| #include <linux/capability.h> |
| #include <linux/blkdev.h> |
| #include <linux/export.h> |
| #include <linux/gfp.h> |
| #include <linux/blkpg.h> |
| #include <linux/hdreg.h> |
| #include <linux/backing-dev.h> |
| #include <linux/fs.h> |
| #include <linux/blktrace_api.h> |
| #include <asm/uaccess.h> |
| |
| static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user *arg) |
| { |
| struct block_device *bdevp; |
| struct gendisk *disk; |
| struct hd_struct *part; |
| struct blkpg_ioctl_arg a; |
| struct blkpg_partition p; |
| struct disk_part_iter piter; |
| long long start, length; |
| int partno; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (copy_from_user(&a, arg, sizeof(struct blkpg_ioctl_arg))) |
| return -EFAULT; |
| if (copy_from_user(&p, a.data, sizeof(struct blkpg_partition))) |
| return -EFAULT; |
| disk = bdev->bd_disk; |
| if (bdev != bdev->bd_contains) |
| return -EINVAL; |
| partno = p.pno; |
| if (partno <= 0) |
| return -EINVAL; |
| switch (a.op) { |
| case BLKPG_ADD_PARTITION: |
| start = p.start >> 9; |
| length = p.length >> 9; |
| /* check for fit in a hd_struct */ |
| if (sizeof(sector_t) == sizeof(long) && |
| sizeof(long long) > sizeof(long)) { |
| long pstart = start, plength = length; |
| if (pstart != start || plength != length |
| || pstart < 0 || plength < 0) |
| return -EINVAL; |
| } |
| |
| mutex_lock(&bdev->bd_mutex); |
| |
| /* overlap? */ |
| disk_part_iter_init(&piter, disk, |
| DISK_PITER_INCL_EMPTY); |
| while ((part = disk_part_iter_next(&piter))) { |
| if (!(start + length <= part->start_sect || |
| start >= part->start_sect + part->nr_sects)) { |
| disk_part_iter_exit(&piter); |
| mutex_unlock(&bdev->bd_mutex); |
| return -EBUSY; |
| } |
| } |
| disk_part_iter_exit(&piter); |
| |
| /* all seems OK */ |
| part = add_partition(disk, partno, start, length, |
| ADDPART_FLAG_NONE, NULL); |
| mutex_unlock(&bdev->bd_mutex); |
| return IS_ERR(part) ? PTR_ERR(part) : 0; |
| case BLKPG_DEL_PARTITION: |
| part = disk_get_part(disk, partno); |
| if (!part) |
| return -ENXIO; |
| |
| bdevp = bdget(part_devt(part)); |
| disk_put_part(part); |
| if (!bdevp) |
| return -ENOMEM; |
| |
| mutex_lock(&bdevp->bd_mutex); |
| if (bdevp->bd_openers) { |
| mutex_unlock(&bdevp->bd_mutex); |
| bdput(bdevp); |
| return -EBUSY; |
| } |
| /* all seems OK */ |
| fsync_bdev(bdevp); |
| invalidate_bdev(bdevp); |
| |
| mutex_lock_nested(&bdev->bd_mutex, 1); |
| delete_partition(disk, partno); |
| mutex_unlock(&bdev->bd_mutex); |
| mutex_unlock(&bdevp->bd_mutex); |
| bdput(bdevp); |
| |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int blkdev_reread_part(struct block_device *bdev) |
| { |
| struct gendisk *disk = bdev->bd_disk; |
| int res; |
| |
| if (!disk_part_scan_enabled(disk) || bdev != bdev->bd_contains) |
| return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (!mutex_trylock(&bdev->bd_mutex)) |
| return -EBUSY; |
| res = rescan_partitions(disk, bdev); |
| mutex_unlock(&bdev->bd_mutex); |
| return res; |
| } |
| |
| static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, |
| uint64_t len, int secure) |
| { |
| unsigned long flags = 0; |
