Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IPoIB/cm: Optimize stale connection detection
IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ
IB/mthca: Fix posting >255 recv WRs for Tavor
RDMA/cma: Add check to validate that cm_id is bound to a device
RDMA/cma: Fix synchronization with device removal in cma_iw_handler
RDMA/cma: Simplify device removal handling code
IB/ehca: Disable scaling code by default, bump version number
IB/ehca: Beautify sysfs attribute code and fix compiler warnings
IB/ehca: Remove _irqsave, move #ifdef
IB/ehca: Fix AQP0/1 QP number
IB/ehca: Correctly set GRH mask bit in ehca_modify_qp()
IB/ehca: Serialize hypervisor calls in ehca_register_mr()
IB/ipath: Shadow the gpio_mask register
IB/mlx4: Fix uninitialized spinlock for 32-bit archs
mlx4_core: Remove unused doorbell_lock
net: Trivial MLX4_DEBUG dependency fix.
diff --git a/CREDITS b/CREDITS
index 6829e91..273d72b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2299,8 +2299,8 @@
W: http://oops.ghostprotocols.net:81/blog/
P: 1024D/9224DF01 D5DF E3BB E3C8 BCBB F8AD 841A B6AB 4681 9224 DF01
D: IPX, LLC, DCCP, cyc2x, wl3501_cs, net/ hacks
-S: R. Brasílio Itiberê, 4270/1010 - Água Verde
-S: 80240-060 - Curitiba - Paraná
+S: R. Brasílio Itiberê, 4270/1010 - Água Verde
+S: 80240-060 - Curitiba - Paraná
S: Brazil
N: Karsten Merker
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 6491b2c..3af3e65 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -73,9 +73,9 @@
If the new code is substantial, addition of subsystem-specific fault
injection might be appropriate.
-22: Newly-added code has been compiled with `gcc -W'. This will generate
- lots of noise, but is good for finding bugs like "warning: comparison
- between signed and unsigned".
+22: Newly-added code has been compiled with `gcc -W' (use "make
+ EXTRA_CFLAGS=-W"). This will generate lots of noise, but is good for
+ finding bugs like "warning: comparison between signed and unsigned".
23: Tested after it has been merged into the -mm patchset to make sure
that it still works with all of the other queued patches and various
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 676b798..498ff31 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -278,14 +278,6 @@
---------------------------
-What: i8xx_tco watchdog driver
-When: in 2.6.22
-Why: the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
- watchdog driver.
-Who: Wim Van Sebroeck <wim@iguana.be>
-
----------------------------
-
What: Multipath cached routing support in ipv4
When: in 2.6.23
Why: Code was merged, then submitter immediately disappeared leaving
@@ -336,3 +328,22 @@
---------------------------
+What: libata.spindown_compat module parameter
+When: Dec 2008
+Why: halt(8) synchronizes caches for and spins down libata disks
+ because libata didn't use to spin down disk on system halt
+ (only synchronized caches).
+ Spin down on system halt is now implemented and can be tested
+ using sysfs node /sys/class/scsi_disk/h:c:i:l/manage_start_stop.
+ Because issuing spin down command to an already spun down disk
+ makes some disks spin up just to spin down again, the old
+ behavior needs to be maintained till userspace tool is updated
+ to check the sysfs node and not to spin down disks with the
+ node set to one.
+ This module parameter is to give userspace tool the time to
+ get updated and should be removed after userspace is
+ reasonably updated.
+Who: Tejun Heo <htejun@gmail.com>
+
+---------------------------
+
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index f8528db..e8be0ab 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -66,7 +66,9 @@
used for several very different kinds of GPIO controller.
That said, if the convention is supported on their platform, drivers should
-use it when possible:
+use it when possible. Platforms should declare GENERIC_GPIO support in
+Kconfig (boolean true), which multi-platform drivers can depend on when
+using the include file:
#include <asm/gpio.h>
diff --git a/Documentation/kref.txt b/Documentation/kref.txt
index 42fe284..f38b59d 100644
--- a/Documentation/kref.txt
+++ b/Documentation/kref.txt
@@ -67,7 +67,7 @@
.
. do stuff with data here
.
- kref_put(data, data_release);
+ kref_put(&data->refcount, data_release);
}
int my_data_handler(void)
diff --git a/Documentation/mips/pci/pci.README b/Documentation/mips/pci/pci.README
deleted file mode 100644
index 8697ee4..0000000
--- a/Documentation/mips/pci/pci.README
+++ /dev/null
@@ -1,54 +0,0 @@
-
-Pete Popov, ppopov@pacbell.net
-07/11/2001
-
-This README briefly explains how to use the pci and pci_auto
-code in arch/mips/kernel. The code was ported from PowerPC and
-modified slightly. It has been tested pretty well on PPC on some
-rather complex systems with multiple bridges and devices behind
-each bridge. However, at the time this README was written, the
-mips port was tested only on boards with a single pci bus and
-no P2P bridges. It's very possible that on boards with P2P
-bridges some modifications have to be made. The code will
-evolve, no doubt, but currently every single mips board
-is doing its own pcibios thing and it has become a big
-mess. This generic pci code is meant to clean up the mips
-pci mess and make it easier to add pci support to new boards.
-
-inside the define for your board in arch/mips/config.in.
-For example, the Galileo EV96100 board looks like this:
-
-if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
- define_bool CONFIG_PCI y
- define_bool CONFIG_MIPS_GT96100 y
- define_bool CONFIG_NEW_PCI y
- define_bool CONFIG_SWAP_IO_SPACE y
-fi
-
-
-Next, if you want to use the arch/mips/kernel/pci code, which has the
-pcibios_init() function, add
-
-define_bool CONFIG_NEW_PCI y
-
-inside the define for your board. Again, the EV96100 example above
-show NEW_PCI turned on.
-
-
-Now you need to add your files to hook in your pci configuration
-cycles. Usually you'll need only a couple of files named something
-like pci_fixups.c and pci_ops.c. You can copy the templates
-provided and fill in the code.
-
-The file pci_ops.c should contain the pci configuration cycles routines.
-It also has the mips_pci_channels[] array which contains the descriptors
-of each pci controller.
-
-The file pci_fixups.c contains a few routines to do interrupt fixups,
-resources fixups, and, if needed, pci bios fixups.
-
-Usually you'll put your pci_fixups.c file in your board specific directory,
-since the functions in that file are board specific. The functions in
-pci_ops.c, on the other hand, are usually pci controller specific so that
-file could be shared among a few different boards using the same
-pci controller.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 73e9a17..57b878c 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -821,6 +821,7 @@
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
macpro MacPro support
+ w2jc ASUS W2JC
auto auto-config reading BIOS (default)
ALC883/888
@@ -852,6 +853,7 @@
3stack-dig 3-jack with SPDIF OUT
6stack-dig 6-jack with SPDIF OUT
3stack-660 3-jack (for ALC660VD)
+ lenovo Lenovo 3000 C200
auto auto-config reading BIOS (default)
CMI9880
@@ -909,6 +911,7 @@
macbook Intel Mac Book
macbook-pro-v1 Intel Mac Book Pro 1st generation
macbook-pro Intel Mac Book Pro 2nd generation
+ imac-intel Intel iMac
STAC9202/9250/9251
ref Reference board, base config
@@ -924,6 +927,10 @@
vaio Setup for VAIO FE550G/SZ110
vaio-ar Setup for VAIO AR
+ The model name "genric" is treated as a special case. When this
+ model is given, the driver uses the generic codec parser without
+ "codec-patch". It's sometimes good for testing and debugging.
+
If the default configuration doesn't work and one of the above
matches with your device, report it together with the PCI
subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
@@ -1278,6 +1285,7 @@
port - port number or -1 (disable)
irq - IRQ number or -1 (disable)
pnp - PnP detection - 0 = disable, 1 = enable (default)
+ uart_enter - Issue UART_ENTER command at open - bool, default = on
This module supports multiple devices and PnP.
@@ -1692,6 +1700,17 @@
This module supports multiple devices, autoprobe and hotplugging.
+ Module snd-usb-caiaq
+ --------------------
+
+ Module for caiaq UB audio interfaces,
+ * Native Instruments RigKontrol2
+ * Native Instruments Kore Controller
+ * Native Instruments Audio Kontrol 1
+ * Native Instruments Audio 8 DJ
+
+ This module supports multiple devices, autoprobe and hotplugging.
+
Module snd-usb-usx2y
--------------------
@@ -2046,4 +2065,4 @@
https://bugtrack.alsa-project.org/bugs/
ALSA Developers ML
- mailto:alsa-devel@lists.sourceforge.net
+ mailto:alsa-devel@alsa-project.org
diff --git a/Documentation/sound/alsa/Bt87x.txt b/Documentation/sound/alsa/Bt87x.txt
index 11edb2f..f158cde 100644
--- a/Documentation/sound/alsa/Bt87x.txt
+++ b/Documentation/sound/alsa/Bt87x.txt
@@ -36,8 +36,8 @@
other values than the default 32000 (often it's 44100 or 64000).
If you have an unknown card, please mail the ID and board name to
-<alsa-devel@lists.sf.net>, regardless of whether audio capture works or
-not, so that future versions of this driver know about your card.
+<alsa-devel@alsa-project.org>, regardless of whether audio capture works
+or not, so that future versions of this driver know about your card.
Audio modes
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index d7bb2e2..712e8c8 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -52,7 +52,7 @@
51 -> ProVideo PV952 [1540:9524]
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
- 54 -> LifeView FlyTV Platinum FM / Gold [5168:0214,1489:0214,5168:0304]
+ 54 -> LifeView FlyTV Platinum FM / Gold [5168:0214,5168:5214,1489:0214,5168:0304]
55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [5168:0306,4E42:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
@@ -111,3 +111,6 @@
110 -> Avermedia M102 [1461:f31e]
111 -> ASUS P7131 4871 [1043:4871]
112 -> ASUSTeK P7131 Hybrid [1043:4876]
+113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6]
+114 -> KWorld DVB-T 210 [17de:7250]
+115 -> Sabrent PCMCIA TV-PCB05 [0919:2003]
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 5fe0ad7..279717c 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -355,6 +355,9 @@
Vendor ID Product ID
--------- ----------
+0x0458 0x7025
+0x045e 0x00f5
+0x045e 0x00f7
0x0471 0x0327
0x0471 0x0328
0x0c45 0x6001
@@ -432,7 +435,7 @@
HV7131D Hynix Semiconductor | Yes No No No
HV7131R Hynix Semiconductor | No Yes Yes Yes
MI-0343 Micron Technology | Yes No No No
-MI-0360 Micron Technology | No Yes No No
+MI-0360 Micron Technology | No Yes Yes Yes
OV7630 OmniVision Technologies | Yes Yes No No
OV7660 OmniVision Technologies | No No Yes Yes
PAS106B PixArt Imaging | Yes No No No
@@ -478,13 +481,12 @@
This driver supports two different video formats: the first one is the "8-bit
Sequential Bayer" format and can be used to obtain uncompressed video data
from the device through the current I/O method, while the second one provides
-"raw" compressed video data (without frame headers not related to the
-compressed data). The compression quality may vary from 0 to 1 and can be
-selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2
-ioctl's. For maximum flexibility, both the default active video format and the
-default compression quality depend on how the image sensor being used is
-initialized (as described in the documentation of the API for the image sensors
-supplied by this driver).
+either "raw" compressed video data (without frame headers not related to the
+compressed data) or standard JPEG (with frame headers). The compression quality
+may vary from 0 to 1 and can be selected or queried thanks to the
+VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2 ioctl's. For maximum flexibility,
+both the default active video format and the default compression quality
+depend on how the image sensor being used is initialized.
11. Video frame formats [1]
diff --git a/MAINTAINERS b/MAINTAINERS
index cfd26dd..bbeb5b6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -372,7 +372,7 @@
P: Johannes Berg
M: johannes@sipsolutions.net
L: linuxppc-dev@ozlabs.org
-L: alsa-devel@alsa-project.org
+L: alsa-devel@alsa-project.org (subscribers-only)
S: Maintained
APM DRIVER
@@ -1712,18 +1712,10 @@
S: Maintained
i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P: Dave Jones
-M: davej@codemonkey.org.uk
P: H. Peter Anvin
M: hpa@zytor.com
S: Maintained
-i810 TCO TIMER WATCHDOG
-P: Nils Faerber
-M: nils@kernelconcepts.de
-W: http://www.kernelconcepts.de/
-S: Maintained
-
IA64 (Itanium) PLATFORM
P: Tony Luck
M: tony.luck@intel.com
@@ -3245,13 +3237,13 @@
SOUND
P: Jaroslav Kysela
M: perex@suse.cz
-L: alsa-devel@alsa-project.org
+L: alsa-devel@alsa-project.org (subscribers-only)
S: Maintained
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
P: Liam Girdwood
M: liam.girdwood@wolfsonmicro.com
-L: alsa-devel@alsa-project.org
+L: alsa-devel@alsa-project.org (subscribers-only)
S: Supported
SPI SUBSYSTEM
diff --git a/Makefile b/Makefile
index dfe559c..e6990e2 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 21
-EXTRAVERSION =
+SUBLEVEL = 22
+EXTRAVERSION = -rc1
NAME = Nocturnal Monster Puppy
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d7c0984..e55bbd3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -114,9 +114,6 @@
bool
default y
-config GENERIC_BUST_SPINLOCK
- bool
-
config ARCH_MAY_HAVE_PC_FDC
bool
@@ -247,6 +244,15 @@
help
Support for Motorola's i.MX family of processors (MX1, MXL).
+config ARCH_IOP13XX
+ bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
+ select PCI
+ select ARCH_SUPPORTS_MSI
+ help
+ Support for Intel's IOP13XX (XScale) family of processors.
+
config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
@@ -264,22 +270,12 @@
help
Support for Intel's IOP33X (XScale) family of processors.
-config ARCH_IOP13XX
- bool "IOP13xx-based"
+config ARCH_IXP23XX
+ bool "IXP23XX-based"
depends on MMU
- select PLAT_IOP
- select PCI
- select ARCH_SUPPORTS_MSI
+ select PCI
help
- Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IXP4XX
- bool "IXP4xx-based"
- depends on MMU
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Intel's IXP4XX (XScale) family of processors.
+ Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
@@ -288,12 +284,13 @@
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
-config ARCH_IXP23XX
- bool "IXP23XX-based"
+config ARCH_IXP4XX
+ bool "IXP4xx-based"
depends on MMU
- select PCI
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Intel's IXP23xx (XScale) family of processors.
+ Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_L7200
bool "LinkUp-L7200"
@@ -308,6 +305,12 @@
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
config ARCH_NS9XXX
bool "NetSilicon NS9xxx"
help
@@ -354,7 +357,6 @@
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
- select GENERIC_TIME
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -377,6 +379,13 @@
core with a wide array of integrated devices for
hand-held and low-power applications.
+config ARCH_DAVINCI
+ bool "TI DaVinci"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for TI's DaVinci platform.
+
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
@@ -445,6 +454,10 @@
source "arch/arm/mach-ns9xxx/Kconfig"
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -505,7 +518,7 @@
bool
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -674,7 +687,8 @@
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4
+ ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_KS8695
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 00ea430..cbd5010 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,6 +135,8 @@
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000
+ machine-$(CONFIG_ARCH_DAVINCI) := davinci
+ machine-$(CONFIG_ARCH_KS8695) := ks8695
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
new file mode 100644
index 0000000..fbe8b30
--- /dev/null
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -0,0 +1,957 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Mon May 7 16:30:40 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+CONFIG_ARCH_AT91SAM9RL=y
+
+#
+# AT91SAM9RL Board Type
+#
+CONFIG_MACH_AT91SAM9RLEK=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=24576
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_DETECT=y
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
new file mode 100644
index 0000000..8ab21a0
--- /dev/null
+++ b/arch/arm/configs/ks8695_defconfig
@@ -0,0 +1,880 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc4
+# Thu May 25 15:42:51 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_KS8695=y
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+# CONFIG_MACH_DSM320 is not set
+# CONFIG_MACH_CM4002 is not set
+# CONFIG_MACH_CM4008 is not set
+# CONFIG_MACH_CM40xx is not set
+# CONFIG_MACH_LITE300 is not set
+# CONFIG_MACH_SE4200 is not set
+# CONFIG_MACH_MANGA_KS8695 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index a6698dc..6db6392 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,15 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Sat Jun 24 22:45:14 2006
+# Linux kernel version: 2.6.21
+# Mon Apr 30 21:23:20 2007
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -26,18 +38,25 @@
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
@@ -49,10 +68,11 @@
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -60,14 +80,17 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -85,18 +108,29 @@
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -104,12 +138,6 @@
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
#
# Intel PXA2xx Implementations
@@ -133,11 +161,16 @@
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
#
@@ -147,16 +180,16 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
-CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCMCIA_PXA2XX=y
#
# Kernel Features
@@ -164,7 +197,8 @@
CONFIG_PREEMPT=y
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -174,6 +208,8 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
@@ -184,8 +220,9 @@
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
# Floating point emulation
@@ -203,16 +240,16 @@
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
+# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
+# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_APM_EMULATION is not set
#
# Networking
@@ -222,13 +259,15 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -246,24 +285,25 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -271,29 +311,16 @@
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -318,7 +345,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -378,6 +404,7 @@
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_PXA_FICP is not set
+# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -401,14 +428,20 @@
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
-CONFIG_IEEE80211=m
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
#
# Device Drivers
@@ -420,16 +453,13 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
@@ -445,12 +475,13 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=y
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
@@ -490,9 +521,8 @@
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_TRIZEPS4 is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_SHARP_SL is not set
@@ -501,42 +531,45 @@
#
# Self-contained MTD device drivers
#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2000=y
+CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
+CONFIG_MTD_DOCPROBE_HIGH=y
+# CONFIG_MTD_DOCPROBE_55AA is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
# CONFIG_MTD_NAND_SHARPSL is not set
# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+# CONFIG_MTD_ONENAND_OTP is not set
#
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
#
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
#
# Parallel port support
@@ -546,6 +579,7 @@
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -556,9 +590,9 @@
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -566,6 +600,7 @@
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -585,27 +620,27 @@
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
-CONFIG_IDE_PXA_CF=y
-CONFIG_IDE_ARM=y
+# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
@@ -614,21 +649,23 @@
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
#
# PCMCIA SCSI adapter support
@@ -640,6 +677,14 @@
# CONFIG_PCMCIA_SYM53C500 is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_PLATFORM=m
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -675,10 +720,14 @@
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
-CONFIG_DAVICOM_PHY=y
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
@@ -687,6 +736,7 @@
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
+# CONFIG_SMC911X is not set
#
# Ethernet (1000 Mbit)
@@ -701,41 +751,23 @@
#
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
+CONFIG_HERMES=y
# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
+# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_HOSTAP=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_CS=m
-CONFIG_NET_WIRELESS=y
+CONFIG_HOSTAP_CS=y
+# CONFIG_ZD1211RW is not set
#
# PCMCIA network device support
@@ -756,6 +788,7 @@
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
+CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
@@ -770,6 +803,7 @@
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -789,22 +823,27 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=y
+CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_UCB1400=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
@@ -823,6 +862,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -862,15 +902,12 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
-#
-
-#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
@@ -882,7 +919,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -902,6 +938,7 @@
#
CONFIG_I2C_PXA=y
CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
@@ -911,7 +948,7 @@
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -924,18 +961,8 @@
#
# SPI support
#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
@@ -947,9 +974,11 @@
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
@@ -973,10 +1002,15 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -987,16 +1021,15 @@
#
#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
#
-CONFIG_UCB1400=y
-CONFIG_UCB1400_TS=y
+# CONFIG_MFD_SM501 is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
@@ -1007,13 +1040,13 @@
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -1024,17 +1057,28 @@
#
# Graphics support
#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -1063,11 +1107,6 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
#
# Sound
@@ -1082,7 +1121,7 @@
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
@@ -1093,13 +1132,14 @@
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_DETECT=y
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
@@ -1124,9 +1164,32 @@
# CONFIG_SND_PDAUDIOCF is not set
#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
#
# USB support
@@ -1141,7 +1204,7 @@
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
@@ -1151,7 +1214,8 @@
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
@@ -1179,38 +1243,25 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-CONFIG_USB_TOUCHSCREEN=m
-# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
-# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
-# CONFIG_USB_TOUCHSCREEN_3M is not set
-# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
@@ -1225,9 +1276,9 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1236,23 +1287,66 @@
#
# USB Serial Converter support
#
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
@@ -1262,9 +1356,10 @@
#
# USB Gadget Support
#
-CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
@@ -1272,15 +1367,14 @@
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
#
# MMC/SD Card support
@@ -1295,8 +1389,8 @@
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -1304,17 +1398,25 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
@@ -1328,6 +1430,7 @@
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
@@ -1335,10 +1438,12 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@@ -1365,8 +1470,10 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -1376,18 +1483,17 @@
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -1407,20 +1513,18 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
@@ -1430,7 +1534,9 @@
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1504,22 +1610,28 @@
CONFIG_NLS_UTF8=m
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
CONFIG_DEBUG_USER=y
#
@@ -1531,22 +1643,31 @@
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_SECLVL is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_MD4=y
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1554,12 +1675,13 @@
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
@@ -1569,6 +1691,7 @@
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
@@ -1577,3 +1700,6 @@
CONFIG_ZLIB_DEFLATE=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 4779f47..9179e82 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -76,6 +76,7 @@
/* networking */
EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
EXPORT_SYMBOL(__csum_ipv6_magic);
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index bdbd7da..f56d48c 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -41,11 +41,11 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/kthread.h>
+#include <linux/io.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/mach/irq.h>
@@ -958,6 +958,31 @@
}
EXPORT_SYMBOL(ecard_release_resources);
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
+{
+ ec->irq_data = irq_data;
+ barrier();
+ ec->ops = ops;
+}
+EXPORT_SYMBOL(ecard_setirq);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+ unsigned long offset, unsigned long maxsize)
+{
+ unsigned long start = ecard_resource_start(ec, res);
+ unsigned long end = ecard_resource_end(ec, res);
+
+ if (offset > (end - start))
+ return NULL;
+
+ start += offset;
+ if (maxsize && end - start > maxsize)
+ end = start + maxsize;
+
+ return devm_ioremap(&ec->dev, start, end - start);
+}
+EXPORT_SYMBOL(ecardm_iomap);
+
/*
* Probe for an expansion card.
*
@@ -1133,6 +1158,14 @@
drv->remove(ec);
ecard_release(ec);
+ /*
+ * Restore the default operations. We ensure that the
+ * ops are set before we change the data.
+ */
+ ec->ops = &ecard_default_ops;
+ barrier();
+ ec->irq_data = NULL;
+
return 0;
}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 77ef35e..398d0c0 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -52,21 +52,15 @@
return trace->nr_entries >= trace->max_entries;
}
-void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
+void save_stack_trace(struct stack_trace *trace)
{
struct stack_trace_data data;
unsigned long fp, base;
data.trace = trace;
data.skip = trace->skip;
-
- if (task) {
- base = (unsigned long)task_stack_page(task);
- fp = 0; /* FIXME */
- } else {
- base = (unsigned long)task_stack_page(current);
- asm("mov %0, fp" : "=r" (fp));
- }
+ base = (unsigned long)task_stack_page(current);
+ asm("mov %0, fp" : "=r" (fp));
walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
}
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index d0540e4..1533d3e 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -512,7 +512,7 @@
#ifdef CONFIG_NO_IDLE_HZ
if (system_timer->dyn_tick)
- system_timer->dyn_tick->lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&system_timer->dyn_tick->lock);
#endif
}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 018d637..a31157f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -17,6 +17,9 @@
config ARCH_AT91SAM9263
bool "AT91SAM9263"
+config ARCH_AT91SAM9RL
+ bool "AT91SAM9RL"
+
endchoice
# ----------------------------------------------------------
@@ -152,6 +155,20 @@
# ----------------------------------------------------------
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9RL
+ help
+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a412ae1..a4d80eb 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
@@ -36,9 +37,13 @@
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+# AT91SAM9RL board-specific support
+obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_MACH_KB9200) += leds.o
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 2624a4f..70599bc 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -22,9 +22,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 40586e2..ffd3154 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -22,9 +22,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 8e78199..9db58da 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -23,9 +23,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 2b2e18a..6356957 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -22,9 +22,6 @@
#include "generic.h"
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
/* --------------------------------------------------------------------
* USB Host
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
new file mode 100644
index 0000000..4813a35
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -0,0 +1,341 @@
+/*
+ * arch/arm/mach-at91/at91sam9rl.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9rl_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc at91sam9rl_sram_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
+ .type = MT_DEVICE,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+ .name = "pioD_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+ .name = "spi_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_SPI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+ .name = "pwmc_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+ .name = "tsc_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_TSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioD_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &spi_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &pwmc_clk,
+ &tsc_clk,
+ &dma_clk,
+ &udphs_clk,
+ &lcdc_clk,
+ &ac97_clk,
+ // irq0
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9rl_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9rl_gpio[] = {
+ {
+ .id = AT91SAM9RL_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9RL_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9RL_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91SAM9RL_ID_PIOD,
+ .offset = AT91_PIOD,
+ .clock = &pioD_clk,
+ }
+};
+
+static void at91sam9rl_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9RL processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9rl_initialize(unsigned long main_clock)
+{
+ unsigned long cidr, sram_size;
+
+ /* Map peripherals */
+ iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
+
+ cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+ switch (cidr & AT91_CIDR_SRAMSIZ) {
+ case AT91_CIDR_SRAMSIZ_32K:
+ sram_size = 2 * SZ_16K;
+ break;
+ case AT91_CIDR_SRAMSIZ_16K:
+ default:
+ sram_size = SZ_16K;
+ }
+
+ at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+ at91sam9rl_sram_desc->length = sram_size;
+
+ /* Map SRAM */
+ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+
+ at91_arch_reset = at91sam9rl_reset;
+ at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9rl_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9rl_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface */
+ 6, /* Two-Wire Interface 0 */
+ 6, /* Two-Wire Interface 1 */
+ 5, /* Serial Peripheral Interface */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 0,
+ 0, /* Touch Screen Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Device High speed port */
+ 2, /* LCD Controller */
+ 6, /* AC97 Controller */
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9rl_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
new file mode 100644
index 0000000..cd7532b
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -0,0 +1,630 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91sam9rl_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_MCI,
+ .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_MCI,
+ .end = AT91SAM9RL_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9rl_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_TWI0,
+ .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_TWI0,
+ .end = AT91SAM9RL_ID_TWI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ platform_device_register(&at91sam9rl_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SPI,
+ .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SPI,
+ .end = AT91SAM9RL_ID_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_spi_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi_resources,
+ .num_resources = ARRAY_SIZE(spi_resources),
+};
+
+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
+
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */
+
+ /* Enable SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else
+ cs_pin = spi_standard_cs[devices[i].chip_select];
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+ platform_device_register(&at91sam9rl_spi_device);
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_LCDC_BASE,
+ .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_LCDC,
+ .end = AT91SAM9RL_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+#if defined(CONFIG_FB_INTSRAM)
+ [2] = {
+ .start = AT91SAM9RL_SRAM_BASE,
+ .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data) {
+ return;
+ }
+
+ at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
+ at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
+ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
+ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
+ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
+ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9rl_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US0,
+ .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US0,
+ .end = AT91SAM9RL_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US1,
+ .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US1,
+ .end = AT91SAM9RL_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US2,
+ .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US2,
+ .end = AT91SAM9RL_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_US3,
+ .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_US3,
+ .end = AT91SAM9RL_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9rl_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .platform_data = &uart3_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9rl_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9rl_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9rl_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_usart3_pins();
+ at91_uarts[i] = &at91sam9rl_uart3_device;
+ at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
+ break;
+ case 4:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9rl_dbgu_device;
+ at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index bcf7153..1f0c8a4 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -60,6 +60,9 @@
/* Initialize processor: 18.432 MHz crystal */
at91sam9261_initialize(18432000);
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
}
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
new file mode 100644
index 0000000..30c79ac
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9rl_initialize(12000000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9rl_init_interrupts(NULL);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PA15,
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 256 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 256 * 1024 ,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PD17,
+ .enable_pin = AT91_PIN_PB6,
+ .partition_info = nand_partitions,
+ .bus_width_16 = 0,
+};
+
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+};
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D50VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* I2C */
+ at91_add_device_i2c();
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &ek_mmc_data);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
+}
+
+MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index bda2622..68ed71a 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -13,12 +13,14 @@
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
+extern void __init at91sam9rl_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
new file mode 100644
index 0000000..bac988e
--- /dev/null
+++ b/arch/arm/mach-davinci/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_DAVINCI
+
+menu "TI DaVinci Implementations"
+
+comment "DaVinci Core Type"
+
+config ARCH_DAVINCI644x
+ default y
+ bool "DaVinci 644x based system"
+
+comment "DaVinci Board Type"
+
+config MACH_DAVINCI_EVM
+ bool "TI DaVinci EVM"
+ default y
+ depends on ARCH_DAVINCI644x
+ help
+ Configure this option to specify the whether the board used
+ for development is a DaVinci EVM
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
new file mode 100644
index 0000000..a8f88cd
--- /dev/null
+++ b/arch/arm/mach-davinci/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+#
+
+# Common objects
+obj-y := time.o irq.o serial.o io.o id.o psc.o
+
+# Board specific
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
new file mode 100644
index 0000000..e1dd366
--- /dev/null
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x80800000
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
new file mode 100644
index 0000000..633c12e
--- /dev/null
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -0,0 +1,131 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/common.h>
+
+/* other misc. init functions */
+void __init davinci_psc_init(void);
+void __init davinci_irq_init(void);
+void __init davinci_map_common_io(void);
+
+/* NOR Flash base address set to CS0 by default */
+#define NOR_FLASH_PHYS 0x02000000
+
+static struct mtd_partition davinci_evm_partitions[] = {
+ /* bootloader (U-Boot, etc) in first 4 sectors */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 4 * SZ_64K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next 1 sectors */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data davinci_evm_flash_data = {
+ .width = 2,
+ .parts = davinci_evm_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_evm_partitions),
+};
+
+/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+ * limits addresses to 16M, so using addresses past 16M will wrap */
+static struct resource davinci_evm_flash_resource = {
+ .start = NOR_FLASH_PHYS,
+ .end = NOR_FLASH_PHYS + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device davinci_evm_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &davinci_evm_flash_resource,
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &davinci_evm_flash_device,
+};
+
+static void __init
+davinci_evm_map_io(void)
+{
+ davinci_map_common_io();
+}
+
+static __init void davinci_evm_init(void)
+{
+ davinci_psc_init();
+
+#if defined(CONFIG_BLK_DEV_DAVINCI) || defined(CONFIG_BLK_DEV_DAVINCI_MODULE)
+ printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
+ "but share pins.\n\t Disable IDE for NOR support.\n");
+#endif
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+}
+
+static __init void davinci_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+ /* Maintainer: MontaVista Software <source@mvista.com> */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (io_p2v(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_evm_map_io,
+ .init_irq = davinci_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
new file mode 100644
index 0000000..70608f7
--- /dev/null
+++ b/arch/arm/mach-davinci/id.c
@@ -0,0 +1,94 @@
+/*
+ * Davinci CPU identification code
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * Derived from OMAP1 CPU identification code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define JTAG_ID_BASE 0x01c40028
+
+struct davinci_id {
+ u8 variant; /* JTAG ID bits 31:28 */
+ u16 part_no; /* JTAG ID bits 27:12 */
+ u32 manufacturer; /* JTAG ID bits 11:1 */
+ u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */
+};
+
+/* Register values to detect the DaVinci version */
+static struct davinci_id davinci_ids[] __initdata = {
+ {
+ /* DM6446 */
+ .part_no = 0xb700,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64460000,
+ },
+};
+
+/*
+ * Get Device Part No. from JTAG ID register
+ */
+static u16 __init davinci_get_part_no(void)
+{
+ u32 dev_id, part_no;
+
+ dev_id = davinci_readl(JTAG_ID_BASE);
+
+ part_no = ((dev_id >> 12) & 0xffff);
+
+ return part_no;
+}
+
+/*
+ * Get Device Revision from JTAG ID register
+ */
+static u8 __init davinci_get_variant(void)
+{
+ u32 variant;
+
+ variant = davinci_readl(JTAG_ID_BASE);
+
+ variant = (variant >> 28) & 0xf;
+
+ return variant;
+}
+
+void __init davinci_check_revision(void)
+{
+ int i;
+ u16 part_no;
+ u8 variant;
+
+ part_no = davinci_get_part_no();
+ variant = davinci_get_variant();
+
+ /* First check only the major version in a safe way */
+ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
+ if (part_no == (davinci_ids[i].part_no)) {
+ system_rev = davinci_ids[i].type;
+ break;
+ }
+ }
+
+ /* Check if we can find the dev revision */
+ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
+ if (part_no == davinci_ids[i].part_no &&
+ variant == davinci_ids[i].variant) {
+ system_rev = davinci_ids[i].type;
+ break;
+ }
+ }
+
+ printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+}
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
new file mode 100644
index 0000000..87fae6f
--- /dev/null
+++ b/arch/arm/mach-davinci/io.c
@@ -0,0 +1,51 @@
+/*
+ * DaVinci I/O mapping code
+ *
+ * Copyright (C) 2005-2006 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tlb.h>
+#include <asm/io.h>
+#include <asm/memory.h>
+
+#include <asm/mach/map.h>
+
+extern void davinci_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc davinci_io_desc[] __initdata = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+void __init davinci_map_common_io(void)
+{
+ iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
+
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /* We want to check CPU revision early for cpu_is_xxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
+ davinci_check_revision();
+}
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
new file mode 100644
index 0000000..1333d84
--- /dev/null
+++ b/arch/arm/mach-davinci/irq.c
@@ -0,0 +1,226 @@
+/*
+ * Interrupt handler for DaVinci boards.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/irq.h>
+
+#define IRQ_BIT(irq) ((irq) & 0x1f)
+
+#define FIQ_REG0_OFFSET 0x0000
+#define FIQ_REG1_OFFSET 0x0004
+#define IRQ_REG0_OFFSET 0x0008
+#define IRQ_REG1_OFFSET 0x000C
+#define IRQ_ENT_REG0_OFFSET 0x0018
+#define IRQ_ENT_REG1_OFFSET 0x001C
+#define IRQ_INCTL_REG_OFFSET 0x0020
+#define IRQ_EABASE_REG_OFFSET 0x0024
+#define IRQ_INTPRI0_REG_OFFSET 0x0030
+#define IRQ_INTPRI7_REG_OFFSET 0x004C
+
+static inline unsigned int davinci_irq_readl(int offset)
+{
+ return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+}
+
+static inline void davinci_irq_writel(unsigned long value, int offset)
+{
+ davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+}
+
+/* Disable interrupt */
+static void davinci_mask_irq(unsigned int irq)
+{
+ unsigned int mask;
+ u32 l;
+
+ mask = 1 << IRQ_BIT(irq);
+
+ if (irq > 31) {
+ l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET);
+ l &= ~mask;
+ davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET);
+ } else {
+ l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET);
+ l &= ~mask;
+ davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET);
+ }
+}
+
+/* Enable interrupt */
+static void davinci_unmask_irq(unsigned int irq)
+{
+ unsigned int mask;
+ u32 l;
+
+ mask = 1 << IRQ_BIT(irq);
+
+ if (irq > 31) {
+ l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET);
+ l |= mask;
+ davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET);
+ } else {
+ l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET);
+ l |= mask;
+ davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET);
+ }
+}
+
+/* EOI interrupt */
+static void davinci_ack_irq(unsigned int irq)
+{
+ unsigned int mask;
+
+ mask = 1 << IRQ_BIT(irq);
+
+ if (irq > 31)
+ davinci_irq_writel(mask, IRQ_REG1_OFFSET);
+ else
+ davinci_irq_writel(mask, IRQ_REG0_OFFSET);
+}
+
+static struct irq_chip davinci_irq_chip_0 = {
+ .name = "AINTC",
+ .ack = davinci_ack_irq,
+ .mask = davinci_mask_irq,
+ .unmask = davinci_unmask_irq,
+};
+
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+ [IRQ_VDINT0] = 2,
+ [IRQ_VDINT1] = 6,
+ [IRQ_VDINT2] = 6,
+ [IRQ_HISTINT] = 6,
+ [IRQ_H3AINT] = 6,
+ [IRQ_PRVUINT] = 6,
+ [IRQ_RSZINT] = 6,
+ [7] = 7,
+ [IRQ_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_VLCDINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_EMACINT] = 4,
+ [14] = 7,
+ [15] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_PSCIN] = 7,
+ [21] = 7,
+ [IRQ_IDE] = 4,
+ [23] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_SDIOINT] = 7,
+ [28] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_VLQINT] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_UARTINT2] = 3,
+ [IRQ_SPINT0] = 3,
+ [IRQ_SPINT1] = 3,
+ [45] = 7,
+ [IRQ_DSP2ARM0] = 4,
+ [IRQ_DSP2ARM1] = 4,
+ [IRQ_GPIO0] = 7,
+ [IRQ_GPIO1] = 7,
+ [IRQ_GPIO2] = 7,
+ [IRQ_GPIO3] = 7,
+ [IRQ_GPIO4] = 7,
+ [IRQ_GPIO5] = 7,
+ [IRQ_GPIO6] = 7,
+ [IRQ_GPIO7] = 7,
+ [IRQ_GPIOBNK0] = 7,
+ [IRQ_GPIOBNK1] = 7,
+ [IRQ_GPIOBNK2] = 7,
+ [IRQ_GPIOBNK3] = 7,
+ [IRQ_GPIOBNK4] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/* ARM Interrupt Controller Initialization */
+void __init davinci_irq_init(void)
+{
+ unsigned i;
+ const u8 *priority = default_priorities;
+
+ /* Clear all interrupt requests */
+ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
+
+ /* Disable all interrupts */
+ davinci_irq_writel(0x0, IRQ_ENT_REG0_OFFSET);
+ davinci_irq_writel(0x0, IRQ_ENT_REG1_OFFSET);
+
+ /* Interrupts disabled immediately, IRQ entry reflects all */
+ davinci_irq_writel(0x0, IRQ_INCTL_REG_OFFSET);
+
+ /* we don't use the hardware vector table, just its entry addresses */
+ davinci_irq_writel(0, IRQ_EABASE_REG_OFFSET);
+
+ /* Clear all interrupt requests */
+ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG0_OFFSET);
+ davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
+
+ for (i = IRQ_INTPRI0_REG_OFFSET; i <= IRQ_INTPRI7_REG_OFFSET; i += 4) {
+ unsigned j;
+ u32 pri;
+
+ for (j = 0, pri = 0; j < 32; j += 4, priority++)
+ pri |= (*priority & 0x07) << j;
+ davinci_irq_writel(pri, i);
+ }
+
+ /* set up genirq dispatch for ARM INTC */
+ for (i = 0; i < DAVINCI_N_AINTC_IRQ; i++) {
+ set_irq_chip(i, &davinci_irq_chip_0);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ if (i != IRQ_TINT1_TINT34)
+ set_irq_handler(i, handle_edge_irq);
+ else
+ set_irq_handler(i, handle_level_irq);
+ }
+}
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
new file mode 100644
index 0000000..e1b0050
--- /dev/null
+++ b/arch/arm/mach-davinci/psc.c
@@ -0,0 +1,113 @@
+/*
+ * TI DaVinci Power and Sleep Controller (PSC)
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/psc.h>
+
+#define PTCMD __REG(0x01C41120)
+#define PDSTAT __REG(0x01C41200)
+#define PDCTL1 __REG(0x01C41304)
+#define EPCPR __REG(0x01C41070)
+#define PTSTAT __REG(0x01C41128)
+
+#define MDSTAT IO_ADDRESS(0x01C41800)
+#define MDCTL IO_ADDRESS(0x01C41A00)
+
+#define PINMUX0 __REG(0x01c40000)
+#define PINMUX1 __REG(0x01c40004)
+#define VDD3P3V_PWDN __REG(0x01C40048)
+
+static void davinci_psc_mux(unsigned int id)
+{
+ switch (id) {
+ case DAVINCI_LPSC_ATA:
+ PINMUX0 |= (1 << 17) | (1 << 16);
+ break;
+ case DAVINCI_LPSC_MMC_SD:
+ /* VDD power manupulations are done in U-Boot for CPMAC
+ * so applies to MMC as well
+ */
+ /*Set up the pull regiter for MMC */
+ VDD3P3V_PWDN = 0x0;
+ PINMUX1 &= (~(1 << 9));
+ break;
+ case DAVINCI_LPSC_I2C:
+ PINMUX1 |= (1 << 7);
+ break;
+ case DAVINCI_LPSC_McBSP:
+ PINMUX1 |= (1 << 10);
+ break;
+ default:
+ break;
+ }
+}
+
+/* Enable or disable a PSC domain */
+void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+{
+ volatile unsigned int *mdstat = (unsigned int *)((int)MDSTAT + 4 * id);
+ volatile unsigned int *mdctl = (unsigned int *)((int)MDCTL + 4 * id);
+
+ if (id < 0)
+ return;
+
+ if (enable)
+ *mdctl |= 0x00000003; /* Enable Module */
+ else
+ *mdctl &= 0xFFFFFFF2; /* Disable Module */
+
+ if ((PDSTAT & 0x00000001) == 0) {
+ PDCTL1 |= 0x1;
+ PTCMD = (1 << domain);
+ while ((((EPCPR >> domain) & 1) == 0));
+
+ PDCTL1 |= 0x100;
+ while (!(((PTSTAT >> domain) & 1) == 0));
+ } else {
+ PTCMD = (1 << domain);
+ while (!(((PTSTAT >> domain) & 1) == 0));
+ }
+
+ if (enable)
+ while (!((*mdstat & 0x0000001F) == 0x3));
+ else
+ while (!((*mdstat & 0x0000001F) == 0x2));
+
+ if (enable)
+ davinci_psc_mux(id);
+}
+
+void __init davinci_psc_init(void)
+{
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
+
+ /* Turn on WatchDog timer LPSC. Needed for RESET to work */
+ davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+}
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
new file mode 100644
index 0000000..8368c93
--- /dev/null
+++ b/arch/arm/mach-davinci/serial.c
@@ -0,0 +1,96 @@
+/*
+ * TI DaVinci serial driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/arch/serial.h>
+#include <asm/arch/irqs.h>
+
+#define UART_DAVINCI_PWREMU 0x0c
+
+static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
+ int offset)
+{
+ offset <<= up->regshift;
+ return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void davinci_serial_outp(struct plat_serial8250_port *p,
+ int offset, int value)
+{
+ offset <<= p->regshift;
+ __raw_writeb(value, p->membase + offset);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
+ .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 27000000,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static void __init davinci_serial_reset(struct plat_serial8250_port *p)
+{
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ unsigned int pwremu = 0;
+
+ davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+
+ davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ mdelay(10);
+
+ pwremu |= (0x3 << 13);
+ pwremu |= 0x1;
+ davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+}
+
+static int __init davinci_init(void)
+{
+ davinci_serial_reset(&serial_platform_data[0]);
+ return platform_device_register(&serial_device);
+}
+
+arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
new file mode 100644
index 0000000..4d8425d
--- /dev/null
+++ b/arch/arm/mach-davinci/time.c
@@ -0,0 +1,372 @@
+/*
+ * DaVinci timer subsystem
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/errno.h>
+#include <asm/arch/io.h>
+
+static struct clock_event_device clockevent_davinci;
+
+#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
+
+enum {
+ T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
+};
+
+#define IS_TIMER1(id) (id & 0x2)
+#define IS_TIMER0(id) (!IS_TIMER1(id))
+#define IS_TIMER_TOP(id) ((id & 0x1))
+#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
+
+static int timer_irqs[NUM_TIMERS] = {
+ IRQ_TINT0_TINT12,
+ IRQ_TINT0_TINT34,
+ IRQ_TINT1_TINT12,
+ IRQ_TINT1_TINT34,
+};
+
+/*
+ * This driver configures the 2 64-bit count-up timers as 4 independent
+ * 32-bit count-up timers used as follows:
+ *
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+#define TID_CLOCKEVENT T0_BOT
+#define TID_CLOCKSOURCE T0_TOP
+
+/* Timer register offsets */
+#define PID12 0x0
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define WDTCR 0x28
+
+/* Timer register bitfields */
+#define TCR_ENAMODE_DISABLE 0x0
+#define TCR_ENAMODE_ONESHOT 0x1
+#define TCR_ENAMODE_PERIODIC 0x2
+#define TCR_ENAMODE_MASK 0x3
+
+#define TGCR_TIMMODE_SHIFT 2
+#define TGCR_TIMMODE_64BIT_GP 0x0
+#define TGCR_TIMMODE_32BIT_UNCHAINED 0x1
+#define TGCR_TIMMODE_64BIT_WDOG 0x2
+#define TGCR_TIMMODE_32BIT_CHAINED 0x3
+
+#define TGCR_TIM12RS_SHIFT 0
+#define TGCR_TIM34RS_SHIFT 1
+#define TGCR_RESET 0x0
+#define TGCR_UNRESET 0x1
+#define TGCR_RESET_MASK 0x3
+
+#define WDTCR_WDEN_SHIFT 14
+#define WDTCR_WDEN_DISABLE 0x0
+#define WDTCR_WDEN_ENABLE 0x1
+#define WDTCR_WDKEY_SHIFT 16
+#define WDTCR_WDKEY_SEQ0 0xa5c6
+#define WDTCR_WDKEY_SEQ1 0xda7e
+
+struct timer_s {
+ char *name;
+ unsigned int id;
+ unsigned long period;
+ unsigned long opts;
+ unsigned long reg_base;
+ unsigned long tim_reg;
+ unsigned long prd_reg;
+ unsigned long enamode_shift;
+ struct irqaction irqaction;
+};
+static struct timer_s timers[];
+
+/* values for 'opts' field of struct timer_s */
+#define TIMER_OPTS_DISABLED 0x00
+#define TIMER_OPTS_ONESHOT 0x01
+#define TIMER_OPTS_PERIODIC 0x02
+
+static int timer32_config(struct timer_s *t)
+{
+ u32 tcr = davinci_readl(t->reg_base + TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+ davinci_writel(tcr, t->reg_base + TCR);
+
+ /* reset counter to zero, set new period */
+ davinci_writel(0, t->tim_reg);
+ davinci_writel(t->period, t->prd_reg);
+
+ /* Set enable mode */
+ if (t->opts & TIMER_OPTS_ONESHOT) {
+ tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+ } else if (t->opts & TIMER_OPTS_PERIODIC) {
+ tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+ }
+
+ davinci_writel(tcr, t->reg_base + TCR);
+ return 0;
+}
+
+static inline u32 timer32_read(struct timer_s *t)
+{
+ return davinci_readl(t->tim_reg);
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_davinci;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+/* called when 32-bit counter wraps */
+static irqreturn_t freerun_interrupt(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static struct timer_s timers[] = {
+ [TID_CLOCKEVENT] = {
+ .name = "clockevent",
+ .opts = TIMER_OPTS_DISABLED,
+ .irqaction = {
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = timer_interrupt,
+ }
+ },
+ [TID_CLOCKSOURCE] = {
+ .name = "free-run counter",
+ .period = ~0,
+ .opts = TIMER_OPTS_PERIODIC,
+ .irqaction = {
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = freerun_interrupt,
+ }
+ },
+};
+
+static void __init timer_init(void)
+{
+ u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ int i;
+
+ /* Global init of each 64-bit timer as a whole */
+ for(i=0; i<2; i++) {
+ u32 tgcr, base = bases[i];
+
+ /* Disabled, Internal clock source */
+ davinci_writel(0, base + TCR);
+
+ /* reset both timers, no pre-scaler for timer34 */
+ tgcr = 0;
+ davinci_writel(tgcr, base + TGCR);
+
+ /* Set both timers to unchained 32-bit */
+ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
+ davinci_writel(tgcr, base + TGCR);
+
+ /* Unreset timers */
+ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
+ (TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
+ davinci_writel(tgcr, base + TGCR);
+
+ /* Init both counters to zero */
+ davinci_writel(0, base + TIM12);
+ davinci_writel(0, base + TIM34);
+ }
+
+ /* Init of each timer as a 32-bit timer */
+ for (i=0; i< ARRAY_SIZE(timers); i++) {
+ struct timer_s *t = &timers[i];
+
+ if (t->name) {
+ t->id = i;
+ t->reg_base = (IS_TIMER1(t->id) ?
+ DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+
+ if (IS_TIMER_BOT(t->id)) {
+ t->enamode_shift = 6;
+ t->tim_reg = t->reg_base + TIM12;
+ t->prd_reg = t->reg_base + PRD12;
+ } else {
+ t->enamode_shift = 22;
+ t->tim_reg = t->reg_base + TIM34;
+ t->prd_reg = t->reg_base + PRD34;
+ }
+
+ /* Register interrupt */
+ t->irqaction.name = t->name;
+ t->irqaction.dev_id = (void *)t;
+ if (t->irqaction.handler != NULL) {
+ setup_irq(timer_irqs[t->id], &t->irqaction);
+ }
+
+ timer32_config(&timers[i]);
+ }
+ }
+}
+
+/*
+ * clocksource
+ */
+static cycle_t read_cycles(void)
+{
+ struct timer_s *t = &timers[TID_CLOCKSOURCE];
+
+ return (cycles_t)timer32_read(t);
+}
+
+static struct clocksource clocksource_davinci = {
+ .name = "timer0_1",
+ .rating = 300,
+ .read = read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * clockevent
+ */
+static int davinci_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+ t->period = cycles;
+ timer32_config(t);
+ return 0;
+}
+
+static void davinci_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct timer_s *t = &timers[TID_CLOCKEVENT];
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ t->period = CLOCK_TICK_RATE / (HZ);
+ t->opts = TIMER_OPTS_PERIODIC;
+ timer32_config(t);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ t->opts = TIMER_OPTS_ONESHOT;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ t->opts = TIMER_OPTS_DISABLED;
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_davinci = {
+ .name = "timer0_0",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_next_event = davinci_set_next_event,
+ .set_mode = davinci_set_mode,
+};
+
+
+static void __init davinci_timer_init(void)
+{
+ static char err[] __initdata = KERN_ERR
+ "%s: can't register clocksource!\n";
+
+ /* init timer hw */
+ timer_init();
+
+ /* setup clocksource */
+ clocksource_davinci.mult =
+ clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_davinci.shift);
+ if (clocksource_register(&clocksource_davinci))
+ printk(err, clocksource_davinci.name);
+
+ /* setup clockevent */
+ clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.shift);
+ clockevent_davinci.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
+ clockevent_davinci.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_davinci);
+
+ clockevent_davinci.cpumask = cpumask_of_cpu(0);
+ clockevents_register_device(&clockevent_davinci);
+}
+
+struct sys_timer davinci_timer = {
+ .init = davinci_timer_init,
+};
+
+
+/* reset board using watchdog timer */
+void davinci_watchdog_reset(void) {
+ u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+
+ /* disable, internal clock source */
+ davinci_writel(0, base + TCR);
+
+ /* reset timer, set mode to 64-bit watchdog, and unreset */
+ tgcr = 0;
+ davinci_writel(tgcr, base + TCR);
+ tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
+ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
+ (TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
+ davinci_writel(tgcr, base + TCR);
+
+ /* clear counter and period regs */
+ davinci_writel(0, base + TIM12);
+ davinci_writel(0, base + TIM34);
+ davinci_writel(0, base + PRD12);
+ davinci_writel(0, base + PRD34);
+
+ /* enable */
+ wdtcr = davinci_readl(base + WDTCR);
+ wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
+ davinci_writel(wdtcr, base + WDTCR);
+
+ /* put watchdog in pre-active state */
+ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
+ (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
+ davinci_writel(wdtcr, base + WDTCR);
+
+ /* put watchdog in active state */
+ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
+ (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
+ davinci_writel(wdtcr, base + WDTCR);
+
+ /* write an invalid value to the WDKEY field to trigger
+ * a watchdog reset */
+ wdtcr = 0x00004000;
+ davinci_writel(wdtcr, base + WDTCR);
+}
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index bbf0d33..6b2380e 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -102,7 +102,7 @@
EXPORT_SYMBOL(__readw);
EXPORT_SYMBOL(__readl);
-void readsw(void __iomem *addr, void *data, int len)
+void readsw(const void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
@@ -112,7 +112,7 @@
}
EXPORT_SYMBOL(readsw);
-void readsl(void __iomem *addr, void *data, int len)
+void readsl(const void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
@@ -157,7 +157,7 @@
EXPORT_SYMBOL(__writew);
EXPORT_SYMBOL(__writel);
-void writesw(void __iomem *addr, void *data, int len)
+void writesw(void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
@@ -167,7 +167,7 @@
}
EXPORT_SYMBOL(writesw);
-void writesl(void __iomem *addr, void *data, int len)
+void writesl(void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
index da1609d..cad015f 100644
--- a/arch/arm/mach-iop13xx/Makefile
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -10,3 +10,4 @@
obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
+obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index b2eb0b9..5791add 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
+#include <asm/arch/msi.h>
/* INTCTL0 CP6 R0 Page 4
*/
@@ -258,7 +259,7 @@
write_intbase(INTBASE);
write_intsize(INTSIZE_4);
- for(i = 0; i < NR_IOP13XX_IRQS; i++) {
+ for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
if (i < 32)
set_irq_chip(i, &iop13xx_irqchip1);
else if (i < 64)
@@ -271,4 +272,6 @@
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
+
+ iop13xx_msi_init();
}
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
new file mode 100644
index 0000000..2d23693
--- /dev/null
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -0,0 +1,194 @@
+/*
+ * arch/arm/mach-iop13xx/msi.c
+ *
+ * PCI MSI support for the iop13xx processor
+ *
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/pci.h>
+#include <linux/msi.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+
+#define IOP13XX_NUM_MSI_IRQS 128
+static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+
+/* IMIPR0 CP6 R8 Page 1
+ */
+static inline u32 read_imipr_0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
+}
+
+/* IMIPR1 CP6 R9 Page 1
+ */
+static inline u32 read_imipr_1(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
+}
+
+/* IMIPR2 CP6 R10 Page 1
+ */
+static inline u32 read_imipr_2(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_2(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
+}
+
+/* IMIPR3 CP6 R11 Page 1
+ */
+static inline u32 read_imipr_3(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
+ return val;
+}
+static inline void write_imipr_3(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
+}
+
+static u32 (*read_imipr[])(void) = {
+ read_imipr_0,
+ read_imipr_1,
+ read_imipr_2,
+ read_imipr_3,
+};
+
+static void (*write_imipr[])(u32) = {
+ write_imipr_0,
+ write_imipr_1,
+ write_imipr_2,
+ write_imipr_3,
+};
+
+static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int i, j;
+ unsigned long status;
+
+ /* read IMIPR registers and find any active interrupts,
+ * then call ISR for each active interrupt
+ */
+ for (i = 0; i < ARRAY_SIZE(read_imipr); i++) {
+ status = (read_imipr[i])();
+ if (!status)
+ continue;
+
+ do {
+ j = find_first_bit(&status, 32);
+ (write_imipr[i])(1 << j); /* write back to clear bit */
+ desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
+ desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i), desc);
+ status = (read_imipr[i])();
+ } while (status);
+ }
+}
+
+void __init iop13xx_msi_init(void)
+{
+ set_irq_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
+}
+
+/*
+ * Dynamic irq allocate and deallocation
+ */
+int create_irq(void)
+{
+ int irq, pos;
+
+again:
+ pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
+ irq = IRQ_IOP13XX_MSI_0 + pos;
+ if (irq > NR_IRQS)
+ return -ENOSPC;
+ /* test_and_set_bit operates on 32-bits at a time */
+ if (test_and_set_bit(pos, msi_irq_in_use))
+ goto again;
+
+ dynamic_irq_init(irq);
+
+ return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+ int pos = irq - IRQ_IOP13XX_MSI_0;
+
+ dynamic_irq_cleanup(irq);
+
+ clear_bit(pos, msi_irq_in_use);
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+ destroy_irq(irq);
+}
+
+static void iop13xx_msi_nop(unsigned int irq)
+{
+ return;
+}
+
+static struct irq_chip iop13xx_msi_chip = {
+ .name = "PCI-MSI",
+ .ack = iop13xx_msi_nop,
+ .enable = unmask_msi_irq,
+ .disable = mask_msi_irq,
+ .mask = mask_msi_irq,
+ .unmask = unmask_msi_irq,
+};
+
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+{
+ int id, irq = create_irq();
+ struct msi_msg msg;
+
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, desc);
+
+ msg.address_hi = 0x0;
+ msg.address_lo = IOP13XX_MU_MIMR_PCI;
+
+ id = iop13xx_cpu_id();
+ msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f);
+
+ write_msi_msg(irq, &msg);
+ set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
+
+ return irq;
+}
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index d1d0d32..1c9e94c 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -559,6 +559,14 @@
int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
u32 reg_val;
+#ifdef CONFIG_PCI_MSI
+ /* BAR 0 (inbound msi window) */
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+ __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
+ __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
+#endif
+
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
@@ -720,6 +728,14 @@
else
atux_trhfa_timeout = jiffies;
+#ifdef CONFIG_PCI_MSI
+ /* BAR 0 (inbound msi window) */
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+ __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
+ __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
+ __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
+#endif
+
/* BAR 1 (1:1 mapping with Physical RAM) */
/* Set limit and enable */
__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
new file mode 100644
index 0000000..ce1cf8d
--- /dev/null
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -0,0 +1,13 @@
+if ARCH_KS8695
+
+menu "Kendin/Micrel KS8695 Implementations"
+
+config MACH_KS8695
+ bool "KS8695 development board"
+ help
+ Say 'Y' here if you want your kernel to run on the original
+ Kendin-Micrel KS8695 development board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
new file mode 100644
index 0000000..56b7d33
--- /dev/null
+++ b/arch/arm/mach-ks8695/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-ks8695/Makefile
+#
+# Makefile for KS8695 architecture support
+#
+
+obj-y := cpu.o irq.o time.o devices.o
+obj-m :=
+obj-n :=
+obj- :=
+
+# PCI support is optional
+#obj-$(CONFIG_PCI) += pci.o
+
+# Board-specific support
+obj-$(CONFIG_MACH_KS8695) += board-micrel.o
diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot
new file mode 100644
index 0000000..48eb2cb
--- /dev/null
+++ b/arch/arm/mach-ks8695/Makefile.boot
@@ -0,0 +1,8 @@
+# Note: the following conditions must always be true:
+# ZRELADDR == virt_to_phys(TEXTADDR)
+# PARAMS_PHYS must be within 4MB of ZRELADDR
+# INITRD_PHYS must be in RAM
+
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
new file mode 100644
index 0000000..8fc0edb
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ks8695/board-micrel.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/devices.h>
+
+#include "generic.h"
+
+#ifdef CONFIG_PCI
+static int __init micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return KS8695_IRQ_EXTERN0;
+}
+
+static struct ks8695_pci_cfg micrel_pci = {
+ .mode = KS8695_MODE_MINIPCI,
+ .map_irq = micrel_pci_map_irq,
+};
+#endif
+
+
+static void micrel_init(void)
+{
+ printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
+
+#ifdef CONFIG_PCI
+ ks8695_init_pci(&micrel_pci);
+#endif
+
+ /* Add devices */
+ ks8695_add_device_wan(); /* eth0 = WAN */
+ ks8695_add_device_lan(); /* eth1 = LAN */
+}
+
+MACHINE_START(KS8695, "KS8695 Centaur Development Board")
+ /* Maintainer: Micrel Semiconductor Inc. */
+ .phys_io = KS8695_IO_PA,
+ .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc,
+ .boot_params = KS8695_SDRAM_PA + 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = micrel_init,
+ .timer = &ks8695_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
new file mode 100644
index 0000000..407d255
--- /dev/null
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ks8695/cpu.c
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-sys.h>
+#include <asm/arch/regs-misc.h>
+
+
+static struct __initdata map_desc ks8695_io_desc[] = {
+ {
+ .virtual = KS8695_IO_VA,
+ .pfn = __phys_to_pfn(KS8695_IO_PA),
+ .length = KS8695_IO_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static void __init ks8695_processor_info(void)
+{
+ unsigned long id, rev;
+
+ id = __raw_readl(KS8695_MISC_VA + KS8695_DID);
+ rev = __raw_readl(KS8695_MISC_VA + KS8695_RID);
+
+ printk("KS8695 ID=%04lx SubID=%02lx Revision=%02lx\n", (id & DID_ID), (rev & RID_SUBID), (rev & RID_REVISION));
+}
+
+static unsigned int sysclk[8] = { 125000000, 100000000, 62500000, 50000000, 41700000, 33300000, 31300000, 25000000 };
+static unsigned int cpuclk[8] = { 166000000, 166000000, 83000000, 83000000, 55300000, 55300000, 41500000, 41500000 };
+
+static void __init ks8695_clock_info(void)
+{
+ unsigned int scdc = __raw_readl(KS8695_SYS_VA + KS8695_CLKCON) & CLKCON_SCDC;
+
+ printk("Clocks: System %u MHz, CPU %u MHz\n",
+ sysclk[scdc] / 1000000, cpuclk[scdc] / 1000000);
+}
+
+void __init ks8695_map_io(void)
+{
+ iotable_init(ks8695_io_desc, ARRAY_SIZE(ks8695_io_desc));
+
+ ks8695_processor_info();
+ ks8695_clock_info();
+}
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
new file mode 100644
index 0000000..386593f8
--- /dev/null
+++ b/arch/arm/mach-ks8695/devices.c
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-ks8695/devices.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/regs-wan.h>
+#include <asm/arch/regs-lan.h>
+#include <asm/arch/regs-hpna.h>
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ARM_KS8695_ETHER) || defined(CONFIG_ARM_KS8695_ETHER_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+
+static struct resource ks8695_wan_resources[] = {
+ [0] = {
+ .start = KS8695_WAN_VA,
+ .end = KS8695_WAN_VA + 0x00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "WAN RX",
+ .start = KS8695_IRQ_WAN_RX_STATUS,
+ .end = KS8695_IRQ_WAN_RX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "WAN TX",
+ .start = KS8695_IRQ_WAN_TX_STATUS,
+ .end = KS8695_IRQ_WAN_TX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .name = "WAN Link",
+ .start = KS8695_IRQ_WAN_LINK,
+ .end = KS8695_IRQ_WAN_LINK,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ks8695_wan_device = {
+ .name = "ks8695_ether",
+ .id = 0,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = ks8695_wan_resources,
+ .num_resources = ARRAY_SIZE(ks8695_wan_resources),
+};
+
+
+static struct resource ks8695_lan_resources[] = {
+ [0] = {
+ .start = KS8695_LAN_VA,
+ .end = KS8695_LAN_VA + 0x00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "LAN RX",
+ .start = KS8695_IRQ_LAN_RX_STATUS,
+ .end = KS8695_IRQ_LAN_RX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "LAN TX",
+ .start = KS8695_IRQ_LAN_TX_STATUS,
+ .end = KS8695_IRQ_LAN_TX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ks8695_lan_device = {
+ .name = "ks8695_ether",
+ .id = 1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = ks8695_lan_resources,
+ .num_resources = ARRAY_SIZE(ks8695_lan_resources),
+};
+
+
+static struct resource ks8695_hpna_resources[] = {
+ [0] = {
+ .start = KS8695_HPNA_VA,
+ .end = KS8695_HPNA_VA + 0x00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "HPNA RX",
+ .start = KS8695_IRQ_HPNA_RX_STATUS,
+ .end = KS8695_IRQ_HPNA_RX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "HPNA TX",
+ .start = KS8695_IRQ_HPNA_TX_STATUS,
+ .end = KS8695_IRQ_HPNA_TX_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ks8695_hpna_device = {
+ .name = "ks8695_ether",
+ .id = 2,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = ks8695_hpna_resources,
+ .num_resources = ARRAY_SIZE(ks8695_hpna_resources),
+};
+
+void __init ks8695_add_device_wan(void)
+{
+ platform_device_register(&ks8695_wan_device);
+}
+
+void __init ks8695_add_device_lan(void)
+{
+ platform_device_register(&ks8695_lan_device);
+}
+
+void __init ks8696_add_device_hpna(void)
+{
+ platform_device_register(&ks8695_hpna_device);
+}
+#else
+void __init ks8695_add_device_wan(void) {}
+void __init ks8695_add_device_lan(void) {}
+void __init ks8696_add_device_hpna(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_KS8695_WATCHDOG) || defined(CONFIG_KS8695_WATCHDOG_MODULE)
+static struct platform_device ks8695_wdt_device = {
+ .name = "ks8695_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init ks8695_add_device_watchdog(void)
+{
+ platform_device_register(&ks8695_wdt_device);
+}
+#else
+static void __init ks8695_add_device_watchdog(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init ks8695_add_standard_devices(void)
+{
+ ks8695_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(ks8695_add_standard_devices);
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
new file mode 100644
index 0000000..2fbfab8
--- /dev/null
+++ b/arch/arm/mach-ks8695/generic.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ks8695/generic.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+*/
+
+extern __init void ks8695_map_io(void);
+extern __init void ks8695_init_irq(void);
+extern struct sys_timer ks8695_timer;
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
new file mode 100644
index 0000000..2407bba
--- /dev/null
+++ b/arch/arm/mach-ks8695/irq.c
@@ -0,0 +1,175 @@
+/*
+ * arch/arm/mach-ks8695/irq.c
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+static void ks8695_irq_mask(unsigned int irqno)
+{
+ unsigned long inten;
+
+ inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
+ inten &= ~(1 << irqno);
+
+ __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
+}
+
+static void ks8695_irq_unmask(unsigned int irqno)
+{
+ unsigned long inten;
+
+ inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
+ inten |= (1 << irqno);
+
+ __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
+}
+
+static void ks8695_irq_ack(unsigned int irqno)
+{
+ __raw_writel((1 << irqno), KS8695_IRQ_VA + KS8695_INTST);
+}
+
+
+static struct irq_chip ks8695_irq_level_chip;
+static struct irq_chip ks8695_irq_edge_chip;
+
+
+static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
+{
+ unsigned long ctrl, mode;
+ unsigned short level_triggered = 0;
+
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+
+ switch (type) {
+ case IRQT_HIGH:
+ mode = IOPC_TM_HIGH;
+ level_triggered = 1;
+ break;
+ case IRQT_LOW:
+ mode = IOPC_TM_LOW;
+ level_triggered = 1;
+ break;
+ case IRQT_RISING:
+ mode = IOPC_TM_RISING;
+ break;
+ case IRQT_FALLING:
+ mode = IOPC_TM_FALLING;
+ break;
+ case IRQT_BOTHEDGE:
+ mode = IOPC_TM_EDGE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (irqno) {
+ case KS8695_IRQ_EXTERN0:
+ ctrl &= ~IOPC_IOEINT0TM;
+ ctrl |= IOPC_IOEINT0_MODE(mode);
+ break;
+ case KS8695_IRQ_EXTERN1:
+ ctrl &= ~IOPC_IOEINT1TM;
+ ctrl |= IOPC_IOEINT1_MODE(mode);
+ break;
+ case KS8695_IRQ_EXTERN2:
+ ctrl &= ~IOPC_IOEINT2TM;
+ ctrl |= IOPC_IOEINT2_MODE(mode);
+ break;
+ case KS8695_IRQ_EXTERN3:
+ ctrl &= ~IOPC_IOEINT3TM;
+ ctrl |= IOPC_IOEINT3_MODE(mode);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (level_triggered) {
+ set_irq_chip(irqno, &ks8695_irq_level_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ }
+ else {
+ set_irq_chip(irqno, &ks8695_irq_edge_chip);
+ set_irq_handler(irqno, handle_edge_irq);
+ }
+
+ __raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC);
+ return 0;
+}
+
+static struct irq_chip ks8695_irq_level_chip = {
+ .ack = ks8695_irq_mask,
+ .mask = ks8695_irq_mask,
+ .unmask = ks8695_irq_unmask,
+ .set_type = ks8695_irq_set_type,
+};
+
+static struct irq_chip ks8695_irq_edge_chip = {
+ .ack = ks8695_irq_ack,
+ .mask = ks8695_irq_mask,
+ .unmask = ks8695_irq_unmask,
+ .set_type = ks8695_irq_set_type,
+};
+
+void __init ks8695_init_irq(void)
+{
+ unsigned int irq;
+
+ /* Disable all interrupts initially */
+ __raw_writel(0, KS8695_IRQ_VA + KS8695_INTMC);
+ __raw_writel(0, KS8695_IRQ_VA + KS8695_INTEN);
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ switch (irq) {
+ /* Level-triggered interrupts */
+ case KS8695_IRQ_BUS_ERROR:
+ case KS8695_IRQ_UART_MODEM_STATUS:
+ case KS8695_IRQ_UART_LINE_STATUS:
+ case KS8695_IRQ_UART_RX:
+ case KS8695_IRQ_COMM_TX:
+ case KS8695_IRQ_COMM_RX:
+ set_irq_chip(irq, &ks8695_irq_level_chip);
+ set_irq_handler(irq, handle_level_irq);
+ break;
+
+ /* Edge-triggered interrupts */
+ default:
+ ks8695_irq_ack(irq); /* clear pending bit */
+ set_irq_chip(irq, &ks8695_irq_edge_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ }
+
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
new file mode 100644
index 0000000..d2c86e4
--- /dev/null
+++ b/arch/arm/mach-ks8695/time.c
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-ks8695/time.c
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/regs-timer.h>
+#include <asm/arch/regs-irq.h>
+
+#include "generic.h"
+
+/*
+ * Returns number of ms since last clock interrupt. Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long ks8695_gettimeoffset (void)
+{
+ unsigned long elapsed, tick2, intpending;
+
+ /*
+ * Get the current number of ticks. Note that there is a race
+ * condition between us reading the timer and checking for an
+ * interrupt. We solve this by ensuring that the counter has not
+ * reloaded between our two reads.
+ */
+ elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
+ do {
+ tick2 = elapsed;
+ intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
+ elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
+ } while (elapsed > tick2);
+
+ /* Convert to number of ticks expired (not remaining) */
+ elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
+
+ /* Is interrupt pending? If so, then timer has been reloaded already. */
+ if (intpending)
+ elapsed += (CLOCK_TICK_RATE / HZ);
+
+ /* Convert ticks to usecs */
+ return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
+{
+ write_seqlock(&xtime_lock);
+ timer_tick();
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ks8695_timer_irq = {
+ .name = "ks8695_tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = ks8695_timer_interrupt,
+};
+
+static void ks8695_timer_setup(void)
+{
+ unsigned long tmout = CLOCK_TICK_RATE / HZ;
+ unsigned long tmcon;
+
+ /* disable timer1 */
+ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
+ __raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
+
+ /* re-enable timer1 */
+ __raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+static void __init ks8695_timer_init (void)
+{
+ ks8695_timer_setup();
+
+ /* Enable timer interrupts */
+ setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
+}
+
+struct sys_timer ks8695_timer = {
+ .init = ks8695_timer_init,
+ .offset = ks8695_gettimeoffset,
+ .resume = ks8695_timer_setup,
+};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index ad51939..48c8c91 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -326,7 +326,7 @@
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel h2_config[] = {
+static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_USB, &h2_usb_config },
{ OMAP_TAG_MMC, &h2_mmc_config },
{ OMAP_TAG_UART, &h2_uart_config },
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 6f4ea4b..8caee68 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -1,4 +1,3 @@
-//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
/*
* linux/arch/arm/mach-omap1/pm.c
*
@@ -377,7 +376,7 @@
* Jump to assembly code. The processor will stay there
* until wake up.
*/
- omap_sram_suspend(arg0, arg1);
+ omap_sram_suspend(arg0, arg1);
/*
* If we are here, processor is woken up!
@@ -631,10 +630,6 @@
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
default:
return -EINVAL;
}
@@ -657,10 +652,6 @@
case PM_SUSPEND_MEM:
omap_pm_suspend();
break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
default:
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 54c836a9..e290b98 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -54,7 +54,7 @@
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
-static spinlock_t gpmc_mem_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned gpmc_cs_map;
static void __iomem *gpmc_base =
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f538d0f..0439906 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -43,7 +43,7 @@
/* 24xx I2C */
MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1)
MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 0, 1)
+MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1)
MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
@@ -52,7 +52,9 @@
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
-/* 24xx GPMC wait pin monitoring */
+/* 24xx GPMC chipselects, wait pin monitoring */
+MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1)
+MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1)
MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1)
MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1)
MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1)
@@ -66,6 +68,7 @@
/* 24xx GPIO */
MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
+MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
@@ -75,7 +78,9 @@
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
+MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
+MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1)
/* 242x DBG GPIO */
MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1)
@@ -118,6 +123,30 @@
MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
+/* Full speed USB */
+MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1)
+MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1)
+MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1)
+MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1)
+MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1)
+MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1)
+MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1)
+
+MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1)
+MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1)
+MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1)
+MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1)
+MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1)
+MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1)
+MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1)
+MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1)
+
+MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1)
+MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1)
+MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1)
+MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1)
+MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1)
+
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index d6a279e..f7009d8 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -47,7 +47,7 @@
int count;
} ll_pool;
-static spinlock_t ll_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(ll_lock);
struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
{
@@ -135,7 +135,7 @@
}
}
-static spinlock_t dma_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(dma_lock);
static inline void pnx4008_dma_lock(void)
{
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 119c64b..28c79bd 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/serial_8250.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <asm/types.h>
@@ -55,23 +56,31 @@
static struct mtd_partition trizeps4_partitions[] = {
{
.name = "Bootloader",
+ .offset = 0x00000000,
.size = 0x00040000,
- .offset = 0,
.mask_flags = MTD_WRITEABLE /* force read-only */
},{
- .name = "Kernel",
- .size = 0x00400000,
- .offset = 0x00040000
+ .name = "Backup",
+ .offset = 0x00040000,
+ .size = 0x00040000,
},{
- .name = "Filesystem",
+ .name = "Image",
+ .offset = 0x00080000,
+ .size = 0x01080000,
+ },{
+ .name = "IPSM",
+ .offset = 0x01100000,
+ .size = 0x00e00000,
+ },{
+ .name = "Registry",
+ .offset = 0x01f00000,
.size = MTDPART_SIZ_FULL,
- .offset = 0x00440000
}
};
-static struct flash_platform_data trizeps4_flash_data[] = {
+static struct physmap_flash_data trizeps4_flash_data[] = {
{
- .map_name = "cfi_probe",
+ .width = 4, /* bankwidth in bytes */
.parts = trizeps4_partitions,
.nr_parts = ARRAY_SIZE(trizeps4_partitions)
}
@@ -79,15 +88,15 @@
static struct resource flash_resource = {
.start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device flash_device = {
- .name = "pxa2xx-flash",
+ .name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &trizeps4_flash_data,
+ .platform_data = trizeps4_flash_data,
},
.resource = &flash_resource,
.num_resources = 1,
@@ -393,11 +402,37 @@
.pxafb_backlight_power = board_backlight_power,
};
+static struct pxafb_mode_info toshiba_lcd_mode = {
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 63,
+ .left_margin = 12,
+ .right_margin = 12,
+ .vsync_len = 4,
+ .upper_margin = 32,
+ .lower_margin = 10,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info toshiba_lcd = {
+ .modes = &toshiba_lcd_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lccr0 = LCCR0_Color | LCCR0_Act,
+ .lccr3 = 0x03400002,
+ .pxafb_backlight_power = board_backlight_power,
+};
+
static void __init trizeps4_init(void)
{
platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
- set_pxa_fb_info(&sharp_lcd);
+/* set_pxa_fb_info(&sharp_lcd); */
+ set_pxa_fb_info(&toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
@@ -436,9 +471,10 @@
/* whats that for ??? */
pxa_gpio_mode(GPIO79_nCS_3_MD);
+#ifdef CONFIG_LEDS
pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
-
+#endif
#ifdef CONFIG_MACH_TRIZEPS4_CONXS
#ifdef CONFIG_IDE_PXA_CF
/* if boot direct from compact flash dont disable power */
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 9a3d3d2..3e7a855 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -20,7 +20,7 @@
# Machine support
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o
obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
new file mode 100644
index 0000000..3c48886
--- /dev/null
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -0,0 +1,142 @@
+/*
+ * arch/arm/mach-s3c2410/h1940-bluetooth.c
+ * Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * S3C2410 bluetooth "driver"
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/hardware.h>
+#include <asm/arch/h1940-latch.h>
+
+#define DRV_NAME "h1940-bt"
+
+#ifdef CONFIG_LEDS_H1940
+DEFINE_LED_TRIGGER(bt_led_trigger);
+#endif
+
+static int state;
+
+/* Bluetooth control */
+static void h1940bt_enable(int on)
+{
+ if (on) {
+#ifdef CONFIG_LEDS_H1940
+ /* flashing Blue */
+ led_trigger_event(bt_led_trigger, LED_HALF);
+#endif
+
+ /* Power on the chip */
+ h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
+ /* Reset the chip */
+ mdelay(10);
+ s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ mdelay(10);
+ s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+
+ state = 1;
+ }
+ else {
+#ifdef CONFIG_LEDS_H1940
+ led_trigger_event(bt_led_trigger, 0);
+#endif
+
+ s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ mdelay(10);
+ s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ mdelay(10);
+ h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
+
+ state = 0;
+ }
+}
+
+static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", state);
+}
+
+static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ int new_state;
+ char *endp;
+
+ new_state = simple_strtoul(buf, &endp, 0);
+ if (*endp && !isspace(*endp))
+ return -EINVAL;
+
+ h1940bt_enable(new_state);
+
+ return count;
+}
+static DEVICE_ATTR(enable, 0644,
+ h1940bt_show,
+ h1940bt_store);
+
+static int __init h1940bt_probe(struct platform_device *pdev)
+{
+ /* Configures BT serial port GPIOs */
+ s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
+ s3c2410_gpio_pullup(S3C2410_GPH0, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
+ s3c2410_gpio_pullup(S3C2410_GPH1, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH2, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+
+#ifdef CONFIG_LEDS_H1940
+ led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
+#endif
+
+ /* disable BT by default */
+ h1940bt_enable(0);
+
+ return device_create_file(&pdev->dev, &dev_attr_enable);
+}
+
+static int h1940bt_remove(struct platform_device *pdev)
+{
+#ifdef CONFIG_LEDS_H1940
+ led_trigger_unregister_simple(bt_led_trigger);
+#endif
+ return 0;
+}
+
+
+static struct platform_driver h1940bt_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = h1940bt_probe,
+ .remove = h1940bt_remove,
+};
+
+
+static int __init h1940bt_init(void)
+{
+ return platform_driver_register(&h1940bt_driver);
+}
+
+static void __exit h1940bt_exit(void)
+{
+ platform_driver_unregister(&h1940bt_driver);
+}
+
+module_init(h1940bt_init);
+module_exit(h1940bt_exit);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 5d5f00e..5ccd0be 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -177,6 +177,11 @@
.id = -1,
};
+static struct platform_device s3c_device_bluetooth = {
+ .name = "h1940-bt",
+ .id = -1,
+};
+
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -185,6 +190,7 @@
&s3c_device_iis,
&s3c_device_usbgadget,
&s3c_device_leds,
+ &s3c_device_bluetooth,
};
static void __init h1940_map_io(void)
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index dd2272f..0b6e360 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -791,6 +791,10 @@
.name = "usb-bus-host",
.id = -1,
.parent = &clk_usb_bus_host,
+ }, { .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C2443_PCLKCON_AC97,
}
};
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b81391a..15f0284 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -131,8 +131,8 @@
# ARM922T
config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
- depends on ARCH_LH7A40X || ARCH_INTEGRATOR
- default y if ARCH_LH7A40X
+ depends on ARCH_LH7A40X || ARCH_INTEGRATOR || ARCH_KS8695
+ default y if ARCH_LH7A40X || ARCH_KS8695
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
@@ -143,7 +143,7 @@
help
The ARM922T is a version of the ARM920T, but with smaller
instruction and data caches. It is used in Altera's
- Excalibur XA device family.
+ Excalibur XA device family and Micrel's KS8695 Centaur.
Say Y if you want support for the ARM922T processor.
Otherwise, say N.
@@ -171,8 +171,8 @@
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2d86b10..55a4d3b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -747,7 +747,7 @@
*/
dma_addr_t omap_get_dma_src_pos(int lch)
{
- dma_addr_t offset;
+ dma_addr_t offset = 0;
if (cpu_class_is_omap1())
offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
@@ -769,7 +769,7 @@
*/
dma_addr_t omap_get_dma_dst_pos(int lch)
{
- dma_addr_t offset;
+ dma_addr_t offset = 0;
if (cpu_class_is_omap1())
offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6c798d2..75211f2 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -83,10 +83,21 @@
reg |= OMAP24XX_PULL_ENA;
if(cfg->pu_pd_val)
reg |= OMAP24XX_PULL_UP;
-#ifdef CONFIG_OMAP_MUX_DEBUG
- printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
- cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
- omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+ {
+ u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
+ u8 debug = 0;
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+ debug = cfg->debug;
+#endif
+ warn = (orig != reg);
+ if (debug || warn)
+ printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+ cfg->name,
+ OMAP24XX_L4_BASE + cfg->mux_reg,
+ orig, reg);
+ }
#endif
omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index b1142ce..0a9a5e7 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Apr 16 21:01:04 2007
+# Last update: Fri May 11 19:53:41 2007
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1335,3 +1335,35 @@
comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327
sbc2410x MACH_SBC2410X SBC2410X 1328
at4x0bd MACH_AT4X0BD AT4X0BD 1329
+cbifr MACH_CBIFR CBIFR 1330
+arcom_quantum MACH_ARCOM_QUANTUM ARCOM_QUANTUM 1331
+matrix520 MACH_MATRIX520 MATRIX520 1332
+matrix510 MACH_MATRIX510 MATRIX510 1333
+matrix500 MACH_MATRIX500 MATRIX500 1334
+m501 MACH_M501 M501 1335
+aaeon1270 MACH_AAEON1270 AAEON1270 1336
+matrix500ev MACH_MATRIX500EV MATRIX500EV 1337
+pac500 MACH_PAC500 PAC500 1338
+pnx8181 MACH_PNX8181 PNX8181 1339
+colibri320 MACH_COLIBRI320 COLIBRI320 1340
+aztoolbb MACH_AZTOOLBB AZTOOLBB 1341
+aztoolg2 MACH_AZTOOLG2 AZTOOLG2 1342
+dvlhost MACH_DVLHOST DVLHOST 1343
+zir9200 MACH_ZIR9200 ZIR9200 1344
+zir9260 MACH_ZIR9260 ZIR9260 1345
+cocopah MACH_COCOPAH COCOPAH 1346
+nds MACH_NDS NDS 1347
+rosencrantz MACH_ROSENCRANTZ ROSENCRANTZ 1348
+fttx_odsc MACH_FTTX_ODSC FTTX_ODSC 1349
+classe_r6904 MACH_CLASSE_R6904 CLASSE_R6904 1350
+cam60 MACH_CAM60 CAM60 1351
+mxc30031ads MACH_MXC30031ADS MXC30031ADS 1352
+datacall MACH_DATACALL DATACALL 1353
+at91eb01 MACH_AT91EB01 AT91EB01 1354
+rty MACH_RTY RTY 1355
+dwl2100 MACH_DWL2100 DWL2100 1356
+vinsi MACH_VINSI VINSI 1357
+db88f5281 MACH_DB88F5281 DB88F5281 1358
+csb726 MACH_CSB726 CSB726 1359
+tik27 MACH_TIK27 TIK27 1360
+mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 9550f37..1e7a101 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -1195,7 +1195,7 @@
/*
*
*/
-static void __attribute__((unused)) gdbstub_show_regs(void)
+static void __maybe_unused gdbstub_show_regs(void)
{
unsigned long *reg;
int loop;
@@ -1223,7 +1223,7 @@
/*
* dump debugging regs
*/
-static void __attribute__((unused)) gdbstub_dump_debugregs(void)
+static void __maybe_unused gdbstub_dump_debugregs(void)
{
gdbstub_printk("DCR %08lx ", __debug_status.dcr);
gdbstub_printk("BRR %08lx\n", __debug_status.brr);
@@ -2079,25 +2079,25 @@
* GDB wants to call malloc() and free() to allocate memory for calling kernel
* functions directly from its command line
*/
-static void *malloc(size_t size) __attribute__((unused));
+static void *malloc(size_t size) __maybe_unused;
static void *malloc(size_t size)
{
return kmalloc(size, GFP_ATOMIC);
}
-static void free(void *p) __attribute__((unused));
+static void free(void *p) __maybe_unused;
static void free(void *p)
{
kfree(p);
}
-static uint32_t ___get_HSR0(void) __attribute__((unused));
+static uint32_t ___get_HSR0(void) __maybe_unused;
static uint32_t ___get_HSR0(void)
{
return __get_HSR(0);
}
-static uint32_t ___set_HSR0(uint32_t x) __attribute__((unused));
+static uint32_t ___set_HSR0(uint32_t x) __maybe_unused;
static uint32_t ___set_HSR0(uint32_t x)
{
__set_HSR(0, x);
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index dab98fd..54e21c3 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -31,7 +31,7 @@
.long SYMBOL_NAME(sys_mknod)
.long SYMBOL_NAME(sys_chmod) /* 15 */
.long SYMBOL_NAME(sys_chown16)
- .long SYMBOL_NAME(sys_ni_syscall) /* old break syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old break syscall holder */
.long SYMBOL_NAME(sys_stat)
.long SYMBOL_NAME(sys_lseek)
.long SYMBOL_NAME(sys_getpid) /* 20 */
@@ -45,11 +45,11 @@
.long SYMBOL_NAME(sys_fstat)
.long SYMBOL_NAME(sys_pause)
.long SYMBOL_NAME(sys_utime) /* 30 */
- .long SYMBOL_NAME(sys_ni_syscall) /* old stty syscall holder */
- .long SYMBOL_NAME(sys_ni_syscall) /* old gtty syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old stty syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old gtty syscall holder */
.long SYMBOL_NAME(sys_access)
.long SYMBOL_NAME(sys_nice)
- .long SYMBOL_NAME(sys_ni_syscall) /* 35 */ /* old ftime syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* 35 old ftime syscall holder */
.long SYMBOL_NAME(sys_sync)
.long SYMBOL_NAME(sys_kill)
.long SYMBOL_NAME(sys_rename)
@@ -58,7 +58,7 @@
.long SYMBOL_NAME(sys_dup)
.long SYMBOL_NAME(sys_pipe)
.long SYMBOL_NAME(sys_times)
- .long SYMBOL_NAME(sys_ni_syscall) /* old prof syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old prof syscall holder */
.long SYMBOL_NAME(sys_brk) /* 45 */
.long SYMBOL_NAME(sys_setgid16)
.long SYMBOL_NAME(sys_getgid16)
@@ -66,13 +66,13 @@
.long SYMBOL_NAME(sys_geteuid16)
.long SYMBOL_NAME(sys_getegid16) /* 50 */
.long SYMBOL_NAME(sys_acct)
- .long SYMBOL_NAME(sys_umount) /* recycled never used phys() */
- .long SYMBOL_NAME(sys_ni_syscall) /* old lock syscall holder */
+ .long SYMBOL_NAME(sys_umount) /* recycled never used phys() */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old lock syscall holder */
.long SYMBOL_NAME(sys_ioctl)
.long SYMBOL_NAME(sys_fcntl) /* 55 */
- .long SYMBOL_NAME(sys_ni_syscall) /* old mpx syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old mpx syscall holder */
.long SYMBOL_NAME(sys_setpgid)
- .long SYMBOL_NAME(sys_ni_syscall) /* old ulimit syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old ulimit syscall holder */
.long SYMBOL_NAME(sys_ni_syscall)
.long SYMBOL_NAME(sys_umask) /* 60 */
.long SYMBOL_NAME(sys_chroot)
@@ -112,7 +112,7 @@
.long SYMBOL_NAME(sys_fchown16) /* 95 */
.long SYMBOL_NAME(sys_getpriority)
.long SYMBOL_NAME(sys_setpriority)
- .long SYMBOL_NAME(sys_ni_syscall) /* old profil syscall holder */
+ .long SYMBOL_NAME(sys_ni_syscall) /* old profil syscall holder */
.long SYMBOL_NAME(sys_statfs)
.long SYMBOL_NAME(sys_fstatfs) /* 100 */
.long SYMBOL_NAME(sys_ni_syscall) /* ioperm for i386 */
@@ -202,8 +202,8 @@
.long SYMBOL_NAME(sys_capset) /* 185 */
.long SYMBOL_NAME(sys_sigaltstack)
.long SYMBOL_NAME(sys_sendfile)
- .long SYMBOL_NAME(sys_ni_syscall) /* streams1 */
- .long SYMBOL_NAME(sys_ni_syscall) /* streams2 */
+ .long SYMBOL_NAME(sys_ni_syscall) /* streams1 */
+ .long SYMBOL_NAME(sys_ni_syscall) /* streams2 */
.long SYMBOL_NAME(sys_vfork) /* 190 */
.long SYMBOL_NAME(sys_getrlimit)
.long SYMBOL_NAME(sys_mmap2)
@@ -236,10 +236,10 @@
.long SYMBOL_NAME(sys_ni_syscall)
.long SYMBOL_NAME(sys_getdents64) /* 220 */
.long SYMBOL_NAME(sys_fcntl64)
- .long SYMBOL_NAME(sys_ni_syscall) /* reserved for TUX */
- .long SYMBOL_NAME(sys_ni_syscall)
+ .long SYMBOL_NAME(sys_ni_syscall) /* reserved TUX */
+ .long SYMBOL_NAME(sys_ni_syscall) /* reserved Security */
.long SYMBOL_NAME(sys_gettid)
- .long SYMBOL_NAME(sys_ni_syscall) /* 225 */ /* sys_readahead */
+ .long SYMBOL_NAME(sys_readahead) /* 225 */
.long SYMBOL_NAME(sys_setxattr)
.long SYMBOL_NAME(sys_lsetxattr)
.long SYMBOL_NAME(sys_fsetxattr)
@@ -257,8 +257,8 @@
.long SYMBOL_NAME(sys_futex) /* 240 */
.long SYMBOL_NAME(sys_sched_setaffinity)
.long SYMBOL_NAME(sys_sched_getaffinity)
- .long SYMBOL_NAME(sys_ni_syscall) /* sys_set_thread_area */
- .long SYMBOL_NAME(sys_ni_syscall) /* sys_get_thread_area */
+ .long SYMBOL_NAME(sys_ni_syscall)
+ .long SYMBOL_NAME(sys_ni_syscall)
.long SYMBOL_NAME(sys_io_setup) /* 245 */
.long SYMBOL_NAME(sys_io_destroy)
.long SYMBOL_NAME(sys_io_getevents)
@@ -288,8 +288,8 @@
.long SYMBOL_NAME(sys_utimes)
.long SYMBOL_NAME(sys_fadvise64_64)
.long SYMBOL_NAME(sys_ni_syscall) /* sys_vserver */
- .long SYMBOL_NAME(sys_mbind)
- .long SYMBOL_NAME(sys_get_mempolicy)
+ .long SYMBOL_NAME(sys_ni_syscall)
+ .long SYMBOL_NAME(sys_get_mempolicy) /* 275 */
.long SYMBOL_NAME(sys_set_mempolicy)
.long SYMBOL_NAME(sys_mq_open)
.long SYMBOL_NAME(sys_mq_unlink)
@@ -297,16 +297,42 @@
.long SYMBOL_NAME(sys_mq_timedreceive) /* 280 */
.long SYMBOL_NAME(sys_mq_notify)
.long SYMBOL_NAME(sys_mq_getsetattr)
- .long SYMBOL_NAME(sys_ni_syscall) /* reserved for kexec */
.long SYMBOL_NAME(sys_waitid)
- .long SYMBOL_NAME(sys_ni_syscall) /* 285 */ /* available */
- .long SYMBOL_NAME(sys_add_key)
+ .long SYMBOL_NAME(sys_ni_syscall) /* sys_kexec_load */
+ .long SYMBOL_NAME(sys_add_key) /* 285 */
.long SYMBOL_NAME(sys_request_key)
.long SYMBOL_NAME(sys_keyctl)
-
- .rept NR_syscalls-(.-SYMBOL_NAME(sys_call_table))/4
- .long SYMBOL_NAME(sys_ni_syscall)
- .endr
+ .long SYMBOL_NAME(sys_ioprio_set)
+ .long SYMBOL_NAME(sys_ioprio_get) /* 290 */
+ .long SYMBOL_NAME(sys_inotify_init)
+ .long SYMBOL_NAME(sys_inotify_add_watch)
+ .long SYMBOL_NAME(sys_inotify_rm_watch)
+ .long SYMBOL_NAME(sys_migrate_pages)
+ .long SYMBOL_NAME(sys_openat) /* 295 */
+ .long SYMBOL_NAME(sys_mkdirat)
+ .long SYMBOL_NAME(sys_mknodat)
+ .long SYMBOL_NAME(sys_fchownat)
+ .long SYMBOL_NAME(sys_futimesat)
+ .long SYMBOL_NAME(sys_fstatat64) /* 300 */
+ .long SYMBOL_NAME(sys_unlinkat)
+ .long SYMBOL_NAME(sys_renameat)
+ .long SYMBOL_NAME(sys_linkat)
+ .long SYMBOL_NAME(sys_symlinkat)
+ .long SYMBOL_NAME(sys_readlinkat) /* 305 */
+ .long SYMBOL_NAME(sys_fchmodat)
+ .long SYMBOL_NAME(sys_faccessat)
+ .long SYMBOL_NAME(sys_ni_syscall) /* sys_pselect6 */
+ .long SYMBOL_NAME(sys_ni_syscall) /* sys_ppoll */
+ .long SYMBOL_NAME(sys_unshare) /* 310 */
+ .long SYMBOL_NAME(sys_set_robust_list)
+ .long SYMBOL_NAME(sys_get_robust_list)
+ .long SYMBOL_NAME(sys_splice)
+ .long SYMBOL_NAME(sys_sync_file_range)
+ .long SYMBOL_NAME(sys_tee) /* 315 */
+ .long SYMBOL_NAME(sys_vmsplice)
+ .long SYMBOL_NAME(sys_ni_syscall) /* sys_move_pages */
+ .long SYMBOL_NAME(sys_getcpu)
+ .long SYMBOL_NAME(sys_ni_syscall) /* sys_epoll_pwait */
.macro call_sp addr
mov.l #SYMBOL_NAME(\addr),er6
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 30944ee..c2d54b8 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -55,6 +55,10 @@
bool
default y
+config QUICKLIST
+ bool
+ default y
+
config SBUS
bool
@@ -79,10 +83,6 @@
bool
default y
-config ARCH_USES_SLAB_PAGE_STRUCT
- bool
- default y
-
config DMI
bool
default y
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 91cff8d..06da59f 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_X86_SMP) += smp.o smpboot.o tsc_sync.o
+obj-$(CONFIG_SMP) += smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index 9b10af6..f74dfc4 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -71,12 +71,6 @@
.section .text.head,"ax",@progbits
ENTRY(startup_32)
-#ifdef CONFIG_PARAVIRT
- movl %cs, %eax
- testl $0x3, %eax
- jnz startup_paravirt
-#endif
-
/*
* Set segments to known values.
*/
@@ -501,38 +495,6 @@
iret
.section .text
-#ifdef CONFIG_PARAVIRT
-startup_paravirt:
- cld
- movl $(init_thread_union+THREAD_SIZE),%esp
-
- /* We take pains to preserve all the regs. */
- pushl %edx
- pushl %ecx
- pushl %eax
-
- pushl $__start_paravirtprobe
-1:
- movl 0(%esp), %eax
- cmpl $__stop_paravirtprobe, %eax
- je unhandled_paravirt
- pushl (%eax)
- movl 8(%esp), %eax
- call *(%esp)
- popl %eax
-
- movl 4(%esp), %eax
- movl 8(%esp), %ecx
- movl 12(%esp), %edx
-
- addl $4, (%esp)
- jmp 1b
-
-unhandled_paravirt:
- /* Nothing wanted us: we're screwed. */
- ud2
-#endif
-
/*
* Real beginning of normal "text" segment
*/
diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c
index 5c10f37..faab09a 100644
--- a/arch/i386/kernel/paravirt.c
+++ b/arch/i386/kernel/paravirt.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/efi.h>
#include <linux/bcd.h>
-#include <linux/start_kernel.h>
#include <linux/highmem.h>
#include <asm/bug.h>
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index d76d9bc..06dfa65 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -186,6 +186,7 @@
if (__get_cpu_var(cpu_idle_state))
__get_cpu_var(cpu_idle_state) = 0;
+ check_pgt_cache();
rmb();
idle = pm_idle;
diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
index 93f202a..c9a7c98 100644
--- a/arch/i386/kernel/smp.c
+++ b/arch/i386/kernel/smp.c
@@ -421,7 +421,7 @@
}
if (!cpus_empty(cpu_mask))
flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
+ check_pgt_cache();
preempt_enable();
}
@@ -467,7 +467,7 @@
* it goes straight through and wastes no time serializing
* anything. Worst case is that we lose a reschedule ...
*/
-void native_smp_send_reschedule(int cpu)
+static void native_smp_send_reschedule(int cpu)
{
WARN_ON(cpu_is_offline(cpu));
send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
@@ -546,9 +546,10 @@
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
-int native_smp_call_function_mask(cpumask_t mask,
- void (*func)(void *), void *info,
- int wait)
+static int
+native_smp_call_function_mask(cpumask_t mask,
+ void (*func)(void *), void *info,
+ int wait)
{
struct call_data_struct data;
cpumask_t allbutself;
@@ -599,60 +600,6 @@
return 0;
}
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
- return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/**
- * smp_call_function_single - Run a function on another CPU
- * @cpu: The target CPU. Cannot be the calling CPU.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- /* prevent preemption and reschedule on another processor */
- int ret;
- int me = get_cpu();
- if (cpu == me) {
- WARN_ON(1);
- put_cpu();
- return -EBUSY;
- }
-
- ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
- put_cpu();
- return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
static void stop_this_cpu (void * dummy)
{
local_irq_disable();
@@ -670,7 +617,7 @@
* this function calls the 'stop' function on all other CPUs in the system.
*/
-void native_smp_send_stop(void)
+static void native_smp_send_stop(void)
{
/* Don't deadlock on the call lock in panic */
int nolock = !spin_trylock(&call_lock);
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index b92cc4e..08f07a7 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -98,9 +98,6 @@
u8 apicid_2_node[MAX_APICID];
-DEFINE_PER_CPU(unsigned long, this_cpu_off);
-EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-
/*
* Trampoline 80x86 program as an array.
*/
@@ -763,25 +760,6 @@
#define alloc_idle_task(cpu) fork_idle(cpu)
#endif
-/* Initialize the CPU's GDT. This is either the boot CPU doing itself
- (still using the master per-cpu area), or a CPU doing it for a
- secondary which will soon come up. */
-static __cpuinit void init_gdt(int cpu)
-{
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-
- pack_descriptor((u32 *)&gdt[GDT_ENTRY_PERCPU].a,
- (u32 *)&gdt[GDT_ENTRY_PERCPU].b,
- __per_cpu_offset[cpu], 0xFFFFF,
- 0x80 | DESCTYPE_S | 0x2, 0x8);
-
- per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
- per_cpu(cpu_number, cpu) = cpu;
-}
-
-/* Defined in head.S */
-extern struct Xgt_desc_struct early_gdt_descr;
-
static int __cpuinit do_boot_cpu(int apicid, int cpu)
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
diff --git a/arch/i386/kernel/smpcommon.c b/arch/i386/kernel/smpcommon.c
new file mode 100644
index 0000000..1868ae1
--- /dev/null
+++ b/arch/i386/kernel/smpcommon.c
@@ -0,0 +1,79 @@
+/*
+ * SMP stuff which is common to all sub-architectures.
+ */
+#include <linux/module.h>
+#include <asm/smp.h>
+
+DEFINE_PER_CPU(unsigned long, this_cpu_off);
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
+
+/* Initialize the CPU's GDT. This is either the boot CPU doing itself
+ (still using the master per-cpu area), or a CPU doing it for a
+ secondary which will soon come up. */
+__cpuinit void init_gdt(int cpu)
+{
+ struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+
+ pack_descriptor((u32 *)&gdt[GDT_ENTRY_PERCPU].a,
+ (u32 *)&gdt[GDT_ENTRY_PERCPU].b,
+ __per_cpu_offset[cpu], 0xFFFFF,
+ 0x80 | DESCTYPE_S | 0x2, 0x8);
+
+ per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
+ per_cpu(cpu_number, cpu) = cpu;
+}
+
+
+/**
+ * smp_call_function(): Run a function on all other CPUs.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+{
+ return smp_call_function_mask(cpu_online_map, func, info, wait);
+}
+EXPORT_SYMBOL(smp_call_function);
+
+/**
+ * smp_call_function_single - Run a function on another CPU
+ * @cpu: The target CPU. Cannot be the calling CPU.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ */
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ /* prevent preemption and reschedule on another processor */
+ int ret;
+ int me = get_cpu();
+ if (cpu == me) {
+ WARN_ON(1);
+ put_cpu();
+ return -EBUSY;
+ }
+
+ ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
+
+ put_cpu();
+ return ret;
+}
+EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index 0772678..bf6adce 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -320,3 +320,6 @@
.long sys_getcpu
.long sys_epoll_pwait
.long sys_utimensat /* 320 */
+ .long sys_signalfd
+ .long sys_timerfd
+ .long sys_eventfd
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index c05e7e8..90da057 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -733,11 +733,6 @@
*/
if (nmi_watchdog_tick(regs, reason))
return;
-#endif
- if (notify_die(DIE_NMI_POST, "nmi_post", regs, reason, 2, 0)
- == NOTIFY_STOP)
- return;
-#ifdef CONFIG_X86_LOCAL_APIC
if (!do_nmi_callback(regs, smp_processor_id()))
#endif
unknown_nmi_error(reason, regs);
diff --git a/arch/i386/kernel/verify_cpu.S b/arch/i386/kernel/verify_cpu.S
index e51a869..b2a9d80 100644
--- a/arch/i386/kernel/verify_cpu.S
+++ b/arch/i386/kernel/verify_cpu.S
@@ -10,7 +10,9 @@
#if CONFIG_X86_MINIMUM_CPU_MODEL >= 4
pushfl
- orl $(1<<18),(%esp) # try setting AC
+ pop %eax
+ orl $(1<<18),%eax # try setting AC
+ push %eax
popfl
pushfl
popl %eax
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
index 23e8614..80bec66 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -78,12 +78,6 @@
CONSTRUCTORS
} :data
- .paravirtprobe : AT(ADDR(.paravirtprobe) - LOAD_OFFSET) {
- __start_paravirtprobe = .;
- *(.paravirtprobe)
- __stop_paravirtprobe = .;
- }
-
. = ALIGN(4096);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
__nosave_begin = .;
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
index 50d9c52..b87f854 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -27,7 +27,6 @@
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/arch_hooks.h>
-#include <asm/pda.h>
/* TLB state -- visible externally, indexed physically */
DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0 };
@@ -422,7 +421,7 @@
VOYAGER_SUS_IN_CONTROL_PORT);
current_thread_info()->cpu = boot_cpu_id;
- write_pda(cpu_number, boot_cpu_id);
+ x86_write_percpu(cpu_number, boot_cpu_id);
}
/*
@@ -435,7 +434,7 @@
*c = boot_cpu_data;
- identify_cpu(c);
+ identify_secondary_cpu(c);
}
/* set up the trampoline and return the physical address of the code */
@@ -459,7 +458,7 @@
/* external functions not defined in the headers */
extern void calibrate_delay(void);
- secondary_cpu_init();
+ cpu_init();
/* OK, we're in the routine */
ack_CPI(VIC_CPU_BOOT_CPI);
@@ -572,7 +571,9 @@
/* init_tasks (in sched.c) is indexed logically */
stack_start.esp = (void *) idle->thread.esp;
- init_gdt(cpu, idle);
+ init_gdt(cpu);
+ per_cpu(current_task, cpu) = idle;
+ early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
irq_ctx_init(cpu);
/* Note: Don't modify initial ss override */
@@ -859,8 +860,8 @@
/* This routine is called with a physical cpu mask */
static void
-flush_tlb_others (unsigned long cpumask, struct mm_struct *mm,
- unsigned long va)
+voyager_flush_tlb_others (unsigned long cpumask, struct mm_struct *mm,
+ unsigned long va)
{
int stuck = 50000;
@@ -912,7 +913,7 @@
cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id());
local_flush_tlb();
if (cpu_mask)
- flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+ voyager_flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
preempt_enable();
}
@@ -934,7 +935,7 @@
leave_mm(smp_processor_id());
}
if (cpu_mask)
- flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
+ voyager_flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
preempt_enable();
}
@@ -955,7 +956,7 @@
}
if (cpu_mask)
- flush_tlb_others(cpu_mask, mm, va);
+ voyager_flush_tlb_others(cpu_mask, mm, va);
preempt_enable();
}
@@ -1044,10 +1045,12 @@
}
static int
-__smp_call_function_mask (void (*func) (void *info), void *info, int retry,
- int wait, __u32 mask)
+voyager_smp_call_function_mask (cpumask_t cpumask,
+ void (*func) (void *info), void *info,
+ int wait)
{
struct call_data_struct data;
+ u32 mask = cpus_addr(cpumask)[0];
mask &= ~(1<<smp_processor_id());
@@ -1083,47 +1086,6 @@
return 0;
}
-/* Call this function on all CPUs using the function_interrupt above
- <func> The function to run. This must be fast and non-blocking.
- <info> An arbitrary pointer to pass to the function.
- <retry> If true, keep retrying until ready.
- <wait> If true, wait until function has completed on other CPUs.
- [RETURNS] 0 on success, else a negative status code. Does not return until
- remote CPUs are nearly ready to execute <<func>> or are or have executed.
-*/
-int
-smp_call_function(void (*func) (void *info), void *info, int retry,
- int wait)
-{
- __u32 mask = cpus_addr(cpu_online_map)[0];
-
- return __smp_call_function_mask(func, info, retry, wait, mask);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/*
- * smp_call_function_single - Run a function on another CPU
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Currently unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Retrurns 0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int
-smp_call_function_single(int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- __u32 mask = 1 << cpu;
-
- return __smp_call_function_mask(func, info, nonatomic, wait, mask);
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
/* Sorry about the name. In an APIC based system, the APICs
* themselves are programmed to send a timer interrupt. This is used
* by linux to reschedule the processor. Voyager doesn't have this,
@@ -1237,8 +1199,8 @@
}
/* send a reschedule CPI to one CPU by physical CPU number*/
-void
-smp_send_reschedule(int cpu)
+static void
+voyager_smp_send_reschedule(int cpu)
{
send_one_CPI(cpu, VIC_RESCHEDULE_CPI);
}
@@ -1267,8 +1229,8 @@
}
/* broadcast a halt to all other CPUs */
-void
-smp_send_stop(void)
+static void
+voyager_smp_send_stop(void)
{
smp_call_function(smp_stop_cpu_function, NULL, 1, 1);
}
@@ -1930,23 +1892,26 @@
smp_stop_cpu_function(NULL);
}
-void __init
-smp_prepare_cpus(unsigned int max_cpus)
+static void __init
+voyager_smp_prepare_cpus(unsigned int max_cpus)
{
/* FIXME: ignore max_cpus for now */
smp_boot_cpus();
}
-void __devinit smp_prepare_boot_cpu(void)
+static void __devinit voyager_smp_prepare_boot_cpu(void)
{
+ init_gdt(smp_processor_id());
+ switch_to_new_gdt();
+
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), cpu_callout_map);
cpu_set(smp_processor_id(), cpu_possible_map);
cpu_set(smp_processor_id(), cpu_present_map);
}
-int __devinit
-__cpu_up(unsigned int cpu)
+static int __devinit
+voyager_cpu_up(unsigned int cpu)
{
/* This only works at boot for x86. See "rewrite" above. */
if (cpu_isset(cpu, smp_commenced_mask))
@@ -1962,8 +1927,8 @@
return 0;
}
-void __init
-smp_cpus_done(unsigned int max_cpus)
+static void __init
+voyager_smp_cpus_done(unsigned int max_cpus)
{
zap_low_mappings();
}
@@ -1972,5 +1937,16 @@
smp_setup_processor_id(void)
{
current_thread_info()->cpu = hard_smp_processor_id();
- write_pda(cpu_number, hard_smp_processor_id());
+ x86_write_percpu(cpu_number, hard_smp_processor_id());
}
+
+struct smp_ops smp_ops = {
+ .smp_prepare_boot_cpu = voyager_smp_prepare_boot_cpu,
+ .smp_prepare_cpus = voyager_smp_prepare_cpus,
+ .cpu_up = voyager_cpu_up,
+ .smp_cpus_done = voyager_smp_cpus_done,
+
+ .smp_send_stop = voyager_smp_send_stop,
+ .smp_send_reschedule = voyager_smp_send_reschedule,
+ .smp_call_function_mask = voyager_smp_call_function_mask,
+};
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index c50782e..b22ce8d 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -740,7 +740,6 @@
EXPORT_SYMBOL_GPL(remove_memory);
#endif
-struct kmem_cache *pgd_cache;
struct kmem_cache *pmd_cache;
void __init pgtable_cache_init(void)
@@ -764,12 +763,6 @@
pgd_size = PAGE_SIZE;
}
}
- pgd_cache = kmem_cache_create("pgd",
- pgd_size,
- pgd_size,
- SLAB_PANIC,
- pgd_ctor,
- (!SHARED_KERNEL_PMD) ? pgd_dtor : NULL);
}
/*
diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c
index 9a96c16..8d7c086 100644
--- a/arch/i386/mm/pgtable.c
+++ b/arch/i386/mm/pgtable.c
@@ -13,6 +13,7 @@
#include <linux/pagemap.h>
#include <linux/spinlock.h>
#include <linux/module.h>
+#include <linux/quicklist.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -205,8 +206,6 @@
* against pageattr.c; it is the unique case in which a valid change
* of kernel pagetables can't be lazily synchronized by vmalloc faults.
* vmalloc faults work because attached pagetables are never freed.
- * The locking scheme was chosen on the basis of manfred's
- * recommendations and having no core impact whatsoever.
* -- wli
*/
DEFINE_SPINLOCK(pgd_lock);
@@ -232,9 +231,11 @@
set_page_private(next, (unsigned long)pprev);
}
+
+
#if (PTRS_PER_PMD == 1)
/* Non-PAE pgd constructor */
-void pgd_ctor(void *pgd, struct kmem_cache *cache, unsigned long unused)
+void pgd_ctor(void *pgd)
{
unsigned long flags;
@@ -256,7 +257,7 @@
}
#else /* PTRS_PER_PMD > 1 */
/* PAE pgd constructor */
-void pgd_ctor(void *pgd, struct kmem_cache *cache, unsigned long unused)
+void pgd_ctor(void *pgd)
{
/* PAE, kernel PMD may be shared */
@@ -275,11 +276,12 @@
}
#endif /* PTRS_PER_PMD */
-void pgd_dtor(void *pgd, struct kmem_cache *cache, unsigned long unused)
+void pgd_dtor(void *pgd)
{
unsigned long flags; /* can be called from interrupt context */
- BUG_ON(SHARED_KERNEL_PMD);
+ if (SHARED_KERNEL_PMD)
+ return;
paravirt_release_pd(__pa(pgd) >> PAGE_SHIFT);
spin_lock_irqsave(&pgd_lock, flags);
@@ -321,7 +323,7 @@
pgd_t *pgd_alloc(struct mm_struct *mm)
{
int i;
- pgd_t *pgd = kmem_cache_alloc(pgd_cache, GFP_KERNEL);
+ pgd_t *pgd = quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
if (PTRS_PER_PMD == 1 || !pgd)
return pgd;
@@ -344,7 +346,7 @@
paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT);
pmd_cache_free(pmd, i);
}
- kmem_cache_free(pgd_cache, pgd);
+ quicklist_free(0, pgd_dtor, pgd);
return NULL;
}
@@ -361,5 +363,11 @@
pmd_cache_free(pmd, i);
}
/* in the non-PAE case, free_pgtables() clears user pgd entries */
- kmem_cache_free(pgd_cache, pgd);
+ quicklist_free(0, pgd_dtor, pgd);
}
+
+void check_pgt_cache(void)
+{
+ quicklist_trim(0, pgd_dtor, 25, 16);
+}
+
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6e41471..de1bff6 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -31,6 +31,10 @@
def_bool y
depends on !IA64_SGI_SN2
+config QUICKLIST
+ bool
+ default y
+
config MMU
bool
default y
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 2153bca..94e5710 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -63,7 +63,7 @@
return dev && dev->dma_mask && !hwiommu_dma_supported(dev, *dev->dma_mask);
}
-void
+void __init
hwsw_init (void)
{
/* default to a smallish 2MB sw I/O TLB */
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
index 92d7d0c..8850fe4 100644
--- a/arch/ia64/ia32/audit.c
+++ b/arch/ia64/ia32/audit.c
@@ -20,6 +20,11 @@
~0U
};
+unsigned ia32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
int ia32_classify_syscall(unsigned syscall)
{
switch(syscall) {
diff --git a/arch/ia64/kernel/audit.c b/arch/ia64/kernel/audit.c
index 0468255..f3802ae 100644
--- a/arch/ia64/kernel/audit.c
+++ b/arch/ia64/kernel/audit.c
@@ -23,6 +23,20 @@
~0U
};
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_IA32_SUPPORT
+ if (arch == AUDIT_ARCH_I386)
+ return 1;
+#endif
+ return 0;
+}
+
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_IA32_SUPPORT
@@ -49,15 +63,18 @@
extern __u32 ia32_write_class[];
extern __u32 ia32_read_class[];
extern __u32 ia32_chattr_class[];
+ extern __u32 ia32_signal_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
return 0;
}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index b50bf20..144b056 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1583,5 +1583,7 @@
data8 sys_vmsplice
data8 sys_ni_syscall // reserved for move_pages
data8 sys_getcpu
+ data8 sys_epoll_pwait // 1305
+ data8 sys_utimensat
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index 6a49600..b642648 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -291,5 +291,5 @@
module_exit(err_inject_exit);
MODULE_AUTHOR("Fenghua Yu <fenghua.yu@intel.com>");
-MODULE_DESCRIPTION("MC error injection kenrel sysfs interface");
+MODULE_DESCRIPTION("MC error injection kernel sysfs interface");
MODULE_LICENSE("GPL");
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index ce49c85..b4c2396 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -104,6 +104,17 @@
irq_redir[irq] = (char) (redir & 0xff);
}
}
+
+bool is_affinity_mask_valid(cpumask_t cpumask)
+{
+ if (ia64_platform_is("sn2")) {
+ /* Only allow one CPU to be specified in the smp_affinity mask */
+ if (cpus_weight(cpumask) != 1)
+ return false;
+ }
+ return true;
+}
+
#endif /* CONFIG_SMP */
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 4f5fd09..72e593e 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -370,14 +370,18 @@
static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- kcb->prev_kprobe.kp = kprobe_running();
- kcb->prev_kprobe.status = kcb->kprobe_status;
+ unsigned int i;
+ i = atomic_add_return(1, &kcb->prev_kprobe_index);
+ kcb->prev_kprobe[i-1].kp = kprobe_running();
+ kcb->prev_kprobe[i-1].status = kcb->kprobe_status;
}
static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
- kcb->kprobe_status = kcb->prev_kprobe.status;
+ unsigned int i;
+ i = atomic_sub_return(1, &kcb->prev_kprobe_index);
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe[i].kp;
+ kcb->kprobe_status = kcb->prev_kprobe[i].status;
}
static void __kprobes set_current_kprobe(struct kprobe *p,
diff --git a/arch/ia64/kernel/machvec.c b/arch/ia64/kernel/machvec.c
index 9620822..13df337 100644
--- a/arch/ia64/kernel/machvec.c
+++ b/arch/ia64/kernel/machvec.c
@@ -35,7 +35,7 @@
return 0;
}
-void
+void __init
machvec_init (const char *name)
{
struct ia64_machine_vector *mv;
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index f8ae709..26814de 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -118,7 +118,9 @@
#define CPE_HISTORY_LENGTH 5
#define CMC_HISTORY_LENGTH 5
+#ifdef CONFIG_ACPI
static struct timer_list cpe_poll_timer;
+#endif
static struct timer_list cmc_poll_timer;
/*
* This variable tells whether we are currently in polling mode.
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 44ce5ed..7ac8592 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -88,7 +88,7 @@
printk(KERN_INFO "%d pages shared\n", total_shared);
printk(KERN_INFO "%d pages swap cached\n", total_cached);
printk(KERN_INFO "Total of %ld pages in page table cache\n",
- pgtable_quicklist_total_size());
+ quicklist_total_size());
printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
}
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 9484444..38085ac 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -561,7 +561,7 @@
printk(KERN_INFO "%d pages shared\n", total_shared);
printk(KERN_INFO "%d pages swap cached\n", total_cached);
printk(KERN_INFO "Total of %ld pages in page table cache\n",
- pgtable_quicklist_total_size());
+ quicklist_total_size());
printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
}
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index cffb1e8..c14abef 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -39,9 +39,6 @@
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-DEFINE_PER_CPU(unsigned long *, __pgtable_quicklist);
-DEFINE_PER_CPU(long, __pgtable_quicklist_size);
-
extern void ia64_tlb_init (void);
unsigned long MAX_DMA_ADDRESS = PAGE_OFFSET + 0x100000000UL;
@@ -56,54 +53,6 @@
struct page *zero_page_memmap_ptr; /* map entry for zero page */
EXPORT_SYMBOL(zero_page_memmap_ptr);
-#define MIN_PGT_PAGES 25UL
-#define MAX_PGT_FREES_PER_PASS 16L
-#define PGT_FRACTION_OF_NODE_MEM 16
-
-static inline long
-max_pgt_pages(void)
-{
- u64 node_free_pages, max_pgt_pages;
-
-#ifndef CONFIG_NUMA
- node_free_pages = nr_free_pages();
-#else
- node_free_pages = node_page_state(numa_node_id(), NR_FREE_PAGES);
-#endif
- max_pgt_pages = node_free_pages / PGT_FRACTION_OF_NODE_MEM;
- max_pgt_pages = max(max_pgt_pages, MIN_PGT_PAGES);
- return max_pgt_pages;
-}
-
-static inline long
-min_pages_to_free(void)
-{
- long pages_to_free;
-
- pages_to_free = pgtable_quicklist_size - max_pgt_pages();
- pages_to_free = min(pages_to_free, MAX_PGT_FREES_PER_PASS);
- return pages_to_free;
-}
-
-void
-check_pgt_cache(void)
-{
- long pages_to_free;
-
- if (unlikely(pgtable_quicklist_size <= MIN_PGT_PAGES))
- return;
-
- preempt_disable();
- while (unlikely((pages_to_free = min_pages_to_free()) > 0)) {
- while (pages_to_free--) {
- free_page((unsigned long)pgtable_quicklist_alloc());
- }
- preempt_enable();
- preempt_disable();
- }
- preempt_enable();
-}
-
void
lazy_mmu_prot_update (pte_t pte)
{
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index d48bcd8..7ed72d3 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -364,7 +364,7 @@
element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
if (!element) {
- dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
+ dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
return;
}
element->sysdata = SN_PCIDEV_INFO(dev);
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 57c723f..7ba4032 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -574,7 +574,7 @@
u64 remote_vars_pa, struct xpc_vars *remote_vars)
{
part->remote_rp_version = remote_rp_version;
- dev_dbg(xpc_part, " remote_rp_version = 0x%016lx\n",
+ dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n",
part->remote_rp_version);
part->remote_rp_stamp = *remote_rp_stamp;
diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c
index 88fad85..da72135 100644
--- a/arch/ia64/sn/kernel/xpnet.c
+++ b/arch/ia64/sn/kernel/xpnet.c
@@ -343,8 +343,8 @@
enum xpc_retval ret;
- dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %d, "
- "%d)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
+ dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
+ "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
XPNET_MAX_IDLE_KTHREADS);
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 9740d6b..c3bb8a7 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -241,6 +241,10 @@
bool
default y
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+ bool
+ default y
+
config PREEMPT
bool "Preemptible Kernel"
help
diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S
index 8bb74b1..49a6d16 100644
--- a/arch/m32r/mm/mmu.S
+++ b/arch/m32r/mm/mmu.S
@@ -163,7 +163,8 @@
; pte_data = (unsigned long)pte_val(*pte);
ld r2, @r3 ; r2: pte data
- or3 r2, r2, #2 ; _PAGE_PRESENT(=2)
+ and3 r3, r2, #2 ; _PAGE_PRESENT(=2) check
+ beqz r3, 3f
.fillinsn
5:
@@ -264,11 +265,8 @@
;
and3 r1, r1, #0xeff
ldi r4, #611 ; _KERNPG_TABLE(=611)
- beq r1, r4, 4f ; !pmd_bad(*pmd) ?
- .fillinsn
-3:
- ldi r1, #0 ; r1: pte_data = 0
- bra 5f
+ bne r1, r4, 3f ; !pmd_bad(*pmd) ?
+
.fillinsn
4:
; pte = pte_offset(pmd, address);
@@ -282,8 +280,10 @@
add r4, r3 ; r4: pte
; pte_data = (unsigned long)pte_val(*pte);
ld r1, @r4 ; r1: pte_data
- .fillinsn
+ and3 r3, r1, #2 ; _PAGE_PRESENT(=2) check
+ beqz r3, 3f
+ .fillinsn
;; set tlb
; r0: address, r1: pte_data, r2: entry
; r3,r4: (free)
@@ -295,8 +295,7 @@
and3 r4, r4, #(MMU_CONTEXT_ASID_MASK)
or r3, r4
st r3, @r2
- or3 r4, r1, #2 ; _PAGE_PRESENT(=2)
- st r4, @(4,r2) ; set_tlb_data(entry, pte_data);
+ st r1, @(4,r2) ; set_tlb_data(entry, pte_data);
ld r4, @sp+
ld r3, @sp+
@@ -306,6 +305,11 @@
ld sp, @sp+
rte
+ .fillinsn
+3:
+ ldi r1, #2 ; r1: pte_data = 0 | _PAGE_PRESENT(=2)
+ bra 5b
+
#else
#error unknown isa configuration
#endif
diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 865f9fb..13854ed 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -181,7 +181,7 @@
* Zero Userspace
*/
-unsigned long clear_user(void __user *to, unsigned long n)
+unsigned long __clear_user(void __user *to, unsigned long n)
{
unsigned long res;
@@ -219,4 +219,4 @@
return res;
}
-EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 16ecea3..0f09412 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -15,121 +15,8 @@
prompt "System type"
default SGI_IP22
-config MIPS_MTX1
- bool "4G Systems MTX-1 board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
- select SOC_AU1500
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_BOSPORUS
- bool "AMD Alchemy Bosporus board"
- select SOC_AU1500
- select DMA_NONCOHERENT
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_PB1000
- bool "AMD Alchemy PB1000 board"
- select SOC_AU1000
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_PB1100
- bool "AMD Alchemy PB1100 board"
- select SOC_AU1100
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_PB1500
- bool "AMD Alchemy PB1500 board"
- select SOC_AU1500
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_PB1550
- bool "AMD Alchemy PB1550 board"
- select SOC_AU1550
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_PB1200
- bool "AMD Alchemy PB1200 board"
- select SOC_AU1200
- select DMA_NONCOHERENT
- select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_DB1000
- bool "AMD Alchemy DB1000 board"
- select SOC_AU1000
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select RESOURCES_64BIT if PCI
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_DB1100
- bool "AMD Alchemy DB1100 board"
- select SOC_AU1100
- select DMA_NONCOHERENT
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_DB1500
- bool "AMD Alchemy DB1500 board"
- select SOC_AU1500
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_DB1550
- bool "AMD Alchemy DB1550 board"
- select SOC_AU1550
- select HW_HAS_PCI
- select DMA_NONCOHERENT
- select MIPS_DISABLE_OBSOLETE_IDE
- select RESOURCES_64BIT if PCI
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_DB1200
- bool "AMD Alchemy DB1200 board"
- select SOC_AU1200
- select DMA_COHERENT
- select MIPS_DISABLE_OBSOLETE_IDE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config MIPS_MIRAGE
- bool "AMD Alchemy Mirage board"
- select DMA_NONCOHERENT
- select SOC_AU1500
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_LITTLE_ENDIAN
+config MACH_ALCHEMY
+ bool "Alchemy processor based machines"
config BASLER_EXCITE
bool "Basler eXcite smart camera"
@@ -369,28 +256,6 @@
This option enables support for MIPS Technologies MIPSsim software
emulator.
-config MOMENCO_JAGUAR_ATX
- bool "Momentum Jaguar board"
- select BOOT_ELF32
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_MV64340
- select LIMITED_DMA
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_RM9000
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- help
- The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
config MOMENCO_OCELOT
bool "Momentum Ocelot board"
select DMA_NONCOHERENT
@@ -446,29 +311,6 @@
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
Momentum Computer <http://www.momenco.com/>.
-config MOMENCO_OCELOT_G
- bool "Momentum Ocelot-G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select PCI_MARVELL
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- The Ocelot is a MIPS-based Single Board Computer (SBC) made by
- Momentum Computer <http://www.momenco.com/>.
-
-config MIPS_XXS1500
- bool "MyCable XXS1500 board"
- select DMA_NONCOHERENT
- select SOC_AU1500
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
config PNX8550_JBS
bool "Philips PNX8550 based JBS board"
select PNX8550
@@ -775,7 +617,6 @@
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select TOSHIBA_BOARDS
select GENERIC_HARDIRQS_NO__DO_IRQ
config TOSHIBA_RBTX4927
@@ -791,7 +632,6 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
- select TOSHIBA_BOARDS
select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4927 processor. Say Y here to
@@ -811,7 +651,6 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
- select TOSHIBA_BOARDS
select GENERIC_HARDIRQS_NO__DO_IRQ
help
This Toshiba board is based on the TX4938 processor. Say Y here to
@@ -819,11 +658,11 @@
endchoice
+source "arch/mips/au1000/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
-source "arch/mips/momentum/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
@@ -923,11 +762,6 @@
config I8259
bool
-config LIMITED_DMA
- bool
- select HIGHMEM
- select SYS_SUPPORTS_HIGHMEM
-
config MIPS_BONITO64
bool
@@ -1013,33 +847,6 @@
config PCI_MARVELL
bool
-config SOC_AU1000
- bool
- select SOC_AU1X00
-
-config SOC_AU1100
- bool
- select SOC_AU1X00
-
-config SOC_AU1500
- bool
- select SOC_AU1X00
-
-config SOC_AU1550
- bool
- select SOC_AU1X00
-
-config SOC_AU1200
- bool
- select SOC_AU1X00
-
-config SOC_AU1X00
- bool
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_APM_EMULATION
- select SYS_SUPPORTS_KGDB
-
config SERIAL_RM9000
bool
@@ -1081,9 +888,9 @@
choice
prompt "Galileo Chip Clock"
#default SYSCLK_83 if MIPS_EV64120
- depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+ depends on MIPS_EV64120 || MOMENCO_OCELOT
default SYSCLK_83 if MIPS_EV64120
- default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
+ default SYSCLK_100 if MOMENCO_OCELOT
config SYSCLK_75
bool "75" if MIPS_EV64120
@@ -1092,7 +899,7 @@
bool "83.3" if MIPS_EV64120
config SYSCLK_100
- bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
+ bool "100" if MIPS_EV64120 || MOMENCO_OCELOT
endchoice
@@ -1131,9 +938,6 @@
config BOOT_ELF64
bool
-config TOSHIBA_BOARDS
- bool
-
menu "CPU selection"
choice
@@ -1557,6 +1361,7 @@
bool "Use 1 TC on each available VPE for SMP"
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
select CPU_MIPSR2_SRS
select MIPS_MT
select NR_CPUS_DEFAULT_2
@@ -1572,6 +1377,7 @@
#depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
select CPU_MIPSR2_SRS
select MIPS_MT
select NR_CPUS_DEFAULT_8
@@ -1584,6 +1390,8 @@
config MIPS_VPE_LOADER
bool "VPE loader support."
depends on SYS_SUPPORTS_MULTITHREADING
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
select MIPS_MT
help
Includes a loader for loading an elf relocatable object
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 4892db8..f450066 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -343,15 +343,6 @@
load-$(CONFIG_MOMENCO_OCELOT) += 0xffffffff80100000
#
-# Momentum Ocelot-G board
-#
-# The Ocelot-G setup.o must be linked early - it does the ioremap() for the
-# mips_io_port_base.
-#
-core-$(CONFIG_MOMENCO_OCELOT_G) += arch/mips/momentum/ocelot_g/
-load-$(CONFIG_MOMENCO_OCELOT_G) += 0xffffffff80100000
-
-#
# Momentum Ocelot-C and -CS boards
#
# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
@@ -388,17 +379,6 @@
load-$(CONFIG_BASLER_EXCITE) += 0x80100000
#
-# Momentum Jaguar ATX
-#
-core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
-cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
-#ifdef CONFIG_JAGUAR_DMALOW
-#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff88000000
-#else
-load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0xffffffff80100000
-#endif
-
-#
# NEC DDB
#
core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
@@ -729,3 +709,25 @@
CLEAN_FILES += vmlinux.32 \
vmlinux.64 \
vmlinux.ecoff
+
+quiet_cmd_syscalls_n32 = CALL-N32 $<
+ cmd_syscalls_n32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=n32
+
+quiet_cmd_syscalls_o32 = CALL-O32 $<
+ cmd_syscalls_o32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=32
+
+PHONY += missing-syscalls-n32 missing-syscalls-o32
+
+missing-syscalls-n32: scripts/checksyscalls.sh FORCE
+ $(call cmd,syscalls_n32)
+
+missing-syscalls-o32: scripts/checksyscalls.sh FORCE
+ $(call cmd,syscalls_o32)
+
+archprepare:
+ifdef CONFIG_MIPS32_N32
+ $(Q)$(MAKE) $(build)=arch/mips missing-syscalls-n32
+endif
+ifdef CONFIG_MIPS32_O32
+ $(Q)$(MAKE) $(build)=arch/mips missing-syscalls-o32
+endif
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
new file mode 100644
index 0000000..abea880
--- /dev/null
+++ b/arch/mips/au1000/Kconfig
@@ -0,0 +1,142 @@
+choice
+ prompt "Machine type"
+ depends on MACH_ALCHEMY
+ default MIPS_DB1000
+
+config MIPS_MTX1
+ bool "4G Systems MTX-1 board"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
+ select SOC_AU1500
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_BOSPORUS
+ bool "Alchemy Bosporus board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1000
+ bool "Alchemy DB1000 board"
+ select SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1100
+ bool "Alchemy DB1100 board"
+ select SOC_AU1100
+ select DMA_NONCOHERENT
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1200
+ bool "Alchemy DB1200 board"
+ select SOC_AU1200
+ select DMA_COHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1500
+ bool "Alchemy DB1500 board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_DB1550
+ bool "Alchemy DB1550 board"
+ select SOC_AU1550
+ select HW_HAS_PCI
+ select DMA_NONCOHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_MIRAGE
+ bool "Alchemy Mirage board"
+ select DMA_NONCOHERENT
+ select SOC_AU1500
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1000
+ bool "Alchemy PB1000 board"
+ select SOC_AU1000
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1100
+ bool "Alchemy PB1100 board"
+ select SOC_AU1100
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1200
+ bool "Alchemy PB1200 board"
+ select SOC_AU1200
+ select DMA_NONCOHERENT
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1500
+ bool "Alchemy PB1500 board"
+ select SOC_AU1500
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select RESOURCES_64BIT if PCI
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_PB1550
+ bool "Alchemy PB1550 board"
+ select SOC_AU1550
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_DISABLE_OBSOLETE_IDE
+ select RESOURCES_64BIT if PCI
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config MIPS_XXS1500
+ bool "MyCable XXS1500 board"
+ select DMA_NONCOHERENT
+ select SOC_AU1500
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
+endchoice
+
+config SOC_AU1000
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1100
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1500
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1550
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1200
+ bool
+ select SOC_AU1X00
+
+config SOC_AU1X00
+ bool
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_APM_EMULATION
+ select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
index cc1ce77..e00bc2d 100644
--- a/arch/mips/basler/excite/excite_device.c
+++ b/arch/mips/basler/excite/excite_device.c
@@ -68,7 +68,7 @@
static struct resource
- excite_ctr_resource __attribute__((unused)) = {
+ excite_ctr_resource __maybe_unused = {
.name = "GPI counters",
.start = 0,
.end = 5,
@@ -77,7 +77,7 @@
.sibling = NULL,
.child = NULL
},
- excite_gpislice_resource __attribute__((unused)) = {
+ excite_gpislice_resource __maybe_unused = {
.name = "GPI slices",
.start = 0,
.end = 1,
@@ -86,7 +86,7 @@
.sibling = NULL,
.child = NULL
},
- excite_mdio_channel_resource __attribute__((unused)) = {
+ excite_mdio_channel_resource __maybe_unused = {
.name = "MDIO channels",
.start = 0,
.end = 1,
@@ -95,7 +95,7 @@
.sibling = NULL,
.child = NULL
},
- excite_fifomem_resource __attribute__((unused)) = {
+ excite_fifomem_resource __maybe_unused = {
.name = "FIFO memory",
.start = 0,
.end = 767,
@@ -104,7 +104,7 @@
.sibling = NULL,
.child = NULL
},
- excite_scram_resource __attribute__((unused)) = {
+ excite_scram_resource __maybe_unused = {
.name = "Scratch RAM",
.start = EXCITE_PHYS_SCRAM,
.end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
@@ -113,7 +113,7 @@
.sibling = NULL,
.child = NULL
},
- excite_fpga_resource __attribute__((unused)) = {
+ excite_fpga_resource __maybe_unused = {
.name = "System FPGA",
.start = EXCITE_PHYS_FPGA,
.end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
@@ -122,7 +122,7 @@
.sibling = NULL,
.child = NULL
},
- excite_nand_resource __attribute__((unused)) = {
+ excite_nand_resource __maybe_unused = {
.name = "NAND flash control",
.start = EXCITE_PHYS_NAND,
.end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
@@ -131,7 +131,7 @@
.sibling = NULL,
.child = NULL
},
- excite_titan_resource __attribute__((unused)) = {
+ excite_titan_resource __maybe_unused = {
.name = "TITAN registers",
.start = EXCITE_PHYS_TITAN,
.end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index 9565b21..c292f80 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Cobalt micro systems family specific parts of the kernel
#
-obj-y := irq.o reset.o setup.o buttons.o
+obj-y := buttons.o irq.o reset.o rtc.o serial.o setup.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_EARLY_PRINTK) += console.o
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
new file mode 100644
index 0000000..284daef
--- /dev/null
+++ b/arch/mips/cobalt/rtc.c
@@ -0,0 +1,63 @@
+/*
+ * Registration of Cobalt RTC platform device.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+static struct resource cobalt_rtc_resource[] __initdata = {
+ {
+ .start = 0x70,
+ .end = 0x77,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static __init int cobalt_rtc_add(void)
+{
+ struct platform_device *pdev;
+ int retval;
+
+ pdev = platform_device_alloc("rtc_cmos", -1);
+ if (!pdev)
+ return -ENOMEM;
+
+ retval = platform_device_add_resources(pdev, cobalt_rtc_resource,
+ ARRAY_SIZE(cobalt_rtc_resource));
+ if (retval)
+ goto err_free_device;
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto err_free_device;
+
+ return 0;
+
+err_free_device:
+ platform_device_put(pdev);
+
+ return retval;
+}
+device_initcall(cobalt_rtc_add);
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
new file mode 100644
index 0000000..c271165
--- /dev/null
+++ b/arch/mips/cobalt/serial.c
@@ -0,0 +1,85 @@
+/*
+ * Registration of Cobalt UART platform device.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <cobalt.h>
+
+static struct resource cobalt_uart_resource[] __initdata = {
+ {
+ .start = 0x1c800000,
+ .end = 0x1c800007,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = COBALT_SERIAL_IRQ,
+ .end = COBALT_SERIAL_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct plat_serial8250_port cobalt_serial8250_port[] = {
+ {
+ .irq = COBALT_SERIAL_IRQ,
+ .uartclk = 18432000,
+ .iotype = UPIO_MEM,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .mapbase = 0x1c800000,
+ },
+ {},
+};
+
+static __init int cobalt_uart_add(void)
+{
+ struct platform_device *pdev;
+ int retval;
+
+ /*
+ * Cobalt Qube1 and RAQ1 have no UART.
+ */
+ if (cobalt_board_id <= COBALT_BRD_ID_RAQ1)
+ return 0;
+
+ pdev = platform_device_alloc("serial8250", -1);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = PLAT8250_DEV_PLATFORM;
+ pdev->dev.platform_data = cobalt_serial8250_port;
+
+ retval = platform_device_add_resources(pdev, cobalt_uart_resource, ARRAY_SIZE(cobalt_uart_resource));
+ if (retval)
+ goto err_free_device;
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto err_free_device;
+
+ return 0;
+
+err_free_device:
+ platform_device_put(pdev);
+
+ return retval;
+}
+device_initcall(cobalt_uart_add);
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index d0dd817..7abe45e 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -10,11 +10,8 @@
*
*/
#include <linux/interrupt.h>
-#include <linux/pci.h>
#include <linux/init.h>
#include <linux/pm.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
@@ -27,9 +24,6 @@
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
extern void cobalt_machine_power_off(void);
-extern void cobalt_early_console(void);
-
-int cobalt_board_id;
const char *get_system_type(void)
{
@@ -95,8 +89,6 @@
void __init plat_mem_setup(void)
{
- static struct uart_port uart;
- unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
int i;
_machine_restart = cobalt_machine_restart;
@@ -111,29 +103,6 @@
/* These resources have been reserved by VIA SuperI/O chip. */
for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
request_resource(&ioport_resource, cobalt_reserved_resources + i);
-
- /* Read the cobalt id register out of the PCI config space */
- PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
- cobalt_board_id = GT_READ(GT_PCI0_CFGDATA_OFS);
- cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
- cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
-
- printk("Cobalt board ID: %d\n", cobalt_board_id);
-
- if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
-#ifdef CONFIG_SERIAL_8250
- uart.line = 0;
- uart.type = PORT_UNKNOWN;
- uart.uartclk = 18432000;
- uart.irq = COBALT_SERIAL_IRQ;
- uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF |
- UPF_SKIP_TEST;
- uart.iotype = UPIO_MEM;
- uart.mapbase = 0x1c800000;
-
- early_serial_setup(&uart);
-#endif
- }
}
/*
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index ba593b5..631b213 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:24 2007
+# Linux kernel version: 2.6.21-rc7
+# Wed Apr 18 14:25:45 2007
#
CONFIG_MIPS=y
@@ -62,7 +62,6 @@
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_EARLY_PRINTK=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -74,12 +73,14 @@
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_I8259=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
-CONFIG_MIPS_GT64111=y
+CONFIG_PCI_GT64XXX_PCI0=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
@@ -179,6 +180,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -477,7 +479,6 @@
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -518,7 +519,7 @@
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
@@ -546,7 +547,6 @@
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -779,7 +779,8 @@
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
CONFIG_COBALT_LCD=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -815,6 +816,11 @@
# CONFIG_HWMON_VID is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -827,7 +833,7 @@
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
#
@@ -835,7 +841,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -894,7 +899,29 @@
#
# Real Time Clock
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 0db6a8b..10f6af4 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 162add9..4b08629 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 82801ec..820659e 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 545f230..4050b9b 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 5bd3b43..7b35190 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
deleted file mode 100644
index 083104d..0000000
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ /dev/null
@@ -1,897 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MOMENCO_JAGUAR_ATX=y
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_JAGUAR_DMALOW=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_LIMITED_DMA=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_MV64340=y
-CONFIG_PCI_MARVELL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_QLA3XXX=m
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 068e48e..1b364cf 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -80,7 +80,6 @@
CONFIG_MIPS_TX3927=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_TOSHIBA_BOARDS=y
#
# CPU selection
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 69678d9..37d696c 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 0706727..b11f0e8 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 354e49b..2927f38 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -9,6 +9,7 @@
# Machine selection
#
CONFIG_ZONE_DMA=y
+CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/rbhma4200_defconfig
similarity index 73%
rename from arch/mips/configs/ocelot_g_defconfig
rename to arch/mips/configs/rbhma4200_defconfig
index 7078e6b..35d6426 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/rbhma4200_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:36 2007
+# Linux kernel version: 2.6.21
+# Wed May 9 23:44:19 2007
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_PB1000 is not set
@@ -33,11 +32,9 @@
# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
-CONFIG_MOMENCO_OCELOT_G=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
@@ -60,8 +57,9 @@
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
+CONFIG_TOSHIBA_RBTX4927=y
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_TOSHIBA_FPCIB0 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -70,19 +68,15 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_I8259=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_PCI_MARVELL=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SWAP_IO_SPACE=y
-# CONFIG_SYSCLK_75 is not set
-# CONFIG_SYSCLK_83 is not set
-CONFIG_SYSCLK_100=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
@@ -97,18 +91,19 @@
# CONFIG_CPU_VR41XX is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
+CONFIG_CPU_TX49XX=y
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_R10000 is not set
-CONFIG_CPU_RM7000=y
+# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM7000=y
+CONFIG_SYS_HAS_CPU_TX49XX=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
@@ -121,19 +116,15 @@
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -143,17 +134,17 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -183,34 +174,42 @@
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# Block layer
@@ -218,7 +217,7 @@
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -238,17 +237,12 @@
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
@@ -260,10 +254,7 @@
#
# Power management options
#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
#
# Networking
@@ -273,25 +264,21 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
@@ -299,19 +286,19 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -352,13 +339,16 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -369,18 +359,12 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
#
@@ -401,21 +385,24 @@
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
-CONFIG_SGI_IOC4=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -425,7 +412,7 @@
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=y
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
@@ -471,27 +458,13 @@
#
# PHY device support
#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GALILEO_64240_ETH=y
+# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -503,6 +476,7 @@
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+CONFIG_NE2000=y
# CONFIG_NET_PCI is not set
#
@@ -521,18 +495,18 @@
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
+# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
+# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
@@ -540,9 +514,10 @@
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
# Wan interfaces
@@ -570,29 +545,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -601,34 +554,31 @@
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_TXX9=y
+CONFIG_HAS_TXX9_SERIAL=y
+CONFIG_SERIAL_TXX9_NR_UARTS=6
+CONFIG_SERIAL_TXX9_CONSOLE=y
+CONFIG_SERIAL_TXX9_STDSERIAL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
@@ -656,10 +606,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -672,12 +619,12 @@
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -692,15 +639,14 @@
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Console display driver support
+# Display device support
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
#
# Sound
@@ -708,11 +654,6 @@
# CONFIG_SOUND is not set
#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -728,10 +669,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -759,7 +696,40 @@
#
# Real Time Clock
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_DS1742=y
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
#
# DMA Engine support
@@ -785,9 +755,7 @@
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
@@ -801,10 +769,10 @@
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
@@ -824,21 +792,20 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -855,17 +822,17 @@
# Network File Systems
#
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
+# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -889,10 +856,7 @@
#
# Distributed Lock Manager
#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
#
# Profiling support
@@ -910,72 +874,29 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index 7d0f217..41011f7 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -89,7 +89,6 @@
CONFIG_SWAP_IO_SPACE=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_TOSHIBA_BOARDS=y
#
# CPU selection
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0219_defconfig
similarity index 98%
rename from arch/mips/configs/tb0229_defconfig
rename to arch/mips/configs/tb0219_defconfig
index 1756d2b..8b1675c 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:41 2007
+# Linux kernel version: 2.6.21-rc6
+# Sun Apr 15 01:06:01 2007
#
CONFIG_MIPS=y
@@ -66,10 +66,11 @@
# CONFIG_IBM_WORKPAD is not set
# CONFIG_NEC_CMBVR4133 is not set
CONFIG_TANBAC_TB022X=y
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0287 is not set
# CONFIG_VICTOR_MPC30X is not set
# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_TANBAC_TB0219=y
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_TANBAC_TB0287 is not set
CONFIG_PCI_VR41XX=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -184,6 +185,7 @@
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
@@ -375,7 +377,7 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -415,7 +417,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -646,7 +647,7 @@
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_TANBAC_TB0219=y
+CONFIG_GPIO_TB0219=y
# CONFIG_DRM is not set
CONFIG_GPIO_VR41XX=y
# CONFIG_RAW_DRIVER is not set
@@ -679,6 +680,11 @@
# CONFIG_HWMON_VID is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -692,7 +698,7 @@
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
#
@@ -700,7 +706,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -831,6 +836,7 @@
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
index 4fa54b2..9dccfa4 100644
--- a/arch/mips/kernel/early_printk.c
+++ b/arch/mips/kernel/early_printk.c
@@ -12,7 +12,8 @@
extern void prom_putchar(char);
-static void early_console_write(struct console *con, const char *s, unsigned n)
+static void __init
+early_console_write(struct console *con, const char *s, unsigned n)
{
while (n-- && *s) {
if (*s == '\n')
@@ -22,14 +23,20 @@
}
}
-static struct console early_console = {
+static struct console early_console __initdata = {
.name = "early",
.write = early_console_write,
.flags = CON_PRINTBUFFER | CON_BOOT,
.index = -1
};
+static int early_console_initialized __initdata;
+
void __init setup_early_printk(void)
{
+ if (early_console_initialized)
+ return;
+ early_console_initialized = 1;
+
register_console(&early_console);
}
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 2967537..410868b 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -132,11 +132,11 @@
};
-void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq)
+void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqmap_t *imp, int nirq)
{
extern void (*board_bind_eic_interrupt)(unsigned int irq, unsigned int regset);
- _icctrl_msc = (unsigned long) ioremap (MIPS_MSC01_IC_REG_BASE, 0x40000);
+ _icctrl_msc = (unsigned long) ioremap (icubase, 0x40000);
/* Reset interrupt controller - initialises all registers to 0 */
MSCIC_WRITE(MSC01_IC_RST, MSC01_IC_RST_RST_BIT);
@@ -148,14 +148,14 @@
switch (imp->im_type) {
case MSC01_IRQ_EDGE:
- set_irq_chip(base+n, &msc_edgeirq_type);
+ set_irq_chip(irqbase+n, &msc_edgeirq_type);
if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
break;
case MSC01_IRQ_LEVEL:
- set_irq_chip(base+n, &msc_levelirq_type);
+ set_irq_chip(irqbase+n, &msc_levelirq_type);
if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
else
@@ -163,7 +163,7 @@
}
}
- irq_base = base;
+ irq_base = irqbase;
MSCIC_WRITE(MSC01_IC_GENA, MSC01_IC_GENA_GENA_BIT); /* Enable interrupt generation */
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 2fe4c86..aeded6c 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -28,7 +28,7 @@
static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
-int __devinit allocate_irqno(void)
+int allocate_irqno(void)
{
int irq;
@@ -59,7 +59,7 @@
BUG_ON(test_and_set_bit(i, irq_map));
}
-void __devinit free_irqno(unsigned int irq)
+void free_irqno(unsigned int irq)
{
smp_mb__before_clear_bit();
clear_bit(irq, irq_map);
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index e5e56bd..751b4a1 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -306,7 +306,7 @@
struct clocksource clocksource_mips = {
.name = "MIPS",
- .mask = 0xffffffff,
+ .mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index ff45a4b..200de02 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -927,9 +927,9 @@
(regs->cp0_cause & 0x7f) >> 2);
}
-asmlinkage void do_default_vi(struct pt_regs *regs)
+static asmlinkage void do_default_vi(void)
{
- show_regs(regs);
+ show_regs(get_irq_regs());
panic("Caught unexpected vectored interrupt.");
}
@@ -1128,7 +1128,7 @@
clear_bit(set, &sr->sr_allocated);
}
-static void *set_vi_srs_handler(int n, void *addr, int srs)
+static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
{
unsigned long handler;
unsigned long old_handler = vi_handlers[n];
@@ -1217,7 +1217,7 @@
return (void *)old_handler;
}
-void *set_vi_handler(int n, void *addr)
+void *set_vi_handler(int n, vi_handler_t addr)
{
return set_vi_srs_handler(n, addr, 0);
}
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index d7d3b14..5dad13e 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -9,4 +9,4 @@
obj-$(CONFIG_PCI) += iomap-pci.o
# libgcc-style stuff needed in the kernel
-lib-y += ashldi3.o ashrdi3.o lshrdi3.o
+lib-y += ashldi3.o ashrdi3.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/lib/ucmpdi2.c b/arch/mips/lib/ucmpdi2.c
new file mode 100644
index 0000000..e9ff258
--- /dev/null
+++ b/arch/mips/lib/ucmpdi2.c
@@ -0,0 +1,19 @@
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+word_type __ucmpdi2 (unsigned long a, unsigned long b)
+{
+ const DWunion au = {.ll = a};
+ const DWunion bu = {.ll = b};
+
+ if ((unsigned int) au.s.high < (unsigned int) bu.s.high)
+ return 0;
+ else if ((unsigned int) au.s.high > (unsigned int) bu.s.high)
+ return 2;
+ if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+ return 0;
+ else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+ return 2;
+ return 1;
+}
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index 83d7602..1cd830e 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -311,16 +311,21 @@
if (!cpu_has_veic)
mips_cpu_irq_init();
- switch(mips_revision_corid) {
- case MIPS_REVISION_CORID_CORE_MSC:
- case MIPS_REVISION_CORID_CORE_FPGA2:
- case MIPS_REVISION_CORID_CORE_FPGA3:
- case MIPS_REVISION_CORID_CORE_24K:
- case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ switch(mips_revision_sconid) {
+ case MIPS_REVISION_SCON_SOCIT:
+ case MIPS_REVISION_SCON_ROCIT:
if (cpu_has_veic)
- init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+ init_msc_irqs (MIPS_MSC01_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
else
- init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+ init_msc_irqs (MIPS_MSC01_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
+ break;
+
+ case MIPS_REVISION_SCON_SOCITSC:
+ case MIPS_REVISION_SCON_SOCITSCP:
+ if (cpu_has_veic)
+ init_msc_irqs (MIPS_SOCITSC_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
+ else
+ init_msc_irqs (MIPS_SOCITSC_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
}
if (cpu_has_veic) {
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 675502a..10dd2af 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -80,7 +80,6 @@
pagefault_enable();
}
-#ifndef CONFIG_LIMITED_DMA
/*
* This is the same as kmap_atomic() but can map memory that doesn't
* have a struct page associated with it.
@@ -99,7 +98,6 @@
return (void*) vaddr;
}
-#endif /* CONFIG_LIMITED_DMA */
struct page *__kmap_atomic_to_page(void *ptr)
{
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 2d1c2c0..4c80528 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -424,9 +424,6 @@
continue;
}
ClearPageReserved(page);
-#ifdef CONFIG_LIMITED_DMA
- set_page_address(page, lowmem_page_address(page));
-#endif
init_page_count(page);
__free_page(page);
totalhigh_pages++;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 492c518..e714929 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -35,24 +35,24 @@
#include <asm/smp.h>
#include <asm/war.h>
-static __init int __attribute__((unused)) r45k_bvahwbug(void)
+static __init int __maybe_unused r45k_bvahwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
return 0;
}
-static __init int __attribute__((unused)) r4k_250MHZhwbug(void)
+static __init int __maybe_unused r4k_250MHZhwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
return 0;
}
-static __init int __attribute__((unused)) bcm1250_m3_war(void)
+static __init int __maybe_unused bcm1250_m3_war(void)
{
return BCM1250_M3_WAR;
}
-static __init int __attribute__((unused)) r10000_llsc_war(void)
+static __init int __maybe_unused r10000_llsc_war(void)
{
return R10000_LLSC_WAR;
}
@@ -511,18 +511,18 @@
#define i_ehb(buf) i_sll(buf, 0, 0, 3)
#ifdef CONFIG_64BIT
-static __init int __attribute__((unused)) in_compat_space_p(long addr)
+static __init int __maybe_unused in_compat_space_p(long addr)
{
/* Is this address in 32bit compat space? */
return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L);
}
-static __init int __attribute__((unused)) rel_highest(long val)
+static __init int __maybe_unused rel_highest(long val)
{
return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
}
-static __init int __attribute__((unused)) rel_higher(long val)
+static __init int __maybe_unused rel_higher(long val)
{
return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
}
@@ -556,8 +556,8 @@
i_lui(buf, rs, rel_hi(addr));
}
-static __init void __attribute__((unused)) i_LA(u32 **buf, unsigned int rs,
- long addr)
+static __init void __maybe_unused i_LA(u32 **buf, unsigned int rs,
+ long addr)
{
i_LA_mostly(buf, rs, addr);
if (rel_lo(addr))
@@ -636,8 +636,8 @@
move_labels(lab, first, end, off);
}
-static __init int __attribute__((unused)) insn_has_bdelay(struct reloc *rel,
- u32 *addr)
+static __init int __maybe_unused insn_has_bdelay(struct reloc *rel,
+ u32 *addr)
{
for (; rel->lab != label_invalid; rel++) {
if (rel->addr == addr
@@ -650,15 +650,15 @@
}
/* convenience functions for labeled branches */
-static void __init __attribute__((unused))
+static void __init __maybe_unused
il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bltz(p, reg, 0);
}
-static void __init __attribute__((unused)) il_b(u32 **p, struct reloc **r,
- enum label_id l)
+static void __init __maybe_unused il_b(u32 **p, struct reloc **r,
+ enum label_id l)
{
r_mips_pc16(r, *p, l);
i_b(p, 0);
@@ -671,7 +671,7 @@
i_beqz(p, reg, 0);
}
-static void __init __attribute__((unused))
+static void __init __maybe_unused
il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
@@ -692,7 +692,7 @@
i_bgezl(p, reg, 0);
}
-static void __init __attribute__((unused))
+static void __init __maybe_unused
il_bgez(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
@@ -810,7 +810,7 @@
*
* As if we MIPS hackers wouldn't know how to nop pipelines happy ...
*/
-static __init void __attribute__((unused)) build_tlb_probe_entry(u32 **p)
+static __init void __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_data.cputype) {
/* Found by experiment: R4600 v2.0 needs this, too. */
@@ -1098,7 +1098,7 @@
* TMP and PTR are scratch.
* TMP will be clobbered, PTR will hold the pgd entry.
*/
-static __init void __attribute__((unused))
+static __init void __maybe_unused
build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
{
long pgdc = (long)pgd_current;
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
deleted file mode 100644
index 70a61cf..0000000
--- a/arch/mips/momentum/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config JAGUAR_DMALOW
- bool "Low DMA Mode"
- depends on MOMENCO_JAGUAR_ATX
- help
- Select to Y if jump JP5 is set on your board, N otherwise. Normally
- the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile
deleted file mode 100644
index 2e8cebd..0000000
--- a/arch/mips/momentum/jaguar_atx/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for Momentum Computer's Jaguar-ATX board.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-obj-y += irq.o platform.o prom.o reset.o setup.o
-
-obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o
-obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
deleted file mode 100644
index b85a652..0000000
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ /dev/null
@@ -1,125 +0,0 @@
-
-#if defined(CONFIG_REMOTE_DEBUG)
-
-#include <asm/serial.h> /* For the serial port location and base baud */
-
-/* --- CONFIG --- */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [jsun] we use the second serial port for kdb */
-#define BASE OCELOT_SERIAL1_BASE
-#define MAX_BAUD OCELOT_BASE_BAUD
-
-/* === END OF CONFIG === */
-
-#define REG_OFFSET 4
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE (1*REG_OFFSET)
-#define OFS_INTR_ID (2*REG_OFFSET)
-#define OFS_DATA_FORMAT (3*REG_OFFSET)
-#define OFS_LINE_CONTROL (3*REG_OFFSET)
-#define OFS_MODEM_CONTROL (4*REG_OFFSET)
-#define OFS_RS232_OUTPUT (4*REG_OFFSET)
-#define OFS_LINE_STATUS (5*REG_OFFSET)
-#define OFS_MODEM_STATUS (6*REG_OFFSET)
-#define OFS_RS232_INPUT (6*REG_OFFSET)
-#define OFS_SCRATCH_PAD (7*REG_OFFSET)
-
-#define OFS_DIVISOR_LSB (0*REG_OFFSET)
-#define OFS_DIVISOR_MSB (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
-#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up baud rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_38400,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_38400,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
-
-#endif
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c
deleted file mode 100644
index f2b4325..0000000
--- a/arch/mips/momentum/jaguar_atx/irq.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2002 Momentum Computer, Inc.
- * Author: Matthew Dharm, mdharm@momenco.com
- *
- * Based on work by:
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/types.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/time.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status();
-
- if (pending & STATUSF_IP0)
- do_IRQ(0);
- else if (pending & STATUSF_IP1)
- do_IRQ(1);
- else if (pending & STATUSF_IP2)
- do_IRQ(2);
- else if (pending & STATUSF_IP3)
- do_IRQ(3);
- else if (pending & STATUSF_IP4)
- do_IRQ(4);
- else if (pending & STATUSF_IP5)
- do_IRQ(5);
- else if (pending & STATUSF_IP6)
- do_IRQ(6);
- else if (pending & STATUSF_IP7)
- ll_timer_interrupt(7);
- else {
- /*
- * Now look at the extended interrupts
- */
- pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
- if (pending & STATUSF_IP8)
- ll_mv64340_irq();
- }
-}
-
-static struct irqaction cascade_mv64340 = {
- no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
-};
-
-void __init arch_init_irq(void)
-{
- /*
- * Clear all of the interrupts while we change the able around a bit.
- * int-handler is not on bootstrap
- */
- clear_c0_status(ST0_IM);
-
- mips_cpu_irq_init();
- rm7k_cpu_irq_init();
-
- /* set up the cascading interrupts */
- setup_irq(8, &cascade_mv64340);
-
- mv64340_irq_init(16);
-
- set_c0_status(ST0_IM);
-}
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
deleted file mode 100644
index 2c30b4f..0000000
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001, 2002, 2004 Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/termios.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <asm/serial.h>
-
-/* SUPERIO uart register map */
-struct ja_uartregs {
- union {
- volatile u8 pad0[3];
- volatile u8 rbr; /* read only, DLAB == 0 */
- volatile u8 pad1[3];
- volatile u8 thr; /* write only, DLAB == 0 */
- volatile u8 pad2[3];
- volatile u8 dll; /* DLAB == 1 */
- } u1;
- union {
- volatile u8 pad0[3];
- volatile u8 ier; /* DLAB == 0 */
- volatile u8 pad1[3];
- volatile u8 dlm; /* DLAB == 1 */
- } u2;
- union {
- volatile u8 pad0[3];
- volatile u8 iir; /* read only */
- volatile u8 pad1[3];
- volatile u8 fcr; /* write only */
- } u3;
- volatile u8 pad0[3];
- volatile u8 iu_lcr;
- volatile u8 pad1[3];
- volatile u8 iu_mcr;
- volatile u8 pad2[3];
- volatile u8 iu_lsr;
- volatile u8 pad3[3];
- volatile u8 iu_msr;
- volatile u8 pad4[3];
- volatile u8 iu_scr;
-} ja_uregs_t;
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
-
-extern unsigned long uart_base;
-
-static inline struct ja_uartregs *console_uart(void)
-{
- return (struct ja_uartregs *) (uart_base + 0x23UL);
-}
-
-void prom_putchar(char c)
-{
- struct ja_uartregs *uart = console_uart();
-
- while ((uart->iu_lsr & 0x20) == 0);
- uart->iu_thr = c;
-}
-
-static void inline ja_console_probe(void)
-{
- struct uart_port up;
-
- /*
- * Register to interrupt zero because we share the interrupt with
- * the serial driver which we don't properly support yet.
- */
- memset(&up, 0, sizeof(up));
- up.membase = (unsigned char *) uart_base + 0x23UL;
- up.irq = JAGUAR_ATX_SERIAL1_IRQ;
- up.uartclk = JAGUAR_ATX_UART_CLK;
- up.regshift = 2;
- up.iotype = UPIO_MEM;
- up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- up.line = 0;
-
- if (early_serial_setup(&up))
- printk(KERN_ERR "Early serial init of port 0 failed\n");
-}
-
-__init void ja_setup_console(void)
-{
- ja_console_probe();
-}
diff --git a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
deleted file mode 100644
index 022f697..0000000
--- a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Jaguar-ATX Board Register Definitions
- *
- * (C) 2002 Momentum Computer Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __JAGUAR_ATX_FPGA_H__
-#define __JAGUAR_ATX_FPGA_H__
-
-#define JAGUAR_ATX_REG_BOARDREV 0x0
-#define JAGUAR_ATX_REG_FPGA_REV 0x1
-#define JAGUAR_ATX_REG_FPGA_TYPE 0x2
-#define JAGUAR_ATX_REG_RESET_STATUS 0x3
-#define JAGUAR_ATX_REG_BOARD_STATUS 0x4
-#define JAGUAR_ATX_REG_RESERVED1 0x5
-#define JAGUAR_ATX_REG_SET 0x6
-#define JAGUAR_ATX_REG_CLR 0x7
-#define JAGUAR_ATX_REG_EEPROM_MODE 0x9
-#define JAGUAR_ATX_REG_RESERVED2 0xa
-#define JAGUAR_ATX_REG_RESERVED3 0xb
-#define JAGUAR_ATX_REG_RESERVED4 0xc
-#define JAGUAR_ATX_REG_PHY_INTSTAT 0xd
-#define JAGUAR_ATX_REG_RESERVED5 0xe
-#define JAGUAR_ATX_REG_RESERVED6 0xf
-
-#define JAGUAR_ATX_CS0_ADDR 0xfc000000L
-
-extern unsigned long ja_fpga_base;
-
-#define __FPGA_REG_TO_ADDR(reg) \
- ((void *) ja_fpga_base + JAGUAR_ATX_REG_##reg)
-#define JAGUAR_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
-#define JAGUAR_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
-
-#endif
diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c
deleted file mode 100644
index 5618448..0000000
--- a/arch/mips/momentum/jaguar_atx/platform.c
+++ /dev/null
@@ -1,208 +0,0 @@
-#include <linux/delay.h>
-#include <linux/if_ether.h>
-#include <linux/ioport.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include "jaguar_atx_fpga.h"
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-
-static struct resource mv643xx_eth_shared_resources[] = {
- [0] = {
- .name = "ethernet shared base",
- .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
- .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
- MV643XX_ETH_SHARED_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device mv643xx_eth_shared_device = {
- .name = MV643XX_ETH_SHARED_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
- .resource = mv643xx_eth_shared_resources,
-};
-
-#define MV_SRAM_BASE 0xfe000000UL
-#define MV_SRAM_SIZE (256 * 1024)
-
-#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
-#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
-
-#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
-#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
-
-#define MV64x60_IRQ_ETH_0 48
-#define MV64x60_IRQ_ETH_1 49
-#define MV64x60_IRQ_ETH_2 50
-
-static struct resource mv64x60_eth0_resources[] = {
- [0] = {
- .name = "eth0 irq",
- .start = MV64x60_IRQ_ETH_0,
- .end = MV64x60_IRQ_ETH_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
- .port_number = 0,
-
- .tx_sram_addr = MV_SRAM_BASE_ETH0,
- .tx_sram_size = MV_SRAM_TXRING_SIZE,
- .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
-
- .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
- .rx_sram_size = MV_SRAM_RXRING_SIZE,
- .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth0_device = {
- .name = MV643XX_ETH_NAME,
- .id = 0,
- .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
- .resource = mv64x60_eth0_resources,
- .dev = {
- .platform_data = ð0_pd,
- },
-};
-
-static struct resource mv64x60_eth1_resources[] = {
- [0] = {
- .name = "eth1 irq",
- .start = MV64x60_IRQ_ETH_1,
- .end = MV64x60_IRQ_ETH_1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
- .port_number = 1,
-
- .tx_sram_addr = MV_SRAM_BASE_ETH1,
- .tx_sram_size = MV_SRAM_TXRING_SIZE,
- .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
-
- .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
- .rx_sram_size = MV_SRAM_RXRING_SIZE,
- .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth1_device = {
- .name = MV643XX_ETH_NAME,
- .id = 1,
- .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
- .resource = mv64x60_eth1_resources,
- .dev = {
- .platform_data = ð1_pd,
- },
-};
-
-static struct resource mv64x60_eth2_resources[] = {
- [0] = {
- .name = "eth2 irq",
- .start = MV64x60_IRQ_ETH_2,
- .end = MV64x60_IRQ_ETH_2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mv643xx_eth_platform_data eth2_pd = {
- .port_number = 2,
-};
-
-static struct platform_device eth2_device = {
- .name = MV643XX_ETH_NAME,
- .id = 2,
- .num_resources = ARRAY_SIZE(mv64x60_eth2_resources),
- .resource = mv64x60_eth2_resources,
- .dev = {
- .platform_data = ð2_pd,
- },
-};
-
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
- &mv643xx_eth_shared_device,
- ð0_device,
- ð1_device,
- ð2_device,
-};
-
-static u8 __init exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- udelay(1);
-
- /* turn the clock on */
- JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- udelay(1);
-
- /* turn the clock off and read-strobe */
- JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return (JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
-}
-
-static void __init get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-
-/*
- * Copy and increment ethernet MAC address by a small value.
- *
- * This is useful for systems where the only one MAC address is stored in
- * non-volatile memory for multiple ports.
- */
-static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
- unsigned int add)
-{
- int i;
-
- BUG_ON(add >= 256);
-
- for (i = ETH_ALEN; i >= 0; i--) {
- dst[i] = src[i] + add;
- add = dst[i] < src[i]; /* compute carry */
- }
-
- WARN_ON(add);
-}
-
-static int __init mv643xx_eth_add_pds(void)
-{
- unsigned char mac[ETH_ALEN];
- int ret;
-
- get_mac(mac);
- eth_mac_add(eth0_pd.mac_addr, mac, 0);
- eth_mac_add(eth1_pd.mac_addr, mac, 1);
- eth_mac_add(eth2_pd.mac_addr, mac, 2);
- ret = platform_add_devices(mv643xx_eth_pd_devs,
- ARRAY_SIZE(mv643xx_eth_pd_devs));
-
- return ret;
-}
-
-device_initcall(mv643xx_eth_add_pds);
-
-#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
deleted file mode 100644
index 5dd154e..0000000
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com [MIPS64 modifications]
- *
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Added changes for SMP - Manish Lachwani (lachwani@pmc-sierra.com)
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/mv643xx.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-
-#include "jaguar_atx_fpga.h"
-
-extern void ja_setup_console(void);
-
-struct callvectors *debug_vectors;
-
-extern unsigned long cpu_clock;
-
-const char *get_system_type(void)
-{
- return "Momentum Jaguar-ATX";
-}
-
-#ifdef CONFIG_64BIT
-
-unsigned long signext(unsigned long addr)
-{
- addr &= 0xffffffff;
- return (unsigned long)((int)addr);
-}
-
-void *get_arg(unsigned long args, int arc)
-{
- unsigned long ul;
- unsigned char *puc, uc;
-
- args += (arc * 4);
- ul = (unsigned long)signext(args);
- puc = (unsigned char *)ul;
- if (puc == 0)
- return (void *)0;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- uc = *puc++;
- l = (unsigned long)uc;
- uc = *puc++;
- ul |= (((unsigned long)uc) << 8);
- uc = *puc++;
- ul |= (((unsigned long)uc) << 16);
- uc = *puc++;
- ul |= (((unsigned long)uc) << 24);
-#else
- uc = *puc++;
- ul = ((unsigned long)uc) << 24;
- uc = *puc++;
- ul |= (((unsigned long)uc) << 16);
- uc = *puc++;
- ul |= (((unsigned long)uc) << 8);
- uc = *puc++;
- ul |= ((unsigned long)uc);
-#endif
- ul = signext(ul);
-
- return (void *)ul;
-}
-
-char *arg64(unsigned long addrin, int arg_index)
-{
- unsigned long args;
- char *p;
-
- args = signext(addrin);
- p = (char *)get_arg(args, arg_index);
-
- return p;
-}
-#endif /* CONFIG_64BIT */
-
-/* PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **arg = (char **) fw_arg1;
- char **env = (char **) fw_arg2;
- struct callvectors *cv = (struct callvectors *) fw_arg3;
- int i;
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-// ja_setup_console(); /* The very first thing. */
-#endif
-
-#ifdef CONFIG_64BIT
- char *ptr;
-
- printk("Mips64 Jaguar-ATX\n");
- /* save the PROM vectors for debugging use */
- debug_vectors = (struct callvectors *)signext((unsigned long)cv);
-
- /* arg[0] is "g", the rest is boot parameters */
- arcs_cmdline[0] = '\0';
-
- for (i = 1; i < argc; i++) {
- ptr = (char *)arg64((unsigned long)arg, i);
- if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
- sizeof(arcs_cmdline))
- break;
- strcat(arcs_cmdline, ptr);
- strcat(arcs_cmdline, " ");
- }
-
- i = 0;
- while (1) {
- ptr = (char *)arg64((unsigned long)env, i);
- if (! ptr)
- break;
-
- if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
- marvell_base = simple_strtol(ptr + strlen("gtbase="),
- NULL, 16);
-
- if ((marvell_base & 0xffffffff00000000) == 0)
- marvell_base |= 0xffffffff00000000;
-
- printk("marvell_base set to 0x%016lx\n", marvell_base);
- }
- if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
- cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
- NULL, 10);
- printk("cpu_clock set to %d\n", cpu_clock);
- }
- i++;
- }
- printk("arcs_cmdline: %s\n", arcs_cmdline);
-
-#else /* CONFIG_64BIT */
- /* save the PROM vectors for debugging use */
- debug_vectors = cv;
-
- /* arg[0] is "g", the rest is boot parameters */
- arcs_cmdline[0] = '\0';
- for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
- >= sizeof(arcs_cmdline))
- break;
- strcat(arcs_cmdline, arg[i]);
- strcat(arcs_cmdline, " ");
- }
-
- while (*env) {
- if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
- marvell_base = simple_strtol(*env + strlen("gtbase="),
- NULL, 16);
- }
- if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
- cpu_clock = simple_strtol(*env + strlen("cpuclock="),
- NULL, 10);
- }
- env++;
- }
-#endif /* CONFIG_64BIT */
- mips_machgroup = MACH_GROUP_MOMENCO;
- mips_machtype = MACH_MOMENCO_JAGUAR_ATX;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-}
-
-int prom_boot_secondary(int cpu, unsigned long sp, unsigned long gp)
-{
- /* Clear the semaphore */
- *(volatile uint32_t *)(0xbb000a68) = 0x80000000;
-
- return 1;
-}
-
-void prom_init_secondary(void)
-{
- clear_c0_config(CONF_CM_CMASK);
- set_c0_config(0x2);
-
- clear_c0_status(ST0_IM);
- set_c0_status(0x1ffff);
-}
-
-void prom_smp_finish(void)
-{
-}
diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c
deleted file mode 100644
index c73b089..0000000
--- a/arch/mips/momentum/jaguar_atx/reset.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com [MIPS64 modifications]
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-
-void momenco_jaguar_restart(char *command)
-{
- /* base address of timekeeper portion of part */
-#ifdef CONFIG_64BIT
- void *nvram = (void*) 0xfffffffffc807000;
-#else
- void *nvram = (void*) 0xfc807000;
-#endif
- /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
- writeb(0x84, nvram + 0xff7);
-
- /* wait for the watchdog to go off */
- mdelay(100+(1000/16));
-
- /* if the watchdog fails for some reason, let people know */
- printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-
-void momenco_jaguar_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-void momenco_jaguar_power_off(void)
-{
- momenco_jaguar_halt();
-}
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
deleted file mode 100644
index 5a51014..0000000
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Jaguar-ATX board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 2001, 04, 06 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: Matthew Dharm, Momentum Computer
- * mdharm@momenco.com
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com [MIPS64 modifications]
- *
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/vmalloc.h>
-#include <linux/mv643xx.h>
-
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/tlbflush.h>
-
-#include "jaguar_atx_fpga.h"
-
-extern unsigned long mv64340_sram_base;
-unsigned long cpu_clock;
-
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_jaguar_restart(char *command);
-extern void momenco_jaguar_halt(void);
-extern void momenco_jaguar_power_off(void);
-
-void momenco_time_init(void);
-
-static char reset_reason;
-
-static inline unsigned long ENTRYLO(unsigned long paddr)
-{
- return ((paddr & PAGE_MASK) |
- (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
- _CACHE_UNCACHED)) >> 6;
-}
-
-void __init bus_error_init(void) { /* nothing */ }
-
-/*
- * Load a few TLB entries for the MV64340 and perhiperals. The MV64340 is going
- * to be hit on every IRQ anyway - there's absolutely no point in letting it be
- * a random TLB entry, as it'll just cause needless churning of the TLB. And we
- * use the other half for the serial port, which is just a PITA otherwise :)
- *
- * Device Physical Virtual
- * MV64340 Internal Regs 0xf4000000 0xf4000000
- * Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000
- * NVRAM (CS1) 0xfc800000 0xfc800000
- * UARTs (CS2) 0xfd000000 0xfd000000
- * Internal SRAM 0xfe000000 0xfe000000
- * M-Systems DOC (CS3) 0xff000000 0xff000000
- */
-
-static __init void wire_stupidity_into_tlb(void)
-{
-#ifdef CONFIG_32BIT
- write_c0_wired(0);
- local_flush_tlb_all();
-
- /* marvell and extra space */
- add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
- 0xf4000000UL, PM_64K);
- /* fpga, rtc, and uart */
- add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000),
- 0xfc000000UL, PM_16M);
-// /* m-sys and internal SRAM */
-// add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
-// 0xfe000000UL, PM_16M);
-
- marvell_base = 0xf4000000;
- //mv64340_sram_base = 0xfe000000; /* Currently unused */
-#endif
-}
-
-unsigned long marvell_base = 0xf4000000L;
-unsigned long ja_fpga_base = JAGUAR_ATX_CS0_ADDR;
-unsigned long uart_base = 0xfd000000L;
-static unsigned char *rtc_base = (unsigned char*) 0xfc800000L;
-
-EXPORT_SYMBOL(marvell_base);
-
-static __init int per_cpu_mappings(void)
-{
- marvell_base = (unsigned long) ioremap(0xf4000000, 0x10000);
- ja_fpga_base = (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR, 0x1000);
- uart_base = (unsigned long) ioremap(0xfd000000UL, 0x1000);
- rtc_base = ioremap(0xfc000000UL, 0x8000);
- // ioremap(0xfe000000, 32 << 20);
- write_c0_wired(0);
- local_flush_tlb_all();
- ja_setup_console();
-
- return 0;
-}
-arch_initcall(per_cpu_mappings);
-
-unsigned long m48t37y_get_time(void)
-{
- unsigned int year, month, day, hour, min, sec;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- /* stop the update */
- rtc_base[0x7ff8] = 0x40;
-
- year = BCD2BIN(rtc_base[0x7fff]);
- year += BCD2BIN(rtc_base[0x7ff1]) * 100;
-
- month = BCD2BIN(rtc_base[0x7ffe]);
-
- day = BCD2BIN(rtc_base[0x7ffd]);
-
- hour = BCD2BIN(rtc_base[0x7ffb]);
- min = BCD2BIN(rtc_base[0x7ffa]);
- sec = BCD2BIN(rtc_base[0x7ff9]);
-
- /* start the update */
- rtc_base[0x7ff8] = 0x00;
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return mktime(year, month, day, hour, min, sec);
-}
-
-int m48t37y_set_time(unsigned long sec)
-{
- struct rtc_time tm;
- unsigned long flags;
-
- /* convert to a more useful format -- note months count from 0 */
- to_tm(sec, &tm);
- tm.tm_mon += 1;
-
- spin_lock_irqsave(&rtc_lock, flags);
- /* enable writing */
- rtc_base[0x7ff8] = 0x80;
-
- /* year */
- rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
- rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
-
- /* month */
- rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
-
- /* day */
- rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
-
- /* hour/min/sec */
- rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
- rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
- rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
-
- /* day of week -- not really used, but let's keep it up-to-date */
- rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
-
- /* disable writing */
- rtc_base[0x7ff8] = 0x00;
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- setup_irq(8, irq);
-}
-
-/*
- * Ugly but the least of all evils. TLB initialization did flush the TLB so
- * We need to setup mappings again before we can touch the RTC.
- */
-void momenco_time_init(void)
-{
- wire_stupidity_into_tlb();
-
- mips_hpt_frequency = cpu_clock / 2;
-
- rtc_mips_get_time = m48t37y_get_time;
- rtc_mips_set_time = m48t37y_set_time;
-}
-
-static struct resource mv_pci_io_mem0_resource = {
- .name = "MV64340 PCI0 IO MEM",
- .flags = IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem0_resource = {
- .name = "MV64340 PCI0 MEM",
- .flags = IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus0_controller = {
- .pcic = {
- .pci_ops = &mv_pci_ops,
- .mem_resource = &mv_pci_mem0_resource,
- .io_resource = &mv_pci_io_mem0_resource,
- },
- .config_addr = MV64340_PCI_0_CONFIG_ADDR,
- .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static uint32_t mv_io_base, mv_io_size;
-
-static void ja_pci0_init(void)
-{
- uint32_t mem0_base, mem0_size;
- uint32_t io_base, io_size;
-
- io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
- io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
- mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
- mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
-
- mv_pci_io_mem0_resource.start = 0;
- mv_pci_io_mem0_resource.end = io_size - 1;
- mv_pci_mem0_resource.start = mem0_base;
- mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
- mv_bus0_controller.pcic.mem_offset = mem0_base;
- mv_bus0_controller.pcic.io_offset = 0;
-
- ioport_resource.end = io_size - 1;
-
- register_pci_controller(&mv_bus0_controller.pcic);
-
- mv_io_base = io_base;
- mv_io_size = io_size;
-}
-
-static struct resource mv_pci_io_mem1_resource = {
- .name = "MV64340 PCI1 IO MEM",
- .flags = IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem1_resource = {
- .name = "MV64340 PCI1 MEM",
- .flags = IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus1_controller = {
- .pcic = {
- .pci_ops = &mv_pci_ops,
- .mem_resource = &mv_pci_mem1_resource,
- .io_resource = &mv_pci_io_mem1_resource,
- },
- .config_addr = MV64340_PCI_1_CONFIG_ADDR,
- .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static __init void ja_pci1_init(void)
-{
- uint32_t mem0_base, mem0_size;
- uint32_t io_base, io_size;
-
- io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
- io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
- mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
- mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
-
- /*
- * Here we assume the I/O window of second bus to be contiguous with
- * the first. A gap is no problem but would waste address space for
- * remapping the port space.
- */
- mv_pci_io_mem1_resource.start = mv_io_size;
- mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
- mv_pci_mem1_resource.start = mem0_base;
- mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
- mv_bus1_controller.pcic.mem_offset = mem0_base;
- mv_bus1_controller.pcic.io_offset = 0;
-
- ioport_resource.end = io_base + io_size -mv_io_base - 1;
-
- register_pci_controller(&mv_bus1_controller.pcic);
-
- mv_io_size = io_base + io_size - mv_io_base;
-}
-
-static __init int __init ja_pci_init(void)
-{
- unsigned long io_v_base;
- uint32_t enable;
-
- enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
-
- /*
- * We require at least one enabled I/O or PCI memory window or we
- * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3.
- */
- if (enable & (0x01 << 9) || enable & (0x01 << 10))
- ja_pci0_init();
-
- if (enable & (0x01 << 14) || enable & (0x01 << 15))
- ja_pci1_init();
-
- if (mv_io_size) {
- io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
- if (!io_v_base)
- panic("Could not ioremap I/O port range");
-
- set_io_port_base(io_v_base);
- }
-
- return 0;
-}
-
-arch_initcall(ja_pci_init);
-
-void __init plat_mem_setup(void)
-{
- unsigned int tmpword;
-
- board_time_init = momenco_time_init;
-
- _machine_restart = momenco_jaguar_restart;
- _machine_halt = momenco_jaguar_halt;
- pm_power_off = momenco_jaguar_power_off;
-
- /*
- * initrd_start = (unsigned long)jaguar_initrd_start;
- * initrd_end = (unsigned long)jaguar_initrd_start + (ulong)jaguar_initrd_size;
- * initrd_below_start_ok = 1;
- */
-
- wire_stupidity_into_tlb();
-
- /*
- * shut down ethernet ports, just to be sure our memory doesn't get
- * corrupted by random ethernet traffic.
- */
- MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
- MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
- MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
- MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
- MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
- MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
- while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
- while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
- while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
- while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
- while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
- while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
- MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
- MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
- MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
- MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
- MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2),
- MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
-
- /* Turn off the Bit-Error LED */
- JAGUAR_FPGA_WRITE(0x80, CLR);
-
- tmpword = JAGUAR_FPGA_READ(BOARDREV);
- if (tmpword < 26)
- printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n",
- 'A'+tmpword);
- else
- printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n",
- tmpword);
-
- tmpword = JAGUAR_FPGA_READ(FPGA_REV);
- printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
- tmpword = JAGUAR_FPGA_READ(RESET_STATUS);
- printk("Reset reason: 0x%x\n", tmpword);
- switch (tmpword) {
- case 0x1:
- printk(" - Power-up reset\n");
- break;
- case 0x2:
- printk(" - Push-button reset\n");
- break;
- case 0x8:
- printk(" - Watchdog reset\n");
- break;
- case 0x10:
- printk(" - JTAG reset\n");
- break;
- default:
- printk(" - Unknown reset cause\n");
- }
- reset_reason = tmpword;
- JAGUAR_FPGA_WRITE(0xff, RESET_STATUS);
-
- tmpword = JAGUAR_FPGA_READ(BOARD_STATUS);
- printk("Board Status register: 0x%02x\n", tmpword);
- printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
- printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
-
- /* 256MiB of RM9000x2 DDR */
-// add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
-
- /* 128MiB of MV-64340 DDR */
-// add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
-
- /* XXX Memory configuration should be picked up from PMON2k */
-#ifdef CONFIG_JAGUAR_DMALOW
- printk("Jaguar ATX DMA-low mode set\n");
- add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM);
- add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM);
-#else
- /* 128MiB of MV-64340 DDR RAM */
- printk("Jaguar ATX DMA-low mode is not set\n");
- add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
-#endif
-
-#ifdef GEMDEBUG_TRACEBUFFER
- {
- unsigned int tbControl;
- tbControl =
- 0 << 26 | /* post trigger delay 0 */
- 0x2 << 16 | /* sequential trace mode */
- // 0x0 << 16 | /* non-sequential trace mode */
- // 0xf << 4 | /* watchpoints disabled */
- 2 << 2 | /* armed */
- 2 ; /* interrupt disabled */
- printk ("setting tbControl = %08lx\n", tbControl);
- write_32bit_cp0_set1_register($22, tbControl);
- __asm__ __volatile__(".set noreorder\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- ".set reorder\n\t");
-
- }
-#endif
-}
diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile
deleted file mode 100644
index c0a0030..0000000
--- a/arch/mips/momentum/ocelot_g/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for Momentum Computer's Ocelot-G board.
-#
-
-obj-y += irq.o gt-irq.o prom.o reset.o setup.o
-obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
deleted file mode 100644
index 32d6fb4..0000000
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-#include <asm/serial.h> /* For the serial port location and base baud */
-
-/* --- CONFIG --- */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [jsun] we use the second serial port for kdb */
-#define BASE OCELOT_SERIAL1_BASE
-#define MAX_BAUD OCELOT_BASE_BAUD
-
-/* === END OF CONFIG === */
-
-#define REG_OFFSET 4
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE (1*REG_OFFSET)
-#define OFS_INTR_ID (2*REG_OFFSET)
-#define OFS_DATA_FORMAT (3*REG_OFFSET)
-#define OFS_LINE_CONTROL (3*REG_OFFSET)
-#define OFS_MODEM_CONTROL (4*REG_OFFSET)
-#define OFS_RS232_OUTPUT (4*REG_OFFSET)
-#define OFS_LINE_STATUS (5*REG_OFFSET)
-#define OFS_MODEM_STATUS (6*REG_OFFSET)
-#define OFS_RS232_INPUT (6*REG_OFFSET)
-#define OFS_SCRATCH_PAD (7*REG_OFFSET)
-
-#define OFS_DIVISOR_LSB (0*REG_OFFSET)
-#define OFS_DIVISOR_MSB (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
-#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up baud rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_38400,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_38400,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
deleted file mode 100644
index e5576bd..0000000
--- a/arch/mips/momentum/ocelot_g/gt-irq.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- *
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- *
- * arch/mips/momentum/ocelot_g/gt_irq.c
- * Interrupt routines for gt64240. Currently it only handles timer irq.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <asm/gt64240.h>
-#include <asm/io.h>
-
-unsigned long bus_clock;
-
-/*
- * These are interrupt handlers for the GT on-chip interrupts. They
- * all come in to the MIPS on a single interrupt line, and have to
- * be handled and ack'ed differently than other MIPS interrupts.
- */
-
-#if 0
-
-struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH];
-void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr);
-
-/*
- * Hooks IRQ handler to the system. When the system is interrupted
- * the interrupt service routine is called.
- *
- * Inputs :
- * int_cause - The interrupt cause number. In EVB64120 two parameters
- * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
- * bit_num - Indicates which bit number in the cause register
- * isr_ptr - Pointer to the interrupt service routine
- */
-void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr)
-{
- irq_handlers[int_cause][bit_num].routine = isr_ptr;
-}
-
-
-/*
- * Enables the IRQ on Galileo Chip
- *
- * Inputs :
- * int_cause - The interrupt cause number. In EVB64120 two parameters
- * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
- * bit_num - Indicates which bit number in the cause register
- *
- * Outputs :
- * 1 if successful, 0 if failure
- */
-int enable_galileo_irq(int int_cause, int bit_num)
-{
- if (int_cause == INT_CAUSE_MAIN)
- SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num));
- else if (int_cause == INT_CAUSE_HIGH)
- SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
- (1 << bit_num));
- else
- return 0;
-
- return 1;
-}
-
-/*
- * Disables the IRQ on Galileo Chip
- *
- * Inputs :
- * int_cause - The interrupt cause number. In EVB64120 two parameters
- * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
- * bit_num - Indicates which bit number in the cause register
- *
- * Outputs :
- * 1 if successful, 0 if failure
- */
-int disable_galileo_irq(int int_cause, int bit_num)
-{
- if (int_cause == INT_CAUSE_MAIN)
- RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER,
- (1 << bit_num));
- else if (int_cause == INT_CAUSE_HIGH)
- RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
- (1 << bit_num));
- else
- return 0;
- return 1;
-}
-#endif /* 0 */
-
-/*
- * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#.
- *
- * We route the timer interrupt to P0_INT# (IRQ 6), and that's all this
- * routine can handle, for now.
- *
- * In the future, we'll route more interrupts to this pin, and that's why
- * we keep this particular structure in the function.
- */
-
-static irqreturn_t gt64240_p0int_irq(int irq, void *dev)
-{
- uint32_t irq_src, irq_src_mask;
- int handled;
-
- /* get the low interrupt cause register */
- irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
-
- /* get the mask register for this pin */
- irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
-
- /* mask off only the interrupts we're interested in */
- irq_src = irq_src & irq_src_mask;
-
- handled = IRQ_NONE;
-
- /* Check for timer interrupt */
- if (irq_src & 0x00000100) {
- handled = IRQ_HANDLED;
- irq_src &= ~0x00000100;
-
- /* Clear any pending cause bits */
- MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
-
- /* handle the timer call */
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- }
-
- if (irq_src) {
- printk(KERN_INFO
- "UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n",
- irq_src);
- }
-
- return handled;
-}
-
-/*
- * Initializes timer using galileo's built in timer.
- */
-
-/*
- * This will ignore the standard MIPS timer interrupt handler
- * that is passed in as *irq (=irq0 in ../kernel/time.c).
- * We will do our own timer interrupt handling.
- */
-void gt64240_time_init(void)
-{
- static struct irqaction timer;
-
- /* Stop the timer -- we'll use timer #0 */
- MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
-
- /* Load timer value for 100 Hz */
- MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
-
- /*
- * Create the IRQ structure entry for the timer. Since we're too early
- * in the boot process to use the "request_irq()" call, we'll hard-code
- * the values to the correct interrupt line.
- */
- timer.handler = >64240_p0int_irq;
- timer.flags = IRQF_SHARED | IRQF_DISABLED;
- timer.name = "timer";
- timer.dev_id = NULL;
- timer.next = NULL;
- timer.mask = CPU_MASK_NONE;
- irq_desc[6].action = &timer;
-
- enable_irq(6);
-
- /* Clear any pending cause bits */
- MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
-
- /* Enable the interrupt for timer 0 */
- MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
-
- /* Enable the timer interrupt for GT-64240 pin P0_INT# */
- MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
-
- /* Configure and start the timer */
- MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
-}
-
-void gt64240_irq_init(void)
-{
-#if 0
- int i, j;
-
- /* Reset irq handlers pointers to NULL */
- for (i = 0; i < MAX_CAUSE_REGS; i++) {
- for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) {
- irq_handlers[i][j].next = NULL;
- irq_handlers[i][j].sync = 0;
- irq_handlers[i][j].routine = NULL;
- irq_handlers[i][j].data = NULL;
- }
- }
-#endif /* 0 */
-}
diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c
deleted file mode 100644
index 273541f..0000000
--- a/arch/mips/momentum/ocelot_g/irq.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status();
-
- if (pending & STATUSF_IP2)
- do_IRQ(2);
- else if (pending & STATUSF_IP3)
- do_IRQ(3);
- else if (pending & STATUSF_IP4)
- do_IRQ(4);
- else if (pending & STATUSF_IP5)
- do_IRQ(5);
- else if (pending & STATUSF_IP6)
- do_IRQ(6);
- else if (pending & STATUSF_IP7)
- do_IRQ(7);
- else {
- /*
- * Now look at the extended interrupts
- */
- pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
-
- if (pending & STATUSF_IP8)
- do_IRQ(8);
- else if (pending & STATUSF_IP9)
- do_IRQ(9);
- else if (pending & STATUSF_IP10)
- do_IRQ(10);
- else if (pending & STATUSF_IP11)
- do_IRQ(11);
- else
- spurious_interrupt();
- }
-}
-
-extern void gt64240_irq_init(void);
-
-void __init arch_init_irq(void)
-{
- /*
- * Clear all of the interrupts while we change the able around a bit.
- * int-handler is not on bootstrap
- */
- clear_c0_status(ST0_IM);
- local_irq_disable();
-
- mips_cpu_irq_init();
- rm7k_cpu_irq_init();
-
- gt64240_irq_init();
-}
diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h
deleted file mode 100644
index 95e0534..0000000
--- a/arch/mips/momentum/ocelot_g/ocelot_pld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Ocelot Board Register Definitions
- *
- * (C) 2001 Red Hat, Inc.
- *
- * GPL'd
- */
-#ifndef __MOMENCO_OCELOT_PLD_H__
-#define __MOMENCO_OCELOT_PLD_H__
-
-#define OCELOT_CS0_ADDR (0xfc000000)
-
-#define OCELOT_REG_BOARDREV (0)
-#define OCELOT_REG_PLD1_ID (1)
-#define OCELOT_REG_PLD2_ID (2)
-#define OCELOT_REG_RESET_STATUS (3)
-#define OCELOT_REG_BOARD_STATUS (4)
-#define OCELOT_REG_CPCI_ID (5)
-#define OCELOT_REG_I2C_CTRL (8)
-#define OCELOT_REG_EEPROM_MODE (9)
-#define OCELOT_REG_INTMASK (10)
-#define OCELOT_REG_INTSTATUS (11)
-#define OCELOT_REG_INTSET (12)
-#define OCELOT_REG_INTCLR (13)
-
-#define __PLD_REG_TO_ADDR(reg) ((void *) OCELOT_CS0_ADDR + OCELOT_REG_##reg)
-#define OCELOT_PLD_WRITE(x, reg) writeb(x, __PLD_REG_TO_ADDR(reg))
-#define OCELOT_PLD_READ(reg) readb(__PLD_REG_TO_ADDR(reg))
-
-#endif /* __MOMENCO_OCELOT_PLD_H__ */
diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c
deleted file mode 100644
index 836d083..0000000
--- a/arch/mips/momentum/ocelot_g/prom.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-#include <asm/gt64240.h>
-
-#include "ocelot_pld.h"
-
-struct callvectors* debug_vectors;
-
-extern unsigned long marvell_base;
-extern unsigned long bus_clock;
-
-#ifdef CONFIG_GALILEO_GT64240_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
-
-const char *get_system_type(void)
-{
- return "Momentum Ocelot";
-}
-
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **arg = (char **) fw_arg1;
- char **env = (char **) fw_arg2;
- struct callvectors *cv = (struct callvectors *) fw_arg3;
- int i;
-
- /* save the PROM vectors for debugging use */
- debug_vectors = cv;
-
- /* arg[0] is "g", the rest is boot parameters */
- arcs_cmdline[0] = '\0';
- for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
- >= sizeof(arcs_cmdline))
- break;
- strcat(arcs_cmdline, arg[i]);
- strcat(arcs_cmdline, " ");
- }
-
- mips_machgroup = MACH_GROUP_MOMENCO;
- mips_machtype = MACH_MOMENCO_OCELOT_G;
-
-#ifdef CONFIG_GALILEO_GT64240_ETH
- /* get the base MAC address for on-board ethernet ports */
- memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
-#endif
-
- while (*env) {
- if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
- marvell_base = simple_strtol(*env + strlen("gtbase="),
- NULL, 16);
- }
- if (strncmp("busclock", *env, strlen("busclock")) == 0) {
- bus_clock = simple_strtol(*env + strlen("busclock="),
- NULL, 10);
- }
- env++;
- }
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/momentum/ocelot_g/reset.c b/arch/mips/momentum/ocelot_g/reset.c
deleted file mode 100644
index 3fd499a..0000000
--- a/arch/mips/momentum/ocelot_g/reset.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-
-void momenco_ocelot_restart(char *command)
-{
- void *nvram = ioremap_nocache(0x2c807000, 0x1000);
-
- if (!nvram) {
- printk(KERN_NOTICE "ioremap of reset register failed\n");
- return;
- }
- writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to
- assert reset in 1/16 second */
- mdelay(10+(1000/16));
- iounmap(nvram);
- printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-
-void momenco_ocelot_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-void momenco_ocelot_power_off(void)
-{
- momenco_ocelot_halt();
-}
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
deleted file mode 100644
index 9db638a..0000000
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 2001 Ralf Baechle
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: Matthew Dharm, Momentum Computer
- * mdharm@momenco.com
- *
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/timex.h>
-#include <linux/vmalloc.h>
-
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/gt64240.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <linux/bootmem.h>
-
-#include "ocelot_pld.h"
-
-#ifdef CONFIG_GALILEO_GT64240_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
-
-unsigned long marvell_base;
-
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_ocelot_restart(char *command);
-extern void momenco_ocelot_halt(void);
-extern void momenco_ocelot_power_off(void);
-
-extern void gt64240_time_init(void);
-extern void momenco_ocelot_irq_setup(void);
-
-static char reset_reason;
-
-static unsigned long ENTRYLO(unsigned long paddr)
-{
- return ((paddr & PAGE_MASK) |
- (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
- _CACHE_UNCACHED)) >> 6;
-}
-
-/* setup code for a handoff from a version 2 PMON 2000 PROM */
-void PMON_v2_setup(void)
-{
- /* A wired TLB entry for the GT64240 and the serial port. The
- GT64240 is going to be hit on every IRQ anyway - there's
- absolutely no point in letting it be a random TLB entry, as
- it'll just cause needless churning of the TLB. And we use
- the other half for the serial port, which is just a PITA
- otherwise :)
-
- Device Physical Virtual
- GT64240 Internal Regs 0xf4000000 0xe0000000
- UARTs (CS2) 0xfd000000 0xe0001000
- */
- add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
- 0xf4000000, PM_64K);
- add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000),
- 0xfd000000, PM_4K);
-
- /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
- in the CS[012] region. We can't use ioremap() yet. The NVRAM
- is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
-
- Ocelot PLD (CS0) 0xfc000000 0xe0020000
- NVRAM (CS1) 0xfc800000 0xe0030000
- */
- add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000),
- 0xfc000000, PM_64K);
- add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000),
- 0xfc800000, PM_64K);
-
- marvell_base = 0xf4000000;
-}
-
-extern int rm7k_tcache_enabled;
-
-/*
- * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
- */
-#define Page_Invalidate_T 0x16
-static void __init setup_l3cache(unsigned long size)
-{
- int register i;
-
- printk("Enabling L3 cache...");
-
- /* Enable the L3 cache in the GT64120A's CPU Configuration register */
- MV_WRITE(0, MV_READ(0) | (1<<14));
-
- /* Enable the L3 cache in the CPU */
- set_c0_config(1<<12 /* CONF_TE */);
-
- /* Clear the cache */
- write_c0_taglo(0);
- write_c0_taghi(0);
-
- for (i=0; i < size; i+= 4096) {
- __asm__ __volatile__ (
- ".set noreorder\n\t"
- ".set mips3\n\t"
- "cache %1, (%0)\n\t"
- ".set mips0\n\t"
- ".set reorder"
- :
- : "r" (KSEG0ADDR(i)),
- "i" (Page_Invalidate_T));
- }
-
- /* Let the RM7000 MM code know that the tertiary cache is enabled */
- rm7k_tcache_enabled = 1;
-
- printk("Done\n");
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-}
-
-void __init plat_mem_setup(void)
-{
- void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
- unsigned int tmpword;
-
- board_time_init = gt64240_time_init;
-
- _machine_restart = momenco_ocelot_restart;
- _machine_halt = momenco_ocelot_halt;
- pm_power_off = momenco_ocelot_power_off;
-
- /*
- * initrd_start = (unsigned long)ocelot_initrd_start;
- * initrd_end = (unsigned long)ocelot_initrd_start + (ulong)ocelot_initrd_size;
- * initrd_below_start_ok = 1;
- */
-
- /* do handoff reconfiguration */
- PMON_v2_setup();
-
-#ifdef CONFIG_GALILEO_GT64240_ETH
- /* get the mac addr */
- memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
-#endif
-
- /* Turn off the Bit-Error LED */
- OCELOT_PLD_WRITE(0x80, INTCLR);
-
- tmpword = OCELOT_PLD_READ(BOARDREV);
- if (tmpword < 26)
- printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword);
- else
- printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword);
-
- tmpword = OCELOT_PLD_READ(PLD1_ID);
- printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
- tmpword = OCELOT_PLD_READ(PLD2_ID);
- printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
- tmpword = OCELOT_PLD_READ(RESET_STATUS);
- printk("Reset reason: 0x%x\n", tmpword);
- reset_reason = tmpword;
- OCELOT_PLD_WRITE(0xff, RESET_STATUS);
-
- tmpword = OCELOT_PLD_READ(BOARD_STATUS);
- printk("Board Status register: 0x%02x\n", tmpword);
- printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
- printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
- printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
- printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
- printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
-
- if (tmpword&12)
- l3func((1<<(((tmpword&12) >> 2)+20)));
-
- switch(tmpword &3) {
- case 3:
- /* 512MiB -- two banks of 256MiB */
- add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM);
-/*
- add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
-*/
- break;
- case 2:
- /* 256MiB -- two banks of 128MiB */
- add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM);
- add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
- break;
- case 1:
- /* 128MiB -- 64MiB per bank */
- add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
- add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
- break;
- case 0:
- /* 64MiB */
- add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
- break;
- }
-
- /* FIXME: Fix up the DiskOnChip mapping */
- MV_WRITE(0x468, 0xfef73);
-}
-
-/* This needs to be one of the first initcalls, because no I/O port access
- can work before this */
-
-static int io_base_ioremap(void)
-{
- /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
- unsigned long io_remap_range;
-
- io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000);
- if (!io_remap_range)
- panic("Could not ioremap I/O port range");
-
- set_io_port_base(io_remap_range - 0xc0000000);
-
- return 0;
-}
-
-module_init(io_base_ioremap);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index df487c0..aba3dbf 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -30,11 +30,9 @@
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
-obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o
obj-$(CONFIG_MOMENCO_OCELOT_C) += fixup-ocelot-c.o pci-ocelot-c.o
-obj-$(CONFIG_MOMENCO_OCELOT_G) += fixup-ocelot-g.o pci-ocelot-g.o
obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
pci-yosemite.o
obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 7d5f6bb..d57ffd7 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -17,9 +17,7 @@
#include <asm/io.h>
#include <asm/gt64120.h>
-#include <asm/mach-cobalt/cobalt.h>
-
-extern int cobalt_board_id;
+#include <cobalt.h>
static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
{
@@ -115,6 +113,27 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_fixup);
+int cobalt_board_id;
+
+static void qube_raq_via_board_id_fixup(struct pci_dev *dev)
+{
+ u8 id;
+ int retval;
+
+ retval = pci_read_config_byte(dev, VIA_COBALT_BRD_ID_REG, &id);
+ if (retval) {
+ panic("Cannot read board ID");
+ return;
+ }
+
+ cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(id);
+
+ printk(KERN_INFO "Cobalt board ID: %d\n", cobalt_board_id);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0,
+ qube_raq_via_board_id_fixup);
+
static char irq_tab_qube1[] __initdata = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ,
diff --git a/arch/mips/pci/fixup-jaguar.c b/arch/mips/pci/fixup-jaguar.c
deleted file mode 100644
index 6c5e1d4..0000000
--- a/arch/mips/pci/fixup-jaguar.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Marvell MV64340 interrupt fixup code.
- *
- * Marvell wants an NDA for their docs so this was written without
- * documentation. You've been warned.
- *
- * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mipsregs.h>
-
-/*
- * WARNING: Example of how _NOT_ to do it.
- */
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int bus = dev->bus->number;
-
- if (bus == 0 && slot == 1)
- return 3; /* PCI-X A */
- if (bus == 0 && slot == 2)
- return 4; /* PCI-X B */
- if (bus == 1 && slot == 1)
- return 5; /* PCI A */
- if (bus == 1 && slot == 2)
- return 6; /* PCI B */
-
-return 0;
- panic("Whooops in pcibios_map_irq");
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/fixup-ocelot-g.c b/arch/mips/pci/fixup-ocelot-g.c
deleted file mode 100644
index d7a652e..0000000
--- a/arch/mips/pci/fixup-ocelot-g.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int bus = dev->bus->number;
-
- if (bus == 0 && slot == 1) /* Intel 82543 Gigabit MAC */
- return 2; /* irq_nr is 2 for INT0 */
-
- if (bus == 0 && slot == 2) /* Intel 82543 Gigabit MAC */
- return 3; /* irq_nr is 3 for INT1 */
-
- if (bus == 1 && slot == 3) /* Intel 21555 bridge */
- return 5; /* irq_nr is 8 for INT6 */
-
- if (bus == 1 && slot == 4) /* PMC Slot */
- return 9; /* irq_nr is 9 for INT7 */
-
- return -1;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/pci-ocelot-g.c b/arch/mips/pci/pci-ocelot-g.c
deleted file mode 100644
index 1e34301..0000000
--- a/arch/mips/pci/pci-ocelot-g.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * This doesn't really fly - but I don't have a GT64240 system for testing.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/gt64240.h>
-
-/*
- * We assume these address ranges have been programmed into the GT-64240 by
- * the firmware. PMON in case of the Ocelot G does that. Note the size of
- * the I/O range is completly stupid; I/O mappings are limited to at most
- * 256 bytes by the PCI spec and deprecated; and just to make things worse
- * apparently many devices don't decode more than 64k of I/O space.
- */
-
-#define gt_io_size 0x20000000UL
-#define gt_io_base 0xe0000000UL
-
-static struct resource gt_pci_mem0_resource = {
- .name = "MV64240 PCI0 MEM",
- .start = 0xc0000000UL,
- .end = 0xcfffffffUL,
- .flags = IORESOURCE_MEM
-};
-
-static struct resource gt_pci_io_mem0_resource = {
- .name = "MV64240 PCI0 IO MEM",
- .start = 0xe0000000UL,
- .end = 0xefffffffUL,
- .flags = IORESOURCE_IO
-};
-
-static struct mv_pci_controller gt_bus0_controller = {
- .pcic = {
- .pci_ops = &mv_pci_ops,
- .mem_resource = >_pci_mem0_resource,
- .mem_offset = 0xc0000000UL,
- .io_resource = >_pci_io_mem0_resource,
- .io_offset = 0x00000000UL
- },
- .config_addr = PCI_0CONFIGURATION_ADDRESS,
- .config_vreg = PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
-};
-
-static struct resource gt_pci_mem1_resource = {
- .name = "MV64240 PCI1 MEM",
- .start = 0xd0000000UL,
- .end = 0xdfffffffUL,
- .flags = IORESOURCE_MEM
-};
-
-static struct resource gt_pci_io_mem1_resource = {
- .name = "MV64240 PCI1 IO MEM",
- .start = 0xf0000000UL,
- .end = 0xffffffffUL,
- .flags = IORESOURCE_IO
-};
-
-static struct mv_pci_controller gt_bus1_controller = {
- .pcic = {
- .pci_ops = &mv_pci_ops,
- .mem_resource = >_pci_mem1_resource,
- .mem_offset = 0xd0000000UL,
- .io_resource = >_pci_io_mem1_resource,
- .io_offset = 0x10000000UL
- },
- .config_addr = PCI_1CONFIGURATION_ADDRESS,
- .config_vreg = PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER,
-};
-
-static __init int __init ocelot_g_pci_init(void)
-{
- unsigned long io_v_base;
-
- if (gt_io_size) {
- io_v_base = (unsigned long) ioremap(gt_io_base, gt_io_size);
- if (!io_v_base)
- panic("Could not ioremap I/O port range");
-
- set_io_port_base(io_v_base);
- }
-
- register_pci_controller(>_bus0_controller.pcic);
- register_pci_controller(>_bus1_controller.pcic);
-
- return 0;
-}
-
-arch_initcall(ocelot_g_pci_init);
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index b6d6492..1fb3e35 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -4,6 +4,6 @@
#
obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \
- ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o
+ ip22-time.o ip22-nvram.o ip22-platform.o ip22-reset.o ip22-setup.o
obj-$(CONFIG_EISA) += ip22-eisa.o
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
new file mode 100644
index 0000000..78b608d
--- /dev/null
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -0,0 +1,177 @@
+#include <linux/init.h>
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/paccess.h>
+#include <asm/sgi/ip22.h>
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/mc.h>
+#include <asm/sgi/seeq.h>
+#include <asm/sgi/wd.h>
+
+static struct resource sgiwd93_0_resources[] = {
+ {
+ .name = "eth0 irq",
+ .start = SGI_WD93_0_IRQ,
+ .end = SGI_WD93_0_IRQ,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct sgiwd93_platform_data sgiwd93_0_pd = {
+ .unit = 0,
+ .irq = SGI_WD93_0_IRQ,
+};
+
+static struct platform_device sgiwd93_0_device = {
+ .name = "sgiwd93",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sgiwd93_0_resources),
+ .resource = sgiwd93_0_resources,
+ .dev = {
+ .platform_data = &sgiwd93_0_pd,
+ },
+};
+
+static struct resource sgiwd93_1_resources[] = {
+ {
+ .name = "eth0 irq",
+ .start = SGI_WD93_1_IRQ,
+ .end = SGI_WD93_1_IRQ,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct sgiwd93_platform_data sgiwd93_1_pd = {
+ .unit = 1,
+ .irq = SGI_WD93_1_IRQ,
+};
+
+static struct platform_device sgiwd93_1_device = {
+ .name = "sgiwd93",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sgiwd93_1_resources),
+ .resource = sgiwd93_1_resources,
+ .dev = {
+ .platform_data = &sgiwd93_1_pd,
+ },
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init sgiwd93_devinit(void)
+{
+ int res;
+
+ sgiwd93_0_pd.hregs = &hpc3c0->scsi_chan0;
+ sgiwd93_0_pd.wdregs = (unsigned char *) hpc3c0->scsi0_ext;
+
+ res = platform_device_register(&sgiwd93_0_device);
+ if (res)
+ return res;
+
+ if (!ip22_is_fullhouse())
+ return 0;
+
+ sgiwd93_1_pd.hregs = &hpc3c0->scsi_chan1;
+ sgiwd93_1_pd.wdregs = (unsigned char *) hpc3c0->scsi1_ext;
+
+ return platform_device_register(&sgiwd93_1_device);
+}
+
+device_initcall(sgiwd93_devinit);
+
+static struct resource sgiseeq_0_resources[] = {
+ {
+ .name = "eth0 irq",
+ .start = SGI_ENET_IRQ,
+ .end = SGI_ENET_IRQ,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct sgiseeq_platform_data eth0_pd;
+
+static struct platform_device eth0_device = {
+ .name = "sgiseeq",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sgiseeq_0_resources),
+ .resource = sgiseeq_0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+
+static struct resource sgiseeq_1_resources[] = {
+ {
+ .name = "eth1 irq",
+ .start = SGI_GIO_0_IRQ,
+ .end = SGI_GIO_0_IRQ,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct sgiseeq_platform_data eth1_pd;
+
+static struct platform_device eth1_device = {
+ .name = "sgiseeq",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sgiseeq_1_resources),
+ .resource = sgiseeq_1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init sgiseeq_devinit(void)
+{
+ unsigned int tmp;
+ int res, i;
+
+ eth0_pd.hpc = hpc3c0;
+ eth0_pd.irq = SGI_ENET_IRQ;
+#define EADDR_NVOFS 250
+ for (i = 0; i < 3; i++) {
+ unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i);
+
+ eth0_pd.mac[2 * i] = tmp >> 8;
+ eth0_pd.mac[2 * i + 1] = tmp & 0xff;
+ }
+
+ res = platform_device_register(ð0_device);
+ if (res)
+ return res;
+
+ /* Second HPC is missing? */
+ if (ip22_is_fullhouse() ||
+ !get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
+ return 0;
+
+ sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |
+ SGIMC_GIOPAR_HPC264;
+ hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
+ /* interrupt/config register on Challenge S Mezz board */
+ hpc3c1->pbus_extregs[0][0] = 0x30;
+
+ eth1_pd.hpc = hpc3c1;
+ eth1_pd.irq = SGI_GIO_0_IRQ;
+#define EADDR_NVOFS 250
+ for (i = 0; i < 3; i++) {
+ unsigned short tmp = ip22_eeprom_read(&hpc3c1->eeprom,
+ EADDR_NVOFS / 2 + i);
+
+ eth1_pd.mac[2 * i] = tmp >> 8;
+ eth1_pd.mac[2 * i + 1] = tmp & 0xff;
+ }
+
+ return platform_device_register(ð1_device);
+}
+
+device_initcall(sgiseeq_devinit);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ccc5410..56d3c0d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -389,6 +389,9 @@
bool
depends on 4xx || 8xx || E200
default y
+
+config CONFIG_CHECK_CACHE_COHERENCY
+ bool
endmenu
source "init/Kconfig"
@@ -451,7 +454,7 @@
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
- depends on PPC_MULTIPLATFORM && EXPERIMENTAL
+ depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 81a531d..d6014a6 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -148,7 +148,7 @@
CPPFLAGS_vmlinux.lds := -Upowerpc
-BOOT_TARGETS = zImage zImage.initrd uImage
+BOOT_TARGETS = zImage zImage.initrd zImage.dts zImage.dts_initrd uImage
PHONY += $(BOOT_TARGETS)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 5c384aa..d4f9fef 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -43,9 +43,9 @@
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c \
- 44x.c ebony.c
+ 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
- cuboot-ebony.c treeboot-ebony.c
+ cuboot-ebony.c treeboot-ebony.c prpmc2800.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -132,6 +132,7 @@
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += zImage.holly-elf
+image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
ifneq ($(CONFIG_DEVICE_TREE),"")
@@ -154,9 +155,27 @@
$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
+dts- := $(patsubst zImage%, zImage.dts%, $(image-n) $(image-))
+dts-y := $(patsubst zImage%, zImage.dts%, $(image-y))
+dts-y := $(filter-out $(image-y), $(dts-y))
+targets += $(image-y) $(dts-y)
+
+dts_initrd- := $(patsubst zImage%, zImage.dts_initrd%, $(image-n) $(image-))
+dts_initrd-y := $(patsubst zImage%, zImage.dts_initrd%, $(image-y))
+dts_initrd-y := $(filter-out $(image-y), $(dts_initrd-y))
+targets += $(image-y) $(dts_initrd-y)
+
+$(addprefix $(obj)/, $(dts_initrd-y)): $(obj)/ramdisk.image.gz
+
# Don't put the ramdisk on the pattern rule; when its missing make will try
# the pattern rule with less dependencies that also matches (even with the
# hard dependency listed).
+$(obj)/zImage.dts_initrd.%: vmlinux $(wrapperbits) $(dts) $(obj)/ramdisk.image.gz
+ $(call if_changed,wrap,$*,$(dts),,$(obj)/ramdisk.image.gz)
+
+$(obj)/zImage.dts.%: vmlinux $(wrapperbits) $(dts)
+ $(call if_changed,wrap,$*,$(dts))
+
$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
@@ -195,13 +214,18 @@
@rm -f $@; ln $< $@
$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
@rm -f $@; ln $< $@
+$(obj)/zImage.dts: $(addprefix $(obj)/, $(dts-y))
+ @rm -f $@; ln $< $@
+$(obj)/zImage.dts_initrd: $(addprefix $(obj)/, $(dts_initrd-y))
+ @rm -f $@; ln $< $@
+
install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
# anything not in $(targets)
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* \
- treeImage.*
+ treeImage.* zImage.dts zImage.dts_initrd
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c
index 6cbc20a..9af554e 100644
--- a/arch/powerpc/boot/cuboot-83xx.c
+++ b/arch/powerpc/boot/cuboot-83xx.c
@@ -57,7 +57,7 @@
memcpy(&bd, (bd_t *)r3, sizeof(bd));
loader_info.initrd_addr = r4;
- loader_info.initrd_size = r4 ? r5 : 0;
+ loader_info.initrd_size = r4 ? r5 - r4 : 0;
loader_info.cmdline = (char *)r6;
loader_info.cmdline_len = r7 - r6;
diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c
index f88ba00..e256031 100644
--- a/arch/powerpc/boot/cuboot-85xx.c
+++ b/arch/powerpc/boot/cuboot-85xx.c
@@ -58,7 +58,7 @@
memcpy(&bd, (bd_t *)r3, sizeof(bd));
loader_info.initrd_addr = r4;
- loader_info.initrd_size = r4 ? r5 : 0;
+ loader_info.initrd_size = r4 ? r5 - r4 : 0;
loader_info.cmdline = (char *)r6;
loader_info.cmdline_len = r7 - r6;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 93b7606..112dd51 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -146,7 +146,7 @@
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 90000000 0 10000000
+ ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 d0000000 0 00100000>;
clock-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 07bcc51..df773fa 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -223,7 +223,7 @@
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
+ ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
@@ -284,7 +284,7 @@
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
- 42000000 0 90000000 90000000 0 10000000
+ 42000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e2100000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
new file mode 100644
index 0000000..568965a
--- /dev/null
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -0,0 +1,315 @@
+/* Device Tree Source for Motorola PrPMC2800
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Property values that are labeled as "Default" will be updated by bootwrapper
+ * if it can determine the exact PrPMC type.
+ *
+ * To build:
+ * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts
+ * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "PrPMC280/PrPMC2800"; /* Default */
+ compatible = "motorola,PrPMC2800";
+ coherency-off;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,7447 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <2bb0b140>; /* Default (733 MHz) */
+ bus-frequency = <7f28155>; /* 133.333333 MHz */
+ timebase-frequency = <1fca055>; /* 33.333333 MHz */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 20000000>; /* Default (512MB) */
+ };
+
+ mv64x60@f1000000 { /* Marvell Discovery */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64x60";
+ clock-frequency = <7f28155>; /* 133.333333 MHz */
+ reg = <f1000000 00010000>;
+ virtual-reg = <f1000000>;
+ ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */
+ 80000000 80000000 08000000 /* PCI 0 MEM Space */
+ a0000000 a0000000 04000000 /* User FLASH */
+ 00000000 f1000000 00010000 /* Bridge's regs */
+ f2000000 f2000000 00040000>; /* Integrated SRAM */
+
+ flash@a0000000 {
+ device_type = "rom";
+ compatible = "direct-mapped";
+ reg = <a0000000 4000000>; /* Default (64MB) */
+ probe-type = "CFI";
+ bank-width = <4>;
+ partitions = <00000000 00100000 /* RO */
+ 00100000 00040001 /* RW */
+ 00140000 00400000 /* RO */
+ 00540000 039c0000 /* RO */
+ 03f00000 00100000>; /* RO */
+ partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64x60-mdio";
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <4c>; /* GPP 12 */
+ interrupt-parent = <&/mv64x60/pic>;
+ reg = <1>;
+ };
+ ethernet-phy@3 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <4c>; /* GPP 12 */
+ interrupt-parent = <&/mv64x60/pic>;
+ reg = <3>;
+ };
+ };
+
+ ethernet@2000 {
+ reg = <2000 2000>;
+ eth0 {
+ device_type = "network";
+ compatible = "marvell,mv64x60-eth";
+ block-index = <0>;
+ interrupts = <20>;
+ interrupt-parent = <&/mv64x60/pic>;
+ phy = <&/mv64x60/mdio/ethernet-phy@1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ eth1 {
+ device_type = "network";
+ compatible = "marvell,mv64x60-eth";
+ block-index = <1>;
+ interrupts = <21>;
+ interrupt-parent = <&/mv64x60/pic>;
+ phy = <&/mv64x60/mdio/ethernet-phy@3>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ sdma@4000 {
+ device_type = "dma";
+ compatible = "marvell,mv64x60-sdma";
+ reg = <4000 c18>;
+ virtual-reg = <f1004000>;
+ interrupt-base = <0>;
+ interrupts = <24>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ sdma@6000 {
+ device_type = "dma";
+ compatible = "marvell,mv64x60-sdma";
+ reg = <6000 c18>;
+ virtual-reg = <f1006000>;
+ interrupt-base = <0>;
+ interrupts = <26>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ brg@b200 {
+ compatible = "marvell,mv64x60-brg";
+ reg = <b200 8>;
+ clock-src = <8>;
+ clock-frequency = <7ed6b40>;
+ current-speed = <2580>;
+ bcr = <0>;
+ };
+
+ brg@b208 {
+ compatible = "marvell,mv64x60-brg";
+ reg = <b208 8>;
+ clock-src = <8>;
+ clock-frequency = <7ed6b40>;
+ current-speed = <2580>;
+ bcr = <0>;
+ };
+
+ cunit@f200 {
+ reg = <f200 200>;
+ };
+
+ mpscrouting@b400 {
+ reg = <b400 c>;
+ };
+
+ mpscintr@b800 {
+ reg = <b800 100>;
+ virtual-reg = <f100b800>;
+ };
+
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mpsc";
+ reg = <8000 38>;
+ virtual-reg = <f1008000>;
+ sdma = <&/mv64x60/sdma@4000>;
+ brg = <&/mv64x60/brg@b200>;
+ cunit = <&/mv64x60/cunit@f200>;
+ mpscrouting = <&/mv64x60/mpscrouting@b400>;
+ mpscintr = <&/mv64x60/mpscintr@b800>;
+ block-index = <0>;
+ max_idle = <28>;
+ chr_1 = <0>;
+ chr_2 = <0>;
+ chr_10 = <3>;
+ mpcr = <0>;
+ interrupts = <28>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ mpsc@9000 {
+ device_type = "serial";
+ compatible = "marvell,mpsc";
+ reg = <9000 38>;
+ virtual-reg = <f1009000>;
+ sdma = <&/mv64x60/sdma@6000>;
+ brg = <&/mv64x60/brg@b208>;
+ cunit = <&/mv64x60/cunit@f200>;
+ mpscrouting = <&/mv64x60/mpscrouting@b400>;
+ mpscintr = <&/mv64x60/mpscintr@b800>;
+ block-index = <1>;
+ max_idle = <28>;
+ chr_1 = <0>;
+ chr_2 = <0>;
+ chr_10 = <3>;
+ mpcr = <0>;
+ interrupts = <2a>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ i2c@c000 {
+ device_type = "i2c";
+ compatible = "marvell,mv64x60-i2c";
+ reg = <c000 20>;
+ virtual-reg = <f100c000>;
+ freq_m = <8>;
+ freq_n = <3>;
+ timeout = <3e8>; /* 1000 = 1 second */
+ retries = <1>;
+ interrupts = <25>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64x60-pic";
+ reg = <0000 88>;
+ interrupt-controller;
+ };
+
+ mpp@f000 {
+ compatible = "marvell,mv64x60-mpp";
+ reg = <f000 10>;
+ };
+
+ gpp@f100 {
+ compatible = "marvell,mv64x60-gpp";
+ reg = <f100 20>;
+ };
+
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64x60-pci";
+ reg = <0cf8 8>;
+ ranges = <01000000 0 0 88000000 0 01000000
+ 02000000 0 80000000 80000000 0 08000000>;
+ bus-range = <0 ff>;
+ clock-frequency = <3EF1480>;
+ interrupt-pci-iack = <0c34>;
+ interrupt-parent = <&/mv64x60/pic>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 5000 0 0 1 &/mv64x60/pic 50
+ 5000 0 0 2 &/mv64x60/pic 51
+ 5000 0 0 3 &/mv64x60/pic 5b
+ 5000 0 0 4 &/mv64x60/pic 5d
+
+ /* IDSEL 0x0b */
+ 5800 0 0 1 &/mv64x60/pic 5b
+ 5800 0 0 2 &/mv64x60/pic 5d
+ 5800 0 0 3 &/mv64x60/pic 50
+ 5800 0 0 4 &/mv64x60/pic 51
+
+ /* IDSEL 0x0c */
+ 6000 0 0 1 &/mv64x60/pic 5b
+ 6000 0 0 2 &/mv64x60/pic 5d
+ 6000 0 0 3 &/mv64x60/pic 50
+ 6000 0 0 4 &/mv64x60/pic 51
+
+ /* IDSEL 0x0d */
+ 6800 0 0 1 &/mv64x60/pic 5d
+ 6800 0 0 2 &/mv64x60/pic 50
+ 6800 0 0 3 &/mv64x60/pic 51
+ 6800 0 0 4 &/mv64x60/pic 5b
+ >;
+ };
+
+ cpu-error@0070 {
+ compatible = "marvell,mv64x60-cpu-error";
+ reg = <0070 10 0128 28>;
+ interrupts = <03>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64x60-sram-ctrl";
+ reg = <0380 80>;
+ interrupts = <0d>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ pci-error@1d40 {
+ compatible = "marvell,mv64x60-pci-error";
+ reg = <1d40 40 0c28 4>;
+ interrupts = <0c>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64x60-mem-ctrl";
+ reg = <1400 60>;
+ interrupts = <11>;
+ interrupt-parent = <&/mv64x60/pic>;
+ };
+ };
+
+ chosen {
+ bootargs = "ip=on console=ttyMM0";
+ linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+ };
+};
diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c
new file mode 100644
index 0000000..f1c0e96
--- /dev/null
+++ b/arch/powerpc/boot/mpsc.c
@@ -0,0 +1,170 @@
+/*
+ * MPSC/UART driver for the Marvell mv64360, mv64460, ...
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+
+extern void udelay(long delay);
+
+#define MPSC_CHR_1 0x000c
+
+#define MPSC_CHR_2 0x0010
+#define MPSC_CHR_2_TA (1<<7)
+#define MPSC_CHR_2_TCS (1<<9)
+#define MPSC_CHR_2_RA (1<<23)
+#define MPSC_CHR_2_CRD (1<<25)
+#define MPSC_CHR_2_EH (1<<31)
+
+#define MPSC_CHR_4 0x0018
+#define MPSC_CHR_4_Z (1<<29)
+
+#define MPSC_CHR_5 0x001c
+#define MPSC_CHR_5_CTL1_INTR (1<<12)
+#define MPSC_CHR_5_CTL1_VALID (1<<15)
+
+#define MPSC_CHR_10 0x0030
+
+#define MPSC_INTR_CAUSE 0x0000
+#define MPSC_INTR_CAUSE_RCC (1<<6)
+#define MPSC_INTR_MASK 0x0080
+
+#define SDMA_SDCM 0x0008
+#define SDMA_SDCM_AR (1<<15)
+#define SDMA_SDCM_AT (1<<31)
+
+static volatile char *mpsc_base;
+static volatile char *mpscintr_base;
+static u32 chr1, chr2;
+
+static int mpsc_open(void)
+{
+ chr1 = in_le32((u32 *)(mpsc_base + MPSC_CHR_1)) & 0x00ff0000;
+ chr2 = in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & ~(MPSC_CHR_2_TA
+ | MPSC_CHR_2_TCS | MPSC_CHR_2_RA | MPSC_CHR_2_CRD
+ | MPSC_CHR_2_EH);
+ out_le32((u32 *)(mpsc_base + MPSC_CHR_4), MPSC_CHR_4_Z);
+ out_le32((u32 *)(mpsc_base + MPSC_CHR_5),
+ MPSC_CHR_5_CTL1_INTR | MPSC_CHR_5_CTL1_VALID);
+ out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_EH);
+ return 0;
+}
+
+static void mpsc_putc(unsigned char c)
+{
+ while (in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & MPSC_CHR_2_TCS);
+
+ out_le32((u32 *)(mpsc_base + MPSC_CHR_1), chr1 | c);
+ out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_TCS);
+}
+
+static unsigned char mpsc_getc(void)
+{
+ u32 cause = 0;
+ unsigned char c;
+
+ while (!(cause & MPSC_INTR_CAUSE_RCC))
+ cause = in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE));
+
+ c = in_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2));
+ out_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2), c);
+ out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE),
+ cause & ~MPSC_INTR_CAUSE_RCC);
+
+ return c;
+}
+
+static u8 mpsc_tstc(void)
+{
+ return (u8)((in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE))
+ & MPSC_INTR_CAUSE_RCC) != 0);
+}
+
+static void mpsc_stop_dma(volatile char *sdma_base)
+{
+ out_le32((u32 *)(mpsc_base + MPSC_CHR_2),MPSC_CHR_2_TA | MPSC_CHR_2_RA);
+ out_le32((u32 *)(sdma_base + SDMA_SDCM), SDMA_SDCM_AR | SDMA_SDCM_AT);
+
+ while ((in_le32((u32 *)(sdma_base + SDMA_SDCM))
+ & (SDMA_SDCM_AR | SDMA_SDCM_AT)) != 0)
+ udelay(100);
+}
+
+static volatile char *mpsc_get_virtreg_of_phandle(void *devp, char *prop)
+{
+ void *v;
+ int n;
+
+ n = getprop(devp, prop, &v, sizeof(v));
+ if (n != sizeof(v))
+ goto err_out;
+
+ devp = find_node_by_linuxphandle((u32)v);
+ if (devp == NULL)
+ goto err_out;
+
+ n = getprop(devp, "virtual-reg", &v, sizeof(v));
+ if (n == sizeof(v))
+ return v;
+
+err_out:
+ return NULL;
+}
+
+int mpsc_console_init(void *devp, struct serial_console_data *scdp)
+{
+ void *v;
+ int n, reg_set;
+ volatile char *sdma_base;
+
+ n = getprop(devp, "virtual-reg", &v, sizeof(v));
+ if (n != sizeof(v))
+ goto err_out;
+ mpsc_base = v;
+
+ sdma_base = mpsc_get_virtreg_of_phandle(devp, "sdma");
+ if (sdma_base == NULL)
+ goto err_out;
+
+ mpscintr_base = mpsc_get_virtreg_of_phandle(devp, "mpscintr");
+ if (mpscintr_base == NULL)
+ goto err_out;
+
+ n = getprop(devp, "block-index", &v, sizeof(v));
+ if (n != sizeof(v))
+ goto err_out;
+ reg_set = (int)v;
+
+ mpscintr_base += (reg_set == 0) ? 0x4 : 0xc;
+
+ /* Make sure the mpsc ctlrs are shutdown */
+ out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0);
+ out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0);
+ out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0);
+ out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0);
+
+ mpsc_stop_dma(sdma_base);
+
+ scdp->open = mpsc_open;
+ scdp->putc = mpsc_putc;
+ scdp->getc = mpsc_getc;
+ scdp->tstc = mpsc_tstc;
+ scdp->close = NULL;
+
+ return 0;
+
+err_out:
+ return -1;
+}
diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c
new file mode 100644
index 0000000..b432594
--- /dev/null
+++ b/arch/powerpc/boot/mv64x60.c
@@ -0,0 +1,581 @@
+/*
+ * Marvell hostbridge routines
+ *
+ * Author: Mark A. Greer <source@mvista.com>
+ *
+ * 2004, 2005, 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "mv64x60.h"
+
+#define PCI_DEVFN(slot,func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+
+#define MV64x60_CPU2MEM_WINDOWS 4
+#define MV64x60_CPU2MEM_0_BASE 0x0008
+#define MV64x60_CPU2MEM_0_SIZE 0x0010
+#define MV64x60_CPU2MEM_1_BASE 0x0208
+#define MV64x60_CPU2MEM_1_SIZE 0x0210
+#define MV64x60_CPU2MEM_2_BASE 0x0018
+#define MV64x60_CPU2MEM_2_SIZE 0x0020
+#define MV64x60_CPU2MEM_3_BASE 0x0218
+#define MV64x60_CPU2MEM_3_SIZE 0x0220
+
+#define MV64x60_ENET2MEM_BAR_ENABLE 0x2290
+#define MV64x60_ENET2MEM_0_BASE 0x2200
+#define MV64x60_ENET2MEM_0_SIZE 0x2204
+#define MV64x60_ENET2MEM_1_BASE 0x2208
+#define MV64x60_ENET2MEM_1_SIZE 0x220c
+#define MV64x60_ENET2MEM_2_BASE 0x2210
+#define MV64x60_ENET2MEM_2_SIZE 0x2214
+#define MV64x60_ENET2MEM_3_BASE 0x2218
+#define MV64x60_ENET2MEM_3_SIZE 0x221c
+#define MV64x60_ENET2MEM_4_BASE 0x2220
+#define MV64x60_ENET2MEM_4_SIZE 0x2224
+#define MV64x60_ENET2MEM_5_BASE 0x2228
+#define MV64x60_ENET2MEM_5_SIZE 0x222c
+#define MV64x60_ENET2MEM_ACC_PROT_0 0x2294
+#define MV64x60_ENET2MEM_ACC_PROT_1 0x2298
+#define MV64x60_ENET2MEM_ACC_PROT_2 0x229c
+
+#define MV64x60_MPSC2MEM_BAR_ENABLE 0xf250
+#define MV64x60_MPSC2MEM_0_BASE 0xf200
+#define MV64x60_MPSC2MEM_0_SIZE 0xf204
+#define MV64x60_MPSC2MEM_1_BASE 0xf208
+#define MV64x60_MPSC2MEM_1_SIZE 0xf20c
+#define MV64x60_MPSC2MEM_2_BASE 0xf210
+#define MV64x60_MPSC2MEM_2_SIZE 0xf214
+#define MV64x60_MPSC2MEM_3_BASE 0xf218
+#define MV64x60_MPSC2MEM_3_SIZE 0xf21c
+#define MV64x60_MPSC_0_REMAP 0xf240
+#define MV64x60_MPSC_1_REMAP 0xf244
+#define MV64x60_MPSC2MEM_ACC_PROT_0 0xf254
+#define MV64x60_MPSC2MEM_ACC_PROT_1 0xf258
+#define MV64x60_MPSC2REGS_BASE 0xf25c
+
+#define MV64x60_IDMA2MEM_BAR_ENABLE 0x0a80
+#define MV64x60_IDMA2MEM_0_BASE 0x0a00
+#define MV64x60_IDMA2MEM_0_SIZE 0x0a04
+#define MV64x60_IDMA2MEM_1_BASE 0x0a08
+#define MV64x60_IDMA2MEM_1_SIZE 0x0a0c
+#define MV64x60_IDMA2MEM_2_BASE 0x0a10
+#define MV64x60_IDMA2MEM_2_SIZE 0x0a14
+#define MV64x60_IDMA2MEM_3_BASE 0x0a18
+#define MV64x60_IDMA2MEM_3_SIZE 0x0a1c
+#define MV64x60_IDMA2MEM_4_BASE 0x0a20
+#define MV64x60_IDMA2MEM_4_SIZE 0x0a24
+#define MV64x60_IDMA2MEM_5_BASE 0x0a28
+#define MV64x60_IDMA2MEM_5_SIZE 0x0a2c
+#define MV64x60_IDMA2MEM_6_BASE 0x0a30
+#define MV64x60_IDMA2MEM_6_SIZE 0x0a34
+#define MV64x60_IDMA2MEM_7_BASE 0x0a38
+#define MV64x60_IDMA2MEM_7_SIZE 0x0a3c
+#define MV64x60_IDMA2MEM_ACC_PROT_0 0x0a70
+#define MV64x60_IDMA2MEM_ACC_PROT_1 0x0a74
+#define MV64x60_IDMA2MEM_ACC_PROT_2 0x0a78
+#define MV64x60_IDMA2MEM_ACC_PROT_3 0x0a7c
+
+#define MV64x60_PCI_ACC_CNTL_WINDOWS 6
+#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c
+#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc
+
+#define MV64x60_PCI0_BAR_ENABLE 0x0c3c
+#define MV64x60_PCI02MEM_0_SIZE 0x0c08
+#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00
+#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04
+#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08
+#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10
+#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14
+#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18
+#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20
+#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24
+#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28
+#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30
+#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34
+#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38
+#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40
+#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44
+#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48
+#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50
+#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54
+#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58
+
+#define MV64x60_PCI1_BAR_ENABLE 0x0cbc
+#define MV64x60_PCI12MEM_0_SIZE 0x0c88
+#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80
+#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84
+#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88
+#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90
+#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94
+#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98
+#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0
+#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4
+#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8
+#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0
+#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4
+#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8
+#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0
+#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4
+#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8
+#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0
+#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4
+#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8
+
+#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000
+
+#define MV64x60_CPU2PCI0_IO_BASE 0x0048
+#define MV64x60_CPU2PCI0_IO_SIZE 0x0050
+#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0
+#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058
+#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060
+#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8
+#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320
+
+#define MV64x60_CPU2PCI1_IO_BASE 0x0090
+#define MV64x60_CPU2PCI1_IO_SIZE 0x0098
+#define MV64x60_CPU2PCI1_IO_REMAP 0x0108
+#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0
+#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8
+#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110
+#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340
+
+struct mv64x60_mem_win {
+ u32 hi;
+ u32 lo;
+ u32 size;
+};
+
+struct mv64x60_pci_win {
+ u32 fcn;
+ u32 hi;
+ u32 lo;
+ u32 size;
+};
+
+/* PCI config access routines */
+struct {
+ u32 addr;
+ u32 data;
+} static mv64x60_pci_cfgio[2] = {
+ { /* hose 0 */
+ .addr = 0xcf8,
+ .data = 0xcfc,
+ },
+ { /* hose 1 */
+ .addr = 0xc78,
+ .data = 0xc7c,
+ }
+};
+
+u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset)
+{
+ out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr),
+ (1 << 31) | (bus << 16) | (devfn << 8) | offset);
+ return in_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data));
+}
+
+void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset,
+ u32 val)
+{
+ out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr),
+ (1 << 31) | (bus << 16) | (devfn << 8) | offset);
+ out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data), val);
+}
+
+/* I/O ctlr -> system memory setup */
+static struct mv64x60_mem_win mv64x60_cpu2mem[MV64x60_CPU2MEM_WINDOWS] = {
+ {
+ .lo = MV64x60_CPU2MEM_0_BASE,
+ .size = MV64x60_CPU2MEM_0_SIZE,
+ },
+ {
+ .lo = MV64x60_CPU2MEM_1_BASE,
+ .size = MV64x60_CPU2MEM_1_SIZE,
+ },
+ {
+ .lo = MV64x60_CPU2MEM_2_BASE,
+ .size = MV64x60_CPU2MEM_2_SIZE,
+ },
+ {
+ .lo = MV64x60_CPU2MEM_3_BASE,
+ .size = MV64x60_CPU2MEM_3_SIZE,
+ },
+};
+
+static struct mv64x60_mem_win mv64x60_enet2mem[MV64x60_CPU2MEM_WINDOWS] = {
+ {
+ .lo = MV64x60_ENET2MEM_0_BASE,
+ .size = MV64x60_ENET2MEM_0_SIZE,
+ },
+ {
+ .lo = MV64x60_ENET2MEM_1_BASE,
+ .size = MV64x60_ENET2MEM_1_SIZE,
+ },
+ {
+ .lo = MV64x60_ENET2MEM_2_BASE,
+ .size = MV64x60_ENET2MEM_2_SIZE,
+ },
+ {
+ .lo = MV64x60_ENET2MEM_3_BASE,
+ .size = MV64x60_ENET2MEM_3_SIZE,
+ },
+};
+
+static struct mv64x60_mem_win mv64x60_mpsc2mem[MV64x60_CPU2MEM_WINDOWS] = {
+ {
+ .lo = MV64x60_MPSC2MEM_0_BASE,
+ .size = MV64x60_MPSC2MEM_0_SIZE,
+ },
+ {
+ .lo = MV64x60_MPSC2MEM_1_BASE,
+ .size = MV64x60_MPSC2MEM_1_SIZE,
+ },
+ {
+ .lo = MV64x60_MPSC2MEM_2_BASE,
+ .size = MV64x60_MPSC2MEM_2_SIZE,
+ },
+ {
+ .lo = MV64x60_MPSC2MEM_3_BASE,
+ .size = MV64x60_MPSC2MEM_3_SIZE,
+ },
+};
+
+static struct mv64x60_mem_win mv64x60_idma2mem[MV64x60_CPU2MEM_WINDOWS] = {
+ {
+ .lo = MV64x60_IDMA2MEM_0_BASE,
+ .size = MV64x60_IDMA2MEM_0_SIZE,
+ },
+ {
+ .lo = MV64x60_IDMA2MEM_1_BASE,
+ .size = MV64x60_IDMA2MEM_1_SIZE,
+ },
+ {
+ .lo = MV64x60_IDMA2MEM_2_BASE,
+ .size = MV64x60_IDMA2MEM_2_SIZE,
+ },
+ {
+ .lo = MV64x60_IDMA2MEM_3_BASE,
+ .size = MV64x60_IDMA2MEM_3_SIZE,
+ },
+};
+
+static u32 mv64x60_dram_selects[MV64x60_CPU2MEM_WINDOWS] = {0xe,0xd,0xb,0x7};
+
+/*
+ * ENET, MPSC, and IDMA ctlrs on the MV64x60 have separate windows that
+ * must be set up so that the respective ctlr can access system memory.
+ * Configure them to be same as cpu->memory windows.
+ */
+void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
+ u8 is_coherent)
+{
+ u32 i, base, size, enables, prot = 0, snoop_bits = 0;
+
+ /* Disable ctlr->mem windows */
+ out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0x3f);
+ out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), 0xf);
+ out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0xff);
+
+ if (is_coherent)
+ snoop_bits = 0x2 << 12; /* Writeback */
+
+ enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf;
+
+ for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
+ if (enables & (1 << i)) /* Set means disabled */
+ continue;
+
+ base = in_le32((u32 *)(bridge_base + mv64x60_cpu2mem[i].lo))
+ << 16;
+ base |= snoop_bits | (mv64x60_dram_selects[i] << 8);
+ size = in_le32((u32 *)(bridge_base + mv64x60_cpu2mem[i].size))
+ << 16;
+ prot |= (0x3 << (i << 1)); /* RW access */
+
+ out_le32((u32 *)(bridge_base + mv64x60_enet2mem[i].lo), base);
+ out_le32((u32 *)(bridge_base + mv64x60_enet2mem[i].size), size);
+ out_le32((u32 *)(bridge_base + mv64x60_mpsc2mem[i].lo), base);
+ out_le32((u32 *)(bridge_base + mv64x60_mpsc2mem[i].size), size);
+ out_le32((u32 *)(bridge_base + mv64x60_idma2mem[i].lo), base);
+ out_le32((u32 *)(bridge_base + mv64x60_idma2mem[i].size), size);
+ }
+
+ out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_0), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_1), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_2), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_ACC_PROT_0), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_ACC_PROT_1), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_0), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_1), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_2), prot);
+ out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_3), prot);
+
+ /* Set mpsc->bridge's reg window to the bridge's internal registers. */
+ out_le32((u32 *)(bridge_base + MV64x60_MPSC2REGS_BASE),
+ (u32)bridge_pbase);
+
+ out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), enables);
+ out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), enables);
+ out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_BAR_ENABLE), enables);
+}
+
+/* PCI MEM -> system memory, et. al. setup */
+static struct mv64x60_pci_win mv64x60_pci2mem[2] = {
+ { /* hose 0 */
+ .fcn = 0,
+ .hi = 0x14,
+ .lo = 0x10,
+ .size = MV64x60_PCI02MEM_0_SIZE,
+ },
+ { /* hose 1 */
+ .fcn = 0,
+ .hi = 0x94,
+ .lo = 0x90,
+ .size = MV64x60_PCI12MEM_0_SIZE,
+ },
+};
+
+static struct
+mv64x60_mem_win mv64x60_pci_acc[2][MV64x60_PCI_ACC_CNTL_WINDOWS] = {
+ { /* hose 0 */
+ {
+ .hi = MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
+ .lo = MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
+ .size = MV64x60_PCI0_ACC_CNTL_0_SIZE,
+ },
+ {
+ .hi = MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
+ .lo = MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
+ .size = MV64x60_PCI0_ACC_CNTL_1_SIZE,
+ },
+ {
+ .hi = MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
+ .lo = MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
+ .size = MV64x60_PCI0_ACC_CNTL_2_SIZE,
+ },
+ {
+ .hi = MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
+ .lo = MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
+ .size = MV64x60_PCI0_ACC_CNTL_3_SIZE,
+ },
+ },
+ { /* hose 1 */
+ {
+ .hi = MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
+ .lo = MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
+ .size = MV64x60_PCI1_ACC_CNTL_0_SIZE,
+ },
+ {
+ .hi = MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
+ .lo = MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
+ .size = MV64x60_PCI1_ACC_CNTL_1_SIZE,
+ },
+ {
+ .hi = MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
+ .lo = MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
+ .size = MV64x60_PCI1_ACC_CNTL_2_SIZE,
+ },
+ {
+ .hi = MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
+ .lo = MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
+ .size = MV64x60_PCI1_ACC_CNTL_3_SIZE,
+ },
+ },
+};
+
+static struct mv64x60_mem_win mv64x60_pci2reg[2] = {
+ {
+ .hi = 0x24,
+ .lo = 0x20,
+ .size = 0,
+ },
+ {
+ .hi = 0xa4,
+ .lo = 0xa0,
+ .size = 0,
+ },
+};
+
+/* Only need to use 1 window (per hose) to get access to all of system memory */
+void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
+ u8 bus, u32 mem_size, u32 acc_bits)
+{
+ u32 i, offset, bar_enable, enables;
+
+ /* Disable all windows but PCI MEM -> Bridge's regs window */
+ enables = ~(1 << 9);
+ bar_enable = hose ? MV64x60_PCI1_BAR_ENABLE : MV64x60_PCI0_BAR_ENABLE;
+ out_le32((u32 *)(bridge_base + bar_enable), enables);
+
+ for (i=0; i<MV64x60_PCI_ACC_CNTL_WINDOWS; i++)
+ out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][i].lo), 0);
+
+ /* If mem_size is 0, leave windows disabled */
+ if (mem_size == 0)
+ return;
+
+ /* Cause automatic updates of PCI remap regs */
+ offset = hose ?
+ MV64x60_PCI1_PCI_DECODE_CNTL : MV64x60_PCI0_PCI_DECODE_CNTL;
+ i = in_le32((u32 *)(bridge_base + offset));
+ out_le32((u32 *)(bridge_base + offset), i & ~0x1);
+
+ mem_size = (mem_size - 1) & 0xfffff000;
+
+ /* Map PCI MEM addr 0 -> System Mem addr 0 */
+ mv64x60_cfg_write(bridge_base, hose, bus,
+ PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn),
+ mv64x60_pci2mem[hose].hi, 0);
+ mv64x60_cfg_write(bridge_base, hose, bus,
+ PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn),
+ mv64x60_pci2mem[hose].lo, 0);
+ out_le32((u32 *)(bridge_base + mv64x60_pci2mem[hose].size),mem_size);
+
+ acc_bits |= MV64x60_PCI_ACC_CNTL_ENABLE;
+ out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].hi), 0);
+ out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].lo), acc_bits);
+ out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].size),mem_size);
+
+ /* Set PCI MEM->bridge's reg window to where they are in CPU mem map */
+ i = (u32)bridge_base;
+ i &= 0xffff0000;
+ i |= (0x2 << 1);
+ mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0),
+ mv64x60_pci2reg[hose].hi, 0);
+ mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0),
+ mv64x60_pci2reg[hose].lo, i);
+
+ enables &= ~0x1; /* Enable PCI MEM -> System Mem window 0 */
+ out_le32((u32 *)(bridge_base + bar_enable), enables);
+}
+
+/* CPU -> PCI I/O & MEM setup */
+struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2] = {
+ { /* hose 0 */
+ .lo = MV64x60_CPU2PCI0_IO_BASE,
+ .size = MV64x60_CPU2PCI0_IO_SIZE,
+ .remap_hi = 0,
+ .remap_lo = MV64x60_CPU2PCI0_IO_REMAP,
+ },
+ { /* hose 1 */
+ .lo = MV64x60_CPU2PCI1_IO_BASE,
+ .size = MV64x60_CPU2PCI1_IO_SIZE,
+ .remap_hi = 0,
+ .remap_lo = MV64x60_CPU2PCI1_IO_REMAP,
+ },
+};
+
+struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2] = {
+ { /* hose 0 */
+ .lo = MV64x60_CPU2PCI0_MEM_0_BASE,
+ .size = MV64x60_CPU2PCI0_MEM_0_SIZE,
+ .remap_hi = MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
+ .remap_lo = MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
+ },
+ { /* hose 1 */
+ .lo = MV64x60_CPU2PCI1_MEM_0_BASE,
+ .size = MV64x60_CPU2PCI1_MEM_0_SIZE,
+ .remap_hi = MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
+ .remap_lo = MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
+ },
+};
+
+/* Only need to set up 1 window to pci mem space */
+void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
+ u32 pci_base_lo, u32 cpu_base, u32 size,
+ struct mv64x60_cpu2pci_win *offset_tbl)
+{
+ cpu_base >>= 16;
+ cpu_base |= MV64x60_CPU2PCI_SWAP_NONE;
+ out_le32((u32 *)(bridge_base + offset_tbl[hose].lo), cpu_base);
+
+ if (offset_tbl[hose].remap_hi != 0)
+ out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_hi),
+ pci_base_hi);
+ out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_lo),
+ pci_base_lo >> 16);
+
+ size = (size - 1) >> 16;
+ out_le32((u32 *)(bridge_base + offset_tbl[hose].size), size);
+}
+
+/* Read mem ctlr to get the amount of mem in system */
+u32 mv64x60_get_mem_size(u8 *bridge_base)
+{
+ u32 enables, i, v;
+ u32 mem = 0;
+
+ enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf;
+
+ for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
+ if (!(enables & (1<<i))) {
+ v = in_le32((u32*)(bridge_base
+ + mv64x60_cpu2mem[i].size));
+ v = ((v & 0xffff) + 1) << 16;
+ mem += v;
+ }
+
+ return mem;
+}
+
+/* Get physical address of bridge's registers */
+u8 *mv64x60_get_bridge_pbase(void)
+{
+ u32 v[2];
+ void *devp;
+
+ devp = finddevice("/mv64x60");
+ if (devp == NULL)
+ goto err_out;
+ if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
+ goto err_out;
+
+ return (u8 *)v[0];
+
+err_out:
+ return 0;
+}
+
+/* Get virtual address of bridge's registers */
+u8 *mv64x60_get_bridge_base(void)
+{
+ u32 v;
+ void *devp;
+
+ devp = finddevice("/mv64x60");
+ if (devp == NULL)
+ goto err_out;
+ if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+ goto err_out;
+
+ return (u8 *)v;
+
+err_out:
+ return 0;
+}
+
+u8 mv64x60_is_coherent(void)
+{
+ u32 v;
+ void *devp;
+
+ devp = finddevice("/");
+ if (devp == NULL)
+ return 1; /* Assume coherency on */
+
+ if (getprop(devp, "coherency-off", &v, sizeof(v)) < 0)
+ return 1; /* Coherency on */
+ else
+ return 0;
+}
diff --git a/arch/powerpc/boot/mv64x60.h b/arch/powerpc/boot/mv64x60.h
new file mode 100644
index 0000000..b827105
--- /dev/null
+++ b/arch/powerpc/boot/mv64x60.h
@@ -0,0 +1,70 @@
+/*
+ * Author: Mark A. Greer <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PPC_BOOT_MV64x60_H_
+#define _PPC_BOOT_MV64x60_H_
+
+#define MV64x60_CPU_BAR_ENABLE 0x0278
+
+#define MV64x60_PCI_ACC_CNTL_ENABLE (1<<0)
+#define MV64x60_PCI_ACC_CNTL_REQ64 (1<<1)
+#define MV64x60_PCI_ACC_CNTL_SNOOP_NONE 0x00000000
+#define MV64x60_PCI_ACC_CNTL_SNOOP_WT 0x00000004
+#define MV64x60_PCI_ACC_CNTL_SNOOP_WB 0x00000008
+#define MV64x60_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c
+#define MV64x60_PCI_ACC_CNTL_ACCPROT (1<<4)
+#define MV64x60_PCI_ACC_CNTL_WRPROT (1<<5)
+#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
+#define MV64x60_PCI_ACC_CNTL_SWAP_NONE 0x00000040
+#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080
+#define MV64x60_PCI_ACC_CNTL_SWAP_WORD 0x000000c0
+#define MV64x60_PCI_ACC_CNTL_SWAP_MASK 0x000000c0
+#define MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000
+#define MV64x60_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100
+#define MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200
+#define MV64x60_PCI_ACC_CNTL_MBURST_MASK 0x00000300
+#define MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000
+#define MV64x60_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400
+#define MV64x60_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800
+#define MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00
+#define MV64x60_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00
+
+struct mv64x60_cpu2pci_win {
+ u32 lo;
+ u32 size;
+ u32 remap_hi;
+ u32 remap_lo;
+};
+
+extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2];
+extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2];
+
+u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
+ u8 offset);
+void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
+ u8 offset, u32 val);
+
+void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
+ u8 is_coherent);
+void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
+ u8 bus, u32 mem_size, u32 acc_bits);
+void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
+ u32 pci_base_lo, u32 cpu_base, u32 size,
+ struct mv64x60_cpu2pci_win *offset_tbl);
+u32 mv64x60_get_mem_size(u8 *bridge_base);
+u8 *mv64x60_get_bridge_pbase(void);
+u8 *mv64x60_get_bridge_base(void);
+u8 mv64x60_is_coherent(void);
+
+int mv64x60_i2c_open(void);
+int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
+ u32 count);
+void mv64x60_i2c_close(void);
+
+#endif /* _PPC_BOOT_MV64x60_H_ */
diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c
new file mode 100644
index 0000000..435fe85
--- /dev/null
+++ b/arch/powerpc/boot/mv64x60_i2c.c
@@ -0,0 +1,206 @@
+/*
+ * Bootloader version of the i2c driver for the MV64x60.
+ *
+ * Author: Dale Farnsworth <dfarnsworth@mvista.com>
+ * Maintained by: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2003, 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "mv64x60.h"
+
+extern void udelay(long);
+
+/* Register defines */
+#define MV64x60_I2C_REG_SLAVE_ADDR 0x00
+#define MV64x60_I2C_REG_DATA 0x04
+#define MV64x60_I2C_REG_CONTROL 0x08
+#define MV64x60_I2C_REG_STATUS 0x0c
+#define MV64x60_I2C_REG_BAUD 0x0c
+#define MV64x60_I2C_REG_EXT_SLAVE_ADDR 0x10
+#define MV64x60_I2C_REG_SOFT_RESET 0x1c
+
+#define MV64x60_I2C_CONTROL_ACK 0x04
+#define MV64x60_I2C_CONTROL_IFLG 0x08
+#define MV64x60_I2C_CONTROL_STOP 0x10
+#define MV64x60_I2C_CONTROL_START 0x20
+#define MV64x60_I2C_CONTROL_TWSIEN 0x40
+#define MV64x60_I2C_CONTROL_INTEN 0x80
+
+#define MV64x60_I2C_STATUS_BUS_ERR 0x00
+#define MV64x60_I2C_STATUS_MAST_START 0x08
+#define MV64x60_I2C_STATUS_MAST_REPEAT_START 0x10
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
+#define MV64x60_I2C_STATUS_MAST_WR_ACK 0x28
+#define MV64x60_I2C_STATUS_MAST_WR_NO_ACK 0x30
+#define MV64x60_I2C_STATUS_MAST_LOST_ARB 0x38
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
+#define MV64x60_I2C_STATUS_MAST_RD_DATA_ACK 0x50
+#define MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
+#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
+#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
+#define MV64x60_I2C_STATUS_NO_STATUS 0xf8
+
+static u8 *ctlr_base;
+
+static int mv64x60_i2c_wait_for_status(int wanted)
+{
+ int i;
+ int status;
+
+ for (i=0; i<1000; i++) {
+ udelay(10);
+ status = in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_STATUS))
+ & 0xff;
+ if (status == wanted)
+ return status;
+ }
+ return -status;
+}
+
+static int mv64x60_i2c_control(int control, int status)
+{
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
+ return mv64x60_i2c_wait_for_status(status);
+}
+
+static int mv64x60_i2c_read_byte(int control, int status)
+{
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
+ if (mv64x60_i2c_wait_for_status(status) < 0)
+ return -1;
+ return in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA)) & 0xff;
+}
+
+static int mv64x60_i2c_write_byte(int data, int control, int status)
+{
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA), data & 0xff);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
+ return mv64x60_i2c_wait_for_status(status);
+}
+
+int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
+ u32 count)
+{
+ int i;
+ int data;
+ int control;
+ int status;
+
+ if (ctlr_base == NULL)
+ return -1;
+
+ /* send reset */
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SOFT_RESET), 0);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SLAVE_ADDR), 0);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_EXT_SLAVE_ADDR), 0);
+ out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_BAUD), (4 << 3) | 0x4);
+
+ if (mv64x60_i2c_control(MV64x60_I2C_CONTROL_TWSIEN,
+ MV64x60_I2C_STATUS_NO_STATUS) < 0)
+ return -1;
+
+ /* send start */
+ control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_START;
+ if (mv64x60_i2c_control(control, status) < 0)
+ return -1;
+
+ /* select device for writing */
+ data = devaddr & ~0x1;
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK;
+ if (mv64x60_i2c_write_byte(data, control, status) < 0)
+ return -1;
+
+ /* send offset of data */
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_WR_ACK;
+ if (offset_size > 1) {
+ if (mv64x60_i2c_write_byte(offset >> 8, control, status) < 0)
+ return -1;
+ }
+ if (mv64x60_i2c_write_byte(offset, control, status) < 0)
+ return -1;
+
+ /* resend start */
+ control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_REPEAT_START;
+ if (mv64x60_i2c_control(control, status) < 0)
+ return -1;
+
+ /* select device for reading */
+ data = devaddr | 0x1;
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK;
+ if (mv64x60_i2c_write_byte(data, control, status) < 0)
+ return -1;
+
+ /* read all but last byte of data */
+ control = MV64x60_I2C_CONTROL_ACK | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_RD_DATA_ACK;
+
+ for (i=1; i<count; i++) {
+ data = mv64x60_i2c_read_byte(control, status);
+ if (data < 0) {
+ printf("errors on iteration %d\n", i);
+ return -1;
+ }
+ *buf++ = data;
+ }
+
+ /* read last byte of data */
+ control = MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK;
+ data = mv64x60_i2c_read_byte(control, status);
+ if (data < 0)
+ return -1;
+ *buf++ = data;
+
+ /* send stop */
+ control = MV64x60_I2C_CONTROL_STOP | MV64x60_I2C_CONTROL_TWSIEN;
+ status = MV64x60_I2C_STATUS_NO_STATUS;
+ if (mv64x60_i2c_control(control, status) < 0)
+ return -1;
+
+ return count;
+}
+
+int mv64x60_i2c_open(void)
+{
+ u32 v;
+ void *devp;
+
+ devp = finddevice("/mv64x60/i2c");
+ if (devp == NULL)
+ goto err_out;
+ if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+ goto err_out;
+
+ ctlr_base = (u8 *)v;
+ return 0;
+
+err_out:
+ return -1;
+}
+
+void mv64x60_i2c_close(void)
+{
+ ctlr_base = NULL;
+}
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 73bd47a..959124f 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -79,6 +79,7 @@
int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device);
int serial_console_init(void);
int ns16550_console_init(void *devp, struct serial_console_data *scdp);
+int mpsc_console_init(void *devp, struct serial_console_data *scdp);
void *simple_alloc_init(char *base, unsigned long heap_size,
unsigned long granularity, unsigned long max_allocs);
extern void flush_cache(void *, unsigned long);
diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c
new file mode 100644
index 0000000..f428bac
--- /dev/null
+++ b/arch/powerpc/boot/prpmc2800.c
@@ -0,0 +1,577 @@
+/*
+ * Motorola ECC prpmc280/f101 & prpmc2800/f101e platform code.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "gunzip_util.h"
+#include "mv64x60.h"
+
+extern char _end[];
+extern char _vmlinux_start[], _vmlinux_end[];
+extern char _dtb_start[], _dtb_end[];
+
+extern void udelay(long delay);
+
+#define KB 1024U
+#define MB (KB*KB)
+#define GB (KB*MB)
+#define MHz (1000U*1000U)
+#define GHz (1000U*MHz)
+
+#define BOARD_MODEL "PrPMC2800"
+#define BOARD_MODEL_MAX 32 /* max strlen(BOARD_MODEL) + 1 */
+
+#define EEPROM2_ADDR 0xa4
+#define EEPROM3_ADDR 0xa8
+
+BSS_STACK(16*KB);
+
+static u8 *bridge_base;
+
+typedef enum {
+ BOARD_MODEL_PRPMC280,
+ BOARD_MODEL_PRPMC2800,
+} prpmc2800_board_model;
+
+typedef enum {
+ BRIDGE_TYPE_MV64360,
+ BRIDGE_TYPE_MV64362,
+} prpmc2800_bridge_type;
+
+struct prpmc2800_board_info {
+ prpmc2800_board_model model;
+ char variant;
+ prpmc2800_bridge_type bridge_type;
+ u8 subsys0;
+ u8 subsys1;
+ u8 vpd4;
+ u8 vpd4_mask;
+ u32 core_speed;
+ u32 mem_size;
+ u32 boot_flash;
+ u32 user_flash;
+};
+
+static struct prpmc2800_board_info prpmc2800_board_info[] = {
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'a',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x0f,
+ .core_speed = 1*GHz,
+ .mem_size = 512*MB,
+ .boot_flash = 1*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'b',
+ .bridge_type = BRIDGE_TYPE_MV64362,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x01,
+ .vpd4_mask = 0x0f,
+ .core_speed = 1*GHz,
+ .mem_size = 512*MB,
+ .boot_flash = 0,
+ .user_flash = 0,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'c',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x02,
+ .vpd4_mask = 0x0f,
+ .core_speed = 733*MHz,
+ .mem_size = 512*MB,
+ .boot_flash = 1*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'd',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x03,
+ .vpd4_mask = 0x0f,
+ .core_speed = 1*GHz,
+ .mem_size = 1*GB,
+ .boot_flash = 1*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'e',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x04,
+ .vpd4_mask = 0x0f,
+ .core_speed = 1*GHz,
+ .mem_size = 512*MB,
+ .boot_flash = 1*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'f',
+ .bridge_type = BRIDGE_TYPE_MV64362,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x05,
+ .vpd4_mask = 0x0f,
+ .core_speed = 733*MHz,
+ .mem_size = 128*MB,
+ .boot_flash = 1*MB,
+ .user_flash = 0,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'g',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x06,
+ .vpd4_mask = 0x0f,
+ .core_speed = 1*GHz,
+ .mem_size = 256*MB,
+ .boot_flash = 1*MB,
+ .user_flash = 0,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC280,
+ .variant = 'h',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xff,
+ .subsys1 = 0xff,
+ .vpd4 = 0x07,
+ .vpd4_mask = 0x0f,
+ .core_speed = 1*GHz,
+ .mem_size = 1*GB,
+ .boot_flash = 1*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'a',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xb2,
+ .subsys1 = 0x8c,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 1*GHz,
+ .mem_size = 512*MB,
+ .boot_flash = 2*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'b',
+ .bridge_type = BRIDGE_TYPE_MV64362,
+ .subsys0 = 0xb2,
+ .subsys1 = 0x8d,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 1*GHz,
+ .mem_size = 512*MB,
+ .boot_flash = 0,
+ .user_flash = 0,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'c',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xb2,
+ .subsys1 = 0x8e,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 733*MHz,
+ .mem_size = 512*MB,
+ .boot_flash = 2*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'd',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xb2,
+ .subsys1 = 0x8f,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 1*GHz,
+ .mem_size = 1*GB,
+ .boot_flash = 2*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'e',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xa2,
+ .subsys1 = 0x8a,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 1*GHz,
+ .mem_size = 512*MB,
+ .boot_flash = 2*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'f',
+ .bridge_type = BRIDGE_TYPE_MV64362,
+ .subsys0 = 0xa2,
+ .subsys1 = 0x8b,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 733*MHz,
+ .mem_size = 128*MB,
+ .boot_flash = 2*MB,
+ .user_flash = 0,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'g',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xa2,
+ .subsys1 = 0x8c,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 1*GHz,
+ .mem_size = 2*GB,
+ .boot_flash = 2*MB,
+ .user_flash = 64*MB,
+ },
+ {
+ .model = BOARD_MODEL_PRPMC2800,
+ .variant = 'h',
+ .bridge_type = BRIDGE_TYPE_MV64360,
+ .subsys0 = 0xa2,
+ .subsys1 = 0x8d,
+ .vpd4 = 0x00,
+ .vpd4_mask = 0x00,
+ .core_speed = 733*MHz,
+ .mem_size = 1*GB,
+ .boot_flash = 2*MB,
+ .user_flash = 64*MB,
+ },
+};
+
+static struct prpmc2800_board_info *prpmc2800_get_board_info(u8 *vpd)
+{
+ struct prpmc2800_board_info *bip;
+ int i;
+
+ for (i=0,bip=prpmc2800_board_info; i<ARRAY_SIZE(prpmc2800_board_info);
+ i++,bip++)
+ if ((vpd[0] == bip->subsys0) && (vpd[1] == bip->subsys1)
+ && ((vpd[4] & bip->vpd4_mask) == bip->vpd4))
+ return bip;
+
+ return NULL;
+}
+
+/* Get VPD from i2c eeprom 2, then match it to a board info entry */
+static struct prpmc2800_board_info *prpmc2800_get_bip(void)
+{
+ struct prpmc2800_board_info *bip;
+ u8 vpd[5];
+ int rc;
+
+ if (mv64x60_i2c_open())
+ fatal("Error: Can't open i2c device\n\r");
+
+ /* Get VPD from i2c eeprom-2 */
+ memset(vpd, 0, sizeof(vpd));
+ rc = mv64x60_i2c_read(EEPROM2_ADDR, vpd, 0x1fde, 2, sizeof(vpd));
+ if (rc < 0)
+ fatal("Error: Couldn't read eeprom2\n\r");
+ mv64x60_i2c_close();
+
+ /* Get board type & related info */
+ bip = prpmc2800_get_board_info(vpd);
+ if (bip == NULL) {
+ printf("Error: Unsupported board or corrupted VPD:\n\r");
+ printf(" 0x%x 0x%x 0x%x 0x%x 0x%x\n\r",
+ vpd[0], vpd[1], vpd[2], vpd[3], vpd[4]);
+ printf("Using device tree defaults...\n\r");
+ }
+
+ return bip;
+}
+
+static void prpmc2800_bridge_setup(u32 mem_size)
+{
+ u32 i, v[12], enables, acc_bits;
+ u32 pci_base_hi, pci_base_lo, size, buf[2];
+ unsigned long cpu_base;
+ int rc;
+ void *devp;
+ u8 *bridge_pbase, is_coherent;
+ struct mv64x60_cpu2pci_win *tbl;
+
+ bridge_pbase = mv64x60_get_bridge_pbase();
+ is_coherent = mv64x60_is_coherent();
+
+ if (is_coherent)
+ acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
+ | MV64x60_PCI_ACC_CNTL_SWAP_NONE
+ | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
+ | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+ else
+ acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
+ | MV64x60_PCI_ACC_CNTL_SWAP_NONE
+ | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
+ | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+
+ mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
+ mv64x60_config_pci_windows(bridge_base, bridge_pbase, 0, 0, mem_size,
+ acc_bits);
+
+ /* Get the cpu -> pci i/o & mem mappings from the device tree */
+ devp = finddevice("/mv64x60/pci@80000000");
+ if (devp == NULL)
+ fatal("Error: Missing /mv64x60/pci@80000000"
+ " device tree node\n\r");
+
+ rc = getprop(devp, "ranges", v, sizeof(v));
+ if (rc != sizeof(v))
+ fatal("Error: Can't find /mv64x60/pci@80000000/ranges"
+ " property\n\r");
+
+ /* Get the cpu -> pci i/o & mem mappings from the device tree */
+ devp = finddevice("/mv64x60");
+ if (devp == NULL)
+ fatal("Error: Missing /mv64x60 device tree node\n\r");
+
+ enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+ enables |= 0x0007fe00; /* Disable all cpu->pci windows */
+ out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+
+ for (i=0; i<12; i+=6) {
+ switch (v[i] & 0xff000000) {
+ case 0x01000000: /* PCI I/O Space */
+ tbl = mv64x60_cpu2pci_io;
+ break;
+ case 0x02000000: /* PCI MEM Space */
+ tbl = mv64x60_cpu2pci_mem;
+ break;
+ default:
+ continue;
+ }
+
+ pci_base_hi = v[i+1];
+ pci_base_lo = v[i+2];
+ cpu_base = v[i+3];
+ size = v[i+5];
+
+ buf[0] = cpu_base;
+ buf[1] = size;
+
+ if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
+ fatal("Error: Can't translate PCI address 0x%x\n\r",
+ (u32)cpu_base);
+
+ mv64x60_config_cpu2pci_window(bridge_base, 0, pci_base_hi,
+ pci_base_lo, cpu_base, size, tbl);
+ }
+
+ enables &= ~0x00000600; /* Enable cpu->pci0 i/o, cpu->pci0 mem0 */
+ out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+}
+
+static void prpmc2800_fixups(void)
+{
+ u32 v[2], l, mem_size;
+ int rc;
+ void *devp;
+ char model[BOARD_MODEL_MAX];
+ struct prpmc2800_board_info *bip;
+
+ bip = prpmc2800_get_bip(); /* Get board info based on VPD */
+
+ mem_size = (bip) ? bip->mem_size : mv64x60_get_mem_size(bridge_base);
+ prpmc2800_bridge_setup(mem_size); /* Do necessary bridge setup */
+
+ /* If the VPD doesn't match what we know about, just use the
+ * defaults already in the device tree.
+ */
+ if (!bip)
+ return;
+
+ /* Know the board type so override device tree defaults */
+ /* Set /model appropriately */
+ devp = finddevice("/");
+ if (devp == NULL)
+ fatal("Error: Missing '/' device tree node\n\r");
+ memset(model, 0, BOARD_MODEL_MAX);
+ strncpy(model, BOARD_MODEL, BOARD_MODEL_MAX - 2);
+ l = strlen(model);
+ if (bip->model == BOARD_MODEL_PRPMC280)
+ l--;
+ model[l++] = bip->variant;
+ model[l++] = '\0';
+ setprop(devp, "model", model, l);
+
+ /* Set /cpus/PowerPC,7447/clock-frequency */
+ devp = finddevice("/cpus/PowerPC,7447");
+ if (devp == NULL)
+ fatal("Error: Missing proper /cpus device tree node\n\r");
+ v[0] = bip->core_speed;
+ setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
+
+ /* Set /memory/reg size */
+ devp = finddevice("/memory");
+ if (devp == NULL)
+ fatal("Error: Missing /memory device tree node\n\r");
+ v[0] = 0;
+ v[1] = bip->mem_size;
+ setprop(devp, "reg", v, sizeof(v));
+
+ /* Update /mv64x60/model, if this is a mv64362 */
+ if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
+ devp = finddevice("/mv64x60");
+ if (devp == NULL)
+ fatal("Error: Missing /mv64x60 device tree node\n\r");
+ setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
+ }
+
+ /* Set User FLASH size */
+ devp = finddevice("/mv64x60/flash@a0000000");
+ if (devp == NULL)
+ fatal("Error: Missing User FLASH device tree node\n\r");
+ rc = getprop(devp, "reg", v, sizeof(v));
+ if (rc != sizeof(v))
+ fatal("Error: Can't find User FLASH reg property\n\r");
+ v[1] = bip->user_flash;
+ setprop(devp, "reg", v, sizeof(v));
+}
+
+#define MV64x60_MPP_CNTL_0 0xf000
+#define MV64x60_MPP_CNTL_2 0xf008
+#define MV64x60_GPP_IO_CNTL 0xf100
+#define MV64x60_GPP_LEVEL_CNTL 0xf110
+#define MV64x60_GPP_VALUE_SET 0xf118
+
+static void prpmc2800_reset(void)
+{
+ u32 temp;
+
+ udelay(5000000);
+
+ if (bridge_base != 0) {
+ temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
+ temp &= 0xFFFF0FFF;
+ out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+ temp |= 0x00000004;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+ temp |= 0x00000004;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
+ temp &= 0xFFFF0FFF;
+ out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+ temp |= 0x00080000;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+ temp |= 0x00080000;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
+ 0x00080004);
+ }
+
+ for (;;);
+}
+
+#define HEAP_SIZE (16*MB)
+static struct gunzip_state gzstate;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ struct elf_info ei;
+ char *heap_start, *dtb;
+ int dt_size = _dtb_end - _dtb_start;
+ void *vmlinuz_addr = _vmlinux_start;
+ unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
+ char elfheader[256];
+
+ if (dt_size <= 0) /* No fdt */
+ exit();
+
+ /*
+ * Start heap after end of the kernel (after decompressed to
+ * address 0) or the end of the zImage, whichever is higher.
+ * That's so things allocated by simple_alloc won't overwrite
+ * any part of the zImage and the kernel won't overwrite the dtb
+ * when decompressed & relocated.
+ */
+ gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
+ gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
+
+ if (!parse_elf32(elfheader, &ei))
+ exit();
+
+ heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/
+ heap_start = max(heap_start, (char *)_end); /* end of zImage */
+
+ if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16)
+ > (128*MB))
+ exit();
+
+ /* Relocate dtb to safe area past end of zImage & kernel */
+ dtb = malloc(dt_size);
+ if (!dtb)
+ exit();
+ memmove(dtb, _dtb_start, dt_size);
+ if (ft_init(dtb, dt_size, 16))
+ exit();
+
+ bridge_base = mv64x60_get_bridge_base();
+
+ platform_ops.fixups = prpmc2800_fixups;
+ platform_ops.exit = prpmc2800_reset;
+
+ if (serial_console_init() < 0)
+ exit();
+}
+
+/* _zimage_start called very early--need to turn off external interrupts */
+asm (" .globl _zimage_start\n\
+ _zimage_start:\n\
+ mfmsr 10\n\
+ rlwinm 10,10,0,~(1<<15) /* Clear MSR_EE */\n\
+ sync\n\
+ mtmsr 10\n\
+ isync\n\
+ b _zimage_start_lib\n\
+");
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index e8de4cf..7fd3233 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -125,6 +125,8 @@
if (!strcmp(compat, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
+ else if (!strcmp(compat, "marvell,mpsc"))
+ rc = mpsc_console_init(devp, &serial_cd);
/* Add other serial console driver calls here */
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index a1fe971..91b657b 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc4
-# Thu Jan 11 20:55:33 2007
+# Linux kernel version: 2.6.21
+# Tue May 8 12:32:16 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -60,6 +60,7 @@
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@@ -70,6 +71,7 @@
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -132,15 +134,26 @@
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
+CONFIG_PPC_CELLEB=y
+# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_PS3 is not set
-CONFIG_PPC_CELLEB=y
+
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=y
+CONFIG_SPU_BASE=y
+# CONFIG_PQ2ADS is not set
CONFIG_PPC_UDBG_BEAT=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
# CONFIG_U3_DART is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
@@ -149,15 +162,7 @@
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-# CONFIG_MPIC is not set
-
-#
-# Cell Broadband Engine options
-#
-CONFIG_SPU_FS=y
-CONFIG_SPU_BASE=y
-# CONFIG_CBE_RAS is not set
+# CONFIG_CPM2 is not set
#
# Kernel options
@@ -183,7 +188,6 @@
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
@@ -199,6 +203,7 @@
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_64K_PAGES is not set
@@ -207,14 +212,14 @@
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
+CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
@@ -240,13 +245,13 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -262,7 +267,7 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
@@ -280,6 +285,7 @@
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -302,17 +308,21 @@
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -352,6 +362,13 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
# CONFIG_IEEE80211 is not set
#
@@ -365,16 +382,13 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
@@ -385,6 +399,7 @@
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -404,7 +419,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -443,7 +457,6 @@
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
@@ -458,6 +471,7 @@
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -468,11 +482,11 @@
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_CELLEB=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_CELLEB=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
@@ -546,6 +560,7 @@
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
# CONFIG_SCSI_SRP is not set
#
@@ -591,12 +606,7 @@
# I2O device support
#
# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
#
# Network device support
@@ -652,15 +662,18 @@
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=y
# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_PASEMI_MAC is not set
#
# Token Ring devices
@@ -668,9 +681,10 @@
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
# Wan interfaces
@@ -770,6 +784,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_TXX9=y
CONFIG_HAS_TXX9_SERIAL=y
+CONFIG_SERIAL_TXX9_NR_UARTS=3
CONFIG_SERIAL_TXX9_CONSOLE=y
# CONFIG_SERIAL_TXX9_STDSERIAL is not set
# CONFIG_SERIAL_JSM is not set
@@ -891,6 +906,11 @@
# CONFIG_HWMON_VID is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -904,7 +924,7 @@
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
@@ -913,7 +933,6 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -924,6 +943,15 @@
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
#
# USB support
@@ -938,9 +966,8 @@
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
@@ -953,6 +980,7 @@
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -989,10 +1017,6 @@
#
# USB Input Devices
#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
@@ -1005,6 +1029,7 @@
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
@@ -1042,6 +1067,7 @@
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1052,6 +1078,7 @@
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
@@ -1109,6 +1136,10 @@
#
#
+# Auxiliary Display support
+#
+
+#
# Virtualization
#
@@ -1293,6 +1324,8 @@
# Distributed Lock Manager
#
# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+# CONFIG_UCC_FAST is not set
#
# Library routines
@@ -1305,7 +1338,8 @@
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
@@ -1323,15 +1357,16 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1341,8 +1376,10 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
@@ -1356,6 +1393,7 @@
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
CONFIG_PPC_EARLY_DEBUG_BEAT=y
#
@@ -1385,8 +1423,10 @@
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
@@ -1401,6 +1441,7 @@
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
#
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
new file mode 100644
index 0000000..c70a730
--- /dev/null
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -0,0 +1,1442 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Wed May 9 09:42:46 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_CONFIG_CHECK_CACHE_COHERENCY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_APUS is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_LINKSTATION is not set
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_PPC_HOLLY is not set
+CONFIG_PPC_PRPMC2800=y
+CONFIG_MV64X60=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="prpmc2800.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+# CONFIG_PPC_INDIRECT_PCI_BE is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MPSC=y
+CONFIG_SERIAL_MPSC_CONSOLE=y
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_MV64XXX=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+CONFIG_RTC_DRV_MAX6900=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+# CONFIG_UCC_FAST is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index fd60496..4779345 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21
-# Mon Apr 30 12:03:35 2007
+# Fri May 11 10:16:27 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
@@ -40,6 +40,7 @@
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
@@ -67,6 +68,7 @@
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
@@ -87,12 +89,13 @@
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -213,6 +216,7 @@
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_MEMORY_PROBE=y
+# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
@@ -229,15 +233,12 @@
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
CONFIG_KERNEL_START=0xc000000000000000
#
@@ -363,7 +364,9 @@
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -414,6 +417,7 @@
#
# Misc devices
#
+# CONFIG_BLINK is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -447,6 +451,7 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -473,25 +478,7 @@
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
#
# Network device support
@@ -519,6 +506,7 @@
#
# Ethernet (10000 Mbit)
#
+CONFIG_MLX4_DEBUG=y
#
# Token Ring devices
@@ -531,6 +519,25 @@
# CONFIG_WLAN_80211 is not set
#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+
+#
# Wan interfaces
#
# CONFIG_WAN is not set
@@ -575,6 +582,7 @@
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -609,15 +617,10 @@
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -626,10 +629,6 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
@@ -642,12 +641,7 @@
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
#
# Multifunction device drivers
@@ -669,12 +663,23 @@
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -702,10 +707,6 @@
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -768,6 +769,20 @@
# CONFIG_HID_DEBUG is not set
#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -827,56 +842,10 @@
# CONFIG_USB_LIBUSUAL is not set
#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=m
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_MON=y
#
@@ -920,10 +889,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -966,14 +931,6 @@
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# File systems
#
CONFIG_EXT2_FS=m
@@ -1071,6 +1028,7 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1148,11 +1106,13 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Instrumentation Support
@@ -1171,7 +1131,6 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1205,6 +1164,7 @@
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
#
# Security options
@@ -1234,6 +1194,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
diff --git a/arch/powerpc/kernel/audit.c b/arch/powerpc/kernel/audit.c
index 7fe5e63..a4dab7c 100644
--- a/arch/powerpc/kernel/audit.c
+++ b/arch/powerpc/kernel/audit.c
@@ -23,6 +23,20 @@
~0U
};
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_PPC64
+ if (arch == AUDIT_ARCH_PPC)
+ return 1;
+#endif
+ return 0;
+}
+
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_PPC64
@@ -51,15 +65,18 @@
extern __u32 ppc32_write_class[];
extern __u32 ppc32_read_class[];
extern __u32 ppc32_chattr_class[];
+ extern __u32 ppc32_signal_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL_32, ppc32_signal_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
return 0;
}
diff --git a/arch/powerpc/kernel/compat_audit.c b/arch/powerpc/kernel/compat_audit.c
index 640d4bb..108ff14 100644
--- a/arch/powerpc/kernel/compat_audit.c
+++ b/arch/powerpc/kernel/compat_audit.c
@@ -21,6 +21,11 @@
~0U
};
+unsigned ppc32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
int ppc32_classify_syscall(unsigned syscall)
{
switch(syscall) {
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 9ed4931..068377a 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -173,7 +173,7 @@
lv1_get_version_info(&tmp);
}
- hard_irq_enable();
+ __hard_irq_enable();
}
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 6d05a1f..b0409e1 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -1098,35 +1098,24 @@
unsigned long *start_virt, unsigned long *size)
{
struct pci_controller *hose = pci_bus_to_host(bus);
- struct pci_bus_region region;
struct resource *res;
- if (bus->self) {
+ if (bus->self)
res = bus->resource[0];
- pcibios_resource_to_bus(bus->self, ®ion, res);
- *start_phys = hose->io_base_phys + region.start;
- *start_virt = (unsigned long) hose->io_base_virt +
- region.start;
- if (region.end > region.start)
- *size = region.end - region.start + 1;
- else {
- printk("%s(): unexpected region 0x%lx->0x%lx\n",
- __FUNCTION__, region.start, region.end);
- return 1;
- }
-
- } else {
+ else
/* Root Bus */
res = &hose->io_resource;
- *start_phys = hose->io_base_phys + res->start;
- *start_virt = (unsigned long) hose->io_base_virt + res->start;
- if (res->end > res->start)
- *size = res->end - res->start + 1;
- else {
- printk("%s(): unexpected region 0x%lx->0x%lx\n",
- __FUNCTION__, res->start, res->end);
- return 1;
- }
+
+ *start_virt = pci_io_base + res->start;
+ *start_phys = *start_virt + hose->io_base_phys
+ - (unsigned long) hose->io_base_virt;
+
+ if (res->end > res->start)
+ *size = res->end - res->start + 1;
+ else {
+ printk("%s(): unexpected region 0x%lx->0x%lx\n",
+ __FUNCTION__, res->start, res->end);
+ return 1;
}
return 0;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index caef555..c065b55 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -716,11 +716,40 @@
return 0;
}
+#ifdef CONFIG_BLK_DEV_INITRD
+static void __init early_init_dt_check_for_initrd(unsigned long node)
+{
+ unsigned long l;
+ u32 *prop;
+
+ DBG("Looking for initrd properties... ");
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
+ if (prop) {
+ initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
+ if (prop) {
+ initrd_end = (unsigned long)
+ __va(of_read_ulong(prop, l/4));
+ initrd_below_start_ok = 1;
+ } else {
+ initrd_start = 0;
+ }
+ }
+
+ DBG("initrd_start=0x%lx initrd_end=0x%lx\n", initrd_start, initrd_end);
+}
+#else
+static inline void early_init_dt_check_for_initrd(unsigned long node)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
static int __init early_init_dt_scan_chosen(unsigned long node,
const char *uname, int depth, void *data)
{
unsigned long *lprop;
- u32 *prop;
unsigned long l;
char *p;
@@ -762,21 +791,7 @@
crashk_res.end = crashk_res.start + *lprop - 1;
#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- DBG("Looking for initrd properties... ");
- prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
- if (prop) {
- initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
- prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
- if (prop) {
- initrd_end = (unsigned long)__va(of_read_ulong(prop, l/4));
- initrd_below_start_ok = 1;
- } else {
- initrd_start = 0;
- }
- }
- DBG("initrd_start=0x%lx initrd_end=0x%lx\n", initrd_start, initrd_end);
-#endif /* CONFIG_BLK_DEV_INITRD */
+ early_init_dt_check_for_initrd(node);
/* Retreive command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index b5c96af..3786dcc 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -24,7 +24,7 @@
/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4
#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
- (ns) > 0)
+ (ns) >= 0)
static struct of_bus *of_match_bus(struct device_node *np);
static int __of_address_to_resource(struct device_node *dev,
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 3708037..ed07a19 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -530,3 +530,44 @@
{
atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block);
}
+
+#ifdef CONFIG_CHECK_CACHE_COHERENCY
+/*
+ * For platforms that have configurable cache-coherency. This function
+ * checks that the cache coherency setting of the kernel matches the setting
+ * left by the firmware, as indicated in the device tree. Since a mismatch
+ * will eventually result in DMA failures, we print * and error and call
+ * BUG() in that case.
+ */
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define KERNEL_COHERENCY 0
+#else
+#define KERNEL_COHERENCY 1
+#endif
+
+static int __init check_cache_coherency(void)
+{
+ struct device_node *np;
+ const void *prop;
+ int devtree_coherency;
+
+ np = of_find_node_by_path("/");
+ prop = of_get_property(np, "coherency-off", NULL);
+ of_node_put(np);
+
+ devtree_coherency = prop ? 0 : 1;
+
+ if (devtree_coherency != KERNEL_COHERENCY) {
+ printk(KERN_ERR
+ "kernel coherency:%s != device tree_coherency:%s\n",
+ KERNEL_COHERENCY ? "on" : "off",
+ devtree_coherency ? "on" : "off");
+ BUG();
+ }
+
+ return 0;
+}
+
+late_initcall(check_cache_coherency);
+#endif /* CONFIG_CHECK_CACHE_COHERENCY */
diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c
index 064a7ba..77b7b34 100644
--- a/arch/powerpc/kernel/swsusp.c
+++ b/arch/powerpc/kernel/swsusp.c
@@ -36,8 +36,4 @@
#ifdef CONFIG_PPC32
set_context(current->active_mm->context.id, current->active_mm->pgd);
#endif
-
-#ifdef CONFIG_PPC64
- hard_irq_enable();
-#endif
}
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 7cedef8..2c8564d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -711,30 +711,15 @@
void __init smp_space_timers(unsigned int max_cpus)
{
int i;
- unsigned long half = tb_ticks_per_jiffy / 2;
- unsigned long offset = tb_ticks_per_jiffy / max_cpus;
u64 previous_tb = per_cpu(last_jiffy, boot_cpuid);
/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
previous_tb -= tb_ticks_per_jiffy;
- /*
- * The stolen time calculation for POWER5 shared-processor LPAR
- * systems works better if the two threads' timebase interrupts
- * are staggered by half a jiffy with respect to each other.
- */
+
for_each_possible_cpu(i) {
if (i == boot_cpuid)
continue;
- if (i == (boot_cpuid ^ 1))
- per_cpu(last_jiffy, i) =
- per_cpu(last_jiffy, boot_cpuid) - half;
- else if (i & 1)
- per_cpu(last_jiffy, i) =
- per_cpu(last_jiffy, i ^ 1) + half;
- else {
- previous_tb += offset;
- per_cpu(last_jiffy, i) = previous_tb;
- }
+ per_cpu(last_jiffy, i) = previous_tb;
}
}
#endif
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 450258d..0a486d4 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -23,7 +23,5 @@
endif
# Temporary hack until we have migrated to asm-powerpc
-ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_8xx) += rheap.o
obj-$(CONFIG_CPM2) += rheap.o
-endif
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 6c5c5dd..b2f6dcc 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -133,7 +133,7 @@
info->empty_slots--;
/* Initialize */
- blk->start = NULL;
+ blk->start = 0;
blk->size = 0;
blk->owner = NULL;
@@ -158,7 +158,7 @@
/* We assume that they are aligned properly */
size = blkn->size;
- s = (unsigned long)blkn->start;
+ s = blkn->start;
e = s + size;
/* Find the blocks immediately before and after the given one
@@ -170,7 +170,7 @@
list_for_each(l, &info->free_list) {
blk = list_entry(l, rh_block_t, list);
- bs = (unsigned long)blk->start;
+ bs = blk->start;
be = bs + blk->size;
if (next == NULL && s >= bs)
@@ -188,10 +188,10 @@
}
/* Now check if they are really adjacent */
- if (before != NULL && s != (unsigned long)before->start + before->size)
+ if (before && s != (before->start + before->size))
before = NULL;
- if (after != NULL && e != (unsigned long)after->start)
+ if (after && e != after->start)
after = NULL;
/* No coalescing; list insert and return */
@@ -216,7 +216,7 @@
/* Grow the after block backwards */
if (before == NULL && after != NULL) {
- after->start = (int8_t *)after->start - size;
+ after->start -= size;
after->size += size;
return;
}
@@ -321,14 +321,14 @@
}
/* Attach a free memory region, coalesces regions if adjuscent */
-int rh_attach_region(rh_info_t * info, void *start, int size)
+int rh_attach_region(rh_info_t * info, unsigned long start, int size)
{
rh_block_t *blk;
unsigned long s, e, m;
int r;
/* The region must be aligned */
- s = (unsigned long)start;
+ s = start;
e = s + size;
m = info->alignment - 1;
@@ -338,9 +338,12 @@
/* Round end down */
e = e & ~m;
+ if (IS_ERR_VALUE(e) || (e < s))
+ return -ERANGE;
+
/* Take final values */
- start = (void *)s;
- size = (int)(e - s);
+ start = s;
+ size = e - s;
/* Grow the blocks, if needed */
r = assure_empty(info, 1);
@@ -358,7 +361,7 @@
}
/* Detatch given address range, splits free block if needed. */
-void *rh_detach_region(rh_info_t * info, void *start, int size)
+unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size)
{
struct list_head *l;
rh_block_t *blk, *newblk;
@@ -366,10 +369,10 @@
/* Validate size */
if (size <= 0)
- return ERR_PTR(-EINVAL);
+ return (unsigned long) -EINVAL;
/* The region must be aligned */
- s = (unsigned long)start;
+ s = start;
e = s + size;
m = info->alignment - 1;
@@ -380,34 +383,34 @@
e = e & ~m;
if (assure_empty(info, 1) < 0)
- return ERR_PTR(-ENOMEM);
+ return (unsigned long) -ENOMEM;
blk = NULL;
list_for_each(l, &info->free_list) {
blk = list_entry(l, rh_block_t, list);
/* The range must lie entirely inside one free block */
- bs = (unsigned long)blk->start;
- be = (unsigned long)blk->start + blk->size;
+ bs = blk->start;
+ be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
blk = NULL;
}
if (blk == NULL)
- return ERR_PTR(-ENOMEM);
+ return (unsigned long) -ENOMEM;
/* Perfect fit */
if (bs == s && be == e) {
/* Delete from free list, release slot */
list_del(&blk->list);
release_slot(info, blk);
- return (void *)s;
+ return s;
}
/* blk still in free list, with updated start and/or size */
if (bs == s || be == e) {
if (bs == s)
- blk->start = (int8_t *)blk->start + size;
+ blk->start += size;
blk->size -= size;
} else {
@@ -416,25 +419,29 @@
/* the back free fragment */
newblk = get_slot(info);
- newblk->start = (void *)e;
+ newblk->start = e;
newblk->size = be - e;
list_add(&newblk->list, &blk->list);
}
- return (void *)s;
+ return s;
}
-void *rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner)
+/* Allocate a block of memory at the specified alignment. The value returned
+ * is an offset into the buffer initialized by rh_init(), or a negative number
+ * if there is an error.
+ */
+unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, const char *owner)
{
struct list_head *l;
rh_block_t *blk;
rh_block_t *newblk;
- void *start;
+ unsigned long start;
- /* Validate size, (must be power of two) */
+ /* Validate size, and alignment must be power of two */
if (size <= 0 || (alignment & (alignment - 1)) != 0)
- return ERR_PTR(-EINVAL);
+ return (unsigned long) -EINVAL;
/* given alignment larger that default rheap alignment */
if (alignment > info->alignment)
@@ -444,7 +451,7 @@
size = (size + (info->alignment - 1)) & ~(info->alignment - 1);
if (assure_empty(info, 1) < 0)
- return ERR_PTR(-ENOMEM);
+ return (unsigned long) -ENOMEM;
blk = NULL;
list_for_each(l, &info->free_list) {
@@ -455,7 +462,7 @@
}
if (blk == NULL)
- return ERR_PTR(-ENOMEM);
+ return (unsigned long) -ENOMEM;
/* Just fits */
if (blk->size == size) {
@@ -475,7 +482,7 @@
newblk->owner = owner;
/* blk still in free list, with updated start, size */
- blk->start = (int8_t *)blk->start + size;
+ blk->start += size;
blk->size -= size;
start = newblk->start;
@@ -486,19 +493,25 @@
/* this is no problem with the deallocator since */
/* we scan for pointers that lie in the blocks */
if (alignment > info->alignment)
- start = (void *)(((unsigned long)start + alignment - 1) &
- ~(alignment - 1));
+ start = (start + alignment - 1) & ~(alignment - 1);
return start;
}
-void *rh_alloc(rh_info_t * info, int size, const char *owner)
+/* Allocate a block of memory at the default alignment. The value returned is
+ * an offset into the buffer initialized by rh_init(), or a negative number if
+ * there is an error.
+ */
+unsigned long rh_alloc(rh_info_t * info, int size, const char *owner)
{
return rh_alloc_align(info, size, info->alignment, owner);
}
-/* allocate at precisely the given address */
-void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner)
+/* Allocate a block of memory at the given offset, rounded up to the default
+ * alignment. The value returned is an offset into the buffer initialized by
+ * rh_init(), or a negative number if there is an error.
+ */
+unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, const char *owner)
{
struct list_head *l;
rh_block_t *blk, *newblk1, *newblk2;
@@ -506,10 +519,10 @@
/* Validate size */
if (size <= 0)
- return ERR_PTR(-EINVAL);
+ return (unsigned long) -EINVAL;
/* The region must be aligned */
- s = (unsigned long)start;
+ s = start;
e = s + size;
m = info->alignment - 1;
@@ -520,20 +533,20 @@
e = e & ~m;
if (assure_empty(info, 2) < 0)
- return ERR_PTR(-ENOMEM);
+ return (unsigned long) -ENOMEM;
blk = NULL;
list_for_each(l, &info->free_list) {
blk = list_entry(l, rh_block_t, list);
/* The range must lie entirely inside one free block */
- bs = (unsigned long)blk->start;
- be = (unsigned long)blk->start + blk->size;
+ bs = blk->start;
+ be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
}
if (blk == NULL)
- return ERR_PTR(-ENOMEM);
+ return (unsigned long) -ENOMEM;
/* Perfect fit */
if (bs == s && be == e) {
@@ -551,7 +564,7 @@
/* blk still in free list, with updated start and/or size */
if (bs == s || be == e) {
if (bs == s)
- blk->start = (int8_t *)blk->start + size;
+ blk->start += size;
blk->size -= size;
} else {
@@ -560,14 +573,14 @@
/* The back free fragment */
newblk2 = get_slot(info);
- newblk2->start = (void *)e;
+ newblk2->start = e;
newblk2->size = be - e;
list_add(&newblk2->list, &blk->list);
}
newblk1 = get_slot(info);
- newblk1->start = (void *)s;
+ newblk1->start = s;
newblk1->size = e - s;
newblk1->owner = owner;
@@ -577,7 +590,11 @@
return start;
}
-int rh_free(rh_info_t * info, void *start)
+/* Deallocate the memory previously allocated by one of the rh_alloc functions.
+ * The return value is the size of the deallocated block, or a negative number
+ * if there is an error.
+ */
+int rh_free(rh_info_t * info, unsigned long start)
{
rh_block_t *blk, *blk2;
struct list_head *l;
@@ -642,7 +659,7 @@
return nr;
}
-int rh_set_owner(rh_info_t * info, void *start, const char *owner)
+int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner)
{
rh_block_t *blk, *blk2;
struct list_head *l;
@@ -684,8 +701,8 @@
nr = maxnr;
for (i = 0; i < nr; i++)
printk(KERN_INFO
- " 0x%p-0x%p (%u)\n",
- st[i].start, (int8_t *) st[i].start + st[i].size,
+ " 0x%lx-0x%lx (%u)\n",
+ st[i].start, st[i].start + st[i].size,
st[i].size);
printk(KERN_INFO "\n");
@@ -695,8 +712,8 @@
nr = maxnr;
for (i = 0; i < nr; i++)
printk(KERN_INFO
- " 0x%p-0x%p (%u) %s\n",
- st[i].start, (int8_t *) st[i].start + st[i].size,
+ " 0x%lx-0x%lx (%u) %s\n",
+ st[i].start, st[i].start + st[i].size,
st[i].size, st[i].owner != NULL ? st[i].owner : "");
printk(KERN_INFO "\n");
}
@@ -704,6 +721,6 @@
void rh_dump_blk(rh_info_t * info, rh_block_t * blk)
{
printk(KERN_INFO
- "blk @0x%p: 0x%p-0x%p (%u)\n",
- blk, blk->start, (int8_t *) blk->start + blk->size, blk->size);
+ "blk @0x%p: 0x%lx-0x%lx (%u)\n",
+ blk, blk->start, blk->start + blk->size, blk->size);
}
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 7b7fe2d..4a20d89 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -351,7 +351,7 @@
unsigned long hpte_r = hpte->r;
unsigned long hpte_v = hpte->v;
unsigned long avpn;
- int i, size, shift, penc, avpnm_bits;
+ int i, size, shift, penc;
if (!(hpte_v & HPTE_V_LARGE))
size = MMU_PAGE_4K;
@@ -376,31 +376,28 @@
}
}
- /*
- * FIXME, the code below works for 16M, 64K, and 4K pages as these
- * fall under the p<=23 rules for calculating the virtual address.
- * In the case of 16M pages, an extra bit is stolen from the AVPN
- * field to achieve the requisite 24 bits.
- *
- * Does not work for 16G pages or 1 TB segments.
- */
+ /* This works for all page sizes, and for 256M and 1T segments */
shift = mmu_psize_defs[size].shift;
- if (mmu_psize_defs[size].avpnm)
- avpnm_bits = __ilog2_u64(mmu_psize_defs[size].avpnm) + 1;
- else
- avpnm_bits = 0;
- if (shift - avpnm_bits <= 23) {
- avpn = HPTE_V_AVPN_VAL(hpte_v) << 23;
+ avpn = (HPTE_V_AVPN_VAL(hpte_v) & ~mmu_psize_defs[size].avpnm) << 23;
- if (shift < 23) {
- unsigned long vpi, pteg;
+ if (shift < 23) {
+ unsigned long vpi, vsid, pteg;
- pteg = slot / HPTES_PER_GROUP;
- if (hpte_v & HPTE_V_SECONDARY)
- pteg = ~pteg;
+ pteg = slot / HPTES_PER_GROUP;
+ if (hpte_v & HPTE_V_SECONDARY)
+ pteg = ~pteg;
+ switch (hpte_v >> HPTE_V_SSIZE_SHIFT) {
+ case MMU_SEGSIZE_256M:
vpi = ((avpn >> 28) ^ pteg) & htab_hash_mask;
- avpn |= (vpi << mmu_psize_defs[size].shift);
+ break;
+ case MMU_SEGSIZE_1T:
+ vsid = avpn >> 40;
+ vpi = (vsid ^ (vsid << 25) ^ pteg) & htab_hash_mask;
+ break;
+ default:
+ avpn = vpi = size = 0;
}
+ avpn |= (vpi << mmu_psize_defs[size].shift);
}
*va = avpn;
diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
index 32e9e94..96970ac 100644
--- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
@@ -40,7 +40,9 @@
*/
static void __init mpc8313_rdb_setup_arch(void)
{
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index b0b22bb..3db68b7 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -44,7 +44,9 @@
*/
static void __init mpc832x_rdb_setup_arch(void)
{
+#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 3c009f6..40a0194 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -50,7 +50,9 @@
*/
static void __init mpc834x_itx_setup_arch(void)
{
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc834x_itx_setup_arch()", 0);
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 8aa9a93..10394b2 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -120,7 +120,9 @@
*/
static void __init mpc834x_mds_setup_arch(void)
{
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 9087756..1051702 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -168,7 +168,7 @@
{
unsigned short temp;
struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned char irq2pin[16];
+ unsigned char irq2pin[16], c;
unsigned long pirq_map_word = 0;
u32 irq;
int i;
@@ -288,6 +288,11 @@
outb(0x1e, 0x4d1);
#undef ULI1575_SET_DEV_IRQ
+
+ /* Disable the HD interface and enable the AC97 interface. */
+ pci_read_config_byte(dev, 0xb8, &c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0xb8, c);
}
static void __devinit quirk_uli5288(struct pci_dev *dev)
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 8c20f0f..812bf56 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -43,12 +43,10 @@
unsigned long ctrl, thread_switch_control;
/*
- * We need to hard disable interrupts, but we also need to mark them
- * hard disabled in the PACA so that the local_irq_enable() done by
- * our caller upon return propertly hard enables.
+ * We need to hard disable interrupts, the local_irq_enable() done by
+ * our caller upon return will hard re-enable.
*/
hard_irq_disable();
- get_paca()->hard_enabled = 0;
ctrl = mfspr(SPRN_CTRLF);
diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c
index d1adf34..e9ac19c 100644
--- a/arch/powerpc/platforms/celleb/pci.c
+++ b/arch/powerpc/platforms/celleb/pci.c
@@ -457,6 +457,7 @@
pr_debug("PCI: celleb_setup_phb() %s\n", name);
phb_set_bus_ranges(dev, phb);
+ phb->buid = 1;
if (strcmp(name, "epci") == 0) {
phb->ops = &celleb_epci_ops;
diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c
index fb23d53..c4b0110 100644
--- a/arch/powerpc/platforms/celleb/scc_epci.c
+++ b/arch/powerpc/platforms/celleb/scc_epci.c
@@ -133,13 +133,13 @@
}
static volatile void __iomem *celleb_epci_make_config_addr(
+ struct pci_bus *bus,
struct pci_controller *hose,
unsigned int devfn, int where)
{
volatile void __iomem *addr;
- struct pci_bus *bus = hose->bus;
- if (bus->self)
+ if (bus != hose->bus)
addr = celleb_epci_get_epci_cfg(hose) +
(((bus->number & 0xff) << 16)
| ((devfn & 0xff) << 8)
@@ -193,7 +193,7 @@
} else {
clear_and_disable_master_abort_interrupt(hose);
- addr = celleb_epci_make_config_addr(hose, devfn, where);
+ addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
switch (size) {
case 1:
@@ -257,7 +257,7 @@
} else {
clear_and_disable_master_abort_interrupt(hose);
- addr = celleb_epci_make_config_addr(hose, devfn, where);
+ addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
switch (size) {
case 1:
diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c
index 596ab2a..5e9f7f1 100644
--- a/arch/powerpc/platforms/celleb/setup.c
+++ b/arch/powerpc/platforms/celleb/setup.c
@@ -80,7 +80,7 @@
return 0;
}
-__setup("celleb_machine_type_hack", celleb_machine_type_hack);
+__setup("celleb_machine_type_hack=", celleb_machine_type_hack);
static void celleb_progress(char *s, unsigned short hex)
{
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 8f3c2a7..f2d2626 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -31,6 +31,14 @@
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
+
+config PPC_PRPMC2800
+ bool "Motorola-PrPMC2800"
+ select MV64X60
+ select NOT_COHERENT_CACHE
+ select WANT_DEVICE_TREE
+ help
+ This option enables support for the Motorola PrPMC2800 board
endchoice
config TSI108_BRIDGE
@@ -46,6 +54,11 @@
select PPC_INDIRECT_PCI
default y
+config MV64X60
+ bool
+ select PPC_INDIRECT_PCI
+ select CONFIG_CHECK_CACHE_COHERENCY
+
config MPC10X_OPENPIC
bool
depends on LINKSTATION
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index b39fe4f..844947c 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
+obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
new file mode 100644
index 0000000..5342095
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -0,0 +1,171 @@
+/*
+ * Board setup routines for the Motorola PrPMC2800
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/kexec.h>
+
+#include <mm/mmu_decl.h>
+
+#include <sysdev/mv64x60.h>
+
+#define MV64x60_MPP_CNTL_0 0x0000
+#define MV64x60_MPP_CNTL_2 0x0008
+
+#define MV64x60_GPP_IO_CNTL 0x0000
+#define MV64x60_GPP_LEVEL_CNTL 0x0010
+#define MV64x60_GPP_VALUE_SET 0x0018
+
+#define PLATFORM_NAME_MAX 32
+
+static char prpmc2800_platform_name[PLATFORM_NAME_MAX];
+
+static void __iomem *mv64x60_mpp_reg_base;
+static void __iomem *mv64x60_gpp_reg_base;
+
+static void __init prpmc2800_setup_arch(void)
+{
+ struct device_node *np;
+ phys_addr_t paddr;
+ const unsigned int *reg;
+ const unsigned int *prop;
+
+ /*
+ * ioremap mpp and gpp registers in case they are later
+ * needed by prpmc2800_reset_board().
+ */
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ reg = of_get_property(np, "reg", NULL);
+ paddr = of_translate_address(np, reg);
+ of_node_put(np);
+ mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ reg = of_get_property(np, "reg", NULL);
+ paddr = of_translate_address(np, reg);
+ of_node_put(np);
+ mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ prop = of_get_property(np, "clock-frequency", NULL);
+ if (prop)
+ loops_per_jiffy = *prop / HZ;
+ of_node_put(np);
+
+#ifdef CONFIG_PCI
+ mv64x60_pci_init();
+#endif
+
+ printk("Motorola %s\n", prpmc2800_platform_name);
+}
+
+static void prpmc2800_reset_board(void)
+{
+ u32 temp;
+
+ local_irq_disable();
+
+ temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
+ temp &= 0xFFFF0FFF;
+ out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+ temp |= 0x00000004;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+ temp |= 0x00000004;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+ temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
+ temp &= 0xFFFF0FFF;
+ out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+ temp |= 0x00080000;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+ temp |= 0x00080000;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
+}
+
+static void prpmc2800_restart(char *cmd)
+{
+ volatile ulong i = 10000000;
+
+ prpmc2800_reset_board();
+
+ while (i-- > 0);
+ panic("restart failed\n");
+}
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define PPRPM2800_COHERENCY_SETTING "off"
+#else
+#define PPRPM2800_COHERENCY_SETTING "on"
+#endif
+
+void prpmc2800_show_cpuinfo(struct seq_file *m)
+{
+ uint memsize = total_memory;
+
+ seq_printf(m, "Vendor\t\t: Motorola\n");
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+ seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init prpmc2800_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ unsigned long len = PLATFORM_NAME_MAX;
+ void *m;
+
+ if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800"))
+ return 0;
+
+ /* Update ppc_md.name with name from dt */
+ m = of_get_flat_dt_prop(root, "model", &len);
+ if (m)
+ strncpy(prpmc2800_platform_name, m,
+ min((int)len, PLATFORM_NAME_MAX - 1));
+
+ return 1;
+}
+
+define_machine(prpmc2800){
+ .name = prpmc2800_platform_name,
+ .probe = prpmc2800_probe,
+ .setup_arch = prpmc2800_setup_arch,
+ .show_cpuinfo = prpmc2800_show_cpuinfo,
+ .init_IRQ = mv64x60_init_irq,
+ .get_irq = mv64x60_get_irq,
+ .restart = prpmc2800_restart,
+ .calibrate_decr = generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
+#endif
+};
diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c
index 5985ce0..03cd45d 100644
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/irq.h>
#include <asm/machdep.h>
#include <asm/reg.h>
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index c989493..9353967 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -99,6 +99,7 @@
while(1);
}
+#ifdef CONFIG_FB_PS3
static void prealloc(struct ps3_prealloc *p)
{
if (!p->size)
@@ -115,7 +116,6 @@
p->address);
}
-#ifdef CONFIG_FB_PS3
struct ps3_prealloc ps3fb_videomemory = {
.name = "ps3fb videomemory",
.size = CONFIG_FB_PS3_DEFAULT_SIZE_M*1024*1024,
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index 8729348..53416ec 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -118,9 +118,11 @@
DBG("%s:%d: (%d, %d) => virq %u\n",
__func__, __LINE__, cpu, i, virqs[i]);
+ result = request_irq(virqs[i], ipi_function_handler,
+ IRQF_DISABLED, names[i], (void*)(long)i);
- request_irq(virqs[i], ipi_function_handler, IRQF_DISABLED,
- names[i], (void*)(long)i);
+ if (result)
+ virqs[i] = NO_IRQ;
}
ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]);
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 3c48cce..6bda510 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -274,13 +274,13 @@
static int ps3_map_sg(struct device *_dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction)
{
- struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev);
- int i;
-
#if defined(CONFIG_PS3_DYNAMIC_DMA)
BUG_ON("do");
return -EPERM;
#else
+ struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev);
+ int i;
+
for (i = 0; i < nents; i++, sg++) {
int result = ps3_dma_map(dev->d_region,
page_to_phys(sg->page) + sg->offset, sg->length,
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 093438b..5f3e6d8 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -76,7 +76,7 @@
*/
#define EEH_MAX_FAILS 2100000
-/* Time to wait for a PCI slot to retport status, in milliseconds */
+/* Time to wait for a PCI slot to report status, in milliseconds */
#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
/* RTAS tokens */
@@ -95,11 +95,18 @@
/* Lock to avoid races due to multiple reports of an error */
static DEFINE_SPINLOCK(confirm_error_lock);
-/* Buffer for reporting slot-error-detail rtas calls */
+/* Buffer for reporting slot-error-detail rtas calls. Its here
+ * in BSS, and not dynamically alloced, so that it ends up in
+ * RMO where RTAS can access it.
+ */
static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(slot_errbuf_lock);
static int eeh_error_buf_size;
+/* Buffer for reporting pci register dumps. Its here in BSS, and
+ * not dynamically alloced, so that it ends up in RMO where RTAS
+ * can access it.
+ */
#define EEH_PCI_REGS_LOG_LEN 4096
static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
@@ -218,7 +225,7 @@
void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
{
size_t loglen = 0;
- memset(pci_regs_buf, 0, EEH_PCI_REGS_LOG_LEN);
+ pci_regs_buf[0] = 0;
rtas_pci_enable(pdn, EEH_THAW_MMIO);
loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index f07d849..161a584 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -378,8 +378,9 @@
/* Since rtas may enable MMIO when posting the error log,
* don't post the error log until after all dev drivers
- * have been informed. */
- eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
+ * have been informed.
+ */
+ eeh_slot_error_detail(frozen_pdn, EEH_LOG_TEMP_FAILURE);
/* If all device drivers were EEH-unaware, then shut
* down all of the device drivers, and hope they
@@ -470,7 +471,7 @@
location, drv_str, pci_str);
perm_error:
- eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
+ eeh_slot_error_detail(frozen_pdn, EEH_LOG_PERM_FAILURE);
/* Notify all devices that they're about to go down. */
pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index eec684a..be17d23 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -520,7 +520,6 @@
dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table;
return;
}
- DBG(" found DMA window, table: %p\n", pci->iommu_table);
pci = PCI_DN(pdn);
if (!pci->iommu_table) {
@@ -534,6 +533,8 @@
pci->iommu_table = iommu_init_table(tbl, pci->phb->node);
DBG(" created table: %p\n", pci->iommu_table);
+ } else {
+ DBG(" found DMA window, table: %p\n", pci->iommu_table);
}
dev->dev.archdata.dma_data = pci->iommu_table;
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index af26856..412a5e7 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -12,6 +12,7 @@
#include <asm/firmware.h>
#include <asm/kexec.h>
#include <asm/mpic.h>
+#include <asm/smp.h>
#include "pseries.h"
#include "xics.h"
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9ce775c..c3ce0bd 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -16,6 +16,8 @@
obj-$(CONFIG_FSL_PCIE) += fsl_pcie.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
+mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
+obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o
# contains only the suspend handler for time
obj-$(CONFIG_PM) += timer.o
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index 9b4fafd..4f67b89 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -330,7 +330,7 @@
* with the processor and the microcode patches applied / activated.
* But the following should be at least safe.
*/
- rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+ rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
}
/*
@@ -338,9 +338,9 @@
* This function returns an offset into the DPRAM area.
* Use cpm_dpram_addr() to get the virtual address of the area.
*/
-uint cpm_dpalloc(uint size, uint align)
+unsigned long cpm_dpalloc(uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
@@ -352,30 +352,30 @@
}
EXPORT_SYMBOL(cpm_dpalloc);
-int cpm_dpfree(uint offset)
+int cpm_dpfree(unsigned long offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ ret = rh_free(&cpm_dpmem_info, offset);
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return ret;
}
EXPORT_SYMBOL(cpm_dpfree);
-uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
- return (uint)start;
+ return start;
}
EXPORT_SYMBOL(cpm_dpalloc_fixed);
@@ -385,7 +385,7 @@
}
EXPORT_SYMBOL(cpm_dpdump);
-void *cpm_dpram_addr(uint offset)
+void *cpm_dpram_addr(unsigned long offset)
{
return (void *)(dpram_vbase + offset);
}
diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index ec26599..9244129 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -248,15 +248,14 @@
* varies with the processor and the microcode patches activated.
* But the following should be at least safe.
*/
- rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
- CPM_DATAONLY_SIZE);
+ rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
}
/* This function returns an index into the DPRAM area.
*/
-uint cpm_dpalloc(uint size, uint align)
+unsigned long cpm_dpalloc(uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
@@ -268,13 +267,13 @@
}
EXPORT_SYMBOL(cpm_dpalloc);
-int cpm_dpfree(uint offset)
+int cpm_dpfree(unsigned long offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ ret = rh_free(&cpm_dpmem_info, offset);
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return ret;
@@ -282,17 +281,17 @@
EXPORT_SYMBOL(cpm_dpfree);
/* not sure if this is ever needed */
-uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
- return (uint)start;
+ return start;
}
EXPORT_SYMBOL(cpm_dpalloc_fixed);
@@ -302,7 +301,7 @@
}
EXPORT_SYMBOL(cpm_dpdump);
-void *cpm_dpram_addr(uint offset)
+void *cpm_dpram_addr(unsigned long offset)
{
return (void *)(im_dprambase + offset);
}
diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h
new file mode 100644
index 0000000..2ff0b4e
--- /dev/null
+++ b/arch/powerpc/sysdev/mv64x60.h
@@ -0,0 +1,11 @@
+#ifndef __MV64X60_H__
+#define __MV64X60_H__
+
+#include <linux/init.h>
+
+extern void __init mv64x60_init_irq(void);
+extern unsigned int mv64x60_get_irq(void);
+
+extern void __init mv64x60_pci_init(void);
+
+#endif /* __MV64X60_H__ */
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
new file mode 100644
index 0000000..4b0a9c8
--- /dev/null
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -0,0 +1,422 @@
+/*
+ * Platform device setup for Marvell mv64360/mv64460 host bridges (Discovery)
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include <asm/prom.h>
+
+/*
+ * These functions provide the necessary setup for the mv64x60 drivers.
+ * These drivers are unusual in that they work on both the MIPS and PowerPC
+ * architectures. Because of that, the drivers do not support the normal
+ * PowerPC of_platform_bus_type. They support platform_bus_type instead.
+ */
+
+/*
+ * Create MPSC platform devices
+ */
+static int __init mv64x60_mpsc_register_shared_pdev(struct device_node *np)
+{
+ struct platform_device *pdev;
+ struct resource r[2];
+ struct mpsc_shared_pdata pdata;
+ const phandle *ph;
+ struct device_node *mpscrouting, *mpscintr;
+ int err;
+
+ ph = of_get_property(np, "mpscrouting", NULL);
+ mpscrouting = of_find_node_by_phandle(*ph);
+ if (!mpscrouting)
+ return -ENODEV;
+
+ err = of_address_to_resource(mpscrouting, 0, &r[0]);
+ of_node_put(mpscrouting);
+ if (err)
+ return err;
+
+ ph = of_get_property(np, "mpscintr", NULL);
+ mpscintr = of_find_node_by_phandle(*ph);
+ if (!mpscintr)
+ return -ENODEV;
+
+ err = of_address_to_resource(mpscintr, 0, &r[1]);
+ of_node_put(mpscintr);
+ if (err)
+ return err;
+
+ memset(&pdata, 0, sizeof(pdata));
+
+ pdev = platform_device_alloc(MPSC_SHARED_NAME, 0);
+ if (!pdev)
+ return -ENOMEM;
+
+ err = platform_device_add_resources(pdev, r, 2);
+ if (err)
+ goto error;
+
+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+ if (err)
+ goto error;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto error;
+
+ return 0;
+
+error:
+ platform_device_put(pdev);
+ return err;
+}
+
+
+static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
+{
+ struct resource r[5];
+ struct mpsc_pdata pdata;
+ struct platform_device *pdev;
+ const unsigned int *prop;
+ const phandle *ph;
+ struct device_node *sdma, *brg;
+ int err;
+ int port_number;
+
+ /* only register the shared platform device the first time through */
+ if (id == 0 && (err = mv64x60_mpsc_register_shared_pdev(np)))
+ return err;
+
+ memset(r, 0, sizeof(r));
+
+ err = of_address_to_resource(np, 0, &r[0]);
+ if (err)
+ return err;
+
+ of_irq_to_resource(np, 0, &r[4]);
+
+ ph = of_get_property(np, "sdma", NULL);
+ sdma = of_find_node_by_phandle(*ph);
+ if (!sdma)
+ return -ENODEV;
+
+ of_irq_to_resource(sdma, 0, &r[3]);
+ err = of_address_to_resource(sdma, 0, &r[1]);
+ of_node_put(sdma);
+ if (err)
+ return err;
+
+ ph = of_get_property(np, "brg", NULL);
+ brg = of_find_node_by_phandle(*ph);
+ if (!brg)
+ return -ENODEV;
+
+ err = of_address_to_resource(brg, 0, &r[2]);
+ of_node_put(brg);
+ if (err)
+ return err;
+
+ prop = of_get_property(np, "block-index", NULL);
+ if (!prop)
+ return -ENODEV;
+ port_number = *(int *)prop;
+
+ memset(&pdata, 0, sizeof(pdata));
+
+ pdata.cache_mgmt = 1; /* All current revs need this set */
+
+ prop = of_get_property(np, "max_idle", NULL);
+ if (prop)
+ pdata.max_idle = *prop;
+
+ prop = of_get_property(brg, "current-speed", NULL);
+ if (prop)
+ pdata.default_baud = *prop;
+
+ /* Default is 8 bits, no parity, no flow control */
+ pdata.default_bits = 8;
+ pdata.default_parity = 'n';
+ pdata.default_flow = 'n';
+
+ prop = of_get_property(np, "chr_1", NULL);
+ if (prop)
+ pdata.chr_1_val = *prop;
+
+ prop = of_get_property(np, "chr_2", NULL);
+ if (prop)
+ pdata.chr_2_val = *prop;
+
+ prop = of_get_property(np, "chr_10", NULL);
+ if (prop)
+ pdata.chr_10_val = *prop;
+
+ prop = of_get_property(np, "mpcr", NULL);
+ if (prop)
+ pdata.mpcr_val = *prop;
+
+ prop = of_get_property(brg, "bcr", NULL);
+ if (prop)
+ pdata.bcr_val = *prop;
+
+ pdata.brg_can_tune = 1; /* All current revs need this set */
+
+ prop = of_get_property(brg, "clock-src", NULL);
+ if (prop)
+ pdata.brg_clk_src = *prop;
+
+ prop = of_get_property(brg, "clock-frequency", NULL);
+ if (prop)
+ pdata.brg_clk_freq = *prop;
+
+ pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number);
+ if (!pdev)
+ return -ENOMEM;
+
+ err = platform_device_add_resources(pdev, r, 5);
+ if (err)
+ goto error;
+
+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+ if (err)
+ goto error;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto error;
+
+ return 0;
+
+error:
+ platform_device_put(pdev);
+ return err;
+}
+
+/*
+ * Create mv64x60_eth platform devices
+ */
+static int __init eth_register_shared_pdev(struct device_node *np)
+{
+ struct platform_device *pdev;
+ struct resource r[1];
+ int err;
+
+ np = of_get_parent(np);
+ if (!np)
+ return -ENODEV;
+
+ err = of_address_to_resource(np, 0, &r[0]);
+ of_node_put(np);
+ if (err)
+ return err;
+
+ pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
+ r, 1);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
+}
+
+static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
+{
+ struct resource r[1];
+ struct mv643xx_eth_platform_data pdata;
+ struct platform_device *pdev;
+ struct device_node *phy;
+ const u8 *mac_addr;
+ const int *prop;
+ const phandle *ph;
+ int err;
+
+ /* only register the shared platform device the first time through */
+ if (id == 0 && (err = eth_register_shared_pdev(np)))
+ return err;;
+
+ memset(r, 0, sizeof(r));
+ of_irq_to_resource(np, 0, &r[0]);
+
+ memset(&pdata, 0, sizeof(pdata));
+
+ prop = of_get_property(np, "block-index", NULL);
+ if (!prop)
+ return -ENODEV;
+ pdata.port_number = *prop;
+
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(pdata.mac_addr, mac_addr, 6);
+
+ prop = of_get_property(np, "speed", NULL);
+ if (prop)
+ pdata.speed = *prop;
+
+ prop = of_get_property(np, "tx_queue_size", NULL);
+ if (prop)
+ pdata.tx_queue_size = *prop;
+
+ prop = of_get_property(np, "rx_queue_size", NULL);
+ if (prop)
+ pdata.rx_queue_size = *prop;
+
+ prop = of_get_property(np, "tx_sram_addr", NULL);
+ if (prop)
+ pdata.tx_sram_addr = *prop;
+
+ prop = of_get_property(np, "tx_sram_size", NULL);
+ if (prop)
+ pdata.tx_sram_size = *prop;
+
+ prop = of_get_property(np, "rx_sram_addr", NULL);
+ if (prop)
+ pdata.rx_sram_addr = *prop;
+
+ prop = of_get_property(np, "rx_sram_size", NULL);
+ if (prop)
+ pdata.rx_sram_size = *prop;
+
+ ph = of_get_property(np, "phy", NULL);
+ if (!ph)
+ return -ENODEV;
+
+ phy = of_find_node_by_phandle(*ph);
+ if (phy == NULL)
+ return -ENODEV;
+
+ prop = of_get_property(phy, "reg", NULL);
+ if (prop) {
+ pdata.force_phy_addr = 1;
+ pdata.phy_addr = *prop;
+ }
+
+ of_node_put(phy);
+
+ pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
+ if (!pdev)
+ return -ENOMEM;
+
+ err = platform_device_add_resources(pdev, r, 1);
+ if (err)
+ goto error;
+
+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+ if (err)
+ goto error;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto error;
+
+ return 0;
+
+error:
+ platform_device_put(pdev);
+ return err;
+}
+
+/*
+ * Create mv64x60_i2c platform devices
+ */
+static int __init mv64x60_i2c_device_setup(struct device_node *np, int id)
+{
+ struct resource r[2];
+ struct platform_device *pdev;
+ struct mv64xxx_i2c_pdata pdata;
+ const unsigned int *prop;
+ int err;
+
+ memset(r, 0, sizeof(r));
+
+ err = of_address_to_resource(np, 0, &r[0]);
+ if (err)
+ return err;
+
+ of_irq_to_resource(np, 0, &r[1]);
+
+ memset(&pdata, 0, sizeof(pdata));
+
+ prop = of_get_property(np, "freq_m", NULL);
+ if (!prop)
+ return -ENODEV;
+ pdata.freq_m = *prop;
+
+ prop = of_get_property(np, "freq_n", NULL);
+ if (!prop)
+ return -ENODEV;
+ pdata.freq_n = *prop;
+
+ prop = of_get_property(np, "timeout", NULL);
+ if (prop)
+ pdata.timeout = *prop;
+ else
+ pdata.timeout = 1000; /* 1 second */
+
+ prop = of_get_property(np, "retries", NULL);
+ if (prop)
+ pdata.retries = *prop;
+ else
+ pdata.retries = 1;
+
+ pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
+ if (!pdev)
+ return -ENOMEM;
+
+ err = platform_device_add_resources(pdev, r, 2);
+ if (err)
+ goto error;
+
+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+ if (err)
+ goto error;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto error;
+
+ return 0;
+
+error:
+ platform_device_put(pdev);
+ return err;
+}
+
+static int __init mv64x60_device_setup(void)
+{
+ struct device_node *np = NULL;
+ int id;
+ int err;
+
+ for (id = 0;
+ (np = of_find_compatible_node(np, "serial", "marvell,mpsc")); id++)
+ if ((err = mv64x60_mpsc_device_setup(np, id)))
+ goto error;
+
+ for (id = 0;
+ (np = of_find_compatible_node(np, "network",
+ "marvell,mv64x60-eth"));
+ id++)
+ if ((err = mv64x60_eth_device_setup(np, id)))
+ goto error;
+
+ for (id = 0;
+ (np = of_find_compatible_node(np, "i2c", "marvell,mv64x60-i2c"));
+ id++)
+ if ((err = mv64x60_i2c_device_setup(np, id)))
+ goto error;
+
+ return 0;
+
+error:
+ of_node_put(np);
+ return err;
+}
+arch_initcall(mv64x60_device_setup);
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
new file mode 100644
index 0000000..b5aef4c
--- /dev/null
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -0,0 +1,172 @@
+/*
+ * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
+
+#ifdef CONFIG_SYSFS
+/* 32-bit hex or dec stringified number + '\n' */
+#define MV64X60_VAL_LEN_MAX 11
+#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
+
+static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct pci_dev *phb;
+ u32 v;
+
+ if (off > 0)
+ return 0;
+ if (count < MV64X60_VAL_LEN_MAX)
+ return -EINVAL;
+
+ phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ if (!phb)
+ return -ENODEV;
+ pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
+ pci_dev_put(phb);
+
+ return sprintf(buf, "0x%08x\n", v);
+}
+
+static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct pci_dev *phb;
+ u32 v;
+
+ if (off > 0)
+ return 0;
+ if (count <= 0)
+ return -EINVAL;
+
+ if (sscanf(buf, "%i", &v) != 1)
+ return -EINVAL;
+
+ phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ if (!phb)
+ return -ENODEV;
+ pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
+ pci_dev_put(phb);
+
+ return count;
+}
+
+static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
+ .attr = {
+ .name = "hs_reg",
+ .mode = S_IRUGO | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = MV64X60_VAL_LEN_MAX,
+ .read = mv64x60_hs_reg_read,
+ .write = mv64x60_hs_reg_write,
+};
+
+static int __init mv64x60_sysfs_init(void)
+{
+ struct device_node *np;
+ struct platform_device *pdev;
+ const unsigned int *prop;
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+ if (!np)
+ return 0;
+
+ prop = of_get_property(np, "hs_reg_valid", NULL);
+ of_node_put(np);
+
+ pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
+}
+
+subsys_initcall(mv64x60_sysfs_init);
+
+#endif /* CONFIG_SYSFS */
+
+static void __init mv64x60_pci_fixup_early(struct pci_dev *dev)
+{
+ /*
+ * Set the host bridge hdr_type to an invalid value so that
+ * pci_setup_device() will ignore the host bridge.
