Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: unbind all interfaces before rebinding them
USB: serial: digi_acceleport: Eliminate a NULL pointer dereference
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected
USB: cdc-acm: fix resource reclaim in error path of acm_probe
USB: ftdi_sio: fix DTR/RTS line modes
USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout
USB: s3c-hsotg: SoftDisconnect minimum 3ms
USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs
USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig
USB: s3c: Enable soft disconnect during initialization
USB: xhci: Print NEC firmware version.
USB: xhci: Wait for host to start running.
USB: xhci: Wait for controller to be ready after reset.
USB: isp1362: fix inw warning on Blackfin systems
USB: mos7840: fix null-pointer dereference
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 672be01..c268783 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -578,15 +578,6 @@
----------------------------
-What: "acpi=ht" boot option
-When: 2.6.35
-Why: Useful in 2003, implementation is a hack.
- Generally invoked by accident today.
- Seen as doing more harm than good.
-Who: Len Brown <len.brown@intel.com>
-
-----------------------------
-
What: iwlwifi 50XX module parameters
When: 2.6.40
Why: The "..50" modules parameters were used to configure 5000 series and
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 30f5d10..a325d57 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -257,10 +257,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- printk("VM: killing process %s\n", current->comm);
- if (user_mode(__frame))
- do_group_exit(SIGKILL);
- goto no_context;
+ if (!user_mode(__frame))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 28ee389..b8ec002 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -188,7 +188,6 @@
if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
goto bad_area;
-survive:
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
@@ -271,15 +270,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- if (is_global_init(tsk)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
- printk("VM: killing process %s\n", tsk->comm);
- if (error_code & ACE_USERMODE)
- do_group_exit(SIGKILL);
- goto no_context;
+ if (!(error_code & ACE_USERMODE))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 53bb17d..81f153f 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -338,11 +338,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- monitor_signal(regs);
- printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
- if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
- do_exit(SIGKILL);
- goto no_context;
+ if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
do_sigbus:
up_read(&mm->mmap_sem);
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index e22c969..6966342 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -81,7 +81,7 @@
current->thread.fault_catcher = NULL;
- kunmap_atomic(page, KM_UML_USERCOPY);
+ kunmap_atomic((void *)addr, KM_UML_USERCOPY);
return n;
}
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index bc07333..e367e30 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -105,7 +105,6 @@
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
-survive:
fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
@@ -146,15 +145,10 @@
*/
out_of_memory:
up_read(&mm->mmap_sem);
- if (is_global_init(current)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
- printk("VM: killing process %s\n", current->comm);
- if (user_mode(regs))
- do_group_exit(SIGKILL);
- bad_page_fault(regs, address, SIGKILL);
+ if (!user_mode(regs))
+ bad_page_fault(regs, address, SIGKILL);
+ else
+ pagefault_out_of_memory();
return;
do_sigbus:
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index e61d4f8..5f2027d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -79,7 +79,7 @@
EC_FLAGS_GPE_STORM, /* GPE storm detected */
EC_FLAGS_HANDLERS_INSTALLED, /* Handlers for GPE and
* OpReg are installed */
- EC_FLAGS_FROZEN, /* Transactions are suspended */
+ EC_FLAGS_BLOCKED, /* Transactions are blocked */
};
/* If we find an EC via the ECDT, we need to keep a ptr to its context */
@@ -293,7 +293,7 @@
if (t->rdata)
memset(t->rdata, 0, t->rlen);
mutex_lock(&ec->lock);
- if (test_bit(EC_FLAGS_FROZEN, &ec->flags)) {
+ if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
status = -EINVAL;
goto unlock;
}
@@ -459,7 +459,7 @@
EXPORT_SYMBOL(ec_transaction);
-void acpi_ec_suspend_transactions(void)
+void acpi_ec_block_transactions(void)
{
struct acpi_ec *ec = first_ec;
@@ -468,11 +468,11 @@
mutex_lock(&ec->lock);
/* Prevent transactions from being carried out */
- set_bit(EC_FLAGS_FROZEN, &ec->flags);
+ set_bit(EC_FLAGS_BLOCKED, &ec->flags);
mutex_unlock(&ec->lock);
}
-void acpi_ec_resume_transactions(void)
+void acpi_ec_unblock_transactions(void)
{
struct acpi_ec *ec = first_ec;
@@ -481,10 +481,20 @@
mutex_lock(&ec->lock);
/* Allow transactions to be carried out again */
- clear_bit(EC_FLAGS_FROZEN, &ec->flags);
+ clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
mutex_unlock(&ec->lock);
}
+void acpi_ec_unblock_transactions_early(void)
+{
+ /*
+ * Allow transactions to happen again (this function is called from
+ * atomic context during wakeup, so we don't need to acquire the mutex).
+ */
+ if (first_ec)
+ clear_bit(EC_FLAGS_BLOCKED, &first_ec->flags);
+}
+
static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
{
int result;
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index e284113..f8f190e 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -49,8 +49,9 @@
int acpi_ec_init(void);
int acpi_ec_ecdt_probe(void);
int acpi_boot_ec_enable(void);
-void acpi_ec_suspend_transactions(void);
-void acpi_ec_resume_transactions(void);
+void acpi_ec_block_transactions(void);
+void acpi_ec_unblock_transactions(void);
+void acpi_ec_unblock_transactions_early(void);
/*--------------------------------------------------------------------------
Suspend/Resume
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2e8c27d..b1b3856 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -80,7 +80,7 @@
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
-static s64 us_to_pm_timer_ticks(s64 t)
+static u64 us_to_pm_timer_ticks(s64 t)
{
return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
}
@@ -731,10 +731,10 @@
seq_puts(seq, "demotion[--] ");
- seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
+ seq_printf(seq, "latency[%03d] usage[%08d] duration[%020Lu]\n",
pr->power.states[i].latency,
pr->power.states[i].usage,
- (unsigned long long)pr->power.states[i].time);
+ us_to_pm_timer_ticks(pr->power.states[i].time));
}
end:
@@ -861,7 +861,6 @@
ktime_t kt1, kt2;
s64 idle_time_ns;
s64 idle_time;
- s64 sleep_ticks = 0;
pr = __get_cpu_var(processors);
@@ -906,8 +905,6 @@
idle_time = idle_time_ns;
do_div(idle_time, NSEC_PER_USEC);
- sleep_ticks = us_to_pm_timer_ticks(idle_time);
-
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(idle_time_ns);
@@ -918,7 +915,7 @@
cx->usage++;
lapic_timer_state_broadcast(pr, cx, 0);
- cx->time += sleep_ticks;
+ cx->time += idle_time;
return idle_time;
}
@@ -940,7 +937,6 @@
ktime_t kt1, kt2;
s64 idle_time_ns;
s64 idle_time;
- s64 sleep_ticks = 0;
pr = __get_cpu_var(processors);
@@ -1022,11 +1018,10 @@
spin_unlock(&c3_lock);
}
kt2 = ktime_get_real();
- idle_time_ns = ktime_to_us(ktime_sub(kt2, kt1));
+ idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
idle_time = idle_time_ns;
do_div(idle_time, NSEC_PER_USEC);
- sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(idle_time_ns);
@@ -1037,7 +1032,7 @@
cx->usage++;
lapic_timer_state_broadcast(pr, cx, 0);
- cx->time += sleep_ticks;
+ cx->time += idle_time;
return idle_time;
}
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 4ab2275..3fb4bde 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -94,11 +94,13 @@
}
/**
- * acpi_pm_disable_gpes - Disable the GPEs.
+ * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
*/
-static int acpi_pm_disable_gpes(void)
+static int acpi_pm_freeze(void)
{
acpi_disable_all_gpes();
+ acpi_os_wait_events_complete(NULL);
+ acpi_ec_block_transactions();
return 0;
}
@@ -126,7 +128,8 @@
int error = __acpi_pm_prepare();
if (!error)
- acpi_disable_all_gpes();
+ acpi_pm_freeze();
+
return error;
}
@@ -256,6 +259,8 @@
* acpi_leave_sleep_state will reenable specific GPEs later
*/
acpi_disable_all_gpes();
+ /* Allow EC transactions to happen. */
+ acpi_ec_unblock_transactions_early();
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
@@ -267,6 +272,12 @@
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
+static void acpi_suspend_finish(void)
+{
+ acpi_ec_unblock_transactions();
+ acpi_pm_finish();
+}
+
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@@ -288,7 +299,7 @@
.begin = acpi_suspend_begin,
.prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .wake = acpi_pm_finish,
+ .wake = acpi_suspend_finish,
.end = acpi_pm_end,
};
@@ -314,9 +325,9 @@
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare_late = acpi_pm_disable_gpes,
+ .prepare_late = acpi_pm_freeze,
.enter = acpi_suspend_enter,
- .wake = acpi_pm_finish,
+ .wake = acpi_suspend_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
@@ -433,6 +444,7 @@
static void acpi_hibernation_finish(void)
{
hibernate_nvs_free();
+ acpi_ec_unblock_transactions();
acpi_pm_finish();
}
@@ -453,19 +465,13 @@
}
/* Restore the NVS memory area */
hibernate_nvs_restore();
+ /* Allow EC transactions to happen. */
+ acpi_ec_unblock_transactions_early();
}
-static int acpi_pm_pre_restore(void)
+static void acpi_pm_thaw(void)
{
- acpi_disable_all_gpes();
- acpi_os_wait_events_complete(NULL);
- acpi_ec_suspend_transactions();
- return 0;
-}
-
-static void acpi_pm_restore_cleanup(void)
-{
- acpi_ec_resume_transactions();
+ acpi_ec_unblock_transactions();
acpi_enable_all_runtime_gpes();
}
@@ -477,8 +483,8 @@
.prepare = acpi_pm_prepare,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_pm_pre_restore,
- .restore_cleanup = acpi_pm_restore_cleanup,
+ .pre_restore = acpi_pm_freeze,
+ .restore_cleanup = acpi_pm_thaw,
};
/**
@@ -510,12 +516,9 @@
static int acpi_hibernation_pre_snapshot_old(void)
{
- int error = acpi_pm_disable_gpes();
-
- if (!error)
- hibernate_nvs_save();
-
- return error;
+ acpi_pm_freeze();
+ hibernate_nvs_save();
+ return 0;
}
/*
@@ -527,11 +530,11 @@
.end = acpi_pm_end,
.pre_snapshot = acpi_hibernation_pre_snapshot_old,
.finish = acpi_hibernation_finish,
- .prepare = acpi_pm_disable_gpes,
+ .prepare = acpi_pm_freeze,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_pm_pre_restore,
- .restore_cleanup = acpi_pm_restore_cleanup,
+ .pre_restore = acpi_pm_freeze,
+ .restore_cleanup = acpi_pm_thaw,
.recover = acpi_pm_finish,
};
#endif /* CONFIG_HIBERNATION */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index f09fc0e..7cfcc62 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1123,6 +1123,7 @@
config RAMOOPS
tristate "Log panic/oops to a RAM buffer"
+ depends on HAS_IOMEM
default n
help
This enables panic and oops messages to be logged to a circular
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c
index db9cd02..2a1e804 100644
--- a/drivers/misc/vmware_balloon.c
+++ b/drivers/misc/vmware_balloon.c
@@ -45,7 +45,7 @@
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.1.0-K");
+MODULE_VERSION("1.2.1.1-k");
MODULE_ALIAS("dmi:*:svnVMware*:*");
MODULE_ALIAS("vmware_vmmemctl");
MODULE_LICENSE("GPL");
@@ -101,6 +101,8 @@
/* Maximum number of page allocations without yielding processor */
#define VMW_BALLOON_YIELD_THRESHOLD 1024
+/* Maximum number of refused pages we accumulate during inflation cycle */
+#define VMW_BALLOON_MAX_REFUSED 16
/*
* Hypervisor communication port definitions.
@@ -183,6 +185,7 @@
/* transient list of non-balloonable pages */
struct list_head refused_pages;
+ unsigned int n_refused_pages;
/* balloon size in pages */
unsigned int size;
@@ -428,14 +431,21 @@
/* inform monitor */
locked = vmballoon_send_lock_page(b, page_to_pfn(page));
if (!locked) {
+ STATS_INC(b->stats.refused_alloc);
+
if (b->reset_required) {
__free_page(page);
return -EIO;
}
- /* place on list of non-balloonable pages, retry allocation */
+ /*
+ * Place page on the list of non-balloonable pages
+ * and retry allocation, unless we already accumulated
+ * too many of them, in which case take a breather.
+ */
list_add(&page->lru, &b->refused_pages);
- STATS_INC(b->stats.refused_alloc);
+ if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED)
+ return -EIO;
}
} while (!locked);
@@ -483,6 +493,8 @@
__free_page(page);
STATS_INC(b->stats.refused_free);
}
+
+ b->n_refused_pages = 0;
}
/*
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 2b28168..d98ddcf 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1157,7 +1157,6 @@
mmc_omap_start_command(host, req->cmd);
if (host->dma_in_use)
omap_start_dma(host->dma_ch);
- BUG_ON(irqs_disabled());
}
static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index e5972b2..70b68d3 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -495,8 +495,6 @@
pr_debug("s3c2410_rtc: RTCCON=%02x\n",
readb(s3c_rtc_base + S3C2410_RTCCON));
- s3c_rtc_setfreq(&pdev->dev, 1);
-
device_init_wakeup(&pdev->dev, 1);
/* register RTC and exit */
@@ -510,14 +508,17 @@
goto err_nortc;
}
+ s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+
if (s3c_rtc_cpu_type == TYPE_S3C64XX)
rtc->max_user_freq = 32768;
else
rtc->max_user_freq = 128;
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
-
platform_set_drvdata(pdev, rtc);
+
+ s3c_rtc_setfreq(&pdev->dev, 1);
+
return 0;
err_nortc:
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index 0051959..ceba593 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -441,8 +441,10 @@
ret = sysfs_create_bin_file(tables_kobj,
&tbl_attr->attr);
- if (ret)
+ if (ret) {
kfree(tbl_attr);
+ tbl_attr = NULL;
+ }
sfi_unmap_table(th);
return tbl_attr;
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 43bf445..b91115f 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -101,7 +101,7 @@
static struct usb_audio_control mute_control = {
.list = LIST_HEAD_INIT(mute_control.list),
.name = "Mute Control",
- .type = UAC_MUTE_CONTROL,
+ .type = UAC_FU_MUTE,
/* Todo: add real Mute control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
@@ -110,7 +110,7 @@
static struct usb_audio_control volume_control = {
.list = LIST_HEAD_INIT(volume_control.list),
.name = "Volume Control",
- .type = UAC_VOLUME_CONTROL,
+ .type = UAC_FU_VOLUME,
/* Todo: add real Volume control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 1e6fec4..3d94a14 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,6 +8,9 @@
config HAVE_FB_ATMEL
bool
+config HAVE_FB_IMX
+ bool
+
source "drivers/char/agp/Kconfig"
source "drivers/gpu/vga/Kconfig"
@@ -400,9 +403,6 @@
If you plan to use the LCD display with your SA-1100 system, say
Y here.
-config HAVE_FB_IMX
- bool
-
config FB_IMX
tristate "Motorola i.MX LCD support"
depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 073c9b4..6b93ef9 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -100,6 +100,16 @@
/* protect against the workqueue changing the page list */
mutex_lock(&fbdefio->lock);
+ /*
+ * We want the page to remain locked from ->page_mkwrite until
+ * the PTE is marked dirty to avoid page_mkclean() being called
+ * before the PTE is updated, which would leave the page ignored
+ * by defio.
+ * Do this by locking the page here and informing the caller
+ * about it with VM_FAULT_LOCKED.
