| /* |
| * arch/arm/mach-kirkwood/pcie.c |
| * |
| * PCIe functions for Marvell Kirkwood SoCs |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/mbus.h> |
| #include <asm/irq.h> |
| #include <asm/mach/pci.h> |
| #include <plat/pcie.h> |
| #include <mach/bridge-regs.h> |
| #include "common.h" |
| |
| void kirkwood_enable_pcie(void) |
| { |
| u32 curr = readl(CLOCK_GATING_CTRL); |
| if (!(curr & CGC_PEX0)) |
| writel(curr | CGC_PEX0, CLOCK_GATING_CTRL); |
| } |
| |
| void __init kirkwood_pcie_id(u32 *dev, u32 *rev) |
| { |
| kirkwood_enable_pcie(); |
| *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE); |
| *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE); |
| } |
| |
| struct pcie_port { |
| u8 root_bus_nr; |
| void __iomem *base; |
| spinlock_t conf_lock; |
| int irq; |
| struct resource res[2]; |
| }; |
| |
| static int pcie_port_map[2]; |
| static int num_pcie_ports; |
| |
| static inline struct pcie_port *bus_to_port(struct pci_bus *bus) |
| { |
| struct pci_sys_data *sys = bus->sysdata; |
| return sys->private_data; |
| } |
| |
| static int pcie_valid_config(struct pcie_port *pp, int bus, int dev) |
| { |
| /* |
| * Don't go out when trying to access -- |
| * 1. nonexisting device on local bus |
| * 2. where there's no device connected (no link) |
| */ |
| if (bus == pp->root_bus_nr && dev == 0) |
| return 1; |
| |
| if (!orion_pcie_link_up(pp->base)) |
| return 0; |
| |
| if (bus == pp->root_bus_nr && dev != 1) |
| return 0; |
| |
| return 1; |
| } |
| |
| |
| /* |
| * PCIe config cycles are done by programming the PCIE_CONF_ADDR register |
| * and then reading the PCIE_CONF_DATA register. Need to make sure these |
| * transactions are atomic. |
| */ |
| |
| static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, |
| int size, u32 *val) |
| { |
| struct pcie_port *pp = bus_to_port(bus); |
| unsigned long flags; |
| int ret; |
| |
| if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) { |
| *val = 0xffffffff; |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| } |
| |
| spin_lock_irqsave(&pp->conf_lock, flags); |
| ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val); |
| spin_unlock_irqrestore(&pp->conf_lock, flags); |
| |
| return ret; |
| } |
| |
| static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, |
| int where, int size, u32 val) |
| { |
| struct pcie_port *pp = bus_to_port(bus); |
| unsigned long flags; |
| int ret; |
| |
| if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| spin_lock_irqsave(&pp->conf_lock, flags); |
| ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val); |
| spin_unlock_irqrestore(&pp->conf_lock, flags); |
| |
| return ret; |
| } |
| |
| static struct pci_ops pcie_ops = { |
| .read = pcie_rd_conf, |
| .write = pcie_wr_conf, |
| }; |
| |
| static void __init pcie0_ioresources_init(struct pcie_port *pp) |
| { |
| pp->base = (void __iomem *)PCIE_VIRT_BASE; |
| pp->irq = IRQ_KIRKWOOD_PCIE; |
| |
| /* |
| * IORESOURCE_IO |
| */ |
| pp->res[0].name = "PCIe 0 I/O Space"; |
| pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; |
| pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; |
| pp->res[0].flags = IORESOURCE_IO; |
| |
| /* |
| * IORESOURCE_MEM |
| */ |
| pp->res[1].name = "PCIe 0 MEM"; |
| pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; |
| pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; |
| pp->res[1].flags = IORESOURCE_MEM; |
| } |
| |
| static void __init pcie1_ioresources_init(struct pcie_port *pp) |
| { |
| pp->base = (void __iomem *)PCIE1_VIRT_BASE; |
| pp->irq = IRQ_KIRKWOOD_PCIE1; |
