diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 3e1c472..9e2148a 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -1,9 +1,7 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-common.h - common header file for device-specific source files also.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-common.h - common header file for device-specific source files
+ * see flexcop.c for copyright information
  */
 #ifndef __FLEXCOP_COMMON_H__
 #define __FLEXCOP_COMMON_H__
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index f7afab5..3f485bf 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -1,34 +1,27 @@
 /*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling
+ * see flexcop.c for copyright information
  */
 #include <media/tuner.h>
-
 #include "flexcop.h"
-
-#include "stv0299.h"
-#include "mt352.h"
-#include "nxt200x.h"
-#include "bcm3510.h"
-#include "stv0297.h"
 #include "mt312.h"
-#include "lgdt330x.h"
-#include "dvb-pll.h"
-#include "tuner-simple.h"
-
+#include "stv0299.h"
 #include "s5h1420.h"
 #include "itd1000.h"
-
-#include "cx24123.h"
 #include "cx24113.h"
-
+#include "cx24123.h"
 #include "isl6421.h"
+#include "mt352.h"
+#include "bcm3510.h"
+#include "nxt200x.h"
+#include "dvb-pll.h"
+#include "lgdt330x.h"
+#include "tuner-simple.h"
+#include "stv0297.h"
 
 /* lnb control */
-
+#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -37,65 +30,62 @@
 
 	v = fc->read_ibi_reg(fc, misc_204);
 	switch (voltage) {
-		case SEC_VOLTAGE_OFF:
-			v.misc_204.ACPI1_sig = 1;
-			break;
-		case SEC_VOLTAGE_13:
-			v.misc_204.ACPI1_sig = 0;
-			v.misc_204.LNB_L_H_sig = 0;
-			break;
-		case SEC_VOLTAGE_18:
-			v.misc_204.ACPI1_sig = 0;
-			v.misc_204.LNB_L_H_sig = 1;
-			break;
-		default:
-			err("unknown SEC_VOLTAGE value");
-			return -EINVAL;
+	case SEC_VOLTAGE_OFF:
+		v.misc_204.ACPI1_sig = 1;
+		break;
+	case SEC_VOLTAGE_13:
+		v.misc_204.ACPI1_sig = 0;
+		v.misc_204.LNB_L_H_sig = 0;
+		break;
+	case SEC_VOLTAGE_18:
+		v.misc_204.ACPI1_sig = 0;
+		v.misc_204.LNB_L_H_sig = 1;
+		break;
+	default:
+		err("unknown SEC_VOLTAGE value");
+		return -EINVAL;
 	}
 	return fc->write_ibi_reg(fc, misc_204, v);
 }
+#endif
 
+#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
+	|| defined(CONFIG_DVB_MT312_MODULE)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
-/*	flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
-
 	if (fc->fe_sleep)
 		return fc->fe_sleep(fe);
-
-/*	v.misc_204.ACPI3_sig = 1;
-	fc->write_ibi_reg(fc,misc_204,v);*/
-
 	return 0;
 }
+#endif
 
+/* SkyStar2 DVB-S rev 2.3 */
+#if defined(CONFIG_DVB_MT312_MODULE)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
-	/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
+/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
 	struct flexcop_device *fc = fe->dvb->priv;
 	flexcop_ibi_value v;
 	u16 ax;
 	v.raw = 0;
-
 	deb_tuner("tone = %u\n",tone);
 
 	switch (tone) {
-		case SEC_TONE_ON:
-			ax = 0x01ff;
-			break;
-		case SEC_TONE_OFF:
-			ax = 0;
-			break;
-		default:
-			err("unknown SEC_TONE value");
-			return -EINVAL;
+	case SEC_TONE_ON:
+		ax = 0x01ff;
+		break;
+	case SEC_TONE_OFF:
+		ax = 0;
+		break;
+	default:
+		err("unknown SEC_TONE value");
+		return -EINVAL;
 	}
 
 	v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
-
 	v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
 	v.lnb_switch_freq_200.LNB_CTLLowCount_sig  = ax == 0 ? 0x1ff : ax;
-
 	return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
 }
 