+ */
+ lock_page(page);
+
/* we loop through the pagelist before adding in order
to keep the pagelist sorted */
list_for_each_entry(cur, &fbdefio->pagelist, lru) {
@@ -121,7 +131,7 @@
/* come back after delay to process the deferred IO */
schedule_delayed_work(&info->deferred_work, fbdefio->delay);
- return 0;
+ return VM_FAULT_LOCKED;
}
static const struct vm_operations_struct fb_deferred_io_vm_ops = {
@@ -155,41 +165,25 @@
{
struct fb_info *info = container_of(work, struct fb_info,
deferred_work.work);
+ struct list_head *node, *next;
+ struct page *cur;
struct fb_deferred_io *fbdefio = info->fbdefio;
- struct page *page, *tmp_page;
- struct list_head *node, *tmp_node;
- struct list_head non_dirty;
-
- INIT_LIST_HEAD(&non_dirty);
/* here we mkclean the pages, then do all deferred IO */
mutex_lock(&fbdefio->lock);
- list_for_each_entry_safe(page, tmp_page, &fbdefio->pagelist, lru) {
- lock_page(page);
- /*
- * The workqueue callback can be triggered after a
- * ->page_mkwrite() call but before the PTE has been marked
- * dirty. In this case page_mkclean() won't "rearm" the page.
- *
- * To avoid this, remove those "non-dirty" pages from the
- * pagelist before calling the driver's callback, then add
- * them back to get processed on the next work iteration.
- * At that time, their PTEs will hopefully be dirty for real.
- */
- if (!page_mkclean(page))
- list_move_tail(&page->lru, &non_dirty);
- unlock_page(page);
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ lock_page(cur);
+ page_mkclean(cur);
+ unlock_page(cur);
}
/* driver's callback with pagelist */
fbdefio->deferred_io(info, &fbdefio->pagelist);
- /* clear the list... */
- list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
+ /* clear the list */
+ list_for_each_safe(node, next, &fbdefio->pagelist) {
list_del(node);
}
- /* ... and add back the "non-dirty" pages to the list */
- list_splice_tail(&non_dirty, &fbdefio->pagelist);
mutex_unlock(&fbdefio->lock);
}
@@ -218,7 +212,6 @@
void fb_deferred_io_cleanup(struct fb_info *info)
{
struct fb_deferred_io *fbdefio = info->fbdefio;
- struct list_head *node, *tmp_node;
struct page *page;
int i;
@@ -226,13 +219,6 @@
cancel_delayed_work(&info->deferred_work);
flush_scheduled_work();
- /* the list may have still some non-dirty pages at this point */
- mutex_lock(&fbdefio->lock);
- list_for_each_safe(node, tmp_node, &fbdefio->pagelist) {
- list_del(node);
- }
- mutex_unlock(&fbdefio->lock);
-
/* clear out the mapping that we setup */
for (i = 0 ; i < info->fix.smem_len; i += PAGE_SIZE) {
page = fb_deferred_io_page(info, i);
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 49566c1..b6ab27c 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -56,15 +56,22 @@
#endif
/*
- * User data (stack, data section and bss) needs to be aligned
- * for the same reasons as SLAB memory is, and to the same amount.
- * Avoid duplicating architecture specific code by using the same
- * macro as with SLAB allocation:
+ * User data (data section and bss) needs to be aligned.
+ * We pick 0x20 here because it is the max value elf2flt has always
+ * used in producing FLAT files, and because it seems to be large
+ * enough to make all the gcc alignment related tests happy.
+ */
+#define FLAT_DATA_ALIGN (0x20)
+
+/*
+ * User data (stack) also needs to be aligned.
+ * Here we can be a bit looser than the data sections since this
+ * needs to only meet arch ABI requirements.
*/
#ifdef ARCH_SLAB_MINALIGN
-#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
+#define FLAT_STACK_ALIGN (ARCH_SLAB_MINALIGN)
#else
-#define FLAT_DATA_ALIGN (sizeof(void *))
+#define FLAT_STACK_ALIGN (sizeof(void *))
#endif
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
@@ -129,7 +136,7 @@
sp = (unsigned long *)p;
sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
- sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+ sp = (unsigned long *) ((unsigned long)sp & -FLAT_STACK_ALIGN);
argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
envp = argv + (argc + 1);
@@ -589,7 +596,7 @@
if (IS_ERR_VALUE(result)) {
printk("Unable to read data+bss, errno %d\n", (int)-result);
do_munmap(current->mm, textpos, text_len);
- do_munmap(current->mm, realdatastart, data_len + extra);
+ do_munmap(current->mm, realdatastart, len);
ret = result;
goto err;
}
@@ -876,7 +883,7 @@
stack_len = TOP_OF_ARGS - bprm->p; /* the strings */
stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
- stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
+ stack_len += FLAT_STACK_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
if (IS_ERR_VALUE(res))
diff --git a/fs/compat.c b/fs/compat.c
index f0b391c..6490d21 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -626,7 +626,7 @@
tot_len += len;
if (tot_len < tmp) /* maths overflow on the compat_ssize_t */
goto out;
- if (!access_ok(vrfy_dir(type), buf, len)) {
+ if (!access_ok(vrfy_dir(type), compat_ptr(buf), len)) {
ret = -EFAULT;
goto out;
}
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 1261208..eec3bae 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -12,7 +12,7 @@
extern int register_exec_domain(struct exec_domain *);
extern int unregister_exec_domain(struct exec_domain *);
-extern int __set_personality(unsigned long);
+extern int __set_personality(unsigned int);
#endif /* __KERNEL__ */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a1a86a5..7f614ce 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -289,7 +289,7 @@
cap_user_data_t dataptr);
asmlinkage long sys_capset(cap_user_header_t header,
const cap_user_data_t data);
-asmlinkage long sys_personality(u_long personality);
+asmlinkage long sys_personality(unsigned int personality);
asmlinkage long sys_sigpending(old_sigset_t __user *set);
asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 92f1d99..383b94b 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,16 @@
/* v1.0 and v2.0 of this standard have many things in common. For the rest
* of the definitions, please refer to audio.h */
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x2;
+}
+
/* 4.7.2.1 Clock Source Descriptor */
struct uac_clock_source_descriptor {
@@ -31,6 +41,13 @@
__u8 iClockSource;
} __attribute__((packed));
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT 0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED 0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR 0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG 0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 2)
+
/* 4.7.2.2 Clock Source Descriptor */
struct uac_clock_selector_descriptor {
@@ -39,8 +56,20 @@
__u8 bDescriptorSubtype;
__u8 bClockID;
__u8 bNrInPins;
- __u8 bmControls;
__u8 baCSourceID[];
+ /* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bCSourceID;
+ __u8 bmControls;
+ __u8 iClockMultiplier;
} __attribute__((packed));
/* 4.7.2.4 Input terminal descriptor */
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 5d646c3..c51200c 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -47,6 +47,15 @@
#define UAC_FORMAT_TYPE 0x02
#define UAC_FORMAT_SPECIFIC 0x03
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED 0x00
+#define UAC_PROCESS_UP_DOWNMIX 0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
+#define UAC_PROCESS_STEREO_EXTENDER 0x03
+#define UAC_PROCESS_REVERB 0x04
+#define UAC_PROCESS_CHORUS 0x05
+#define UAC_PROCESS_DYN_RANGE_COMP 0x06
+
/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
#define UAC_EP_GENERAL 0x01
@@ -73,6 +82,60 @@
#define UAC_GET_STAT 0xff
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT 0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE 0x01
+#define UAC_FU_VOLUME 0x02
+#define UAC_FU_BASS 0x03
+#define UAC_FU_MID 0x04
+#define UAC_FU_TREBLE 0x05
+#define UAC_FU_GRAPHIC_EQUALIZER 0x06
+#define UAC_FU_AUTOMATIC_GAIN 0x07
+#define UAC_FU_DELAY 0x08
+#define UAC_FU_BASS_BOOST 0x09
+#define UAC_FU_LOUDNESS 0x0a
+
+#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE 0x01
+#define UAC_UD_MODE_SELECT 0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE 0x01
+#define UAC_DP_MODE_SELECT 0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE 0x01
+#define UAC_3D_SPACE 0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE 0x01
+#define UAC_REVERB_LEVEL 0x02
+#define UAC_REVERB_TIME 0x03
+#define UAC_REVERB_FEEDBACK 0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE 0x01
+#define UAC_CHORUS_LEVEL 0x02
+#define UAC_CHORUS_RATE 0x03
+#define UAC_CHORUS_DEPTH 0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE 0x01
+#define UAC_DCR_RATE 0x02
+#define UAC_DCR_MAXAMPL 0x03
+#define UAC_DCR_THRESHOLD 0x04
+#define UAC_DCR_ATTACK_TIME 0x05
+#define UAC_DCR_RELEASE_TIME 0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE 0x01
+
/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
#define UAC_MS_HEADER 0x01
#define UAC_MIDI_IN_JACK 0x02
@@ -244,7 +307,7 @@
static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
{
