USB: ohci whitespace/comment fixups
This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace
(space before tab, at end of line) as well as the obsolete inline changelog.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b466581..f15c84e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -221,7 +221,7 @@
*/
.start = ohci_at91_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 24e23c5..e70b243 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -269,7 +269,7 @@
*/
.start = ohci_au1xxx_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -336,7 +336,7 @@
static struct platform_driver ohci_hcd_au1xxx_driver = {
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 0f47a57..273d5dd 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -16,7 +16,7 @@
case PIPE_CONTROL: temp = "ctrl"; break; \
case PIPE_BULK: temp = "bulk"; break; \
case PIPE_INTERRUPT: temp = "intr"; break; \
- default: temp = "isoc"; break; \
+ default: temp = "isoc"; break; \
}; temp;})
#define pipestring(pipe) edstring(usb_pipetype(pipe))
@@ -205,13 +205,13 @@
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
@@ -563,7 +563,7 @@
(info & ED_SKIP) ? " K" : "",
(ed->hwHeadP &
cpu_to_hc32(ohci, ED_H)) ?
- " H" : "");
+ " H" : "");
size -= temp;
next += temp;
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 1bf5e7a..43ae696 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -204,7 +204,7 @@
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_hcd_ep93xx_drv_suspend,
.resume = ohci_hcd_ep93xx_drv_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b28a9b6..c31f00b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -3,77 +3,21 @@
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
- *
+ *
+ *
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
* interfaces (though some non-x86 Intel chips use it). It supports
* smarter hardware than UHCI. A download link for the spec available
* through the http://www.usb.org website.
*
- * History:
- *
- * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
- * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
- * 2003/02/24 show registers in sysfs (Kevin Brosius)
- *
- * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
- * bandwidth accounting; if debugging, show schedules in driverfs
- * 2002/07/19 fixes to management of ED and schedule state.
- * 2002/06/09 SA-1111 support (Christopher Hoover)
- * 2002/06/01 remember frame when HC won't see EDs any more; use that info
- * to fix urb unlink races caused by interrupt latency assumptions;
- * minor ED field and function naming updates
- * 2002/01/18 package as a patch for 2.5.3; this should match the
- * 2.4.17 kernel modulo some bugs being fixed.
- *
- * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
- * from post-2.4.5 patches.
- * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
- * 2001/09/07 match PCI PM changes, errnos from Linus' tree
- * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
- * pbook pci quirks gone (please fix pbook pci sw!) (db)
- *
- * 2001/04/08 Identify version on module load (gb)
- * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
- pci_map_single (db)
- * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
- * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
- *
- * 2000/09/26 fixed races in removing the private portion of the urb
- * 2000/09/07 disable bulk and control lists when unlinking the last
- * endpoint descriptor in order to avoid unrecoverable errors on
- * the Lucent chips. (rwc@sgi)
- * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
- * urb unlink probs, indentation fixes
- * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
- * device unplugs.
- * 2000/06/28 use PCI hotplug framework, for better power management
- * and for Cardbus support (David Brownell)
- * 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling
- * when the controller loses power; handle UE; cleanup; ...
- *
- * v5.2 1999/12/07 URB 3rd preview,
- * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
- * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
- * i386: HUB, Keyboard, Mouse, Printer
- *
- * v4.3 1999/10/27 multiple HCs, bulk_request
- * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
- * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
- * v4.0 1999/08/18
- * v3.0 1999/06/25
- * v2.1 1999/05/09 code clean up
- * v2.0 1999/05/04
- * v1.0 1999/04/27 initial release
- *
* This file is licenced under the GPL.