+ */
+ dev->hdr_type = PCI_HEADER_TYPE_INVALID;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
+ mv64x60_pci_fixup_early);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
+ mv64x60_pci_fixup_early);
+
+static int __init mv64x60_add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ const int *bus_range;
+ int primary;
+
+ memset(&rsrc, 0, sizeof(rsrc));
+
+ /* Fetch host bridge registers address */
+ if (of_address_to_resource(dev, 0, &rsrc)) {
+ printk(KERN_ERR "No PCI reg property in device tree\n");
+ return -ENODEV;
+ }
+
+ /* Get bus range if any */
+ bus_range = of_get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+
+ hose->arch_data = dev;
+ hose->set_cfg_type = 1;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ setup_indirect_pci(hose, rsrc.start, rsrc.start + 4);
+ hose->bus_offset = hose->first_busno;
+
+ printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
+ "Firmware bus number: %d->%d\n",
+ (unsigned long long)rsrc.start, hose->first_busno,
+ hose->last_busno);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ primary = (hose->first_busno == 0);
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ return 0;
+}
+
+void __init mv64x60_pci_init(void)
+{
+ struct device_node *np = NULL;
+
+ while ((np = of_find_compatible_node(np, "pci", "marvell,mv64x60-pci")))
+ mv64x60_add_bridge(np);
+}
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
new file mode 100644
index 0000000..01d3162
--- /dev/null
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -0,0 +1,305 @@
+/*
+ * Interrupt handling for Marvell mv64360/mv64460 host bridges (Discovery)
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#include "mv64x60.h"
+
+/* Interrupt Controller Interface Registers */
+#define MV64X60_IC_MAIN_CAUSE_LO 0x0004
+#define MV64X60_IC_MAIN_CAUSE_HI 0x000c
+#define MV64X60_IC_CPU0_INTR_MASK_LO 0x0014
+#define MV64X60_IC_CPU0_INTR_MASK_HI 0x001c
+#define MV64X60_IC_CPU0_SELECT_CAUSE 0x0024
+
+#define MV64X60_HIGH_GPP_GROUPS 0x0f000000
+#define MV64X60_SELECT_CAUSE_HIGH 0x40000000
+
+/* General Purpose Pins Controller Interface Registers */
+#define MV64x60_GPP_INTR_CAUSE 0x0008
+#define MV64x60_GPP_INTR_MASK 0x000c
+
+#define MV64x60_LEVEL1_LOW 0
+#define MV64x60_LEVEL1_HIGH 1
+#define MV64x60_LEVEL1_GPP 2
+
+#define MV64x60_LEVEL1_MASK 0x00000060
+#define MV64x60_LEVEL1_OFFSET 5
+
+#define MV64x60_LEVEL2_MASK 0x0000001f
+
+#define MV64x60_NUM_IRQS 96
+
+static DEFINE_SPINLOCK(mv64x60_lock);
+
+static void __iomem *mv64x60_irq_reg_base;
+static void __iomem *mv64x60_gpp_reg_base;
+
+/*
+ * Interrupt Controller Handling
+ *
+ * The interrupt controller handles three groups of interrupts:
+ * main low: IRQ0-IRQ31
+ * main high: IRQ32-IRQ63
+ * gpp: IRQ64-IRQ95
+ *
+ * This code handles interrupts in two levels. Level 1 selects the
+ * interrupt group, and level 2 selects an IRQ within that group.
+ * Each group has its own irq_chip structure.
+ */
+
+static u32 mv64x60_cached_low_mask;
+static u32 mv64x60_cached_high_mask = MV64X60_HIGH_GPP_GROUPS;
+static u32 mv64x60_cached_gpp_mask;
+
+static struct irq_host *mv64x60_irq_host;
+
+/*
+ * mv64x60_chip_low functions
+ */
+
+static void mv64x60_mask_low(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_low_mask &= ~(1 << level2);
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
+ mv64x60_cached_low_mask);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO);
+}
+
+static void mv64x60_unmask_low(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_low_mask |= 1 << level2;
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
+ mv64x60_cached_low_mask);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO);
+}
+
+static struct irq_chip mv64x60_chip_low = {
+ .name = "mv64x60_low",
+ .mask = mv64x60_mask_low,
+ .mask_ack = mv64x60_mask_low,
+ .unmask = mv64x60_unmask_low,
+};
+
+/*
+ * mv64x60_chip_high functions
+ */
+
+static void mv64x60_mask_high(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_high_mask &= ~(1 << level2);
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
+ mv64x60_cached_high_mask);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI);
+}
+
+static void mv64x60_unmask_high(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_high_mask |= 1 << level2;
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
+ mv64x60_cached_high_mask);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI);
+}
+
+static struct irq_chip mv64x60_chip_high = {
+ .name = "mv64x60_high",
+ .mask = mv64x60_mask_high,
+ .mask_ack = mv64x60_mask_high,
+ .unmask = mv64x60_unmask_high,
+};
+
+/*
+ * mv64x60_chip_gpp functions
+ */
+
+static void mv64x60_mask_gpp(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_gpp_mask &= ~(1 << level2);
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
+ mv64x60_cached_gpp_mask);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK);
+}
+
+static void mv64x60_mask_ack_gpp(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_gpp_mask &= ~(1 << level2);
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
+ mv64x60_cached_gpp_mask);
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE,
+ ~(1 << level2));
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE);
+}
+
+static void mv64x60_unmask_gpp(unsigned int virq)
+{
+ int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ mv64x60_cached_gpp_mask |= 1 << level2;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
+ mv64x60_cached_gpp_mask);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+ (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK);
+}
+
+static struct irq_chip mv64x60_chip_gpp = {
+ .name = "mv64x60_gpp",
+ .mask = mv64x60_mask_gpp,
+ .mask_ack = mv64x60_mask_ack_gpp,
+ .unmask = mv64x60_unmask_gpp,
+};
+
+/*
+ * mv64x60_host_ops functions
+ */
+
+static int mv64x60_host_match(struct irq_host *h, struct device_node *np)
+{
+ return mv64x60_irq_host->host_data == np;
+}
+
+static struct irq_chip *mv64x60_chips[] = {
+ [MV64x60_LEVEL1_LOW] = &mv64x60_chip_low,
+ [MV64x60_LEVEL1_HIGH] = &mv64x60_chip_high,
+ [MV64x60_LEVEL1_GPP] = &mv64x60_chip_gpp,
+};
+
+static int mv64x60_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ int level1;
+
+ get_irq_desc(virq)->status |= IRQ_LEVEL;
+
+ level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET;
+ BUG_ON(level1 > MV64x60_LEVEL1_GPP);
+ set_irq_chip_and_handler(virq, mv64x60_chips[level1], handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_host_ops mv64x60_host_ops = {
+ .match = mv64x60_host_match,
+ .map = mv64x60_host_map,
+};
+
+/*
+ * Global functions
+ */
+
+void __init mv64x60_init_irq(void)
+{
+ struct device_node *np;
+ phys_addr_t paddr;
+ unsigned int size;
+ const unsigned int *reg;
+ unsigned long flags;
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ reg = of_get_property(np, "reg", &size);
+ paddr = of_translate_address(np, reg);
+ mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+ of_node_put(np);
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+ reg = of_get_property(np, "reg", &size);
+ paddr = of_translate_address(np, reg);
+ of_node_put(np);
+ mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
+
+ mv64x60_irq_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, MV64x60_NUM_IRQS,
+ &mv64x60_host_ops, MV64x60_NUM_IRQS);
+
+ mv64x60_irq_host->host_data = np;
+
+ spin_lock_irqsave(&mv64x60_lock, flags);
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
+ mv64x60_cached_gpp_mask);
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
+ mv64x60_cached_low_mask);
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
+ mv64x60_cached_high_mask);
+
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, 0);
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_LO, 0);
+ out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_HI, 0);
+ spin_unlock_irqrestore(&mv64x60_lock, flags);
+}
+
+unsigned int mv64x60_get_irq(void)
+{
+ u32 cause;
+ int level1;
+ irq_hw_number_t hwirq;
+ int virq = NO_IRQ;
+
+ cause = in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_SELECT_CAUSE);
+ if (cause & MV64X60_SELECT_CAUSE_HIGH) {
+ cause &= mv64x60_cached_high_mask;
+ level1 = MV64x60_LEVEL1_HIGH;
+ if (cause & MV64X60_HIGH_GPP_GROUPS) {
+ cause = in_le32(mv64x60_gpp_reg_base +
+ MV64x60_GPP_INTR_CAUSE);
+ cause &= mv64x60_cached_gpp_mask;
+ level1 = MV64x60_LEVEL1_GPP;
+ }
+ } else {
+ cause &= mv64x60_cached_low_mask;
+ level1 = MV64x60_LEVEL1_LOW;
+ }
+ if (cause) {
+ hwirq = (level1 << MV64x60_LEVEL1_OFFSET) | __ilog2(cause);
+ virq = irq_linear_revmap(mv64x60_irq_host, hwirq);
+ }
+
+ return virq;
+}
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 7f4c075..90f8740 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -244,7 +244,7 @@
static int qe_sdma_init(void)
{
struct sdma *sdma = &qe_immr->sdma;
- u32 sdma_buf_offset;
+ unsigned long sdma_buf_offset;
if (!sdma)
return -ENODEV;
@@ -252,10 +252,10 @@
/* allocate 2 internal temporary buffers (512 bytes size each) for
* the SDMA */
sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
- if (IS_MURAM_ERR(sdma_buf_offset))
+ if (IS_ERR_VALUE(sdma_buf_offset))
return -ENOMEM;
- out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
+ out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
(0x1 << QE_SDMR_CEN_SHIFT)));
@@ -291,33 +291,32 @@
if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
address = *of_get_address(np, 0, &size, &flags);
of_node_put(np);
- rh_attach_region(&qe_muram_info,
- (void *)address, (int)size);
+ rh_attach_region(&qe_muram_info, address, (int) size);
}
}
/* This function returns an index into the MURAM area.
*/
-u32 qe_muram_alloc(u32 size, u32 align)
+unsigned long qe_muram_alloc(int size, int align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&qe_muram_lock, flags);
start = rh_alloc_align(&qe_muram_info, size, align, "QE");
spin_unlock_irqrestore(&qe_muram_lock, flags);
- return (u32) start;
+ return start;
}
EXPORT_SYMBOL(qe_muram_alloc);
-int qe_muram_free(u32 offset)
+int qe_muram_free(unsigned long offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&qe_muram_lock, flags);
- ret = rh_free(&qe_muram_info, (void *)offset);
+ ret = rh_free(&qe_muram_info, offset);
spin_unlock_irqrestore(&qe_muram_lock, flags);
return ret;
@@ -325,16 +324,16 @@
EXPORT_SYMBOL(qe_muram_free);
/* not sure if this is ever needed */
-u32 qe_muram_alloc_fixed(u32 offset, u32 size)
+unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&qe_muram_lock, flags);
- start = rh_alloc_fixed(&qe_muram_info, (void *)offset, size, "commproc");
+ start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
spin_unlock_irqrestore(&qe_muram_lock, flags);
- return (u32) start;
+ return start;
}
EXPORT_SYMBOL(qe_muram_alloc_fixed);
@@ -344,7 +343,7 @@
}
EXPORT_SYMBOL(qe_muram_dump);
-void *qe_muram_addr(u32 offset)
+void *qe_muram_addr(unsigned long offset)
{
return (void *)&qe_immr->muram[offset];
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 66137bf..9143236 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
+#include <linux/err.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
@@ -268,7 +269,7 @@
/* Allocate memory for Tx Virtual Fifo */
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
@@ -280,7 +281,7 @@
qe_muram_alloc(uf_info->urfs +
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index b930d68..1f65c26 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
+#include <linux/err.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
@@ -175,7 +176,7 @@
/* Get PRAM base */
uccs->us_pram_offset =
qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
- if (IS_MURAM_ERR(uccs->us_pram_offset)) {
+ if (IS_ERR_VALUE(uccs->us_pram_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
ucc_slow_free(uccs);
return -ENOMEM;
@@ -210,7 +211,7 @@
uccs->rx_base_offset =
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
- if (IS_MURAM_ERR(uccs->rx_base_offset)) {
+ if (IS_ERR_VALUE(uccs->rx_base_offset)) {
printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
@@ -220,7 +221,7 @@
uccs->tx_base_offset =
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
- if (IS_MURAM_ERR(uccs->tx_base_offset)) {
+ if (IS_ERR_VALUE(uccs->tx_base_offset)) {
printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
index e354839..efa0a56 100644
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ b/arch/ppc/4xx_io/serial_sicc.c
@@ -3,7 +3,7 @@
*
* Based on drivers/char/serial_amba.c, by ARM Ltd.
*
- * Copyright 2001 IBM Crop.
+ * Copyright 2001 IBM Corp.
* Author: IBM China Research Lab
* Yudong Yang <yangyud@cn.ibm.com>
* Yi Ge <geyi@cn.ibm.com>
@@ -155,16 +155,16 @@
/* serial port transmit command register */
-#define _TxCR_ET_MASK 0x80 /* transmiter enable mask */
+#define _TxCR_ET_MASK 0x80 /* transmitter enable mask */
#define _TxCR_DME_MASK 0x60 /* dma mode mask */
#define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */
#define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */
#define _TxCR_SPE_MASK 0x04 /* stop/pause mask */
#define _TxCR_TB_MASK 0x02 /* transmit break mask */
-#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmiter enabled */
-#define _TxCR_DME_DISABLE 0x00 /* transmiter disabled, TBR intr disabled */
-#define _TxCR_DME_TBR 0x20 /* transmiter disabled, TBR intr enabled */
+#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmitter enabled */
+#define _TxCR_DME_DISABLE 0x00 /* transmitter disabled, TBR intr disabled */
+#define _TxCR_DME_TBR 0x20 /* transmitter disabled, TBR intr enabled */
#define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */
#define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 7a8722b..7088428 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -144,7 +144,7 @@
/* Set SDMA Bus Request priority 5.
* On 860T, this also enables FEC priority 6. I am not sure
- * this is what we realy want for some applications, but the
+ * this is what we really want for some applications, but the
* manual recommends it.
* Bit 25, FAM can also be set to use FEC aggressive mode (860T).
*/
@@ -402,7 +402,7 @@
* with the processor and the microcode patches applied / activated.
* But the following should be at least safe.
*/
- rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+ rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
}
/*
@@ -410,9 +410,9 @@
* This function returns an offset into the DPRAM area.
* Use cpm_dpram_addr() to get the virtual address of the area.
*/
-uint cpm_dpalloc(uint size, uint align)
+unsigned long cpm_dpalloc(uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
@@ -420,34 +420,34 @@
start = rh_alloc(&cpm_dpmem_info, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
- return (uint)start;
+ return start;
}
EXPORT_SYMBOL(cpm_dpalloc);
-int cpm_dpfree(uint offset)
+int cpm_dpfree(unsigned long offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ ret = rh_free(&cpm_dpmem_info, offset);
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return ret;
}
EXPORT_SYMBOL(cpm_dpfree);
-uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
- return (uint)start;
+ return start;
}
EXPORT_SYMBOL(cpm_dpalloc_fixed);
@@ -457,7 +457,7 @@
}
EXPORT_SYMBOL(cpm_dpdump);
-void *cpm_dpram_addr(uint offset)
+void *cpm_dpram_addr(unsigned long offset)
{
return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
}
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index 57a9a61..d38335d 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -1878,7 +1878,7 @@
bdp--;
bdp->cbd_sc |= BD_SC_WRAP;
- /* ...and the same for transmmit.
+ /* ...and the same for transmit.
*/
bdp = fep->tx_bd_base;
for (i=0; i<TX_RING_SIZE; i++) {
diff --git a/arch/ppc/boot/lib/vreset.c b/arch/ppc/boot/lib/vreset.c
index 463ba00..98539e9 100644
--- a/arch/ppc/boot/lib/vreset.c
+++ b/arch/ppc/boot/lib/vreset.c
@@ -518,7 +518,7 @@
outb(0x3c6, 0xff); /* MASK */
for ( i = 0; i < 0x10; i++)
- writeAttr(i, AC[i], 0); /* pallete */
+ writeAttr(i, AC[i], 0); /* palette */
writeAttr(0x10, 0x0c, 0); /* text mode */
writeAttr(0x11, 0x00, 0); /* overscan color (border) */
writeAttr(0x12, 0x0f, 0); /* plane enable */
diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c
index cacc40f..ea615d8 100644
--- a/arch/ppc/boot/simple/m8xx_tty.c
+++ b/arch/ppc/boot/simple/m8xx_tty.c
@@ -1,7 +1,7 @@
/* Minimal serial functions needed to send messages out the serial
* port on the MBX console.
*
- * The MBX uxes SMC1 for the serial port. We reset the port and use
+ * The MBX uses SMC1 for the serial port. We reset the port and use
* only the first BD that EPPC-Bug set up as a character FIFO.
*
* Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug
diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c
index 10219ee..8a08ad3 100644
--- a/arch/ppc/boot/simple/misc-embedded.c
+++ b/arch/ppc/boot/simple/misc-embedded.c
@@ -136,7 +136,7 @@
/*
* We link ourself to an arbitrary low address. When we run, we
- * relocate outself to that address. __image_being points to
+ * relocate ourself to that address. __image_being points to
* the part of the image where the zImage is. -- Tom
*/
zimage_start = (char *)(unsigned long)(&__image_begin);
diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c
index 7b5924cc..6955891 100644
--- a/arch/ppc/boot/simple/mpc52xx_tty.c
+++ b/arch/ppc/boot/simple/mpc52xx_tty.c
@@ -33,7 +33,7 @@
* rtc. We read the decrementer change during one rtc tick
* and multiply by 4 to get the system bus clock frequency. Since a
* rtc tick is one seconds, and that's pretty long, we change the rtc
- * dividers temporarly to set them 64x faster ;)
+ * dividers temporarily to set them 64x faster ;)
*/
static int
mpc52xx_ipbfreq(void)
diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c
index 781e040..8a73578 100644
--- a/arch/ppc/boot/simple/mv64x60_tty.c
+++ b/arch/ppc/boot/simple/mv64x60_tty.c
@@ -338,7 +338,7 @@
rdp = &rd[com_port][cur_rd[com_port]];
- /* Go thru rcv desc's until empty looking for one with data (no error)*/
+ /* Go through rcv descs until empty looking for one with data (no error)*/
while (((rdp->cmd_stat & SDMA_DESC_CMDSTAT_O) == 0) &&
(loop_count++ < RX_NUM_DESC)) {
diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h
index fd98ee0..9afa5ab 100644
--- a/arch/ppc/boot/simple/rw4/stb.h
+++ b/arch/ppc/boot/simple/rw4/stb.h
@@ -88,7 +88,7 @@
/*----------------------------------------------------------------------------+
| STB tasks, task stack sizes, and task priorities. The actual task priority
| is 1 more than the specified number since priority 0 is reserved (system
-| internaly adds 1 to supplied priority number).
+| internally adds 1 to supplied priority number).
+----------------------------------------------------------------------------*/
#define STB_IDLE_TASK_SS (5* 1024)
#define STB_IDLE_TASK_PRIO 0
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index 810f7aa..aea100b 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -577,7 +577,7 @@
* ESR_DST (!?) or 0. In the process of chasing this with the
* hardware people - not sure if it can happen on any illegal
* instruction or only on FP instructions, whether there is a
- * pattern to occurences etc. -dgibson 31/Mar/2003 */
+ * pattern to occurrences etc. -dgibson 31/Mar/2003 */
if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
emulate_single_step(regs);
return;
@@ -860,7 +860,7 @@
spefscr = current->thread.spefscr;
fpexc_mode = current->thread.fpexc_mode;
- /* Hardware does not neccessarily set sticky
+ /* Hardware does not necessarily set sticky
* underflow/overflow/invalid flags */
if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
code = FPE_FLTOVF;
diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile
index 422bef9..095e661 100644
--- a/arch/ppc/lib/Makefile
+++ b/arch/ppc/lib/Makefile
@@ -3,6 +3,3 @@
#
obj-y := checksum.o string.o div64.o
-
-obj-$(CONFIG_8xx) += rheap.o
-obj-$(CONFIG_CPM2) += rheap.o
diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c
deleted file mode 100644
index d407007..0000000
--- a/arch/ppc/lib/rheap.c
+++ /dev/null
@@ -1,692 +0,0 @@
-/*
- * A Remote Heap. Remote means that we don't touch the memory that the
- * heap points to. Normal heap implementations use the memory they manage
- * to place their list. We cannot do that because the memory we manage may
- * have special properties, for example it is uncachable or of different
- * endianess.
- *
- * Author: Pantelis Antoniou <panto@intracom.gr>
- *
- * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/rheap.h>
-
-/*
- * Fixup a list_head, needed when copying lists. If the pointers fall
- * between s and e, apply the delta. This assumes that
- * sizeof(struct list_head *) == sizeof(unsigned long *).
- */
-static inline void fixup(unsigned long s, unsigned long e, int d,
- struct list_head *l)
-{
- unsigned long *pp;
-
- pp = (unsigned long *)&l->next;
- if (*pp >= s && *pp < e)
- *pp += d;
-
- pp = (unsigned long *)&l->prev;
- if (*pp >= s && *pp < e)
- *pp += d;
-}
-
-/* Grow the allocated blocks */
-static int grow(rh_info_t * info, int max_blocks)
-{
- rh_block_t *block, *blk;
- int i, new_blocks;
- int delta;
- unsigned long blks, blke;
-
- if (max_blocks <= info->max_blocks)
- return -EINVAL;
-
- new_blocks = max_blocks - info->max_blocks;
-
- block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
- if (block == NULL)
- return -ENOMEM;
-
- if (info->max_blocks > 0) {
-
- /* copy old block area */
- memcpy(block, info->block,
- sizeof(rh_block_t) * info->max_blocks);
-
- delta = (char *)block - (char *)info->block;
-
- /* and fixup list pointers */
- blks = (unsigned long)info->block;
- blke = (unsigned long)(info->block + info->max_blocks);
-
- for (i = 0, blk = block; i < info->max_blocks; i++, blk++)
- fixup(blks, blke, delta, &blk->list);
-
- fixup(blks, blke, delta, &info->empty_list);
- fixup(blks, blke, delta, &info->free_list);
- fixup(blks, blke, delta, &info->taken_list);
-
- /* free the old allocated memory */
- if ((info->flags & RHIF_STATIC_BLOCK) == 0)
- kfree(info->block);
- }
-
- info->block = block;
- info->empty_slots += new_blocks;
- info->max_blocks = max_blocks;
- info->flags &= ~RHIF_STATIC_BLOCK;
-
- /* add all new blocks to the free list */
- for (i = 0, blk = block + info->max_blocks; i < new_blocks; i++, blk++)
- list_add(&blk->list, &info->empty_list);
-
- return 0;
-}
-
-/*
- * Assure at least the required amount of empty slots. If this function
- * causes a grow in the block area then all pointers kept to the block
- * area are invalid!
- */
-static int assure_empty(rh_info_t * info, int slots)
-{
- int max_blocks;
-
- /* This function is not meant to be used to grow uncontrollably */
- if (slots >= 4)
- return -EINVAL;
-
- /* Enough space */
- if (info->empty_slots >= slots)
- return 0;
-
- /* Next 16 sized block */
- max_blocks = ((info->max_blocks + slots) + 15) & ~15;
-
- return grow(info, max_blocks);
-}
-
-static rh_block_t *get_slot(rh_info_t * info)
-{
- rh_block_t *blk;
-
- /* If no more free slots, and failure to extend. */
- /* XXX: You should have called assure_empty before */
- if (info->empty_slots == 0) {
- printk(KERN_ERR "rh: out of slots; crash is imminent.\n");
- return NULL;
- }
-
- /* Get empty slot to use */
- blk = list_entry(info->empty_list.next, rh_block_t, list);
- list_del_init(&blk->list);
- info->empty_slots--;
-
- /* Initialize */
- blk->start = NULL;
- blk->size = 0;
- blk->owner = NULL;
-
- return blk;
-}
-
-static inline void release_slot(rh_info_t * info, rh_block_t * blk)
-{
- list_add(&blk->list, &info->empty_list);
- info->empty_slots++;
-}
-
-static void attach_free_block(rh_info_t * info, rh_block_t * blkn)
-{
- rh_block_t *blk;
- rh_block_t *before;
- rh_block_t *after;
- rh_block_t *next;
- int size;
- unsigned long s, e, bs, be;
- struct list_head *l;
-
- /* We assume that they are aligned properly */
- size = blkn->size;
- s = (unsigned long)blkn->start;
- e = s + size;
-
- /* Find the blocks immediately before and after the given one
- * (if any) */
- before = NULL;
- after = NULL;
- next = NULL;
-
- list_for_each(l, &info->free_list) {
- blk = list_entry(l, rh_block_t, list);
-
- bs = (unsigned long)blk->start;
- be = bs + blk->size;
-
- if (next == NULL && s >= bs)
- next = blk;
-
- if (be == s)
- before = blk;
-
- if (e == bs)
- after = blk;
-
- /* If both are not null, break now */
- if (before != NULL && after != NULL)
- break;
- }
-
- /* Now check if they are really adjacent */
- if (before != NULL && s != (unsigned long)before->start + before->size)
- before = NULL;
-
- if (after != NULL && e != (unsigned long)after->start)
- after = NULL;
-
- /* No coalescing; list insert and return */
- if (before == NULL && after == NULL) {
-
- if (next != NULL)
- list_add(&blkn->list, &next->list);
- else
- list_add(&blkn->list, &info->free_list);
-
- return;
- }
-
- /* We don't need it anymore */
- release_slot(info, blkn);
-
- /* Grow the before block */
- if (before != NULL && after == NULL) {
- before->size += size;
- return;
- }
-
- /* Grow the after block backwards */
- if (before == NULL && after != NULL) {
- after->start = (int8_t *)after->start - size;
- after->size += size;
- return;
- }
-
- /* Grow the before block, and release the after block */
- before->size += size + after->size;
- list_del(&after->list);
- release_slot(info, after);
-}
-
-static void attach_taken_block(rh_info_t * info, rh_block_t * blkn)
-{
- rh_block_t *blk;
- struct list_head *l;
-
- /* Find the block immediately before the given one (if any) */
- list_for_each(l, &info->taken_list) {
- blk = list_entry(l, rh_block_t, list);
- if (blk->start > blkn->start) {
- list_add_tail(&blkn->list, &blk->list);
- return;
- }
- }
-
- list_add_tail(&blkn->list, &info->taken_list);
-}
-
-/*
- * Create a remote heap dynamically. Note that no memory for the blocks
- * are allocated. It will upon the first allocation
- */
-rh_info_t *rh_create(unsigned int alignment)
-{
- rh_info_t *info;
-
- /* Alignment must be a power of two */
- if ((alignment & (alignment - 1)) != 0)
- return ERR_PTR(-EINVAL);
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (info == NULL)
- return ERR_PTR(-ENOMEM);
-
- info->alignment = alignment;
-
- /* Initially everything as empty */
- info->block = NULL;
- info->max_blocks = 0;
- info->empty_slots = 0;
- info->flags = 0;
-
- INIT_LIST_HEAD(&info->empty_list);
- INIT_LIST_HEAD(&info->free_list);
- INIT_LIST_HEAD(&info->taken_list);
-
- return info;
-}
-
-/*
- * Destroy a dynamically created remote heap. Deallocate only if the areas
- * are not static
- */
-void rh_destroy(rh_info_t * info)
-{
- if ((info->flags & RHIF_STATIC_BLOCK) == 0 && info->block != NULL)
- kfree(info->block);
-
- if ((info->flags & RHIF_STATIC_INFO) == 0)
- kfree(info);
-}
-
-/*
- * Initialize in place a remote heap info block. This is needed to support
- * operation very early in the startup of the kernel, when it is not yet safe
- * to call kmalloc.
- */
-void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
- rh_block_t * block)
-{
- int i;
- rh_block_t *blk;
-
- /* Alignment must be a power of two */
- if ((alignment & (alignment - 1)) != 0)
- return;
-
- info->alignment = alignment;
-
- /* Initially everything as empty */
- info->block = block;
- info->max_blocks = max_blocks;
- info->empty_slots = max_blocks;
- info->flags = RHIF_STATIC_INFO | RHIF_STATIC_BLOCK;
-
- INIT_LIST_HEAD(&info->empty_list);
- INIT_LIST_HEAD(&info->free_list);
- INIT_LIST_HEAD(&info->taken_list);
-
- /* Add all new blocks to the free list */
- for (i = 0, blk = block; i < max_blocks; i++, blk++)
- list_add(&blk->list, &info->empty_list);
-}
-
-/* Attach a free memory region, coalesces regions if adjuscent */
-int rh_attach_region(rh_info_t * info, void *start, int size)
-{
- rh_block_t *blk;
- unsigned long s, e, m;
- int r;
-
- /* The region must be aligned */
- s = (unsigned long)start;
- e = s + size;
- m = info->alignment - 1;
-
- /* Round start up */
- s = (s + m) & ~m;
-
- /* Round end down */
- e = e & ~m;
-
- /* Take final values */
- start = (void *)s;
- size = (int)(e - s);
-
- /* Grow the blocks, if needed */
- r = assure_empty(info, 1);
- if (r < 0)
- return r;
-
- blk = get_slot(info);
- blk->start = start;
- blk->size = size;
- blk->owner = NULL;
-
- attach_free_block(info, blk);
-
- return 0;
-}
-
-/* Detatch given address range, splits free block if needed. */
-void *rh_detach_region(rh_info_t * info, void *start, int size)
-{
- struct list_head *l;
- rh_block_t *blk, *newblk;
- unsigned long s, e, m, bs, be;
-
- /* Validate size */
- if (size <= 0)
- return ERR_PTR(-EINVAL);
-
- /* The region must be aligned */
- s = (unsigned long)start;
- e = s + size;
- m = info->alignment - 1;
-
- /* Round start up */
- s = (s + m) & ~m;
-
- /* Round end down */
- e = e & ~m;
-
- if (assure_empty(info, 1) < 0)
- return ERR_PTR(-ENOMEM);
-
- blk = NULL;
- list_for_each(l, &info->free_list) {
- blk = list_entry(l, rh_block_t, list);
- /* The range must lie entirely inside one free block */
- bs = (unsigned long)blk->start;
- be = (unsigned long)blk->start + blk->size;
- if (s >= bs && e <= be)
- break;
- blk = NULL;
- }
-
- if (blk == NULL)
- return ERR_PTR(-ENOMEM);
-
- /* Perfect fit */
- if (bs == s && be == e) {
- /* Delete from free list, release slot */
- list_del(&blk->list);
- release_slot(info, blk);
- return (void *)s;
- }
-
- /* blk still in free list, with updated start and/or size */
- if (bs == s || be == e) {
- if (bs == s)
- blk->start = (int8_t *)blk->start + size;
- blk->size -= size;
-
- } else {
- /* The front free fragment */
- blk->size = s - bs;
-
- /* the back free fragment */
- newblk = get_slot(info);
- newblk->start = (void *)e;
- newblk->size = be - e;
-
- list_add(&newblk->list, &blk->list);
- }
-
- return (void *)s;
-}
-
-void *rh_alloc(rh_info_t * info, int size, const char *owner)
-{
- struct list_head *l;
- rh_block_t *blk;
- rh_block_t *newblk;
- void *start;
-
- /* Validate size */
- if (size <= 0)
- return ERR_PTR(-EINVAL);
-
- /* Align to configured alignment */
- size = (size + (info->alignment - 1)) & ~(info->alignment - 1);
-
- if (assure_empty(info, 1) < 0)
- return ERR_PTR(-ENOMEM);
-
- blk = NULL;
- list_for_each(l, &info->free_list) {
- blk = list_entry(l, rh_block_t, list);
- if (size <= blk->size)
- break;
- blk = NULL;
- }
-
- if (blk == NULL)
- return ERR_PTR(-ENOMEM);
-
- /* Just fits */
- if (blk->size == size) {
- /* Move from free list to taken list */
- list_del(&blk->list);
- blk->owner = owner;
- start = blk->start;
-
- attach_taken_block(info, blk);
-
- return start;
- }
-
- newblk = get_slot(info);
- newblk->start = blk->start;
- newblk->size = size;
- newblk->owner = owner;
-
- /* blk still in free list, with updated start, size */
- blk->start = (int8_t *)blk->start + size;
- blk->size -= size;
-
- start = newblk->start;
-
- attach_taken_block(info, newblk);
-
- return start;
-}
-
-/* allocate at precisely the given address */
-void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner)
-{
- struct list_head *l;
- rh_block_t *blk, *newblk1, *newblk2;
- unsigned long s, e, m, bs, be;
-
- /* Validate size */
- if (size <= 0)
- return ERR_PTR(-EINVAL);
-
- /* The region must be aligned */
- s = (unsigned long)start;
- e = s + size;
- m = info->alignment - 1;
-
- /* Round start up */
- s = (s + m) & ~m;
-
- /* Round end down */
- e = e & ~m;
-
- if (assure_empty(info, 2) < 0)
- return ERR_PTR(-ENOMEM);
-
- blk = NULL;
- list_for_each(l, &info->free_list) {
- blk = list_entry(l, rh_block_t, list);
- /* The range must lie entirely inside one free block */
- bs = (unsigned long)blk->start;
- be = (unsigned long)blk->start + blk->size;
- if (s >= bs && e <= be)
- break;
- }
-
- if (blk == NULL)
- return ERR_PTR(-ENOMEM);
-
- /* Perfect fit */
- if (bs == s && be == e) {
- /* Move from free list to taken list */
- list_del(&blk->list);
- blk->owner = owner;
-
- start = blk->start;
- attach_taken_block(info, blk);
-
- return start;
-
- }
-
- /* blk still in free list, with updated start and/or size */
- if (bs == s || be == e) {
- if (bs == s)
- blk->start = (int8_t *)blk->start + size;
- blk->size -= size;
-
- } else {
- /* The front free fragment */
- blk->size = s - bs;
-
- /* The back free fragment */
- newblk2 = get_slot(info);
- newblk2->start = (void *)e;
- newblk2->size = be - e;
-
- list_add(&newblk2->list, &blk->list);
- }
-
- newblk1 = get_slot(info);
- newblk1->start = (void *)s;
- newblk1->size = e - s;
- newblk1->owner = owner;
-
- start = newblk1->start;
- attach_taken_block(info, newblk1);
-
- return start;
-}
-
-int rh_free(rh_info_t * info, void *start)
-{
- rh_block_t *blk, *blk2;
- struct list_head *l;
- int size;
-
- /* Linear search for block */
- blk = NULL;
- list_for_each(l, &info->taken_list) {
- blk2 = list_entry(l, rh_block_t, list);
- if (start < blk2->start)
- break;
- blk = blk2;
- }
-
- if (blk == NULL || start > (blk->start + blk->size))
- return -EINVAL;
-
- /* Remove from taken list */
- list_del(&blk->list);
-
- /* Get size of freed block */
- size = blk->size;
- attach_free_block(info, blk);
-
- return size;
-}
-
-int rh_get_stats(rh_info_t * info, int what, int max_stats, rh_stats_t * stats)
-{
- rh_block_t *blk;
- struct list_head *l;
- struct list_head *h;
- int nr;
-
- switch (what) {
-
- case RHGS_FREE:
- h = &info->free_list;
- break;
-
- case RHGS_TAKEN:
- h = &info->taken_list;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Linear search for block */
- nr = 0;
- list_for_each(l, h) {
- blk = list_entry(l, rh_block_t, list);
- if (stats != NULL && nr < max_stats) {
- stats->start = blk->start;
- stats->size = blk->size;
- stats->owner = blk->owner;
- stats++;
- }
- nr++;
- }
-
- return nr;
-}
-
-int rh_set_owner(rh_info_t * info, void *start, const char *owner)
-{
- rh_block_t *blk, *blk2;
- struct list_head *l;
- int size;
-
- /* Linear search for block */
- blk = NULL;
- list_for_each(l, &info->taken_list) {
- blk2 = list_entry(l, rh_block_t, list);
- if (start < blk2->start)
- break;
- blk = blk2;
- }
-
- if (blk == NULL || start > (blk->start + blk->size))
- return -EINVAL;
-
- blk->owner = owner;
- size = blk->size;
-
- return size;
-}
-
-void rh_dump(rh_info_t * info)
-{
- static rh_stats_t st[32]; /* XXX maximum 32 blocks */
- int maxnr;
- int i, nr;
-
- maxnr = ARRAY_SIZE(st);
-
- printk(KERN_INFO
- "info @0x%p (%d slots empty / %d max)\n",
- info, info->empty_slots, info->max_blocks);
-
- printk(KERN_INFO " Free:\n");
- nr = rh_get_stats(info, RHGS_FREE, maxnr, st);
- if (nr > maxnr)
- nr = maxnr;
- for (i = 0; i < nr; i++)
- printk(KERN_INFO
- " 0x%p-0x%p (%u)\n",
- st[i].start, (int8_t *) st[i].start + st[i].size,
- st[i].size);
- printk(KERN_INFO "\n");
-
- printk(KERN_INFO " Taken:\n");
- nr = rh_get_stats(info, RHGS_TAKEN, maxnr, st);
- if (nr > maxnr)
- nr = maxnr;
- for (i = 0; i < nr; i++)
- printk(KERN_INFO
- " 0x%p-0x%p (%u) %s\n",
- st[i].start, (int8_t *) st[i].start + st[i].size,
- st[i].size, st[i].owner != NULL ? st[i].owner : "");
- printk(KERN_INFO "\n");
-}
-
-void rh_dump_blk(rh_info_t * info, rh_block_t * blk)
-{
- printk(KERN_INFO
- "blk @0x%p: 0x%p-0x%p (%u)\n",
- blk, blk->start, (int8_t *) blk->start + blk->size, blk->size);
-}
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index c374e53..390dd19 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -48,7 +48,7 @@
#include "mmu_decl.h"
#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
#endif
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
index 75857b3..1a7f075 100644
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -197,7 +197,7 @@
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
- /* end work arround */
+ /* end workaround */
#ifdef DEBUG
printk("PCI bridge regs after fixup \n");
diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c
index e5adf9b..5aa2950 100644
--- a/arch/ppc/platforms/4xx/ep405.c
+++ b/arch/ppc/platforms/4xx/ep405.c
@@ -130,7 +130,7 @@
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
- /* end work arround */
+ /* end workaround */
#endif
}
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h
index 4aa8821..08a6a77 100644
--- a/arch/ppc/platforms/4xx/ibmnp405h.h
+++ b/arch/ppc/platforms/4xx/ibmnp405h.h
@@ -80,7 +80,7 @@
#define DCRN_CPMFR_BASE 0x0B9
#define DCRN_CPMER_BASE 0x0B8
-/* CPM Clocking & Power Mangement defines */
+/* CPM Clocking & Power Management defines */
#define IBM_CPM_PCI 0x40000000 /* PCI */
#define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */
#define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
index c47493e..8689f3e 100644
--- a/arch/ppc/platforms/4xx/sycamore.c
+++ b/arch/ppc/platforms/4xx/sycamore.c
@@ -225,7 +225,7 @@
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
- /* end work arround */
+ /* end workaround */
#ifdef DEBUG
printk("PCI bridge regs after fixup \n");
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
index f414d2d..2f97723 100644
--- a/arch/ppc/platforms/4xx/walnut.c
+++ b/arch/ppc/platforms/4xx/walnut.c
@@ -200,7 +200,7 @@
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
- /* end work arround */
+ /* end work around */
#ifdef DEBUG
printk("PCI bridge regs after fixup \n");
diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c
index f87e06f..f8baf05 100644
--- a/arch/ppc/platforms/ev64360.c
+++ b/arch/ppc/platforms/ev64360.c
@@ -473,7 +473,7 @@
* are non-zero, then we should use the board info from the bd_t
* structure and the cmdline pointed to by r6 instead of the
* information from birecs, if any. Otherwise, use the information
- * from birecs as discovered by the preceeding call to
+ * from birecs as discovered by the preceding call to
* parse_bootinfo(). This rule should work with both PPCBoot, which
* uses a bd_t board info structure, and the kernel boot wrapper,
* which uses birecs.
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index d809e17..ca5de13 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -144,7 +144,7 @@
/* Enable pipelining */
mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1 << 13));
- /* Enable Snoop Pipelineing */
+ /* Enable Snoop Pipelining */
mv64x60_set_bits(&bh, MV64360_D_UNIT_CONTROL_HIGH, (1 << 24));
/*
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
index 720f8b3..c289e9f 100644
--- a/arch/ppc/platforms/katana.c
+++ b/arch/ppc/platforms/katana.c
@@ -880,7 +880,7 @@
* are non-zero, then we should use the board info from the bd_t
* structure and the cmdline pointed to by r6 instead of the
* information from birecs, if any. Otherwise, use the information
- * from birecs as discovered by the preceeding call to
+ * from birecs as discovered by the preceding call to
* parse_bootinfo(). This rule should work with both PPCBoot, which
* uses a bd_t board info structure, and the kernel boot wrapper,
* which uses birecs.
diff --git a/arch/ppc/platforms/mbx.h b/arch/ppc/platforms/mbx.h
index fe81ca4..1cf36fa 100644
--- a/arch/ppc/platforms/mbx.h
+++ b/arch/ppc/platforms/mbx.h
@@ -37,7 +37,7 @@
/* Memory map for the MBX as configured by EPPC-Bug. We could reprogram
* The SIU and PCI bridge, and try to use larger MMU pages, but the
- * performance gain is not measureable and it certainly complicates the
+ * performance gain is not measurable and it certainly complicates the
* generic MMU model.
*
* In a effort to minimize memory usage for embedded applications, any
diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h
index 9e2a09e..fbb5495 100644
--- a/arch/ppc/platforms/mvme5100.h
+++ b/arch/ppc/platforms/mvme5100.h
@@ -69,7 +69,7 @@
#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-/* All UART IRQ's are wire-OR'd to one MPIC IRQ */
+/* All UART IRQs are wire-OR'd to one MPIC IRQ */
#define STD_SERIAL_PORT_DFNS \
{ 0, BASE_BAUD, MVME5100_SERIAL_1, \
MVME5100_SERIAL_IRQ, \
diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h
index a07cbbd..a4bbaa8 100644
--- a/arch/ppc/platforms/pplus.h
+++ b/arch/ppc/platforms/pplus.h
@@ -18,7 +18,7 @@
#include <asm/io.h>
/*
- * Due to limiations imposed by legacy hardware (primaryily IDE controllers),
+ * Due to limitations imposed by legacy hardware (primarily IDE controllers),
* the PPLUS boards operate using a PReP address map.
*
* From Processor (physical) -> PCI:
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c
index c627ba4..1df3150 100644
--- a/arch/ppc/platforms/prep_pci.c
+++ b/arch/ppc/platforms/prep_pci.c
@@ -589,9 +589,9 @@
{ 4, 1, 2, 3}, /* Buses 3, 7, 11 ... */
};
-/* We have to turn on LEVEL mode for changed IRQ's */
-/* All PCI IRQ's need to be level mode, so this should be something
- * other than hard-coded as well... IRQ's are individually mappable
+/* We have to turn on LEVEL mode for changed IRQs */
+/* All PCI IRQs need to be level mode, so this should be something
+ * other than hard-coded as well... IRQs are individually mappable
* to either edge or level.
*/
@@ -923,8 +923,8 @@
Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)";
Motherboard_map = ibm6015_pci_IRQ_map;
Motherboard_routes = ibm6015_pci_IRQ_routes;
- *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */
- *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */
+ *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
+ *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
}
void __init
@@ -933,8 +933,8 @@
Motherboard_map_name = "IBM Thinkpad 850/860";
Motherboard_map = Nobis_pci_IRQ_map;
Motherboard_routes = Nobis_pci_IRQ_routes;
- *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */
- *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */
+ *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
+ *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
}
void __init
@@ -943,8 +943,8 @@
Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)";
Motherboard_map = ibm8xx_pci_IRQ_map;
Motherboard_routes = ibm8xx_pci_IRQ_routes;
- *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */
- *irq_edge_mask_hi = 0xA4; /* irq's 10, 13, 15 level-triggered */
+ *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
+ *irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */
}
void __init
@@ -954,8 +954,8 @@
Motherboard_map = ibm43p_pci_IRQ_map;
Motherboard_routes = ibm43p_pci_IRQ_routes;
Motherboard_non0 = ibm43p_pci_map_non0;
- *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */
- *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */
+ *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
+ *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
}
void __init
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index f166299..6f21110 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -593,7 +593,7 @@
PPC_DEVICE *audiodevice = NULL;
/*
- * Get the needed resource informations from residual data.
+ * Get the needed resource information from residual data.
*
*/
if (have_residual_data)
@@ -632,9 +632,9 @@
}
/*
- * Find a way to push these informations to the cs4232 driver
+ * Find a way to push this information to the cs4232 driver
* Give it out with printk, when not in cmd_line?
- * Append it to cmd_line and boot_command_line?
+ * Append it to cmd_line and boot_command_line?
* Format is cs4232=io,irq,dma,dma2
*/
}
diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h
index 4c7adcc..c4dcff0 100644
--- a/arch/ppc/platforms/prpmc750.h
+++ b/arch/ppc/platforms/prpmc750.h
@@ -16,7 +16,7 @@
#define __ASM_PRPMC750_H__
/*
- * Due to limiations imposed by legacy hardware (primaryily IDE controllers),
+ * Due to limitations imposed by legacy hardware (primarily IDE controllers),
* the PrPMC750 carrier board operates using a PReP address map.
*
* From Processor (physical) -> PCI:
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 13d70ab..b558607 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -1371,7 +1371,7 @@
* are non-zero, then we should use the board info from the bd_t
* structure and the cmdline pointed to by r6 instead of the
* information from birecs, if any. Otherwise, use the information
- * from birecs as discovered by the preceeding call to
+ * from birecs as discovered by the preceding call to
* parse_bootinfo(). This rule should work with both PPCBoot, which
* uses a bd_t board info structure, and the kernel boot wrapper,
* which uses birecs.
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
index a76002a..3352fae 100644
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -54,7 +54,7 @@
*
*
* Motorola has finally released a version of DINK32 that correctly
- * (seemingly) initalizes the memory controller correctly, regardless
+ * (seemingly) initializes the memory controller correctly, regardless
* of the amount of memory in the system. Once a method of determining
* what version of DINK initializes the system for us, if applicable, is
* found, we can hopefully stop hardcoding 32MB of RAM.
@@ -473,7 +473,7 @@
arch_initcall(sandpoint_request_io);
/*
- * Interrupt setup and service. Interrrupts on the Sandpoint come
+ * Interrupt setup and service. Interrupts on the Sandpoint come
* from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
* The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
* IDE is on EPIC 7 and 8.
@@ -505,7 +505,7 @@
if (bp->bi_memsize)
return bp->bi_memsize;
- /* DINK32 13.0 correctly initalizes things, so iff you use
+ /* DINK32 13.0 correctly initializes things, so iff you use
* this you _should_ be able to change this instead of a
* hardcoded value. */
#if 0
@@ -677,7 +677,7 @@
* are non-zero, then we should use the board info from the bd_t
* structure and the cmdline pointed to by r6 instead of the
* information from birecs, if any. Otherwise, use the information
- * from birecs as discovered by the preceeding call to
+ * from birecs as discovered by the preceding call to
* parse_bootinfo(). This rule should work with both PPCBoot, which
* uses a bd_t board info structure, and the kernel boot wrapper,
* which uses birecs.
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
index cbac44b..6cd859d 100644
--- a/arch/ppc/syslib/cpm2_common.c
+++ b/arch/ppc/syslib/cpm2_common.c
@@ -136,15 +136,14 @@
* varies with the processor and the microcode patches activated.
* But the following should be at least safe.
*/
- rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
- CPM_DATAONLY_SIZE);
+ rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
}
/* This function returns an index into the DPRAM area.
*/
-uint cpm_dpalloc(uint size, uint align)
+unsigned long cpm_dpalloc(uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
@@ -152,17 +151,17 @@
start = rh_alloc(&cpm_dpmem_info, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
- return (uint)start;
+ return start;
}
EXPORT_SYMBOL(cpm_dpalloc);
-int cpm_dpfree(uint offset)
+int cpm_dpfree(unsigned long offset)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
- ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ ret = rh_free(&cpm_dpmem_info, offset);
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
return ret;
@@ -170,17 +169,17 @@
EXPORT_SYMBOL(cpm_dpfree);
/* not sure if this is ever needed */
-uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
{
- void *start;
+ unsigned long start;
unsigned long flags;
spin_lock_irqsave(&cpm_dpmem_lock, flags);
cpm_dpmem_info.alignment = align;
- start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
- return (uint)start;
+ return start;
}
EXPORT_SYMBOL(cpm_dpalloc_fixed);
@@ -190,7 +189,7 @@
}
EXPORT_SYMBOL(cpm_dpdump);
-void *cpm_dpram_addr(uint offset)
+void *cpm_dpram_addr(unsigned long offset)
{
return (void *)&cpm2_immr->im_dprambase[offset];
}
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
index c1583f4..45b797b 100644
--- a/arch/ppc/syslib/harrier.c
+++ b/arch/ppc/syslib/harrier.c
@@ -210,7 +210,7 @@
* This assumes that PPCBug has initialized the memory controller (SMC)
* on the Harrier correctly (i.e., it does no sanity checking).
* It also assumes that the memory base registers are set to configure the
- * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
+ * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
* however, RAM base registers can be skipped (e.g. A, B, C are set,
* D is skipped but E is set is okay).
*/
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
index c5bf16b..86821d8 100644
--- a/arch/ppc/syslib/hawk_common.c
+++ b/arch/ppc/syslib/hawk_common.c
@@ -165,7 +165,7 @@
processor_pci_mem_start +
hose->mem_space.start) | 0x0);
- /* Map MPIC into vitual memory */
+ /* Map MPIC into virtual memory */
OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
return 0;
@@ -176,7 +176,7 @@
* This assumes that PPCBug has initialized the memory controller (SMC)
* on the Falcon/HAWK correctly (i.e., it does no sanity checking).
* It also assumes that the memory base registers are set to configure the
- * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
+ * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
* however, RAM base registers can be skipped (e.g. A, B, C are set,
* D is skipped but E is set is okay).
*/
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
index e3b586b..fe860d5 100644
--- a/arch/ppc/syslib/m82xx_pci.c
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -197,7 +197,7 @@
CPM high 0b0000
CPM middle 0b0001
CPM low 0b0010
- PCI reguest 0b0011
+ PCI request 0b0011
Reserved 0b0100
Reserved 0b0101
Internal Core 0b0110
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
index 2fc7c41..437a294 100644
--- a/arch/ppc/syslib/mpc10x_common.c
+++ b/arch/ppc/syslib/mpc10x_common.c
@@ -432,7 +432,7 @@
phys_eumb_base);
}
- /* IRQ's are determined at runtime */
+ /* IRQs are determined at runtime */
ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
@@ -646,7 +646,7 @@
openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
/* Skip reserved space and map Message Unit Interrupt (I2O) */
openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
- /* Skip reserved space and map Serial Interupts */
+ /* Skip reserved space and map Serial Interrupts */
openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
openpic_init(NUM_8259_INTERRUPTS);
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 80c6090..ecfa2c0 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -252,7 +252,7 @@
out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
/* Disable XLB pipelining */
- /* (cfr errate 292. We could do this only just before ATA PIO
+ /* (cfr errata 292. We could do this only just before ATA PIO
transaction and re-enable it after ...) */
out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
index 31fb565..c05ac87 100644
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ b/arch/ppc/syslib/mpc8xx_devices.c
@@ -21,7 +21,7 @@
#include <asm/irq.h>
#include <asm/ppc_sys.h>
-/* We use offsets for IORESOURCE_MEM to do not set dependences at compile time.
+/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time.
* They will get fixed up by mach_mpc8xx_fixup
*/
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index a6f8b68..8485a68 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -490,7 +490,7 @@
/*
* mv64x60_init()
*
- * Initialze the bridge based on setting passed in via 'si'. The bridge
+ * Initialize the bridge based on setting passed in via 'si'. The bridge
* handle, 'bh', will be set so that it can be used to make subsequent
* calls to routines in this file.
*/
@@ -1704,7 +1704,7 @@
/*
* gt64260a_chip_specific_init()
*
- * Implement errata work arounds for the GT64260A.
+ * Implement errata workarounds for the GT64260A.
*/
static void __init
gt64260a_chip_specific_init(struct mv64x60_handle *bh,
@@ -1776,7 +1776,7 @@
/*
* gt64260b_chip_specific_init()
*
- * Implement errata work arounds for the GT64260B.
+ * Implement errata workarounds for the GT64260B.
*/
static void __init
gt64260b_chip_specific_init(struct mv64x60_handle *bh,
@@ -2316,7 +2316,7 @@
/*
* mv64360_chip_specific_init()
*
- * Implement errata work arounds for the MV64360.
+ * Implement errata workarounds for the MV64360.
*/
static void __init
mv64360_chip_specific_init(struct mv64x60_handle *bh,
@@ -2336,7 +2336,7 @@
/*
* mv64460_chip_specific_init()
*
- * Implement errata work arounds for the MV64460.
+ * Implement errata workarounds for the MV64460.
*/
static void __init
mv64460_chip_specific_init(struct mv64x60_handle *bh,
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
index 50c5562..491fe9a 100644
--- a/arch/ppc/syslib/ocp.c
+++ b/arch/ppc/syslib/ocp.c
@@ -27,7 +27,7 @@
* device model. The devices on the OCP bus are seeded by an
* an initial OCP device array created by the arch-specific
* Device entries can be added/removed/modified through OCP
- * helper functions to accomodate system and board-specific
+ * helper functions to accommodate system and board-specific
* parameters commonly found in embedded systems. OCP also
* provides a standard method for devices to describe extended
* attributes about themselves to the system. A standard access
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
index 607ebd1..c3b7b8b 100644
--- a/arch/ppc/syslib/ppc403_pic.c
+++ b/arch/ppc/syslib/ppc403_pic.c
@@ -112,7 +112,7 @@
/*
* Disable all external interrupts until they are
- * explicity requested.
+ * explicitly requested.
*/
ppc_cached_irq_mask[0] = 0;
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
index d6d838b..9e90356 100644
--- a/arch/ppc/syslib/ppc405_pci.c
+++ b/arch/ppc/syslib/ppc405_pci.c
@@ -137,7 +137,7 @@
hose_a->pci_mem_offset = 0;
/* Setup bridge memory/IO ranges & resources
- * TODO: Handle firmwares setting up a legacy ISA mem base
+ * TODO: Handle firmware setting up a legacy ISA mem base
*/
hose_a->io_space.start = PPC405_PCI_LOWER_IO;
hose_a->io_space.end = PPC405_PCI_UPPER_IO;
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
index 1eef4ff..bd30186 100644
--- a/arch/ppc/syslib/ppc4xx_dma.c
+++ b/arch/ppc/syslib/ppc4xx_dma.c
@@ -241,7 +241,7 @@
}
/*
- * Returns the number of bytes left to be transfered.
+ * Returns the number of bytes left to be transferred.
* After a DMA transfer, this should return zero.
* Reading this while a DMA transfer is still in progress will return
* unpredictable results.
diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c
index 2b09780..af2425e 100644
--- a/arch/ppc/syslib/ppc85xx_rio.c
+++ b/arch/ppc/syslib/ppc85xx_rio.c
@@ -349,7 +349,7 @@
* @dev_instance: Pointer to interrupt-specific data
*
* Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurence.
+ * mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
mpc85xx_rio_tx_handler(int irq, void *dev_instance)
@@ -516,7 +516,7 @@
* @dev_instance: Pointer to interrupt-specific data
*
* Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurence.
+ * mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
mpc85xx_rio_rx_handler(int irq, void *dev_instance)
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
index 6fd4cdb..3b82333 100644
--- a/arch/ppc/syslib/xilinx_pic.c
+++ b/arch/ppc/syslib/xilinx_pic.c
@@ -130,7 +130,7 @@
/*
* Disable all external interrupts until they are
- * explicity requested.
+ * explicitly requested.
*/
intc_out_be32(intc + IER, 0);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1a84719..098c62c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -4,27 +4,23 @@
#
config MMU
- bool
- default y
+ def_bool y
config ZONE_DMA
def_bool y
depends on 64BIT
config LOCKDEP_SUPPORT
- bool
- default y
+ def_bool y
config STACKTRACE_SUPPORT
- bool
- default y
+ def_bool y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
- bool
- default y
+ def_bool y
config ARCH_HAS_ILOG2_U32
bool
@@ -35,8 +31,7 @@
default n
config GENERIC_HWEIGHT
- bool
- default y
+ def_bool y
config GENERIC_TIME
def_bool y
@@ -55,8 +50,7 @@
mainmenu "Linux Kernel Configuration"
config S390
- bool
- default y
+ def_bool y
source "init/Kconfig"
@@ -280,6 +274,10 @@
config ARCH_POPULATES_NODE_MAP
def_bool y
+comment "Kernel preemption"
+
+source "kernel/Kconfig.preempt"
+
source "mm/Kconfig"
config HOLES_IN_ZONE
@@ -320,17 +318,6 @@
comment "Misc"
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say N if you are unsure.
-
config IPL
bool "Builtin IPL record support"
help
@@ -488,6 +475,8 @@
This can also be compiled as a module, which will be called
appldata_net_sum.o.
+source kernel/Kconfig.hz
+
config NO_IDLE_HZ
bool "No HZ timer ticks in idle"
help
@@ -535,18 +524,12 @@
source "net/Kconfig"
config PCMCIA
- bool
- default n
+ def_bool n
-source "drivers/base/Kconfig"
+config CCW
+ def_bool y
-source "drivers/connector/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/s390/Kconfig"
-
-source "drivers/net/Kconfig"
+source "drivers/Kconfig"
source "fs/Kconfig"
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 0e4da8a..485b60c 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Wed Feb 21 10:44:30 2007
+# Linux kernel version: 2.6.21
+# Thu May 10 15:18:19 2007
#
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
@@ -14,6 +14,7 @@
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_BUG=y
CONFIG_NO_IOMEM=y
+CONFIG_NO_DMA=y
CONFIG_S390=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -41,9 +42,11 @@
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -60,12 +63,14 @@
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -128,6 +133,14 @@
CONFIG_STACK_GUARD=256
# CONFIG_WARN_STACK is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
+
+#
+# Kernel preemption
+#
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -150,7 +163,6 @@
#
# Misc
#
-CONFIG_PREEMPT=y
CONFIG_IPL=y
# CONFIG_IPL_TAPE is not set
CONFIG_IPL_VM=y
@@ -163,6 +175,11 @@
CONFIG_VIRT_TIMER=y
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_APPLDATA_BASE is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
CONFIG_NO_IDLE_HZ=y
CONFIG_NO_IDLE_HZ_INIT=y
CONFIG_S390_HYPFS_FS=y
@@ -177,7 +194,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -216,6 +232,7 @@
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
@@ -240,7 +257,12 @@
#
# SCTP Configuration (EXPERIMENTAL)
#
-# CONFIG_IP_SCTP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
@@ -263,9 +285,6 @@
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
@@ -308,11 +327,14 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_RFKILL is not set
# CONFIG_PCMCIA is not set
+CONFIG_CCW=y
+
+#
+# Device Drivers
+#
#
# Generic Driver Options
@@ -330,6 +352,37 @@
# CONFIG_CONNECTOR is not set
#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# S/390 block device drivers
+#
+CONFIG_BLK_DEV_XPRAM=m
+# CONFIG_DCSSBLK is not set
+CONFIG_DASD=y
+CONFIG_DASD_PROFILE=y
+CONFIG_DASD_ECKD=y
+CONFIG_DASD_FBA=y
+CONFIG_DASD_DIAG=y
+CONFIG_DASD_EER=y
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
@@ -356,6 +409,7 @@
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -372,34 +426,6 @@
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
-CONFIG_CCW=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# S/390 block device drivers
-#
-CONFIG_BLK_DEV_XPRAM=m
-# CONFIG_DCSSBLK is not set
-CONFIG_DASD=y
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=y
-CONFIG_DASD_FBA=y
-CONFIG_DASD_DIAG=y
-CONFIG_DASD_EER=y
-# CONFIG_ATA_OVER_ETH is not set
#
# Multi-device support (RAID and LVM)
@@ -421,56 +447,7 @@
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_EMC is not set
-
-#
-# Character device drivers
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=2048
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-
-#
-# S/390 character device drivers
-#
-CONFIG_TN3270=y
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_CCW_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_S390_TAPE=m
-
-#
-# S/390 tape interface support
-#
-CONFIG_S390_TAPE_BLOCK=y
-
-#
-# S/390 tape hardware support
-#
-CONFIG_S390_TAPE_34XX=m
-# CONFIG_S390_TAPE_3590 is not set
-# CONFIG_VMLOGRDR is not set
-# CONFIG_VMCP is not set
-# CONFIG_MONREADER is not set
-CONFIG_MONWRITER=m
-
-#
-# Cryptographic devices
-#
-CONFIG_ZCRYPT=m
-# CONFIG_ZCRYPT_MONOLITHIC is not set
+# CONFIG_DM_DELAY is not set
#
# Network device support
@@ -482,10 +459,6 @@
CONFIG_TUN=m
#
-# PHY device support
-#
-
-#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -498,6 +471,7 @@
#
# Ethernet (10000 Mbit)
#
+CONFIG_MLX4_DEBUG=y
#
# Token Ring devices
@@ -505,11 +479,6 @@
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
# Wan interfaces
#
# CONFIG_WAN is not set
@@ -537,6 +506,56 @@
# CONFIG_NET_POLL_CONTROLLER is not set
#
+# Character devices
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# S/390 character device drivers
+#
+CONFIG_TN3270=y
+CONFIG_TN3270_TTY=y
+CONFIG_TN3270_FS=m
+CONFIG_TN3270_CONSOLE=y
+CONFIG_TN3215=y
+CONFIG_TN3215_CONSOLE=y
+CONFIG_CCW_CONSOLE=y
+CONFIG_SCLP=y
+CONFIG_SCLP_TTY=y
+CONFIG_SCLP_CONSOLE=y
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_SCLP_CPI=m
+CONFIG_S390_TAPE=m
+
+#
+# S/390 tape interface support
+#
+CONFIG_S390_TAPE_BLOCK=y
+
+#
+# S/390 tape hardware support
+#
+CONFIG_S390_TAPE_34XX=m
+# CONFIG_S390_TAPE_3590 is not set
+# CONFIG_VMLOGRDR is not set
+# CONFIG_VMCP is not set
+# CONFIG_MONREADER is not set
+CONFIG_MONWRITER=m
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -628,6 +647,7 @@
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -658,6 +678,7 @@
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
@@ -668,8 +689,6 @@
# Distributed Lock Manager
#
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
@@ -693,7 +712,6 @@
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -729,12 +747,13 @@
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -745,6 +764,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=m
# CONFIG_CRYPTO_BLOWFISH is not set
@@ -771,6 +791,8 @@
# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_AES_S390 is not set
CONFIG_S390_PRNG=m
+CONFIG_ZCRYPT=m
+# CONFIG_ZCRYPT_MONOLITHIC is not set
#
# Library routines
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index ba5d316..8e1ea1c 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -477,7 +477,7 @@
goto fail_diag;
}
}
- kset_set_kset_s(&s390_subsys, hypervisor_subsys);
+ kobj_set_kset_s(&s390_subsys, hypervisor_subsys);
rc = subsystem_register(&s390_subsys);
if (rc)
goto fail_sysfs;
diff --git a/arch/s390/kernel/audit.c b/arch/s390/kernel/audit.c
index 0741d91..d1c76fe 100644
--- a/arch/s390/kernel/audit.c
+++ b/arch/s390/kernel/audit.c
@@ -23,6 +23,20 @@
~0U
};
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_COMPAT
+ if (arch == AUDIT_ARCH_S390)
+ return 1;
+#endif
+ return 0;
+}
+
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_COMPAT
@@ -51,15 +65,18 @@
extern __u32 s390_write_class[];
extern __u32 s390_read_class[];
extern __u32 s390_chattr_class[];
+ extern __u32 s390_signal_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, s390_write_class);
audit_register_class(AUDIT_CLASS_READ_32, s390_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, s390_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, s390_chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL_32, s390_signal_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
return 0;
}
diff --git a/arch/s390/kernel/compat_audit.c b/arch/s390/kernel/compat_audit.c
index 16d9436..0569f51 100644
--- a/arch/s390/kernel/compat_audit.c
+++ b/arch/s390/kernel/compat_audit.c
@@ -21,6 +21,11 @@
~0U
};
+unsigned s390_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
int s390_classify_syscall(unsigned syscall)
{
switch(syscall) {
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 0ea048d..367caf9 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -816,23 +816,23 @@
{
int rc;
- rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ rc = sysfs_create_group(&ipl_subsys.kobj,
&ipl_fcp_attr_group);
if (rc)
goto out;
- rc = sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+ rc = sysfs_create_bin_file(&ipl_subsys.kobj,
&ipl_parameter_attr);
if (rc)
goto out_ipl_parm;
- rc = sysfs_create_bin_file(&ipl_subsys.kset.kobj,
+ rc = sysfs_create_bin_file(&ipl_subsys.kobj,
&ipl_scp_data_attr);
if (!rc)
goto out;
- sysfs_remove_bin_file(&ipl_subsys.kset.kobj, &ipl_parameter_attr);
+ sysfs_remove_bin_file(&ipl_subsys.kobj, &ipl_parameter_attr);
out_ipl_parm:
- sysfs_remove_group(&ipl_subsys.kset.kobj, &ipl_fcp_attr_group);
+ sysfs_remove_group(&ipl_subsys.kobj, &ipl_fcp_attr_group);
out:
return rc;
}
@@ -846,7 +846,7 @@
return rc;
switch (ipl_info.type) {
case IPL_TYPE_CCW:
- rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ rc = sysfs_create_group(&ipl_subsys.kobj,
&ipl_ccw_attr_group);
break;
case IPL_TYPE_FCP:
@@ -854,11 +854,11 @@
rc = ipl_register_fcp_files();
break;
case IPL_TYPE_NSS:
- rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ rc = sysfs_create_group(&ipl_subsys.kobj,
&ipl_nss_attr_group);
break;
default:
- rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ rc = sysfs_create_group(&ipl_subsys.kobj,
&ipl_unknown_attr_group);
break;
}
@@ -885,7 +885,7 @@
if (!MACHINE_IS_VM)
return 0;
- rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_nss_attr_group);
+ rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_nss_attr_group);
if (rc)
return rc;
strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1);
@@ -900,7 +900,7 @@
reipl_block_ccw = (void *) get_zeroed_page(GFP_KERNEL);
if (!reipl_block_ccw)
return -ENOMEM;
- rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_ccw_attr_group);
+ rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_ccw_attr_group);
if (rc) {
free_page((unsigned long)reipl_block_ccw);
return rc;
@@ -938,7 +938,7 @@
reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
if (!reipl_block_fcp)
return -ENOMEM;
- rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_fcp_attr_group);
+ rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_fcp_attr_group);
if (rc) {
free_page((unsigned long)reipl_block_fcp);
return rc;
@@ -990,7 +990,7 @@
dump_block_ccw = (void *) get_zeroed_page(GFP_KERNEL);
if (!dump_block_ccw)
return -ENOMEM;
- rc = sysfs_create_group(&dump_subsys.kset.kobj, &dump_ccw_attr_group);
+ rc = sysfs_create_group(&dump_subsys.kobj, &dump_ccw_attr_group);
if (rc) {
free_page((unsigned long)dump_block_ccw);
return rc;
@@ -1014,7 +1014,7 @@
dump_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
if (!dump_block_fcp)
return -ENOMEM;
- rc = sysfs_create_group(&dump_subsys.kset.kobj, &dump_fcp_attr_group);
+ rc = sysfs_create_group(&dump_subsys.kobj, &dump_fcp_attr_group);
if (rc) {
free_page((unsigned long)dump_block_fcp);
return rc;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 8b924b3..d855cdb 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -253,7 +253,10 @@
unsigned long address, unsigned long error_code)
{
u16 instruction;
- int rc, compat;
+ int rc;
+#ifdef CONFIG_COMPAT
+ int compat;
+#endif
pagefault_disable();
rc = __get_user(instruction, (u16 __user *) regs->psw.addr);
diff --git a/arch/sparc/defconfig b/arch/sparc/defconfig
index 79e5489..38bd79f 100644
--- a/arch/sparc/defconfig
+++ b/arch/sparc/defconfig
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sun Dec 17 14:20:47 2006
+# Linux kernel version: 2.6.22-rc1
+# Mon May 14 03:25:14 2007
#
CONFIG_MMU=y
CONFIG_HIGHMEM=y
+CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -23,14 +24,17 @@
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -46,14 +50,19 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -107,7 +116,7 @@
CONFIG_SUN_PM=y
# CONFIG_SUN4 is not set
CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
# CONFIG_SPARC_LED is not set
@@ -124,6 +133,7 @@
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
#
# Networking
@@ -133,14 +143,15 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -170,6 +181,7 @@
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -229,7 +241,18 @@
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -242,16 +265,13 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
@@ -262,6 +282,7 @@
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -280,15 +301,16 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -322,11 +344,12 @@
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
-CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
@@ -366,12 +389,9 @@
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_ESP_CORE=y
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -390,6 +410,7 @@
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
@@ -410,10 +431,6 @@
# ARCnet devices
#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -435,10 +452,7 @@
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
@@ -454,15 +468,16 @@
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_DEBUG=y
#
# Token Ring devices
@@ -470,13 +485,10 @@
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -528,9 +540,17 @@
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -578,14 +598,9 @@
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_RTC=m
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
@@ -595,10 +610,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
@@ -611,32 +623,39 @@
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
@@ -644,7 +663,6 @@
#
# CONFIG_PROM_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -655,6 +673,7 @@
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
@@ -672,10 +691,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -719,10 +734,6 @@
#
#
-# Virtualization
-#
-
-#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
@@ -801,6 +812,7 @@
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
@@ -827,6 +839,7 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -839,7 +852,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
+# CONFIG_AFS_DEBUG is not set
# CONFIG_9P_FS is not set
#
@@ -913,15 +926,14 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -932,12 +944,14 @@
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -961,8 +975,11 @@
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
@@ -977,6 +994,7 @@
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
@@ -989,9 +1007,12 @@
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sparc/kernel/auxio.c b/arch/sparc/kernel/auxio.c
index 118f3ec..baf4ed3 100644
--- a/arch/sparc/kernel/auxio.c
+++ b/arch/sparc/kernel/auxio.c
@@ -88,7 +88,7 @@
break;
case sun4m:
if(!auxio_register)
- break; /* VME chassic sun4m, no auxio. */
+ break; /* VME chassis sun4m, no auxio. */
regval = sbus_readb(auxio_register);
sbus_writeb(((regval | bits_on) & ~bits_off) | AUXIO_ORMEIN4M,
auxio_register);
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 97da13c..9a219e8 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -19,7 +19,7 @@
#include <asm/ptrace.h>
#include <asm/psr.h>
#include <asm/page.h>
-#include <linux/kdebug.h>
+#include <asm/kdebug.h>
#include <asm/winmacro.h>
#include <asm/thread_info.h> /* TI_UWINMASK */
#include <asm/errno.h>
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 987ec67..62182d2 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -617,7 +617,7 @@
* size must be the same as what as passed into pci_alloc_consistent,
* and likewise dma_addr must be the same as what *dma_addrp was set to.
*
- * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * References to the memory and mappings associated with cpu_addr/dma_addr
* past this call are illegal.
*/
void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index bdbefa8..f257a67 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -1,6 +1,6 @@
/* $Id: irq.c,v 1.114 2001/12/11 04:55:51 davem Exp $
* arch/sparc/kernel/irq.c: Interrupt request handling routines. On the
- * Sparc the IRQ's are basically 'cast in stone'
+ * Sparc the IRQs are basically 'cast in stone'
* and you are supposed to probe the prom's device
* node trees to find out who's got which IRQ.
*
@@ -330,7 +330,7 @@
irq_enter();
disable_pil_irq(irq);
#ifdef CONFIG_SMP
- /* Only rotate on lower priority IRQ's (scsi, ethernet, etc.). */
+ /* Only rotate on lower priority IRQs (scsi, ethernet, etc.). */
if((sparc_cpu_model==sun4m) && (irq < 10))
smp4m_irq_rotate(cpu);
#endif
@@ -371,7 +371,7 @@
}
#endif
-/* Fast IRQ's on the Sparc can only have one routine attached to them,
+/* Fast IRQs on the Sparc can only have one routine attached to them,
* thus no sharing possible.
*/
int request_fast_irq(unsigned int irq,
@@ -608,7 +608,7 @@
break;
default:
- prom_printf("Cannot initialize IRQ's on this Sun machine...");
+ prom_printf("Cannot initialize IRQs on this Sun machine...");
break;
}
btfixup();
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 5ca7e8f..7917711 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -755,7 +755,7 @@
static __inline__ unsigned long do_gettimeoffset(void)
{
/*
- * We devide all to 100
+ * We divide all by 100
* to have microsecond resolution and to avoid overflow
*/
unsigned long count =
@@ -956,7 +956,7 @@
* Also, think for a moment about likes of floppy.c that
* include architecture specific parts. They may want to redefine ins/outs.
*
- * We do not use horroble macroses here because we want to
+ * We do not use horrible macros here because we want to
* advance pointer by sizeof(size).
*/
void outsb(unsigned long addr, const void *src, unsigned long count)
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 2940d2c..8c37f8f 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -683,7 +683,7 @@
* NOTE! Only a kernel-only process(ie the swapper or direct descendants
* who haven't done an "execve()") should use this: it will work within
* a system call from a "real" process, but the process memory space will
- * not be free'd until both the parent and the child have exited.
+ * not be freed until both the parent and the child have exited.
*/
pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 116d6a2..396797e 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -521,7 +521,7 @@
lvl14_save[2] += smp4d_ticker - real_irq_entry;
/* For SMP we use the level 14 ticker, however the bootup code
- * has copied the firmwares level 14 vector into boot cpu's
+ * has copied the firmware's level 14 vector into the boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index a654c16..91a803e 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -299,7 +299,7 @@
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
- * has copied the firmwares level 14 vector into boot cpu's
+ * has copied the firmware's level 14 vector into the boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index e3f5b8e..90b52d4 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,7 +80,7 @@
/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
/*300*/ .long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
/*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
-/*310*/ .long sys_utimensat
+/*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd, sys_eventfd
#ifdef CONFIG_SUNOS_EMUL
/* Now the SunOS syscall table. */
@@ -197,6 +197,7 @@
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys
-/*310*/ .long sunos_nosys
+/*310*/ .long sunos_nosys, sunos_nosys, sunos_nosys
+ .long sunos_nosys
#endif
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index dc8b598..27fdac9 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -5,7 +5,7 @@
* Copyright (c) 2002 Pete Zaitcev (zaitcev@yahoo.com)
*
* We used to warn all over the code: DO NOT USE prom_printf(),
- * and yet people do. Anton's banking code was outputing banks
+ * and yet people do. Anton's banking code was outputting banks
* with prom_printf for most of the 2.4 lifetime. Since an effective
* stick is not available, we deployed a carrot: an early printk
* through PROM by means of -p boot option. This ought to fix it.
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index ad8d6b2..831781c 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -226,9 +226,6 @@
def_bool y
select SPARSEMEM_STATIC
-config LARGE_ALLOCS
- def_bool y
-
source "mm/Kconfig"
config ISA
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 37c2d36..65840a6 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Sun May 6 22:46:54 2007
+# Linux kernel version: 2.6.22-rc1
+# Mon May 14 04:17:48 2007
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -9,6 +9,7 @@
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_QUICKLIST=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
@@ -49,6 +50,7 @@
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
@@ -66,14 +68,20 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
#
# Loadable module support
@@ -137,7 +145,6 @@
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_LARGE_ALLOCS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -148,6 +155,7 @@
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
@@ -305,6 +313,7 @@
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
@@ -359,8 +368,10 @@
#
# Misc devices
#
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -379,6 +390,7 @@
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
@@ -386,6 +398,7 @@
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
@@ -495,10 +508,6 @@
# CONFIG_SCSI_ESP_CORE is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
#
@@ -521,6 +530,7 @@
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
#
# Fusion MPT device support
@@ -533,6 +543,7 @@
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
#
@@ -553,10 +564,6 @@
# ARCnet devices
#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
#
@@ -596,10 +603,7 @@
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
@@ -619,16 +623,15 @@
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_DEBUG=y
#
# Token Ring devices
@@ -642,8 +645,14 @@
# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -711,11 +720,18 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_POLLDEV is not set
@@ -762,14 +778,9 @@
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
@@ -779,6 +790,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
@@ -841,13 +853,10 @@
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -874,6 +883,7 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
@@ -901,23 +911,30 @@
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -949,7 +966,10 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
# CONFIG_FB_XVR500 is not set
# CONFIG_FB_XVR2500 is not set
# CONFIG_FB_PCI is not set
@@ -972,10 +992,6 @@
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
@@ -1083,6 +1099,7 @@
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
#
# ALSA Sparc devices
@@ -1092,7 +1109,7 @@
# CONFIG_SND_SUN_DBRI is not set
#
-# SoC audio support
+# System on Chip audio support
#
# CONFIG_SND_SOC is not set
@@ -1178,37 +1195,10 @@
# CONFIG_USB_LIBUSUAL is not set
#
-# USB Input Devices
-#
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
@@ -1252,10 +1242,6 @@
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
#
@@ -1299,14 +1285,6 @@
#
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
@@ -1486,11 +1464,9 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1574,6 +1550,7 @@
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
@@ -1581,3 +1558,4 @@
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sparc64/kernel/audit.c b/arch/sparc64/kernel/audit.c
index aef19cc..24d7f4b 100644
--- a/arch/sparc64/kernel/audit.c
+++ b/arch/sparc64/kernel/audit.c
@@ -23,6 +23,20 @@
~0U
};
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_SPARC32_COMPAT
+ if (arch == AUDIT_ARCH_SPARC)
+ return 1;
+#endif
+ return 0;
+}
+
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_SPARC32_COMPAT
@@ -51,15 +65,18 @@
extern __u32 sparc32_write_class[];
extern __u32 sparc32_read_class[];
extern __u32 sparc32_chattr_class[];
+ extern __u32 sparc32_signal_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, sparc32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, sparc32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, sparc32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, sparc32_chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL_32, sparc32_signal_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
return 0;
}
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index cca96c9..c197948 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -20,6 +20,11 @@
~0U
};
+unsigned sparc32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
int sparc32_classify_syscall(unsigned syscall)
{
switch(syscall) {
diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c
index ec10f7e..0e03c8e 100644
--- a/arch/sparc64/kernel/devices.c
+++ b/arch/sparc64/kernel/devices.c
@@ -21,7 +21,7 @@
#include <asm/timer.h>
#include <asm/cpudata.h>
-/* Used to synchronize acceses to NatSemi SUPER I/O chip configure
+/* Used to synchronize accesses to NatSemi SUPER I/O chip configure
* operations in asm/ns87303.h
*/
DEFINE_SPINLOCK(ns87303_lock);
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index 9ac9a30..16cc46a 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -537,6 +537,13 @@
return 0;
}
+ /* When we miss an I/O space match on PCI, just pass it up
+ * to the next PCI bridge and/or controller.
+ */
+ if (!strcmp(bus->name, "pci") &&
+ (addr[0] & 0x03000000) == 0x01000000)
+ return 0;
+
return 1;
}
@@ -596,7 +603,7 @@
/* Convert to num-entries. */
num_reg /= na + ns;
- /* Prevent overruning the op->resources[] array. */
+ /* Prevent overrunning the op->resources[] array. */
if (num_reg > PROMREG_MAX) {
printk(KERN_WARNING "%s: Too many regs (%d), "
"limiting to %d.\n",
@@ -904,7 +911,7 @@
op->num_irqs = 0;
}
- /* Prevent overruning the op->irqs[] array. */
+ /* Prevent overrunning the op->irqs[] array. */
if (op->num_irqs > PROMINTR_MAX) {
printk(KERN_WARNING "%s: Too many irqs (%d), "
"limiting to %d.\n",
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index d85e1ed..d4c077d 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -377,7 +377,7 @@
const char *type;
u32 class;
- dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
+ dev = alloc_pci_dev();
if (!dev)
return NULL;
@@ -495,8 +495,8 @@
*last_p = last;
}
-static void __init pci_resource_adjust(struct resource *res,
- struct resource *root)
+static void pci_resource_adjust(struct resource *res,
+ struct resource *root)
{
res->start += root->start;
res->end += root->start;
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 76faaa8..f974fef 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -14,6 +14,200 @@
#include <asm/oplib.h>
#include "pci_impl.h"
+#include "pci_sun4v.h"
+
+static int config_out_of_range(struct pci_pbm_info *pbm,
+ unsigned long bus,
+ unsigned long devfn,
+ unsigned long reg)
+{
+ if (bus < pbm->pci_first_busno ||
+ bus > pbm->pci_last_busno)
+ return 1;
+ return 0;
+}
+
+static void *sun4u_config_mkaddr(struct pci_pbm_info *pbm,
+ unsigned long bus,
+ unsigned long devfn,
+ unsigned long reg)
+{
+ unsigned long rbits = pbm->config_space_reg_bits;
+
+ if (config_out_of_range(pbm, bus, devfn, reg))
+ return NULL;
+
+ reg = (reg & ((1 << rbits) - 1));
+ devfn <<= rbits;
+ bus <<= rbits + 8;
+
+ return (void *) (pbm->config_space | bus | devfn | reg);
+}
+
+static int sun4u_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ struct pci_pbm_info *pbm = bus_dev->sysdata;
+ unsigned char bus = bus_dev->number;
+ u32 *addr;
+ u16 tmp16;
+ u8 tmp8;
+
+ if (bus_dev == pbm->pci_bus && devfn == 0x00)
+ return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
+ size, value);
+
+ switch (size) {
+ case 1:
+ *value = 0xff;
+ break;
+ case 2:
+ *value = 0xffff;
+ break;
+ case 4:
+ *value = 0xffffffff;
+ break;
+ }
+
+ addr = sun4u_config_mkaddr(pbm, bus, devfn, where);
+ if (!addr)
+ return PCIBIOS_SUCCESSFUL;
+
+ switch (size) {
+ case 1:
+ pci_config_read8((u8 *)addr, &tmp8);
+ *value = (u32) tmp8;
+ break;
+
+ case 2:
+ if (where & 0x01) {
+ printk("pci_read_config_word: misaligned reg [%x]\n",
+ where);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ pci_config_read16((u16 *)addr, &tmp16);
+ *value = (u32) tmp16;
+ break;
+
+ case 4:
+ if (where & 0x03) {
+ printk("pci_read_config_dword: misaligned reg [%x]\n",
+ where);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ pci_config_read32(addr, value);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int sun4u_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct pci_pbm_info *pbm = bus_dev->sysdata;
+ unsigned char bus = bus_dev->number;
+ u32 *addr;
+
+ if (bus_dev == pbm->pci_bus && devfn == 0x00)
+ return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
+ size, value);
+ addr = sun4u_config_mkaddr(pbm, bus, devfn, where);
+ if (!addr)
+ return PCIBIOS_SUCCESSFUL;
+
+ switch (size) {
+ case 1:
+ pci_config_write8((u8 *)addr, value);
+ break;
+
+ case 2:
+ if (where & 0x01) {
+ printk("pci_write_config_word: misaligned reg [%x]\n",
+ where);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ pci_config_write16((u16 *)addr, value);
+ break;
+
+ case 4:
+ if (where & 0x03) {
+ printk("pci_write_config_dword: misaligned reg [%x]\n",
+ where);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ pci_config_write32(addr, value);
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sun4u_pci_ops = {
+ .read = sun4u_read_pci_cfg,
+ .write = sun4u_write_pci_cfg,
+};
+
+static int sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ struct pci_pbm_info *pbm = bus_dev->sysdata;
+ u32 devhandle = pbm->devhandle;
+ unsigned int bus = bus_dev->number;
+ unsigned int device = PCI_SLOT(devfn);
+ unsigned int func = PCI_FUNC(devfn);
+ unsigned long ret;
+
+ if (bus_dev == pbm->pci_bus && devfn == 0x00)
+ return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
+ size, value);
+ if (config_out_of_range(pbm, bus, devfn, where)) {
+ ret = ~0UL;
+ } else {
+ ret = pci_sun4v_config_get(devhandle,
+ HV_PCI_DEVICE_BUILD(bus, device, func),
+ where, size);
+ }
+ switch (size) {
+ case 1:
+ *value = ret & 0xff;
+ break;
+ case 2:
+ *value = ret & 0xffff;
+ break;
+ case 4:
+ *value = ret & 0xffffffff;
+ break;
+ };
+
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct pci_pbm_info *pbm = bus_dev->sysdata;
+ u32 devhandle = pbm->devhandle;
+ unsigned int bus = bus_dev->number;
+ unsigned int device = PCI_SLOT(devfn);
+ unsigned int func = PCI_FUNC(devfn);
+ unsigned long ret;
+
+ if (bus_dev == pbm->pci_bus && devfn == 0x00)
+ return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
+ size, value);
+ if (config_out_of_range(pbm, bus, devfn, where)) {
+ /* Do nothing. */
+ } else {
+ ret = pci_sun4v_config_put(devhandle,
+ HV_PCI_DEVICE_BUILD(bus, device, func),
+ where, size, value);
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sun4v_pci_ops = {
+ .read = sun4v_read_pci_cfg,
+ .write = sun4v_write_pci_cfg,
+};
void pci_get_pbm_props(struct pci_pbm_info *pbm)
{
diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c
index 2e0eb4e..7f5d473 100644
--- a/arch/sparc64/kernel/pci_fire.c
+++ b/arch/sparc64/kernel/pci_fire.c
@@ -27,138 +27,6 @@
"i" (ASI_PHYS_BYPASS_EC_E) \
: "memory")
-/* Fire config space address format is nearly identical to
- * that of SCHIZO and PSYCHO, except that in order to accomodate
- * PCI-E extended config space the encoding can handle 12 bits
- * of register address:
- *
- * 32 28 27 20 19 15 14 12 11 2 1 0
- * -------------------------------------------------
- * |0 0 0 0 0| bus | device | function | reg | 0 0 |
- * -------------------------------------------------
- */
-#define FIRE_CONFIG_BASE(PBM) ((PBM)->config_space)
-#define FIRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
- (((unsigned long)(BUS) << 20) | \
- ((unsigned long)(DEVFN) << 12) | \
- ((unsigned long)(REG)))
-
-static void *fire_pci_config_mkaddr(struct pci_pbm_info *pbm,
- unsigned char bus,
- unsigned int devfn,
- int where)
-{
- if (!pbm)
- return NULL;
- return (void *)
- (FIRE_CONFIG_BASE(pbm) |
- FIRE_CONFIG_ENCODE(bus, devfn, where));
-}
-
-/* FIRE PCI configuration space accessors. */
-
-static int fire_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 *value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
- u16 tmp16;
- u8 tmp8;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
- size, value);
- switch (size) {
- case 1:
- *value = 0xff;
- break;
- case 2:
- *value = 0xffff;
- break;
- case 4:
- *value = 0xffffffff;
- break;
- }
-
- addr = fire_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- pci_config_read8((u8 *)addr, &tmp8);
- *value = tmp8;
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_read_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read16((u16 *)addr, &tmp16);
- *value = tmp16;
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_read_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
-
- pci_config_read32(addr, value);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int fire_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
- size, value);
- addr = fire_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- pci_config_write8((u8 *)addr, value);
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_write_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_write16((u16 *)addr, value);
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_write_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
-
- pci_config_write32(addr, value);
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_fire_ops = {
- .read = fire_read_pci_cfg,
- .write = fire_write_pci_cfg,
-};
-
static void pci_fire_scan_bus(struct pci_pbm_info *pbm)
{
pbm->pci_bus = pci_scan_one_pbm(pbm);
@@ -169,7 +37,7 @@
#define FIRE_IOMMU_CONTROL 0x40000UL
#define FIRE_IOMMU_TSBBASE 0x40008UL
#define FIRE_IOMMU_FLUSH 0x40100UL
-#define FIRE_IOMMU_FLUSHINV 0x40100UL
+#define FIRE_IOMMU_FLUSHINV 0x40108UL
static void pci_fire_pbm_iommu_init(struct pci_pbm_info *pbm)
{
@@ -314,7 +182,8 @@
pci_pbm_root = pbm;
pbm->scan_bus = pci_fire_scan_bus;
- pbm->pci_ops = &pci_fire_ops;
+ pbm->pci_ops = &sun4u_pci_ops;
+ pbm->config_space_reg_bits = 12;
pbm->index = pci_num_pbms++;
diff --git a/arch/sparc64/kernel/pci_impl.h b/arch/sparc64/kernel/pci_impl.h
index 8e38023..f660c2b 100644
--- a/arch/sparc64/kernel/pci_impl.h
+++ b/arch/sparc64/kernel/pci_impl.h
@@ -77,6 +77,9 @@
/* Base of PCI Config space, can be per-PBM or shared. */
unsigned long config_space;
+ /* This will be 12 on PCI-E controllers, 8 elsewhere. */
+ unsigned long config_space_reg_bits;
+
/* State of 66MHz capabilities on this PBM. */
int is_66mhz_capable;
int all_devs_66mhz;
@@ -156,4 +159,7 @@
extern void pci_config_write16(u16 *addr, u16 val);
extern void pci_config_write32(u32 *addr, u32 val);
+extern struct pci_ops sun4u_pci_ops;
+extern struct pci_ops sun4v_pci_ops;
+
#endif /* !(PCI_IMPL_H) */
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index dfd6f9f..70d2364 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -542,7 +542,7 @@
/* Map a set of buffers described by SGLIST with NELEMS array
* elements in streaming mode for PCI DMA.
* When making changes here, inspect the assembly output. I was having
- * hard time to kepp this routine out of using stack slots for holding variables.
+ * hard time to keep this routine out of using stack slots for holding variables.
*/
static int pci_4u_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction)
{
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 2edcb1d..598393a2 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -94,122 +94,6 @@
PSYCHO_CONFIG_ENCODE(bus, devfn, where));
}
-static int psycho_out_of_range(struct pci_pbm_info *pbm,
- unsigned char bus,
- unsigned char devfn)
-{
- return ((bus == pbm->pci_first_busno) &&
- PCI_SLOT(devfn) > 8);
-}
-
-/* PSYCHO PCI configuration space accessors. */
-
-static int psycho_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 *value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
- u16 tmp16;
- u8 tmp8;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
- size, value);
-
- switch (size) {
- case 1:
- *value = 0xff;
- break;
- case 2:
- *value = 0xffff;
- break;
- case 4:
- *value = 0xffffffff;
- break;
- }
-
- addr = psycho_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- if (psycho_out_of_range(pbm, bus, devfn))
- return PCIBIOS_SUCCESSFUL;
- switch (size) {
- case 1:
- pci_config_read8((u8 *)addr, &tmp8);
- *value = (u32) tmp8;
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_read_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read16((u16 *)addr, &tmp16);
- *value = (u32) tmp16;
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_read_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read32(addr, value);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int psycho_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
- size, value);
- addr = psycho_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- if (psycho_out_of_range(pbm, bus, devfn))
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- pci_config_write8((u8 *)addr, value);
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_write_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_write16((u16 *)addr, value);
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_write_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_write32(addr, value);
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops psycho_ops = {
- .read = psycho_read_pci_cfg,
- .write = psycho_write_pci_cfg,
-};
-
/* PSYCHO error handling support. */
enum psycho_error_type {
UE_ERR, CE_ERR, PCI_ERR
@@ -1089,7 +973,8 @@
pci_pbm_root = pbm;
pbm->scan_bus = psycho_scan_bus;
- pbm->pci_ops = &psycho_ops;
+ pbm->pci_ops = &sun4u_pci_ops;
+ pbm->config_space_reg_bits = 8;
pbm->index = pci_num_pbms++;
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 4cefe6e..e237779 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -205,294 +205,9 @@
#define SABRE_MEMSPACE 0x100000000UL
#define SABRE_MEMSPACE_SIZE 0x07fffffffUL
-/* UltraSparc-IIi Programmer's Manual, page 325, PCI
- * configuration space address format:
- *
- * 32 24 23 16 15 11 10 8 7 2 1 0
- * ---------------------------------------------------------
- * |0 0 0 0 0 0 0 0 1| bus | device | function | reg | 0 0 |
- * ---------------------------------------------------------
- */
-#define SABRE_CONFIG_BASE(PBM) \
- ((PBM)->config_space | (1UL << 24))
-#define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
- (((unsigned long)(BUS) << 16) | \
- ((unsigned long)(DEVFN) << 8) | \
- ((unsigned long)(REG)))
-
static int hummingbird_p;
static struct pci_bus *sabre_root_bus;
-static void *sabre_pci_config_mkaddr(struct pci_pbm_info *pbm,
- unsigned char bus,
- unsigned int devfn,
- int where)
-{
- if (!pbm)
- return NULL;
- return (void *)
- (SABRE_CONFIG_BASE(pbm) |
- SABRE_CONFIG_ENCODE(bus, devfn, where));
-}
-
-static int sabre_out_of_range(unsigned char devfn)
-{
- if (hummingbird_p)
- return 0;
-
- return (((PCI_SLOT(devfn) == 0) && (PCI_FUNC(devfn) > 0)) ||
- ((PCI_SLOT(devfn) == 1) && (PCI_FUNC(devfn) > 1)) ||
- (PCI_SLOT(devfn) > 1));
-}
-
-static int __sabre_out_of_range(struct pci_pbm_info *pbm,
- unsigned char bus,
- unsigned char devfn)
-{
- if (hummingbird_p)
- return 0;
-
- return ((pbm->parent == 0) ||
- ((pbm == &pbm->parent->pbm_A) &&
- (bus == pbm->pci_first_busno) &&
- PCI_SLOT(devfn) > 8));
-}
-
-static int __sabre_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 *value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
- u16 tmp16;
- u8 tmp8;
-
- switch (size) {
- case 1:
- *value = 0xff;
- break;
- case 2:
- *value = 0xffff;
- break;
- case 4:
- *value = 0xffffffff;
- break;
- }
-
- addr = sabre_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- if (__sabre_out_of_range(pbm, bus, devfn))
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- pci_config_read8((u8 *) addr, &tmp8);
- *value = tmp8;
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_read_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read16((u16 *) addr, &tmp16);
- *value = tmp16;
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_read_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read32(addr, value);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sabre_read_pci_cfg(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *value)
-{
- struct pci_pbm_info *pbm = bus->sysdata;
-
- if (bus == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_read_pci_cfg(bus, devfn, where,
- size, value);
-
- if (!bus->number && sabre_out_of_range(devfn)) {
- switch (size) {
- case 1:
- *value = 0xff;
- break;
- case 2:
- *value = 0xffff;
- break;
- case 4:
- *value = 0xffffffff;
- break;
- }
- return PCIBIOS_SUCCESSFUL;
- }
-
- if (bus->number || PCI_SLOT(devfn))
- return __sabre_read_pci_cfg(bus, devfn, where, size, value);
-
- /* When accessing PCI config space of the PCI controller itself (bus
- * 0, device slot 0, function 0) there are restrictions. Each
- * register must be accessed as it's natural size. Thus, for example
- * the Vendor ID must be accessed as a 16-bit quantity.
- */
-
- switch (size) {
- case 1:
- if (where < 8) {
- u32 tmp32;
- u16 tmp16;
-
- __sabre_read_pci_cfg(bus, devfn, where & ~1, 2, &tmp32);
- tmp16 = (u16) tmp32;
- if (where & 1)
- *value = tmp16 >> 8;
- else
- *value = tmp16 & 0xff;
- } else
- return __sabre_read_pci_cfg(bus, devfn, where, 1, value);
- break;
-
- case 2:
- if (where < 8)
- return __sabre_read_pci_cfg(bus, devfn, where, 2, value);
- else {
- u32 tmp32;
- u8 tmp8;
-
- __sabre_read_pci_cfg(bus, devfn, where, 1, &tmp32);
- tmp8 = (u8) tmp32;
- *value = tmp8;
- __sabre_read_pci_cfg(bus, devfn, where + 1, 1, &tmp32);
- tmp8 = (u8) tmp32;
- *value |= tmp8 << 8;
- }
- break;
-
- case 4: {
- u32 tmp32;
- u16 tmp16;
-
- sabre_read_pci_cfg(bus, devfn, where, 2, &tmp32);
- tmp16 = (u16) tmp32;
- *value = tmp16;
- sabre_read_pci_cfg(bus, devfn, where + 2, 2, &tmp32);
- tmp16 = (u16) tmp32;
- *value |= tmp16 << 16;
- break;
- }
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int __sabre_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
-
- addr = sabre_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- if (__sabre_out_of_range(pbm, bus, devfn))
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- pci_config_write8((u8 *) addr, value);
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_write_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_write16((u16 *) addr, value);
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_write_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_write32(addr, value);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sabre_write_pci_cfg(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct pci_pbm_info *pbm = bus->sysdata;
-
- if (bus == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_write_pci_cfg(bus, devfn, where,
- size, value);
-
- if (bus->number)
- return __sabre_write_pci_cfg(bus, devfn, where, size, value);
-
- if (sabre_out_of_range(devfn))
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- if (where < 8) {
- u32 tmp32;
- u16 tmp16;
-
- __sabre_read_pci_cfg(bus, devfn, where & ~1, 2, &tmp32);
- tmp16 = (u16) tmp32;
- if (where & 1) {
- value &= 0x00ff;
- value |= tmp16 << 8;
- } else {
- value &= 0xff00;
- value |= tmp16;
- }
- tmp32 = (u32) tmp16;
- return __sabre_write_pci_cfg(bus, devfn, where & ~1, 2, tmp32);
- } else
- return __sabre_write_pci_cfg(bus, devfn, where, 1, value);
- break;
- case 2:
- if (where < 8)
- return __sabre_write_pci_cfg(bus, devfn, where, 2, value);
- else {
- __sabre_write_pci_cfg(bus, devfn, where, 1, value & 0xff);
- __sabre_write_pci_cfg(bus, devfn, where + 1, 1, value >> 8);
- }
- break;
- case 4:
- sabre_write_pci_cfg(bus, devfn, where, 2, value & 0xffff);
- sabre_write_pci_cfg(bus, devfn, where + 2, 2, value >> 16);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops sabre_ops = {
- .read = sabre_read_pci_cfg,
- .write = sabre_write_pci_cfg,
-};
-
/* SABRE error handling support. */
static void sabre_check_iommu_error(struct pci_pbm_info *pbm,
unsigned long afsr,
@@ -1010,7 +725,8 @@
printk("%s: SABRE PCI Bus Module\n", pbm->name);
pbm->scan_bus = sabre_scan_bus;
- pbm->pci_ops = &sabre_ops;
+ pbm->pci_ops = &sun4u_pci_ops;
+ pbm->config_space_reg_bits = 8;
pbm->index = pci_num_pbms++;
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index e375d72..ae76898 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -104,125 +104,6 @@
SCHIZO_CONFIG_ENCODE(bus, devfn, where));
}
-/* Just make sure the bus number is in range. */
-static int schizo_out_of_range(struct pci_pbm_info *pbm,
- unsigned char bus,
- unsigned char devfn)
-{
- if (bus < pbm->pci_first_busno ||
- bus > pbm->pci_last_busno)
- return 1;
- return 0;
-}
-
-/* SCHIZO PCI configuration space accessors. */
-
-static int schizo_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 *value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
- u16 tmp16;
- u8 tmp8;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
- size, value);
- switch (size) {
- case 1:
- *value = 0xff;
- break;
- case 2:
- *value = 0xffff;
- break;
- case 4:
- *value = 0xffffffff;
- break;
- }
-
- addr = schizo_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- if (schizo_out_of_range(pbm, bus, devfn))
- return PCIBIOS_SUCCESSFUL;
- switch (size) {
- case 1:
- pci_config_read8((u8 *)addr, &tmp8);
- *value = tmp8;
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_read_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read16((u16 *)addr, &tmp16);
- *value = tmp16;
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_read_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_read32(addr, value);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int schizo_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- unsigned char bus = bus_dev->number;
- u32 *addr;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
- size, value);
- addr = schizo_pci_config_mkaddr(pbm, bus, devfn, where);
- if (!addr)
- return PCIBIOS_SUCCESSFUL;
-
- if (schizo_out_of_range(pbm, bus, devfn))
- return PCIBIOS_SUCCESSFUL;
-
- switch (size) {
- case 1:
- pci_config_write8((u8 *)addr, value);
- break;
-
- case 2:
- if (where & 0x01) {
- printk("pci_write_config_word: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
- pci_config_write16((u16 *)addr, value);
- break;
-
- case 4:
- if (where & 0x03) {
- printk("pci_write_config_dword: misaligned reg [%x]\n",
- where);
- return PCIBIOS_SUCCESSFUL;
- }
-
- pci_config_write32(addr, value);
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops schizo_ops = {
- .read = schizo_read_pci_cfg,
- .write = schizo_write_pci_cfg,
-};
-
/* SCHIZO error handling support. */
enum schizo_error_type {
UE_ERR, CE_ERR, PCI_ERR, SAFARI_ERR
@@ -1494,7 +1375,8 @@
pci_pbm_root = pbm;
pbm->scan_bus = schizo_scan_bus;
- pbm->pci_ops = &schizo_ops;
+ pbm->pci_ops = &sun4u_pci_ops;
+ pbm->config_space_reg_bits = 8;
pbm->index = pci_num_pbms++;
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index 0c76a88..044e8ec 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -593,89 +593,6 @@
.dma_sync_sg_for_cpu = pci_4v_dma_sync_sg_for_cpu,
};
-static inline int pci_sun4v_out_of_range(struct pci_pbm_info *pbm, unsigned int bus, unsigned int device, unsigned int func)
-{
- if (bus < pbm->pci_first_busno ||
- bus > pbm->pci_last_busno)
- return 1;
- return 0;
-}
-
-static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 *value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- u32 devhandle = pbm->devhandle;
- unsigned int bus = bus_dev->number;
- unsigned int device = PCI_SLOT(devfn);
- unsigned int func = PCI_FUNC(devfn);
- unsigned long ret;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
- size, value);
- if (pci_sun4v_out_of_range(pbm, bus, device, func)) {
- ret = ~0UL;
- } else {
- ret = pci_sun4v_config_get(devhandle,
- HV_PCI_DEVICE_BUILD(bus, device, func),
- where, size);
-#if 0
- printk("rcfg: [%x:%x:%x:%d]=[%lx]\n",
- devhandle, HV_PCI_DEVICE_BUILD(bus, device, func),
- where, size, ret);
-#endif
- }
- switch (size) {
- case 1:
- *value = ret & 0xff;
- break;
- case 2:
- *value = ret & 0xffff;
- break;
- case 4:
- *value = ret & 0xffffffff;
- break;
- };
-
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
- int where, int size, u32 value)
-{
- struct pci_pbm_info *pbm = bus_dev->sysdata;
- u32 devhandle = pbm->devhandle;
- unsigned int bus = bus_dev->number;
- unsigned int device = PCI_SLOT(devfn);
- unsigned int func = PCI_FUNC(devfn);
- unsigned long ret;
-
- if (bus_dev == pbm->pci_bus && devfn == 0x00)
- return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
- size, value);
- if (pci_sun4v_out_of_range(pbm, bus, device, func)) {
- /* Do nothing. */
- } else {
- ret = pci_sun4v_config_put(devhandle,
- HV_PCI_DEVICE_BUILD(bus, device, func),
- where, size, value);
-#if 0
- printk("wcfg: [%x:%x:%x:%d] v[%x] == [%lx]\n",
- devhandle, HV_PCI_DEVICE_BUILD(bus, device, func),
- where, size, value, ret);
-#endif
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_sun4v_ops = {
- .read = pci_sun4v_read_pci_cfg,
- .write = pci_sun4v_write_pci_cfg,
-};
-
-
static void pci_sun4v_scan_bus(struct pci_pbm_info *pbm)
{
struct property *prop;
@@ -814,7 +731,7 @@
u64 msi_address;
- /* The format of this value is message type dependant.
+ /* The format of this value is message type dependent.
* For MSI bits 15:0 are the data from the MSI packet.
* For MSI-X bits 31:0 are the data from the MSI packet.
* For MSG, the message code and message routing code where:
@@ -1238,7 +1155,8 @@
pci_pbm_root = pbm;
pbm->scan_bus = pci_sun4v_scan_bus;
- pbm->pci_ops = &pci_sun4v_ops;
+ pbm->pci_ops = &sun4v_pci_ops;
+ pbm->config_space_reg_bits = 12;
pbm->index = pci_num_pbms++;
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 8e3c6e4..952762b 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -677,7 +677,7 @@
* NOTE! Only a kernel-only process(ie the swapper or direct descendants
* who haven't done an "execve()") should use this: it will work within
* a system call from a "real" process, but the process memory space will
- * not be free'd until both the parent and the child have exited.
+ * not be freed until both the parent and the child have exited.
*/
pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index c54d4d8..02830e4 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -899,7 +899,7 @@
/* The interrupt map registers do not have an INO field
* like other chips do. They return zero in the INO
* field, and the interrupt controller number is controlled
- * in bits 6 thru 9. So in order for build_irq() to get
+ * in bits 6 to 9. So in order for build_irq() to get
* the INO right we pass it in as part of the fixup
* which will get added to the map register zero value
* read by build_irq().
@@ -1636,10 +1636,21 @@
static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
{
+ struct device_node *ret = NULL, *prev_sibling = NULL;
struct device_node *dp;
- dp = create_node(node, parent);
- if (dp) {
+ while (1) {
+ dp = create_node(node, parent);
+ if (!dp)
+ break;
+
+ if (prev_sibling)
+ prev_sibling->sibling = dp;
+
+ if (!ret)
+ ret = dp;
+ prev_sibling = dp;
+
*(*nextp) = dp;
*nextp = &dp->allnext;
@@ -1648,10 +1659,10 @@
dp->child = build_tree(dp, prom_getchild(node), nextp);
- dp->sibling = build_tree(parent, prom_getsibling(node), nextp);
+ node = prom_getsibling(node);
}
- return dp;
+ return ret;
}
void __init prom_build_devicetree(void)
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 8087d67..24fdf1d 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -561,6 +561,9 @@
unsigned long flags, status;
int cnt, retries, this_cpu, prev_sent, i;
+ if (cpus_empty(mask))
+ return;
+
/* We have to do this whole thing with interrupts fully disabled.
* Otherwise if we send an xcall from interrupt context it will
* corrupt both our mondo block and cpu list state.
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 5fe7f9a..8765e32 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -81,7 +81,7 @@
.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
-/*310*/ .word compat_sys_utimensat
+/*310*/ .word compat_sys_utimensat, compat_sys_signalfd, compat_sys_timerfd, sys_eventfd
#endif /* CONFIG_COMPAT */
@@ -153,7 +153,7 @@
.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
/*300*/ .word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
-/*310*/ .word sys_utimensat
+/*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd, sys_eventfd
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -271,6 +271,7 @@
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys
-/*310*/ .long sunos_nosys
+/*310*/ .word sunos_nosys, sunos_nosys, sunos_nosys
+ .word sunos_nosys
#endif
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index 259063f..6b9a06e 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -55,6 +55,7 @@
void __iomem *mstk48t02_regs = NULL;
#ifdef CONFIG_PCI
unsigned long ds1287_regs = 0UL;
+static void __iomem *bq4802_regs;
#endif
static void __iomem *mstk48t08_regs;
@@ -565,12 +566,14 @@
void __iomem *mregs = mstk48t02_regs;
#ifdef CONFIG_PCI
unsigned long dregs = ds1287_regs;
+ void __iomem *bregs = bq4802_regs;
#else
unsigned long dregs = 0UL;
+ void __iomem *bregs = 0UL;
#endif
u8 tmp;
- if (!mregs && !dregs) {
+ if (!mregs && !dregs && !bregs) {
prom_printf("Something wrong, clock regs not mapped yet.\n");
prom_halt();
}
@@ -589,6 +592,33 @@
day = MSTK_REG_DOM(mregs);
mon = MSTK_REG_MONTH(mregs);
year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
+ } else if (bregs) {
+ unsigned char val = readb(bregs + 0x0e);
+ unsigned int century;
+
+ /* BQ4802 RTC chip. */
+
+ writeb(val | 0x08, bregs + 0x0e);
+
+ sec = readb(bregs + 0x00);
+ min = readb(bregs + 0x02);
+ hour = readb(bregs + 0x04);
+ day = readb(bregs + 0x06);
+ mon = readb(bregs + 0x09);
+ year = readb(bregs + 0x0a);
+ century = readb(bregs + 0x0f);
+
+ writeb(val, bregs + 0x0e);
+
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+ BCD_TO_BIN(century);
+
+ year += (century * 100);
} else {
/* Dallas 12887 RTC chip. */
@@ -712,7 +742,8 @@
strcmp(model, "m5819") &&
strcmp(model, "m5819p") &&
strcmp(model, "m5823") &&
- strcmp(model, "ds1287"))
+ strcmp(model, "ds1287") &&
+ strcmp(model, "bq4802"))
return 0;
return 1;
@@ -722,9 +753,13 @@
{
struct device_node *dp = op->node;
const char *model = of_get_property(dp, "model", NULL);
+ const char *compat = of_get_property(dp, "compatible", NULL);
unsigned long size, flags;
void __iomem *regs;
+ if (!model)
+ model = compat;
+
if (!model || !clock_model_matches(model))
return -ENODEV;
@@ -746,6 +781,8 @@
!strcmp(model, "m5819p") ||
!strcmp(model, "m5823")) {
ds1287_regs = (unsigned long) regs;
+ } else if (!strcmp(model, "bq4802")) {
+ bq4802_regs = regs;
} else
#endif
if (model[5] == '0' && model[6] == '2') {
@@ -1070,8 +1107,10 @@
void __iomem *mregs = mstk48t02_regs;
#ifdef CONFIG_PCI
unsigned long dregs = ds1287_regs;
+ void __iomem *bregs = bq4802_regs;
#else
unsigned long dregs = 0UL;
+ void __iomem *bregs = 0UL;
#endif
unsigned long flags;
u8 tmp;
@@ -1080,7 +1119,7 @@
* Not having a register set can lead to trouble.
* Also starfire doesn't have a tod clock.
*/
- if (!mregs && !dregs)
+ if (!mregs && !dregs & !bregs)
return -1;
if (mregs) {
@@ -1129,6 +1168,37 @@
return -1;
}
+ } else if (bregs) {
+ int retval = 0;
+ unsigned char val = readb(bregs + 0x0e);
+
+ /* BQ4802 RTC chip. */
+
+ writeb(val | 0x08, bregs + 0x0e);
+
+ chip_minutes = readb(bregs + 0x02);
+ BCD_TO_BIN(chip_minutes);
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - chip_minutes) + 15)/30) & 1)
+ real_minutes += 30;
+ real_minutes %= 60;
+
+ if (abs(real_minutes - chip_minutes) < 30) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ writeb(real_seconds, bregs + 0x00);
+ writeb(real_minutes, bregs + 0x02);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ chip_minutes, real_minutes);
+ retval = -1;
+ }
+
+ writeb(val, bregs + 0x0e);
+
+ return retval;
} else {
int retval = 0;
unsigned char save_control, save_freq_select;
@@ -1259,38 +1329,152 @@
/* Both Starfire and SUN4V give us seconds since Jan 1st, 1970,
* aka Unix time. So we have to convert to/from rtc_time.
*/
-static inline void mini_get_rtc_time(struct rtc_time *time)
+static void starfire_get_rtc_time(struct rtc_time *time)
{
- unsigned long flags;
- u32 seconds;
-
- spin_lock_irqsave(&rtc_lock, flags);
- seconds = 0;
- if (this_is_starfire)
- seconds = starfire_get_time();
- else if (tlb_type == hypervisor)
- seconds = hypervisor_get_time();
- spin_unlock_irqrestore(&rtc_lock, flags);
+ u32 seconds = starfire_get_time();
to_tm(seconds, time);
time->tm_year -= 1900;
time->tm_mon -= 1;
}
-static inline int mini_set_rtc_time(struct rtc_time *time)
+static int starfire_set_rtc_time(struct rtc_time *time)
{
u32 seconds = mktime(time->tm_year + 1900, time->tm_mon + 1,
time->tm_mday, time->tm_hour,
time->tm_min, time->tm_sec);
+
+ return starfire_set_time(seconds);
+}
+
+static void hypervisor_get_rtc_time(struct rtc_time *time)
+{
+ u32 seconds = hypervisor_get_time();
+
+ to_tm(seconds, time);
+ time->tm_year -= 1900;
+ time->tm_mon -= 1;
+}
+
+static int hypervisor_set_rtc_time(struct rtc_time *time)
+{
+ u32 seconds = mktime(time->tm_year + 1900, time->tm_mon + 1,
+ time->tm_mday, time->tm_hour,
+ time->tm_min, time->tm_sec);
+
+ return hypervisor_set_time(seconds);
+}
+
+static void bq4802_get_rtc_time(struct rtc_time *time)
+{
+ unsigned char val = readb(bq4802_regs + 0x0e);
+ unsigned int century;
+
+ writeb(val | 0x08, bq4802_regs + 0x0e);
+
+ time->tm_sec = readb(bq4802_regs + 0x00);
+ time->tm_min = readb(bq4802_regs + 0x02);
+ time->tm_hour = readb(bq4802_regs + 0x04);
+ time->tm_mday = readb(bq4802_regs + 0x06);
+ time->tm_mon = readb(bq4802_regs + 0x09);
+ time->tm_year = readb(bq4802_regs + 0x0a);
+ time->tm_wday = readb(bq4802_regs + 0x08);
+ century = readb(bq4802_regs + 0x0f);
+
+ writeb(val, bq4802_regs + 0x0e);
+
+ BCD_TO_BIN(time->tm_sec);
+ BCD_TO_BIN(time->tm_min);
+ BCD_TO_BIN(time->tm_hour);
+ BCD_TO_BIN(time->tm_mday);
+ BCD_TO_BIN(time->tm_mon);
+ BCD_TO_BIN(time->tm_year);
+ BCD_TO_BIN(time->tm_wday);
+ BCD_TO_BIN(century);
+
+ time->tm_year += (century * 100);
+ time->tm_year -= 1900;
+
+ time->tm_mon--;
+}
+
+static int bq4802_set_rtc_time(struct rtc_time *time)
+{
+ unsigned char val = readb(bq4802_regs + 0x0e);
+ unsigned char sec, min, hrs, day, mon, yrs, century;
+ unsigned int year;
+
+ year = time->tm_year + 1900;
+ century = year / 100;
+ yrs = year % 100;
+
+ mon = time->tm_mon + 1; /* tm_mon starts at zero */
+ day = time->tm_mday;
+ hrs = time->tm_hour;
+ min = time->tm_min;
+ sec = time->tm_sec;
+
+ BIN_TO_BCD(sec);
+ BIN_TO_BCD(min);
+ BIN_TO_BCD(hrs);
+ BIN_TO_BCD(day);
+ BIN_TO_BCD(mon);
+ BIN_TO_BCD(yrs);
+ BIN_TO_BCD(century);
+
+ writeb(val | 0x08, bq4802_regs + 0x0e);
+
+ writeb(sec, bq4802_regs + 0x00);
+ writeb(min, bq4802_regs + 0x02);
+ writeb(hrs, bq4802_regs + 0x04);
+ writeb(day, bq4802_regs + 0x06);
+ writeb(mon, bq4802_regs + 0x09);
+ writeb(yrs, bq4802_regs + 0x0a);
+ writeb(century, bq4802_regs + 0x0f);
+
+ writeb(val, bq4802_regs + 0x0e);
+
+ return 0;
+}
+
+struct mini_rtc_ops {
+ void (*get_rtc_time)(struct rtc_time *);
+ int (*set_rtc_time)(struct rtc_time *);
+};
+
+static struct mini_rtc_ops starfire_rtc_ops = {
+ .get_rtc_time = starfire_get_rtc_time,
+ .set_rtc_time = starfire_set_rtc_time,
+};
+
+static struct mini_rtc_ops hypervisor_rtc_ops = {
+ .get_rtc_time = hypervisor_get_rtc_time,
+ .set_rtc_time = hypervisor_set_rtc_time,
+};
+
+static struct mini_rtc_ops bq4802_rtc_ops = {
+ .get_rtc_time = bq4802_get_rtc_time,
+ .set_rtc_time = bq4802_set_rtc_time,
+};
+
+static struct mini_rtc_ops *mini_rtc_ops;
+
+static inline void mini_get_rtc_time(struct rtc_time *time)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ mini_rtc_ops->get_rtc_time(time);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+}
+
+static inline int mini_set_rtc_time(struct rtc_time *time)
+{
unsigned long flags;
int err;
spin_lock_irqsave(&rtc_lock, flags);
- err = -ENODEV;
- if (this_is_starfire)
- err = starfire_set_time(seconds);
- else if (tlb_type == hypervisor)
- err = hypervisor_set_time(seconds);
+ err = mini_rtc_ops->set_rtc_time(time);
spin_unlock_irqrestore(&rtc_lock, flags);
return err;
@@ -1391,7 +1575,13 @@
{
int retval;
- if (tlb_type != hypervisor && !this_is_starfire)
+ if (tlb_type == hypervisor)
+ mini_rtc_ops = &hypervisor_rtc_ops;
+ else if (this_is_starfire)
+ mini_rtc_ops = &starfire_rtc_ops;
+ else if (bq4802_regs)
+ mini_rtc_ops = &bq4802_rtc_ops;
+ else
return -ENODEV;
printk(KERN_INFO "Mini RTC Driver\n");
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index d7004ea..6e5b01d 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1008,7 +1008,7 @@
if (initrd_start) {
size = initrd_end - initrd_start;
- /* Resert the initrd image area. */
+ /* Reserve the initrd image area. */
#ifdef CONFIG_DEBUG_BOOTMEM
prom_printf("reserve_bootmem(initrd): base[%llx] size[%lx]\n",
initrd_start, initrd_end);
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index b9c0f30..c504312 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -277,7 +277,8 @@
config KERNEL_STACK_ORDER
int "Kernel stack size order"
- default 2
+ default 1 if 64BIT
+ default 0 if !64BIT
help
This option determines the size of UML kernel stacks. They will
be 1 << order pages. The default is OK unless you're running Valgrind
diff --git a/arch/um/defconfig b/arch/um/defconfig
index f938fa8..a54d0ef 100644
--- a/arch/um/defconfig
+++ b/arch/um/defconfig
@@ -86,7 +86,7 @@
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_NEST_LEVEL=0
# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_STACK_ORDER=2
+CONFIG_KERNEL_STACK_ORDER=0
CONFIG_UML_REAL_TIME_CLOCK=y
#
diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h
index 5593a80..541f4a8 100644
--- a/arch/um/include/common-offsets.h
+++ b/arch/um/include/common-offsets.h
@@ -28,3 +28,5 @@
/* For crypto assembler code. */
DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
+
+DEFINE(UM_THREAD_SIZE, THREAD_SIZE);
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index 50a49691..8d7f7c1 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -117,4 +117,7 @@
extern void copy_sc(union uml_pt_regs *regs, void *from);
+unsigned long to_irq_stack(int sig, unsigned long *mask_out);
+unsigned long from_irq_stack(int nested);
+
#endif
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 688d181..4d9fb26 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -272,7 +272,6 @@
/* util.c */
extern void stack_protections(unsigned long address);
-extern void task_protections(unsigned long address);
extern int raw(int fd);
extern void setup_machinename(char *machine_out);
extern void setup_hostinfo(char *buf, int len);
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index e36f92b..87a4e44 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -97,6 +97,8 @@
.data : {
. = ALIGN(KERNEL_STACK_SIZE); /* init_task */
*(.data.init_task)
+ . = ALIGN(KERNEL_STACK_SIZE);
+ *(.data.init_irqstack)
*(.data .data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
}
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index cda91aa..d4f1d1a 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -1,5 +1,5 @@
-/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,intel.linux}.com)
* Licensed under the GPL
*/
@@ -33,28 +33,20 @@
/*
* Initial thread structure.
*
- * We need to make sure that this is 16384-byte aligned due to the
+ * We need to make sure that this is aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
-__attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+union thread_union cpu0_irqstack
+ __attribute__((__section__(".data.init_irqstack"))) =
+ { INIT_THREAD_INFO(init_task) };
void unprotect_stack(unsigned long stack)
{
- os_protect_memory((void *) stack, (1 << CONFIG_KERNEL_STACK_ORDER) * PAGE_SIZE,
- 1, 1, 0);
+ os_protect_memory((void *) stack, THREAD_SIZE, 1, 1, 0);
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 8f2ed36..dba04d8 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
* Derived (i.e. mostly copied) from arch/i386/kernel/irq.c:
@@ -32,6 +32,7 @@
#include "sigio.h"
#include "um_malloc.h"
#include "misc_constants.h"
+#include "as-layout.h"
/*
* Generic, controller-independent functions:
@@ -53,7 +54,7 @@
if (i < NR_IRQS) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
- if (!action)
+ if (!action)
goto skip;
seq_printf(p, "%3d: ",i);
#ifndef CONFIG_SMP
@@ -468,3 +469,113 @@
out:
return err;
}
+
+/*
+ * IRQ stack entry and exit:
+ *
+ * Unlike i386, UML doesn't receive IRQs on the normal kernel stack
+ * and switch over to the IRQ stack after some preparation. We use
+ * sigaltstack to receive signals on a separate stack from the start.
+ * These two functions make sure the rest of the kernel won't be too
+ * upset by being on a different stack. The IRQ stack has a
+ * thread_info structure at the bottom so that current et al continue
+ * to work.
+ *
+ * to_irq_stack copies the current task's thread_info to the IRQ stack
+ * thread_info and sets the tasks's stack to point to the IRQ stack.
+ *
+ * from_irq_stack copies the thread_info struct back (flags may have
+ * been modified) and resets the task's stack pointer.
+ *
+ * Tricky bits -
+ *
+ * What happens when two signals race each other? UML doesn't block
+ * signals with sigprocmask, SA_DEFER, or sa_mask, so a second signal
+ * could arrive while a previous one is still setting up the
+ * thread_info.
+ *
+ * There are three cases -
+ * The first interrupt on the stack - sets up the thread_info and
+ * handles the interrupt
+ * A nested interrupt interrupting the copying of the thread_info -
+ * can't handle the interrupt, as the stack is in an unknown state
+ * A nested interrupt not interrupting the copying of the
+ * thread_info - doesn't do any setup, just handles the interrupt
+ *
+ * The first job is to figure out whether we interrupted stack setup.
+ * This is done by xchging the signal mask with thread_info->pending.
+ * If the value that comes back is zero, then there is no setup in
+ * progress, and the interrupt can be handled. If the value is
+ * non-zero, then there is stack setup in progress. In order to have
+ * the interrupt handled, we leave our signal in the mask, and it will
+ * be handled by the upper handler after it has set up the stack.
+ *
+ * Next is to figure out whether we are the outer handler or a nested
+ * one. As part of setting up the stack, thread_info->real_thread is
+ * set to non-NULL (and is reset to NULL on exit). This is the
+ * nesting indicator. If it is non-NULL, then the stack is already
+ * set up and the handler can run.
+ */
+
+static unsigned long pending_mask;
+
+unsigned long to_irq_stack(int sig, unsigned long *mask_out)
+{
+ struct thread_info *ti;
+ unsigned long mask, old;
+ int nested;
+
+ mask = xchg(&pending_mask, 1 << sig);
+ if(mask != 0){
+ /* If any interrupts come in at this point, we want to
+ * make sure that their bits aren't lost by our
+ * putting our bit in. So, this loop accumulates bits
+ * until xchg returns the same value that we put in.
+ * When that happens, there were no new interrupts,
+ * and pending_mask contains a bit for each interrupt
+ * that came in.
+ */
+ old = 1 << sig;
+ do {
+ old |= mask;
+ mask = xchg(&pending_mask, old);
+ } while(mask != old);
+ return 1;
+ }
+
+ ti = current_thread_info();
+ nested = (ti->real_thread != NULL);
+ if(!nested){
+ struct task_struct *task;
+ struct thread_info *tti;
+
+ task = cpu_tasks[ti->cpu].task;
+ tti = task_thread_info(task);
+ *ti = *tti;
+ ti->real_thread = tti;
+ task->stack = ti;
+ }
+
+ mask = xchg(&pending_mask, 0);
+ *mask_out |= mask | nested;
+ return 0;
+}
+
+unsigned long from_irq_stack(int nested)
+{
+ struct thread_info *ti, *to;
+ unsigned long mask;
+
+ ti = current_thread_info();
+
+ pending_mask = 1;
+
+ to = ti->real_thread;
+ current->stack = to;
+ ti->real_thread = NULL;
+ *to = *ti;
+
+ mask = xchg(&pending_mask, 0);
+ return mask & ~1;
+}
+
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
index a96ae1a..2a69a7c 100644
--- a/arch/um/kernel/skas/process.c
+++ b/arch/um/kernel/skas/process.c
@@ -163,8 +163,12 @@
extern int userspace_pid[];
+extern char cpu0_irqstack[];
+
int start_uml_skas(void)
{
+ stack_protections((unsigned long) &cpu0_irqstack);
+ set_sigstack(cpu0_irqstack, THREAD_SIZE);
if(proc_mm)
userspace_pid[0] = start_userspace(0);
diff --git a/arch/um/kernel/tt/exec_kern.c b/arch/um/kernel/tt/exec_kern.c
index 98e2174..40126cb 100644
--- a/arch/um/kernel/tt/exec_kern.c
+++ b/arch/um/kernel/tt/exec_kern.c
@@ -57,7 +57,7 @@
enable_timer();
free_page(stack);
protect_memory(uml_reserved, high_physmem - uml_reserved, 1, 1, 0, 1);
- task_protections((unsigned long) current_thread);
+ stack_protections((unsigned long) current_thread);
force_flush_all();
unblock_signals();
}
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index c631303..74347ad 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -209,7 +209,7 @@
if(current->mm != current->parent->mm)
protect_memory(uml_reserved, high_physmem - uml_reserved, 1,
1, 0, 1);
- task_protections((unsigned long) current_thread);
+ stack_protections((unsigned long) current_thread);
free_page(current->thread.temp_stack);
local_irq_disable();
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 1cf954a..ecc458f 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -459,7 +459,7 @@
uml_postsetup();
- task_protections((unsigned long) &init_thread_info);
+ stack_protections((unsigned long) &init_thread_info);
os_flush_stdout();
return CHOOSE_MODE(start_uml_tt(), start_uml_skas());
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index f630127..bc59f97 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -59,6 +59,8 @@
{
. = ALIGN(KERNEL_STACK_SIZE); /* init_task */
*(.data.init_task)
+ . = ALIGN(KERNEL_STACK_SIZE);
+ *(.data.init_irqstack)
*(.data)
*(.gnu.linkonce.d*)
CONSTRUCTORS
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 48d4934..18e5c8b 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -61,15 +61,19 @@
static void real_alarm_handler(int sig, struct sigcontext *sc)
{
+ union uml_pt_regs regs;
+
if(sig == SIGALRM)
switch_timers(0);
- CHOOSE_MODE_PROC(sig_handler_common_tt, sig_handler_common_skas,
- sig, sc);
+ if(sc != NULL)
+ copy_sc(®s, sc);
+ regs.skas.is_user = 0;
+ unblock_signals();
+ timer_handler(sig, ®s);
if(sig == SIGALRM)
switch_timers(1);
-
}
void alarm_handler(int sig, struct sigcontext *sc)
@@ -113,6 +117,46 @@
void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+void handle_signal(int sig, struct sigcontext *sc)
+{
+ unsigned long pending = 0;
+
+ do {
+ int nested, bail;
+
+ /*
+ * pending comes back with one bit set for each
+ * interrupt that arrived while setting up the stack,
+ * plus a bit for this interrupt, plus the zero bit is
+ * set if this is a nested interrupt.
+ * If bail is true, then we interrupted another
+ * handler setting up the stack. In this case, we
+ * have to return, and the upper handler will deal
+ * with this interrupt.
+ */
+ bail = to_irq_stack(sig, &pending);
+ if(bail)
+ return;
+
+ nested = pending & 1;
+ pending &= ~1;
+
+ while((sig = ffs(pending)) != 0){
+ sig--;
+ pending &= ~(1 << sig);
+ (*handlers[sig])(sig, sc);
+ }
+
+ /* Again, pending comes back with a mask of signals
+ * that arrived while tearing down the stack. If this
+ * is non-zero, we just go back, set up the stack
+ * again, and handle the new interrupts.
+ */
+ if(!nested)
+ pending = from_irq_stack(nested);
+ } while(pending);
+}
+
extern void hard_handler(int sig);
void set_handler(int sig, void (*handler)(int), int flags, ...)
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 6a0e466..f9d2f85 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -288,7 +288,8 @@
void userspace(union uml_pt_regs *regs)
{
int err, status, op, pid = userspace_pid[0];
- int local_using_sysemu; /*To prevent races if using_sysemu changes under us.*/
+ /* To prevent races if using_sysemu changes under us.*/
+ int local_using_sysemu;
while(1){
restore_registers(pid, regs);
@@ -296,7 +297,8 @@
/* Now we set local_using_sysemu to be used for one loop */
local_using_sysemu = get_using_sysemu();
- op = SELECT_PTRACE_OPERATION(local_using_sysemu, singlestepping(NULL));
+ op = SELECT_PTRACE_OPERATION(local_using_sysemu,
+ singlestepping(NULL));
err = ptrace(op, pid, 0, 0);
if(err)
@@ -490,8 +492,8 @@
void new_thread(void *stack, jmp_buf *buf, void (*handler)(void))
{
(*buf)[0].JB_IP = (unsigned long) handler;
- (*buf)[0].JB_SP = (unsigned long) stack +
- (PAGE_SIZE << UML_CONFIG_KERNEL_STACK_ORDER) - sizeof(void *);
+ (*buf)[0].JB_SP = (unsigned long) stack + UM_THREAD_SIZE -
+ sizeof(void *);
}
#define INIT_JMP_NEW_THREAD 0
@@ -533,8 +535,7 @@
case INIT_JMP_NEW_THREAD:
(*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler;
(*switch_buf)[0].JB_SP = (unsigned long) stack +
- (PAGE_SIZE << UML_CONFIG_KERNEL_STACK_ORDER) -
- sizeof(void *);
+ UM_THREAD_SIZE - sizeof(void *);
break;
case INIT_JMP_CALLBACK:
(*cb_proc)(cb_arg);
diff --git a/arch/um/os-Linux/sys-i386/signal.c b/arch/um/os-Linux/sys-i386/signal.c
index 0d3eae5..f311609 100644
--- a/arch/um/os-Linux/sys-i386/signal.c
+++ b/arch/um/os-Linux/sys-i386/signal.c
@@ -1,15 +1,13 @@
/*
- * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2006 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include <signal.h>
-extern void (*handlers[])(int sig, struct sigcontext *sc);
+extern void handle_signal(int sig, struct sigcontext *sc);
void hard_handler(int sig)
{
- struct sigcontext *sc = (struct sigcontext *) (&sig + 1);
-
- (*handlers[sig])(sig, sc);
+ handle_signal(sig, (struct sigcontext *) (&sig + 1));
}
diff --git a/arch/um/os-Linux/sys-x86_64/signal.c b/arch/um/os-Linux/sys-x86_64/signal.c
index 3f369e5..82a3888 100644
--- a/arch/um/os-Linux/sys-x86_64/signal.c
+++ b/arch/um/os-Linux/sys-x86_64/signal.c
@@ -1,16 +1,16 @@
/*
- * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2006 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include <signal.h>
-extern void (*handlers[])(int sig, struct sigcontext *sc);
+extern void handle_signal(int sig, struct sigcontext *sc);
void hard_handler(int sig)
{
struct ucontext *uc;
asm("movq %%rdx, %0" : "=r" (uc));
- (*handlers[sig])(sig, (struct sigcontext *) &uc->uc_mcontext);
+ handle_signal(sig, (struct sigcontext *) &uc->uc_mcontext);
}
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index c307a89..7cbcf48 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -33,25 +33,8 @@
void stack_protections(unsigned long address)
{
- int prot = PROT_READ | PROT_WRITE | PROT_EXEC;
-
- if(mprotect((void *) address, UM_KERN_PAGE_SIZE, prot) < 0)
- panic("protecting stack failed, errno = %d", errno);
-}
-
-void task_protections(unsigned long address)
-{
- unsigned long guard = address + UM_KERN_PAGE_SIZE;
- unsigned long stack = guard + UM_KERN_PAGE_SIZE;
- int prot = 0, pages;
-
-#ifdef notdef
- if(mprotect((void *) stack, UM_KERN_PAGE_SIZE, prot) < 0)
- panic("protecting guard page failed, errno = %d", errno);
-#endif
- pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER) - 2;
- prot = PROT_READ | PROT_WRITE | PROT_EXEC;
- if(mprotect((void *) stack, pages * UM_KERN_PAGE_SIZE, prot) < 0)
+ if(mprotect((void *) address, UM_THREAD_SIZE,
+ PROT_READ | PROT_WRITE | PROT_EXEC) < 0)
panic("protecting stack failed, errno = %d", errno);
}
@@ -72,7 +55,7 @@
/* XXX tcsetattr could have applied only some changes
* (and cfmakeraw() is a set of changes) */
- return(0);
+ return 0;
}
void setup_machinename(char *machine_out)
diff --git a/arch/x86_64/ia32/audit.c b/arch/x86_64/ia32/audit.c
index 92d7d0c..8850fe4 100644
--- a/arch/x86_64/ia32/audit.c
+++ b/arch/x86_64/ia32/audit.c
@@ -20,6 +20,11 @@
~0U
};
+unsigned ia32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
int ia32_classify_syscall(unsigned syscall)
{
switch(syscall) {
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S
index f210683..21868f9 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86_64/ia32/ia32entry.S
@@ -716,4 +716,7 @@
.quad sys_getcpu
.quad sys_epoll_pwait
.quad compat_sys_utimensat /* 320 */
-ia32_syscall_end:
+ .quad compat_sys_signalfd
+ .quad compat_sys_timerfd
+ .quad sys_eventfd
+ia32_syscall_end:
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index a52af58..a3d450d 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -86,7 +86,7 @@
printk("Aperture too small (%d MB)\n", aper_size>>20);
return 0;
}
- if (aper_base + aper_size >= 0xffffffff) {
+ if (aper_base + aper_size > 0x100000000UL) {
printk("Aperture beyond 4GB. Ignoring.\n");
return 0;
}
diff --git a/arch/x86_64/kernel/audit.c b/arch/x86_64/kernel/audit.c
index 21f3338..06d3e5a 100644
--- a/arch/x86_64/kernel/audit.c
+++ b/arch/x86_64/kernel/audit.c
@@ -23,6 +23,20 @@
~0U
};
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_IA32_EMULATION
+ if (arch == AUDIT_ARCH_I386)
+ return 1;
+#endif
+ return 0;
+}
+
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_IA32_EMULATION
@@ -49,15 +63,18 @@
extern __u32 ia32_write_class[];
extern __u32 ia32_read_class[];
extern __u32 ia32_chattr_class[];
+ extern __u32 ia32_signal_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
return 0;
}
diff --git a/arch/x86_64/kernel/bugs.c b/arch/x86_64/kernel/bugs.c
index 12b585b..c3c6b91 100644
--- a/arch/x86_64/kernel/bugs.c
+++ b/arch/x86_64/kernel/bugs.c
@@ -9,10 +9,12 @@
#include <linux/init.h>
#include <asm/alternative.h>
#include <asm/processor.h>
+#include <asm/mtrr.h>
void __init check_bugs(void)
{
identify_cpu(&boot_cpu_data);
+ mtrr_bp_init();
#if !defined(CONFIG_SMP)
printk("CPU: ");
print_cpu_info(&boot_cpu_data);
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
index 213d90e..6c34bdd 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86_64/kernel/head64.c
@@ -62,13 +62,6 @@
{
int i;
- /*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
- BUILD_BUG_ON(CONFIG_PHYSICAL_START & (__KERNEL_ALIGN - 1));
-
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index 373ef66..ae091cd 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -476,7 +476,7 @@
aper_base <<= 25;
aper_size = (32 * 1024 * 1024) << aper_order;
- if (aper_base + aper_size >= 0xffffffff || !aper_size)
+ if (aper_base + aper_size > 0x100000000UL || !aper_size)
aper_base = 0;
*size = aper_size;
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index db51577..eb6524f 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -891,9 +891,7 @@
#ifdef CONFIG_X86_MCE
mcheck_init(c);
#endif
- if (c == &boot_cpu_data)
- mtrr_bp_init();
- else
+ if (c != &boot_cpu_data)
mtrr_ap_init();
#ifdef CONFIG_NUMA
numa_add_cpu(smp_processor_id());
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 8c2ac41..cb29fb9 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -776,8 +776,6 @@
*/
if (nmi_watchdog_tick(regs,reason))
return;
- if (notify_die(DIE_NMI_POST, "nmi_post", regs, reason, 2, 0)
- == NOTIFY_STOP)
if (!do_nmi_callback(regs,cpu))
unknown_nmi_error(reason, regs);
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 17e1889..74a567a 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3116,7 +3116,7 @@
* bi_sector for remaps as it sees fit. So the values of these fields
* should NOT be depended on after the call to generic_make_request.
*/
-void generic_make_request(struct bio *bio)
+static inline void __generic_make_request(struct bio *bio)
{
request_queue_t *q;
sector_t maxsector;
@@ -3215,6 +3215,57 @@
} while (ret);
}
+/*
+ * We only want one ->make_request_fn to be active at a time,
+ * else stack usage with stacked devices could be a problem.
+ * So use current->bio_{list,tail} to keep a list of requests
+ * submited by a make_request_fn function.
+ * current->bio_tail is also used as a flag to say if
+ * generic_make_request is currently active in this task or not.
+ * If it is NULL, then no make_request is active. If it is non-NULL,
+ * then a make_request is active, and new requests should be added
+ * at the tail
+ */
+void generic_make_request(struct bio *bio)
+{
+ if (current->bio_tail) {
+ /* make_request is active */
+ *(current->bio_tail) = bio;
+ bio->bi_next = NULL;
+ current->bio_tail = &bio->bi_next;
+ return;
+ }
+ /* following loop may be a bit non-obvious, and so deserves some
+ * explanation.
+ * Before entering the loop, bio->bi_next is NULL (as all callers
+ * ensure that) so we have a list with a single bio.
+ * We pretend that we have just taken it off a longer list, so
+ * we assign bio_list to the next (which is NULL) and bio_tail
+ * to &bio_list, thus initialising the bio_list of new bios to be
+ * added. __generic_make_request may indeed add some more bios
+ * through a recursive call to generic_make_request. If it
+ * did, we find a non-NULL value in bio_list and re-enter the loop
+ * from the top. In this case we really did just take the bio
+ * of the top of the list (no pretending) and so fixup bio_list and
+ * bio_tail or bi_next, and call into __generic_make_request again.
+ *
+ * The loop was structured like this to make only one call to
+ * __generic_make_request (which is important as it is large and
+ * inlined) and to keep the structure simple.
+ */
+ BUG_ON(bio->bi_next);
+ do {
+ current->bio_list = bio->bi_next;
+ if (bio->bi_next == NULL)
+ current->bio_tail = ¤t->bio_list;
+ else
+ bio->bi_next = NULL;
+ __generic_make_request(bio);
+ bio = current->bio_list;
+ } while (bio);
+ current->bio_tail = NULL; /* deactivate */
+}
+
EXPORT_SYMBOL(generic_make_request);
/**
diff --git a/drivers/Makefile b/drivers/Makefile
index 26ca903..adad2f3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -36,6 +36,7 @@
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_FUSION) += message/
+obj-$(CONFIG_FIREWIRE) += firewire/
obj-$(CONFIG_IEEE1394) += ieee1394/
obj-y += cdrom/
obj-y += auxdisplay/
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index 1683e5c..1cbe619 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -231,8 +231,10 @@
* Obtain the method mutex if necessary. Do not acquire mutex for a
* recursive call.
*/
- if (acpi_os_get_thread_id() !=
- obj_desc->method.mutex->mutex.owner_thread_id) {
+ if (!walk_state ||
+ !obj_desc->method.mutex->mutex.owner_thread ||
+ (walk_state->thread !=
+ obj_desc->method.mutex->mutex.owner_thread)) {
/*
* Acquire the method mutex. This releases the interpreter if we
* block (and reacquires it before it returns)
@@ -246,14 +248,14 @@
}
/* Update the mutex and walk info and save the original sync_level */
- obj_desc->method.mutex->mutex.owner_thread_id =
- acpi_os_get_thread_id();
if (walk_state) {
obj_desc->method.mutex->mutex.
original_sync_level =
walk_state->thread->current_sync_level;
+ obj_desc->method.mutex->mutex.owner_thread =
+ walk_state->thread;
walk_state->thread->current_sync_level =
obj_desc->method.sync_level;
} else {
@@ -567,7 +569,7 @@
acpi_os_release_mutex(method_desc->method.mutex->mutex.
os_mutex);
- method_desc->method.mutex->mutex.owner_thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+ method_desc->method.mutex->mutex.owner_thread = NULL;
}
}
diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c
index 6c6104a..fc9da48 100644
--- a/drivers/acpi/dispatcher/dsopcode.c
+++ b/drivers/acpi/dispatcher/dsopcode.c
@@ -866,8 +866,7 @@
((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
(op->common.parent->common.aml_opcode !=
AML_VAR_PACKAGE_OP)
- && (op->common.parent->common.aml_opcode !=
- AML_NAME_OP))) {
+ && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
walk_state->result_obj = obj_desc;
}
}
diff --git a/drivers/acpi/dispatcher/dsutils.c b/drivers/acpi/dispatcher/dsutils.c
index e4073e0..71503c0 100644
--- a/drivers/acpi/dispatcher/dsutils.c
+++ b/drivers/acpi/dispatcher/dsutils.c
@@ -556,10 +556,9 @@
* indicate this to the interpreter, set the
* object to the root
*/
- obj_desc =
- ACPI_CAST_PTR(union
- acpi_operand_object,
- acpi_gbl_root_node);
+ obj_desc = ACPI_CAST_PTR(union
+ acpi_operand_object,
+ acpi_gbl_root_node);
status = AE_OK;
} else {
/*
diff --git a/drivers/acpi/dispatcher/dswstate.c b/drivers/acpi/dispatcher/dswstate.c
index 16c8e38..5afcdd9 100644
--- a/drivers/acpi/dispatcher/dswstate.c
+++ b/drivers/acpi/dispatcher/dswstate.c
@@ -630,12 +630,9 @@
*
******************************************************************************/
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
- union acpi_parse_object
- *origin,
- union acpi_operand_object
- *method_desc,
- struct acpi_thread_state
+struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
+ *origin, union acpi_operand_object
+ *method_desc, struct acpi_thread_state
*thread)
{
struct acpi_walk_state *walk_state;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index e08cf98..82f496c 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -147,9 +147,10 @@
return 0;
}
-static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, unsigned count)
+static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event,
+ unsigned count, int force_poll)
{
- if (acpi_ec_mode == EC_POLL) {
+ if (unlikely(force_poll) || acpi_ec_mode == EC_POLL) {
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event, 0))
@@ -173,14 +174,15 @@
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
const u8 * wdata, unsigned wdata_len,
- u8 * rdata, unsigned rdata_len)
+ u8 * rdata, unsigned rdata_len,
+ int force_poll)
{
int result = 0;
unsigned count = atomic_read(&ec->event_count);
acpi_ec_write_cmd(ec, command);
for (; wdata_len > 0; --wdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"write_cmd timeout, command = %d\n", command);
@@ -191,7 +193,7 @@
}
if (!rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"finish-write timeout, command = %d\n", command);
@@ -202,7 +204,7 @@
}
for (; rdata_len > 0; --rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count, force_poll);
if (result) {
printk(KERN_ERR PREFIX "read timeout, command = %d\n",
command);
@@ -217,7 +219,8 @@
static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
const u8 * wdata, unsigned wdata_len,
- u8 * rdata, unsigned rdata_len)
+ u8 * rdata, unsigned rdata_len,
+ int force_poll)
{
int status;
u32 glk;
@@ -240,7 +243,7 @@
/* Make sure GPE is enabled before doing transaction */
acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
+ status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
if (status) {
printk(KERN_DEBUG PREFIX
"input buffer is not empty, aborting transaction\n");
@@ -249,7 +252,8 @@
status = acpi_ec_transaction_unlocked(ec, command,
wdata, wdata_len,
- rdata, rdata_len);
+ rdata, rdata_len,
+ force_poll);
end:
@@ -267,12 +271,12 @@
int acpi_ec_burst_enable(struct acpi_ec *ec)
{
u8 d;
- return acpi_ec_transaction(ec, ACPI_EC_BURST_ENABLE, NULL, 0, &d, 1);
+ return acpi_ec_transaction(ec, ACPI_EC_BURST_ENABLE, NULL, 0, &d, 1, 0);
}
int acpi_ec_burst_disable(struct acpi_ec *ec)
{
- return acpi_ec_transaction(ec, ACPI_EC_BURST_DISABLE, NULL, 0, NULL, 0);
+ return acpi_ec_transaction(ec, ACPI_EC_BURST_DISABLE, NULL, 0, NULL, 0, 0);
}
static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
@@ -281,7 +285,7 @@
u8 d;
result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_READ,
- &address, 1, &d, 1);
+ &address, 1, &d, 1, 0);
*data = d;
return result;
}
@@ -290,7 +294,7 @@
{
u8 wdata[2] = { address, data };
return acpi_ec_transaction(ec, ACPI_EC_COMMAND_WRITE,
- wdata, 2, NULL, 0);
+ wdata, 2, NULL, 0, 0);
}
/*
@@ -349,13 +353,15 @@
int ec_transaction(u8 command,
const u8 * wdata, unsigned wdata_len,
- u8 * rdata, unsigned rdata_len)
+ u8 * rdata, unsigned rdata_len,
+ int force_poll)
{
if (!first_ec)
return -ENODEV;
return acpi_ec_transaction(first_ec, command, wdata,
- wdata_len, rdata, rdata_len);
+ wdata_len, rdata, rdata_len,
+ force_poll);
}
EXPORT_SYMBOL(ec_transaction);
@@ -374,7 +380,7 @@
* bit to be cleared (and thus clearing the interrupt source).
*/
- result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1);
+ result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1, 0);
if (result)
return result;
@@ -410,6 +416,7 @@
acpi_status status = AE_OK;
u8 value;
struct acpi_ec *ec = data;
+
atomic_inc(&ec->event_count);
if (acpi_ec_mode == EC_INTR) {
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index 635ba44..e22f4a9 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -341,9 +341,8 @@
/* A Non-NULL gpe_device means this is a GPE Block Device */
- obj_desc =
- acpi_ns_get_attached_object((struct acpi_namespace_node *)
- gpe_device);
+ obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
+ gpe_device);
if (!obj_desc || !obj_desc->device.gpe_block) {
return (NULL);
}
diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c
index ad5bc76..902c287 100644
--- a/drivers/acpi/events/evgpeblk.c
+++ b/drivers/acpi/events/evgpeblk.c
@@ -1033,8 +1033,7 @@
if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_METHOD)
- && (gpe_event_info->
- flags & ACPI_GPE_TYPE_RUNTIME)) {
+ && (gpe_event_info->flags & ACPI_GPE_TYPE_RUNTIME)) {
gpe_enabled_count++;
}
diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index cae786c..21cb749 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -196,15 +196,12 @@
notify_info->notify.value = (u16) notify_value;
notify_info->notify.handler_obj = handler_obj;
- acpi_ex_exit_interpreter();
-
- acpi_ev_notify_dispatch(notify_info);
-
- status = acpi_ex_enter_interpreter();
+ status =
+ acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch,
+ notify_info);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ acpi_ut_delete_generic_state(notify_info);
}
-
}
if (!handler_obj) {
@@ -323,8 +320,9 @@
acpi_gbl_global_lock_acquired = TRUE;
/* Send a unit to the semaphore */
- if (ACPI_FAILURE(acpi_os_signal_semaphore(
- acpi_gbl_global_lock_semaphore, 1))) {
+ if (ACPI_FAILURE
+ (acpi_os_signal_semaphore
+ (acpi_gbl_global_lock_semaphore, 1))) {
ACPI_ERROR((AE_INFO,
"Could not signal Global Lock semaphore"));
}
@@ -450,7 +448,9 @@
}
if (ACPI_FAILURE(status)) {
- status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, timeout);
+ status =
+ acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex,
+ timeout);
}
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c
index 96b0e84..e99f0c4 100644
--- a/drivers/acpi/events/evregion.c
+++ b/drivers/acpi/events/evregion.c
@@ -291,7 +291,6 @@
u32 bit_width, acpi_integer * value)
{
acpi_status status;
- acpi_status status2;
acpi_adr_space_handler handler;
acpi_adr_space_setup region_setup;
union acpi_operand_object *handler_desc;
@@ -345,7 +344,7 @@
* setup will potentially execute control methods
* (e.g., _REG method for this region)
*/
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
@@ -353,10 +352,7 @@
/* Re-enter the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
/* Check for failure of the Region Setup */
@@ -409,7 +405,7 @@
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
}
/* Call the handler */
@@ -430,10 +426,7 @@
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/events/evrgnini.c b/drivers/acpi/events/evrgnini.c
index a4fa7e6..400d90f 100644
--- a/drivers/acpi/events/evrgnini.c
+++ b/drivers/acpi/events/evrgnini.c
@@ -228,7 +228,8 @@
/* Install a handler for this PCI root bridge */
- status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
+ status =
+ acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
if (ACPI_FAILURE(status)) {
if (status == AE_SAME_HANDLER) {
/*
diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c
index a3379ba..6d866a0 100644
--- a/drivers/acpi/events/evxface.c
+++ b/drivers/acpi/events/evxface.c
@@ -91,7 +91,6 @@
ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
#endif /* ACPI_FUTURE_USAGE */
-
/*******************************************************************************
*
* FUNCTION: acpi_install_fixed_event_handler
@@ -768,11 +767,9 @@
return (AE_BAD_PARAMETER);
}
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ /* Must lock interpreter to prevent race conditions */
+ acpi_ex_enter_interpreter();
status = acpi_ev_acquire_global_lock(timeout);
acpi_ex_exit_interpreter();
diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c
index 17065e9..9cbd341 100644
--- a/drivers/acpi/events/evxfevnt.c
+++ b/drivers/acpi/events/evxfevnt.c
@@ -472,7 +472,6 @@
}
ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
-
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
@@ -568,7 +567,6 @@
ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
#endif /* ACPI_FUTURE_USAGE */
-
/*******************************************************************************
*
* FUNCTION: acpi_install_gpe_block
diff --git a/drivers/acpi/executer/exconvrt.c b/drivers/acpi/executer/exconvrt.c
index d470e8b..79f2c0d 100644
--- a/drivers/acpi/executer/exconvrt.c
+++ b/drivers/acpi/executer/exconvrt.c
@@ -512,9 +512,8 @@
* Create a new string object and string buffer
* (-1 because of extra separator included in string_length from above)
*/
- return_desc =
- acpi_ut_create_string_object((acpi_size)
- (string_length - 1));
+ return_desc = acpi_ut_create_string_object((acpi_size)
+ (string_length - 1));
if (!return_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c
index ae97812..6e9a23e 100644
--- a/drivers/acpi/executer/excreate.c
+++ b/drivers/acpi/executer/excreate.c
@@ -50,7 +50,6 @@
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("excreate")
-
#ifndef ACPI_NO_METHOD_EXECUTION
/*******************************************************************************
*
@@ -583,10 +582,7 @@
* Get the sync_level. If method is serialized, a mutex will be
* created for this method when it is parsed.
*/
- if (acpi_gbl_all_methods_serialized) {
- obj_desc->method.sync_level = 0;
- obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
- } else if (method_flags & AML_METHOD_SERIALIZED) {
+ if (method_flags & AML_METHOD_SERIALIZED) {
/*
* ACPI 1.0: sync_level = 0
* ACPI 2.0: sync_level = sync_level in method declaration
diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c
index 1a73c14..51c9c29 100644
--- a/drivers/acpi/executer/exdump.c
+++ b/drivers/acpi/executer/exdump.c
@@ -134,7 +134,7 @@
static struct acpi_exdump_info acpi_ex_dump_mutex[5] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_mutex), NULL},
{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(mutex.sync_level), "Sync Level"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread_id), "Owner Thread"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread), "Owner Thread"},
{ACPI_EXD_UINT16, ACPI_EXD_OFFSET(mutex.acquisition_depth),
"Acquire Depth"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.os_mutex), "OsMutex"}
@@ -451,9 +451,8 @@
ACPI_FUNCTION_NAME(ex_dump_operand)
- if (!
- ((ACPI_LV_EXEC & acpi_dbg_level)
- && (_COMPONENT & acpi_dbg_layer))) {
+ if (!((ACPI_LV_EXEC & acpi_dbg_level)
+ && (_COMPONENT & acpi_dbg_layer))) {
return;
}
@@ -844,9 +843,8 @@
ACPI_FUNCTION_ENTRY();
if (!flags) {
- if (!
- ((ACPI_LV_OBJECTS & acpi_dbg_level)
- && (_COMPONENT & acpi_dbg_layer))) {
+ if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+ && (_COMPONENT & acpi_dbg_layer))) {
return;
}
}
@@ -1011,9 +1009,8 @@
}
if (!flags) {
- if (!
- ((ACPI_LV_OBJECTS & acpi_dbg_level)
- && (_COMPONENT & acpi_dbg_layer))) {
+ if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+ && (_COMPONENT & acpi_dbg_layer))) {
return_VOID;
}
}
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index 4eb883b..6748e3e 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -66,9 +66,10 @@
*
******************************************************************************/
-void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc,
- struct acpi_thread_state *thread)
+void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc)
{
+ struct acpi_thread_state *thread = obj_desc->mutex.owner_thread;
+
if (!thread) {
return;
}
@@ -173,13 +174,16 @@
/* Support for multiple acquires by the owning thread */
- if (obj_desc->mutex.owner_thread_id == acpi_os_get_thread_id()) {
- /*
- * The mutex is already owned by this thread, just increment the
- * acquisition depth
- */
- obj_desc->mutex.acquisition_depth++;
- return_ACPI_STATUS(AE_OK);
+ if (obj_desc->mutex.owner_thread) {
+ if (obj_desc->mutex.owner_thread->thread_id ==
+ walk_state->thread->thread_id) {
+ /*
+ * The mutex is already owned by this thread, just increment the
+ * acquisition depth
+ */
+ obj_desc->mutex.acquisition_depth++;
+ return_ACPI_STATUS(AE_OK);
+ }
}
/* Acquire the mutex, wait if necessary. Special case for Global Lock */
@@ -202,7 +206,7 @@
/* Have the mutex: update mutex and walk info and save the sync_level */
- obj_desc->mutex.owner_thread_id = acpi_os_get_thread_id();
+ obj_desc->mutex.owner_thread = walk_state->thread;
obj_desc->mutex.acquisition_depth = 1;
obj_desc->mutex.original_sync_level =
walk_state->thread->current_sync_level;
@@ -242,7 +246,7 @@
/* The mutex must have been previously acquired in order to release it */
- if (!obj_desc->mutex.owner_thread_id) {
+ if (!obj_desc->mutex.owner_thread) {
ACPI_ERROR((AE_INFO,
"Cannot release Mutex [%4.4s], not acquired",
acpi_ut_get_node_name(obj_desc->mutex.node)));
@@ -262,14 +266,15 @@
* The Mutex is owned, but this thread must be the owner.
* Special case for Global Lock, any thread can release
*/
- if ((obj_desc->mutex.owner_thread_id !=
+ if ((obj_desc->mutex.owner_thread->thread_id !=
walk_state->thread->thread_id)
&& (obj_desc->mutex.os_mutex != acpi_gbl_global_lock_mutex)) {
ACPI_ERROR((AE_INFO,
"Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
(unsigned long)walk_state->thread->thread_id,
acpi_ut_get_node_name(obj_desc->mutex.node),
- (unsigned long)obj_desc->mutex.owner_thread_id));
+ (unsigned long)obj_desc->mutex.owner_thread->
+ thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
@@ -296,7 +301,7 @@
/* Unlink the mutex from the owner's list */
- acpi_ex_unlink_mutex(obj_desc, walk_state->thread);
+ acpi_ex_unlink_mutex(obj_desc);
/* Release the mutex, special case for Global Lock */
@@ -308,7 +313,7 @@
/* Update the mutex and restore sync_level */
- obj_desc->mutex.owner_thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+ obj_desc->mutex.owner_thread = NULL;
walk_state->thread->current_sync_level =
obj_desc->mutex.original_sync_level;
@@ -363,7 +368,7 @@
/* Mark mutex unowned */
- obj_desc->mutex.owner_thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+ obj_desc->mutex.owner_thread = NULL;
/* Update Thread sync_level (Last mutex is the important one) */
diff --git a/drivers/acpi/executer/exnames.c b/drivers/acpi/executer/exnames.c
index 1ee4fb1..308eae5 100644
--- a/drivers/acpi/executer/exnames.c
+++ b/drivers/acpi/executer/exnames.c
@@ -177,8 +177,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Bytes from stream:\n"));
- for (index = 0;
- (index < ACPI_NAME_SIZE)
+ for (index = 0; (index < ACPI_NAME_SIZE)
&& (acpi_ut_valid_acpi_char(*aml_address, 0)); index++) {
char_buf[index] = *aml_address++;
ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "%c\n", char_buf[index]));
diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
index a669662..efe5d4b 100644
--- a/drivers/acpi/executer/exprep.c
+++ b/drivers/acpi/executer/exprep.c
@@ -242,7 +242,7 @@
obj_desc->common_field.bit_length,
0xFFFFFFFF
/* Temp until we pass region_length as parameter */
- );
+ );
bit_length = byte_alignment * 8;
#endif
diff --git a/drivers/acpi/executer/exresop.c b/drivers/acpi/executer/exresop.c
index ba76186..09d897b 100644
--- a/drivers/acpi/executer/exresop.c
+++ b/drivers/acpi/executer/exresop.c
@@ -354,8 +354,7 @@
if ((opcode == AML_STORE_OP) &&
(ACPI_GET_OBJECT_TYPE(*stack_ptr) ==
ACPI_TYPE_LOCAL_REFERENCE)
- && ((*stack_ptr)->reference.opcode ==
- AML_INDEX_OP)) {
+ && ((*stack_ptr)->reference.opcode == AML_INDEX_OP)) {
goto next_operand;
}
break;
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c
index b2edf62..9460baf 100644
--- a/drivers/acpi/executer/exsystem.c
+++ b/drivers/acpi/executer/exsystem.c
@@ -66,7 +66,6 @@
acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
{
acpi_status status;
- acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);
@@ -79,7 +78,7 @@
/* We must wait, so unlock the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = acpi_os_wait_semaphore(semaphore, 1, timeout);
@@ -89,13 +88,7 @@
/* Reacquire the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
-
- /* Report fatal error, could not acquire interpreter */
-
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
@@ -119,7 +112,6 @@
acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
{
acpi_status status;
- acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_mutex);
@@ -132,7 +124,7 @@
/* We must wait, so unlock the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = acpi_os_acquire_mutex(mutex, timeout);
@@ -142,13 +134,7 @@
/* Reacquire the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
-
- /* Report fatal error, could not acquire interpreter */
-
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
@@ -209,20 +195,18 @@
acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
{
- acpi_status status;
-
ACPI_FUNCTION_ENTRY();
/* Since this thread will sleep, we must release the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
acpi_os_sleep(how_long);
/* And now we must get the interpreter again */
- status = acpi_ex_enter_interpreter();
- return (status);
+ acpi_ex_reacquire_interpreter();
+ return (AE_OK);
}
/*******************************************************************************
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c
index aea461f..6b0aecc 100644
--- a/drivers/acpi/executer/exutils.c
+++ b/drivers/acpi/executer/exutils.c
@@ -76,14 +76,15 @@
*
* PARAMETERS: None
*
- * RETURN: Status
+ * RETURN: None
*
- * DESCRIPTION: Enter the interpreter execution region. Failure to enter
- * the interpreter region is a fatal system error
+ * DESCRIPTION: Enter the interpreter execution region. Failure to enter
+ * the interpreter region is a fatal system error. Used in
+ * conjunction with exit_interpreter.
*
******************************************************************************/
-acpi_status acpi_ex_enter_interpreter(void)
+void acpi_ex_enter_interpreter(void)
{
acpi_status status;
@@ -91,10 +92,42 @@
status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
+ ACPI_ERROR((AE_INFO,
+ "Could not acquire AML Interpreter mutex"));
}
- return_ACPI_STATUS(status);
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_reacquire_interpreter
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Reacquire the interpreter execution region from within the
+ * interpreter code. Failure to enter the interpreter region is a
+ * fatal system error. Used in conjuction with
+ * relinquish_interpreter
+ *
+ ******************************************************************************/
+
+void acpi_ex_reacquire_interpreter(void)
+{
+ ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
+
+ /*
+ * If the global serialized flag is set, do not release the interpreter,
+ * since it was not actually released by acpi_ex_relinquish_interpreter.
+ * This forces the interpreter to be single threaded.
+ */
+ if (!acpi_gbl_all_methods_serialized) {
+ acpi_ex_enter_interpreter();
+ }
+
+ return_VOID;
}
/*******************************************************************************
@@ -105,17 +138,9 @@
*
* RETURN: None
*
- * DESCRIPTION: Exit the interpreter execution region
- *
- * Cases where the interpreter is unlocked:
- * 1) Completion of the execution of a control method
- * 2) Method blocked on a Sleep() AML opcode
- * 3) Method blocked on an Acquire() AML opcode
- * 4) Method blocked on a Wait() AML opcode
- * 5) Method blocked to acquire the global lock
- * 6) Method blocked to execute a serialized control method that is
- * already executing
- * 7) About to invoke a user-installed opregion handler
+ * DESCRIPTION: Exit the interpreter execution region. This is the top level
+ * routine used to exit the interpreter when all processing has
+ * been completed.
*
******************************************************************************/
@@ -127,7 +152,46 @@
status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
+ ACPI_ERROR((AE_INFO,
+ "Could not release AML Interpreter mutex"));
+ }
+
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_relinquish_interpreter
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Exit the interpreter execution region, from within the
+ * interpreter - before attempting an operation that will possibly
+ * block the running thread.
+ *
+ * Cases where the interpreter is unlocked internally
+ * 1) Method to be blocked on a Sleep() AML opcode
+ * 2) Method to be blocked on an Acquire() AML opcode
+ * 3) Method to be blocked on a Wait() AML opcode
+ * 4) Method to be blocked to acquire the global lock
+ * 5) Method to be blocked waiting to execute a serialized control method
+ * that is currently executing
+ * 6) About to invoke a user-installed opregion handler
+ *
+ ******************************************************************************/
+
+void acpi_ex_relinquish_interpreter(void)
+{
+ ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
+
+ /*
+ * If the global serialized flag is set, do not release the interpreter.
+ * This forces the interpreter to be single threaded.
+ */
+ if (!acpi_gbl_all_methods_serialized) {
+ acpi_ex_exit_interpreter();
}
return_VOID;
@@ -141,8 +205,8 @@
*
* RETURN: none
*
- * DESCRIPTION: Truncate a number to 32-bits if the currently executing method
- * belongs to a 32-bit ACPI table.
+ * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
+ * 32-bit, as determined by the revision of the DSDT.
*
******************************************************************************/
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index c84b1fa..76c525d 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -152,7 +152,6 @@
ACPI_EXPORT_SYMBOL(acpi_get_firmware_waking_vector)
#endif
-
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state_prep
diff --git a/drivers/acpi/namespace/nseval.c b/drivers/acpi/namespace/nseval.c
index 26fd0dd..97b2ac5 100644
--- a/drivers/acpi/namespace/nseval.c
+++ b/drivers/acpi/namespace/nseval.c
@@ -75,7 +75,7 @@
* MUTEX: Locks interpreter
*
******************************************************************************/
-acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info)
+acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info)
{
acpi_status status;
@@ -154,11 +154,7 @@
* Execute the method via the interpreter. The interpreter is locked
* here before calling into the AML parser
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
+ acpi_ex_enter_interpreter();
status = acpi_ps_execute_method(info);
acpi_ex_exit_interpreter();
} else {
@@ -182,10 +178,7 @@
* resolution, we must lock it because we could access an opregion.
* The opregion access code assumes that the interpreter is locked.
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ acpi_ex_enter_interpreter();
/* Function has a strange interface */
diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c
index c4ab615..33db224 100644
--- a/drivers/acpi/namespace/nsinit.c
+++ b/drivers/acpi/namespace/nsinit.c
@@ -214,7 +214,7 @@
u32 level, void *context, void **return_value)
{
acpi_object_type type;
- acpi_status status;
+ acpi_status status = AE_OK;
struct acpi_init_walk_info *info =
(struct acpi_init_walk_info *)context;
struct acpi_namespace_node *node =
@@ -268,10 +268,7 @@
/*
* Must lock the interpreter before executing AML code
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ acpi_ex_enter_interpreter();
/*
* Each of these types can contain executable AML code within the
diff --git a/drivers/acpi/namespace/nswalk.c b/drivers/acpi/namespace/nswalk.c
index 94eb8f3..280b835 100644
--- a/drivers/acpi/namespace/nswalk.c
+++ b/drivers/acpi/namespace/nswalk.c
@@ -65,10 +65,8 @@
* within Scope is returned.
*
******************************************************************************/
-struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type,
- struct acpi_namespace_node
- *parent_node,
- struct acpi_namespace_node
+struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node
+ *parent_node, struct acpi_namespace_node
*child_node)
{
struct acpi_namespace_node *next_node = NULL;
diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c
index 8904d0f..be4f289 100644
--- a/drivers/acpi/namespace/nsxfeval.c
+++ b/drivers/acpi/namespace/nsxfeval.c
@@ -48,7 +48,6 @@
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsxfeval")
-
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
@@ -73,8 +72,8 @@
acpi_status
acpi_evaluate_object_typed(acpi_handle handle,
acpi_string pathname,
- struct acpi_object_list * external_params,
- struct acpi_buffer * return_buffer,
+ struct acpi_object_list *external_params,
+ struct acpi_buffer *return_buffer,
acpi_object_type return_type)
{
acpi_status status;
@@ -143,7 +142,6 @@
ACPI_EXPORT_SYMBOL(acpi_evaluate_object_typed)
#endif /* ACPI_FUTURE_USAGE */
-
/*******************************************************************************
*
* FUNCTION: acpi_evaluate_object
@@ -170,7 +168,6 @@
struct acpi_buffer *return_buffer)
{
acpi_status status;
- acpi_status status2;
struct acpi_evaluate_info *info;
acpi_size buffer_space_needed;
u32 i;
@@ -329,14 +326,12 @@
* Delete the internal return object. NOTE: Interpreter must be
* locked to avoid race condition.
*/
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_SUCCESS(status2)) {
+ acpi_ex_enter_interpreter();
- /* Remove one reference on the return object (should delete it) */
+ /* Remove one reference on the return object (should delete it) */
- acpi_ut_remove_reference(info->return_object);
- acpi_ex_exit_interpreter();
- }
+ acpi_ut_remove_reference(info->return_object);
+ acpi_ex_exit_interpreter();
}
cleanup:
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index c2bed56..b998340 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -71,6 +71,7 @@
static acpi_osd_handler acpi_irq_handler;
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
+static struct workqueue_struct *kacpi_notify_wq;
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
@@ -137,8 +138,9 @@
return AE_NULL_ENTRY;
}
kacpid_wq = create_singlethread_workqueue("kacpid");
+ kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
BUG_ON(!kacpid_wq);
-
+ BUG_ON(!kacpi_notify_wq);
return AE_OK;
}
@@ -150,6 +152,7 @@
}
destroy_workqueue(kacpid_wq);
+ destroy_workqueue(kacpi_notify_wq);
return AE_OK;
}
@@ -603,6 +606,23 @@
static void acpi_os_execute_deferred(struct work_struct *work)
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
+ if (!dpc) {
+ printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
+ return;
+ }
+
+ dpc->function(dpc->context);
+ kfree(dpc);
+
+ /* Yield cpu to notify thread */
+ cond_resched();
+
+ return;
+}
+
+static void acpi_os_execute_notify(struct work_struct *work)
+{
+ struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
if (!dpc) {
printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
@@ -637,14 +657,12 @@
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
- ACPI_FUNCTION_TRACE("os_queue_for_execution");
-
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
function, context));
if (!function)
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ return AE_BAD_PARAMETER;
/*
* Allocate/initialize DPC structure. Note that this memory will be
@@ -662,14 +680,21 @@
dpc->function = function;
dpc->context = context;
- INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- if (!queue_work(kacpid_wq, &dpc->work)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ if (type == OSL_NOTIFY_HANDLER) {
+ INIT_WORK(&dpc->work, acpi_os_execute_notify);
+ if (!queue_work(kacpi_notify_wq, &dpc->work)) {
+ status = AE_ERROR;
+ kfree(dpc);
+ }
+ } else {
+ INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+ if (!queue_work(kacpid_wq, &dpc->work)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Call to queue_work() failed.\n"));
- kfree(dpc);
- status = AE_ERROR;
+ status = AE_ERROR;
+ kfree(dpc);
+ }
}
-
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/parser/psopcode.c b/drivers/acpi/parser/psopcode.c
index 16d8b6cc..9296e86 100644
--- a/drivers/acpi/parser/psopcode.c
+++ b/drivers/acpi/parser/psopcode.c
@@ -185,459 +185,453 @@
/* Index Name Parser Args Interpreter Args ObjectType Class Type Flags */
/* 00 */ ACPI_OP("Zero", ARGP_ZERO_OP, ARGI_ZERO_OP, ACPI_TYPE_INTEGER,
- AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
+ AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
/* 01 */ ACPI_OP("One", ARGP_ONE_OP, ARGI_ONE_OP, ACPI_TYPE_INTEGER,
- AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
+ AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
/* 02 */ ACPI_OP("Alias", ARGP_ALIAS_OP, ARGI_ALIAS_OP,
- ACPI_TYPE_LOCAL_ALIAS, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_SIMPLE,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ACPI_TYPE_LOCAL_ALIAS, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_SIMPLE,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 03 */ ACPI_OP("Name", ARGP_NAME_OP, ARGI_NAME_OP, ACPI_TYPE_ANY,
- AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_COMPLEX,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_COMPLEX,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 04 */ ACPI_OP("ByteConst", ARGP_BYTE_OP, ARGI_BYTE_OP,
- ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, AML_CONSTANT),
+ ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, AML_CONSTANT),
/* 05 */ ACPI_OP("WordConst", ARGP_WORD_OP, ARGI_WORD_OP,
- ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, AML_CONSTANT),
+ ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, AML_CONSTANT),
/* 06 */ ACPI_OP("DwordConst", ARGP_DWORD_OP, ARGI_DWORD_OP,
- ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, AML_CONSTANT),
+ ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, AML_CONSTANT),
/* 07 */ ACPI_OP("String", ARGP_STRING_OP, ARGI_STRING_OP,
- ACPI_TYPE_STRING, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, AML_CONSTANT),
+ ACPI_TYPE_STRING, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, AML_CONSTANT),
/* 08 */ ACPI_OP("Scope", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
- ACPI_TYPE_LOCAL_SCOPE, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_NO_OBJ,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ACPI_TYPE_LOCAL_SCOPE, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_NO_OBJ,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 09 */ ACPI_OP("Buffer", ARGP_BUFFER_OP, ARGI_BUFFER_OP,
- ACPI_TYPE_BUFFER, AML_CLASS_CREATE,
- AML_TYPE_CREATE_OBJECT,
- AML_HAS_ARGS | AML_DEFER | AML_CONSTANT),
+ ACPI_TYPE_BUFFER, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_OBJECT,
+ AML_HAS_ARGS | AML_DEFER | AML_CONSTANT),
/* 0A */ ACPI_OP("Package", ARGP_PACKAGE_OP, ARGI_PACKAGE_OP,
- ACPI_TYPE_PACKAGE, AML_CLASS_CREATE,
- AML_TYPE_CREATE_OBJECT,
- AML_HAS_ARGS | AML_DEFER | AML_CONSTANT),
+ ACPI_TYPE_PACKAGE, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_OBJECT,
+ AML_HAS_ARGS | AML_DEFER | AML_CONSTANT),
/* 0B */ ACPI_OP("Method", ARGP_METHOD_OP, ARGI_METHOD_OP,
- ACPI_TYPE_METHOD, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_COMPLEX,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED | AML_DEFER),
+ ACPI_TYPE_METHOD, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_COMPLEX,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED | AML_DEFER),
/* 0C */ ACPI_OP("Local0", ARGP_LOCAL0, ARGI_LOCAL0,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 0D */ ACPI_OP("Local1", ARGP_LOCAL1, ARGI_LOCAL1,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 0E */ ACPI_OP("Local2", ARGP_LOCAL2, ARGI_LOCAL2,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 0F */ ACPI_OP("Local3", ARGP_LOCAL3, ARGI_LOCAL3,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 10 */ ACPI_OP("Local4", ARGP_LOCAL4, ARGI_LOCAL4,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 11 */ ACPI_OP("Local5", ARGP_LOCAL5, ARGI_LOCAL5,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 12 */ ACPI_OP("Local6", ARGP_LOCAL6, ARGI_LOCAL6,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 13 */ ACPI_OP("Local7", ARGP_LOCAL7, ARGI_LOCAL7,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LOCAL_VARIABLE, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LOCAL_VARIABLE, 0),
/* 14 */ ACPI_OP("Arg0", ARGP_ARG0, ARGI_ARG0,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 15 */ ACPI_OP("Arg1", ARGP_ARG1, ARGI_ARG1,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 16 */ ACPI_OP("Arg2", ARGP_ARG2, ARGI_ARG2,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 17 */ ACPI_OP("Arg3", ARGP_ARG3, ARGI_ARG3,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 18 */ ACPI_OP("Arg4", ARGP_ARG4, ARGI_ARG4,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 19 */ ACPI_OP("Arg5", ARGP_ARG5, ARGI_ARG5,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 1A */ ACPI_OP("Arg6", ARGP_ARG6, ARGI_ARG6,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_METHOD_ARGUMENT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_METHOD_ARGUMENT, 0),
/* 1B */ ACPI_OP("Store", ARGP_STORE_OP, ARGI_STORE_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R),
/* 1C */ ACPI_OP("RefOf", ARGP_REF_OF_OP, ARGI_REF_OF_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
- AML_FLAGS_EXEC_1A_0T_1R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
+ AML_FLAGS_EXEC_1A_0T_1R),
/* 1D */ ACPI_OP("Add", ARGP_ADD_OP, ARGI_ADD_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 1E */ ACPI_OP("Concatenate", ARGP_CONCAT_OP, ARGI_CONCAT_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 1F */ ACPI_OP("Subtract", ARGP_SUBTRACT_OP, ARGI_SUBTRACT_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 20 */ ACPI_OP("Increment", ARGP_INCREMENT_OP, ARGI_INCREMENT_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_1R,
- AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_1R,
+ AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
/* 21 */ ACPI_OP("Decrement", ARGP_DECREMENT_OP, ARGI_DECREMENT_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_1R,
- AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_1R,
+ AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
/* 22 */ ACPI_OP("Multiply", ARGP_MULTIPLY_OP, ARGI_MULTIPLY_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 23 */ ACPI_OP("Divide", ARGP_DIVIDE_OP, ARGI_DIVIDE_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_2T_1R,
- AML_FLAGS_EXEC_2A_2T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_2T_1R,
+ AML_FLAGS_EXEC_2A_2T_1R | AML_CONSTANT),
/* 24 */ ACPI_OP("ShiftLeft", ARGP_SHIFT_LEFT_OP, ARGI_SHIFT_LEFT_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 25 */ ACPI_OP("ShiftRight", ARGP_SHIFT_RIGHT_OP, ARGI_SHIFT_RIGHT_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 26 */ ACPI_OP("And", ARGP_BIT_AND_OP, ARGI_BIT_AND_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 27 */ ACPI_OP("NAnd", ARGP_BIT_NAND_OP, ARGI_BIT_NAND_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 28 */ ACPI_OP("Or", ARGP_BIT_OR_OP, ARGI_BIT_OR_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 29 */ ACPI_OP("NOr", ARGP_BIT_NOR_OP, ARGI_BIT_NOR_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 2A */ ACPI_OP("XOr", ARGP_BIT_XOR_OP, ARGI_BIT_XOR_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 2B */ ACPI_OP("Not", ARGP_BIT_NOT_OP, ARGI_BIT_NOT_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 2C */ ACPI_OP("FindSetLeftBit", ARGP_FIND_SET_LEFT_BIT_OP,
- ARGI_FIND_SET_LEFT_BIT_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ARGI_FIND_SET_LEFT_BIT_OP, ACPI_TYPE_ANY,
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 2D */ ACPI_OP("FindSetRightBit", ARGP_FIND_SET_RIGHT_BIT_OP,
- ARGI_FIND_SET_RIGHT_BIT_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ARGI_FIND_SET_RIGHT_BIT_OP, ACPI_TYPE_ANY,
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 2E */ ACPI_OP("DerefOf", ARGP_DEREF_OF_OP, ARGI_DEREF_OF_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_1R, AML_FLAGS_EXEC_1A_0T_1R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_1R, AML_FLAGS_EXEC_1A_0T_1R),
/* 2F */ ACPI_OP("Notify", ARGP_NOTIFY_OP, ARGI_NOTIFY_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_0T_0R, AML_FLAGS_EXEC_2A_0T_0R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_0T_0R, AML_FLAGS_EXEC_2A_0T_0R),
/* 30 */ ACPI_OP("SizeOf", ARGP_SIZE_OF_OP, ARGI_SIZE_OF_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_1R,
- AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_1R,
+ AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
/* 31 */ ACPI_OP("Index", ARGP_INDEX_OP, ARGI_INDEX_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R),
/* 32 */ ACPI_OP("Match", ARGP_MATCH_OP, ARGI_MATCH_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_6A_0T_1R,
- AML_FLAGS_EXEC_6A_0T_1R | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_6A_0T_1R,
+ AML_FLAGS_EXEC_6A_0T_1R | AML_CONSTANT),
/* 33 */ ACPI_OP("CreateDWordField", ARGP_CREATE_DWORD_FIELD_OP,
- ARGI_CREATE_DWORD_FIELD_OP,
- ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
- AML_TYPE_CREATE_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
- AML_DEFER | AML_CREATE),
+ ARGI_CREATE_DWORD_FIELD_OP,
+ ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
+ AML_DEFER | AML_CREATE),
/* 34 */ ACPI_OP("CreateWordField", ARGP_CREATE_WORD_FIELD_OP,
- ARGI_CREATE_WORD_FIELD_OP,
- ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
- AML_TYPE_CREATE_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
- AML_DEFER | AML_CREATE),
+ ARGI_CREATE_WORD_FIELD_OP,
+ ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
+ AML_DEFER | AML_CREATE),
/* 35 */ ACPI_OP("CreateByteField", ARGP_CREATE_BYTE_FIELD_OP,
- ARGI_CREATE_BYTE_FIELD_OP,
- ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
- AML_TYPE_CREATE_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
- AML_DEFER | AML_CREATE),
+ ARGI_CREATE_BYTE_FIELD_OP,
+ ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
+ AML_DEFER | AML_CREATE),
/* 36 */ ACPI_OP("CreateBitField", ARGP_CREATE_BIT_FIELD_OP,
- ARGI_CREATE_BIT_FIELD_OP,
- ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
- AML_TYPE_CREATE_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
- AML_DEFER | AML_CREATE),
+ ARGI_CREATE_BIT_FIELD_OP,
+ ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
+ AML_DEFER | AML_CREATE),
/* 37 */ ACPI_OP("ObjectType", ARGP_TYPE_OP, ARGI_TYPE_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_1R,
- AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_1R,
+ AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
/* 38 */ ACPI_OP("LAnd", ARGP_LAND_OP, ARGI_LAND_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
- AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
/* 39 */ ACPI_OP("LOr", ARGP_LOR_OP, ARGI_LOR_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
- AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
/* 3A */ ACPI_OP("LNot", ARGP_LNOT_OP, ARGI_LNOT_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
- AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
+ AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
/* 3B */ ACPI_OP("LEqual", ARGP_LEQUAL_OP, ARGI_LEQUAL_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_0T_1R,
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
/* 3C */ ACPI_OP("LGreater", ARGP_LGREATER_OP, ARGI_LGREATER_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_0T_1R,
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
/* 3D */ ACPI_OP("LLess", ARGP_LLESS_OP, ARGI_LLESS_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
/* 3E */ ACPI_OP("If", ARGP_IF_OP, ARGI_IF_OP, ACPI_TYPE_ANY,
- AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
+ AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 3F */ ACPI_OP("Else", ARGP_ELSE_OP, ARGI_ELSE_OP, ACPI_TYPE_ANY,
- AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
+ AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 40 */ ACPI_OP("While", ARGP_WHILE_OP, ARGI_WHILE_OP, ACPI_TYPE_ANY,
- AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
+ AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 41 */ ACPI_OP("Noop", ARGP_NOOP_OP, ARGI_NOOP_OP, ACPI_TYPE_ANY,
- AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
+ AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 42 */ ACPI_OP("Return", ARGP_RETURN_OP, ARGI_RETURN_OP,
- ACPI_TYPE_ANY, AML_CLASS_CONTROL,
- AML_TYPE_CONTROL, AML_HAS_ARGS),
+ ACPI_TYPE_ANY, AML_CLASS_CONTROL,
+ AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 43 */ ACPI_OP("Break", ARGP_BREAK_OP, ARGI_BREAK_OP, ACPI_TYPE_ANY,
- AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
+ AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 44 */ ACPI_OP("BreakPoint", ARGP_BREAK_POINT_OP, ARGI_BREAK_POINT_OP,
- ACPI_TYPE_ANY, AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
+ ACPI_TYPE_ANY, AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 45 */ ACPI_OP("Ones", ARGP_ONES_OP, ARGI_ONES_OP, ACPI_TYPE_INTEGER,
- AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
+ AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
/* Prefixed opcodes (Two-byte opcodes with a prefix op) */
/* 46 */ ACPI_OP("Mutex", ARGP_MUTEX_OP, ARGI_MUTEX_OP, ACPI_TYPE_MUTEX,
- AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 47 */ ACPI_OP("Event", ARGP_EVENT_OP, ARGI_EVENT_OP, ACPI_TYPE_EVENT,
- AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
- AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE | AML_NAMED),
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
+ AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE | AML_NAMED),
/* 48 */ ACPI_OP("CondRefOf", ARGP_COND_REF_OF_OP, ARGI_COND_REF_OF_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_1T_1R, AML_FLAGS_EXEC_1A_1T_1R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_1T_1R, AML_FLAGS_EXEC_1A_1T_1R),
/* 49 */ ACPI_OP("CreateField", ARGP_CREATE_FIELD_OP,
- ARGI_CREATE_FIELD_OP, ACPI_TYPE_BUFFER_FIELD,
- AML_CLASS_CREATE, AML_TYPE_CREATE_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
- AML_DEFER | AML_FIELD | AML_CREATE),
+ ARGI_CREATE_FIELD_OP, ACPI_TYPE_BUFFER_FIELD,
+ AML_CLASS_CREATE, AML_TYPE_CREATE_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
+ AML_DEFER | AML_FIELD | AML_CREATE),
/* 4A */ ACPI_OP("Load", ARGP_LOAD_OP, ARGI_LOAD_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_0R,
- AML_FLAGS_EXEC_1A_1T_0R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_0R,
+ AML_FLAGS_EXEC_1A_1T_0R),
/* 4B */ ACPI_OP("Stall", ARGP_STALL_OP, ARGI_STALL_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
- AML_FLAGS_EXEC_1A_0T_0R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
+ AML_FLAGS_EXEC_1A_0T_0R),
/* 4C */ ACPI_OP("Sleep", ARGP_SLEEP_OP, ARGI_SLEEP_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
- AML_FLAGS_EXEC_1A_0T_0R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
+ AML_FLAGS_EXEC_1A_0T_0R),
/* 4D */ ACPI_OP("Acquire", ARGP_ACQUIRE_OP, ARGI_ACQUIRE_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_0T_1R, AML_FLAGS_EXEC_2A_0T_1R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_0T_1R, AML_FLAGS_EXEC_2A_0T_1R),
/* 4E */ ACPI_OP("Signal", ARGP_SIGNAL_OP, ARGI_SIGNAL_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
/* 4F */ ACPI_OP("Wait", ARGP_WAIT_OP, ARGI_WAIT_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
+ AML_FLAGS_EXEC_2A_0T_1R),
/* 50 */ ACPI_OP("Reset", ARGP_RESET_OP, ARGI_RESET_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
- AML_FLAGS_EXEC_1A_0T_0R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
+ AML_FLAGS_EXEC_1A_0T_0R),
/* 51 */ ACPI_OP("Release", ARGP_RELEASE_OP, ARGI_RELEASE_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
/* 52 */ ACPI_OP("FromBCD", ARGP_FROM_BCD_OP, ARGI_FROM_BCD_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 53 */ ACPI_OP("ToBCD", ARGP_TO_BCD_OP, ARGI_TO_BCD_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 54 */ ACPI_OP("Unload", ARGP_UNLOAD_OP, ARGI_UNLOAD_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
/* 55 */ ACPI_OP("Revision", ARGP_REVISION_OP, ARGI_REVISION_OP,
- ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
- AML_TYPE_CONSTANT, 0),
+ ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
+ AML_TYPE_CONSTANT, 0),
/* 56 */ ACPI_OP("Debug", ARGP_DEBUG_OP, ARGI_DEBUG_OP,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_CONSTANT, 0),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_CONSTANT, 0),
/* 57 */ ACPI_OP("Fatal", ARGP_FATAL_OP, ARGI_FATAL_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_3A_0T_0R,
- AML_FLAGS_EXEC_3A_0T_0R),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_3A_0T_0R,
+ AML_FLAGS_EXEC_3A_0T_0R),
/* 58 */ ACPI_OP("OperationRegion", ARGP_REGION_OP, ARGI_REGION_OP,
- ACPI_TYPE_REGION, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_COMPLEX,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED | AML_DEFER),
+ ACPI_TYPE_REGION, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_COMPLEX,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED | AML_DEFER),
/* 59 */ ACPI_OP("Field", ARGP_FIELD_OP, ARGI_FIELD_OP, ACPI_TYPE_ANY,
- AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_FIELD),
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
/* 5A */ ACPI_OP("Device", ARGP_DEVICE_OP, ARGI_DEVICE_OP,
- ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_NO_OBJ,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_NO_OBJ,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 5B */ ACPI_OP("Processor", ARGP_PROCESSOR_OP, ARGI_PROCESSOR_OP,
- ACPI_TYPE_PROCESSOR, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_SIMPLE,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ACPI_TYPE_PROCESSOR, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_SIMPLE,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 5C */ ACPI_OP("PowerResource", ARGP_POWER_RES_OP, ARGI_POWER_RES_OP,
- ACPI_TYPE_POWER, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_SIMPLE,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ACPI_TYPE_POWER, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_SIMPLE,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 5D */ ACPI_OP("ThermalZone", ARGP_THERMAL_ZONE_OP,
- ARGI_THERMAL_ZONE_OP, ACPI_TYPE_THERMAL,
- AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_NO_OBJ,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ARGI_THERMAL_ZONE_OP, ACPI_TYPE_THERMAL,
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_NO_OBJ,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 5E */ ACPI_OP("IndexField", ARGP_INDEX_FIELD_OP, ARGI_INDEX_FIELD_OP,
- ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_FIELD),
+ ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
/* 5F */ ACPI_OP("BankField", ARGP_BANK_FIELD_OP, ARGI_BANK_FIELD_OP,
- ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_FIELD),
+ ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
/* Internal opcodes that map to invalid AML opcodes */
/* 60 */ ACPI_OP("LNotEqual", ARGP_LNOTEQUAL_OP, ARGI_LNOTEQUAL_OP,
- ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
- AML_TYPE_BOGUS, AML_HAS_ARGS | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
+ AML_TYPE_BOGUS, AML_HAS_ARGS | AML_CONSTANT),
/* 61 */ ACPI_OP("LLessEqual", ARGP_LLESSEQUAL_OP, ARGI_LLESSEQUAL_OP,
- ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
- AML_TYPE_BOGUS, AML_HAS_ARGS | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
+ AML_TYPE_BOGUS, AML_HAS_ARGS | AML_CONSTANT),
/* 62 */ ACPI_OP("LGreaterEqual", ARGP_LGREATEREQUAL_OP,
- ARGI_LGREATEREQUAL_OP, ACPI_TYPE_ANY,
- AML_CLASS_INTERNAL, AML_TYPE_BOGUS,
- AML_HAS_ARGS | AML_CONSTANT),
+ ARGI_LGREATEREQUAL_OP, ACPI_TYPE_ANY,
+ AML_CLASS_INTERNAL, AML_TYPE_BOGUS,
+ AML_HAS_ARGS | AML_CONSTANT),
/* 63 */ ACPI_OP("-NamePath-", ARGP_NAMEPATH_OP, ARGI_NAMEPATH_OP,
- ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, AML_NSOBJECT | AML_NSNODE),
+ ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, AML_NSOBJECT | AML_NSNODE),
/* 64 */ ACPI_OP("-MethodCall-", ARGP_METHODCALL_OP, ARGI_METHODCALL_OP,
- ACPI_TYPE_METHOD, AML_CLASS_METHOD_CALL,
- AML_TYPE_METHOD_CALL,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE),
+ ACPI_TYPE_METHOD, AML_CLASS_METHOD_CALL,
+ AML_TYPE_METHOD_CALL,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE),
/* 65 */ ACPI_OP("-ByteList-", ARGP_BYTELIST_OP, ARGI_BYTELIST_OP,
- ACPI_TYPE_ANY, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, 0),
+ ACPI_TYPE_ANY, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, 0),
/* 66 */ ACPI_OP("-ReservedField-", ARGP_RESERVEDFIELD_OP,
- ARGI_RESERVEDFIELD_OP, ACPI_TYPE_ANY,
- AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
+ ARGI_RESERVEDFIELD_OP, ACPI_TYPE_ANY,
+ AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
/* 67 */ ACPI_OP("-NamedField-", ARGP_NAMEDFIELD_OP, ARGI_NAMEDFIELD_OP,
- ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
- AML_TYPE_BOGUS,
- AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE | AML_NAMED),
+ ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
+ AML_TYPE_BOGUS,
+ AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE | AML_NAMED),
/* 68 */ ACPI_OP("-AccessField-", ARGP_ACCESSFIELD_OP,
- ARGI_ACCESSFIELD_OP, ACPI_TYPE_ANY,
- AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
+ ARGI_ACCESSFIELD_OP, ACPI_TYPE_ANY,
+ AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
/* 69 */ ACPI_OP("-StaticString", ARGP_STATICSTRING_OP,
- ARGI_STATICSTRING_OP, ACPI_TYPE_ANY,
- AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
+ ARGI_STATICSTRING_OP, ACPI_TYPE_ANY,
+ AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
/* 6A */ ACPI_OP("-Return Value-", ARG_NONE, ARG_NONE, ACPI_TYPE_ANY,
- AML_CLASS_RETURN_VALUE, AML_TYPE_RETURN,
- AML_HAS_ARGS | AML_HAS_RETVAL),
+ AML_CLASS_RETURN_VALUE, AML_TYPE_RETURN,
+ AML_HAS_ARGS | AML_HAS_RETVAL),
/* 6B */ ACPI_OP("-UNKNOWN_OP-", ARG_NONE, ARG_NONE, ACPI_TYPE_INVALID,
- AML_CLASS_UNKNOWN, AML_TYPE_BOGUS, AML_HAS_ARGS),
+ AML_CLASS_UNKNOWN, AML_TYPE_BOGUS, AML_HAS_ARGS),
/* 6C */ ACPI_OP("-ASCII_ONLY-", ARG_NONE, ARG_NONE, ACPI_TYPE_ANY,
- AML_CLASS_ASCII, AML_TYPE_BOGUS, AML_HAS_ARGS),
+ AML_CLASS_ASCII, AML_TYPE_BOGUS, AML_HAS_ARGS),
/* 6D */ ACPI_OP("-PREFIX_ONLY-", ARG_NONE, ARG_NONE, ACPI_TYPE_ANY,
- AML_CLASS_PREFIX, AML_TYPE_BOGUS, AML_HAS_ARGS),
+ AML_CLASS_PREFIX, AML_TYPE_BOGUS, AML_HAS_ARGS),
/* ACPI 2.0 opcodes */
/* 6E */ ACPI_OP("QwordConst", ARGP_QWORD_OP, ARGI_QWORD_OP,
- ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
- AML_TYPE_LITERAL, AML_CONSTANT),
+ ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
+ AML_TYPE_LITERAL, AML_CONSTANT),
/* 6F */ ACPI_OP("Package", /* Var */ ARGP_VAR_PACKAGE_OP,
ARGI_VAR_PACKAGE_OP, ACPI_TYPE_PACKAGE,
AML_CLASS_CREATE, AML_TYPE_CREATE_OBJECT,
AML_HAS_ARGS | AML_DEFER),
/* 70 */ ACPI_OP("ConcatenateResTemplate", ARGP_CONCAT_RES_OP,
- ARGI_CONCAT_RES_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
+ ARGI_CONCAT_RES_OP, ACPI_TYPE_ANY,
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 71 */ ACPI_OP("Mod", ARGP_MOD_OP, ARGI_MOD_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 72 */ ACPI_OP("CreateQWordField", ARGP_CREATE_QWORD_FIELD_OP,
- ARGI_CREATE_QWORD_FIELD_OP,
- ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
- AML_TYPE_CREATE_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
- AML_DEFER | AML_CREATE),
+ ARGI_CREATE_QWORD_FIELD_OP,
+ ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
+ AML_TYPE_CREATE_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
+ AML_DEFER | AML_CREATE),
/* 73 */ ACPI_OP("ToBuffer", ARGP_TO_BUFFER_OP, ARGI_TO_BUFFER_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 74 */ ACPI_OP("ToDecimalString", ARGP_TO_DEC_STR_OP,
- ARGI_TO_DEC_STR_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ARGI_TO_DEC_STR_OP, ACPI_TYPE_ANY,
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 75 */ ACPI_OP("ToHexString", ARGP_TO_HEX_STR_OP, ARGI_TO_HEX_STR_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 76 */ ACPI_OP("ToInteger", ARGP_TO_INTEGER_OP, ARGI_TO_INTEGER_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_1T_1R,
- AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_1T_1R,
+ AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 77 */ ACPI_OP("ToString", ARGP_TO_STRING_OP, ARGI_TO_STRING_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_2A_1T_1R,
- AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_2A_1T_1R,
+ AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 78 */ ACPI_OP("CopyObject", ARGP_COPY_OP, ARGI_COPY_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_1A_1T_1R, AML_FLAGS_EXEC_1A_1T_1R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_1A_1T_1R, AML_FLAGS_EXEC_1A_1T_1R),
/* 79 */ ACPI_OP("Mid", ARGP_MID_OP, ARGI_MID_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_3A_1T_1R,
- AML_FLAGS_EXEC_3A_1T_1R | AML_CONSTANT),
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_3A_1T_1R,
+ AML_FLAGS_EXEC_3A_1T_1R | AML_CONSTANT),
/* 7A */ ACPI_OP("Continue", ARGP_CONTINUE_OP, ARGI_CONTINUE_OP,
- ACPI_TYPE_ANY, AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
+ ACPI_TYPE_ANY, AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 7B */ ACPI_OP("LoadTable", ARGP_LOAD_TABLE_OP, ARGI_LOAD_TABLE_OP,
- ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
- AML_TYPE_EXEC_6A_0T_1R, AML_FLAGS_EXEC_6A_0T_1R),
+ ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
+ AML_TYPE_EXEC_6A_0T_1R, AML_FLAGS_EXEC_6A_0T_1R),
/* 7C */ ACPI_OP("DataTableRegion", ARGP_DATA_REGION_OP,
- ARGI_DATA_REGION_OP, ACPI_TYPE_REGION,
- AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE | AML_NAMED),
+ ARGI_DATA_REGION_OP, ACPI_TYPE_REGION,
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE | AML_NAMED),
/* 7D */ ACPI_OP("[EvalSubTree]", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
- ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_NO_OBJ,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
- AML_NSNODE),
+ ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
+ AML_TYPE_NAMED_NO_OBJ,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE),
/* ACPI 3.0 opcodes */
/* 7E */ ACPI_OP("Timer", ARGP_TIMER_OP, ARGI_TIMER_OP, ACPI_TYPE_ANY,
- AML_CLASS_EXECUTE, AML_TYPE_EXEC_0A_0T_1R,
- AML_FLAGS_EXEC_0A_0T_1R)
+ AML_CLASS_EXECUTE, AML_TYPE_EXEC_0A_0T_1R,
+ AML_FLAGS_EXEC_0A_0T_1R)
/*! [End] no source code translation !*/
};
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index 8c6d3fd..0dd2ce8 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -567,7 +567,8 @@
(*sub_object_list)->string.
length + 1);
} else {
- temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+ temp_size_needed +=
+ acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
}
} else {
/*
diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
index cc48ab0..50da494 100644
--- a/drivers/acpi/resources/rscreate.c
+++ b/drivers/acpi/resources/rscreate.c
@@ -267,16 +267,19 @@
* If BIOS erroneously reversed the _PRT source_name and source_index,
* then reverse them back.
*/
- if (ACPI_GET_OBJECT_TYPE (sub_object_list[3]) != ACPI_TYPE_INTEGER) {
+ if (ACPI_GET_OBJECT_TYPE(sub_object_list[3]) !=
+ ACPI_TYPE_INTEGER) {
if (acpi_gbl_enable_interpreter_slack) {
source_name_index = 3;
source_index_index = 2;
- printk(KERN_WARNING "ACPI: Handling Garbled _PRT entry\n");
+ printk(KERN_WARNING
+ "ACPI: Handling Garbled _PRT entry\n");
} else {
ACPI_ERROR((AE_INFO,
- "(PRT[%X].source_index) Need Integer, found %s",
- index,
- acpi_ut_get_object_type_name(sub_object_list[3])));
+ "(PRT[%X].source_index) Need Integer, found %s",
+ index,
+ acpi_ut_get_object_type_name
+ (sub_object_list[3])));
return_ACPI_STATUS(AE_BAD_DATA);
}
}
diff --git a/drivers/acpi/resources/rsdump.c b/drivers/acpi/resources/rsdump.c
index de20a5d..46da116 100644
--- a/drivers/acpi/resources/rsdump.c
+++ b/drivers/acpi/resources/rsdump.c
@@ -46,7 +46,6 @@
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsdump")
-
#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
/* Local prototypes */
static void acpi_rs_out_string(char *title, char *value);
@@ -489,10 +488,9 @@
/*
* Optional resource_source for Address resources
*/
- acpi_rs_dump_resource_source(ACPI_CAST_PTR
- (struct
- acpi_resource_source,
- target));
+ acpi_rs_dump_resource_source(ACPI_CAST_PTR(struct
+ acpi_resource_source,
+ target));
break;
default:
diff --git a/drivers/acpi/resources/rsinfo.c b/drivers/acpi/resources/rsinfo.c
index 7e3c335..2c2adb6 100644
--- a/drivers/acpi/resources/rsinfo.c
+++ b/drivers/acpi/resources/rsinfo.c
@@ -142,7 +142,7 @@
};
#endif
-#endif /* ACPI_FUTURE_USAGE */
+#endif /* ACPI_FUTURE_USAGE */
/*
* Base sizes for external AML resource descriptors, indexed by internal type.
* Includes size of the descriptor header (1 byte for small descriptors,
diff --git a/drivers/acpi/resources/rslist.c b/drivers/acpi/resources/rslist.c
index a92755c..ca21e46 100644
--- a/drivers/acpi/resources/rslist.c
+++ b/drivers/acpi/resources/rslist.c
@@ -153,10 +153,9 @@
/* Perform the conversion */
- status = acpi_rs_convert_resource_to_aml(resource,
- ACPI_CAST_PTR(union
- aml_resource,
- aml),
+ status = acpi_rs_convert_resource_to_aml(resource, ACPI_CAST_PTR(union
+ aml_resource,
+ aml),
acpi_gbl_set_resource_dispatch
[resource->type]);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/resources/rsmisc.c b/drivers/acpi/resources/rsmisc.c
index 3b63b56..c7081af 100644
--- a/drivers/acpi/resources/rsmisc.c
+++ b/drivers/acpi/resources/rsmisc.c
@@ -46,7 +46,6 @@
#define _COMPONENT ACPI_RESOURCES
ACPI_MODULE_NAME("rsmisc")
-
#define INIT_RESOURCE_TYPE(i) i->resource_offset
#define INIT_RESOURCE_LENGTH(i) i->aml_offset
#define INIT_TABLE_LENGTH(i) i->value
@@ -429,8 +428,7 @@
* Optional resource_source (Index and String)
*/
aml_length =
- acpi_rs_set_resource_source(aml,
- (acpi_rs_length)
+ acpi_rs_set_resource_source(aml, (acpi_rs_length)
aml_length, source);
acpi_rs_set_resource_length(aml_length, aml);
break;
diff --git a/drivers/acpi/resources/rsutils.c b/drivers/acpi/resources/rsutils.c
index 2442a8f..11c0bd7 100644
--- a/drivers/acpi/resources/rsutils.c
+++ b/drivers/acpi/resources/rsutils.c
@@ -353,10 +353,8 @@
*
* Zero the entire area of the buffer.
*/
- total_length =
- (u32)
- ACPI_STRLEN(ACPI_CAST_PTR(char, &aml_resource_source[1])) +
- 1;
+ total_length = (u32)
+ ACPI_STRLEN(ACPI_CAST_PTR(char, &aml_resource_source[1])) + 1;
total_length = (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(total_length);
ACPI_MEMSET(resource_source->string_ptr, 0, total_length);
diff --git a/drivers/acpi/resources/rsxface.c b/drivers/acpi/resources/rsxface.c
index 991f890..f63813a 100644
--- a/drivers/acpi/resources/rsxface.c
+++ b/drivers/acpi/resources/rsxface.c
@@ -217,7 +217,6 @@
}
ACPI_EXPORT_SYMBOL(acpi_get_current_resources)
-
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
@@ -261,7 +260,6 @@
ACPI_EXPORT_SYMBOL(acpi_get_possible_resources)
#endif /* ACPI_FUTURE_USAGE */
-
/*******************************************************************************
*
* FUNCTION: acpi_set_current_resources
@@ -496,7 +494,6 @@
* each resource in the list.
*
******************************************************************************/
-
acpi_status
acpi_walk_resources(acpi_handle device_handle,
char *name,
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 52b2347..bc7e16e 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -222,7 +222,7 @@
.enter = acpi_hibernation_enter,
.finish = acpi_hibernation_finish,
};
-#endif /* CONFIG_SOFTWARE_SUSPEND */
+#endif /* CONFIG_SOFTWARE_SUSPEND */
/*
* Toshiba fails to preserve interrupts over S1, reinitialization
@@ -276,4 +276,3 @@
return 0;
}
-
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 76b45f0..61f1822 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -349,8 +349,7 @@
end:
return_VALUE(result ? result : count);
}
-#endif /* HAVE_ACPI_LEGACY_ALARM */
-
+#endif /* HAVE_ACPI_LEGACY_ALARM */
extern struct list_head acpi_wakeup_device_list;
extern spinlock_t acpi_device_lock;
@@ -380,8 +379,8 @@
dev->wakeup.state.enabled ? "enabled" : "disabled");
if (ldev)
seq_printf(seq, "%s:%s",
- ldev->bus ? ldev->bus->name : "no-bus",
- ldev->bus_id);
+ ldev->bus ? ldev->bus->name : "no-bus",
+ ldev->bus_id);
seq_printf(seq, "\n");
put_device(ldev);
@@ -490,7 +489,7 @@
return ACPI_INTERRUPT_HANDLED;
}
-#endif /* HAVE_ACPI_LEGACY_ALARM */
+#endif /* HAVE_ACPI_LEGACY_ALARM */
static int __init acpi_sleep_proc_init(void)
{
@@ -517,7 +516,7 @@
entry->proc_fops = &acpi_system_alarm_fops;
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
-#endif /* HAVE_ACPI_LEGACY_ALARM */
+#endif /* HAVE_ACPI_LEGACY_ALARM */
/* 'wakeup device' [R/W] */
entry =
diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c
index 1db833e..1285e91 100644
--- a/drivers/acpi/tables/tbfadt.c
+++ b/drivers/acpi/tables/tbfadt.c
@@ -334,7 +334,8 @@
(acpi_gbl_FADT.xpm1a_event_block.address +
pm1_register_length));
/* Don't forget to copy space_id of the GAS */
- acpi_gbl_xpm1a_enable.space_id = acpi_gbl_FADT.xpm1a_event_block.space_id;
+ acpi_gbl_xpm1a_enable.space_id =
+ acpi_gbl_FADT.xpm1a_event_block.space_id;
/* The PM1B register block is optional, ignore if not present */
@@ -344,7 +345,8 @@
(acpi_gbl_FADT.xpm1b_event_block.
address + pm1_register_length));
/* Don't forget to copy space_id of the GAS */
- acpi_gbl_xpm1b_enable.space_id = acpi_gbl_FADT.xpm1a_event_block.space_id;
+ acpi_gbl_xpm1b_enable.space_id =
+ acpi_gbl_FADT.xpm1a_event_block.space_id;
}
diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c
index 417ef5f..5b302c4 100644
--- a/drivers/acpi/tables/tbxface.c
+++ b/drivers/acpi/tables/tbxface.c
@@ -201,6 +201,7 @@
return_ACPI_STATUS(AE_OK);
}
+
/*******************************************************************************
*
* FUNCTION: acpi_load_table
@@ -262,7 +263,7 @@
acpi_status
acpi_get_table_header(char *signature,
acpi_native_uint instance,
- struct acpi_table_header *out_table_header)
+ struct acpi_table_header * out_table_header)
{
acpi_native_uint i;
acpi_native_uint j;
@@ -321,7 +322,6 @@
ACPI_EXPORT_SYMBOL(acpi_get_table_header)
-
/******************************************************************************
*
* FUNCTION: acpi_unload_table_id
@@ -346,11 +346,11 @@
continue;
}
/*
- * Delete all namespace objects owned by this table. Note that these
- * objects can appear anywhere in the namespace by virtue of the AML
- * "Scope" operator. Thus, we need to track ownership by an ID, not
- * simply a position within the hierarchy
- */
+ * Delete all namespace objects owned by this table. Note that these
+ * objects can appear anywhere in the namespace by virtue of the AML
+ * "Scope" operator. Thus, we need to track ownership by an ID, not
+ * simply a position within the hierarchy
+ */
acpi_tb_delete_namespace_by_owner(i);
status = acpi_tb_release_owner_id(i);
acpi_tb_set_table_loaded_flag(i, FALSE);
@@ -376,7 +376,7 @@
*****************************************************************************/
acpi_status
acpi_get_table(char *signature,
- acpi_native_uint instance, struct acpi_table_header ** out_table)
+ acpi_native_uint instance, struct acpi_table_header **out_table)
{
acpi_native_uint i;
acpi_native_uint j;
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 589b98b..1ada017 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -59,8 +59,6 @@
#define ACPI_THERMAL_NOTIFY_CRITICAL 0xF0
#define ACPI_THERMAL_NOTIFY_HOT 0xF1
#define ACPI_THERMAL_MODE_ACTIVE 0x00
-#define ACPI_THERMAL_MODE_PASSIVE 0x01
-#define ACPI_THERMAL_MODE_CRITICAL 0xff
#define ACPI_THERMAL_PATH_POWEROFF "/sbin/poweroff"
#define ACPI_THERMAL_MAX_ACTIVE 10
@@ -86,9 +84,6 @@
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_thermal_write_trip_points(struct file *,
- const char __user *, size_t,
- loff_t *);
static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
static ssize_t acpi_thermal_write_cooling_mode(struct file *,
const char __user *, size_t,
@@ -167,7 +162,6 @@
unsigned long temperature;
unsigned long last_temperature;
unsigned long polling_frequency;
- u8 cooling_mode;
volatile u8 zombie;
struct acpi_thermal_flags flags;
struct acpi_thermal_state state;
@@ -193,7 +187,6 @@
static const struct file_operations acpi_thermal_trip_fops = {
.open = acpi_thermal_trip_open_fs,
.read = seq_read,
- .write = acpi_thermal_write_trip_points,
.llseek = seq_lseek,
.release = single_release,
};
@@ -297,11 +290,6 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- tz->cooling_mode = mode;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cooling mode [%s]\n",
- mode ? "passive" : "active"));
-
return 0;
}
@@ -889,67 +877,6 @@
return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data);
}
-static ssize_t
-acpi_thermal_write_trip_points(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * ppos)
-{
- struct seq_file *m = file->private_data;
- struct acpi_thermal *tz = m->private;
-
- char *limit_string;
- int num, critical, hot, passive;
- int *active;
- int i = 0;
-
-
- limit_string = kzalloc(ACPI_THERMAL_MAX_LIMIT_STR_LEN, GFP_KERNEL);
- if (!limit_string)
- return -ENOMEM;
-
- active = kmalloc(ACPI_THERMAL_MAX_ACTIVE * sizeof(int), GFP_KERNEL);
- if (!active) {
- kfree(limit_string);
- return -ENOMEM;
- }
-
- if (!tz || (count > ACPI_THERMAL_MAX_LIMIT_STR_LEN - 1)) {
- count = -EINVAL;
- goto end;
- }
-
- if (copy_from_user(limit_string, buffer, count)) {
- count = -EFAULT;
- goto end;
- }
-
- limit_string[count] = '\0';
-
- num = sscanf(limit_string, "%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d:%d",
- &critical, &hot, &passive,
- &active[0], &active[1], &active[2], &active[3], &active[4],
- &active[5], &active[6], &active[7], &active[8],
- &active[9]);
- if (!(num >= 5 && num < (ACPI_THERMAL_MAX_ACTIVE + 3))) {
- count = -EINVAL;
- goto end;
- }
-
- tz->trips.critical.temperature = CELSIUS_TO_KELVIN(critical);
- tz->trips.hot.temperature = CELSIUS_TO_KELVIN(hot);
- tz->trips.passive.temperature = CELSIUS_TO_KELVIN(passive);
- for (i = 0; i < num - 3; i++) {
- if (!(tz->trips.active[i].flags.valid))
- break;
- tz->trips.active[i].temperature = CELSIUS_TO_KELVIN(active[i]);
- }
-
- end:
- kfree(active);
- kfree(limit_string);
- return count;
-}
-
static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_thermal *tz = seq->private;
@@ -958,15 +885,10 @@
if (!tz)
goto end;
- if (!tz->flags.cooling_mode) {
+ if (!tz->flags.cooling_mode)
seq_puts(seq, "<setting not supported>\n");
- }
-
- if (tz->cooling_mode == ACPI_THERMAL_MODE_CRITICAL)
- seq_printf(seq, "cooling mode: critical\n");
else
- seq_printf(seq, "cooling mode: %s\n",
- tz->cooling_mode ? "passive" : "active");
+ seq_puts(seq, "0 - Active; 1 - Passive\n");
end:
return 0;
@@ -1223,28 +1145,6 @@
result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE);
if (!result)
tz->flags.cooling_mode = 1;
- else {
- /* Oh,we have not _SCP method.
- Generally show cooling_mode by _ACx, _PSV,spec 12.2 */
- tz->flags.cooling_mode = 0;
- if (tz->trips.active[0].flags.valid
- && tz->trips.passive.flags.valid) {
- if (tz->trips.passive.temperature >
- tz->trips.active[0].temperature)
- tz->cooling_mode = ACPI_THERMAL_MODE_ACTIVE;
- else
- tz->cooling_mode = ACPI_THERMAL_MODE_PASSIVE;
- } else if (!tz->trips.active[0].flags.valid
- && tz->trips.passive.flags.valid) {
- tz->cooling_mode = ACPI_THERMAL_MODE_PASSIVE;
- } else if (tz->trips.active[0].flags.valid
- && !tz->trips.passive.flags.valid) {
- tz->cooling_mode = ACPI_THERMAL_MODE_ACTIVE;
- } else {
- /* _ACx and _PSV are optional, but _CRT is required */
- tz->cooling_mode = ACPI_THERMAL_MODE_CRITICAL;
- }
- }
/* Get default polling frequency [_TZP] (optional) */
if (tzp)
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index 55a7648..6e56d5f 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -107,7 +107,6 @@
if (ACPI_FAILURE(status)) {
return (status);
}
-
#ifdef ACPI_DBG_TRACK_ALLOCATIONS
/* Memory allocation lists */
diff --git a/drivers/acpi/utilities/utcache.c b/drivers/acpi/utilities/utcache.c
index 870f6ed..285a0f5 100644
--- a/drivers/acpi/utilities/utcache.c
+++ b/drivers/acpi/utilities/utcache.c
@@ -45,7 +45,6 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utcache")
-
#ifdef ACPI_USE_LOCAL_CACHE
/*******************************************************************************
*
@@ -64,7 +63,7 @@
acpi_status
acpi_os_create_cache(char *cache_name,
u16 object_size,
- u16 max_depth, struct acpi_memory_list **return_cache)
+ u16 max_depth, struct acpi_memory_list ** return_cache)
{
struct acpi_memory_list *cache;
diff --git a/drivers/acpi/utilities/utcopy.c b/drivers/acpi/utilities/utcopy.c
index 84d529db..4c1e008 100644
--- a/drivers/acpi/utilities/utcopy.c
+++ b/drivers/acpi/utilities/utcopy.c
@@ -814,7 +814,9 @@
/*
* Create the object array
*/
- target_object->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size) source_object->package.count + 1) * sizeof(void *));
+ target_object->package.elements =
+ ACPI_ALLOCATE_ZEROED(((acpi_size) source_object->package.
+ count + 1) * sizeof(void *));
if (!target_object->package.elements) {
status = AE_NO_MEMORY;
goto error_exit;
diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c
index 61ad4f2..c7e128e 100644
--- a/drivers/acpi/utilities/utdebug.c
+++ b/drivers/acpi/utilities/utdebug.c
@@ -45,7 +45,6 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdebug")
-
#ifdef ACPI_DEBUG_OUTPUT
static acpi_thread_id acpi_gbl_prev_thread_id;
static char *acpi_gbl_fn_entry_str = "----Entry";
@@ -181,7 +180,8 @@
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
- (unsigned long)acpi_gbl_prev_thread_id, (unsigned long)thread_id);
+ (unsigned long)acpi_gbl_prev_thread_id,
+ (unsigned long)thread_id);
}
acpi_gbl_prev_thread_id = thread_id;
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index 673a0ca..f777ceb 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -170,6 +170,7 @@
acpi_os_delete_mutex(object->mutex.os_mutex);
acpi_gbl_global_lock_mutex = NULL;
} else {
+ acpi_ex_unlink_mutex(object);
acpi_os_delete_mutex(object->mutex.os_mutex);
}
break;
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index af33358..1621655 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -55,12 +55,10 @@
* Static global variable initialization.
*
******************************************************************************/
-
/*
* We want the debug switches statically initialized so they
* are already set when the debugger is entered.
*/
-
/* Debug switch - level and trace mask */
u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
@@ -735,5 +733,5 @@
}
ACPI_EXPORT_SYMBOL(acpi_dbg_level)
-ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
-ACPI_EXPORT_SYMBOL(acpi_gpe_count)
+ ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
+ ACPI_EXPORT_SYMBOL(acpi_gpe_count)
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
index 50133ff..2d19f71 100644
--- a/drivers/acpi/utilities/utmisc.c
+++ b/drivers/acpi/utilities/utmisc.c
@@ -802,9 +802,8 @@
valid_digits++;
- if (sign_of0x
- && ((valid_digits > 16)
- || ((valid_digits > 8) && mode32))) {
+ if (sign_of0x && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
/*
* This is to_integer operation case.
* No any restrictions for string-to-integer conversion,
@@ -1049,6 +1048,7 @@
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
}
+
EXPORT_SYMBOL(acpi_ut_exception);
void ACPI_INTERNAL_VAR_XFACE
diff --git a/drivers/acpi/utilities/utmutex.c b/drivers/acpi/utilities/utmutex.c
index cbad2ef..4820bc8 100644
--- a/drivers/acpi/utilities/utmutex.c
+++ b/drivers/acpi/utilities/utmutex.c
@@ -244,7 +244,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %lX attempting to acquire Mutex [%s]\n",
- (unsigned long) this_thread_id,
+ (unsigned long)this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
@@ -252,7 +252,7 @@
if (ACPI_SUCCESS(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %lX acquired Mutex [%s]\n",
- (unsigned long) this_thread_id,
+ (unsigned long)this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
acpi_gbl_mutex_info[mutex_id].use_count++;
@@ -260,7 +260,7 @@
} else {
ACPI_EXCEPTION((AE_INFO, status,
"Thread %lX could not acquire Mutex [%X]",
- (unsigned long) this_thread_id, mutex_id));
+ (unsigned long)this_thread_id, mutex_id));
}
return (status);
@@ -287,7 +287,7 @@
this_thread_id = acpi_os_get_thread_id();
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Thread %lX releasing Mutex [%s]\n",
- (unsigned long) this_thread_id,
+ (unsigned long)this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c
index e8fe1ba..cbbd331 100644
--- a/drivers/acpi/utilities/utresrc.c
+++ b/drivers/acpi/utilities/utresrc.c
@@ -46,7 +46,6 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utresrc")
-
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
/*
* Strings used to decode resource descriptors.
diff --git a/drivers/acpi/utilities/utxface.c b/drivers/acpi/utilities/utxface.c
index de3276f..e9a5780 100644
--- a/drivers/acpi/utilities/utxface.c
+++ b/drivers/acpi/utilities/utxface.c
@@ -337,7 +337,6 @@
}
ACPI_EXPORT_SYMBOL(acpi_terminate)
-
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
@@ -470,7 +469,6 @@
ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
#endif /* ACPI_FUTURE_USAGE */
-
/*****************************************************************************
*
* FUNCTION: acpi_purge_cached_objects
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c721966..ad1f59c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -2,10 +2,9 @@
# SATA/PATA driver configuration
#
-menu "Serial ATA (prod) and Parallel ATA (experimental) drivers"
-
-config ATA
- tristate "ATA device support"
+menuconfig ATA
+ tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+ depends on HAS_IOMEM
depends on BLOCK
depends on !(M32R || M68K) || BROKEN
depends on !SUN4 || BROKEN
@@ -23,6 +22,19 @@
bool
default n
+config ATA_ACPI
+ bool
+ depends on ACPI && PCI
+ default y
+ help
+ This option adds support for ATA-related ACPI objects.
+ These ACPI objects add the ability to retrieve taskfiles
+ from the ACPI BIOS and write them to the disk controller.
+ These objects may be related to performance, security,
+ power management, or other areas.
+ You can disable this at kernel boot time by using the
+ option libata.noacpi=1
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
@@ -156,19 +168,6 @@
help
This option enables support for Initio 162x Serial ATA.
-config SATA_ACPI
- bool
- depends on ACPI && PCI
- default y
- help
- This option adds support for SATA-related ACPI objects.
- These ACPI objects add the ability to retrieve taskfiles
- from the ACPI BIOS and write them to the disk controller.
- These objects may be related to performance, security,
- power management, or other areas.
- You can disable this at kernel boot time by using the
- option libata.noacpi=1
-
config PATA_ALI
tristate "ALi PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@@ -584,6 +583,4 @@
If unsure, say N.
-endif
-endmenu
-
+endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6f42a0e..8149c68 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -69,4 +69,4 @@
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o
-libata-$(CONFIG_SATA_ACPI) += libata-acpi.o
+libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index d961789..1ae443d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -250,10 +250,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations ahci_ops = {
@@ -400,6 +396,7 @@
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 */
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 92a491d..c3d7532 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -54,7 +54,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_ready(dev)) {
+ if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
@@ -90,10 +90,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations generic_port_ops = {
@@ -145,7 +141,7 @@
static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
u16 command;
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &generic_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -153,7 +149,7 @@
.udma_mask = 0x3f,
.port_ops = &generic_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
/* Don't use the generic entry unless instructed to do so */
if (id->driver_data == 1 && all_generic_ide == 0)
@@ -179,7 +175,7 @@
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_clear_simplex(dev);
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 4a795fd..13b6b1d 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -275,10 +275,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations piix_pata_ops = {
@@ -1034,7 +1030,7 @@
static int printed_version;
struct device *dev = &pdev->dev;
struct ata_port_info port_info[2];
- struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] };
+ const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
struct piix_host_priv *hpriv;
unsigned long port_flags;
@@ -1093,7 +1089,7 @@
port_info[1].mwdma_mask = 0;
port_info[1].udma_mask = 0;
}
- return ata_pci_init_one(pdev, ppinfo, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static int __init piix_init(void)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index cb3eab6..ed4138e 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -270,8 +270,7 @@
/**
* do_drive_get_GTF - get the drive bootup default taskfile settings
- * @ap: the ata_port for the drive
- * @ix: target ata_device (drive) index
+ * @dev: target ATA device
* @gtf_length: number of bytes of _GTF data returned at @gtf_address
* @gtf_address: buffer containing _GTF taskfile arrays
*
@@ -286,20 +285,19 @@
* The returned @gtf_length and @gtf_address are only valid if the
* function return value is 0.
*/
-static int do_drive_get_GTF(struct ata_port *ap, int ix,
- unsigned int *gtf_length, unsigned long *gtf_address,
- unsigned long *obj_loc)
+static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
+ unsigned long *gtf_address, unsigned long *obj_loc)
{
- acpi_status status;
- acpi_handle dev_handle = NULL;
- acpi_handle chan_handle, drive_handle;
- acpi_integer pcidevfn = 0;
- u32 dev_adr;
- struct acpi_buffer output;
- union acpi_object *out_obj;
- struct device *dev = ap->host->dev;
- struct ata_device *atadev = &ap->device[ix];
- int err = -ENODEV;
+ struct ata_port *ap = dev->ap;
+ acpi_status status;
+ acpi_handle dev_handle = NULL;
+ acpi_handle chan_handle, drive_handle;
+ acpi_integer pcidevfn = 0;
+ u32 dev_adr;
+ struct acpi_buffer output;
+ union acpi_object *out_obj;
+ struct device *gdev = ap->host->dev;
+ int err = -ENODEV;
*gtf_length = 0;
*gtf_address = 0UL;
@@ -309,14 +307,14 @@
return 0;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
__FUNCTION__, ap->port_no);
- if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) {
+ if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: ERR: "
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ERR: "
"ata_dev_present: %d, PORT_DISABLED: %lu\n",
- __FUNCTION__, ata_dev_enabled(atadev),
+ __FUNCTION__, ata_dev_enabled(dev),
ap->flags & ATA_FLAG_DISABLED);
goto out;
}
@@ -324,19 +322,19 @@
/* Don't continue if device has no _ADR method.
* _GTF is intended for known motherboard devices. */
if (!(ap->cbl == ATA_CBL_SATA)) {
- err = pata_get_dev_handle(dev, &dev_handle, &pcidevfn);
+ err = pata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
if (err < 0) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: pata_get_dev_handle failed (%d)\n",
__FUNCTION__, err);
goto out;
}
} else {
- err = sata_get_dev_handle(dev, &dev_handle, &pcidevfn);
+ err = sata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
if (err < 0) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: sata_get_dev_handle failed (%d\n",
__FUNCTION__, err);
goto out;
@@ -344,7 +342,7 @@
}
/* Get this drive's _ADR info. if not already known. */
- if (!atadev->obj_handle) {
+ if (!dev->obj_handle) {
if (!(ap->cbl == ATA_CBL_SATA)) {
/* get child objects of dev_handle == channel objects,
* + _their_ children == drive objects */
@@ -352,7 +350,7 @@
chan_handle = acpi_get_child(dev_handle,
ap->port_no);
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: chan adr=%d: chan_handle=0x%p\n",
__FUNCTION__, ap->port_no,
chan_handle);
@@ -361,26 +359,26 @@
goto out;
}
/* TBD: could also check ACPI object VALID bits */
- drive_handle = acpi_get_child(chan_handle, ix);
+ drive_handle = acpi_get_child(chan_handle, dev->devno);
if (!drive_handle) {
err = -ENODEV;
goto out;
}
- dev_adr = ix;
- atadev->obj_handle = drive_handle;
+ dev_adr = dev->devno;
+ dev->obj_handle = drive_handle;
} else { /* for SATA mode */
dev_adr = SATA_ADR_RSVD;
- err = get_sata_adr(dev, dev_handle, pcidevfn, 0,
- ap, atadev, &dev_adr);
+ err = get_sata_adr(gdev, dev_handle, pcidevfn, 0,
+ ap, dev, &dev_adr);
}
if (err < 0 || dev_adr == SATA_ADR_RSVD ||
- !atadev->obj_handle) {
+ !dev->obj_handle) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: get_sata/pata_adr failed: "
"err=%d, dev_adr=%u, obj_handle=0x%p\n",
__FUNCTION__, err, dev_adr,
- atadev->obj_handle);
+ dev->obj_handle);
goto out;
}
}
@@ -391,11 +389,11 @@
/* _GTF has no input parameters */
err = -EIO;
- status = acpi_evaluate_object(atadev->obj_handle, "_GTF",
+ status = acpi_evaluate_object(dev->obj_handle, "_GTF",
NULL, &output);
if (ACPI_FAILURE(status)) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: Run _GTF error: status = 0x%x\n",
__FUNCTION__, status);
goto out;
@@ -403,7 +401,7 @@
if (!output.length || !output.pointer) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: "
+ ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
"length or ptr is NULL (0x%llx, 0x%p)\n",
__FUNCTION__,
(unsigned long long)output.length,
@@ -416,7 +414,7 @@
if (out_obj->type != ACPI_TYPE_BUFFER) {
kfree(output.pointer);
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: "
+ ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
"error: expected object type of "
" ACPI_TYPE_BUFFER, got 0x%x\n",
__FUNCTION__, out_obj->type);
@@ -427,7 +425,7 @@
if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
out_obj->buffer.length % REGS_PER_GTF) {
if (ata_msg_drv(ap))
- ata_dev_printk(atadev, KERN_ERR,
+ ata_dev_printk(dev, KERN_ERR,
"%s: unexpected GTF length (%d) or addr (0x%p)\n",
__FUNCTION__, out_obj->buffer.length,
out_obj->buffer.pointer);
@@ -439,7 +437,7 @@
*gtf_address = (unsigned long)out_obj->buffer.pointer;
*obj_loc = (unsigned long)out_obj;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: returning "
+ ata_dev_printk(dev, KERN_DEBUG, "%s: returning "
"gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
__FUNCTION__, *gtf_length, *gtf_address, *obj_loc);
err = 0;
@@ -449,7 +447,7 @@
/**
* taskfile_load_raw - send taskfile registers to host controller
- * @ap: Port to which output is sent
+ * @dev: target ATA device
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
*
* Outputs ATA taskfile to standard ATA host controller using MMIO
@@ -466,15 +464,15 @@
* LOCKING: TBD:
* Inherited from caller.
*/
-static void taskfile_load_raw(struct ata_port *ap,
- struct ata_device *atadev,
- const struct taskfile_array *gtf)
+static void taskfile_load_raw(struct ata_device *dev,
+ const struct taskfile_array *gtf)
{
+ struct ata_port *ap = dev->ap;
struct ata_taskfile tf;
unsigned int err;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
+ ata_dev_printk(dev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
"%02x %02x %02x %02x %02x %02x %02x\n",
__FUNCTION__,
gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
@@ -485,7 +483,7 @@
&& (gtf->tfa[6] == 0))
return;
- ata_tf_init(atadev, &tf);
+ ata_tf_init(dev, &tf);
/* convert gtf to tf */
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
@@ -498,17 +496,16 @@
tf.device = gtf->tfa[5]; /* 0x1f6 */
tf.command = gtf->tfa[6]; /* 0x1f7 */
- err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0);
+ err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
if (err && ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_ERR,
+ ata_dev_printk(dev, KERN_ERR,
"%s: ata_exec_internal failed: %u\n",
__FUNCTION__, err);
}
/**
* do_drive_set_taskfiles - write the drive taskfile settings from _GTF
- * @ap: the ata_port for the drive
- * @atadev: target ata_device
+ * @dev: target ATA device
* @gtf_length: total number of bytes of _GTF taskfiles
* @gtf_address: location of _GTF taskfile arrays
*
@@ -517,30 +514,31 @@
* Write {gtf_address, length gtf_length} in groups of
* REGS_PER_GTF bytes.
*/
-static int do_drive_set_taskfiles(struct ata_port *ap,
- struct ata_device *atadev, unsigned int gtf_length,
- unsigned long gtf_address)
+static int do_drive_set_taskfiles(struct ata_device *dev,
+ unsigned int gtf_length,
+ unsigned long gtf_address)
{
- int err = -ENODEV;
- int gtf_count = gtf_length / REGS_PER_GTF;
- int ix;
+ struct ata_port *ap = dev->ap;
+ int err = -ENODEV;
+ int gtf_count = gtf_length / REGS_PER_GTF;
+ int ix;
struct taskfile_array *gtf;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
__FUNCTION__, ap->port_no);
if (libata_noacpi || !(ap->cbl == ATA_CBL_SATA))
return 0;
- if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED))
+ if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))
goto out;
if (!gtf_count) /* shouldn't be here */
goto out;
if (gtf_length % REGS_PER_GTF) {
if (ata_msg_drv(ap))
- ata_dev_printk(atadev, KERN_ERR,
+ ata_dev_printk(dev, KERN_ERR,
"%s: unexpected GTF length (%d)\n",
__FUNCTION__, gtf_length);
goto out;
@@ -551,7 +549,7 @@
(gtf_address + ix * REGS_PER_GTF);
/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
- taskfile_load_raw(ap, atadev, gtf);
+ taskfile_load_raw(dev, gtf);
}
err = 0;
@@ -567,11 +565,11 @@
*/
int ata_acpi_exec_tfs(struct ata_port *ap)
{
- int ix;
- int ret =0;
- unsigned int gtf_length;
- unsigned long gtf_address;
- unsigned long obj_loc;
+ int ix;
+ int ret = 0;
+ unsigned int gtf_length;
+ unsigned long gtf_address;
+ unsigned long obj_loc;
if (libata_noacpi)
return 0;
@@ -584,11 +582,13 @@
return 0;
for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
- if (!ata_dev_enabled(&ap->device[ix]))
+ struct ata_device *dev = &ap->device[ix];
+
+ if (!ata_dev_enabled(dev))
continue;
- ret = do_drive_get_GTF(ap, ix,
- >f_length, >f_address, &obj_loc);
+ ret = do_drive_get_GTF(dev, >f_length, >f_address,
+ &obj_loc);
if (ret < 0) {
if (ata_msg_probe(ap))
ata_port_printk(ap, KERN_DEBUG,
@@ -597,8 +597,7 @@
break;
}
- ret = do_drive_set_taskfiles(ap, &ap->device[ix],
- gtf_length, gtf_address);
+ ret = do_drive_set_taskfiles(dev, gtf_length, gtf_address);
kfree((void *)obj_loc);
if (ret < 0) {
if (ata_msg_probe(ap))
@@ -614,8 +613,7 @@
/**
* ata_acpi_push_id - send Identify data to drive
- * @ap: the ata_port for the drive
- * @ix: drive index
+ * @dev: target ATA device
*
* _SDD ACPI object: for SATA mode only
* Must be after Identify (Packet) Device -- uses its data
@@ -623,57 +621,57 @@
* method and if it fails for whatever reason, we should still
* just keep going.
*/
-int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+int ata_acpi_push_id(struct ata_device *dev)
{
- acpi_handle handle;
- acpi_integer pcidevfn;
- int err;
- struct device *dev = ap->host->dev;
- struct ata_device *atadev = &ap->device[ix];
- u32 dev_adr;
- acpi_status status;
- struct acpi_object_list input;
- union acpi_object in_params[1];
+ struct ata_port *ap = dev->ap;
+ acpi_handle handle;
+ acpi_integer pcidevfn;
+ int err;
+ struct device *gdev = ap->host->dev;
+ u32 dev_adr;
+ acpi_status status;
+ struct acpi_object_list input;
+ union acpi_object in_params[1];
if (libata_noacpi)
return 0;
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
- __FUNCTION__, ix, ap->port_no);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
+ __FUNCTION__, dev->devno, ap->port_no);
/* Don't continue if not a SATA device. */
if (!(ap->cbl == ATA_CBL_SATA)) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: Not a SATA device\n", __FUNCTION__);
goto out;
}
/* Don't continue if device has no _ADR method.
* _SDD is intended for known motherboard devices. */
- err = sata_get_dev_handle(dev, &handle, &pcidevfn);
+ err = sata_get_dev_handle(gdev, &handle, &pcidevfn);
if (err < 0) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: sata_get_dev_handle failed (%d\n",
__FUNCTION__, err);
goto out;
}
/* Get this drive's _ADR info, if not already known */
- if (!atadev->obj_handle) {
+ if (!dev->obj_handle) {
dev_adr = SATA_ADR_RSVD;
- err = get_sata_adr(dev, handle, pcidevfn, ix, ap, atadev,
+ err = get_sata_adr(gdev, handle, pcidevfn, dev->devno, ap, dev,
&dev_adr);
if (err < 0 || dev_adr == SATA_ADR_RSVD ||
- !atadev->obj_handle) {
+ !dev->obj_handle) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s: get_sata_adr failed: "
"err=%d, dev_adr=%u, obj_handle=0x%p\n",
__FUNCTION__, err, dev_adr,
- atadev->obj_handle);
+ dev->obj_handle);
goto out;
}
}
@@ -683,19 +681,19 @@
input.count = 1;
input.pointer = in_params;
in_params[0].type = ACPI_TYPE_BUFFER;
- in_params[0].buffer.length = sizeof(atadev->id[0]) * ATA_ID_WORDS;
- in_params[0].buffer.pointer = (u8 *)atadev->id;
+ in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS;
+ in_params[0].buffer.pointer = (u8 *)dev->id;
/* Output buffer: _SDD has no output */
/* It's OK for _SDD to be missing too. */
- swap_buf_le16(atadev->id, ATA_ID_WORDS);
- status = acpi_evaluate_object(atadev->obj_handle, "_SDD", &input, NULL);
- swap_buf_le16(atadev->id, ATA_ID_WORDS);
+ swap_buf_le16(dev->id, ATA_ID_WORDS);
+ status = acpi_evaluate_object(dev->obj_handle, "_SDD", &input, NULL);
+ swap_buf_le16(dev->id, ATA_ID_WORDS);
err = ACPI_FAILURE(status) ? -EIO : 0;
if (err < 0) {
if (ata_msg_probe(ap))
- ata_dev_printk(atadev, KERN_DEBUG,
+ ata_dev_printk(dev, KERN_DEBUG,
"%s _SDD error: status = 0x%x\n",
__FUNCTION__, status);
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4595d1f..4166407 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -101,6 +101,12 @@
module_param_named(noacpi, libata_noacpi, int, 0444);
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
+int ata_spindown_compat = 1;
+module_param_named(spindown_compat, ata_spindown_compat, int, 0644);
+MODULE_PARM_DESC(spindown_compat, "Enable backward compatible spindown "
+ "behavior. Will be removed. More info can be found in "
+ "Documentation/feature-removal-schedule.txt\n");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
@@ -1654,7 +1660,7 @@
struct ata_taskfile tf;
unsigned int err_mask = 0;
const char *reason;
- int tried_spinup = 0;
+ int may_fallback = 1, tried_spinup = 0;
int rc;
if (ata_msg_ctl(ap))
@@ -1698,11 +1704,31 @@
return -ENOENT;
}
+ /* Device or controller might have reported the wrong
+ * device class. Give a shot at the other IDENTIFY if
+ * the current one is aborted by the device.
+ */
+ if (may_fallback &&
+ (err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ may_fallback = 0;
+
+ if (class == ATA_DEV_ATA)
+ class = ATA_DEV_ATAPI;
+ else
+ class = ATA_DEV_ATA;
+ goto retry;
+ }
+
rc = -EIO;
reason = "I/O error";
goto err_out;
}
+ /* Falling back doesn't make sense if ID data was read
+ * successfully at least once.
+ */
+ may_fallback = 0;
+
swap_buf_le16(id, ATA_ID_WORDS);
/* sanity check */
@@ -1843,7 +1869,7 @@
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
/* set _SDD */
- rc = ata_acpi_push_id(ap, dev->devno);
+ rc = ata_acpi_push_id(dev);
if (rc) {
ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n",
rc);
@@ -2860,7 +2886,7 @@
dev = &ap->device[i];
/* don't update suspended devices' xfer mode */
- if (!ata_dev_ready(dev))
+ if (!ata_dev_enabled(dev))
continue;
rc = ata_dev_set_mode(dev);
@@ -5845,37 +5871,11 @@
*/
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
{
- int i, j, rc;
+ int rc;
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
- if (rc)
- goto fail;
-
- /* EH is quiescent now. Fail if we have any ready device.
- * This happens if hotplug occurs between completion of device
- * suspension and here.
- */
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- for (j = 0; j < ATA_MAX_DEVICES; j++) {
- struct ata_device *dev = &ap->device[j];
-
- if (ata_dev_ready(dev)) {
- ata_port_printk(ap, KERN_WARNING,
- "suspend failed, device %d "
- "still active\n", dev->devno);
- rc = -EBUSY;
- goto fail;
- }
- }
- }
-
- host->dev->power.power_state = mesg;
- return 0;
-
- fail:
- ata_host_resume(host);
+ if (rc == 0)
+ host->dev->power.power_state = mesg;
return rc;
}
@@ -5984,6 +5984,7 @@
if (!ap)
return NULL;
+ ap->pflags |= ATA_PFLAG_INITIALIZING;
ap->lock = &host->lock;
ap->flags = ATA_FLAG_DISABLED;
ap->print_id = -1;
@@ -6352,6 +6353,7 @@
ehi->action |= ATA_EH_SOFTRESET;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+ ap->pflags &= ~ATA_PFLAG_INITIALIZING;
ap->pflags |= ATA_PFLAG_LOADING;
ata_port_schedule_eh(ap);
@@ -6876,6 +6878,7 @@
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
@@ -6889,11 +6892,6 @@
EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PM
-EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
-EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
-#endif /* CONFIG_PM */
-
EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
EXPORT_SYMBOL_GPL(ata_port_abort);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8256655..5309c31 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -77,29 +77,12 @@
#ifdef CONFIG_PM
static void ata_eh_handle_port_suspend(struct ata_port *ap);
static void ata_eh_handle_port_resume(struct ata_port *ap);
-static int ata_eh_suspend(struct ata_port *ap,
- struct ata_device **r_failed_dev);
-static void ata_eh_prep_resume(struct ata_port *ap);
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev);
#else /* CONFIG_PM */
static void ata_eh_handle_port_suspend(struct ata_port *ap)
{ }
static void ata_eh_handle_port_resume(struct ata_port *ap)
{ }
-
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- return 0;
-}
-
-static void ata_eh_prep_resume(struct ata_port *ap)
-{ }
-
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- return 0;
-}
#endif /* CONFIG_PM */
static void ata_ering_record(struct ata_ering *ering, int is_io,
@@ -568,6 +551,9 @@
{
WARN_ON(!ap->ops->error_handler);
+ if (ap->pflags & ATA_PFLAG_INITIALIZING)
+ return;
+
ap->pflags |= ATA_PFLAG_EH_PENDING;
scsi_schedule_eh(ap->scsi_host);
@@ -1791,7 +1777,7 @@
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
- if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
+ if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
goto err;
@@ -1872,166 +1858,6 @@
return rc;
}
-#ifdef CONFIG_PM
-/**
- * ata_eh_suspend - handle suspend EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle suspend EH action. Disk devices are spinned down and
- * other types of devices are just marked suspended. Once
- * suspended, no EH action to the device is allowed until it is
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned long flags;
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
- continue;
-
- WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
-
- ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- /* flush cache */
- rc = ata_flush_cache(dev);
- if (rc)
- break;
-
- /* spin down */
- err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin down (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags |= ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_eh_done(ap, dev, ATA_EH_SUSPEND);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return rc;
-}
-
-/**
- * ata_eh_prep_resume - prep for resume EH action
- * @ap: target host port
- *
- * Clear SUSPENDED in preparation for scheduled resume actions.
- * This allows other parts of EH to access the devices being
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- */
-static void ata_eh_prep_resume(struct ata_port *ap)
-{
- struct ata_device *dev;
- unsigned long flags;
- int i;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags &= ~ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
- }
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eh_resume - handle resume EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle resume EH action. Target devices are already reset and
- * revalidated. Spinning up is the only operation left.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- err_mask = ata_do_simple_cmd(dev,
- ATA_CMD_IDLEIMMEDIATE);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin up (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- ata_eh_done(ap, dev, ATA_EH_RESUME);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return 0;
-}
-#endif /* CONFIG_PM */
-
static int ata_port_nr_enabled(struct ata_port *ap)
{
int i, cnt = 0;
@@ -2057,17 +1883,6 @@
struct ata_eh_context *ehc = &ap->eh_context;
int i;
- /* skip if all possible devices are suspended */
- for (i = 0; i < ata_port_max_devices(ap); i++) {
- struct ata_device *dev = &ap->device[i];
-
- if (!(dev->flags & ATA_DFLAG_SUSPENDED))
- break;
- }
-
- if (i == ata_port_max_devices(ap))
- return 1;
-
/* thaw frozen port, resume link and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) ||
(ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
@@ -2147,9 +1962,6 @@
if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
- /* prep for resume */
- ata_eh_prep_resume(ap);
-
/* skip EH if possible. */
if (ata_eh_skip_recovery(ap))
ehc->i.action = 0;
@@ -2177,11 +1989,6 @@
if (rc)
goto dev_fail;
- /* resume devices */
- rc = ata_eh_resume(ap, &dev);
- if (rc)
- goto dev_fail;
-
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
@@ -2190,25 +1997,16 @@
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
- /* suspend devices */
- rc = ata_eh_suspend(ap, &dev);
- if (rc)
- goto dev_fail;
-
goto out;
dev_fail:
ehc->tries[dev->devno]--;
switch (rc) {
- case -EINVAL:
- /* eeek, something went very wrong, give up */
- ehc->tries[dev->devno] = 0;
- break;
-
case -ENODEV:
/* device missing or wrong IDENTIFY data, schedule probing */
ehc->i.probe_mask |= (1 << dev->devno);
+ case -EINVAL:
/* give it just one more chance */
ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
@@ -2390,22 +2188,13 @@
*
* Resume @ap.
*
- * This function also waits upto one second until all devices
- * hanging off this port requests resume EH action. This is to
- * prevent invoking EH and thus reset multiple times on resume.
- *
- * On DPM resume, where some of devices might not be resumed
- * together, this may delay port resume upto one second, but such
- * DPM resumes are rare and 1 sec delay isn't too bad.
- *
* LOCKING:
* Kernel thread context (may sleep).
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
- unsigned long timeout;
unsigned long flags;
- int i, rc = 0;
+ int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
@@ -2416,31 +2205,12 @@
}
spin_unlock_irqrestore(ap->lock, flags);
- /* spurious? */
- if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
- goto done;
+ WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
- /* give devices time to request EH */
- timeout = jiffies + HZ; /* 1s max */
- while (1) {
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
- unsigned int action = ata_eh_dev_action(dev);
-
- if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
- !(action & ATA_EH_RESUME))
- break;
- }
-
- if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
- break;
- msleep(10);
- }
-
- done:
+ /* report result */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
if (ap->pm_result) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 9afba2b..dd81fa7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -510,133 +510,6 @@
}
}
-#ifdef CONFIG_PM
-/**
- * ata_scsi_device_suspend - suspend ATA device associated with sdev
- * @sdev: the SCSI device to suspend
- * @mesg: target power management message
- *
- * Request suspend EH action on the ATA device associated with
- * @sdev and wait for the operation to complete.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- unsigned long flags;
- unsigned int action;
- int rc = 0;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* wait for the previous resume to complete */
- while (dev->flags & ATA_DFLAG_SUSPENDED) {
- spin_unlock_irqrestore(ap->lock, flags);
- ata_port_wait_eh(ap);
- spin_lock_irqsave(ap->lock, flags);
- }
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request suspend */
- action = ATA_EH_SUSPEND;
- if (mesg.event != PM_EVENT_SUSPEND)
- action |= ATA_EH_PM_FREEZE;
- ap->eh_info.dev_action[dev->devno] |= action;
- ap->eh_info.flags |= ATA_EHI_QUIET;
- ata_port_schedule_eh(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* wait for EH to do the job */
- ata_port_wait_eh(ap);
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* If @sdev is still attached but the associated ATA device
- * isn't suspended, the operation failed.
- */
- if (sdev->sdev_state != SDEV_OFFLINE &&
- sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
- !(dev->flags & ATA_DFLAG_SUSPENDED))
- rc = -EIO;
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- if (rc == 0)
- sdev->sdev_gendev.power.power_state = mesg;
- return rc;
-}
-
-/**
- * ata_scsi_device_resume - resume ATA device associated with sdev
- * @sdev: the SCSI device to resume
- *
- * Request resume EH action on the ATA device associated with
- * @sdev and return immediately. This enables parallel
- * wakeup/spinup of devices.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0.
- */
-int ata_scsi_device_resume(struct scsi_device *sdev)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- struct ata_eh_info *ehi = &ap->eh_info;
- unsigned long flags;
- unsigned int action;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request resume */
- action = ATA_EH_RESUME;
- if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
- __ata_ehi_hotplugged(ehi);
- else
- action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
- ehi->dev_action[dev->devno] |= action;
-
- /* We don't want autopsy and verbose EH messages. Disable
- * those if we're the only device on this link.
- */
- if (ata_port_max_devices(ap) == 1)
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
-
- ata_port_schedule_eh(ap);
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- sdev->sdev_gendev.power.power_state = PMSG_ON;
- return 0;
-}
-#endif /* CONFIG_PM */
-
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
@@ -929,6 +802,8 @@
blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
+ sdev->manage_start_stop = 1;
+
if (dev)
ata_scsi_dev_config(sdev, dev);
@@ -1069,9 +944,35 @@
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else
+ } else {
+ /* XXX: This is for backward compatibility, will be
+ * removed. Read Documentation/feature-removal-schedule.txt
+ * for more info.
+ */
+ if (ata_spindown_compat &&
+ (system_state == SYSTEM_HALT ||
+ system_state == SYSTEM_POWER_OFF)) {
+ static int warned = 0;
+
+ if (!warned) {
+ spin_unlock_irq(qc->ap->lock);
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "DISK MIGHT NOT BE SPUN DOWN PROPERLY. "
+ "UPDATE SHUTDOWN UTILITY\n");
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "For more info, visit "
+ "http://linux-ata.org/shutdown.html\n");
+ warned = 1;
+ ssleep(5);
+ spin_lock_irq(qc->ap->lock);
+ }
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+ }
+
/* Issue ATA STANDBY IMMEDIATE command */
tf->command = ATA_CMD_STANDBYNOW1;
+ }
/*
* Standby and Idle condition timers could be implemented but that
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index d211db6..e35d134 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -544,7 +544,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-static int ata_pci_init_bmdma(struct ata_host *host)
+int ata_pci_init_bmdma(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
@@ -566,7 +566,7 @@
}
host->iomap = pcim_iomap_table(pdev);
- for (i = 0; i < host->n_ports; i++) {
+ for (i = 0; i < 2; i++) {
struct ata_port *ap = host->ports[i];
void __iomem *bmdma = host->iomap[4] + 8 * i;
@@ -585,54 +585,52 @@
/**
* ata_pci_init_native_host - acquire native ATA resources and init host
* @host: target ATA host
- * @port_mask: ports to consider
*
- * Acquire native PCI ATA resources for @host and initialize
- * @host accordoingly.
+ * Acquire native PCI ATA resources for @host and initialize the
+ * first two ports of @host accordingly. Ports marked dummy are
+ * skipped and allocation failure makes the port dummy.
*
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
- * 0 on success, -errno otherwise.
+ * 0 if at least one port is initialized, -ENODEV if no port is
+ * available.
*/
-int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask)
+int ata_pci_init_native_host(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
+ unsigned int mask = 0;
int i, rc;
- /* Discard disabled ports. Some controllers show their unused
- * channels this way. Disabled ports are made dummy.
- */
- for (i = 0; i < 2; i++) {
- if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) {
- host->ports[i]->ops = &ata_dummy_port_ops;
- port_mask &= ~(1 << i);
- }
- }
-
- if (!port_mask) {
- dev_printk(KERN_ERR, gdev, "no available port\n");
- return -ENODEV;
- }
-
/* request, iomap BARs and init port addresses accordingly */
for (i = 0; i < 2; i++) {
struct ata_port *ap = host->ports[i];
int base = i * 2;
void __iomem * const *iomap;
- if (!(port_mask & (1 << i)))
+ if (ata_port_is_dummy(ap))
continue;
+ /* Discard disabled ports. Some controllers show
+ * their unused channels this way. Disabled ports are
+ * made dummy.
+ */
+ if (!ata_resources_present(pdev, i)) {
+ ap->ops = &ata_dummy_port_ops;
+ continue;
+ }
+
rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME);
if (rc) {
- dev_printk(KERN_ERR, gdev, "failed to request/iomap "
- "BARs for port %d (errno=%d)\n", i, rc);
+ dev_printk(KERN_WARNING, gdev,
+ "failed to request/iomap BARs for port %d "
+ "(errno=%d)\n", i, rc);
if (rc == -EBUSY)
pcim_pin_device(pdev);
- return rc;
+ ap->ops = &ata_dummy_port_ops;
+ continue;
}
host->iomap = iomap = pcim_iomap_table(pdev);
@@ -641,6 +639,13 @@
ap->ioaddr.ctl_addr = (void __iomem *)
((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
ata_std_ports(&ap->ioaddr);
+
+ mask |= 1 << i;
+ }
+
+ if (!mask) {
+ dev_printk(KERN_ERR, gdev, "no available native port\n");
+ return -ENODEV;
}
return 0;
@@ -649,8 +654,7 @@
/**
* ata_pci_prepare_native_host - helper to prepare native PCI ATA host
* @pdev: target PCI device
- * @ppi: array of port_info
- * @n_ports: number of ports to allocate
+ * @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
*
* Helper to allocate ATA host for @pdev, acquire all native PCI
@@ -664,10 +668,9 @@
*/
int ata_pci_prepare_native_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
- int n_ports, struct ata_host **r_host)
+ struct ata_host **r_host)
{
struct ata_host *host;
- unsigned int port_mask;
int rc;
if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
@@ -681,11 +684,7 @@
goto err_out;
}
- port_mask = ATA_PORT_PRIMARY;
- if (n_ports > 1)
- port_mask |= ATA_PORT_SECONDARY;
-
- rc = ata_pci_init_native_host(host, port_mask);
+ rc = ata_pci_init_native_host(host);
if (rc)
goto err_out;
@@ -777,8 +776,11 @@
/* iomap cmd and ctl ports */
legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
- if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no])
+ if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) {
+ dev_printk(KERN_WARNING, host->dev,
+ "failed to map cmd/ctl ports\n");
return -ENOMEM;
+ }
/* init IO addresses */
ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
@@ -792,19 +794,20 @@
/**
* ata_init_legacy_host - acquire legacy ATA resources and init ATA host
* @host: target ATA host
- * @legacy_mask: out parameter, mask indicating ports is in legacy mode
* @was_busy: out parameter, indicates whether any port was busy
*
- * Acquire legacy ATA resources for ports.
+ * Acquire legacy ATA resources for the first two ports of @host
+ * and initialize it accordingly. Ports marked dummy are skipped
+ * and resource acquistion failure makes the port dummy.
*
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
- * 0 on success, -errno otherwise.
+ * 0 if at least one port is initialized, -ENODEV if no port is
+ * available.
*/
-static int ata_init_legacy_host(struct ata_host *host,
- unsigned int *legacy_mask, int *was_busy)
+static int ata_init_legacy_host(struct ata_host *host, int *was_busy)
{
struct device *gdev = host->dev;
struct ata_legacy_devres *legacy_dr;
@@ -821,22 +824,23 @@
devres_add(gdev, legacy_dr);
for (i = 0; i < 2; i++) {
- *legacy_mask &= ~(1 << i);
+ if (ata_port_is_dummy(host->ports[i]))
+ continue;
+
rc = ata_init_legacy_port(host->ports[i], legacy_dr);
if (rc == 0)
legacy_dr->mask |= 1 << i;
- else if (rc == -EBUSY)
- (*was_busy)++;
+ else {
+ if (rc == -EBUSY)
+ (*was_busy)++;
+ host->ports[i]->ops = &ata_dummy_port_ops;
+ }
}
- if (!legacy_dr->mask)
- return -EBUSY;
-
- for (i = 0; i < 2; i++)
- if (!(legacy_dr->mask & (1 << i)))
- host->ports[i]->ops = &ata_dummy_port_ops;
-
- *legacy_mask |= legacy_dr->mask;
+ if (!legacy_dr->mask) {
+ dev_printk(KERN_ERR, gdev, "no available legacy port\n");
+ return -ENODEV;
+ }
devres_remove_group(gdev, NULL);
return 0;
@@ -875,7 +879,7 @@
legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
BUG_ON(!legacy_dr);
- for (i = 0; i < host->n_ports; i++) {
+ for (i = 0; i < 2; i++) {
unsigned int irq;
/* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
@@ -923,8 +927,7 @@
/**
* ata_pci_init_one - Initialize/register PCI IDE host controller
* @pdev: Controller to be initialized
- * @port_info: Information from low-level host driver
- * @n_ports: Number of ports attached to host controller
+ * @ppi: array of port_info, must be enough for two ports
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
@@ -944,27 +947,35 @@
* RETURNS:
* Zero on success, negative on errno-based value on error.
*/
-
-int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
- unsigned int n_ports)
+int ata_pci_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi)
{
struct device *dev = &pdev->dev;
+ const struct ata_port_info *pi = NULL;
struct ata_host *host = NULL;
- const struct ata_port_info *port[2];
u8 mask;
- unsigned int legacy_mode = 0;
- int rc;
+ int legacy_mode = 0;
+ int i, rc;
DPRINTK("ENTER\n");
+ /* look up the first valid port_info */
+ for (i = 0; i < 2 && ppi[i]; i++) {
+ if (ppi[i]->port_ops != &ata_dummy_port_ops) {
+ pi = ppi[i];
+ break;
+ }
+ }
+
+ if (!pi) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "no valid port_info specified\n");
+ return -EINVAL;
+ }
+
if (!devres_open_group(dev, NULL, GFP_KERNEL))
return -ENOMEM;
- BUG_ON(n_ports < 1 || n_ports > 2);
-
- port[0] = port_info[0];
- port[1] = (n_ports > 1) ? port_info[1] : NULL;
-
/* FIXME: Really for ATA it isn't safe because the device may be
multi-purpose and we want to leave it alone if it was already
enabled. Secondly for shared use as Arjan says we want refcounting
@@ -984,7 +995,7 @@
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
mask = (1 << 2) | (1 << 0);
if ((tmp8 & mask) != mask)
- legacy_mode = (1 << 3);
+ legacy_mode = 1;
#if defined(CONFIG_NO_ATA_LEGACY)
/* Some platforms with PCI limits cannot address compat
port space. In that case we punt if their firmware has
@@ -998,7 +1009,7 @@
}
/* alloc and init host */
- host = ata_host_alloc_pinfo(dev, port, n_ports);
+ host = ata_host_alloc_pinfo(dev, ppi, 2);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to allocate ATA host\n");
@@ -1007,19 +1018,13 @@
}
if (!legacy_mode) {
- unsigned int port_mask;
-
- port_mask = ATA_PORT_PRIMARY;
- if (n_ports > 1)
- port_mask |= ATA_PORT_SECONDARY;
-
- rc = ata_pci_init_native_host(host, port_mask);
+ rc = ata_pci_init_native_host(host);
if (rc)
goto err_out;
} else {
int was_busy = 0;
- rc = ata_init_legacy_host(host, &legacy_mode, &was_busy);
+ rc = ata_init_legacy_host(host, &was_busy);
if (was_busy)
pcim_pin_device(pdev);
if (rc)
@@ -1040,8 +1045,7 @@
goto err_out;
if (!legacy_mode)
- rc = devm_request_irq(dev, pdev->irq,
- port_info[0]->port_ops->irq_handler,
+ rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
else {
irq_handler_t handler[2] = { host->ops->irq_handler,
@@ -1055,7 +1059,7 @@
goto err_out;
/* register */
- rc = ata_host_register(host, port_info[0]->sht);
+ rc = ata_host_register(host, pi->sht);
if (rc)
goto err_out;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5f4d40c..8b71b73 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -58,6 +58,7 @@
extern int atapi_dmadir;
extern int libata_fua;
extern int libata_noacpi;
+extern int ata_spindown_compat;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
@@ -96,15 +97,15 @@
extern struct ata_port *ata_port_alloc(struct ata_host *host);
/* libata-acpi.c */
-#ifdef CONFIG_SATA_ACPI
+#ifdef CONFIG_ATA_ACPI
extern int ata_acpi_exec_tfs(struct ata_port *ap);
-extern int ata_acpi_push_id(struct ata_port *ap, unsigned int ix);
+extern int ata_acpi_push_id(struct ata_device *dev);
#else
static inline int ata_acpi_exec_tfs(struct ata_port *ap)
{
return 0;
}
-static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+static inline int ata_acpi_push_id(struct ata_device *dev)
{
return 0;
}
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index d40edeb..3c55a5f 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -291,10 +291,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
/*
@@ -522,14 +518,14 @@
static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info_early = {
+ static const struct ata_port_info info_early = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &ali_early_port_ops
};
/* Revision 0x20 added DMA */
- static struct ata_port_info info_20 = {
+ static const struct ata_port_info info_20 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
@@ -537,7 +533,7 @@
.port_ops = &ali_20_port_ops
};
/* Revision 0x20 with support logic added UDMA */
- static struct ata_port_info info_20_udma = {
+ static const struct ata_port_info info_20_udma = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
@@ -546,7 +542,7 @@
.port_ops = &ali_20_port_ops
};
/* Revision 0xC2 adds UDMA66 */
- static struct ata_port_info info_c2 = {
+ static const struct ata_port_info info_c2 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
@@ -555,7 +551,7 @@
.port_ops = &ali_c2_port_ops
};
/* Revision 0xC3 is UDMA100 */
- static struct ata_port_info info_c3 = {
+ static const struct ata_port_info info_c3 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
@@ -564,7 +560,7 @@
.port_ops = &ali_c2_port_ops
};
/* Revision 0xC4 is UDMA133 */
- static struct ata_port_info info_c4 = {
+ static const struct ata_port_info info_c4 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
@@ -573,7 +569,7 @@
.port_ops = &ali_c2_port_ops
};
/* Revision 0xC5 is UDMA133 with LBA48 DMA */
- static struct ata_port_info info_c5 = {
+ static const struct ata_port_info info_c5 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -582,7 +578,7 @@
.port_ops = &ali_c5_port_ops
};
- static struct ata_port_info *port_info[2];
+ const struct ata_port_info *ppi[] = { NULL, NULL };
u8 rev, tmp;
struct pci_dev *isa_bridge;
@@ -594,17 +590,17 @@
*/
if (rev < 0x20) {
- port_info[0] = port_info[1] = &info_early;
+ ppi[0] = &info_early;
} else if (rev < 0xC2) {
- port_info[0] = port_info[1] = &info_20;
+ ppi[0] = &info_20;
} else if (rev == 0xC2) {
- port_info[0] = port_info[1] = &info_c2;
+ ppi[0] = &info_c2;
} else if (rev == 0xC3) {
- port_info[0] = port_info[1] = &info_c3;
+ ppi[0] = &info_c3;
} else if (rev == 0xC4) {
- port_info[0] = port_info[1] = &info_c4;
+ ppi[0] = &info_c4;
} else
- port_info[0] = port_info[1] = &info_c5;
+ ppi[0] = &info_c5;
ali_init_chipset(pdev);
@@ -613,10 +609,10 @@
/* Are we paired with a UDMA capable chip */
pci_read_config_byte(isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
- port_info[0] = port_info[1] = &info_20_udma;
+ ppi[0] = &info_20_udma;
pci_dev_put(isa_bridge);
}
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 67c7e87..b439351 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -324,10 +324,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations amd33_port_ops = {
@@ -542,7 +538,7 @@
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info[10] = {
+ static const struct ata_port_info info[10] = {
{ /* 0: AMD 7401 */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -624,7 +620,7 @@
.port_ops = &amd100_port_ops
}
};
- static struct ata_port_info *port_info[2];
+ const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
u8 rev;
@@ -656,9 +652,8 @@
ata_pci_clear_simplex(pdev);
/* And fire it up */
-
- port_info[0] = port_info[1] = &info[type];
- return ata_pci_init_one(pdev, port_info, 2);
+ ppi[0] = &info[type];
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index ef51940..9861059 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -414,7 +414,7 @@
static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static int printed_version;
- static struct ata_port_info info_6210 = {
+ static const struct ata_port_info info_6210 = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -422,7 +422,7 @@
.udma_mask = ATA_UDMA2,
.port_ops = &artop6210_ops,
};
- static struct ata_port_info info_626x = {
+ static const struct ata_port_info info_626x = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -430,7 +430,7 @@
.udma_mask = ATA_UDMA4,
.port_ops = &artop6260_ops,
};
- static struct ata_port_info info_626x_fast = {
+ static const struct ata_port_info info_626x_fast = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -438,32 +438,30 @@
.udma_mask = ATA_UDMA5,
.port_ops = &artop6260_ops,
};
- struct ata_port_info *port_info[2];
- struct ata_port_info *info = NULL;
- int ports = 2;
+ const struct ata_port_info *ppi[] = { NULL, NULL };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
if (id->driver_data == 0) { /* 6210 variant */
- info = &info_6210;
+ ppi[0] = &info_6210;
+ ppi[1] = &ata_dummy_port_info;
/* BIOS may have left us in UDMA, clear it before libata probe */
pci_write_config_byte(pdev, 0x54, 0);
/* For the moment (also lacks dsc) */
printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n");
printk(KERN_WARNING "Secondary ATA ports will not be activated.\n");
- ports = 1;
}
else if (id->driver_data == 1) /* 6260 */
- info = &info_626x;
+ ppi[0] = &info_626x;
else if (id->driver_data == 2) { /* 6260 or 6260 + fast */
unsigned long io = pci_resource_start(pdev, 4);
u8 reg;
- info = &info_626x;
+ ppi[0] = &info_626x;
if (inb(io) & 0x10)
- info = &info_626x_fast;
+ ppi[0] = &info_626x_fast;
/* Mac systems come up with some registers not set as we
will need them */
@@ -484,10 +482,9 @@
}
- BUG_ON(info == NULL);
+ BUG_ON(ppi[0] == NULL);
- port_info[0] = port_info[1] = info;
- return ata_pci_init_one(pdev, port_info, ports);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 2151538..8449146 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -229,10 +229,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations atiixp_port_ops = {
@@ -272,7 +268,7 @@
static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &atiixp_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -280,8 +276,8 @@
.udma_mask = 0x3F,
.port_ops = &atiixp_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
- return ata_pci_init_one(dev, port_info, 2);
+ const struct ata_port_info *ppi[] = { &info, NULL };
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 2105985..ed00fa9 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -181,10 +181,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cmd640_port_ops = {
@@ -253,17 +249,16 @@
static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &cmd640_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &cmd640_port_ops
};
-
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
cmd640_hardware_init(pdev);
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static int cmd640_reinit_one(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 3989cc5..2a79b33 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -266,10 +266,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cmd64x_port_ops = {
@@ -381,7 +377,7 @@
{
u32 class_rev;
- static struct ata_port_info cmd_info[6] = {
+ static const struct ata_port_info cmd_info[6] = {
{ /* CMD 643 - no UDMA */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -428,11 +424,9 @@
.port_ops = &cmd648_port_ops
}
};
- static struct ata_port_info *port_info[2], *info;
+ const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
u8 mrdmode;
- info = &cmd_info[id->driver_data];
-
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -442,10 +436,10 @@
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
if (class_rev > 4)
- info = &cmd_info[2];
+ ppi[0] = &cmd_info[2];
/* Early rev with other problems ? */
else if (class_rev == 1)
- info = &cmd_info[3];
+ ppi[0] = &cmd_info[3];
}
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
@@ -461,8 +455,7 @@
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- port_info[0] = port_info[1] = info;
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 79bef0d..83bcc5b 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -155,10 +155,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cs5520_port_ops = {
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 29642d5..1b67923 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -176,10 +176,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cs5530_port_ops = {
@@ -339,7 +335,7 @@
static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &cs5530_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -348,23 +344,23 @@
.port_ops = &cs5530_port_ops
};
/* The docking connector doesn't do UDMA, and it seems not MWDMA */
- static struct ata_port_info info_palmax_secondary = {
+ static const struct ata_port_info info_palmax_secondary = {
.sht = &cs5530_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &cs5530_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
/* Chip initialisation */
if (cs5530_init_chip())
return -ENODEV;
if (cs5530_is_palmax())
- port_info[1] = &info_palmax_secondary;
+ ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 22006ae..f37d4cd 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -173,10 +173,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cs5535_port_ops = {
@@ -227,7 +223,7 @@
static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &cs5535_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -235,7 +231,7 @@
.udma_mask = 0x1f,
.port_ops = &cs5535_port_ops
};
- struct ata_port_info *ports[1] = { &info };
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
u32 timings, dummy;
@@ -247,7 +243,7 @@
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_init_one(dev, ports, 1);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 6ec049c..27b9f29 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -125,10 +125,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations cy82c693_port_ops = {
@@ -169,14 +165,14 @@
static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &cy82c693_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cy82c693_port_ops
};
- static struct ata_port_info *port_info[1] = { &info };
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
/* Devfn 1 is the ATA primary. The secondary is magic and on devfn2.
For the moment we don't handle the secondary. FIXME */
@@ -184,7 +180,7 @@
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_init_one(pdev, port_info, 1);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index d0f52e0..079248a 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -247,10 +247,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations efar_ops = {
@@ -305,7 +301,7 @@
static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &efar_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -313,13 +309,13 @@
.udma_mask = 0x0f, /* UDMA 66 */
.port_ops = &efar_ops,
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index e64e05e..c6c8a8b 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -331,10 +331,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
/*
@@ -421,7 +417,7 @@
static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info_hpt366 = {
+ static const struct ata_port_info info_hpt366 = {
.sht = &hpt36x_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -429,7 +425,8 @@
.udma_mask = 0x1f,
.port_ops = &hpt366_port_ops
};
- struct ata_port_info *port_info[2] = {&info_hpt366, &info_hpt366};
+ struct ata_port_info info = info_hpt366;
+ const struct ata_port_info *ppi[] = { &info, NULL };
u32 class_rev;
u32 reg1;
@@ -450,17 +447,17 @@
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
case 5:
- info_hpt366.private_data = &hpt366_40;
+ info.private_data = &hpt366_40;
break;
case 9:
- info_hpt366.private_data = &hpt366_25;
+ info.private_data = &hpt366_25;
break;
default:
- info_hpt366.private_data = &hpt366_33;
+ info.private_data = &hpt366_33;
break;
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 1614e8c..5a0a410 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -887,7 +887,7 @@
static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* HPT370 - UDMA100 */
- static struct ata_port_info info_hpt370 = {
+ static const struct ata_port_info info_hpt370 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -896,7 +896,7 @@
.port_ops = &hpt370_port_ops
};
/* HPT370A - UDMA100 */
- static struct ata_port_info info_hpt370a = {
+ static const struct ata_port_info info_hpt370a = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -905,7 +905,7 @@
.port_ops = &hpt370a_port_ops
};
/* HPT370 - UDMA100 */
- static struct ata_port_info info_hpt370_33 = {
+ static const struct ata_port_info info_hpt370_33 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -914,7 +914,7 @@
.port_ops = &hpt370_port_ops
};
/* HPT370A - UDMA100 */
- static struct ata_port_info info_hpt370a_33 = {
+ static const struct ata_port_info info_hpt370a_33 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -923,7 +923,7 @@
.port_ops = &hpt370a_port_ops
};
/* HPT371, 372 and friends - UDMA133 */
- static struct ata_port_info info_hpt372 = {
+ static const struct ata_port_info info_hpt372 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -932,7 +932,7 @@
.port_ops = &hpt372_port_ops
};
/* HPT371, 372 and friends - UDMA100 at 50MHz clock */
- static struct ata_port_info info_hpt372_50 = {
+ static const struct ata_port_info info_hpt372_50 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -941,7 +941,7 @@
.port_ops = &hpt372_port_ops
};
/* HPT374 - UDMA133 */
- static struct ata_port_info info_hpt374 = {
+ static const struct ata_port_info info_hpt374 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -951,9 +951,10 @@
};
static const int MHz[4] = { 33, 40, 50, 66 };
-
- struct ata_port_info *port_info[2];
- struct ata_port_info *port;
+ const struct ata_port_info *port;
+ void *private_data = NULL;
+ struct ata_port_info port_info;
+ const struct ata_port_info *ppi[] = { &port_info, NULL };
u8 irqmask;
u32 class_rev;
@@ -1124,13 +1125,13 @@
return -ENODEV;
}
if (clock_slot == 3)
- port->private_data = (void *)hpt37x_timings_66;
+ private_data = (void *)hpt37x_timings_66;
else
- port->private_data = (void *)hpt37x_timings_50;
+ private_data = (void *)hpt37x_timings_50;
printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]);
} else {
- port->private_data = (void *)chip_table->clocks[clock_slot];
+ private_data = (void *)chip_table->clocks[clock_slot];
/*
* Perform a final fixup. Note that we will have used the
* DPLL on the HPT372 which means we don't have to worry
@@ -1144,9 +1145,11 @@
printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);
}
- port_info[0] = port_info[1] = port;
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, port_info, 2);
+ port_info = *port;
+ port_info.private_data = private_data;
+
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index ea1037d..f25154a 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -488,7 +488,7 @@
static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* HPT372N and friends - UDMA133 */
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &hpt3x2n_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -496,8 +496,8 @@
.udma_mask = 0x7f,
.port_ops = &hpt3x2n_port_ops
};
- struct ata_port_info *port_info[2];
- struct ata_port_info *port = &info;
+ struct ata_port_info port = info;
+ const struct ata_port_info *ppi[] = { &port, NULL };
u8 irqmask;
u32 class_rev;
@@ -585,9 +585,9 @@
/* Set our private data up. We only need a few flags so we use
it directly */
- port->private_data = NULL;
+ port.private_data = NULL;
if (pci_mhz > 60) {
- port->private_data = (void *)PCI66;
+ port.private_data = (void *)PCI66;
/*
* On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
* the MISC. register to stretch the UltraDMA Tss timing.
@@ -598,8 +598,7 @@
}
/* Now kick off ATA set up */
- port_info[0] = port_info[1] = port;
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index ac28ec8..bbabe79 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -100,10 +100,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations hpt3x3_port_ops = {
@@ -175,7 +171,7 @@
static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &hpt3x3_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -183,11 +179,11 @@
.udma_mask = 0x07,
.port_ops = &hpt3x3_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
hpt3x3_init_chipset(dev);
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index dbc8ee2..c791a46 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -60,6 +60,18 @@
struct scatterlist sg[PATA_ICSIDE_MAX_SG];
};
+struct pata_icside_info {
+ struct pata_icside_state *state;
+ struct expansion_card *ec;
+ void __iomem *base;
+ void __iomem *irqaddr;
+ unsigned int irqmask;
+ const expansioncard_ops_t *irqops;
+ unsigned int mwdma_mask;
+ unsigned int nr_ports;
+ const struct portinfo *port[2];
+};
+
#define ICS_TYPE_A3IN 0
#define ICS_TYPE_A3USER 1
#define ICS_TYPE_V6 3
@@ -269,9 +281,10 @@
return readb(irq_port) & 1 ? ATA_DMA_INTR : 0;
}
-static int icside_dma_init(struct ata_probe_ent *ae, struct expansion_card *ec)
+static int icside_dma_init(struct pata_icside_info *info)
{
- struct pata_icside_state *state = ae->private_data;
+ struct pata_icside_state *state = info->state;
+ struct expansion_card *ec = info->ec;
int i;
for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -281,7 +294,7 @@
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
state->dma = ec->dma;
- ae->mwdma_mask = 0x07; /* MW0..2 */
+ info->mwdma_mask = 0x07; /* MW0..2 */
}
return 0;
@@ -371,6 +384,8 @@
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
+ .cable_detect = ata_cable_40wire,
+
.bmdma_setup = pata_icside_bmdma_setup,
.bmdma_start = pata_icside_bmdma_start,
@@ -385,7 +400,6 @@
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = pata_icside_bmdma_stop,
- .irq_handler = ata_interrupt,
.irq_clear = ata_dummy_noret,
.irq_on = ata_irq_on,
.irq_ack = pata_icside_irq_ack,
@@ -396,11 +410,10 @@
.bmdma_status = pata_icside_bmdma_status,
};
-static void
-pata_icside_add_port(struct ata_probe_ent *ae, void __iomem *base,
- const struct portinfo *info)
+static void __devinit
+pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base,
+ const struct portinfo *info)
{
- struct ata_ioports *ioaddr = &ae->port[ae->n_ports++];
void __iomem *cmd = base + info->dataoffset;
ioaddr->cmd_addr = cmd;
@@ -419,58 +432,44 @@
ioaddr->altstatus_addr = ioaddr->ctl_addr;
}
-static int __init
-pata_icside_register_v5(struct ata_probe_ent *ae, struct expansion_card *ec)
+static int __devinit pata_icside_register_v5(struct pata_icside_info *info)
{
- struct pata_icside_state *state = ae->private_data;
+ struct pata_icside_state *state = info->state;
void __iomem *base;
- base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ base = ecardm_iomap(info->ec, ECARD_RES_MEMC, 0, 0);
if (!base)
return -ENOMEM;
state->irq_port = base;
- ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
- ec->irqmask = 1;
- ec->irq_data = state;
- ec->ops = &pata_icside_ops_arcin_v5;
-
- /*
- * Be on the safe side - disable interrupts
- */
- ec->ops->irqdisable(ec, ec->irq);
-
- pata_icside_add_port(ae, base, &pata_icside_portinfo_v5);
+ info->base = base;
+ info->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
+ info->irqmask = 1;
+ info->irqops = &pata_icside_ops_arcin_v5;
+ info->nr_ports = 1;
+ info->port[0] = &pata_icside_portinfo_v5;
return 0;
}
-static int __init
-pata_icside_register_v6(struct ata_probe_ent *ae, struct expansion_card *ec)
+static int __devinit pata_icside_register_v6(struct pata_icside_info *info)
{
- struct pata_icside_state *state = ae->private_data;
+ struct pata_icside_state *state = info->state;
+ struct expansion_card *ec = info->ec;
void __iomem *ioc_base, *easi_base;
unsigned int sel = 0;
- int ret;
- ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
- if (!ioc_base) {
- ret = -ENOMEM;
- goto out;
- }
+ ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
+ if (!ioc_base)
+ return -ENOMEM;
easi_base = ioc_base;
if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
- easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
- ecard_resource_len(ec, ECARD_RES_EASI));
- if (!easi_base) {
- ret = -ENOMEM;
- goto unmap_slot;
- }
+ easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
+ if (!easi_base)
+ return -ENOMEM;
/*
* Enable access to the EASI region.
@@ -480,45 +479,72 @@
writeb(sel, ioc_base);
- ec->irq_data = state;
- ec->ops = &pata_icside_ops_arcin_v6;
-
state->irq_port = easi_base;
state->ioc_base = ioc_base;
state->port[0].port_sel = sel;
state->port[1].port_sel = sel | 1;
/*
- * Be on the safe side - disable interrupts
- */
- ec->ops->irqdisable(ec, ec->irq);
-
- /*
- * Find and register the interfaces.
- */
- pata_icside_add_port(ae, easi_base, &pata_icside_portinfo_v6_1);
- pata_icside_add_port(ae, easi_base, &pata_icside_portinfo_v6_2);
-
- /*
* FIXME: work around libata's aversion to calling port_disable.
* This permanently disables interrupts on port 0 - bad luck if
* you have a drive on that port.
*/
state->port[0].disabled = 1;
- return icside_dma_init(ae, ec);
+ info->base = easi_base;
+ info->irqops = &pata_icside_ops_arcin_v6;
+ info->nr_ports = 2;
+ info->port[0] = &pata_icside_portinfo_v6_1;
+ info->port[1] = &pata_icside_portinfo_v6_2;
- unmap_slot:
- iounmap(ioc_base);
- out:
- return ret;
+ return icside_dma_init(info);
+}
+
+static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
+{
+ struct expansion_card *ec = info->ec;
+ struct ata_host *host;
+ int i;
+
+ if (info->irqaddr) {
+ ec->irqaddr = info->irqaddr;
+ ec->irqmask = info->irqmask;
+ }
+ if (info->irqops)
+ ecard_setirq(ec, info->irqops, info->state);
+
+ /*
+ * Be on the safe side - disable interrupts
+ */
+ ec->ops->irqdisable(ec, ec->irq);
+
+ host = ata_host_alloc(&ec->dev, info->nr_ports);
+ if (!host)
+ return -ENOMEM;
+
+ host->private_data = info->state;
+ host->flags = ATA_HOST_SIMPLEX;
+
+ for (i = 0; i < info->nr_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ ap->pio_mask = 0x1f;
+ ap->mwdma_mask = info->mwdma_mask;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ ap->ops = &pata_icside_port_ops;
+
+ pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]);
+ }
+
+ return ata_host_activate(host, ec->irq, ata_interrupt, 0,
+ &pata_icside_sht);
}
static int __devinit
pata_icside_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct pata_icside_state *state;
- struct ata_probe_ent ae;
+ struct pata_icside_info info;
void __iomem *idmem;
int ret;
@@ -526,7 +552,7 @@
if (ret)
goto out;
- state = kzalloc(sizeof(struct pata_icside_state), GFP_KERNEL);
+ state = devm_kzalloc(&ec->dev, sizeof(*state), GFP_KERNEL);
if (!state) {
ret = -ENOMEM;
goto release;
@@ -535,8 +561,7 @@
state->type = ICS_TYPE_NOTYPE;
state->dma = NO_DMA;
- idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {
unsigned int type;
@@ -544,21 +569,14 @@
type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
- iounmap(idmem);
+ ecardm_iounmap(ec, idmem);
state->type = type;
}
- memset(&ae, 0, sizeof(ae));
- INIT_LIST_HEAD(&ae.node);
- ae.dev = &ec->dev;
- ae.port_ops = &pata_icside_port_ops;
- ae.sht = &pata_icside_sht;
- ae.pio_mask = 0x1f;
- ae.irq = ec->irq;
- ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- ae._host_flags = ATA_HOST_SIMPLEX;
- ae.private_data = state;
+ memset(&info, 0, sizeof(info));
+ info.state = state;
+ info.ec = ec;
switch (state->type) {
case ICS_TYPE_A3IN:
@@ -572,11 +590,11 @@
break;
case ICS_TYPE_V5:
- ret = pata_icside_register_v5(&ae, ec);
+ ret = pata_icside_register_v5(&info);
break;
case ICS_TYPE_V6:
- ret = pata_icside_register_v6(&ae, ec);
+ ret = pata_icside_register_v6(&info);
break;
default:
@@ -586,12 +604,11 @@
}
if (ret == 0)
- ret = ata_device_add(&ae) == 0 ? -ENODEV : 0;
+ ret = pata_icside_add_ports(&info);
if (ret == 0)
goto out;
- kfree(state);
release:
ecard_release_resources(ec);
out:
@@ -609,8 +626,7 @@
* this register via that region.
*/
local_irq_save(flags);
- if (ec->ops)
- ec->ops->irqdisable(ec, ec->irq);
+ ec->ops->irqdisable(ec, ec->irq);
local_irq_restore(flags);
/*
@@ -638,17 +654,9 @@
* don't NULL out the drvdata - devres/libata wants it
* to free the ata_host structure.
*/
- ec->ops = NULL;
- ec->irq_data = NULL;
-
if (state->dma != NO_DMA)
free_dma(state->dma);
- if (state->ioc_base)
- iounmap(state->ioc_base);
- if (state->ioc_base != state->irq_port)
- iounmap(state->irq_port);
- kfree(state);
ecard_release_resources(ec);
}
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 17bf9f3..a769952 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -257,10 +257,6 @@
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations it8213_ops = {
@@ -315,7 +311,7 @@
static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &it8213_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -323,14 +319,14 @@
.udma_mask = 0x1f, /* UDMA 100 */
.port_ops = &it8213_ops,
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ /* Current IT8213 stuff is single port */
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- /* Current IT8213 stuff is single port */
- return ata_pci_init_one(pdev, port_info, 1);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index f1f8cec..ff9a6fd 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -620,10 +620,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations it821x_smart_port_ops = {
@@ -722,14 +718,14 @@
{
u8 conf;
- static struct ata_port_info info_smart = {
+ static const struct ata_port_info info_smart = {
.sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &it821x_smart_port_ops
};
- static struct ata_port_info info_passthru = {
+ static const struct ata_port_info info_passthru = {
.sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -737,8 +733,8 @@
.udma_mask = 0x7f,
.port_ops = &it821x_passthru_port_ops
};
- static struct ata_port_info *port_info[2];
+ const struct ata_port_info *ppi[] = { NULL, NULL };
static char *mode[2] = { "pass through", "smart" };
/* Force the card into bypass mode if so requested */
@@ -751,11 +747,11 @@
printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
if (conf == 0)
- port_info[0] = port_info[1] = &info_passthru;
+ ppi[0] = &info_passthru;
else
- port_info[0] = port_info[1] = &info_smart;
+ ppi[0] = &info_smart;
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 420c343..b994351 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -31,7 +31,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_ready(dev)) {
+ if (ata_dev_enabled(dev)) {
ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 1daf78a..8d799e8 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -138,10 +138,6 @@
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations jmicron_ops = {
@@ -195,7 +191,7 @@
static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &jmicron_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -205,9 +201,9 @@
.port_ops = &jmicron_ops,
};
- struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 837b7fe..edbfe0d 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -107,10 +107,6 @@
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations marvell_ops = {
@@ -165,7 +161,7 @@
static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &marvell_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -175,7 +171,7 @@
.port_ops = &marvell_ops,
};
- static struct ata_port_info info_sata = {
+ static const struct ata_port_info info_sata = {
.sht = &marvell_sht,
/* Slave possible as its magically mapped not real */
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -186,13 +182,12 @@
.port_ops = &marvell_ops,
};
- struct ata_port_info *port_info[2] = { &info, &info_sata };
- int n_port = 2;
+ const struct ata_port_info *ppi[] = { &info, &info_sata };
if (pdev->device == 0x6101)
- n_port = 1;
+ ppi[1] = &ata_dummy_port_info;
- return ata_pci_init_one(pdev, port_info, n_port);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 9587a89..368fac7 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -280,10 +280,6 @@
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static struct ata_port_operations mpc52xx_ata_port_ops = {
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 3bfbd49..4ea4283 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -165,10 +165,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations mpiix_port_ops = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index dbba5b7..81f5634 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -37,10 +37,6 @@
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations netcell_ops = {
@@ -96,7 +92,7 @@
static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &netcell_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
/* Actually we don't really care about these as the
@@ -106,7 +102,7 @@
.udma_mask = 0x3f, /* UDMA 133 */
.port_ops = &netcell_ops,
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *port_info[] = { &info, NULL };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
@@ -116,7 +112,7 @@
ata_pci_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, port_info);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index ebc58a9..ea70ec7 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -158,10 +158,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations ns87410_port_ops = {
@@ -195,14 +191,14 @@
static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &ns87410_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x0F,
.port_ops = &ns87410_port_ops
};
- static struct ata_port_info *port_info[2] = {&info, &info};
- return ata_pci_init_one(dev, port_info, 2);
+ const struct ata_port_info *ppi[] = { &info, NULL };
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 4d75d32..29c23dd 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -234,10 +234,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations oldpiix_pata_ops = {
@@ -293,20 +289,20 @@
static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &oldpiix_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
.port_ops = &oldpiix_pata_ops,
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 0af8a2c..1c44653 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -179,10 +179,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations opti_port_ops = {
@@ -220,19 +216,19 @@
static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &opti_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &opti_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
static int printed_version;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 2843e48..3093b02 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -363,10 +363,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations optidma_port_ops = {
@@ -486,14 +482,14 @@
static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info_82c700 = {
+ static const struct ata_port_info info_82c700 = {
.sht = &optidma_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &optidma_port_ops
};
- static struct ata_port_info info_82c700_udma = {
+ static const struct ata_port_info info_82c700_udma = {
.sht = &optidma_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -501,8 +497,7 @@
.udma_mask = 0x07,
.port_ops = &optiplus_port_ops
};
- static struct ata_port_info *port_info[2];
- struct ata_port_info *info = &info_82c700;
+ const struct ata_port_info *ppi[] = { &info_82c700, NULL };
static int printed_version;
if (!printed_version++)
@@ -514,10 +509,9 @@
pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */
if (optiplus_with_udma(dev))
- info = &info_82c700_udma;
+ ppi[0] = &info_82c700_udma;
- port_info[0] = port_info[1] = info;
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 11245e3..4d44c75 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -397,6 +397,7 @@
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index ee636be..edbaf9d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -244,10 +244,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations pdc2024x_port_ops = {
@@ -321,7 +317,7 @@
static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info[3] = {
+ static const struct ata_port_info info[3] = {
{
.sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -348,9 +344,7 @@
}
};
- static struct ata_port_info *port_info[2];
-
- port_info[0] = port_info[1] = &info[id->driver_data];
+ const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
struct pci_dev *bridge = dev->bus->self;
@@ -362,7 +356,7 @@
return -ENODEV;
}
}
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index a0a650c..1f63848 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -48,6 +48,8 @@
return 0;
}
+static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
+
static struct scsi_host_template pata_platform_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -91,7 +93,7 @@
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
- .port_start = ata_port_start,
+ .port_start = ata_dummy_ret0,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c54673..ba96b54 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -200,10 +200,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations radisys_pata_ops = {
@@ -259,7 +255,7 @@
static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &radisys_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -267,13 +263,13 @@
.udma_mask = 0x14, /* UDMA33/66 only */
.port_ops = &radisys_pata_ops,
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 85c4529..2bfd7ef 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -40,7 +40,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (ata_dev_ready(dev)) {
+ if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
@@ -69,10 +69,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations rz1000_port_ops = {
@@ -135,22 +131,20 @@
static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info *port_info[2];
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &rz1000_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &rz1000_port_ops
};
+ const struct ata_port_info *ppi[] = { &info, NULL };
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
- if (rz1000_fifo_disable(pdev) == 0) {
- port_info[0] = &info;
- port_info[1] = &info;
- return ata_pci_init_one(pdev, port_info, 2);
- }
+ if (rz1000_fifo_disable(pdev) == 0)
+ return ata_pci_init_one(pdev, ppi);
+
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
/* Not safe to use so skip */
return -ENODEV;
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 66e8ff4..225013e 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -194,10 +194,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations sc1200_port_ops = {
@@ -247,7 +243,7 @@
static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &sc1200_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -255,10 +251,10 @@
.udma_mask = 0x07,
.port_ops = &sc1200_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
-
/* Can't enable port 2 yet, see top comments */
- return ata_pci_init_one(dev, port_info, 1);
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 203f463..cca3aa2 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -984,10 +984,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations scc_pata_ops = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index b6e0203..dee6e21 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -315,10 +315,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations serverworks_osb4_port_ops = {
@@ -479,8 +475,7 @@
static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- int ports = 2;
- static struct ata_port_info info[4] = {
+ static const struct ata_port_info info[4] = {
{ /* OSB4 */
.sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -511,8 +506,7 @@
.port_ops = &serverworks_csb_port_ops
}
};
- static struct ata_port_info *port_info[2];
- struct ata_port_info *devinfo = &info[id->driver_data];
+ const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
@@ -521,7 +515,7 @@
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
/* Select non UDMA capable OSB4 if we can't do fixups */
if ( serverworks_fixup_osb4(pdev) < 0)
- devinfo = &info[1];
+ ppi[0] = &info[1];
}
/* setup CSB5/CSB6 : South Bridge and IDE option RAID */
else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
@@ -531,11 +525,11 @@
/* If the returned btr is the newer revision then
select the right info block */
if (serverworks_fixup_csb(pdev) == 3)
- devinfo = &info[3];
+ ppi[0] = &info[3];
/* Is this the 3rd channel CSB6 IDE ? */
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
- ports = 1;
+ ppi[1] = &ata_dummy_port_info;
}
/* setup HT1000E */
else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
@@ -544,8 +538,7 @@
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
ata_pci_clear_simplex(pdev);
- port_info[0] = port_info[1] = devinfo;
- return ata_pci_init_one(pdev, port_info, ports);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index a5886f0..440e2cb 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -232,10 +232,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static struct ata_port_operations sil680_port_ops = {
@@ -345,7 +341,7 @@
static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -353,7 +349,7 @@
.udma_mask = 0x7f,
.port_ops = &sil680_port_ops
};
- static struct ata_port_info info_slow = {
+ static const struct ata_port_info info_slow = {
.sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -361,7 +357,7 @@
.udma_mask = 0x3f,
.port_ops = &sil680_port_ops
};
- static struct ata_port_info *port_info[2] = {&info, &info};
+ const struct ata_port_info *ppi[] = { &info, NULL };
static int printed_version;
if (!printed_version++)
@@ -370,12 +366,12 @@
switch(sil680_init_chip(pdev))
{
case 0:
- port_info[0] = port_info[1] = &info_slow;
+ ppi[0] = &info_slow;
break;
case 0x30:
return -ENODEV;
}
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index f5838cc..f223126 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -38,8 +38,8 @@
#define DRV_VERSION "0.5.1"
struct sis_chipset {
- u16 device; /* PCI host ID */
- struct ata_port_info *info; /* Info block */
+ u16 device; /* PCI host ID */
+ const struct ata_port_info *info; /* Info block */
/* Probably add family, cable detect type etc here to clean
up code later */
};
@@ -524,10 +524,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static const struct ata_port_operations sis_133_ops = {
@@ -700,7 +696,7 @@
.port_start = ata_port_start,
};
-static struct ata_port_info sis_info = {
+static const struct ata_port_info sis_info = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -708,7 +704,7 @@
.udma_mask = 0,
.port_ops = &sis_old_ops,
};
-static struct ata_port_info sis_info33 = {
+static const struct ata_port_info sis_info33 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -716,35 +712,35 @@
.udma_mask = ATA_UDMA2, /* UDMA 33 */
.port_ops = &sis_old_ops,
};
-static struct ata_port_info sis_info66 = {
+static const struct ata_port_info sis_info66 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA4, /* UDMA 66 */
.port_ops = &sis_66_ops,
};
-static struct ata_port_info sis_info100 = {
+static const struct ata_port_info sis_info100 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA5,
.port_ops = &sis_100_ops,
};
-static struct ata_port_info sis_info100_early = {
+static const struct ata_port_info sis_info100_early = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.udma_mask = ATA_UDMA5,
.pio_mask = 0x1f, /* pio0-4 */
.port_ops = &sis_66_ops,
};
-struct ata_port_info sis_info133 = {
+const struct ata_port_info sis_info133 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
-static struct ata_port_info sis_info133_early = {
+static const struct ata_port_info sis_info133_early = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
@@ -827,8 +823,8 @@
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- static struct ata_port_info *port_info[2];
- struct ata_port_info *port;
+ struct ata_port_info port;
+ const struct ata_port_info *ppi[] = { &port, NULL };
struct pci_dev *host = NULL;
struct sis_chipset *chipset = NULL;
struct sis_chipset *sets;
@@ -968,13 +964,12 @@
if (chipset == NULL)
return -ENODEV;
- port = chipset->info;
- port->private_data = chipset;
+ port = *chipset->info;
+ port.private_data = chipset;
sis_fixup(pdev, chipset);
- port_info[0] = port_info[1] = port;
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 9aeffdb..f48491a 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -301,20 +301,22 @@
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info_dma = {
+ static const struct ata_port_info info_dma = {
.sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &sl82c105_port_ops
};
- static struct ata_port_info info_early = {
+ static const struct ata_port_info info_early = {
.sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.port_ops = &sl82c105_port_ops
};
- static struct ata_port_info *port_info[2] = { &info_early, &info_early };
+ /* for now use only the first port */
+ const struct ata_port_info *ppi[] = { &info_early,
+ &ata_dummy_port_info };
u32 val;
int rev;
@@ -324,17 +326,14 @@
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n");
else if (rev <= 5)
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n");
- else {
- port_info[0] = &info_dma;
- port_info[1] = &info_dma;
- }
+ else
+ ppi[0] = &info_dma;
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
-
- return ata_pci_init_one(dev, port_info, 1); /* For now */
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 349887b..b1d3076 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -194,10 +194,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations triflex_port_ops = {
@@ -237,20 +233,20 @@
static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &triflex_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &triflex_port_ops
};
- static struct ata_port_info *port_info[2] = { &info, &info };
+ const struct ata_port_info *ppi[] = { &info, NULL };
static int printed_version;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, port_info, 2);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 362beb2..e4c71f7 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -301,10 +301,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
-#endif
};
static struct ata_port_operations via_port_ops = {
@@ -425,7 +421,7 @@
static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
/* Early VIA without UDMA support */
- static struct ata_port_info via_mwdma_info = {
+ static const struct ata_port_info via_mwdma_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
.pio_mask = 0x1f,
@@ -433,7 +429,7 @@
.port_ops = &via_port_ops
};
/* Ditto with IRQ masking required */
- static struct ata_port_info via_mwdma_info_borked = {
+ static const struct ata_port_info via_mwdma_info_borked = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
.pio_mask = 0x1f,
@@ -441,7 +437,7 @@
.port_ops = &via_port_ops_noirq,
};
/* VIA UDMA 33 devices (and borked 66) */
- static struct ata_port_info via_udma33_info = {
+ static const struct ata_port_info via_udma33_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
.pio_mask = 0x1f,
@@ -450,7 +446,7 @@
.port_ops = &via_port_ops
};
/* VIA UDMA 66 devices */
- static struct ata_port_info via_udma66_info = {
+ static const struct ata_port_info via_udma66_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
.pio_mask = 0x1f,
@@ -459,7 +455,7 @@
.port_ops = &via_port_ops
};
/* VIA UDMA 100 devices */
- static struct ata_port_info via_udma100_info = {
+ static const struct ata_port_info via_udma100_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
.pio_mask = 0x1f,
@@ -468,7 +464,7 @@
.port_ops = &via_port_ops
};
/* UDMA133 with bad AST (All current 133) */
- static struct ata_port_info via_udma133_info = {
+ static const struct ata_port_info via_udma133_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
.pio_mask = 0x1f,
@@ -476,7 +472,8 @@
.udma_mask = 0x7f, /* FIXME: should check north bridge */
.port_ops = &via_port_ops
};
- struct ata_port_info *port_info[2], *type;
+ struct ata_port_info type;
+ const struct ata_port_info *ppi[] = { &type, NULL };
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
@@ -521,25 +518,25 @@
switch(config->flags & VIA_UDMA) {
case VIA_UDMA_NONE:
if (config->flags & VIA_NO_UNMASK)
- type = &via_mwdma_info_borked;
+ type = via_mwdma_info_borked;
else
- type = &via_mwdma_info;
+ type = via_mwdma_info;
break;
case VIA_UDMA_33:
- type = &via_udma33_info;
+ type = via_udma33_info;
break;
case VIA_UDMA_66:
- type = &via_udma66_info;
+ type = via_udma66_info;
/* The 66 MHz devices require we enable the clock */
pci_read_config_dword(pdev, 0x50, &timing);
timing |= 0x80008;
pci_write_config_dword(pdev, 0x50, timing);
break;
case VIA_UDMA_100:
- type = &via_udma100_info;
+ type = via_udma100_info;
break;
case VIA_UDMA_133:
- type = &via_udma133_info;
+ type = via_udma133_info;
break;
default:
WARN_ON(1);
@@ -554,10 +551,9 @@
}
/* We have established the device type, now fire it up */
- type->private_data = (void *)config;
+ type.private_data = (void *)config;
- port_info[0] = port_info[1] = type;
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index b3b62e9..bda5e77 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -135,10 +135,6 @@
.slave_configure = inic_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const int scr_map[] = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index a097595..4cea3ef 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -325,10 +325,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static struct scsi_host_template nv_adma_sht = {
@@ -347,10 +343,6 @@
.slave_configure = nv_adma_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations nv_generic_ops = {
@@ -465,7 +457,7 @@
.host_stop = nv_adma_host_stop,
};
-static struct ata_port_info nv_port_info[] = {
+static const struct ata_port_info nv_port_info[] = {
/* generic */
{
.sht = &nv_sht,
@@ -1545,7 +1537,7 @@
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
- const struct ata_port_info *ppi[2];
+ const struct ata_port_info *ppi[] = { NULL, NULL };
struct ata_host *host;
struct nv_host_priv *hpriv;
int rc;
@@ -1573,8 +1565,8 @@
type = ADMA;
}
- ppi[0] = ppi[1] = &nv_port_info[type];
- rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+ ppi[0] = &nv_port_info[type];
+ rc = ata_pci_prepare_native_host(pdev, ppi, &host);
if (rc)
return rc;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 0a1e417..e8483aa 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -182,10 +182,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sil_ops = {
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index b97ee9f..a69d78c 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -380,10 +380,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sil24_ops = {
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index d8ee062..ee66c5f 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -129,7 +129,7 @@
.port_start = ata_port_start,
};
-static struct ata_port_info sis_port_info = {
+static const struct ata_port_info sis_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x7,
@@ -255,7 +255,7 @@
{
static int printed_version;
struct ata_port_info pi = sis_port_info;
- const struct ata_port_info *ppi[2] = { &pi, &pi };
+ const struct ata_port_info *ppi[] = { &pi, NULL };
struct ata_host *host;
u32 genctl, val;
u8 pmr;
@@ -335,7 +335,7 @@
break;
}
- rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+ rc = ata_pci_prepare_native_host(pdev, ppi, &host);
if (rc)
return rc;
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f74e383..006f5e3 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -125,7 +125,7 @@
.port_start = ata_port_start,
};
-static struct ata_port_info uli_port_info = {
+static const struct ata_port_info uli_port_info = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f, /* pio0-4 */
@@ -201,19 +201,33 @@
n_ports = 2;
if (board_idx == uli_5287)
n_ports = 4;
- rc = ata_pci_prepare_native_host(pdev, ppi, n_ports, &host);
- if (rc)
- return rc;
+
+ /* allocate the host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+ if (!host)
+ return -ENOMEM;
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
host->private_data = hpriv;
+ /* the first two ports are standard SFF */
+ rc = ata_pci_init_native_host(host);
+ if (rc)
+ return rc;
+
+ rc = ata_pci_init_bmdma(host);
+ if (rc)
+ return rc;
+
iomap = host->iomap;
switch (board_idx) {
case uli_5287:
+ /* If there are four, the last two live right after
+ * the standard SFF ports.
+ */
hpriv->scr_cfg_addr[0] = ULI5287_BASE;
hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 939c924..d105d2c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -116,10 +116,6 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations vt6420_sata_ops = {
@@ -415,7 +411,7 @@
struct ata_host *host;
int rc;
- rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+ rc = ata_pci_prepare_native_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
diff --git a/drivers/ata/sis.h b/drivers/ata/sis.h
index 231da8f..0f2208d 100644
--- a/drivers/ata/sis.h
+++ b/drivers/ata/sis.h
@@ -2,4 +2,4 @@
struct ata_port_info;
/* pata_sis.c */
-extern struct ata_port_info sis_info133;
+extern const struct ata_port_info sis_info133;
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 3368745..f5a47a4 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -2,19 +2,22 @@
# ATM device configuration
#
-menu "ATM drivers"
+menuconfig ATM_DRIVERS
+ bool "ATM drivers"
depends on NETDEVICES && ATM
+ default y
+
+if ATM_DRIVERS
config ATM_DUMMY
tristate "Dummy ATM driver"
- depends on ATM
help
Dummy ATM driver. Useful for proxy signalling, testing,
and development. If unsure, say N.
config ATM_TCP
tristate "ATM over TCP"
- depends on INET && ATM
+ depends on INET
help
ATM over TCP driver. Useful mainly for development and for
experiments. If unsure, say N.
@@ -30,7 +33,7 @@
config ATM_ENI
tristate "Efficient Networks ENI155P"
- depends on PCI && ATM
+ depends on PCI
---help---
Driver for the Efficient Networks ENI155p series and SMC ATM
Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
@@ -139,7 +142,7 @@
config ATM_FIRESTREAM
tristate "Fujitsu FireStream (FS50/FS155) "
- depends on PCI && ATM
+ depends on PCI
help
Driver for the Fujitsu FireStream 155 (MB86697) and
FireStream 50 (MB86695) ATM PCI chips.
@@ -149,7 +152,7 @@
config ATM_ZATM
tristate "ZeitNet ZN1221/ZN1225"
- depends on PCI && ATM
+ depends on PCI
help
Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
adapters.
@@ -169,7 +172,7 @@
config ATM_NICSTAR
tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
- depends on PCI && ATM && !64BIT
+ depends on PCI && !64BIT
help
The NICStAR chipset family is used in a large number of ATM NICs for
25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
@@ -202,7 +205,7 @@
config ATM_IDT77252
tristate "IDT 77252 (NICStAR II)"
- depends on PCI && ATM
+ depends on PCI
help
Driver for the IDT 77252 ATM PCI chips.
@@ -237,7 +240,7 @@
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
- depends on PCI && ATM
+ depends on PCI
select BITREVERSE
help
This is a driver for ATMizer based ATM card produced by Madge
@@ -262,7 +265,7 @@
config ATM_HORIZON
tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)"
- depends on PCI && ATM
+ depends on PCI
help
This is a driver for the Horizon chipset ATM adapter cards once
produced by Madge Networks Ltd. Say Y (or M to compile as a module
@@ -286,7 +289,7 @@
config ATM_IA
tristate "Interphase ATM PCI x575/x525/x531"
- depends on PCI && ATM && !64BIT
+ depends on PCI && !64BIT
---help---
This is a driver for the Interphase (i)ChipSAR adapter cards
which include a variety of variants in term of the size of the
@@ -319,7 +322,7 @@
config ATM_FORE200E_MAYBE
tristate "FORE Systems 200E-series"
- depends on (PCI || SBUS) && ATM
+ depends on PCI || SBUS
---help---
This is a driver for the FORE Systems 200E-series ATM adapter
cards. It simultaneously supports PCA-200E and SBA-200E models
@@ -436,7 +439,7 @@
config ATM_HE
tristate "ForeRunner HE Series"
- depends on PCI && ATM
+ depends on PCI
help
This is a driver for the Marconi ForeRunner HE-series ATM adapter
cards. It simultaneously supports the 155 and 622 versions.
@@ -448,5 +451,4 @@
Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
HE cards. This driver provides carrier detection some statistics.
-endmenu
-
+endif # ATM
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 0300e7f5..2e18a63 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -6,6 +6,7 @@
#
menu "Auxiliary Display support"
+ depends on PARPORT
config KS0108
tristate "KS0108 LCD Controller"
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 17ee97f..b4c8319 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -444,8 +444,6 @@
this option is dangerous unless the CD-RW media is known good, as we
don't do deferred write error handling yet.
-source "drivers/s390/block/Kconfig"
-
config ATA_OVER_ETH
tristate "ATA over Ethernet support"
depends on NET
@@ -453,6 +451,8 @@
This driver provides Support for ATA over Ethernet block
devices like the Coraid EtherDrive (R) Storage Blade.
+source "drivers/s390/block/Kconfig"
+
endmenu
endif
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 18cdd8c..5526ead 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1317,18 +1317,6 @@
}
#endif
-static struct loop_device *loop_find_dev(int number)
-{
- struct loop_device *lo;
-
- list_for_each_entry(lo, &loop_devices, lo_list) {
- if (lo->lo_number == number)
- return lo;
- }
- return NULL;
-}
-
-static struct loop_device *loop_init_one(int i);
static int lo_open(struct inode *inode, struct file *file)
{
struct loop_device *lo = inode->i_bdev->bd_disk->private_data;
@@ -1337,11 +1325,6 @@
lo->lo_refcnt++;
mutex_unlock(&lo->lo_ctl_mutex);
- mutex_lock(&loop_devices_mutex);
- if (!loop_find_dev(lo->lo_number + 1))
- loop_init_one(lo->lo_number + 1);
- mutex_unlock(&loop_devices_mutex);
-
return 0;
}
@@ -1416,6 +1399,11 @@
struct loop_device *lo;
struct gendisk *disk;
+ list_for_each_entry(lo, &loop_devices, lo_list) {
+ if (lo->lo_number == i)
+ return lo;
+ }
+
lo = kzalloc(sizeof(*lo), GFP_KERNEL);
if (!lo)
goto out;
@@ -1448,7 +1436,7 @@
out_free_dev:
kfree(lo);
out:
- return ERR_PTR(-ENOMEM);
+ return NULL;
}
static void loop_del_one(struct loop_device *lo)
@@ -1462,35 +1450,25 @@
static struct kobject *loop_probe(dev_t dev, int *part, void *data)
{
- unsigned int number = dev & MINORMASK;
struct loop_device *lo;
+ struct kobject *kobj;
mutex_lock(&loop_devices_mutex);
- lo = loop_find_dev(number);
- if (lo == NULL)
- lo = loop_init_one(number);
+ lo = loop_init_one(dev & MINORMASK);
+ kobj = lo ? get_disk(lo->lo_disk) : ERR_PTR(-ENOMEM);
mutex_unlock(&loop_devices_mutex);
*part = 0;
- if (IS_ERR(lo))
- return (void *)lo;
- else
- return &lo->lo_disk->kobj;
+ return kobj;
}
static int __init loop_init(void)
{
- struct loop_device *lo;
-
if (register_blkdev(LOOP_MAJOR, "loop"))
return -EIO;
blk_register_region(MKDEV(LOOP_MAJOR, 0), 1UL << MINORBITS,
THIS_MODULE, loop_probe, NULL, NULL);
- lo = loop_init_one(0);
- if (IS_ERR(lo))
- goto out;
-
if (max_loop) {
printk(KERN_INFO "loop: the max_loop option is obsolete "
"and will be removed in March 2008\n");
@@ -1498,11 +1476,6 @@
}
printk(KERN_INFO "loop: module loaded\n");
return 0;
-
-out:
- unregister_blkdev(LOOP_MAJOR, "loop");
- printk(KERN_ERR "loop: ran out of memory\n");
- return -ENOMEM;
}
static void __exit loop_exit(void)
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 0f4203b..6055b9c 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -307,7 +307,9 @@
if (hu) {
struct hci_dev *hdev = hu->hdev;
- hci_uart_close(hdev);
+
+ if (hdev)
+ hci_uart_close(hdev);
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
hu->proto->close(hu);
@@ -473,12 +475,18 @@
tty->low_latency = 1;
} else
return -EBUSY;
+ break;
case HCIUARTGETPROTO:
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
return hu->proto->id;
return -EUNATCH;
+ case HCIUARTGETDEVICE:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return hu->hdev->id;
+ return -EUNATCH;
+
default:
err = n_tty_ioctl(tty, file, cmd, arg);
break;
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index b250e67..1097ce7 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -28,8 +28,9 @@
#endif
/* Ioctls */
-#define HCIUARTSETPROTO _IOW('U', 200, int)
-#define HCIUARTGETPROTO _IOR('U', 201, int)
+#define HCIUARTSETPROTO _IOW('U', 200, int)
+#define HCIUARTGETPROTO _IOR('U', 201, int)
+#define HCIUARTGETDEVICE _IOR('U', 202, int)
/* UART protocols */
#define HCI_UART_MAX_PROTO 4
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2df42fd..abcafac 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -6,6 +6,7 @@
config VT
bool "Virtual terminal" if EMBEDDED
+ depends on !S390
select INPUT
default y if !VIOCONS
---help---
@@ -81,6 +82,7 @@
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
+ depends on HAS_IOMEM
---help---
Say Y here if you have any non-standard serial boards -- boards
which aren't supported using the standard "dumb" serial driver.
@@ -765,7 +767,7 @@
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH && !S390
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -813,7 +815,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -858,6 +860,7 @@
config DTLK
tristate "Double Talk PC internal speech card support"
+ depends on ISA
help
This driver is for the DoubleTalk PC, a speech synthesizer
manufactured by RC Systems (<http://www.rcsys.com/>). It is also
@@ -1043,7 +1046,7 @@
config HANGCHECK_TIMER
tristate "Hangcheck timer"
- depends on X86 || IA64 || PPC64
+ depends on X86 || IA64 || PPC64 || S390
help
The hangcheck-timer module detects when the system has gone
out to lunch past a certain margin. It can reboot the system
@@ -1078,5 +1081,7 @@
depends on ISA || PCI
default y
+source "drivers/s390/char/Kconfig"
+
endmenu
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index c9f0f25..801abdd 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -268,7 +268,7 @@
printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20);
return 0;
}
- if (aper + size > 0xffffffff) {
+ if ((u64)aper + size > 0x100000000ULL) {
printk(KERN_ERR PFX "Aperture out of bounds\n");
return 0;
}
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index a6dcb29..b894f67 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -3,6 +3,8 @@
#
menu "IPMI"
+ depends on HAS_IOMEM
+
config IPMI_HANDLER
tristate 'IPMI top-level message handler'
help
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 6c5d15d..78e1b96 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1915,10 +1915,10 @@
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
info->io_setup = mem_setup;
- info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
info->io_setup = port_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
kfree(info);
printk("ipmi_si: Unknown ACPI I/O Address type\n");
@@ -2974,6 +2974,10 @@
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
+
+#ifdef CONFIG_PPC_OF
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
+#endif
driver_unregister(&ipmi_driver);
printk("ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 147c120..41f78e2 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -50,18 +50,10 @@
#include <linux/poll.h>
#include <linux/string.h>
#include <linux/ctype.h>
-#include <linux/delay.h>
#include <asm/atomic.h>
-#ifdef CONFIG_X86
-/* This is ugly, but I've determined that x86 is the only architecture
- that can reasonably support the IPMI NMI watchdog timeout at this
- time. If another architecture adds this capability somehow, it
- will have to be a somewhat different mechanism and I have no idea
- how it will work. So in the unlikely event that another
- architecture supports this, we can figure out a good generic
- mechanism for it at that time. */
-#define HAVE_DIE_NMI_POST
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/apic.h>
#endif
#define PFX "IPMI Watchdog: "
@@ -327,11 +319,6 @@
/* If a pretimeout occurs, this is used to allow only one panic to happen. */
static atomic_t preop_panic_excl = ATOMIC_INIT(-1);
-#ifdef HAVE_DIE_NMI_POST
-static int testing_nmi;
-static int nmi_handler_registered;
-#endif
-
static int ipmi_heartbeat(void);
static void panic_halt_ipmi_heartbeat(void);
@@ -373,10 +360,6 @@
int hbnow = 0;
- /* These can be cleared as we are setting the timeout. */
- ipmi_start_timer_on_heartbeat = 0;
- pretimeout_since_last_heartbeat = 0;
-
data[0] = 0;
WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS);
@@ -451,12 +434,13 @@
wait_for_completion(&set_timeout_wait);
- mutex_unlock(&set_timeout_lock);
-
if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB)
|| ((send_heartbeat_now)
&& (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY)))
+ {
rv = ipmi_heartbeat();
+ }
+ mutex_unlock(&set_timeout_lock);
out:
return rv;
@@ -536,10 +520,12 @@
int rv;
struct ipmi_system_interface_addr addr;
- if (ipmi_ignore_heartbeat)
+ if (ipmi_ignore_heartbeat) {
return 0;
+ }
if (ipmi_start_timer_on_heartbeat) {
+ ipmi_start_timer_on_heartbeat = 0;
ipmi_watchdog_state = action_val;
return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
} else if (pretimeout_since_last_heartbeat) {
@@ -547,6 +533,7 @@
We don't want to set the action, though, we want to
leave that alone (thus it can't be combined with the
above operation. */
+ pretimeout_since_last_heartbeat = 0;
return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
}
@@ -934,45 +921,6 @@
printk(KERN_CRIT PFX "Unable to register misc device\n");
}
-#ifdef HAVE_DIE_NMI_POST
- if (nmi_handler_registered) {
- int old_pretimeout = pretimeout;
- int old_timeout = timeout;
- int old_preop_val = preop_val;
-
- /* Set the pretimeout to go off in a second and give
- ourselves plenty of time to stop the timer. */
- ipmi_watchdog_state = WDOG_TIMEOUT_RESET;
- preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */
- pretimeout = 99;
- timeout = 100;
-
- testing_nmi = 1;
-
- rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
- if (rv) {
- printk(KERN_WARNING PFX "Error starting timer to"
- " test NMI: 0x%x. The NMI pretimeout will"
- " likely not work\n", rv);
- rv = 0;
- goto out_restore;
- }
-
- msleep(1500);
-
- if (testing_nmi != 2) {
- printk(KERN_WARNING PFX "IPMI NMI didn't seem to"
- " occur. The NMI pretimeout will"
- " likely not work\n");
- }
- out_restore:
- testing_nmi = 0;
- preop_val = old_preop_val;
- pretimeout = old_pretimeout;
- timeout = old_timeout;
- }
-#endif
-
out:
up_write(®ister_sem);
@@ -982,10 +930,6 @@
ipmi_watchdog_state = action_val;
ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB);
printk(KERN_INFO PFX "Starting now!\n");
- } else {
- /* Stop the timer now. */
- ipmi_watchdog_state = WDOG_TIMEOUT_NONE;
- ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
}
}
@@ -1022,28 +966,17 @@
up_write(®ister_sem);
}
-#ifdef HAVE_DIE_NMI_POST
+#ifdef HAVE_NMI_HANDLER
static int
-ipmi_nmi(struct notifier_block *self, unsigned long val, void *data)
+ipmi_nmi(void *dev_id, int cpu, int handled)
{
- if (val != DIE_NMI_POST)
- return NOTIFY_OK;
-
- if (testing_nmi) {
- testing_nmi = 2;
- return NOTIFY_STOP;
- }
-
/* If we are not expecting a timeout, ignore it. */
if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE)
- return NOTIFY_OK;
-
- if (preaction_val != WDOG_PRETIMEOUT_NMI)
- return NOTIFY_OK;
+ return NOTIFY_DONE;
/* If no one else handled the NMI, we assume it was the IPMI
watchdog. */
- if (preop_val == WDOG_PREOP_PANIC) {
+ if ((!handled) && (preop_val == WDOG_PREOP_PANIC)) {
/* On some machines, the heartbeat will give
an error and not work unless we re-enable
the timer. So do so. */
@@ -1052,12 +985,18 @@
panic(PFX "pre-timeout");
}
- return NOTIFY_STOP;
+ return NOTIFY_DONE;
}
-static struct notifier_block ipmi_nmi_handler = {
- .notifier_call = ipmi_nmi
+static struct nmi_handler ipmi_nmi_handler =
+{
+ .link = LIST_HEAD_INIT(ipmi_nmi_handler.link),
+ .dev_name = "ipmi_watchdog",
+ .dev_id = NULL,
+ .handler = ipmi_nmi,
+ .priority = 0, /* Call us last. */
};
+int nmi_handler_registered;
#endif
static int wdog_reboot_handler(struct notifier_block *this,
@@ -1174,7 +1113,7 @@
preaction_val = WDOG_PRETIMEOUT_NONE;
else if (strcmp(inval, "pre_smi") == 0)
preaction_val = WDOG_PRETIMEOUT_SMI;
-#ifdef HAVE_DIE_NMI_POST
+#ifdef HAVE_NMI_HANDLER
else if (strcmp(inval, "pre_nmi") == 0)
preaction_val = WDOG_PRETIMEOUT_NMI;
#endif
@@ -1208,7 +1147,7 @@
static void check_parms(void)
{
-#ifdef HAVE_DIE_NMI_POST
+#ifdef HAVE_NMI_HANDLER
int do_nmi = 0;
int rv;
@@ -1221,9 +1160,20 @@
preop_op("preop_none", NULL);
do_nmi = 0;
}
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (nmi_watchdog == NMI_IO_APIC) {
+ printk(KERN_WARNING PFX "nmi_watchdog is set to IO APIC"
+ " mode (value is %d), that is incompatible"
+ " with using NMI in the IPMI watchdog."
+ " Disabling IPMI nmi pretimeout.\n",
+ nmi_watchdog);
+ preaction_val = WDOG_PRETIMEOUT_NONE;
+ do_nmi = 0;
+ }
+#endif
}
if (do_nmi && !nmi_handler_registered) {
- rv = register_die_notifier(&ipmi_nmi_handler);
+ rv = request_nmi(&ipmi_nmi_handler);
if (rv) {
printk(KERN_WARNING PFX
"Can't register nmi handler\n");
@@ -1231,7 +1181,7 @@
} else
nmi_handler_registered = 1;
} else if (!do_nmi && nmi_handler_registered) {
- unregister_die_notifier(&ipmi_nmi_handler);
+ release_nmi(&ipmi_nmi_handler);
nmi_handler_registered = 0;
}
#endif
@@ -1267,9 +1217,9 @@
rv = ipmi_smi_watcher_register(&smi_watcher);
if (rv) {
-#ifdef HAVE_DIE_NMI_POST
- if (nmi_handler_registered)
- unregister_die_notifier(&ipmi_nmi_handler);
+#ifdef HAVE_NMI_HANDLER
+ if (preaction_val == WDOG_PRETIMEOUT_NMI)
+ release_nmi(&ipmi_nmi_handler);
#endif
atomic_notifier_chain_unregister(&panic_notifier_list,
&wdog_panic_notifier);
@@ -1288,9 +1238,9 @@
ipmi_smi_watcher_unregister(&smi_watcher);
ipmi_unregister_watchdog(watchdog_ifnum);
-#ifdef HAVE_DIE_NMI_POST
+#ifdef HAVE_NMI_HANDLER
if (nmi_handler_registered)
- unregister_die_notifier(&ipmi_nmi_handler);
+ release_nmi(&ipmi_nmi_handler);
#endif
atomic_notifier_chain_unregister(&panic_notifier_list,
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 6ac3ca4..b3d4ccc 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1544,21 +1544,18 @@
}
struct tty_ldisc tty_ldisc_N_TTY = {
- TTY_LDISC_MAGIC, /* magic */
- "n_tty", /* name */
- 0, /* num */
- 0, /* flags */
- n_tty_open, /* open */
- n_tty_close, /* close */
- n_tty_flush_buffer, /* flush_buffer */
- n_tty_chars_in_buffer, /* chars_in_buffer */
- read_chan, /* read */
- write_chan, /* write */
- n_tty_ioctl, /* ioctl */
- n_tty_set_termios, /* set_termios */
- normal_poll, /* poll */
- NULL, /* hangup */
- n_tty_receive_buf, /* receive_buf */
- n_tty_write_wakeup /* write_wakeup */
+ .magic = TTY_LDISC_MAGIC,
+ .name = "n_tty",
+ .open = n_tty_open,
+ .close = n_tty_close,
+ .flush_buffer = n_tty_flush_buffer,
+ .chars_in_buffer = n_tty_chars_in_buffer,
+ .read = read_chan,
+ .write = write_chan,
+ .ioctl = n_tty_ioctl,
+ .set_termios = n_tty_set_termios,
+ .poll = normal_poll,
+ .receive_buf = n_tty_receive_buf,
+ .write_wakeup = n_tty_write_wakeup
};
diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c
index 245f031..8cc60b6 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/char/rio/riocmd.c
@@ -402,7 +402,7 @@
rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %Zd, name ``%s''\n", HostP - p->RIOHosts, HostP->Name);
rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number 0x%x\n", rup);
- if (Rup >= (unsigned short) MAX_RUP) {
+ if (Rup < (unsigned short) MAX_RUP) {
rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name);
} else
rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name);
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 61a63da..a3fd7e7 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -1014,9 +1014,6 @@
/*
* Info->count is now 1; so it's safe to sleep now.
