| /* |
| * Copyright (c) 2000-2006 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_types.h" |
| #include "xfs_bit.h" |
| #include "xfs_log.h" |
| #include "xfs_inum.h" |
| #include "xfs_trans.h" |
| #include "xfs_sb.h" |
| #include "xfs_ag.h" |
| #include "xfs_dir2.h" |
| #include "xfs_dmapi.h" |
| #include "xfs_mount.h" |
| #include "xfs_bmap_btree.h" |
| #include "xfs_alloc_btree.h" |
| #include "xfs_ialloc_btree.h" |
| #include "xfs_dir2_sf.h" |
| #include "xfs_attr_sf.h" |
| #include "xfs_dinode.h" |
| #include "xfs_inode.h" |
| #include "xfs_inode_item.h" |
| #include "xfs_itable.h" |
| #include "xfs_btree.h" |
| #include "xfs_alloc.h" |
| #include "xfs_ialloc.h" |
| #include "xfs_attr.h" |
| #include "xfs_bmap.h" |
| #include "xfs_acl.h" |
| #include "xfs_error.h" |
| #include "xfs_buf_item.h" |
| #include "xfs_rw.h" |
| |
| /* |
| * This is a subroutine for xfs_write() and other writers (xfs_ioctl) |
| * which clears the setuid and setgid bits when a file is written. |
| */ |
| int |
| xfs_write_clear_setuid( |
| xfs_inode_t *ip) |
| { |
| xfs_mount_t *mp; |
| xfs_trans_t *tp; |
| int error; |
| |
| mp = ip->i_mount; |
| tp = xfs_trans_alloc(mp, XFS_TRANS_WRITEID); |
| if ((error = xfs_trans_reserve(tp, 0, |
| XFS_WRITEID_LOG_RES(mp), |
| 0, 0, 0))) { |
| xfs_trans_cancel(tp, 0); |
| return error; |
| } |
| xfs_ilock(ip, XFS_ILOCK_EXCL); |
| xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); |
| xfs_trans_ihold(tp, ip); |
| ip->i_d.di_mode &= ~S_ISUID; |
| |
| /* |
| * Note that we don't have to worry about mandatory |
| * file locking being disabled here because we only |
| * clear the S_ISGID bit if the Group execute bit is |
| * on, but if it was on then mandatory locking wouldn't |
| * have been enabled. |
| */ |
| if (ip->i_d.di_mode & S_IXGRP) { |
| ip->i_d.di_mode &= ~S_ISGID; |
| } |
| xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); |
| xfs_trans_set_sync(tp); |
| error = xfs_trans_commit(tp, 0); |
| xfs_iunlock(ip, XFS_ILOCK_EXCL); |
| return 0; |
| } |
| |
| /* |
| * Handle logging requirements of various synchronous types of write. |
| */ |
| int |
| xfs_write_sync_logforce( |
| xfs_mount_t *mp, |
| xfs_inode_t *ip) |
| { |
| int error = 0; |
| |
| /* |
| * If we're treating this as O_DSYNC and we have not updated the |
| * size, force the log. |
| */ |
| if (!(mp->m_flags & XFS_MOUNT_OSYNCISOSYNC) && |
| !(ip->i_update_size)) { |
| xfs_inode_log_item_t *iip = ip->i_itemp; |
| |
| /* |
| * If an allocation transaction occurred |
| * without extending the size, then we have to force |
| * the log up the proper point to ensure that the |
| * allocation is permanent. We can't count on |
| * the fact that buffered writes lock out direct I/O |
| * writes - the direct I/O write could have extended |
| * the size nontransactionally, then finished before |
| * we started. xfs_write_file will think that the file |
| * didn't grow but the update isn't safe unless the |
| * size change is logged. |
| * |
| * Force the log if we've committed a transaction |
| * against the inode or if someone else has and |
| * the commit record hasn't gone to disk (e.g. |
| * the inode is pinned). This guarantees that |
| * all changes affecting the inode are permanent |
| * when we return. |
| */ |
| if (iip && iip->ili_last_lsn) { |
| xfs_log_force(mp, iip->ili_last_lsn, |
| XFS_LOG_FORCE | XFS_LOG_SYNC); |
| } else if (xfs_ipincount(ip) > 0) { |
| xfs_log_force(mp, (xfs_lsn_t)0, |
| XFS_LOG_FORCE | XFS_LOG_SYNC); |
| } |
| |
| } else { |
| xfs_trans_t *tp; |
| |
| /* |
| * O_SYNC or O_DSYNC _with_ a size update are handled |
| * the same way. |
| * |
| * If the write was synchronous then we need to make |
| * sure that the inode modification time is permanent. |
| * We'll have updated the timestamp above, so here |