*/
-
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
@@ -89,7 +33,7 @@
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
@@ -183,11 +127,11 @@
int i, size = 0;
unsigned long flags;
int retval = 0;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "SUB", usb_pipein (pipe));
#endif
-
+
/* every endpoint has a ed, locate and maybe (re)initialize it */
if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
return -ENOMEM;
@@ -232,7 +176,7 @@
memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
INIT_LIST_HEAD (&urb_priv->pending);
urb_priv->length = size;
- urb_priv->ed = ed;
+ urb_priv->ed = ed;
/* allocate the TDs (deferring hash chain updates) */
for (i = 0; i < size; i++) {
@@ -242,7 +186,7 @@
urb_free_priv (ohci, urb_priv);
return -ENOMEM;
}
- }
+ }
spin_lock_irqsave (&ohci->lock, flags);
@@ -313,13 +257,13 @@
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
-
+
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "UNLINK", 1);
-#endif
+#endif
spin_lock_irqsave (&ohci->lock, flags);
- if (HC_IS_RUNNING(hcd->state)) {
+ if (HC_IS_RUNNING(hcd->state)) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
@@ -512,11 +456,11 @@
/* Start an OHCI controller, set the BUS operational
* resets USB and controller
- * enable interrupts
+ * enable interrupts
*/
static int ohci_run (struct ohci_hcd *ohci)
{
- u32 mask, temp;
+ u32 mask, temp;
int first = ohci->fminterval == 0;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
@@ -534,7 +478,7 @@
/* also: power/overcurrent flags in roothub.a */
}
- /* Reset USB nearly "by the book". RemoteWakeupConnected was
+ /* Reset USB nearly "by the book". RemoteWakeupConnected was
* saved if boot firmware (BIOS/SMM/...) told us it's connected,
* or if bus glue did the same (e.g. for PCI add-in cards with
* PCI PM support).
@@ -765,9 +709,9 @@
dl_done_list (ohci);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable);
}
-
+
/* could track INTR_SO to reduce available PCI/... bandwidth */
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
@@ -778,12 +722,12 @@
finish_unlinks (ohci, ohci_frame_no(ohci));
if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
&& HC_IS_RUNNING(hcd->state))
- ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
+ ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state)) {
ohci_writel (ohci, ints, ®s->intrstatus);
- ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
+ ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
}
@@ -794,7 +738,7 @@
/*-------------------------------------------------------------------------*/
static void ohci_stop (struct usb_hcd *hcd)
-{
+{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
@@ -812,8 +756,8 @@
remove_debug_files (ohci);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
- dma_free_coherent (hcd->self.controller,
- sizeof *ohci->hcca,
+ dma_free_coherent (hcd->self.controller,
+ sizeof *ohci->hcca,
ohci->hcca, ohci->hcca_dma);
ohci->hcca = NULL;
ohci->hcca_dma = 0;
@@ -836,7 +780,7 @@
* recycle any "live" eds/tds (and urbs) right away.
* later, khubd disconnect processing will recycle the other state,
* (either as disconnect/reconnect, or maybe someday as a reset).
- */
+ */
spin_lock_irq(&ohci->lock);
disable (ohci);
usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
@@ -875,11 +819,11 @@
/* empty the interrupt branches */
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
-
+
/* no EDs to remove */
ohci->ed_rm_list = NULL;
- /* empty control and bulk lists */
+ /* empty control and bulk lists */
ohci->ed_controltail = NULL;
ohci->ed_bulktail = NULL;
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 2441642..f9748b6 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -1,9 +1,9 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under GPL
*/
@@ -23,13 +23,13 @@
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
@@ -484,7 +484,7 @@
temp = 0;
if (rh & RH_A_NPS) /* no power switching? */
temp |= 0x0002;
- if (rh & RH_A_PSM) /* per-port power switching? */
+ if (rh & RH_A_PSM) /* per-port power switching? */
temp |= 0x0001;
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
temp |= 0x0010;
@@ -573,7 +573,7 @@
if (!(temp & RH_PS_PRS))
break;
udelay (500);
- }
+ }
if (!(temp & RH_PS_CCS))
break;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index e121d97..e9807cf 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -38,7 +38,7 @@
CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
udelay(1000);
USBH_CMDSTATUS = OHCI_HCR;
-
+
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
}
@@ -89,7 +89,7 @@
retval = -EBUSY;
goto err1;
}
-
+
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
@@ -174,7 +174,7 @@
*/
.start = ohci_lh7a404_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -242,7 +242,7 @@
static struct platform_driver ohci_hcd_lh7a404_driver = {
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_lh7a404_drv_suspend, */
/*.resume = ohci_hcd_lh7a404_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index d976614..2f20d3d 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -1,24 +1,24 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
/*-------------------------------------------------------------------------*/
/*
- * There's basically three types of memory:
+ * OHCI deals with three types of memory:
* - data used only by the HCD ... kmalloc is fine
* - async and periodic schedules, shared by HC and HCD ... these
* need to use dma_pool or dma_alloc_coherent
* - driver buffers, read/written by HC ... the hcd glue or the
* device driver provides us with dma addresses
*
- * There's also PCI "register" data, which is memory mapped.
- * No memory seen by this driver is pagable.
