blob: dc438bb32c8c7025d6fdf9341faab2c608faf049 [file] [log] [blame]
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/include/ "msm8974pro-ac-pma8084.dtsi"
&spmi_bus {
pm8941_lsid0: qcom,pm8941@2 {
reg = <0x2>;
};
pm8941_lsid1: qcom,pm8941@3 {
reg = <0x3>;
};
};
/include/ "msm-pm8941.dtsi"
&pm8941_lsid0 {
qcom,power-on@800 {
status = "disabled";
};
clkdiv@5b00 {
status = "disabled";
};
clkdiv@5c00 {
status = "disabled";
};
clkdiv@5d00 {
status = "disabled";
};
qcom,pm8941_rtc {
status = "disabled";
};
gpios {
status = "disabled";
};
mpps {
status = "disabled";
};
};
&pm8941_lsid1 {
pm8941_boost: regulator@a000 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
qcom,enable-time = <500>;
status = "okay";
};
pm8941_mvs1: regulator@8300 {
parent-supply = <&pm8941_chg_otg>;
qcom,enable-time = <1000>;
qcom,pull-down-enable = <1>;
interrupts = <0x3 0x83 0x2>;
interrupt-names = "ocp";
qcom,ocp-enable = <1>;
qcom,ocp-max-retries = <10>;
qcom,ocp-retry-delay = <30>;
qcom,soft-start-enable = <1>;
qcom,vs-soft-start-strength = <0>;
qcom,hpm-enable = <1>;
qcom,auto-mode-enable = <0>;
status = "okay";
};
};
&pma8084_mvs1 {
parent-supply = <&pm8941_boost>;
};
&pm8941_chg {
otg-parent-supply = <&pm8941_boost>;
};
&pm8941_chg_boost {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "8941_smbb_boost";
};
&pm8941_chg_batif {
regulator-name = "batfet";
};
&pm8941_chg_otg {
regulator-name = "8941_smbb_otg";
};
&usb3 {
vbus_dwc3-supply = <&pm8941_mvs1>;
qcom,misc-ref = <&pm8941_misc>;
dwc_usb3-adc_tm = <&pm8941_adc_tm>;
interrupt-map-mask = <0x0 0xffffffff>;
interrupt-map = <0x0 0 &intc 0 133 0
0x0 1 &spmi_bus 0x0 0x2 0x9 0x0>;
interrupt-names = "hs_phy_irq", "pmic_id_irq";
qcom,dwc-ssphy-deemphasis-value = <26>;
};
/* Correct PM8941 local slave ID 0 to use global SID 4 for all interrupts. */
&pm8941_lsid0 {
qcom,temp-alarm@2400 {
interrupts = <0x2 0x24 0x0>;
};
qcom,power-on@800 {
interrupts = <0x2 0x8 0x0>,
<0x2 0x8 0x1>,
<0x2 0x8 0x4>,
<0x2 0x8 0x5>;
interrupt-names = "kpdpwr", "resin",
"resin-bark", "kpdpwr-resin-bark";
};
qcom,bsi@1b00 {
interrupts = <0x2 0x1b 0x0>,
<0x2 0x1b 0x1>,
<0x2 0x1b 0x2>,
<0x2 0x12 0x0>;
interrupt-names = "err",
"rx",
"tx",
"batt-present";
};
qcom,bms {
qcom,bms-bms@4000 {
interrupts = <0x2 0x40 0x0>,
<0x2 0x40 0x1>,
<0x2 0x40 0x2>,
<0x2 0x40 0x3>,
<0x2 0x40 0x4>,
<0x2 0x40 0x5>,
<0x2 0x40 0x6>,
<0x2 0x40 0x7>;
interrupt-names = "cc_thr",
"ocv_for_r",
"good_ocv",
"charge_begin",
"ocv_thr",
"sw_cc_thr",
"vsense_avg",
"vsense_for_r";
};
};
qcom,charger {
qcom,chgr@1000 {
interrupts = <0x2 0x10 0x0>,
<0x2 0x10 0x1>,
<0x2 0x10 0x2>,
<0x2 0x10 0x3>,
<0x2 0x10 0x4>,
<0x2 0x10 0x5>,
<0x2 0x10 0x6>,
<0x2 0x10 0x7>;
interrupt-names = "vbat-det-lo",
"vbat-det-hi",
"chgwdog",
"state-change",
"trkl-chg-on",
"fast-chg-on",
"chg-failed",
"chg-done";
};
qcom,buck@1100 {
interrupts = <0x2 0x11 0x0>,
<0x2 0x11 0x1>,
<0x2 0x11 0x2>,
<0x2 0x11 0x3>,
<0x2 0x11 0x4>,
<0x2 0x11 0x5>,
<0x2 0x11 0x6>;
interrupt-names = "vbat-ov",
"vreg-ov",
"overtemp",
"vchg-loop",
"ichg-loop",
"ibat-loop",
"vdd-loop";
};
qcom,bat-if@1200 {
interrupts = <0x2 0x12 0x0>,
<0x2 0x12 0x1>,
<0x2 0x12 0x2>,
<0x2 0x12 0x3>,
<0x2 0x12 0x4>;
interrupt-names = "batt-pres",
"bat-temp-ok",
"bat-fet-on",
"vcp-on",
"psi";
};
qcom,usb-chgpth@1300 {
interrupts = <0x2 0x13 0x0>,
<0x2 0x13 0x1>,
<0x2 0x13 0x2>;
interrupt-names = "coarse-det-usb",
"usbin-valid",
"chg-gone";
};
qcom,dc-chgpth@1400 {
interrupts = <0x2 0x14 0x0>,
<0x2 0x14 0x1>;
interrupt-names = "coarse-det-dc",
"dcin-valid";
};
qcom,boost@1500 {
interrupts = <0x2 0x15 0x0>,
<0x2 0x15 0x1>;
interrupt-names = "boost-pwr-ok",
"limit-error";
};
};
qcom,pm8941_rtc {
qcom,pm8941_rtc_alarm@6100 {
interrupts = <0x2 0x61 0x1>;
};
};
vadc@3100 {
interrupts = <0x2 0x31 0x0>;
interrupt-names = "eoc-int-en-set";
};
iadc@3600 {
interrupts = <0x2 0x36 0x0>;
interrupt-names = "eoc-int-en-set";
};
qcom,vadc@3400 {
interrupts = <0x2 0x34 0x0>,
<0x2 0x34 0x3>,
<0x2 0x34 0x4>;
interrupt-names = "eoc-int-en-set",
"high-thr-en-set",
"low-thr-en-set";
};
};