| |
| /* |
| * IORESOURCE_IO |
| */ |
| pp->res[0].name = "PCIe 1 I/O Space"; |
| pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE; |
| pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1; |
| pp->res[0].flags = IORESOURCE_IO; |
| |
| /* |
| * IORESOURCE_MEM |
| */ |
| pp->res[1].name = "PCIe 1 MEM"; |
| pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE; |
| pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1; |
| pp->res[1].flags = IORESOURCE_MEM; |
| } |
| |
| static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) |
| { |
| extern unsigned int kirkwood_clk_ctrl; |
| struct pcie_port *pp; |
| int index; |
| |
| if (nr >= num_pcie_ports) |
| return 0; |
| |
| index = pcie_port_map[nr]; |
| printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index); |
| |
| pp = kzalloc(sizeof(*pp), GFP_KERNEL); |
| if (!pp) |
| panic("PCIe: failed to allocate pcie_port data"); |
| sys->private_data = pp; |
| pp->root_bus_nr = sys->busnr; |
| spin_lock_init(&pp->conf_lock); |
| |
| switch (index) { |
| case 0: |
| kirkwood_clk_ctrl |= CGC_PEX0; |
| pcie0_ioresources_init(pp); |
| break; |
| case 1: |
| kirkwood_clk_ctrl |= CGC_PEX1; |
| pcie1_ioresources_init(pp); |
| break; |
| default: |
| panic("PCIe setup: invalid controller %d", index); |
| } |
| |
| if (request_resource(&ioport_resource, &pp->res[0])) |
| panic("Request PCIe%d IO resource failed\n", index); |
| if (request_resource(&iomem_resource, &pp->res[1])) |
| panic("Request PCIe%d Memory resource failed\n", index); |
| |
| sys->resource[0] = &pp->res[0]; |
| sys->resource[1] = &pp->res[1]; |
| sys->resource[2] = NULL; |
| sys->io_offset = 0; |
| |
| /* |
| * Generic PCIe unit setup. |
| */ |
| orion_pcie_set_local_bus_nr(pp->base, sys->busnr); |
| |
| orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info); |
| |
| return 1; |
| } |
| |
| static void __devinit rc_pci_fixup(struct pci_dev *dev) |
| { |
| /* |
| * Prevent enumeration of root complex. |
| */ |
| if (dev->bus->parent == NULL && dev->devfn == 0) { |
| int i; |
| |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| dev->resource[i].start = 0; |
| dev->resource[i].end = 0; |
| dev->resource[i].flags = 0; |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); |
| |
| static struct pci_bus __init * |
| kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) |
| { |
| struct pci_bus *bus; |
| |
| if (nr < num_pcie_ports) { |
| bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); |
| } else { |
| bus = NULL; |
| BUG(); |
| } |
| |
| return bus; |
| } |
| |
| static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, |
| u8 pin) |
| { |
| struct pcie_port *pp = bus_to_port(dev->bus); |
| |
| return pp->irq; |
| } |
| |
| static struct hw_pci kirkwood_pci __initdata = { |
| .swizzle = pci_std_swizzle, |
| .setup = kirkwood_pcie_setup, |
| .scan = kirkwood_pcie_scan_bus, |
| .map_irq = kirkwood_pcie_map_irq, |
| }; |
| |
| static void __init add_pcie_port(int index, unsigned long base) |
| { |
| printk(KERN_INFO "Kirkwood PCIe port %d: ", index); |
| |
| if (orion_pcie_link_up((void __iomem *)base)) { |
| printk(KERN_INFO "link up\n"); |
| pcie_port_map[num_pcie_ports++] = index; |
| } else |
| printk(KERN_INFO "link down, ignoring\n"); |
| } |
| |
| void __init kirkwood_pcie_init(unsigned int portmask) |
| { |
| if (portmask & KW_PCIE0) |
| add_pcie_port(0, PCIE_VIRT_BASE); |
| |
| if (portmask & KW_PCIE1) |
| add_pcie_port(1, PCIE1_VIRT_BASE); |
| |
| kirkwood_pci.nr_controllers = num_pcie_ports; |
| pci_common_init(&kirkwood_pci); |
| } |