@@ -110,17 +100,16 @@
 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
 {
 	int i, par = 1, d;
-
 	for (i = 7; i >= 0; i--) {
 		d = (data >> i) & 1;
 		par ^= d;
 		flexcop_diseqc_send_bit(fe, d);
 	}
-
 	flexcop_diseqc_send_bit(fe, par);
 }
 
-static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
+static int flexcop_send_diseqc_msg(struct dvb_frontend *fe,
+	int len, u8 *msg, unsigned long burst)
 {
 	int i;
 
@@ -129,7 +118,6 @@
 
 	for (i = 0; i < len; i++)
 		flexcop_diseqc_send_byte(fe,msg[i]);
-
 	mdelay(16);
 
 	if (burst != -1) {
@@ -146,197 +134,30 @@
 	return 0;
 }
 
-static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe,
+	struct dvb_diseqc_master_cmd *cmd)
 {
 	return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
 }
 
-static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+static int flexcop_diseqc_send_burst(struct dvb_frontend *fe,
+	fe_sec_mini_cmd_t minicmd)
 {
 	return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
 }
 
-/* dvb-s stv0299 */
-static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
+static struct mt312_config skystar23_samsung_tbdu18132_config = {
+	.demod_address = 0x0e,
+};
 
-	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg (fe, 0x13, aclk);
-	stv0299_writereg (fe, 0x14, bclk);
-	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
-
-	return 0;
-}
-
-static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
+static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
 {
 	u8 buf[4];
 	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf,
+	.len = sizeof(buf) };
 	struct flexcop_device *fc = fe->dvb->priv;
-
-	div = params->frequency / 125;
-
-	buf[0] = (div >> 8) & 0x7f;
-	buf[1] = div & 0xff;
-	buf[2] = 0x84;  /* 0xC4 */
-	buf[3] = 0x08;
-
-	if (params->frequency < 1500000)
-		buf[3] |= 0x10;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
-static u8 samsung_tbmu24112_inittab[] = {
-	     0x01, 0x15,
-	     0x02, 0x30,
-	     0x03, 0x00,
-	     0x04, 0x7D,
-	     0x05, 0x35,
-	     0x06, 0x02,
-	     0x07, 0x00,
-	     0x08, 0xC3,
-	     0x0C, 0x00,
-	     0x0D, 0x81,
-	     0x0E, 0x23,
-	     0x0F, 0x12,
-	     0x10, 0x7E,
-	     0x11, 0x84,
-	     0x12, 0xB9,
-	     0x13, 0x88,
-	     0x14, 0x89,
-	     0x15, 0xC9,
-	     0x16, 0x00,
-	     0x17, 0x5C,
-	     0x18, 0x00,
-	     0x19, 0x00,
-	     0x1A, 0x00,
-	     0x1C, 0x00,
-	     0x1D, 0x00,
-	     0x1E, 0x00,
-	     0x1F, 0x3A,
-	     0x20, 0x2E,
-	     0x21, 0x80,
-	     0x22, 0xFF,
-	     0x23, 0xC1,
-	     0x28, 0x00,
-	     0x29, 0x1E,
-	     0x2A, 0x14,
-	     0x2B, 0x0F,
-	     0x2C, 0x09,
-	     0x2D, 0x05,
-	     0x31, 0x1F,
-	     0x32, 0x19,
-	     0x33, 0xFE,
-	     0x34, 0x93,
-	     0xff, 0xff,
-};
-
-static struct stv0299_config samsung_tbmu24112_config = {
-	.demod_address = 0x68,
-	.inittab = samsung_tbmu24112_inittab,
-	.mclk = 88000000UL,
-	.invert = 0,
-	.skip_reinit = 0,
-	.lock_output = STV0299_LOCKOUTPUT_LK,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
-};
-
-/* dvb-t mt352 */
-static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
-{
-	static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
-	static u8 mt352_reset [] = { 0x50, 0x80 };
-	static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
-	static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
-	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
-	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
-	udelay(2000);
-	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
-	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
-
-	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
-	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
-
-	return 0;
-}
-
-static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
-{
-	u32 div;
-	unsigned char bs = 0;
-
-	if (buf_len < 5)
-		return -EINVAL;
-
-	#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
-	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
-
-	if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
-	if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
-	if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
-
-	pllbuf[0] = 0x61;
-	pllbuf[1] = div >> 8;
-	pllbuf[2] = div & 0xff;
-	pllbuf[3] = 0xcc;
-	pllbuf[4] = bs;
-
-	return 5;
-}
-
-static struct mt352_config samsung_tdtc9251dh0_config = {
-	.demod_address = 0x0f,
-	.demod_init    = samsung_tdtc9251dh0_demod_init,
-};
-
-static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	return request_firmware(fw, name, fc->dev);
-}
-
-static struct lgdt330x_config air2pc_atsc_hd5000_config = {
-	.demod_address       = 0x59,
-	.demod_chip          = LGDT3303,
-	.serial_mpeg         = 0x04,
-	.clock_polarity_flip = 1,
-};
-
-static struct nxt200x_config samsung_tbmv_config = {
-	.demod_address    = 0x0a,
-};
-
-static struct bcm3510_config air2pc_atsc_first_gen_config = {
-	.demod_address    = 0x0f,
-	.request_firmware = flexcop_fe_request_firmware,
-};
-
-static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
-{
-	u8 buf[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
-	struct flexcop_device *fc = fe->dvb->priv;
-
 	div = (params->frequency + (125/2)) / 125;
 