*/
- info->session = process_session(current);
- info->pgrp = process_group(current);
-
if ((info->flags & ROCKET_INITIALIZED) == 0) {
cp = &info->channel;
sSetRxTrigger(cp, TRIG_1);
diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h
index 89b4d7b..b4c53df 100644
--- a/drivers/char/rocket_int.h
+++ b/drivers/char/rocket_int.h
@@ -1158,8 +1158,6 @@
int xmit_head;
int xmit_tail;
int xmit_cnt;
- int session;
- int pgrp;
int cd_status;
int ignore_status_mask;
int read_status_mask;
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index 2f56e8c..1b75b0b 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -203,8 +203,6 @@
class = (code & EV_CLASS_MASK);
if (class == EV_CLASS_PWRD_NOTIFY || code == ENV_PWRDN_PEND) {
- struct task_struct *p;
-
if (snsc_shutting_down)
return;
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 2a7736b..02b49bc 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1171,6 +1171,112 @@
}
/*
+ * support for 32 bit ioctl calls on 64 bit systems
+ */
+#ifdef CONFIG_COMPAT
+static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
+{
+ struct MGSL_PARAMS32 tmp_params;
+
+ DBGINFO(("%s get_params32\n", info->device_name));
+ tmp_params.mode = (compat_ulong_t)info->params.mode;
+ tmp_params.loopback = info->params.loopback;
+ tmp_params.flags = info->params.flags;
+ tmp_params.encoding = info->params.encoding;
+ tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
+ tmp_params.addr_filter = info->params.addr_filter;
+ tmp_params.crc_type = info->params.crc_type;
+ tmp_params.preamble_length = info->params.preamble_length;
+ tmp_params.preamble = info->params.preamble;
+ tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
+ tmp_params.data_bits = info->params.data_bits;
+ tmp_params.stop_bits = info->params.stop_bits;
+ tmp_params.parity = info->params.parity;
+ if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
+ return -EFAULT;
+ return 0;
+}
+
+static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
+{
+ struct MGSL_PARAMS32 tmp_params;
+
+ DBGINFO(("%s set_params32\n", info->device_name));
+ if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
+ return -EFAULT;
+
+ spin_lock(&info->lock);
+ info->params.mode = tmp_params.mode;
+ info->params.loopback = tmp_params.loopback;
+ info->params.flags = tmp_params.flags;
+ info->params.encoding = tmp_params.encoding;
+ info->params.clock_speed = tmp_params.clock_speed;
+ info->params.addr_filter = tmp_params.addr_filter;
+ info->params.crc_type = tmp_params.crc_type;
+ info->params.preamble_length = tmp_params.preamble_length;
+ info->params.preamble = tmp_params.preamble;
+ info->params.data_rate = tmp_params.data_rate;
+ info->params.data_bits = tmp_params.data_bits;
+ info->params.stop_bits = tmp_params.stop_bits;
+ info->params.parity = tmp_params.parity;
+ spin_unlock(&info->lock);
+
+ change_params(info);
+
+ return 0;
+}
+
+static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct slgt_info *info = tty->driver_data;
+ int rc = -ENOIOCTLCMD;
+
+ if (sanity_check(info, tty->name, "compat_ioctl"))
+ return -ENODEV;
+ DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
+
+ switch (cmd) {
+
+ case MGSL_IOCSPARAMS32:
+ rc = set_params32(info, compat_ptr(arg));
+ break;
+
+ case MGSL_IOCGPARAMS32:
+ rc = get_params32(info, compat_ptr(arg));
+ break;
+
+ case MGSL_IOCGPARAMS:
+ case MGSL_IOCSPARAMS:
+ case MGSL_IOCGTXIDLE:
+ case MGSL_IOCGSTATS:
+ case MGSL_IOCWAITEVENT:
+ case MGSL_IOCGIF:
+ case MGSL_IOCSGPIO:
+ case MGSL_IOCGGPIO:
+ case MGSL_IOCWAITGPIO:
+ case TIOCGICOUNT:
+ rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
+ break;
+
+ case MGSL_IOCSTXIDLE:
+ case MGSL_IOCTXENABLE:
+ case MGSL_IOCRXENABLE:
+ case MGSL_IOCTXABORT:
+ case TIOCMIWAIT:
+ case MGSL_IOCSIF:
+ rc = ioctl(tty, file, cmd, arg);
+ break;
+ }
+
+ DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
+ return rc;
+}
+#else
+#define slgt_compat_ioctl NULL
+#endif /* ifdef CONFIG_COMPAT */
+
+/*
* proc fs support
*/
static inline int line_info(char *buf, struct slgt_info *info)
@@ -3446,6 +3552,7 @@
.chars_in_buffer = chars_in_buffer,
.flush_buffer = flush_buffer,
.ioctl = ioctl,
+ .compat_ioctl = slgt_compat_ioctl,
.throttle = throttle,
.unthrottle = unthrottle,
.send_xchar = send_xchar,
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 11089be..dc4e1ff 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -3,6 +3,7 @@
#
menu "TPM devices"
+ depends on HAS_IOMEM
config TCG_TPM
tristate "TPM Hardware Support"
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index c912d86..9363bcf 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -23,6 +23,9 @@
*/
#ifdef CONFIG_PPC64
+
+#include <asm/prom.h>
+
#define atmel_getb(chip, offset) readb(chip->vendor->iobase + offset);
#define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset)
#define atmel_request_region request_mem_region
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index fc662e4..75d2a46 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -151,6 +151,12 @@
static int tty_release(struct inode *, struct file *);
int tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg);
+#ifdef CONFIG_COMPAT
+static long tty_compat_ioctl(struct file * file, unsigned int cmd,
+ unsigned long arg);
+#else
+#define tty_compat_ioctl NULL
+#endif
static int tty_fasync(int fd, struct file * filp, int on);
static void release_tty(struct tty_struct *tty, int idx);
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
@@ -363,6 +369,29 @@
}
/**
+ * tty_buffer_flush - flush full tty buffers
+ * @tty: tty to flush
+ *
+ * flush all the buffers containing receive data
+ *
+ * Locking: none
+ */
+
+static void tty_buffer_flush(struct tty_struct *tty)
+{
+ struct tty_buffer *thead;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ while((thead = tty->buf.head) != NULL) {
+ tty->buf.head = thead->next;
+ tty_buffer_free(tty, thead);
+ }
+ tty->buf.tail = NULL;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+}
+
+/**
* tty_buffer_find - find a free tty buffer
* @tty: tty owning the buffer
* @size: characters wanted
@@ -1143,8 +1172,8 @@
return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}
-static int hung_up_tty_ioctl(struct inode * inode, struct file * file,
- unsigned int cmd, unsigned long arg)
+static long hung_up_tty_ioctl(struct file * file,
+ unsigned int cmd, unsigned long arg)
{
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
@@ -1155,6 +1184,7 @@
.write = tty_write,
.poll = tty_poll,
.ioctl = tty_ioctl,
+ .compat_ioctl = tty_compat_ioctl,
.open = tty_open,
.release = tty_release,
.fasync = tty_fasync,
@@ -1167,6 +1197,7 @@
.write = tty_write,
.poll = tty_poll,
.ioctl = tty_ioctl,
+ .compat_ioctl = tty_compat_ioctl,
.open = ptmx_open,
.release = tty_release,
.fasync = tty_fasync,
@@ -1179,6 +1210,7 @@
.write = redirected_tty_write,
.poll = tty_poll,
.ioctl = tty_ioctl,
+ .compat_ioctl = tty_compat_ioctl,
.open = tty_open,
.release = tty_release,
.fasync = tty_fasync,
@@ -1189,7 +1221,8 @@
.read = hung_up_tty_read,
.write = hung_up_tty_write,
.poll = hung_up_tty_poll,
- .ioctl = hung_up_tty_ioctl,
+ .unlocked_ioctl = hung_up_tty_ioctl,
+ .compat_ioctl = hung_up_tty_ioctl,
.release = tty_release,
};
@@ -1238,6 +1271,7 @@
ld->flush_buffer(tty);
tty_ldisc_deref(ld);
}
+ tty_buffer_flush(tty);
}
EXPORT_SYMBOL_GPL(tty_ldisc_flush);
@@ -3340,6 +3374,15 @@
case TIOCMBIC:
case TIOCMBIS:
return tty_tiocmset(tty, file, cmd, p);
+ case TCFLSH:
+ switch (arg) {
+ case TCIFLUSH:
+ case TCIOFLUSH:
+ /* flush tty buffer and allow ldisc to process ioctl */
+ tty_buffer_flush(tty);
+ break;
+ }
+ break;
}
if (tty->driver->ioctl) {
retval = (tty->driver->ioctl)(tty, file, cmd, arg);
@@ -3357,6 +3400,32 @@
return retval;
}
+#ifdef CONFIG_COMPAT
+static long tty_compat_ioctl(struct file * file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct inode *inode = file->f_dentry->d_inode;
+ struct tty_struct *tty = file->private_data;
+ struct tty_ldisc *ld;
+ int retval = -ENOIOCTLCMD;
+
+ if (tty_paranoia_check(tty, inode, "tty_ioctl"))
+ return -EINVAL;
+
+ if (tty->driver->compat_ioctl) {
+ retval = (tty->driver->compat_ioctl)(tty, file, cmd, arg);
+ if (retval != -ENOIOCTLCMD)
+ return retval;
+ }
+
+ ld = tty_ldisc_ref_wait(tty);
+ if (ld->compat_ioctl)
+ retval = ld->compat_ioctl(tty, file, cmd, arg);
+ tty_ldisc_deref(ld);
+
+ return retval;
+}
+#endif
/*
* This implements the "Secure Attention Key" --- the idea is to
@@ -3689,6 +3758,7 @@
driver->write_room = op->write_room;
driver->chars_in_buffer = op->chars_in_buffer;
driver->ioctl = op->ioctl;
+ driver->compat_ioctl = op->compat_ioctl;
driver->set_termios = op->set_termios;
driver->throttle = op->throttle;
driver->unthrottle = op->unthrottle;
@@ -3843,6 +3913,7 @@
p->signal->tty = NULL;
spin_unlock_irq(&p->sighand->siglock);
}
+EXPORT_SYMBOL(proc_clear_tty);
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
{
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index 60198a7..1cad32c 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -2,9 +2,7 @@
# Watchdog device configuration
#
-menu "Watchdog Cards"
-
-config WATCHDOG
+menuconfig WATCHDOG
bool "Watchdog Timer Support"
---help---
If you say Y here (and to one of the following options) and create a
@@ -28,9 +26,10 @@
If unsure, say N.
+if WATCHDOG
+
config WATCHDOG_NOWAYOUT
bool "Disable watchdog shutdown on close"
- depends on WATCHDOG
help
The default watchdog behaviour (which you get if you say N here) is
to stop the timer if the process managing it closes the file
@@ -43,13 +42,11 @@
#
comment "Watchdog Device Drivers"
- depends on WATCHDOG
# Architecture Independent
config SOFT_WATCHDOG
tristate "Software watchdog"
- depends on WATCHDOG
help
A software monitoring watchdog. This will fail to reboot your system
from some situations that the hardware watchdog will recover
@@ -62,14 +59,14 @@
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
- depends on WATCHDOG && ARCH_AT91RM9200
+ depends on ARCH_AT91RM9200
help
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
config 21285_WATCHDOG
tristate "DC21285 watchdog"
- depends on WATCHDOG && FOOTBRIDGE
+ depends on FOOTBRIDGE
help
The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
here if you wish to use this. Alternatively say M to compile the
@@ -83,7 +80,7 @@
config 977_WATCHDOG
tristate "NetWinder WB83C977 watchdog"
- depends on WATCHDOG && FOOTBRIDGE && ARCH_NETWINDER
+ depends on FOOTBRIDGE && ARCH_NETWINDER
help
Say Y here to include support for the WB977 watchdog included in
NetWinder machines. Alternatively say M to compile the driver as
@@ -93,7 +90,7 @@
config IXP2000_WATCHDOG
tristate "IXP2000 Watchdog"
- depends on WATCHDOG && ARCH_IXP2000
+ depends on ARCH_IXP2000
help
Say Y here if to include support for the watchdog timer
in the Intel IXP2000(2400, 2800, 2850) network processors.
@@ -104,7 +101,7 @@
config IXP4XX_WATCHDOG
tristate "IXP4xx Watchdog"
- depends on WATCHDOG && ARCH_IXP4XX
+ depends on ARCH_IXP4XX
help
Say Y here if to include support for the watchdog timer
in the Intel IXP4xx network processors. This driver can
@@ -120,7 +117,7 @@
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
- depends on WATCHDOG && ARCH_S3C2410
+ depends on ARCH_S3C2410
help
Watchdog timer block in the Samsung S3C2410 chips. This will
reboot the system when the timer expires with the watchdog
@@ -136,7 +133,7 @@
config SA1100_WATCHDOG
tristate "SA1100/PXA2xx watchdog"
- depends on WATCHDOG && ( ARCH_SA1100 || ARCH_PXA )
+ depends on ARCH_SA1100 || ARCH_PXA
help
Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
reboot your system when timeout is reached.
@@ -148,7 +145,7 @@
config MPCORE_WATCHDOG
tristate "MPcore watchdog"
- depends on WATCHDOG && ARM_MPCORE_PLATFORM && LOCAL_TIMERS
+ depends on ARM_MPCORE_PLATFORM && LOCAL_TIMERS
help
Watchdog timer embedded into the MPcore system.
@@ -157,7 +154,7 @@
config EP93XX_WATCHDOG
tristate "EP93xx Watchdog"
- depends on WATCHDOG && ARCH_EP93XX
+ depends on ARCH_EP93XX
help
Say Y here if to include support for the watchdog timer
embedded in the Cirrus Logic EP93xx family of devices.
@@ -167,14 +164,14 @@
config OMAP_WATCHDOG
tristate "OMAP Watchdog"
- depends on WATCHDOG && (ARCH_OMAP16XX || ARCH_OMAP24XX)
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX
help
Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to
enable the OMAP1610/OMAP1710 watchdog timer.
config PNX4008_WATCHDOG
tristate "PNX4008 Watchdog"
- depends on WATCHDOG && ARCH_PNX4008
+ depends on ARCH_PNX4008
help
Say Y here if to include support for the watchdog timer
in the PNX4008 processor.
@@ -187,7 +184,7 @@
config ACQUIRE_WDT
tristate "Acquire SBC Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on Single Board
Computers produced by Acquire Inc (and others). This watchdog
@@ -201,7 +198,7 @@
config ADVANTECH_WDT
tristate "Advantech SBC Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
help
If you are configuring a Linux kernel for the Advantech single-board
computer, say `Y' here to support its built-in watchdog timer
@@ -210,7 +207,7 @@
config ALIM1535_WDT
tristate "ALi M1535 PMU Watchdog Timer"
- depends on WATCHDOG && X86 && PCI
+ depends on X86 && PCI
---help---
This is the driver for the hardware watchdog on the ALi M1535 PMU.
@@ -221,7 +218,7 @@
config ALIM7101_WDT
tristate "ALi M7101 PMU Computer Watchdog"
- depends on WATCHDOG && X86 && PCI
+ depends on X86 && PCI
help
This is the driver for the hardware watchdog on the ALi M7101 PMU
as used in the x86 Cobalt servers.
@@ -233,7 +230,7 @@
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
help
This is the driver for the hardware watchdog built in to the
AMD "Elan" SC520 microcomputer commonly used in embedded systems.
@@ -246,7 +243,7 @@
config EUROTECH_WDT
tristate "Eurotech CPU-1220/1410 Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
help
Enable support for the watchdog timer on the Eurotech CPU-1220 and
CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product
@@ -254,7 +251,7 @@
config IB700_WDT
tristate "IB700 SBC Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the IB700 Single
Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
@@ -270,7 +267,7 @@
config IBMASR
tristate "IBM Automatic Server Restart"
- depends on WATCHDOG && X86
+ depends on X86
help
This is the driver for the IBM Automatic Server Restart watchdog
timer built-in into some eServer xSeries machines.
@@ -280,7 +277,7 @@
config WAFER_WDT
tristate "ICP Wafer 5823 Single Board Computer Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
help
This is a driver for the hardware watchdog on the ICP Wafer 5823
Single Board Computer (and probably other similar models).
@@ -290,7 +287,7 @@
config I6300ESB_WDT
tristate "Intel 6300ESB Timer/Watchdog"
- depends on WATCHDOG && X86 && PCI
+ depends on X86 && PCI
---help---
Hardware driver for the watchdog timer built into the Intel
6300ESB controller hub.
@@ -298,31 +295,9 @@
To compile this driver as a module, choose M here: the
module will be called i6300esb.
-config I8XX_TCO
- tristate "Intel i8xx TCO Timer/Watchdog"
- depends on WATCHDOG && (X86 || IA64) && PCI
- default n
- ---help---
- Hardware driver for the TCO timer built into the Intel 82801
- I/O Controller Hub family. The TCO (Total Cost of Ownership)
- timer is a watchdog timer that will reboot the machine after
- its second expiration. The expiration time can be configured
- with the "heartbeat" parameter.
-
- On some motherboards the driver may fail to reset the chipset's
- NO_REBOOT flag which prevents the watchdog from rebooting the
- machine. If this is the case you will get a kernel message like
- "failed to reset NO_REBOOT flag, reboot disabled by hardware".
-
- To compile this driver as a module, choose M here: the
- module will be called i8xx_tco.
-
- Note: This driver will be removed in the near future. Please
- use the Intel TCO Timer/Watchdog driver.
-
config ITCO_WDT
tristate "Intel TCO Timer/Watchdog"
- depends on WATCHDOG && (X86 || IA64) && PCI
+ depends on (X86 || IA64) && PCI
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
@@ -351,7 +326,7 @@
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
help
This is a driver for National Semiconductor PC87307/PC97307 hardware
watchdog cards as found on the SC1200. This watchdog is mainly used
@@ -365,7 +340,7 @@
config SCx200_WDT
tristate "National Semiconductor SCx200 Watchdog"
- depends on WATCHDOG && SCx200 && PCI
+ depends on SCx200 && PCI
help
Enable the built-in watchdog timer support on the National
Semiconductor SCx200 processors.
@@ -374,7 +349,7 @@
config PC87413_WDT
tristate "NS PC87413 watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the PC87413 chipset
This watchdog simply watches your kernel to make sure it doesn't
@@ -388,7 +363,7 @@
config 60XX_WDT
tristate "SBC-60XX Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
help
This driver can be used with the watchdog timer found on some
single board computers, namely the 6010 PII based computer.
@@ -402,7 +377,7 @@
config SBC8360_WDT
tristate "SBC8360 Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the SBC8360 Single
@@ -415,7 +390,7 @@
config CPU5_WDT
tristate "SMA CPU5 Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
TBD.
To compile this driver as a module, choose M here: the
@@ -423,7 +398,7 @@
config SMSC37B787_WDT
tristate "Winbond SMsC37B787 Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog component on the
Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
@@ -443,7 +418,7 @@
config W83627HF_WDT
tristate "W83627HF Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83627HF chipset
as used in Advantech PC-9578 and Tyan S2721-533 motherboards
@@ -458,7 +433,7 @@
config W83697HF_WDT
tristate "W83697HF/W83697HG Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83697HF/HG
chipset as used in Dedibox/VIA motherboards (and likely others).
@@ -473,7 +448,7 @@
config W83877F_WDT
tristate "W83877F (EMACS) Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83877F chipset
as used in EMACS PC-104 motherboards (and likely others). This
@@ -488,7 +463,7 @@
config W83977F_WDT
tristate "W83977F (PCM-5335) Watchdog Timer"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the hardware watchdog on the W83977F I/O chip
as used in AAEON's PCM-5335 SBC (and likely others). This
@@ -501,7 +476,7 @@
config MACHZ_WDT
tristate "ZF MachZ Watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
If you are using a ZF Micro MachZ processor, say Y here, otherwise
N. This is the driver for the watchdog timer built-in on that
@@ -514,7 +489,7 @@
config SBC_EPX_C3_WATCHDOG
tristate "Winsystems SBC EPX-C3 watchdog"
- depends on WATCHDOG && X86
+ depends on X86
---help---
This is the driver for the built-in watchdog timer on the EPX-C3
Single-board computer made by Winsystems, Inc.
@@ -537,19 +512,19 @@
config 8xx_WDT
tristate "MPC8xx Watchdog Timer"
- depends on WATCHDOG && 8xx
+ depends on 8xx
config 83xx_WDT
tristate "MPC83xx Watchdog Timer"
- depends on WATCHDOG && PPC_83xx
+ depends on PPC_83xx
config MV64X60_WDT
tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
- depends on WATCHDOG && MV64X60
+ depends on MV64X60
config BOOKE_WDT
bool "PowerPC Book-E Watchdog Timer"
- depends on WATCHDOG && (BOOKE || 4xx)
+ depends on BOOKE || 4xx
---help---
Please see Documentation/watchdog/watchdog-api.txt for
more information.
@@ -558,7 +533,7 @@
config WATCHDOG_RTAS
tristate "RTAS watchdog"
- depends on WATCHDOG && PPC_RTAS
+ depends on PPC_RTAS
help
This driver adds watchdog support for the RTAS watchdog.
@@ -569,16 +544,23 @@
config INDYDOG
tristate "Indy/I2 Hardware Watchdog"
- depends on WATCHDOG && SGI_IP22
+ depends on SGI_IP22
help
Hardware driver for the Indy's/I2's watchdog. This is a
watchdog timer that will reboot the machine after a 60 second
timer expired and no process has written to /dev/watchdog during
that time.
+config WDT_MTX1
+ tristate "MTX-1 Hardware Watchdog"
+ depends on MIPS_MTX1
+ help
+ Hardware driver for the MTX-1 boards. This is a watchdog timer that
+ will reboot the machine after a 100 seconds timer expired.
+
config WDT_RM9K_GPI
tristate "RM9000/GPI hardware watchdog"
- depends on WATCHDOG && CPU_RM9000
+ depends on CPU_RM9000
help
Watchdog implementation using the GPI hardware found on
PMC-Sierra RM9xxx CPUs.
@@ -590,7 +572,7 @@
config ZVM_WATCHDOG
tristate "z/VM Watchdog Timer"
- depends on WATCHDOG && S390
+ depends on S390
help
IBM s/390 and zSeries machines running under z/VM 5.1 or later
provide a virtual watchdog timer to their guest that cause a
@@ -604,7 +586,7 @@
config SH_WDT
tristate "SuperH Watchdog"
- depends on WATCHDOG && SUPERH
+ depends on SUPERH
help
This driver adds watchdog support for the integrated watchdog in the
SuperH processors. If you have one of these processors and wish
@@ -631,7 +613,7 @@
config WATCHDOG_CP1XXX
tristate "CP1XXX Hardware Watchdog support"
- depends on WATCHDOG && SPARC64 && PCI
+ depends on SPARC64 && PCI
---help---
This is the driver for the hardware watchdog timers present on
Sun Microsystems CompactPCI models CP1400 and CP1500.
@@ -645,7 +627,7 @@
config WATCHDOG_RIO
tristate "RIO Hardware Watchdog support"
- depends on WATCHDOG && SPARC64 && PCI
+ depends on SPARC64 && PCI
help
Say Y here to support the hardware watchdog capability on Sun RIO
machines. The watchdog timeout period is normally one minute but
@@ -656,11 +638,11 @@
#
comment "ISA-based Watchdog Cards"
- depends on WATCHDOG && ISA
+ depends on ISA
config PCWATCHDOG
tristate "Berkshire Products ISA-PC Watchdog"
- depends on WATCHDOG && ISA
+ depends on ISA
---help---
This is the driver for the Berkshire Products ISA-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -676,7 +658,7 @@
config MIXCOMWD
tristate "Mixcom Watchdog"
- depends on WATCHDOG && ISA
+ depends on ISA
---help---
This is a driver for the Mixcom hardware watchdog cards. This
watchdog simply watches your kernel to make sure it doesn't freeze,
@@ -690,7 +672,7 @@
config WDT
tristate "WDT Watchdog timer"
- depends on WATCHDOG && ISA
+ depends on ISA
---help---
If you have a WDT500P or WDT501P watchdog board, say Y here,
otherwise N. It is not possible to probe for this board, which means
@@ -720,11 +702,11 @@
#
comment "PCI-based Watchdog Cards"
- depends on WATCHDOG && PCI
+ depends on PCI
config PCIPCWATCHDOG
tristate "Berkshire Products PCI-PC Watchdog"
- depends on WATCHDOG && PCI
+ depends on PCI
---help---
This is the driver for the Berkshire Products PCI-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -739,7 +721,7 @@
config WDTPCI
tristate "PCI-WDT500/501 Watchdog timer"
- depends on WATCHDOG && PCI
+ depends on PCI
---help---
If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
@@ -766,11 +748,11 @@
#
comment "USB-based Watchdog Cards"
- depends on WATCHDOG && USB
+ depends on USB
config USBPCWATCHDOG
tristate "Berkshire Products USB-PC Watchdog"
- depends on WATCHDOG && USB
+ depends on USB
---help---
This is the driver for the Berkshire Products USB-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -783,4 +765,4 @@
Most people will say N.
-endmenu
+endif # WATCHDOG
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index 2cd8ff8..8bfc00c 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -46,7 +46,6 @@
obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
@@ -73,6 +72,7 @@
# MIPS Architecture
obj-$(CONFIG_INDYDOG) += indydog.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
# S390 Architecture
diff --git a/drivers/char/watchdog/cpu5wdt.c b/drivers/char/watchdog/cpu5wdt.c
index bcd7e36..d0d45a8 100644
--- a/drivers/char/watchdog/cpu5wdt.c
+++ b/drivers/char/watchdog/cpu5wdt.c
@@ -220,17 +220,17 @@
if ( verbose )
printk(KERN_DEBUG PFX "port=0x%x, verbose=%i\n", port, verbose);
- if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) {
- printk(KERN_ERR PFX "misc_register failed\n");
- goto no_misc;
- }
-
if ( !request_region(port, CPU5WDT_EXTENT, PFX) ) {
printk(KERN_ERR PFX "request_region failed\n");
err = -EBUSY;
goto no_port;
}
+ if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) {
+ printk(KERN_ERR PFX "misc_register failed\n");
+ goto no_misc;
+ }
+
/* watchdog reboot? */
val = inb(port + CPU5WDT_STATUS_REG);
val = (val >> 2) & 1;
@@ -250,9 +250,9 @@
return 0;
-no_port:
- misc_deregister(&cpu5wdt_misc);
no_misc:
+ release_region(port, CPU5WDT_EXTENT);
+no_port:
return err;
}
diff --git a/drivers/char/watchdog/eurotechwdt.c b/drivers/char/watchdog/eurotechwdt.c
index f70387f..b070324 100644
--- a/drivers/char/watchdog/eurotechwdt.c
+++ b/drivers/char/watchdog/eurotechwdt.c
@@ -413,17 +413,10 @@
{
int ret;
- ret = misc_register(&eurwdt_miscdev);
- if (ret) {
- printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
- WATCHDOG_MINOR);
- goto out;
- }
-
ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL);
if(ret) {
printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq);
- goto outmisc;
+ goto out;
}
if (!request_region(io, 2, "eurwdt")) {
@@ -438,6 +431,13 @@
goto outreg;
}
+ ret = misc_register(&eurwdt_miscdev);
+ if (ret) {
+ printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n",
+ WATCHDOG_MINOR);
+ goto outreboot;
+ }
+
eurwdt_unlock_chip();
ret = 0;
@@ -448,14 +448,14 @@
out:
return ret;
+outreboot:
+ unregister_reboot_notifier(&eurwdt_notifier);
+
outreg:
release_region(io, 2);
outirq:
free_irq(irq, NULL);
-
-outmisc:
- misc_deregister(&eurwdt_miscdev);
goto out;
}
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
deleted file mode 100644
index a62ef48..0000000
--- a/drivers/char/watchdog/i8xx_tco.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * i8xx_tco: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@redhat.com>
- *
- * The TCO timer is implemented in the following I/O controller hubs:
- * (See the intel documentation on http://developer.intel.com.)
- * 82801AA (ICH) : document number 290655-003, 290677-014,
- * 82801AB (ICHO) : document number 290655-003, 290677-014,
- * 82801BA (ICH2) : document number 290687-002, 298242-027,
- * 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
- * 82801CA (ICH3-S) : document number 290733-003, 290739-013,
- * 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
- * 82801DB (ICH4) : document number 290744-001, 290745-020,
- * 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
- * 82801E (C-ICH) : document number 273599-001, 273645-002,
- * 82801EB (ICH5) : document number 252516-001, 252517-003,
- * 82801ER (ICH5R) : document number 252516-001, 252517-003,
- *
- * 20000710 Nils Faerber
- * Initial Version 0.01
- * 20000728 Nils Faerber
- * 0.02 Fix for SMI_EN->TCO_EN bit, some cleanups
- * 20011214 Matt Domsch <Matt_Domsch@dell.com>
- * 0.03 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- * Didn't add timeout option as i810_margin already exists.
- * 20020224 Joel Becker, Wim Van Sebroeck
- * 0.04 Support for 82801CA(M) chipset, timer margin needs to be > 3,
- * add support for WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT.
- * 20020412 Rob Radez <rob@osinvestor.com>, Wim Van Sebroeck
- * 0.05 Fix possible timer_alive race, add expect close support,
- * clean up ioctls (WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS and
- * WDIOC_SETOPTIONS), made i810tco_getdevice __init,
- * removed boot_status, removed tco_timer_read,
- * added support for 82801DB and 82801E chipset,
- * added support for 82801EB and 8280ER chipset,
- * general cleanup.
- * 20030921 Wim Van Sebroeck <wim@iguana.be>
- * 0.06 change i810_margin to heartbeat, use module_param,
- * added notify system support, renamed module to i8xx_tco.
- * 20050128 Wim Van Sebroeck <wim@iguana.be>
- * 0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
- * chipsets. Also added support for the "undocumented" ICH7 chipset.
- * 20050807 Wim Van Sebroeck <wim@iguana.be>
- * 0.08 Make sure that the watchdog is only "armed" when started.
- * (Kernel Bug 4251)
- * 20060416 Wim Van Sebroeck <wim@iguana.be>
- * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
- * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
- * chipsets)
- */
-
-/*
- * Includes, defines, variables, module parameters, ...
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include "i8xx_tco.h"
-
-/* Module and version information */
-#define TCO_VERSION "0.09"
-#define TCO_MODULE_NAME "i8xx TCO timer"
-#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
-#define PFX TCO_MODULE_NAME ": "
-
-/* internal variables */
-static unsigned int ACPIBASE;
-static spinlock_t tco_lock; /* Guards the hardware */
-static unsigned long timer_alive;
-static char tco_expect_close;
-static struct pci_dev *i8xx_tco_pci;
-
-/* module parameters */
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (2<heartbeat<39) */
-static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/*
- * Some TCO specific functions
- */
-
-static inline unsigned char seconds_to_ticks(int seconds)
-{
- /* the internal timer is stored as ticks which decrement
- * every 0.6 seconds */
- return (seconds * 10) / 6;
-}
-
-static int tco_timer_start (void)
-{
- unsigned char val;
-
- spin_lock(&tco_lock);
-
- /* disable chipset's NO_REBOOT bit */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
- val &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
-
- /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
- val = inb (TCO1_CNT + 1);
- val &= 0xf7;
- outb (val, TCO1_CNT + 1);
- val = inb (TCO1_CNT + 1);
-
- spin_unlock(&tco_lock);
-
- if (val & 0x08)
- return -1;
- return 0;
-}
-
-static int tco_timer_stop (void)
-{
- unsigned char val, val1;
-
- spin_lock(&tco_lock);
- /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
- val = inb (TCO1_CNT + 1);
- val |= 0x08;
- outb (val, TCO1_CNT + 1);
- val = inb (TCO1_CNT + 1);
-
- /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- val1 |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
-
- spin_unlock(&tco_lock);
-
- if ((val & 0x08) == 0)
- return -1;
- return 0;
-}
-
-static int tco_timer_keepalive (void)
-{
- spin_lock(&tco_lock);
- /* Reload the timer by writing to the TCO Timer Reload register */
- outb (0x01, TCO1_RLD);
- spin_unlock(&tco_lock);
- return 0;
-}
-
-static int tco_timer_set_heartbeat (int t)
-{
- unsigned char val;
- unsigned char tmrval;
-
- tmrval = seconds_to_ticks(t);
- /* from the specs: */
- /* "Values of 0h-3h are ignored and should not be attempted" */
- if (tmrval > 0x3f || tmrval < 0x04)
- return -EINVAL;
-
- /* Write new heartbeat to watchdog */
- spin_lock(&tco_lock);
- val = inb (TCO1_TMR);
- val &= 0xc0;
- val |= tmrval;
- outb (val, TCO1_TMR);
- val = inb (TCO1_TMR);
- spin_unlock(&tco_lock);
-
- if ((val & 0x3f) != tmrval)
- return -EINVAL;
-
- heartbeat = t;
- return 0;
-}
-
-static int tco_timer_get_timeleft (int *time_left)
-{
- unsigned char val;
-
- spin_lock(&tco_lock);
-
- /* read the TCO Timer */
- val = inb (TCO1_RLD);
- val &= 0x3f;
-
- spin_unlock(&tco_lock);
-
- *time_left = (int)((val * 6) / 10);
-
- return 0;
-}
-
-/*
- * /dev/watchdog handling
- */
-
-static int i8xx_tco_open (struct inode *inode, struct file *file)
-{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &timer_alive))
- return -EBUSY;
-
- /*
- * Reload and activate timer
- */
- tco_timer_keepalive ();
- tco_timer_start ();
- return nonseekable_open(inode, file);
-}
-
-static int i8xx_tco_release (struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- */
- if (tco_expect_close == 42) {
- tco_timer_stop ();
- } else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
- tco_timer_keepalive ();
- }
- clear_bit(0, &timer_alive);
- tco_expect_close = 0;
- return 0;
-}
-
-static ssize_t i8xx_tco_write (struct file *file, const char __user *data,
- size_t len, loff_t * ppos)
-{
- /* See if we got the magic character 'V' and reload the timer */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* note: just in case someone wrote the magic character
- * five months ago... */
- tco_expect_close = 0;
-
- /* scan to see whether or not we got the magic character */
- for (i = 0; i != len; i++) {
- char c;
- if(get_user(c, data+i))
- return -EFAULT;
- if (c == 'V')
- tco_expect_close = 42;
- }
- }
-
- /* someone wrote to us, we should reload the timer */
- tco_timer_keepalive ();
- }
- return len;
-}
-
-static int i8xx_tco_ioctl (struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int new_options, retval = -EINVAL;
- int new_heartbeat;
- int time_left;
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = TCO_MODULE_NAME,
- };
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ident,
- sizeof (ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user (0, p);
-
- case WDIOC_KEEPALIVE:
- tco_timer_keepalive ();
- return 0;
-
- case WDIOC_SETOPTIONS:
- {
- if (get_user (new_options, p))
- return -EFAULT;
-
- if (new_options & WDIOS_DISABLECARD) {
- tco_timer_stop ();
- retval = 0;
- }
-
- if (new_options & WDIOS_ENABLECARD) {
- tco_timer_keepalive ();
- tco_timer_start ();
- retval = 0;
- }
-
- return retval;
- }
-
- case WDIOC_SETTIMEOUT:
- {
- if (get_user(new_heartbeat, p))
- return -EFAULT;
-
- if (tco_timer_set_heartbeat(new_heartbeat))
- return -EINVAL;
-
- tco_timer_keepalive ();
- /* Fall */
- }
-
- case WDIOC_GETTIMEOUT:
- return put_user(heartbeat, p);
-
- case WDIOC_GETTIMELEFT:
- {
- if (tco_timer_get_timeleft(&time_left))
- return -EINVAL;
-
- return put_user(time_left, p);
- }
-
- default:
- return -ENOTTY;
- }
-}
-
-/*
- * Notify system
- */
-
-static int i8xx_tco_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
-{
- if (code==SYS_DOWN || code==SYS_HALT) {
- /* Turn the WDT off */
- tco_timer_stop ();
- }
-
- return NOTIFY_DONE;
-}
-
-/*
- * Kernel Interfaces
- */
-
-static const struct file_operations i8xx_tco_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = i8xx_tco_write,
- .ioctl = i8xx_tco_ioctl,
- .open = i8xx_tco_open,
- .release = i8xx_tco_release,
-};
-
-static struct miscdevice i8xx_tco_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &i8xx_tco_fops,
-};
-
-static struct notifier_block i8xx_tco_notifier = {
- .notifier_call = i8xx_tco_notify_sys,
-};
-
-/*
- * Data for PCI driver interface
- *
- * This data only exists for exporting the supported
- * PCI ids via MODULE_DEVICE_TABLE. We do not actually
- * register a pci_driver, because someone else might one day
- * want to register another driver on the same PCI id.
- */
-static struct pci_device_id i8xx_tco_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1) },
- { }, /* End of list */
-};
-MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl);
-
-/*
- * Init & exit routines
- */
-
-static unsigned char __init i8xx_tco_getdevice (void)
-{
- struct pci_dev *dev = NULL;
- u8 val1, val2;
- u16 badr;
- /*
- * Find the PCI device
- */
-
- for_each_pci_dev(dev)
- if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
- i8xx_tco_pci = dev;
- break;
- }
-
- if (i8xx_tco_pci) {
- /*
- * Find the ACPI base I/O address which is the base
- * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
- * ACPIBASE is bits [15:7] from 0x40-0x43
- */
- pci_read_config_byte (i8xx_tco_pci, 0x40, &val1);
- pci_read_config_byte (i8xx_tco_pci, 0x41, &val2);
- badr = ((val2 << 1) | (val1 >> 7)) << 7;
- ACPIBASE = badr;
- /* Something's wrong here, ACPIBASE has to be set */
- if (badr == 0x0001 || badr == 0x0000) {
- printk (KERN_ERR PFX "failed to get TCOBASE address\n");
- pci_dev_put(i8xx_tco_pci);
- return 0;
- }
-
- /* Check chipset's NO_REBOOT bit */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- val1 &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- printk (KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
- pci_dev_put(i8xx_tco_pci);
- return 0; /* Cannot reset NO_REBOOT bit */
- }
- }
- /* Disable reboots untill the watchdog starts */
- val1 |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
-
- /* Set the TCO_EN bit in SMI_EN register */
- if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- SMI_EN + 1);
- pci_dev_put(i8xx_tco_pci);
- return 0;
- }
- val1 = inb (SMI_EN + 1);
- val1 &= 0xdf;
- outb (val1, SMI_EN + 1);
- release_region (SMI_EN + 1, 1);
- return 1;
- }
- return 0;
-}
-
-static int __init watchdog_init (void)
-{
- int ret;
-
- spin_lock_init(&tco_lock);
-
- /* Check whether or not the hardware watchdog is there */
- if (!i8xx_tco_getdevice () || i8xx_tco_pci == NULL)
- return -ENODEV;
-
- if (!request_region (TCOBASE, 0x10, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- TCOBASE);
- ret = -EIO;
- goto out;
- }
-
- /* Clear out the (probably old) status */
- outb (0, TCO1_STS);
- outb (3, TCO2_STS);
-
- /* Check that the heartbeat value is within it's range ; if not reset to the default */
- if (tco_timer_set_heartbeat (heartbeat)) {
- heartbeat = WATCHDOG_HEARTBEAT;
- tco_timer_set_heartbeat (heartbeat);
- printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39, using %d\n",
- heartbeat);
- }
-
- ret = register_reboot_notifier(&i8xx_tco_notifier);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
- goto unreg_region;
- }
-
- ret = misc_register(&i8xx_tco_miscdev);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- goto unreg_notifier;
- }
-
- tco_timer_stop ();
-
- printk (KERN_INFO PFX "initialized (0x%04x). heartbeat=%d sec (nowayout=%d)\n",
- TCOBASE, heartbeat, nowayout);
-
- return 0;
-
-unreg_notifier:
- unregister_reboot_notifier(&i8xx_tco_notifier);
-unreg_region:
- release_region (TCOBASE, 0x10);
-out:
- pci_dev_put(i8xx_tco_pci);
- return ret;
-}
-
-static void __exit watchdog_cleanup (void)
-{
- /* Stop the timer before we leave */
- if (!nowayout)
- tco_timer_stop ();
-
- /* Deregister */
- misc_deregister (&i8xx_tco_miscdev);
- unregister_reboot_notifier(&i8xx_tco_notifier);
- release_region (TCOBASE, 0x10);
-
- pci_dev_put(i8xx_tco_pci);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_cleanup);
-
-MODULE_AUTHOR("Nils Faerber");
-MODULE_DESCRIPTION("TCO timer driver for i8xx chipsets");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/i8xx_tco.h b/drivers/char/watchdog/i8xx_tco.h
deleted file mode 100644
index cc14eb8..0000000
--- a/drivers/char/watchdog/i8xx_tco.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * i8xx_tco: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@redhat.com>
- *
- * For history and the complete list of supported I/O Controller Hub's
- * see i8xx_tco.c
- */
-
-
-/*
- * Some address definitions for the TCO
- */
-
-#define TCOBASE ACPIBASE + 0x60 /* TCO base address */
-#define TCO1_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
-#define TCO1_TMR TCOBASE + 0x01 /* TCO Timer Initial Value */
-#define TCO1_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
-#define TCO1_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
-#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
-#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
-#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
-#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
-
-#define SMI_EN ACPIBASE + 0x30 /* SMI Control and Enable Register */
diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c
index 3c9684c..eac4f9b 100644
--- a/drivers/char/watchdog/iTCO_wdt.c
+++ b/drivers/char/watchdog/iTCO_wdt.c
@@ -571,7 +571,7 @@
* ACPIBASE is bits [15:7] from 0x40-0x43
*/
pci_read_config_dword(pdev, 0x40, &base_address);
- base_address &= 0x00007f80;
+ base_address &= 0x0000ff80;
if (base_address == 0x00000000) {
/* Something's wrong here, ACPIBASE has to be set */
printk(KERN_ERR PFX "failed to get TCOBASE address\n");
diff --git a/drivers/char/watchdog/ibmasr.c b/drivers/char/watchdog/ibmasr.c
index 8195f50..94155f6 100644
--- a/drivers/char/watchdog/ibmasr.c
+++ b/drivers/char/watchdog/ibmasr.c
@@ -367,18 +367,17 @@
if (!asr_type)
return -ENODEV;
+ rc = asr_get_base_address();
+ if (rc)
+ return rc;
+
rc = misc_register(&asr_miscdev);
if (rc < 0) {
+ release_region(asr_base, asr_length);
printk(KERN_ERR PFX "failed to register misc device\n");
return rc;
}
- rc = asr_get_base_address();
- if (rc) {
- misc_deregister(&asr_miscdev);
- return rc;
- }
-
return 0;
}
diff --git a/drivers/char/watchdog/machzwd.c b/drivers/char/watchdog/machzwd.c
index 76c7fa3..a0d2716 100644
--- a/drivers/char/watchdog/machzwd.c
+++ b/drivers/char/watchdog/machzwd.c
@@ -440,13 +440,6 @@
spin_lock_init(&zf_lock);
spin_lock_init(&zf_port_lock);
- ret = misc_register(&zf_miscdev);
- if (ret){
- printk(KERN_ERR "can't misc_register on minor=%d\n",
- WATCHDOG_MINOR);
- goto out;
- }
-
if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
printk(KERN_ERR "cannot reserve I/O ports at %d\n",
ZF_IOBASE);
@@ -461,16 +454,23 @@
goto no_reboot;
}
+ ret = misc_register(&zf_miscdev);
+ if (ret){
+ printk(KERN_ERR "can't misc_register on minor=%d\n",
+ WATCHDOG_MINOR);
+ goto no_misc;
+ }
+
zf_set_status(0);
zf_set_control(0);
return 0;
+no_misc:
+ unregister_reboot_notifier(&zf_notifier);
no_reboot:
release_region(ZF_IOBASE, 3);
no_region:
- misc_deregister(&zf_miscdev);
-out:
return ret;
}
diff --git a/drivers/char/watchdog/mtx-1_wdt.c b/drivers/char/watchdog/mtx-1_wdt.c
new file mode 100644
index 0000000..419ab44
--- /dev/null
+++ b/drivers/char/watchdog/mtx-1_wdt.c
@@ -0,0 +1,238 @@
+/*
+ * Driver for the MTX-1 Watchdog.
+ *
+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
+ * http://www.4g-systems.biz
+ *
+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
+ *
+ * Release 0.01.
+ * Author: Michael Stickel michael.stickel@4g-systems.biz
+ *
+ * Release 0.02.
+ * Author: Florian Fainelli florian@openwrt.org
+ * use the Linux watchdog/timer APIs
+ *
+ * The Watchdog is configured to reset the MTX-1
+ * if it is not triggered for 100 seconds.
+ * It should not be triggered more often than 1.6 seconds.
+ *
+ * A timer triggers the watchdog every 5 seconds, until
+ * it is opened for the first time. After the first open
+ * it MUST be triggered every 2..95 seconds.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/watchdog.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#define MTX1_WDT_INTERVAL (5 * HZ)
+
+static int ticks = 100 * HZ;
+
+static struct {
+ struct completion stop;
+ volatile int running;
+ struct timer_list timer;
+ volatile int queue;
+ int default_ticks;
+ unsigned long inuse;
+} mtx1_wdt_device;
+
+static void mtx1_wdt_trigger(unsigned long unused)
+{
+ u32 tmp;
+
+ if (mtx1_wdt_device.running)
+ ticks--;
+ /*
+ * toggle GPIO2_15
+ */
+ tmp = au_readl(GPIO2_DIR);
+ tmp = (tmp & ~(1<<15)) | ((~tmp) & (1<<15));
+ au_writel (tmp, GPIO2_DIR);
+
+ if (mtx1_wdt_device.queue && ticks)
+ mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
+ else {
+ complete(&mtx1_wdt_device.stop);
+ }
+}
+
+static void mtx1_wdt_reset(void)
+{
+ ticks = mtx1_wdt_device.default_ticks;
+}
+
+
+static void mtx1_wdt_start(void)
+{
+ if (!mtx1_wdt_device.queue) {
+ mtx1_wdt_device.queue = 1;
+ au_writel (au_readl(GPIO2_DIR) | (u32)(1<<15), GPIO2_DIR);
+ mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
+ }
+ mtx1_wdt_device.running++;
+}
+
+static int mtx1_wdt_stop(void)
+{
+ if (mtx1_wdt_device.queue) {
+ mtx1_wdt_device.queue = 0;
+ au_writel (au_readl(GPIO2_DIR) & ~((u32)(1<<15)), GPIO2_DIR);
+ }
+
+ ticks = mtx1_wdt_device.default_ticks;
+
+ return 0;
+}
+
+/* Filesystem functions */
+
+static int mtx1_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(0, &mtx1_wdt_device.inuse))
+ return -EBUSY;
+
+ return nonseekable_open(inode, file);
+}
+
+
+static int mtx1_wdt_release(struct inode *inode, struct file *file)
+{
+ clear_bit(0, &mtx1_wdt_device.inuse);
+ return 0;
+}
+
+static int mtx1_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ unsigned int value;
+ static struct watchdog_info ident =
+ {
+ .options = WDIOF_CARDRESET,
+ .identity = "MTX-1 WDT",
+ };
+
+ switch(cmd) {
+ case WDIOC_KEEPALIVE:
+ mtx1_wdt_reset();
+ break;
+ case WDIOC_GETSTATUS:
+ if ( copy_to_user(argp, &value, sizeof(int)) )
+ return -EFAULT;
+ break;
+ case WDIOC_GETSUPPORT:
+ if ( copy_to_user(argp, &ident, sizeof(ident)) )
+ return -EFAULT;
+ break;
+ case WDIOC_SETOPTIONS:
+ if ( copy_from_user(&value, argp, sizeof(int)) )
+ return -EFAULT;
+ switch(value) {
+ case WDIOS_ENABLECARD:
+ mtx1_wdt_start();
+ break;
+ case WDIOS_DISABLECARD:
+ return mtx1_wdt_stop();
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -ENOTTY;
+ }
+ return 0;
+}
+
+
+static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+{
+ if (!count)
+ return -EIO;
+
+ mtx1_wdt_reset();
+ return count;
+}
+
+static struct file_operations mtx1_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .ioctl = mtx1_wdt_ioctl,
+ .open = mtx1_wdt_open,
+ .write = mtx1_wdt_write,
+ .release = mtx1_wdt_release
+};
+
+
+static struct miscdevice mtx1_wdt_misc = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &mtx1_wdt_fops
+};
+
+
+static int __init mtx1_wdt_init(void)
+{
+ int ret;
+
+ if ((ret = misc_register(&mtx1_wdt_misc)) < 0) {
+ printk(KERN_ERR " mtx-1_wdt : failed to register\n");
+ return ret;
+ }
+
+ init_completion(&mtx1_wdt_device.stop);
+ mtx1_wdt_device.queue = 0;
+
+ clear_bit(0, &mtx1_wdt_device.inuse);
+
+ setup_timer(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0L);
+
+ mtx1_wdt_device.default_ticks = ticks;
+
+ mtx1_wdt_start();
+
+ printk(KERN_INFO "MTX-1 Watchdog driver\n");
+
+ return 0;
+}
+
+static void __exit mtx1_wdt_exit(void)
+{
+ if (mtx1_wdt_device.queue) {
+ mtx1_wdt_device.queue = 0;
+ wait_for_completion(&mtx1_wdt_device.stop);
+ }
+ misc_deregister(&mtx1_wdt_misc);
+}
+
+module_init(mtx1_wdt_init);
+module_exit(mtx1_wdt_exit);
+
+MODULE_AUTHOR("Michael Stickel, Florian Fainelli");
+MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c
index 6e8b570..7b41434 100644
--- a/drivers/char/watchdog/pcwd.c
+++ b/drivers/char/watchdog/pcwd.c
@@ -59,10 +59,10 @@
#include <linux/jiffies.h> /* For jiffies stuff */
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
#include <linux/watchdog.h> /* For the watchdog specific items */
-#include <linux/notifier.h> /* For notifier support */
-#include <linux/reboot.h> /* For reboot_notifier stuff */
+#include <linux/reboot.h> /* For kernel_power_off() */
#include <linux/init.h> /* For __init/__exit/... */
#include <linux/fs.h> /* For file operations */
+#include <linux/isa.h> /* For isa devices */
#include <linux/ioport.h> /* For io-port access */
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
@@ -70,8 +70,8 @@
#include <asm/io.h> /* For inb/outb/... */
/* Module and version information */
-#define WATCHDOG_VERSION "1.18"
-#define WATCHDOG_DATE "21 Jan 2007"
+#define WATCHDOG_VERSION "1.20"
+#define WATCHDOG_DATE "18 Feb 2007"
#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
#define WATCHDOG_NAME "pcwd"
#define PFX WATCHDOG_NAME ": "
@@ -89,6 +89,15 @@
#define PCWD_REVISION_C 2
/*
+ * These are the auto-probe addresses available.
+ *
+ * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
+ * Revision A has an address range of 2 addresses, while Revision C has 4.
+ */
+#define PCWD_ISA_NR_CARDS 3
+static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
+
+/*
* These are the defines that describe the control status bits for the
* PCI-PC Watchdog card.
*/
@@ -485,7 +494,7 @@
if (control_status & WD_T110) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
- printk (KERN_INFO PFX "Temperature overheat trip!\n");
+ printk(KERN_INFO PFX "Temperature overheat trip!\n");
kernel_power_off();
/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
}
@@ -497,7 +506,7 @@
if (control_status & WD_REVC_TTRP) {
*status |= WDIOF_OVERHEAT;
if (temp_panic) {
- printk (KERN_INFO PFX "Temperature overheat trip!\n");
+ printk(KERN_INFO PFX "Temperature overheat trip!\n");
kernel_power_off();
/* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */
}
@@ -734,20 +743,6 @@
}
/*
- * Notify system
- */
-
-static int pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
-{
- if (code==SYS_DOWN || code==SYS_HALT) {
- /* Turn the WDT off */
- pcwd_stop();
- }
-
- return NOTIFY_DONE;
-}
-
-/*
* Kernel Interfaces
*/
@@ -780,10 +775,6 @@
.fops = &pcwd_temp_fops,
};
-static struct notifier_block pcwd_notifier = {
- .notifier_call = pcwd_notify_sys,
-};
-
/*
* Init & exit routines
*/
@@ -803,10 +794,67 @@
return r;
}
-static int __devinit pcwatchdog_init(int base_addr)
+/*
+ * The ISA cards have a heartbeat bit in one of the registers, which
+ * register is card dependent. The heartbeat bit is monitored, and if
+ * found, is considered proof that a Berkshire card has been found.
+ * The initial rate is once per second at board start up, then twice
+ * per second for normal operation.
+ */
+static int __devinit pcwd_isa_match(struct device *dev, unsigned int id)
+{
+ int base_addr=pcwd_ioports[id];
+ int port0, last_port0; /* Reg 0, in case it's REV A */
+ int port1, last_port1; /* Register 1 for REV C cards */
+ int i;
+ int retval;
+
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n",
+ id);
+
+ if (!request_region (base_addr, 4, "PCWD")) {
+ printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
+ return 0;
+ }
+
+ retval = 0;
+
+ port0 = inb_p(base_addr); /* For REV A boards */
+ port1 = inb_p(base_addr + 1); /* For REV C boards */
+ if (port0 != 0xff || port1 != 0xff) {
+ /* Not an 'ff' from a floating bus, so must be a card! */
+ for (i = 0; i < 4; ++i) {
+
+ msleep(500);
+
+ last_port0 = port0;
+ last_port1 = port1;
+
+ port0 = inb_p(base_addr);
+ port1 = inb_p(base_addr + 1);
+
+ /* Has either hearbeat bit changed? */
+ if ((port0 ^ last_port0) & WD_HRTBT ||
+ (port1 ^ last_port1) & WD_REVC_HRBT) {
+ retval = 1;
+ break;
+ }
+ }
+ }
+ release_region (base_addr, 4);
+
+ return retval;
+}
+
+static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
{
int ret;
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_probe id=%d\n",
+ id);
+
cards_found++;
if (cards_found == 1)
printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER);
@@ -816,11 +864,13 @@
return -ENODEV;
}
- if (base_addr == 0x0000) {
+ if (pcwd_ioports[id] == 0x0000) {
printk(KERN_ERR PFX "No I/O-Address for card detected\n");
return -ENODEV;
}
- pcwd_private.io_addr = base_addr;
+ pcwd_private.io_addr = pcwd_ioports[id];
+
+ spin_lock_init(&pcwd_private.io_lock);
/* Check card's revision */
pcwd_private.revision = get_revision();
@@ -828,8 +878,8 @@
if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
pcwd_private.io_addr);
- pcwd_private.io_addr = 0x0000;
- return -EIO;
+ ret=-EIO;
+ goto error_request_region;
}
/* Initial variables */
@@ -865,24 +915,12 @@
WATCHDOG_HEARTBEAT);
}
- ret = register_reboot_notifier(&pcwd_notifier);
- if (ret) {
- printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
- ret);
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return ret;
- }
-
if (pcwd_private.supports_temp) {
ret = misc_register(&temp_miscdev);
if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
- unregister_reboot_notifier(&pcwd_notifier);
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return ret;
+ goto error_misc_register_temp;
}
}
@@ -890,22 +928,34 @@
if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
- if (pcwd_private.supports_temp)
- misc_deregister(&temp_miscdev);
- unregister_reboot_notifier(&pcwd_notifier);
- release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
- pcwd_private.io_addr = 0x0000;
- return ret;
+ goto error_misc_register_watchdog;
}
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
return 0;
+
+error_misc_register_watchdog:
+ if (pcwd_private.supports_temp)
+ misc_deregister(&temp_miscdev);
+error_misc_register_temp:
+ release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+error_request_region:
+ pcwd_private.io_addr = 0x0000;
+ cards_found--;
+ return ret;
}
-static void __devexit pcwatchdog_exit(void)
+static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id)
{
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_remove id=%d\n",
+ id);
+
+ if (!pcwd_private.io_addr)
+ return 1;
+
/* Disable the board */
if (!nowayout)
pcwd_stop();
@@ -914,102 +964,50 @@
misc_deregister(&pcwd_miscdev);
if (pcwd_private.supports_temp)
misc_deregister(&temp_miscdev);
- unregister_reboot_notifier(&pcwd_notifier);
release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
pcwd_private.io_addr = 0x0000;
cards_found--;
-}
-
-/*
- * The ISA cards have a heartbeat bit in one of the registers, which
- * register is card dependent. The heartbeat bit is monitored, and if
- * found, is considered proof that a Berkshire card has been found.
- * The initial rate is once per second at board start up, then twice
- * per second for normal operation.
- */
-static int __init pcwd_checkcard(int base_addr)
-{
- int port0, last_port0; /* Reg 0, in case it's REV A */
- int port1, last_port1; /* Register 1 for REV C cards */
- int i;
- int retval;
-
- if (!request_region (base_addr, 4, "PCWD")) {
- printk (KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr);
- return 0;
- }
-
- retval = 0;
-
- port0 = inb_p(base_addr); /* For REV A boards */
- port1 = inb_p(base_addr + 1); /* For REV C boards */
- if (port0 != 0xff || port1 != 0xff) {
- /* Not an 'ff' from a floating bus, so must be a card! */
- for (i = 0; i < 4; ++i) {
-
- msleep(500);
-
- last_port0 = port0;
- last_port1 = port1;
-
- port0 = inb_p(base_addr);
- port1 = inb_p(base_addr + 1);
-
- /* Has either hearbeat bit changed? */
- if ((port0 ^ last_port0) & WD_HRTBT ||
- (port1 ^ last_port1) & WD_REVC_HRBT) {
- retval = 1;
- break;
- }
- }
- }
- release_region (base_addr, 4);
-
- return retval;
-}
-
-/*
- * These are the auto-probe addresses available.
- *
- * Revision A only uses ports 0x270 and 0x370. Revision C introduced 0x350.
- * Revision A has an address range of 2 addresses, while Revision C has 4.
- */
-static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
-
-static int __init pcwd_init_module(void)
-{
- int i, found = 0;
-
- spin_lock_init(&pcwd_private.io_lock);
-
- for (i = 0; pcwd_ioports[i] != 0; i++) {
- if (pcwd_checkcard(pcwd_ioports[i])) {
- if (!(pcwatchdog_init(pcwd_ioports[i])))
- found++;
- }
- }
-
- if (!found) {
- printk (KERN_INFO PFX "No card detected, or port not available\n");
- return -ENODEV;
- }
return 0;
}
+static void pcwd_isa_shutdown(struct device *dev, unsigned int id)
+{
+ if (debug >= DEBUG)
+ printk(KERN_DEBUG PFX "pcwd_isa_shutdown id=%d\n",
+ id);
+
+ pcwd_stop();
+}
+
+static struct isa_driver pcwd_isa_driver = {
+ .match = pcwd_isa_match,
+ .probe = pcwd_isa_probe,
+ .remove = __devexit_p(pcwd_isa_remove),
+ .shutdown = pcwd_isa_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = WATCHDOG_NAME,
+ },
+};
+
+static int __init pcwd_init_module(void)
+{
+ return isa_register_driver(&pcwd_isa_driver, PCWD_ISA_NR_CARDS);
+}
+
static void __exit pcwd_cleanup_module(void)
{
- if (pcwd_private.io_addr)
- pcwatchdog_exit();
-
+ isa_unregister_driver(&pcwd_isa_driver);
printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
}
module_init(pcwd_init_module);
module_exit(pcwd_cleanup_module);
-MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>");
+MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, Wim Van Sebroeck <wim@iguana.be>");
MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
+MODULE_VERSION(WATCHDOG_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS_MISCDEV(TEMP_MINOR);
diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c
index 31037f9..1e7a671 100644
--- a/drivers/char/watchdog/pcwd_usb.c
+++ b/drivers/char/watchdog/pcwd_usb.c
@@ -146,7 +146,7 @@
atomic_t cmd_received; /* true if we received a report after a command */
int exists; /* Wether or not the device exists */
- struct semaphore sem; /* locks this structure */
+ struct mutex mtx; /* locks this structure */
};
static struct usb_pcwd_private *usb_pcwd_device;
@@ -635,7 +635,7 @@
usb_pcwd_device = usb_pcwd;
- init_MUTEX (&usb_pcwd->sem);
+ mutex_init(&usb_pcwd->mtx);
usb_pcwd->udev = udev;
usb_pcwd->interface = interface;
usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber;
@@ -763,7 +763,7 @@
usb_pcwd = usb_get_intfdata (interface);
usb_set_intfdata (interface, NULL);
- down (&usb_pcwd->sem);
+ mutex_lock(&usb_pcwd->mtx);
/* Stop the timer before we leave */
if (!nowayout)
@@ -777,7 +777,7 @@
misc_deregister(&usb_pcwd_temperature_miscdev);
unregister_reboot_notifier(&usb_pcwd_notifier);
- up (&usb_pcwd->sem);
+ mutex_unlock(&usb_pcwd->mtx);
/* Delete the USB PCWD device */
usb_pcwd_delete(usb_pcwd);
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index dff6cb5..20fa29c 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -379,14 +379,14 @@
DBG("probe: mapped wdt_base=%p\n", wdt_base);
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL) {
+ wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (wdt_irq == NULL) {
printk(KERN_INFO PFX "failed to get irq resource\n");
ret = -ENOENT;
goto err_map;
}
- ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev);
+ ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
if (ret != 0) {
printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
goto err_map;
diff --git a/drivers/char/watchdog/sbc8360.c b/drivers/char/watchdog/sbc8360.c
index 67ae426..285d852 100644
--- a/drivers/char/watchdog/sbc8360.c
+++ b/drivers/char/watchdog/sbc8360.c
@@ -333,18 +333,17 @@
int res;
unsigned long int mseconds = 60000;
- spin_lock_init(&sbc8360_lock);
- res = misc_register(&sbc8360_miscdev);
- if (res) {
- printk(KERN_ERR PFX "failed to register misc device\n");
- goto out_nomisc;
+ if (timeout < 0 || timeout > 63) {
+ printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
+ res = -EINVAL;
+ goto out;
}
if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) {
printk(KERN_ERR PFX "ENABLE method I/O %X is not available.\n",
SBC8360_ENABLE);
res = -EIO;
- goto out_noenablereg;
+ goto out;
}
if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) {
printk(KERN_ERR PFX
@@ -360,10 +359,11 @@
goto out_noreboot;
}
- if (timeout < 0 || timeout > 63) {
- printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
- res = -EINVAL;
- goto out_noreboot;
+ spin_lock_init(&sbc8360_lock);
+ res = misc_register(&sbc8360_miscdev);
+ if (res) {
+ printk(KERN_ERR PFX "failed to register misc device\n");
+ goto out_nomisc;
}
wd_margin = wd_times[timeout][0];
@@ -383,13 +383,13 @@
return 0;
- out_noreboot:
- release_region(SBC8360_ENABLE, 1);
- release_region(SBC8360_BASETIME, 1);
- out_noenablereg:
- out_nobasetimereg:
- misc_deregister(&sbc8360_miscdev);
out_nomisc:
+ unregister_reboot_notifier(&sbc8360_notifier);
+ out_noreboot:
+ release_region(SBC8360_BASETIME, 1);
+ out_nobasetimereg:
+ release_region(SBC8360_ENABLE, 1);
+ out:
return res;
}
diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c
index 337ee42..b46e7f4 100644
--- a/drivers/char/watchdog/w83627hf_wdt.c
+++ b/drivers/char/watchdog/w83627hf_wdt.c
@@ -1,5 +1,8 @@
/*
- * w83627hf WDT driver
+ * w83627hf/thf WDT driver
+ *
+ * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
+ * added support for W83627THF.
*
* (c) Copyright 2003 Pádraig Brady <P@draigBrady.com>
*
@@ -39,7 +42,7 @@
#include <asm/uaccess.h>
#include <asm/system.h>
-#define WATCHDOG_NAME "w83627hf WDT"
+#define WATCHDOG_NAME "w83627hf/thf WDT"
#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
@@ -50,7 +53,7 @@
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
module_param(wdt_io, int, 0);
-MODULE_PARM_DESC(wdt_io, "w83627hf WDT io port (default 0x2E)");
+MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
@@ -71,9 +74,19 @@
static void
w83627hf_select_wd_register(void)
{
+ unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
outb_p(0x87, WDT_EFER); /* Again according to manual */
+ outb(0x20, WDT_EFER); /* check chip version */
+ c = inb(WDT_EFDR);
+ if (c == 0x82) { /* W83627THF */
+ outb_p(0x2b, WDT_EFER); /* select GPIO3 */
+ c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
+ outb_p(0x2b, WDT_EFER);
+ outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
+ }
+
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
outb_p(0x30, WDT_EFER); /* select CR30 */
@@ -311,7 +324,7 @@
spin_lock_init(&io_lock);
- printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n");
+ printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF Super I/O chip initialising.\n");
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
@@ -367,5 +380,5 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
-MODULE_DESCRIPTION("w83627hf WDT driver");
+MODULE_DESCRIPTION("w83627hf/thf WDT driver");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index f4c6345..e678a33 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -56,4 +56,26 @@
To compile this driver as a module, choose M here: the module
will be called geode-aes.
+config ZCRYPT
+ tristate "Support for PCI-attached cryptographic adapters"
+ depends on S390
+ select ZCRYPT_MONOLITHIC if ZCRYPT="y"
+ default "m"
+ help
+ Select this option if you want to use a PCI-attached cryptographic
+ adapter like:
+ + PCI Cryptographic Accelerator (PCICA)
+ + PCI Cryptographic Coprocessor (PCICC)
+ + PCI-X Cryptographic Coprocessor (PCIXCC)
+ + Crypto Express2 Coprocessor (CEX2C)
+ + Crypto Express2 Accelerator (CEX2A)
+
+config ZCRYPT_MONOLITHIC
+ bool "Monolithic zcrypt module"
+ depends on ZCRYPT="m"
+ help
+ Select this option if you want to have a single module z90crypt.ko
+ that contains all parts of the crypto device driver (ap bus,
+ request router and all the card drivers).
+
endmenu
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 30d021d..72be6c6 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -3,6 +3,7 @@
#
menu "DMA Engine support"
+ depends on !S390
config DMA_ENGINE
bool "Support for DMA engines"
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 4f08984..807c402 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -7,6 +7,7 @@
#
menu 'EDAC - error detection and reporting (RAS) (EXPERIMENTAL)'
+ depends on HAS_IOMEM
config EDAC
tristate "EDAC core system error reporting (EXPERIMENTAL)"
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
new file mode 100644
index 0000000..5932c72
--- /dev/null
+++ b/drivers/firewire/Kconfig
@@ -0,0 +1,61 @@
+# -*- shell-script -*-
+
+comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
+ depends on EXPERIMENTAL=n
+
+config FIREWIRE
+ tristate "IEEE 1394 (FireWire) support (JUJU alternative stack, experimental)"
+ depends on EXPERIMENTAL
+ select CRC_ITU_T
+ help
+ IEEE 1394 describes a high performance serial bus, which is also
+ known as FireWire(tm) or i.Link(tm) and is used for connecting all
+ sorts of devices (most notably digital video cameras) to your
+ computer.
+
+ If you have FireWire hardware and want to use it, say Y here. This
+ is the core support only, you will also need to select a driver for
+ your IEEE 1394 adapter.
+
+ To compile this driver as a module, say M here: the module will be
+ called fw-core.
+
+ This is the "JUJU" FireWire stack, an alternative implementation
+ designed for robustness and simplicity. You can build either this
+ stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
+ or both.
+
+config FIREWIRE_OHCI
+ tristate "Support for OHCI FireWire host controllers"
+ depends on PCI && FIREWIRE
+ help
+ Enable this driver if you have a FireWire controller based
+ on the OHCI specification. For all practical purposes, this
+ is the only chipset in use, so say Y here.
+
+ To compile this driver as a module, say M here: The module will be
+ called fw-ohci.
+
+ If you also build ohci1394 of the classic IEEE 1394 driver stack,
+ blacklist either ohci1394 or fw-ohci to let hotplug load the desired
+ driver.
+
+config FIREWIRE_SBP2
+ tristate "Support for storage devices (SBP-2 protocol driver)"
+ depends on FIREWIRE && SCSI
+ help
+ This option enables you to use SBP-2 devices connected to a
+ FireWire bus. SBP-2 devices include storage devices like
+ harddisks and DVD drives, also some other FireWire devices
+ like scanners.
+
+ To compile this driver as a module, say M here: The module will be
+ called fw-sbp2.
+
+ You should also enable support for disks, CD-ROMs, etc. in the SCSI
+ configuration section.
+
+ If you also build sbp2 of the classic IEEE 1394 driver stack,
+ blacklist either sbp2 or fw-sbp2 to let hotplug load the desired
+ driver.
+
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
new file mode 100644
index 0000000..fc7d59d
--- /dev/null
+++ b/drivers/firewire/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Linux IEEE 1394 implementation
+#
+
+fw-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
+ fw-device.o fw-cdev.o
+
+obj-$(CONFIG_FIREWIRE) += fw-core.o
+obj-$(CONFIG_FIREWIRE_OHCI) += fw-ohci.o
+obj-$(CONFIG_FIREWIRE_SBP2) += fw-sbp2.o
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
new file mode 100644
index 0000000..636151a
--- /dev/null
+++ b/drivers/firewire/fw-card.c
@@ -0,0 +1,560 @@
+/*
+ * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/crc-itu-t.h>
+#include "fw-transaction.h"
+#include "fw-topology.h"
+#include "fw-device.h"
+
+int fw_compute_block_crc(u32 *block)
+{
+ __be32 be32_block[256];
+ int i, length;
+
+ length = (*block >> 16) & 0xff;
+ for (i = 0; i < length; i++)
+ be32_block[i] = cpu_to_be32(block[i + 1]);
+ *block |= crc_itu_t(0, (u8 *) be32_block, length * 4);
+
+ return length;
+}
+
+static DEFINE_MUTEX(card_mutex);
+static LIST_HEAD(card_list);
+
+static LIST_HEAD(descriptor_list);
+static int descriptor_count;
+
+#define BIB_CRC(v) ((v) << 0)
+#define BIB_CRC_LENGTH(v) ((v) << 16)
+#define BIB_INFO_LENGTH(v) ((v) << 24)
+
+#define BIB_LINK_SPEED(v) ((v) << 0)
+#define BIB_GENERATION(v) ((v) << 4)
+#define BIB_MAX_ROM(v) ((v) << 8)
+#define BIB_MAX_RECEIVE(v) ((v) << 12)
+#define BIB_CYC_CLK_ACC(v) ((v) << 16)
+#define BIB_PMC ((1) << 27)
+#define BIB_BMC ((1) << 28)
+#define BIB_ISC ((1) << 29)
+#define BIB_CMC ((1) << 30)
+#define BIB_IMC ((1) << 31)
+
+static u32 *
+generate_config_rom(struct fw_card *card, size_t *config_rom_length)
+{
+ struct fw_descriptor *desc;
+ static u32 config_rom[256];
+ int i, j, length;
+
+ /*
+ * Initialize contents of config rom buffer. On the OHCI
+ * controller, block reads to the config rom accesses the host
+ * memory, but quadlet read access the hardware bus info block
+ * registers. That's just crack, but it means we should make
+ * sure the contents of bus info block in host memory mathces
+ * the version stored in the OHCI registers.
+ */
+
+ memset(config_rom, 0, sizeof(config_rom));
+ config_rom[0] = BIB_CRC_LENGTH(4) | BIB_INFO_LENGTH(4) | BIB_CRC(0);
+ config_rom[1] = 0x31333934;
+
+ config_rom[2] =
+ BIB_LINK_SPEED(card->link_speed) |
+ BIB_GENERATION(card->config_rom_generation++ % 14 + 2) |
+ BIB_MAX_ROM(2) |
+ BIB_MAX_RECEIVE(card->max_receive) |
+ BIB_BMC | BIB_ISC | BIB_CMC | BIB_IMC;
+ config_rom[3] = card->guid >> 32;
+ config_rom[4] = card->guid;
+
+ /* Generate root directory. */
+ i = 5;
+ config_rom[i++] = 0;
+ config_rom[i++] = 0x0c0083c0; /* node capabilities */
+ j = i + descriptor_count;
+
+ /* Generate root directory entries for descriptors. */
+ list_for_each_entry (desc, &descriptor_list, link) {
+ if (desc->immediate > 0)
+ config_rom[i++] = desc->immediate;
+ config_rom[i] = desc->key | (j - i);
+ i++;
+ j += desc->length;
+ }
+
+ /* Update root directory length. */
+ config_rom[5] = (i - 5 - 1) << 16;
+
+ /* End of root directory, now copy in descriptors. */
+ list_for_each_entry (desc, &descriptor_list, link) {
+ memcpy(&config_rom[i], desc->data, desc->length * 4);
+ i += desc->length;
+ }
+
+ /* Calculate CRCs for all blocks in the config rom. This
+ * assumes that CRC length and info length are identical for
+ * the bus info block, which is always the case for this
+ * implementation. */
+ for (i = 0; i < j; i += length + 1)
+ length = fw_compute_block_crc(config_rom + i);
+
+ *config_rom_length = j;
+
+ return config_rom;
+}
+
+static void
+update_config_roms(void)
+{
+ struct fw_card *card;
+ u32 *config_rom;
+ size_t length;
+
+ list_for_each_entry (card, &card_list, link) {
+ config_rom = generate_config_rom(card, &length);
+ card->driver->set_config_rom(card, config_rom, length);
+ }
+}
+
+int
+fw_core_add_descriptor(struct fw_descriptor *desc)
+{
+ size_t i;
+
+ /*
+ * Check descriptor is valid; the length of all blocks in the
+ * descriptor has to add up to exactly the length of the
+ * block.
+ */
+ i = 0;
+ while (i < desc->length)
+ i += (desc->data[i] >> 16) + 1;
+
+ if (i != desc->length)
+ return -EINVAL;
+
+ mutex_lock(&card_mutex);
+
+ list_add_tail(&desc->link, &descriptor_list);
+ descriptor_count++;
+ if (desc->immediate > 0)
+ descriptor_count++;
+ update_config_roms();
+
+ mutex_unlock(&card_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(fw_core_add_descriptor);
+
+void
+fw_core_remove_descriptor(struct fw_descriptor *desc)
+{
+ mutex_lock(&card_mutex);
+
+ list_del(&desc->link);
+ descriptor_count--;
+ if (desc->immediate > 0)
+ descriptor_count--;
+ update_config_roms();
+
+ mutex_unlock(&card_mutex);
+}
+EXPORT_SYMBOL(fw_core_remove_descriptor);
+
+static const char gap_count_table[] = {
+ 63, 5, 7, 8, 10, 13, 16, 18, 21, 24, 26, 29, 32, 35, 37, 40
+};
+
+struct bm_data {
+ struct fw_transaction t;
+ struct {
+ __be32 arg;
+ __be32 data;
+ } lock;
+ u32 old;
+ int rcode;
+ struct completion done;
+};
+
+static void
+complete_bm_lock(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
+{
+ struct bm_data *bmd = data;
+
+ if (rcode == RCODE_COMPLETE)
+ bmd->old = be32_to_cpu(*(__be32 *) payload);
+ bmd->rcode = rcode;
+ complete(&bmd->done);
+}
+
+static void
+fw_card_bm_work(struct work_struct *work)
+{
+ struct fw_card *card = container_of(work, struct fw_card, work.work);
+ struct fw_device *root;
+ struct bm_data bmd;
+ unsigned long flags;
+ int root_id, new_root_id, irm_id, gap_count, generation, grace;
+ int do_reset = 0;
+
+ spin_lock_irqsave(&card->lock, flags);
+
+ generation = card->generation;
+ root = card->root_node->data;
+ root_id = card->root_node->node_id;
+ grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10));
+
+ if (card->bm_generation + 1 == generation ||
+ (card->bm_generation != generation && grace)) {
+ /*
+ * This first step is to figure out who is IRM and
+ * then try to become bus manager. If the IRM is not
+ * well defined (e.g. does not have an active link
+ * layer or does not responds to our lock request, we
+ * will have to do a little vigilante bus management.
+ * In that case, we do a goto into the gap count logic
+ * so that when we do the reset, we still optimize the
+ * gap count. That could well save a reset in the
+ * next generation.
+ */
+
+ irm_id = card->irm_node->node_id;
+ if (!card->irm_node->link_on) {
+ new_root_id = card->local_node->node_id;
+ fw_notify("IRM has link off, making local node (%02x) root.\n",
+ new_root_id);
+ goto pick_me;
+ }
+
+ bmd.lock.arg = cpu_to_be32(0x3f);
+ bmd.lock.data = cpu_to_be32(card->local_node->node_id);
+
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ init_completion(&bmd.done);
+ fw_send_request(card, &bmd.t, TCODE_LOCK_COMPARE_SWAP,
+ irm_id, generation,
+ SCODE_100, CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
+ &bmd.lock, sizeof(bmd.lock),
+ complete_bm_lock, &bmd);
+ wait_for_completion(&bmd.done);
+
+ if (bmd.rcode == RCODE_GENERATION) {
+ /*
+ * Another bus reset happened. Just return,
+ * the BM work has been rescheduled.
+ */
+ return;
+ }
+
+ if (bmd.rcode == RCODE_COMPLETE && bmd.old != 0x3f)
+ /* Somebody else is BM, let them do the work. */
+ return;
+
+ spin_lock_irqsave(&card->lock, flags);
+ if (bmd.rcode != RCODE_COMPLETE) {
+ /*
+ * The lock request failed, maybe the IRM
+ * isn't really IRM capable after all. Let's
+ * do a bus reset and pick the local node as
+ * root, and thus, IRM.
+ */
+ new_root_id = card->local_node->node_id;
+ fw_notify("BM lock failed, making local node (%02x) root.\n",
+ new_root_id);
+ goto pick_me;
+ }
+ } else if (card->bm_generation != generation) {
+ /*
+ * OK, we weren't BM in the last generation, and it's
+ * less than 100ms since last bus reset. Reschedule
+ * this task 100ms from now.
+ */
+ spin_unlock_irqrestore(&card->lock, flags);
+ schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10));
+ return;
+ }
+
+ /*
+ * We're bus manager for this generation, so next step is to
+ * make sure we have an active cycle master and do gap count
+ * optimization.
+ */
+ card->bm_generation = generation;
+
+ if (root == NULL) {
+ /*
+ * Either link_on is false, or we failed to read the
+ * config rom. In either case, pick another root.
+ */
+ new_root_id = card->local_node->node_id;
+ } else if (atomic_read(&root->state) != FW_DEVICE_RUNNING) {
+ /*
+ * If we haven't probed this device yet, bail out now
+ * and let's try again once that's done.
+ */
+ spin_unlock_irqrestore(&card->lock, flags);
+ return;
+ } else if (root->config_rom[2] & BIB_CMC) {
+ /*
+ * FIXME: I suppose we should set the cmstr bit in the
+ * STATE_CLEAR register of this node, as described in
+ * 1394-1995, 8.4.2.6. Also, send out a force root
+ * packet for this node.
+ */
+ new_root_id = root_id;
+ } else {
+ /*
+ * Current root has an active link layer and we
+ * successfully read the config rom, but it's not
+ * cycle master capable.
+ */
+ new_root_id = card->local_node->node_id;
+ }
+
+ pick_me:
+ /* Now figure out what gap count to set. */
+ if (card->topology_type == FW_TOPOLOGY_A &&
+ card->root_node->max_hops < ARRAY_SIZE(gap_count_table))
+ gap_count = gap_count_table[card->root_node->max_hops];
+ else
+ gap_count = 63;
+
+ /*
+ * Finally, figure out if we should do a reset or not. If we've
+ * done less that 5 resets with the same physical topology and we
+ * have either a new root or a new gap count setting, let's do it.
+ */
+
+ if (card->bm_retries++ < 5 &&
+ (card->gap_count != gap_count || new_root_id != root_id))
+ do_reset = 1;
+
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (do_reset) {
+ fw_notify("phy config: card %d, new root=%x, gap_count=%d\n",
+ card->index, new_root_id, gap_count);
+ fw_send_phy_config(card, new_root_id, generation, gap_count);
+ fw_core_initiate_bus_reset(card, 1);
+ }
+}
+
+static void
+flush_timer_callback(unsigned long data)
+{
+ struct fw_card *card = (struct fw_card *)data;
+
+ fw_flush_transactions(card);
+}
+
+void
+fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver,
+ struct device *device)
+{
+ static atomic_t index = ATOMIC_INIT(-1);
+
+ kref_init(&card->kref);
+ card->index = atomic_inc_return(&index);
+ card->driver = driver;
+ card->device = device;
+ card->current_tlabel = 0;
+ card->tlabel_mask = 0;
+ card->color = 0;
+
+ INIT_LIST_HEAD(&card->transaction_list);
+ spin_lock_init(&card->lock);
+ setup_timer(&card->flush_timer,
+ flush_timer_callback, (unsigned long)card);
+
+ card->local_node = NULL;
+
+ INIT_DELAYED_WORK(&card->work, fw_card_bm_work);
+}
+EXPORT_SYMBOL(fw_card_initialize);
+
+int
+fw_card_add(struct fw_card *card,
+ u32 max_receive, u32 link_speed, u64 guid)
+{
+ u32 *config_rom;
+ size_t length;
+
+ card->max_receive = max_receive;
+ card->link_speed = link_speed;
+ card->guid = guid;
+
+ /* Activate link_on bit and contender bit in our self ID packets.*/
+ if (card->driver->update_phy_reg(card, 4, 0,
+ PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
+ return -EIO;
+
+ /*
+ * The subsystem grabs a reference when the card is added and
+ * drops it when the driver calls fw_core_remove_card.
+ */
+ fw_card_get(card);
+
+ mutex_lock(&card_mutex);
+ config_rom = generate_config_rom(card, &length);
+ list_add_tail(&card->link, &card_list);
+ mutex_unlock(&card_mutex);
+
+ return card->driver->enable(card, config_rom, length);
+}
+EXPORT_SYMBOL(fw_card_add);
+
+
+/*
+ * The next few functions implements a dummy driver that use once a
+ * card driver shuts down an fw_card. This allows the driver to
+ * cleanly unload, as all IO to the card will be handled by the dummy
+ * driver instead of calling into the (possibly) unloaded module. The
+ * dummy driver just fails all IO.
+ */
+
+static int
+dummy_enable(struct fw_card *card, u32 *config_rom, size_t length)
+{
+ BUG();
+ return -1;
+}
+
+static int
+dummy_update_phy_reg(struct fw_card *card, int address,
+ int clear_bits, int set_bits)
+{
+ return -ENODEV;
+}
+
+static int
+dummy_set_config_rom(struct fw_card *card,
+ u32 *config_rom, size_t length)
+{
+ /*
+ * We take the card out of card_list before setting the dummy
+ * driver, so this should never get called.
+ */
+ BUG();
+ return -1;
+}
+
+static void
+dummy_send_request(struct fw_card *card, struct fw_packet *packet)
+{
+ packet->callback(packet, card, -ENODEV);
+}
+
+static void
+dummy_send_response(struct fw_card *card, struct fw_packet *packet)
+{
+ packet->callback(packet, card, -ENODEV);
+}
+
+static int
+dummy_cancel_packet(struct fw_card *card, struct fw_packet *packet)
+{
+ return -ENOENT;
+}
+
+static int
+dummy_enable_phys_dma(struct fw_card *card,
+ int node_id, int generation)
+{
+ return -ENODEV;
+}
+
+static struct fw_card_driver dummy_driver = {
+ .name = "dummy",
+ .enable = dummy_enable,
+ .update_phy_reg = dummy_update_phy_reg,
+ .set_config_rom = dummy_set_config_rom,
+ .send_request = dummy_send_request,
+ .cancel_packet = dummy_cancel_packet,
+ .send_response = dummy_send_response,
+ .enable_phys_dma = dummy_enable_phys_dma,
+};
+
+void
+fw_core_remove_card(struct fw_card *card)
+{
+ card->driver->update_phy_reg(card, 4,
+ PHY_LINK_ACTIVE | PHY_CONTENDER, 0);
+ fw_core_initiate_bus_reset(card, 1);
+
+ mutex_lock(&card_mutex);
+ list_del(&card->link);
+ mutex_unlock(&card_mutex);
+
+ /* Set up the dummy driver. */
+ card->driver = &dummy_driver;
+
+ fw_flush_transactions(card);
+
+ fw_destroy_nodes(card);
+
+ fw_card_put(card);
+}
+EXPORT_SYMBOL(fw_core_remove_card);
+
+struct fw_card *
+fw_card_get(struct fw_card *card)
+{
+ kref_get(&card->kref);
+
+ return card;
+}
+EXPORT_SYMBOL(fw_card_get);
+
+static void
+release_card(struct kref *kref)
+{
+ struct fw_card *card = container_of(kref, struct fw_card, kref);
+
+ kfree(card);
+}
+
+/*
+ * An assumption for fw_card_put() is that the card driver allocates
+ * the fw_card struct with kalloc and that it has been shut down
+ * before the last ref is dropped.
+ */
+void
+fw_card_put(struct fw_card *card)
+{
+ kref_put(&card->kref, release_card);
+}
+EXPORT_SYMBOL(fw_card_put);
+
+int
+fw_core_initiate_bus_reset(struct fw_card *card, int short_reset)
+{
+ int reg = short_reset ? 5 : 1;
+ int bit = short_reset ? PHY_BUS_SHORT_RESET : PHY_BUS_RESET;
+
+ return card->driver->update_phy_reg(card, reg, 0, bit);
+}
+EXPORT_SYMBOL(fw_core_initiate_bus_reset);
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
new file mode 100644
index 0000000..0fa5bd5
--- /dev/null
+++ b/drivers/firewire/fw-cdev.c
@@ -0,0 +1,961 @@
+/*
+ * Char device for device raw access
+ *
+ * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/vmalloc.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/idr.h>
+#include <linux/compat.h>
+#include <linux/firewire-cdev.h>
+#include <asm/uaccess.h>
+#include "fw-transaction.h"
+#include "fw-topology.h"
+#include "fw-device.h"
+
+struct client;
+struct client_resource {
+ struct list_head link;
+ void (*release)(struct client *client, struct client_resource *r);
+ u32 handle;
+};
+
+/*
+ * dequeue_event() just kfree()'s the event, so the event has to be
+ * the first field in the struct.
+ */
+
+struct event {
+ struct { void *data; size_t size; } v[2];
+ struct list_head link;
+};
+
+struct bus_reset {
+ struct event event;
+ struct fw_cdev_event_bus_reset reset;
+};
+
+struct response {
+ struct event event;
+ struct fw_transaction transaction;
+ struct client *client;
+ struct client_resource resource;
+ struct fw_cdev_event_response response;
+};
+
+struct iso_interrupt {
+ struct event event;
+ struct fw_cdev_event_iso_interrupt interrupt;
+};
+
+struct client {
+ u32 version;
+ struct fw_device *device;
+ spinlock_t lock;
+ u32 resource_handle;
+ struct list_head resource_list;
+ struct list_head event_list;
+ wait_queue_head_t wait;
+ u64 bus_reset_closure;
+
+ struct fw_iso_context *iso_context;
+ u64 iso_closure;
+ struct fw_iso_buffer buffer;
+ unsigned long vm_start;
+
+ struct list_head link;
+};
+
+static inline void __user *
+u64_to_uptr(__u64 value)
+{
+ return (void __user *)(unsigned long)value;
+}
+
+static inline __u64
+uptr_to_u64(void __user *ptr)
+{
+ return (__u64)(unsigned long)ptr;
+}
+
+static int fw_device_op_open(struct inode *inode, struct file *file)
+{
+ struct fw_device *device;
+ struct client *client;
+ unsigned long flags;
+
+ device = fw_device_from_devt(inode->i_rdev);
+ if (device == NULL)
+ return -ENODEV;
+
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
+ if (client == NULL)
+ return -ENOMEM;
+
+ client->device = fw_device_get(device);
+ INIT_LIST_HEAD(&client->event_list);
+ INIT_LIST_HEAD(&client->resource_list);
+ spin_lock_init(&client->lock);
+ init_waitqueue_head(&client->wait);
+
+ file->private_data = client;
+
+ spin_lock_irqsave(&device->card->lock, flags);
+ list_add_tail(&client->link, &device->client_list);
+ spin_unlock_irqrestore(&device->card->lock, flags);
+
+ return 0;
+}
+
+static void queue_event(struct client *client, struct event *event,
+ void *data0, size_t size0, void *data1, size_t size1)
+{
+ unsigned long flags;
+
+ event->v[0].data = data0;
+ event->v[0].size = size0;
+ event->v[1].data = data1;
+ event->v[1].size = size1;
+
+ spin_lock_irqsave(&client->lock, flags);
+
+ list_add_tail(&event->link, &client->event_list);
+ wake_up_interruptible(&client->wait);
+
+ spin_unlock_irqrestore(&client->lock, flags);
+}
+
+static int
+dequeue_event(struct client *client, char __user *buffer, size_t count)
+{
+ unsigned long flags;
+ struct event *event;
+ size_t size, total;
+ int i, retval;
+
+ retval = wait_event_interruptible(client->wait,
+ !list_empty(&client->event_list) ||
+ fw_device_is_shutdown(client->device));
+ if (retval < 0)
+ return retval;
+
+ if (list_empty(&client->event_list) &&
+ fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
+ spin_lock_irqsave(&client->lock, flags);
+ event = container_of(client->event_list.next, struct event, link);
+ list_del(&event->link);
+ spin_unlock_irqrestore(&client->lock, flags);
+
+ total = 0;
+ for (i = 0; i < ARRAY_SIZE(event->v) && total < count; i++) {
+ size = min(event->v[i].size, count - total);
+ if (copy_to_user(buffer + total, event->v[i].data, size)) {
+ retval = -EFAULT;
+ goto out;
+ }
+ total += size;
+ }
+ retval = total;
+
+ out:
+ kfree(event);
+
+ return retval;
+}
+
+static ssize_t
+fw_device_op_read(struct file *file,
+ char __user *buffer, size_t count, loff_t *offset)
+{
+ struct client *client = file->private_data;
+
+ return dequeue_event(client, buffer, count);
+}
+
+static void
+fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
+ struct client *client)
+{
+ struct fw_card *card = client->device->card;
+
+ event->closure = client->bus_reset_closure;
+ event->type = FW_CDEV_EVENT_BUS_RESET;
+ event->node_id = client->device->node_id;
+ event->local_node_id = card->local_node->node_id;
+ event->bm_node_id = 0; /* FIXME: We don't track the BM. */
+ event->irm_node_id = card->irm_node->node_id;
+ event->root_node_id = card->root_node->node_id;
+ event->generation = card->generation;
+}
+
+static void
+for_each_client(struct fw_device *device,
+ void (*callback)(struct client *client))
+{
+ struct fw_card *card = device->card;
+ struct client *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+
+ list_for_each_entry(c, &device->client_list, link)
+ callback(c);
+
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static void
+queue_bus_reset_event(struct client *client)
+{
+ struct bus_reset *bus_reset;
+
+ bus_reset = kzalloc(sizeof(*bus_reset), GFP_ATOMIC);
+ if (bus_reset == NULL) {
+ fw_notify("Out of memory when allocating bus reset event\n");
+ return;
+ }
+
+ fill_bus_reset_event(&bus_reset->reset, client);
+
+ queue_event(client, &bus_reset->event,
+ &bus_reset->reset, sizeof(bus_reset->reset), NULL, 0);
+}
+
+void fw_device_cdev_update(struct fw_device *device)
+{
+ for_each_client(device, queue_bus_reset_event);
+}
+
+static void wake_up_client(struct client *client)
+{
+ wake_up_interruptible(&client->wait);
+}
+
+void fw_device_cdev_remove(struct fw_device *device)
+{
+ for_each_client(device, wake_up_client);
+}
+
+static int ioctl_get_info(struct client *client, void *buffer)
+{
+ struct fw_cdev_get_info *get_info = buffer;
+ struct fw_cdev_event_bus_reset bus_reset;
+
+ client->version = get_info->version;
+ get_info->version = FW_CDEV_VERSION;
+
+ if (get_info->rom != 0) {
+ void __user *uptr = u64_to_uptr(get_info->rom);
+ size_t want = get_info->rom_length;
+ size_t have = client->device->config_rom_length * 4;
+
+ if (copy_to_user(uptr, client->device->config_rom,
+ min(want, have)))
+ return -EFAULT;
+ }
+ get_info->rom_length = client->device->config_rom_length * 4;
+
+ client->bus_reset_closure = get_info->bus_reset_closure;
+ if (get_info->bus_reset != 0) {
+ void __user *uptr = u64_to_uptr(get_info->bus_reset);
+
+ fill_bus_reset_event(&bus_reset, client);
+ if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset)))
+ return -EFAULT;
+ }
+
+ get_info->card = client->device->card->index;
+
+ return 0;
+}
+
+static void
+add_client_resource(struct client *client, struct client_resource *resource)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&client->lock, flags);
+ list_add_tail(&resource->link, &client->resource_list);
+ resource->handle = client->resource_handle++;
+ spin_unlock_irqrestore(&client->lock, flags);
+}
+
+static int
+release_client_resource(struct client *client, u32 handle,
+ struct client_resource **resource)
+{
+ struct client_resource *r;
+ unsigned long flags;
+
+ spin_lock_irqsave(&client->lock, flags);
+ list_for_each_entry(r, &client->resource_list, link) {
+ if (r->handle == handle) {
+ list_del(&r->link);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&client->lock, flags);
+
+ if (&r->link == &client->resource_list)
+ return -EINVAL;
+
+ if (resource)
+ *resource = r;
+ else
+ r->release(client, r);
+
+ return 0;
+}
+
+static void
+release_transaction(struct client *client, struct client_resource *resource)
+{
+ struct response *response =
+ container_of(resource, struct response, resource);
+
+ fw_cancel_transaction(client->device->card, &response->transaction);
+}
+
+static void
+complete_transaction(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
+{
+ struct response *response = data;
+ struct client *client = response->client;
+ unsigned long flags;
+
+ if (length < response->response.length)
+ response->response.length = length;
+ if (rcode == RCODE_COMPLETE)
+ memcpy(response->response.data, payload,
+ response->response.length);
+
+ spin_lock_irqsave(&client->lock, flags);
+ list_del(&response->resource.link);
+ spin_unlock_irqrestore(&client->lock, flags);
+
+ response->response.type = FW_CDEV_EVENT_RESPONSE;
+ response->response.rcode = rcode;
+ queue_event(client, &response->event,
+ &response->response, sizeof(response->response),
+ response->response.data, response->response.length);
+}
+
+static ssize_t ioctl_send_request(struct client *client, void *buffer)
+{
+ struct fw_device *device = client->device;
+ struct fw_cdev_send_request *request = buffer;
+ struct response *response;
+
+ /* What is the biggest size we'll accept, really? */
+ if (request->length > 4096)
+ return -EINVAL;
+
+ response = kmalloc(sizeof(*response) + request->length, GFP_KERNEL);
+ if (response == NULL)
+ return -ENOMEM;
+
+ response->client = client;
+ response->response.length = request->length;
+ response->response.closure = request->closure;
+
+ if (request->data &&
+ copy_from_user(response->response.data,
+ u64_to_uptr(request->data), request->length)) {
+ kfree(response);
+ return -EFAULT;
+ }
+
+ response->resource.release = release_transaction;
+ add_client_resource(client, &response->resource);
+
+ fw_send_request(device->card, &response->transaction,
+ request->tcode & 0x1f,
+ device->node->node_id,
+ request->generation,
+ device->node->max_speed,
+ request->offset,
+ response->response.data, request->length,
+ complete_transaction, response);
+
+ if (request->data)
+ return sizeof(request) + request->length;
+ else
+ return sizeof(request);
+}
+
+struct address_handler {
+ struct fw_address_handler handler;
+ __u64 closure;
+ struct client *client;
+ struct client_resource resource;
+};
+
+struct request {
+ struct fw_request *request;
+ void *data;
+ size_t length;
+ struct client_resource resource;
+};
+
+struct request_event {
+ struct event event;
+ struct fw_cdev_event_request request;
+};
+
+static void
+release_request(struct client *client, struct client_resource *resource)
+{
+ struct request *request =
+ container_of(resource, struct request, resource);
+
+ fw_send_response(client->device->card, request->request,
+ RCODE_CONFLICT_ERROR);
+ kfree(request);
+}
+
+static void
+handle_request(struct fw_card *card, struct fw_request *r,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *payload, size_t length, void *callback_data)
+{
+ struct address_handler *handler = callback_data;
+ struct request *request;
+ struct request_event *e;
+ struct client *client = handler->client;
+
+ request = kmalloc(sizeof(*request), GFP_ATOMIC);
+ e = kmalloc(sizeof(*e), GFP_ATOMIC);
+ if (request == NULL || e == NULL) {
+ kfree(request);
+ kfree(e);
+ fw_send_response(card, r, RCODE_CONFLICT_ERROR);
+ return;
+ }
+
+ request->request = r;
+ request->data = payload;
+ request->length = length;
+
+ request->resource.release = release_request;
+ add_client_resource(client, &request->resource);
+
+ e->request.type = FW_CDEV_EVENT_REQUEST;
+ e->request.tcode = tcode;
+ e->request.offset = offset;
+ e->request.length = length;
+ e->request.handle = request->resource.handle;
+ e->request.closure = handler->closure;
+
+ queue_event(client, &e->event,
+ &e->request, sizeof(e->request), payload, length);
+}
+
+static void
+release_address_handler(struct client *client,
+ struct client_resource *resource)
+{
+ struct address_handler *handler =
+ container_of(resource, struct address_handler, resource);
+
+ fw_core_remove_address_handler(&handler->handler);
+ kfree(handler);
+}
+
+static int ioctl_allocate(struct client *client, void *buffer)
+{
+ struct fw_cdev_allocate *request = buffer;
+ struct address_handler *handler;
+ struct fw_address_region region;
+
+ handler = kmalloc(sizeof(*handler), GFP_KERNEL);
+ if (handler == NULL)
+ return -ENOMEM;
+
+ region.start = request->offset;
+ region.end = request->offset + request->length;
+ handler->handler.length = request->length;
+ handler->handler.address_callback = handle_request;
+ handler->handler.callback_data = handler;
+ handler->closure = request->closure;
+ handler->client = client;
+
+ if (fw_core_add_address_handler(&handler->handler, ®ion) < 0) {
+ kfree(handler);
+ return -EBUSY;
+ }
+
+ handler->resource.release = release_address_handler;
+ add_client_resource(client, &handler->resource);
+ request->handle = handler->resource.handle;
+
+ return 0;
+}
+
+static int ioctl_deallocate(struct client *client, void *buffer)
+{
+ struct fw_cdev_deallocate *request = buffer;
+
+ return release_client_resource(client, request->handle, NULL);
+}
+
+static int ioctl_send_response(struct client *client, void *buffer)
+{
+ struct fw_cdev_send_response *request = buffer;
+ struct client_resource *resource;
+ struct request *r;
+
+ if (release_client_resource(client, request->handle, &resource) < 0)
+ return -EINVAL;
+ r = container_of(resource, struct request, resource);
+ if (request->length < r->length)
+ r->length = request->length;
+ if (copy_from_user(r->data, u64_to_uptr(request->data), r->length))
+ return -EFAULT;
+
+ fw_send_response(client->device->card, r->request, request->rcode);
+ kfree(r);
+
+ return 0;
+}
+
+static int ioctl_initiate_bus_reset(struct client *client, void *buffer)
+{
+ struct fw_cdev_initiate_bus_reset *request = buffer;
+ int short_reset;
+
+ short_reset = (request->type == FW_CDEV_SHORT_RESET);
+
+ return fw_core_initiate_bus_reset(client->device->card, short_reset);
+}
+
+struct descriptor {
+ struct fw_descriptor d;
+ struct client_resource resource;
+ u32 data[0];
+};
+
+static void release_descriptor(struct client *client,
+ struct client_resource *resource)
+{
+ struct descriptor *descriptor =
+ container_of(resource, struct descriptor, resource);
+
+ fw_core_remove_descriptor(&descriptor->d);
+ kfree(descriptor);
+}
+
+static int ioctl_add_descriptor(struct client *client, void *buffer)
+{
+ struct fw_cdev_add_descriptor *request = buffer;
+ struct descriptor *descriptor;
+ int retval;
+
+ if (request->length > 256)
+ return -EINVAL;
+
+ descriptor =
+ kmalloc(sizeof(*descriptor) + request->length * 4, GFP_KERNEL);
+ if (descriptor == NULL)
+ return -ENOMEM;
+
+ if (copy_from_user(descriptor->data,
+ u64_to_uptr(request->data), request->length * 4)) {
+ kfree(descriptor);
+ return -EFAULT;
+ }
+
+ descriptor->d.length = request->length;
+ descriptor->d.immediate = request->immediate;
+ descriptor->d.key = request->key;
+ descriptor->d.data = descriptor->data;
+
+ retval = fw_core_add_descriptor(&descriptor->d);
+ if (retval < 0) {
+ kfree(descriptor);
+ return retval;
+ }
+
+ descriptor->resource.release = release_descriptor;
+ add_client_resource(client, &descriptor->resource);
+ request->handle = descriptor->resource.handle;
+
+ return 0;
+}
+
+static int ioctl_remove_descriptor(struct client *client, void *buffer)
+{
+ struct fw_cdev_remove_descriptor *request = buffer;
+
+ return release_client_resource(client, request->handle, NULL);
+}
+
+static void
+iso_callback(struct fw_iso_context *context, u32 cycle,
+ size_t header_length, void *header, void *data)
+{
+ struct client *client = data;
+ struct iso_interrupt *interrupt;
+
+ interrupt = kzalloc(sizeof(*interrupt) + header_length, GFP_ATOMIC);
+ if (interrupt == NULL)
+ return;
+
+ interrupt->interrupt.type = FW_CDEV_EVENT_ISO_INTERRUPT;
+ interrupt->interrupt.closure = client->iso_closure;
+ interrupt->interrupt.cycle = cycle;
+ interrupt->interrupt.header_length = header_length;
+ memcpy(interrupt->interrupt.header, header, header_length);
+ queue_event(client, &interrupt->event,
+ &interrupt->interrupt,
+ sizeof(interrupt->interrupt) + header_length, NULL, 0);
+}
+
+static int ioctl_create_iso_context(struct client *client, void *buffer)
+{
+ struct fw_cdev_create_iso_context *request = buffer;
+
+ if (request->channel > 63)
+ return -EINVAL;
+
+ switch (request->type) {
+ case FW_ISO_CONTEXT_RECEIVE:
+ if (request->header_size < 4 || (request->header_size & 3))
+ return -EINVAL;
+
+ break;
+
+ case FW_ISO_CONTEXT_TRANSMIT:
+ if (request->speed > SCODE_3200)
+ return -EINVAL;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ client->iso_closure = request->closure;
+ client->iso_context = fw_iso_context_create(client->device->card,
+ request->type,
+ request->channel,
+ request->speed,
+ request->header_size,
+ iso_callback, client);
+ if (IS_ERR(client->iso_context))
+ return PTR_ERR(client->iso_context);
+
+ /* We only support one context at this time. */
+ request->handle = 0;
+
+ return 0;
+}
+
+static int ioctl_queue_iso(struct client *client, void *buffer)
+{
+ struct fw_cdev_queue_iso *request = buffer;
+ struct fw_cdev_iso_packet __user *p, *end, *next;
+ struct fw_iso_context *ctx = client->iso_context;
+ unsigned long payload, buffer_end, header_length;
+ int count;
+ struct {
+ struct fw_iso_packet packet;
+ u8 header[256];
+ } u;
+
+ if (ctx == NULL || request->handle != 0)
+ return -EINVAL;
+
+ /*
+ * If the user passes a non-NULL data pointer, has mmap()'ed
+ * the iso buffer, and the pointer points inside the buffer,
+ * we setup the payload pointers accordingly. Otherwise we
+ * set them both to 0, which will still let packets with
+ * payload_length == 0 through. In other words, if no packets
+ * use the indirect payload, the iso buffer need not be mapped
+ * and the request->data pointer is ignored.
+ */
+
+ payload = (unsigned long)request->data - client->vm_start;
+ buffer_end = client->buffer.page_count << PAGE_SHIFT;
+ if (request->data == 0 || client->buffer.pages == NULL ||
+ payload >= buffer_end) {
+ payload = 0;
+ buffer_end = 0;
+ }
+
+ if (!access_ok(VERIFY_READ, request->packets, request->size))
+ return -EFAULT;
+
+ p = (struct fw_cdev_iso_packet __user *)u64_to_uptr(request->packets);
+ end = (void __user *)p + request->size;
+ count = 0;
+ while (p < end) {
+ if (__copy_from_user(&u.packet, p, sizeof(*p)))
+ return -EFAULT;
+
+ if (ctx->type == FW_ISO_CONTEXT_TRANSMIT) {
+ header_length = u.packet.header_length;
+ } else {
+ /*
+ * We require that header_length is a multiple of
+ * the fixed header size, ctx->header_size.
+ */
+ if (ctx->header_size == 0) {
+ if (u.packet.header_length > 0)
+ return -EINVAL;
+ } else if (u.packet.header_length % ctx->header_size != 0) {
+ return -EINVAL;
+ }
+ header_length = 0;
+ }
+
+ next = (struct fw_cdev_iso_packet __user *)
+ &p->header[header_length / 4];
+ if (next > end)
+ return -EINVAL;
+ if (__copy_from_user
+ (u.packet.header, p->header, header_length))
+ return -EFAULT;
+ if (u.packet.skip && ctx->type == FW_ISO_CONTEXT_TRANSMIT &&
+ u.packet.header_length + u.packet.payload_length > 0)
+ return -EINVAL;
+ if (payload + u.packet.payload_length > buffer_end)
+ return -EINVAL;
+
+ if (fw_iso_context_queue(ctx, &u.packet,
+ &client->buffer, payload))
+ break;
+
+ p = next;
+ payload += u.packet.payload_length;
+ count++;
+ }
+
+ request->size -= uptr_to_u64(p) - request->packets;
+ request->packets = uptr_to_u64(p);
+ request->data = client->vm_start + payload;
+
+ return count;
+}
+
+static int ioctl_start_iso(struct client *client, void *buffer)
+{
+ struct fw_cdev_start_iso *request = buffer;
+
+ if (request->handle != 0)
+ return -EINVAL;
+ if (client->iso_context->type == FW_ISO_CONTEXT_RECEIVE) {
+ if (request->tags == 0 || request->tags > 15)
+ return -EINVAL;
+
+ if (request->sync > 15)
+ return -EINVAL;
+ }
+
+ return fw_iso_context_start(client->iso_context, request->cycle,
+ request->sync, request->tags);
+}
+
+static int ioctl_stop_iso(struct client *client, void *buffer)
+{
+ struct fw_cdev_stop_iso *request = buffer;
+
+ if (request->handle != 0)
+ return -EINVAL;
+
+ return fw_iso_context_stop(client->iso_context);
+}
+
+static int (* const ioctl_handlers[])(struct client *client, void *buffer) = {
+ ioctl_get_info,
+ ioctl_send_request,
+ ioctl_allocate,
+ ioctl_deallocate,
+ ioctl_send_response,
+ ioctl_initiate_bus_reset,
+ ioctl_add_descriptor,
+ ioctl_remove_descriptor,
+ ioctl_create_iso_context,
+ ioctl_queue_iso,
+ ioctl_start_iso,
+ ioctl_stop_iso,
+};
+
+static int
+dispatch_ioctl(struct client *client, unsigned int cmd, void __user *arg)
+{
+ char buffer[256];
+ int retval;
+
+ if (_IOC_TYPE(cmd) != '#' ||
+ _IOC_NR(cmd) >= ARRAY_SIZE(ioctl_handlers))
+ return -EINVAL;
+
+ if (_IOC_DIR(cmd) & _IOC_WRITE) {
+ if (_IOC_SIZE(cmd) > sizeof(buffer) ||
+ copy_from_user(buffer, arg, _IOC_SIZE(cmd)))
+ return -EFAULT;
+ }
+
+ retval = ioctl_handlers[_IOC_NR(cmd)](client, buffer);
+ if (retval < 0)
+ return retval;
+
+ if (_IOC_DIR(cmd) & _IOC_READ) {
+ if (_IOC_SIZE(cmd) > sizeof(buffer) ||
+ copy_to_user(arg, buffer, _IOC_SIZE(cmd)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static long
+fw_device_op_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct client *client = file->private_data;
+
+ return dispatch_ioctl(client, cmd, (void __user *) arg);
+}
+
+#ifdef CONFIG_COMPAT
+static long
+fw_device_op_compat_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct client *client = file->private_data;
+
+ return dispatch_ioctl(client, cmd, compat_ptr(arg));
+}
+#endif
+
+static int fw_device_op_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct client *client = file->private_data;
+ enum dma_data_direction direction;
+ unsigned long size;
+ int page_count, retval;
+
+ /* FIXME: We could support multiple buffers, but we don't. */
+ if (client->buffer.pages != NULL)
+ return -EBUSY;
+
+ if (!(vma->vm_flags & VM_SHARED))
+ return -EINVAL;
+
+ if (vma->vm_start & ~PAGE_MASK)
+ return -EINVAL;
+
+ client->vm_start = vma->vm_start;
+ size = vma->vm_end - vma->vm_start;
+ page_count = size >> PAGE_SHIFT;
+ if (size & ~PAGE_MASK)
+ return -EINVAL;
+
+ if (vma->vm_flags & VM_WRITE)
+ direction = DMA_TO_DEVICE;
+ else
+ direction = DMA_FROM_DEVICE;
+
+ retval = fw_iso_buffer_init(&client->buffer, client->device->card,
+ page_count, direction);
+ if (retval < 0)
+ return retval;
+
+ retval = fw_iso_buffer_map(&client->buffer, vma);
+ if (retval < 0)
+ fw_iso_buffer_destroy(&client->buffer, client->device->card);
+
+ return retval;
+}
+
+static int fw_device_op_release(struct inode *inode, struct file *file)
+{
+ struct client *client = file->private_data;
+ struct event *e, *next_e;
+ struct client_resource *r, *next_r;
+ unsigned long flags;
+
+ if (client->buffer.pages)
+ fw_iso_buffer_destroy(&client->buffer, client->device->card);
+
+ if (client->iso_context)
+ fw_iso_context_destroy(client->iso_context);
+
+ list_for_each_entry_safe(r, next_r, &client->resource_list, link)
+ r->release(client, r);
+
+ /*
+ * FIXME: We should wait for the async tasklets to stop
+ * running before freeing the memory.
+ */
+
+ list_for_each_entry_safe(e, next_e, &client->event_list, link)
+ kfree(e);
+
+ spin_lock_irqsave(&client->device->card->lock, flags);
+ list_del(&client->link);
+ spin_unlock_irqrestore(&client->device->card->lock, flags);
+
+ fw_device_put(client->device);
+ kfree(client);
+
+ return 0;
+}
+
+static unsigned int fw_device_op_poll(struct file *file, poll_table * pt)
+{
+ struct client *client = file->private_data;
+ unsigned int mask = 0;
+
+ poll_wait(file, &client->wait, pt);
+
+ if (fw_device_is_shutdown(client->device))
+ mask |= POLLHUP | POLLERR;
+ if (!list_empty(&client->event_list))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+const struct file_operations fw_device_ops = {
+ .owner = THIS_MODULE,
+ .open = fw_device_op_open,
+ .read = fw_device_op_read,
+ .unlocked_ioctl = fw_device_op_ioctl,
+ .poll = fw_device_op_poll,
+ .release = fw_device_op_release,
+ .mmap = fw_device_op_mmap,
+
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = fw_device_op_compat_ioctl,
+#endif
+};
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
new file mode 100644
index 0000000..c1ce465
--- /dev/null
+++ b/drivers/firewire/fw-device.c
@@ -0,0 +1,813 @@
+/*
+ * Device probing and sysfs code.
+ *
+ * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/errno.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/rwsem.h>
+#include <asm/semaphore.h>
+#include <linux/ctype.h>
+#include "fw-transaction.h"
+#include "fw-topology.h"
+#include "fw-device.h"
+
+void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p)
+{
+ ci->p = p + 1;
+ ci->end = ci->p + (p[0] >> 16);
+}
+EXPORT_SYMBOL(fw_csr_iterator_init);
+
+int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value)
+{
+ *key = *ci->p >> 24;
+ *value = *ci->p & 0xffffff;
+
+ return ci->p++ < ci->end;
+}
+EXPORT_SYMBOL(fw_csr_iterator_next);
+
+static int is_fw_unit(struct device *dev);
+
+static int match_unit_directory(u32 * directory, const struct fw_device_id *id)
+{
+ struct fw_csr_iterator ci;
+ int key, value, match;
+
+ match = 0;
+ fw_csr_iterator_init(&ci, directory);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ if (key == CSR_VENDOR && value == id->vendor)
+ match |= FW_MATCH_VENDOR;
+ if (key == CSR_MODEL && value == id->model)
+ match |= FW_MATCH_MODEL;
+ if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
+ match |= FW_MATCH_SPECIFIER_ID;
+ if (key == CSR_VERSION && value == id->version)
+ match |= FW_MATCH_VERSION;
+ }
+
+ return (match & id->match_flags) == id->match_flags;
+}
+
+static int fw_unit_match(struct device *dev, struct device_driver *drv)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct fw_driver *driver = fw_driver(drv);
+ int i;
+
+ /* We only allow binding to fw_units. */
+ if (!is_fw_unit(dev))
+ return 0;
+
+ for (i = 0; driver->id_table[i].match_flags != 0; i++) {
+ if (match_unit_directory(unit->directory, &driver->id_table[i]))
+ return 1;
+ }
+
+ return 0;
+}
+
+static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
+{
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct fw_csr_iterator ci;
+
+ int key, value;
+ int vendor = 0;
+ int model = 0;
+ int specifier_id = 0;
+ int version = 0;
+
+ fw_csr_iterator_init(&ci, &device->config_rom[5]);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ switch (key) {
+ case CSR_VENDOR:
+ vendor = value;
+ break;
+ case CSR_MODEL:
+ model = value;
+ break;
+ }
+ }
+
+ fw_csr_iterator_init(&ci, unit->directory);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ switch (key) {
+ case CSR_SPECIFIER_ID:
+ specifier_id = value;
+ break;
+ case CSR_VERSION:
+ version = value;
+ break;
+ }
+ }
+
+ return snprintf(buffer, buffer_size,
+ "ieee1394:ven%08Xmo%08Xsp%08Xver%08X",
+ vendor, model, specifier_id, version);
+}
+
+static int
+fw_unit_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ char modalias[64];
+ int length = 0;
+ int i = 0;
+
+ get_modalias(unit, modalias, sizeof(modalias));
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=%s", modalias))
+ return -ENOMEM;
+
+ envp[i] = NULL;
+
+ return 0;
+}
+
+struct bus_type fw_bus_type = {
+ .name = "firewire",
+ .match = fw_unit_match,
+};
+EXPORT_SYMBOL(fw_bus_type);
+
+struct fw_device *fw_device_get(struct fw_device *device)
+{
+ get_device(&device->device);
+
+ return device;
+}
+
+void fw_device_put(struct fw_device *device)
+{
+ put_device(&device->device);
+}
+
+static void fw_device_release(struct device *dev)
+{
+ struct fw_device *device = fw_device(dev);
+ unsigned long flags;
+
+ /*
+ * Take the card lock so we don't set this to NULL while a
+ * FW_NODE_UPDATED callback is being handled.
+ */
+ spin_lock_irqsave(&device->card->lock, flags);
+ device->node->data = NULL;
+ spin_unlock_irqrestore(&device->card->lock, flags);
+
+ fw_node_put(device->node);
+ fw_card_put(device->card);
+ kfree(device->config_rom);
+ kfree(device);
+}
+
+int fw_device_enable_phys_dma(struct fw_device *device)
+{
+ return device->card->driver->enable_phys_dma(device->card,
+ device->node_id,
+ device->generation);
+}
+EXPORT_SYMBOL(fw_device_enable_phys_dma);
+
+struct config_rom_attribute {
+ struct device_attribute attr;
+ u32 key;
+};
+
+static ssize_t
+show_immediate(struct device *dev, struct device_attribute *dattr, char *buf)
+{
+ struct config_rom_attribute *attr =
+ container_of(dattr, struct config_rom_attribute, attr);
+ struct fw_csr_iterator ci;
+ u32 *dir;
+ int key, value;
+
+ if (is_fw_unit(dev))
+ dir = fw_unit(dev)->directory;
+ else
+ dir = fw_device(dev)->config_rom + 5;
+
+ fw_csr_iterator_init(&ci, dir);
+ while (fw_csr_iterator_next(&ci, &key, &value))
+ if (attr->key == key)
+ return snprintf(buf, buf ? PAGE_SIZE : 0,
+ "0x%06x\n", value);
+
+ return -ENOENT;
+}
+
+#define IMMEDIATE_ATTR(name, key) \
+ { __ATTR(name, S_IRUGO, show_immediate, NULL), key }
+
+static ssize_t
+show_text_leaf(struct device *dev, struct device_attribute *dattr, char *buf)
+{
+ struct config_rom_attribute *attr =
+ container_of(dattr, struct config_rom_attribute, attr);
+ struct fw_csr_iterator ci;
+ u32 *dir, *block = NULL, *p, *end;
+ int length, key, value, last_key = 0;
+ char *b;
+
+ if (is_fw_unit(dev))
+ dir = fw_unit(dev)->directory;
+ else
+ dir = fw_device(dev)->config_rom + 5;
+
+ fw_csr_iterator_init(&ci, dir);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ if (attr->key == last_key &&
+ key == (CSR_DESCRIPTOR | CSR_LEAF))
+ block = ci.p - 1 + value;
+ last_key = key;
+ }
+
+ if (block == NULL)
+ return -ENOENT;
+
+ length = min(block[0] >> 16, 256U);
+ if (length < 3)
+ return -ENOENT;
+
+ if (block[1] != 0 || block[2] != 0)
+ /* Unknown encoding. */
+ return -ENOENT;
+
+ if (buf == NULL)
+ return length * 4;
+
+ b = buf;
+ end = &block[length + 1];
+ for (p = &block[3]; p < end; p++, b += 4)
+ * (u32 *) b = (__force u32) __cpu_to_be32(*p);
+
+ /* Strip trailing whitespace and add newline. */
+ while (b--, (isspace(*b) || *b == '\0') && b > buf);
+ strcpy(b + 1, "\n");
+
+ return b + 2 - buf;
+}
+
+#define TEXT_LEAF_ATTR(name, key) \
+ { __ATTR(name, S_IRUGO, show_text_leaf, NULL), key }
+
+static struct config_rom_attribute config_rom_attributes[] = {
+ IMMEDIATE_ATTR(vendor, CSR_VENDOR),
+ IMMEDIATE_ATTR(hardware_version, CSR_HARDWARE_VERSION),
+ IMMEDIATE_ATTR(specifier_id, CSR_SPECIFIER_ID),
+ IMMEDIATE_ATTR(version, CSR_VERSION),
+ IMMEDIATE_ATTR(model, CSR_MODEL),
+ TEXT_LEAF_ATTR(vendor_name, CSR_VENDOR),
+ TEXT_LEAF_ATTR(model_name, CSR_MODEL),
+ TEXT_LEAF_ATTR(hardware_version_name, CSR_HARDWARE_VERSION),
+};
+
+static void
+init_fw_attribute_group(struct device *dev,
+ struct device_attribute *attrs,
+ struct fw_attribute_group *group)
+{
+ struct device_attribute *attr;
+ int i, j;
+
+ for (j = 0; attrs[j].attr.name != NULL; j++)
+ group->attrs[j] = &attrs[j].attr;
+
+ for (i = 0; i < ARRAY_SIZE(config_rom_attributes); i++) {
+ attr = &config_rom_attributes[i].attr;
+ if (attr->show(dev, attr, NULL) < 0)
+ continue;
+ group->attrs[j++] = &attr->attr;
+ }
+
+ BUG_ON(j >= ARRAY_SIZE(group->attrs));
+ group->attrs[j++] = NULL;
+ group->groups[0] = &group->group;
+ group->groups[1] = NULL;
+ group->group.attrs = group->attrs;
+ dev->groups = group->groups;
+}
+
+static ssize_t
+modalias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ int length;
+
+ length = get_modalias(unit, buf, PAGE_SIZE);
+ strcpy(buf + length, "\n");
+
+ return length + 1;
+}
+
+static ssize_t
+rom_index_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fw_device *device = fw_device(dev->parent);
+ struct fw_unit *unit = fw_unit(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ (int)(unit->directory - device->config_rom));
+}
+
+static struct device_attribute fw_unit_attributes[] = {
+ __ATTR_RO(modalias),
+ __ATTR_RO(rom_index),
+ __ATTR_NULL,
+};
+
+static ssize_t
+config_rom_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct fw_device *device = fw_device(dev);
+
+ memcpy(buf, device->config_rom, device->config_rom_length * 4);
+
+ return device->config_rom_length * 4;
+}
+
+static ssize_t
+guid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct fw_device *device = fw_device(dev);
+ u64 guid;
+
+ guid = ((u64)device->config_rom[3] << 32) | device->config_rom[4];
+
+ return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+ (unsigned long long)guid);
+}
+
+static struct device_attribute fw_device_attributes[] = {
+ __ATTR_RO(config_rom),
+ __ATTR_RO(guid),
+ __ATTR_NULL,
+};
+
+struct read_quadlet_callback_data {
+ struct completion done;
+ int rcode;
+ u32 data;
+};
+
+static void
+complete_transaction(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
+{
+ struct read_quadlet_callback_data *callback_data = data;
+
+ if (rcode == RCODE_COMPLETE)
+ callback_data->data = be32_to_cpu(*(__be32 *)payload);
+ callback_data->rcode = rcode;
+ complete(&callback_data->done);
+}
+
+static int read_rom(struct fw_device *device, int index, u32 * data)
+{
+ struct read_quadlet_callback_data callback_data;
+ struct fw_transaction t;
+ u64 offset;
+
+ init_completion(&callback_data.done);
+
+ offset = 0xfffff0000400ULL + index * 4;
+ fw_send_request(device->card, &t, TCODE_READ_QUADLET_REQUEST,
+ device->node_id,
+ device->generation, SCODE_100,
+ offset, NULL, 4, complete_transaction, &callback_data);
+
+ wait_for_completion(&callback_data.done);
+
+ *data = callback_data.data;
+
+ return callback_data.rcode;
+}
+
+static int read_bus_info_block(struct fw_device *device)
+{
+ static u32 rom[256];
+ u32 stack[16], sp, key;
+ int i, end, length;
+
+ /* First read the bus info block. */
+ for (i = 0; i < 5; i++) {
+ if (read_rom(device, i, &rom[i]) != RCODE_COMPLETE)
+ return -1;
+ /*
+ * As per IEEE1212 7.2, during power-up, devices can
+ * reply with a 0 for the first quadlet of the config
+ * rom to indicate that they are booting (for example,
+ * if the firmware is on the disk of a external
+ * harddisk). In that case we just fail, and the
+ * retry mechanism will try again later.
+ */
+ if (i == 0 && rom[i] == 0)
+ return -1;
+ }
+
+ /*
+ * Now parse the config rom. The config rom is a recursive
+ * directory structure so we parse it using a stack of
+ * references to the blocks that make up the structure. We
+ * push a reference to the root directory on the stack to
+ * start things off.
+ */
+ length = i;
+ sp = 0;
+ stack[sp++] = 0xc0000005;
+ while (sp > 0) {
+ /*
+ * Pop the next block reference of the stack. The
+ * lower 24 bits is the offset into the config rom,
+ * the upper 8 bits are the type of the reference the
+ * block.
+ */
+ key = stack[--sp];
+ i = key & 0xffffff;
+ if (i >= ARRAY_SIZE(rom))
+ /*
+ * The reference points outside the standard
+ * config rom area, something's fishy.
+ */
+ return -1;
+
+ /* Read header quadlet for the block to get the length. */
+ if (read_rom(device, i, &rom[i]) != RCODE_COMPLETE)
+ return -1;
+ end = i + (rom[i] >> 16) + 1;
+ i++;
+ if (end > ARRAY_SIZE(rom))
+ /*
+ * This block extends outside standard config
+ * area (and the array we're reading it
+ * into). That's broken, so ignore this
+ * device.
+ */
+ return -1;
+
+ /*
+ * Now read in the block. If this is a directory
+ * block, check the entries as we read them to see if
+ * it references another block, and push it in that case.
+ */
+ while (i < end) {
+ if (read_rom(device, i, &rom[i]) != RCODE_COMPLETE)
+ return -1;
+ if ((key >> 30) == 3 && (rom[i] >> 30) > 1 &&
+ sp < ARRAY_SIZE(stack))
+ stack[sp++] = i + rom[i];
+ i++;
+ }
+ if (length < i)
+ length = i;
+ }
+
+ device->config_rom = kmalloc(length * 4, GFP_KERNEL);
+ if (device->config_rom == NULL)
+ return -1;
+ memcpy(device->config_rom, rom, length * 4);
+ device->config_rom_length = length;
+
+ return 0;
+}
+
+static void fw_unit_release(struct device *dev)
+{
+ struct fw_unit *unit = fw_unit(dev);
+
+ kfree(unit);
+}
+
+static struct device_type fw_unit_type = {
+ .uevent = fw_unit_uevent,
+ .release = fw_unit_release,
+};
+
+static int is_fw_unit(struct device *dev)
+{
+ return dev->type == &fw_unit_type;
+}
+
+static void create_units(struct fw_device *device)
+{
+ struct fw_csr_iterator ci;
+ struct fw_unit *unit;
+ int key, value, i;
+
+ i = 0;
+ fw_csr_iterator_init(&ci, &device->config_rom[5]);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ if (key != (CSR_UNIT | CSR_DIRECTORY))
+ continue;
+
+ /*
+ * Get the address of the unit directory and try to
+ * match the drivers id_tables against it.
+ */
+ unit = kzalloc(sizeof(*unit), GFP_KERNEL);
+ if (unit == NULL) {
+ fw_error("failed to allocate memory for unit\n");
+ continue;
+ }
+
+ unit->directory = ci.p + value - 1;
+ unit->device.bus = &fw_bus_type;
+ unit->device.type = &fw_unit_type;
+ unit->device.parent = &device->device;
+ snprintf(unit->device.bus_id, sizeof(unit->device.bus_id),
+ "%s.%d", device->device.bus_id, i++);
+
+ init_fw_attribute_group(&unit->device,
+ fw_unit_attributes,
+ &unit->attribute_group);
+ if (device_register(&unit->device) < 0)
+ goto skip_unit;
+
+ continue;
+
+ skip_unit:
+ kfree(unit);
+ }
+}
+
+static int shutdown_unit(struct device *device, void *data)
+{
+ device_unregister(device);
+
+ return 0;
+}
+
+static DECLARE_RWSEM(idr_rwsem);
+static DEFINE_IDR(fw_device_idr);
+int fw_cdev_major;
+
+struct fw_device *fw_device_from_devt(dev_t devt)
+{
+ struct fw_device *device;
+
+ down_read(&idr_rwsem);
+ device = idr_find(&fw_device_idr, MINOR(devt));
+ up_read(&idr_rwsem);
+
+ return device;
+}
+
+static void fw_device_shutdown(struct work_struct *work)
+{
+ struct fw_device *device =
+ container_of(work, struct fw_device, work.work);
+ int minor = MINOR(device->device.devt);
+
+ down_write(&idr_rwsem);
+ idr_remove(&fw_device_idr, minor);
+ up_write(&idr_rwsem);
+
+ fw_device_cdev_remove(device);
+ device_for_each_child(&device->device, NULL, shutdown_unit);
+ device_unregister(&device->device);
+}
+
+static struct device_type fw_device_type = {
+ .release = fw_device_release,
+};
+
+/*
+ * These defines control the retry behavior for reading the config
+ * rom. It shouldn't be necessary to tweak these; if the device
+ * doesn't respond to a config rom read within 10 seconds, it's not
+ * going to respond at all. As for the initial delay, a lot of
+ * devices will be able to respond within half a second after bus
+ * reset. On the other hand, it's not really worth being more
+ * aggressive than that, since it scales pretty well; if 10 devices
+ * are plugged in, they're all getting read within one second.
+ */
+
+#define MAX_RETRIES 10
+#define RETRY_DELAY (3 * HZ)
+#define INITIAL_DELAY (HZ / 2)
+
+static void fw_device_init(struct work_struct *work)
+{
+ struct fw_device *device =
+ container_of(work, struct fw_device, work.work);
+ int minor, err;
+
+ /*
+ * All failure paths here set node->data to NULL, so that we
+ * don't try to do device_for_each_child() on a kfree()'d
+ * device.
+ */
+
+ if (read_bus_info_block(device) < 0) {
+ if (device->config_rom_retries < MAX_RETRIES) {
+ device->config_rom_retries++;
+ schedule_delayed_work(&device->work, RETRY_DELAY);
+ } else {
+ fw_notify("giving up on config rom for node id %x\n",
+ device->node_id);
+ if (device->node == device->card->root_node)
+ schedule_delayed_work(&device->card->work, 0);
+ fw_device_release(&device->device);
+ }
+ return;
+ }
+
+ err = -ENOMEM;
+ down_write(&idr_rwsem);
+ if (idr_pre_get(&fw_device_idr, GFP_KERNEL))
+ err = idr_get_new(&fw_device_idr, device, &minor);
+ up_write(&idr_rwsem);
+ if (err < 0)
+ goto error;
+
+ device->device.bus = &fw_bus_type;
+ device->device.type = &fw_device_type;
+ device->device.parent = device->card->device;
+ device->device.devt = MKDEV(fw_cdev_major, minor);
+ snprintf(device->device.bus_id, sizeof(device->device.bus_id),
+ "fw%d", minor);
+
+ init_fw_attribute_group(&device->device,
+ fw_device_attributes,
+ &device->attribute_group);
+ if (device_add(&device->device)) {
+ fw_error("Failed to add device.\n");
+ goto error_with_cdev;
+ }
+
+ create_units(device);
+
+ /*
+ * Transition the device to running state. If it got pulled
+ * out from under us while we did the intialization work, we
+ * have to shut down the device again here. Normally, though,
+ * fw_node_event will be responsible for shutting it down when
+ * necessary. We have to use the atomic cmpxchg here to avoid
+ * racing with the FW_NODE_DESTROYED case in
+ * fw_node_event().
+ */
+ if (atomic_cmpxchg(&device->state,
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
+ fw_device_shutdown(&device->work.work);
+ else
+ fw_notify("created new fw device %s (%d config rom retries)\n",
+ device->device.bus_id, device->config_rom_retries);
+
+ /*
+ * Reschedule the IRM work if we just finished reading the
+ * root node config rom. If this races with a bus reset we
+ * just end up running the IRM work a couple of extra times -
+ * pretty harmless.
+ */
+ if (device->node == device->card->root_node)
+ schedule_delayed_work(&device->card->work, 0);
+
+ return;
+
+ error_with_cdev:
+ down_write(&idr_rwsem);
+ idr_remove(&fw_device_idr, minor);
+ up_write(&idr_rwsem);
+ error:
+ put_device(&device->device);
+}
+
+static int update_unit(struct device *dev, void *data)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct fw_driver *driver = (struct fw_driver *)dev->driver;
+
+ if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
+ down(&dev->sem);
+ driver->update(unit);
+ up(&dev->sem);
+ }
+
+ return 0;
+}
+
+static void fw_device_update(struct work_struct *work)
+{
+ struct fw_device *device =
+ container_of(work, struct fw_device, work.work);
+
+ fw_device_cdev_update(device);
+ device_for_each_child(&device->device, NULL, update_unit);
+}
+
+void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
+{
+ struct fw_device *device;
+
+ switch (event) {
+ case FW_NODE_CREATED:
+ case FW_NODE_LINK_ON:
+ if (!node->link_on)
+ break;
+
+ device = kzalloc(sizeof(*device), GFP_ATOMIC);
+ if (device == NULL)
+ break;
+
+ /*
+ * Do minimal intialization of the device here, the
+ * rest will happen in fw_device_init(). We need the
+ * card and node so we can read the config rom and we
+ * need to do device_initialize() now so
+ * device_for_each_child() in FW_NODE_UPDATED is
+ * doesn't freak out.
+ */
+ device_initialize(&device->device);
+ atomic_set(&device->state, FW_DEVICE_INITIALIZING);
+ device->card = fw_card_get(card);
+ device->node = fw_node_get(node);
+ device->node_id = node->node_id;
+ device->generation = card->generation;
+ INIT_LIST_HEAD(&device->client_list);
+
+ /*
+ * Set the node data to point back to this device so
+ * FW_NODE_UPDATED callbacks can update the node_id
+ * and generation for the device.
+ */
+ node->data = device;
+
+ /*
+ * Many devices are slow to respond after bus resets,
+ * especially if they are bus powered and go through
+ * power-up after getting plugged in. We schedule the
+ * first config rom scan half a second after bus reset.
+ */
+ INIT_DELAYED_WORK(&device->work, fw_device_init);
+ schedule_delayed_work(&device->work, INITIAL_DELAY);
+ break;
+
+ case FW_NODE_UPDATED:
+ if (!node->link_on || node->data == NULL)
+ break;
+
+ device = node->data;
+ device->node_id = node->node_id;
+ device->generation = card->generation;
+ if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
+ PREPARE_DELAYED_WORK(&device->work, fw_device_update);
+ schedule_delayed_work(&device->work, 0);
+ }
+ break;
+
+ case FW_NODE_DESTROYED:
+ case FW_NODE_LINK_OFF:
+ if (!node->data)
+ break;
+
+ /*
+ * Destroy the device associated with the node. There
+ * are two cases here: either the device is fully
+ * initialized (FW_DEVICE_RUNNING) or we're in the
+ * process of reading its config rom
+ * (FW_DEVICE_INITIALIZING). If it is fully
+ * initialized we can reuse device->work to schedule a
+ * full fw_device_shutdown(). If not, there's work
+ * scheduled to read it's config rom, and we just put
+ * the device in shutdown state to have that code fail
+ * to create the device.
+ */
+ device = node->data;
+ if (atomic_xchg(&device->state,
+ FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
+ PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
+ schedule_delayed_work(&device->work, 0);
+ }
+ break;
+ }
+}
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
new file mode 100644
index 0000000..0ba9d64
--- /dev/null
+++ b/drivers/firewire/fw-device.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __fw_device_h
+#define __fw_device_h
+
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <asm/atomic.h>
+
+enum fw_device_state {
+ FW_DEVICE_INITIALIZING,
+ FW_DEVICE_RUNNING,
+ FW_DEVICE_SHUTDOWN,
+};
+
+struct fw_attribute_group {
+ struct attribute_group *groups[2];
+ struct attribute_group group;
+ struct attribute *attrs[11];
+};
+
+struct fw_device {
+ atomic_t state;
+ struct fw_node *node;
+ int node_id;
+ int generation;
+ struct fw_card *card;
+ struct device device;
+ struct list_head link;
+ struct list_head client_list;
+ u32 *config_rom;
+ size_t config_rom_length;
+ int config_rom_retries;
+ struct delayed_work work;
+ struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_device *
+fw_device(struct device *dev)
+{
+ return container_of(dev, struct fw_device, device);
+}
+
+static inline int
+fw_device_is_shutdown(struct fw_device *device)
+{
+ return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
+}
+
+struct fw_device *fw_device_get(struct fw_device *device);
+void fw_device_put(struct fw_device *device);
+int fw_device_enable_phys_dma(struct fw_device *device);
+
+void fw_device_cdev_update(struct fw_device *device);
+void fw_device_cdev_remove(struct fw_device *device);
+
+struct fw_device *fw_device_from_devt(dev_t devt);
+extern int fw_cdev_major;
+
+struct fw_unit {
+ struct device device;
+ u32 *directory;
+ struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_unit *
+fw_unit(struct device *dev)
+{
+ return container_of(dev, struct fw_unit, device);
+}
+
+#define CSR_OFFSET 0x40
+#define CSR_LEAF 0x80
+#define CSR_DIRECTORY 0xc0
+
+#define CSR_DESCRIPTOR 0x01
+#define CSR_VENDOR 0x03
+#define CSR_HARDWARE_VERSION 0x04
+#define CSR_NODE_CAPABILITIES 0x0c
+#define CSR_UNIT 0x11
+#define CSR_SPECIFIER_ID 0x12
+#define CSR_VERSION 0x13
+#define CSR_DEPENDENT_INFO 0x14
+#define CSR_MODEL 0x17
+#define CSR_INSTANCE 0x18
+
+#define SBP2_COMMAND_SET_SPECIFIER 0x38
+#define SBP2_COMMAND_SET 0x39
+#define SBP2_COMMAND_SET_REVISION 0x3b
+#define SBP2_FIRMWARE_REVISION 0x3c
+
+struct fw_csr_iterator {
+ u32 *p;
+ u32 *end;
+};
+
+void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 *p);
+int fw_csr_iterator_next(struct fw_csr_iterator *ci,
+ int *key, int *value);
+
+#define FW_MATCH_VENDOR 0x0001
+#define FW_MATCH_MODEL 0x0002
+#define FW_MATCH_SPECIFIER_ID 0x0004
+#define FW_MATCH_VERSION 0x0008
+
+struct fw_device_id {
+ u32 match_flags;
+ u32 vendor;
+ u32 model;
+ u32 specifier_id;
+ u32 version;
+ void *driver_data;
+};
+
+struct fw_driver {
+ struct device_driver driver;
+ /* Called when the parent device sits through a bus reset. */
+ void (*update) (struct fw_unit *unit);
+ const struct fw_device_id *id_table;
+};
+
+static inline struct fw_driver *
+fw_driver(struct device_driver *drv)
+{
+ return container_of(drv, struct fw_driver, driver);
+}
+
+extern const struct file_operations fw_device_ops;
+
+#endif /* __fw_device_h */
diff --git a/drivers/firewire/fw-iso.c b/drivers/firewire/fw-iso.c
new file mode 100644
index 0000000..2b640e9
--- /dev/null
+++ b/drivers/firewire/fw-iso.c
@@ -0,0 +1,163 @@
+/*
+ * Isochronous IO functionality
+ *
+ * Copyright (C) 2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+
+#include "fw-transaction.h"
+#include "fw-topology.h"
+#include "fw-device.h"
+
+int
+fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
+ int page_count, enum dma_data_direction direction)
+{
+ int i, j, retval = -ENOMEM;
+ dma_addr_t address;
+
+ buffer->page_count = page_count;
+ buffer->direction = direction;
+
+ buffer->pages = kmalloc(page_count * sizeof(buffer->pages[0]),
+ GFP_KERNEL);
+ if (buffer->pages == NULL)
+ goto out;
+
+ for (i = 0; i < buffer->page_count; i++) {
+ buffer->pages[i] = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
+ if (buffer->pages[i] == NULL)
+ goto out_pages;
+
+ address = dma_map_page(card->device, buffer->pages[i],
+ 0, PAGE_SIZE, direction);
+ if (dma_mapping_error(address)) {
+ __free_page(buffer->pages[i]);
+ goto out_pages;
+ }
+ set_page_private(buffer->pages[i], address);
+ }
+
+ return 0;
+
+ out_pages:
+ for (j = 0; j < i; j++) {
+ address = page_private(buffer->pages[j]);
+ dma_unmap_page(card->device, address,
+ PAGE_SIZE, DMA_TO_DEVICE);
+ __free_page(buffer->pages[j]);
+ }
+ kfree(buffer->pages);
+ out:
+ buffer->pages = NULL;
+ return retval;
+}
+
+int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma)
+{
+ unsigned long uaddr;
+ int i, retval;
+
+ uaddr = vma->vm_start;
+ for (i = 0; i < buffer->page_count; i++) {
+ retval = vm_insert_page(vma, uaddr, buffer->pages[i]);
+ if (retval)
+ return retval;
+ uaddr += PAGE_SIZE;
+ }
+
+ return 0;
+}
+
+void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer,
+ struct fw_card *card)
+{
+ int i;
+ dma_addr_t address;
+
+ for (i = 0; i < buffer->page_count; i++) {
+ address = page_private(buffer->pages[i]);
+ dma_unmap_page(card->device, address,
+ PAGE_SIZE, DMA_TO_DEVICE);
+ __free_page(buffer->pages[i]);
+ }
+
+ kfree(buffer->pages);
+ buffer->pages = NULL;
+}
+
+struct fw_iso_context *
+fw_iso_context_create(struct fw_card *card, int type,
+ int channel, int speed, size_t header_size,
+ fw_iso_callback_t callback, void *callback_data)
+{
+ struct fw_iso_context *ctx;
+
+ ctx = card->driver->allocate_iso_context(card, type, header_size);
+ if (IS_ERR(ctx))
+ return ctx;
+
+ ctx->card = card;
+ ctx->type = type;
+ ctx->channel = channel;
+ ctx->speed = speed;
+ ctx->header_size = header_size;
+ ctx->callback = callback;
+ ctx->callback_data = callback_data;
+
+ return ctx;
+}
+EXPORT_SYMBOL(fw_iso_context_create);
+
+void fw_iso_context_destroy(struct fw_iso_context *ctx)
+{
+ struct fw_card *card = ctx->card;
+
+ card->driver->free_iso_context(ctx);
+}
+EXPORT_SYMBOL(fw_iso_context_destroy);
+
+int
+fw_iso_context_start(struct fw_iso_context *ctx, int cycle, int sync, int tags)
+{
+ return ctx->card->driver->start_iso(ctx, cycle, sync, tags);
+}
+EXPORT_SYMBOL(fw_iso_context_start);
+
+int
+fw_iso_context_queue(struct fw_iso_context *ctx,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload)
+{
+ struct fw_card *card = ctx->card;
+
+ return card->driver->queue_iso(ctx, packet, buffer, payload);
+}
+EXPORT_SYMBOL(fw_iso_context_queue);
+
+int
+fw_iso_context_stop(struct fw_iso_context *ctx)
+{
+ return ctx->card->driver->stop_iso(ctx);
+}
+EXPORT_SYMBOL(fw_iso_context_stop);
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
new file mode 100644
index 0000000..1f5c704
--- /dev/null
+++ b/drivers/firewire/fw-ohci.c
@@ -0,0 +1,1943 @@
+/*
+ * Driver for OHCI 1394 controllers
+ *
+ * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+
+#include "fw-transaction.h"
+#include "fw-ohci.h"
+
+#define DESCRIPTOR_OUTPUT_MORE 0
+#define DESCRIPTOR_OUTPUT_LAST (1 << 12)
+#define DESCRIPTOR_INPUT_MORE (2 << 12)
+#define DESCRIPTOR_INPUT_LAST (3 << 12)
+#define DESCRIPTOR_STATUS (1 << 11)
+#define DESCRIPTOR_KEY_IMMEDIATE (2 << 8)
+#define DESCRIPTOR_PING (1 << 7)
+#define DESCRIPTOR_YY (1 << 6)
+#define DESCRIPTOR_NO_IRQ (0 << 4)
+#define DESCRIPTOR_IRQ_ERROR (1 << 4)
+#define DESCRIPTOR_IRQ_ALWAYS (3 << 4)
+#define DESCRIPTOR_BRANCH_ALWAYS (3 << 2)
+#define DESCRIPTOR_WAIT (3 << 0)
+
+struct descriptor {
+ __le16 req_count;
+ __le16 control;
+ __le32 data_address;
+ __le32 branch_address;
+ __le16 res_count;
+ __le16 transfer_status;
+} __attribute__((aligned(16)));
+
+struct db_descriptor {
+ __le16 first_size;
+ __le16 control;
+ __le16 second_req_count;
+ __le16 first_req_count;
+ __le32 branch_address;
+ __le16 second_res_count;
+ __le16 first_res_count;
+ __le32 reserved0;
+ __le32 first_buffer;
+ __le32 second_buffer;
+ __le32 reserved1;
+} __attribute__((aligned(16)));
+
+#define CONTROL_SET(regs) (regs)
+#define CONTROL_CLEAR(regs) ((regs) + 4)
+#define COMMAND_PTR(regs) ((regs) + 12)
+#define CONTEXT_MATCH(regs) ((regs) + 16)
+
+struct ar_buffer {
+ struct descriptor descriptor;
+ struct ar_buffer *next;
+ __le32 data[0];
+};
+
+struct ar_context {
+ struct fw_ohci *ohci;
+ struct ar_buffer *current_buffer;
+ struct ar_buffer *last_buffer;
+ void *pointer;
+ u32 regs;
+ struct tasklet_struct tasklet;
+};
+
+struct context;
+
+typedef int (*descriptor_callback_t)(struct context *ctx,
+ struct descriptor *d,
+ struct descriptor *last);
+struct context {
+ struct fw_ohci *ohci;
+ u32 regs;
+
+ struct descriptor *buffer;
+ dma_addr_t buffer_bus;
+ size_t buffer_size;
+ struct descriptor *head_descriptor;
+ struct descriptor *tail_descriptor;
+ struct descriptor *tail_descriptor_last;
+ struct descriptor *prev_descriptor;
+
+ descriptor_callback_t callback;
+
+ struct tasklet_struct tasklet;
+};
+
+#define IT_HEADER_SY(v) ((v) << 0)
+#define IT_HEADER_TCODE(v) ((v) << 4)
+#define IT_HEADER_CHANNEL(v) ((v) << 8)
+#define IT_HEADER_TAG(v) ((v) << 14)
+#define IT_HEADER_SPEED(v) ((v) << 16)
+#define IT_HEADER_DATA_LENGTH(v) ((v) << 16)
+
+struct iso_context {
+ struct fw_iso_context base;
+ struct context context;
+ void *header;
+ size_t header_length;
+};
+
+#define CONFIG_ROM_SIZE 1024
+
+struct fw_ohci {
+ struct fw_card card;
+
+ u32 version;
+ __iomem char *registers;
+ dma_addr_t self_id_bus;
+ __le32 *self_id_cpu;
+ struct tasklet_struct bus_reset_tasklet;
+ int node_id;
+ int generation;
+ int request_generation;
+ u32 bus_seconds;
+
+ /*
+ * Spinlock for accessing fw_ohci data. Never call out of
+ * this driver with this lock held.
+ */
+ spinlock_t lock;
+ u32 self_id_buffer[512];
+
+ /* Config rom buffers */
+ __be32 *config_rom;
+ dma_addr_t config_rom_bus;
+ __be32 *next_config_rom;
+ dma_addr_t next_config_rom_bus;
+ u32 next_header;
+
+ struct ar_context ar_request_ctx;
+ struct ar_context ar_response_ctx;
+ struct context at_request_ctx;
+ struct context at_response_ctx;
+
+ u32 it_context_mask;
+ struct iso_context *it_context_list;
+ u32 ir_context_mask;
+ struct iso_context *ir_context_list;
+};
+
+static inline struct fw_ohci *fw_ohci(struct fw_card *card)
+{
+ return container_of(card, struct fw_ohci, card);
+}
+
+#define IT_CONTEXT_CYCLE_MATCH_ENABLE 0x80000000
+#define IR_CONTEXT_BUFFER_FILL 0x80000000
+#define IR_CONTEXT_ISOCH_HEADER 0x40000000
+#define IR_CONTEXT_CYCLE_MATCH_ENABLE 0x20000000
+#define IR_CONTEXT_MULTI_CHANNEL_MODE 0x10000000
+#define IR_CONTEXT_DUAL_BUFFER_MODE 0x08000000
+
+#define CONTEXT_RUN 0x8000
+#define CONTEXT_WAKE 0x1000
+#define CONTEXT_DEAD 0x0800
+#define CONTEXT_ACTIVE 0x0400
+
+#define OHCI1394_MAX_AT_REQ_RETRIES 0x2
+#define OHCI1394_MAX_AT_RESP_RETRIES 0x2
+#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8
+
+#define FW_OHCI_MAJOR 240
+#define OHCI1394_REGISTER_SIZE 0x800
+#define OHCI_LOOP_COUNT 500
+#define OHCI1394_PCI_HCI_Control 0x40
+#define SELF_ID_BUF_SIZE 0x800
+#define OHCI_TCODE_PHY_PACKET 0x0e
+#define OHCI_VERSION_1_1 0x010010
+#define ISO_BUFFER_SIZE (64 * 1024)
+#define AT_BUFFER_SIZE 4096
+
+static char ohci_driver_name[] = KBUILD_MODNAME;
+
+static inline void reg_write(const struct fw_ohci *ohci, int offset, u32 data)
+{
+ writel(data, ohci->registers + offset);
+}
+
+static inline u32 reg_read(const struct fw_ohci *ohci, int offset)
+{
+ return readl(ohci->registers + offset);
+}
+
+static inline void flush_writes(const struct fw_ohci *ohci)
+{
+ /* Do a dummy read to flush writes. */
+ reg_read(ohci, OHCI1394_Version);
+}
+
+static int
+ohci_update_phy_reg(struct fw_card *card, int addr,
+ int clear_bits, int set_bits)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ u32 val, old;
+
+ reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
+ msleep(2);
+ val = reg_read(ohci, OHCI1394_PhyControl);
+ if ((val & OHCI1394_PhyControl_ReadDone) == 0) {
+ fw_error("failed to set phy reg bits.\n");
+ return -EBUSY;
+ }
+
+ old = OHCI1394_PhyControl_ReadData(val);
+ old = (old & ~clear_bits) | set_bits;
+ reg_write(ohci, OHCI1394_PhyControl,
+ OHCI1394_PhyControl_Write(addr, old));
+
+ return 0;
+}
+
+static int ar_context_add_page(struct ar_context *ctx)
+{
+ struct device *dev = ctx->ohci->card.device;
+ struct ar_buffer *ab;
+ dma_addr_t ab_bus;
+ size_t offset;
+
+ ab = (struct ar_buffer *) __get_free_page(GFP_ATOMIC);
+ if (ab == NULL)
+ return -ENOMEM;
+
+ ab_bus = dma_map_single(dev, ab, PAGE_SIZE, DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(ab_bus)) {
+ free_page((unsigned long) ab);
+ return -ENOMEM;
+ }
+
+ memset(&ab->descriptor, 0, sizeof(ab->descriptor));
+ ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
+ DESCRIPTOR_STATUS |
+ DESCRIPTOR_BRANCH_ALWAYS);
+ offset = offsetof(struct ar_buffer, data);
+ ab->descriptor.req_count = cpu_to_le16(PAGE_SIZE - offset);
+ ab->descriptor.data_address = cpu_to_le32(ab_bus + offset);
+ ab->descriptor.res_count = cpu_to_le16(PAGE_SIZE - offset);
+ ab->descriptor.branch_address = 0;
+
+ dma_sync_single_for_device(dev, ab_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
+
+ ctx->last_buffer->descriptor.branch_address = ab_bus | 1;
+ ctx->last_buffer->next = ab;
+ ctx->last_buffer = ab;
+
+ reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
+ flush_writes(ctx->ohci);
+
+ return 0;
+}
+
+static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
+{
+ struct fw_ohci *ohci = ctx->ohci;
+ struct fw_packet p;
+ u32 status, length, tcode;
+
+ p.header[0] = le32_to_cpu(buffer[0]);
+ p.header[1] = le32_to_cpu(buffer[1]);
+ p.header[2] = le32_to_cpu(buffer[2]);
+
+ tcode = (p.header[0] >> 4) & 0x0f;
+ switch (tcode) {
+ case TCODE_WRITE_QUADLET_REQUEST:
+ case TCODE_READ_QUADLET_RESPONSE:
+ p.header[3] = (__force __u32) buffer[3];
+ p.header_length = 16;
+ p.payload_length = 0;
+ break;
+
+ case TCODE_READ_BLOCK_REQUEST :
+ p.header[3] = le32_to_cpu(buffer[3]);
+ p.header_length = 16;
+ p.payload_length = 0;
+ break;
+
+ case TCODE_WRITE_BLOCK_REQUEST:
+ case TCODE_READ_BLOCK_RESPONSE:
+ case TCODE_LOCK_REQUEST:
+ case TCODE_LOCK_RESPONSE:
+ p.header[3] = le32_to_cpu(buffer[3]);
+ p.header_length = 16;
+ p.payload_length = p.header[3] >> 16;
+ break;
+
+ case TCODE_WRITE_RESPONSE:
+ case TCODE_READ_QUADLET_REQUEST:
+ case OHCI_TCODE_PHY_PACKET:
+ p.header_length = 12;
+ p.payload_length = 0;
+ break;
+ }
+
+ p.payload = (void *) buffer + p.header_length;
+
+ /* FIXME: What to do about evt_* errors? */
+ length = (p.header_length + p.payload_length + 3) / 4;
+ status = le32_to_cpu(buffer[length]);
+
+ p.ack = ((status >> 16) & 0x1f) - 16;
+ p.speed = (status >> 21) & 0x7;
+ p.timestamp = status & 0xffff;
+ p.generation = ohci->request_generation;
+
+ /*
+ * The OHCI bus reset handler synthesizes a phy packet with
+ * the new generation number when a bus reset happens (see
+ * section 8.4.2.3). This helps us determine when a request
+ * was received and make sure we send the response in the same
+ * generation. We only need this for requests; for responses
+ * we use the unique tlabel for finding the matching
+ * request.
+ */
+
+ if (p.ack + 16 == 0x09)
+ ohci->request_generation = (buffer[2] >> 16) & 0xff;
+ else if (ctx == &ohci->ar_request_ctx)
+ fw_core_handle_request(&ohci->card, &p);
+ else
+ fw_core_handle_response(&ohci->card, &p);
+
+ return buffer + length + 1;
+}
+
+static void ar_context_tasklet(unsigned long data)
+{
+ struct ar_context *ctx = (struct ar_context *)data;
+ struct fw_ohci *ohci = ctx->ohci;
+ struct ar_buffer *ab;
+ struct descriptor *d;
+ void *buffer, *end;
+
+ ab = ctx->current_buffer;
+ d = &ab->descriptor;
+
+ if (d->res_count == 0) {
+ size_t size, rest, offset;
+
+ /*
+ * This descriptor is finished and we may have a
+ * packet split across this and the next buffer. We
+ * reuse the page for reassembling the split packet.
+ */
+
+ offset = offsetof(struct ar_buffer, data);
+ dma_unmap_single(ohci->card.device,
+ ab->descriptor.data_address - offset,
+ PAGE_SIZE, DMA_BIDIRECTIONAL);
+
+ buffer = ab;
+ ab = ab->next;
+ d = &ab->descriptor;
+ size = buffer + PAGE_SIZE - ctx->pointer;
+ rest = le16_to_cpu(d->req_count) - le16_to_cpu(d->res_count);
+ memmove(buffer, ctx->pointer, size);
+ memcpy(buffer + size, ab->data, rest);
+ ctx->current_buffer = ab;
+ ctx->pointer = (void *) ab->data + rest;
+ end = buffer + size + rest;
+
+ while (buffer < end)
+ buffer = handle_ar_packet(ctx, buffer);
+
+ free_page((unsigned long)buffer);
+ ar_context_add_page(ctx);
+ } else {
+ buffer = ctx->pointer;
+ ctx->pointer = end =
+ (void *) ab + PAGE_SIZE - le16_to_cpu(d->res_count);
+
+ while (buffer < end)
+ buffer = handle_ar_packet(ctx, buffer);
+ }
+}
+
+static int
+ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 regs)
+{
+ struct ar_buffer ab;
+
+ ctx->regs = regs;
+ ctx->ohci = ohci;
+ ctx->last_buffer = &ab;
+ tasklet_init(&ctx->tasklet, ar_context_tasklet, (unsigned long)ctx);
+
+ ar_context_add_page(ctx);
+ ar_context_add_page(ctx);
+ ctx->current_buffer = ab.next;
+ ctx->pointer = ctx->current_buffer->data;
+
+ reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ab.descriptor.branch_address);
+ reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN);
+ flush_writes(ctx->ohci);
+
+ return 0;
+}
+
+static void context_tasklet(unsigned long data)
+{
+ struct context *ctx = (struct context *) data;
+ struct fw_ohci *ohci = ctx->ohci;
+ struct descriptor *d, *last;
+ u32 address;
+ int z;
+
+ dma_sync_single_for_cpu(ohci->card.device, ctx->buffer_bus,
+ ctx->buffer_size, DMA_TO_DEVICE);
+
+ d = ctx->tail_descriptor;
+ last = ctx->tail_descriptor_last;
+
+ while (last->branch_address != 0) {
+ address = le32_to_cpu(last->branch_address);
+ z = address & 0xf;
+ d = ctx->buffer + (address - ctx->buffer_bus) / sizeof(*d);
+ last = (z == 2) ? d : d + z - 1;
+
+ if (!ctx->callback(ctx, d, last))
+ break;
+
+ ctx->tail_descriptor = d;
+ ctx->tail_descriptor_last = last;
+ }
+}
+
+static int
+context_init(struct context *ctx, struct fw_ohci *ohci,
+ size_t buffer_size, u32 regs,
+ descriptor_callback_t callback)
+{
+ ctx->ohci = ohci;
+ ctx->regs = regs;
+ ctx->buffer_size = buffer_size;
+ ctx->buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (ctx->buffer == NULL)
+ return -ENOMEM;
+
+ tasklet_init(&ctx->tasklet, context_tasklet, (unsigned long)ctx);
+ ctx->callback = callback;
+
+ ctx->buffer_bus =
+ dma_map_single(ohci->card.device, ctx->buffer,
+ buffer_size, DMA_TO_DEVICE);
+ if (dma_mapping_error(ctx->buffer_bus)) {
+ kfree(ctx->buffer);
+ return -ENOMEM;
+ }
+
+ ctx->head_descriptor = ctx->buffer;
+ ctx->prev_descriptor = ctx->buffer;
+ ctx->tail_descriptor = ctx->buffer;
+ ctx->tail_descriptor_last = ctx->buffer;
+
+ /*
+ * We put a dummy descriptor in the buffer that has a NULL
+ * branch address and looks like it's been sent. That way we
+ * have a descriptor to append DMA programs to. Also, the
+ * ring buffer invariant is that it always has at least one
+ * element so that head == tail means buffer full.
+ */
+
+ memset(ctx->head_descriptor, 0, sizeof(*ctx->head_descriptor));
+ ctx->head_descriptor->control = cpu_to_le16(DESCRIPTOR_OUTPUT_LAST);
+ ctx->head_descriptor->transfer_status = cpu_to_le16(0x8011);
+ ctx->head_descriptor++;
+
+ return 0;
+}
+
+static void
+context_release(struct context *ctx)
+{
+ struct fw_card *card = &ctx->ohci->card;
+
+ dma_unmap_single(card->device, ctx->buffer_bus,
+ ctx->buffer_size, DMA_TO_DEVICE);
+ kfree(ctx->buffer);
+}
+
+static struct descriptor *
+context_get_descriptors(struct context *ctx, int z, dma_addr_t *d_bus)
+{
+ struct descriptor *d, *tail, *end;
+
+ d = ctx->head_descriptor;
+ tail = ctx->tail_descriptor;
+ end = ctx->buffer + ctx->buffer_size / sizeof(*d);
+
+ if (d + z <= tail) {
+ goto has_space;
+ } else if (d > tail && d + z <= end) {
+ goto has_space;
+ } else if (d > tail && ctx->buffer + z <= tail) {
+ d = ctx->buffer;
+ goto has_space;
+ }
+
+ return NULL;
+
+ has_space:
+ memset(d, 0, z * sizeof(*d));
+ *d_bus = ctx->buffer_bus + (d - ctx->buffer) * sizeof(*d);
+
+ return d;
+}
+
+static void context_run(struct context *ctx, u32 extra)
+{
+ struct fw_ohci *ohci = ctx->ohci;
+
+ reg_write(ohci, COMMAND_PTR(ctx->regs),
+ le32_to_cpu(ctx->tail_descriptor_last->branch_address));
+ reg_write(ohci, CONTROL_CLEAR(ctx->regs), ~0);
+ reg_write(ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN | extra);
+ flush_writes(ohci);
+}
+
+static void context_append(struct context *ctx,
+ struct descriptor *d, int z, int extra)
+{
+ dma_addr_t d_bus;
+
+ d_bus = ctx->buffer_bus + (d - ctx->buffer) * sizeof(*d);
+
+ ctx->head_descriptor = d + z + extra;
+ ctx->prev_descriptor->branch_address = cpu_to_le32(d_bus | z);
+ ctx->prev_descriptor = z == 2 ? d : d + z - 1;
+
+ dma_sync_single_for_device(ctx->ohci->card.device, ctx->buffer_bus,
+ ctx->buffer_size, DMA_TO_DEVICE);
+
+ reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_WAKE);
+ flush_writes(ctx->ohci);
+}
+
+static void context_stop(struct context *ctx)
+{
+ u32 reg;
+ int i;
+
+ reg_write(ctx->ohci, CONTROL_CLEAR(ctx->regs), CONTEXT_RUN);
+ flush_writes(ctx->ohci);
+
+ for (i = 0; i < 10; i++) {
+ reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
+ if ((reg & CONTEXT_ACTIVE) == 0)
+ break;
+
+ fw_notify("context_stop: still active (0x%08x)\n", reg);
+ msleep(1);
+ }
+}
+
+struct driver_data {
+ struct fw_packet *packet;
+};
+
+/*
+ * This function apppends a packet to the DMA queue for transmission.
+ * Must always be called with the ochi->lock held to ensure proper
+ * generation handling and locking around packet queue manipulation.
+ */
+static int
+at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = ctx->ohci;
+ dma_addr_t d_bus, payload_bus;
+ struct driver_data *driver_data;
+ struct descriptor *d, *last;
+ __le32 *header;
+ int z, tcode;
+ u32 reg;
+
+ d = context_get_descriptors(ctx, 4, &d_bus);
+ if (d == NULL) {
+ packet->ack = RCODE_SEND_ERROR;
+ return -1;
+ }
+
+ d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
+ d[0].res_count = cpu_to_le16(packet->timestamp);
+
+ /*
+ * The DMA format for asyncronous link packets is different
+ * from the IEEE1394 layout, so shift the fields around
+ * accordingly. If header_length is 8, it's a PHY packet, to
+ * which we need to prepend an extra quadlet.
+ */
+
+ header = (__le32 *) &d[1];
+ if (packet->header_length > 8) {
+ header[0] = cpu_to_le32((packet->header[0] & 0xffff) |
+ (packet->speed << 16));
+ header[1] = cpu_to_le32((packet->header[1] & 0xffff) |
+ (packet->header[0] & 0xffff0000));
+ header[2] = cpu_to_le32(packet->header[2]);
+
+ tcode = (packet->header[0] >> 4) & 0x0f;
+ if (TCODE_IS_BLOCK_PACKET(tcode))
+ header[3] = cpu_to_le32(packet->header[3]);
+ else
+ header[3] = (__force __le32) packet->header[3];
+
+ d[0].req_count = cpu_to_le16(packet->header_length);
+ } else {
+ header[0] = cpu_to_le32((OHCI1394_phy_tcode << 4) |
+ (packet->speed << 16));
+ header[1] = cpu_to_le32(packet->header[0]);
+ header[2] = cpu_to_le32(packet->header[1]);
+ d[0].req_count = cpu_to_le16(12);
+ }
+
+ driver_data = (struct driver_data *) &d[3];
+ driver_data->packet = packet;
+ packet->driver_data = driver_data;
+
+ if (packet->payload_length > 0) {
+ payload_bus =
+ dma_map_single(ohci->card.device, packet->payload,
+ packet->payload_length, DMA_TO_DEVICE);
+ if (dma_mapping_error(payload_bus)) {
+ packet->ack = RCODE_SEND_ERROR;
+ return -1;
+ }
+
+ d[2].req_count = cpu_to_le16(packet->payload_length);
+ d[2].data_address = cpu_to_le32(payload_bus);
+ last = &d[2];
+ z = 3;
+ } else {
+ last = &d[0];
+ z = 2;
+ }
+
+ last->control |= cpu_to_le16(DESCRIPTOR_OUTPUT_LAST |
+ DESCRIPTOR_IRQ_ALWAYS |
+ DESCRIPTOR_BRANCH_ALWAYS);
+
+ /* FIXME: Document how the locking works. */
+ if (ohci->generation != packet->generation) {
+ packet->ack = RCODE_GENERATION;
+ return -1;
+ }
+
+ context_append(ctx, d, z, 4 - z);
+
+ /* If the context isn't already running, start it up. */
+ reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs));
+ if ((reg & CONTEXT_RUN) == 0)
+ context_run(ctx, 0);
+
+ return 0;
+}
+
+static int handle_at_packet(struct context *context,
+ struct descriptor *d,
+ struct descriptor *last)
+{
+ struct driver_data *driver_data;
+ struct fw_packet *packet;
+ struct fw_ohci *ohci = context->ohci;
+ dma_addr_t payload_bus;
+ int evt;
+
+ if (last->transfer_status == 0)
+ /* This descriptor isn't done yet, stop iteration. */
+ return 0;
+
+ driver_data = (struct driver_data *) &d[3];
+ packet = driver_data->packet;
+ if (packet == NULL)
+ /* This packet was cancelled, just continue. */
+ return 1;
+
+ payload_bus = le32_to_cpu(last->data_address);
+ if (payload_bus != 0)
+ dma_unmap_single(ohci->card.device, payload_bus,
+ packet->payload_length, DMA_TO_DEVICE);
+
+ evt = le16_to_cpu(last->transfer_status) & 0x1f;
+ packet->timestamp = le16_to_cpu(last->res_count);
+
+ switch (evt) {
+ case OHCI1394_evt_timeout:
+ /* Async response transmit timed out. */
+ packet->ack = RCODE_CANCELLED;
+ break;
+
+ case OHCI1394_evt_flushed:
+ /*
+ * The packet was flushed should give same error as
+ * when we try to use a stale generation count.
+ */
+ packet->ack = RCODE_GENERATION;
+ break;
+
+ case OHCI1394_evt_missing_ack:
+ /*
+ * Using a valid (current) generation count, but the
+ * node is not on the bus or not sending acks.
+ */
+ packet->ack = RCODE_NO_ACK;
+ break;
+
+ case ACK_COMPLETE + 0x10:
+ case ACK_PENDING + 0x10:
+ case ACK_BUSY_X + 0x10:
+ case ACK_BUSY_A + 0x10:
+ case ACK_BUSY_B + 0x10:
+ case ACK_DATA_ERROR + 0x10:
+ case ACK_TYPE_ERROR + 0x10:
+ packet->ack = evt - 0x10;
+ break;
+
+ default:
+ packet->ack = RCODE_SEND_ERROR;
+ break;
+ }
+
+ packet->callback(packet, &ohci->card, packet->ack);
+
+ return 1;
+}
+
+#define HEADER_GET_DESTINATION(q) (((q) >> 16) & 0xffff)
+#define HEADER_GET_TCODE(q) (((q) >> 4) & 0x0f)
+#define HEADER_GET_OFFSET_HIGH(q) (((q) >> 0) & 0xffff)
+#define HEADER_GET_DATA_LENGTH(q) (((q) >> 16) & 0xffff)
+#define HEADER_GET_EXTENDED_TCODE(q) (((q) >> 0) & 0xffff)
+
+static void
+handle_local_rom(struct fw_ohci *ohci, struct fw_packet *packet, u32 csr)
+{
+ struct fw_packet response;
+ int tcode, length, i;
+
+ tcode = HEADER_GET_TCODE(packet->header[0]);
+ if (TCODE_IS_BLOCK_PACKET(tcode))
+ length = HEADER_GET_DATA_LENGTH(packet->header[3]);
+ else
+ length = 4;
+
+ i = csr - CSR_CONFIG_ROM;
+ if (i + length > CONFIG_ROM_SIZE) {
+ fw_fill_response(&response, packet->header,
+ RCODE_ADDRESS_ERROR, NULL, 0);
+ } else if (!TCODE_IS_READ_REQUEST(tcode)) {
+ fw_fill_response(&response, packet->header,
+ RCODE_TYPE_ERROR, NULL, 0);
+ } else {
+ fw_fill_response(&response, packet->header, RCODE_COMPLETE,
+ (void *) ohci->config_rom + i, length);
+ }
+
+ fw_core_handle_response(&ohci->card, &response);
+}
+
+static void
+handle_local_lock(struct fw_ohci *ohci, struct fw_packet *packet, u32 csr)
+{
+ struct fw_packet response;
+ int tcode, length, ext_tcode, sel;
+ __be32 *payload, lock_old;
+ u32 lock_arg, lock_data;
+
+ tcode = HEADER_GET_TCODE(packet->header[0]);
+ length = HEADER_GET_DATA_LENGTH(packet->header[3]);
+ payload = packet->payload;
+ ext_tcode = HEADER_GET_EXTENDED_TCODE(packet->header[3]);
+
+ if (tcode == TCODE_LOCK_REQUEST &&
+ ext_tcode == EXTCODE_COMPARE_SWAP && length == 8) {
+ lock_arg = be32_to_cpu(payload[0]);
+ lock_data = be32_to_cpu(payload[1]);
+ } else if (tcode == TCODE_READ_QUADLET_REQUEST) {
+ lock_arg = 0;
+ lock_data = 0;
+ } else {
+ fw_fill_response(&response, packet->header,
+ RCODE_TYPE_ERROR, NULL, 0);
+ goto out;
+ }
+
+ sel = (csr - CSR_BUS_MANAGER_ID) / 4;
+ reg_write(ohci, OHCI1394_CSRData, lock_data);
+ reg_write(ohci, OHCI1394_CSRCompareData, lock_arg);
+ reg_write(ohci, OHCI1394_CSRControl, sel);
+
+ if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000)
+ lock_old = cpu_to_be32(reg_read(ohci, OHCI1394_CSRData));
+ else
+ fw_notify("swap not done yet\n");
+
+ fw_fill_response(&response, packet->header,
+ RCODE_COMPLETE, &lock_old, sizeof(lock_old));
+ out:
+ fw_core_handle_response(&ohci->card, &response);
+}
+
+static void
+handle_local_request(struct context *ctx, struct fw_packet *packet)
+{
+ u64 offset;
+ u32 csr;
+
+ if (ctx == &ctx->ohci->at_request_ctx) {
+ packet->ack = ACK_PENDING;
+ packet->callback(packet, &ctx->ohci->card, packet->ack);
+ }
+
+ offset =
+ ((unsigned long long)
+ HEADER_GET_OFFSET_HIGH(packet->header[1]) << 32) |
+ packet->header[2];
+ csr = offset - CSR_REGISTER_BASE;
+
+ /* Handle config rom reads. */
+ if (csr >= CSR_CONFIG_ROM && csr < CSR_CONFIG_ROM_END)
+ handle_local_rom(ctx->ohci, packet, csr);
+ else switch (csr) {
+ case CSR_BUS_MANAGER_ID:
+ case CSR_BANDWIDTH_AVAILABLE:
+ case CSR_CHANNELS_AVAILABLE_HI:
+ case CSR_CHANNELS_AVAILABLE_LO:
+ handle_local_lock(ctx->ohci, packet, csr);
+ break;
+ default:
+ if (ctx == &ctx->ohci->at_request_ctx)
+ fw_core_handle_request(&ctx->ohci->card, packet);
+ else
+ fw_core_handle_response(&ctx->ohci->card, packet);
+ break;
+ }
+
+ if (ctx == &ctx->ohci->at_response_ctx) {
+ packet->ack = ACK_COMPLETE;
+ packet->callback(packet, &ctx->ohci->card, packet->ack);
+ }
+}
+
+static void
+at_context_transmit(struct context *ctx, struct fw_packet *packet)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&ctx->ohci->lock, flags);
+
+ if (HEADER_GET_DESTINATION(packet->header[0]) == ctx->ohci->node_id &&
+ ctx->ohci->generation == packet->generation) {
+ spin_unlock_irqrestore(&ctx->ohci->lock, flags);
+ handle_local_request(ctx, packet);
+ return;
+ }
+
+ retval = at_context_queue_packet(ctx, packet);
+ spin_unlock_irqrestore(&ctx->ohci->lock, flags);
+
+ if (retval < 0)
+ packet->callback(packet, &ctx->ohci->card, packet->ack);
+
+}
+
+static void bus_reset_tasklet(unsigned long data)
+{
+ struct fw_ohci *ohci = (struct fw_ohci *)data;
+ int self_id_count, i, j, reg;
+ int generation, new_generation;
+ unsigned long flags;
+
+ reg = reg_read(ohci, OHCI1394_NodeID);
+ if (!(reg & OHCI1394_NodeID_idValid)) {
+ fw_error("node ID not valid, new bus reset in progress\n");
+ return;
+ }
+ ohci->node_id = reg & 0xffff;
+
+ /*
+ * The count in the SelfIDCount register is the number of
+ * bytes in the self ID receive buffer. Since we also receive
+ * the inverted quadlets and a header quadlet, we shift one
+ * bit extra to get the actual number of self IDs.
+ */
+
+ self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff;
+ generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
+
+ for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
+ if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1])
+ fw_error("inconsistent self IDs\n");
+ ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]);
+ }
+
+ /*
+ * Check the consistency of the self IDs we just read. The
+ * problem we face is that a new bus reset can start while we
+ * read out the self IDs from the DMA buffer. If this happens,
+ * the DMA buffer will be overwritten with new self IDs and we
+ * will read out inconsistent data. The OHCI specification
+ * (section 11.2) recommends a technique similar to
+ * linux/seqlock.h, where we remember the generation of the
+ * self IDs in the buffer before reading them out and compare
+ * it to the current generation after reading them out. If
+ * the two generations match we know we have a consistent set
+ * of self IDs.
+ */
+
+ new_generation = (reg_read(ohci, OHCI1394_SelfIDCount) >> 16) & 0xff;
+ if (new_generation != generation) {
+ fw_notify("recursive bus reset detected, "
+ "discarding self ids\n");
+ return;
+ }
+
+ /* FIXME: Document how the locking works. */
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ ohci->generation = generation;
+ context_stop(&ohci->at_request_ctx);
+ context_stop(&ohci->at_response_ctx);
+ reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
+
+ /*
+ * This next bit is unrelated to the AT context stuff but we
+ * have to do it under the spinlock also. If a new config rom
+ * was set up before this reset, the old one is now no longer
+ * in use and we can free it. Update the config rom pointers
+ * to point to the current config rom and clear the
+ * next_config_rom pointer so a new udpate can take place.
+ */
+
+ if (ohci->next_config_rom != NULL) {
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ ohci->config_rom, ohci->config_rom_bus);
+ ohci->config_rom = ohci->next_config_rom;
+ ohci->config_rom_bus = ohci->next_config_rom_bus;
+ ohci->next_config_rom = NULL;
+
+ /*
+ * Restore config_rom image and manually update
+ * config_rom registers. Writing the header quadlet
+ * will indicate that the config rom is ready, so we
+ * do that last.
+ */
+ reg_write(ohci, OHCI1394_BusOptions,
+ be32_to_cpu(ohci->config_rom[2]));
+ ohci->config_rom[0] = cpu_to_be32(ohci->next_header);
+ reg_write(ohci, OHCI1394_ConfigROMhdr, ohci->next_header);
+ }
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ fw_core_handle_bus_reset(&ohci->card, ohci->node_id, generation,
+ self_id_count, ohci->self_id_buffer);
+}
+
+static irqreturn_t irq_handler(int irq, void *data)
+{
+ struct fw_ohci *ohci = data;
+ u32 event, iso_event, cycle_time;
+ int i;
+
+ event = reg_read(ohci, OHCI1394_IntEventClear);
+
+ if (!event)
+ return IRQ_NONE;
+
+ reg_write(ohci, OHCI1394_IntEventClear, event);
+
+ if (event & OHCI1394_selfIDComplete)
+ tasklet_schedule(&ohci->bus_reset_tasklet);
+
+ if (event & OHCI1394_RQPkt)
+ tasklet_schedule(&ohci->ar_request_ctx.tasklet);
+
+ if (event & OHCI1394_RSPkt)
+ tasklet_schedule(&ohci->ar_response_ctx.tasklet);
+
+ if (event & OHCI1394_reqTxComplete)
+ tasklet_schedule(&ohci->at_request_ctx.tasklet);
+
+ if (event & OHCI1394_respTxComplete)
+ tasklet_schedule(&ohci->at_response_ctx.tasklet);
+
+ iso_event = reg_read(ohci, OHCI1394_IsoRecvIntEventClear);
+ reg_write(ohci, OHCI1394_IsoRecvIntEventClear, iso_event);
+
+ while (iso_event) {
+ i = ffs(iso_event) - 1;
+ tasklet_schedule(&ohci->ir_context_list[i].context.tasklet);
+ iso_event &= ~(1 << i);
+ }
+
+ iso_event = reg_read(ohci, OHCI1394_IsoXmitIntEventClear);
+ reg_write(ohci, OHCI1394_IsoXmitIntEventClear, iso_event);
+
+ while (iso_event) {
+ i = ffs(iso_event) - 1;
+ tasklet_schedule(&ohci->it_context_list[i].context.tasklet);
+ iso_event &= ~(1 << i);
+ }
+
+ if (event & OHCI1394_cycle64Seconds) {
+ cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
+ if ((cycle_time & 0x80000000) == 0)
+ ohci->bus_seconds++;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ struct pci_dev *dev = to_pci_dev(card->device);
+
+ /*
+ * When the link is not yet enabled, the atomic config rom
+ * update mechanism described below in ohci_set_config_rom()
+ * is not active. We have to update ConfigRomHeader and
+ * BusOptions manually, and the write to ConfigROMmap takes
+ * effect immediately. We tie this to the enabling of the
+ * link, so we have a valid config rom before enabling - the
+ * OHCI requires that ConfigROMhdr and BusOptions have valid
+ * values before enabling.
+ *
+ * However, when the ConfigROMmap is written, some controllers
+ * always read back quadlets 0 and 2 from the config rom to
+ * the ConfigRomHeader and BusOptions registers on bus reset.
+ * They shouldn't do that in this initial case where the link
+ * isn't enabled. This means we have to use the same
+ * workaround here, setting the bus header to 0 and then write
+ * the right values in the bus reset tasklet.
+ */
+
+ ohci->next_config_rom =
+ dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ &ohci->next_config_rom_bus, GFP_KERNEL);
+ if (ohci->next_config_rom == NULL)
+ return -ENOMEM;
+
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+
+ ohci->next_header = config_rom[0];
+ ohci->next_config_rom[0] = 0;
+ reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
+ reg_write(ohci, OHCI1394_BusOptions, config_rom[2]);
+ reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
+
+ reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
+
+ if (request_irq(dev->irq, irq_handler,
+ IRQF_SHARED, ohci_driver_name, ohci)) {
+ fw_error("Failed to allocate shared interrupt %d.\n",
+ dev->irq);
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ ohci->config_rom, ohci->config_rom_bus);
+ return -EIO;
+ }
+
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_linkEnable |
+ OHCI1394_HCControl_BIBimageValid);
+ flush_writes(ohci);
+
+ /*
+ * We are ready to go, initiate bus reset to finish the
+ * initialization.
+ */
+
+ fw_core_initiate_bus_reset(&ohci->card, 1);
+
+ return 0;
+}
+
+static int
+ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length)
+{
+ struct fw_ohci *ohci;
+ unsigned long flags;
+ int retval = 0;
+ __be32 *next_config_rom;
+ dma_addr_t next_config_rom_bus;
+
+ ohci = fw_ohci(card);
+
+ /*
+ * When the OHCI controller is enabled, the config rom update
+ * mechanism is a bit tricky, but easy enough to use. See
+ * section 5.5.6 in the OHCI specification.
+ *
+ * The OHCI controller caches the new config rom address in a
+ * shadow register (ConfigROMmapNext) and needs a bus reset
+ * for the changes to take place. When the bus reset is
+ * detected, the controller loads the new values for the
+ * ConfigRomHeader and BusOptions registers from the specified
+ * config rom and loads ConfigROMmap from the ConfigROMmapNext
+ * shadow register. All automatically and atomically.
+ *
+ * Now, there's a twist to this story. The automatic load of
+ * ConfigRomHeader and BusOptions doesn't honor the
+ * noByteSwapData bit, so with a be32 config rom, the
+ * controller will load be32 values in to these registers
+ * during the atomic update, even on litte endian
+ * architectures. The workaround we use is to put a 0 in the
+ * header quadlet; 0 is endian agnostic and means that the
+ * config rom isn't ready yet. In the bus reset tasklet we
+ * then set up the real values for the two registers.
+ *
+ * We use ohci->lock to avoid racing with the code that sets
+ * ohci->next_config_rom to NULL (see bus_reset_tasklet).
+ */
+
+ next_config_rom =
+ dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ &next_config_rom_bus, GFP_KERNEL);
+ if (next_config_rom == NULL)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ohci->next_config_rom == NULL) {
+ ohci->next_config_rom = next_config_rom;
+ ohci->next_config_rom_bus = next_config_rom_bus;
+
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom,
+ length * 4);
+
+ ohci->next_header = config_rom[0];
+ ohci->next_config_rom[0] = 0;
+
+ reg_write(ohci, OHCI1394_ConfigROMmap,
+ ohci->next_config_rom_bus);
+ } else {
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ next_config_rom, next_config_rom_bus);
+ retval = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ /*
+ * Now initiate a bus reset to have the changes take
+ * effect. We clean up the old config rom memory and DMA
+ * mappings in the bus reset tasklet, since the OHCI
+ * controller could need to access it before the bus reset
+ * takes effect.
+ */
+ if (retval == 0)
+ fw_core_initiate_bus_reset(&ohci->card, 1);
+
+ return retval;
+}
+
+static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ at_context_transmit(&ohci->at_request_ctx, packet);
+}
+
+static void ohci_send_response(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+
+ at_context_transmit(&ohci->at_response_ctx, packet);
+}
+
+static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ struct context *ctx = &ohci->at_request_ctx;
+ struct driver_data *driver_data = packet->driver_data;
+ int retval = -ENOENT;
+
+ tasklet_disable(&ctx->tasklet);
+
+ if (packet->ack != 0)
+ goto out;
+
+ driver_data->packet = NULL;
+ packet->ack = RCODE_CANCELLED;
+ packet->callback(packet, &ohci->card, packet->ack);
+ retval = 0;
+
+ out:
+ tasklet_enable(&ctx->tasklet);
+
+ return retval;
+}
+
+static int
+ohci_enable_phys_dma(struct fw_card *card, int node_id, int generation)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ unsigned long flags;
+ int n, retval = 0;
+
+ /*
+ * FIXME: Make sure this bitmask is cleared when we clear the busReset
+ * interrupt bit. Clear physReqResourceAllBuses on bus reset.
+ */
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ohci->generation != generation) {
+ retval = -ESTALE;
+ goto out;
+ }
+
+ /*
+ * Note, if the node ID contains a non-local bus ID, physical DMA is
+ * enabled for _all_ nodes on remote buses.
+ */
+
+ n = (node_id & 0xffc0) == LOCAL_BUS ? node_id & 0x3f : 63;
+ if (n < 32)
+ reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 1 << n);
+ else
+ reg_write(ohci, OHCI1394_PhyReqFilterHiSet, 1 << (n - 32));
+
+ flush_writes(ohci);
+ out:
+ spin_unlock_irqrestore(&ohci->lock, flags);
+ return retval;
+}
+
+static u64
+ohci_get_bus_time(struct fw_card *card)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ u32 cycle_time;
+ u64 bus_time;
+
+ cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
+ bus_time = ((u64) ohci->bus_seconds << 32) | cycle_time;
+
+ return bus_time;
+}
+
+static int handle_ir_dualbuffer_packet(struct context *context,
+ struct descriptor *d,
+ struct descriptor *last)
+{
+ struct iso_context *ctx =
+ container_of(context, struct iso_context, context);
+ struct db_descriptor *db = (struct db_descriptor *) d;
+ __le32 *ir_header;
+ size_t header_length;
+ void *p, *end;
+ int i;
+
+ if (db->first_res_count > 0 && db->second_res_count > 0)
+ /* This descriptor isn't done yet, stop iteration. */
+ return 0;
+
+ header_length = le16_to_cpu(db->first_req_count) -
+ le16_to_cpu(db->first_res_count);
+
+ i = ctx->header_length;
+ p = db + 1;
+ end = p + header_length;
+ while (p < end && i + ctx->base.header_size <= PAGE_SIZE) {
+ /*
+ * The iso header is byteswapped to little endian by
+ * the controller, but the remaining header quadlets
+ * are big endian. We want to present all the headers
+ * as big endian, so we have to swap the first
+ * quadlet.
+ */
+ *(u32 *) (ctx->header + i) = __swab32(*(u32 *) (p + 4));
+ memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4);
+ i += ctx->base.header_size;
+ p += ctx->base.header_size + 4;
+ }
+
+ ctx->header_length = i;
+
+ if (le16_to_cpu(db->control) & DESCRIPTOR_IRQ_ALWAYS) {
+ ir_header = (__le32 *) (db + 1);
+ ctx->base.callback(&ctx->base,
+ le32_to_cpu(ir_header[0]) & 0xffff,
+ ctx->header_length, ctx->header,
+ ctx->base.callback_data);
+ ctx->header_length = 0;
+ }
+
+ return 1;
+}
+
+static int handle_it_packet(struct context *context,
+ struct descriptor *d,
+ struct descriptor *last)
+{
+ struct iso_context *ctx =
+ container_of(context, struct iso_context, context);
+
+ if (last->transfer_status == 0)
+ /* This descriptor isn't done yet, stop iteration. */
+ return 0;
+
+ if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
+ ctx->base.callback(&ctx->base, le16_to_cpu(last->res_count),
+ 0, NULL, ctx->base.callback_data);
+
+ return 1;
+}
+
+static struct fw_iso_context *
+ohci_allocate_iso_context(struct fw_card *card, int type, size_t header_size)
+{
+ struct fw_ohci *ohci = fw_ohci(card);
+ struct iso_context *ctx, *list;
+ descriptor_callback_t callback;
+ u32 *mask, regs;
+ unsigned long flags;
+ int index, retval = -ENOMEM;
+
+ if (type == FW_ISO_CONTEXT_TRANSMIT) {
+ mask = &ohci->it_context_mask;
+ list = ohci->it_context_list;
+ callback = handle_it_packet;
+ } else {
+ mask = &ohci->ir_context_mask;
+ list = ohci->ir_context_list;
+ callback = handle_ir_dualbuffer_packet;
+ }
+
+ /* FIXME: We need a fallback for pre 1.1 OHCI. */
+ if (callback == handle_ir_dualbuffer_packet &&
+ ohci->version < OHCI_VERSION_1_1)
+ return ERR_PTR(-EINVAL);
+
+ spin_lock_irqsave(&ohci->lock, flags);
+ index = ffs(*mask) - 1;
+ if (index >= 0)
+ *mask &= ~(1 << index);
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ if (index < 0)
+ return ERR_PTR(-EBUSY);
+
+ if (type == FW_ISO_CONTEXT_TRANSMIT)
+ regs = OHCI1394_IsoXmitContextBase(index);
+ else
+ regs = OHCI1394_IsoRcvContextBase(index);
+
+ ctx = &list[index];
+ memset(ctx, 0, sizeof(*ctx));
+ ctx->header_length = 0;
+ ctx->header = (void *) __get_free_page(GFP_KERNEL);
+ if (ctx->header == NULL)
+ goto out;
+
+ retval = context_init(&ctx->context, ohci, ISO_BUFFER_SIZE,
+ regs, callback);
+ if (retval < 0)
+ goto out_with_header;
+
+ return &ctx->base;
+
+ out_with_header:
+ free_page((unsigned long)ctx->header);
+ out:
+ spin_lock_irqsave(&ohci->lock, flags);
+ *mask |= 1 << index;
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ return ERR_PTR(retval);
+}
+
+static int ohci_start_iso(struct fw_iso_context *base,
+ s32 cycle, u32 sync, u32 tags)
+{
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+ struct fw_ohci *ohci = ctx->context.ohci;
+ u32 control, match;
+ int index;
+
+ if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+ index = ctx - ohci->it_context_list;
+ match = 0;
+ if (cycle >= 0)
+ match = IT_CONTEXT_CYCLE_MATCH_ENABLE |
+ (cycle & 0x7fff) << 16;
+
+ reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 1 << index);
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index);
+ context_run(&ctx->context, match);
+ } else {
+ index = ctx - ohci->ir_context_list;
+ control = IR_CONTEXT_DUAL_BUFFER_MODE | IR_CONTEXT_ISOCH_HEADER;
+ match = (tags << 28) | (sync << 8) | ctx->base.channel;
+ if (cycle >= 0) {
+ match |= (cycle & 0x07fff) << 12;
+ control |= IR_CONTEXT_CYCLE_MATCH_ENABLE;
+ }
+
+ reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 1 << index);
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << index);
+ reg_write(ohci, CONTEXT_MATCH(ctx->context.regs), match);
+ context_run(&ctx->context, control);
+ }
+
+ return 0;
+}
+
+static int ohci_stop_iso(struct fw_iso_context *base)
+{
+ struct fw_ohci *ohci = fw_ohci(base->card);
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+ int index;
+
+ if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+ index = ctx - ohci->it_context_list;
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index);
+ } else {
+ index = ctx - ohci->ir_context_list;
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index);
+ }
+ flush_writes(ohci);
+ context_stop(&ctx->context);
+
+ return 0;
+}
+
+static void ohci_free_iso_context(struct fw_iso_context *base)
+{
+ struct fw_ohci *ohci = fw_ohci(base->card);
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+ unsigned long flags;
+ int index;
+
+ ohci_stop_iso(base);
+ context_release(&ctx->context);
+ free_page((unsigned long)ctx->header);
+
+ spin_lock_irqsave(&ohci->lock, flags);
+
+ if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+ index = ctx - ohci->it_context_list;
+ ohci->it_context_mask |= 1 << index;
+ } else {
+ index = ctx - ohci->ir_context_list;
+ ohci->ir_context_mask |= 1 << index;
+ }
+
+ spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
+static int
+ohci_queue_iso_transmit(struct fw_iso_context *base,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload)
+{
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+ struct descriptor *d, *last, *pd;
+ struct fw_iso_packet *p;
+ __le32 *header;
+ dma_addr_t d_bus, page_bus;
+ u32 z, header_z, payload_z, irq;
+ u32 payload_index, payload_end_index, next_page_index;
+ int page, end_page, i, length, offset;
+
+ /*
+ * FIXME: Cycle lost behavior should be configurable: lose
+ * packet, retransmit or terminate..
+ */
+
+ p = packet;
+ payload_index = payload;
+
+ if (p->skip)
+ z = 1;
+ else
+ z = 2;
+ if (p->header_length > 0)
+ z++;
+
+ /* Determine the first page the payload isn't contained in. */
+ end_page = PAGE_ALIGN(payload_index + p->payload_length) >> PAGE_SHIFT;
+ if (p->payload_length > 0)
+ payload_z = end_page - (payload_index >> PAGE_SHIFT);
+ else
+ payload_z = 0;
+
+ z += payload_z;
+
+ /* Get header size in number of descriptors. */
+ header_z = DIV_ROUND_UP(p->header_length, sizeof(*d));
+
+ d = context_get_descriptors(&ctx->context, z + header_z, &d_bus);
+ if (d == NULL)
+ return -ENOMEM;
+
+ if (!p->skip) {
+ d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
+ d[0].req_count = cpu_to_le16(8);
+
+ header = (__le32 *) &d[1];
+ header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
+ IT_HEADER_TAG(p->tag) |
+ IT_HEADER_TCODE(TCODE_STREAM_DATA) |
+ IT_HEADER_CHANNEL(ctx->base.channel) |
+ IT_HEADER_SPEED(ctx->base.speed));
+ header[1] =
+ cpu_to_le32(IT_HEADER_DATA_LENGTH(p->header_length +
+ p->payload_length));
+ }
+
+ if (p->header_length > 0) {
+ d[2].req_count = cpu_to_le16(p->header_length);
+ d[2].data_address = cpu_to_le32(d_bus + z * sizeof(*d));
+ memcpy(&d[z], p->header, p->header_length);
+ }
+
+ pd = d + z - payload_z;
+ payload_end_index = payload_index + p->payload_length;
+ for (i = 0; i < payload_z; i++) {
+ page = payload_index >> PAGE_SHIFT;
+ offset = payload_index & ~PAGE_MASK;
+ next_page_index = (page + 1) << PAGE_SHIFT;
+ length =
+ min(next_page_index, payload_end_index) - payload_index;
+ pd[i].req_count = cpu_to_le16(length);
+
+ page_bus = page_private(buffer->pages[page]);
+ pd[i].data_address = cpu_to_le32(page_bus + offset);
+
+ payload_index += length;
+ }
+
+ if (p->interrupt)
+ irq = DESCRIPTOR_IRQ_ALWAYS;
+ else
+ irq = DESCRIPTOR_NO_IRQ;
+
+ last = z == 2 ? d : d + z - 1;
+ last->control |= cpu_to_le16(DESCRIPTOR_OUTPUT_LAST |
+ DESCRIPTOR_STATUS |
+ DESCRIPTOR_BRANCH_ALWAYS |
+ irq);
+
+ context_append(&ctx->context, d, z, header_z);
+
+ return 0;
+}
+
+static int
+ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload)
+{
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+ struct db_descriptor *db = NULL;
+ struct descriptor *d;
+ struct fw_iso_packet *p;
+ dma_addr_t d_bus, page_bus;
+ u32 z, header_z, length, rest;
+ int page, offset, packet_count, header_size;
+
+ /*
+ * FIXME: Cycle lost behavior should be configurable: lose
+ * packet, retransmit or terminate..
+ */
+
+ if (packet->skip) {
+ d = context_get_descriptors(&ctx->context, 2, &d_bus);
+ if (d == NULL)
+ return -ENOMEM;
+
+ db = (struct db_descriptor *) d;
+ db->control = cpu_to_le16(DESCRIPTOR_STATUS |
+ DESCRIPTOR_BRANCH_ALWAYS |
+ DESCRIPTOR_WAIT);
+ db->first_size = cpu_to_le16(ctx->base.header_size + 4);
+ context_append(&ctx->context, d, 2, 0);
+ }
+
+ p = packet;
+ z = 2;
+
+ /*
+ * The OHCI controller puts the status word in the header
+ * buffer too, so we need 4 extra bytes per packet.
+ */
+ packet_count = p->header_length / ctx->base.header_size;
+ header_size = packet_count * (ctx->base.header_size + 4);
+
+ /* Get header size in number of descriptors. */
+ header_z = DIV_ROUND_UP(header_size, sizeof(*d));
+ page = payload >> PAGE_SHIFT;
+ offset = payload & ~PAGE_MASK;
+ rest = p->payload_length;
+
+ /* FIXME: OHCI 1.0 doesn't support dual buffer receive */
+ /* FIXME: make packet-per-buffer/dual-buffer a context option */
+ while (rest > 0) {
+ d = context_get_descriptors(&ctx->context,
+ z + header_z, &d_bus);
+ if (d == NULL)
+ return -ENOMEM;
+
+ db = (struct db_descriptor *) d;
+ db->control = cpu_to_le16(DESCRIPTOR_STATUS |
+ DESCRIPTOR_BRANCH_ALWAYS);
+ db->first_size = cpu_to_le16(ctx->base.header_size + 4);
+ db->first_req_count = cpu_to_le16(header_size);
+ db->first_res_count = db->first_req_count;
+ db->first_buffer = cpu_to_le32(d_bus + sizeof(*db));
+
+ if (offset + rest < PAGE_SIZE)
+ length = rest;
+ else
+ length = PAGE_SIZE - offset;
+
+ db->second_req_count = cpu_to_le16(length);
+ db->second_res_count = db->second_req_count;
+ page_bus = page_private(buffer->pages[page]);
+ db->second_buffer = cpu_to_le32(page_bus + offset);
+
+ if (p->interrupt && length == rest)
+ db->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
+
+ context_append(&ctx->context, d, z, header_z);
+ offset = (offset + length) & ~PAGE_MASK;
+ rest -= length;
+ page++;
+ }
+
+ return 0;
+}
+
+static int
+ohci_queue_iso(struct fw_iso_context *base,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload)
+{
+ struct iso_context *ctx = container_of(base, struct iso_context, base);
+
+ if (base->type == FW_ISO_CONTEXT_TRANSMIT)
+ return ohci_queue_iso_transmit(base, packet, buffer, payload);
+ else if (ctx->context.ohci->version >= OHCI_VERSION_1_1)
+ return ohci_queue_iso_receive_dualbuffer(base, packet,
+ buffer, payload);
+ else
+ /* FIXME: Implement fallback for OHCI 1.0 controllers. */
+ return -EINVAL;
+}
+
+static const struct fw_card_driver ohci_driver = {
+ .name = ohci_driver_name,
+ .enable = ohci_enable,
+ .update_phy_reg = ohci_update_phy_reg,
+ .set_config_rom = ohci_set_config_rom,
+ .send_request = ohci_send_request,
+ .send_response = ohci_send_response,
+ .cancel_packet = ohci_cancel_packet,
+ .enable_phys_dma = ohci_enable_phys_dma,
+ .get_bus_time = ohci_get_bus_time,
+
+ .allocate_iso_context = ohci_allocate_iso_context,
+ .free_iso_context = ohci_free_iso_context,
+ .queue_iso = ohci_queue_iso,
+ .start_iso = ohci_start_iso,
+ .stop_iso = ohci_stop_iso,
+};
+
+static int software_reset(struct fw_ohci *ohci)
+{
+ int i;
+
+ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
+
+ for (i = 0; i < OHCI_LOOP_COUNT; i++) {
+ if ((reg_read(ohci, OHCI1394_HCControlSet) &
+ OHCI1394_HCControl_softReset) == 0)
+ return 0;
+ msleep(1);
+ }
+
+ return -EBUSY;
+}
+
+static int __devinit
+pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct fw_ohci *ohci;
+ u32 bus_options, max_receive, link_speed;
+ u64 guid;
+ int err;
+ size_t size;
+
+ ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
+ if (ohci == NULL) {
+ fw_error("Could not malloc fw_ohci data.\n");
+ return -ENOMEM;
+ }
+
+ fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev);
+
+ err = pci_enable_device(dev);
+ if (err) {
+ fw_error("Failed to enable OHCI hardware.\n");
+ goto fail_put_card;
+ }
+
+ pci_set_master(dev);
+ pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0);
+ pci_set_drvdata(dev, ohci);
+
+ spin_lock_init(&ohci->lock);
+
+ tasklet_init(&ohci->bus_reset_tasklet,
+ bus_reset_tasklet, (unsigned long)ohci);
+
+ err = pci_request_region(dev, 0, ohci_driver_name);
+ if (err) {
+ fw_error("MMIO resource unavailable\n");
+ goto fail_disable;
+ }
+
+ ohci->registers = pci_iomap(dev, 0, OHCI1394_REGISTER_SIZE);
+ if (ohci->registers == NULL) {
+ fw_error("Failed to remap registers\n");
+ err = -ENXIO;
+ goto fail_iomem;
+ }
+
+ if (software_reset(ohci)) {
+ fw_error("Failed to reset ohci card.\n");
+ err = -EBUSY;
+ goto fail_registers;
+ }
+
+ /*
+ * Now enable LPS, which we need in order to start accessing
+ * most of the registers. In fact, on some cards (ALI M5251),
+ * accessing registers in the SClk domain without LPS enabled
+ * will lock up the machine. Wait 50msec to make sure we have
+ * full link enabled.
+ */
+ reg_write(ohci, OHCI1394_HCControlSet,
+ OHCI1394_HCControl_LPS |
+ OHCI1394_HCControl_postedWriteEnable);
+ flush_writes(ohci);
+ msleep(50);
+
+ reg_write(ohci, OHCI1394_HCControlClear,
+ OHCI1394_HCControl_noByteSwapData);
+
+ reg_write(ohci, OHCI1394_LinkControlSet,
+ OHCI1394_LinkControl_rcvSelfID |
+ OHCI1394_LinkControl_cycleTimerEnable |
+ OHCI1394_LinkControl_cycleMaster);
+
+ ar_context_init(&ohci->ar_request_ctx, ohci,
+ OHCI1394_AsReqRcvContextControlSet);
+
+ ar_context_init(&ohci->ar_response_ctx, ohci,
+ OHCI1394_AsRspRcvContextControlSet);
+
+ context_init(&ohci->at_request_ctx, ohci, AT_BUFFER_SIZE,
+ OHCI1394_AsReqTrContextControlSet, handle_at_packet);
+
+ context_init(&ohci->at_response_ctx, ohci, AT_BUFFER_SIZE,
+ OHCI1394_AsRspTrContextControlSet, handle_at_packet);
+
+ reg_write(ohci, OHCI1394_ATRetries,
+ OHCI1394_MAX_AT_REQ_RETRIES |
+ (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
+ (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
+
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, ~0);
+ ohci->it_context_mask = reg_read(ohci, OHCI1394_IsoRecvIntMaskSet);
+ reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, ~0);
+ size = sizeof(struct iso_context) * hweight32(ohci->it_context_mask);
+ ohci->it_context_list = kzalloc(size, GFP_KERNEL);
+
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, ~0);
+ ohci->ir_context_mask = reg_read(ohci, OHCI1394_IsoXmitIntMaskSet);
+ reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, ~0);
+ size = sizeof(struct iso_context) * hweight32(ohci->ir_context_mask);
+ ohci->ir_context_list = kzalloc(size, GFP_KERNEL);
+
+ if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) {
+ fw_error("Out of memory for it/ir contexts.\n");
+ err = -ENOMEM;
+ goto fail_registers;
+ }
+
+ /* self-id dma buffer allocation */
+ ohci->self_id_cpu = dma_alloc_coherent(ohci->card.device,
+ SELF_ID_BUF_SIZE,
+ &ohci->self_id_bus,
+ GFP_KERNEL);
+ if (ohci->self_id_cpu == NULL) {
+ fw_error("Out of memory for self ID buffer.\n");
+ err = -ENOMEM;
+ goto fail_registers;
+ }
+
+ reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
+ reg_write(ohci, OHCI1394_IntEventClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskClear, ~0);
+ reg_write(ohci, OHCI1394_IntMaskSet,
+ OHCI1394_selfIDComplete |
+ OHCI1394_RQPkt | OHCI1394_RSPkt |
+ OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
+ OHCI1394_isochRx | OHCI1394_isochTx |
+ OHCI1394_masterIntEnable |
+ OHCI1394_cycle64Seconds);
+
+ bus_options = reg_read(ohci, OHCI1394_BusOptions);
+ max_receive = (bus_options >> 12) & 0xf;
+ link_speed = bus_options & 0x7;
+ guid = ((u64) reg_read(ohci, OHCI1394_GUIDHi) << 32) |
+ reg_read(ohci, OHCI1394_GUIDLo);
+
+ err = fw_card_add(&ohci->card, max_receive, link_speed, guid);
+ if (err < 0)
+ goto fail_self_id;
+
+ ohci->version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
+ fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
+ dev->dev.bus_id, ohci->version >> 16, ohci->version & 0xff);
+
+ return 0;
+
+ fail_self_id:
+ dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE,
+ ohci->self_id_cpu, ohci->self_id_bus);
+ fail_registers:
+ kfree(ohci->it_context_list);
+ kfree(ohci->ir_context_list);
+ pci_iounmap(dev, ohci->registers);
+ fail_iomem:
+ pci_release_region(dev, 0);
+ fail_disable:
+ pci_disable_device(dev);
+ fail_put_card:
+ fw_card_put(&ohci->card);
+
+ return err;
+}
+
+static void pci_remove(struct pci_dev *dev)
+{
+ struct fw_ohci *ohci;
+
+ ohci = pci_get_drvdata(dev);
+ reg_write(ohci, OHCI1394_IntMaskClear, ~0);
+ flush_writes(ohci);
+ fw_core_remove_card(&ohci->card);
+
+ /*
+ * FIXME: Fail all pending packets here, now that the upper
+ * layers can't queue any more.
+ */
+
+ software_reset(ohci);
+ free_irq(dev->irq, ohci);
+ dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE,
+ ohci->self_id_cpu, ohci->self_id_bus);
+ kfree(ohci->it_context_list);
+ kfree(ohci->ir_context_list);
+ pci_iounmap(dev, ohci->registers);
+ pci_release_region(dev, 0);
+ pci_disable_device(dev);
+ fw_card_put(&ohci->card);
+
+ fw_notify("Removed fw-ohci device.\n");
+}
+
+static struct pci_device_id pci_table[] = {
+ { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_FIREWIRE_OHCI, ~0) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_table);
+
+static struct pci_driver fw_ohci_pci_driver = {
+ .name = ohci_driver_name,
+ .id_table = pci_table,
+ .probe = pci_probe,
+ .remove = pci_remove,
+};
+
+MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
+MODULE_DESCRIPTION("Driver for PCI OHCI IEEE1394 controllers");
+MODULE_LICENSE("GPL");
+
+/* Provide a module alias so root-on-sbp2 initrds don't break. */
+#ifndef CONFIG_IEEE1394_OHCI1394_MODULE
+MODULE_ALIAS("ohci1394");
+#endif
+
+static int __init fw_ohci_init(void)
+{
+ return pci_register_driver(&fw_ohci_pci_driver);
+}
+
+static void __exit fw_ohci_cleanup(void)
+{
+ pci_unregister_driver(&fw_ohci_pci_driver);
+}
+
+module_init(fw_ohci_init);
+module_exit(fw_ohci_cleanup);
diff --git a/drivers/firewire/fw-ohci.h b/drivers/firewire/fw-ohci.h
new file mode 100644
index 0000000..fa15706
--- /dev/null
+++ b/drivers/firewire/fw-ohci.h
@@ -0,0 +1,153 @@
+#ifndef __fw_ohci_h
+#define __fw_ohci_h
+
+/* OHCI register map */
+
+#define OHCI1394_Version 0x000
+#define OHCI1394_GUID_ROM 0x004
+#define OHCI1394_ATRetries 0x008
+#define OHCI1394_CSRData 0x00C
+#define OHCI1394_CSRCompareData 0x010
+#define OHCI1394_CSRControl 0x014
+#define OHCI1394_ConfigROMhdr 0x018
+#define OHCI1394_BusID 0x01C
+#define OHCI1394_BusOptions 0x020
+#define OHCI1394_GUIDHi 0x024
+#define OHCI1394_GUIDLo 0x028
+#define OHCI1394_ConfigROMmap 0x034
+#define OHCI1394_PostedWriteAddressLo 0x038
+#define OHCI1394_PostedWriteAddressHi 0x03C
+#define OHCI1394_VendorID 0x040
+#define OHCI1394_HCControlSet 0x050
+#define OHCI1394_HCControlClear 0x054
+#define OHCI1394_HCControl_BIBimageValid 0x80000000
+#define OHCI1394_HCControl_noByteSwapData 0x40000000
+#define OHCI1394_HCControl_programPhyEnable 0x00800000
+#define OHCI1394_HCControl_aPhyEnhanceEnable 0x00400000
+#define OHCI1394_HCControl_LPS 0x00080000
+#define OHCI1394_HCControl_postedWriteEnable 0x00040000
+#define OHCI1394_HCControl_linkEnable 0x00020000
+#define OHCI1394_HCControl_softReset 0x00010000
+#define OHCI1394_SelfIDBuffer 0x064
+#define OHCI1394_SelfIDCount 0x068
+#define OHCI1394_IRMultiChanMaskHiSet 0x070
+#define OHCI1394_IRMultiChanMaskHiClear 0x074
+#define OHCI1394_IRMultiChanMaskLoSet 0x078
+#define OHCI1394_IRMultiChanMaskLoClear 0x07C
+#define OHCI1394_IntEventSet 0x080
+#define OHCI1394_IntEventClear 0x084
+#define OHCI1394_IntMaskSet 0x088
+#define OHCI1394_IntMaskClear 0x08C
+#define OHCI1394_IsoXmitIntEventSet 0x090
+#define OHCI1394_IsoXmitIntEventClear 0x094
+#define OHCI1394_IsoXmitIntMaskSet 0x098
+#define OHCI1394_IsoXmitIntMaskClear 0x09C
+#define OHCI1394_IsoRecvIntEventSet 0x0A0
+#define OHCI1394_IsoRecvIntEventClear 0x0A4
+#define OHCI1394_IsoRecvIntMaskSet 0x0A8
+#define OHCI1394_IsoRecvIntMaskClear 0x0AC
+#define OHCI1394_InitialBandwidthAvailable 0x0B0
+#define OHCI1394_InitialChannelsAvailableHi 0x0B4
+#define OHCI1394_InitialChannelsAvailableLo 0x0B8
+#define OHCI1394_FairnessControl 0x0DC
+#define OHCI1394_LinkControlSet 0x0E0
+#define OHCI1394_LinkControlClear 0x0E4
+#define OHCI1394_LinkControl_rcvSelfID (1 << 9)
+#define OHCI1394_LinkControl_rcvPhyPkt (1 << 10)
+#define OHCI1394_LinkControl_cycleTimerEnable (1 << 20)
+#define OHCI1394_LinkControl_cycleMaster (1 << 21)
+#define OHCI1394_LinkControl_cycleSource (1 << 22)
+#define OHCI1394_NodeID 0x0E8
+#define OHCI1394_NodeID_idValid 0x80000000
+#define OHCI1394_PhyControl 0x0EC
+#define OHCI1394_PhyControl_Read(addr) (((addr) << 8) | 0x00008000)
+#define OHCI1394_PhyControl_ReadDone 0x80000000
+#define OHCI1394_PhyControl_ReadData(r) (((r) & 0x00ff0000) >> 16)
+#define OHCI1394_PhyControl_Write(addr, data) (((addr) << 8) | (data) | 0x00004000)
+#define OHCI1394_PhyControl_WriteDone 0x00004000
+#define OHCI1394_IsochronousCycleTimer 0x0F0
+#define OHCI1394_AsReqFilterHiSet 0x100
+#define OHCI1394_AsReqFilterHiClear 0x104
+#define OHCI1394_AsReqFilterLoSet 0x108
+#define OHCI1394_AsReqFilterLoClear 0x10C
+#define OHCI1394_PhyReqFilterHiSet 0x110
+#define OHCI1394_PhyReqFilterHiClear 0x114
+#define OHCI1394_PhyReqFilterLoSet 0x118
+#define OHCI1394_PhyReqFilterLoClear 0x11C
+#define OHCI1394_PhyUpperBound 0x120
+
+#define OHCI1394_AsReqTrContextBase 0x180
+#define OHCI1394_AsReqTrContextControlSet 0x180
+#define OHCI1394_AsReqTrContextControlClear 0x184
+#define OHCI1394_AsReqTrCommandPtr 0x18C
+
+#define OHCI1394_AsRspTrContextBase 0x1A0
+#define OHCI1394_AsRspTrContextControlSet 0x1A0
+#define OHCI1394_AsRspTrContextControlClear 0x1A4
+#define OHCI1394_AsRspTrCommandPtr 0x1AC
+
+#define OHCI1394_AsReqRcvContextBase 0x1C0
+#define OHCI1394_AsReqRcvContextControlSet 0x1C0
+#define OHCI1394_AsReqRcvContextControlClear 0x1C4
+#define OHCI1394_AsReqRcvCommandPtr 0x1CC
+
+#define OHCI1394_AsRspRcvContextBase 0x1E0
+#define OHCI1394_AsRspRcvContextControlSet 0x1E0
+#define OHCI1394_AsRspRcvContextControlClear 0x1E4
+#define OHCI1394_AsRspRcvCommandPtr 0x1EC
+
+/* Isochronous transmit registers */
+#define OHCI1394_IsoXmitContextBase(n) (0x200 + 16 * (n))
+#define OHCI1394_IsoXmitContextControlSet(n) (0x200 + 16 * (n))
+#define OHCI1394_IsoXmitContextControlClear(n) (0x204 + 16 * (n))
+#define OHCI1394_IsoXmitCommandPtr(n) (0x20C + 16 * (n))
+
+/* Isochronous receive registers */
+#define OHCI1394_IsoRcvContextBase(n) (0x400 + 32 * (n))
+#define OHCI1394_IsoRcvContextControlSet(n) (0x400 + 32 * (n))
+#define OHCI1394_IsoRcvContextControlClear(n) (0x404 + 32 * (n))
+#define OHCI1394_IsoRcvCommandPtr(n) (0x40C + 32 * (n))
+#define OHCI1394_IsoRcvContextMatch(n) (0x410 + 32 * (n))
+
+/* Interrupts Mask/Events */
+#define OHCI1394_reqTxComplete 0x00000001
+#define OHCI1394_respTxComplete 0x00000002
+#define OHCI1394_ARRQ 0x00000004
+#define OHCI1394_ARRS 0x00000008
+#define OHCI1394_RQPkt 0x00000010
+#define OHCI1394_RSPkt 0x00000020
+#define OHCI1394_isochTx 0x00000040
+#define OHCI1394_isochRx 0x00000080
+#define OHCI1394_postedWriteErr 0x00000100
+#define OHCI1394_lockRespErr 0x00000200
+#define OHCI1394_selfIDComplete 0x00010000
+#define OHCI1394_busReset 0x00020000
+#define OHCI1394_phy 0x00080000
+#define OHCI1394_cycleSynch 0x00100000
+#define OHCI1394_cycle64Seconds 0x00200000
+#define OHCI1394_cycleLost 0x00400000
+#define OHCI1394_cycleInconsistent 0x00800000
+#define OHCI1394_unrecoverableError 0x01000000
+#define OHCI1394_cycleTooLong 0x02000000
+#define OHCI1394_phyRegRcvd 0x04000000
+#define OHCI1394_masterIntEnable 0x80000000
+
+#define OHCI1394_evt_no_status 0x0
+#define OHCI1394_evt_long_packet 0x2
+#define OHCI1394_evt_missing_ack 0x3
+#define OHCI1394_evt_underrun 0x4
+#define OHCI1394_evt_overrun 0x5
+#define OHCI1394_evt_descriptor_read 0x6
+#define OHCI1394_evt_data_read 0x7
+#define OHCI1394_evt_data_write 0x8
+#define OHCI1394_evt_bus_reset 0x9
+#define OHCI1394_evt_timeout 0xa
+#define OHCI1394_evt_tcode_err 0xb
+#define OHCI1394_evt_reserved_b 0xc
+#define OHCI1394_evt_reserved_c 0xd
+#define OHCI1394_evt_unknown 0xe
+#define OHCI1394_evt_flushed 0xf
+
+#define OHCI1394_phy_tcode 0xe
+
+#endif /* __fw_ohci_h */
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
new file mode 100644
index 0000000..6830041
--- /dev/null
+++ b/drivers/firewire/fw-sbp2.c
@@ -0,0 +1,1147 @@
+/*
+ * SBP2 driver (SCSI over IEEE1394)
+ *
+ * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * The basic structure of this driver is based on the old storage driver,
+ * drivers/ieee1394/sbp2.c, originally written by
+ * James Goodwin <jamesg@filanet.com>
+ * with later contributions and ongoing maintenance from
+ * Ben Collins <bcollins@debian.org>,
+ * Stefan Richter <stefanr@s5r6.in-berlin.de>
+ * and many others.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/timer.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "fw-transaction.h"
+#include "fw-topology.h"
+#include "fw-device.h"
+
+/* I don't know why the SCSI stack doesn't define something like this... */
+typedef void (*scsi_done_fn_t)(struct scsi_cmnd *);
+
+static const char sbp2_driver_name[] = "sbp2";
+
+struct sbp2_device {
+ struct kref kref;
+ struct fw_unit *unit;
+ struct fw_address_handler address_handler;
+ struct list_head orb_list;
+ u64 management_agent_address;
+ u64 command_block_agent_address;
+ u32 workarounds;
+ int login_id;
+
+ /*
+ * We cache these addresses and only update them once we've
+ * logged in or reconnected to the sbp2 device. That way, any
+ * IO to the device will automatically fail and get retried if
+ * it happens in a window where the device is not ready to
+ * handle it (e.g. after a bus reset but before we reconnect).
+ */
+ int node_id;
+ int address_high;
+ int generation;
+
+ int retries;
+ struct delayed_work work;
+};
+
+#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
+#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
+#define SBP2_ORB_TIMEOUT 2000 /* Timeout in ms */
+
+#define SBP2_ORB_NULL 0x80000000
+
+#define SBP2_DIRECTION_TO_MEDIA 0x0
+#define SBP2_DIRECTION_FROM_MEDIA 0x1
+
+/* Unit directory keys */
+#define SBP2_COMMAND_SET_SPECIFIER 0x38
+#define SBP2_COMMAND_SET 0x39
+#define SBP2_COMMAND_SET_REVISION 0x3b
+#define SBP2_FIRMWARE_REVISION 0x3c
+
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
+#define SBP2_WORKAROUND_INQUIRY_36 0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
+#define SBP2_WORKAROUND_OVERRIDE 0x100
+
+/* Management orb opcodes */
+#define SBP2_LOGIN_REQUEST 0x0
+#define SBP2_QUERY_LOGINS_REQUEST 0x1
+#define SBP2_RECONNECT_REQUEST 0x3
+#define SBP2_SET_PASSWORD_REQUEST 0x4
+#define SBP2_LOGOUT_REQUEST 0x7
+#define SBP2_ABORT_TASK_REQUEST 0xb
+#define SBP2_ABORT_TASK_SET 0xc
+#define SBP2_LOGICAL_UNIT_RESET 0xe
+#define SBP2_TARGET_RESET_REQUEST 0xf
+
+/* Offsets for command block agent registers */
+#define SBP2_AGENT_STATE 0x00
+#define SBP2_AGENT_RESET 0x04
+#define SBP2_ORB_POINTER 0x08
+#define SBP2_DOORBELL 0x10
+#define SBP2_UNSOLICITED_STATUS_ENABLE 0x14
+
+/* Status write response codes */
+#define SBP2_STATUS_REQUEST_COMPLETE 0x0
+#define SBP2_STATUS_TRANSPORT_FAILURE 0x1
+#define SBP2_STATUS_ILLEGAL_REQUEST 0x2
+#define SBP2_STATUS_VENDOR_DEPENDENT 0x3
+
+#define STATUS_GET_ORB_HIGH(v) ((v).status & 0xffff)
+#define STATUS_GET_SBP_STATUS(v) (((v).status >> 16) & 0xff)
+#define STATUS_GET_LEN(v) (((v).status >> 24) & 0x07)
+#define STATUS_GET_DEAD(v) (((v).status >> 27) & 0x01)
+#define STATUS_GET_RESPONSE(v) (((v).status >> 28) & 0x03)
+#define STATUS_GET_SOURCE(v) (((v).status >> 30) & 0x03)
+#define STATUS_GET_ORB_LOW(v) ((v).orb_low)
+#define STATUS_GET_DATA(v) ((v).data)
+
+struct sbp2_status {
+ u32 status;
+ u32 orb_low;
+ u8 data[24];
+};
+
+struct sbp2_pointer {
+ u32 high;
+ u32 low;
+};
+
+struct sbp2_orb {
+ struct fw_transaction t;
+ dma_addr_t request_bus;
+ int rcode;
+ struct sbp2_pointer pointer;
+ void (*callback)(struct sbp2_orb * orb, struct sbp2_status * status);
+ struct list_head link;
+};
+
+#define MANAGEMENT_ORB_LUN(v) ((v))
+#define MANAGEMENT_ORB_FUNCTION(v) ((v) << 16)
+#define MANAGEMENT_ORB_RECONNECT(v) ((v) << 20)
+#define MANAGEMENT_ORB_EXCLUSIVE ((1) << 28)
+#define MANAGEMENT_ORB_REQUEST_FORMAT(v) ((v) << 29)
+#define MANAGEMENT_ORB_NOTIFY ((1) << 31)
+
+#define MANAGEMENT_ORB_RESPONSE_LENGTH(v) ((v))
+#define MANAGEMENT_ORB_PASSWORD_LENGTH(v) ((v) << 16)
+
+struct sbp2_management_orb {
+ struct sbp2_orb base;
+ struct {
+ struct sbp2_pointer password;
+ struct sbp2_pointer response;
+ u32 misc;
+ u32 length;
+ struct sbp2_pointer status_fifo;
+ } request;
+ __be32 response[4];
+ dma_addr_t response_bus;
+ struct completion done;
+ struct sbp2_status status;
+};
+
+#define LOGIN_RESPONSE_GET_LOGIN_ID(v) ((v).misc & 0xffff)
+#define LOGIN_RESPONSE_GET_LENGTH(v) (((v).misc >> 16) & 0xffff)
+
+struct sbp2_login_response {
+ u32 misc;
+ struct sbp2_pointer command_block_agent;
+ u32 reconnect_hold;
+};
+#define COMMAND_ORB_DATA_SIZE(v) ((v))
+#define COMMAND_ORB_PAGE_SIZE(v) ((v) << 16)
+#define COMMAND_ORB_PAGE_TABLE_PRESENT ((1) << 19)
+#define COMMAND_ORB_MAX_PAYLOAD(v) ((v) << 20)
+#define COMMAND_ORB_SPEED(v) ((v) << 24)
+#define COMMAND_ORB_DIRECTION(v) ((v) << 27)
+#define COMMAND_ORB_REQUEST_FORMAT(v) ((v) << 29)
+#define COMMAND_ORB_NOTIFY ((1) << 31)
+
+struct sbp2_command_orb {
+ struct sbp2_orb base;
+ struct {
+ struct sbp2_pointer next;
+ struct sbp2_pointer data_descriptor;
+ u32 misc;
+ u8 command_block[12];
+ } request;
+ struct scsi_cmnd *cmd;
+ scsi_done_fn_t done;
+ struct fw_unit *unit;
+
+ struct sbp2_pointer page_table[SG_ALL];
+ dma_addr_t page_table_bus;
+ dma_addr_t request_buffer_bus;
+};
+
+/*
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best
+ * indicator for the type of bridge chip of a device. It yields a few
+ * false positives but this did not break correctly behaving devices
+ * so far. We use ~0 as a wildcard, since the 24 bit values we get
+ * from the config rom can never match that.
+ */
+static const struct {
+ u32 firmware_revision;
+ u32 model;
+ unsigned workarounds;
+} sbp2_workarounds_table[] = {
+ /* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
+ .firmware_revision = 0x002800,
+ .model = 0x001010,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36 |
+ SBP2_WORKAROUND_MODE_SENSE_8,
+ },
+ /* Initio bridges, actually only needed for some older ones */ {
+ .firmware_revision = 0x000200,
+ .model = ~0,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36,
+ },
+ /* Symbios bridge */ {
+ .firmware_revision = 0xa0b800,
+ .model = ~0,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ },
+
+ /*
+ * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
+ * these iPods do not feature the read_capacity bug according
+ * to one report. Read_capacity behaviour as well as model_id
+ * could change due to Apple-supplied firmware updates though.
+ */
+
+ /* iPod 4th generation. */ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000021,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000023,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod Photo */ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x00007e,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ }
+};
+
+static void
+sbp2_status_write(struct fw_card *card, struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *payload, size_t length, void *callback_data)
+{
+ struct sbp2_device *sd = callback_data;
+ struct sbp2_orb *orb;
+ struct sbp2_status status;
+ size_t header_size;
+ unsigned long flags;
+
+ if (tcode != TCODE_WRITE_BLOCK_REQUEST ||
+ length == 0 || length > sizeof(status)) {
+ fw_send_response(card, request, RCODE_TYPE_ERROR);
+ return;
+ }
+
+ header_size = min(length, 2 * sizeof(u32));
+ fw_memcpy_from_be32(&status, payload, header_size);
+ if (length > header_size)
+ memcpy(status.data, payload + 8, length - header_size);
+ if (STATUS_GET_SOURCE(status) == 2 || STATUS_GET_SOURCE(status) == 3) {
+ fw_notify("non-orb related status write, not handled\n");
+ fw_send_response(card, request, RCODE_COMPLETE);
+ return;
+ }
+
+ /* Lookup the orb corresponding to this status write. */
+ spin_lock_irqsave(&card->lock, flags);
+ list_for_each_entry(orb, &sd->orb_list, link) {
+ if (STATUS_GET_ORB_HIGH(status) == 0 &&
+ STATUS_GET_ORB_LOW(status) == orb->request_bus &&
+ orb->rcode == RCODE_COMPLETE) {
+ list_del(&orb->link);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (&orb->link != &sd->orb_list)
+ orb->callback(orb, &status);
+ else
+ fw_error("status write for unknown orb\n");
+
+ fw_send_response(card, request, RCODE_COMPLETE);
+}
+
+static void
+complete_transaction(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
+{
+ struct sbp2_orb *orb = data;
+ unsigned long flags;
+
+ orb->rcode = rcode;
+ if (rcode != RCODE_COMPLETE) {
+ spin_lock_irqsave(&card->lock, flags);
+ list_del(&orb->link);
+ spin_unlock_irqrestore(&card->lock, flags);
+ orb->callback(orb, NULL);
+ }
+}
+
+static void
+sbp2_send_orb(struct sbp2_orb *orb, struct fw_unit *unit,
+ int node_id, int generation, u64 offset)
+{
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_device *sd = unit->device.driver_data;
+ unsigned long flags;
+
+ orb->pointer.high = 0;
+ orb->pointer.low = orb->request_bus;
+ fw_memcpy_to_be32(&orb->pointer, &orb->pointer, sizeof(orb->pointer));
+
+ spin_lock_irqsave(&device->card->lock, flags);
+ list_add_tail(&orb->link, &sd->orb_list);
+ spin_unlock_irqrestore(&device->card->lock, flags);
+
+ fw_send_request(device->card, &orb->t, TCODE_WRITE_BLOCK_REQUEST,
+ node_id, generation,
+ device->node->max_speed, offset,
+ &orb->pointer, sizeof(orb->pointer),
+ complete_transaction, orb);
+}
+
+static int sbp2_cancel_orbs(struct fw_unit *unit)
+{
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_device *sd = unit->device.driver_data;
+ struct sbp2_orb *orb, *next;
+ struct list_head list;
+ unsigned long flags;
+ int retval = -ENOENT;
+
+ INIT_LIST_HEAD(&list);
+ spin_lock_irqsave(&device->card->lock, flags);
+ list_splice_init(&sd->orb_list, &list);
+ spin_unlock_irqrestore(&device->card->lock, flags);
+
+ list_for_each_entry_safe(orb, next, &list, link) {
+ retval = 0;
+ if (fw_cancel_transaction(device->card, &orb->t) == 0)
+ continue;
+
+ orb->rcode = RCODE_CANCELLED;
+ orb->callback(orb, NULL);
+ }
+
+ return retval;
+}
+
+static void
+complete_management_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
+{
+ struct sbp2_management_orb *orb =
+ (struct sbp2_management_orb *)base_orb;
+
+ if (status)
+ memcpy(&orb->status, status, sizeof(*status));
+ complete(&orb->done);
+}
+
+static int
+sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
+ int function, int lun, void *response)
+{
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_device *sd = unit->device.driver_data;
+ struct sbp2_management_orb *orb;
+ int retval = -ENOMEM;
+
+ orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
+ if (orb == NULL)
+ return -ENOMEM;
+
+ /*
+ * The sbp2 device is going to send a block read request to
+ * read out the request from host memory, so map it for dma.
+ */
+ orb->base.request_bus =
+ dma_map_single(device->card->device, &orb->request,
+ sizeof(orb->request), DMA_TO_DEVICE);
+ if (dma_mapping_error(orb->base.request_bus))
+ goto out;
+
+ orb->response_bus =
+ dma_map_single(device->card->device, &orb->response,
+ sizeof(orb->response), DMA_FROM_DEVICE);
+ if (dma_mapping_error(orb->response_bus))
+ goto out;
+
+ orb->request.response.high = 0;
+ orb->request.response.low = orb->response_bus;
+
+ orb->request.misc =
+ MANAGEMENT_ORB_NOTIFY |
+ MANAGEMENT_ORB_FUNCTION(function) |
+ MANAGEMENT_ORB_LUN(lun);
+ orb->request.length =
+ MANAGEMENT_ORB_RESPONSE_LENGTH(sizeof(orb->response));
+
+ orb->request.status_fifo.high = sd->address_handler.offset >> 32;
+ orb->request.status_fifo.low = sd->address_handler.offset;
+
+ /*
+ * FIXME: Yeah, ok this isn't elegant, we hardwire exclusive
+ * login and 1 second reconnect time. The reconnect setting
+ * is probably fine, but the exclusive login should be an option.
+ */
+ if (function == SBP2_LOGIN_REQUEST) {
+ orb->request.misc |=
+ MANAGEMENT_ORB_EXCLUSIVE |
+ MANAGEMENT_ORB_RECONNECT(0);
+ }
+
+ fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
+
+ init_completion(&orb->done);
+ orb->base.callback = complete_management_orb;
+
+ sbp2_send_orb(&orb->base, unit,
+ node_id, generation, sd->management_agent_address);
+
+ wait_for_completion_timeout(&orb->done,
+ msecs_to_jiffies(SBP2_ORB_TIMEOUT));
+
+ retval = -EIO;
+ if (sbp2_cancel_orbs(unit) == 0) {
+ fw_error("orb reply timed out, rcode=0x%02x\n",
+ orb->base.rcode);
+ goto out;
+ }
+
+ if (orb->base.rcode != RCODE_COMPLETE) {
+ fw_error("management write failed, rcode 0x%02x\n",
+ orb->base.rcode);
+ goto out;
+ }
+
+ if (STATUS_GET_RESPONSE(orb->status) != 0 ||
+ STATUS_GET_SBP_STATUS(orb->status) != 0) {
+ fw_error("error status: %d:%d\n",
+ STATUS_GET_RESPONSE(orb->status),
+ STATUS_GET_SBP_STATUS(orb->status));
+ goto out;
+ }
+
+ retval = 0;
+ out:
+ dma_unmap_single(device->card->device, orb->base.request_bus,
+ sizeof(orb->request), DMA_TO_DEVICE);
+ dma_unmap_single(device->card->device, orb->response_bus,
+ sizeof(orb->response), DMA_FROM_DEVICE);
+
+ if (response)
+ fw_memcpy_from_be32(response,
+ orb->response, sizeof(orb->response));
+ kfree(orb);
+
+ return retval;
+}
+
+static void
+complete_agent_reset_write(struct fw_card *card, int rcode,
+ void *payload, size_t length, void *data)
+{
+ struct fw_transaction *t = data;
+
+ kfree(t);
+}
+
+static int sbp2_agent_reset(struct fw_unit *unit)
+{
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_device *sd = unit->device.driver_data;
+ struct fw_transaction *t;
+ static u32 zero;
+
+ t = kzalloc(sizeof(*t), GFP_ATOMIC);
+ if (t == NULL)
+ return -ENOMEM;
+
+ fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
+ sd->node_id, sd->generation, SCODE_400,
+ sd->command_block_agent_address + SBP2_AGENT_RESET,
+ &zero, sizeof(zero), complete_agent_reset_write, t);
+
+ return 0;
+}
+
+static void sbp2_reconnect(struct work_struct *work);
+static struct scsi_host_template scsi_driver_template;
+
+static void
+release_sbp2_device(struct kref *kref)
+{
+ struct sbp2_device *sd = container_of(kref, struct sbp2_device, kref);
+ struct Scsi_Host *host =
+ container_of((void *)sd, struct Scsi_Host, hostdata[0]);
+
+ sbp2_send_management_orb(sd->unit, sd->node_id, sd->generation,
+ SBP2_LOGOUT_REQUEST, sd->login_id, NULL);
+
+ scsi_remove_host(host);
+ fw_core_remove_address_handler(&sd->address_handler);
+ fw_notify("removed sbp2 unit %s\n", sd->unit->device.bus_id);
+ put_device(&sd->unit->device);
+ scsi_host_put(host);
+}
+
+static void sbp2_login(struct work_struct *work)
+{
+ struct sbp2_device *sd =
+ container_of(work, struct sbp2_device, work.work);
+ struct Scsi_Host *host =
+ container_of((void *)sd, struct Scsi_Host, hostdata[0]);
+ struct fw_unit *unit = sd->unit;
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_login_response response;
+ int generation, node_id, local_node_id, lun, retval;
+
+ /* FIXME: Make this work for multi-lun devices. */
+ lun = 0;
+
+ generation = device->card->generation;
+ node_id = device->node->node_id;
+ local_node_id = device->card->local_node->node_id;
+
+ if (sbp2_send_management_orb(unit, node_id, generation,
+ SBP2_LOGIN_REQUEST, lun, &response) < 0) {
+ if (sd->retries++ < 5) {
+ schedule_delayed_work(&sd->work, DIV_ROUND_UP(HZ, 5));
+ } else {
+ fw_error("failed to login to %s\n",
+ unit->device.bus_id);
+ kref_put(&sd->kref, release_sbp2_device);
+ }
+ return;
+ }
+
+ sd->generation = generation;
+ sd->node_id = node_id;
+ sd->address_high = local_node_id << 16;
+
+ /* Get command block agent offset and login id. */
+ sd->command_block_agent_address =
+ ((u64) (response.command_block_agent.high & 0xffff) << 32) |
+ response.command_block_agent.low;
+ sd->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
+
+ fw_notify("logged in to sbp2 unit %s (%d retries)\n",
+ unit->device.bus_id, sd->retries);
+ fw_notify(" - management_agent_address: 0x%012llx\n",
+ (unsigned long long) sd->management_agent_address);
+ fw_notify(" - command_block_agent_address: 0x%012llx\n",
+ (unsigned long long) sd->command_block_agent_address);
+ fw_notify(" - status write address: 0x%012llx\n",
+ (unsigned long long) sd->address_handler.offset);
+
+#if 0
+ /* FIXME: The linux1394 sbp2 does this last step. */
+ sbp2_set_busy_timeout(scsi_id);
+#endif
+
+ PREPARE_DELAYED_WORK(&sd->work, sbp2_reconnect);
+ sbp2_agent_reset(unit);
+
+ /* FIXME: Loop over luns here. */
+ lun = 0;
+ retval = scsi_add_device(host, 0, 0, lun);
+ if (retval < 0) {
+ sbp2_send_management_orb(unit, sd->node_id, sd->generation,
+ SBP2_LOGOUT_REQUEST, sd->login_id,
+ NULL);
+ /*
+ * Set this back to sbp2_login so we fall back and
+ * retry login on bus reset.
+ */
+ PREPARE_DELAYED_WORK(&sd->work, sbp2_login);
+ }
+ kref_put(&sd->kref, release_sbp2_device);
+}
+
+static int sbp2_probe(struct device *dev)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_device *sd;
+ struct fw_csr_iterator ci;
+ struct Scsi_Host *host;
+ int i, key, value, err;
+ u32 model, firmware_revision;
+
+ err = -ENOMEM;
+ host = scsi_host_alloc(&scsi_driver_template, sizeof(*sd));
+ if (host == NULL)
+ goto fail;
+
+ sd = (struct sbp2_device *) host->hostdata;
+ unit->device.driver_data = sd;
+ sd->unit = unit;
+ INIT_LIST_HEAD(&sd->orb_list);
+ kref_init(&sd->kref);
+
+ sd->address_handler.length = 0x100;
+ sd->address_handler.address_callback = sbp2_status_write;
+ sd->address_handler.callback_data = sd;
+
+ err = fw_core_add_address_handler(&sd->address_handler,
+ &fw_high_memory_region);
+ if (err < 0)
+ goto fail_host;
+
+ err = fw_device_enable_phys_dma(device);
+ if (err < 0)
+ goto fail_address_handler;
+
+ err = scsi_add_host(host, &unit->device);
+ if (err < 0)
+ goto fail_address_handler;
+
+ /*
+ * Scan unit directory to get management agent address,
+ * firmware revison and model. Initialize firmware_revision
+ * and model to values that wont match anything in our table.
+ */
+ firmware_revision = 0xff000000;
+ model = 0xff000000;
+ fw_csr_iterator_init(&ci, unit->directory);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ switch (key) {
+ case CSR_DEPENDENT_INFO | CSR_OFFSET:
+ sd->management_agent_address =
+ 0xfffff0000000ULL + 4 * value;
+ break;
+ case SBP2_FIRMWARE_REVISION:
+ firmware_revision = value;
+ break;
+ case CSR_MODEL:
+ model = value;
+ break;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+ if (sbp2_workarounds_table[i].firmware_revision !=
+ (firmware_revision & 0xffffff00))
+ continue;
+ if (sbp2_workarounds_table[i].model != model &&
+ sbp2_workarounds_table[i].model != ~0)
+ continue;
+ sd->workarounds |= sbp2_workarounds_table[i].workarounds;
+ break;
+ }
+
+ if (sd->workarounds)
+ fw_notify("Workarounds for node %s: 0x%x "
+ "(firmware_revision 0x%06x, model_id 0x%06x)\n",
+ unit->device.bus_id,
+ sd->workarounds, firmware_revision, model);
+
+ get_device(&unit->device);
+
+ /*
+ * We schedule work to do the login so we can easily
+ * reschedule retries. Always get the ref before scheduling
+ * work.
+ */
+ INIT_DELAYED_WORK(&sd->work, sbp2_login);
+ if (schedule_delayed_work(&sd->work, 0))
+ kref_get(&sd->kref);
+
+ return 0;
+
+ fail_address_handler:
+ fw_core_remove_address_handler(&sd->address_handler);
+ fail_host:
+ scsi_host_put(host);
+ fail:
+ return err;
+}
+
+static int sbp2_remove(struct device *dev)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct sbp2_device *sd = unit->device.driver_data;
+
+ kref_put(&sd->kref, release_sbp2_device);
+
+ return 0;
+}
+
+static void sbp2_reconnect(struct work_struct *work)
+{
+ struct sbp2_device *sd =
+ container_of(work, struct sbp2_device, work.work);
+ struct fw_unit *unit = sd->unit;
+ struct fw_device *device = fw_device(unit->device.parent);
+ int generation, node_id, local_node_id;
+
+ generation = device->card->generation;
+ node_id = device->node->node_id;
+ local_node_id = device->card->local_node->node_id;
+
+ if (sbp2_send_management_orb(unit, node_id, generation,
+ SBP2_RECONNECT_REQUEST,
+ sd->login_id, NULL) < 0) {
+ if (sd->retries++ >= 5) {
+ fw_error("failed to reconnect to %s\n",
+ unit->device.bus_id);
+ /* Fall back and try to log in again. */
+ sd->retries = 0;
+ PREPARE_DELAYED_WORK(&sd->work, sbp2_login);
+ }
+ schedule_delayed_work(&sd->work, DIV_ROUND_UP(HZ, 5));
+ return;
+ }
+
+ sd->generation = generation;
+ sd->node_id = node_id;
+ sd->address_high = local_node_id << 16;
+
+ fw_notify("reconnected to unit %s (%d retries)\n",
+ unit->device.bus_id, sd->retries);
+ sbp2_agent_reset(unit);
+ sbp2_cancel_orbs(unit);
+ kref_put(&sd->kref, release_sbp2_device);
+}
+
+static void sbp2_update(struct fw_unit *unit)
+{
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_device *sd = unit->device.driver_data;
+
+ sd->retries = 0;
+ fw_device_enable_phys_dma(device);
+ if (schedule_delayed_work(&sd->work, 0))
+ kref_get(&sd->kref);
+}
+
+#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
+#define SBP2_SW_VERSION_ENTRY 0x00010483
+
+static const struct fw_device_id sbp2_id_table[] = {
+ {
+ .match_flags = FW_MATCH_SPECIFIER_ID | FW_MATCH_VERSION,
+ .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY,
+ .version = SBP2_SW_VERSION_ENTRY,
+ },
+ { }
+};
+
+static struct fw_driver sbp2_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = sbp2_driver_name,
+ .bus = &fw_bus_type,
+ .probe = sbp2_probe,
+ .remove = sbp2_remove,
+ },
+ .update = sbp2_update,
+ .id_table = sbp2_id_table,
+};
+
+static unsigned int
+sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
+{
+ int sam_status;
+
+ sense_data[0] = 0x70;
+ sense_data[1] = 0x0;
+ sense_data[2] = sbp2_status[1];
+ sense_data[3] = sbp2_status[4];
+ sense_data[4] = sbp2_status[5];
+ sense_data[5] = sbp2_status[6];
+ sense_data[6] = sbp2_status[7];
+ sense_data[7] = 10;
+ sense_data[8] = sbp2_status[8];
+ sense_data[9] = sbp2_status[9];
+ sense_data[10] = sbp2_status[10];
+ sense_data[11] = sbp2_status[11];
+ sense_data[12] = sbp2_status[2];
+ sense_data[13] = sbp2_status[3];
+ sense_data[14] = sbp2_status[12];
+ sense_data[15] = sbp2_status[13];
+
+ sam_status = sbp2_status[0] & 0x3f;
+
+ switch (sam_status) {
+ case SAM_STAT_GOOD:
+ case SAM_STAT_CHECK_CONDITION:
+ case SAM_STAT_CONDITION_MET:
+ case SAM_STAT_BUSY:
+ case SAM_STAT_RESERVATION_CONFLICT:
+ case SAM_STAT_COMMAND_TERMINATED:
+ return DID_OK << 16 | sam_status;
+
+ default:
+ return DID_ERROR << 16;
+ }
+}
+
+static void
+complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
+{
+ struct sbp2_command_orb *orb = (struct sbp2_command_orb *)base_orb;
+ struct fw_unit *unit = orb->unit;
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct scatterlist *sg;
+ int result;
+
+ if (status != NULL) {
+ if (STATUS_GET_DEAD(*status))
+ sbp2_agent_reset(unit);
+
+ switch (STATUS_GET_RESPONSE(*status)) {
+ case SBP2_STATUS_REQUEST_COMPLETE:
+ result = DID_OK << 16;
+ break;
+ case SBP2_STATUS_TRANSPORT_FAILURE:
+ result = DID_BUS_BUSY << 16;
+ break;
+ case SBP2_STATUS_ILLEGAL_REQUEST:
+ case SBP2_STATUS_VENDOR_DEPENDENT:
+ default:
+ result = DID_ERROR << 16;
+ break;
+ }
+
+ if (result == DID_OK << 16 && STATUS_GET_LEN(*status) > 1)
+ result = sbp2_status_to_sense_data(STATUS_GET_DATA(*status),
+ orb->cmd->sense_buffer);
+ } else {
+ /*
+ * If the orb completes with status == NULL, something
+ * went wrong, typically a bus reset happened mid-orb
+ * or when sending the write (less likely).
+ */
+ result = DID_BUS_BUSY << 16;
+ }
+
+ dma_unmap_single(device->card->device, orb->base.request_bus,
+ sizeof(orb->request), DMA_TO_DEVICE);
+
+ if (orb->cmd->use_sg > 0) {
+ sg = (struct scatterlist *)orb->cmd->request_buffer;
+ dma_unmap_sg(device->card->device, sg, orb->cmd->use_sg,
+ orb->cmd->sc_data_direction);
+ }
+
+ if (orb->page_table_bus != 0)
+ dma_unmap_single(device->card->device, orb->page_table_bus,
+ sizeof(orb->page_table_bus), DMA_TO_DEVICE);
+
+ if (orb->request_buffer_bus != 0)
+ dma_unmap_single(device->card->device, orb->request_buffer_bus,
+ sizeof(orb->request_buffer_bus),
+ DMA_FROM_DEVICE);
+
+ orb->cmd->result = result;
+ orb->done(orb->cmd);
+ kfree(orb);
+}
+
+static int sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
+{
+ struct sbp2_device *sd =
+ (struct sbp2_device *)orb->cmd->device->host->hostdata;
+ struct fw_unit *unit = sd->unit;
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct scatterlist *sg;
+ int sg_len, l, i, j, count;
+ size_t size;
+ dma_addr_t sg_addr;
+
+ sg = (struct scatterlist *)orb->cmd->request_buffer;
+ count = dma_map_sg(device->card->device, sg, orb->cmd->use_sg,
+ orb->cmd->sc_data_direction);
+ if (count == 0)
+ goto fail;
+
+ /*
+ * Handle the special case where there is only one element in
+ * the scatter list by converting it to an immediate block
+ * request. This is also a workaround for broken devices such
+ * as the second generation iPod which doesn't support page
+ * tables.
+ */
+ if (count == 1 && sg_dma_len(sg) < SBP2_MAX_SG_ELEMENT_LENGTH) {
+ orb->request.data_descriptor.high = sd->address_high;
+ orb->request.data_descriptor.low = sg_dma_address(sg);
+ orb->request.misc |=
+ COMMAND_ORB_DATA_SIZE(sg_dma_len(sg));
+ return 0;
+ }
+
+ /*
+ * Convert the scatterlist to an sbp2 page table. If any
+ * scatterlist entries are too big for sbp2, we split them as we
+ * go. Even if we ask the block I/O layer to not give us sg
+ * elements larger than 65535 bytes, some IOMMUs may merge sg elements
+ * during DMA mapping, and Linux currently doesn't prevent this.
+ */
+ for (i = 0, j = 0; i < count; i++) {
+ sg_len = sg_dma_len(sg + i);
+ sg_addr = sg_dma_address(sg + i);
+ while (sg_len) {
+ l = min(sg_len, SBP2_MAX_SG_ELEMENT_LENGTH);
+ orb->page_table[j].low = sg_addr;
+ orb->page_table[j].high = (l << 16);
+ sg_addr += l;
+ sg_len -= l;
+ j++;
+ }
+ }
+
+ size = sizeof(orb->page_table[0]) * j;
+
+ /*
+ * The data_descriptor pointer is the one case where we need
+ * to fill in the node ID part of the address. All other
+ * pointers assume that the data referenced reside on the
+ * initiator (i.e. us), but data_descriptor can refer to data
+ * on other nodes so we need to put our ID in descriptor.high.
+ */
+
+ orb->page_table_bus =
+ dma_map_single(device->card->device, orb->page_table,
+ size, DMA_TO_DEVICE);
+ if (dma_mapping_error(orb->page_table_bus))
+ goto fail_page_table;
+ orb->request.data_descriptor.high = sd->address_high;
+ orb->request.data_descriptor.low = orb->page_table_bus;
+ orb->request.misc |=
+ COMMAND_ORB_PAGE_TABLE_PRESENT |
+ COMMAND_ORB_DATA_SIZE(j);
+
+ fw_memcpy_to_be32(orb->page_table, orb->page_table, size);
+
+ return 0;
+
+ fail_page_table:
+ dma_unmap_sg(device->card->device, sg, orb->cmd->use_sg,
+ orb->cmd->sc_data_direction);
+ fail:
+ return -ENOMEM;
+}
+
+/* SCSI stack integration */
+
+static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
+{
+ struct sbp2_device *sd =
+ (struct sbp2_device *)cmd->device->host->hostdata;
+ struct fw_unit *unit = sd->unit;
+ struct fw_device *device = fw_device(unit->device.parent);
+ struct sbp2_command_orb *orb;
+
+ /*
+ * Bidirectional commands are not yet implemented, and unknown
+ * transfer direction not handled.
+ */
+ if (cmd->sc_data_direction == DMA_BIDIRECTIONAL) {
+ fw_error("Cannot handle DMA_BIDIRECTIONAL - rejecting command");
+ cmd->result = DID_ERROR << 16;
+ done(cmd);
+ return 0;
+ }
+
+ orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
+ if (orb == NULL) {
+ fw_notify("failed to alloc orb\n");
+ goto fail_alloc;
+ }
+
+ /* Initialize rcode to something not RCODE_COMPLETE. */
+ orb->base.rcode = -1;
+ orb->base.request_bus =
+ dma_map_single(device->card->device, &orb->request,
+ sizeof(orb->request), DMA_TO_DEVICE);
+ if (dma_mapping_error(orb->base.request_bus))
+ goto fail_mapping;
+
+ orb->unit = unit;
+ orb->done = done;
+ orb->cmd = cmd;
+
+ orb->request.next.high = SBP2_ORB_NULL;
+ orb->request.next.low = 0x0;
+ /*
+ * At speed 100 we can do 512 bytes per packet, at speed 200,
+ * 1024 bytes per packet etc. The SBP-2 max_payload field
+ * specifies the max payload size as 2 ^ (max_payload + 2), so
+ * if we set this to max_speed + 7, we get the right value.
+ */
+ orb->request.misc =
+ COMMAND_ORB_MAX_PAYLOAD(device->node->max_speed + 7) |
+ COMMAND_ORB_SPEED(device->node->max_speed) |
+ COMMAND_ORB_NOTIFY;
+
+ if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ orb->request.misc |=
+ COMMAND_ORB_DIRECTION(SBP2_DIRECTION_FROM_MEDIA);
+ else if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ orb->request.misc |=
+ COMMAND_ORB_DIRECTION(SBP2_DIRECTION_TO_MEDIA);
+
+ if (cmd->use_sg && sbp2_command_orb_map_scatterlist(orb) < 0)
+ goto fail_map_payload;
+
+ fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
+
+ memset(orb->request.command_block,
+ 0, sizeof(orb->request.command_block));
+ memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
+
+ orb->base.callback = complete_command_orb;
+
+ sbp2_send_orb(&orb->base, unit, sd->node_id, sd->generation,
+ sd->command_block_agent_address + SBP2_ORB_POINTER);
+
+ return 0;
+
+ fail_map_payload:
+ dma_unmap_single(device->card->device, orb->base.request_bus,
+ sizeof(orb->request), DMA_TO_DEVICE);
+ fail_mapping:
+ kfree(orb);
+ fail_alloc:
+ return SCSI_MLQUEUE_HOST_BUSY;
+}
+
+static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
+{
+ struct sbp2_device *sd = (struct sbp2_device *)sdev->host->hostdata;
+
+ sdev->allow_restart = 1;
+
+ if (sd->workarounds & SBP2_WORKAROUND_INQUIRY_36)
+ sdev->inquiry_len = 36;
+ return 0;
+}
+
+static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
+{
+ struct sbp2_device *sd = (struct sbp2_device *)sdev->host->hostdata;
+ struct fw_unit *unit = sd->unit;
+
+ sdev->use_10_for_rw = 1;
+
+ if (sdev->type == TYPE_ROM)
+ sdev->use_10_for_ms = 1;
+ if (sdev->type == TYPE_DISK &&
+ sd->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+ sdev->skip_ms_page_8 = 1;
+ if (sd->workarounds & SBP2_WORKAROUND_FIX_CAPACITY) {
+ fw_notify("setting fix_capacity for %s\n", unit->device.bus_id);
+ sdev->fix_capacity = 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Called by scsi stack when something has really gone wrong. Usually
+ * called when a command has timed-out for some reason.
+ */
+static int sbp2_scsi_abort(struct scsi_cmnd *cmd)
+{
+ struct sbp2_device *sd =
+ (struct sbp2_device *)cmd->device->host->hostdata;
+ struct fw_unit *unit = sd->unit;
+
+ fw_notify("sbp2_scsi_abort\n");
+ sbp2_agent_reset(unit);
+ sbp2_cancel_orbs(unit);
+
+ return SUCCESS;
+}
+
+static struct scsi_host_template scsi_driver_template = {
+ .module = THIS_MODULE,
+ .name = "SBP-2 IEEE-1394",
+ .proc_name = (char *)sbp2_driver_name,
+ .queuecommand = sbp2_scsi_queuecommand,
+ .slave_alloc = sbp2_scsi_slave_alloc,
+ .slave_configure = sbp2_scsi_slave_configure,
+ .eh_abort_handler = sbp2_scsi_abort,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .use_clustering = ENABLE_CLUSTERING,
+ .cmd_per_lun = 1,
+ .can_queue = 1,
+};
+
+MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
+MODULE_DESCRIPTION("SCSI over IEEE1394");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table);
+
+/* Provide a module alias so root-on-sbp2 initrds don't break. */
+#ifndef CONFIG_IEEE1394_SBP2_MODULE
+MODULE_ALIAS("sbp2");
+#endif
+
+static int __init sbp2_init(void)
+{
+ return driver_register(&sbp2_driver.driver);
+}
+
+static void __exit sbp2_cleanup(void)
+{
+ driver_unregister(&sbp2_driver.driver);
+}
+
+module_init(sbp2_init);
+module_exit(sbp2_cleanup);
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
new file mode 100644
index 0000000..7aebb8a
--- /dev/null
+++ b/drivers/firewire/fw-topology.c
@@ -0,0 +1,537 @@
+/*
+ * Incremental bus scan, based on bus topology
+ *
+ * Copyright (C) 2004-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/errno.h>
+#include "fw-transaction.h"
+#include "fw-topology.h"
+
+#define SELF_ID_PHY_ID(q) (((q) >> 24) & 0x3f)
+#define SELF_ID_EXTENDED(q) (((q) >> 23) & 0x01)
+#define SELF_ID_LINK_ON(q) (((q) >> 22) & 0x01)
+#define SELF_ID_GAP_COUNT(q) (((q) >> 16) & 0x3f)
+#define SELF_ID_PHY_SPEED(q) (((q) >> 14) & 0x03)
+#define SELF_ID_CONTENDER(q) (((q) >> 11) & 0x01)
+#define SELF_ID_PHY_INITIATOR(q) (((q) >> 1) & 0x01)
+#define SELF_ID_MORE_PACKETS(q) (((q) >> 0) & 0x01)
+
+#define SELF_ID_EXT_SEQUENCE(q) (((q) >> 20) & 0x07)
+
+static u32 *count_ports(u32 *sid, int *total_port_count, int *child_port_count)
+{
+ u32 q;
+ int port_type, shift, seq;
+
+ *total_port_count = 0;
+ *child_port_count = 0;
+
+ shift = 6;
+ q = *sid;
+ seq = 0;
+
+ while (1) {
+ port_type = (q >> shift) & 0x03;
+ switch (port_type) {
+ case SELFID_PORT_CHILD:
+ (*child_port_count)++;
+ case SELFID_PORT_PARENT:
+ case SELFID_PORT_NCONN:
+ (*total_port_count)++;
+ case SELFID_PORT_NONE:
+ break;
+ }
+
+ shift -= 2;
+ if (shift == 0) {
+ if (!SELF_ID_MORE_PACKETS(q))
+ return sid + 1;
+
+ shift = 16;
+ sid++;
+ q = *sid;
+
+ /*
+ * Check that the extra packets actually are
+ * extended self ID packets and that the
+ * sequence numbers in the extended self ID
+ * packets increase as expected.
+ */
+
+ if (!SELF_ID_EXTENDED(q) ||
+ seq != SELF_ID_EXT_SEQUENCE(q))
+ return NULL;
+
+ seq++;
+ }
+ }
+}
+
+static int get_port_type(u32 *sid, int port_index)
+{
+ int index, shift;
+
+ index = (port_index + 5) / 8;
+ shift = 16 - ((port_index + 5) & 7) * 2;
+ return (sid[index] >> shift) & 0x03;
+}
+
+static struct fw_node *fw_node_create(u32 sid, int port_count, int color)
+{
+ struct fw_node *node;
+
+ node = kzalloc(sizeof(*node) + port_count * sizeof(node->ports[0]),
+ GFP_ATOMIC);
+ if (node == NULL)
+ return NULL;
+
+ node->color = color;
+ node->node_id = LOCAL_BUS | SELF_ID_PHY_ID(sid);
+ node->link_on = SELF_ID_LINK_ON(sid);
+ node->phy_speed = SELF_ID_PHY_SPEED(sid);
+ node->port_count = port_count;
+
+ atomic_set(&node->ref_count, 1);
+ INIT_LIST_HEAD(&node->link);
+
+ return node;
+}
+
+/*
+ * Compute the maximum hop count for this node and it's children. The
+ * maximum hop count is the maximum number of connections between any
+ * two nodes in the subtree rooted at this node. We need this for
+ * setting the gap count. As we build the tree bottom up in
+ * build_tree() below, this is fairly easy to do: for each node we
+ * maintain the max hop count and the max depth, ie the number of hops
+ * to the furthest leaf. Computing the max hop count breaks down into
+ * two cases: either the path goes through this node, in which case
+ * the hop count is the sum of the two biggest child depths plus 2.
+ * Or it could be the case that the max hop path is entirely
+ * containted in a child tree, in which case the max hop count is just
+ * the max hop count of this child.
+ */
+static void update_hop_count(struct fw_node *node)
+{
+ int depths[2] = { -1, -1 };
+ int max_child_hops = 0;
+ int i;
+
+ for (i = 0; i < node->port_count; i++) {
+ if (node->ports[i].node == NULL)
+ continue;
+
+ if (node->ports[i].node->max_hops > max_child_hops)
+ max_child_hops = node->ports[i].node->max_hops;
+
+ if (node->ports[i].node->max_depth > depths[0]) {
+ depths[1] = depths[0];
+ depths[0] = node->ports[i].node->max_depth;
+ } else if (node->ports[i].node->max_depth > depths[1])
+ depths[1] = node->ports[i].node->max_depth;
+ }
+
+ node->max_depth = depths[0] + 1;
+ node->max_hops = max(max_child_hops, depths[0] + depths[1] + 2);
+}
+
+
+/**
+ * build_tree - Build the tree representation of the topology
+ * @self_ids: array of self IDs to create the tree from
+ * @self_id_count: the length of the self_ids array
+ * @local_id: the node ID of the local node
+ *
+ * This function builds the tree representation of the topology given
+ * by the self IDs from the latest bus reset. During the construction
+ * of the tree, the function checks that the self IDs are valid and
+ * internally consistent. On succcess this funtions returns the
+ * fw_node corresponding to the local card otherwise NULL.
+ */
+static struct fw_node *build_tree(struct fw_card *card,
+ u32 *sid, int self_id_count)
+{
+ struct fw_node *node, *child, *local_node, *irm_node;
+ struct list_head stack, *h;
+ u32 *next_sid, *end, q;
+ int i, port_count, child_port_count, phy_id, parent_count, stack_depth;
+ int gap_count, topology_type;
+
+ local_node = NULL;
+ node = NULL;
+ INIT_LIST_HEAD(&stack);
+ stack_depth = 0;
+ end = sid + self_id_count;
+ phy_id = 0;
+ irm_node = NULL;
+ gap_count = SELF_ID_GAP_COUNT(*sid);
+ topology_type = 0;
+
+ while (sid < end) {
+ next_sid = count_ports(sid, &port_count, &child_port_count);
+
+ if (next_sid == NULL) {
+ fw_error("Inconsistent extended self IDs.\n");
+ return NULL;
+ }
+
+ q = *sid;
+ if (phy_id != SELF_ID_PHY_ID(q)) {
+ fw_error("PHY ID mismatch in self ID: %d != %d.\n",
+ phy_id, SELF_ID_PHY_ID(q));
+ return NULL;
+ }
+
+ if (child_port_count > stack_depth) {
+ fw_error("Topology stack underflow\n");
+ return NULL;
+ }
+
+ /*
+ * Seek back from the top of our stack to find the
+ * start of the child nodes for this node.
+ */
+ for (i = 0, h = &stack; i < child_port_count; i++)
+ h = h->prev;
+ child = fw_node(h);
+
+ node = fw_node_create(q, port_count, card->color);
+ if (node == NULL) {
+ fw_error("Out of memory while building topology.");
+ return NULL;
+ }
+
+ if (phy_id == (card->node_id & 0x3f))
+ local_node = node;
+
+ if (SELF_ID_CONTENDER(q))
+ irm_node = node;
+
+ if (node->phy_speed == SCODE_BETA)
+ topology_type |= FW_TOPOLOGY_B;
+ else
+ topology_type |= FW_TOPOLOGY_A;
+
+ parent_count = 0;
+
+ for (i = 0; i < port_count; i++) {
+ switch (get_port_type(sid, i)) {
+ case SELFID_PORT_PARENT:
+ /*
+ * Who's your daddy? We dont know the
+ * parent node at this time, so we
+ * temporarily abuse node->color for
+ * remembering the entry in the
+ * node->ports array where the parent
+ * node should be. Later, when we
+ * handle the parent node, we fix up
+ * the reference.
+ */
+ parent_count++;
+ node->color = i;
+ break;
+
+ case SELFID_PORT_CHILD:
+ node->ports[i].node = child;
+ /*
+ * Fix up parent reference for this
+ * child node.
+ */
+ child->ports[child->color].node = node;
+ child->color = card->color;
+ child = fw_node(child->link.next);
+ break;
+ }
+ }
+
+ /*
+ * Check that the node reports exactly one parent
+ * port, except for the root, which of course should
+ * have no parents.
+ */
+ if ((next_sid == end && parent_count != 0) ||
+ (next_sid < end && parent_count != 1)) {
+ fw_error("Parent port inconsistency for node %d: "
+ "parent_count=%d\n", phy_id, parent_count);
+ return NULL;
+ }
+
+ /* Pop the child nodes off the stack and push the new node. */
+ __list_del(h->prev, &stack);
+ list_add_tail(&node->link, &stack);
+ stack_depth += 1 - child_port_count;
+
+ /*
+ * If all PHYs does not report the same gap count
+ * setting, we fall back to 63 which will force a gap
+ * count reconfiguration and a reset.
+ */
+ if (SELF_ID_GAP_COUNT(q) != gap_count)
+ gap_count = 63;
+
+ update_hop_count(node);
+
+ sid = next_sid;
+ phy_id++;
+ }
+
+ card->root_node = node;
+ card->irm_node = irm_node;
+ card->gap_count = gap_count;
+ card->topology_type = topology_type;
+
+ return local_node;
+}
+
+typedef void (*fw_node_callback_t)(struct fw_card * card,
+ struct fw_node * node,
+ struct fw_node * parent);
+
+static void
+for_each_fw_node(struct fw_card *card, struct fw_node *root,
+ fw_node_callback_t callback)
+{
+ struct list_head list;
+ struct fw_node *node, *next, *child, *parent;
+ int i;
+
+ INIT_LIST_HEAD(&list);
+
+ fw_node_get(root);
+ list_add_tail(&root->link, &list);
+ parent = NULL;
+ list_for_each_entry(node, &list, link) {
+ node->color = card->color;
+
+ for (i = 0; i < node->port_count; i++) {
+ child = node->ports[i].node;
+ if (!child)
+ continue;
+ if (child->color == card->color)
+ parent = child;
+ else {
+ fw_node_get(child);
+ list_add_tail(&child->link, &list);
+ }
+ }
+
+ callback(card, node, parent);
+ }
+
+ list_for_each_entry_safe(node, next, &list, link)
+ fw_node_put(node);
+}
+
+static void
+report_lost_node(struct fw_card *card,
+ struct fw_node *node, struct fw_node *parent)
+{
+ fw_node_event(card, node, FW_NODE_DESTROYED);
+ fw_node_put(node);
+}
+
+static void
+report_found_node(struct fw_card *card,
+ struct fw_node *node, struct fw_node *parent)
+{
+ int b_path = (node->phy_speed == SCODE_BETA);
+
+ if (parent != NULL) {
+ /* min() macro doesn't work here with gcc 3.4 */
+ node->max_speed = parent->max_speed < node->phy_speed ?
+ parent->max_speed : node->phy_speed;
+ node->b_path = parent->b_path && b_path;
+ } else {
+ node->max_speed = node->phy_speed;
+ node->b_path = b_path;
+ }
+
+ fw_node_event(card, node, FW_NODE_CREATED);
+}
+
+void fw_destroy_nodes(struct fw_card *card)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ card->color++;
+ if (card->local_node != NULL)
+ for_each_fw_node(card, card->local_node, report_lost_node);
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+
+static void move_tree(struct fw_node *node0, struct fw_node *node1, int port)
+{
+ struct fw_node *tree;
+ int i;
+
+ tree = node1->ports[port].node;
+ node0->ports[port].node = tree;
+ for (i = 0; i < tree->port_count; i++) {
+ if (tree->ports[i].node == node1) {
+ tree->ports[i].node = node0;
+ break;
+ }
+ }
+}
+
+/**
+ * update_tree - compare the old topology tree for card with the new
+ * one specified by root. Queue the nodes and mark them as either
+ * found, lost or updated. Update the nodes in the card topology tree
+ * as we go.
+ */
+static void
+update_tree(struct fw_card *card, struct fw_node *root)
+{
+ struct list_head list0, list1;
+ struct fw_node *node0, *node1;
+ int i, event;
+
+ INIT_LIST_HEAD(&list0);
+ list_add_tail(&card->local_node->link, &list0);
+ INIT_LIST_HEAD(&list1);
+ list_add_tail(&root->link, &list1);
+
+ node0 = fw_node(list0.next);
+ node1 = fw_node(list1.next);
+
+ while (&node0->link != &list0) {
+
+ /* assert(node0->port_count == node1->port_count); */
+ if (node0->link_on && !node1->link_on)
+ event = FW_NODE_LINK_OFF;
+ else if (!node0->link_on && node1->link_on)
+ event = FW_NODE_LINK_ON;
+ else
+ event = FW_NODE_UPDATED;
+
+ node0->node_id = node1->node_id;
+ node0->color = card->color;
+ node0->link_on = node1->link_on;
+ node0->initiated_reset = node1->initiated_reset;
+ node0->max_hops = node1->max_hops;
+ node1->color = card->color;
+ fw_node_event(card, node0, event);
+
+ if (card->root_node == node1)
+ card->root_node = node0;
+ if (card->irm_node == node1)
+ card->irm_node = node0;
+
+ for (i = 0; i < node0->port_count; i++) {
+ if (node0->ports[i].node && node1->ports[i].node) {
+ /*
+ * This port didn't change, queue the
+ * connected node for further
+ * investigation.
+ */
+ if (node0->ports[i].node->color == card->color)
+ continue;
+ list_add_tail(&node0->ports[i].node->link,
+ &list0);
+ list_add_tail(&node1->ports[i].node->link,
+ &list1);
+ } else if (node0->ports[i].node) {
+ /*
+ * The nodes connected here were
+ * unplugged; unref the lost nodes and
+ * queue FW_NODE_LOST callbacks for
+ * them.
+ */
+
+ for_each_fw_node(card, node0->ports[i].node,
+ report_lost_node);
+ node0->ports[i].node = NULL;
+ } else if (node1->ports[i].node) {
+ /*
+ * One or more node were connected to
+ * this port. Move the new nodes into
+ * the tree and queue FW_NODE_CREATED
+ * callbacks for them.
+ */
+ move_tree(node0, node1, i);
+ for_each_fw_node(card, node0->ports[i].node,
+ report_found_node);
+ }
+ }
+
+ node0 = fw_node(node0->link.next);
+ node1 = fw_node(node1->link.next);
+ }
+}
+
+static void
+update_topology_map(struct fw_card *card, u32 *self_ids, int self_id_count)
+{
+ int node_count;
+
+ card->topology_map[1]++;
+ node_count = (card->root_node->node_id & 0x3f) + 1;
+ card->topology_map[2] = (node_count << 16) | self_id_count;
+ card->topology_map[0] = (self_id_count + 2) << 16;
+ memcpy(&card->topology_map[3], self_ids, self_id_count * 4);
+ fw_compute_block_crc(card->topology_map);
+}
+
+void
+fw_core_handle_bus_reset(struct fw_card *card,
+ int node_id, int generation,
+ int self_id_count, u32 * self_ids)
+{
+ struct fw_node *local_node;
+ unsigned long flags;
+
+ fw_flush_transactions(card);
+
+ spin_lock_irqsave(&card->lock, flags);
+
+ /*
+ * If the new topology has a different self_id_count the topology
+ * changed, either nodes were added or removed. In that case we
+ * reset the IRM reset counter.
+ */
+ if (card->self_id_count != self_id_count)
+ card->bm_retries = 0;
+
+ card->node_id = node_id;
+ card->generation = generation;
+ card->reset_jiffies = jiffies;
+ schedule_delayed_work(&card->work, 0);
+
+ local_node = build_tree(card, self_ids, self_id_count);
+
+ update_topology_map(card, self_ids, self_id_count);
+
+ card->color++;
+
+ if (local_node == NULL) {
+ fw_error("topology build failed\n");
+ /* FIXME: We need to issue a bus reset in this case. */
+ } else if (card->local_node == NULL) {
+ card->local_node = local_node;
+ for_each_fw_node(card, local_node, report_found_node);
+ } else {
+ update_tree(card, local_node);
+ }
+
+ spin_unlock_irqrestore(&card->lock, flags);
+}
+EXPORT_SYMBOL(fw_core_handle_bus_reset);
diff --git a/drivers/firewire/fw-topology.h b/drivers/firewire/fw-topology.h
new file mode 100644
index 0000000..363b6cb
--- /dev/null
+++ b/drivers/firewire/fw-topology.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __fw_topology_h
+#define __fw_topology_h
+
+enum {
+ FW_TOPOLOGY_A = 0x01,
+ FW_TOPOLOGY_B = 0x02,
+ FW_TOPOLOGY_MIXED = 0x03,
+};
+
+enum {
+ FW_NODE_CREATED = 0x00,
+ FW_NODE_UPDATED = 0x01,
+ FW_NODE_DESTROYED = 0x02,
+ FW_NODE_LINK_ON = 0x03,
+ FW_NODE_LINK_OFF = 0x04,
+};
+
+struct fw_port {
+ struct fw_node *node;
+ unsigned speed : 3; /* S100, S200, ... S3200 */
+};
+
+struct fw_node {
+ u16 node_id;
+ u8 color;
+ u8 port_count;
+ unsigned link_on : 1;
+ unsigned initiated_reset : 1;
+ unsigned b_path : 1;
+ u8 phy_speed : 3; /* As in the self ID packet. */
+ u8 max_speed : 5; /* Minimum of all phy-speeds and port speeds on
+ * the path from the local node to this node. */
+ u8 max_depth : 4; /* Maximum depth to any leaf node */
+ u8 max_hops : 4; /* Max hops in this sub tree */
+ atomic_t ref_count;
+
+ /* For serializing node topology into a list. */
+ struct list_head link;
+
+ /* Upper layer specific data. */
+ void *data;
+
+ struct fw_port ports[0];
+};
+
+static inline struct fw_node *
+fw_node(struct list_head *l)
+{
+ return list_entry(l, struct fw_node, link);
+}
+
+static inline struct fw_node *
+fw_node_get(struct fw_node *node)
+{
+ atomic_inc(&node->ref_count);
+
+ return node;
+}
+
+static inline void
+fw_node_put(struct fw_node *node)
+{
+ if (atomic_dec_and_test(&node->ref_count))
+ kfree(node);
+}
+
+void
+fw_destroy_nodes(struct fw_card *card);
+
+int
+fw_compute_block_crc(u32 *block);
+
+
+#endif /* __fw_topology_h */
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
new file mode 100644
index 0000000..80d0121
--- /dev/null
+++ b/drivers/firewire/fw-transaction.c
@@ -0,0 +1,910 @@
+/*
+ * Core IEEE1394 transaction logic
+ *
+ * Copyright (C) 2004-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/poll.h>
+#include <linux/list.h>
+#include <linux/kthread.h>
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+
+#include "fw-transaction.h"
+#include "fw-topology.h"
+#include "fw-device.h"
+
+#define HEADER_PRI(pri) ((pri) << 0)
+#define HEADER_TCODE(tcode) ((tcode) << 4)
+#define HEADER_RETRY(retry) ((retry) << 8)
+#define HEADER_TLABEL(tlabel) ((tlabel) << 10)
+#define HEADER_DESTINATION(destination) ((destination) << 16)
+#define HEADER_SOURCE(source) ((source) << 16)
+#define HEADER_RCODE(rcode) ((rcode) << 12)
+#define HEADER_OFFSET_HIGH(offset_high) ((offset_high) << 0)
+#define HEADER_DATA_LENGTH(length) ((length) << 16)
+#define HEADER_EXTENDED_TCODE(tcode) ((tcode) << 0)
+
+#define HEADER_GET_TCODE(q) (((q) >> 4) & 0x0f)
+#define HEADER_GET_TLABEL(q) (((q) >> 10) & 0x3f)
+#define HEADER_GET_RCODE(q) (((q) >> 12) & 0x0f)
+#define HEADER_GET_DESTINATION(q) (((q) >> 16) & 0xffff)
+#define HEADER_GET_SOURCE(q) (((q) >> 16) & 0xffff)
+#define HEADER_GET_OFFSET_HIGH(q) (((q) >> 0) & 0xffff)
+#define HEADER_GET_DATA_LENGTH(q) (((q) >> 16) & 0xffff)
+#define HEADER_GET_EXTENDED_TCODE(q) (((q) >> 0) & 0xffff)
+
+#define PHY_CONFIG_GAP_COUNT(gap_count) (((gap_count) << 16) | (1 << 22))
+#define PHY_CONFIG_ROOT_ID(node_id) ((((node_id) & 0x3f) << 24) | (1 << 23))
+#define PHY_IDENTIFIER(id) ((id) << 30)
+
+static int
+close_transaction(struct fw_transaction *transaction,
+ struct fw_card *card, int rcode,
+ u32 *payload, size_t length)
+{
+ struct fw_transaction *t;
+ unsigned long flags;
+
+ spin_lock_irqsave(&card->lock, flags);
+ list_for_each_entry(t, &card->transaction_list, link) {
+ if (t == transaction) {
+ list_del(&t->link);
+ card->tlabel_mask &= ~(1 << t->tlabel);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (&t->link != &card->transaction_list) {
+ t->callback(card, rcode, payload, length, t->callback_data);
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
+/*
+ * Only valid for transactions that are potentially pending (ie have
+ * been sent).
+ */
+int
+fw_cancel_transaction(struct fw_card *card,
+ struct fw_transaction *transaction)
+{
+ /*
+ * Cancel the packet transmission if it's still queued. That
+ * will call the packet transmission callback which cancels
+ * the transaction.
+ */
+
+ if (card->driver->cancel_packet(card, &transaction->packet) == 0)
+ return 0;
+
+ /*
+ * If the request packet has already been sent, we need to see
+ * if the transaction is still pending and remove it in that case.
+ */
+
+ return close_transaction(transaction, card, RCODE_CANCELLED, NULL, 0);
+}
+EXPORT_SYMBOL(fw_cancel_transaction);
+
+static void
+transmit_complete_callback(struct fw_packet *packet,
+ struct fw_card *card, int status)
+{
+ struct fw_transaction *t =
+ container_of(packet, struct fw_transaction, packet);
+
+ switch (status) {
+ case ACK_COMPLETE:
+ close_transaction(t, card, RCODE_COMPLETE, NULL, 0);
+ break;
+ case ACK_PENDING:
+ t->timestamp = packet->timestamp;
+ break;
+ case ACK_BUSY_X:
+ case ACK_BUSY_A:
+ case ACK_BUSY_B:
+ close_transaction(t, card, RCODE_BUSY, NULL, 0);
+ break;
+ case ACK_DATA_ERROR:
+ close_transaction(t, card, RCODE_DATA_ERROR, NULL, 0);
+ break;
+ case ACK_TYPE_ERROR:
+ close_transaction(t, card, RCODE_TYPE_ERROR, NULL, 0);
+ break;
+ default:
+ /*
+ * In this case the ack is really a juju specific
+ * rcode, so just forward that to the callback.
+ */
+ close_transaction(t, card, status, NULL, 0);
+ break;
+ }
+}
+
+static void
+fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
+ int node_id, int source_id, int generation, int speed,
+ unsigned long long offset, void *payload, size_t length)
+{
+ int ext_tcode;
+
+ if (tcode > 0x10) {
+ ext_tcode = tcode - 0x10;
+ tcode = TCODE_LOCK_REQUEST;
+ } else
+ ext_tcode = 0;
+
+ packet->header[0] =
+ HEADER_RETRY(RETRY_X) |
+ HEADER_TLABEL(tlabel) |
+ HEADER_TCODE(tcode) |
+ HEADER_DESTINATION(node_id);
+ packet->header[1] =
+ HEADER_OFFSET_HIGH(offset >> 32) | HEADER_SOURCE(source_id);
+ packet->header[2] =
+ offset;
+
+ switch (tcode) {
+ case TCODE_WRITE_QUADLET_REQUEST:
+ packet->header[3] = *(u32 *)payload;
+ packet->header_length = 16;
+ packet->payload_length = 0;
+ break;
+
+ case TCODE_LOCK_REQUEST:
+ case TCODE_WRITE_BLOCK_REQUEST:
+ packet->header[3] =
+ HEADER_DATA_LENGTH(length) |
+ HEADER_EXTENDED_TCODE(ext_tcode);
+ packet->header_length = 16;
+ packet->payload = payload;
+ packet->payload_length = length;
+ break;
+
+ case TCODE_READ_QUADLET_REQUEST:
+ packet->header_length = 12;
+ packet->payload_length = 0;
+ break;
+
+ case TCODE_READ_BLOCK_REQUEST:
+ packet->header[3] =
+ HEADER_DATA_LENGTH(length) |
+ HEADER_EXTENDED_TCODE(ext_tcode);
+ packet->header_length = 16;
+ packet->payload_length = 0;
+ break;
+ }
+
+ packet->speed = speed;
+ packet->generation = generation;
+ packet->ack = 0;
+}
+
+/**
+ * This function provides low-level access to the IEEE1394 transaction
+ * logic. Most C programs would use either fw_read(), fw_write() or
+ * fw_lock() instead - those function are convenience wrappers for
+ * this function. The fw_send_request() function is primarily
+ * provided as a flexible, one-stop entry point for languages bindings
+ * and protocol bindings.
+ *
+ * FIXME: Document this function further, in particular the possible
+ * values for rcode in the callback. In short, we map ACK_COMPLETE to
+ * RCODE_COMPLETE, internal errors set errno and set rcode to
+ * RCODE_SEND_ERROR (which is out of range for standard ieee1394
+ * rcodes). All other rcodes are forwarded unchanged. For all
+ * errors, payload is NULL, length is 0.
+ *
+ * Can not expect the callback to be called before the function
+ * returns, though this does happen in some cases (ACK_COMPLETE and
+ * errors).
+ *
+ * The payload is only used for write requests and must not be freed
+ * until the callback has been called.
+ *
+ * @param card the card from which to send the request
+ * @param tcode the tcode for this transaction. Do not use
+ * TCODE_LOCK_REQUEST directly, insted use TCODE_LOCK_MASK_SWAP
+ * etc. to specify tcode and ext_tcode.
+ * @param node_id the destination node ID (bus ID and PHY ID concatenated)
+ * @param generation the generation for which node_id is valid
+ * @param speed the speed to use for sending the request
+ * @param offset the 48 bit offset on the destination node
+ * @param payload the data payload for the request subaction
+ * @param length the length in bytes of the data to read
+ * @param callback function to be called when the transaction is completed
+ * @param callback_data pointer to arbitrary data, which will be
+ * passed to the callback
+ */
+void
+fw_send_request(struct fw_card *card, struct fw_transaction *t,
+ int tcode, int node_id, int generation, int speed,
+ unsigned long long offset,
+ void *payload, size_t length,
+ fw_transaction_callback_t callback, void *callback_data)
+{
+ unsigned long flags;
+ int tlabel, source;
+
+ /*
+ * Bump the flush timer up 100ms first of all so we
+ * don't race with a flush timer callback.
+ */
+
+ mod_timer(&card->flush_timer, jiffies + DIV_ROUND_UP(HZ, 10));
+
+ /*
+ * Allocate tlabel from the bitmap and put the transaction on
+ * the list while holding the card spinlock.
+ */
+
+ spin_lock_irqsave(&card->lock, flags);
+
+ source = card->node_id;
+ tlabel = card->current_tlabel;
+ if (card->tlabel_mask & (1 << tlabel)) {
+ spin_unlock_irqrestore(&card->lock, flags);
+ callback(card, RCODE_SEND_ERROR, NULL, 0, callback_data);
+ return;
+ }
+
+ card->current_tlabel = (card->current_tlabel + 1) & 0x1f;
+ card->tlabel_mask |= (1 << tlabel);
+
+ list_add_tail(&t->link, &card->transaction_list);
+
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ /* Initialize rest of transaction, fill out packet and send it. */
+ t->node_id = node_id;
+ t->tlabel = tlabel;
+ t->callback = callback;
+ t->callback_data = callback_data;
+
+ fw_fill_request(&t->packet, tcode, t->tlabel,
+ node_id, source, generation,
+ speed, offset, payload, length);
+ t->packet.callback = transmit_complete_callback;
+
+ card->driver->send_request(card, &t->packet);
+}
+EXPORT_SYMBOL(fw_send_request);
+
+static void
+transmit_phy_packet_callback(struct fw_packet *packet,
+ struct fw_card *card, int status)
+{
+ kfree(packet);
+}
+
+static void send_phy_packet(struct fw_card *card, u32 data, int generation)
+{
+ struct fw_packet *packet;
+
+ packet = kzalloc(sizeof(*packet), GFP_ATOMIC);
+ if (packet == NULL)
+ return;
+
+ packet->header[0] = data;
+ packet->header[1] = ~data;
+ packet->header_length = 8;
+ packet->payload_length = 0;
+ packet->speed = SCODE_100;
+ packet->generation = generation;
+ packet->callback = transmit_phy_packet_callback;
+
+ card->driver->send_request(card, packet);
+}
+
+void fw_send_phy_config(struct fw_card *card,
+ int node_id, int generation, int gap_count)
+{
+ u32 q;
+
+ q = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
+ PHY_CONFIG_ROOT_ID(node_id) |
+ PHY_CONFIG_GAP_COUNT(gap_count);
+
+ send_phy_packet(card, q, generation);
+}
+
+void fw_flush_transactions(struct fw_card *card)
+{
+ struct fw_transaction *t, *next;
+ struct list_head list;
+ unsigned long flags;
+
+ INIT_LIST_HEAD(&list);
+ spin_lock_irqsave(&card->lock, flags);
+ list_splice_init(&card->transaction_list, &list);
+ card->tlabel_mask = 0;
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ list_for_each_entry_safe(t, next, &list, link) {
+ card->driver->cancel_packet(card, &t->packet);
+
+ /*
+ * At this point cancel_packet will never call the
+ * transaction callback, since we just took all the
+ * transactions out of the list. So do it here.
+ */
+ t->callback(card, RCODE_CANCELLED, NULL, 0, t->callback_data);
+ }
+}
+
+static struct fw_address_handler *
+lookup_overlapping_address_handler(struct list_head *list,
+ unsigned long long offset, size_t length)
+{
+ struct fw_address_handler *handler;
+
+ list_for_each_entry(handler, list, link) {
+ if (handler->offset < offset + length &&
+ offset < handler->offset + handler->length)
+ return handler;
+ }
+
+ return NULL;
+}
+
+static struct fw_address_handler *
+lookup_enclosing_address_handler(struct list_head *list,
+ unsigned long long offset, size_t length)
+{
+ struct fw_address_handler *handler;
+
+ list_for_each_entry(handler, list, link) {
+ if (handler->offset <= offset &&
+ offset + length <= handler->offset + handler->length)
+ return handler;
+ }
+
+ return NULL;
+}
+
+static DEFINE_SPINLOCK(address_handler_lock);
+static LIST_HEAD(address_handler_list);
+
+const struct fw_address_region fw_low_memory_region =
+ { .start = 0x000000000000ULL, .end = 0x000100000000ULL, };
+const struct fw_address_region fw_high_memory_region =
+ { .start = 0x000100000000ULL, .end = 0xffffe0000000ULL, };
+const struct fw_address_region fw_private_region =
+ { .start = 0xffffe0000000ULL, .end = 0xfffff0000000ULL, };
+const struct fw_address_region fw_csr_region =
+ { .start = 0xfffff0000000ULL, .end = 0xfffff0000800ULL, };
+const struct fw_address_region fw_unit_space_region =
+ { .start = 0xfffff0000900ULL, .end = 0x1000000000000ULL, };
+EXPORT_SYMBOL(fw_low_memory_region);
+EXPORT_SYMBOL(fw_high_memory_region);
+EXPORT_SYMBOL(fw_private_region);
+EXPORT_SYMBOL(fw_csr_region);
+EXPORT_SYMBOL(fw_unit_space_region);
+
+/**
+ * Allocate a range of addresses in the node space of the OHCI
+ * controller. When a request is received that falls within the
+ * specified address range, the specified callback is invoked. The
+ * parameters passed to the callback give the details of the
+ * particular request
+ */
+int
+fw_core_add_address_handler(struct fw_address_handler *handler,
+ const struct fw_address_region *region)
+{
+ struct fw_address_handler *other;
+ unsigned long flags;
+ int ret = -EBUSY;
+
+ spin_lock_irqsave(&address_handler_lock, flags);
+
+ handler->offset = region->start;
+ while (handler->offset + handler->length <= region->end) {
+ other =
+ lookup_overlapping_address_handler(&address_handler_list,
+ handler->offset,
+ handler->length);
+ if (other != NULL) {
+ handler->offset += other->length;
+ } else {
+ list_add_tail(&handler->link, &address_handler_list);
+ ret = 0;
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&address_handler_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(fw_core_add_address_handler);
+
+/**
+ * Deallocate a range of addresses allocated with fw_allocate. This
+ * will call the associated callback one last time with a the special
+ * tcode TCODE_DEALLOCATE, to let the client destroy the registered
+ * callback data. For convenience, the callback parameters offset and
+ * length are set to the start and the length respectively for the
+ * deallocated region, payload is set to NULL.
+ */
+void fw_core_remove_address_handler(struct fw_address_handler *handler)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&address_handler_lock, flags);
+ list_del(&handler->link);
+ spin_unlock_irqrestore(&address_handler_lock, flags);
+}
+EXPORT_SYMBOL(fw_core_remove_address_handler);
+
+struct fw_request {
+ struct fw_packet response;
+ u32 request_header[4];
+ int ack;
+ u32 length;
+ u32 data[0];
+};
+
+static void
+free_response_callback(struct fw_packet *packet,
+ struct fw_card *card, int status)
+{
+ struct fw_request *request;
+
+ request = container_of(packet, struct fw_request, response);
+ kfree(request);
+}
+
+void
+fw_fill_response(struct fw_packet *response, u32 *request_header,
+ int rcode, void *payload, size_t length)
+{
+ int tcode, tlabel, extended_tcode, source, destination;
+
+ tcode = HEADER_GET_TCODE(request_header[0]);
+ tlabel = HEADER_GET_TLABEL(request_header[0]);
+ source = HEADER_GET_DESTINATION(request_header[0]);
+ destination = HEADER_GET_SOURCE(request_header[1]);
+ extended_tcode = HEADER_GET_EXTENDED_TCODE(request_header[3]);
+
+ response->header[0] =
+ HEADER_RETRY(RETRY_1) |
+ HEADER_TLABEL(tlabel) |
+ HEADER_DESTINATION(destination);
+ response->header[1] =
+ HEADER_SOURCE(source) |
+ HEADER_RCODE(rcode);
+ response->header[2] = 0;
+
+ switch (tcode) {
+ case TCODE_WRITE_QUADLET_REQUEST:
+ case TCODE_WRITE_BLOCK_REQUEST:
+ response->header[0] |= HEADER_TCODE(TCODE_WRITE_RESPONSE);
+ response->header_length = 12;
+ response->payload_length = 0;
+ break;
+
+ case TCODE_READ_QUADLET_REQUEST:
+ response->header[0] |=
+ HEADER_TCODE(TCODE_READ_QUADLET_RESPONSE);
+ if (payload != NULL)
+ response->header[3] = *(u32 *)payload;
+ else
+ response->header[3] = 0;
+ response->header_length = 16;
+ response->payload_length = 0;
+ break;
+
+ case TCODE_READ_BLOCK_REQUEST:
+ case TCODE_LOCK_REQUEST:
+ response->header[0] |= HEADER_TCODE(tcode + 2);
+ response->header[3] =
+ HEADER_DATA_LENGTH(length) |
+ HEADER_EXTENDED_TCODE(extended_tcode);
+ response->header_length = 16;
+ response->payload = payload;
+ response->payload_length = length;
+ break;
+
+ default:
+ BUG();
+ return;
+ }
+}
+EXPORT_SYMBOL(fw_fill_response);
+
+static struct fw_request *
+allocate_request(struct fw_packet *p)
+{
+ struct fw_request *request;
+ u32 *data, length;
+ int request_tcode, t;
+
+ request_tcode = HEADER_GET_TCODE(p->header[0]);
+ switch (request_tcode) {
+ case TCODE_WRITE_QUADLET_REQUEST:
+ data = &p->header[3];
+ length = 4;
+ break;
+
+ case TCODE_WRITE_BLOCK_REQUEST:
+ case TCODE_LOCK_REQUEST:
+ data = p->payload;
+ length = HEADER_GET_DATA_LENGTH(p->header[3]);
+ break;
+
+ case TCODE_READ_QUADLET_REQUEST:
+ data = NULL;
+ length = 4;
+ break;
+
+ case TCODE_READ_BLOCK_REQUEST:
+ data = NULL;
+ length = HEADER_GET_DATA_LENGTH(p->header[3]);
+ break;
+
+ default:
+ BUG();
+ return NULL;
+ }
+
+ request = kmalloc(sizeof(*request) + length, GFP_ATOMIC);
+ if (request == NULL)
+ return NULL;
+
+ t = (p->timestamp & 0x1fff) + 4000;
+ if (t >= 8000)
+ t = (p->timestamp & ~0x1fff) + 0x2000 + t - 8000;
+ else
+ t = (p->timestamp & ~0x1fff) + t;
+
+ request->response.speed = p->speed;
+ request->response.timestamp = t;
+ request->response.generation = p->generation;
+ request->response.ack = 0;
+ request->response.callback = free_response_callback;
+ request->ack = p->ack;
+ request->length = length;
+ if (data)
+ memcpy(request->data, data, length);
+
+ memcpy(request->request_header, p->header, sizeof(p->header));
+
+ return request;
+}
+
+void
+fw_send_response(struct fw_card *card, struct fw_request *request, int rcode)
+{
+ /*
+ * Broadcast packets are reported as ACK_COMPLETE, so this
+ * check is sufficient to ensure we don't send response to
+ * broadcast packets or posted writes.
+ */
+ if (request->ack != ACK_PENDING)
+ return;
+
+ if (rcode == RCODE_COMPLETE)
+ fw_fill_response(&request->response, request->request_header,
+ rcode, request->data, request->length);
+ else
+ fw_fill_response(&request->response, request->request_header,
+ rcode, NULL, 0);
+
+ card->driver->send_response(card, &request->response);
+}
+EXPORT_SYMBOL(fw_send_response);
+
+void
+fw_core_handle_request(struct fw_card *card, struct fw_packet *p)
+{
+ struct fw_address_handler *handler;
+ struct fw_request *request;
+ unsigned long long offset;
+ unsigned long flags;
+ int tcode, destination, source;
+
+ if (p->payload_length > 2048) {
+ /* FIXME: send error response. */
+ return;
+ }
+
+ if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE)
+ return;
+
+ request = allocate_request(p);
+ if (request == NULL) {
+ /* FIXME: send statically allocated busy packet. */
+ return;
+ }
+
+ offset =
+ ((unsigned long long)
+ HEADER_GET_OFFSET_HIGH(p->header[1]) << 32) | p->header[2];
+ tcode = HEADER_GET_TCODE(p->header[0]);
+ destination = HEADER_GET_DESTINATION(p->header[0]);
+ source = HEADER_GET_SOURCE(p->header[0]);
+
+ spin_lock_irqsave(&address_handler_lock, flags);
+ handler = lookup_enclosing_address_handler(&address_handler_list,
+ offset, request->length);
+ spin_unlock_irqrestore(&address_handler_lock, flags);
+
+ /*
+ * FIXME: lookup the fw_node corresponding to the sender of
+ * this request and pass that to the address handler instead
+ * of the node ID. We may also want to move the address
+ * allocations to fw_node so we only do this callback if the
+ * upper layers registered it for this node.
+ */
+
+ if (handler == NULL)
+ fw_send_response(card, request, RCODE_ADDRESS_ERROR);
+ else
+ handler->address_callback(card, request,
+ tcode, destination, source,
+ p->generation, p->speed, offset,
+ request->data, request->length,
+ handler->callback_data);
+}
+EXPORT_SYMBOL(fw_core_handle_request);
+
+void
+fw_core_handle_response(struct fw_card *card, struct fw_packet *p)
+{
+ struct fw_transaction *t;
+ unsigned long flags;
+ u32 *data;
+ size_t data_length;
+ int tcode, tlabel, destination, source, rcode;
+
+ tcode = HEADER_GET_TCODE(p->header[0]);
+ tlabel = HEADER_GET_TLABEL(p->header[0]);
+ destination = HEADER_GET_DESTINATION(p->header[0]);
+ source = HEADER_GET_SOURCE(p->header[1]);
+ rcode = HEADER_GET_RCODE(p->header[1]);
+
+ spin_lock_irqsave(&card->lock, flags);
+ list_for_each_entry(t, &card->transaction_list, link) {
+ if (t->node_id == source && t->tlabel == tlabel) {
+ list_del(&t->link);
+ card->tlabel_mask &= ~(1 << t->tlabel);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (&t->link == &card->transaction_list) {
+ fw_notify("Unsolicited response (source %x, tlabel %x)\n",
+ source, tlabel);
+ return;
+ }
+
+ /*
+ * FIXME: sanity check packet, is length correct, does tcodes
+ * and addresses match.
+ */
+
+ switch (tcode) {
+ case TCODE_READ_QUADLET_RESPONSE:
+ data = (u32 *) &p->header[3];
+ data_length = 4;
+ break;
+
+ case TCODE_WRITE_RESPONSE:
+ data = NULL;
+ data_length = 0;
+ break;
+
+ case TCODE_READ_BLOCK_RESPONSE:
+ case TCODE_LOCK_RESPONSE:
+ data = p->payload;
+ data_length = HEADER_GET_DATA_LENGTH(p->header[3]);
+ break;
+
+ default:
+ /* Should never happen, this is just to shut up gcc. */
+ data = NULL;
+ data_length = 0;
+ break;
+ }
+
+ t->callback(card, rcode, data, data_length, t->callback_data);
+}
+EXPORT_SYMBOL(fw_core_handle_response);
+
+const struct fw_address_region topology_map_region =
+ { .start = 0xfffff0001000ull, .end = 0xfffff0001400ull, };
+
+static void
+handle_topology_map(struct fw_card *card, struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *payload, size_t length, void *callback_data)
+{
+ int i, start, end;
+ u32 *map;
+
+ if (!TCODE_IS_READ_REQUEST(tcode)) {
+ fw_send_response(card, request, RCODE_TYPE_ERROR);
+ return;
+ }
+
+ if ((offset & 3) > 0 || (length & 3) > 0) {
+ fw_send_response(card, request, RCODE_ADDRESS_ERROR);
+ return;
+ }
+
+ start = (offset - topology_map_region.start) / 4;
+ end = start + length / 4;
+ map = payload;
+
+ for (i = 0; i < length / 4; i++)
+ map[i] = cpu_to_be32(card->topology_map[start + i]);
+
+ fw_send_response(card, request, RCODE_COMPLETE);
+}
+
+static struct fw_address_handler topology_map = {
+ .length = 0x200,
+ .address_callback = handle_topology_map,
+};
+
+const struct fw_address_region registers_region =
+ { .start = 0xfffff0000000ull, .end = 0xfffff0000400ull, };
+
+static void
+handle_registers(struct fw_card *card, struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *payload, size_t length, void *callback_data)
+{
+ int reg = offset - CSR_REGISTER_BASE;
+ unsigned long long bus_time;
+ __be32 *data = payload;
+
+ switch (reg) {
+ case CSR_CYCLE_TIME:
+ case CSR_BUS_TIME:
+ if (!TCODE_IS_READ_REQUEST(tcode) || length != 4) {
+ fw_send_response(card, request, RCODE_TYPE_ERROR);
+ break;
+ }
+
+ bus_time = card->driver->get_bus_time(card);
+ if (reg == CSR_CYCLE_TIME)
+ *data = cpu_to_be32(bus_time);
+ else
+ *data = cpu_to_be32(bus_time >> 25);
+ fw_send_response(card, request, RCODE_COMPLETE);
+ break;
+
+ case CSR_BUS_MANAGER_ID:
+ case CSR_BANDWIDTH_AVAILABLE:
+ case CSR_CHANNELS_AVAILABLE_HI:
+ case CSR_CHANNELS_AVAILABLE_LO:
+ /*
+ * FIXME: these are handled by the OHCI hardware and
+ * the stack never sees these request. If we add
+ * support for a new type of controller that doesn't
+ * handle this in hardware we need to deal with these
+ * transactions.
+ */
+ BUG();
+ break;
+
+ case CSR_BUSY_TIMEOUT:
+ /* FIXME: Implement this. */
+ default:
+ fw_send_response(card, request, RCODE_ADDRESS_ERROR);
+ break;
+ }
+}
+
+static struct fw_address_handler registers = {
+ .length = 0x400,
+ .address_callback = handle_registers,
+};
+
+MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
+MODULE_DESCRIPTION("Core IEEE1394 transaction logic");
+MODULE_LICENSE("GPL");
+
+static const u32 vendor_textual_descriptor[] = {
+ /* textual descriptor leaf () */
+ 0x00060000,
+ 0x00000000,
+ 0x00000000,
+ 0x4c696e75, /* L i n u */
+ 0x78204669, /* x F i */
+ 0x72657769, /* r e w i */
+ 0x72650000, /* r e */
+};
+
+static const u32 model_textual_descriptor[] = {
+ /* model descriptor leaf () */
+ 0x00030000,
+ 0x00000000,
+ 0x00000000,
+ 0x4a756a75, /* J u j u */
+};
+
+static struct fw_descriptor vendor_id_descriptor = {
+ .length = ARRAY_SIZE(vendor_textual_descriptor),
+ .immediate = 0x03d00d1e,
+ .key = 0x81000000,
+ .data = vendor_textual_descriptor,
+};
+
+static struct fw_descriptor model_id_descriptor = {
+ .length = ARRAY_SIZE(model_textual_descriptor),
+ .immediate = 0x17000001,
+ .key = 0x81000000,
+ .data = model_textual_descriptor,
+};
+
+static int __init fw_core_init(void)
+{
+ int retval;
+
+ retval = bus_register(&fw_bus_type);
+ if (retval < 0)
+ return retval;
+
+ fw_cdev_major = register_chrdev(0, "firewire", &fw_device_ops);
+ if (fw_cdev_major < 0) {
+ bus_unregister(&fw_bus_type);
+ return fw_cdev_major;
+ }
+
+ retval = fw_core_add_address_handler(&topology_map,
+ &topology_map_region);
+ BUG_ON(retval < 0);
+
+ retval = fw_core_add_address_handler(®isters,
+ ®isters_region);
+ BUG_ON(retval < 0);
+
+ /* Add the vendor textual descriptor. */
+ retval = fw_core_add_descriptor(&vendor_id_descriptor);
+ BUG_ON(retval < 0);
+ retval = fw_core_add_descriptor(&model_id_descriptor);
+ BUG_ON(retval < 0);
+
+ return 0;
+}
+
+static void __exit fw_core_cleanup(void)
+{
+ unregister_chrdev(fw_cdev_major, "firewire");
+ bus_unregister(&fw_bus_type);
+}
+
+module_init(fw_core_init);
+module_exit(fw_core_cleanup);
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
new file mode 100644
index 0000000..acdc3be
--- /dev/null
+++ b/drivers/firewire/fw-transaction.h
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __fw_transaction_h
+#define __fw_transaction_h
+
+#include <linux/device.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/dma-mapping.h>
+#include <linux/firewire-constants.h>
+
+#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
+#define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0)
+#define TCODE_IS_REQUEST(tcode) (((tcode) & 2) == 0)
+#define TCODE_IS_RESPONSE(tcode) (((tcode) & 2) != 0)
+#define TCODE_HAS_REQUEST_DATA(tcode) (((tcode) & 12) != 4)
+#define TCODE_HAS_RESPONSE_DATA(tcode) (((tcode) & 12) != 0)
+
+#define LOCAL_BUS 0xffc0
+
+#define SELFID_PORT_CHILD 0x3
+#define SELFID_PORT_PARENT 0x2
+#define SELFID_PORT_NCONN 0x1
+#define SELFID_PORT_NONE 0x0
+
+#define PHY_PACKET_CONFIG 0x0
+#define PHY_PACKET_LINK_ON 0x1
+#define PHY_PACKET_SELF_ID 0x2
+
+/* Bit fields _within_ the PHY registers. */
+#define PHY_LINK_ACTIVE 0x80
+#define PHY_CONTENDER 0x40
+#define PHY_BUS_RESET 0x40
+#define PHY_BUS_SHORT_RESET 0x40
+
+#define CSR_REGISTER_BASE 0xfffff0000000ULL
+
+/* register offsets relative to CSR_REGISTER_BASE */
+#define CSR_STATE_CLEAR 0x0
+#define CSR_STATE_SET 0x4
+#define CSR_NODE_IDS 0x8
+#define CSR_RESET_START 0xc
+#define CSR_SPLIT_TIMEOUT_HI 0x18
+#define CSR_SPLIT_TIMEOUT_LO 0x1c
+#define CSR_CYCLE_TIME 0x200
+#define CSR_BUS_TIME 0x204
+#define CSR_BUSY_TIMEOUT 0x210
+#define CSR_BUS_MANAGER_ID 0x21c
+#define CSR_BANDWIDTH_AVAILABLE 0x220
+#define CSR_CHANNELS_AVAILABLE 0x224
+#define CSR_CHANNELS_AVAILABLE_HI 0x224
+#define CSR_CHANNELS_AVAILABLE_LO 0x228
+#define CSR_BROADCAST_CHANNEL 0x234
+#define CSR_CONFIG_ROM 0x400
+#define CSR_CONFIG_ROM_END 0x800
+#define CSR_FCP_COMMAND 0xB00
+#define CSR_FCP_RESPONSE 0xD00
+#define CSR_FCP_END 0xF00
+#define CSR_TOPOLOGY_MAP 0x1000
+#define CSR_TOPOLOGY_MAP_END 0x1400
+#define CSR_SPEED_MAP 0x2000
+#define CSR_SPEED_MAP_END 0x3000
+
+#define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
+#define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
+#define fw_debug(s, args...) printk(KERN_DEBUG KBUILD_MODNAME ": " s, ## args)
+
+static inline void
+fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
+{
+ u32 *dst = _dst;
+ u32 *src = _src;
+ int i;
+
+ for (i = 0; i < size / 4; i++)
+ dst[i] = cpu_to_be32(src[i]);
+}
+
+static inline void
+fw_memcpy_to_be32(void *_dst, void *_src, size_t size)
+{
+ fw_memcpy_from_be32(_dst, _src, size);
+}
+
+struct fw_card;
+struct fw_packet;
+struct fw_node;
+struct fw_request;
+
+struct fw_descriptor {
+ struct list_head link;
+ size_t length;
+ u32 immediate;
+ u32 key;
+ const u32 *data;
+};
+
+int fw_core_add_descriptor(struct fw_descriptor *desc);
+void fw_core_remove_descriptor(struct fw_descriptor *desc);
+
+typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
+ struct fw_card *card, int status);
+
+typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
+ void *data,
+ size_t length,
+ void *callback_data);
+
+typedef void (*fw_address_callback_t)(struct fw_card *card,
+ struct fw_request *request,
+ int tcode, int destination, int source,
+ int generation, int speed,
+ unsigned long long offset,
+ void *data, size_t length,
+ void *callback_data);
+
+typedef void (*fw_bus_reset_callback_t)(struct fw_card *handle,
+ int node_id, int generation,
+ u32 *self_ids,
+ int self_id_count,
+ void *callback_data);
+
+struct fw_packet {
+ int speed;
+ int generation;
+ u32 header[4];
+ size_t header_length;
+ void *payload;
+ size_t payload_length;
+ u32 timestamp;
+
+ /*
+ * This callback is called when the packet transmission has
+ * completed; for successful transmission, the status code is
+ * the ack received from the destination, otherwise it's a
+ * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
+ * The callback can be called from tasklet context and thus
+ * must never block.
+ */
+ fw_packet_callback_t callback;
+ int ack;
+ struct list_head link;
+ void *driver_data;
+};
+
+struct fw_transaction {
+ int node_id; /* The generation is implied; it is always the current. */
+ int tlabel;
+ int timestamp;
+ struct list_head link;
+
+ struct fw_packet packet;
+
+ /*
+ * The data passed to the callback is valid only during the
+ * callback.
+ */
+ fw_transaction_callback_t callback;
+ void *callback_data;
+};
+
+static inline struct fw_packet *
+fw_packet(struct list_head *l)
+{
+ return list_entry(l, struct fw_packet, link);
+}
+
+struct fw_address_handler {
+ u64 offset;
+ size_t length;
+ fw_address_callback_t address_callback;
+ void *callback_data;
+ struct list_head link;
+};
+
+
+struct fw_address_region {
+ u64 start;
+ u64 end;
+};
+
+extern const struct fw_address_region fw_low_memory_region;
+extern const struct fw_address_region fw_high_memory_region;
+extern const struct fw_address_region fw_private_region;
+extern const struct fw_address_region fw_csr_region;
+extern const struct fw_address_region fw_unit_space_region;
+
+int fw_core_add_address_handler(struct fw_address_handler *handler,
+ const struct fw_address_region *region);
+void fw_core_remove_address_handler(struct fw_address_handler *handler);
+void fw_fill_response(struct fw_packet *response, u32 *request_header,
+ int rcode, void *payload, size_t length);
+void fw_send_response(struct fw_card *card,
+ struct fw_request *request, int rcode);
+
+extern struct bus_type fw_bus_type;
+
+struct fw_card {
+ const struct fw_card_driver *driver;
+ struct device *device;
+ struct kref kref;
+
+ int node_id;
+ int generation;
+ /* This is the generation used for timestamping incoming requests. */
+ int request_generation;
+ int current_tlabel, tlabel_mask;
+ struct list_head transaction_list;
+ struct timer_list flush_timer;
+ unsigned long reset_jiffies;
+
+ unsigned long long guid;
+ int max_receive;
+ int link_speed;
+ int config_rom_generation;
+
+ /*
+ * We need to store up to 4 self ID for a maximum of 63
+ * devices plus 3 words for the topology map header.
+ */
+ int self_id_count;
+ u32 topology_map[252 + 3];
+
+ spinlock_t lock; /* Take this lock when handling the lists in
+ * this struct. */
+ struct fw_node *local_node;
+ struct fw_node *root_node;
+ struct fw_node *irm_node;
+ int color;
+ int gap_count;
+ int topology_type;
+
+ int index;
+
+ struct list_head link;
+
+ /* Work struct for BM duties. */
+ struct delayed_work work;
+ int bm_retries;
+ int bm_generation;
+};
+
+struct fw_card *fw_card_get(struct fw_card *card);
+void fw_card_put(struct fw_card *card);
+
+/*
+ * The iso packet format allows for an immediate header/payload part
+ * stored in 'header' immediately after the packet info plus an
+ * indirect payload part that is pointer to by the 'payload' field.
+ * Applications can use one or the other or both to implement simple
+ * low-bandwidth streaming (e.g. audio) or more advanced
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
+
+struct fw_iso_packet {
+ u16 payload_length; /* Length of indirect payload. */
+ u32 interrupt : 1; /* Generate interrupt on this packet */
+ u32 skip : 1; /* Set to not send packet at all. */
+ u32 tag : 2;
+ u32 sy : 4;
+ u32 header_length : 8; /* Length of immediate header. */
+ u32 header[0];
+};
+
+#define FW_ISO_CONTEXT_TRANSMIT 0
+#define FW_ISO_CONTEXT_RECEIVE 1
+
+#define FW_ISO_CONTEXT_MATCH_TAG0 1
+#define FW_ISO_CONTEXT_MATCH_TAG1 2
+#define FW_ISO_CONTEXT_MATCH_TAG2 4
+#define FW_ISO_CONTEXT_MATCH_TAG3 8
+#define FW_ISO_CONTEXT_MATCH_ALL_TAGS 15
+
+struct fw_iso_context;
+
+typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
+ u32 cycle,
+ size_t header_length,
+ void *header,
+ void *data);
+
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
+ * specified direction. Since the pages are to be used for DMA, they
+ * are not mapped into the kernel virtual address space. We store the
+ * DMA address in the page private. The helper function
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
+
+struct fw_iso_buffer {
+ enum dma_data_direction direction;
+ struct page **pages;
+ int page_count;
+};
+
+struct fw_iso_context {
+ struct fw_card *card;
+ int type;
+ int channel;
+ int speed;
+ size_t header_size;
+ fw_iso_callback_t callback;
+ void *callback_data;
+};
+
+int
+fw_iso_buffer_init(struct fw_iso_buffer *buffer,
+ struct fw_card *card,
+ int page_count,
+ enum dma_data_direction direction);
+int
+fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
+void
+fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
+
+struct fw_iso_context *
+fw_iso_context_create(struct fw_card *card, int type,
+ int channel, int speed, size_t header_size,
+ fw_iso_callback_t callback, void *callback_data);
+
+void
+fw_iso_context_destroy(struct fw_iso_context *ctx);
+
+int
+fw_iso_context_queue(struct fw_iso_context *ctx,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload);
+
+int
+fw_iso_context_start(struct fw_iso_context *ctx,
+ int cycle, int sync, int tags);
+
+int
+fw_iso_context_stop(struct fw_iso_context *ctx);
+
+struct fw_card_driver {
+ const char *name;
+
+ /*
+ * Enable the given card with the given initial config rom.
+ * This function is expected to activate the card, and either
+ * enable the PHY or set the link_on bit and initiate a bus
+ * reset.
+ */
+ int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
+
+ int (*update_phy_reg)(struct fw_card *card, int address,
+ int clear_bits, int set_bits);
+
+ /*
+ * Update the config rom for an enabled card. This function
+ * should change the config rom that is presented on the bus
+ * an initiate a bus reset.
+ */
+ int (*set_config_rom)(struct fw_card *card,
+ u32 *config_rom, size_t length);
+
+ void (*send_request)(struct fw_card *card, struct fw_packet *packet);
+ void (*send_response)(struct fw_card *card, struct fw_packet *packet);
+ /* Calling cancel is valid once a packet has been submitted. */
+ int (*cancel_packet)(struct fw_card *card, struct fw_packet *packet);
+
+ /*
+ * Allow the specified node ID to do direct DMA out and in of
+ * host memory. The card will disable this for all node when
+ * a bus reset happens, so driver need to reenable this after
+ * bus reset. Returns 0 on success, -ENODEV if the card
+ * doesn't support this, -ESTALE if the generation doesn't
+ * match.
+ */
+ int (*enable_phys_dma)(struct fw_card *card,
+ int node_id, int generation);
+
+ u64 (*get_bus_time)(struct fw_card *card);
+
+ struct fw_iso_context *
+ (*allocate_iso_context)(struct fw_card *card,
+ int type, size_t header_size);
+ void (*free_iso_context)(struct fw_iso_context *ctx);
+
+ int (*start_iso)(struct fw_iso_context *ctx,
+ s32 cycle, u32 sync, u32 tags);
+
+ int (*queue_iso)(struct fw_iso_context *ctx,
+ struct fw_iso_packet *packet,
+ struct fw_iso_buffer *buffer,
+ unsigned long payload);
+
+ int (*stop_iso)(struct fw_iso_context *ctx);
+};
+
+int
+fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
+
+void
+fw_send_request(struct fw_card *card, struct fw_transaction *t,
+ int tcode, int node_id, int generation, int speed,
+ unsigned long long offset,
+ void *data, size_t length,
+ fw_transaction_callback_t callback, void *callback_data);
+
+int fw_cancel_transaction(struct fw_card *card,
+ struct fw_transaction *transaction);
+
+void fw_flush_transactions(struct fw_card *card);
+
+void fw_send_phy_config(struct fw_card *card,
+ int node_id, int generation, int gap_count);
+
+/*
+ * Called by the topology code to inform the device code of node
+ * activity; found, lost, or updated nodes.
+ */
+void
+fw_node_event(struct fw_card *card, struct fw_node *node, int event);
+
+/* API used by card level drivers */
+
+void
+fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver,
+ struct device *device);
+int
+fw_card_add(struct fw_card *card,
+ u32 max_receive, u32 link_speed, u64 guid);
+
+void
+fw_core_remove_card(struct fw_card *card);
+
+void
+fw_core_handle_bus_reset(struct fw_card *card,
+ int node_id, int generation,
+ int self_id_count, u32 *self_ids);
+void
+fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
+
+void
+fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
+
+#endif /* __fw_transaction_h */
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index a19b65e..7f81789 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -240,11 +240,94 @@
}
#endif
+static inline int match_scancode(int code, int scancode)
+{
+ if (scancode == 0)
+ return 1;
+ return ((code & (HID_USAGE_PAGE | HID_USAGE)) == scancode);
+}
+
+static inline int match_keycode(int code, int keycode)
+{
+ if (keycode == 0)
+ return 1;
+ return (code == keycode);
+}
+
+static struct hid_usage *hidinput_find_key(struct hid_device *hid,
+ int scancode, int keycode)
+{
+ int i, j, k;
+ struct hid_report *report;
+ struct hid_usage *usage;
+
+ for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) {
+ list_for_each_entry(report, &hid->report_enum[k].report_list, list) {
+ for (i = 0; i < report->maxfield; i++) {
+ for ( j = 0; j < report->field[i]->maxusage; j++) {
+ usage = report->field[i]->usage + j;
+ if (usage->type == EV_KEY &&
+ match_scancode(usage->hid, scancode) &&
+ match_keycode(usage->code, keycode))
+ return usage;
+ }
+ }
+ }
+ }
+ return NULL;
+}
+
+static int hidinput_getkeycode(struct input_dev *dev, int scancode,
+ int *keycode)
+{
+ struct hid_device *hid = dev->private;
+ struct hid_usage *usage;
+
+ usage = hidinput_find_key(hid, scancode, 0);
+ if (usage) {
+ *keycode = usage->code;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int hidinput_setkeycode(struct input_dev *dev, int scancode,
+ int keycode)
+{
+ struct hid_device *hid = dev->private;
+ struct hid_usage *usage;
+ int old_keycode;
+
+ if (keycode < 0 || keycode > KEY_MAX)
+ return -EINVAL;
+
+ usage = hidinput_find_key(hid, scancode, 0);
+ if (usage) {
+ old_keycode = usage->code;
+ usage->code = keycode;
+
+ clear_bit(old_keycode, dev->keybit);
+ set_bit(usage->code, dev->keybit);
+#ifdef CONFIG_HID_DEBUG
+ printk (KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", keycode, scancode);
+#endif
+ /* Set the keybit for the old keycode if the old keycode is used
+ * by another key */
+ if (hidinput_find_key (hid, 0, old_keycode))
+ set_bit(old_keycode, dev->keybit);
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+
static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field,
struct hid_usage *usage)
{
struct input_dev *input = hidinput->input;
- struct hid_device *device = input->private;
+ struct hid_device *device = input_get_drvdata(input);
int max = 0, code;
unsigned long *bit = NULL;
@@ -553,6 +636,7 @@
case 0x1015: map_key_clear(KEY_RECORD); break;
case 0x1016: map_key_clear(KEY_PLAYER); break;
case 0x1017: map_key_clear(KEY_EJECTCD); break;
+ case 0x1018: map_key_clear(KEY_MEDIA); break;
case 0x1019: map_key_clear(KEY_PROG1); break;
case 0x101a: map_key_clear(KEY_PROG2); break;
case 0x101b: map_key_clear(KEY_PROG3); break;
@@ -560,9 +644,12 @@
case 0x1020: map_key_clear(KEY_ZOOMOUT); break;
case 0x1021: map_key_clear(KEY_ZOOMRESET); break;
case 0x1023: map_key_clear(KEY_CLOSE); break;
+ case 0x1027: map_key_clear(KEY_MENU); break;
/* this one is marked as 'Rotate' */
case 0x1028: map_key_clear(KEY_ANGLE); break;
case 0x1029: map_key_clear(KEY_SHUFFLE); break;
+ case 0x102a: map_key_clear(KEY_BACK); break;
+ case 0x102b: map_key_clear(KEY_CYCLEWINDOWS); break;
case 0x1041: map_key_clear(KEY_BATTERY); break;
case 0x1042: map_key_clear(KEY_WORDPROCESSOR); break;
case 0x1043: map_key_clear(KEY_SPREADSHEET); break;
@@ -855,13 +942,15 @@
static int hidinput_open(struct input_dev *dev)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
+
return hid->hid_open(hid);
}
static void hidinput_close(struct input_dev *dev)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
+
hid->hid_close(hid);
}
@@ -909,10 +998,12 @@
return -1;
}
- input_dev->private = hid;
+ input_set_drvdata(input_dev, hid);
input_dev->event = hid->hidinput_input_event;
input_dev->open = hidinput_open;
input_dev->close = hidinput_close;
+ input_dev->setkeycode = hidinput_setkeycode;
+ input_dev->getkeycode = hidinput_getkeycode;
input_dev->name = hid->name;
input_dev->phys = hid->phys;
@@ -921,7 +1012,7 @@
input_dev->id.vendor = hid->vendor;
input_dev->id.product = hid->product;
input_dev->id.version = hid->version;
- input_dev->cdev.dev = hid->dev;
+ input_dev->dev.parent = hid->dev;
hidinput->input = input_dev;
list_add_tail(&hidinput->list, &hid->inputs);
}
diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig
index 7c87bdc..1b4b572 100644
--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -25,12 +25,12 @@
depends on USB_HID && INPUT=n
config USB_HIDINPUT_POWERBOOK
- bool "Enable support for iBook/PowerBook special keys"
+ bool "Enable support for iBook/PowerBook/MacBook/MacBookPro special keys"
default n
depends on USB_HID
help
Say Y here if you want support for the special keys (Fn, Numlock) on
- Apple iBooks and PowerBooks.
+ Apple iBooks, PowerBooks, MacBooks and MacBook Pros.
If unsure, say N.