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
*/
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9c02177..27be1f9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -447,7 +447,7 @@
.reset = ohci_omap_init,
.start = ohci_omap_start,
.stop = ohci_omap_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -533,7 +533,7 @@
static struct platform_driver ohci_hcd_omap_driver = {
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_omap_suspend,
.resume = ohci_omap_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8744185..596e0b4 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -3,17 +3,17 @@
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
+ *
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
-
+
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
@@ -83,7 +83,7 @@
pci_dev_put(b);
}
- /* Check for Compaq's ZFMicro chipset, which needs short
+ /* Check for Compaq's ZFMicro chipset, which needs short
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
@@ -238,8 +238,8 @@
.shutdown = usb_hcd_pci_shutdown,
};
-
-static int __init ohci_hcd_pci_init (void)
+
+static int __init ohci_hcd_pci_init (void)
{
printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
if (usb_disabled())
@@ -253,8 +253,8 @@
/*-------------------------------------------------------------------------*/
-static void __exit ohci_hcd_pci_cleanup (void)
-{
+static void __exit ohci_hcd_pci_cleanup (void)
+{
pci_unregister_driver (&ohci_pci_driver);
}
module_exit (ohci_hcd_pci_cleanup);
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 7f26f9b..3a8cbfb 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -4,7 +4,7 @@
* driver for Philips PNX4008 USB Host
*
* Authors: Dmitry Chigirev <source@mvista.com>
- * Vitaly Wool <vitalywool@gmail.com>
+ * Vitaly Wool <vitalywool@gmail.com>
*
* register initialization is based on code examples provided by Philips
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
@@ -29,7 +29,7 @@
#include <asm/arch/irqs.h>
#include <asm/arch/gpio.h>
-#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
/* USB_CTRL bit defines */
#define USB_SLAVE_HCLK_EN (1 << 24)
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index d9d1ae2..e1a7eb8 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -5,7 +5,7 @@
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
* (C) Copyright 2003-2005 MontaVista Software Inc.
- *
+ *
* Bus Glue for PPC On-Chip OHCI driver
* Tested on Freescale MPC5200 and IBM STB04xxx
*
@@ -85,7 +85,7 @@
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
- usb_put_hcd(hcd);
+ usb_put_hcd(hcd);
return retval;
}
@@ -148,7 +148,7 @@
*/
.start = ohci_ppc_soc_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -197,7 +197,7 @@
static struct platform_driver ohci_hcd_ppc_soc_driver = {
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e176b04..3bbea84 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -47,7 +47,7 @@
switch ( mode ) {
case PMM_NPS_MODE:
UHCRHDA |= RH_A_NPS;
- break;
+ break;
case PMM_GLOBAL_MODE:
UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
break;
@@ -60,7 +60,7 @@
break;
default:
printk( KERN_ERR
- "Invalid mode %d, set to non-power switch mode.\n",
+ "Invalid mode %d, set to non-power switch mode.\n",
mode );
UHCRHDA |= RH_A_NPS;
@@ -270,7 +270,7 @@
*/
.start = ohci_pxa27x_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -359,9 +359,9 @@
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
- .suspend = ohci_hcd_pxa27x_drv_suspend,
+ .suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
#endif
.driver = {
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index fe1fe2f..830a3fe 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -1,9 +1,9 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
@@ -89,7 +89,7 @@
/*-------------------------------------------------------------------------*
* ED handling functions
- *-------------------------------------------------------------------------*/
+ *-------------------------------------------------------------------------*/
/* search for the right schedule branch to use for a periodic ed.
* does some load balancing; returns the branch, or negative errno.
@@ -107,7 +107,6 @@
*/
for (i = 0; i < interval ; i++) {
if (branch < 0 || ohci->load [branch] > ohci->load [i]) {
-#if 1 /* CONFIG_USB_BANDWIDTH */
int j;
/* usb 1.1 says 90% of one frame */
@@ -117,8 +116,7 @@
}
if (j < NUM_INTS)
continue;
-#endif
- branch = i;
+ branch = i;
}
}
return branch;
@@ -171,7 +169,7 @@
/* link an ed into one of the HC chains */
static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
int branch;
if (ohci_to_hcd(ohci)->state == HC_STATE_QUIESCING)
@@ -248,7 +246,7 @@
}
ed->branch = branch;
periodic_link (ohci, ed);
- }
+ }
/* the HC may not see the schedule updates yet, but if it does
* then they'll be properly ordered.