 	buf[0] = (div >> 8) & 0x7f;
@@ -354,24 +175,379 @@
 	return 0;
 }
 
-static struct mt312_config skystar23_samsung_tbdu18132_config = {
+static void skystar2_rev23_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(mt312_attach,
+			&skystar23_samsung_tbdu18132_config, i2c);
+	if (fc->fe != NULL) {
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
+		ops->tuner_ops.set_params \
+			= skystar23_samsung_tbdu18132_tuner_set_params;
+		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
+		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
+		ops->set_tone               = flexcop_set_tone;
+		ops->set_voltage            = flexcop_set_voltage;
+		fc->fe_sleep                = ops->sleep;
+		ops->sleep                  = flexcop_sleep;
+		fc->dev_type                = FC_SKY_REV23;
+	}
+}
+#endif
 
-	.demod_address = 0x0e,
+/* SkyStar2 DVB-S rev 2.6 */
+#if defined(CONFIG_DVB_STV0299_MODULE)
+static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
+	u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7; bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7; bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7; bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7; bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6; bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4; bclk = 0x51;
+	}
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21,  ratio        & 0xf0);
+	return 0;
+}
+
+static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
+{
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = {
+	.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	struct flexcop_device *fc = fe->dvb->priv;
+	div = params->frequency / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x84; /* 0xC4 */
+	buf[3] = 0x08;
+
+	if (params->frequency < 1500000)
+		buf[3] |= 0x10;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static u8 samsung_tbmu24112_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7D,
+	0x05, 0x35,
+	0x06, 0x02,
+	0x07, 0x00,
+	0x08, 0xC3,
+	0x0C, 0x00,
+	0x0D, 0x81,
+	0x0E, 0x23,
+	0x0F, 0x12,
+	0x10, 0x7E,
+	0x11, 0x84,
+	0x12, 0xB9,
+	0x13, 0x88,
+	0x14, 0x89,
+	0x15, 0xC9,
+	0x16, 0x00,
+	0x17, 0x5C,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1A, 0x00,
+	0x1C, 0x00,
+	0x1D, 0x00,
+	0x1E, 0x00,
+	0x1F, 0x3A,
+	0x20, 0x2E,
+	0x21, 0x80,
+	0x22, 0xFF,
+	0x23, 0xC1,
+	0x28, 0x00,
+	0x29, 0x1E,
+	0x2A, 0x14,
+	0x2B, 0x0F,
+	0x2C, 0x09,
+	0x2D, 0x05,
+	0x31, 0x1F,
+	0x32, 0x19,
+	0x33, 0xFE,
+	0x34, 0x93,
+	0xff, 0xff,
 };
 
