Merge branch 'fixes' of git://github.com/hzhuang1/linux into fixes
* 'fixes' of git://github.com/hzhuang1/linux:
ARM: PXA2xx: MFP: fix potential direction bug
ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT
arm/sa1100: fix sa1100-rtc memory resource
ARM: pxa: fix gpio wakeup setting
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0d..45bc4bb 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -10,7 +10,7 @@
intc: interrupt-controller@02080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <3>;
reg = < 0x02080000 0x1000 >,
< 0x02081000 0x1000 >;
};
@@ -19,6 +19,6 @@
compatible = "qcom,msm-hsuart", "qcom,msm-uart";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
- interrupts = <195>;
+ interrupts = <0 195 0x0>;
};
};
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 962e711..fb3496a 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -17,6 +17,7 @@
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/memblock.h>
@@ -49,10 +50,22 @@
msm_map_msm8x60_io();
}
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+ { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+ {}
+};
+#endif
+
static void __init msm8x60_init_irq(void)
{
- gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
- (void *)MSM_QGIC_CPU_BASE);
+ if (!of_have_populated_dt())
+ gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+ (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+ else
+ of_irq_init(msm_dt_gic_match);
+#endif
/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@
{}
};
-static struct of_device_id msm_dt_gic_match[] __initdata = {
- { .compatible = "qcom,msm-8660-qgic", },
- {}
-};
-
static void __init msm8x60_dt_init(void)
{
- irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
- GIC_SPI_START);
-
if (of_machine_is_compatible("qcom,msm8660-surf")) {
printk(KERN_INFO "Init surf UART registers\n");
msm8x60_init_uart12dm();
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1621ad0..3333974 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1667,8 +1667,10 @@
for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
- vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
- vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+ vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+ mask[0], mask[0]);
+ vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+ mask[1], mask[1]);
}
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index a38f802..cb04bd6 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -146,9 +146,6 @@
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
.always_on = 1,
.boot_on = 1,
},
@@ -160,9 +157,6 @@
.min_uV = 2500000,
.max_uV = 2500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
.always_on = 1,
.boot_on = 1,
},
@@ -230,8 +224,7 @@
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask =
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
+ REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.boot_on = 1,
},
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ee78a26..ec09c1e 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,101 +12,101 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
-#define IRQ_U300_INTCON0_START 0
-#define IRQ_U300_INTCON1_START 32
+#define IRQ_U300_INTCON0_START 1
+#define IRQ_U300_INTCON1_START 33
/* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT 0
-#define IRQ_U300_IRQ1_EXT 1
-#define IRQ_U300_DMA 2
-#define IRQ_U300_VIDEO_ENC_0 3
-#define IRQ_U300_VIDEO_ENC_1 4
-#define IRQ_U300_AAIF_RX 5
-#define IRQ_U300_AAIF_TX 6
-#define IRQ_U300_AAIF_VGPIO 7
-#define IRQ_U300_AAIF_WAKEUP 8
-#define IRQ_U300_PCM_I2S0_FRAME 9
-#define IRQ_U300_PCM_I2S0_FIFO 10
-#define IRQ_U300_PCM_I2S1_FRAME 11
-#define IRQ_U300_PCM_I2S1_FIFO 12
-#define IRQ_U300_XGAM_GAMCON 13
-#define IRQ_U300_XGAM_CDI 14
-#define IRQ_U300_XGAM_CDICON 15
+#define IRQ_U300_IRQ0_EXT 1
+#define IRQ_U300_IRQ1_EXT 2
+#define IRQ_U300_DMA 3
+#define IRQ_U300_VIDEO_ENC_0 4
+#define IRQ_U300_VIDEO_ENC_1 5
+#define IRQ_U300_AAIF_RX 6
+#define IRQ_U300_AAIF_TX 7
+#define IRQ_U300_AAIF_VGPIO 8
+#define IRQ_U300_AAIF_WAKEUP 9
+#define IRQ_U300_PCM_I2S0_FRAME 10
+#define IRQ_U300_PCM_I2S0_FIFO 11