| |
| if (start & 511) |
| return -EINVAL; |
| if (len & 511) |
| return -EINVAL; |
| start >>= 9; |
| len >>= 9; |
| |
| if (start + len > (i_size_read(bdev->bd_inode) >> 9)) |
| return -EINVAL; |
| if (secure) |
| flags |= BLKDEV_DISCARD_SECURE; |
| return blkdev_issue_discard(bdev, start, len, GFP_KERNEL, flags); |
| } |
| |
| static int put_ushort(unsigned long arg, unsigned short val) |
| { |
| return put_user(val, (unsigned short __user *)arg); |
| } |
| |
| static int put_int(unsigned long arg, int val) |
| { |
| return put_user(val, (int __user *)arg); |
| } |
| |
| static int put_uint(unsigned long arg, unsigned int val) |
| { |
| return put_user(val, (unsigned int __user *)arg); |
| } |
| |
| static int put_long(unsigned long arg, long val) |
| { |
| return put_user(val, (long __user *)arg); |
| } |
| |
| static int put_ulong(unsigned long arg, unsigned long val) |
| { |
| return put_user(val, (unsigned long __user *)arg); |
| } |
| |
| static int put_u64(unsigned long arg, u64 val) |
| { |
| return put_user(val, (u64 __user *)arg); |
| } |
| |
| int __blkdev_driver_ioctl(struct block_device *bdev, fmode_t mode, |
| unsigned cmd, unsigned long arg) |
| { |
| struct gendisk *disk = bdev->bd_disk; |
| |
| if (disk->fops->ioctl) |
| return disk->fops->ioctl(bdev, mode, cmd, arg); |
| |
| return -ENOTTY; |
| } |
| /* |
| * For the record: _GPL here is only because somebody decided to slap it |
| * on the previous export. Sheer idiocy, since it wasn't copyrightable |
| * at all and could be open-coded without any exports by anybody who cares. |
| */ |
| EXPORT_SYMBOL_GPL(__blkdev_driver_ioctl); |
| |
| /* |
| * Is it an unrecognized ioctl? The correct returns are either |
| * ENOTTY (final) or ENOIOCTLCMD ("I don't know this one, try a |
| * fallback"). ENOIOCTLCMD gets turned into ENOTTY by the ioctl |
| * code before returning. |
| * |
| * Confused drivers sometimes return EINVAL, which is wrong. It |
| * means "I understood the ioctl command, but the parameters to |
| * it were wrong". |
| * |
| * We should aim to just fix the broken drivers, the EINVAL case |
| * should go away. |
| */ |
| static inline int is_unrecognized_ioctl(int ret) |
| { |
| return ret == -EINVAL || |
| ret == -ENOTTY || |
| ret == -ENOIOCTLCMD; |
| } |
| |
| /* |
| * always keep this in sync with compat_blkdev_ioctl() |
| */ |
| int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, |
| unsigned long arg) |
| { |
| struct gendisk *disk = bdev->bd_disk; |
| struct backing_dev_info *bdi; |
| loff_t size; |
| int ret, n; |
| |
| switch(cmd) { |
| case BLKFLSBUF: |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg); |
| if (!is_unrecognized_ioctl(ret)) |
| return ret; |
| |
| fsync_bdev(bdev); |
| invalidate_bdev(bdev); |
| return 0; |
| |
| case BLKROSET: |
| ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg); |
| if (!is_unrecognized_ioctl(ret)) |
| return ret; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (get_user(n, (int __user *)(arg))) |
| return -EFAULT; |
| set_device_ro(bdev, n); |
| return 0; |
| |
| case BLKDISCARD: |
| case BLKSECDISCARD: { |
| uint64_t range[2]; |
