Char: mxser, remove special baudrate processing
Let the special baudrate processing on the tty layer. Also remove
set/get_special_rate ioctls introduced in commit
f64c84a1668930d1ca2b7dbaa92146c2139cb508, since it is no longer needed.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/mxser_new.c b/drivers/char/mxser_new.c
index f74734b..0b25457 100644
--- a/drivers/char/mxser_new.c
+++ b/drivers/char/mxser_new.c
@@ -173,18 +173,6 @@
};
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
-static int mxvar_baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
-};
-static unsigned int mxvar_baud_table1[] = {
- 0, B50, B75, B110, B134, B150, B200, B300, B600, B1200, B1800, B2400,
- B4800, B9600, B19200, B38400, B57600, B115200, B230400, B460800, B921600
-};
-#define BAUD_TABLE_NO ARRAY_SIZE(mxvar_baud_table)
-
-#define B_SPEC B2000000
-
static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
static int ttymajor = MXSERMAJOR;
static int calloutmajor = MXSERCUMAJOR;
@@ -243,10 +231,8 @@
int rx_trigger; /* Rx fifo trigger level */
int rx_low_water;
int baud_base; /* max. speed */
- long realbaud;
int type; /* UART type */
int flags; /* defined in tty.h */
- int speed;
int x_char; /* xon/xoff character */
int IER; /* Interrupt Enable Register */
@@ -451,7 +437,6 @@
static int mxser_set_baud(struct mxser_port *info, long newspd)
{
- unsigned int i;
int quot = 0, baud;
unsigned char cval;
@@ -464,27 +449,17 @@
if (newspd > info->max_baud)
return -1;
- info->realbaud = newspd;
- for (i = 0; i < BAUD_TABLE_NO; i++)
- if (newspd == mxvar_baud_table[i])
- break;
- if (i == BAUD_TABLE_NO) {
- quot = info->baud_base / info->speed;
- if (info->speed <= 0 || info->speed > info->max_baud)
- quot = 0;
+ if (newspd == 134) {
+ quot = 2 * info->baud_base / 269;
+ tty_encode_baud_rate(info->tty, 134, 134);
+ } else if (newspd) {
+ quot = info->baud_base / newspd;
+ if (quot == 0)
+ quot = 1;
+ baud = info->baud_base/quot;
+ tty_encode_baud_rate(info->tty, baud, baud);
} else {
- if (newspd == 134) {
- quot = (2 * info->baud_base / 269);
- tty_encode_baud_rate(info->tty, 134, 134);
- } else if (newspd) {
- quot = info->baud_base / newspd;
- if (quot == 0)
- quot = 1;
- baud = info->baud_base/quot;
- tty_encode_baud_rate(info->tty, baud, baud);
- } else {
- quot = 0;
- }
+ quot = 0;
}
info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
@@ -507,17 +482,19 @@
outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
- if (i == BAUD_TABLE_NO) {
- quot = info->baud_base % info->speed;
+#ifdef BOTHER
+ if (C_BAUD(info->tty) == BOTHER) {
+ quot = info->baud_base % newspd;
quot *= 8;
- if ((quot % info->speed) > (info->speed / 2)) {
- quot /= info->speed;
+ if (quot % newspd > newspd / 2) {
+ quot /= newspd;
quot++;
- } else {
- quot /= info->speed;
- }
+ } else
+ quot /= newspd;
+
SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, quot);
} else
+#endif
SET_MOXA_MUST_ENUM_VALUE(info->ioaddr, 0);
return 0;
@@ -533,7 +510,6 @@
unsigned cflag, cval, fcr;
int ret = 0;
unsigned char status;
- long baud;
if (!info->tty || !info->tty->termios)
return ret;
@@ -541,13 +517,8 @@
if (!(info->ioaddr))
return ret;