__u8 *raw = (__u8 *) desc;
- return raw[9 + desc->bLength - 1];
+ return raw[desc->bLength - 1];
}
/* 4.3.2.5 Feature Unit Descriptor */
@@ -463,31 +526,6 @@
#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
#define UAC_EP_CS_ATTR_FILL_MAX 0x80
-/* A.10.2 Feature Unit Control Selectors */
-
-#define UAC_FU_CONTROL_UNDEFINED 0x00
-#define UAC_MUTE_CONTROL 0x01
-#define UAC_VOLUME_CONTROL 0x02
-#define UAC_BASS_CONTROL 0x03
-#define UAC_MID_CONTROL 0x04
-#define UAC_TREBLE_CONTROL 0x05
-#define UAC_GRAPHIC_EQUALIZER_CONTROL 0x06
-#define UAC_AUTOMATIC_GAIN_CONTROL 0x07
-#define UAC_DELAY_CONTROL 0x08
-#define UAC_BASS_BOOST_CONTROL 0x09
-#define UAC_LOUDNESS_CONTROL 0x0a
-
-#define UAC_FU_MUTE (1 << (UAC_MUTE_CONTROL - 1))
-#define UAC_FU_VOLUME (1 << (UAC_VOLUME_CONTROL - 1))
-#define UAC_FU_BASS (1 << (UAC_BASS_CONTROL - 1))
-#define UAC_FU_MID (1 << (UAC_MID_CONTROL - 1))
-#define UAC_FU_TREBLE (1 << (UAC_TREBLE_CONTROL - 1))
-#define UAC_FU_GRAPHIC_EQ (1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1))
-#define UAC_FU_AUTO_GAIN (1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1))
-#define UAC_FU_DELAY (1 << (UAC_DELAY_CONTROL - 1))
-#define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1))
-#define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1))
-
/* status word format (3.7.1.1) */
#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 422cb19..3ac6f5b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -4598,7 +4598,7 @@
parent_css = parent->subsys[subsys_id];
child_css = child->subsys[subsys_id];
parent_id = parent_css->id;
- depth = parent_id->depth;
+ depth = parent_id->depth + 1;
child_id = get_new_cssid(ss, depth);
if (IS_ERR(child_id))
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index c35452c..dd62f8e 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -27,7 +27,7 @@
static DEFINE_RWLOCK(exec_domains_lock);
-static u_long ident_map[32] = {
+static unsigned long ident_map[32] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
@@ -56,10 +56,10 @@
}
static struct exec_domain *
-lookup_exec_domain(u_long personality)
+lookup_exec_domain(unsigned int personality)
{
- struct exec_domain * ep;
- u_long pers = personality(personality);
+ unsigned int pers = personality(personality);
+ struct exec_domain *ep;
read_lock(&exec_domains_lock);
for (ep = exec_domains; ep; ep = ep->next) {
@@ -70,7 +70,7 @@
#ifdef CONFIG_MODULES
read_unlock(&exec_domains_lock);
- request_module("personality-%ld", pers);
+ request_module("personality-%d", pers);
read_lock(&exec_domains_lock);
for (ep = exec_domains; ep; ep = ep->next) {
@@ -135,7 +135,7 @@
}
int
-__set_personality(u_long personality)
+__set_personality(unsigned int personality)
{
struct exec_domain *ep, *oep;
@@ -188,9 +188,9 @@
module_init(proc_execdomains_init);
#endif
-SYSCALL_DEFINE1(personality, u_long, personality)
+SYSCALL_DEFINE1(personality, unsigned int, personality)
{
- u_long old = current->personality;
+ unsigned int old = current->personality;
if (personality != 0xffffffff) {
set_personality(personality);
@@ -198,7 +198,7 @@
return -EINVAL;
}
- return (long)old;
+ return old;
}
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 825e112..07b4f1b 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -850,7 +850,7 @@
void *cpu = (void *)(long)smp_processor_id();
int err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
- BUG_ON(err == NOTIFY_BAD);
+ BUG_ON(err != NOTIFY_OK);
cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
register_cpu_notifier(&cpu_nfb);
return 0;
diff --git a/kernel/timer.c b/kernel/timer.c
index 2454172..ee305c8 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1717,7 +1717,7 @@
init_timer_stats();
- BUG_ON(err == NOTIFY_BAD);
+ BUG_ON(err != NOTIFY_OK);
register_cpu_notifier(&timers_nb);
open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
}
diff --git a/lib/atomic64_test.c b/lib/atomic64_test.c
index 9087d71..250ed11 100644
--- a/lib/atomic64_test.c
+++ b/lib/atomic64_test.c
@@ -113,7 +113,8 @@
r += one;
BUG_ON(v.counter != r);
-#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(_ASM_GENERIC_ATOMIC64_H)
+#if defined(CONFIG_X86) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \
+ defined(CONFIG_S390) || defined(_ASM_GENERIC_ATOMIC64_H)
INIT(onestwos);
BUG_ON(atomic64_dec_if_positive(&v) != (onestwos - 1));
r -= one;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 915dceb..9c7e57c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1724,13 +1724,13 @@
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
*/
-static int shrink_zones(int priority, struct zonelist *zonelist,
+static bool shrink_zones(int priority, struct zonelist *zonelist,
struct scan_control *sc)
{
enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
struct zoneref *z;
struct zone *zone;
- int progress = 0;
+ bool all_unreclaimable = true;
for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
sc->nodemask) {
@@ -1757,9 +1757,9 @@
}
shrink_zone(priority, zone, sc);
- progress = 1;
+ all_unreclaimable = false;
}
- return progress;
+ return all_unreclaimable;
}
/*
@@ -1782,7 +1782,7 @@
struct scan_control *sc)
{
int priority;
- unsigned long ret = 0;
+ bool all_unreclaimable;
unsigned long total_scanned = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
unsigned long lru_pages = 0;
@@ -1813,7 +1813,7 @@
sc->nr_scanned = 0;
if (!priority)
disable_swap_token();
- ret = shrink_zones(priority, zonelist, sc);
+ all_unreclaimable = shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
* over limit cgroups
@@ -1826,10 +1826,8 @@
}
}
total_scanned += sc->nr_scanned;
- if (sc->nr_reclaimed >= sc->nr_to_reclaim) {
- ret = sc->nr_reclaimed;
+ if (sc->nr_reclaimed >= sc->nr_to_reclaim)
goto out;
- }
/*
* Try to write back as many pages as we just scanned. This
@@ -1849,9 +1847,7 @@
priority < DEF_PRIORITY - 2)
congestion_wait(BLK_RW_ASYNC, HZ/10);
}
- /* top priority shrink_zones still had more to do? don't OOM, then */
- if (ret && scanning_global_lru(sc))
- ret = sc->nr_reclaimed;
+
out:
/*
* Now that we've scanned all the zones at this priority level, note
@@ -1877,7 +1873,14 @@
delayacct_freepages_end();
put_mems_allowed();
- return ret;
+ if (sc->nr_reclaimed)
+ return sc->nr_reclaimed;
+
+ /* top priority shrink_zones still had more to do? don't OOM, then */
+ if (scanning_global_lru(sc) && !all_unreclaimable)
+ return 1;
+
+ return 0;
}
unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index f74c737..1db586a 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2578,6 +2578,9 @@
if (err)
return -err;
+ memset(&prev_ctl, 0, sizeof(prev_ctl));
+ prev_ctl.control_type = -1;
+
for (idx = 0; idx < 2000; idx++) {
err = hpi_mixer_get_control_by_index(
ss, asihpi->h_mixer,
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index dc79564..1df25cf 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1913,11 +1913,11 @@
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
return -1; /* this shouldn't happen! */
- if (wallclk <= azx_dev->period_wallclk &&
+ if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
/* NG - it's below the first next period boundary */
return bdl_pos_adj[chip->dev_index] ? 0 : -1;
- azx_dev->start_wallclk = wallclk;
+ azx_dev->start_wallclk += wallclk;
return 1; /* OK, it's fine */
}
@@ -2288,6 +2288,8 @@
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
@@ -2296,6 +2298,7 @@
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0xd601, "eMachines T5212", POS_FIX_LPIB),
{}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 17d4548..d792cdd 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9476,6 +9476,7 @@
SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
+ SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index eba9b9d..252defe 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -13,9 +13,18 @@
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
- depends on SND_IMX_SOC && EXPERIMENTAL
+ depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
+
+config SND_SOC_PHYCORE_AC97
+ tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+ depends on MACH_PCM043 || MACH_PCA100
+ select SND_MXC_SOC_SSI
+ select SND_SOC_WM9712
+ help
+ Say Y if you want to add support for SoC audio on Phytec phyCORE
+ and phyCARD boards in AC97 mode
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index e7ac7f4..1e362bf 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -11,7 +11,8 @@
endpoint.o \
urb.o \
pcm.o \
- helper.o
+ helper.o \
+ clock.o
snd-usbmidi-lib-objs := midi.o
diff --git a/sound/usb/card.c b/sound/usb/card.c
index da1346b..7a8ac1d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -236,7 +236,6 @@
}
case UAC_VERSION_2: {
- struct uac_clock_source_descriptor *cs;
struct usb_interface_assoc_descriptor *assoc =
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
@@ -245,21 +244,6 @@
return -EINVAL;
}
- /* FIXME: for now, we expect there is at least one clock source
- * descriptor and we always take the first one.