+static struct stv0299_config samsung_tbmu24112_config = {
+	.demod_address = 0x68,
+	.inittab = samsung_tbmu24112_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_LK,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
+};
+
+static void skystar2_rev26_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
+	if (fc->fe != NULL) {
+		struct dvb_frontend_ops *ops  = &fc->fe->ops;
+		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
+		ops->set_voltage = flexcop_set_voltage;
+		fc->fe_sleep = ops->sleep;
+		ops->sleep = flexcop_sleep;
+	}
+}
+#endif
+
+/* SkyStar2 DVB-S rev 2.7 */
+#if defined(CONFIG_DVB_S5H1420_MODULE)
+static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
+	.demod_address = 0x53,
+	.invert = 1,
+	.repeated_start_workaround = 1,
+	.serial_mpeg = 1,
+};
+
+static struct itd1000_config skystar2_rev2_7_itd1000_config = {
+	.i2c_address = 0x61,
+};
+
+static void skystar2_rev27_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	/* enable no_base_addr - no repeated start when reading */
+	fc->fc_i2c_adap[0].no_base_addr = 1;
+	fc->fe = dvb_attach(s5h1420_attach,
+		&skystar2_rev2_7_s5h1420_config, i2c);
+	if (fc->fe != NULL) {
+		flexcop_ibi_value r108;
+		struct i2c_adapter *i2c_tuner \
+		= s5h1420_get_tuner_i2c_adapter(fc->fe);
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
+
+		fc->fe_sleep = ops->sleep;
+		ops->sleep   = flexcop_sleep;
+
+		/* enable no_base_addr - no repeated start when reading */
+		fc->fc_i2c_adap[2].no_base_addr = 1;
+		if (dvb_attach(isl6421_attach, fc->fe,
+			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
+			err("ISL6421 could NOT be attached");
+		else
+			info("ISL6421 successfully attached");
+
+		/* the ITD1000 requires a lower i2c clock - is it a problem ? */
+		r108.raw = 0x00000506;
+		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
+		if (i2c_tuner) {
+			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner,
+				&skystar2_rev2_7_itd1000_config) == NULL)
+				err("ITD1000 could NOT be attached");
+			else
+				info("ITD1000 successfully attached");
+		}
+	} else
+		fc->fc_i2c_adap[0].no_base_addr = 0;
+		/* for the next devices we need it again */
+}
+#endif
+
+/* SkyStar2 rev 2.8 */
+#if defined(CONFIG_DVB_CX24123_MODULE)
+static struct cx24123_config skystar2_rev2_8_cx24123_config = {
+	.demod_address = 0x55,
+	.dont_use_pll = 1,
+	.agc_callback = cx24113_agc_callback,
+};
+
+static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
+	.i2c_addr = 0x54,
+	.xtal_khz = 10111,
+};
+
+static void skystar2_rev28_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(cx24123_attach,
+			&skystar2_rev2_8_cx24123_config, i2c);
+	if (fc->fe != NULL) {
+		struct i2c_adapter *i2c_tuner \
+			= cx24123_get_tuner_i2c_adapter(fc->fe);
+		if (i2c_tuner != NULL) {
+			if (dvb_attach(cx24113_attach, fc->fe,
+						&skystar2_rev2_8_cx24113_config,
+						i2c_tuner) == NULL)
+				err("CX24113 could NOT be attached");
+			else
+				info("CX24113 successfully attached");
+		}
+
+		fc->fc_i2c_adap[2].no_base_addr = 1;
+		if (dvb_attach(isl6421_attach, fc->fe,
+			&fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
+			err("ISL6421 could NOT be attached");
+		else
+			info("ISL6421 successfully attached");
+	/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
+	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
+	}
+}
+#endif
+
+/* AirStar DVB-T */
+#if defined(CONFIG_DVB_MT352_MODULE)
+static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
+{
+	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
+	static u8 mt352_reset[] = { 0x50, 0x80 };
+	static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 };
+	static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
+	udelay(2000);
+	mt352_write(fe, mt352_reset, sizeof(mt352_reset));
+	mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
+	mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
+	mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
+	return 0;
+}
+
+static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
+{
+	u32 div;
+	unsigned char bs = 0;
+
+	if (buf_len < 5)
+		return -EINVAL;
+
+#define IF_FREQUENCYx6 217    /* 6 * 36.16666666667MHz */
+	div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
+	if (params->frequency >= 48000000 && params->frequency <= 154000000) \
+		bs = 0x09;
+	if (params->frequency >= 161000000 && params->frequency <= 439000000) \
+		bs = 0x0a;
+	if (params->frequency >= 447000000 && params->frequency <= 863000000) \
+		bs = 0x08;
+
+	pllbuf[0] = 0x61;
+	pllbuf[1] = div >> 8;
+	pllbuf[2] = div & 0xff;
+	pllbuf[3] = 0xcc;
+	pllbuf[4] = bs;
+	return 5;
+}
+
+static struct mt352_config samsung_tdtc9251dh0_config = {
+	.demod_address = 0x0f,
+	.demod_init    = samsung_tdtc9251dh0_demod_init,
+};
+
+static void airstar_dvbt_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
+	if (fc->fe != NULL)
+		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
+}
+#endif
+
+/* AirStar ATSC 1st generation */
+#if defined(CONFIG_DVB_BCM3510_MODULE)
+static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
+	const struct firmware **fw, char* name)
+{
+	struct flexcop_device *fc = fe->dvb->priv;
+	return request_firmware(fw, name, fc->dev);
+}
+
+static struct bcm3510_config air2pc_atsc_first_gen_config = {
+	.demod_address    = 0x0f,
+	.request_firmware = flexcop_fe_request_firmware,
+};
+
+static void airstar_atsc1_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
+}
+#endif
+
+/* AirStar ATSC 2nd generation */
+#if defined(CONFIG_DVB_NXT200X_MODULE)
+static struct nxt200x_config samsung_tbmv_config = {
+	.demod_address = 0x0a,
+};
+
+static void airstar_atsc2_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
+	if (fc->fe != NULL)
+		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
+				DVB_PLL_SAMSUNG_TBMV);
+}
+#endif
+
+/* AirStar ATSC 3rd generation */
+#if defined(CONFIG_DVB_LGDT330X_MODULE)
+static struct lgdt330x_config air2pc_atsc_hd5000_config = {
+	.demod_address       = 0x59,
+	.demod_chip          = LGDT3303,
+	.serial_mpeg         = 0x04,
+	.clock_polarity_flip = 1,
+};
+
+static void airstar_atsc3_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
+{
+	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
+	if (fc->fe != NULL) {
+		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
+				TUNER_LG_TDVS_H06XF);
+	}
+}
+#endif
+
+/* CableStar2 DVB-C */
+#if defined(CONFIG_DVB_STV0297_MODULE)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
-					       struct dvb_frontend_parameters *fep)
+		struct dvb_frontend_parameters *fep)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
 	u8 buf[4];
 	u16 div;
 	int ret;
 