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 91d6103..d91b9da 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -446,7 +446,7 @@
static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct hid_field *field;
int offset;
@@ -626,14 +626,10 @@
{
struct usbhid_device *usbhid = hid->driver_data;
- if (usbhid->inbuf)
- usb_buffer_free(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
- if (usbhid->outbuf)
- usb_buffer_free(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
- if (usbhid->cr)
- usb_buffer_free(dev, sizeof(*(usbhid->cr)), usbhid->cr, usbhid->cr_dma);
- if (usbhid->ctrlbuf)
- usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
+ usb_buffer_free(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
+ usb_buffer_free(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
+ usb_buffer_free(dev, sizeof(*(usbhid->cr)), usbhid->cr, usbhid->cr_dma);
+ usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
}
/*
@@ -692,6 +688,30 @@
}
}
+/*
+ * Some USB barcode readers from cypress have usage min and usage max in
+ * the wrong order
+ */
+static void hid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
+{
+ short fixed = 0;
+ int i;
+
+ for (i = 0; i < rsize - 4; i++) {
+ if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
+ unsigned char tmp;
+
+ rdesc[i] = 0x19; rdesc[i+2] = 0x29;
+ tmp = rdesc[i+3];
+ rdesc[i+3] = rdesc[i+1];
+ rdesc[i+1] = tmp;
+ }
+ }
+
+ if (fixed)
+ info("Fixing up Cypress report descriptor");
+}
+
static struct hid_device *usb_hid_configure(struct usb_interface *intf)
{
struct usb_host_interface *interface = intf->cur_altsetting;
@@ -758,6 +778,9 @@
if (quirks & HID_QUIRK_LOGITECH_DESCRIPTOR)
hid_fixup_logitech_descriptor(rdesc, rsize);
+ if (quirks & HID_QUIRK_SWAPPED_MIN_MAX)
+ hid_fixup_cypress_descriptor(rdesc, rsize);
+
#ifdef CONFIG_HID_DEBUG
printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
for (n = 0; n < rsize; n++)
diff --git a/drivers/hid/usbhid/hid-lgff.c b/drivers/hid/usbhid/hid-lgff.c
index 92d2553..c5cd410 100644
--- a/drivers/hid/usbhid/hid-lgff.c
+++ b/drivers/hid/usbhid/hid-lgff.c
@@ -60,7 +60,7 @@
static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
int x, y;
diff --git a/drivers/hid/usbhid/hid-plff.c b/drivers/hid/usbhid/hid-plff.c
index 76d2e6e..d6a8f2b 100644
--- a/drivers/hid/usbhid/hid-plff.c
+++ b/drivers/hid/usbhid/hid-plff.c
@@ -37,7 +37,7 @@
static int hid_plff_play(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct plff_device *plff = data;
int left, right;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 17a8755..f6c4145 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -92,6 +92,8 @@
#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
#define USB_DEVICE_ID_CYPRESS_HIDCOM 0x5500
#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE 0x7417
+#define USB_DEVICE_ID_CYPRESS_BARCODE_1 0xde61
+#define USB_DEVICE_ID_CYPRESS_BARCODE_2 0xde64
#define USB_VENDOR_ID_DELL 0x413c
#define USB_DEVICE_ID_DELL_W7658 0x2005
@@ -193,6 +195,7 @@
#define USB_VENDOR_ID_LOGITECH 0x046d
#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101
+#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
#define USB_DEVICE_ID_MX3000_RECEIVER 0xc513
@@ -422,6 +425,7 @@
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
@@ -445,6 +449,9 @@
{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_SWAPPED_MIN_MAX },
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_SWAPPED_MIN_MAX },
+
{ 0, 0 }
};
diff --git a/drivers/hid/usbhid/hid-tmff.c b/drivers/hid/usbhid/hid-tmff.c
index ab67331..ab5ba6e 100644
--- a/drivers/hid/usbhid/hid-tmff.c
+++ b/drivers/hid/usbhid/hid-tmff.c
@@ -59,7 +59,7 @@
static int hid_tmff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct tmff_device *tmff = data;
int left, right; /* Rumbling */
diff --git a/drivers/hid/usbhid/hid-zpff.c b/drivers/hid/usbhid/hid-zpff.c
index 7bd8238..a7fbffc 100644
--- a/drivers/hid/usbhid/hid-zpff.c
+++ b/drivers/hid/usbhid/hid-zpff.c
@@ -37,7 +37,7 @@
static int hid_zpff_play(struct input_dev *dev, void *data,
struct ff_effect *effect)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct zpff_device *zpff = data;
int left, right;
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index a8b3d66..488d61b 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -51,6 +51,7 @@
wait_queue_head_t wait;
struct hid_device *hid;
struct list_head list;
+ spinlock_t list_lock;
};
struct hiddev_list {
@@ -161,7 +162,9 @@
{
struct hiddev *hiddev = hid->hiddev;
struct hiddev_list *list;
+ unsigned long flags;
+ spin_lock_irqsave(&hiddev->list_lock, flags);
list_for_each_entry(list, &hiddev->list, node) {
if (uref->field_index != HID_FIELD_INDEX_NONE ||
(list->flags & HIDDEV_FLAG_REPORT) != 0) {
@@ -171,6 +174,7 @@
kill_fasync(&list->fasync, SIGIO, POLL_IN);
}
}
+ spin_unlock_irqrestore(&hiddev->list_lock, flags);
wake_up_interruptible(&hiddev->wait);
}
@@ -235,9 +239,13 @@
static int hiddev_release(struct inode * inode, struct file * file)
{
struct hiddev_list *list = file->private_data;
+ unsigned long flags;
hiddev_fasync(-1, file, 0);
+
+ spin_lock_irqsave(&list->hiddev->list_lock, flags);
list_del(&list->node);
+ spin_unlock_irqrestore(&list->hiddev->list_lock, flags);
if (!--list->hiddev->open) {
if (list->hiddev->exist)
@@ -257,6 +265,7 @@
static int hiddev_open(struct inode *inode, struct file *file)
{
struct hiddev_list *list;
+ unsigned long flags;
int i = iminor(inode) - HIDDEV_MINOR_BASE;
@@ -267,7 +276,11 @@
return -ENOMEM;
list->hiddev = hiddev_table[i];
+
+ spin_lock_irqsave(&list->hiddev->list_lock, flags);
list_add_tail(&list->node, &hiddev_table[i]->list);
+ spin_unlock_irqrestore(&list->hiddev->list_lock, flags);
+
file->private_data = list;
if (!list->hiddev->open++)
@@ -773,6 +786,7 @@
init_waitqueue_head(&hiddev->wait);
INIT_LIST_HEAD(&hiddev->list);
+ spin_lock_init(&hiddev->list_lock);
hiddev->hid = hid;
hiddev->exist = 1;
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 65aa12e..1309787 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -133,12 +133,11 @@
static int usb_kbd_event(struct input_dev *dev, unsigned int type,
unsigned int code, int value)
{
- struct usb_kbd *kbd = dev->private;
+ struct usb_kbd *kbd = input_get_drvdata(dev);
if (type != EV_LED)
return -1;
-
kbd->newleds = (!!test_bit(LED_KANA, dev->led) << 3) | (!!test_bit(LED_COMPOSE, dev->led) << 3) |
(!!test_bit(LED_SCROLLL, dev->led) << 2) | (!!test_bit(LED_CAPSL, dev->led) << 1) |
(!!test_bit(LED_NUML, dev->led));
@@ -175,7 +174,7 @@
static int usb_kbd_open(struct input_dev *dev)
{
- struct usb_kbd *kbd = dev->private;
+ struct usb_kbd *kbd = input_get_drvdata(dev);
kbd->irq->dev = kbd->usbdev;
if (usb_submit_urb(kbd->irq, GFP_KERNEL))
@@ -186,7 +185,7 @@
static void usb_kbd_close(struct input_dev *dev)
{
- struct usb_kbd *kbd = dev->private;
+ struct usb_kbd *kbd = input_get_drvdata(dev);
usb_kill_urb(kbd->irq);
}
@@ -211,12 +210,9 @@
{
usb_free_urb(kbd->irq);
usb_free_urb(kbd->led);
- if (kbd->new)
- usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
- if (kbd->cr)
- usb_buffer_free(dev, sizeof(struct usb_ctrlrequest), kbd->cr, kbd->cr_dma);
- if (kbd->leds)
- usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
+ usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
+ usb_buffer_free(dev, sizeof(struct usb_ctrlrequest), kbd->cr, kbd->cr_dma);
+ usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
}
static int usb_kbd_probe(struct usb_interface *iface,
@@ -274,8 +270,9 @@
input_dev->name = kbd->name;
input_dev->phys = kbd->phys;
usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &iface->dev;
- input_dev->private = kbd;
+ input_dev->dev.parent = &iface->dev;
+
+ input_set_drvdata(input_dev, kbd);
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index 573776d..5345c73 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -96,7 +96,7 @@
static int usb_mouse_open(struct input_dev *dev)
{
- struct usb_mouse *mouse = dev->private;
+ struct usb_mouse *mouse = input_get_drvdata(dev);
mouse->irq->dev = mouse->usbdev;
if (usb_submit_urb(mouse->irq, GFP_KERNEL))
@@ -107,7 +107,7 @@
static void usb_mouse_close(struct input_dev *dev)
{
- struct usb_mouse *mouse = dev->private;
+ struct usb_mouse *mouse = input_get_drvdata(dev);
usb_kill_urb(mouse->irq);
}
@@ -171,7 +171,7 @@
input_dev->name = mouse->name;
input_dev->phys = mouse->phys;
usb_to_input_id(dev, &input_dev->id);
- input_dev->cdev.dev = &intf->dev;
+ input_dev->dev.parent = &intf->dev;
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
@@ -179,7 +179,8 @@
input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA);
input_dev->relbit[0] |= BIT(REL_WHEEL);
- input_dev->private = mouse;
+ input_set_drvdata(input_dev, mouse);
+
input_dev->open = usb_mouse_open;
input_dev->close = usb_mouse_close;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 3ba3a52..4d1cb5b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -4,6 +4,7 @@
menuconfig HWMON
tristate "Hardware Monitoring support"
+ depends on HAS_IOMEM
default y
help
Hardware monitoring devices let you monitor the hardware health
diff --git a/drivers/hwmon/ams/ams-input.c b/drivers/hwmon/ams/ams-input.c
index 1821016..ca7095d 100644
--- a/drivers/hwmon/ams/ams-input.c
+++ b/drivers/hwmon/ams/ams-input.c
@@ -87,7 +87,7 @@
ams_info.idev->id.vendor = 0;
ams_info.idev->open = ams_input_open;
ams_info.idev->close = ams_input_close;
- ams_info.idev->cdev.dev = &ams_info.of_dev->dev;
+ ams_info.idev->dev.parent = &ams_info.of_dev->dev;
input_set_abs_params(ams_info.idev, ABS_X, -50, 50, 3, 0);
input_set_abs_params(ams_info.idev, ABS_Y, -50, 50, 3, 0);
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index b51c104..0c160675 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -1100,7 +1100,7 @@
/* initialize the input class */
applesmc_idev->name = "applesmc";
applesmc_idev->id.bustype = BUS_HOST;
- applesmc_idev->cdev.dev = &pdev->dev;
+ applesmc_idev->dev.parent = &pdev->dev;
applesmc_idev->evbit[0] = BIT(EV_ABS);
applesmc_idev->open = applesmc_idev_open;
applesmc_idev->close = applesmc_idev_close;
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index f82fa2d..e0cf5e6 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -574,7 +574,7 @@
/* initialize the input class */
hdaps_idev->name = "hdaps";
- hdaps_idev->cdev.dev = &pdev->dev;
+ hdaps_idev->dev.parent = &pdev->dev;
hdaps_idev->evbit[0] = BIT(EV_ABS);
input_set_abs_params(hdaps_idev, ABS_X,
-256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT);
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 434a61b..9686734 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -4,6 +4,7 @@
menuconfig I2C
tristate "I2C support"
+ depends on HAS_IOMEM
---help---
I2C (pronounce: I-square-C) is a slow serial bus protocol used in
many micro controller applications and developed by Philips. SMBus,
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index f35156c..9c8b6d5 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
+#include <linux/err.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/delay.h>
@@ -226,13 +227,14 @@
adapter->algo = &at91_algorithm;
adapter->class = I2C_CLASS_HWMON;
adapter->dev.parent = &pdev->dev;
+ /* adapter->id == 0 ... only one TWI controller for now */
platform_set_drvdata(pdev, adapter);
clk_enable(twi_clk); /* enable peripheral clock */
at91_twi_hwinit(); /* initialize TWI controller */
- rc = i2c_add_adapter(adapter);
+ rc = i2c_add_numbered_adapter(adapter);
if (rc) {
dev_err(&pdev->dev, "Adapter %s registration failed\n",
adapter->name);
@@ -295,6 +297,9 @@
#define at91_i2c_resume NULL
#endif
+/* work with "modprobe at91_i2c" from hotplugging or coldplugging */
+MODULE_ALIAS("at91_i2c");
+
static struct platform_driver at91_i2c_driver = {
.probe = at91_i2c_probe,
.remove = __devexit_p(at91_i2c_remove),
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 873544a..8a0a99b 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -548,7 +548,7 @@
*/
icr = readl(_ICR(i2c));
icr &= ~(ICR_STOP | ICR_ACKNAK);
- writel(icr, _IRC(i2c));
+ writel(icr, _ICR(i2c));
}
/*
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1d06b41..9040809 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -7,6 +7,7 @@
if BLOCK
menu "ATA/ATAPI/MFM/RLL support"
+ depends on HAS_IOMEM
config IDE
tristate "ATA/ATAPI/MFM/RLL support"
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 1fe0457..66f8262 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -565,8 +565,7 @@
ide_hwif_t *hwif;
void __iomem *base;
- base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base)
return -ENOMEM;
@@ -574,8 +573,8 @@
ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
ec->irqmask = 1;
- ec->irq_data = state;
- ec->ops = &icside_ops_arcin_v5;
+
+ ecard_setirq(ec, &icside_ops_arcin_v5, state);
/*
* Be on the safe side - disable interrupts
@@ -583,10 +582,8 @@
icside_irqdisable_arcin_v5(ec, 0);
hwif = icside_setup(base, &icside_cardinfo_v5, ec);
- if (!hwif) {
- iounmap(base);
+ if (!hwif)
return -ENODEV;
- }
state->hwif[0] = hwif;
@@ -605,8 +602,7 @@
unsigned int sel = 0;
int ret;
- ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!ioc_base) {
ret = -ENOMEM;
goto out;
@@ -615,11 +611,10 @@
easi_base = ioc_base;
if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
- easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
- ecard_resource_len(ec, ECARD_RES_EASI));
+ easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
if (!easi_base) {
ret = -ENOMEM;
- goto unmap_slot;
+ goto out;
}
/*
@@ -630,8 +625,7 @@
writeb(sel, ioc_base);
- ec->irq_data = state;
- ec->ops = &icside_ops_arcin_v6;
+ ecard_setirq(ec, &icside_ops_arcin_v6, state);
state->irq_port = easi_base;
state->ioc_base = ioc_base;
@@ -649,7 +643,7 @@
if (!hwif || !mate) {
ret = -ENODEV;
- goto unmap_port;
+ goto out;
}
state->hwif[0] = hwif;
@@ -686,11 +680,6 @@
return 0;
- unmap_port:
- if (easi_base != ioc_base)
- iounmap(easi_base);
- unmap_slot:
- iounmap(ioc_base);
out:
return ret;
}
@@ -716,8 +705,7 @@
state->type = ICS_TYPE_NOTYPE;
state->dev = &ec->dev;
- idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {
unsigned int type;
@@ -725,7 +713,7 @@
type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
- iounmap(idmem);
+ ecardm_iounmap(ec, idmem);
state->type = type;
}
@@ -793,13 +781,6 @@
}
ecard_set_drvdata(ec, NULL);
- ec->ops = NULL;
- ec->irq_data = NULL;
-
- if (state->ioc_base)
- iounmap(state->ioc_base);
- if (state->ioc_base != state->irq_port)
- iounmap(state->irq_port);
kfree(state);
ecard_release_resources(ec);
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 890ea3f..83811af 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -63,8 +63,7 @@
if (ret)
goto out;
- base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base) {
ret = -ENOMEM;
goto release;
@@ -81,7 +80,6 @@
goto out;
}
- iounmap(base);
release:
ecard_release_resources(ec);
out:
@@ -96,7 +94,6 @@
/* there must be a better way */
ide_unregister(hwif - ide_hwifs);
- iounmap(hwif->hwif_data);
ecard_release_resources(ec);
}
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 61d7809..8012b3b 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -1,4 +1,7 @@
menu "IEEE 1394 (FireWire) support"
+ depends on PCI || BROKEN
+
+source "drivers/firewire/Kconfig"
config IEEE1394
tristate "IEEE 1394 (FireWire) support"
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 37deaae..994decc 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -1,4 +1,5 @@
menu "InfiniBand support"
+ depends on HAS_IOMEM
config INFINIBAND
depends on PCI || BROKEN
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 0e9b695..f814fb3 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -3,6 +3,7 @@
#
menu "Input device support"
+ depends on !S390
config INPUT
tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 55a7259..b234729 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -336,7 +336,7 @@
if (compat) {
len = NBITS_COMPAT(maxbit) * sizeof(compat_long_t);
- if (len < maxlen)
+ if (len > maxlen)
len = maxlen;
for (i = 0; i < len / sizeof(compat_long_t); i++)
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 3d4b619..e759944 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -51,7 +51,7 @@
static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
- unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
+ unsigned int pin = (unsigned int) input_get_drvdata(dev);
unsigned int count = 0;
if (type != EV_SND)
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index c90afee..d42fe89 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -3,6 +3,7 @@
#
menu "ISDN subsystem"
+ depends on !S390
config ISDN
tristate "ISDN support"
diff --git a/drivers/kvm/Kconfig b/drivers/kvm/Kconfig
index 703cc88..e8e37d8 100644
--- a/drivers/kvm/Kconfig
+++ b/drivers/kvm/Kconfig
@@ -2,6 +2,7 @@
# KVM configuration
#
menu "Virtualization"
+ depends on X86
config KVM
tristate "Kernel-based Virtual Machine (KVM) support"
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 80acd08..87d2046 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -1,5 +1,6 @@
menu "LED devices"
+ depends on HAS_IOMEM
config NEW_LEDS
bool "LED Support"
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 65814b0..c10ce91 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5103,7 +5103,7 @@
*
* Note: the following is an unsigned comparison.
*/
- if ((curr_events - rdev->last_events + 4096) > 8192) {
+ if ((long)curr_events - (long)rdev->last_events > 4096) {
rdev->last_events = curr_events;
idle = 0;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 97ee870..3a95cc5 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -271,21 +271,25 @@
*/
update_head_pos(mirror, r1_bio);
- if (uptodate || (conf->raid_disks - conf->mddev->degraded) <= 1) {
- /*
- * Set R1BIO_Uptodate in our master bio, so that
- * we will return a good error code for to the higher
- * levels even if IO on some other mirrored buffer fails.
- *
- * The 'master' represents the composite IO operation to
- * user-side. So if something waits for IO, then it will
- * wait for the 'master' bio.
+ if (uptodate)
+ set_bit(R1BIO_Uptodate, &r1_bio->state);
+ else {
+ /* If all other devices have failed, we want to return
+ * the error upwards rather than fail the last device.
+ * Here we redefine "uptodate" to mean "Don't want to retry"
*/
- if (uptodate)
- set_bit(R1BIO_Uptodate, &r1_bio->state);
+ unsigned long flags;
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (r1_bio->mddev->degraded == conf->raid_disks ||
+ (r1_bio->mddev->degraded == conf->raid_disks-1 &&
+ !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags)))
+ uptodate = 1;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ }
+ if (uptodate)
raid_end_bio_io(r1_bio);
- } else {
+ else {
/*
* oops, read error:
*/
@@ -992,13 +996,14 @@
unsigned long flags;
spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded++;
+ set_bit(Faulty, &rdev->flags);
spin_unlock_irqrestore(&conf->device_lock, flags);
/*
* if recovery is running, make sure it aborts.
*/
set_bit(MD_RECOVERY_ERR, &mddev->recovery);
- }
- set_bit(Faulty, &rdev->flags);
+ } else
+ set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
printk(KERN_ALERT "raid1: Disk failure on %s, disabling device. \n"
" Operation continuing on %d devices\n",
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 91d2579..624b21c 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -3,6 +3,7 @@
#
menu "Multimedia devices"
+ depends on HAS_IOMEM
config VIDEO_DEV
tristate "Video For Linux"
@@ -86,6 +87,14 @@
tristate
depends on I2C
+config DAB
+ boolean "DAB adapters"
+ default y
+ ---help---
+ Allow selecting support for for Digital Audio Broadcasting (DAB)
+ Receiver adapters.
+
+if DAB
config USB_DABUSB
tristate "DABUSB driver"
depends on USB
@@ -99,5 +108,6 @@
To compile this driver as a module, choose M here: the
module will be called dabusb.
+endif # DAB
endmenu
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index c578a52..8fa1993 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -5,4 +5,4 @@
obj-y := common/
obj-$(CONFIG_VIDEO_DEV) += video/
obj-$(CONFIG_VIDEO_DEV) += radio/
-obj-$(CONFIG_DVB) += dvb/
+obj-$(CONFIG_DVB_CORE) += dvb/
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 86cbdbc..ef3e54c 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -136,28 +136,45 @@
char *mem = vmalloc_32(length);
int slen = 0;
- if (NULL == mem) {
- return NULL;
- }
+ if (NULL == mem)
+ goto err_null;
- if (!(pt->slist = vmalloc_to_sg(mem, pages))) {
- vfree(mem);
- return NULL;
- }
+ if (!(pt->slist = vmalloc_to_sg(mem, pages)))
+ goto err_free_mem;
- if (saa7146_pgtable_alloc(pci, pt)) {
- kfree(pt->slist);
- pt->slist = NULL;
- vfree(mem);
- return NULL;
- }
+ if (saa7146_pgtable_alloc(pci, pt))
+ goto err_free_slist;
- slen = pci_map_sg(pci,pt->slist,pages,PCI_DMA_FROMDEVICE);
- if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen)) {
- return NULL;
- }
+ pt->nents = pages;
+ slen = pci_map_sg(pci,pt->slist,pt->nents,PCI_DMA_FROMDEVICE);
+ if (0 == slen)
+ goto err_free_pgtable;
+
+ if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen))
+ goto err_unmap_sg;
return mem;
+
+err_unmap_sg:
+ pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
+err_free_pgtable:
+ saa7146_pgtable_free(pci, pt);
+err_free_slist:
+ kfree(pt->slist);
+ pt->slist = NULL;
+err_free_mem:
+ vfree(mem);
+err_null:
+ return NULL;
+}
+
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, char *mem, struct saa7146_pgtable *pt)
+{
+ pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
+ saa7146_pgtable_free(pci, pt);
+ kfree(pt->slist);
+ pt->slist = NULL;
+ vfree(mem);
}
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
@@ -166,8 +183,6 @@
return;
pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
pt->cpu = NULL;
- kfree(pt->slist);
- pt->slist = NULL;
}
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
@@ -528,6 +543,7 @@
EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable);
EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
EXPORT_SYMBOL_GPL(saa7146_setgpio);
diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c
index c18a5da..b4770ae 100644
--- a/drivers/media/common/saa7146_fops.c
+++ b/drivers/media/common/saa7146_fops.c
@@ -307,7 +307,6 @@
return 0;
}
-int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg);
static int fops_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
/*
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index a97c8f5..efd2b74 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -2,25 +2,17 @@
# Multimedia device configuration
#
-menu "Digital Video Broadcasting Devices"
-
-config DVB
- bool "DVB For Linux"
- depends on NET && INET
- ---help---
- Support Digital Video Broadcasting hardware. Enable this if you
- own a DVB adapter and want to use it or if you compile Linux for
- a digital SetTopBox.
-
- API specs and user tools are available from <http://www.linuxtv.org/>.
-
- Please report problems regarding this driver to the LinuxDVB
- mailing list.
-
- If unsure say N.
-
source "drivers/media/dvb/dvb-core/Kconfig"
+menuconfig DVB_CAPTURE_DRIVERS
+ bool "DVB/ATSC adapters"
+ depends on DVB_CORE
+ default y
+ ---help---
+ Say Y to select Digital TV adapters
+
+if DVB_CAPTURE_DRIVERS
+
comment "Supported SAA7146 based PCI Adapters"
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/ttpci/Kconfig"
@@ -48,4 +40,4 @@
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
-endmenu
+endif # DVB_CAPTURE_DRIVERS
diff --git a/drivers/media/dvb/dvb-core/Kconfig b/drivers/media/dvb/dvb-core/Kconfig
index 1990eda..e3e6839 100644
--- a/drivers/media/dvb/dvb-core/Kconfig
+++ b/drivers/media/dvb/dvb-core/Kconfig
@@ -1,12 +1,22 @@
config DVB_CORE
- tristate "DVB Core Support"
- depends on DVB
+ tristate "DVB for Linux"
+ depends on NET && INET
select CRC32
help
+ Support Digital Video Broadcasting hardware. Enable this if you
+ own a DVB adapter and want to use it or if you compile Linux for
+ a digital SetTopBox.
+
DVB core utility functions for device handling, software fallbacks etc.
Say Y when you have a DVB card and want to use it. Say Y if your want
to build your drivers outside the kernel, but need the DVB core. All
in-kernel drivers will select this automatically if needed.
+
+ API specs and user tools are available from <http://www.linuxtv.org/>.
+
+ Please report problems regarding this driver to the LinuxDVB
+ mailing list.
+
If unsure say N.
config DVB_CORE_ATTACH
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 97715f7..4030816 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -19,6 +19,7 @@
#define USB_VID_COMPRO_UNK 0x145f
#define USB_VID_CYPRESS 0x04b4
#define USB_VID_DIBCOM 0x10b8
+#define USB_VID_DPOSH 0x1498
#define USB_VID_DVICO 0x0fe9
#define USB_VID_EMPIA 0xeb1a
#define USB_VID_GENPIX 0x09c0
@@ -61,6 +62,8 @@
#define USB_PID_DIBCOM_STK7700P 0x1e14
#define USB_PID_DIBCOM_STK7700P_PC 0x1e78
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
+#define USB_PID_DPOSH_M9206_COLD 0x9206
+#define USB_PID_DPOSH_M9206_WARM 0xa090
#define USB_PID_UNIWILL_STK7700P 0x6003
#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
@@ -145,6 +148,8 @@
#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513
#define USB_PID_OPERA1_COLD 0x2830
#define USB_PID_OPERA1_WARM 0x3829
+#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514
+#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513
#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 0d72173..6f824a5 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -119,7 +119,7 @@
* @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
- * @streaming_crtl: called to start and stop the MPEG2-TS streaming of the
+ * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the
* device (not URB submitting/killing).
* @pid_filter_ctrl: called to en/disable the PID filter, if any.
* @pid_filter: called to set/unset a PID for filtering.
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index 45d7bc2..c546dde 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -3,8 +3,8 @@
* Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
@@ -22,26 +22,7 @@
module_param_named(debug,dvb_usb_m920x_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-static struct dvb_usb_rc_key megasky_rc_keys [] = {
- { 0x0, 0x12, KEY_POWER },
- { 0x0, 0x1e, KEY_CYCLEWINDOWS }, /* min/max */
- { 0x0, 0x02, KEY_CHANNELUP },
- { 0x0, 0x05, KEY_CHANNELDOWN },
- { 0x0, 0x03, KEY_VOLUMEUP },
- { 0x0, 0x06, KEY_VOLUMEDOWN },
- { 0x0, 0x04, KEY_MUTE },
- { 0x0, 0x07, KEY_OK }, /* TS */
- { 0x0, 0x08, KEY_STOP },
- { 0x0, 0x09, KEY_MENU }, /* swap */
- { 0x0, 0x0a, KEY_REWIND },
- { 0x0, 0x1b, KEY_PAUSE },
- { 0x0, 0x1f, KEY_FASTFORWARD },
- { 0x0, 0x0c, KEY_RECORD },
- { 0x0, 0x0d, KEY_CAMERA }, /* screenshot */
- { 0x0, 0x0e, KEY_COFFEE }, /* "MTS" */
-};
-
-static inline int m9206_read(struct usb_device *udev, u8 request, u16 value,\
+static inline int m920x_read(struct usb_device *udev, u8 request, u16 value,
u16 index, void *data, int size)
{
int ret;
@@ -55,14 +36,14 @@
}
if (ret != size) {
- deb_rc("m920x_read = no data\n");
+ deb("m920x_read = no data\n");
return -EIO;
}
return 0;
}
-static inline int m9206_write(struct usb_device *udev, u8 request,
+static inline int m920x_write(struct usb_device *udev, u8 request,
u16 value, u16 index)
{
int ret;
@@ -74,32 +55,40 @@
return ret;
}
-static int m9206_init(struct dvb_usb_device *d)
+static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq)
{
int ret = 0;
/* Remote controller init. */
if (d->props.rc_query) {
- if ((ret = m9206_write(d->udev, M9206_CORE, 0xa8, M9206_RC_INIT2)) != 0)
- return ret;
+ deb("Initialising remote control\n");
+ while (rc_seq->address) {
+ if ((ret = m920x_write(d->udev, M9206_CORE,
+ rc_seq->data,
+ rc_seq->address)) != 0) {
+ deb("Initialising remote control failed\n");
+ return ret;
+ }
- if ((ret = m9206_write(d->udev, M9206_CORE, 0x51, M9206_RC_INIT1)) != 0)
- return ret;
+ rc_seq++;
+ }
+
+ deb("Initialising remote control success\n");
}
return ret;
}
-static int m9206_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
- struct m9206_state *m = d->priv;
+ struct m920x_state *m = d->priv;
int i, ret = 0;
u8 rc_state[2];
- if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
+ if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
goto unlock;
- if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
+ if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
goto unlock;
for (i = 0; i < d->props.rc_key_map_size; i++)
@@ -111,6 +100,14 @@
*state = REMOTE_NO_KEY_PRESSED;
goto unlock;
+ case 0x88: /* framing error or "invalid code" */
+ case 0x99:
+ case 0xc0:
+ case 0xd8:
+ *state = REMOTE_NO_KEY_PRESSED;
+ m->rep_count = 0;
+ goto unlock;
+
case 0x93:
case 0x92:
m->rep_count = 0;
@@ -118,31 +115,32 @@
goto unlock;
case 0x91:
- /* For comfort. */
+ /* prevent immediate auto-repeat */
if (++m->rep_count > 2)
*state = REMOTE_KEY_REPEAT;
+ else
+ *state = REMOTE_NO_KEY_PRESSED;
goto unlock;
default:
- deb_rc("Unexpected rc response %x\n", rc_state[0]);
+ deb("Unexpected rc state %02x\n", rc_state[0]);
*state = REMOTE_NO_KEY_PRESSED;
goto unlock;
}
}
if (rc_state[1] != 0)
- deb_rc("Unknown rc key %x\n", rc_state[1]);
+ deb("Unknown rc key %02x\n", rc_state[1]);
*state = REMOTE_NO_KEY_PRESSED;
- unlock:
+ unlock:
return ret;
}
/* I2C */
-static int m9206_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
- int num)
+static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i, j;
@@ -155,33 +153,40 @@
return -EAGAIN;
for (i = 0; i < num; i++) {
- if (msg[i].flags & (I2C_M_NO_RD_ACK|I2C_M_IGNORE_NAK|I2C_M_TEN) ||
- msg[i].len == 0) {
- /* For a 0 byte message, I think sending the address to index 0x80|0x40
- * would be the correct thing to do. However, zero byte messages are
- * only used for probing, and since we don't know how to get the slave's
- * ack, we can't probe. */
+ if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) {
+ /* For a 0 byte message, I think sending the address
+ * to index 0x80|0x40 would be the correct thing to
+ * do. However, zero byte messages are only used for
+ * probing, and since we don't know how to get the
+ * slave's ack, we can't probe. */
ret = -ENOTSUPP;
goto unlock;
}
/* Send START & address/RW bit */
if (!(msg[i].flags & I2C_M_NOSTART)) {
- if ((ret = m9206_write(d->udev, M9206_I2C, (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), 0x80)) != 0)
+ if ((ret = m920x_write(d->udev, M9206_I2C,
+ (msg[i].addr << 1) |
+ (msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0)
goto unlock;
/* Should check for ack here, if we knew how. */
}
if (msg[i].flags & I2C_M_RD) {
for (j = 0; j < msg[i].len; j++) {
- /* Last byte of transaction? Send STOP, otherwise send ACK. */
- int stop = (i+1 == num && j+1 == msg[i].len)?0x40:0x01;
- if ((ret = m9206_read(d->udev, M9206_I2C, 0x0, 0x20|stop, &msg[i].buf[j], 1)) != 0)
+ /* Last byte of transaction?
+ * Send STOP, otherwise send ACK. */
+ int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01;
+
+ if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
+ 0x20 | stop,
+ &msg[i].buf[j], 1)) != 0)
goto unlock;
}
} else {
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction? Then send STOP. */
- int stop = (i+1 == num && j+1 == msg[i].len)?0x40:0x00;
- if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
+ int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00;
+
+ if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
goto unlock;
/* Should check for ack here too. */
}
@@ -189,25 +194,25 @@
}
ret = num;
-unlock:
+ unlock:
mutex_unlock(&d->i2c_mutex);
return ret;
}
-static u32 m9206_i2c_func(struct i2c_adapter *adapter)
+static u32 m920x_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
-static struct i2c_algorithm m9206_i2c_algo = {
- .master_xfer = m9206_i2c_xfer,
- .functionality = m9206_i2c_func,
+static struct i2c_algorithm m920x_i2c_algo = {
+ .master_xfer = m920x_i2c_xfer,
+ .functionality = m920x_i2c_func,
};
-
-static int m9206_set_filter(struct dvb_usb_adapter *adap, int type, int idx,
- int pid)
+/* pid filter */
+static int m920x_set_filter(struct dvb_usb_adapter *adap,
+ int type, int idx, int pid)
{
int ret = 0;
@@ -216,18 +221,18 @@
pid |= 0x8000;
- if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
+ if ((ret = m920x_write(adap->dev->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
return ret;
- if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
+ if ((ret = m920x_write(adap->dev->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
return ret;
return ret;
}
-static int m9206_update_filters(struct dvb_usb_adapter *adap)
+static int m920x_update_filters(struct dvb_usb_adapter *adap)
{
- struct m9206_state *m = adap->dev->priv;
+ struct m920x_state *m = adap->dev->priv;
int enabled = m->filtering_enabled;
int i, ret = 0, filter = 0;
@@ -236,14 +241,14 @@
enabled = 0;
/* Disable all filters */
- if ((ret = m9206_set_filter(adap, 0x81, 1, enabled)) != 0)
+ if ((ret = m920x_set_filter(adap, 0x81, 1, enabled)) != 0)
return ret;
for (i = 0; i < M9206_MAX_FILTERS; i++)
- if ((ret = m9206_set_filter(adap, 0x81, i + 2, 0)) != 0)
+ if ((ret = m920x_set_filter(adap, 0x81, i + 2, 0)) != 0)
return ret;
- if ((ret = m9206_set_filter(adap, 0x82, 0, 0x0)) != 0)
+ if ((ret = m920x_set_filter(adap, 0x82, 0, 0x0)) != 0)
return ret;
/* Set */
@@ -252,40 +257,38 @@
if (m->filters[i] == 0)
continue;
- if ((ret = m9206_set_filter(adap, 0x81, filter + 2, m->filters[i])) != 0)
+ if ((ret = m920x_set_filter(adap, 0x81, filter + 2, m->filters[i])) != 0)
return ret;
filter++;
}
}
- if ((ret = m9206_set_filter(adap, 0x82, 0, 0x02f5)) != 0)
+ if ((ret = m920x_set_filter(adap, 0x82, 0, 0x02f5)) != 0)
return ret;
return ret;
}
-static int m9206_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
- struct m9206_state *m = adap->dev->priv;
+ struct m920x_state *m = adap->dev->priv;
m->filtering_enabled = onoff ? 1 : 0;
- return m9206_update_filters(adap);
+ return m920x_update_filters(adap);
}
-static int m9206_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
- int onoff)
+static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
{
- struct m9206_state *m = adap->dev->priv;
+ struct m920x_state *m = adap->dev->priv;
m->filters[index] = onoff ? pid : 0;
- return m9206_update_filters(adap);
+ return m920x_update_filters(adap);
}
-static int m9206_firmware_download(struct usb_device *udev,
- const struct firmware *fw)
+static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
{
u16 value, index, size;
u8 read[4], *buff;
@@ -293,13 +296,13 @@
buff = kmalloc(65536, GFP_KERNEL);
- if ((ret = m9206_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
+ if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
goto done;
- deb_rc("%x %x %x %x\n", read[0], read[1], read[2], read[3]);
+ deb("%x %x %x %x\n", read[0], read[1], read[2], read[3]);
- if ((ret = m9206_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
+ if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
goto done;
- deb_rc("%x\n", read[0]);
+ deb("%x\n", read[0]);
for (pass = 0; pass < 2; pass++) {
for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
@@ -317,11 +320,11 @@
memcpy(buff, fw->data + i, size);
ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
- M9206_FW,
- USB_TYPE_VENDOR | USB_DIR_OUT,
- value, index, buff, size, 20);
+ M9206_FW,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ value, index, buff, size, 20);
if (ret != size) {
- deb_rc("error while uploading fw!\n");
+ deb("error while uploading fw!\n");
ret = -EIO;
goto done;
}
@@ -330,7 +333,7 @@
i += size;
}
if (i != fw->size) {
- deb_rc("bad firmware file!\n");
+ deb("bad firmware file!\n");
ret = -EINVAL;
goto done;
}
@@ -338,11 +341,11 @@
msleep(36);
- /* m9206 will disconnect itself from the bus after this. */
- (void) m9206_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
- deb_rc("firmware uploaded!\n");
+ /* m920x will disconnect itself from the bus after this. */
+ (void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
+ deb("firmware uploaded!\n");
- done:
+ done:
kfree(buff);
return ret;
@@ -362,7 +365,8 @@
return 0;
}
-static int megasky_mt352_demod_init(struct dvb_frontend *fe)
+/* demod configurations */
+static int m920x_mt352_demod_init(struct dvb_frontend *fe)
{
u8 config[] = { CONFIG, 0x3d };
u8 clock[] = { CLOCK_CTL, 0x30 };
@@ -382,41 +386,18 @@
mt352_write(fe, unk1, ARRAY_SIZE(unk1));
mt352_write(fe, unk2, ARRAY_SIZE(unk2));
- deb_rc("Demod init!\n");
+ deb("Demod init!\n");
return 0;
}
-static struct mt352_config megasky_mt352_config = {
+static struct mt352_config m920x_mt352_config = {
.demod_address = 0x0f,
.no_tuner = 1,
- .demod_init = megasky_mt352_demod_init,
+ .demod_init = m920x_mt352_demod_init,
};
-static int megasky_mt352_frontend_attach(struct dvb_usb_adapter *adap)
-{
- deb_rc("megasky_frontend_attach!\n");
-
- if ((adap->fe = dvb_attach(mt352_attach, &megasky_mt352_config, &adap->dev->i2c_adap)) == NULL)
- return -EIO;
-
- return 0;
-}
-
-static struct qt1010_config megasky_qt1010_config = {
- .i2c_address = 0x62
-};
-
-static int megasky_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
-{
- if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
- &megasky_qt1010_config) == NULL)
- return -ENODEV;
-
- return 0;
-}
-
-static struct tda1004x_config digivox_tda10046_config = {
+static struct tda1004x_config m920x_tda10046_08_config = {
.demod_address = 0x08,
.invert = 0,
.invert_oclk = 0,
@@ -428,28 +409,151 @@
.request_firmware = NULL,
};
-static int digivox_tda10046_frontend_attach(struct dvb_usb_adapter *adap)
-{
- deb_rc("digivox_tda10046_frontend_attach!\n");
+static struct tda1004x_config m920x_tda10046_0b_config = {
+ .demod_address = 0x0b,
+ .invert = 0,
+ .invert_oclk = 0,
+ .ts_mode = TDA10046_TS_SERIAL,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .if_freq = TDA10046_FREQ_045,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GPTRI,
+ .request_firmware = NULL, /* uses firmware EEPROM */
+};
- if ((adap->fe = dvb_attach(tda10046_attach, &digivox_tda10046_config,
+/* tuner configurations */
+static struct qt1010_config m920x_qt1010_config = {
+ .i2c_address = 0x62
+};
+
+/* Callbacks for DVB USB */
+static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ deb("%s\n",__FUNCTION__);
+
+ if ((adap->fe = dvb_attach(mt352_attach,
+ &m920x_mt352_config,
&adap->dev->i2c_adap)) == NULL)
return -EIO;
return 0;
}
-static int digivox_tda8275_tuner_attach(struct dvb_usb_adapter *adap)
+static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap)
{
- if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap,
- NULL) == NULL)
- return -ENODEV;
+ deb("%s\n",__FUNCTION__);
+
+ if ((adap->fe = dvb_attach(tda10046_attach,
+ &m920x_tda10046_08_config,
+ &adap->dev->i2c_adap)) == NULL)
+ return -EIO;
+
return 0;
}
+static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ deb("%s\n",__FUNCTION__);
+
+ if ((adap->fe = dvb_attach(tda10046_attach,
+ &m920x_tda10046_0b_config,
+ &adap->dev->i2c_adap)) == NULL)
+ return -EIO;
+
+ return 0;
+}
+
+static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ deb("%s\n",__FUNCTION__);
+
+ if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ deb("%s\n",__FUNCTION__);
+
+ if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ deb("%s\n",__FUNCTION__);
+
+ if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+/* device-specific initialization */
+static struct m920x_inits megasky_rc_init [] = {
+ { M9206_RC_INIT2, 0xa8 },
+ { M9206_RC_INIT1, 0x51 },
+ { } /* terminating entry */
+};
+
+static struct m920x_inits tvwalkertwin_rc_init [] = {
+ { M9206_RC_INIT2, 0x00 },
+ { M9206_RC_INIT1, 0xef },
+ { 0xff28, 0x00 },
+ { 0xff23, 0x00 },
+ { 0xff21, 0x30 },
+ { } /* terminating entry */
+};
+
+/* ir keymaps */
+static struct dvb_usb_rc_key megasky_rc_keys [] = {
+ { 0x0, 0x12, KEY_POWER },
+ { 0x0, 0x1e, KEY_CYCLEWINDOWS }, /* min/max */
+ { 0x0, 0x02, KEY_CHANNELUP },
+ { 0x0, 0x05, KEY_CHANNELDOWN },
+ { 0x0, 0x03, KEY_VOLUMEUP },
+ { 0x0, 0x06, KEY_VOLUMEDOWN },
+ { 0x0, 0x04, KEY_MUTE },
+ { 0x0, 0x07, KEY_OK }, /* TS */
+ { 0x0, 0x08, KEY_STOP },
+ { 0x0, 0x09, KEY_MENU }, /* swap */
+ { 0x0, 0x0a, KEY_REWIND },
+ { 0x0, 0x1b, KEY_PAUSE },
+ { 0x0, 0x1f, KEY_FASTFORWARD },
+ { 0x0, 0x0c, KEY_RECORD },
+ { 0x0, 0x0d, KEY_CAMERA }, /* screenshot */
+ { 0x0, 0x0e, KEY_COFFEE }, /* "MTS" */
+};
+
+static struct dvb_usb_rc_key tvwalkertwin_rc_keys [] = {
+ { 0x0, 0x01, KEY_ZOOM }, /* Full Screen */
+ { 0x0, 0x02, KEY_CAMERA }, /* snapshot */
+ { 0x0, 0x03, KEY_MUTE },
+ { 0x0, 0x04, KEY_REWIND },
+ { 0x0, 0x05, KEY_PLAYPAUSE }, /* Play/Pause */
+ { 0x0, 0x06, KEY_FASTFORWARD },
+ { 0x0, 0x07, KEY_RECORD },
+ { 0x0, 0x08, KEY_STOP },
+ { 0x0, 0x09, KEY_TIME }, /* Timeshift */
+ { 0x0, 0x0c, KEY_COFFEE }, /* Recall */
+ { 0x0, 0x0e, KEY_CHANNELUP },
+ { 0x0, 0x12, KEY_POWER },
+ { 0x0, 0x15, KEY_MENU }, /* source */
+ { 0x0, 0x18, KEY_CYCLEWINDOWS }, /* TWIN PIP */
+ { 0x0, 0x1a, KEY_CHANNELDOWN },
+ { 0x0, 0x1b, KEY_VOLUMEDOWN },
+ { 0x0, 0x1e, KEY_VOLUMEUP },
+};
+
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties megasky_properties;
static struct dvb_usb_device_properties digivox_mini_ii_properties;
+static struct dvb_usb_device_properties tvwalkertwin_properties;
+static struct dvb_usb_device_properties dposh_properties;
static int m920x_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -457,19 +561,57 @@
struct dvb_usb_device *d;
struct usb_host_interface *alt;
int ret;
+ struct m920x_inits *rc_init_seq = NULL;
+ int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber;
- deb_rc("Probed!\n");
+ deb("Probing for m920x device at interface %d\n", bInterfaceNumber);
- if (((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0) ||
- ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, THIS_MODULE, &d)) == 0))
- goto found;
+ if (bInterfaceNumber == 0) {
+ /* Single-tuner device, or first interface on
+ * multi-tuner device
+ */
- return ret;
+ if ((ret = dvb_usb_device_init(intf, &megasky_properties,
+ THIS_MODULE, &d)) == 0) {
+ rc_init_seq = megasky_rc_init;
+ goto found;
+ }
-found:
+ if ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties,
+ THIS_MODULE, &d)) == 0) {
+ /* No remote control, so no rc_init_seq */
+ goto found;
+ }
+
+ /* This configures both tuners on the TV Walker Twin */
+ if ((ret = dvb_usb_device_init(intf, &tvwalkertwin_properties,
+ THIS_MODULE, &d)) == 0) {
+ rc_init_seq = tvwalkertwin_rc_init;
+ goto found;
+ }
+
+ if ((ret = dvb_usb_device_init(intf, &dposh_properties,
+ THIS_MODULE, &d)) == 0) {
+ /* Remote controller not supported yet. */
+ goto found;
+ }
+
+ return ret;
+ } else {
+ /* Another interface on a multi-tuner device */
+
+ /* The LifeView TV Walker Twin gets here, but struct
+ * tvwalkertwin_properties already configured both
+ * tuners, so there is nothing for us to do here
+ */
+
+ return -ENODEV;
+ }
+
+ found:
alt = usb_altnum_to_altsetting(intf, 1);
if (alt == NULL) {
- deb_rc("No alt found!\n");
+ deb("No alt found!\n");
return -ENODEV;
}
@@ -478,7 +620,7 @@
if (ret < 0)
return ret;
- if ((ret = m9206_init(d)) != 0)
+ if ((ret = m920x_init(d, rc_init_seq)) != 0)
return ret;
return ret;
@@ -488,6 +630,12 @@
{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
USB_PID_MSI_DIGI_VOX_MINI_II) },
+ { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
+ USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) },
+ { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
+ USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
+ { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
+ { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, m920x_table);
@@ -497,14 +645,14 @@
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-megasky-02.fw",
- .download_firmware = m9206_firmware_download,
+ .download_firmware = m920x_firmware_download,
.rc_interval = 100,
.rc_key_map = megasky_rc_keys,
.rc_key_map_size = ARRAY_SIZE(megasky_rc_keys),
- .rc_query = m9206_rc_query,
+ .rc_query = m920x_rc_query,
- .size_of_priv = sizeof(struct m9206_state),
+ .size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
@@ -513,11 +661,11 @@
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
- .pid_filter = m9206_pid_filter,
- .pid_filter_ctrl = m9206_pid_filter_ctrl,
+ .pid_filter = m920x_pid_filter,
+ .pid_filter_ctrl = m920x_pid_filter_ctrl,
- .frontend_attach = megasky_mt352_frontend_attach,
- .tuner_attach = megasky_qt1010_tuner_attach,
+ .frontend_attach = m920x_mt352_frontend_attach,
+ .tuner_attach = m920x_qt1010_tuner_attach,
.stream = {
.type = USB_BULK,
@@ -530,7 +678,7 @@
}
},
}},
- .i2c_algo = &m9206_i2c_algo,
+ .i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
@@ -546,22 +694,22 @@
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-digivox-02.fw",
- .download_firmware = m9206_firmware_download,
+ .download_firmware = m920x_firmware_download,
- .size_of_priv = sizeof(struct m9206_state),
+ .size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
- .pid_filter = m9206_pid_filter,
- .pid_filter_ctrl = m9206_pid_filter_ctrl,
+ .pid_filter = m920x_pid_filter,
+ .pid_filter_ctrl = m920x_pid_filter_ctrl,
- .frontend_attach = digivox_tda10046_frontend_attach,
- .tuner_attach = digivox_tda8275_tuner_attach,
+ .frontend_attach = m920x_tda10046_08_frontend_attach,
+ .tuner_attach = m920x_tda8275_60_tuner_attach,
.stream = {
.type = USB_BULK,
@@ -574,7 +722,7 @@
}
},
}},
- .i2c_algo = &m9206_i2c_algo,
+ .i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
@@ -585,6 +733,122 @@
}
};
+/* LifeView TV Walker Twin support by Nick Andrew <nick@nick-andrew.net>
+ *
+ * LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A
+ * TDA10046 #0 is located at i2c address 0x08
+ * TDA10046 #1 is located at i2c address 0x0b (presently disabled - not yet working)
+ * TDA8275A #0 is located at i2c address 0x60
+ * TDA8275A #1 is located at i2c address 0x61 (presently disabled - not yet working)
+ */
+static struct dvb_usb_device_properties tvwalkertwin_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .firmware = "dvb-usb-tvwalkert.fw",
+ .download_firmware = m920x_firmware_download,
+
+ .rc_interval = 100,
+ .rc_key_map = tvwalkertwin_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(tvwalkertwin_rc_keys),
+ .rc_query = m920x_rc_query,
+
+ .size_of_priv = sizeof(struct m920x_state),
+
+ .identify_state = m920x_identify_state,
+ .num_adapters = 1,
+ .adapter = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m920x_pid_filter,
+ .pid_filter_ctrl = m920x_pid_filter_ctrl,
+
+ .frontend_attach = m920x_tda10046_08_frontend_attach,
+ .tuner_attach = m920x_tda8275_60_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x81,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ }},{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m920x_pid_filter,
+ .pid_filter_ctrl = m920x_pid_filter_ctrl,
+
+ .frontend_attach = m920x_tda10046_0b_frontend_attach,
+ .tuner_attach = m920x_tda8275_61_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ },
+ }},
+ .i2c_algo = &m920x_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ { .name = "LifeView TV Walker Twin DVB-T USB2.0",
+ .cold_ids = { &m920x_table[2], NULL },
+ .warm_ids = { &m920x_table[3], NULL },
+ },
+ }
+};
+
+static struct dvb_usb_device_properties dposh_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .firmware = "dvb-usb-dposh-01.fw",
+ .download_firmware = m920x_firmware_download,
+
+ .size_of_priv = sizeof(struct m920x_state),
+
+ .identify_state = m920x_identify_state,
+ .num_adapters = 1,
+ .adapter = {{
+ /* Hardware pid filters don't work with this device/firmware */
+
+ .frontend_attach = m920x_mt352_frontend_attach,
+ .tuner_attach = m920x_qt1010_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x81,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ },
+ }},
+ .i2c_algo = &m920x_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ { .name = "Dposh DVB-T USB2.0",
+ .cold_ids = { &m920x_table[4], NULL },
+ .warm_ids = { &m920x_table[5], NULL },
+ },
+ }
+};
+
static struct usb_driver m920x_driver = {
.name = "dvb_usb_m920x",
.probe = m920x_probe,
@@ -615,6 +879,11 @@
module_exit (m920x_module_exit);
MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
-MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / Uli m920x");
+MODULE_DESCRIPTION("DVB Driver for ULI M920x");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ */
diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h
index 7dd3db6..2c8942d 100644
--- a/drivers/media/dvb/dvb-usb/m920x.h
+++ b/drivers/media/dvb/dvb-usb/m920x.h
@@ -4,7 +4,7 @@
#define DVB_USB_LOG_PREFIX "m920x"
#include "dvb-usb.h"
-#define deb_rc(args...) dprintk(dvb_usb_m920x_debug,0x01,args)
+#define deb(args...) dprintk(dvb_usb_m920x_debug,0x01,args)
#define M9206_CORE 0x22
#define M9206_RC_STATE 0xff51
@@ -59,9 +59,18 @@
response to a write, is unknown.
*/
-struct m9206_state {
+struct m920x_state {
u16 filters[M9206_MAX_FILTERS];
int filtering_enabled;
int rep_count;
};
+
+/* Initialisation data for the m920x
+ */
+
+struct m920x_inits {
+ u16 address;
+ u8 data;
+};
+
#endif
diff --git a/drivers/media/dvb/dvb-usb/vp702x-fe.c b/drivers/media/dvb/dvb-usb/vp702x-fe.c
index 3ecb2e0..c3fdc7c 100644
--- a/drivers/media/dvb/dvb-usb/vp702x-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp702x-fe.c
@@ -204,8 +204,8 @@
static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
{
- //struct vp702x_fe_state *st = fe->demodulator_priv;
- u8 cmd[8];//,ibuf[10];
+ struct vp702x_fe_state *st = fe->demodulator_priv;
+ u8 cmd[8],ibuf[10];
memset(cmd,0,8);
deb_fe("%s\n",__FUNCTION__);
@@ -218,12 +218,12 @@
memcpy(&cmd[3], m->msg, m->msg_len);
cmd[7] = vp702x_chksum(cmd,0,7);
-// vp702x_usb_inout_op(st->d,cmd,8,ibuf,10,100);
+ vp702x_usb_inout_op(st->d,cmd,8,ibuf,10,100);
-// if (ibuf[2] == 0 && ibuf[3] == 0)
-// deb_fe("diseqc cmd failed.\n");
-// else
-// deb_fe("diseqc cmd succeeded.\n");
+ if (ibuf[2] == 0 && ibuf[3] == 0)
+ deb_fe("diseqc cmd failed.\n");
+ else
+ deb_fe("diseqc cmd succeeded.\n");
return 0;
}
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 058df5c..08a2599 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -293,12 +293,20 @@
* but no packets have been transfered.
* [2] Sometimes (actually very often) NBPACKETS stays at zero
* although one packet has been transfered.
+ * [3] Sometimes (actually rarely), the card gets into an erroneous
+ * mode where it continuously generates interrupts, claiming it
+ * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
+ * has been transfered. Only a reset seems to solve this
*/
if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
unsigned int i = 0;
while (pluto->dma_buf[i] == 0x47)
i += 188;
nbpackets = i / 188;
+ if (i == 0) {
+ pluto_reset_ts(pluto, 1);
+ dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
+ }
}
dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 67becdd..ef1108c 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -1246,6 +1246,9 @@
if (!budget->feeding1 || (newdma == olddma))
return;
+ /* Ensure streamed PCI data is synced to CPU */
+ pci_dma_sync_sg_for_cpu(budget->dev->pci, budget->pt.slist, budget->pt.nents, PCI_DMA_FROMDEVICE);
+
#if 0
/* track rps1 activity */
printk("vpeirq: %02x Event Counter 1 0x%04x\n",
@@ -2679,8 +2682,8 @@
err_pci_free_5:
pci_free_consistent(pdev, 8192, av7110->debi_virt, av7110->debi_bus);
err_saa71466_vfree_4:
- if (!av7110->grabbing)
- saa7146_pgtable_free(pdev, &av7110->pt);
+ if (av7110->grabbing)
+ saa7146_vfree_destroy_pgtable(pdev, av7110->grabbing, &av7110->pt);
err_i2c_del_3:
i2c_del_adapter(&av7110->i2c_adap);
err_dvb_unregister_adapter_2:
@@ -2710,7 +2713,7 @@
SAA7146_ISR_CLEAR(saa, MASK_10);
msleep(50);
tasklet_kill(&av7110->vpe_tasklet);
- saa7146_pgtable_free(saa->pci, &av7110->pt);
+ saa7146_vfree_destroy_pgtable(saa->pci, av7110->grabbing, &av7110->pt);
}
av7110_exit_v4l(av7110);
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 4ed4599..9d42f88 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -904,7 +904,7 @@
band = 1;
} else if (tuner_frequency < 200000000) {
cp = 6;
- band = 2;
+ band = 1;
} else if (tuner_frequency < 290000000) {
cp = 3;
band = 2;
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index 6b97dc1..2557ac9 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -195,6 +195,9 @@
u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
u32 count;
+ /* Ensure streamed PCI data is synced to CPU */
+ pci_dma_sync_sg_for_cpu(budget->dev->pci, budget->pt.slist, budget->pt.nents, PCI_DMA_FROMDEVICE);
+
/* nearest lower position divisible by 188 */
newdma -= newdma % 188;
@@ -504,16 +507,16 @@
strcpy(budget->i2c_adap.name, budget->card->name);
if (i2c_add_adapter(&budget->i2c_adap) < 0) {
- dvb_unregister_adapter(&budget->dvb_adapter);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_dvb_unregister;
}
ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac);
- if (NULL ==
- (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt))) {
+ budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt);
+ if (NULL == budget->grabbing) {
ret = -ENOMEM;
- goto err;
+ goto err_del_i2c;
}
saa7146_write(dev, PCI_BT_V1, 0x001c0000);
@@ -526,14 +529,16 @@
if (bi->type != BUDGET_FS_ACTIVY)
saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
- if (budget_register(budget) == 0) {
- return 0;
- }
-err:
+ if (budget_register(budget) == 0)
+ return 0; /* Everything OK */
+
+ /* An error occurred, cleanup resources */
+ saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt);
+
+err_del_i2c:
i2c_del_adapter(&budget->i2c_adap);
- vfree(budget->grabbing);
-
+err_dvb_unregister:
dvb_unregister_adapter(&budget->dvb_adapter);
return ret;
@@ -555,16 +560,14 @@
budget_unregister(budget);
+ tasklet_kill(&budget->vpe_tasklet);
+
+ saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt);
+
i2c_del_adapter(&budget->i2c_adap);
dvb_unregister_adapter(&budget->dvb_adapter);
- tasklet_kill(&budget->vpe_tasklet);
-
- saa7146_pgtable_free(dev->pci, &budget->pt);
-
- vfree(budget->grabbing);
-
return 0;
}
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index af66a5d..a6ac82a 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -2,8 +2,14 @@
# Multimedia Video device configuration
#
-menu "Radio Adapters"
+menuconfig RADIO_ADAPTERS
+ bool "Radio Adapters"
depends on VIDEO_DEV
+ default y
+ ---help---
+ Say Y here to enable selecting AM/FM radio adapters.
+
+if RADIO_ADAPTERS
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
@@ -328,4 +334,5 @@
To compile this driver as a module, choose M here: the
module will be called dsbr100.
-endmenu
+
+endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 449df1b..3bd07f7 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -33,6 +33,10 @@
History:
+ Version 0.42:
+ Converted dsbr100 to use video_ioctl2
+ by Douglas Landgraf <dougsland@gmail.com>
+
Version 0.41-ac1:
Alan Cox: Some cleanups and fixes
@@ -121,8 +125,6 @@
static int usb_dsbr100_probe(struct usb_interface *intf,
const struct usb_device_id *id);
static void usb_dsbr100_disconnect(struct usb_interface *intf);
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
static int usb_dsbr100_open(struct inode *inode, struct file *file);
static int usb_dsbr100_close(struct inode *inode, struct file *file);
@@ -142,26 +144,6 @@
};
-/* File system interface */
-static const struct file_operations usb_dsbr100_fops = {
- .owner = THIS_MODULE,
- .open = usb_dsbr100_open,
- .release = usb_dsbr100_close,
- .ioctl = usb_dsbr100_ioctl,
- .compat_ioctl = v4l_compat_ioctl32,
- .llseek = no_llseek,
-};
-
-/* V4L interface */
-static struct video_device dsbr100_videodev_template=
-{
- .owner = THIS_MODULE,
- .name = "D-Link DSB-R 100",
- .type = VID_TYPE_TUNER,
- .fops = &usb_dsbr100_fops,
- .release = video_device_release,
-};
-
static struct usb_device_id usb_dsbr100_device_table [] = {
{ USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
{ } /* Terminating entry */
@@ -252,37 +234,6 @@
/* USB subsystem interface begins here */
-/* check if the device is present and register with v4l and
-usb if it is */
-static int usb_dsbr100_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct dsbr100_device *radio;
-
- if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL)))
- return -ENOMEM;
- if (!(radio->videodev = video_device_alloc())) {
- kfree(radio);
- return -ENOMEM;
- }
- memcpy(radio->videodev, &dsbr100_videodev_template,
- sizeof(dsbr100_videodev_template));
- radio->removed = 0;
- radio->users = 0;
- radio->usbdev = interface_to_usbdev(intf);
- radio->curfreq = FREQ_MIN*FREQ_MUL;
- video_set_drvdata(radio->videodev, radio);
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
- radio_nr)) {
- warn("Could not register video device");
- video_device_release(radio->videodev);
- kfree(radio);
- return -EIO;
- }
- usb_set_intfdata(intf, radio);
- return 0;
-}
-
/* handle unplugging of the device, release data structures
if nothing keeps us from doing it. If something is still
keeping us busy, the release callback of v4l will take care
@@ -307,133 +258,147 @@
}
-/* Video for Linux interface */
-
-static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *v)
{
- struct dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- if (!radio)
- return -EIO;
-
- switch(cmd) {
- case VIDIOC_QUERYCAP:
- {
- struct v4l2_capability *v = arg;
- memset(v,0,sizeof(*v));
- strlcpy(v->driver, "dsbr100", sizeof (v->driver));
- strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof (v->card));
- sprintf(v->bus_info,"ISA");
- v->version = RADIO_VERSION;
- v->capabilities = V4L2_CAP_TUNER;
-
- return 0;
- }
- case VIDIOC_G_TUNER:
- {
- struct v4l2_tuner *v = arg;
-
- if (v->index > 0)
- return -EINVAL;
-
- dsbr100_getstat(radio);
-
- memset(v,0,sizeof(*v));
- strcpy(v->name, "FM");
- v->type = V4L2_TUNER_RADIO;
-
- v->rangelow = FREQ_MIN*FREQ_MUL;
- v->rangehigh = FREQ_MAX*FREQ_MUL;
- v->rxsubchans =V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
- v->capability=V4L2_TUNER_CAP_LOW;
- if(radio->stereo)
- v->audmode = V4L2_TUNER_MODE_STEREO;
- else
- v->audmode = V4L2_TUNER_MODE_MONO;
- v->signal = 0xFFFF; /* We can't get the signal strength */
-
- return 0;
- }
- case VIDIOC_S_TUNER:
- {
- struct v4l2_tuner *v = arg;
-
- if (v->index > 0)
- return -EINVAL;
-
- return 0;
- }
- case VIDIOC_S_FREQUENCY:
- {
- struct v4l2_frequency *f = arg;
-
- radio->curfreq = f->frequency;
- if (dsbr100_setfreq(radio, radio->curfreq)==-1)
- warn("Set frequency failed");
- return 0;
- }
- case VIDIOC_G_FREQUENCY:
- {
- struct v4l2_frequency *f = arg;
-
- f->type = V4L2_TUNER_RADIO;
- f->frequency = radio->curfreq;
-
- return 0;
- }
- case VIDIOC_QUERYCTRL:
- {
- struct v4l2_queryctrl *qc = arg;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
- if (qc->id && qc->id == radio_qctrl[i].id) {
- memcpy(qc, &(radio_qctrl[i]),
- sizeof(*qc));
- return 0;
- }
- }
- return -EINVAL;
- }
- case VIDIOC_G_CTRL:
- {
- struct v4l2_control *ctrl= arg;
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- ctrl->value=radio->muted;
- return 0;
- }
- return -EINVAL;
- }
- case VIDIOC_S_CTRL:
- {
- struct v4l2_control *ctrl= arg;
-
- switch (ctrl->id) {
- case V4L2_CID_AUDIO_MUTE:
- if (ctrl->value) {
- if (dsbr100_stop(radio)==-1)
- warn("Radio did not respond properly");
- } else {
- if (dsbr100_start(radio)==-1)
- warn("Radio did not respond properly");
- }
- return 0;
- }
- return -EINVAL;
- }
- default:
- return v4l_compat_translate_ioctl(inode,file,cmd,arg,
- usb_dsbr100_do_ioctl);
- }
+ strlcpy(v->driver, "dsbr100", sizeof(v->driver));
+ strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card));
+ sprintf(v->bus_info, "ISA");
+ v->version = RADIO_VERSION;
+ v->capabilities = V4L2_CAP_TUNER;
+ return 0;
}
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int vidioc_g_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *v)
{
- return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
+ struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
+
+ if (v->index > 0)
+ return -EINVAL;
+
+ dsbr100_getstat(radio);
+ strcpy(v->name, "FM");
+ v->type = V4L2_TUNER_RADIO;
+ v->rangelow = FREQ_MIN*FREQ_MUL;
+ v->rangehigh = FREQ_MAX*FREQ_MUL;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
+ v->capability = V4L2_TUNER_CAP_LOW;
+ if(radio->stereo)
+ v->audmode = V4L2_TUNER_MODE_STEREO;
+ else
+ v->audmode = V4L2_TUNER_MODE_MONO;
+ v->signal = 0xffff; /* We can't get the signal strength */
+ return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *v)
+{
+ if (v->index > 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
+
+ radio->curfreq = f->frequency;
+ if (dsbr100_setfreq(radio, radio->curfreq)==-1)
+ warn("Set frequency failed");
+ return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
+
+ f->type = V4L2_TUNER_RADIO;
+ f->frequency = radio->curfreq;
+ return 0;
+}
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
+ if (qc->id && qc->id == radio_qctrl[i].id) {
+ memcpy(qc, &(radio_qctrl[i]),
+ sizeof(*qc));
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ ctrl->value = radio->muted;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_MUTE:
+ if (ctrl->value) {
+ if (dsbr100_stop(radio)==-1)
+ warn("Radio did not respond properly");
+ } else {
+ if (dsbr100_start(radio)==-1)
+ warn("Radio did not respond properly");
+ }
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ if (a->index > 1)
+ return -EINVAL;
+
+ strcpy(a->name, "Radio");
+ a->capability = V4L2_AUDCAP_STEREO;
+ return 0;
+}
+
+static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+ if (i != 0)
+ return -EINVAL;
+ return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ if (a->index != 0)
+ return -EINVAL;
+ return 0;
}
static int usb_dsbr100_open(struct inode *inode, struct file *file)
@@ -465,6 +430,68 @@
return 0;
}
+/* File system interface */
+static const struct file_operations usb_dsbr100_fops = {
+ .owner = THIS_MODULE,
+ .open = usb_dsbr100_open,
+ .release = usb_dsbr100_close,
+ .ioctl = video_ioctl2,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .llseek = no_llseek,
+};
+
+/* V4L2 interface */
+static struct video_device dsbr100_videodev_template =
+{
+ .owner = THIS_MODULE,
+ .name = "D-Link DSB-R 100",
+ .type = VID_TYPE_TUNER,
+ .fops = &usb_dsbr100_fops,
+ .release = video_device_release,
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+};
+
+/* check if the device is present and register with v4l and
+usb if it is */
+static int usb_dsbr100_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dsbr100_device *radio;
+
+ if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL)))
+ return -ENOMEM;
+ if (!(radio->videodev = video_device_alloc())) {
+ kfree(radio);
+ return -ENOMEM;
+ }
+ memcpy(radio->videodev, &dsbr100_videodev_template,
+ sizeof(dsbr100_videodev_template));
+ radio->removed = 0;
+ radio->users = 0;
+ radio->usbdev = interface_to_usbdev(intf);
+ radio->curfreq = FREQ_MIN*FREQ_MUL;
+ video_set_drvdata(radio->videodev, radio);
+ if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
+ warn("Could not register video device");
+ video_device_release(radio->videodev);
+ kfree(radio);
+ return -EIO;
+ }
+ usb_set_intfdata(intf, radio);
+ return 0;
+}
+
static int __init dsbr100_init(void)
{
int retval = usb_register(&usb_dsbr100_driver);
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 8fbf0d8..8cf2e9d 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -48,6 +48,25 @@
#define CADET_VERSION KERNEL_VERSION(0,3,3)
+static struct v4l2_queryctrl radio_qctrl[] = {
+ {
+ .id = V4L2_CID_AUDIO_MUTE,
+ .name = "Mute",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 1,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ },{
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+ .default_value = 0xff,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ }
+};
+
static int io=-1; /* default to isapnp activation */
static int radio_nr = -1;
static int users=0;
@@ -347,135 +366,165 @@
}
-
-static int cadet_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
+static int vidioc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *v)
{
- switch(cmd)
- {
- case VIDIOC_QUERYCAP:
- {
- struct v4l2_capability *cap = arg;
- memset(cap,0,sizeof(*cap));
- cap->capabilities =
- V4L2_CAP_TUNER |
- V4L2_CAP_READWRITE;
- cap->version = CADET_VERSION;
- strcpy(cap->driver, "ADS Cadet");
- strcpy(cap->card, "ADS Cadet");
- return 0;
- }
- case VIDIOC_G_TUNER:
- {
- struct v4l2_tuner *t = arg;
- memset(t,0,sizeof(*t));
- t->type = V4L2_TUNER_RADIO;
- switch (t->index)
- {
- case 0: strcpy(t->name, "FM");
- t->capability = V4L2_TUNER_CAP_STEREO;
- t->rangelow = 1400; /* 87.5 MHz */
- t->rangehigh = 1728; /* 108.0 MHz */
- t->rxsubchans=cadet_getstereo();
- switch (t->rxsubchans){
- case V4L2_TUNER_SUB_MONO:
- t->audmode = V4L2_TUNER_MODE_MONO;
- break;
- case V4L2_TUNER_SUB_STEREO:
- t->audmode = V4L2_TUNER_MODE_STEREO;
- break;
- default: ;
- }
- break;
- case 1: strcpy(t->name, "AM");
- t->capability = V4L2_TUNER_CAP_LOW;
- t->rangelow = 8320; /* 520 kHz */
- t->rangehigh = 26400; /* 1650 kHz */
- t->rxsubchans = V4L2_TUNER_SUB_MONO;
- t->audmode = V4L2_TUNER_MODE_MONO;
- break;
- default:
- return -EINVAL;
- }
-
- t->signal = sigstrength; /* We might need to modify scaling of this */
- return 0;
- }
- case VIDIOC_S_TUNER:
- {
- struct v4l2_tuner *t = arg;
- if((t->index != 0)&&(t->index != 1))
- return -EINVAL;
-
- curtuner = t->index;
- return 0;
- }
- case VIDIOC_G_FREQUENCY:
- {
- struct v4l2_frequency *f = arg;
- memset(f,0,sizeof(*f));
- f->tuner = curtuner;
- f->type = V4L2_TUNER_RADIO;
- f->frequency = cadet_getfreq();
- return 0;
- }
- case VIDIOC_S_FREQUENCY:
- {
- struct v4l2_frequency *f = arg;
- if (f->type != V4L2_TUNER_RADIO){
- return -EINVAL;
- }
- if((curtuner==0)&&((f->frequency<1400)||(f->frequency>1728))) {
- return -EINVAL;
- }
- if((curtuner==1)&&((f->frequency<8320)||(f->frequency>26400))) {
- return -EINVAL;
- }
- cadet_setfreq(f->frequency);
- return 0;
- }
- case VIDIOC_G_CTRL:
- {
- struct v4l2_control *c = arg;
- switch (c->id){
- case V4L2_CID_AUDIO_MUTE: /* TODO: Handle this correctly */
- c->value = (cadet_getvol() == 0);
- break;
- case V4L2_CID_AUDIO_VOLUME:
- c->value = cadet_getvol();
- break;
- default:
- return -EINVAL;
- }
- return 0;
- }
- case VIDIOC_S_CTRL:
- {
- struct v4l2_control *c = arg;
- switch (c->id){
- case V4L2_CID_AUDIO_MUTE: /* TODO: Handle this correctly */
- if (c->value) cadet_setvol(0);
- else cadet_setvol(0xffff);
- break;
- case V4L2_CID_AUDIO_VOLUME:
- cadet_setvol(c->value);
- break;
- default:
- return -EINVAL;
- }
- return 0;
- }
-
- default:
- return -ENOIOCTLCMD;
- }
+ v->capabilities =
+ V4L2_CAP_TUNER |
+ V4L2_CAP_READWRITE;
+ v->version = CADET_VERSION;
+ strcpy(v->driver, "ADS Cadet");
+ strcpy(v->card, "ADS Cadet");
+ return 0;
}
-static int
-cadet_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int vidioc_g_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *v)
{
- return video_usercopy(inode, file, cmd, arg, cadet_do_ioctl);
+ v->type = V4L2_TUNER_RADIO;
+ switch (v->index) {
+ case 0:
+ strcpy(v->name, "FM");
+ v->capability = V4L2_TUNER_CAP_STEREO;
+ v->rangelow = 1400; /* 87.5 MHz */
+ v->rangehigh = 1728; /* 108.0 MHz */
+ v->rxsubchans=cadet_getstereo();
+ switch (v->rxsubchans){
+ case V4L2_TUNER_SUB_MONO:
+ v->audmode = V4L2_TUNER_MODE_MONO;
+ break;
+ case V4L2_TUNER_SUB_STEREO:
+ v->audmode = V4L2_TUNER_MODE_STEREO;
+ break;
+ default: ;
+ }
+ break;
+ case 1:
+ strcpy(v->name, "AM");
+ v->capability = V4L2_TUNER_CAP_LOW;
+ v->rangelow = 8320; /* 520 kHz */
+ v->rangehigh = 26400; /* 1650 kHz */
+ v->rxsubchans = V4L2_TUNER_SUB_MONO;
+ v->audmode = V4L2_TUNER_MODE_MONO;
+ break;
+ default:
+ return -EINVAL;
+ }
+ v->signal = sigstrength; /* We might need to modify scaling of this */
+ return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *v)
+{
+ if((v->index != 0)&&(v->index != 1))
+ return -EINVAL;
+ curtuner = v->index;
+ return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ f->tuner = curtuner;
+ f->type = V4L2_TUNER_RADIO;
+ f->frequency = cadet_getfreq();
+ return 0;
+}
+
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ if (f->type != V4L2_TUNER_RADIO)
+ return -EINVAL;
+ if((curtuner==0)&&((f->frequency<1400)||(f->frequency>1728)))
+ return -EINVAL;
+ if((curtuner==1)&&((f->frequency<8320)||(f->frequency>26400)))
+ return -EINVAL;
+ cadet_setfreq(f->frequency);
+ return 0;
+}
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
+ if (qc->id && qc->id == radio_qctrl[i].id) {
+ memcpy(qc, &(radio_qctrl[i]),
+ sizeof(*qc));
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ switch (ctrl->id){
+ case V4L2_CID_AUDIO_MUTE: /* TODO: Handle this correctly */
+ ctrl->value = (cadet_getvol() == 0);
+ break;
+ case V4L2_CID_AUDIO_VOLUME:
+ ctrl->value = cadet_getvol();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ switch (ctrl->id){
+ case V4L2_CID_AUDIO_MUTE: /* TODO: Handle this correctly */
+ if (ctrl->value)
+ cadet_setvol(0);
+ else
+ cadet_setvol(0xffff);
+ break;
+ case V4L2_CID_AUDIO_VOLUME:
+ cadet_setvol(ctrl->value);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ if (a->index > 1)
+ return -EINVAL;
+ strcpy(a->name, "Radio");
+ a->capability = V4L2_AUDCAP_STEREO;
+ return 0;
+}
+
+static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+ *i = 0;
+ return 0;
+}
+
+static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+ if (i != 0)
+ return -EINVAL;
+ return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *priv,
+ struct v4l2_audio *a)
+{
+ if (a->index != 0)
+ return -EINVAL;
+ return 0;
}
static int
@@ -512,7 +561,7 @@
.open = cadet_open,
.release = cadet_release,
.read = cadet_read,
- .ioctl = cadet_ioctl,
+ .ioctl = video_ioctl2,
.poll = cadet_poll,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
@@ -524,6 +573,18 @@
.name = "Cadet radio",
.type = VID_TYPE_TUNER,
.fops = &cadet_fops,
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
};
static struct pnp_device_id cadet_pnp_devices[] = {
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 11f80ca..8e33a19 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -24,7 +24,6 @@
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <linux/mutex.h>
#include <linux/pci.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
@@ -110,7 +109,6 @@
muted, /* VIDEO_AUDIO_MUTE */
stereo, /* VIDEO_TUNER_STEREO_ON */
tuned; /* signal strength (0 or 0xffff) */
- struct mutex lock;
};
static u32 radio_bits_get(struct radio_device *dev)
@@ -394,7 +392,6 @@
}
radio_unit->io = pci_resource_start(pdev, 0) + GPIO_DATA;
- mutex_init(&radio_unit->lock);
maestro_radio_inst = video_device_alloc();
if (maestro_radio_inst == NULL) {
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index a471590..203f437 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -410,7 +410,6 @@
.owner = THIS_MODULE,
.name = "Zoltrix Radio Plus",
.type = VID_TYPE_TUNER,
- .hardware = 0,
.fops = &zoltrix_fops,
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bc77378..5cb3f54 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,14 +2,19 @@
# Multimedia Video device configuration
#
-menu "Video Capture Adapters"
+menuconfig VIDEO_CAPTURE_DRIVERS
+ bool "Video capture adapters"
depends on VIDEO_DEV
+ default y
+ ---help---
+ Say Y here to enable selecting the video adapters for
+ webcams, analog TV, and hybrid analog/digital TV.
+ Some of those devices also supports FM radio.
-comment "Video Capture Adapters"
+if VIDEO_CAPTURE_DRIVERS
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
- depends on VIDEO_DEV
default n
---help---
Say Y here to enable advanced debugging functionality on some
@@ -34,7 +39,7 @@
#
menu "Encoders/decoders and other helper chips"
- depends on VIDEO_DEV && !VIDEO_HELPER_CHIPS_AUTO
+ depends on !VIDEO_HELPER_CHIPS_AUTO
comment "Audio decoders"
@@ -61,7 +66,7 @@
config VIDEO_TDA9840
tristate "Philips TDA9840 audio processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C
---help---
Support for tda9840 audio decoder chip found on some Zoran boards.
@@ -79,7 +84,7 @@
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C
---help---
Support for tea6415c audio decoder chip found on some bt8xx boards.
@@ -88,7 +93,7 @@
config VIDEO_TEA6420
tristate "Philips TEA6420 audio processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C
---help---
Support for tea6420 audio decoder chip found on some bt8xx boards.
@@ -469,7 +474,7 @@
config VIDEO_SAA5249
tristate "SAA5249 Teletext processor"
- depends on VIDEO_DEV && I2C && VIDEO_V4L2
+ depends on I2C && VIDEO_V4L2
help
Support for I2C bus based teletext using the SAA5249 chip. At the
moment this is only useful on some European WinTV cards.
@@ -479,7 +484,7 @@
config TUNER_3036
tristate "SAB3036 tuner"
- depends on VIDEO_DEV && I2C && VIDEO_V4L1
+ depends on I2C && VIDEO_V4L1
help
Say Y here to include support for Philips SAB3036 compatible tuners.
If in doubt, say N.
@@ -681,8 +686,12 @@
# USB Multimedia device configuration
#
-menu "V4L USB devices"
- depends on USB && VIDEO_DEV
+menuconfig V4L_USB_DRIVERS
+ bool "V4L USB devices"
+ depends on USB
+ default y
+
+if V4L_USB_DRIVERS
source "drivers/media/video/pvrusb2/Kconfig"
@@ -707,7 +716,7 @@
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
@@ -725,7 +734,7 @@
config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -736,7 +745,7 @@
config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -749,7 +758,7 @@
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
@@ -765,7 +774,7 @@
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
- depends on USB && VIDEO_V4L2
+ depends on VIDEO_V4L2
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
@@ -775,6 +784,6 @@
To compile this driver as a module, choose M here: the
module will be called zr364xx.
-endmenu # V4L USB devices
+endif # V4L_USB_DRIVERS
-endmenu
+endif # VIDEO_CAPTURE_DRIVERS
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 1757a58..67bda9f 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -555,7 +555,7 @@
{
struct v4l2_pix_format *pix;
int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
- int is_pal = !(cx25840_get_v4lstd(client) & V4L2_STD_NTSC);
+ int is_50Hz = !(cx25840_get_v4lstd(client) & V4L2_STD_525_60);
switch (fmt->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
@@ -567,7 +567,7 @@
Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
- Vlines = pix->height + (is_pal ? 4 : 7);
+ Vlines = pix->height + (is_50Hz ? 4 : 7);
if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
(Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index 2ebde2f..543b05e 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -28,6 +28,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <asm/delay.h>
#include "cx88.h"
@@ -612,7 +613,7 @@
}
/* Driver asked for hardware access. */
-int cx8802_request_acquire(struct cx8802_driver *drv)
+static int cx8802_request_acquire(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
@@ -632,7 +633,7 @@
}
/* Driver asked to release hardware. */
-int cx8802_request_release(struct cx8802_driver *drv)
+static int cx8802_request_release(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b94ef8a..98fa354 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -36,6 +36,7 @@
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/dma-mapping.h>
#include <asm/div64.h>
#include "cx88.h"
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index 6068c9b..82bc3a2 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -111,10 +111,6 @@
.id = I2C_HW_B_CX2388x,
};
-static struct i2c_client vp3054_i2c_client_template = {
- .name = "VP-3054",
-};
-
int vp3054_i2c_probe(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
@@ -133,8 +129,6 @@
sizeof(vp3054_i2c->adap));
memcpy(&vp3054_i2c->algo, &vp3054_i2c_algo_template,
sizeof(vp3054_i2c->algo));
- memcpy(&vp3054_i2c->client, &vp3054_i2c_client_template,
- sizeof(vp3054_i2c->client));
vp3054_i2c->adap.class |= I2C_CLASS_TV_DIGITAL;
@@ -144,7 +138,6 @@
vp3054_i2c->algo.data = dev;
i2c_set_adapdata(&vp3054_i2c->adap, dev);
vp3054_i2c->adap.algo_data = &vp3054_i2c->algo;
- vp3054_i2c->client.adapter = &vp3054_i2c->adap;
vp3054_bit_setscl(dev,1);
vp3054_bit_setsda(dev,1);
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.h b/drivers/media/video/cx88/cx88-vp3054-i2c.h
index b7a0a04..637a7d2 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.h
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.h
@@ -26,7 +26,6 @@
struct vp3054_i2c_state {
struct i2c_adapter adap;
struct i2c_algo_bit_data algo;
- struct i2c_client client;
u32 state;
};
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 9285a58..3823b62 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_V4L1 && USB && I2C
+ depends on VIDEO_V4L1 && I2C
select VIDEO_BUF
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index c6bff70..664676f 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
config USB_ET61X251
tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on Etoms ET61X151
or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 45b9328..e29f949 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -74,7 +74,7 @@
struct ivtv *ivtv_cards[IVTV_MAX_CARDS];
/* Protects ivtv_cards_active */
-spinlock_t ivtv_cards_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(ivtv_cards_lock);
/* add your revision and whatnot here */
static struct pci_device_id ivtv_pci_tbl[] __devinitdata = {
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index 1637097..8976487 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -804,7 +804,7 @@
struct ivtv_open_id *item;
struct ivtv *itv = NULL;
struct ivtv_stream *s = NULL;
- int minor = MINOR(inode->i_rdev);
+ int minor = iminor(inode);
/* Find which card this open was on */
spin_lock(&ivtv_cards_lock);
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 5645c93..d0c2cd7 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_PVRUSB2
tristate "Hauppauge WinTV-PVR USB2 support"
- depends on VIDEO_V4L2 && USB && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
select FW_LOADER
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
index 5669c8c..20b6144 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
@@ -391,22 +391,29 @@
int pvr2_encoder_configure(struct pvr2_hdw *hdw)
{
int ret;
+ int val;
pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure"
" (cx2341x module)");
hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING;
hdw->enc_ctl_state.width = hdw->res_hor_val;
hdw->enc_ctl_state.height = hdw->res_ver_val;
- hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur &
- (V4L2_STD_NTSC|V4L2_STD_PAL_M)) ?
+ hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & V4L2_STD_525_60) ?
0 : 1);
ret = 0;
ret |= pvr2_encoder_prep_config(hdw);
+ /* saa7115: 0xf0 */
+ val = 0xf0;
+ if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) {
+ /* ivtv cx25840: 0x140 */
+ val = 0x140;
+ }
+
if (!ret) ret = pvr2_encoder_vcmd(
hdw,CX2341X_ENC_SET_NUM_VSYNC_LINES, 2,
- 0xf0, 0xf0);
+ val, val);
/* setup firmware to notify us about some events (don't know why...) */
if (!ret) ret = pvr2_encoder_vcmd(
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index acf651e..1311891 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -83,7 +83,7 @@
};
static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL};
-static DECLARE_MUTEX(pvr2_unit_sem);
+static DEFINE_MUTEX(pvr2_unit_mtx);
static int ctlchg = 0;
static int initusbreset = 1;
@@ -2076,14 +2076,14 @@
hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL);
if (!hdw->ctl_read_urb) goto fail;
- down(&pvr2_unit_sem); do {
+ mutex_lock(&pvr2_unit_mtx); do {
for (idx = 0; idx < PVR_NUM; idx++) {
if (unit_pointers[idx]) continue;
hdw->unit_number = idx;
unit_pointers[idx] = hdw;
break;
}
- } while (0); up(&pvr2_unit_sem);
+ } while (0); mutex_unlock(&pvr2_unit_mtx);
cnt1 = 0;
cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2");
@@ -2186,13 +2186,13 @@
}
pvr2_i2c_core_done(hdw);
pvr2_hdw_remove_usb_stuff(hdw);
- down(&pvr2_unit_sem); do {
+ mutex_lock(&pvr2_unit_mtx); do {
if ((hdw->unit_number >= 0) &&
(hdw->unit_number < PVR_NUM) &&
(unit_pointers[hdw->unit_number] == hdw)) {
unit_pointers[hdw->unit_number] = NULL;
}
- } while (0); up(&pvr2_unit_sem);
+ } while (0); mutex_unlock(&pvr2_unit_mtx);
kfree(hdw->controls);
kfree(hdw->mpeg_ctrl_info);
kfree(hdw->std_defs);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index 58fc3c7..6786d3c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -23,6 +23,7 @@
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-debug.h"
#include "pvrusb2-fx2-cmd.h"
+#include "pvrusb2.h"
#define trace_i2c(...) pvr2_trace(PVR2_TRACE_I2C,__VA_ARGS__)
@@ -38,6 +39,10 @@
module_param(i2c_scan, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
+static int ir_mode[PVR_NUM] = { [0 ... PVR_NUM-1] = 1 };
+module_param_array(ir_mode, int, NULL, 0444);
+MODULE_PARM_DESC(ir_mode,"specify: 0=disable IR reception, 1=normal IR");
+
static unsigned int pvr2_i2c_client_describe(struct pvr2_i2c_client *cp,
unsigned int detail,
char *buf,unsigned int maxlen);
@@ -273,6 +278,15 @@
return pvr2_i2c_basic_op(hdw,i2c_addr,wdata,wlen,rdata,rlen);
}
+/* This is an entry point designed to always fail any attempt to perform a
+ transfer. We use this to cause certain I2C addresses to not be
+ probed. */
+static int i2c_black_hole(struct pvr2_hdw *hdw,
+ u8 i2c_addr,u8 *wdata,u16 wlen,u8 *rdata,u16 rlen)
+{
+ return -EIO;
+}
+
/* This is a special entry point that is entered if an I2C operation is
attempted to a cx25840 chip on model 24xxx hardware. This chip can
sometimes wedge itself. Worse still, when this happens msp3400 can
@@ -994,10 +1008,17 @@
}
/* However, deal with various special cases for 24xxx hardware. */
+ if (ir_mode[hdw->unit_number] == 0) {
+ printk(KERN_INFO "%s: IR disabled\n",hdw->name);
+ hdw->i2c_func[0x18] = i2c_black_hole;
+ } else if (ir_mode[hdw->unit_number] == 1) {
+ if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) {
+ hdw->i2c_func[0x18] = i2c_24xxx_ir;
+ }
+ }
if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) {
hdw->i2c_func[0x1b] = i2c_hack_wm8775;
hdw->i2c_func[0x44] = i2c_hack_cx25840;
- hdw->i2c_func[0x18] = i2c_24xxx_ir;
}
// Configure the adapter and set up everything else related to it.
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index a741c556..7ab79ba 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -518,40 +518,32 @@
}
sfp->item_last = cip;
- cip->attr_name.attr.owner = THIS_MODULE;
cip->attr_name.attr.name = "name";
cip->attr_name.attr.mode = S_IRUGO;
cip->attr_name.show = fp->show_name;
- cip->attr_type.attr.owner = THIS_MODULE;
cip->attr_type.attr.name = "type";
cip->attr_type.attr.mode = S_IRUGO;
cip->attr_type.show = fp->show_type;
- cip->attr_min.attr.owner = THIS_MODULE;
cip->attr_min.attr.name = "min_val";
cip->attr_min.attr.mode = S_IRUGO;
cip->attr_min.show = fp->show_min;
- cip->attr_max.attr.owner = THIS_MODULE;
cip->attr_max.attr.name = "max_val";
cip->attr_max.attr.mode = S_IRUGO;
cip->attr_max.show = fp->show_max;
- cip->attr_val.attr.owner = THIS_MODULE;
cip->attr_val.attr.name = "cur_val";
cip->attr_val.attr.mode = S_IRUGO;
- cip->attr_custom.attr.owner = THIS_MODULE;
cip->attr_custom.attr.name = "custom_val";
cip->attr_custom.attr.mode = S_IRUGO;
- cip->attr_enum.attr.owner = THIS_MODULE;
cip->attr_enum.attr.name = "enum_val";
cip->attr_enum.attr.mode = S_IRUGO;
cip->attr_enum.show = fp->show_enum;
- cip->attr_bits.attr.owner = THIS_MODULE;
cip->attr_bits.attr.name = "bit_val";
cip->attr_bits.attr.mode = S_IRUGO;
cip->attr_bits.show = fp->show_bits;
@@ -616,12 +608,10 @@
dip = kzalloc(sizeof(*dip),GFP_KERNEL);
if (!dip) return;
- dip->attr_debugcmd.attr.owner = THIS_MODULE;
dip->attr_debugcmd.attr.name = "debugcmd";
dip->attr_debugcmd.attr.mode = S_IRUGO|S_IWUSR|S_IWGRP;
dip->attr_debugcmd.show = debugcmd_show;
dip->attr_debugcmd.store = debugcmd_store;
- dip->attr_debuginfo.attr.owner = THIS_MODULE;
dip->attr_debuginfo.attr.name = "debuginfo";
dip->attr_debuginfo.attr.mode = S_IRUGO;
dip->attr_debuginfo.show = debuginfo_show;
@@ -811,7 +801,6 @@
return;
}
- sfp->attr_v4l_minor_number.attr.owner = THIS_MODULE;
sfp->attr_v4l_minor_number.attr.name = "v4l_minor_number";
sfp->attr_v4l_minor_number.attr.mode = S_IRUGO;
sfp->attr_v4l_minor_number.show = v4l_minor_number_show;
@@ -825,7 +814,6 @@
sfp->v4l_minor_number_created_ok = !0;
}
- sfp->attr_v4l_radio_minor_number.attr.owner = THIS_MODULE;
sfp->attr_v4l_radio_minor_number.attr.name = "v4l_radio_minor_number";
sfp->attr_v4l_radio_minor_number.attr.mode = S_IRUGO;
sfp->attr_v4l_radio_minor_number.show = v4l_radio_minor_number_show;
@@ -839,7 +827,6 @@
sfp->v4l_radio_minor_number_created_ok = !0;
}
- sfp->attr_unit_number.attr.owner = THIS_MODULE;
sfp->attr_unit_number.attr.name = "unit_number";
sfp->attr_unit_number.attr.mode = S_IRUGO;
sfp->attr_unit_number.show = unit_number_show;
@@ -852,7 +839,6 @@
sfp->unit_number_created_ok = !0;
}
- sfp->attr_bus_info.attr.owner = THIS_MODULE;
sfp->attr_bus_info.attr.name = "bus_info_str";
sfp->attr_bus_info.attr.mode = S_IRUGO;
sfp->attr_bus_info.show = bus_info_show;
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8fdf710..7298cf2 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
config USB_PWC
tristate "USB Philips Cameras"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 4ea479b..50f15ad 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -1170,6 +1170,42 @@
.amux = LINE2,
},
},
+ [SAA7134_BOARD_ECS_TVP3XP_4CB6] = {
+ /* Barry Scott <barry.scott@onelan.co.uk> */
+ .name = "Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM)",
+ .audio_clock = 0x187de7,
+ .tuner_type = TUNER_PHILIPS_PAL_I,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_tv_mono,
+ .vmux = 1,
+ .amux = LINE2,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ },{
+ .name = "CVid over SVid",
+ .vmux = 0,
+ .amux = LINE1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = LINE2,
+ },
+ },
[SAA7134_BOARD_AVACSSMARTTV] = {
/* Roman Pszonczenko <romka@kolos.math.uni.lodz.pl> */
.name = "AVACS SmartTV",
@@ -2754,6 +2790,35 @@
.amux = LINE1,
},
},
+ [SAA7134_BOARD_KWORLD_DVBT_210] = {
+ .name = "KWorld DVB-T 210",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 1 << 21,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
[SAA7134_BOARD_KWORLD_ATSC110] = {
.name = "Kworld ATSC110",
.audio_clock = 0x00187de7,
@@ -3407,6 +3472,36 @@
.gpio = 0x0200000,
},
},
+ [SAA7134_BOARD_SABRENT_TV_PCB05] = {
+ .name = "Sabrent PCMCIA TV-PCB05",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ },{
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_comp2,
+ .vmux = 0,
+ .amux = LINE1,
+ },{
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ .mute = {
+ .name = name_mute,
+ .amux = TV,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3515,7 +3610,13 @@
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168, /* Animation Technologies (LifeView) */
- .subdevice = 0x0214, /* Standard PCI, LR214WF */
+ .subdevice = 0x0214, /* Standard PCI, LR214 Rev E and earlier (SAA7135) */
+ .driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x5168, /* Animation Technologies (LifeView) */
+ .subdevice = 0x5214, /* Standard PCI, LR214 Rev F onwards (SAA7131) */
.driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
@@ -3689,6 +3790,12 @@
.driver_data = SAA7134_BOARD_ECS_TVP3XP_4CB5,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1019,
+ .subdevice = 0x4cb6,
+ .driver_data = SAA7134_BOARD_ECS_TVP3XP_4CB6,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x12ab,
.subdevice = 0x0800,
@@ -3915,6 +4022,12 @@
.driver_data = SAA7134_BOARD_TEVION_DVBT_220RF,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x17de,
+ .subdevice = 0x7250,
+ .driver_data = SAA7134_BOARD_KWORLD_DVBT_210,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */
.subvendor = 0x17de,
.subdevice = 0x7350,
@@ -4100,6 +4213,12 @@
.subdevice = 0x4857,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x0919, /* SinoVideo PCI 2309 Proteus (7134) */
+ .subdevice = 0x2003, /* OEM cardbus */
+ .driver_data = SAA7134_BOARD_SABRENT_TV_PCB05,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -4178,6 +4297,7 @@
case SAA7134_BOARD_CINERGY600_MK3:
case SAA7134_BOARD_ECS_TVP3XP:
case SAA7134_BOARD_ECS_TVP3XP_4CB5:
+ case SAA7134_BOARD_ECS_TVP3XP_4CB6:
case SAA7134_BOARD_MD2819:
case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
case SAA7134_BOARD_KWORLD_XPERT:
@@ -4426,6 +4546,7 @@
}
break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
+ case SAA7134_BOARD_KWORLD_DVBT_210:
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 65aec88..e0eec80 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -887,6 +887,20 @@
.antenna_switch= 2,
.request_firmware = philips_tda1004x_request_firmware
};
+static struct tda1004x_config kworld_dvb_t_210_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .tuner_config = 2,
+ .antenna_switch= 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
@@ -1039,6 +1053,9 @@
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
+ case SAA7134_BOARD_KWORLD_DVBT_210:
+ configure_tda827x_fe(dev, &kworld_dvb_t_210_config);
+ break;
case SAA7134_BOARD_PHILIPS_TIGER:
configure_tda827x_fe(dev, &philips_tiger_config);
break;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 62224cc..15623b2 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -235,6 +235,9 @@
#define SAA7134_BOARD_AVERMEDIA_M102 110
#define SAA7134_BOARD_ASUS_P7131_4871 111
#define SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA 112
+#define SAA7134_BOARD_ECS_TVP3XP_4CB6 113
+#define SAA7134_BOARD_KWORLD_DVBT_210 114
+#define SAA7134_BOARD_SABRENT_TV_PCB05 115
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 19204f5..f71f272 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
config USB_SN9C102
tristate "USB SN9C1xx PC Camera Controller support"
- depends on USB && VIDEO_V4L2
+ depends on VIDEO_V4L2
---help---
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102, SN9C103, SN9C105 and SN9C120 PC Camera Controllers.
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
index 680e746..11fcb49 100644
--- a/drivers/media/video/sn9c102/sn9c102.h
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -141,7 +141,7 @@
void
sn9c102_attach_sensor(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor)
+ const struct sn9c102_sensor* sensor)
{
memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor));
}
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 89f8335..74a204f 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -48,8 +48,8 @@
#define SN9C102_MODULE_AUTHOR "(C) 2004-2007 Luca Risolia"
#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define SN9C102_MODULE_LICENSE "GPL"
-#define SN9C102_MODULE_VERSION "1:1.39"
-#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 39)
+#define SN9C102_MODULE_VERSION "1:1.44"
+#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 44)
/*****************************************************************************/
@@ -209,38 +209,41 @@
}
/*****************************************************************************/
+
/*
- * Write a sequence of count value/register pairs. Returns -1 after the
- * first failed write, or 0 for no errors.
- */
+ Write a sequence of count value/register pairs. Returns -1 after the first
+ failed write, or 0 for no errors.
+*/
int sn9c102_write_regs(struct sn9c102_device* cam, const u8 valreg[][2],
int count)
{
struct usb_device* udev = cam->usbdev;
- u8* value = cam->control_buffer; /* Needed for DMA'able memory */
+ u8* buff = cam->control_buffer;
int i, res;
for (i = 0; i < count; i++) {
u8 index = valreg[i][1];
/*
- * index is a u8, so it must be <256 and can't be out of range.
- * If we put in a check anyway, gcc annoys us with a warning
- * that our check is useless. People get all uppity when they
- * see warnings in the kernel compile.
- */
+ index is a u8, so it must be <256 and can't be out of range.
+ If we put in a check anyway, gcc annoys us with a warning
+ hat our check is useless. People get all uppity when they
+ see warnings in the kernel compile.
+ */
- *value = valreg[i][0];
- res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x08, 0x41, index, 0,
- value, 1, SN9C102_CTRL_TIMEOUT);
+ *buff = valreg[i][0];
+
+ res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08,
+ 0x41, index, 0, buff, 1,
+ SN9C102_CTRL_TIMEOUT);
+
if (res < 0) {
DBG(3, "Failed to write a register (value 0x%02X, "
- "index 0x%02X, error %d)", *value, index, res);
+ "index 0x%02X, error %d)", *buff, index, res);
return -1;
}
- cam->reg[index] = *value;
+ cam->reg[index] = *buff;
}
return 0;
@@ -272,8 +275,8 @@
}
-/* NOTE: reading some registers always returns 0 */
-static int sn9c102_read_reg(struct sn9c102_device* cam, u16 index)
+/* NOTE: with the SN9C10[123] reading some registers always returns 0 */
+int sn9c102_read_reg(struct sn9c102_device* cam, u16 index)
{
struct usb_device* udev = cam->usbdev;
u8* buff = cam->control_buffer;
@@ -299,7 +302,8 @@
static int
-sn9c102_i2c_wait(struct sn9c102_device* cam, struct sn9c102_sensor* sensor)
+sn9c102_i2c_wait(struct sn9c102_device* cam,
+ const struct sn9c102_sensor* sensor)
{
int i, r;
@@ -320,7 +324,7 @@
static int
sn9c102_i2c_detect_read_error(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor)
+ const struct sn9c102_sensor* sensor)
{
int r , err = 0;
@@ -342,7 +346,7 @@
static int
sn9c102_i2c_detect_write_error(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor)
+ const struct sn9c102_sensor* sensor)
{
int r;
r = sn9c102_read_reg(cam, 0x08);
@@ -352,12 +356,12 @@
int
sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 data0, u8 data1,
- u8 n, u8 buffer[])
+ const struct sn9c102_sensor* sensor, u8 data0,
+ u8 data1, u8 n, u8 buffer[])
{
struct usb_device* udev = cam->usbdev;
u8* data = cam->control_buffer;
- int err = 0, res;
+ int i = 0, err = 0, res;
/* Write cycle */
data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
@@ -402,7 +406,8 @@
}
if (buffer)
- memcpy(buffer, data, sizeof(buffer));
+ for (i = 0; i < n && i < 5; i++)
+ buffer[n-i-1] = data[4-i];
return (int)data[4];
}
@@ -410,7 +415,7 @@
int
sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 n, u8 data0,
+ const struct sn9c102_sensor* sensor, u8 n, u8 data0,
u8 data1, u8 data2, u8 data3, u8 data4, u8 data5)
{
struct usb_device* udev = cam->usbdev;
@@ -449,7 +454,7 @@
int
sn9c102_i2c_try_read(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 address)
+ const struct sn9c102_sensor* sensor, u8 address)
{
return sn9c102_i2c_try_raw_read(cam, sensor, sensor->i2c_slave_id,
address, 1, NULL);
@@ -458,7 +463,7 @@
int
sn9c102_i2c_try_write(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 address, u8 value)
+ const struct sn9c102_sensor* sensor, u8 address, u8 value)
{
return sn9c102_i2c_try_raw_write(cam, sensor, 3,
sensor->i2c_slave_id, address,
@@ -657,16 +662,6 @@
}
-static void
-sn9c102_write_eoimarker(struct sn9c102_device* cam, struct sn9c102_frame_t* f)
-{
- static const u8 eoi_marker[2] = {0xff, 0xd9};
-
- memcpy(f->bufmem + f->buf.bytesused, eoi_marker, sizeof(eoi_marker));
- f->buf.bytesused += sizeof(eoi_marker);
-}
-
-
static void sn9c102_urb_complete(struct urb *urb)
{
struct sn9c102_device* cam = urb->context;
@@ -3181,14 +3176,14 @@
static const struct file_operations sn9c102_fops = {
.owner = THIS_MODULE,
- .open = sn9c102_open,
+ .open = sn9c102_open,
.release = sn9c102_release,
- .ioctl = sn9c102_ioctl,
+ .ioctl = sn9c102_ioctl,
.compat_ioctl = v4l_compat_ioctl32,
- .read = sn9c102_read,
- .poll = sn9c102_poll,
- .mmap = sn9c102_mmap,
- .llseek = no_llseek,
+ .read = sn9c102_read,
+ .poll = sn9c102_poll,
+ .mmap = sn9c102_mmap,
+ .llseek = no_llseek,
};
/*****************************************************************************/
@@ -3251,7 +3246,7 @@
break;
}
- for (i = 0; sn9c102_sensor_table[i]; i++) {
+ for (i = 0; i < ARRAY_SIZE(sn9c102_sensor_table); i++) {
err = sn9c102_sensor_table[i](cam);
if (!err)
break;
@@ -3262,7 +3257,7 @@
DBG(3, "Support for %s maintained by %s",
cam->sensor.name, cam->sensor.maintainer);
} else {
- DBG(1, "No supported image sensor detected");
+ DBG(1, "No supported image sensor detected for this bridge");
err = -ENODEV;
goto fail;
}
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index f49bd8c..916054f 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -86,6 +86,8 @@
{ SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), },
/* SN9C105 */
+ { SN9C102_USB_DEVICE(0x045e, 0x00f5, BRIDGE_SN9C105), },
+ { SN9C102_USB_DEVICE(0x045e, 0x00f7, BRIDGE_SN9C105), },
{ SN9C102_USB_DEVICE(0x0471, 0x0327, BRIDGE_SN9C105), },
{ SN9C102_USB_DEVICE(0x0471, 0x0328, BRIDGE_SN9C105), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60c0, BRIDGE_SN9C105), },
@@ -100,6 +102,7 @@
{ SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), },
/* SN9C120 */
+ { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), },
@@ -148,7 +151,6 @@
&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */
&sn9c102_probe_tas5110d, /* detection based on USB pid/vid */
&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */
- NULL,
};
#endif /* _SN9C102_DEVTABLE_H_ */
diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c
index 28a861a..eaf9ad0 100644
--- a/drivers/media/video/sn9c102/sn9c102_hv7131d.c
+++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c
@@ -144,7 +144,7 @@
}
-static struct sn9c102_sensor hv7131d = {
+static const struct sn9c102_sensor hv7131d = {
.name = "HV7131D",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
@@ -248,12 +248,10 @@
err = sn9c102_write_const_regs(cam, {0x01, 0x01}, {0x00, 0x01},
{0x28, 0x17});
- if (err)
- return -EIO;
r0 = sn9c102_i2c_try_read(cam, &hv7131d, 0x00);
r1 = sn9c102_i2c_try_read(cam, &hv7131d, 0x01);
- if (r0 < 0 || r1 < 0)
+ if (err || r0 < 0 || r1 < 0)
return -EIO;
if (r0 != 0x00 || r1 != 0x04)
diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131r.c b/drivers/media/video/sn9c102/sn9c102_hv7131r.c
index 5a495ba..0fc4012 100644
--- a/drivers/media/video/sn9c102/sn9c102_hv7131r.c
+++ b/drivers/media/video/sn9c102/sn9c102_hv7131r.c
@@ -44,7 +44,6 @@
{0xb0, 0x2b}, {0xc0, 0x2c},
{0xd0, 0x2d}, {0xe0, 0x2e},
{0xf0, 0x2f}, {0xff, 0x30});
-
break;
case BRIDGE_SN9C105:
case BRIDGE_SN9C120:
@@ -254,7 +253,7 @@
}
-static struct sn9c102_sensor hv7131r = {
+static const struct sn9c102_sensor hv7131r = {
.name = "HV7131R",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C103 | BRIDGE_SN9C105 | BRIDGE_SN9C120,
@@ -350,11 +349,8 @@
{0x34, 0x01}, {0x20, 0x17},
{0x34, 0x01}, {0x46, 0x01});
- if (err)
- return -EIO;
-
devid = sn9c102_i2c_try_read(cam, &hv7131r, 0x00);
- if (devid < 0)
+ if (err || devid < 0)
return -EIO;
if (devid != 0x02)
diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c
index 9200845..00b134c 100644
--- a/drivers/media/video/sn9c102/sn9c102_mi0343.c
+++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c
@@ -55,45 +55,45 @@
struct v4l2_control* ctrl)
{
struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
- u8 data[5+1];
+ u8 data[2];
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x09,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x09, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[2];
+ ctrl->value = data[0];
return 0;
case V4L2_CID_GAIN:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x35,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x35, 2,
+ data) < 0)
return -EIO;
break;
case V4L2_CID_HFLIP:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3] & 0x20 ? 1 : 0;
+ ctrl->value = data[1] & 0x20 ? 1 : 0;
return 0;
case V4L2_CID_VFLIP:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3] & 0x80 ? 1 : 0;
+ ctrl->value = data[1] & 0x80 ? 1 : 0;
return 0;
case V4L2_CID_RED_BALANCE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2d,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2d, 2,
+ data) < 0)
return -EIO;
break;
case V4L2_CID_BLUE_BALANCE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2c,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2c, 2,
+ data) < 0)
return -EIO;
break;
case SN9C102_V4L2_CID_GREEN_BALANCE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2e,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2e, 2,
+ data) < 0)
return -EIO;
break;
default:
@@ -105,7 +105,7 @@
case V4L2_CID_RED_BALANCE:
case V4L2_CID_BLUE_BALANCE:
case SN9C102_V4L2_CID_GREEN_BALANCE:
- ctrl->value = data[3] | (data[2] << 8);
+ ctrl->value = data[1] | (data[0] << 8);
if (ctrl->value >= 0x10 && ctrl->value <= 0x3f)
ctrl->value -= 0x10;
else if (ctrl->value >= 0x60 && ctrl->value <= 0x7f)
@@ -223,7 +223,7 @@
}
-static struct sn9c102_sensor mi0343 = {
+static const struct sn9c102_sensor mi0343 = {
.name = "MI-0343",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
@@ -332,20 +332,17 @@
int sn9c102_probe_mi0343(struct sn9c102_device* cam)
{
- u8 data[5+1];
- int err = 0;
+ u8 data[2];
- err = sn9c102_write_const_regs(cam, {0x01, 0x01}, {0x00, 0x01},
- {0x28, 0x17});
-
- if (err)
+ if (sn9c102_write_const_regs(cam, {0x01, 0x01}, {0x00, 0x01},
+ {0x28, 0x17}))
return -EIO;
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, 0x00,
2, data) < 0)
return -EIO;
- if (data[4] != 0x32 || data[3] != 0xe3)
+ if (data[1] != 0x42 || data[0] != 0xe3)
return -ENODEV;
sn9c102_attach_sensor(cam, &mi0343);
diff --git a/drivers/media/video/sn9c102/sn9c102_mi0360.c b/drivers/media/video/sn9c102/sn9c102_mi0360.c
index 64698ac..f8d81d8 100644
--- a/drivers/media/video/sn9c102/sn9c102_mi0360.c
+++ b/drivers/media/video/sn9c102/sn9c102_mi0360.c
@@ -27,20 +27,105 @@
struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
int err = 0;
- err = sn9c102_write_const_regs(cam, {0x00, 0x10}, {0x00, 0x11},
- {0x0a, 0x14}, {0x40, 0x01},
- {0x20, 0x17}, {0x07, 0x18},
- {0xa0, 0x19}, {0x02, 0x1c},
- {0x03, 0x1d}, {0x0f, 0x1e},
- {0x0c, 0x1f}, {0x00, 0x20},
- {0x10, 0x21}, {0x20, 0x22},
- {0x30, 0x23}, {0x40, 0x24},
- {0x50, 0x25}, {0x60, 0x26},
- {0x70, 0x27}, {0x80, 0x28},
- {0x90, 0x29}, {0xa0, 0x2a},
- {0xb0, 0x2b}, {0xc0, 0x2c},
- {0xd0, 0x2d}, {0xe0, 0x2e},
- {0xf0, 0x2f}, {0xff, 0x30});
+ switch (sn9c102_get_bridge(cam)) {
+ case BRIDGE_SN9C103:
+ err = sn9c102_write_const_regs(cam, {0x00, 0x10}, {0x00, 0x11},
+ {0x0a, 0x14}, {0x40, 0x01},
+ {0x20, 0x17}, {0x07, 0x18},
+ {0xa0, 0x19}, {0x02, 0x1c},
+ {0x03, 0x1d}, {0x0f, 0x1e},
+ {0x0c, 0x1f}, {0x00, 0x20},
+ {0x10, 0x21}, {0x20, 0x22},
+ {0x30, 0x23}, {0x40, 0x24},
+ {0x50, 0x25}, {0x60, 0x26},
+ {0x70, 0x27}, {0x80, 0x28},
+ {0x90, 0x29}, {0xa0, 0x2a},
+ {0xb0, 0x2b}, {0xc0, 0x2c},
+ {0xd0, 0x2d}, {0xe0, 0x2e},
+ {0xf0, 0x2f}, {0xff, 0x30});
+ break;
+ case BRIDGE_SN9C105:
+ case BRIDGE_SN9C120:
+ err = sn9c102_write_const_regs(cam, {0x44, 0x01}, {0x40, 0x02},
+ {0x00, 0x03}, {0x1a, 0x04},
+ {0x50, 0x05}, {0x20, 0x06},
+ {0x10, 0x07}, {0x03, 0x10},
+ {0x08, 0x14}, {0xa2, 0x17},
+ {0x47, 0x18}, {0x00, 0x19},
+ {0x1d, 0x1a}, {0x10, 0x1b},
+ {0x02, 0x1c}, {0x03, 0x1d},
+ {0x0f, 0x1e}, {0x0c, 0x1f},
+ {0x00, 0x20}, {0x29, 0x21},
+ {0x40, 0x22}, {0x54, 0x23},
+ {0x66, 0x24}, {0x76, 0x25},
+ {0x85, 0x26}, {0x94, 0x27},
+ {0xa1, 0x28}, {0xae, 0x29},
+ {0xbb, 0x2a}, {0xc7, 0x2b},
+ {0xd3, 0x2c}, {0xde, 0x2d},
+ {0xea, 0x2e}, {0xf4, 0x2f},
+ {0xff, 0x30}, {0x00, 0x3F},
+ {0xC7, 0x40}, {0x01, 0x41},
+ {0x44, 0x42}, {0x00, 0x43},
+ {0x44, 0x44}, {0x00, 0x45},
+ {0x44, 0x46}, {0x00, 0x47},
+ {0xC7, 0x48}, {0x01, 0x49},
+ {0xC7, 0x4A}, {0x01, 0x4B},
+ {0xC7, 0x4C}, {0x01, 0x4D},
+ {0x44, 0x4E}, {0x00, 0x4F},
+ {0x44, 0x50}, {0x00, 0x51},
+ {0x44, 0x52}, {0x00, 0x53},
+ {0xC7, 0x54}, {0x01, 0x55},
+ {0xC7, 0x56}, {0x01, 0x57},
+ {0xC7, 0x58}, {0x01, 0x59},
+ {0x44, 0x5A}, {0x00, 0x5B},
+ {0x44, 0x5C}, {0x00, 0x5D},
+ {0x44, 0x5E}, {0x00, 0x5F},
+ {0xC7, 0x60}, {0x01, 0x61},
+ {0xC7, 0x62}, {0x01, 0x63},
+ {0xC7, 0x64}, {0x01, 0x65},
+ {0x44, 0x66}, {0x00, 0x67},
+ {0x44, 0x68}, {0x00, 0x69},
+ {0x44, 0x6A}, {0x00, 0x6B},
+ {0xC7, 0x6C}, {0x01, 0x6D},
+ {0xC7, 0x6E}, {0x01, 0x6F},
+ {0xC7, 0x70}, {0x01, 0x71},
+ {0x44, 0x72}, {0x00, 0x73},
+ {0x44, 0x74}, {0x00, 0x75},
+ {0x44, 0x76}, {0x00, 0x77},
+ {0xC7, 0x78}, {0x01, 0x79},
+ {0xC7, 0x7A}, {0x01, 0x7B},
+ {0xC7, 0x7C}, {0x01, 0x7D},
+ {0x44, 0x7E}, {0x00, 0x7F},
+ {0x14, 0x84}, {0x00, 0x85},
+ {0x27, 0x86}, {0x00, 0x87},
+ {0x07, 0x88}, {0x00, 0x89},
+ {0xEC, 0x8A}, {0x0f, 0x8B},
+ {0xD8, 0x8C}, {0x0f, 0x8D},
+ {0x3D, 0x8E}, {0x00, 0x8F},
+ {0x3D, 0x90}, {0x00, 0x91},
+ {0xCD, 0x92}, {0x0f, 0x93},
+ {0xf7, 0x94}, {0x0f, 0x95},
+ {0x0C, 0x96}, {0x00, 0x97},
+ {0x00, 0x98}, {0x66, 0x99},
+ {0x05, 0x9A}, {0x00, 0x9B},
+ {0x04, 0x9C}, {0x00, 0x9D},
+ {0x08, 0x9E}, {0x00, 0x9F},
+ {0x2D, 0xC0}, {0x2D, 0xC1},
+ {0x3A, 0xC2}, {0x05, 0xC3},
+ {0x04, 0xC4}, {0x3F, 0xC5},
+ {0x00, 0xC6}, {0x00, 0xC7},
+ {0x50, 0xC8}, {0x3C, 0xC9},
+ {0x28, 0xCA}, {0xD8, 0xCB},
+ {0x14, 0xCC}, {0xEC, 0xCD},
+ {0x32, 0xCE}, {0xDD, 0xCF},
+ {0x32, 0xD0}, {0xDD, 0xD1},
+ {0x6A, 0xD2}, {0x50, 0xD3},
+ {0x00, 0xD4}, {0x00, 0xD5},
+ {0x00, 0xD6});
+ break;
+ default:
+ break;
+ }
err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x0d,
0x00, 0x01, 0, 0);
@@ -65,50 +150,50 @@
struct v4l2_control* ctrl)
{
struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
- u8 data[5+1];
+ u8 data[2];
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x09,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x09, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[2];
+ ctrl->value = data[0];
return 0;
case V4L2_CID_GAIN:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x35,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x35, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3];
+ ctrl->value = data[1];
return 0;
case V4L2_CID_RED_BALANCE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2c,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2c, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3];
+ ctrl->value = data[1];
return 0;
case V4L2_CID_BLUE_BALANCE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2d,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2d, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3];
+ ctrl->value = data[1];
return 0;
case SN9C102_V4L2_CID_GREEN_BALANCE:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2e,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2e, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3];
+ ctrl->value = data[1];
return 0;
case V4L2_CID_HFLIP:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3] & 0x20 ? 1 : 0;
+ ctrl->value = data[1] & 0x20 ? 1 : 0;
return 0;
case V4L2_CID_VFLIP:
- if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20,
- 2+1, data) < 0)
+ if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20, 2,
+ data) < 0)
return -EIO;
- ctrl->value = data[3] & 0x80 ? 1 : 0;
+ ctrl->value = data[1] & 0x80 ? 1 : 0;
return 0;
default:
return -EINVAL;
@@ -178,8 +263,19 @@
{
struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
int err = 0;
- u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 0,
- v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
+ u8 h_start = 0, v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
+
+ switch (sn9c102_get_bridge(cam)) {
+ case BRIDGE_SN9C103:
+ h_start = (u8)(rect->left - s->cropcap.bounds.left) + 0;
+ break;
+ case BRIDGE_SN9C105:
+ case BRIDGE_SN9C120:
+ h_start = (u8)(rect->left - s->cropcap.bounds.left) + 1;
+ break;
+ default:
+ break;
+ }
err += sn9c102_write_reg(cam, h_start, 0x12);
err += sn9c102_write_reg(cam, v_start, 0x13);
@@ -194,24 +290,30 @@
struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
int err = 0;
- if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) {
- err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
- 0x0a, 0x00, 0x02, 0, 0);
- err += sn9c102_write_reg(cam, 0x20, 0x19);
- } else {
+ if (pix->pixelformat == V4L2_PIX_FMT_SBGGR8) {
err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
0x0a, 0x00, 0x05, 0, 0);
err += sn9c102_write_reg(cam, 0x60, 0x19);
+ if (sn9c102_get_bridge(cam) == BRIDGE_SN9C105 ||
+ sn9c102_get_bridge(cam) == BRIDGE_SN9C120)
+ err += sn9c102_write_reg(cam, 0xa6, 0x17);
+ } else {
+ err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
+ 0x0a, 0x00, 0x02, 0, 0);
+ err += sn9c102_write_reg(cam, 0x20, 0x19);
+ if (sn9c102_get_bridge(cam) == BRIDGE_SN9C105 ||
+ sn9c102_get_bridge(cam) == BRIDGE_SN9C120)
+ err += sn9c102_write_reg(cam, 0xa2, 0x17);
}
return err;
}
-static struct sn9c102_sensor mi0360 = {
+static const struct sn9c102_sensor mi0360 = {
.name = "MI-0360",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
- .supported_bridge = BRIDGE_SN9C103,
+ .supported_bridge = BRIDGE_SN9C103 | BRIDGE_SN9C105 | BRIDGE_SN9C120,
.frequency = SN9C102_I2C_100KHZ,
.interface = SN9C102_I2C_2WIRES,
.i2c_slave_id = 0x5d,
@@ -317,19 +419,31 @@
int sn9c102_probe_mi0360(struct sn9c102_device* cam)
{
- u8 data[5+1];
- int err;
- err = sn9c102_write_const_regs(cam, {0x01, 0x01}, {0x00, 0x01},
- {0x28, 0x17});
- if (err)
- return -EIO;
+ u8 data[2];
+
+ switch (sn9c102_get_bridge(cam)) {
+ case BRIDGE_SN9C103:
+ if (sn9c102_write_const_regs(cam, {0x01, 0x01}, {0x00, 0x01},
+ {0x28, 0x17}))
+ return -EIO;
+ break;
+ case BRIDGE_SN9C105:
+ case BRIDGE_SN9C120:
+ if (sn9c102_write_const_regs(cam, {0x01, 0xf1}, {0x00, 0xf1},
+ {0x01, 0x01}, {0x00, 0x01},
+ {0x28, 0x17}))
+ return -EIO;
+ break;
+ default:
+ break;
+ }
if (sn9c102_i2c_try_raw_read(cam, &mi0360, mi0360.i2c_slave_id, 0x00,
- 2+1, data) < 0)
+ 2, data) < 0)
return -EIO;
- if (data[2] != 0x82 || data[3] != 0x43)
+ if (data[0] != 0x82 || data[1] != 0x43)
return -ENODEV;
sn9c102_attach_sensor(cam, &mi0360);
diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c
index 31b6080..e683234 100644
--- a/drivers/media/video/sn9c102/sn9c102_ov7630.c
+++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c
@@ -29,9 +29,8 @@
switch (sn9c102_get_bridge(cam)) {
case BRIDGE_SN9C101:
case BRIDGE_SN9C102:
- err = sn9c102_write_const_regs(cam, {0x00, 0x14},
- {0x60, 0x17}, {0x0f, 0x18},
- {0x50, 0x19});
+ err = sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17},
+ {0x0f, 0x18}, {0x50, 0x19});
err += sn9c102_i2c_write(cam, 0x12, 0x8d);
err += sn9c102_i2c_write(cam, 0x12, 0x0d);
@@ -61,7 +60,6 @@
err += sn9c102_i2c_write(cam, 0x71, 0x00);
err += sn9c102_i2c_write(cam, 0x74, 0x21);
err += sn9c102_i2c_write(cam, 0x7d, 0xf7);
-
break;
case BRIDGE_SN9C103:
err = sn9c102_write_const_regs(cam, {0x00, 0x02}, {0x00, 0x03},
@@ -253,7 +251,7 @@
}
-static struct sn9c102_sensor ov7630 = {
+static const struct sn9c102_sensor ov7630 = {
.name = "OV7630",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
@@ -408,19 +406,16 @@
switch (sn9c102_get_bridge(cam)) {
case BRIDGE_SN9C101:
case BRIDGE_SN9C102:
- err = sn9c102_write_const_regs(cam, {0x01, 0x01},
- {0x00, 0x01}, {0x28, 0x17});
-
+ err = sn9c102_write_const_regs(cam, {0x01, 0x01}, {0x00, 0x01},
+ {0x28, 0x17});
break;
case BRIDGE_SN9C103: /* do _not_ change anything! */
- err = sn9c102_write_const_regs(cam, {0x09, 0x01},
- {0x42, 0x01}, {0x28, 0x17},
- {0x44, 0x02});
+ err = sn9c102_write_const_regs(cam, {0x09, 0x01}, {0x42, 0x01},
+ {0x28, 0x17}, {0x44, 0x02});
pid = sn9c102_i2c_try_read(cam, &ov7630, 0x0a);
- if (err || pid < 0) { /* try a different initialization */
- err = sn9c102_write_reg(cam, 0x01, 0x01);
- err += sn9c102_write_reg(cam, 0x00, 0x01);
- }
+ if (err || pid < 0) /* try a different initialization */
+ err += sn9c102_write_const_regs(cam, {0x01, 0x01},
+ {0x00, 0x01});
break;
default:
break;
diff --git a/drivers/media/video/sn9c102/sn9c102_ov7660.c b/drivers/media/video/sn9c102/sn9c102_ov7660.c
index c898e94..4b64740 100644
--- a/drivers/media/video/sn9c102/sn9c102_ov7660.c
+++ b/drivers/media/video/sn9c102/sn9c102_ov7660.c
@@ -104,8 +104,8 @@
err += sn9c102_i2c_write(cam, 0x12, 0x80);
err += sn9c102_i2c_write(cam, 0x11, 0x09);
err += sn9c102_i2c_write(cam, 0x00, 0x0A);
- err += sn9c102_i2c_write(cam, 0x01, 0x78);
- err += sn9c102_i2c_write(cam, 0x02, 0x90);
+ err += sn9c102_i2c_write(cam, 0x01, 0x80);
+ err += sn9c102_i2c_write(cam, 0x02, 0x80);
err += sn9c102_i2c_write(cam, 0x03, 0x00);
err += sn9c102_i2c_write(cam, 0x04, 0x00);
err += sn9c102_i2c_write(cam, 0x05, 0x08);
@@ -122,7 +122,7 @@
err += sn9c102_i2c_write(cam, 0x10, 0x20);
err += sn9c102_i2c_write(cam, 0x11, 0x03);
err += sn9c102_i2c_write(cam, 0x12, 0x05);
- err += sn9c102_i2c_write(cam, 0x13, 0xF8);
+ err += sn9c102_i2c_write(cam, 0x13, 0xC7);
err += sn9c102_i2c_write(cam, 0x14, 0x2C);
err += sn9c102_i2c_write(cam, 0x15, 0x00);
err += sn9c102_i2c_write(cam, 0x16, 0x02);
@@ -162,7 +162,7 @@
err += sn9c102_i2c_write(cam, 0x38, 0x02);
err += sn9c102_i2c_write(cam, 0x39, 0x43);
err += sn9c102_i2c_write(cam, 0x3A, 0x00);
- err += sn9c102_i2c_write(cam, 0x3B, 0x02);
+ err += sn9c102_i2c_write(cam, 0x3B, 0x0A);
err += sn9c102_i2c_write(cam, 0x3C, 0x6C);
err += sn9c102_i2c_write(cam, 0x3D, 0x99);
err += sn9c102_i2c_write(cam, 0x3E, 0x0E);
@@ -281,25 +281,34 @@
return -EIO;
break;
case V4L2_CID_DO_WHITE_BALANCE:
- ctrl->value = sn9c102_pread_reg(cam, 0x02);
+ if ((ctrl->value = sn9c102_read_reg(cam, 0x02)) < 0)
+ return -EIO;
ctrl->value = (ctrl->value & 0x04) ? 1 : 0;
break;
case V4L2_CID_RED_BALANCE:
- ctrl->value = sn9c102_pread_reg(cam, 0x05);
+ if ((ctrl->value = sn9c102_read_reg(cam, 0x05)) < 0)
+ return -EIO;
ctrl->value &= 0x7f;
break;
case V4L2_CID_BLUE_BALANCE:
- ctrl->value = sn9c102_pread_reg(cam, 0x06);
+ if ((ctrl->value = sn9c102_read_reg(cam, 0x06)) < 0)
+ return -EIO;
ctrl->value &= 0x7f;
break;
case SN9C102_V4L2_CID_GREEN_BALANCE:
- ctrl->value = sn9c102_pread_reg(cam, 0x07);
+ if ((ctrl->value = sn9c102_read_reg(cam, 0x07)) < 0)
+ return -EIO;
ctrl->value &= 0x7f;
break;
+ case SN9C102_V4L2_CID_BAND_FILTER:
+ if ((ctrl->value = sn9c102_i2c_read(cam, 0x3b)) < 0)
+ return -EIO;
+ ctrl->value &= 0x08;
+ break;
case V4L2_CID_GAIN:
if ((ctrl->value = sn9c102_i2c_read(cam, 0x00)) < 0)
return -EIO;
- ctrl->value &= 0x7f;
+ ctrl->value &= 0x1f;
break;
case V4L2_CID_AUTOGAIN:
if ((ctrl->value = sn9c102_i2c_read(cam, 0x13)) < 0)
@@ -335,12 +344,15 @@
case SN9C102_V4L2_CID_GREEN_BALANCE:
err += sn9c102_write_reg(cam, ctrl->value, 0x07);
break;
+ case SN9C102_V4L2_CID_BAND_FILTER:
+ err += sn9c102_i2c_write(cam, ctrl->value << 3, 0x3b);
+ break;
case V4L2_CID_GAIN:
- err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
+ err += sn9c102_i2c_write(cam, 0x00, 0x60 + ctrl->value);
break;
case V4L2_CID_AUTOGAIN:
- err += sn9c102_i2c_write(cam, 0x13, 0xf0 | ctrl->value |
- (ctrl->value << 1));
+ err += sn9c102_i2c_write(cam, 0x13, 0xc0 |
+ (ctrl->value * 0x07));
break;
default:
return -EINVAL;
@@ -386,7 +398,7 @@
}
-static struct sn9c102_sensor ov7660 = {
+static const struct sn9c102_sensor ov7660 = {
.name = "OV7660",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C105 | BRIDGE_SN9C120,
@@ -401,9 +413,9 @@
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "global gain",
.minimum = 0x00,
- .maximum = 0x7f,
+ .maximum = 0x1f,
.step = 0x01,
- .default_value = 0x0a,
+ .default_value = 0x09,
.flags = 0,
},
{
@@ -413,7 +425,7 @@
.minimum = 0x00,
.maximum = 0xff,
.step = 0x01,
- .default_value = 0x50,
+ .default_value = 0x27,
.flags = 0,
},
{
@@ -433,7 +445,7 @@
.minimum = 0x00,
.maximum = 0x7f,
.step = 0x01,
- .default_value = 0x1f,
+ .default_value = 0x14,
.flags = 0,
},
{
@@ -443,7 +455,7 @@
.minimum = 0x00,
.maximum = 0x7f,
.step = 0x01,
- .default_value = 0x1e,
+ .default_value = 0x14,
.flags = 0,
},
{
@@ -453,7 +465,7 @@
.minimum = 0x00,
.maximum = 0x01,
.step = 0x01,
- .default_value = 0x00,
+ .default_value = 0x01,
.flags = 0,
},
{
@@ -463,7 +475,17 @@
.minimum = 0x00,
.maximum = 0x7f,
.step = 0x01,
- .default_value = 0x20,
+ .default_value = 0x14,
+ .flags = 0,
+ },
+ {
+ .id = SN9C102_V4L2_CID_BAND_FILTER,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "band filter",
+ .minimum = 0x00,
+ .maximum = 0x01,
+ .step = 0x01,
+ .default_value = 0x00,
.flags = 0,
},
},
@@ -508,6 +530,7 @@
return -EIO;
if (pid != 0x76 || ver != 0x60)
return -ENODEV;
+
sn9c102_attach_sensor(cam, &ov7660);
return 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c
index 6715196..360f2a8 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas106b.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c
@@ -163,7 +163,7 @@
}
-static struct sn9c102_sensor pas106b = {
+static const struct sn9c102_sensor pas106b = {
.name = "PAS106B",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
@@ -273,23 +273,21 @@
int sn9c102_probe_pas106b(struct sn9c102_device* cam)
{
- int r0 = 0, r1 = 0, err;
+ int r0 = 0, r1 = 0;
unsigned int pid = 0;
/*
Minimal initialization to enable the I2C communication
NOTE: do NOT change the values!
*/
- err = sn9c102_write_const_regs(cam,
- {0x01, 0x01}, /* sensor power down */
- {0x00, 0x01}, /* sensor power on */
- {0x28, 0x17});/* sensor clock 24 MHz */
- if (err)
+ if (sn9c102_write_const_regs(cam,
+ {0x01, 0x01}, /* sensor power down */
+ {0x00, 0x01}, /* sensor power on */
+ {0x28, 0x17})) /* sensor clock at 24 MHz */
return -EIO;
r0 = sn9c102_i2c_try_read(cam, &pas106b, 0x00);
r1 = sn9c102_i2c_try_read(cam, &pas106b, 0x01);
-
if (r0 < 0 || r1 < 0)
return -EIO;
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
index c1b8d6b..ca4a150 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@@ -35,29 +35,28 @@
switch (sn9c102_get_bridge(cam)) {
case BRIDGE_SN9C101:
case BRIDGE_SN9C102:
- err = sn9c102_write_const_regs(cam, {0x00, 0x10},
- {0x00, 0x11}, {0x00, 0x14},
- {0x20, 0x17}, {0x30, 0x19},
- {0x09, 0x18});
+ err = sn9c102_write_const_regs(cam, {0x00, 0x10}, {0x00, 0x11},
+ {0x00, 0x14}, {0x20, 0x17},
+ {0x30, 0x19}, {0x09, 0x18});
break;
case BRIDGE_SN9C103:
- err = sn9c102_write_const_regs(cam, {0x00, 0x02},
- {0x00, 0x03}, {0x1a, 0x04},
- {0x20, 0x05}, {0x20, 0x06},
- {0x20, 0x07}, {0x00, 0x10},
- {0x00, 0x11}, {0x00, 0x14},
- {0x20, 0x17}, {0x30, 0x19},
- {0x09, 0x18}, {0x02, 0x1c},
- {0x03, 0x1d}, {0x0f, 0x1e},
- {0x0c, 0x1f}, {0x00, 0x20},
- {0x10, 0x21}, {0x20, 0x22},
- {0x30, 0x23}, {0x40, 0x24},
- {0x50, 0x25}, {0x60, 0x26},
- {0x70, 0x27}, {0x80, 0x28},
- {0x90, 0x29}, {0xa0, 0x2a},
- {0xb0, 0x2b}, {0xc0, 0x2c},
- {0xd0, 0x2d}, {0xe0, 0x2e},
- {0xf0, 0x2f}, {0xff, 0x30});
+ err = sn9c102_write_const_regs(cam, {0x00, 0x02}, {0x00, 0x03},
+ {0x1a, 0x04}, {0x20, 0x05},
+ {0x20, 0x06}, {0x20, 0x07},
+ {0x00, 0x10}, {0x00, 0x11},
+ {0x00, 0x14}, {0x20, 0x17},
+ {0x30, 0x19}, {0x09, 0x18},
+ {0x02, 0x1c}, {0x03, 0x1d},
+ {0x0f, 0x1e}, {0x0c, 0x1f},
+ {0x00, 0x20}, {0x10, 0x21},
+ {0x20, 0x22}, {0x30, 0x23},
+ {0x40, 0x24}, {0x50, 0x25},
+ {0x60, 0x26}, {0x70, 0x27},
+ {0x80, 0x28}, {0x90, 0x29},
+ {0xa0, 0x2a}, {0xb0, 0x2b},
+ {0xc0, 0x2c}, {0xd0, 0x2d},
+ {0xe0, 0x2e}, {0xf0, 0x2f},
+ {0xff, 0x30});
break;
default:
break;
@@ -197,7 +196,7 @@
}
-static struct sn9c102_sensor pas202bcb = {
+static const struct sn9c102_sensor pas202bcb = {
.name = "PAS202BCB",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
@@ -313,9 +312,8 @@
{0x28, 0x17});/* clock 24 MHz */
break;
case BRIDGE_SN9C103: /* do _not_ change anything! */
- err = sn9c102_write_const_regs(cam, {0x09, 0x01},
- {0x44, 0x01}, {0x44, 0x02},
- {0x29, 0x17});
+ err = sn9c102_write_const_regs(cam, {0x09, 0x01}, {0x44, 0x01},
+ {0x44, 0x02}, {0x29, 0x17});
break;
default:
break;
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 1bbf64c..2d7d786 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -22,7 +22,7 @@
#define _SN9C102_SENSOR_H_
#include <linux/usb.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
#include <linux/device.h>
#include <linux/stddef.h>
#include <linux/errno.h>
@@ -74,7 +74,7 @@
/* Attach a probed sensor to the camera. */
extern void
sn9c102_attach_sensor(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor);
+ const struct sn9c102_sensor* sensor);
/*
Read/write routines: they always return -1 on error, 0 or the read value
@@ -85,10 +85,11 @@
*/
/* The "try" I2C I/O versions are used when probing the sensor */
-extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*,
- u8 address, u8 value);
-extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*,
- u8 address);
+extern int sn9c102_i2c_try_write(struct sn9c102_device*,
+ const struct sn9c102_sensor*, u8 address,
+ u8 value);
+extern int sn9c102_i2c_try_read(struct sn9c102_device*,
+ const struct sn9c102_sensor*, u8 address);
/*
These must be used if and only if the sensor doesn't implement the standard
@@ -102,29 +103,31 @@
byte.
*/
extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 n,
+ const struct sn9c102_sensor* sensor, u8 n,
u8 data0, u8 data1, u8 data2, u8 data3,
u8 data4, u8 data5);
extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 data0,
- u8 data1, u8 n, u8 buffer[]);
+ const struct sn9c102_sensor* sensor,
+ u8 data0, u8 data1, u8 n, u8 buffer[]);
/* To be used after the sensor struct has been attached to the camera struct */
extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value);
extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
/* I/O on registers in the bridge. Could be used by the sensor methods too */
+extern int sn9c102_read_reg(struct sn9c102_device*, u16 index);
extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2],
int count);
/*
- * Write multiple registers with constant values. For example:
- * sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
- */
-#define sn9c102_write_const_regs(device, data...) \
- ({ const static u8 _data[][2] = {data}; \
- sn9c102_write_regs(device, _data, ARRAY_SIZE(_data)); })
+ Write multiple registers with constant values. For example:
+ sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
+ Register adresses must be < 256.
+*/
+#define sn9c102_write_const_regs(sn9c102_device, data...) \
+ ({ const static u8 _valreg[][2] = {data}; \
+ sn9c102_write_regs(sn9c102_device, _valreg, ARRAY_SIZE(_valreg)); })
/*****************************************************************************/
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
index 0e7ec86..e7d2de2 100644
--- a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
+++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
@@ -88,7 +88,7 @@
}
-static struct sn9c102_sensor tas5110c1b = {
+static const struct sn9c102_sensor tas5110c1b = {
.name = "TAS5110C1B",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110d.c b/drivers/media/video/sn9c102/sn9c102_tas5110d.c
index 83a39e8..d32fdbc 100644
--- a/drivers/media/video/sn9c102/sn9c102_tas5110d.c
+++ b/drivers/media/video/sn9c102/sn9c102_tas5110d.c
@@ -68,7 +68,7 @@
}
-static struct sn9c102_sensor tas5110d = {
+static const struct sn9c102_sensor tas5110d = {
.name = "TAS5110D",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
index 5040650..56fb1d5 100644
--- a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
+++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
@@ -89,7 +89,7 @@
}
-static struct sn9c102_sensor tas5130d1b = {
+static const struct sn9c102_sensor tas5130d1b = {
.name = "TAS5130D1B",
.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index a0fd82b..e4cb99c 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@
config USB_VICAM
tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && VIDEO_V4L1 && EXPERIMENTAL
+ depends on VIDEO_V4L1 && EXPERIMENTAL
select VIDEO_USBVIDEO
---help---
Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV && VIDEO_V4L1
+ depends on VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@
config USB_KONICAWC
tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV && VIDEO_V4L1
+ depends on VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want support for webcams based on a Konica
@@ -39,7 +39,7 @@
config USB_QUICKCAM_MESSENGER
tristate "USB Logitech Quickcam Messenger"
- depends on USB && VIDEO_DEV && VIDEO_V4L1
+ depends on VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y or M here to enable support for the USB Logitech Quickcam
diff --git a/drivers/media/video/usbvision/Kconfig b/drivers/media/video/usbvision/Kconfig
index c43a5d8..fc24ef0 100644
--- a/drivers/media/video/usbvision/Kconfig
+++ b/drivers/media/video/usbvision/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_USBVISION
tristate "USB video devices based on Nogatech NT1003/1004/1005"
- depends on I2C && VIDEO_V4L2 && USB
+ depends on I2C && VIDEO_V4L2
select VIDEO_TUNER
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
---help---
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
index a861e15..ede8543 100644
--- a/drivers/media/video/v4l1-compat.c
+++ b/drivers/media/video/v4l1-compat.c
@@ -127,7 +127,7 @@
/* ----------------------------------------------------------------- */
-static int palette2pixelformat[] = {
+const static unsigned int palette2pixelformat[] = {
[VIDEO_PALETTE_GREY] = V4L2_PIX_FMT_GREY,
[VIDEO_PALETTE_RGB555] = V4L2_PIX_FMT_RGB555,
[VIDEO_PALETTE_RGB565] = V4L2_PIX_FMT_RGB565,
@@ -145,7 +145,7 @@
[VIDEO_PALETTE_YUV422P] = V4L2_PIX_FMT_YUV422P,
};
-static unsigned int
+static unsigned int __attribute_pure__
palette_to_pixelformat(unsigned int palette)
{
if (palette < ARRAY_SIZE(palette2pixelformat))
@@ -154,8 +154,8 @@
return 0;
}
-static unsigned int
-pixelformat_to_palette(int pixelformat)
+static unsigned int __attribute_const__
+pixelformat_to_palette(unsigned int pixelformat)
{
int palette = 0;
switch (pixelformat)
@@ -616,6 +616,8 @@
case VIDIOCSPICT: /* set tone controls & partial capture format */
{
struct video_picture *pict = arg;
+ int mem_err = 0, ovl_err = 0;
+
memset(&fbuf2, 0, sizeof(fbuf2));
set_v4l_control(inode, file,
@@ -628,33 +630,59 @@
V4L2_CID_SATURATION, pict->colour, drv);
set_v4l_control(inode, file,
V4L2_CID_WHITENESS, pict->whiteness, drv);
+ /*
+ * V4L1 uses this ioctl to set both memory capture and overlay
+ * pixel format, while V4L2 has two different ioctls for this.
+ * Some cards may not support one or the other, and may support
+ * different pixel formats for memory vs overlay.
+ */
fmt2 = kzalloc(sizeof(*fmt2),GFP_KERNEL);
fmt2->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
err = drv(inode, file, VIDIOC_G_FMT, fmt2);
- if (err < 0)
+ /* If VIDIOC_G_FMT failed, then the driver likely doesn't
+ support memory capture. Trying to set the memory capture
+ parameters would be pointless. */
+ if (err < 0) {
dprintk("VIDIOCSPICT / VIDIOC_G_FMT: %d\n",err);
- if (fmt2->fmt.pix.pixelformat !=
- palette_to_pixelformat(pict->palette)) {
+ mem_err = -1000; /* didn't even try */
+ } else if (fmt2->fmt.pix.pixelformat !=
+ palette_to_pixelformat(pict->palette)) {
fmt2->fmt.pix.pixelformat = palette_to_pixelformat(
pict->palette);
- err = drv(inode, file, VIDIOC_S_FMT, fmt2);
- if (err < 0)
- dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n",err);
+ mem_err = drv(inode, file, VIDIOC_S_FMT, fmt2);
+ if (mem_err < 0)
+ dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n",
+ mem_err);
}
err = drv(inode, file, VIDIOC_G_FBUF, &fbuf2);
- if (err < 0)
+ /* If VIDIOC_G_FBUF failed, then the driver likely doesn't
+ support overlay. Trying to set the overlay parameters
+ would be quite pointless. */
+ if (err < 0) {
dprintk("VIDIOCSPICT / VIDIOC_G_FBUF: %d\n",err);
- if (fbuf2.fmt.pixelformat !=
- palette_to_pixelformat(pict->palette)) {
+ ovl_err = -1000; /* didn't even try */
+ } else if (fbuf2.fmt.pixelformat !=
+ palette_to_pixelformat(pict->palette)) {
fbuf2.fmt.pixelformat = palette_to_pixelformat(
pict->palette);
- err = drv(inode, file, VIDIOC_S_FBUF, &fbuf2);
- if (err < 0)
- dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n",err);
- err = 0; /* likely fails for non-root */
+ ovl_err = drv(inode, file, VIDIOC_S_FBUF, &fbuf2);
+ if (ovl_err < 0)
+ dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n",
+ ovl_err);
}
+ if (ovl_err < 0 && mem_err < 0)
+ /* ioctl failed, couldn't set either parameter */
+ if (mem_err != -1000) {
+ err = mem_err;
+ } else if (ovl_err == -EPERM) {
+ err = 0;
+ } else {
+ err = ovl_err;
+ }
+ else
+ err = 0;
break;
}
case VIDIOCGTUNER: /* get tuner information */
diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c
index 459786f..a32dfbe 100644
--- a/drivers/media/video/video-buf.c
+++ b/drivers/media/video/video-buf.c
@@ -702,9 +702,7 @@
dprintk(1,"qbuf: memory type is wrong.\n");
goto done;
}
- if (buf->state == STATE_QUEUED ||
- buf->state == STATE_PREPARED ||
- buf->state == STATE_ACTIVE) {
+ if (buf->state != STATE_NEEDS_INIT && buf->state != STATE_IDLE) {
dprintk(1,"qbuf: buffer is already queued or active.\n");
goto done;
}
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index 5263b50..b876aca6 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -433,13 +433,43 @@
int ret = -EINVAL;
if ( (vfd->debug & V4L2_DEBUG_IOCTL) &&
- !(vfd->debug | V4L2_DEBUG_IOCTL_ARG)) {
+ !(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
v4l_print_ioctl(vfd->name, cmd);
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+ /***********************************************************
+ Handles calls to the obsoleted V4L1 API
+ Due to the nature of VIDIOCGMBUF, each driver that supports
+ V4L1 should implement its own handler for this ioctl.
+ ***********************************************************/
+
+ /* --- streaming capture ------------------------------------- */
+ if (cmd == VIDIOCGMBUF) {
+ struct video_mbuf *p=arg;
+
+ memset(p,0,sizeof(p));
+
+ if (!vfd->vidiocgmbuf)
+ return ret;
+ ret=vfd->vidiocgmbuf(file, fh, p);
+ if (!ret)
+ dbgarg (cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
+ p->size, p->frames,
+ (unsigned long)p->offsets);
+ return ret;
+ }
+
+ /********************************************************
+ All other V4L1 calls are handled by v4l1_compat module.
+ Those calls will be translated into V4L2 calls, and
+ __video_do_ioctl will be called again, with one or more
+ V4L2 ioctls.
+ ********************************************************/
if (_IOC_TYPE(cmd)=='v')
return v4l_compat_translate_ioctl(inode,file,cmd,arg,
__video_do_ioctl);
+#endif
switch(cmd) {
/* --- capabilities ------------------------------------------ */
@@ -791,24 +821,6 @@
ret=vfd->vidioc_overlay(file, fh, *i);
break;
}
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
- /* --- streaming capture ------------------------------------- */
- case VIDIOCGMBUF:
- {
- struct video_mbuf *p=arg;
-
- memset(p,0,sizeof(p));
-
- if (!vfd->vidiocgmbuf)
- break;
- ret=vfd->vidiocgmbuf(file, fh, p);
- if (!ret)
- dbgarg (cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
- p->size, p->frames,
- (unsigned long)p->offsets);
- break;
- }
-#endif
case VIDIOC_G_FBUF:
{
struct v4l2_framebuffer *p=arg;
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index a859a69..47cd93f 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
config USB_ZC0301
tristate "USB ZC0301[P] Image Processor and Control Chip support"
- depends on USB && VIDEO_V4L1
+ depends on VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on the ZC0301 or
ZC0301P Image Processors and Control Chips.
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index 71037f9..c88cc75 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -1,5 +1,6 @@
menu "Fusion MPT device support"
+ depends on PCI
config FUSION
bool
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index 6443392..f4ac21e 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -1,5 +1,6 @@
menu "I2O device support"
+ depends on PCI
config I2O
tristate "I2O support"
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ab6e985..a20a51e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -3,6 +3,7 @@
#
menu "Multifunction device drivers"
+ depends on HAS_IOMEM
config MFD_SM501
tristate "Support for Silicon Motion SM501"
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 877e790..2f2fbff 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -130,7 +130,7 @@
Read <file:Documentation/sony-laptop.txt> for more information.
-config SONY_LAPTOP_OLD
+config SONYPI_COMPAT
bool "Sonypi compatibility"
depends on SONY_LAPTOP
---help---
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 65c32a9..4f9060a 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -30,7 +30,7 @@
* Eric Burghard - LED display support for W1N
* Josh Green - Light Sens support
* Thomas Tuttle - His first patch for led support was very helpfull
- *
+ * Sam Lin - GPS support
*/
#include <linux/autoconf.h>
@@ -48,7 +48,7 @@
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
-#define ASUS_LAPTOP_VERSION "0.41"
+#define ASUS_LAPTOP_VERSION "0.42"
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
@@ -83,6 +83,7 @@
#define PLED_ON 0x20 //Phone LED
#define GLED_ON 0x40 //Gaming LED
#define LCD_ON 0x80 //LCD backlight
+#define GPS_ON 0x100 //GPS
#define ASUS_LOG ASUS_HOTK_FILE ": "
#define ASUS_ERR KERN_ERR ASUS_LOG
@@ -148,7 +149,7 @@
ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G
M6A M6V VX-1 V6J V6V W3Z */
"\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
- S5A M5A z33A W1Jc W2V */
+ S5A M5A z33A W1Jc W2V G1 */
"\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
"\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
"\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */
@@ -162,6 +163,12 @@
ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
+/* GPS */
+/* R2H use different handle for GPS on/off */
+ASUS_HANDLE(gps_on, ASUS_HOTK_PREFIX "SDON"); /* R2H */
+ASUS_HANDLE(gps_off, ASUS_HOTK_PREFIX "SDOF"); /* R2H */
+ASUS_HANDLE(gps_status, ASUS_HOTK_PREFIX "GPST");
+
/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
@@ -278,12 +285,28 @@
return (hotk->status & mask) ? 1 : 0;
}
+static int read_gps_status(void)
+{
+ ulong status;
+ acpi_status rv = AE_OK;
+
+ rv = acpi_evaluate_integer(gps_status_handle, NULL, NULL, &status);
+ if (ACPI_FAILURE(rv))
+ printk(ASUS_WARNING "Error reading GPS status\n");
+ else
+ return status ? 1 : 0;
+
+ return (hotk->status & GPS_ON) ? 1 : 0;
+}
+
/* Generic LED functions */
static int read_status(int mask)
{
/* There is a special method for both wireless devices */
if (mask == BT_ON || mask == WL_ON)
return read_wireless_status(mask);
+ else if (mask == GPS_ON)
+ return read_gps_status();
return (hotk->status & mask) ? 1 : 0;
}
@@ -299,6 +322,10 @@
case GLED_ON:
out = (out & 0x1) + 1;
break;
+ case GPS_ON:
+ handle = (out) ? gps_on_handle : gps_off_handle;
+ out = 0x02;
+ break;
default:
out &= 0x1;
break;
@@ -667,6 +694,21 @@
return rv;
}
+/*
+ * GPS
+ */
+static ssize_t show_gps(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_status(GPS_ON));
+}
+
+static ssize_t store_gps(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_status(buf, count, NULL, GPS_ON);
+}
+
static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
{
/* TODO Find a better way to handle events count. */
@@ -715,6 +757,7 @@
static ASUS_CREATE_DEVICE_ATTR(ledd);
static ASUS_CREATE_DEVICE_ATTR(ls_switch);
static ASUS_CREATE_DEVICE_ATTR(ls_level);
+static ASUS_CREATE_DEVICE_ATTR(gps);
static struct attribute *asuspf_attributes[] = {
&dev_attr_infos.attr,
@@ -724,6 +767,7 @@
&dev_attr_ledd.attr,
&dev_attr_ls_switch.attr,
&dev_attr_ls_level.attr,
+ &dev_attr_gps.attr,
NULL
};
@@ -763,6 +807,9 @@
ASUS_SET_DEVICE_ATTR(ls_level, 0644, show_lslvl, store_lslvl);
ASUS_SET_DEVICE_ATTR(ls_switch, 0644, show_lssw, store_lssw);
}
+
+ if (gps_status_handle && gps_on_handle && gps_off_handle)
+ ASUS_SET_DEVICE_ATTR(gps, 0644, show_gps, store_gps);
}
static int asus_handle_init(char *name, acpi_handle * handle,
@@ -890,9 +937,13 @@
/* There is a lot of models with "ALSL", but a few get
a real light sens, so we need to check it. */
- if (ASUS_HANDLE_INIT(ls_switch))
+ if (!ASUS_HANDLE_INIT(ls_switch))
ASUS_HANDLE_INIT(ls_level);
+ ASUS_HANDLE_INIT(gps_on);
+ ASUS_HANDLE_INIT(gps_off);
+ ASUS_HANDLE_INIT(gps_status);
+
kfree(model);
return AE_OK;
@@ -950,7 +1001,7 @@
* We install the handler, it will receive the hotk in parameter, so, we
* could add other data to the hotk struct
*/
- status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
+ status = acpi_install_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
asus_hotk_notify, hotk);
if (ACPI_FAILURE(status))
printk(ASUS_ERR "Error installing notify handler\n");
@@ -981,6 +1032,9 @@
if (ls_level_handle)
set_light_sens_level(hotk->light_level);
+ /* GPS is on by default */
+ write_status(NULL, 1, GPS_ON);
+
end:
if (result) {
kfree(hotk->name);
@@ -997,7 +1051,7 @@
if (!device || !acpi_driver_data(device))
return -EINVAL;
- status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
+ status = acpi_remove_notify_handler(hotk->handle, ACPI_ALL_NOTIFY,
asus_hotk_notify);
if (ACPI_FAILURE(status))
printk(ASUS_ERR "Error removing notify handler\n");
diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c
index 68c4b58..41e901f 100644
--- a/drivers/misc/msi-laptop.c
+++ b/drivers/misc/msi-laptop.c
@@ -85,7 +85,7 @@
buf[0] = 0x80;
buf[1] = (u8) (level*31);
- return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, buf, sizeof(buf), NULL, 0);
+ return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, buf, sizeof(buf), NULL, 0, 1);
}
static int get_lcd_level(void)
@@ -93,7 +93,7 @@
u8 wdata = 0, rdata;
int result;
- result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, &rdata, 1);
+ result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, &rdata, 1, 1);
if (result < 0)
return result;
@@ -105,7 +105,7 @@
u8 wdata = 4, rdata;
int result;
- result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, &rdata, 1);
+ result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, &rdata, 1, 1);
if (result < 0)
return result;
@@ -119,14 +119,14 @@
wdata[0] = 4;
- result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 1, &rdata, 1);
+ result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 1, &rdata, 1, 1);
if (result < 0)
return result;
wdata[0] = 0x84;
wdata[1] = (rdata & 0xF7) | (enable ? 8 : 0);
- return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 2, NULL, 0);
+ return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 2, NULL, 0, 1);
}
static int get_wireless_state(int *wlan, int *bluetooth)
@@ -134,7 +134,7 @@
u8 wdata = 0, rdata;
int result;
- result = ec_transaction(MSI_EC_COMMAND_WIRELESS, &wdata, 1, &rdata, 1);
+ result = ec_transaction(MSI_EC_COMMAND_WIRELESS, &wdata, 1, &rdata, 1, 1);
if (result < 0)
return -1;
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index c15c1f6..8ee0321 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -63,7 +63,7 @@
#include <asm/uaccess.h>
#include <linux/sonypi.h>
#include <linux/sony-laptop.h>
-#ifdef CONFIG_SONY_LAPTOP_OLD
+#ifdef CONFIG_SONYPI_COMPAT
#include <linux/poll.h>
#include <linux/miscdevice.h>
#endif
@@ -114,7 +114,7 @@
"set this to 1 to enable Motion Eye camera controls "
"(only use it if you have a C1VE or C1VN model)");
-#ifdef CONFIG_SONY_LAPTOP_OLD
+#ifdef CONFIG_SONYPI_COMPAT
static int minor = -1;
module_param(minor, int, 0);
MODULE_PARM_DESC(minor,
@@ -1504,7 +1504,7 @@
};
/******** SONYPI compatibility **********/
-#ifdef CONFIG_SONY_LAPTOP_OLD
+#ifdef CONFIG_SONYPI_COMPAT
/* battery / brightness / temperature addresses */
#define SONYPI_BAT_FLAGS 0x81
@@ -1798,7 +1798,7 @@
static int sonypi_compat_init(void) { return 0; }
static void sonypi_compat_exit(void) { }
static void sonypi_compat_report_event(u8 event) { }
-#endif /* CONFIG_SONY_LAPTOP_OLD */
+#endif /* CONFIG_SONYPI_COMPAT */
/*
* ACPI callbacks
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 45b7d53..c0b41e8 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -4,6 +4,7 @@
menuconfig MMC
tristate "MMC/SD card support"
+ depends on HAS_IOMEM
help
MMC is the "multi-media card" bus protocol.
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index d24ab23..a7562f7 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -45,8 +45,6 @@
*/
#define MMC_SHIFT 3
-static int major;
-
/*
* There is one mmc_blk_data per slot.
*/
@@ -466,7 +464,7 @@
md->queue.issue_fn = mmc_blk_issue_rq;
md->queue.data = md;
- md->disk->major = major;
+ md->disk->major = MMC_BLOCK_MAJOR;
md->disk->first_minor = devidx << MMC_SHIFT;
md->disk->fops = &mmc_bdops;
md->disk->private_data = md;
@@ -634,14 +632,9 @@
{
int res = -ENOMEM;
- res = register_blkdev(major, "mmc");
- if (res < 0) {
- printk(KERN_WARNING "Unable to get major %d for MMC media: %d\n",
- major, res);
+ res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
+ if (res)
goto out;
- }
- if (major == 0)
- major = res;
return mmc_register_driver(&mmc_driver);
@@ -652,7 +645,7 @@
static void __exit mmc_blk_exit(void)
{
mmc_unregister_driver(&mmc_driver);
- unregister_blkdev(major, "mmc");
+ unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
}
module_init(mmc_blk_init);
@@ -661,5 +654,3 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
-module_param(major, int, 0444);
-MODULE_PARM_DESC(major, "specify the major device number for MMC block driver");
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index b7156a4..f967226 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -187,9 +187,8 @@
}
static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
- struct mmc_command *cmd)
+ struct mmc_command *cmd, unsigned int flags)
{
-
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
switch (mmc_resp_type(cmd)) {
@@ -213,24 +212,16 @@
return MMC_ERR_INVALID;
}
- switch(cmd->opcode) {
- case MMC_READ_SINGLE_BLOCK:
- case SD_APP_SEND_SCR:
- mmccmd |= SD_CMD_CT_2;
- break;
- case MMC_READ_MULTIPLE_BLOCK:
- mmccmd |= SD_CMD_CT_4;
- break;
- case MMC_WRITE_BLOCK:
- mmccmd |= SD_CMD_CT_1;
- break;
-
- case MMC_WRITE_MULTIPLE_BLOCK:
- mmccmd |= SD_CMD_CT_3;
- break;
- case MMC_STOP_TRANSMISSION:
- mmccmd |= SD_CMD_CT_7;
- break;
+ if (flags & MMC_DATA_READ) {
+ if (flags & MMC_DATA_MULTI)
+ mmccmd |= SD_CMD_CT_4;
+ else
+ mmccmd |= SD_CMD_CT_2;
+ } else if (flags & MMC_DATA_WRITE) {
+ if (flags & MMC_DATA_MULTI)
+ mmccmd |= SD_CMD_CT_3;
+ else
+ mmccmd |= SD_CMD_CT_1;
}
au_writel(cmd->arg, HOST_CMDARG(host));
@@ -665,6 +656,7 @@
{
struct au1xmmc_host *host = mmc_priv(mmc);
+ unsigned int flags = 0;
int ret = MMC_ERR_NONE;
WARN_ON(irqs_disabled());
@@ -677,11 +669,12 @@
if (mrq->data) {
FLUSH_FIFO(host);
+ flags = mrq->data->flags;
ret = au1xmmc_prepare_data(host, mrq->data);
}
if (ret == MMC_ERR_NONE)
- ret = au1xmmc_send_command(host, 0, mrq->cmd);
+ ret = au1xmmc_send_command(host, 0, mrq->cmd, flags);
if (ret != MMC_ERR_NONE) {
mrq->cmd->error = ret;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d97d386..f8985c5 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -232,20 +232,14 @@
/*
* workaround for erratum #42:
* Intel PXA27x Family Processor Specification Update Rev 001
+ * A bogus CRC error can appear if the msb of a 136 bit
+ * response is a one.
*/
- if (cmd->opcode == MMC_ALL_SEND_CID ||
- cmd->opcode == MMC_SEND_CSD ||
- cmd->opcode == MMC_SEND_CID) {
- /* a bogus CRC error can appear if the msb of
- the 15 byte response is a one */
- if ((cmd->resp[0] & 0x80000000) == 0)
- cmd->error = MMC_ERR_BADCRC;
- } else {
- pr_debug("ignoring CRC from command %d - *risky*\n",cmd->opcode);
- }
-#else
- cmd->error = MMC_ERR_BADCRC;
+ if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
+ pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
+ } else
#endif
+ cmd->error = MMC_ERR_BADCRC;
}
pxamci_disable_irq(host, END_CMD_RES);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ff5bf73..a359efd 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -963,6 +963,15 @@
if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
sdhci_transfer_pio(host);
+ /*
+ * We currently don't do anything fancy with DMA
+ * boundaries, but as we can't disable the feature
+ * we need to at least restart the transfer.
+ */
+ if (intmask & SDHCI_INT_DMA_END)
+ writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS),
+ host->ioaddr + SDHCI_DMA_ADDRESS);
+
if (intmask & SDHCI_INT_DATA_END)
sdhci_finish_data(host);
}
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index c1b47db..fbec8cd 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -2,6 +2,7 @@
menuconfig MTD
tristate "Memory Technology Device (MTD) support"
+ depends on HAS_IOMEM
help
Memory Technology Devices are flash, RAM and similar chips, often
used for solid state file systems on embedded devices. This option
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b3f4ffa..c5baa19 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1898,8 +1898,12 @@
# Gigabit Ethernet
#
-menu "Ethernet (1000 Mbit)"
+menuconfig NETDEV_1000
+ bool "Ethernet (1000 Mbit)"
depends on !UML
+ default y
+
+if NETDEV_1000
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2299,7 +2303,7 @@
config MV643XX_ETH
tristate "MV-643XX Ethernet support"
- depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
+ depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
select MII
help
This driver supports the gigabit Ethernet on the Marvell MV643XX
@@ -2326,14 +2330,18 @@
To compile this driver as a module, choose M here. The module
will be called atl1.
-endmenu
+endif # NETDEV_1000
#
# 10 Gigabit Ethernet
#
-menu "Ethernet (10000 Mbit)"
+menuconfig NETDEV_10000
+ bool "Ethernet (10000 Mbit)"
depends on !UML
+ default y
+
+if NETDEV_10000
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
@@ -2508,7 +2516,7 @@
debug_level module parameter (which can also be set after
the driver is loaded through sysfs).
-endmenu
+endif # NETDEV_10000
source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
index f075ceb..f21148e 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/arm/ether1.c
@@ -1014,8 +1014,7 @@
SET_NETDEV_DEV(dev, &ec->dev);
dev->irq = ec->irq;
- priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
- ecard_resource_len(ec, ECARD_RES_IOCFAST));
+ priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!priv(dev)->base) {
ret = -ENOMEM;
goto free;
@@ -1056,8 +1055,6 @@
return 0;
free:
- if (priv(dev)->base)
- iounmap(priv(dev)->base);
free_netdev(dev);
release:
ecard_release_resources(ec);
@@ -1072,7 +1069,6 @@
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
- iounmap(priv(dev)->base);
free_netdev(dev);
ecard_release_resources(ec);
}
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 32da2eb..da71350 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -793,8 +793,7 @@
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &ec->dev);
- priv(dev)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
- ecard_resource_len(ec, ECARD_RES_MEMC));
+ priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!priv(dev)->base) {
ret = -ENOMEM;
goto free;
@@ -869,8 +868,6 @@
return 0;
free:
- if (priv(dev)->base)
- iounmap(priv(dev)->base);
free_netdev(dev);
release:
ecard_release_resources(ec);
@@ -885,7 +882,6 @@
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
- iounmap(priv(dev)->base);
free_netdev(dev);
ecard_release_resources(ec);
}
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 61f574a..769ba69 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -686,7 +686,7 @@
eh->supported = data->supported;
eh->ctrl = 0;
eh->id = ec->cid.product;
- eh->memc = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC), PAGE_SIZE);
+ eh->memc = ecardm_iomap(ec, ECARD_RES_MEMC, 0, PAGE_SIZE);
if (!eh->memc) {
ret = -ENOMEM;
goto free;
@@ -694,7 +694,7 @@
eh->ctrl_port = eh->memc;
if (data->ctrl_ioc) {
- eh->ioc_fast = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST), PAGE_SIZE);
+ eh->ioc_fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, PAGE_SIZE);
if (!eh->ioc_fast) {
ret = -ENOMEM;
goto free;
@@ -710,8 +710,7 @@
* IRQ and control port handling - only for non-NIC slot cards.
*/
if (ec->slot_no != 8) {
- ec->ops = ðerh_ops;
- ec->irq_data = eh;
+ ecard_setirq(ec, ðerh_ops, eh);
} else {
/*
* If we're in the NIC slot, make sure the IRQ is enabled
@@ -759,10 +758,6 @@
return 0;
free:
- if (eh->ioc_fast)
- iounmap(eh->ioc_fast);
- if (eh->memc)
- iounmap(eh->memc);
free_netdev(dev);
release:
ecard_release_resources(ec);
@@ -773,16 +768,10 @@
static void __devexit etherh_remove(struct expansion_card *ec)
{
struct net_device *dev = ecard_get_drvdata(ec);
- struct etherh_priv *eh = etherh_priv(dev);
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
- ec->ops = NULL;
-
- if (eh->ioc_fast)
- iounmap(eh->ioc_fast);
- iounmap(eh->memc);
free_netdev(dev);
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index d0f2898..7540966 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -167,7 +167,7 @@
fep->ring_mem_addr = cpm_dpalloc((fpi->tx_ring + fpi->rx_ring) *
sizeof(cbd_t), 8);
- if (IS_DPERR(fep->ring_mem_addr))
+ if (IS_ERR_VALUE(fep->ring_mem_addr))
return -ENOMEM;
fep->ring_base = cpm_dpram_addr(fep->ring_mem_addr);
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 7c8ccc0..829da9a 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -141,6 +141,20 @@
To activate support for ACTiSYS IR-200L dongle you will have to
start irattach like this: "irattach -d act200l".
+config KINGSUN_DONGLE
+ tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
+ depends on IRDA && USB && EXPERIMENTAL
+ help
+ Say Y or M here if you want to build support for the KingSun/DonShine
+ DS-620 IrDA-USB bridge device driver.
+
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speed only (9600 bps).
+
+ To compile it as a module, choose M here: the module will be called
+ kingsun-sir.
+
comment "Old SIR device drivers"
config IRPORT_SIR
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 5be09f1..233a2f9 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o
+obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o
# The SIR helper module
sir-dev-objs := sir_dev.o sir_dongle.o
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
new file mode 100644
index 0000000..2174291
--- /dev/null
+++ b/drivers/net/irda/kingsun-sir.c
@@ -0,0 +1,657 @@
+/*****************************************************************************
+*
+* Filename: kingsun-sir.c
+* Version: 0.1.1
+* Description: Irda KingSun/DonShine USB Dongle
+* Status: Experimental
+* Author: Alex Villac�s Lasso <a_villacis@palosanto.com>
+*
+* Based on stir4200 and mcs7780 drivers, with (strange?) differences
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+/*
+ * This is my current (2007-04-25) understanding of how this dongle is supposed
+ * to work. This is based on reverse-engineering and examination of the packet
+ * data sent and received by the WinXP driver using USBSnoopy. Feel free to
+ * update here as more of this dongle is known:
+ *
+ * General: Unlike the other USB IrDA dongles, this particular dongle exposes,
+ * not two bulk (in and out) endpoints, but two *interrupt* ones. This dongle,
+ * like the bulk based ones (stir4200.c and mcs7780.c), requires polling in
+ * order to receive data.
+ * Transmission: Just like stir4200, this dongle uses a raw stream of data,
+ * which needs to be wrapped and escaped in a similar way as in stir4200.c.
+ * Reception: Poll-based, as in stir4200. Each read returns the contents of a
+ * 8-byte buffer, of which the first byte (LSB) indicates the number of bytes
+ * (1-7) of valid data contained within the remaining 7 bytes. For example, if
+ * the buffer had the following contents:
+ * 06 ff ff ff c0 01 04 aa
+ * This means that (06) there are 6 bytes of valid data. The byte 0xaa at the
+ * end is garbage (left over from a previous reception) and is discarded.
+ * If a read returns an "impossible" value as the length of valid data (such as
+ * 0x36) in the first byte, then the buffer is uninitialized (as is the case of
+ * first plug-in) and its contents should be discarded. There is currently no
+ * evidence that the top 5 bits of the 1st byte of the buffer can have values
+ * other than 0 once reception begins.
+ * Once valid bytes are collected, the assembled stream is a sequence of
+ * wrapped IrDA frames that is unwrapped and unescaped as in stir4200.c.
+ * BIG FAT WARNING: the dongle does *not* reset the RX buffer in any way after
+ * a successful read from the host, which means that in absence of further
+ * reception, repeated reads from the dongle will return the exact same
+ * contents repeatedly. Attempts to be smart and cache a previous read seem
+ * to result in corrupted packets, so this driver depends on the unwrap logic
+ * to sort out any repeated reads.
+ * Speed change: no commands observed so far to change speed, assumed fixed
+ * 9600bps (SIR).
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/crc32.h>
+
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+
+/*
+ * According to lsusb, 0x07c0 is assigned to
+ * "Code Mercenaries Hard- und Software GmbH"
+ */
+#define KING_VENDOR_ID 0x07c0
+#define KING_PRODUCT_ID 0x4200
+
+/* These are the currently known USB ids */
+static struct usb_device_id dongles[] = {
+ /* KingSun Co,Ltd IrDA/USB Bridge */
+ { USB_DEVICE(KING_VENDOR_ID, KING_PRODUCT_ID) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+#define KINGSUN_MTT 0x07
+
+#define KINGSUN_FIFO_SIZE 4096
+#define KINGSUN_EP_IN 0
+#define KINGSUN_EP_OUT 1
+
+struct kingsun_cb {
+ struct usb_device *usbdev; /* init: probe_irda */
+ struct net_device *netdev; /* network layer */
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct net_device_stats stats; /* network statistics */
+ struct qos_info qos;
+
+ __u8 *in_buf; /* receive buffer */
+ __u8 *out_buf; /* transmit buffer */
+ __u8 max_rx; /* max. atomic read from dongle
+ (usually 8), also size of in_buf */
+ __u8 max_tx; /* max. atomic write to dongle
+ (usually 8) */
+
+ iobuff_t rx_buff; /* receive unwrap state machine */
+ struct timeval rx_time;
+ spinlock_t lock;
+ int receiving;
+
+ __u8 ep_in;
+ __u8 ep_out;
+
+ struct urb *tx_urb;
+ struct urb *rx_urb;
+};
+
+/* Callback transmission routine */
+static void kingsun_send_irq(struct urb *urb)
+{
+ struct kingsun_cb *kingsun = urb->context;
+ struct net_device *netdev = kingsun->netdev;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(kingsun->netdev)) {
+ err("kingsun_send_irq: Network not running!");
+ return;
+ }
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("kingsun_send_irq: urb asynchronously failed - %d",
+ urb->status);
+ }
+ netif_wake_queue(netdev);
+}
+
+/*
+ * Called from net/core when new frame is available.
+ */
+static int kingsun_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct kingsun_cb *kingsun;
+ int wraplen;
+ int ret = 0;
+
+ if (skb == NULL || netdev == NULL)
+ return -EINVAL;
+
+ netif_stop_queue(netdev);
+
+ /* the IRDA wrapping routines don't deal with non linear skb */
+ SKB_LINEAR_ASSERT(skb);
+
+ kingsun = netdev_priv(netdev);
+
+ spin_lock(&kingsun->lock);
+
+ /* Append data to the end of whatever data remains to be transmitted */
+ wraplen = async_wrap_skb(skb,
+ kingsun->out_buf,
+ KINGSUN_FIFO_SIZE);
+
+ /* Calculate how much data can be transmitted in this urb */
+ usb_fill_int_urb(kingsun->tx_urb, kingsun->usbdev,
+ usb_sndintpipe(kingsun->usbdev, kingsun->ep_out),
+ kingsun->out_buf, wraplen, kingsun_send_irq,
+ kingsun, 1);
+
+ if ((ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC))) {
+ err("kingsun_hard_xmit: failed tx_urb submit: %d", ret);
+ switch (ret) {
+ case -ENODEV:
+ case -EPIPE:
+ break;
+ default:
+ kingsun->stats.tx_errors++;
+ netif_start_queue(netdev);
+ }
+ } else {
+ kingsun->stats.tx_packets++;
+ kingsun->stats.tx_bytes += skb->len;
+ }
+
+ dev_kfree_skb(skb);
+ spin_unlock(&kingsun->lock);
+
+ return ret;
+}
+
+/* Receive callback function */
+static void kingsun_rcv_irq(struct urb *urb)
+{
+ struct kingsun_cb *kingsun = urb->context;
+ int ret;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(kingsun->netdev)) {
+ kingsun->receiving = 0;
+ return;
+ }
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0) {
+ err("kingsun_rcv_irq: urb asynchronously failed - %d",
+ urb->status);
+ kingsun->receiving = 0;
+ return;
+ }
+
+ if (urb->actual_length == kingsun->max_rx) {
+ __u8 *bytes = urb->transfer_buffer;
+ int i;
+
+ /* The very first byte in the buffer indicates the length of
+ valid data in the read. This byte must be in the range
+ 1..kingsun->max_rx -1 . Values outside this range indicate
+ an uninitialized Rx buffer when the dongle has just been
+ plugged in. */
+ if (bytes[0] >= 1 && bytes[0] < kingsun->max_rx) {
+ for (i = 1; i <= bytes[0]; i++) {
+ async_unwrap_char(kingsun->netdev,
+ &kingsun->stats,
+ &kingsun->rx_buff, bytes[i]);
+ }
+ kingsun->netdev->last_rx = jiffies;
+ do_gettimeofday(&kingsun->rx_time);
+ kingsun->receiving =
+ (kingsun->rx_buff.state != OUTSIDE_FRAME)
+ ? 1 : 0;
+ }
+ } else if (urb->actual_length > 0) {
+ err("%s(): Unexpected response length, expected %d got %d",
+ __FUNCTION__, kingsun->max_rx, urb->actual_length);
+ }
+ /* This urb has already been filled in kingsun_net_open */
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+/*
+ * Function kingsun_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ */
+static int kingsun_net_open(struct net_device *netdev)
+{
+ struct kingsun_cb *kingsun = netdev_priv(netdev);
+ int err = -ENOMEM;
+ char hwname[16];
+
+ /* At this point, urbs are NULL, and skb is NULL (see kingsun_probe) */
+ kingsun->receiving = 0;
+
+ /* Initialize for SIR to copy data directly into skb. */
+ kingsun->rx_buff.in_frame = FALSE;
+ kingsun->rx_buff.state = OUTSIDE_FRAME;
+ kingsun->rx_buff.truesize = IRDA_SKB_MAX_MTU;
+ kingsun->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!kingsun->rx_buff.skb)
+ goto free_mem;
+
+ skb_reserve(kingsun->rx_buff.skb, 1);
+ kingsun->rx_buff.head = kingsun->rx_buff.skb->data;
+ do_gettimeofday(&kingsun->rx_time);
+
+ kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->rx_urb)
+ goto free_mem;
+
+ kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kingsun->tx_urb)
+ goto free_mem;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ */
+ sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
+ kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
+ if (!kingsun->irlap) {
+ err("kingsun-sir: irlap_open failed");
+ goto free_mem;
+ }
+
+ /* Start first reception */
+ usb_fill_int_urb(kingsun->rx_urb, kingsun->usbdev,
+ usb_rcvintpipe(kingsun->usbdev, kingsun->ep_in),
+ kingsun->in_buf, kingsun->max_rx,
+ kingsun_rcv_irq, kingsun, 1);
+ kingsun->rx_urb->status = 0;
+ err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+ if (err) {
+ err("kingsun-sir: first urb-submit failed: %d", err);
+ goto close_irlap;
+ }
+
+ netif_start_queue(netdev);
+
+ /* Situation at this point:
+ - all work buffers allocated
+ - urbs allocated and ready to fill
+ - max rx packet known (in max_rx)
+ - unwrap state machine initialized, in state outside of any frame
+ - receive request in progress
+ - IrLAP layer started, about to hand over packets to send
+ */
+
+ return 0;
+
+ close_irlap:
+ irlap_close(kingsun->irlap);
+ free_mem:
+ if (kingsun->tx_urb) {
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+ }
+ if (kingsun->rx_urb) {
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+ }
+ if (kingsun->rx_buff.skb) {
+ kfree_skb(kingsun->rx_buff.skb);
+ kingsun->rx_buff.skb = NULL;
+ kingsun->rx_buff.head = NULL;
+ }
+ return err;
+}
+
+/*
+ * Function kingsun_net_close (kingsun)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int kingsun_net_close(struct net_device *netdev)
+{
+ struct kingsun_cb *kingsun = netdev_priv(netdev);
+
+ /* Stop transmit processing */
+ netif_stop_queue(netdev);
+
+ /* Mop up receive && transmit urb's */
+ usb_kill_urb(kingsun->tx_urb);
+ usb_kill_urb(kingsun->rx_urb);
+
+ usb_free_urb(kingsun->tx_urb);
+ usb_free_urb(kingsun->rx_urb);
+
+ kingsun->tx_urb = NULL;
+ kingsun->rx_urb = NULL;
+
+ kfree_skb(kingsun->rx_buff.skb);
+ kingsun->rx_buff.skb = NULL;
+ kingsun->rx_buff.head = NULL;
+ kingsun->rx_buff.in_frame = FALSE;
+ kingsun->rx_buff.state = OUTSIDE_FRAME;
+ kingsun->receiving = 0;
+
+ /* Stop and remove instance of IrLAP */
+ if (kingsun->irlap)
+ irlap_close(kingsun->irlap);
+
+ kingsun->irlap = NULL;
+
+ return 0;
+}
+
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int kingsun_net_ioctl(struct net_device *netdev, struct ifreq *rq,
+ int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct kingsun_cb *kingsun = netdev_priv(netdev);
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the device is still there */
+ if (netif_device_present(kingsun->netdev))
+ /* No observed commands for speed change */
+ ret = -EOPNOTSUPP;
+ break;
+
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the IrDA stack is still there */
+ if (netif_running(kingsun->netdev))
+ irda_device_set_media_busy(kingsun->netdev, TRUE);
+ break;
+
+ case SIOCGRECEIVING:
+ /* Only approximately true */
+ irq->ifr_receiving = kingsun->receiving;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *
+kingsun_net_get_stats(struct net_device *netdev)
+{
+ struct kingsun_cb *kingsun = netdev_priv(netdev);
+ return &kingsun->stats;
+}
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ */
+static int kingsun_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct kingsun_cb *kingsun = NULL;
+ struct net_device *net = NULL;
+ int ret = -ENOMEM;
+ int pipe, maxp_in, maxp_out;
+ __u8 ep_in;
+ __u8 ep_out;
+
+ /* Check that there really are two interrupt endpoints.
+ Check based on the one in drivers/usb/input/usbmouse.c
+ */
+ interface = intf->cur_altsetting;
+ if (interface->desc.bNumEndpoints != 2) {
+ err("kingsun-sir: expected 2 endpoints, found %d",
+ interface->desc.bNumEndpoints);
+ return -ENODEV;
+ }
+ endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
+ if (!usb_endpoint_is_int_in(endpoint)) {
+ err("kingsun-sir: endpoint 0 is not interrupt IN");
+ return -ENODEV;
+ }
+
+ ep_in = endpoint->bEndpointAddress;
+ pipe = usb_rcvintpipe(dev, ep_in);
+ maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+ if (maxp_in > 255 || maxp_in <= 1) {
+ err("%s: endpoint 0 has max packet size %d not in range",
+ __FILE__, maxp_in);
+ return -ENODEV;
+ }
+
+ endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
+ if (!usb_endpoint_is_int_out(endpoint)) {
+ err("kingsun-sir: endpoint 1 is not interrupt OUT");
+ return -ENODEV;
+ }
+
+ ep_out = endpoint->bEndpointAddress;
+ pipe = usb_sndintpipe(dev, ep_out);
+ maxp_out = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ /* Allocate network device container. */
+ net = alloc_irdadev(sizeof(*kingsun));
+ if(!net)
+ goto err_out1;
+
+ SET_MODULE_OWNER(net);
+ SET_NETDEV_DEV(net, &intf->dev);
+ kingsun = netdev_priv(net);
+ kingsun->irlap = NULL;
+ kingsun->tx_urb = NULL;
+ kingsun->rx_urb = NULL;
+ kingsun->ep_in = ep_in;
+ kingsun->ep_out = ep_out;
+ kingsun->in_buf = NULL;
+ kingsun->out_buf = NULL;
+ kingsun->max_rx = (__u8)maxp_in;
+ kingsun->max_tx = (__u8)maxp_out;
+ kingsun->netdev = net;
+ kingsun->usbdev = dev;
+ kingsun->rx_buff.in_frame = FALSE;
+ kingsun->rx_buff.state = OUTSIDE_FRAME;
+ kingsun->rx_buff.skb = NULL;
+ kingsun->receiving = 0;
+ spin_lock_init(&kingsun->lock);
+
+ /* Allocate input buffer */
+ kingsun->in_buf = (__u8 *)kmalloc(kingsun->max_rx, GFP_KERNEL);
+ if (!kingsun->in_buf)
+ goto free_mem;
+
+ /* Allocate output buffer */
+ kingsun->out_buf = (__u8 *)kmalloc(KINGSUN_FIFO_SIZE, GFP_KERNEL);
+ if (!kingsun->out_buf)
+ goto free_mem;
+
+ printk(KERN_INFO "KingSun/DonShine IRDA/USB found at address %d, "
+ "Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&kingsun->qos);
+
+ /* That's the Rx capability. */
+ kingsun->qos.baud_rate.bits &= IR_9600;
+ kingsun->qos.min_turn_time.bits &= KINGSUN_MTT;
+ irda_qos_bits_to_value(&kingsun->qos);
+
+ /* Override the network functions we need to use */
+ net->hard_start_xmit = kingsun_hard_xmit;
+ net->open = kingsun_net_open;
+ net->stop = kingsun_net_close;
+ net->get_stats = kingsun_net_get_stats;
+ net->do_ioctl = kingsun_net_ioctl;
+
+ ret = register_netdev(net);
+ if (ret != 0)
+ goto free_mem;
+
+ info("IrDA: Registered KingSun/DonShine device %s", net->name);
+
+ usb_set_intfdata(intf, kingsun);
+
+ /* Situation at this point:
+ - all work buffers allocated
+ - urbs not allocated, set to NULL
+ - max rx packet known (in max_rx)
+ - unwrap state machine (partially) initialized, but skb == NULL
+ */
+
+ return 0;
+
+free_mem:
+ if (kingsun->out_buf) kfree(kingsun->out_buf);
+ if (kingsun->in_buf) kfree(kingsun->in_buf);
+ free_netdev(net);
+err_out1:
+ return ret;
+}
+
+/*
+ * The current device is removed, the USB layer tell us to shut it down...
+ */
+static void kingsun_disconnect(struct usb_interface *intf)
+{
+ struct kingsun_cb *kingsun = usb_get_intfdata(intf);
+
+ if (!kingsun)
+ return;
+
+ unregister_netdev(kingsun->netdev);
+
+ /* Mop up receive && transmit urb's */
+ if (kingsun->tx_urb != NULL) {
+ usb_kill_urb(kingsun->tx_urb);
+ usb_free_urb(kingsun->tx_urb);
+ kingsun->tx_urb = NULL;
+ }
+ if (kingsun->rx_urb != NULL) {
+ usb_kill_urb(kingsun->rx_urb);
+ usb_free_urb(kingsun->rx_urb);
+ kingsun->rx_urb = NULL;
+ }
+
+ kfree(kingsun->out_buf);
+ kfree(kingsun->in_buf);
+ free_netdev(kingsun->netdev);
+
+ usb_set_intfdata(intf, NULL);
+}
+
+#ifdef CONFIG_PM
+/* USB suspend, so power off the transmitter/receiver */
+static int kingsun_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct kingsun_cb *kingsun = usb_get_intfdata(intf);
+
+ netif_device_detach(kingsun->netdev);
+ if (kingsun->tx_urb != NULL) usb_kill_urb(kingsun->tx_urb);
+ if (kingsun->rx_urb != NULL) usb_kill_urb(kingsun->rx_urb);
+ return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int kingsun_resume(struct usb_interface *intf)
+{
+ struct kingsun_cb *kingsun = usb_get_intfdata(intf);
+
+ if (kingsun->rx_urb != NULL)
+ usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
+ netif_device_attach(kingsun->netdev);
+
+ return 0;
+}
+#endif
+
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .name = "kingsun-sir",
+ .probe = kingsun_probe,
+ .disconnect = kingsun_disconnect,
+ .id_table = dongles,
+#ifdef CONFIG_PM
+ .suspend = kingsun_suspend,
+ .resume = kingsun_resume,
+#endif
+};
+
+/*
+ * Module insertion
+ */
+static int __init kingsun_init(void)
+{
+ return usb_register(&irda_driver);
+}
+module_init(kingsun_init);
+
+/*
+ * Module removal
+ */
+static void __exit kingsun_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+module_exit(kingsun_cleanup);
+
+MODULE_AUTHOR("Alex Villac�s Lasso <a_villacis@palosanto.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun/DonShine");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index acf1c80..af016d0 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -623,7 +623,7 @@
priv->eq_table.eq[MLX4_EQ_CATAS].have_irq = 1;
} else {
err = request_irq(dev->pdev->irq, mlx4_interrupt,
- SA_SHIRQ, DRV_NAME, dev);
+ IRQF_SHARED, DRV_NAME, dev);
if (err)
goto err_out_async;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 4e32bb6..2c5c6d2 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -735,7 +735,7 @@
}
adapter->irq = adapter->ahw.pdev->irq;
err = request_irq(adapter->ahw.pdev->irq, netxen_intr,
- SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name,
+ IRQF_SHARED|IRQF_SAMPLE_RANDOM, netdev->name,
adapter);
if (err) {
printk(KERN_ERR "request_irq failed with: %d\n", err);
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 74f8620..5d658bc 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -2,11 +2,9 @@
# PCMCIA Network device configuration
#
-menu "PCMCIA network device support"
- depends on NETDEVICES && PCMCIA!=n
-
-config NET_PCMCIA
+menuconfig NET_PCMCIA
bool "PCMCIA network device support"
+ depends on PCMCIA
---help---
Say Y if you would like to include support for any PCMCIA or CardBus
network adapters, then say Y to the driver for your particular card
@@ -21,9 +19,10 @@
If unsure, say N.
+if NET_PCMCIA
+
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
@@ -33,7 +32,6 @@
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -43,7 +41,6 @@
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
@@ -54,7 +51,6 @@
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
@@ -65,7 +61,6 @@
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
@@ -75,7 +70,6 @@
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
select CRC32
select MII
help
@@ -87,7 +81,6 @@
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
@@ -97,7 +90,6 @@
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
---help---
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
@@ -109,7 +101,7 @@
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
- depends on NET_PCMCIA && ARCNET_COM20020 && PCMCIA
+ depends on ARCNET_COM20020
help
Say Y here if you intend to attach this type of ARCnet PCMCIA card
to your computer.
@@ -119,7 +111,7 @@
config PCMCIA_IBMTR
tristate "IBM PCMCIA tokenring adapter support"
- depends on NET_PCMCIA && IBMTR!=y && TR && PCMCIA && !64BIT
+ depends on IBMTR!=y && TR && !64BIT
help
Say Y here if you intend to attach this type of Token Ring PCMCIA
card to your computer. You then also need to say Y to "Token Ring
@@ -128,5 +120,4 @@
To compile this driver as a module, choose M here: the module will be
called ibmtr_cs.
-endmenu
-
+endif # NET_PCMCIA
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index f994f12..09b6f25 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -2,69 +2,61 @@
# PHY Layer Configuration
#
-menu "PHY device support"
-
-config PHYLIB
+menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
+ depends on !S390
depends on NET_ETHERNET && (BROKEN || !S390)
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
managing PHY devices.
+if PHYLIB
+
comment "MII PHY device drivers"
- depends on PHYLIB
config MARVELL_PHY
tristate "Drivers for Marvell PHYs"
- depends on PHYLIB
---help---
Currently has a driver for the 88E1011S
config DAVICOM_PHY
tristate "Drivers for Davicom PHYs"
- depends on PHYLIB
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY
tristate "Drivers for Quality Semiconductor PHYs"
- depends on PHYLIB
---help---
Currently supports the qs6612
config LXT_PHY
tristate "Drivers for the Intel LXT PHYs"
- depends on PHYLIB
---help---
Currently supports the lxt970, lxt971
config CICADA_PHY
tristate "Drivers for the Cicada PHYs"
- depends on PHYLIB
---help---
Currently supports the cis8204
+
config VITESSE_PHY
tristate "Drivers for the Vitesse PHYs"
- depends on PHYLIB
---help---
Currently supports the vsc8244
config SMSC_PHY
tristate "Drivers for SMSC PHYs"
- depends on PHYLIB
---help---
Currently supports the LAN83C185 PHY
config BROADCOM_PHY
tristate "Drivers for Broadcom PHYs"
- depends on PHYLIB
---help---
Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
config FIXED_PHY
tristate "Drivers for PHY emulation on fixed speed/link"
- depends on PHYLIB
---help---
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
but with the ability to manipulate the speed/link in software. The relevant MII
@@ -79,5 +71,4 @@
bool "Emulation for 100M Fdx fixed PHY behavior"
depends on FIXED_PHY
-endmenu
-
+endif # PHYLIB
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 519baa3..7ed632d 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -139,7 +139,7 @@
return (err < 0) ? err : 0;
}
-static struct phy_driver dm9161_driver = {
+static struct phy_driver dm9161e_driver = {
.phy_id = 0x0181b880,
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
@@ -147,7 +147,18 @@
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.read_status = genphy_read_status,
- .driver = { .owner = THIS_MODULE,},
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver dm9161a_driver = {
+ .phy_id = 0x0181b8a0,
+ .name = "Davicom DM9161A",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config_init = dm9161_config_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
};
static struct phy_driver dm9131_driver = {
@@ -160,31 +171,38 @@
.read_status = genphy_read_status,
.ack_interrupt = dm9161_ack_interrupt,
.config_intr = dm9161_config_intr,
- .driver = { .owner = THIS_MODULE,},
+ .driver = { .owner = THIS_MODULE,},
};
static int __init davicom_init(void)
{
int ret;
- ret = phy_driver_register(&dm9161_driver);
+ ret = phy_driver_register(&dm9161e_driver);
if (ret)
goto err1;
- ret = phy_driver_register(&dm9131_driver);
+ ret = phy_driver_register(&dm9161a_driver);
if (ret)
goto err2;
+
+ ret = phy_driver_register(&dm9131_driver);
+ if (ret)
+ goto err3;
return 0;
- err2:
- phy_driver_unregister(&dm9161_driver);
+ err3:
+ phy_driver_unregister(&dm9161a_driver);
+ err2:
+ phy_driver_unregister(&dm9161e_driver);
err1:
return ret;
}
static void __exit davicom_exit(void)
{
- phy_driver_unregister(&dm9161_driver);
+ phy_driver_unregister(&dm9161e_driver);
+ phy_driver_unregister(&dm9161a_driver);
phy_driver_unregister(&dm9131_driver);
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 290e1c1..e3e6d41 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -84,7 +84,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.22.1"
+#define DRV_VERSION "2.0.23.1"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -281,6 +281,28 @@
("lro_out_of_sequence_pkts"),
("lro_flush_due_to_max_pkts"),
("lro_avg_aggr_pkts"),
+ ("mem_alloc_fail_cnt"),
+ ("watchdog_timer_cnt"),
+ ("mem_allocated"),
+ ("mem_freed"),
+ ("link_up_cnt"),
+ ("link_down_cnt"),
+ ("link_up_time"),
+ ("link_down_time"),
+ ("tx_tcode_buf_abort_cnt"),
+ ("tx_tcode_desc_abort_cnt"),
+ ("tx_tcode_parity_err_cnt"),
+ ("tx_tcode_link_loss_cnt"),
+ ("tx_tcode_list_proc_err_cnt"),
+ ("rx_tcode_parity_err_cnt"),
+ ("rx_tcode_abort_cnt"),
+ ("rx_tcode_parity_abort_cnt"),
+ ("rx_tcode_rda_fail_cnt"),
+ ("rx_tcode_unkn_prot_cnt"),
+ ("rx_tcode_fcs_err_cnt"),
+ ("rx_tcode_buf_size_err_cnt"),
+ ("rx_tcode_rxd_corrupt_cnt"),
+ ("rx_tcode_unkn_err_cnt")
};
#define S2IO_XENA_STAT_LEN sizeof(ethtool_xena_stats_keys)/ ETH_GSTRING_LEN
@@ -490,6 +512,7 @@
struct mac_info *mac_control;
struct config_param *config;
+ unsigned long long mem_allocated = 0;
mac_control = &nic->mac_control;
config = &nic->config;
@@ -519,6 +542,7 @@
"Malloc failed for list_info\n");
return -ENOMEM;
}
+ mem_allocated += list_holder_size;
memset(mac_control->fifos[i].list_info, 0, list_holder_size);
}
for (i = 0; i < config->tx_fifo_num; i++) {
@@ -565,6 +589,7 @@
DBG_PRINT(INFO_DBG, "failed for TxDL\n");
return -ENOMEM;
}
+ mem_allocated += PAGE_SIZE;
}
while (k < lst_per_page) {
int l = (j * lst_per_page) + k;
@@ -582,6 +607,7 @@
nic->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
if (!nic->ufo_in_band_v)
return -ENOMEM;
+ mem_allocated += (size * sizeof(u64));
/* Allocation and initialization of RXDs in Rings */
size = 0;
@@ -639,6 +665,7 @@
rx_blocks->block_virt_addr = tmp_v_addr;
return -ENOMEM;
}
+ mem_allocated += size;
memset(tmp_v_addr, 0, size);
rx_blocks->block_virt_addr = tmp_v_addr;
rx_blocks->block_dma_addr = tmp_p_addr;
@@ -647,6 +674,8 @@
GFP_KERNEL);
if (!rx_blocks->rxds)
return -ENOMEM;
+ mem_allocated +=
+ (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
for (l=0; l<rxd_count[nic->rxd_mode];l++) {
rx_blocks->rxds[l].virt_addr =
rx_blocks->block_virt_addr +
@@ -689,6 +718,7 @@
GFP_KERNEL);
if (!mac_control->rings[i].ba)
return -ENOMEM;
+ mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
for (j = 0; j < blk_cnt; j++) {
int k = 0;
mac_control->rings[i].ba[j] =
@@ -697,6 +727,8 @@
GFP_KERNEL);
if (!mac_control->rings[i].ba[j])
return -ENOMEM;
+ mem_allocated += (sizeof(struct buffAdd) * \
+ (rxd_count[nic->rxd_mode] + 1));
while (k != rxd_count[nic->rxd_mode]) {
ba = &mac_control->rings[i].ba[j][k];
@@ -704,6 +736,8 @@
(BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_0_org)
return -ENOMEM;
+ mem_allocated +=
+ (BUF0_LEN + ALIGN_SIZE);
tmp = (unsigned long)ba->ba_0_org;
tmp += ALIGN_SIZE;
tmp &= ~((unsigned long) ALIGN_SIZE);
@@ -713,6 +747,8 @@
(BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_1_org)
return -ENOMEM;
+ mem_allocated
+ += (BUF1_LEN + ALIGN_SIZE);
tmp = (unsigned long) ba->ba_1_org;
tmp += ALIGN_SIZE;
tmp &= ~((unsigned long) ALIGN_SIZE);
@@ -736,6 +772,7 @@
*/
return -ENOMEM;
}
+ mem_allocated += size;
mac_control->stats_mem_sz = size;
tmp_v_addr = mac_control->stats_mem;
@@ -743,7 +780,7 @@
memset(tmp_v_addr, 0, size);
DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
(unsigned long long) tmp_p_addr);
-
+ mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
return SUCCESS;
}
@@ -757,12 +794,14 @@
static void free_shared_mem(struct s2io_nic *nic)
{
int i, j, blk_cnt, size;
+ u32 ufo_size = 0;
void *tmp_v_addr;
dma_addr_t tmp_p_addr;
struct mac_info *mac_control;
struct config_param *config;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
+ int page_num = 0;
if (!nic)
return;
@@ -774,8 +813,9 @@
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
- int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
- lst_per_page);
+ ufo_size += config->tx_cfg[i].fifo_len;
+ page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
+ lst_per_page);
for (j = 0; j < page_num; j++) {
int mem_blks = (j * lst_per_page);
if (!mac_control->fifos[i].list_info)
@@ -790,6 +830,8 @@
mac_control->fifos[i].
list_info[mem_blks].
list_phy_addr);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += PAGE_SIZE;
}
/* If we got a zero DMA address during allocation,
* free the page now
@@ -803,8 +845,12 @@
dev->name);
DBG_PRINT(INIT_DBG, "Virtual address %p\n",
mac_control->zerodma_virt_addr);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += PAGE_SIZE;
}
kfree(mac_control->fifos[i].list_info);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
}
size = SIZE_OF_BLOCK;
@@ -819,7 +865,10 @@
break;
pci_free_consistent(nic->pdev, size,
tmp_v_addr, tmp_p_addr);
+ nic->mac_control.stats_info->sw_stat.mem_freed += size;
kfree(mac_control->rings[i].rx_blocks[j].rxds);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
}
}
@@ -836,12 +885,20 @@
struct buffAdd *ba =
&mac_control->rings[i].ba[j][k];
kfree(ba->ba_0_org);
+ nic->mac_control.stats_info->sw_stat.\
+ mem_freed += (BUF0_LEN + ALIGN_SIZE);
kfree(ba->ba_1_org);
+ nic->mac_control.stats_info->sw_stat.\
+ mem_freed += (BUF1_LEN + ALIGN_SIZE);
k++;
}
kfree(mac_control->rings[i].ba[j]);
+ nic->mac_control.stats_info->sw_stat.mem_freed += (sizeof(struct buffAdd) *
+ (rxd_count[nic->rxd_mode] + 1));
}
kfree(mac_control->rings[i].ba);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ (sizeof(struct buffAdd *) * blk_cnt);
}
}
@@ -850,9 +907,14 @@
mac_control->stats_mem_sz,
mac_control->stats_mem,
mac_control->stats_mem_phy);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ mac_control->stats_mem_sz;
}
- if (nic->ufo_in_band_v)
+ if (nic->ufo_in_band_v) {
kfree(nic->ufo_in_band_v);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (ufo_size * sizeof(u64));
+ }
}
/**
@@ -2122,10 +2184,12 @@
for (i = 0; i < config->tx_fifo_num; i++) {
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
- txdp = (struct TxD *) mac_control->fifos[i].list_info[j].
- list_virt_addr;
+ txdp = (struct TxD *) \
+ mac_control->fifos[i].list_info[j].list_virt_addr;
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
if (skb) {
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += skb->truesize;
dev_kfree_skb(skb);
cnt++;
}
@@ -2186,11 +2250,14 @@
/* skb_shinfo(skb)->frag_list will have L4 data payload */
skb_shinfo(skb)->frag_list = dev_alloc_skb(dev->mtu + ALIGN_SIZE);
if (skb_shinfo(skb)->frag_list == NULL) {
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n ", dev->name);
return -ENOMEM ;
}
frag_list = skb_shinfo(skb)->frag_list;
skb->truesize += frag_list->truesize;
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += frag_list->truesize;
frag_list->next = NULL;
tmp = (void *)ALIGN((long)frag_list->data, ALIGN_SIZE + 1);
frag_list->data = tmp;
@@ -2319,8 +2386,12 @@
wmb();
first_rxdp->Control_1 |= RXD_OWN_XENA;
}
+ nic->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM ;
}
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += skb->truesize;
if (nic->rxd_mode == RXD_MODE_1) {
/* 1 buffer mode - normal operation mode */
memset(rxdp, 0, sizeof(struct RxD1));
@@ -2328,7 +2399,8 @@
((struct RxD1*)rxdp)->Buffer0_ptr = pci_map_single
(nic->pdev, skb->data, size - NET_IP_ALIGN,
PCI_DMA_FROMDEVICE);
- rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
+ rxdp->Control_2 =
+ SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
} else if (nic->rxd_mode >= RXD_MODE_3A) {
/*
@@ -2342,7 +2414,7 @@
* payload
*/
- /* save the buffer pointers to avoid frequent dma mapping */
+ /* save buffer pointers to avoid frequent dma mapping */
Buffer0_ptr = ((struct RxD3*)rxdp)->Buffer0_ptr;
Buffer1_ptr = ((struct RxD3*)rxdp)->Buffer1_ptr;
memset(rxdp, 0, sizeof(struct RxD3));
@@ -2364,7 +2436,7 @@
PCI_DMA_FROMDEVICE);
else
pci_dma_sync_single_for_device(nic->pdev,
- (dma_addr_t) ((struct RxD3*)rxdp)->Buffer0_ptr,
+ (dma_addr_t) ((struct RxD3*)rxdp)->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
if (nic->rxd_mode == RXD_MODE_3B) {
@@ -2391,6 +2463,8 @@
} else {
/* 3 buffer mode */
if (fill_rxd_3buf(nic, rxdp, skb) == -ENOMEM) {
+ nic->mac_control.stats_info->sw_stat.\
+ mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
if (first_rxdp) {
wmb();
@@ -2491,6 +2565,7 @@
PCI_DMA_FROMDEVICE);
memset(rxdp, 0, sizeof(struct RxD3));
}
+ sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
dev_kfree_skb(skb);
atomic_dec(&sp->rx_bufs_left[ring_no]);
}
@@ -2820,13 +2895,35 @@
nic->mac_control.stats_info->sw_stat.
parity_err_cnt++;
}
- if ((err >> 48) == 0xA) {
- DBG_PRINT(TX_DBG, "TxD returned due \
- to loss of link\n");
- }
- else {
- DBG_PRINT(ERR_DBG, "***TxD error %llx\n", err);
- }
+
+ /* update t_code statistics */
+ err >>= 48;
+ switch(err) {
+ case 2:
+ nic->mac_control.stats_info->sw_stat.
+ tx_buf_abort_cnt++;
+ break;
+
+ case 3:
+ nic->mac_control.stats_info->sw_stat.
+ tx_desc_abort_cnt++;
+ break;
+
+ case 7:
+ nic->mac_control.stats_info->sw_stat.
+ tx_parity_err_cnt++;
+ break;
+
+ case 10:
+ nic->mac_control.stats_info->sw_stat.
+ tx_link_loss_cnt++;
+ break;
+
+ case 15:
+ nic->mac_control.stats_info->sw_stat.
+ tx_list_proc_err_cnt++;
+ break;
+ }
}
skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
@@ -2839,6 +2936,7 @@
/* Updating the statistics block */
nic->stats.tx_bytes += skb->len;
+ nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
get_info.offset++;
@@ -3314,7 +3412,9 @@
u16 subid, pci_cmd;
int i;
u16 val16;
- unsigned long long reset_cnt = 0;
+ unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
+ unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
+
DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
__FUNCTION__, sp->dev->name);
@@ -3380,11 +3480,26 @@
/* Reset device statistics maintained by OS */
memset(&sp->stats, 0, sizeof (struct net_device_stats));
- /* save reset count */
+
+ up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
+ down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
+ up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
+ down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
+ mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
+ mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
+ watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
+ /* save link up/down time/cnt, reset/memory/watchdog cnt */
memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
- /* restore reset count */
+ /* restore link up/down time/cnt, reset/memory/watchdog cnt */
+ sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
+ sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
+ sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
+ sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
+ sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
+ sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
+ sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
/* SXE-002: Configure link and activity LED to turn it off */
subid = sp->pdev->subsystem_device;
@@ -3672,19 +3787,29 @@
nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry),
GFP_KERNEL);
if (nic->entries == NULL) {
- DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
+ __FUNCTION__);
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
return -ENOMEM;
}
- memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ memset(nic->entries, 0,MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
nic->s2io_entries =
kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (nic->s2io_entries == NULL) {
- DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
+ __FUNCTION__);
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
kfree(nic->entries);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
return -ENOMEM;
}
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
memset(nic->s2io_entries, 0,
MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
@@ -3708,7 +3833,8 @@
rx_mat = readq(&bar0->rx_mat);
for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
rx_mat |= RX_MAT_SET(j, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].arg
+ = &nic->mac_control.rings[j];
nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
}
@@ -3717,7 +3843,8 @@
tx_mat = readq(&bar0->tx_mat0_n[7]);
for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
tx_mat |= TX_MAT_SET(i, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].arg
+ = &nic->mac_control.rings[j];
nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
}
@@ -3734,7 +3861,11 @@
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
kfree(nic->entries);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
kfree(nic->s2io_entries);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
nic->entries = NULL;
nic->s2io_entries = NULL;
nic->avail_msix_vectors = 0;
@@ -3802,10 +3933,16 @@
hw_init_failed:
if (sp->intr_type == MSI_X) {
- if (sp->entries)
+ if (sp->entries) {
kfree(sp->entries);
- if (sp->s2io_entries)
+ sp->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ }
+ if (sp->s2io_entries) {
kfree(sp->s2io_entries);
+ sp->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ }
}
return err;
}
@@ -3866,6 +4003,13 @@
config = &sp->config;
DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
+
+ if (unlikely(skb->len <= 0)) {
+ DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+ dev_kfree_skb_any(skb);
+ return 0;
+}
+
spin_lock_irqsave(&sp->tx_lock, flags);
if (atomic_read(&sp->card_state) == CARD_DOWN) {
DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
@@ -3876,7 +4020,6 @@
}
queue = 0;
-
/* Get Fifo number to Transmit based on vlan priority */
if (sp->vlgrp && vlan_tx_tag_present(skb)) {
vlan_tag = vlan_tx_tag_get(skb);
@@ -3900,14 +4043,6 @@
return 0;
}
- /* A buffer with no data will be dropped */
- if (!skb->len) {
- DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
- dev_kfree_skb(skb);
- spin_unlock_irqrestore(&sp->tx_lock, flags);
- return 0;
- }
-
offload_type = s2io_offload_type(skb);
if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
txdp->Control_1 |= TXD_TCP_LSO_EN;
@@ -4003,7 +4138,7 @@
put_off, get_off);
netif_stop_queue(dev);
}
-
+ mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
dev->trans_start = jiffies;
spin_unlock_irqrestore(&sp->tx_lock, flags);
@@ -4775,6 +4910,40 @@
return 0;
}
+static void s2io_ethtool_gringparam(struct net_device *dev,
+ struct ethtool_ringparam *ering)
+{
+ struct s2io_nic *sp = dev->priv;
+ int i,tx_desc_count=0,rx_desc_count=0;
+
+ if (sp->rxd_mode == RXD_MODE_1)
+ ering->rx_max_pending = MAX_RX_DESC_1;
+ else if (sp->rxd_mode == RXD_MODE_3B)
+ ering->rx_max_pending = MAX_RX_DESC_2;
+ else if (sp->rxd_mode == RXD_MODE_3A)
+ ering->rx_max_pending = MAX_RX_DESC_3;
+
+ ering->tx_max_pending = MAX_TX_DESC;
+ for (i = 0 ; i < sp->config.tx_fifo_num ; i++) {
+ tx_desc_count += sp->config.tx_cfg[i].fifo_len;
+ }
+ DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
+ ering->tx_pending = tx_desc_count;
+ rx_desc_count = 0;
+ for (i = 0 ; i < sp->config.rx_ring_num ; i++) {
+ rx_desc_count += sp->config.rx_cfg[i].num_rxd;
+ }
+ ering->rx_pending = rx_desc_count;
+
+ ering->rx_mini_max_pending = 0;
+ ering->rx_mini_pending = 0;
+ if(sp->rxd_mode == RXD_MODE_1)
+ ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
+ else if (sp->rxd_mode == RXD_MODE_3B)
+ ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
+ ering->rx_jumbo_pending = rx_desc_count;
+}
+
/**
* s2io_ethtool_getpause_data -Pause frame frame generation and reception.
* @sp : private member of the device structure, which is a pointer to the
@@ -4981,8 +5150,11 @@
strcpy(nic->serial_num, "NOT AVAILABLE");
vpd_data = kmalloc(256, GFP_KERNEL);
- if (!vpd_data)
+ if (!vpd_data) {
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
return;
+ }
+ nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
for (i = 0; i < 256; i +=4 ) {
pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
@@ -5022,6 +5194,7 @@
memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
}
kfree(vpd_data);
+ nic->mac_control.stats_info->sw_stat.mem_freed += 256;
}
/**
@@ -5742,6 +5915,30 @@
}
else
tmp_stats[i++] = 0;
+ tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
+ tmp_stats[i++] = stat_info->sw_stat.mem_freed;
+ tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.link_up_time;
+ tmp_stats[i++] = stat_info->sw_stat.link_down_time;
+
+ tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
+
+ tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
}
static int s2io_ethtool_get_regs_len(struct net_device *dev)
@@ -5854,6 +6051,7 @@
.get_eeprom_len = s2io_get_eeprom_len,
.get_eeprom = s2io_ethtool_geeprom,
.set_eeprom = s2io_ethtool_seeprom,
+ .get_ringparam = s2io_ethtool_gringparam,
.get_pauseparam = s2io_ethtool_getpause_data,
.set_pauseparam = s2io_ethtool_setpause_data,
.get_rx_csum = s2io_ethtool_get_rx_csum,
@@ -5962,7 +6160,7 @@
if (ret == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s: Out of ",
dev->name);
- DBG_PRINT(ERR_DBG, "memory in tasklet\n");
+ DBG_PRINT(INFO_DBG, "memory in tasklet\n");
break;
} else if (ret == -EFILL) {
DBG_PRINT(INFO_DBG,
@@ -6077,9 +6275,14 @@
*skb = dev_alloc_skb(size);
if (!(*skb)) {
DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
+ DBG_PRINT(INFO_DBG, "memory to allocate ");
+ DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM ;
}
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += (*skb)->truesize;
/* storing the mapped addr in a temp variable
* such it will be used for next rxd whose
* Host Control is NULL
@@ -6099,10 +6302,15 @@
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n",
- dev->name);
+ DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(INFO_DBG, "memory to allocate ");
+ DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM;
}
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += (*skb)->truesize;
((struct RxD3*)rxdp)->Buffer2_ptr = *temp2 =
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
@@ -6126,10 +6334,15 @@
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n",
- dev->name);
+ DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(INFO_DBG, "memory to allocate ");
+ DBG_PRINT(INFO_DBG, "3 buf mode SKBs\n");
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM;
}
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += (*skb)->truesize;
((struct RxD3*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
@@ -6147,10 +6360,14 @@
if (skb_shinfo(*skb)->frag_list == NULL) {
DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb \
failed\n ", dev->name);
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM ;
}
frag_list = skb_shinfo(*skb)->frag_list;
frag_list->next = NULL;
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += frag_list->truesize;
/*
* Buffer-2 receives L4 data payload
*/
@@ -6566,6 +6783,7 @@
struct s2io_nic *sp = dev->priv;
if (netif_carrier_ok(dev)) {
+ sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
schedule_work(&sp->rst_timer_task);
sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
}
@@ -6606,7 +6824,53 @@
if (err & 0x1) {
sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
}
+ err >>= 48;
+ switch(err) {
+ case 1:
+ sp->mac_control.stats_info->sw_stat.
+ rx_parity_err_cnt++;
+ break;
+ case 2:
+ sp->mac_control.stats_info->sw_stat.
+ rx_abort_cnt++;
+ break;
+
+ case 3:
+ sp->mac_control.stats_info->sw_stat.
+ rx_parity_abort_cnt++;
+ break;
+
+ case 4:
+ sp->mac_control.stats_info->sw_stat.
+ rx_rda_fail_cnt++;
+ break;
+
+ case 5:
+ sp->mac_control.stats_info->sw_stat.
+ rx_unkn_prot_cnt++;
+ break;
+
+ case 6:
+ sp->mac_control.stats_info->sw_stat.
+ rx_fcs_err_cnt++;
+ break;
+
+ case 7:
+ sp->mac_control.stats_info->sw_stat.
+ rx_buf_size_err_cnt++;
+ break;
+
+ case 8:
+ sp->mac_control.stats_info->sw_stat.
+ rx_rxd_corrupt_cnt++;
+ break;
+
+ case 15:
+ sp->mac_control.stats_info->sw_stat.
+ rx_unkn_err_cnt++;
+ break;
+ }
/*
* Drop the packet if bad transfer code. Exception being
* 0x5, which could be due to unsupported IPv6 extension header.
@@ -6614,10 +6878,12 @@
* Note that in this case, since checksum will be incorrect,
* stack will validate the same.
*/
- if (err && ((err >> 48) != 0x5)) {
+ if (err != 0x5) {
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
dev->name, err);
sp->stats.rx_crc_errors++;
+ sp->mac_control.stats_info->sw_stat.mem_freed
+ += skb->truesize;
dev_kfree_skb(skb);
atomic_dec(&sp->rx_bufs_left[ring_no]);
rxdp->Host_Control = 0;
@@ -6627,7 +6893,6 @@
/* Updating statistics */
rxdp->Host_Control = 0;
- sp->stats.rx_packets++;
if (sp->rxd_mode == RXD_MODE_1) {
int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
@@ -6731,7 +6996,7 @@
} else {
skb->ip_summed = CHECKSUM_NONE;
}
-
+ sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
if (!sp->lro) {
skb->protocol = eth_type_trans(skb, dev);
if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
@@ -6780,12 +7045,21 @@
if (link == LINK_DOWN) {
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
netif_carrier_off(dev);
+ if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
+ sp->mac_control.stats_info->sw_stat.link_up_time =
+ jiffies - sp->start_time;
+ sp->mac_control.stats_info->sw_stat.link_down_cnt++;
} else {
DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
+ if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
+ sp->mac_control.stats_info->sw_stat.link_down_time =
+ jiffies - sp->start_time;
+ sp->mac_control.stats_info->sw_stat.link_up_cnt++;
netif_carrier_on(dev);
}
}
sp->last_link_state = link;
+ sp->start_time = jiffies;
}
/**
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index a656d18..54baa0b 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -95,6 +95,32 @@
unsigned long long flush_max_pkts;
unsigned long long sum_avg_pkts_aggregated;
unsigned long long num_aggregations;
+ /* Other statistics */
+ unsigned long long mem_alloc_fail_cnt;
+ unsigned long long watchdog_timer_cnt;
+ unsigned long long mem_allocated;
+ unsigned long long mem_freed;
+ unsigned long long link_up_cnt;
+ unsigned long long link_down_cnt;
+ unsigned long long link_up_time;
+ unsigned long long link_down_time;
+
+ /* Transfer Code statistics */
+ unsigned long long tx_buf_abort_cnt;
+ unsigned long long tx_desc_abort_cnt;
+ unsigned long long tx_parity_err_cnt;
+ unsigned long long tx_link_loss_cnt;
+ unsigned long long tx_list_proc_err_cnt;
+
+ unsigned long long rx_parity_err_cnt;
+ unsigned long long rx_abort_cnt;
+ unsigned long long rx_parity_abort_cnt;
+ unsigned long long rx_rda_fail_cnt;
+ unsigned long long rx_unkn_prot_cnt;
+ unsigned long long rx_fcs_err_cnt;
+ unsigned long long rx_buf_size_err_cnt;
+ unsigned long long rx_rxd_corrupt_cnt;
+ unsigned long long rx_unkn_err_cnt;
};
/* Xpak releated alarm and warnings */
@@ -308,6 +334,11 @@
#define MAX_TX_FIFOS 8
#define MAX_RX_RINGS 8
+#define MAX_RX_DESC_1 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 )
+#define MAX_RX_DESC_2 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_RX_DESC_3 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_TX_DESC (MAX_AVAILABLE_TXDS)
+
/* FIFO mappings for all possible number of fifos configured */
static int fifo_map[][MAX_TX_FIFOS] = {
{0, 0, 0, 0, 0, 0, 0, 0},
@@ -819,6 +850,7 @@
#define LINK_UP 2
int task_flag;
+ unsigned long long start_time;
#define CARD_DOWN 1
#define CARD_UP 2
atomic_t card_state;
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 1fc7730..2106bec 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -16,11 +16,13 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
+#include <linux/platform_device.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
+#include <asm/sgi/seeq.h>
#include "sgiseeq.h"
@@ -92,13 +94,9 @@
struct net_device_stats stats;
- struct net_device *next_module;
spinlock_t tx_lock;
};
-/* A list of all installed seeq devices, for removing the driver module. */
-static struct net_device *root_sgiseeq_dev;
-
static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs)
{
hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ;
@@ -624,9 +622,12 @@
#define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf))
-static int sgiseeq_init(struct hpc3_regs* hpcregs, int irq, int has_eeprom)
+static int __init sgiseeq_probe(struct platform_device *pdev)
{
+ struct sgiseeq_platform_data *pd = pdev->dev.platform_data;
+ struct hpc3_regs *hpcregs = pd->hpc;
struct sgiseeq_init_block *sr;
+ unsigned int irq = pd->irq;
struct sgiseeq_private *sp;
struct net_device *dev;
int err, i;
@@ -637,6 +638,8 @@
err = -ENOMEM;
goto err_out;
}
+
+ platform_set_drvdata(pdev, dev);
sp = netdev_priv(dev);
/* Make private data page aligned */
@@ -648,15 +651,7 @@
}
sp->srings = sr;
-#define EADDR_NVOFS 250
- for (i = 0; i < 3; i++) {
- unsigned short tmp = has_eeprom ?
- ip22_eeprom_read(&hpcregs->eeprom, EADDR_NVOFS / 2+i) :
- ip22_nvram_read(EADDR_NVOFS / 2+i);
-
- dev->dev_addr[2 * i] = tmp >> 8;
- dev->dev_addr[2 * i + 1] = tmp & 0xff;
- }
+ memcpy(dev->dev_addr, pd->mac, ETH_ALEN);
#ifdef DEBUG
gpriv = sp;
@@ -720,9 +715,6 @@
for (i = 0; i < 6; i++)
printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
- sp->next_module = root_sgiseeq_dev;
- root_sgiseeq_dev = dev;
-
return 0;
err_out_free_page:
@@ -734,43 +726,42 @@
return err;
}
-static int __init sgiseeq_probe(void)
+static void __exit sgiseeq_remove(struct platform_device *pdev)
{
- unsigned int tmp, ret1, ret2 = 0;
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct sgiseeq_private *sp = netdev_priv(dev);
- /* On board adapter on 1st HPC is always present */
- ret1 = sgiseeq_init(hpc3c0, SGI_ENET_IRQ, 0);
- /* Let's see if second HPC is there */
- if (!(ip22_is_fullhouse()) &&
- get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]) == 0) {
- sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 |
- SGIMC_GIOPAR_EXP164 |
- SGIMC_GIOPAR_HPC264;
- hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
- /* interrupt/config register on Challenge S Mezz board */
- hpc3c1->pbus_extregs[0][0] = 0x30;
- ret2 = sgiseeq_init(hpc3c1, SGI_GIO_0_IRQ, 1);
- }
-
- return (ret1 & ret2) ? ret1 : 0;
+ unregister_netdev(dev);
+ free_page((unsigned long) sp->srings);
+ free_netdev(dev);
+ platform_set_drvdata(pdev, NULL);
}
-static void __exit sgiseeq_exit(void)
-{
- struct net_device *next, *dev;
- struct sgiseeq_private *sp;
-
- for (dev = root_sgiseeq_dev; dev; dev = next) {
- sp = (struct sgiseeq_private *) netdev_priv(dev);
- next = sp->next_module;
- unregister_netdev(dev);
- free_page((unsigned long) sp->srings);
- free_netdev(dev);
+static struct platform_driver sgiseeq_driver = {
+ .probe = sgiseeq_probe,
+ .remove = __devexit_p(sgiseeq_remove),
+ .driver = {
+ .name = "sgiseeq"
}
+};
+
+static int __init sgiseeq_module_init(void)
+{
+ if (platform_driver_register(&sgiseeq_driver)) {
+ printk(KERN_ERR "Driver registration failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
}
-module_init(sgiseeq_probe);
-module_exit(sgiseeq_exit);
+static void __exit sgiseeq_module_exit(void)
+{
+ platform_driver_unregister(&sgiseeq_driver);
+}
+
+module_init(sgiseeq_module_init);
+module_exit(sgiseeq_module_exit);
MODULE_DESCRIPTION("SGI Seeq 8003 driver");
MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@linux-mips.org>");
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index e048957..7766929 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3802,6 +3802,9 @@
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err, wol = 0;
+ if (!hw)
+ return 0;
+
err = pci_save_state(pdev);
if (err)
return err;
@@ -3830,6 +3833,9 @@
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
+ if (!hw)
+ return 0;
+
err = pci_set_power_state(pdev, PCI_D0);
if (err)
goto out;
@@ -3868,6 +3874,9 @@
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
+ if (!hw)
+ return;
+
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct skge_port *skge = netdev_priv(dev);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a307310..104e204 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -40,6 +40,7 @@
#include <linux/if_vlan.h>
#include <linux/prefetch.h>
#include <linux/mii.h>
+#include <linux/dmi.h>
#include <asm/irq.h>
@@ -130,7 +131,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+// { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
{ 0 }
};
@@ -150,6 +151,8 @@
"FE", /* 0xb7 */
};
+static int dmi_blacklisted;
+
/* Access to external PHY */
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
{
@@ -2531,6 +2534,17 @@
return -EOPNOTSUPP;
}
+
+ /* Some Gigabyte motherboards have 88e8056 but cause problems
+ * There is some unresolved hardware related problem that causes
+ * descriptor errors and receive data corruption.
+ */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && dmi_blacklisted) {
+ dev_err(&hw->pdev->dev,
+ "88E8056 on this motherboard not supported\n");
+ return -EOPNOTSUPP;
+ }
+
hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
@@ -3578,17 +3592,6 @@
goto err_out;
}
- /* Some Gigabyte motherboards have 88e8056 but cause problems
- * There is some unresolved hardware related problem that causes
- * descriptor errors and receive data corruption.
- */
- if (pdev->vendor == PCI_VENDOR_ID_MARVELL &&
- pdev->device == 0x4364 && pdev->subsystem_vendor == 0x1458) {
- dev_err(&pdev->dev,
- "88E8056 on Gigabyte motherboards not supported\n");
- goto err_out_disable;
- }
-
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@@ -3732,6 +3735,7 @@
err_out_disable:
pci_disable_device(pdev);
err_out:
+ pci_set_drvdata(pdev, NULL);
return err;
}
@@ -3784,6 +3788,9 @@
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
+ if (!hw)
+ return 0;
+
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
@@ -3815,6 +3822,9 @@
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, err;
+ if (!hw)
+ return 0;
+
err = pci_set_power_state(pdev, PCI_D0);
if (err)
goto out;
@@ -3861,6 +3871,9 @@
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
+ if (!hw)
+ return;
+
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
@@ -3897,8 +3910,24 @@
.shutdown = sky2_shutdown,
};
+static struct dmi_system_id __initdata broken_dmi_table[] = {
+ {
+ .ident = "Gigabyte 965P-S3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "965P-S3"),
+
+ },
+ },
+ { }
+};
+
static int __init sky2_init_module(void)
{
+ /* Look for sick motherboards */
+ if (dmi_check_system(broken_dmi_table))
+ dmi_blacklisted = 1;
+
return pci_register_driver(&sky2_driver);
}
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index c15e972..108adbf 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -175,12 +175,10 @@
{
struct mii_phy *phy = &card->phy;
u32 advertise = 0;
- u16 bmcr, bmsr, stat1000, estat;
+ u16 bmsr, estat;
- bmcr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMCR);
- bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
- stat1000 = spider_net_read_phy(card->netdev, phy->mii_id, MII_STAT1000);
- estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
+ bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
+ estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
if (bmsr & BMSR_10HALF)
advertise |= ADVERTISED_10baseT_Half;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index d7aff81..0f66765 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -293,7 +293,7 @@
else {
init_enet_offset =
qe_muram_alloc(thread_size, thread_alignment);
- if (IS_MURAM_ERR(init_enet_offset)) {
+ if (IS_ERR_VALUE(init_enet_offset)) {
ugeth_err
("fill_init_enet_entries: Can not allocate DPRAM memory.");
qe_put_snum((u8) snum);
@@ -2594,7 +2594,7 @@
ugeth->tx_bd_ring_offset[j] =
qe_muram_alloc(length,
UCC_GETH_TX_BD_RING_ALIGNMENT);
- if (!IS_MURAM_ERR(ugeth->tx_bd_ring_offset[j]))
+ if (!IS_ERR_VALUE(ugeth->tx_bd_ring_offset[j]))
ugeth->p_tx_bd_ring[j] =
(u8 *) qe_muram_addr(ugeth->
tx_bd_ring_offset[j]);
@@ -2629,7 +2629,7 @@
ugeth->rx_bd_ring_offset[j] =
qe_muram_alloc(length,
UCC_GETH_RX_BD_RING_ALIGNMENT);
- if (!IS_MURAM_ERR(ugeth->rx_bd_ring_offset[j]))
+ if (!IS_ERR_VALUE(ugeth->rx_bd_ring_offset[j]))
ugeth->p_rx_bd_ring[j] =
(u8 *) qe_muram_addr(ugeth->
rx_bd_ring_offset[j]);
@@ -2713,7 +2713,7 @@
ugeth->tx_glbl_pram_offset =
qe_muram_alloc(sizeof(struct ucc_geth_tx_global_pram),
UCC_GETH_TX_GLOBAL_PRAM_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->tx_glbl_pram_offset)) {
+ if (IS_ERR_VALUE(ugeth->tx_glbl_pram_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_tx_glbl_pram.",
__FUNCTION__);
@@ -2735,7 +2735,7 @@
sizeof(struct ucc_geth_thread_data_tx) +
32 * (numThreadsTxNumerical == 1),
UCC_GETH_THREAD_DATA_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->thread_dat_tx_offset)) {
+ if (IS_ERR_VALUE(ugeth->thread_dat_tx_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_thread_data_tx.",
__FUNCTION__);
@@ -2763,7 +2763,7 @@
qe_muram_alloc(ug_info->numQueuesTx *
sizeof(struct ucc_geth_send_queue_qd),
UCC_GETH_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->send_q_mem_reg_offset)) {
+ if (IS_ERR_VALUE(ugeth->send_q_mem_reg_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_send_q_mem_reg.",
__FUNCTION__);
@@ -2806,7 +2806,7 @@
ugeth->scheduler_offset =
qe_muram_alloc(sizeof(struct ucc_geth_scheduler),
UCC_GETH_SCHEDULER_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->scheduler_offset)) {
+ if (IS_ERR_VALUE(ugeth->scheduler_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_scheduler.",
__FUNCTION__);
@@ -2854,7 +2854,7 @@
qe_muram_alloc(sizeof
(struct ucc_geth_tx_firmware_statistics_pram),
UCC_GETH_TX_STATISTICS_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->tx_fw_statistics_pram_offset)) {
+ if (IS_ERR_VALUE(ugeth->tx_fw_statistics_pram_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for"
" p_tx_fw_statistics_pram.", __FUNCTION__);
@@ -2893,7 +2893,7 @@
ugeth->rx_glbl_pram_offset =
qe_muram_alloc(sizeof(struct ucc_geth_rx_global_pram),
UCC_GETH_RX_GLOBAL_PRAM_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->rx_glbl_pram_offset)) {
+ if (IS_ERR_VALUE(ugeth->rx_glbl_pram_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_rx_glbl_pram.",
__FUNCTION__);
@@ -2914,7 +2914,7 @@
qe_muram_alloc(numThreadsRxNumerical *
sizeof(struct ucc_geth_thread_data_rx),
UCC_GETH_THREAD_DATA_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->thread_dat_rx_offset)) {
+ if (IS_ERR_VALUE(ugeth->thread_dat_rx_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_thread_data_rx.",
__FUNCTION__);
@@ -2937,7 +2937,7 @@
qe_muram_alloc(sizeof
(struct ucc_geth_rx_firmware_statistics_pram),
UCC_GETH_RX_STATISTICS_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->rx_fw_statistics_pram_offset)) {
+ if (IS_ERR_VALUE(ugeth->rx_fw_statistics_pram_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for"
" p_rx_fw_statistics_pram.", __FUNCTION__);
@@ -2959,7 +2959,7 @@
qe_muram_alloc(ug_info->numQueuesRx *
sizeof(struct ucc_geth_rx_interrupt_coalescing_entry)
+ 4, UCC_GETH_RX_INTERRUPT_COALESCING_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->rx_irq_coalescing_tbl_offset)) {
+ if (IS_ERR_VALUE(ugeth->rx_irq_coalescing_tbl_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for"
" p_rx_irq_coalescing_tbl.", __FUNCTION__);
@@ -3027,7 +3027,7 @@
(sizeof(struct ucc_geth_rx_bd_queues_entry) +
sizeof(struct ucc_geth_rx_prefetched_bds)),
UCC_GETH_RX_BD_QUEUES_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->rx_bd_qs_tbl_offset)) {
+ if (IS_ERR_VALUE(ugeth->rx_bd_qs_tbl_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_rx_bd_qs_tbl.",
__FUNCTION__);
@@ -3116,7 +3116,7 @@
ugeth->exf_glbl_param_offset =
qe_muram_alloc(sizeof(struct ucc_geth_exf_global_pram),
UCC_GETH_RX_EXTENDED_FILTERING_GLOBAL_PARAMETERS_ALIGNMENT);
- if (IS_MURAM_ERR(ugeth->exf_glbl_param_offset)) {
+ if (IS_ERR_VALUE(ugeth->exf_glbl_param_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for"
" p_exf_glbl_param.", __FUNCTION__);
@@ -3258,7 +3258,7 @@
/* Allocate InitEnet command parameter structure */
init_enet_pram_offset = qe_muram_alloc(sizeof(struct ucc_geth_init_pram), 4);
- if (IS_MURAM_ERR(init_enet_pram_offset)) {
+ if (IS_ERR_VALUE(init_enet_pram_offset)) {
ugeth_err
("%s: Can not allocate DPRAM memory for p_init_enet_pram.",
__FUNCTION__);
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 8897f53..4fc8681 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -2,10 +2,7 @@
# wan devices configuration
#
-menu "Wan interfaces"
- depends on NETDEVICES
-
-config WAN
+menuconfig WAN
bool "Wan interfaces support"
---help---
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
@@ -23,10 +20,12 @@
If unsure, say N.
+if WAN
+
# There is no way to detect a comtrol sv11 - force it modular for now.
config HOSTESS_SV11
tristate "Comtrol Hostess SV-11 support"
- depends on WAN && ISA && m && ISA_DMA_API && INET
+ depends on ISA && m && ISA_DMA_API && INET
help
Driver for Comtrol Hostess SV-11 network card which
operates on low speed synchronous serial links at up to
@@ -38,7 +37,7 @@
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
- depends on WAN && ISA && m && ISA_DMA_API
+ depends on ISA && m && ISA_DMA_API
---help---
Driver for COSA and SRP synchronous serial boards.
@@ -62,7 +61,7 @@
#
config LANMEDIA
tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
- depends on WAN && PCI
+ depends on PCI
---help---
Driver for the following Lan Media family of serial boards:
@@ -89,7 +88,7 @@
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && ISA && m && ISA_DMA_API && INET
+ depends on ISA && m && ISA_DMA_API && INET
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
@@ -99,7 +98,6 @@
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
- depends on WAN
help
Say Y to this option if your Linux box contains a WAN (Wide Area
Network) card supported by this driver and you are planning to
@@ -167,7 +165,7 @@
If unsure, say N.
comment "X.25/LAPB support is disabled"
- depends on WAN && HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
+ depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
config PCI200SYN
tristate "Goramo PCI200SYN support"
@@ -230,10 +228,10 @@
Multilink PPP over the PC300 synchronous communication boards.
comment "Cyclades-PC300 MLPPP support is disabled."
- depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+ depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
comment "Refer to the file README.mlppp, provided by PC300 package."
- depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+ depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
config PC300TOO
tristate "Cyclades PC300 RSV/X21 alternative support"
@@ -338,7 +336,6 @@
config DLCI
tristate "Frame Relay DLCI support"
- depends on WAN
---help---
Support for the Frame Relay protocol.
@@ -385,7 +382,7 @@
# Wan router core.
config WAN_ROUTER_DRIVERS
tristate "WAN router drivers"
- depends on WAN && WAN_ROUTER
+ depends on WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
@@ -440,7 +437,7 @@
# X.25 network drivers
config LAPBETHER
tristate "LAPB over Ethernet driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on LAPB && X25
---help---
Driver for a pseudo device (typically called /dev/lapb0) which allows
you to open an LAPB point-to-point connection to some other computer
@@ -456,7 +453,7 @@
config X25_ASY
tristate "X.25 async driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on LAPB && X25
---help---
Send and receive X.25 frames over regular asynchronous serial
lines such as telephone lines equipped with ordinary modems.
@@ -471,7 +468,7 @@
config SBNI
tristate "Granch SBNI12 Leased Line adapter support"
- depends on WAN && X86
+ depends on X86
---help---
Driver for ISA SBNI12-xx cards which are low cost alternatives to
leased line modems.
@@ -497,5 +494,4 @@
If unsure, say N.
-endmenu
-
+endif # WAN
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index e273347..e3f5bb0 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -3,6 +3,7 @@
#
menu "Wireless LAN"
+ depends on !S390
config WLAN_PRE80211
bool "Wireless LAN (pre-802.11)"
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index 19c9350..56a8ea1 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -1,5 +1,3 @@
-# EXTRA_CFLAGS += -Wpacked
-
usb8xxx-objs := main.o fw.o wext.o \
rx.o tx.o cmd.o \
cmdresp.o scan.o \
@@ -7,13 +5,6 @@
ioctl.o debugfs.o \
ethtool.o assoc.o
-ifeq ($(CONFIG_LIBERTAS_USB_DEBUG), y)
-EXTRA_CFLAGS += -DDEBUG -DPROC_DEBUG
-endif
-
-
-# This is needed to support the newer boot2 bootloader (v >= 3104)
-EXTRA_CFLAGS += -DSUPPORT_BOOT_COMMAND
usb8xxx-objs += if_bootcmd.o
usb8xxx-objs += if_usb.o
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 688da4c..3785772 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -40,64 +40,11 @@
SYNOPSIS
iwpriv <ethX> <command> [sub-command] ...
- iwpriv ethX version
- iwpriv ethX scantype [sub-command]
- iwpriv ethX getSNR <n>
- iwpriv ethX getNF <n>
- iwpriv ethX getRSSI <n>
- iwpriv ethX setrxant <n>
- iwpriv ethX getrxant
- iwpriv ethX settxant <n>
- iwpriv ethX gettxant
- iwpriv ethX authalgs <n>
- iwpriv ethX pre-TBTT <n>
- iwpriv ethX 8021xauthalgs <n>
- iwpriv ethX encryptionmode <n>
iwpriv ethX setregioncode <n>
iwpriv ethX getregioncode
- iwpriv ethX setbcnavg <n>
- iwpriv ethX getbcnavg
- iwpriv ethX setdataavg <n>
- iwpriv ethX setlisteninter <n>
- iwpriv ethX getlisteninter
- iwpriv ethX setmultipledtim <n>
- iwpriv ethX getmultipledtim
- iwpriv ethX atimwindow <n>
- iwpriv ethX deauth
- iwpriv ethX adhocstop
- iwpriv ethX radioon
- iwpriv ethX radiooff
- iwpriv ethX reasso-on
- iwpriv ethX reasso-off
- iwpriv ethX scanmode [sub-command]
- iwpriv ethX setwpaie <n>
- iwpriv ethX wlanidle-off
- iwpriv ethX wlanidle-on
- iwpriv ethX getcis
- iwpriv ethX getlog
- iwpriv ethX getadhocstatus
- iwpriv ethX adhocgrate <n>
-
-Version 4 Command:
- iwpriv ethX inactvityto <n>
- iwpriv ethX sleeppd <n>
- iwpriv ethX enable11d <n>
- iwpriv ethX tpccfg <n>
- iwpriv ethX powercfg <n>
- iwpriv ethX setafc <n>
- iwpriv ethX getafc
Version 5 Command:
iwpriv ethX ledgpio <n>
- iwpriv ethX scanprobes <n>
- iwpriv ethX lolisteninter <n>
- iwpriv ethX rateadapt <n> <m>
- iwpriv ethX txcontrol <n>
- iwpriv ethX psnullinterval <n>
- iwpriv ethX prescan <n>
- iwpriv ethX getrxinfo
- iwpriv ethX gettxrate
- iwpriv ethX beaconinterval
BT Commands:
The blinding table (BT) contains a list of mac addresses that should be
@@ -150,114 +97,6 @@
The ethX parameter specifies the network device that is to be used to
perform this command on. it could be eth0, eth1 etc.
-version
- This is used to get the current version of the driver and the firmware.
-
-scantype
- This command is used to set the scan type to be used by the driver in
- the scan command. This setting will not be used while performing a scan
- for a specific SSID, as it is always done with scan type being active.
-
- where the sub-commands are: -
- active -- to set the scan type to active
- passive -- to set the scan type to passive
- get -- to get the scan type set in the driver
-
-getSNR
- This command gets the average and non average value of Signal to Noise
- Ratio of Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- If no value is given, all four values are returned in the order mentioned
- above.
-
- Note: This command is available only when STA is connected.
-
-getRSSI
- This command gets the average and non average value os Receive Signal
- Strength of Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- Note: This command is available only when STA is connected.
-
-getNF
- This command gets the average and non average value of Noise Floor of
- Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- Note: This command is available only when STA is connected.
-
-setrxant
- This command is used to set the mode for Rx antenna.
-
- The options that can be sent are:-
- 1 -- Antenna 1.
- 2 -- Antenna 2.
- 0xFFFF -- Diversity.
-
- Usage:
- iwpriv ethX setrxant 0x01: select Antenna 1.
-
-getrxant
- This command is used to get the mode for Rx antenna.
-
-
-settxant
- This command is used to set the mode for Tx antenna.
- The options that can be sent are:-
- 1 -- Antenna 1.
- 2 -- Antenna 2.
- 0xFFFF -- Diversity.
- Usage:
- iwpriv ethX settxant 0x01: select Antenna 1.
-
-gettxant
- This command is used to get the mode for Tx antenna.
-
-authalgs
- This command is used by the WPA supplicant to set the authentication
- algorithms in the station.
-
-8021xauthalgs
- This command is used by the WPA supplicant to set the 8021.x authentication algorithm type
- station.
-
- where values can be:-
- 1 -- None
- 2 -- LEAP
- 4 -- TLS
- 8 -- TTLs
- 16 -- MD5
-
-
-encryptionmode
- This command is used by the WPA supplicant to set the encryption algorithm.
-
- where values can be:-
- 0 -- NONE
- 1 -- WEP40
- 2 -- TKIP
- 3 -- CCMP
- 4 -- WEP104
-
-pre-TBTT
- This command is used to set pre-TBTT time period where value is in microseconds.
-
setregioncode
This command is used to set the region code in the station.
where value is 'region code' for various regions like
@@ -270,114 +109,6 @@
This command is used to get the region code information set in the
station.
-setbcnavg
- Set the weighting factor for calculating RSSI.
-
-getbcnavg
- Get weighting factor for calculating RSSI.
-
-setdataavg
- Set the weighting factor for calculating SNR.
-
-setlisteninter
- This command is used to set the listen interval in the
- station.
-
- where the value ranges between 1 - 255
-
-getlisteninter
- This command is used to get the listen interval value set in the
- station.
-
-setmultipledtim
- This command is used to set the multiple dtim value in the
- station.
- where the value is 1,2,3,4,5,0xfffe
- 0xfffe means the firmware will use listen interval in association
- command for waking up
-
-getmultipledtim
- This command is used to get the multiple dtim value set in the station.
-
-atimwindow
- This command is used to set the atim value in the
- station.
-
- where the value ranges between 0 - 50
-
-deauth
- This command is used to send the de-authentication to the AP with which
- the station is associated. This command is valid only when
- station is in Infrastructure mode.
-
- Note: This command is available only when STA is connected.
-
-adhocstop
- This command is used to stop beacon transmission from the station and
- go into idle state in ad-hoc mode.
-
- Note: This command is available only when STA is connected.
-
-radioon
- This command is used to turn on the RF antenna.
-
-radiooff
- This command is sued to turn off the RF antenna.
-
-scanmode
- This command is used to set the station to scan for either IBSS
- networks or BSS networks or both BSS and IBSS networks. This
- command can be used with sub commands,
-
- where the value for
- bss -- Scan All the BSS networks.
- ibss -- Scan All the IBSS networks.
- any -- Scan both BSS and IBSS networks.
-
-
-
-setwpaie
- This command is used by WPA supplicant to send the WPA-IE to the driver.
-
-wlanidle-off
- This command is used to get into idle state.
-
- Note: This command is available only when STA is connected.
-
-wlanidle-on
- This command is used to get off the idle state.
-
- Note: This command is available only when STA is connected.
-
-
-getlog
- This command is used to get the 802.11 statistics available in the
- station.
-
- Note: This command is available only when STA is connected.
-
-getadhocstatus
- This command is used to get the ad-hoc Network Status.
-
- The various status codes are:
- AdhocStarted
- AdhocJoined
- AdhocIdle
- InfraMode
- AutoUnknownMode
-
- Note: This command is available only when STA is connected.
-
-adhocgrate
- This command is used to enable(1) g_rate, Disable(0) g_rate
- and request(2) the status which g_rate is disabled/enabled,
- for Ad-hoc creator.
-
- where value is:-
- 0 -- Disabled
- 1 -- Enabled
- 2 -- Get
-
ledgpio
This command is used to set/get LEDs.
@@ -400,253 +131,6 @@
Note: LED0 is invalid
Note: Maximum Number of LEDs are 16.
-inactivityto
- This command is used by the host to set/get the inactivity timeout value,
- which specifies when WLAN device is put to sleep.
-
- Usage:
- iwpriv ethX inactivityto [<timeout>]
-
- where the parameter are:
- timeout: timeout value in milliseconds.
-
- Example:
- iwpriv eth1 inactivityto
- "get the timeout value"
-
- iwpriv eth1 inactivityto X
- "set timeout value to X ms"
-
-
-sleeppd
- This command is used to configure the sleep period of the WLAN device.
-
- Usage:
- iwpriv ethX sleeppd [<sleep period>]
-
- where the parameter are:
- Period: sleep period in milliseconds. Range 10~60.
-
- Example:
- iwpriv eth1 sleeppd 10
- "set period as 10 ms"
- iwpriv eth1 sleeppd
- "get the sleep period configuration"
-
-enable11d
- This command is used to control 11d
- where value is:-
- 1 -- Enabled
- 0 -- Disabled
- 2 -- Get
-
-
-
-
-tpccfg
- Enables or disables automatic transmit power control.
-
- The first parameter turns this feature on (1) or off (0). When turning
- on, the user must also supply four more parameters in the following
- order:
- -UseSNR (Use SNR (in addition to PER) for TPC algorithm),
- -P0 (P0 power level for TPC),
- -P1 (P1 power level for TPC),
- -P2 (P2 power level for TPC).
-
- Usage:
- iwpriv ethX tpccfg: Get current configuration
- iwpriv ethX tpccfg 0: disable auto TPC
- iwpriv ethX tpccfg 0x01 0x00 0x05 0x0a 0x0d: enable auto TPC; do not use SNR;
- P0=0x05; P1=0x0a; P2=0x0d;
- iwpriv ethX tpccfg 0x01 0x01 0x05 0x0a 0x0d: enable auto TPC; use SNR;
- P0=0x05; P1=0x0a; P2=0x0d.
-
-powercfg
- Enables or disables power adaptation.
-
- The first parameter turns this feature on (1) or off (0). When turning
- on, the user must also supply three more parameters in the following
- order:
- -P0 (P0 power level for Power Adaptation),
- -P1 (P1 power level for Power Adaptation),
- -P2 (P2 power level for Power Adaptation).
-
- Usage:
- iwpriv ethX powercfg: Get current configuration
- iwpriv ethX powercfg 0: disable power adaptation
- iwpriv ethX powercfg 1 0x0d 0x0f 0x12: enable power adaptation;
- P0=0x0d; P1=0x0f; P2=0x12.
-
-getafc
- This command returns automatic frequency control parameters. It returns
- three integers:
- -P0: automatic is on (1), or off (0),
- -P1: current timing offset in PPM (part per million), and
- -P2: current frequency offset in PPM.
-
-setafc
- Set automatic frequency control options.
-
- The first parameter turns automatic on (1) or off (0).
- The user must supply two more parameters in either case, in the following
- order:
-
- When auto is on:
-
- -P0 (automatic adjustment frequency threshold in PPM),
- -P1 (automatic adjustment period in beacon period),
-
- When auto is off:
-
- -P0 (manual adjustment timing offset in PPM), and
- -P1 (manual adjustment frequency offset in PPM).
-
- Usage:
- iwpriv ethX setafc 0 10 10: manual adjustment, both timing and frequcncy
- offset are 10 PPM.
-
- iwpriv ethX setafc 1 10 10 enable afc, automatic adjustment,
- frequency threshold 10 PPM, for every 10 beacon periods.
-
-
-
-scanprobes
- This command sets number of probe requests per channel.
-
- Usage:
- iwpriv ethX scanprobes 3 (set scan probes to 3)
- iwpriv ethX scanprobes (get scan probes)
-
-lolisteninter
- This command sets the value of listen interval.
-
- Usage:
- iwpriv ethX lolisteninter 234 (set the lolisteninter to 234)
- iwpriv ethX lolisteninter (get the lolisteninter value)
-
-rateadapt
- This command sets the data rates bitmap.
- Where <n>
- 0: Disable auto rate adapt
- 1: Enable auto rate adapt
-
- <m>
- data rate bitmap
- Bit Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 12-15 Reserved
-
- Usage:
- iwpriv ethX rateadapt
- read the currect data rate setting
- iwpriv ethX rateadapt 1 0x07
- enable auto data rate adapt and
- data rates are 1Mbps, 2Mbsp and 5.5Mbps
-
-
-txcontrol
- This command is used to set the Tx rate, ack policy, and retry limit on a per packet basis.
-
- Where value <n> is:
- if bit[4] == 1:
- bit[3:0] -- 0 1 2 3 4 5 6 7 8 9 10 11 12 13-16
- Data Rate(Mbps) -- 1 2 5.5 11 Rsv 6 9 12 18 24 36 48 54 Rsv
-
- bit[12:8]
- if bit[12] == 1, bit[11:8] specifies the Tx retry limit.
-
- bit[14:13] specifies per packet ack policy:
- bit[14:13]
- 1 0 use immediate ack policy for this packet
- 1 1 use no ack policy for this packet
- 0 x use the per-packet ack policy setting
-
- Usage:
- iwpriv ethX txcontrol 0x7513
- Use no-ack policy, 5 retires for Tx, 11Mbps rate
-
-
-
-psnullinterval
- This command is used to set/request NULL package interval for Power Save
- under infrastructure mode.
-
- where value is:-
- -1 -- Disabled
- n>0 -- Set interval as n (seconds)
-
-prescan
- This command is used to enable (1)/disable(0) auto prescan before assoicate to the ap
-
- where value is:-
- 0 -- Disabled
- 1 -- Enabled
- 2 -- Get
-
-getrxinfo
- This command gets non average value of Signal to Noise Ratio of Data and rate index.
-
- The following table shows RateIndex and Rate
-
- RateIndex Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 13-15 Reserved
-
-gettxrate
- This command gets current Tx rate index of the first packet associated with Rate Adaptation.
-
- The following table shows RateIndex and Rate
-
- RateIndex Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 13-15 Reserved
-
-bcninterval
- This command is used to sets beacon interval in adhoc mode when an argument is given, and gets current adhoc
- beacon interval when no argument is given. The valid beacon interval is between 20 - 1000,
- default beacon interval is 100.
-
- Usage:
- iwpriv ethX bcninterval 100 (set adhoc beacon interval to 100)
- iwpriv ethX bcninterval (get adhoc beacon interval)
-
fwt_add
This command is used to insert an entry into the FWT table. The list of
parameters must follow the following structure:
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index b55c7f5..c260bd1 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -23,13 +23,13 @@
ENTER();
lbs_pr_debug(1, "New SSID requested: %s\n", assoc_req->ssid.ssid);
- if (assoc_req->mode == wlan802_11infrastructure) {
+ if (assoc_req->mode == IW_MODE_INFRA) {
if (adapter->prescan) {
libertas_send_specific_SSID_scan(priv, &assoc_req->ssid, 1);
}
i = libertas_find_SSID_in_list(adapter, &assoc_req->ssid,
- NULL, wlan802_11infrastructure);
+ NULL, IW_MODE_INFRA);
if (i >= 0) {
lbs_pr_debug(1,
"SSID found in scan list ... associating...\n");
@@ -44,7 +44,7 @@
lbs_pr_debug(1, "SSID '%s' not found; cannot associate\n",
assoc_req->ssid.ssid);
}
- } else if (assoc_req->mode == wlan802_11ibss) {
+ } else if (assoc_req->mode == IW_MODE_ADHOC) {
/* Scan for the network, do not save previous results. Stale
* scan data will cause us to join a non-existant adhoc network
*/
@@ -52,7 +52,7 @@
/* Search for the requested SSID in the scan table */
i = libertas_find_SSID_in_list(adapter, &assoc_req->ssid, NULL,
- wlan802_11ibss);
+ IW_MODE_ADHOC);
if (i >= 0) {
lbs_pr_debug(1, "SSID found at %d in List, so join\n", ret);
libertas_join_adhoc_network(priv, &adapter->scantable[i]);
@@ -90,10 +90,10 @@
goto out;
}
- if (assoc_req->mode == wlan802_11infrastructure) {
+ if (assoc_req->mode == IW_MODE_INFRA) {
ret = wlan_associate(priv, &adapter->scantable[i]);
lbs_pr_debug(1, "ASSOC: return from wlan_associate(bssd) was %d\n", ret);
- } else if (assoc_req->mode == wlan802_11ibss) {
+ } else if (assoc_req->mode == IW_MODE_ADHOC) {
libertas_join_adhoc_network(priv, &adapter->scantable[i]);
}
memcpy(&assoc_req->ssid, &adapter->scantable[i].ssid,
@@ -142,23 +142,23 @@
ENTER();
- if (assoc_req->mode == adapter->inframode) {
+ if (assoc_req->mode == adapter->mode) {
LEAVE();
return 0;
}
- if (assoc_req->mode == wlan802_11infrastructure) {
+ if (assoc_req->mode == IW_MODE_INFRA) {
if (adapter->psstate != PS_STATE_FULL_POWER)
libertas_ps_wakeup(priv, cmd_option_waitforrsp);
adapter->psmode = wlan802_11powermodecam;
}
- adapter->inframode = assoc_req->mode;
+ adapter->mode = assoc_req->mode;
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_snmp_mib,
0, cmd_option_waitforrsp,
OID_802_11_INFRASTRUCTURE_MODE,
- (void *) assoc_req->mode);
+ (void *) (size_t) assoc_req->mode);
LEAVE();
return ret;
@@ -196,7 +196,7 @@
goto out;
/* enable/disable the MAC's WEP packet filter */
- if (assoc_req->secinfo.WEPstatus == wlan802_11WEPenabled)
+ if (assoc_req->secinfo.wep_enabled)
adapter->currentpacketfilter |= cmd_act_mac_wep_enable;
else
adapter->currentpacketfilter &= ~cmd_act_mac_wep_enable;
@@ -300,8 +300,7 @@
}
if (test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) {
- if (adapter->secinfo.authmode !=
- assoc_req->secinfo.authmode) {
+ if (adapter->secinfo.auth_mode != assoc_req->secinfo.auth_mode) {
lbs_pr_debug(1, "Deauthenticating due to updated security "
"info in configuration request.\n");
return 1;
@@ -316,7 +315,7 @@
/* FIXME: deal with 'auto' mode somehow */
if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
- if (assoc_req->mode != wlan802_11infrastructure)
+ if (assoc_req->mode != IW_MODE_INFRA)
return 1;
}
@@ -333,12 +332,12 @@
if (adapter->curbssparams.ssid.ssidlength != assoc_req->ssid.ssidlength)
return 1;
if (memcmp(adapter->curbssparams.ssid.ssid, assoc_req->ssid.ssid,
- sizeof(struct WLAN_802_11_SSID)))
+ adapter->curbssparams.ssid.ssidlength))
return 1;
/* FIXME: deal with 'auto' mode somehow */
if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
- if (assoc_req->mode != wlan802_11ibss)
+ if (assoc_req->mode != IW_MODE_ADHOC)
return 1;
}
@@ -382,7 +381,7 @@
}
if (find_any_ssid) {
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE new_mode;
+ u8 new_mode;
ret = libertas_find_best_network_SSID(priv, &assoc_req->ssid,
assoc_req->mode, &new_mode);
@@ -393,7 +392,7 @@
}
/* Ensure we switch to the mode of the AP */
- if (assoc_req->mode == wlan802_11autounknown) {
+ if (assoc_req->mode == IW_MODE_AUTO) {
set_bit(ASSOC_FLAG_MODE, &assoc_req->flags);
assoc_req->mode = new_mode;
}
@@ -403,7 +402,7 @@
* Check if the attributes being changing require deauthentication
* from the currently associated infrastructure access point.
*/
- if (adapter->inframode == wlan802_11infrastructure) {
+ if (adapter->mode == IW_MODE_INFRA) {
if (should_deauth_infrastructure(adapter, assoc_req)) {
ret = libertas_send_deauthentication(priv);
if (ret) {
@@ -412,7 +411,7 @@
ret);
}
}
- } else if (adapter->inframode == wlan802_11ibss) {
+ } else if (adapter->mode == IW_MODE_ADHOC) {
if (should_stop_adhoc(adapter, assoc_req)) {
ret = libertas_stop_adhoc_network(priv);
if (ret) {
@@ -543,7 +542,7 @@
assoc_req->channel = adapter->curbssparams.channel;
if (!test_bit(ASSOC_FLAG_MODE, &assoc_req->flags))
- assoc_req->mode = adapter->inframode;
+ assoc_req->mode = adapter->mode;
if (!test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
memcpy(&assoc_req->bssid, adapter->curbssparams.bssid,
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index bfdac58..de9cb46 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -381,15 +381,16 @@
switch (cmd_oid) {
case OID_802_11_INFRASTRUCTURE_MODE:
{
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode =
- (enum WLAN_802_11_NETWORK_INFRASTRUCTURE) pdata_buf;
+ u8 mode = (u8) (size_t) pdata_buf;
pSNMPMIB->querytype = cpu_to_le16(cmd_act_set);
pSNMPMIB->oid = cpu_to_le16((u16) desired_bsstype_i);
pSNMPMIB->bufsize = sizeof(u8);
- if (mode == wlan802_11infrastructure)
- ucTemp = SNMP_MIB_VALUE_INFRA;
- else
+ if (mode == IW_MODE_ADHOC) {
ucTemp = SNMP_MIB_VALUE_ADHOC;
+ } else {
+ /* Infra and Auto modes */
+ ucTemp = SNMP_MIB_VALUE_INFRA;
+ }
memmove(pSNMPMIB->value, &ucTemp, sizeof(u8));
@@ -947,8 +948,8 @@
spin_unlock_irqrestore(&adapter->driver_lock, flags);
- lbs_pr_debug(1, "QUEUE_CMD: Inserted node=0x%x, cmd=0x%x in cmdpendingq\n",
- (u32) cmdnode,
+ lbs_pr_debug(1, "QUEUE_CMD: Inserted node=%p, cmd=0x%x in cmdpendingq\n",
+ cmdnode,
((struct cmd_ds_gen*)cmdnode->bufvirtualaddr)->command);
done:
@@ -976,8 +977,8 @@
ENTER();
if (!adapter || !cmdnode) {
- lbs_pr_debug(1, "DNLD_CMD: adapter = %#x, cmdnode = %#x\n",
- (int)adapter, (int)cmdnode);
+ lbs_pr_debug(1, "DNLD_CMD: adapter = %p, cmdnode = %p\n",
+ adapter, cmdnode);
if (cmdnode) {
spin_lock_irqsave(&adapter->driver_lock, flags);
__libertas_cleanup_and_insert_cmd(priv, cmdnode);
@@ -1174,8 +1175,8 @@
cmdptr = (struct cmd_ds_command *)cmdnode->bufvirtualaddr;
- lbs_pr_debug(1, "PREP_CMD: Val of cmd ptr =0x%x, command=0x%X\n",
- (u32) cmdptr, cmd_no);
+ lbs_pr_debug(1, "PREP_CMD: Val of cmd ptr=%p, command=0x%X\n",
+ cmdptr, cmd_no);
if (!cmdptr) {
lbs_pr_debug(1, "PREP_CMD: bufvirtualaddr of cmdnode is NULL\n");
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index cdb012c..c864540 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -72,8 +72,6 @@
adapter->secinfo.WPAenabled = 0;
adapter->secinfo.WPA2enabled = 0;
adapter->wpa_ie_len = 0;
- adapter->secinfo.auth1xalg = WLAN_1X_AUTH_ALG_NONE;
- adapter->secinfo.Encryptionmode = CIPHER_NONE;
adapter->connect_status = libertas_disconnected;
@@ -811,7 +809,7 @@
if (result) {
lbs_pr_debug(1, "CMD_RESP: PS command failed- %#x \n",
resp->result);
- if (adapter->inframode == wlan802_11ibss) {
+ if (adapter->mode == IW_MODE_ADHOC) {
/*
* We should not re-try enter-ps command in
* ad-hoc mode. It takes place in
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 51dfd20..7d7bc5e 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -7,6 +7,7 @@
#include "dev.h"
#include "decl.h"
#include "host.h"
+#include "debugfs.h"
static struct dentry *libertas_dir = NULL;
static char *szStates[] = {
@@ -276,7 +277,7 @@
if (!end)
end = buf + count - 1;
- size = min(IW_ESSID_MAX_SIZE, end - hold);
+ size = min((size_t)IW_ESSID_MAX_SIZE, (size_t) (end - hold));
strncpy(scan_cfg->specificSSID, hold, size);
return;
@@ -1648,7 +1649,7 @@
struct file_operations fops;
};
-struct libertas_debugfs_files debugfs_files[] = {
+static struct libertas_debugfs_files debugfs_files[] = {
{ "info", 0444, FOPS(libertas_dev_info, write_file_dummy), },
{ "getscantable", 0444, FOPS(libertas_getscantable,
write_file_dummy), },
@@ -1658,7 +1659,7 @@
{ "setuserscan", 0600, FOPS(NULL, libertas_setuserscan), },
};
-struct libertas_debugfs_files debugfs_events_files[] = {
+static struct libertas_debugfs_files debugfs_events_files[] = {
{"low_rssi", 0644, FOPS(libertas_lowrssi_read,
libertas_lowrssi_write), },
{"low_snr", 0644, FOPS(libertas_lowsnr_read,
@@ -1673,7 +1674,7 @@
libertas_highsnr_write), },
};
-struct libertas_debugfs_files debugfs_regs_files[] = {
+static struct libertas_debugfs_files debugfs_regs_files[] = {
{"rdmac", 0644, FOPS(libertas_rdmac_read, libertas_rdmac_write), },
{"wrmac", 0600, FOPS(NULL, libertas_wrmac_write), },
{"rdbbp", 0644, FOPS(libertas_rdbbp_read, libertas_rdbbp_write), },
@@ -1778,7 +1779,7 @@
struct debug_data {
char name[32];
u32 size;
- u32 addr;
+ size_t addr;
};
/* To debug any member of wlan_adapter, simply add one line here.
@@ -1825,6 +1826,8 @@
val = *((u16 *) d[i].addr);
else if (d[i].size == 4)
val = *((u32 *) d[i].addr);
+ else if (d[i].size == 8)
+ val = *((u64 *) d[i].addr);
pos += sprintf(p + pos, "%s=%d\n", d[i].name, val);
}
@@ -1844,7 +1847,7 @@
* @param data data to write
* @return number of data
*/
-static int wlan_debugfs_write(struct file *f, const char __user *buf,
+static ssize_t wlan_debugfs_write(struct file *f, const char __user *buf,
size_t cnt, loff_t *ppos)
{
int r, i;
@@ -1886,12 +1889,14 @@
*((u16 *) d[i].addr) = (u16) r;
else if (d[i].size == 4)
*((u32 *) d[i].addr) = (u32) r;
+ else if (d[i].size == 8)
+ *((u64 *) d[i].addr) = (u64) r;
break;
} while (1);
}
kfree(pdata);
- return cnt;
+ return (ssize_t)cnt;
}
static struct file_operations libertas_debug_fops = {
@@ -1916,20 +1921,10 @@
return;
for (i = 0; i < num_of_items; i++)
- items[i].addr += (u32) priv->adapter;
+ items[i].addr += (size_t) priv->adapter;
priv->debugfs_debug = debugfs_create_file("debug", 0644,
priv->debugfs_dir, &items[0],
&libertas_debug_fops);
}
-/**
- * @brief remove proc file
- *
- * @param priv pointer wlan_private
- * @return N/A
- */
-void libertas_debug_remove(wlan_private * priv)
-{
- debugfs_remove(priv->debugfs_debug);
-}
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index fb1478c..80dd9ea 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -9,6 +9,11 @@
extern unsigned int libertas_debug;
+#ifdef CONFIG_LIBERTAS_DEBUG
+#define DEBUG
+#define PROC_DEBUG
+#endif
+
#define DRV_NAME "usb8xxx"
#define lbs_pr_info(format, args...) \
@@ -223,31 +228,6 @@
MAX_TYPE_AVG
};
-/** WLAN_802_11_AUTH_ALG*/
-enum WLAN_802_11_AUTH_ALG {
- AUTH_ALG_OPEN_SYSTEM = 1,
- AUTH_ALG_SHARED_KEY = 2,
- AUTH_ALG_NETWORK_EAP = 8,
-};
-
-/** WLAN_802_1X_AUTH_ALG */
-enum WLAN_802_1X_AUTH_ALG {
- WLAN_1X_AUTH_ALG_NONE = 1,
- WLAN_1X_AUTH_ALG_LEAP = 2,
- WLAN_1X_AUTH_ALG_TLS = 4,
- WLAN_1X_AUTH_ALG_TTLS = 8,
- WLAN_1X_AUTH_ALG_MD5 = 16,
-};
-
-/** WLAN_802_11_ENCRYPTION_MODE */
-enum WLAN_802_11_ENCRYPTION_MODE {
- CIPHER_NONE,
- CIPHER_WEP40,
- CIPHER_TKIP,
- CIPHER_CCMP,
- CIPHER_WEP104,
-};
-
/** WLAN_802_11_POWER_MODE */
enum WLAN_802_11_POWER_MODE {
wlan802_11powermodecam,
@@ -292,28 +272,6 @@
MVMS_EVENT
};
-/** WLAN_802_11_NETWORK_INFRASTRUCTURE */
-enum WLAN_802_11_NETWORK_INFRASTRUCTURE {
- wlan802_11ibss,
- wlan802_11infrastructure,
- wlan802_11autounknown,
- /*defined as upper bound */
- wlan802_11infrastructuremax
-};
-
-/** WLAN_802_11_AUTHENTICATION_MODE */
-enum WLAN_802_11_AUTHENTICATION_MODE {
- wlan802_11authmodeopen = 0x00,
- wlan802_11authmodeshared = 0x01,
- wlan802_11authmodenetworkEAP = 0x80,
-};
-
-/** WLAN_802_11_WEP_STATUS */
-enum WLAN_802_11_WEP_STATUS {
- wlan802_11WEPenabled,
- wlan802_11WEPdisabled,
-};
-
/** SNMP_MIB_INDEX_e */
enum SNMP_MIB_INDEX_e {
desired_bsstype_i = 0,
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index b1f876f..e8b9020 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -10,6 +10,7 @@
#include <linux/wireless.h>
#include <linux/ethtool.h>
#include <linux/debugfs.h>
+#include <net/ieee80211.h>
#include "defs.h"
#include "scan.h"
@@ -56,10 +57,8 @@
struct wlan_802_11_security {
u8 WPAenabled;
u8 WPA2enabled;
- enum WLAN_802_11_WEP_STATUS WEPstatus;
- enum WLAN_802_11_AUTHENTICATION_MODE authmode;
- enum WLAN_802_1X_AUTH_ALG auth1xalg;
- enum WLAN_802_11_ENCRYPTION_MODE Encryptionmode;
+ u8 wep_enabled;
+ u8 auth_mode;
};
/** Current Basic Service Set State Structure */
@@ -184,7 +183,7 @@
struct WLAN_802_11_SSID ssid;
u8 channel;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode;
+ u8 mode;
u8 bssid[ETH_ALEN];
/** WEP keys */
@@ -198,7 +197,6 @@
struct wlan_802_11_security secinfo;
/** WPA Information Elements*/
-#define MAX_WPA_IE_LEN 64
u8 wpa_ie[MAX_WPA_IE_LEN];
u8 wpa_ie_len;
};
@@ -254,7 +252,8 @@
/** current ssid/bssid related parameters*/
struct current_bss_params curbssparams;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE inframode;
+ /* IW_MODE_* */
+ u8 mode;
struct bss_descriptor *pattemptedbssdesc;
@@ -339,7 +338,6 @@
struct WLAN_802_11_KEY wpa_unicast_key;
/** WPA Information Elements*/
-#define MAX_WPA_IE_LEN 64
u8 wpa_ie[MAX_WPA_IE_LEN];
u8 wpa_ie_len;
diff --git a/drivers/net/wireless/libertas/fw.c b/drivers/net/wireless/libertas/fw.c
index b194a45..441123c 100644
--- a/drivers/net/wireless/libertas/fw.c
+++ b/drivers/net/wireless/libertas/fw.c
@@ -194,16 +194,13 @@
adapter->scanmode = cmd_bss_type_any;
/* 802.11 specific */
- adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ adapter->secinfo.wep_enabled = 0;
for (i = 0; i < sizeof(adapter->wep_keys) / sizeof(adapter->wep_keys[0]);
i++)
memset(&adapter->wep_keys[i], 0, sizeof(struct WLAN_802_11_KEY));
adapter->wep_tx_keyidx = 0;
- adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
- adapter->secinfo.authmode = wlan802_11authmodeopen;
- adapter->secinfo.auth1xalg = WLAN_1X_AUTH_ALG_NONE;
- adapter->secinfo.Encryptionmode = CIPHER_NONE;
- adapter->inframode = wlan802_11infrastructure;
+ adapter->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
+ adapter->mode = IW_MODE_INFRA;
adapter->assoc_req = NULL;
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 695fb6a..ae6f72a 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -388,7 +388,7 @@
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev,
cardp->bulk_in_endpointAddr),
- skb->tail + IPFIELD_ALIGN_OFFSET,
+ (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
rinfo);
@@ -626,6 +626,7 @@
cardp->usb_event_cause);
if (cardp->usb_event_cause & 0xffff0000) {
libertas_send_tx_feedback(priv);
+ spin_unlock(&priv->adapter->driver_lock);
break;
}
cardp->usb_event_cause = le32_to_cpu(cardp->usb_event_cause) << 3;
@@ -775,7 +776,6 @@
return -1;
}
-#ifdef SUPPORT_BOOT_COMMAND
cardp->bootcmdresp = 0;
do {
int j = 0;
@@ -796,7 +796,6 @@
}
return -1;
}
-#endif
i = 0;
priv->adapter->fw_ready = 0;
diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h
index 7851167..170dfe6 100644
--- a/drivers/net/wireless/libertas/if_usb.h
+++ b/drivers/net/wireless/libertas/if_usb.h
@@ -12,7 +12,6 @@
#define USB8388_VID_2 0x05a3
#define USB8388_PID_2 0x8388
-#ifdef SUPPORT_BOOT_COMMAND
#define BOOT_CMD_FW_BY_USB 0x01
#define BOOT_CMD_FW_IN_EEPROM 0x02
#define BOOT_CMD_UPDATE_BOOT2 0x03
@@ -36,7 +35,6 @@
u8 u8result;
u8 au8dumy[2];
};
-#endif /* SUPPORT_BOOT_COMMAND */
/* read callback private data */
struct read_cb_info {
diff --git a/drivers/net/wireless/libertas/ioctl.c b/drivers/net/wireless/libertas/ioctl.c
index 82b3964..a8f76c3 100644
--- a/drivers/net/wireless/libertas/ioctl.c
+++ b/drivers/net/wireless/libertas/ioctl.c
@@ -27,95 +27,6 @@
#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ)
-static int setrxantenna(wlan_private * priv, int mode)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if (mode != RF_ANTENNA_1 && mode != RF_ANTENNA_2
- && mode != RF_ANTENNA_AUTO) {
- return -EINVAL;
- }
-
- adapter->rxantennamode = mode;
-
- lbs_pr_debug(1, "SET RX Antenna mode to 0x%04x\n", adapter->rxantennamode);
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_set_rx,
- cmd_option_waitforrsp, 0,
- &adapter->rxantennamode);
- return ret;
-}
-
-static int settxantenna(wlan_private * priv, int mode)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if ((mode != RF_ANTENNA_1) && (mode != RF_ANTENNA_2)
- && (mode != RF_ANTENNA_AUTO)) {
- return -EINVAL;
- }
-
- adapter->txantennamode = mode;
-
- lbs_pr_debug(1, "SET TX Antenna mode to 0x%04x\n", adapter->txantennamode);
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_set_tx,
- cmd_option_waitforrsp, 0,
- &adapter->txantennamode);
-
- return ret;
-}
-
-static int getrxantenna(wlan_private * priv, char *buf)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- // clear it, so we will know if the value
- // returned below is correct or not.
- adapter->rxantennamode = 0;
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_get_rx,
- cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
-
- lbs_pr_debug(1, "Get Rx Antenna mode:0x%04x\n", adapter->rxantennamode);
-
- return sprintf(buf, "0x%04x", adapter->rxantennamode) + 1;
-}
-
-static int gettxantenna(wlan_private * priv, char *buf)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- // clear it, so we will know if the value
- // returned below is correct or not.
- adapter->txantennamode = 0;
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_get_tx,
- cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
-
- lbs_pr_debug(1, "Get Tx Antenna mode:0x%04x\n", adapter->txantennamode);
-
- return sprintf(buf, "0x%04x", adapter->txantennamode) + 1;
-}
-
static int wlan_set_region(wlan_private * priv, u16 region_code)
{
int i;
@@ -144,998 +55,6 @@
return 0;
}
-/**
- * @brief Get/Set Firmware wakeup method
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_txcontrol(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data;
- ENTER();
-
- if ((int)wrq->u.data.length == 0) {
- if (copy_to_user
- (wrq->u.data.pointer, &adapter->pkttxctrl, sizeof(u32))) {
- lbs_pr_alert("copy_to_user failed!\n");
- return -EFAULT;
- }
- } else {
- if ((int)wrq->u.data.length > 1) {
- lbs_pr_alert("ioctl too many args!\n");
- return -EFAULT;
- }
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_alert("Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->pkttxctrl = (u32) data;
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return 0;
-}
-
-/**
- * @brief Get/Set NULL Package generation interval
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_null_pkt_interval(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data;
- ENTER();
-
- if ((int)wrq->u.data.length == 0) {
- data = adapter->nullpktinterval;
-
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) {
- lbs_pr_alert( "copy_to_user failed!\n");
- return -EFAULT;
- }
- } else {
- if ((int)wrq->u.data.length > 1) {
- lbs_pr_alert( "ioctl too many args!\n");
- return -EFAULT;
- }
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->nullpktinterval = data;
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_get_rxinfo(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data[2];
- ENTER();
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- data[1] = adapter->rxpd_rate;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- wrq->u.data.length = 2;
- LEAVE();
- return 0;
-}
-
-static int wlan_get_snr(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int data[4];
-
- ENTER();
- memset(data, 0, sizeof(data));
- if (wrq->u.data.length) {
- if (copy_from_user(data, wrq->u.data.pointer,
- min_t(size_t, wrq->u.data.length, 4) * sizeof(int)))
- return -EFAULT;
- }
- if ((wrq->u.data.length == 0) || (data[0] == 0) || (data[0] == 1)) {
- if (adapter->connect_status == libertas_connected) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0,
- cmd_option_waitforrsp,
- 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
- }
- }
-
- if (wrq->u.data.length == 0) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG];
- data[1] = adapter->SNR[TYPE_BEACON][TYPE_AVG];
- data[2] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- data[3] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 4))
- return -EFAULT;
- wrq->u.data.length = 4;
- } else if (data[0] == 0) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 1) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_AVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 2) {
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 3) {
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else
- return -ENOTSUPP;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_beacon_interval(wlan_private * priv, struct iwreq *wrq)
-{
- int data;
- wlan_adapter *adapter = priv->adapter;
-
- if (wrq->u.data.length > 0) {
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int)))
- return -EFAULT;
-
- lbs_pr_debug(1, "WLAN SET BEACON INTERVAL: %d\n", data);
- if ((data > MRVDRV_MAX_BEACON_INTERVAL)
- || (data < MRVDRV_MIN_BEACON_INTERVAL))
- return -ENOTSUPP;
- adapter->beaconperiod = data;
- }
- data = adapter->beaconperiod;
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int)))
- return -EFAULT;
-
- wrq->u.data.length = 1;
-
- return 0;
-}
-
-static int wlan_get_rssi(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int temp;
- int data = 0;
- int *val;
-
- ENTER();
- data = SUBCMD_DATA(wrq);
- if ((data == 0) || (data == 1)) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0, cmd_option_waitforrsp,
- 0, NULL);
- if (ret) {
- LEAVE();
- return ret;
- }
- }
-
- switch (data) {
- case 0:
-
- temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_NOAVG],
- adapter->NF[TYPE_BEACON][TYPE_NOAVG]);
- break;
- case 1:
- temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_AVG],
- adapter->NF[TYPE_BEACON][TYPE_AVG]);
- break;
- case 2:
- temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_NOAVG],
- adapter->NF[TYPE_RXPD][TYPE_NOAVG]);
- break;
- case 3:
- temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE,
- adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE);
- break;
- default:
- return -ENOTSUPP;
- }
- val = (int *)wrq->u.name;
- *val = temp;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_get_nf(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int temp;
- int data = 0;
- int *val;
-
- data = SUBCMD_DATA(wrq);
- if ((data == 0) || (data == 1)) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0, cmd_option_waitforrsp,
- 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
- }
-
- switch (data) {
- case 0:
- temp = adapter->NF[TYPE_BEACON][TYPE_NOAVG];
- break;
- case 1:
- temp = adapter->NF[TYPE_BEACON][TYPE_AVG];
- break;
- case 2:
- temp = adapter->NF[TYPE_RXPD][TYPE_NOAVG];
- break;
- case 3:
- temp = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- break;
- default:
- return -ENOTSUPP;
- }
-
- temp = CAL_NF(temp);
-
- lbs_pr_debug(1, "%s: temp = %d\n", __FUNCTION__, temp);
- val = (int *)wrq->u.name;
- *val = temp;
- return 0;
-}
-
-static int wlan_get_txrate_ioctl(wlan_private * priv, struct ifreq *req)
-{
- wlan_adapter *adapter = priv->adapter;
- int *pdata;
- struct iwreq *wrq = (struct iwreq *)req;
- int ret = 0;
- adapter->txrate = 0;
- lbs_pr_debug(1, "wlan_get_txrate_ioctl\n");
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_tx_rate_query,
- cmd_act_get, cmd_option_waitforrsp,
- 0, NULL);
- if (ret)
- return ret;
-
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->txrate;
- return 0;
-}
-
-static int wlan_get_adhoc_status_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- char status[64];
- wlan_adapter *adapter = priv->adapter;
-
- memset(status, 0, sizeof(status));
-
- switch (adapter->inframode) {
- case wlan802_11ibss:
- if (adapter->connect_status == libertas_connected) {
- if (adapter->adhoccreate)
- memcpy(&status, "AdhocStarted", sizeof(status));
- else
- memcpy(&status, "AdhocJoined", sizeof(status));
- } else {
- memcpy(&status, "AdhocIdle", sizeof(status));
- }
- break;
- case wlan802_11infrastructure:
- memcpy(&status, "Inframode", sizeof(status));
- break;
- default:
- memcpy(&status, "AutoUnknownmode", sizeof(status));
- break;
- }
-
- lbs_pr_debug(1, "status = %s\n", status);
- wrq->u.data.length = strlen(status) + 1;
-
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer,
- &status, wrq->u.data.length))
- return -EFAULT;
- }
-
- LEAVE();
- return 0;
-}
-
-/**
- * @brief Set/Get WPA IE
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_setwpaie_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- ENTER();
-
- if (wrq->u.data.length) {
- if (wrq->u.data.length > sizeof(adapter->wpa_ie)) {
- lbs_pr_debug(1, "failed to copy WPA IE, too big \n");
- return -EFAULT;
- }
- if (copy_from_user(adapter->wpa_ie, wrq->u.data.pointer,
- wrq->u.data.length)) {
- lbs_pr_debug(1, "failed to copy WPA IE \n");
- return -EFAULT;
- }
- adapter->wpa_ie_len = wrq->u.data.length;
- lbs_pr_debug(1, "Set wpa_ie_len=%d IE=%#x\n", adapter->wpa_ie_len,
- adapter->wpa_ie[0]);
- lbs_dbg_hex("wpa_ie", adapter->wpa_ie, adapter->wpa_ie_len);
- if (adapter->wpa_ie[0] == WPA_IE)
- adapter->secinfo.WPAenabled = 1;
- else if (adapter->wpa_ie[0] == WPA2_IE)
- adapter->secinfo.WPA2enabled = 1;
- else {
- adapter->secinfo.WPAenabled = 0;
- adapter->secinfo.WPA2enabled = 0;
- }
- } else {
- memset(adapter->wpa_ie, 0, sizeof(adapter->wpa_ie));
- adapter->wpa_ie_len = wrq->u.data.length;
- lbs_pr_debug(1, "Reset wpa_ie_len=%d IE=%#x\n",
- adapter->wpa_ie_len, adapter->wpa_ie[0]);
- adapter->secinfo.WPAenabled = 0;
- adapter->secinfo.WPA2enabled = 0;
- }
-
- // enable/disable RSN in firmware if WPA is enabled/disabled
- // depending on variable adapter->secinfo.WPAenabled is set or not
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_enable_rsn,
- cmd_act_set, cmd_option_waitforrsp,
- 0, NULL);
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set Auto prescan
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_subcmd_setprescan_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- int data;
- wlan_adapter *adapter = priv->adapter;
- int *val;
-
- data = SUBCMD_DATA(wrq);
- lbs_pr_debug(1, "WLAN_SUBCMD_SET_PRESCAN %d\n", data);
- adapter->prescan = data;
-
- val = (int *)wrq->u.name;
- *val = data;
- return 0;
-}
-
-static int wlan_set_multiple_dtim_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- u32 mdtim;
- int idata;
- int ret = -EINVAL;
-
- ENTER();
-
- idata = SUBCMD_DATA(wrq);
- mdtim = (u32) idata;
- if (((mdtim >= MRVDRV_MIN_MULTIPLE_DTIM)
- && (mdtim <= MRVDRV_MAX_MULTIPLE_DTIM))
- || (mdtim == MRVDRV_IGNORE_MULTIPLE_DTIM)) {
- priv->adapter->multipledtim = mdtim;
- ret = 0;
- }
- if (ret)
- lbs_pr_debug(1, "Invalid parameter, multipledtim not changed.\n");
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set authentication mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_setauthalg_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int alg;
- struct iwreq *wrq = (struct iwreq *)req;
- wlan_adapter *adapter = priv->adapter;
-
- if (wrq->u.data.flags == 0) {
- //from iwpriv subcmd
- alg = SUBCMD_DATA(wrq);
- } else {
- //from wpa_supplicant subcmd
- if (copy_from_user(&alg, wrq->u.data.pointer, sizeof(alg))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- }
-
- lbs_pr_debug(1, "auth alg is %#x\n", alg);
-
- switch (alg) {
- case AUTH_ALG_SHARED_KEY:
- adapter->secinfo.authmode = wlan802_11authmodeshared;
- break;
- case AUTH_ALG_NETWORK_EAP:
- adapter->secinfo.authmode =
- wlan802_11authmodenetworkEAP;
- break;
- case AUTH_ALG_OPEN_SYSTEM:
- default:
- adapter->secinfo.authmode = wlan802_11authmodeopen;
- break;
- }
- return 0;
-}
-
-/**
- * @brief Set 802.1x authentication mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set8021xauthalg_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int alg;
- struct iwreq *wrq = (struct iwreq *)req;
-
- if (wrq->u.data.flags == 0) {
- //from iwpriv subcmd
- alg = SUBCMD_DATA(wrq);
- } else {
- //from wpa_supplicant subcmd
- if (copy_from_user(&alg, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- }
- lbs_pr_debug(1, "802.1x auth alg is %#x\n", alg);
- priv->adapter->secinfo.auth1xalg = alg;
- return 0;
-}
-
-static int wlan_setencryptionmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
- struct iwreq *wrq = (struct iwreq *)req;
-
- ENTER();
-
- if (wrq->u.data.flags == 0) {
- //from iwpriv subcmd
- mode = SUBCMD_DATA(wrq);
- } else {
- //from wpa_supplicant subcmd
- if (copy_from_user(&mode, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- }
- lbs_pr_debug(1, "encryption mode is %#x\n", mode);
- priv->adapter->secinfo.Encryptionmode = mode;
-
- LEAVE();
- return 0;
-}
-
-static void adjust_mtu(wlan_private * priv)
-{
- int mtu_increment = 0;
-
- if (priv->adapter->linkmode == WLAN_LINKMODE_802_11)
- mtu_increment += sizeof(struct ieee80211_hdr_4addr);
-
- if (priv->adapter->radiomode == WLAN_RADIOMODE_RADIOTAP)
- mtu_increment += max(sizeof(struct tx_radiotap_hdr),
- sizeof(struct rx_radiotap_hdr));
- priv->wlan_dev.netdev->mtu = ETH_FRAME_LEN
- - sizeof(struct ethhdr)
- + mtu_increment;
-}
-
-/**
- * @brief Set Link-Layer Layer mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_linkmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
-
- mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data;
-
- switch (mode) {
- case WLAN_LINKMODE_802_3:
- priv->adapter->linkmode = mode;
- break;
- case WLAN_LINKMODE_802_11:
- priv->adapter->linkmode = mode;
- break;
- default:
- lbs_pr_info("usb8388-5: invalid link-layer mode (%#x)\n",
- mode);
- return -EINVAL;
- break;
- }
- lbs_pr_debug(1, "usb8388-5: link-layer mode is %#x\n", mode);
-
- adjust_mtu(priv);
-
- return 0;
-}
-
-/**
- * @brief Set Radio header mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_radiomode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
-
- mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data;
-
- switch (mode) {
- case WLAN_RADIOMODE_NONE:
- priv->adapter->radiomode = mode;
- break;
- case WLAN_RADIOMODE_RADIOTAP:
- priv->adapter->radiomode = mode;
- break;
- default:
- lbs_pr_debug(1, "usb8388-5: invalid radio header mode (%#x)\n",
- mode);
- return -EINVAL;
- }
- lbs_pr_debug(1, "usb8388-5: radio-header mode is %#x\n", mode);
-
- adjust_mtu(priv);
- return 0;
-}
-
-/**
- * @brief Set Debug header mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_debugmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- priv->adapter->debugmode = (int)((struct ifreq *)
- ((u8 *) req + 4))->ifr_data;
- return 0;
-}
-
-static int wlan_subcmd_getrxantenna_ioctl(wlan_private * priv,
- struct ifreq *req)
-{
- int len;
- char buf[8];
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_pr_debug(1, "WLAN_SUBCMD_GETRXANTENNA\n");
- len = getrxantenna(priv, buf);
-
- wrq->u.data.length = len;
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer, &buf, len)) {
- lbs_pr_debug(1, "CopyToUser failed\n");
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int wlan_subcmd_gettxantenna_ioctl(wlan_private * priv,
- struct ifreq *req)
-{
- int len;
- char buf[8];
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_pr_debug(1, "WLAN_SUBCMD_GETTXANTENNA\n");
- len = gettxantenna(priv, buf);
-
- wrq->u.data.length = len;
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer, &buf, len)) {
- lbs_pr_debug(1, "CopyToUser failed\n");
- return -EFAULT;
- }
- }
- return 0;
-}
-
-/**
- * @brief Get the MAC TSF value from the firmware
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure containing buffer
- * space to store a TSF value retrieved from the firmware
- *
- * @return 0 if successful; IOCTL error code otherwise
- */
-static int wlan_get_tsf_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- u64 tsfval;
- int ret;
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_get_tsf,
- 0, cmd_option_waitforrsp, 0, &tsfval);
-
- lbs_pr_debug(1, "IOCTL: Get TSF = 0x%016llx\n", tsfval);
-
- if (ret != 0) {
- lbs_pr_debug(1, "IOCTL: Get TSF; command exec failed\n");
- ret = -EFAULT;
- } else {
- if (copy_to_user(wrq->u.data.pointer,
- &tsfval,
- min_t(size_t, wrq->u.data.length,
- sizeof(tsfval))) != 0) {
-
- lbs_pr_debug(1, "IOCTL: Get TSF; Copy to user failed\n");
- ret = -EFAULT;
- } else {
- ret = 0;
- }
- }
- return ret;
-}
-
-/**
- * @brief Get/Set adapt rate
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_adapt_rateset(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- wlan_adapter *adapter = priv->adapter;
- int data[2];
-
- memset(data, 0, sizeof(data));
- if (!wrq->u.data.length) {
- lbs_pr_debug(1, "Get ADAPT RATE SET\n");
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rate_adapt_rateset,
- cmd_act_get,
- cmd_option_waitforrsp, 0, NULL);
- data[0] = adapter->enablehwauto;
- data[1] = adapter->ratebitmap;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-#define GET_TWO_INT 2
- wrq->u.data.length = GET_TWO_INT;
- } else {
- lbs_pr_debug(1, "Set ADAPT RATE SET\n");
- if (wrq->u.data.length > 2)
- return -EINVAL;
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->enablehwauto = data[0];
- adapter->ratebitmap = data[1];
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rate_adapt_rateset,
- cmd_act_set,
- cmd_option_waitforrsp, 0, NULL);
- }
- return ret;
-}
-
-/**
- * @brief Get/Set inactivity timeout
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_inactivity_timeout(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- int data = 0;
- u16 timeout = 0;
-
- ENTER();
- if (wrq->u.data.length > 1)
- return -ENOTSUPP;
-
- if (wrq->u.data.length == 0) {
- /* Get */
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_inactivity_timeout,
- cmd_act_get,
- cmd_option_waitforrsp, 0,
- &timeout);
- data = timeout;
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- } else {
- /* Set */
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- timeout = data;
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_inactivity_timeout,
- cmd_act_set,
- cmd_option_waitforrsp, 0,
- &timeout);
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return ret;
-}
-
-static int wlan_do_getlog_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- char buf[GETLOG_BUFSIZE - 1];
- wlan_adapter *adapter = priv->adapter;
-
- lbs_pr_debug(1, " GET STATS\n");
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_get_log,
- 0, cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- return ret;
- }
-
- if (wrq->u.data.pointer) {
- sprintf(buf, "\n mcasttxframe %u failed %u retry %u "
- "multiretry %u framedup %u "
- "rtssuccess %u rtsfailure %u ackfailure %u\n"
- "rxfrag %u mcastrxframe %u fcserror %u "
- "txframe %u wepundecryptable %u ",
- adapter->logmsg.mcasttxframe,
- adapter->logmsg.failed,
- adapter->logmsg.retry,
- adapter->logmsg.multiretry,
- adapter->logmsg.framedup,
- adapter->logmsg.rtssuccess,
- adapter->logmsg.rtsfailure,
- adapter->logmsg.ackfailure,
- adapter->logmsg.rxfrag,
- adapter->logmsg.mcastrxframe,
- adapter->logmsg.fcserror,
- adapter->logmsg.txframe,
- adapter->logmsg.wepundecryptable);
- wrq->u.data.length = strlen(buf) + 1;
- if (copy_to_user(wrq->u.data.pointer, buf, wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int wlan_scan_type_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- u8 buf[12];
- u8 *option[] = { "active", "passive", "get", };
- int i, max_options = (sizeof(option) / sizeof(option[0]));
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if (priv->adapter->enable11d) {
- lbs_pr_debug(1, "11D: Cannot set scantype when 11D enabled\n");
- return -EFAULT;
- }
-
- memset(buf, 0, sizeof(buf));
-
- if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf),
- wrq->u.data.length)))
- return -EFAULT;
-
- lbs_pr_debug(1, "Scan type Option = %s\n", buf);
-
- buf[sizeof(buf) - 1] = '\0';
-
- for (i = 0; i < max_options; i++) {
- if (!strcmp(buf, option[i]))
- break;
- }
-
- switch (i) {
- case 0:
- adapter->scantype = cmd_scan_type_active;
- break;
- case 1:
- adapter->scantype = cmd_scan_type_passive;
- break;
- case 2:
- wrq->u.data.length = strlen(option[adapter->scantype]) + 1;
-
- if (copy_to_user(wrq->u.data.pointer,
- option[adapter->scantype],
- wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- ret = -EFAULT;
- }
-
- break;
- default:
- lbs_pr_debug(1, "Invalid Scan type Ioctl Option\n");
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
-static int wlan_scan_mode_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- u8 buf[12];
- u8 *option[] = { "bss", "ibss", "any", "get" };
- int i, max_options = (sizeof(option) / sizeof(option[0]));
- int ret = 0;
-
- ENTER();
-
- memset(buf, 0, sizeof(buf));
-
- if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf),
- wrq->u.data.length))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- lbs_pr_debug(1, "Scan mode Option = %s\n", buf);
-
- buf[sizeof(buf) - 1] = '\0';
-
- for (i = 0; i < max_options; i++) {
- if (!strcmp(buf, option[i]))
- break;
- }
-
- switch (i) {
-
- case 0:
- adapter->scanmode = cmd_bss_type_bss;
- break;
- case 1:
- adapter->scanmode = cmd_bss_type_ibss;
- break;
- case 2:
- adapter->scanmode = cmd_bss_type_any;
- break;
- case 3:
-
- wrq->u.data.length = strlen(option[adapter->scanmode - 1]) + 1;
-
- lbs_pr_debug(1, "Get Scan mode Option = %s\n",
- option[adapter->scanmode - 1]);
-
- lbs_pr_debug(1, "Scan mode length %d\n", wrq->u.data.length);
-
- if (copy_to_user(wrq->u.data.pointer,
- option[adapter->scanmode - 1],
- wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- ret = -EFAULT;
- }
- lbs_pr_debug(1, "GET Scan type Option after copy = %s\n",
- (char *)wrq->u.data.pointer);
-
- break;
-
- default:
- lbs_pr_debug(1, "Invalid Scan mode Ioctl Option\n");
- ret = -EINVAL;
- break;
- }
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Get/Set Adhoc G Rate
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_do_set_grate_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data, data1;
- int *val;
-
- ENTER();
-
- data1 = SUBCMD_DATA(wrq);
- switch (data1) {
- case 0:
- adapter->adhoc_grate_enabled = 0;
- break;
- case 1:
- adapter->adhoc_grate_enabled = 1;
- break;
- case 2:
- break;
- default:
- return -EINVAL;
- }
- data = adapter->adhoc_grate_enabled;
- val = (int *)wrq->u.name;
- *val = data;
- LEAVE();
- return 0;
-}
-
static inline int hex2int(char c)
{
if (c >= '0' && c <= '9')
@@ -1761,6 +680,7 @@
*/
static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
{
+ struct iwreq *wrq = (struct iwreq *)req;
static struct cmd_ds_fwt_access fwt_access;
int ret;
@@ -1776,7 +696,7 @@
(void *)&fwt_access);
if (ret == 0)
- req->ifr_data = (char *)(le32_to_cpu(fwt_access.references));
+ wrq->u.param.value = le32_to_cpu(fwt_access.references);
else
return -EFAULT;
@@ -1792,6 +712,7 @@
*/
static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
{
+ struct iwreq *wrq = (struct iwreq *)req;
static struct cmd_ds_fwt_access fwt_access;
int ret;
@@ -1807,7 +728,7 @@
(void *)&fwt_access);
if (ret == 0)
- req->ifr_data = (char *)(le32_to_cpu(fwt_access.references));
+ wrq->u.param.value = le32_to_cpu(fwt_access.references);
else
return -EFAULT;
@@ -1823,6 +744,7 @@
*/
static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req)
{
+ struct iwreq *wrq = (struct iwreq *)req;
struct cmd_ds_mesh_access mesh_access;
int ret;
@@ -1835,9 +757,8 @@
cmd_option_waitforrsp, 0,
(void *)&mesh_access);
- if (ret == 0) {
- req->ifr_data = (char *)(le32_to_cpu(mesh_access.data[0]));
- }
+ if (ret == 0)
+ wrq->u.param.value = le32_to_cpu(mesh_access.data[0]);
else
return -EFAULT;
@@ -1898,36 +819,8 @@
lbs_pr_debug(1, "libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd);
switch (cmd) {
- case WLANSCAN_TYPE:
- lbs_pr_debug(1, "Scan type Ioctl\n");
- ret = wlan_scan_type_ioctl(priv, wrq);
- break;
-
case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */
switch (wrq->u.data.flags) {
- case WLANDEAUTH:
- lbs_pr_debug(1, "Deauth\n");
- libertas_send_deauth(priv);
- break;
-
- case WLANADHOCSTOP:
- lbs_pr_debug(1, "Adhoc stop\n");
- ret = libertas_do_adhocstop_ioctl(priv);
- break;
-
- case WLANRADIOON:
- wlan_radio_ioctl(priv, 1);
- break;
-
- case WLANRADIOOFF:
- wlan_radio_ioctl(priv, 0);
- break;
- case WLANWLANIDLEON:
- libertas_idle_on(priv);
- break;
- case WLANWLANIDLEOFF:
- libertas_idle_off(priv);
- break;
case WLAN_SUBCMD_BT_RESET: /* bt_reset */
wlan_bt_reset_ioctl(priv);
break;
@@ -1937,162 +830,19 @@
} /* End of switch */
break;
- case WLANSETWPAIE:
- ret = wlan_setwpaie_ioctl(priv, req);
- break;
- case WLAN_SETINT_GETINT:
- /* The first 4 bytes of req->ifr_data is sub-ioctl number
- * after 4 bytes sits the payload.
- */
- subcmd = (int)req->ifr_data; //from iwpriv subcmd
- switch (subcmd) {
- case WLANNF:
- ret = wlan_get_nf(priv, wrq);
- break;
- case WLANRSSI:
- ret = wlan_get_rssi(priv, wrq);
- break;
- case WLANENABLE11D:
- ret = libertas_cmd_enable_11d(priv, wrq);
- break;
- case WLANADHOCGRATE:
- ret = wlan_do_set_grate_ioctl(priv, wrq);
- break;
- case WLAN_SUBCMD_SET_PRESCAN:
- ret = wlan_subcmd_setprescan_ioctl(priv, wrq);
- break;
- }
- break;
-
- case WLAN_SETONEINT_GETONEINT:
- switch (wrq->u.data.flags) {
- case WLAN_BEACON_INTERVAL:
- ret = wlan_beacon_interval(priv, wrq);
- break;
-
- case WLAN_LISTENINTRVL:
- if (!wrq->u.data.length) {
- int data;
- lbs_pr_debug(1, "Get locallisteninterval value\n");
-#define GET_ONE_INT 1
- data = adapter->locallisteninterval;
- if (copy_to_user(wrq->u.data.pointer,
- &data, sizeof(int))) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = GET_ONE_INT;
- } else {
- int data;
- if (copy_from_user
- (&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- lbs_pr_debug(1, "Set locallisteninterval = %d\n",
- data);
-#define MAX_U16_VAL 65535
- if (data > MAX_U16_VAL) {
- lbs_pr_debug(1, "Exceeds U16 value\n");
- return -EINVAL;
- }
- adapter->locallisteninterval = data;
- }
- break;
- case WLAN_TXCONTROL:
- ret = wlan_txcontrol(priv, wrq); //adds for txcontrol ioctl
- break;
-
- case WLAN_NULLPKTINTERVAL:
- ret = wlan_null_pkt_interval(priv, wrq);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- break;
- }
- break;
-
case WLAN_SETONEINT_GETNONE:
/* The first 4 bytes of req->ifr_data is sub-ioctl number
* after 4 bytes sits the payload.
*/
- subcmd = wrq->u.data.flags; //from wpa_supplicant subcmd
-
+ subcmd = wrq->u.data.flags;
if (!subcmd)
- subcmd = (int)req->ifr_data; //from iwpriv subcmd
+ subcmd = (int)wrq->u.param.value;
switch (subcmd) {
- case WLAN_SUBCMD_SETRXANTENNA: /* SETRXANTENNA */
- idata = SUBCMD_DATA(wrq);
- ret = setrxantenna(priv, idata);
- break;
- case WLAN_SUBCMD_SETTXANTENNA: /* SETTXANTENNA */
- idata = SUBCMD_DATA(wrq);
- ret = settxantenna(priv, idata);
- break;
- case WLAN_SET_ATIM_WINDOW:
- adapter->atimwindow = SUBCMD_DATA(wrq);
- adapter->atimwindow = min_t(__u16, adapter->atimwindow, 50);
- break;
- case WLANSETBCNAVG:
- adapter->bcn_avg_factor = SUBCMD_DATA(wrq);
- if (adapter->bcn_avg_factor == 0)
- adapter->bcn_avg_factor =
- DEFAULT_BCN_AVG_FACTOR;
- if (adapter->bcn_avg_factor > DEFAULT_BCN_AVG_FACTOR)
- adapter->bcn_avg_factor =
- DEFAULT_BCN_AVG_FACTOR;
- break;
- case WLANSETDATAAVG:
- adapter->data_avg_factor = SUBCMD_DATA(wrq);
- if (adapter->data_avg_factor == 0)
- adapter->data_avg_factor =
- DEFAULT_DATA_AVG_FACTOR;
- if (adapter->data_avg_factor > DEFAULT_DATA_AVG_FACTOR)
- adapter->data_avg_factor =
- DEFAULT_DATA_AVG_FACTOR;
- break;
case WLANSETREGION:
idata = SUBCMD_DATA(wrq);
ret = wlan_set_region(priv, (u16) idata);
break;
-
- case WLAN_SET_LISTEN_INTERVAL:
- idata = SUBCMD_DATA(wrq);
- adapter->listeninterval = (u16) idata;
- break;
-
- case WLAN_SET_MULTIPLE_DTIM:
- ret = wlan_set_multiple_dtim_ioctl(priv, req);
- break;
-
- case WLANSETAUTHALG:
- ret = wlan_setauthalg_ioctl(priv, req);
- break;
-
- case WLANSET8021XAUTHALG:
- ret = wlan_set8021xauthalg_ioctl(priv, req);
- break;
-
- case WLANSETENCRYPTIONMODE:
- ret = wlan_setencryptionmode_ioctl(priv, req);
- break;
-
- case WLAN_SET_LINKMODE:
- ret = wlan_set_linkmode_ioctl(priv, req);
- break;
-
- case WLAN_SET_RADIOMODE:
- ret = wlan_set_radiomode_ioctl(priv, req);
- break;
-
- case WLAN_SET_DEBUGMODE:
- ret = wlan_set_debugmode_ioctl(priv, req);
- break;
-
case WLAN_SUBCMD_MESH_SET_TTL:
idata = SUBCMD_DATA(wrq);
ret = wlan_mesh_set_ttl_ioctl(priv, idata);
@@ -2105,38 +855,8 @@
break;
- case WLAN_SETNONE_GETTWELVE_CHAR: /* Get Antenna settings */
- /*
- * We've not used IW_PRIV_TYPE_FIXED so sub-ioctl number is
- * in flags of iwreq structure, otherwise it will be in
- * mode member of iwreq structure.
- */
- switch ((int)wrq->u.data.flags) {
- case WLAN_SUBCMD_GETRXANTENNA: /* Get Rx Antenna */
- ret = wlan_subcmd_getrxantenna_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_GETTXANTENNA: /* Get Tx Antenna */
- ret = wlan_subcmd_gettxantenna_ioctl(priv, req);
- break;
-
- case WLAN_GET_TSF:
- ret = wlan_get_tsf_ioctl(priv, wrq);
- break;
- }
- break;
-
case WLAN_SET128CHAR_GET128CHAR:
switch ((int)wrq->u.data.flags) {
-
- case WLANSCAN_MODE:
- lbs_pr_debug(1, "Scan mode Ioctl\n");
- ret = wlan_scan_mode_ioctl(priv, wrq);
- break;
-
- case WLAN_GET_ADHOC_STATUS:
- ret = wlan_get_adhoc_status_ioctl(priv, wrq);
- break;
case WLAN_SUBCMD_BT_ADD:
ret = wlan_bt_add_ioctl(priv, req);
break;
@@ -2168,41 +888,11 @@
break;
case WLAN_SETNONE_GETONEINT:
- switch ((int)req->ifr_data) {
- case WLANGETBCNAVG:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->bcn_avg_factor;
- break;
-
+ switch (wrq->u.param.value) {
case WLANGETREGION:
pdata = (int *)wrq->u.name;
*pdata = (int)adapter->regioncode;
break;
-
- case WLAN_GET_LISTEN_INTERVAL:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->listeninterval;
- break;
-
- case WLAN_GET_LINKMODE:
- req->ifr_data = (char *)((u32) adapter->linkmode);
- break;
-
- case WLAN_GET_RADIOMODE:
- req->ifr_data = (char *)((u32) adapter->radiomode);
- break;
-
- case WLAN_GET_DEBUGMODE:
- req->ifr_data = (char *)((u32) adapter->debugmode);
- break;
-
- case WLAN_GET_MULTIPLE_DTIM:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->multipledtim;
- break;
- case WLAN_GET_TX_RATE:
- ret = wlan_get_txrate_ioctl(priv, req);
- break;
case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */
ret = wlan_fwt_cleanup_ioctl(priv, req);
break;
@@ -2222,196 +912,8 @@
break;
- case WLANGETLOG:
- ret = wlan_do_getlog_ioctl(priv, wrq);
- break;
-
case WLAN_SET_GET_SIXTEEN_INT:
switch ((int)wrq->u.data.flags) {
- case WLAN_TPCCFG:
- {
- int data[5];
- struct cmd_ds_802_11_tpc_cfg cfg;
- memset(&cfg, 0, sizeof(cfg));
- if ((wrq->u.data.length > 1)
- && (wrq->u.data.length != 5))
- return -1;
-
- if (wrq->u.data.length == 0) {
- cfg.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 5)) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- cfg.action =
- cpu_to_le16
- (cmd_act_set);
- cfg.enable = data[0];
- cfg.usesnr = data[1];
- cfg.P0 = data[2];
- cfg.P1 = data[3];
- cfg.P2 = data[4];
- }
-
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_tpc_cfg,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&cfg);
-
- data[0] = cfg.enable;
- data[1] = cfg.usesnr;
- data[2] = cfg.P0;
- data[3] = cfg.P1;
- data[4] = cfg.P2;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 5)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 5;
- }
- break;
-
- case WLAN_POWERCFG:
- {
- int data[4];
- struct cmd_ds_802_11_pwr_cfg cfg;
- memset(&cfg, 0, sizeof(cfg));
- if ((wrq->u.data.length > 1)
- && (wrq->u.data.length != 4))
- return -1;
- if (wrq->u.data.length == 0) {
- cfg.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 4)) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- cfg.action =
- cpu_to_le16
- (cmd_act_set);
- cfg.enable = data[0];
- cfg.PA_P0 = data[1];
- cfg.PA_P1 = data[2];
- cfg.PA_P2 = data[3];
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_pwr_cfg,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&cfg);
- data[0] = cfg.enable;
- data[1] = cfg.PA_P0;
- data[2] = cfg.PA_P1;
- data[3] = cfg.PA_P2;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 4)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 4;
- }
- break;
- case WLAN_AUTO_FREQ_SET:
- {
- int data[3];
- struct cmd_ds_802_11_afc afc;
- memset(&afc, 0, sizeof(afc));
- if (wrq->u.data.length != 3)
- return -1;
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 3)) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- afc.afc_auto = data[0];
-
- if (afc.afc_auto != 0) {
- afc.threshold = data[1];
- afc.period = data[2];
- } else {
- afc.timing_offset = data[1];
- afc.carrier_offset = data[2];
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_set_afc,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&afc);
- }
- break;
- case WLAN_AUTO_FREQ_GET:
- {
- int data[3];
- struct cmd_ds_802_11_afc afc;
- memset(&afc, 0, sizeof(afc));
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_get_afc,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&afc);
- data[0] = afc.afc_auto;
- data[1] = afc.timing_offset;
- data[2] = afc.carrier_offset;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 3)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 3;
- }
- break;
- case WLAN_SCANPROBES:
- {
- int data;
- if (wrq->u.data.length > 0) {
- if (copy_from_user
- (&data, wrq->u.data.pointer,
- sizeof(int))) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->scanprobes = data;
- } else {
- data = adapter->scanprobes;
- if (copy_to_user
- (wrq->u.data.pointer, &data,
- sizeof(int))) {
- lbs_pr_debug(1,
- "Copy to user failed\n");
- return -EFAULT;
- }
- }
- wrq->u.data.length = 1;
- }
- break;
case WLAN_LED_GPIO_CTRL:
{
int i;
@@ -2475,17 +977,6 @@
wrq->u.data.length = gpio->header.len;
}
break;
- case WLAN_ADAPT_RATESET:
- ret = wlan_adapt_rateset(priv, wrq);
- break;
- case WLAN_INACTIVITY_TIMEOUT:
- ret = wlan_inactivity_timeout(priv, wrq);
- break;
- case WLANSNR:
- ret = wlan_get_snr(priv, wrq);
- break;
- case WLAN_GET_RXINFO:
- ret = wlan_get_rxinfo(priv, wrq);
}
break;
diff --git a/drivers/net/wireless/libertas/join.c b/drivers/net/wireless/libertas/join.c
index 11682cb..d4926b8 100644
--- a/drivers/net/wireless/libertas/join.c
+++ b/drivers/net/wireless/libertas/join.c
@@ -15,6 +15,8 @@
#include "join.h"
#include "dev.h"
+#define AD_HOC_CAP_PRIVACY_ON 1
+
/**
* @brief This function finds out the common rates between rate1 and rate2.
*
@@ -85,7 +87,7 @@
wlan_adapter *adapter = priv->adapter;
int ret = 0;
- if (adapter->inframode == wlan802_11infrastructure &&
+ if (adapter->mode == IW_MODE_INFRA &&
adapter->connect_status == libertas_connected)
ret = libertas_send_deauthentication(priv);
else
@@ -94,20 +96,6 @@
return ret;
}
-int libertas_do_adhocstop_ioctl(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- if (adapter->inframode == wlan802_11ibss &&
- adapter->connect_status == libertas_connected)
- ret = libertas_stop_adhoc_network(priv);
- else
- ret = -ENOTSUPP;
-
- return ret;
-}
-
/**
* @brief Associate to a specific BSS discovered in a scan
*
@@ -207,8 +195,7 @@
/* check if the requested SSID is already joined */
if (adapter->curbssparams.ssid.ssidlength
&& !libertas_SSID_cmp(&pbssdesc->ssid, &adapter->curbssparams.ssid)
- && (adapter->curbssparams.bssdescriptor.inframode ==
- wlan802_11ibss)) {
+ && (adapter->mode == IW_MODE_ADHOC)) {
lbs_pr_debug(1,
"ADHOC_J_CMD: New ad-hoc SSID is the same as current, "
@@ -261,130 +248,6 @@
}
/**
- * @brief Set Idle Off
- *
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-int libertas_idle_off(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
- const u8 zeromac[] = { 0, 0, 0, 0, 0, 0 };
- int i;
-
- ENTER();
-
- if (adapter->connect_status == libertas_disconnected) {
- if (adapter->inframode == wlan802_11infrastructure) {
- if (memcmp(adapter->previousbssid, zeromac,
- sizeof(zeromac)) != 0) {
-
- lbs_pr_debug(1, "Previous SSID = %s\n",
- adapter->previousssid.ssid);
- lbs_pr_debug(1, "Previous BSSID = "
- "%02x:%02x:%02x:%02x:%02x:%02x:\n",
- adapter->previousbssid[0],
- adapter->previousbssid[1],
- adapter->previousbssid[2],
- adapter->previousbssid[3],
- adapter->previousbssid[4],
- adapter->previousbssid[5]);
-
- i = libertas_find_SSID_in_list(adapter,
- &adapter->previousssid,
- adapter->previousbssid,
- adapter->inframode);
-
- if (i < 0) {
- libertas_send_specific_BSSID_scan(priv,
- adapter->
- previousbssid,
- 1);
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid,
- adapter->
- previousbssid,
- adapter->
- inframode);
- }
-
- if (i < 0) {
- /* If the BSSID could not be found, try just the SSID */
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid, NULL,
- adapter->
- inframode);
- }
-
- if (i < 0) {
- libertas_send_specific_SSID_scan(priv,
- &adapter->
- previousssid,
- 1);
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid, NULL,
- adapter->
- inframode);
- }
-
- if (i >= 0) {
- ret =
- wlan_associate(priv,
- &adapter->
- scantable[i]);
- }
- }
- } else if (adapter->inframode == wlan802_11ibss) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_ad_hoc_start,
- 0,
- cmd_option_waitforrsp,
- 0, &adapter->previousssid);
- }
- }
- /* else it is connected */
-
- lbs_pr_debug(1, "\nwlanidle is off");
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set Idle On
- *
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-int libertas_idle_on(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- if (adapter->connect_status == libertas_connected) {
- if (adapter->inframode == wlan802_11infrastructure) {
- lbs_pr_debug(1, "Previous SSID = %s\n",
- adapter->previousssid.ssid);
- memmove(&adapter->previousssid,
- &adapter->curbssparams.ssid,
- sizeof(struct WLAN_802_11_SSID));
- libertas_send_deauth(priv);
-
- } else if (adapter->inframode == wlan802_11ibss) {
- ret = libertas_stop_adhoc_network(priv);
- }
-
- }
-
- lbs_pr_debug(1, "\nwlanidle is on");
-
- return ret;
-}
-
-/**
* @brief This function prepares command of authenticate.
*
* @param priv A pointer to wlan_private structure
@@ -398,22 +261,39 @@
void *pdata_buf)
{
wlan_adapter *adapter = priv->adapter;
- struct cmd_ds_802_11_authenticate *pauthenticate =
- &cmd->params.auth;
+ struct cmd_ds_802_11_authenticate *pauthenticate = &cmd->params.auth;
+ int ret = -1;
u8 *bssid = pdata_buf;
cmd->command = cpu_to_le16(cmd_802_11_authenticate);
- cmd->size =
- cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
- + S_DS_GEN);
+ cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
+ + S_DS_GEN);
- pauthenticate->authtype = adapter->secinfo.authmode;
+ /* translate auth mode to 802.11 defined wire value */
+ switch (adapter->secinfo.auth_mode) {
+ case IW_AUTH_ALG_OPEN_SYSTEM:
+ pauthenticate->authtype = 0x00;
+ break;
+ case IW_AUTH_ALG_SHARED_KEY:
+ pauthenticate->authtype = 0x01;
+ break;
+ case IW_AUTH_ALG_LEAP:
+ pauthenticate->authtype = 0x80;
+ break;
+ default:
+ lbs_pr_debug(1, "AUTH_CMD: invalid auth alg 0x%X\n",
+ adapter->secinfo.auth_mode);
+ goto out;
+ }
+
memcpy(pauthenticate->macaddr, bssid, ETH_ALEN);
lbs_pr_debug(1, "AUTH_CMD: Bssid is : %x:%x:%x:%x:%x:%x\n",
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
+ ret = 0;
- return 0;
+out:
+ return ret;
}
int libertas_cmd_80211_deauthenticate(wlan_private * priv,
@@ -550,7 +430,7 @@
lbs_pr_debug(1, "ASSOC_CMD: rates->header.len = %d\n", rates->header.len);
/* set IBSS field */
- if (pbssdesc->inframode == wlan802_11infrastructure) {
+ if (pbssdesc->mode == IW_MODE_INFRA) {
#define CAPINFO_ESS_MODE 1
passo->capinfo.ess = CAPINFO_ESS_MODE;
}
@@ -624,7 +504,7 @@
/* set the BSS type */
adhs->bsstype = cmd_bss_type_ibss;
- pbssdesc->inframode = wlan802_11ibss;
+ pbssdesc->mode = IW_MODE_ADHOC;
adhs->beaconperiod = adapter->beaconperiod;
/* set Physical param set */
@@ -666,15 +546,12 @@
adhs->probedelay = cpu_to_le16(cmd_scan_probe_delay_time);
/* set up privacy in adapter->scantable[i] */
- if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
-
-#define AD_HOC_CAP_PRIVACY_ON 1
- lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus set, privacy to WEP\n");
+ if (adapter->secinfo.wep_enabled) {
+ lbs_pr_debug(1, "ADHOC_S_CMD: WEP enabled, setting privacy on\n");
pbssdesc->privacy = wlan802_11privfilter8021xWEP;
adhs->cap.privacy = AD_HOC_CAP_PRIVACY_ON;
} else {
- lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus NOT set, Setting "
- "privacy to ACCEPT ALL\n");
+ lbs_pr_debug(1, "ADHOC_S_CMD: WEP disabled, setting privacy off\n");
pbssdesc->privacy = wlan802_11privfilteracceptall;
}
@@ -786,9 +663,6 @@
padhocjoin->bssdescriptor.BSSID[5],
padhocjoin->bssdescriptor.SSID);
- lbs_pr_debug(1, "ADHOC_J_CMD: Data Rate = %x\n",
- (u32) padhocjoin->bssdescriptor.datarates);
-
/* failtimeout */
padhocjoin->failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT);
@@ -832,7 +706,7 @@
padhocjoin->bssdescriptor.ssparamset.ibssparamset.atimwindow =
cpu_to_le16(pbssdesc->atimwindow);
- if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
+ if (adapter->secinfo.wep_enabled) {
padhocjoin->bssdescriptor.cap.privacy = AD_HOC_CAP_PRIVACY_ON;
}
diff --git a/drivers/net/wireless/libertas/join.h b/drivers/net/wireless/libertas/join.h
index 8efa245..115f5a8 100644
--- a/drivers/net/wireless/libertas/join.h
+++ b/drivers/net/wireless/libertas/join.h
@@ -1,6 +1,3 @@
-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
/**
* Interface for the wlan infrastructure and adhoc join routines
*
@@ -40,10 +37,6 @@
extern int libertas_ret_80211_associate(wlan_private * priv,
struct cmd_ds_command *resp);
-extern int libertas_idle_on(wlan_private * priv);
-extern int libertas_idle_off(wlan_private * priv);
-
-extern int libertas_do_adhocstop_ioctl(wlan_private * priv);
extern int libertas_reassociation_thread(void *data);
struct WLAN_802_11_SSID;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index dcbf102..b9b25ce 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -21,6 +21,13 @@
#include "debugfs.h"
#include "assoc.h"
+#define DRIVER_RELEASE_VERSION "320.p0"
+const char libertas_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
+#ifdef DEBUG
+ "-dbg"
+#endif
+ "";
+
#ifdef ENABLE_PM
static struct pm_dev *wlan_pm_dev = NULL;
#endif
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 7e3f78f..d17924f 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -210,7 +210,7 @@
goto done;
}
- lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %d = %d\n",
+ lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
lbs_dbg_hex("RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
@@ -364,7 +364,7 @@
priv->stats.rx_errors++;
}
- lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %d = %d\n",
+ lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
/* create the exported radio header */
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index e187062..3c0b1a2 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -1,6 +1,3 @@
-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
/**
* Functions implementing wlan scan IOCTL and firmware command APIs
*
@@ -87,118 +84,95 @@
*
* @return Index in scantable, or error code if negative
*/
-static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
+static int is_network_compatible(wlan_adapter * adapter, int index, u8 mode)
{
ENTER();
- if (adapter->scantable[index].inframode == mode) {
- if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ if (adapter->scantable[index].mode == mode) {
+ if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
- && adapter->scantable[index].wpa_supplicant.wpa_ie[0] !=
- WPA_IE
- && adapter->scantable[index].wpa2_supplicant.wpa_ie[0] !=
- WPA2_IE && adapter->secinfo.Encryptionmode == CIPHER_NONE
+ && adapter->scantable[index].wpa_ie[0] != WPA_IE
+ && adapter->scantable[index].rsn_ie[0] != WPA2_IE
&& !adapter->scantable[index].privacy) {
/* no security */
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled
+ } else if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
&& adapter->scantable[index].privacy) {
/* static WEP enabled */
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ } else if ( !adapter->secinfo.wep_enabled
&& adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
- && (adapter->scantable[index].wpa_supplicant.
- wpa_ie[0]
- == WPA_IE)
+ && (adapter->scantable[index].wpa_ie[0] == WPA_IE)
/* privacy bit may NOT be set in some APs like LinkSys WRT54G
&& adapter->scantable[index].privacy */
) {
/* WPA enabled */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() WPA: index=%d wpa_ie=%#x "
- "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s Encmode=%#x "
+ "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
"privacy=%#x\n", index,
- adapter->scantable[index].wpa_supplicant.
- wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0],
- (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) ? "e" : "d",
- (adapter->secinfo.WPAenabled) ? "e" : "d",
- (adapter->secinfo.WPA2enabled) ? "e" : "d",
- adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
+ adapter->secinfo.wep_enabled ? "e" : "d",
+ adapter->secinfo.WPAenabled ? "e" : "d",
+ adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ } else if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& adapter->secinfo.WPA2enabled
- && (adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0]
- == WPA2_IE)
+ && (adapter->scantable[index].rsn_ie[0] == WPA2_IE)
/* privacy bit may NOT be set in some APs like LinkSys WRT54G
&& adapter->scantable[index].privacy */
) {
/* WPA2 enabled */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() WPA2: index=%d wpa_ie=%#x "
- "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s Encmode=%#x "
+ "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
"privacy=%#x\n", index,
- adapter->scantable[index].wpa_supplicant.
- wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0],
- (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) ? "e" : "d",
- (adapter->secinfo.WPAenabled) ? "e" : "d",
- (adapter->secinfo.WPA2enabled) ? "e" : "d",
- adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
+ adapter->secinfo.wep_enabled ? "e" : "d",
+ adapter->secinfo.WPAenabled ? "e" : "d",
+ adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ } else if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
- && (adapter->scantable[index].wpa_supplicant.
- wpa_ie[0]
- != WPA_IE)
- && (adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0]
- != WPA2_IE)
- && adapter->secinfo.Encryptionmode != CIPHER_NONE
+ && (adapter->scantable[index].wpa_ie[0] != WPA_IE)
+ && (adapter->scantable[index].rsn_ie[0] != WPA2_IE)
&& adapter->scantable[index].privacy) {
/* dynamic WEP enabled */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() dynamic WEP: index=%d "
- "wpa_ie=%#x wpa2_ie=%#x Encmode=%#x privacy=%#x\n",
+ "wpa_ie=%#x wpa2_ie=%#x privacy=%#x\n",
index,
- adapter->scantable[index].wpa_supplicant.
- wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0], adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
adapter->scantable[index].privacy);
LEAVE();
return index;
}
/* security doesn't match */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() FAILED: index=%d wpa_ie=%#x "
- "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s Encmode=%#x privacy=%#x\n",
+ "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s privacy=%#x\n",
index,
- adapter->scantable[index].wpa_supplicant.wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.wpa_ie[0],
- (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) ? "e" : "d",
- (adapter->secinfo.WPAenabled) ? "e" : "d",
- (adapter->secinfo.WPA2enabled) ? "e" : "d",
- adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
+ adapter->secinfo.wep_enabled ? "e" : "d",
+ adapter->secinfo.WPAenabled ? "e" : "d",
+ adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return -ECONNREFUSED;
@@ -924,8 +898,6 @@
u8 founddatarateie;
int bytesleftforcurrentbeacon;
- struct WPA_SUPPLICANT *pwpa_supplicant;
- struct WPA_SUPPLICANT *pwpa2_supplicant;
struct IE_WPA *pIe;
const u8 oui01[4] = { 0x00, 0x50, 0xf2, 0x01 };
@@ -962,9 +934,6 @@
bytesleftforcurrentbeacon = beaconsize;
- pwpa_supplicant = &pBSSEntry->wpa_supplicant;
- pwpa2_supplicant = &pBSSEntry->wpa2_supplicant;
-
memcpy(pBSSEntry->macaddress, pcurrentptr, ETH_ALEN);
lbs_pr_debug(1, "InterpretIE: AP MAC Addr-%x:%x:%x:%x:%x:%x\n",
pBSSEntry->macaddress[0], pBSSEntry->macaddress[1],
@@ -1027,9 +996,9 @@
}
if (pcap->ibss == 1) {
- pBSSEntry->inframode = wlan802_11ibss;
+ pBSSEntry->mode = IW_MODE_ADHOC;
} else {
- pBSSEntry->inframode = wlan802_11infrastructure;
+ pBSSEntry->mode = IW_MODE_INFRA;
}
/* process variable IE */
@@ -1116,7 +1085,7 @@
sizeof(pcountryinfo->countrycode)
|| pcountryinfo->len > 254) {
lbs_pr_debug(1, "InterpretIE: 11D- Err "
- "CountryInfo len =%d min=%d max=254\n",
+ "CountryInfo len =%d min=%zd max=254\n",
pcountryinfo->len,
sizeof(pcountryinfo->countrycode));
LEAVE();
@@ -1160,27 +1129,27 @@
#define IE_ID_LEN_FIELDS_BYTES 2
pIe = (struct IE_WPA *)pcurrentptr;
- if (!memcmp(pIe->oui, oui01, sizeof(oui01))) {
- pwpa_supplicant->wpa_ie_len
- = min_t(size_t, elemlen + IE_ID_LEN_FIELDS_BYTES,
- sizeof(pwpa_supplicant->wpa_ie));
- memcpy(pwpa_supplicant->wpa_ie,
- pcurrentptr,
- pwpa_supplicant->wpa_ie_len);
- lbs_dbg_hex("InterpretIE: Resp WPA_IE",
- pwpa_supplicant->wpa_ie, elemlen);
- }
+ if (memcmp(pIe->oui, oui01, sizeof(oui01)))
+ break;
+
+ pBSSEntry->wpa_ie_len = min_t(size_t,
+ elemlen + IE_ID_LEN_FIELDS_BYTES,
+ sizeof(pBSSEntry->wpa_ie));
+ memcpy(pBSSEntry->wpa_ie, pcurrentptr,
+ pBSSEntry->wpa_ie_len);
+ lbs_dbg_hex("InterpretIE: Resp WPA_IE",
+ pBSSEntry->wpa_ie, elemlen);
break;
case WPA2_IE:
pIe = (struct IE_WPA *)pcurrentptr;
- pwpa2_supplicant->wpa_ie_len
- = min_t(size_t, elemlen + IE_ID_LEN_FIELDS_BYTES,
- sizeof(pwpa2_supplicant->wpa_ie));
- memcpy(pwpa2_supplicant->wpa_ie,
- pcurrentptr, pwpa2_supplicant->wpa_ie_len);
+ pBSSEntry->rsn_ie_len = min_t(size_t,
+ elemlen + IE_ID_LEN_FIELDS_BYTES,
+ sizeof(pBSSEntry->rsn_ie));
+ memcpy(pBSSEntry->rsn_ie, pcurrentptr,
+ pBSSEntry->rsn_ie_len);
lbs_dbg_hex("InterpretIE: Resp WPA2_IE",
- pwpa2_supplicant->wpa_ie, elemlen);
+ pBSSEntry->rsn_ie, elemlen);
break;
case TIM:
break;
@@ -1227,7 +1196,7 @@
*
* @return index in BSSID list, or error return code (< 0)
*/
-int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode)
+int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, u8 mode)
{
int ret = -ENETUNREACH;
int i;
@@ -1247,8 +1216,8 @@
for (i = 0; ret < 0 && i < adapter->numinscantable; i++) {
if (!memcmp(adapter->scantable[i].macaddress, bssid, ETH_ALEN)) {
switch (mode) {
- case wlan802_11infrastructure:
- case wlan802_11ibss:
+ case IW_MODE_INFRA:
+ case IW_MODE_ADHOC:
ret = is_network_compatible(adapter, i, mode);
break;
default:
@@ -1272,7 +1241,7 @@
* @return index in BSSID list
*/
int libertas_find_SSID_in_list(wlan_adapter * adapter,
- struct WLAN_802_11_SSID *ssid, u8 * bssid, int mode)
+ struct WLAN_802_11_SSID *ssid, u8 * bssid, u8 mode)
{
int net = -ENETUNREACH;
u8 bestrssi = 0;
@@ -1287,8 +1256,8 @@
!memcmp(adapter->scantable[i].
macaddress, bssid, ETH_ALEN))) {
switch (mode) {
- case wlan802_11infrastructure:
- case wlan802_11ibss:
+ case IW_MODE_INFRA:
+ case IW_MODE_ADHOC:
j = is_network_compatible(adapter, i, mode);
if (j >= 0) {
@@ -1311,7 +1280,7 @@
}
}
break;
- case wlan802_11autounknown:
+ case IW_MODE_AUTO:
default:
if (SCAN_RSSI(adapter->scantable[i].rssi)
> bestrssi) {
@@ -1338,8 +1307,7 @@
*
* @return index in BSSID list
*/
-int libertas_find_best_SSID_in_list(wlan_adapter * adapter,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode)
+int libertas_find_best_SSID_in_list(wlan_adapter * adapter, u8 mode)
{
int bestnet = -ENETUNREACH;
u8 bestrssi = 0;
@@ -1351,8 +1319,8 @@
for (i = 0; i < adapter->numinscantable; i++) {
switch (mode) {
- case wlan802_11infrastructure:
- case wlan802_11ibss:
+ case IW_MODE_INFRA:
+ case IW_MODE_ADHOC:
if (is_network_compatible(adapter, i, mode) >= 0) {
if (SCAN_RSSI(adapter->scantable[i].rssi) >
bestrssi) {
@@ -1363,7 +1331,7 @@
}
}
break;
- case wlan802_11autounknown:
+ case IW_MODE_AUTO:
default:
if (SCAN_RSSI(adapter->scantable[i].rssi) > bestrssi) {
bestrssi =
@@ -1388,8 +1356,7 @@
*/
int libertas_find_best_network_SSID(wlan_private * priv,
struct WLAN_802_11_SSID *pSSID,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE preferred_mode,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE *out_mode)
+ u8 preferred_mode, u8 *out_mode)
{
wlan_adapter *adapter = priv->adapter;
int ret = 0;
@@ -1414,7 +1381,7 @@
preqbssid = &adapter->scantable[i];
memcpy(pSSID, &preqbssid->ssid,
sizeof(struct WLAN_802_11_SSID));
- *out_mode = preqbssid->inframode;
+ *out_mode = preqbssid->mode;
if (!pSSID->ssidlength) {
ret = -1;
@@ -1584,7 +1551,7 @@
for (i = 0; i < adapter->numinscantable; i++) {
if ((current_ev + MAX_SCAN_CELL_SIZE) >= end_buf) {
lbs_pr_debug(1, "i=%d break out: current_ev=%p end_buf=%p "
- "MAX_SCAN_CELL_SIZE=%d\n",
+ "MAX_SCAN_CELL_SIZE=%zd\n",
i, current_ev, end_buf, MAX_SCAN_CELL_SIZE);
break;
}
@@ -1632,7 +1599,7 @@
//Add mode
iwe.cmd = SIOCGIWMODE;
- iwe.u.mode = adapter->scantable[i].inframode + 1;
+ iwe.u.mode = adapter->scantable[i].mode;
iwe.len = IW_EV_UINT_LEN;
current_ev =
iwe_stream_add_event(current_ev, end_buf, &iwe, iwe.len);
@@ -1666,7 +1633,7 @@
iwe.u.qual.noise =
CAL_NF(adapter->NF[TYPE_BEACON][TYPE_NOAVG]);
}
- if ((adapter->inframode == wlan802_11ibss) &&
+ if ((adapter->mode == IW_MODE_ADHOC) &&
!libertas_SSID_cmp(&adapter->curbssparams.ssid,
&adapter->scantable[i].ssid)
&& adapter->adhoccreate) {
@@ -1731,7 +1698,7 @@
end_buf, &iwe, iwe.len);
}
- if ((adapter->scantable[i].inframode == wlan802_11ibss)
+ if ((adapter->scantable[i].mode == IW_MODE_ADHOC)
&& !libertas_SSID_cmp(&adapter->curbssparams.ssid,
&adapter->scantable[i].ssid)
&& adapter->adhoccreate) {
@@ -1745,30 +1712,24 @@
/* Add new value to event */
current_val = current_ev + IW_EV_LCP_LEN;
- if (adapter->scantable[i].wpa2_supplicant.wpa_ie[0] == WPA2_IE) {
+ if (adapter->scantable[i].rsn_ie[0] == WPA2_IE) {
memset(&iwe, 0, sizeof(iwe));
memset(buf, 0, sizeof(buf));
- memcpy(buf, adapter->scantable[i].
- wpa2_supplicant.wpa_ie,
- adapter->scantable[i].wpa2_supplicant.
- wpa_ie_len);
+ memcpy(buf, adapter->scantable[i].rsn_ie,
+ adapter->scantable[i].rsn_ie_len);
iwe.cmd = IWEVGENIE;
- iwe.u.data.length = adapter->scantable[i].
- wpa2_supplicant.wpa_ie_len;
+ iwe.u.data.length = adapter->scantable[i].rsn_ie_len;
iwe.len = IW_EV_POINT_LEN + iwe.u.data.length;
current_ev = iwe_stream_add_point(current_ev, end_buf,
&iwe, buf);
}
- if (adapter->scantable[i].wpa_supplicant.wpa_ie[0] == WPA_IE) {
+ if (adapter->scantable[i].wpa_ie[0] == WPA_IE) {
memset(&iwe, 0, sizeof(iwe));
memset(buf, 0, sizeof(buf));
- memcpy(buf, adapter->scantable[i].
- wpa_supplicant.wpa_ie,
- adapter->scantable[i].wpa_supplicant.
- wpa_ie_len);
+ memcpy(buf, adapter->scantable[i].wpa_ie,
+ adapter->scantable[i].wpa_ie_len);
iwe.cmd = IWEVGENIE;
- iwe.u.data.length = adapter->scantable[i].