| |
| if (!(mode & FMODE_WRITE)) |
| return -EBADF; |
| |
| if (copy_from_user(range, (void __user *)arg, sizeof(range))) |
| return -EFAULT; |
| |
| return blk_ioctl_discard(bdev, range[0], range[1], |
| cmd == BLKSECDISCARD); |
| } |
| |
| case HDIO_GETGEO: { |
| struct hd_geometry geo; |
| |
| if (!arg) |
| return -EINVAL; |
| if (!disk->fops->getgeo) |
| return -ENOTTY; |
| |
| /* |
| * We need to set the startsect first, the driver may |
| * want to override it. |
| */ |
| memset(&geo, 0, sizeof(geo)); |
| geo.start = get_start_sect(bdev); |
| ret = disk->fops->getgeo(bdev, &geo); |
| if (ret) |
| return ret; |
| if (copy_to_user((struct hd_geometry __user *)arg, &geo, |
| sizeof(geo))) |
| return -EFAULT; |
| return 0; |
| } |
| case BLKRAGET: |
| case BLKFRAGET: |
| if (!arg) |
| return -EINVAL; |
| bdi = blk_get_backing_dev_info(bdev); |
| if (bdi == NULL) |
| return -ENOTTY; |
| return put_long(arg, (bdi->ra_pages * PAGE_CACHE_SIZE) / 512); |
| case BLKROGET: |
| return put_int(arg, bdev_read_only(bdev) != 0); |
| case BLKBSZGET: /* get block device soft block size (cf. BLKSSZGET) */ |
| return put_int(arg, block_size(bdev)); |
| case BLKSSZGET: /* get block device logical block size */ |
| return put_int(arg, bdev_logical_block_size(bdev)); |
| case BLKPBSZGET: /* get block device physical block size */ |
| return put_uint(arg, bdev_physical_block_size(bdev)); |
| case BLKIOMIN: |
| return put_uint(arg, bdev_io_min(bdev)); |
| case BLKIOOPT: |
| return put_uint(arg, bdev_io_opt(bdev)); |
| case BLKALIGNOFF: |
| return put_int(arg, bdev_alignment_offset(bdev)); |
| case BLKDISCARDZEROES: |
| return put_uint(arg, bdev_discard_zeroes_data(bdev)); |
| case BLKSECTGET: |
| return put_ushort(arg, queue_max_sectors(bdev_get_queue(bdev))); |
| case BLKRASET: |
| case BLKFRASET: |
| if(!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| bdi = blk_get_backing_dev_info(bdev); |
| if (bdi == NULL) |
| return -ENOTTY; |
| bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE; |
| return 0; |
| case BLKBSZSET: |
| /* set the logical block size */ |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (!arg) |
| return -EINVAL; |
| if (get_user(n, (int __user *) arg)) |
| return -EFAULT; |
| if (!(mode & FMODE_EXCL)) { |
| bdgrab(bdev); |
| if (blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0) |
| return -EBUSY; |
| } |
| ret = set_blocksize(bdev, n); |
| if (!(mode & FMODE_EXCL)) |
| blkdev_put(bdev, mode | FMODE_EXCL); |
| return ret; |
| case BLKPG: |
| ret = blkpg_ioctl(bdev, (struct blkpg_ioctl_arg __user *) arg); |
| break; |
| case BLKRRPART: |
| ret = blkdev_reread_part(bdev); |
| break; |
| case BLKGETSIZE: |
| size = i_size_read(bdev->bd_inode); |
| if ((size >> 9) > ~0UL) |
| return -EFBIG; |
| return put_ulong(arg, size >> 9); |
| case BLKGETSIZE64: |
| return put_u64(arg, i_size_read(bdev->bd_inode)); |
| case BLKTRACESTART: |
| case BLKTRACESTOP: |
| case BLKTRACESETUP: |
| case BLKTRACETEARDOWN: |
| ret = blk_trace_ioctl(bdev, cmd, (char __user *) arg); |
| break; |
| default: |
| ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(blkdev_ioctl); |