- if (mxser_set_baud_method[info->tty->index] == 0) {
- if ((cflag & CBAUD) == B_SPEC)
- baud = info->speed;
- else
- baud = tty_get_baud_rate(info->tty);
- mxser_set_baud(info, baud);
- }
+ if (mxser_set_baud_method[info->tty->index] == 0)
+ mxser_set_baud(info, tty_get_baud_rate(info->tty));
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -1587,7 +1558,8 @@
port->mon_data.up_txcnt;
mon_data_ext.modem_status[i] =
port->mon_data.modem_status;
- mon_data_ext.baudrate[i] = port->realbaud;
+ mon_data_ext.baudrate[i] =
+ tty_get_baud_rate(port->tty);
if (!port->tty || !port->tty->termios) {
cflag = port->normal_termios.c_cflag;
@@ -1645,7 +1617,6 @@
struct serial_icounter_struct __user *p_cuser;
unsigned long templ;
unsigned long flags;
- unsigned int i;
void __user *argp = (void __user *)arg;
int retval;
@@ -1684,36 +1655,6 @@
return 0;
}
- if (cmd == MOXA_SET_SPECIAL_BAUD_RATE) {
- int speed;
-
- if (get_user(speed, (int __user *)argp))
- return -EFAULT;
- if (speed <= 0 || speed > info->max_baud)
- return -EFAULT;
- if (!info->tty || !info->tty->termios || !info->ioaddr)
- return 0;
- info->tty->termios->c_cflag &= ~(CBAUD | CBAUDEX);
- for (i = 0; i < BAUD_TABLE_NO; i++)
- if (speed == mxvar_baud_table[i])
- break;
- if (i == BAUD_TABLE_NO) {
- info->tty->termios->c_cflag |= B_SPEC;
- } else if (speed != 0)
- info->tty->termios->c_cflag |= mxvar_baud_table1[i];
-
- info->speed = speed;
- spin_lock_irqsave(&info->slock, flags);
- mxser_change_speed(info, NULL);
- spin_unlock_irqrestore(&info->slock, flags);
-
- return 0;
- } else if (cmd == MOXA_GET_SPECIAL_BAUD_RATE) {
- if (copy_to_user(argp, &info->speed, sizeof(int)))
- return -EFAULT;
- return 0;
- }
-
if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
test_bit(TTY_IO_ERROR, &tty->flags))
return -EIO;
@@ -1807,20 +1748,6 @@
info->mon_data.rxcnt = 0;
info->mon_data.txcnt = 0;
return 0;
- case MOXA_ASPP_SETBAUD:{
- long baud;
- if (get_user(baud, (long __user *)argp))
- return -EFAULT;
- spin_lock_irqsave(&info->slock, flags);
- mxser_set_baud(info, baud);
- spin_unlock_irqrestore(&info->slock, flags);
- return 0;
- }
- case MOXA_ASPP_GETBAUD:
- if (copy_to_user(argp, &info->realbaud, sizeof(long)))
- return -EFAULT;
-
- return 0;
case MOXA_ASPP_OQUEUE:{
int len, lsr;
@@ -2434,7 +2361,6 @@
info->normal_termios = mxvar_sdriver->init_termios;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->delta_msr_wait);
- info->speed = 9600;
memset(&info->mon_data, 0, sizeof(struct mxser_mon));
info->err_shadow = 0;
spin_lock_init(&info->slock);
diff --git a/drivers/char/mxser_new.h b/drivers/char/mxser_new.h
index d42f776..7f7b4a7 100644
--- a/drivers/char/mxser_new.h
+++ b/drivers/char/mxser_new.h
@@ -29,14 +29,10 @@
#define MOXA_SDS_RSTICOUNTER (MOXA + 69)
#define MOXA_ASPP_OQUEUE (MOXA + 70)
-#define MOXA_ASPP_SETBAUD (MOXA + 71)
-#define MOXA_ASPP_GETBAUD (MOXA + 72)
#define MOXA_ASPP_MON (MOXA + 73)
#define MOXA_ASPP_LSTATUS (MOXA + 74)
#define MOXA_ASPP_MON_EXT (MOXA + 75)
#define MOXA_SET_BAUD_METHOD (MOXA + 76)
-#define MOXA_SET_SPECIAL_BAUD_RATE (MOXA + 77)
-#define MOXA_GET_SPECIAL_BAUD_RATE (MOXA + 78)
/* --------------------------------------------------- */