- wpa_supplicant.wpa_ie_len;
+ iwe.u.data.length = adapter->scantable[i].wpa_ie_len;
iwe.len = IW_EV_POINT_LEN + iwe.u.data.length;
current_ev = iwe_stream_add_point(current_ev, end_buf,
&iwe, buf);
diff --git a/drivers/net/wireless/libertas/scan.h b/drivers/net/wireless/libertas/scan.h
index d93aa7f..405f4f0 100644
--- a/drivers/net/wireless/libertas/scan.h
+++ b/drivers/net/wireless/libertas/scan.h
@@ -1,6 +1,3 @@
-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
/**
* Interface for the wlan network scan routines
*
@@ -10,6 +7,7 @@
#ifndef _WLAN_SCAN_H
#define _WLAN_SCAN_H
+#include <net/ieee80211.h>
#include "hostcmd.h"
/**
@@ -155,7 +153,7 @@
u32 atimwindow;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE inframode;
+ u8 mode;
u8 libertas_supported_rates[WLAN_SUPPORTED_RATES];
int extra_ie;
@@ -170,22 +168,22 @@
struct ieeetypes_countryinfofullset countryinfo;
- struct WPA_SUPPLICANT wpa_supplicant;
- struct WPA_SUPPLICANT wpa2_supplicant;
-
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+ u8 rsn_ie[MAX_WPA_IE_LEN];
+ size_t rsn_ie_len;
};
extern int libertas_SSID_cmp(struct WLAN_802_11_SSID *ssid1,
struct WLAN_802_11_SSID *ssid2);
extern int libertas_find_SSID_in_list(wlan_adapter * adapter, struct WLAN_802_11_SSID *ssid,
- u8 * bssid, int mode);
-int libertas_find_best_SSID_in_list(wlan_adapter * adapter, enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode);
-extern int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode);
+ u8 * bssid, u8 mode);
+int libertas_find_best_SSID_in_list(wlan_adapter * adapter, u8 mode);
+extern int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, u8 mode);
int libertas_find_best_network_SSID(wlan_private * priv,
struct WLAN_802_11_SSID *pSSID,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE preferred_mode,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE *out_mode);
+ u8 preferred_mode, u8 *out_mode);
extern int libertas_send_specific_SSID_scan(wlan_private * priv,
struct WLAN_802_11_SSID *prequestedssid,
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 82d0622..d4b1347 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -78,7 +78,7 @@
min_t(unsigned int, skb->len, 100));
if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) {
- lbs_pr_debug(1, "Tx error: Bad skb length %d : %d\n",
+ lbs_pr_debug(1, "Tx error: Bad skb length %d : %zd\n",
skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE);
ret = -1;
goto done;
diff --git a/drivers/net/wireless/libertas/version.h b/drivers/net/wireless/libertas/version.h
index e86f65a..8b13789 100644
--- a/drivers/net/wireless/libertas/version.h
+++ b/drivers/net/wireless/libertas/version.h
@@ -1,8 +1 @@
-#define DRIVER_RELEASE_VERSION "320.p0"
-const char libertas_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
-#ifdef DEBUG
- "-dbg"
-#endif
- "";
-
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index 4a52336..69f52b6 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -17,7 +17,6 @@
#include "defs.h"
#include "dev.h"
#include "join.h"
-#include "version.h"
#include "wext.h"
#include "assoc.h"
@@ -233,7 +232,7 @@
// find out the BSSID that matches the current SSID
i = libertas_find_SSID_in_list(adapter, &curadhocssid, NULL,
- wlan802_11ibss);
+ IW_MODE_ADHOC);
if (i >= 0) {
lbs_pr_debug(1, "SSID found at %d in List,"
@@ -316,13 +315,11 @@
ENTER();
if (adapter->connect_status != libertas_connected) {
- if (adapter->inframode == wlan802_11infrastructure) {
- //Infra. mode
+ if (adapter->mode == IW_MODE_INFRA) {
lbs_pr_debug(1, "Infra\n");
k = copyrates(rates, k, libertas_supported_rates,
sizeof(libertas_supported_rates));
} else {
- //ad-hoc mode
lbs_pr_debug(1, "Adhoc G\n");
k = copyrates(rates, k, libertas_adhoc_rates_g,
sizeof(libertas_adhoc_rates_g));
@@ -586,20 +583,7 @@
ENTER();
- switch (adapter->inframode) {
- case wlan802_11ibss:
- *uwrq = IW_MODE_ADHOC;
- break;
-
- case wlan802_11infrastructure:
- *uwrq = IW_MODE_INFRA;
- break;
-
- default:
- case wlan802_11autounknown:
- *uwrq = IW_MODE_AUTO;
- break;
- }
+ *uwrq = adapter->mode;
LEAVE();
return 0;
@@ -1002,149 +986,18 @@
/*
* { cmd, set_args, get_args, name }
*/
- {
- WLANSCAN_TYPE,
- IW_PRIV_TYPE_CHAR | 8,
- IW_PRIV_TYPE_CHAR | 8,
- "scantype"},
-
- {
- WLAN_SETINT_GETINT,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- ""},
- {
- WLANNF,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getNF"},
- {
- WLANRSSI,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getRSSI"},
- {
- WLANENABLE11D,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "enable11d"},
- {
- WLANADHOCGRATE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "adhocgrate"},
-
- {
- WLAN_SUBCMD_SET_PRESCAN,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "prescan"},
- {
- WLAN_SETONEINT_GETONEINT,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- ""},
- {
- WLAN_BEACON_INTERVAL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "bcninterval"},
- {
- WLAN_LISTENINTRVL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "lolisteninter"},
- {
- WLAN_TXCONTROL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "txcontrol"},
- {
- WLAN_NULLPKTINTERVAL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "psnullinterval"},
/* Using iwpriv sub-command feature */
{
WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
""},
-
- {
- WLAN_SUBCMD_SETRXANTENNA,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setrxant"},
- {
- WLAN_SUBCMD_SETTXANTENNA,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "settxant"},
- {
- WLANSETAUTHALG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "authalgs",
- },
- {
- WLANSET8021XAUTHALG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "8021xauthalgs",
- },
- {
- WLANSETENCRYPTIONMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "encryptionmode",
- },
{
WLANSETREGION,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
"setregioncode"},
{
- WLAN_SET_LISTEN_INTERVAL,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setlisteninter"},
- {
- WLAN_SET_MULTIPLE_DTIM,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setmultipledtim"},
- {
- WLAN_SET_ATIM_WINDOW,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "atimwindow"},
- {
- WLANSETBCNAVG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setbcnavg"},
- {
- WLANSETDATAAVG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setdataavg"},
- {
- WLAN_SET_LINKMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "linkmode"},
- {
- WLAN_SET_RADIOMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "radiomode"},
- {
- WLAN_SET_DEBUGMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "debugmode"},
- {
WLAN_SUBCMD_MESH_SET_TTL,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
@@ -1160,41 +1013,6 @@
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"getregioncode"},
{
- WLAN_GET_LISTEN_INTERVAL,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getlisteninter"},
- {
- WLAN_GET_MULTIPLE_DTIM,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getmultipledtim"},
- {
- WLAN_GET_TX_RATE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "gettxrate"},
- {
- WLANGETBCNAVG,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getbcnavg"},
- {
- WLAN_GET_LINKMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_linkmode"},
- {
- WLAN_GET_RADIOMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_radiomode"},
- {
- WLAN_GET_DEBUGMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_debugmode"},
- {
WLAN_SUBCMD_FWT_CLEANUP,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
@@ -1210,61 +1028,11 @@
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"mesh_get_ttl"},
{
- WLAN_SETNONE_GETTWELVE_CHAR,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- ""},
- {
- WLAN_SUBCMD_GETRXANTENNA,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "getrxant"},
- {
- WLAN_SUBCMD_GETTXANTENNA,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "gettxant"},
- {
- WLAN_GET_TSF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "gettsf"},
- {
WLAN_SETNONE_GETNONE,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
""},
{
- WLANDEAUTH,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "deauth"},
- {
- WLANADHOCSTOP,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "adhocstop"},
- {
- WLANRADIOON,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "radioon"},
- {
- WLANRADIOOFF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "radiooff"},
- {
- WLANWLANIDLEON,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "wlanidle-on"},
- {
- WLANWLANIDLEOFF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "wlanidle-off"},
- {
WLAN_SUBCMD_FWT_RESET,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
@@ -1327,90 +1095,15 @@
IW_PRIV_TYPE_CHAR | 128,
"fwt_list_route"},
{
- WLANSCAN_MODE,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "scanmode"},
- {
- WLAN_GET_ADHOC_STATUS,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "getadhocstatus"},
- {
- WLAN_SETNONE_GETWORDCHAR,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 128,
- ""},
- {
- WLANSETWPAIE,
- IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 24,
- IW_PRIV_TYPE_NONE,
- "setwpaie"},
- {
- WLANGETLOG,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | GETLOG_BUFSIZE,
- "getlog"},
- {
WLAN_SET_GET_SIXTEEN_INT,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
""},
{
- WLAN_TPCCFG,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "tpccfg"},
- {
- WLAN_POWERCFG,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "powercfg"},
- {
- WLAN_AUTO_FREQ_SET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "setafc"},
- {
- WLAN_AUTO_FREQ_GET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getafc"},
- {
- WLAN_SCANPROBES,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "scanprobes"},
- {
WLAN_LED_GPIO_CTRL,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
"ledgpio"},
- {
- WLAN_ADAPT_RATESET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "rateadapt"},
- {
- WLAN_INACTIVITY_TIMEOUT,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "inactivityto"},
- {
- WLANSNR,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getSNR"},
- {
- WLAN_GET_RATE,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getrate"},
- {
- WLAN_GET_RXINFO,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getrxinfo"},
};
static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
@@ -1434,7 +1127,7 @@
ENTER();
- priv->wstats.status = adapter->inframode;
+ priv->wstats.status = adapter->mode;
/* If we're not associated, all quality values are meaningless */
if (adapter->connect_status != libertas_connected)
@@ -1568,13 +1261,12 @@
if (!cfp) {
rc = -EINVAL;
} else {
- if (adapter->inframode == wlan802_11ibss) {
+ if (adapter->mode == IW_MODE_ADHOC) {
rc = changeadhocchannel(priv, channel);
/* If station is WEP enabled, send the
* command to set WEP in firmware
*/
- if (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) {
+ if (adapter->secinfo.wep_enabled) {
lbs_pr_debug(1, "set_freq: WEP enabled\n");
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_set_wep,
@@ -1716,49 +1408,31 @@
wlan_private *priv = dev->priv;
wlan_adapter *adapter = priv->adapter;
struct assoc_request * assoc_req;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE new_mode;
ENTER();
- switch (*uwrq) {
- case IW_MODE_ADHOC:
- lbs_pr_debug(1, "Wanted mode is ad-hoc: current datarate=%#x\n",
- adapter->datarate);
- new_mode = wlan802_11ibss;
- adapter->adhocchannel = DEFAULT_AD_HOC_CHANNEL;
- break;
-
- case IW_MODE_INFRA:
- lbs_pr_debug(1, "Wanted mode is Infrastructure\n");
- new_mode = wlan802_11infrastructure;
- break;
-
- case IW_MODE_AUTO:
- lbs_pr_debug(1, "Wanted mode is Auto\n");
- new_mode = wlan802_11autounknown;
- break;
-
- default:
- lbs_pr_debug(1, "Wanted mode is Unknown: 0x%x\n", *uwrq);
- return -EINVAL;
+ if ( (*uwrq != IW_MODE_ADHOC)
+ && (*uwrq != IW_MODE_INFRA)
+ && (*uwrq != IW_MODE_AUTO)) {
+ lbs_pr_debug(1, "Invalid mode: 0x%x\n", *uwrq);
+ ret = -EINVAL;
+ goto out;
}
mutex_lock(&adapter->lock);
assoc_req = wlan_get_association_request(adapter);
if (!assoc_req) {
ret = -ENOMEM;
+ wlan_cancel_association_work(priv);
} else {
- assoc_req->mode = new_mode;
- }
-
- if (ret == 0) {
+ assoc_req->mode = *uwrq;
set_bit(ASSOC_FLAG_MODE, &assoc_req->flags);
wlan_postpone_association_work(priv);
- } else {
- wlan_cancel_association_work(priv);
+ lbs_pr_debug(1, "Switching to mode: 0x%x\n", *uwrq);
}
mutex_unlock(&adapter->lock);
+out:
LEAVE();
return ret;
}
@@ -1789,13 +1463,13 @@
dwrq->flags = 0;
/* Authentication method */
- switch (adapter->secinfo.authmode) {
- case wlan802_11authmodeopen:
+ switch (adapter->secinfo.auth_mode) {
+ case IW_AUTH_ALG_OPEN_SYSTEM:
dwrq->flags = IW_ENCODE_OPEN;
break;
- case wlan802_11authmodeshared:
- case wlan802_11authmodenetworkEAP:
+ case IW_AUTH_ALG_SHARED_KEY:
+ case IW_AUTH_ALG_LEAP:
dwrq->flags = IW_ENCODE_RESTRICTED;
break;
default:
@@ -1803,8 +1477,9 @@
break;
}
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
- || adapter->secinfo.WPAenabled || adapter->secinfo.WPA2enabled) {
+ if ( adapter->secinfo.wep_enabled
+ || adapter->secinfo.WPAenabled
+ || adapter->secinfo.WPA2enabled) {
dwrq->flags &= ~IW_ENCODE_DISABLED;
} else {
dwrq->flags |= IW_ENCODE_DISABLED;
@@ -1818,8 +1493,7 @@
if (index < 0)
index = adapter->wep_tx_keyidx;
- if ((adapter->wep_keys[index].len) &&
- (adapter->secinfo.WEPstatus == wlan802_11WEPenabled)) {
+ if ((adapter->wep_keys[index].len) && adapter->secinfo.wep_enabled) {
memcpy(extra, adapter->wep_keys[index].key,
adapter->wep_keys[index].len);
dwrq->length = adapter->wep_keys[index].len;
@@ -1903,7 +1577,7 @@
assoc_req->wep_tx_keyidx = index;
}
- assoc_req->secinfo.WEPstatus = wlan802_11WEPenabled;
+ assoc_req->secinfo.wep_enabled = 1;
LEAVE();
return 0;
@@ -1932,10 +1606,10 @@
int i;
/* Set Open System auth mode */
- assoc_req->secinfo.authmode = wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
/* Clear WEP keys and mark WEP as disabled */
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ assoc_req->secinfo.wep_enabled = 0;
for (i = 0; i < 4; i++)
assoc_req->wep_keys[i].len = 0;
@@ -1987,8 +1661,7 @@
/* If WEP isn't enabled, or if there is no key data but a valid
* index, set the TX key.
*/
- if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
- || (dwrq->length == 0 && !is_default))
+ if (!assoc_req->secinfo.wep_enabled || (dwrq->length == 0 && !is_default))
set_tx_key = 1;
ret = wlan_set_wep_key(assoc_req, extra, dwrq->length, index, set_tx_key);
@@ -2001,9 +1674,9 @@
set_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags);
if (dwrq->flags & IW_ENCODE_RESTRICTED) {
- assoc_req->secinfo.authmode = wlan802_11authmodeshared;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY;
} else if (dwrq->flags & IW_ENCODE_OPEN) {
- assoc_req->secinfo.authmode = wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
out:
@@ -2056,30 +1729,31 @@
if (!ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY &&
ext->alg != IW_ENCODE_ALG_WEP) {
- if (index != 0 || adapter->inframode != wlan802_11infrastructure)
+ if (index != 0 || adapter->mode != IW_MODE_INFRA)
goto out;
}
dwrq->flags = index + 1;
memset(ext, 0, sizeof(*ext));
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled)
- && !adapter->secinfo.WPAenabled && !adapter->secinfo.WPA2enabled) {
+ if ( !adapter->secinfo.wep_enabled
+ && !adapter->secinfo.WPAenabled
+ && !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_NONE;
ext->key_len = 0;
dwrq->flags |= IW_ENCODE_DISABLED;
} else {
u8 *key = NULL;
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
+ if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_WEP;
ext->key_len = adapter->wep_keys[index].len;
key = &adapter->wep_keys[index].key[0];
- } else if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled) &&
- (adapter->secinfo.WPAenabled ||
- adapter->secinfo.WPA2enabled)) {
+ } else if ( !adapter->secinfo.wep_enabled
+ && (adapter->secinfo.WPAenabled ||
+ adapter->secinfo.WPA2enabled)) {
/* WPA */
ext->alg = IW_ENCODE_ALG_TKIP;
ext->key_len = 0;
@@ -2149,7 +1823,7 @@
/* If WEP isn't enabled, or if there is no key data but a valid
* index, or if the set-TX-key flag was passed, set the TX key.
*/
- if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
+ if ( !assoc_req->secinfo.wep_enabled
|| (dwrq->length == 0 && !is_default)
|| (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY))
set_tx_key = 1;
@@ -2161,11 +1835,9 @@
goto out;
if (dwrq->flags & IW_ENCODE_RESTRICTED) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeshared;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY;
} else if (dwrq->flags & IW_ENCODE_OPEN) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
/* Mark the various WEP bits as modified */
@@ -2350,15 +2022,13 @@
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA) {
assoc_req->secinfo.WPAenabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.wep_enabled = 0;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA2) {
assoc_req->secinfo.WPA2enabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.wep_enabled = 0;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
updated = 1;
break;
@@ -2376,14 +2046,11 @@
case IW_AUTH_80211_AUTH_ALG:
if (dwrq->value & IW_AUTH_ALG_SHARED_KEY) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeshared;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY;
} else if (dwrq->value & IW_AUTH_ALG_OPEN_SYSTEM) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
} else if (dwrq->value & IW_AUTH_ALG_LEAP) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodenetworkEAP;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_LEAP;
} else {
ret = -EINVAL;
}
@@ -2396,9 +2063,8 @@
!assoc_req->secinfo.WPA2enabled) {
assoc_req->secinfo.WPAenabled = 1;
assoc_req->secinfo.WPA2enabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.wep_enabled = 0;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
} else {
assoc_req->secinfo.WPAenabled = 0;
@@ -2455,19 +2121,7 @@
break;
case IW_AUTH_80211_AUTH_ALG:
- switch (adapter->secinfo.authmode) {
- case wlan802_11authmodeshared:
- dwrq->value = IW_AUTH_ALG_SHARED_KEY;
- break;
- case wlan802_11authmodeopen:
- dwrq->value = IW_AUTH_ALG_OPEN_SYSTEM;
- break;
- case wlan802_11authmodenetworkEAP:
- dwrq->value = IW_AUTH_ALG_LEAP;
- break;
- default:
- break;
- }
+ dwrq->value = adapter->secinfo.auth_mode;
break;
case IW_AUTH_WPA_ENABLED:
diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
index 39f367c3..15cfaaf 100644
--- a/drivers/net/wireless/libertas/wext.h
+++ b/drivers/net/wireless/libertas/wext.h
@@ -10,88 +10,22 @@
/** PRIVATE CMD ID */
#define WLANIOCTL SIOCIWFIRSTPRIV
-#define WLANSETWPAIE (WLANIOCTL + 0)
-
-#define WLAN_SETINT_GETINT (WLANIOCTL + 7)
-#define WLANNF 1
-#define WLANRSSI 2
-#define WLANENABLE11D 5
-#define WLANADHOCGRATE 6
-#define WLAN_SUBCMD_SET_PRESCAN 11
-
#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8)
-#define WLANDEAUTH 1
-#define WLANRADIOON 2
-#define WLANRADIOOFF 3
-#define WLANREMOVEADHOCAES 4
-#define WLANADHOCSTOP 5
-#define WLANCIPHERTEST 6
-#define WLANCRYPTOTEST 7
-
-#define WLANWLANIDLEON 10
-#define WLANWLANIDLEOFF 11
#define WLAN_SUBCMD_BT_RESET 13
#define WLAN_SUBCMD_FWT_RESET 14
-#define WLANGETLOG (WLANIOCTL + 9)
-#define GETLOG_BUFSIZE 300
-
-#define WLANSCAN_TYPE (WLANIOCTL + 11)
-
#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15)
#define WLANGETREGION 1
-#define WLAN_GET_LISTEN_INTERVAL 2
-#define WLAN_GET_MULTIPLE_DTIM 3
-#define WLAN_GET_TX_RATE 4
-#define WLANGETBCNAVG 5
-#define WLAN_GET_LINKMODE 6
-#define WLAN_GET_RADIOMODE 7
-#define WLAN_GET_DEBUGMODE 8
#define WLAN_SUBCMD_FWT_CLEANUP 15
#define WLAN_SUBCMD_FWT_TIME 16
#define WLAN_SUBCMD_MESH_GET_TTL 17
-#define WLANREGCFRDWR (WLANIOCTL + 18)
-
-#define WLAN_SETNONE_GETTWELVE_CHAR (WLANIOCTL + 19)
-#define WLAN_SUBCMD_GETRXANTENNA 1
-#define WLAN_SUBCMD_GETTXANTENNA 2
-#define WLAN_GET_TSF 3
-
-#define WLAN_SETNONE_GETWORDCHAR (WLANIOCTL + 21)
-#define WLANGETADHOCAES 1
-
-#define WLAN_SETONEINT_GETONEINT (WLANIOCTL + 23)
-#define WLAN_BEACON_INTERVAL 1
-#define WLAN_LISTENINTRVL 4
-
-#define WLAN_TXCONTROL 6
-#define WLAN_NULLPKTINTERVAL 7
-
#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24)
-#define WLAN_SUBCMD_SETRXANTENNA 1
-#define WLAN_SUBCMD_SETTXANTENNA 2
-#define WLANSETAUTHALG 5
-#define WLANSET8021XAUTHALG 6
-#define WLANSETENCRYPTIONMODE 7
#define WLANSETREGION 8
-#define WLAN_SET_LISTEN_INTERVAL 9
-
-#define WLAN_SET_MULTIPLE_DTIM 10
-#define WLAN_SET_ATIM_WINDOW 11
-#define WLANSETBCNAVG 13
-#define WLANSETDATAAVG 14
-#define WLAN_SET_LINKMODE 15
-#define WLAN_SET_RADIOMODE 16
-#define WLAN_SET_DEBUGMODE 17
#define WLAN_SUBCMD_MESH_SET_TTL 18
#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25)
-#define WLANSCAN_MODE 6
-
-#define WLAN_GET_ADHOC_STATUS 9
-
#define WLAN_SUBCMD_BT_ADD 18
#define WLAN_SUBCMD_BT_DEL 19
#define WLAN_SUBCMD_BT_LIST 20
@@ -103,27 +37,8 @@
#define WLAN_SUBCMD_FWT_LIST_ROUTE 26
#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29)
-#define WLAN_TPCCFG 1
-#define WLAN_POWERCFG 2
-
-#define WLAN_AUTO_FREQ_SET 3
-#define WLAN_AUTO_FREQ_GET 4
#define WLAN_LED_GPIO_CTRL 5
-#define WLAN_SCANPROBES 6
-#define WLAN_ADAPT_RATESET 8
-#define WLAN_INACTIVITY_TIMEOUT 9
-#define WLANSNR 10
-#define WLAN_GET_RATE 11
-#define WLAN_GET_RXINFO 12
-#define WLANCMD52RDWR (WLANIOCTL + 30)
-#define WLANCMD53RDWR (WLANIOCTL + 31)
-#define CMD53BUFLEN 32
-
-#define REG_MAC 0x19
-#define REG_BBP 0x1a
-#define REG_RF 0x1b
-#define REG_EEPROM 0x59
#define WLAN_LINKMODE_802_3 0
#define WLAN_LINKMODE_802_11 2
#define WLAN_RADIOMODE_NONE 0
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 36c6a1b..f46c69e 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -6,6 +6,7 @@
#
menu "Parallel port support"
+ depends on HAS_IOMEM
config PARPORT
tristate "Parallel port support"
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 78cf071..ef07c36 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -249,19 +249,19 @@
if (rc == PCI_SLOT_ALREADY_UP) {
- dev_dbg(slot->pci_bus->self, "is already active\n");
+ dev_dbg(&slot->pci_bus->self->dev, "is already active\n");
return 1; /* return 1 to user */
}
if (rc == PCI_L1_ERR) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message: %s",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if (rc) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"insert failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
@@ -287,25 +287,25 @@
if ((action == PCI_REQ_SLOT_ELIGIBLE) &&
(rc == PCI_SLOT_ALREADY_DOWN)) {
- dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n");
+ dev_dbg(&slot->pci_bus->self->dev, "Slot %s already inactive\n", slot->physical_path);
return 1; /* return 1 to user */
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"Cannot remove last 33MHz card\n");
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"L1 failure %d with message \n%s\n",
resp.resp_sub_errno, resp.resp_l1_msg);
return -EPERM;
}
if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"remove failed with error %d sub-error %d\n",
rc, resp.resp_sub_errno);
return -EIO;
@@ -317,12 +317,12 @@
if ((action == PCI_REQ_SLOT_DISABLE) && !rc) {
pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
- dev_dbg(slot->pci_bus->self, "remove successful\n");
+ dev_dbg(&slot->pci_bus->self->dev, "remove successful\n");
return 0;
}
if ((action == PCI_REQ_SLOT_DISABLE) && rc) {
- dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc);
+ dev_dbg(&slot->pci_bus->self->dev,"remove failed rc = %d\n", rc);
}
return rc;
@@ -375,7 +375,7 @@
num_funcs = pci_scan_slot(slot->pci_bus,
PCI_DEVFN(slot->device_num + 1, 0));
if (!num_funcs) {
- dev_dbg(slot->pci_bus->self, "no device in slot\n");
+ dev_dbg(&slot->pci_bus->self->dev, "no device in slot\n");
mutex_unlock(&sn_hotplug_mutex);
return -ENODEV;
}
@@ -427,7 +427,7 @@
phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
if (acpi_bus_get_device(phandle, &pdevice)) {
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"no parent device, assuming NULL\n");
pdevice = NULL;
}
@@ -479,10 +479,10 @@
mutex_unlock(&sn_hotplug_mutex);
if (rc == 0)
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"insert operation successful\n");
else
- dev_dbg(slot->pci_bus->self,
+ dev_dbg(&slot->pci_bus->self->dev,
"insert operation failed rc = %d\n", rc);
return rc;
@@ -659,16 +659,16 @@
if (rc)
goto register_err;
}
- dev_dbg(pci_bus->self, "Registered bus with hotplug\n");
+ dev_dbg(&pci_bus->self->dev, "Registered bus with hotplug\n");
return rc;
register_err:
- dev_dbg(pci_bus->self, "bus failed to register with err = %d\n",
+ dev_dbg(&pci_bus->self->dev, "bus failed to register with err = %d\n",
rc);
alloc_err:
if (rc == -ENOMEM)
- dev_dbg(pci_bus->self, "Memory allocation error\n");
+ dev_dbg(&pci_bus->self->dev, "Memory allocation error\n");
/* destroy THIS element */
if (bss_hotplug_slot)
@@ -701,10 +701,10 @@
rc = sn_pci_bus_valid(pci_bus);
if (rc != 1) {
- dev_dbg(pci_bus->self, "not a valid hotplug bus\n");
+ dev_dbg(&pci_bus->self->dev, "not a valid hotplug bus\n");
continue;
}
- dev_dbg(pci_bus->self, "valid hotplug bus\n");
+ dev_dbg(&pci_bus->self->dev, "valid hotplug bus\n");
rc = sn_hotplug_slot_register(pci_bus);
if (!rc) {
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index e6740d1..d9cbd58 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -549,8 +549,10 @@
{
struct msi_desc *entry, *tmp;
- list_for_each_entry(entry, &dev->msi_list, list)
- BUG_ON(irq_has_action(entry->irq));
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ if (entry->irq)
+ BUG_ON(irq_has_action(entry->irq));
+ }
arch_teardown_msi_irqs(dev);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 147d86f..6ccc2e9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -875,6 +875,7 @@
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_sb600_sata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_sb600_sata);
/*
* Serverworks CSB5 IDE does not fully support native mode
diff --git a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig
index c514320..1959cef 100644
--- a/drivers/pnp/Kconfig
+++ b/drivers/pnp/Kconfig
@@ -3,6 +3,7 @@
#
menu "Plug and Play support"
+ depends on HAS_IOMEM
config PNP
bool "Plug and Play support"
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 76422ed..95ce8f4 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -3,6 +3,7 @@
#
menu "Real Time Clock"
+ depends on !S390
config RTC_LIB
tristate
@@ -245,7 +246,7 @@
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
depends on RTC_CLASS && (X86 || ALPHA || ARM26 || ARM \
- || M32R || ATARI || POWERPC)
+ || M32R || ATARI || POWERPC || MIPS)
help
Say "yes" here to get direct support for the real time clock
found in every PC or ACPI-based system, and some other boards.
@@ -396,7 +397,7 @@
config RTC_DRV_RS5C313
tristate "Ricoh RS5C313"
- depends on RTC_CLASS && BROKEN
+ depends on RTC_CLASS && SH_LANDISK
help
If you say yes here you get support for the Ricoh RS5C313 RTC chips.
diff --git a/drivers/rtc/rtc-rs5c313.c b/drivers/rtc/rtc-rs5c313.c
index 9d6de37..66eb133 100644
--- a/drivers/rtc/rtc-rs5c313.c
+++ b/drivers/rtc/rtc-rs5c313.c
@@ -126,7 +126,7 @@
static unsigned char rs5c313_read_data(void)
{
int i;
- unsigned char data;
+ unsigned char data = 0;
for (i = 0; i < 8; i++) {
ndelay(700);
@@ -194,7 +194,7 @@
return;
}
-static inline unsigned char rs5c313_read_cntreg(unsigned char addr)
+static inline unsigned char rs5c313_read_cntreg(void)
{
return rs5c313_read_reg(RS5C313_ADDR_CNTREG);
}
@@ -212,7 +212,9 @@
static int rs5c313_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
int data;
+ int cnt;
+ cnt = 0;
while (1) {
RS5C313_CEENABLE; /* CE:H */
@@ -225,6 +227,10 @@
RS5C313_CEDISABLE;
ndelay(700); /* CE:L */
+ if (cnt++ > 100) {
+ dev_err(dev, "%s: timeout error\n", __FUNCTION__);
+ return -EIO;
+ }
}
data = rs5c313_read_reg(RS5C313_ADDR_SEC);
@@ -266,7 +272,9 @@
static int rs5c313_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
int data;
+ int cnt;
+ cnt = 0;
/* busy check. */
while (1) {
RS5C313_CEENABLE; /* CE:H */
@@ -279,6 +287,11 @@
RS5C313_MISCOP;
RS5C313_CEDISABLE;
ndelay(700); /* CE:L */
+
+ if (cnt++ > 100) {
+ dev_err(dev, "%s: timeout error\n", __FUNCTION__);
+ return -EIO;
+ }
}
data = BIN2BCD(tm->tm_sec);
@@ -317,6 +330,7 @@
static void rs5c313_check_xstp_bit(void)
{
struct rtc_time tm;
+ int cnt;
RS5C313_CEENABLE; /* CE:H */
if (rs5c313_read_cntreg() & RS5C313_CNTREG_WTEN_XSTP) {
@@ -326,12 +340,16 @@
rs5c313_write_cntreg(0x07);
/* busy check. */
- while (rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY)
+ for (cnt = 0; cnt < 100; cnt++) {
+ if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY))
+ break;
RS5C313_MISCOP;
+ }
memset(&tm, 0, sizeof(struct rtc_time));
tm.tm_mday = 1;
- tm.tm_mon = 1;
+ tm.tm_mon = 1 - 1;
+ tm.tm_year = 2000 - 1900;
rs5c313_rtc_set_time(NULL, &tm);
printk(KERN_ERR "RICHO RS5C313: invalid value, resetting to "
@@ -356,7 +374,7 @@
platform_set_drvdata(pdev, rtc);
- return err;
+ return 0;
}
static int __devexit rs5c313_rtc_remove(struct platform_device *pdev)
diff --git a/drivers/s390/Kconfig b/drivers/s390/Kconfig
deleted file mode 100644
index 165af39..0000000
--- a/drivers/s390/Kconfig
+++ /dev/null
@@ -1,239 +0,0 @@
-config CCW
- bool
- default y
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-
-menu "Character device drivers"
-
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- The entries in /dev/pts/ are created on the fly by a virtual
- file system; therefore, if you say Y here you should say Y to
- "/dev/pts file system for Unix98 PTYs" as well.
-
- If you want to say Y here, you need to have the C library glibc 2.1
- or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
- Read the instructions in <file:Documentation/Changes> pertaining to
- pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
- int "Maximum number of Unix98 PTYs in use (0-2048)"
- depends on UNIX98_PTYS
- default "256"
- help
- The maximum number of Unix98 PTYs that can be used at any one time.
- The default is 256, and should be enough for desktop systems. Server
- machines which support incoming telnet/rlogin/ssh connections and/or
- serve several X terminals may want to increase this: every incoming
- connection and every xterm uses up one PTY.
-
- When not in use, each additional set of 256 PTYs occupy
- approximately 8 KB of kernel memory on 32-bit architectures.
-
-config HANGCHECK_TIMER
- tristate "Hangcheck timer"
- help
- The hangcheck-timer module detects when the system has gone
- out to lunch past a certain margin. It can reboot the system
- or merely print a warning.
-
-source "drivers/char/watchdog/Kconfig"
-
-comment "S/390 character device drivers"
-
-config TN3270
- tristate "Support for locally attached 3270 terminals"
- help
- Include support for IBM 3270 terminals.
-
-config TN3270_TTY
- tristate "Support for tty input/output on 3270 terminals"
- depends on TN3270
- help
- Include support for using an IBM 3270 terminal as a Linux tty.
-
-config TN3270_FS
- tristate "Support for fullscreen applications on 3270 terminals"
- depends on TN3270
- help
- Include support for fullscreen applications on an IBM 3270 terminal.
-
-config TN3270_CONSOLE
- bool "Support for console on 3270 terminal"
- depends on TN3270=y && TN3270_TTY=y
- help
- Include support for using an IBM 3270 terminal as a Linux system
- console. Available only if 3270 support is compiled in statically.
-
-config TN3215
- bool "Support for 3215 line mode terminal"
- help
- Include support for IBM 3215 line-mode terminals.
-
-config TN3215_CONSOLE
- bool "Support for console on 3215 line mode terminal"
- depends on TN3215
- help
- Include support for using an IBM 3215 line-mode terminal as a
- Linux system console.
-
-config CCW_CONSOLE
- bool
- depends on TN3215_CONSOLE || TN3270_CONSOLE
- default y
-
-config SCLP_TTY
- bool "Support for SCLP line mode terminal"
- help
- Include support for IBM SCLP line-mode terminals.
-
-config SCLP_CONSOLE
- bool "Support for console on SCLP line mode terminal"
- depends on SCLP_TTY
- help
- Include support for using an IBM HWC line-mode terminal as the Linux
- system console.
-
-config SCLP_VT220_TTY
- bool "Support for SCLP VT220-compatible terminal"
- help
- Include support for an IBM SCLP VT220-compatible terminal.
-
-config SCLP_VT220_CONSOLE
- bool "Support for console on SCLP VT220-compatible terminal"
- depends on SCLP_VT220_TTY
- help
- Include support for using an IBM SCLP VT220-compatible terminal as a
- Linux system console.
-
-config SCLP_CPI
- tristate "Control-Program Identification"
- help
- This option enables the hardware console interface for system
- identification. This is commonly used for workload management and
- gives you a nice name for the system on the service element.
- Please select this option as a module since built-in operation is
- completely untested.
- You should only select this option if you know what you are doing,
- need this feature and intend to run your kernel in LPAR.
-
-config S390_TAPE
- tristate "S/390 tape device support"
- help
- Select this option if you want to access channel-attached tape
- devices on IBM S/390 or zSeries.
- If you select this option you will also want to select at
- least one of the tape interface options and one of the tape
- hardware options in order to access a tape device.
- This option is also available as a module. The module will be
- called tape390 and include all selected interfaces and
- hardware drivers.
-
-comment "S/390 tape interface support"
- depends on S390_TAPE
-
-config S390_TAPE_BLOCK
- bool "Support for tape block devices"
- depends on S390_TAPE
- help
- Select this option if you want to access your channel-attached tape
- devices using the block device interface. This interface is similar
- to CD-ROM devices on other platforms. The tapes can only be
- accessed read-only when using this interface. Have a look at
- <file:Documentation/s390/TAPE> for further information about creating
- volumes for and using this interface. It is safe to say "Y" here.
-
-comment "S/390 tape hardware support"
- depends on S390_TAPE
-
-config S390_TAPE_34XX
- tristate "Support for 3480/3490 tape hardware"
- depends on S390_TAPE
- help
- Select this option if you want to access IBM 3480/3490 magnetic
- tape subsystems and 100% compatibles.
- It is safe to say "Y" here.
-
-config S390_TAPE_3590
- tristate "Support for 3590 tape hardware"
- depends on S390_TAPE
- help
- Select this option if you want to access IBM 3590 magnetic
- tape subsystems and 100% compatibles.
- It is safe to say "Y" here.
-
-config VMLOGRDR
- tristate "Support for the z/VM recording system services (VM only)"
- depends on IUCV
- help
- Select this option if you want to be able to receive records collected
- by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
- *SYMPTOM.
- This driver depends on the IUCV support driver.
-
-config VMCP
- tristate "Support for the z/VM CP interface (VM only)"
- help
- Select this option if you want to be able to interact with the control
- program on z/VM
-
-
-config MONREADER
- tristate "API for reading z/VM monitor service records"
- depends on IUCV
- help
- Character device driver for reading z/VM monitor service records
-
-config MONWRITER
- tristate "API for writing z/VM monitor service records"
- default "m"
- help
- Character device driver for writing z/VM monitor service records
-
-endmenu
-
-menu "Cryptographic devices"
-
-config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- select ZCRYPT_MONOLITHIC if ZCRYPT="y"
- default "m"
- help
- Select this option if you want to use a PCI-attached cryptographic
- adapter like:
- + PCI Cryptographic Accelerator (PCICA)
- + PCI Cryptographic Coprocessor (PCICC)
- + PCI-X Cryptographic Coprocessor (PCIXCC)
- + Crypto Express2 Coprocessor (CEX2C)
- + Crypto Express2 Accelerator (CEX2A)
-
-config ZCRYPT_MONOLITHIC
- bool "Monolithic zcrypt module"
- depends on ZCRYPT="m"
- help
- Select this option if you want to have a single module z90crypt.ko
- that contains all parts of the crypto device driver (ap bus,
- request router and all the card drivers).
-
-endmenu
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index b250c53..e879b21 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -1,11 +1,9 @@
-if S390 && BLOCK
-
comment "S/390 block device drivers"
- depends on S390
+ depends on S390 && BLOCK
config BLK_DEV_XPRAM
tristate "XPRAM disk support"
- depends on S390
+ depends on S390 && BLOCK
help
Select this option if you want to use your expanded storage on S/390
or zSeries as a disk. This is useful as a _fast_ swap device if you
@@ -15,12 +13,13 @@
config DCSSBLK
tristate "DCSSBLK support"
+ depends on S390 && BLOCK
help
Support for dcss block device
config DASD
tristate "Support for DASD devices"
- depends on CCW
+ depends on CCW && BLOCK
help
Enable this option if you want to access DASDs directly utilizing
S/390s channel subsystem commands. This is necessary for running
@@ -62,5 +61,3 @@
This driver provides a character device interface to the
DASD extended error reporting. This is only needed if you want to
use applications written for the EER facility.
-
-endif
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 9775210..bfeca57 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2174,9 +2174,10 @@
return ret;
}
-struct dasd_ccw_req * dasd_generic_build_rdc(struct dasd_device *device,
- void *rdc_buffer,
- int rdc_buffer_size, char *magic)
+static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device,
+ void *rdc_buffer,
+ int rdc_buffer_size,
+ char *magic)
{
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
@@ -2219,6 +2220,7 @@
dasd_sfree_request(cqr, cqr->device);
return ret;
}
+EXPORT_SYMBOL_GPL(dasd_generic_read_dev_chars);
static int __init
dasd_init(void)
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index e810e4a..eccac1c 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -50,6 +50,7 @@
struct dasd_diag_rw_io iob;
struct dasd_diag_init_io iib;
blocknum_t pt_block;
+ struct ccw_dev_id dev_id;
};
struct dasd_diag_req {
@@ -102,7 +103,7 @@
iib = &private->iib;
memset(iib, 0, sizeof (struct dasd_diag_init_io));
- iib->dev_nr = _ccw_device_get_device_number(device->cdev);
+ iib->dev_nr = private->dev_id.devno;
iib->block_size = blocksize;
iib->offset = offset;
iib->flaga = DASD_DIAG_FLAGA_DEFAULT;
@@ -127,7 +128,7 @@
private = (struct dasd_diag_private *) device->private;
iib = &private->iib;
memset(iib, 0, sizeof (struct dasd_diag_init_io));
- iib->dev_nr = _ccw_device_get_device_number(device->cdev);
+ iib->dev_nr = private->dev_id.devno;
rc = dia250(iib, TERM_BIO);
return rc;
}
@@ -166,7 +167,7 @@
private = (struct dasd_diag_private *) device->private;
dreq = (struct dasd_diag_req *) cqr->data;
- private->iob.dev_nr = _ccw_device_get_device_number(device->cdev);
+ private->iob.dev_nr = private->dev_id.devno;
private->iob.key = 0;
private->iob.flags = DASD_DIAG_RWFLAG_ASYNC;
private->iob.block_count = dreq->block_count;
@@ -323,11 +324,12 @@
"memory allocation failed for private data");
return -ENOMEM;
}
+ ccw_device_get_id(device->cdev, &private->dev_id);
device->private = (void *) private;
}
/* Read Device Characteristics */
rdc_data = (void *) &(private->rdc_data);
- rdc_data->dev_nr = _ccw_device_get_device_number(device->cdev);
+ rdc_data->dev_nr = private->dev_id.devno;
rdc_data->rdc_len = sizeof (struct dasd_diag_characteristics);
rc = diag210((struct diag210 *) rdc_data);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index c9583fb..418b4e6 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -450,9 +450,9 @@
return 0;
}
-struct dasd_ccw_req * dasd_eckd_build_rcd_lpm(struct dasd_device *device,
- void *rcd_buffer,
- struct ciw *ciw, __u8 lpm)
+static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device,
+ void *rcd_buffer,
+ struct ciw *ciw, __u8 lpm)
{
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 758cfb5..672eb0a 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -255,6 +255,7 @@
unsigned long flags;
int rc;
struct ccw_device *cdev;
+ struct ccw_dev_id dev_id;
if (!device->discipline->fill_info)
return -EINVAL;
@@ -270,8 +271,9 @@
}
cdev = device->cdev;
+ ccw_device_get_id(cdev, &dev_id);
- dasd_info->devno = _ccw_device_get_device_number(device->cdev);
+ dasd_info->devno = dev_id.devno;
dasd_info->schid = _ccw_device_get_subchannel_number(device->cdev);
dasd_info->cu_type = cdev->id.cu_type;
dasd_info->cu_model = cdev->id.cu_model;
diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig
new file mode 100644
index 0000000..66102a1
--- /dev/null
+++ b/drivers/s390/char/Kconfig
@@ -0,0 +1,166 @@
+comment "S/390 character device drivers"
+ depends on S390
+
+config TN3270
+ tristate "Support for locally attached 3270 terminals"
+ depends on CCW
+ help
+ Include support for IBM 3270 terminals.
+
+config TN3270_TTY
+ tristate "Support for tty input/output on 3270 terminals"
+ depends on TN3270
+ help
+ Include support for using an IBM 3270 terminal as a Linux tty.
+
+config TN3270_FS
+ tristate "Support for fullscreen applications on 3270 terminals"
+ depends on TN3270
+ help
+ Include support for fullscreen applications on an IBM 3270 terminal.
+
+config TN3270_CONSOLE
+ bool "Support for console on 3270 terminal"
+ depends on TN3270=y && TN3270_TTY=y
+ help
+ Include support for using an IBM 3270 terminal as a Linux system
+ console. Available only if 3270 support is compiled in statically.
+
+config TN3215
+ bool "Support for 3215 line mode terminal"
+ depends on CCW
+ help
+ Include support for IBM 3215 line-mode terminals.
+
+config TN3215_CONSOLE
+ bool "Support for console on 3215 line mode terminal"
+ depends on TN3215
+ help
+ Include support for using an IBM 3215 line-mode terminal as a
+ Linux system console.
+
+config CCW_CONSOLE
+ bool
+ depends on TN3215_CONSOLE || TN3270_CONSOLE
+ default y
+
+config SCLP
+ bool "Support for SCLP"
+ depends on S390
+ help
+ Include support for the SCLP interface to the service element.
+
+config SCLP_TTY
+ bool "Support for SCLP line mode terminal"
+ depends on SCLP
+ help
+ Include support for IBM SCLP line-mode terminals.
+
+config SCLP_CONSOLE
+ bool "Support for console on SCLP line mode terminal"
+ depends on SCLP_TTY
+ help
+ Include support for using an IBM HWC line-mode terminal as the Linux
+ system console.
+
+config SCLP_VT220_TTY
+ bool "Support for SCLP VT220-compatible terminal"
+ depends on SCLP
+ help
+ Include support for an IBM SCLP VT220-compatible terminal.
+
+config SCLP_VT220_CONSOLE
+ bool "Support for console on SCLP VT220-compatible terminal"
+ depends on SCLP_VT220_TTY
+ help
+ Include support for using an IBM SCLP VT220-compatible terminal as a
+ Linux system console.
+
+config SCLP_CPI
+ tristate "Control-Program Identification"
+ depends on SCLP
+ help
+ This option enables the hardware console interface for system
+ identification. This is commonly used for workload management and
+ gives you a nice name for the system on the service element.
+ Please select this option as a module since built-in operation is
+ completely untested.
+ You should only select this option if you know what you are doing,
+ need this feature and intend to run your kernel in LPAR.
+
+config S390_TAPE
+ tristate "S/390 tape device support"
+ depends on CCW
+ help
+ Select this option if you want to access channel-attached tape
+ devices on IBM S/390 or zSeries.
+ If you select this option you will also want to select at
+ least one of the tape interface options and one of the tape
+ hardware options in order to access a tape device.
+ This option is also available as a module. The module will be
+ called tape390 and include all selected interfaces and
+ hardware drivers.
+
+comment "S/390 tape interface support"
+ depends on S390_TAPE
+
+config S390_TAPE_BLOCK
+ bool "Support for tape block devices"
+ depends on S390_TAPE
+ help
+ Select this option if you want to access your channel-attached tape
+ devices using the block device interface. This interface is similar
+ to CD-ROM devices on other platforms. The tapes can only be
+ accessed read-only when using this interface. Have a look at
+ <file:Documentation/s390/TAPE> for further information about creating
+ volumes for and using this interface. It is safe to say "Y" here.
+
+comment "S/390 tape hardware support"
+ depends on S390_TAPE
+
+config S390_TAPE_34XX
+ tristate "Support for 3480/3490 tape hardware"
+ depends on S390_TAPE
+ help
+ Select this option if you want to access IBM 3480/3490 magnetic
+ tape subsystems and 100% compatibles.
+ It is safe to say "Y" here.
+
+config S390_TAPE_3590
+ tristate "Support for 3590 tape hardware"
+ depends on S390_TAPE
+ help
+ Select this option if you want to access IBM 3590 magnetic
+ tape subsystems and 100% compatibles.
+ It is safe to say "Y" here.
+
+config VMLOGRDR
+ tristate "Support for the z/VM recording system services (VM only)"
+ depends on IUCV
+ help
+ Select this option if you want to be able to receive records collected
+ by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
+ *SYMPTOM.
+ This driver depends on the IUCV support driver.
+
+config VMCP
+ tristate "Support for the z/VM CP interface (VM only)"
+ depends on S390
+ help
+ Select this option if you want to be able to interact with the control
+ program on z/VM
+
+
+config MONREADER
+ tristate "API for reading z/VM monitor service records"
+ depends on IUCV
+ help
+ Character device driver for reading z/VM monitor service records
+
+config MONWRITER
+ tristate "API for writing z/VM monitor service records"
+ depends on S390
+ default "m"
+ help
+ Character device driver for writing z/VM monitor service records
+
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 8df7b13..67009bf 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -97,7 +97,7 @@
* Create the 8 bytes EBCDIC DCSS segment name from
* an ASCII name, incl. padding
*/
-static inline void dcss_mkname(char *ascii_name, char *ebcdic_name)
+static void dcss_mkname(char *ascii_name, char *ebcdic_name)
{
int i;
@@ -191,7 +191,7 @@
return *((u32 *) (mon_mca_start(monmsg) + monmsg->mca_offset + 8));
}
-static inline int mon_check_mca(struct mon_msg *monmsg)
+static int mon_check_mca(struct mon_msg *monmsg)
{
if ((mon_rec_end(monmsg) <= mon_rec_start(monmsg)) ||
(mon_rec_start(monmsg) < mon_dcss_start) ||
@@ -209,8 +209,8 @@
return 0;
}
-static inline int mon_send_reply(struct mon_msg *monmsg,
- struct mon_private *monpriv)
+static int mon_send_reply(struct mon_msg *monmsg,
+ struct mon_private *monpriv)
{
int rc;
@@ -236,7 +236,7 @@
return 0;
}
-static inline void mon_free_mem(struct mon_private *monpriv)
+static void mon_free_mem(struct mon_private *monpriv)
{
int i;
@@ -246,7 +246,7 @@
kfree(monpriv);
}
-static inline struct mon_private *mon_alloc_mem(void)
+static struct mon_private *mon_alloc_mem(void)
{
int i;
struct mon_private *monpriv;
@@ -307,7 +307,7 @@
monmsg->pos = 0;
}
-static inline struct mon_msg *mon_next_message(struct mon_private *monpriv)
+static struct mon_msg *mon_next_message(struct mon_private *monpriv)
{
struct mon_msg *monmsg;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 8facd14..f6ef90e 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -589,9 +589,10 @@
__raw3270_size_device_vm(struct raw3270 *rp)
{
int rc, model;
+ struct ccw_dev_id dev_id;
- raw3270_init_diag210.vrdcdvno =
- _ccw_device_get_device_number(rp->cdev);
+ ccw_device_get_id(rp->cdev, &dev_id);
+ raw3270_init_diag210.vrdcdvno = dev_id.devno;
raw3270_init_diag210.vrdclen = sizeof(struct diag210);
rc = diag210(&raw3270_init_diag210);
if (rc)
diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h
index 87ac4a3..dbb99d1 100644
--- a/drivers/s390/char/sclp.h
+++ b/drivers/s390/char/sclp.h
@@ -132,6 +132,9 @@
int sclp_reactivate(void);
int sclp_service_call(sclp_cmdw_t command, void *sccb);
+int sclp_sdias_init(void);
+void sclp_sdias_exit(void);
+
/* useful inlines */
/* VM uses EBCDIC 037, LPAR+native(SE+HMC) use EBCDIC 500 */
diff --git a/drivers/s390/char/sclp_sdias.c b/drivers/s390/char/sclp_sdias.c
index 52283da..1c06497 100644
--- a/drivers/s390/char/sclp_sdias.c
+++ b/drivers/s390/char/sclp_sdias.c
@@ -66,9 +66,9 @@
static void sdias_callback(struct sclp_req *request, void *data)
{
- struct sdias_sccb *sccb;
+ struct sdias_sccb *cbsccb;
- sccb = (struct sdias_sccb *) request->sccb;
+ cbsccb = (struct sdias_sccb *) request->sccb;
sclp_req_done = 1;
wake_up(&sdias_wq); /* Inform caller, that request is complete */
TRACE("callback done\n");
@@ -229,7 +229,7 @@
return rc;
}
-int __init sdias_init(void)
+int __init sclp_sdias_init(void)
{
int rc;
@@ -248,7 +248,7 @@
return 0;
}
-void __exit sdias_exit(void)
+void __exit sclp_sdias_exit(void)
{
debug_unregister(sdias_dbf);
sclp_unregister(&sclp_sdias_register);
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 89d43931..66eb068 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -21,6 +21,7 @@
#include <asm/debug.h>
#include <asm/processor.h>
#include <asm/irqflags.h>
+#include "sclp.h"
#define TRACE(x...) debug_sprintf_event(zcore_dbf, 1, x)
#define MSG(x...) printk( KERN_ALERT x )
@@ -564,8 +565,6 @@
get_cpu_id(&hdr->cpu_id);
}
-extern int sdias_init(void);
-
static int __init zcore_init(void)
{
unsigned char arch;
@@ -582,7 +581,7 @@
TRACE("wwpn: %llx\n", (unsigned long long) ipl_info.data.fcp.wwpn);
TRACE("lun: %llx\n", (unsigned long long) ipl_info.data.fcp.lun);
- rc = sdias_init();
+ rc = sclp_sdias_init();
if (rc)
goto fail;
@@ -634,12 +633,10 @@
return rc;
}
-extern void sdias_exit(void);
-
static void __exit zcore_exit(void)
{
debug_unregister(zcore_dbf);
- sdias_exit();
+ sclp_sdias_exit();
diag308(DIAG308_REL_HSA, NULL);
}
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 27c6d9e..dfca0ef 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -191,8 +191,7 @@
return ret;
}
-int
-css_probe_device(struct subchannel_id schid)
+static int css_probe_device(struct subchannel_id schid)
{
int ret;
struct subchannel *sch;
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 71fcfdc..ed79775 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -138,9 +138,7 @@
* all css_drivers have the css_bus_type
*/
extern struct bus_type css_bus_type;
-extern struct css_driver io_subchannel_driver;
-extern int css_probe_device(struct subchannel_id);
extern int css_sch_device_register(struct subchannel *);
extern void css_sch_device_unregister(struct subchannel *);
extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index a23ff58..a8b373f 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -129,7 +129,7 @@
static void io_subchannel_ioterm(struct device *);
static void io_subchannel_shutdown(struct subchannel *);
-struct css_driver io_subchannel_driver = {
+static struct css_driver io_subchannel_driver = {
.subchannel_type = SUBCHANNEL_TYPE_IO,
.drv = {
.name = "io_subchannel",
@@ -546,7 +546,7 @@
.attrs = ccwdev_attrs,
};
-struct attribute_group *ccwdev_attr_groups[] = {
+static struct attribute_group *ccwdev_attr_groups[] = {
&ccwdev_attr_group,
NULL,
};
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 16f59fc..a5d263f 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -616,6 +616,17 @@
return chp_get_chp_desc(chpid);
}
+/**
+ * ccw_device_get_id - obtain a ccw device id
+ * @cdev: device to obtain the id for
+ * @dev_id: where to fill in the values
+ */
+void ccw_device_get_id(struct ccw_device *cdev, struct ccw_dev_id *dev_id)
+{
+ *dev_id = cdev->private->dev_id;
+}
+EXPORT_SYMBOL(ccw_device_get_id);
+
// FIXME: these have to go:
int
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index f770018..e70aeb7 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -1983,6 +1983,7 @@
if (q->is_input_q&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT)
qdio_mark_q(q);
else {
+ qdio_perf_stat_dec(&perf_stats.tl_runs);
__qdio_inbound_processing(q);
}
}
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index f98fa46..eada69d 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -3,7 +3,7 @@
config LCS
tristate "Lan Channel Station Interface"
- depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
+ depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM S/390
or zSeries. This device driver supports Token Ring (IEEE 802.5),
@@ -13,7 +13,7 @@
config CTC
tristate "CTC device support"
- depends on NETDEVICES
+ depends on CCW && NETDEVICES
help
Select this option if you want to use channel-to-channel networking
on IBM S/390 or zSeries. This device driver supports real CTC
@@ -42,7 +42,7 @@
config CLAW
tristate "CLAW device support"
- depends on NETDEVICES
+ depends on CCW && NETDEVICES
help
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
@@ -52,7 +52,7 @@
config QETH
tristate "Gigabit Ethernet device support"
- depends on NETDEVICES && IP_MULTICAST && QDIO
+ depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
help
This driver supports the IBM S/390 and zSeries OSA Express adapters
in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c
index f54fdfd..f29a4bc 100644
--- a/drivers/s390/net/qeth_mpc.c
+++ b/drivers/s390/net/qeth_mpc.c
@@ -162,7 +162,7 @@
char *msg;
};
-struct ipa_rc_msg qeth_ipa_rc_msg[] = {
+static struct ipa_rc_msg qeth_ipa_rc_msg[] = {
{IPA_RC_SUCCESS, "success"},
{IPA_RC_NOTSUPP, "Command not supported"},
{IPA_RC_IP_TABLE_FULL, "Add Addr IP Table Full - ipv6"},
@@ -226,7 +226,7 @@
char *name;
};
-struct ipa_cmd_names qeth_ipa_cmd_names[] = {
+static struct ipa_cmd_names qeth_ipa_cmd_names[] = {
{IPA_CMD_STARTLAN, "startlan"},
{IPA_CMD_STOPLAN, "stoplan"},
{IPA_CMD_SETVMAC, "setvmac"},
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 324899c..ddff40c 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -607,8 +607,7 @@
* @sg_count: elements in array
* Return: size of entire scatter-gather list
*/
-size_t
-zfcp_sg_size(struct scatterlist *sg, unsigned int sg_count)
+static size_t zfcp_sg_size(struct scatterlist *sg, unsigned int sg_count)
{
unsigned int i;
struct scatterlist *p;
@@ -975,8 +974,7 @@
mempool_destroy(adapter->pool.data_gid_pn);
}
-void
-zfcp_dummy_release(struct device *dev)
+static void zfcp_dummy_release(struct device *dev)
{
return;
}
@@ -1336,7 +1334,7 @@
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_FC
-void
+static void
zfcp_fsf_incoming_els_rscn(struct zfcp_adapter *adapter,
struct fsf_status_read_buffer *status_buffer)
{
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index d8191d1..5f32124 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -478,7 +478,7 @@
NULL
};
-void
+static void
_zfcp_san_dbf_event_common_ct(const char *tag, struct zfcp_fsf_req *fsf_req,
u32 s_id, u32 d_id, void *buffer, int buflen)
{
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index 8410587..178155b 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -18,6 +18,7 @@
#include <asm/ebus.h>
#include <asm/spitfire.h>
#include <asm/bbc.h>
+#include <asm/io.h>
#include "bbc_i2c.h"
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 2d14a29..3279a1b 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -20,6 +20,7 @@
#include <asm/ebus.h> /* EBus device */
#include <asm/oplib.h> /* OpenProm Library */
#include <asm/uaccess.h> /* put_/get_user */
+#include <asm/io.h>
#include <asm/display7seg.h>
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index f2be2ea..8328aca 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -30,6 +30,7 @@
#include <asm/ebus.h>
#include <asm/uaccess.h>
#include <asm/envctrl.h>
+#include <asm/io.h>
#define ENVCTRL_MINOR 162
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index e62d23f..d28c14e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1757,6 +1757,14 @@
tristate "ESP Scsi Driver Core"
depends on SCSI
select SCSI_SPI_ATTRS
+ help
+ This is a core driver for NCR53c9x based scsi chipsets,
+ also known as "ESP" for Emulex Scsi Processor or
+ Enhanced Scsi Processor. This driver does not exist by
+ itself, there are front-end drivers which, when enabled,
+ select and enable this driver. One example is SCSI_SUNESP.
+ These front-end drivers provide probing, DMA, and register
+ access support for the core driver.
config SCSI_SUNESP
tristate "Sparc ESP Scsi Driver"
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 7e132c5..2836fe2 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -281,7 +281,6 @@
{
struct Scsi_Host *host;
struct arxescsi_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -289,9 +288,7 @@
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_MEMC);
- reslen = ecard_resource_len(ec, ECARD_RES_MEMC);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -300,7 +297,7 @@
host = scsi_host_alloc(&arxescsi_template, sizeof(struct arxescsi_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
info = (struct arxescsi_info *)host->hostdata;
@@ -337,8 +334,6 @@
fas216_release(host);
out_unregister:
scsi_host_put(host);
- out_unmap:
- iounmap(base);
out_region:
ecard_release_resources(ec);
out:
@@ -348,13 +343,10 @@
static void __devexit arxescsi_remove(struct expansion_card *ec)
{
struct Scsi_Host *host = ecard_get_drvdata(ec);
- struct arxescsi_info *info = (struct arxescsi_info *)host->hostdata;
ecard_set_drvdata(ec, NULL);
fas216_remove(host);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 82add77..68a6412 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -401,7 +401,6 @@
{
struct Scsi_Host *host;
struct cumanascsi2_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -409,9 +408,7 @@
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_MEMC);
- reslen = ecard_resource_len(ec, ECARD_RES_MEMC);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -421,7 +418,7 @@
sizeof(struct cumanascsi2_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
ecard_set_drvdata(ec, host);
@@ -450,8 +447,8 @@
ec->irqaddr = info->base + CUMANASCSI2_STATUS;
ec->irqmask = STATUS_INT;
- ec->irq_data = info;
- ec->ops = &cumanascsi_2_ops;
+
+ ecard_setirq(ec, &cumanascsi_2_ops, info);
ret = fas216_init(host);
if (ret)
@@ -490,9 +487,6 @@
out_free:
scsi_host_put(host);
- out_unmap:
- iounmap(base);
-
out_region:
ecard_release_resources(ec);
@@ -512,8 +506,6 @@
free_dma(info->info.scsi.dma);
free_irq(ec->irq, info);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index ed06a8c..bb2477b 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -519,7 +519,6 @@
{
struct Scsi_Host *host;
struct eesoxscsi_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -527,9 +526,7 @@
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST);
- reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -539,7 +536,7 @@
sizeof(struct eesoxscsi_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
ecard_set_drvdata(ec, host);
@@ -569,8 +566,8 @@
ec->irqaddr = base + EESOX_DMASTAT;
ec->irqmask = EESOX_STAT_INTR;
- ec->irq_data = info;
- ec->ops = &eesoxscsi_ops;
+
+ ecard_setirq(ec, &eesoxscsi_ops, info);
device_create_file(&ec->dev, &dev_attr_bus_term);
@@ -612,9 +609,6 @@
device_remove_file(&ec->dev, &dev_attr_bus_term);
scsi_host_put(host);
- out_unmap:
- iounmap(base);
-
out_region:
ecard_release_resources(ec);
@@ -636,8 +630,6 @@
device_remove_file(&ec->dev, &dev_attr_bus_term);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index 159047a..d9a546d 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -313,7 +313,6 @@
{
struct Scsi_Host *host;
struct powertec_info *info;
- unsigned long resbase, reslen;
void __iomem *base;
int ret;
@@ -321,9 +320,7 @@
if (ret)
goto out;
- resbase = ecard_resource_start(ec, ECARD_RES_IOCFAST);
- reslen = ecard_resource_len(ec, ECARD_RES_IOCFAST);
- base = ioremap(resbase, reslen);
+ base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!base) {
ret = -ENOMEM;
goto out_region;
@@ -333,7 +330,7 @@
sizeof (struct powertec_info));
if (!host) {
ret = -ENOMEM;
- goto out_unmap;
+ goto out_region;
}
ecard_set_drvdata(ec, host);
@@ -361,8 +358,8 @@
ec->irqaddr = base + POWERTEC_INTR_STATUS;
ec->irqmask = POWERTEC_INTR_BIT;
- ec->irq_data = info;
- ec->ops = &powertecscsi_ops;
+
+ ecard_setirq(ec, &powertecscsi_ops, info);
device_create_file(&ec->dev, &dev_attr_bus_term);
@@ -404,9 +401,6 @@
device_remove_file(&ec->dev, &dev_attr_bus_term);
scsi_host_put(host);
- out_unmap:
- iounmap(base);
-
out_region:
ecard_release_resources(ec);
@@ -428,8 +422,6 @@
free_dma(info->info.scsi.dma);
free_irq(ec->irq, info);
- iounmap(info->base);
-
fas216_release(host);
scsi_host_put(host);
ecard_release_resources(ec);
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index a15752b..eef8275 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -6,87 +6,49 @@
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
* Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu)
* Copyright (C) 2001 Florian Lohoff (flo@rfc822.org)
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
*
* (In all truth, Jed Schimmel wrote all this code.)
*/
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
+
+#undef DEBUG
+
#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/spinlock.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sgialib.h>
-#include <asm/sgi/sgi.h>
-#include <asm/sgi/mc.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <asm/sgi/wd.h>
#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
-#include <linux/stat.h>
-
-#if 0
-#define DPRINTK(args...) printk(args)
-#else
-#define DPRINTK(args...)
-#endif
-
-#define HDATA(ptr) ((struct ip22_hostdata *)((ptr)->hostdata))
-
struct ip22_hostdata {
struct WD33C93_hostdata wh;
struct hpc_data {
dma_addr_t dma;
- void * cpu;
+ void *cpu;
} hd;
};
+#define host_to_hostdata(host) ((struct ip22_hostdata *)((host)->hostdata))
+
struct hpc_chunk {
struct hpc_dma_desc desc;
u32 _padding; /* align to quadword boundary */
};
-struct Scsi_Host *sgiwd93_host;
-struct Scsi_Host *sgiwd93_host1;
-
-/* Wuff wuff, wuff, wd33c93.c, wuff wuff, object oriented, bow wow. */
-static inline void write_wd33c93_count(const wd33c93_regs regs,
- unsigned long value)
-{
- *regs.SASR = WD_TRANSFER_COUNT_MSB;
- mb();
- *regs.SCMD = ((value >> 16) & 0xff);
- *regs.SCMD = ((value >> 8) & 0xff);
- *regs.SCMD = ((value >> 0) & 0xff);
- mb();
-}
-
-static inline unsigned long read_wd33c93_count(const wd33c93_regs regs)
-{
- unsigned long value;
-
- *regs.SASR = WD_TRANSFER_COUNT_MSB;
- mb();
- value = ((*regs.SCMD & 0xff) << 16);
- value |= ((*regs.SCMD & 0xff) << 8);
- value |= ((*regs.SCMD & 0xff) << 0);
- mb();
- return value;
-}
-
static irqreturn_t sgiwd93_intr(int irq, void *dev_id)
{
- struct Scsi_Host * host = (struct Scsi_Host *) dev_id;
+ struct Scsi_Host * host = dev_id;
unsigned long flags;
spin_lock_irqsave(host->host_lock, flags);
@@ -131,12 +93,12 @@
static int dma_setup(struct scsi_cmnd *cmd, int datainp)
{
- struct ip22_hostdata *hdata = HDATA(cmd->device->host);
+ struct ip22_hostdata *hdata = host_to_hostdata(cmd->device->host);
struct hpc3_scsiregs *hregs =
(struct hpc3_scsiregs *) cmd->device->host->base;
struct hpc_chunk *hcp = (struct hpc_chunk *) hdata->hd.cpu;
- DPRINTK("dma_setup: datainp<%d> hcp<%p> ", datainp, hcp);
+ pr_debug("dma_setup: datainp<%d> hcp<%p> ", datainp, hcp);
hdata->wh.dma_dir = datainp;
@@ -151,7 +113,7 @@
fill_hpc_entries(hcp, cmd, datainp);
- DPRINTK(" HPCGO\n");
+ pr_debug(" HPCGO\n");
/* Start up the HPC. */
hregs->ndptr = hdata->hd.dma;
@@ -166,7 +128,7 @@
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- struct ip22_hostdata *hdata = HDATA(instance);
+ struct ip22_hostdata *hdata = host_to_hostdata(instance);
struct hpc3_scsiregs *hregs;
if (!SCpnt)
@@ -174,7 +136,7 @@
hregs = (struct hpc3_scsiregs *) SCpnt->device->host->base;
- DPRINTK("dma_stop: status<%d> ", status);
+ pr_debug("dma_stop: status<%d> ", status);
/* First stop the HPC and flush it's FIFO. */
if (hdata->wh.dma_dir) {
@@ -186,7 +148,7 @@
dma_unmap_single(NULL, SCpnt->SCp.dma_handle, SCpnt->SCp.this_residual,
SCpnt->sc_data_direction);
- DPRINTK("\n");
+ pr_debug("\n");
}
void sgiwd93_reset(unsigned long base)
@@ -216,96 +178,6 @@
hcp->desc.pnext = hd->dma;
}
-static struct Scsi_Host * __init sgiwd93_setup_scsi(
- struct scsi_host_template *SGIblows, int unit, int irq,
- struct hpc3_scsiregs *hregs, unsigned char *wdregs)
-{
- struct ip22_hostdata *hdata;
- struct Scsi_Host *host;
- wd33c93_regs regs;
-
- host = scsi_register(SGIblows, sizeof(struct ip22_hostdata));
- if (!host)
- return NULL;
-
- host->base = (unsigned long) hregs;
- host->irq = irq;
-
- hdata = HDATA(host);
- hdata->hd.cpu = dma_alloc_coherent(NULL, PAGE_SIZE, &hdata->hd.dma,
- GFP_KERNEL);
- if (!hdata->hd.cpu) {
- printk(KERN_WARNING "sgiwd93: Could not allocate memory for "
- "host %d buffer.\n", unit);
- goto out_unregister;
- }
- init_hpc_chain(&hdata->hd);
-
- regs.SASR = wdregs + 3;
- regs.SCMD = wdregs + 7;
-
- wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_MHZ(20));
-
- if (hdata->wh.no_sync == 0xff)
- hdata->wh.no_sync = 0;
-
- if (request_irq(irq, sgiwd93_intr, 0, "SGI WD93", (void *) host)) {
- printk(KERN_WARNING "sgiwd93: Could not register irq %d "
- "for host %d.\n", irq, unit);
- goto out_free;
- }
- return host;
-
-out_free:
- dma_free_coherent(NULL, PAGE_SIZE, hdata->hd.cpu, hdata->hd.dma);
- wd33c93_release();
-
-out_unregister:
- scsi_unregister(host);
-
- return NULL;
-}
-
-static int __init sgiwd93_detect(struct scsi_host_template *SGIblows)
-{
- int found = 0;
-
- SGIblows->proc_name = "SGIWD93";
- sgiwd93_host = sgiwd93_setup_scsi(SGIblows, 0, SGI_WD93_0_IRQ,
- &hpc3c0->scsi_chan0,
- (unsigned char *)hpc3c0->scsi0_ext);
- if (sgiwd93_host)
- found++;
-
- /* Set up second controller on the Indigo2 */
- if (ip22_is_fullhouse()) {
- sgiwd93_host1 = sgiwd93_setup_scsi(SGIblows, 1, SGI_WD93_1_IRQ,
- &hpc3c0->scsi_chan1,
- (unsigned char *)hpc3c0->scsi1_ext);
- if (sgiwd93_host1)
- found++;
- }
-
- return found;
-}
-
-static int sgiwd93_release(struct Scsi_Host *instance)
-{
- struct ip22_hostdata *hdata = HDATA(instance);
- int irq = 0;
-
- if (sgiwd93_host && sgiwd93_host == instance)
- irq = SGI_WD93_0_IRQ;
- else if (sgiwd93_host1 && sgiwd93_host1 == instance)
- irq = SGI_WD93_1_IRQ;
-
- free_irq(irq, sgiwd93_intr);
- dma_free_coherent(NULL, PAGE_SIZE, hdata->hd.cpu, hdata->hd.dma);
- wd33c93_release();
-
- return 1;
-}
-
static int sgiwd93_bus_reset(struct scsi_cmnd *cmd)
{
/* FIXME perform bus-specific reset */
@@ -325,11 +197,10 @@
* arguments not with pointers. So this is going to blow up beautyfully
* on 64-bit systems with memory outside the compat address spaces.
*/
-static struct scsi_host_template driver_template = {
+static struct scsi_host_template sgiwd93_template = {
+ .module = THIS_MODULE,
.proc_name = "SGIWD93",
.name = "SGI WD93",
- .detect = sgiwd93_detect,
- .release = sgiwd93_release,
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = sgiwd93_bus_reset,
@@ -340,4 +211,109 @@
.cmd_per_lun = 8,
.use_clustering = DISABLE_CLUSTERING,
};
-#include "scsi_module.c"
+
+static int __init sgiwd93_probe(struct platform_device *pdev)
+{
+ struct sgiwd93_platform_data *pd = pdev->dev.platform_data;
+ unsigned char *wdregs = pd->wdregs;
+ struct hpc3_scsiregs *hregs = pd->hregs;
+ struct ip22_hostdata *hdata;
+ struct Scsi_Host *host;
+ wd33c93_regs regs;
+ unsigned int unit = pd->unit;
+ unsigned int irq = pd->irq;
+ int err;
+
+ host = scsi_host_alloc(&sgiwd93_template, sizeof(struct ip22_hostdata));
+ if (!host) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ host->base = (unsigned long) hregs;
+ host->irq = irq;
+
+ hdata = host_to_hostdata(host);
+ hdata->hd.cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
+ &hdata->hd.dma, GFP_KERNEL);
+ if (!hdata->hd.cpu) {
+ printk(KERN_WARNING "sgiwd93: Could not allocate memory for "
+ "host %d buffer.\n", unit);
+ err = -ENOMEM;
+ goto out_put;
+ }
+
+ init_hpc_chain(&hdata->hd);
+
+ regs.SASR = wdregs + 3;
+ regs.SCMD = wdregs + 7;
+
+ wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_MHZ(20));
+
+ if (hdata->wh.no_sync == 0xff)
+ hdata->wh.no_sync = 0;
+
+ err = request_irq(irq, sgiwd93_intr, 0, "SGI WD93", host);
+ if (err) {
+ printk(KERN_WARNING "sgiwd93: Could not register irq %d "
+ "for host %d.\n", irq, unit);
+ goto out_free;
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ err = scsi_add_host(host, NULL);
+ if (err)
+ goto out_irq;
+
+ scsi_scan_host(host);
+
+ return 0;
+
+out_irq:
+ free_irq(irq, host);
+out_free:
+ dma_free_coherent(NULL, PAGE_SIZE, hdata->hd.cpu, hdata->hd.dma);
+out_put:
+ scsi_host_put(host);
+out:
+
+ return err;
+}
+
+static void __exit sgiwd93_remove(struct platform_device *pdev)
+{
+ struct Scsi_Host *host = platform_get_drvdata(pdev);
+ struct ip22_hostdata *hdata = (struct ip22_hostdata *) host->hostdata;
+ struct sgiwd93_platform_data *pd = pdev->dev.platform_data;
+
+ scsi_remove_host(host);
+ free_irq(pd->irq, host);
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, hdata->hd.cpu, hdata->hd.dma);
+ scsi_host_put(host);
+}
+
+static struct platform_driver sgiwd93_driver = {
+ .probe = sgiwd93_probe,
+ .remove = __devexit_p(sgiwd93_remove),
+ .driver = {
+ .name = "sgiwd93"
+ }
+};
+
+static int __init sgiwd93_module_init(void)
+{
+ return platform_driver_register(&sgiwd93_driver);
+}
+
+static void __exit sgiwd93_module_exit(void)
+{
+ return platform_driver_unregister(&sgiwd93_driver);
+}
+
+module_init(sgiwd93_module_init);
+module_exit(sgiwd93_module_exit);
+
+MODULE_DESCRIPTION("SGI WD33C93 driver");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c
index 562ba74..b0ce8c5 100644
--- a/drivers/serial/8250_acorn.c
+++ b/drivers/serial/8250_acorn.c
@@ -54,7 +54,7 @@
info->num_ports = type->num_ports;
bus_addr = ecard_resource_start(ec, type->type);
- info->vaddr = ioremap(bus_addr, ecard_resource_len(ec, type->type));
+ info->vaddr = ecardm_iomap(ec, type->type, 0, 0);
if (!info->vaddr) {
kfree(info);
return -ENOMEM;
@@ -91,7 +91,6 @@
if (info->ports[i] > 0)
serial8250_unregister_port(info->ports[i]);
- iounmap(info->vaddr);
kfree(info);
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e8efe93..315ea99 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -5,6 +5,7 @@
#
menu "Serial drivers"
+ depends on HAS_IOMEM
#
# The new 8250/16550 serial drivers
@@ -358,6 +359,23 @@
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
+config SERIAL_KS8695
+ bool "Micrel KS8695 (Centaur) serial port support"
+ depends on ARCH_KS8695
+ select SERIAL_CORE
+ help
+ This selects the Micrel Centaur KS8695 UART. Say Y here.
+
+config SERIAL_KS8695_CONSOLE
+ bool "Support for console on KS8695 (Centaur) serial port"
+ depends on SERIAL_KS8695=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a KS8695 (Centaur) UART as the
+ system console (the system console is the device which
+ receives all kernel messages and warnings and which allows
+ logins in single user mode).
+
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARM && ARCH_CLPS711X
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4959bcb..08ad0d9 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -61,3 +61,4 @@
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 69715e5..a8f894c 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -88,7 +88,7 @@
/* these are located in their respective files */
void cpm_line_cr_cmd(int line, int cmd);
-int __init cpm_uart_init_portdesc(void);
+int cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f23972b..b63ff8d 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -482,7 +482,8 @@
}
static void cpm_uart_set_termios(struct uart_port *port,
- struct termios *termios, struct termios *old)
+ struct ktermios *termios,
+ struct ktermios *old)
{
int baud;
unsigned long flags;
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 925fb60..8c6324e 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -125,7 +125,7 @@
{
int dpmemsz, memsz;
u8 *dp_mem;
- uint dp_offset;
+ unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
@@ -133,7 +133,7 @@
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_DPERR(dp_offset)) {
+ if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
return -ENOMEM;
@@ -185,7 +185,7 @@
}
/* Setup any dynamic params in the uart desc */
-int __init cpm_uart_init_portdesc(void)
+int cpm_uart_init_portdesc(void)
{
pr_debug("CPM uart[-]:init portdesc\n");
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index fa45599..7b61d80 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -222,7 +222,7 @@
{
int dpmemsz, memsz;
u8 *dp_mem;
- uint dp_offset;
+ unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
@@ -230,7 +230,7 @@
dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
dp_offset = cpm_dpalloc(dpmemsz, 8);
- if (IS_DPERR(dp_offset)) {
+ if (IS_ERR_VALUE(dp_offset)) {
printk(KERN_ERR
"cpm_uart_cpm.c: could not allocate buffer descriptors\n");
return -ENOMEM;
@@ -282,7 +282,7 @@
}
/* Setup any dynamic params in the uart desc */
-int __init cpm_uart_init_portdesc(void)
+int cpm_uart_init_portdesc(void)
{
#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
u16 *addr;
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
new file mode 100644
index 0000000..c5346d6
--- /dev/null
+++ b/drivers/serial/serial_ks8695.c
@@ -0,0 +1,657 @@
+/*
+ * drivers/serial/serial_ks8695.c
+ *
+ * Driver for KS8695 serial ports
+ *
+ * Based on drivers/serial/serial_amba.c, by Kam Lee.
+ *
+ * Copyright 2002-2005 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-uart.h>
+#include <asm/arch/regs-irq.h>
+
+#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+
+#define SERIAL_KS8695_MAJOR 204
+#define SERIAL_KS8695_MINOR 16
+#define SERIAL_KS8695_DEVNAME "ttyAM"
+
+#define SERIAL_KS8695_NR 1
+
+/*
+ * Access macros for the KS8695 UART
+ */
+#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH)
+#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC)
+#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC)
+#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS)
+#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS)
+#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC)
+#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC)
+#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC)
+#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC)
+#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
+#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
+
+#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
+
+#define UART_DUMMY_LSR_RX 0x100
+#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+
+#ifdef SUPPORT_SYSRQ
+static struct console ks8695_console;
+#endif
+
+static void ks8695uart_stop_tx(struct uart_port *port)
+{
+ if (tx_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_TX);
+ tx_enabled(port) = 0;
+ }
+}
+
+static void ks8695uart_start_tx(struct uart_port *port)
+{
+ if (!tx_enabled(port)) {
+ enable_irq(KS8695_IRQ_UART_TX);
+ tx_enabled(port) = 1;
+ }
+}
+
+static void ks8695uart_stop_rx(struct uart_port *port)
+{
+ if (rx_enabled(port)) {
+ disable_irq(KS8695_IRQ_UART_RX);
+ rx_enabled(port) = 0;
+ }
+}
+
+static void ks8695uart_enable_ms(struct uart_port *port)
+{
+ enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+}
+
+static void ks8695uart_disable_ms(struct uart_port *port)
+{
+ disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+}
+
+static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, lsr, flg, max_count = 256;
+
+ status = UART_GET_LSR(port); /* clears pending LSR interrupts */
+ while ((status & URLS_URDR) && max_count--) {
+ ch = UART_GET_CHAR(port);
+ flg = TTY_NORMAL;
+
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
+ if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
+ if (lsr & URLS_URBI) {
+ lsr &= ~(URLS_URFE | URLS_URPE);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+ if (lsr & URLS_URPE)
+ port->icount.parity++;
+ if (lsr & URLS_URFE)
+ port->icount.frame++;
+ if (lsr & URLS_URROE)
+ port->icount.overrun++;
+
+ lsr &= port->read_status_mask;
+
+ if (lsr & URLS_URBI)
+ flg = TTY_BREAK;
+ else if (lsr & URLS_URPE)
+ flg = TTY_PARITY;
+ else if (lsr & URLS_URFE)
+ flg = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, lsr, URLS_URROE, ch, flg);
+
+ignore_char:
+ status = UART_GET_LSR(port);
+ }
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct circ_buf *xmit = &port->info->xmit;
+ unsigned int count;
+
+ if (port->x_char) {
+ KS8695_CLR_TX_INT();
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return IRQ_HANDLED;
+ }
+
+ if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
+ ks8695uart_stop_tx(port);
+ return IRQ_HANDLED;
+ }
+
+ count = 16; /* fifo size */
+ while (!uart_circ_empty(xmit) && (count-- > 0)) {
+ KS8695_CLR_TX_INT();
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ ks8695uart_stop_tx(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status;
+
+ /*
+ * clear modem interrupt by reading MSR
+ */
+ status = UART_GET_MSR(port);
+
+ if (status & URMS_URDDCD)
+ uart_handle_dcd_change(port, status & URMS_URDDCD);
+
+ if (status & URMS_URDDST)
+ port->icount.dsr++;
+
+ if (status & URMS_URDCTS)
+ uart_handle_cts_change(port, status & URMS_URDCTS);
+
+ if (status & URMS_URTERI)
+ port->icount.rng++;
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int ks8695uart_tx_empty(struct uart_port *port)
+{
+ return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int status;
+
+ status = UART_GET_MSR(port);
+ if (status & URMS_URDCD)
+ result |= TIOCM_CAR;
+ if (status & URMS_URDSR)
+ result |= TIOCM_DSR;
+ if (status & URMS_URCTS)
+ result |= TIOCM_CTS;
+ if (status & URMS_URRI)
+ result |= TIOCM_RI;
+
+ return result;
+}
+
+static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ unsigned int mcr;
+
+ mcr = UART_GET_MCR(port);
+ if (mctrl & TIOCM_RTS)
+ mcr |= URMC_URRTS;
+ else
+ mcr &= ~URMC_URRTS;
+
+ if (mctrl & TIOCM_DTR)
+ mcr |= URMC_URDTR;
+ else
+ mcr &= ~URMC_URDTR;
+
+ UART_PUT_MCR(port, mcr);
+}
+
+static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned int lcr;
+
+ lcr = UART_GET_LCR(port);
+
+ if (break_state == -1)
+ lcr |= URLC_URSBC;
+ else
+ lcr &= ~URLC_URSBC;
+
+ UART_PUT_LCR(port, lcr);
+}
+
+static int ks8695uart_startup(struct uart_port *port)
+{
+ int retval;
+
+ set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
+ tx_enabled(port) = 0;
+ rx_enabled(port) = 1;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
+ if (retval)
+ goto err_tx;
+
+ retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
+ if (retval)
+ goto err_rx;
+
+ retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
+ if (retval)
+ return err_ls;
+
+ retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
+ if (retval)
+ return err_ms;
+
+ return 0;
+
+err_ms:
+ free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
+err_ls:
+ free_irq(KS8695_IRQ_UART_RX, port);
+err_rx:
+ free_irq(KS8695_IRQ_UART_TX, port);
+err_tx:
+ return retval;
+}
+
+static void ks8695uart_shutdown(struct uart_port *port)
+{
+ /*
+ * Free the interrupt
+ */
+ free_irq(KS8695_IRQ_UART_RX, port);
+ free_irq(KS8695_IRQ_UART_TX, port);
+ free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
+ free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
+
+ /* disable break condition and fifos */
+ UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
+ UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
+}
+
+static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int lcr, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = URCL_5;
+ break;
+ case CS6:
+ lcr = URCL_6;
+ break;
+ case CS7:
+ lcr = URCL_7;
+ break;
+ default:
+ lcr = URCL_8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= URLC_URSB;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
+ if (termios->c_cflag & PARODD)
+ lcr |= URPE_MARK;
+ else
+ lcr |= URPE_SPACE;
+ }
+ else if (termios->c_cflag & PARODD)
+ lcr |= URPE_ODD;
+ else
+ lcr |= URPE_EVEN;
+ }
+
+ if (port->fifosize > 1)
+ fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = URLS_URROE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= (URLS_URFE | URLS_URPE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= URLS_URBI;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= URLS_URBI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= URLS_URROE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_LSR_RX;
+
+ /* first, disable everything */
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ ks8695uart_enable_ms(port);
+ else
+ ks8695uart_disable_ms(port);
+
+ /* Set baud rate */
+ UART_PUT_BRDR(port, quot);
+
+ UART_PUT_LCR(port, lcr);
+ UART_PUT_FCR(port, fcr);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *ks8695uart_type(struct uart_port *port)
+{
+ return port->type == PORT_KS8695 ? "KS8695" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void ks8695uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int ks8695uart_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
+ "serial_ks8695") != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void ks8695uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_KS8695;
+ ks8695uart_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
+ ret = -EINVAL;
+ if (ser->irq != port->irq)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops ks8695uart_pops = {
+ .tx_empty = ks8695uart_tx_empty,
+ .set_mctrl = ks8695uart_set_mctrl,
+ .get_mctrl = ks8695uart_get_mctrl,
+ .stop_tx = ks8695uart_stop_tx,
+ .start_tx = ks8695uart_start_tx,
+ .stop_rx = ks8695uart_stop_rx,
+ .enable_ms = ks8695uart_enable_ms,
+ .break_ctl = ks8695uart_break_ctl,
+ .startup = ks8695uart_startup,
+ .shutdown = ks8695uart_shutdown,
+ .set_termios = ks8695uart_set_termios,
+ .type = ks8695uart_type,
+ .release_port = ks8695uart_release_port,
+ .request_port = ks8695uart_request_port,
+ .config_port = ks8695uart_config_port,
+ .verify_port = ks8695uart_verify_port,
+};
+
+static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
+ {
+ .membase = (void *) KS8695_UART_VA,
+ .mapbase = KS8695_UART_VA,
+ .iotype = SERIAL_IO_MEM,
+ .irq = KS8695_IRQ_UART_TX,
+ .uartclk = CLOCK_TICK_RATE * 16,
+ .fifosize = 16,
+ .ops = &ks8695uart_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ }
+};
+
+#ifdef CONFIG_SERIAL_KS8695_CONSOLE
+static void ks8695_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(UART_GET_LSR(port) & URLS_URTHRE))
+ barrier();
+
+ UART_PUT_CHAR(port, ch);
+}
+
+static void ks8695_console_write(struct console *co, const char *s, u_int count)
+{
+ struct uart_port *port = ks8695uart_ports + co->index;
+
+ uart_console_write(port, s, count, ks8695_console_putchar);
+}
+
+static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+{
+ unsigned int lcr;
+
+ lcr = UART_GET_LCR(port);
+
+ switch (lcr & URLC_PARITY) {
+ case URPE_ODD:
+ *parity = 'o';
+ break;
+ case URPE_EVEN:
+ *parity = 'e';
+ break;
+ default:
+ *parity = 'n';
+ }
+
+ switch (lcr & URLC_URCL) {
+ case URCL_5:
+ *bits = 5;
+ break;
+ case URCL_6:
+ *bits = 6;
+ break;
+ case URCL_7:
+ *bits = 7;
+ break;
+ default:
+ *bits = 8;
+ }
+
+ *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
+ *baud /= 16;
+ *baud &= 0xFFFFFFF0;
+}
+
+static int __init ks8695_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ ks8695_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver ks8695_reg;
+
+static struct console ks8695_console = {
+ .name = SERIAL_KS8695_DEVNAME,
+ .write = ks8695_console_write,
+ .device = uart_console_device,
+ .setup = ks8695_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ks8695_reg,
+};
+
+static int __init ks8695_console_init(void)
+{
+ register_console(&ks8695_console);
+ return 0;
+}
+
+console_initcall(ks8695_console_init);
+
+#define KS8695_CONSOLE &ks8695_console
+#else
+#define KS8695_CONSOLE NULL
+#endif
+
+static struct uart_driver ks8695_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial_ks8695",
+ .dev_name = SERIAL_KS8695_DEVNAME,
+ .major = SERIAL_KS8695_MAJOR,
+ .minor = SERIAL_KS8695_MINOR,
+ .nr = SERIAL_KS8695_NR,
+ .cons = KS8695_CONSOLE,
+};
+
+static int __init ks8695uart_init(void)
+{
+ int i, ret;
+
+ printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
+
+ ret = uart_register_driver(&ks8695_reg);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < SERIAL_KS8695_NR; i++)
+ uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
+
+ return 0;
+}
+
+static void __exit ks8695uart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < SERIAL_KS8695_NR; i++)
+ uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
+ uart_unregister_driver(&ks8695_reg);
+}
+
+module_init(ks8695uart_init);
+module_exit(ks8695uart_exit);
+
+MODULE_DESCRIPTION("KS8695 serial port driver");
+MODULE_AUTHOR("Micrel Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 40d4856..c3a6bd2 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -493,6 +493,10 @@
.name = "console",
.compatible = "qcn",
},
+ {
+ .name = "console",
+ .compatible = "SUNW,sun4v-console",
+ },
{},
};
MODULE_DEVICE_TABLE(of, hv_match);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index da73205..0985193 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -92,6 +92,8 @@
#define SUNZILOG_FLAG_REGS_HELD 0x00000040
#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
+#define SUNZILOG_FLAG_ESCC 0x00000200
+#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400
unsigned int cflag;
@@ -174,9 +176,11 @@
/* This function must only be called when the TX is not busy. The UART
* port lock must be held and local interrupts disabled.
*/
-static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
+static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
{
int i;
+ int escc;
+ unsigned char r15;
/* Let pending transmits finish. */
for (i = 0; i < 1000; i++) {
@@ -229,11 +233,25 @@
write_zsreg(channel, R14, regs[R14]);
/* External status interrupt control. */
- write_zsreg(channel, R15, regs[R15]);
+ write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN);
+
+ /* ESCC Extension Register */
+ r15 = read_zsreg(channel, R15);
+ if (r15 & 0x01) {
+ write_zsreg(channel, R7, regs[R7p]);
+
+ /* External status interrupt and FIFO control. */
+ write_zsreg(channel, R15, regs[R15] & ~WR7pEN);
+ escc = 1;
+ } else {
+ /* Clear FIFO bit case it is an issue */
+ regs[R15] &= ~FIFOEN;
+ escc = 0;
+ }
/* Reset external status interrupts. */
- write_zsreg(channel, R0, RES_EXT_INT);
- write_zsreg(channel, R0, RES_EXT_INT);
+ write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */
+ write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */
/* Rewrite R3/R5, this time without enables masked. */
write_zsreg(channel, R3, regs[R3]);
@@ -241,6 +259,8 @@
/* Rewrite R1, this time without IRQ enabled masked. */
write_zsreg(channel, R1, regs[R1]);
+
+ return escc;
}
/* Reprogram the Zilog channel HW registers with the copies found in the
@@ -731,7 +751,7 @@
up->curregs[R15] = new_reg;
/* NOTE: Not subject to 'transmitter active' rule. */
- write_zsreg(channel, R15, up->curregs[R15]);
+ write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
}
}
@@ -861,44 +881,44 @@
up->curregs[R14] = BRSRC | BRENAB;
/* Character size, stop bits, and parity. */
- up->curregs[3] &= ~RxN_MASK;
- up->curregs[5] &= ~TxN_MASK;
+ up->curregs[R3] &= ~RxN_MASK;
+ up->curregs[R5] &= ~TxN_MASK;
switch (cflag & CSIZE) {
case CS5:
- up->curregs[3] |= Rx5;
- up->curregs[5] |= Tx5;
+ up->curregs[R3] |= Rx5;
+ up->curregs[R5] |= Tx5;
up->parity_mask = 0x1f;
break;
case CS6:
- up->curregs[3] |= Rx6;
- up->curregs[5] |= Tx6;
+ up->curregs[R3] |= Rx6;
+ up->curregs[R5] |= Tx6;
up->parity_mask = 0x3f;
break;
case CS7:
- up->curregs[3] |= Rx7;
- up->curregs[5] |= Tx7;
+ up->curregs[R3] |= Rx7;
+ up->curregs[R5] |= Tx7;
up->parity_mask = 0x7f;
break;
case CS8:
default:
- up->curregs[3] |= Rx8;
- up->curregs[5] |= Tx8;
+ up->curregs[R3] |= Rx8;
+ up->curregs[R5] |= Tx8;
up->parity_mask = 0xff;
break;
};
- up->curregs[4] &= ~0x0c;
+ up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB)
- up->curregs[4] |= SB2;
+ up->curregs[R4] |= SB2;
else
- up->curregs[4] |= SB1;
+ up->curregs[R4] |= SB1;
if (cflag & PARENB)
- up->curregs[4] |= PAR_ENAB;
+ up->curregs[R4] |= PAR_ENAB;
else
- up->curregs[4] &= ~PAR_ENAB;
+ up->curregs[R4] &= ~PAR_ENAB;
if (!(cflag & PARODD))
- up->curregs[4] |= PAR_EVEN;
+ up->curregs[R4] |= PAR_EVEN;
else
- up->curregs[4] &= ~PAR_EVEN;
+ up->curregs[R4] &= ~PAR_EVEN;
up->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
@@ -952,7 +972,9 @@
static const char *sunzilog_type(struct uart_port *port)
{
- return "zs";
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+
+ return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs";
}
/* We do not request/release mappings of the registers here, this
@@ -1170,7 +1192,7 @@
spin_lock_irqsave(&up->port.lock, flags);
- up->curregs[R15] = BRKIE;
+ up->curregs[R15] |= BRKIE;
sunzilog_convert_to_zs(up, con->cflag, 0, brg);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
@@ -1229,7 +1251,7 @@
baud = 4800;
}
- up->curregs[R15] = BRKIE;
+ up->curregs[R15] |= BRKIE;
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
sunzilog_convert_to_zs(up, up->cflag, 0, brg);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
@@ -1283,8 +1305,18 @@
if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
SUNZILOG_FLAG_CONS_MOUSE)) {
+ up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+ up->curregs[R3] = RxENAB | Rx8;
+ up->curregs[R5] = TxENAB | Tx8;
+ up->curregs[R6] = 0x00; /* SDLC Address */
+ up->curregs[R7] = 0x7E; /* SDLC Flag */
+ up->curregs[R9] = NV;
+ up->curregs[R7p] = 0x00;
sunzilog_init_kbdms(up, up->port.line);
- up->curregs[R9] |= (NV | MIE);
+ /* Only enable interrupts if an ISR handler available */
+ if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+ up->curregs[R9] |= MIE;
write_zsreg(channel, R9, up->curregs[R9]);
} else {
/* Normal serial TTY. */
@@ -1293,7 +1325,9 @@
up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
up->curregs[R3] = RxENAB | Rx8;
up->curregs[R5] = TxENAB | Tx8;
- up->curregs[R9] = NV | MIE;
+ up->curregs[R6] = 0x00; /* SDLC Address */
+ up->curregs[R7] = 0x7E; /* SDLC Flag */
+ up->curregs[R9] = NV;
up->curregs[R10] = NRZ;
up->curregs[R11] = TCBR | RCBR;
baud = 9600;
@@ -1301,7 +1335,14 @@
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
up->curregs[R14] = BRSRC | BRENAB;
- __load_zsregs(channel, up->curregs);
+ up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */
+ up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL;
+ if (__load_zsregs(channel, up->curregs)) {
+ up->flags |= SUNZILOG_FLAG_ESCC;
+ }
+ /* Only enable interrupts if an ISR handler available */
+ if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+ up->curregs[R9] |= MIE;
write_zsreg(channel, R9, up->curregs[R9]);
}
@@ -1390,12 +1431,14 @@
return err;
}
} else {
- printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
- "is a zs\n",
- op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
- printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
- "is a zs\n",
- op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
+ printk(KERN_INFO "%s: Keyboard at MMIO 0x%lx (irq = %d) "
+ "is a %s\n",
+ op->dev.bus_id, up[0].port.mapbase, op->irqs[0],
+ sunzilog_type (&up[0].port));
+ printk(KERN_INFO "%s: Mouse at MMIO 0x%lx (irq = %d) "
+ "is a %s\n",
+ op->dev.bus_id, up[1].port.mapbase, op->irqs[0],
+ sunzilog_type (&up[1].port));
}
dev_set_drvdata(&op->dev, &up[0]);
@@ -1487,10 +1530,23 @@
goto out_unregister_uart;
if (zilog_irq != -1) {
+ struct uart_sunzilog_port *up = sunzilog_irq_chain;
err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
"zs", sunzilog_irq_chain);
if (err)
goto out_unregister_driver;
+
+ /* Enable Interrupts */
+ while (up) {
+ struct zilog_channel __iomem *channel;
+
+ /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->flags |= SUNZILOG_FLAG_ISR_HANDLER;
+ up->curregs[R9] |= MIE;
+ write_zsreg(channel, R9, up->curregs[R9]);
+ up = up->next;
+ }
}
out:
@@ -1515,6 +1571,20 @@
of_unregister_driver(&zs_driver);
if (zilog_irq != -1) {
+ struct uart_sunzilog_port *up = sunzilog_irq_chain;
+
+ /* Disable Interrupts */
+ while (up) {
+ struct zilog_channel __iomem *channel;
+
+ /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER;
+ up->curregs[R9] &= ~MIE;
+ write_zsreg(channel, R9, up->curregs[R9]);
+ up = up->next;
+ }
+
free_irq(zilog_irq, sunzilog_irq_chain);
zilog_irq = -1;
}
diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h
index 7939b6d..5dec7b4 100644
--- a/drivers/serial/sunzilog.h
+++ b/drivers/serial/sunzilog.h
@@ -13,7 +13,8 @@
struct zilog_channel channelA;
};
-#define NUM_ZSREGS 16
+#define NUM_ZSREGS 17
+#define R7p 16 /* Written as R7 with P15 bit 0 set */
/* Conversion routines to/from brg time constants from/to bits
* per second.
@@ -127,6 +128,15 @@
/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+/* Write Register 7' (ESCC Only) */
+#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */
+#define AUTO_EOM_RST 2 /* Automatic EOM Reset */
+#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */
+#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */
+#define nDTRnREQ 0x10 /* /DTR/REQ timing */
+#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */
+#define EXT_RD_EN 0x40 /* Extended read register enable */
+
/* Write Register 8 (transmit buffer) */
/* Write Register 9 (Master interrupt control) */
@@ -135,6 +145,7 @@
#define DLC 4 /* Disable Lower Chain */
#define MIE 8 /* Master Interrupt Enable */
#define STATHI 0x10 /* Status high */
+#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */
#define NORESET 0 /* No reset on write to R9 */
#define CHRB 0x40 /* Reset channel B */
#define CHRA 0x80 /* Reset channel A */
@@ -187,7 +198,9 @@
#define SNRZI 0xe0 /* Set NRZI mode */
/* Write Register 15 (external/status interrupt control) */
+#define WR7pEN 1 /* WR7' Enable (ESCC only) */
#define ZCIE 2 /* Zero count IE */
+#define FIFOEN 4 /* FIFO Enable (ESCC only) */
#define DCDIE 8 /* DCD IE */
#define SYNCIE 0x10 /* Sync/hunt IE */
#define CTSIE 0x20 /* CTS IE */
@@ -241,6 +254,10 @@
#define CHATxIP 0x10 /* Channel A Tx IP */
#define CHARxIP 0x20 /* Channel A Rx IP */
+/* Read Register 6 (LSB frame byte count [Not on NMOS]) */
+
+/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */
+
/* Read Register 8 (receive data register) */
/* Read Register 10 (misc status bits) */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 07c587e..5e3f748 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -6,6 +6,7 @@
# fully appropriate there, so it'd need some thought to do well.
#
menu "SPI support"
+ depends on HAS_IOMEM
config SPI
bool "SPI support"
@@ -106,6 +107,13 @@
This enables using the Freescale iMX SPI controller in master
mode.
+config SPI_MPC52xx_PSC
+ tristate "Freescale MPC52xx PSC SPI controller"
+ depends on SPI_MASTER && PPC_MPC52xx && EXPERIMENTAL
+ help
+ This enables using the Freescale MPC52xx Programmable Serial
+ Controller in master SPI mode.
+
config SPI_MPC83xx
tristate "Freescale MPC83xx SPI controller"
depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 624b636..5788d86 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
+obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
new file mode 100644
index 0000000..052359f
--- /dev/null
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -0,0 +1,654 @@
+/*
+ * MPC52xx SPC in SPI mode driver.
+ *
+ * Maintainer: Dragos Carp
+ *
+ * Copyright (C) 2006 TOPTICA Photonics AG.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+
+#if defined(CONFIG_PPC_MERGE)
+#include <asm/of_platform.h>
+#else
+#include <linux/platform_device.h>
+#endif
+
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
+
+#define MCLK 20000000 /* PSC port MClk in hz */
+
+struct mpc52xx_psc_spi {
+ /* fsl_spi_platform data */
+ void (*activate_cs)(u8, u8);
+ void (*deactivate_cs)(u8, u8);
+ u32 sysclk;
+
+ /* driver internal data */
+ struct mpc52xx_psc __iomem *psc;
+ unsigned int irq;
+ u8 bits_per_word;
+ u8 busy;
+
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ struct list_head queue;
+ spinlock_t lock;
+
+ struct completion done;
+};
+
+/* controller state */
+struct mpc52xx_psc_spi_cs {
+ int bits_per_word;
+ int speed_hz;
+};
+
+/* set clock freq, clock ramp, bits per work
+ * if t is NULL then reset the values to the default values
+ */
+static int mpc52xx_psc_spi_transfer_setup(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct mpc52xx_psc_spi_cs *cs = spi->controller_state;
+
+ cs->speed_hz = (t && t->speed_hz)
+ ? t->speed_hz : spi->max_speed_hz;
+ cs->bits_per_word = (t && t->bits_per_word)
+ ? t->bits_per_word : spi->bits_per_word;
+ cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
+ return 0;
+}
+
+static void mpc52xx_psc_spi_activate_cs(struct spi_device *spi)
+{
+ struct mpc52xx_psc_spi_cs *cs = spi->controller_state;
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
+ struct mpc52xx_psc __iomem *psc = mps->psc;
+ u32 sicr;
+ u16 ccr;
+
+ sicr = in_be32(&psc->sicr);
+
+ /* Set clock phase and polarity */
+ if (spi->mode & SPI_CPHA)
+ sicr |= 0x00001000;
+ else
+ sicr &= ~0x00001000;
+ if (spi->mode & SPI_CPOL)
+ sicr |= 0x00002000;
+ else
+ sicr &= ~0x00002000;
+
+ if (spi->mode & SPI_LSB_FIRST)
+ sicr |= 0x10000000;
+ else
+ sicr &= ~0x10000000;
+ out_be32(&psc->sicr, sicr);
+
+ /* Set clock frequency and bits per word
+ * Because psc->ccr is defined as 16bit register instead of 32bit
+ * just set the lower byte of BitClkDiv
+ */
+ ccr = in_be16(&psc->ccr);
+ ccr &= 0xFF00;
+ if (cs->speed_hz)
+ ccr |= (MCLK / cs->speed_hz - 1) & 0xFF;
+ else /* by default SPI Clk 1MHz */
+ ccr |= (MCLK / 1000000 - 1) & 0xFF;
+ out_be16(&psc->ccr, ccr);
+ mps->bits_per_word = cs->bits_per_word;
+
+ if (mps->activate_cs)
+ mps->activate_cs(spi->chip_select,
+ (spi->mode & SPI_CS_HIGH) ? 1 : 0);
+}
+
+static void mpc52xx_psc_spi_deactivate_cs(struct spi_device *spi)
+{
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
+
+ if (mps->deactivate_cs)
+ mps->deactivate_cs(spi->chip_select,
+ (spi->mode & SPI_CS_HIGH) ? 1 : 0);
+}
+
+#define MPC52xx_PSC_BUFSIZE (MPC52xx_PSC_RFNUM_MASK + 1)
+/* wake up when 80% fifo full */
+#define MPC52xx_PSC_RFALARM (MPC52xx_PSC_BUFSIZE * 20 / 100)
+
+static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
+ struct mpc52xx_psc __iomem *psc = mps->psc;
+ unsigned rb = 0; /* number of bytes receieved */
+ unsigned sb = 0; /* number of bytes sent */
+ unsigned char *rx_buf = (unsigned char *)t->rx_buf;
+ unsigned char *tx_buf = (unsigned char *)t->tx_buf;
+ unsigned rfalarm;
+ unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
+ unsigned recv_at_once;
+ unsigned bpw = mps->bits_per_word / 8;
+
+ if (!t->tx_buf && !t->rx_buf && t->len)
+ return -EINVAL;
+
+ /* enable transmiter/receiver */
+ out_8(&psc->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+ while (rb < t->len) {
+ if (t->len - rb > MPC52xx_PSC_BUFSIZE) {
+ rfalarm = MPC52xx_PSC_RFALARM;
+ } else {
+ send_at_once = t->len - sb;
+ rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb);
+ }
+
+ dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
+ if (tx_buf) {
+ for (; send_at_once; sb++, send_at_once--) {
+ /* set EOF flag */
+ if (mps->bits_per_word
+ && (sb + 1) % bpw == 0)
+ out_8(&psc->ircr2, 0x01);
+ out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]);
+ }
+ } else {
+ for (; send_at_once; sb++, send_at_once--) {
+ /* set EOF flag */
+ if (mps->bits_per_word
+ && ((sb + 1) % bpw) == 0)
+ out_8(&psc->ircr2, 0x01);
+ out_8(&psc->mpc52xx_psc_buffer_8, 0);
+ }
+ }
+
+
+ /* enable interupts and wait for wake up
+ * if just one byte is expected the Rx FIFO genererates no
+ * FFULL interrupt, so activate the RxRDY interrupt
+ */
+ out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ if (t->len - rb == 1) {
+ out_8(&psc->mode, 0);
+ } else {
+ out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL);
+ out_be16(&psc->rfalarm, rfalarm);
+ }
+ out_be16(&psc->mpc52xx_psc_imr, MPC52xx_PSC_IMR_RXRDY);
+ wait_for_completion(&mps->done);
+ recv_at_once = in_be16(&psc->rfnum);
+ dev_dbg(&spi->dev, "%d bytes received\n", recv_at_once);
+
+ send_at_once = recv_at_once;
+ if (rx_buf) {
+ for (; recv_at_once; rb++, recv_at_once--)
+ rx_buf[rb] = in_8(&psc->mpc52xx_psc_buffer_8);
+ } else {
+ for (; recv_at_once; rb++, recv_at_once--)
+ in_8(&psc->mpc52xx_psc_buffer_8);
+ }
+ }
+ /* disable transmiter/receiver */
+ out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
+
+ return 0;
+}
+
+static void mpc52xx_psc_spi_work(struct work_struct *work)
+{
+ struct mpc52xx_psc_spi *mps =
+ container_of(work, struct mpc52xx_psc_spi, work);
+
+ spin_lock_irq(&mps->lock);
+ mps->busy = 1;
+ while (!list_empty(&mps->queue)) {
+ struct spi_message *m;
+ struct spi_device *spi;
+ struct spi_transfer *t = NULL;
+ unsigned cs_change;
+ int status;
+
+ m = container_of(mps->queue.next, struct spi_message, queue);
+ list_del_init(&m->queue);
+ spin_unlock_irq(&mps->lock);
+
+ spi = m->spi;
+ cs_change = 1;
+ status = 0;
+ list_for_each_entry (t, &m->transfers, transfer_list) {
+ if (t->bits_per_word || t->speed_hz) {
+ status = mpc52xx_psc_spi_transfer_setup(spi, t);
+ if (status < 0)
+ break;
+ }
+
+ if (cs_change)
+ mpc52xx_psc_spi_activate_cs(spi);
+ cs_change = t->cs_change;
+
+ status = mpc52xx_psc_spi_transfer_rxtx(spi, t);
+ if (status)
+ break;
+ m->actual_length += t->len;
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (cs_change)
+ mpc52xx_psc_spi_deactivate_cs(spi);
+ }
+
+ m->status = status;
+ m->complete(m->context);
+
+ if (status || !cs_change)
+ mpc52xx_psc_spi_deactivate_cs(spi);
+
+ mpc52xx_psc_spi_transfer_setup(spi, NULL);
+
+ spin_lock_irq(&mps->lock);
+ }
+ mps->busy = 0;
+ spin_unlock_irq(&mps->lock);
+}
+
+static int mpc52xx_psc_spi_setup(struct spi_device *spi)
+{
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
+ struct mpc52xx_psc_spi_cs *cs = spi->controller_state;
+ unsigned long flags;
+
+ if (spi->bits_per_word%8)
+ return -EINVAL;
+
+ if (!cs) {
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+ spi->controller_state = cs;
+ }
+
+ cs->bits_per_word = spi->bits_per_word;
+ cs->speed_hz = spi->max_speed_hz;
+
+ spin_lock_irqsave(&mps->lock, flags);
+ if (!mps->busy)
+ mpc52xx_psc_spi_deactivate_cs(spi);
+ spin_unlock_irqrestore(&mps->lock, flags);
+
+ return 0;
+}
+
+static int mpc52xx_psc_spi_transfer(struct spi_device *spi,
+ struct spi_message *m)
+{
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spin_lock_irqsave(&mps->lock, flags);
+ list_add_tail(&m->queue, &mps->queue);
+ queue_work(mps->workqueue, &mps->work);
+ spin_unlock_irqrestore(&mps->lock, flags);
+
+ return 0;
+}
+
+static void mpc52xx_psc_spi_cleanup(struct spi_device *spi)
+{
+ kfree(spi->controller_state);
+}
+
+static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+ struct mpc52xx_gpio __iomem *gpio;
+ struct mpc52xx_psc __iomem *psc = mps->psc;
+ u32 ul;
+ u32 mclken_div;
+ int ret = 0;
+
+#if defined(CONFIG_PPC_MERGE)
+ cdm = mpc52xx_find_and_map("mpc52xx-cdm");
+ gpio = mpc52xx_find_and_map("mpc52xx-gpio");
+#else
+ cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+ gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
+#endif
+ if (!cdm || !gpio) {
+ printk(KERN_ERR "Error mapping CDM/GPIO\n");
+ ret = -EFAULT;
+ goto unmap_regs;
+ }
+
+ /* default sysclk is 512MHz */
+ mclken_div = 0x8000 |
+ (((mps->sysclk ? mps->sysclk : 512000000) / MCLK) & 0x1FF);
+
+ switch (psc_id) {
+ case 1:
+ ul = in_be32(&gpio->port_config);
+ ul &= 0xFFFFFFF8;
+ ul |= 0x00000006;
+ out_be32(&gpio->port_config, ul);
+ out_be16(&cdm->mclken_div_psc1, mclken_div);
+ ul = in_be32(&cdm->clk_enables);
+ ul |= 0x00000020;
+ out_be32(&cdm->clk_enables, ul);
+ break;
+ case 2:
+ ul = in_be32(&gpio->port_config);
+ ul &= 0xFFFFFF8F;
+ ul |= 0x00000060;
+ out_be32(&gpio->port_config, ul);
+ out_be16(&cdm->mclken_div_psc2, mclken_div);
+ ul = in_be32(&cdm->clk_enables);
+ ul |= 0x00000040;
+ out_be32(&cdm->clk_enables, ul);
+ break;
+ case 3:
+ ul = in_be32(&gpio->port_config);
+ ul &= 0xFFFFF0FF;
+ ul |= 0x00000600;
+ out_be32(&gpio->port_config, ul);
+ out_be16(&cdm->mclken_div_psc3, mclken_div);
+ ul = in_be32(&cdm->clk_enables);
+ ul |= 0x00000080;
+ out_be32(&cdm->clk_enables, ul);
+ break;
+ case 6:
+ ul = in_be32(&gpio->port_config);
+ ul &= 0xFF8FFFFF;
+ ul |= 0x00700000;
+ out_be32(&gpio->port_config, ul);
+ out_be16(&cdm->mclken_div_psc6, mclken_div);
+ ul = in_be32(&cdm->clk_enables);
+ ul |= 0x00000010;
+ out_be32(&cdm->clk_enables, ul);
+ break;
+ default:
+ ret = -EINVAL;
+ goto unmap_regs;
+ }
+
+ /* Reset the PSC into a known state */
+ out_8(&psc->command, MPC52xx_PSC_RST_RX);
+ out_8(&psc->command, MPC52xx_PSC_RST_TX);
+ out_8(&psc->command, MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
+
+ /* Disable interrupts, interrupts are based on alarm level */
+ out_be16(&psc->mpc52xx_psc_imr, 0);
+ out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ out_8(&psc->rfcntl, 0);
+ out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL);
+
+ /* Configure 8bit codec mode as a SPI master and use EOF flags */
+ /* SICR_SIM_CODEC8|SICR_GENCLK|SICR_SPI|SICR_MSTR|SICR_USEEOF */
+ out_be32(&psc->sicr, 0x0180C800);
+ out_be16(&psc->ccr, 0x070F); /* by default SPI Clk 1MHz */
+
+ /* Set 2ms DTL delay */
+ out_8(&psc->ctur, 0x00);
+ out_8(&psc->ctlr, 0x84);
+
+ mps->bits_per_word = 8;
+
+unmap_regs:
+ if (cdm)
+ iounmap(cdm);
+ if (gpio)
+ iounmap(gpio);
+
+ return ret;
+}
+
+static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
+{
+ struct mpc52xx_psc_spi *mps = (struct mpc52xx_psc_spi *)dev_id;
+ struct mpc52xx_psc __iomem *psc = mps->psc;
+
+ /* disable interrupt and wake up the work queue */
+ if (in_be16(&psc->mpc52xx_psc_isr) & MPC52xx_PSC_IMR_RXRDY) {
+ out_be16(&psc->mpc52xx_psc_imr, 0);
+ complete(&mps->done);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+/* bus_num is used only for the case dev->platform_data == NULL */
+static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
+ u32 size, unsigned int irq, s16 bus_num)
+{
+ struct fsl_spi_platform_data *pdata = dev->platform_data;
+ struct mpc52xx_psc_spi *mps;
+ struct spi_master *master;
+ int ret;
+
+ if (pdata == NULL)
+ return -ENODEV;
+
+ master = spi_alloc_master(dev, sizeof *mps);
+ if (master == NULL)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, master);
+ mps = spi_master_get_devdata(master);
+
+ mps->irq = irq;
+ if (pdata == NULL) {
+ dev_warn(dev, "probe called without platform data, no "
+ "(de)activate_cs function will be called\n");
+ mps->activate_cs = NULL;
+ mps->deactivate_cs = NULL;
+ mps->sysclk = 0;
+ master->bus_num = bus_num;
+ master->num_chipselect = 255;
+ } else {
+ mps->activate_cs = pdata->activate_cs;
+ mps->deactivate_cs = pdata->deactivate_cs;
+ mps->sysclk = pdata->sysclk;
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->max_chipselect;
+ }
+ master->setup = mpc52xx_psc_spi_setup;
+ master->transfer = mpc52xx_psc_spi_transfer;
+ master->cleanup = mpc52xx_psc_spi_cleanup;
+
+ mps->psc = ioremap(regaddr, size);
+ if (!mps->psc) {
+ dev_err(dev, "could not ioremap I/O port range\n");
+ ret = -EFAULT;
+ goto free_master;
+ }
+
+ ret = request_irq(mps->irq, mpc52xx_psc_spi_isr, 0, "mpc52xx-psc-spi",
+ mps);
+ if (ret)
+ goto free_master;
+
+ ret = mpc52xx_psc_spi_port_config(master->bus_num, mps);
+ if (ret < 0)
+ goto free_irq;
+
+ spin_lock_init(&mps->lock);
+ init_completion(&mps->done);
+ INIT_WORK(&mps->work, mpc52xx_psc_spi_work);
+ INIT_LIST_HEAD(&mps->queue);
+
+ mps->workqueue = create_singlethread_workqueue(
+ master->cdev.dev->bus_id);
+ if (mps->workqueue == NULL) {
+ ret = -EBUSY;
+ goto free_irq;
+ }
+
+ ret = spi_register_master(master);
+ if (ret < 0)
+ goto unreg_master;
+
+ return ret;
+
+unreg_master:
+ destroy_workqueue(mps->workqueue);
+free_irq:
+ free_irq(mps->irq, mps);
+free_master:
+ if (mps->psc)
+ iounmap(mps->psc);
+ spi_master_put(master);
+
+ return ret;
+}
+
+static int __exit mpc52xx_psc_spi_do_remove(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
+
+ flush_workqueue(mps->workqueue);
+ destroy_workqueue(mps->workqueue);
+ spi_unregister_master(master);
+ free_irq(mps->irq, mps);
+ if (mps->psc)
+ iounmap(mps->psc);
+
+ return 0;
+}
+
+#if !defined(CONFIG_PPC_MERGE)
+static int __init mpc52xx_psc_spi_probe(struct platform_device *dev)
+{
+ switch(dev->id) {
+ case 1:
+ case 2:
+ case 3:
+ case 6:
+ return mpc52xx_psc_spi_do_probe(&dev->dev,
+ MPC52xx_PA(MPC52xx_PSCx_OFFSET(dev->id)),
+ MPC52xx_PSC_SIZE, platform_get_irq(dev, 0), dev->id);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int __exit mpc52xx_psc_spi_remove(struct platform_device *dev)
+{
+ return mpc52xx_psc_spi_do_remove(&dev->dev);
+}
+
+static struct platform_driver mpc52xx_psc_spi_platform_driver = {
+ .remove = __exit_p(mpc52xx_psc_spi_remove),
+ .driver = {
+ .name = "mpc52xx-psc-spi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mpc52xx_psc_spi_init(void)
+{
+ return platform_driver_probe(&mpc52xx_psc_spi_platform_driver,
+ mpc52xx_psc_spi_probe);
+}
+module_init(mpc52xx_psc_spi_init);
+
+static void __exit mpc52xx_psc_spi_exit(void)
+{
+ platform_driver_unregister(&mpc52xx_psc_spi_platform_driver);
+}
+module_exit(mpc52xx_psc_spi_exit);
+
+#else /* defined(CONFIG_PPC_MERGE) */
+
+static int __init mpc52xx_psc_spi_of_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ const u32 *regaddr_p;
+ u64 regaddr64, size64;
+ s16 id = -1;
+
+ regaddr_p = of_get_address(op->node, 0, &size64, NULL);
+ if (!regaddr_p) {
+ printk(KERN_ERR "Invalid PSC address\n");
+ return -EINVAL;
+ }
+ regaddr64 = of_translate_address(op->node, regaddr_p);
+
+ if (op->dev.platform_data == NULL) {
+ struct device_node *np;
+ int i = 0;
+
+ for_each_node_by_type(np, "spi") {
+ if (of_find_device_by_node(np) == op) {
+ id = i;
+ break;
+ }
+ i++;
+ }
+ }
+
+ return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
+ irq_of_parse_and_map(op->node, 0), id);
+}
+
+static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op)
+{
+ return mpc52xx_psc_spi_do_remove(&op->dev);
+}
+
+static struct of_device_id mpc52xx_psc_spi_of_match[] = {
+ { .type = "spi", .compatible = "mpc52xx-psc-spi", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match);
+
+static struct of_platform_driver mpc52xx_psc_spi_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc52xx-psc-spi",
+ .match_table = mpc52xx_psc_spi_of_match,
+ .probe = mpc52xx_psc_spi_of_probe,
+ .remove = __exit_p(mpc52xx_psc_spi_of_remove),
+ .driver = {
+ .name = "mpc52xx-psc-spi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mpc52xx_psc_spi_init(void)
+{
+ return of_register_platform_driver(&mpc52xx_psc_spi_of_driver);
+}
+module_init(mpc52xx_psc_spi_init);
+
+static void __exit mpc52xx_psc_spi_exit(void)
+{
+ of_unregister_platform_driver(&mpc52xx_psc_spi_of_driver);
+}
+module_exit(mpc52xx_psc_spi_exit);
+
+#endif /* defined(CONFIG_PPC_MERGE) */
+
+MODULE_AUTHOR("Dragos Carp");
+MODULE_DESCRIPTION("MPC52xx PSC SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig
index 7625b18..dd1d6a5 100644
--- a/drivers/telephony/Kconfig
+++ b/drivers/telephony/Kconfig
@@ -3,6 +3,7 @@
#
menu "Telephony Support"
+ depends on HAS_IOMEM
config PHONE
tristate "Linux telephony support"
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 278a22c..15499b7 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -3,6 +3,7 @@
#
menu "USB support"
+ depends on HAS_IOMEM
# Host-side USB depends on having a host controller
# NOTE: dummy_hcd is always an option, but it's ignored here ...
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 8065f2b..f771a7c 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -210,7 +210,7 @@
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9a256d2..4d7485f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -3,6 +3,7 @@
#
menu "Graphics support"
+ depends on HAS_IOMEM
source "drivers/video/backlight/Kconfig"
source "drivers/video/display/Kconfig"
@@ -747,6 +748,22 @@
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+ bool "Frame Buffer in internal SRAM"
+ depends on FB_ATMEL && ARCH_AT91SAM9261
+ help
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
@@ -779,6 +796,15 @@
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
depends on FB_NVIDIA
@@ -818,7 +844,7 @@
here.
config FB_RIVA_DEBUG
- bool "Lots of debug output from Riva(nVidia) driver"
+ bool "Lots of debug output"
depends on FB_RIVA
default n
help
@@ -1430,8 +1456,11 @@
and ICS 5342 RAMDAC.
config FB_PM3
- tristate "Permedia3 support"
- depends on FB && PCI && BROKEN
+ tristate "Permedia3 support (EXPERIMENTAL)"
+ depends on FB && PCI && EXPERIMENTAL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
@@ -1506,7 +1535,7 @@
config FB_XVR500
bool "Sun XVR-500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
+ depends on (FB = y) && PCI && SPARC64
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1519,7 +1548,7 @@
config FB_XVR2500
bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
+ depends on (FB = y) && PCI && SPARC64
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0b70567..bd8b052 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -87,6 +87,7 @@
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
new file mode 100644
index 0000000..e1d5bd0
--- /dev/null
+++ b/drivers/video/atmel_lcdfb.c
@@ -0,0 +1,752 @@
+/*
+ * Driver for AT91/AT32 LCD Controller
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+
+#include <video/atmel_lcdc.h>
+
+#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
+#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
+
+/* configurable parameters */
+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+#define ATMEL_LCDC_DMA_BURST_LEN 8
+
+#if defined(CONFIG_ARCH_AT91SAM9263)
+#define ATMEL_LCDC_FIFO_SIZE 2048
+#else
+#define ATMEL_LCDC_FIFO_SIZE 512
+#endif
+
+#if defined(CONFIG_ARCH_AT91)
+#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
+
+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+{
+
+}
+#elif defined(CONFIG_AVR32)
+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
+ | FBINFO_PARTIAL_PAN_OK \
+ | FBINFO_HWACCEL_XPAN \
+ | FBINFO_HWACCEL_YPAN)
+
+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+{
+ u32 dma2dcfg;
+ u32 pixeloff;
+
+ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
+
+ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
+ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
+ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
+
+ /* Update configuration */
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
+ lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
+ | ATMEL_LCDC_DMAUPDT);
+}
+#endif
+
+
+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+
+static void atmel_lcdfb_update_dma(struct fb_info *info,
+ struct fb_var_screeninfo *var)
+{
+ struct atmel_lcdfb_info *sinfo = info->par;
+ struct fb_fix_screeninfo *fix = &info->fix;
+ unsigned long dma_addr;
+
+ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
+ + var->xoffset * var->bits_per_pixel / 8);
+
+ dma_addr &= ~3UL;
+
+ /* Set framebuffer DMA base address and pixel offset */
+ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
+
+ atmel_lcdfb_update_dma2d(sinfo, var);
+}
+
+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+ struct fb_info *info = sinfo->info;
+
+ dma_free_writecombine(info->device, info->fix.smem_len,
+ info->screen_base, info->fix.smem_start);
+}
+
+/**
+ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
+ * @sinfo: the frame buffer to allocate memory for
+ */
+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+ struct fb_info *info = sinfo->info;
+ struct fb_var_screeninfo *var = &info->var;
+
+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
+ * ((var->bits_per_pixel + 7) / 8));
+
+ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
+ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
+
+ if (!info->screen_base) {
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * atmel_lcdfb_check_var - Validates a var passed in.
+ * @var: frame buffer variable screen structure
+ * @info: frame buffer structure that represents a single frame buffer
+ *
+ * Checks to see if the hardware supports the state requested by
+ * var passed in. This function does not alter the hardware
+ * state!!! This means the data stored in struct fb_info and
+ * struct atmel_lcdfb_info do not change. This includes the var
+ * inside of struct fb_info. Do NOT change these. This function
+ * can be called on its own if we intent to only test a mode and
+ * not actually set it. The stuff in modedb.c is a example of
+ * this. If the var passed in is slightly off by what the
+ * hardware can support then we alter the var PASSED in to what
+ * we can do. If the hardware doesn't support mode change a
+ * -EINVAL will be returned by the upper layers. You don't need
+ * to implement this function then. If you hardware doesn't
+ * support changing the resolution then this function is not
+ * needed. In this case the driver would just provide a var that
+ * represents the static state the screen is in.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct device *dev = info->device;
+ struct atmel_lcdfb_info *sinfo = info->par;
+ unsigned long clk_value_khz;
+
+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+ dev_dbg(dev, "%s:\n", __func__);
+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
+ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
+ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
+
+ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
+ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
+ return -EINVAL;
+ }
+
+ /* Force same alignment for each line */
+ var->xres = (var->xres + 3) & ~3UL;
+ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
+
+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+ var->transp.offset = var->transp.length = 0;
+ var->xoffset = var->yoffset = 0;
+
+ switch (var->bits_per_pixel) {
+ case 2:
+ case 4:
+ case 8:
+ var->red.offset = var->green.offset = var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length
+ = var->bits_per_pixel;
+ break;
+ case 15:
+ case 16:
+ var->red.offset = 0;
+ var->green.offset = 5;
+ var->blue.offset = 10;
+ var->red.length = var->green.length = var->blue.length = 5;
+ break;
+ case 24:
+ case 32:
+ var->red.offset = 0;
+ var->green.offset = 8;
+ var->blue.offset = 16;
+ var->red.length = var->green.length = var->blue.length = 8;
+ break;
+ default:
+ dev_err(dev, "color depth %d not supported\n",
+ var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * atmel_lcdfb_set_par - Alters the hardware state.
+ * @info: frame buffer structure that represents a single frame buffer
+ *
+ * Using the fb_var_screeninfo in fb_info we set the resolution
+ * of the this particular framebuffer. This function alters the
+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
+ * not alter var in fb_info since we are using that data. This
+ * means we depend on the data in var inside fb_info to be
+ * supported by the hardware. atmel_lcdfb_check_var is always called
+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
+ * change the resolution you don't need this function.
+ *
+ */
+static int atmel_lcdfb_set_par(struct fb_info *info)
+{
+ struct atmel_lcdfb_info *sinfo = info->par;
+ unsigned long value;
+ unsigned long clk_value_khz;
+
+ dev_dbg(info->device, "%s:\n", __func__);
+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
+ info->var.xres, info->var.yres,
+ info->var.xres_virtual, info->var.yres_virtual);
+
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+
+ if (info->var.bits_per_pixel <= 8)
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
+
+ /* Re-initialize the DMA engine... */
+ dev_dbg(info->device, " * update DMA engine\n");
+ atmel_lcdfb_update_dma(info, &info->var);
+
+ /* ...set frame size and burst length = 8 words (?) */
+ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
+ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
+
+ /* Now, the LCDC core... */
+
+ /* Set pixel clock */
+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
+
+ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+ value++;
+
+ value = (value / 2) - 1;
+
+ if (value <= 0) {
+ dev_notice(info->device, "Bypassing pixel clock divider\n");
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+ } else
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
+
+ /* Initialize control register 2 */
+ value = sinfo->default_lcdcon2;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+ value |= ATMEL_LCDC_INVLINE_INVERTED;
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
+
+ switch (info->var.bits_per_pixel) {
+ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
+ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
+ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
+ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
+ case 15: /* fall through */
+ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
+ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
+ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
+ default: BUG(); break;
+ }
+ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
+
+ /* Vertical timing */
+ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
+ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
+ value |= info->var.lower_margin;
+ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
+
+ /* Horizontal timing */
+ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
+ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
+ value |= (info->var.left_margin - 1);
+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+
+ /* Display size */
+ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ value |= info->var.yres - 1;
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+
+ /* FIFO Threshold: Use formula from data sheet */
+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
+ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
+
+ /* Toggle LCD_MODE every frame */
+ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
+
+ /* Disable all interrupts */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
+ /* Set contrast */
+ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+ /* ...wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+
+ dev_dbg(info->device, " * re-enable DMA engine\n");
+ /* ...and enable it with updated configuration */
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+
+ dev_dbg(info->device, " * re-enable LCDC core\n");
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+
+ dev_dbg(info->device, " * DONE\n");
+
+ return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+/**
+ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
+ * @regno: Which register in the CLUT we are programming
+ * @red: The red value which can be up to 16 bits wide
+ * @green: The green value which can be up to 16 bits wide
+ * @blue: The blue value which can be up to 16 bits wide.
+ * @transp: If supported the alpha value which can be up to 16 bits wide.
+ * @info: frame buffer info structure
+ *
+ * Set a single color register. The values supplied have a 16 bit
+ * magnitude which needs to be scaled in this function for the hardware.
+ * Things to take into consideration are how many color registers, if
+ * any, are supported with the current color visual. With truecolor mode
+ * no color palettes are supported. Here a psuedo palette is created
+ * which we store the value in pseudo_palette in struct fb_info. For
+ * pseudocolor mode we have a limited color palette. To deal with this
+ * we can program what color is displayed for a particular pixel value.
+ * DirectColor is similar in that we can program each color field. If
+ * we have a static colormap we don't need to implement this function.
+ *
+ * Returns negative errno on error, or zero on success. In an
+ * ideal world, this would have been the case, but as it turns
+ * out, the other drivers return 1 on failure, so that's what
+ * we're going to do.
+ */
+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
+ unsigned int green, unsigned int blue,
+ unsigned int transp, struct fb_info *info)
+{
+ struct atmel_lcdfb_info *sinfo = info->par;
+ unsigned int val;
+ u32 *pal;
+ int ret = 1;
+
+ if (info->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green
+ + 7471 * blue) >> 16;
+
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ if (regno < 16) {
+ pal = info->pseudo_palette;
+
+ val = chan_to_field(red, &info->var.red);
+ val |= chan_to_field(green, &info->var.green);
+ val |= chan_to_field(blue, &info->var.blue);
+
+ pal[regno] = val;
+ ret = 0;
+ }
+ break;
+
+ case FB_VISUAL_PSEUDOCOLOR:
+ if (regno < 256) {
+ val = ((red >> 11) & 0x001f);
+ val |= ((green >> 6) & 0x03e0);
+ val |= ((blue >> 1) & 0x7c00);
+
+ /*
+ * TODO: intensity bit. Maybe something like
+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
+ */
+
+ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
+ ret = 0;
+ }
+ break;
+ }
+
+ return ret;
+}
+
+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ dev_dbg(info->device, "%s\n", __func__);
+
+ atmel_lcdfb_update_dma(info, var);
+
+ return 0;
+}
+
+static struct fb_ops atmel_lcdfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = atmel_lcdfb_check_var,
+ .fb_set_par = atmel_lcdfb_set_par,
+ .fb_setcolreg = atmel_lcdfb_setcolreg,
+ .fb_pan_display = atmel_lcdfb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
+{
+ struct fb_info *info = dev_id;
+ struct atmel_lcdfb_info *sinfo = info->par;
+ u32 status;
+
+ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
+ return IRQ_HANDLED;
+}
+
+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
+{
+ struct fb_info *info = sinfo->info;
+ int ret = 0;
+
+ memset_io(info->screen_base, 0, info->fix.smem_len);
+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+ dev_info(info->device,
+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
+ (unsigned long)info->fix.smem_len / 1024,
+ (unsigned long)info->fix.smem_start,
+ info->screen_base);
+
+ /* Allocate colormap */
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (ret < 0)
+ dev_err(info->device, "Alloc color map failed\n");
+
+ return ret;
+}
+
+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
+{
+ if (sinfo->bus_clk)
+ clk_enable(sinfo->bus_clk);
+ clk_enable(sinfo->lcdc_clk);
+}
+
+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
+{
+ if (sinfo->bus_clk)
+ clk_disable(sinfo->bus_clk);
+ clk_disable(sinfo->lcdc_clk);
+}
+
+
+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct fb_info *info;
+ struct atmel_lcdfb_info *sinfo;
+ struct atmel_lcdfb_info *pdata_sinfo;
+ struct resource *regs = NULL;
+ struct resource *map = NULL;
+ int ret;
+
+ dev_dbg(dev, "%s BEGIN\n", __func__);
+
+ ret = -ENOMEM;
+ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
+ if (!info) {
+ dev_err(dev, "cannot allocate memory\n");
+ goto out;
+ }
+
+ sinfo = info->par;
+
+ if (dev->platform_data) {
+ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
+ sinfo->default_bpp = pdata_sinfo->default_bpp;
+ sinfo->default_dmacon = pdata_sinfo->default_dmacon;
+ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
+ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
+ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
+ sinfo->guard_time = pdata_sinfo->guard_time;
+ } else {
+ dev_err(dev, "cannot get default configuration\n");
+ goto free_info;
+ }
+ sinfo->info = info;
+ sinfo->pdev = pdev;
+
+ strcpy(info->fix.id, sinfo->pdev->name);
+ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
+ info->pseudo_palette = sinfo->pseudo_palette;
+ info->fbops = &atmel_lcdfb_ops;
+
+ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
+ info->fix = atmel_lcdfb_fix;
+
+ /* Enable LCDC Clocks */
+ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
+ sinfo->bus_clk = clk_get(dev, "hck1");
+ if (IS_ERR(sinfo->bus_clk)) {
+ ret = PTR_ERR(sinfo->bus_clk);
+ goto free_info;
+ }
+ }
+ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
+ if (IS_ERR(sinfo->lcdc_clk)) {
+ ret = PTR_ERR(sinfo->lcdc_clk);
+ goto put_bus_clk;
+ }
+ atmel_lcdfb_start_clock(sinfo);
+
+ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
+ info->monspecs.modedb_len, info->monspecs.modedb,
+ sinfo->default_bpp);
+ if (!ret) {
+ dev_err(dev, "no suitable video mode found\n");
+ goto stop_clk;
+ }
+
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(dev, "resources unusable\n");
+ ret = -ENXIO;
+ goto stop_clk;
+ }
+
+ sinfo->irq_base = platform_get_irq(pdev, 0);
+ if (sinfo->irq_base < 0) {
+ dev_err(dev, "unable to get irq\n");
+ ret = sinfo->irq_base;
+ goto stop_clk;
+ }
+
+ /* Initialize video memory */
+ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (map) {
+ /* use a pre-allocated memory buffer */
+ info->fix.smem_start = map->start;
+ info->fix.smem_len = map->end - map->start + 1;
+ if (!request_mem_region(info->fix.smem_start,
+ info->fix.smem_len, pdev->name)) {
+ ret = -EBUSY;
+ goto stop_clk;
+ }
+
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ goto release_intmem;
+ } else {
+ /* alocate memory buffer */
+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
+ if (ret < 0) {
+ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
+ goto stop_clk;
+ }
+ }
+
+ /* LCDC registers */
+ info->fix.mmio_start = regs->start;
+ info->fix.mmio_len = regs->end - regs->start + 1;
+
+ if (!request_mem_region(info->fix.mmio_start,
+ info->fix.mmio_len, pdev->name)) {
+ ret = -EBUSY;
+ goto free_fb;
+ }
+
+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
+ if (!sinfo->mmio) {
+ dev_err(dev, "cannot map LCDC registers\n");
+ goto release_mem;
+ }
+
+ /* interrupt */
+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+ if (ret) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ goto unmap_mmio;
+ }
+
+ ret = atmel_lcdfb_init_fbinfo(sinfo);
+ if (ret < 0) {
+ dev_err(dev, "init fbinfo failed: %d\n", ret);
+ goto unregister_irqs;
+ }
+
+ /*
+ * This makes sure that our colour bitfield
+ * descriptors are correctly initialised.
+ */
+ atmel_lcdfb_check_var(&info->var, info);
+
+ ret = fb_set_var(info, &info->var);
+ if (ret) {
+ dev_warn(dev, "unable to set display parameters\n");
+ goto free_cmap;
+ }
+
+ dev_set_drvdata(dev, info);
+
+ /*
+ * Tell the world that we're ready to go
+ */
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
+ goto free_cmap;
+ }
+
+ /* Power up the LCDC screen */
+ if (sinfo->atmel_lcdfb_power_control)
+ sinfo->atmel_lcdfb_power_control(1);
+
+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
+ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
+
+ return 0;
+
+
+free_cmap:
+ fb_dealloc_cmap(&info->cmap);
+unregister_irqs:
+ free_irq(sinfo->irq_base, info);
+unmap_mmio:
+ iounmap(sinfo->mmio);
+release_mem:
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+free_fb:
+ if (map)
+ iounmap(info->screen_base);
+ else
+ atmel_lcdfb_free_video_memory(sinfo);
+
+release_intmem:
+ if (map)
+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
+stop_clk:
+ atmel_lcdfb_stop_clock(sinfo);
+ clk_put(sinfo->lcdc_clk);
+put_bus_clk:
+ if (sinfo->bus_clk)
+ clk_put(sinfo->bus_clk);
+free_info:
+ framebuffer_release(info);
+out:
+ dev_dbg(dev, "%s FAILED\n", __func__);
+ return ret;
+}
+
+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct atmel_lcdfb_info *sinfo = info->par;
+
+ if (!sinfo)
+ return 0;
+
+ if (sinfo->atmel_lcdfb_power_control)
+ sinfo->atmel_lcdfb_power_control(0);
+ unregister_framebuffer(info);
+ atmel_lcdfb_stop_clock(sinfo);
+ clk_put(sinfo->lcdc_clk);
+ if (sinfo->bus_clk)
+ clk_put(sinfo->bus_clk);
+ fb_dealloc_cmap(&info->cmap);
+ free_irq(sinfo->irq_base, info);
+ iounmap(sinfo->mmio);
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
+ iounmap(info->screen_base);
+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
+ } else {
+ atmel_lcdfb_free_video_memory(sinfo);
+ }
+
+ dev_set_drvdata(dev, NULL);
+ framebuffer_release(info);
+
+ return 0;
+}
+
+static struct platform_driver atmel_lcdfb_driver = {
+ .remove = __exit_p(atmel_lcdfb_remove),
+ .driver = {
+ .name = "atmel_lcdfb",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init atmel_lcdfb_init(void)
+{
+ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
+}
+
+static void __exit atmel_lcdfb_exit(void)
+{
+ platform_driver_unregister(&atmel_lcdfb_driver);
+}
+
+module_init(atmel_lcdfb_init);
+module_exit(atmel_lcdfb_exit);
+
+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index aa3935d..63b85bf 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -19,13 +19,6 @@
Say Y.
-# if [ "$CONFIG_PCI" = "y" -a "$CONFIG_VGA_CONSOLE" = "y" ]; then
-# bool ' Allow VGA on any bus?' CONFIG_VGA_HOSE
-# if [ "$CONFIG_VGA_HOSE" = "y" ]; then
-# define_bool CONFIG_DUMMY_CONSOLE y
-# fi
-# fi
-
config VGACON_SOFT_SCROLLBACK
bool "Enable Scrollback Buffer in System RAM"
depends on VGA_CONSOLE
diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c
index c627955..aff11bb 100644
--- a/drivers/video/nvidia/nv_hw.c
+++ b/drivers/video/nvidia/nv_hw.c
@@ -149,7 +149,9 @@
pll = NV_RD32(par->PMC, 0x4024);
M = pll & 0xFF;
N = (pll >> 8) & 0xFF;
- if (((par->Chipset & 0xfff0) == 0x0290) || ((par->Chipset & 0xfff0) == 0x0390) || ((par->Chipset & 0xfff0) == 0x02E0)) {
+ if (((par->Chipset & 0xfff0) == 0x0290) ||
+ ((par->Chipset & 0xfff0) == 0x0390) ||
+ ((par->Chipset & 0xfff0) == 0x02E0)) {
MB = 1;
NB = 1;
} else {
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index f85edf0..41f6365 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -37,7 +37,6 @@
#include "nv_proto.h"
#include "nv_dma.h"
-#undef CONFIG_FB_NVIDIA_DEBUG
#ifdef CONFIG_FB_NVIDIA_DEBUG
#define NVTRACE printk
#else
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 1ac5264..ab5e668 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -204,17 +204,6 @@
}
#endif
-static void wait_pm2(struct pm2fb_par* par) {
-
- WAIT_FIFO(par, 1);
- pm2_WR(par, PM2R_SYNC, 0);
- mb();
- do {
- while (pm2_RD(par, PM2R_OUT_FIFO_WORDS) == 0);
- rmb();
- } while (pm2_RD(par, PM2R_OUT_FIFO) != PM2TAG(PM2R_SYNC));
-}
-
/*
* partial products for the supported horizontal resolutions.
*/
@@ -1050,13 +1039,30 @@
return 0;
}
+static int pm2fb_sync(struct fb_info *info)
+{
+ struct pm2fb_par *par = info->par;
+
+ WAIT_FIFO(par, 1);
+ pm2_WR(par, PM2R_SYNC, 0);
+ mb();
+ do {
+ while (pm2_RD(par, PM2R_OUT_FIFO_WORDS) == 0)
+ udelay(10);
+ rmb();
+ } while (pm2_RD(par, PM2R_OUT_FIFO) != PM2TAG(PM2R_SYNC));
+
+ return 0;
+}
+
/*
* block operation. copy=0: rectangle fill, copy=1: rectangle copy.
*/
-static void pm2fb_block_op(struct pm2fb_par* par, int copy,
+static void pm2fb_block_op(struct fb_info* info, int copy,
s32 xsrc, s32 ysrc,
s32 x, s32 y, s32 w, s32 h,
u32 color) {
+ struct pm2fb_par *par = info->par;
if (!w || !h)
return;
@@ -1076,13 +1082,11 @@
(x<xsrc ? PM2F_INCREASE_X : 0) |
(y<ysrc ? PM2F_INCREASE_Y : 0) |
(copy ? 0 : PM2F_RENDER_FASTFILL));
- wait_pm2(par);
}
static void pm2fb_fillrect (struct fb_info *info,
const struct fb_fillrect *region)
{
- struct pm2fb_par *par = info->par;
struct fb_fillrect modded;
int vxres, vyres;
u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ?
@@ -1116,7 +1120,7 @@
color |= color << 16;
if(info->var.bits_per_pixel != 24)
- pm2fb_block_op(par, 0, 0, 0,
+ pm2fb_block_op(info, 0, 0, 0,
modded.dx, modded.dy,
modded.width, modded.height, color);
else
@@ -1126,7 +1130,6 @@
static void pm2fb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
- struct pm2fb_par *par = info->par;
struct fb_copyarea modded;
u32 vxres, vyres;
@@ -1156,7 +1159,7 @@
if(modded.dy + modded.height > vyres)
modded.height = vyres - modded.dy;
- pm2fb_block_op(par, 1, modded.sx, modded.sy,
+ pm2fb_block_op(info, 1, modded.sx, modded.sy,
modded.dx, modded.dy,
modded.width, modded.height, 0);
}
@@ -1177,6 +1180,7 @@
.fb_fillrect = pm2fb_fillrect,
.fb_copyarea = pm2fb_copyarea,
.fb_imageblit = cfb_imageblit,
+ .fb_sync = pm2fb_sync,
};
/*
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index bd787e8..c77a1a1 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -1,55 +1,25 @@
/*
* linux/drivers/video/pm3fb.c -- 3DLabs Permedia3 frame buffer device
- *
- * Copyright (C) 2001 Romain Dolbeau <dolbeau@irisa.fr>
+ *
+ * Copyright (C) 2001 Romain Dolbeau <romain@dolbeau.org>.
+ *
+ * Ported to 2.6 kernel on 1 May 2007 by Krzysztof Helt <krzysztof.h1@wp.pl>
+ * based on pm2fb.c
+ *
* Based on code written by:
- * Sven Luther, <luther@dpt-info.u-strasbg.fr>
- * Alan Hourihane, <alanh@fairlite.demon.co.uk>
- * Russell King, <rmk@arm.linux.org.uk>
+ * Sven Luther, <luther@dpt-info.u-strasbg.fr>
+ * Alan Hourihane, <alanh@fairlite.demon.co.uk>
+ * Russell King, <rmk@arm.linux.org.uk>
* Based on linux/drivers/video/skeletonfb.c:
* Copyright (C) 1997 Geert Uytterhoeven
* Based on linux/driver/video/pm2fb.c:
- * Copyright (C) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
- * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
+ * Copyright (C) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ * Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * $Header: /cvsroot/linux/drivers/video/pm3fb.c,v 1.1 2002/02/25 19:11:06 marcelo Exp $
- *
- * CHANGELOG:
- * Mon Feb 11 10:35:48 MET 2002, v 1.4.11B: Cosmetic update.
- * Wed Jan 23 14:16:59 MET 2002, v 1.4.11: Preliminary 2.5.x support, patch for 2.5.2.
- * Wed Nov 28 11:08:29 MET 2001, v 1.4.10: potential bug fix for SDRAM-based board, patch for 2.4.16.
- * Thu Sep 20 10:24:42 MET DST 2001, v 1.4.9: sync bug fix, preliminary flatpanel support, better timings.
- * Tue Aug 28 10:13:01 MET DST 2001, v 1.4.8: memory timings check, minor bug fixes.
- * Wed Jul 18 19:06:14 CEST 2001, v 1.4.7: Mode fix (800x600-100, 1024x768-100 changed), using HW panning + accel bug fix.
- * Mon Jun 25 10:33:56 MET DST 2001, v 1.4.6: Depth 12 fix, chip reset ioctl, moved memory erase ioctl to DEBUG.
- * Wed Jun 20 11:13:08 MET DST 2001, v 1.4.5: Fixed missing blinking cursor in 8bpp, code cleaning, memory erase IOCTL.
- * Mon Jun 18 16:00:27 CEST 2001, v 1.4.4: Depth 12 (RGBA 4444) support, code cleaning.
- * Fri Jun 15 13:53:01 CEST 2001, v 1.4.3: Removed warnings, depth 15 support, add 'depth' option.
- * Thu Jun 14 10:13:52 MET DST 2001, v 1.4.2: Fixed depth switching bug, preliminary 15bpp (RGB5551) support.
- * Thu Apr 12 11:16:45 MET DST 2001, v 1.4.1B: Doc updates.
- * Fri Apr 6 11:12:53 MET DST 2001, v 1.4.1: Configure.help, minor cleanup
- * Thu Mar 29 10:56:50 MET DST 2001, v 1.4.0: Module & module options support (note: linux patch changed, 2.2.19 added).
- * Thu Mar 15 15:30:31 MET 2001, v 1.3.2: Fixed mirroring bug on little-endian.
- * Wed Mar 14 21:25:54 CET 2001, v 1.3.1: Fixed bug in BlockMove (_bmov).
- * Tue Mar 13 10:53:19 MET 2001, v 1.3.0: Character drawing hardware support (in all width between 1 and 16), fixes.
- * Thu Mar 8 10:20:16 MET 2001, v 1.2.2: Better J2000 support, "font:" option.
- * Tue Mar 6 21:25:04 CET 2001, v 1.2.1: Better acceleration support.
- * Mon Mar 5 21:54:17 CET 2001, v 1.2.0: Partial acceleration support (clear & bmove)
- * Mon Mar 5 12:52:15 CET 2001, v 1.1.3: Big pan_display fix.
- * Sun Mar 4 22:21:50 CET 2001, v 1.1.2: (numerous) bug fixes.
- * Fri Mar 2 15:54:07 CET 2001, v 1.1.1: Might have Appian J2000 support, resource mangement in 2.4
- * Wed Feb 28 18:21:35 CET 2001, v 1.1.0: Might have multiple boards support (added, but not yest tested)
- * Tue Feb 27 17:31:12 CET 2001, v 1.0.6: fixes boot-time mode select, add more default mode
- * Tue Feb 27 14:01:36 CET 2001, v 1.0.5: fixes (1.0.4 was broken for 2.2), cleaning up
- * Mon Feb 26 23:17:36 CET 2001, v 1.0.4: preliminary 2.4.x support, dropped (useless on pm3) partial product, more OF fix
- * Mon Feb 26 20:59:05 CET 2001, v 1.0.3: No more shadow register (and wasted memory), endianess fix, use OF-preset resolution by default
- * Wed Feb 21 22:09:30 CET 2001, v 1.0.2: Code cleaning for future multiboard support, better OF support, bugs fix
- * Wed Feb 21 19:58:56 CET 2001, v 1.0.1: OpenFirmware support, fixed memory detection, better debug support, code cleaning
- * Wed Feb 21 14:47:06 CET 2001, v 1.0.0: First working version
*/
#include <linux/module.h>
@@ -58,856 +28,155 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/vmalloc.h>
#include <linux/delay.h>
-#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/ctype.h>
-#include <video/fbcon.h>
-#include <video/fbcon-mfb.h>
-#include <video/fbcon-cfb2.h>
-#include <video/fbcon-cfb4.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
-#include <video/fbcon-cfb24.h>
-#include <video/fbcon-cfb32.h>
#include <video/pm3fb.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#ifdef CONFIG_FB_OF
-#include <asm/prom.h>
+#if !defined(CONFIG_PCI)
+#error "Only generic PCI cards supported."
#endif
-/* ************************************* */
-/* ***** The various "global" data ***** */
-/* ************************************* */
+#undef PM3FB_MASTER_DEBUG
+#ifdef PM3FB_MASTER_DEBUG
+#define DPRINTK(a,b...) printk(KERN_DEBUG "pm3fb: %s: " a, __FUNCTION__ , ## b)
+#else
+#define DPRINTK(a,b...)
+#endif
-/* those will need a rework for multiple board support */
-/* Driver name */
-static const char permedia3_name[16] = "Permedia3";
+/*
+ * Driver data
+ */
+static char *mode_option __devinitdata;
-/* the fb_par struct, mandatory */
-struct pm3fb_par {
- u32 pixclock; /* pixclock in KHz */
+/*
+ * If your driver supports multiple boards, you should make the
+ * below data types arrays, or allocate them dynamically (using kmalloc()).
+ */
- u32 width; /* width of virtual screen */
- u32 height; /* height of virtual screen */
-
- u32 hsstart; /* horiz. sync start */
- u32 hsend; /* horiz. sync end */
- u32 hbend; /* horiz. blank end (also gate end) */
- u32 htotal; /* total width (w/ sync & blank) */
-
- u32 vsstart; /* vert. sync start */
- u32 vsend; /* vert. sync end */
- u32 vbend; /* vert. blank end */
- u32 vtotal; /* total height (w/ sync & blank) */
-
- u32 stride; /* screen stride */
- u32 base; /* screen base (xoffset+yoffset) in 128 bits unit */
- /* NOTE : unlike other pm3 stuff above, stored *after* shiftbpp. don't ask */
- u32 depth; /* screen depth (8, 12, 15, 16 or 32) */
- u32 video; /* video control (hsync,vsync) */
+/*
+ * This structure defines the hardware state of the graphics card. Normally
+ * you place this in a header file in linux/include/video. This file usually
+ * also includes register information. That allows other driver subsystems
+ * and userland applications the ability to use the same header file to
+ * avoid duplicate work and easy porting of software.
+ */
+struct pm3_par {
+ unsigned char __iomem *v_regs;/* virtual address of p_regs */
+ u32 video; /* video flags before blanking */
+ u32 base; /* screen base (xoffset+yoffset) in 128 bits unit */
+ u32 palette[16];
};
-/* memory timings */
-struct pm3fb_timings
+/*
+ * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
+ * if we don't use modedb. If we do use modedb see pm3fb_init how to use it
+ * to get a fb_var_screeninfo. Otherwise define a default var as well.
+ */
+static struct fb_fix_screeninfo pm3fb_fix __devinitdata = {
+ .id = "Permedia3",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+};
+
+/*
+ * Utility functions
+ */
+
+static inline u32 PM3_READ_REG(struct pm3_par *par, s32 off)
{
- unsigned long caps;
- unsigned long timings;
- unsigned long control;
- unsigned long refresh;
- unsigned long powerdown;
-};
-typedef enum pm3fb_timing_result { pm3fb_timing_ok, pm3fb_timing_problem, pm3fb_timing_retry } pm3fb_timing_result;
-#define PM3FB_UNKNOWN_TIMING_VALUE ((unsigned long)-1)
-#define PM3FB_UNKNOWN_TIMINGS { PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE, PM3FB_UNKNOWN_TIMING_VALUE }
-
-/* the fb_info struct, mandatory */
-struct pm3fb_info {
- struct fb_info_gen gen;
- unsigned long board_num; /* internal board number */
- unsigned long use_current;
- struct pm3fb_par *current_par;
- struct pci_dev *dev; /* PCI device */
- unsigned long board_type; /* index in the cardbase */
- unsigned char *fb_base; /* framebuffer memory base */
- u32 fb_size; /* framebuffer memory size */
- unsigned char *p_fb; /* physical address of frame buffer */
- unsigned char *v_fb; /* virtual address of frame buffer */
- unsigned char *pIOBase; /* physical address of registers region, must be rg_base or rg_base+PM2_REGS_SIZE depending on the host endianness */
- unsigned char *vIOBase; /* address of registers after ioremap() */
- struct {
- u8 transp;
- u8 red;
- u8 green;
- u8 blue;
- } palette[256];
- union {
-#ifdef FBCON_HAS_CFB16
- u16 cmap12[16]; /* RGBA 4444 */
- u16 cmap15[16]; /* RGBA 5551 */
- u16 cmap16[16]; /* RGBA 5650 */
-#endif
-#ifdef FBCON_HAS_CFB32
- u32 cmap32[16];
-#endif
- } cmap;
- struct pm3fb_timings memt;
-};
-
-/* regular resolution database*/
-static struct {
- char name[16];
- struct pm3fb_par user_mode;
-} mode_base[] __initdata = {
- {
- "default-800x600", {
- 49500, 800, 600, 16, 96, 256, 1056, 1, 4, 25, 625,
- 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}}, {
- "1024x768-74", {
- 78752, 1024, 768, 32, 128, 304, 1328, 1, 4, 38,
- 806, 1024, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}}, {
- "1024x768-74-32", {
- 78752, 1024, 768, 32, 128, 304, 1328, 1, 4, 38,
- 806, 1024, 0, 32,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_32BIT}},
-/* Generated mode : "1600x1024", for the SGI 1600SW flat panel*/
- {
- "SGI1600SW", {
- 108000, 1600, 1024, 16, 56, 104, 1704, 3, 6, 32,
- 1056, 1600, 0, 8,
- PM3VideoControl_ENABLE|
- PM3VideoControl_HSYNC_ACTIVE_LOW|PM3VideoControl_VSYNC_ACTIVE_LOW|
- PM3VideoControl_PIXELSIZE_32BIT}},
-/* ##### auto-generated mode, by fbtimings2pm3 */
-/* Generated mode : "640x480-60" */
- {
- "640x480-60", {
- 25174, 640, 480, 16, 112, 160, 800, 10, 12, 45,
- 525, 640, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-72" */
- {
- "640x480-72", {
- 31199, 640, 480, 24, 64, 192, 832, 9, 12, 40, 520,
- 640, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-75" */
- {
- "640x480-75", {
- 31499, 640, 480, 16, 80, 200, 840, 1, 4, 20, 500,
- 640, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-90" */
- {
- "640x480-90", {
- 39909, 640, 480, 32, 72, 192, 832, 25, 39, 53, 533,
- 640, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "640x480-100" */
- {
- "640x480-100", {
- 44899, 640, 480, 32, 160, 208, 848, 22, 34, 51,
- 531, 640, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-48-lace" */
-/* INTERLACED NOT SUPPORTED
- {"800x600-48-lace", {35999, 800, 600, 80, 208, 264, 1064, 11, 23, 102, 702, 800, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}},
- INTERLACED NOT SUPPORTED */
-/* Generated mode : "800x600-56" */
- {
- "800x600-56", {
- 35999, 800, 600, 24, 96, 224, 1024, 1, 3, 25, 625,
- 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-60" */
- {
- "800x600-60", {
- 40000, 800, 600, 40, 168, 256, 1056, 1, 5, 28, 628,
- 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-70" */
- {
- "800x600-70", {
- 44899, 800, 600, 24, 168, 208, 1008, 9, 21, 36,
- 636, 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-72" */
- {
- "800x600-72", {
- 50000, 800, 600, 56, 176, 240, 1040, 37, 43, 66,
- 666, 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-75" */
- {
- "800x600-75", {
- 49497, 800, 600, 16, 96, 256, 1056, 1, 4, 25, 625,
- 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-90" */
- {
- "800x600-90", {
- 56637, 800, 600, 8, 72, 192, 992, 8, 19, 35, 635,
- 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "800x600-100", from /etc/fb.modes */
-/* DISABLED, hsstart == 0
- {
- "800x600-100", {
- 67499, 800, 600, 0, 64, 280, 1080, 7, 11, 25, 625,
- 800, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-*/
-/* Generated mode : "800x600-100", from ??? */
- {
- "800x600-100", {
- 69650, 800, 600, 64, 128, 288, 1088, 4, 10, 40, 640, 800, 0, 8,
- PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_LOW|
- PM3VideoControl_VSYNC_ACTIVE_LOW|PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-43-lace" */
-/* INTERLACED NOT SUPPORTED
- {"1024x768-43-lace", {44899, 1024, 768, 8, 184, 240, 1264, 1, 9, 49, 817, 1024, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}},
- INTERLACED NOT SUPPORTED */
-/* Generated mode : "1024x768-60" */
- {
- "1024x768-60", {
- 64998, 1024, 768, 24, 160, 320, 1344, 3, 9, 38,
- 806, 1024, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-70" */
- {
- "1024x768-70", {
- 74996, 1024, 768, 24, 160, 304, 1328, 3, 9, 38,
- 806, 1024, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-72" */
- {
- "1024x768-72", {
- 74996, 10224, 768, 24, 160, 264, 10488, 3, 9, 38,
- 806, 10224, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-75" */
- {
- "1024x768-75", {
- 78746, 1024, 768, 16, 112, 288, 1312, 1, 4, 32,
- 800, 1024, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-90" */
- {
- "1024x768-90", {
- 100000, 1024, 768, 0, 96, 288, 1312, 21, 36, 77,
- 845, 1024, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1024x768-100", from /etc/fb.modes */
-/* DISABLED, vsstart == 0
- {
- "1024x768-100", {
- 109998, 1024, 768, 0, 88, 368, 1392, 0, 8, 24, 792,
- 1024, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-*/
-/* Generated mode : "1024x768-100", from ??? */
- {
- "1024x768-100", {
- 115500, 1024, 768, 32, 224, 416, 1440, 3, 13, 34, 802, 1024, 0, 8,
- PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_LOW|
- PM3VideoControl_VSYNC_ACTIVE_LOW|PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-43-lace" */
-/* INTERLACED NOT SUPPORTED
- {"1152x864-43-lace", {64998, 1152, 864, 72, 200, 264, 1416, 78, 87, 191, 1055, 1152, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}},
- INTERLACED NOT SUPPORTED */
-/* Generated mode : "1152x864-47-lace" */
-/* INTERLACED NOT SUPPORTED
- {"1152x864-47-lace", {64998, 1152, 864, 88, 216, 296, 1448, 30, 39, 83, 947, 1152, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}},
- INTERLACED NOT SUPPORTED */
-/* Generated mode : "1152x864-60" */
- {
- "1152x864-60", {
- 80000, 1152, 864, 64, 176, 304, 1456, 6, 11, 52,
- 916, 1152, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-70" */
- {
- "1152x864-70", {
- 100000, 1152, 864, 40, 192, 360, 1512, 13, 24, 81,
- 945, 1152, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-75" */
- {
- "1152x864-75", {
- 109998, 1152, 864, 24, 168, 312, 1464, 45, 53, 138,
- 1002, 1152, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1152x864-80" */
- {
- "1152x864-80", {
- 109998, 1152, 864, 16, 128, 288, 1440, 30, 37, 94,
- 958, 1152, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-43-lace" */
-/* INTERLACED NOT SUPPORTED
- {"1280x1024-43-lace", {80000, 1024, 1024, 80, 160, 320, 1344, 50, 60, 125, 1149, 1024, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}},
- INTERLACED NOT SUPPORTED */
-/* Generated mode : "1280x1024-47-lace" */
-/* INTERLACED NOT SUPPORTED
- {"1280x1024-47-lace", {80000, 1280, 1024, 80, 160, 320, 1600, 1, 11, 29, 1053, 1280, 0, 8, PM3VideoControl_ENABLE|PM3VideoControl_HSYNC_ACTIVE_HIGH|PM3VideoControl_VSYNC_ACTIVE_HIGH|PM3VideoControl_PIXELSIZE_8BIT}},
- INTERLACED NOT SUPPORTED */
-/* Generated mode : "1280x1024-60" */
- {
- "1280x1024-60", {
- 107991, 1280, 1024, 48, 160, 408, 1688, 1, 4, 42,
- 1066, 1280, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-70" */
- {
- "1280x1024-70", {
- 125992, 1280, 1024, 80, 192, 408, 1688, 1, 6, 42,
- 1066, 1280, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-74" */
- {
- "1280x1024-74", {
- 134989, 1280, 1024, 32, 176, 432, 1712, 0, 30, 40,
- 1064, 1280, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1280x1024-75" */
- {
- "1280x1024-75", {
- 134989, 1280, 1024, 16, 160, 408, 1688, 1, 4, 42,
- 1066, 1280, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_HIGH
- |
- PM3VideoControl_VSYNC_ACTIVE_HIGH
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1600x1200-60" */
- {
- "1600x1200-60", {
- 155981, 1600, 1200, 32, 192, 448, 2048, 10, 18, 70,
- 1270, 1600, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1600x1200-66" */
- {
- "1600x1200-66", {
- 171998, 1600, 1200, 40, 176, 480, 2080, 3, 6, 53,
- 1253, 1600, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* Generated mode : "1600x1200-76" */
- {
- "1600x1200-76", {
- 197980, 1600, 1200, 40, 176, 480, 2080, 3, 8, 50,
- 1250, 1600, 0, 8,
- PM3VideoControl_ENABLE |
- PM3VideoControl_HSYNC_ACTIVE_LOW
- |
- PM3VideoControl_VSYNC_ACTIVE_LOW
- | PM3VideoControl_PIXELSIZE_8BIT}},
-/* ##### end of auto-generated mode */
- {
- "\0",}
-};
-
-/* more mandatory stuff (see skeletonfb.c + framebuffer driver HOWTO */
-static struct pm3fb_info fb_info[PM3_MAX_BOARD];
-static struct pm3fb_par current_par[PM3_MAX_BOARD];
-static int current_par_valid[PM3_MAX_BOARD];
-/* to allow explicit filtering of board */
-short bus[PM3_MAX_BOARD];
-short slot[PM3_MAX_BOARD];
-short func[PM3_MAX_BOARD];
-short disable[PM3_MAX_BOARD];
-short noaccel[PM3_MAX_BOARD];
-char fontn[PM3_MAX_BOARD][PM3_FONTNAME_SIZE];
-short depth[PM3_MAX_BOARD];
-short flatpanel[PM3_MAX_BOARD];
-static struct display disp[PM3_MAX_BOARD];
-static char g_options[PM3_OPTIONS_SIZE] __initdata = "pm3fb,dummy";
-short printtimings = 0;
-short forcesize[PM3_MAX_BOARD];
-
-/* ********************* */
-/* ***** prototype ***** */
-/* ********************* */
-/* card-specific */
-static void pm3fb_j2000_setup(struct pm3fb_info *l_fb_info);
-/* permedia3-specific */
-static pm3fb_timing_result pm3fb_preserve_memory_timings(struct pm3fb_info *l_fb_info);
-static pm3fb_timing_result pm3fb_try_memory_timings(struct pm3fb_info *l_fb_info);
-static void pm3fb_write_memory_timings(struct pm3fb_info *l_fb_info);
-static unsigned long pm3fb_read_dac_reg(struct pm3fb_info *l_fb_info,
- unsigned long r);
-static unsigned long pm3fb_CalculateClock(struct pm3fb_info *l_fb_info, unsigned long reqclock, /* In kHz units */
- unsigned long refclock, /* In kHz units */
- unsigned char *prescale, /* ClkPreScale */
- unsigned char *feedback, /* ClkFeedBackScale */
- unsigned char *postscale
- /* ClkPostScale */ );
-static void pm3fb_clear_memory(struct pm3fb_info *l_fb_info, u32 cc);
-static void pm3fb_clear_colormap(struct pm3fb_info *l_fb_info, unsigned char r, unsigned char g, unsigned char b);
-static void pm3fb_common_init(struct pm3fb_info *l_fb_info);
-static int pm3fb_Shiftbpp(struct pm3fb_info *l_fb_info,
- unsigned long depth, int v);
-static int pm3fb_Unshiftbpp(struct pm3fb_info *l_fb_info,
- unsigned long depth, int v);
-static void pm3fb_mapIO(struct pm3fb_info *l_fb_info);
-static void pm3fb_unmapIO(struct pm3fb_info *l_fb_info);
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
-static void pm3fb_show_cur_mode(struct pm3fb_info *l_fb_info);
-#endif
-static void pm3fb_show_cur_timing(struct pm3fb_info *l_fb_info);
-static void pm3fb_write_mode(struct pm3fb_info *l_fb_info);
-static void pm3fb_read_mode(struct pm3fb_info *l_fb_info,
- struct pm3fb_par *curpar);
-static unsigned long pm3fb_size_memory(struct pm3fb_info *l_fb_info);
-/* accelerated permedia3-specific */
-#ifdef PM3FB_USE_ACCEL
-static void pm3fb_wait_pm3(struct pm3fb_info *l_fb_info);
-static void pm3fb_init_engine(struct pm3fb_info *l_fb_info);
-#ifdef FBCON_HAS_CFB32
-static void pm3fb_cfb32_clear(struct vc_data *conp,
- struct display *p,
- int sy, int sx, int height, int width);
-static void pm3fb_cfb32_clear_margins(struct vc_data *conp,
- struct display *p, int bottom_only);
-#endif /* FBCON_HAS_CFB32 */
-#ifdef FBCON_HAS_CFB16
-static void pm3fb_cfb16_clear(struct vc_data *conp,
- struct display *p,
- int sy, int sx, int height, int width);
-static void pm3fb_cfb16_clear_margins(struct vc_data *conp,
- struct display *p, int bottom_only);
-#endif /* FBCON_HAS_CFB16 */
-#ifdef FBCON_HAS_CFB8
-static void pm3fb_cfb8_clear(struct vc_data *conp,
- struct display *p,
- int sy, int sx, int height, int width);
-static void pm3fb_cfb8_clear_margins(struct vc_data *conp,
- struct display *p, int bottom_only);
-#endif /* FBCON_HAS_CFB8 */
-#if defined(FBCON_HAS_CFB8) || defined(FBCON_HAS_CFB16) || defined(FBCON_HAS_CFB32)
-static void pm3fb_cfbX_bmove(struct display *p,
- int sy, int sx,
- int dy, int dx, int height, int width);
-static void pm3fb_cfbX_putc(struct vc_data *conp, struct display *p,
- int c, int yy, int xx);
-static void pm3fb_cfbX_putcs(struct vc_data *conp, struct display *p,
- const unsigned short *s, int count, int yy,
- int xx);
-static void pm3fb_cfbX_revc(struct display *p, int xx, int yy);
-#endif /* FBCON_HAS_CFB8 || FBCON_HAS_CFB16 || FBCON_HAS_CFB32 */
-#endif /* PM3FB_USE_ACCEL */
-/* pre-init */
-static void pm3fb_mode_setup(char *mode, unsigned long board_num);
-static void pm3fb_pciid_setup(char *pciid, unsigned long board_num);
-static char *pm3fb_boardnum_setup(char *options, unsigned long *bn);
-static void pm3fb_real_setup(char *options);
-/* fbdev */
-static int pm3fb_encode_fix(struct fb_fix_screeninfo *fix,
- const void *par, struct fb_info_gen *info);
-static int pm3fb_decode_var(const struct fb_var_screeninfo *var,
- void *par, struct fb_info_gen *info);
-static void pm3fb_encode_depth(struct fb_var_screeninfo *var, long d);
-static int pm3fb_encode_var(struct fb_var_screeninfo *var,
- const void *par, struct fb_info_gen *info);
-static void pm3fb_get_par(void *par, struct fb_info_gen *info);
-static void pm3fb_set_par(const void *par, struct fb_info_gen *info);
-static void pm3fb_set_color(struct pm3fb_info *l_fb_info,
- unsigned char regno, unsigned char r,
- unsigned char g, unsigned char b);
-static int pm3fb_getcolreg(unsigned regno, unsigned *red, unsigned *green,
- unsigned *blue, unsigned *transp,
- struct fb_info *info);
-static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
- unsigned blue, unsigned transp,
- struct fb_info *info);
-static int pm3fb_blank(int blank_mode, struct fb_info_gen *info);
-static void pm3fb_set_disp(const void *par, struct display *disp,
- struct fb_info_gen *info);
-static void pm3fb_detect(void);
-static int pm3fb_pan_display(const struct fb_var_screeninfo *var,
- struct fb_info_gen *info);
-static int pm3fb_ioctl(struct fb_info *info, u_int cmd, u_long arg);
-
-
-/* the struct that hold them together */
-struct fbgen_hwswitch pm3fb_switch = {
- pm3fb_detect, pm3fb_encode_fix, pm3fb_decode_var, pm3fb_encode_var,
- pm3fb_get_par, pm3fb_set_par, pm3fb_getcolreg,
- pm3fb_pan_display, pm3fb_blank, pm3fb_set_disp
-};
-
-static struct fb_ops pm3fb_ops = {
- .owner = THIS_MODULE,
- .fb_get_fix = fbgen_get_fix,
- .fb_get_var = fbgen_get_var,
- .fb_set_var = fbgen_set_var,
- .fb_get_cmap = fbgen_get_cmap,
- .fb_set_cmap = fbgen_set_cmap,
- .fb_setcolreg = pm3fb_setcolreg,
- .fb_pan_display =fbgen_pan_display,
- .fb_blank = fbgen_blank,
- .fb_ioctl = pm3fb_ioctl,
-};
-
-#ifdef PM3FB_USE_ACCEL
-#ifdef FBCON_HAS_CFB32
-static struct display_switch pm3fb_cfb32 = {
- fbcon_cfb32_setup, pm3fb_cfbX_bmove, pm3fb_cfb32_clear,
- pm3fb_cfbX_putc, pm3fb_cfbX_putcs, pm3fb_cfbX_revc,
- NULL /* cursor() */ , NULL /* set_font() */ ,
- pm3fb_cfb32_clear_margins,
- FONTWIDTHRANGE(1, 16) /* true only if accelerated... */
-};
-#endif /* FBCON_HAS_CFB32 */
-#ifdef FBCON_HAS_CFB16
-static struct display_switch pm3fb_cfb16 = {
- fbcon_cfb16_setup, pm3fb_cfbX_bmove, pm3fb_cfb16_clear,
- pm3fb_cfbX_putc, pm3fb_cfbX_putcs, pm3fb_cfbX_revc,
- NULL /* cursor() */ , NULL /* set_font() */ ,
- pm3fb_cfb16_clear_margins,
- FONTWIDTHRANGE(1, 16) /* true only if accelerated... */
-};
-#endif /* FBCON_HAS_CFB16 */
-#ifdef FBCON_HAS_CFB8
-static struct display_switch pm3fb_cfb8 = {
- fbcon_cfb8_setup, pm3fb_cfbX_bmove, pm3fb_cfb8_clear,
- pm3fb_cfbX_putc, pm3fb_cfbX_putcs, pm3fb_cfbX_revc,
- NULL /* cursor() */ , NULL /* set_font() */ ,
- pm3fb_cfb8_clear_margins,
- FONTWIDTHRANGE(1, 16) /* true only if accelerated... */
-};
-#endif /* FBCON_HAS_CFB8 */
-#endif /* PM3FB_USE_ACCEL */
-
-/* ****************************** */
-/* ***** card-specific data ***** */
-/* ****************************** */
-struct pm3fb_card_timings {
- unsigned long memsize; /* 0 for last value (i.e. default) */
- struct pm3fb_timings memt;
-};
-
-static struct pm3fb_card_timings t_FormacProFormance3[] = {
- { 16, { 0x02e311b8, 0x06100205, 0x08000002, 0x00000079, 0x00000000} },
- { 0, { 0x02e311b8, 0x06100205, 0x08000002, 0x00000079, 0x00000000} } /* from 16 MB PF3 */
-};
-
-static struct pm3fb_card_timings t_AppianJeronimo2000[] = {
- { 32, { 0x02e311B8, 0x07424905, 0x0c000003, 0x00000061, 0x00000000} },
- { 0, { 0x02e311B8, 0x07424905, 0x0c000003, 0x00000061, 0x00000000} } /* from 32MB J2000 */
-};
-
-static struct pm3fb_card_timings t_3DLabsOxygenVX1[] = {
- { 32, { 0x30e311b8, 0x08501204, 0x08000002, 0x0000006b, 0x00000000} },
- { 0, { 0x30e311b8, 0x08501204, 0x08000002, 0x0000006b, 0x00000000} } /* from 32MB VX1 */
-};
-
-static struct {
- char cardname[32]; /* recognized card name */
- u16 subvendor; /* subvendor of the card */
- u16 subdevice; /* subdevice of the card */
- u8 func; /* function of the card to which the extra init apply */
- void (*specific_setup)(struct pm3fb_info *l_fb_info); /* card/func specific setup, done before _any_ FB access */
- struct pm3fb_card_timings *c_memt; /* defauls timings for the boards */
-} cardbase[] = {
- { "Unknown Permedia3 board", 0xFFFF, 0xFFFF, 0xFF, NULL, NULL },
- { "Appian Jeronimo 2000 head 1", 0x1097, 0x3d32, 1, NULL,
- t_AppianJeronimo2000
- },
- { "Appian Jeronimo 2000 head 2", 0x1097, 0x3d32, 2, pm3fb_j2000_setup,
- t_AppianJeronimo2000
- },
- { "Formac ProFormance 3", PCI_VENDOR_ID_3DLABS, 0x000a, 0, NULL, /* Formac use 3DLabs ID ?!? */
- t_FormacProFormance3
- },
- { "3DLabs Permedia3 Create!", PCI_VENDOR_ID_3DLABS, 0x0127, 0, NULL, NULL },
- { "3DLabs Oxygen VX1 PCI", PCI_VENDOR_ID_3DLABS, 0x0121, 0, NULL,
- t_3DLabsOxygenVX1
- },
- { "3DLabs Oxygen VX1 AGP", PCI_VENDOR_ID_3DLABS, 0x0125, 0, NULL, NULL },
- { "3DLabs Oxygen VX1-16 AGP", PCI_VENDOR_ID_3DLABS, 0x0140, 0, NULL, NULL },
- { "3DLabs Oxygen VX1-1600SW PCI", PCI_VENDOR_ID_3DLABS, 0x0800, 0, NULL, NULL },
- { "\0", 0x0, 0x0, 0, NULL, NULL }
-};
-
-/* ********************************** */
-/* ***** card-specific function ***** */
-/* ********************************** */
-static void pm3fb_j2000_setup(struct pm3fb_info *l_fb_info)
-{ /* the appian j2000 require more initialization of the second head */
- /* l_fb_info must point to the _second_ head of the J2000 */
-
- DTRACE;
-
- l_fb_info->memt = t_AppianJeronimo2000[0].memt; /* 32 MB, first and only j2000 ? */
-
- pm3fb_write_memory_timings(l_fb_info);
+ return fb_readl(par->v_regs + off);
}
-/* *************************************** */
-/* ***** permedia3-specific function ***** */
-/* *************************************** */
-static pm3fb_timing_result pm3fb_preserve_memory_timings(struct pm3fb_info *l_fb_info)
+static inline void PM3_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
{
- l_fb_info->memt.caps = PM3_READ_REG(PM3LocalMemCaps);
- l_fb_info->memt.timings = PM3_READ_REG(PM3LocalMemTimings);
- l_fb_info->memt.control = PM3_READ_REG(PM3LocalMemControl);
- l_fb_info->memt.refresh = PM3_READ_REG(PM3LocalMemRefresh);
- l_fb_info->memt.powerdown = PM3_READ_REG(PM3LocalMemPowerDown);
+ fb_writel(v, par->v_regs + off);
+}
- if ((l_fb_info->memt.caps == PM3FB_UNKNOWN_TIMING_VALUE) ||
- (l_fb_info->memt.timings == PM3FB_UNKNOWN_TIMING_VALUE) ||
- (l_fb_info->memt.control == PM3FB_UNKNOWN_TIMING_VALUE) ||
- (l_fb_info->memt.refresh == PM3FB_UNKNOWN_TIMING_VALUE) ||
- (l_fb_info->memt.powerdown == PM3FB_UNKNOWN_TIMING_VALUE))
- {
- printk(KERN_ERR "pm3fb: invalid memory timings in permedia3 board #%ld\n", l_fb_info->board_num);
- return(pm3fb_try_memory_timings(l_fb_info));
+static inline void PM3_WAIT(struct pm3_par *par, u32 n)
+{
+ while (PM3_READ_REG(par, PM3InFIFOSpace) < n);
+}
+
+static inline void PM3_SLOW_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
+{
+ if (par->v_regs) {
+ mb();
+ PM3_WAIT(par, 1);
+ wmb();
+ PM3_WRITE_REG(par, off, v);
}
- return(pm3fb_timing_ok);
}
-static pm3fb_timing_result pm3fb_try_memory_timings(struct pm3fb_info *l_fb_info)
+static inline void PM3_SET_INDEX(struct pm3_par *par, unsigned index)
{
- if (cardbase[l_fb_info->board_type].c_memt)
- {
- int i = 0, done = 0;
- while (!done)
- {
- if ((cardbase[l_fb_info->board_type].c_memt[i].memsize == l_fb_info->fb_size)
- || !(cardbase[l_fb_info->board_type].c_memt[i].memsize))
- { /* will use the 0-sized timings by default */
- done = 1;
- l_fb_info->memt = cardbase[l_fb_info->board_type].c_memt[i].memt;
- printk(KERN_WARNING "pm3fb: trying to use predefined memory timings for permedia3 board #%ld (%s, %ld MB)\n",
- l_fb_info->board_num,
- cardbase[l_fb_info->board_type].cardname,
- cardbase[l_fb_info->board_type].c_memt[i].memsize);
- pm3fb_write_memory_timings(l_fb_info);
- return(pm3fb_timing_retry);
- }
- i++;
- }
- } else
- return(pm3fb_timing_problem);
- return(pm3fb_timing_ok);
+ PM3_SLOW_WRITE_REG(par, PM3RD_IndexHigh, (index >> 8) & 0xff);
+ PM3_SLOW_WRITE_REG(par, PM3RD_IndexLow, index & 0xff);
}
-static void pm3fb_write_memory_timings(struct pm3fb_info *l_fb_info)
+static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
{
- unsigned char m, n, p;
- unsigned long clockused;
-
- PM3_SLOW_WRITE_REG(PM3LocalMemCaps, l_fb_info->memt.caps);
- PM3_SLOW_WRITE_REG(PM3LocalMemTimings, l_fb_info->memt.timings);
- PM3_SLOW_WRITE_REG(PM3LocalMemControl, l_fb_info->memt.control);
- PM3_SLOW_WRITE_REG(PM3LocalMemRefresh, l_fb_info->memt.refresh);
- PM3_SLOW_WRITE_REG(PM3LocalMemPowerDown, l_fb_info->memt.powerdown);
-
- clockused =
- pm3fb_CalculateClock(l_fb_info, 2 * 105000, PM3_REF_CLOCK, &m,
- &n, &p);
-
- PM3_WRITE_DAC_REG(PM3RD_KClkPreScale, m);
- PM3_WRITE_DAC_REG(PM3RD_KClkFeedbackScale, n);
- PM3_WRITE_DAC_REG(PM3RD_KClkPostScale, p);
- PM3_WRITE_DAC_REG(PM3RD_KClkControl,
- PM3RD_KClkControl_STATE_RUN |
- PM3RD_KClkControl_SOURCE_PLL |
- PM3RD_KClkControl_ENABLE);
- PM3_WRITE_DAC_REG(PM3RD_MClkControl,
- PM3RD_MClkControl_STATE_RUN |
- PM3RD_MClkControl_SOURCE_KCLK |
- PM3RD_MClkControl_ENABLE);
- PM3_WRITE_DAC_REG(PM3RD_SClkControl,
- PM3RD_SClkControl_STATE_RUN |
- PM3RD_SClkControl_SOURCE_PCLK |
- PM3RD_SClkControl_ENABLE);
+ PM3_SET_INDEX(par, r);
+ wmb();
+ PM3_WRITE_REG(par, PM3RD_IndexedData, v);
}
-static unsigned long pm3fb_read_dac_reg(struct pm3fb_info *l_fb_info,
- unsigned long r)
+static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno,
+ unsigned char r, unsigned char g, unsigned char b)
{
- DASSERT((l_fb_info->vIOBase != (unsigned char *) (-1)),
- "l_fb_info->vIOBase mapped in read dac reg\n");
- PM3_SET_INDEX(r);
- mb();
- return (PM3_READ_REG(PM3RD_IndexedData));
+ PM3_SLOW_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
+ PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, r);
+ PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, g);
+ PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, b);
+}
+
+static void pm3fb_clear_colormap(struct pm3_par *par,
+ unsigned char r, unsigned char g, unsigned char b)
+{
+ int i;
+
+ for (i = 0; i < 256 ; i++) /* fill color map with white */
+ pm3fb_set_color(par, i, r, g, b);
+
}
/* Calculating various clock parameter */
-static unsigned long pm3fb_CalculateClock(struct pm3fb_info *l_fb_info, unsigned long reqclock, /* In kHz units */
- unsigned long refclock, /* In kHz units */
- unsigned char *prescale, /* ClkPreScale */
- unsigned char *feedback, /* ClkFeedBackScale */
- unsigned char *postscale
- /* ClkPostScale */ )
+static void pm3fb_calculate_clock(unsigned long reqclock,
+ unsigned char *prescale,
+ unsigned char *feedback,
+ unsigned char *postscale)
{
int f, pre, post;
unsigned long freq;
long freqerr = 1000;
- unsigned long actualclock = 0;
-
- DTRACE;
+ long currerr;
for (f = 1; f < 256; f++) {
for (pre = 1; pre < 256; pre++) {
for (post = 0; post < 5; post++) {
- freq =
- ((2 * refclock * f) /
- (pre * (1 << post)));
- if ((reqclock > freq - freqerr)
- && (reqclock < freq + freqerr)) {
- freqerr =
- (reqclock >
- freq) ? reqclock -
- freq : freq - reqclock;
+ freq = ((2*PM3_REF_CLOCK * f) >> post) / pre;
+ currerr = (reqclock > freq)
+ ? reqclock - freq
+ : freq - reqclock;
+ if (currerr < freqerr) {
+ freqerr = currerr;
*feedback = f;
*prescale = pre;
*postscale = post;
- actualclock = freq;
}
}
}
}
-
- return (actualclock);
}
-static int pm3fb_Shiftbpp(struct pm3fb_info *l_fb_info,
- unsigned long depth, int v)
+static inline int pm3fb_shift_bpp(unsigned long depth, int v)
{
- DTRACE;
-
switch (depth) {
case 8:
return (v >> 4);
@@ -918,181 +187,59 @@
case 32:
return (v >> 2);
}
- DPRINTK(1, "Unsupported depth %ld\n", depth);
- return (0);
-}
-
-static int pm3fb_Unshiftbpp(struct pm3fb_info *l_fb_info,
- unsigned long depth, int v)
-{
- DTRACE;
-
- switch (depth) {
- case 8:
- return (v << 4);
- case 12:
- case 15:
- case 16:
- return (v << 3);
- case 32:
- return (v << 2);
- }
- DPRINTK(1, "Unsupported depth %ld\n", depth);
- return (0);
-}
-
-static void pm3fb_mapIO(struct pm3fb_info *l_fb_info)
-{
- DTRACE;
-
- l_fb_info->vIOBase =
- ioremap((unsigned long) l_fb_info->pIOBase, PM3_REGS_SIZE);
- l_fb_info->v_fb =
- ioremap((unsigned long) l_fb_info->p_fb, l_fb_info->fb_size);
- DPRINTK(2, "IO mapping : IOBase %lx / %lx, fb %lx / %lx\n",
- (unsigned long) l_fb_info->pIOBase,
- (unsigned long) l_fb_info->vIOBase,
- (unsigned long) l_fb_info->p_fb,
- (unsigned long) l_fb_info->v_fb);
-}
-
-static void pm3fb_unmapIO(struct pm3fb_info *l_fb_info)
-{
- DTRACE;
-
- iounmap(l_fb_info->vIOBase);
- iounmap(l_fb_info->v_fb);
- l_fb_info->vIOBase = (unsigned char *) -1;
- l_fb_info->v_fb = (unsigned char *) -1;
-}
-
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
-static void pm3fb_show_cur_mode(struct pm3fb_info *l_fb_info)
-{
- DPRINTK(2, "PM3Aperture0: 0x%08x\n", PM3_READ_REG(PM3Aperture0));
- DPRINTK(2, "PM3Aperture1: 0x%08x\n", PM3_READ_REG(PM3Aperture1));
- DPRINTK(2, "PM3ByAperture1Mode: 0x%08x\n",
- PM3_READ_REG(PM3ByAperture1Mode));
- DPRINTK(2, "PM3ByAperture2Mode: 0x%08x\n",
- PM3_READ_REG(PM3ByAperture2Mode));
- DPRINTK(2, "PM3ChipConfig: 0x%08x\n", PM3_READ_REG(PM3ChipConfig));
- DPRINTK(2, "PM3FIFODis: 0x%08x\n", PM3_READ_REG(PM3FIFODis));
- DPRINTK(2, "PM3HTotal: 0x%08x\n", PM3_READ_REG(PM3HTotal));
- DPRINTK(2, "PM3HbEnd: 0x%08x\n", PM3_READ_REG(PM3HbEnd));
- DPRINTK(2, "PM3HgEnd: 0x%08x\n", PM3_READ_REG(PM3HgEnd));
- DPRINTK(2, "PM3HsEnd: 0x%08x\n", PM3_READ_REG(PM3HsEnd));
- DPRINTK(2, "PM3HsStart: 0x%08x\n", PM3_READ_REG(PM3HsStart));
- DPRINTK(2, "PM3MemBypassWriteMask: 0x%08x\n",
- PM3_READ_REG(PM3MemBypassWriteMask));
- DPRINTK(2, "PM3RD_IndexControl: 0x%08x\n",
- PM3_READ_REG(PM3RD_IndexControl));
- DPRINTK(2, "PM3ScreenBase: 0x%08x\n", PM3_READ_REG(PM3ScreenBase));
- DPRINTK(2, "PM3ScreenStride: 0x%08x\n",
- PM3_READ_REG(PM3ScreenStride));
- DPRINTK(2, "PM3VClkCtl: 0x%08x\n", PM3_READ_REG(PM3VClkCtl));
- DPRINTK(2, "PM3VTotal: 0x%08x\n", PM3_READ_REG(PM3VTotal));
- DPRINTK(2, "PM3VbEnd: 0x%08x\n", PM3_READ_REG(PM3VbEnd));
- DPRINTK(2, "PM3VideoControl: 0x%08x\n",
- PM3_READ_REG(PM3VideoControl));
- DPRINTK(2, "PM3VsEnd: 0x%08x\n", PM3_READ_REG(PM3VsEnd));
- DPRINTK(2, "PM3VsStart: 0x%08x\n", PM3_READ_REG(PM3VsStart));
-
- DPRINTK(2, "PM3RD_ColorFormat: %ld\n",
- PM3_READ_DAC_REG(PM3RD_ColorFormat));
- DPRINTK(2, "PM3RD_DACControl: %ld\n",
- PM3_READ_DAC_REG(PM3RD_DACControl));
- DPRINTK(2, "PM3RD_DClk0FeedbackScale: %ld\n",
- PM3_READ_DAC_REG(PM3RD_DClk0FeedbackScale));
- DPRINTK(2, "PM3RD_DClk0PostScale: %ld\n",
- PM3_READ_DAC_REG(PM3RD_DClk0PostScale));
- DPRINTK(2, "PM3RD_DClk0PreScale: %ld\n",
- PM3_READ_DAC_REG(PM3RD_DClk0PreScale));
- DPRINTK(2, "[not set] PM3RD_IndexControl: %ld\n",
- PM3_READ_DAC_REG(PM3RD_IndexControl));
- DPRINTK(2, "PM3RD_MiscControl: %ld\n",
- PM3_READ_DAC_REG(PM3RD_MiscControl));
- DPRINTK(2, "PM3RD_PixelSize: %ld\n",
- PM3_READ_DAC_REG(PM3RD_PixelSize));
- DPRINTK(2, "PM3RD_SyncControl: %ld\n",
- PM3_READ_DAC_REG(PM3RD_SyncControl));
-}
-
-#endif /* defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2) */
-static void pm3fb_show_cur_timing(struct pm3fb_info *l_fb_info)
-{
- u16 subvendor, subdevice;
-
- if ((!pci_read_config_word
- (l_fb_info->dev, PCI_SUBSYSTEM_VENDOR_ID, &subvendor))
- &&
- (!pci_read_config_word
- (l_fb_info->dev, PCI_SUBSYSTEM_ID, &subdevice))) {
- /* well, nothing... */
- } else {
- subvendor = subdevice = (u16)-1;
- }
-
- printk(KERN_INFO "pm3fb: memory timings for board #%ld (subvendor: 0x%hx, subdevice: 0x%hx)\n", l_fb_info->board_num, subvendor, subdevice);
- printk(KERN_INFO " PM3LocalMemCaps: 0x%08x\n",
- PM3_READ_REG(PM3LocalMemCaps));
- printk(KERN_INFO " PM3LocalMemTimings: 0x%08x\n",
- PM3_READ_REG(PM3LocalMemTimings));
- printk(KERN_INFO " PM3LocalMemControl: 0x%08x\n",
- PM3_READ_REG(PM3LocalMemControl));
- printk(KERN_INFO " PM3LocalMemRefresh: 0x%08x\n",
- PM3_READ_REG(PM3LocalMemRefresh));
- printk(KERN_INFO " PM3LocalMemPowerDown: 0x%08x\n",
- PM3_READ_REG(PM3LocalMemPowerDown));
+ DPRINTK("Unsupported depth %ld\n", depth);
+ return 0;
}
/* write the mode to registers */
-static void pm3fb_write_mode(struct pm3fb_info *l_fb_info)
+static void pm3fb_write_mode(struct fb_info *info)
{
+ struct pm3_par *par = info->par;
char tempsync = 0x00, tempmisc = 0x00;
- DTRACE;
+ const u32 hsstart = info->var.right_margin;
+ const u32 hsend = hsstart + info->var.hsync_len;
+ const u32 hbend = hsend + info->var.left_margin;
+ const u32 xres = (info->var.xres + 31) & ~31;
+ const u32 htotal = xres + hbend;
+ const u32 vsstart = info->var.lower_margin;
+ const u32 vsend = vsstart + info->var.vsync_len;
+ const u32 vbend = vsend + info->var.upper_margin;
+ const u32 vtotal = info->var.yres + vbend;
+ const u32 width = (info->var.xres_virtual + 7) & ~7;
- PM3_SLOW_WRITE_REG(PM3MemBypassWriteMask, 0xffffffff);
- PM3_SLOW_WRITE_REG(PM3Aperture0, 0x00000000);
- PM3_SLOW_WRITE_REG(PM3Aperture1, 0x00000000);
- PM3_SLOW_WRITE_REG(PM3FIFODis, 0x00000007);
+ PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
+ PM3_SLOW_WRITE_REG(par, PM3Aperture0, 0x00000000);
+ PM3_SLOW_WRITE_REG(par, PM3Aperture1, 0x00000000);
+ PM3_SLOW_WRITE_REG(par, PM3FIFODis, 0x00000007);
- PM3_SLOW_WRITE_REG(PM3HTotal,
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- l_fb_info->current_par->htotal -
- 1));
- PM3_SLOW_WRITE_REG(PM3HsEnd,
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- l_fb_info->current_par->hsend));
- PM3_SLOW_WRITE_REG(PM3HsStart,
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- l_fb_info->current_par->
+ PM3_SLOW_WRITE_REG(par, PM3HTotal,
+ pm3fb_shift_bpp(info->var.bits_per_pixel,
+ htotal - 1));
+ PM3_SLOW_WRITE_REG(par, PM3HsEnd,
+ pm3fb_shift_bpp(info->var.bits_per_pixel,
+ hsend));
+ PM3_SLOW_WRITE_REG(par, PM3HsStart,
+ pm3fb_shift_bpp(info->var.bits_per_pixel,
hsstart));
- PM3_SLOW_WRITE_REG(PM3HbEnd,
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- l_fb_info->current_par->hbend));
- PM3_SLOW_WRITE_REG(PM3HgEnd,
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- l_fb_info->current_par->hbend));
- PM3_SLOW_WRITE_REG(PM3ScreenStride,
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- l_fb_info->current_par->stride));
- PM3_SLOW_WRITE_REG(PM3VTotal, l_fb_info->current_par->vtotal - 1);
- PM3_SLOW_WRITE_REG(PM3VsEnd, l_fb_info->current_par->vsend - 1);
- PM3_SLOW_WRITE_REG(PM3VsStart,
- l_fb_info->current_par->vsstart - 1);
- PM3_SLOW_WRITE_REG(PM3VbEnd, l_fb_info->current_par->vbend);
+ PM3_SLOW_WRITE_REG(par, PM3HbEnd,
+ pm3fb_shift_bpp(info->var.bits_per_pixel,
+ hbend));
+ PM3_SLOW_WRITE_REG(par, PM3HgEnd,
+ pm3fb_shift_bpp(info->var.bits_per_pixel,
+ hbend));
+ PM3_SLOW_WRITE_REG(par, PM3ScreenStride,
+ pm3fb_shift_bpp(info->var.bits_per_pixel,
+ width));
+ PM3_SLOW_WRITE_REG(par, PM3VTotal, vtotal - 1);
+ PM3_SLOW_WRITE_REG(par, PM3VsEnd, vsend - 1);
+ PM3_SLOW_WRITE_REG(par, PM3VsStart, vsstart - 1);
+ PM3_SLOW_WRITE_REG(par, PM3VbEnd, vbend);
- switch (l_fb_info->current_par->depth) {
+ switch (info->var.bits_per_pixel) {
case 8:
- PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_8BIT);
- PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_8BIT);
break;
@@ -1100,15 +247,15 @@
case 15:
case 16:
#ifndef __BIG_ENDIAN
- PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_16BIT);
- PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_16BIT);
#else
- PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_16BIT |
PM3ByApertureMode_BYTESWAP_BADC);
- PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_16BIT |
PM3ByApertureMode_BYTESWAP_BADC);
#endif /* ! __BIG_ENDIAN */
@@ -1116,23 +263,23 @@
case 32:
#ifndef __BIG_ENDIAN
- PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_32BIT);
- PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_32BIT);
#else
- PM3_SLOW_WRITE_REG(PM3ByAperture1Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode,
PM3ByApertureMode_PIXELSIZE_32BIT |
PM3ByApertureMode_BYTESWAP_DCBA);
- PM3_SLOW_WRITE_REG(PM3ByAperture2Mode,
+ PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode,
PM3ByApertureMode_PIXELSIZE_32BIT |
PM3ByApertureMode_BYTESWAP_DCBA);
#endif /* ! __BIG_ENDIAN */
break;
default:
- DPRINTK(1, "Unsupported depth %d\n",
- l_fb_info->current_par->depth);
+ DPRINTK("Unsupported depth %d\n",
+ info->var.bits_per_pixel);
break;
}
@@ -1143,95 +290,86 @@
* sync options in PM3RD_SyncControl. --rmk
*/
{
- unsigned int video = l_fb_info->current_par->video;
+ unsigned int video = par->video;
video &= ~(PM3VideoControl_HSYNC_MASK |
PM3VideoControl_VSYNC_MASK);
video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
PM3VideoControl_VSYNC_ACTIVE_HIGH;
- PM3_SLOW_WRITE_REG(PM3VideoControl, video);
+ PM3_SLOW_WRITE_REG(par, PM3VideoControl, video);
}
- PM3_SLOW_WRITE_REG(PM3VClkCtl,
- (PM3_READ_REG(PM3VClkCtl) & 0xFFFFFFFC));
- PM3_SLOW_WRITE_REG(PM3ScreenBase, l_fb_info->current_par->base);
- PM3_SLOW_WRITE_REG(PM3ChipConfig,
- (PM3_READ_REG(PM3ChipConfig) & 0xFFFFFFFD));
+ PM3_SLOW_WRITE_REG(par, PM3VClkCtl,
+ (PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC));
+ PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+ PM3_SLOW_WRITE_REG(par, PM3ChipConfig,
+ (PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD));
{
- unsigned char m; /* ClkPreScale */
- unsigned char n; /* ClkFeedBackScale */
- unsigned char p; /* ClkPostScale */
- (void)pm3fb_CalculateClock(l_fb_info, l_fb_info->current_par->pixclock, PM3_REF_CLOCK, &m, &n, &p);
+ unsigned char uninitialized_var(m); /* ClkPreScale */
+ unsigned char uninitialized_var(n); /* ClkFeedBackScale */
+ unsigned char uninitialized_var(p); /* ClkPostScale */
+ unsigned long pixclock = PICOS2KHZ(info->var.pixclock);
- DPRINTK(2,
- "Pixclock: %d, Pre: %d, Feedback: %d, Post: %d\n",
- l_fb_info->current_par->pixclock, (int) m, (int) n,
- (int) p);
+ (void)pm3fb_calculate_clock(pixclock, &m, &n, &p);
- PM3_WRITE_DAC_REG(PM3RD_DClk0PreScale, m);
- PM3_WRITE_DAC_REG(PM3RD_DClk0FeedbackScale, n);
- PM3_WRITE_DAC_REG(PM3RD_DClk0PostScale, p);
+ DPRINTK("Pixclock: %ld, Pre: %d, Feedback: %d, Post: %d\n",
+ pixclock, (int) m, (int) n, (int) p);
+
+ PM3_WRITE_DAC_REG(par, PM3RD_DClk0PreScale, m);
+ PM3_WRITE_DAC_REG(par, PM3RD_DClk0FeedbackScale, n);
+ PM3_WRITE_DAC_REG(par, PM3RD_DClk0PostScale, p);
}
/*
- PM3_WRITE_DAC_REG(PM3RD_IndexControl, 0x00);
+ PM3_WRITE_DAC_REG(par, PM3RD_IndexControl, 0x00);
*/
/*
- PM3_SLOW_WRITE_REG(PM3RD_IndexControl, 0x00);
+ PM3_SLOW_WRITE_REG(par, PM3RD_IndexControl, 0x00);
*/
- if ((l_fb_info->current_par->video & PM3VideoControl_HSYNC_MASK) ==
+ if ((par->video & PM3VideoControl_HSYNC_MASK) ==
PM3VideoControl_HSYNC_ACTIVE_HIGH)
tempsync |= PM3RD_SyncControl_HSYNC_ACTIVE_HIGH;
- if ((l_fb_info->current_par->video & PM3VideoControl_VSYNC_MASK) ==
+ if ((par->video & PM3VideoControl_VSYNC_MASK) ==
PM3VideoControl_VSYNC_ACTIVE_HIGH)
tempsync |= PM3RD_SyncControl_VSYNC_ACTIVE_HIGH;
-
- PM3_WRITE_DAC_REG(PM3RD_SyncControl, tempsync);
- DPRINTK(2, "PM3RD_SyncControl: %d\n", tempsync);
-
- if (flatpanel[l_fb_info->board_num])
- {
- PM3_WRITE_DAC_REG(PM3RD_DACControl, PM3RD_DACControl_BLANK_PEDESTAL_ENABLE);
- PM3_WAIT(2);
- PM3_WRITE_REG(PM3VSConfiguration, 0x06);
- PM3_WRITE_REG(0x5a00, 1 << 14); /* black magic... */
- tempmisc = PM3RD_MiscControl_VSB_OUTPUT_ENABLE;
- }
- else
- PM3_WRITE_DAC_REG(PM3RD_DACControl, 0x00);
- switch (l_fb_info->current_par->depth) {
+ PM3_WRITE_DAC_REG(par, PM3RD_SyncControl, tempsync);
+ DPRINTK("PM3RD_SyncControl: %d\n", tempsync);
+
+ PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00);
+
+ switch (info->var.bits_per_pixel) {
case 8:
- PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+ PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_8_BIT_PIXELS);
- PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+ PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_CI8_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
tempmisc |= PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
case 12:
- PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+ PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_16_BIT_PIXELS);
- PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+ PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_4444_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
- break;
+ break;
case 15:
- PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+ PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_16_BIT_PIXELS);
- PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+ PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_5551_FRONT_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
- break;
+ break;
case 16:
- PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+ PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_16_BIT_PIXELS);
- PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+ PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_565_FRONT_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
@@ -1239,1936 +377,280 @@
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
case 32:
- PM3_WRITE_DAC_REG(PM3RD_PixelSize,
+ PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
PM3RD_PixelSize_32_BIT_PIXELS);
- PM3_WRITE_DAC_REG(PM3RD_ColorFormat,
+ PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
PM3RD_ColorFormat_8888_COLOR |
PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
break;
}
- PM3_WRITE_DAC_REG(PM3RD_MiscControl, tempmisc);
-
- PM3_SHOW_CUR_MODE;
+ PM3_WRITE_DAC_REG(par, PM3RD_MiscControl, tempmisc);
}
-static void pm3fb_read_mode(struct pm3fb_info *l_fb_info,
- struct pm3fb_par *curpar)
+/*
+ * hardware independent functions
+ */
+int pm3fb_init(void);
+int pm3fb_setup(char*);
+
+static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
- unsigned long pixsize1, pixsize2, clockused;
- unsigned long pre, feedback, post;
+ u32 lpitch;
- DTRACE;
-
- clockused = PM3_READ_REG(PM3VClkCtl);
-
- switch (clockused) {
- case 3:
- pre = PM3_READ_DAC_REG(PM3RD_DClk3PreScale);
- feedback = PM3_READ_DAC_REG(PM3RD_DClk3FeedbackScale);
- post = PM3_READ_DAC_REG(PM3RD_DClk3PostScale);
-
- DPRINTK(2,
- "DClk3 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
- pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
- feedback,
- post));
- break;
- case 2:
- pre = PM3_READ_DAC_REG(PM3RD_DClk2PreScale);
- feedback = PM3_READ_DAC_REG(PM3RD_DClk2FeedbackScale);
- post = PM3_READ_DAC_REG(PM3RD_DClk2PostScale);
-
- DPRINTK(2,
- "DClk2 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
- pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
- feedback,
- post));
- break;
- case 1:
- pre = PM3_READ_DAC_REG(PM3RD_DClk1PreScale);
- feedback = PM3_READ_DAC_REG(PM3RD_DClk1FeedbackScale);
- post = PM3_READ_DAC_REG(PM3RD_DClk1PostScale);
-
- DPRINTK(2,
- "DClk1 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
- pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
- feedback,
- post));
- break;
- case 0:
- pre = PM3_READ_DAC_REG(PM3RD_DClk0PreScale);
- feedback = PM3_READ_DAC_REG(PM3RD_DClk0FeedbackScale);
- post = PM3_READ_DAC_REG(PM3RD_DClk0PostScale);
-
- DPRINTK(2,
- "DClk0 parameter: Pre: %ld, Feedback: %ld, Post: %ld ; giving pixclock: %ld\n",
- pre, feedback, post, PM3_SCALE_TO_CLOCK(pre,
- feedback,
- post));
- break;
- default:
- pre = feedback = post = 0;
- DPRINTK(1, "Unknowk D clock used : %ld\n", clockused);
- break;
- }
-
- curpar->pixclock = PM3_SCALE_TO_CLOCK(pre, feedback, post);
-
- pixsize1 =
- PM3ByApertureMode_PIXELSIZE_MASK &
- (PM3_READ_REG(PM3ByAperture1Mode));
- pixsize2 =
- PM3ByApertureMode_PIXELSIZE_MASK &
- (PM3_READ_REG(PM3ByAperture2Mode));
-
- DASSERT((pixsize1 == pixsize2),
- "pixsize the same in both aperture\n");
-
- if (pixsize1 & PM3ByApertureMode_PIXELSIZE_32BIT)
- curpar->depth = 32;
- else if (pixsize1 & PM3ByApertureMode_PIXELSIZE_16BIT)
- {
- curpar->depth = 16;
- }
- else
- curpar->depth = 8;
-
- /* not sure if I need to add one on the next ; it give better result with */
- curpar->htotal =
- pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
- 1 + PM3_READ_REG(PM3HTotal));
- curpar->hsend =
- pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
- PM3_READ_REG(PM3HsEnd));
- curpar->hsstart =
- pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
- PM3_READ_REG(PM3HsStart));
- curpar->hbend =
- pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
- PM3_READ_REG(PM3HbEnd));
-
- curpar->stride =
- pm3fb_Unshiftbpp(l_fb_info, curpar->depth,
- PM3_READ_REG(PM3ScreenStride));
-
- curpar->vtotal = 1 + PM3_READ_REG(PM3VTotal);
- curpar->vsend = 1 + PM3_READ_REG(PM3VsEnd);
- curpar->vsstart = 1 + PM3_READ_REG(PM3VsStart);
- curpar->vbend = PM3_READ_REG(PM3VbEnd);
-
- curpar->video = PM3_READ_REG(PM3VideoControl);
-
- curpar->base = PM3_READ_REG(PM3ScreenBase);
- curpar->width = curpar->htotal - curpar->hbend; /* make virtual == displayed resolution */
- curpar->height = curpar->vtotal - curpar->vbend;
-
- DPRINTK(2, "Found : %d * %d, %d Khz, stride is %08x\n",
- curpar->width, curpar->height, curpar->pixclock,
- curpar->stride);
-}
-
-static unsigned long pm3fb_size_memory(struct pm3fb_info *l_fb_info)
-{
- unsigned long memsize = 0, tempBypass, i, temp1, temp2;
- u16 subvendor, subdevice;
- pm3fb_timing_result ptr;
-
- DTRACE;
-
- l_fb_info->fb_size = 64 * 1024 * 1024; /* pm3 aperture always 64 MB */
- pm3fb_mapIO(l_fb_info); /* temporary map IO */
-
- DASSERT((l_fb_info->vIOBase != NULL),
- "IO successfully mapped before mem detect\n");
- DASSERT((l_fb_info->v_fb != NULL),
- "FB successfully mapped before mem detect\n");
-
- /* card-specific stuff, *before* accessing *any* FB memory */
- if ((!pci_read_config_word
- (l_fb_info->dev, PCI_SUBSYSTEM_VENDOR_ID, &subvendor))
- &&
- (!pci_read_config_word
- (l_fb_info->dev, PCI_SUBSYSTEM_ID, &subdevice))) {
- i = 0; l_fb_info->board_type = 0;
- while ((cardbase[i].cardname[0]) && !(l_fb_info->board_type)) {
- if ((cardbase[i].subvendor == subvendor) &&
- (cardbase[i].subdevice == subdevice) &&
- (cardbase[i].func == PCI_FUNC(l_fb_info->dev->devfn))) {
- DPRINTK(2, "Card #%ld is an %s\n",
- l_fb_info->board_num,
- cardbase[i].cardname);
- if (cardbase[i].specific_setup)
- cardbase[i].specific_setup(l_fb_info);
- l_fb_info->board_type = i;
- }
- i++;
- }
- if (!l_fb_info->board_type) {
- DPRINTK(1, "Card #%ld is an unknown 0x%04x / 0x%04x\n",
- l_fb_info->board_num, subvendor, subdevice);
- }
- } else {
- printk(KERN_ERR "pm3fb: Error: pci_read_config_word failed, board #%ld\n",
- l_fb_info->board_num);
- }
-
- if (printtimings)
- pm3fb_show_cur_timing(l_fb_info);
-
- /* card-specific setup is done, we preserve the final
- memory timing for future reference */
- if ((ptr = pm3fb_preserve_memory_timings(l_fb_info)) == pm3fb_timing_problem) { /* memory timings were wrong ! oops.... */
- return(0);
- }
-
- tempBypass = PM3_READ_REG(PM3MemBypassWriteMask);
-
- DPRINTK(2, "PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
-
- PM3_SLOW_WRITE_REG(PM3MemBypassWriteMask, 0xFFFFFFFF);
-
- /* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
- for (i = 0; i < 32; i++) {
- fb_writel(i * 0x00345678,
- (l_fb_info->v_fb + (i * 1048576)));
- mb();
- temp1 = fb_readl((l_fb_info->v_fb + (i * 1048576)));
-
- /* Let's check for wrapover, write will fail at 16MB boundary */
- if (temp1 == (i * 0x00345678))
- memsize = i;
- else
- break;
- }
-
- DPRINTK(2, "First detect pass already got %ld MB\n", memsize + 1);
-
- if (memsize == i) {
- for (i = 0; i < 32; i++) {
- /* Clear first 32MB ; 0 is 0, no need to byteswap */
- writel(0x0000000,
- (l_fb_info->v_fb + (i * 1048576)));
- mb();
- }
-
- for (i = 32; i < 64; i++) {
- fb_writel(i * 0x00345678,
- (l_fb_info->v_fb + (i * 1048576)));
- mb();
- temp1 =
- fb_readl((l_fb_info->v_fb + (i * 1048576)));
- temp2 =
- fb_readl((l_fb_info->v_fb +
- ((i - 32) * 1048576)));
- if ((temp1 == (i * 0x00345678)) && (temp2 == 0)) /* different value, different RAM... */
- memsize = i;
- else
- break;
- }
- }
-
- DPRINTK(2, "Second detect pass got %ld MB\n", memsize + 1);
-
- PM3_SLOW_WRITE_REG(PM3MemBypassWriteMask, tempBypass);
-
- pm3fb_unmapIO(l_fb_info);
- memsize = 1048576 * (memsize + 1);
-
- DPRINTK(2, "Returning 0x%08lx bytes\n", memsize);
-
- if (forcesize[l_fb_info->board_num] && ((forcesize[l_fb_info->board_num] * 1048576) != memsize))
- {
- printk(KERN_WARNING "pm3fb: mismatch between probed (%ld MB) and specified (%hd MB) memory size, using SPECIFIED !\n", memsize, forcesize[l_fb_info->board_num]);
- memsize = 1048576 * forcesize[l_fb_info->board_num];
- }
-
- l_fb_info->fb_size = memsize;
-
- if (ptr == pm3fb_timing_retry)
- {
- printk(KERN_WARNING "pm3fb: retrying memory timings check");
- if (pm3fb_try_memory_timings(l_fb_info) == pm3fb_timing_problem)
- return(0);
- }
-
- return (memsize);
-}
-
-static void pm3fb_clear_memory(struct pm3fb_info *l_fb_info, u32 cc)
-{
- int i;
-
- DTRACE;
-
- for (i = 0; i < (l_fb_info->fb_size / sizeof(u32)) ; i++) /* clear entire FB memory to black */
- {
- fb_writel(cc, (l_fb_info->v_fb + (i * sizeof(u32))));
- }
-}
-
-static void pm3fb_clear_colormap(struct pm3fb_info *l_fb_info, unsigned char r, unsigned char g, unsigned char b)
-{
- int i;
-
- DTRACE;
-
- for (i = 0; i < 256 ; i++) /* fill color map with white */
- pm3fb_set_color(l_fb_info, i, r, g, b);
-
-}
-
-/* common initialisation */
-static void pm3fb_common_init(struct pm3fb_info *l_fb_info)
-{
- DTRACE;
-
- DPRINTK(2, "Initializing board #%ld @ %lx\n", l_fb_info->board_num,
- (unsigned long) l_fb_info);
-
- strcpy(l_fb_info->gen.info.modename, permedia3_name);
- disp[l_fb_info->board_num].scrollmode = 0; /* SCROLL_YNOMOVE; *//* 0 means "let fbcon choose" */
- l_fb_info->gen.parsize = sizeof(struct pm3fb_par);
- l_fb_info->gen.info.changevar = NULL;
- l_fb_info->gen.info.fbops = &pm3fb_ops;
- l_fb_info->gen.info.disp = &(disp[l_fb_info->board_num]);
- if (fontn[l_fb_info->board_num][0])
- strcpy(l_fb_info->gen.info.fontname,
- fontn[l_fb_info->board_num]);
- l_fb_info->gen.info.switch_con = &fbgen_switch;
- l_fb_info->gen.info.updatevar = &fbgen_update_var; /* */
- l_fb_info->gen.info.flags = FBINFO_FLAG_DEFAULT;
-
- pm3fb_mapIO(l_fb_info);
-
- pm3fb_clear_memory(l_fb_info, 0);
- pm3fb_clear_colormap(l_fb_info, 0, 0, 0);
-
- (void) fbgen_get_var(&(disp[l_fb_info->board_num]).var, -1,
- &l_fb_info->gen.info);
-
- if (depth[l_fb_info->board_num]) /* override mode-defined depth */
- {
- pm3fb_encode_depth(&(disp[l_fb_info->board_num]).var, depth[l_fb_info->board_num]);
- (disp[l_fb_info->board_num]).var.bits_per_pixel = depth2bpp(depth[l_fb_info->board_num]);
- }
-
- (void) fbgen_do_set_var(&(disp[l_fb_info->board_num]).var, 1,
- &l_fb_info->gen);
-
- fbgen_set_disp(-1, &l_fb_info->gen);
-
- do_install_cmap(0, &l_fb_info->gen.info);
-
- if (register_framebuffer(&l_fb_info->gen.info) < 0) {
- DPRINTK(1, "Couldn't register framebuffer\n");
- return;
- }
-
- PM3_WRITE_DAC_REG(PM3RD_CursorMode,
- PM3RD_CursorMode_CURSOR_DISABLE);
-
- PM3_SHOW_CUR_MODE;
-
- pm3fb_write_mode(l_fb_info);
-
- printk("fb%d: %s, using %uK of video memory (%s)\n",
- l_fb_info->gen.info.node,
- permedia3_name, (u32) (l_fb_info->fb_size >> 10),
- cardbase[l_fb_info->board_type].cardname);
-}
-
-/* **************************************************** */
-/* ***** accelerated permedia3-specific functions ***** */
-/* **************************************************** */
-#ifdef PM3FB_USE_ACCEL
-static void pm3fb_wait_pm3(struct pm3fb_info *l_fb_info)
-{
- DTRACE;
-
- PM3_SLOW_WRITE_REG(PM3FilterMode, PM3FilterModeSync);
- PM3_SLOW_WRITE_REG(PM3Sync, 0);
- mb();
- do {
- while ((PM3_READ_REG(PM3OutFIFOWords)) == 0);
- rmb();
- } while ((PM3_READ_REG(PM3OutputFifo)) != PM3Sync_Tag);
-}
-
-static void pm3fb_init_engine(struct pm3fb_info *l_fb_info)
-{
- PM3_SLOW_WRITE_REG(PM3FilterMode, PM3FilterModeSync);
- PM3_SLOW_WRITE_REG(PM3StatisticMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3DeltaMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3RasterizerMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3ScissorMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3LineStippleMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3AreaStippleMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3GIDMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3DepthMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3StencilMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3StencilData, 0x0);
- PM3_SLOW_WRITE_REG(PM3ColorDDAMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureCoordMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureIndexMode0, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureIndexMode1, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureReadMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3LUTMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureFilterMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureCompositeMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureApplicationMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureCompositeColorMode1, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureCompositeAlphaMode1, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureCompositeColorMode0, 0x0);
- PM3_SLOW_WRITE_REG(PM3TextureCompositeAlphaMode0, 0x0);
- PM3_SLOW_WRITE_REG(PM3FogMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3ChromaTestMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3AlphaTestMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3AntialiasMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3YUVMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3AlphaBlendColorMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3AlphaBlendAlphaMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3DitherMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3LogicalOpMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3RouterMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3Window, 0x0);
-
- PM3_SLOW_WRITE_REG(PM3Config2D, 0x0);
-
- PM3_SLOW_WRITE_REG(PM3SpanColorMask, 0xffffffff);
-
- PM3_SLOW_WRITE_REG(PM3XBias, 0x0);
- PM3_SLOW_WRITE_REG(PM3YBias, 0x0);
- PM3_SLOW_WRITE_REG(PM3DeltaControl, 0x0);
-
- PM3_SLOW_WRITE_REG(PM3BitMaskPattern, 0xffffffff);
-
- PM3_SLOW_WRITE_REG(PM3FBDestReadEnables,
- PM3FBDestReadEnables_E(0xff) |
- PM3FBDestReadEnables_R(0xff) |
- PM3FBDestReadEnables_ReferenceAlpha(0xff));
- PM3_SLOW_WRITE_REG(PM3FBDestReadBufferAddr0, 0x0);
- PM3_SLOW_WRITE_REG(PM3FBDestReadBufferOffset0, 0x0);
- PM3_SLOW_WRITE_REG(PM3FBDestReadBufferWidth0,
- PM3FBDestReadBufferWidth_Width(l_fb_info->
- current_par->
- width));
-
- PM3_SLOW_WRITE_REG(PM3FBDestReadMode,
- PM3FBDestReadMode_ReadEnable |
- PM3FBDestReadMode_Enable0);
- PM3_SLOW_WRITE_REG(PM3FBSourceReadBufferAddr, 0x0);
- PM3_SLOW_WRITE_REG(PM3FBSourceReadBufferOffset, 0x0);
- PM3_SLOW_WRITE_REG(PM3FBSourceReadBufferWidth,
- PM3FBSourceReadBufferWidth_Width(l_fb_info->
- current_par->
- width));
- PM3_SLOW_WRITE_REG(PM3FBSourceReadMode,
- PM3FBSourceReadMode_Blocking |
- PM3FBSourceReadMode_ReadEnable);
-
- {
- unsigned long rm = 1;
- switch (l_fb_info->current_par->depth) {
- case 8:
- PM3_SLOW_WRITE_REG(PM3PixelSize,
- PM3PixelSize_GLOBAL_8BIT);
- break;
- case 12:
- case 15:
- case 16:
- PM3_SLOW_WRITE_REG(PM3PixelSize,
- PM3PixelSize_GLOBAL_16BIT);
- break;
- case 32:
- PM3_SLOW_WRITE_REG(PM3PixelSize,
- PM3PixelSize_GLOBAL_32BIT);
- break;
- default:
- DPRINTK(1, "Unsupported depth %d\n",
- l_fb_info->current_par->depth);
- break;
- }
- PM3_SLOW_WRITE_REG(PM3RasterizerMode, rm);
- }
-
- PM3_SLOW_WRITE_REG(PM3FBSoftwareWriteMask, 0xffffffff);
- PM3_SLOW_WRITE_REG(PM3FBHardwareWriteMask, 0xffffffff);
- PM3_SLOW_WRITE_REG(PM3FBWriteMode,
- PM3FBWriteMode_WriteEnable |
- PM3FBWriteMode_OpaqueSpan |
- PM3FBWriteMode_Enable0);
- PM3_SLOW_WRITE_REG(PM3FBWriteBufferAddr0, 0x0);
- PM3_SLOW_WRITE_REG(PM3FBWriteBufferOffset0, 0x0);
- PM3_SLOW_WRITE_REG(PM3FBWriteBufferWidth0,
- PM3FBWriteBufferWidth_Width(l_fb_info->
- current_par->
- width));
-
- PM3_SLOW_WRITE_REG(PM3SizeOfFramebuffer, 0x0);
- {
- unsigned long sofb = (8UL * l_fb_info->fb_size) /
- ((depth2bpp(l_fb_info->current_par->depth))
- * l_fb_info->current_par->width); /* size in lines of FB */
- if (sofb > 4095)
- PM3_SLOW_WRITE_REG(PM3SizeOfFramebuffer, 4095);
- else
- PM3_SLOW_WRITE_REG(PM3SizeOfFramebuffer, sofb);
-
- switch (l_fb_info->current_par->depth) {
- case 8:
- PM3_SLOW_WRITE_REG(PM3DitherMode,
- (1 << 10) | (2 << 3));
- break;
- case 12:
- case 15:
- case 16:
- PM3_SLOW_WRITE_REG(PM3DitherMode,
- (1 << 10) | (1 << 3));
- break;
- case 32:
- PM3_SLOW_WRITE_REG(PM3DitherMode,
- (1 << 10) | (0 << 3));
- break;
- default:
- DPRINTK(1, "Unsupported depth %d\n",
- l_fb_info->current_par->depth);
- break;
- }
- }
-
- PM3_SLOW_WRITE_REG(PM3dXDom, 0x0);
- PM3_SLOW_WRITE_REG(PM3dXSub, 0x0);
- PM3_SLOW_WRITE_REG(PM3dY, (1 << 16));
- PM3_SLOW_WRITE_REG(PM3StartXDom, 0x0);
- PM3_SLOW_WRITE_REG(PM3StartXSub, 0x0);
- PM3_SLOW_WRITE_REG(PM3StartY, 0x0);
- PM3_SLOW_WRITE_REG(PM3Count, 0x0);
-
-/* Disable LocalBuffer. better safe than sorry */
- PM3_SLOW_WRITE_REG(PM3LBDestReadMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3LBDestReadEnables, 0x0);
- PM3_SLOW_WRITE_REG(PM3LBSourceReadMode, 0x0);
- PM3_SLOW_WRITE_REG(PM3LBWriteMode, 0x0);
-
- pm3fb_wait_pm3(l_fb_info);
-}
-
-#ifdef FBCON_HAS_CFB32
-static void pm3fb_cfb32_clear(struct vc_data *conp,
- struct display *p,
- int sy, int sx, int height, int width)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- u32 c;
-
- DTRACE;
-
- sx = sx * fontwidth(p);
- width = width * fontwidth(p);
- sy = sy * fontheight(p);
- height = height * fontheight(p);
- c = ((u32 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
-
- /* block fills in 32bpp are hard, but in low res (width <= 1600 :-)
- we can use 16bpp operations, but not if NoWriteMask is on (SDRAM) */
- if ((l_fb_info->current_par->width > 1600) ||
- (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)) {
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ForegroundColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(sx)) |
- (PM3RectanglePosition_YOffset(sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(width)) |
- (PM3Render2D_Height(height)));
- } else {
- PM3_WAIT(8);
-
- PM3_WRITE_REG(PM3FBBlockColor, c);
-
- PM3_WRITE_REG(PM3PixelSize, PM3PixelSize_GLOBAL_16BIT);
-
- PM3_WRITE_REG(PM3FBWriteBufferWidth0,
- PM3FBWriteBufferWidth_Width(l_fb_info->
- current_par->
- width << 1));
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(sx << 1)) |
- (PM3RectanglePosition_YOffset(sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- (PM3Render2D_Width(width << 1)) |
- (PM3Render2D_Height(height)));
-
- PM3_WRITE_REG(PM3FBWriteBufferWidth0,
- PM3FBWriteBufferWidth_Width(l_fb_info->
- current_par->
- width));
-
- PM3_WRITE_REG(PM3PixelSize, PM3PixelSize_GLOBAL_32BIT);
- }
-
- pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfb32_clear_margins(struct vc_data *conp,
- struct display *p, int bottom_only)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- int sx, sy;
- u32 c;
-
- DTRACE;
-
- sx = conp->vc_cols * fontwidth(p); /* right margin */
- sy = conp->vc_rows * fontheight(p); /* bottom margin */
- c = ((u32 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
-
- if (!bottom_only) { /* right margin top->bottom */
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ForegroundColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset
- (p->var.xoffset +
- sx)) | (PM3RectanglePosition_YOffset(p->
- var.
- yoffset)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(p->var.xres - sx)) |
- (PM3Render2D_Height(p->var.yres)));
- }
-
- /* bottom margin left -> right */
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ForegroundColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(p->var.xoffset)) |
- (PM3RectanglePosition_YOffset(p->var.yoffset + sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(p->var.xres)) |
- (PM3Render2D_Height(p->var.yres - sy)));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-#endif /* FBCON_HAS_CFB32 */
-#ifdef FBCON_HAS_CFB16
-static void pm3fb_cfb16_clear(struct vc_data *conp,
- struct display *p,
- int sy, int sx, int height, int width)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- u32 c;
-
- DTRACE;
-
- sx = sx * fontwidth(p);
- width = width * fontwidth(p);
- sy = sy * fontheight(p);
- height = height * fontheight(p);
- c = ((u16 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
- c = c | (c << 16);
-
- PM3_WAIT(4);
-
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_WRITE_REG(PM3ForegroundColor, c);
- else
- PM3_WRITE_REG(PM3FBBlockColor, c);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(sx)) |
- (PM3RectanglePosition_YOffset(sy)));
-
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(width)) |
- (PM3Render2D_Height(height)));
- else
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- (PM3Render2D_Width(width)) |
- (PM3Render2D_Height(height)));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfb16_clear_margins(struct vc_data *conp,
- struct display *p, int bottom_only)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- int sx, sy;
- u32 c;
-
- DTRACE;
-
- sx = conp->vc_cols * fontwidth(p); /* right margin */
- sy = conp->vc_rows * fontheight(p); /* bottom margin */
- c = ((u16 *) p->dispsw_data)[attr_bgcol_ec(p, conp)];
- c = c | (c << 16);
-
- if (!bottom_only) { /* right margin top->bottom */
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_WRITE_REG(PM3ForegroundColor, c);
- else
- PM3_WRITE_REG(PM3FBBlockColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset
- (p->var.xoffset +
- sx)) | (PM3RectanglePosition_YOffset(p->
- var.
- yoffset)));
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(p->var.xres - sx)) |
- (PM3Render2D_Height(p->var.yres)));
- else
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- (PM3Render2D_Width(p->var.xres - sx)) |
- (PM3Render2D_Height(p->var.yres)));
- }
-
- /* bottom margin left -> right */
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_WRITE_REG(PM3ForegroundColor, c);
- else
- PM3_WRITE_REG(PM3FBBlockColor, c);
-
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(p->var.xoffset)) |
- (PM3RectanglePosition_YOffset(p->var.yoffset + sy)));
-
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(p->var.xres)) |
- (PM3Render2D_Height(p->var.yres - sy)));
- else
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- (PM3Render2D_Width(p->var.xres)) |
- (PM3Render2D_Height(p->var.yres - sy)));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-#endif /* FBCON_HAS_CFB16 */
-#ifdef FBCON_HAS_CFB8
-static void pm3fb_cfb8_clear(struct vc_data *conp,
- struct display *p,
- int sy, int sx, int height, int width)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- u32 c;
-
- DTRACE;
-
- sx = sx * fontwidth(p);
- width = width * fontwidth(p);
- sy = sy * fontheight(p);
- height = height * fontheight(p);
-
- c = attr_bgcol_ec(p, conp);
- c |= c << 8;
- c |= c << 16;
-
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ForegroundColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(sx)) |
- (PM3RectanglePosition_YOffset(sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(width)) |
- (PM3Render2D_Height(height)));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfb8_clear_margins(struct vc_data *conp,
- struct display *p, int bottom_only)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- int sx, sy;
- u32 c;
-
- DTRACE;
-
- sx = conp->vc_cols * fontwidth(p); /* right margin */
- sy = conp->vc_rows * fontheight(p); /* bottom margin */
- c = attr_bgcol_ec(p, conp);
- c |= c << 8;
- c |= c << 16;
-
- if (!bottom_only) { /* right margin top->bottom */
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ForegroundColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset
- (p->var.xoffset +
- sx)) | (PM3RectanglePosition_YOffset(p->
- var.
- yoffset)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(p->var.xres - sx)) |
- (PM3Render2D_Height(p->var.yres)));
- }
-
- /* bottom margin left -> right */
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ForegroundColor, c);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(p->var.xoffset)) |
- (PM3RectanglePosition_YOffset(p->var.yoffset + sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(p->var.xres)) |
- (PM3Render2D_Height(p->var.yres - sy)));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-#endif /* FBCON_HAS_CFB8 */
-#if defined(FBCON_HAS_CFB8) || defined(FBCON_HAS_CFB16) || defined(FBCON_HAS_CFB32)
-static void pm3fb_cfbX_bmove(struct display *p,
- int sy, int sx,
- int dy, int dx, int height, int width)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- int x_align, o_x, o_y;
-
- DTRACE;
-
- sx = sx * fontwidth(p);
- dx = dx * fontwidth(p);
- width = width * fontwidth(p);
- sy = sy * fontheight(p);
- dy = dy * fontheight(p);
- height = height * fontheight(p);
-
- o_x = sx - dx; /*(sx > dx ) ? (sx - dx) : (dx - sx); */
- o_y = sy - dy; /*(sy > dy ) ? (sy - dy) : (dy - sy); */
-
- x_align = (sx & 0x1f);
-
- PM3_WAIT(6);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UserScissorEnable |
- PM3Config2D_ForegroundROPEnable |
- PM3Config2D_Blocking |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3ScissorMinXY,
- ((dy & 0x0fff) << 16) | (dx & 0x0fff));
- PM3_WRITE_REG(PM3ScissorMaxXY,
- (((dy + height) & 0x0fff) << 16) |
- ((dx + width) & 0x0fff));
-
- PM3_WRITE_REG(PM3FBSourceReadBufferOffset,
- PM3FBSourceReadBufferOffset_XOffset(o_x) |
- PM3FBSourceReadBufferOffset_YOffset(o_y));
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(dx - x_align)) |
- (PM3RectanglePosition_YOffset(dy)));
-
- PM3_WRITE_REG(PM3Render2D,
- ((sx > dx) ? PM3Render2D_XPositive : 0) |
- ((sy > dy) ? PM3Render2D_YPositive : 0) |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- PM3Render2D_FBSourceReadEnable |
- (PM3Render2D_Width(width + x_align)) |
- (PM3Render2D_Height(height)));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfbX_putc(struct vc_data *conp, struct display *p,
- int c, int yy, int xx)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- u8 *cdat, asx = 0, asy = 0, o_x = 0, o_y = 0;
- u32 fgx, bgx, ldat;
- int sx, sy, i;
-
- DTRACE;
-
- if (l_fb_info->current_par->depth == 8)
- fgx = attr_fgcol(p, c);
- else if (depth2bpp(l_fb_info->current_par->depth) == 16)
- fgx = ((u16 *) p->dispsw_data)[attr_fgcol(p, c)];
- else
- fgx = ((u32 *) p->dispsw_data)[attr_fgcol(p, c)];
-
- PM3_COLOR(fgx);
-
- if (l_fb_info->current_par->depth == 8)
- bgx = attr_bgcol(p, c);
- else if (depth2bpp(l_fb_info->current_par->depth) == 16)
- bgx = ((u16 *) p->dispsw_data)[attr_bgcol(p, c)];
- else
- bgx = ((u32 *) p->dispsw_data)[attr_bgcol(p, c)];
-
- PM3_COLOR(bgx);
-
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable | PM3Config2D_OpaqueSpan);
-
- PM3_WRITE_REG(PM3ForegroundColor, fgx);
- PM3_WRITE_REG(PM3FillBackgroundColor, bgx);
-
- /* WARNING : address select X need to specify 8 bits for fontwidth <= 8 */
- /* and 16 bits for fontwidth <= 16 */
- /* same in _putcs, same for Y and fontheight */
- if (fontwidth(p) <= 8)
- asx = 2;
- else if (fontwidth(p) <= 16)
- asx = 3; /* look OK */
- if (fontheight(p) <= 8)
- asy = 2;
- else if (fontheight(p) <= 16)
- asy = 3; /* look OK */
- else if (fontheight(p) <= 32)
- asy = 4; /* look OK */
-
- sx = xx * fontwidth(p);
- sy = yy * fontheight(p);
-
- if (fontwidth(p) <= 8)
- o_x = (8 - (sx & 0x7)) & 0x7;
- else if (fontwidth(p) <= 16)
- o_x = (16 - (sx & 0xF)) & 0xF;
- if (fontheight(p) <= 8)
- o_y = (8 - (sy & 0x7)) & 0x7;
- else if (fontheight(p) <= 16)
- o_y = (16 - (sy & 0xF)) & 0xF;
- else if (fontheight(p) <= 32)
- o_y = (32 - (sy & 0x1F)) & 0x1F;
-
- PM3_WRITE_REG(PM3AreaStippleMode, (o_x << 7) | (o_y << 12) | /* x_offset, y_offset in pattern */
- (1 << 18) | /* BE */
- 1 | (asx << 1) | (asy << 4) | /* address select x/y */
- (1 << 20)); /* OpaqueSpan */
-
- if (fontwidth(p) <= 8) {
- cdat = p->fontdata + (c & p->charmask) * fontheight(p);
- } else {
- cdat =
- p->fontdata +
- ((c & p->charmask) * (fontheight(p) << 1));
- }
-
- PM3_WAIT(2 + fontheight(p));
-
- for (i = 0; i < fontheight(p); i++) { /* assume fontheight <= 32 */
- if (fontwidth(p) <= 8) {
- ldat = *cdat++;
- } else { /* assume fontwidth <= 16 ATM */
-
- ldat = ((*cdat++) << 8);
- ldat |= *cdat++;
- }
- PM3_WRITE_REG(AreaStipplePattern_indexed(i), ldat);
- }
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(sx)) |
- (PM3RectanglePosition_YOffset(sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_AreaStippleEnable |
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(fontwidth(p))) |
- (PM3Render2D_Height(fontheight(p))));
-
- pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfbX_putcs(struct vc_data *conp, struct display *p,
- const unsigned short *s, int count, int yy,
- int xx)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
- u8 *cdat, asx = 0, asy = 0, o_x = 0, o_y = 0;
- u32 fgx, bgx, ldat;
- int sx, sy, i, j;
- u16 sc;
-
- DTRACE;
-
- sc = scr_readw(s);
- if (l_fb_info->current_par->depth == 8)
- fgx = attr_fgcol(p, sc);
- else if (depth2bpp(l_fb_info->current_par->depth) == 16)
- fgx = ((u16 *) p->dispsw_data)[attr_fgcol(p, sc)];
- else
- fgx = ((u32 *) p->dispsw_data)[attr_fgcol(p, sc)];
-
- PM3_COLOR(fgx);
-
- if (l_fb_info->current_par->depth == 8)
- bgx = attr_bgcol(p, sc);
- else if (depth2bpp(l_fb_info->current_par->depth) == 16)
- bgx = ((u16 *) p->dispsw_data)[attr_bgcol(p, sc)];
- else
- bgx = ((u32 *) p->dispsw_data)[attr_bgcol(p, sc)];
-
- PM3_COLOR(bgx);
-
- PM3_WAIT(4);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0x3)) | /* Ox3 is GXcopy */
- PM3Config2D_FBWriteEnable |
- PM3Config2D_OpaqueSpan);
-
- PM3_WRITE_REG(PM3ForegroundColor, fgx);
- PM3_WRITE_REG(PM3FillBackgroundColor, bgx);
-
- /* WARNING : address select X need to specify 8 bits for fontwidth <= 8 */
- /* and 16 bits for fontwidth <= 16 */
- /* same in _putc, same for Y and fontheight */
- if (fontwidth(p) <= 8)
- asx = 2;
- else if (fontwidth(p) <= 16)
- asx = 3; /* look OK */
- if (fontheight(p) <= 8)
- asy = 2;
- else if (fontheight(p) <= 16)
- asy = 3; /* look OK */
- else if (fontheight(p) <= 32)
- asy = 4; /* look OK */
-
- sy = yy * fontheight(p);
-
- if (fontheight(p) <= 8)
- o_y = (8 - (sy & 0x7)) & 0x7;
- else if (fontheight(p) <= 16)
- o_y = (16 - (sy & 0xF)) & 0xF;
- else if (fontheight(p) <= 32)
- o_y = (32 - (sy & 0x1F)) & 0x1F;
-
- for (j = 0; j < count; j++) {
- sc = scr_readw(s + j);
- if (fontwidth(p) <= 8)
- cdat = p->fontdata +
- (sc & p->charmask) * fontheight(p);
- else
- cdat = p->fontdata +
- ((sc & p->charmask) * fontheight(p) << 1);
-
- sx = (xx + j) * fontwidth(p);
-
- if (fontwidth(p) <= 8)
- o_x = (8 - (sx & 0x7)) & 0x7;
- else if (fontwidth(p) <= 16)
- o_x = (16 - (sx & 0xF)) & 0xF;
-
- PM3_WAIT(3 + fontheight(p));
-
- PM3_WRITE_REG(PM3AreaStippleMode, (o_x << 7) | (o_y << 12) | /* x_offset, y_offset in pattern */
- (1 << 18) | /* BE */
- 1 | (asx << 1) | (asy << 4) | /* address select x/y */
- (1 << 20)); /* OpaqueSpan */
-
- for (i = 0; i < fontheight(p); i++) { /* assume fontheight <= 32 */
- if (fontwidth(p) <= 8) {
- ldat = *cdat++;
- } else { /* assume fontwidth <= 16 ATM */
- ldat = ((*cdat++) << 8);
- ldat |= *cdat++;
- }
- PM3_WRITE_REG(AreaStipplePattern_indexed(i), ldat);
- }
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(sx)) |
- (PM3RectanglePosition_YOffset(sy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_AreaStippleEnable |
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(fontwidth(p))) |
- (PM3Render2D_Height(fontheight(p))));
- }
- pm3fb_wait_pm3(l_fb_info);
-}
-
-static void pm3fb_cfbX_revc(struct display *p, int xx, int yy)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) p->fb_info;
-
- xx = xx * fontwidth(p);
- yy = yy * fontheight(p);
-
- if (l_fb_info->current_par->depth == 8)
- {
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_SLOW_WRITE_REG(PM3FBSoftwareWriteMask, 0x0F0F0F0F);
- else
- PM3_SLOW_WRITE_REG(PM3FBHardwareWriteMask, 0x0F0F0F0F);
- }
-
- PM3_WAIT(3);
-
- PM3_WRITE_REG(PM3Config2D,
- PM3Config2D_UseConstantSource |
- PM3Config2D_ForegroundROPEnable |
- (PM3Config2D_ForegroundROP(0xa)) | /* Oxa is GXinvert */
- PM3Config2D_FBDestReadEnable |
- PM3Config2D_FBWriteEnable);
-
- PM3_WRITE_REG(PM3RectanglePosition,
- (PM3RectanglePosition_XOffset(xx)) |
- (PM3RectanglePosition_YOffset(yy)));
-
- PM3_WRITE_REG(PM3Render2D,
- PM3Render2D_XPositive |
- PM3Render2D_YPositive |
- PM3Render2D_Operation_Normal |
- PM3Render2D_SpanOperation |
- (PM3Render2D_Width(fontwidth(p))) |
- (PM3Render2D_Height(fontheight(p))));
-
- pm3fb_wait_pm3(l_fb_info);
-
- if (l_fb_info->current_par->depth == 8)
- {
- if (l_fb_info->memt.caps & PM3LocalMemCaps_NoWriteMask)
- PM3_SLOW_WRITE_REG(PM3FBSoftwareWriteMask, 0xFFFFFFFF);
- else
- PM3_SLOW_WRITE_REG(PM3FBHardwareWriteMask, 0xFFFFFFFF);
- }
-}
-
-#endif /* FBCON_HAS_CFB8 || FBCON_HAS_CFB16 || FBCON_HAS_CFB32 */
-#endif /* PM3FB_USE_ACCEL */
-/* *********************************** */
-/* ***** pre-init board(s) setup ***** */
-/* *********************************** */
-
-static void pm3fb_mode_setup(char *mode, unsigned long board_num)
-{
- struct pm3fb_info *l_fb_info = &(fb_info[board_num]);
- struct pm3fb_par *l_fb_par = &(current_par[board_num]);
- unsigned long i = 0;
-
- current_par_valid[board_num] = 0;
-
- if (!strncmp(mode, "current", 7)) {
- l_fb_info->use_current = 1; /* default w/ OpenFirmware */
- } else {
- while ((mode_base[i].name[0])
- && (!current_par_valid[board_num])) {
- if (!
- (strncmp
- (mode, mode_base[i].name,
- strlen(mode_base[i].name)))) {
- memcpy(l_fb_par, &(mode_base[i].user_mode),
- sizeof(struct pm3fb_par));
- current_par_valid[board_num] = 1;
- DPRINTK(2, "Mode set to %s\n",
- mode_base[i].name);
- }
- i++;
- }
- DASSERT(current_par_valid[board_num],
- "Valid mode on command line\n");
- }
-}
-
-static void pm3fb_pciid_setup(char *pciid, unsigned long board_num)
-{
- short l_bus = -1, l_slot = -1, l_func = -1;
- char *next;
-
- if (pciid) {
- l_bus = simple_strtoul(pciid, &next, 10);
- if (next && (next[0] == ':')) {
- pciid = next + 1;
- l_slot = simple_strtoul(pciid, &next, 10);
- if (next && (next[0] == ':')) {
- pciid = next + 1;
- l_func =
- simple_strtoul(pciid, (char **) NULL,
- 10);
- }
- }
- } else
- return;
-
- if ((l_bus >= 0) && (l_slot >= 0) && (l_func >= 0)) {
- bus[board_num] = l_bus;
- slot[board_num] = l_slot;
- func[board_num] = l_func;
- DPRINTK(2, "Board #%ld will be PciId: %hd:%hd:%hd\n",
- board_num, l_bus, l_slot, l_func);
- } else {
- DPRINTK(1, "Invalid PciId: %hd:%hd:%hd for board #%ld\n",
- l_bus, l_slot, l_func, board_num);
- }
-}
-
-static void pm3fb_font_setup(char *lf, unsigned long board_num)
-{
- unsigned long lfs = strlen(lf);
-
- if (lfs > (PM3_FONTNAME_SIZE - 1)) {
- DPRINTK(1, "Fontname %s too long\n", lf);
- return;
- }
- strlcpy(fontn[board_num], lf, lfs + 1);
-}
-
-static void pm3fb_bootdepth_setup(char *bds, unsigned long board_num)
-{
- unsigned long bd = simple_strtoul(bds, (char **) NULL, 10);
-
- if (!(depth_supported(bd))) {
- printk(KERN_WARNING "pm3fb: ignoring invalid depth %s for board #%ld\n",
- bds, board_num);
- return;
- }
- depth[board_num] = bd;
-}
-
-static void pm3fb_forcesize_setup(char *bds, unsigned long board_num)
-{
- unsigned long bd = simple_strtoul(bds, (char **) NULL, 10);
-
- if (bd > 64) {
- printk(KERN_WARNING "pm3fb: ignoring invalid memory size %s for board #%ld\n",
- bds, board_num);
- return;
- }
- forcesize[board_num] = bd;
-}
-
-static char *pm3fb_boardnum_setup(char *options, unsigned long *bn)
-{
- char *next;
-
- if (!(isdigit(options[0]))) {
- (*bn) = 0;
- return (options);
- }
-
- (*bn) = simple_strtoul(options, &next, 10);
-
- if (next && (next[0] == ':') && ((*bn) >= 0)
- && ((*bn) <= PM3_MAX_BOARD)) {
- DPRINTK(2, "Board_num seen as %ld\n", (*bn));
- return (next + 1);
- } else {
- (*bn) = 0;
- DPRINTK(2, "Board_num default to %ld\n", (*bn));
- return (options);
- }
-}
-
-static void pm3fb_real_setup(char *options)
-{
- char *next;
- unsigned long i, bn;
- struct pm3fb_info *l_fb_info;
-
- DTRACE;
-
- DPRINTK(2, "Options : %s\n", options);
-
- for (i = 0; i < PM3_MAX_BOARD; i++) {
- l_fb_info = &(fb_info[i]);
- memset(l_fb_info, 0, sizeof(struct pm3fb_info));
- l_fb_info->gen.fbhw = &pm3fb_switch;
- l_fb_info->board_num = i;
- current_par_valid[i] = 0;
- slot[i] = -1;
- func[i] = -1;
- bus[i] = -1;
- disable[i] = 0;
- noaccel[i] = 0;
- fontn[i][0] = '\0';
- depth[i] = 0;
- l_fb_info->current_par = &(current_par[i]);
- }
-
- /* eat up prefix pm3fb and whatever is used as separator i.e. :,= */
- if (!strncmp(options, "pm3fb", 5)) {
- options += 5;
- while (((*options) == ',') || ((*options) == ':')
- || ((*options) == '='))
- options++;
- }
-
- while (options) {
- bn = 0;
- if ((next = strchr(options, ','))) {
- (*next) = '\0';
- next++;
- }
-
- if (!strncmp(options, "mode:", 5)) {
- options = pm3fb_boardnum_setup(options + 5, &bn);
- DPRINTK(2, "Setting mode for board #%ld\n", bn);
- pm3fb_mode_setup(options, bn);
- } else if (!strncmp(options, "off:", 4)) {
- options = pm3fb_boardnum_setup(options + 4, &bn);
- DPRINTK(2, "Disabling board #%ld\n", bn);
- disable[bn] = 1;
- } else if (!strncmp(options, "off", 3)) { /* disable everything */
- for (i = 0; i < PM3_MAX_BOARD; i++)
- disable[i] = 1;
- } else if (!strncmp(options, "disable:", 8)) {
- options = pm3fb_boardnum_setup(options + 8, &bn);
- DPRINTK(2, "Disabling board #%ld\n", bn);
- disable[bn] = 1;
- } else if (!strncmp(options, "pciid:", 6)) {
- options = pm3fb_boardnum_setup(options + 6, &bn);
- DPRINTK(2, "Setting PciID for board #%ld\n", bn);
- pm3fb_pciid_setup(options, bn);
- } else if (!strncmp(options, "noaccel:", 8)) {
- options = pm3fb_boardnum_setup(options + 8, &bn);
- noaccel[bn] = 1;
- } else if (!strncmp(options, "font:", 5)) {
- options = pm3fb_boardnum_setup(options + 5, &bn);
- pm3fb_font_setup(options, bn);
- } else if (!strncmp(options, "depth:", 6)) {
- options = pm3fb_boardnum_setup(options + 6, &bn);
- pm3fb_bootdepth_setup(options, bn);
- } else if (!strncmp(options, "printtimings", 12)) {
- printtimings = 1;
- } else if (!strncmp(options, "flatpanel:", 10)) {
- options = pm3fb_boardnum_setup(options + 10, &bn);
- flatpanel[bn] = 1;
- } else if (!strncmp(options, "forcesize:", 10)) {
- options = pm3fb_boardnum_setup(options + 10, &bn);
- pm3fb_forcesize_setup(options, bn);
- }
- options = next;
- }
-}
-
-/* ********************************************** */
-/* ***** framebuffer API standard functions ***** */
-/* ********************************************** */
-
-static int pm3fb_encode_fix(struct fb_fix_screeninfo *fix,
- const void *par, struct fb_info_gen *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
- struct pm3fb_par *p = (struct pm3fb_par *) par;
-
- DTRACE;
-
- strcpy(fix->id, permedia3_name);
- fix->smem_start = (unsigned long)l_fb_info->p_fb;
- fix->smem_len = l_fb_info->fb_size;
- fix->mmio_start = (unsigned long)l_fb_info->pIOBase;
- fix->mmio_len = PM3_REGS_SIZE;
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- fix->accel = FB_ACCEL_3DLABS_PERMEDIA3;
- else
-#endif /* PM3FB_USE_ACCEL */
- fix->accel = FB_ACCEL_NONE;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->visual =
- (p->depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
- if (current_par_valid[l_fb_info->board_num])
- fix->line_length =
- l_fb_info->current_par->width *
- depth2ByPP(l_fb_info->current_par->depth);
- else
- fix->line_length = 0;
- fix->xpanstep = 64 / depth2bpp(p->depth);
- fix->ypanstep = 1;
- fix->ywrapstep = 0;
- return (0);
-}
-
-static int pm3fb_decode_var(const struct fb_var_screeninfo *var,
- void *par, struct fb_info_gen *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
- struct pm3fb_par *p = (struct pm3fb_par *) par;
- struct pm3fb_par temp_p;
- u32 xres;
-
- DTRACE;
-
- DASSERT((var != NULL), "fb_var_screeninfo* not NULL");
- DASSERT((p != NULL), "pm3fb_par* not NULL");
- DASSERT((l_fb_info != NULL), "pm3fb_info* not NULL");
-
- memset(&temp_p, 0, sizeof(struct pm3fb_par));
- temp_p.width = (var->xres_virtual + 7) & ~7;
- temp_p.height = var->yres_virtual;
-
- if (!(depth_supported(var->bits_per_pixel))) /* round unsupported up to a multiple of 8 */
- temp_p.depth = depth2bpp(var->bits_per_pixel);
- else
- temp_p.depth = var->bits_per_pixel;
-
- temp_p.depth = (temp_p.depth > 32) ? 32 : temp_p.depth; /* max 32 */
- temp_p.depth = (temp_p.depth == 24) ? 32 : temp_p.depth; /* 24 unsupported, round-up to 32 */
-
- if ((temp_p.depth == 16) && (var->red.length == 5) && (var->green.length == 5) && (var->blue.length == 5))
- temp_p.depth = 15; /* RGBA 5551 is stored as depth 15 */
-
- if ((temp_p.depth == 16) && (var->red.length == 4) && (var->green.length == 4) && (var->blue.length == 4))
- temp_p.depth = 12; /* RGBA 4444 is stored as depth 12 */
-
-
- DPRINTK(2,
- "xres: %d, yres: %d, vxres: %d, vyres: %d ; xoffset:%d, yoffset: %d\n",
- var->xres, var->yres, var->xres_virtual, var->yres_virtual,
- var->xoffset, var->yoffset);
-
- xres = (var->xres + 31) & ~31;
- if (temp_p.width < xres + var->xoffset)
- temp_p.width = xres + var->xoffset;
- if (temp_p.height < var->yres + var->yoffset)
- temp_p.height = var->yres + var->yoffset;
-
- if (temp_p.width > 2048) {
- DPRINTK(1, "virtual width not supported: %u\n",
- temp_p.width);
- return (-EINVAL);
- }
- if (var->yres < 200) {
- DPRINTK(1, "height not supported: %u\n", (u32) var->yres);
- return (-EINVAL);
- }
- if (temp_p.height < 200 || temp_p.height > 4095) {
- DPRINTK(1, "virtual height not supported: %u\n",
- temp_p.height);
- return (-EINVAL);
- }
- if (!(depth_supported(temp_p.depth))) {
- DPRINTK(1, "depth not supported: %u\n", temp_p.depth);
- return (-EINVAL);
- }
- if ((temp_p.width * temp_p.height * depth2ByPP(temp_p.depth)) >
- l_fb_info->fb_size) {
- DPRINTK(1, "no memory for screen (%ux%ux%u)\n",
- temp_p.width, temp_p.height, temp_p.depth);
- return (-EINVAL);
- }
-
- if ((!var->pixclock) ||
- (!var->right_margin) ||
- (!var->hsync_len) ||
- (!var->left_margin) ||
- (!var->lower_margin) ||
- (!var->vsync_len) || (!var->upper_margin)
- ) {
- unsigned long i = 0, done = 0;
- printk(KERN_WARNING "pm3fb: refusing to use a likely wrong timing\n");
-
- while ((mode_base[i].user_mode.width) && !done) {
- if ((mode_base[i].user_mode.width == temp_p.width)
- && (mode_base[i].user_mode.height ==
- temp_p.height)) {
- printk(KERN_NOTICE "pm3fb: using close match %s\n",
- mode_base[i].name);
- temp_p = mode_base[i].user_mode;
- done = 1;
- }
- i++;
- }
- if (!done)
- return (-EINVAL);
- } else {
- temp_p.pixclock = PICOS2KHZ(var->pixclock);
- if (temp_p.pixclock > PM3_MAX_PIXCLOCK) {
- DPRINTK(1, "pixclock too high (%uKHz)\n",
- temp_p.pixclock);
- return (-EINVAL);
- }
-
- temp_p.hsstart = var->right_margin;
- temp_p.hsend = var->right_margin + var->hsync_len;
- temp_p.hbend =
- var->right_margin + var->hsync_len + var->left_margin;
- temp_p.htotal = xres + temp_p.hbend;
-
- temp_p.vsstart = var->lower_margin;
- temp_p.vsend = var->lower_margin + var->vsync_len;
- temp_p.vbend =
- var->lower_margin + var->vsync_len + var->upper_margin;
- temp_p.vtotal = var->yres + temp_p.vbend;
-
- temp_p.stride = temp_p.width;
-
- DPRINTK(2, "Using %d * %d, %d Khz, stride is %08x\n",
- temp_p.width, temp_p.height, temp_p.pixclock,
- temp_p.stride);
-
- temp_p.base =
- pm3fb_Shiftbpp(l_fb_info, temp_p.depth,
- (var->yoffset * xres) + var->xoffset);
-
- temp_p.video = 0;
-
- if (var->sync & FB_SYNC_HOR_HIGH_ACT)
- temp_p.video |= PM3VideoControl_HSYNC_ACTIVE_HIGH;
- else
- temp_p.video |= PM3VideoControl_HSYNC_ACTIVE_LOW;
-
- if (var->sync & FB_SYNC_VERT_HIGH_ACT)
- temp_p.video |= PM3VideoControl_VSYNC_ACTIVE_HIGH;
- else
- temp_p.video |= PM3VideoControl_VSYNC_ACTIVE_LOW;
-
- if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
- DPRINTK(1, "Interlaced mode not supported\n\n");
- return (-EINVAL);
- }
-
- if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
- temp_p.video |= PM3VideoControl_LINE_DOUBLE_ON;
- else
- temp_p.video |= PM3VideoControl_LINE_DOUBLE_OFF;
-
- if (var->activate == FB_ACTIVATE_NOW)
- temp_p.video |= PM3VideoControl_ENABLE;
- else {
- temp_p.video |= PM3VideoControl_DISABLE;
- DPRINTK(2, "PM3Video disabled\n");
- }
-
- switch (temp_p.depth) {
- case 8:
- temp_p.video |= PM3VideoControl_PIXELSIZE_8BIT;
- break;
- case 12:
- case 15:
- case 16:
- temp_p.video |= PM3VideoControl_PIXELSIZE_16BIT;
- break;
- case 32:
- temp_p.video |= PM3VideoControl_PIXELSIZE_32BIT;
- break;
- default:
- DPRINTK(1, "Unsupported depth\n");
- break;
- }
- }
- (*p) = temp_p;
-
-#ifdef PM3FB_USE_ACCEL
- if (var->accel_flags & FB_ACCELF_TEXT)
- noaccel[l_fb_info->board_num] = 0;
- else
- noaccel[l_fb_info->board_num] = 1;
-#endif /* PM3FB_USE_ACCEL */
-
- return (0);
-}
-
-static void pm3fb_encode_depth(struct fb_var_screeninfo *var, long d)
-{
- switch (d) {
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ switch(var->bits_per_pixel) {
case 8:
var->red.length = var->green.length = var->blue.length = 8;
var->red.offset = var->green.offset = var->blue.offset = 0;
- var->transp.offset = var->transp.length = 0;
break;
-
case 12:
- var->red.offset = 8;
- var->red.length = 4;
+ var->red.offset = 8;
+ var->red.length = 4;
var->green.offset = 4;
var->green.length = 4;
- var->blue.offset = 0;
- var->blue.length = 4;
+ var->blue.offset = 0;
+ var->blue.length = 4;
var->transp.offset = 12;
var->transp.length = 4;
- break;
-
case 15:
- var->red.offset = 10;
- var->red.length = 5;
+ var->red.offset = 10;
+ var->red.length = 5;
var->green.offset = 5;
var->green.length = 5;
- var->blue.offset = 0;
- var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
var->transp.offset = 15;
var->transp.length = 1;
break;
-
case 16:
- var->red.offset = 11;
- var->red.length = 5;
+ var->red.offset = 11;
+ var->red.length = 5;
var->green.offset = 5;
var->green.length = 6;
- var->blue.offset = 0;
- var->blue.length = 5;
- var->transp.offset = var->transp.length = 0;
+ var->blue.offset = 0;
+ var->blue.length = 5;
break;
-
case 32:
var->transp.offset = 24;
- var->red.offset = 16;
+ var->transp.length = 8;
+ var->red.offset = 16;
var->green.offset = 8;
- var->blue.offset = 0;
- var->red.length = var->green.length =
- var->blue.length = var->transp.length = 8;
+ var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length = 8;
break;
-
default:
- DPRINTK(1, "Unsupported depth %ld\n", d);
- break;
+ DPRINTK("depth not supported: %u\n", var->bits_per_pixel);
+ return -EINVAL;
}
-}
-
-static int pm3fb_encode_var(struct fb_var_screeninfo *var,
- const void *par, struct fb_info_gen *info)
-{
- struct pm3fb_par *p = (struct pm3fb_par *) par;
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
- u32 base;
-
- DTRACE;
-
- DASSERT((var != NULL), "fb_var_screeninfo* not NULL");
- DASSERT((p != NULL), "pm3fb_par* not NULL");
- DASSERT((info != NULL), "fb_info_gen* not NULL");
-
- memset(var, 0, sizeof(struct fb_var_screeninfo));
-
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- var->accel_flags |= FB_ACCELF_TEXT;
-#endif /* PM3FB_USE_ACCEL */
-
- var->xres_virtual = p->width;
- var->yres_virtual = p->height;
- var->xres = p->htotal - p->hbend;
- var->yres = p->vtotal - p->vbend;
-
- DPRINTK(2, "xres = %d, yres : %d\n", var->xres, var->yres);
-
- var->right_margin = p->hsstart;
- var->hsync_len = p->hsend - p->hsstart;
- var->left_margin = p->hbend - p->hsend;
- var->lower_margin = p->vsstart;
- var->vsync_len = p->vsend - p->vsstart;
- var->upper_margin = p->vbend - p->vsend;
- var->bits_per_pixel = depth2bpp(p->depth);
-
- pm3fb_encode_depth(var, p->depth);
-
- base = pm3fb_Unshiftbpp(l_fb_info, p->depth, p->base);
-
- var->xoffset = base % var->xres;
- var->yoffset = base / var->xres;
-
var->height = var->width = -1;
- var->pixclock = KHZ2PICOS(p->pixclock);
-
- if ((p->video & PM3VideoControl_HSYNC_MASK) ==
- PM3VideoControl_HSYNC_ACTIVE_HIGH)
- var->sync |= FB_SYNC_HOR_HIGH_ACT;
- if ((p->video & PM3VideoControl_VSYNC_MASK) ==
- PM3VideoControl_VSYNC_ACTIVE_HIGH)
- var->sync |= FB_SYNC_VERT_HIGH_ACT;
- if (p->video & PM3VideoControl_LINE_DOUBLE_ON)
- var->vmode = FB_VMODE_DOUBLE;
-
- return (0);
-}
-
-static void pm3fb_get_par(void *par, struct fb_info_gen *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
- DTRACE;
-
- if (!current_par_valid[l_fb_info->board_num]) {
- if (l_fb_info->use_current)
- pm3fb_read_mode(l_fb_info, l_fb_info->current_par);
- else
- memcpy(l_fb_info->current_par,
- &(mode_base[0].user_mode),
- sizeof(struct pm3fb_par));
- current_par_valid[l_fb_info->board_num] = 1;
+ if (var->xres != var->xres_virtual) {
+ DPRINTK("virtual x resolution != physical x resolution not supported\n");
+ return -EINVAL;
}
- *((struct pm3fb_par *) par) = *(l_fb_info->current_par);
-}
-static void pm3fb_set_par(const void *par, struct fb_info_gen *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
- DTRACE;
-
- *(l_fb_info->current_par) = *((struct pm3fb_par *) par);
- current_par_valid[l_fb_info->board_num] = 1;
-
- pm3fb_write_mode(l_fb_info);
-
-#ifdef PM3FB_USE_ACCEL
- pm3fb_init_engine(l_fb_info);
-#endif /* PM3FB_USE_ACCEL */
-}
-
-static void pm3fb_set_color(struct pm3fb_info *l_fb_info,
- unsigned char regno, unsigned char r,
- unsigned char g, unsigned char b)
-{
- DTRACE;
-
- PM3_SLOW_WRITE_REG(PM3RD_PaletteWriteAddress, regno);
- PM3_SLOW_WRITE_REG(PM3RD_PaletteData, r);
- PM3_SLOW_WRITE_REG(PM3RD_PaletteData, g);
- PM3_SLOW_WRITE_REG(PM3RD_PaletteData, b);
-}
-
-static int pm3fb_getcolreg(unsigned regno, unsigned *red, unsigned *green,
- unsigned *blue, unsigned *transp,
- struct fb_info *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
- DTRACE;
-
- if (regno < 256) {
- *red =
- l_fb_info->palette[regno].red << 8 | l_fb_info->
- palette[regno].red;
- *green =
- l_fb_info->palette[regno].green << 8 | l_fb_info->
- palette[regno].green;
- *blue =
- l_fb_info->palette[regno].blue << 8 | l_fb_info->
- palette[regno].blue;
- *transp =
- l_fb_info->palette[regno].transp << 8 | l_fb_info->
- palette[regno].transp;
+ if (var->yres > var->yres_virtual) {
+ DPRINTK("virtual y resolution < physical y resolution not possible\n");
+ return -EINVAL;
}
- return (regno > 255);
+
+ if (var->xoffset) {
+ DPRINTK("xoffset not supported\n");
+ return -EINVAL;
+ }
+
+ if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
+ DPRINTK("interlace not supported\n");
+ return -EINVAL;
+ }
+
+ var->xres = (var->xres + 31) & ~31; /* could sometimes be 8 */
+ lpitch = var->xres * ((var->bits_per_pixel + 7)>>3);
+
+ if (var->xres < 200 || var->xres > 2048) {
+ DPRINTK("width not supported: %u\n", var->xres);
+ return -EINVAL;
+ }
+
+ if (var->yres < 200 || var->yres > 4095) {
+ DPRINTK("height not supported: %u\n", var->yres);
+ return -EINVAL;
+ }
+
+ if (lpitch * var->yres_virtual > info->fix.smem_len) {
+ DPRINTK("no memory for screen (%ux%ux%u)\n",
+ var->xres, var->yres_virtual, var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ if (PICOS2KHZ(var->pixclock) > PM3_MAX_PIXCLOCK) {
+ DPRINTK("pixclock too high (%ldKHz)\n", PICOS2KHZ(var->pixclock));
+ return -EINVAL;
+ }
+
+ var->accel_flags = 0; /* Can't mmap if this is on */
+
+ DPRINTK("Checking graphics mode at %dx%d depth %d\n",
+ var->xres, var->yres, var->bits_per_pixel);
+ return 0;
+}
+
+static int pm3fb_set_par(struct fb_info *info)
+{
+ struct pm3_par *par = info->par;
+ const u32 xres = (info->var.xres + 31) & ~31;
+ const int depth = (info->var.bits_per_pixel + 7) & ~7;
+
+ par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
+ (info->var.yoffset * xres)
+ + info->var.xoffset);
+ par->video = 0;
+
+ if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ par->video |= PM3VideoControl_HSYNC_ACTIVE_HIGH;
+ else
+ par->video |= PM3VideoControl_HSYNC_ACTIVE_LOW;
+
+ if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ par->video |= PM3VideoControl_VSYNC_ACTIVE_HIGH;
+ else
+ par->video |= PM3VideoControl_VSYNC_ACTIVE_LOW;
+
+ if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
+ par->video |= PM3VideoControl_LINE_DOUBLE_ON;
+ else
+ par->video |= PM3VideoControl_LINE_DOUBLE_OFF;
+
+ if (info->var.activate == FB_ACTIVATE_NOW)
+ par->video |= PM3VideoControl_ENABLE;
+ else {
+ par->video |= PM3VideoControl_DISABLE;
+ DPRINTK("PM3Video disabled\n");
+ }
+ switch (depth) {
+ case 8:
+ par->video |= PM3VideoControl_PIXELSIZE_8BIT;
+ break;
+ case 12:
+ case 15:
+ case 16:
+ par->video |= PM3VideoControl_PIXELSIZE_16BIT;
+ break;
+ case 32:
+ par->video |= PM3VideoControl_PIXELSIZE_32BIT;
+ break;
+ default:
+ DPRINTK("Unsupported depth\n");
+ break;
+ }
+
+ info->fix.visual =
+ (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = ((info->var.xres_virtual + 7) & ~7)
+ * depth / 8;
+
+/* pm3fb_clear_memory(info, 0);*/
+ pm3fb_clear_colormap(par, 0, 0, 0);
+ PM3_WRITE_DAC_REG(par, PM3RD_CursorMode,
+ PM3RD_CursorMode_CURSOR_DISABLE);
+ pm3fb_write_mode(info);
+ return 0;
}
static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
+ struct pm3_par *par = info->par;
- DTRACE;
+ if (regno >= 256) /* no. of hw registers */
+ return -EINVAL;
- if (regno < 16) {
- switch (l_fb_info->current_par->depth) {
-#ifdef FBCON_HAS_CFB8
+ /* grayscale works only partially under directcolor */
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ /* Directcolor:
+ * var->{color}.offset contains start of bitfield
+ * var->{color}.length contains length of bitfield
+ * {hardwarespecific} contains width of DAC
+ * pseudo_palette[X] is programmed to (X << red.offset) |
+ * (X << green.offset) |
+ * (X << blue.offset)
+ * RAMDAC[X] is programmed to (red, green, blue)
+ * color depth = SUM(var->{color}.length)
+ *
+ * Pseudocolor:
+ * var->{color}.offset is 0
+ * var->{color}.length contains width of DAC or the number of unique
+ * colors available (color depth)
+ * pseudo_palette is not used
+ * RAMDAC[X] is programmed to (red, green, blue)
+ * color depth = var->{color}.length
+ */
+
+ /*
+ * This is the point where the color is converted to something that
+ * is acceptable by the hardware.
+ */
+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+#undef CNVT_TOHW
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
+ info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
+ u32 v;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ switch (info->var.bits_per_pixel) {
case 8:
break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 12:
- l_fb_info->cmap.cmap12[regno] =
- (((u32) red & 0xf000) >> 4) |
- (((u32) green & 0xf000) >> 8) |
- (((u32) blue & 0xf000) >> 12);
- break;
-
- case 15:
- l_fb_info->cmap.cmap15[regno] =
- (((u32) red & 0xf800) >> 1) |
- (((u32) green & 0xf800) >> 6) |
- (((u32) blue & 0xf800) >> 11);
- break;
-
case 16:
- l_fb_info->cmap.cmap16[regno] =
- ((u32) red & 0xf800) |
- (((u32) green & 0xfc00) >> 5) |
- (((u32) blue & 0xf800) >> 11);
- break;
-#endif
-#ifdef FBCON_HAS_CFB32
+ case 24:
case 32:
- l_fb_info->cmap.cmap32[regno] =
- (((u32) transp & 0xff00) << 16) |
- (((u32) red & 0xff00) << 8) |
- (((u32) green & 0xff00)) |
- (((u32) blue & 0xff00) >> 8);
- break;
-#endif
- default:
- DPRINTK(1, "bad depth %u\n",
- l_fb_info->current_par->depth);
+ ((u32*)(info->pseudo_palette))[regno] = v;
break;
}
+ return 0;
}
- if (regno < 256) {
- l_fb_info->palette[regno].red = red >> 8;
- l_fb_info->palette[regno].green = green >> 8;
- l_fb_info->palette[regno].blue = blue >> 8;
- l_fb_info->palette[regno].transp = transp >> 8;
- if (l_fb_info->current_par->depth == 8)
- pm3fb_set_color(l_fb_info, regno, red >> 8,
- green >> 8, blue >> 8);
- }
- return (regno > 255);
+ else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+ pm3fb_set_color(par, regno, red, green, blue);
+
+ return 0;
}
-static int pm3fb_blank(int blank_mode, struct fb_info_gen *info)
+static int pm3fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
- u32 video;
+ struct pm3_par *par = info->par;
+ const u32 xres = (var->xres + 31) & ~31;
- DTRACE;
+ par->base = pm3fb_shift_bpp(var->bits_per_pixel,
+ (var->yoffset * xres)
+ + var->xoffset);
+ PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base);
+ return 0;
+}
- if (!current_par_valid[l_fb_info->board_num])
- return (1);
-
- video = l_fb_info->current_par->video;
+static int pm3fb_blank(int blank_mode, struct fb_info *info)
+{
+ struct pm3_par *par = info->par;
+ u32 video = par->video;
/*
* Oxygen VX1 - it appears that setting PM3VideoControl and
@@ -3181,454 +663,345 @@
video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
PM3VideoControl_VSYNC_ACTIVE_HIGH;
- if (blank_mode > 0) {
- switch (blank_mode - 1) {
-
- case VESA_NO_BLANKING: /* FIXME */
- video = video & ~(PM3VideoControl_ENABLE);
- break;
-
- case VESA_HSYNC_SUSPEND:
- video = video & ~(PM3VideoControl_HSYNC_MASK |
- PM3VideoControl_BLANK_ACTIVE_LOW);
- break;
- case VESA_VSYNC_SUSPEND:
- video = video & ~(PM3VideoControl_VSYNC_MASK |
- PM3VideoControl_BLANK_ACTIVE_LOW);
- break;
- case VESA_POWERDOWN:
- video = video & ~(PM3VideoControl_HSYNC_MASK |
- PM3VideoControl_VSYNC_MASK |
- PM3VideoControl_BLANK_ACTIVE_LOW);
- break;
- default:
- DPRINTK(1, "Unsupported blanking %d\n",
- blank_mode);
- return (1);
- break;
- }
- }
-
- PM3_SLOW_WRITE_REG(PM3VideoControl, video);
-
- return (0);
-}
-
-static void pm3fb_set_disp(const void *par, struct display *disp,
- struct fb_info_gen *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
- struct pm3fb_par *p = (struct pm3fb_par *) par;
- u32 flags;
-
- DTRACE;
-
- local_irq_save(flags);
- info->info.screen_base = l_fb_info->v_fb;
- switch (p->depth) {
-#ifdef FBCON_HAS_CFB8
- case 8:
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- disp->dispsw = &pm3fb_cfb8;
- else
-#endif /* PM3FB_USE_ACCEL */
- disp->dispsw = &fbcon_cfb8;
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ video = video | PM3VideoControl_ENABLE;
break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 12:
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- disp->dispsw = &pm3fb_cfb16;
- else
-#endif /* PM3FB_USE_ACCEL */
- disp->dispsw = &fbcon_cfb16;
- disp->dispsw_data = l_fb_info->cmap.cmap12;
+ case FB_BLANK_NORMAL: /* FIXME */
+ video = video & ~(PM3VideoControl_ENABLE);
break;
- case 15:
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- disp->dispsw = &pm3fb_cfb16;
- else
-#endif /* PM3FB_USE_ACCEL */
- disp->dispsw = &fbcon_cfb16;
- disp->dispsw_data = l_fb_info->cmap.cmap15;
+ case FB_BLANK_HSYNC_SUSPEND:
+ video = video & ~(PM3VideoControl_HSYNC_MASK |
+ PM3VideoControl_BLANK_ACTIVE_LOW);
break;
- case 16:
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- disp->dispsw = &pm3fb_cfb16;
- else
-#endif /* PM3FB_USE_ACCEL */
- disp->dispsw = &fbcon_cfb16;
- disp->dispsw_data = l_fb_info->cmap.cmap16;
+ case FB_BLANK_VSYNC_SUSPEND:
+ video = video & ~(PM3VideoControl_VSYNC_MASK |
+ PM3VideoControl_BLANK_ACTIVE_LOW);
break;
-#endif
-#ifdef FBCON_HAS_CFB32
- case 32:
-#ifdef PM3FB_USE_ACCEL
- if (!(noaccel[l_fb_info->board_num]))
- disp->dispsw = &pm3fb_cfb32;
- else
-#endif /* PM3FB_USE_ACCEL */
- disp->dispsw = &fbcon_cfb32;
- disp->dispsw_data = l_fb_info->cmap.cmap32;
+ case FB_BLANK_POWERDOWN:
+ video = video & ~(PM3VideoControl_HSYNC_MASK |
+ PM3VideoControl_VSYNC_MASK |
+ PM3VideoControl_BLANK_ACTIVE_LOW);
break;
-#endif /* FBCON_HAS_CFB32 */
default:
- disp->dispsw = &fbcon_dummy;
- DPRINTK(1, "Invalid depth, using fbcon_dummy\n");
- break;
- }
- local_irq_restore(flags);
-}
-
-/* */
-static void pm3fb_detect(void)
-{
- struct pci_dev *dev_array[PM3_MAX_BOARD];
- struct pci_dev *dev = NULL;
- struct pm3fb_info *l_fb_info = &(fb_info[0]);
- unsigned long i, j, done;
-
- DTRACE;
-
- for (i = 0; i < PM3_MAX_BOARD; i++) {
- dev_array[i] = NULL;
- fb_info[i].dev = NULL;
+ DPRINTK("Unsupported blanking %d\n", blank_mode);
+ return 1;
}
- dev = pci_get_device(PCI_VENDOR_ID_3DLABS,
- PCI_DEVICE_ID_3DLABS_PERMEDIA3, dev);
+ PM3_SLOW_WRITE_REG(par,PM3VideoControl, video);
- for (i = 0; ((i < PM3_MAX_BOARD) && dev); i++) {
- dev_array[i] = dev;
- dev = pci_get_device(PCI_VENDOR_ID_3DLABS,
- PCI_DEVICE_ID_3DLABS_PERMEDIA3, dev);
- }
-
- if (dev) { /* more than PM3_MAX_BOARD */
- printk(KERN_WARNING "pm3fb: Warning: more than %d boards found\n",
- PM3_MAX_BOARD);
- }
-
- if (!dev_array[0]) { /* not a single board, abort */
- return;
- }
-
- /* allocate user-defined boards */
- for (i = 0; i < PM3_MAX_BOARD; i++) {
- if ((bus[i] >= 0) && (slot[i] >= 0) && (func[i] >= 0)) {
- for (j = 0; j < PM3_MAX_BOARD; j++) {
- if ((dev_array[j] != NULL) &&
- (dev_array[j]->bus->number == bus[i])
- && (PCI_SLOT(dev_array[j]->devfn) ==
- slot[i])
- && (PCI_FUNC(dev_array[j]->devfn) ==
- func[i])) {
- fb_info[i].dev = dev_array[j];
- dev_array[j] = NULL;
- }
- }
- }
- }
- /* allocate remaining boards */
- for (i = 0; i < PM3_MAX_BOARD; i++) {
- if (fb_info[i].dev == NULL) {
- done = 0;
- for (j = 0; ((j < PM3_MAX_BOARD) && (!done)); j++) {
- if (dev_array[j] != NULL) {
- fb_info[i].dev = dev_array[j];
- dev_array[j] = NULL;
- done = 1;
- }
- }
- }
- }
-
- /* at that point, all PCI Permedia3 are detected and allocated */
- /* now, initialize... or not */
- for (i = 0; i < PM3_MAX_BOARD; i++) {
- l_fb_info = &(fb_info[i]);
- if (l_fb_info->dev && !disable[i]) { /* PCI device was found and not disabled by user */
- DPRINTK(2,
- "found @%lx Vendor %lx Device %lx ; base @ : %lx - %lx - %lx - %lx - %lx - %lx, irq %ld\n",
- (unsigned long) l_fb_info->dev,
- (unsigned long) l_fb_info->dev->vendor,
- (unsigned long) l_fb_info->dev->device,
- (unsigned long)
- pci_resource_start(l_fb_info->dev, 0),
- (unsigned long)
- pci_resource_start(l_fb_info->dev, 1),
- (unsigned long)
- pci_resource_start(l_fb_info->dev, 2),
- (unsigned long)
- pci_resource_start(l_fb_info->dev, 3),
- (unsigned long)
- pci_resource_start(l_fb_info->dev, 4),
- (unsigned long)
- pci_resource_start(l_fb_info->dev, 5),
- (unsigned long) l_fb_info->dev->irq);
-
- l_fb_info->pIOBase =
- (unsigned char *)
- pci_resource_start(l_fb_info->dev, 0);
-#ifdef __BIG_ENDIAN
- l_fb_info->pIOBase += PM3_REGS_SIZE;
-#endif
- l_fb_info->vIOBase = (unsigned char *) -1;
- l_fb_info->p_fb =
- (unsigned char *)
- pci_resource_start(l_fb_info->dev, 1);
- l_fb_info->v_fb = (unsigned char *) -1;
-
- if (!request_mem_region
- ((unsigned long)l_fb_info->p_fb, 64 * 1024 * 1024, /* request full aperture size */
- "pm3fb")) {
- printk
- (KERN_ERR "pm3fb: Error: couldn't request framebuffer memory, board #%ld\n",
- l_fb_info->board_num);
- continue;
- }
- if (!request_mem_region
- ((unsigned long)l_fb_info->pIOBase, PM3_REGS_SIZE,
- "pm3fb I/O regs")) {
- printk
- (KERN_ERR "pm3fb: Error: couldn't request IObase memory, board #%ld\n",
- l_fb_info->board_num);
- continue;
- }
- if (forcesize[l_fb_info->board_num])
- l_fb_info->fb_size = forcesize[l_fb_info->board_num];
-
- l_fb_info->fb_size =
- pm3fb_size_memory(l_fb_info);
- if (l_fb_info->fb_size) {
- (void) pci_enable_device(l_fb_info->dev);
- pm3fb_common_init(l_fb_info);
- } else
- printk(KERN_ERR "pm3fb: memory problem, not enabling board #%ld\n", l_fb_info->board_num);
- }
- }
-}
-
-static int pm3fb_pan_display(const struct fb_var_screeninfo *var,
- struct fb_info_gen *info)
-{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
-
- DTRACE;
-
- if (!current_par_valid[l_fb_info->board_num])
- return -EINVAL;
-
- l_fb_info->current_par->base = /* in 128 bits chunk - i.e. AFTER Shiftbpp */
- pm3fb_Shiftbpp(l_fb_info,
- l_fb_info->current_par->depth,
- (var->yoffset * l_fb_info->current_par->width) +
- var->xoffset);
- PM3_SLOW_WRITE_REG(PM3ScreenBase, l_fb_info->current_par->base);
return 0;
}
-static int pm3fb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
+ /*
+ * Frame buffer operations
+ */
+
+static struct fb_ops pm3fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = pm3fb_check_var,
+ .fb_set_par = pm3fb_set_par,
+ .fb_setcolreg = pm3fb_setcolreg,
+ .fb_pan_display = pm3fb_pan_display,
+ .fb_fillrect = cfb_fillrect, /* Needed !!! */
+ .fb_copyarea = cfb_copyarea, /* Needed !!! */
+ .fb_imageblit = cfb_imageblit, /* Needed !!! */
+ .fb_blank = pm3fb_blank,
+};
+
+/* ------------------------------------------------------------------------- */
+
+ /*
+ * Initialization
+ */
+
+/* mmio register are already mapped when this function is called */
+/* the pm3fb_fix.smem_start is also set */
+static unsigned long pm3fb_size_memory(struct pm3_par *par)
{
- struct pm3fb_info *l_fb_info = (struct pm3fb_info *) info;
- u32 cm, i;
-#ifdef PM3FB_MASTER_DEBUG
- char cc[3];
-#endif /* PM3FB_MASTER_DEBUG */
+ unsigned long memsize = 0, tempBypass, i, temp1, temp2;
+ unsigned char __iomem *screen_mem;
- switch(cmd)
+ pm3fb_fix.smem_len = 64 * 1024 * 1024; /* request full aperture size */
+ /* Linear frame buffer - request region and map it. */
+ if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
+ "pm3fb smem")) {
+ printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
+ return 0;
+ }
+ screen_mem =
+ ioremap_nocache(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ if (!screen_mem) {
+ printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
+ release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ return 0;
+ }
+
+ /* TODO: card-specific stuff, *before* accessing *any* FB memory */
+ /* For Appian Jeronimo 2000 board second head */
+
+ tempBypass = PM3_READ_REG(par, PM3MemBypassWriteMask);
+
+ DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
+
+ PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
+
+ /* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */
+ for (i = 0; i < 32; i++) {
+ fb_writel(i * 0x00345678,
+ (screen_mem + (i * 1048576)));
+ mb();
+ temp1 = fb_readl((screen_mem + (i * 1048576)));
+
+ /* Let's check for wrapover, write will fail at 16MB boundary */
+ if (temp1 == (i * 0x00345678))
+ memsize = i;
+ else
+ break;
+ }
+
+ DPRINTK("First detect pass already got %ld MB\n", memsize + 1);
+
+ if (memsize + 1 == i) {
+ for (i = 0; i < 32; i++) {
+ /* Clear first 32MB ; 0 is 0, no need to byteswap */
+ writel(0x0000000,
+ (screen_mem + (i * 1048576)));
+ mb();
+ }
+
+ for (i = 32; i < 64; i++) {
+ fb_writel(i * 0x00345678,
+ (screen_mem + (i * 1048576)));
+ mb();
+ temp1 =
+ fb_readl((screen_mem + (i * 1048576)));
+ temp2 =
+ fb_readl((screen_mem + ((i - 32) * 1048576)));
+ /* different value, different RAM... */
+ if ((temp1 == (i * 0x00345678)) && (temp2 == 0))
+ memsize = i;
+ else
+ break;
+ }
+ }
+ DPRINTK("Second detect pass got %ld MB\n", memsize + 1);
+
+ PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
+
+ iounmap(screen_mem);
+ release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ memsize = 1048576 * (memsize + 1);
+
+ DPRINTK("Returning 0x%08lx bytes\n", memsize);
+
+ return memsize;
+}
+
+static int __devinit pm3fb_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ struct fb_info *info;
+ struct pm3_par *par;
+ struct device* device = &dev->dev; /* for pci drivers */
+ int err, retval = -ENXIO;
+
+ err = pci_enable_device(dev);
+ if (err) {
+ printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err);
+ return err;
+ }
+ /*
+ * Dynamically allocate info and par
+ */
+ info = framebuffer_alloc(sizeof(struct pm3_par), device);
+
+ if (!info)
+ return -ENOMEM;
+ par = info->par;
+
+ /*
+ * Here we set the screen_base to the virtual memory address
+ * for the framebuffer.
+ */
+ pm3fb_fix.mmio_start = pci_resource_start(dev, 0);
+ pm3fb_fix.mmio_len = PM3_REGS_SIZE;
+
+ /* Registers - request region and map it. */
+ if (!request_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len,
+ "pm3fb regbase")) {
+ printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n");
+ goto err_exit_neither;
+ }
+ par->v_regs =
+ ioremap_nocache(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
+ if (!par->v_regs) {
+ printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n",
+ pm3fb_fix.id);
+ release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
+ goto err_exit_neither;
+ }
+
+#if defined(__BIG_ENDIAN)
+ pm3fb_fix.mmio_start += PM3_REGS_SIZE;
+ DPRINTK("Adjusting register base for big-endian.\n");
+#endif
+ /* Linear frame buffer - request region and map it. */
+ pm3fb_fix.smem_start = pci_resource_start(dev, 1);
+ pm3fb_fix.smem_len = pm3fb_size_memory(par);
+ if (!pm3fb_fix.smem_len)
{
-#ifdef PM3FB_MASTER_DEBUG
- case PM3FBIO_CLEARMEMORY:
- if (copy_from_user(&cm, (void *)arg, sizeof(u32)))
- return(-EFAULT);
- pm3fb_clear_memory(l_fb_info, cm);
- return(0);
- break;
+ printk(KERN_WARNING "pm3fb: Can't find memory on board.\n");
+ goto err_exit_mmio;
+ }
+ if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
+ "pm3fb smem")) {
+ printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
+ goto err_exit_mmio;
+ }
+ info->screen_base =
+ ioremap_nocache(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ if (!info->screen_base) {
+ printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
+ release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ goto err_exit_mmio;
+ }
+ info->screen_size = pm3fb_fix.smem_len;
- case PM3FBIO_CLEARCMAP:
- if (copy_from_user(cc, (void*)arg, 3 * sizeof(char)))
- return(-EFAULT);
- pm3fb_clear_colormap(l_fb_info, cc[0], cc[1], cc[2]);
- return(0);
- break;
-#endif /* PM3FB_MASTER_DEBUG */
+ info->fbops = &pm3fb_ops;
- case PM3FBIO_RESETCHIP:
- cm = 1;
- PM3_SLOW_WRITE_REG(PM3ResetStatus, 1);
- for (i = 0 ; (i < 10000) && cm ; i++)
- {
- PM3_DELAY(10);
- cm = PM3_READ_REG(PM3ResetStatus);
- }
- if (cm)
- {
- printk(KERN_ERR "pm3fb: chip reset failed with status 0x%x\n", cm);
- return(-EIO);
- }
- /* first thing first, reload memory timings */
- pm3fb_write_memory_timings(l_fb_info);
-#ifdef PM3FB_USE_ACCEL
- pm3fb_init_engine(l_fb_info);
-#endif /* PM3FB_USE_ACCEL */
- pm3fb_write_mode(l_fb_info);
- return(0);
- break;
+ par->video = PM3_READ_REG(par, PM3VideoControl);
- default:
- DPRINTK(2, "unknown ioctl: %d (%x)\n", cmd, cmd);
- return(-EINVAL);
+ info->fix = pm3fb_fix;
+ info->pseudo_palette = par->palette;
+ info->flags = FBINFO_DEFAULT;/* | FBINFO_HWACCEL_YPAN;*/
+
+ /*
+ * This should give a reasonable default video mode. The following is
+ * done when we can set a video mode.
+ */
+ if (!mode_option)
+ mode_option = "640x480@60";
+
+ retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
+
+ if (!retval || retval == 4) {
+ retval = -EINVAL;
+ goto err_exit_both;
+ }
+
+ /* This has to been done !!! */
+ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+ retval = -ENOMEM;
+ goto err_exit_both;
+ }
+
+ /*
+ * For drivers that can...
+ */
+ pm3fb_check_var(&info->var, info);
+
+ if (register_framebuffer(info) < 0) {
+ retval = -EINVAL;
+ goto err_exit_all;
+ }
+ printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+ info->fix.id);
+ pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
+ return 0;
+
+ err_exit_all:
+ fb_dealloc_cmap(&info->cmap);
+ err_exit_both:
+ iounmap(info->screen_base);
+ release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
+ err_exit_mmio:
+ iounmap(par->v_regs);
+ release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
+ err_exit_neither:
+ framebuffer_release(info);
+ return retval;
+}
+
+ /*
+ * Cleanup
+ */
+static void __devexit pm3fb_remove(struct pci_dev *dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+
+ if (info) {
+ struct fb_fix_screeninfo *fix = &info->fix;
+ struct pm3_par *par = info->par;
+
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+
+ iounmap(info->screen_base);
+ release_mem_region(fix->smem_start, fix->smem_len);
+ iounmap(par->v_regs);
+ release_mem_region(fix->mmio_start, fix->mmio_len);
+
+ pci_set_drvdata(dev, NULL);
+ framebuffer_release(info);
}
}
-/* ****************************************** */
-/* ***** standard FB API init functions ***** */
-/* ****************************************** */
+static struct pci_device_id pm3fb_id_table[] = {
+ { PCI_VENDOR_ID_3DLABS, 0x0a,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+ 0xff0000, 0 },
+ { 0, }
+};
-int __init pm3fb_setup(char *options)
-{
- long opsi = strlen(options);
+/* For PCI drivers */
+static struct pci_driver pm3fb_driver = {
+ .name = "pm3fb",
+ .id_table = pm3fb_id_table,
+ .probe = pm3fb_probe,
+ .remove = __devexit_p(pm3fb_remove),
+};
- DTRACE;
-
- memcpy(g_options, options,
- ((opsi + 1) >
- PM3_OPTIONS_SIZE) ? PM3_OPTIONS_SIZE : (opsi + 1));
- g_options[PM3_OPTIONS_SIZE - 1] = 0;
-
- return (0);
-}
+MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
int __init pm3fb_init(void)
{
- DTRACE;
+ /*
+ * For kernel boot options (in 'video=pm3fb:<options>' format)
+ */
+#ifndef MODULE
+ char *option = NULL;
- DPRINTK(2, "This is pm3fb.c, CVS version: $Header: /cvsroot/linux/drivers/video/pm3fb.c,v 1.1 2002/02/25 19:11:06 marcelo Exp $");
+ if (fb_get_options("pm3fb", &option))
+ return -ENODEV;
+ pm3fb_setup(option);
+#endif
- pm3fb_real_setup(g_options);
-
- pm3fb_detect();
-
- if (!fb_info[0].dev) { /* not even one board ??? */
- DPRINTK(1, "No PCI Permedia3 board detected\n");
- }
- return (0);
+ return pci_register_driver(&pm3fb_driver);
}
-/* ************************* */
-/* **** Module support ***** */
-/* ************************* */
+static void __exit pm3fb_exit(void)
+{
+ pci_unregister_driver(&pm3fb_driver);
+}
-#ifdef MODULE
-MODULE_AUTHOR("Romain Dolbeau");
-MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
-static char *mode[PM3_MAX_BOARD];
-module_param_array(mode, charp, NULL, 0);
-MODULE_PARM_DESC(mode,"video mode");
-module_param_array(disable, short, NULL, 0);
-MODULE_PARM_DESC(disable,"disable board");
-static short off[PM3_MAX_BOARD];
-module_param_array(off, short, NULL, 0);
-MODULE_PARM_DESC(off,"disable board");
-static char *pciid[PM3_MAX_BOARD];
-module_param_array(pciid, charp, NULL, 0);
-MODULE_PARM_DESC(pciid,"board PCI Id");
-module_param_array(noaccel, short, NULL, 0);
-MODULE_PARM_DESC(noaccel,"disable accel");
-static char *font[PM3_MAX_BOARD];
-module_param_array(font, charp, NULL, 0);
-MODULE_PARM_DESC(font,"choose font");
-module_param(depth, short, NULL, 0);
-MODULE_PARM_DESC(depth,"boot-time depth");
-module_param(printtimings, short, NULL, 0);
-MODULE_PARM_DESC(printtimings, "print the memory timings of the card(s)");
-module_param(forcesize, short, NULL, 0);
-MODULE_PARM_DESC(forcesize, "force specified memory size");
+#ifndef MODULE
+ /*
+ * Setup
+ */
+
/*
-MODULE_SUPPORTED_DEVICE("Permedia3 PCI boards")
-MODULE_GENERIC_TABLE(gtype,name)
-MODULE_DEVICE_TABLE(type,name)
-*/
-
-void pm3fb_build_options(void)
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+int __init pm3fb_setup(char *options)
{
- int i;
- char ts[128];
-
- strcpy(g_options, "pm3fb");
- for (i = 0; i < PM3_MAX_BOARD ; i++)
- {
- if (mode[i])
- {
- sprintf(ts, ",mode:%d:%s", i, mode[i]);
- strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
- }
- if (disable[i] || off[i])
- {
- sprintf(ts, ",disable:%d:", i);
- strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
- }
- if (pciid[i])
- {
- sprintf(ts, ",pciid:%d:%s", i, pciid[i]);
- strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
- }
- if (noaccel[i])
- {
- sprintf(ts, ",noaccel:%d:", i);
- strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
- }
- if (font[i])
- {
- sprintf(ts, ",font:%d:%s", i, font[i]);
- strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
- }
- if (depth[i])
- {
- sprintf(ts, ",depth:%d:%d", i, depth[i]);
- strncat(g_options, ts, PM3_OPTIONS_SIZE - strlen(g_options));
- }
- }
- g_options[PM3_OPTIONS_SIZE - 1] = '\0';
- DPRINTK(1, "pm3fb use options: %s\n", g_options);
-}
-
-int init_module(void)
-{
- DTRACE;
-
- pm3fb_build_options();
-
- pm3fb_init();
-
+ /* Parse user speficied options (`video=pm3fb:') */
return 0;
}
-
-void cleanup_module(void)
-{
- DTRACE;
- {
- unsigned long i;
- struct pm3fb_info *l_fb_info;
- for (i = 0; i < PM3_MAX_BOARD; i++) {
- l_fb_info = &(fb_info[i]);
- pci_dev_put(l_fb_info->dev);
- if (l_fb_info->dev != NULL && !(disable[l_fb_info->board_num])) {
- if (l_fb_info->vIOBase != (unsigned char *) -1) {
- pm3fb_unmapIO(l_fb_info);
- release_mem_region(l_fb_info->p_fb,
- l_fb_info->fb_size);
- release_mem_region(l_fb_info->pIOBase,
- PM3_REGS_SIZE);
- }
- unregister_framebuffer(&l_fb_info->gen.info);
- }
- }
- }
-}
#endif /* MODULE */
+
+module_init(pm3fb_init);
+module_exit(pm3fb_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c
index 76e6ce3..a0e22ac 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/riva/rivafb-i2c.c
@@ -70,8 +70,6 @@
if (VGA_RD08(par->riva.PCIO, 0x3d5) & 0x04)
val = 1;
- val = VGA_RD08(par->riva.PCIO, 0x3d5);
-
return val;
}
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index c287a9a..ca75b3a 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -1,4 +1,5 @@
menu "Dallas's 1-wire bus"
+ depends on HAS_IOMEM
config W1
tristate "Dallas's 1-wire support"
diff --git a/fs/Makefile b/fs/Makefile
index 9edf411..720c29d 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -22,6 +22,10 @@
obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_INOTIFY_USER) += inotify_user.o
obj-$(CONFIG_EPOLL) += eventpoll.o
+obj-$(CONFIG_ANON_INODES) += anon_inodes.o
+obj-$(CONFIG_SIGNALFD) += signalfd.o
+obj-$(CONFIG_TIMERFD) += timerfd.o
+obj-$(CONFIG_EVENTFD) += eventfd.o
obj-$(CONFIG_COMPAT) += compat.o compat_ioctl.o
nfsd-$(CONFIG_NFSD) := nfsctl.o
diff --git a/fs/afs/afs.h b/fs/afs/afs.h
index 52d0752..2452579 100644
--- a/fs/afs/afs.h
+++ b/fs/afs/afs.h
@@ -16,6 +16,9 @@
#define AFS_MAXCELLNAME 64 /* maximum length of a cell name */
#define AFS_MAXVOLNAME 64 /* maximum length of a volume name */
+#define AFSNAMEMAX 256 /* maximum length of a filename plus NUL */
+#define AFSPATHMAX 1024 /* maximum length of a pathname plus NUL */
+#define AFSOPAQUEMAX 1024 /* maximum length of an opaque field */
typedef unsigned afs_volid_t;
typedef unsigned afs_vnodeid_t;
@@ -143,4 +146,24 @@
time_t creation; /* volume creation time */
};
+/*
+ * AFS volume status record
+ */
+struct afs_volume_status {
+ u32 vid; /* volume ID */
+ u32 parent_id; /* parent volume ID */
+ u8 online; /* true if volume currently online and available */
+ u8 in_service; /* true if volume currently in service */
+ u8 blessed; /* same as in_service */
+ u8 needs_salvage; /* true if consistency checking required */
+ u32 type; /* volume type (afs_voltype_t) */
+ u32 min_quota; /* minimum space set aside (blocks) */
+ u32 max_quota; /* maximum space this volume may occupy (blocks) */
+ u32 blocks_in_use; /* space this volume currently occupies (blocks) */
+ u32 part_blocks_avail; /* space available in volume's partition */
+ u32 part_max_blocks; /* size of volume's partition */
+};
+
+#define AFS_BLOCK_SIZE 1024
+
#endif /* AFS_H */
diff --git a/fs/afs/afs_fs.h b/fs/afs/afs_fs.h
index 2198006..a18c374 100644
--- a/fs/afs/afs_fs.h
+++ b/fs/afs/afs_fs.h
@@ -28,9 +28,12 @@
FSMAKEDIR = 141, /* AFS Create a directory */
FSREMOVEDIR = 142, /* AFS Remove a directory */
FSGIVEUPCALLBACKS = 147, /* AFS Discard callback promises */
- FSGETVOLUMEINFO = 148, /* AFS Get root volume information */
+ FSGETVOLUMEINFO = 148, /* AFS Get information about a volume */
+ FSGETVOLUMESTATUS = 149, /* AFS Get volume status information */
FSGETROOTVOLUME = 151, /* AFS Get root volume name */
FSLOOKUP = 161, /* AFS lookup file in directory */
+ FSFETCHDATA64 = 65537, /* AFS Fetch file data */
+ FSSTOREDATA64 = 65538, /* AFS Store file data */
};
enum AFS_FS_Errors {
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 2fb3127..719af4f 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -497,7 +497,7 @@
ASSERTCMP(dentry->d_inode, ==, NULL);
- if (dentry->d_name.len > 255) {
+ if (dentry->d_name.len >= AFSNAMEMAX) {
_leave(" = -ENAMETOOLONG");
return ERR_PTR(-ENAMETOOLONG);
}
@@ -736,7 +736,7 @@
dvnode->fid.vid, dvnode->fid.vnode, dentry->d_name.name, mode);
ret = -ENAMETOOLONG;
- if (dentry->d_name.len > 255)
+ if (dentry->d_name.len >= AFSNAMEMAX)
goto error;
key = afs_request_key(dvnode->volume->cell);
@@ -801,7 +801,7 @@
dvnode->fid.vid, dvnode->fid.vnode, dentry->d_name.name);
ret = -ENAMETOOLONG;
- if (dentry->d_name.len > 255)
+ if (dentry->d_name.len >= AFSNAMEMAX)
goto error;
key = afs_request_key(dvnode->volume->cell);
@@ -847,7 +847,7 @@
dvnode->fid.vid, dvnode->fid.vnode, dentry->d_name.name);
ret = -ENAMETOOLONG;
- if (dentry->d_name.len > 255)
+ if (dentry->d_name.len >= AFSNAMEMAX)
goto error;
key = afs_request_key(dvnode->volume->cell);
@@ -921,7 +921,7 @@
dvnode->fid.vid, dvnode->fid.vnode, dentry->d_name.name, mode);
ret = -ENAMETOOLONG;
- if (dentry->d_name.len > 255)
+ if (dentry->d_name.len >= AFSNAMEMAX)
goto error;
key = afs_request_key(dvnode->volume->cell);
@@ -990,7 +990,7 @@
dentry->d_name.name);
ret = -ENAMETOOLONG;
- if (dentry->d_name.len > 255)
+ if (dentry->d_name.len >= AFSNAMEMAX)
goto error;
key = afs_request_key(dvnode->volume->cell);
@@ -1038,11 +1038,11 @@
content);
ret = -ENAMETOOLONG;
- if (dentry->d_name.len > 255)
+ if (dentry->d_name.len >= AFSNAMEMAX)
goto error;
ret = -EINVAL;
- if (strlen(content) > 1023)
+ if (strlen(content) >= AFSPATHMAX)
goto error;
key = afs_request_key(dvnode->volume->cell);
@@ -1112,7 +1112,7 @@
new_dentry->d_name.name);
ret = -ENAMETOOLONG;
- if (new_dentry->d_name.len > 255)
+ if (new_dentry->d_name.len >= AFSNAMEMAX)
goto error;
key = afs_request_key(orig_dvnode->volume->cell);
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 3e25795..9c0e721 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -236,7 +236,7 @@
{
int ret = 1;
- kenter("{%lu},%lu", page->index, offset);
+ _enter("{%lu},%lu", page->index, offset);
BUG_ON(!PageLocked(page));
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 025b190..5dff130 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -202,6 +202,29 @@
}
/*
+ * decode an AFSFetchVolumeStatus block
+ */
+static void xdr_decode_AFSFetchVolumeStatus(const __be32 **_bp,
+ struct afs_volume_status *vs)
+{
+ const __be32 *bp = *_bp;
+
+ vs->vid = ntohl(*bp++);
+ vs->parent_id = ntohl(*bp++);
+ vs->online = ntohl(*bp++);
+ vs->in_service = ntohl(*bp++);
+ vs->blessed = ntohl(*bp++);
+ vs->needs_salvage = ntohl(*bp++);
+ vs->type = ntohl(*bp++);
+ vs->min_quota = ntohl(*bp++);
+ vs->max_quota = ntohl(*bp++);
+ vs->blocks_in_use = ntohl(*bp++);
+ vs->part_blocks_avail = ntohl(*bp++);
+ vs->part_max_blocks = ntohl(*bp++);
+ *_bp = bp;
+}
+
+/*
* deliver reply data to an FS.FetchStatus
*/
static int afs_deliver_fs_fetch_status(struct afs_call *call,
@@ -293,9 +316,33 @@
case 0:
call->offset = 0;
call->unmarshall++;
+ if (call->operation_ID != FSFETCHDATA64) {
+ call->unmarshall++;
+ goto no_msw;
+ }
- /* extract the returned data length */
+ /* extract the upper part of the returned data length of an
+ * FSFETCHDATA64 op (which should always be 0 using this
+ * client) */
case 1:
+ _debug("extract data length (MSW)");
+ ret = afs_extract_data(call, skb, last, &call->tmp, 4);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->count = ntohl(call->tmp);
+ _debug("DATA length MSW: %u", call->count);
+ if (call->count > 0)
+ return -EBADMSG;
+ call->offset = 0;
+ call->unmarshall++;
+
+ no_msw:
+ /* extract the returned data length */
+ case 2:
_debug("extract data length");
ret = afs_extract_data(call, skb, last, &call->tmp, 4);
switch (ret) {
@@ -312,7 +359,7 @@
call->unmarshall++;
/* extract the returned data */
- case 2:
+ case 3:
_debug("extract data");
if (call->count > 0) {
page = call->reply3;
@@ -331,7 +378,7 @@
call->unmarshall++;
/* extract the metadata */
- case 3:
+ case 4:
ret = afs_extract_data(call, skb, last, call->buffer,
(21 + 3 + 6) * 4);
switch (ret) {
@@ -349,7 +396,7 @@
call->offset = 0;
call->unmarshall++;
- case 4:
+ case 5:
_debug("trailer");
if (skb->len != 0)
return -EBADMSG;
@@ -381,6 +428,56 @@
.destructor = afs_flat_call_destructor,
};
+static const struct afs_call_type afs_RXFSFetchData64 = {
+ .name = "FS.FetchData64",
+ .deliver = afs_deliver_fs_fetch_data,
+ .abort_to_error = afs_abort_to_error,
+ .destructor = afs_flat_call_destructor,
+};
+
+/*
+ * fetch data from a very large file
+ */
+static int afs_fs_fetch_data64(struct afs_server *server,
+ struct key *key,
+ struct afs_vnode *vnode,
+ off_t offset, size_t length,
+ struct page *buffer,
+ const struct afs_wait_mode *wait_mode)
+{
+ struct afs_call *call;
+ __be32 *bp;
+
+ _enter("");
+
+ ASSERTCMP(length, <, ULONG_MAX);
+
+ call = afs_alloc_flat_call(&afs_RXFSFetchData64, 32, (21 + 3 + 6) * 4);
+ if (!call)
+ return -ENOMEM;
+
+ call->key = key;
+ call->reply = vnode;
+ call->reply2 = NULL; /* volsync */
+ call->reply3 = buffer;
+ call->service_id = FS_SERVICE;
+ call->port = htons(AFS_FS_PORT);
+ call->operation_ID = FSFETCHDATA64;
+
+ /* marshall the parameters */
+ bp = call->request;
+ bp[0] = htonl(FSFETCHDATA64);
+ bp[1] = htonl(vnode->fid.vid);
+ bp[2] = htonl(vnode->fid.vnode);
+ bp[3] = htonl(vnode->fid.unique);
+ bp[4] = htonl(upper_32_bits(offset));
+ bp[5] = htonl((u32) offset);
+ bp[6] = 0;
+ bp[7] = htonl((u32) length);
+
+ return afs_make_call(&server->addr, call, GFP_NOFS, wait_mode);
+}
+
/*
* fetch data from a file
*/
@@ -394,6 +491,10 @@
struct afs_call *call;
__be32 *bp;
+ if (upper_32_bits(offset) || upper_32_bits(offset + length))
+ return afs_fs_fetch_data64(server, key, vnode, offset, length,
+ buffer, wait_mode);
+
_enter("");
call = afs_alloc_flat_call(&afs_RXFSFetchData, 24, (21 + 3 + 6) * 4);
@@ -406,6 +507,7 @@
call->reply3 = buffer;
call->service_id = FS_SERVICE;
call->port = htons(AFS_FS_PORT);
+ call->operation_ID = FSFETCHDATA;
/* marshall the parameters */
bp = call->request;
@@ -1032,6 +1134,73 @@
.destructor = afs_flat_call_destructor,
};
+static const struct afs_call_type afs_RXFSStoreData64 = {
+ .name = "FS.StoreData64",
+ .deliver = afs_deliver_fs_store_data,
+ .abort_to_error = afs_abort_to_error,
+ .destructor = afs_flat_call_destructor,
+};
+
+/*
+ * store a set of pages to a very large file
+ */
+static int afs_fs_store_data64(struct afs_server *server,
+ struct afs_writeback *wb,
+ pgoff_t first, pgoff_t last,
+ unsigned offset, unsigned to,
+ loff_t size, loff_t pos, loff_t i_size,
+ const struct afs_wait_mode *wait_mode)
+{
+ struct afs_vnode *vnode = wb->vnode;
+ struct afs_call *call;
+ __be32 *bp;
+
+ _enter(",%x,{%x:%u},,",
+ key_serial(wb->key), vnode->fid.vid, vnode->fid.vnode);
+
+ call = afs_alloc_flat_call(&afs_RXFSStoreData64,
+ (4 + 6 + 3 * 2) * 4,
+ (21 + 6) * 4);
+ if (!call)
+ return -ENOMEM;
+
+ call->wb = wb;
+ call->key = wb->key;
+ call->reply = vnode;
+ call->service_id = FS_SERVICE;
+ call->port = htons(AFS_FS_PORT);
+ call->mapping = vnode->vfs_inode.i_mapping;
+ call->first = first;
+ call->last = last;
+ call->first_offset = offset;
+ call->last_to = to;
+ call->send_pages = true;
+ call->store_version = vnode->status.data_version + 1;
+
+ /* marshall the parameters */
+ bp = call->request;
+ *bp++ = htonl(FSSTOREDATA64);
+ *bp++ = htonl(vnode->fid.vid);
+ *bp++ = htonl(vnode->fid.vnode);
+ *bp++ = htonl(vnode->fid.unique);
+
+ *bp++ = 0; /* mask */
+ *bp++ = 0; /* mtime */
+ *bp++ = 0; /* owner */
+ *bp++ = 0; /* group */
+ *bp++ = 0; /* unix mode */
+ *bp++ = 0; /* segment size */
+
+ *bp++ = htonl(pos >> 32);
+ *bp++ = htonl((u32) pos);
+ *bp++ = htonl(size >> 32);
+ *bp++ = htonl((u32) size);
+ *bp++ = htonl(i_size >> 32);
+ *bp++ = htonl((u32) i_size);
+
+ return afs_make_call(&server->addr, call, GFP_NOFS, wait_mode);
+}
+
/*
* store a set of pages
*/
@@ -1062,7 +1231,9 @@
(unsigned long long) size, (unsigned long long) pos,
(unsigned long long) i_size);
- BUG_ON(i_size > 0xffffffff); // TODO: use 64-bit store
+ if (pos >> 32 || i_size >> 32 || size >> 32 || (pos + size) >> 32)
+ return afs_fs_store_data64(server, wb, first, last, offset, to,
+ size, pos, i_size, wait_mode);
call = afs_alloc_flat_call(&afs_RXFSStoreData,
(4 + 6 + 3) * 4,
@@ -1158,6 +1329,61 @@
.destructor = afs_flat_call_destructor,
};
+static const struct afs_call_type afs_RXFSStoreData64_as_Status = {
+ .name = "FS.StoreData64",
+ .deliver = afs_deliver_fs_store_status,
+ .abort_to_error = afs_abort_to_error,
+ .destructor = afs_flat_call_destructor,
+};
+
+/*
+ * set the attributes on a very large file, using FS.StoreData rather than
+ * FS.StoreStatus so as to alter the file size also
+ */
+static int afs_fs_setattr_size64(struct afs_server *server, struct key *key,
+ struct afs_vnode *vnode, struct iattr *attr,
+ const struct afs_wait_mode *wait_mode)
+{
+ struct afs_call *call;
+ __be32 *bp;
+
+ _enter(",%x,{%x:%u},,",
+ key_serial(key), vnode->fid.vid, vnode->fid.vnode);
+
+ ASSERT(attr->ia_valid & ATTR_SIZE);
+
+ call = afs_alloc_flat_call(&afs_RXFSStoreData64_as_Status,
+ (4 + 6 + 3 * 2) * 4,
+ (21 + 6) * 4);
+ if (!call)
+ return -ENOMEM;
+
+ call->key = key;
+ call->reply = vnode;
+ call->service_id = FS_SERVICE;
+ call->port = htons(AFS_FS_PORT);
+ call->store_version = vnode->status.data_version + 1;
+ call->operation_ID = FSSTOREDATA;
+
+ /* marshall the parameters */
+ bp = call->request;
+ *bp++ = htonl(FSSTOREDATA64);
+ *bp++ = htonl(vnode->fid.vid);
+ *bp++ = htonl(vnode->fid.vnode);
+ *bp++ = htonl(vnode->fid.unique);
+
+ xdr_encode_AFS_StoreStatus(&bp, attr);
+
+ *bp++ = 0; /* position of start of write */
+ *bp++ = 0;
+ *bp++ = 0; /* size of write */
+ *bp++ = 0;
+ *bp++ = htonl(attr->ia_size >> 32); /* new file length */
+ *bp++ = htonl((u32) attr->ia_size);
+
+ return afs_make_call(&server->addr, call, GFP_NOFS, wait_mode);
+}
+
/*
* set the attributes on a file, using FS.StoreData rather than FS.StoreStatus
* so as to alter the file size also
@@ -1173,7 +1399,9 @@
key_serial(key), vnode->fid.vid, vnode->fid.vnode);
ASSERT(attr->ia_valid & ATTR_SIZE);
- ASSERTCMP(attr->ia_size, <=, 0xffffffff); // TODO: use 64-bit store
+ if (attr->ia_size >> 32)
+ return afs_fs_setattr_size64(server, key, vnode, attr,
+ wait_mode);
call = afs_alloc_flat_call(&afs_RXFSStoreData_as_Status,
(4 + 6 + 3) * 4,
@@ -1245,3 +1473,278 @@
return afs_make_call(&server->addr, call, GFP_NOFS, wait_mode);
}
+
+/*
+ * deliver reply data to an FS.GetVolumeStatus
+ */
+static int afs_deliver_fs_get_volume_status(struct afs_call *call,
+ struct sk_buff *skb, bool last)
+{
+ const __be32 *bp;
+ char *p;
+ int ret;
+
+ _enter("{%u},{%u},%d", call->unmarshall, skb->len, last);
+
+ switch (call->unmarshall) {
+ case 0:
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the returned status record */
+ case 1:
+ _debug("extract status");
+ ret = afs_extract_data(call, skb, last, call->buffer,
+ 12 * 4);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ bp = call->buffer;
+ xdr_decode_AFSFetchVolumeStatus(&bp, call->reply2);
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the volume name length */
+ case 2:
+ ret = afs_extract_data(call, skb, last, &call->tmp, 4);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->count = ntohl(call->tmp);
+ _debug("volname length: %u", call->count);
+ if (call->count >= AFSNAMEMAX)
+ return -EBADMSG;
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the volume name */
+ case 3:
+ _debug("extract volname");
+ if (call->count > 0) {
+ ret = afs_extract_data(call, skb, last, call->reply3,
+ call->count);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+ }
+
+ p = call->reply3;
+ p[call->count] = 0;
+ _debug("volname '%s'", p);
+
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the volume name padding */
+ if ((call->count & 3) == 0) {
+ call->unmarshall++;
+ goto no_volname_padding;
+ }
+ call->count = 4 - (call->count & 3);
+
+ case 4:
+ ret = afs_extract_data(call, skb, last, call->buffer,
+ call->count);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->offset = 0;
+ call->unmarshall++;
+ no_volname_padding:
+
+ /* extract the offline message length */
+ case 5:
+ ret = afs_extract_data(call, skb, last, &call->tmp, 4);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->count = ntohl(call->tmp);
+ _debug("offline msg length: %u", call->count);
+ if (call->count >= AFSNAMEMAX)
+ return -EBADMSG;
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the offline message */
+ case 6:
+ _debug("extract offline");
+ if (call->count > 0) {
+ ret = afs_extract_data(call, skb, last, call->reply3,
+ call->count);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+ }
+
+ p = call->reply3;
+ p[call->count] = 0;
+ _debug("offline '%s'", p);
+
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the offline message padding */
+ if ((call->count & 3) == 0) {
+ call->unmarshall++;
+ goto no_offline_padding;
+ }
+ call->count = 4 - (call->count & 3);
+
+ case 7:
+ ret = afs_extract_data(call, skb, last, call->buffer,
+ call->count);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->offset = 0;
+ call->unmarshall++;
+ no_offline_padding:
+
+ /* extract the message of the day length */
+ case 8:
+ ret = afs_extract_data(call, skb, last, &call->tmp, 4);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->count = ntohl(call->tmp);
+ _debug("motd length: %u", call->count);
+ if (call->count >= AFSNAMEMAX)
+ return -EBADMSG;
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the message of the day */
+ case 9:
+ _debug("extract motd");
+ if (call->count > 0) {
+ ret = afs_extract_data(call, skb, last, call->reply3,
+ call->count);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+ }
+
+ p = call->reply3;
+ p[call->count] = 0;
+ _debug("motd '%s'", p);
+
+ call->offset = 0;
+ call->unmarshall++;
+
+ /* extract the message of the day padding */
+ if ((call->count & 3) == 0) {
+ call->unmarshall++;
+ goto no_motd_padding;
+ }
+ call->count = 4 - (call->count & 3);
+
+ case 10:
+ ret = afs_extract_data(call, skb, last, call->buffer,
+ call->count);
+ switch (ret) {
+ case 0: break;
+ case -EAGAIN: return 0;
+ default: return ret;
+ }
+
+ call->offset = 0;
+ call->unmarshall++;
+ no_motd_padding:
+
+ case 11:
+ _debug("trailer %d", skb->len);
+ if (skb->len != 0)
+ return -EBADMSG;
+ break;
+ }
+
+ if (!last)
+ return 0;
+
+ _leave(" = 0 [done]");
+ return 0;
+}
+
+/*
+ * destroy an FS.GetVolumeStatus call
+ */
+static void afs_get_volume_status_call_destructor(struct afs_call *call)
+{
+ kfree(call->reply3);
+ call->reply3 = NULL;
+ afs_flat_call_destructor(call);
+}
+
+/*
+ * FS.GetVolumeStatus operation type
+ */
+static const struct afs_call_type afs_RXFSGetVolumeStatus = {
+ .name = "FS.GetVolumeStatus",
+ .deliver = afs_deliver_fs_get_volume_status,
+ .abort_to_error = afs_abort_to_error,
+ .destructor = afs_get_volume_status_call_destructor,
+};
+
+/*
+ * fetch the status of a volume
+ */
+int afs_fs_get_volume_status(struct afs_server *server,
+ struct key *key,
+ struct afs_vnode *vnode,
+ struct afs_volume_status *vs,
+ const struct afs_wait_mode *wait_mode)
+{
+ struct afs_call *call;
+ __be32 *bp;
+ void *tmpbuf;
+
+ _enter("");
+
+ tmpbuf = kmalloc(AFSOPAQUEMAX, GFP_KERNEL);
+ if (!tmpbuf)
+ return -ENOMEM;
+
+ call = afs_alloc_flat_call(&afs_RXFSGetVolumeStatus, 2 * 4, 12 * 4);
+ if (!call) {
+ kfree(tmpbuf);
+ return -ENOMEM;
+ }
+
+ call->key = key;
+ call->reply = vnode;
+ call->reply2 = vs;
+ call->reply3 = tmpbuf;
+ call->service_id = FS_SERVICE;
+ call->port = htons(AFS_FS_PORT);
+
+ /* marshall the parameters */
+ bp = call->request;
+ bp[0] = htonl(FSGETVOLUMESTATUS);
+ bp[1] = htonl(vnode->fid.vid);
+
+ return afs_make_call(&server->addr, call, GFP_NOFS, wait_mode);
+}
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 515a5d1..47f5fed 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -209,11 +209,15 @@
*/
void afs_zap_data(struct afs_vnode *vnode)
{
- _enter("zap data {%x:%u}", vnode->fid.vid, vnode->fid.vnode);
+ _enter("{%x:%u}", vnode->fid.vid, vnode->fid.vnode);
/* nuke all the non-dirty pages that aren't locked, mapped or being
- * written back */
- invalidate_remote_inode(&vnode->vfs_inode);
+ * written back in a regular file and completely discard the pages in a
+ * directory or symlink */
+ if (S_ISREG(vnode->vfs_inode.i_mode))
+ invalidate_remote_inode(&vnode->vfs_inode);
+ else
+ invalidate_inode_pages2(vnode->vfs_inode.i_mapping);
}
/*
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index a30d4fa..4953ba5 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -506,6 +506,10 @@
extern int afs_fs_setattr(struct afs_server *, struct key *,
struct afs_vnode *, struct iattr *,
const struct afs_wait_mode *);
+extern int afs_fs_get_volume_status(struct afs_server *, struct key *,
+ struct afs_vnode *,
+ struct afs_volume_status *,
+ const struct afs_wait_mode *);
/*
* inode.c
@@ -672,6 +676,8 @@
extern int afs_vnode_store_data(struct afs_writeback *, pgoff_t, pgoff_t,
unsigned, unsigned);
extern int afs_vnode_setattr(struct afs_vnode *, struct key *, struct iattr *);
+extern int afs_vnode_get_volume_status(struct afs_vnode *, struct key *,
+ struct afs_volume_status *);
/*
* volume.c
diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c
index 04189c4..1b36f45 100644
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -294,7 +294,7 @@
put_page(pages[loop]);
if (ret < 0)
break;
- } while (first < last);
+ } while (first <= last);
_leave(" = %d", ret);
return ret;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index d24be33..579af63 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -21,22 +21,20 @@
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/parser.h>
+#include <linux/statfs.h>
#include "internal.h"
#define AFS_FS_MAGIC 0x6B414653 /* 'kAFS' */
static void afs_i_init_once(void *foo, struct kmem_cache *cachep,
unsigned long flags);
-
static int afs_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name,
void *data, struct vfsmount *mnt);
-
static struct inode *afs_alloc_inode(struct super_block *sb);
-
static void afs_put_super(struct super_block *sb);
-
static void afs_destroy_inode(struct inode *inode);
+static int afs_statfs(struct dentry *dentry, struct kstatfs *buf);
struct file_system_type afs_fs_type = {
.owner = THIS_MODULE,
@@ -47,7 +45,7 @@
};
static const struct super_operations afs_super_ops = {
- .statfs = simple_statfs,
+ .statfs = afs_statfs,
.alloc_inode = afs_alloc_inode,
.drop_inode = generic_delete_inode,
.write_inode = afs_write_inode,
@@ -488,6 +486,7 @@
vnode->flags = 1 << AFS_VNODE_UNSET;
vnode->cb_promised = false;
+ _leave(" = %p", &vnode->vfs_inode);
return &vnode->vfs_inode;
}
@@ -498,7 +497,7 @@
{
struct afs_vnode *vnode = AFS_FS_I(inode);
- _enter("{%lu}", inode->i_ino);
+ _enter("%p{%x:%u}", inode, vnode->fid.vid, vnode->fid.vnode);
_debug("DESTROY INODE %p", inode);
@@ -507,3 +506,36 @@
kmem_cache_free(afs_inode_cachep, vnode);
atomic_dec(&afs_count_active_inodes);
}
+
+/*
+ * return information about an AFS volume
+ */
+static int afs_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+ struct afs_volume_status vs;
+ struct afs_vnode *vnode = AFS_FS_I(dentry->d_inode);
+ struct key *key;
+ int ret;
+
+ key = afs_request_key(vnode->volume->cell);
+ if (IS_ERR(key))
+ return PTR_ERR(key);
+
+ ret = afs_vnode_get_volume_status(vnode, key, &vs);
+ key_put(key);
+ if (ret < 0) {
+ _leave(" = %d", ret);
+ return ret;
+ }
+
+ buf->f_type = dentry->d_sb->s_magic;
+ buf->f_bsize = AFS_BLOCK_SIZE;
+ buf->f_namelen = AFSNAMEMAX - 1;
+
+ if (vs.max_quota == 0)
+ buf->f_blocks = vs.part_max_blocks;
+ else
+ buf->f_blocks = vs.max_quota;
+ buf->f_bavail = buf->f_bfree = buf->f_blocks - vs.blocks_in_use;
+ return 0;
+}
diff --git a/fs/afs/vnode.c b/fs/afs/vnode.c
index ec81466..c36c98c 100644
--- a/fs/afs/vnode.c
+++ b/fs/afs/vnode.c
@@ -175,24 +175,33 @@
{
struct afs_server *server;
+ _enter("{%p}", vnode->server);
+
set_bit(AFS_VNODE_DELETED, &vnode->flags);
server = vnode->server;
- if (vnode->cb_promised) {
- spin_lock(&server->cb_lock);
+ if (server) {
if (vnode->cb_promised) {
- rb_erase(&vnode->cb_promise, &server->cb_promises);
- vnode->cb_promised = false;
+ spin_lock(&server->cb_lock);
+ if (vnode->cb_promised) {
+ rb_erase(&vnode->cb_promise,
+ &server->cb_promises);
+ vnode->cb_promised = false;
+ }
+ spin_unlock(&server->cb_lock);
}
- spin_unlock(&server->cb_lock);
+
+ spin_lock(&server->fs_lock);
+ rb_erase(&vnode->server_rb, &server->fs_vnodes);
+ spin_unlock(&server->fs_lock);
+
+ vnode->server = NULL;
+ afs_put_server(server);
+ } else {
+ ASSERT(!vnode->cb_promised);
}
- spin_lock(&vnode->server->fs_lock);
- rb_erase(&vnode->server_rb, &vnode->server->fs_vnodes);
- spin_unlock(&vnode->server->fs_lock);
-
- vnode->server = NULL;
- afs_put_server(server);
+ _leave("");
}
/*
@@ -225,7 +234,7 @@
*/
static void afs_vnode_status_update_failed(struct afs_vnode *vnode, int ret)
{
- _enter("%p,%d", vnode, ret);
+ _enter("{%x:%u},%d", vnode->fid.vid, vnode->fid.vnode, ret);
spin_lock(&vnode->lock);
@@ -860,3 +869,55 @@
spin_unlock(&vnode->lock);
return PTR_ERR(server);
}
+
+/*
+ * get the status of a volume
+ */
+int afs_vnode_get_volume_status(struct afs_vnode *vnode, struct key *key,
+ struct afs_volume_status *vs)
+{
+ struct afs_server *server;
+ int ret;
+
+ _enter("%s{%x:%u.%u},%x,",
+ vnode->volume->vlocation->vldb.name,
+ vnode->fid.vid,
+ vnode->fid.vnode,
+ vnode->fid.unique,
+ key_serial(key));
+
+ /* this op will fetch the status */
+ spin_lock(&vnode->lock);
+ vnode->update_cnt++;
+ spin_unlock(&vnode->lock);
+
+ do {
+ /* pick a server to query */
+ server = afs_volume_pick_fileserver(vnode);
+ if (IS_ERR(server))
+ goto no_server;
+
+ _debug("USING SERVER: %08x\n", ntohl(server->addr.s_addr));
+
+ ret = afs_fs_get_volume_status(server, key, vnode, vs, &afs_sync_call);
+
+ } while (!afs_volume_release_fileserver(vnode, server, ret));
+
+ /* adjust the flags */
+ if (ret == 0) {
+ afs_vnode_finalise_status_update(vnode, server);
+ afs_put_server(server);
+ } else {
+ afs_vnode_status_update_failed(vnode, ret);
+ }
+
+ _leave(" = %d", ret);
+ return ret;
+
+no_server:
+ spin_lock(&vnode->lock);
+ vnode->update_cnt--;
+ ASSERTCMP(vnode->update_cnt, >=, 0);
+ spin_unlock(&vnode->lock);
+ return PTR_ERR(server);
+}
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 83ff292..28f3751 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -122,7 +122,7 @@
if (offset == 0 && to == PAGE_SIZE)
return 0;
- p = kmap(page);
+ p = kmap_atomic(page, KM_USER0);
i_size = i_size_read(&vnode->vfs_inode);
pos = (loff_t) page->index << PAGE_SHIFT;
@@ -133,7 +133,7 @@
memset(p, 0, offset);
if (to < PAGE_SIZE)
memset(p + to, 0, PAGE_SIZE - to);
- kunmap(page);
+ kunmap_atomic(p, KM_USER0);
return 0;
}
@@ -152,7 +152,7 @@
memset(p + eof, 0, PAGE_SIZE - eof);
}
- kunmap(p);
+ kunmap_atomic(p, KM_USER0);
ret = 0;
if (offset > 0 || eof > to) {
@@ -395,8 +395,9 @@
if (n == 0)
goto no_more;
if (pages[0]->index != start) {
- for (n--; n >= 0; n--)
- put_page(pages[n]);
+ do {
+ put_page(pages[--n]);
+ } while (n > 0);
goto no_more;
}
@@ -489,14 +490,6 @@
_enter("{%lx},", page->index);
- if (wbc->sync_mode != WB_SYNC_NONE)
- wait_on_page_writeback(page);
-
- if (PageWriteback(page) || !PageDirty(page)) {
- unlock_page(page);
- return 0;
- }
-
wb = (struct afs_writeback *) page_private(page);
ASSERT(wb != NULL);
@@ -677,7 +670,7 @@
pagevec_init(&pv, 0);
do {
- _debug("attach %lx-%lx", first, last);
+ _debug("done %lx-%lx", first, last);
count = last - first + 1;
if (count > PAGEVEC_SIZE)
@@ -709,7 +702,7 @@
}
__pagevec_release(&pv);
- } while (first < last);
+ } while (first <= last);
_leave("");
}
diff --git a/fs/aio.c b/fs/aio.c
index ac1c158..dbe699e 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -30,6 +30,7 @@
#include <linux/highmem.h>
#include <linux/workqueue.h>
#include <linux/security.h>
+#include <linux/eventfd.h>
#include <asm/kmap_types.h>
#include <asm/uaccess.h>
@@ -417,6 +418,7 @@
req->private = NULL;
req->ki_iovec = NULL;
INIT_LIST_HEAD(&req->ki_run_list);
+ req->ki_eventfd = ERR_PTR(-EINVAL);
/* Check if the completion queue has enough free space to
* accept an event from this io.