@@ -277,7 +275,7 @@
*prev = ed->ed_next;
}
ohci->load [i] -= ed->load;
- }
+ }
ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval;
ohci_vdbg (ohci, "unlink %sed %p branch %d [%dus.], interval %d\n",
@@ -285,7 +283,7 @@
ed, ed->branch, ed->load, ed->interval);
}
-/* unlink an ed from one of the HC chains.
+/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed
@@ -307,7 +305,7 @@
* When finish_unlinks() runs later, after SOF interrupt, it will often
* complete one or more URB unlinks before making that state change.
*/
-static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
+static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
@@ -397,7 +395,7 @@
unsigned int pipe,
int interval
) {
- struct ed *ed;
+ struct ed *ed;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
@@ -413,9 +411,9 @@
goto done;
}
- /* dummy td; end of td list for ed */
+ /* dummy td; end of td list for ed */
td = td_alloc (ohci, GFP_ATOMIC);
- if (!td) {
+ if (!td) {
/* out of memory */
ed_free (ohci, ed);
ed = NULL;
@@ -462,7 +460,7 @@
done:
spin_unlock_irqrestore (&ohci->lock, flags);
- return ed;
+ return ed;
}
/*-------------------------------------------------------------------------*/
@@ -474,7 +472,7 @@
* and that ed->state is ED_OPER
*/
static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
-{
+{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE);
ed_deschedule (ohci, ed);
@@ -541,7 +539,7 @@
td->ed = urb_priv->ed;
td->next_dl_td = NULL;
td->index = index;
- td->urb = urb;
+ td->urb = urb;
td->data_dma = data;
if (!len)
data = 0;
@@ -553,8 +551,8 @@
(data & 0x0FFF) | 0xE000);
td->ed->last_iso = info & 0xffff;
} else {
- td->hwCBP = cpu_to_hc32 (ohci, data);
- }
+ td->hwCBP = cpu_to_hc32 (ohci, data);
+ }
if (data)
td->hwBE = cpu_to_hc32 (ohci, data + len - 1);
else
@@ -597,7 +595,7 @@
* use the device toggle bits for resetting, and rely on the fact
* that resetting toggle is meaningless if the endpoint is active.
*/
- if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
+ if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe),
is_out, 1);
urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
@@ -721,16 +719,16 @@
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
- if (tdINFO & TD_ISO) {
- u16 tdPSW = ohci_hwPSW (ohci, td, 0);
+ if (tdINFO & TD_ISO) {
+ u16 tdPSW = ohci_hwPSW (ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
* only the first of 0..MAXPSW psws is used.
*/
- cc = (tdPSW >> 12) & 0xF;
- if (tdINFO & TD_CC) /* hc didn't touch? */
+ cc = (tdPSW >> 12) & 0xF;
+ if (tdINFO & TD_CC) /* hc didn't touch? */
return;
if (usb_pipeout (urb->pipe))
@@ -758,7 +756,7 @@
int type = usb_pipetype (urb->pipe);
u32 tdBE = hc32_to_cpup (ohci, &td->hwBE);
- cc = TD_CC_GET (tdINFO);
+ cc = TD_CC_GET (tdINFO);
/* update packet status if needed (short is normally ok) */
if (cc == TD_DATAUNDERRUN
@@ -787,7 +785,7 @@
urb, td, 1 + td->index, cc,
urb->actual_length,
urb->transfer_buffer_length);
- }
+ }
}
/*-------------------------------------------------------------------------*/
@@ -795,7 +793,7 @@
static inline struct td *
ed_halted (struct ohci_hcd *ohci, struct td *td, int cc, struct td *rev)
{
- struct urb *urb = td->urb;
+ struct urb *urb = td->urb;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
@@ -805,7 +803,7 @@
*/
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
- ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
+ ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
/* put any later tds from this urb onto the donelist, after 'td',
* order won't matter here: no errors, and nothing was transferred.
@@ -833,7 +831,7 @@
info &= ~cpu_to_hc32 (ohci, TD_CC);
next->hwINFO = info;
- next->next_dl_td = rev;
+ next->next_dl_td = rev;
rev = next;
ed->hwHeadP = next->hwNextTD | toggle;
@@ -881,8 +879,8 @@
/* get TD from hc's singly linked list, and
* prepend to ours. ed->td_list changes later.