- * We should properly support devices with multiple clock sources,
- * clock selectors and sample rate conversion units. */
-
- cs = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen,
- NULL, UAC2_CLOCK_SOURCE);
-
- if (!cs) {
- snd_printk(KERN_ERR "CLOCK_SOURCE descriptor not found\n");
- return -EINVAL;
- }
-
- chip->clock_id = cs->bClockID;
-
for (i = 0; i < assoc->bInterfaceCount; i++) {
int intf = assoc->bFirstInterface + i;
@@ -481,6 +465,8 @@
goto __error;
}
+ chip->ctrl_intf = alts;
+
if (err > 0) {
/* create normal USB audio interfaces */
if (snd_usb_create_streams(chip, ifnum) < 0 ||
diff --git a/sound/usb/card.h b/sound/usb/card.h
index ed92420..1febf2f 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -25,6 +25,7 @@
unsigned int rate_min, rate_max; /* min/max rates */
unsigned int nr_rates; /* number of rate table entries */
unsigned int *rate_table; /* rate table */
+ unsigned char clock; /* associated clock */
};
struct snd_usb_substream;
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
new file mode 100644
index 0000000..b7aadd6
--- /dev/null
+++ b/sound/usb/clock.c
@@ -0,0 +1,311 @@
+/*
+ * Clock domain and sample rate management functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#include "usbaudio.h"
+#include "card.h"
+#include "midi.h"
+#include "mixer.h"
+#include "proc.h"
+#include "quirks.h"
+#include "endpoint.h"
+#include "helper.h"
+#include "debug.h"
+#include "pcm.h"
+#include "urb.h"
+#include "format.h"
+
+static struct uac_clock_source_descriptor *
+ snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_source_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_SOURCE))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static struct uac_clock_selector_descriptor *
+ snd_usb_find_clock_selector(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_selector_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_SELECTOR))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static struct uac_clock_multiplier_descriptor *
+ snd_usb_find_clock_multiplier(struct usb_host_interface *ctrl_iface,
+ int clock_id)
+{
+ struct uac_clock_multiplier_descriptor *cs = NULL;
+
+ while ((cs = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ cs, UAC2_CLOCK_MULTIPLIER))) {
+ if (cs->bClockID == clock_id)
+ return cs;
+ }
+
+ return NULL;
+}
+
+static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
+{
+ unsigned char buf;
+ int ret;
+
+ ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
+ UAC2_CS_CUR,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
+ UAC2_CX_CLOCK_SELECTOR << 8, selector_id << 8,
+ &buf, sizeof(buf), 1000);
+
+ if (ret < 0)
+ return ret;
+
+ return buf;
+}
+
+static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
+{
+ int err;
+ unsigned char data;
+ struct usb_device *dev = chip->dev;
+
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_CLOCK_VALID << 8, source_id << 8,
+ &data, sizeof(data), 1000);
+
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
+ __func__, source_id);
+ return err;
+ }
+
+ return !!data;
+}
+
+/* Try to find the clock source ID of a given clock entity */
+
+static int __uac_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id, unsigned long *visited)
+{
+ struct uac_clock_source_descriptor *source;
+ struct uac_clock_selector_descriptor *selector;
+ struct uac_clock_multiplier_descriptor *multiplier;
+
+ entity_id &= 0xff;
+
+ if (test_and_set_bit(entity_id, visited)) {
+ snd_printk(KERN_WARNING
+ "%s(): recursive clock topology detected, id %d.\n",
+ __func__, entity_id);
+ return -EINVAL;
+ }
+
+ /* first, see if the ID we're looking for is a clock source already */
+ source = snd_usb_find_clock_source(host_iface, entity_id);
+ if (source)
+ return source->bClockID;
+
+ selector = snd_usb_find_clock_selector(host_iface, entity_id);
+ if (selector) {
+ int ret;
+
+ /* the entity ID we are looking for is a selector.
+ * find out what it currently selects */
+ ret = uac_clock_selector_get_val(chip, selector->bClockID);
+ if (ret < 0)
+ return ret;
+
+ if (ret > selector->bNrInPins || ret < 1) {
+ printk(KERN_ERR
+ "%s(): selector reported illegal value, id %d, ret %d\n",
+ __func__, selector->bClockID, ret);
+
+ return -EINVAL;
+ }
+
+ return __uac_clock_find_source(chip, host_iface,
+ selector->baCSourceID[ret-1],
+ visited);
+ }
+
+ /* FIXME: multipliers only act as pass-thru element for now */
+ multiplier = snd_usb_find_clock_multiplier(host_iface, entity_id);
+ if (multiplier)
+ return __uac_clock_find_source(chip, host_iface,
+ multiplier->bCSourceID, visited);
+
+ return -EINVAL;
+}
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id)
+{
+ DECLARE_BITMAP(visited, 256);
+ memset(visited, 0, sizeof(visited));
+ return __uac_clock_find_source(chip, host_iface, entity_id, visited);
+}
+
+static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned int ep;
+ unsigned char data[3];
+ int err, crate;
+
+ ep = get_endpoint(alts, 0)->bEndpointAddress;
+
+ /* if endpoint doesn't have sampling rate control, bail out */
+ if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
+ snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
+ dev->devnum, iface, fmt->altsetting);
+ return 0;
+ }
+
+ data[0] = rate;
+ data[1] = rate >> 8;
+ data[2] = rate >> 16;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
+ dev->devnum, iface, fmt->altsetting, rate, ep);
+ return err;
+ }
+
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
+ dev->devnum, iface, fmt->altsetting, ep);
+ return 0; /* some devices don't support reading */
+ }
+
+ crate = data[0] | (data[1] << 8) | (data[2] << 16);
+ if (crate != rate) {
+ snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ // runtime->rate = crate;
+ }
+
+ return 0;
+}
+
+static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_device *dev = chip->dev;
+ unsigned char data[4];
+ int err, crate;
+ int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fmt->clock);
+
+ if (clock < 0)
+ return clock;
+
+ if (!uac_clock_source_is_valid(chip, clock)) {
+ snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
+ dev->devnum, iface, fmt->altsetting, clock);
+ return -ENXIO;
+ }
+
+ data[0] = rate;
+ data[1] = rate >> 8;
+ data[2] = rate >> 16;
+ data[3] = rate >> 24;
+ if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
+ dev->devnum, iface, fmt->altsetting, rate);
+ return err;
+ }
+
+ if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ data, sizeof(data), 1000)) < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ return err;
+ }
