ath9k: Add open loop power control support for AR9287.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 26d8752..20f74b5 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -729,26 +729,42 @@
static void ath9k_olc_temp_compensation(struct ath_hw *ah)
{
u32 rddata, i;
- int delta, currPDADC, regval;
+ int delta, currPDADC, regval, slope;
rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
-
currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
- if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
- delta = (currPDADC - ah->initPDADC + 4) / 8;
- else
- delta = (currPDADC - ah->initPDADC + 5) / 10;
- if (delta != ah->PDADCdelta) {
- ah->PDADCdelta = delta;
- for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
- regval = ah->originalGain[i] - delta;
- if (regval < 0)
- regval = 0;
+ if (OLC_FOR_AR9287_10_LATER) {
+ if (ah->initPDADC == 0 || currPDADC == 0) {
+ return;
+ } else {
+ slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
+ if (slope == 0)
+ delta = 0;
+ else
+ delta = ((currPDADC - ah->initPDADC)*4) / slope;
+ REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
+ AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+ REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
+ AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+ }
+ } else {
+ if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
+ delta = (currPDADC - ah->initPDADC + 4) / 8;
+ else
+ delta = (currPDADC - ah->initPDADC + 5) / 10;
- REG_RMW_FIELD(ah, AR_PHY_TX_GAIN_TBL1 + i * 4,
- AR_PHY_TX_GAIN, regval);
+ if (delta != ah->PDADCdelta) {
+ ah->PDADCdelta = delta;
+ for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
+ regval = ah->originalGain[i] - delta;
+ if (regval < 0)
+ regval = 0;
+
+ REG_RMW_FIELD(ah, AR_PHY_TX_GAIN_TBL1 + i * 4,
+ AR_PHY_TX_GAIN, regval);
+ }
}
}
}