@@ -458,6 +460,8 @@
{
assert_spin_locked(&ctx->ctx_lock);
+ if (!IS_ERR(req->ki_eventfd))
+ fput(req->ki_eventfd);
if (req->ki_dtor)
req->ki_dtor(req);
if (req->ki_iovec != &req->ki_inline_vec)
@@ -942,6 +946,14 @@
return 1;
}
+ /*
+ * Check if the user asked us to deliver the result through an
+ * eventfd. The eventfd_signal() function is safe to be called
+ * from IRQ context.
+ */
+ if (!IS_ERR(iocb->ki_eventfd))
+ eventfd_signal(iocb->ki_eventfd, 1);
+
info = &ctx->ring_info;
/* add a completion event to the ring buffer.
@@ -1526,8 +1538,7 @@
ssize_t ret;
/* enforce forwards compatibility on users */
- if (unlikely(iocb->aio_reserved1 || iocb->aio_reserved2 ||
- iocb->aio_reserved3)) {
+ if (unlikely(iocb->aio_reserved1 || iocb->aio_reserved2)) {
pr_debug("EINVAL: io_submit: reserve field set\n");
return -EINVAL;
}
@@ -1551,6 +1562,19 @@
fput(file);
return -EAGAIN;
}
+ if (iocb->aio_flags & IOCB_FLAG_RESFD) {
+ /*
+ * If the IOCB_FLAG_RESFD flag of aio_flags is set, get an
+ * instance of the file* now. The file descriptor must be
+ * an eventfd() fd, and will be signaled for each completed
+ * event using the eventfd_signal() function.
+ */
+ req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
+ if (unlikely(IS_ERR(req->ki_eventfd))) {
+ ret = PTR_ERR(req->ki_eventfd);
+ goto out_put_req;
+ }
+ }
req->ki_filp = file;
ret = put_user(req->ki_key, &user_iocb->aio_key);
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
new file mode 100644
index 0000000..40fe3a3
--- /dev/null
+++ b/fs/anon_inodes.c
@@ -0,0 +1,200 @@
+/*
+ * fs/anon_inodes.c
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ * Thanks to Arnd Bergmann for code review and suggestions.
+ * More changes for Thomas Gleixner suggestions.
+ *
+ */
+
+#include <linux/file.h>
+#include <linux/poll.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/magic.h>
+#include <linux/anon_inodes.h>
+
+#include <asm/uaccess.h>
+
+static struct vfsmount *anon_inode_mnt __read_mostly;
+static struct inode *anon_inode_inode;
+static const struct file_operations anon_inode_fops;
+
+static int anon_inodefs_get_sb(struct file_system_type *fs_type, int flags,
+ const char *dev_name, void *data,
+ struct vfsmount *mnt)
+{
+ return get_sb_pseudo(fs_type, "anon_inode:", NULL, ANON_INODE_FS_MAGIC,
+ mnt);
+}
+
+static int anon_inodefs_delete_dentry(struct dentry *dentry)
+{
+ /*
+ * We faked vfs to believe the dentry was hashed when we created it.
+ * Now we restore the flag so that dput() will work correctly.
+ */
+ dentry->d_flags |= DCACHE_UNHASHED;
+ return 1;
+}
+
+static struct file_system_type anon_inode_fs_type = {
+ .name = "anon_inodefs",
+ .get_sb = anon_inodefs_get_sb,
+ .kill_sb = kill_anon_super,
+};
+static struct dentry_operations anon_inodefs_dentry_operations = {
+ .d_delete = anon_inodefs_delete_dentry,
+};
+
+/**
+ * anon_inode_getfd - creates a new file instance by hooking it up to and
+ * anonymous inode, and a dentry that describe the "class"
+ * of the file
+ *
+ * @pfd: [out] pointer to the file descriptor
+ * @dpinode: [out] pointer to the inode
+ * @pfile: [out] pointer to the file struct
+ * @name: [in] name of the "class" of the new file
+ * @fops [in] file operations for the new file
+ * @priv [in] private data for the new file (will be file's private_data)
+ *
+ * Creates a new file by hooking it on a single inode. This is useful for files
+ * that do not need to have a full-fledged inode in order to operate correctly.
+ * All the files created with anon_inode_getfd() will share a single inode, by
+ * hence saving memory and avoiding code duplication for the file/inode/dentry
+ * setup.
+ */
+int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
+ const char *name, const struct file_operations *fops,
+ void *priv)
+{
+ struct qstr this;
+ struct dentry *dentry;
+ struct inode *inode;
+ struct file *file;
+ int error, fd;
+
+ if (IS_ERR(anon_inode_inode))
+ return -ENODEV;
+ file = get_empty_filp();
+ if (!file)
+ return -ENFILE;
+
+ inode = igrab(anon_inode_inode);
+ if (IS_ERR(inode)) {
+ error = PTR_ERR(inode);
+ goto err_put_filp;
+ }
+
+ error = get_unused_fd();
+ if (error < 0)
+ goto err_iput;
+ fd = error;
+
+ /*
+ * Link the inode to a directory entry by creating a unique name
+ * using the inode sequence number.
+ */
+ error = -ENOMEM;
+ this.name = name;
+ this.len = strlen(name);
+ this.hash = 0;
+ dentry = d_alloc(anon_inode_mnt->mnt_sb->s_root, &this);
+ if (!dentry)
+ goto err_put_unused_fd;
+ dentry->d_op = &anon_inodefs_dentry_operations;
+ /* Do not publish this dentry inside the global dentry hash table */
+ dentry->d_flags &= ~DCACHE_UNHASHED;
+ d_instantiate(dentry, inode);
+
+ file->f_path.mnt = mntget(anon_inode_mnt);
+ file->f_path.dentry = dentry;
+ file->f_mapping = inode->i_mapping;
+
+ file->f_pos = 0;
+ file->f_flags = O_RDWR;
+ file->f_op = fops;
+ file->f_mode = FMODE_READ | FMODE_WRITE;
+ file->f_version = 0;
+ file->private_data = priv;
+
+ fd_install(fd, file);
+
+ *pfd = fd;
+ *pinode = inode;
+ *pfile = file;
+ return 0;
+
+err_put_unused_fd:
+ put_unused_fd(fd);
+err_iput:
+ iput(inode);
+err_put_filp:
+ put_filp(file);
+ return error;
+}
+
+/*
+ * A single inode exist for all anon_inode files. Contrary to pipes,
+ * anon_inode inodes has no per-instance data associated, so we can avoid
+ * the allocation of multiple of them.
+ */
+static struct inode *anon_inode_mkinode(void)
+{
+ struct inode *inode = new_inode(anon_inode_mnt->mnt_sb);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
+ inode->i_fop = &anon_inode_fops;
+
+ /*
+ * Mark the inode dirty from the very beginning,
+ * that way it will never be moved to the dirty
+ * list because mark_inode_dirty() will think
+ * that it already _is_ on the dirty list.
+ */
+ inode->i_state = I_DIRTY;
+ inode->i_mode = S_IRUSR | S_IWUSR;
+ inode->i_uid = current->fsuid;
+ inode->i_gid = current->fsgid;
+ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ return inode;
+}
+
+static int __init anon_inode_init(void)
+{
+ int error;
+
+ error = register_filesystem(&anon_inode_fs_type);
+ if (error)
+ goto err_exit;
+ anon_inode_mnt = kern_mount(&anon_inode_fs_type);
+ if (IS_ERR(anon_inode_mnt)) {
+ error = PTR_ERR(anon_inode_mnt);
+ goto err_unregister_filesystem;
+ }
+ anon_inode_inode = anon_inode_mkinode();
+ if (IS_ERR(anon_inode_inode)) {
+ error = PTR_ERR(anon_inode_inode);
+ goto err_mntput;
+ }
+
+ return 0;
+
+err_mntput:
+ mntput(anon_inode_mnt);
+err_unregister_filesystem:
+ unregister_filesystem(&anon_inode_fs_type);
+err_exit:
+ panic(KERN_ERR "anon_inode_init() failed (%d)\n", error);
+}
+
+fs_initcall(anon_inode_init);
+
diff --git a/fs/autofs/autofs_i.h b/fs/autofs/autofs_i.h
index 4ef5444..8b4cca3 100644
--- a/fs/autofs/autofs_i.h
+++ b/fs/autofs/autofs_i.h
@@ -101,7 +101,7 @@
struct autofs_sb_info {
u32 magic;
struct file *pipe;
- pid_t oz_pgrp;
+ struct pid *oz_pgrp;
int catatonic;
struct super_block *sb;
unsigned long exp_timeout;
@@ -122,7 +122,7 @@
filesystem without "magic".) */
static inline int autofs_oz_mode(struct autofs_sb_info *sbi) {
- return sbi->catatonic || process_group(current) == sbi->oz_pgrp;
+ return sbi->catatonic || task_pgrp(current) == sbi->oz_pgrp;
}
/* Hash operations */
diff --git a/fs/autofs/inode.c b/fs/autofs/inode.c
index aa0b61f..e7204d7 100644
--- a/fs/autofs/inode.c
+++ b/fs/autofs/inode.c
@@ -34,12 +34,14 @@
if (!sbi)
goto out_kill_sb;
- if ( !sbi->catatonic )
+ if (!sbi->catatonic)
autofs_catatonic_mode(sbi); /* Free wait queues, close pipe */
+ put_pid(sbi->oz_pgrp);
+
autofs_hash_nuke(sbi);
- for ( n = 0 ; n < AUTOFS_MAX_SYMLINKS ; n++ ) {
- if ( test_bit(n, sbi->symlink_bitmap) )
+ for (n = 0; n < AUTOFS_MAX_SYMLINKS; n++) {
+ if (test_bit(n, sbi->symlink_bitmap))
kfree(sbi->symlink[n].data);
}
@@ -69,7 +71,8 @@
{Opt_err, NULL}
};
-static int parse_options(char *options, int *pipefd, uid_t *uid, gid_t *gid, pid_t *pgrp, int *minproto, int *maxproto)
+static int parse_options(char *options, int *pipefd, uid_t *uid, gid_t *gid,
+ pid_t *pgrp, int *minproto, int *maxproto)
{
char *p;
substring_t args[MAX_OPT_ARGS];
@@ -138,9 +141,10 @@
int pipefd;
struct autofs_sb_info *sbi;
int minproto, maxproto;
+ pid_t pgid;
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
- if ( !sbi )
+ if (!sbi)
goto fail_unlock;
DPRINTK(("autofs: starting up, sbi = %p\n",sbi));
@@ -149,7 +153,6 @@
sbi->pipe = NULL;
sbi->catatonic = 1;
sbi->exp_timeout = 0;
- sbi->oz_pgrp = process_group(current);
autofs_initialize_hash(&sbi->dirhash);
sbi->queues = NULL;
memset(sbi->symlink_bitmap, 0, sizeof(long)*AUTOFS_SYMLINK_BITMAP_LEN);
@@ -169,26 +172,36 @@
goto fail_iput;
/* Can this call block? - WTF cares? s is locked. */
- if ( parse_options(data,&pipefd,&root_inode->i_uid,&root_inode->i_gid,&sbi->oz_pgrp,&minproto,&maxproto) ) {
+ if (parse_options(data, &pipefd, &root_inode->i_uid,
+ &root_inode->i_gid, &pgid, &minproto,
+ &maxproto)) {
printk("autofs: called with bogus options\n");
goto fail_dput;
}
/* Couldn't this be tested earlier? */
- if ( minproto > AUTOFS_PROTO_VERSION ||
- maxproto < AUTOFS_PROTO_VERSION ) {
+ if (minproto > AUTOFS_PROTO_VERSION ||
+ maxproto < AUTOFS_PROTO_VERSION) {
printk("autofs: kernel does not match daemon version\n");
goto fail_dput;
}
- DPRINTK(("autofs: pipe fd = %d, pgrp = %u\n", pipefd, sbi->oz_pgrp));
- pipe = fget(pipefd);
-
- if ( !pipe ) {
- printk("autofs: could not open pipe file descriptor\n");
+ DPRINTK(("autofs: pipe fd = %d, pgrp = %u\n", pipefd, pgid));
+ sbi->oz_pgrp = find_get_pid(pgid);
+
+ if (!sbi->oz_pgrp) {
+ printk("autofs: could not find process group %d\n", pgid);
goto fail_dput;
}
- if ( !pipe->f_op || !pipe->f_op->write )
+
+ pipe = fget(pipefd);
+
+ if (!pipe) {
+ printk("autofs: could not open pipe file descriptor\n");
+ goto fail_put_pid;
+ }
+
+ if (!pipe->f_op || !pipe->f_op->write)
goto fail_fput;
sbi->pipe = pipe;
sbi->catatonic = 0;
@@ -202,6 +215,8 @@
fail_fput:
printk("autofs: pipe file descriptor does not contain proper ops\n");
fput(pipe);
+fail_put_pid:
+ put_pid(sbi->oz_pgrp);
fail_dput:
dput(root);
goto fail_free;
@@ -230,7 +245,7 @@
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
inode->i_blocks = 0;
- if ( ino == AUTOFS_ROOT_INO ) {
+ if (ino == AUTOFS_ROOT_INO) {
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
inode->i_op = &autofs_root_inode_operations;
inode->i_fop = &autofs_root_operations;
@@ -241,12 +256,12 @@
inode->i_uid = inode->i_sb->s_root->d_inode->i_uid;
inode->i_gid = inode->i_sb->s_root->d_inode->i_gid;
- if ( ino >= AUTOFS_FIRST_SYMLINK && ino < AUTOFS_FIRST_DIR_INO ) {
+ if (ino >= AUTOFS_FIRST_SYMLINK && ino < AUTOFS_FIRST_DIR_INO) {
/* Symlink inode - should be in symlink list */
struct autofs_symlink *sl;
n = ino - AUTOFS_FIRST_SYMLINK;
- if ( n >= AUTOFS_MAX_SYMLINKS || !test_bit(n,sbi->symlink_bitmap)) {
+ if (n >= AUTOFS_MAX_SYMLINKS || !test_bit(n,sbi->symlink_bitmap)) {
printk("autofs: Looking for bad symlink inode %u\n", (unsigned int) ino);
return;
}
diff --git a/fs/autofs/root.c b/fs/autofs/root.c
index f259720..c148953 100644
--- a/fs/autofs/root.c
+++ b/fs/autofs/root.c
@@ -67,8 +67,8 @@
filp->f_pos = ++nr;
/* fall through */
default:
- while ( onr = nr, ent = autofs_hash_enum(dirhash,&nr,ent) ) {
- if ( !ent->dentry || d_mountpoint(ent->dentry) ) {
+ while (onr = nr, ent = autofs_hash_enum(dirhash,&nr,ent)) {
+ if (!ent->dentry || d_mountpoint(ent->dentry)) {
if (filldir(dirent,ent->name,ent->len,onr,ent->ino,DT_UNKNOWN) < 0)
goto out;
filp->f_pos = nr;
@@ -88,10 +88,10 @@
struct autofs_dir_ent *ent;
int status = 0;
- if ( !(ent = autofs_hash_lookup(&sbi->dirhash, &dentry->d_name)) ) {
+ if (!(ent = autofs_hash_lookup(&sbi->dirhash, &dentry->d_name))) {
do {
- if ( status && dentry->d_inode ) {
- if ( status != -ENOENT )
+ if (status && dentry->d_inode) {
+ if (status != -ENOENT)
printk("autofs warning: lookup failure on positive dentry, status = %d, name = %s\n", status, dentry->d_name.name);
return 0; /* Try to get the kernel to invalidate this dentry */
}
@@ -106,7 +106,7 @@
return 1;
}
status = autofs_wait(sbi, &dentry->d_name);
- } while (!(ent = autofs_hash_lookup(&sbi->dirhash, &dentry->d_name)) );
+ } while (!(ent = autofs_hash_lookup(&sbi->dirhash, &dentry->d_name)));
}
/* Abuse this field as a pointer to the directory entry, used to
@@ -124,13 +124,13 @@
/* If this is a directory that isn't a mount point, bitch at the
daemon and fix it in user space */
- if ( S_ISDIR(dentry->d_inode->i_mode) && !d_mountpoint(dentry) ) {
+ if (S_ISDIR(dentry->d_inode->i_mode) && !d_mountpoint(dentry)) {
return !autofs_wait(sbi, &dentry->d_name);
}
/* We don't update the usages for the autofs daemon itself, this
is necessary for recursive autofs mounts */
- if ( !autofs_oz_mode(sbi) ) {
+ if (!autofs_oz_mode(sbi)) {
autofs_update_usage(&sbi->dirhash,ent);
}
@@ -157,7 +157,7 @@
sbi = autofs_sbi(dir->i_sb);
/* Pending dentry */
- if ( dentry->d_flags & DCACHE_AUTOFS_PENDING ) {
+ if (dentry->d_flags & DCACHE_AUTOFS_PENDING) {
if (autofs_oz_mode(sbi))
res = 1;
else
@@ -173,7 +173,7 @@
}
/* Check for a non-mountpoint directory */
- if ( S_ISDIR(dentry->d_inode->i_mode) && !d_mountpoint(dentry) ) {
+ if (S_ISDIR(dentry->d_inode->i_mode) && !d_mountpoint(dentry)) {
if (autofs_oz_mode(sbi))
res = 1;
else
@@ -183,9 +183,9 @@
}
/* Update the usage list */
- if ( !autofs_oz_mode(sbi) ) {
+ if (!autofs_oz_mode(sbi)) {
ent = (struct autofs_dir_ent *) dentry->d_time;
- if ( ent )
+ if (ent)
autofs_update_usage(&sbi->dirhash,ent);
}
unlock_kernel();
@@ -213,8 +213,10 @@
sbi = autofs_sbi(dir->i_sb);
oz_mode = autofs_oz_mode(sbi);
- DPRINTK(("autofs_lookup: pid = %u, pgrp = %u, catatonic = %d, oz_mode = %d\n",
- current->pid, process_group(current), sbi->catatonic, oz_mode));
+ DPRINTK(("autofs_lookup: pid = %u, pgrp = %u, catatonic = %d, "
+ "oz_mode = %d\n", pid_nr(task_pid(current)),
+ process_group(current), sbi->catatonic,
+ oz_mode));
/*
* Mark the dentry incomplete, but add it. This is needed so
@@ -258,7 +260,7 @@
* doesn't do the right thing for all system calls, but it should
* be OK for the operations we permit from an autofs.
*/
- if ( dentry->d_inode && d_unhashed(dentry) )
+ if (dentry->d_inode && d_unhashed(dentry))
return ERR_PTR(-ENOENT);
return NULL;
@@ -277,18 +279,18 @@
autofs_say(dentry->d_name.name,dentry->d_name.len);
lock_kernel();
- if ( !autofs_oz_mode(sbi) ) {
+ if (!autofs_oz_mode(sbi)) {
unlock_kernel();
return -EACCES;
}
- if ( autofs_hash_lookup(dh, &dentry->d_name) ) {
+ if (autofs_hash_lookup(dh, &dentry->d_name)) {
unlock_kernel();
return -EEXIST;
}
n = find_first_zero_bit(sbi->symlink_bitmap,AUTOFS_MAX_SYMLINKS);
- if ( n >= AUTOFS_MAX_SYMLINKS ) {
+ if (n >= AUTOFS_MAX_SYMLINKS) {
unlock_kernel();
return -ENOSPC;
}
@@ -297,14 +299,14 @@
sl = &sbi->symlink[n];
sl->len = strlen(symname);
sl->data = kmalloc(slsize = sl->len+1, GFP_KERNEL);
- if ( !sl->data ) {
+ if (!sl->data) {
clear_bit(n,sbi->symlink_bitmap);
unlock_kernel();
return -ENOSPC;
}
ent = kmalloc(sizeof(struct autofs_dir_ent), GFP_KERNEL);
- if ( !ent ) {
+ if (!ent) {
kfree(sl->data);
clear_bit(n,sbi->symlink_bitmap);
unlock_kernel();
@@ -312,7 +314,7 @@
}
ent->name = kmalloc(dentry->d_name.len+1, GFP_KERNEL);
- if ( !ent->name ) {
+ if (!ent->name) {
kfree(sl->data);
kfree(ent);
clear_bit(n,sbi->symlink_bitmap);
@@ -354,23 +356,23 @@
/* This allows root to remove symlinks */
lock_kernel();
- if ( !autofs_oz_mode(sbi) && !capable(CAP_SYS_ADMIN) ) {
+ if (!autofs_oz_mode(sbi) && !capable(CAP_SYS_ADMIN)) {
unlock_kernel();
return -EACCES;
}
ent = autofs_hash_lookup(dh, &dentry->d_name);
- if ( !ent ) {
+ if (!ent) {
unlock_kernel();
return -ENOENT;
}
n = ent->ino - AUTOFS_FIRST_SYMLINK;
- if ( n >= AUTOFS_MAX_SYMLINKS ) {
+ if (n >= AUTOFS_MAX_SYMLINKS) {
unlock_kernel();
return -EISDIR; /* It's a directory, dummy */
}
- if ( !test_bit(n,sbi->symlink_bitmap) ) {
+ if (!test_bit(n,sbi->symlink_bitmap)) {
unlock_kernel();
return -EINVAL; /* Nonexistent symlink? Shouldn't happen */
}
@@ -392,23 +394,23 @@
struct autofs_dir_ent *ent;
lock_kernel();
- if ( !autofs_oz_mode(sbi) ) {
+ if (!autofs_oz_mode(sbi)) {
unlock_kernel();
return -EACCES;
}
ent = autofs_hash_lookup(dh, &dentry->d_name);
- if ( !ent ) {
+ if (!ent) {
unlock_kernel();
return -ENOENT;
}
- if ( (unsigned int)ent->ino < AUTOFS_FIRST_DIR_INO ) {
+ if ((unsigned int)ent->ino < AUTOFS_FIRST_DIR_INO) {
unlock_kernel();
return -ENOTDIR; /* Not a directory */
}
- if ( ent->dentry != dentry ) {
+ if (ent->dentry != dentry) {
printk("autofs_rmdir: odentry != dentry for entry %s\n", dentry->d_name.name);
}
@@ -429,18 +431,18 @@
ino_t ino;
lock_kernel();
- if ( !autofs_oz_mode(sbi) ) {
+ if (!autofs_oz_mode(sbi)) {
unlock_kernel();
return -EACCES;
}
ent = autofs_hash_lookup(dh, &dentry->d_name);
- if ( ent ) {
+ if (ent) {
unlock_kernel();
return -EEXIST;
}
- if ( sbi->next_dir_ino < AUTOFS_FIRST_DIR_INO ) {
+ if (sbi->next_dir_ino < AUTOFS_FIRST_DIR_INO) {
printk("autofs: Out of inode numbers -- what the heck did you do??\n");
unlock_kernel();
return -ENOSPC;
@@ -448,13 +450,13 @@
ino = sbi->next_dir_ino++;
ent = kmalloc(sizeof(struct autofs_dir_ent), GFP_KERNEL);
- if ( !ent ) {
+ if (!ent) {
unlock_kernel();
return -ENOSPC;
}
ent->name = kmalloc(dentry->d_name.len+1, GFP_KERNEL);
- if ( !ent->name ) {
+ if (!ent->name) {
kfree(ent);
unlock_kernel();
return -ENOSPC;
@@ -483,7 +485,7 @@
put_user(sbi->exp_timeout / HZ, p))
return -EFAULT;
- if ( ntimeout > ULONG_MAX/HZ )
+ if (ntimeout > ULONG_MAX/HZ)
sbi->exp_timeout = 0;
else
sbi->exp_timeout = ntimeout * HZ;
@@ -511,15 +513,14 @@
pkt.hdr.proto_version = AUTOFS_PROTO_VERSION;
pkt.hdr.type = autofs_ptype_expire;
- if ( !sbi->exp_timeout ||
- !(ent = autofs_expire(sb,sbi,mnt)) )
+ if (!sbi->exp_timeout || !(ent = autofs_expire(sb,sbi,mnt)))
return -EAGAIN;
pkt.len = ent->len;
memcpy(pkt.name, ent->name, pkt.len);
pkt.name[pkt.len] = '\0';
- if ( copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire)) )
+ if (copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire)))
return -EFAULT;
return 0;
@@ -537,11 +538,11 @@
DPRINTK(("autofs_ioctl: cmd = 0x%08x, arg = 0x%08lx, sbi = %p, pgrp = %u\n",cmd,arg,sbi,process_group(current)));
- if ( _IOC_TYPE(cmd) != _IOC_TYPE(AUTOFS_IOC_FIRST) ||
- _IOC_NR(cmd) - _IOC_NR(AUTOFS_IOC_FIRST) >= AUTOFS_IOC_COUNT )
+ if (_IOC_TYPE(cmd) != _IOC_TYPE(AUTOFS_IOC_FIRST) ||
+ _IOC_NR(cmd) - _IOC_NR(AUTOFS_IOC_FIRST) >= AUTOFS_IOC_COUNT)
return -ENOTTY;
- if ( !autofs_oz_mode(sbi) && !capable(CAP_SYS_ADMIN) )
+ if (!autofs_oz_mode(sbi) && !capable(CAP_SYS_ADMIN))
return -EPERM;
switch(cmd) {
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 5769a2f..692364e8 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -218,8 +218,7 @@
};
static int parse_options(char *options, int *pipefd, uid_t *uid, gid_t *gid,
- pid_t *pgrp, unsigned int *type,
- int *minproto, int *maxproto)
+ pid_t *pgrp, unsigned int *type, int *minproto, int *maxproto)
{
char *p;
substring_t args[MAX_OPT_ARGS];
@@ -314,7 +313,7 @@
struct autofs_info *ino;
sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
- if ( !sbi )
+ if (!sbi)
goto fail_unlock;
DPRINTK("starting up, sbi = %p",sbi);
@@ -363,10 +362,9 @@
root->d_fsdata = ino;
/* Can this call block? */
- if (parse_options(data, &pipefd,
- &root_inode->i_uid, &root_inode->i_gid,
- &sbi->oz_pgrp, &sbi->type,
- &sbi->min_proto, &sbi->max_proto)) {
+ if (parse_options(data, &pipefd, &root_inode->i_uid, &root_inode->i_gid,
+ &sbi->oz_pgrp, &sbi->type, &sbi->min_proto,
+ &sbi->max_proto)) {
printk("autofs: called with bogus options\n");
goto fail_dput;
}
@@ -396,11 +394,11 @@
DPRINTK("pipe fd = %d, pgrp = %u", pipefd, sbi->oz_pgrp);
pipe = fget(pipefd);
- if ( !pipe ) {
+ if (!pipe) {
printk("autofs: could not open pipe file descriptor\n");
goto fail_dput;
}
- if ( !pipe->f_op || !pipe->f_op->write )
+ if (!pipe->f_op || !pipe->f_op->write)
goto fail_fput;
sbi->pipe = pipe;
sbi->pipefd = pipefd;
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 15170f4..2d4c8a3 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -759,7 +759,7 @@
struct autofs_info *p_ino;
/* This allows root to remove symlinks */
- if ( !autofs4_oz_mode(sbi) && !capable(CAP_SYS_ADMIN) )
+ if (!autofs4_oz_mode(sbi) && !capable(CAP_SYS_ADMIN))
return -EACCES;
if (atomic_dec_and_test(&ino->count)) {
@@ -833,7 +833,7 @@
struct autofs_info *p_ino;
struct inode *inode;
- if ( !autofs4_oz_mode(sbi) )
+ if (!autofs4_oz_mode(sbi))
return -EACCES;
DPRINTK("dentry %p, creating %.*s",
@@ -871,11 +871,11 @@
int rv;
unsigned long ntimeout;
- if ( (rv = get_user(ntimeout, p)) ||
- (rv = put_user(sbi->exp_timeout/HZ, p)) )
+ if ((rv = get_user(ntimeout, p)) ||
+ (rv = put_user(sbi->exp_timeout/HZ, p)))
return rv;
- if ( ntimeout > ULONG_MAX/HZ )
+ if (ntimeout > ULONG_MAX/HZ)
sbi->exp_timeout = 0;
else
sbi->exp_timeout = ntimeout * HZ;
@@ -906,7 +906,7 @@
DPRINTK("returning %d", sbi->needs_reghost);
status = put_user(sbi->needs_reghost, p);
- if ( status )
+ if (status)
return status;
sbi->needs_reghost = 0;
@@ -975,11 +975,11 @@
DPRINTK("cmd = 0x%08x, arg = 0x%08lx, sbi = %p, pgrp = %u",
cmd,arg,sbi,process_group(current));
- if ( _IOC_TYPE(cmd) != _IOC_TYPE(AUTOFS_IOC_FIRST) ||
- _IOC_NR(cmd) - _IOC_NR(AUTOFS_IOC_FIRST) >= AUTOFS_IOC_COUNT )
+ if (_IOC_TYPE(cmd) != _IOC_TYPE(AUTOFS_IOC_FIRST) ||
+ _IOC_NR(cmd) - _IOC_NR(AUTOFS_IOC_FIRST) >= AUTOFS_IOC_COUNT)
return -ENOTTY;
- if ( !autofs4_oz_mode(sbi) && !capable(CAP_SYS_ADMIN) )
+ if (!autofs4_oz_mode(sbi) && !capable(CAP_SYS_ADMIN))
return -EPERM;
switch(cmd) {
diff --git a/fs/compat.c b/fs/compat.c
index 9cf75df..7b21b0a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -46,6 +46,7 @@
#include <linux/tsacct_kern.h>
#include <linux/security.h>
#include <linux/highmem.h>
+#include <linux/signal.h>
#include <linux/poll.h>
#include <linux/mm.h>
#include <linux/eventpoll.h>
@@ -2199,3 +2200,51 @@
#endif /* TIF_RESTORE_SIGMASK */
#endif /* CONFIG_EPOLL */
+
+#ifdef CONFIG_SIGNALFD
+
+asmlinkage long compat_sys_signalfd(int ufd,
+ const compat_sigset_t __user *sigmask,
+ compat_size_t sigsetsize)
+{
+ compat_sigset_t ss32;
+ sigset_t tmp;
+ sigset_t __user *ksigmask;
+
+ if (sigsetsize != sizeof(compat_sigset_t))
+ return -EINVAL;
+ if (copy_from_user(&ss32, sigmask, sizeof(ss32)))
+ return -EFAULT;
+ sigset_from_compat(&tmp, &ss32);
+ ksigmask = compat_alloc_user_space(sizeof(sigset_t));
+ if (copy_to_user(ksigmask, &tmp, sizeof(sigset_t)))
+ return -EFAULT;
+
+ return sys_signalfd(ufd, ksigmask, sizeof(sigset_t));
+}
+
+#endif /* CONFIG_SIGNALFD */
+
+#ifdef CONFIG_TIMERFD
+
+asmlinkage long compat_sys_timerfd(int ufd, int clockid, int flags,
+ const struct compat_itimerspec __user *utmr)
+{
+ long res;
+ struct itimerspec t;
+ struct itimerspec __user *ut;
+
+ res = -EFAULT;
+ if (get_compat_itimerspec(&t, utmr))
+ goto err_exit;
+ ut = compat_alloc_user_space(sizeof(*ut));
+ if (copy_to_user(ut, &t, sizeof(t)) )
+ goto err_exit;
+
+ res = sys_timerfd(ufd, clockid, flags, ut);
+err_exit:
+ return res;
+}
+
+#endif /* CONFIG_TIMERFD */
+
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index d92bc3e..65643de 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -3566,10 +3566,13 @@
goto found_handler;
}
+#ifdef CONFIG_NET
if (S_ISSOCK(filp->f_path.dentry->d_inode->i_mode) &&
cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
error = siocdevprivate_ioctl(fd, cmd, arg);
- } else {
+ } else
+#endif
+ {
static int count;
if (++count <= 50)
diff --git a/fs/eventfd.c b/fs/eventfd.c
new file mode 100644
index 0000000..480e2b3
--- /dev/null
+++ b/fs/eventfd.c
@@ -0,0 +1,228 @@
+/*
+ * fs/eventfd.c
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#include <linux/file.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/anon_inodes.h>
+#include <linux/eventfd.h>
+
+struct eventfd_ctx {
+ spinlock_t lock;
+ wait_queue_head_t wqh;
+ /*
+ * Every time that a write(2) is performed on an eventfd, the
+ * value of the __u64 being written is added to "count" and a
+ * wakeup is performed on "wqh". A read(2) will return the "count"
+ * value to userspace, and will reset "count" to zero. The kernel
+ * size eventfd_signal() also, adds to the "count" counter and
+ * issue a wakeup.
+ */
+ __u64 count;
+};
+
+/*
+ * Adds "n" to the eventfd counter "count". Returns "n" in case of
+ * success, or a value lower then "n" in case of coutner overflow.
+ * This function is supposed to be called by the kernel in paths
+ * that do not allow sleeping. In this function we allow the counter
+ * to reach the ULLONG_MAX value, and we signal this as overflow
+ * condition by returining a POLLERR to poll(2).
+ */
+int eventfd_signal(struct file *file, int n)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ unsigned long flags;
+
+ if (n < 0)
+ return -EINVAL;
+ spin_lock_irqsave(&ctx->lock, flags);
+ if (ULLONG_MAX - ctx->count < n)
+ n = (int) (ULLONG_MAX - ctx->count);
+ ctx->count += n;
+ if (waitqueue_active(&ctx->wqh))
+ wake_up_locked(&ctx->wqh);
+ spin_unlock_irqrestore(&ctx->lock, flags);
+
+ return n;
+}
+
+static int eventfd_release(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+ return 0;
+}
+
+static unsigned int eventfd_poll(struct file *file, poll_table *wait)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ unsigned int events = 0;
+ unsigned long flags;
+
+ poll_wait(file, &ctx->wqh, wait);
+
+ spin_lock_irqsave(&ctx->lock, flags);
+ if (ctx->count > 0)
+ events |= POLLIN;
+ if (ctx->count == ULLONG_MAX)
+ events |= POLLERR;
+ if (ULLONG_MAX - 1 > ctx->count)
+ events |= POLLOUT;
+ spin_unlock_irqrestore(&ctx->lock, flags);
+
+ return events;
+}
+
+static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ __u64 ucnt;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count < sizeof(ucnt))
+ return -EINVAL;
+ spin_lock_irq(&ctx->lock);
+ res = -EAGAIN;
+ ucnt = ctx->count;
+ if (ucnt > 0)
+ res = sizeof(ucnt);
+ else if (!(file->f_flags & O_NONBLOCK)) {
+ __add_wait_queue(&ctx->wqh, &wait);
+ for (res = 0;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ctx->count > 0) {
+ ucnt = ctx->count;
+ res = sizeof(ucnt);
+ break;
+ }
+ if (signal_pending(current)) {
+ res = -ERESTARTSYS;
+ break;
+ }
+ spin_unlock_irq(&ctx->lock);
+ schedule();
+ spin_lock_irq(&ctx->lock);
+ }
+ __remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+ }
+ if (res > 0) {
+ ctx->count = 0;
+ if (waitqueue_active(&ctx->wqh))
+ wake_up_locked(&ctx->wqh);
+ }
+ spin_unlock_irq(&ctx->lock);
+ if (res > 0 && put_user(ucnt, (__u64 __user *) buf))
+ return -EFAULT;
+
+ return res;
+}
+
+static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct eventfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ __u64 ucnt;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count < sizeof(ucnt))
+ return -EINVAL;
+ if (copy_from_user(&ucnt, buf, sizeof(ucnt)))
+ return -EFAULT;
+ if (ucnt == ULLONG_MAX)
+ return -EINVAL;
+ spin_lock_irq(&ctx->lock);
+ res = -EAGAIN;
+ if (ULLONG_MAX - ctx->count > ucnt)
+ res = sizeof(ucnt);
+ else if (!(file->f_flags & O_NONBLOCK)) {
+ __add_wait_queue(&ctx->wqh, &wait);
+ for (res = 0;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ULLONG_MAX - ctx->count > ucnt) {
+ res = sizeof(ucnt);
+ break;
+ }
+ if (signal_pending(current)) {
+ res = -ERESTARTSYS;
+ break;
+ }
+ spin_unlock_irq(&ctx->lock);
+ schedule();
+ spin_lock_irq(&ctx->lock);
+ }
+ __remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+ }
+ if (res > 0) {
+ ctx->count += ucnt;
+ if (waitqueue_active(&ctx->wqh))
+ wake_up_locked(&ctx->wqh);
+ }
+ spin_unlock_irq(&ctx->lock);
+
+ return res;
+}
+
+static const struct file_operations eventfd_fops = {
+ .release = eventfd_release,
+ .poll = eventfd_poll,
+ .read = eventfd_read,
+ .write = eventfd_write,
+};
+
+struct file *eventfd_fget(int fd)
+{
+ struct file *file;
+
+ file = fget(fd);
+ if (!file)
+ return ERR_PTR(-EBADF);
+ if (file->f_op != &eventfd_fops) {
+ fput(file);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return file;
+}
+
+asmlinkage long sys_eventfd(unsigned int count)
+{
+ int error, fd;
+ struct eventfd_ctx *ctx;
+ struct file *file;
+ struct inode *inode;
+
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ init_waitqueue_head(&ctx->wqh);
+ spin_lock_init(&ctx->lock);
+ ctx->count = count;
+
+ /*
+ * When we call this, the initialization must be complete, since
+ * anon_inode_getfd() will install the fd.
+ */
+ error = anon_inode_getfd(&fd, &inode, &file, "[eventfd]",
+ &eventfd_fops, ctx);
+ if (!error)
+ return fd;
+
+ kfree(ctx);
+ return error;
+}
+
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index b5c7ca5..0b73cd4 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1,6 +1,6 @@
/*
- * fs/eventpoll.c ( Efficent event polling implementation )
- * Copyright (C) 2001,...,2006 Davide Libenzi
+ * fs/eventpoll.c (Efficent event polling implementation)
+ * Copyright (C) 2001,...,2007 Davide Libenzi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,7 +11,6 @@
*
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -27,28 +26,26 @@
#include <linux/hash.h>
#include <linux/spinlock.h>
#include <linux/syscalls.h>
-#include <linux/rwsem.h>
#include <linux/rbtree.h>
#include <linux/wait.h>
#include <linux/eventpoll.h>
#include <linux/mount.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/anon_inodes.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/mman.h>
#include <asm/atomic.h>
-#include <asm/semaphore.h>
-
/*
* LOCKING:
* There are three level of locking required by epoll :
*
* 1) epmutex (mutex)
- * 2) ep->sem (rw_semaphore)
- * 3) ep->lock (rw_lock)
+ * 2) ep->mtx (mutex)
+ * 3) ep->lock (spinlock)
*
* The acquire order is the one listed above, from 1 to 3.
* We need a spinlock (ep->lock) because we manipulate objects
@@ -58,25 +55,22 @@
* a spinlock. During the event transfer loop (from kernel to
* user space) we could end up sleeping due a copy_to_user(), so
* we need a lock that will allow us to sleep. This lock is a
- * read-write semaphore (ep->sem). It is acquired on read during
- * the event transfer loop and in write during epoll_ctl(EPOLL_CTL_DEL)
- * and during eventpoll_release_file(). Then we also need a global
- * semaphore to serialize eventpoll_release_file() and ep_free().
- * This semaphore is acquired by ep_free() during the epoll file
+ * mutex (ep->mtx). It is acquired during the event transfer loop,
+ * during epoll_ctl(EPOLL_CTL_DEL) and during eventpoll_release_file().
+ * Then we also need a global mutex to serialize eventpoll_release_file()
+ * and ep_free().
+ * This mutex is acquired by ep_free() during the epoll file
* cleanup path and it is also acquired by eventpoll_release_file()
* if a file has been pushed inside an epoll set and it is then
* close()d without a previous call toepoll_ctl(EPOLL_CTL_DEL).
- * It is possible to drop the "ep->sem" and to use the global
- * semaphore "epmutex" (together with "ep->lock") to have it working,
- * but having "ep->sem" will make the interface more scalable.
+ * It is possible to drop the "ep->mtx" and to use the global
+ * mutex "epmutex" (together with "ep->lock") to have it working,
+ * but having "ep->mtx" will make the interface more scalable.
* Events that require holding "epmutex" are very rare, while for
- * normal operations the epoll private "ep->sem" will guarantee
- * a greater scalability.
+ * normal operations the epoll private "ep->mtx" will guarantee
+ * a better scalability.
*/
-
-#define EVENTPOLLFS_MAGIC 0x03111965 /* My birthday should work for this :) */
-
#define DEBUG_EPOLL 0
#if DEBUG_EPOLL > 0
@@ -106,6 +100,7 @@
#define EP_MAX_EVENTS (INT_MAX / sizeof(struct epoll_event))
+#define EP_UNACTIVE_PTR ((void *) -1L)
struct epoll_filefd {
struct file *file;
@@ -116,7 +111,7 @@
* Node that is linked into the "wake_task_list" member of the "struct poll_safewake".
* It is used to keep track on all tasks that are currently inside the wake_up() code
* to 1) short-circuit the one coming from the same task and same wait queue head
- * ( loop ) 2) allow a maximum number of epoll descriptors inclusion nesting
+ * (loop) 2) allow a maximum number of epoll descriptors inclusion nesting
* 3) let go the ones coming from other tasks.
*/
struct wake_task_node {
@@ -135,21 +130,57 @@
};
/*
+ * Each file descriptor added to the eventpoll interface will
+ * have an entry of this type linked to the "rbr" RB tree.
+ */
+struct epitem {
+ /* RB tree node used to link this structure to the eventpoll RB tree */
+ struct rb_node rbn;
+
+ /* List header used to link this structure to the eventpoll ready list */
+ struct list_head rdllink;
+
+ /*
+ * Works together "struct eventpoll"->ovflist in keeping the
+ * single linked chain of items.
+ */
+ struct epitem *next;
+
+ /* The file descriptor information this item refers to */
+ struct epoll_filefd ffd;
+
+ /* Number of active wait queue attached to poll operations */
+ int nwait;
+
+ /* List containing poll wait queues */
+ struct list_head pwqlist;
+
+ /* The "container" of this item */
+ struct eventpoll *ep;
+
+ /* List header used to link this item to the "struct file" items list */
+ struct list_head fllink;
+
+ /* The structure that describe the interested events and the source fd */
+ struct epoll_event event;
+};
+
+/*
* This structure is stored inside the "private_data" member of the file
* structure and rapresent the main data sructure for the eventpoll
* interface.
*/
struct eventpoll {
/* Protect the this structure access */
- rwlock_t lock;
+ spinlock_t lock;
/*
- * This semaphore is used to ensure that files are not removed
- * while epoll is using them. This is read-held during the event
- * collection loop and it is write-held during the file cleanup
- * path, the epoll file exit code and the ctl operations.
+ * This mutex is used to ensure that files are not removed
+ * while epoll is using them. This is held during the event
+ * collection loop, the file cleanup path, the epoll file exit
+ * code and the ctl operations.
*/
- struct rw_semaphore sem;
+ struct mutex mtx;
/* Wait queue used by sys_epoll_wait() */
wait_queue_head_t wq;
@@ -160,8 +191,15 @@
/* List of ready file descriptors */
struct list_head rdllist;
- /* RB-Tree root used to store monitored fd structs */
+ /* RB tree root used to store monitored fd structs */
struct rb_root rbr;
+
+ /*
+ * This is a single linked list that chains all the "struct epitem" that
+ * happened while transfering ready events to userspace w/out
+ * holding ->lock.
+ */
+ struct epitem *ovflist;
};
/* Wait structure used by the poll hooks */
@@ -182,87 +220,14 @@
wait_queue_head_t *whead;
};
-/*
- * Each file descriptor added to the eventpoll interface will
- * have an entry of this type linked to the "rbr" RB tree.
- */
-struct epitem {
- /* RB-Tree node used to link this structure to the eventpoll rb-tree */
- struct rb_node rbn;
-
- /* List header used to link this structure to the eventpoll ready list */
- struct list_head rdllink;
-
- /* The file descriptor information this item refers to */
- struct epoll_filefd ffd;
-
- /* Number of active wait queue attached to poll operations */
- int nwait;
-
- /* List containing poll wait queues */
- struct list_head pwqlist;
-
- /* The "container" of this item */
- struct eventpoll *ep;
-
- /* The structure that describe the interested events and the source fd */
- struct epoll_event event;
-
- /*
- * Used to keep track of the usage count of the structure. This avoids
- * that the structure will desappear from underneath our processing.
- */
- atomic_t usecnt;
-
- /* List header used to link this item to the "struct file" items list */
- struct list_head fllink;
-};
-
/* Wrapper struct used by poll queueing */
struct ep_pqueue {
poll_table pt;
struct epitem *epi;
};
-
-
-static void ep_poll_safewake_init(struct poll_safewake *psw);
-static void ep_poll_safewake(struct poll_safewake *psw, wait_queue_head_t *wq);
-static int ep_getfd(int *efd, struct inode **einode, struct file **efile,
- struct eventpoll *ep);
-static int ep_alloc(struct eventpoll **pep);
-static void ep_free(struct eventpoll *ep);
-static struct epitem *ep_find(struct eventpoll *ep, struct file *file, int fd);
-static void ep_use_epitem(struct epitem *epi);
-static void ep_release_epitem(struct epitem *epi);
-static void ep_ptable_queue_proc(struct file *file, wait_queue_head_t *whead,
- poll_table *pt);
-static void ep_rbtree_insert(struct eventpoll *ep, struct epitem *epi);
-static int ep_insert(struct eventpoll *ep, struct epoll_event *event,
- struct file *tfile, int fd);
-static int ep_modify(struct eventpoll *ep, struct epitem *epi,
- struct epoll_event *event);
-static void ep_unregister_pollwait(struct eventpoll *ep, struct epitem *epi);
-static int ep_unlink(struct eventpoll *ep, struct epitem *epi);
-static int ep_remove(struct eventpoll *ep, struct epitem *epi);
-static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *key);
-static int ep_eventpoll_close(struct inode *inode, struct file *file);
-static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait);
-static int ep_send_events(struct eventpoll *ep, struct list_head *txlist,
- struct epoll_event __user *events, int maxevents);
-static int ep_events_transfer(struct eventpoll *ep,
- struct epoll_event __user *events,
- int maxevents);
-static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
- int maxevents, long timeout);
-static int eventpollfs_delete_dentry(struct dentry *dentry);
-static struct inode *ep_eventpoll_inode(void);
-static int eventpollfs_get_sb(struct file_system_type *fs_type,
- int flags, const char *dev_name,
- void *data, struct vfsmount *mnt);
-
/*
- * This semaphore is used to serialize ep_free() and eventpoll_release_file().
+ * This mutex is used to serialize ep_free() and eventpoll_release_file().
*/
static struct mutex epmutex;
@@ -275,39 +240,8 @@
/* Slab cache used to allocate "struct eppoll_entry" */
static struct kmem_cache *pwq_cache __read_mostly;
-/* Virtual fs used to allocate inodes for eventpoll files */
-static struct vfsmount *eventpoll_mnt __read_mostly;
-/* File callbacks that implement the eventpoll file behaviour */
-static const struct file_operations eventpoll_fops = {
- .release = ep_eventpoll_close,
- .poll = ep_eventpoll_poll
-};
-
-/*
- * This is used to register the virtual file system from where
- * eventpoll inodes are allocated.
- */
-static struct file_system_type eventpoll_fs_type = {
- .name = "eventpollfs",
- .get_sb = eventpollfs_get_sb,
- .kill_sb = kill_anon_super,
-};
-
-/* Very basic directory entry operations for the eventpoll virtual file system */
-static struct dentry_operations eventpollfs_dentry_operations = {
- .d_delete = eventpollfs_delete_dentry,
-};
-
-
-
-/* Fast test to see if the file is an evenpoll file */
-static inline int is_file_epoll(struct file *f)
-{
- return f->f_op == &eventpoll_fops;
-}
-
-/* Setup the structure that is used as key for the rb-tree */
+/* Setup the structure that is used as key for the RB tree */
static inline void ep_set_ffd(struct epoll_filefd *ffd,
struct file *file, int fd)
{
@@ -315,7 +249,7 @@
ffd->fd = fd;
}
-/* Compare rb-tree keys */
+/* Compare RB tree keys */
static inline int ep_cmp_ffd(struct epoll_filefd *p1,
struct epoll_filefd *p2)
{
@@ -323,20 +257,20 @@
(p1->file < p2->file ? -1 : p1->fd - p2->fd));
}
-/* Special initialization for the rb-tree node to detect linkage */
+/* Special initialization for the RB tree node to detect linkage */
static inline void ep_rb_initnode(struct rb_node *n)
{
rb_set_parent(n, n);
}
-/* Removes a node from the rb-tree and marks it for a fast is-linked check */
+/* Removes a node from the RB tree and marks it for a fast is-linked check */
static inline void ep_rb_erase(struct rb_node *n, struct rb_root *r)
{
rb_erase(n, r);
rb_set_parent(n, n);
}
-/* Fast check to verify that the item is linked to the main rb-tree */
+/* Fast check to verify that the item is linked to the main RB tree */
static inline int ep_rb_linked(struct rb_node *n)
{
return rb_parent(n) != n;
@@ -374,7 +308,6 @@
spin_lock_init(&psw->lock);
}
-
/*
* Perform a safe wake up of the poll wait list. The problem is that
* with the new callback'd wake up system, it is possible that the
@@ -429,6 +362,157 @@
spin_unlock_irqrestore(&psw->lock, flags);
}
+/*
+ * This function unregister poll callbacks from the associated file descriptor.
+ * Since this must be called without holding "ep->lock" the atomic exchange trick
+ * will protect us from multiple unregister.
+ */
+static void ep_unregister_pollwait(struct eventpoll *ep, struct epitem *epi)
+{
+ int nwait;
+ struct list_head *lsthead = &epi->pwqlist;
+ struct eppoll_entry *pwq;
+
+ /* This is called without locks, so we need the atomic exchange */
+ nwait = xchg(&epi->nwait, 0);
+
+ if (nwait) {
+ while (!list_empty(lsthead)) {
+ pwq = list_first_entry(lsthead, struct eppoll_entry, llink);
+
+ list_del_init(&pwq->llink);
+ remove_wait_queue(pwq->whead, &pwq->wait);
+ kmem_cache_free(pwq_cache, pwq);
+ }
+ }
+}
+
+/*
+ * Removes a "struct epitem" from the eventpoll RB tree and deallocates
+ * all the associated resources. Must be called with "mtx" held.
+ */
+static int ep_remove(struct eventpoll *ep, struct epitem *epi)
+{
+ unsigned long flags;
+ struct file *file = epi->ffd.file;
+
+ /*
+ * Removes poll wait queue hooks. We _have_ to do this without holding
+ * the "ep->lock" otherwise a deadlock might occur. This because of the
+ * sequence of the lock acquisition. Here we do "ep->lock" then the wait
+ * queue head lock when unregistering the wait queue. The wakeup callback
+ * will run by holding the wait queue head lock and will call our callback
+ * that will try to get "ep->lock".
+ */
+ ep_unregister_pollwait(ep, epi);
+
+ /* Remove the current item from the list of epoll hooks */
+ spin_lock(&file->f_ep_lock);
+ if (ep_is_linked(&epi->fllink))
+ list_del_init(&epi->fllink);
+ spin_unlock(&file->f_ep_lock);
+
+ if (ep_rb_linked(&epi->rbn))
+ ep_rb_erase(&epi->rbn, &ep->rbr);
+
+ spin_lock_irqsave(&ep->lock, flags);
+ if (ep_is_linked(&epi->rdllink))
+ list_del_init(&epi->rdllink);
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ /* At this point it is safe to free the eventpoll item */
+ kmem_cache_free(epi_cache, epi);
+
+ DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n",
+ current, ep, file));
+
+ return 0;
+}
+
+static void ep_free(struct eventpoll *ep)
+{
+ struct rb_node *rbp;
+ struct epitem *epi;
+
+ /* We need to release all tasks waiting for these file */
+ if (waitqueue_active(&ep->poll_wait))
+ ep_poll_safewake(&psw, &ep->poll_wait);
+
+ /*
+ * We need to lock this because we could be hit by
+ * eventpoll_release_file() while we're freeing the "struct eventpoll".
+ * We do not need to hold "ep->mtx" here because the epoll file
+ * is on the way to be removed and no one has references to it
+ * anymore. The only hit might come from eventpoll_release_file() but
+ * holding "epmutex" is sufficent here.
+ */
+ mutex_lock(&epmutex);
+
+ /*
+ * Walks through the whole tree by unregistering poll callbacks.
+ */
+ for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
+ epi = rb_entry(rbp, struct epitem, rbn);
+
+ ep_unregister_pollwait(ep, epi);
+ }
+
+ /*
+ * Walks through the whole tree by freeing each "struct epitem". At this
+ * point we are sure no poll callbacks will be lingering around, and also by
+ * holding "epmutex" we can be sure that no file cleanup code will hit
+ * us during this operation. So we can avoid the lock on "ep->lock".
+ */
+ while ((rbp = rb_first(&ep->rbr)) != 0) {
+ epi = rb_entry(rbp, struct epitem, rbn);
+ ep_remove(ep, epi);
+ }
+
+ mutex_unlock(&epmutex);
+ mutex_destroy(&ep->mtx);
+ kfree(ep);
+}
+
+static int ep_eventpoll_release(struct inode *inode, struct file *file)
+{
+ struct eventpoll *ep = file->private_data;
+
+ if (ep)
+ ep_free(ep);
+
+ DNPRINTK(3, (KERN_INFO "[%p] eventpoll: close() ep=%p\n", current, ep));
+ return 0;
+}
+
+static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait)
+{
+ unsigned int pollflags = 0;
+ unsigned long flags;
+ struct eventpoll *ep = file->private_data;
+
+ /* Insert inside our poll wait queue */
+ poll_wait(file, &ep->poll_wait, wait);
+
+ /* Check our condition */
+ spin_lock_irqsave(&ep->lock, flags);
+ if (!list_empty(&ep->rdllist))
+ pollflags = POLLIN | POLLRDNORM;
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ return pollflags;
+}
+
+/* File callbacks that implement the eventpoll file behaviour */
+static const struct file_operations eventpoll_fops = {
+ .release = ep_eventpoll_release,
+ .poll = ep_eventpoll_poll
+};
+
+/* Fast test to see if the file is an evenpoll file */
+static inline int is_file_epoll(struct file *f)
+{
+ return f->f_op == &eventpoll_fops;
+}
/*
* This is called from eventpoll_release() to unlink files from the eventpoll
@@ -445,9 +529,11 @@
* We don't want to get "file->f_ep_lock" because it is not
* necessary. It is not necessary because we're in the "struct file"
* cleanup path, and this means that noone is using this file anymore.
- * The only hit might come from ep_free() but by holding the semaphore
+ * So, for example, epoll_ctl() cannot hit here sicne if we reach this
+ * point, the file counter already went to zero and fget() would fail.
+ * The only hit might come from ep_free() but by holding the mutex
* will correctly serialize the operation. We do need to acquire
- * "ep->sem" after "epmutex" because ep_remove() requires it when called
+ * "ep->mtx" after "epmutex" because ep_remove() requires it when called
* from anywhere but ep_free().
*/
mutex_lock(&epmutex);
@@ -457,21 +543,533 @@
ep = epi->ep;
list_del_init(&epi->fllink);
- down_write(&ep->sem);
+ mutex_lock(&ep->mtx);
ep_remove(ep, epi);
- up_write(&ep->sem);
+ mutex_unlock(&ep->mtx);
}
mutex_unlock(&epmutex);
}
+static int ep_alloc(struct eventpoll **pep)
+{
+ struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+
+ if (!ep)
+ return -ENOMEM;
+
+ spin_lock_init(&ep->lock);
+ mutex_init(&ep->mtx);
+ init_waitqueue_head(&ep->wq);
+ init_waitqueue_head(&ep->poll_wait);
+ INIT_LIST_HEAD(&ep->rdllist);
+ ep->rbr = RB_ROOT;
+ ep->ovflist = EP_UNACTIVE_PTR;
+
+ *pep = ep;
+
+ DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
+ current, ep));
+ return 0;
+}
/*
- * It opens an eventpoll file descriptor by suggesting a storage of "size"
- * file descriptors. The size parameter is just an hint about how to size
- * data structures. It won't prevent the user to store more than "size"
- * file descriptors inside the epoll interface. It is the kernel part of
- * the userspace epoll_create(2).
+ * Search the file inside the eventpoll tree. The RB tree operations
+ * are protected by the "mtx" mutex, and ep_find() must be called with
+ * "mtx" held.
+ */
+static struct epitem *ep_find(struct eventpoll *ep, struct file *file, int fd)
+{
+ int kcmp;
+ struct rb_node *rbp;
+ struct epitem *epi, *epir = NULL;
+ struct epoll_filefd ffd;
+
+ ep_set_ffd(&ffd, file, fd);
+ for (rbp = ep->rbr.rb_node; rbp; ) {
+ epi = rb_entry(rbp, struct epitem, rbn);
+ kcmp = ep_cmp_ffd(&ffd, &epi->ffd);
+ if (kcmp > 0)
+ rbp = rbp->rb_right;
+ else if (kcmp < 0)
+ rbp = rbp->rb_left;
+ else {
+ epir = epi;
+ break;
+ }
+ }
+
+ DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_find(%p) -> %p\n",
+ current, file, epir));
+
+ return epir;
+}
+
+/*
+ * This is the callback that is passed to the wait queue wakeup
+ * machanism. It is called by the stored file descriptors when they
+ * have events to report.
+ */
+static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+ int pwake = 0;
+ unsigned long flags;
+ struct epitem *epi = ep_item_from_wait(wait);
+ struct eventpoll *ep = epi->ep;
+
+ DNPRINTK(3, (KERN_INFO "[%p] eventpoll: poll_callback(%p) epi=%p ep=%p\n",
+ current, epi->ffd.file, epi, ep));
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ /*
+ * If the event mask does not contain any poll(2) event, we consider the
+ * descriptor to be disabled. This condition is likely the effect of the
+ * EPOLLONESHOT bit that disables the descriptor when an event is received,
+ * until the next EPOLL_CTL_MOD will be issued.
+ */
+ if (!(epi->event.events & ~EP_PRIVATE_BITS))
+ goto out_unlock;
+
+ /*
+ * If we are trasfering events to userspace, we can hold no locks
+ * (because we're accessing user memory, and because of linux f_op->poll()
+ * semantics). All the events that happens during that period of time are
+ * chained in ep->ovflist and requeued later on.
+ */
+ if (unlikely(ep->ovflist != EP_UNACTIVE_PTR)) {
+ if (epi->next == EP_UNACTIVE_PTR) {
+ epi->next = ep->ovflist;
+ ep->ovflist = epi;
+ }
+ goto out_unlock;
+ }
+
+ /* If this file is already in the ready list we exit soon */
+ if (ep_is_linked(&epi->rdllink))
+ goto is_linked;
+
+ list_add_tail(&epi->rdllink, &ep->rdllist);
+
+is_linked:
+ /*
+ * Wake up ( if active ) both the eventpoll wait list and the ->poll()
+ * wait list.
+ */
+ if (waitqueue_active(&ep->wq))
+ __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE |
+ TASK_INTERRUPTIBLE);
+ if (waitqueue_active(&ep->poll_wait))
+ pwake++;
+
+out_unlock:
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ /* We have to call this outside the lock */
+ if (pwake)
+ ep_poll_safewake(&psw, &ep->poll_wait);
+
+ return 1;
+}
+
+/*
+ * This is the callback that is used to add our wait queue to the
+ * target file wakeup lists.
+ */
+static void ep_ptable_queue_proc(struct file *file, wait_queue_head_t *whead,
+ poll_table *pt)
+{
+ struct epitem *epi = ep_item_from_epqueue(pt);
+ struct eppoll_entry *pwq;
+
+ if (epi->nwait >= 0 && (pwq = kmem_cache_alloc(pwq_cache, GFP_KERNEL))) {
+ init_waitqueue_func_entry(&pwq->wait, ep_poll_callback);
+ pwq->whead = whead;
+ pwq->base = epi;
+ add_wait_queue(whead, &pwq->wait);
+ list_add_tail(&pwq->llink, &epi->pwqlist);
+ epi->nwait++;
+ } else {
+ /* We have to signal that an error occurred */
+ epi->nwait = -1;
+ }
+}
+
+static void ep_rbtree_insert(struct eventpoll *ep, struct epitem *epi)
+{
+ int kcmp;
+ struct rb_node **p = &ep->rbr.rb_node, *parent = NULL;
+ struct epitem *epic;
+
+ while (*p) {
+ parent = *p;
+ epic = rb_entry(parent, struct epitem, rbn);
+ kcmp = ep_cmp_ffd(&epi->ffd, &epic->ffd);
+ if (kcmp > 0)
+ p = &parent->rb_right;
+ else
+ p = &parent->rb_left;
+ }
+ rb_link_node(&epi->rbn, parent, p);
+ rb_insert_color(&epi->rbn, &ep->rbr);
+}
+
+/*
+ * Must be called with "mtx" held.
+ */
+static int ep_insert(struct eventpoll *ep, struct epoll_event *event,
+ struct file *tfile, int fd)
+{
+ int error, revents, pwake = 0;
+ unsigned long flags;
+ struct epitem *epi;
+ struct ep_pqueue epq;
+
+ error = -ENOMEM;
+ if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
+ goto error_return;
+
+ /* Item initialization follow here ... */
+ ep_rb_initnode(&epi->rbn);
+ INIT_LIST_HEAD(&epi->rdllink);
+ INIT_LIST_HEAD(&epi->fllink);
+ INIT_LIST_HEAD(&epi->pwqlist);
+ epi->ep = ep;
+ ep_set_ffd(&epi->ffd, tfile, fd);
+ epi->event = *event;
+ epi->nwait = 0;
+ epi->next = EP_UNACTIVE_PTR;
+
+ /* Initialize the poll table using the queue callback */
+ epq.epi = epi;
+ init_poll_funcptr(&epq.pt, ep_ptable_queue_proc);
+
+ /*
+ * Attach the item to the poll hooks and get current event bits.
+ * We can safely use the file* here because its usage count has
+ * been increased by the caller of this function. Note that after
+ * this operation completes, the poll callback can start hitting
+ * the new item.
+ */
+ revents = tfile->f_op->poll(tfile, &epq.pt);
+
+ /*
+ * We have to check if something went wrong during the poll wait queue
+ * install process. Namely an allocation for a wait queue failed due
+ * high memory pressure.
+ */
+ if (epi->nwait < 0)
+ goto error_unregister;
+
+ /* Add the current item to the list of active epoll hook for this file */
+ spin_lock(&tfile->f_ep_lock);
+ list_add_tail(&epi->fllink, &tfile->f_ep_links);
+ spin_unlock(&tfile->f_ep_lock);
+
+ /*
+ * Add the current item to the RB tree. All RB tree operations are
+ * protected by "mtx", and ep_insert() is called with "mtx" held.
+ */
+ ep_rbtree_insert(ep, epi);
+
+ /* We have to drop the new item inside our item list to keep track of it */
+ spin_lock_irqsave(&ep->lock, flags);
+
+ /* If the file is already "ready" we drop it inside the ready list */
+ if ((revents & event->events) && !ep_is_linked(&epi->rdllink)) {
+ list_add_tail(&epi->rdllink, &ep->rdllist);
+
+ /* Notify waiting tasks that events are available */
+ if (waitqueue_active(&ep->wq))
+ __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE);
+ if (waitqueue_active(&ep->poll_wait))
+ pwake++;
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ /* We have to call this outside the lock */
+ if (pwake)
+ ep_poll_safewake(&psw, &ep->poll_wait);
+
+ DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_insert(%p, %p, %d)\n",
+ current, ep, tfile, fd));
+
+ return 0;
+
+error_unregister:
+ ep_unregister_pollwait(ep, epi);
+
+ /*
+ * We need to do this because an event could have been arrived on some
+ * allocated wait queue. Note that we don't care about the ep->ovflist
+ * list, since that is used/cleaned only inside a section bound by "mtx".
+ * And ep_insert() is called with "mtx" held.
+ */
+ spin_lock_irqsave(&ep->lock, flags);
+ if (ep_is_linked(&epi->rdllink))
+ list_del_init(&epi->rdllink);
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ kmem_cache_free(epi_cache, epi);
+error_return:
+ return error;
+}
+
+/*
+ * Modify the interest event mask by dropping an event if the new mask
+ * has a match in the current file status. Must be called with "mtx" held.
+ */
+static int ep_modify(struct eventpoll *ep, struct epitem *epi, struct epoll_event *event)
+{
+ int pwake = 0;
+ unsigned int revents;
+ unsigned long flags;
+
+ /*
+ * Set the new event interest mask before calling f_op->poll(), otherwise
+ * a potential race might occur. In fact if we do this operation inside
+ * the lock, an event might happen between the f_op->poll() call and the
+ * new event set registering.
+ */
+ epi->event.events = event->events;
+
+ /*
+ * Get current event bits. We can safely use the file* here because
+ * its usage count has been increased by the caller of this function.
+ */
+ revents = epi->ffd.file->f_op->poll(epi->ffd.file, NULL);
+
+ spin_lock_irqsave(&ep->lock, flags);
+
+ /* Copy the data member from inside the lock */
+ epi->event.data = event->data;
+
+ /*
+ * If the item is "hot" and it is not registered inside the ready
+ * list, push it inside.
+ */
+ if (revents & event->events) {
+ if (!ep_is_linked(&epi->rdllink)) {
+ list_add_tail(&epi->rdllink, &ep->rdllist);
+
+ /* Notify waiting tasks that events are available */
+ if (waitqueue_active(&ep->wq))
+ __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE |
+ TASK_INTERRUPTIBLE);
+ if (waitqueue_active(&ep->poll_wait))
+ pwake++;
+ }
+ }
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ /* We have to call this outside the lock */
+ if (pwake)
+ ep_poll_safewake(&psw, &ep->poll_wait);
+
+ return 0;
+}
+
+static int ep_send_events(struct eventpoll *ep, struct epoll_event __user *events,
+ int maxevents)
+{
+ int eventcnt, error = -EFAULT, pwake = 0;
+ unsigned int revents;
+ unsigned long flags;
+ struct epitem *epi, *nepi;
+ struct list_head txlist;
+
+ INIT_LIST_HEAD(&txlist);
+
+ /*
+ * We need to lock this because we could be hit by
+ * eventpoll_release_file() and epoll_ctl(EPOLL_CTL_DEL).
+ */
+ mutex_lock(&ep->mtx);
+
+ /*
+ * Steal the ready list, and re-init the original one to the
+ * empty list. Also, set ep->ovflist to NULL so that events
+ * happening while looping w/out locks, are not lost. We cannot
+ * have the poll callback to queue directly on ep->rdllist,
+ * because we are doing it in the loop below, in a lockless way.
+ */
+ spin_lock_irqsave(&ep->lock, flags);
+ list_splice(&ep->rdllist, &txlist);
+ INIT_LIST_HEAD(&ep->rdllist);
+ ep->ovflist = NULL;
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ /*
+ * We can loop without lock because this is a task private list.
+ * We just splice'd out the ep->rdllist in ep_collect_ready_items().
+ * Items cannot vanish during the loop because we are holding "mtx".
+ */
+ for (eventcnt = 0; !list_empty(&txlist) && eventcnt < maxevents;) {
+ epi = list_first_entry(&txlist, struct epitem, rdllink);
+
+ list_del_init(&epi->rdllink);
+
+ /*
+ * Get the ready file event set. We can safely use the file
+ * because we are holding the "mtx" and this will guarantee
+ * that both the file and the item will not vanish.
+ */
+ revents = epi->ffd.file->f_op->poll(epi->ffd.file, NULL);
+ revents &= epi->event.events;
+
+ /*
+ * Is the event mask intersect the caller-requested one,
+ * deliver the event to userspace. Again, we are holding
+ * "mtx", so no operations coming from userspace can change
+ * the item.
+ */
+ if (revents) {
+ if (__put_user(revents,
+ &events[eventcnt].events) ||
+ __put_user(epi->event.data,
+ &events[eventcnt].data))
+ goto errxit;
+ if (epi->event.events & EPOLLONESHOT)
+ epi->event.events &= EP_PRIVATE_BITS;
+ eventcnt++;
+ }
+ /*
+ * At this point, noone can insert into ep->rdllist besides
+ * us. The epoll_ctl() callers are locked out by us holding
+ * "mtx" and the poll callback will queue them in ep->ovflist.
+ */
+ if (!(epi->event.events & EPOLLET) &&
+ (revents & epi->event.events))
+ list_add_tail(&epi->rdllink, &ep->rdllist);
+ }
+ error = 0;
+
+errxit:
+
+ spin_lock_irqsave(&ep->lock, flags);
+ /*
+ * During the time we spent in the loop above, some other events
+ * might have been queued by the poll callback. We re-insert them
+ * here (in case they are not already queued, or they're one-shot).
+ */
+ for (nepi = ep->ovflist; (epi = nepi) != NULL;
+ nepi = epi->next, epi->next = EP_UNACTIVE_PTR) {
+ if (!ep_is_linked(&epi->rdllink) &&
+ (epi->event.events & ~EP_PRIVATE_BITS))
+ list_add_tail(&epi->rdllink, &ep->rdllist);
+ }
+ /*
+ * We need to set back ep->ovflist to EP_UNACTIVE_PTR, so that after
+ * releasing the lock, events will be queued in the normal way inside
+ * ep->rdllist.
+ */
+ ep->ovflist = EP_UNACTIVE_PTR;
+
+ /*
+ * In case of error in the event-send loop, or in case the number of
+ * ready events exceeds the userspace limit, we need to splice the
+ * "txlist" back inside ep->rdllist.
+ */
+ list_splice(&txlist, &ep->rdllist);
+
+ if (!list_empty(&ep->rdllist)) {
+ /*
+ * Wake up (if active) both the eventpoll wait list and the ->poll()
+ * wait list (delayed after we release the lock).
+ */
+ if (waitqueue_active(&ep->wq))
+ __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE |
+ TASK_INTERRUPTIBLE);
+ if (waitqueue_active(&ep->poll_wait))
+ pwake++;
+ }
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ mutex_unlock(&ep->mtx);
+
+ /* We have to call this outside the lock */
+ if (pwake)
+ ep_poll_safewake(&psw, &ep->poll_wait);
+
+ return eventcnt == 0 ? error: eventcnt;
+}
+
+static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
+ int maxevents, long timeout)
+{
+ int res, eavail;
+ unsigned long flags;
+ long jtimeout;
+ wait_queue_t wait;
+
+ /*
+ * Calculate the timeout by checking for the "infinite" value ( -1 )
+ * and the overflow condition. The passed timeout is in milliseconds,
+ * that why (t * HZ) / 1000.
+ */
+ jtimeout = (timeout < 0 || timeout >= EP_MAX_MSTIMEO) ?
+ MAX_SCHEDULE_TIMEOUT : (timeout * HZ + 999) / 1000;
+
+retry:
+ spin_lock_irqsave(&ep->lock, flags);
+
+ res = 0;
+ if (list_empty(&ep->rdllist)) {
+ /*
+ * We don't have any available event to return to the caller.
+ * We need to sleep here, and we will be wake up by
+ * ep_poll_callback() when events will become available.
+ */
+ init_waitqueue_entry(&wait, current);
+ wait.flags |= WQ_FLAG_EXCLUSIVE;
+ __add_wait_queue(&ep->wq, &wait);
+
+ for (;;) {
+ /*
+ * We don't want to sleep if the ep_poll_callback() sends us
+ * a wakeup in between. That's why we set the task state
+ * to TASK_INTERRUPTIBLE before doing the checks.
+ */
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!list_empty(&ep->rdllist) || !jtimeout)
+ break;
+ if (signal_pending(current)) {
+ res = -EINTR;
+ break;
+ }
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+ jtimeout = schedule_timeout(jtimeout);
+ spin_lock_irqsave(&ep->lock, flags);
+ }
+ __remove_wait_queue(&ep->wq, &wait);
+
+ set_current_state(TASK_RUNNING);
+ }
+
+ /* Is it worth to try to dig for events ? */
+ eavail = !list_empty(&ep->rdllist);
+
+ spin_unlock_irqrestore(&ep->lock, flags);
+
+ /*
+ * Try to transfer events to user space. In case we get 0 events and
+ * there's still timeout left over, we go trying again in search of
+ * more luck.
+ */
+ if (!res && eavail &&
+ !(res = ep_send_events(ep, events, maxevents)) && jtimeout)
+ goto retry;
+
+ return res;
+}
+
+/*
+ * It opens an eventpoll file descriptor. The "size" parameter is there
+ * for historical reasons, when epoll was using an hash instead of an
+ * RB tree. With the current implementation, the "size" parameter is ignored
+ * (besides sanity checks).
*/
asmlinkage long sys_epoll_create(int size)
{
@@ -489,39 +1087,37 @@
*/
error = -EINVAL;
if (size <= 0 || (error = ep_alloc(&ep)) != 0)
- goto eexit_1;
+ goto error_return;
/*
* Creates all the items needed to setup an eventpoll file. That is,
* a file structure, and inode and a free file descriptor.
*/
- error = ep_getfd(&fd, &inode, &file, ep);
+ error = anon_inode_getfd(&fd, &inode, &file, "[eventpoll]",
+ &eventpoll_fops, ep);
if (error)
- goto eexit_2;
+ goto error_free;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
current, size, fd));
return fd;
-eexit_2:
+error_free:
ep_free(ep);
- kfree(ep);
-eexit_1:
+error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
current, size, error));
return error;
}
-
/*
* The following function implements the controller interface for
* the eventpoll file that enables the insertion/removal/change of
- * file descriptors inside the interest set. It represents
- * the kernel part of the user space epoll_ctl(2).
+ * file descriptors inside the interest set.
*/
-asmlinkage long
-sys_epoll_ctl(int epfd, int op, int fd, struct epoll_event __user *event)
+asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
+ struct epoll_event __user *event)
{
int error;
struct file *file, *tfile;
@@ -535,23 +1131,23 @@
error = -EFAULT;
if (ep_op_has_event(op) &&
copy_from_user(&epds, event, sizeof(struct epoll_event)))
- goto eexit_1;
+ goto error_return;
/* Get the "struct file *" for the eventpoll file */
error = -EBADF;
file = fget(epfd);
if (!file)
- goto eexit_1;
+ goto error_return;
/* Get the "struct file *" for the target file */
tfile = fget(fd);
if (!tfile)
- goto eexit_2;
+ goto error_fput;
/* The target file descriptor must support poll */
error = -EPERM;
if (!tfile->f_op || !tfile->f_op->poll)
- goto eexit_3;
+ goto error_tgt_fput;
/*
* We have to check that the file structure underneath the file descriptor
@@ -560,7 +1156,7 @@
*/
error = -EINVAL;
if (file == tfile || !is_file_epoll(file))
- goto eexit_3;
+ goto error_tgt_fput;
/*
* At this point it is safe to assume that the "private_data" contains
@@ -568,9 +1164,13 @@
*/
ep = file->private_data;
- down_write(&ep->sem);
+ mutex_lock(&ep->mtx);
- /* Try to lookup the file inside our RB tree */
+ /*
+ * Try to lookup the file inside our RB tree, Since we grabbed "mtx"
+ * above, we can be sure to be able to use the item looked up by
+ * ep_find() till we release the mutex.
+ */
epi = ep_find(ep, tfile, fd);
error = -EINVAL;
@@ -597,28 +1197,19 @@
error = -ENOENT;
break;
}
+ mutex_unlock(&ep->mtx);
- /*
- * The function ep_find() increments the usage count of the structure
- * so, if this is not NULL, we need to release it.
- */
- if (epi)
- ep_release_epitem(epi);
-
- up_write(&ep->sem);
-
-eexit_3:
+error_tgt_fput:
fput(tfile);
-eexit_2:
+error_fput:
fput(file);
-eexit_1:
+error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_ctl(%d, %d, %d, %p) = %d\n",
current, epfd, op, fd, event, error));
return error;
}
-
/*
* Implement the event wait interface for the eventpoll file. It is the kernel
* part of the user space epoll_wait(2).
@@ -640,14 +1231,14 @@
/* Verify that the area passed by the user is writeable */
if (!access_ok(VERIFY_WRITE, events, maxevents * sizeof(struct epoll_event))) {
error = -EFAULT;
- goto eexit_1;
+ goto error_return;
}
/* Get the "struct file *" for the eventpoll file */
error = -EBADF;
file = fget(epfd);
if (!file)
- goto eexit_1;
+ goto error_return;
/*
* We have to check that the file structure underneath the fd
@@ -655,7 +1246,7 @@
*/
error = -EINVAL;
if (!is_file_epoll(file))
- goto eexit_2;
+ goto error_fput;
/*
* At this point it is safe to assume that the "private_data" contains
@@ -666,16 +1257,15 @@
/* Time to fish for events ... */
error = ep_poll(ep, events, maxevents, timeout);
-eexit_2:
+error_fput:
fput(file);
-eexit_1:
+error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_wait(%d, %p, %d, %d) = %d\n",
current, epfd, events, maxevents, timeout, error));
return error;
}
-
#ifdef TIF_RESTORE_SIGMASK
/*
@@ -713,7 +1303,7 @@
if (sigmask) {
if (error == -EINTR) {
memcpy(¤t->saved_sigmask, &sigsaved,
- sizeof(sigsaved));
+ sizeof(sigsaved));
set_thread_flag(TIF_RESTORE_SIGMASK);
} else
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
@@ -724,881 +1314,8 @@
#endif /* #ifdef TIF_RESTORE_SIGMASK */
-
-/*
- * Creates the file descriptor to be used by the epoll interface.
- */
-static int ep_getfd(int *efd, struct inode **einode, struct file **efile,
- struct eventpoll *ep)
-{
- struct qstr this;
- char name[32];
- struct dentry *dentry;
- struct inode *inode;
- struct file *file;
- int error, fd;
-
- /* Get an ready to use file */
- error = -ENFILE;
- file = get_empty_filp();
- if (!file)
- goto eexit_1;
-
- /* Allocates an inode from the eventpoll file system */
- inode = ep_eventpoll_inode();
- if (IS_ERR(inode)) {
- error = PTR_ERR(inode);
- goto eexit_2;
- }
-
- /* Allocates a free descriptor to plug the file onto */
- error = get_unused_fd();
- if (error < 0)
- goto eexit_3;
- fd = error;
-
- /*
- * Link the inode to a directory entry by creating a unique name
- * using the inode number.
- */
- error = -ENOMEM;
- sprintf(name, "[%lu]", inode->i_ino);
- this.name = name;
- this.len = strlen(name);
- this.hash = inode->i_ino;
- dentry = d_alloc(eventpoll_mnt->mnt_sb->s_root, &this);
- if (!dentry)
- goto eexit_4;
- dentry->d_op = &eventpollfs_dentry_operations;
- d_add(dentry, inode);
- file->f_path.mnt = mntget(eventpoll_mnt);
- file->f_path.dentry = dentry;
- file->f_mapping = inode->i_mapping;
-
- file->f_pos = 0;
- file->f_flags = O_RDONLY;
- file->f_op = &eventpoll_fops;
- file->f_mode = FMODE_READ;
- file->f_version = 0;
- file->private_data = ep;
-
- /* Install the new setup file into the allocated fd. */
- fd_install(fd, file);
-
- *efd = fd;
- *einode = inode;
- *efile = file;
- return 0;
-
-eexit_4:
- put_unused_fd(fd);
-eexit_3:
- iput(inode);
-eexit_2:
- put_filp(file);
-eexit_1:
- return error;
-}
-
-
-static int ep_alloc(struct eventpoll **pep)
-{
- struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
-
- if (!ep)
- return -ENOMEM;
-
- rwlock_init(&ep->lock);
- init_rwsem(&ep->sem);
- init_waitqueue_head(&ep->wq);
- init_waitqueue_head(&ep->poll_wait);
- INIT_LIST_HEAD(&ep->rdllist);
- ep->rbr = RB_ROOT;
-
- *pep = ep;
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
- current, ep));
- return 0;
-}
-
-
-static void ep_free(struct eventpoll *ep)
-{
- struct rb_node *rbp;
- struct epitem *epi;
-
- /* We need to release all tasks waiting for these file */
- if (waitqueue_active(&ep->poll_wait))
- ep_poll_safewake(&psw, &ep->poll_wait);
-
- /*
- * We need to lock this because we could be hit by
- * eventpoll_release_file() while we're freeing the "struct eventpoll".
- * We do not need to hold "ep->sem" here because the epoll file
- * is on the way to be removed and no one has references to it
- * anymore. The only hit might come from eventpoll_release_file() but
- * holding "epmutex" is sufficent here.
- */
- mutex_lock(&epmutex);
-
- /*
- * Walks through the whole tree by unregistering poll callbacks.
- */
- for (rbp = rb_first(&ep->rbr); rbp; rbp = rb_next(rbp)) {
- epi = rb_entry(rbp, struct epitem, rbn);
-
- ep_unregister_pollwait(ep, epi);
- }
-
- /*
- * Walks through the whole tree by freeing each "struct epitem". At this
- * point we are sure no poll callbacks will be lingering around, and also by
- * write-holding "sem" we can be sure that no file cleanup code will hit
- * us during this operation. So we can avoid the lock on "ep->lock".
- */
- while ((rbp = rb_first(&ep->rbr)) != 0) {
- epi = rb_entry(rbp, struct epitem, rbn);
- ep_remove(ep, epi);
- }
-
- mutex_unlock(&epmutex);
-}
-
-
-/*
- * Search the file inside the eventpoll tree. It add usage count to
- * the returned item, so the caller must call ep_release_epitem()
- * after finished using the "struct epitem".
- */
-static struct epitem *ep_find(struct eventpoll *ep, struct file *file, int fd)
-{
- int kcmp;
- unsigned long flags;
- struct rb_node *rbp;
- struct epitem *epi, *epir = NULL;
- struct epoll_filefd ffd;
-
- ep_set_ffd(&ffd, file, fd);
- read_lock_irqsave(&ep->lock, flags);
- for (rbp = ep->rbr.rb_node; rbp; ) {
- epi = rb_entry(rbp, struct epitem, rbn);
- kcmp = ep_cmp_ffd(&ffd, &epi->ffd);
- if (kcmp > 0)
- rbp = rbp->rb_right;
- else if (kcmp < 0)
- rbp = rbp->rb_left;
- else {
- ep_use_epitem(epi);
- epir = epi;
- break;
- }
- }
- read_unlock_irqrestore(&ep->lock, flags);
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_find(%p) -> %p\n",
- current, file, epir));
-
- return epir;
-}
-
-
-/*
- * Increment the usage count of the "struct epitem" making it sure
- * that the user will have a valid pointer to reference.
- */
-static void ep_use_epitem(struct epitem *epi)
-{
-
- atomic_inc(&epi->usecnt);
-}
-
-
-/*
- * Decrement ( release ) the usage count by signaling that the user
- * has finished using the structure. It might lead to freeing the
- * structure itself if the count goes to zero.
- */
-static void ep_release_epitem(struct epitem *epi)
-{
-
- if (atomic_dec_and_test(&epi->usecnt))
- kmem_cache_free(epi_cache, epi);
-}
-
-
-/*
- * This is the callback that is used to add our wait queue to the
- * target file wakeup lists.
- */
-static void ep_ptable_queue_proc(struct file *file, wait_queue_head_t *whead,
- poll_table *pt)
-{
- struct epitem *epi = ep_item_from_epqueue(pt);
- struct eppoll_entry *pwq;
-
- if (epi->nwait >= 0 && (pwq = kmem_cache_alloc(pwq_cache, GFP_KERNEL))) {
- init_waitqueue_func_entry(&pwq->wait, ep_poll_callback);
- pwq->whead = whead;
- pwq->base = epi;
- add_wait_queue(whead, &pwq->wait);
- list_add_tail(&pwq->llink, &epi->pwqlist);
- epi->nwait++;
- } else {
- /* We have to signal that an error occurred */
- epi->nwait = -1;
- }
-}
-
-
-static void ep_rbtree_insert(struct eventpoll *ep, struct epitem *epi)
-{
- int kcmp;
- struct rb_node **p = &ep->rbr.rb_node, *parent = NULL;
- struct epitem *epic;
-
- while (*p) {
- parent = *p;
- epic = rb_entry(parent, struct epitem, rbn);
- kcmp = ep_cmp_ffd(&epi->ffd, &epic->ffd);
- if (kcmp > 0)
- p = &parent->rb_right;
- else
- p = &parent->rb_left;
- }
- rb_link_node(&epi->rbn, parent, p);
- rb_insert_color(&epi->rbn, &ep->rbr);
-}
-
-
-static int ep_insert(struct eventpoll *ep, struct epoll_event *event,
- struct file *tfile, int fd)
-{
- int error, revents, pwake = 0;
- unsigned long flags;
- struct epitem *epi;
- struct ep_pqueue epq;
-
- error = -ENOMEM;
- if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
- goto eexit_1;
-
- /* Item initialization follow here ... */
- ep_rb_initnode(&epi->rbn);
- INIT_LIST_HEAD(&epi->rdllink);
- INIT_LIST_HEAD(&epi->fllink);
- INIT_LIST_HEAD(&epi->pwqlist);
- epi->ep = ep;
- ep_set_ffd(&epi->ffd, tfile, fd);
- epi->event = *event;
- atomic_set(&epi->usecnt, 1);
- epi->nwait = 0;
-
- /* Initialize the poll table using the queue callback */
- epq.epi = epi;
- init_poll_funcptr(&epq.pt, ep_ptable_queue_proc);
-
- /*
- * Attach the item to the poll hooks and get current event bits.
- * We can safely use the file* here because its usage count has
- * been increased by the caller of this function.
- */
- revents = tfile->f_op->poll(tfile, &epq.pt);
-
- /*
- * We have to check if something went wrong during the poll wait queue
- * install process. Namely an allocation for a wait queue failed due
- * high memory pressure.
- */
- if (epi->nwait < 0)
- goto eexit_2;
-
- /* Add the current item to the list of active epoll hook for this file */
- spin_lock(&tfile->f_ep_lock);
- list_add_tail(&epi->fllink, &tfile->f_ep_links);
- spin_unlock(&tfile->f_ep_lock);
-
- /* We have to drop the new item inside our item list to keep track of it */
- write_lock_irqsave(&ep->lock, flags);
-
- /* Add the current item to the rb-tree */
- ep_rbtree_insert(ep, epi);
-
- /* If the file is already "ready" we drop it inside the ready list */
- if ((revents & event->events) && !ep_is_linked(&epi->rdllink)) {
- list_add_tail(&epi->rdllink, &ep->rdllist);
-
- /* Notify waiting tasks that events are available */
- if (waitqueue_active(&ep->wq))
- __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE);
- if (waitqueue_active(&ep->poll_wait))
- pwake++;
- }
-
- write_unlock_irqrestore(&ep->lock, flags);
-
- /* We have to call this outside the lock */
- if (pwake)
- ep_poll_safewake(&psw, &ep->poll_wait);
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_insert(%p, %p, %d)\n",
- current, ep, tfile, fd));
-
- return 0;
-
-eexit_2:
- ep_unregister_pollwait(ep, epi);
-
- /*
- * We need to do this because an event could have been arrived on some
- * allocated wait queue.
- */
- write_lock_irqsave(&ep->lock, flags);
- if (ep_is_linked(&epi->rdllink))
- list_del_init(&epi->rdllink);
- write_unlock_irqrestore(&ep->lock, flags);
-
- kmem_cache_free(epi_cache, epi);
-eexit_1:
- return error;
-}
-
-
-/*
- * Modify the interest event mask by dropping an event if the new mask
- * has a match in the current file status.
- */
-static int ep_modify(struct eventpoll *ep, struct epitem *epi, struct epoll_event *event)
-{
- int pwake = 0;
- unsigned int revents;
- unsigned long flags;
-
- /*
- * Set the new event interest mask before calling f_op->poll(), otherwise
- * a potential race might occur. In fact if we do this operation inside
- * the lock, an event might happen between the f_op->poll() call and the
- * new event set registering.
- */
- epi->event.events = event->events;
-
- /*
- * Get current event bits. We can safely use the file* here because
- * its usage count has been increased by the caller of this function.
- */
- revents = epi->ffd.file->f_op->poll(epi->ffd.file, NULL);
-
- write_lock_irqsave(&ep->lock, flags);
-
- /* Copy the data member from inside the lock */
- epi->event.data = event->data;
-
- /*
- * If the item is not linked to the RB tree it means that it's on its
- * way toward the removal. Do nothing in this case.
- */
- if (ep_rb_linked(&epi->rbn)) {
- /*
- * If the item is "hot" and it is not registered inside the ready
- * list, push it inside. If the item is not "hot" and it is currently
- * registered inside the ready list, unlink it.
- */
- if (revents & event->events) {
- if (!ep_is_linked(&epi->rdllink)) {
- list_add_tail(&epi->rdllink, &ep->rdllist);
-
- /* Notify waiting tasks that events are available */
- if (waitqueue_active(&ep->wq))
- __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE |
- TASK_INTERRUPTIBLE);
- if (waitqueue_active(&ep->poll_wait))
- pwake++;
- }
- }
- }
-
- write_unlock_irqrestore(&ep->lock, flags);
-
- /* We have to call this outside the lock */
- if (pwake)
- ep_poll_safewake(&psw, &ep->poll_wait);
-
- return 0;
-}
-
-
-/*
- * This function unregister poll callbacks from the associated file descriptor.
- * Since this must be called without holding "ep->lock" the atomic exchange trick
- * will protect us from multiple unregister.
- */
-static void ep_unregister_pollwait(struct eventpoll *ep, struct epitem *epi)
-{
- int nwait;
- struct list_head *lsthead = &epi->pwqlist;
- struct eppoll_entry *pwq;
-
- /* This is called without locks, so we need the atomic exchange */
- nwait = xchg(&epi->nwait, 0);
-
- if (nwait) {
- while (!list_empty(lsthead)) {
- pwq = list_first_entry(lsthead, struct eppoll_entry, llink);
-
- list_del_init(&pwq->llink);
- remove_wait_queue(pwq->whead, &pwq->wait);
- kmem_cache_free(pwq_cache, pwq);
- }
- }
-}
-
-
-/*
- * Unlink the "struct epitem" from all places it might have been hooked up.
- * This function must be called with write IRQ lock on "ep->lock".
- */
-static int ep_unlink(struct eventpoll *ep, struct epitem *epi)
-{
- int error;
-
- /*
- * It can happen that this one is called for an item already unlinked.
- * The check protect us from doing a double unlink ( crash ).
- */
- error = -ENOENT;
- if (!ep_rb_linked(&epi->rbn))
- goto eexit_1;
-
- /*
- * Clear the event mask for the unlinked item. This will avoid item
- * notifications to be sent after the unlink operation from inside
- * the kernel->userspace event transfer loop.
- */
- epi->event.events = 0;
-
- /*
- * At this point is safe to do the job, unlink the item from our rb-tree.
- * This operation togheter with the above check closes the door to
- * double unlinks.
- */
- ep_rb_erase(&epi->rbn, &ep->rbr);
-
- /*
- * If the item we are going to remove is inside the ready file descriptors
- * we want to remove it from this list to avoid stale events.
- */
- if (ep_is_linked(&epi->rdllink))
- list_del_init(&epi->rdllink);
-
- error = 0;
-eexit_1:
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_unlink(%p, %p) = %d\n",
- current, ep, epi->ffd.file, error));
-
- return error;
-}
-
-
-/*
- * Removes a "struct epitem" from the eventpoll RB tree and deallocates
- * all the associated resources.
- */
-static int ep_remove(struct eventpoll *ep, struct epitem *epi)
-{
- int error;
- unsigned long flags;
- struct file *file = epi->ffd.file;
-
- /*
- * Removes poll wait queue hooks. We _have_ to do this without holding
- * the "ep->lock" otherwise a deadlock might occur. This because of the
- * sequence of the lock acquisition. Here we do "ep->lock" then the wait
- * queue head lock when unregistering the wait queue. The wakeup callback
- * will run by holding the wait queue head lock and will call our callback
- * that will try to get "ep->lock".
- */
- ep_unregister_pollwait(ep, epi);
-
- /* Remove the current item from the list of epoll hooks */
- spin_lock(&file->f_ep_lock);
- if (ep_is_linked(&epi->fllink))
- list_del_init(&epi->fllink);
- spin_unlock(&file->f_ep_lock);
-
- /* We need to acquire the write IRQ lock before calling ep_unlink() */
- write_lock_irqsave(&ep->lock, flags);
-
- /* Really unlink the item from the RB tree */
- error = ep_unlink(ep, epi);
-
- write_unlock_irqrestore(&ep->lock, flags);
-
- if (error)
- goto eexit_1;
-
- /* At this point it is safe to free the eventpoll item */
- ep_release_epitem(epi);
-
- error = 0;
-eexit_1:
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p) = %d\n",
- current, ep, file, error));
-
- return error;
-}
-
-
-/*
- * This is the callback that is passed to the wait queue wakeup
- * machanism. It is called by the stored file descriptors when they
- * have events to report.
- */
-static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *key)
-{
- int pwake = 0;
- unsigned long flags;
- struct epitem *epi = ep_item_from_wait(wait);
- struct eventpoll *ep = epi->ep;
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: poll_callback(%p) epi=%p ep=%p\n",
- current, epi->ffd.file, epi, ep));
-
- write_lock_irqsave(&ep->lock, flags);
-
- /*
- * If the event mask does not contain any poll(2) event, we consider the
- * descriptor to be disabled. This condition is likely the effect of the
- * EPOLLONESHOT bit that disables the descriptor when an event is received,
- * until the next EPOLL_CTL_MOD will be issued.
- */
- if (!(epi->event.events & ~EP_PRIVATE_BITS))
- goto is_disabled;
-
- /* If this file is already in the ready list we exit soon */
- if (ep_is_linked(&epi->rdllink))
- goto is_linked;
-
- list_add_tail(&epi->rdllink, &ep->rdllist);
-
-is_linked:
- /*
- * Wake up ( if active ) both the eventpoll wait list and the ->poll()
- * wait list.
- */
- if (waitqueue_active(&ep->wq))
- __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE |
- TASK_INTERRUPTIBLE);
- if (waitqueue_active(&ep->poll_wait))
- pwake++;
-
-is_disabled:
- write_unlock_irqrestore(&ep->lock, flags);
-
- /* We have to call this outside the lock */
- if (pwake)
- ep_poll_safewake(&psw, &ep->poll_wait);
-
- return 1;
-}
-
-
-static int ep_eventpoll_close(struct inode *inode, struct file *file)
-{
- struct eventpoll *ep = file->private_data;
-
- if (ep) {
- ep_free(ep);
- kfree(ep);
- }
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: close() ep=%p\n", current, ep));
- return 0;
-}
-
-
-static unsigned int ep_eventpoll_poll(struct file *file, poll_table *wait)
-{
- unsigned int pollflags = 0;
- unsigned long flags;
- struct eventpoll *ep = file->private_data;
-
- /* Insert inside our poll wait queue */
- poll_wait(file, &ep->poll_wait, wait);
-
- /* Check our condition */
- read_lock_irqsave(&ep->lock, flags);
- if (!list_empty(&ep->rdllist))
- pollflags = POLLIN | POLLRDNORM;
- read_unlock_irqrestore(&ep->lock, flags);
-
- return pollflags;
-}
-
-
-/*
- * This function is called without holding the "ep->lock" since the call to
- * __copy_to_user() might sleep, and also f_op->poll() might reenable the IRQ
- * because of the way poll() is traditionally implemented in Linux.
- */
-static int ep_send_events(struct eventpoll *ep, struct list_head *txlist,
- struct epoll_event __user *events, int maxevents)
-{
- int eventcnt, error = -EFAULT, pwake = 0;
- unsigned int revents;
- unsigned long flags;
- struct epitem *epi;
- struct list_head injlist;
-
- INIT_LIST_HEAD(&injlist);
-
- /*
- * We can loop without lock because this is a task private list.
- * We just splice'd out the ep->rdllist in ep_collect_ready_items().
- * Items cannot vanish during the loop because we are holding "sem" in
- * read.
- */
- for (eventcnt = 0; !list_empty(txlist) && eventcnt < maxevents;) {
- epi = list_first_entry(txlist, struct epitem, rdllink);
- prefetch(epi->rdllink.next);
-
- /*
- * Get the ready file event set. We can safely use the file
- * because we are holding the "sem" in read and this will
- * guarantee that both the file and the item will not vanish.
- */
- revents = epi->ffd.file->f_op->poll(epi->ffd.file, NULL);
- revents &= epi->event.events;
-
- /*
- * Is the event mask intersect the caller-requested one,
- * deliver the event to userspace. Again, we are holding
- * "sem" in read, so no operations coming from userspace
- * can change the item.
- */
- if (revents) {
- if (__put_user(revents,
- &events[eventcnt].events) ||
- __put_user(epi->event.data,
- &events[eventcnt].data))
- goto errxit;
- if (epi->event.events & EPOLLONESHOT)
- epi->event.events &= EP_PRIVATE_BITS;
- eventcnt++;
- }
-
- /*
- * This is tricky. We are holding the "sem" in read, and this
- * means that the operations that can change the "linked" status
- * of the epoll item (epi->rbn and epi->rdllink), cannot touch
- * them. Also, since we are "linked" from a epi->rdllink POV
- * (the item is linked to our transmission list we just
- * spliced), the ep_poll_callback() cannot touch us either,
- * because of the check present in there. Another parallel
- * epoll_wait() will not get the same result set, since we
- * spliced the ready list before. Note that list_del() still
- * shows the item as linked to the test in ep_poll_callback().
- */
- list_del(&epi->rdllink);
- if (!(epi->event.events & EPOLLET) &&
- (revents & epi->event.events))
- list_add_tail(&epi->rdllink, &injlist);
- else {
- /*
- * Be sure the item is totally detached before re-init
- * the list_head. After INIT_LIST_HEAD() is committed,
- * the ep_poll_callback() can requeue the item again,
- * but we don't care since we are already past it.
- */
- smp_mb();
- INIT_LIST_HEAD(&epi->rdllink);
- }
- }
- error = 0;
-
- errxit:
-
- /*
- * If the re-injection list or the txlist are not empty, re-splice
- * them to the ready list and do proper wakeups.
- */
- if (!list_empty(&injlist) || !list_empty(txlist)) {
- write_lock_irqsave(&ep->lock, flags);
-
- list_splice(txlist, &ep->rdllist);
- list_splice(&injlist, &ep->rdllist);
- /*
- * Wake up ( if active ) both the eventpoll wait list and the ->poll()
- * wait list.
- */
- if (waitqueue_active(&ep->wq))
- __wake_up_locked(&ep->wq, TASK_UNINTERRUPTIBLE |
- TASK_INTERRUPTIBLE);
- if (waitqueue_active(&ep->poll_wait))
- pwake++;
-
- write_unlock_irqrestore(&ep->lock, flags);
- }
-
- /* We have to call this outside the lock */
- if (pwake)
- ep_poll_safewake(&psw, &ep->poll_wait);
-
- return eventcnt == 0 ? error: eventcnt;
-}
-
-
-/*
- * Perform the transfer of events to user space.
- */
-static int ep_events_transfer(struct eventpoll *ep,
- struct epoll_event __user *events, int maxevents)
-{
- int eventcnt;
- unsigned long flags;
- struct list_head txlist;
-
- INIT_LIST_HEAD(&txlist);
-
- /*
- * We need to lock this because we could be hit by
- * eventpoll_release_file() and epoll_ctl(EPOLL_CTL_DEL).
- */
- down_read(&ep->sem);
-
- /*
- * Steal the ready list, and re-init the original one to the
- * empty list.
- */
- write_lock_irqsave(&ep->lock, flags);
- list_splice(&ep->rdllist, &txlist);
- INIT_LIST_HEAD(&ep->rdllist);
- write_unlock_irqrestore(&ep->lock, flags);
-
- /* Build result set in userspace */
- eventcnt = ep_send_events(ep, &txlist, events, maxevents);
-
- up_read(&ep->sem);
-
- return eventcnt;
-}
-
-
-static int ep_poll(struct eventpoll *ep, struct epoll_event __user *events,
- int maxevents, long timeout)
-{
- int res, eavail;
- unsigned long flags;
- long jtimeout;
- wait_queue_t wait;
-
- /*
- * Calculate the timeout by checking for the "infinite" value ( -1 )
- * and the overflow condition. The passed timeout is in milliseconds,
- * that why (t * HZ) / 1000.
- */
- jtimeout = (timeout < 0 || timeout >= EP_MAX_MSTIMEO) ?
- MAX_SCHEDULE_TIMEOUT : (timeout * HZ + 999) / 1000;
-
-retry:
- write_lock_irqsave(&ep->lock, flags);
-
- res = 0;
- if (list_empty(&ep->rdllist)) {
- /*
- * We don't have any available event to return to the caller.
- * We need to sleep here, and we will be wake up by
- * ep_poll_callback() when events will become available.
- */
- init_waitqueue_entry(&wait, current);
- __add_wait_queue(&ep->wq, &wait);
-
- for (;;) {
- /*
- * We don't want to sleep if the ep_poll_callback() sends us
- * a wakeup in between. That's why we set the task state
- * to TASK_INTERRUPTIBLE before doing the checks.
- */
- set_current_state(TASK_INTERRUPTIBLE);
- if (!list_empty(&ep->rdllist) || !jtimeout)
- break;
- if (signal_pending(current)) {
- res = -EINTR;
- break;
- }
-
- write_unlock_irqrestore(&ep->lock, flags);
- jtimeout = schedule_timeout(jtimeout);
- write_lock_irqsave(&ep->lock, flags);
- }
- __remove_wait_queue(&ep->wq, &wait);
-
- set_current_state(TASK_RUNNING);
- }
-
- /* Is it worth to try to dig for events ? */
- eavail = !list_empty(&ep->rdllist);
-
- write_unlock_irqrestore(&ep->lock, flags);
-
- /*
- * Try to transfer events to user space. In case we get 0 events and
- * there's still timeout left over, we go trying again in search of
- * more luck.
- */
- if (!res && eavail &&
- !(res = ep_events_transfer(ep, events, maxevents)) && jtimeout)
- goto retry;
-
- return res;
-}
-
-static int eventpollfs_delete_dentry(struct dentry *dentry)
-{
-
- return 1;
-}
-
-static struct inode *ep_eventpoll_inode(void)
-{
- int error = -ENOMEM;
- struct inode *inode = new_inode(eventpoll_mnt->mnt_sb);
-
- if (!inode)
- goto eexit_1;
-
- inode->i_fop = &eventpoll_fops;
-
- /*
- * Mark the inode dirty from the very beginning,
- * that way it will never be moved to the dirty
- * list because mark_inode_dirty() will think
- * that it already _is_ on the dirty list.
- */
- inode->i_state = I_DIRTY;
- inode->i_mode = S_IRUSR | S_IWUSR;
- inode->i_uid = current->fsuid;
- inode->i_gid = current->fsgid;
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- return inode;
-
-eexit_1:
- return ERR_PTR(error);
-}
-
-static int
-eventpollfs_get_sb(struct file_system_type *fs_type, int flags,
- const char *dev_name, void *data, struct vfsmount *mnt)
-{
- return get_sb_pseudo(fs_type, "eventpoll:", NULL, EVENTPOLLFS_MAGIC,
- mnt);
-}
-
-
static int __init eventpoll_init(void)
{
- int error;
-
mutex_init(&epmutex);
/* Initialize the structure used to perform safe poll wait head wake ups */
@@ -1614,39 +1331,7 @@
sizeof(struct eppoll_entry), 0,
EPI_SLAB_DEBUG|SLAB_PANIC, NULL, NULL);
- /*
- * Register the virtual file system that will be the source of inodes
- * for the eventpoll files
- */
- error = register_filesystem(&eventpoll_fs_type);
- if (error)
- goto epanic;
-
- /* Mount the above commented virtual file system */
- eventpoll_mnt = kern_mount(&eventpoll_fs_type);
- error = PTR_ERR(eventpoll_mnt);
- if (IS_ERR(eventpoll_mnt))
- goto epanic;
-
- DNPRINTK(3, (KERN_INFO "[%p] eventpoll: successfully initialized.\n",
- current));
return 0;
-
-epanic:
- panic("eventpoll_init() failed\n");
}
+fs_initcall(eventpoll_init);
-
-static void __exit eventpoll_exit(void)
-{
- /* Undo all operations done inside eventpoll_init() */
- unregister_filesystem(&eventpoll_fs_type);
- mntput(eventpoll_mnt);
- kmem_cache_destroy(pwq_cache);
- kmem_cache_destroy(epi_cache);
-}
-
-module_init(eventpoll_init);
-module_exit(eventpoll_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/fs/exec.c b/fs/exec.c
index 1ba85c7..70fa3655 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -50,6 +50,7 @@
#include <linux/tsacct_kern.h>
#include <linux/cn_proc.h>
#include <linux/audit.h>
+#include <linux/signalfd.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
@@ -582,6 +583,13 @@
int count;
/*
+ * Tell all the sighand listeners that this sighand has
+ * been detached. The signalfd_detach() function grabs the
+ * sighand lock, if signal listeners are present on the sighand.
+ */
+ signalfd_detach(tsk);
+
+ /*
* If we don't share sighandlers, then we aren't sharing anything
* and we can just re-use it all.
*/
@@ -702,7 +710,7 @@
*/
detach_pid(tsk, PIDTYPE_PID);
tsk->pid = leader->pid;
- attach_pid(tsk, PIDTYPE_PID, tsk->pid);
+ attach_pid(tsk, PIDTYPE_PID, find_pid(tsk->pid));
transfer_pid(leader, tsk, PIDTYPE_PGID);
transfer_pid(leader, tsk, PIDTYPE_SID);
list_replace_rcu(&leader->tasks, &tsk->tasks);
@@ -757,8 +765,7 @@
spin_unlock(&oldsighand->siglock);
write_unlock_irq(&tasklist_lock);
- if (atomic_dec_and_test(&oldsighand->count))
- kmem_cache_free(sighand_cachep, oldsighand);
+ __cleanup_sighand(oldsighand);
}
BUG_ON(!thread_group_leader(tsk));
@@ -1488,6 +1495,8 @@
int flag = 0;
int ispipe = 0;
+ audit_core_dumps(signr);
+
binfmt = current->binfmt;
if (!binfmt || !binfmt->core_dump)
goto fail;
diff --git a/fs/locks.c b/fs/locks.c
index 671a034..8ec16ab 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -669,7 +669,6 @@
{
struct file_lock *cfl;
- fl->fl_type = F_UNLCK;
lock_kernel();
for (cfl = filp->f_path.dentry->d_inode->i_flock; cfl; cfl = cfl->fl_next) {
if (!IS_POSIX(cfl))
@@ -681,7 +680,8 @@
__locks_copy_lock(fl, cfl);
unlock_kernel();
return 1;
- }
+ } else
+ fl->fl_type = F_UNLCK;
unlock_kernel();
return 0;
}
@@ -1632,6 +1632,7 @@
flock->l_len = fl->fl_end == OFFSET_MAX ? 0 :
fl->fl_end - fl->fl_start + 1;
flock->l_whence = 0;
+ flock->l_type = fl->fl_type;
return 0;
}
diff --git a/fs/mpage.c b/fs/mpage.c
index 0fb914f..c1698f2 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -454,11 +454,18 @@
* written, so it can intelligently allocate a suitably-sized BIO. For now,
* just allocate full-size (16-page) BIOs.
*/
-static struct bio *
-__mpage_writepage(struct bio *bio, struct page *page, get_block_t get_block,
- sector_t *last_block_in_bio, int *ret, struct writeback_control *wbc,
- writepage_t writepage_fn)
+struct mpage_data {
+ struct bio *bio;
+ sector_t last_block_in_bio;
+ get_block_t *get_block;
+ unsigned use_writepage;
+};
+
+static int __mpage_writepage(struct page *page, struct writeback_control *wbc,
+ void *data)
{
+ struct mpage_data *mpd = data;
+ struct bio *bio = mpd->bio;
struct address_space *mapping = page->mapping;
struct inode *inode = page->mapping->host;
const unsigned blkbits = inode->i_blkbits;
@@ -476,6 +483,7 @@
int length;
struct buffer_head map_bh;
loff_t i_size = i_size_read(inode);
+ int ret = 0;
if (page_has_buffers(page)) {
struct buffer_head *head = page_buffers(page);
@@ -538,7 +546,7 @@
map_bh.b_state = 0;
map_bh.b_size = 1 << blkbits;
- if (get_block(inode, block_in_file, &map_bh, 1))
+ if (mpd->get_block(inode, block_in_file, &map_bh, 1))
goto confused;
if (buffer_new(&map_bh))
unmap_underlying_metadata(map_bh.b_bdev,
@@ -584,7 +592,7 @@
/*
* This page will go to BIO. Do we need to send this BIO off first?
*/
- if (bio && *last_block_in_bio != blocks[0] - 1)
+ if (bio && mpd->last_block_in_bio != blocks[0] - 1)
bio = mpage_bio_submit(WRITE, bio);
alloc_new:
@@ -641,7 +649,7 @@
boundary_block, 1 << blkbits);
}
} else {
- *last_block_in_bio = blocks[blocks_per_page - 1];
+ mpd->last_block_in_bio = blocks[blocks_per_page - 1];
}
goto out;
@@ -649,18 +657,19 @@
if (bio)
bio = mpage_bio_submit(WRITE, bio);
- if (writepage_fn) {
- *ret = (*writepage_fn)(page, wbc);
+ if (mpd->use_writepage) {
+ ret = mapping->a_ops->writepage(page, wbc);
} else {
- *ret = -EAGAIN;
+ ret = -EAGAIN;
goto out;
}
/*
* The caller has a ref on the inode, so *mapping is stable
*/
- mapping_set_error(mapping, *ret);
+ mapping_set_error(mapping, ret);
out:
- return bio;
+ mpd->bio = bio;
+ return ret;
}
/**
@@ -683,120 +692,27 @@
* the call was made get new I/O started against them. If wbc->sync_mode is
* WB_SYNC_ALL then we were called for data integrity and we must wait for
* existing IO to complete.
- *
- * If you fix this you should check generic_writepages() also!
*/
int
mpage_writepages(struct address_space *mapping,
struct writeback_control *wbc, get_block_t get_block)
{
- struct backing_dev_info *bdi = mapping->backing_dev_info;
- struct bio *bio = NULL;
- sector_t last_block_in_bio = 0;
- int ret = 0;
- int done = 0;
- int (*writepage)(struct page *page, struct writeback_control *wbc);
- struct pagevec pvec;
- int nr_pages;
- pgoff_t index;
- pgoff_t end; /* Inclusive */
- int scanned = 0;
- int range_whole = 0;
+ int ret;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- return 0;
+ if (!get_block)
+ ret = generic_writepages(mapping, wbc);
+ else {
+ struct mpage_data mpd = {
+ .bio = NULL,
+ .last_block_in_bio = 0,
+ .get_block = get_block,
+ .use_writepage = 1,
+ };
+
+ ret = write_cache_pages(mapping, wbc, __mpage_writepage, &mpd);
+ if (mpd.bio)
+ mpage_bio_submit(WRITE, mpd.bio);
}
-
- writepage = NULL;
- if (get_block == NULL)
- writepage = mapping->a_ops->writepage;
-
- pagevec_init(&pvec, 0);
- if (wbc->range_cyclic) {
- index = mapping->writeback_index; /* Start from prev offset */
- end = -1;
- } else {
- index = wbc->range_start >> PAGE_CACHE_SHIFT;
- end = wbc->range_end >> PAGE_CACHE_SHIFT;
- if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
- range_whole = 1;
- scanned = 1;
- }
-retry:
- while (!done && (index <= end) &&
- (nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
- PAGECACHE_TAG_DIRTY,
- min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1))) {
- unsigned i;
-
- scanned = 1;
- for (i = 0; i < nr_pages; i++) {
- struct page *page = pvec.pages[i];
-
- /*
- * At this point we hold neither mapping->tree_lock nor
- * lock on the page itself: the page may be truncated or
- * invalidated (changing page->mapping to NULL), or even
- * swizzled back from swapper_space to tmpfs file
- * mapping
- */
-
- lock_page(page);
-
- if (unlikely(page->mapping != mapping)) {
- unlock_page(page);
- continue;
- }
-
- if (!wbc->range_cyclic && page->index > end) {
- done = 1;
- unlock_page(page);
- continue;
- }
-
- if (wbc->sync_mode != WB_SYNC_NONE)
- wait_on_page_writeback(page);
-
- if (PageWriteback(page) ||
- !clear_page_dirty_for_io(page)) {
- unlock_page(page);
- continue;
- }
-
- if (writepage) {
- ret = (*writepage)(page, wbc);
- mapping_set_error(mapping, ret);
- } else {
- bio = __mpage_writepage(bio, page, get_block,
- &last_block_in_bio, &ret, wbc,
- page->mapping->a_ops->writepage);
- }
- if (unlikely(ret == AOP_WRITEPAGE_ACTIVATE))
- unlock_page(page);
- if (ret || (--(wbc->nr_to_write) <= 0))
- done = 1;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- done = 1;
- }
- }
- pagevec_release(&pvec);
- cond_resched();
- }
- if (!scanned && !done) {
- /*
- * We hit the last page and there is more work to be done: wrap
- * back to the start of the file
- */
- scanned = 1;
- index = 0;
- goto retry;
- }
- if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
- mapping->writeback_index = index;
- if (bio)
- mpage_bio_submit(WRITE, bio);
return ret;
}
EXPORT_SYMBOL(mpage_writepages);
@@ -804,15 +720,15 @@
int mpage_writepage(struct page *page, get_block_t get_block,
struct writeback_control *wbc)
{
- int ret = 0;
- struct bio *bio;
- sector_t last_block_in_bio = 0;
-
- bio = __mpage_writepage(NULL, page, get_block,
- &last_block_in_bio, &ret, wbc, NULL);
- if (bio)
- mpage_bio_submit(WRITE, bio);
-
+ struct mpage_data mpd = {
+ .bio = NULL,
+ .last_block_in_bio = 0,
+ .get_block = get_block,
+ .use_writepage = 0,
+ };
+ int ret = __mpage_writepage(page, wbc, &mpd);
+ if (mpd.bio)
+ mpage_bio_submit(WRITE, mpd.bio);
return ret;
}
EXPORT_SYMBOL(mpage_writepage);
diff --git a/fs/namei.c b/fs/namei.c
index b3780e3..5e2d98d 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1719,7 +1719,7 @@
* It already exists.
*/
mutex_unlock(&dir->d_inode->i_mutex);
- audit_inode_update(path.dentry->d_inode);
+ audit_inode(pathname, path.dentry->d_inode);
error = -EEXIST;
if (flag & O_EXCL)
diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c
index 629e7ab..6e5c253 100644
--- a/fs/ntfs/aops.c
+++ b/fs/ntfs/aops.c
@@ -86,19 +86,15 @@
}
/* Check for the current buffer head overflowing. */
if (unlikely(file_ofs + bh->b_size > init_size)) {
- u8 *kaddr;
int ofs;
ofs = 0;
if (file_ofs < init_size)
ofs = init_size - file_ofs;
local_irq_save(flags);
- kaddr = kmap_atomic(page, KM_BIO_SRC_IRQ);
- memset(kaddr + bh_offset(bh) + ofs, 0,
- bh->b_size - ofs);
- kunmap_atomic(kaddr, KM_BIO_SRC_IRQ);
+ zero_user_page(page, bh_offset(bh) + ofs,
+ bh->b_size - ofs, KM_BIO_SRC_IRQ);
local_irq_restore(flags);
- flush_dcache_page(page);
}
} else {
clear_buffer_uptodate(bh);
@@ -245,8 +241,7 @@
rl = NULL;
nr = i = 0;
do {
- u8 *kaddr;
- int err;
+ int err = 0;
if (unlikely(buffer_uptodate(bh)))
continue;
@@ -254,7 +249,6 @@
arr[nr++] = bh;
continue;
}
- err = 0;
bh->b_bdev = vol->sb->s_bdev;
/* Is the block within the allowed limits? */
if (iblock < lblock) {
@@ -340,10 +334,7 @@
bh->b_blocknr = -1UL;
clear_buffer_mapped(bh);
handle_zblock:
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + i * blocksize, 0, blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, i * blocksize, blocksize, KM_USER0);
if (likely(!err))
set_buffer_uptodate(bh);
} while (i++, iblock++, (bh = bh->b_this_page) != head);
@@ -460,10 +451,7 @@
* ok to ignore the compressed flag here.
*/
if (unlikely(page->index > 0)) {
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr, 0, PAGE_CACHE_SIZE);
- flush_dcache_page(page);
- kunmap_atomic(kaddr, KM_USER0);
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
goto done;
}
if (!NInoAttr(ni))
@@ -790,14 +778,10 @@
* uptodate so it can get discarded by the VM.
*/
if (err == -ENOENT || lcn == LCN_ENOENT) {
- u8 *kaddr;
-
bh->b_blocknr = -1;
clear_buffer_dirty(bh);
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh), 0, blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh), blocksize,
+ KM_USER0);
set_buffer_uptodate(bh);
err = 0;
continue;
@@ -1422,10 +1406,8 @@
if (page->index >= (i_size >> PAGE_CACHE_SHIFT)) {
/* The page straddles i_size. */
unsigned int ofs = i_size & ~PAGE_CACHE_MASK;
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + ofs, 0, PAGE_CACHE_SIZE - ofs);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, ofs, PAGE_CACHE_SIZE - ofs,
+ KM_USER0);
}
/* Handle mst protected attributes. */
if (NInoMstProtected(ni))
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index 621de36..39a1669 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -606,11 +606,8 @@
ntfs_submit_bh_for_read(bh);
*wait_bh++ = bh;
} else {
- u8 *kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh), 0,
- blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh),
+ blocksize, KM_USER0);
set_buffer_uptodate(bh);
}
}
@@ -685,12 +682,9 @@
ntfs_submit_bh_for_read(bh);
*wait_bh++ = bh;
} else {
- u8 *kaddr = kmap_atomic(page,
- KM_USER0);
- memset(kaddr + bh_offset(bh),
- 0, blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page,
+ bh_offset(bh),
+ blocksize, KM_USER0);
set_buffer_uptodate(bh);
}
}
@@ -708,11 +702,8 @@
*/
if (bh_end <= pos || bh_pos >= end) {
if (!buffer_uptodate(bh)) {
- u8 *kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh), 0,
- blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh),
+ blocksize, KM_USER0);
set_buffer_uptodate(bh);
}
mark_buffer_dirty(bh);
@@ -751,10 +742,8 @@
if (!buffer_uptodate(bh))
set_buffer_uptodate(bh);
} else if (!buffer_uptodate(bh)) {
- u8 *kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh), 0, blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh), blocksize,
+ KM_USER0);
set_buffer_uptodate(bh);
}
continue;
@@ -878,11 +867,8 @@
if (!buffer_uptodate(bh))
set_buffer_uptodate(bh);
} else if (!buffer_uptodate(bh)) {
- u8 *kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh), 0,
- blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh),
+ blocksize, KM_USER0);
set_buffer_uptodate(bh);
}
continue;
@@ -1137,16 +1123,12 @@
* to zero the overflowing region.
*/
if (unlikely(bh_pos + blocksize > initialized_size)) {
- u8 *kaddr;
int ofs = 0;
if (likely(bh_pos < initialized_size))
ofs = initialized_size - bh_pos;
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh) + ofs, 0,
- blocksize - ofs);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh) + ofs,
+ blocksize - ofs, KM_USER0);
}
} else /* if (unlikely(!buffer_uptodate(bh))) */
err = -EIO;
@@ -1286,11 +1268,8 @@
if (PageUptodate(page))
set_buffer_uptodate(bh);
else {
- u8 *kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + bh_offset(bh), 0,
- blocksize);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page);
+ zero_user_page(page, bh_offset(bh),
+ blocksize, KM_USER0);
set_buffer_uptodate(bh);
}
}
@@ -1350,9 +1329,7 @@
len = PAGE_CACHE_SIZE;
if (len > bytes)
len = bytes;
- kaddr = kmap_atomic(*pages, KM_USER0);
- memset(kaddr, 0, len);
- kunmap_atomic(kaddr, KM_USER0);
+ zero_user_page(*pages, 0, len, KM_USER0);
}
goto out;
}
@@ -1473,9 +1450,7 @@
len = PAGE_CACHE_SIZE;
if (len > bytes)
len = bytes;
- kaddr = kmap_atomic(*pages, KM_USER0);
- memset(kaddr, 0, len);
- kunmap_atomic(kaddr, KM_USER0);
+ zero_user_page(*pages, 0, len, KM_USER0);
}
goto out;
}
diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c
index 2e975c0..a93620c 100644
--- a/fs/ocfs2/cluster/masklog.c
+++ b/fs/ocfs2/cluster/masklog.c
@@ -144,7 +144,8 @@
};
static struct kset mlog_kset = {
- .kobj = {.name = "logmask", .ktype = &mlog_ktype},
+ .kobj = {.name = "logmask"},
+ .ktype = &mlog_ktype
};
int mlog_sys_init(struct kset *o2cb_subsys)
@@ -157,7 +158,7 @@
}
mlog_attr_ptrs[i] = NULL;
- kobj_set_kset_s(&mlog_kset, o2cb_subsys);
+ kobj_set_kset_s(&mlog_kset, *o2cb_subsys);
return kset_register(&mlog_kset);
}
diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig
index 0120704..7638a1c 100644
--- a/fs/partitions/Kconfig
+++ b/fs/partitions/Kconfig
@@ -239,7 +239,7 @@
config SYSV68_PARTITION
bool "SYSV68 partition table support" if PARTITION_ADVANCED
- default y if M68K
+ default y if VME
help
Say Y here if you would like to be able to read the hard disk
partition table format used by Motorola Delta machines (using
diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index 1bea610..e7b0700 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -152,7 +152,7 @@
}
static inline int
-pmbr_part_valid(struct partition *part, u64 lastlba)
+pmbr_part_valid(struct partition *part)
{
if (part->sys_ind == EFI_PMBR_OSTYPE_EFI_GPT &&
le32_to_cpu(part->start_sect) == 1UL)
@@ -163,7 +163,6 @@
/**
* is_pmbr_valid(): test Protective MBR for validity
* @mbr: pointer to a legacy mbr structure
- * @lastlba: last_lba for the whole device
*
* Description: Returns 1 if PMBR is valid, 0 otherwise.
* Validity depends on two things:
@@ -171,13 +170,13 @@
* 2) One partition of type 0xEE is found
*/
static int
-is_pmbr_valid(legacy_mbr *mbr, u64 lastlba)
+is_pmbr_valid(legacy_mbr *mbr)
{
int i;
if (!mbr || le16_to_cpu(mbr->signature) != MSDOS_MBR_SIGNATURE)
return 0;
for (i = 0; i < 4; i++)
- if (pmbr_part_valid(&mbr->partition_record[i], lastlba))
+ if (pmbr_part_valid(&mbr->partition_record[i]))
return 1;
return 0;
}
@@ -516,7 +515,7 @@
int good_pgpt = 0, good_agpt = 0, good_pmbr = 0;
gpt_header *pgpt = NULL, *agpt = NULL;
gpt_entry *pptes = NULL, *aptes = NULL;
- legacy_mbr *legacymbr = NULL;
+ legacy_mbr *legacymbr;
u64 lastlba;
if (!bdev || !gpt || !ptes)
return 0;
@@ -528,9 +527,8 @@
if (legacymbr) {
read_lba(bdev, 0, (u8 *) legacymbr,
sizeof (*legacymbr));
- good_pmbr = is_pmbr_valid(legacymbr, lastlba);
+ good_pmbr = is_pmbr_valid(legacymbr);
kfree(legacymbr);
- legacymbr=NULL;
}
if (!good_pmbr)
goto fail;
diff --git a/fs/signalfd.c b/fs/signalfd.c
new file mode 100644
index 0000000..7cfeab4
--- /dev/null
+++ b/fs/signalfd.c
@@ -0,0 +1,349 @@
+/*
+ * fs/signalfd.c
+ *
+ * Copyright (C) 2003 Linus Torvalds
+ *
+ * Mon Mar 5, 2007: Davide Libenzi <davidel@xmailserver.org>
+ * Changed ->read() to return a siginfo strcture instead of signal number.
+ * Fixed locking in ->poll().
+ * Added sighand-detach notification.
+ * Added fd re-use in sys_signalfd() syscall.
+ * Now using anonymous inode source.
+ * Thanks to Oleg Nesterov for useful code review and suggestions.
+ * More comments and suggestions from Arnd Bergmann.
+ */
+
+#include <linux/file.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/list.h>
+#include <linux/anon_inodes.h>
+#include <linux/signalfd.h>
+
+struct signalfd_ctx {
+ struct list_head lnk;
+ wait_queue_head_t wqh;
+ sigset_t sigmask;
+ struct task_struct *tsk;
+};
+
+struct signalfd_lockctx {
+ struct task_struct *tsk;
+ unsigned long flags;
+};
+
+/*
+ * Tries to acquire the sighand lock. We do not increment the sighand
+ * use count, and we do not even pin the task struct, so we need to
+ * do it inside an RCU read lock, and we must be prepared for the
+ * ctx->tsk going to NULL (in signalfd_deliver()), and for the sighand
+ * being detached. We return 0 if the sighand has been detached, or
+ * 1 if we were able to pin the sighand lock.
+ */
+static int signalfd_lock(struct signalfd_ctx *ctx, struct signalfd_lockctx *lk)
+{
+ struct sighand_struct *sighand = NULL;
+
+ rcu_read_lock();
+ lk->tsk = rcu_dereference(ctx->tsk);
+ if (likely(lk->tsk != NULL))
+ sighand = lock_task_sighand(lk->tsk, &lk->flags);
+ rcu_read_unlock();
+
+ if (sighand && !ctx->tsk) {
+ unlock_task_sighand(lk->tsk, &lk->flags);
+ sighand = NULL;
+ }
+
+ return sighand != NULL;
+}
+
+static void signalfd_unlock(struct signalfd_lockctx *lk)
+{
+ unlock_task_sighand(lk->tsk, &lk->flags);
+}
+
+/*
+ * This must be called with the sighand lock held.
+ */
+void signalfd_deliver(struct task_struct *tsk, int sig)
+{
+ struct sighand_struct *sighand = tsk->sighand;
+ struct signalfd_ctx *ctx, *tmp;
+
+ BUG_ON(!sig);
+ list_for_each_entry_safe(ctx, tmp, &sighand->signalfd_list, lnk) {
+ /*
+ * We use a negative signal value as a way to broadcast that the
+ * sighand has been orphaned, so that we can notify all the
+ * listeners about this. Remember the ctx->sigmask is inverted,
+ * so if the user is interested in a signal, that corresponding
+ * bit will be zero.
+ */
+ if (sig < 0) {
+ if (ctx->tsk == tsk) {
+ ctx->tsk = NULL;
+ list_del_init(&ctx->lnk);
+ wake_up(&ctx->wqh);
+ }
+ } else {
+ if (!sigismember(&ctx->sigmask, sig))
+ wake_up(&ctx->wqh);
+ }
+ }
+}
+
+static void signalfd_cleanup(struct signalfd_ctx *ctx)
+{
+ struct signalfd_lockctx lk;
+
+ /*
+ * This is tricky. If the sighand is gone, we do not need to remove
+ * context from the list, the list itself won't be there anymore.
+ */
+ if (signalfd_lock(ctx, &lk)) {
+ list_del(&ctx->lnk);
+ signalfd_unlock(&lk);
+ }
+ kfree(ctx);
+}
+
+static int signalfd_release(struct inode *inode, struct file *file)
+{
+ signalfd_cleanup(file->private_data);
+ return 0;
+}
+
+static unsigned int signalfd_poll(struct file *file, poll_table *wait)
+{
+ struct signalfd_ctx *ctx = file->private_data;
+ unsigned int events = 0;
+ struct signalfd_lockctx lk;
+
+ poll_wait(file, &ctx->wqh, wait);
+
+ /*
+ * Let the caller get a POLLIN in this case, ala socket recv() when
+ * the peer disconnects.
+ */
+ if (signalfd_lock(ctx, &lk)) {
+ if (next_signal(&lk.tsk->pending, &ctx->sigmask) > 0 ||
+ next_signal(&lk.tsk->signal->shared_pending,
+ &ctx->sigmask) > 0)
+ events |= POLLIN;
+ signalfd_unlock(&lk);
+ } else
+ events |= POLLIN;
+
+ return events;
+}
+
+/*
+ * Copied from copy_siginfo_to_user() in kernel/signal.c
+ */
+static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
+ siginfo_t const *kinfo)
+{
+ long err;
+
+ BUILD_BUG_ON(sizeof(struct signalfd_siginfo) != 128);
+
+ /*
+ * Unused memebers should be zero ...
+ */
+ err = __clear_user(uinfo, sizeof(*uinfo));
+
+ /*
+ * If you change siginfo_t structure, please be sure
+ * this code is fixed accordingly.
+ */
+ err |= __put_user(kinfo->si_signo, &uinfo->signo);
+ err |= __put_user(kinfo->si_errno, &uinfo->err);
+ err |= __put_user((short)kinfo->si_code, &uinfo->code);
+ switch (kinfo->si_code & __SI_MASK) {
+ case __SI_KILL:
+ err |= __put_user(kinfo->si_pid, &uinfo->pid);
+ err |= __put_user(kinfo->si_uid, &uinfo->uid);
+ break;
+ case __SI_TIMER:
+ err |= __put_user(kinfo->si_tid, &uinfo->tid);
+ err |= __put_user(kinfo->si_overrun, &uinfo->overrun);
+ err |= __put_user((long)kinfo->si_ptr, &uinfo->svptr);
+ break;
+ case __SI_POLL:
+ err |= __put_user(kinfo->si_band, &uinfo->band);
+ err |= __put_user(kinfo->si_fd, &uinfo->fd);
+ break;
+ case __SI_FAULT:
+ err |= __put_user((long)kinfo->si_addr, &uinfo->addr);
+#ifdef __ARCH_SI_TRAPNO
+ err |= __put_user(kinfo->si_trapno, &uinfo->trapno);
+#endif
+ break;
+ case __SI_CHLD:
+ err |= __put_user(kinfo->si_pid, &uinfo->pid);
+ err |= __put_user(kinfo->si_uid, &uinfo->uid);
+ err |= __put_user(kinfo->si_status, &uinfo->status);
+ err |= __put_user(kinfo->si_utime, &uinfo->utime);
+ err |= __put_user(kinfo->si_stime, &uinfo->stime);
+ break;
+ case __SI_RT: /* This is not generated by the kernel as of now. */
+ case __SI_MESGQ: /* But this is */
+ err |= __put_user(kinfo->si_pid, &uinfo->pid);
+ err |= __put_user(kinfo->si_uid, &uinfo->uid);
+ err |= __put_user((long)kinfo->si_ptr, &uinfo->svptr);
+ break;
+ default: /* this is just in case for now ... */
+ err |= __put_user(kinfo->si_pid, &uinfo->pid);
+ err |= __put_user(kinfo->si_uid, &uinfo->uid);
+ break;
+ }
+
+ return err ? -EFAULT: sizeof(*uinfo);
+}
+
+/*
+ * Returns either the size of a "struct signalfd_siginfo", or zero if the
+ * sighand we are attached to, has been orphaned. The "count" parameter
+ * must be at least the size of a "struct signalfd_siginfo".
+ */
+static ssize_t signalfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct signalfd_ctx *ctx = file->private_data;
+ ssize_t res = 0;
+ int locked, signo;
+ siginfo_t info;
+ struct signalfd_lockctx lk;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count < sizeof(struct signalfd_siginfo))
+ return -EINVAL;
+ locked = signalfd_lock(ctx, &lk);
+ if (!locked)
+ return 0;
+ res = -EAGAIN;
+ signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info);
+ if (signo == 0 && !(file->f_flags & O_NONBLOCK)) {
+ add_wait_queue(&ctx->wqh, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info);
+ if (signo != 0)
+ break;
+ if (signal_pending(current)) {
+ res = -ERESTARTSYS;
+ break;
+ }
+ signalfd_unlock(&lk);
+ schedule();
+ locked = signalfd_lock(ctx, &lk);
+ if (unlikely(!locked)) {
+ /*
+ * Let the caller read zero byte, ala socket
+ * recv() when the peer disconnect. This test
+ * must be done before doing a dequeue_signal(),
+ * because if the sighand has been orphaned,
+ * the dequeue_signal() call is going to crash.
+ */
+ res = 0;
+ break;
+ }
+ }
+ remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+ }
+ if (likely(locked))
+ signalfd_unlock(&lk);
+ if (likely(signo))
+ res = signalfd_copyinfo((struct signalfd_siginfo __user *) buf,
+ &info);
+
+ return res;
+}
+
+static const struct file_operations signalfd_fops = {
+ .release = signalfd_release,
+ .poll = signalfd_poll,
+ .read = signalfd_read,
+};
+
+/*
+ * Create a file descriptor that is associated with our signal
+ * state. We can pass it around to others if we want to, but
+ * it will always be _our_ signal state.
+ */
+asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask)
+{
+ int error;
+ sigset_t sigmask;
+ struct signalfd_ctx *ctx;
+ struct sighand_struct *sighand;
+ struct file *file;
+ struct inode *inode;
+ struct signalfd_lockctx lk;
+
+ if (sizemask != sizeof(sigset_t) ||
+ copy_from_user(&sigmask, user_mask, sizeof(sigmask)))
+ return error = -EINVAL;
+ sigdelsetmask(&sigmask, sigmask(SIGKILL) | sigmask(SIGSTOP));
+ signotset(&sigmask);
+
+ if (ufd == -1) {
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ init_waitqueue_head(&ctx->wqh);
+ ctx->sigmask = sigmask;
+ ctx->tsk = current;
+
+ sighand = current->sighand;
+ /*
+ * Add this fd to the list of signal listeners.
+ */
+ spin_lock_irq(&sighand->siglock);
+ list_add_tail(&ctx->lnk, &sighand->signalfd_list);
+ spin_unlock_irq(&sighand->siglock);
+
+ /*
+ * When we call this, the initialization must be complete, since
+ * anon_inode_getfd() will install the fd.
+ */
+ error = anon_inode_getfd(&ufd, &inode, &file, "[signalfd]",
+ &signalfd_fops, ctx);
+ if (error)
+ goto err_fdalloc;
+ } else {
+ file = fget(ufd);
+ if (!file)
+ return -EBADF;
+ ctx = file->private_data;
+ if (file->f_op != &signalfd_fops) {
+ fput(file);
+ return -EINVAL;
+ }
+ /*
+ * We need to be prepared of the fact that the sighand this fd
+ * is attached to, has been detched. In that case signalfd_lock()
+ * will return 0, and we'll just skip setting the new mask.
+ */
+ if (signalfd_lock(ctx, &lk)) {
+ ctx->sigmask = sigmask;
+ signalfd_unlock(&lk);
+ }
+ wake_up(&ctx->wqh);
+ fput(file);
+ }
+
+ return ufd;
+
+err_fdalloc:
+ signalfd_cleanup(ctx);
+ return error;
+}
+
diff --git a/fs/timerfd.c b/fs/timerfd.c
new file mode 100644
index 0000000..e329e37
--- /dev/null
+++ b/fs/timerfd.c
@@ -0,0 +1,227 @@
+/*
+ * fs/timerfd.c
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ *
+ * Thanks to Thomas Gleixner for code reviews and useful comments.
+ *
+ */
+
+#include <linux/file.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/hrtimer.h>
+#include <linux/anon_inodes.h>
+#include <linux/timerfd.h>
+
+struct timerfd_ctx {
+ struct hrtimer tmr;
+ ktime_t tintv;
+ spinlock_t lock;
+ wait_queue_head_t wqh;
+ int expired;
+};
+
+/*
+ * This gets called when the timer event triggers. We set the "expired"
+ * flag, but we do not re-arm the timer (in case it's necessary,
+ * tintv.tv64 != 0) until the timer is read.
+ */
+static enum hrtimer_restart timerfd_tmrproc(struct hrtimer *htmr)
+{
+ struct timerfd_ctx *ctx = container_of(htmr, struct timerfd_ctx, tmr);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctx->lock, flags);
+ ctx->expired = 1;
+ wake_up_locked(&ctx->wqh);
+ spin_unlock_irqrestore(&ctx->lock, flags);
+
+ return HRTIMER_NORESTART;
+}
+
+static void timerfd_setup(struct timerfd_ctx *ctx, int clockid, int flags,
+ const struct itimerspec *ktmr)
+{
+ enum hrtimer_mode htmode;
+ ktime_t texp;
+
+ htmode = (flags & TFD_TIMER_ABSTIME) ?
+ HRTIMER_MODE_ABS: HRTIMER_MODE_REL;
+
+ texp = timespec_to_ktime(ktmr->it_value);
+ ctx->expired = 0;
+ ctx->tintv = timespec_to_ktime(ktmr->it_interval);
+ hrtimer_init(&ctx->tmr, clockid, htmode);
+ ctx->tmr.expires = texp;
+ ctx->tmr.function = timerfd_tmrproc;
+ if (texp.tv64 != 0)
+ hrtimer_start(&ctx->tmr, texp, htmode);
+}
+
+static int timerfd_release(struct inode *inode, struct file *file)
+{
+ struct timerfd_ctx *ctx = file->private_data;
+
+ hrtimer_cancel(&ctx->tmr);
+ kfree(ctx);
+ return 0;
+}
+
+static unsigned int timerfd_poll(struct file *file, poll_table *wait)
+{
+ struct timerfd_ctx *ctx = file->private_data;
+ unsigned int events = 0;
+ unsigned long flags;
+
+ poll_wait(file, &ctx->wqh, wait);
+
+ spin_lock_irqsave(&ctx->lock, flags);
+ if (ctx->expired)
+ events |= POLLIN;
+ spin_unlock_irqrestore(&ctx->lock, flags);
+
+ return events;
+}
+
+static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct timerfd_ctx *ctx = file->private_data;
+ ssize_t res;
+ u32 ticks = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (count < sizeof(ticks))
+ return -EINVAL;
+ spin_lock_irq(&ctx->lock);
+ res = -EAGAIN;
+ if (!ctx->expired && !(file->f_flags & O_NONBLOCK)) {
+ __add_wait_queue(&ctx->wqh, &wait);
+ for (res = 0;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ctx->expired) {
+ res = 0;
+ break;
+ }
+ if (signal_pending(current)) {
+ res = -ERESTARTSYS;
+ break;
+ }
+ spin_unlock_irq(&ctx->lock);
+ schedule();
+ spin_lock_irq(&ctx->lock);
+ }
+ __remove_wait_queue(&ctx->wqh, &wait);
+ __set_current_state(TASK_RUNNING);
+ }
+ if (ctx->expired) {
+ ctx->expired = 0;
+ if (ctx->tintv.tv64 != 0) {
+ /*
+ * If tintv.tv64 != 0, this is a periodic timer that
+ * needs to be re-armed. We avoid doing it in the timer
+ * callback to avoid DoS attacks specifying a very
+ * short timer period.
+ */
+ ticks = (u32)
+ hrtimer_forward(&ctx->tmr,
+ hrtimer_cb_get_time(&ctx->tmr),
+ ctx->tintv);
+ hrtimer_restart(&ctx->tmr);
+ } else
+ ticks = 1;
+ }
+ spin_unlock_irq(&ctx->lock);
+ if (ticks)
+ res = put_user(ticks, buf) ? -EFAULT: sizeof(ticks);
+ return res;
+}
+
+static const struct file_operations timerfd_fops = {
+ .release = timerfd_release,
+ .poll = timerfd_poll,
+ .read = timerfd_read,
+};
+
+asmlinkage long sys_timerfd(int ufd, int clockid, int flags,
+ const struct itimerspec __user *utmr)
+{
+ int error;
+ struct timerfd_ctx *ctx;
+ struct file *file;
+ struct inode *inode;
+ struct itimerspec ktmr;
+
+ if (copy_from_user(&ktmr, utmr, sizeof(ktmr)))
+ return -EFAULT;
+
+ if (clockid != CLOCK_MONOTONIC &&
+ clockid != CLOCK_REALTIME)
+ return -EINVAL;
+ if (!timespec_valid(&ktmr.it_value) ||
+ !timespec_valid(&ktmr.it_interval))
+ return -EINVAL;
+
+ if (ufd == -1) {
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ init_waitqueue_head(&ctx->wqh);
+ spin_lock_init(&ctx->lock);
+
+ timerfd_setup(ctx, clockid, flags, &ktmr);
+
+ /*
+ * When we call this, the initialization must be complete, since
+ * anon_inode_getfd() will install the fd.
+ */
+ error = anon_inode_getfd(&ufd, &inode, &file, "[timerfd]",
+ &timerfd_fops, ctx);
+ if (error)
+ goto err_tmrcancel;
+ } else {
+ file = fget(ufd);
+ if (!file)
+ return -EBADF;
+ ctx = file->private_data;
+ if (file->f_op != &timerfd_fops) {
+ fput(file);
+ return -EINVAL;
+ }
+ /*
+ * We need to stop the existing timer before reprogramming
+ * it to the new values.
+ */
+ for (;;) {
+ spin_lock_irq(&ctx->lock);
+ if (hrtimer_try_to_cancel(&ctx->tmr) >= 0)
+ break;
+ spin_unlock_irq(&ctx->lock);
+ cpu_relax();
+ }
+ /*
+ * Re-program the timer to the new value ...
+ */
+ timerfd_setup(ctx, clockid, flags, &ktmr);
+
+ spin_unlock_irq(&ctx->lock);
+ fput(file);
+ }
+
+ return ufd;
+
+err_tmrcancel:
+ hrtimer_cancel(&ctx->tmr);
+ kfree(ctx);
+ return error;
+}
+
diff --git a/fs/xattr.c b/fs/xattr.c
index 9f4568b..4523aca 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -350,6 +350,7 @@
f = fget(fd);
if (!f)
return error;
+ audit_inode(NULL, f->f_path.dentry->d_inode);
error = getxattr(f->f_path.dentry, name, value, size);
fput(f);
return error;
@@ -422,6 +423,7 @@
f = fget(fd);
if (!f)
return error;
+ audit_inode(NULL, f->f_path.dentry->d_inode);
error = listxattr(f->f_path.dentry, list, size);
fput(f);
return error;
diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h
index cb8d286..7f690bb 100644
--- a/include/acpi/acdispat.h
+++ b/include/acpi/acdispat.h
@@ -290,12 +290,9 @@
acpi_status
acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state *walk_state);
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
- union acpi_parse_object
- *origin,
- union acpi_operand_object
- *mth_desc,
- struct acpi_thread_state
+struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
+ *origin, union acpi_operand_object
+ *mth_desc, struct acpi_thread_state
*thread);
acpi_status
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
index 24c3f05..347a911 100644
--- a/include/acpi/acglobal.h
+++ b/include/acpi/acglobal.h
@@ -319,7 +319,7 @@
acpi_gbl_fixed_event_handlers[ACPI_NUM_FIXED_EVENTS];
ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
ACPI_EXTERN struct acpi_gpe_block_info
- *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
+*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
/*****************************************************************************
*
diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h
index 4409830..ce7c9d6 100644
--- a/include/acpi/acinterp.h
+++ b/include/acpi/acinterp.h
@@ -253,8 +253,7 @@
void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread);
-void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc,
- struct acpi_thread_state *thread);
+void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc);
/*
* exprep - ACPI AML execution - prep utilities
@@ -446,10 +445,14 @@
/*
* exutils - interpreter/scanner utilities
*/
-acpi_status acpi_ex_enter_interpreter(void);
+void acpi_ex_enter_interpreter(void);
void acpi_ex_exit_interpreter(void);
+void acpi_ex_reacquire_interpreter(void);
+
+void acpi_ex_relinquish_interpreter(void);
+
void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc);
u8 acpi_ex_acquire_global_lock(u32 rule);
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
index 6f83ddb..202cd42 100644
--- a/include/acpi/aclocal.h
+++ b/include/acpi/aclocal.h
@@ -630,7 +630,7 @@
* and bytelists.
*/
struct acpi_parse_obj_named {
- ACPI_PARSE_COMMON u8 * path;
+ ACPI_PARSE_COMMON u8 *path;
u8 *data; /* AML body or bytelist data */
u32 length; /* AML length */
u32 name; /* 4-byte name or zero if no name */
diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h
index 535b7e1..5ef38a6 100644
--- a/include/acpi/acnamesp.h
+++ b/include/acpi/acnamesp.h
@@ -100,10 +100,8 @@
acpi_walk_callback user_function,
void *context, void **return_value);
-struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type,
- struct acpi_namespace_node
- *parent,
- struct acpi_namespace_node
+struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct acpi_namespace_node
+ *parent, struct acpi_namespace_node
*child);
/*
diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h
index 5206d61..7e1211a 100644
--- a/include/acpi/acobject.h
+++ b/include/acpi/acobject.h
@@ -155,7 +155,7 @@
struct acpi_object_mutex {
ACPI_OBJECT_COMMON_HEADER u8 sync_level; /* 0-15, specified in Mutex() call */
u16 acquisition_depth; /* Allow multiple Acquires, same thread */
- acpi_thread_id owner_thread_id; /* Current owner of the mutex */
+ struct acpi_thread_state *owner_thread; /* Current owner of the mutex */
acpi_mutex os_mutex; /* Actual OS synchronization object */
union acpi_operand_object *prev; /* Link for list of acquired mutexes */
union acpi_operand_object *next; /* Link for list of acquired mutexes */
@@ -216,7 +216,7 @@
/* The next two fields take advantage of the 3-byte space before NOTIFY_INFO */
u8 proc_id;
u8 length;
- ACPI_COMMON_NOTIFY_INFO acpi_io_address address;
+ ACPI_COMMON_NOTIFY_INFO acpi_io_address address;
};
struct acpi_object_thermal_zone {
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 9cfd5b1..c6fa5e0 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -91,7 +91,8 @@
typedef int (*acpi_op_lock) (struct acpi_device * device, int type);
typedef int (*acpi_op_start) (struct acpi_device * device);
typedef int (*acpi_op_stop) (struct acpi_device * device, int type);
-typedef int (*acpi_op_suspend) (struct acpi_device * device, pm_message_t state);
+typedef int (*acpi_op_suspend) (struct acpi_device * device,
+ pm_message_t state);
typedef int (*acpi_op_resume) (struct acpi_device * device);
typedef int (*acpi_op_scan) (struct acpi_device * device);
typedef int (*acpi_op_bind) (struct acpi_device * device);
@@ -296,7 +297,7 @@
void *driver_data;
struct device dev;
struct acpi_bus_ops bus_ops; /* workaround for different code path for hotplug */
- enum acpi_bus_removal_type removal_type; /* indicate for different removal type */
+ enum acpi_bus_removal_type removal_type; /* indicate for different removal type */
};
#define acpi_driver_data(d) ((d)->driver_data)
@@ -338,7 +339,7 @@
acpi_handle handle, int type);
int acpi_bus_trim(struct acpi_device *start, int rmdevice);
int acpi_bus_start(struct acpi_device *device);
-acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd);
+acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle * ejd);
int acpi_match_ids(struct acpi_device *device, char *ids);
int acpi_create_dir(struct acpi_device *);
void acpi_remove_dir(struct acpi_device *);
@@ -363,6 +364,6 @@
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
-#endif /* CONFIG_ACPI */
+#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index f6275b0..5535159 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -113,7 +113,8 @@
extern int register_dock_notifier(struct notifier_block *nb);
extern void unregister_dock_notifier(struct notifier_block *nb);
extern int register_hotplug_dock_device(acpi_handle handle,
- acpi_notify_handler handler, void *context);
+ acpi_notify_handler handler,
+ void *context);
extern void unregister_hotplug_dock_device(acpi_handle handle);
#else
static inline int is_dock_device(acpi_handle handle)
@@ -128,7 +129,8 @@
{
}
static inline int register_hotplug_dock_device(acpi_handle handle,
- acpi_notify_handler handler, void *context)
+ acpi_notify_handler handler,
+ void *context)
{
return -ENODEV;
}
diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h
index 1049f2a..f9d2bde 100644
--- a/include/acpi/acpi_numa.h
+++ b/include/acpi/acpi_numa.h
@@ -8,7 +8,7 @@
#if MAX_NUMNODES > 256
#define MAX_PXM_DOMAINS MAX_NUMNODES
#else
-#define MAX_PXM_DOMAINS (256) /* Old pxm spec is defined 8 bit */
+#define MAX_PXM_DOMAINS (256) /* Old pxm spec is defined 8 bit */
#endif
extern int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS];
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 2785058..5e07db0 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -143,7 +143,8 @@
*/
void *acpi_os_allocate(acpi_size size);
-void __iomem *acpi_os_map_memory(acpi_physical_address where, acpi_native_uint length);
+void __iomem *acpi_os_map_memory(acpi_physical_address where,
+ acpi_native_uint length);
void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size);
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 56bf492..fe8abc2 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -344,7 +344,7 @@
/* 64-bit integers */
-typedef unsigned long long acpi_integer;
+typedef unsigned long long acpi_integer;
#define ACPI_INTEGER_MAX ACPI_UINT64_MAX
#define ACPI_INTEGER_BIT_SIZE 64
#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
index 883ffe9..15a8388 100644
--- a/include/acpi/acutils.h
+++ b/include/acpi/acutils.h
@@ -498,7 +498,8 @@
acpi_status
acpi_ut_walk_aml_resources(u8 * aml,
acpi_size aml_length,
- acpi_walk_aml_callback user_function, void **context);
+ acpi_walk_aml_callback user_function,
+ void **context);
acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index);
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 5f532d2..a568717 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -103,7 +103,10 @@
#define acpi_thread_id struct task_struct *
-static inline acpi_thread_id acpi_os_get_thread_id(void) { return current; }
+static inline acpi_thread_id acpi_os_get_thread_id(void)
+{
+ return current;
+}
/*
* The irqs_disabled() check is for resume from RAM.
@@ -112,15 +115,19 @@
* to quiet __might_sleep() in kmalloc() and resume does not.
*/
#include <acpi/actypes.h>
-static inline void *acpi_os_allocate(acpi_size size) {
- return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+static inline void *acpi_os_allocate(acpi_size size)
+{
+ return kmalloc(size, irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
}
-static inline void *acpi_os_allocate_zeroed(acpi_size size) {
- return kzalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+static inline void *acpi_os_allocate_zeroed(acpi_size size)
+{
+ return kzalloc(size, irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
}
-static inline void *acpi_os_acquire_object(acpi_cache_t * cache) {
- return kmem_cache_zalloc(cache, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+static inline void *acpi_os_acquire_object(acpi_cache_t * cache)
+{
+ return kmem_cache_zalloc(cache,
+ irqs_disabled()? GFP_ATOMIC : GFP_KERNEL);
}
#define ACPI_ALLOCATE(a) acpi_os_allocate(a)
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 916c010..b4b0ffd 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -18,7 +18,7 @@
#define ACPI_PDC_REVISION_ID 0x1
-#define ACPI_PSD_REV0_REVISION 0 /* Support for _PSD as in ACPI 3.0 */
+#define ACPI_PSD_REV0_REVISION 0 /* Support for _PSD as in ACPI 3.0 */
#define ACPI_PSD_REV0_ENTRIES 5
/*
@@ -189,8 +189,9 @@
} piix4;
};
-extern int acpi_processor_preregister_performance(
- struct acpi_processor_performance **performance);
+extern int acpi_processor_preregister_performance(struct
+ acpi_processor_performance
+ **performance);
extern int acpi_processor_register_performance(struct acpi_processor_performance
*performance, unsigned int cpu);
@@ -213,7 +214,8 @@
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
unsigned int cpu);
int acpi_processor_ffh_cstate_probe(unsigned int cpu,
- struct acpi_processor_cx *cx, struct acpi_power_register *reg);
+ struct acpi_processor_cx *cx,
+ struct acpi_power_register *reg);
void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cstate);
#else
static inline void acpi_processor_power_init_bm_check(struct
@@ -224,12 +226,14 @@
return;
}
static inline int acpi_processor_ffh_cstate_probe(unsigned int cpu,
- struct acpi_processor_cx *cx, struct acpi_power_register *reg)
+ struct acpi_processor_cx *cx,
+ struct acpi_power_register
+ *reg)
{
return -1;
}
-static inline void acpi_processor_ffh_cstate_enter(
- struct acpi_processor_cx *cstate)
+static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
+ *cstate)
{
return;
}
diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h
index 0bd7bd2..6a5be1f 100644
--- a/include/asm-alpha/mmu_context.h
+++ b/include/asm-alpha/mmu_context.h
@@ -85,8 +85,8 @@
* +-------------+----------------+--------------+
*/
-#ifdef CONFIG_SMP
#include <asm/smp.h>
+#ifdef CONFIG_SMP
#define cpu_last_asn(cpuid) (cpu_data[cpuid].last_asn)
#else
extern unsigned long last_asn;
diff --git a/include/asm-alpha/poll.h b/include/asm-alpha/poll.h
index 76f8935..c98509d 100644
--- a/include/asm-alpha/poll.h
+++ b/include/asm-alpha/poll.h
@@ -1,25 +1 @@
-#ifndef __ALPHA_POLL_H
-#define __ALPHA_POLL_H
-
-#define POLLIN (1 << 0)
-#define POLLPRI (1 << 1)
-#define POLLOUT (1 << 2)
-#define POLLERR (1 << 3)
-#define POLLHUP (1 << 4)
-#define POLLNVAL (1 << 5)
-#define POLLRDNORM (1 << 6)
-#define POLLRDBAND (1 << 7)
-#define POLLWRNORM (1 << 8)
-#define POLLWRBAND (1 << 9)
-#define POLLMSG (1 << 10)
-#define POLLREMOVE (1 << 12)
-#define POLLRDHUP (1 << 13)
-
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h
new file mode 100644
index 0000000..8a9708a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9rl.h
@@ -0,0 +1,110 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Controller */
+#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0 6 /* USART 0 */
+#define AT91SAM9RL_ID_US1 7 /* USART 1 */
+#define AT91SAM9RL_ID_US2 8 /* USART 2 */
+#define AT91SAM9RL_ID_US3 9 /* USART 3 */
+#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
+#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
+#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
+#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
+#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0 0xfffa0000
+#define AT91SAM9RL_BASE_TC0 0xfffa0000
+#define AT91SAM9RL_BASE_TC1 0xfffa0040
+#define AT91SAM9RL_BASE_TC2 0xfffa0080
+#define AT91SAM9RL_BASE_MCI 0xfffa4000
+#define AT91SAM9RL_BASE_TWI0 0xfffa8000
+#define AT91SAM9RL_BASE_TWI1 0xfffac000
+#define AT91SAM9RL_BASE_US0 0xfffb0000
+#define AT91SAM9RL_BASE_US1 0xfffb4000
+#define AT91SAM9RL_BASE_US2 0xfffb8000
+#define AT91SAM9RL_BASE_US3 0xfffbc000
+#define AT91SAM9RL_BASE_SSC0 0xfffc0000
+#define AT91SAM9RL_BASE_SSC1 0xfffc4000
+#define AT91SAM9RL_BASE_PWMC 0xfffc8000
+#define AT91SAM9RL_BASE_SPI 0xfffcc000
+#define AT91SAM9RL_BASE_TSC 0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
+#define AT91SAM9RL_BASE_AC97C 0xfffd8000
+#define AT91_BASE_SYS 0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
new file mode 100644
index 0000000..b15f11b
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9rl_matrix.h
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+
+#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 7ef4eeb..ef93c30 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -26,6 +26,8 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+
static inline unsigned long at91_cpu_identify(void)
{
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
@@ -68,6 +70,13 @@
#define cpu_is_at91sam9263() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl() (0)
+#endif
+
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 28133e0..46835e9 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -24,6 +24,8 @@
#include <asm/arch/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <asm/arch/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <asm/arch/at91sam9rl.h>
#else
#error "Unsupported AT91 processor"
#endif
@@ -69,22 +71,5 @@
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- __raw_writel(value, addr + reg_offset);
-}
-#endif
#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
index 401f327..80073fd 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -29,4 +29,22 @@
#define __mem_pci(a) (a)
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ __raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
index 1ffa3bb..1127a3b 100644
--- a/include/asm-arm/arch-at91/irqs.h
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -21,6 +21,7 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
+#include <asm/io.h>
#include <asm/arch/at91_aic.h>
#define NR_AIC_IRQS 32
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index f41636d..2df1ee1 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -37,6 +37,11 @@
#define AT91SAM9_MASTER_CLOCK 99959500
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#endif
#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
index a193d28..30ac587 100644
--- a/include/asm-arm/arch-at91/uncompress.h
+++ b/include/asm-arm/arch-at91/uncompress.h
@@ -21,7 +21,7 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
-#include <asm/hardware.h>
+#include <asm/io.h>
#include <asm/arch/at91_dbgu.h>
/*
diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S
index 0cfb89b..038b761 100644
--- a/include/asm-arm/arch-cl7500/entry-macro.S
+++ b/include/asm-arm/arch-cl7500/entry-macro.S
@@ -1,6 +1,14 @@
#include <asm/hardware.h>
#include <asm/hardware/entry-macro-iomd.S>
+
+ .equ ioc_base_high, IOC_BASE & 0xff000000
+ .equ ioc_base_low, IOC_BASE & 0x00ff0000
+
.macro get_irqnr_preamble, base, tmp
+ mov \base, #ioc_base_high @ point at IOC
+ .if ioc_base_low
+ orr \base, \base, #ioc_base_low
+ .endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/include/asm-arm/arch-davinci/common.h b/include/asm-arm/arch-davinci/common.h
new file mode 100644
index 0000000..a97dfbb
--- /dev/null
+++ b/include/asm-arm/arch-davinci/common.h
@@ -0,0 +1,19 @@
+/*
+ * Header for code common to all DaVinci machines.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
+#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
+
+struct sys_timer;
+
+extern struct sys_timer davinci_timer;
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/include/asm-arm/arch-davinci/debug-macro.S
new file mode 100644
index 0000000..e6c0f0d
--- /dev/null
+++ b/include/asm-arm/arch-davinci/debug-macro.S
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro for DaVinci
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x01000000 @ physical base address
+ movne \rx, #0xfe000000 @ virtual base
+ orr \rx, \rx, #0x00c20000 @ UART 0
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-davinci/dma.h b/include/asm-arm/arch-davinci/dma.h
new file mode 100644
index 0000000..8e2f2d0
--- /dev/null
+++ b/include/asm-arm/arch-davinci/dma.h
@@ -0,0 +1,16 @@
+/*
+ * DaVinci DMA definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS 0xffffffff
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S
new file mode 100644
index 0000000..3ebfcc5
--- /dev/null
+++ b/include/asm-arm/arch-davinci/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/arch/io.h>
+#include <asm/arch/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \tmp, [\base, #0x14]
+ mov \tmp, \tmp, lsr #2
+ sub \irqnr, \tmp, #1
+ cmp \tmp, #0
+ .endm
+
+ .macro irq_prio_table
+ .endm
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
new file mode 100644
index 0000000..60362d8
--- /dev/null
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -0,0 +1,14 @@
+/*
+ * Common hardware definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-davinci/io.h b/include/asm-arm/arch-davinci/io.h
new file mode 100644
index 0000000..e7accb9
--- /dev/null
+++ b/include/asm-arm/arch-davinci/io.h
@@ -0,0 +1,79 @@
+/*
+ * DaVinci IO address definitions
+ *
+ * Copied from include/asm/arm/arch-omap/io.h
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+#define IO_PHYS 0x01c00000
+#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE 0x00400000
+#define IO_VIRT (IO_PHYS + IO_OFFSET)
+#define io_p2v(pa) ((pa) + IO_OFFSET)
+#define io_v2p(va) ((va) - IO_OFFSET)
+#define IO_ADDRESS(x) io_p2v(x)
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define PCIO_BASE 0
+#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the DaVinci IO region
+ *
+ * NOTE: - Use davinci_read/write[bwl] for physical register addresses
+ * - Use __raw_read/write[bwl]() for virtual register addresses
+ * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ * - DO NOT use hardcoded virtual addresses to allow changing the
+ * IO address space again if needed
+ */
+#define davinci_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a))
+#define davinci_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a))
+#define davinci_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a))
+
+#define davinci_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v))
+#define davinci_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define davinci_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v))
+
+/* 16 bit uses LDRH/STRH, base +/- offset_8 */
+typedef struct { volatile u16 offset[256]; } __regbase16;
+#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \
+ ->offset[((vaddr)&0xff)>>1]
+#define __REG16(paddr) __REGV16(io_p2v(paddr))
+
+/* 8/32 bit uses LDR/STR, base +/- offset_12 */
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \
+ ->offset[((vaddr)&4095)>>0]
+#define __REG8(paddr) __REGV8(io_p2v(paddr))
+
+typedef struct { volatile u32 offset[4096]; } __regbase32;
+#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \
+ ->offset[((vaddr)&4095)>>2]
+
+#define __REG(paddr) __REGV32(io_p2v(paddr))
+#else
+
+#define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+
+#endif /* __ASSEMBLER__ */
+#endif /* __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-davinci/irqs.h b/include/asm-arm/arch-davinci/irqs.h
new file mode 100644
index 0000000..f4c5ca6
--- /dev/null
+++ b/include/asm-arm/arch-davinci/irqs.h
@@ -0,0 +1,105 @@
+/*
+ * DaVinci interrupt controller definitions
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* Base address */
+#define DAVINCI_ARM_INTC_BASE 0x01C48000
+
+/* Interrupt lines */
+#define IRQ_VDINT0 0
+#define IRQ_VDINT1 1
+#define IRQ_VDINT2 2
+#define IRQ_HISTINT 3
+#define IRQ_H3AINT 4
+#define IRQ_PRVUINT 5
+#define IRQ_RSZINT 6
+#define IRQ_VFOCINT 7
+#define IRQ_VENCINT 8
+#define IRQ_ASQINT 9
+#define IRQ_IMXINT 10
+#define IRQ_VLCDINT 11
+#define IRQ_USBINT 12
+#define IRQ_EMACINT 13
+
+#define IRQ_CCINT0 16
+#define IRQ_CCERRINT 17
+#define IRQ_TCERRINT0 18
+#define IRQ_TCERRINT 19
+#define IRQ_PSCIN 20
+
+#define IRQ_IDE 22
+#define IRQ_HPIINT 23
+#define IRQ_MBXINT 24
+#define IRQ_MBRINT 25
+#define IRQ_MMCINT 26
+#define IRQ_SDIOINT 27
+#define IRQ_MSINT 28
+#define IRQ_DDRINT 29
+#define IRQ_AEMIFINT 30
+#define IRQ_VLQINT 31
+#define IRQ_TINT0_TINT12 32
+#define IRQ_TINT0_TINT34 33
+#define IRQ_TINT1_TINT12 34
+#define IRQ_TINT1_TINT34 35
+#define IRQ_PWMINT0 36
+#define IRQ_PWMINT1 37
+#define IRQ_PWMINT2 38
+#define IRQ_I2C 39
+#define IRQ_UARTINT0 40
+#define IRQ_UARTINT1 41
+#define IRQ_UARTINT2 42
+#define IRQ_SPINT0 43
+#define IRQ_SPINT1 44
+
+#define IRQ_DSP2ARM0 46
+#define IRQ_DSP2ARM1 47
+#define IRQ_GPIO0 48
+#define IRQ_GPIO1 49
+#define IRQ_GPIO2 50
+#define IRQ_GPIO3 51
+#define IRQ_GPIO4 52
+#define IRQ_GPIO5 53
+#define IRQ_GPIO6 54
+#define IRQ_GPIO7 55
+#define IRQ_GPIOBNK0 56
+#define IRQ_GPIOBNK1 57
+#define IRQ_GPIOBNK2 58
+#define IRQ_GPIOBNK3 59
+#define IRQ_GPIOBNK4 60
+#define IRQ_COMMTX 61
+#define IRQ_COMMRX 62
+#define IRQ_EMUINT 63
+
+#define DAVINCI_N_AINTC_IRQ 64
+#define DAVINCI_N_GPIO 71
+
+#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
+
+#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-davinci/memory.h b/include/asm-arm/arch-davinci/memory.h
new file mode 100644
index 0000000..dd1625c
--- /dev/null
+++ b/include/asm-arm/arch-davinci/memory.h
@@ -0,0 +1,64 @@
+/*
+ * DaVinci memory space definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+#include <asm/page.h>
+#include <asm/sizes.h>
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+#define DAVINCI_DDR_BASE 0x80000000
+#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */
+
+#define PHYS_OFFSET DAVINCI_DDR_BASE
+
+/*
+ * Increase size of DMA-consistent memory region
+ */
+#define CONSISTENT_DMA_SIZE (14<<20)
+
+#ifndef __ASSEMBLY__
+/*
+ * Restrict DMA-able region to workaround silicon bug. The bug
+ * restricts buffers available for DMA to video hardware to be
+ * below 128M
+ */
+static inline void
+__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+ unsigned int sz = (128<<20) >> PAGE_SHIFT;
+
+ if (node != 0)
+ sz = 0;
+
+ size[1] = size[0] - sz;
+ size[0] = sz;
+}
+
+#define arch_adjust_zones(node, zone_size, holes) \
+ if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1)
+
+#endif
+
+/*
+ * Bus address is physical address
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-davinci/psc.h b/include/asm-arm/arch-davinci/psc.h
new file mode 100644
index 0000000..4977aa0
--- /dev/null
+++ b/include/asm-arm/arch-davinci/psc.h
@@ -0,0 +1,76 @@
+/*
+ * DaVinci Power & Sleep Controller (PSC) defines
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_PSC_H
+#define __ASM_ARCH_PSC_H
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN 0
+#define DAVINCI_GPSC_DSPDOMAIN 1
+
+#define DAVINCI_LPSC_VPSSMSTR 0
+#define DAVINCI_LPSC_VPSSSLV 1
+#define DAVINCI_LPSC_TPCC 2
+#define DAVINCI_LPSC_TPTC0 3
+#define DAVINCI_LPSC_TPTC1 4
+#define DAVINCI_LPSC_EMAC 5
+#define DAVINCI_LPSC_EMAC_WRAPPER 6
+#define DAVINCI_LPSC_MDIO 7
+#define DAVINCI_LPSC_IEEE1394 8
+#define DAVINCI_LPSC_USB 9
+#define DAVINCI_LPSC_ATA 10
+#define DAVINCI_LPSC_VLYNQ 11
+#define DAVINCI_LPSC_UHPI 12
+#define DAVINCI_LPSC_DDR_EMIF 13
+#define DAVINCI_LPSC_AEMIF 14
+#define DAVINCI_LPSC_MMC_SD 15
+#define DAVINCI_LPSC_MEMSTICK 16
+#define DAVINCI_LPSC_McBSP 17
+#define DAVINCI_LPSC_I2C 18
+#define DAVINCI_LPSC_UART0 19
+#define DAVINCI_LPSC_UART1 20
+#define DAVINCI_LPSC_UART2 21
+#define DAVINCI_LPSC_SPI 22
+#define DAVINCI_LPSC_PWM0 23
+#define DAVINCI_LPSC_PWM1 24
+#define DAVINCI_LPSC_PWM2 25
+#define DAVINCI_LPSC_GPIO 26
+#define DAVINCI_LPSC_TIMER0 27
+#define DAVINCI_LPSC_TIMER1 28
+#define DAVINCI_LPSC_TIMER2 29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
+#define DAVINCI_LPSC_ARM 31
+#define DAVINCI_LPSC_SCR2 32
+#define DAVINCI_LPSC_SCR3 33
+#define DAVINCI_LPSC_SCR4 34
+#define DAVINCI_LPSC_CROSSBAR 35
+#define DAVINCI_LPSC_CFG27 36
+#define DAVINCI_LPSC_CFG3 37
+#define DAVINCI_LPSC_CFG5 38
+#define DAVINCI_LPSC_GEM 39
+#define DAVINCI_LPSC_IMCOP 40
+
+#endif /* __ASM_ARCH_PSC_H */
diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h
new file mode 100644
index 0000000..ed418ef
--- /dev/null
+++ b/include/asm-arm/arch-davinci/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <asm/arch/io.h>
+
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h
new file mode 100644
index 0000000..440ac51
--- /dev/null
+++ b/include/asm-arm/arch-davinci/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+ davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-davinci/timex.h b/include/asm-arm/arch-davinci/timex.h
new file mode 100644
index 0000000..5282756
--- /dev/null
+++ b/include/asm-arm/arch-davinci/timex.h
@@ -0,0 +1,17 @@
+/*
+ * DaVinci timer defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* The source frequency for the timers is the 27MHz clock */
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h
new file mode 100644
index 0000000..f6d1570
--- /dev/null
+++ b/include/asm-arm/arch-davinci/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Author: Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <asm/arch/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+ volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+ while (!(uart[UART_LSR] & UART_LSR_THRE))
+ barrier();
+ uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+ volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ while (!(uart[UART_LSR] & UART_LSR_THRE))
+ barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h
new file mode 100644
index 0000000..9b47fa8
--- /dev/null
+++ b/include/asm-arm/arch-davinci/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <asm/arch/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END (IO_VIRT - (2<<20))
diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S
index aa23c5d..f242be5 100644
--- a/include/asm-arm/arch-ebsa110/entry-macro.S
+++ b/include/asm-arm/arch-ebsa110/entry-macro.S
@@ -16,13 +16,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #IRQ_STAT
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, stat, base, tmp
- mov \base, #IRQ_STAT
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0
tst \stat, #15
diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S
index 4203dbf..e63064e 100644
--- a/include/asm-arm/arch-ebsa285/entry-macro.S
+++ b/include/asm-arm/arch-ebsa285/entry-macro.S
@@ -11,24 +11,24 @@
#include <asm/arch/irqs.h>
#include <asm/hardware/dec21285.h>
+ .equ dc21285_high, ARMCSR_BASE & 0xff000000
+ .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
+
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #dc21285_high
+ .if dc21285_low
+ orr \base, \base, #dc21285_low
+ .endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
- .equ dc21285_high, ARMCSR_BASE & 0xff000000
- .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #dc21285_high
- .if dc21285_low
- orr r4, r4, #dc21285_low
- .endif
- ldr \irqstat, [r4, #0x180] @ get interrupts
+ ldr \irqstat, [\base, #0x180] @ get interrupts
mov \irqnr, #IRQ_SDRAMPARITY
tst \irqstat, #IRQ_MASK_SDRAMPARITY
diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h
index 7dfff4a..a6e0f9e 100644
--- a/include/asm-arm/arch-iop13xx/io.h
+++ b/include/asm-arm/arch-iop13xx/io.h
@@ -27,7 +27,7 @@
extern void __iomem * __iop13xx_io(unsigned long io_addr);
extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
- unsigned long flags);
+ unsigned int mtype);
extern void __iop13xx_iounmap(void __iomem *addr);
extern u32 iop13xx_atue_mem_base;
diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h
index 85707e9..e6736c3 100644
--- a/include/asm-arm/arch-iop13xx/iop13xx.h
+++ b/include/asm-arm/arch-iop13xx/iop13xx.h
@@ -181,6 +181,7 @@
#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200
#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400
#define IOP13XX_PBI_PMMR_OFFSET 0x00001580
+#define IOP13XX_MU_PMMR_OFFSET 0x00004000
#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188
#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188)
@@ -412,6 +413,34 @@
#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7)
/*=======================================================================*/
+/*============================MESSAGING UNIT=============================*/
+#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
+ (ofs))
+
+#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10)
+#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14)
+#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18)
+#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C)
+#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20)
+#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24)
+#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28)
+#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C)
+#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30)
+#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34)
+#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38)
+#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C)
+#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48)
+#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50)
+#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54)
+#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84)
+
+#define IOP13XX_MU_WINDOW_SIZE (8 * 1024)
+#define IOP13XX_MU_BASE_PHYS (0xff000000)
+#define IOP13XX_MU_BASE_PCI (0xff000000)
+#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48)
+#define IOP13XX_MU_MIMR_CORE_SELECT (15)
+/*=======================================================================*/
+
/*==============================ADMA UNITS===============================*/
#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9))
#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h
index 5c6fac2..054e7ac 100644
--- a/include/asm-arm/arch-iop13xx/irqs.h
+++ b/include/asm-arm/arch-iop13xx/irqs.h
@@ -168,7 +168,7 @@
#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */
#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */
#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */
-#define IRQ_IOP13XX_RSVD_113 (113) /* 17 */
+#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */
#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */
#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */
#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */
@@ -184,7 +184,13 @@
#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */
#define IRQ_IOP13XX_HPI (127) /* 31 */
+#ifdef CONFIG_PCI_MSI
+#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1)
+#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128)
+#else
#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1)
+#endif
+
#define NR_IRQS NR_IOP13XX_IRQS
#endif /* _IOP13XX_IRQ_H_ */
diff --git a/include/asm-arm/arch-iop13xx/msi.h b/include/asm-arm/arch-iop13xx/msi.h
new file mode 100644
index 0000000..b80c5ae
--- /dev/null
+++ b/include/asm-arm/arch-iop13xx/msi.h
@@ -0,0 +1,11 @@
+#ifndef _IOP13XX_MSI_H_
+#define _IOP13XX_MSI_H_
+#ifdef CONFIG_PCI_MSI
+void iop13xx_msi_init(void);
+#else
+static inline void iop13xx_msi_init(void)
+{
+ return;
+}
+#endif
+#endif
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
index 994f16a..958af75 100644
--- a/include/asm-arm/arch-iop32x/io.h
+++ b/include/asm-arm/arch-iop32x/io.h
@@ -14,7 +14,7 @@
#include <asm/hardware.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned long flags);
+ unsigned int mtype);
extern void __iop3xx_iounmap(void __iomem *addr);
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
index 993f758..fec9c53 100644
--- a/include/asm-arm/arch-iop33x/io.h
+++ b/include/asm-arm/arch-iop33x/io.h
@@ -14,7 +14,7 @@
#include <asm/hardware.h>
extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
- unsigned long flags);
+ unsigned int mtype);
extern void __iop3xx_iounmap(void __iomem *addr);
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S
new file mode 100644
index 0000000..cd5f2fb
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-ks8695/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/regs-uart.h>
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =KS8695_UART_PA @ physical base address
+ ldrne \rx, =KS8695_UART_VA @ virtual base address
+ .endm
+
+ .macro senduart, rd, rx
+ str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
+ .endm
+
+ .macro busyuart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTE @ Holding & Shift registers empty?
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
+ tst \rd, #URLS_URTHRE @ Holding Register empty?
+ beq 1001b
+ .endm
diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h
new file mode 100644
index 0000000..b0364dc
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/devices.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-ks8695/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* PCI */
+#define KS8695_MODE_PCI 0
+#define KS8695_MODE_MINIPCI 1
+#define KS8695_MODE_CARDBUS 2
+
+struct ks8695_pci_cfg {
+ short mode;
+ int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h
new file mode 100644
index 0000000..e5159ed
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/dma.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-arm/arch-ks8695/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S
new file mode 100644
index 0000000..e34bdf8
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ks8695/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/regs-irq.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
+
+ teq \irqstat, #0
+ beq 1001f
+
+ mov \irqnr, #0
+
+ tst \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tsteq \irqstat, #0xff
+ moveq \irqstat, \irqstat, lsr #8
+ addeq \irqnr, \irqnr, #8
+ tst \irqstat, #0x0f
+ moveq \irqstat, \irqstat, lsr #4
+ addeq \irqnr, \irqnr, #4
+ tst \irqstat, #0x03
+ moveq \irqstat, \irqstat, lsr #2
+ addeq \irqnr, \irqnr, #2
+ tst \irqstat, #0x01
+ addeqs \irqnr, \irqnr, #1
+1001:
+ .endm
diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h
new file mode 100644
index 0000000..cb732bf
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-ks8695/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA 0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA 0x03F00000
+#define KS8695_IO_VA 0xF0000000
+#define KS8695_IO_SIZE SZ_1M
+
+#define KS8695_PCIMEM_PA 0x60000000
+#define KS8695_PCIMEM_SIZE SZ_512M
+
+#define KS8695_PCIIO_PA 0x80000000
+#define KS8695_PCIIO_SIZE SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0
+#define PCIBIOS_MIN_MEM 0
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h
new file mode 100644
index 0000000..8edc4bd
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/io.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/arch-ks8695/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h
new file mode 100644
index 0000000..8b1c4fe
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-arm/arch-ks8695/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS 32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX 0
+#define KS8695_IRQ_COMM_TX 1
+#define KS8695_IRQ_EXTERN0 2
+#define KS8695_IRQ_EXTERN1 3
+#define KS8695_IRQ_EXTERN2 4
+#define KS8695_IRQ_EXTERN3 5
+#define KS8695_IRQ_TIMER0 6
+#define KS8695_IRQ_TIMER1 7
+#define KS8695_IRQ_UART_TX 8
+#define KS8695_IRQ_UART_RX 9
+#define KS8695_IRQ_UART_LINE_STATUS 10
+#define KS8695_IRQ_UART_MODEM_STATUS 11
+#define KS8695_IRQ_LAN_RX_STOP 12
+#define KS8695_IRQ_LAN_TX_STOP 13
+#define KS8695_IRQ_LAN_RX_BUF 14
+#define KS8695_IRQ_LAN_TX_BUF 15
+#define KS8695_IRQ_LAN_RX_STATUS 16
+#define KS8695_IRQ_LAN_TX_STATUS 17
+#define KS8695_IRQ_HPNA_RX_STOP 18
+#define KS8695_IRQ_HPNA_TX_STOP 19
+#define KS8695_IRQ_HPNA_RX_BUF 20
+#define KS8695_IRQ_HPNA_TX_BUF 21
+#define KS8695_IRQ_HPNA_RX_STATUS 22
+#define KS8695_IRQ_HPNA_TX_STATUS 23
+#define KS8695_IRQ_BUS_ERROR 24
+#define KS8695_IRQ_WAN_RX_STOP 25
+#define KS8695_IRQ_WAN_TX_STOP 26
+#define KS8695_IRQ_WAN_RX_BUF 27
+#define KS8695_IRQ_WAN_TX_BUF 28
+#define KS8695_IRQ_WAN_RX_STATUS 29
+#define KS8695_IRQ_WAN_TX_STATUS 30
+#define KS8695_IRQ_WAN_LINK 31
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h
new file mode 100644
index 0000000..24f6a6e
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/memory.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-ks8695/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \
+ __phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
+ (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
new file mode 100644
index 0000000..57fcf9f
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-gpio.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600)
+#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM (0x00) /* I/O Port Mode Register */
+#define KS8695_IOPC (0x04) /* I/O Port Control Register */
+#define KS8695_IOPD (0x08) /* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x) ((x) << 12)
+#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x) ((x) << 8)
+#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x) ((x) << 4)
+#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x) ((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */
+#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */
+#define IOPC_TM_RISING (2) /* Rising Edge Detection */
+#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
+#define IOPC_TM_EDGE (6) /* Both Edge Detection */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h
new file mode 100644
index 0000000..14091cd
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000)
+#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h
new file mode 100644
index 0000000..70b193f
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200)
+#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC (0x00) /* Mode Control Register */
+#define KS8695_INTEN (0x04) /* Interrupt Enable Register */
+#define KS8695_INTST (0x08) /* Interrupt Status Register */
+#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */
+#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */
+#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */
+#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h
new file mode 100644
index 0000000..a63bd61
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET (0xF0000 + 0x8000)
+#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */
+#define KS8695_LMDRXC (0x04) /* DMA Receive Control */
+#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */
+#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */
+#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
+#define KS8695_LMAL (0x18) /* MAC Station Address Low */
+#define KS8695_LMAH (0x1c) /* MAC Station Address High */
+#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */
+#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */
+#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */
+#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */
+#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */
+#define LMDTXC_LMTE (1 << 0) /* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */
+#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */
+#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */
+#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */
+#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */
+#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */
+#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */
+#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */
+#define LMDRXC_LMRA (1 << 2) /* Receive All */
+#define LMDRXC_LMRE (1 << 1) /* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E (1 << 31) /* Address Enabled */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h
new file mode 100644
index 0000000..76b38e0
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
+#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
+#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
+#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
+#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
+#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
+#define KS8695_SDGCON (0x38) /* SDRAM General Control */
+#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
+#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
+#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
+#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
+#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
+#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
+#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
+#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
+#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
+#define PMC_NORMAL (0 << 0)
+#define PMC_4WORD (1 << 0)
+#define PMC_8WORD (2 << 0)
+#define PMC_16WORD (3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT (3 << 28) /* Time Multiplier */
+#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
+#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
+#define SDCON_DBCAB (3 << 8) /* Column Address Bits */
+#define SDCON_DBBNUM (1 << 3) /* Number of Banks */
+#define SDCON_DBDBW (3 << 1) /* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
+#define SDGCON_SDCAS (3 << 0) /* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
+#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
+#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
+#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
+#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h
new file mode 100644
index 0000000..632ca66
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
+#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID (0x00) /* Device ID */
+#define KS8695_RID (0x04) /* Revision ID */
+#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
+#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
+#define KS8695_PPS (0x1c) /* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID (0xffff << 0) /* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID (0xf << 4) /* Sub-Device ID */
+#define RID_REVISION (0xf << 0) /* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS (1 << 1) /* Speed */
+#define HMC_HDS (1 << 0) /* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
+#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
+#define WMC_WANAP (1 << 28) /* Advertise Pause */
+#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
+#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
+#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
+#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
+#define WMC_WLS (1 << 23) /* Link status */
+#define WMC_WDS (1 << 22) /* Duplex status */
+#define WMC_WSS (1 << 21) /* Speed status */
+#define WMC_WLPP (1 << 20) /* Link Partner Pause */
+#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
+#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
+#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
+#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
+#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
+#define WMC_WANF100 (1 << 14) /* Force 100 */
+#define WMC_WANFF (1 << 13) /* Force FDX */
+#define WMC_WLED1S (7 << 4) /* LED1 Select */
+#define WLED1S_SPEED (0 << 4)
+#define WLED1S_LINK (1 << 4)
+#define WLED1S_DUPLEX (2 << 4)
+#define WLED1S_COLLISION (3 << 4)
+#define WLED1S_ACTIVITY (4 << 4)
+#define WLED1S_FDX_COLLISION (5 << 4)
+#define WLED1S_LINK_ACTIVITY (6 << 4)
+#define WMC_WLED0S (7 << 0) /* LED0 Select */
+#define WLED0S_SPEED (0 << 0)
+#define WLED0S_LINK (1 << 0)
+#define WLED0S_DUPLEX (2 << 0)
+#define WLED0S_COLLISION (3 << 0)
+#define WLED0S_ACTIVITY (4 << 0)
+#define WLED0S_FDX_COLLISION (5 << 0)
+#define WLED0S_LINK_ACTIVITY (6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK (1 << 14) /* Local Loopback */
+#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
+#define WPPM_WPI (1 << 12) /* PHY isolate */
+#define WPPM_WFL (1 << 10) /* Force link */
+#define WPPM_MDIXS (1 << 9) /* MDIX Status */
+#define WPPM_FEF (1 << 8) /* Far End Fault */
+#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
+#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
+#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
+#define WPPM_PD (1 << 4) /* Power Down */
+#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
+#define WPPM_FMDX (1 << 2) /* Force MDIX */
+#define WPPM_LPBK (1 << 1) /* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h
new file mode 100644
index 0000000..286d6d4
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET (0xF0000 + 0x2000)
+#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID (0x000) /* Configuration: Identification */
+#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */
+#define KS8695_CRCFRV (0x008) /* Configuration: Revision */
+#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */
+#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */
+#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */
+#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */
+#define KS8695_PBCA (0x100) /* Bridge Configuration Address */
+#define KS8695_PBCD (0x104) /* Bridge Configuration Data */
+#define KS8695_PBM (0x200) /* Bridge Mode */
+#define KS8695_PBCS (0x204) /* Bridge Control and Status */
+#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */
+#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */
+#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */
+#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST (1 << 23)
+
+#define PBCA_TYPE1 (1)
+#define PBCA_ENABLE (1 << 31)
+
+
diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h
new file mode 100644
index 0000000..5f37be3
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
+#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
+#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
+
+#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC (0x50) /* Indirect Access Control */
+#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
+#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
+#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
+#define KS8695_SEAFC (0x60) /* Advance Feature Control */
+#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
+#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
+#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
+#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
+#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S (7 << 25) /* LED1 Select */
+#define LLED1S_SPEED (0 << 25)
+#define LLED1S_LINK (1 << 25)
+#define LLED1S_DUPLEX (2 << 25)
+#define LLED1S_COLLISION (3 << 25)
+#define LLED1S_ACTIVITY (4 << 25)
+#define LLED1S_FDX_COLLISION (5 << 25)
+#define LLED1S_LINK_ACTIVITY (6 << 25)
+#define SEC0_LLED0S (7 << 22) /* LED0 Select */
+#define LLED0S_SPEED (0 << 22)
+#define LLED0S_LINK (1 << 22)
+#define LLED0S_DUPLEX (2 << 22)
+#define LLED0S_COLLISION (3 << 22)
+#define LLED0S_ACTIVITY (4 << 22)
+#define LLED0S_FDX_COLLISION (5 << 22)
+#define LLED0S_LINK_ACTIVITY (6 << 22)
+#define SEC0_ENABLE (1 << 0) /* Enable Switch */
+
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h
new file mode 100644
index 0000000..f317981
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET (0xF0000 + 0x0000)
+#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG (0x00) /* System Configuration Register */
+#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */
+#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h
new file mode 100644
index 0000000..0a9f7f9
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
+#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h
new file mode 100644
index 0000000..a27cb20
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * linux/include/asm-arm/arch-ks8695/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
+#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB (0x00) /* Receive Buffer Register */
+#define KS8695_URTH (0x04) /* Transmit Holding Register */
+#define KS8695_URFC (0x08) /* FIFO Control Register */
+#define KS8695_URLC (0x0C) /* Line Control Register */
+#define KS8695_URMC (0x10) /* Modem Control Register */
+#define KS8695_URLS (0x14) /* Line Status Register */
+#define KS8695_URMS (0x18) /* Modem Status Register */
+#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
+#define KS8695_USR (0x20) /* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
+#define URFC_URFRT_1 (0 << 6)
+#define URFC_URFRT_4 (1 << 6)
+#define URFC_URFRT_8 (2 << 6)
+#define URFC_URFRT_14 (3 << 6)
+#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
+#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
+#define URFC_URFE (1 << 0) /* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC (1 << 6) /* Set Break Condition */
+#define URLC_PARITY (7 << 3) /* Parity */
+#define URPE_NONE (0 << 3)
+#define URPE_ODD (1 << 3)
+#define URPE_EVEN (3 << 3)
+#define URPE_MARK (5 << 3)
+#define URPE_SPACE (7 << 3)
+#define URLC_URSB (1 << 2) /* Stop Bits */
+#define URLC_URCL (3 << 0) /* Character Length */
+#define URCL_5 (0 << 0)
+#define URCL_6 (1 << 0)
+#define URCL_7 (2 << 0)
+#define URCL_8 (3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB (1 << 4) /* Loop-back mode */
+#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
+#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
+#define URMC_URRTS (1 << 1) /* Request to Send */
+#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
+#define URLS_URTE (1 << 6) /* Transmit Empty */
+#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
+#define URLS_URBI (1 << 4) /* Break Interrupt */
+#define URLS_URFE (1 << 3) /* Framing Error */
+#define URLS_URPE (1 << 2) /* Parity Error */
+#define URLS_URROE (1 << 1) /* Receive Overrun Error */
+#define URLS_URDR (1 << 0) /* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
+#define URMS_URRI (1 << 6) /* Ring Indicator */
+#define URMS_URDSR (1 << 5) /* Data Set Ready */
+#define URMS_URCTS (1 << 4) /* Clear to Send */
+#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
+#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
+#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI (1 << 0) /* Timeout Indication */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h
new file mode 100644
index 0000000..52e35b0
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * include/asm-arm/arch-ks8695/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
+#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
+#define KS8695_WMDRXC (0x04) /* DMA Receive Control */
+#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
+#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
+#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
+#define KS8695_WMAL (0x18) /* MAC Station Address Low */
+#define KS8695_WMAH (0x1c) /* MAC Station Address High */
+#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
+#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
+#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
+#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
+#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
+#define WMDTXC_WMTE (1 << 0) /* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
+#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
+#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
+#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
+#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
+#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
+#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
+#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
+#define WMDRXC_WMRA (1 << 2) /* Receive All */
+#define WMDRXC_WMRE (1 << 0) /* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E (1 << 31) /* Address Enabled */
+
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h
new file mode 100644
index 0000000..3bc2810
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/system.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-arm/arch-s3c2410/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <asm/arch/regs-timer.h>
+
+static void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks,
+ */
+ cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+ unsigned int reg;
+
+ if (mode == 's')
+ cpu_reset(0);
+
+ /* disable timer0 */
+ reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* enable watchdog mode */
+ __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+ /* re-enable timer0 */
+ __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h
new file mode 100644
index 0000000..8320d52
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/timex.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-ks8695/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h
new file mode 100644
index 0000000..733a508
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-ks8695/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <asm/arch/regs-uart.h>
+
+static void putc(char c)
+{
+ while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+ barrier();
+
+ __raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+ while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+ barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h
new file mode 100644
index 0000000..d1d88e58
--- /dev/null
+++ b/include/asm-arm/arch-ks8695/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/arch-ks8695/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 828cc5c..f1ec2ed 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -421,7 +421,9 @@
/* 24xx clock */
W14_24XX_SYS_CLKOUT,
- /* 24xx GPMC wait pin monitoring */
+ /* 24xx GPMC chipselects, wait pin monitoring */
+ E2_GPMC_NCS2,
+ L2_GPMC_NCS7,
L3_GPMC_WAIT0,
N7_GPMC_WAIT1,
M1_GPMC_WAIT2,
@@ -435,6 +437,7 @@
/* 24xx GPIO */
M21_242X_GPIO11,
+ P21_242X_GPIO12,
AA10_242X_GPIO13,
AA6_242X_GPIO14,
AA4_242X_GPIO15,
@@ -444,7 +447,9 @@
Y20_24XX_GPIO60,
W4__24XX_GPIO74,
M15_24XX_GPIO92,
+ J15_24XX_GPIO99,
V14_24XX_GPIO117,
+ P14_24XX_GPIO125,
/* 242x DBG GPIO */
V4_242X_GPIO49,
@@ -486,6 +491,30 @@
G18_24XX_MMC_CMD_DIR,
H15_24XX_MMC_CLKI,
+ /* Full speed USB */
+ J20_24XX_USB0_PUEN,
+ J19_24XX_USB0_VP,
+ K20_24XX_USB0_VM,
+ J18_24XX_USB0_RCV,
+ K19_24XX_USB0_TXEN,
+ J14_24XX_USB0_SE0,
+ K18_24XX_USB0_DAT,
+
+ N14_24XX_USB1_SE0,
+ W12_24XX_USB1_SE0,
+ P15_24XX_USB1_DAT,
+ R13_24XX_USB1_DAT,
+ W20_24XX_USB1_TXEN,
+ P13_24XX_USB1_TXEN,
+ V19_24XX_USB1_RCV,
+ V12_24XX_USB1_RCV,
+
+ AA10_24XX_USB2_SE0,
+ Y11_24XX_USB2_DAT,
+ AA12_24XX_USB2_TXEN,
+ AA6_24XX_USB2_RCV,
+ AA4_24XX_USB2_TLLSE0,
+
/* Keypad GPIO*/
T19_24XX_KBR0,
R19_24XX_KBR1,
diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S
index 138838d..3b4e207 100644
--- a/include/asm-arm/arch-realview/entry-macro.S
+++ b/include/asm-arm/arch-realview/entry-macro.S
@@ -14,6 +14,7 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
@@ -40,7 +41,6 @@
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S
index 0cfb89b..038b761 100644
--- a/include/asm-arm/arch-rpc/entry-macro.S
+++ b/include/asm-arm/arch-rpc/entry-macro.S
@@ -1,6 +1,14 @@
#include <asm/hardware.h>
#include <asm/hardware/entry-macro-iomd.S>
+
+ .equ ioc_base_high, IOC_BASE & 0xff000000
+ .equ ioc_base_low, IOC_BASE & 0x00ff0000
+
.macro get_irqnr_preamble, base, tmp
+ mov \base, #ioc_base_high @ point at IOC
+ .if ioc_base_low
+ orr \base, \base, #ioc_base_low
+ .endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
index cd9e265..c141465 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -129,6 +129,7 @@
#define S3C2443_PCLKCON_IIC (1<<4)
#define S3C2443_PCLKCON_SDI (1<<5)
#define S3C2443_PCLKCON_ADC (1<<7)
+#define S3C2443_PCLKCON_AC97 (1<<8)
#define S3C2443_PCLKCON_IIS (1<<9)
#define S3C2443_PCLKCON_PWMT (1<<10)
#define S3C2443_PCLKCON_WDT (1<<11)
diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S
index 0289676..127db4a 100644
--- a/include/asm-arm/arch-sa1100/entry-macro.S
+++ b/include/asm-arm/arch-sa1100/entry-macro.S
@@ -12,16 +12,16 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #0xfa000000 @ ICIP = 0xfa050000
+ add \base, \base, #0x00050000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #0xfa000000 @ ICIP = 0xfa050000
- add r4, r4, #0x00050000
- ldr \irqstat, [r4] @ get irqs
- ldr \irqnr, [r4, #4] @ ICMR = 0xfa050004
+ ldr \irqstat, [\base] @ get irqs
+ ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
ands \irqstat, \irqstat, \irqnr
mov \irqnr, #0
beq 1001f
diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S
index 0fae002..924d1a8 100644
--- a/include/asm-arm/arch-versatile/entry-macro.S
+++ b/include/asm-arm/arch-versatile/entry-macro.S
@@ -14,13 +14,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE)
ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
mov \irqnr, #0
teq \irqstat, #0
diff --git a/include/asm-arm/ecard.h b/include/asm-arm/ecard.h
index 3a6d3eb..684fe06 100644
--- a/include/asm-arm/ecard.h
+++ b/include/asm-arm/ecard.h
@@ -121,7 +121,7 @@
typedef struct expansion_card ecard_t;
typedef unsigned long *loader_t;
-typedef struct { /* Card handler routines */
+typedef struct expansion_card_ops { /* Card handler routines */
void (*irqenable)(ecard_t *ec, int irqnr);
void (*irqdisable)(ecard_t *ec, int irqnr);
int (*irqpending)(ecard_t *ec);
@@ -179,6 +179,8 @@
u64 dma_mask;
};
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
+
struct in_chunk_dir {
unsigned int start_offset;
union {
@@ -224,6 +226,10 @@
extern int ecard_request_resources(struct expansion_card *ec);
extern void ecard_release_resources(struct expansion_card *ec);
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+ unsigned long offset, unsigned long maxsize);
+#define ecardm_iounmap(__ec, __addr) devm_iounmap(&(__ec)->dev, __addr)
+
extern struct bus_type ecard_bus_type;
#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev)
diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/include/asm-arm/hardware/entry-macro-iomd.S
index fbed08f..9bb580a 100644
--- a/include/asm-arm/hardware/entry-macro-iomd.S
+++ b/include/asm-arm/hardware/entry-macro-iomd.S
@@ -11,8 +11,6 @@
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
- .equ ioc_base_high, IOC_BASE & 0xff000000
- .equ ioc_base_low, IOC_BASE & 0x00ff0000
.macro disable_fiq
mov r12, #ioc_base_high
.if ioc_base_low
@@ -22,33 +20,29 @@
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #ioc_base_high @ point at IOC
- .if ioc_base_low
- orr r4, r4, #ioc_base_low
- .endif
- ldrb \irqstat, [r4, #IOMD_IRQREQB] @ get high priority first
- ldr \base, =irq_prio_h
+ ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first
+ ldr \tmp, =irq_prio_h
teq \irqstat, #0
#ifdef IOMD_BASE
- ldreqb \irqstat, [r4, #IOMD_DMAREQ] @ get dma
- addeq \base, \base, #256 @ irq_prio_h table size
+ ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma
+ addeq \tmp, \tmp, #256 @ irq_prio_h table size
teqeq \irqstat, #0
bne 2406f
#endif
- ldreqb \irqstat, [r4, #IOMD_IRQREQA] @ get low priority
- addeq \base, \base, #256 @ irq_prio_d table size
+ ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority
+ addeq \tmp, \tmp, #256 @ irq_prio_d table size
teqeq \irqstat, #0
#ifdef IOMD_IRQREQC
- ldreqb \irqstat, [r4, #IOMD_IRQREQC]
- addeq \base, \base, #256 @ irq_prio_l table size
+ ldreqb \irqstat, [\base, #IOMD_IRQREQC]
+ addeq \tmp, \tmp, #256 @ irq_prio_l table size
teqeq \irqstat, #0
#endif
#ifdef IOMD_IRQREQD
- ldreqb \irqstat, [r4, #IOMD_IRQREQD]
- addeq \base, \base, #256 @ irq_prio_lc table size
+ ldreqb \irqstat, [\base, #IOMD_IRQREQD]
+ addeq \tmp, \tmp, #256 @ irq_prio_lc table size
teqeq \irqstat, #0
#endif
-2406: ldrneb \irqnr, [\base, \irqstat] @ get IRQ number
+2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number
.endm
/*
diff --git a/include/asm-arm/poll.h b/include/asm-arm/poll.h
index 5030b2b..c98509d 100644
--- a/include/asm-arm/poll.h
+++ b/include/asm-arm/poll.h
@@ -1,27 +1 @@
-#ifndef __ASMARM_POLL_H
-#define __ASMARM_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-arm/sizes.h b/include/asm-arm/sizes.h
index 7f50ae0..503843d 100644
--- a/include/asm-arm/sizes.h
+++ b/include/asm-arm/sizes.h
@@ -24,6 +24,10 @@
#define __sizes_h 1
/* handy sizes */
+#define SZ_16 0x00000010
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
#define SZ_1K 0x00000400
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
diff --git a/include/asm-arm26/poll.h b/include/asm-arm26/poll.h
index 9ccb7f4..1170e70 100644
--- a/include/asm-arm26/poll.h
+++ b/include/asm-arm26/poll.h
@@ -1,26 +1,8 @@
#ifndef __ASMARM_POLL_H
#define __ASMARM_POLL_H
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
+#include <asm-generic/poll.h>
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#undef POLLREMOVE
#endif
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
index 2bdc5bd..a762f42 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/include/asm-avr32/arch-at32ap/cpu.h
@@ -29,5 +29,6 @@
#define cpu_is_at91sam9260() (0)
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
+#define cpu_is_at91sam9rl() (0)
#endif /* __ASM_ARCH_CPU_H */
diff --git a/include/asm-avr32/poll.h b/include/asm-avr32/poll.h
index 736e297..c98509d 100644
--- a/include/asm-avr32/poll.h
+++ b/include/asm-avr32/poll.h
@@ -1,27 +1 @@
-#ifndef __ASM_AVR32_POLL_H
-#define __ASM_AVR32_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif /* __ASM_AVR32_POLL_H */
+#include <asm-generic/poll.h>
diff --git a/include/asm-cris/poll.h b/include/asm-cris/poll.h
index 1b25d4c..c98509d 100644
--- a/include/asm-cris/poll.h
+++ b/include/asm-cris/poll.h
@@ -1,26 +1 @@
-#ifndef __ASM_CRIS_POLL_H
-#define __ASM_CRIS_POLL_H
-
-/* taken from asm-alpha */
-
-#define POLLIN 1
-#define POLLPRI 2
-#define POLLOUT 4
-#define POLLERR 8
-#define POLLHUP 16
-#define POLLNVAL 32
-#define POLLRDNORM 64
-#define POLLRDBAND 128
-#define POLLWRNORM 256
-#define POLLWRBAND 512
-#define POLLMSG 1024
-#define POLLREMOVE 4096
-#define POLLRDHUP 8192
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-frv/poll.h b/include/asm-frv/poll.h
index c8fe880..0d01479 100644
--- a/include/asm-frv/poll.h
+++ b/include/asm-frv/poll.h
@@ -1,24 +1,12 @@
#ifndef _ASM_POLL_H
#define _ASM_POLL_H
-#define POLLIN 1
-#define POLLPRI 2
-#define POLLOUT 4
-#define POLLERR 8
-#define POLLHUP 16
-#define POLLNVAL 32
-#define POLLRDNORM 64
#define POLLWRNORM POLLOUT
-#define POLLRDBAND 128
#define POLLWRBAND 256
-#define POLLMSG 0x0400
-#define POLLRDHUP 0x2000
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
+
+#undef POLLREMOVE
#endif
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
index fa14f8c..5bfeef7 100644
--- a/include/asm-generic/Kbuild
+++ b/include/asm-generic/Kbuild
@@ -4,6 +4,7 @@
header-y += ioctl.h
header-y += ipc.h
header-y += mman.h
+header-y += poll.h
header-y += signal.h
header-y += statfs.h
diff --git a/include/asm-generic/audit_signal.h b/include/asm-generic/audit_signal.h
new file mode 100644
index 0000000..6feab7f
--- /dev/null
+++ b/include/asm-generic/audit_signal.h
@@ -0,0 +1,3 @@
+__NR_kill,
+__NR_tgkill,
+__NR_tkill,
diff --git a/include/asm-generic/poll.h b/include/asm-generic/poll.h
new file mode 100644
index 0000000..44bce83
--- /dev/null
+++ b/include/asm-generic/poll.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_GENERIC_POLL_H
+#define __ASM_GENERIC_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN 0x0001
+#define POLLPRI 0x0002
+#define POLLOUT 0x0004
+#define POLLERR 0x0008
+#define POLLHUP 0x0010
+#define POLLNVAL 0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM 0x0040
+#define POLLRDBAND 0x0080
+#ifndef POLLWRNORM
+#define POLLWRNORM 0x0100
+#endif
+#ifndef POLLWRBAND
+#define POLLWRBAND 0x0200
+#endif
+#ifndef POLLMSG
+#define POLLMSG 0x0400
+#endif
+#ifndef POLLREMOVE
+#define POLLREMOVE 0x1000
+#endif
+#ifndef POLLRDHUP
+#define POLLRDHUP 0x2000
+#endif
+
+struct pollfd {
+ int fd;
+ short events;
+ short revents;
+};
+
+#endif /* __ASM_GENERIC_POLL_H */
diff --git a/include/asm-h8300/atomic.h b/include/asm-h8300/atomic.h
index 21f5442..b4cf0ea 100644
--- a/include/asm-h8300/atomic.h
+++ b/include/asm-h8300/atomic.h
@@ -37,6 +37,7 @@
}
#define atomic_sub(i, v) atomic_sub_return(i, v)
+#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0)
static __inline__ int atomic_inc_return(atomic_t *v)
{
diff --git a/include/asm-h8300/poll.h b/include/asm-h8300/poll.h
index fc52103..f61540c 100644
--- a/include/asm-h8300/poll.h
+++ b/include/asm-h8300/poll.h
@@ -1,23 +1,11 @@
#ifndef __H8300_POLL_H
#define __H8300_POLL_H
-#define POLLIN 1
-#define POLLPRI 2
-#define POLLOUT 4
-#define POLLERR 8
-#define POLLHUP 16
-#define POLLNVAL 32
-#define POLLRDNORM 64
#define POLLWRNORM POLLOUT
-#define POLLRDBAND 128
#define POLLWRBAND 256
-#define POLLMSG 0x0400
-#define POLLRDHUP 0x2000
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
+
+#undef POLLREMOVE
#endif
diff --git a/include/asm-h8300/unistd.h b/include/asm-h8300/unistd.h
index 7ddd414..99f3c35 100644
--- a/include/asm-h8300/unistd.h
+++ b/include/asm-h8300/unistd.h
@@ -21,7 +21,7 @@
#define __NR_time 13
#define __NR_mknod 14
#define __NR_chmod 15
-#define __NR_chown 16
+#define __NR_lchown 16
#define __NR_break 17
#define __NR_oldstat 18
#define __NR_lseek 19
@@ -115,10 +115,10 @@
#define __NR_lstat 107
#define __NR_fstat 108
#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
+#define __NR_iopl 110
#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
+#define __NR_idle 112
+#define __NR_vm86old 113
#define __NR_wait4 114
#define __NR_swapoff 115
#define __NR_sysinfo 116
@@ -128,7 +128,7 @@
#define __NR_clone 120
#define __NR_setdomainname 121
#define __NR_uname 122
-#define __NR_cacheflush 123
+#define __NR_modify_ldt 123
#define __NR_adjtimex 124
#define __NR_mprotect 125
#define __NR_sigprocmask 126
@@ -171,7 +171,7 @@
#define __NR_mremap 163
#define __NR_setresuid 164
#define __NR_getresuid 165
-#define __NR_getpagesize 166
+#define __NR_vm86 166
#define __NR_query_module 167
#define __NR_poll 168
#define __NR_nfsservctl 169
@@ -187,7 +187,7 @@
#define __NR_rt_sigsuspend 179
#define __NR_pread64 180
#define __NR_pwrite64 181
-#define __NR_lchown 182
+#define __NR_chown 182
#define __NR_getcwd 183
#define __NR_capget 184
#define __NR_capset 185
@@ -203,7 +203,7 @@
#define __NR_stat64 195
#define __NR_lstat64 196
#define __NR_fstat64 197
-#define __NR_chown32 198
+#define __NR_lchown32 198
#define __NR_getuid32 199
#define __NR_getgid32 200
#define __NR_geteuid32 201
@@ -217,15 +217,18 @@
#define __NR_getresuid32 209
#define __NR_setresgid32 210
#define __NR_getresgid32 211
-#define __NR_lchown32 212
+#define __NR_chown32 212
#define __NR_setuid32 213
#define __NR_setgid32 214
#define __NR_setfsuid32 215
#define __NR_setfsgid32 216
#define __NR_pivot_root 217
+#define __NR_mincore 218
+#define __NR_madvise 219
+#define __NR_madvise1 219
#define __NR_getdents64 220
#define __NR_fcntl64 221
-#define __NR_security 223
+/* 223 is unused */
#define __NR_gettid 224
#define __NR_readahead 225
#define __NR_setxattr 226
@@ -252,13 +255,13 @@
#define __NR_io_getevents 247
#define __NR_io_submit 248
#define __NR_io_cancel 249
-#define __NR_alloc_hugepages 250
-#define __NR_free_hugepages 251
+#define __NR_fadvise64 250
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
#define __NR_exit_group 252
#define __NR_lookup_dcookie 253
-#define __NR_sys_epoll_create 254
-#define __NR_sys_epoll_ctl 255
-#define __NR_sys_epoll_wait 256
+#define __NR_epoll_create 254
+#define __NR_epoll_ctl 255
+#define __NR_epoll_wait 256
#define __NR_remap_file_pages 257
#define __NR_set_tid_address 258
#define __NR_timer_create 259
@@ -291,10 +294,41 @@
#define __NR_add_key 286
#define __NR_request_key 287
#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+#define __NR_migrate_pages 294
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_fstatat64 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
+#define __NR_unshare 310
+#define __NR_set_robust_list 311
+#define __NR_get_robust_list 312
+#define __NR_splice 313
+#define __NR_sync_file_range 314
+#define __NR_tee 315
+#define __NR_vmsplice 316
+#define __NR_move_pages 317
+#define __NR_getcpu 318
+#define __NR_epoll_pwait 319
#ifdef __KERNEL__
-#define NR_syscalls 289
+#define NR_syscalls 320
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/include/asm-i386/alternative.h b/include/asm-i386/alternative.h
index 0f70b37..eb7da54 100644
--- a/include/asm-i386/alternative.h
+++ b/include/asm-i386/alternative.h
@@ -98,6 +98,12 @@
".previous" : output : [feat] "i" (feature), ##input)
/*
+ * use this macro(s) if you need more than one output parameter
+ * in alternative_io
+ */
+#define ASM_OUTPUT2(a, b) a, b
+
+/*
* Alternative inline assembly for SMP.
*
* The LOCK_PREFIX macro defined here replaces the LOCK and
diff --git a/include/asm-i386/kdebug.h b/include/asm-i386/kdebug.h
index 05c3117..a185b5f 100644
--- a/include/asm-i386/kdebug.h
+++ b/include/asm-i386/kdebug.h
@@ -27,7 +27,6 @@
DIE_GPF,
DIE_CALL,
DIE_NMI_IPI,
- DIE_NMI_POST,
DIE_PAGE_FAULT,
};
diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h
index bc5c12c..d7a0512 100644
--- a/include/asm-i386/paravirt.h
+++ b/include/asm-i386/paravirt.h
@@ -222,11 +222,6 @@
void (*iret)(void);
};
-/* Mark a paravirt probe function. */
-#define paravirt_probe(fn) \
- static asmlinkage void (*__paravirtprobe_##fn)(void) __attribute_used__ \
- __attribute__((__section__(".paravirtprobe"))) = fn
-
extern struct paravirt_ops paravirt_ops;
#define PARAVIRT_PATCH(x) \
diff --git a/include/asm-i386/pgalloc.h b/include/asm-i386/pgalloc.h
index 4743017..d07b7af 100644
--- a/include/asm-i386/pgalloc.h
+++ b/include/asm-i386/pgalloc.h
@@ -65,6 +65,4 @@
#define pud_populate(mm, pmd, pte) BUG()
#endif
-#define check_pgt_cache() do { } while (0)
-
#endif /* _I386_PGALLOC_H */
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index edce9d5..2394589 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -35,17 +35,16 @@
#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
extern unsigned long empty_zero_page[1024];
extern pgd_t swapper_pg_dir[1024];
-extern struct kmem_cache *pgd_cache;
extern struct kmem_cache *pmd_cache;
extern spinlock_t pgd_lock;
extern struct page *pgd_list;
+void check_pgt_cache(void);
void pmd_ctor(void *, struct kmem_cache *, unsigned long);
-void pgd_ctor(void *, struct kmem_cache *, unsigned long);
-void pgd_dtor(void *, struct kmem_cache *, unsigned long);
void pgtable_cache_init(void);
void paging_init(void);
+
/*
* The Linux x86 paging architecture is 'compile-time dual-mode', it
* implements both the traditional 2-level x86 page tables and the
diff --git a/include/asm-i386/poll.h b/include/asm-i386/poll.h
index 2cd4929..c98509d 100644
--- a/include/asm-i386/poll.h
+++ b/include/asm-i386/poll.h
@@ -1,27 +1 @@
-#ifndef __i386_POLL_H
-#define __i386_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h
index 70f3515..338668b 100644
--- a/include/asm-i386/processor.h
+++ b/include/asm-i386/processor.h
@@ -749,9 +749,13 @@
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
+/* Defined in head.S */
+extern struct Xgt_desc_struct early_gdt_descr;
+
extern void cpu_set_gdt(int);
extern void switch_to_new_gdt(void);
extern void cpu_init(void);
+extern void init_gdt(int cpu);
extern int force_mwait;
diff --git a/include/asm-i386/tsc.h b/include/asm-i386/tsc.h
index 3f3c1fa..62c091f 100644
--- a/include/asm-i386/tsc.h
+++ b/include/asm-i386/tsc.h
@@ -35,14 +35,16 @@
static __always_inline cycles_t get_cycles_sync(void)
{
unsigned long long ret;
- unsigned eax;
+ unsigned eax, edx;
/*
* Use RDTSCP if possible; it is guaranteed to be synchronous
* and doesn't cause a VMEXIT on Hypervisors
*/
alternative_io(ASM_NOP3, ".byte 0x0f,0x01,0xf9", X86_FEATURE_RDTSCP,
- "=A" (ret), "0" (0ULL) : "ecx", "memory");
+ ASM_OUTPUT2("=a" (eax), "=d" (edx)),
+ "a" (0U), "d" (0U) : "ecx", "memory");
+ ret = (((unsigned long long)edx) << 32) | ((unsigned long long)eax);
if (ret)
return ret;
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index bd21e79..e84ace1 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -326,10 +326,13 @@
#define __NR_getcpu 318
#define __NR_epoll_pwait 319
#define __NR_utimensat 320
+#define __NR_signalfd 321
+#define __NR_timerfd 322
+#define __NR_eventfd 323
#ifdef __KERNEL__
-#define NR_syscalls 321
+#define NR_syscalls 324
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
index 79479e2..6722161 100644
--- a/include/asm-ia64/irq.h
+++ b/include/asm-ia64/irq.h
@@ -11,6 +11,9 @@
* 02/29/00 D.Mosberger moved most things into hw_irq.h
*/
+#include <linux/types.h>
+#include <linux/cpumask.h>
+
#define NR_IRQS 256
#define NR_IRQ_VECTORS NR_IRQS
@@ -29,5 +32,8 @@
extern void disable_irq_nosync (unsigned int);
extern void enable_irq (unsigned int);
extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
+bool is_affinity_mask_valid(cpumask_t cpumask);
+
+#define is_affinity_mask_valid is_affinity_mask_valid
#endif /* _ASM_IA64_IRQ_H */
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
index 828ae00..2abc98b 100644
--- a/include/asm-ia64/kprobes.h
+++ b/include/asm-ia64/kprobes.h
@@ -71,13 +71,15 @@
#define MAX_PARAM_RSE_SIZE (0x60+0x60/0x3f)
/* per-cpu kprobe control block */
+#define ARCH_PREV_KPROBE_SZ 2
struct kprobe_ctlblk {
unsigned long kprobe_status;
struct pt_regs jprobe_saved_regs;
unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
unsigned long *bsp;
unsigned long cfm;
- struct prev_kprobe prev_kprobe;
+ atomic_t prev_kprobe_index;
+ struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
};
#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
index 560c287..67552ca 100644
--- a/include/asm-ia64/pgalloc.h
+++ b/include/asm-ia64/pgalloc.h
@@ -18,71 +18,18 @@
#include <linux/mm.h>
#include <linux/page-flags.h>
#include <linux/threads.h>
+#include <linux/quicklist.h>
#include <asm/mmu_context.h>
-DECLARE_PER_CPU(unsigned long *, __pgtable_quicklist);
-#define pgtable_quicklist __ia64_per_cpu_var(__pgtable_quicklist)
-DECLARE_PER_CPU(long, __pgtable_quicklist_size);
-#define pgtable_quicklist_size __ia64_per_cpu_var(__pgtable_quicklist_size)
-
-static inline long pgtable_quicklist_total_size(void)
-{
- long ql_size = 0;
- int cpuid;
-
- for_each_online_cpu(cpuid) {
- ql_size += per_cpu(__pgtable_quicklist_size, cpuid);
- }
- return ql_size;
-}
-
-static inline void *pgtable_quicklist_alloc(void)
-{
- unsigned long *ret = NULL;
-
- preempt_disable();
-
- ret = pgtable_quicklist;
- if (likely(ret != NULL)) {
- pgtable_quicklist = (unsigned long *)(*ret);
- ret[0] = 0;
- --pgtable_quicklist_size;
- preempt_enable();
- } else {
- preempt_enable();
- ret = (unsigned long *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
- }
-
- return ret;
-}
-
-static inline void pgtable_quicklist_free(void *pgtable_entry)
-{
-#ifdef CONFIG_NUMA
- int nid = page_to_nid(virt_to_page(pgtable_entry));
-
- if (unlikely(nid != numa_node_id())) {
- free_page((unsigned long)pgtable_entry);
- return;
- }
-#endif
-
- preempt_disable();
- *(unsigned long *)pgtable_entry = (unsigned long)pgtable_quicklist;
- pgtable_quicklist = (unsigned long *)pgtable_entry;
- ++pgtable_quicklist_size;
- preempt_enable();
-}
-
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- return pgtable_quicklist_alloc();
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline void pgd_free(pgd_t * pgd)
{
- pgtable_quicklist_free(pgd);
+ quicklist_free(0, NULL, pgd);
}
#ifdef CONFIG_PGTABLE_4
@@ -94,12 +41,12 @@
static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return pgtable_quicklist_alloc();
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline void pud_free(pud_t * pud)
{
- pgtable_quicklist_free(pud);
+ quicklist_free(0, NULL, pud);
}
#define __pud_free_tlb(tlb, pud) pud_free(pud)
#endif /* CONFIG_PGTABLE_4 */
@@ -112,12 +59,12 @@
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return pgtable_quicklist_alloc();
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline void pmd_free(pmd_t * pmd)
{
- pgtable_quicklist_free(pmd);
+ quicklist_free(0, NULL, pmd);
}
#define __pmd_free_tlb(tlb, pmd) pmd_free(pmd)
@@ -137,28 +84,31 @@
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long addr)
{
- void *pg = pgtable_quicklist_alloc();
+ void *pg = quicklist_alloc(0, GFP_KERNEL, NULL);
return pg ? virt_to_page(pg) : NULL;
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long addr)
{
- return pgtable_quicklist_alloc();
+ return quicklist_alloc(0, GFP_KERNEL, NULL);
}
static inline void pte_free(struct page *pte)
{
- pgtable_quicklist_free(page_address(pte));
+ quicklist_free_page(0, NULL, pte);
}
static inline void pte_free_kernel(pte_t * pte)
{
- pgtable_quicklist_free(pte);
+ quicklist_free(0, NULL, pte);
+}
+
+static inline void check_pgt_cache(void)
+{
+ quicklist_trim(0, NULL, 25, 16);
}
#define __pte_free_tlb(tlb, pte) pte_free(pte)
-extern void check_pgt_cache(void);
-
#endif /* _ASM_IA64_PGALLOC_H */
diff --git a/include/asm-ia64/poll.h b/include/asm-ia64/poll.h
index bcaf9f1..c98509d 100644
--- a/include/asm-ia64/poll.h
+++ b/include/asm-ia64/poll.h
@@ -1,32 +1 @@
-#ifndef _ASM_IA64_POLL_H
-#define _ASM_IA64_POLL_H
-
-/*
- * poll(2) bit definitions. Based on <asm-i386/poll.h>.
- *
- * Modified 1998, 1999, 2002
- * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif /* _ASM_IA64_POLL_H */
+#include <asm-generic/poll.h>
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index 861c8ec..f049bc4 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -294,11 +294,13 @@
#define __NR_vmsplice 1302
/* 1303 reserved for move_pages */
#define __NR_getcpu 1304
+#define __NR_epoll_pwait 1305
+#define __NR_utimensat 1306
#ifdef __KERNEL__
-#define NR_syscalls 281 /* length of syscall table */
+#define NR_syscalls 283 /* length of syscall table */
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
diff --git a/include/asm-m32r/pgtable-2level.h b/include/asm-m32r/pgtable-2level.h
index 7509257..bca3475 100644
--- a/include/asm-m32r/pgtable-2level.h
+++ b/include/asm-m32r/pgtable-2level.h
@@ -71,8 +71,8 @@
#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
#define PTE_FILE_MAX_BITS 29
-#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0xef) | (((pte_val(pte) >> 10)) << 7))
-#define pgoff_to_pte(off) ((pte_t) { (((off) & 0xef) << 2) | (((off) >> 7) << 10) | _PAGE_FILE })
+#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0x7f) | (((pte_val(pte) >> 10)) << 7))
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7f) << 2) | (((off) >> 7) << 10) | _PAGE_FILE })
#endif /* __KERNEL__ */
#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */
diff --git a/include/asm-m32r/pgtable.h b/include/asm-m32r/pgtable.h
index 8b2a2f1..6604303 100644
--- a/include/asm-m32r/pgtable.h
+++ b/include/asm-m32r/pgtable.h
@@ -366,7 +366,7 @@
#define pte_unmap_nested(pte) do { } while (0)
/* Encode and de-code a swap entry */
-#define __swp_type(x) (((x).val >> 2) & 0x3f)
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
#define __swp_offset(x) ((x).val >> 10)
#define __swp_entry(type, offset) \
((swp_entry_t) { ((type) << 2) | ((offset) << 10) })
diff --git a/include/asm-m32r/poll.h b/include/asm-m32r/poll.h
index 9e0e700..c98509d 100644
--- a/include/asm-m32r/poll.h
+++ b/include/asm-m32r/poll.h
@@ -1,32 +1 @@
-#ifndef _ASM_M32R_POLL_H
-#define _ASM_M32R_POLL_H
-
-/*
- * poll(2) bit definitions. Based on <asm-i386/poll.h>.
- *
- * Modified 2004
- * Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif /* _ASM_M32R_POLL_H */
+#include <asm-generic/poll.h>
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
index f62f5c9..b291b2f 100644
--- a/include/asm-m32r/system.h
+++ b/include/asm-m32r/system.h
@@ -21,12 +21,22 @@
* `next' and `prev' should be struct task_struct, but it isn't always defined
*/
+#if defined(CONFIG_FRAME_POINTER) || \
+ !defined(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER)
+#define M32R_PUSH_FP " push fp\n"
+#define M32R_POP_FP " pop fp\n"
+#else
+#define M32R_PUSH_FP ""
+#define M32R_POP_FP ""
+#endif
+
#define switch_to(prev, next, last) do { \
__asm__ __volatile__ ( \
" seth lr, #high(1f) \n" \
" or3 lr, lr, #low(1f) \n" \
" st lr, @%4 ; store old LR \n" \
" ld lr, @%5 ; load new LR \n" \
+ M32R_PUSH_FP \
" st sp, @%2 ; store old SP \n" \
" ld sp, @%3 ; load new SP \n" \
" push %1 ; store `prev' on new stack \n" \
@@ -34,6 +44,7 @@
" .fillinsn \n" \
"1: \n" \
" pop %0 ; restore `__last' from new stack \n" \
+ M32R_POP_FP \
: "=r" (last) \
: "0" (prev), \
"r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \
diff --git a/include/asm-m68k/atarihw.h b/include/asm-m68k/atarihw.h
index 6211363..ecf007d 100644
--- a/include/asm-m68k/atarihw.h
+++ b/include/asm-m68k/atarihw.h
@@ -2,7 +2,7 @@
** linux/atarihw.h -- This header defines some macros and pointers for
** the various Atari custom hardware registers.
**
-** Copyright 1994 by Bj”rn Brauel
+** Copyright 1994 by Björn Brauel
**
** 5/1/94 Roman Hodek:
** Added definitions for TT specific chips.
diff --git a/include/asm-m68k/atariints.h b/include/asm-m68k/atariints.h
index ce6c445..5748e99 100644
--- a/include/asm-m68k/atariints.h
+++ b/include/asm-m68k/atariints.h
@@ -1,7 +1,7 @@
/*
** atariints.h -- Atari Linux interrupt handling structs and prototypes
**
-** Copyright 1994 by Bj”rn Brauel
+** Copyright 1994 by Björn Brauel
**
** 5/2/94 Roman Hodek:
** TT interrupt definitions added.
diff --git a/include/asm-m68k/poll.h b/include/asm-m68k/poll.h
index 0fb8843..f080fcd 100644
--- a/include/asm-m68k/poll.h
+++ b/include/asm-m68k/poll.h
@@ -1,24 +1,9 @@
#ifndef __m68k_POLL_H
#define __m68k_POLL_H
-#define POLLIN 1
-#define POLLPRI 2
-#define POLLOUT 4
-#define POLLERR 8
-#define POLLHUP 16
-#define POLLNVAL 32
-#define POLLRDNORM 64
#define POLLWRNORM POLLOUT
-#define POLLRDBAND 128
#define POLLWRBAND 256
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
#endif
diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h
index 6a4cf20..5c1264c 100644
--- a/include/asm-m68k/uaccess.h
+++ b/include/asm-m68k/uaccess.h
@@ -361,7 +361,9 @@
long strncpy_from_user(char *dst, const char __user *src, long count);
long strnlen_user(const char __user *src, long n);
-unsigned long clear_user(void __user *to, unsigned long n);
+unsigned long __clear_user(void __user *to, unsigned long n);
+
+#define clear_user __clear_user
#define strlen_user(str) strnlen_user(str, 32767)
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index 62daa74..1b60624 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -689,7 +689,7 @@
}
#define atomic64_cmpxchg(v, o, n) \
- (((__typeof__((v)->counter)))cmpxchg(&((v)->counter), (o), (n)))
+ ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new)))
/**
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index dbf834f..b0c3297 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -119,9 +119,9 @@
*/
#define MACH_GROUP_MOMENCO 12 /* Momentum Boards */
#define MACH_MOMENCO_OCELOT 0
-#define MACH_MOMENCO_OCELOT_G 1
+#define MACH_MOMENCO_OCELOT_G 1 /* no more supported (may 2007) */
#define MACH_MOMENCO_OCELOT_C 2
-#define MACH_MOMENCO_JAGUAR_ATX 3
+#define MACH_MOMENCO_JAGUAR_ATX 3 /* no more supported (may 2007) */
#define MACH_MOMENCO_OCELOT_3 4
/*
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index b414a7d..483685b 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -16,6 +16,7 @@
#include <asm/mipsregs.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
+#include <asm/hazards.h>
#include <asm/bitops.h>
#include <asm/processor.h>
#include <asm/current.h>
@@ -38,34 +39,16 @@
extern void _save_fp(struct task_struct *);
extern void _restore_fp(struct task_struct *);
-#if defined(CONFIG_CPU_SB1)
-#define __enable_fpu_hazard() \
-do { \
- asm(".set push \n\t" \
- ".set mips64 \n\t" \
- ".set noreorder \n\t" \
- "ssnop \n\t" \
- "bnezl $0, .+4 \n\t" \
- "ssnop \n\t" \
- ".set pop"); \
-} while (0)
-#else
-#define __enable_fpu_hazard() \
-do { \
- asm("nop;nop;nop;nop"); /* max. hazard */ \
-} while (0)
-#endif
-
#define __enable_fpu() \
do { \
set_c0_status(ST0_CU1); \
- __enable_fpu_hazard(); \
+ enable_fpu_hazard(); \
} while (0)
#define __disable_fpu() \
do { \
clear_c0_status(ST0_CU1); \
- /* We don't care about the c0 hazard here */ \
+ disable_fpu_hazard(); \
} while (0)
#define enable_fpu() \
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index e50c77e..d9119f4 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -178,4 +178,36 @@
#endif
+
+/* FPU hazards */
+
+#if defined(CONFIG_CPU_SB1)
+ASMMACRO(enable_fpu_hazard,
+ .set push;
+ .set mips64;
+ .set noreorder;
+ _ssnop;
+ bnezl $0,.+4;
+ _ssnop;
+ .set pop
+)
+ASMMACRO(disable_fpu_hazard,
+)
+
+#elif defined(CONFIG_CPU_MIPSR2)
+ASMMACRO(enable_fpu_hazard,
+ _ehb
+)
+ASMMACRO(disable_fpu_hazard,
+ _ehb
+)
+#else
+ASMMACRO(enable_fpu_hazard,
+ nop; nop; nop; nop
+)
+ASMMACRO(disable_fpu_hazard,
+ _ehb
+)
+#endif
+
#endif /* _ASM_HAZARDS_H */
diff --git a/include/asm-mips/highmem.h b/include/asm-mips/highmem.h
index f8c8182..4d6bd5c 100644
--- a/include/asm-mips/highmem.h
+++ b/include/asm-mips/highmem.h
@@ -48,46 +48,6 @@
extern void * kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
-/*
- * CONFIG_LIMITED_DMA is for systems with DMA limitations such as Momentum's
- * Jaguar ATX. This option exploits the highmem code in the kernel so is
- * always enabled together with CONFIG_HIGHMEM but at this time doesn't
- * actually add highmem functionality.
- */
-
-#ifdef CONFIG_LIMITED_DMA
-
-/*
- * These are the default functions for the no-highmem case from
- * <linux/highmem.h>
- */
-static inline void *kmap(struct page *page)
-{
- might_sleep();
- return page_address(page);
-}
-
-#define kunmap(page) do { (void) (page); } while (0)
-
-static inline void *kmap_atomic(struct page *page, enum km_type type)
-{
- pagefault_disable();
- return page_address(page);
-}
-
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
- pagefault_enable();
-}
-
-#define kmap_atomic_pfn(pfn, idx) kmap_atomic(pfn_to_page(pfn), (idx))
-
-#define kmap_atomic_to_page(ptr) virt_to_page(ptr)
-
-#define flush_cache_kmaps() do { } while (0)
-
-#else /* LIMITED_DMA */
-
extern void *__kmap(struct page *page);
extern void __kunmap(struct page *page);
extern void *__kmap_atomic(struct page *page, enum km_type type);
@@ -103,8 +63,6 @@
#define flush_cache_kmaps() flush_cache_all()
-#endif /* LIMITED_DMA */
-
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
index 24a8d51..684a501 100644
--- a/include/asm-mips/mach-cobalt/cobalt.h
+++ b/include/asm-mips/mach-cobalt/cobalt.h
@@ -69,6 +69,8 @@
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
+extern int cobalt_board_id;
+
#define PCI_CFG_SET(devfn,where) \
GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) | \
(PCI_FUNC (devfn) << 8) | (where)))
diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h
deleted file mode 100644
index 84b6dea..0000000
--- a/include/asm-mips/mach-ja/cpu-feature-overrides.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Momentum Jaguar ATX always has the RM9000 processor.
- */
-#define cpu_has_watch 1
-#define cpu_has_mips16 0
-#define cpu_has_divec 0
-#define cpu_has_vce 0
-#define cpu_has_cache_cdex_p 0
-#define cpu_has_cache_cdex_s 0
-#define cpu_has_prefetch 1
-#define cpu_has_mcheck 0
-#define cpu_has_ejtag 0
-
-#define cpu_has_llsc 1
-#define cpu_has_vtag_icache 0
-#define cpu_has_dc_aliases 0
-#define cpu_has_ic_fills_f_dc 0
-#define cpu_has_dsp 0
-#define cpu_icache_snoops_remote_store 0
-
-#define cpu_has_nofpuex 0
-#define cpu_has_64bits 1
-
-#define cpu_has_inclusive_pcaches 0
-
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 32
-#define cpu_scache_line_size() 32
-
-#define cpu_has_mips32r1 0
-#define cpu_has_mips32r2 0
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ja/spaces.h b/include/asm-mips/mach-ja/spaces.h
deleted file mode 100644
index 8466a0e..0000000
--- a/include/asm-mips/mach-ja/spaces.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
- * Copyright (C) 2000, 2002 Maciej W. Rozycki
- * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
- */
-#ifndef __ASM_MACH_JA_SPACES_H
-#define __ASM_MACH_JA_SPACES_H
-
-/*
- * Memory above this physical address will be considered highmem.
- */
-#define HIGHMEM_START 0x08000000UL
-
-#include_next <spaces.h>
-
-#endif /* __ASM_MACH_JA_SPACES_H */
diff --git a/include/asm-mips/mips-boards/malta.h b/include/asm-mips/mips-boards/malta.h
index b0ba3c5..eec9100 100644
--- a/include/asm-mips/mips-boards/malta.h
+++ b/include/asm-mips/mips-boards/malta.h
@@ -25,6 +25,10 @@
#include <asm/mips-boards/msc01_pci.h>
#include <asm/gt64120.h>
+/* Mips interrupt controller found in SOCit variations */
+#define MIPS_MSC01_IC_REG_BASE 0x1bc40000
+#define MIPS_SOCITSC_IC_REG_BASE 0x1ffa0000
+
/*
* Malta I/O ports base address for the Galileo GT64120 and Algorithmics
* Bonito system controllers.
diff --git a/include/asm-mips/msc01_ic.h b/include/asm-mips/msc01_ic.h
index aa7ad9a..7989b9f 100644
--- a/include/asm-mips/msc01_ic.h
+++ b/include/asm-mips/msc01_ic.h
@@ -94,10 +94,7 @@
/*
* MIPS System controller interrupt register base.
*
- * FIXME - are these macros specific to Malta and co or to the MSC? If the
- * latter, they should be moved elsewhere.
*/
-#define MIPS_MSC01_IC_REG_BASE 0x1bc40000
/*****************************************************************************
* Absolute register addresses
@@ -144,7 +141,7 @@
#define MSC01_IRQ_LEVEL 0
#define MSC01_IRQ_EDGE 1
-extern void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq);
+extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq);
extern void ll_msc_irq(void);
#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index d3fbd83..5c3239d 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -190,10 +190,6 @@
#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
-#ifdef CONFIG_LIMITED_DMA
-#define WANT_PAGE_VIRTUAL
-#endif
-
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
diff --git a/include/asm-mips/poll.h b/include/asm-mips/poll.h
index 70881f8..47b9520 100644
--- a/include/asm-mips/poll.h
+++ b/include/asm-mips/poll.h
@@ -1,28 +1,9 @@
#ifndef __ASM_POLL_H
#define __ASM_POLL_H
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
#define POLLWRNORM POLLOUT
#define POLLWRBAND 0x0100
-/* These seem to be more or less nonstandard ... */
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
#endif /* __ASM_POLL_H */
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index d7a6513..ce51213 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -81,25 +81,6 @@
#define STD_SERIAL_PORT_DEFNS
#endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
-#ifdef CONFIG_MOMENCO_JAGUAR_ATX
-/* Ordinary NS16552 duart with a 20MHz crystal. */
-#define JAGUAR_ATX_UART_CLK 20000000
-#define JAGUAR_ATX_BASE_BAUD (JAGUAR_ATX_UART_CLK / 16)
-
-#define JAGUAR_ATX_SERIAL1_IRQ 6
-#define JAGUAR_ATX_SERIAL1_BASE 0xfd000023L
-
-#define _JAGUAR_ATX_SERIAL_INIT(int, base) \
- { .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int, \
- .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
- .iomem_base = (u8 *) base, iomem_reg_shift: 2, \
- io_type: SERIAL_IO_MEM }
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS \
- _JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
-#else
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_MOMENCO_OCELOT_3
#define OCELOT_3_BASE_BAUD ( 20000000 / 16 )
#define OCELOT_3_SERIAL_IRQ 6
@@ -134,27 +115,6 @@
#define MOMENCO_OCELOT_SERIAL_PORT_DEFNS
#endif
-#ifdef CONFIG_MOMENCO_OCELOT_G
-/* Ordinary NS16552 duart with a 20MHz crystal. */
-#define OCELOT_G_BASE_BAUD ( 20000000 / 16 )
-
-#define OCELOT_G_SERIAL1_IRQ 4
-#if 0
-#define OCELOT_G_SERIAL1_BASE 0xe0001020
-#else
-#define OCELOT_G_SERIAL1_BASE 0xfd000020
-#endif
-
-#define _OCELOT_G_SERIAL_INIT(int, base) \
- { .baud_base = OCELOT_G_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS,\
- .iomem_base = (u8 *) base, .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM }
-#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
- _OCELOT_G_SERIAL_INIT(OCELOT_G_SERIAL1_IRQ, OCELOT_G_SERIAL1_BASE)
-#else
-#define MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_MOMENCO_OCELOT_C
/* Ordinary NS16552 duart with a 20MHz crystal. */
#define OCELOT_C_BASE_BAUD ( 20000000 / 16 )
@@ -210,7 +170,6 @@
IP32_SERIAL_PORT_DEFNS \
JAZZ_SERIAL_PORT_DEFNS \
STD_SERIAL_PORT_DEFNS \
- MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_C_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_SERIAL_PORT_DEFNS \
MOMENCO_OCELOT_3_SERIAL_PORT_DEFNS
diff --git a/include/asm-mips/sgi/seeq.h b/include/asm-mips/sgi/seeq.h
new file mode 100644
index 0000000..af0ffd7
--- /dev/null
+++ b/include/asm-mips/sgi/seeq.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_SEEQ_H
+#define __ASM_SGI_SEEQ_H
+
+#include <linux/if_ether.h>
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiseeq_platform_data {
+ struct hpc3_regs *hpc;
+ unsigned int irq;
+ unsigned char mac[ETH_ALEN];
+};
+
+#endif /* __ASM_SGI_SEEQ_H */
diff --git a/include/asm-mips/sgi/wd.h b/include/asm-mips/sgi/wd.h
new file mode 100644
index 0000000..0d6c3a4
--- /dev/null
+++ b/include/asm-mips/sgi/wd.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_WD_H
+#define __ASM_SGI_WD_H
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiwd93_platform_data {
+ unsigned int unit;
+ unsigned int irq;
+ struct hpc3_scsiregs *hregs;
+ unsigned char *wdregs;
+};
+
+#endif /* __ASM_SGI_WD_H */
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 3713d25..bb0b289 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -464,7 +464,10 @@
extern void set_handler (unsigned long offset, void *addr, unsigned long len);
extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len);
-extern void *set_vi_handler (int n, void *addr);
+
+typedef void (*vi_handler_t)(void);
+extern void *set_vi_handler (int n, vi_handler_t addr);
+
extern void *set_except_vector(int n, void *addr);
extern unsigned long ebase;
extern void per_cpu_trap_init(void);
diff --git a/include/asm-parisc/poll.h b/include/asm-parisc/poll.h
index 20e4d03..c98509d 100644
--- a/include/asm-parisc/poll.h
+++ b/include/asm-parisc/poll.h
@@ -1,27 +1 @@
-#ifndef __PARISC_POLL_H
-#define __PARISC_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h
index 9e4dd98..a7b60bf 100644
--- a/include/asm-powerpc/hw_irq.h
+++ b/include/asm-powerpc/hw_irq.h
@@ -48,8 +48,15 @@
#define irqs_disabled() (local_get_flags() == 0)
-#define hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
-#define hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
+#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
+#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
+
+#define hard_irq_disable() \
+ do { \
+ __hard_irq_disable(); \
+ get_paca()->soft_enabled = 0; \
+ get_paca()->hard_enabled = 0; \
+ } while(0)
#else
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index e2ca55b..b8dca30 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -73,8 +73,9 @@
#define HPTES_PER_GROUP 8
+#define HPTE_V_SSIZE_SHIFT 62
#define HPTE_V_AVPN_SHIFT 7
-#define HPTE_V_AVPN ASM_CONST(0xffffffffffffff80)
+#define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80)
#define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & HPTE_V_AVPN))
#define HPTE_V_BOLTED ASM_CONST(0x0000000000000010)
@@ -151,6 +152,15 @@
#define MMU_PAGE_16G 5 /* 16G */
#define MMU_PAGE_COUNT 6
+/*
+ * Segment sizes.
+ * These are the values used by hardware in the B field of
+ * SLB entries and the first dword of MMU hashtable entries.
+ * The B field is 2 bits; the values 2 and 3 are unused and reserved.
+ */
+#define MMU_SEGSIZE_256M 0
+#define MMU_SEGSIZE_1T 1
+
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-powerpc/mmzone.h b/include/asm-powerpc/mmzone.h
index d484ca9..19f299b 100644
--- a/include/asm-powerpc/mmzone.h
+++ b/include/asm-powerpc/mmzone.h
@@ -43,9 +43,5 @@
#endif /* CONFIG_NEED_MULTIPLE_NODES */
-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int __init early_pfn_to_nid(unsigned long pfn);
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_MMZONE_H_ */
diff --git a/include/asm-powerpc/poll.h b/include/asm-powerpc/poll.h
index 9c7d126..c98509d 100644
--- a/include/asm-powerpc/poll.h
+++ b/include/asm-powerpc/poll.h
@@ -1,24 +1 @@
-#ifndef _ASM_POWERPC_POLL_H
-#define _ASM_POWERPC_POLL_H
-
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif /* _ASM_POWERPC_POLL_H */
+#include <asm-generic/poll.h>
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index 6dcd7a8..8e20051 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -62,11 +62,14 @@
/**
* eeh_slot_error_detail -- record and EEH error condition to the log
- * @severity: 1 if temporary, 2 if permanent failure.
+ * @pdn: pci device node
+ * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
*
* Obtains the EEH error details from the RTAS subsystem,
* and then logs these details with the RTAS error log system.
*/
+#define EEH_LOG_TEMP_FAILURE 1
+#define EEH_LOG_PERM_FAILURE 2
void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
/**
@@ -82,6 +85,7 @@
/**
* rtas_set_slot_reset -- unfreeze a frozen slot
+ * @pdn: pci device node
*
* Clear the EEH-frozen condition on a slot. This routine
* does this by asserting the PCI #RST line for 1/8th of
@@ -95,6 +99,7 @@
/**
* eeh_restore_bars - Restore device configuration info.
+ * @pdn: pci device node
*
* A reset of a PCI device will clear out its config space.
* This routines will restore the config space for this
@@ -105,6 +110,7 @@
/**
* rtas_configure_bridge -- firmware initialization of pci bridge
+ * @pdn: pci device node
*
* Ask the firmware to configure all PCI bridges devices
* located behind the indicated node. Required after a
@@ -118,16 +124,22 @@
int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
/**
+ * eeh_mark_slot -- set mode flags for pertition endpoint
+ * @pdn: pci device node
+ *
* mark and clear slots: find "partition endpoint" PE and set or
* clear the flags for each subnode of the PE.
*/
void eeh_mark_slot (struct device_node *dn, int mode_flag);
void eeh_clear_slot (struct device_node *dn, int mode_flag);
-/* Find the associated "Partiationable Endpoint" PE */
+/**
+ * find_device_pe -- Find the associated "Partiationable Endpoint" PE
+ * @pdn: pci device node
+ */
struct device_node * find_device_pe(struct device_node *dn);
-#endif
+#endif /* CONFIG_EEH */
#else /* CONFIG_PCI */
static inline void find_and_init_phbs(void) { }
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 13c372d..1e04651 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -377,8 +377,13 @@
/* system manager */
+#ifdef CONFIG_PS3_SYS_MANAGER
void ps3_sys_manager_restart(void);
void ps3_sys_manager_power_off(void);
+#else
+static inline void ps3_sys_manager_restart(void) {}
+static inline void ps3_sys_manager_power_off(void) {}
+#endif
struct ps3_prealloc {
const char *name;
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index a62168ec..9d304b1 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -38,11 +38,11 @@
void qe_setbrg(u32 brg, u32 rate);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
-u32 qe_muram_alloc(u32 size, u32 align);
-int qe_muram_free(u32 offset);
-u32 qe_muram_alloc_fixed(u32 offset, u32 size);
+unsigned long qe_muram_alloc(int size, int align);
+int qe_muram_free(unsigned long offset);
+unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
void qe_muram_dump(void);
-void *qe_muram_addr(u32 offset);
+void *qe_muram_addr(unsigned long offset);
/* Buffer descriptors */
struct qe_bd {
@@ -448,10 +448,5 @@
#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02
#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01
-static inline long IS_MURAM_ERR(const u32 offset)
-{
- return offset > (u32) - 1000L;
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_QE_H */
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
new file mode 100644
index 0000000..064405c
--- /dev/null
+++ b/include/asm-powerpc/reg_booke.h
@@ -0,0 +1,469 @@
+/*
+ * Contains register definitions common to the Book E PowerPC
+ * specification. Notice that while the IBM-40x series of CPUs
+ * are not true Book E PowerPCs, they borrowed a number of features
+ * before Book E was finalized, and are included here as well. Unfortunatly,
+ * they sometimes used different locations than true Book E CPUs did.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_BOOKE_H__
+#define __ASM_POWERPC_REG_BOOKE_H__
+
+#ifndef __ASSEMBLY__
+/* Performance Monitor Registers */
+#define mfpmr(rn) ({unsigned int rval; \
+ asm volatile("mfpmr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
+#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
+#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
+#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
+#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
+#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
+#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+
+#define PMLCA_FC 0x80000000 /* Freeze Counter */
+#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
+#define PMLCA_FCU 0x20000000 /* Freeze in User */
+#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
+#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
+#define PMLCA_CE 0x04000000 /* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
+#define PMLCA_EVENT_SHIFT 16
+
+#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
+#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
+#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
+#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT 8
+
+#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT 0
+
+#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
+
+#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
+#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
+#define PMGC0_FCECE 0x20000000 /* Freeze countes on
+ Enabled Condition or
+ Event */
+
+#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
+#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
+#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
+#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
+#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
+#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
+#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
+
+
+/* Machine State Register (MSR) Fields */
+#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
+#define MSR_SPE (1<<25) /* Enable SPE */
+#define MSR_DWE (1<<10) /* Debug Wait Enable */
+#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
+#define MSR_IS MSR_IR /* Instruction Space */
+#define MSR_DS MSR_DR /* Data Space */
+#define MSR_PMM (1<<2) /* Performance monitor mark bit */
+
+/* Default MSR for kernel mode. */
+#if defined (CONFIG_40x)
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
+#elif defined(CONFIG_BOOKE)
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
+#endif
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
+#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
+#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
+#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
+#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
+#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
+#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */
+#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
+#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
+#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
+#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
+#define SPRN_MCSR 0x23C /* Machine Check Status Register */
+#define SPRN_MCAR 0x23D /* Machine Check Address Register */
+#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */
+#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
+#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
+#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
+#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
+#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
+#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
+#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
+#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
+#define SPRN_MAS7 0x3b0 /* MMU Assist Register 7 */
+#define SPRN_PID1 0x279 /* Process ID Register 1 */
+#define SPRN_PID2 0x27A /* Process ID Register 2 */
+#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
+#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
+#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
+#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
+#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
+#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
+#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
+#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
+#define SPRN_SLER 0x3BB /* Little-endian real mode */
+#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */
+#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
+#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
+#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
+#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
+#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
+#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
+#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
+#define SPRN_SVR 0x3FF /* System Version Register */
+
+/*
+ * SPRs which have conflicting definitions on true Book E versus classic,
+ * or IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID 0x030 /* Process ID */
+#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
+#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
+#define SPRN_DEAR 0x03D /* Data Error Address Register */
+#define SPRN_ESR 0x03E /* Exception Syndrome Register */
+#define SPRN_PIR 0x11E /* Processor Identification Register */
+#define SPRN_DBSR 0x130 /* Debug Status Register */
+#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */
+#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */
+#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */
+#define SPRN_DAC1 0x13C /* Data Address Compare 1 */
+#define SPRN_DAC2 0x13D /* Data Address Compare 2 */
+#define SPRN_TSR 0x150 /* Timer Status Register */
+#define SPRN_TCR 0x154 /* Timer Control Register */
+#endif /* Book E */
+#ifdef CONFIG_40x
+#define SPRN_PID 0x3B1 /* Process ID */
+#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
+#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
+#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
+#define SPRN_TSR 0x3D8 /* Timer Status Register */
+#define SPRN_TCR 0x3DA /* Timer Control Register */
+#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
+#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
+#define SPRN_DBSR 0x3F0 /* Debug Status Register */
+#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
+#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
+#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
+#endif
+
+/* Bit definitions for CCR1. */
+#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
+#define CCR1_TCS 0x00000080 /* Timer Clock Select */
+
+/* Bit definitions for the MCSR. */
+#ifdef CONFIG_440A
+#define MCSR_MCS 0x80000000 /* Machine Check Summary */
+#define MCSR_IB 0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
+#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
+#endif
+#ifdef CONFIG_E500
+#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
+#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
+#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
+#define MCSR_GL_CI 0x00010000UL /* Guarded Load or Cache-Inhibited stwcx. */
+#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
+#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */
+#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */
+#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */
+#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */
+#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */
+#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
+#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
+#endif
+#ifdef CONFIG_E200
+#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
+#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */
+#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */
+#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
+ fetch for an exception handler */
+#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/
+#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */
+#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered
+ store or cache line push */
+#endif
+
+/* Bit definitions for the DBSR. */
+/*
+ * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define DBSR_IC 0x08000000 /* Instruction Completion */
+#define DBSR_BT 0x04000000 /* Branch Taken */
+#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
+#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
+#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
+#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */
+#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */
+#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */
+#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
+#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
+#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
+#endif
+#ifdef CONFIG_40x
+#define DBSR_IC 0x80000000 /* Instruction Completion */
+#define DBSR_BT 0x40000000 /* Branch taken */
+#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
+#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
+#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
+#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */
+#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */
+#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */
+#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */
+#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */
+#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */
+#endif
+
+/* Bit definitions related to the ESR. */
+#define ESR_MCI 0x80000000 /* Machine Check - Instruction */
+#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
+#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
+#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
+#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
+#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
+#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PTR 0x02000000 /* Program Exception - Trap */
+#define ESR_FP 0x01000000 /* Floating Point Operation */
+#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
+#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
+#define ESR_ST 0x00800000 /* Store Operation */
+#define ESR_DLK 0x00200000 /* Data Cache Locking */
+#define ESR_ILK 0x00100000 /* Instr. Cache Locking */
+#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */
+#define ESR_BO 0x00020000 /* Byte Ordering */
+
+/* Bit definitions related to the DBCR0. */
+#define DBCR0_EDM 0x80000000 /* External Debug Mode */
+#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
+#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
+#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
+#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
+#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
+#define DBCR0_RST_NONE 0x00000000 /* No Reset */
+#define DBCR0_IC 0x08000000 /* Instruction Completion */
+#define DBCR0_BT 0x04000000 /* Branch Taken */
+#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
+#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
+#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
+#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
+#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
+#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
+#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
+#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
+#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
+#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
+#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
+#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
+#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
+
+/* Bit definitions related to the TCR. */
+#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
+#define TCR_WP_MASK TCR_WP(3)
+#define WP_2_17 0 /* 2^17 clocks */
+#define WP_2_21 1 /* 2^21 clocks */
+#define WP_2_25 2 /* 2^25 clocks */
+#define WP_2_29 3 /* 2^29 clocks */
+#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
+#define TCR_WRC_MASK TCR_WRC(3)
+#define WRC_NONE 0 /* No reset will occur */
+#define WRC_CORE 1 /* Core reset will occur */
+#define WRC_CHIP 2 /* Chip reset will occur */
+#define WRC_SYSTEM 3 /* System reset will occur */
+#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
+#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
+#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */
+#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
+#define TCR_FP_MASK TCR_FP(3)
+#define FP_2_9 0 /* 2^9 clocks */
+#define FP_2_13 1 /* 2^13 clocks */
+#define FP_2_17 2 /* 2^17 clocks */
+#define FP_2_21 3 /* 2^21 clocks */
+#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
+#define TCR_ARE 0x00400000 /* Auto Reload Enable */
+
+/* Bit definitions for the TSR. */
+#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
+#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
+#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
+#define WRS_NONE 0 /* No WDT reset occurred */
+#define WRS_CORE 1 /* WDT forced core reset */
+#define WRS_CHIP 2 /* WDT forced chip reset */
+#define WRS_SYSTEM 3 /* WDT forced system reset */
+#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
+#define TSR_DIS TSR_PIS /* DEC Interrupt Status */
+#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
+
+/* Bit definitions for the DCCR. */
+#define DCCR_NOCACHE 0 /* Noncacheable */
+#define DCCR_CACHE 1 /* Cacheable */
+
+/* Bit definitions for DCWR. */
+#define DCWR_COPY 0 /* Copy-back */
+#define DCWR_WRITE 1 /* Write-through */
+
+/* Bit definitions for ICCR. */
+#define ICCR_NOCACHE 0 /* Noncacheable */
+#define ICCR_CACHE 1 /* Cacheable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */
+#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
+#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */
+#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
+
+/* Bit definitions for L1CSR1. */
+#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */
+#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
+#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
+
+/* Bit definitions for SGR. */
+#define SGR_NORMAL 0 /* Speculative fetching allowed. */
+#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
+#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
+#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
+#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
+#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
+#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
+#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
+#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
+#define SPEFSCR_OV 0x00004000 /* Integer overflow */
+#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
+#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
+#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
+#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
+#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
+#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
+#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
+
+/*
+ * The IBM-403 is an even more odd special case, as it is much
+ * older than the IBM-405 series. We put these down here incase someone
+ * wishes to support these machines again.
+ */
+#ifdef CONFIG_403GCX
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
+#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
+#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
+#define SPRN_TBHI 0x3DC /* Time Base High */
+#define SPRN_TBLO 0x3DD /* Time Base Low */
+#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
+#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
+#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
+#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
+#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
+
+
+/* Bit definitions for the DBCR. */
+#define DBCR_EDM DBCR0_EDM
+#define DBCR_IDM DBCR0_IDM
+#define DBCR_RST(x) (((x) & 0x3) << 28)
+#define DBCR_RST_NONE 0
+#define DBCR_RST_CORE 1
+#define DBCR_RST_CHIP 2
+#define DBCR_RST_SYSTEM 3
+#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */
+#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */
+#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */
+#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */
+#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
+#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
+#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
+#define DAC_BYTE 0
+#define DAC_HALF 1
+#define DAC_WORD 2
+#define DAC_QUAD 3
+#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
+#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
+#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
+#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
+#define DBCR_SIA 0x00000008 /* Second IAC Enable */
+#define DBCR_SDA 0x00000004 /* Second DAC Enable */
+#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
+#endif /* 403GCX */
+#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/rheap.h b/include/asm-powerpc/rheap.h
similarity index 74%
rename from include/asm-ppc/rheap.h
rename to include/asm-powerpc/rheap.h
index 39a10d8..1723817 100644
--- a/include/asm-ppc/rheap.h
+++ b/include/asm-powerpc/rheap.h
@@ -18,7 +18,7 @@
typedef struct _rh_block {
struct list_head list;
- void *start;
+ unsigned long start;
int size;
const char *owner;
} rh_block_t;
@@ -37,8 +37,8 @@
#define RHIF_STATIC_INFO 0x1
#define RHIF_STATIC_BLOCK 0x2
-typedef struct rh_stats_t {
- void *start;
+typedef struct _rh_stats {
+ unsigned long start;
int size;
const char *owner;
} rh_stats_t;
@@ -57,24 +57,24 @@
rh_block_t * block);
/* Attach a free region to manage */
-extern int rh_attach_region(rh_info_t * info, void *start, int size);
+extern int rh_attach_region(rh_info_t * info, unsigned long start, int size);
/* Detach a free region */
-extern void *rh_detach_region(rh_info_t * info, void *start, int size);
+extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size);
/* Allocate the given size from the remote heap (with alignment) */
-extern void *rh_alloc_align(rh_info_t * info, int size, int alignment,
+extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment,
const char *owner);
/* Allocate the given size from the remote heap */
-extern void *rh_alloc(rh_info_t * info, int size, const char *owner);
+extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner);
/* Allocate the given size from the given address */
-extern void *rh_alloc_fixed(rh_info_t * info, void *start, int size,
+extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size,
const char *owner);
/* Free the allocated area */
-extern int rh_free(rh_info_t * info, void *start);
+extern int rh_free(rh_info_t * info, unsigned long start);
/* Get stats for debugging purposes */
extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
@@ -84,6 +84,6 @@
extern void rh_dump(rh_info_t * info);
/* Set owner of taken block */
-extern int rh_set_owner(rh_info_t * info, void *start, const char *owner);
+extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner);
#endif /* __ASM_PPC_RHEAP_H__ */
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index 0b00068..3d44446 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -307,3 +307,4 @@
COMPAT_SYS_SPU(move_pages)
SYSCALL_SPU(getcpu)
COMPAT_SYS(epoll_pwait)
+COMPAT_SYS_SPU(utimensat)
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 2baedbe..21f004a 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -326,10 +326,11 @@
#define __NR_move_pages 301
#define __NR_getcpu 302
#define __NR_epoll_pwait 303
+#define __NR_utimensat 304
#ifdef __KERNEL__
-#define __NR_syscalls 304
+#define __NR_syscalls 305
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
index 4f99df1..3972487 100644
--- a/include/asm-ppc/commproc.h
+++ b/include/asm-ppc/commproc.h
@@ -63,20 +63,15 @@
#define CPM_DATAONLY_SIZE ((uint)0x0700)
#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-static inline long IS_DPERR(const uint offset)
-{
- return (uint)offset > (uint)-1000L;
-}
-
/* Export the base address of the communication processor registers
* and dual port ram.
*/
extern cpm8xx_t *cpmp; /* Pointer to comm processor */
-extern uint cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(uint offset);
-extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align);
+extern unsigned long cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(unsigned long offset);
+extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(uint offset);
+extern void *cpm_dpram_addr(unsigned long offset);
extern uint cpm_dpram_phys(u8* addr);
extern void cpm_setbrg(uint brg, uint rate);
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index 220cc2d..12a2860 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -104,21 +104,16 @@
*/
#define NUM_CPM_HOST_PAGES 2
-static inline long IS_DPERR(const uint offset)
-{
- return (uint)offset > (uint)-1000L;
-}
-
/* Export the base address of the communication processor registers
* and dual port ram.
*/
extern cpm_cpm2_t *cpmp; /* Pointer to comm processor */
-extern uint cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(uint offset);
-extern uint cpm_dpalloc_fixed(uint offset, uint size, uint align);
+extern unsigned long cpm_dpalloc(uint size, uint align);
+extern int cpm_dpfree(unsigned long offset);
+extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(uint offset);
+extern void *cpm_dpram_addr(unsigned long offset);
extern void cpm_setbrg(uint brg, uint rate);
extern void cpm2_fastbrg(uint brg, uint rate, int div16);
extern void cpm2_reset(void);
diff --git a/include/asm-s390/ccwdev.h b/include/asm-s390/ccwdev.h
index 6795ece..4c2e171 100644
--- a/include/asm-s390/ccwdev.h
+++ b/include/asm-s390/ccwdev.h
@@ -16,6 +16,7 @@
/* structs from asm/cio.h */
struct irb;
struct ccw1;
+struct ccw_dev_id;
/* simplified initializers for struct ccw_device:
* CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one
@@ -175,6 +176,7 @@
extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);
extern __u8 ccw_device_get_path_mask(struct ccw_device *);
+extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
#define get_ccwdev_lock(x) (x)->ccwlock
@@ -184,7 +186,6 @@
extern struct ccw_device *ccw_device_probe_console(void);
// FIXME: these have to go
-extern int _ccw_device_get_device_number(struct ccw_device *);
extern int _ccw_device_get_subchannel_number(struct ccw_device *);
extern void *ccw_device_get_chp_desc(struct ccw_device *, int);
diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h
index bdcd448..2c40fd3 100644
--- a/include/asm-s390/ipl.h
+++ b/include/asm-s390/ipl.h
@@ -79,8 +79,8 @@
* IPL validity flags
*/
extern u32 ipl_flags;
-
extern u32 dump_prefix_page;
+extern unsigned int zfcpdump_prefix_array[];
extern void do_reipl(void);
extern void ipl_save_parameters(void);
diff --git a/include/asm-s390/param.h b/include/asm-s390/param.h
index 085a7e2..34aaa46 100644
--- a/include/asm-s390/param.h
+++ b/include/asm-s390/param.h
@@ -10,7 +10,7 @@
#define _ASMS390_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff --git a/include/asm-s390/poll.h b/include/asm-s390/poll.h
index 6f7f65a..c98509d 100644
--- a/include/asm-s390/poll.h
+++ b/include/asm-s390/poll.h
@@ -1,35 +1 @@
-/*
- * include/asm-s390/poll.h
- *
- * S390 version
- *
- * Derived from "include/asm-i386/poll.h"
- */
-
-#ifndef __S390_POLL_H
-#define __S390_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-sh/poll.h b/include/asm-sh/poll.h
index dbca9b3..c98509d 100644
--- a/include/asm-sh/poll.h
+++ b/include/asm-sh/poll.h
@@ -1,27 +1 @@
-#ifndef __ASM_SH_POLL_H
-#define __ASM_SH_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif /* __ASM_SH_POLL_H */
+#include <asm-generic/poll.h>
diff --git a/include/asm-sh64/poll.h b/include/asm-sh64/poll.h
index 3a6cbad..ca29502 100644
--- a/include/asm-sh64/poll.h
+++ b/include/asm-sh64/poll.h
@@ -1,37 +1,8 @@
#ifndef __ASM_SH64_POLL_H
#define __ASM_SH64_POLL_H
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/poll.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- */
+#include <asm-generic/poll.h>
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#undef POLLREMOVE
#endif /* __ASM_SH64_POLL_H */
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
index 404d807..631f15f 100644
--- a/include/asm-sparc/kdebug.h
+++ b/include/asm-sparc/kdebug.h
@@ -58,6 +58,10 @@
sp_enter_debugger(); \
} while(0)
+enum die_val {
+ DIE_UNUSED,
+};
+
#endif /* !(__ASSEMBLY__) */
/* Some nice offset defines for assembler code. */
@@ -66,8 +70,4 @@
#define KDEBUG_DUNNO2_OFF 0x8
#define KDEBUG_TEACH_OFF 0xc
-enum die_val {
- DIE_UNUSED,
-};
-
#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/include/asm-sparc/poll.h b/include/asm-sparc/poll.h
index 26f13fb..091d3ad 100644
--- a/include/asm-sparc/poll.h
+++ b/include/asm-sparc/poll.h
@@ -1,24 +1,12 @@
#ifndef __SPARC_POLL_H
#define __SPARC_POLL_H
-#define POLLIN 1
-#define POLLPRI 2
-#define POLLOUT 4
-#define POLLERR 8
-#define POLLHUP 16
-#define POLLNVAL 32
-#define POLLRDNORM 64
#define POLLWRNORM POLLOUT
-#define POLLRDBAND 128
#define POLLWRBAND 256
#define POLLMSG 512
#define POLLREMOVE 1024
#define POLLRDHUP 2048
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
#endif
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
index 8b6d9c9..8b4e23b 100644
--- a/include/asm-sparc/system.h
+++ b/include/asm-sparc/system.h
@@ -11,6 +11,7 @@
#include <asm/psr.h>
#include <asm/ptrace.h>
#include <asm/btfixup.h>
+#include <asm/smp.h>
#ifndef __ASSEMBLY__
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index da9bdc5..64471bc 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -327,8 +327,11 @@
#define __NR_getcpu 308
#define __NR_epoll_pwait 309
#define __NR_utimensat 310
+#define __NR_signalfd 311
+#define __NR_timerfd 312
+#define __NR_eventfd 313
-#define NR_SYSCALLS 311
+#define NR_SYSCALLS 314
#ifdef __KERNEL__
#define __ARCH_WANT_IPC_PARSE_VERSION
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
index 2f858a2..9329429 100644
--- a/include/asm-sparc64/dma-mapping.h
+++ b/include/asm-sparc64/dma-mapping.h
@@ -10,10 +10,13 @@
/* need struct page definitions */
#include <linux/mm.h>
+#include <asm/of_device.h>
+
static inline int
dma_supported(struct device *dev, u64 mask)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
return pci_dma_supported(to_pci_dev(dev), mask);
}
@@ -21,7 +24,8 @@
static inline int
dma_set_mask(struct device *dev, u64 dma_mask)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
}
@@ -30,7 +34,8 @@
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
gfp_t flag)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
return pci_iommu_ops->alloc_consistent(to_pci_dev(dev), size, dma_handle, flag);
}
@@ -39,7 +44,8 @@
dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
}
@@ -48,7 +54,8 @@
dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
}
@@ -57,7 +64,8 @@
dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
}
@@ -67,7 +75,8 @@
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
}
@@ -76,7 +85,8 @@
dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
}
@@ -85,7 +95,8 @@
dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
}
@@ -94,7 +105,8 @@
dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
}
@@ -103,7 +115,8 @@
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
size, (int)direction);
@@ -113,7 +126,8 @@
dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
size, (int)direction);
@@ -123,7 +137,8 @@
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
}
@@ -132,7 +147,8 @@
dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
- BUG_ON(dev->bus != &pci_bus_type);
+ BUG_ON(dev->bus != &pci_bus_type &&
+ dev->bus != &ebus_bus_type);
pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
}
diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
index e01b805..26ec046 100644
--- a/include/asm-sparc64/openprom.h
+++ b/include/asm-sparc64/openprom.h
@@ -177,7 +177,7 @@
/* More fun PROM structures for device probing. */
#define PROMREG_MAX 24
#define PROMVADDR_MAX 16
-#define PROMINTR_MAX 15
+#define PROMINTR_MAX 32
struct linux_prom_registers {
unsigned which_io; /* hi part of physical address */
diff --git a/include/asm-sparc64/poll.h b/include/asm-sparc64/poll.h
index ab6b0d1..ebeeb38 100644
--- a/include/asm-sparc64/poll.h
+++ b/include/asm-sparc64/poll.h
@@ -1,24 +1,12 @@
#ifndef __SPARC64_POLL_H
#define __SPARC64_POLL_H
-#define POLLIN 1
-#define POLLPRI 2
-#define POLLOUT 4
-#define POLLERR 8
-#define POLLHUP 16
-#define POLLNVAL 32
-#define POLLRDNORM 64
#define POLLWRNORM POLLOUT
-#define POLLRDBAND 128
#define POLLWRBAND 256
#define POLLMSG 512
#define POLLREMOVE 1024
#define POLLRDHUP 2048
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
#endif
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index fcd62759..53e96ed 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -329,8 +329,11 @@
#define __NR_getcpu 308
#define __NR_epoll_pwait 309
#define __NR_utimensat 310
+#define __NR_signalfd 311
+#define __NR_timerfd 312
+#define __NR_eventfd 313
-#define NR_SYSCALLS 311
+#define NR_SYSCALLS 314
#ifdef __KERNEL__
/* sysconf options, for SunOS compatibility */
diff --git a/include/asm-um/thread_info.h b/include/asm-um/thread_info.h
index 261e2f4..18a13ba 100644
--- a/include/asm-um/thread_info.h
+++ b/include/asm-um/thread_info.h
@@ -22,6 +22,7 @@
0-0xBFFFFFFF for user
0-0xFFFFFFFF for kernel */
struct restart_block restart_block;
+ struct thread_info *real_thread; /* Points to non-IRQ stack */
};
#define INIT_THREAD_INFO(tsk) \
@@ -35,6 +36,7 @@
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
+ .real_thread = NULL, \
}
#define init_thread_info (init_thread_union.thread_info)
diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h
index c10176c..803cad0 100644
--- a/include/asm-v850/poll.h
+++ b/include/asm-v850/poll.h
@@ -1,24 +1,9 @@
#ifndef __V850_POLL_H__
#define __V850_POLL_H__
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-#define POLLRDNORM 0x0040
#define POLLWRNORM POLLOUT
-#define POLLRDBAND 0x0080
#define POLLWRBAND 0x0100
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
#endif /* __V850_POLL_H__ */
diff --git a/include/asm-x86_64/alternative.h b/include/asm-x86_64/alternative.h
index a09fe85..a094276 100644
--- a/include/asm-x86_64/alternative.h
+++ b/include/asm-x86_64/alternative.h
@@ -103,6 +103,12 @@
".previous" : output : [feat] "i" (feature), ##input)
/*
+ * use this macro(s) if you need more than one output parameter
+ * in alternative_io
+ */
+#define ASM_OUTPUT2(a, b) a, b
+
+/*
* Alternative inline assembly for SMP.
*
* The LOCK_PREFIX macro defined here replaces the LOCK and
diff --git a/include/asm-x86_64/kdebug.h b/include/asm-x86_64/kdebug.h
index 74feae9..d7e2bcf 100644
--- a/include/asm-x86_64/kdebug.h
+++ b/include/asm-x86_64/kdebug.h
@@ -22,7 +22,6 @@
DIE_GPF,
DIE_CALL,
DIE_NMI_IPI,
- DIE_NMI_POST,
DIE_PAGE_FAULT,
};
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
index dee632f..e327c83 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86_64/page.h
@@ -80,6 +80,15 @@
#define __PHYSICAL_START CONFIG_PHYSICAL_START
#define __KERNEL_ALIGN 0x200000
+/*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+#endif
+
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
#define __PAGE_OFFSET _AC(0xffff810000000000, UL)
diff --git a/include/asm-x86_64/poll.h b/include/asm-x86_64/poll.h
index c0475a9..c98509d 100644
--- a/include/asm-x86_64/poll.h
+++ b/include/asm-x86_64/poll.h
@@ -1,27 +1 @@
-#ifndef __x86_64_POLL_H
-#define __x86_64_POLL_H
-
-/* These are specified by iBCS2 */
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-/* The rest seem to be more-or-less nonstandard. Check them! */
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
-#define POLLWRNORM 0x0100
-#define POLLWRBAND 0x0200
-#define POLLMSG 0x0400
-#define POLLREMOVE 0x1000
-#define POLLRDHUP 0x2000
-
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
-
-#endif
+#include <asm-generic/poll.h>
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index 5957039..ae1ed05 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -621,6 +621,15 @@
__SYSCALL(__NR_move_pages, sys_move_pages)
#define __NR_utimensat 280
__SYSCALL(__NR_utimensat, sys_utimensat)
+#define __IGNORE_getcpu /* implemented as a vsyscall */
+#define __NR_epoll_pwait 281
+__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
+#define __NR_signalfd 282
+__SYSCALL(__NR_signalfd, sys_signalfd)
+#define __NR_timerfd 282
+__SYSCALL(__NR_timerfd, sys_timerfd)
+#define __NR_eventfd 283
+__SYSCALL(__NR_eventfd, sys_eventfd)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
diff --git a/include/asm-xtensa/poll.h b/include/asm-xtensa/poll.h
index 6fd9477..9d2d599 100644
--- a/include/asm-xtensa/poll.h
+++ b/include/asm-xtensa/poll.h
@@ -11,28 +11,10 @@
#ifndef _XTENSA_POLL_H
#define _XTENSA_POLL_H
-
-#define POLLIN 0x0001
-#define POLLPRI 0x0002
-#define POLLOUT 0x0004
-
-#define POLLERR 0x0008
-#define POLLHUP 0x0010
-#define POLLNVAL 0x0020
-
-#define POLLRDNORM 0x0040
-#define POLLRDBAND 0x0080
#define POLLWRNORM POLLOUT
#define POLLWRBAND 0x0100
-
-#define POLLMSG 0x0400
#define POLLREMOVE 0x0800
-#define POLLRDHUP 0x2000
-struct pollfd {
- int fd;
- short events;
- short revents;
-};
+#include <asm-generic/poll.h>
#endif /* _XTENSA_POLL_H */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 94cc04a..bcd01f2 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -140,7 +140,6 @@
header-y += sockios.h
header-y += som.h
header-y += sound.h
-header-y += synclink.h
header-y += taskstats.h
header-y += telephony.h
header-y += termios.h
@@ -191,6 +190,7 @@
unifdef-y += errqueue.h
unifdef-y += ethtool.h
unifdef-y += eventpoll.h
+unifdef-y += signalfd.h
unifdef-y += ext2_fs.h
unifdef-y += ext3_fs.h
unifdef-y += fb.h
@@ -320,6 +320,7 @@
unifdef-y += soundcard.h
unifdef-y += stat.h
unifdef-y += stddef.h
+unifdef-y += synclink.h
unifdef-y += sysctl.h
unifdef-y += tcp.h
unifdef-y += time.h
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 8bcfaa4..fccd8b5 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -182,7 +182,8 @@
extern int ec_write(u8 addr, u8 val);
extern int ec_transaction(u8 command,
const u8 *wdata, unsigned wdata_len,
- u8 *rdata, unsigned rdata_len);
+ u8 *rdata, unsigned rdata_len,
+ int force_poll);
#endif /*CONFIG_ACPI_EC*/
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 43dc2eb..b903fc0 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -119,6 +119,12 @@
struct list_head ki_list; /* the aio core uses this
* for cancellation */
+
+ /*
+ * If the aio_resfd field of the userspace iocb is not zero,
+ * this is the underlying file* to deliver event to.
+ */
+ struct file *ki_eventfd;
};
#define is_sync_kiocb(iocb) ((iocb)->ki_key == KIOCB_SYNC_KEY)
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
index e3ca0a4..9e01729 100644
--- a/include/linux/aio_abi.h
+++ b/include/linux/aio_abi.h
@@ -45,6 +45,14 @@
IOCB_CMD_PWRITEV = 8,
};
+/*
+ * Valid flags for the "aio_flags" member of the "struct iocb".
+ *
+ * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb"
+ * is valid.
+ */
+#define IOCB_FLAG_RESFD (1 << 0)
+
/* read() from /dev/aio returns these structures. */
struct io_event {
__u64 data; /* the data field from the iocb */
@@ -84,7 +92,15 @@
/* extra parameters */
__u64 aio_reserved2; /* TODO: use this for a (struct sigevent *) */
- __u64 aio_reserved3;
+
+ /* flags for the "struct iocb" */
+ __u32 aio_flags;
+
+ /*
+ * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
+ * eventfd to signal AIO readiness to
+ */
+ __u32 aio_resfd;
}; /* 64 bytes */
#undef IFBIG
diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h
new file mode 100644
index 0000000..b2e1ba3
--- /dev/null
+++ b/include/linux/anon_inodes.h
@@ -0,0 +1,16 @@
+/*
+ * include/linux/anon_inodes.h
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_ANON_INODES_H
+#define _LINUX_ANON_INODES_H
+
+int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile,
+ const char *name, const struct file_operations *fops,
+ void *priv);
+
+#endif /* _LINUX_ANON_INODES_H */
+
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 773e30d..fccc6e5 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -91,6 +91,7 @@
#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */
#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */
#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */
+#define AUDIT_OBJ_PID 1318 /* ptrace target */
#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
@@ -111,6 +112,7 @@
#define AUDIT_FIRST_KERN_ANOM_MSG 1700
#define AUDIT_LAST_KERN_ANOM_MSG 1799
#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */
+#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */
#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */
@@ -148,6 +150,8 @@
#define AUDIT_CLASS_READ_32 5
#define AUDIT_CLASS_WRITE 6
#define AUDIT_CLASS_WRITE_32 7
+#define AUDIT_CLASS_SIGNAL 8
+#define AUDIT_CLASS_SIGNAL_32 9
/* This bitmask is used to validate user input. It represents all bits that
* are currently used in an audit field constant understood by the kernel.
@@ -337,6 +341,7 @@
#define AUDITSC_RESULT(x) ( ((long)(x))<0?AUDITSC_FAILURE:AUDITSC_SUCCESS )
extern int __init audit_register_class(int class, unsigned *list);
extern int audit_classify_syscall(int abi, unsigned syscall);
+extern int audit_classify_arch(int arch);
#ifdef CONFIG_AUDITSYSCALL
/* These are defined in auditsc.c */
/* Public API */
@@ -351,7 +356,8 @@
extern void __audit_inode(const char *name, const struct inode *inode);
extern void __audit_inode_child(const char *dname, const struct inode *inode,
const struct inode *parent);
-extern void __audit_inode_update(const struct inode *inode);
+extern void __audit_ptrace(struct task_struct *t);
+
static inline int audit_dummy_context(void)
{
void *p = current->audit_context;
@@ -372,9 +378,12 @@
if (unlikely(!audit_dummy_context()))
__audit_inode_child(dname, inode, parent);
}
-static inline void audit_inode_update(const struct inode *inode) {
+void audit_core_dumps(long signr);
+
+static inline void audit_ptrace(struct task_struct *t)
+{
if (unlikely(!audit_dummy_context()))
- __audit_inode_update(inode);
+ __audit_ptrace(t);
}
/* Private API (for audit.c only) */
@@ -447,6 +456,7 @@
return 0;
}
extern int audit_n_rules;
+extern int audit_signals;
#else
#define audit_alloc(t) ({ 0; })
#define audit_free(t) do { ; } while (0)
@@ -457,10 +467,9 @@
#define audit_putname(n) do { ; } while (0)
#define __audit_inode(n,i) do { ; } while (0)
#define __audit_inode_child(d,i,p) do { ; } while (0)
-#define __audit_inode_update(i) do { ; } while (0)
#define audit_inode(n,i) do { ; } while (0)
#define audit_inode_child(d,i,p) do { ; } while (0)
-#define audit_inode_update(i) do { ; } while (0)
+#define audit_core_dumps(i) do { ; } while (0)
#define auditsc_get_stamp(c,t,s) do { BUG(); } while (0)
#define audit_get_loginuid(c) ({ -1; })
#define audit_log_task_context(b) do { ; } while (0)
@@ -477,7 +486,9 @@
#define audit_mq_timedreceive(d,l,p,t) ({ 0; })
#define audit_mq_notify(d,n) ({ 0; })
#define audit_mq_getsetattr(d,s) ({ 0; })
+#define audit_ptrace(t) ((void)0)
#define audit_n_rules 0
+#define audit_signals 0
#endif
#ifdef CONFIG_AUDIT
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 70a157a..0e69d2c 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -225,6 +225,11 @@
return lhs->tv_nsec - rhs->tv_nsec;
}
+extern int get_compat_itimerspec(struct itimerspec *dst,
+ const struct compat_itimerspec __user *src);
+extern int put_compat_itimerspec(struct compat_itimerspec __user *dst,
+ const struct itimerspec *src);
+
asmlinkage long compat_sys_adjtimex(struct compat_timex __user *utp);
extern int compat_printk(const char *fmt, ...);
@@ -256,5 +261,11 @@
asmlinkage long compat_sys_utimensat(unsigned int dfd, char __user *filename,
struct compat_timespec __user *t, int flags);
+asmlinkage long compat_sys_signalfd(int ufd,
+ const compat_sigset_t __user *sigmask,
+ compat_size_t sigsetsize);
+asmlinkage long compat_sys_timerfd(int ufd, int clockid, int flags,
+ const struct compat_itimerspec __user *utmr);
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/crc-itu-t.h b/include/linux/crc-itu-t.h
new file mode 100644
index 0000000..84920f3
--- /dev/null
+++ b/include/linux/crc-itu-t.h
@@ -0,0 +1,28 @@
+/*
+ * crc-itu-t.h - CRC ITU-T V.41 routine
+ *
+ * Implements the standard CRC ITU-T V.41:
+ * Width 16
+ * Poly 0x0x1021 (x^16 + x^12 + x^15 + 1)
+ * Init 0
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#ifndef CRC_ITU_T_H
+#define CRC_ITU_T_H
+
+#include <linux/types.h>
+
+extern u16 const crc_itu_t_table[256];
+
+extern u16 crc_itu_t(u16 crc, const u8 *buffer, size_t len);
+
+static inline u16 crc_itu_t_byte(u16 crc, const u8 data)
+{
+ return (crc << 8) ^ crc_itu_t_table[((crc >> 8) ^ data) & 0xff];
+}
+
+#endif /* CRC_ITU_T_H */
+
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
new file mode 100644
index 0000000..0d6ecc6
--- /dev/null
+++ b/include/linux/eventfd.h
@@ -0,0 +1,29 @@
+/*
+ * include/linux/eventfd.h
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_EVENTFD_H
+#define _LINUX_EVENTFD_H
+
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_EVENTFD
+
+struct file *eventfd_fget(int fd);
+int eventfd_signal(struct file *file, int n);
+
+#else /* CONFIG_EVENTFD */
+
+#define eventfd_fget(fd) ERR_PTR(-ENOSYS)
+#define eventfd_signal(f, n) 0
+
+#endif /* CONFIG_EVENTFD */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_EVENTFD_H */
+
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
new file mode 100644
index 0000000..d4455eb
--- /dev/null
+++ b/include/linux/firewire-cdev.h
@@ -0,0 +1,229 @@
+/*
+ * Char device interface.
+ *
+ * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _LINUX_FIREWIRE_CDEV_H
+#define _LINUX_FIREWIRE_CDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/firewire-constants.h>
+
+#define FW_CDEV_EVENT_BUS_RESET 0x00
+#define FW_CDEV_EVENT_RESPONSE 0x01
+#define FW_CDEV_EVENT_REQUEST 0x02
+#define FW_CDEV_EVENT_ISO_INTERRUPT 0x03
+
+/* The 'closure' fields are for user space to use. Data passed in the
+ * 'closure' field for a request will be returned in the corresponding
+ * event. It's a 64-bit type so that it's a fixed size type big
+ * enough to hold a pointer on all platforms. */
+
+struct fw_cdev_event_common {
+ __u64 closure;
+ __u32 type;
+};
+
+struct fw_cdev_event_bus_reset {
+ __u64 closure;
+ __u32 type;
+ __u32 node_id;
+ __u32 local_node_id;
+ __u32 bm_node_id;
+ __u32 irm_node_id;
+ __u32 root_node_id;
+ __u32 generation;
+};
+
+struct fw_cdev_event_response {
+ __u64 closure;
+ __u32 type;
+ __u32 rcode;
+ __u32 length;
+ __u32 data[0];
+};
+
+struct fw_cdev_event_request {
+ __u64 closure;
+ __u32 type;
+ __u32 tcode;
+ __u64 offset;
+ __u32 handle;
+ __u32 length;
+ __u32 data[0];
+};
+
+struct fw_cdev_event_iso_interrupt {
+ __u64 closure;
+ __u32 type;
+ __u32 cycle;
+ __u32 header_length; /* Length in bytes of following headers. */
+ __u32 header[0];
+};
+
+union fw_cdev_event {
+ struct fw_cdev_event_common common;
+ struct fw_cdev_event_bus_reset bus_reset;
+ struct fw_cdev_event_response response;
+ struct fw_cdev_event_request request;
+ struct fw_cdev_event_iso_interrupt iso_interrupt;
+};
+
+#define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info)
+#define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request)
+#define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate)
+#define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate)
+#define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response)
+#define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
+#define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
+#define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
+
+#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
+#define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso)
+#define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso)
+#define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso)
+
+/* FW_CDEV_VERSION History
+ *
+ * 1 Feb 18, 2007: Initial version.
+ */
+#define FW_CDEV_VERSION 1
+
+struct fw_cdev_get_info {
+ /* The version field is just a running serial number. We
+ * never break backwards compatibility. Userspace passes in
+ * the version it expects and the kernel passes back the
+ * highest version it can provide. Even if the structs in
+ * this interface are extended in a later version, the kernel
+ * will not copy back more data than what was present in the
+ * interface version userspace expects. */
+ __u32 version;
+
+ /* If non-zero, at most rom_length bytes of config rom will be
+ * copied into that user space address. In either case,
+ * rom_length is updated with the actual length of the config
+ * rom. */
+ __u32 rom_length;
+ __u64 rom;
+
+ /* If non-zero, a fw_cdev_event_bus_reset struct will be
+ * copied here with the current state of the bus. This does
+ * not cause a bus reset to happen. The value of closure in
+ * this and sub-sequent bus reset events is set to
+ * bus_reset_closure. */
+ __u64 bus_reset;
+ __u64 bus_reset_closure;
+
+ /* The index of the card this devices belongs to. */
+ __u32 card;
+};
+
+struct fw_cdev_send_request {
+ __u32 tcode;
+ __u32 length;
+ __u64 offset;
+ __u64 closure;
+ __u64 data;
+ __u32 generation;
+};
+
+struct fw_cdev_send_response {
+ __u32 rcode;
+ __u32 length;
+ __u64 data;
+ __u32 handle;
+};
+
+struct fw_cdev_allocate {
+ __u64 offset;
+ __u64 closure;
+ __u32 length;
+ __u32 handle;
+};
+
+struct fw_cdev_deallocate {
+ __u32 handle;
+};
+
+#define FW_CDEV_LONG_RESET 0
+#define FW_CDEV_SHORT_RESET 1
+
+struct fw_cdev_initiate_bus_reset {
+ __u32 type;
+};
+
+struct fw_cdev_add_descriptor {
+ __u32 immediate;
+ __u32 key;
+ __u64 data;
+ __u32 length;
+ __u32 handle;
+};
+
+struct fw_cdev_remove_descriptor {
+ __u32 handle;
+};
+
+#define FW_CDEV_ISO_CONTEXT_TRANSMIT 0
+#define FW_CDEV_ISO_CONTEXT_RECEIVE 1
+
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8
+#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15
+
+struct fw_cdev_create_iso_context {
+ __u32 type;
+ __u32 header_size;
+ __u32 channel;
+ __u32 speed;
+ __u64 closure;
+ __u32 handle;
+};
+
+struct fw_cdev_iso_packet {
+ __u16 payload_length; /* Length of indirect payload. */
+ __u32 interrupt : 1; /* Generate interrupt on this packet */
+ __u32 skip : 1; /* Set to not send packet at all. */
+ __u32 tag : 2;
+ __u32 sy : 4;
+ __u32 header_length : 8; /* Length of immediate header. */
+ __u32 header[0];
+};
+
+struct fw_cdev_queue_iso {
+ __u64 packets;
+ __u64 data;
+ __u32 size;
+ __u32 handle;
+};
+
+struct fw_cdev_start_iso {
+ __s32 cycle;
+ __u32 sync;
+ __u32 tags;
+ __u32 handle;
+};
+
+struct fw_cdev_stop_iso {
+ __u32 handle;
+};
+
+#endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/include/linux/firewire-constants.h b/include/linux/firewire-constants.h
new file mode 100644
index 0000000..b316770
--- /dev/null
+++ b/include/linux/firewire-constants.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_FIREWIRE_CONSTANTS_H
+#define _LINUX_FIREWIRE_CONSTANTS_H
+
+#define TCODE_WRITE_QUADLET_REQUEST 0x0
+#define TCODE_WRITE_BLOCK_REQUEST 0x1
+#define TCODE_WRITE_RESPONSE 0x2
+#define TCODE_READ_QUADLET_REQUEST 0x4
+#define TCODE_READ_BLOCK_REQUEST 0x5
+#define TCODE_READ_QUADLET_RESPONSE 0x6
+#define TCODE_READ_BLOCK_RESPONSE 0x7
+#define TCODE_CYCLE_START 0x8
+#define TCODE_LOCK_REQUEST 0x9
+#define TCODE_STREAM_DATA 0xa
+#define TCODE_LOCK_RESPONSE 0xb
+
+#define EXTCODE_MASK_SWAP 0x1
+#define EXTCODE_COMPARE_SWAP 0x2
+#define EXTCODE_FETCH_ADD 0x3
+#define EXTCODE_LITTLE_ADD 0x4
+#define EXTCODE_BOUNDED_ADD 0x5
+#define EXTCODE_WRAP_ADD 0x6
+#define EXTCODE_VENDOR_DEPENDENT 0x7
+
+/* Juju specific tcodes */
+#define TCODE_LOCK_MASK_SWAP (0x10 | EXTCODE_MASK_SWAP)
+#define TCODE_LOCK_COMPARE_SWAP (0x10 | EXTCODE_COMPARE_SWAP)
+#define TCODE_LOCK_FETCH_ADD (0x10 | EXTCODE_FETCH_ADD)
+#define TCODE_LOCK_LITTLE_ADD (0x10 | EXTCODE_LITTLE_ADD)
+#define TCODE_LOCK_BOUNDED_ADD (0x10 | EXTCODE_BOUNDED_ADD)
+#define TCODE_LOCK_WRAP_ADD (0x10 | EXTCODE_WRAP_ADD)
+#define TCODE_LOCK_VENDOR_DEPENDENT (0x10 | EXTCODE_VENDOR_DEPENDENT)
+
+#define RCODE_COMPLETE 0x0
+#define RCODE_CONFLICT_ERROR 0x4
+#define RCODE_DATA_ERROR 0x5
+#define RCODE_TYPE_ERROR 0x6
+#define RCODE_ADDRESS_ERROR 0x7
+
+/* Juju specific rcodes */
+#define RCODE_SEND_ERROR 0x10
+#define RCODE_CANCELLED 0x11
+#define RCODE_BUSY 0x12
+#define RCODE_GENERATION 0x13
+#define RCODE_NO_ACK 0x14
+
+#define SCODE_100 0x0
+#define SCODE_200 0x1
+#define SCODE_400 0x2
+#define SCODE_800 0x3
+#define SCODE_1600 0x4
+#define SCODE_3200 0x5
+#define SCODE_BETA 0x3
+
+#define ACK_COMPLETE 0x1
+#define ACK_PENDING 0x2
+#define ACK_BUSY_X 0x4
+#define ACK_BUSY_A 0x5
+#define ACK_BUSY_B 0x6
+#define ACK_DATA_ERROR 0xd
+#define ACK_TYPE_ERROR 0xe
+
+#define RETRY_1 0x00
+#define RETRY_X 0x01
+#define RETRY_A 0x02
+#define RETRY_B 0x03
+
+#endif /* _LINUX_FIREWIRE_CONSTANTS_H */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index f589559..4c03ee3 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -434,6 +434,10 @@
#endif
-#endif
+#else /* CONFIG_BLOCK */
+
+static inline void printk_all_partitions(void) { }
+
+#endif /* CONFIG_BLOCK */
#endif
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 37076b1..827ee74 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -275,6 +275,7 @@
#define HID_QUIRK_LOGITECH_DESCRIPTOR 0x00100000
#define HID_QUIRK_DUPLICATE_USAGES 0x00200000
#define HID_QUIRK_RESET_LEDS 0x00400000
+#define HID_QUIRK_SWAPPED_MIN_MAX 0x00800000
/*
* This is the global environment of the parser. This information is
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 0e8da68..aa83d41 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -117,6 +117,7 @@
#define I2C_DRIVERID_ISL1208 88 /* Intersil ISL1208 RTC */
#define I2C_DRIVERID_WM8731 89 /* Wolfson WM8731 audio codec */
#define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */
+#define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
diff --git a/include/linux/init.h b/include/linux/init.h
index 8bc32bb..e007ae4 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -52,14 +52,9 @@
#endif
/* For assembly routines */
-#ifdef CONFIG_HOTPLUG_CPU
-#define __INIT .section ".text","ax"
-#define __INITDATA .section ".data","aw"
-#else
#define __INIT .section ".init.text","ax"
-#define __INITDATA .section ".init.data","aw"
-#endif
#define __FINIT .previous
+#define __INITDATA .section ".init.data","aw"
#ifndef __ASSEMBLY__
/*
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 45170b2..276ccaa 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -65,9 +65,9 @@
.posix_timers = LIST_HEAD_INIT(sig.posix_timers), \
.cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \
.rlim = INIT_RLIMITS, \
- .pgrp = 1, \
+ .pgrp = 0, \
.tty_old_pgrp = NULL, \
- { .__session = 1}, \
+ { .__session = 0}, \
}
extern struct nsproxy init_nsproxy;
@@ -84,10 +84,33 @@
.count = ATOMIC_INIT(1), \
.action = { { { .sa_handler = NULL, } }, }, \
.siglock = __SPIN_LOCK_UNLOCKED(sighand.siglock), \
+ .signalfd_list = LIST_HEAD_INIT(sighand.signalfd_list), \
}
extern struct group_info init_groups;
+#define INIT_STRUCT_PID { \
+ .count = ATOMIC_INIT(1), \
+ .nr = 0, \
+ /* Don't put this struct pid in pid_hash */ \
+ .pid_chain = { .next = NULL, .pprev = NULL }, \
+ .tasks = { \
+ { .first = &init_task.pids[PIDTYPE_PID].node }, \
+ { .first = &init_task.pids[PIDTYPE_PGID].node }, \
+ { .first = &init_task.pids[PIDTYPE_SID].node }, \
+ }, \
+ .rcu = RCU_HEAD_INIT, \
+}
+
+#define INIT_PID_LINK(type) \
+{ \
+ .node = { \
+ .next = NULL, \
+ .pprev = &init_struct_pid.tasks[type].first, \
+ }, \
+ .pid = &init_struct_pid, \
+}
+
/*
* INIT_TASK is used to set up the first task table, touch at
* your own risk!. Base=0, limit=0x1fffff (=2MB)
@@ -139,6 +162,11 @@
.cpu_timers = INIT_CPU_TIMERS(tsk.cpu_timers), \
.fs_excl = ATOMIC_INIT(0), \
.pi_lock = __SPIN_LOCK_UNLOCKED(tsk.pi_lock), \
+ .pids = { \
+ [PIDTYPE_PID] = INIT_PID_LINK(PIDTYPE_PID), \
+ [PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID), \
+ [PIDTYPE_SID] = INIT_PID_LINK(PIDTYPE_SID), \
+ }, \
INIT_TRACE_IRQFLAGS \
INIT_LOCKDEP \
}
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index f7b01b9..5323f62 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -241,6 +241,16 @@
#define save_and_cli(x) save_and_cli(&x)
#endif /* CONFIG_SMP */
+/* Some architectures might implement lazy enabling/disabling of
+ * interrupts. In some cases, such as stop_machine, we might want
+ * to ensure that after a local_irq_disable(), interrupts have
+ * really been disabled in hardware. Such architectures need to
+ * implement the following hook.
+ */
+#ifndef hard_irq_disable
+#define hard_irq_disable() do { } while(0)
+#endif
+
/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
frequency threaded job scheduling. For almost all the purposes
tasklets are more than enough. F.e. all serial device BHs et
diff --git a/include/linux/io.h b/include/linux/io.h
index 09d3512..8423dd3 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -27,8 +27,16 @@
void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
void __iowrite64_copy(void __iomem *to, const void *from, size_t count);
+#ifdef CONFIG_MMU
int ioremap_page_range(unsigned long addr, unsigned long end,
unsigned long phys_addr, pgprot_t prot);
+#else
+static inline int ioremap_page_range(unsigned long addr, unsigned long end,
+ unsigned long phys_addr, pgprot_t prot)
+{
+ return 0;
+}
+#endif
/*
* Managed iomap interface
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 144b615..45353d7 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -41,6 +41,16 @@
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+/**
+ * upper_32_bits - return bits 32-63 of a number
+ * @n: the number we're accessing
+ *
+ * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
+ * the "right shift count >= width of type" warning when that quantity is
+ * 32-bits.
+ */
+#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
+
#define KERN_EMERG "<0>" /* system is unusable */
#define KERN_ALERT "<1>" /* action must be taken immediately */
#define KERN_CRIT "<2>" /* critical conditions */
@@ -203,6 +213,17 @@
extern void dump_stack(void);
+enum {
+ DUMP_PREFIX_NONE,
+ DUMP_PREFIX_ADDRESS,
+ DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len, char *linebuf,
+ size_t linebuflen);
+extern void print_hex_dump(const char *level, int prefix_type,
+ void *buf, size_t len);
+#define hex_asc(x) "0123456789abcdef"[x]
+
#ifdef DEBUG
/* If you are writing a driver, please use dev_dbg instead */
#define pr_debug(fmt,arg...) \
@@ -289,8 +310,8 @@
*
*/
#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
/*
* Check at compile time that something is of a particular type.
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7906d75..27d9362 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -140,7 +140,6 @@
ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */
- ATA_DFLAG_SUSPENDED = (1 << 10), /* device suspended */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
@@ -191,6 +190,7 @@
ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */
ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */
ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
+ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */
ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
@@ -254,10 +254,6 @@
ATA_DMA_PAD_SZ = 4,
ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE,
- /* masks for port functions */
- ATA_PORT_PRIMARY = (1 << 0),
- ATA_PORT_SECONDARY = (1 << 1),
-
/* ering size */
ATA_ERING_SIZE = 32,
@@ -268,13 +264,9 @@
ATA_EH_REVALIDATE = (1 << 0),
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
- ATA_EH_SUSPEND = (1 << 3),
- ATA_EH_RESUME = (1 << 4),
- ATA_EH_PM_FREEZE = (1 << 5),
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
- ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND |
- ATA_EH_RESUME | ATA_EH_PM_FREEZE,
+ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
@@ -466,7 +458,7 @@
struct ata_ering ering;
int spdn_cnt;
unsigned int horkage; /* List of broken features */
-#ifdef CONFIG_SATA_ACPI
+#ifdef CONFIG_ATA_ACPI
/* ACPI objects info */
acpi_handle obj_handle;
#endif
@@ -693,8 +685,8 @@
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
-extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
- unsigned int n_ports);
+extern int ata_pci_init_one (struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi);
extern void ata_pci_remove_one (struct pci_dev *pdev);
#ifdef CONFIG_PM
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
@@ -736,8 +728,6 @@
extern int ata_port_online(struct ata_port *ap);
extern int ata_port_offline(struct ata_port *ap);
#ifdef CONFIG_PM
-extern int ata_scsi_device_resume(struct scsi_device *);
-extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
#endif
@@ -861,11 +851,11 @@
unsigned long val;
};
-extern int ata_pci_init_native_host(struct ata_host *host,
- unsigned int port_mask);
+extern int ata_pci_init_native_host(struct ata_host *host);
+extern int ata_pci_init_bmdma(struct ata_host *host);
extern int ata_pci_prepare_native_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
- int n_ports, struct ata_host **r_host);
+ struct ata_host **r_host);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
#endif /* CONFIG_PCI */
@@ -1008,11 +998,6 @@
return ata_class_absent(dev->class);
}
-static inline unsigned int ata_dev_ready(const struct ata_device *dev)
-{
- return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED);
-}
-
/*
* port helpers
*/
diff --git a/include/linux/list.h b/include/linux/list.h
index 9202703..f29fc9c 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -264,8 +264,8 @@
*/
static inline void list_move(struct list_head *list, struct list_head *head)
{
- __list_del(list->prev, list->next);
- list_add(list, head);
+ __list_del(list->prev, list->next);
+ list_add(list, head);
}
/**
@@ -276,8 +276,8 @@
static inline void list_move_tail(struct list_head *list,
struct list_head *head)
{
- __list_del(list->prev, list->next);
- list_add_tail(list, head);
+ __list_del(list->prev, list->next);
+ list_add_tail(list, head);
}
/**
diff --git a/include/linux/magic.h b/include/linux/magic.h
index a9c6567..9d713c0 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -14,6 +14,7 @@
#define ISOFS_SUPER_MAGIC 0x9660
#define JFFS2_SUPER_MAGIC 0x72b6
#define KVMFS_SUPER_MAGIC 0x19700426
+#define ANON_INODE_FS_MAGIC 0x09041934
#define MINIX_SUPER_MAGIC 0x137F /* original minix fs */
#define MINIX_SUPER_MAGIC2 0x138F /* minix fs, 30 char names */
diff --git a/include/linux/major.h b/include/linux/major.h
index 0a74c52..7e7c909 100644
--- a/include/linux/major.h
+++ b/include/linux/major.h
@@ -152,6 +152,8 @@
#define USB_ACM_AUX_MAJOR 167
#define USB_CHAR_MAJOR 180
+#define MMC_BLOCK_MAJOR 179
+
#define VXVM_MAJOR 199 /* VERITAS volume i/o driver */
#define VXSPEC_MAJOR 200 /* VERITAS volume config driver */
#define VXDMP_MAJOR 201 /* VERITAS volume multipath driver */
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index e30687b..d5bb179 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -50,13 +50,16 @@
spinlock_t ptl;
#endif
struct { /* SLUB uses */
- struct page *first_page; /* Compound pages */
+ void **lockless_freelist;
struct kmem_cache *slab; /* Pointer to slab */
};
+ struct {
+ struct page *first_page; /* Compound pages */
+ };
};
union {
pgoff_t index; /* Our offset within mapping. */
- void *freelist; /* SLUB: pointer to free object */
+ void *freelist; /* SLUB: freelist req. slab lock */
};
struct list_head lru; /* Pageout list, eg. active_list
* protected by zone->lru_lock !
diff --git a/include/linux/module.h b/include/linux/module.h
index 792d483..e6e0f86 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -124,7 +124,7 @@
*/
#define MODULE_LICENSE(_license) MODULE_INFO(license, _license)
-/* Author, ideally of form NAME <EMAIL>[, NAME <EMAIL>]*[ and NAME <EMAIL>] */
+/* Author, ideally of form NAME[, NAME]*[ and NAME] */
#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
/* What your module does. */
diff --git a/include/linux/mpage.h b/include/linux/mpage.h
index cc5fb75..068a0c9 100644
--- a/include/linux/mpage.h
+++ b/include/linux/mpage.h
@@ -12,7 +12,6 @@
#ifdef CONFIG_BLOCK
struct writeback_control;
-typedef int (writepage_t)(struct page *page, struct writeback_control *wbc);
int mpage_readpages(struct address_space *mapping, struct list_head *pages,
unsigned nr_pages, get_block_t get_block);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 3044622..f671cd2 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -467,6 +467,8 @@
/* device index hash chain */
struct hlist_node index_hlist;
+ struct net_device *link_watch_next;
+
/* register/unregister state machine */
enum { NETREG_UNINITIALIZED=0,
NETREG_REGISTERED, /* completed register_netdevice */
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 022edfa..7e733a6 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -54,6 +54,14 @@
unsigned char data[0];
};
+#define XT_TARGET_INIT(__name, __size) \
+{ \
+ .target.u.user = { \
+ .target_size = XT_ALIGN(__size), \
+ .name = __name, \
+ }, \
+}
+
struct xt_standard_target
{
struct xt_entry_target target;
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index 24c8786..584cd1b 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -238,6 +238,47 @@
*/
#ifdef __KERNEL__
+/* Standard entry. */
+struct arpt_standard
+{
+ struct arpt_entry entry;
+ struct arpt_standard_target target;
+};
+
+struct arpt_error_target
+{
+ struct arpt_entry_target target;
+ char errorname[ARPT_FUNCTION_MAXNAMELEN];
+};
+
+struct arpt_error
+{
+ struct arpt_entry entry;
+ struct arpt_error_target target;
+};
+
+#define ARPT_ENTRY_INIT(__size) \
+{ \
+ .target_offset = sizeof(struct arpt_entry), \
+ .next_offset = (__size), \
+}
+
+#define ARPT_STANDARD_INIT(__verdict) \
+{ \
+ .entry = ARPT_ENTRY_INIT(sizeof(struct arpt_standard)), \
+ .target = XT_TARGET_INIT(ARPT_STANDARD_TARGET, \
+ sizeof(struct arpt_standard_target)), \
+ .target.verdict = -(__verdict) - 1, \
+}
+
+#define ARPT_ERROR_INIT \
+{ \
+ .entry = ARPT_ENTRY_INIT(sizeof(struct arpt_error)), \
+ .target = XT_TARGET_INIT(ARPT_ERROR_TARGET, \
+ sizeof(struct arpt_error_target)), \
+ .target.errorname = "ERROR", \
+}
+
#define arpt_register_target(tgt) \
({ (tgt)->family = NF_ARP; \
xt_register_target(tgt); })
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index 9527296..2f46dd7 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -295,6 +295,28 @@
struct ipt_error_target target;
};
+#define IPT_ENTRY_INIT(__size) \
+{ \
+ .target_offset = sizeof(struct ipt_entry), \
+ .next_offset = (__size), \
+}
+
+#define IPT_STANDARD_INIT(__verdict) \
+{ \
+ .entry = IPT_ENTRY_INIT(sizeof(struct ipt_standard)), \
+ .target = XT_TARGET_INIT(IPT_STANDARD_TARGET, \
+ sizeof(struct xt_standard_target)), \
+ .target.verdict = -(__verdict) - 1, \
+}
+
+#define IPT_ERROR_INIT \
+{ \
+ .entry = IPT_ENTRY_INIT(sizeof(struct ipt_error)), \
+ .target = XT_TARGET_INIT(IPT_ERROR_TARGET, \
+ sizeof(struct ipt_error_target)), \
+ .target.errorname = "ERROR", \
+}
+
extern unsigned int ipt_do_table(struct sk_buff **pskb,
unsigned int hook,
const struct net_device *in,
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index 61aa104..4686f83 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -123,6 +123,28 @@
struct ip6t_error_target target;
};
+#define IP6T_ENTRY_INIT(__size) \
+{ \
+ .target_offset = sizeof(struct ip6t_entry), \
+ .next_offset = (__size), \
+}
+
+#define IP6T_STANDARD_INIT(__verdict) \
+{ \
+ .entry = IP6T_ENTRY_INIT(sizeof(struct ip6t_standard)), \
+ .target = XT_TARGET_INIT(IP6T_STANDARD_TARGET, \
+ sizeof(struct ip6t_standard_target)), \
+ .target.verdict = -(__verdict) - 1, \
+}
+
+#define IP6T_ERROR_INIT \
+{ \
+ .entry = IP6T_ENTRY_INIT(sizeof(struct ip6t_error)), \
+ .target = XT_TARGET_INIT(IP6T_ERROR_TARGET, \
+ sizeof(struct ip6t_error_target)), \
+ .target.errorname = "ERROR", \
+}
+
/*
* New IP firewall options for [gs]etsockopt at the RAW IP level.
* Unlike BSD Linux inherits IP options so you don't have to use
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ae849f0..ccd85e4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -370,6 +370,7 @@
#define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380
#define PCI_DEVICE_ID_ATI_IXP600_SMBUS 0x4385
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
+#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 2ac27f9..1e0e4e3 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -51,6 +51,8 @@
struct rcu_head rcu;
};
+extern struct pid init_struct_pid;
+
struct pid_link
{
struct hlist_node node;
@@ -76,8 +78,7 @@
* write-held.
*/
extern int FASTCALL(attach_pid(struct task_struct *task,
- enum pid_type type, int nr));
-
+ enum pid_type type, struct pid *pid));
extern void FASTCALL(detach_pid(struct task_struct *task, enum pid_type));
extern void FASTCALL(transfer_pid(struct task_struct *old,
struct task_struct *new, enum pid_type));
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 37ca573..5ad913f 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -226,7 +226,7 @@
extern void pmu_backlight_init(void);
/* some code needs to know if the PMU was suspended for hibernation */
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
extern int pmu_sys_suspended;
#else
/* if power management is not configured it can't be suspended */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 17b72d8..a81897e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -88,6 +88,7 @@
struct exec_domain;
struct futex_pi_state;
+struct bio;
/*
* List of flags we want to share for kernel threads,
@@ -391,6 +392,7 @@
atomic_t count;
struct k_sigaction action[_NSIG];
spinlock_t siglock;
+ struct list_head signalfd_list;
};
struct pacct_struct {
@@ -469,6 +471,7 @@
cputime_t utime, stime, cutime, cstime;
unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
+ unsigned long inblock, oublock, cinblock, coublock;
/*
* Cumulative ns of scheduled CPU time for dead threads in the
@@ -1014,6 +1017,9 @@
/* journalling filesystem info */
void *journal_info;
+/* stacked block device info */
+ struct bio *bio_list, **bio_tail;
+
/* VM state */
struct reclaim_state *reclaim_state;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index aa2653a..a3ac4c8 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -139,6 +139,10 @@
/* Blackfin bf5xx */
#define PORT_BFIN 75
+/* Micrel KS8695 */
+#define PORT_KS8695 76
+
+
#ifdef __KERNEL__
#include <linux/compiler.h>
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 3fa0fab..9a5eac5 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -233,6 +233,7 @@
return sig <= _NSIG ? 1 : 0;
}
+extern int next_signal(struct sigpending *pending, sigset_t *mask);
extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
extern long do_sigpending(void __user *, unsigned long);
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
new file mode 100644
index 0000000..5104294
--- /dev/null
+++ b/include/linux/signalfd.h
@@ -0,0 +1,97 @@
+/*
+ * include/linux/signalfd.h
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_SIGNALFD_H
+#define _LINUX_SIGNALFD_H
+
+
+struct signalfd_siginfo {
+ __u32 signo;
+ __s32 err;
+ __s32 code;
+ __u32 pid;
+ __u32 uid;
+ __s32 fd;
+ __u32 tid;
+ __u32 band;
+ __u32 overrun;
+ __u32 trapno;
+ __s32 status;
+ __s32 svint;
+ __u64 svptr;
+ __u64 utime;
+ __u64 stime;
+ __u64 addr;
+
+ /*
+ * Pad strcture to 128 bytes. Remember to update the
+ * pad size when you add new memebers. We use a fixed
+ * size structure to avoid compatibility problems with
+ * future versions, and we leave extra space for additional
+ * members. We use fixed size members because this strcture
+ * comes out of a read(2) and we really don't want to have
+ * a compat on read(2).
+ */
+ __u8 __pad[48];
+};
+
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SIGNALFD
+
+/*
+ * Deliver the signal to listening signalfd. This must be called
+ * with the sighand lock held. Same are the following that end up
+ * calling signalfd_deliver().
+ */
+void signalfd_deliver(struct task_struct *tsk, int sig);
+
+/*
+ * No need to fall inside signalfd_deliver() if no signal listeners
+ * are available.
+ */
+static inline void signalfd_notify(struct task_struct *tsk, int sig)
+{
+ if (unlikely(!list_empty(&tsk->sighand->signalfd_list)))
+ signalfd_deliver(tsk, sig);
+}
+
+/*
+ * The signal -1 is used to notify the signalfd that the sighand
+ * is on its way to be detached.
+ */
+static inline void signalfd_detach_locked(struct task_struct *tsk)
+{
+ if (unlikely(!list_empty(&tsk->sighand->signalfd_list)))
+ signalfd_deliver(tsk, -1);
+}
+
+static inline void signalfd_detach(struct task_struct *tsk)
+{
+ struct sighand_struct *sighand = tsk->sighand;
+
+ if (unlikely(!list_empty(&sighand->signalfd_list))) {
+ spin_lock_irq(&sighand->siglock);
+ signalfd_deliver(tsk, -1);
+ spin_unlock_irq(&sighand->siglock);
+ }
+}
+
+#else /* CONFIG_SIGNALFD */
+
+#define signalfd_deliver(t, s) do { } while (0)
+#define signalfd_notify(t, s) do { } while (0)
+#define signalfd_detach_locked(t) do { } while (0)
+#define signalfd_detach(t) do { } while (0)
+
+#endif /* CONFIG_SIGNALFD */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SIGNALFD_H */
+
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index ea27065..fd6627e 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -60,7 +60,8 @@
#define KMALLOC_SHIFT_LOW 3
#ifdef CONFIG_LARGE_ALLOCS
-#define KMALLOC_SHIFT_HIGH 25
+#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) =< 25 ? \
+ (MAX_ORDER + PAGE_SHIFT - 1) : 25)
#else
#if !defined(CONFIG_MMU) || NR_CPUS > 512 || MAX_NUMNODES > 256
#define KMALLOC_SHIFT_HIGH 20
@@ -87,6 +88,9 @@
*/
WARN_ON_ONCE(size == 0);
+ if (size >= (1 << KMALLOC_SHIFT_HIGH))
+ return -1;
+
if (size > 64 && size <= 96)
return 1;
if (size > 128 && size <= 192)
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index c8b0426..5562fbf 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -291,4 +291,28 @@
#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
+#ifdef __KERNEL__
+/* provide 32 bit ioctl compatibility on 64 bit systems */
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+struct MGSL_PARAMS32 {
+ compat_ulong_t mode;
+ unsigned char loopback;
+ unsigned short flags;
+ unsigned char encoding;
+ compat_ulong_t clock_speed;
+ unsigned char addr_filter;
+ unsigned short crc_type;
+ unsigned char preamble_length;
+ unsigned char preamble;
+ compat_ulong_t data_rate;
+ unsigned char data_bits;
+ unsigned char stop_bits;
+ unsigned char parity;
+};
+#define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
+#define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
+#endif
+#endif
+
#endif /* _SYNCLINK_H_ */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 3139f44..b02070e 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -604,6 +604,10 @@
asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
size_t len);
asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache);
+asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask);
+asmlinkage long sys_timerfd(int ufd, int clockid, int flags,
+ const struct itimerspec __user *utmr);
+asmlinkage long sys_eventfd(unsigned int count);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h
index df2a319..1218733 100644
--- a/include/linux/task_io_accounting_ops.h
+++ b/include/linux/task_io_accounting_ops.h
@@ -10,11 +10,29 @@
current->ioac.read_bytes += bytes;
}
+/*
+ * We approximate number of blocks, because we account bytes only.
+ * A 'block' is 512 bytes
+ */
+static inline unsigned long task_io_get_inblock(const struct task_struct *p)
+{
+ return p->ioac.read_bytes >> 9;
+}
+
static inline void task_io_account_write(size_t bytes)
{
current->ioac.write_bytes += bytes;
}
+/*
+ * We approximate number of blocks, because we account bytes only.
+ * A 'block' is 512 bytes
+ */
+static inline unsigned long task_io_get_oublock(const struct task_struct *p)
+{
+ return p->ioac.write_bytes >> 9;
+}
+
static inline void task_io_account_cancelled_write(size_t bytes)
{
current->ioac.cancelled_write_bytes += bytes;
@@ -31,10 +49,20 @@
{
}
+static inline unsigned long task_io_get_inblock(const struct task_struct *p)
+{
+ return 0;
+}
+
static inline void task_io_account_write(size_t bytes)
{
}
+static inline unsigned long task_io_get_oublock(const struct task_struct *p)
+{
+ return 0;
+}
+
static inline void task_io_account_cancelled_write(size_t bytes)
{
}
diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h
new file mode 100644
index 0000000..cf2b10d
--- /dev/null
+++ b/include/linux/timerfd.h
@@ -0,0 +1,17 @@
+/*
+ * include/linux/timerfd.h
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_TIMERFD_H
+#define _LINUX_TIMERFD_H
+
+
+#define TFD_TIMER_ABSTIME (1 << 0)
+
+
+
+#endif /* _LINUX_TIMERFD_H */
+
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 659487e..85c95cd 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -52,6 +52,11 @@
* This routine allows the tty driver to implement
* device-specific ioctl's. If the ioctl number passed in cmd
* is not recognized by the driver, it should return ENOIOCTLCMD.
+ *
+ * long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
+ * unsigned int cmd, unsigned long arg);
+ *
+ * implement ioctl processing for 32 bit process on 64 bit system
*
* void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
*
@@ -132,6 +137,8 @@
int (*chars_in_buffer)(struct tty_struct *tty);
int (*ioctl)(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
+ long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg);
void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
void (*throttle)(struct tty_struct * tty);
void (*unthrottle)(struct tty_struct * tty);
@@ -193,6 +200,8 @@
int (*chars_in_buffer)(struct tty_struct *tty);
int (*ioctl)(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
+ long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg);
void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
void (*throttle)(struct tty_struct * tty);
void (*unthrottle)(struct tty_struct * tty);
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index d75932e..6226504 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -59,6 +59,11 @@
* low-level driver can "grab" an ioctl request before the line
* discpline has a chance to see it.
*
+ * long (*compat_ioctl)(struct tty_struct * tty, struct file * file,
+ * unsigned int cmd, unsigned long arg);
+ *
+ * Process ioctl calls from 32-bit process on 64-bit system
+ *
* void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
*
* This function notifies the line discpline that a change has
@@ -118,6 +123,8 @@
const unsigned char * buf, size_t nr);
int (*ioctl)(struct tty_struct * tty, struct file * file,
unsigned int cmd, unsigned long arg);
+ long (*compat_ioctl)(struct tty_struct * tty, struct file * file,
+ unsigned int cmd, unsigned long arg);
void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
unsigned int (*poll)(struct tty_struct *, struct file *,
struct poll_table_struct *);
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index daa6c12..050915b 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -111,9 +111,15 @@
balance_dirty_pages_ratelimited_nr(mapping, 1);
}
+typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
+ void *data);
+
int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0);
-extern int generic_writepages(struct address_space *mapping,
- struct writeback_control *wbc);
+int generic_writepages(struct address_space *mapping,
+ struct writeback_control *wbc);
+int write_cache_pages(struct address_space *mapping,
+ struct writeback_control *wbc, writepage_t writepage,
+ void *data);
int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
int sync_page_range(struct inode *inode, struct address_space *mapping,
loff_t pos, loff_t count);
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 796bcf1..d3f4f5a 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -58,6 +58,7 @@
unsigned long offset;
/* used for custom pagetables (used for example by budget dvb cards) */
struct scatterlist *slist;
+ int nents;
};
struct saa7146_pci_extension_data {
@@ -157,6 +158,7 @@
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
char *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, char *mem, struct saa7146_pgtable *pt);
void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
index 50e33b0..cce20ed 100644
--- a/include/media/saa7146_vv.h
+++ b/include/media/saa7146_vv.h
@@ -216,6 +216,8 @@
extern struct saa7146_use_ops saa7146_video_uops;
int saa7146_start_preview(struct saa7146_fh *fh);
int saa7146_stop_preview(struct saa7146_fh *fh);
+int saa7146_video_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg);
/* from saa7146_vbi.c */
extern struct saa7146_use_ops saa7146_vbi_uops;
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 1c6b8bd..4732432 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -183,13 +183,6 @@
extern void nf_conntrack_flush(void);
-extern struct nf_conntrack_helper *
-nf_ct_helper_find_get( const struct nf_conntrack_tuple *tuple);
-extern void nf_ct_helper_put(struct nf_conntrack_helper *helper);
-
-extern struct nf_conntrack_helper *
-__nf_conntrack_helper_find_byname(const char *name);
-
extern int nf_ct_invert_tuplepr(struct nf_conntrack_tuple *inverse,
const struct nf_conntrack_tuple *orig);
diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h
index f32f714..96a58d8 100644
--- a/include/net/netfilter/nf_conntrack_l3proto.h
+++ b/include/net/netfilter/nf_conntrack_l3proto.h
@@ -56,9 +56,6 @@
*/
int (*new)(struct nf_conn *conntrack, const struct sk_buff *skb);
- /* Called when a conntrack entry is destroyed */
- void (*destroy)(struct nf_conn *conntrack);
-
/*
* Called before tracking.