+
+ crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ if (crate != rate)
+ snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+
+ return 0;
+}
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate)
+{
+ struct usb_interface_descriptor *altsd = get_iface_desc(alts);
+
+ switch (altsd->bInterfaceProtocol) {
+ case UAC_VERSION_1:
+ return set_sample_rate_v1(chip, iface, alts, fmt, rate);
+
+ case UAC_VERSION_2:
+ return set_sample_rate_v2(chip, iface, alts, fmt, rate);
+ }
+
+ return -EINVAL;
+}
+
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
new file mode 100644
index 0000000..beb2536
--- /dev/null
+++ b/sound/usb/clock.h
@@ -0,0 +1,12 @@
+#ifndef __USBAUDIO_CLOCK_H
+#define __USBAUDIO_CLOCK_H
+
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
+ struct usb_host_interface *alts,
+ struct audioformat *fmt, int rate);
+
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct usb_host_interface *host_iface,
+ int entity_id);
+
+#endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 28ee1ce..9593b91 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -190,6 +190,38 @@
return attributes;
}
+static struct uac2_input_terminal_descriptor *
+ snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_input_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_INPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
+static struct uac2_output_terminal_descriptor *
+ snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
+ int terminal_id)
+{
+ struct uac2_output_terminal_descriptor *term = NULL;
+
+ while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
+ ctrl_iface->extralen,
+ term, UAC_OUTPUT_TERMINAL))) {
+ if (term->bTerminalID == terminal_id)
+ return term;
+ }
+
+ return NULL;
+}
+
int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
{
struct usb_device *dev;
@@ -199,7 +231,7 @@
int i, altno, err, stream;
int format = 0, num_channels = 0;
struct audioformat *fp = NULL;
- int num, protocol;
+ int num, protocol, clock = 0;
struct uac_format_type_i_continuous_descriptor *fmt;
dev = chip->dev;
@@ -263,6 +295,8 @@
}
case UAC_VERSION_2: {
+ struct uac2_input_terminal_descriptor *input_term;
+ struct uac2_output_terminal_descriptor *output_term;
struct uac_as_header_descriptor_v2 *as =
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
@@ -281,7 +315,25 @@
num_channels = as->bNrChannels;
format = le32_to_cpu(as->bmFormats);
- break;
+ /* lookup the terminal associated to this interface
+ * to extract the clock */
+ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (input_term) {
+ clock = input_term->bCSourceID;
+ break;
+ }
+
+ output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+ as->bTerminalLink);
+ if (output_term) {
+ clock = output_term->bCSourceID;
+ break;
+ }
+
+ snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
+ dev->devnum, iface_no, altno, as->bTerminalLink);
+ continue;
}
default:
@@ -338,6 +390,7 @@
fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1)
* (fp->maxpacksize & 0x7ff);
fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no);
+ fp->clock = clock;
/* some quirks for attributes here */
diff --git a/sound/usb/format.c b/sound/usb/format.c
index fe29d61..5367cd1 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -29,6 +29,7 @@
#include "quirks.h"
#include "helper.h"
#include "debug.h"
+#include "clock.h"
/*
* parse the audio format type I descriptor
@@ -215,15 +216,17 @@
struct usb_device *dev = chip->dev;
unsigned char tmp[2], *data;
int i, nr_rates, data_size, ret = 0;
+ int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
/* get the number of sample rates first by only fetching 2 bytes */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
tmp, sizeof(tmp), 1000);
if (ret < 0) {
- snd_printk(KERN_ERR "unable to retrieve number of sample rates\n");
+ snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
+ __func__, clock);
goto err;
}
@@ -237,12 +240,13 @@
/* now get the full information */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, data_size, 1000);
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ data, data_size, 1000);
if (ret < 0) {
- snd_printk(KERN_ERR "unable to retrieve sample rate range\n");
+ snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
+ __func__, clock);
ret = -EINVAL;
goto err_free;
}
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 03ce971..a060d00 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -78,39 +78,6 @@
USB_MIXER_U16,
};
-enum {
- USB_PROC_UPDOWN = 1,
- USB_PROC_UPDOWN_SWITCH = 1,
- USB_PROC_UPDOWN_MODE_SEL = 2,
-
- USB_PROC_PROLOGIC = 2,
- USB_PROC_PROLOGIC_SWITCH = 1,
- USB_PROC_PROLOGIC_MODE_SEL = 2,
-
- USB_PROC_3DENH = 3,
- USB_PROC_3DENH_SWITCH = 1,
- USB_PROC_3DENH_SPACE = 2,
-
- USB_PROC_REVERB = 4,
- USB_PROC_REVERB_SWITCH = 1,
- USB_PROC_REVERB_LEVEL = 2,
- USB_PROC_REVERB_TIME = 3,
- USB_PROC_REVERB_DELAY = 4,
-
- USB_PROC_CHORUS = 5,
- USB_PROC_CHORUS_SWITCH = 1,
- USB_PROC_CHORUS_LEVEL = 2,
- USB_PROC_CHORUS_RATE = 3,
- USB_PROC_CHORUS_DEPTH = 4,
-
- USB_PROC_DCR = 6,
- USB_PROC_DCR_SWITCH = 1,
- USB_PROC_DCR_RATIO = 2,
- USB_PROC_DCR_MAX_AMP = 3,
- USB_PROC_DCR_THRESHOLD = 4,
- USB_PROC_DCR_ATTACK = 5,
- USB_PROC_DCR_RELEASE = 6,
-};
/*E-mu 0202(0404) eXtension Unit(XU) control*/
enum {
@@ -198,22 +165,24 @@
/*
* find an audio control unit with the given unit id
- * this doesn't return any clock related units, so they need to be handled elsewhere
*/
static void *find_audio_control_unit(struct mixer_build *state, unsigned char unit)
{
- unsigned char *p;
+ /* we just parse the header */
+ struct uac_feature_unit_descriptor *hdr = NULL;
- p = NULL;
- while ((p = snd_usb_find_desc(state->buffer, state->buflen, p,
- USB_DT_CS_INTERFACE)) != NULL) {
- if (p[0] >= 4 && p[2] >= UAC_INPUT_TERMINAL && p[2] <= UAC2_EXTENSION_UNIT_V2 && p[3] == unit)
- return p;
+ while ((hdr = snd_usb_find_desc(state->buffer, state->buflen, hdr,
+ USB_DT_CS_INTERFACE)) != NULL) {
+ if (hdr->bLength >= 4 &&
+ hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
+ hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
+ hdr->bUnitID == unit)
+ return hdr;
}
+
return NULL;
}
-
/*
* copy a string with the given id
*/
@@ -344,8 +313,8 @@
buf, sizeof(buf), 1000);
if (ret < 0) {
- snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+ snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+ request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
return ret;
}
@@ -462,6 +431,16 @@
int index, int value)
{
int err;
+ unsigned int read_only = (channel == 0) ?