*/
- while (td_dma) {
- int cc;
+ while (td_dma) {
+ int cc;
td = dma_to_td (ohci, td_dma);
if (!td) {
@@ -901,10 +899,10 @@
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
td_rev = ed_halted (ohci, td, cc, td_rev);
- td->next_dl_td = td_rev;
+ td->next_dl_td = td_rev;
td_rev = td;
td_dma = hc32_to_cpup (ohci, &td->hwNextTD);
- }
+ }
return td_rev;
}
@@ -1013,9 +1011,9 @@
if (modified)
goto rescan_all;
- }
+ }
- /* maybe reenable control and bulk lists */
+ /* maybe reenable control and bulk lists */
if (HC_IS_RUNNING(ohci_to_hcd(ohci)->state)
&& ohci_to_hcd(ohci)->state != HC_STATE_QUIESCING
&& !ohci->ed_rm_list) {
@@ -1041,20 +1039,20 @@
&ohci->regs->ed_bulkcurrent);
}
}
-
+
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, ohci->hc_control,
- &ohci->regs->control);
- }
+ ohci_writel (ohci, ohci->hc_control,
+ &ohci->regs->control);
+ }
if (command) {
if (ohci->flags & OHCI_QUIRK_ZFMICRO)
mdelay(1);
- ohci_writel (ohci, command, &ohci->regs->cmdstatus);
- }
+ ohci_writel (ohci, command, &ohci->regs->cmdstatus);
+ }
}
}
@@ -1074,19 +1072,19 @@
{
struct td *td = dl_reverse_done_list (ohci);
- while (td) {
+ while (td) {
struct td *td_next = td->next_dl_td;
struct urb *urb = td->urb;
urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
/* update URB's length and status from TD */
- td_done (ohci, urb, td);
- urb_priv->td_cnt++;
+ td_done (ohci, urb, td);
+ urb_priv->td_cnt++;
/* If all this urb's TDs are done, call complete() */
- if (urb_priv->td_cnt == urb_priv->length)
- finish_urb (ohci, urb);
+ if (urb_priv->td_cnt == urb_priv->length)
+ finish_urb (ohci, urb);
/* clean schedule: unlink EDs that are no longer busy */
if (list_empty (&ed->td_list)) {
@@ -1094,25 +1092,26 @@
start_ed_unlink (ohci, ed);
/* ... reenabling halted EDs only after fault cleanup */
- } else if ((ed->hwINFO & cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE))
+ } else if ((ed->hwINFO & cpu_to_hc32 (ohci,
+ ED_SKIP | ED_DEQUEUE))
== cpu_to_hc32 (ohci, ED_SKIP)) {
td = list_entry (ed->td_list.next, struct td, td_list);
- if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
+ if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
/* ... hc may need waking-up */
switch (ed->type) {
case PIPE_CONTROL:
ohci_writel (ohci, OHCI_CLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
case PIPE_BULK:
ohci_writel (ohci, OHCI_BLF,
- &ohci->regs->cmdstatus);
+ &ohci->regs->cmdstatus);
break;
}
}
}
- td = td_next;
- }
+ td = td_next;
+ }
}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 59e4364..b350d45 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -447,7 +447,7 @@
*/
.start = ohci_s3c2410_start,
.stop = ohci_stop,
- .shutdown = ohci_shutdown,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -492,7 +492,7 @@
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
- .shutdown = usb_hcd_platform_shutdown,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_s3c2410_drv_suspend, */
/*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 71371de..fe0090e 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -4,7 +4,7 @@
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
- *
+ *
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
@@ -12,7 +12,7 @@
*
* This file is licenced under the GPL.
*/
-
+
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/assabet.h>
@@ -31,7 +31,7 @@
{
unsigned int usb_rst = 0;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": starting SA-1111 OHCI USB Controller\n");
#ifdef CONFIG_SA1100_BADGE4
@@ -65,7 +65,7 @@
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
- printk(KERN_DEBUG __FILE__
+ printk(KERN_DEBUG __FILE__
": stopping SA-1111 OHCI USB Controller\n");
/*
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index fd93e7e..405257f 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -1,9 +1,9 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under the GPL.