* *dataoff: offset of protocol header (TCP, UDP,...) in *pskb
diff --git a/include/net/netfilter/nf_nat_rule.h b/include/net/netfilter/nf_nat_rule.h
index e765654..f974318 100644
--- a/include/net/netfilter/nf_nat_rule.h
+++ b/include/net/netfilter/nf_nat_rule.h
@@ -10,16 +10,11 @@
unsigned int hooknum,
const struct net_device *in,
const struct net_device *out,
- struct nf_conn *ct,
- struct nf_nat_info *info);
+ struct nf_conn *ct);
extern unsigned int
-alloc_null_binding(struct nf_conn *ct,
- struct nf_nat_info *info,
- unsigned int hooknum);
+alloc_null_binding(struct nf_conn *ct, unsigned int hooknum);
extern unsigned int
-alloc_null_binding_confirmed(struct nf_conn *ct,
- struct nf_nat_info *info,
- unsigned int hooknum);
+alloc_null_binding_confirmed(struct nf_conn *ct, unsigned int hooknum);
#endif /* _NF_NAT_RULE_H */
diff --git a/include/net/udp.h b/include/net/udp.h
index 98755eb..496f89d 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -119,9 +119,16 @@
}
+struct udp_get_port_ops {
+ int (*saddr_cmp)(const struct sock *sk1, const struct sock *sk2);
+ int (*saddr_any)(const struct sock *sk);
+ unsigned int (*hash_port_and_rcv_saddr)(__u16 port,
+ const struct sock *sk);
+};
+
/* net/ipv4/udp.c */
extern int udp_get_port(struct sock *sk, unsigned short snum,
- int (*saddr_cmp)(const struct sock *, const struct sock *));
+ const struct udp_get_port_ops *ops);
extern void udp_err(struct sk_buff *, u32);
extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
diff --git a/include/net/udplite.h b/include/net/udplite.h
index 635b0ea..50b4b42 100644
--- a/include/net/udplite.h
+++ b/include/net/udplite.h
@@ -120,5 +120,5 @@
extern void udplite4_register(void);
extern int udplite_get_port(struct sock *sk, unsigned short snum,
- int (*scmp)(const struct sock *, const struct sock *));
+ const struct udp_get_port_ops *ops);
#endif /* _UDPLITE_H */
diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h
index c149d3b..d647dae 100644
--- a/include/sound/ak4114.h
+++ b/include/sound/ak4114.h
@@ -73,7 +73,7 @@
/* AK4114_REQ_FORMAT bits */
#define AK4114_MONO (1<<7) /* Double Sampling Frequency Mode: 0 = stereo, 1 = mono */
-#define AK4114_DIF2 (1<<5) /* Audio Data Control */
+#define AK4114_DIF2 (1<<6) /* Audio Data Control */
#define AK4114_DIF1 (1<<5) /* Audio Data Control */
#define AK4114_DIF0 (1<<4) /* Audio Data Control */
#define AK4114_DIF_16R (0) /* STDO: 16-bit, right justified */
@@ -158,7 +158,7 @@
#define AK4114_CHECK_NO_STAT (1<<0) /* no statistics */
#define AK4114_CHECK_NO_RATE (1<<1) /* no rate check */
-#define AK4114_CONTROLS 14
+#define AK4114_CONTROLS 15
typedef void (ak4114_write_t)(void *private_data, unsigned char addr, unsigned char data);
typedef unsigned char (ak4114_read_t)(void *private_data, unsigned char addr);
diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h
index 8c88267..d5c1396 100644
--- a/include/sound/mpu401.h
+++ b/include/sound/mpu401.h
@@ -50,6 +50,7 @@
#define MPU401_INFO_INTEGRATED (1 << 2) /* integrated h/w port */
#define MPU401_INFO_MMIO (1 << 3) /* MMIO access */
#define MPU401_INFO_TX_IRQ (1 << 4) /* independent TX irq */
+#define MPU401_INFO_UART_ONLY (1 << 5) /* No ENTER_UART cmd needed */
#define MPU401_MODE_BIT_INPUT 0
#define MPU401_MODE_BIT_OUTPUT 1
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index deff5a9..73334e0 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -603,11 +603,8 @@
read_unlock_irqrestore(&snd_pcm_link_rwlock, (flags)); \
} while (0)
-#define snd_pcm_group_for_each(pos, substream) \
- list_for_each(pos, &substream->group->substreams)
-
-#define snd_pcm_group_substream_entry(pos) \
- list_entry(pos, struct snd_pcm_substream, link_list)
+#define snd_pcm_group_for_each_entry(s, substream) \
+ list_for_each_entry(s, &substream->group->substreams, link_list)
static inline int snd_pcm_running(struct snd_pcm_substream *substream)
{
diff --git a/include/sound/version.h b/include/sound/version.h
index 42a18cc..e820f0e 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
/* include/version.h. Generated by alsa/ksync script. */
-#define CONFIG_SND_VERSION "1.0.14rc3"
-#define CONFIG_SND_DATE " (Wed Mar 14 07:25:50 2007 UTC)"
+#define CONFIG_SND_VERSION "1.0.14rc4"
+#define CONFIG_SND_DATE " (Wed May 09 09:51:39 2007 UTC)"
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
new file mode 100644
index 0000000..4eea637
--- /dev/null
+++ b/include/video/atmel_lcdc.h
@@ -0,0 +1,196 @@
+/*
+ * Header file for AT91/AT32 LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+ /* LCD Controller info data structure */
+struct atmel_lcdfb_info {
+ spinlock_t lock;
+ struct fb_info *info;
+ void __iomem *mmio;
+ unsigned long irq_base;
+
+ unsigned int guard_time;
+ struct platform_device *pdev;
+ struct clk *bus_clk;
+ struct clk *lcdc_clk;
+ unsigned int default_bpp;
+ unsigned int default_lcdcon2;
+ unsigned int default_dmacon;
+ void (*atmel_lcdfb_power_control)(int on);
+ struct fb_monspecs *default_monspecs;
+ u32 pseudo_palette[16];
+};
+
+#define ATMEL_LCDC_DMABADDR1 0x00
+#define ATMEL_LCDC_DMABADDR2 0x04
+#define ATMEL_LCDC_DMAFRMPT1 0x08
+#define ATMEL_LCDC_DMAFRMPT2 0x0c
+#define ATMEL_LCDC_DMAFRMADD1 0x10
+#define ATMEL_LCDC_DMAFRMADD2 0x14
+
+#define ATMEL_LCDC_DMAFRMCFG 0x18
+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
+#define ATMEL_LCDC_BLENGTH_OFFSET 24
+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON 0x1c
+#define ATMEL_LCDC_DMAEN (0x1 << 0)
+#define ATMEL_LCDC_DMARST (0x1 << 1)
+#define ATMEL_LCDC_DMABUSY (0x1 << 2)
+#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
+#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
+
+#define ATMEL_LCDC_DMA2DCFG 0x20
+#define ATMEL_LCDC_ADDRINC_OFFSET 0
+#define ATMEL_LCDC_ADDRINC (0xffff)
+#define ATMEL_LCDC_PIXELOFF_OFFSET 24
+#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
+
+#define ATMEL_LCDC_LCDCON1 0x0800
+#define ATMEL_LCDC_BYPASS (1 << 0)
+#define ATMEL_LCDC_CLKVAL_OFFSET 12
+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define ATMEL_LCDC_LINCNT (0x7ff << 21)
+
+#define ATMEL_LCDC_LCDCON2 0x0804
+#define ATMEL_LCDC_DISTYPE (3 << 0)
+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
+#define ATMEL_LCDC_SCANMOD (1 << 2)
+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
+#define ATMEL_LCDC_IFWIDTH (3 << 3)
+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
+#define ATMEL_LCDC_PIXELSIZE (7 << 5)
+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
+#define ATMEL_LCDC_INVVD (1 << 8)
+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
+#define ATMEL_LCDC_INVFRAME (1 << 9 )
+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
+#define ATMEL_LCDC_INVLINE (1 << 10)
+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
+#define ATMEL_LCDC_INVCLK (1 << 11)
+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
+#define ATMEL_LCDC_INVDVAL (1 << 12)
+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
+#define ATMEL_LCDC_CLKMOD (1 << 15)
+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
+#define ATMEL_LCDC_MEMOR (1 << 31)
+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
+
+#define ATMEL_LCDC_TIM1 0x0808
+#define ATMEL_LCDC_VFP (0xff << 0)
+#define ATMEL_LCDC_VBP_OFFSET 8
+#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
+#define ATMEL_LCDC_VPW_OFFSET 16
+#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
+#define ATMEL_LCDC_VHDLY_OFFSET 24
+#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2 0x080c
+#define ATMEL_LCDC_HBP (0xff << 0)
+#define ATMEL_LCDC_HPW_OFFSET 8
+#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
+#define ATMEL_LCDC_HFP_OFFSET 21
+#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG 0x0810
+#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
+#define ATMEL_LCDC_HOZVAL_OFFSET 21
+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO 0x0814
+#define ATMEL_LCDC_FIFOTH (0xffff)
+
+#define ATMEL_LCDC_MVAL 0x0818
+
+#define ATMEL_LCDC_DP1_2 0x081c
+#define ATMEL_LCDC_DP4_7 0x0820
+#define ATMEL_LCDC_DP3_5 0x0824
+#define ATMEL_LCDC_DP2_3 0x0828
+#define ATMEL_LCDC_DP5_7 0x082c
+#define ATMEL_LCDC_DP3_4 0x0830
+#define ATMEL_LCDC_DP4_5 0x0834
+#define ATMEL_LCDC_DP6_7 0x0838
+#define ATMEL_LCDC_DP1_2_VAL (0xff)
+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
+
+#define ATMEL_LCDC_PWRCON 0x083c
+#define ATMEL_LCDC_PWR (1 << 0)
+#define ATMEL_LCDC_GUARDT_OFFSET 1
+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
+#define ATMEL_LCDC_BUSY (1 << 31)
+
+#define ATMEL_LCDC_CONTRAST_CTR 0x0840
+#define ATMEL_LCDC_PS (3 << 0)
+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
+#define ATMEL_LCDC_POL (1 << 2)
+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
+#define ATMEL_LCDC_ENA (1 << 3)
+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL 0x0844
+#define ATMEL_LCDC_CVAL (0xff)
+
+#define ATMEL_LCDC_IER 0x0848
+#define ATMEL_LCDC_IDR 0x084c
+#define ATMEL_LCDC_IMR 0x0850
+#define ATMEL_LCDC_ISR 0x0854
+#define ATMEL_LCDC_ICR 0x0858
+#define ATMEL_LCDC_LNI (1 << 0)
+#define ATMEL_LCDC_LSTLNI (1 << 1)
+#define ATMEL_LCDC_EOFI (1 << 2)
+#define ATMEL_LCDC_UFLWI (1 << 4)
+#define ATMEL_LCDC_OWRI (1 << 5)
+#define ATMEL_LCDC_MERI (1 << 6)
+
+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */
diff --git a/include/video/pm3fb.h b/include/video/pm3fb.h
index 94c7d2d..d52e45a 100644
--- a/include/video/pm3fb.h
+++ b/include/video/pm3fb.h
@@ -7,9 +7,6 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
- *
- * $Header: /cvsroot/linux/drivers/video/pm3fb.h,v 1.1 2002/02/25 19:11:06 marcelo Exp $
- *
*/
#ifndef PM3FB_H
@@ -1119,117 +1116,10 @@
/* ***** pm3fb useful define and macro ***** */
/* ***************************************** */
-/* permedia3 -specific definitions */
-#define PM3_SCALE_TO_CLOCK(pr, fe, po) ((2 * PM3_REF_CLOCK * fe) / (pr * (1 << (po))))
-
-/* in case it's not in linux/pci.h */
-#ifndef PCI_DEVICE_ID_3DLABS_PERMEDIA3
-#define PCI_DEVICE_ID_3DLABS_PERMEDIA3 0x000a
-#endif
-
-/* max number of simultaneous board */
-#define PM3_MAX_BOARD 4
-
/* max size of options */
#define PM3_OPTIONS_SIZE 256
/* max size of font name */
#define PM3_FONTNAME_SIZE 40
-/* do we want accelerated console */
-#define PM3FB_USE_ACCEL 1
-
-/* for driver debugging ONLY */
-/* 0 = assert only, 1 = error, 2 = info, 3+ = verbose */
-/* define PM3FB_MASTER_DEBUG 1 */
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 3)
-#define PM3FB_TRACE
-#endif /* defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 3) */
-
-#ifdef PM3FB_MASTER_DEBUG
-#define DPRINTK(l,a,b...) do { if ((l) <= PM3FB_MASTER_DEBUG) printk("pm3fb: %s: " a, __FUNCTION__ , ## b); } while (0)
-#define DASSERT(t,a,b...) do { if (!(t)) printk("pm3fb: _assert failed: %s: " a, __FUNCTION__ , ## b); } while (0)
-#ifdef PM3FB_TRACE
-#define DTRACE printk("pm3fb: _enter %s\n", __FUNCTION__)
-#else /* PM3FB_TRACE */
-#define DTRACE
-#endif /* PM3FB_TRACE */
-#else /* PM3FB_MASTER_DEBUG */
-#define DPRINTK(l,a,b...)
-#define DASSERT(t,a,b...)
-#define DTRACE
-#endif /* PM3FB_MASTER_DEBUG */
-
-#if defined(PM3FB_MASTER_DEBUG) && (PM3FB_MASTER_DEBUG >= 2)
-#define PM3_SHOW_CUR_MODE pm3fb_show_cur_mode(l_fb_info)
-#else
-#define PM3_SHOW_CUR_MODE /* pm3fb_show_cur_mode() */
-#endif
-
-/* ******************************************** */
-/* ***** A bunch of register-access macro ***** */
-/* ******************************************** */
-
-#define PM3_WRITE_REG(r, v) fb_writel(v, (l_fb_info->vIOBase + r))
-#define PM3_READ_REG(r) fb_readl((l_fb_info->vIOBase + r))
-
-
-#define depth2bpp(d) ((d + 7L) & ~7L)
-#define depth2ByPP(d) (depth2bpp(d) / 8)
-
-#define depth_supported(d) ((d == 8) || (d == 12) || (d == 15) || (d == 16) || (d==32))
-
-
-#define PM3_WAIT(n) \
-do{ \
- while(PM3_READ_REG(PM3InFIFOSpace)<(n)); \
-} while(0)
-
-#define PM3_DELAY(x) do { \
- int delay = x; \
- unsigned char tmp; \
- while(delay--){tmp = PM3_READ_REG(PM3InFIFOSpace);}; \
-} while(0)
-
-#define PM3_SLOW_WRITE_REG(r,v) \
-do{ \
- DASSERT((l_fb_info->vIOBase != (unsigned char*)(-1)), "l_fb_info->vIOBase mapped in slow write\n"); \
- mb(); \
- PM3_WAIT(1); \
- mb(); \
- PM3_WRITE_REG(r,v); \
-} while(0)
-
-#define PM3_SET_INDEX(index) \
-do{ \
- PM3_SLOW_WRITE_REG(PM3RD_IndexHigh,(((index)>>8)&0xff)); \
- PM3_SLOW_WRITE_REG(PM3RD_IndexLow,((index)&0xff)); \
-} while(0)
-
-#define PM3_WRITE_DAC_REG(r, v) \
-do { \
- DASSERT((l_fb_info->vIOBase != (unsigned char*)(-1)), "l_fb_info->vIOBase mapped in write dac reg\n"); \
- PM3_SET_INDEX(r); \
- mb(); \
- PM3_WRITE_REG(PM3RD_IndexedData, v); \
-} while (0)
-
-/* next one is really a function, added as a macro to be consistent */
-#define PM3_READ_DAC_REG(r) pm3fb_read_dac_reg(l_fb_info, r)
-
-
-#define PM3_COLOR(c) \
-do { \
- if (l_fb_info->current_par->depth == 8) \
- { \
- c = (c & 0xFF); \
- c = c | (c << 8); \
- } \
- if ((l_fb_info->current_par->depth == 8) || (depth2bpp(l_fb_info->current_par->depth) == 16)) \
- { \
- c = (c & 0xFFFF); \
- c = c | (c << 16); \
- } \
-} while (0)
-
#endif /* PM3FB_H */
diff --git a/init/Kconfig b/init/Kconfig
index e63a017..4e009fd 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -475,13 +475,53 @@
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
+config ANON_INODES
+ bool "Enable anonymous inode source" if EMBEDDED
+ default y
+ help
+ Anonymous inode source for pseudo-files like epoll, signalfd,
+ timerfd and eventfd.
+
+ If unsure, say Y.
+
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
+ depends on ANON_INODES
help
Disabling this option will cause the kernel to be built without
support for epoll family of system calls.
+config SIGNALFD
+ bool "Enable signalfd() system call" if EMBEDDED
+ depends on ANON_INODES
+ default y
+ help
+ Enable the signalfd() system call that allows to receive signals
+ on a file descriptor.
+
+ If unsure, say Y.
+
+config TIMERFD
+ bool "Enable timerfd() system call" if EMBEDDED
+ depends on ANON_INODES
+ default y
+ help
+ Enable the timerfd() system call that allows to receive timer
+ events on a file descriptor.
+
+ If unsure, say Y.
+
+config EVENTFD
+ bool "Enable eventfd() system call" if EMBEDDED
+ depends on ANON_INODES
+ default y
+ help
+ Enable the eventfd() system call that allows to receive both
+ kernel notification (ie. KAIO) or userspace notifications.
+
+ If unsure, say Y.
+
config SHMEM
bool "Use full shmem filesystem" if EMBEDDED
default y
@@ -505,6 +545,7 @@
config SLUB_DEBUG
default y
bool "Enable SLUB debugging support" if EMBEDDED
+ depends on SLUB
help
SLUB has extensive debug support features. Disabling these can
result in significant savings in code size. This also disables
diff --git a/init/main.c b/init/main.c
index e8d080c..1940fa7 100644
--- a/init/main.c
+++ b/init/main.c
@@ -801,6 +801,7 @@
*/
init_pid_ns.child_reaper = current;
+ __set_special_pids(1, 1);
cad_pid = task_pid(current);
smp_prepare_cpus(max_cpus);
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index d17821d..fab5707 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -681,6 +681,7 @@
if (oflag & O_CREAT) {
if (dentry->d_inode) { /* entry already exists */
+ audit_inode(name, dentry->d_inode);
error = -EEXIST;
if (oflag & O_EXCL)
goto out;
@@ -693,6 +694,7 @@
error = -ENOENT;
if (!dentry->d_inode)
goto out;
+ audit_inode(name, dentry->d_inode);
filp = do_open(dentry, oflag);
}
@@ -840,6 +842,7 @@
if (unlikely(filp->f_op != &mqueue_file_operations))
goto out_fput;
info = MQUEUE_I(inode);
+ audit_inode(NULL, inode);
if (unlikely(!(filp->f_mode & FMODE_WRITE)))
goto out_fput;
@@ -923,6 +926,7 @@
if (unlikely(filp->f_op != &mqueue_file_operations))
goto out_fput;
info = MQUEUE_I(inode);
+ audit_inode(NULL, inode);
if (unlikely(!(filp->f_mode & FMODE_READ)))
goto out_fput;
diff --git a/kernel/audit.h b/kernel/audit.h
index a337023..815d6f5 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -83,6 +83,7 @@
u32 field_count;
char *filterkey; /* ties events to rules */
struct audit_field *fields;
+ struct audit_field *arch_f; /* quick access to arch field */
struct audit_field *inode_f; /* quick access to an inode field */
struct audit_watch *watch; /* associated watch */
struct list_head rlist; /* entry in audit_watch.rules list */
@@ -131,17 +132,19 @@
extern int selinux_audit_rule_update(void);
#ifdef CONFIG_AUDITSYSCALL
-extern void __audit_signal_info(int sig, struct task_struct *t);
-static inline void audit_signal_info(int sig, struct task_struct *t)
+extern int __audit_signal_info(int sig, struct task_struct *t);
+static inline int audit_signal_info(int sig, struct task_struct *t)
{
- if (unlikely(audit_pid && t->tgid == audit_pid))
- __audit_signal_info(sig, t);
+ if (unlikely((audit_pid && t->tgid == audit_pid) ||
+ (audit_signals && !audit_dummy_context())))
+ return __audit_signal_info(sig, t);
+ return 0;
}
extern enum audit_state audit_filter_inodes(struct task_struct *,
struct audit_context *);
extern void audit_set_auditable(struct audit_context *);
#else
-#define audit_signal_info(s,t)
+#define audit_signal_info(s,t) AUDIT_DISABLED
#define audit_filter_inodes(t,c) AUDIT_DISABLED
#define audit_set_auditable(c)
#endif
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 3749193..6c61263 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -311,6 +311,43 @@
return classes[class][AUDIT_WORD(syscall)] & AUDIT_BIT(syscall);
}
+static inline int audit_match_class_bits(int class, u32 *mask)
+{
+ int i;
+
+ if (classes[class]) {
+ for (i = 0; i < AUDIT_BITMASK_SIZE; i++)
+ if (mask[i] & classes[class][i])
+ return 0;
+ }
+ return 1;
+}
+
+static int audit_match_signal(struct audit_entry *entry)
+{
+ struct audit_field *arch = entry->rule.arch_f;
+
+ if (!arch) {
+ /* When arch is unspecified, we must check both masks on biarch
+ * as syscall number alone is ambiguous. */
+ return (audit_match_class_bits(AUDIT_CLASS_SIGNAL,
+ entry->rule.mask) &&
+ audit_match_class_bits(AUDIT_CLASS_SIGNAL_32,
+ entry->rule.mask));
+ }
+
+ switch(audit_classify_arch(arch->val)) {
+ case 0: /* native */
+ return (audit_match_class_bits(AUDIT_CLASS_SIGNAL,
+ entry->rule.mask));
+ case 1: /* 32bit on biarch */
+ return (audit_match_class_bits(AUDIT_CLASS_SIGNAL_32,
+ entry->rule.mask));
+ default:
+ return 1;
+ }
+}
+
/* Common user-space to kernel rule translation. */
static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
{
@@ -429,6 +466,7 @@
err = -EINVAL;
goto exit_free;
}
+ entry->rule.arch_f = f;
break;
case AUDIT_PERM:
if (f->val & ~15)
@@ -519,7 +557,6 @@
case AUDIT_FSGID:
case AUDIT_LOGINUID:
case AUDIT_PERS:
- case AUDIT_ARCH:
case AUDIT_MSGTYPE:
case AUDIT_PPID:
case AUDIT_DEVMAJOR:
@@ -531,6 +568,9 @@
case AUDIT_ARG2:
case AUDIT_ARG3:
break;
+ case AUDIT_ARCH:
+ entry->rule.arch_f = f;
+ break;
case AUDIT_SUBJ_USER:
case AUDIT_SUBJ_ROLE:
case AUDIT_SUBJ_TYPE:
@@ -1221,6 +1261,9 @@
#ifdef CONFIG_AUDITSYSCALL
if (!dont_count)
audit_n_rules++;
+
+ if (!audit_match_signal(entry))
+ audit_signals++;
#endif
mutex_unlock(&audit_filter_mutex);
@@ -1294,6 +1337,9 @@
#ifdef CONFIG_AUDITSYSCALL
if (!dont_count)
audit_n_rules--;
+
+ if (!audit_match_signal(entry))
+ audit_signals--;
#endif
mutex_unlock(&audit_filter_mutex);
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 628c7ac..e36481e 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -78,17 +78,15 @@
* for saving names from getname(). */
#define AUDIT_NAMES 20
-/* AUDIT_NAMES_RESERVED is the number of slots we reserve in the
- * audit_context from being used for nameless inodes from
- * path_lookup. */
-#define AUDIT_NAMES_RESERVED 7
-
/* Indicates that audit should log the full pathname. */
#define AUDIT_NAME_FULL -1
/* number of audit rules */
int audit_n_rules;
+/* determines whether we collect data for signals sent */
+int audit_signals;
+
/* When fs/namei.c:getname() is called, we store the pointer in name and
* we don't let putname() free it (instead we free all of the saved
* pointers at syscall exit time).
@@ -114,6 +112,9 @@
#define AUDIT_AUX_IPCPERM 0
+/* Number of target pids per aux struct. */
+#define AUDIT_AUX_PIDS 16
+
struct audit_aux_data_mq_open {
struct audit_aux_data d;
int oflag;
@@ -181,6 +182,13 @@
struct vfsmount *mnt;
};
+struct audit_aux_data_pids {
+ struct audit_aux_data d;
+ pid_t target_pid[AUDIT_AUX_PIDS];
+ u32 target_sid[AUDIT_AUX_PIDS];
+ int pid_count;
+};
+
/* The per-task audit context. */
struct audit_context {
int dummy; /* must be the first element */
@@ -201,6 +209,7 @@
struct vfsmount * pwdmnt;
struct audit_context *previous; /* For nested syscalls */
struct audit_aux_data *aux;
+ struct audit_aux_data *aux_pids;
/* Save things to print about task_struct */
pid_t pid, ppid;
@@ -209,6 +218,9 @@
unsigned long personality;
int arch;
+ pid_t target_pid;
+ u32 target_sid;
+
#if AUDIT_DEBUG
int put_count;
int ino_count;
@@ -654,6 +666,10 @@
context->aux = aux->next;
kfree(aux);
}
+ while ((aux = context->aux_pids)) {
+ context->aux_pids = aux->next;
+ kfree(aux);
+ }
}
static inline void audit_zero_context(struct audit_context *context,
@@ -795,6 +811,29 @@
audit_log_task_context(ab);
}
+static int audit_log_pid_context(struct audit_context *context, pid_t pid,
+ u32 sid)
+{
+ struct audit_buffer *ab;
+ char *s = NULL;
+ u32 len;
+ int rc = 0;
+
+ ab = audit_log_start(context, GFP_KERNEL, AUDIT_OBJ_PID);
+ if (!ab)
+ return 1;
+
+ if (selinux_sid_to_string(sid, &s, &len)) {
+ audit_log_format(ab, "opid=%d obj=(none)", pid);
+ rc = 1;
+ } else
+ audit_log_format(ab, "opid=%d obj=%s", pid, s);
+ audit_log_end(ab);
+ kfree(s);
+
+ return rc;
+}
+
static void audit_log_exit(struct audit_context *context, struct task_struct *tsk)
{
int i, call_panic = 0;
@@ -973,6 +1012,21 @@
audit_log_end(ab);
}
+ for (aux = context->aux_pids; aux; aux = aux->next) {
+ struct audit_aux_data_pids *axs = (void *)aux;
+ int i;
+
+ for (i = 0; i < axs->pid_count; i++)
+ if (audit_log_pid_context(context, axs->target_pid[i],
+ axs->target_sid[i]))
+ call_panic = 1;
+ }
+
+ if (context->target_pid &&
+ audit_log_pid_context(context, context->target_pid,
+ context->target_sid))
+ call_panic = 1;
+
if (context->pwd && context->pwdmnt) {
ab = audit_log_start(context, GFP_KERNEL, AUDIT_CWD);
if (ab) {
@@ -1193,6 +1247,10 @@
} else {
audit_free_names(context);
audit_free_aux(context);
+ context->aux = NULL;
+ context->aux_pids = NULL;
+ context->target_pid = 0;
+ context->target_sid = 0;
kfree(context->filterkey);
context->filterkey = NULL;
tsk->audit_context = context;
@@ -1226,6 +1284,7 @@
context->names[context->name_count].name_len = AUDIT_NAME_FULL;
context->names[context->name_count].name_put = 1;
context->names[context->name_count].ino = (unsigned long)-1;
+ context->names[context->name_count].osid = 0;
++context->name_count;
if (!context->pwd) {
read_lock(¤t->fs->lock);
@@ -1279,6 +1338,28 @@
#endif
}
+static int audit_inc_name_count(struct audit_context *context,
+ const struct inode *inode)
+{
+ if (context->name_count >= AUDIT_NAMES) {
+ if (inode)
+ printk(KERN_DEBUG "name_count maxed, losing inode data: "
+ "dev=%02x:%02x, inode=%lu",
+ MAJOR(inode->i_sb->s_dev),
+ MINOR(inode->i_sb->s_dev),
+ inode->i_ino);
+
+ else
+ printk(KERN_DEBUG "name_count maxed, losing inode data");
+ return 1;
+ }
+ context->name_count++;
+#if AUDIT_DEBUG
+ context->ino_count++;
+#endif
+ return 0;
+}
+
/* Copy inode data into an audit_names. */
static void audit_copy_inode(struct audit_names *name, const struct inode *inode)
{
@@ -1316,13 +1397,10 @@
else {
/* FIXME: how much do we care about inodes that have no
* associated name? */
- if (context->name_count >= AUDIT_NAMES - AUDIT_NAMES_RESERVED)
+ if (audit_inc_name_count(context, inode))
return;
- idx = context->name_count++;
+ idx = context->name_count - 1;
context->names[idx].name = NULL;
-#if AUDIT_DEBUG
- ++context->ino_count;
-#endif
}
audit_copy_inode(&context->names[idx], inode);
}
@@ -1346,7 +1424,7 @@
{
int idx;
struct audit_context *context = current->audit_context;
- const char *found_name = NULL;
+ const char *found_parent = NULL, *found_child = NULL;
int dirlen = 0;
if (!context->in_syscall)
@@ -1354,88 +1432,73 @@
/* determine matching parent */
if (!dname)
- goto update_context;
- for (idx = 0; idx < context->name_count; idx++)
- if (context->names[idx].ino == parent->i_ino) {
- const char *name = context->names[idx].name;
+ goto add_names;
- if (!name)
- continue;
+ /* parent is more likely, look for it first */
+ for (idx = 0; idx < context->name_count; idx++) {
+ struct audit_names *n = &context->names[idx];
- if (audit_compare_dname_path(dname, name, &dirlen) == 0) {
- context->names[idx].name_len = dirlen;
- found_name = name;
- break;
- }
+ if (!n->name)
+ continue;
+
+ if (n->ino == parent->i_ino &&
+ !audit_compare_dname_path(dname, n->name, &dirlen)) {
+ n->name_len = dirlen; /* update parent data in place */
+ found_parent = n->name;
+ goto add_names;
}
-
-update_context:
- idx = context->name_count;
- if (context->name_count == AUDIT_NAMES) {
- printk(KERN_DEBUG "name_count maxed and losing %s\n",
- found_name ?: "(null)");
- return;
}
- context->name_count++;
-#if AUDIT_DEBUG
- context->ino_count++;
-#endif
- /* Re-use the name belonging to the slot for a matching parent directory.
- * All names for this context are relinquished in audit_free_names() */
- context->names[idx].name = found_name;
- context->names[idx].name_len = AUDIT_NAME_FULL;
- context->names[idx].name_put = 0; /* don't call __putname() */
- if (!inode)
- context->names[idx].ino = (unsigned long)-1;
- else
- audit_copy_inode(&context->names[idx], inode);
+ /* no matching parent, look for matching child */
+ for (idx = 0; idx < context->name_count; idx++) {
+ struct audit_names *n = &context->names[idx];
- /* A parent was not found in audit_names, so copy the inode data for the
- * provided parent. */
- if (!found_name) {
- idx = context->name_count;
- if (context->name_count == AUDIT_NAMES) {
- printk(KERN_DEBUG
- "name_count maxed and losing parent inode data: dev=%02x:%02x, inode=%lu",
- MAJOR(parent->i_sb->s_dev),
- MINOR(parent->i_sb->s_dev),
- parent->i_ino);
- return;
+ if (!n->name)
+ continue;
+
+ /* strcmp() is the more likely scenario */
+ if (!strcmp(dname, n->name) ||
+ !audit_compare_dname_path(dname, n->name, &dirlen)) {
+ if (inode)
+ audit_copy_inode(n, inode);
+ else
+ n->ino = (unsigned long)-1;
+ found_child = n->name;
+ goto add_names;
}
- context->name_count++;
-#if AUDIT_DEBUG
- context->ino_count++;
-#endif
+ }
+
+add_names:
+ if (!found_parent) {
+ if (audit_inc_name_count(context, parent))
+ return;
+ idx = context->name_count - 1;
+ context->names[idx].name = NULL;
audit_copy_inode(&context->names[idx], parent);
}
-}
-/**
- * audit_inode_update - update inode info for last collected name
- * @inode: inode being audited
- *
- * When open() is called on an existing object with the O_CREAT flag, the inode
- * data audit initially collects is incorrect. This additional hook ensures
- * audit has the inode data for the actual object to be opened.
- */
-void __audit_inode_update(const struct inode *inode)
-{
- struct audit_context *context = current->audit_context;
- int idx;
+ if (!found_child) {
+ if (audit_inc_name_count(context, inode))
+ return;
+ idx = context->name_count - 1;
- if (!context->in_syscall || !inode)
- return;
+ /* Re-use the name belonging to the slot for a matching parent
+ * directory. All names for this context are relinquished in
+ * audit_free_names() */
+ if (found_parent) {
+ context->names[idx].name = found_parent;
+ context->names[idx].name_len = AUDIT_NAME_FULL;
+ /* don't call __putname() */
+ context->names[idx].name_put = 0;
+ } else {
+ context->names[idx].name = NULL;
+ }
- if (context->name_count == 0) {
- context->name_count++;
-#if AUDIT_DEBUG
- context->ino_count++;
-#endif
+ if (inode)
+ audit_copy_inode(&context->names[idx], inode);
+ else
+ context->names[idx].ino = (unsigned long)-1;
}
- idx = context->name_count - 1;
-
- audit_copy_inode(&context->names[idx], inode);
}
/**
@@ -1880,6 +1943,14 @@
return 0;
}
+void __audit_ptrace(struct task_struct *t)
+{
+ struct audit_context *context = current->audit_context;
+
+ context->target_pid = t->pid;
+ selinux_get_task_sid(t, &context->target_sid);
+}
+
/**
* audit_avc_path - record the granting or denial of permissions
* @dentry: dentry to record
@@ -1918,15 +1989,17 @@
* If the audit subsystem is being terminated, record the task (pid)
* and uid that is doing that.
*/
-void __audit_signal_info(int sig, struct task_struct *t)
+int __audit_signal_info(int sig, struct task_struct *t)
{
+ struct audit_aux_data_pids *axp;
+ struct task_struct *tsk = current;
+ struct audit_context *ctx = tsk->audit_context;
extern pid_t audit_sig_pid;
extern uid_t audit_sig_uid;
extern u32 audit_sig_sid;
- if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) {
- struct task_struct *tsk = current;
- struct audit_context *ctx = tsk->audit_context;
+ if (audit_pid && t->tgid == audit_pid &&
+ (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1)) {
audit_sig_pid = tsk->pid;
if (ctx)
audit_sig_uid = ctx->loginuid;
@@ -1934,4 +2007,72 @@
audit_sig_uid = tsk->uid;
selinux_get_task_sid(tsk, &audit_sig_sid);
}
+
+ if (!audit_signals) /* audit_context checked in wrapper */
+ return 0;
+
+ /* optimize the common case by putting first signal recipient directly
+ * in audit_context */
+ if (!ctx->target_pid) {
+ ctx->target_pid = t->tgid;
+ selinux_get_task_sid(t, &ctx->target_sid);
+ return 0;
+ }
+
+ axp = (void *)ctx->aux_pids;
+ if (!axp || axp->pid_count == AUDIT_AUX_PIDS) {
+ axp = kzalloc(sizeof(*axp), GFP_ATOMIC);
+ if (!axp)
+ return -ENOMEM;
+
+ axp->d.type = AUDIT_OBJ_PID;
+ axp->d.next = ctx->aux_pids;
+ ctx->aux_pids = (void *)axp;
+ }
+ BUG_ON(axp->pid_count > AUDIT_AUX_PIDS);
+
+ axp->target_pid[axp->pid_count] = t->tgid;
+ selinux_get_task_sid(t, &axp->target_sid[axp->pid_count]);
+ axp->pid_count++;
+
+ return 0;
+}
+
+/**
+ * audit_core_dumps - record information about processes that end abnormally
+ * @sig: signal value
+ *
+ * If a process ends with a core dump, something fishy is going on and we
+ * should record the event for investigation.
+ */
+void audit_core_dumps(long signr)
+{
+ struct audit_buffer *ab;
+ u32 sid;
+
+ if (!audit_enabled)
+ return;
+
+ if (signr == SIGQUIT) /* don't care for those */
+ return;
+
+ ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_ANOM_ABEND);
+ audit_log_format(ab, "auid=%u uid=%u gid=%u",
+ audit_get_loginuid(current->audit_context),
+ current->uid, current->gid);
+ selinux_get_task_sid(current, &sid);
+ if (sid) {
+ char *ctx = NULL;
+ u32 len;
+
+ if (selinux_sid_to_string(sid, &ctx, &len))
+ audit_log_format(ab, " ssid=%u", sid);
+ else
+ audit_log_format(ab, " subj=%s", ctx);
+ kfree(ctx);
+ }
+ audit_log_format(ab, " pid=%d comm=", current->pid);
+ audit_log_untrustedstring(ab, current->comm);
+ audit_log_format(ab, " sig=%ld", signr);
+ audit_log_end(ab);
}
diff --git a/kernel/compat.c b/kernel/compat.c
index cebb4c2..3bae374 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -475,8 +475,8 @@
return min_length;
}
-static int get_compat_itimerspec(struct itimerspec *dst,
- struct compat_itimerspec __user *src)
+int get_compat_itimerspec(struct itimerspec *dst,
+ const struct compat_itimerspec __user *src)
{
if (get_compat_timespec(&dst->it_interval, &src->it_interval) ||
get_compat_timespec(&dst->it_value, &src->it_value))
@@ -484,8 +484,8 @@
return 0;
}
-static int put_compat_itimerspec(struct compat_itimerspec __user *dst,
- struct itimerspec *src)
+int put_compat_itimerspec(struct compat_itimerspec __user *dst,
+ const struct itimerspec *src)
{
if (put_compat_timespec(&src->it_interval, &dst->it_interval) ||
put_compat_timespec(&src->it_value, &dst->it_value))
diff --git a/kernel/exit.c b/kernel/exit.c
index b0c6f0c..c6d14b8 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -24,6 +24,7 @@
#include <linux/pid_namespace.h>
#include <linux/ptrace.h>
#include <linux/profile.h>
+#include <linux/signalfd.h>
#include <linux/mount.h>
#include <linux/proc_fs.h>
#include <linux/kthread.h>
@@ -42,6 +43,7 @@
#include <linux/audit.h> /* for audit_free() */
#include <linux/resource.h>
#include <linux/blkdev.h>
+#include <linux/task_io_accounting_ops.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -82,6 +84,14 @@
sighand = rcu_dereference(tsk->sighand);
spin_lock(&sighand->siglock);
+ /*
+ * Notify that this sighand has been detached. This must
+ * be called with the tsk->sighand lock held. Also, this
+ * access tsk->sighand internally, so it must be called
+ * before tsk->sighand is reset.
+ */
+ signalfd_detach_locked(tsk);
+
posix_cpu_timers_exit(tsk);
if (atomic_dec_and_test(&sig->count))
posix_cpu_timers_exit_group(tsk);
@@ -113,6 +123,8 @@
sig->nvcsw += tsk->nvcsw;
sig->nivcsw += tsk->nivcsw;
sig->sched_time += tsk->sched_time;
+ sig->inblock += task_io_get_inblock(tsk);
+ sig->oublock += task_io_get_oublock(tsk);
sig = NULL; /* Marker for below. */
}
@@ -299,12 +311,12 @@
if (process_session(curr) != session) {
detach_pid(curr, PIDTYPE_SID);
set_signal_session(curr->signal, session);
- attach_pid(curr, PIDTYPE_SID, session);
+ attach_pid(curr, PIDTYPE_SID, find_pid(session));
}
if (process_group(curr) != pgrp) {
detach_pid(curr, PIDTYPE_PGID);
curr->signal->pgrp = pgrp;
- attach_pid(curr, PIDTYPE_PGID, pgrp);
+ attach_pid(curr, PIDTYPE_PGID, find_pid(pgrp));
}
}
@@ -1193,6 +1205,12 @@
p->nvcsw + sig->nvcsw + sig->cnvcsw;
psig->cnivcsw +=
p->nivcsw + sig->nivcsw + sig->cnivcsw;
+ psig->cinblock +=
+ task_io_get_inblock(p) +
+ sig->inblock + sig->cinblock;
+ psig->coublock +=
+ task_io_get_oublock(p) +
+ sig->oublock + sig->coublock;
spin_unlock_irq(&p->parent->sighand->siglock);
}
diff --git a/kernel/fork.c b/kernel/fork.c
index 5dd3979..49530e4 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -875,6 +875,7 @@
sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
+ sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
sig->sched_time = 0;
INIT_LIST_HEAD(&sig->cpu_timers[0]);
INIT_LIST_HEAD(&sig->cpu_timers[1]);
@@ -955,7 +956,7 @@
unsigned long stack_size,
int __user *parent_tidptr,
int __user *child_tidptr,
- int pid)
+ struct pid *pid)
{
int retval;
struct task_struct *p = NULL;
@@ -1022,7 +1023,7 @@
p->did_exec = 0;
delayacct_tsk_init(p); /* Must remain after dup_task_struct() */
copy_flags(clone_flags, p);
- p->pid = pid;
+ p->pid = pid_nr(pid);
retval = -EFAULT;
if (clone_flags & CLONE_PARENT_SETTID)
if (put_user(p->pid, parent_tidptr))
@@ -1251,13 +1252,13 @@
p->signal->tty = current->signal->tty;
p->signal->pgrp = process_group(current);
set_signal_session(p->signal, process_session(current));
- attach_pid(p, PIDTYPE_PGID, process_group(p));
- attach_pid(p, PIDTYPE_SID, process_session(p));
+ attach_pid(p, PIDTYPE_PGID, task_pgrp(current));
+ attach_pid(p, PIDTYPE_SID, task_session(current));
list_add_tail_rcu(&p->tasks, &init_task.tasks);
__get_cpu_var(process_counts)++;
}
- attach_pid(p, PIDTYPE_PID, p->pid);
+ attach_pid(p, PIDTYPE_PID, pid);
nr_threads++;
}
@@ -1321,7 +1322,8 @@
struct task_struct *task;
struct pt_regs regs;
- task = copy_process(CLONE_VM, 0, idle_regs(®s), 0, NULL, NULL, 0);
+ task = copy_process(CLONE_VM, 0, idle_regs(®s), 0, NULL, NULL,
+ &init_struct_pid);
if (!IS_ERR(task))
init_idle(task, cpu);
@@ -1371,7 +1373,7 @@
clone_flags |= CLONE_PTRACE;
}
- p = copy_process(clone_flags, stack_start, regs, stack_size, parent_tidptr, child_tidptr, nr);
+ p = copy_process(clone_flags, stack_start, regs, stack_size, parent_tidptr, child_tidptr, pid);
/*
* Do this prior waking up the new thread - the thread pointer
* might get invalid after that point, if the thread exits quickly.
@@ -1420,12 +1422,15 @@
#define ARCH_MIN_MMSTRUCT_ALIGN 0
#endif
-static void sighand_ctor(void *data, struct kmem_cache *cachep, unsigned long flags)
+static void sighand_ctor(void *data, struct kmem_cache *cachep,
+ unsigned long flags)
{
struct sighand_struct *sighand = data;
- if (flags & SLAB_CTOR_CONSTRUCTOR)
+ if (flags & SLAB_CTOR_CONSTRUCTOR) {
spin_lock_init(&sighand->siglock);
+ INIT_LIST_HEAD(&sighand->signalfd_list);
+ }
}
void __init proc_caches_init(void)
@@ -1451,7 +1456,6 @@
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
}
-
/*
* Check constraints on flags passed to the unshare system call and
* force unsharing of additional process context as appropriate.
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index ddde0ef..b4f1674 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -27,6 +27,10 @@
return len;
}
+#ifndef is_affinity_mask_valid
+#define is_affinity_mask_valid(val) 1
+#endif
+
int no_irq_affinity;
static int irq_affinity_write_proc(struct file *file, const char __user *buffer,
unsigned long count, void *data)
@@ -42,6 +46,9 @@
if (err)
return err;
+ if (!is_affinity_mask_valid(new_value))
+ return -EINVAL;
+
/*
* Do not allow disabling IRQs completely - it's a too easy
* way to make the system unusable accidentally :-) At least
diff --git a/kernel/pid.c b/kernel/pid.c
index d3ad724..eb66bd2 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -27,11 +27,13 @@
#include <linux/bootmem.h>
#include <linux/hash.h>
#include <linux/pid_namespace.h>
+#include <linux/init_task.h>
#define pid_hashfn(nr) hash_long((unsigned long)nr, pidhash_shift)
static struct hlist_head *pid_hash;
static int pidhash_shift;
static struct kmem_cache *pid_cachep;
+struct pid init_struct_pid = INIT_STRUCT_PID;
int pid_max = PID_MAX_DEFAULT;
@@ -247,13 +249,16 @@
}
EXPORT_SYMBOL_GPL(find_pid);
-int fastcall attach_pid(struct task_struct *task, enum pid_type type, int nr)
+/*
+ * attach_pid() must be called with the tasklist_lock write-held.
+ */
+int fastcall attach_pid(struct task_struct *task, enum pid_type type,
+ struct pid *pid)
{
struct pid_link *link;
- struct pid *pid;
link = &task->pids[type];
- link->pid = pid = find_pid(nr);
+ link->pid = pid;
hlist_add_head_rcu(&link->node, &pid->tasks[type]);
return 0;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 4d50e06..ad7949a 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -18,6 +18,7 @@
#include <linux/ptrace.h>
#include <linux/security.h>
#include <linux/signal.h>
+#include <linux/audit.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
@@ -161,6 +162,8 @@
{
int retval;
+ audit_ptrace(task);
+
retval = -EPERM;
if (task->pid <= 1)
goto out;
diff --git a/kernel/signal.c b/kernel/signal.c
index 2ac3a66..364fc95 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -21,6 +21,7 @@
#include <linux/syscalls.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
+#include <linux/signalfd.h>
#include <linux/capability.h>
#include <linux/freezer.h>
#include <linux/pid_namespace.h>
@@ -113,8 +114,7 @@
/* Given the mask, find the first available signal that should be serviced. */
-static int
-next_signal(struct sigpending *pending, sigset_t *mask)
+int next_signal(struct sigpending *pending, sigset_t *mask)
{
unsigned long i, *s, *m, x;
int sig = 0;
@@ -497,6 +497,11 @@
int error = -EINVAL;
if (!valid_signal(sig))
return error;
+
+ error = audit_signal_info(sig, t); /* Let audit system see the signal */
+ if (error)
+ return error;
+
error = -EPERM;
if ((info == SEND_SIG_NOINFO || (!is_si_special(info) && SI_FROMUSER(info)))
&& ((sig != SIGCONT) ||
@@ -506,10 +511,7 @@
&& !capable(CAP_KILL))
return error;
- error = security_task_kill(t, info, sig, 0);
- if (!error)
- audit_signal_info(sig, t); /* Let audit system see the signal */
- return error;
+ return security_task_kill(t, info, sig, 0);
}
/* forward decl */
@@ -630,6 +632,12 @@
int ret = 0;
/*
+ * Deliver the signal to listening signalfds. This must be called
+ * with the sighand lock held.
+ */
+ signalfd_notify(t, sig);
+
+ /*
* fast-pathed signals for kernel-internal things like SIGSTOP
* or SIGKILL.
*/
@@ -1280,6 +1288,11 @@
ret = 1;
goto out;
}
+ /*
+ * Deliver the signal to listening signalfds. This must be called
+ * with the sighand lock held.
+ */
+ signalfd_notify(p, sig);
list_add_tail(&q->list, &p->pending.list);
sigaddset(&p->pending.signal, sig);
@@ -1323,6 +1336,11 @@
q->info.si_overrun++;
goto out;
}
+ /*
+ * Deliver the signal to listening signalfds. This must be called
+ * with the sighand lock held.
+ */
+ signalfd_notify(p, sig);
/*
* Put this signal on the shared-pending queue.
@@ -1983,6 +2001,8 @@
/*
* If you change siginfo_t structure, please be sure
* this code is fixed accordingly.
+ * Please remember to update the signalfd_copyinfo() function
+ * inside fs/signalfd.c too, in case siginfo_t changes.
* It should never copy any pad contained in the structure
* to avoid security leaks, but must copy the generic
* 3 ints plus the relevant union member.
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index daabb74..fcee2a8 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -8,6 +8,8 @@
#include <linux/sched.h>
#include <linux/stop_machine.h>
#include <linux/syscalls.h>
+#include <linux/interrupt.h>
+
#include <asm/atomic.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
@@ -45,6 +47,7 @@
if (stopmachine_state == STOPMACHINE_DISABLE_IRQ
&& !irqs_disabled) {
local_irq_disable();
+ hard_irq_disable();
irqs_disabled = 1;
/* Ack: irqs disabled. */
smp_mb(); /* Must read state first. */
@@ -124,6 +127,7 @@
/* Make them disable irqs. */
local_irq_disable();
+ hard_irq_disable();
stopmachine_set_state(STOPMACHINE_DISABLE_IRQ);
return 0;
diff --git a/kernel/sys.c b/kernel/sys.c
index cdb7e94..872271c 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -14,6 +14,7 @@
#include <linux/prctl.h>
#include <linux/highuid.h>
#include <linux/fs.h>
+#include <linux/resource.h>
#include <linux/kernel.h>
#include <linux/kexec.h>
#include <linux/workqueue.h>
@@ -29,6 +30,7 @@
#include <linux/signal.h>
#include <linux/cn_proc.h>
#include <linux/getcpu.h>
+#include <linux/task_io_accounting_ops.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
@@ -658,7 +660,7 @@
int error = -EINVAL;
struct pid *pgrp;
- if (which > 2 || which < 0)
+ if (which > PRIO_USER || which < PRIO_PROCESS)
goto out;
/* normalize: avoid signed division (rounding problems) */
@@ -722,7 +724,7 @@
long niceval, retval = -ESRCH;
struct pid *pgrp;
- if (which > 2 || which < 0)
+ if (which > PRIO_USER || which < PRIO_PROCESS)
return -EINVAL;
read_lock(&tasklist_lock);
@@ -1486,7 +1488,7 @@
if (process_group(p) != pgid) {
detach_pid(p, PIDTYPE_PGID);
p->signal->pgrp = pgid;
- attach_pid(p, PIDTYPE_PGID, pgid);
+ attach_pid(p, PIDTYPE_PGID, find_pid(pgid));
}
err = 0;
@@ -2082,6 +2084,8 @@
r->ru_nivcsw = p->signal->cnivcsw;
r->ru_minflt = p->signal->cmin_flt;
r->ru_majflt = p->signal->cmaj_flt;
+ r->ru_inblock = p->signal->cinblock;
+ r->ru_oublock = p->signal->coublock;
if (who == RUSAGE_CHILDREN)
break;
@@ -2093,6 +2097,8 @@
r->ru_nivcsw += p->signal->nivcsw;
r->ru_minflt += p->signal->min_flt;
r->ru_majflt += p->signal->maj_flt;
+ r->ru_inblock += p->signal->inblock;
+ r->ru_oublock += p->signal->oublock;
t = p;
do {
utime = cputime_add(utime, t->utime);
@@ -2101,6 +2107,8 @@
r->ru_nivcsw += t->nivcsw;
r->ru_minflt += t->min_flt;
r->ru_majflt += t->maj_flt;
+ r->ru_inblock += task_io_get_inblock(t);
+ r->ru_oublock += task_io_get_oublock(t);
t = next_thread(t);
} while (t != p);
break;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index d7306d0..7e11e2c 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -141,3 +141,10 @@
cond_syscall(sys_bdflush);
cond_syscall(sys_ioprio_set);
cond_syscall(sys_ioprio_get);
+
+/* New file descriptors */
+cond_syscall(sys_signalfd);
+cond_syscall(sys_timerfd);
+cond_syscall(compat_sys_signalfd);
+cond_syscall(compat_sys_timerfd);
+cond_syscall(sys_eventfd);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 3db5c3c..51b6a6a 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -74,7 +74,7 @@
static struct timer_list watchdog_timer;
static DEFINE_SPINLOCK(watchdog_lock);
static cycle_t watchdog_last;
-static int watchdog_resumed;
+static unsigned long watchdog_resumed;
/*
* Interval: 0.5sec Threshold: 0.0625s
@@ -104,9 +104,7 @@
spin_lock(&watchdog_lock);
- resumed = watchdog_resumed;
- if (unlikely(resumed))
- watchdog_resumed = 0;
+ resumed = test_and_clear_bit(0, &watchdog_resumed);
wdnow = watchdog->read();
wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
@@ -151,9 +149,7 @@
}
static void clocksource_resume_watchdog(void)
{
- spin_lock(&watchdog_lock);
- watchdog_resumed = 1;
- spin_unlock(&watchdog_lock);
+ set_bit(0, &watchdog_resumed);
}
static void clocksource_check_watchdog(struct clocksource *cs)
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index f9217bf..3d1042f 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -273,6 +273,8 @@
unsigned long flags;
unsigned long now = read_persistent_clock();
+ clocksource_resume();
+
write_seqlock_irqsave(&xtime_lock, flags);
if (now && (now > timekeeping_suspend_time)) {
diff --git a/kernel/timer.c b/kernel/timer.c
index 59a28b1..5ec5490 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -92,24 +92,24 @@
/* Functions below help us manage 'deferrable' flag */
static inline unsigned int tbase_get_deferrable(tvec_base_t *base)
{
- return (unsigned int)((unsigned long)base & TBASE_DEFERRABLE_FLAG);
+ return ((unsigned int)(unsigned long)base & TBASE_DEFERRABLE_FLAG);
}
static inline tvec_base_t *tbase_get_base(tvec_base_t *base)
{
- return (tvec_base_t *)((unsigned long)base & ~TBASE_DEFERRABLE_FLAG);
+ return ((tvec_base_t *)((unsigned long)base & ~TBASE_DEFERRABLE_FLAG));
}
static inline void timer_set_deferrable(struct timer_list *timer)
{
- timer->base = (tvec_base_t *)((unsigned long)timer->base |
- TBASE_DEFERRABLE_FLAG);
+ timer->base = ((tvec_base_t *)((unsigned long)(timer->base) |
+ TBASE_DEFERRABLE_FLAG));
}
static inline void
timer_set_base(struct timer_list *timer, tvec_base_t *new_base)
{
- timer->base = (tvec_base_t *)((unsigned long)new_base |
+ timer->base = (tvec_base_t *)((unsigned long)(new_base) |
tbase_get_deferrable(timer->base));
}
@@ -1499,8 +1499,6 @@
prev = &curr->next;
}
- clocksource_resume();
-
write_seqlock_irqsave(&xtime_lock, flags);
if (ti == time_interpolator) {
/* we lost the best time-interpolator: */
diff --git a/lib/Kconfig b/lib/Kconfig
index 96d6e8c..2e7ae6b 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -23,6 +23,14 @@
the kernel tree does. Such modules that use library CRC16
functions require M here.
+config CRC_ITU_T
+ tristate "CRC ITU-T V.41 functions"
+ help
+ This option is provided for the case where no in-kernel-tree
+ modules require CRC ITU-T V.41 functions, but a module built outside
+ the kernel tree does. Such modules that use library CRC ITU-T V.41
+ functions require M here.
+
config CRC32
tristate "CRC32 functions"
default y
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ee05b8a..fbc5c62 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -438,6 +438,7 @@
config FAULT_INJECTION_STACKTRACE_FILTER
bool "stacktrace filter for fault-injection capabilities"
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
+ depends on !X86_64
select STACKTRACE
select FRAME_POINTER
help
diff --git a/lib/Makefile b/lib/Makefile
index ae57f35..c8c8e20 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -13,7 +13,7 @@
lib-y += kobject.o kref.o kobject_uevent.o klist.o
obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
- bust_spinlocks.o
+ bust_spinlocks.o hexdump.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
@@ -41,6 +41,7 @@
obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
+obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
diff --git a/lib/audit.c b/lib/audit.c
index 3b1289f..8e7dc1c 100644
--- a/lib/audit.c
+++ b/lib/audit.c
@@ -23,6 +23,16 @@
~0U
};
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+ return 0;
+}
+
int audit_classify_syscall(int abi, unsigned syscall)
{
switch(syscall) {
@@ -49,6 +59,7 @@
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
return 0;
}
diff --git a/lib/crc-itu-t.c b/lib/crc-itu-t.c
new file mode 100644
index 0000000..a63472b
--- /dev/null
+++ b/lib/crc-itu-t.c
@@ -0,0 +1,69 @@
+/*
+ * crc-itu-t.c
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/crc-itu-t.h>
+
+/** CRC table for the CRC ITU-T V.41 0x0x1021 (x^16 + x^12 + x^15 + 1) */
+const u16 crc_itu_t_table[256] = {
+ 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
+ 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
+ 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
+ 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
+ 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
+ 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
+ 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
+ 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
+ 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
+ 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
+ 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
+ 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
+ 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
+ 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
+ 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
+ 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
+ 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
+ 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
+ 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
+ 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
+ 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
+ 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
+ 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
+ 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
+ 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
+ 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
+ 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
+ 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
+ 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
+ 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
+ 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
+ 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
+};
+
+EXPORT_SYMBOL(crc_itu_t_table);
+
+/**
+ * crc_itu_t - Compute the CRC-ITU-T for the data buffer
+ *
+ * @crc: previous CRC value
+ * @buffer: data pointer
+ * @len: number of bytes in the buffer
+ *
+ * Returns the updated CRC value
+ */
+u16 crc_itu_t(u16 crc, const u8 *buffer, size_t len)
+{
+ while (len--)
+ crc = crc_itu_t_byte(crc, *buffer++);
+ return crc;
+}
+EXPORT_SYMBOL(crc_itu_t);
+
+MODULE_DESCRIPTION("CRC ITU-T V.41 calculations");
+MODULE_LICENSE("GPL");
+
diff --git a/lib/hexdump.c b/lib/hexdump.c
new file mode 100644
index 0000000..e6da5b7
--- /dev/null
+++ b/lib/hexdump.c
@@ -0,0 +1,104 @@
+/*
+ * lib/hexdump.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+/**
+ * hex_dump_to_buffer - convert a blob of data to "hex ASCII" in memory
+ * @buf: data blob to dump
+ * @len: number of bytes in the @buf
+ * @linebuf: where to put the converted data
+ * @linebuflen: total size of @linebuf, including space for terminating NUL
+ *
+ * hex_dump_to_buffer() works on one "line" of output at a time, i.e.,
+ * 16 bytes of input data converted to hex + ASCII output.
+ *
+ * Given a buffer of u8 data, hex_dump_to_buffer() converts the input data
+ * to a hex + ASCII dump at the supplied memory location.
+ * The converted output is always NUL-terminated.
+ *
+ * E.g.:
+ * hex_dump_to_buffer(frame->data, frame->len, linebuf, sizeof(linebuf));
+ *
+ * example output buffer:
+ * 40414243 44454647 48494a4b 4c4d4e4f @ABCDEFGHIJKLMNO
+ */
+void hex_dump_to_buffer(const void *buf, size_t len, char *linebuf,
+ size_t linebuflen)
+{
+ const u8 *ptr = buf;
+ u8 ch;
+ int j, lx = 0;
+
+ for (j = 0; (j < 16) && (j < len) && (lx + 3) < linebuflen; j++) {
+ if (j && !(j % 4))
+ linebuf[lx++] = ' ';
+ ch = ptr[j];
+ linebuf[lx++] = hex_asc(ch >> 4);
+ linebuf[lx++] = hex_asc(ch & 0x0f);
+ }
+ if ((lx + 2) < linebuflen) {
+ linebuf[lx++] = ' ';
+ linebuf[lx++] = ' ';
+ }
+ for (j = 0; (j < 16) && (j < len) && (lx + 2) < linebuflen; j++)
+ linebuf[lx++] = isprint(ptr[j]) ? ptr[j] : '.';
+ linebuf[lx++] = '\0';
+}
+EXPORT_SYMBOL(hex_dump_to_buffer);
+
+/**
+ * print_hex_dump - print a text hex dump to syslog for a binary blob of data
+ * @level: kernel log level (e.g. KERN_DEBUG)
+ * @prefix_type: controls whether prefix of an offset, address, or none
+ * is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS, %DUMP_PREFIX_NONE)
+ * @buf: data blob to dump
+ * @len: number of bytes in the @buf
+ *
+ * Given a buffer of u8 data, print_hex_dump() prints a hex + ASCII dump
+ * to the kernel log at the specified kernel log level, with an optional
+ * leading prefix.
+ *
+ * E.g.:
+ * print_hex_dump(KERN_DEBUG, DUMP_PREFIX_ADDRESS, frame->data, frame->len);
+ *
+ * Example output using %DUMP_PREFIX_OFFSET:
+ * 0009ab42: 40414243 44454647 48494a4b 4c4d4e4f @ABCDEFGHIJKLMNO
+ * Example output using %DUMP_PREFIX_ADDRESS:
+ * ffffffff88089af0: 70717273 74757677 78797a7b 7c7d7e7f pqrstuvwxyz{|}~.
+ */
+void print_hex_dump(const char *level, int prefix_type, void *buf, size_t len)
+{
+ u8 *ptr = buf;
+ int i, linelen, remaining = len;
+ unsigned char linebuf[100];
+
+ for (i = 0; i < len; i += 16) {
+ linelen = min(remaining, 16);
+ remaining -= 16;
+ hex_dump_to_buffer(ptr + i, linelen, linebuf, sizeof(linebuf));
+
+ switch (prefix_type) {
+ case DUMP_PREFIX_ADDRESS:
+ printk("%s%*p: %s\n", level,
+ (int)(2 * sizeof(void *)), ptr + i, linebuf);
+ break;
+ case DUMP_PREFIX_OFFSET:
+ printk("%s%.8x: %s\n", level, i, linebuf);
+ break;
+ default:
+ printk("%s%s\n", level, linebuf);
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL(print_hex_dump);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 63cd888..eec1481 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -588,31 +588,27 @@
}
/**
- * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
+ * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
* @mapping: address space structure to write
* @wbc: subtract the number of written pages from *@wbc->nr_to_write
+ * @writepage: function called for each page
+ * @data: data passed to writepage function
*
- * This is a library function, which implements the writepages()
- * address_space_operation.
- *
- * If a page is already under I/O, generic_writepages() skips it, even
+ * If a page is already under I/O, write_cache_pages() skips it, even
* if it's dirty. This is desirable behaviour for memory-cleaning writeback,
* but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
* and msync() need to guarantee that all the data which was dirty at the time
* the call was made get new I/O started against them. If wbc->sync_mode is
* WB_SYNC_ALL then we were called for data integrity and we must wait for
* existing IO to complete.
- *
- * Derived from mpage_writepages() - if you fix this you should check that
- * also!
*/
-int generic_writepages(struct address_space *mapping,
- struct writeback_control *wbc)
+int write_cache_pages(struct address_space *mapping,
+ struct writeback_control *wbc, writepage_t writepage,
+ void *data)
{
struct backing_dev_info *bdi = mapping->backing_dev_info;
int ret = 0;
int done = 0;
- int (*writepage)(struct page *page, struct writeback_control *wbc);
struct pagevec pvec;
int nr_pages;
pgoff_t index;
@@ -625,12 +621,6 @@
return 0;
}
- writepage = mapping->a_ops->writepage;
-
- /* deal with chardevs and other special file */
- if (!writepage)
- return 0;
-
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
@@ -682,8 +672,7 @@
continue;
}
- ret = (*writepage)(page, wbc);
- mapping_set_error(mapping, ret);
+ ret = (*writepage)(page, wbc, data);
if (unlikely(ret == AOP_WRITEPAGE_ACTIVATE))
unlock_page(page);
@@ -710,6 +699,38 @@
mapping->writeback_index = index;
return ret;
}
+EXPORT_SYMBOL(write_cache_pages);
+
+/*
+ * Function used by generic_writepages to call the real writepage
+ * function and set the mapping flags on error
+ */
+static int __writepage(struct page *page, struct writeback_control *wbc,
+ void *data)
+{
+ struct address_space *mapping = data;
+ int ret = mapping->a_ops->writepage(page, wbc);
+ mapping_set_error(mapping, ret);
+ return ret;
+}
+
+/**
+ * generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
+ * @mapping: address space structure to write
+ * @wbc: subtract the number of written pages from *@wbc->nr_to_write
+ *
+ * This is a library function, which implements the writepages()
+ * address_space_operation.
+ */
+int generic_writepages(struct address_space *mapping,
+ struct writeback_control *wbc)
+{
+ /* deal with chardevs and other special file */
+ if (!mapping->a_ops->writepage)
+ return 0;
+
+ return write_cache_pages(mapping, wbc, __writepage, mapping);
+}
EXPORT_SYMBOL(generic_writepages);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f9b5d6d..ae96dd8 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2284,7 +2284,7 @@
* was used and there are no special requirements, this is a convenient
* alternative
*/
-int __init early_pfn_to_nid(unsigned long pfn)
+int __meminit early_pfn_to_nid(unsigned long pfn)
{
int i;
diff --git a/mm/slub.c b/mm/slub.c
index bd2efae..b39c8a6 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -81,10 +81,14 @@
* PageActive The slab is used as a cpu cache. Allocations
* may be performed from the slab. The slab is not
* on any slab list and cannot be moved onto one.
+ * The cpu slab may be equipped with an additioanl
+ * lockless_freelist that allows lockless access to
+ * free objects in addition to the regular freelist
+ * that requires the slab lock.
*
* PageError Slab requires special handling due to debug
* options set. This moves slab handling out of
- * the fast path.
+ * the fast path and disables lockless freelists.
*/
static inline int SlabDebug(struct page *page)
@@ -1014,6 +1018,7 @@
set_freepointer(s, last, NULL);
page->freelist = start;
+ page->lockless_freelist = NULL;
page->inuse = 0;
out:
if (flags & __GFP_WAIT)
@@ -1276,6 +1281,23 @@
*/
static void deactivate_slab(struct kmem_cache *s, struct page *page, int cpu)
{
+ /*
+ * Merge cpu freelist into freelist. Typically we get here
+ * because both freelists are empty. So this is unlikely
+ * to occur.
+ */
+ while (unlikely(page->lockless_freelist)) {
+ void **object;
+
+ /* Retrieve object from cpu_freelist */
+ object = page->lockless_freelist;
+ page->lockless_freelist = page->lockless_freelist[page->offset];
+
+ /* And put onto the regular freelist */
+ object[page->offset] = page->freelist;
+ page->freelist = object;
+ page->inuse--;
+ }
s->cpu_slab[cpu] = NULL;
ClearPageActive(page);
@@ -1322,47 +1344,46 @@
}
/*
- * slab_alloc is optimized to only modify two cachelines on the fast path
- * (aside from the stack):
+ * Slow path. The lockless freelist is empty or we need to perform
+ * debugging duties.
*
- * 1. The page struct
- * 2. The first cacheline of the object to be allocated.
+ * Interrupts are disabled.
*
- * The only other cache lines that are read (apart from code) is the
- * per cpu array in the kmem_cache struct.
+ * Processing is still very fast if new objects have been freed to the
+ * regular freelist. In that case we simply take over the regular freelist
+ * as the lockless freelist and zap the regular freelist.
*
- * Fastpath is not possible if we need to get a new slab or have
- * debugging enabled (which means all slabs are marked with SlabDebug)
+ * If that is not working then we fall back to the partial lists. We take the
+ * first element of the freelist as the object to allocate now and move the
+ * rest of the freelist to the lockless freelist.
+ *
+ * And if we were unable to get a new slab from the partial slab lists then
+ * we need to allocate a new slab. This is slowest path since we may sleep.
*/
-static void *slab_alloc(struct kmem_cache *s,
- gfp_t gfpflags, int node, void *addr)
+static void *__slab_alloc(struct kmem_cache *s,
+ gfp_t gfpflags, int node, void *addr, struct page *page)
{
- struct page *page;
void **object;
- unsigned long flags;
- int cpu;
+ int cpu = smp_processor_id();
- local_irq_save(flags);
- cpu = smp_processor_id();
- page = s->cpu_slab[cpu];
if (!page)
goto new_slab;
slab_lock(page);
if (unlikely(node != -1 && page_to_nid(page) != node))
goto another_slab;
-redo:
+load_freelist:
object = page->freelist;
if (unlikely(!object))
goto another_slab;
if (unlikely(SlabDebug(page)))
goto debug;
-have_object:
- page->inuse++;
- page->freelist = object[page->offset];
+ object = page->freelist;
+ page->lockless_freelist = object[page->offset];
+ page->inuse = s->objects;
+ page->freelist = NULL;
slab_unlock(page);
- local_irq_restore(flags);
return object;
another_slab:
@@ -1370,11 +1391,11 @@
new_slab:
page = get_partial(s, gfpflags, node);
- if (likely(page)) {
+ if (page) {
have_slab:
s->cpu_slab[cpu] = page;
SetPageActive(page);
- goto redo;
+ goto load_freelist;
}
page = new_slab(s, gfpflags, node);
@@ -1397,7 +1418,7 @@
discard_slab(s, page);
page = s->cpu_slab[cpu];
slab_lock(page);
- goto redo;
+ goto load_freelist;
}
/* New slab does not fit our expectations */
flush_slab(s, s->cpu_slab[cpu], cpu);
@@ -1405,16 +1426,52 @@
slab_lock(page);
goto have_slab;
}
- local_irq_restore(flags);
return NULL;
debug:
+ object = page->freelist;
if (!alloc_object_checks(s, page, object))
goto another_slab;
if (s->flags & SLAB_STORE_USER)
set_track(s, object, TRACK_ALLOC, addr);
trace(s, page, object, 1);
init_object(s, object, 1);
- goto have_object;
+
+ page->inuse++;
+ page->freelist = object[page->offset];
+ slab_unlock(page);
+ return object;
+}
+
+/*
+ * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
+ * have the fastpath folded into their functions. So no function call
+ * overhead for requests that can be satisfied on the fastpath.
+ *
+ * The fastpath works by first checking if the lockless freelist can be used.
+ * If not then __slab_alloc is called for slow processing.
+ *
+ * Otherwise we can simply pick the next object from the lockless free list.
+ */
+static void __always_inline *slab_alloc(struct kmem_cache *s,
+ gfp_t gfpflags, int node, void *addr)
+{
+ struct page *page;
+ void **object;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ page = s->cpu_slab[smp_processor_id()];
+ if (unlikely(!page || !page->lockless_freelist ||
+ (node != -1 && page_to_nid(page) != node)))
+
+ object = __slab_alloc(s, gfpflags, node, addr, page);
+
+ else {
+ object = page->lockless_freelist;
+ page->lockless_freelist = object[page->offset];
+ }
+ local_irq_restore(flags);
+ return object;
}
void *kmem_cache_alloc(struct kmem_cache *s, gfp_t gfpflags)
@@ -1432,20 +1489,19 @@
#endif
/*
- * The fastpath only writes the cacheline of the page struct and the first
- * cacheline of the object.
+ * Slow patch handling. This may still be called frequently since objects
+ * have a longer lifetime than the cpu slabs in most processing loads.
*
- * We read the cpu_slab cacheline to check if the slab is the per cpu
- * slab for this processor.
+ * So we still attempt to reduce cache line usage. Just take the slab
+ * lock and free the item. If there is no additional partial page
+ * handling required then we can return immediately.
*/
-static void slab_free(struct kmem_cache *s, struct page *page,
+static void __slab_free(struct kmem_cache *s, struct page *page,
void *x, void *addr)
{
void *prior;
void **object = (void *)x;
- unsigned long flags;
- local_irq_save(flags);
slab_lock(page);
if (unlikely(SlabDebug(page)))
@@ -1475,7 +1531,6 @@
out_unlock:
slab_unlock(page);
- local_irq_restore(flags);
return;
slab_empty:
@@ -1487,7 +1542,6 @@
slab_unlock(page);
discard_slab(s, page);
- local_irq_restore(flags);
return;
debug:
@@ -1502,6 +1556,34 @@
goto checks_ok;
}
+/*
+ * Fastpath with forced inlining to produce a kfree and kmem_cache_free that
+ * can perform fastpath freeing without additional function calls.
+ *
+ * The fastpath is only possible if we are freeing to the current cpu slab
+ * of this processor. This typically the case if we have just allocated
+ * the item before.
+ *
+ * If fastpath is not possible then fall back to __slab_free where we deal
+ * with all sorts of special processing.
+ */
+static void __always_inline slab_free(struct kmem_cache *s,
+ struct page *page, void *x, void *addr)
+{
+ void **object = (void *)x;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (likely(page == s->cpu_slab[smp_processor_id()] &&
+ !SlabDebug(page))) {
+ object[page->offset] = page->lockless_freelist;
+ page->lockless_freelist = object;
+ } else
+ __slab_free(s, page, x, addr);
+
+ local_irq_restore(flags);
+}
+
void kmem_cache_free(struct kmem_cache *s, void *x)
{
struct page *page;
@@ -2363,9 +2445,8 @@
register_cpu_notifier(&slab_notifier);
#endif
- if (nr_cpu_ids) /* Remove when nr_cpu_ids is fixed upstream ! */
- kmem_size = offsetof(struct kmem_cache, cpu_slab)
- + nr_cpu_ids * sizeof(struct page *);
+ kmem_size = offsetof(struct kmem_cache, cpu_slab) +
+ nr_cpu_ids * sizeof(struct page *);
printk(KERN_INFO "SLUB: Genslabs=%d, HWalign=%d, Order=%d-%d, MinObjects=%d,"
" Processors=%d, Nodes=%d\n",
diff --git a/mm/thrash.c b/mm/thrash.c
index 9ef9071..c4c5205 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -48,9 +48,8 @@
if (current_interval < current->mm->last_interval)
current->mm->token_priority++;
else {
- current->mm->token_priority--;
- if (unlikely(current->mm->token_priority < 0))
- current->mm->token_priority = 0;
+ if (likely(current->mm->token_priority > 0))
+ current->mm->token_priority--;
}
/* Check if we deserve the token */
if (current->mm->token_priority >
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 9832d9a..8faf27e 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -698,7 +698,7 @@
{
struct delayed_work *vmstat_work = &per_cpu(vmstat_work, cpu);
- INIT_DELAYED_WORK(vmstat_work, vmstat_update);
+ INIT_DELAYED_WORK_DEFERRABLE(vmstat_work, vmstat_update);
schedule_delayed_work_on(cpu, vmstat_work, HZ + cpu);
}
diff --git a/net/Kconfig b/net/Kconfig
index caeacd1..f3de729 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -218,6 +218,7 @@
bool
menu "Wireless"
+ depends on !S390
source "net/wireless/Kconfig"
source "net/mac80211/Kconfig"
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index 43dd86f..2a72aa9 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig HAMRADIO
- depends on NET
+ depends on NET && !S390
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y
diff --git a/net/bluetooth/Kconfig b/net/bluetooth/Kconfig
index 6929490..7725da9 100644
--- a/net/bluetooth/Kconfig
+++ b/net/bluetooth/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig BT
- depends on NET
+ depends on NET && !S390
tristate "Bluetooth subsystem support"
help
Bluetooth is low-cost, low-power, short-range wireless technology.
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index d342e89..ceadfcf 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -174,7 +174,7 @@
static int hidp_hidinput_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct hidp_session *session = hid->driver_data;
return hidp_queue_event(session, dev, type, code, value);
@@ -182,7 +182,7 @@
static int hidp_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
- struct hidp_session *session = dev->private;
+ struct hidp_session *session = input_get_drvdata(dev);
return hidp_queue_event(session, dev, type, code, value);
}
@@ -630,7 +630,7 @@
struct input_dev *input = session->input;
int i;
- input->private = session;
+ input_set_drvdata(input, session);
input->name = "Bluetooth HID Boot Protocol Device";
@@ -663,7 +663,7 @@
input->relbit[0] |= BIT(REL_WHEEL);
}
- input->cdev.dev = hidp_get_device(session);
+ input->dev.parent = hidp_get_device(session);
input->event = hidp_input_event;
@@ -737,10 +737,8 @@
list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
hidp_send_report(session, report);
- if (hidinput_connect(hid) == 0) {
+ if (hidinput_connect(hid) == 0)
hid->claimed |= HID_CLAIMED_INPUT;
- hid_ff_init(hid);
- }
}
int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, struct socket *intr_sock)
@@ -864,7 +862,7 @@
if (session->hid)
hid_free_device(session->hid);
- kfree(session->input);
+ input_free_device(session->input);
kfree(session);
return err;
}
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index e3c26a9..a5e372b 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -19,7 +19,6 @@
#include <linux/rtnetlink.h>
#include <linux/jiffies.h>
#include <linux/spinlock.h>
-#include <linux/list.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
@@ -27,8 +26,7 @@
enum lw_bits {
- LW_RUNNING = 0,
- LW_SE_USED
+ LW_URGENT = 0,
};
static unsigned long linkwatch_flags;
@@ -37,17 +35,9 @@
static void linkwatch_event(struct work_struct *dummy);
static DECLARE_DELAYED_WORK(linkwatch_work, linkwatch_event);
-static LIST_HEAD(lweventlist);
+static struct net_device *lweventlist;
static DEFINE_SPINLOCK(lweventlist_lock);
-struct lw_event {
- struct list_head list;
- struct net_device *dev;
-};
-
-/* Avoid kmalloc() for most systems */
-static struct lw_event singleevent;
-
static unsigned char default_operstate(const struct net_device *dev)
{
if (!netif_carrier_ok(dev))
@@ -87,25 +77,102 @@
}
-/* Must be called with the rtnl semaphore held */
-void linkwatch_run_queue(void)
+static int linkwatch_urgent_event(struct net_device *dev)
{
- struct list_head head, *n, *next;
+ return netif_running(dev) && netif_carrier_ok(dev) &&
+ dev->qdisc != dev->qdisc_sleeping;
+}
+
+
+static void linkwatch_add_event(struct net_device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lweventlist_lock, flags);
+ dev->link_watch_next = lweventlist;
+ lweventlist = dev;
+ spin_unlock_irqrestore(&lweventlist_lock, flags);
+}
+
+
+static void linkwatch_schedule_work(int urgent)
+{
+ unsigned long delay = linkwatch_nextevent - jiffies;
+
+ if (test_bit(LW_URGENT, &linkwatch_flags))
+ return;
+
+ /* Minimise down-time: drop delay for up event. */
+ if (urgent) {
+ if (test_and_set_bit(LW_URGENT, &linkwatch_flags))
+ return;
+ delay = 0;
+ }
+
+ /* If we wrap around we'll delay it by at most HZ. */
+ if (delay > HZ)
+ delay = 0;
+
+ /*
+ * This is true if we've scheduled it immeditately or if we don't
+ * need an immediate execution and it's already pending.
+ */
+ if (schedule_delayed_work(&linkwatch_work, delay) == !delay)
+ return;
+
+ /* Don't bother if there is nothing urgent. */
+ if (!test_bit(LW_URGENT, &linkwatch_flags))
+ return;
+
+ /* It's already running which is good enough. */
+ if (!cancel_delayed_work(&linkwatch_work))
+ return;
+
+ /* Otherwise we reschedule it again for immediate exection. */
+ schedule_delayed_work(&linkwatch_work, 0);
+}
+
+
+static void __linkwatch_run_queue(int urgent_only)
+{
+ struct net_device *next;
+
+ /*
+ * Limit the number of linkwatch events to one
+ * per second so that a runaway driver does not
+ * cause a storm of messages on the netlink
+ * socket. This limit does not apply to up events
+ * while the device qdisc is down.
+ */
+ if (!urgent_only)
+ linkwatch_nextevent = jiffies + HZ;
+ /* Limit wrap-around effect on delay. */
+ else if (time_after(linkwatch_nextevent, jiffies + HZ))
+ linkwatch_nextevent = jiffies;
+
+ clear_bit(LW_URGENT, &linkwatch_flags);
spin_lock_irq(&lweventlist_lock);
- list_replace_init(&lweventlist, &head);
+ next = lweventlist;
+ lweventlist = NULL;
spin_unlock_irq(&lweventlist_lock);
- list_for_each_safe(n, next, &head) {
- struct lw_event *event = list_entry(n, struct lw_event, list);
- struct net_device *dev = event->dev;
+ while (next) {
+ struct net_device *dev = next;
- if (event == &singleevent) {
- clear_bit(LW_SE_USED, &linkwatch_flags);
- } else {
- kfree(event);
+ next = dev->link_watch_next;
+
+ if (urgent_only && !linkwatch_urgent_event(dev)) {
+ linkwatch_add_event(dev);
+ continue;
}
+ /*
+ * Make sure the above read is complete since it can be
+ * rewritten as soon as we clear the bit below.
+ */
+ smp_mb__before_clear_bit();
+
/* We are about to handle this device,
* so new events can be accepted
*/
@@ -124,58 +191,39 @@
dev_put(dev);
}
+
+ if (lweventlist)
+ linkwatch_schedule_work(0);
+}
+
+
+/* Must be called with the rtnl semaphore held */
+void linkwatch_run_queue(void)
+{
+ __linkwatch_run_queue(0);
}
static void linkwatch_event(struct work_struct *dummy)
{
- /* Limit the number of linkwatch events to one
- * per second so that a runaway driver does not
- * cause a storm of messages on the netlink
- * socket
- */
- linkwatch_nextevent = jiffies + HZ;
- clear_bit(LW_RUNNING, &linkwatch_flags);
-
rtnl_lock();
- linkwatch_run_queue();
+ __linkwatch_run_queue(time_after(linkwatch_nextevent, jiffies));
rtnl_unlock();
}
void linkwatch_fire_event(struct net_device *dev)
{
+ int urgent = linkwatch_urgent_event(dev);
+
if (!test_and_set_bit(__LINK_STATE_LINKWATCH_PENDING, &dev->state)) {
- unsigned long flags;
- struct lw_event *event;
-
- if (test_and_set_bit(LW_SE_USED, &linkwatch_flags)) {
- event = kmalloc(sizeof(struct lw_event), GFP_ATOMIC);
-
- if (unlikely(event == NULL)) {
- clear_bit(__LINK_STATE_LINKWATCH_PENDING, &dev->state);
- return;
- }
- } else {
- event = &singleevent;
- }
-
dev_hold(dev);
- event->dev = dev;
- spin_lock_irqsave(&lweventlist_lock, flags);
- list_add_tail(&event->list, &lweventlist);
- spin_unlock_irqrestore(&lweventlist_lock, flags);
+ linkwatch_add_event(dev);
+ } else if (!urgent)
+ return;
- if (!test_and_set_bit(LW_RUNNING, &linkwatch_flags)) {
- unsigned long delay = linkwatch_nextevent - jiffies;
-
- /* If we wrap around we'll delay it by at most HZ. */
- if (delay > HZ)
- delay = 0;
- schedule_delayed_work(&linkwatch_work, delay);
- }
- }
+ linkwatch_schedule_work(urgent);
}
EXPORT_SYMBOL(linkwatch_fire_event);
diff --git a/net/ipv4/netfilter/arptable_filter.c b/net/ipv4/netfilter/arptable_filter.c
index 7edea2a..75c0230 100644
--- a/net/ipv4/netfilter/arptable_filter.c
+++ b/net/ipv4/netfilter/arptable_filter.c
@@ -15,128 +15,34 @@
#define FILTER_VALID_HOOKS ((1 << NF_ARP_IN) | (1 << NF_ARP_OUT) | \
(1 << NF_ARP_FORWARD))
-/* Standard entry. */
-struct arpt_standard
-{
- struct arpt_entry entry;
- struct arpt_standard_target target;
-};
-
-struct arpt_error_target
-{
- struct arpt_entry_target target;
- char errorname[ARPT_FUNCTION_MAXNAMELEN];
-};
-
-struct arpt_error
-{
- struct arpt_entry entry;
- struct arpt_error_target target;
-};
-
static struct
{
struct arpt_replace repl;
struct arpt_standard entries[3];
struct arpt_error term;
-} initial_table __initdata
-= { { "filter", FILTER_VALID_HOOKS, 4,
- sizeof(struct arpt_standard) * 3 + sizeof(struct arpt_error),
- { [NF_ARP_IN] = 0,
- [NF_ARP_OUT] = sizeof(struct arpt_standard),
- [NF_ARP_FORWARD] = 2 * sizeof(struct arpt_standard), },
- { [NF_ARP_IN] = 0,
- [NF_ARP_OUT] = sizeof(struct arpt_standard),
- [NF_ARP_FORWARD] = 2 * sizeof(struct arpt_standard), },
- 0, NULL, { } },
- {
- /* ARP_IN */
- {
- {
- {
- { 0 }, { 0 }, { 0 }, { 0 },
- 0, 0,
- { { 0, }, { 0, } },
- { { 0, }, { 0, } },
- 0, 0,
- 0, 0,
- 0, 0,
- "", "", { 0 }, { 0 },
- 0, 0
- },
- sizeof(struct arpt_entry),
- sizeof(struct arpt_standard),
- 0,
- { 0, 0 }, { } },
- { { { { ARPT_ALIGN(sizeof(struct arpt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 }
- },
- /* ARP_OUT */
- {
- {
- {
- { 0 }, { 0 }, { 0 }, { 0 },
- 0, 0,
- { { 0, }, { 0, } },
- { { 0, }, { 0, } },
- 0, 0,
- 0, 0,
- 0, 0,
- "", "", { 0 }, { 0 },
- 0, 0
- },
- sizeof(struct arpt_entry),
- sizeof(struct arpt_standard),
- 0,
- { 0, 0 }, { } },
- { { { { ARPT_ALIGN(sizeof(struct arpt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 }
- },
- /* ARP_FORWARD */
- {
- {
- {
- { 0 }, { 0 }, { 0 }, { 0 },
- 0, 0,
- { { 0, }, { 0, } },
- { { 0, }, { 0, } },
- 0, 0,
- 0, 0,
- 0, 0,
- "", "", { 0 }, { 0 },
- 0, 0
- },
- sizeof(struct arpt_entry),
- sizeof(struct arpt_standard),
- 0,
- { 0, 0 }, { } },
- { { { { ARPT_ALIGN(sizeof(struct arpt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 }
- }
- },
- /* ERROR */
- {
- {
- {
- { 0 }, { 0 }, { 0 }, { 0 },
- 0, 0,
- { { 0, }, { 0, } },
- { { 0, }, { 0, } },
- 0, 0,
- 0, 0,
- 0, 0,
- "", "", { 0 }, { 0 },
- 0, 0
- },
- sizeof(struct arpt_entry),
- sizeof(struct arpt_error),
- 0,
- { 0, 0 }, { } },
- { { { { ARPT_ALIGN(sizeof(struct arpt_error_target)), ARPT_ERROR_TARGET } },
- { } },
- "ERROR"
- }
- }
+} initial_table __initdata = {
+ .repl = {
+ .name = "filter",
+ .valid_hooks = FILTER_VALID_HOOKS,
+ .num_entries = 4,
+ .size = sizeof(struct arpt_standard) * 3 + sizeof(struct arpt_error),
+ .hook_entry = {
+ [NF_ARP_IN] = 0,
+ [NF_ARP_OUT] = sizeof(struct arpt_standard),
+ [NF_ARP_FORWARD] = 2 * sizeof(struct arpt_standard),
+ },
+ .underflow = {
+ [NF_ARP_IN] = 0,
+ [NF_ARP_OUT] = sizeof(struct arpt_standard),
+ [NF_ARP_FORWARD] = 2 * sizeof(struct arpt_standard),
+ },
+ },
+ .entries = {
+ ARPT_STANDARD_INIT(NF_ACCEPT), /* ARP_IN */
+ ARPT_STANDARD_INIT(NF_ACCEPT), /* ARP_OUT */
+ ARPT_STANDARD_INIT(NF_ACCEPT), /* ARP_FORWARD */
+ },
+ .term = ARPT_ERROR_INIT,
};
static struct arpt_table packet_filter = {
diff --git a/net/ipv4/netfilter/iptable_filter.c b/net/ipv4/netfilter/iptable_filter.c
index 4272890..4f51c1d 100644
--- a/net/ipv4/netfilter/iptable_filter.c
+++ b/net/ipv4/netfilter/iptable_filter.c
@@ -26,53 +26,29 @@
struct ipt_replace repl;
struct ipt_standard entries[3];
struct ipt_error term;
-} initial_table __initdata
-= { { "filter", FILTER_VALID_HOOKS, 4,
- sizeof(struct ipt_standard) * 3 + sizeof(struct ipt_error),
- { [NF_IP_LOCAL_IN] = 0,
- [NF_IP_FORWARD] = sizeof(struct ipt_standard),
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2 },
- { [NF_IP_LOCAL_IN] = 0,
- [NF_IP_FORWARD] = sizeof(struct ipt_standard),
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2 },
- 0, NULL, { } },
- {
- /* LOCAL_IN */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* FORWARD */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* LOCAL_OUT */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } }
- },
- /* ERROR */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_error),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_error_target)), IPT_ERROR_TARGET } },
- { } },
- "ERROR"
- }
- }
+} initial_table __initdata = {
+ .repl = {
+ .name = "filter",
+ .valid_hooks = FILTER_VALID_HOOKS,
+ .num_entries = 4,
+ .size = sizeof(struct ipt_standard) * 3 + sizeof(struct ipt_error),
+ .hook_entry = {
+ [NF_IP_LOCAL_IN] = 0,
+ [NF_IP_FORWARD] = sizeof(struct ipt_standard),
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2,
+ },
+ .underflow = {
+ [NF_IP_LOCAL_IN] = 0,
+ [NF_IP_FORWARD] = sizeof(struct ipt_standard),
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2,
+ },
+ },
+ .entries = {
+ IPT_STANDARD_INIT(NF_ACCEPT), /* LOCAL_IN */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* FORWARD */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
+ },
+ .term = IPT_ERROR_INIT, /* ERROR */
};
static struct xt_table packet_filter = {
@@ -105,7 +81,8 @@
if ((*pskb)->len < sizeof(struct iphdr)
|| ip_hdrlen(*pskb) < sizeof(struct iphdr)) {
if (net_ratelimit())
- printk("ipt_hook: happy cracking.\n");
+ printk("iptable_filter: ignoring short SOCK_RAW "
+ "packet.\n");
return NF_ACCEPT;
}
diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c
index 9278802..902446f 100644
--- a/net/ipv4/netfilter/iptable_mangle.c
+++ b/net/ipv4/netfilter/iptable_mangle.c
@@ -33,73 +33,35 @@
struct ipt_replace repl;
struct ipt_standard entries[5];
struct ipt_error term;
-} initial_table __initdata
-= { { "mangle", MANGLE_VALID_HOOKS, 6,
- sizeof(struct ipt_standard) * 5 + sizeof(struct ipt_error),
- { [NF_IP_PRE_ROUTING] = 0,
- [NF_IP_LOCAL_IN] = sizeof(struct ipt_standard),
- [NF_IP_FORWARD] = sizeof(struct ipt_standard) * 2,
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 3,
- [NF_IP_POST_ROUTING] = sizeof(struct ipt_standard) * 4 },
- { [NF_IP_PRE_ROUTING] = 0,
- [NF_IP_LOCAL_IN] = sizeof(struct ipt_standard),
- [NF_IP_FORWARD] = sizeof(struct ipt_standard) * 2,
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 3,
- [NF_IP_POST_ROUTING] = sizeof(struct ipt_standard) * 4 },
- 0, NULL, { } },
- {
- /* PRE_ROUTING */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* LOCAL_IN */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* FORWARD */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* LOCAL_OUT */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* POST_ROUTING */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_standard),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- },
- /* ERROR */
- { { { { 0 }, { 0 }, { 0 }, { 0 }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ipt_entry),
- sizeof(struct ipt_error),
- 0, { 0, 0 }, { } },
- { { { { IPT_ALIGN(sizeof(struct ipt_error_target)), IPT_ERROR_TARGET } },
- { } },
- "ERROR"
- }
- }
+} initial_table __initdata = {
+ .repl = {
+ .name = "mangle",
+ .valid_hooks = MANGLE_VALID_HOOKS,
+ .num_entries = 6,
+ .size = sizeof(struct ipt_standard) * 5 + sizeof(struct ipt_error),
+ .hook_entry = {
+ [NF_IP_PRE_ROUTING] = 0,
+ [NF_IP_LOCAL_IN] = sizeof(struct ipt_standard),
+ [NF_IP_FORWARD] = sizeof(struct ipt_standard) * 2,
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 3,
+ [NF_IP_POST_ROUTING] = sizeof(struct ipt_standard) * 4,
+ },
+ .underflow = {
+ [NF_IP_PRE_ROUTING] = 0,
+ [NF_IP_LOCAL_IN] = sizeof(struct ipt_standard),
+ [NF_IP_FORWARD] = sizeof(struct ipt_standard) * 2,
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 3,
+ [NF_IP_POST_ROUTING] = sizeof(struct ipt_standard) * 4,
+ },
+ },
+ .entries = {
+ IPT_STANDARD_INIT(NF_ACCEPT), /* PRE_ROUTING */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* LOCAL_IN */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* FORWARD */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* POST_ROUTING */
+ },
+ .term = IPT_ERROR_INIT, /* ERROR */
};
static struct xt_table packet_mangler = {
@@ -138,7 +100,8 @@
if ((*pskb)->len < sizeof(struct iphdr)
|| ip_hdrlen(*pskb) < sizeof(struct iphdr)) {
if (net_ratelimit())
- printk("ipt_hook: happy cracking.\n");
+ printk("iptable_mangle: ignoring short SOCK_RAW "
+ "packet.\n");
return NF_ACCEPT;
}
diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c
index 18c3d4c..d6e5033 100644
--- a/net/ipv4/netfilter/iptable_raw.c
+++ b/net/ipv4/netfilter/iptable_raw.c
@@ -5,6 +5,7 @@
*/
#include <linux/module.h>
#include <linux/netfilter_ipv4/ip_tables.h>
+#include <net/ip.h>
#define RAW_VALID_HOOKS ((1 << NF_IP_PRE_ROUTING) | (1 << NF_IP_LOCAL_OUT))
@@ -21,62 +22,18 @@
.size = sizeof(struct ipt_standard) * 2 + sizeof(struct ipt_error),
.hook_entry = {
[NF_IP_PRE_ROUTING] = 0,
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) },
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard)
+ },
.underflow = {
[NF_IP_PRE_ROUTING] = 0,
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) },
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard)
+ },
},
.entries = {
- /* PRE_ROUTING */
- {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
-
- /* LOCAL_OUT */
- {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
+ IPT_STANDARD_INIT(NF_ACCEPT), /* PRE_ROUTING */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
},
- /* ERROR */
- .term = {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_error),
- },
- .target = {
- .target = {
- .u = {
- .user = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_error_target)),
- .name = IPT_ERROR_TARGET,
- },
- },
- },
- .errorname = "ERROR",
- },
- }
+ .term = IPT_ERROR_INIT, /* ERROR */
};
static struct xt_table packet_raw = {
@@ -98,6 +55,24 @@
return ipt_do_table(pskb, hook, in, out, &packet_raw);
}
+static unsigned int
+ipt_local_hook(unsigned int hook,
+ struct sk_buff **pskb,
+ const struct net_device *in,
+ const struct net_device *out,
+ int (*okfn)(struct sk_buff *))
+{
+ /* root is playing with raw sockets. */
+ if ((*pskb)->len < sizeof(struct iphdr) ||
+ ip_hdrlen(*pskb) < sizeof(struct iphdr)) {
+ if (net_ratelimit())
+ printk("iptable_raw: ignoring short SOCK_RAW"
+ "packet.\n");
+ return NF_ACCEPT;
+ }
+ return ipt_do_table(pskb, hook, in, out, &packet_raw);
+}
+
/* 'raw' is the very first table. */
static struct nf_hook_ops ipt_ops[] = {
{
@@ -108,7 +83,7 @@
.owner = THIS_MODULE,
},
{
- .hook = ipt_hook,
+ .hook = ipt_local_hook,
.pf = PF_INET,
.hooknum = NF_IP_LOCAL_OUT,
.priority = NF_IP_PRI_RAW,
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index 2534f71..6740736 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -46,77 +46,20 @@
.hook_entry = {
[NF_IP_PRE_ROUTING] = 0,
[NF_IP_POST_ROUTING] = sizeof(struct ipt_standard),
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2 },
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2
+ },
.underflow = {
[NF_IP_PRE_ROUTING] = 0,
[NF_IP_POST_ROUTING] = sizeof(struct ipt_standard),
- [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2 },
+ [NF_IP_LOCAL_OUT] = sizeof(struct ipt_standard) * 2
+ },
},
.entries = {
- /* PRE_ROUTING */
- {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
- /* POST_ROUTING */
- {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
- /* LOCAL_OUT */
- {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
+ IPT_STANDARD_INIT(NF_ACCEPT), /* PRE_ROUTING */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* POST_ROUTING */
+ IPT_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
},
- /* ERROR */
- .term = {
- .entry = {
- .target_offset = sizeof(struct ipt_entry),
- .next_offset = sizeof(struct ipt_error),
- },
- .target = {
- .target = {
- .u = {
- .user = {
- .target_size = IPT_ALIGN(sizeof(struct ipt_error_target)),
- .name = IPT_ERROR_TARGET,
- },
- },
- },
- .errorname = "ERROR",
- },
- }
+ .term = IPT_ERROR_INIT, /* ERROR */
};
static struct xt_table nat_table = {
@@ -230,9 +173,7 @@
}
inline unsigned int
-alloc_null_binding(struct nf_conn *ct,
- struct nf_nat_info *info,
- unsigned int hooknum)
+alloc_null_binding(struct nf_conn *ct, unsigned int hooknum)
{
/* Force range to this IP; let proto decide mapping for
per-proto parts (hence not IP_NAT_RANGE_PROTO_SPECIFIED).
@@ -251,9 +192,7 @@
}
unsigned int
-alloc_null_binding_confirmed(struct nf_conn *ct,
- struct nf_nat_info *info,
- unsigned int hooknum)
+alloc_null_binding_confirmed(struct nf_conn *ct, unsigned int hooknum)
{
__be32 ip
= (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC
@@ -275,8 +214,7 @@
unsigned int hooknum,
const struct net_device *in,
const struct net_device *out,
- struct nf_conn *ct,
- struct nf_nat_info *info)
+ struct nf_conn *ct)
{
int ret;
@@ -285,7 +223,7 @@
if (ret == NF_ACCEPT) {
if (!nf_nat_initialized(ct, HOOK2MANIP(hooknum)))
/* NUL mapping */
- ret = alloc_null_binding(ct, info, hooknum);
+ ret = alloc_null_binding(ct, hooknum);
}
return ret;
}
diff --git a/net/ipv4/netfilter/nf_nat_standalone.c b/net/ipv4/netfilter/nf_nat_standalone.c
index 64bbed2..55dac36 100644
--- a/net/ipv4/netfilter/nf_nat_standalone.c
+++ b/net/ipv4/netfilter/nf_nat_standalone.c
@@ -80,7 +80,6 @@
struct nf_conn *ct;
enum ip_conntrack_info ctinfo;
struct nf_conn_nat *nat;
- struct nf_nat_info *info;
/* maniptype == SRC for postrouting. */
enum nf_nat_manip_type maniptype = HOOK2MANIP(hooknum);
@@ -129,7 +128,6 @@
}
/* Fall thru... (Only ICMPs can be IP_CT_IS_REPLY) */
case IP_CT_NEW:
- info = &nat->info;
/* Seen it before? This can happen for loopback, retrans,
or local packets.. */
@@ -138,14 +136,13 @@
if (unlikely(nf_ct_is_confirmed(ct)))
/* NAT module was loaded late */
- ret = alloc_null_binding_confirmed(ct, info,
- hooknum);
+ ret = alloc_null_binding_confirmed(ct, hooknum);
else if (hooknum == NF_IP_LOCAL_IN)
/* LOCAL_IN hook doesn't have a chain! */
- ret = alloc_null_binding(ct, info, hooknum);
+ ret = alloc_null_binding(ct, hooknum);
else
ret = nf_nat_rule_find(pskb, hooknum, in, out,
- ct, info);
+ ct);
if (ret != NF_ACCEPT) {
return ret;
@@ -160,10 +157,8 @@
/* ESTABLISHED */
NF_CT_ASSERT(ctinfo == IP_CT_ESTABLISHED ||
ctinfo == (IP_CT_ESTABLISHED+IP_CT_IS_REPLY));
- info = &nat->info;
}
- NF_CT_ASSERT(info);
return nf_nat_packet(ct, ctinfo, hooknum, pskb);
}
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 37ab580..cdbc6c1 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -109,6 +109,17 @@
SNMP_MIB_SENTINEL
};
+/* Following RFC4293 items are displayed in /proc/net/netstat */
+static const struct snmp_mib snmp4_ipextstats_list[] = {
+ SNMP_MIB_ITEM("InNoRoutes", IPSTATS_MIB_INNOROUTES),
+ SNMP_MIB_ITEM("InTruncatedPkts", IPSTATS_MIB_INTRUNCATEDPKTS),
+ SNMP_MIB_ITEM("InMcastPkts", IPSTATS_MIB_INMCASTPKTS),
+ SNMP_MIB_ITEM("OutMcastPkts", IPSTATS_MIB_OUTMCASTPKTS),
+ SNMP_MIB_ITEM("InBcastPkts", IPSTATS_MIB_INBCASTPKTS),
+ SNMP_MIB_ITEM("OutBcastPkts", IPSTATS_MIB_OUTBCASTPKTS),
+ SNMP_MIB_SENTINEL
+};
+
static const struct snmp_mib snmp4_icmp_list[] = {
SNMP_MIB_ITEM("InMsgs", ICMP_MIB_INMSGS),
SNMP_MIB_ITEM("InErrors", ICMP_MIB_INERRORS),
@@ -338,6 +349,16 @@
snmp_fold_field((void **)net_statistics,
snmp4_net_list[i].entry));
+ seq_puts(seq, "\nIpExt:");
+ for (i = 0; snmp4_ipextstats_list[i].name != NULL; i++)
+ seq_printf(seq, " %s", snmp4_ipextstats_list[i].name);
+
+ seq_puts(seq, "\nIpExt:");
+ for (i = 0; snmp4_ipextstats_list[i].name != NULL; i++)
+ seq_printf(seq, " %lu",
+ snmp_fold_field((void **)ip_statistics,
+ snmp4_ipextstats_list[i].entry));
+
seq_putc(seq, '\n');
return 0;
}
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 66026df..4c7e95f 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -118,15 +118,15 @@
* Note about this hash function :
* Typical use is probably daddr = 0, only dport is going to vary hash
*/
-static inline unsigned int hash_port_and_addr(__u16 port, __be32 addr)
+static inline unsigned int udp_hash_port(__u16 port)
{
- addr ^= addr >> 16;
- addr ^= addr >> 8;
- return port ^ addr;
+ return port;
}
static inline int __udp_lib_port_inuse(unsigned int hash, int port,
- __be32 daddr, struct hlist_head udptable[])
+ const struct sock *this_sk,
+ struct hlist_head udptable[],
+ const struct udp_get_port_ops *ops)
{
struct sock *sk;
struct hlist_node *node;
@@ -138,7 +138,10 @@
inet = inet_sk(sk);
if (inet->num != port)
continue;
- if (inet->rcv_saddr == daddr)
+ if (this_sk) {
+ if (ops->saddr_cmp(sk, this_sk))
+ return 1;
+ } else if (ops->saddr_any(sk))
return 1;
}
return 0;
@@ -151,12 +154,11 @@
* @snum: port number to look up
* @udptable: hash list table, must be of UDP_HTABLE_SIZE
* @port_rover: pointer to record of last unallocated port
- * @saddr_comp: AF-dependent comparison of bound local IP addresses
+ * @ops: AF-dependent address operations
*/
int __udp_lib_get_port(struct sock *sk, unsigned short snum,
struct hlist_head udptable[], int *port_rover,
- int (*saddr_comp)(const struct sock *sk1,
- const struct sock *sk2 ) )
+ const struct udp_get_port_ops *ops)
{
struct hlist_node *node;
struct hlist_head *head;
@@ -176,8 +178,7 @@
for (i = 0; i < UDP_HTABLE_SIZE; i++, result++) {
int size;
- hash = hash_port_and_addr(result,
- inet_sk(sk)->rcv_saddr);
+ hash = ops->hash_port_and_rcv_saddr(result, sk);
head = &udptable[hash & (UDP_HTABLE_SIZE - 1)];
if (hlist_empty(head)) {
if (result > sysctl_local_port_range[1])
@@ -203,17 +204,16 @@
result = sysctl_local_port_range[0]
+ ((result - sysctl_local_port_range[0]) &
(UDP_HTABLE_SIZE - 1));
- hash = hash_port_and_addr(result, 0);
+ hash = udp_hash_port(result);
if (__udp_lib_port_inuse(hash, result,
- 0, udptable))
+ NULL, udptable, ops))
continue;
- if (!inet_sk(sk)->rcv_saddr)
+ if (ops->saddr_any(sk))
break;
- hash = hash_port_and_addr(result,
- inet_sk(sk)->rcv_saddr);
+ hash = ops->hash_port_and_rcv_saddr(result, sk);
if (! __udp_lib_port_inuse(hash, result,
- inet_sk(sk)->rcv_saddr, udptable))
+ sk, udptable, ops))
break;
}
if (i >= (1 << 16) / UDP_HTABLE_SIZE)
@@ -221,7 +221,7 @@
gotit:
*port_rover = snum = result;
} else {
- hash = hash_port_and_addr(snum, 0);
+ hash = udp_hash_port(snum);
head = &udptable[hash & (UDP_HTABLE_SIZE - 1)];
sk_for_each(sk2, node, head)
@@ -231,12 +231,11 @@
(!sk2->sk_reuse || !sk->sk_reuse) &&
(!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if ||
sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
- (*saddr_comp)(sk, sk2))
+ ops->saddr_cmp(sk, sk2))
goto fail;
- if (inet_sk(sk)->rcv_saddr) {
- hash = hash_port_and_addr(snum,
- inet_sk(sk)->rcv_saddr);
+ if (!ops->saddr_any(sk)) {
+ hash = ops->hash_port_and_rcv_saddr(snum, sk);
head = &udptable[hash & (UDP_HTABLE_SIZE - 1)];
sk_for_each(sk2, node, head)
@@ -248,7 +247,7 @@
!sk->sk_bound_dev_if ||
sk2->sk_bound_dev_if ==
sk->sk_bound_dev_if) &&
- (*saddr_comp)(sk, sk2))
+ ops->saddr_cmp(sk, sk2))
goto fail;
}
}
@@ -266,12 +265,12 @@
}
int udp_get_port(struct sock *sk, unsigned short snum,
- int (*scmp)(const struct sock *, const struct sock *))
+ const struct udp_get_port_ops *ops)
{
- return __udp_lib_get_port(sk, snum, udp_hash, &udp_port_rover, scmp);
+ return __udp_lib_get_port(sk, snum, udp_hash, &udp_port_rover, ops);
}
-int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
+static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
{
struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
@@ -280,9 +279,33 @@
inet1->rcv_saddr == inet2->rcv_saddr ));
}
+static int ipv4_rcv_saddr_any(const struct sock *sk)
+{
+ return !inet_sk(sk)->rcv_saddr;
+}
+
+static inline unsigned int ipv4_hash_port_and_addr(__u16 port, __be32 addr)
+{
+ addr ^= addr >> 16;
+ addr ^= addr >> 8;
+ return port ^ addr;
+}
+
+static unsigned int ipv4_hash_port_and_rcv_saddr(__u16 port,
+ const struct sock *sk)
+{
+ return ipv4_hash_port_and_addr(port, inet_sk(sk)->rcv_saddr);
+}
+
+const struct udp_get_port_ops udp_ipv4_ops = {
+ .saddr_cmp = ipv4_rcv_saddr_equal,
+ .saddr_any = ipv4_rcv_saddr_any,
+ .hash_port_and_rcv_saddr = ipv4_hash_port_and_rcv_saddr,
+};
+
static inline int udp_v4_get_port(struct sock *sk, unsigned short snum)
{
- return udp_get_port(sk, snum, ipv4_rcv_saddr_equal);
+ return udp_get_port(sk, snum, &udp_ipv4_ops);
}
/* UDP is nearly always wildcards out the wazoo, it makes no sense to try
@@ -297,8 +320,8 @@
unsigned int hash, hashwild;
int score, best = -1, hport = ntohs(dport);
- hash = hash_port_and_addr(hport, daddr);
- hashwild = hash_port_and_addr(hport, 0);
+ hash = ipv4_hash_port_and_addr(hport, daddr);
+ hashwild = udp_hash_port(hport);
read_lock(&udp_hash_lock);
@@ -1198,8 +1221,8 @@
struct sock *sk, *skw, *sknext;
int dif;
int hport = ntohs(uh->dest);
- unsigned int hash = hash_port_and_addr(hport, daddr);
- unsigned int hashwild = hash_port_and_addr(hport, 0);
+ unsigned int hash = ipv4_hash_port_and_addr(hport, daddr);
+ unsigned int hashwild = udp_hash_port(hport);
dif = skb->dev->ifindex;
diff --git a/net/ipv4/udp_impl.h b/net/ipv4/udp_impl.h
index 820a477..06d9419 100644
--- a/net/ipv4/udp_impl.h
+++ b/net/ipv4/udp_impl.h
@@ -5,14 +5,14 @@
#include <net/protocol.h>
#include <net/inet_common.h>
+extern const struct udp_get_port_ops udp_ipv4_ops;
+
extern int __udp4_lib_rcv(struct sk_buff *, struct hlist_head [], int );
extern void __udp4_lib_err(struct sk_buff *, u32, struct hlist_head []);
extern int __udp_lib_get_port(struct sock *sk, unsigned short snum,
struct hlist_head udptable[], int *port_rover,
- int (*)(const struct sock*,const struct sock*));
-extern int ipv4_rcv_saddr_equal(const struct sock *, const struct sock *);
-
+ const struct udp_get_port_ops *ops);
extern int udp_setsockopt(struct sock *sk, int level, int optname,
char __user *optval, int optlen);
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index f34fd68..3653b32 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -19,14 +19,15 @@
static int udplite_port_rover;
int udplite_get_port(struct sock *sk, unsigned short p,
- int (*c)(const struct sock *, const struct sock *))
+ const struct udp_get_port_ops *ops)
{
- return __udp_lib_get_port(sk, p, udplite_hash, &udplite_port_rover, c);
+ return __udp_lib_get_port(sk, p, udplite_hash,
+ &udplite_port_rover, ops);
}
static int udplite_v4_get_port(struct sock *sk, unsigned short snum)
{
- return udplite_get_port(sk, snum, ipv4_rcv_saddr_equal);
+ return udplite_get_port(sk, snum, &udp_ipv4_ops);
}
static int udplite_rcv(struct sk_buff *skb)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index d02685c..c7ea248 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4204,6 +4204,10 @@
return err;
ip6_null_entry.rt6i_idev = in6_dev_get(&loopback_dev);
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ ip6_prohibit_entry.rt6i_idev = in6_dev_get(&loopback_dev);
+ ip6_blk_hole_entry.rt6i_idev = in6_dev_get(&loopback_dev);
+#endif
register_netdevice_notifier(&ipv6_dev_notf);
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 6d8e4ac..14be0b9 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -660,6 +660,14 @@
Hop-by-hop options.
**********************************/
+/*
+ * Note: we cannot rely on skb->dst before we assign it in ip6_route_input().
+ */
+static inline struct inet6_dev *ipv6_skb_idev(struct sk_buff *skb)
+{
+ return skb->dst ? ip6_dst_idev(skb->dst) : __in6_dev_get(skb->dev);
+}
+
/* Router Alert as of RFC 2711 */
static int ipv6_hop_ra(struct sk_buff **skbp, int optoff)
@@ -688,25 +696,25 @@
if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
nh[optoff+1]);
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
+ IP6_INC_STATS_BH(ipv6_skb_idev(skb),
IPSTATS_MIB_INHDRERRORS);
goto drop;
}
pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
if (pkt_len <= IPV6_MAXPLEN) {
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+ IP6_INC_STATS_BH(ipv6_skb_idev(skb), IPSTATS_MIB_INHDRERRORS);
icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
return 0;
}
if (ipv6_hdr(skb)->payload_len) {
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+ IP6_INC_STATS_BH(ipv6_skb_idev(skb), IPSTATS_MIB_INHDRERRORS);
icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff);
return 0;
}
if (pkt_len > skb->len - sizeof(struct ipv6hdr)) {
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INTRUNCATEDPKTS);
+ IP6_INC_STATS_BH(ipv6_skb_idev(skb), IPSTATS_MIB_INTRUNCATEDPKTS);
goto drop;
}
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index be0ee8a..30a5cb1 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -235,7 +235,7 @@
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
hdr = ipv6_hdr(skb);
- deliver = likely(!(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI))) ||
+ deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
/*
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index f508171..4704b5f 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -463,10 +463,17 @@
*/
if (xrlim_allow(dst, 1*HZ))
ndisc_send_redirect(skb, n, target);
- } else if (ipv6_addr_type(&hdr->saddr)&(IPV6_ADDR_MULTICAST|IPV6_ADDR_LOOPBACK
- |IPV6_ADDR_LINKLOCAL)) {
+ } else {
+ int addrtype = ipv6_addr_type(&hdr->saddr);
+
/* This check is security critical. */
- goto error;
+ if (addrtype & (IPV6_ADDR_MULTICAST|IPV6_ADDR_LOOPBACK))
+ goto error;
+ if (addrtype & IPV6_ADDR_LINKLOCAL) {
+ icmpv6_send(skb, ICMPV6_DEST_UNREACH,
+ ICMPV6_NOT_NEIGHBOUR, 0, skb->dev);
+ goto error;
+ }
}
if (skb->len > dst_mtu(dst)) {
diff --git a/net/ipv6/netfilter/ip6table_filter.c b/net/ipv6/netfilter/ip6table_filter.c
index 76f0cf6..7e32e2a 100644
--- a/net/ipv6/netfilter/ip6table_filter.c
+++ b/net/ipv6/netfilter/ip6table_filter.c
@@ -24,53 +24,29 @@
struct ip6t_replace repl;
struct ip6t_standard entries[3];
struct ip6t_error term;
-} initial_table __initdata
-= { { "filter", FILTER_VALID_HOOKS, 4,
- sizeof(struct ip6t_standard) * 3 + sizeof(struct ip6t_error),
- { [NF_IP6_LOCAL_IN] = 0,
- [NF_IP6_FORWARD] = sizeof(struct ip6t_standard),
- [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 2 },
- { [NF_IP6_LOCAL_IN] = 0,
- [NF_IP6_FORWARD] = sizeof(struct ip6t_standard),
- [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 2 },
- 0, NULL, { } },
- {
- /* LOCAL_IN */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* FORWARD */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* LOCAL_OUT */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } }
- },
- /* ERROR */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_error),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_error_target)), IP6T_ERROR_TARGET } },
- { } },
- "ERROR"
- }
- }
+} initial_table __initdata = {
+ .repl = {
+ .name = "filter",
+ .valid_hooks = FILTER_VALID_HOOKS,
+ .num_entries = 4,
+ .size = sizeof(struct ip6t_standard) * 3 + sizeof(struct ip6t_error),
+ .hook_entry = {
+ [NF_IP6_LOCAL_IN] = 0,
+ [NF_IP6_FORWARD] = sizeof(struct ip6t_standard),
+ [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 2
+ },
+ .underflow = {
+ [NF_IP6_LOCAL_IN] = 0,
+ [NF_IP6_FORWARD] = sizeof(struct ip6t_standard),
+ [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 2
+ },
+ },
+ .entries = {
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* LOCAL_IN */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* FORWARD */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
+ },
+ .term = IP6T_ERROR_INIT, /* ERROR */
};
static struct xt_table packet_filter = {
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index a9f10e3..f2d2649 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -32,73 +32,35 @@
struct ip6t_replace repl;
struct ip6t_standard entries[5];
struct ip6t_error term;
-} initial_table __initdata
-= { { "mangle", MANGLE_VALID_HOOKS, 6,
- sizeof(struct ip6t_standard) * 5 + sizeof(struct ip6t_error),
- { [NF_IP6_PRE_ROUTING] = 0,
- [NF_IP6_LOCAL_IN] = sizeof(struct ip6t_standard),
- [NF_IP6_FORWARD] = sizeof(struct ip6t_standard) * 2,
- [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 3,
- [NF_IP6_POST_ROUTING] = sizeof(struct ip6t_standard) * 4},
- { [NF_IP6_PRE_ROUTING] = 0,
- [NF_IP6_LOCAL_IN] = sizeof(struct ip6t_standard),
- [NF_IP6_FORWARD] = sizeof(struct ip6t_standard) * 2,
- [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 3,
- [NF_IP6_POST_ROUTING] = sizeof(struct ip6t_standard) * 4},
- 0, NULL, { } },
- {
- /* PRE_ROUTING */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* LOCAL_IN */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* FORWARD */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* LOCAL_OUT */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } },
- /* POST_ROUTING */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_standard),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_standard_target)), "" } }, { } },
- -NF_ACCEPT - 1 } }
- },
- /* ERROR */
- { { { { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, { { { 0 } } }, "", "", { 0 }, { 0 }, 0, 0, 0 },
- 0,
- sizeof(struct ip6t_entry),
- sizeof(struct ip6t_error),
- 0, { 0, 0 }, { } },
- { { { { IP6T_ALIGN(sizeof(struct ip6t_error_target)), IP6T_ERROR_TARGET } },
- { } },
- "ERROR"
- }
- }
+} initial_table __initdata = {
+ .repl = {
+ .name = "mangle",
+ .valid_hooks = MANGLE_VALID_HOOKS,
+ .num_entries = 6,
+ .size = sizeof(struct ip6t_standard) * 5 + sizeof(struct ip6t_error),
+ .hook_entry = {
+ [NF_IP6_PRE_ROUTING] = 0,
+ [NF_IP6_LOCAL_IN] = sizeof(struct ip6t_standard),
+ [NF_IP6_FORWARD] = sizeof(struct ip6t_standard) * 2,
+ [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 3,
+ [NF_IP6_POST_ROUTING] = sizeof(struct ip6t_standard) * 4,
+ },
+ .underflow = {
+ [NF_IP6_PRE_ROUTING] = 0,
+ [NF_IP6_LOCAL_IN] = sizeof(struct ip6t_standard),
+ [NF_IP6_FORWARD] = sizeof(struct ip6t_standard) * 2,
+ [NF_IP6_LOCAL_OUT] = sizeof(struct ip6t_standard) * 3,
+ [NF_IP6_POST_ROUTING] = sizeof(struct ip6t_standard) * 4,
+ },
+ },
+ .entries = {
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* PRE_ROUTING */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* LOCAL_IN */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* FORWARD */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* POST_ROUTING */
+ },
+ .term = IP6T_ERROR_INIT, /* ERROR */
};
static struct xt_table packet_mangler = {
diff --git a/net/ipv6/netfilter/ip6table_raw.c b/net/ipv6/netfilter/ip6table_raw.c
index a3eb5b8..0acda45 100644
--- a/net/ipv6/netfilter/ip6table_raw.c
+++ b/net/ipv6/netfilter/ip6table_raw.c
@@ -35,56 +35,10 @@
},
},
.entries = {
- /* PRE_ROUTING */
- {
- .entry = {
- .target_offset = sizeof(struct ip6t_entry),
- .next_offset = sizeof(struct ip6t_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IP6T_ALIGN(sizeof(struct ip6t_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
-
- /* LOCAL_OUT */
- {
- .entry = {
- .target_offset = sizeof(struct ip6t_entry),
- .next_offset = sizeof(struct ip6t_standard),
- },
- .target = {
- .target = {
- .u = {
- .target_size = IP6T_ALIGN(sizeof(struct ip6t_standard_target)),
- },
- },
- .verdict = -NF_ACCEPT - 1,
- },
- },
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* PRE_ROUTING */
+ IP6T_STANDARD_INIT(NF_ACCEPT), /* LOCAL_OUT */
},
- /* ERROR */
- .term = {
- .entry = {
- .target_offset = sizeof(struct ip6t_entry),
- .next_offset = sizeof(struct ip6t_error),
- },
- .target = {
- .target = {
- .u = {
- .user = {
- .target_size = IP6T_ALIGN(sizeof(struct ip6t_error_target)),
- .name = IP6T_ERROR_TARGET,
- },
- },
- },
- .errorname = "ERROR",
- },
- }
+ .term = IP6T_ERROR_INIT, /* ERROR */
};
static struct xt_table packet_raw = {
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index b083c09..a7ae59c 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -52,9 +52,28 @@
DEFINE_SNMP_STAT(struct udp_mib, udp_stats_in6) __read_mostly;
+static int ipv6_rcv_saddr_any(const struct sock *sk)
+{
+ struct ipv6_pinfo *np = inet6_sk(sk);
+
+ return ipv6_addr_any(&np->rcv_saddr);
+}
+
+static unsigned int ipv6_hash_port_and_rcv_saddr(__u16 port,
+ const struct sock *sk)
+{
+ return port;
+}
+
+const struct udp_get_port_ops udp_ipv6_ops = {
+ .saddr_cmp = ipv6_rcv_saddr_equal,
+ .saddr_any = ipv6_rcv_saddr_any,
+ .hash_port_and_rcv_saddr = ipv6_hash_port_and_rcv_saddr,
+};
+
static inline int udp_v6_get_port(struct sock *sk, unsigned short snum)
{
- return udp_get_port(sk, snum, ipv6_rcv_saddr_equal);
+ return udp_get_port(sk, snum, &udp_ipv6_ops);
}
static struct sock *__udp6_lib_lookup(struct in6_addr *saddr, __be16 sport,
diff --git a/net/ipv6/udp_impl.h b/net/ipv6/udp_impl.h
index 6e252f3..36b0c11 100644
--- a/net/ipv6/udp_impl.h
+++ b/net/ipv6/udp_impl.h
@@ -6,6 +6,8 @@
#include <net/addrconf.h>
#include <net/inet_common.h>
+extern const struct udp_get_port_ops udp_ipv6_ops;
+
extern int __udp6_lib_rcv(struct sk_buff **, struct hlist_head [], int );
extern void __udp6_lib_err(struct sk_buff *, struct inet6_skb_parm *,
int , int , int , __be32 , struct hlist_head []);
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index f54016a..c40a513 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -37,7 +37,7 @@
static int udplite_v6_get_port(struct sock *sk, unsigned short snum)
{
- return udplite_get_port(sk, snum, ipv6_rcv_saddr_equal);
+ return udplite_get_port(sk, snum, &udp_ipv6_ops);
}
struct proto udplitev6_prot = {
diff --git a/net/irda/Kconfig b/net/irda/Kconfig
index 9efb17b..c8671a7 100644
--- a/net/irda/Kconfig
+++ b/net/irda/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig IRDA
- depends on NET
+ depends on NET && !S390
tristate "IrDA (infrared) subsystem support"
select CRC_CCITT
---help---
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 822917d..3e07e9d 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -17,6 +17,7 @@
* scan result table filtering (by capability (privacy, IBSS/BSS, WPA/RSN IE,
* SSID)
*/
+#include <linux/delay.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
@@ -27,7 +28,6 @@
#include <linux/rtnetlink.h>
#include <net/iw_handler.h>
#include <asm/types.h>
-#include <asm/delay.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index e132c8a..e8b5c2d 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -299,7 +299,6 @@
{
struct nf_conn *ct = (struct nf_conn *)nfct;
struct nf_conn_help *help = nfct_help(ct);
- struct nf_conntrack_l3proto *l3proto;
struct nf_conntrack_l4proto *l4proto;
typeof(nf_conntrack_destroyed) destroyed;
@@ -317,10 +316,6 @@
* destroy_conntrack() MUST NOT be called with a write lock
* to nf_conntrack_lock!!! -HW */
rcu_read_lock();
- l3proto = __nf_ct_l3proto_find(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.l3num);
- if (l3proto && l3proto->destroy)
- l3proto->destroy(ct);
-
l4proto = __nf_ct_l4proto_find(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.l3num,
ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.protonum);
if (l4proto && l4proto->destroy)
@@ -893,8 +888,13 @@
NF_CT_DUMP_TUPLE(newreply);
ct->tuplehash[IP_CT_DIR_REPLY].tuple = *newreply;
- if (!ct->master && help && help->expecting == 0)
- help->helper = __nf_ct_helper_find(newreply);
+ if (!ct->master && help && help->expecting == 0) {
+ struct nf_conntrack_helper *helper;
+ helper = __nf_ct_helper_find(newreply);
+ if (helper)
+ memset(&help->help, 0, sizeof(help->help));
+ help->helper = helper;
+ }
write_unlock_bh(&nf_conntrack_lock);
}
EXPORT_SYMBOL_GPL(nf_conntrack_alter_reply);
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index aa1a97e..d6d39e2 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -830,11 +830,6 @@
char *helpname;
int err;
- if (!help) {
- /* FIXME: we need to reallocate and rehash */
- return -EBUSY;
- }
-
/* don't change helper of sibling connections */
if (ct->master)
return -EINVAL;
@@ -843,25 +838,34 @@
if (err < 0)
return err;
- helper = __nf_conntrack_helper_find_byname(helpname);
- if (!helper) {
- if (!strcmp(helpname, ""))
- helper = NULL;
- else
- return -EINVAL;
- }
-
- if (help->helper) {
- if (!helper) {
+ if (!strcmp(helpname, "")) {
+ if (help && help->helper) {
/* we had a helper before ... */
nf_ct_remove_expectations(ct);
help->helper = NULL;
- } else {
- /* need to zero data of old helper */
- memset(&help->help, 0, sizeof(help->help));
}
+
+ return 0;
}
+ if (!help) {
+ /* FIXME: we need to reallocate and rehash */
+ return -EBUSY;
+ }
+
+ helper = __nf_conntrack_helper_find_byname(helpname);
+ if (helper == NULL)
+ return -EINVAL;
+
+ if (help->helper == helper)
+ return 0;
+
+ if (help->helper)
+ /* we had a helper before ... */
+ nf_ct_remove_expectations(ct);
+
+ /* need to zero data of old helper */
+ memset(&help->help, 0, sizeof(help->help));
help->helper = helper;
return 0;
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index f4ea8fe..189ded5 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -134,12 +134,66 @@
nf_ct_l3proto_module_put(match->family);
}
+#ifdef CONFIG_COMPAT
+struct compat_xt_conntrack_info
+{
+ compat_uint_t statemask;
+ compat_uint_t statusmask;
+ struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX];
+ struct in_addr sipmsk[IP_CT_DIR_MAX];
+ struct in_addr dipmsk[IP_CT_DIR_MAX];
+ compat_ulong_t expires_min;
+ compat_ulong_t expires_max;
+ u_int8_t flags;
+ u_int8_t invflags;
+};
+
+static void compat_from_user(void *dst, void *src)
+{
+ struct compat_xt_conntrack_info *cm = src;
+ struct xt_conntrack_info m = {
+ .statemask = cm->statemask,
+ .statusmask = cm->statusmask,
+ .expires_min = cm->expires_min,
+ .expires_max = cm->expires_max,
+ .flags = cm->flags,
+ .invflags = cm->invflags,
+ };
+ memcpy(m.tuple, cm->tuple, sizeof(m.tuple));
+ memcpy(m.sipmsk, cm->sipmsk, sizeof(m.sipmsk));
+ memcpy(m.dipmsk, cm->dipmsk, sizeof(m.dipmsk));
+ memcpy(dst, &m, sizeof(m));
+}
+
+static int compat_to_user(void __user *dst, void *src)
+{
+ struct xt_conntrack_info *m = src;
+ struct compat_xt_conntrack_info cm = {
+ .statemask = m->statemask,
+ .statusmask = m->statusmask,
+ .expires_min = m->expires_min,
+ .expires_max = m->expires_max,
+ .flags = m->flags,
+ .invflags = m->invflags,
+ };
+ memcpy(cm.tuple, m->tuple, sizeof(cm.tuple));
+ memcpy(cm.sipmsk, m->sipmsk, sizeof(cm.sipmsk));
+ memcpy(cm.dipmsk, m->dipmsk, sizeof(cm.dipmsk));
+ return copy_to_user(dst, &cm, sizeof(cm)) ? -EFAULT : 0;
+}
+#endif
+
static struct xt_match conntrack_match = {
.name = "conntrack",
.match = match,
.checkentry = checkentry,
.destroy = destroy,
.matchsize = sizeof(struct xt_conntrack_info),
+#ifdef CONFIG_COMPAT
+ .compatsize = sizeof(struct compat_xt_conntrack_info),
+ .compat_from_user = compat_from_user,
+ .compat_to_user = compat_to_user,
+#endif
.family = AF_INET,
.me = THIS_MODULE,
};
diff --git a/net/rxrpc/ar-peer.c b/net/rxrpc/ar-peer.c
index ce08b78..90fa107 100644
--- a/net/rxrpc/ar-peer.c
+++ b/net/rxrpc/ar-peer.c
@@ -59,14 +59,14 @@
ret = ip_route_output_key(&rt, &fl);
if (ret < 0) {
- kleave(" [route err %d]", ret);
+ _leave(" [route err %d]", ret);
return;
}
peer->if_mtu = dst_mtu(&rt->u.dst);
dst_release(&rt->u.dst);
- kleave(" [if_mtu %u]", peer->if_mtu);
+ _leave(" [if_mtu %u]", peer->if_mtu);
}
/*
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 3385ee5..f28bb2d 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -71,12 +71,9 @@
/* Kick device.
- Note, that this procedure can be called by a watchdog timer, so that
- we do not check dev->tbusy flag here.
- Returns: 0 - queue is empty.
- >0 - queue is not empty, but throttled.
- <0 - queue is not empty. Device is throttled, if dev->tbusy != 0.
+ Returns: 0 - queue is empty or throttled.
+ >0 - queue is not empty.
NOTE: Called under dev->queue_lock with locally disabled BH.
*/
@@ -115,7 +112,7 @@
kfree_skb(skb);
if (net_ratelimit())
printk(KERN_DEBUG "Dead loop on netdevice %s, fix it urgently!\n", dev->name);
- return -1;
+ goto out;
}
__get_cpu_var(netdev_rx_stat).cpu_collision++;
goto requeue;
@@ -135,10 +132,12 @@
netif_tx_unlock(dev);
}
spin_lock(&dev->queue_lock);
- return -1;
+ q = dev->qdisc;
+ goto out;
}
if (ret == NETDEV_TX_LOCKED && nolock) {
spin_lock(&dev->queue_lock);
+ q = dev->qdisc;
goto collision;
}
}
@@ -163,26 +162,28 @@
*/
requeue:
- if (skb->next)
+ if (unlikely(q == &noop_qdisc))
+ kfree_skb(skb);
+ else if (skb->next)
dev->gso_skb = skb;
else
q->ops->requeue(skb, q);
netif_schedule(dev);
- return 1;
+ return 0;
}
+
+out:
BUG_ON((int) q->q.qlen < 0);
return q->q.qlen;
}
void __qdisc_run(struct net_device *dev)
{
- if (unlikely(dev->qdisc == &noop_qdisc))
- goto out;
+ do {
+ if (!qdisc_restart(dev))
+ break;
+ } while (!netif_queue_stopped(dev));
- while (qdisc_restart(dev) < 0 && !netif_queue_stopped(dev))
- /* NOTHING */;
-
-out:
clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
}
@@ -544,6 +545,7 @@
void dev_deactivate(struct net_device *dev)
{
struct Qdisc *qdisc;
+ struct sk_buff *skb;
spin_lock_bh(&dev->queue_lock);
qdisc = dev->qdisc;
@@ -551,8 +553,12 @@
qdisc_reset(qdisc);
+ skb = dev->gso_skb;
+ dev->gso_skb = NULL;
spin_unlock_bh(&dev->queue_lock);
+ kfree_skb(skb);
+
dev_watchdog_down(dev);
/* Wait for outstanding dev_queue_xmit calls. */
@@ -561,11 +567,6 @@
/* Wait for outstanding qdisc_run calls. */
while (test_bit(__LINK_STATE_QDISC_RUNNING, &dev->state))
yield();
-
- if (dev->gso_skb) {
- kfree_skb(dev->gso_skb);
- dev->gso_skb = NULL;
- }
}
void dev_init_scheduler(struct net_device *dev)
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 269a6e1..6d7542c 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -75,7 +75,7 @@
band = res.classid;
}
band = TC_H_MIN(band) - 1;
- if (band > q->bands)
+ if (band >= q->bands)
return q->queues[q->prio2band[0]];
return q->queues[band];
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index d24914d..f05ad9a 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -94,14 +94,13 @@
struct net_device *dev = sch->dev;
struct teql_sched_data *q = qdisc_priv(sch);
- __skb_queue_tail(&q->q, skb);
- if (q->q.qlen <= dev->tx_queue_len) {
+ if (q->q.qlen < dev->tx_queue_len) {
+ __skb_queue_tail(&q->q, skb);
sch->bstats.bytes += skb->len;
sch->bstats.packets++;
return 0;
}
- __skb_unlink(skb, &q->q);
kfree_skb(skb);
sch->qstats.drops++;
return NET_XMIT_DROP;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 83a76ba..4dcdabf 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -4164,6 +4164,7 @@
rwlock_t *addr_lock;
int err = 0;
void *addrs;
+ void *buf;
int bytes_copied = 0;
if (len != sizeof(struct sctp_getaddrs_old))
@@ -4217,13 +4218,14 @@
}
}
+ buf = addrs;
list_for_each(pos, &bp->address_list) {
addr = list_entry(pos, struct sctp_sockaddr_entry, list);
memcpy(&temp, &addr->a, sizeof(temp));
sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp);
addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
- memcpy(addrs, &temp, addrlen);
- to += addrlen;
+ memcpy(buf, &temp, addrlen);
+ buf += addrlen;
bytes_copied += addrlen;
cnt ++;
if (cnt >= getaddrs.addr_num) break;
@@ -4266,6 +4268,7 @@
size_t space_left;
int bytes_copied = 0;
void *addrs;
+ void *buf;
if (len <= sizeof(struct sctp_getaddrs))
return -EINVAL;
@@ -4316,6 +4319,7 @@
}
}
+ buf = addrs;
list_for_each(pos, &bp->address_list) {
addr = list_entry(pos, struct sctp_sockaddr_entry, list);
memcpy(&temp, &addr->a, sizeof(temp));
@@ -4325,8 +4329,8 @@
err = -ENOMEM; /*fixme: right error?*/
goto error;
}
- memcpy(addrs, &temp, addrlen);
- to += addrlen;
+ memcpy(buf, &temp, addrlen);
+ buf += addrlen;
bytes_copied += addrlen;
cnt ++;
space_left -= addrlen;
@@ -5227,7 +5231,12 @@
/* Allocate HMAC for generating cookie. */
if (sctp_hmac_alg) {
tfm = crypto_alloc_hash(sctp_hmac_alg, 0, CRYPTO_ALG_ASYNC);
- if (!tfm) {
+ if (IS_ERR(tfm)) {
+ if (net_ratelimit()) {
+ printk(KERN_INFO
+ "SCTP: failed to load transform for %s: %ld\n",
+ sctp_hmac_alg, PTR_ERR(tfm));
+ }
err = -ENOSYS;
goto out;
}
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 661ea2d..bfecb35 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -141,11 +141,6 @@
* an ABORT, so we need to include it in the sac_info.
*/
if (chunk) {
- /* sctp_inqu_pop() has allready pulled off the chunk
- * header. We need to put it back temporarily
- */
- skb_push(chunk->skb, sizeof(sctp_chunkhdr_t));
-
/* Copy the chunk data to a new skb and reserve enough
* head room to use as notification.
*/
@@ -155,9 +150,6 @@
if (!skb)
goto fail;
- /* put back the chunk header now that we have a copy */
- skb_pull(chunk->skb, sizeof(sctp_chunkhdr_t));
-
/* Embed the event fields inside the cloned skb. */
event = sctp_skb2event(skb);
sctp_ulpevent_init(event, MSG_NOTIFICATION, skb->truesize);
@@ -168,7 +160,8 @@
/* Trim the buffer to the right length. */
skb_trim(skb, sizeof(struct sctp_assoc_change) +
- ntohs(chunk->chunk_hdr->length));
+ ntohs(chunk->chunk_hdr->length) -
+ sizeof(sctp_chunkhdr_t));
} else {
event = sctp_ulpevent_new(sizeof(struct sctp_assoc_change),
MSG_NOTIFICATION, gfp);
diff --git a/net/xfrm/xfrm_hash.c b/net/xfrm/xfrm_hash.c
index 37643bb..55ab579 100644
--- a/net/xfrm/xfrm_hash.c
+++ b/net/xfrm/xfrm_hash.c
@@ -22,7 +22,8 @@
n = __vmalloc(sz, GFP_KERNEL, PAGE_KERNEL);
else
n = (struct hlist_head *)
- __get_free_pages(GFP_KERNEL, get_order(sz));
+ __get_free_pages(GFP_KERNEL | __GFP_NOWARN,
+ get_order(sz));
if (n)
memset(n, 0, sz);
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 95271e8..d0882e5 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -796,6 +796,10 @@
struct hlist_head *chain;
struct hlist_node *entry;
+ *err = -ENOENT;
+ if (xfrm_policy_id2dir(id) != dir)
+ return NULL;
+
*err = 0;
write_lock_bh(&xfrm_policy_lock);
chain = xfrm_policy_byidx + idx_hash(id);
diff --git a/sound/Kconfig b/sound/Kconfig
index 97532bb..9ea4738 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -2,6 +2,7 @@
#
menu "Sound"
+ depends on HAS_IOMEM
config SOUND
tristate "Sound card support"
diff --git a/sound/aoa/codecs/snd-aoa-codec-onyx.c b/sound/aoa/codecs/snd-aoa-codec-onyx.c
index e91f9f6..ded5167 100644
--- a/sound/aoa/codecs/snd-aoa-codec-onyx.c
+++ b/sound/aoa/codecs/snd-aoa-codec-onyx.c
@@ -1018,7 +1018,7 @@
onyx->i2c.driver = &onyx_driver;
onyx->i2c.adapter = adapter;
onyx->i2c.addr = addr & 0x7f;
- strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE-1);
+ strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
if (i2c_attach_client(&onyx->i2c)) {
printk(KERN_ERR PFX "failed to attach to i2c\n");
@@ -1033,7 +1033,7 @@
goto fail;
}
- strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN-1);
+ strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN);
onyx->codec.owner = THIS_MODULE;
onyx->codec.init = onyx_init_codec;
onyx->codec.exit = onyx_exit_codec;
diff --git a/sound/aoa/codecs/snd-aoa-codec-tas.c b/sound/aoa/codecs/snd-aoa-codec-tas.c
index 041fe52..2f771f5 100644
--- a/sound/aoa/codecs/snd-aoa-codec-tas.c
+++ b/sound/aoa/codecs/snd-aoa-codec-tas.c
@@ -899,14 +899,14 @@
tas->i2c.addr = addr;
/* seems that half is a saner default */
tas->drc_range = TAS3004_DRC_MAX / 2;
- strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE-1);
+ strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
if (i2c_attach_client(&tas->i2c)) {
printk(KERN_ERR PFX "failed to attach to i2c\n");
goto fail;
}
- strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN-1);
+ strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
tas->codec.owner = THIS_MODULE;
tas->codec.init = tas_init_codec;
tas->codec.exit = tas_exit_codec;
diff --git a/sound/aoa/soundbus/core.c b/sound/aoa/soundbus/core.c
index 8b2e9b9..64d1639 100644
--- a/sound/aoa/soundbus/core.c
+++ b/sound/aoa/soundbus/core.c
@@ -163,8 +163,6 @@
#endif /* CONFIG_PM */
-extern struct device_attribute soundbus_dev_attrs[];
-
static struct bus_type soundbus_bus_type = {
.name = "aoa-soundbus",
.probe = soundbus_probe,
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-core.c b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
index 0fccdbf..efb9441 100644
--- a/sound/aoa/soundbus/i2sbus/i2sbus-core.c
+++ b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
@@ -23,9 +23,6 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
MODULE_DESCRIPTION("Apple Soundbus: I2S support");
-/* for auto-loading, declare that we handle this weird
- * string that macio puts into the relevant device */
-MODULE_ALIAS("of:Ni2sTi2sC");
static int force;
module_param(force, int, 0444);
@@ -37,6 +34,8 @@
{ }
};
+MODULE_DEVICE_TABLE(of, i2sbus_match);
+
static int alloc_dbdma_descriptor_ring(struct i2sbus_dev *i2sdev,
struct dbdma_command_mem *r,
int numcmds)
diff --git a/sound/aoa/soundbus/soundbus.h b/sound/aoa/soundbus/soundbus.h
index 5c27297..622cd37 100644
--- a/sound/aoa/soundbus/soundbus.h
+++ b/sound/aoa/soundbus/soundbus.h
@@ -199,4 +199,6 @@
extern int soundbus_register_driver(struct soundbus_driver *drv);
extern void soundbus_unregister_driver(struct soundbus_driver *drv);
+extern struct device_attribute soundbus_dev_attrs[];
+
#endif /* __SOUNDBUS_H */
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 9052348..a96733a 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -712,26 +712,23 @@
struct snd_pcm_substream *substream,
int state, int do_lock)
{
- struct list_head *pos;
struct snd_pcm_substream *s = NULL;
struct snd_pcm_substream *s1;
int res = 0;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (do_lock && s != substream)
- spin_lock(&s->self_group.lock);
+ spin_lock_nested(&s->self_group.lock,
+ SINGLE_DEPTH_NESTING);
res = ops->pre_action(s, state);
if (res < 0)
goto _unlock;
}
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
res = ops->do_action(s, state);
if (res < 0) {
if (ops->undo_action) {
- snd_pcm_group_for_each(pos, substream) {
- s1 = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s1, substream) {
if (s1 == s) /* failed stream */
break;
ops->undo_action(s1, state);
@@ -741,15 +738,13 @@
goto _unlock;
}
}
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
ops->post_action(s, state);
}
_unlock:
if (do_lock) {
/* unlock streams */
- snd_pcm_group_for_each(pos, substream) {
- s1 = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s1, substream) {
if (s1 != substream)
spin_unlock(&s1->self_group.lock);
if (s1 == s) /* end */
@@ -1438,7 +1433,7 @@
{
struct snd_card *card;
struct snd_pcm_runtime *runtime;
- struct list_head *pos;
+ struct snd_pcm_substream *s;
int result = 0;
int i, num_drecs;
struct drain_rec *drec, drec_tmp, *d;
@@ -1473,8 +1468,7 @@
/* count only playback streams */
num_drecs = 0;
- snd_pcm_group_for_each(pos, substream) {
- struct snd_pcm_substream *s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
runtime = s->runtime;
if (s->stream == SNDRV_PCM_STREAM_PLAYBACK) {
d = &drec[num_drecs++];
@@ -1674,7 +1668,7 @@
static int snd_pcm_unlink(struct snd_pcm_substream *substream)
{
- struct list_head *pos;
+ struct snd_pcm_substream *s;
int res = 0;
down_write(&snd_pcm_link_rwsem);
@@ -1686,8 +1680,8 @@
list_del(&substream->link_list);
substream->group->count--;
if (substream->group->count == 1) { /* detach the last stream, too */
- snd_pcm_group_for_each(pos, substream) {
- relink_to_local(snd_pcm_group_substream_entry(pos));
+ snd_pcm_group_for_each_entry(s, substream) {
+ relink_to_local(s);
break;
}
kfree(substream->group);
diff --git a/sound/core/rtctimer.c b/sound/core/rtctimer.c
index 9f7b32e..7cd5e8f 100644
--- a/sound/core/rtctimer.c
+++ b/sound/core/rtctimer.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
+#include <linux/log2.h>
#include <sound/core.h>
#include <sound/timer.h>
@@ -129,7 +130,7 @@
struct snd_timer *timer;
if (rtctimer_freq < 2 || rtctimer_freq > 8192 ||
- (rtctimer_freq & (rtctimer_freq - 1)) != 0) {
+ !is_power_of_2(rtctimer_freq)) {
snd_printk(KERN_ERR "rtctimer: invalid frequency %d\n",
rtctimer_freq);
return -EINVAL;
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 2de181a..1d563e5 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -42,6 +42,7 @@
#endif
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* MPU-401 port number */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* MPU-401 IRQ */
+static int uart_enter[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for MPU-401 device.");
@@ -57,6 +58,8 @@
MODULE_PARM_DESC(port, "Port # for MPU-401 device.");
module_param_array(irq, int, NULL, 0444);
MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device.");
+module_param_array(uart_enter, bool, NULL, 0444);
+MODULE_PARM_DESC(uart_enter, "Issue UART_ENTER command at open.");
static struct platform_device *platform_devices[SNDRV_CARDS];
static int pnp_registered;
@@ -80,10 +83,11 @@
strcat(card->longname, "polled");
}
- if ((err = snd_mpu401_uart_new(card, 0,
- MPU401_HW_MPU401,
- port[dev], 0,
- irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL)) < 0) {
+ err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev],
+ uart_enter[dev] ? 0 : MPU401_INFO_UART_ONLY,
+ irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0,
+ NULL);
+ if (err < 0) {
printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
goto _err;
}
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c
index 3daa9fa..85aedc3 100644
--- a/sound/drivers/mpu401/mpu401_uart.c
+++ b/sound/drivers/mpu401/mpu401_uart.c
@@ -266,6 +266,16 @@
return 0;
}
+static int snd_mpu401_do_reset(struct snd_mpu401 *mpu)
+{
+ if (snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1))
+ return -EIO;
+ if (!(mpu->info_flags & MPU401_INFO_UART_ONLY) &&
+ snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1))
+ return -EIO;
+ return 0;
+}
+
/*
* input/output open/close - protected by open_mutex in rawmidi.c
*/
@@ -278,9 +288,7 @@
if (mpu->open_input && (err = mpu->open_input(mpu)) < 0)
return err;
if (! test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode)) {
- if (snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1))
- goto error_out;
- if (snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1))
+ if (snd_mpu401_do_reset(mpu) < 0)
goto error_out;
}
mpu->substream_input = substream;
@@ -302,9 +310,7 @@
if (mpu->open_output && (err = mpu->open_output(mpu)) < 0)
return err;
if (! test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode)) {
- if (snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1))
- goto error_out;
- if (snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1))
+ if (snd_mpu401_do_reset(mpu) < 0)
goto error_out;
}
mpu->substream_output = substream;
diff --git a/sound/drivers/mts64.c b/sound/drivers/mts64.c
index 6c9f4c9..ebb1bda 100644
--- a/sound/drivers/mts64.c
+++ b/sound/drivers/mts64.c
@@ -892,13 +892,13 @@
struct platform_device *device;
device = platform_device_alloc(PLATFORM_DRIVER, device_count);
- if (!device)
+ if (!device)
return;
/* Temporary assignment to forward the parport */
platform_set_drvdata(device, p);
- if (platform_device_register(device) < 0) {
+ if (platform_device_add(device) < 0) {
platform_device_put(device);
return;
}
diff --git a/sound/drivers/portman2x4.c b/sound/drivers/portman2x4.c
index b2d0ba4..497cafb 100644
--- a/sound/drivers/portman2x4.c
+++ b/sound/drivers/portman2x4.c
@@ -676,13 +676,13 @@
struct platform_device *device;
device = platform_device_alloc(PLATFORM_DRIVER, device_count);
- if (!device)
+ if (!device)
return;
/* Temporary assignment to forward the parport */
platform_set_drvdata(device, p);
- if (platform_device_register(device) < 0) {
+ if (platform_device_add(device) < 0) {
platform_device_put(device);
return;
}
diff --git a/sound/drivers/vx/vx_hwdep.c b/sound/drivers/vx/vx_hwdep.c
index e1920af..9a8154c 100644
--- a/sound/drivers/vx/vx_hwdep.c
+++ b/sound/drivers/vx/vx_hwdep.c
@@ -30,6 +30,20 @@
#ifdef SND_VX_FW_LOADER
+MODULE_FIRMWARE("vx/bx_1_vxp.b56");
+MODULE_FIRMWARE("vx/bx_1_vp4.b56");
+MODULE_FIRMWARE("vx/x1_1_vx2.xlx");
+MODULE_FIRMWARE("vx/x1_2_v22.xlx");
+MODULE_FIRMWARE("vx/x1_1_vxp.xlx");
+MODULE_FIRMWARE("vx/x1_1_vp4.xlx");
+MODULE_FIRMWARE("vx/bd56002.boot");
+MODULE_FIRMWARE("vx/bd563v2.boot");
+MODULE_FIRMWARE("vx/bd563s3.boot");
+MODULE_FIRMWARE("vx/l_1_vx2.d56");
+MODULE_FIRMWARE("vx/l_1_v22.d56");
+MODULE_FIRMWARE("vx/l_1_vxp.d56");
+MODULE_FIRMWARE("vx/l_1_vp4.d56");
+
int snd_vx_setup_firmware(struct vx_core *chip)
{
static char *fw_files[VX_TYPE_NUMS][4] = {
diff --git a/sound/i2c/other/ak4114.c b/sound/i2c/other/ak4114.c
index adbfd58..1efb973 100644
--- a/sound/i2c/other/ak4114.c
+++ b/sound/i2c/other/ak4114.c
@@ -36,6 +36,7 @@
#define AK4114_ADDR 0x00 /* fixed address */
static void ak4114_stats(struct work_struct *work);
+static void ak4114_init_regs(struct ak4114 *chip);
static void reg_write(struct ak4114 *ak4114, unsigned char reg, unsigned char val)
{
@@ -105,7 +106,7 @@
for (reg = 0; reg < 5; reg++)
chip->txcsb[reg] = txcsb[reg];
- snd_ak4114_reinit(chip);
+ ak4114_init_regs(chip);
chip->rcs0 = reg_read(chip, AK4114_REG_RCS0) & ~(AK4114_QINT | AK4114_CINT);
chip->rcs1 = reg_read(chip, AK4114_REG_RCS1);
@@ -131,13 +132,10 @@
(chip->txcsb[reg-AK4114_REG_TXCSB0] & ~mask) | val);
}
-void snd_ak4114_reinit(struct ak4114 *chip)
+static void ak4114_init_regs(struct ak4114 *chip)
{
unsigned char old = chip->regmap[AK4114_REG_PWRDN], reg;
- chip->init = 1;
- mb();
- flush_scheduled_work();
/* bring the chip to reset state and powerdown state */
reg_write(chip, AK4114_REG_PWRDN, old & ~(AK4114_RST|AK4114_PWN));
udelay(200);
@@ -150,9 +148,18 @@
reg_write(chip, reg + AK4114_REG_TXCSB0, chip->txcsb[reg]);
/* release powerdown, everything is initialized now */
reg_write(chip, AK4114_REG_PWRDN, old | AK4114_RST | AK4114_PWN);
+}
+
+void snd_ak4114_reinit(struct ak4114 *chip)
+{
+ chip->init = 1;
+ mb();
+ flush_scheduled_work();
+ ak4114_init_regs(chip);
/* bring up statistics / event queing */
chip->init = 0;
- schedule_delayed_work(&chip->work, HZ / 10);
+ if (chip->kctls[0])
+ schedule_delayed_work(&chip->work, HZ / 10);
}
static unsigned int external_rate(unsigned char rcs1)
@@ -428,7 +435,7 @@
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4114_in_bit_info,
.get = snd_ak4114_in_bit_get,
- .private_value = (6<<8) | AK4114_REG_RCS1,
+ .private_value = (6<<8) | AK4114_REG_RCS0,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
@@ -436,7 +443,15 @@
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4114_in_bit_info,
.get = snd_ak4114_in_bit_get,
- .private_value = (3<<8) | AK4114_REG_RCS1,
+ .private_value = (3<<8) | AK4114_REG_RCS0,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "IEC958 PPL Lock Status",
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .info = snd_ak4114_in_bit_info,
+ .get = snd_ak4114_in_bit_get,
+ .private_value = (1<<31) | (4<<8) | AK4114_REG_RCS0,
}
};
@@ -455,7 +470,7 @@
kctl = snd_ctl_new1(&snd_ak4114_iec958_controls[idx], ak4114);
if (kctl == NULL)
return -ENOMEM;
- if (!strstr(kctl->id.name, "Playback")) {
+ if (strstr(kctl->id.name, "Playback")) {
if (ply_substream == NULL) {
snd_ctl_free_one(kctl);
ak4114->kctls[idx] = NULL;
@@ -472,9 +487,58 @@
return err;
ak4114->kctls[idx] = kctl;
}
+ /* trigger workq */
+ schedule_delayed_work(&ak4114->work, HZ / 10);
return 0;
}
+/* notify kcontrols if any parameters are changed */
+static void ak4114_notify(struct ak4114 *ak4114,
+ unsigned char rcs0, unsigned char rcs1,
+ unsigned char c0, unsigned char c1)
+{
+ if (!ak4114->kctls[0])
+ return;
+
+ if (rcs0 & AK4114_PAR)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[0]->id);
+ if (rcs0 & AK4114_V)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[1]->id);
+ if (rcs1 & AK4114_CCRC)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[2]->id);
+ if (rcs1 & AK4114_QCRC)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[3]->id);
+
+ /* rate change */
+ if (c1 & 0xf0)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[4]->id);
+
+ if ((c0 & AK4114_PEM) | (c0 & AK4114_CINT))
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[9]->id);
+ if (c0 & AK4114_QINT)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[10]->id);
+
+ if (c0 & AK4114_AUDION)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[11]->id);
+ if (c0 & AK4114_AUTO)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[12]->id);
+ if (c0 & AK4114_DTSCD)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[13]->id);
+ if (c0 & AK4114_UNLCK)
+ snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &ak4114->kctls[14]->id);
+}
+
int snd_ak4114_external_rate(struct ak4114 *ak4114)
{
unsigned char rcs1;
@@ -511,31 +575,7 @@
ak4114->rcs1 = rcs1;
spin_unlock_irqrestore(&ak4114->lock, _flags);
- if (rcs0 & AK4114_PAR)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[0]->id);
- if (rcs0 & AK4114_V)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[1]->id);
- if (rcs1 & AK4114_CCRC)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[2]->id);
- if (rcs1 & AK4114_QCRC)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[3]->id);
-
- /* rate change */
- if (c1 & 0xf0)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[4]->id);
-
- if ((c0 & AK4114_PEM) | (c0 & AK4114_CINT))
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[9]->id);
- if (c0 & AK4114_QINT)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[10]->id);
-
- if (c0 & AK4114_AUDION)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[11]->id);
- if (c0 & AK4114_AUTO)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[12]->id);
- if (c0 & AK4114_DTSCD)
- snd_ctl_notify(ak4114->card, SNDRV_CTL_EVENT_MASK_VALUE, &ak4114->kctls[13]->id);
-
+ ak4114_notify(ak4114, rcs0, rcs1, c0, c1);
if (ak4114->change_callback && (c0 | c1) != 0)
ak4114->change_callback(ak4114, c0, c1);
@@ -558,9 +598,9 @@
{
struct ak4114 *chip = container_of(work, struct ak4114, work.work);
- if (chip->init)
- return;
- snd_ak4114_check_rate_and_errors(chip, 0);
+ if (!chip->init)
+ snd_ak4114_check_rate_and_errors(chip, 0);
+
schedule_delayed_work(&chip->work, HZ / 10);
}
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 4e3a972..cf3803c 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -358,12 +358,21 @@
config SND_SB16_CSP
bool "Sound Blaster 16/AWE CSP support"
depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC)
- select FW_LOADER
+ select FW_LOADER if !SND_SB16_CSP_FIRMWARE_IN_KERNEL
help
Say Y here to include support for the CSP core. This special
coprocessor can do variable tasks like various compression and
decompression algorithms.
+config SND_SB16_CSP_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for SB16 CSP"
+ depends on SND_SB16_CSP
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the SB16 CSP controller. If you choose N here, you need
+ to install the firmware files from the alsa-firmware package.
+
config SND_SGALAXY
tristate "Aztech Sound Galaxy"
depends on SND
@@ -391,7 +400,7 @@
config SND_WAVEFRONT
tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
depends on SND
- select FW_LOADER
+ select FW_LOADER if !SND_WAVEFRONT_FIRMWARE_IN_KERNEL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_CS4231_LIB
@@ -402,4 +411,13 @@
To compile this driver as a module, choose M here: the module
will be called snd-wavefront.
+config SND_WAVEFRONT_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Wavefront"
+ depends on SND_WAVEFRONT
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Wavefront driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
endmenu
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index 5903450..fc88a31 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -129,8 +129,8 @@
}
acard->devmpu = pnp_request_card_device(card, id->devs[1].id, NULL);
if (acard->devmpu == NULL) {
- kfree(cfg);
- return -EBUSY;
+ mpu_port[dev] = -1;
+ snd_printk(KERN_WARNING PFX "MPU401 device busy, skipping.\n");
}
pdev = acard->dev;
@@ -162,6 +162,10 @@
dma2[dev] = pnp_dma(pdev, 1);
irq[dev] = pnp_irq(pdev, 0);
+ if (acard->devmpu == NULL) {
+ kfree(cfg);
+ return 0;
+ }
pdev = acard->devmpu;
pnp_init_resource_table(cfg);
diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c
index 74e501d..d09a7fa 100644
--- a/sound/isa/ad1848/ad1848.c
+++ b/sound/isa/ad1848/ad1848.c
@@ -24,7 +24,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/moduleparam.h>
@@ -32,8 +32,11 @@
#include <sound/ad1848.h>
#include <sound/initval.h>
+#define CRD_NAME "Generic AD1848/AD1847/CS4248"
+#define DEV_NAME "ad1848"
+
+MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Tugrul Galatali <galatalt@stuy.edu>, Jaroslav Kysela <perex@suse.cz>");
-MODULE_DESCRIPTION("AD1848/AD1847/CS4248");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Analog Devices,AD1848},"
"{Analog Devices,AD1847},"
@@ -48,95 +51,98 @@
static int thinkpad[SNDRV_CARDS]; /* Thinkpad special case */
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for AD1848 soundcard.");
+MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for AD1848 soundcard.");
+MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable AD1848 soundcard.");
+MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
module_param_array(port, long, NULL, 0444);
-MODULE_PARM_DESC(port, "Port # for AD1848 driver.");
+MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
module_param_array(irq, int, NULL, 0444);
-MODULE_PARM_DESC(irq, "IRQ # for AD1848 driver.");
+MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
module_param_array(dma1, int, NULL, 0444);
-MODULE_PARM_DESC(dma1, "DMA1 # for AD1848 driver.");
+MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver.");
module_param_array(thinkpad, bool, NULL, 0444);
MODULE_PARM_DESC(thinkpad, "Enable only for the onboard CS4248 of IBM Thinkpad 360/750/755 series.");
-static struct platform_device *devices[SNDRV_CARDS];
-
-
-static int __devinit snd_ad1848_probe(struct platform_device *pdev)
+static int __devinit snd_ad1848_match(struct device *dev, unsigned int n)
{
- int dev = pdev->id;
+ if (!enable[n])
+ return 0;
+
+ if (port[n] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id);
+ return 0;
+ }
+ if (irq[n] == SNDRV_AUTO_IRQ) {
+ snd_printk(KERN_ERR "%s: please specify irq\n", dev->bus_id);
+ return 0;
+ }
+ if (dma1[n] == SNDRV_AUTO_DMA) {
+ snd_printk(KERN_ERR "%s: please specify dma1\n", dev->bus_id);
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_ad1848_probe(struct device *dev, unsigned int n)
+{
struct snd_card *card;
struct snd_ad1848 *chip;
struct snd_pcm *pcm;
- int err;
+ int error;
- if (port[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "ad1848: specify port\n");
+ card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
+ if (!card)
return -EINVAL;
- }
- if (irq[dev] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "ad1848: specify irq\n");
- return -EINVAL;
- }
- if (dma1[dev] == SNDRV_AUTO_DMA) {
- snd_printk(KERN_ERR "ad1848: specify dma1\n");
- return -EINVAL;
- }
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
+ error = snd_ad1848_create(card, port[n], irq[n], dma1[n],
+ thinkpad[n] ? AD1848_HW_THINKPAD : AD1848_HW_DETECT, &chip);
+ if (error < 0)
+ goto out;
- if ((err = snd_ad1848_create(card, port[dev],
- irq[dev],
- dma1[dev],
- thinkpad[dev] ? AD1848_HW_THINKPAD : AD1848_HW_DETECT,
- &chip)) < 0)
- goto _err;
card->private_data = chip;
- if ((err = snd_ad1848_pcm(chip, 0, &pcm)) < 0)
- goto _err;
+ error = snd_ad1848_pcm(chip, 0, &pcm);
+ if (error < 0)
+ goto out;
- if ((err = snd_ad1848_mixer(chip)) < 0)
- goto _err;
+ error = snd_ad1848_mixer(chip);
+ if (error < 0)
+ goto out;
strcpy(card->driver, "AD1848");
strcpy(card->shortname, pcm->name);
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
- pcm->name, chip->port, irq[dev], dma1[dev]);
-
- if (thinkpad[dev])
+ pcm->name, chip->port, irq[n], dma1[n]);
+ if (thinkpad[n])
strcat(card->longname, " [Thinkpad]");
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, dev);
- if ((err = snd_card_register(card)) < 0)
- goto _err;
+ error = snd_card_register(card);
+ if (error < 0)
+ goto out;
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(dev, card);
return 0;
- _err:
- snd_card_free(card);
- return err;
+out: snd_card_free(card);
+ return error;
}
-static int __devexit snd_ad1848_remove(struct platform_device *devptr)
+static int __devexit snd_ad1848_remove(struct device *dev, unsigned int n)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_ad1848_suspend(struct platform_device *pdev, pm_message_t state)
+static int snd_ad1848_suspend(struct device *dev, unsigned int n, pm_message_t state)
{
- struct snd_card *card = platform_get_drvdata(pdev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_ad1848 *chip = card->private_data;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
@@ -144,9 +150,9 @@
return 0;
}
-static int snd_ad1848_resume(struct platform_device *pdev)
+static int snd_ad1848_resume(struct device *dev, unsigned int n)
{
- struct snd_card *card = platform_get_drvdata(pdev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_ad1848 *chip = card->private_data;
chip->resume(chip);
@@ -155,9 +161,8 @@
}
#endif
-#define SND_AD1848_DRIVER "snd_ad1848"
-
-static struct platform_driver snd_ad1848_driver = {
+static struct isa_driver snd_ad1848_driver = {
+ .match = snd_ad1848_match,
.probe = snd_ad1848_probe,
.remove = __devexit_p(snd_ad1848_remove),
#ifdef CONFIG_PM
@@ -165,57 +170,19 @@
.resume = snd_ad1848_resume,
#endif
.driver = {
- .name = SND_AD1848_DRIVER
- },
+ .name = DEV_NAME
+ }
};
-static void __init_or_module snd_ad1848_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_ad1848_driver);
-}
-
static int __init alsa_card_ad1848_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_ad1848_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(SND_AD1848_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "AD1848 soundcard not found or device busy\n");
-#endif
- snd_ad1848_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_ad1848_driver, SNDRV_CARDS);
}
static void __exit alsa_card_ad1848_exit(void)
{
- snd_ad1848_unregister_all();
+ isa_unregister_driver(&snd_ad1848_driver);
}
-module_init(alsa_card_ad1848_init)
-module_exit(alsa_card_ad1848_exit)
+module_init(alsa_card_ad1848_init);
+module_exit(alsa_card_ad1848_exit);
diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c
index 1124344..d687207 100644
--- a/sound/isa/adlib.c
+++ b/sound/isa/adlib.c
@@ -5,13 +5,13 @@
#include <sound/driver.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/opl3.h>
#define CRD_NAME "AdLib FM"
-#define DRV_NAME "snd_adlib"
+#define DEV_NAME "adlib"
MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Rene Herman");
@@ -31,133 +31,99 @@
module_param_array(port, long, NULL, 0444);
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
-static struct platform_device *devices[SNDRV_CARDS];
+static int __devinit snd_adlib_match(struct device *dev, unsigned int n)
+{
+ if (!enable[n])
+ return 0;
+
+ if (port[n] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id);
+ return 0;
+ }
+ return 1;
+}
static void snd_adlib_free(struct snd_card *card)
{
release_and_free_resource(card->private_data);
}
-static int __devinit snd_adlib_probe(struct platform_device *device)
+static int __devinit snd_adlib_probe(struct device *dev, unsigned int n)
{
struct snd_card *card;
struct snd_opl3 *opl3;
+ int error;
- int error, i = device->id;
-
- if (port[i] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR DRV_NAME ": please specify port\n");
- error = -EINVAL;
- goto out0;
- }
-
- card = snd_card_new(index[i], id[i], THIS_MODULE, 0);
+ card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
if (!card) {
- snd_printk(KERN_ERR DRV_NAME ": could not create card\n");
- error = -EINVAL;
- goto out0;
+ snd_printk(KERN_ERR "%s: could not create card\n", dev->bus_id);
+ return -EINVAL;
}
- card->private_data = request_region(port[i], 4, CRD_NAME);
+ card->private_data = request_region(port[n], 4, CRD_NAME);
if (!card->private_data) {
- snd_printk(KERN_ERR DRV_NAME ": could not grab ports\n");
+ snd_printk(KERN_ERR "%s: could not grab ports\n", dev->bus_id);
error = -EBUSY;
- goto out1;
+ goto out;
}
card->private_free = snd_adlib_free;
- error = snd_opl3_create(card, port[i], port[i] + 2, OPL3_HW_AUTO, 1, &opl3);
+ strcpy(card->driver, DEV_NAME);
+ strcpy(card->shortname, CRD_NAME);
+ sprintf(card->longname, CRD_NAME " at %#lx", port[n]);
+
+ error = snd_opl3_create(card, port[n], port[n] + 2, OPL3_HW_AUTO, 1, &opl3);
if (error < 0) {
- snd_printk(KERN_ERR DRV_NAME ": could not create OPL\n");
- goto out1;
+ snd_printk(KERN_ERR "%s: could not create OPL\n", dev->bus_id);
+ goto out;
}
error = snd_opl3_hwdep_new(opl3, 0, 0, NULL);
if (error < 0) {
- snd_printk(KERN_ERR DRV_NAME ": could not create FM\n");
- goto out1;
+ snd_printk(KERN_ERR "%s: could not create FM\n", dev->bus_id);
+ goto out;
}
- strcpy(card->driver, DRV_NAME);
- strcpy(card->shortname, CRD_NAME);
- sprintf(card->longname, CRD_NAME " at %#lx", port[i]);
-
- snd_card_set_dev(card, &device->dev);
+ snd_card_set_dev(card, dev);
error = snd_card_register(card);
if (error < 0) {
- snd_printk(KERN_ERR DRV_NAME ": could not register card\n");
- goto out1;
+ snd_printk(KERN_ERR "%s: could not register card\n", dev->bus_id);
+ goto out;
}
- platform_set_drvdata(device, card);
+ dev_set_drvdata(dev, card);
return 0;
-out1: snd_card_free(card);
-out0: return error;
+out: snd_card_free(card);
+ return error;
}
-static int __devexit snd_adlib_remove(struct platform_device *device)
+static int __devexit snd_adlib_remove(struct device *dev, unsigned int n)
{
- snd_card_free(platform_get_drvdata(device));
- platform_set_drvdata(device, NULL);
+ snd_card_free(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
return 0;
}
-static struct platform_driver snd_adlib_driver = {
+static struct isa_driver snd_adlib_driver = {
+ .match = snd_adlib_match,
.probe = snd_adlib_probe,
.remove = __devexit_p(snd_adlib_remove),
.driver = {
- .name = DRV_NAME
+ .name = DEV_NAME
}
};
static int __init alsa_card_adlib_init(void)
{
- int i, cards;
-
- if (platform_driver_register(&snd_adlib_driver) < 0) {
- snd_printk(KERN_ERR DRV_NAME ": could not register driver\n");
- return -ENODEV;
- }
-
- for (cards = 0, i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
-
- if (!enable[i])
- continue;
-
- device = platform_device_register_simple(DRV_NAME, i, NULL, 0);
- if (IS_ERR(device))
- continue;
-
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
-
- devices[i] = device;
- cards++;
- }
-
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR CRD_NAME " soundcard not found or device busy\n");
-#endif
- platform_driver_unregister(&snd_adlib_driver);
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_adlib_driver, SNDRV_CARDS);
}
static void __exit alsa_card_adlib_exit(void)
{
- int i;
-
- for (i = 0; i < SNDRV_CARDS; i++)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_adlib_driver);
+ isa_unregister_driver(&snd_adlib_driver);
}
module_init(alsa_card_adlib_init);
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index c09a800..214d65d 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -46,7 +46,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
@@ -108,7 +108,6 @@
module_param_array(wssdma, int, NULL, 0444);
MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver.");
-static struct platform_device *platform_devices[SNDRV_CARDS];
#ifdef CONFIG_PNP
static int pnp_registered;
#endif
@@ -547,70 +546,78 @@
return snd_card_register(card);
}
-static int __devinit snd_cmi8330_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_cmi8330_isa_match(struct device *pdev,
+ unsigned int dev)
{
- struct snd_card *card;
- int err;
- int dev = pdev->id;
-
+ if (!enable[dev] || is_isapnp_selected(dev))
+ return 0;
if (wssport[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR PFX "specify wssport\n");
- return -EINVAL;
+ return 0;
}
if (sbport[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR PFX "specify sbport\n");
- return -EINVAL;
+ return 0;
}
+ return 1;
+}
+
+static int __devinit snd_cmi8330_isa_probe(struct device *pdev,
+ unsigned int dev)
+{
+ struct snd_card *card;
+ int err;
card = snd_cmi8330_card_new(dev);
if (! card)
return -ENOMEM;
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_cmi8330_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
}
-static int __devexit snd_cmi8330_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_cmi8330_isa_remove(struct device *devptr,
+ unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_cmi8330_nonpnp_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_cmi8330_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
{
- return snd_cmi8330_suspend(platform_get_drvdata(dev));
+ return snd_cmi8330_suspend(dev_get_drvdata(dev));
}
-static int snd_cmi8330_nonpnp_resume(struct platform_device *dev)
+static int snd_cmi8330_isa_resume(struct device *dev, unsigned int n)
{
- return snd_cmi8330_resume(platform_get_drvdata(dev));
+ return snd_cmi8330_resume(dev_get_drvdata(dev));
}
#endif
-#define CMI8330_DRIVER "snd_cmi8330"
+#define DEV_NAME "cmi8330"
-static struct platform_driver snd_cmi8330_driver = {
- .probe = snd_cmi8330_nonpnp_probe,
- .remove = __devexit_p(snd_cmi8330_nonpnp_remove),
+static struct isa_driver snd_cmi8330_driver = {
+ .match = snd_cmi8330_isa_match,
+ .probe = snd_cmi8330_isa_probe,
+ .remove = __devexit_p(snd_cmi8330_isa_remove),
#ifdef CONFIG_PM
- .suspend = snd_cmi8330_nonpnp_suspend,
- .resume = snd_cmi8330_nonpnp_resume,
+ .suspend = snd_cmi8330_isa_suspend,
+ .resume = snd_cmi8330_isa_resume,
#endif
.driver = {
- .name = CMI8330_DRIVER
+ .name = DEV_NAME
},
};
#ifdef CONFIG_PNP
-static unsigned int __devinitdata cmi8330_pnp_devices;
-
static int __devinit snd_cmi8330_pnp_detect(struct pnp_card_link *pcard,
const struct pnp_card_device_id *pid)
{
@@ -640,7 +647,6 @@
}
pnp_set_card_drvdata(pcard, card);
dev++;
- cmi8330_pnp_devices++;
return 0;
}
@@ -675,63 +681,28 @@
};
#endif /* CONFIG_PNP */
-static void __init_or_module snd_cmi8330_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnp_registered)
- pnp_unregister_card_driver(&cmi8330_pnpc_driver);
-#endif
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_cmi8330_driver);
-}
-
static int __init alsa_card_cmi8330_init(void)
{
- int i, err, cards = 0;
+ int err;
- if ((err = platform_driver_register(&snd_cmi8330_driver)) < 0)
+ err = isa_register_driver(&snd_cmi8330_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
-
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i] || is_isapnp_selected(i))
- continue;
- device = platform_device_register_simple(CMI8330_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- cards++;
- }
-
#ifdef CONFIG_PNP
err = pnp_register_card_driver(&cmi8330_pnpc_driver);
- if (!err) {
+ if (!err)
pnp_registered = 1;
- cards += cmi8330_pnp_devices;
- }
#endif
-
- if (!cards) {
-#ifdef MODULE
- snd_printk(KERN_ERR "CMI8330 not found or device busy\n");
-#endif
- snd_cmi8330_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_cmi8330_exit(void)
{
- snd_cmi8330_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_card_driver(&cmi8330_pnpc_driver);
+#endif
+ isa_unregister_driver(&snd_cmi8330_driver);
}
module_init(alsa_card_cmi8330_init)
diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c
index 696a5c8..ac40411 100644
--- a/sound/isa/cs423x/cs4231.c
+++ b/sound/isa/cs423x/cs4231.c
@@ -23,7 +23,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/moduleparam.h>
@@ -32,8 +32,11 @@
#include <sound/mpu401.h>
#include <sound/initval.h>
+#define CRD_NAME "Generic CS4231"
+#define DEV_NAME "cs4231"
+
+MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>");
-MODULE_DESCRIPTION("Generic CS4231");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Crystal Semiconductors,CS4231}}");
@@ -48,132 +51,136 @@
static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0,1,3,5,6,7 */
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for CS4231 soundcard.");
+MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for CS4231 soundcard.");
+MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable CS4231 soundcard.");
+MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
module_param_array(port, long, NULL, 0444);
-MODULE_PARM_DESC(port, "Port # for CS4231 driver.");
+MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
module_param_array(mpu_port, long, NULL, 0444);
-MODULE_PARM_DESC(mpu_port, "MPU-401 port # for CS4231 driver.");
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
module_param_array(irq, int, NULL, 0444);
-MODULE_PARM_DESC(irq, "IRQ # for CS4231 driver.");
+MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
module_param_array(mpu_irq, int, NULL, 0444);
-MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for CS4231 driver.");
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
module_param_array(dma1, int, NULL, 0444);
-MODULE_PARM_DESC(dma1, "DMA1 # for CS4231 driver.");
+MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver.");
module_param_array(dma2, int, NULL, 0444);
-MODULE_PARM_DESC(dma2, "DMA2 # for CS4231 driver.");
+MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver.");
-static struct platform_device *devices[SNDRV_CARDS];
-
-
-static int __init snd_cs4231_probe(struct platform_device *pdev)
+static int __devinit snd_cs4231_match(struct device *dev, unsigned int n)
{
- int dev = pdev->id;
- struct snd_card *card;
- struct snd_pcm *pcm;
- struct snd_cs4231 *chip;
- int err;
+ if (!enable[n])
+ return 0;
- if (port[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "specify port\n");
- return -EINVAL;
+ if (port[n] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR "%s: please specify port\n", dev->bus_id);
+ return 0;
}
- if (irq[dev] == SNDRV_AUTO_IRQ) {
- snd_printk(KERN_ERR "specify irq\n");
- return -EINVAL;
+ if (irq[n] == SNDRV_AUTO_IRQ) {
+ snd_printk(KERN_ERR "%s: please specify irq\n", dev->bus_id);
+ return 0;
}
- if (dma1[dev] == SNDRV_AUTO_DMA) {
- snd_printk(KERN_ERR "specify dma1\n");
- return -EINVAL;
+ if (dma1[n] == SNDRV_AUTO_DMA) {
+ snd_printk(KERN_ERR "%s: please specify dma1\n", dev->bus_id);
+ return 0;
}
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
- if ((err = snd_cs4231_create(card, port[dev], -1,
- irq[dev],
- dma1[dev],
- dma2[dev],
- CS4231_HW_DETECT,
- 0, &chip)) < 0)
- goto _err;
+ return 1;
+}
+
+static int __devinit snd_cs4231_probe(struct device *dev, unsigned int n)
+{
+ struct snd_card *card;
+ struct snd_cs4231 *chip;
+ struct snd_pcm *pcm;
+ int error;
+
+ card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
+ if (!card)
+ return -EINVAL;
+
+ error = snd_cs4231_create(card, port[n], -1, irq[n], dma1[n], dma2[n],
+ CS4231_HW_DETECT, 0, &chip);
+ if (error < 0)
+ goto out;
+
card->private_data = chip;
- if ((err = snd_cs4231_pcm(chip, 0, &pcm)) < 0)
- goto _err;
+ error = snd_cs4231_pcm(chip, 0, &pcm);
+ if (error < 0)
+ goto out;
strcpy(card->driver, "CS4231");
strcpy(card->shortname, pcm->name);
+
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
- pcm->name, chip->port, irq[dev], dma1[dev]);
- if (dma2[dev] >= 0)
- sprintf(card->longname + strlen(card->longname), "&%d", dma2[dev]);
+ pcm->name, chip->port, irq[n], dma1[n]);
+ if (dma2[n] >= 0)
+ sprintf(card->longname + strlen(card->longname), "&%d", dma2[n]);
- if ((err = snd_cs4231_mixer(chip)) < 0)
- goto _err;
- if ((err = snd_cs4231_timer(chip, 0, NULL)) < 0)
- goto _err;
+ error = snd_cs4231_mixer(chip);
+ if (error < 0)
+ goto out;
- if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
- if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
- mpu_irq[dev] = -1;
+ error = snd_cs4231_timer(chip, 0, NULL);
+ if (error < 0)
+ goto out;
+
+ if (mpu_port[n] > 0 && mpu_port[n] != SNDRV_AUTO_PORT) {
+ if (mpu_irq[n] == SNDRV_AUTO_IRQ)
+ mpu_irq[n] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
- mpu_port[dev], 0,
- mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
+ mpu_port[n], 0, mpu_irq[n],
+ mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
- printk(KERN_WARNING "cs4231: MPU401 not detected\n");
+ printk(KERN_WARNING "%s: MPU401 not detected\n", dev->bus_id);
}
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, dev);
- if ((err = snd_card_register(card)) < 0)
- goto _err;
+ error = snd_card_register(card);
+ if (error < 0)
+ goto out;
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(dev, card);
return 0;
- _err:
- snd_card_free(card);
- return err;
+out: snd_card_free(card);
+ return error;
}
-static int __devexit snd_cs4231_remove(struct platform_device *devptr)
+static int __devexit snd_cs4231_remove(struct device *dev, unsigned int n)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_cs4231_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_cs4231_suspend(struct device *dev, unsigned int n, pm_message_t state)
{
- struct snd_card *card;
- struct snd_cs4231 *chip;
- card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
+ struct snd_cs4231 *chip = card->private_data;
+
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- chip = card->private_data;
chip->suspend(chip);
return 0;
}
-static int snd_cs4231_resume(struct platform_device *dev)
+static int snd_cs4231_resume(struct device *dev, unsigned int n)
{
- struct snd_card *card;
- struct snd_cs4231 *chip;
- card = platform_get_drvdata(dev);
- chip = card->private_data;
+ struct snd_card *card = dev_get_drvdata(dev);
+ struct snd_cs4231 *chip = card->private_data;
+
chip->resume(chip);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
#endif
-#define SND_CS4231_DRIVER "snd_cs4231"
-
-static struct platform_driver snd_cs4231_driver = {
+static struct isa_driver snd_cs4231_driver = {
+ .match = snd_cs4231_match,
.probe = snd_cs4231_probe,
.remove = __devexit_p(snd_cs4231_remove),
#ifdef CONFIG_PM
@@ -181,57 +188,19 @@
.resume = snd_cs4231_resume,
#endif
.driver = {
- .name = SND_CS4231_DRIVER
- },
+ .name = DEV_NAME
+ }
};
-static void __init_or_module snd_cs4231_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_cs4231_driver);
-}
-
static int __init alsa_card_cs4231_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_cs4231_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(SND_CS4231_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "CS4231 soundcard not found or device busy\n");
-#endif
- snd_cs4231_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_cs4231_driver, SNDRV_CARDS);
}
static void __exit alsa_card_cs4231_exit(void)
{
- snd_cs4231_unregister_all();
+ isa_unregister_driver(&snd_cs4231_driver);
}
-module_init(alsa_card_cs4231_init)
-module_exit(alsa_card_cs4231_exit)
+module_init(alsa_card_cs4231_init);
+module_exit(alsa_card_cs4231_exit);
diff --git a/sound/isa/cs423x/cs4231_lib.c b/sound/isa/cs423x/cs4231_lib.c
index 75c7c5f..914d77b 100644
--- a/sound/isa/cs423x/cs4231_lib.c
+++ b/sound/isa/cs423x/cs4231_lib.c
@@ -405,7 +405,6 @@
struct snd_cs4231 *chip = snd_pcm_substream_chip(substream);
int result = 0;
unsigned int what;
- struct list_head *pos;
struct snd_pcm_substream *s;
int do_start;
@@ -425,8 +424,7 @@
}
what = 0;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == chip->playback_substream) {
what |= CS4231_PLAYBACK_ENABLE;
snd_pcm_trigger_done(s, substream);
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index 07ffd5c..87f1392 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
@@ -75,10 +75,10 @@
#ifdef CS4232
#define IDENT "CS4232"
-#define CS423X_DRIVER "snd_cs4232"
+#define DEV_NAME "cs4232"
#else
#define IDENT "CS4236+"
-#define CS423X_DRIVER "snd_cs4236"
+#define DEV_NAME "cs4236"
#endif
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
@@ -126,14 +126,12 @@
module_param_array(dma2, int, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver.");
-static struct platform_device *platform_devices[SNDRV_CARDS];
#ifdef CONFIG_PNP
static int pnpc_registered;
#ifdef CS4232
static int pnp_registered;
#endif
#endif /* CONFIG_PNP */
-static unsigned int snd_cs423x_devices;
struct snd_card_cs4236 {
struct snd_cs4231 *chip;
@@ -542,38 +540,55 @@
return snd_card_register(card);
}
-static int __init snd_cs423x_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_cs423x_isa_match(struct device *pdev,
+ unsigned int dev)
{
- int dev = pdev->id;
- struct snd_card *card;
- int err;
+ if (!enable[dev] || is_isapnp_selected(dev))
+ return 0;
if (port[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "specify port\n");
- return -EINVAL;
+ snd_printk(KERN_ERR "%s: please specify port\n", pdev->bus_id);
+ return 0;
}
if (cport[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR "specify cport\n");
- return -EINVAL;
+ snd_printk(KERN_ERR "%s: please specify cport\n", pdev->bus_id);
+ return 0;
}
+ if (irq[dev] == SNDRV_AUTO_IRQ) {
+ snd_printk(KERN_ERR "%s: please specify irq\n", pdev->bus_id);
+ return 0;
+ }
+ if (dma1[dev] == SNDRV_AUTO_DMA) {
+ snd_printk(KERN_ERR "%s: please specify dma1\n", pdev->bus_id);
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_cs423x_isa_probe(struct device *pdev,
+ unsigned int dev)
+{
+ struct snd_card *card;
+ int err;
card = snd_cs423x_card_new(dev);
if (! card)
return -ENOMEM;
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_cs423x_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
}
-static int __devexit snd_cs423x_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_cs423x_isa_remove(struct device *pdev,
+ unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(pdev));
+ dev_set_drvdata(pdev, NULL);
return 0;
}
@@ -594,26 +609,28 @@
return 0;
}
-static int snd_cs423x_nonpnp_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_cs423x_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
{
- return snd_cs423x_suspend(platform_get_drvdata(dev));
+ return snd_cs423x_suspend(dev_get_drvdata(dev));
}
-static int snd_cs423x_nonpnp_resume(struct platform_device *dev)
+static int snd_cs423x_isa_resume(struct device *dev, unsigned int n)
{
- return snd_cs423x_resume(platform_get_drvdata(dev));
+ return snd_cs423x_resume(dev_get_drvdata(dev));
}
#endif
-static struct platform_driver cs423x_nonpnp_driver = {
- .probe = snd_cs423x_nonpnp_probe,
- .remove = __devexit_p(snd_cs423x_nonpnp_remove),
+static struct isa_driver cs423x_isa_driver = {
+ .match = snd_cs423x_isa_match,
+ .probe = snd_cs423x_isa_probe,
+ .remove = __devexit_p(snd_cs423x_isa_remove),
#ifdef CONFIG_PM
- .suspend = snd_cs423x_nonpnp_suspend,
- .resume = snd_cs423x_nonpnp_resume,
+ .suspend = snd_cs423x_isa_suspend,
+ .resume = snd_cs423x_isa_resume,
#endif
.driver = {
- .name = CS423X_DRIVER
+ .name = DEV_NAME
},
};
@@ -651,7 +668,6 @@
}
pnp_set_drvdata(pdev, card);
dev++;
- snd_cs423x_devices++;
return 0;
}
@@ -715,7 +731,6 @@
}
pnp_set_card_drvdata(pcard, card);
dev++;
- snd_cs423x_devices++;
return 0;
}
@@ -750,45 +765,13 @@
};
#endif /* CONFIG_PNP */
-static void __init_or_module snd_cs423x_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnpc_registered)
- pnp_unregister_card_driver(&cs423x_pnpc_driver);
-#ifdef CS4232
- if (pnp_registered)
- pnp_unregister_driver(&cs4232_pnp_driver);
-#endif
-#endif /* CONFIG_PNP */
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&cs423x_nonpnp_driver);
-}
-
static int __init alsa_card_cs423x_init(void)
{
- int i, err;
+ int err;
- if ((err = platform_driver_register(&cs423x_nonpnp_driver)) < 0)
+ err = isa_register_driver(&cs423x_isa_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
-
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i] || is_isapnp_selected(i))
- continue;
- device = platform_device_register_simple(CS423X_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- snd_cs423x_devices++;
- }
#ifdef CONFIG_PNP
#ifdef CS4232
err = pnp_register_driver(&cs4232_pnp_driver);
@@ -799,20 +782,20 @@
if (!err)
pnpc_registered = 1;
#endif /* CONFIG_PNP */
-
- if (!snd_cs423x_devices) {
-#ifdef MODULE
- printk(KERN_ERR IDENT " soundcard not found or device busy\n");
-#endif
- snd_cs423x_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_cs423x_exit(void)
{
- snd_cs423x_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnpc_registered)
+ pnp_unregister_card_driver(&cs423x_pnpc_driver);
+#ifdef CS4232
+ if (pnp_registered)
+ pnp_unregister_driver(&cs4232_pnp_driver);
+#endif
+#endif /* CONFIG_PNP */
+ isa_unregister_driver(&cs423x_isa_driver);
}
module_init(alsa_card_cs423x_init)
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 65f97ff..edc3987 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/time.h>
#include <linux/wait.h>
#include <linux/moduleparam.h>
@@ -35,8 +35,11 @@
#define SNDRV_LEGACY_FIND_FREE_DMA
#include <sound/initval.h>
+#define CRD_NAME "Generic ESS ES1688/ES688 AudioDrive"
+#define DEV_NAME "es1688"
+
+MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>");
-MODULE_DESCRIPTION("ESS ESx688 AudioDrive");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{ESS,ES688 PnP AudioDrive,pnp:ESS0100},"
"{ESS,ES1688 PnP AudioDrive,pnp:ESS0102},"
@@ -53,189 +56,157 @@
static int dma8[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0,1,3 */
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for ESx688 soundcard.");
+MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for ESx688 soundcard.");
+MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable ESx688 soundcard.");
+MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
module_param_array(port, long, NULL, 0444);
-MODULE_PARM_DESC(port, "Port # for ESx688 driver.");
+MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
module_param_array(mpu_port, long, NULL, 0444);
-MODULE_PARM_DESC(mpu_port, "MPU-401 port # for ESx688 driver.");
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
module_param_array(irq, int, NULL, 0444);
-MODULE_PARM_DESC(irq, "IRQ # for ESx688 driver.");
+MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
module_param_array(mpu_irq, int, NULL, 0444);
-MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for ESx688 driver.");
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
module_param_array(dma8, int, NULL, 0444);
-MODULE_PARM_DESC(dma8, "8-bit DMA # for ESx688 driver.");
+MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver.");
-static struct platform_device *devices[SNDRV_CARDS];
-
-#define PFX "es1688: "
-
-static int __devinit snd_es1688_probe(struct platform_device *pdev)
+static int __devinit snd_es1688_match(struct device *dev, unsigned int n)
{
- int dev = pdev->id;
+ return enable[n];
+}
+
+static int __devinit snd_es1688_legacy_create(struct snd_card *card,
+ struct device *dev, unsigned int n, struct snd_es1688 **rchip)
+{
+ static long possible_ports[] = {0x220, 0x240, 0x260};
static int possible_irqs[] = {5, 9, 10, 7, -1};
static int possible_dmas[] = {1, 3, 0, -1};
- int xirq, xdma, xmpu_irq;
+
+ int i, error;
+
+ if (irq[n] == SNDRV_AUTO_IRQ) {
+ irq[n] = snd_legacy_find_free_irq(possible_irqs);
+ if (irq[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free IRQ\n",
+ dev->bus_id);
+ return -EBUSY;
+ }
+ }
+ if (dma8[n] == SNDRV_AUTO_DMA) {
+ dma8[n] = snd_legacy_find_free_dma(possible_dmas);
+ if (dma8[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free DMA\n",
+ dev->bus_id);
+ return -EBUSY;
+ }
+ }
+
+ if (port[n] != SNDRV_AUTO_PORT)
+ return snd_es1688_create(card, port[n], mpu_port[n], irq[n],
+ mpu_irq[n], dma8[n], ES1688_HW_AUTO, rchip);
+
+ i = 0;
+ do {
+ port[n] = possible_ports[i];
+ error = snd_es1688_create(card, port[n], mpu_port[n], irq[n],
+ mpu_irq[n], dma8[n], ES1688_HW_AUTO, rchip);
+ } while (error < 0 && ++i < ARRAY_SIZE(possible_ports));
+
+ return error;
+}
+
+static int __devinit snd_es1688_probe(struct device *dev, unsigned int n)
+{
struct snd_card *card;
struct snd_es1688 *chip;
struct snd_opl3 *opl3;
struct snd_pcm *pcm;
- int err;
+ int error;
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
+ card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
+ if (!card)
+ return -EINVAL;
- xirq = irq[dev];
- if (xirq == SNDRV_AUTO_IRQ) {
- if ((xirq = snd_legacy_find_free_irq(possible_irqs)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free IRQ\n");
- err = -EBUSY;
- goto _err;
- }
- }
- xmpu_irq = mpu_irq[dev];
- xdma = dma8[dev];
- if (xdma == SNDRV_AUTO_DMA) {
- if ((xdma = snd_legacy_find_free_dma(possible_dmas)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free DMA\n");
- err = -EBUSY;
- goto _err;
- }
- }
+ error = snd_es1688_legacy_create(card, dev, n, &chip);
+ if (error < 0)
+ goto out;
- if (port[dev] != SNDRV_AUTO_PORT) {
- if ((err = snd_es1688_create(card, port[dev], mpu_port[dev],
- xirq, xmpu_irq, xdma,
- ES1688_HW_AUTO, &chip)) < 0)
- goto _err;
- } else {
- /* auto-probe legacy ports */
- static unsigned long possible_ports[] = {
- 0x220, 0x240, 0x260,
- };
- int i;
- for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
- err = snd_es1688_create(card, possible_ports[i],
- mpu_port[dev],
- xirq, xmpu_irq, xdma,
- ES1688_HW_AUTO, &chip);
- if (err >= 0) {
- port[dev] = possible_ports[i];
- break;
- }
- }
- if (i >= ARRAY_SIZE(possible_ports))
- goto _err;
- }
+ error = snd_es1688_pcm(chip, 0, &pcm);
+ if (error < 0)
+ goto out;
- if ((err = snd_es1688_pcm(chip, 0, &pcm)) < 0)
- goto _err;
-
- if ((err = snd_es1688_mixer(chip)) < 0)
- goto _err;
+ error = snd_es1688_mixer(chip);
+ if (error < 0)
+ goto out;
strcpy(card->driver, "ES1688");
strcpy(card->shortname, pcm->name);
- sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", pcm->name, chip->port, xirq, xdma);
+ sprintf(card->longname, "%s at 0x%lx, irq %i, dma %i", pcm->name,
+ chip->port, chip->irq, chip->dma8);
- if ((snd_opl3_create(card, chip->port, chip->port + 2, OPL3_HW_OPL3, 0, &opl3)) < 0) {
- printk(KERN_WARNING PFX "opl3 not detected at 0x%lx\n", chip->port);
- } else {
- if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0)
- goto _err;
+ if (snd_opl3_create(card, chip->port, chip->port + 2,
+ OPL3_HW_OPL3, 0, &opl3) < 0)
+ printk(KERN_WARNING "%s: opl3 not detected at 0x%lx\n",
+ dev->bus_id, chip->port);
+ else {
+ error = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+ if (error < 0)
+ goto out;
}
- if (xmpu_irq >= 0 && xmpu_irq != SNDRV_AUTO_IRQ && chip->mpu_port > 0) {
- if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
- chip->mpu_port, 0,
- xmpu_irq,
- IRQF_DISABLED,
- NULL)) < 0)
- goto _err;
+ if (mpu_irq[n] >= 0 && mpu_irq[n] != SNDRV_AUTO_IRQ &&
+ chip->mpu_port > 0) {
+ error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
+ chip->mpu_port, 0,
+ mpu_irq[n], IRQF_DISABLED, NULL);
+ if (error < 0)
+ goto out;
}
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, dev);
- if ((err = snd_card_register(card)) < 0)
- goto _err;
+ error = snd_card_register(card);
+ if (error < 0)
+ goto out;
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(dev, card);
return 0;
- _err:
- snd_card_free(card);
- return err;
+out: snd_card_free(card);
+ return error;
}
-static int __devexit snd_es1688_remove(struct platform_device *devptr)
+static int __devexit snd_es1688_remove(struct device *dev, unsigned int n)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
return 0;
}
-#define ES1688_DRIVER "snd_es1688"
-
-static struct platform_driver snd_es1688_driver = {
+static struct isa_driver snd_es1688_driver = {
+ .match = snd_es1688_match,
.probe = snd_es1688_probe,
- .remove = __devexit_p(snd_es1688_remove),
- /* FIXME: suspend/resume */
+ .remove = snd_es1688_remove,
+#if 0 /* FIXME */
+ .suspend = snd_es1688_suspend,
+ .resume = snd_es1688_resume,
+#endif
.driver = {
- .name = ES1688_DRIVER
- },
+ .name = DEV_NAME
+ }
};
-static void __init_or_module snd_es1688_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_es1688_driver);
-}
-
static int __init alsa_card_es1688_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_es1688_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(ES1688_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "ESS AudioDrive ES1688 soundcard not found or device busy\n");
-#endif
- snd_es1688_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_es1688_driver, SNDRV_CARDS);
}
static void __exit alsa_card_es1688_exit(void)
{
- snd_es1688_unregister_all();
+ isa_unregister_driver(&snd_es1688_driver);
}
-module_init(alsa_card_es1688_init)
-module_exit(alsa_card_es1688_exit)
+module_init(alsa_card_es1688_init);
+module_exit(alsa_card_es1688_exit);
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index 725c115..d2a9c7d 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -80,7 +80,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/isapnp.h>
@@ -2035,8 +2035,6 @@
module_param_array(dma2, int, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver.");
-static struct platform_device *platform_devices[SNDRV_CARDS];
-
#ifdef CONFIG_PNP
static int pnp_registered, pnpc_registered;
@@ -2237,7 +2235,12 @@
return snd_card_register(card);
}
-static int __devinit snd_es18xx_nonpnp_probe1(int dev, struct platform_device *devptr)
+static int __devinit snd_es18xx_isa_match(struct device *pdev, unsigned int dev)
+{
+ return enable[dev] && !is_isapnp_selected(dev);
+}
+
+static int __devinit snd_es18xx_isa_probe1(int dev, struct device *devptr)
{
struct snd_card *card;
int err;
@@ -2245,18 +2248,17 @@
card = snd_es18xx_card_new(dev);
if (! card)
return -ENOMEM;
- snd_card_set_dev(card, &devptr->dev);
+ snd_card_set_dev(card, devptr);
if ((err = snd_audiodrive_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(devptr, card);
+ dev_set_drvdata(devptr, card);
return 0;
}
-static int __devinit snd_es18xx_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_es18xx_isa_probe(struct device *pdev, unsigned int dev)
{
- int dev = pdev->id;
int err;
static int possible_irqs[] = {5, 9, 10, 7, 11, 12, -1};
static int possible_dmas[] = {1, 0, 3, 5, -1};
@@ -2281,13 +2283,13 @@
}
if (port[dev] != SNDRV_AUTO_PORT) {
- return snd_es18xx_nonpnp_probe1(dev, pdev);
+ return snd_es18xx_isa_probe1(dev, pdev);
} else {
static unsigned long possible_ports[] = {0x220, 0x240, 0x260, 0x280};
int i;
for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
port[dev] = possible_ports[i];
- err = snd_es18xx_nonpnp_probe1(dev, pdev);
+ err = snd_es18xx_isa_probe1(dev, pdev);
if (! err)
return 0;
}
@@ -2295,43 +2297,44 @@
}
}
-static int __devexit snd_es18xx_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_es18xx_isa_remove(struct device *devptr,
+ unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_es18xx_nonpnp_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_es18xx_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
{
- return snd_es18xx_suspend(platform_get_drvdata(dev), state);
+ return snd_es18xx_suspend(dev_get_drvdata(dev), state);
}
-static int snd_es18xx_nonpnp_resume(struct platform_device *dev)
+static int snd_es18xx_isa_resume(struct device *dev, unsigned int n)
{
- return snd_es18xx_resume(platform_get_drvdata(dev));
+ return snd_es18xx_resume(dev_get_drvdata(dev));
}
#endif
-#define ES18XX_DRIVER "snd_es18xx"
+#define DEV_NAME "es18xx"
-static struct platform_driver snd_es18xx_nonpnp_driver = {
- .probe = snd_es18xx_nonpnp_probe,
- .remove = __devexit_p(snd_es18xx_nonpnp_remove),
+static struct isa_driver snd_es18xx_isa_driver = {
+ .match = snd_es18xx_isa_match,
+ .probe = snd_es18xx_isa_probe,
+ .remove = __devexit_p(snd_es18xx_isa_remove),
#ifdef CONFIG_PM
- .suspend = snd_es18xx_nonpnp_suspend,
- .resume = snd_es18xx_nonpnp_resume,
+ .suspend = snd_es18xx_isa_suspend,
+ .resume = snd_es18xx_isa_resume,
#endif
.driver = {
- .name = ES18XX_DRIVER
+ .name = DEV_NAME
},
};
#ifdef CONFIG_PNP
-static unsigned int __devinitdata es18xx_pnp_devices;
-
static int __devinit snd_audiodrive_pnp_detect(struct pnp_dev *pdev,
const struct pnp_device_id *id)
{
@@ -2362,7 +2365,6 @@
}
pnp_set_drvdata(pdev, card);
dev++;
- es18xx_pnp_devices++;
return 0;
}
@@ -2424,7 +2426,6 @@
pnp_set_card_drvdata(pcard, card);
dev++;
- es18xx_pnp_devices++;
return 0;
}
@@ -2460,44 +2461,14 @@
};
#endif /* CONFIG_PNP */
-static void __init_or_module snd_es18xx_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnpc_registered)
- pnp_unregister_card_driver(&es18xx_pnpc_driver);
- if (pnp_registered)
- pnp_unregister_driver(&es18xx_pnp_driver);
-#endif
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_es18xx_nonpnp_driver);
-}
-
static int __init alsa_card_es18xx_init(void)
{
- int i, err, cards = 0;
+ int err;
- if ((err = platform_driver_register(&snd_es18xx_nonpnp_driver)) < 0)
+ err = isa_register_driver(&snd_es18xx_isa_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i] || is_isapnp_selected(i))
- continue;
- device = platform_device_register_simple(ES18XX_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- cards++;
- }
-
#ifdef CONFIG_PNP
err = pnp_register_driver(&es18xx_pnp_driver);
if (!err)
@@ -2505,22 +2476,19 @@
err = pnp_register_card_driver(&es18xx_pnpc_driver);
if (!err)
pnpc_registered = 1;
- cards += es18xx_pnp_devices;
#endif
-
- if(!cards) {
-#ifdef MODULE
- snd_printk(KERN_ERR "ESS AudioDrive ES18xx soundcard not found or device busy\n");
-#endif
- snd_es18xx_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_es18xx_exit(void)
{
- snd_es18xx_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnpc_registered)
+ pnp_unregister_card_driver(&es18xx_pnpc_driver);
+ if (pnp_registered)
+ pnp_unregister_driver(&es18xx_pnp_driver);
+#endif
+ isa_unregister_driver(&snd_es18xx_isa_driver);
}
module_init(alsa_card_es18xx_init)
diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c
index 0395e2e..8f23f43 100644
--- a/sound/isa/gus/gusclassic.c
+++ b/sound/isa/gus/gusclassic.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/moduleparam.h>
@@ -33,8 +33,11 @@
#define SNDRV_LEGACY_FIND_FREE_DMA
#include <sound/initval.h>
+#define CRD_NAME "Gravis UltraSound Classic"
+#define DEV_NAME "gusclassic"
+
+MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>");
-MODULE_DESCRIPTION("Gravis UltraSound Classic");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Gravis,UltraSound Classic}}");
@@ -51,32 +54,80 @@
static int pcm_channels[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for GUS Classic soundcard.");
+MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for GUS Classic soundcard.");
+MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable GUS Classic soundcard.");
+MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
module_param_array(port, long, NULL, 0444);
-MODULE_PARM_DESC(port, "Port # for GUS Classic driver.");
+MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
module_param_array(irq, int, NULL, 0444);
-MODULE_PARM_DESC(irq, "IRQ # for GUS Classic driver.");
+MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
module_param_array(dma1, int, NULL, 0444);
-MODULE_PARM_DESC(dma1, "DMA1 # for GUS Classic driver.");
+MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver.");
module_param_array(dma2, int, NULL, 0444);
-MODULE_PARM_DESC(dma2, "DMA2 # for GUS Classic driver.");
+MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver.");
module_param_array(joystick_dac, int, NULL, 0444);
-MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for GUS Classic driver.");
+MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver.");
module_param_array(channels, int, NULL, 0444);
-MODULE_PARM_DESC(channels, "GF1 channels for GUS Classic driver.");
+MODULE_PARM_DESC(channels, "GF1 channels for " CRD_NAME " driver.");
module_param_array(pcm_channels, int, NULL, 0444);
-MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for GUS Classic driver.");
+MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for " CRD_NAME " driver.");
-static struct platform_device *devices[SNDRV_CARDS];
+static int __devinit snd_gusclassic_match(struct device *dev, unsigned int n)
+{
+ return enable[n];
+}
+static int __devinit snd_gusclassic_create(struct snd_card *card,
+ struct device *dev, unsigned int n, struct snd_gus_card **rgus)
+{
+ static long possible_ports[] = {0x220, 0x230, 0x240, 0x250, 0x260};
+ static int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, 4, -1};
+ static int possible_dmas[] = {5, 6, 7, 1, 3, -1};
-#define PFX "gusclassic: "
+ int i, error;
-static int __devinit snd_gusclassic_detect(struct snd_gus_card * gus)
+ if (irq[n] == SNDRV_AUTO_IRQ) {
+ irq[n] = snd_legacy_find_free_irq(possible_irqs);
+ if (irq[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free IRQ\n",
+ dev->bus_id);
+ return -EBUSY;
+ }
+ }
+ if (dma1[n] == SNDRV_AUTO_DMA) {
+ dma1[n] = snd_legacy_find_free_dma(possible_dmas);
+ if (dma1[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free DMA1\n",
+ dev->bus_id);
+ return -EBUSY;
+ }
+ }
+ if (dma2[n] == SNDRV_AUTO_DMA) {
+ dma2[n] = snd_legacy_find_free_dma(possible_dmas);
+ if (dma2[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free DMA2\n",
+ dev->bus_id);
+ return -EBUSY;
+ }
+ }
+
+ if (port[n] != SNDRV_AUTO_PORT)
+ return snd_gus_create(card, port[n], irq[n], dma1[n], dma2[n],
+ 0, channels[n], pcm_channels[n], 0, rgus);
+
+ i = 0;
+ do {
+ port[n] = possible_ports[i];
+ error = snd_gus_create(card, port[n], irq[n], dma1[n], dma2[n],
+ 0, channels[n], pcm_channels[n], 0, rgus);
+ } while (error < 0 && ++i < ARRAY_SIZE(possible_ports));
+
+ return error;
+}
+
+static int __devinit snd_gusclassic_detect(struct snd_gus_card *gus)
{
unsigned char d;
@@ -95,187 +146,104 @@
return 0;
}
-static void __devinit snd_gusclassic_init(int dev, struct snd_gus_card * gus)
+static int __devinit snd_gusclassic_probe(struct device *dev, unsigned int n)
{
- gus->equal_irq = 0;
- gus->codec_flag = 0;
- gus->max_flag = 0;
- gus->joystick_dac = joystick_dac[dev];
-}
-
-static int __devinit snd_gusclassic_probe(struct platform_device *pdev)
-{
- int dev = pdev->id;
- static int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, 4, -1};
- static int possible_dmas[] = {5, 6, 7, 1, 3, -1};
- int xirq, xdma1, xdma2;
struct snd_card *card;
- struct snd_gus_card *gus = NULL;
- int err;
+ struct snd_gus_card *gus;
+ int error;
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
- if (pcm_channels[dev] < 2)
- pcm_channels[dev] = 2;
+ card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
+ if (!card)
+ return -EINVAL;
- xirq = irq[dev];
- if (xirq == SNDRV_AUTO_IRQ) {
- if ((xirq = snd_legacy_find_free_irq(possible_irqs)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free IRQ\n");
- err = -EBUSY;
- goto _err;
- }
- }
- xdma1 = dma1[dev];
- if (xdma1 == SNDRV_AUTO_DMA) {
- if ((xdma1 = snd_legacy_find_free_dma(possible_dmas)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free DMA1\n");
- err = -EBUSY;
- goto _err;
- }
- }
- xdma2 = dma2[dev];
- if (xdma2 == SNDRV_AUTO_DMA) {
- if ((xdma2 = snd_legacy_find_free_dma(possible_dmas)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free DMA2\n");
- err = -EBUSY;
- goto _err;
- }
- }
+ if (pcm_channels[n] < 2)
+ pcm_channels[n] = 2;
- if (port[dev] != SNDRV_AUTO_PORT) {
- err = snd_gus_create(card,
- port[dev],
- xirq, xdma1, xdma2,
- 0, channels[dev], pcm_channels[dev],
- 0, &gus);
- } else {
- /* auto-probe legacy ports */
- static unsigned long possible_ports[] = {
- 0x220, 0x230, 0x240, 0x250, 0x260,
- };
- int i;
- for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
- err = snd_gus_create(card,
- possible_ports[i],
- xirq, xdma1, xdma2,
- 0, channels[dev], pcm_channels[dev],
- 0, &gus);
- if (err >= 0) {
- port[dev] = possible_ports[i];
- break;
- }
- }
- }
- if (err < 0)
- goto _err;
+ error = snd_gusclassic_create(card, dev, n, &gus);
+ if (error < 0)
+ goto out;
- if ((err = snd_gusclassic_detect(gus)) < 0)
- goto _err;
+ error = snd_gusclassic_detect(gus);
+ if (error < 0)
+ goto out;
- snd_gusclassic_init(dev, gus);
- if ((err = snd_gus_initialize(gus)) < 0)
- goto _err;
+ gus->joystick_dac = joystick_dac[n];
+ error = snd_gus_initialize(gus);
+ if (error < 0)
+ goto out;
+
+ error = -ENODEV;
if (gus->max_flag || gus->ess_flag) {
- snd_printk(KERN_ERR PFX "GUS Classic or ACE soundcard was not detected at 0x%lx\n", gus->gf1.port);
- err = -ENODEV;
- goto _err;
+ snd_printk(KERN_ERR "%s: GUS Classic or ACE soundcard was "
+ "not detected at 0x%lx\n", dev->bus_id, gus->gf1.port);
+ goto out;
}
- if ((err = snd_gf1_new_mixer(gus)) < 0)
- goto _err;
+ error = snd_gf1_new_mixer(gus);
+ if (error < 0)
+ goto out;
- if ((err = snd_gf1_pcm_new(gus, 0, 0, NULL)) < 0)
- goto _err;
+ error = snd_gf1_pcm_new(gus, 0, 0, NULL);
+ if (error < 0)
+ goto out;
if (!gus->ace_flag) {
- if ((err = snd_gf1_rawmidi_new(gus, 0, NULL)) < 0)
- goto _err;
+ error = snd_gf1_rawmidi_new(gus, 0, NULL);
+ if (error < 0)
+ goto out;
}
- sprintf(card->longname + strlen(card->longname), " at 0x%lx, irq %d, dma %d", gus->gf1.port, xirq, xdma1);
- if (xdma2 >= 0)
- sprintf(card->longname + strlen(card->longname), "&%d", xdma2);
- snd_card_set_dev(card, &pdev->dev);
+ sprintf(card->longname + strlen(card->longname),
+ " at 0x%lx, irq %d, dma %d",
+ gus->gf1.port, gus->gf1.irq, gus->gf1.dma1);
- if ((err = snd_card_register(card)) < 0)
- goto _err;
+ if (gus->gf1.dma2 >= 0)
+ sprintf(card->longname + strlen(card->longname),
+ "&%d", gus->gf1.dma2);
- platform_set_drvdata(pdev, card);
+ snd_card_set_dev(card, dev);
+
+ error = snd_card_register(card);
+ if (error < 0)
+ goto out;
+
+ dev_set_drvdata(dev, card);
return 0;
- _err:
- snd_card_free(card);
- return err;
+out: snd_card_free(card);
+ return error;
}
-static int __devexit snd_gusclassic_remove(struct platform_device *devptr)
+static int __devexit snd_gusclassic_remove(struct device *dev, unsigned int n)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
return 0;
}
-#define GUSCLASSIC_DRIVER "snd_gusclassic"
-
-static struct platform_driver snd_gusclassic_driver = {
+static struct isa_driver snd_gusclassic_driver = {
+ .match = snd_gusclassic_match,
.probe = snd_gusclassic_probe,
.remove = __devexit_p(snd_gusclassic_remove),
- /* FIXME: suspend/resume */
+#if 0 /* FIXME */
+ .suspend = snd_gusclassic_suspend,
+ .remove = snd_gusclassic_remove,
+#endif
.driver = {
- .name = GUSCLASSIC_DRIVER
- },
+ .name = DEV_NAME
+ }
};
-static void __init_or_module snd_gusclassic_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_gusclassic_driver);
-}
-
static int __init alsa_card_gusclassic_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_gusclassic_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(GUSCLASSIC_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "GUS Classic soundcard not found or device busy\n");
-#endif
- snd_gusclassic_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_gusclassic_driver, SNDRV_CARDS);
}
static void __exit alsa_card_gusclassic_exit(void)
{
- snd_gusclassic_unregister_all();
+ isa_unregister_driver(&snd_gusclassic_driver);
}
-module_init(alsa_card_gusclassic_init)
-module_exit(alsa_card_gusclassic_exit)
+module_init(alsa_card_gusclassic_init);
+module_exit(alsa_card_gusclassic_exit);
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 4f55fc3..0aeaa6c 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/moduleparam.h>
@@ -37,8 +37,11 @@
#define SNDRV_LEGACY_FIND_FREE_DMA
#include <sound/initval.h>
+#define CRD_NAME "Gravis UltraSound Extreme"
+#define DEV_NAME "gusextreme"
+
+MODULE_DESCRIPTION(CRD_NAME);
MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>");
-MODULE_DESCRIPTION("Gravis UltraSound Extreme");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Gravis,UltraSound Extreme}}");
@@ -59,43 +62,107 @@
static int pcm_channels[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for GUS Extreme soundcard.");
+MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for GUS Extreme soundcard.");
+MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable GUS Extreme soundcard.");
+MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
module_param_array(port, long, NULL, 0444);
-MODULE_PARM_DESC(port, "Port # for GUS Extreme driver.");
+MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
module_param_array(gf1_port, long, NULL, 0444);
-MODULE_PARM_DESC(gf1_port, "GF1 port # for GUS Extreme driver (optional).");
+MODULE_PARM_DESC(gf1_port, "GF1 port # for " CRD_NAME " driver (optional).");
module_param_array(mpu_port, long, NULL, 0444);
-MODULE_PARM_DESC(mpu_port, "MPU-401 port # for GUS Extreme driver.");
+MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
module_param_array(irq, int, NULL, 0444);
-MODULE_PARM_DESC(irq, "IRQ # for GUS Extreme driver.");
+MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
module_param_array(mpu_irq, int, NULL, 0444);
-MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for GUS Extreme driver.");
+MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
module_param_array(gf1_irq, int, NULL, 0444);
-MODULE_PARM_DESC(gf1_irq, "GF1 IRQ # for GUS Extreme driver.");
+MODULE_PARM_DESC(gf1_irq, "GF1 IRQ # for " CRD_NAME " driver.");
module_param_array(dma8, int, NULL, 0444);
-MODULE_PARM_DESC(dma8, "8-bit DMA # for GUS Extreme driver.");
+MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver.");
module_param_array(dma1, int, NULL, 0444);
-MODULE_PARM_DESC(dma1, "GF1 DMA # for GUS Extreme driver.");
+MODULE_PARM_DESC(dma1, "GF1 DMA # for " CRD_NAME " driver.");
module_param_array(joystick_dac, int, NULL, 0444);
-MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for GUS Extreme driver.");
+MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver.");
module_param_array(channels, int, NULL, 0444);
-MODULE_PARM_DESC(channels, "GF1 channels for GUS Extreme driver.");
+MODULE_PARM_DESC(channels, "GF1 channels for " CRD_NAME " driver.");
module_param_array(pcm_channels, int, NULL, 0444);
-MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for GUS Extreme driver.");
+MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for " CRD_NAME " driver.");
-static struct platform_device *devices[SNDRV_CARDS];
+static int __devinit snd_gusextreme_match(struct device *dev, unsigned int n)
+{
+ return enable[n];
+}
+static int __devinit snd_gusextreme_es1688_create(struct snd_card *card,
+ struct device *dev, unsigned int n, struct snd_es1688 **rchip)
+{
+ static long possible_ports[] = {0x220, 0x240, 0x260};
+ static int possible_irqs[] = {5, 9, 10, 7, -1};
+ static int possible_dmas[] = {1, 3, 0, -1};
-#define PFX "gusextreme: "
+ int i, error;
-static int __devinit snd_gusextreme_detect(int dev,
- struct snd_card *card,
- struct snd_gus_card * gus,
- struct snd_es1688 *es1688)
+ if (irq[n] == SNDRV_AUTO_IRQ) {
+ irq[n] = snd_legacy_find_free_irq(possible_irqs);
+ if (irq[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free IRQ "
+ "for ES1688\n", dev->bus_id);
+ return -EBUSY;
+ }
+ }
+ if (dma8[n] == SNDRV_AUTO_DMA) {
+ dma8[n] = snd_legacy_find_free_dma(possible_dmas);
+ if (dma8[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free DMA "
+ "for ES1688\n", dev->bus_id);
+ return -EBUSY;
+ }
+ }
+
+ if (port[n] != SNDRV_AUTO_PORT)
+ return snd_es1688_create(card, port[n], mpu_port[n], irq[n],
+ mpu_irq[n], dma8[n], ES1688_HW_1688, rchip);
+
+ i = 0;
+ do {
+ port[n] = possible_ports[i];
+ error = snd_es1688_create(card, port[n], mpu_port[n], irq[n],
+ mpu_irq[n], dma8[n], ES1688_HW_1688, rchip);
+ } while (error < 0 && ++i < ARRAY_SIZE(possible_ports));
+
+ return error;
+}
+
+static int __devinit snd_gusextreme_gus_card_create(struct snd_card *card,
+ struct device *dev, unsigned int n, struct snd_gus_card **rgus)
+{
+ static int possible_irqs[] = {11, 12, 15, 9, 5, 7, 3, -1};
+ static int possible_dmas[] = {5, 6, 7, 3, 1, -1};
+
+ if (gf1_irq[n] == SNDRV_AUTO_IRQ) {
+ gf1_irq[n] = snd_legacy_find_free_irq(possible_irqs);
+ if (gf1_irq[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free IRQ "
+ "for GF1\n", dev->bus_id);
+ return -EBUSY;
+ }
+ }
+ if (dma1[n] == SNDRV_AUTO_DMA) {
+ dma1[n] = snd_legacy_find_free_dma(possible_dmas);
+ if (dma1[n] < 0) {
+ snd_printk(KERN_ERR "%s: unable to find a free DMA "
+ "for GF1\n", dev->bus_id);
+ return -EBUSY;
+ }
+ }
+ return snd_gus_create(card, gf1_port[n], gf1_irq[n], dma1[n], -1,
+ 0, channels[n], pcm_channels[n], 0, rgus);
+}
+
+static int __devinit snd_gusextreme_detect(struct snd_gus_card *gus,
+ struct snd_es1688 *es1688)
{
unsigned long flags;
unsigned char d;
@@ -117,12 +184,13 @@
spin_lock_irqsave(&es1688->mixer_lock, flags);
snd_es1688_mixer_write(es1688, 0x40, 0x0b); /* don't change!!! */
spin_unlock_irqrestore(&es1688->mixer_lock, flags);
+
spin_lock_irqsave(&es1688->reg_lock, flags);
- outb(gf1_port[dev] & 0x040 ? 2 : 0, ES1688P(es1688, INIT1));
+ outb(gus->gf1.port & 0x040 ? 2 : 0, ES1688P(es1688, INIT1));
outb(0, 0x201);
- outb(gf1_port[dev] & 0x020 ? 2 : 0, ES1688P(es1688, INIT1));
+ outb(gus->gf1.port & 0x020 ? 2 : 0, ES1688P(es1688, INIT1));
outb(0, 0x201);
- outb(gf1_port[dev] & 0x010 ? 3 : 1, ES1688P(es1688, INIT1));
+ outb(gus->gf1.port & 0x010 ? 3 : 1, ES1688P(es1688, INIT1));
spin_unlock_irqrestore(&es1688->reg_lock, flags);
udelay(100);
@@ -139,253 +207,172 @@
snd_printdd("[0x%lx] check 2 failed - 0x%x\n", gus->gf1.port, d);
return -EIO;
}
- return 0;
-}
-static void __devinit snd_gusextreme_init(int dev, struct snd_gus_card * gus)
-{
- gus->joystick_dac = joystick_dac[dev];
+ return 0;
}
static int __devinit snd_gusextreme_mixer(struct snd_es1688 *chip)
{
struct snd_card *card = chip->card;
struct snd_ctl_elem_id id1, id2;
- int err;
+ int error;
memset(&id1, 0, sizeof(id1));
memset(&id2, 0, sizeof(id2));
id1.iface = id2.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+
/* reassign AUX to SYNTHESIZER */
strcpy(id1.name, "Aux Playback Volume");
strcpy(id2.name, "Synth Playback Volume");
- if ((err = snd_ctl_rename_id(card, &id1, &id2)) < 0)
- return err;
+ error = snd_ctl_rename_id(card, &id1, &id2);
+ if (error < 0)
+ return error;
+
/* reassign Master Playback Switch to Synth Playback Switch */
strcpy(id1.name, "Master Playback Switch");
strcpy(id2.name, "Synth Playback Switch");
- if ((err = snd_ctl_rename_id(card, &id1, &id2)) < 0)
- return err;
+ error = snd_ctl_rename_id(card, &id1, &id2);
+ if (error < 0)
+ return error;
+
return 0;
}
-static int __devinit snd_gusextreme_probe(struct platform_device *pdev)
+static int __devinit snd_gusextreme_probe(struct device *dev, unsigned int n)
{
- int dev = pdev->id;
- static int possible_ess_irqs[] = {5, 9, 10, 7, -1};
- static int possible_ess_dmas[] = {1, 3, 0, -1};
- static int possible_gf1_irqs[] = {5, 11, 12, 9, 7, 15, 3, -1};
- static int possible_gf1_dmas[] = {5, 6, 7, 1, 3, -1};
- int xgf1_irq, xgf1_dma, xess_irq, xmpu_irq, xess_dma;
struct snd_card *card;
struct snd_gus_card *gus;
struct snd_es1688 *es1688;
struct snd_opl3 *opl3;
- int err;
+ int error;
- card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
- if (card == NULL)
- return -ENOMEM;
+ card = snd_card_new(index[n], id[n], THIS_MODULE, 0);
+ if (!card)
+ return -EINVAL;
- xgf1_irq = gf1_irq[dev];
- if (xgf1_irq == SNDRV_AUTO_IRQ) {
- if ((xgf1_irq = snd_legacy_find_free_irq(possible_gf1_irqs)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free IRQ for GF1\n");
- err = -EBUSY;
- goto out;
- }
- }
- xess_irq = irq[dev];
- if (xess_irq == SNDRV_AUTO_IRQ) {
- if ((xess_irq = snd_legacy_find_free_irq(possible_ess_irqs)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free IRQ for ES1688\n");
- err = -EBUSY;
- goto out;
- }
- }
- if (mpu_port[dev] == SNDRV_AUTO_PORT)
- mpu_port[dev] = 0;
- xmpu_irq = mpu_irq[dev];
- if (xmpu_irq > 15)
- xmpu_irq = -1;
- xgf1_dma = dma1[dev];
- if (xgf1_dma == SNDRV_AUTO_DMA) {
- if ((xgf1_dma = snd_legacy_find_free_dma(possible_gf1_dmas)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free DMA for GF1\n");
- err = -EBUSY;
- goto out;
- }
- }
- xess_dma = dma8[dev];
- if (xess_dma == SNDRV_AUTO_DMA) {
- if ((xess_dma = snd_legacy_find_free_dma(possible_ess_dmas)) < 0) {
- snd_printk(KERN_ERR PFX "unable to find a free DMA for ES1688\n");
- err = -EBUSY;
- goto out;
- }
- }
+ if (mpu_port[n] == SNDRV_AUTO_PORT)
+ mpu_port[n] = 0;
- if (port[dev] != SNDRV_AUTO_PORT) {
- err = snd_es1688_create(card, port[dev], mpu_port[dev],
- xess_irq, xmpu_irq, xess_dma,
- ES1688_HW_1688, &es1688);
- } else {
- /* auto-probe legacy ports */
- static unsigned long possible_ports[] = {0x220, 0x240, 0x260};
- int i;
- for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
- err = snd_es1688_create(card,
- possible_ports[i],
- mpu_port[dev],
- xess_irq, xmpu_irq, xess_dma,
- ES1688_HW_1688, &es1688);
- if (err >= 0) {
- port[dev] = possible_ports[i];
- break;
- }
- }
- }
- if (err < 0)
+ if (mpu_irq[n] > 15)
+ mpu_irq[n] = -1;
+
+ error = snd_gusextreme_es1688_create(card, dev, n, &es1688);
+ if (error < 0)
goto out;
- if (gf1_port[dev] < 0)
- gf1_port[dev] = port[dev] + 0x20;
- if ((err = snd_gus_create(card,
- gf1_port[dev],
- xgf1_irq,
- xgf1_dma,
- -1,
- 0, channels[dev],
- pcm_channels[dev], 0,
- &gus)) < 0)
+ if (gf1_port[n] < 0)
+ gf1_port[n] = es1688->port + 0x20;
+
+ error = snd_gusextreme_gus_card_create(card, dev, n, &gus);
+ if (error < 0)
goto out;
- if ((err = snd_gusextreme_detect(dev, card, gus, es1688)) < 0)
+ error = snd_gusextreme_detect(gus, es1688);
+ if (error < 0)
goto out;
- snd_gusextreme_init(dev, gus);
- if ((err = snd_gus_initialize(gus)) < 0)
+ gus->joystick_dac = joystick_dac[n];
+
+ error = snd_gus_initialize(gus);
+ if (error < 0)
goto out;
+ error = -ENODEV;
if (!gus->ess_flag) {
- snd_printk(KERN_ERR PFX "GUS Extreme soundcard was not detected at 0x%lx\n", gus->gf1.port);
- err = -ENODEV;
+ snd_printk(KERN_ERR "%s: GUS Extreme soundcard was not "
+ "detected at 0x%lx\n", dev->bus_id, gus->gf1.port);
goto out;
}
- if ((err = snd_es1688_pcm(es1688, 0, NULL)) < 0)
+ gus->codec_flag = 1;
+
+ error = snd_es1688_pcm(es1688, 0, NULL);
+ if (error < 0)
goto out;
- if ((err = snd_es1688_mixer(es1688)) < 0)
+ error = snd_es1688_mixer(es1688);
+ if (error < 0)
goto out;
snd_component_add(card, "ES1688");
- if (pcm_channels[dev] > 0) {
- if ((err = snd_gf1_pcm_new(gus, 1, 1, NULL)) < 0)
+
+ if (pcm_channels[n] > 0) {
+ error = snd_gf1_pcm_new(gus, 1, 1, NULL);
+ if (error < 0)
goto out;
}
- if ((err = snd_gf1_new_mixer(gus)) < 0)
+
+ error = snd_gf1_new_mixer(gus);
+ if (error < 0)
goto out;
- if ((err = snd_gusextreme_mixer(es1688)) < 0)
+ error = snd_gusextreme_mixer(es1688);
+ if (error < 0)
goto out;
if (snd_opl3_create(card, es1688->port, es1688->port + 2,
- OPL3_HW_OPL3, 0, &opl3) < 0) {
- printk(KERN_ERR PFX "gusextreme: opl3 not detected at 0x%lx\n", es1688->port);
- } else {
- if ((err = snd_opl3_hwdep_new(opl3, 0, 2, NULL)) < 0)
+ OPL3_HW_OPL3, 0, &opl3) < 0)
+ printk(KERN_ERR "%s: opl3 not detected at 0x%lx\n",
+ dev->bus_id, es1688->port);
+ else {
+ error = snd_opl3_hwdep_new(opl3, 0, 2, NULL);
+ if (error < 0)
goto out;
}
- if (es1688->mpu_port >= 0x300 &&
- (err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
- es1688->mpu_port, 0,
- xmpu_irq,
- IRQF_DISABLED,
- NULL)) < 0)
+ if (es1688->mpu_port >= 0x300) {
+ error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
+ es1688->mpu_port, 0,
+ mpu_irq[n], IRQF_DISABLED, NULL);
+ if (error < 0)
+ goto out;
+ }
+
+ sprintf(card->longname, "Gravis UltraSound Extreme at 0x%lx, "
+ "irq %i&%i, dma %i&%i", es1688->port,
+ gus->gf1.irq, es1688->irq, gus->gf1.dma1, es1688->dma8);
+
+ snd_card_set_dev(card, dev);
+
+ error = snd_card_register(card);
+ if (error < 0)
goto out;
- sprintf(card->longname, "Gravis UltraSound Extreme at 0x%lx, irq %i&%i, dma %i&%i",
- es1688->port, xgf1_irq, xess_irq, xgf1_dma, xess_dma);
-
- snd_card_set_dev(card, &pdev->dev);
-
- if ((err = snd_card_register(card)) < 0)
- goto out;
-
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(dev, card);
return 0;
- out:
- snd_card_free(card);
- return err;
+out: snd_card_free(card);
+ return error;
}
-static int __devexit snd_gusextreme_remove(struct platform_device *devptr)
+static int __devexit snd_gusextreme_remove(struct device *dev, unsigned int n)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(dev));
+ dev_set_drvdata(dev, NULL);
return 0;
}
-#define GUSEXTREME_DRIVER "snd_gusextreme"
-
-static struct platform_driver snd_gusextreme_driver = {
+static struct isa_driver snd_gusextreme_driver = {
+ .match = snd_gusextreme_match,
.probe = snd_gusextreme_probe,
- .remove = __devexit_p(snd_gusextreme_remove),
- /* FIXME: suspend/resume */
+ .remove = snd_gusextreme_remove,
+#if 0 /* FIXME */
+ .suspend = snd_gusextreme_suspend,
+ .resume = snd_gusextreme_resume,
+#endif
.driver = {
- .name = GUSEXTREME_DRIVER
- },
+ .name = DEV_NAME
+ }
};
-static void __init_or_module snd_gusextreme_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_gusextreme_driver);
-}
-
static int __init alsa_card_gusextreme_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_gusextreme_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(GUSEXTREME_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "GUS Extreme soundcard not found or device busy\n");
-#endif
- snd_gusextreme_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_gusextreme_driver, SNDRV_CARDS);
}
static void __exit alsa_card_gusextreme_exit(void)
{
- snd_gusextreme_unregister_all();
+ isa_unregister_driver(&snd_gusextreme_driver);
}
-module_init(alsa_card_gusextreme_init)
-module_exit(alsa_card_gusextreme_exit)
+module_init(alsa_card_gusextreme_init);
+module_exit(alsa_card_gusextreme_exit);
diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c
index d1ad90c..708783d 100644
--- a/sound/isa/gus/gusmax.c
+++ b/sound/isa/gus/gusmax.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/moduleparam.h>
@@ -72,8 +72,6 @@
module_param_array(pcm_channels, int, NULL, 0444);
MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for GUS MAX driver.");
-static struct platform_device *devices[SNDRV_CARDS];
-
struct snd_gusmax {
int irq;
struct snd_card *card;
@@ -205,9 +203,13 @@
free_irq(maxcard->irq, (void *)maxcard);
}
-static int __devinit snd_gusmax_probe(struct platform_device *pdev)
+static int __devinit snd_gusmax_match(struct device *pdev, unsigned int dev)
{
- int dev = pdev->id;
+ return enable[dev];
+}
+
+static int __devinit snd_gusmax_probe(struct device *pdev, unsigned int dev)
+{
static int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, -1};
static int possible_dmas[] = {5, 6, 7, 1, 3, -1};
int xirq, xdma1, xdma2, err;
@@ -333,7 +335,7 @@
if (xdma2 >= 0)
sprintf(card->longname + strlen(card->longname), "&%i", xdma2);
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_card_register(card)) < 0)
goto _err;
@@ -341,7 +343,7 @@
maxcard->gus = gus;
maxcard->cs4231 = cs4231;
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
_err:
@@ -349,70 +351,33 @@
return err;
}
-static int __devexit snd_gusmax_remove(struct platform_device *devptr)
+static int __devexit snd_gusmax_remove(struct device *devptr, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
-#define GUSMAX_DRIVER "snd_gusmax"
+#define DEV_NAME "gusmax"
-static struct platform_driver snd_gusmax_driver = {
+static struct isa_driver snd_gusmax_driver = {
+ .match = snd_gusmax_match,
.probe = snd_gusmax_probe,
.remove = __devexit_p(snd_gusmax_remove),
/* FIXME: suspend/resume */
.driver = {
- .name = GUSMAX_DRIVER
+ .name = DEV_NAME
},
};
-static void __init_or_module snd_gusmax_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_gusmax_driver);
-}
-
static int __init alsa_card_gusmax_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_gusmax_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(GUSMAX_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "GUS MAX soundcard not found or device busy\n");
-#endif
- snd_gusmax_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_gusmax_driver, SNDRV_CARDS);
}
static void __exit alsa_card_gusmax_exit(void)
{
- snd_gusmax_unregister_all();
+ isa_unregister_driver(&snd_gusmax_driver);
}
module_init(alsa_card_gusmax_init)
diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c
index 4ec2d79..3e46572 100644
--- a/sound/isa/gus/interwave.c
+++ b/sound/isa/gus/interwave.c
@@ -25,7 +25,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pnp.h>
@@ -115,9 +115,6 @@
module_param_array(effect, int, NULL, 0444);
MODULE_PARM_DESC(effect, "Effects enable for InterWave driver.");
-static struct platform_device *platform_devices[SNDRV_CARDS];
-static int pnp_registered;
-
struct snd_interwave {
int irq;
struct snd_card *card;
@@ -138,6 +135,7 @@
#ifdef CONFIG_PNP
+static int pnp_registered;
static struct pnp_card_device_id snd_interwave_pnpids[] = {
#ifndef SNDRV_STB
@@ -793,7 +791,7 @@
return 0;
}
-static int __devinit snd_interwave_nonpnp_probe1(int dev, struct platform_device *devptr)
+static int __devinit snd_interwave_isa_probe1(int dev, struct device *devptr)
{
struct snd_card *card;
int err;
@@ -802,18 +800,30 @@
if (! card)
return -ENOMEM;
- snd_card_set_dev(card, &devptr->dev);
+ snd_card_set_dev(card, devptr);
if ((err = snd_interwave_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(devptr, card);
+ dev_set_drvdata(devptr, card);
return 0;
}
-static int __devinit snd_interwave_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_interwave_isa_match(struct device *pdev,
+ unsigned int dev)
{
- int dev = pdev->id;
+ if (!enable[dev])
+ return 0;
+#ifdef CONFIG_PNP
+ if (isapnp[dev])
+ return 0;
+#endif
+ return 1;
+}
+
+static int __devinit snd_interwave_isa_probe(struct device *pdev,
+ unsigned int dev)
+{
int err;
static int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, -1};
static int possible_dmas[] = {0, 1, 3, 5, 6, 7, -1};
@@ -838,13 +848,13 @@
}
if (port[dev] != SNDRV_AUTO_PORT)
- return snd_interwave_nonpnp_probe1(dev, pdev);
+ return snd_interwave_isa_probe1(dev, pdev);
else {
static long possible_ports[] = {0x210, 0x220, 0x230, 0x240, 0x250, 0x260};
int i;
for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
port[dev] = possible_ports[i];
- err = snd_interwave_nonpnp_probe1(dev, pdev);
+ err = snd_interwave_isa_probe1(dev, pdev);
if (! err)
return 0;
}
@@ -852,16 +862,17 @@
}
}
-static int __devexit snd_interwave_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_interwave_isa_remove(struct device *devptr, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
-static struct platform_driver snd_interwave_driver = {
- .probe = snd_interwave_nonpnp_probe,
- .remove = __devexit_p(snd_interwave_nonpnp_remove),
+static struct isa_driver snd_interwave_driver = {
+ .match = snd_interwave_isa_match,
+ .probe = snd_interwave_isa_probe,
+ .remove = __devexit_p(snd_interwave_isa_remove),
/* FIXME: suspend,resume */
.driver = {
.name = INTERWAVE_DRIVER
@@ -869,8 +880,6 @@
};
#ifdef CONFIG_PNP
-static unsigned int __devinitdata interwave_pnp_devices;
-
static int __devinit snd_interwave_pnp_detect(struct pnp_card_link *pcard,
const struct pnp_card_device_id *pid)
{
@@ -900,7 +909,6 @@
}
pnp_set_card_drvdata(pcard, card);
dev++;
- interwave_pnp_devices++;
return 0;
}
@@ -921,64 +929,29 @@
#endif /* CONFIG_PNP */
-static void __init_or_module snd_interwave_unregister_all(void)
-{
- int i;
-
- if (pnp_registered)
- pnp_unregister_card_driver(&interwave_pnpc_driver);
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_interwave_driver);
-}
-
static int __init alsa_card_interwave_init(void)
{
- int i, err, cards = 0;
+ int err;
- if ((err = platform_driver_register(&snd_interwave_driver)) < 0)
+ err = isa_register_driver(&snd_interwave_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
-
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
#ifdef CONFIG_PNP
- if (isapnp[i])
- continue;
-#endif
- device = platform_device_register_simple(INTERWAVE_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- cards++;
- }
-
/* ISA PnP cards */
err = pnp_register_card_driver(&interwave_pnpc_driver);
- if (!err) {
+ if (!err)
pnp_registered = 1;
- cards += interwave_pnp_devices;;
- }
-
- if (!cards) {
-#ifdef MODULE
- printk(KERN_ERR "InterWave soundcard not found or device busy\n");
#endif
- snd_interwave_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_interwave_exit(void)
{
- snd_interwave_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_card_driver(&interwave_pnpc_driver);
+#endif
+ isa_unregister_driver(&snd_interwave_driver);
}
module_init(alsa_card_interwave_init)
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index f3db686..48743eb 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -91,12 +91,10 @@
module_param_array(opl3sa3_ymode, int, NULL, 0444);
MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi.");
-static struct platform_device *platform_devices[SNDRV_CARDS];
#ifdef CONFIG_PNP
static int pnp_registered;
static int pnpc_registered;
#endif
-static unsigned int snd_opl3sa2_devices;
/* control ports */
#define OPL3SA2_PM_CTRL 0x01
@@ -783,7 +781,6 @@
}
pnp_set_drvdata(pdev, card);
dev++;
- snd_opl3sa2_devices++;
return 0;
}
@@ -850,7 +847,6 @@
}
pnp_set_card_drvdata(pcard, card);
dev++;
- snd_opl3sa2_devices++;
return 0;
}
@@ -884,116 +880,95 @@
};
#endif /* CONFIG_PNP */
-static int __devinit snd_opl3sa2_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_opl3sa2_isa_match(struct device *pdev,
+ unsigned int dev)
{
- struct snd_card *card;
- int err;
- int dev = pdev->id;
-
+ if (!enable[dev])
+ return 0;
+#ifdef CONFIG_PNP
+ if (isapnp[dev])
+ return 0;
+#endif
if (port[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR PFX "specify port\n");
- return -EINVAL;
+ return 0;
}
if (wss_port[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR PFX "specify wss_port\n");
- return -EINVAL;
+ return 0;
}
if (fm_port[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR PFX "specify fm_port\n");
- return -EINVAL;
+ return 0;
}
if (midi_port[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR PFX "specify midi_port\n");
- return -EINVAL;
+ return 0;
}
+ return 1;
+}
+
+static int __devinit snd_opl3sa2_isa_probe(struct device *pdev,
+ unsigned int dev)
+{
+ struct snd_card *card;
+ int err;
card = snd_opl3sa2_card_new(dev);
if (! card)
return -ENOMEM;
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_opl3sa2_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
}
-static int __devexit snd_opl3sa2_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_opl3sa2_isa_remove(struct device *devptr,
+ unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_opl3sa2_nonpnp_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_opl3sa2_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
{
- return snd_opl3sa2_suspend(platform_get_drvdata(dev), state);
+ return snd_opl3sa2_suspend(dev_get_drvdata(dev), state);
}
-static int snd_opl3sa2_nonpnp_resume(struct platform_device *dev)
+static int snd_opl3sa2_isa_resume(struct device *dev, unsigned int n)
{
- return snd_opl3sa2_resume(platform_get_drvdata(dev));
+ return snd_opl3sa2_resume(dev_get_drvdata(dev));
}
#endif
-#define OPL3SA2_DRIVER "snd_opl3sa2"
+#define DEV_NAME "opl3sa2"
-static struct platform_driver snd_opl3sa2_nonpnp_driver = {
- .probe = snd_opl3sa2_nonpnp_probe,
- .remove = __devexit( snd_opl3sa2_nonpnp_remove),
+static struct isa_driver snd_opl3sa2_isa_driver = {
+ .match = snd_opl3sa2_isa_match,
+ .probe = snd_opl3sa2_isa_probe,
+ .remove = __devexit( snd_opl3sa2_isa_remove),
#ifdef CONFIG_PM
- .suspend = snd_opl3sa2_nonpnp_suspend,
- .resume = snd_opl3sa2_nonpnp_resume,
+ .suspend = snd_opl3sa2_isa_suspend,
+ .resume = snd_opl3sa2_isa_resume,
#endif
.driver = {
- .name = OPL3SA2_DRIVER
+ .name = DEV_NAME
},
};
-static void __init_or_module snd_opl3sa2_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnpc_registered)
- pnp_unregister_card_driver(&opl3sa2_pnpc_driver);
- if (pnp_registered)
- pnp_unregister_driver(&opl3sa2_pnp_driver);
-#endif
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_opl3sa2_nonpnp_driver);
-}
-
static int __init alsa_card_opl3sa2_init(void)
{
- int i, err;
+ int err;
- if ((err = platform_driver_register(&snd_opl3sa2_nonpnp_driver)) < 0)
+ err = isa_register_driver(&snd_opl3sa2_isa_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
-
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
-#ifdef CONFIG_PNP
- if (isapnp[i])
- continue;
-#endif
- device = platform_device_register_simple(OPL3SA2_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- snd_opl3sa2_devices++;
- }
-
#ifdef CONFIG_PNP
err = pnp_register_driver(&opl3sa2_pnp_driver);
if (!err)
@@ -1002,20 +977,18 @@
if (!err)
pnpc_registered = 1;
#endif
-
- if (!snd_opl3sa2_devices) {
-#ifdef MODULE
- snd_printk(KERN_ERR "Yamaha OPL3-SA soundcard not found or device busy\n");
-#endif
- snd_opl3sa2_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_opl3sa2_exit(void)
{
- snd_opl3sa2_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnpc_registered)
+ pnp_unregister_card_driver(&opl3sa2_pnpc_driver);
+ if (pnp_registered)
+ pnp_unregister_driver(&opl3sa2_pnp_driver);
+#endif
+ isa_unregister_driver(&snd_opl3sa2_isa_driver);
}
module_init(alsa_card_opl3sa2_init)
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 1dd9837..cd29b30 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -25,7 +25,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/ioport.h>
@@ -137,10 +137,6 @@
static void snd_miro_proc_init(struct snd_miro * miro);
-#define DRIVER_NAME "snd-miro"
-
-static struct platform_device *device;
-
static char * snd_opti9xx_names[] = {
"unkown",
"82C928", "82C929",
@@ -558,7 +554,7 @@
return change;
}
-static struct snd_kcontrol_new snd_miro_controls[] = {
+static struct snd_kcontrol_new snd_miro_controls[] __devinitdata = {
MIRO_DOUBLE("Master Playback Volume", 0, ACI_GET_MASTER, ACI_SET_MASTER),
MIRO_DOUBLE("Mic Playback Volume", 1, ACI_GET_MIC, ACI_SET_MIC),
MIRO_DOUBLE("Line Playback Volume", 1, ACI_GET_LINE, ACI_SET_LINE),
@@ -570,7 +566,7 @@
/* Equalizer with seven bands (only PCM20)
from -12dB up to +12dB on each band */
-static struct snd_kcontrol_new snd_miro_eq_controls[] = {
+static struct snd_kcontrol_new snd_miro_eq_controls[] __devinitdata = {
MIRO_DOUBLE("Tone Control - 28 Hz", 0, ACI_GET_EQ1, ACI_SET_EQ1),
MIRO_DOUBLE("Tone Control - 160 Hz", 0, ACI_GET_EQ2, ACI_SET_EQ2),
MIRO_DOUBLE("Tone Control - 400 Hz", 0, ACI_GET_EQ3, ACI_SET_EQ3),
@@ -580,15 +576,15 @@
MIRO_DOUBLE("Tone Control - 16 kHz", 0, ACI_GET_EQ7, ACI_SET_EQ7),
};
-static struct snd_kcontrol_new snd_miro_radio_control[] = {
+static struct snd_kcontrol_new snd_miro_radio_control[] __devinitdata = {
MIRO_DOUBLE("Radio Playback Volume", 0, ACI_GET_LINE1, ACI_SET_LINE1),
};
-static struct snd_kcontrol_new snd_miro_line_control[] = {
+static struct snd_kcontrol_new snd_miro_line_control[] __devinitdata = {
MIRO_DOUBLE("Line Playback Volume", 2, ACI_GET_LINE1, ACI_SET_LINE1),
};
-static struct snd_kcontrol_new snd_miro_preamp_control[] = {
+static struct snd_kcontrol_new snd_miro_preamp_control[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Mic Boost",
@@ -598,7 +594,7 @@
.put = snd_miro_put_preamp,
}};
-static struct snd_kcontrol_new snd_miro_amp_control[] = {
+static struct snd_kcontrol_new snd_miro_amp_control[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Line Boost",
@@ -608,7 +604,7 @@
.put = snd_miro_put_amp,
}};
-static struct snd_kcontrol_new snd_miro_capture_control[] = {
+static struct snd_kcontrol_new snd_miro_capture_control[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "PCM Capture Switch",
@@ -618,7 +614,7 @@
.put = snd_miro_put_capture,
}};
-static unsigned char aci_init_values[][2] __initdata = {
+static unsigned char aci_init_values[][2] __devinitdata = {
{ ACI_SET_MUTE, 0x00 },
{ ACI_SET_POWERAMP, 0x00 },
{ ACI_SET_PREAMP, 0x00 },
@@ -641,7 +637,7 @@
{ ACI_SET_MASTER + 1, 0x20 },
};
-static int __init snd_set_aci_init_values(struct snd_miro *miro)
+static int __devinit snd_set_aci_init_values(struct snd_miro *miro)
{
int idx, error;
@@ -751,7 +747,8 @@
return -1;
}
-static int __init snd_miro_init(struct snd_miro *chip, unsigned short hardware)
+static int __devinit snd_miro_init(struct snd_miro *chip,
+ unsigned short hardware)
{
static int opti9xx_mc_size[] = {7, 7, 10, 10, 2, 2, 2};
@@ -962,7 +959,7 @@
snd_iprintf(buffer, " preamp : 0x%x\n", miro->aci_preamp);
}
-static void __init snd_miro_proc_init(struct snd_miro * miro)
+static void __devinit snd_miro_proc_init(struct snd_miro * miro)
{
struct snd_info_entry *entry;
@@ -974,7 +971,7 @@
* Init
*/
-static int __init snd_miro_configure(struct snd_miro *chip)
+static int __devinit snd_miro_configure(struct snd_miro *chip)
{
unsigned char wss_base_bits;
unsigned char irq_bits;
@@ -1131,7 +1128,8 @@
return 0;
}
-static int __init snd_card_miro_detect(struct snd_card *card, struct snd_miro *chip)
+static int __devinit snd_card_miro_detect(struct snd_card *card,
+ struct snd_miro *chip)
{
int i, err;
unsigned char value;
@@ -1157,7 +1155,8 @@
return -ENODEV;
}
-static int __init snd_card_miro_aci_detect(struct snd_card *card, struct snd_miro * miro)
+static int __devinit snd_card_miro_aci_detect(struct snd_card *card,
+ struct snd_miro * miro)
{
unsigned char regval;
int i;
@@ -1213,7 +1212,12 @@
release_and_free_resource(miro->res_mc_base);
}
-static int __init snd_miro_probe(struct platform_device *devptr)
+static int __devinit snd_miro_match(struct device *devptr, unsigned int n)
+{
+ return 1;
+}
+
+static int __devinit snd_miro_probe(struct device *devptr, unsigned int n)
{
static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
static long possible_mpu_ports[] = {0x330, 0x300, 0x310, 0x320, -1};
@@ -1399,56 +1403,44 @@
return error;
}
- snd_card_set_dev(card, &devptr->dev);
+ snd_card_set_dev(card, devptr);
if ((error = snd_card_register(card))) {
snd_card_free(card);
return error;
}
- platform_set_drvdata(devptr, card);
+ dev_set_drvdata(devptr, card);
return 0;
}
-static int __devexit snd_miro_remove(struct platform_device *devptr)
+static int __devexit snd_miro_remove(struct device *devptr, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
-static struct platform_driver snd_miro_driver = {
+#define DEV_NAME "miro"
+
+static struct isa_driver snd_miro_driver = {
+ .match = snd_miro_match,
.probe = snd_miro_probe,
.remove = __devexit_p(snd_miro_remove),
/* FIXME: suspend/resume */
.driver = {
- .name = DRIVER_NAME
+ .name = DEV_NAME
},
};
static int __init alsa_card_miro_init(void)
{
- int error;
-
- if ((error = platform_driver_register(&snd_miro_driver)) < 0)
- return error;
- device = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
- if (! IS_ERR(device)) {
- if (platform_get_drvdata(device))
- return 0;
- platform_device_unregister(device);
- }
-#ifdef MODULE
- printk(KERN_ERR "no miro soundcard found\n");
-#endif
- platform_driver_unregister(&snd_miro_driver);
- return PTR_ERR(device);
+ return isa_register_driver(&snd_miro_driver, 1);
}
static void __exit alsa_card_miro_exit(void)
{
- platform_device_unregister(device);
- platform_driver_unregister(&snd_miro_driver);
+ isa_unregister_driver(&snd_miro_driver);
}
module_init(alsa_card_miro_init)
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index df22737..60c120f 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -26,7 +26,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pnp.h>
@@ -259,7 +259,6 @@
};
static int snd_opti9xx_pnp_is_probed;
-static struct platform_device *snd_opti9xx_platform_device;
#ifdef CONFIG_PNP
@@ -281,10 +280,10 @@
#endif /* CONFIG_PNP */
#ifdef OPTi93X
-#define DRIVER_NAME "snd-card-opti93x"
+#define DEV_NAME "opti93x"
#else
-#define DRIVER_NAME "snd-card-opti92x"
-#endif /* OPTi93X */
+#define DEV_NAME "opti92x"
+#endif
static char * snd_opti9xx_names[] = {
"unkown",
@@ -294,7 +293,7 @@
};
-static long __init snd_legacy_find_free_ioport(long *port_table, long size)
+static long __devinit snd_legacy_find_free_ioport(long *port_table, long size)
{
while (*port_table != -1) {
if (request_region(*port_table, size, "ALSA test")) {
@@ -306,7 +305,8 @@
return -1;
}
-static int __init snd_opti9xx_init(struct snd_opti9xx *chip, unsigned short hardware)
+static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
+ unsigned short hardware)
{
static int opti9xx_mc_size[] = {7, 7, 10, 10, 2, 2, 2};
@@ -451,7 +451,7 @@
(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
-static int __init snd_opti9xx_configure(struct snd_opti9xx *chip)
+static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
{
unsigned char wss_base_bits;
unsigned char irq_bits;
@@ -934,10 +934,8 @@
case SNDRV_PCM_TRIGGER_STOP:
{
unsigned int what = 0;
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == chip->playback_substream) {
what |= OPTi93X_PLAYBACK_ENABLE;
snd_pcm_trigger_done(s, substream);
@@ -1291,7 +1289,7 @@
}
codec->dma2 = chip->dma2;
- if (request_irq(chip->irq, snd_opti93x_interrupt, IRQF_DISABLED, DRIVER_NAME" - WSS", codec)) {
+ if (request_irq(chip->irq, snd_opti93x_interrupt, IRQF_DISABLED, DEV_NAME" - WSS", codec)) {
snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq);
snd_opti93x_free(codec);
return -EBUSY;
@@ -1561,7 +1559,7 @@
return change;
}
-static struct snd_kcontrol_new snd_opti93x_controls[] = {
+static struct snd_kcontrol_new snd_opti93x_controls[] __devinitdata = {
OPTi93X_DOUBLE("Master Playback Switch", 0, OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1),
OPTi93X_DOUBLE("Master Playback Volume", 0, OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1),
OPTi93X_DOUBLE("PCM Playback Switch", 0, OPTi93X_DAC_LEFT, OPTi93X_DAC_RIGHT, 7, 7, 1, 1),
@@ -1622,7 +1620,8 @@
#endif /* OPTi93X */
-static int __init snd_card_opti9xx_detect(struct snd_card *card, struct snd_opti9xx *chip)
+static int __devinit snd_card_opti9xx_detect(struct snd_card *card,
+ struct snd_opti9xx *chip)
{
int i, err;
@@ -1676,8 +1675,9 @@
}
#ifdef CONFIG_PNP
-static int __init snd_card_opti9xx_pnp(struct snd_opti9xx *chip, struct pnp_card_link *card,
- const struct pnp_card_device_id *pid)
+static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
+ struct pnp_card_link *card,
+ const struct pnp_card_device_id *pid)
{
struct pnp_dev *pdev;
struct pnp_resource_table *cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
@@ -1778,7 +1778,7 @@
release_and_free_resource(chip->res_mc_base);
}
-static int __init snd_opti9xx_probe(struct snd_card *card)
+static int __devinit snd_opti9xx_probe(struct snd_card *card)
{
static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
int error;
@@ -1924,7 +1924,18 @@
return card;
}
-static int __init snd_opti9xx_nonpnp_probe(struct platform_device *devptr)
+static int __devinit snd_opti9xx_isa_match(struct device *devptr,
+ unsigned int dev)
+{
+ if (snd_opti9xx_pnp_is_probed)
+ return 0;
+ if (isapnp)
+ return 0;
+ return 1;
+}
+
+static int __devinit snd_opti9xx_isa_probe(struct device *devptr,
+ unsigned int dev)
{
struct snd_card *card;
int error;
@@ -1940,9 +1951,6 @@
static int possible_dma2s[][2] = {{1,-1}, {0,-1}, {-1,-1}, {0,-1}};
#endif /* CS4231 || OPTi93X */
- if (snd_opti9xx_pnp_is_probed)
- return -EBUSY;
-
if (mpu_port == SNDRV_AUTO_PORT) {
if ((mpu_port = snd_legacy_find_free_ioport(possible_mpu_ports, 2)) < 0) {
snd_printk(KERN_ERR "unable to find a free MPU401 port\n");
@@ -1984,34 +1992,36 @@
snd_card_free(card);
return error;
}
- snd_card_set_dev(card, &devptr->dev);
+ snd_card_set_dev(card, devptr);
if ((error = snd_opti9xx_probe(card)) < 0) {
snd_card_free(card);
return error;
}
- platform_set_drvdata(devptr, card);
+ dev_set_drvdata(devptr, card);
return 0;
}
-static int __devexit snd_opti9xx_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_opti9xx_isa_remove(struct device *devptr,
+ unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
-static struct platform_driver snd_opti9xx_driver = {
- .probe = snd_opti9xx_nonpnp_probe,
- .remove = __devexit_p(snd_opti9xx_nonpnp_remove),
+static struct isa_driver snd_opti9xx_driver = {
+ .match = snd_opti9xx_isa_match,
+ .probe = snd_opti9xx_isa_probe,
+ .remove = __devexit_p(snd_opti9xx_isa_remove),
/* FIXME: suspend/resume */
.driver = {
- .name = DRIVER_NAME
+ .name = DEV_NAME
},
};
#ifdef CONFIG_PNP
-static int __init snd_opti9xx_pnp_probe(struct pnp_card_link *pcard,
- const struct pnp_card_device_id *pid)
+static int __devinit snd_opti9xx_pnp_probe(struct pnp_card_link *pcard,
+ const struct pnp_card_device_id *pid)
{
struct snd_card *card;
int error, hw;
@@ -2074,11 +2084,6 @@
};
#endif
-#ifdef CONFIG_PNP
-#define is_isapnp_selected() isapnp
-#else
-#define is_isapnp_selected() 0
-#endif
#ifdef OPTi93X
#define CHIP_NAME "82C93x"
#else
@@ -2087,42 +2092,19 @@
static int __init alsa_card_opti9xx_init(void)
{
- int error;
- struct platform_device *device;
-
#ifdef CONFIG_PNP
pnp_register_card_driver(&opti9xx_pnpc_driver);
if (snd_opti9xx_pnp_is_probed)
return 0;
#endif
- if (! is_isapnp_selected()) {
- error = platform_driver_register(&snd_opti9xx_driver);
- if (error < 0)
- return error;
- device = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
- if (!IS_ERR(device)) {
- if (platform_get_drvdata(device)) {
- snd_opti9xx_platform_device = device;
- return 0;
- }
- platform_device_unregister(device);
- }
- platform_driver_unregister(&snd_opti9xx_driver);
- }
-#ifdef CONFIG_PNP
- pnp_unregister_card_driver(&opti9xx_pnpc_driver);
-#endif
-#ifdef MODULE
- printk(KERN_ERR "no OPTi " CHIP_NAME " soundcard found\n");
-#endif
- return -ENODEV;
+ return isa_register_driver(&snd_opti9xx_driver, 1);
}
static void __exit alsa_card_opti9xx_exit(void)
{
if (!snd_opti9xx_pnp_is_probed) {
- platform_device_unregister(snd_opti9xx_platform_device);
- platform_driver_unregister(&snd_opti9xx_driver);
+ isa_unregister_driver(&snd_opti9xx_driver);
+ return;
}
#ifdef CONFIG_PNP
pnp_unregister_card_driver(&opti9xx_pnpc_driver);
diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c
index d64e67f..2a19b0a 100644
--- a/sound/isa/sb/sb16.c
+++ b/sound/isa/sb/sb16.c
@@ -25,7 +25,7 @@
#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/sb.h>
@@ -128,7 +128,6 @@
MODULE_PARM_DESC(seq_ports, "Number of sequencer ports for WaveTable synth.");
#endif
-static struct platform_device *platform_devices[SNDRV_CARDS];
#ifdef CONFIG_PNP
static int pnp_registered;
#endif
@@ -519,7 +518,7 @@
}
#endif
-static int __devinit snd_sb16_nonpnp_probe1(int dev, struct platform_device *devptr)
+static int __devinit snd_sb16_isa_probe1(int dev, struct device *pdev)
{
struct snd_card_sb16 *acard;
struct snd_card *card;
@@ -539,19 +538,23 @@
awe_port[dev] = port[dev] + 0x400;
#endif
- snd_card_set_dev(card, &devptr->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_sb16_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(devptr, card);
+ dev_set_drvdata(pdev, card);
return 0;
}
-static int __devinit snd_sb16_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_sb16_isa_match(struct device *pdev, unsigned int dev)
{
- int dev = pdev->id;
+ return enable[dev] && !is_isapnp_selected(dev);
+}
+
+static int __devinit snd_sb16_isa_probe(struct device *pdev, unsigned int dev)
+{
int err;
static int possible_irqs[] = {5, 9, 10, 7, -1};
static int possible_dmas8[] = {1, 3, 0, -1};
@@ -577,13 +580,13 @@
}
if (port[dev] != SNDRV_AUTO_PORT)
- return snd_sb16_nonpnp_probe1(dev, pdev);
+ return snd_sb16_isa_probe1(dev, pdev);
else {
static int possible_ports[] = {0x220, 0x240, 0x260, 0x280};
int i;
for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
port[dev] = possible_ports[i];
- err = snd_sb16_nonpnp_probe1(dev, pdev);
+ err = snd_sb16_isa_probe1(dev, pdev);
if (! err)
return 0;
}
@@ -591,47 +594,47 @@
}
}
-static int __devexit snd_sb16_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_sb16_isa_remove(struct device *pdev, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(pdev));
+ dev_set_drvdata(pdev, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_sb16_nonpnp_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_sb16_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
{
- return snd_sb16_suspend(platform_get_drvdata(dev), state);
+ return snd_sb16_suspend(dev_get_drvdata(dev), state);
}
-static int snd_sb16_nonpnp_resume(struct platform_device *dev)
+static int snd_sb16_isa_resume(struct device *dev, unsigned int n)
{
- return snd_sb16_resume(platform_get_drvdata(dev));
+ return snd_sb16_resume(dev_get_drvdata(dev));
}
#endif
#ifdef SNDRV_SBAWE
-#define SND_SB16_DRIVER "snd_sbawe"
+#define DEV_NAME "sbawe"
#else
-#define SND_SB16_DRIVER "snd_sb16"
+#define DEV_NAME "sb16"
#endif
-static struct platform_driver snd_sb16_nonpnp_driver = {
- .probe = snd_sb16_nonpnp_probe,
- .remove = __devexit_p(snd_sb16_nonpnp_remove),
+static struct isa_driver snd_sb16_isa_driver = {
+ .match = snd_sb16_isa_match,
+ .probe = snd_sb16_isa_probe,
+ .remove = __devexit_p(snd_sb16_isa_remove),
#ifdef CONFIG_PM
- .suspend = snd_sb16_nonpnp_suspend,
- .resume = snd_sb16_nonpnp_resume,
+ .suspend = snd_sb16_isa_suspend,
+ .resume = snd_sb16_isa_resume,
#endif
.driver = {
- .name = SND_SB16_DRIVER
+ .name = DEV_NAME
},
};
#ifdef CONFIG_PNP
-static unsigned int __devinitdata sb16_pnp_devices;
-
static int __devinit snd_sb16_pnp_detect(struct pnp_card_link *pcard,
const struct pnp_card_device_id *pid)
{
@@ -653,7 +656,6 @@
}
pnp_set_card_drvdata(pcard, card);
dev++;
- sb16_pnp_devices++;
return 0;
}
@@ -695,68 +697,29 @@
#endif /* CONFIG_PNP */
-static void __init_or_module snd_sb16_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnp_registered)
- pnp_unregister_card_driver(&sb16_pnpc_driver);
-#endif
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_sb16_nonpnp_driver);
-}
-
static int __init alsa_card_sb16_init(void)
{
- int i, err, cards = 0;
+ int err;
- if ((err = platform_driver_register(&snd_sb16_nonpnp_driver)) < 0)
+ err = isa_register_driver(&snd_sb16_isa_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
-
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i] || is_isapnp_selected(i))
- continue;
- device = platform_device_register_simple(SND_SB16_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- cards++;
- }
#ifdef CONFIG_PNP
/* PnP cards at last */
err = pnp_register_card_driver(&sb16_pnpc_driver);
- if (!err) {
+ if (!err)
pnp_registered = 1;
- cards += sb16_pnp_devices;
- }
#endif
-
- if (!cards) {
-#ifdef MODULE
- snd_printk(KERN_ERR "Sound Blaster 16 soundcard not found or device busy\n");
-#ifdef SNDRV_SBAWE_EMU8000
- snd_printk(KERN_ERR "In case, if you have non-AWE card, try snd-sb16 module\n");
-#else
- snd_printk(KERN_ERR "In case, if you have AWE card, try snd-sbawe module\n");
-#endif
-#endif
- snd_sb16_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_sb16_exit(void)
{
- snd_sb16_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_card_driver(&sb16_pnpc_driver);
+#endif
+ isa_unregister_driver(&snd_sb16_isa_driver);
}
module_init(alsa_card_sb16_init)
diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 3d9d7e0..b279f23 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -36,6 +36,13 @@
MODULE_AUTHOR("Uros Bizjak <uros@kss-loka.si>");
MODULE_DESCRIPTION("ALSA driver for SB16 Creative Signal Processor");
MODULE_LICENSE("GPL");
+#ifndef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL
+MODULE_FIRMWARE("sb16/mulaw_main.csp");
+MODULE_FIRMWARE("sb16/alaw_main.csp");
+MODULE_FIRMWARE("sb16/ima_adpcm_init.csp");
+MODULE_FIRMWARE("sb16/ima_adpcm_playback.csp");
+MODULE_FIRMWARE("sb16/ima_adpcm_capture.csp");
+#endif
#ifdef SNDRV_LITTLE_ENDIAN
#define CSP_HDR_VALUE(a,b,c,d) ((a) | ((b)<<8) | ((c)<<16) | ((d)<<24))
@@ -161,13 +168,17 @@
*/
static void snd_sb_csp_free(struct snd_hwdep *hwdep)
{
+#ifndef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL
int i;
+#endif
struct snd_sb_csp *p = hwdep->private_data;
if (p) {
if (p->running & SNDRV_SB_CSP_ST_RUNNING)
snd_sb_csp_stop(p);
+#ifndef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL
for (i = 0; i < ARRAY_SIZE(p->csp_programs); ++i)
release_firmware(p->csp_programs[i]);
+#endif
kfree(p);
}
}
@@ -690,9 +701,7 @@
return err;
}
-#define FIRMWARE_IN_THE_KERNEL
-
-#ifdef FIRMWARE_IN_THE_KERNEL
+#ifdef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL
#include "sb16_csp_codecs.h"
static const struct firmware snd_sb_csp_static_programs[] = {
@@ -714,22 +723,19 @@
"sb16/ima_adpcm_capture.csp",
};
const struct firmware *program;
- int err;
BUILD_BUG_ON(ARRAY_SIZE(names) != CSP_PROGRAM_COUNT);
program = p->csp_programs[index];
if (!program) {
- err = request_firmware(&program, names[index],
- p->chip->card->dev);
- if (err >= 0)
- p->csp_programs[index] = program;
- else {
-#ifdef FIRMWARE_IN_THE_KERNEL
- program = &snd_sb_csp_static_programs[index];
+#ifdef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL
+ program = &snd_sb_csp_static_programs[index];
#else
+ int err = request_firmware(&program, names[index],
+ p->chip->card->dev);
+ if (err < 0)
return err;
#endif
- }
+ p->csp_programs[index] = program;
}
return snd_sb_csp_load(p, program->data, program->size, flags);
}
diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c
index be1e83e..a1b3786 100644
--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -22,7 +22,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
@@ -56,8 +56,6 @@
module_param_array(dma8, int, NULL, 0444);
MODULE_PARM_DESC(dma8, "8-bit DMA # for SB8 driver.");
-static struct platform_device *devices[SNDRV_CARDS];
-
struct snd_sb8 {
struct resource *fm_res; /* used to block FM i/o region for legacy cards */
struct snd_sb *chip;
@@ -83,9 +81,23 @@
release_and_free_resource(acard->fm_res);
}
-static int __devinit snd_sb8_probe(struct platform_device *pdev)
+static int __devinit snd_sb8_match(struct device *pdev, unsigned int dev)
{
- int dev = pdev->id;
+ if (!enable[dev])
+ return 0;
+ if (irq[dev] == SNDRV_AUTO_IRQ) {
+ snd_printk(KERN_ERR "%s: please specify irq\n", pdev->bus_id);
+ return 0;
+ }
+ if (dma8[dev] == SNDRV_AUTO_DMA) {
+ snd_printk(KERN_ERR "%s: please specify dma8\n", pdev->bus_id);
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_sb8_probe(struct device *pdev, unsigned int dev)
+{
struct snd_sb *chip;
struct snd_card *card;
struct snd_sb8 *acard;
@@ -180,12 +192,12 @@
chip->port,
irq[dev], dma8[dev]);
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_card_register(card)) < 0)
goto _err;
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
_err:
@@ -193,17 +205,18 @@
return err;
}
-static int __devexit snd_sb8_remove(struct platform_device *pdev)
+static int __devexit snd_sb8_remove(struct device *pdev, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(pdev));
- platform_set_drvdata(pdev, NULL);
+ snd_card_free(dev_get_drvdata(pdev));
+ dev_set_drvdata(pdev, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_sb8_suspend(struct platform_device *dev, pm_message_t state)
+static int snd_sb8_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
{
- struct snd_card *card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_sb8 *acard = card->private_data;
struct snd_sb *chip = acard->chip;
@@ -213,9 +226,9 @@
return 0;
}
-static int snd_sb8_resume(struct platform_device *dev)
+static int snd_sb8_resume(struct device *dev, unsigned int n)
{
- struct snd_card *card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
struct snd_sb8 *acard = card->private_data;
struct snd_sb *chip = acard->chip;
@@ -226,9 +239,10 @@
}
#endif
-#define SND_SB8_DRIVER "snd_sb8"
+#define DEV_NAME "sb8"
-static struct platform_driver snd_sb8_driver = {
+static struct isa_driver snd_sb8_driver = {
+ .match = snd_sb8_match,
.probe = snd_sb8_probe,
.remove = __devexit_p(snd_sb8_remove),
#ifdef CONFIG_PM
@@ -236,56 +250,18 @@
.resume = snd_sb8_resume,
#endif
.driver = {
- .name = SND_SB8_DRIVER
+ .name = DEV_NAME
},
};
-static void __init_or_module snd_sb8_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_sb8_driver);
-}
-
static int __init alsa_card_sb8_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_sb8_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(SND_SB8_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- snd_printk(KERN_ERR "Sound Blaster soundcard not found or device busy\n");
-#endif
- snd_sb8_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_sb8_driver, SNDRV_CARDS);
}
static void __exit alsa_card_sb8_exit(void)
{
- snd_sb8_unregister_all();
+ isa_unregister_driver(&snd_sb8_driver);
}
module_init(alsa_card_sb8_init)
diff --git a/sound/isa/sgalaxy.c b/sound/isa/sgalaxy.c
index 4fcd0f4..922519d 100644
--- a/sound/isa/sgalaxy.c
+++ b/sound/isa/sgalaxy.c
@@ -24,7 +24,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/interrupt.h>
@@ -64,8 +64,6 @@
module_param_array(dma1, int, NULL, 0444);
MODULE_PARM_DESC(dma1, "DMA1 # for Sound Galaxy driver.");
-static struct platform_device *devices[SNDRV_CARDS];
-
#define SGALAXY_AUXC_LEFT 18
#define SGALAXY_AUXC_RIGHT 19
@@ -96,7 +94,8 @@
return 0;
}
-static int __init snd_sgalaxy_sbdsp_command(unsigned long port, unsigned char val)
+static int __devinit snd_sgalaxy_sbdsp_command(unsigned long port,
+ unsigned char val)
{
int i;
@@ -114,7 +113,7 @@
return IRQ_NONE;
}
-static int __init snd_sgalaxy_setup_wss(unsigned long port, int irq, int dma)
+static int __devinit snd_sgalaxy_setup_wss(unsigned long port, int irq, int dma)
{
static int interrupt_bits[] = {-1, -1, -1, -1, -1, -1, -1, 0x08, -1,
0x10, 0x18, 0x20, -1, -1, -1, -1};
@@ -161,7 +160,7 @@
return 0;
}
-static int __init snd_sgalaxy_detect(int dev, int irq, int dma)
+static int __devinit snd_sgalaxy_detect(int dev, int irq, int dma)
{
#if 0
snd_printdd(PFX "switching to WSS mode\n");
@@ -182,7 +181,7 @@
AD1848_DOUBLE("Aux Playback Volume", 0, SGALAXY_AUXC_LEFT, SGALAXY_AUXC_RIGHT, 0, 0, 31, 0)
};
-static int __init snd_sgalaxy_mixer(struct snd_ad1848 *chip)
+static int __devinit snd_sgalaxy_mixer(struct snd_ad1848 *chip)
{
struct snd_card *card = chip->card;
struct snd_ctl_elem_id id1, id2;
@@ -218,23 +217,29 @@
return 0;
}
-static int __init snd_sgalaxy_probe(struct platform_device *devptr)
+static int __devinit snd_sgalaxy_match(struct device *devptr, unsigned int dev)
{
- int dev = devptr->id;
+ if (!enable[dev])
+ return 0;
+ if (sbport[dev] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR PFX "specify SB port\n");
+ return 0;
+ }
+ if (wssport[dev] == SNDRV_AUTO_PORT) {
+ snd_printk(KERN_ERR PFX "specify WSS port\n");
+ return 0;
+ }
+ return 1;
+}
+
+static int __devinit snd_sgalaxy_probe(struct device *devptr, unsigned int dev)
+{
static int possible_irqs[] = {7, 9, 10, 11, -1};
static int possible_dmas[] = {1, 3, 0, -1};
int err, xirq, xdma1;
struct snd_card *card;
struct snd_ad1848 *chip;
- if (sbport[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR PFX "specify SB port\n");
- return -EINVAL;
- }
- if (wssport[dev] == SNDRV_AUTO_PORT) {
- snd_printk(KERN_ERR PFX "specify WSS port\n");
- return -EINVAL;
- }
card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
if (card == NULL)
return -ENOMEM;
@@ -283,12 +288,12 @@
sprintf(card->longname, "Sound Galaxy at 0x%lx, irq %d, dma %d",
wssport[dev], xirq, xdma1);
- snd_card_set_dev(card, &devptr->dev);
+ snd_card_set_dev(card, devptr);
if ((err = snd_card_register(card)) < 0)
goto _err;
- platform_set_drvdata(devptr, card);
+ dev_set_drvdata(devptr, card);
return 0;
_err:
@@ -296,17 +301,18 @@
return err;
}
-static int __devexit snd_sgalaxy_remove(struct platform_device *devptr)
+static int __devexit snd_sgalaxy_remove(struct device *devptr, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
#ifdef CONFIG_PM
-static int snd_sgalaxy_suspend(struct platform_device *pdev, pm_message_t state)
+static int snd_sgalaxy_suspend(struct device *pdev, unsigned int n,
+ pm_message_t state)
{
- struct snd_card *card = platform_get_drvdata(pdev);
+ struct snd_card *card = dev_get_drvdata(pdev);
struct snd_ad1848 *chip = card->private_data;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
@@ -314,9 +320,9 @@
return 0;
}
-static int snd_sgalaxy_resume(struct platform_device *pdev)
+static int snd_sgalaxy_resume(struct device *pdev, unsigned int n)
{
- struct snd_card *card = platform_get_drvdata(pdev);
+ struct snd_card *card = dev_get_drvdata(pdev);
struct snd_ad1848 *chip = card->private_data;
chip->resume(chip);
@@ -328,9 +334,10 @@
}
#endif
-#define SND_SGALAXY_DRIVER "snd_sgalaxy"
+#define DEV_NAME "sgalaxy"
-static struct platform_driver snd_sgalaxy_driver = {
+static struct isa_driver snd_sgalaxy_driver = {
+ .match = snd_sgalaxy_match,
.probe = snd_sgalaxy_probe,
.remove = __devexit_p(snd_sgalaxy_remove),
#ifdef CONFIG_PM
@@ -338,56 +345,18 @@
.resume = snd_sgalaxy_resume,
#endif
.driver = {
- .name = SND_SGALAXY_DRIVER
+ .name = DEV_NAME
},
};
-static void __init_or_module snd_sgalaxy_unregister_all(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(devices); ++i)
- platform_device_unregister(devices[i]);
- platform_driver_unregister(&snd_sgalaxy_driver);
-}
-
static int __init alsa_card_sgalaxy_init(void)
{
- int i, cards, err;
-
- err = platform_driver_register(&snd_sgalaxy_driver);
- if (err < 0)
- return err;
-
- cards = 0;
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
- device = platform_device_register_simple(SND_SGALAXY_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- devices[i] = device;
- cards++;
- }
- if (!cards) {
-#ifdef MODULE
- snd_printk(KERN_ERR "Sound Galaxy soundcard not found or device busy\n");
-#endif
- snd_sgalaxy_unregister_all();
- return -ENODEV;
- }
- return 0;
+ return isa_register_driver(&snd_sgalaxy_driver, SNDRV_CARDS);
}
static void __exit alsa_card_sgalaxy_exit(void)
{
- snd_sgalaxy_unregister_all();
+ isa_unregister_driver(&snd_sgalaxy_driver);
}
module_init(alsa_card_sgalaxy_init)
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index b1f2582..08c1497 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -24,7 +24,7 @@
#include <sound/driver.h>
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/delay.h>
#include <linux/pnp.h>
#include <linux/spinlock.h>
@@ -68,8 +68,6 @@
module_param_array(dma, int, NULL, 0444);
MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
-static struct platform_device *platform_devices[SNDRV_CARDS];
-
#ifdef CONFIG_PNP
static int pnp_registered;
static struct pnp_card_device_id sscape_pnpids[] = {
@@ -1254,9 +1252,27 @@
}
-static int __devinit snd_sscape_probe(struct platform_device *pdev)
+static int __devinit snd_sscape_match(struct device *pdev, unsigned int i)
{
- int dev = pdev->id;
+ /*
+ * Make sure we were given ALL of the other parameters.
+ */
+ if (port[i] == SNDRV_AUTO_PORT)
+ return 0;
+
+ if (irq[i] == SNDRV_AUTO_IRQ ||
+ mpu_irq[i] == SNDRV_AUTO_IRQ ||
+ dma[i] == SNDRV_AUTO_DMA) {
+ printk(KERN_INFO
+ "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+static int __devinit snd_sscape_probe(struct device *pdev, unsigned int dev)
+{
struct snd_card *card;
int ret;
@@ -1264,30 +1280,31 @@
ret = create_sscape(dev, &card);
if (ret < 0)
return ret;
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((ret = snd_card_register(card)) < 0) {
printk(KERN_ERR "sscape: Failed to register sound card\n");
return ret;
}
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
}
-static int __devexit snd_sscape_remove(struct platform_device *devptr)
+static int __devexit snd_sscape_remove(struct device *devptr, unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
-#define SSCAPE_DRIVER "snd_sscape"
+#define DEV_NAME "sscape"
-static struct platform_driver snd_sscape_driver = {
+static struct isa_driver snd_sscape_driver = {
+ .match = snd_sscape_match,
.probe = snd_sscape_probe,
.remove = __devexit_p(snd_sscape_remove),
/* FIXME: suspend/resume */
.driver = {
- .name = SSCAPE_DRIVER
+ .name = DEV_NAME
},
};
@@ -1386,72 +1403,6 @@
#endif /* CONFIG_PNP */
-static void __init_or_module sscape_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnp_registered)
- pnp_unregister_card_driver(&sscape_pnpc_driver);
-#endif
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_sscape_driver);
-}
-
-static int __init sscape_manual_probe(void)
-{
- struct platform_device *device;
- int i, ret;
-
- ret = platform_driver_register(&snd_sscape_driver);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < SNDRV_CARDS; ++i) {
- /*
- * We do NOT probe for ports.
- * If we're not given a port number for this
- * card then we completely ignore this line
- * of parameters.
- */
- if (port[i] == SNDRV_AUTO_PORT)
- continue;
-
- /*
- * Make sure we were given ALL of the other parameters.
- */
- if (irq[i] == SNDRV_AUTO_IRQ ||
- mpu_irq[i] == SNDRV_AUTO_IRQ ||
- dma[i] == SNDRV_AUTO_DMA) {
- printk(KERN_INFO
- "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n");
- sscape_unregister_all();
- return -ENXIO;
- }
-
- /*
- * This cards looks OK ...
- */
- device = platform_device_register_simple(SSCAPE_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- }
- return 0;
-}
-
-static void sscape_exit(void)
-{
- sscape_unregister_all();
-}
-
-
static int __init sscape_init(void)
{
int ret;
@@ -1462,7 +1413,7 @@
* of allocating cards, because the operator is
* S-P-E-L-L-I-N-G it out for us...
*/
- ret = sscape_manual_probe();
+ ret = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS);
if (ret < 0)
return ret;
#ifdef CONFIG_PNP
@@ -1472,5 +1423,14 @@
return 0;
}
+static void __exit sscape_exit(void)
+{
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_card_driver(&sscape_pnpc_driver);
+#endif
+ isa_unregister_driver(&snd_sscape_driver);
+}
+
module_init(sscape_init);
module_exit(sscape_exit);
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index e2fdd5f..75673f7 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -24,7 +24,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
+#include <linux/isa.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
@@ -40,7 +40,9 @@
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
+#ifdef CONFIG_PNP
static int isapnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
+#endif
static long cs4232_pcm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static int cs4232_pcm_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,11,12,15 */
static long cs4232_mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
@@ -83,8 +85,6 @@
module_param_array(use_cs4232_midi, bool, NULL, 0444);
MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)");
-static struct platform_device *platform_devices[SNDRV_CARDS];
-
#ifdef CONFIG_PNP
static int pnp_registered;
@@ -588,56 +588,67 @@
return snd_card_register(card);
}
-static int __devinit snd_wavefront_nonpnp_probe(struct platform_device *pdev)
+static int __devinit snd_wavefront_isa_match(struct device *pdev,
+ unsigned int dev)
{
- int dev = pdev->id;
- struct snd_card *card;
- int err;
-
+ if (!enable[dev])
+ return 0;
+#ifdef CONFIG_PNP
+ if (isapnp[dev])
+ return 0;
+#endif
if (cs4232_pcm_port[dev] == SNDRV_AUTO_PORT) {
snd_printk("specify CS4232 port\n");
- return -EINVAL;
+ return 0;
}
if (ics2115_port[dev] == SNDRV_AUTO_PORT) {
snd_printk("specify ICS2115 port\n");
- return -ENODEV;
+ return 0;
}
+ return 1;
+}
+
+static int __devinit snd_wavefront_isa_probe(struct device *pdev,
+ unsigned int dev)
+{
+ struct snd_card *card;
+ int err;
card = snd_wavefront_card_new(dev);
if (! card)
return -ENOMEM;
- snd_card_set_dev(card, &pdev->dev);
+ snd_card_set_dev(card, pdev);
if ((err = snd_wavefront_probe(card, dev)) < 0) {
snd_card_free(card);
return err;
}
- platform_set_drvdata(pdev, card);
+ dev_set_drvdata(pdev, card);
return 0;
}
-static int __devexit snd_wavefront_nonpnp_remove(struct platform_device *devptr)
+static int __devexit snd_wavefront_isa_remove(struct device *devptr,
+ unsigned int dev)
{
- snd_card_free(platform_get_drvdata(devptr));
- platform_set_drvdata(devptr, NULL);
+ snd_card_free(dev_get_drvdata(devptr));
+ dev_set_drvdata(devptr, NULL);
return 0;
}
-#define WAVEFRONT_DRIVER "snd_wavefront"
+#define DEV_NAME "wavefront"
-static struct platform_driver snd_wavefront_driver = {
- .probe = snd_wavefront_nonpnp_probe,
- .remove = __devexit_p(snd_wavefront_nonpnp_remove),
+static struct isa_driver snd_wavefront_driver = {
+ .match = snd_wavefront_isa_match,
+ .probe = snd_wavefront_isa_probe,
+ .remove = __devexit_p(snd_wavefront_isa_remove),
/* FIXME: suspend, resume */
.driver = {
- .name = WAVEFRONT_DRIVER
+ .name = DEV_NAME
},
};
#ifdef CONFIG_PNP
-static unsigned int __devinitdata wavefront_pnp_devices;
-
static int __devinit snd_wavefront_pnp_detect(struct pnp_card_link *pcard,
const struct pnp_card_device_id *pid)
{
@@ -670,7 +681,6 @@
pnp_set_card_drvdata(pcard, card);
dev++;
- wavefront_pnp_devices++;
return 0;
}
@@ -691,67 +701,28 @@
#endif /* CONFIG_PNP */
-static void __init_or_module snd_wavefront_unregister_all(void)
-{
- int i;
-
-#ifdef CONFIG_PNP
- if (pnp_registered)
- pnp_unregister_card_driver(&wavefront_pnpc_driver);
-#endif
- for (i = 0; i < ARRAY_SIZE(platform_devices); ++i)
- platform_device_unregister(platform_devices[i]);
- platform_driver_unregister(&snd_wavefront_driver);
-}
-
static int __init alsa_card_wavefront_init(void)
{
- int i, err, cards = 0;
+ int err;
- if ((err = platform_driver_register(&snd_wavefront_driver)) < 0)
+ err = isa_register_driver(&snd_wavefront_driver, SNDRV_CARDS);
+ if (err < 0)
return err;
-
- for (i = 0; i < SNDRV_CARDS; i++) {
- struct platform_device *device;
- if (! enable[i])
- continue;
-#ifdef CONFIG_PNP
- if (isapnp[i])
- continue;
-#endif
- device = platform_device_register_simple(WAVEFRONT_DRIVER,
- i, NULL, 0);
- if (IS_ERR(device))
- continue;
- if (!platform_get_drvdata(device)) {
- platform_device_unregister(device);
- continue;
- }
- platform_devices[i] = device;
- cards++;
- }
-
#ifdef CONFIG_PNP
err = pnp_register_card_driver(&wavefront_pnpc_driver);
- if (!err) {
+ if (!err)
pnp_registered = 1;
- cards += wavefront_pnp_devices;
- }
#endif
-
- if (!cards) {
-#ifdef MODULE
- printk (KERN_ERR "No WaveFront cards found or devices busy\n");
-#endif
- snd_wavefront_unregister_all();
- return -ENODEV;
- }
return 0;
}
static void __exit alsa_card_wavefront_exit(void)
{
- snd_wavefront_unregister_all();
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_card_driver(&wavefront_pnpc_driver);
+#endif
+ isa_unregister_driver(&snd_wavefront_driver);
}
module_init(alsa_card_wavefront_init)
diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index 15331ed..fc95a87 100644
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -35,9 +35,7 @@
#define WAIT_IDLE 0xff
-#define FIRMWARE_IN_THE_KERNEL
-
-#ifdef FIRMWARE_IN_THE_KERNEL
+#ifdef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
#include "yss225.c"
static const struct firmware yss225_registers_firmware = {
.data = (u8 *)yss225_registers,
@@ -258,21 +256,21 @@
{
unsigned int i;
int err;
- const struct firmware *firmware;
+ const struct firmware *firmware = NULL;
if (dev->fx_initialized)
return 0;
+#ifdef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
+ firmware = &yss225_registers_firmware;
+#else
err = request_firmware(&firmware, "yamaha/yss225_registers.bin",
dev->card->dev);
if (err < 0) {
-#ifdef FIRMWARE_IN_THE_KERNEL
- firmware = &yss225_registers_firmware;
-#else
err = -1;
goto out;
-#endif
}
+#endif
for (i = 0; i + 1 < firmware->size; i += 2) {
if (firmware->data[i] >= 8 && firmware->data[i] < 16) {
@@ -295,9 +293,12 @@
err = 0;
out:
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (firmware != &yss225_registers_firmware)
+#ifndef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
+ release_firmware(firmware);
#endif
- release_firmware(firmware);
return err;
}
+
+#ifndef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
+MODULE_FIRMWARE("yamaha/yss225_registers.bin");
+#endif
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 1bcfb3a..61e35ec 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -576,7 +576,7 @@
config SND_KORG1212
tristate "Korg 1212 IO"
depends on SND
- select FW_LOADER
+ select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
select SND_PCM
help
Say Y here to include support for Korg 1212IO soundcards.
@@ -584,10 +584,19 @@
To compile this driver as a module, choose M here: the module
will be called snd-korg1212.
+config SND_KORG1212_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Korg1212 driver"
+ depends on SND_KORG1212
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Korg1212 driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
depends on SND
- select FW_LOADER
+ select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
select SND_AC97_CODEC
help
Say Y here to include support for soundcards based on ESS Maestro 3
@@ -596,6 +605,15 @@
To compile this driver as a module, choose M here: the module
will be called snd-maestro3.
+config SND_MAESTRO3_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for Maestro3 driver"
+ depends on SND_MAESTRO3
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the Maestro3 driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_MIXART
tristate "Digigram miXart"
depends on SND
@@ -737,7 +755,7 @@
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
depends on SND
- select FW_LOADER
+ select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
@@ -748,6 +766,15 @@
To compile this driver as a module, choose M here: the module
will be called snd-ymfpci.
+config SND_YMFPCI_FIRMWARE_IN_KERNEL
+ bool "In-kernel firmware for YMFPCI driver"
+ depends on SND_YMFPCI
+ default y
+ help
+ Say Y here to include the static firmware built in the kernel
+ for the YMFPCI driver. If you choose N here, you need to
+ install the firmware files from the alsa-firmware package.
+
config SND_AC97_POWER_SAVE
bool "AC97 Power-Saving Mode"
depends on SND_AC97_CODEC && EXPERIMENTAL
diff --git a/sound/pci/ac97/Makefile b/sound/pci/ac97/Makefile
index 3c32221..f5d4718 100644
--- a/sound/pci/ac97/Makefile
+++ b/sound/pci/ac97/Makefile
@@ -3,7 +3,7 @@
# Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
#
-snd-ac97-codec-objs := ac97_codec.o ac97_pcm.o ac97_patch.o
+snd-ac97-codec-objs := ac97_codec.o ac97_pcm.o
ifneq ($(CONFIG_PROC_FS),)
snd-ac97-codec-objs += ac97_proc.o
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 3bfb210..bbed644 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -35,9 +35,9 @@
#include <sound/ac97_codec.h>
#include <sound/asoundef.h>
#include <sound/initval.h>
-#include "ac97_local.h"
#include "ac97_id.h"
-#include "ac97_patch.h"
+
+#include "ac97_patch.c"
MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>");
MODULE_DESCRIPTION("Universal interface for Audio Codec '97");
@@ -432,7 +432,8 @@
* Controls
*/
-int snd_ac97_info_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_ac97_info_enum_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
struct ac97_enum *e = (struct ac97_enum *)kcontrol->private_value;
@@ -446,7 +447,8 @@
return 0;
}
-int snd_ac97_get_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_get_enum_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
struct ac97_enum *e = (struct ac97_enum *)kcontrol->private_value;
@@ -462,7 +464,8 @@
return 0;
}
-int snd_ac97_put_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_put_enum_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
struct ac97_enum *e = (struct ac97_enum *)kcontrol->private_value;
@@ -508,7 +511,8 @@
}
/* volume and switch controls */
-int snd_ac97_info_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_ac97_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
int mask = (kcontrol->private_value >> 16) & 0xff;
int shift = (kcontrol->private_value >> 8) & 0x0f;
@@ -521,7 +525,8 @@
return 0;
}
-int snd_ac97_get_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_get_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
int reg = kcontrol->private_value & 0xff;
@@ -544,7 +549,8 @@
return 0;
}
-int snd_ac97_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_put_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
int reg = kcontrol->private_value & 0xff;
@@ -646,7 +652,7 @@
AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
};
-const struct snd_kcontrol_new snd_ac97_controls_3d[2] = {
+static const struct snd_kcontrol_new snd_ac97_controls_3d[2] = {
AC97_SINGLE("3D Control - Center", AC97_3D_CONTROL, 8, 15, 0),
AC97_SINGLE("3D Control - Depth", AC97_3D_CONTROL, 0, 15, 0)
};
@@ -817,7 +823,7 @@
return change;
}
-const struct snd_kcontrol_new snd_ac97_controls_spdif[5] = {
+static const struct snd_kcontrol_new snd_ac97_controls_spdif[5] = {
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -1097,7 +1103,7 @@
}
}
-int snd_ac97_try_bit(struct snd_ac97 * ac97, int reg, int bit)
+static int snd_ac97_try_bit(struct snd_ac97 * ac97, int reg, int bit)
{
unsigned short mask, val, orig, res;
@@ -1137,7 +1143,8 @@
return x;
}
-struct snd_kcontrol *snd_ac97_cnew(const struct snd_kcontrol_new *_template, struct snd_ac97 * ac97)
+static struct snd_kcontrol *snd_ac97_cnew(const struct snd_kcontrol_new *_template,
+ struct snd_ac97 * ac97)
{
struct snd_kcontrol_new template;
memcpy(&template, _template, sizeof(template));
@@ -2544,7 +2551,8 @@
}
/* remove the control with the given name and optional suffix */
-int snd_ac97_remove_ctl(struct snd_ac97 *ac97, const char *name, const char *suffix)
+static int snd_ac97_remove_ctl(struct snd_ac97 *ac97, const char *name,
+ const char *suffix)
{
struct snd_ctl_elem_id id;
memset(&id, 0, sizeof(id));
@@ -2563,7 +2571,8 @@
}
/* rename the control with the given name and optional suffix */
-int snd_ac97_rename_ctl(struct snd_ac97 *ac97, const char *src, const char *dst, const char *suffix)
+static int snd_ac97_rename_ctl(struct snd_ac97 *ac97, const char *src,
+ const char *dst, const char *suffix)
{
struct snd_kcontrol *kctl = ctl_find(ac97, src, suffix);
if (kctl) {
@@ -2574,14 +2583,16 @@
}
/* rename both Volume and Switch controls - don't check the return value */
-void snd_ac97_rename_vol_ctl(struct snd_ac97 *ac97, const char *src, const char *dst)
+static void snd_ac97_rename_vol_ctl(struct snd_ac97 *ac97, const char *src,
+ const char *dst)
{
snd_ac97_rename_ctl(ac97, src, dst, "Switch");
snd_ac97_rename_ctl(ac97, src, dst, "Volume");
}
/* swap controls */
-int snd_ac97_swap_ctl(struct snd_ac97 *ac97, const char *s1, const char *s2, const char *suffix)
+static int snd_ac97_swap_ctl(struct snd_ac97 *ac97, const char *s1,
+ const char *s2, const char *suffix)
{
struct snd_kcontrol *kctl1, *kctl2;
kctl1 = ctl_find(ac97, s1, suffix);
diff --git a/sound/pci/ac97/ac97_local.h b/sound/pci/ac97/ac97_local.h
index a6244c7..78745c5 100644
--- a/sound/pci/ac97/ac97_local.h
+++ b/sound/pci/ac97/ac97_local.h
@@ -22,59 +22,8 @@
*
*/
-#define AC97_SINGLE_VALUE(reg,shift,mask,invert) ((reg) | ((shift) << 8) | ((shift) << 12) | ((mask) << 16) | ((invert) << 24))
-#define AC97_PAGE_SINGLE_VALUE(reg,shift,mask,invert,page) (AC97_SINGLE_VALUE(reg,shift,mask,invert) | (1<<25) | ((page) << 26))
-#define AC97_SINGLE(xname, reg, shift, mask, invert) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_ac97_info_volsw, \
- .get = snd_ac97_get_volsw, .put = snd_ac97_put_volsw, \
- .private_value = AC97_SINGLE_VALUE(reg, shift, mask, invert) }
-#define AC97_PAGE_SINGLE(xname, reg, shift, mask, invert, page) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_ac97_info_volsw, \
- .get = snd_ac97_get_volsw, .put = snd_ac97_put_volsw, \
- .private_value = AC97_PAGE_SINGLE_VALUE(reg, shift, mask, invert, page) }
-#define AC97_DOUBLE(xname, reg, shift_left, shift_right, mask, invert) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), .info = snd_ac97_info_volsw, \
- .get = snd_ac97_get_volsw, .put = snd_ac97_put_volsw, \
- .private_value = (reg) | ((shift_left) << 8) | ((shift_right) << 12) | ((mask) << 16) | ((invert) << 24) }
-
-/* enum control */
-struct ac97_enum {
- unsigned char reg;
- unsigned char shift_l;
- unsigned char shift_r;
- unsigned short mask;
- const char **texts;
-};
-
-#define AC97_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xtexts) \
-{ .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
- .mask = xmask, .texts = xtexts }
-#define AC97_ENUM_SINGLE(xreg, xshift, xmask, xtexts) \
- AC97_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xtexts)
-#define AC97_ENUM(xname, xenum) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_ac97_info_enum_double, \
- .get = snd_ac97_get_enum_double, .put = snd_ac97_put_enum_double, \
- .private_value = (unsigned long)&xenum }
-
-/* ac97_codec.c */
-extern const struct snd_kcontrol_new snd_ac97_controls_3d[];
-extern const struct snd_kcontrol_new snd_ac97_controls_spdif[];
-struct snd_kcontrol *snd_ac97_cnew(const struct snd_kcontrol_new *_template, struct snd_ac97 * ac97);
-void snd_ac97_get_name(struct snd_ac97 *ac97, unsigned int id, char *name, int modem);
-int snd_ac97_info_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo);
-int snd_ac97_get_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-int snd_ac97_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-int snd_ac97_try_bit(struct snd_ac97 * ac97, int reg, int bit);
-int snd_ac97_remove_ctl(struct snd_ac97 *ac97, const char *name, const char *suffix);
-int snd_ac97_rename_ctl(struct snd_ac97 *ac97, const char *src, const char *dst, const char *suffix);
-int snd_ac97_swap_ctl(struct snd_ac97 *ac97, const char *s1, const char *s2, const char *suffix);
-void snd_ac97_rename_vol_ctl(struct snd_ac97 *ac97, const char *src, const char *dst);
-void snd_ac97_restore_status(struct snd_ac97 *ac97);
-void snd_ac97_restore_iec958(struct snd_ac97 *ac97);
-int snd_ac97_info_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo);
-int snd_ac97_get_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-int snd_ac97_put_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol);
-
+void snd_ac97_get_name(struct snd_ac97 *ac97, unsigned int id, char *name,
+ int modem);
int snd_ac97_update_bits_nolock(struct snd_ac97 *ac97, unsigned short reg,
unsigned short mask, unsigned short value);
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index b188a4d..3eac0f8 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -23,20 +23,8 @@
*
*/
-#include <sound/driver.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/control.h>
-#include <sound/tlv.h>
-#include <sound/ac97_codec.h>
-#include "ac97_patch.h"
-#include "ac97_id.h"
#include "ac97_local.h"
+#include "ac97_patch.h"
/*
* Chip specific initialization
@@ -390,7 +378,7 @@
.build_post_spdif = patch_yamaha_ymf753_post_spdif
};
-int patch_yamaha_ymf753(struct snd_ac97 * ac97)
+static int patch_yamaha_ymf753(struct snd_ac97 * ac97)
{
/* Patch for Yamaha YMF753, Copyright (c) by David Shust, dshust@shustring.com.
This chip has nonstandard and extended behaviour with regard to its S/PDIF output.
@@ -436,7 +424,7 @@
.build_specific = patch_wolfson_wm9703_specific,
};
-int patch_wolfson03(struct snd_ac97 * ac97)
+static int patch_wolfson03(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_wolfson_wm9703_ops;
return 0;
@@ -467,7 +455,7 @@
.build_specific = patch_wolfson_wm9704_specific,
};
-int patch_wolfson04(struct snd_ac97 * ac97)
+static int patch_wolfson04(struct snd_ac97 * ac97)
{
/* WM9704M/9704Q */
ac97->build_ops = &patch_wolfson_wm9704_ops;
@@ -489,7 +477,7 @@
.build_specific = patch_wolfson_wm9705_specific,
};
-int patch_wolfson05(struct snd_ac97 * ac97)
+static int patch_wolfson05(struct snd_ac97 * ac97)
{
/* WM9705, WM9710 */
ac97->build_ops = &patch_wolfson_wm9705_ops;
@@ -625,7 +613,7 @@
.build_specific = patch_wolfson_wm9711_specific,
};
-int patch_wolfson11(struct snd_ac97 * ac97)
+static int patch_wolfson11(struct snd_ac97 * ac97)
{
/* WM9711, WM9712 */
ac97->build_ops = &patch_wolfson_wm9711_ops;
@@ -824,7 +812,7 @@
#endif
};
-int patch_wolfson13(struct snd_ac97 * ac97)
+static int patch_wolfson13(struct snd_ac97 * ac97)
{
/* WM9713, WM9714 */
ac97->build_ops = &patch_wolfson_wm9713_ops;
@@ -844,7 +832,7 @@
/*
* Tritech codec
*/
-int patch_tritech_tr28028(struct snd_ac97 * ac97)
+static int patch_tritech_tr28028(struct snd_ac97 * ac97)
{
snd_ac97_write_cache(ac97, 0x26, 0x0300);
snd_ac97_write_cache(ac97, 0x26, 0x0000);
@@ -922,7 +910,7 @@
.build_specific = patch_sigmatel_stac97xx_specific
};
-int patch_sigmatel_stac9700(struct snd_ac97 * ac97)
+static int patch_sigmatel_stac9700(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_sigmatel_stac9700_ops;
return 0;
@@ -969,7 +957,7 @@
.build_specific = patch_sigmatel_stac9708_specific
};
-int patch_sigmatel_stac9708(struct snd_ac97 * ac97)
+static int patch_sigmatel_stac9708(struct snd_ac97 * ac97)
{
unsigned int codec72, codec6c;
@@ -995,7 +983,7 @@
return 0;
}
-int patch_sigmatel_stac9721(struct snd_ac97 * ac97)
+static int patch_sigmatel_stac9721(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_sigmatel_stac9700_ops;
if (snd_ac97_read(ac97, AC97_SIGMATEL_ANALOG) == 0) {
@@ -1009,7 +997,7 @@
return 0;
}
-int patch_sigmatel_stac9744(struct snd_ac97 * ac97)
+static int patch_sigmatel_stac9744(struct snd_ac97 * ac97)
{
// patch for SigmaTel
ac97->build_ops = &patch_sigmatel_stac9700_ops;
@@ -1021,7 +1009,7 @@
return 0;
}
-int patch_sigmatel_stac9756(struct snd_ac97 * ac97)
+static int patch_sigmatel_stac9756(struct snd_ac97 * ac97)
{
// patch for SigmaTel
ac97->build_ops = &patch_sigmatel_stac9700_ops;
@@ -1198,7 +1186,7 @@
.build_specific = patch_sigmatel_stac9758_specific
};
-int patch_sigmatel_stac9758(struct snd_ac97 * ac97)
+static int patch_sigmatel_stac9758(struct snd_ac97 * ac97)
{
static unsigned short regs[4] = {
AC97_SIGMATEL_OUTSEL,
@@ -1272,7 +1260,7 @@
.build_spdif = patch_cirrus_build_spdif
};
-int patch_cirrus_spdif(struct snd_ac97 * ac97)
+static int patch_cirrus_spdif(struct snd_ac97 * ac97)
{
/* Basically, the cs4201/cs4205/cs4297a has non-standard sp/dif registers.
WHY CAN'T ANYONE FOLLOW THE BLOODY SPEC? *sigh*
@@ -1293,7 +1281,7 @@
return 0;
}
-int patch_cirrus_cs4299(struct snd_ac97 * ac97)
+static int patch_cirrus_cs4299(struct snd_ac97 * ac97)
{
/* force the detection of PC Beep */
ac97->flags |= AC97_HAS_PC_BEEP;
@@ -1329,7 +1317,7 @@
.build_spdif = patch_conexant_build_spdif
};
-int patch_conexant(struct snd_ac97 * ac97)
+static int patch_conexant(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_conexant_ops;
ac97->flags |= AC97_CX_SPDIF;
@@ -1338,7 +1326,7 @@
return 0;
}
-int patch_cx20551(struct snd_ac97 *ac97)
+static int patch_cx20551(struct snd_ac97 *ac97)
{
snd_ac97_update_bits(ac97, 0x5c, 0x01, 0x01);
return 0;
@@ -1430,7 +1418,7 @@
{ } /* terminator */
};
-int patch_ad1819(struct snd_ac97 * ac97)
+static int patch_ad1819(struct snd_ac97 * ac97)
{
unsigned short scfg;
@@ -1507,7 +1495,7 @@
#endif
};
-int patch_ad1881(struct snd_ac97 * ac97)
+static int patch_ad1881(struct snd_ac97 * ac97)
{
static const char cfg_idxs[3][2] = {
{2, 1},
@@ -1595,7 +1583,7 @@
#endif
};
-int patch_ad1885(struct snd_ac97 * ac97)
+static int patch_ad1885(struct snd_ac97 * ac97)
{
patch_ad1881(ac97);
/* This is required to deal with the Intel D815EEAL2 */
@@ -1622,7 +1610,7 @@
#endif
};
-int patch_ad1886(struct snd_ac97 * ac97)
+static int patch_ad1886(struct snd_ac97 * ac97)
{
patch_ad1881(ac97);
/* Presario700 workaround */
@@ -1844,7 +1832,7 @@
snd_ac97_update_bits(ac97, AC97_AD_JACK_SPDIF, 1<<11, 1<<11);
}
-int patch_ad1981a(struct snd_ac97 *ac97)
+static int patch_ad1981a(struct snd_ac97 *ac97)
{
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1981a_build_ops;
@@ -1877,7 +1865,7 @@
#endif
};
-int patch_ad1981b(struct snd_ac97 *ac97)
+static int patch_ad1981b(struct snd_ac97 *ac97)
{
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1981b_build_ops;
@@ -2014,7 +2002,7 @@
.update_jacks = ad1888_update_jacks,
};
-int patch_ad1888(struct snd_ac97 * ac97)
+static int patch_ad1888(struct snd_ac97 * ac97)
{
unsigned short misc;
@@ -2052,7 +2040,7 @@
.update_jacks = ad1888_update_jacks,
};
-int patch_ad1980(struct snd_ac97 * ac97)
+static int patch_ad1980(struct snd_ac97 * ac97)
{
patch_ad1888(ac97);
ac97->build_ops = &patch_ad1980_build_ops;
@@ -2168,7 +2156,7 @@
.update_jacks = ad1985_update_jacks,
};
-int patch_ad1985(struct snd_ac97 * ac97)
+static int patch_ad1985(struct snd_ac97 * ac97)
{
unsigned short misc;
@@ -2468,7 +2456,7 @@
.update_jacks = ad1986_update_jacks,
};
-int patch_ad1986(struct snd_ac97 * ac97)
+static int patch_ad1986(struct snd_ac97 * ac97)
{
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1986_build_ops;
@@ -2561,7 +2549,7 @@
.update_jacks = alc650_update_jacks
};
-int patch_alc650(struct snd_ac97 * ac97)
+static int patch_alc650(struct snd_ac97 * ac97)
{
unsigned short val;
@@ -2713,7 +2701,7 @@
.update_jacks = alc655_update_jacks
};
-int patch_alc655(struct snd_ac97 * ac97)
+static int patch_alc655(struct snd_ac97 * ac97)
{
unsigned int val;
@@ -2739,6 +2727,7 @@
(ac97->subsystem_device == 0x0131 || /* MSI S270 laptop */
ac97->subsystem_device == 0x0161 || /* LG K1 Express */
ac97->subsystem_device == 0x0351 || /* MSI L725 laptop */
+ ac97->subsystem_device == 0x0471 || /* MSI L720 laptop */
ac97->subsystem_device == 0x0061)) /* MSI S250 laptop */
val &= ~(1 << 1); /* Pin 47 is EAPD (for internal speaker) */
else
@@ -2815,7 +2804,7 @@
.update_jacks = alc850_update_jacks
};
-int patch_alc850(struct snd_ac97 *ac97)
+static int patch_alc850(struct snd_ac97 *ac97)
{
ac97->build_ops = &patch_alc850_ops;
@@ -2875,7 +2864,7 @@
.update_jacks = cm9738_update_jacks
};
-int patch_cm9738(struct snd_ac97 * ac97)
+static int patch_cm9738(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_cm9738_ops;
/* FIXME: can anyone confirm below? */
@@ -2967,7 +2956,7 @@
.update_jacks = cm9739_update_jacks
};
-int patch_cm9739(struct snd_ac97 * ac97)
+static int patch_cm9739(struct snd_ac97 * ac97)
{
unsigned short val;
@@ -3141,7 +3130,7 @@
.update_jacks = cm9761_update_jacks
};
-int patch_cm9761(struct snd_ac97 *ac97)
+static int patch_cm9761(struct snd_ac97 *ac97)
{
unsigned short val;
@@ -3236,7 +3225,7 @@
.build_post_spdif = patch_cm9761_post_spdif /* identical with CM9761 */
};
-int patch_cm9780(struct snd_ac97 *ac97)
+static int patch_cm9780(struct snd_ac97 *ac97)
{
unsigned short val;
@@ -3279,7 +3268,7 @@
.build_specific = patch_vt1616_specific
};
-int patch_vt1616(struct snd_ac97 * ac97)
+static int patch_vt1616(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_vt1616_ops;
return 0;
@@ -3288,16 +3277,111 @@
/*
* VT1617A codec
*/
+
+/*
+ * unfortunately, the vt1617a stashes the twiddlers required for
+ * nooding the i/o jacks on 2 different regs. * thameans that we cant
+ * use the easy way provided by AC97_ENUM_DOUBLE() we have to write
+ * are own funcs.
+ *
+ * NB: this is absolutely and utterly different from the vt1618. dunno
+ * about the 1616.
+ */
+
+/* copied from ac97_surround_jack_mode_info() */
+static int snd_ac97_vt1617a_smart51_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ /* ordering in this list reflects vt1617a docs for Reg 20 and
+ * 7a and Table 6 that lays out the matrix NB WRT Table6: SM51
+ * is SM51EN *AND* it's Bit14, not Bit15 so the table is very
+ * counter-intuitive */
+
+ static const char* texts[] = { "LineIn Mic1", "LineIn Mic1 Mic3",
+ "Surr LFE/C Mic3", "LineIn LFE/C Mic3",
+ "LineIn Mic2", "LineIn Mic2 Mic1",
+ "Surr LFE Mic1", "Surr LFE Mic1 Mic2"};
+ return ac97_enum_text_info(kcontrol, uinfo, texts, 8);
+}
+
+static int snd_ac97_vt1617a_smart51_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ushort usSM51, usMS;
+
+ struct snd_ac97 *pac97;
+
+ pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */
+
+ /* grab our desirec bits, then mash them together in a manner
+ * consistent with Table 6 on page 17 in the 1617a docs */
+
+ usSM51 = snd_ac97_read(pac97, 0x7a) >> 14;
+ usMS = snd_ac97_read(pac97, 0x20) >> 8;
+
+ ucontrol->value.enumerated.item[0] = (usSM51 << 1) + usMS;
+
+ return 0;
+}
+
+static int snd_ac97_vt1617a_smart51_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ushort usSM51, usMS, usReg;
+
+ struct snd_ac97 *pac97;
+
+ pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */
+
+ usSM51 = ucontrol->value.enumerated.item[0] >> 1;
+ usMS = ucontrol->value.enumerated.item[0] & 1;
+
+ /* push our values into the register - consider that things will be left
+ * in a funky state if the write fails */
+
+ usReg = snd_ac97_read(pac97, 0x7a);
+ snd_ac97_write_cache(pac97, 0x7a, (usReg & 0x3FFF) + (usSM51 << 14));
+ usReg = snd_ac97_read(pac97, 0x20);
+ snd_ac97_write_cache(pac97, 0x20, (usReg & 0xFEFF) + (usMS << 8));
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new snd_ac97_controls_vt1617a[] = {
+
+ AC97_SINGLE("Center/LFE Exchange", 0x5a, 8, 1, 0),
+ /*
+ * These are used to enable/disable surround sound on motherboards
+ * that have 3 bidirectional analog jacks
+ */
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Smart 5.1 Select",
+ .info = snd_ac97_vt1617a_smart51_info,
+ .get = snd_ac97_vt1617a_smart51_get,
+ .put = snd_ac97_vt1617a_smart51_put,
+ },
+};
+
int patch_vt1617a(struct snd_ac97 * ac97)
{
- /* bring analog power consumption to normal, like WinXP driver
- * for EPIA SP
+ int err = 0;
+
+ /* we choose to not fail out at this point, but we tell the
+ caller when we return */
+
+ err = patch_build_controls(ac97, &snd_ac97_controls_vt1617a[0],
+ ARRAY_SIZE(snd_ac97_controls_vt1617a));
+
+ /* bring analog power consumption to normal by turning off the
+ * headphone amplifier, like WinXP driver for EPIA SP
*/
snd_ac97_write_cache(ac97, 0x5c, 0x20);
ac97->ext_id |= AC97_EI_SPDIF; /* force the detection of spdif */
ac97->rates[AC97_RATES_SPDIF] = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
ac97->build_ops = &patch_vt1616_ops;
- return 0;
+
+ return err;
}
/*
@@ -3338,7 +3422,7 @@
.update_jacks = it2646_update_jacks
};
-int patch_it2646(struct snd_ac97 * ac97)
+static int patch_it2646(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_it2646_ops;
/* full DAC volume */
@@ -3371,7 +3455,7 @@
.build_specific = patch_si3036_specific,
};
-int mpatch_si3036(struct snd_ac97 * ac97)
+static int mpatch_si3036(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_si3036_ops;
snd_ac97_write_cache(ac97, 0x5c, 0xf210 );
@@ -3403,7 +3487,7 @@
{ } /* terminator */
};
-int patch_lm4550(struct snd_ac97 *ac97)
+static int patch_lm4550(struct snd_ac97 *ac97)
{
ac97->res_table = lm4550_restbl;
return 0;
@@ -3438,7 +3522,7 @@
.build_specific = patch_ucb1400_specific,
};
-int patch_ucb1400(struct snd_ac97 * ac97)
+static int patch_ucb1400(struct snd_ac97 * ac97)
{
ac97->build_ops = &patch_ucb1400_ops;
/* enable headphone driver and smart low power mode by default */
diff --git a/sound/pci/ac97/ac97_patch.h b/sound/pci/ac97/ac97_patch.h
index 555d1c9..fd341ce 100644
--- a/sound/pci/ac97/ac97_patch.h
+++ b/sound/pci/ac97/ac97_patch.h
@@ -22,44 +22,72 @@
*
*/
-int patch_yamaha_ymf753(struct snd_ac97 * ac97);
-int patch_wolfson00(struct snd_ac97 * ac97);
-int patch_wolfson03(struct snd_ac97 * ac97);
-int patch_wolfson04(struct snd_ac97 * ac97);
-int patch_wolfson05(struct snd_ac97 * ac97);
-int patch_wolfson11(struct snd_ac97 * ac97);
-int patch_wolfson13(struct snd_ac97 * ac97);
-int patch_tritech_tr28028(struct snd_ac97 * ac97);
-int patch_sigmatel_stac9700(struct snd_ac97 * ac97);
-int patch_sigmatel_stac9708(struct snd_ac97 * ac97);
-int patch_sigmatel_stac9721(struct snd_ac97 * ac97);
-int patch_sigmatel_stac9744(struct snd_ac97 * ac97);
-int patch_sigmatel_stac9756(struct snd_ac97 * ac97);
-int patch_sigmatel_stac9758(struct snd_ac97 * ac97);
-int patch_cirrus_cs4299(struct snd_ac97 * ac97);
-int patch_cirrus_spdif(struct snd_ac97 * ac97);
-int patch_conexant(struct snd_ac97 * ac97);
-int patch_cx20551(struct snd_ac97 * ac97);
-int patch_ad1819(struct snd_ac97 * ac97);
-int patch_ad1881(struct snd_ac97 * ac97);
-int patch_ad1885(struct snd_ac97 * ac97);
-int patch_ad1886(struct snd_ac97 * ac97);
-int patch_ad1888(struct snd_ac97 * ac97);
-int patch_ad1980(struct snd_ac97 * ac97);
-int patch_ad1981a(struct snd_ac97 * ac97);
-int patch_ad1981b(struct snd_ac97 * ac97);
-int patch_ad1985(struct snd_ac97 * ac97);
-int patch_ad1986(struct snd_ac97 * ac97);
-int patch_alc650(struct snd_ac97 * ac97);
-int patch_alc655(struct snd_ac97 * ac97);
-int patch_alc850(struct snd_ac97 * ac97);
-int patch_cm9738(struct snd_ac97 * ac97);
-int patch_cm9739(struct snd_ac97 * ac97);
-int patch_cm9761(struct snd_ac97 * ac97);
-int patch_cm9780(struct snd_ac97 * ac97);
-int patch_vt1616(struct snd_ac97 * ac97);
-int patch_vt1617a(struct snd_ac97 * ac97);
-int patch_it2646(struct snd_ac97 * ac97);
-int patch_ucb1400(struct snd_ac97 * ac97);
-int mpatch_si3036(struct snd_ac97 * ac97);
-int patch_lm4550(struct snd_ac97 * ac97);
+#define AC97_SINGLE_VALUE(reg,shift,mask,invert) \
+ ((reg) | ((shift) << 8) | ((shift) << 12) | ((mask) << 16) | \
+ ((invert) << 24))
+#define AC97_PAGE_SINGLE_VALUE(reg,shift,mask,invert,page) \
+ (AC97_SINGLE_VALUE(reg,shift,mask,invert) | (1<<25) | ((page) << 26))
+#define AC97_SINGLE(xname, reg, shift, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_ac97_info_volsw, \
+ .get = snd_ac97_get_volsw, .put = snd_ac97_put_volsw, \
+ .private_value = AC97_SINGLE_VALUE(reg, shift, mask, invert) }
+#define AC97_PAGE_SINGLE(xname, reg, shift, mask, invert, page) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_ac97_info_volsw, \
+ .get = snd_ac97_get_volsw, .put = snd_ac97_put_volsw, \
+ .private_value = AC97_PAGE_SINGLE_VALUE(reg, shift, mask, invert, page) }
+#define AC97_DOUBLE(xname, reg, shift_left, shift_right, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .info = snd_ac97_info_volsw, \
+ .get = snd_ac97_get_volsw, .put = snd_ac97_put_volsw, \
+ .private_value = (reg) | ((shift_left) << 8) | ((shift_right) << 12) | ((mask) << 16) | ((invert) << 24) }
+
+/* enum control */
+struct ac97_enum {
+ unsigned char reg;
+ unsigned char shift_l;
+ unsigned char shift_r;
+ unsigned short mask;
+ const char **texts;
+};
+
+#define AC97_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xtexts) \
+{ .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
+ .mask = xmask, .texts = xtexts }
+#define AC97_ENUM_SINGLE(xreg, xshift, xmask, xtexts) \
+ AC97_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xtexts)
+#define AC97_ENUM(xname, xenum) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_ac97_info_enum_double, \
+ .get = snd_ac97_get_enum_double, .put = snd_ac97_put_enum_double, \
+ .private_value = (unsigned long)&xenum }
+
+/* ac97_codec.c */
+static const struct snd_kcontrol_new snd_ac97_controls_3d[];
+static const struct snd_kcontrol_new snd_ac97_controls_spdif[];
+static struct snd_kcontrol *snd_ac97_cnew(const struct snd_kcontrol_new *_template,
+ struct snd_ac97 * ac97);
+static int snd_ac97_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo);
+static int snd_ac97_get_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+static int snd_ac97_put_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+static int snd_ac97_try_bit(struct snd_ac97 * ac97, int reg, int bit);
+static int snd_ac97_remove_ctl(struct snd_ac97 *ac97, const char *name,
+ const char *suffix);
+static int snd_ac97_rename_ctl(struct snd_ac97 *ac97, const char *src,
+ const char *dst, const char *suffix);
+static int snd_ac97_swap_ctl(struct snd_ac97 *ac97, const char *s1,
+ const char *s2, const char *suffix);
+static void snd_ac97_rename_vol_ctl(struct snd_ac97 *ac97, const char *src,
+ const char *dst);
+static void snd_ac97_restore_status(struct snd_ac97 *ac97);
+static void snd_ac97_restore_iec958(struct snd_ac97 *ac97);
+static int snd_ac97_info_enum_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo);
+static int snd_ac97_get_enum_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+static int snd_ac97_put_enum_double(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
diff --git a/sound/pci/ac97/ac97_pcm.c b/sound/pci/ac97/ac97_pcm.c
index 3758d07..4281e6d 100644
--- a/sound/pci/ac97/ac97_pcm.c
+++ b/sound/pci/ac97/ac97_pcm.c
@@ -34,7 +34,6 @@
#include <sound/control.h>
#include <sound/ac97_codec.h>
#include <sound/asoundef.h>
-#include "ac97_patch.h"
#include "ac97_id.h"
#include "ac97_local.h"
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index ba7fa22..e1ed595 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -69,10 +69,10 @@
* Debug part definitions
*/
-//#define ALI_DEBUG
+/* #define ALI_DEBUG */
#ifdef ALI_DEBUG
-#define snd_ali_printk(format, args...) printk(format, ##args);
+#define snd_ali_printk(format, args...) printk(KERN_DEBUG format, ##args);
#else
#define snd_ali_printk(format, args...)
#endif
@@ -105,10 +105,10 @@
* Direct Registers
*/
-#define ALI_LEGACY_DMAR0 0x00 // ADR0
-#define ALI_LEGACY_DMAR4 0x04 // CNT0
-#define ALI_LEGACY_DMAR11 0x0b // MOD
-#define ALI_LEGACY_DMAR15 0x0f // MMR
+#define ALI_LEGACY_DMAR0 0x00 /* ADR0 */
+#define ALI_LEGACY_DMAR4 0x04 /* CNT0 */
+#define ALI_LEGACY_DMAR11 0x0b /* MOD */
+#define ALI_LEGACY_DMAR15 0x0f /* MMR */
#define ALI_MPUR0 0x20
#define ALI_MPUR1 0x21
#define ALI_MPUR2 0x22
@@ -175,7 +175,7 @@
struct snd_ali_voice;
struct snd_ali_channel_control {
- // register data
+ /* register data */
struct REGDATA {
unsigned int start;
unsigned int stop;
@@ -183,7 +183,7 @@
unsigned int ainten;
} data;
- // register addresses
+ /* register addresses */
struct REGS {
unsigned int start;
unsigned int stop;
@@ -197,19 +197,18 @@
struct snd_ali_voice {
unsigned int number;
- unsigned int use: 1,
- pcm: 1,
- midi: 1,
- mode: 1,
- synth: 1;
+ unsigned int use :1,
+ pcm :1,
+ midi :1,
+ mode :1,
+ synth :1,
+ running :1;
/* PCM data */
struct snd_ali *codec;
struct snd_pcm_substream *substream;
struct snd_ali_voice *extra;
- unsigned int running: 1;
-
int eso; /* final ESO value for channel */
int count; /* runtime->period_size */
@@ -231,14 +230,12 @@
};
-#ifdef CONFIG_PM
#define ALI_GLOBAL_REGS 56
#define ALI_CHANNEL_REGS 8
struct snd_ali_image {
- unsigned long regs[ALI_GLOBAL_REGS];
- unsigned long channel_regs[ALI_CHANNELS][ALI_CHANNEL_REGS];
+ u32 regs[ALI_GLOBAL_REGS];
+ u32 channel_regs[ALI_CHANNELS][ALI_CHANNEL_REGS];
};
-#endif
struct snd_ali {
@@ -246,8 +243,8 @@
unsigned long port;
unsigned char revision;
- unsigned int hw_initialized: 1;
- unsigned int spdif_support: 1;
+ unsigned int hw_initialized :1;
+ unsigned int spdif_support :1;
struct pci_dev *pci;
struct pci_dev *pci_m1533;
@@ -287,108 +284,28 @@
static void snd_ali_clear_voices(struct snd_ali *, unsigned int, unsigned int);
static unsigned short snd_ali_codec_peek(struct snd_ali *, int, unsigned short);
-static void snd_ali_codec_poke(struct snd_ali *, int, unsigned short, unsigned short);
-
-/*
- * Debug Part
- */
-
-#ifdef ALI_DEBUG
-
-static void ali_read_regs(struct snd_ali *codec, int channel)
-{
- int i,j;
- unsigned int dwVal;
-
- printk("channel %d registers map:\n", channel);
- outb((unsigned char)(channel & 0x001f), ALI_REG(codec,ALI_GC_CIR));
-
- printk(" ");
- for(j=0;j<8;j++)
- printk("%2.2x ", j*4);
- printk("\n");
-
- for (i=0; i<=0xf8/4;i++) {
- if(i%8 == 0)
- printk("%2.2x ", (i*4/0x10)*0x10);
- dwVal = inl(ALI_REG(codec,i*4));
- printk("%8.8x ", dwVal);
- if ((i+1)%8 == 0)
- printk("\n");
- }
- printk("\n");
-}
-static void ali_read_cfg(unsigned int vendor, unsigned deviceid)
-{
- unsigned int dwVal;
- struct pci_dev *pci_dev;
- int i,j;
-
- pci_dev = pci_get_device(vendor, deviceid, NULL);
- if (pci_dev == NULL)
- return ;
-
- printk("\nM%x PCI CFG\n", deviceid);
- printk(" ");
- for(j=0;j<8;j++)
- printk("%d ",j);
- printk("\n");
-
- for(i=0;i<8;i++) {
- printk("%d ",i);
- for(j=0;j<8;j++)
- {
- pci_read_config_dword(pci_dev, i*0x20+j*4, &dwVal);
- printk("%8.8x ", dwVal);
- }
- printk("\n");
- }
- pci_dev_put(pci_dev);
- }
-static void ali_read_ac97regs(struct snd_ali *codec, int secondary)
-{
- unsigned short i,j;
- unsigned short wVal;
-
- printk("\ncodec %d registers map:\n", secondary);
-
- printk(" ");
- for(j=0;j<8;j++)
- printk("%2.2x ",j*2);
- printk("\n");
-
- for (i=0; i<64;i++) {
- if(i%8 == 0)
- printk("%2.2x ", (i/8)*0x10);
- wVal = snd_ali_codec_peek(codec, secondary, i*2);
- printk("%4.4x ", wVal);
- if ((i+1)%8 == 0)
- printk("\n");
- }
- printk("\n");
-}
-
-#endif
+static void snd_ali_codec_poke(struct snd_ali *, int, unsigned short,
+ unsigned short);
/*
* AC97 ACCESS
*/
static inline unsigned int snd_ali_5451_peek(struct snd_ali *codec,
- unsigned int port )
+ unsigned int port)
{
return (unsigned int)inl(ALI_REG(codec, port));
}
-static inline void snd_ali_5451_poke( struct snd_ali *codec,
- unsigned int port,
- unsigned int val )
+static inline void snd_ali_5451_poke(struct snd_ali *codec,
+ unsigned int port,
+ unsigned int val)
{
outl((unsigned int)val, ALI_REG(codec, port));
}
-static int snd_ali_codec_ready( struct snd_ali *codec,
- unsigned int port )
+static int snd_ali_codec_ready(struct snd_ali *codec,
+ unsigned int port)
{
unsigned long end_time;
unsigned int res;
@@ -396,7 +313,7 @@
end_time = jiffies + msecs_to_jiffies(250);
do {
res = snd_ali_5451_peek(codec,port);
- if (! (res & 0x8000))
+ if (!(res & 0x8000))
return 0;
schedule_timeout_uninterruptible(1);
} while (time_after_eq(end_time, jiffies));
@@ -425,11 +342,11 @@
}
static void snd_ali_codec_poke(struct snd_ali *codec,int secondary,
- unsigned short reg,
- unsigned short val)
+ unsigned short reg,
+ unsigned short val)
{
- unsigned int dwVal = 0;
- unsigned int port = 0;
+ unsigned int dwVal;
+ unsigned int port;
if (reg >= 0x80) {
snd_printk(KERN_ERR "ali_codec_poke: reg(%xh) invalid.\n", reg);
@@ -445,20 +362,22 @@
dwVal = (unsigned int) (reg & 0xff);
dwVal |= 0x8000 | (val << 16);
- if (secondary) dwVal |= 0x0080;
- if (codec->revision == ALI_5451_V02) dwVal |= 0x0100;
+ if (secondary)
+ dwVal |= 0x0080;
+ if (codec->revision == ALI_5451_V02)
+ dwVal |= 0x0100;
- snd_ali_5451_poke(codec,port,dwVal);
+ snd_ali_5451_poke(codec, port, dwVal);
return ;
}
-static unsigned short snd_ali_codec_peek( struct snd_ali *codec,
- int secondary,
- unsigned short reg)
+static unsigned short snd_ali_codec_peek(struct snd_ali *codec,
+ int secondary,
+ unsigned short reg)
{
- unsigned int dwVal = 0;
- unsigned int port = 0;
+ unsigned int dwVal;
+ unsigned int port;
if (reg >= 0x80) {
snd_printk(KERN_ERR "ali_codec_peek: reg(%xh) invalid.\n", reg);
@@ -474,7 +393,8 @@
dwVal = (unsigned int) (reg & 0xff);
dwVal |= 0x8000; /* bit 15*/
- if (secondary) dwVal |= 0x0080;
+ if (secondary)
+ dwVal |= 0x0080;
snd_ali_5451_poke(codec, port, dwVal);
@@ -483,7 +403,7 @@
if (snd_ali_codec_ready(codec, port) < 0)
return ~0;
- return (snd_ali_5451_peek(codec, port) & 0xffff0000)>>16;
+ return (snd_ali_5451_peek(codec, port) & 0xffff0000) >> 16;
}
static void snd_ali_codec_write(struct snd_ac97 *ac97,
@@ -493,9 +413,9 @@
struct snd_ali *codec = ac97->private_data;
snd_ali_printk("codec_write: reg=%xh data=%xh.\n", reg, val);
- if(reg == AC97_GPIO_STATUS) {
- outl((val << ALI_AC97_GPIO_DATA_SHIFT)|ALI_AC97_GPIO_ENABLE,
- ALI_REG(codec, ALI_AC97_GPIO));
+ if (reg == AC97_GPIO_STATUS) {
+ outl((val << ALI_AC97_GPIO_DATA_SHIFT) | ALI_AC97_GPIO_ENABLE,
+ ALI_REG(codec, ALI_AC97_GPIO));
return;
}
snd_ali_codec_poke(codec, ac97->num, reg, val);
@@ -503,12 +423,13 @@
}
-static unsigned short snd_ali_codec_read(struct snd_ac97 *ac97, unsigned short reg)
+static unsigned short snd_ali_codec_read(struct snd_ac97 *ac97,
+ unsigned short reg)
{
struct snd_ali *codec = ac97->private_data;
snd_ali_printk("codec_read reg=%xh.\n", reg);
- return (snd_ali_codec_peek(codec, ac97->num, reg));
+ return snd_ali_codec_peek(codec, ac97->num, reg);
}
/*
@@ -517,11 +438,12 @@
static int snd_ali_reset_5451(struct snd_ali *codec)
{
- struct pci_dev *pci_dev = NULL;
+ struct pci_dev *pci_dev;
unsigned short wCount, wReg;
unsigned int dwVal;
- if ((pci_dev = codec->pci_m1533) != NULL) {
+ pci_dev = codec->pci_m1533;
+ if (pci_dev) {
pci_read_config_dword(pci_dev, 0x7c, &dwVal);
pci_write_config_dword(pci_dev, 0x7c, dwVal | 0x08000000);
udelay(5000);
@@ -541,7 +463,7 @@
wCount = 200;
while(wCount--) {
wReg = snd_ali_codec_peek(codec, 0, AC97_POWERDOWN);
- if((wReg & 0x000f) == 0x000f)
+ if ((wReg & 0x000f) == 0x000f)
return 0;
udelay(5000);
}
@@ -555,8 +477,8 @@
static int snd_ali_reset_codec(struct snd_ali *codec)
{
- struct pci_dev *pci_dev = NULL;
- unsigned char bVal = 0;
+ struct pci_dev *pci_dev;
+ unsigned char bVal;
unsigned int dwVal;
unsigned short wCount, wReg;
@@ -579,9 +501,9 @@
udelay(15000);
wCount = 200;
- while(wCount--) {
+ while (wCount--) {
wReg = snd_ali_codec_read(codec->ac97, AC97_POWERDOWN);
- if((wReg & 0x000f) == 0x000f)
+ if ((wReg & 0x000f) == 0x000f)
return 0;
udelay(5000);
}
@@ -594,25 +516,27 @@
* ALI 5451 Controller
*/
-static void snd_ali_enable_special_channel(struct snd_ali *codec, unsigned int channel)
+static void snd_ali_enable_special_channel(struct snd_ali *codec,
+ unsigned int channel)
{
- unsigned long dwVal = 0;
+ unsigned long dwVal;
- dwVal = inl(ALI_REG(codec,ALI_GLOBAL_CONTROL));
+ dwVal = inl(ALI_REG(codec, ALI_GLOBAL_CONTROL));
dwVal |= 1 << (channel & 0x0000001f);
- outl(dwVal, ALI_REG(codec,ALI_GLOBAL_CONTROL));
+ outl(dwVal, ALI_REG(codec, ALI_GLOBAL_CONTROL));
}
-static void snd_ali_disable_special_channel(struct snd_ali *codec, unsigned int channel)
+static void snd_ali_disable_special_channel(struct snd_ali *codec,
+ unsigned int channel)
{
- unsigned long dwVal = 0;
+ unsigned long dwVal;
- dwVal = inl(ALI_REG(codec,ALI_GLOBAL_CONTROL));
+ dwVal = inl(ALI_REG(codec, ALI_GLOBAL_CONTROL));
dwVal &= ~(1 << (channel & 0x0000001f));
- outl(dwVal, ALI_REG(codec,ALI_GLOBAL_CONTROL));
+ outl(dwVal, ALI_REG(codec, ALI_GLOBAL_CONTROL));
}
-static void snd_ali_enable_address_interrupt(struct snd_ali * codec)
+static void snd_ali_enable_address_interrupt(struct snd_ali *codec)
{
unsigned int gc;
@@ -622,7 +546,7 @@
outl( gc, ALI_REG(codec, ALI_GC_CIR));
}
-static void snd_ali_disable_address_interrupt(struct snd_ali * codec)
+static void snd_ali_disable_address_interrupt(struct snd_ali *codec)
{
unsigned int gc;
@@ -632,8 +556,9 @@
outl(gc, ALI_REG(codec, ALI_GC_CIR));
}
-#if 0 // not used
-static void snd_ali_enable_voice_irq(struct snd_ali *codec, unsigned int channel)
+#if 0 /* not used */
+static void snd_ali_enable_voice_irq(struct snd_ali *codec,
+ unsigned int channel)
{
unsigned int mask;
struct snd_ali_channel_control *pchregs = &(codec->chregs);
@@ -641,13 +566,14 @@
snd_ali_printk("enable_voice_irq channel=%d\n",channel);
mask = 1 << (channel & 0x1f);
- pchregs->data.ainten = inl(ALI_REG(codec,pchregs->regs.ainten));
+ pchregs->data.ainten = inl(ALI_REG(codec, pchregs->regs.ainten));
pchregs->data.ainten |= mask;
- outl(pchregs->data.ainten,ALI_REG(codec,pchregs->regs.ainten));
+ outl(pchregs->data.ainten, ALI_REG(codec, pchregs->regs.ainten));
}
#endif
-static void snd_ali_disable_voice_irq(struct snd_ali *codec, unsigned int channel)
+static void snd_ali_disable_voice_irq(struct snd_ali *codec,
+ unsigned int channel)
{
unsigned int mask;
struct snd_ali_channel_control *pchregs = &(codec->chregs);
@@ -655,9 +581,9 @@
snd_ali_printk("disable_voice_irq channel=%d\n",channel);
mask = 1 << (channel & 0x1f);
- pchregs->data.ainten = inl(ALI_REG(codec,pchregs->regs.ainten));
+ pchregs->data.ainten = inl(ALI_REG(codec, pchregs->regs.ainten));
pchregs->data.ainten &= ~mask;
- outl(pchregs->data.ainten,ALI_REG(codec,pchregs->regs.ainten));
+ outl(pchregs->data.ainten, ALI_REG(codec, pchregs->regs.ainten));
}
static int snd_ali_alloc_pcm_channel(struct snd_ali *codec, int channel)
@@ -665,7 +591,8 @@
unsigned int idx = channel & 0x1f;
if (codec->synth.chcnt >= ALI_CHANNELS){
- snd_printk(KERN_ERR "ali_alloc_pcm_channel: no free channels.\n");
+ snd_printk(KERN_ERR
+ "ali_alloc_pcm_channel: no free channels.\n");
return -1;
}
@@ -685,35 +612,41 @@
snd_ali_printk("find_free_channel: for %s\n",rec ? "rec" : "pcm");
- // recording
+ /* recording */
if (rec) {
if (codec->spdif_support &&
- (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) & ALI_SPDIF_IN_SUPPORT))
+ (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) &
+ ALI_SPDIF_IN_SUPPORT))
idx = ALI_SPDIF_IN_CHANNEL;
else
idx = ALI_PCM_IN_CHANNEL;
- if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0) {
+ result = snd_ali_alloc_pcm_channel(codec, idx);
+ if (result >= 0)
return result;
- } else {
- snd_printk(KERN_ERR "ali_find_free_channel: record channel is busy now.\n");
+ else {
+ snd_printk(KERN_ERR "ali_find_free_channel: "
+ "record channel is busy now.\n");
return -1;
}
}
- //playback...