+ cval->master_readonly :
+ cval->ch_readonly & (1 << (channel - 1));
+
+ if (read_only) {
+ snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
+ __func__, channel, cval->control);
+ return 0;
+ }
+
err = snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, (cval->control << 8) | channel,
value);
if (err < 0)
@@ -631,6 +610,7 @@
*/
static int check_input_term(struct mixer_build *state, int id, struct usb_audio_term *term)
{
+ int err;
void *p1;
memset(term, 0, sizeof(*term));
@@ -651,6 +631,11 @@
term->channels = d->bNrChannels;
term->chconfig = le32_to_cpu(d->bmChannelConfig);
term->name = d->iTerminal;
+
+ /* call recursively to get the clock selectors */
+ err = check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
}
return 0;
case UAC_FEATURE_UNIT: {
@@ -667,7 +652,8 @@
term->name = uac_mixer_unit_iMixer(d);
return 0;
}
- case UAC_SELECTOR_UNIT: {
+ case UAC_SELECTOR_UNIT:
+ case UAC2_CLOCK_SELECTOR: {
struct uac_selector_unit_descriptor *d = p1;
/* call recursively to retrieve the channel info */
if (check_input_term(state, d->baSourceID[0], term) < 0)
@@ -690,6 +676,13 @@
term->name = uac_processing_unit_iProcessing(d, state->mixer->protocol);
return 0;
}
+ case UAC2_CLOCK_SOURCE: {
+ struct uac_clock_source_descriptor *d = p1;
+ term->type = d->bDescriptorSubtype << 16; /* virtual type */
+ term->id = id;
+ term->name = d->iClockSource;
+ return 0;
+ }
default:
return -ENODEV;
}
@@ -709,16 +702,20 @@
};
static struct usb_feature_control_info audio_feature_info[] = {
- { "Mute", USB_MIXER_INV_BOOLEAN },
- { "Volume", USB_MIXER_S16 },
+ { "Mute", USB_MIXER_INV_BOOLEAN },
+ { "Volume", USB_MIXER_S16 },
{ "Tone Control - Bass", USB_MIXER_S8 },
{ "Tone Control - Mid", USB_MIXER_S8 },
{ "Tone Control - Treble", USB_MIXER_S8 },
{ "Graphic Equalizer", USB_MIXER_S8 }, /* FIXME: not implemeted yet */
- { "Auto Gain Control", USB_MIXER_BOOLEAN },
- { "Delay Control", USB_MIXER_U16 },
- { "Bass Boost", USB_MIXER_BOOLEAN },
- { "Loudness", USB_MIXER_BOOLEAN },
+ { "Auto Gain Control", USB_MIXER_BOOLEAN },
+ { "Delay Control", USB_MIXER_U16 },
+ { "Bass Boost", USB_MIXER_BOOLEAN },
+ { "Loudness", USB_MIXER_BOOLEAN },
+ /* UAC2 specific */
+ { "Input Gain Control", USB_MIXER_U16 },
+ { "Input Gain Pad Control", USB_MIXER_BOOLEAN },
+ { "Phase Inverter Control", USB_MIXER_BOOLEAN },
};
@@ -958,7 +955,7 @@
static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
unsigned int ctl_mask, int control,
struct usb_audio_term *iterm, int unitid,
- int read_only)
+ int readonly_mask)
{
struct uac_feature_unit_descriptor *desc = raw_desc;
unsigned int len = 0;
@@ -970,7 +967,7 @@
control++; /* change from zero-based to 1-based value */
- if (control == UAC_GRAPHIC_EQUALIZER_CONTROL) {
+ if (control == UAC_FU_GRAPHIC_EQUALIZER) {
/* FIXME: not supported yet */
return;
}
@@ -989,20 +986,25 @@
cval->control = control;
cval->cmask = ctl_mask;
cval->val_type = audio_feature_info[control-1].type;
- if (ctl_mask == 0)
+ if (ctl_mask == 0) {
cval->channels = 1; /* master channel */
- else {
+ cval->master_readonly = readonly_mask;
+ } else {
int i, c = 0;
for (i = 0; i < 16; i++)
if (ctl_mask & (1 << i))
c++;
cval->channels = c;
+ cval->ch_readonly = readonly_mask;
}
/* get min/max values */
get_min_max(cval, 0);
- if (read_only)
+ /* if all channels in the mask are marked read-only, make the control
+ * read-only. set_cur_mix_value() will check the mask again and won't
+ * issue write commands to read-only channels. */
+ if (cval->channels == readonly_mask)
kctl = snd_ctl_new1(&usb_feature_unit_ctl_ro, cval);
else
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
@@ -1021,8 +1023,8 @@
kctl->id.name, sizeof(kctl->id.name));
switch (control) {
- case UAC_MUTE_CONTROL:
- case UAC_VOLUME_CONTROL:
+ case UAC_FU_MUTE:
+ case UAC_FU_VOLUME:
/* determine the control name. the rule is:
* - if a name id is given in descriptor, use it.
* - if the connected input can be determined, then use the name
@@ -1049,9 +1051,9 @@
len = append_ctl_name(kctl, " Playback");
}
}
- append_ctl_name(kctl, control == UAC_MUTE_CONTROL ?
+ append_ctl_name(kctl, control == UAC_FU_MUTE ?
" Switch" : " Volume");
- if (control == UAC_VOLUME_CONTROL) {
+ if (control == UAC_FU_VOLUME) {
kctl->tlv.c = mixer_vol_tlv;
kctl->vd[0].access |=
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
@@ -1150,7 +1152,7 @@
snd_printk(KERN_INFO
"usbmixer: master volume quirk for PCM2702 chip\n");
/* disable non-functional volume control */
- master_bits &= ~UAC_FU_VOLUME;
+ master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
break;
}
if (channels > 0)
@@ -1188,19 +1190,22 @@
for (j = 0; j < channels; j++) {
unsigned int mask = snd_usb_combine_bytes(bmaControls + csize * (j+1), csize);
- if (mask & (1 << (i * 2))) {
+ if (uac2_control_is_readable(mask, i)) {
ch_bits |= (1 << j);
- if (~mask & (1 << ((i * 2) + 1)))
+ if (!uac2_control_is_writeable(mask, i))
ch_read_only |= (1 << j);
}
}
- /* FIXME: the whole unit is read-only if any of the channels is marked read-only */
+ /* NOTE: build_feature_ctl() will mark the control read-only if all channels
+ * are marked read-only in the descriptors. Otherwise, the control will be
+ * reported as writeable, but the driver will not actually issue a write
+ * command for read-only channels */
if (ch_bits & 1) /* the first channel must be set (for ease of programming) */
- build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, !!ch_read_only);
- if (master_bits & (1 << i * 2))
+ build_feature_ctl(state, _ftr, ch_bits, i, &iterm, unitid, ch_read_only);
+ if (uac2_control_is_readable(master_bits, i))
build_feature_ctl(state, _ftr, 0, i, &iterm, unitid,
- ~master_bits & (1 << ((i * 2) + 1)));
+ !uac2_control_is_writeable(master_bits, i));
}
}
@@ -1392,51 +1397,51 @@
};
static struct procunit_value_info updown_proc_info[] = {
- { USB_PROC_UPDOWN_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_UPDOWN_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+ { UAC_UD_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_UD_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
{ 0 }
};
static struct procunit_value_info prologic_proc_info[] = {
- { USB_PROC_PROLOGIC_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_PROLOGIC_MODE_SEL, "Mode Select", USB_MIXER_U8, 1 },
+ { UAC_DP_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_DP_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
{ 0 }
};
static struct procunit_value_info threed_enh_proc_info[] = {
- { USB_PROC_3DENH_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_3DENH_SPACE, "Spaciousness", USB_MIXER_U8 },
+ { UAC_3D_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_3D_SPACE, "Spaciousness", USB_MIXER_U8 },
{ 0 }
};
static struct procunit_value_info reverb_proc_info[] = {
- { USB_PROC_REVERB_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
- { USB_PROC_REVERB_TIME, "Time", USB_MIXER_U16 },
- { USB_PROC_REVERB_DELAY, "Delay", USB_MIXER_U8 },
+ { UAC_REVERB_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
+ { UAC_REVERB_TIME, "Time", USB_MIXER_U16 },
+ { UAC_REVERB_FEEDBACK, "Feedback", USB_MIXER_U8 },
{ 0 }
};
static struct procunit_value_info chorus_proc_info[] = {
- { USB_PROC_CHORUS_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
- { USB_PROC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
- { USB_PROC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
+ { UAC_CHORUS_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
+ { UAC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
+ { UAC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
{ 0 }
};
static struct procunit_value_info dcr_proc_info[] = {
- { USB_PROC_DCR_SWITCH, "Switch", USB_MIXER_BOOLEAN },
- { USB_PROC_DCR_RATIO, "Ratio", USB_MIXER_U16 },