+#define IRQ_U300_PCM_I2S1_FRAME 12
+#define IRQ_U300_PCM_I2S1_FIFO 13
+#define IRQ_U300_XGAM_GAMCON 14
+#define IRQ_U300_XGAM_CDI 15
+#define IRQ_U300_XGAM_CDICON 16
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
/* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC 16
+#define IRQ_U300_XGAM_MMIACC 17
#endif
-#define IRQ_U300_XGAM_PDI 17
-#define IRQ_U300_XGAM_PDICON 18
-#define IRQ_U300_XGAM_GAMEACC 19
-#define IRQ_U300_XGAM_MCIDCT 20
-#define IRQ_U300_APEX 21
-#define IRQ_U300_UART0 22
-#define IRQ_U300_SPI 23
-#define IRQ_U300_TIMER_APP_OS 24
-#define IRQ_U300_TIMER_APP_DD 25
-#define IRQ_U300_TIMER_APP_GP1 26
-#define IRQ_U300_TIMER_APP_GP2 27
-#define IRQ_U300_TIMER_OS 28
-#define IRQ_U300_TIMER_MS 29
-#define IRQ_U300_KEYPAD_KEYBF 30
-#define IRQ_U300_KEYPAD_KEYBR 31
+#define IRQ_U300_XGAM_PDI 18
+#define IRQ_U300_XGAM_PDICON 19
+#define IRQ_U300_XGAM_GAMEACC 20
+#define IRQ_U300_XGAM_MCIDCT 21
+#define IRQ_U300_APEX 22
+#define IRQ_U300_UART0 23
+#define IRQ_U300_SPI 24
+#define IRQ_U300_TIMER_APP_OS 25
+#define IRQ_U300_TIMER_APP_DD 26
+#define IRQ_U300_TIMER_APP_GP1 27
+#define IRQ_U300_TIMER_APP_GP2 28
+#define IRQ_U300_TIMER_OS 29
+#define IRQ_U300_TIMER_MS 30
+#define IRQ_U300_KEYPAD_KEYBF 31
+#define IRQ_U300_KEYPAD_KEYBR 32
/* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0 32
-#define IRQ_U300_GPIO_PORT1 33
-#define IRQ_U300_GPIO_PORT2 34
+#define IRQ_U300_GPIO_PORT0 33
+#define IRQ_U300_GPIO_PORT1 34
+#define IRQ_U300_GPIO_PORT2 35
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
defined(CONFIG_MACH_U300_BS335)
/* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG 35
-#define IRQ_U300_EVHIST 36
-#define IRQ_U300_MSPRO 37
-#define IRQ_U300_MMCSD_MCIINTR0 38
-#define IRQ_U300_MMCSD_MCIINTR1 39
-#define IRQ_U300_I2C0 40
-#define IRQ_U300_I2C1 41
-#define IRQ_U300_RTC 42
-#define IRQ_U300_NFIF 43
-#define IRQ_U300_NFIF2 44
+#define IRQ_U300_WDOG 36
+#define IRQ_U300_EVHIST 37
+#define IRQ_U300_MSPRO 38
+#define IRQ_U300_MMCSD_MCIINTR0 39
+#define IRQ_U300_MMCSD_MCIINTR1 40
+#define IRQ_U300_I2C0 41
+#define IRQ_U300_I2C1 42
+#define IRQ_U300_RTC 43
+#define IRQ_U300_NFIF 44
+#define IRQ_U300_NFIF2 45
#endif
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END 45
+#define U300_VIC_IRQS_END 46
#endif
/* The DB3350-specific interrupt lines */
#ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0 45
-#define IRQ_U300_ISP_F1 46
-#define IRQ_U300_ISP_F2 47
-#define IRQ_U300_ISP_F3 48
-#define IRQ_U300_ISP_F4 49
-#define IRQ_U300_GPIO_PORT3 50
-#define IRQ_U300_SYSCON_PLL_LOCK 51
-#define IRQ_U300_UART1 52
-#define IRQ_U300_GPIO_PORT4 53
-#define IRQ_U300_GPIO_PORT5 54
-#define IRQ_U300_GPIO_PORT6 55
-#define U300_VIC_IRQS_END 56
+#define IRQ_U300_ISP_F0 46
+#define IRQ_U300_ISP_F1 47
+#define IRQ_U300_ISP_F2 48
+#define IRQ_U300_ISP_F3 49
+#define IRQ_U300_ISP_F4 50
+#define IRQ_U300_GPIO_PORT3 51
+#define IRQ_U300_SYSCON_PLL_LOCK 52
+#define IRQ_U300_UART1 53
+#define IRQ_U300_GPIO_PORT4 54
+#define IRQ_U300_GPIO_PORT5 55
+#define IRQ_U300_GPIO_PORT6 56
+#define U300_VIC_IRQS_END 57
#endif
/* The DB3210-specific interrupt lines */
#ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3 35
-#define IRQ_U300_GPIO_PORT4 36
-#define IRQ_U300_WDOG 37
-#define IRQ_U300_EVHIST 38
-#define IRQ_U300_MSPRO 39
-#define IRQ_U300_MMCSD_MCIINTR0 40
-#define IRQ_U300_MMCSD_MCIINTR1 41
-#define IRQ_U300_I2C0 42
-#define IRQ_U300_I2C1 43
-#define IRQ_U300_RTC 44
-#define IRQ_U300_NFIF 45
-#define IRQ_U300_NFIF2 46
-#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_VIC_IRQS_END 48
+#define IRQ_U300_GPIO_PORT3 36
+#define IRQ_U300_GPIO_PORT4 37
+#define IRQ_U300_WDOG 38
+#define IRQ_U300_EVHIST 39
+#define IRQ_U300_MSPRO 40
+#define IRQ_U300_MMCSD_MCIINTR0 41
+#define IRQ_U300_MMCSD_MCIINTR1 42
+#define IRQ_U300_I2C0 43
+#define IRQ_U300_I2C1 44
+#define IRQ_U300_RTC 45
+#define IRQ_U300_NFIF 46
+#define IRQ_U300_NFIF2 47
+#define IRQ_U300_SYSCON_PLL_LOCK 48
+#define U300_VIC_IRQS_END 49
#endif
/* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
-#define NR_IRQS (IRQ_U300_GPIO_END)
+#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
#endif