-/*  62.5 kHz * 10 */
+/* 62.5 kHz * 10 */
 #define REF_FREQ    625
 #define FREQ_OFFSET 36125
 
-	div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10)  / REF_FREQ; // 4 MHz = 4000 KHz
+	div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ;
+/* 4 MHz = 4000 KHz */
 
 	buf[0] = (u8)( div >> 8) & 0x7f;
 	buf[1] = (u8)        div & 0xff;
@@ -384,11 +560,11 @@
  * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
 	buf[2] = 0x95;
 
-// Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
-//  47 - 153   0  *  0   0   0   0   0   1   0x01
-// 153 - 430   0  *  0   0   0   0   1   0   0x02
-// 430 - 822   0  *  0   0   1   0   0   0   0x08
-// 822 - 862   1  *  0   0   1   0   0   0   0x88
+/* Range(MHz)  C1 *  RE RTS BS4 BS3 BS2 BS1  Byte 5
+ *  47 - 153   0  *  0   0   0   0   0   1   0x01
+ * 153 - 430   0  *  0   0   0   0   1   0   0x02
+ * 430 - 822   0  *  0   0   1   0   0   0   0x08
+ * 822 - 862   1  *  0   0   1   0   0   0   0x88 */
 
 	     if (fep->frequency <= 153000000) buf[3] = 0x01;
 	else if (fep->frequency <= 430000000) buf[3] = 0x02;
@@ -397,11 +573,11 @@
 