- { USB_PROC_DCR_MAX_AMP, "Max Amp", USB_MIXER_S16 },
- { USB_PROC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
- { USB_PROC_DCR_ATTACK, "Attack Time", USB_MIXER_U16 },
- { USB_PROC_DCR_RELEASE, "Release Time", USB_MIXER_U16 },
+ { UAC_DCR_ENABLE, "Switch", USB_MIXER_BOOLEAN },
+ { UAC_DCR_RATE, "Ratio", USB_MIXER_U16 },
+ { UAC_DCR_MAXAMPL, "Max Amp", USB_MIXER_S16 },
+ { UAC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
+ { UAC_DCR_ATTACK_TIME, "Attack Time", USB_MIXER_U16 },
+ { UAC_DCR_RELEASE_TIME, "Release Time", USB_MIXER_U16 },
{ 0 }
};
static struct procunit_info procunits[] = {
- { USB_PROC_UPDOWN, "Up Down", updown_proc_info },
- { USB_PROC_PROLOGIC, "Dolby Prologic", prologic_proc_info },
- { USB_PROC_3DENH, "3D Stereo Extender", threed_enh_proc_info },
- { USB_PROC_REVERB, "Reverb", reverb_proc_info },
- { USB_PROC_CHORUS, "Chorus", chorus_proc_info },
- { USB_PROC_DCR, "DCR", dcr_proc_info },
+ { UAC_PROCESS_UP_DOWNMIX, "Up Down", updown_proc_info },
+ { UAC_PROCESS_DOLBY_PROLOGIC, "Dolby Prologic", prologic_proc_info },
+ { UAC_PROCESS_STEREO_EXTENDER, "3D Stereo Extender", threed_enh_proc_info },
+ { UAC_PROCESS_REVERB, "Reverb", reverb_proc_info },
+ { UAC_PROCESS_CHORUS, "Chorus", chorus_proc_info },
+ { UAC_PROCESS_DYN_RANGE_COMP, "DCR", dcr_proc_info },
{ 0 },
};
/*
@@ -1524,7 +1529,7 @@
cval->channels = 1;
/* get min/max values */
- if (type == USB_PROC_UPDOWN && cval->control == USB_PROC_UPDOWN_MODE_SEL) {
+ if (type == UAC_PROCESS_UP_DOWNMIX && cval->control == UAC_UD_MODE_SELECT) {
__u8 *control_spec = uac_processing_unit_specific(desc, state->mixer->protocol);
/* FIXME: hard-coded */
cval->min = 1;
@@ -1619,7 +1624,7 @@
struct usb_mixer_elem_info *cval = kcontrol->private_data;
int val, err;
- err = get_cur_ctl_value(cval, 0, &val);
+ err = get_cur_ctl_value(cval, cval->control << 8, &val);
if (err < 0) {
if (cval->mixer->ignore_ctl_error) {
ucontrol->value.enumerated.item[0] = 0;
@@ -1638,7 +1643,7 @@
struct usb_mixer_elem_info *cval = kcontrol->private_data;
int val, oval, err;
- err = get_cur_ctl_value(cval, 0, &oval);
+ err = get_cur_ctl_value(cval, cval->control << 8, &oval);
if (err < 0) {
if (cval->mixer->ignore_ctl_error)
return 0;
@@ -1647,7 +1652,7 @@
val = ucontrol->value.enumerated.item[0];
val = get_abs_value(cval, val);
if (val != oval) {
- set_cur_ctl_value(cval, 0, val);
+ set_cur_ctl_value(cval, cval->control << 8, val);
return 1;
}
return 0;
@@ -1729,6 +1734,11 @@
cval->res = 1;
cval->initialized = 1;
+ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+ cval->control = UAC2_CX_CLOCK_SELECTOR;
+ else
+ cval->control = 0;
+
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
if (! namelist) {
snd_printk(KERN_ERR "cannot malloc\n");
@@ -1778,7 +1788,9 @@
if (! len)
strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
- if ((state->oterm.type & 0xff00) == 0x0100)
+ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
+ append_ctl_name(kctl, " Clock Source");
+ else if ((state->oterm.type & 0xff00) == 0x0100)
append_ctl_name(kctl, " Capture Source");
else
append_ctl_name(kctl, " Playback Source");
@@ -1812,10 +1824,12 @@
switch (p1[2]) {
case UAC_INPUT_TERMINAL:
+ case UAC2_CLOCK_SOURCE:
return 0; /* NOP */
case UAC_MIXER_UNIT:
return parse_audio_mixer_unit(state, unitid, p1);
case UAC_SELECTOR_UNIT:
+ case UAC2_CLOCK_SELECTOR:
return parse_audio_selector_unit(state, unitid, p1);
case UAC_FEATURE_UNIT:
return parse_audio_feature_unit(state, unitid, p1);
@@ -1912,6 +1926,11 @@
err = parse_audio_unit(&state, desc->bSourceID);
if (err < 0)
return err;
+
+ /* for UAC2, use the same approach to also add the clock selectors */
+ err = parse_audio_unit(&state, desc->bCSourceID);
+ if (err < 0)
+ return err;
}
}
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index 1301238..a7cf100 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -34,6 +34,8 @@
unsigned int id;
unsigned int control; /* CS or ICN (high byte) */
unsigned int cmask; /* channel mask bitmap: 0 = master */
+ unsigned int ch_readonly;
+ unsigned int master_readonly;
int channels;
int val_type;
int min, max, res;
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index d93fc89..f1324c4 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -85,8 +85,8 @@
/* 16: MU (w/o controls) */
{ 17, NULL, 1 }, /* DISABLED: PU-switch (any effect?) */
{ 17, "Channel Routing", 2 }, /* PU: mode select */
- { 18, "Tone Control - Bass", UAC_BASS_CONTROL }, /* FU */
- { 18, "Tone Control - Treble", UAC_TREBLE_CONTROL }, /* FU */
+ { 18, "Tone Control - Bass", UAC_FU_BASS }, /* FU */
+ { 18, "Tone Control - Treble", UAC_FU_TREBLE }, /* FU */
{ 18, "Master Playback" }, /* FU; others */
/* 19: OT speaker */
/* 20: OT headphone */
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 056587d..4568298 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -31,6 +31,7 @@
#include "urb.h"
#include "helper.h"
#include "pcm.h"
+#include "clock.h"
/*
* return the current pcm pointer. just based on the hwptr_done value.
@@ -181,103 +182,6 @@
return -EINVAL;
}
-static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_device *dev = chip->dev;
- unsigned int ep;
- unsigned char data[3];
- int err, crate;
-
- ep = get_endpoint(alts, 0)->bEndpointAddress;
- /* if endpoint doesn't have sampling rate control, bail out */
- if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
- snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
- dev->devnum, iface, fmt->altsetting);
- return 0;
- }
-
- data[0] = rate;
- data[1] = rate >> 8;
- data[2] = rate >> 16;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
- dev->devnum, iface, fmt->altsetting, rate, ep);
- return err;
- }
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_IN,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
- dev->devnum, iface, fmt->altsetting, ep);
- return 0; /* some devices don't support reading */
- }
- crate = data[0] | (data[1] << 8) | (data[2] << 16);
- if (crate != rate) {
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
- // runtime->rate = crate;
- }
-
- return 0;
-}
-
-static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_device *dev = chip->dev;
- unsigned char data[4];
- int err, crate;
-
- data[0] = rate;
- data[1] = rate >> 8;
- data[2] = rate >> 16;
- data[3] = rate >> 24;
- if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
- dev->devnum, iface, fmt->altsetting, rate);
- return err;
- }
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, chip->clock_id << 8,
- data, sizeof(data), 1000)) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
- dev->devnum, iface, fmt->altsetting);
- return err;
- }
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
-
- return 0;
-}
-
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
- struct audioformat *fmt, int rate)
-{
- struct usb_interface_descriptor *altsd = get_iface_desc(alts);
-
- switch (altsd->bInterfaceProtocol) {
- case UAC_VERSION_1:
- return set_sample_rate_v1(chip, iface, alts, fmt, rate);
-
- case UAC_VERSION_2:
- return set_sample_rate_v2(chip, iface, alts, fmt, rate);
- }
-
- return -EINVAL;
-}
-
/*
* find a matching format and set up the interface
*/
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 06ebf24..24d3319 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -40,9 +40,6 @@
int num_interfaces;
int num_suspended_intf;
- /* for audio class v2 */
- int clock_id;
-
struct list_head pcm_list; /* list of pcm streams */
int pcm_devs;
@@ -53,6 +50,8 @@
int setup; /* from the 'device_setup' module param */
int nrpacks; /* from the 'nrpacks' module param */
int async_unlink; /* from the 'async_unlink' module param */
+
+ struct usb_host_interface *ctrl_intf; /* the audio control interface */
};
/*