*/
@@ -14,7 +14,7 @@
*/
typedef __u32 __bitwise __hc32;
typedef __u16 __bitwise __hc16;
-
+
/*
* OHCI Endpoint Descriptor (ED) ... holds TD queue
* See OHCI spec, section 4.2
@@ -24,7 +24,7 @@
*/
struct ed {
/* first fields are hardware-specified */
- __hc32 hwINFO; /* endpoint config bitmap */
+ __hc32 hwINFO; /* endpoint config bitmap */
/* info bits defined by hcd */
#define ED_DEQUEUE (1 << 27)
/* info bits defined by the hardware */
@@ -52,11 +52,11 @@
* usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
*/
u8 state; /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE 0x00 /* NOT linked to HC */
-#define ED_UNLINK 0x01 /* being unlinked from hc */
+#define ED_IDLE 0x00 /* NOT linked to HC */
+#define ED_UNLINK 0x01 /* being unlinked from hc */
#define ED_OPER 0x02 /* IS linked to hc */
- u8 type; /* PIPE_{BULK,...} */
+ u8 type; /* PIPE_{BULK,...} */
/* periodic scheduling params (for intr and iso) */
u8 branch;
@@ -70,7 +70,7 @@
#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
-
+
/*
* OHCI Transfer Descriptor (TD) ... one per transfer segment
* See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
@@ -107,22 +107,22 @@
/* (no hwINFO #defines yet for iso tds) */
- __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
- __hc32 hwNextTD; /* Next TD Pointer */
- __hc32 hwBE; /* Memory Buffer End Pointer */
+ __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
+ __hc32 hwNextTD; /* Next TD Pointer */
+ __hc32 hwBE; /* Memory Buffer End Pointer */
/* PSW is only for ISO. Only 1 PSW entry is used, but on
* big-endian PPC hardware that's the second entry.
*/
#define MAXPSW 2
- __hc16 hwPSW [MAXPSW];
+ __hc16 hwPSW [MAXPSW];
/* rest are purely for the driver's use */
- __u8 index;
- struct ed *ed;
- struct td *td_hash; /* dma-->td hashtable */
- struct td *next_dl_td;
- struct urb *urb;
+ __u8 index;
+ struct ed *ed;
+ struct td *td_hash; /* dma-->td hashtable */
+ struct td *next_dl_td;
+ struct urb *urb;
dma_addr_t td_dma; /* addr of this TD */
dma_addr_t data_dma; /* addr of data it points to */
@@ -152,8 +152,8 @@
#define TD_NOTACCESSED 0x0F
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
/* No Error */ 0,
/* CRC Error */ -EILSEQ,
/* Bit Stuff */ -EPROTO,
@@ -169,7 +169,7 @@
/* BufferOver */ -ECOMM,
/* BuffUnder */ -ENOSR,
/* (for HCD) */ -EALREADY,
- /* (for HCD) */ -EALREADY
+ /* (for HCD) */ -EALREADY
};
@@ -182,7 +182,7 @@
#define NUM_INTS 32
__hc32 int_table [NUM_INTS]; /* periodic schedule */
- /*
+ /*
* OHCI defines u16 frame_no, followed by u16 zero pad.
* Since some processors can't do 16 bit bus accesses,
* portable access must be a 32 bits wide.
@@ -262,10 +262,10 @@
* HcCommandStatus (cmdstatus) register masks
*/
#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
/*
* masks used with interrupt registers:
@@ -285,20 +285,20 @@
/* OHCI ROOT HUB REGISTER MASKS */
-
+
/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
/* roothub.status bits */
#define RH_HS_LPS 0x00000001 /* local power status */
@@ -333,7 +333,7 @@
} urb_priv_t;
#define TD_HASH_SIZE 64 /* power'o'two */
-// sizeof (struct td) ~= 64 == 2^6 ...
+// sizeof (struct td) ~= 64 == 2^6 ...
#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
@@ -364,11 +364,11 @@
struct ed *ed_bulktail; /* last in bulk list */
struct ed *ed_controltail; /* last in ctrl list */
- struct ed *periodic [NUM_INTS]; /* shadow int_table */
+ struct ed *periodic [NUM_INTS]; /* shadow int_table */
/*
* OTG controllers and transceivers need software interaction;
- * other external transceivers should be software-transparent
+ * other external transceivers should be software-transparent
*/
struct otg_transceiver *transceiver;
@@ -385,7 +385,7 @@
*/
int num_ports;
int load [NUM_INTS];
- u32 hc_control; /* copy of hc control reg */
+ u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
unsigned autostop:1; /* rh auto stopping/stopped */
@@ -598,7 +598,7 @@
}
#define FI 0x2edf /* 12000 bits per frame (-1) */
-#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
+#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
#define FIT (1 << 31)
#define LSTHRESH 0x628 /* lowspeed bit threshold */