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
-	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
+	deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency,
+	buf[0], buf[1], buf[2], buf[3]);
 	ret = fc->i2c_request(&fc->fc_i2c_adap[2],
-		FC_WRITE, 0x61, buf[0], &buf[1], 3);
+			FC_WRITE, 0x61, buf[0], &buf[1], 3);
 	deb_tuner("tuner write returned: %d\n",ret);
-
 	return ret;
 }
 
@@ -481,190 +657,75 @@
 static struct stv0297_config alps_tdee4_stv0297_config = {
 	.demod_address = 0x1c,
 	.inittab = alps_tdee4_stv0297_inittab,
-//	.invert = 1,
-//	.pll_set = alps_tdee4_stv0297_pll_set,
 };
 
-
-/* SkyStar2 rev2.7 (a/u) */
-static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
-	.demod_address = 0x53,
-	.invert = 1,
-	.repeated_start_workaround = 1,
-	.serial_mpeg = 1,
-};
-
-static struct itd1000_config skystar2_rev2_7_itd1000_config = {
-	.i2c_address = 0x61,
-};
-
-/* SkyStar2 rev2.8 */
-static struct cx24123_config skystar2_rev2_8_cx24123_config = {
-	.demod_address = 0x55,
-	.dont_use_pll = 1,
-	.agc_callback = cx24113_agc_callback,
-};
-
-static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
-	.i2c_addr = 0x54,
-	.xtal_khz = 10111,
-};
-
-/* try to figure out the frontend, each card/box can have on of the following list */
-int flexcop_frontend_init(struct flexcop_device *fc)
+static void cablestar2_attach(struct flexcop_device *fc,
+	struct i2c_adapter *i2c)
 {
-	struct dvb_frontend_ops *ops;
-	struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
-	struct i2c_adapter *i2c_tuner;
-
-	/* enable no_base_addr - no repeated start when reading */
-	fc->fc_i2c_adap[0].no_base_addr = 1;
-	fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c);
-	if (fc->fe != NULL) {
-		flexcop_ibi_value r108;
-		i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
-		ops = &fc->fe->ops;
-
-		fc->fe_sleep = ops->sleep;
-		ops->sleep   = flexcop_sleep;
-
-		fc->dev_type = FC_SKY_REV27;
-
-		/* enable no_base_addr - no repeated start when reading */
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */
-		r108.raw = 0x00000506;
-		fc->write_ibi_reg(fc, tw_sm_c_108, r108);
-		if (i2c_tuner) {
-			if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL)
-				err("ITD1000 could NOT be attached");
-			else
-				info("ITD1000 successfully attached");
-		}
-		goto fe_found;
-	}
-	fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */
-
-	/* try the sky v2.8 (cx24123, isl6421) */
-	fc->fe = dvb_attach(cx24123_attach,
-		&skystar2_rev2_8_cx24123_config, i2c);
-	if (fc->fe != NULL) {
-		i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
-		if (i2c_tuner != NULL) {
-			if (dvb_attach(cx24113_attach, fc->fe,
-					&skystar2_rev2_8_cx24113_config,
-					i2c_tuner) == NULL)
-				err("CX24113 could NOT be attached");
-			else
-				info("CX24113 successfully attached");
-		}
-
-		fc->dev_type = FC_SKY_REV28;
-
-		fc->fc_i2c_adap[2].no_base_addr = 1;
-		if (dvb_attach(isl6421_attach, fc->fe,
-		       &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
-			err("ISL6421 could NOT be attached");
-		else
-			info("ISL6421 successfully attached");
-
-		/* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
-		 * IR-receiver (PIC16F818) - but the card has no input for
-		 * that ??? */
-
-		goto fe_found;
-    }
-
-	/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
-	fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
-	if (fc->fe != NULL) {
-		ops = &fc->fe->ops;
-
-		ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
-
-		ops->set_voltage = flexcop_set_voltage;
-
-		fc->fe_sleep = ops->sleep;
-		ops->sleep = flexcop_sleep;
-
-		fc->dev_type = FC_SKY_REV26;
-		goto fe_found;
-	}