| * we use a synchronous transaction to log the inode. |
| * It's not fast, but it's necessary. |
| * |
| * If this a dsync write and the size got changed |
| * non-transactionally, then we need to ensure that |
| * the size change gets logged in a synchronous |
| * transaction. |
| */ |
| tp = xfs_trans_alloc(mp, XFS_TRANS_WRITE_SYNC); |
| if ((error = xfs_trans_reserve(tp, 0, |
| XFS_SWRITE_LOG_RES(mp), |
| 0, 0, 0))) { |
| /* Transaction reserve failed */ |
| xfs_trans_cancel(tp, 0); |
| } else { |
| /* Transaction reserve successful */ |
| xfs_ilock(ip, XFS_ILOCK_EXCL); |
| xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); |
| xfs_trans_ihold(tp, ip); |
| xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); |
| xfs_trans_set_sync(tp); |
| error = xfs_trans_commit(tp, 0); |
| xfs_iunlock(ip, XFS_ILOCK_EXCL); |
| } |
| } |
| |
| return error; |
| } |
| |
| /* |
| * Force a shutdown of the filesystem instantly while keeping |
| * the filesystem consistent. We don't do an unmount here; just shutdown |
| * the shop, make sure that absolutely nothing persistent happens to |
| * this filesystem after this point. |
| */ |
| void |
| xfs_do_force_shutdown( |
| xfs_mount_t *mp, |
| int flags, |
| char *fname, |
| int lnnum) |
| { |
| int logerror; |
| |
| logerror = flags & SHUTDOWN_LOG_IO_ERROR; |
| |
| if (!(flags & SHUTDOWN_FORCE_UMOUNT)) { |
| cmn_err(CE_NOTE, "xfs_force_shutdown(%s,0x%x) called from " |
| "line %d of file %s. Return address = 0x%p", |
| mp->m_fsname, flags, lnnum, fname, __return_address); |
| } |
| /* |
| * No need to duplicate efforts. |
| */ |
| if (XFS_FORCED_SHUTDOWN(mp) && !logerror) |
| return; |
| |
| /* |
| * This flags XFS_MOUNT_FS_SHUTDOWN, makes sure that we don't |
| * queue up anybody new on the log reservations, and wakes up |
| * everybody who's sleeping on log reservations to tell them |
| * the bad news. |
| */ |
| if (xfs_log_force_umount(mp, logerror)) |
| return; |
| |
| if (flags & SHUTDOWN_CORRUPT_INCORE) { |
| xfs_cmn_err(XFS_PTAG_SHUTDOWN_CORRUPT, CE_ALERT, mp, |
| "Corruption of in-memory data detected. Shutting down filesystem: %s", |
| mp->m_fsname); |
| if (XFS_ERRLEVEL_HIGH <= xfs_error_level) { |
| xfs_stack_trace(); |
| } |
| } else if (!(flags & SHUTDOWN_FORCE_UMOUNT)) { |
| if (logerror) { |
| xfs_cmn_err(XFS_PTAG_SHUTDOWN_LOGERROR, CE_ALERT, mp, |
| "Log I/O Error Detected. Shutting down filesystem: %s", |
| mp->m_fsname); |
| } else if (flags & SHUTDOWN_DEVICE_REQ) { |
| xfs_cmn_err(XFS_PTAG_SHUTDOWN_IOERROR, CE_ALERT, mp, |
| "All device paths lost. Shutting down filesystem: %s", |
| mp->m_fsname); |
| } else if (!(flags & SHUTDOWN_REMOTE_REQ)) { |
| xfs_cmn_err(XFS_PTAG_SHUTDOWN_IOERROR, CE_ALERT, mp, |
| "I/O Error Detected. Shutting down filesystem: %s", |
| mp->m_fsname); |
| } |
| } |
| if (!(flags & SHUTDOWN_FORCE_UMOUNT)) { |
| cmn_err(CE_ALERT, "Please umount the filesystem, " |
| "and rectify the problem(s)"); |
| } |
| } |
| |
| |
| /* |
| * Called when we want to stop a buffer from getting written or read. |
| * We attach the EIO error, muck with its flags, and call biodone |
| * so that the proper iodone callbacks get called. |
| */ |
| int |
| xfs_bioerror( |
| xfs_buf_t *bp) |
| { |
| |
| #ifdef XFSERRORDEBUG |
| ASSERT(XFS_BUF_ISREAD(bp) || bp->b_iodone); |
| #endif |
| |
| /* |
| * No need to wait until the buffer is unpinned. |
| * We aren't flushing it. |
| */ |
| xfs_buftrace("XFS IOERROR", bp); |
| XFS_BUF_ERROR(bp, EIO); |
| /* |
| * We're calling biodone, so delete B_DONE flag. Either way |
| * we have to call the iodone callback, and calling biodone |
| * probably is the best way since it takes care of |
| * GRIO as well. |
| */ |
| XFS_BUF_UNREAD(bp); |
| XFS_BUF_UNDELAYWRITE(bp); |
| XFS_BUF_UNDONE(bp); |
| XFS_BUF_STALE(bp); |
| |
| XFS_BUF_CLR_BDSTRAT_FUNC(bp); |
| xfs_biodone(bp); |
| |
| return (EIO); |
| } |
| |
| /* |
| * Same as xfs_bioerror, except that we are releasing the buffer |
| * here ourselves, and avoiding the biodone call. |
| * This is meant for userdata errors; metadata bufs come with |
| * iodone functions attached, so that we can track down errors. |
| */ |
| int |
| xfs_bioerror_relse( |
| xfs_buf_t *bp) |
| { |
| int64_t fl; |
| |
| ASSERT(XFS_BUF_IODONE_FUNC(bp) != xfs_buf_iodone_callbacks); |
| ASSERT(XFS_BUF_IODONE_FUNC(bp) != xlog_iodone); |
| |
| xfs_buftrace("XFS IOERRELSE", bp); |
| fl = XFS_BUF_BFLAGS(bp); |
| /* |
| * No need to wait until the buffer is unpinned. |
| * We aren't flushing it. |
| * |
| * chunkhold expects B_DONE to be set, whether |
| * we actually finish the I/O or not. We don't want to |
| * change that interface. |
| */ |
| XFS_BUF_UNREAD(bp); |
| XFS_BUF_UNDELAYWRITE(bp); |
| XFS_BUF_DONE(bp); |
| XFS_BUF_STALE(bp); |
| XFS_BUF_CLR_IODONE_FUNC(bp); |
| XFS_BUF_CLR_BDSTRAT_FUNC(bp); |
| if (!(fl & XFS_B_ASYNC)) { |
| /* |
| * Mark b_error and B_ERROR _both_. |
| * Lot's of chunkcache code assumes that. |
| * There's no reason to mark error for |
| * ASYNC buffers. |
| */ |
| XFS_BUF_ERROR(bp, EIO); |
| XFS_BUF_V_IODONESEMA(bp); |
| } else { |
| xfs_buf_relse(bp); |
| } |
| return (EIO); |
| } |
| |
| /* |
| * Prints out an ALERT message about I/O error. |
| */ |
| void |
| xfs_ioerror_alert( |
| char *func, |
| struct xfs_mount *mp, |
| xfs_buf_t *bp, |
| xfs_daddr_t blkno) |
| { |
| cmn_err(CE_ALERT, |
| "I/O error in filesystem (\"%s\") meta-data dev %s block 0x%llx" |
| " (\"%s\") error %d buf count %zd", |
| (!mp || !mp->m_fsname) ? "(fs name not set)" : mp->m_fsname, |
| XFS_BUFTARG_NAME(XFS_BUF_TARGET(bp)), |
| (__uint64_t)blkno, func, |
| XFS_BUF_GETERROR(bp), XFS_BUF_COUNT(bp)); |
| } |
| |
| /* |
| * This isn't an absolute requirement, but it is |
| * just a good idea to call xfs_read_buf instead of |
| * directly doing a read_buf call. For one, we shouldn't |
| * be doing this disk read if we are in SHUTDOWN state anyway, |
| * so this stops that from happening. Secondly, this does all |
| * the error checking stuff and the brelse if appropriate for |
| * the caller, so the code can be a little leaner. |
| */ |
| |
| int |
| xfs_read_buf( |
| struct xfs_mount *mp, |
| xfs_buftarg_t *target, |
| xfs_daddr_t blkno, |
| int len, |
| uint flags, |
| xfs_buf_t **bpp) |
| { |
| xfs_buf_t *bp; |
| int error; |
| |
| if (flags) |
| bp = xfs_buf_read_flags(target, blkno, len, flags); |
| else |
| bp = xfs_buf_read(target, blkno, len, flags); |
| if (!bp) |
| return XFS_ERROR(EIO); |
| error = XFS_BUF_GETERROR(bp); |
| if (bp && !error && !XFS_FORCED_SHUTDOWN(mp)) { |
| *bpp = bp; |
| } else { |
| *bpp = NULL; |
| if (error) { |
| xfs_ioerror_alert("xfs_read_buf", mp, bp, XFS_BUF_ADDR(bp)); |
| } else { |
| error = XFS_ERROR(EIO); |
| } |
| if (bp) { |
| XFS_BUF_UNDONE(bp); |
| XFS_BUF_UNDELAYWRITE(bp); |
| XFS_BUF_STALE(bp); |
| /* |
| * brelse clears B_ERROR and b_error |
| */ |
| xfs_buf_relse(bp); |
| } |
| } |
| return (error); |
| } |
| |
| /* |
| * Wrapper around bwrite() so that we can trap |
| * write errors, and act accordingly. |
| */ |
| int |
| xfs_bwrite( |
| struct xfs_mount *mp, |
| struct xfs_buf *bp) |
| { |
| int error; |
| |
| /* |
| * XXXsup how does this work for quotas. |
| */ |
| XFS_BUF_SET_BDSTRAT_FUNC(bp, xfs_bdstrat_cb); |
| XFS_BUF_SET_FSPRIVATE3(bp, mp); |
| XFS_BUF_WRITE(bp); |
| |
| if ((error = XFS_bwrite(bp))) { |
| ASSERT(mp); |
| /* |
| * Cannot put a buftrace here since if the buffer is not |
| * B_HOLD then we will brelse() the buffer before returning |
| * from bwrite and we could be tracing a buffer that has |
| * been reused. |
| */ |
| xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR); |
| } |
| return (error); |
| } |