-
-	/* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
-	fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_DVBT;
-		fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
-		goto fe_found;
-	}
-
-	/* try the air atsc 2nd generation (nxt2002) */
-	fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC2;
-		dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
-		goto fe_found;
-	}
-
-	fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC3;
-		dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
-				TUNER_LG_TDVS_H06XF);
-		goto fe_found;
-	}
-
-	/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
-	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_AIR_ATSC1;
-		goto fe_found;
-	}
-
-	/* try the cable dvb (stv0297) */
 	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
-	if (fc->fe != NULL) {
-		fc->dev_type = FC_CABLE;
-		fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
-		goto fe_found;
+	if (fc->fe != NULL)
+		fc->fe->ops.tuner_ops.set_params \
+		= alps_tdee4_stv0297_tuner_set_params;
+	else
+		fc->fc_i2c_adap[0].no_base_addr = 0;
+}
+#endif
+
+static struct {
+	flexcop_device_type_t type;
+	void (*attach)(struct flexcop_device *, struct i2c_adapter *);
+} flexcop_frontends[] = {
+#if defined(CONFIG_DVB_S5H1420_MODULE)
+	{ FC_SKY_REV27, skystar2_rev27_attach },
+#endif
+#if defined(CONFIG_DVB_CX24123_MODULE)
+	{ FC_SKY_REV28, skystar2_rev28_attach },
+#endif
+#if defined(CONFIG_DVB_STV0299_MODULE)
+	{ FC_SKY_REV26, skystar2_rev26_attach },
+#endif
+#if defined(CONFIG_DVB_MT352_MODULE)
+	{ FC_AIR_DVBT, airstar_dvbt_attach },
+#endif
+#if defined(CONFIG_DVB_NXT200X_MODULE)
+	{ FC_AIR_ATSC2, airstar_atsc2_attach },
+#endif
+#if defined(CONFIG_DVB_LGDT330X_MODULE)
+	{ FC_AIR_ATSC3, airstar_atsc3_attach },
+#endif
+#if defined(CONFIG_DVB_BCM3510_MODULE)
+	{ FC_AIR_ATSC1, airstar_atsc1_attach },
+#endif
+#if defined(CONFIG_DVB_STV0297_MODULE)
+	{ FC_CABLE, cablestar2_attach },
+#endif
+#if defined(CONFIG_DVB_MT312_MODULE)
+	{ FC_SKY_REV23, skystar2_rev23_attach },
+#endif
+};
+
+/* try to figure out the frontend */
+int flexcop_frontend_init(struct flexcop_device *fc)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		/* type needs to be set before, because of some workarounds
+		 * done based on the probed card type */
+		fc->dev_type = flexcop_frontends[i].type;
+		flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap);
+		if (fc->fe != NULL)
+			goto fe_found;
 	}
-	fc->fc_i2c_adap[0].no_base_addr = 0;
-
-	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	fc->fe = dvb_attach(mt312_attach,
-		&skystar23_samsung_tbdu18132_config, i2c);
-	if (fc->fe != NULL) {
-		ops = &fc->fe->ops;
-
-		ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
-
-		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
-		ops->diseqc_send_burst      = flexcop_diseqc_send_burst;
-		ops->set_tone               = flexcop_set_tone;
-		ops->set_voltage            = flexcop_set_voltage;
-
-		fc->fe_sleep                = ops->sleep;
-		ops->sleep                  = flexcop_sleep;
-
-		fc->dev_type                = FC_SKY_REV23;
-		goto fe_found;
-	}
-
+	fc->dev_type = FC_UNK;
 	err("no frontend driver found for this B2C2/FlexCop adapter");
 	return -ENODEV;
 
 fe_found:
 	info("found '%s' .", fc->fe->ops.info.name);
 	if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
+		struct dvb_frontend_ops *ops = &fc->fe->ops;
 		err("frontend registration failed!");
-		ops = &fc->fe->ops;
 		if (ops->release != NULL)
 			ops->release(fc->fe);
 		fc->fe = NULL;
@@ -680,6 +741,5 @@
 		dvb_unregister_frontend(fc->fe);
 		dvb_frontend_detach(fc->fe);
 	}
-
 	fc->init_state &= ~FC_STATE_FE_INIT;
 }