+ /* playback... */
if (codec->spdif_support &&
- (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) & ALI_SPDIF_OUT_CH_ENABLE)) {
+ (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) &
+ ALI_SPDIF_OUT_CH_ENABLE)) {
idx = ALI_SPDIF_OUT_CHANNEL;
- if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0) {
+ result = snd_ali_alloc_pcm_channel(codec, idx);
+ if (result >= 0)
return result;
- } else {
- snd_printk(KERN_ERR "ali_find_free_channel: S/PDIF out channel is in busy now.\n");
- }
+ else
+ snd_printk(KERN_ERR "ali_find_free_channel: "
+ "S/PDIF out channel is in busy now.\n");
}
for (idx = 0; idx < ALI_CHANNELS; idx++) {
- if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0)
+ result = snd_ali_alloc_pcm_channel(codec, idx);
+ if (result >= 0)
return result;
}
snd_printk(KERN_ERR "ali_find_free_channel: no free channels.\n");
@@ -730,7 +663,8 @@
return;
if (!(codec->synth.chmap & (1 << idx))) {
- snd_printk(KERN_ERR "ali_free_channel_pcm: channel %d is not in use.\n",channel);
+ snd_printk(KERN_ERR "ali_free_channel_pcm: "
+ "channel %d is not in use.\n", channel);
return;
} else {
codec->synth.chmap &= ~(1 << idx);
@@ -738,8 +672,8 @@
}
}
-#if 0 // not used
-static void snd_ali_start_voice(struct snd_ali * codec, unsigned int channel)
+#if 0 /* not used */
+static void snd_ali_start_voice(struct snd_ali *codec, unsigned int channel)
{
unsigned int mask = 1 << (channel & 0x1f);
@@ -748,7 +682,7 @@
}
#endif
-static void snd_ali_stop_voice(struct snd_ali * codec, unsigned int channel)
+static void snd_ali_stop_voice(struct snd_ali *codec, unsigned int channel)
{
unsigned int mask = 1 << (channel & 0x1f);
@@ -768,26 +702,27 @@
currenttimer = inl(ALI_REG(codec, ALI_STIMER));
while (currenttimer < begintimer + interval) {
- if(snd_ali_stimer_ready(codec) < 0)
+ if (snd_ali_stimer_ready(codec) < 0)
break;
currenttimer = inl(ALI_REG(codec, ALI_STIMER));
+ cpu_relax();
}
}
static void snd_ali_detect_spdif_rate(struct snd_ali *codec)
{
- u16 wval = 0;
+ u16 wval;
u16 count = 0;
- u8 bval = 0, R1 = 0, R2 = 0;
+ u8 bval, R1 = 0, R2;
- bval = inb(ALI_REG(codec,ALI_SPDIF_CTRL + 1));
+ bval = inb(ALI_REG(codec, ALI_SPDIF_CTRL + 1));
bval |= 0x1F;
- outb(bval,ALI_REG(codec,ALI_SPDIF_CTRL + 1));
+ outb(bval, ALI_REG(codec, ALI_SPDIF_CTRL + 1));
- while (((R1 < 0x0B )||(R1 > 0x0E)) && (R1 != 0x12) && count <= 50000) {
+ while ((R1 < 0x0b || R1 > 0x0e) && R1 != 0x12 && count <= 50000) {
count ++;
snd_ali_delay(codec, 6);
- bval = inb(ALI_REG(codec,ALI_SPDIF_CTRL + 1));
+ bval = inb(ALI_REG(codec, ALI_SPDIF_CTRL + 1));
R1 = bval & 0x1F;
}
@@ -801,7 +736,10 @@
snd_ali_delay(codec, 6);
bval = inb(ALI_REG(codec,ALI_SPDIF_CTRL + 1));
R2 = bval & 0x1F;
- if (R2 != R1) R1 = R2; else break;
+ if (R2 != R1)
+ R1 = R2;
+ else
+ break;
}
if (count > 50000) {
@@ -810,42 +748,45 @@
}
if (R2 >= 0x0b && R2 <= 0x0e) {
- wval = inw(ALI_REG(codec,ALI_SPDIF_CTRL + 2));
- wval &= 0xE0F0;
- wval |= (u16)0x09 << 8 | (u16)0x05;
- outw(wval,ALI_REG(codec,ALI_SPDIF_CTRL + 2));
+ wval = inw(ALI_REG(codec, ALI_SPDIF_CTRL + 2));
+ wval &= 0xe0f0;
+ wval |= (0x09 << 8) | 0x05;
+ outw(wval, ALI_REG(codec, ALI_SPDIF_CTRL + 2));
- bval = inb(ALI_REG(codec,ALI_SPDIF_CS +3)) & 0xF0;
- outb(bval|0x02,ALI_REG(codec,ALI_SPDIF_CS + 3));
+ bval = inb(ALI_REG(codec, ALI_SPDIF_CS + 3)) & 0xf0;
+ outb(bval | 0x02, ALI_REG(codec, ALI_SPDIF_CS + 3));
} else if (R2 == 0x12) {
- wval = inw(ALI_REG(codec,ALI_SPDIF_CTRL + 2));
- wval &= 0xE0F0;
- wval |= (u16)0x0E << 8 | (u16)0x08;
- outw(wval,ALI_REG(codec,ALI_SPDIF_CTRL + 2));
+ wval = inw(ALI_REG(codec, ALI_SPDIF_CTRL + 2));
+ wval &= 0xe0f0;
+ wval |= (0x0e << 8) | 0x08;
+ outw(wval, ALI_REG(codec, ALI_SPDIF_CTRL + 2));
- bval = inb(ALI_REG(codec,ALI_SPDIF_CS +3)) & 0xF0;
- outb(bval|0x03,ALI_REG(codec,ALI_SPDIF_CS + 3));
+ bval = inb(ALI_REG(codec,ALI_SPDIF_CS + 3)) & 0xf0;
+ outb(bval | 0x03, ALI_REG(codec, ALI_SPDIF_CS + 3));
}
}
static unsigned int snd_ali_get_spdif_in_rate(struct snd_ali *codec)
{
- u32 dwRate = 0;
- u8 bval = 0;
+ u32 dwRate;
+ u8 bval;
- bval = inb(ALI_REG(codec,ALI_SPDIF_CTRL));
- bval &= 0x7F;
+ bval = inb(ALI_REG(codec, ALI_SPDIF_CTRL));
+ bval &= 0x7f;
bval |= 0x40;
- outb(bval, ALI_REG(codec,ALI_SPDIF_CTRL));
+ outb(bval, ALI_REG(codec, ALI_SPDIF_CTRL));
snd_ali_detect_spdif_rate(codec);
- bval = inb(ALI_REG(codec,ALI_SPDIF_CS + 3));
- bval &= 0x0F;
+ bval = inb(ALI_REG(codec, ALI_SPDIF_CS + 3));
+ bval &= 0x0f;
- if (bval == 0) dwRate = 44100;
- if (bval == 1) dwRate = 48000;
- if (bval == 2) dwRate = 32000;
+ switch (bval) {
+ case 0: dwRate = 44100; break;
+ case 1: dwRate = 48000; break;
+ case 2: dwRate = 32000; break;
+ default: dwRate = 0; break;
+ }
return dwRate;
}
@@ -880,20 +821,22 @@
static void snd_ali_set_spdif_out_rate(struct snd_ali *codec, unsigned int rate)
{
unsigned char bVal;
- unsigned int dwRate = 0;
+ unsigned int dwRate;
- if (rate == 32000) dwRate = 0x300;
- if (rate == 44100) dwRate = 0;
- if (rate == 48000) dwRate = 0x200;
+ switch (rate) {
+ case 32000: dwRate = 0x300; break;
+ case 48000: dwRate = 0x200; break;
+ default: dwRate = 0; break;
+ }
bVal = inb(ALI_REG(codec, ALI_SPDIF_CTRL));
bVal &= (unsigned char)(~(1<<6));
- bVal |= 0x80; //select right
+ bVal |= 0x80; /* select right */
outb(bVal, ALI_REG(codec, ALI_SPDIF_CTRL));
outb(dwRate | 0x20, ALI_REG(codec, ALI_SPDIF_CS + 2));
- bVal &= (~0x80); //select left
+ bVal &= ~0x80; /* select left */
outb(bVal, ALI_REG(codec, ALI_SPDIF_CTRL));
outw(rate | 0x10, ALI_REG(codec, ALI_SPDIF_CS + 2));
}
@@ -902,8 +845,7 @@
{
unsigned short wVal;
unsigned char bVal;
-
- struct pci_dev *pci_dev = NULL;
+ struct pci_dev *pci_dev;
pci_dev = codec->pci_m1533;
if (pci_dev == NULL)
@@ -926,17 +868,15 @@
bVal = inb(ALI_REG(codec, ALI_SPDIF_CTRL));
outb(bVal & ALI_SPDIF_OUT_CH_STATUS, ALI_REG(codec, ALI_SPDIF_CTRL));
- {
- wVal = inw(ALI_REG(codec, ALI_GLOBAL_CONTROL));
- wVal |= ALI_SPDIF_OUT_SEL_PCM;
- outw(wVal, ALI_REG(codec, ALI_GLOBAL_CONTROL));
- snd_ali_disable_special_channel(codec,ALI_SPDIF_OUT_CHANNEL);
- }
+ wVal = inw(ALI_REG(codec, ALI_GLOBAL_CONTROL));
+ wVal |= ALI_SPDIF_OUT_SEL_PCM;
+ outw(wVal, ALI_REG(codec, ALI_GLOBAL_CONTROL));
+ snd_ali_disable_special_channel(codec, ALI_SPDIF_OUT_CHANNEL);
}
static void snd_ali_enable_spdif_chnout(struct snd_ali *codec)
{
- unsigned short wVal = 0;
+ unsigned short wVal;
wVal = inw(ALI_REG(codec, ALI_GLOBAL_CONTROL));
wVal &= ~ALI_SPDIF_OUT_SEL_PCM;
@@ -949,12 +889,13 @@
wVal &= (~0x0002);
outw(wVal, ALI_REG(codec, ALI_SPDIF_CS));
*/
- snd_ali_enable_special_channel(codec,ALI_SPDIF_OUT_CHANNEL);
+ snd_ali_enable_special_channel(codec, ALI_SPDIF_OUT_CHANNEL);
}
static void snd_ali_disable_spdif_chnout(struct snd_ali *codec)
{
- unsigned short wVal = 0;
+ unsigned short wVal;
+
wVal = inw(ALI_REG(codec, ALI_GLOBAL_CONTROL));
wVal |= ALI_SPDIF_OUT_SEL_PCM;
outw(wVal, ALI_REG(codec, ALI_GLOBAL_CONTROL));
@@ -972,11 +913,11 @@
snd_ali_disable_spdif_chnout(codec);
}
-static void snd_ali_update_ptr(struct snd_ali *codec,int channel)
+static void snd_ali_update_ptr(struct snd_ali *codec, int channel)
{
- struct snd_ali_voice *pvoice = NULL;
+ struct snd_ali_voice *pvoice;
struct snd_pcm_runtime *runtime;
- struct snd_ali_channel_control *pchregs = NULL;
+ struct snd_ali_channel_control *pchregs;
unsigned int old, mask;
#ifdef ALI_DEBUG
unsigned int temp, cspf;
@@ -984,9 +925,9 @@
pchregs = &(codec->chregs);
- // check if interrupt occurred for channel
+ /* check if interrupt occurred for channel */
old = pchregs->data.aint;
- mask = ((unsigned int) 1L) << (channel & 0x1f);
+ mask = 1U << (channel & 0x1f);
if (!(old & mask))
return;
@@ -1005,7 +946,8 @@
cspf = (inl(ALI_REG(codec, ALI_CSPF)) & mask) == mask;
#endif
if (pvoice->running) {
- snd_ali_printk("update_ptr: cso=%4.4x cspf=%d.\n",(u16)temp,cspf);
+ snd_ali_printk("update_ptr: cso=%4.4x cspf=%d.\n",
+ (u16)temp, cspf);
spin_unlock(&codec->reg_lock);
snd_pcm_period_elapsed(pvoice->substream);
spin_lock(&codec->reg_lock);
@@ -1027,49 +969,47 @@
pchregs->data.aint = old & (~mask);
}
-static void snd_ali_interrupt(struct snd_ali * codec)
-{
- int channel;
- unsigned int audio_int;
- struct snd_ali_channel_control *pchregs = NULL;
- pchregs = &(codec->chregs);
-
- audio_int = inl(ALI_REG(codec, ALI_MISCINT));
- if (audio_int & ADDRESS_IRQ) {
- // get interrupt status for all channels
- pchregs->data.aint = inl(ALI_REG(codec,pchregs->regs.aint));
- for (channel = 0; channel < ALI_CHANNELS; channel++) {
- snd_ali_update_ptr(codec, channel);
- }
- }
- outl((TARGET_REACHED | MIXER_OVERFLOW | MIXER_UNDERFLOW),
- ALI_REG(codec,ALI_MISCINT));
-}
-
-
static irqreturn_t snd_ali_card_interrupt(int irq, void *dev_id)
{
struct snd_ali *codec = dev_id;
+ int channel;
+ unsigned int audio_int;
+ struct snd_ali_channel_control *pchregs;
- if (codec == NULL)
+ if (codec == NULL || !codec->hw_initialized)
return IRQ_NONE;
- snd_ali_interrupt(codec);
+
+ audio_int = inl(ALI_REG(codec, ALI_MISCINT));
+ if (!audio_int)
+ return IRQ_NONE;
+
+ pchregs = &(codec->chregs);
+ if (audio_int & ADDRESS_IRQ) {
+ /* get interrupt status for all channels */
+ pchregs->data.aint = inl(ALI_REG(codec, pchregs->regs.aint));
+ for (channel = 0; channel < ALI_CHANNELS; channel++)
+ snd_ali_update_ptr(codec, channel);
+ }
+ outl((TARGET_REACHED | MIXER_OVERFLOW | MIXER_UNDERFLOW),
+ ALI_REG(codec, ALI_MISCINT));
+
return IRQ_HANDLED;
}
-static struct snd_ali_voice *snd_ali_alloc_voice(struct snd_ali * codec, int type, int rec, int channel)
+static struct snd_ali_voice *snd_ali_alloc_voice(struct snd_ali * codec,
+ int type, int rec, int channel)
{
- struct snd_ali_voice *pvoice = NULL;
+ struct snd_ali_voice *pvoice;
int idx;
- snd_ali_printk("alloc_voice: type=%d rec=%d\n",type,rec);
+ snd_ali_printk("alloc_voice: type=%d rec=%d\n", type, rec);
spin_lock_irq(&codec->voice_alloc);
if (type == SNDRV_ALI_VOICE_TYPE_PCM) {
idx = channel > 0 ? snd_ali_alloc_pcm_channel(codec, channel) :
snd_ali_find_free_channel(codec,rec);
- if(idx < 0) {
+ if (idx < 0) {
snd_printk(KERN_ERR "ali_alloc_voice: err.\n");
spin_unlock_irq(&codec->voice_alloc);
return NULL;
@@ -1087,7 +1027,8 @@
}
-static void snd_ali_free_voice(struct snd_ali * codec, struct snd_ali_voice *pvoice)
+static void snd_ali_free_voice(struct snd_ali * codec,
+ struct snd_ali_voice *pvoice)
{
void (*private_free)(void *);
void *private_data;
@@ -1101,9 +1042,8 @@
private_data = pvoice->private_data;
pvoice->private_free = NULL;
pvoice->private_data = NULL;
- if (pvoice->pcm) {
+ if (pvoice->pcm)
snd_ali_free_channel_pcm(codec, pvoice->number);
- }
pvoice->use = pvoice->pcm = pvoice->synth = 0;
pvoice->substream = NULL;
spin_unlock_irq(&codec->voice_alloc);
@@ -1112,9 +1052,9 @@
}
-static void snd_ali_clear_voices(struct snd_ali * codec,
- unsigned int v_min,
- unsigned int v_max)
+static void snd_ali_clear_voices(struct snd_ali *codec,
+ unsigned int v_min,
+ unsigned int v_max)
{
unsigned int i;
@@ -1124,7 +1064,7 @@
}
}
-static void snd_ali_write_voice_regs(struct snd_ali * codec,
+static void snd_ali_write_voice_regs(struct snd_ali *codec,
unsigned int Channel,
unsigned int LBA,
unsigned int CSO,
@@ -1139,7 +1079,7 @@
{
unsigned int ctlcmds[4];
- outb((unsigned char)(Channel & 0x001f),ALI_REG(codec,ALI_GC_CIR));
+ outb((unsigned char)(Channel & 0x001f), ALI_REG(codec, ALI_GC_CIR));
ctlcmds[0] = (CSO << 16) | (ALPHA_FMS & 0x0000ffff);
ctlcmds[1] = LBA;
@@ -1152,10 +1092,10 @@
outb(Channel, ALI_REG(codec, ALI_GC_CIR));
- outl(ctlcmds[0], ALI_REG(codec,ALI_CSO_ALPHA_FMS));
- outl(ctlcmds[1], ALI_REG(codec,ALI_LBA));
- outl(ctlcmds[2], ALI_REG(codec,ALI_ESO_DELTA));
- outl(ctlcmds[3], ALI_REG(codec,ALI_GVSEL_PAN_VOC_CTRL_EC));
+ outl(ctlcmds[0], ALI_REG(codec, ALI_CSO_ALPHA_FMS));
+ outl(ctlcmds[1], ALI_REG(codec, ALI_LBA));
+ outl(ctlcmds[2], ALI_REG(codec, ALI_ESO_DELTA));
+ outl(ctlcmds[3], ALI_REG(codec, ALI_GVSEL_PAN_VOC_CTRL_EC));
outl(0x30000000, ALI_REG(codec, ALI_EBUF1)); /* Still Mode */
outl(0x30000000, ALI_REG(codec, ALI_EBUF2)); /* Still Mode */
@@ -1165,8 +1105,10 @@
{
unsigned int delta;
- if (rate < 4000) rate = 4000;
- if (rate > 48000) rate = 48000;
+ if (rate < 4000)
+ rate = 4000;
+ if (rate > 48000)
+ rate = 48000;
if (rec) {
if (rate == 44100)
@@ -1201,11 +1143,11 @@
*/
CTRL = 0x00000001;
if (snd_pcm_format_width(runtime->format) == 16)
- CTRL |= 0x00000008; // 16-bit data
+ CTRL |= 0x00000008; /* 16-bit data */
if (!snd_pcm_format_unsigned(runtime->format))
- CTRL |= 0x00000002; // signed data
+ CTRL |= 0x00000002; /* signed data */
if (runtime->channels > 1)
- CTRL |= 0x00000004; // stereo data
+ CTRL |= 0x00000004; /* stereo data */
return CTRL;
}
@@ -1213,45 +1155,39 @@
* PCM part
*/
-static int snd_ali_ioctl(struct snd_pcm_substream *substream,
- unsigned int cmd, void *arg)
-{
- return snd_pcm_lib_ioctl(substream, cmd, arg);
-}
-
static int snd_ali_trigger(struct snd_pcm_substream *substream,
int cmd)
{
struct snd_ali *codec = snd_pcm_substream_chip(substream);
- struct list_head *pos;
struct snd_pcm_substream *s;
unsigned int what, whati, capture_flag;
- struct snd_ali_voice *pvoice = NULL, *evoice = NULL;
+ struct snd_ali_voice *pvoice, *evoice;
unsigned int val;
int do_start;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
- do_start = 1; break;
+ do_start = 1;
+ break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
- do_start = 0; break;
+ do_start = 0;
+ break;
default:
return -EINVAL;
}
what = whati = capture_flag = 0;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if ((struct snd_ali *) snd_pcm_substream_chip(s) == codec) {
pvoice = s->runtime->private_data;
evoice = pvoice->extra;
what |= 1 << (pvoice->number & 0x1f);
- if (evoice == NULL) {
+ if (evoice == NULL)
whati |= 1 << (pvoice->number & 0x1f);
- } else {
+ else {
whati |= 1 << (evoice->number & 0x1f);
what |= 1 << (evoice->number & 0x1f);
}
@@ -1270,48 +1206,51 @@
}
}
spin_lock(&codec->reg_lock);
- if (! do_start) {
+ if (!do_start)
outl(what, ALI_REG(codec, ALI_STOP));
- }
val = inl(ALI_REG(codec, ALI_AINTEN));
- if (do_start) {
+ if (do_start)
val |= whati;
- } else {
+ else
val &= ~whati;
- }
outl(val, ALI_REG(codec, ALI_AINTEN));
- if (do_start) {
+ if (do_start)
outl(what, ALI_REG(codec, ALI_START));
- }
- snd_ali_printk("trigger: what=%xh whati=%xh\n",what,whati);
+ snd_ali_printk("trigger: what=%xh whati=%xh\n", what, whati);
spin_unlock(&codec->reg_lock);
return 0;
}
static int snd_ali_playback_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
+ struct snd_pcm_hw_params *hw_params)
{
struct snd_ali *codec = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_ali_voice *pvoice = runtime->private_data;
struct snd_ali_voice *evoice = pvoice->extra;
int err;
- err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
- if (err < 0) return err;
+
+ err = snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
+ if (err < 0)
+ return err;
/* voice management */
- if (params_buffer_size(hw_params)/2 != params_period_size(hw_params)) {
- if (evoice == NULL) {
- evoice = snd_ali_alloc_voice(codec, SNDRV_ALI_VOICE_TYPE_PCM, 0, -1);
- if (evoice == NULL)
+ if (params_buffer_size(hw_params) / 2 !=
+ params_period_size(hw_params)) {
+ if (!evoice) {
+ evoice = snd_ali_alloc_voice(codec,
+ SNDRV_ALI_VOICE_TYPE_PCM,
+ 0, -1);
+ if (!evoice)
return -ENOMEM;
pvoice->extra = evoice;
evoice->substream = substream;
}
} else {
- if (evoice != NULL) {
+ if (!evoice) {
snd_ali_free_voice(codec, evoice);
pvoice->extra = evoice = NULL;
}
@@ -1328,7 +1267,7 @@
struct snd_ali_voice *evoice = pvoice ? pvoice->extra : NULL;
snd_pcm_lib_free_pages(substream);
- if (evoice != NULL) {
+ if (!evoice) {
snd_ali_free_voice(codec, evoice);
pvoice->extra = NULL;
}
@@ -1336,9 +1275,10 @@
}
static int snd_ali_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
+ struct snd_pcm_hw_params *hw_params)
{
- return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
+ return snd_pcm_lib_malloc_pages(substream,
+ params_buffer_bytes(hw_params));
}
static int snd_ali_hw_free(struct snd_pcm_substream *substream)
@@ -1369,12 +1309,13 @@
/* set Delta (rate) value */
Delta = snd_ali_convert_rate(runtime->rate, 0);
- if ((pvoice->number == ALI_SPDIF_IN_CHANNEL) ||
- (pvoice->number == ALI_PCM_IN_CHANNEL))
+ if (pvoice->number == ALI_SPDIF_IN_CHANNEL ||
+ pvoice->number == ALI_PCM_IN_CHANNEL)
snd_ali_disable_special_channel(codec, pvoice->number);
else if (codec->spdif_support &&
- (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) & ALI_SPDIF_OUT_CH_ENABLE)
- && (pvoice->number == ALI_SPDIF_OUT_CHANNEL)) {
+ (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) &
+ ALI_SPDIF_OUT_CH_ENABLE)
+ && pvoice->number == ALI_SPDIF_OUT_CHANNEL) {
snd_ali_set_spdif_out_rate(codec, runtime->rate);
Delta = 0x1000;
}
@@ -1388,7 +1329,8 @@
/* set target ESO for channel */
pvoice->eso = runtime->buffer_size;
- snd_ali_printk("playback_prepare: eso=%xh count=%xh\n",pvoice->eso,pvoice->count);
+ snd_ali_printk("playback_prepare: eso=%xh count=%xh\n",
+ pvoice->eso, pvoice->count);
/* set ESO to capture first MIDLP interrupt */
ESO = pvoice->eso -1;
@@ -1399,35 +1341,37 @@
PAN = 0;
VOL = 0;
EC = 0;
- snd_ali_printk("playback_prepare:\n ch=%d, Rate=%d Delta=%xh,GVSEL=%xh,PAN=%xh,CTRL=%xh\n",pvoice->number,runtime->rate,Delta,GVSEL,PAN,CTRL);
- snd_ali_write_voice_regs( codec,
- pvoice->number,
- LBA,
- 0, /* cso */
- ESO,
- Delta,
- 0, /* alpha */
- GVSEL,
- PAN,
- VOL,
- CTRL,
- EC);
- if (evoice != NULL) {
+ snd_ali_printk("playback_prepare:\n");
+ snd_ali_printk("ch=%d, Rate=%d Delta=%xh,GVSEL=%xh,PAN=%xh,CTRL=%xh\n",
+ pvoice->number,runtime->rate,Delta,GVSEL,PAN,CTRL);
+ snd_ali_write_voice_regs(codec,
+ pvoice->number,
+ LBA,
+ 0, /* cso */
+ ESO,
+ Delta,
+ 0, /* alpha */
+ GVSEL,
+ PAN,
+ VOL,
+ CTRL,
+ EC);
+ if (!evoice) {
evoice->count = pvoice->count;
evoice->eso = pvoice->count << 1;
ESO = evoice->eso - 1;
snd_ali_write_voice_regs(codec,
- evoice->number,
- LBA,
- 0, /* cso */
- ESO,
- Delta,
- 0, /* alpha */
- GVSEL,
- (unsigned int)0x7f,
- (unsigned int)0x3ff,
- CTRL,
- EC);
+ evoice->number,
+ LBA,
+ 0, /* cso */
+ ESO,
+ Delta,
+ 0, /* alpha */
+ GVSEL,
+ 0x7f,
+ 0x3ff,
+ CTRL,
+ EC);
}
spin_unlock_irq(&codec->reg_lock);
return 0;
@@ -1459,7 +1403,7 @@
pvoice->number == ALI_MODEM_OUT_CHANNEL) ?
0x1000 : snd_ali_convert_rate(runtime->rate, pvoice->mode);
- // Prepare capture intr channel
+ /* Prepare capture intr channel */
if (pvoice->number == ALI_SPDIF_IN_CHANNEL) {
unsigned int rate;
@@ -1470,7 +1414,8 @@
rate = snd_ali_get_spdif_in_rate(codec);
if (rate == 0) {
- snd_printk(KERN_WARNING "ali_capture_preapre: spdif rate detect err!\n");
+ snd_printk(KERN_WARNING "ali_capture_preapre: "
+ "spdif rate detect err!\n");
rate = 48000;
}
spin_lock_irq(&codec->reg_lock);
@@ -1481,19 +1426,19 @@
}
if (rate != 48000)
- Delta = ((rate << 12)/runtime->rate)&0x00ffff;
+ Delta = ((rate << 12) / runtime->rate) & 0x00ffff;
}
- // set target ESO for channel
+ /* set target ESO for channel */
pvoice->eso = runtime->buffer_size;
- // set interrupt count size
+ /* set interrupt count size */
pvoice->count = runtime->period_size;
- // set Loop Back Address
+ /* set Loop Back Address */
LBA = runtime->dma_addr;
- // set ESO to capture first MIDLP interrupt
+ /* set ESO to capture first MIDLP interrupt */
ESO = pvoice->eso - 1;
CTRL = snd_ali_control_mode(substream);
GVSEL = 0;
@@ -1514,14 +1459,14 @@
CTRL,
EC);
-
spin_unlock_irq(&codec->reg_lock);
return 0;
}
-static snd_pcm_uframes_t snd_ali_playback_pointer(struct snd_pcm_substream *substream)
+static snd_pcm_uframes_t
+snd_ali_playback_pointer(struct snd_pcm_substream *substream)
{
struct snd_ali *codec = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
@@ -1563,14 +1508,14 @@
static struct snd_pcm_hardware snd_ali_playback =
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_SYNC_START),
- .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE),
- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
+ .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE),
+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
.rate_min = 4000,
.rate_max = 48000,
.channels_min = 1,
@@ -1589,14 +1534,14 @@
static struct snd_pcm_hardware snd_ali_capture =
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_SYNC_START),
- .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE),
- .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
+ .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U16_LE),
+ .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000,
.rate_min = 4000,
.rate_max = 48000,
.channels_min = 1,
@@ -1620,15 +1565,16 @@
}
}
-static int snd_ali_open(struct snd_pcm_substream *substream, int rec, int channel,
- struct snd_pcm_hardware *phw)
+static int snd_ali_open(struct snd_pcm_substream *substream, int rec,
+ int channel, struct snd_pcm_hardware *phw)
{
struct snd_ali *codec = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_ali_voice *pvoice;
- pvoice = snd_ali_alloc_voice(codec, SNDRV_ALI_VOICE_TYPE_PCM, rec, channel);
- if (pvoice == NULL)
+ pvoice = snd_ali_alloc_voice(codec, SNDRV_ALI_VOICE_TYPE_PCM, rec,
+ channel);
+ if (!pvoice)
return -EAGAIN;
pvoice->substream = substream;
@@ -1637,7 +1583,8 @@
runtime->hw = *phw;
snd_pcm_set_sync(substream);
- snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE, 0, 64*1024);
+ snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+ 0, 64*1024);
return 0;
}
@@ -1669,7 +1616,7 @@
static struct snd_pcm_ops snd_ali_playback_ops = {
.open = snd_ali_playback_open,
.close = snd_ali_playback_close,
- .ioctl = snd_ali_ioctl,
+ .ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_ali_playback_hw_params,
.hw_free = snd_ali_playback_hw_free,
.prepare = snd_ali_playback_prepare,
@@ -1680,7 +1627,7 @@
static struct snd_pcm_ops snd_ali_capture_ops = {
.open = snd_ali_capture_open,
.close = snd_ali_close,
- .ioctl = snd_ali_ioctl,
+ .ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_ali_hw_params,
.hw_free = snd_ali_hw_free,
.prepare = snd_ali_prepare,
@@ -1697,20 +1644,22 @@
{
struct snd_ali *chip = snd_pcm_substream_chip(substream);
unsigned int modem_num = chip->num_of_codecs - 1;
- snd_ac97_write(chip->ac97[modem_num], AC97_LINE1_RATE, params_rate(hw_params));
+ snd_ac97_write(chip->ac97[modem_num], AC97_LINE1_RATE,
+ params_rate(hw_params));
snd_ac97_write(chip->ac97[modem_num], AC97_LINE1_LEVEL, 0);
return snd_ali_hw_params(substream, hw_params);
}
static struct snd_pcm_hardware snd_ali_modem =
{
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_SYNC_START),
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
- .rates = SNDRV_PCM_RATE_KNOT|SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_16000,
+ .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_8000 |
+ SNDRV_PCM_RATE_16000),
.rate_min = 8000,
.rate_max = 16000,
.channels_min = 1,
@@ -1723,15 +1672,17 @@
.fifo_size = 0,
};
-static int snd_ali_modem_open(struct snd_pcm_substream *substream, int rec, int channel)
+static int snd_ali_modem_open(struct snd_pcm_substream *substream, int rec,
+ int channel)
{
- static unsigned int rates [] = {8000,9600,12000,16000};
+ static unsigned int rates[] = {8000, 9600, 12000, 16000};
static struct snd_pcm_hw_constraint_list hw_constraint_rates = {
.count = ARRAY_SIZE(rates),
.list = rates,
.mask = 0,
};
int err = snd_ali_open(substream, rec, channel, &snd_ali_modem);
+
if (err)
return err;
return snd_pcm_hw_constraint_list(substream->runtime, 0,
@@ -1788,7 +1739,8 @@
}
-static int __devinit snd_ali_pcm(struct snd_ali * codec, int device, struct ali_pcm_description *desc)
+static int __devinit snd_ali_pcm(struct snd_ali * codec, int device,
+ struct ali_pcm_description *desc)
{
struct snd_pcm *pcm;
int err;
@@ -1802,12 +1754,15 @@
pcm->private_data = codec;
pcm->private_free = snd_ali_pcm_free;
if (desc->playback_ops)
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, desc->playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ desc->playback_ops);
if (desc->capture_ops)
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, desc->capture_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ desc->capture_ops);
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
- snd_dma_pci_data(codec->pci), 64*1024, 128*1024);
+ snd_dma_pci_data(codec->pci),
+ 64*1024, 128*1024);
pcm->info_flags = 0;
pcm->dev_class = desc->class;
@@ -1818,16 +1773,29 @@
}
static struct ali_pcm_description ali_pcms[] = {
- { "ALI 5451", ALI_CHANNELS, 1, &snd_ali_playback_ops, &snd_ali_capture_ops },
- { "ALI 5451 modem", 1, 1, &snd_ali_modem_playback_ops, &snd_ali_modem_capture_ops, SNDRV_PCM_CLASS_MODEM }
+ { .name = "ALI 5451",
+ .playback_num = ALI_CHANNELS,
+ .capture_num = 1,
+ .playback_ops = &snd_ali_playback_ops,
+ .capture_ops = &snd_ali_capture_ops
+ },
+ { .name = "ALI 5451 modem",
+ .playback_num = 1,
+ .capture_num = 1,
+ .playback_ops = &snd_ali_modem_playback_ops,
+ .capture_ops = &snd_ali_modem_capture_ops,
+ .class = SNDRV_PCM_CLASS_MODEM
+ }
};
static int __devinit snd_ali_build_pcms(struct snd_ali *codec)
{
int i, err;
- for(i = 0 ; i < codec->num_of_codecs && i < ARRAY_SIZE(ali_pcms) ; i++)
- if((err = snd_ali_pcm(codec, i, &ali_pcms[i])) < 0)
+ for (i = 0; i < codec->num_of_codecs && i < ARRAY_SIZE(ali_pcms); i++) {
+ err = snd_ali_pcm(codec, i, &ali_pcms[i]);
+ if (err < 0)
return err;
+ }
return 0;
}
@@ -1837,7 +1805,8 @@
.info = snd_ali5451_spdif_info, .get = snd_ali5451_spdif_get, \
.put = snd_ali5451_spdif_put, .private_value = value}
-static int snd_ali5451_spdif_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_ali5451_spdif_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;
@@ -1846,7 +1815,8 @@
return 0;
}
-static int snd_ali5451_spdif_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ali5451_spdif_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_ali *codec = kcontrol->private_data;
unsigned int enable;
@@ -1854,12 +1824,13 @@
enable = ucontrol->value.integer.value[0] ? 1 : 0;
spin_lock_irq(&codec->reg_lock);
- switch(kcontrol->private_value) {
+ switch (kcontrol->private_value) {
case 0:
enable = (codec->spdif_mask & 0x02) ? 1 : 0;
break;
case 1:
- enable = ((codec->spdif_mask & 0x02) && (codec->spdif_mask & 0x04)) ? 1 : 0;
+ enable = ((codec->spdif_mask & 0x02) &&
+ (codec->spdif_mask & 0x04)) ? 1 : 0;
break;
case 2:
enable = (codec->spdif_mask & 0x01) ? 1 : 0;
@@ -1872,7 +1843,8 @@
return 0;
}
-static int snd_ali5451_spdif_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ali5451_spdif_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct snd_ali *codec = kcontrol->private_data;
unsigned int change = 0, enable = 0;
@@ -1939,18 +1911,6 @@
ALI5451_SPDIF(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0, 2)
};
-static void snd_ali_mixer_free_ac97_bus(struct snd_ac97_bus *bus)
-{
- struct snd_ali *codec = bus->private_data;
- codec->ac97_bus = NULL;
-}
-
-static void snd_ali_mixer_free_ac97(struct snd_ac97 *ac97)
-{
- struct snd_ali *codec = ac97->private_data;
- codec->ac97[ac97->num] = NULL;
-}
-
static int __devinit snd_ali_mixer(struct snd_ali * codec)
{
struct snd_ac97_template ac97;
@@ -1961,19 +1921,20 @@
.read = snd_ali_codec_read,
};
- if ((err = snd_ac97_bus(codec->card, 0, &ops, codec, &codec->ac97_bus)) < 0)
+ err = snd_ac97_bus(codec->card, 0, &ops, codec, &codec->ac97_bus);
+ if (err < 0)
return err;
- codec->ac97_bus->private_free = snd_ali_mixer_free_ac97_bus;
memset(&ac97, 0, sizeof(ac97));
ac97.private_data = codec;
- ac97.private_free = snd_ali_mixer_free_ac97;
- for ( i = 0 ; i < codec->num_of_codecs ; i++) {
+ for (i = 0; i < codec->num_of_codecs; i++) {
ac97.num = i;
- if ((err = snd_ac97_mixer(codec->ac97_bus, &ac97, &codec->ac97[i])) < 0) {
- snd_printk(KERN_ERR "ali mixer %d creating error.\n", i);
- if(i == 0)
+ err = snd_ac97_mixer(codec->ac97_bus, &ac97, &codec->ac97[i]);
+ if (err < 0) {
+ snd_printk(KERN_ERR
+ "ali mixer %d creating error.\n", i);
+ if (i == 0)
return err;
codec->num_of_codecs = 1;
break;
@@ -1981,9 +1942,11 @@
}
if (codec->spdif_support) {
- for(idx = 0; idx < ARRAY_SIZE(snd_ali5451_mixer_spdif); idx++) {
- err=snd_ctl_add(codec->card, snd_ctl_new1(&snd_ali5451_mixer_spdif[idx], codec));
- if (err < 0) return err;
+ for (idx = 0; idx < ARRAY_SIZE(snd_ali5451_mixer_spdif); idx++) {
+ err = snd_ctl_add(codec->card,
+ snd_ctl_new1(&snd_ali5451_mixer_spdif[idx], codec));
+ if (err < 0)
+ return err;
}
}
return 0;
@@ -1998,11 +1961,11 @@
int i, j;
im = chip->image;
- if (! im)
+ if (!im)
return 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- for(i = 0 ; i < chip->num_of_codecs ; i++) {
+ for (i = 0; i < chip->num_of_codecs; i++) {
snd_pcm_suspend_all(chip->pcm[i]);
snd_ac97_suspend(chip->ac97[i]);
}
@@ -2010,10 +1973,10 @@
spin_lock_irq(&chip->reg_lock);
im->regs[ALI_MISCINT >> 2] = inl(ALI_REG(chip, ALI_MISCINT));
- // im->regs[ALI_START >> 2] = inl(ALI_REG(chip, ALI_START));
+ /* im->regs[ALI_START >> 2] = inl(ALI_REG(chip, ALI_START)); */
im->regs[ALI_STOP >> 2] = inl(ALI_REG(chip, ALI_STOP));
- // disable all IRQ bits
+ /* disable all IRQ bits */
outl(0, ALI_REG(chip, ALI_MISCINT));
for (i = 0; i < ALI_GLOBAL_REGS; i++) {
@@ -2028,7 +1991,7 @@
im->channel_regs[i][j] = inl(ALI_REG(chip, j*4 + 0xe0));
}
- // stop all HW channel
+ /* stop all HW channel */
outl(0xffffffff, ALI_REG(chip, ALI_STOP));
spin_unlock_irq(&chip->reg_lock);
@@ -2047,7 +2010,7 @@
int i, j;
im = chip->image;
- if (! im)
+ if (!im)
return 0;
pci_set_power_state(pci, PCI_D0);
@@ -2069,19 +2032,20 @@
}
for (i = 0; i < ALI_GLOBAL_REGS; i++) {
- if ((i*4 == ALI_MISCINT) || (i*4 == ALI_STOP) || (i*4 == ALI_START))
+ if ((i*4 == ALI_MISCINT) || (i*4 == ALI_STOP) ||
+ (i*4 == ALI_START))
continue;
outl(im->regs[i], ALI_REG(chip, i*4));
}
- // start HW channel
+ /* start HW channel */
outl(im->regs[ALI_START >> 2], ALI_REG(chip, ALI_START));
- // restore IRQ enable bits
+ /* restore IRQ enable bits */
outl(im->regs[ALI_MISCINT >> 2], ALI_REG(chip, ALI_MISCINT));
spin_unlock_irq(&chip->reg_lock);
- for(i = 0 ; i < chip->num_of_codecs ; i++)
+ for (i = 0 ; i < chip->num_of_codecs; i++)
snd_ac97_resume(chip->ac97[i]);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
@@ -2113,7 +2077,7 @@
{
unsigned int legacy;
unsigned char temp;
- struct pci_dev *pci_dev = NULL;
+ struct pci_dev *pci_dev;
snd_ali_printk("chip initializing ... \n");
@@ -2146,7 +2110,8 @@
outb(0x10, ALI_REG(codec, ALI_MPUR2));
codec->ac97_ext_id = snd_ali_codec_peek(codec, 0, AC97_EXTENDED_ID);
- codec->ac97_ext_status = snd_ali_codec_peek(codec, 0, AC97_EXTENDED_STATUS);
+ codec->ac97_ext_status = snd_ali_codec_peek(codec, 0,
+ AC97_EXTENDED_STATUS);
if (codec->spdif_support) {
snd_ali_enable_spdif_out(codec);
codec->spdif_mask = 0x00000002;
@@ -2158,8 +2123,9 @@
if (inl(ALI_REG(codec, ALI_SCTRL)) & ALI_SCTRL_CODEC2_READY) {
codec->num_of_codecs++;
outl(inl(ALI_REG(codec, ALI_SCTRL)) |
- (ALI_SCTRL_LINE_IN2|ALI_SCTRL_GPIO_IN2|ALI_SCTRL_LINE_OUT_EN),
- ALI_REG(codec, ALI_SCTRL));
+ (ALI_SCTRL_LINE_IN2 | ALI_SCTRL_GPIO_IN2 |
+ ALI_SCTRL_LINE_OUT_EN),
+ ALI_REG(codec, ALI_SCTRL));
}
snd_ali_printk("chip initialize succeed.\n");
@@ -2168,18 +2134,19 @@
}
/* proc for register dump */
-static void snd_ali_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buf)
+static void snd_ali_proc_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buf)
{
struct snd_ali *codec = entry->private_data;
int i;
- for(i = 0 ; i < 256 ; i+= 4)
+ for (i = 0; i < 256 ; i+= 4)
snd_iprintf(buf, "%02x: %08x\n", i, inl(ALI_REG(codec, i)));
}
static void __devinit snd_ali_proc_init(struct snd_ali *codec)
{
struct snd_info_entry *entry;
- if(!snd_card_proc_new(codec->card, "ali5451", &entry))
+ if (!snd_card_proc_new(codec->card, "ali5451", &entry))
snd_info_set_text_ops(entry, codec, snd_ali_proc_read);
}
@@ -2188,7 +2155,8 @@
int err;
snd_ali_printk("resouces allocation ...\n");
- if ((err = pci_request_regions(codec->pci, "ALI 5451")) < 0)
+ err = pci_request_regions(codec->pci, "ALI 5451");
+ if (err < 0)
return err;
codec->port = pci_resource_start(codec->pci, 0);
@@ -2201,9 +2169,9 @@
snd_ali_printk("resouces allocated.\n");
return 0;
}
-static int snd_ali_dev_free(struct snd_device *device)
+static int snd_ali_dev_free(struct snd_device *device)
{
- struct snd_ali *codec=device->device_data;
+ struct snd_ali *codec = device->device_data;
snd_ali_free(codec);
return 0;
}
@@ -2226,17 +2194,20 @@
snd_ali_printk("creating ...\n");
/* enable PCI device */
- if ((err = pci_enable_device(pci)) < 0)
+ err = pci_enable_device(pci);
+ if (err < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 31 bits */
if (pci_set_dma_mask(pci, DMA_31BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_31BIT_MASK) < 0) {
- snd_printk(KERN_ERR "architecture does not support 31bit PCI busmaster DMA\n");
+ snd_printk(KERN_ERR "architecture does not support "
+ "31bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
}
- if ((codec = kzalloc(sizeof(*codec), GFP_KERNEL)) == NULL) {
+ codec = kzalloc(sizeof(*codec), GFP_KERNEL);
+ if (!codec) {
pci_disable_device(pci);
return -ENOMEM;
}
@@ -2293,21 +2264,22 @@
/* M1533: southbridge */
codec->pci_m1533 = pci_get_device(0x10b9, 0x1533, NULL);
- if (! codec->pci_m1533) {
+ if (!codec->pci_m1533) {
snd_printk(KERN_ERR "ali5451: cannot find ALi 1533 chip.\n");
snd_ali_free(codec);
return -ENODEV;
}
/* M7101: power management */
codec->pci_m7101 = pci_get_device(0x10b9, 0x7101, NULL);
- if (! codec->pci_m7101 && codec->revision == ALI_5451_V02) {
+ if (!codec->pci_m7101 && codec->revision == ALI_5451_V02) {
snd_printk(KERN_ERR "ali5451: cannot find ALi 7101 chip.\n");
snd_ali_free(codec);
return -ENODEV;
}
snd_ali_printk("snd_device_new is called.\n");
- if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, codec, &ops)) < 0) {
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, codec, &ops);
+ if (err < 0) {
snd_ali_free(codec);
return err;
}
@@ -2315,18 +2287,18 @@
snd_card_set_dev(card, &pci->dev);
/* initialise synth voices*/
- for (i = 0; i < ALI_CHANNELS; i++ ) {
+ for (i = 0; i < ALI_CHANNELS; i++)
codec->synth.voices[i].number = i;
- }
- if ((err = snd_ali_chip_init(codec)) < 0) {
+ err = snd_ali_chip_init(codec);
+ if (err < 0) {
snd_printk(KERN_ERR "ali create: chip init error.\n");
return err;
}
#ifdef CONFIG_PM
codec->image = kmalloc(sizeof(*codec->image), GFP_KERNEL);
- if (! codec->image)
+ if (!codec->image)
snd_printk(KERN_WARNING "can't allocate apm buffer\n");
#endif
@@ -2348,26 +2320,23 @@
snd_ali_printk("probe ...\n");
card = snd_card_new(index, id, THIS_MODULE, 0);
- if (card == NULL)
+ if (!card)
return -ENOMEM;
- if ((err = snd_ali_create(card, pci, pcm_channels, spdif, &codec)) < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_ali_create(card, pci, pcm_channels, spdif, &codec);
+ if (err < 0)
+ goto error;
card->private_data = codec;
snd_ali_printk("mixer building ...\n");
- if ((err = snd_ali_mixer(codec)) < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_ali_mixer(codec);
+ if (err < 0)
+ goto error;
snd_ali_printk("pcm building ...\n");
- if ((err = snd_ali_build_pcms(codec)) < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_ali_build_pcms(codec);
+ if (err < 0)
+ goto error;
snd_ali_proc_init(codec);
@@ -2378,12 +2347,16 @@
card->shortname, codec->port, codec->irq);
snd_ali_printk("register card.\n");
- if ((err = snd_card_register(card)) < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_card_register(card);
+ if (err < 0)
+ goto error;
+
pci_set_drvdata(pci, card);
return 0;
+
+ error:
+ snd_card_free(card);
+ return err;
}
static void __devexit snd_ali_remove(struct pci_dev *pci)
diff --git a/sound/pci/au88x0/au88x0_sb.h b/sound/pci/au88x0/au88x0_sb.h
deleted file mode 100644
index 5a4d8fc..0000000
--- a/sound/pci/au88x0/au88x0_sb.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/***************************************************************************
- * au88x0_sb.h
- *
- * Wed Oct 29 22:10:42 2003
- *
- ****************************************************************************/
-
-#ifdef CHIP_AU8820
-/* AU8820 starting @ 64KiB offset */
-#define SBEMU_BASE 0x10000
-#else
-/* AU8810? and AU8830 starting @ 164KiB offset */
-#define SBEMU_BASE 0x29000
-#endif
-
-#define FM_A_STATUS (SBEMU_BASE + 0x00) /* read */
-#define FM_A_ADDRESS (SBEMU_BASE + 0x00) /* write */
-#define FM_A_DATA (SBEMU_BASE + 0x04)
-#define FM_B_STATUS (SBEMU_BASE + 0x08)
-#define FM_B_ADDRESS (SBEMU_BASE + 0x08)
-#define FM_B_DATA (SBEMU_BASE + 0x0C)
-#define SB_MIXER_ADDR (SBEMU_BASE + 0x10)
-#define SB_MIXER_DATA (SBEMU_BASE + 0x14)
-#define SB_RESET (SBEMU_BASE + 0x18)
-#define SB_RESET_ALIAS (SBEMU_BASE + 0x1C)
-#define FM_STATUS2 (SBEMU_BASE + 0x20)
-#define FM_ADDR2 (SBEMU_BASE + 0x20)
-#define FM_DATA2 (SBEMU_BASE + 0x24)
-#define SB_DSP_READ (SBEMU_BASE + 0x28)
-#define SB_DSP_WRITE (SBEMU_BASE + 0x30)
-#define SB_DSP_WRITE_STATUS (SBEMU_BASE + 0x30) /* bit 7 */
-#define SB_DSP_READ_STATUS (SBEMU_BASE + 0x38) /* bit 7 */
-#define SB_LACR (SBEMU_BASE + 0x40) /* ? */
-#define SB_LADCR (SBEMU_BASE + 0x44) /* ? */
-#define SB_LAMR (SBEMU_BASE + 0x48) /* ? */
-#define SB_LARR (SBEMU_BASE + 0x4C) /* ? */
-#define SB_VERSION (SBEMU_BASE + 0x50)
-#define SB_CTRLSTAT (SBEMU_BASE + 0x54)
-#define SB_TIMERSTAT (SBEMU_BASE + 0x58)
-#define FM_RAM (SBEMU_BASE + 0x100) /* 0x40 ULONG */
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 43edd28..36d3666 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1,6 +1,6 @@
/*
* azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168).
- * Copyright (C) 2002, 2005 by Andreas Mohr <andi AT lisas.de>
+ * Copyright (C) 2002, 2005, 2006, 2007 by Andreas Mohr <andi AT lisas.de>
*
* Framework borrowed from Bart Hartgers's als4000.c.
* Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801),
@@ -52,6 +52,9 @@
* - full duplex 16bit playback/record at independent sampling rate
* - MPU401 (+ legacy address support) FIXME: how to enable legacy addr??
* - game port (legacy address support)
+ * - builtin 3D enhancement (said to be YAMAHA Ymersion)
+ * - builtin DirectInput support, helps reduce CPU overhead (interrupt-driven
+ * features supported)
* - built-in General DirectX timer having a 20 bits counter
* with 1us resolution (see below!)
* - I2S serial port for external DAC
@@ -94,6 +97,10 @@
*
* BUGS
* - full-duplex might *still* be problematic, not fully tested recently
+ * - (non-bug) "Bass/Treble or 3D settings don't work" - they do get evaluated
+ * if you set PCM output switch to "pre 3D" instead of "post 3D".
+ * If this can't be set, then get a mixer application that Isn't Stupid (tm)
+ * (e.g. kmix, gamix) - unfortunately several are!!
*
* TODO
* - test MPU401 MIDI playback etc.
@@ -622,7 +629,7 @@
return (nreg != oreg);
}
-static const struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = {
+static struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata = {
AZF3328_MIXER_SWITCH("Master Playback Switch", IDX_MIXER_PLAY_MASTER, 15, 1),
AZF3328_MIXER_VOL_STEREO("Master Playback Volume", IDX_MIXER_PLAY_MASTER, 0x1f, 1),
AZF3328_MIXER_SWITCH("Wave Playback Switch", IDX_MIXER_WAVEOUT, 15, 1),
@@ -652,7 +659,7 @@
AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1),
AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8),
AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9),
- AZF3328_MIXER_ENUM("PCM", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */
+ AZF3328_MIXER_ENUM("PCM Output Route", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0),
AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0),
AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0),
@@ -678,7 +685,7 @@
#endif
};
-static const u16 __devinitdata snd_azf3328_init_values[][2] = {
+static u16 __devinitdata snd_azf3328_init_values[][2] = {
{ IDX_MIXER_PLAY_MASTER, MIXER_MUTE_MASK|0x1f1f },
{ IDX_MIXER_MODEMOUT, MIXER_MUTE_MASK|0x1f1f },
{ IDX_MIXER_BASSTREBLE, 0x0000 },
@@ -1369,7 +1376,6 @@
struct snd_azf3328 *chip = snd_pcm_substream_chip(substream);
snd_azf3328_dbgcallenter();
-
chip->playback_substream = NULL;
snd_azf3328_dbgcallleave();
return 0;
@@ -1660,10 +1666,10 @@
}
#endif
+#if DEBUG_MISC
static void
snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip)
{
-#if DEBUG_MISC
u16 tmp;
snd_azf3328_dbgmisc("codec_port 0x%lx, io2_port 0x%lx, mpu_port 0x%lx, synth_port 0x%lx, mixer_port 0x%lx, irq %d\n", chip->codec_port, chip->io2_port, chip->mpu_port, chip->synth_port, chip->mixer_port, chip->irq);
@@ -1673,10 +1679,16 @@
for (tmp=0; tmp <= 0x01; tmp += 1)
snd_azf3328_dbgmisc("0x%02x: opl 0x%04x, mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, mpu330 0x%04x\n", tmp, inb(0x388 + tmp), inb(0x300 + tmp), inb(0x310 + tmp), inb(0x320 + tmp), inb(0x330 + tmp));
- for (tmp = 0; tmp <= 0x6E; tmp += 2)
- snd_azf3328_dbgmisc("0x%02x: 0x%04x\n", tmp, snd_azf3328_codec_inb(chip, tmp));
-#endif
+ for (tmp = 0; tmp < AZF_IO_SIZE_CODEC; tmp += 2)
+ snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n", tmp, snd_azf3328_codec_inw(chip, tmp));
+
+ for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2)
+ snd_azf3328_dbgmisc("mixer 0x%02x: 0x%04x\n", tmp, snd_azf3328_mixer_inw(chip, tmp));
}
+#else
+static inline void
+snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) {}
+#endif
static int __devinit
snd_azf3328_create(struct snd_card *card,
@@ -1842,8 +1854,8 @@
#ifdef MODULE
printk(
-"azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168\n"
-"azt3328: (hardware was completely undocumented - ZERO support from Aztech).\n"
+"azt3328: Sound driver for Aztech AZF3328-based soundcards such as PCI168.\n"
+"azt3328: Hardware was completely undocumented, unfortunately.\n"
"azt3328: Feel free to contact andi AT lisas.de for bug reports etc.!\n"
"azt3328: User-scalable sequencer timer set to %dHz (1024000Hz / %d).\n",
1024000 / seqtimer_scaling, seqtimer_scaling);
diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h
index b4f3e3c..679fa99 100644
--- a/sound/pci/azt3328.h
+++ b/sound/pci/azt3328.h
@@ -106,8 +106,8 @@
#define IRQ_RECORDING 0x0002
#define IRQ_MPU401 0x0010
#define IRQ_TIMER 0x0020 /* DirectX timer */
- #define IRQ_UNKNOWN1 0x0040 /* probably unused */
- #define IRQ_UNKNOWN2 0x0080 /* probably unused */
+ #define IRQ_UNKNOWN1 0x0040 /* probably unused, or possibly I2S port? or gameport IRQ? */
+ #define IRQ_UNKNOWN2 0x0080 /* probably unused, or possibly I2S port? or gameport IRQ? */
#define IDX_IO_66H 0x66 /* writing 0xffff returns 0x0000 */
#define IDX_IO_SOME_VALUE 0x68 /* this is set to e.g. 0x3ff or 0x300, and writable; maybe some buffer limit, but I couldn't find out more, PU:0x00ff */
#define IDX_IO_6AH 0x6A /* this WORD can be set to have bits 0x0028 activated (FIXME: correct??); actually inhibits PCM playback!!! maybe power management?? */
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index e9b029e..6523ba0 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -781,6 +781,8 @@
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, 0x0070, 0x13eb, 32000),
/* Viewcast Osprey 200 */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0xff01, 44100),
+ /* ATI TV-Wonder */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1002, 0x0001, 32000),
/* Leadtek Winfast tv 2000xp delux */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, 32000),
/* Voodoo TV 200 */
@@ -833,7 +835,7 @@
pci->device, pci->subsystem_vendor, pci->subsystem_device);
snd_printk(KERN_DEBUG "please mail id, board name, and, "
"if it works, the correct digital_rate option to "
- "<alsa-devel@lists.sf.net>\n");
+ "<alsa-devel@alsa-project.org>\n");
return 32000; /* default rate */
}
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index ea6712b..48f3f17 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -775,7 +775,6 @@
struct snd_ca0106_pcm *epcm;
int channel;
int result = 0;
- struct list_head *pos;
struct snd_pcm_substream *s;
u32 basic = 0;
u32 extended = 0;
@@ -790,8 +789,7 @@
running=0;
break;
}
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
runtime = s->runtime;
epcm = runtime->private_data;
channel = epcm->channel_id;
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 2ae539b..bef1f6d 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -3107,7 +3107,7 @@
snd_printk(KERN_ERR "ERROR: snd-cs46xx: never read ISV3 & ISV4 from AC'97\n");
snd_printk(KERN_ERR " Try reloading the ALSA driver, if you find something\n");
snd_printk(KERN_ERR " broken or not working on your soundcard upon\n");
- snd_printk(KERN_ERR " this message please report to alsa-devel@lists.sourceforge.net\n");
+ snd_printk(KERN_ERR " this message please report to alsa-devel@alsa-project.org\n");
return -EIO;
#endif
diff --git a/sound/pci/cs46xx/imgs/cwcemb80.h b/sound/pci/cs46xx/imgs/cwcemb80.h
deleted file mode 100644
index a64c6ff..0000000
--- a/sound/pci/cs46xx/imgs/cwcemb80.h
+++ /dev/null
@@ -1,1607 +0,0 @@
-/* generated from cwcemb80.osp DO NOT MODIFY */
-
-#ifndef __HEADER_cwcemb80_H__
-#define __HEADER_cwcemb80_H__
-
-static struct dsp_symbol_entry cwcemb80_symbols[] = {
- { 0x0000, "BEGINADDRESS",0x00 },
- { 0x8000, "EXECCHILD",0x03 },
- { 0x8001, "EXECCHILD_98",0x03 },
- { 0x8003, "EXECCHILD_PUSH1IND",0x03 },
- { 0x8008, "EXECSIBLING",0x03 },
- { 0x800a, "EXECSIBLING_298",0x03 },
- { 0x800b, "EXECSIBLING_2IND1",0x03 },
- { 0x8010, "TIMINGMASTER",0x03 },
- { 0x804f, "S16_CODECINPUTTASK",0x03 },
- { 0x805e, "PCMSERIALINPUTTASK",0x03 },
- { 0x806d, "S16_MIX_TO_OSTREAM",0x03 },
- { 0x809a, "S16_MIX",0x03 },
- { 0x80bb, "S16_UPSRC",0x03 },
- { 0x813b, "MIX3_EXP",0x03 },
- { 0x8164, "DECIMATEBYPOW2",0x03 },
- { 0x8197, "VARIDECIMATE",0x03 },
- { 0x81f2, "_3DINPUTTASK",0x03 },
- { 0x820a, "_3DPRLGCINPTASK",0x03 },
- { 0x8227, "_3DSTEREOINPUTTASK",0x03 },
- { 0x8242, "_3DOUTPUTTASK",0x03 },
- { 0x82c4, "HRTF_MORPH_TASK",0x03 },
- { 0x82c6, "WAIT4DATA",0x03 },
- { 0x82fa, "PROLOGIC",0x03 },
- { 0x8496, "DECORRELATOR",0x03 },
- { 0x84a4, "STEREO2MONO",0x03 },
- { 0x0070, "SPOSCB",0x02 },
- { 0x0105, "TASKTREETHREAD",0x03 },
- { 0x0136, "TASKTREEHEADERCODE",0x03 },
- { 0x013f, "FGTASKTREEHEADERCODE",0x03 },
- { 0x0163, "NULLALGORITHM",0x03 },
- { 0x0167, "HFGEXECCHILD",0x03 },
- { 0x0168, "HFGEXECCHILD_98",0x03 },
- { 0x016a, "HFGEXECCHILD_PUSH1IND",0x03 },
- { 0x016d, "HFGEXECSIBLING",0x03 },
- { 0x016f, "HFGEXECSIBLING_298",0x03 },
- { 0x0170, "HFGEXECSIBLING_2IND1",0x03 },
- { 0x0173, "S16_CODECOUTPUTTASK",0x03 },
- { 0x018e, "#CODE_END",0x00 },
-}; /* cwcemb80 symbols */
-
-static u32 cwcemb80_code[] = {
-/* BEGINADDRESS */
-/* 0000 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0002 */ 0x00001705,0x00001400,0x000a411e,0x00001003,
-/* 0004 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0006 */ 0x00009705,0x00001400,0x000a411e,0x00001003,
-/* 0008 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 000A */ 0x00011705,0x00001400,0x000a411e,0x00001003,
-/* 000C */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 000E */ 0x00019705,0x00001400,0x000a411e,0x00001003,
-/* 0010 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0012 */ 0x00021705,0x00001400,0x000a411e,0x00001003,
-/* 0014 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 0016 */ 0x00029705,0x00001400,0x000a411e,0x00001003,
-/* 0018 */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 001A */ 0x00031705,0x00001400,0x000a411e,0x00001003,
-/* 001C */ 0x00040730,0x00001002,0x000f619e,0x00001003,
-/* 001E */ 0x00039705,0x00001400,0x000a411e,0x00001003,
-/* 0020 */ 0x000fe19e,0x00001003,0x0009c730,0x00001003,
-/* 0022 */ 0x0008e19c,0x00001003,0x000083c1,0x00093040,
-/* 0024 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 0026 */ 0x00009705,0x00001400,0x000a211e,0x00001003,
-/* 0028 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 002A */ 0x00011705,0x00001400,0x000a211e,0x00001003,
-/* 002C */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 002E */ 0x00019705,0x00001400,0x000a211e,0x00001003,
-/* 0030 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 0032 */ 0x00021705,0x00001400,0x000a211e,0x00001003,
-/* 0034 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 0036 */ 0x00029705,0x00001400,0x000a211e,0x00001003,
-/* 0038 */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 003A */ 0x00031705,0x00001400,0x000a211e,0x00001003,
-/* 003C */ 0x00098730,0x00001002,0x000ee19e,0x00001003,
-/* 003E */ 0x00039705,0x00001400,0x000a211e,0x00001003,
-/* 0040 */ 0x0000a730,0x00001008,0x000e2730,0x00001002,
-/* 0042 */ 0x0000a731,0x00001002,0x0000a731,0x00001002,
-/* 0044 */ 0x0000a731,0x00001002,0x0000a731,0x00001002,
-/* 0046 */ 0x0000a731,0x00001002,0x0000a731,0x00001002,
-/* 0048 */ 0x00000000,0x00000000,0x000f619c,0x00001003,
-/* 004A */ 0x0007f801,0x000c0000,0x00000037,0x00001000,
-/* 004C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 004E */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0050 */ 0x00000000,0x000c0000,0x00000000,0x00000000,
-/* 0052 */ 0x0000373c,0x00001000,0x00000000,0x00000000,
-/* 0054 */ 0x000ee19c,0x00001003,0x0007f801,0x000c0000,
-/* 0056 */ 0x00000037,0x00001000,0x00000000,0x00000000,
-/* 0058 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 005A */ 0x00000000,0x00000000,0x0000273c,0x00001000,
-/* 005C */ 0x00000033,0x00001000,0x000e679e,0x00001003,
-/* 005E */ 0x00007705,0x00001400,0x000ac71e,0x00001003,
-/* 0060 */ 0x00087fc1,0x000c3be0,0x0007f801,0x000c0000,
-/* 0062 */ 0x00000037,0x00001000,0x00000000,0x00000000,
-/* 0064 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0066 */ 0x00000000,0x00000000,0x0000a730,0x00001003,
-/* 0068 */ 0x00000033,0x00001000,0x0007f801,0x000c0000,
-/* 006A */ 0x00000037,0x00001000,0x00000000,0x00000000,
-/* 006C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 006E */ 0x00000000,0x00000000,0x00000000,0x000c0000,
-/* 0070 */ 0x00000032,0x00001000,0x0000273d,0x00001000,
-/* 0072 */ 0x0004a730,0x00001003,0x00000f41,0x00097140,
-/* 0074 */ 0x0000a841,0x0009b240,0x0000a0c1,0x0009f040,
-/* 0076 */ 0x0001c641,0x00093540,0x0001cec1,0x0009b5c0,
-/* 0078 */ 0x00000000,0x00000000,0x0001bf05,0x0003fc40,
-/* 007A */ 0x00002725,0x000aa400,0x00013705,0x00093a00,
-/* 007C */ 0x0000002e,0x0009d6c0,0x00038630,0x00001004,
-/* 007E */ 0x0004ef0a,0x000eb785,0x0003fc8a,0x00000000,
-/* 0080 */ 0x00000000,0x000c70e0,0x0007d182,0x0002c640,
-/* 0082 */ 0x00000630,0x00001004,0x000799b8,0x0002c6c0,
-/* 0084 */ 0x00031705,0x00092240,0x00039f05,0x000932c0,
-/* 0086 */ 0x0003520a,0x00000000,0x00040731,0x0000100b,
-/* 0088 */ 0x00010705,0x000b20c0,0x00000000,0x000eba44,
-/* 008A */ 0x00032108,0x000c60c4,0x00065208,0x000c2917,
-/* 008C */ 0x000406b0,0x00001007,0x00012f05,0x00036880,
-/* 008E */ 0x0002818e,0x000c0000,0x0004410a,0x00000000,
-/* 0090 */ 0x00040630,0x00001007,0x00029705,0x000c0000,
-/* 0092 */ 0x00000000,0x00000000,0x00003fc1,0x0003fc40,
-/* 0094 */ 0x000037c1,0x00091b40,0x00003fc1,0x000911c0,
-/* 0096 */ 0x000037c1,0x000957c0,0x00003fc1,0x000951c0,
-/* 0098 */ 0x000037c1,0x00000000,0x00003fc1,0x000991c0,
-/* 009A */ 0x000037c1,0x00000000,0x00003fc1,0x0009d1c0,
-/* 009C */ 0x000037c1,0x00000000,0x0001ccc1,0x000915c0,
-/* 009E */ 0x0001c441,0x0009d800,0x0009cdc1,0x00091240,
-/* 00A0 */ 0x0001c541,0x00091d00,0x0009cfc1,0x00095240,
-/* 00A2 */ 0x0001c741,0x00095c80,0x000e8ca9,0x00099240,
-/* 00A4 */ 0x000e85ad,0x00095640,0x00069ca9,0x00099d80,
-/* 00A6 */ 0x000e952d,0x00099640,0x000eaca9,0x0009d6c0,
-/* 00A8 */ 0x000ea5ad,0x00091a40,0x0006bca9,0x0009de80,
-/* 00AA */ 0x000eb52d,0x00095a40,0x000ecca9,0x00099ac0,
-/* 00AC */ 0x000ec5ad,0x0009da40,0x000edca9,0x0009d300,
-/* 00AE */ 0x000a6e0a,0x00001000,0x000ed52d,0x00091e40,
-/* 00B0 */ 0x000eeca9,0x00095ec0,0x000ee5ad,0x00099e40,
-/* 00B2 */ 0x0006fca9,0x00002500,0x000fb208,0x000c59a0,
-/* 00B4 */ 0x000ef52d,0x0009de40,0x00068ca9,0x000912c1,
-/* 00B6 */ 0x000683ad,0x00095241,0x00020f05,0x000991c1,
-/* 00B8 */ 0x00000000,0x00000000,0x00086f88,0x00001000,
-/* 00BA */ 0x0009cf81,0x000b5340,0x0009c701,0x000b92c0,
-/* 00BC */ 0x0009de81,0x000bd300,0x0009d601,0x000b1700,
-/* 00BE */ 0x0001fd81,0x000b9d80,0x0009f501,0x000b57c0,
-/* 00C0 */ 0x000a0f81,0x000bd740,0x00020701,0x000b5c80,
-/* 00C2 */ 0x000a1681,0x000b97c0,0x00021601,0x00002500,
-/* 00C4 */ 0x000a0701,0x000b9b40,0x000a0f81,0x000b1bc0,
-/* 00C6 */ 0x00021681,0x00002d00,0x00020f81,0x000bd800,
-/* 00C8 */ 0x000a0701,0x000b5bc0,0x00021601,0x00003500,
-/* 00CA */ 0x000a0f81,0x000b5f40,0x000a0701,0x000bdbc0,
-/* 00CC */ 0x00021681,0x00003d00,0x00020f81,0x000b1d00,
-/* 00CE */ 0x000a0701,0x000b1fc0,0x00021601,0x00020500,
-/* 00D0 */ 0x00020f81,0x000b1341,0x000a0701,0x000b9fc0,
-/* 00D2 */ 0x00021681,0x00020d00,0x00020f81,0x000bde80,
-/* 00D4 */ 0x000a0701,0x000bdfc0,0x00021601,0x00021500,
-/* 00D6 */ 0x00020f81,0x000b9341,0x00020701,0x000b53c1,
-/* 00D8 */ 0x00021681,0x00021d00,0x000a0f81,0x000d0380,
-/* 00DA */ 0x0000b601,0x000b15c0,0x00007b01,0x00000000,
-/* 00DC */ 0x00007b81,0x000bd1c0,0x00007b01,0x00000000,
-/* 00DE */ 0x00007b81,0x000b91c0,0x00007b01,0x000b57c0,
-/* 00E0 */ 0x00007b81,0x000b51c0,0x00007b01,0x000b1b40,
-/* 00E2 */ 0x00007b81,0x000b11c0,0x00087b01,0x000c3dc0,
-/* 00E4 */ 0x0007e488,0x000d7e45,0x00000000,0x000d7a44,
-/* 00E6 */ 0x0007e48a,0x00000000,0x00011f05,0x00084080,
-/* 00E8 */ 0x00000000,0x00000000,0x00001705,0x000b3540,
-/* 00EA */ 0x00008a01,0x000bf040,0x00007081,0x000bb5c0,
-/* 00EC */ 0x00055488,0x00000000,0x0000d482,0x0003fc40,
-/* 00EE */ 0x0003fc88,0x00000000,0x0001e401,0x000b3a00,
-/* 00F0 */ 0x0001ec81,0x000bd6c0,0x0004ef08,0x000eb784,
-/* 00F2 */ 0x000c86b0,0x00001007,0x00008281,0x000bb240,
-/* 00F4 */ 0x0000b801,0x000b7140,0x00007888,0x00000000,
-/* 00F6 */ 0x0000073c,0x00001000,0x0007f188,0x000c0000,
-/* 00F8 */ 0x00000000,0x00000000,0x00055288,0x000c555c,
-/* 00FA */ 0x0005528a,0x000c0000,0x0009fa88,0x000c5d00,
-/* 00FC */ 0x0000fa88,0x00000000,0x00000032,0x00001000,
-/* 00FE */ 0x0000073d,0x00001000,0x0007f188,0x000c0000,
-/* 0100 */ 0x00000000,0x00000000,0x0008c01c,0x00001003,
-/* 0102 */ 0x00002705,0x00001008,0x0008b201,0x000c1392,
-/* 0104 */ 0x0000ba01,0x00000000,
-/* TASKTREETHREAD */
-/* 0105 */ 0x00008731,0x00001400,0x0004c108,0x000fe0c4,
-/* 0107 */ 0x00057488,0x00000000,0x000a6388,0x00001001,
-/* 0109 */ 0x0008b334,0x000bc141,0x0003020e,0x00000000,
-/* 010B */ 0x000886b0,0x00001008,0x00003625,0x000c5dfa,
-/* 010D */ 0x000a638a,0x00001001,0x0008020e,0x00001002,
-/* 010F */ 0x0008a6b0,0x00001008,0x0007f301,0x00000000,
-/* 0111 */ 0x00000000,0x00000000,0x00002725,0x000a8c40,
-/* 0113 */ 0x000000ae,0x00000000,0x000d8630,0x00001008,
-/* 0115 */ 0x00000000,0x000c74e0,0x0007d182,0x0002d640,
-/* 0117 */ 0x000a8630,0x00001008,0x000799b8,0x0002d6c0,
-/* 0119 */ 0x0000748a,0x000c3ec5,0x0007420a,0x000c0000,
-/* 011B */ 0x00062208,0x000c4117,0x00070630,0x00001009,
-/* 011D */ 0x00000000,0x000c0000,0x0001022e,0x00000000,
-/* 011F */ 0x0003a630,0x00001009,0x00000000,0x000c0000,
-/* 0121 */ 0x00000036,0x00001000,0x00000000,0x00000000,
-/* 0123 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0125 */ 0x00000000,0x00000000,0x0002a730,0x00001008,
-/* 0127 */ 0x0007f801,0x000c0000,0x00000037,0x00001000,
-/* 0129 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 012B */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 012D */ 0x0002a730,0x00001008,0x00000033,0x00001000,
-/* 012F */ 0x0002a705,0x00001008,0x00007a01,0x000c0000,
-/* 0131 */ 0x000e6288,0x000d550a,0x0006428a,0x00000000,
-/* 0133 */ 0x00060730,0x0000100a,0x00000000,0x000c0000,
-/* 0135 */ 0x00000000,0x00000000,
-/* TASKTREEHEADERCODE */
-/* 0136 */ 0x0007aab0,0x00034880,0x00078fb0,0x0000100b,
-/* 0138 */ 0x00057488,0x00000000,0x00033b94,0x00081140,
-/* 013A */ 0x000183ae,0x00000000,0x000786b0,0x0000100b,
-/* 013C */ 0x00022f05,0x000c3545,0x0000eb8a,0x00000000,
-/* 013E */ 0x00042731,0x00001003,
-/* FGTASKTREEHEADERCODE */
-/* 013F */ 0x0007aab0,0x00034880,0x00048fb0,0x0000100a,
-/* 0141 */ 0x00057488,0x00000000,0x00033b94,0x00081140,
-/* 0143 */ 0x000183ae,0x00000000,0x000806b0,0x0000100b,
-/* 0145 */ 0x00022f05,0x00000000,0x00007401,0x00091140,
-/* 0147 */ 0x00048f05,0x000951c0,0x00042731,0x00001003,
-/* 0149 */ 0x0000473d,0x00001000,0x000f19b0,0x000bbc47,
-/* 014B */ 0x00080000,0x000bffc7,0x000fe19e,0x00001003,
-/* 014D */ 0x00000000,0x00000000,0x0008e19c,0x00001003,
-/* 014F */ 0x000083c1,0x00093040,0x00000f41,0x00097140,
-/* 0151 */ 0x0000a841,0x0009b240,0x0000a0c1,0x0009f040,
-/* 0153 */ 0x0001c641,0x00093540,0x0001cec1,0x0009b5c0,
-/* 0155 */ 0x00000000,0x000fdc44,0x00055208,0x00000000,
-/* 0157 */ 0x00010705,0x000a2880,0x0000a23a,0x00093a00,
-/* 0159 */ 0x0003fc8a,0x000df6c5,0x0004ef0a,0x000c0000,
-/* 015B */ 0x00012f05,0x00036880,0x00065308,0x000c2997,
-/* 015D */ 0x000d86b0,0x0000100a,0x0004410a,0x000d40c7,
-/* 015F */ 0x00000000,0x00000000,0x00080730,0x00001004,
-/* 0161 */ 0x00056f0a,0x000ea105,0x00000000,0x00000000,
-/* NULLALGORITHM */
-/* 0163 */ 0x0000473d,0x00001000,0x000f19b0,0x000bbc47,
-/* 0165 */ 0x00080000,0x000bffc7,0x0000273d,0x00001000,
-/* HFGEXECCHILD */
-/* 0167 */ 0x00000000,0x000eba44,
-/* HFGEXECCHILD_98 */
-/* 0168 */ 0x00048f05,0x0000f440,0x00007401,0x0000f7c0,
-/* HFGEXECCHILD_PUSH1IND */
-/* 016A */ 0x00000734,0x00001000,0x00010705,0x000a6880,
-/* 016C */ 0x00006a88,0x000c75c4,
-/* HFGEXECSIBLING */
-/* 016D */ 0x00000000,0x000e5084,0x00000000,0x000eba44,
-/* HFGEXECSIBLING_298 */
-/* 016F */ 0x00087401,0x000e4782,
-/* HFGEXECSIBLING_2IND1 */
-/* 0170 */ 0x00000734,0x00001000,0x00010705,0x000a6880,
-/* 0172 */ 0x00006a88,0x000c75c4,
-/* S16_CODECOUTPUTTASK */
-/* 0173 */ 0x0007c108,0x000c0000,0x0007e721,0x000bed40,
-/* 0175 */ 0x00005f25,0x000badc0,0x0003ba97,0x000beb80,
-/* 0177 */ 0x00065590,0x000b2e00,0x00033217,0x00003ec0,
-/* 0179 */ 0x00065590,0x000b8e40,0x0003ed80,0x000491c0,
-/* 017B */ 0x00073fb0,0x00074c80,0x000283a0,0x0000100c,
-/* 017D */ 0x000ee388,0x00042970,0x00008301,0x00021ef2,
-/* 017F */ 0x000b8f14,0x0000000f,0x000c4d8d,0x0000001b,
-/* 0181 */ 0x000d6dc2,0x000e06c6,0x000032ac,0x000c3916,
-/* 0183 */ 0x0004edc2,0x00074c80,0x00078898,0x00001000,
-/* 0185 */ 0x00038894,0x00000032,0x000c4d8d,0x00092e1b,
-/* 0187 */ 0x000d6dc2,0x000e06c6,0x0004edc2,0x000c1956,
-/* 0189 */ 0x0000722c,0x00034a00,0x00041705,0x0009ed40,
-/* 018B */ 0x00058730,0x00001400,0x000d7488,0x000c3a00,
-/* 018D */ 0x00048f05,0x00000000
-};
-/* #CODE_END */
-
-static u32 cwcemb80_parameter[] = {
-/* 0000 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0004 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0008 */ 0x00000000,0x00000000,0x00000163,0x00000000,
-/* 000C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0010 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0014 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0018 */ 0x00000000,0x00200040,0x00008010,0x00000000,
-/* 001C */ 0x00000000,0x80000001,0x00000001,0x00060000,
-/* 0020 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0024 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0028 */ 0x00000000,0x00900080,0x00000173,0x00000000,
-/* 002C */ 0x00000000,0x00000010,0x00800000,0x00900000,
-/* 0030 */ 0xf2c0000f,0x00000200,0x00000000,0x00010600,
-/* 0034 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0038 */ 0x00000000,0x00000000,0x00000163,0x330300c2,
-/* 003C */ 0x06000000,0x00000000,0x80008000,0x80008000,
-/* 0040 */ 0x3fc0000f,0x00000301,0x00010400,0x00000000,
-/* 0044 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0048 */ 0x00000000,0x00b00000,0x00d0806d,0x330480c3,
-/* 004C */ 0x04800000,0x00000001,0x00800001,0x0000ffff,
-/* 0050 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0054 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0058 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 005C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0060 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0064 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0068 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 006C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0070 */ 0x066a0600,0x06350070,0x0000929d,0x929d929d,
-/* 0074 */ 0x00000000,0x0000735a,0x00000600,0x00000000,
-/* 0078 */ 0x929d735a,0x00000000,0x00010000,0x735a735a,
-/* 007C */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0080 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0084 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0088 */ 0x00000000,0x00000000,0x0000804f,0x000000c3,
-/* 008C */ 0x05000000,0x00a00010,0x00000000,0x80008000,
-/* 0090 */ 0x00000000,0x00000000,0x00000700,0x00000000,
-/* 0094 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0098 */ 0x00000080,0x00a00000,0x0000809a,0x000000c2,
-/* 009C */ 0x07400000,0x00000000,0x80008000,0xffffffff,
-/* 00A0 */ 0x00c80028,0x00005555,0x00000000,0x000107a0,
-/* 00A4 */ 0x00c80028,0x000000c2,0x06800000,0x00000000,
-/* 00A8 */ 0x06e00080,0x00300000,0x000080bb,0x000000c9,
-/* 00AC */ 0x07a00000,0x04000000,0x80008000,0xffffffff,
-/* 00B0 */ 0x00c80028,0x00005555,0x00000000,0x00000780,
-/* 00B4 */ 0x00c80028,0x000000c5,0xff800000,0x00000000,
-/* 00B8 */ 0x00640080,0x00c00000,0x00008197,0x000000c9,
-/* 00BC */ 0x07800000,0x04000000,0x80008000,0xffffffff,
-/* 00C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00C8 */ 0x00000000,0x00000000,0x0000805e,0x000000c1,
-/* 00CC */ 0x00000000,0x00800000,0x80008000,0x80008000,
-/* 00D0 */ 0x00020000,0x0000ffff,0x00000000,0x00000000,
-/* 00D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0100 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0104 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0108 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 010C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0110 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0114 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0118 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 011C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0120 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0124 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0128 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 012C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0130 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0134 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0138 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 013C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0140 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0144 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0148 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 014C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0150 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0154 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0158 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 015C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0160 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0164 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0168 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 016C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0170 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0174 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0178 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 017C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0180 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0184 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0188 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 018C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0190 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0194 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0198 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 019C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0200 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0204 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0208 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 020C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0210 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0214 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0218 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 021C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0220 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0224 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0228 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 022C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0230 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0234 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0238 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 023C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0240 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0244 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0248 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 024C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0250 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0254 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0258 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 025C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0260 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0264 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0268 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 026C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0270 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0274 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0278 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 027C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0280 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0284 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0288 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 028C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0290 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0294 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0298 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 029C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0300 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0304 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0308 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 030C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0310 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0314 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0318 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 031C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0320 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0324 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0328 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 032C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0330 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0334 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0338 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 033C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0340 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0344 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0348 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 034C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0350 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0354 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0358 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 035C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0360 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0364 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0368 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 036C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0370 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0374 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0378 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 037C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0380 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0384 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0388 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 038C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0390 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0394 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0398 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 039C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0400 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0404 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0408 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 040C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0410 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0414 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0418 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 041C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0420 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0424 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0428 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 042C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0430 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0434 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0438 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 043C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0440 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0444 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0448 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 044C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0450 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0454 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0458 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 045C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0460 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0464 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0468 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 046C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0470 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0474 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0478 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 047C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0480 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0484 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0488 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 048C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0490 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0494 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0498 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 049C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0500 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0504 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0508 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 050C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0510 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0514 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0518 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 051C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0520 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0524 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0528 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 052C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0530 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0534 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0538 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 053C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0540 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0544 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0548 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 054C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0550 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0554 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0558 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 055C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0560 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0564 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0568 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 056C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0570 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0574 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0578 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 057C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0580 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0584 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0588 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 058C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0590 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0594 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0598 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 059C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0600 */ 0x929d0600,0x929d929d,0x929d929d,0x929d0000,
-/* 0604 */ 0x929d929d,0x929d929d,0x929d929d,0x929d929d,
-/* 0608 */ 0x929d929d,0x00100635,0x060b013f,0x00000004,
-/* 060C */ 0x00000001,0x007a0002,0x00000000,0x066e0610,
-/* 0610 */ 0x0105929d,0x929d929d,0x929d929d,0x929d929d,
-/* 0614 */ 0x929d929d,0xa431ac75,0x0001735a,0xa431ac75,
-/* 0618 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 061C */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0620 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0624 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0628 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 062C */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0630 */ 0xa431ac75,0xa431ac75,0xa431ac75,0x735a0051,
-/* 0634 */ 0x00000000,0x929d929d,0x929d929d,0x929d929d,
-/* 0638 */ 0x929d929d,0x929d929d,0x929d929d,0x929d929d,
-/* 063C */ 0x929d929d,0x929d929d,0x00000000,0x06400136,
-/* 0640 */ 0x0000270f,0x00010000,0x007a0000,0x00000000,
-/* 0644 */ 0x068e0645,0x0105929d,0x929d929d,0x929d929d,
-/* 0648 */ 0x929d929d,0x929d929d,0xa431ac75,0x0001735a,
-/* 064C */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0650 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0654 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0658 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 065C */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0660 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0664 */ 0xa431ac75,0xa431ac75,0xa431ac75,0xa431ac75,
-/* 0668 */ 0x735a0100,0x00000000,0x00000000,0x00000000,
-/* 066C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0670 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0674 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0678 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 067C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0680 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0684 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0688 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 068C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0690 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0694 */ 0x00000000,0x00000000,0x00000000
-}; /* #PARAMETER_END */
-
-static u32 cwcemb80_sample[] = {
-/* 0000 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0004 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0008 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 000C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0010 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0014 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0018 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 001C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0020 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0024 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0028 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 002C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0030 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0034 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0038 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 003C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0040 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0044 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0048 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 004C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0050 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0054 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0058 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 005C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0060 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0064 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0068 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 006C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0070 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0074 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0078 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 007C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0080 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0084 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0088 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 008C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0090 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0094 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0098 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 009C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 00FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0100 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0104 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0108 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 010C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0110 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0114 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0118 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 011C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0120 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0124 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0128 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 012C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0130 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0134 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0138 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 013C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0140 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0144 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0148 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 014C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0150 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0154 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0158 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 015C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0160 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0164 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0168 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 016C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0170 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0174 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0178 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 017C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0180 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0184 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0188 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 018C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0190 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0194 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0198 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 019C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 01FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0200 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0204 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0208 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 020C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0210 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0214 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0218 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 021C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0220 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0224 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0228 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 022C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0230 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0234 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0238 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 023C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0240 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0244 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0248 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 024C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0250 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0254 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0258 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 025C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0260 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0264 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0268 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 026C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0270 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0274 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0278 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 027C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0280 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0284 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0288 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 028C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0290 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0294 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0298 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 029C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 02FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0300 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0304 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0308 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 030C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0310 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0314 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0318 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 031C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0320 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0324 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0328 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 032C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0330 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0334 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0338 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 033C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0340 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0344 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0348 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 034C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0350 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0354 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0358 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 035C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0360 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0364 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0368 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 036C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0370 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0374 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0378 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 037C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0380 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0384 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0388 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 038C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0390 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0394 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0398 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 039C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 03FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0400 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0404 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0408 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 040C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0410 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0414 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0418 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 041C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0420 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0424 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0428 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 042C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0430 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0434 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0438 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 043C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0440 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0444 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0448 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 044C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0450 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0454 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0458 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 045C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0460 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0464 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0468 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 046C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0470 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0474 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0478 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 047C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0480 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0484 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0488 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 048C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0490 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0494 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0498 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 049C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 04FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0500 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0504 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0508 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 050C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0510 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0514 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0518 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 051C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0520 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0524 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0528 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 052C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0530 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0534 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0538 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 053C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0540 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0544 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0548 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 054C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0550 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0554 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0558 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 055C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0560 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0564 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0568 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 056C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0570 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0574 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0578 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 057C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0580 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0584 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0588 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 058C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0590 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0594 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0598 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 059C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 05FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0600 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0604 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0608 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 060C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0610 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0614 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0618 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 061C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0620 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0624 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0628 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 062C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0630 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0634 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0638 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 063C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0640 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0644 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0648 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 064C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0650 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0654 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0658 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 065C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0660 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0664 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0668 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 066C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0670 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0674 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0678 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 067C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0680 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0684 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0688 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 068C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0690 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0694 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0698 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 069C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 06FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0700 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0704 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0708 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 070C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0710 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0714 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0718 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 071C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0720 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0724 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0728 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 072C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0730 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0734 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0738 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 073C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0740 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0744 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0748 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 074C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0750 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0754 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0758 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 075C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0760 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0764 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0768 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 076C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0770 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0774 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0778 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 077C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0780 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0784 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0788 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 078C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0790 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0794 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0798 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 079C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 07FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0800 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0804 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0808 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 080C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0810 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0814 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0818 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 081C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0820 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0824 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0828 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 082C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0830 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0834 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0838 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 083C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0840 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0844 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0848 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 084C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0850 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0854 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0858 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 085C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0860 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0864 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0868 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 086C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0870 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0874 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0878 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 087C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0880 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0884 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0888 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 088C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0890 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0894 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0898 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 089C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 08FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0900 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0904 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0908 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 090C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0910 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0914 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0918 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 091C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0920 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0924 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0928 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 092C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0930 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0934 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0938 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 093C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0940 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0944 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0948 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 094C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0950 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0954 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0958 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 095C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0960 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0964 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0968 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 096C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0970 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0974 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0978 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 097C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0980 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0984 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0988 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 098C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0990 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0994 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0998 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 099C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09A0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09A4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09A8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09AC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09B0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09B4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09B8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09BC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09C0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09C4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09C8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09CC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09D0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09D4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09D8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09DC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09E0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09E4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09E8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09EC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09F0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09F4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09F8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 09FC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A00 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A04 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A08 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A0C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A10 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A14 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A18 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A1C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A20 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A24 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A28 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A2C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A30 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A34 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A38 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A3C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A40 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A44 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A48 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A4C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A50 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A54 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A58 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A5C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A60 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A64 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A68 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A6C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A70 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A74 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A78 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A7C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A80 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A84 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A88 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A8C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A90 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A94 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A98 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0A9C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AA0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AA4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AA8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AAC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AB0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AB4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AB8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0ABC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AC0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AC4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AC8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0ACC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AD0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AD4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AD8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0ADC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AE0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AE4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AE8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AEC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AF0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AF4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AF8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0AFC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B00 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B04 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B08 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B0C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B10 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B14 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B18 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B1C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B20 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B24 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B28 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B2C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B30 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B34 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B38 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B3C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B40 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B44 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B48 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B4C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B50 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B54 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B58 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B5C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B60 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B64 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B68 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B6C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B70 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B74 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B78 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B7C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B80 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B84 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B88 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B8C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B90 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B94 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B98 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0B9C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BA0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BA4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BA8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BAC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BB0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BB4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BB8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BBC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BC0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BC4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BC8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BCC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BD0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BD4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BD8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BDC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BE0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BE4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BE8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BEC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BF0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BF4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BF8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0BFC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C00 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C04 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C08 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C0C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C10 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C14 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C18 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C1C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C20 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C24 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C28 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C2C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C30 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C34 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C38 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C3C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C40 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C44 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C48 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C4C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C50 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C54 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C58 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C5C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C60 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C64 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C68 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C6C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C70 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C74 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C78 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C7C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C80 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C84 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C88 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C8C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C90 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C94 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C98 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0C9C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CA0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CA4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CA8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CAC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CB0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CB4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CB8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CBC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CC0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CC4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CC8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CCC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CD0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CD4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CD8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CDC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CE0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CE4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CE8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CEC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CF0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CF4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CF8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0CFC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D00 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D04 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D08 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D0C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D10 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D14 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D18 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D1C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D20 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D24 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D28 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D2C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D30 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D34 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D38 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D3C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D40 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D44 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D48 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D4C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D50 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D54 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D58 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D5C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D60 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D64 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D68 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D6C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D70 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D74 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D78 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D7C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D80 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D84 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D88 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D8C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D90 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D94 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D98 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0D9C */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DA0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DA4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DA8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DAC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DB0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DB4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DB8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DBC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DC0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DC4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DC8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DCC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DD0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DD4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DD8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DDC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DE0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DE4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DE8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DEC */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DF0 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DF4 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DF8 */ 0x00000000,0x00000000,0x00000000,0x00000000,
-/* 0DFC */ 0x00000000,0x00000000,0x00000000,0x00010004
-}; /* #SAMPLE_END */
-
-
-static struct dsp_segment_desc cwcemb80_segments[] = {
- { SEGTYPE_SP_PROGRAM, 0x00000000, 0x0000031c, cwcemb80_code },
- { SEGTYPE_SP_PARAMETER, 0x00000000, 0x00000697, cwcemb80_parameter },
- { SEGTYPE_SP_SAMPLE, 0x00000000, 0x00000e00, cwcemb80_sample },
-};
-
-static struct dsp_module_desc cwcemb80_module = {
- "cwcemb80",
- {
- 38,
- cwcemb80_symbols
- },
- 3,
- cwcemb80_segments,
-};
-
-#endif /* __HEADER_cwcemb80_H__ */
diff --git a/sound/pci/echoaudio/darla20.c b/sound/pci/echoaudio/darla20.c
index 8e7fe03..87078d3 100644
--- a/sound/pci/echoaudio/darla20.c
+++ b/sound/pci/echoaudio/darla20.c
@@ -56,6 +56,8 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/darla20_dsp.fw");
+
#define FW_DARLA20_DSP 0
static const struct firmware card_fw[] = {
diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
index a13c623..42b48f9 100644
--- a/sound/pci/echoaudio/darla24.c
+++ b/sound/pci/echoaudio/darla24.c
@@ -60,6 +60,8 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/darla24_dsp.fw");
+
#define FW_DARLA24_DSP 0
static const struct firmware card_fw[] = {
diff --git a/sound/pci/echoaudio/echo3g.c b/sound/pci/echoaudio/echo3g.c
index 8fb1582..8dbb7ac 100644
--- a/sound/pci/echoaudio/echo3g.c
+++ b/sound/pci/echoaudio/echo3g.c
@@ -68,6 +68,10 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/echo3g_dsp.fw");
+MODULE_FIRMWARE("ea/3g_asic.fw");
+
#define FW_361_LOADER 0
#define FW_ECHO3G_DSP 1
#define FW_3G_ASIC 2
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index e413da0..f27b6a7 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -705,11 +705,9 @@
struct audiopipe *pipe = runtime->private_data;
int i, err;
u32 channelmask = 0;
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
for (i = 0; i < DSP_MAXPIPES; i++) {
if (s == chip->substream[i]) {
channelmask |= 1 << i;
diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c
index 9f439ea..52a9331 100644
--- a/sound/pci/echoaudio/echoaudio_3g.c
+++ b/sound/pci/echoaudio/echoaudio_3g.c
@@ -233,8 +233,8 @@
chip->asic_code = &card_fw[FW_3G_ASIC];
- /* Now give the new ASIC a little time to set up */
- mdelay(2);
+ /* Now give the new ASIC some time to set up */
+ msleep(1000);
/* See if it worked */
box_type = check_asic_status(chip);
diff --git a/sound/pci/echoaudio/gina20.c b/sound/pci/echoaudio/gina20.c
index af4d320..fee2d48 100644
--- a/sound/pci/echoaudio/gina20.c
+++ b/sound/pci/echoaudio/gina20.c
@@ -60,6 +60,8 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/gina20_dsp.fw");
+
#define FW_GINA20_DSP 0
static const struct firmware card_fw[] = {
diff --git a/sound/pci/echoaudio/gina24.c b/sound/pci/echoaudio/gina24.c
index 9ff454a..d5eae47 100644
--- a/sound/pci/echoaudio/gina24.c
+++ b/sound/pci/echoaudio/gina24.c
@@ -66,6 +66,12 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/gina24_301_dsp.fw");
+MODULE_FIRMWARE("ea/gina24_361_dsp.fw");
+MODULE_FIRMWARE("ea/gina24_301_asic.fw");
+MODULE_FIRMWARE("ea/gina24_361_asic.fw");
+
#define FW_361_LOADER 0
#define FW_GINA24_301_DSP 1
#define FW_GINA24_361_DSP 2
diff --git a/sound/pci/echoaudio/indigo.c b/sound/pci/echoaudio/indigo.c
index 37eb726..40f601c 100644
--- a/sound/pci/echoaudio/indigo.c
+++ b/sound/pci/echoaudio/indigo.c
@@ -58,6 +58,9 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_dsp.fw");
+
#define FW_361_LOADER 0
#define FW_INDIGO_DSP 1
diff --git a/sound/pci/echoaudio/indigodj.c b/sound/pci/echoaudio/indigodj.c
index dc8b918..771c538 100644
--- a/sound/pci/echoaudio/indigodj.c
+++ b/sound/pci/echoaudio/indigodj.c
@@ -58,6 +58,9 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_dj_dsp.fw");
+
#define FW_361_LOADER 0
#define FW_INDIGO_DJ_DSP 1
diff --git a/sound/pci/echoaudio/indigoio.c b/sound/pci/echoaudio/indigoio.c
index eadf326..49c550d 100644
--- a/sound/pci/echoaudio/indigoio.c
+++ b/sound/pci/echoaudio/indigoio.c
@@ -59,6 +59,9 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/indigo_io_dsp.fw");
+
#define FW_361_LOADER 0
#define FW_INDIGO_IO_DSP 1
diff --git a/sound/pci/echoaudio/layla20.c b/sound/pci/echoaudio/layla20.c
index 6cede49..8f5483a 100644
--- a/sound/pci/echoaudio/layla20.c
+++ b/sound/pci/echoaudio/layla20.c
@@ -66,6 +66,9 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/layla20_dsp.fw");
+MODULE_FIRMWARE("ea/layla20_asic.fw");
+
#define FW_LAYLA20_DSP 0
#define FW_LAYLA20_ASIC 1
diff --git a/sound/pci/echoaudio/layla24.c b/sound/pci/echoaudio/layla24.c
index 44f7354..0524667 100644
--- a/sound/pci/echoaudio/layla24.c
+++ b/sound/pci/echoaudio/layla24.c
@@ -68,6 +68,12 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/layla24_dsp.fw");
+MODULE_FIRMWARE("ea/layla24_1_asic.fw");
+MODULE_FIRMWARE("ea/layla24_2A_asic.fw");
+MODULE_FIRMWARE("ea/layla24_2S_asic.fw");
+
#define FW_361_LOADER 0
#define FW_LAYLA24_DSP 1
#define FW_LAYLA24_1_ASIC 2
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
index dc172d0..893c7c2 100644
--- a/sound/pci/echoaudio/mia.c
+++ b/sound/pci/echoaudio/mia.c
@@ -66,6 +66,9 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/mia_dsp.fw");
+
#define FW_361_LOADER 0
#define FW_MIA_DSP 1
diff --git a/sound/pci/echoaudio/mona.c b/sound/pci/echoaudio/mona.c
index c856ed5..3a5d5b0 100644
--- a/sound/pci/echoaudio/mona.c
+++ b/sound/pci/echoaudio/mona.c
@@ -64,6 +64,15 @@
#include <asm/atomic.h>
#include "echoaudio.h"
+MODULE_FIRMWARE("ea/loader_dsp.fw");
+MODULE_FIRMWARE("ea/mona_301_dsp.fw");
+MODULE_FIRMWARE("ea/mona_361_dsp.fw");
+MODULE_FIRMWARE("ea/mona_301_1_asic_48.fw");
+MODULE_FIRMWARE("ea/mona_301_1_asic_96.fw");
+MODULE_FIRMWARE("ea/mona_361_1_asic_48.fw");
+MODULE_FIRMWARE("ea/mona_361_1_asic_96.fw");
+MODULE_FIRMWARE("ea/mona_2_asic.fw");
+
#define FW_361_LOADER 0
#define FW_MONA_301_DSP 1
#define FW_MONA_361_DSP 2
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 80aa585..dbc805c 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -49,6 +49,13 @@
#include "p17v.h"
+#define HANA_FILENAME "emu/hana.fw"
+#define DOCK_FILENAME "emu/audio_dock.fw"
+
+MODULE_FIRMWARE(HANA_FILENAME);
+MODULE_FIRMWARE(DOCK_FILENAME);
+
+
/*************************************************************************
* EMU10K1 init / done
*************************************************************************/
@@ -693,8 +700,6 @@
int tmp,tmp2;
int reg;
int err;
- const char *hana_filename = "emu/hana.fw";
- const char *dock_filename = "emu/audio_dock.fw";
snd_printk(KERN_INFO "emu1010: Special config.\n");
/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
@@ -735,8 +740,8 @@
return -ENODEV;
}
snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
- if ((err = snd_emu1010_load_firmware(emu, hana_filename)) != 0) {
- snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", hana_filename);
+ if ((err = snd_emu1010_load_firmware(emu, HANA_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file %s failed\n", HANA_FILENAME);
return err;
}
@@ -938,7 +943,7 @@
/* Return to Audio Dock programming mode */
snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
- if ((err = snd_emu1010_load_firmware(emu, dock_filename)) != 0) {
+ if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
return err;
}
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 );
@@ -1216,6 +1221,15 @@
.spi_dac = 1,
.i2c_adc = 1,
.spk71 = 1} ,
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102,
+ .driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]",
+ .id = "EMU1010",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .ca_cardbus_chip = 1,
+ .spi_dac = 1,
+ .i2c_adc = 1,
+ .spk71 = 1} ,
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "Audigy 2 Value [Unknown]",
.id = "Audigy2",
diff --git a/sound/pci/emu10k1/p16v.c b/sound/pci/emu10k1/p16v.c
index 465f8d5..7ee19c6 100644
--- a/sound/pci/emu10k1/p16v.c
+++ b/sound/pci/emu10k1/p16v.c
@@ -433,7 +433,6 @@
struct snd_emu10k1_pcm *epcm;
int channel;
int result = 0;
- struct list_head *pos;
struct snd_pcm_substream *s;
u32 basic = 0;
u32 inte = 0;
@@ -448,8 +447,7 @@
running = 0;
break;
}
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
runtime = s->runtime;
epcm = runtime->private_data;
channel = substream->pcm->device-emu->p16v_device_offset;
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 425b167..6a0ddcf 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -798,10 +798,8 @@
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
{
unsigned int what = 0;
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == ensoniq->playback1_substream) {
what |= ES_P1_PAUSE;
snd_pcm_trigger_done(s, substream);
@@ -824,10 +822,8 @@
case SNDRV_PCM_TRIGGER_STOP:
{
unsigned int what = 0;
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == ensoniq->playback1_substream) {
what |= ES_DAC1_EN;
snd_pcm_trigger_done(s, substream);
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index dc84c18..2faf009 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -1554,10 +1554,7 @@
runtime->hw = snd_es1968_playback;
runtime->hw.buffer_bytes_max = runtime->hw.period_bytes_max =
calc_available_memory_size(chip);
-#if 0
- snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
- 1024);
-#endif
+
spin_lock_irq(&chip->substream_lock);
list_add(&es->list, &chip->substream_list);
spin_unlock_irq(&chip->substream_lock);
@@ -1613,10 +1610,8 @@
runtime->hw = snd_es1968_capture;
runtime->hw.buffer_bytes_max = runtime->hw.period_bytes_max =
calc_available_memory_size(chip) - 1024; /* keep MIXBUF size */
-#if 0
- snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
- 1024);
-#endif
+ snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES);
+
spin_lock_irq(&chip->substream_lock);
list_add(&es->list, &chip->substream_list);
spin_unlock_irq(&chip->substream_lock);
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 60d7b05..b2484bb 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -1,5 +1,8 @@
snd-hda-intel-objs := hda_intel.o
-snd-hda-codec-objs := hda_codec.o \
+# since snd-hda-intel is the only driver using hda-codec,
+# merge it into a single module although it was originally
+# designed to be individual modules
+snd-hda-intel-objs += hda_codec.o \
hda_generic.o \
patch_realtek.o \
patch_cmedia.o \
@@ -10,7 +13,7 @@
patch_conexant.o \
patch_via.o
ifdef CONFIG_PROC_FS
-snd-hda-codec-objs += hda_proc.o
+snd-hda-intel-objs += hda_proc.o
endif
-obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-intel.o snd-hda-codec.o
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-intel.o
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 8f34fb4..14649d5 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -24,7 +24,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
-#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include "hda_codec.h"
@@ -34,11 +33,6 @@
#include "hda_local.h"
-MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
-MODULE_DESCRIPTION("Universal interface for High Definition Audio Codec");
-MODULE_LICENSE("GPL");
-
-
/*
* vendor / preset table
*/
@@ -77,12 +71,13 @@
*
* Returns the obtained response value, or -1 for an error.
*/
-unsigned int snd_hda_codec_read(struct hda_codec *codec, hda_nid_t nid, int direct,
+unsigned int snd_hda_codec_read(struct hda_codec *codec, hda_nid_t nid,
+ int direct,
unsigned int verb, unsigned int parm)
{
unsigned int res;
mutex_lock(&codec->bus->cmd_mutex);
- if (! codec->bus->ops.command(codec, nid, direct, verb, parm))
+ if (!codec->bus->ops.command(codec, nid, direct, verb, parm))
res = codec->bus->ops.get_response(codec);
else
res = (unsigned int)-1;
@@ -90,8 +85,6 @@
return res;
}
-EXPORT_SYMBOL(snd_hda_codec_read);
-
/**
* snd_hda_codec_write - send a single command without waiting for response
* @codec: the HDA codec
@@ -114,8 +107,6 @@
return err;
}
-EXPORT_SYMBOL(snd_hda_codec_write);
-
/**
* snd_hda_sequence_write - sequence writes
* @codec: the HDA codec
@@ -130,8 +121,6 @@
snd_hda_codec_write(codec, seq->nid, 0, seq->verb, seq->param);
}
-EXPORT_SYMBOL(snd_hda_sequence_write);
-
/**
* snd_hda_get_sub_nodes - get the range of sub nodes
* @codec: the HDA codec
@@ -141,7 +130,8 @@
* Parse the NID and store the start NID of its sub-nodes.
* Returns the number of sub-nodes.
*/
-int snd_hda_get_sub_nodes(struct hda_codec *codec, hda_nid_t nid, hda_nid_t *start_id)
+int snd_hda_get_sub_nodes(struct hda_codec *codec, hda_nid_t nid,
+ hda_nid_t *start_id)
{
unsigned int parm;
@@ -150,8 +140,6 @@
return (int)(parm & 0x7fff);
}
-EXPORT_SYMBOL(snd_hda_get_sub_nodes);
-
/**
* snd_hda_get_connections - get connection list
* @codec: the HDA codec
@@ -187,12 +175,13 @@
conn_len = parm & AC_CLIST_LENGTH;
mask = (1 << (shift-1)) - 1;
- if (! conn_len)
+ if (!conn_len)
return 0; /* no connection */
if (conn_len == 1) {
/* single connection */
- parm = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_LIST, 0);
+ parm = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONNECT_LIST, 0);
conn_list[0] = parm & mask;
return 1;
}
@@ -207,18 +196,21 @@
if (i % num_elems == 0)
parm = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_LIST, i);
- range_val = !! (parm & (1 << (shift-1))); /* ranges */
+ range_val = !!(parm & (1 << (shift-1))); /* ranges */
val = parm & mask;
parm >>= shift;
if (range_val) {
/* ranges between the previous and this one */
- if (! prev_nid || prev_nid >= val) {
- snd_printk(KERN_WARNING "hda_codec: invalid dep_range_val %x:%x\n", prev_nid, val);
+ if (!prev_nid || prev_nid >= val) {
+ snd_printk(KERN_WARNING "hda_codec: "
+ "invalid dep_range_val %x:%x\n",
+ prev_nid, val);
continue;
}
for (n = prev_nid + 1; n <= val; n++) {
if (conns >= max_conns) {
- snd_printk(KERN_ERR "Too many connections\n");
+ snd_printk(KERN_ERR
+ "Too many connections\n");
return -EINVAL;
}
conn_list[conns++] = n;
@@ -253,7 +245,8 @@
struct hda_bus_unsolicited *unsol;
unsigned int wp;
- if ((unsol = bus->unsol) == NULL)
+ unsol = bus->unsol;
+ if (!unsol)
return 0;
wp = (unsol->wp + 1) % HDA_UNSOL_QUEUE_SIZE;
@@ -268,8 +261,6 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_queue_unsol_event);
-
/*
* process queueud unsolicited events
*/
@@ -287,7 +278,7 @@
rp <<= 1;
res = unsol->queue[rp];
caddr = unsol->queue[rp + 1];
- if (! (caddr & (1 << 4))) /* no unsolicited event? */
+ if (!(caddr & (1 << 4))) /* no unsolicited event? */
continue;
codec = bus->caddr_tbl[caddr & 0x0f];
if (codec && codec->patch_ops.unsol_event)
@@ -298,7 +289,7 @@
/*
* initialize unsolicited queue
*/
-static int init_unsol_queue(struct hda_bus *bus)
+static int __devinit init_unsol_queue(struct hda_bus *bus)
{
struct hda_bus_unsolicited *unsol;
@@ -306,8 +297,9 @@
return 0;
unsol = kzalloc(sizeof(*unsol), GFP_KERNEL);
- if (! unsol) {
- snd_printk(KERN_ERR "hda_codec: can't allocate unsolicited queue\n");
+ if (!unsol) {
+ snd_printk(KERN_ERR "hda_codec: "
+ "can't allocate unsolicited queue\n");
return -ENOMEM;
}
INIT_WORK(&unsol->work, process_unsol_events);
@@ -323,16 +315,15 @@
static int snd_hda_bus_free(struct hda_bus *bus)
{
- struct list_head *p, *n;
+ struct hda_codec *codec, *n;
- if (! bus)
+ if (!bus)
return 0;
if (bus->unsol) {
flush_scheduled_work();
kfree(bus->unsol);
}
- list_for_each_safe(p, n, &bus->codec_list) {
- struct hda_codec *codec = list_entry(p, struct hda_codec, list);
+ list_for_each_entry_safe(codec, n, &bus->codec_list, list) {
snd_hda_codec_free(codec);
}
if (bus->ops.private_free)
@@ -355,8 +346,9 @@
*
* Returns 0 if successful, or a negative error code.
*/
-int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp,
- struct hda_bus **busp)
+int __devinit snd_hda_bus_new(struct snd_card *card,
+ const struct hda_bus_template *temp,
+ struct hda_bus **busp)
{
struct hda_bus *bus;
int err;
@@ -385,7 +377,8 @@
mutex_init(&bus->cmd_mutex);
INIT_LIST_HEAD(&bus->codec_list);
- if ((err = snd_device_new(card, SNDRV_DEV_BUS, bus, &dev_ops)) < 0) {
+ err = snd_device_new(card, SNDRV_DEV_BUS, bus, &dev_ops);
+ if (err < 0) {
snd_hda_bus_free(bus);
return err;
}
@@ -394,22 +387,24 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_bus_new);
-
/*
* find a matching codec preset
*/
-static const struct hda_codec_preset *find_codec_preset(struct hda_codec *codec)
+static const struct hda_codec_preset __devinit *
+find_codec_preset(struct hda_codec *codec)
{
const struct hda_codec_preset **tbl, *preset;
+ if (codec->bus->modelname && !strcmp(codec->bus->modelname, "generic"))
+ return NULL; /* use the generic parser */
+
for (tbl = hda_preset_tables; *tbl; tbl++) {
for (preset = *tbl; preset->id; preset++) {
u32 mask = preset->mask;
- if (! mask)
+ if (!mask)
mask = ~0;
if (preset->id == (codec->vendor_id & mask) &&
- (! preset->rev ||
+ (!preset->rev ||
preset->rev == codec->revision_id))
return preset;
}
@@ -434,27 +429,30 @@
break;
}
}
- if (! vendor) {
+ if (!vendor) {
sprintf(tmp, "Generic %04x", vendor_id);
vendor = tmp;
}
if (codec->preset && codec->preset->name)
snprintf(name, namelen, "%s %s", vendor, codec->preset->name);
else
- snprintf(name, namelen, "%s ID %x", vendor, codec->vendor_id & 0xffff);
+ snprintf(name, namelen, "%s ID %x", vendor,
+ codec->vendor_id & 0xffff);
}
/*
* look for an AFG and MFG nodes
*/
-static void setup_fg_nodes(struct hda_codec *codec)
+static void __devinit setup_fg_nodes(struct hda_codec *codec)
{
int i, total_nodes;
hda_nid_t nid;
total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
for (i = 0; i < total_nodes; i++, nid++) {
- switch((snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE) & 0xff)) {
+ unsigned int func;
+ func = snd_hda_param_read(codec, nid, AC_PAR_FUNCTION_TYPE);
+ switch (func & 0xff) {
case AC_GRP_AUDIO_FUNCTION:
codec->afg = nid;
break;
@@ -478,7 +476,7 @@
codec->num_nodes = snd_hda_get_sub_nodes(codec, fg_node,
&codec->start_nid);
codec->wcaps = kmalloc(codec->num_nodes * 4, GFP_KERNEL);
- if (! codec->wcaps)
+ if (!codec->wcaps)
return -ENOMEM;
nid = codec->start_nid;
for (i = 0; i < codec->num_nodes; i++, nid++)
@@ -493,7 +491,7 @@
*/
static void snd_hda_codec_free(struct hda_codec *codec)
{
- if (! codec)
+ if (!codec)
return;
list_del(&codec->list);
codec->bus->caddr_tbl[codec->addr] = NULL;
@@ -514,8 +512,8 @@
*
* Returns 0 if successful, or a negative error code.
*/
-int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- struct hda_codec **codecp)
+int __devinit snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
+ struct hda_codec **codecp)
{
struct hda_codec *codec;
char component[13];
@@ -525,7 +523,8 @@
snd_assert(codec_addr <= HDA_MAX_CODEC_ADDRESS, return -EINVAL);
if (bus->caddr_tbl[codec_addr]) {
- snd_printk(KERN_ERR "hda_codec: address 0x%x is already occupied\n", codec_addr);
+ snd_printk(KERN_ERR "hda_codec: "
+ "address 0x%x is already occupied\n", codec_addr);
return -EBUSY;
}
@@ -543,18 +542,21 @@
list_add_tail(&codec->list, &bus->codec_list);
bus->caddr_tbl[codec_addr] = codec;
- codec->vendor_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_VENDOR_ID);
+ codec->vendor_id = snd_hda_param_read(codec, AC_NODE_ROOT,
+ AC_PAR_VENDOR_ID);
if (codec->vendor_id == -1)
/* read again, hopefully the access method was corrected
* in the last read...
*/
codec->vendor_id = snd_hda_param_read(codec, AC_NODE_ROOT,
AC_PAR_VENDOR_ID);
- codec->subsystem_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_SUBSYSTEM_ID);
- codec->revision_id = snd_hda_param_read(codec, AC_NODE_ROOT, AC_PAR_REV_ID);
+ codec->subsystem_id = snd_hda_param_read(codec, AC_NODE_ROOT,
+ AC_PAR_SUBSYSTEM_ID);
+ codec->revision_id = snd_hda_param_read(codec, AC_NODE_ROOT,
+ AC_PAR_REV_ID);
setup_fg_nodes(codec);
- if (! codec->afg && ! codec->mfg) {
+ if (!codec->afg && !codec->mfg) {
snd_printdd("hda_codec: no AFG or MFG node found\n");
snd_hda_codec_free(codec);
return -ENODEV;
@@ -566,15 +568,16 @@
return -ENOMEM;
}
- if (! codec->subsystem_id) {
+ if (!codec->subsystem_id) {
hda_nid_t nid = codec->afg ? codec->afg : codec->mfg;
- codec->subsystem_id = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_SUBSYSTEM_ID,
- 0);
+ codec->subsystem_id =
+ snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_SUBSYSTEM_ID, 0);
}
codec->preset = find_codec_preset(codec);
- if (! *bus->card->mixername)
+ /* audio codec should override the mixer name */
+ if (codec->afg || !*bus->card->mixername)
snd_hda_get_codec_name(codec, bus->card->mixername,
sizeof(bus->card->mixername));
@@ -600,8 +603,6 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_codec_new);
-
/**
* snd_hda_codec_setup_stream - set up the codec for streaming
* @codec: the CODEC to set up
@@ -610,13 +611,15 @@
* @channel_id: channel id to pass, zero based.
* @format: stream format.
*/
-void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid, u32 stream_tag,
+void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid,
+ u32 stream_tag,
int channel_id, int format)
{
- if (! nid)
+ if (!nid)
return;
- snd_printdd("hda_codec_setup_stream: NID=0x%x, stream=0x%x, channel=%d, format=0x%x\n",
+ snd_printdd("hda_codec_setup_stream: "
+ "NID=0x%x, stream=0x%x, channel=%d, format=0x%x\n",
nid, stream_tag, channel_id, format);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CHANNEL_STREAMID,
(stream_tag << 4) | channel_id);
@@ -624,8 +627,6 @@
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, format);
}
-EXPORT_SYMBOL(snd_hda_codec_setup_stream);
-
/*
* amp access functions
*/
@@ -636,7 +637,7 @@
#define INFO_AMP_VOL(ch) (1 << (1 + (ch)))
/* initialize the hash table */
-static void init_amp_hash(struct hda_codec *codec)
+static void __devinit init_amp_hash(struct hda_codec *codec)
{
memset(codec->amp_hash, 0xff, sizeof(codec->amp_hash));
codec->num_amp_entries = 0;
@@ -662,15 +663,18 @@
if (codec->num_amp_entries >= codec->amp_info_size) {
/* reallocate the array */
int new_size = codec->amp_info_size + 64;
- struct hda_amp_info *new_info = kcalloc(new_size, sizeof(struct hda_amp_info),
- GFP_KERNEL);
- if (! new_info) {
- snd_printk(KERN_ERR "hda_codec: can't malloc amp_info\n");
+ struct hda_amp_info *new_info;
+ new_info = kcalloc(new_size, sizeof(struct hda_amp_info),
+ GFP_KERNEL);
+ if (!new_info) {
+ snd_printk(KERN_ERR "hda_codec: "
+ "can't malloc amp_info\n");
return NULL;
}
if (codec->amp_info) {
memcpy(new_info, codec->amp_info,
- codec->amp_info_size * sizeof(struct hda_amp_info));
+ codec->amp_info_size *
+ sizeof(struct hda_amp_info));
kfree(codec->amp_info);
}
codec->amp_info_size = new_size;
@@ -691,15 +695,18 @@
*/
static u32 query_amp_caps(struct hda_codec *codec, hda_nid_t nid, int direction)
{
- struct hda_amp_info *info = get_alloc_amp_hash(codec, HDA_HASH_KEY(nid, direction, 0));
+ struct hda_amp_info *info;
- if (! info)
+ info = get_alloc_amp_hash(codec, HDA_HASH_KEY(nid, direction, 0));
+ if (!info)
return 0;
- if (! (info->status & INFO_AMP_CAPS)) {
- if (! (get_wcaps(codec, nid) & AC_WCAP_AMP_OVRD))
+ if (!(info->status & INFO_AMP_CAPS)) {
+ if (!(get_wcaps(codec, nid) & AC_WCAP_AMP_OVRD))
nid = codec->afg;
- info->amp_caps = snd_hda_param_read(codec, nid, direction == HDA_OUTPUT ?
- AC_PAR_AMP_OUT_CAP : AC_PAR_AMP_IN_CAP);
+ info->amp_caps = snd_hda_param_read(codec, nid,
+ direction == HDA_OUTPUT ?
+ AC_PAR_AMP_OUT_CAP :
+ AC_PAR_AMP_IN_CAP);
info->status |= INFO_AMP_CAPS;
}
return info->amp_caps;
@@ -709,8 +716,9 @@
* read the current volume to info
* if the cache exists, read the cache value.
*/
-static unsigned int get_vol_mute(struct hda_codec *codec, struct hda_amp_info *info,
- hda_nid_t nid, int ch, int direction, int index)
+static unsigned int get_vol_mute(struct hda_codec *codec,
+ struct hda_amp_info *info, hda_nid_t nid,
+ int ch, int direction, int index)
{
u32 val, parm;
@@ -720,7 +728,8 @@
parm = ch ? AC_AMP_GET_RIGHT : AC_AMP_GET_LEFT;
parm |= direction == HDA_OUTPUT ? AC_AMP_GET_OUTPUT : AC_AMP_GET_INPUT;
parm |= index;
- val = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_AMP_GAIN_MUTE, parm);
+ val = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_AMP_GAIN_MUTE, parm);
info->vol[ch] = val & 0xff;
info->status |= INFO_AMP_VOL(ch);
return info->vol[ch];
@@ -730,7 +739,8 @@
* write the current volume in info to the h/w and update the cache
*/
static void put_vol_mute(struct hda_codec *codec, struct hda_amp_info *info,
- hda_nid_t nid, int ch, int direction, int index, int val)
+ hda_nid_t nid, int ch, int direction, int index,
+ int val)
{
u32 parm;
@@ -748,8 +758,9 @@
int snd_hda_codec_amp_read(struct hda_codec *codec, hda_nid_t nid, int ch,
int direction, int index)
{
- struct hda_amp_info *info = get_alloc_amp_hash(codec, HDA_HASH_KEY(nid, direction, index));
- if (! info)
+ struct hda_amp_info *info;
+ info = get_alloc_amp_hash(codec, HDA_HASH_KEY(nid, direction, index));
+ if (!info)
return 0;
return get_vol_mute(codec, info, nid, ch, direction, index);
}
@@ -760,13 +771,14 @@
int snd_hda_codec_amp_update(struct hda_codec *codec, hda_nid_t nid, int ch,
int direction, int idx, int mask, int val)
{
- struct hda_amp_info *info = get_alloc_amp_hash(codec, HDA_HASH_KEY(nid, direction, idx));
+ struct hda_amp_info *info;
- if (! info)
+ info = get_alloc_amp_hash(codec, HDA_HASH_KEY(nid, direction, idx));
+ if (!info)
return 0;
val &= mask;
val |= get_vol_mute(codec, info, nid, ch, direction, idx) & ~mask;
- if (info->vol[ch] == val && ! codec->in_resume)
+ if (info->vol[ch] == val && !codec->in_resume)
return 0;
put_vol_mute(codec, info, nid, ch, direction, idx, val);
return 1;
@@ -783,7 +795,8 @@
#define get_amp_index(kc) (((kc)->private_value >> 19) & 0xf)
/* volume */
-int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
u16 nid = get_amp_nid(kcontrol);
@@ -792,9 +805,11 @@
u32 caps;
caps = query_amp_caps(codec, nid, dir);
- caps = (caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT; /* num steps */
- if (! caps) {
- printk(KERN_WARNING "hda_codec: num_steps = 0 for NID=0x%x\n", nid);
+ /* num steps */
+ caps = (caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT;
+ if (!caps) {
+ printk(KERN_WARNING "hda_codec: "
+ "num_steps = 0 for NID=0x%x\n", nid);
return -EINVAL;
}
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
@@ -804,7 +819,8 @@
return 0;
}
-int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = get_amp_nid(kcontrol);
@@ -820,7 +836,8 @@
return 0;
}
-int snd_hda_mixer_amp_volume_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+int snd_hda_mixer_amp_volume_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = get_amp_nid(kcontrol);
@@ -852,7 +869,8 @@
if (size < 4 * sizeof(unsigned int))
return -ENOMEM;
caps = query_amp_caps(codec, nid, dir);
- val2 = (((caps & AC_AMPCAP_STEP_SIZE) >> AC_AMPCAP_STEP_SIZE_SHIFT) + 1) * 25;
+ val2 = (caps & AC_AMPCAP_STEP_SIZE) >> AC_AMPCAP_STEP_SIZE_SHIFT;
+ val2 = (val2 + 1) * 25;
val1 = -((caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT);
val1 = ((int)val1) * ((int)val2);
if (put_user(SNDRV_CTL_TLVT_DB_SCALE, _tlv))
@@ -867,7 +885,8 @@
}
/* switch */
-int snd_hda_mixer_amp_switch_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+int snd_hda_mixer_amp_switch_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
int chs = get_amp_channels(kcontrol);
@@ -878,7 +897,8 @@
return 0;
}
-int snd_hda_mixer_amp_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+int snd_hda_mixer_amp_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = get_amp_nid(kcontrol);
@@ -888,13 +908,16 @@
long *valp = ucontrol->value.integer.value;
if (chs & 1)
- *valp++ = (snd_hda_codec_amp_read(codec, nid, 0, dir, idx) & 0x80) ? 0 : 1;
+ *valp++ = (snd_hda_codec_amp_read(codec, nid, 0, dir, idx) &
+ 0x80) ? 0 : 1;
if (chs & 2)
- *valp = (snd_hda_codec_amp_read(codec, nid, 1, dir, idx) & 0x80) ? 0 : 1;
+ *valp = (snd_hda_codec_amp_read(codec, nid, 1, dir, idx) &
+ 0x80) ? 0 : 1;
return 0;
}
-int snd_hda_mixer_amp_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+int snd_hda_mixer_amp_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = get_amp_nid(kcontrol);
@@ -925,7 +948,8 @@
#define AMP_VAL_IDX_SHIFT 19
#define AMP_VAL_IDX_MASK (0x0f<<19)
-int snd_hda_mixer_bind_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+int snd_hda_mixer_bind_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned long pval;
@@ -940,7 +964,8 @@
return err;
}
-int snd_hda_mixer_bind_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+int snd_hda_mixer_bind_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned long pval;
@@ -950,7 +975,8 @@
pval = kcontrol->private_value;
indices = (pval & AMP_VAL_IDX_MASK) >> AMP_VAL_IDX_SHIFT;
for (i = 0; i < indices; i++) {
- kcontrol->private_value = (pval & ~AMP_VAL_IDX_MASK) | (i << AMP_VAL_IDX_SHIFT);
+ kcontrol->private_value = (pval & ~AMP_VAL_IDX_MASK) |
+ (i << AMP_VAL_IDX_SHIFT);
err = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
if (err < 0)
break;
@@ -965,14 +991,16 @@
* SPDIF out controls
*/
-static int snd_hda_spdif_mask_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_hda_spdif_mask_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
-static int snd_hda_spdif_cmask_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_cmask_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.iec958.status[0] = IEC958_AES0_PROFESSIONAL |
IEC958_AES0_NONAUDIO |
@@ -983,7 +1011,8 @@
return 0;
}
-static int snd_hda_spdif_pmask_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_pmask_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.iec958.status[0] = IEC958_AES0_PROFESSIONAL |
IEC958_AES0_NONAUDIO |
@@ -991,7 +1020,8 @@
return 0;
}
-static int snd_hda_spdif_default_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_default_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -1011,19 +1041,21 @@
unsigned short val = 0;
if (sbits & IEC958_AES0_PROFESSIONAL)
- val |= 1 << 6;
+ val |= AC_DIG1_PROFESSIONAL;
if (sbits & IEC958_AES0_NONAUDIO)
- val |= 1 << 5;
+ val |= AC_DIG1_NONAUDIO;
if (sbits & IEC958_AES0_PROFESSIONAL) {
- if ((sbits & IEC958_AES0_PRO_EMPHASIS) == IEC958_AES0_PRO_EMPHASIS_5015)
- val |= 1 << 3;
+ if ((sbits & IEC958_AES0_PRO_EMPHASIS) ==
+ IEC958_AES0_PRO_EMPHASIS_5015)
+ val |= AC_DIG1_EMPHASIS;
} else {
- if ((sbits & IEC958_AES0_CON_EMPHASIS) == IEC958_AES0_CON_EMPHASIS_5015)
- val |= 1 << 3;
- if (! (sbits & IEC958_AES0_CON_NOT_COPYRIGHT))
- val |= 1 << 4;
+ if ((sbits & IEC958_AES0_CON_EMPHASIS) ==
+ IEC958_AES0_CON_EMPHASIS_5015)
+ val |= AC_DIG1_EMPHASIS;
+ if (!(sbits & IEC958_AES0_CON_NOT_COPYRIGHT))
+ val |= AC_DIG1_COPYRIGHT;
if (sbits & (IEC958_AES1_CON_ORIGINAL << 8))
- val |= 1 << 7;
+ val |= AC_DIG1_LEVEL;
val |= sbits & (IEC958_AES1_CON_CATEGORY << 8);
}
return val;
@@ -1035,26 +1067,27 @@
{
unsigned int sbits = 0;
- if (val & (1 << 5))
+ if (val & AC_DIG1_NONAUDIO)
sbits |= IEC958_AES0_NONAUDIO;
- if (val & (1 << 6))
+ if (val & AC_DIG1_PROFESSIONAL)
sbits |= IEC958_AES0_PROFESSIONAL;
if (sbits & IEC958_AES0_PROFESSIONAL) {
- if (sbits & (1 << 3))
+ if (sbits & AC_DIG1_EMPHASIS)
sbits |= IEC958_AES0_PRO_EMPHASIS_5015;
} else {
- if (val & (1 << 3))
+ if (val & AC_DIG1_EMPHASIS)
sbits |= IEC958_AES0_CON_EMPHASIS_5015;
- if (! (val & (1 << 4)))
+ if (!(val & AC_DIG1_COPYRIGHT))
sbits |= IEC958_AES0_CON_NOT_COPYRIGHT;
- if (val & (1 << 7))
+ if (val & AC_DIG1_LEVEL)
sbits |= (IEC958_AES1_CON_ORIGINAL << 8);
sbits |= val & (0x7f << 8);
}
return sbits;
}
-static int snd_hda_spdif_default_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_default_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value;
@@ -1072,15 +1105,18 @@
codec->spdif_ctls = val;
if (change || codec->in_resume) {
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, val & 0xff);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_2, val >> 8);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ val & 0xff);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_2,
+ val >> 8);
}
mutex_unlock(&codec->spdif_mutex);
return change;
}
-static int snd_hda_spdif_out_switch_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_hda_spdif_out_switch_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;
@@ -1089,15 +1125,17 @@
return 0;
}
-static int snd_hda_spdif_out_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_out_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- ucontrol->value.integer.value[0] = codec->spdif_ctls & 1;
+ ucontrol->value.integer.value[0] = codec->spdif_ctls & AC_DIG1_ENABLE;
return 0;
}
-static int snd_hda_spdif_out_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_out_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value;
@@ -1105,16 +1143,21 @@
int change;
mutex_lock(&codec->spdif_mutex);
- val = codec->spdif_ctls & ~1;
+ val = codec->spdif_ctls & ~AC_DIG1_ENABLE;
if (ucontrol->value.integer.value[0])
- val |= 1;
+ val |= AC_DIG1_ENABLE;
change = codec->spdif_ctls != val;
if (change || codec->in_resume) {
codec->spdif_ctls = val;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, val & 0xff);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT |
- AC_AMP_SET_OUTPUT | ((val & 1) ? 0 : 0x80));
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ val & 0xff);
+ /* unmute amp switch (if any) */
+ if ((get_wcaps(codec, nid) & AC_WCAP_OUT_AMP) &&
+ (val & AC_DIG1_ENABLE))
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AC_AMP_SET_RIGHT | AC_AMP_SET_LEFT |
+ AC_AMP_SET_OUTPUT);
}
mutex_unlock(&codec->spdif_mutex);
return change;
@@ -1162,7 +1205,8 @@
*
* Returns 0 if successful, or a negative error code.
*/
-int snd_hda_create_spdif_out_ctls(struct hda_codec *codec, hda_nid_t nid)
+int __devinit snd_hda_create_spdif_out_ctls(struct hda_codec *codec,
+ hda_nid_t nid)
{
int err;
struct snd_kcontrol *kctl;
@@ -1171,10 +1215,12 @@
for (dig_mix = dig_mixes; dig_mix->name; dig_mix++) {
kctl = snd_ctl_new1(dig_mix, codec);
kctl->private_value = nid;
- if ((err = snd_ctl_add(codec->bus->card, kctl)) < 0)
+ err = snd_ctl_add(codec->bus->card, kctl);
+ if (err < 0)
return err;
}
- codec->spdif_ctls = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_DIGI_CONVERT, 0);
+ codec->spdif_ctls =
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_DIGI_CONVERT, 0);
codec->spdif_status = convert_to_spdif_status(codec->spdif_ctls);
return 0;
}
@@ -1185,7 +1231,8 @@
#define snd_hda_spdif_in_switch_info snd_hda_spdif_out_switch_info
-static int snd_hda_spdif_in_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_in_switch_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -1193,7 +1240,8 @@
return 0;
}
-static int snd_hda_spdif_in_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_in_switch_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value;
@@ -1204,13 +1252,15 @@
change = codec->spdif_in_enable != val;
if (change || codec->in_resume) {
codec->spdif_in_enable = val;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, val);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ val);
}
mutex_unlock(&codec->spdif_mutex);
return change;
}
-static int snd_hda_spdif_in_status_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_hda_spdif_in_status_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value;
@@ -1254,7 +1304,8 @@
*
* Returns 0 if successful, or a negative error code.
*/
-int snd_hda_create_spdif_in_ctls(struct hda_codec *codec, hda_nid_t nid)
+int __devinit snd_hda_create_spdif_in_ctls(struct hda_codec *codec,
+ hda_nid_t nid)
{
int err;
struct snd_kcontrol *kctl;
@@ -1263,10 +1314,13 @@
for (dig_mix = dig_in_ctls; dig_mix->name; dig_mix++) {
kctl = snd_ctl_new1(dig_mix, codec);
kctl->private_value = nid;
- if ((err = snd_ctl_add(codec->bus->card, kctl)) < 0)
+ err = snd_ctl_add(codec->bus->card, kctl);
+ if (err < 0)
return err;
}
- codec->spdif_in_enable = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_DIGI_CONVERT, 0) & 1;
+ codec->spdif_in_enable =
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_DIGI_CONVERT, 0) &
+ AC_DIG1_ENABLE;
return 0;
}
@@ -1304,15 +1358,14 @@
*
* Returns 0 if successful, otherwise a negative error code.
*/
-int snd_hda_build_controls(struct hda_bus *bus)
+int __devinit snd_hda_build_controls(struct hda_bus *bus)
{
- struct list_head *p;
+ struct hda_codec *codec;
/* build controls */
- list_for_each(p, &bus->codec_list) {
- struct hda_codec *codec = list_entry(p, struct hda_codec, list);
+ list_for_each_entry(codec, &bus->codec_list, list) {
int err;
- if (! codec->patch_ops.build_controls)
+ if (!codec->patch_ops.build_controls)
continue;
err = codec->patch_ops.build_controls(codec);
if (err < 0)
@@ -1320,13 +1373,12 @@
}
/* initialize */
- list_for_each(p, &bus->codec_list) {
- struct hda_codec *codec = list_entry(p, struct hda_codec, list);
+ list_for_each_entry(codec, &bus->codec_list, list) {
int err;
hda_set_power_state(codec,
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D0);
- if (! codec->patch_ops.init)
+ if (!codec->patch_ops.init)
continue;
err = codec->patch_ops.init(codec);
if (err < 0)
@@ -1335,8 +1387,6 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_build_controls);
-
/*
* stream formats
*/
@@ -1361,6 +1411,11 @@
{ 96000, SNDRV_PCM_RATE_96000, 0x0800 }, /* 2 x 48 */
{ 176400, SNDRV_PCM_RATE_176400, 0x5800 },/* 4 x 44 */
{ 192000, SNDRV_PCM_RATE_192000, 0x1800 }, /* 4 x 48 */
+#define AC_PAR_PCM_RATE_BITS 11
+ /* up to bits 10, 384kHZ isn't supported properly */
+
+ /* not autodetected value */
+ { 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */
{ 0 } /* terminator */
};
@@ -1389,7 +1444,7 @@
val = rate_bits[i].hda_fmt;
break;
}
- if (! rate_bits[i].hz) {
+ if (!rate_bits[i].hz) {
snd_printdd("invalid rate %d\n", rate);
return 0;
}
@@ -1414,15 +1469,14 @@
val |= 0x20;
break;
default:
- snd_printdd("invalid format width %d\n", snd_pcm_format_width(format));
+ snd_printdd("invalid format width %d\n",
+ snd_pcm_format_width(format));
return 0;
}
return val;
}
-EXPORT_SYMBOL(snd_hda_calc_stream_format);
-
/**
* snd_hda_query_supported_pcm - query the supported PCM rates and formats
* @codec: the HDA codec
@@ -1449,12 +1503,12 @@
if (val == -1)
return -EIO;
}
- if (! val)
+ if (!val)
val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
if (ratesp) {
u32 rates = 0;
- for (i = 0; rate_bits[i].hz; i++) {
+ for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++) {
if (val & (1 << i))
rates |= rate_bits[i].alsa_bits;
}
@@ -1470,8 +1524,9 @@
streams = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
if (streams == -1)
return -EIO;
- if (! streams) {
- streams = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
+ if (!streams) {
+ streams = snd_hda_param_read(codec, codec->afg,
+ AC_PAR_STREAM);
if (streams == -1)
return -EIO;
}
@@ -1495,7 +1550,8 @@
bps = 24;
else if (val & AC_SUPPCM_BITS_20)
bps = 20;
- } else if (val & (AC_SUPPCM_BITS_20|AC_SUPPCM_BITS_24|AC_SUPPCM_BITS_32)) {
+ } else if (val & (AC_SUPPCM_BITS_20|AC_SUPPCM_BITS_24|
+ AC_SUPPCM_BITS_32)) {
formats |= SNDRV_PCM_FMTBIT_S32_LE;
if (val & AC_SUPPCM_BITS_32)
bps = 32;
@@ -1505,10 +1561,12 @@
bps = 20;
}
}
- else if (streams == AC_SUPFMT_FLOAT32) { /* should be exclusive */
+ else if (streams == AC_SUPFMT_FLOAT32) {
+ /* should be exclusive */
formats |= SNDRV_PCM_FMTBIT_FLOAT_LE;
bps = 32;
- } else if (streams == AC_SUPFMT_AC3) { /* should be exclusive */
+ } else if (streams == AC_SUPFMT_AC3) {
+ /* should be exclusive */
/* temporary hack: we have still no proper support
* for the direct AC3 stream...
*/
@@ -1525,7 +1583,8 @@
}
/**
- * snd_hda_is_supported_format - check whether the given node supports the format val
+ * snd_hda_is_supported_format - check whether the given node supports
+ * the format val
*
* Returns 1 if supported, 0 if not.
*/
@@ -1541,50 +1600,50 @@
if (val == -1)
return 0;
}
- if (! val) {
+ if (!val) {
val = snd_hda_param_read(codec, codec->afg, AC_PAR_PCM);
if (val == -1)
return 0;
}
rate = format & 0xff00;
- for (i = 0; rate_bits[i].hz; i++)
+ for (i = 0; i < AC_PAR_PCM_RATE_BITS; i++)
if (rate_bits[i].hda_fmt == rate) {
if (val & (1 << i))
break;
return 0;
}
- if (! rate_bits[i].hz)
+ if (i >= AC_PAR_PCM_RATE_BITS)
return 0;
stream = snd_hda_param_read(codec, nid, AC_PAR_STREAM);
if (stream == -1)
return 0;
- if (! stream && nid != codec->afg)
+ if (!stream && nid != codec->afg)
stream = snd_hda_param_read(codec, codec->afg, AC_PAR_STREAM);
- if (! stream || stream == -1)
+ if (!stream || stream == -1)
return 0;
if (stream & AC_SUPFMT_PCM) {
switch (format & 0xf0) {
case 0x00:
- if (! (val & AC_SUPPCM_BITS_8))
+ if (!(val & AC_SUPPCM_BITS_8))
return 0;
break;
case 0x10:
- if (! (val & AC_SUPPCM_BITS_16))
+ if (!(val & AC_SUPPCM_BITS_16))
return 0;
break;
case 0x20:
- if (! (val & AC_SUPPCM_BITS_20))
+ if (!(val & AC_SUPPCM_BITS_20))
return 0;
break;
case 0x30:
- if (! (val & AC_SUPPCM_BITS_24))
+ if (!(val & AC_SUPPCM_BITS_24))
return 0;
break;
case 0x40:
- if (! (val & AC_SUPPCM_BITS_32))
+ if (!(val & AC_SUPPCM_BITS_32))
return 0;
break;
default:
@@ -1625,15 +1684,15 @@
return 0;
}
-static int set_pcm_default_values(struct hda_codec *codec, struct hda_pcm_stream *info)
+static int __devinit set_pcm_default_values(struct hda_codec *codec,
+ struct hda_pcm_stream *info)
{
- if (info->nid) {
- /* query support PCM information from the given NID */
- if (! info->rates || ! info->formats)
- snd_hda_query_supported_pcm(codec, info->nid,
- info->rates ? NULL : &info->rates,
- info->formats ? NULL : &info->formats,
- info->maxbps ? NULL : &info->maxbps);
+ /* query support PCM information from the given NID */
+ if (info->nid && (!info->rates || !info->formats)) {
+ snd_hda_query_supported_pcm(codec, info->nid,
+ info->rates ? NULL : &info->rates,
+ info->formats ? NULL : &info->formats,
+ info->maxbps ? NULL : &info->maxbps);
}
if (info->ops.open == NULL)
info->ops.open = hda_pcm_default_open_close;
@@ -1676,15 +1735,14 @@
*
* This function returns 0 if successfull, or a negative error code.
*/
-int snd_hda_build_pcms(struct hda_bus *bus)
+int __devinit snd_hda_build_pcms(struct hda_bus *bus)
{
- struct list_head *p;
+ struct hda_codec *codec;
- list_for_each(p, &bus->codec_list) {
- struct hda_codec *codec = list_entry(p, struct hda_codec, list);
+ list_for_each_entry(codec, &bus->codec_list, list) {
unsigned int pcm, s;
int err;
- if (! codec->patch_ops.build_pcms)
+ if (!codec->patch_ops.build_pcms)
continue;
err = codec->patch_ops.build_pcms(codec);
if (err < 0)
@@ -1693,7 +1751,7 @@
for (s = 0; s < 2; s++) {
struct hda_pcm_stream *info;
info = &codec->pcm_info[pcm].stream[s];
- if (! info->substreams)
+ if (!info->substreams)
continue;
err = set_pcm_default_values(codec, info);
if (err < 0)
@@ -1704,8 +1762,6 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_build_pcms);
-
/**
* snd_hda_check_board_config - compare the current codec with the config table
* @codec: the HDA codec
@@ -1719,9 +1775,9 @@
*
* If no entries are matching, the function returns a negative value.
*/
-int snd_hda_check_board_config(struct hda_codec *codec,
- int num_configs, const char **models,
- const struct snd_pci_quirk *tbl)
+int __devinit snd_hda_check_board_config(struct hda_codec *codec,
+ int num_configs, const char **models,
+ const struct snd_pci_quirk *tbl)
{
if (codec->bus->modelname && models) {
int i;
@@ -1771,24 +1827,26 @@
*
* Returns 0 if successful, or a negative error code.
*/
-int snd_hda_add_new_ctls(struct hda_codec *codec, struct snd_kcontrol_new *knew)
+int __devinit snd_hda_add_new_ctls(struct hda_codec *codec,
+ struct snd_kcontrol_new *knew)
{
int err;
for (; knew->name; knew++) {
struct snd_kcontrol *kctl;
kctl = snd_ctl_new1(knew, codec);
- if (! kctl)
+ if (!kctl)
return -ENOMEM;
err = snd_ctl_add(codec->bus->card, kctl);
if (err < 0) {
- if (! codec->addr)
+ if (!codec->addr)
return err;
kctl = snd_ctl_new1(knew, codec);
- if (! kctl)
+ if (!kctl)
return -ENOMEM;
kctl->id.device = codec->addr;
- if ((err = snd_ctl_add(codec->bus->card, kctl)) < 0)
+ err = snd_ctl_add(codec->bus->card, kctl);
+ if (err < 0)
return err;
}
}
@@ -1799,8 +1857,10 @@
/*
* Channel mode helper
*/
-int snd_hda_ch_mode_info(struct hda_codec *codec, struct snd_ctl_elem_info *uinfo,
- const struct hda_channel_mode *chmode, int num_chmodes)
+int snd_hda_ch_mode_info(struct hda_codec *codec,
+ struct snd_ctl_elem_info *uinfo,
+ const struct hda_channel_mode *chmode,
+ int num_chmodes)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
@@ -1812,8 +1872,10 @@
return 0;
}
-int snd_hda_ch_mode_get(struct hda_codec *codec, struct snd_ctl_elem_value *ucontrol,
- const struct hda_channel_mode *chmode, int num_chmodes,
+int snd_hda_ch_mode_get(struct hda_codec *codec,
+ struct snd_ctl_elem_value *ucontrol,
+ const struct hda_channel_mode *chmode,
+ int num_chmodes,
int max_channels)
{
int i;
@@ -1827,15 +1889,17 @@
return 0;
}
-int snd_hda_ch_mode_put(struct hda_codec *codec, struct snd_ctl_elem_value *ucontrol,
- const struct hda_channel_mode *chmode, int num_chmodes,
+int snd_hda_ch_mode_put(struct hda_codec *codec,
+ struct snd_ctl_elem_value *ucontrol,
+ const struct hda_channel_mode *chmode,
+ int num_chmodes,
int *max_channelsp)
{
unsigned int mode;
mode = ucontrol->value.enumerated.item[0];
snd_assert(mode < num_chmodes, return -EINVAL);
- if (*max_channelsp == chmode[mode].channels && ! codec->in_resume)
+ if (*max_channelsp == chmode[mode].channels && !codec->in_resume)
return 0;
/* change the current channel setting */
*max_channelsp = chmode[mode].channels;
@@ -1847,7 +1911,8 @@
/*
* input MUX helper
*/
-int snd_hda_input_mux_info(const struct hda_input_mux *imux, struct snd_ctl_elem_info *uinfo)
+int snd_hda_input_mux_info(const struct hda_input_mux *imux,
+ struct snd_ctl_elem_info *uinfo)
{
unsigned int index;
@@ -1861,8 +1926,10 @@
return 0;
}
-int snd_hda_input_mux_put(struct hda_codec *codec, const struct hda_input_mux *imux,
- struct snd_ctl_elem_value *ucontrol, hda_nid_t nid,
+int snd_hda_input_mux_put(struct hda_codec *codec,
+ const struct hda_input_mux *imux,
+ struct snd_ctl_elem_value *ucontrol,
+ hda_nid_t nid,
unsigned int *cur_val)
{
unsigned int idx;
@@ -1870,7 +1937,7 @@
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
- if (*cur_val == idx && ! codec->in_resume)
+ if (*cur_val == idx && !codec->in_resume)
return 0;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL,
imux->items[idx].index);
@@ -1883,25 +1950,53 @@
* Multi-channel / digital-out PCM helper functions
*/
+/* setup SPDIF output stream */
+static void setup_dig_out_stream(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int stream_tag, unsigned int format)
+{
+ /* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
+ if (codec->spdif_ctls & AC_DIG1_ENABLE)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+ snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
+ /* turn on again (if needed) */
+ if (codec->spdif_ctls & AC_DIG1_ENABLE)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ codec->spdif_ctls & 0xff);
+}
+
/*
* open the digital out in the exclusive mode
*/
-int snd_hda_multi_out_dig_open(struct hda_codec *codec, struct hda_multi_out *mout)
+int snd_hda_multi_out_dig_open(struct hda_codec *codec,
+ struct hda_multi_out *mout)
{
mutex_lock(&codec->spdif_mutex);
- if (mout->dig_out_used) {
- mutex_unlock(&codec->spdif_mutex);
- return -EBUSY; /* already being used */
- }
+ if (mout->dig_out_used == HDA_DIG_ANALOG_DUP)
+ /* already opened as analog dup; reset it once */
+ snd_hda_codec_setup_stream(codec, mout->dig_out_nid, 0, 0, 0);
mout->dig_out_used = HDA_DIG_EXCLUSIVE;
mutex_unlock(&codec->spdif_mutex);
return 0;
}
+int snd_hda_multi_out_dig_prepare(struct hda_codec *codec,
+ struct hda_multi_out *mout,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ mutex_lock(&codec->spdif_mutex);
+ setup_dig_out_stream(codec, mout->dig_out_nid, stream_tag, format);
+ mutex_unlock(&codec->spdif_mutex);
+ return 0;
+}
+
/*
* release the digital out
*/
-int snd_hda_multi_out_dig_close(struct hda_codec *codec, struct hda_multi_out *mout)
+int snd_hda_multi_out_dig_close(struct hda_codec *codec,
+ struct hda_multi_out *mout)
{
mutex_lock(&codec->spdif_mutex);
mout->dig_out_used = 0;
@@ -1912,7 +2007,8 @@
/*
* set up more restrictions for analog out
*/
-int snd_hda_multi_out_analog_open(struct hda_codec *codec, struct hda_multi_out *mout,
+int snd_hda_multi_out_analog_open(struct hda_codec *codec,
+ struct hda_multi_out *mout,
struct snd_pcm_substream *substream)
{
substream->runtime->hw.channels_max = mout->max_channels;
@@ -1924,7 +2020,8 @@
* set up the i/o for analog out
* when the digital out is available, copy the front out to digital out, too.
*/
-int snd_hda_multi_out_analog_prepare(struct hda_codec *codec, struct hda_multi_out *mout,
+int snd_hda_multi_out_analog_prepare(struct hda_codec *codec,
+ struct hda_multi_out *mout,
unsigned int stream_tag,
unsigned int format,
struct snd_pcm_substream *substream)
@@ -1936,24 +2033,27 @@
mutex_lock(&codec->spdif_mutex);
if (mout->dig_out_nid && mout->dig_out_used != HDA_DIG_EXCLUSIVE) {
if (chs == 2 &&
- snd_hda_is_supported_format(codec, mout->dig_out_nid, format) &&
- ! (codec->spdif_status & IEC958_AES0_NONAUDIO)) {
+ snd_hda_is_supported_format(codec, mout->dig_out_nid,
+ format) &&
+ !(codec->spdif_status & IEC958_AES0_NONAUDIO)) {
mout->dig_out_used = HDA_DIG_ANALOG_DUP;
- /* setup digital receiver */
- snd_hda_codec_setup_stream(codec, mout->dig_out_nid,
- stream_tag, 0, format);
+ setup_dig_out_stream(codec, mout->dig_out_nid,
+ stream_tag, format);
} else {
mout->dig_out_used = 0;
- snd_hda_codec_setup_stream(codec, mout->dig_out_nid, 0, 0, 0);
+ snd_hda_codec_setup_stream(codec, mout->dig_out_nid,
+ 0, 0, 0);
}
}
mutex_unlock(&codec->spdif_mutex);
/* front */
- snd_hda_codec_setup_stream(codec, nids[HDA_FRONT], stream_tag, 0, format);
+ snd_hda_codec_setup_stream(codec, nids[HDA_FRONT], stream_tag,
+ 0, format);
if (mout->hp_nid && mout->hp_nid != nids[HDA_FRONT])
/* headphone out will just decode front left/right (stereo) */
- snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag, 0, format);
+ snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag,
+ 0, format);
/* extra outputs copied from front */
for (i = 0; i < ARRAY_SIZE(mout->extra_out_nid); i++)
if (mout->extra_out_nid[i])
@@ -1964,11 +2064,11 @@
/* surrounds */
for (i = 1; i < mout->num_dacs; i++) {
if (chs >= (i + 1) * 2) /* independent out */
- snd_hda_codec_setup_stream(codec, nids[i], stream_tag, i * 2,
- format);
+ snd_hda_codec_setup_stream(codec, nids[i], stream_tag,
+ i * 2, format);
else /* copy front */
- snd_hda_codec_setup_stream(codec, nids[i], stream_tag, 0,
- format);
+ snd_hda_codec_setup_stream(codec, nids[i], stream_tag,
+ 0, format);
}
return 0;
}
@@ -1976,7 +2076,8 @@
/*
* clean up the setting for analog out
*/
-int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, struct hda_multi_out *mout)
+int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec,
+ struct hda_multi_out *mout)
{
hda_nid_t *nids = mout->dac_nids;
int i;
@@ -2003,7 +2104,7 @@
* Helper for automatic ping configuration
*/
-static int is_in_nid_list(hda_nid_t nid, hda_nid_t *list)
+static int __devinit is_in_nid_list(hda_nid_t nid, hda_nid_t *list)
{
for (; *list; list++)
if (*list == nid)
@@ -2011,6 +2112,32 @@
return 0;
}
+
+/*
+ * Sort an associated group of pins according to their sequence numbers.
+ */
+static void sort_pins_by_sequence(hda_nid_t * pins, short * sequences,
+ int num_pins)
+{
+ int i, j;
+ short seq;
+ hda_nid_t nid;
+
+ for (i = 0; i < num_pins; i++) {
+ for (j = i + 1; j < num_pins; j++) {
+ if (sequences[i] > sequences[j]) {
+ seq = sequences[i];
+ sequences[i] = sequences[j];
+ sequences[j] = seq;
+ nid = pins[i];
+ pins[i] = pins[j];
+ pins[j] = nid;
+ }
+ }
+ }
+}
+
+
/*
* Parse all pin widgets and store the useful pin nids to cfg
*
@@ -2028,22 +2155,27 @@
* The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
* respectively.
*/
-int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg,
- hda_nid_t *ignore_nids)
+int __devinit snd_hda_parse_pin_def_config(struct hda_codec *codec,
+ struct auto_pin_cfg *cfg,
+ hda_nid_t *ignore_nids)
{
hda_nid_t nid, nid_start;
- int i, j, nodes;
- short seq, assoc_line_out, sequences[ARRAY_SIZE(cfg->line_out_pins)];
+ int nodes;
+ short seq, assoc_line_out, assoc_speaker;
+ short sequences_line_out[ARRAY_SIZE(cfg->line_out_pins)];
+ short sequences_speaker[ARRAY_SIZE(cfg->speaker_pins)];
memset(cfg, 0, sizeof(*cfg));
- memset(sequences, 0, sizeof(sequences));
- assoc_line_out = 0;
+ memset(sequences_line_out, 0, sizeof(sequences_line_out));
+ memset(sequences_speaker, 0, sizeof(sequences_speaker));
+ assoc_line_out = assoc_speaker = 0;
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
for (nid = nid_start; nid < nodes + nid_start; nid++) {
unsigned int wid_caps = get_wcaps(codec, nid);
- unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ unsigned int wid_type =
+ (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
unsigned int def_conf;
short assoc, loc;
@@ -2054,7 +2186,8 @@
if (ignore_nids && is_in_nid_list(nid, ignore_nids))
continue;
- def_conf = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
continue;
loc = get_defcfg_location(def_conf);
@@ -2062,22 +2195,31 @@
case AC_JACK_LINE_OUT:
seq = get_defcfg_sequence(def_conf);
assoc = get_defcfg_association(def_conf);
- if (! assoc)
+ if (!assoc)
continue;
- if (! assoc_line_out)
+ if (!assoc_line_out)
assoc_line_out = assoc;
else if (assoc_line_out != assoc)
continue;
if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins))
continue;
cfg->line_out_pins[cfg->line_outs] = nid;
- sequences[cfg->line_outs] = seq;
+ sequences_line_out[cfg->line_outs] = seq;
cfg->line_outs++;
break;
case AC_JACK_SPEAKER:
+ seq = get_defcfg_sequence(def_conf);
+ assoc = get_defcfg_association(def_conf);
+ if (! assoc)
+ continue;
+ if (! assoc_speaker)
+ assoc_speaker = assoc;
+ else if (assoc_speaker != assoc)
+ continue;
if (cfg->speaker_outs >= ARRAY_SIZE(cfg->speaker_pins))
continue;
cfg->speaker_pins[cfg->speaker_outs] = nid;
+ sequences_speaker[cfg->speaker_outs] = seq;
cfg->speaker_outs++;
break;
case AC_JACK_HP_OUT:
@@ -2123,34 +2265,45 @@
}
/* sort by sequence */
- for (i = 0; i < cfg->line_outs; i++)
- for (j = i + 1; j < cfg->line_outs; j++)
- if (sequences[i] > sequences[j]) {
- seq = sequences[i];
- sequences[i] = sequences[j];
- sequences[j] = seq;
- nid = cfg->line_out_pins[i];
- cfg->line_out_pins[i] = cfg->line_out_pins[j];
- cfg->line_out_pins[j] = nid;
- }
+ sort_pins_by_sequence(cfg->line_out_pins, sequences_line_out,
+ cfg->line_outs);
+ sort_pins_by_sequence(cfg->speaker_pins, sequences_speaker,
+ cfg->speaker_outs);
+
+ /*
+ * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
+ * as a primary output
+ */
+ if (!cfg->line_outs) {
+ if (cfg->speaker_outs) {
+ cfg->line_outs = cfg->speaker_outs;
+ memcpy(cfg->line_out_pins, cfg->speaker_pins,
+ sizeof(cfg->speaker_pins));
+ cfg->speaker_outs = 0;
+ memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins));
+ cfg->line_out_type = AUTO_PIN_SPEAKER_OUT;
+ } else if (cfg->hp_outs) {
+ cfg->line_outs = cfg->hp_outs;
+ memcpy(cfg->line_out_pins, cfg->hp_pins,
+ sizeof(cfg->hp_pins));
+ cfg->hp_outs = 0;
+ memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
+ cfg->line_out_type = AUTO_PIN_HP_OUT;
+ }
+ }
/* Reorder the surround channels
* ALSA sequence is front/surr/clfe/side
* HDA sequence is:
* 4-ch: front/surr => OK as it is
* 6-ch: front/clfe/surr
- * 8-ch: front/clfe/side/surr
+ * 8-ch: front/clfe/rear/side|fc
*/
switch (cfg->line_outs) {
case 3:
- nid = cfg->line_out_pins[1];
- cfg->line_out_pins[1] = cfg->line_out_pins[2];
- cfg->line_out_pins[2] = nid;
- break;
case 4:
nid = cfg->line_out_pins[1];
- cfg->line_out_pins[1] = cfg->line_out_pins[3];
- cfg->line_out_pins[3] = cfg->line_out_pins[2];
+ cfg->line_out_pins[1] = cfg->line_out_pins[2];
cfg->line_out_pins[2] = nid;
break;
}
@@ -2179,26 +2332,6 @@
cfg->input_pins[AUTO_PIN_CD],
cfg->input_pins[AUTO_PIN_AUX]);
- /*
- * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
- * as a primary output
- */
- if (! cfg->line_outs) {
- if (cfg->speaker_outs) {
- cfg->line_outs = cfg->speaker_outs;
- memcpy(cfg->line_out_pins, cfg->speaker_pins,
- sizeof(cfg->speaker_pins));
- cfg->speaker_outs = 0;
- memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins));
- } else if (cfg->hp_outs) {
- cfg->line_outs = cfg->hp_outs;
- memcpy(cfg->line_out_pins, cfg->hp_pins,
- sizeof(cfg->hp_pins));
- cfg->hp_outs = 0;
- memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
- }
- }
-
return 0;
}
@@ -2222,11 +2355,10 @@
*/
int snd_hda_suspend(struct hda_bus *bus, pm_message_t state)
{
- struct list_head *p;
+ struct hda_codec *codec;
/* FIXME: should handle power widget capabilities */
- list_for_each(p, &bus->codec_list) {
- struct hda_codec *codec = list_entry(p, struct hda_codec, list);
+ list_for_each_entry(codec, &bus->codec_list, list) {
if (codec->patch_ops.suspend)
codec->patch_ops.suspend(codec, state);
hda_set_power_state(codec,
@@ -2236,8 +2368,6 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_suspend);
-
/**
* snd_hda_resume - resume the codecs
* @bus: the HDA bus
@@ -2247,10 +2377,9 @@
*/
int snd_hda_resume(struct hda_bus *bus)
{
- struct list_head *p;
+ struct hda_codec *codec;
- list_for_each(p, &bus->codec_list) {
- struct hda_codec *codec = list_entry(p, struct hda_codec, list);
+ list_for_each_entry(codec, &bus->codec_list, list) {
hda_set_power_state(codec,
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D0);
@@ -2260,8 +2389,6 @@
return 0;
}
-EXPORT_SYMBOL(snd_hda_resume);
-
/**
* snd_hda_resume_ctls - resume controls in the new control list
* @codec: the HDA codec
@@ -2276,7 +2403,7 @@
struct snd_ctl_elem_value *val;
val = kmalloc(sizeof(*val), GFP_KERNEL);
- if (! val)
+ if (!val)
return -ENOMEM;
codec->in_resume = 1;
for (; knew->name; knew++) {
@@ -2320,19 +2447,3 @@
return snd_hda_resume_ctls(codec, dig_in_ctls);
}
#endif
-
-/*
- * INIT part
- */
-
-static int __init alsa_hda_init(void)
-{
- return 0;
-}
-
-static void __exit alsa_hda_exit(void)
-{
-}
-
-module_init(alsa_hda_init)
-module_exit(alsa_hda_exit)
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index c12bc4e..56c26e7 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -233,7 +233,7 @@
*/
/* Amp gain/mute */
-#define AC_AMP_MUTE (1<<8)
+#define AC_AMP_MUTE (1<<7)
#define AC_AMP_GAIN (0x7f)
#define AC_AMP_GET_INDEX (0xf<<0)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 1e5ff0c..000287f 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -133,7 +133,7 @@
return -ENOMEM;
}
}
- memcpy(node->conn_list, conn_list, nconns);
+ memcpy(node->conn_list, conn_list, nconns * sizeof(hda_nid_t));
node->nconns = nconns;
node->wid_caps = get_wcaps(codec, nid);
node->type = (node->wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 1672cac..2fa281c 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -88,6 +88,8 @@
"{ATI, SB600},"
"{ATI, RS600},"
"{ATI, RS690},"
+ "{ATI, RS780},"
+ "{ATI, R600},"
"{VIA, VT8251},"
"{VIA, VT8237A},"
"{SiS, SIS966},"
@@ -198,6 +200,7 @@
#define RIRB_INT_MASK 0x05
/* STATESTS int mask: SD2,SD1,SD0 */
+#define AZX_MAX_CODECS 3
#define STATESTS_INT_MASK 0x07
/* SD_CTL bits */
@@ -978,7 +981,7 @@
static int __devinit azx_codec_create(struct azx *chip, const char *model)
{
struct hda_bus_template bus_temp;
- int c, codecs, err;
+ int c, codecs, audio_codecs, err;
memset(&bus_temp, 0, sizeof(bus_temp));
bus_temp.private_data = chip;
@@ -990,16 +993,30 @@
if ((err = snd_hda_bus_new(chip->card, &bus_temp, &chip->bus)) < 0)
return err;
- codecs = 0;
- for (c = 0; c < azx_max_codecs[chip->driver_type]; c++) {
+ codecs = audio_codecs = 0;
+ for (c = 0; c < AZX_MAX_CODECS; c++) {
if ((chip->codec_mask & (1 << c)) & probe_mask) {
- err = snd_hda_codec_new(chip->bus, c, NULL);
+ struct hda_codec *codec;
+ err = snd_hda_codec_new(chip->bus, c, &codec);
if (err < 0)
continue;
codecs++;
+ if (codec->afg)
+ audio_codecs++;
}
}
- if (! codecs) {
+ if (!audio_codecs) {
+ /* probe additional slots if no codec is found */
+ for (; c < azx_max_codecs[chip->driver_type]; c++) {
+ if ((chip->codec_mask & (1 << c)) & probe_mask) {
+ err = snd_hda_codec_new(chip->bus, c, NULL);
+ if (err < 0)
+ continue;
+ codecs++;
+ }
+ }
+ }
+ if (!codecs) {
snd_printk(KERN_ERR SFX "no codecs initialized\n");
return -ENXIO;
}
@@ -1518,7 +1535,7 @@
/*
* white/black-listing for position_fix
*/
-static const struct snd_pci_quirk position_fix_list[] __devinitdata = {
+static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_NONE),
{}
};
@@ -1758,6 +1775,8 @@
{ 0x1002, 0x4383, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATI }, /* ATI SB600 */
{ 0x1002, 0x793b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATIHDMI }, /* ATI RS600 HDMI */
{ 0x1002, 0x7919, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATIHDMI }, /* ATI RS690 HDMI */
+ { 0x1002, 0x960c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATIHDMI }, /* ATI RS780 HDMI */
+ { 0x1002, 0xaa00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ATIHDMI }, /* ATI R600 HDMI */
{ 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_VIA }, /* VIA VT8251/VT8237A */
{ 0x1039, 0x7502, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_SIS }, /* SIS966 */
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ULI }, /* ULI M5461 */
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 39718d6..be12b88 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -148,6 +148,11 @@
int snd_hda_multi_out_dig_open(struct hda_codec *codec, struct hda_multi_out *mout);
int snd_hda_multi_out_dig_close(struct hda_codec *codec, struct hda_multi_out *mout);
+int snd_hda_multi_out_dig_prepare(struct hda_codec *codec,
+ struct hda_multi_out *mout,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream);
int snd_hda_multi_out_analog_open(struct hda_codec *codec, struct hda_multi_out *mout,
struct snd_pcm_substream *substream);
int snd_hda_multi_out_analog_prepare(struct hda_codec *codec, struct hda_multi_out *mout,
@@ -217,6 +222,12 @@
AUTO_PIN_LAST
};
+enum {
+ AUTO_PIN_LINE_OUT,
+ AUTO_PIN_SPEAKER_OUT,
+ AUTO_PIN_HP_OUT
+};
+
extern const char *auto_pin_cfg_labels[AUTO_PIN_LAST];
struct auto_pin_cfg {
@@ -225,6 +236,7 @@
int speaker_outs;
hda_nid_t speaker_pins[5];
int hp_outs;
+ int line_out_type; /* AUTO_PIN_XXX_OUT */
hda_nid_t hp_pins[5];
hda_nid_t input_pins[AUTO_PIN_LAST];
hda_nid_t dig_out_pin;
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index f94f1f22..0e1a879 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -192,6 +192,17 @@
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
+static int ad198x_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct ad198x_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+ format, substream);
+}
+
/*
* Analog capture
*/
@@ -250,7 +261,8 @@
.nid = 0, /* fill later */
.ops = {
.open = ad198x_dig_playback_pcm_open,
- .close = ad198x_dig_playback_pcm_close
+ .close = ad198x_dig_playback_pcm_close,
+ .prepare = ad198x_dig_playback_pcm_prepare
},
};
@@ -739,41 +751,35 @@
{ } /* end */
};
-/* additional verbs for 3-stack model */
-static struct hda_verb ad1986a_3st_init_verbs[] = {
- /* Mic and line-in selectors */
- {0x0f, AC_VERB_SET_CONNECT_SEL, 0x2},
- {0x10, AC_VERB_SET_CONNECT_SEL, 0x1},
- { } /* end */
-};
-
static struct hda_verb ad1986a_ch2_init[] = {
/* Surround out -> Line In */
- { 0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- { 0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+ { 0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ /* Line-in selectors */
+ { 0x10, AC_VERB_SET_CONNECT_SEL, 0x1 },
/* CLFE -> Mic in */
- { 0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- { 0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+ { 0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ /* Mic selector, mix C/LFE (backmic) and Mic (frontmic) */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x4 },
{ } /* end */
};
static struct hda_verb ad1986a_ch4_init[] = {
/* Surround out -> Surround */
- { 0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ { 0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x10, AC_VERB_SET_CONNECT_SEL, 0x0 },
/* CLFE -> Mic in */
- { 0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
- { 0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+ { 0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x4 },
{ } /* end */
};
static struct hda_verb ad1986a_ch6_init[] = {
/* Surround out -> Surround out */
- { 0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x1c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ { 0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x10, AC_VERB_SET_CONNECT_SEL, 0x0 },
/* CLFE -> CLFE */
- { 0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
- { 0x1d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ { 0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x0 },
{ } /* end */
};
@@ -828,6 +834,7 @@
SND_PCI_QUIRK(0x1043, 0x1297, "ASUS Z62F", AD1986A_LAPTOP_EAPD),
SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS V1j", AD1986A_LAPTOP_EAPD),
SND_PCI_QUIRK(0x1043, 0x1302, "ASUS W3j", AD1986A_LAPTOP_EAPD),
+ SND_PCI_QUIRK(0x1043, 0x1447, "ASUS A8J", AD1986A_3STACK),
SND_PCI_QUIRK(0x1043, 0x817f, "ASUS P5", AD1986A_3STACK),
SND_PCI_QUIRK(0x1043, 0x818f, "ASUS P5", AD1986A_LAPTOP),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS P5", AD1986A_3STACK),
@@ -882,9 +889,8 @@
case AD1986A_3STACK:
spec->num_mixers = 2;
spec->mixers[1] = ad1986a_3st_mixers;
- spec->num_init_verbs = 3;
- spec->init_verbs[1] = ad1986a_3st_init_verbs;
- spec->init_verbs[2] = ad1986a_ch2_init;
+ spec->num_init_verbs = 2;
+ spec->init_verbs[1] = ad1986a_ch2_init;
spec->channel_mode = ad1986a_modes;
spec->num_channel_mode = ARRAY_SIZE(ad1986a_modes);
spec->need_dac_fix = 1;
@@ -1892,8 +1898,9 @@
sel = snd_hda_codec_read(codec, 0x02, 0, AC_VERB_GET_CONNECT_SEL, 0);
if (sel > 0) {
- sel = snd_hda_codec_read(codec, 0x0b, 0, AC_VERB_GET_CONNECT_SEL, 0);
- if (sel <= 3)
+ sel = snd_hda_codec_read(codec, 0x0b, 0,
+ AC_VERB_GET_CONNECT_SEL, 0);
+ if (sel < 3)
sel++;
else
sel = 0;
@@ -1906,23 +1913,27 @@
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- unsigned int sel;
+ unsigned int val, sel;
int change;
+ val = ucontrol->value.enumerated.item[0];
sel = snd_hda_codec_read(codec, 0x02, 0, AC_VERB_GET_CONNECT_SEL, 0);
- if (! ucontrol->value.enumerated.item[0]) {
+ if (!val) {
change = sel != 0;
- if (change)
- snd_hda_codec_write(codec, 0x02, 0, AC_VERB_SET_CONNECT_SEL, 0);
+ if (change || codec->in_resume)
+ snd_hda_codec_write(codec, 0x02, 0,
+ AC_VERB_SET_CONNECT_SEL, 0);
} else {
change = sel == 0;
- if (change)
- snd_hda_codec_write(codec, 0x02, 0, AC_VERB_SET_CONNECT_SEL, 1);
- sel = snd_hda_codec_read(codec, 0x0b, 0, AC_VERB_GET_CONNECT_SEL, 0) + 1;
- change |= sel == ucontrol->value.enumerated.item[0];
- if (change)
- snd_hda_codec_write(codec, 0x02, 0, AC_VERB_SET_CONNECT_SEL,
- ucontrol->value.enumerated.item[0] - 1);
+ if (change || codec->in_resume)
+ snd_hda_codec_write(codec, 0x02, 0,
+ AC_VERB_SET_CONNECT_SEL, 1);
+ sel = snd_hda_codec_read(codec, 0x0b, 0,
+ AC_VERB_GET_CONNECT_SEL, 0) + 1;
+ change |= sel != val;
+ if (change || codec->in_resume)
+ snd_hda_codec_write(codec, 0x0b, 0,
+ AC_VERB_SET_CONNECT_SEL, val - 1);
}
return change;
}
diff --git a/sound/pci/hda/patch_atihdmi.c b/sound/pci/hda/patch_atihdmi.c
index 831469d..f8eb4c9 100644
--- a/sound/pci/hda/patch_atihdmi.c
+++ b/sound/pci/hda/patch_atihdmi.c
@@ -94,6 +94,17 @@
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
+static int atihdmi_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct atihdmi_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+ format, substream);
+}
+
static struct hda_pcm_stream atihdmi_pcm_digital_playback = {
.substreams = 1,
.channels_min = 2,
@@ -101,7 +112,8 @@
.nid = 0x2, /* NID to query formats and rates and setup streams */
.ops = {
.open = atihdmi_dig_playback_pcm_open,
- .close = atihdmi_dig_playback_pcm_close
+ .close = atihdmi_dig_playback_pcm_close,
+ .prepare = atihdmi_dig_playback_pcm_prepare
},
};
@@ -160,6 +172,7 @@
*/
struct hda_codec_preset snd_hda_preset_atihdmi[] = {
{ .id = 0x1002793c, .name = "ATI RS600 HDMI", .patch = patch_atihdmi },
- { .id = 0x1002791a, .name = "ATI RS690 HDMI", .patch = patch_atihdmi },
+ { .id = 0x1002791a, .name = "ATI RS690/780 HDMI", .patch = patch_atihdmi },
+ { .id = 0x1002aa01, .name = "ATI R600 HDMI", .patch = patch_atihdmi },
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 5b9d3a3..3c722e6 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -497,6 +497,17 @@
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
+static int cmi9880_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct cmi_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+ format, substream);
+}
+
/*
* Analog capture
*/
@@ -556,7 +567,8 @@
/* NID is set in cmi9880_build_pcms */
.ops = {
.open = cmi9880_dig_playback_pcm_open,
- .close = cmi9880_dig_playback_pcm_close
+ .close = cmi9880_dig_playback_pcm_close,
+ .prepare = cmi9880_dig_playback_pcm_prepare
},
};
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 46e93c6..a5a4b2b 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -136,6 +136,18 @@
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
+static int conexant_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct conexant_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+ stream_tag,
+ format, substream);
+}
+
/*
* Analog capture
*/
@@ -194,7 +206,8 @@
.nid = 0, /* fill later */
.ops = {
.open = conexant_dig_playback_pcm_open,
- .close = conexant_dig_playback_pcm_close
+ .close = conexant_dig_playback_pcm_close,
+ .prepare = conexant_dig_playback_pcm_prepare
},
};
@@ -452,115 +465,6 @@
.put = conexant_ch_mode_put, \
.private_value = nid | (dir<<16) }
-static int cxt_gpio_data_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
-}
-
-static int cxt_gpio_data_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
- unsigned int val = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_GPIO_DATA, 0x00);
-
- *valp = (val & mask) != 0;
- return 0;
-}
-
-static int cxt_gpio_data_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long val = *ucontrol->value.integer.value;
- unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_GPIO_DATA,
- 0x00);
- unsigned int old_data = gpio_data;
-
- /* Set/unset the masked GPIO bit(s) as needed */
- if (val == 0)
- gpio_data &= ~mask;
- else
- gpio_data |= mask;
- if (gpio_data == old_data && !codec->in_resume)
- return 0;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_GPIO_DATA, gpio_data);
- return 1;
-}
-
-#define CXT_GPIO_DATA_SWITCH(xname, nid, mask) \
- { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .info = cxt_gpio_data_info, \
- .get = cxt_gpio_data_get, \
- .put = cxt_gpio_data_put, \
- .private_value = nid | (mask<<16) }
-#if 0
-static int cxt_spdif_ctrl_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
-}
-
-static int cxt_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
- unsigned int val = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_DIGI_CONVERT, 0x00);
-
- *valp = (val & mask) != 0;
- return 0;
-}
-
-static int cxt_spdif_ctrl_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- hda_nid_t nid = kcontrol->private_value & 0xffff;
- unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
- long val = *ucontrol->value.integer.value;
- unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_DIGI_CONVERT,
- 0x00);
- unsigned int old_data = ctrl_data;
-
- /* Set/unset the masked control bit(s) as needed */
- if (val == 0)
- ctrl_data &= ~mask;
- else
- ctrl_data |= mask;
- if (ctrl_data == old_data && !codec->in_resume)
- return 0;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
- ctrl_data);
- return 1;
-}
-
-#define CXT_SPDIF_CTRL_SWITCH(xname, nid, mask) \
- { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .info = cxt_spdif_ctrl_info, \
- .get = cxt_spdif_ctrl_get, \
- .put = cxt_spdif_ctrl_put, \
- .private_value = nid | (mask<<16) }
-#endif
#endif /* CONFIG_SND_DEBUG */
/* Conexant 5045 specific */
@@ -599,6 +503,7 @@
bits = (!spec->hp_present && spec->cur_eapd) ? 0 : 0x80;
snd_hda_codec_amp_update(codec, 0x10, 0, HDA_OUTPUT, 0, 0x80, bits);
snd_hda_codec_amp_update(codec, 0x10, 1, HDA_OUTPUT, 0, 0x80, bits);
+
bits = spec->cur_eapd ? 0 : 0x80;
snd_hda_codec_amp_update(codec, 0x11, 0, HDA_OUTPUT, 0, 0x80, bits);
snd_hda_codec_amp_update(codec, 0x11, 1, HDA_OUTPUT, 0, 0x80, bits);
@@ -624,6 +529,29 @@
return change;
}
+/* toggle input of built-in and mic jack appropriately */
+static void cxt5045_hp_automic(struct hda_codec *codec)
+{
+ static struct hda_verb mic_jack_on[] = {
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ {}
+ };
+ static struct hda_verb mic_jack_off[] = {
+ {0x12, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ {}
+ };
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x12, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ if (present)
+ snd_hda_sequence_write(codec, mic_jack_on);
+ else
+ snd_hda_sequence_write(codec, mic_jack_off);
+}
+
/* mute internal speaker if HP is plugged */
static void cxt5045_hp_automute(struct hda_codec *codec)
@@ -634,7 +562,7 @@
spec->hp_present = snd_hda_codec_read(codec, 0x11, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- bits = (spec->hp_present || !spec->cur_eapd) ? 0x80 : 0;
+ bits = (spec->hp_present || !spec->cur_eapd) ? 0x80 : 0;
snd_hda_codec_amp_update(codec, 0x10, 0, HDA_OUTPUT, 0, 0x80, bits);
snd_hda_codec_amp_update(codec, 0x10, 1, HDA_OUTPUT, 0, 0x80, bits);
}
@@ -648,6 +576,10 @@
case CONEXANT_HP_EVENT:
cxt5045_hp_automute(codec);
break;
+ case CONEXANT_MIC_EVENT:
+ cxt5045_hp_automic(codec);
+ break;
+
}
}
@@ -659,12 +591,10 @@
.get = conexant_mux_enum_get,
.put = conexant_mux_enum_put
},
- HDA_CODEC_VOLUME("Int Mic Volume", 0x17, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Int Mic Switch", 0x17, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Ext Mic Volume", 0x17, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Ext Mic Switch", 0x17, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x1a, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x1a, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Int Mic Volume", 0x1a, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Int Mic Switch", 0x1a, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("Ext Mic Volume", 0x1a, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Ext Mic Switch", 0x1a, 0x02, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Volume",
@@ -688,7 +618,7 @@
static struct hda_verb cxt5045_init_verbs[] = {
/* Line in, Mic */
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
- {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_50 },
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_80 },
/* HP, Amp */
{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
{0x17, AC_VERB_SET_CONNECT_SEL,0x01},
@@ -701,18 +631,29 @@
{0x17, AC_VERB_SET_AMP_GAIN_MUTE,
AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x04},
/* Record selector: Int mic */
- {0x1a, AC_VERB_SET_CONNECT_SEL,0x0},
+ {0x1a, AC_VERB_SET_CONNECT_SEL,0x1},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE,
AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17},
/* SPDIF route: PCM */
{ 0x13, AC_VERB_SET_CONNECT_SEL, 0x0 },
- /* pin sensing on HP and Mic jacks */
- {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
/* EAPD */
{0x10, AC_VERB_SET_EAPD_BTLENABLE, 0x2 }, /* default on */
{ } /* end */
};
+
+static struct hda_verb cxt5045_hp_sense_init_verbs[] = {
+ /* pin sensing on HP jack */
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+ { } /* end */
+};
+
+static struct hda_verb cxt5045_mic_sense_init_verbs[] = {
+ /* pin sensing on HP jack */
+ {0x12, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
+ { } /* end */
+};
+
#ifdef CONFIG_SND_DEBUG
/* Test configuration for debugging, modelled after the ALC260 test
* configuration.
@@ -733,6 +674,10 @@
/* Output controls */
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
/* Modes for retasking pin widgets */
CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT),
@@ -742,25 +687,17 @@
CXT_EAPD_SWITCH("External Amplifier", 0x10, 0x0),
/* Loopback mixer controls */
- HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x17, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("MIC1 Playback Switch", 0x17, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("LINE loopback Playback Volume", 0x17, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("LINE loopback Playback Switch", 0x17, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x17, 0x03, HDA_INPUT),
- HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x17, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x17, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x17, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture-1 Volume", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture-1 Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture-2 Volume", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Capture-2 Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture-3 Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Capture-3 Switch", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture-4 Volume", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Capture-4 Switch", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture-5 Volume", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("Capture-5 Switch", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT),
+ HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Source",
@@ -768,14 +705,17 @@
.get = conexant_mux_enum_get,
.put = conexant_mux_enum_put,
},
-
{ } /* end */
};
static struct hda_verb cxt5045_test_init_verbs[] = {
+ /* Set connections */
+ { 0x10, AC_VERB_SET_CONNECT_SEL, 0x0 },
+ { 0x11, AC_VERB_SET_CONNECT_SEL, 0x0 },
+ { 0x12, AC_VERB_SET_CONNECT_SEL, 0x0 },
/* Enable retasking pins as output, initially without power amp */
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
- {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* Disable digital (SPDIF) pins initially, but users can enable
* them via a mixer switch. In the case of SPDIF-out, this initverb
@@ -804,6 +744,7 @@
* pin)
*/
{0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
/* Mute all inputs to mixer widget (even unconnected ones) */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */
@@ -827,7 +768,8 @@
enum {
- CXT5045_LAPTOP, /* Laptops w/ EAPD support */
+ CXT5045_LAPTOP, /* Laptops w/ EAPD support */
+ CXT5045_FUJITSU, /* Laptops w/ EAPD support */
#ifdef CONFIG_SND_DEBUG
CXT5045_TEST,
#endif
@@ -836,6 +778,7 @@
static const char *cxt5045_models[CXT5045_MODELS] = {
[CXT5045_LAPTOP] = "laptop",
+ [CXT5045_FUJITSU] = "fujitsu",
#ifdef CONFIG_SND_DEBUG
[CXT5045_TEST] = "test",
#endif
@@ -844,7 +787,11 @@
static struct snd_pci_quirk cxt5045_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30b7, "HP DV6000Z", CXT5045_LAPTOP),
SND_PCI_QUIRK(0x103c, 0x30bb, "HP DV8000", CXT5045_LAPTOP),
- SND_PCI_QUIRK(0x1734, 0x10ad, "Fujitsu Si1520", CXT5045_LAPTOP),
+ SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV Series", CXT5045_LAPTOP),
+ SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2120", CXT5045_LAPTOP),
+ SND_PCI_QUIRK(0x103c, 0x30cd, "HP DV Series", CXT5045_LAPTOP),
+ SND_PCI_QUIRK(0x1734, 0x10ad, "Fujitsu Si1520", CXT5045_FUJITSU),
+ SND_PCI_QUIRK(0x8086, 0x2111, "Conexant Reference board", CXT5045_LAPTOP),
{}
};
@@ -877,16 +824,23 @@
codec->patch_ops = conexant_patch_ops;
- codec->patch_ops.unsol_event = cxt5045_hp_unsol_event;
board_config = snd_hda_check_board_config(codec, CXT5045_MODELS,
cxt5045_models,
cxt5045_cfg_tbl);
switch (board_config) {
case CXT5045_LAPTOP:
+ codec->patch_ops.unsol_event = cxt5045_hp_unsol_event;
spec->input_mux = &cxt5045_capture_source;
spec->num_init_verbs = 2;
- spec->init_verbs[1] = cxt5045_init_verbs;
+ spec->init_verbs[1] = cxt5045_hp_sense_init_verbs;
+ spec->mixers[0] = cxt5045_mixers;
+ codec->patch_ops.init = cxt5045_init;
+ break;
+ case CXT5045_FUJITSU:
+ spec->input_mux = &cxt5045_capture_source;
+ spec->num_init_verbs = 2;
+ spec->init_verbs[1] = cxt5045_mic_sense_init_verbs;
spec->mixers[0] = cxt5045_mixers;
codec->patch_ops.init = cxt5045_init;
break;
@@ -913,10 +867,9 @@
};
static struct hda_input_mux cxt5047_capture_source = {
- .num_items = 2,
+ .num_items = 1,
.items = {
- { "ExtMic", 0x0 },
- { "IntMic", 0x1 },
+ { "Mic", 0x2 },
}
};
@@ -1009,7 +962,7 @@
};
unsigned int present;
- present = snd_hda_codec_read(codec, 0x08, 0,
+ present = snd_hda_codec_read(codec, 0x15, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
if (present)
snd_hda_sequence_write(codec, mic_jack_on);
@@ -1033,37 +986,20 @@
}
static struct snd_kcontrol_new cxt5047_mixers[] = {
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = conexant_mux_enum_info,
- .get = conexant_mux_enum_get,
- .put = conexant_mux_enum_put
- },
HDA_CODEC_VOLUME("Mic Bypass Capture Volume", 0x19, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Mic Bypass Capture Switch", 0x19, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Gain Volume", 0x1a, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Mic Gain Switch", 0x1a, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x12, 0x03, HDA_INPUT),
HDA_CODEC_VOLUME("PCM Volume", 0x10, 0x00, HDA_OUTPUT),
HDA_CODEC_MUTE("PCM Switch", 0x10, 0x00, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM-2 Volume", 0x1c, 0x00, HDA_OUTPUT),
HDA_CODEC_MUTE("PCM-2 Switch", 0x1c, 0x00, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Volume",
- .info = snd_hda_mixer_amp_volume_info,
- .get = snd_hda_mixer_amp_volume_get,
- .put = cxt5047_hp_master_vol_put,
- .private_value = HDA_COMPOSE_AMP_VAL(0x13, 3, 0, HDA_OUTPUT),
- },
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Playback Switch",
- .info = cxt_eapd_info,
- .get = cxt_eapd_get,
- .put = cxt5047_hp_master_sw_put,
- .private_value = 0x13,
- },
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x1d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x1d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x13, 0x00, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x13, 0x00, HDA_OUTPUT),
{}
};
@@ -1133,18 +1069,19 @@
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_50 },
{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_50 },
- /* HP, Amp, Speaker */
- {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
- {0x1A, AC_VERB_SET_CONNECT_SEL,0x00},
+ /* HP, Speaker */
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
+ {0x13, AC_VERB_SET_CONNECT_SEL,0x1},
+ {0x1d, AC_VERB_SET_CONNECT_SEL,0x0},
+ /* Record selector: Mic */
+ {0x12, AC_VERB_SET_CONNECT_SEL,0x03},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE,
+ AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17},
+ {0x1A, AC_VERB_SET_CONNECT_SEL,0x02},
{0x1A, AC_VERB_SET_AMP_GAIN_MUTE,
AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x00},
{0x1A, AC_VERB_SET_AMP_GAIN_MUTE,
AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x03},
- {0x1d, AC_VERB_SET_CONNECT_SEL,0x0},
- /* Record selector: Front mic */
- {0x12, AC_VERB_SET_CONNECT_SEL,0x03},
- {0x19, AC_VERB_SET_AMP_GAIN_MUTE,
- AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17},
/* SPDIF route: PCM */
{ 0x18, AC_VERB_SET_CONNECT_SEL, 0x0 },
/* Enable unsolicited events */
@@ -1161,8 +1098,6 @@
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
/* Speaker routing */
{0x1d, AC_VERB_SET_CONNECT_SEL,0x1},
- /* Change default to ExtMic for recording */
- {0x1a, AC_VERB_SET_CONNECT_SEL,0x2},
{}
};
@@ -1172,7 +1107,6 @@
{0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
/* Record selector: Ext Mic */
{0x12, AC_VERB_SET_CONNECT_SEL,0x03},
- {0x1a, AC_VERB_SET_CONNECT_SEL,0x02},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE,
AC_AMP_SET_INPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x17},
/* Speaker routing */
@@ -1242,14 +1176,6 @@
.get = conexant_mux_enum_get,
.put = conexant_mux_enum_put,
},
- /* Controls for GPIO pins, assuming they exist and are configured
- * as outputs
- */
- CXT_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
- CXT_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
- CXT_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
- CXT_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
-
{ } /* end */
};
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index fba3cb1..a4ede27 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -74,6 +74,8 @@
ALC260_HP_3013,
ALC260_FUJITSU_S702X,
ALC260_ACER,
+ ALC260_WILL,
+ ALC260_REPLACER_672V,
#ifdef CONFIG_SND_DEBUG
ALC260_TEST,
#endif
@@ -115,15 +117,28 @@
ALC861VD_3ST,
ALC861VD_3ST_DIG,
ALC861VD_6ST_DIG,
+ ALC861VD_LENOVO,
ALC861VD_AUTO,
ALC861VD_MODEL_LAST,
};
+/* ALC662 models */
+enum {
+ ALC662_3ST_2ch_DIG,
+ ALC662_3ST_6ch_DIG,
+ ALC662_3ST_6ch,
+ ALC662_5ST_DIG,
+ ALC662_LENOVO_101E,
+ ALC662_AUTO,
+ ALC662_MODEL_LAST,
+};
+
/* ALC882 models */
enum {
ALC882_3ST_DIG,
ALC882_6ST_DIG,
ALC882_ARIMA,
+ ALC882_W2JC,
ALC882_AUTO,
ALC885_MACPRO,
ALC882_MODEL_LAST,
@@ -141,6 +156,7 @@
ALC883_ACER,
ALC883_MEDION,
ALC883_LAPTOP_EAPD,
+ ALC883_LENOVO_101E_2ch,
ALC883_AUTO,
ALC883_MODEL_LAST,
};
@@ -163,7 +179,7 @@
struct hda_pcm_stream *stream_analog_playback;
struct hda_pcm_stream *stream_analog_capture;
- char *stream_name_digital; /* digital PCM stream */
+ char *stream_name_digital; /* digital PCM stream */
struct hda_pcm_stream *stream_digital_playback;
struct hda_pcm_stream *stream_digital_capture;
@@ -401,7 +417,7 @@
AC_VERB_GET_PIN_WIDGET_CONTROL,
0x00);
- if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
+ if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
val = alc_pin_mode_min(dir);
change = pinctl != alc_pin_mode_values[val];
@@ -460,7 +476,8 @@
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
return 0;
-}
+}
+
static int alc_gpio_data_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -520,7 +537,8 @@
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
return 0;
-}
+}
+
static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -592,7 +610,7 @@
spec->multiout.hp_nid = preset->hp_nid;
spec->num_mux_defs = preset->num_mux_defs;
- if (! spec->num_mux_defs)
+ if (!spec->num_mux_defs)
spec->num_mux_defs = 1;
spec->input_mux = preset->input_mux;
@@ -604,6 +622,90 @@
spec->init_hook = preset->init_hook;
}
+/* Enable GPIO mask and set output */
+static struct hda_verb alc_gpio1_init_verbs[] = {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+ { }
+};
+
+static struct hda_verb alc_gpio2_init_verbs[] = {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02},
+ { }
+};
+
+static struct hda_verb alc_gpio3_init_verbs[] = {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x03},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x03},
+ { }
+};
+
+/* 32-bit subsystem ID for BIOS loading in HD Audio codec.
+ * 31 ~ 16 : Manufacture ID
+ * 15 ~ 8 : SKU ID
+ * 7 ~ 0 : Assembly ID
+ * port-A --> pin 39/41, port-E --> pin 14/15, port-D --> pin 35/36
+ */
+static void alc_subsystem_id(struct hda_codec *codec,
+ unsigned int porta, unsigned int porte,
+ unsigned int portd)
+{
+ unsigned int ass, tmp;
+
+ ass = codec->subsystem_id;
+ if (!(ass & 1))
+ return;
+
+ /* Override */
+ tmp = (ass & 0x38) >> 3; /* external Amp control */
+ switch (tmp) {
+ case 1:
+ snd_hda_sequence_write(codec, alc_gpio1_init_verbs);
+ break;
+ case 3:
+ snd_hda_sequence_write(codec, alc_gpio2_init_verbs);
+ break;
+ case 7:
+ snd_hda_sequence_write(codec, alc_gpio3_init_verbs);
+ break;
+ case 5:
+ switch (codec->vendor_id) {
+ case 0x10ec0862:
+ case 0x10ec0660:
+ case 0x10ec0662:
+ case 0x10ec0267:
+ case 0x10ec0268:
+ snd_hda_codec_write(codec, 0x14, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 2);
+ snd_hda_codec_write(codec, 0x15, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 2);
+ return;
+ }
+ case 6:
+ if (ass & 4) { /* bit 2 : 0 = Desktop, 1 = Laptop */
+ hda_nid_t port = 0;
+ tmp = (ass & 0x1800) >> 11;
+ switch (tmp) {
+ case 0: port = porta; break;
+ case 1: port = porte; break;
+ case 2: port = portd; break;
+ }
+ if (port)
+ snd_hda_codec_write(codec, port, 0,
+ AC_VERB_SET_EAPD_BTLENABLE,
+ 2);
+ }
+ snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
+ snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PROC_COEF,
+ (tmp == 5 ? 0x3040 : 0x3050));
+ break;
+ }
+}
+
/*
* ALC880 3-stack model
*
@@ -801,7 +903,7 @@
static hda_nid_t alc880_6st_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
-};
+};
static struct hda_input_mux alc880_6stack_capture_source = {
.num_items = 4,
@@ -1409,25 +1511,43 @@
};
/* toggle speaker-output according to the hp-jack state */
-static void alc880_uniwill_automute(struct hda_codec *codec)
+static void alc880_uniwill_hp_automute(struct hda_codec *codec)
{
unsigned int present;
+ unsigned char bits;
present = snd_hda_codec_read(codec, 0x14, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x16, 0, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x16, 1, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
+}
+
+/* auto-toggle front mic */
+static void alc880_uniwill_mic_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
present = snd_hda_codec_read(codec, 0x18, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
- snd_hda_codec_write(codec, 0x0b, 0, AC_VERB_SET_AMP_GAIN_MUTE,
- 0x7000 | (0x01 << 8) | (present ? 0x80 : 0));
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x0b, 0, HDA_INPUT, 1,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x0b, 1, HDA_INPUT, 1,
+ 0x80, bits);
+}
+
+static void alc880_uniwill_automute(struct hda_codec *codec)
+{
+ alc880_uniwill_hp_automute(codec);
+ alc880_uniwill_mic_automute(codec);
}
static void alc880_uniwill_unsol_event(struct hda_codec *codec,
@@ -1436,22 +1556,28 @@
/* Looks like the unsol event is incompatible with the standard
* definition. 4bit tag is placed at 28 bit!
*/
- if ((res >> 28) == ALC880_HP_EVENT ||
- (res >> 28) == ALC880_MIC_EVENT)
- alc880_uniwill_automute(codec);
+ switch (res >> 28) {
+ case ALC880_HP_EVENT:
+ alc880_uniwill_hp_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc880_uniwill_mic_automute(codec);
+ break;
+ }
}
static void alc880_uniwill_p53_hp_automute(struct hda_codec *codec)
{
unsigned int present;
+ unsigned char bits;
present = snd_hda_codec_read(codec, 0x14, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-
+ bits = present ? 0x80 : 0;
snd_hda_codec_amp_update(codec, 0x15, 0, HDA_INPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x15, 1, HDA_INPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
}
static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
@@ -1480,7 +1606,7 @@
*/
if ((res >> 28) == ALC880_HP_EVENT)
alc880_uniwill_p53_hp_automute(codec);
- if ((res >> 28) == ALC880_DCVOL_EVENT)
+ if ((res >> 28) == ALC880_DCVOL_EVENT)
alc880_uniwill_p53_dcvol_automute(codec);
}
@@ -1547,22 +1673,8 @@
};
/* Enable GPIO mask and set output */
-static struct hda_verb alc880_gpio1_init_verbs[] = {
- {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
-
- { }
-};
-
-/* Enable GPIO mask and set output */
-static struct hda_verb alc880_gpio2_init_verbs[] = {
- {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x02},
-
- { }
-};
+#define alc880_gpio1_init_verbs alc_gpio1_init_verbs
+#define alc880_gpio2_init_verbs alc_gpio2_init_verbs
/* Clevo m520g init */
static struct hda_verb alc880_pin_clevo_init_verbs[] = {
@@ -1734,13 +1846,15 @@
static void alc880_lg_automute(struct hda_codec *codec)
{
unsigned int present;
+ unsigned char bits;
present = snd_hda_codec_read(codec, 0x1b, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
snd_hda_codec_amp_update(codec, 0x17, 0, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x17, 1, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
}
static void alc880_lg_unsol_event(struct hda_codec *codec, unsigned int res)
@@ -1810,13 +1924,15 @@
static void alc880_lg_lw_automute(struct hda_codec *codec)
{
unsigned int present;
+ unsigned char bits;
present = snd_hda_codec_read(codec, 0x1b, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
}
static void alc880_lg_lw_unsol_event(struct hda_codec *codec, unsigned int res)
@@ -1916,6 +2032,17 @@
return snd_hda_multi_out_dig_open(codec, &spec->multiout);
}
+static int alc880_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct alc_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+ stream_tag, format, substream);
+}
+
static int alc880_dig_playback_pcm_close(struct hda_pcm_stream *hinfo,
struct hda_codec *codec,
struct snd_pcm_substream *substream)
@@ -1984,7 +2111,8 @@
/* NID is set in alc_build_pcms */
.ops = {
.open = alc880_dig_playback_pcm_open,
- .close = alc880_dig_playback_pcm_close
+ .close = alc880_dig_playback_pcm_close,
+ .prepare = alc880_dig_playback_pcm_prepare
},
};
@@ -2075,7 +2203,7 @@
struct alc_spec *spec = codec->spec;
unsigned int i;
- if (! spec)
+ if (!spec)
return;
if (spec->kctl_alloc) {
@@ -2477,7 +2605,8 @@
static struct alc_config_preset alc880_presets[] = {
[ALC880_3ST] = {
.mixers = { alc880_three_stack_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_3stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
@@ -2487,7 +2616,8 @@
},
[ALC880_3ST_DIG] = {
.mixers = { alc880_three_stack_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_3stack_init_verbs },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_3stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
@@ -2509,8 +2639,10 @@
.input_mux = &alc880_capture_source,
},
[ALC880_5ST] = {
- .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer},
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
+ .mixers = { alc880_three_stack_mixer,
+ alc880_five_stack_mixer},
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_5stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
@@ -2518,8 +2650,10 @@
.input_mux = &alc880_capture_source,
},
[ALC880_5ST_DIG] = {
- .mixers = { alc880_three_stack_mixer, alc880_five_stack_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_5stack_init_verbs },
+ .mixers = { alc880_three_stack_mixer,
+ alc880_five_stack_mixer },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_5stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
@@ -2529,7 +2663,8 @@
},
[ALC880_6ST] = {
.mixers = { alc880_six_stack_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_6stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
.dac_nids = alc880_6st_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
@@ -2538,7 +2673,8 @@
},
[ALC880_6ST_DIG] = {
.mixers = { alc880_six_stack_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_6stack_init_verbs },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_6stack_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
.dac_nids = alc880_6st_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
@@ -2548,7 +2684,8 @@
},
[ALC880_W810] = {
.mixers = { alc880_w810_base_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_w810_init_verbs,
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_w810_init_verbs,
alc880_gpio2_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
.dac_nids = alc880_w810_dac_nids,
@@ -2559,7 +2696,8 @@
},
[ALC880_Z71V] = {
.mixers = { alc880_z71v_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_z71v_init_verbs },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_z71v_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids),
.dac_nids = alc880_z71v_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
@@ -2570,7 +2708,8 @@
},
[ALC880_F1734] = {
.mixers = { alc880_f1734_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_f1734_init_verbs },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_f1734_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids),
.dac_nids = alc880_f1734_dac_nids,
.hp_nid = 0x02,
@@ -2580,7 +2719,8 @@
},
[ALC880_ASUS] = {
.mixers = { alc880_asus_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_asus_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
@@ -2591,7 +2731,8 @@
},
[ALC880_ASUS_DIG] = {
.mixers = { alc880_asus_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_asus_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
@@ -2603,7 +2744,8 @@
},
[ALC880_ASUS_DIG2] = {
.mixers = { alc880_asus_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_asus_init_verbs,
alc880_gpio2_init_verbs }, /* use GPIO2 */
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
@@ -2615,7 +2757,8 @@
},
[ALC880_ASUS_W1V] = {
.mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
- .init_verbs = { alc880_volume_init_verbs, alc880_pin_asus_init_verbs,
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_pin_asus_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
@@ -2664,7 +2807,7 @@
.init_hook = alc880_uniwill_p53_hp_automute,
},
[ALC880_FUJITSU] = {
- .mixers = { alc880_fujitsu_mixer,
+ .mixers = { alc880_fujitsu_mixer,
alc880_pcbeep_mixer, },
.init_verbs = { alc880_volume_init_verbs,
alc880_uniwill_p53_init_verbs,
@@ -2707,7 +2850,7 @@
.mixers = { alc880_lg_lw_mixer },
.init_verbs = { alc880_volume_init_verbs,
alc880_lg_lw_init_verbs },
- .num_dacs = 1,
+ .num_dacs = 1,
.dac_nids = alc880_dac_nids,
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
@@ -2749,18 +2892,21 @@
};
/* add dynamic controls */
-static int add_control(struct alc_spec *spec, int type, const char *name, unsigned long val)
+static int add_control(struct alc_spec *spec, int type, const char *name,
+ unsigned long val)
{
struct snd_kcontrol_new *knew;
if (spec->num_kctl_used >= spec->num_kctl_alloc) {
int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
- knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
- if (! knew)
+ /* array + terminator */
+ knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL);
+ if (!knew)
return -ENOMEM;
if (spec->kctl_alloc) {
- memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
+ memcpy(knew, spec->kctl_alloc,
+ sizeof(*knew) * spec->num_kctl_alloc);
kfree(spec->kctl_alloc);
}
spec->kctl_alloc = knew;
@@ -2770,7 +2916,7 @@
knew = &spec->kctl_alloc[spec->num_kctl_used];
*knew = alc880_control_templates[type];
knew->name = kstrdup(name, GFP_KERNEL);
- if (! knew->name)
+ if (!knew->name)
return -ENOMEM;
knew->private_value = val;
spec->num_kctl_used++;
@@ -2790,7 +2936,8 @@
#define ALC880_PIN_CD_NID 0x1c
/* fill in the dac_nids table from the parsed pin configuration */
-static int alc880_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+static int alc880_auto_fill_dac_nids(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
{
hda_nid_t nid;
int assigned[4];
@@ -2815,8 +2962,9 @@
continue;
/* search for an empty channel */
for (j = 0; j < cfg->line_outs; j++) {
- if (! assigned[j]) {
- spec->multiout.dac_nids[i] = alc880_idx_to_dac(j);
+ if (!assigned[j]) {
+ spec->multiout.dac_nids[i] =
+ alc880_idx_to_dac(j);
assigned[j] = 1;
break;
}
@@ -2831,36 +2979,54 @@
const struct auto_pin_cfg *cfg)
{
char name[32];
- static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
+ static const char *chname[4] = {
+ "Front", "Surround", NULL /*CLFE*/, "Side"
+ };
hda_nid_t nid;
int i, err;
for (i = 0; i < cfg->line_outs; i++) {
- if (! spec->multiout.dac_nids[i])
+ if (!spec->multiout.dac_nids[i])
continue;
nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
if (i == 2) {
/* Center/LFE */
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Center Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "LFE Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 1, 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 2,
+ HDA_INPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 2,
+ HDA_INPUT));
+ if (err < 0)
return err;
} else {
sprintf(name, "%s Playback Volume", chname[i]);
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
sprintf(name, "%s Playback Switch", chname[i]);
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2,
+ HDA_INPUT));
+ if (err < 0)
return err;
}
}
@@ -2875,51 +3041,57 @@
int err;
char name[32];
- if (! pin)
+ if (!pin)
return 0;
if (alc880_is_fixed_pin(pin)) {
nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
/* specify the DAC as the extra output */
- if (! spec->multiout.hp_nid)
+ if (!spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
else
spec->multiout.extra_out_nid[0] = nid;
/* control HP volume/switch on the output mixer amp */
nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
sprintf(name, "%s Playback Volume", pfx);
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
sprintf(name, "%s Playback Switch", pfx);
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT));
+ if (err < 0)
return err;
} else if (alc880_is_multi_pin(pin)) {
/* set manual connection */
/* we have only a switch on HP-out PIN */
sprintf(name, "%s Playback Switch", pfx);
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
}
return 0;
}
/* create input playback/capture controls for the given pin */
-static int new_analog_input(struct alc_spec *spec, hda_nid_t pin, const char *ctlname,
+static int new_analog_input(struct alc_spec *spec, hda_nid_t pin,
+ const char *ctlname,
int idx, hda_nid_t mix_nid)
{
char name[32];
int err;
sprintf(name, "%s Playback Volume", ctlname);
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT));
+ if (err < 0)
return err;
sprintf(name, "%s Playback Switch", ctlname);
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT));
+ if (err < 0)
return err;
return 0;
}
@@ -2939,8 +3111,10 @@
idx, 0x0b);
if (err < 0)
return err;
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
- imux->items[imux->num_items].index = alc880_input_pin_idx(cfg->input_pins[i]);
+ imux->items[imux->num_items].label =
+ auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].index =
+ alc880_input_pin_idx(cfg->input_pins[i]);
imux->num_items++;
}
}
@@ -2952,8 +3126,10 @@
int dac_idx)
{
/* set as output */
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
/* need the manual connection? */
if (alc880_is_multi_pin(nid)) {
struct alc_spec *spec = codec->spec;
@@ -2964,14 +3140,24 @@
}
}
+static int get_pin_type(int line_out_type)
+{
+ if (line_out_type == AUTO_PIN_HP_OUT)
+ return PIN_HP;
+ else
+ return PIN_OUT;
+}
+
static void alc880_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int i;
-
+
+ alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
for (i = 0; i < spec->autocfg.line_outs; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
- alc880_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
+ alc880_auto_set_output_and_unmute(codec, nid, pin_type, i);
}
}
@@ -2996,37 +3182,52 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if (alc880_is_input_pin(nid)) {
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
- i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ?
+ PIN_VREF80 : PIN_IN);
if (nid != ALC880_PIN_CD_NID)
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_MUTE);
}
}
}
/* parse the BIOS configuration and set up the alc_spec */
-/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
+/* return 1 if successful, 0 if the proper config is not found,
+ * or a negative error code
+ */
static int alc880_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc880_ignore[] = { 0x1d, 0 };
- if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- alc880_ignore)) < 0)
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc880_ignore);
+ if (err < 0)
return err;
- if (! spec->autocfg.line_outs)
+ if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
- (err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = alc880_auto_create_extra_out(spec,
- spec->autocfg.speaker_pins[0],
- "Speaker")) < 0 ||
- (err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
- "Headphone")) < 0 ||
- (err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
+ "Speaker");
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+ "Headphone");
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
@@ -3086,7 +3287,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using 3-stack mode...\n");
@@ -3105,14 +3306,16 @@
spec->stream_digital_playback = &alc880_pcm_digital_playback;
spec->stream_digital_capture = &alc880_pcm_digital_capture;
- if (! spec->adc_nids && spec->input_mux) {
+ if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, alc880_adc_nids[0]);
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ /* get type */
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc880_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
- spec->mixers[spec->num_mixers] = alc880_capture_alt_mixer;
+ spec->mixers[spec->num_mixers] =
+ alc880_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc880_adc_nids;
@@ -3254,7 +3457,7 @@
HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
{ } /* end */
-};
+};
static struct snd_kcontrol_new alc260_input_mixer[] = {
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
@@ -3349,6 +3552,42 @@
{ } /* end */
};
+/* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
+ * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17.
+ */
+static struct snd_kcontrol_new alc260_will_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
+ { } /* end */
+};
+
+/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
+ * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
+ */
+static struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
+ HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
+ ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
+ { } /* end */
+};
+
/* capture mixer elements */
static struct snd_kcontrol_new alc260_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
@@ -3434,7 +3673,9 @@
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* unmute LINE-2 out pin */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+ * Line In 2 = 0x03
+ */
/* mute CD */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* mute Line In */
@@ -3482,7 +3723,9 @@
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+ * Line In 2 = 0x03
+ */
/* unmute CD */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
@@ -3530,7 +3773,9 @@
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
/* mute pin widget amp left and right (no gain on this amp) */
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000},
- /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */
+ /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
+ * Line In 2 = 0x03
+ */
/* unmute CD */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))},
/* unmute Line In */
@@ -3680,7 +3925,9 @@
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- /* Unmute Line-out pin widget amp left and right (no equiv mixer ctrl) */
+ /* Unmute Line-out pin widget amp left and right
+ * (no equiv mixer ctrl)
+ */
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute mono pin widget amp output (no equiv mixer ctrl) */
{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -3719,6 +3966,55 @@
{ }
};
+static struct hda_verb alc260_will_verbs[] = {
+ {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+ {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
+ {}
+};
+
+static struct hda_verb alc260_replacer_672v_verbs[] = {
+ {0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
+ {0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
+
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+
+ {0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
+/* toggle speaker-output according to the hp-jack state */
+static void alc260_replacer_672v_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ /* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
+ present = snd_hda_codec_read(codec, 0x0f, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ if (present) {
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 1);
+ snd_hda_codec_write(codec, 0x0f, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP);
+ } else {
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0);
+ snd_hda_codec_write(codec, 0x0f, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ }
+}
+
+static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc260_replacer_672v_automute(codec);
+}
+
/* Test configuration for debugging, modelled after the ALC880 test
* configuration.
*/
@@ -3946,10 +4242,12 @@
return 0; /* N/A */
snprintf(name, sizeof(name), "%s Playback Volume", pfx);
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val)) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val);
+ if (err < 0)
return err;
snprintf(name, sizeof(name), "%s Playback Switch", pfx);
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val)) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val);
+ if (err < 0)
return err;
return 1;
}
@@ -3985,7 +4283,7 @@
if (err < 0)
return err;
}
- return 0;
+ return 0;
}
/* create playback/capture controls for input pins */
@@ -3999,20 +4297,24 @@
if (cfg->input_pins[i] >= 0x12) {
idx = cfg->input_pins[i] - 0x12;
err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx, 0x07);
+ auto_pin_cfg_labels[i], idx,
+ 0x07);
if (err < 0)
return err;
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].label =
+ auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = idx;
imux->num_items++;
}
- if ((cfg->input_pins[i] >= 0x0f) && (cfg->input_pins[i] <= 0x10)){
+ if (cfg->input_pins[i] >= 0x0f && cfg->input_pins[i] <= 0x10){
idx = cfg->input_pins[i] - 0x09;
err = new_analog_input(spec, cfg->input_pins[i],
- auto_pin_cfg_labels[i], idx, 0x07);
+ auto_pin_cfg_labels[i], idx,
+ 0x07);
if (err < 0)
return err;
- imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].label =
+ auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = idx;
imux->num_items++;
}
@@ -4025,14 +4327,15 @@
int sel_idx)
{
/* set as output */
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
/* need the manual connection? */
if (nid >= 0x12) {
int idx = nid - 0x12;
snd_hda_codec_write(codec, idx + 0x0b, 0,
AC_VERB_SET_CONNECT_SEL, sel_idx);
-
}
}
@@ -4041,9 +4344,12 @@
struct alc_spec *spec = codec->spec;
hda_nid_t nid;
- nid = spec->autocfg.line_out_pins[0];
- if (nid)
- alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
+ alc_subsystem_id(codec, 0x10, 0x15, 0x0f);
+ nid = spec->autocfg.line_out_pins[0];
+ if (nid) {
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
+ alc260_auto_set_output_and_unmute(codec, nid, pin_type, 0);
+ }
nid = spec->autocfg.speaker_pins[0];
if (nid)
@@ -4051,8 +4357,8 @@
nid = spec->autocfg.hp_pins[0];
if (nid)
- alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
-}
+ alc260_auto_set_output_and_unmute(codec, nid, PIN_HP, 0);
+}
#define ALC260_PIN_CD_NID 0x16
static void alc260_auto_init_analog_input(struct hda_codec *codec)
@@ -4063,10 +4369,13 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if (nid >= 0x12) {
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
- i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ?
+ PIN_VREF80 : PIN_IN);
if (nid != ALC260_PIN_CD_NID)
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_MUTE);
}
}
@@ -4086,8 +4395,8 @@
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -4122,14 +4431,17 @@
int err;
static hda_nid_t alc260_ignore[] = { 0x17, 0 };
- if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- alc260_ignore)) < 0)
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc260_ignore);
+ if (err < 0)
return err;
- if ((err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0)
+ err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
return err;
- if (! spec->kctl_alloc)
+ if (!spec->kctl_alloc)
return 0; /* can't find valid BIOS pin config */
- if ((err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
return err;
spec->multiout.max_channels = 2;
@@ -4177,6 +4489,8 @@
[ALC260_HP_3013] = "hp-3013",
[ALC260_FUJITSU_S702X] = "fujitsu",
[ALC260_ACER] = "acer",
+ [ALC260_WILL] = "will",
+ [ALC260_REPLACER_672V] = "replacer",
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = "test",
#endif
@@ -4200,6 +4514,8 @@
SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
+ SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
+ SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
{}
};
@@ -4270,6 +4586,34 @@
.num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
.input_mux = alc260_acer_capture_sources,
},
+ [ALC260_WILL] = {
+ .mixers = { alc260_will_mixer,
+ alc260_capture_mixer },
+ .init_verbs = { alc260_init_verbs, alc260_will_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+ .adc_nids = alc260_adc_nids,
+ .dig_out_nid = ALC260_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ },
+ [ALC260_REPLACER_672V] = {
+ .mixers = { alc260_replacer_672v_mixer,
+ alc260_capture_mixer },
+ .init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
+ .num_dacs = ARRAY_SIZE(alc260_dac_nids),
+ .dac_nids = alc260_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+ .adc_nids = alc260_adc_nids,
+ .dig_out_nid = ALC260_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc260_modes),
+ .channel_mode = alc260_modes,
+ .input_mux = &alc260_capture_source,
+ .unsol_event = alc260_replacer_672v_unsol_event,
+ .init_hook = alc260_replacer_672v_automute,
+ },
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = {
.mixers = { alc260_test_mixer,
@@ -4313,7 +4657,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
@@ -4382,7 +4726,8 @@
#define alc882_mux_enum_info alc_mux_enum_info
#define alc882_mux_enum_get alc_mux_enum_get
-static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
@@ -4396,7 +4741,7 @@
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
- if (*cur_val == idx && ! codec->in_resume)
+ if (*cur_val == idx && !codec->in_resume)
return 0;
for (i = 0; i < imux->num_items; i++) {
unsigned int v = (i == idx) ? 0x7000 : 0x7080;
@@ -4464,6 +4809,21 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc882_w2jc_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc882_chmode_mixer[] = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -4559,7 +4919,7 @@
/* change to EAPD mode */
{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
{0x20, AC_VERB_SET_PROC_COEF, 0x3060},
- { }
+ { }
};
/* Mac Pro test */
@@ -4624,6 +4984,7 @@
{ }
};
+
static void alc882_gpio_mute(struct hda_codec *codec, int pin, int muted)
{
unsigned int gpiostate, gpiomask, gpiodir;
@@ -4672,8 +5033,8 @@
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -4782,6 +5143,7 @@
[ALC882_3ST_DIG] = "3stack-dig",
[ALC882_6ST_DIG] = "6stack-dig",
[ALC882_ARIMA] = "arima",
+ [ALC882_W2JC] = "w2jc",
[ALC885_MACPRO] = "macpro",
[ALC882_AUTO] = "auto",
};
@@ -4792,6 +5154,7 @@
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA),
SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
+ SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC),
{}
};
@@ -4828,6 +5191,18 @@
.channel_mode = alc882_sixstack_modes,
.input_mux = &alc882_capture_source,
},
+ [ALC882_W2JC] = {
+ .mixers = { alc882_w2jc_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_init_verbs, alc882_eapd_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
+ .channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc882_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ },
[ALC885_MACPRO] = {
.mixers = { alc882_macpro_mixer },
.init_verbs = { alc882_macpro_init_verbs },
@@ -4851,15 +5226,17 @@
{
/* set as output */
struct alc_spec *spec = codec->spec;
- int idx;
-
+ int idx;
+
if (spec->multiout.dac_nids[dac_idx] == 0x25)
idx = 4;
else
idx = spec->multiout.dac_nids[dac_idx] - 2;
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, idx);
}
@@ -4869,10 +5246,13 @@
struct alc_spec *spec = codec->spec;
int i;
+ alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
for (i = 0; i <= HDA_SIDE; i++) {
- hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
- alc882_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ alc882_auto_set_output_and_unmute(codec, nid, pin_type,
+ i);
}
}
@@ -4883,7 +5263,8 @@
pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
- alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */
+ /* use dac 0 */
+ alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
}
#define alc882_is_input_pin(nid) alc880_is_input_pin(nid)
@@ -4897,10 +5278,13 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
if (alc882_is_input_pin(nid)) {
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
- i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ?
+ PIN_VREF80 : PIN_IN);
if (nid != ALC882_PIN_CD_NID)
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
AMP_OUT_MUTE);
}
}
@@ -4962,7 +5346,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
@@ -4986,14 +5370,16 @@
spec->stream_digital_playback = &alc882_pcm_digital_playback;
spec->stream_digital_capture = &alc882_pcm_digital_capture;
- if (! spec->adc_nids && spec->input_mux) {
+ if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, 0x07);
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ /* get type */
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc882_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
- spec->mixers[spec->num_mixers] = alc882_capture_alt_mixer;
+ spec->mixers[spec->num_mixers] =
+ alc882_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc882_adc_nids;
@@ -5033,6 +5419,7 @@
/* ADC1-2 */
0x08, 0x09,
};
+
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
@@ -5045,6 +5432,15 @@
{ "CD", 0x4 },
},
};
+
+static struct hda_input_mux alc883_lenovo_101e_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x1 },
+ { "Line", 0x2 },
+ },
+};
+
#define alc883_mux_enum_info alc_mux_enum_info
#define alc883_mux_enum_get alc_mux_enum_get
@@ -5063,7 +5459,7 @@
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
- if (*cur_val == idx && ! codec->in_resume)
+ if (*cur_val == idx && !codec->in_resume)
return 0;
for (i = 0; i < imux->num_items; i++) {
unsigned int v = (i == idx) ? 0x7000 : 0x7080;
@@ -5073,6 +5469,7 @@
*cur_val = idx;
return 1;
}
+
/*
* 2ch mode
*/
@@ -5325,7 +5722,7 @@
.put = alc883_mux_enum_put,
},
{ } /* end */
-};
+};
static struct snd_kcontrol_new alc883_tagra_2ch_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -5350,7 +5747,30 @@
.put = alc883_mux_enum_put,
},
{ } /* end */
-};
+};
+
+static struct snd_kcontrol_new alc883_lenovo_101e_2ch_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("iSpeaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("iSpeaker Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc883_mux_enum_info,
+ .get = alc883_mux_enum_get,
+ .put = alc883_mux_enum_put,
+ },
+ { } /* end */
+};
static struct snd_kcontrol_new alc883_chmode_mixer[] = {
{
@@ -5452,25 +5872,35 @@
{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- {0x01, AC_VERB_SET_GPIO_MASK, 0x03},
- {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
- {0x01, AC_VERB_SET_GPIO_DATA, 0x03},
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x03},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x03},
{ } /* end */
};
+static struct hda_verb alc883_lenovo_101e_verbs[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_FRONT_EVENT|AC_USRSP_EN},
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT|AC_USRSP_EN},
+ { } /* end */
+};
+
/* toggle speaker-output according to the hp-jack state */
static void alc883_tagra_automute(struct hda_codec *codec)
{
unsigned int present;
+ unsigned char bits;
present = snd_hda_codec_read(codec, 0x14, 0,
AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
snd_hda_codec_amp_update(codec, 0x1b, 0, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
+ 0x80, bits);
snd_hda_codec_amp_update(codec, 0x1b, 1, HDA_OUTPUT, 0,
- 0x80, present ? 0x80 : 0);
- snd_hda_codec_write(codec, 1, 0, AC_VERB_SET_GPIO_DATA, present ? 1 : 3);
+ 0x80, bits);
+ snd_hda_codec_write(codec, 1, 0, AC_VERB_SET_GPIO_DATA,
+ present ? 1 : 3);
}
static void alc883_tagra_unsol_event(struct hda_codec *codec, unsigned int res)
@@ -5479,6 +5909,47 @@
alc883_tagra_automute(codec);
}
+static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+}
+
+static void alc883_lenovo_101e_all_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+}
+
+static void alc883_lenovo_101e_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc883_lenovo_101e_all_automute(codec);
+ if ((res >> 26) == ALC880_FRONT_EVENT)
+ alc883_lenovo_101e_ispeaker_automute(codec);
+}
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
@@ -5493,8 +5964,8 @@
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -5530,13 +6001,13 @@
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- //{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ /* {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* Input mixer2 */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- //{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ /* {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
{ }
@@ -5584,6 +6055,7 @@
[ALC883_ACER] = "acer",
[ALC883_MEDION] = "medion",
[ALC883_LAPTOP_EAPD] = "laptop-eapd",
+ [ALC883_LENOVO_101E_2ch] = "lenovo-101e",
[ALC883_AUTO] = "auto",
};
@@ -5592,6 +6064,7 @@
SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch),
SND_PCI_QUIRK(0x1558, 0, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1458, 0xa002, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7280, "MSI", ALC883_6ST_DIG),
@@ -5609,6 +6082,7 @@
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
+ SND_PCI_QUIRK(0x17aa, 0x101e, "lenovo 101e", ALC883_LENOVO_101E_2ch),
{}
};
@@ -5639,7 +6113,7 @@
.channel_mode = alc883_3ST_6ch_modes,
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
- },
+ },
[ALC883_3ST_6ch] = {
.mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer },
.init_verbs = { alc883_init_verbs },
@@ -5651,7 +6125,7 @@
.channel_mode = alc883_3ST_6ch_modes,
.need_dac_fix = 1,
.input_mux = &alc883_capture_source,
- },
+ },
[ALC883_6ST_DIG] = {
.mixers = { alc883_base_mixer, alc883_chmode_mixer },
.init_verbs = { alc883_init_verbs },
@@ -5749,6 +6223,19 @@
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_capture_source,
},
+ [ALC883_LENOVO_101E_2ch] = {
+ .mixers = { alc883_lenovo_101e_2ch_mixer},
+ .init_verbs = { alc883_init_verbs, alc883_lenovo_101e_verbs},
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+ .channel_mode = alc883_3ST_2ch_modes,
+ .input_mux = &alc883_lenovo_101e_capture_source,
+ .unsol_event = alc883_lenovo_101e_unsol_event,
+ .init_hook = alc883_lenovo_101e_all_automute,
+ },
};
@@ -5761,8 +6248,8 @@
{
/* set as output */
struct alc_spec *spec = codec->spec;
- int idx;
-
+ int idx;
+
if (spec->multiout.dac_nids[dac_idx] == 0x25)
idx = 4;
else
@@ -5781,10 +6268,13 @@
struct alc_spec *spec = codec->spec;
int i;
+ alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
for (i = 0; i <= HDA_SIDE; i++) {
- hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
- alc883_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ alc883_auto_set_output_and_unmute(codec, nid, pin_type,
+ i);
}
}
@@ -5833,8 +6323,8 @@
else if (err > 0)
/* hack - override the init verbs */
spec->init_verbs[0] = alc883_auto_init_verbs;
- spec->mixers[spec->num_mixers] = alc883_capture_mixer;
- spec->num_mixers++;
+ spec->mixers[spec->num_mixers] = alc883_capture_mixer;
+ spec->num_mixers++;
return err;
}
@@ -5872,7 +6362,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
@@ -5891,7 +6381,7 @@
spec->stream_digital_playback = &alc883_pcm_digital_playback;
spec->stream_digital_capture = &alc883_pcm_digital_capture;
- if (! spec->adc_nids && spec->input_mux) {
+ if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = alc883_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
}
@@ -6028,8 +6518,8 @@
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -6086,7 +6576,7 @@
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
{ }
};
@@ -6113,7 +6603,7 @@
struct alc_spec *spec = codec->spec;
unsigned int mute;
- if (force || ! spec->sense_updated) {
+ if (force || !spec->sense_updated) {
unsigned int present;
/* need to execute and sync at first */
snd_hda_codec_read(codec, 0x15, 0, AC_VERB_SET_PIN_SENSE, 0);
@@ -6153,7 +6643,7 @@
struct alc_spec *spec = codec->spec;
unsigned int mute;
- if (force || ! spec->sense_updated) {
+ if (force || !spec->sense_updated) {
unsigned int present;
/* need to execute and sync at first */
snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
@@ -6226,7 +6716,7 @@
struct alc_spec *spec = codec->spec;
unsigned int mute;
- if (force || ! spec->sense_updated) {
+ if (force || !spec->sense_updated) {
unsigned int present;
/* need to execute and sync at first */
snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
@@ -6331,7 +6821,8 @@
};
/* add playback controls from the parsed DAC table */
-static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
{
hda_nid_t nid;
int err;
@@ -6342,26 +6833,39 @@
nid = cfg->line_out_pins[0];
if (nid) {
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Front Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Front Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Front Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Front Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
}
nid = cfg->speaker_pins[0];
if (nid) {
if (nid == 0x16) {
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Speaker Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Speaker Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
} else {
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Speaker Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
}
}
@@ -6369,23 +6873,33 @@
if (nid) {
/* spec->multiout.hp_nid = 2; */
if (nid == 0x16) {
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Headphone Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
} else {
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
}
}
- return 0;
+ return 0;
}
/* identical with ALC880 */
-#define alc262_auto_create_analog_input_ctls alc880_auto_create_analog_input_ctls
+#define alc262_auto_create_analog_input_ctls \
+ alc880_auto_create_analog_input_ctls
/*
* generic initialization of ADC, input mixers and output mixers
@@ -6403,8 +6917,8 @@
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -6464,8 +6978,8 @@
/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
* mixer widget
- * Note: PASD motherboards uses the Line In 2 as the input for front panel
- * mic (mic 2)
+ * Note: PASD motherboards uses the Line In 2 as the input for
+ * front panel mic (mic 2)
*/
/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -6647,13 +7161,17 @@
int err;
static hda_nid_t alc262_ignore[] = { 0x1d, 0 };
- if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- alc262_ignore)) < 0)
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc262_ignore);
+ if (err < 0)
return err;
- if (! spec->autocfg.line_outs)
+ if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- if ((err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
@@ -6777,7 +7295,7 @@
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_HP_capture_source,
- },
+ },
[ALC262_HP_BPC_D7000_WF] = {
.mixers = { alc262_HP_BPC_WildWest_mixer },
.init_verbs = { alc262_HP_BPC_WildWest_init_verbs },
@@ -6787,7 +7305,7 @@
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_HP_capture_source,
- },
+ },
[ALC262_HP_BPC_D7000_WL] = {
.mixers = { alc262_HP_BPC_WildWest_mixer,
alc262_HP_BPC_WildWest_option_mixer },
@@ -6798,7 +7316,7 @@
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_HP_capture_source,
- },
+ },
[ALC262_BENQ_ED8] = {
.mixers = { alc262_base_mixer },
.init_verbs = { alc262_init_verbs, alc262_EAPD_verbs },
@@ -6808,7 +7326,7 @@
.num_channel_mode = ARRAY_SIZE(alc262_modes),
.channel_mode = alc262_modes,
.input_mux = &alc262_capture_source,
- },
+ },
};
static int patch_alc262(struct hda_codec *codec)
@@ -6823,7 +7341,9 @@
codec->spec = spec;
#if 0
- /* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is under-run */
+ /* pshou 07/11/05 set a zero PCM sample to DAC when FIFO is
+ * under-run
+ */
{
int tmp;
snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_COEF_INDEX, 7);
@@ -6849,7 +7369,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
@@ -6868,15 +7388,17 @@
spec->stream_digital_playback = &alc262_pcm_digital_playback;
spec->stream_digital_capture = &alc262_pcm_digital_capture;
- if (! spec->adc_nids && spec->input_mux) {
+ if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, 0x07);
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
+ /* get type */
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc262_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
- spec->mixers[spec->num_mixers] = alc262_capture_alt_mixer;
+ spec->mixers[spec->num_mixers] =
+ alc262_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc262_adc_nids;
@@ -6904,7 +7426,9 @@
static struct hda_verb alc861_threestack_ch2_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+ /* set pin widget 18h (mic1/2) for input, for mic also enable
+ * the vref
+ */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
@@ -6961,7 +7485,9 @@
static struct hda_verb alc861_asus_ch2_init[] = {
/* set pin widget 1Ah (line in) for input */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
- /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+ /* set pin widget 18h (mic1/2) for input, for mic also enable
+ * the vref
+ */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
@@ -7016,7 +7542,7 @@
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
-
+
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
@@ -7050,7 +7576,7 @@
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
-
+
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
@@ -7092,7 +7618,7 @@
},
{ } /* end */
-};
+};
static struct snd_kcontrol_new alc861_uniwill_m31_mixer[] = {
/* output mixer control */
@@ -7113,7 +7639,7 @@
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
-
+
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
@@ -7134,7 +7660,7 @@
.private_value = ARRAY_SIZE(alc861_uniwill_m31_modes),
},
{ } /* end */
-};
+};
static struct snd_kcontrol_new alc861_asus_mixer[] = {
/* output mixer control */
@@ -7154,8 +7680,8 @@
HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
- HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT), /* was HDA_INPUT (why?) */
-
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT),
+
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
@@ -7239,7 +7765,7 @@
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -7249,7 +7775,8 @@
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ /* hp used DAC 3 (Front) */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
@@ -7300,7 +7827,7 @@
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -7310,7 +7837,8 @@
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ /* hp used DAC 3 (Front) */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
@@ -7329,7 +7857,8 @@
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-E for HP out (front panel) */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, // this has to be set to VREF80
+ /* this has to be set to VREF80 */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-F for mic-in (front panel) with vref */
@@ -7360,7 +7889,7 @@
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -7370,7 +7899,8 @@
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ /* hp used DAC 3 (Front) */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
@@ -7379,7 +7909,9 @@
/*
* Unmute ADC0 and set the default input to mic-in
*/
- /* port-A for surround (rear panel) | according to codec#0 this is the HP jack*/
+ /* port-A for surround (rear panel)
+ * according to codec#0 this is the HP jack
+ */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
/* route front PCM to HP */
{ 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
@@ -7391,7 +7923,8 @@
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-E for HP out (front panel) */
- { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* this has to be set to VREF80 */
+ /* this has to be set to VREF80 */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-F for mic-in (front panel) with vref */
@@ -7421,7 +7954,7 @@
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, /* Output 0~12 step */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c}, /* Output 0~12 step */
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
@@ -7431,7 +7964,8 @@
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, /* hp used DAC 3 (Front) */
+ /* hp used DAC 3 (Front) */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
@@ -7450,7 +7984,7 @@
/*
* Unmute ADC0 and set the default input to mic-in
*/
-// {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute DAC0~3 & spdif out*/
@@ -7483,21 +8017,21 @@
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
- {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, // set Mic 1
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00}, /* set Mic 1 */
{ }
};
static struct hda_verb alc861_toshiba_init_verbs[] = {
{0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
-
+
{ }
};
@@ -7521,9 +8055,6 @@
static void alc861_toshiba_unsol_event(struct hda_codec *codec,
unsigned int res)
{
- /* Looks like the unsol event is incompatible with the standard
- * definition. 6bit tag is placed at 26 bit!
- */
if ((res >> 26) == ALC880_HP_EVENT)
alc861_toshiba_automute(codec);
}
@@ -7568,7 +8099,8 @@
};
/* fill in the dac_nids table from the parsed pin configuration */
-static int alc861_auto_fill_dac_nids(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+static int alc861_auto_fill_dac_nids(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
{
int i;
hda_nid_t nid;
@@ -7591,29 +8123,40 @@
const struct auto_pin_cfg *cfg)
{
char name[32];
- static const char *chname[4] = { "Front", "Surround", NULL /*CLFE*/, "Side" };
+ static const char *chname[4] = {
+ "Front", "Surround", NULL /*CLFE*/, "Side"
+ };
hda_nid_t nid;
int i, idx, err;
for (i = 0; i < cfg->line_outs; i++) {
nid = spec->multiout.dac_nids[i];
- if (! nid)
+ if (!nid)
continue;
if (nid == 0x05) {
/* Center/LFE */
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
} else {
- for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1; idx++)
+ for (idx = 0; idx < ARRAY_SIZE(alc861_dac_nids) - 1;
+ idx++)
if (nid == alc861_dac_nids[idx])
break;
sprintf(name, "%s Playback Switch", chname[idx]);
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
}
}
@@ -7625,13 +8168,15 @@
int err;
hda_nid_t nid;
- if (! pin)
+ if (!pin)
return 0;
if ((pin >= 0x0b && pin <= 0x10) || pin == 0x1f || pin == 0x20) {
nid = 0x03;
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Headphone Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
spec->multiout.hp_nid = nid;
}
@@ -7639,32 +8184,33 @@
}
/* create playback/capture controls for input pins */
-static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
+static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
{
struct hda_input_mux *imux = &spec->private_imux;
int i, err, idx, idx1;
for (i = 0; i < AUTO_PIN_LAST; i++) {
- switch(cfg->input_pins[i]) {
+ switch (cfg->input_pins[i]) {
case 0x0c:
idx1 = 1;
- idx = 2; // Line In
+ idx = 2; /* Line In */
break;
case 0x0f:
idx1 = 2;
- idx = 2; // Line In
+ idx = 2; /* Line In */
break;
case 0x0d:
idx1 = 0;
- idx = 1; // Mic In
+ idx = 1; /* Mic In */
break;
- case 0x10:
+ case 0x10:
idx1 = 3;
- idx = 1; // Mic In
+ idx = 1; /* Mic In */
break;
case 0x11:
idx1 = 4;
- idx = 0; // CD
+ idx = 0; /* CD */
break;
default:
continue;
@@ -7677,7 +8223,7 @@
imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = idx1;
- imux->num_items++;
+ imux->num_items++;
}
return 0;
}
@@ -7702,13 +8248,16 @@
{ } /* end */
};
-static void alc861_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid,
+static void alc861_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid,
int pin_type, int dac_idx)
{
/* set as output */
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
- snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pin_type);
+ snd_hda_codec_write(codec, dac_idx, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_UNMUTE);
}
@@ -7717,10 +8266,13 @@
struct alc_spec *spec = codec->spec;
int i;
+ alc_subsystem_id(codec, 0x0e, 0x0f, 0x0b);
for (i = 0; i < spec->autocfg.line_outs; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
- alc861_auto_set_output_and_unmute(codec, nid, PIN_OUT, spec->multiout.dac_nids[i]);
+ alc861_auto_set_output_and_unmute(codec, nid, pin_type,
+ spec->multiout.dac_nids[i]);
}
}
@@ -7731,7 +8283,8 @@
pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
- alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, spec->multiout.dac_nids[0]);
+ alc861_auto_set_output_and_unmute(codec, pin, PIN_HP,
+ spec->multiout.dac_nids[0]);
}
static void alc861_auto_init_analog_input(struct hda_codec *codec)
@@ -7741,31 +8294,43 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = spec->autocfg.input_pins[i];
- if ((nid>=0x0c) && (nid <=0x11)) {
- snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
- i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ if (nid >= 0x0c && nid <= 0x11) {
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ?
+ PIN_VREF80 : PIN_IN);
}
}
}
/* parse the BIOS configuration and set up the alc_spec */
-/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
+/* return 1 if successful, 0 if the proper config is not found,
+ * or a negative error code
+ */
static int alc861_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc861_ignore[] = { 0x1d, 0 };
- if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- alc861_ignore)) < 0)
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc861_ignore);
+ if (err < 0)
return err;
- if (! spec->autocfg.line_outs)
+ if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
- (err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0])) < 0 ||
- (err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ err = alc861_auto_fill_dac_nids(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+ if (err < 0)
+ return err;
+ err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
@@ -7817,12 +8382,14 @@
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC861_3ST),
SND_PCI_QUIRK(0x1043, 0x1335, "ASUS F2/3", ALC861_ASUS_LAPTOP),
SND_PCI_QUIRK(0x1043, 0x1338, "ASUS F2/3", ALC861_ASUS_LAPTOP),
+ SND_PCI_QUIRK(0x1043, 0x13d7, "ASUS A9rp", ALC861_ASUS_LAPTOP),
SND_PCI_QUIRK(0x1043, 0x1393, "ASUS", ALC861_ASUS),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660_3ST),
SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba", ALC861_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba", ALC861_TOSHIBA),
SND_PCI_QUIRK(0x1584, 0x9072, "Uniwill m31", ALC861_UNIWILL_M31),
SND_PCI_QUIRK(0x1584, 0x2b01, "Uniwill X40AIx", ALC861_UNIWILL_M31),
+ SND_PCI_QUIRK(0x1849, 0x0660, "Asrock 939SLI32", ALC660_3ST),
SND_PCI_QUIRK(0x8086, 0xd600, "Intel", ALC861_3ST),
{}
};
@@ -7892,7 +8459,8 @@
},
[ALC861_TOSHIBA] = {
.mixers = { alc861_toshiba_mixer },
- .init_verbs = { alc861_base_init_verbs, alc861_toshiba_init_verbs },
+ .init_verbs = { alc861_base_init_verbs,
+ alc861_toshiba_init_verbs },
.num_dacs = ARRAY_SIZE(alc861_dac_nids),
.dac_nids = alc861_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
@@ -7944,7 +8512,7 @@
if (spec == NULL)
return -ENOMEM;
- codec->spec = spec;
+ codec->spec = spec;
board_config = snd_hda_check_board_config(codec, ALC861_MODEL_LAST,
alc861_models,
@@ -7962,7 +8530,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
@@ -8049,7 +8617,7 @@
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
- if (*cur_val == idx && ! codec->in_resume)
+ if (*cur_val == idx && !codec->in_resume)
return 0;
for (i = 0; i < imux->num_items; i++) {
unsigned int v = (i == idx) ? 0x7000 : 0x7080;
@@ -8193,6 +8761,27 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc861vd_lenovo_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ /*HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),*/
+ HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+
+ HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+
+ { } /* end */
+};
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
@@ -8214,10 +8803,10 @@
{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* Capture mixer: unmute Mic, F-Mic, Line, CD inputs */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(6)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(8)},
/*
* Set up output mixers (0x02 - 0x05)
@@ -8318,6 +8907,68 @@
{ }
};
+static struct hda_verb alc861vd_eapd_verbs[] = {
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
+};
+
+static struct hda_verb alc861vd_lenovo_unsol_verbs[] = {
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {}
+};
+
+/* toggle speaker-output according to the hp-jack state */
+static void alc861vd_lenovo_hp_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+}
+
+static void alc861vd_lenovo_mic_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x18, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x0b, 0, HDA_INPUT, 1,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x0b, 1, HDA_INPUT, 1,
+ 0x80, bits);
+}
+
+static void alc861vd_lenovo_automute(struct hda_codec *codec)
+{
+ alc861vd_lenovo_hp_automute(codec);
+ alc861vd_lenovo_mic_automute(codec);
+}
+
+static void alc861vd_lenovo_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case ALC880_HP_EVENT:
+ alc861vd_lenovo_hp_automute(codec);
+ break;
+ case ALC880_MIC_EVENT:
+ alc861vd_lenovo_mic_automute(codec);
+ break;
+ }
+}
+
/* pcm configuration: identiacal with ALC880 */
#define alc861vd_pcm_analog_playback alc880_pcm_analog_playback
#define alc861vd_pcm_analog_capture alc880_pcm_analog_capture
@@ -8332,15 +8983,18 @@
[ALC861VD_3ST] = "3stack",
[ALC861VD_3ST_DIG] = "3stack-digout",
[ALC861VD_6ST_DIG] = "6stack-digout",
+ [ALC861VD_LENOVO] = "lenovo",
[ALC861VD_AUTO] = "auto",
};
static struct snd_pci_quirk alc861vd_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),
SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
SND_PCI_QUIRK(0x1019, 0xa88d, "Realtek ALC660 demo", ALC660VD_3ST),
- SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo 3000 C200", ALC861VD_3ST),
+ SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo 3000 C200", ALC861VD_LENOVO),
+ SND_PCI_QUIRK(0x17aa, 0x2066, "Lenovo", ALC861VD_LENOVO),
{}
};
@@ -8389,6 +9043,22 @@
.channel_mode = alc861vd_6stack_modes,
.input_mux = &alc861vd_capture_source,
},
+ [ALC861VD_LENOVO] = {
+ .mixers = { alc861vd_lenovo_mixer },
+ .init_verbs = { alc861vd_volume_init_verbs,
+ alc861vd_3stack_init_verbs,
+ alc861vd_eapd_verbs,
+ alc861vd_lenovo_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
+ .dac_nids = alc660vd_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids),
+ .adc_nids = alc861vd_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
+ .channel_mode = alc861vd_3stack_2ch_modes,
+ .input_mux = &alc861vd_capture_source,
+ .unsol_event = alc861vd_lenovo_unsol_event,
+ .init_hook = alc861vd_lenovo_automute,
+ },
};
/*
@@ -8409,11 +9079,13 @@
struct alc_spec *spec = codec->spec;
int i;
+ alc_subsystem_id(codec, 0x15, 0x1b, 0x14);
for (i = 0; i <= HDA_SIDE; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
alc861vd_auto_set_output_and_unmute(codec, nid,
- PIN_OUT, i);
+ pin_type, i);
}
}
@@ -8466,7 +9138,7 @@
int i, err;
for (i = 0; i < cfg->line_outs; i++) {
- if (! spec->multiout.dac_nids[i])
+ if (!spec->multiout.dac_nids[i])
continue;
nid_v = alc861vd_idx_to_mixer_vol(
alc880_dac_to_idx(
@@ -8477,36 +9149,42 @@
if (i == 2) {
/* Center/LFE */
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Center Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid_v, 1,
- 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Center Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid_v, 1, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "LFE Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid_v, 2,
- 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "LFE Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid_v, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE,
- "Center Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid_s, 1,
- 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid_s, 1, 2,
+ HDA_INPUT));
+ if (err < 0)
return err;
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE,
- "LFE Playback Switch",
- HDA_COMPOSE_AMP_VAL(nid_s, 2,
- 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid_s, 2, 2,
+ HDA_INPUT));
+ if (err < 0)
return err;
} else {
sprintf(name, "%s Playback Volume", chname[i]);
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(nid_v, 3,
- 0, HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid_v, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
return err;
sprintf(name, "%s Playback Switch", chname[i]);
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid_v, 3,
- 2, HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid_s, 3, 2,
+ HDA_INPUT));
+ if (err < 0)
return err;
}
}
@@ -8523,13 +9201,13 @@
int err;
char name[32];
- if (! pin)
+ if (!pin)
return 0;
if (alc880_is_fixed_pin(pin)) {
nid_v = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
/* specify the DAC as the extra output */
- if (! spec->multiout.hp_nid)
+ if (!spec->multiout.hp_nid)
spec->multiout.hp_nid = nid_v;
else
spec->multiout.extra_out_nid[0] = nid_v;
@@ -8540,22 +9218,22 @@
alc880_fixed_pin_idx(pin));
sprintf(name, "%s Playback Volume", pfx);
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(nid_v, 3, 0,
- HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid_v, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
sprintf(name, "%s Playback Switch", pfx);
- if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid_s, 3, 2,
- HDA_INPUT))) < 0)
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid_s, 3, 2, HDA_INPUT));
+ if (err < 0)
return err;
} else if (alc880_is_multi_pin(pin)) {
/* set manual connection */
/* we have only a switch on HP-out PIN */
sprintf(name, "%s Playback Switch", pfx);
- if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(pin, 3, 0,
- HDA_OUTPUT))) < 0)
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+ if (err < 0)
return err;
}
return 0;
@@ -8572,21 +9250,31 @@
int err;
static hda_nid_t alc861vd_ignore[] = { 0x1d, 0 };
- if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
- alc861vd_ignore)) < 0)
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc861vd_ignore);
+ if (err < 0)
return err;
- if (! spec->autocfg.line_outs)
+ if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
- (err = alc861vd_auto_create_multi_out_ctls(spec,
- &spec->autocfg)) < 0 ||
- (err = alc861vd_auto_create_extra_out(spec,
- spec->autocfg.speaker_pins[0], "Speaker")) < 0 ||
- (err = alc861vd_auto_create_extra_out(spec,
- spec->autocfg.hp_pins[0], "Headphone")) < 0 ||
- (err = alc880_auto_create_analog_input_ctls(spec,
- &spec->autocfg)) < 0)
+ err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc861vd_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc861vd_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
+ "Speaker");
+ if (err < 0)
+ return err;
+ err = alc861vd_auto_create_extra_out(spec,
+ spec->autocfg.hp_pins[0],
+ "Headphone");
+ if (err < 0)
+ return err;
+ err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
return err;
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
@@ -8641,7 +9329,7 @@
if (err < 0) {
alc_free(codec);
return err;
- } else if (! err) {
+ } else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
@@ -8675,16 +9363,875 @@
}
/*
+ * ALC662 support
+ *
+ * ALC662 is almost identical with ALC880 but has cleaner and more flexible
+ * configuration. Each pin widget can choose any input DACs and a mixer.
+ * Each ADC is connected from a mixer of all inputs. This makes possible
+ * 6-channel independent captures.
+ *
+ * In addition, an independent DAC for the multi-playback (not used in this
+ * driver yet).
+ */
+#define ALC662_DIGOUT_NID 0x06
+#define ALC662_DIGIN_NID 0x0a
+
+static hda_nid_t alc662_dac_nids[4] = {
+ /* front, rear, clfe, rear_surr */
+ 0x02, 0x03, 0x04
+};
+
+static hda_nid_t alc662_adc_nids[1] = {
+ /* ADC1-2 */
+ 0x09,
+};
+/* input MUX */
+/* FIXME: should be a matrix-type input source selection */
+
+static struct hda_input_mux alc662_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+static struct hda_input_mux alc662_lenovo_101e_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x1 },
+ { "Line", 0x2 },
+ },
+};
+#define alc662_mux_enum_info alc_mux_enum_info
+#define alc662_mux_enum_get alc_mux_enum_get
+
+static int alc662_mux_enum_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 };
+ hda_nid_t nid = capture_mixers[adc_idx];
+ unsigned int *cur_val = &spec->cur_mux[adc_idx];
+ unsigned int i, idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ if (*cur_val == idx && !codec->in_resume)
+ return 0;
+ for (i = 0; i < imux->num_items; i++) {
+ unsigned int v = (i == idx) ? 0x7000 : 0x7080;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ v | (imux->items[i].index << 8));
+ }
+ *cur_val = idx;
+ return 1;
+}
+/*
+ * 2ch mode
+ */
+static struct hda_channel_mode alc662_3ST_2ch_modes[1] = {
+ { 2, NULL }
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc662_3ST_ch2_init[] = {
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc662_3ST_ch6_init[] = {
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 },
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+ { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc662_3ST_6ch_modes[2] = {
+ { 2, alc662_3ST_ch2_init },
+ { 6, alc662_3ST_ch6_init },
+};
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc662_sixstack_ch6_init[] = {
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc662_sixstack_ch8_init[] = {
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc662_5stack_modes[2] = {
+ { 2, alc662_sixstack_ch6_init },
+ { 6, alc662_sixstack_ch8_init },
+};
+
+/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
+ * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
+ */
+
+static struct snd_kcontrol_new alc662_base_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x02, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x3, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x04, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x04, 2, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+
+ /*Input mixer control */
+ HDA_CODEC_VOLUME("CD Playback Volume", 0xb, 0x4, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0xb, 0x4, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0xb, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0xb, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0xb, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0xb, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0xb, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0xb, 0x01, HDA_INPUT),
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc662_3ST_2ch_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x02, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc662_mux_enum_info,
+ .get = alc662_mux_enum_get,
+ .put = alc662_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc662_3ST_6ch_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x02, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x04, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x04, 2, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc662_mux_enum_info,
+ .get = alc662_mux_enum_get,
+ .put = alc662_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x02, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("iSpeaker Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("iSpeaker Playback Switch", 0x03, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc662_mux_enum_info,
+ .get = alc662_mux_enum_get,
+ .put = alc662_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc662_chmode_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ },
+ { } /* end */
+};
+
+static struct hda_verb alc662_init_verbs[] = {
+ /* ADC: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Rear Pin: output 1 (0x0d) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Mic (rear) pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line-2 In: Headphone output (output 0 - 0x0c) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+ { }
+};
+
+static struct hda_verb alc662_sue_init_verbs[] = {
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_FRONT_EVENT},
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_HP_EVENT},
+ {}
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc662_auto_init_verbs[] = {
+ /*
+ * Unmute ADC and set the default input to mic-in
+ */
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front
+ * panel mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0f)
+ */
+ /* set vol=0 to output mixers */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ /*{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},*/
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ { }
+};
+
+/* capture mixer elements */
+static struct snd_kcontrol_new alc662_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc882_mux_enum_info,
+ .get = alc882_mux_enum_get,
+ .put = alc882_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+}
+
+static void alc662_lenovo_101e_all_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ present = snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? 0x80 : 0;
+ snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
+ 0x80, bits);
+ snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
+ 0x80, bits);
+}
+
+static void alc662_lenovo_101e_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc662_lenovo_101e_all_automute(codec);
+ if ((res >> 26) == ALC880_FRONT_EVENT)
+ alc662_lenovo_101e_ispeaker_automute(codec);
+}
+
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc662_pcm_analog_playback alc880_pcm_analog_playback
+#define alc662_pcm_analog_capture alc880_pcm_analog_capture
+#define alc662_pcm_digital_playback alc880_pcm_digital_playback
+#define alc662_pcm_digital_capture alc880_pcm_digital_capture
+
+/*
+ * configuration and preset
+ */
+static const char *alc662_models[ALC662_MODEL_LAST] = {
+ [ALC662_3ST_2ch_DIG] = "3stack-dig",
+ [ALC662_3ST_6ch_DIG] = "3stack-6ch-dig",
+ [ALC662_3ST_6ch] = "3stack-6ch",
+ [ALC662_5ST_DIG] = "6stack-dig",
+ [ALC662_LENOVO_101E] = "lenovo-101e",
+ [ALC662_AUTO] = "auto",
+};
+
+static struct snd_pci_quirk alc662_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
+ {}
+};
+
+static struct alc_config_preset alc662_presets[] = {
+ [ALC662_3ST_2ch_DIG] = {
+ .mixers = { alc662_3ST_2ch_mixer },
+ .init_verbs = { alc662_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc662_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .dig_out_nid = ALC662_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .adc_nids = alc662_adc_nids,
+ .dig_in_nid = ALC662_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc662_capture_source,
+ },
+ [ALC662_3ST_6ch_DIG] = {
+ .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer },
+ .init_verbs = { alc662_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc662_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .dig_out_nid = ALC662_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .adc_nids = alc662_adc_nids,
+ .dig_in_nid = ALC662_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
+ .channel_mode = alc662_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc662_capture_source,
+ },
+ [ALC662_3ST_6ch] = {
+ .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer },
+ .init_verbs = { alc662_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc662_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .adc_nids = alc662_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes),
+ .channel_mode = alc662_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .input_mux = &alc662_capture_source,
+ },
+ [ALC662_5ST_DIG] = {
+ .mixers = { alc662_base_mixer, alc662_chmode_mixer },
+ .init_verbs = { alc662_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc662_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .dig_out_nid = ALC662_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .adc_nids = alc662_adc_nids,
+ .dig_in_nid = ALC662_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc662_5stack_modes),
+ .channel_mode = alc662_5stack_modes,
+ .input_mux = &alc662_capture_source,
+ },
+ [ALC662_LENOVO_101E] = {
+ .mixers = { alc662_lenovo_101e_mixer },
+ .init_verbs = { alc662_init_verbs, alc662_sue_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc662_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .adc_nids = alc662_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc662_lenovo_101e_capture_source,
+ .unsol_event = alc662_lenovo_101e_unsol_event,
+ .init_hook = alc662_lenovo_101e_all_automute,
+ },
+
+};
+
+
+/*
+ * BIOS auto configuration
+ */
+
+/* add playback controls from the parsed DAC table */
+static int alc662_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ char name[32];
+ static const char *chname[4] = {
+ "Front", "Surround", NULL /*CLFE*/, "Side"
+ };
+ hda_nid_t nid;
+ int i, err;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (!spec->multiout.dac_nids[i])
+ continue;
+ nid = alc880_idx_to_dac(i);
+ if (i == 2) {
+ /* Center/LFE */
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Center Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0,
+ HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "LFE Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0,
+ HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 2,
+ HDA_INPUT));
+ if (err < 0)
+ return err;
+ err = add_control(spec, ALC_CTL_BIND_MUTE,
+ "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 2,
+ HDA_INPUT));
+ if (err < 0)
+ return err;
+ } else {
+ sprintf(name, "%s Playback Volume", chname[i]);
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ sprintf(name, "%s Playback Switch", chname[i]);
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2,
+ HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ }
+ return 0;
+}
+
+/* add playback controls for speaker and HP outputs */
+static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
+ const char *pfx)
+{
+ hda_nid_t nid;
+ int err;
+ char name[32];
+
+ if (!pin)
+ return 0;
+
+ if (alc880_is_fixed_pin(pin)) {
+ nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
+ /* printk("DAC nid=%x\n",nid); */
+ /* specify the DAC as the extra output */
+ if (!spec->multiout.hp_nid)
+ spec->multiout.hp_nid = nid;
+ else
+ spec->multiout.extra_out_nid[0] = nid;
+ /* control HP volume/switch on the output mixer amp */
+ nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
+ sprintf(name, "%s Playback Volume", pfx);
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ sprintf(name, "%s Playback Switch", pfx);
+ err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT));
+ if (err < 0)
+ return err;
+ } else if (alc880_is_multi_pin(pin)) {
+ /* set manual connection */
+ /* we have only a switch on HP-out PIN */
+ sprintf(name, "%s Playback Switch", pfx);
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int alc662_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ struct hda_input_mux *imux = &spec->private_imux;
+ int i, err, idx;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (alc880_is_input_pin(cfg->input_pins[i])) {
+ idx = alc880_input_pin_idx(cfg->input_pins[i]);
+ err = new_analog_input(spec, cfg->input_pins[i],
+ auto_pin_cfg_labels[i],
+ idx, 0x0b);
+ if (err < 0)
+ return err;
+ imux->items[imux->num_items].label =
+ auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].index =
+ alc880_input_pin_idx(cfg->input_pins[i]);
+ imux->num_items++;
+ }
+ }
+ return 0;
+}
+
+static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
+ hda_nid_t nid, int pin_type,
+ int dac_idx)
+{
+ /* set as output */
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ /* need the manual connection? */
+ if (alc880_is_multi_pin(nid)) {
+ struct alc_spec *spec = codec->spec;
+ int idx = alc880_multi_pin_idx(nid);
+ snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
+ AC_VERB_SET_CONNECT_SEL,
+ alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
+ }
+}
+
+static void alc662_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i <= HDA_SIDE; i++) {
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
+ if (nid)
+ alc662_auto_set_output_and_unmute(codec, nid, pin_type,
+ i);
+ }
+}
+
+static void alc662_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pins[0];
+ if (pin) /* connect to front */
+ /* use dac 0 */
+ alc662_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+}
+
+#define alc662_is_input_pin(nid) alc880_is_input_pin(nid)
+#define ALC662_PIN_CD_NID ALC880_PIN_CD_NID
+
+static void alc662_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if (alc662_is_input_pin(nid)) {
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ (i <= AUTO_PIN_FRONT_MIC ?
+ PIN_VREF80 : PIN_IN));
+ if (nid != ALC662_PIN_CD_NID)
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+ }
+}
+
+static int alc662_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+ static hda_nid_t alc662_ignore[] = { 0x1d, 0 };
+
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc662_ignore);
+ if (err < 0)
+ return err;
+ if (!spec->autocfg.line_outs)
+ return 0; /* can't find valid BIOS pin config */
+
+ err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc662_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc662_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
+ "Speaker");
+ if (err < 0)
+ return err;
+ err = alc662_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+ "Headphone");
+ if (err < 0)
+ return err;
+ err = alc662_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
+
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->num_mux_defs = 1;
+ spec->input_mux = &spec->private_imux;
+
+ if (err < 0)
+ return err;
+ else if (err > 0)
+ /* hack - override the init verbs */
+ spec->init_verbs[0] = alc662_auto_init_verbs;
+ spec->mixers[spec->num_mixers] = alc662_capture_mixer;
+ spec->num_mixers++;
+ return err;
+}
+
+/* additional initialization for auto-configuration model */
+static void alc662_auto_init(struct hda_codec *codec)
+{
+ alc662_auto_init_multi_out(codec);
+ alc662_auto_init_hp_out(codec);
+ alc662_auto_init_analog_input(codec);
+}
+
+static int patch_alc662(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int err, board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, ALC662_MODEL_LAST,
+ alc662_models,
+ alc662_cfg_tbl);
+ if (board_config < 0) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC662, "
+ "trying auto-probe from BIOS...\n");
+ board_config = ALC662_AUTO;
+ }
+
+ if (board_config == ALC662_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc662_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (err) {
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
+ board_config = ALC662_3ST_2ch_DIG;
+ }
+ }
+
+ if (board_config != ALC662_AUTO)
+ setup_preset(spec, &alc662_presets[board_config]);
+
+ spec->stream_name_analog = "ALC662 Analog";
+ spec->stream_analog_playback = &alc662_pcm_analog_playback;
+ spec->stream_analog_capture = &alc662_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC662 Digital";
+ spec->stream_digital_playback = &alc662_pcm_digital_playback;
+ spec->stream_digital_capture = &alc662_pcm_digital_capture;
+
+ if (!spec->adc_nids && spec->input_mux) {
+ spec->adc_nids = alc662_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
+ }
+
+ codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC662_AUTO)
+ spec->init_hook = alc662_auto_init;
+
+ return 0;
+}
+
+/*
* patch entries
*/
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
- .patch = patch_alc861 },
+ .patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
{ .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
{ .id = 0x10ec0862, .name = "ALC861-VD", .patch = patch_alc861vd },
+ { .id = 0x10ec0662, .rev = 0x100002, .name = "ALC662 rev2",
+ .patch = patch_alc883 },
+ { .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1",
+ .patch = patch_alc662 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
{ .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index c94291b..93ae9c2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -62,6 +62,7 @@
STAC_MACBOOK,
STAC_MACBOOK_PRO_V1,
STAC_MACBOOK_PRO_V2,
+ STAC_IMAC_INTEL,
STAC_922X_MODELS
};
@@ -175,8 +176,8 @@
0x19, 0x1a
};
-static hda_nid_t stac9205_dmic_nids[3] = {
- 0x17, 0x18, 0
+static hda_nid_t stac9205_dmic_nids[2] = {
+ 0x17, 0x18,
};
static hda_nid_t stac9200_pin_nids[8] = {
@@ -524,12 +525,6 @@
0x02a19320, 0x40000100,
};
-static unsigned int macbook_pin_configs[10] = {
- 0x0321e230, 0x03a1e020, 0x400000fd, 0x9017e110,
- 0x400000fe, 0x0381e021, 0x1345e240, 0x13c5e22e,
- 0x400000fc, 0x400000fb,
-};
-
static unsigned int macbook_pro_v1_pin_configs[10] = {
0x0321e230, 0x03a1e020, 0x9017e110, 0x01014010,
0x01a19021, 0x0381e021, 0x1345e240, 0x13c5e22e,
@@ -542,14 +537,21 @@
0x400000fc, 0x400000fb,
};
+static unsigned int imac_intel_pin_configs[10] = {
+ 0x0121e230, 0x90a70120, 0x9017e110, 0x400000fe,
+ 0x400000fd, 0x0181e021, 0x1145e040, 0x400000fa,
+ 0x400000fc, 0x400000fb,
+};
+
static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = {
[STAC_D945_REF] = ref922x_pin_configs,
[STAC_D945GTP3] = d945gtp3_pin_configs,
[STAC_D945GTP5] = d945gtp5_pin_configs,
- [STAC_MACMINI] = d945gtp5_pin_configs,
- [STAC_MACBOOK] = macbook_pin_configs,
+ [STAC_MACMINI] = macbook_pro_v1_pin_configs,
+ [STAC_MACBOOK] = macbook_pro_v1_pin_configs,
[STAC_MACBOOK_PRO_V1] = macbook_pro_v1_pin_configs,
[STAC_MACBOOK_PRO_V2] = macbook_pro_v2_pin_configs,
+ [STAC_IMAC_INTEL] = imac_intel_pin_configs,
};
static const char *stac922x_models[STAC_922X_MODELS] = {
@@ -560,6 +562,7 @@
[STAC_MACBOOK] = "macbook",
[STAC_MACBOOK_PRO_V1] = "macbook-pro-v1",
[STAC_MACBOOK_PRO_V2] = "macbook-pro",
+ [STAC_IMAC_INTEL] = "imac-intel",
};
static struct snd_pci_quirk stac922x_cfg_tbl[] = {
@@ -820,6 +823,17 @@
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
+static int stac92xx_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+ stream_tag, format, substream);
+}
+
/*
* Analog capture callbacks
@@ -854,7 +868,8 @@
/* NID is set in stac92xx_build_pcms */
.ops = {
.open = stac92xx_dig_playback_pcm_open,
- .close = stac92xx_dig_playback_pcm_close
+ .close = stac92xx_dig_playback_pcm_close,
+ .prepare = stac92xx_dig_playback_pcm_prepare
},
};
@@ -1055,11 +1070,23 @@
static int stac92xx_add_dyn_out_pins(struct hda_codec *codec, struct auto_pin_cfg *cfg)
{
struct sigmatel_spec *spec = codec->spec;
+ unsigned int wcaps, wtype;
+ int i, num_dacs = 0;
+
+ /* use the wcaps cache to count all DACs available for line-outs */
+ for (i = 0; i < codec->num_nodes; i++) {
+ wcaps = codec->wcaps[i];
+ wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ if (wtype == AC_WID_AUD_OUT && !(wcaps & AC_WCAP_DIGITAL))
+ num_dacs++;
+ }
+ snd_printdd("%s: total dac count=%d\n", __func__, num_dacs);
+
switch (cfg->line_outs) {
case 3:
/* add line-in as side */
- if (cfg->input_pins[AUTO_PIN_LINE]) {
+ if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 3) {
cfg->line_out_pins[3] = cfg->input_pins[AUTO_PIN_LINE];
spec->line_switch = 1;
cfg->line_outs++;
@@ -1067,12 +1094,12 @@
break;
case 2:
/* add line-in as clfe and mic as side */
- if (cfg->input_pins[AUTO_PIN_LINE]) {
+ if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 2) {
cfg->line_out_pins[2] = cfg->input_pins[AUTO_PIN_LINE];
spec->line_switch = 1;
cfg->line_outs++;
}
- if (cfg->input_pins[AUTO_PIN_MIC]) {
+ if (cfg->input_pins[AUTO_PIN_MIC] && num_dacs > 3) {
cfg->line_out_pins[3] = cfg->input_pins[AUTO_PIN_MIC];
spec->mic_switch = 1;
cfg->line_outs++;
@@ -1080,12 +1107,12 @@
break;
case 1:
/* add line-in as surr and mic as clfe */
- if (cfg->input_pins[AUTO_PIN_LINE]) {
+ if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 1) {
cfg->line_out_pins[1] = cfg->input_pins[AUTO_PIN_LINE];
spec->line_switch = 1;
cfg->line_outs++;
}
- if (cfg->input_pins[AUTO_PIN_MIC]) {
+ if (cfg->input_pins[AUTO_PIN_MIC] && num_dacs > 2) {
cfg->line_out_pins[2] = cfg->input_pins[AUTO_PIN_MIC];
spec->mic_switch = 1;
cfg->line_outs++;
@@ -1096,33 +1123,76 @@
return 0;
}
+
+static int is_in_dac_nids(struct sigmatel_spec *spec, hda_nid_t nid)
+{
+ int i;
+
+ for (i = 0; i < spec->multiout.num_dacs; i++) {
+ if (spec->multiout.dac_nids[i] == nid)
+ return 1;
+ }
+
+ return 0;
+}
+
/*
- * XXX The line_out pin widget connection list may not be set to the
- * desired DAC nid. This is the case on 927x where ports A and B can
- * be routed to several DACs.
- *
- * This requires an analysis of the line-out/hp pin configuration
- * to provide a best fit for pin/DAC configurations that are routable.
- * For now, 927x DAC4 is not supported and 927x DAC1 output to ports
- * A and B is not supported.
+ * Fill in the dac_nids table from the parsed pin configuration
+ * This function only works when every pin in line_out_pins[]
+ * contains atleast one DAC in its connection list. Some 92xx
+ * codecs are not connected directly to a DAC, such as the 9200
+ * and 9202/925x. For those, dac_nids[] must be hard-coded.
*/
-/* fill in the dac_nids table from the parsed pin configuration */
static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid;
- int i;
-
- /* check the pins hardwired to audio widget */
+ int i, j, conn_len = 0;
+ hda_nid_t nid, conn[HDA_MAX_CONNECTIONS];
+ unsigned int wcaps, wtype;
+
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
- spec->multiout.dac_nids[i] = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
+ conn_len = snd_hda_get_connections(codec, nid, conn,
+ HDA_MAX_CONNECTIONS);
+ for (j = 0; j < conn_len; j++) {
+ wcaps = snd_hda_param_read(codec, conn[j],
+ AC_PAR_AUDIO_WIDGET_CAP);
+ wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+
+ if (wtype != AC_WID_AUD_OUT ||
+ (wcaps & AC_WCAP_DIGITAL))
+ continue;
+ /* conn[j] is a DAC routed to this line-out */
+ if (!is_in_dac_nids(spec, conn[j]))
+ break;
+ }
+
+ if (j == conn_len) {
+ /* error out, no available DAC found */
+ snd_printk(KERN_ERR
+ "%s: No available DAC for pin 0x%x\n",
+ __func__, nid);
+ return -ENODEV;
+ }
+
+ spec->multiout.dac_nids[i] = conn[j];
+ spec->multiout.num_dacs++;
+ if (conn_len > 1) {
+ /* select this DAC in the pin's input mux */
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_CONNECT_SEL, j);
+
+ }
}
- spec->multiout.num_dacs = cfg->line_outs;
-
+ snd_printd("dac_nids=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
+ spec->multiout.num_dacs,
+ spec->multiout.dac_nids[0],
+ spec->multiout.dac_nids[1],
+ spec->multiout.dac_nids[2],
+ spec->multiout.dac_nids[3],
+ spec->multiout.dac_nids[4]);
return 0;
}
@@ -1189,12 +1259,8 @@
static int check_in_dac_nids(struct sigmatel_spec *spec, hda_nid_t nid)
{
- int i;
-
- for (i = 0; i < spec->multiout.num_dacs; i++) {
- if (spec->multiout.dac_nids[i] == nid)
- return 1;
- }
+ if (is_in_dac_nids(spec, nid))
+ return 1;
if (spec->multiout.hp_nid == nid)
return 1;
return 0;
@@ -1236,12 +1302,10 @@
add_spec_dacs(spec, nid);
}
for (i = 0; i < cfg->speaker_outs; i++) {
- nid = snd_hda_codec_read(codec, cfg->speaker_pins[0], 0,
+ nid = snd_hda_codec_read(codec, cfg->speaker_pins[i], 0,
AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
if (check_in_dac_nids(spec, nid))
nid = 0;
- if (check_in_dac_nids(spec, nid))
- nid = 0;
if (! nid)
continue;
add_spec_dacs(spec, nid);
@@ -1355,7 +1419,7 @@
imux->num_items++;
}
- if (imux->num_items == 1) {
+ if (imux->num_items) {
/*
* Set the current input for the muxes.
* The STAC9221 has two input muxes with identical source
@@ -1675,8 +1739,12 @@
{
unsigned int pin_ctl = snd_hda_codec_read(codec, nid,
0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00);
- if (flag == AC_PINCTL_OUT_EN && (pin_ctl & AC_PINCTL_IN_EN))
- return;
+
+ /* if setting pin direction bits, clear the current
+ direction bits first */
+ if (flag & (AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN))
+ pin_ctl &= ~(AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL,
pin_ctl | flag);
@@ -1751,6 +1819,7 @@
stac92xx_init(codec);
stac92xx_set_config_regs(codec);
+ snd_hda_resume_ctls(codec, spec->mixer);
for (i = 0; i < spec->num_mixers; i++)
snd_hda_resume_ctls(codec, spec->mixers[i]);
if (spec->multiout.dig_out_nid)
@@ -1905,12 +1974,18 @@
*/
printk(KERN_INFO "hda_codec: STAC922x, Apple subsys_id=%x\n", codec->subsystem_id);
switch (codec->subsystem_id) {
+ case 0x106b0a00: /* MacBook First generatoin */
+ spec->board_config = STAC_MACBOOK;
+ break;
case 0x106b0200: /* MacBook Pro first generation */
spec->board_config = STAC_MACBOOK_PRO_V1;
break;
case 0x106b1e00: /* MacBook Pro second generation */
spec->board_config = STAC_MACBOOK_PRO_V2;
break;
+ case 0x106b0700: /* Intel-based iMac */
+ spec->board_config = STAC_IMAC_INTEL;
+ break;
}
}
@@ -1931,7 +2006,7 @@
spec->adc_nids = stac922x_adc_nids;
spec->mux_nids = stac922x_mux_nids;
- spec->num_muxes = 2;
+ spec->num_muxes = ARRAY_SIZE(stac922x_mux_nids);
spec->num_dmics = 0;
spec->init = stac922x_core_init;
@@ -1992,7 +2067,7 @@
case STAC_D965_3ST:
spec->adc_nids = stac927x_adc_nids;
spec->mux_nids = stac927x_mux_nids;
- spec->num_muxes = 3;
+ spec->num_muxes = ARRAY_SIZE(stac927x_mux_nids);
spec->num_dmics = 0;
spec->init = d965_core_init;
spec->mixer = stac9227_mixer;
@@ -2000,7 +2075,7 @@
case STAC_D965_5ST:
spec->adc_nids = stac927x_adc_nids;
spec->mux_nids = stac927x_mux_nids;
- spec->num_muxes = 3;
+ spec->num_muxes = ARRAY_SIZE(stac927x_mux_nids);
spec->num_dmics = 0;
spec->init = d965_core_init;
spec->mixer = stac9227_mixer;
@@ -2008,7 +2083,7 @@
default:
spec->adc_nids = stac927x_adc_nids;
spec->mux_nids = stac927x_mux_nids;
- spec->num_muxes = 3;
+ spec->num_muxes = ARRAY_SIZE(stac927x_mux_nids);
spec->num_dmics = 0;
spec->init = stac927x_core_init;
spec->mixer = stac927x_mixer;
@@ -2067,9 +2142,9 @@
spec->adc_nids = stac9205_adc_nids;
spec->mux_nids = stac9205_mux_nids;
- spec->num_muxes = 2;
+ spec->num_muxes = ARRAY_SIZE(stac9205_mux_nids);
spec->dmic_nids = stac9205_dmic_nids;
- spec->num_dmics = 2;
+ spec->num_dmics = ARRAY_SIZE(stac9205_dmic_nids);
spec->dmux_nid = 0x1d;
spec->init = stac9205_core_init;
@@ -2294,6 +2369,7 @@
SND_PCI_QUIRK(0x104d, 0x81e6, "Sony VAIO F/S", CXD9872RD_VAIO),
SND_PCI_QUIRK(0x104d, 0x81ef, "Sony VAIO F/S", CXD9872RD_VAIO),
SND_PCI_QUIRK(0x104d, 0x81fd, "Sony VAIO AR", CXD9872AKD_VAIO),
+ SND_PCI_QUIRK(0x104d, 0x8205, "Sony VAIO AR", CXD9872AKD_VAIO),
{}
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 2b11ac8..ba32d1e 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -377,6 +377,17 @@
return snd_hda_multi_out_dig_close(codec, &spec->multiout);
}
+static int via_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct via_spec *spec = codec->spec;
+ return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
+ stream_tag, format, substream);
+}
+
/*
* Analog capture
*/
@@ -433,7 +444,8 @@
/* NID is set in via_build_pcms */
.ops = {
.open = via_dig_playback_pcm_open,
- .close = via_dig_playback_pcm_close
+ .close = via_dig_playback_pcm_close,
+ .prepare = via_dig_playback_pcm_prepare
},
};
diff --git a/sound/pci/ice1712/amp.c b/sound/pci/ice1712/amp.c
index 6e22d32..44bbb63 100644
--- a/sound/pci/ice1712/amp.c
+++ b/sound/pci/ice1712/amp.c
@@ -75,7 +75,7 @@
/* entry point */
-const struct snd_ice1712_card_info snd_vt1724_amp_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_amp_cards[] __devinitdata = {
{
.subvendor = VT1724_SUBDEVICE_AV710,
.name = "Chaintech AV-710",
diff --git a/sound/pci/ice1712/amp.h b/sound/pci/ice1712/amp.h
index 7b667ba..a0fc89b 100644
--- a/sound/pci/ice1712/amp.h
+++ b/sound/pci/ice1712/amp.h
@@ -42,7 +42,7 @@
#define WM_DAC_CTRL 0x02
#define WM_INT_CTRL 0x03
-extern const struct snd_ice1712_card_info snd_vt1724_amp_cards[];
+extern struct snd_ice1712_card_info snd_vt1724_amp_cards[];
#endif /* __SOUND_AMP_H */
diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c
index 6941d85..66bacde 100644
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -1411,7 +1411,7 @@
* mixers
*/
-static const struct snd_kcontrol_new aureon_dac_controls[] __devinitdata = {
+static struct snd_kcontrol_new aureon_dac_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
@@ -1526,7 +1526,7 @@
}
};
-static const struct snd_kcontrol_new wm_controls[] __devinitdata = {
+static struct snd_kcontrol_new wm_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "PCM Playback Switch",
@@ -1592,7 +1592,7 @@
}
};
-static const struct snd_kcontrol_new ac97_controls[] __devinitdata = {
+static struct snd_kcontrol_new ac97_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "AC97 Playback Switch",
@@ -1697,7 +1697,7 @@
}
};
-static const struct snd_kcontrol_new universe_ac97_controls[] __devinitdata = {
+static struct snd_kcontrol_new universe_ac97_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "AC97 Playback Switch",
@@ -1829,7 +1829,7 @@
};
-static const struct snd_kcontrol_new cs8415_controls[] __devinitdata = {
+static struct snd_kcontrol_new cs8415_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH),
@@ -2107,7 +2107,7 @@
* hence the driver needs to sets up it properly.
*/
-static const unsigned char aureon51_eeprom[] __devinitdata = {
+static unsigned char aureon51_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x0a, /* clock 512, spdif-in/ADC, 3DACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xfc, /* vol, 96k, 24bit, 192k */
@@ -2123,7 +2123,7 @@
[ICE_EEP2_GPIO_STATE2] = 0x00,
};
-static const unsigned char aureon71_eeprom[] __devinitdata = {
+static unsigned char aureon71_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x0b, /* clock 512, spdif-in/ADC, 4DACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xfc, /* vol, 96k, 24bit, 192k */
@@ -2140,7 +2140,7 @@
};
#define prodigy71_eeprom aureon71_eeprom
-static const unsigned char prodigy71lt_eeprom[] __devinitdata = {
+static unsigned char prodigy71lt_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x4b, /* clock 384, spdif-in/ADC, 4DACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xfc, /* vol, 96k, 24bit, 192k */
@@ -2158,7 +2158,7 @@
#define prodigy71xt_eeprom prodigy71lt_eeprom
/* entry point */
-const struct snd_ice1712_card_info snd_vt1724_aureon_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_aureon_cards[] __devinitdata = {
{
.subvendor = VT1724_SUBDEVICE_AUREON51_SKY,
.name = "Terratec Aureon 5.1-Sky",
diff --git a/sound/pci/ice1712/aureon.h b/sound/pci/ice1712/aureon.h
index 79e58e8..c253b8e 100644
--- a/sound/pci/ice1712/aureon.h
+++ b/sound/pci/ice1712/aureon.h
@@ -38,7 +38,7 @@
#define VT1724_SUBDEVICE_PRODIGY71LT 0x32315441 /* PRODIGY 7.1 LT */
#define VT1724_SUBDEVICE_PRODIGY71XT 0x36315441 /* PRODIGY 7.1 XT*/
-extern const struct snd_ice1712_card_info snd_vt1724_aureon_cards[];
+extern struct snd_ice1712_card_info snd_vt1724_aureon_cards[];
/* GPIO bits */
#define AUREON_CS8415_CS (1 << 22)
diff --git a/sound/pci/ice1712/delta.c b/sound/pci/ice1712/delta.c
index 3eeb36c..af65980 100644
--- a/sound/pci/ice1712/delta.c
+++ b/sound/pci/ice1712/delta.c
@@ -416,7 +416,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_ice1712_delta1010lt_wordclock_status __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_delta1010lt_wordclock_status __devinitdata =
{
.access = (SNDRV_CTL_ELEM_ACCESS_READ),
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -429,7 +429,7 @@
* initialize the chips on M-Audio cards
*/
-static const struct snd_akm4xxx akm_audiophile __devinitdata = {
+static struct snd_akm4xxx akm_audiophile __devinitdata = {
.type = SND_AK4528,
.num_adcs = 2,
.num_dacs = 2,
@@ -438,7 +438,7 @@
}
};
-static const struct snd_ak4xxx_private akm_audiophile_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_audiophile_priv __devinitdata = {
.caddr = 2,
.cif = 0,
.data_mask = ICE1712_DELTA_AP_DOUT,
@@ -450,7 +450,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_delta410 __devinitdata = {
+static struct snd_akm4xxx akm_delta410 __devinitdata = {
.type = SND_AK4529,
.num_adcs = 2,
.num_dacs = 8,
@@ -459,7 +459,7 @@
}
};
-static const struct snd_ak4xxx_private akm_delta410_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_delta410_priv __devinitdata = {
.caddr = 0,
.cif = 0,
.data_mask = ICE1712_DELTA_AP_DOUT,
@@ -471,7 +471,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_delta1010lt __devinitdata = {
+static struct snd_akm4xxx akm_delta1010lt __devinitdata = {
.type = SND_AK4524,
.num_adcs = 8,
.num_dacs = 8,
@@ -481,7 +481,7 @@
}
};
-static const struct snd_ak4xxx_private akm_delta1010lt_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_delta1010lt_priv __devinitdata = {
.caddr = 2,
.cif = 0, /* the default level of the CIF pin from AK4524 */
.data_mask = ICE1712_DELTA_1010LT_DOUT,
@@ -493,7 +493,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_delta44 __devinitdata = {
+static struct snd_akm4xxx akm_delta44 __devinitdata = {
.type = SND_AK4524,
.num_adcs = 4,
.num_dacs = 4,
@@ -503,7 +503,7 @@
}
};
-static const struct snd_ak4xxx_private akm_delta44_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_delta44_priv __devinitdata = {
.caddr = 2,
.cif = 0, /* the default level of the CIF pin from AK4524 */
.data_mask = ICE1712_DELTA_CODEC_SERIAL_DATA,
@@ -515,7 +515,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_vx442 __devinitdata = {
+static struct snd_akm4xxx akm_vx442 __devinitdata = {
.type = SND_AK4524,
.num_adcs = 4,
.num_dacs = 4,
@@ -525,7 +525,7 @@
}
};
-static const struct snd_ak4xxx_private akm_vx442_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_vx442_priv __devinitdata = {
.caddr = 2,
.cif = 0,
.data_mask = ICE1712_VX442_DOUT,
@@ -650,15 +650,15 @@
* additional controls for M-Audio cards
*/
-static const struct snd_kcontrol_new snd_ice1712_delta1010_wordclock_select __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_delta1010_wordclock_select __devinitdata =
ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Sync", 0, ICE1712_DELTA_WORD_CLOCK_SELECT, 1, 0);
-static const struct snd_kcontrol_new snd_ice1712_delta1010lt_wordclock_select __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_delta1010lt_wordclock_select __devinitdata =
ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Sync", 0, ICE1712_DELTA_1010LT_WORDCLOCK, 0, 0);
-static const struct snd_kcontrol_new snd_ice1712_delta1010_wordclock_status __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_delta1010_wordclock_status __devinitdata =
ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Word Clock Status", 0, ICE1712_DELTA_WORD_CLOCK_STATUS, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE);
-static const struct snd_kcontrol_new snd_ice1712_deltadio2496_spdif_in_select __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_deltadio2496_spdif_in_select __devinitdata =
ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "IEC958 Input Optical", 0, ICE1712_DELTA_SPDIF_INPUT_SELECT, 0, 0);
-static const struct snd_kcontrol_new snd_ice1712_delta_spdif_in_status __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_delta_spdif_in_status __devinitdata =
ICE1712_GPIO(SNDRV_CTL_ELEM_IFACE_MIXER, "Delta IEC958 Input Status", 0, ICE1712_DELTA_SPDIF_IN_STAT, 1, SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE);
@@ -735,7 +735,7 @@
/* entry point */
-const struct snd_ice1712_card_info snd_ice1712_delta_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_ice1712_delta_cards[] __devinitdata = {
{
.subvendor = ICE1712_SUBDEVICE_DELTA1010,
.name = "M Audio Delta 1010",
diff --git a/sound/pci/ice1712/delta.h b/sound/pci/ice1712/delta.h
index e47861c..2697156 100644
--- a/sound/pci/ice1712/delta.h
+++ b/sound/pci/ice1712/delta.h
@@ -46,7 +46,7 @@
#define ICE1712_SUBDEVICE_MEDIASTATION 0x694c0100
/* entry point */
-extern const struct snd_ice1712_card_info snd_ice1712_delta_cards[];
+extern struct snd_ice1712_card_info snd_ice1712_delta_cards[];
/*
diff --git a/sound/pci/ice1712/ews.c b/sound/pci/ice1712/ews.c
index 9b7ff30..b135389 100644
--- a/sound/pci/ice1712/ews.c
+++ b/sound/pci/ice1712/ews.c
@@ -332,7 +332,7 @@
/*
*/
-static const struct snd_akm4xxx akm_ews88mt __devinitdata = {
+static struct snd_akm4xxx akm_ews88mt __devinitdata = {
.num_adcs = 8,
.num_dacs = 8,
.type = SND_AK4524,
@@ -342,7 +342,7 @@
}
};
-static const struct snd_ak4xxx_private akm_ews88mt_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_ews88mt_priv __devinitdata = {
.caddr = 2,
.cif = 1, /* CIF high */
.data_mask = ICE1712_EWS88_SERIAL_DATA,
@@ -354,7 +354,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_ewx2496 __devinitdata = {
+static struct snd_akm4xxx akm_ewx2496 __devinitdata = {
.num_adcs = 2,
.num_dacs = 2,
.type = SND_AK4524,
@@ -363,7 +363,7 @@
}
};
-static const struct snd_ak4xxx_private akm_ewx2496_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_ewx2496_priv __devinitdata = {
.caddr = 2,
.cif = 1, /* CIF high */
.data_mask = ICE1712_EWS88_SERIAL_DATA,
@@ -375,7 +375,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_6fire __devinitdata = {
+static struct snd_akm4xxx akm_6fire __devinitdata = {
.num_adcs = 6,
.num_dacs = 6,
.type = SND_AK4524,
@@ -384,7 +384,7 @@
}
};
-static const struct snd_ak4xxx_private akm_6fire_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_6fire_priv __devinitdata = {
.caddr = 2,
.cif = 1, /* CIF high */
.data_mask = ICE1712_6FIRE_SERIAL_DATA,
@@ -578,7 +578,7 @@
return val != nval;
}
-static const struct snd_kcontrol_new snd_ice1712_ewx2496_controls[] __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_ewx2496_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Sensitivity Switch",
@@ -678,7 +678,7 @@
return ndata != data;
}
-static const struct snd_kcontrol_new snd_ice1712_ews88mt_input_sense __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_ews88mt_input_sense __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Sensitivity Switch",
.info = snd_ice1712_ewx_io_sense_info,
@@ -687,7 +687,7 @@
.count = 8,
};
-static const struct snd_kcontrol_new snd_ice1712_ews88mt_output_sense __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_ews88mt_output_sense __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Output Sensitivity Switch",
.info = snd_ice1712_ewx_io_sense_info,
@@ -769,7 +769,7 @@
.private_value = xshift | (xinvert << 8),\
}
-static const struct snd_kcontrol_new snd_ice1712_ews88d_controls[] __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_ews88d_controls[] __devinitdata = {
EWS88D_CONTROL(SNDRV_CTL_ELEM_IFACE_MIXER, "IEC958 Input Optical", 0, 1, 0), /* inverted */
EWS88D_CONTROL(SNDRV_CTL_ELEM_IFACE_MIXER, "ADAT Output Optical", 1, 0, 0),
EWS88D_CONTROL(SNDRV_CTL_ELEM_IFACE_MIXER, "ADAT External Master Clock", 2, 0, 0),
@@ -909,7 +909,7 @@
.private_value = xshift | (xinvert << 8),\
}
-static const struct snd_kcontrol_new snd_ice1712_6fire_controls[] __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_6fire_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Analog Input Select",
@@ -989,7 +989,7 @@
/* entry point */
-const struct snd_ice1712_card_info snd_ice1712_ews_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_ice1712_ews_cards[] __devinitdata = {
{
.subvendor = ICE1712_SUBDEVICE_EWX2496,
.name = "TerraTec EWX24/96",
diff --git a/sound/pci/ice1712/ews.h b/sound/pci/ice1712/ews.h
index df449b4..a12a0b0 100644
--- a/sound/pci/ice1712/ews.h
+++ b/sound/pci/ice1712/ews.h
@@ -40,7 +40,7 @@
#define ICE1712_SUBDEVICE_PHASE88 0x3b155111
/* entry point */
-extern const struct snd_ice1712_card_info snd_ice1712_ews_cards[];
+extern struct snd_ice1712_card_info snd_ice1712_ews_cards[];
/* TerraTec EWX 24/96 configuration definitions */
diff --git a/sound/pci/ice1712/hoontech.c b/sound/pci/ice1712/hoontech.c
index df97313..8203562 100644
--- a/sound/pci/ice1712/hoontech.c
+++ b/sound/pci/ice1712/hoontech.c
@@ -239,7 +239,7 @@
static int __devinit snd_ice1712_value_init(struct snd_ice1712 *ice)
{
/* Hoontech STDSP24 with modified hardware */
- static const struct snd_akm4xxx akm_stdsp24_mv __devinitdata = {
+ static struct snd_akm4xxx akm_stdsp24_mv __devinitdata = {
.num_adcs = 2,
.num_dacs = 2,
.type = SND_AK4524,
@@ -248,7 +248,7 @@
}
};
- static const struct snd_ak4xxx_private akm_stdsp24_mv_priv __devinitdata = {
+ static struct snd_ak4xxx_private akm_stdsp24_mv_priv __devinitdata = {
.caddr = 2,
.cif = 1, /* CIF high */
.data_mask = ICE1712_STDSP24_SERIAL_DATA,
@@ -298,7 +298,7 @@
/* entry point */
-const struct snd_ice1712_card_info snd_ice1712_hoontech_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_ice1712_hoontech_cards[] __devinitdata = {
{
.subvendor = ICE1712_SUBDEVICE_STDSP24,
.name = "Hoontech SoundTrack Audio DSP24",
diff --git a/sound/pci/ice1712/hoontech.h b/sound/pci/ice1712/hoontech.h
index b62d6e4..1ee538b 100644
--- a/sound/pci/ice1712/hoontech.h
+++ b/sound/pci/ice1712/hoontech.h
@@ -35,7 +35,7 @@
#define ICE1712_SUBDEVICE_STDSP24_MEDIA7_1 0x16141217 /* Hoontech ST Audio DSP24 Media 7.1 */
#define ICE1712_SUBDEVICE_EVENT_EZ8 0x00010001 /* A dummy id for EZ8 */
-extern const struct snd_ice1712_card_info snd_ice1712_hoontech_cards[];
+extern struct snd_ice1712_card_info snd_ice1712_hoontech_cards[];
/* Hoontech SoundTrack Audio DSP 24 GPIO definitions */
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 830a1bb..6630a0a 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -287,7 +287,7 @@
return val != nval;
}
-static const struct snd_kcontrol_new snd_ice1712_mixer_digmix_route_ac97 __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_mixer_digmix_route_ac97 __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Digital Mixer To AC97",
.info = snd_ice1712_digmix_route_ac97_info,
@@ -977,11 +977,9 @@
{
unsigned int what = 0;
unsigned int old;
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == ice->playback_pro_substream) {
what |= ICE1712_PLAYBACK_START;
snd_pcm_trigger_done(s, substream);
@@ -1380,7 +1378,7 @@
static const DECLARE_TLV_DB_SCALE(db_scale_playback, -14400, 150, 0);
-static const struct snd_kcontrol_new snd_ice1712_multi_playback_ctrls[] __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_multi_playback_ctrls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Playback Switch",
@@ -1404,7 +1402,7 @@
},
};
-static const struct snd_kcontrol_new snd_ice1712_multi_capture_analog_switch __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_multi_capture_analog_switch __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "H/W Multi Capture Switch",
.info = snd_ice1712_pro_mixer_switch_info,
@@ -1413,7 +1411,7 @@
.private_value = 10,
};
-static const struct snd_kcontrol_new snd_ice1712_multi_capture_spdif_switch __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_multi_capture_spdif_switch __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("Multi ",CAPTURE,SWITCH),
.info = snd_ice1712_pro_mixer_switch_info,
@@ -1423,7 +1421,7 @@
.count = 2,
};
-static const struct snd_kcontrol_new snd_ice1712_multi_capture_analog_volume __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_multi_capture_analog_volume __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_TLV_READ),
@@ -1435,7 +1433,7 @@
.tlv = { .p = db_scale_playback }
};
-static const struct snd_kcontrol_new snd_ice1712_multi_capture_spdif_volume __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_multi_capture_spdif_volume __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("Multi ",CAPTURE,VOLUME),
.info = snd_ice1712_pro_mixer_volume_info,
@@ -1627,7 +1625,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_ice1712_eeprom __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_eeprom __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
.name = "ICE1712 EEPROM",
.access = SNDRV_CTL_ELEM_ACCESS_READ,
@@ -1663,7 +1661,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_ice1712_spdif_default __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_spdif_default __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
@@ -1714,7 +1712,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_ice1712_spdif_maskc __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_spdif_maskc __devinitdata =
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
@@ -1723,7 +1721,7 @@
.get = snd_ice1712_spdif_maskc_get,
};
-static const struct snd_kcontrol_new snd_ice1712_spdif_maskp __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_spdif_maskp __devinitdata =
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
@@ -1750,7 +1748,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_ice1712_spdif_stream __devinitdata =
+static struct snd_kcontrol_new snd_ice1712_spdif_stream __devinitdata =
{
.access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_INACTIVE),
@@ -1891,7 +1889,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_ice1712_pro_internal_clock __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_pro_internal_clock __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Internal Clock",
.info = snd_ice1712_pro_internal_clock_info,
@@ -1962,7 +1960,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_ice1712_pro_internal_clock_default __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_pro_internal_clock_default __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Internal Clock Default",
.info = snd_ice1712_pro_internal_clock_default_info,
@@ -2001,7 +1999,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_ice1712_pro_rate_locking __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_pro_rate_locking __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Rate Locking",
.info = snd_ice1712_pro_rate_locking_info,
@@ -2040,7 +2038,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_ice1712_pro_rate_reset __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_pro_rate_reset __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Rate Reset",
.info = snd_ice1712_pro_rate_reset_info,
@@ -2207,7 +2205,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_ice1712_mixer_pro_analog_route __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_mixer_pro_analog_route __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "H/W Playback Route",
.info = snd_ice1712_pro_route_info,
@@ -2215,7 +2213,7 @@
.put = snd_ice1712_pro_route_analog_put,
};
-static const struct snd_kcontrol_new snd_ice1712_mixer_pro_spdif_route __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_mixer_pro_spdif_route __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route",
.info = snd_ice1712_pro_route_info,
@@ -2257,7 +2255,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_ice1712_mixer_pro_volume_rate __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_mixer_pro_volume_rate __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Volume Rate",
.info = snd_ice1712_pro_volume_rate_info,
@@ -2290,7 +2288,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_ice1712_mixer_pro_peak __devinitdata = {
+static struct snd_kcontrol_new snd_ice1712_mixer_pro_peak __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Peak",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
@@ -2305,7 +2303,7 @@
/*
* list of available boards
*/
-static const struct snd_ice1712_card_info *card_tables[] __devinitdata = {
+static struct snd_ice1712_card_info *card_tables[] __devinitdata = {
snd_ice1712_hoontech_cards,
snd_ice1712_delta_cards,
snd_ice1712_ews_cards,
@@ -2329,7 +2327,7 @@
{
int dev = 0xa0; /* EEPROM device address */
unsigned int i, size;
- const struct snd_ice1712_card_info **tbl, *c;
+ struct snd_ice1712_card_info * const *tbl, *c;
if (! modelname || ! *modelname) {
ice->eeprom.subvendor = 0;
@@ -2658,7 +2656,7 @@
*
*/
-static const struct snd_ice1712_card_info no_matched __devinitdata;
+static struct snd_ice1712_card_info no_matched __devinitdata;
static int __devinit snd_ice1712_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
@@ -2667,7 +2665,7 @@
struct snd_card *card;
struct snd_ice1712 *ice;
int pcm_dev = 0, err;
- const struct snd_ice1712_card_info **tbl, *c;
+ struct snd_ice1712_card_info * const *tbl, *c;
if (dev >= SNDRV_CARDS)
return -ENODEV;
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index c3d9fea..6ac486d 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -397,6 +397,9 @@
struct ak4114 *ak4114;
unsigned int analog: 1;
} juli;
+ struct {
+ struct ak4114 *ak4114;
+ } prodigy192;
} spec;
};
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 1127ebd..ee620de 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -337,13 +337,11 @@
struct snd_ice1712 *ice = snd_pcm_substream_chip(substream);
unsigned char what;
unsigned char old;
- struct list_head *pos;
struct snd_pcm_substream *s;
what = 0;
- snd_pcm_group_for_each(pos, substream) {
+ snd_pcm_group_for_each_entry(s, substream) {
const struct vt1724_pcm_reg *reg;
- s = snd_pcm_group_substream_entry(pos);
reg = s->runtime->private_data;
what |= reg->start;
snd_pcm_trigger_done(s, substream);
@@ -1318,7 +1316,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_vt1724_eeprom __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_eeprom __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
.name = "ICE1724 EEPROM",
.access = SNDRV_CTL_ELEM_ACCESS_READ,
@@ -1431,7 +1429,7 @@
return (val != old);
}
-static const struct snd_kcontrol_new snd_vt1724_spdif_default __devinitdata =
+static struct snd_kcontrol_new snd_vt1724_spdif_default __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
@@ -1463,7 +1461,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_vt1724_spdif_maskc __devinitdata =
+static struct snd_kcontrol_new snd_vt1724_spdif_maskc __devinitdata =
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
@@ -1472,7 +1470,7 @@
.get = snd_vt1724_spdif_maskc_get,
};
-static const struct snd_kcontrol_new snd_vt1724_spdif_maskp __devinitdata =
+static struct snd_kcontrol_new snd_vt1724_spdif_maskp __devinitdata =
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
@@ -1517,7 +1515,7 @@
return old != val;
}
-static const struct snd_kcontrol_new snd_vt1724_spdif_switch __devinitdata =
+static struct snd_kcontrol_new snd_vt1724_spdif_switch __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* FIXME: the following conflict with IEC958 Playback Route */
@@ -1668,7 +1666,12 @@
spin_lock_irq(&ice->reg_lock);
oval = inb(ICEMT1724(ice, RATE));
if (ucontrol->value.enumerated.item[0] == spdif) {
+ unsigned char i2s_oval;
outb(oval | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+ /* setting 256fs */
+ i2s_oval = inb(ICEMT1724(ice, I2S_FORMAT));
+ outb(i2s_oval & ~VT1724_MT_I2S_MCLK_128X,
+ ICEMT1724(ice, I2S_FORMAT));
} else {
rate = rates[ucontrol->value.integer.value[0] % 15];
if (rate <= get_max_rate(ice)) {
@@ -1695,7 +1698,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_vt1724_pro_internal_clock __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_pro_internal_clock __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Internal Clock",
.info = snd_vt1724_pro_internal_clock_info,
@@ -1734,7 +1737,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_vt1724_pro_rate_locking __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_pro_rate_locking __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Rate Locking",
.info = snd_vt1724_pro_rate_locking_info,
@@ -1773,7 +1776,7 @@
return change;
}
-static const struct snd_kcontrol_new snd_vt1724_pro_rate_reset __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_pro_rate_reset __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Rate Reset",
.info = snd_vt1724_pro_rate_reset_info,
@@ -1892,7 +1895,7 @@
digital_route_shift(idx));
}
-static const struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_mixer_pro_analog_route __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "H/W Playback Route",
.info = snd_vt1724_pro_route_info,
@@ -1900,7 +1903,7 @@
.put = snd_vt1724_pro_route_analog_put,
};
-static const struct snd_kcontrol_new snd_vt1724_mixer_pro_spdif_route __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_mixer_pro_spdif_route __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Route",
.info = snd_vt1724_pro_route_info,
@@ -1936,7 +1939,7 @@
return 0;
}
-static const struct snd_kcontrol_new snd_vt1724_mixer_pro_peak __devinitdata = {
+static struct snd_kcontrol_new snd_vt1724_mixer_pro_peak __devinitdata = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Multi Track Peak",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
@@ -1948,9 +1951,9 @@
*
*/
-static const struct snd_ice1712_card_info no_matched __devinitdata;
+static struct snd_ice1712_card_info no_matched __devinitdata;
-static const struct snd_ice1712_card_info *card_tables[] __devinitdata = {
+static struct snd_ice1712_card_info *card_tables[] __devinitdata = {
snd_vt1724_revo_cards,
snd_vt1724_amp_cards,
snd_vt1724_aureon_cards,
@@ -2009,7 +2012,7 @@
{
const int dev = 0xa0; /* EEPROM device address */
unsigned int i, size;
- const struct snd_ice1712_card_info **tbl, *c;
+ struct snd_ice1712_card_info * const *tbl, *c;
if (! modelname || ! *modelname) {
ice->eeprom.subvendor = 0;
@@ -2308,7 +2311,7 @@
struct snd_card *card;
struct snd_ice1712 *ice;
int pcm_dev = 0, err;
- const struct snd_ice1712_card_info **tbl, *c;
+ struct snd_ice1712_card_info * const *tbl, *c;
if (dev >= SNDRV_CARDS)
return -ENODEV;
@@ -2347,6 +2350,14 @@
}
c = &no_matched;
__found:
+ /*
+ * VT1724 has separate DMAs for the analog and the SPDIF streams while
+ * ICE1712 has only one for both (mixed up).
+ *
+ * Confusingly the analog PCM is named "professional" here because it
+ * was called so in ice1712 driver, and vt1724 driver is derived from
+ * ice1712 driver.
+ */
if ((err = snd_vt1724_pcm_profi(ice, pcm_dev++)) < 0) {
snd_card_free(card);
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index d88172f..3d8e74e 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -125,7 +125,7 @@
snd_akm4xxx_reset(ak, 0);
}
-static const struct snd_akm4xxx akm_juli_dac __devinitdata = {
+static struct snd_akm4xxx akm_juli_dac __devinitdata = {
.type = SND_AK4358,
.num_dacs = 2,
.ops = {
@@ -138,7 +138,16 @@
static int __devinit juli_add_controls(struct snd_ice1712 *ice)
{
- return snd_ice1712_akm4xxx_build_controls(ice);
+ int err;
+ err = snd_ice1712_akm4xxx_build_controls(ice);
+ if (err < 0)
+ return err;
+ /* only capture SPDIF over AK4114 */
+ err = snd_ak4114_build(ice->spec.juli.ak4114, NULL,
+ ice->pcm_pro->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
+ if (err < 0)
+ return err;
+ return 0;
}
/*
@@ -160,13 +169,6 @@
int err;
struct snd_akm4xxx *ak;
-#if 0
- for (err = 0; err < 0x20; err++)
- juli_ak4114_read(ice, err);
- juli_ak4114_write(ice, 0, 0x0f);
- juli_ak4114_read(ice, 0);
- juli_ak4114_read(ice, 1);
-#endif
err = snd_ak4114_create(ice->card,
juli_ak4114_read,
juli_ak4114_write,
@@ -206,7 +208,7 @@
* hence the driver needs to sets up it properly.
*/
-static const unsigned char juli_eeprom[] __devinitdata = {
+static unsigned char juli_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x20, /* clock 512, mpu401, 1xADC, 1xDACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */
@@ -223,7 +225,7 @@
};
/* entry point */
-const struct snd_ice1712_card_info snd_vt1724_juli_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_juli_cards[] __devinitdata = {
{
.subvendor = VT1724_SUBDEVICE_JULI,
.name = "ESI Juli@",
diff --git a/sound/pci/ice1712/juli.h b/sound/pci/ice1712/juli.h
index 1b9294f..d9f8534 100644
--- a/sound/pci/ice1712/juli.h
+++ b/sound/pci/ice1712/juli.h
@@ -5,6 +5,6 @@
#define VT1724_SUBDEVICE_JULI 0x31305345 /* Juli@ */
-extern const struct snd_ice1712_card_info snd_vt1724_juli_cards[];
+extern struct snd_ice1712_card_info snd_vt1724_juli_cards[];
#endif /* __SOUND_JULI_H */
diff --git a/sound/pci/ice1712/phase.c b/sound/pci/ice1712/phase.c
index 0751718..40a9098 100644
--- a/sound/pci/ice1712/phase.c
+++ b/sound/pci/ice1712/phase.c
@@ -89,13 +89,13 @@
#define WM_VOL_MAX (sizeof(wm_vol) - 1)
#define WM_VOL_MUTE 0x8000
-static const struct snd_akm4xxx akm_phase22 __devinitdata = {
+static struct snd_akm4xxx akm_phase22 __devinitdata = {
.type = SND_AK4524,
.num_dacs = 2,
.num_adcs = 2,
};
-static const struct snd_ak4xxx_private akm_phase22_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_phase22_priv __devinitdata = {
.caddr = 2,
.cif = 1,
.data_mask = 1 << 4,
@@ -152,7 +152,7 @@
return 0;
}
-static const unsigned char phase22_eeprom[] __devinitdata = {
+static unsigned char phase22_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x00, /* 1xADC, 1xDACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit */
@@ -168,7 +168,7 @@
[ICE_EEP2_GPIO_STATE2] = 0x00,
};
-static const unsigned char phase28_eeprom[] __devinitdata = {
+static unsigned char phase28_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x0b, /* clock 512, spdif-in/ADC, 4DACs */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xfc, /* vol, 96k, 24bit, 192k */
@@ -700,7 +700,7 @@
static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
static const DECLARE_TLV_DB_SCALE(db_scale_wm_pcm, -6400, 50, 1);
-static const struct snd_kcontrol_new phase28_dac_controls[] __devinitdata = {
+static struct snd_kcontrol_new phase28_dac_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
@@ -815,7 +815,7 @@
}
};
-static const struct snd_kcontrol_new wm_controls[] __devinitdata = {
+static struct snd_kcontrol_new wm_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "PCM Playback Switch",
@@ -870,7 +870,7 @@
return 0;
}
-const struct snd_ice1712_card_info snd_vt1724_phase_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_phase_cards[] __devinitdata = {
{
.subvendor = VT1724_SUBDEVICE_PHASE22,
.name = "Terratec PHASE 22",
diff --git a/sound/pci/ice1712/phase.h b/sound/pci/ice1712/phase.h
index ad379a9..13e841b 100644
--- a/sound/pci/ice1712/phase.h
+++ b/sound/pci/ice1712/phase.h
@@ -31,7 +31,7 @@
#define VT1724_SUBDEVICE_PHASE28 0x3b154911
/* entry point */
-extern const struct snd_ice1712_card_info snd_vt1724_phase_cards[];
+extern struct snd_ice1712_card_info snd_vt1724_phase_cards[];
/* PHASE28 GPIO bits */
#define PHASE28_SPI_MISO (1 << 21)
diff --git a/sound/pci/ice1712/pontis.c b/sound/pci/ice1712/pontis.c
index 9552497..01c6945 100644
--- a/sound/pci/ice1712/pontis.c
+++ b/sound/pci/ice1712/pontis.c
@@ -571,7 +571,7 @@
* mixers
*/
-static const struct snd_kcontrol_new pontis_controls[] __devinitdata = {
+static struct snd_kcontrol_new pontis_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
@@ -826,7 +826,7 @@
* hence the driver needs to sets up it properly.
*/
-static const unsigned char pontis_eeprom[] __devinitdata = {
+static unsigned char pontis_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x08, /* clock 256, mpu401, spdif-in/ADC, 1DAC */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */
@@ -843,7 +843,7 @@
};
/* entry point */
-const struct snd_ice1712_card_info snd_vt1720_pontis_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1720_pontis_cards[] __devinitdata = {
{
.subvendor = VT1720_SUBDEVICE_PONTIS_MS300,
.name = "Pontis MS300",
diff --git a/sound/pci/ice1712/pontis.h b/sound/pci/ice1712/pontis.h
index 1a41825..d0d1378 100644
--- a/sound/pci/ice1712/pontis.h
+++ b/sound/pci/ice1712/pontis.h
@@ -28,6 +28,6 @@
#define VT1720_SUBDEVICE_PONTIS_MS300 0x00020002 /* a dummy id for MS300 */
-extern const struct snd_ice1712_card_info snd_vt1720_pontis_cards[];
+extern struct snd_ice1712_card_info snd_vt1720_pontis_cards[];
#endif /* __SOUND_PONTIS_H */
diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c
index 31cc66e..f03c02c 100644
--- a/sound/pci/ice1712/prodigy192.c
+++ b/sound/pci/ice1712/prodigy192.c
@@ -2,6 +2,37 @@
* ALSA driver for ICEnsemble VT1724 (Envy24HT)
*
* Lowlevel functions for AudioTrak Prodigy 192 cards
+ * Supported IEC958 input from optional MI/ODI/O add-on card.
+ *
+ * Specifics (SW, HW):
+ * -------------------
+ * * 49.5MHz crystal
+ * * SPDIF-OUT on the card:
+ * - coax (through isolation transformer)/toslink supplied by
+ * 74HC04 gates - 3 in parallel
+ * - output switched between on-board CD drive dig-out connector
+ * and ice1724 SPDTX pin, using 74HC02 NOR gates, controlled
+ * by GPIO20 (0 = CD dig-out, 1 = SPDTX)
+ * * SPDTX goes straight to MI/ODI/O card's SPDIF-OUT coax
+ *
+ * * MI/ODI/O card: AK4114 based, used for iec958 input only
+ * - toslink input -> RX0
+ * - coax input -> RX1
+ * - 4wire protocol:
+ * AK4114 ICE1724
+ * ------------------------------
+ * CDTO (pin 32) -- GPIO11 pin 86
+ * CDTI (pin 33) -- GPIO10 pin 77
+ * CCLK (pin 34) -- GPIO9 pin 76
+ * CSN (pin 35) -- GPIO8 pin 75
+ * - output data Mode 7 (24bit, I2S, slave)
+ * - both MCKO1 and MCKO2 of ak4114 are fed to FPGA, which
+ * outputs master clock to SPMCLKIN of ice1724.
+ * Experimentally I found out that only a combination of
+ * OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 -
+ * VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct
+ * sampling rate. That means the the FPGA doubles the
+ * MCK01 rate.
*
* Copyright (c) 2003 Takashi Iwai <tiwai@suse.de>
* Copyright (c) 2003 Dimitromanolakis Apostolos <apostol@cs.utoronto.ca>
@@ -356,6 +387,47 @@
return 0;
}
#endif
+static int stac9460_mic_sw_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *texts[2] = { "Line In", "Mic" };
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+
+ if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+ uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1;
+ strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
+
+ return 0;
+}
+
+
+static int stac9460_mic_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned char val;
+
+ val = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
+ ucontrol->value.enumerated.item[0] = (val >> 7) & 0x1;
+ return 0;
+}
+
+static int stac9460_mic_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned char new, old;
+ int change;
+ old = stac9460_get(ice, STAC946X_GENERAL_PURPOSE);
+ new = (ucontrol->value.enumerated.item[0] << 7 & 0x80) | (old & ~0x80);
+ change = (new != old);
+ if (change)
+ stac9460_put(ice, STAC946X_GENERAL_PURPOSE, new);
+ return change;
+}
static const DECLARE_TLV_DB_SCALE(db_scale_dac, -19125, 75, 0);
static const DECLARE_TLV_DB_SCALE(db_scale_adc, 0, 150, 0);
@@ -364,7 +436,7 @@
* mixers
*/
-static const struct snd_kcontrol_new stac_controls[] __devinitdata = {
+static struct snd_kcontrol_new stac_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
@@ -406,7 +478,7 @@
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "ADC Switch",
+ .name = "ADC Capture Switch",
.count = 1,
.info = stac9460_adc_mute_info,
.get = stac9460_adc_mute_get,
@@ -417,13 +489,21 @@
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_TLV_READ),
- .name = "ADC Volume",
+ .name = "ADC Capture Volume",
.count = 1,
.info = stac9460_adc_vol_info,
.get = stac9460_adc_vol_get,
.put = stac9460_adc_vol_put,
.tlv = { .p = db_scale_adc }
},
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog Capture Input",
+ .info = stac9460_mic_sw_info,
+ .get = stac9460_mic_sw_get,
+ .put = stac9460_mic_sw_put,
+
+ },
#if 0
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -456,19 +536,261 @@
#endif
};
+
+/* AK4114 - ICE1724 connections on Prodigy192 + MI/ODI/O */
+/* CDTO (pin 32) -- GPIO11 pin 86
+ * CDTI (pin 33) -- GPIO10 pin 77
+ * CCLK (pin 34) -- GPIO9 pin 76
+ * CSN (pin 35) -- GPIO8 pin 75
+ */
+#define AK4114_ADDR 0x00 /* C1-C0: Chip Address
+ * (According to datasheet fixed to “00”)
+ */
+
+/*
+ * 4wire ak4114 protocol - writing data
+ */
+static void write_data(struct snd_ice1712 *ice, unsigned int gpio,
+ unsigned int data, int idx)
+{
+ for (; idx >= 0; idx--) {
+ /* drop clock */
+ gpio &= ~VT1724_PRODIGY192_CCLK;
+ snd_ice1712_gpio_write(ice, gpio);
+ udelay(1);
+ /* set data */
+ if (data & (1 << idx))
+ gpio |= VT1724_PRODIGY192_CDOUT;
+ else
+ gpio &= ~VT1724_PRODIGY192_CDOUT;
+ snd_ice1712_gpio_write(ice, gpio);
+ udelay(1);
+ /* raise clock */
+ gpio |= VT1724_PRODIGY192_CCLK;
+ snd_ice1712_gpio_write(ice, gpio);
+ udelay(1);
+ }
+}
+
+/*
+ * 4wire ak4114 protocol - reading data
+ */
+static unsigned char read_data(struct snd_ice1712 *ice, unsigned int gpio,
+ int idx)
+{
+ unsigned char data = 0;
+
+ for (; idx >= 0; idx--) {
+ /* drop clock */
+ gpio &= ~VT1724_PRODIGY192_CCLK;
+ snd_ice1712_gpio_write(ice, gpio);
+ udelay(1);
+ /* read data */
+ if (snd_ice1712_gpio_read(ice) & VT1724_PRODIGY192_CDIN)
+ data |= (1 << idx);
+ udelay(1);
+ /* raise clock */
+ gpio |= VT1724_PRODIGY192_CCLK;
+ snd_ice1712_gpio_write(ice, gpio);
+ udelay(1);
+ }
+ return data;
+}
+/*
+ * 4wire ak4114 protocol - starting sequence
+ */
+static unsigned int prodigy192_4wire_start(struct snd_ice1712 *ice)
+{
+ unsigned int tmp;
+
+ snd_ice1712_save_gpio_status(ice);
+ tmp = snd_ice1712_gpio_read(ice);
+
+ tmp |= VT1724_PRODIGY192_CCLK; /* high at init */
+ tmp &= ~VT1724_PRODIGY192_CS; /* drop chip select */
+ snd_ice1712_gpio_write(ice, tmp);
+ udelay(1);
+ return tmp;
+}
+
+/*
+ * 4wire ak4114 protocol - final sequence
+ */
+static void prodigy192_4wire_finish(struct snd_ice1712 *ice, unsigned int tmp)
+{
+ tmp |= VT1724_PRODIGY192_CS; /* raise chip select */
+ snd_ice1712_gpio_write(ice, tmp);
+ udelay(1);
+ snd_ice1712_restore_gpio_status(ice);
+}
+
+/*
+ * Write data to addr register of ak4114
+ */
+static void prodigy192_ak4114_write(void *private_data, unsigned char addr,
+ unsigned char data)
+{
+ struct snd_ice1712 *ice = private_data;
+ unsigned int tmp, addrdata;
+ tmp = prodigy192_4wire_start(ice);
+ addrdata = (AK4114_ADDR << 6) | 0x20 | (addr & 0x1f);
+ addrdata = (addrdata << 8) | data;
+ write_data(ice, tmp, addrdata, 15);
+ prodigy192_4wire_finish(ice, tmp);
+}
+
+/*
+ * Read data from addr register of ak4114
+ */
+static unsigned char prodigy192_ak4114_read(void *private_data,
+ unsigned char addr)
+{
+ struct snd_ice1712 *ice = private_data;
+ unsigned int tmp;
+ unsigned char data;
+
+ tmp = prodigy192_4wire_start(ice);
+ write_data(ice, tmp, (AK4114_ADDR << 6) | (addr & 0x1f), 7);
+ data = read_data(ice, tmp, 7);
+ prodigy192_4wire_finish(ice, tmp);
+ return data;
+}
+
+
+static int ak4114_input_sw_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static char *texts[2] = { "Toslink", "Coax" };
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+ uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1;
+ strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+
+static int ak4114_input_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned char val;
+
+ val = prodigy192_ak4114_read(ice, AK4114_REG_IO1);
+ /* AK4114_IPS0 bit = 0 -> RX0 = Toslink
+ * AK4114_IPS0 bit = 1 -> RX1 = Coax
+ */
+ ucontrol->value.enumerated.item[0] = (val & AK4114_IPS0) ? 1 : 0;
+ return 0;
+}
+
+static int ak4114_input_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned char new, old, itemvalue;
+ int change;
+
+ old = prodigy192_ak4114_read(ice, AK4114_REG_IO1);
+ /* AK4114_IPS0 could be any bit */
+ itemvalue = (ucontrol->value.enumerated.item[0]) ? 0xff : 0x00;
+
+ new = (itemvalue & AK4114_IPS0) | (old & ~AK4114_IPS0);
+ change = (new != old);
+ if (change)
+ prodigy192_ak4114_write(ice, AK4114_REG_IO1, new);
+ return change;
+}
+
+
+static const struct snd_kcontrol_new ak4114_controls[] __devinitdata = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "MIODIO IEC958 Capture Input",
+ .info = ak4114_input_sw_info,
+ .get = ak4114_input_sw_get,
+ .put = ak4114_input_sw_put,
+
+ }
+};
+
+
+static int prodigy192_ak4114_init(struct snd_ice1712 *ice)
+{
+ static const unsigned char ak4114_init_vals[] = {
+ AK4114_RST | AK4114_PWN | AK4114_OCKS0 | AK4114_OCKS1,
+ /* ice1724 expects I2S and provides clock,
+ * DEM0 disables the deemphasis filter
+ */
+ AK4114_DIF_I24I2S | AK4114_DEM0 ,
+ AK4114_TX1E,
+ AK4114_EFH_1024 | AK4114_DIT, /* default input RX0 */
+ 0,
+ 0
+ };
+ static const unsigned char ak4114_init_txcsb[] = {
+ 0x41, 0x02, 0x2c, 0x00, 0x00
+ };
+
+ return snd_ak4114_create(ice->card,
+ prodigy192_ak4114_read,
+ prodigy192_ak4114_write,
+ ak4114_init_vals, ak4114_init_txcsb,
+ ice, &ice->spec.prodigy192.ak4114);
+}
+
static int __devinit prodigy192_add_controls(struct snd_ice1712 *ice)
{
unsigned int i;
int err;
for (i = 0; i < ARRAY_SIZE(stac_controls); i++) {
- err = snd_ctl_add(ice->card, snd_ctl_new1(&stac_controls[i], ice));
+ err = snd_ctl_add(ice->card,
+ snd_ctl_new1(&stac_controls[i], ice));
+ if (err < 0)
+ return err;
+ }
+ if (ice->spec.prodigy192.ak4114) {
+ /* ak4114 is connected */
+ for (i = 0; i < ARRAY_SIZE(ak4114_controls); i++) {
+ err = snd_ctl_add(ice->card,
+ snd_ctl_new1(&ak4114_controls[i],
+ ice));
+ if (err < 0)
+ return err;
+ }
+ err = snd_ak4114_build(ice->spec.prodigy192.ak4114,
+ NULL, /* ak4114 in MIO/DI/O handles no IEC958 output */
+ ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
if (err < 0)
return err;
}
return 0;
}
+/*
+ * check for presence of MI/ODI/O add-on card with digital inputs
+ */
+static int prodigy192_miodio_exists(struct snd_ice1712 *ice)
+{
+
+ unsigned char orig_value;
+ const unsigned char test_data = 0xd1; /* random value */
+ unsigned char addr = AK4114_REG_INT0_MASK; /* random SAFE address */
+ int exists = 0;
+
+ orig_value = prodigy192_ak4114_read(ice, addr);
+ prodigy192_ak4114_write(ice, addr, test_data);
+ if (prodigy192_ak4114_read(ice, addr) == test_data) {
+ /* ak4114 seems to communicate, apparently exists */
+ /* writing back original value */
+ prodigy192_ak4114_write(ice, addr, orig_value);
+ exists = 1;
+ }
+ return exists;
+}
/*
* initialize the chip
@@ -487,16 +809,30 @@
(unsigned short)-1
};
const unsigned short *p;
+ int err = 0;
/* prodigy 192 */
ice->num_total_dacs = 6;
ice->num_total_adcs = 2;
+ ice->vt1720 = 0; /* ice1724, e.g. 23 GPIOs */
/* initialize codec */
p = stac_inits_prodigy;
for (; *p != (unsigned short)-1; p += 2)
stac9460_put(ice, p[0], p[1]);
+ /* MI/ODI/O add on card with AK4114 */
+ if (prodigy192_miodio_exists(ice)) {
+ err = prodigy192_ak4114_init(ice);
+ /* from this moment if err = 0 then
+ * ice->spec.prodigy192.ak4114 should not be null
+ */
+ snd_printdd("AK4114 initialized with status %d\n", err);
+ } else
+ snd_printdd("AK4114 not found\n");
+ if (err < 0)
+ return err;
+
return 0;
}
@@ -506,25 +842,31 @@
* hence the driver needs to sets up it properly.
*/
-static const unsigned char prodigy71_eeprom[] __devinitdata = {
- [ICE_EEP2_SYSCONF] = 0x2b, /* clock 512, mpu401, spdif-in/ADC, 4DACs */
+static unsigned char prodigy71_eeprom[] __devinitdata = {
+ [ICE_EEP2_SYSCONF] = 0x6a, /* 49MHz crystal, mpu401,
+ * spdif-in+ 1 stereo ADC,
+ * 3 stereo DACs
+ */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */
[ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
[ICE_EEP2_GPIO_DIR] = 0xff,
- [ICE_EEP2_GPIO_DIR1] = 0xff,
+ [ICE_EEP2_GPIO_DIR1] = ~(VT1724_PRODIGY192_CDIN >> 8) ,
[ICE_EEP2_GPIO_DIR2] = 0xbf,
[ICE_EEP2_GPIO_MASK] = 0x00,
[ICE_EEP2_GPIO_MASK1] = 0x00,
[ICE_EEP2_GPIO_MASK2] = 0x00,
[ICE_EEP2_GPIO_STATE] = 0x00,
[ICE_EEP2_GPIO_STATE1] = 0x00,
- [ICE_EEP2_GPIO_STATE2] = 0x00,
+ [ICE_EEP2_GPIO_STATE2] = 0x10, /* GPIO20: 0 = CD drive dig. input
+ * passthrough,
+ * 1 = SPDIF-OUT from ice1724
+ */
};
/* entry point */
-const struct snd_ice1712_card_info snd_vt1724_prodigy192_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_prodigy192_cards[] __devinitdata = {
{
.subvendor = VT1724_SUBDEVICE_PRODIGY192VE,
.name = "Audiotrak Prodigy 192",
diff --git a/sound/pci/ice1712/prodigy192.h b/sound/pci/ice1712/prodigy192.h
index 2fa2e62..16a53b4 100644
--- a/sound/pci/ice1712/prodigy192.h
+++ b/sound/pci/ice1712/prodigy192.h
@@ -5,7 +5,15 @@
#define PRODIGY192_STAC9460_ADDR 0x54
#define VT1724_SUBDEVICE_PRODIGY192VE 0x34495345 /* PRODIGY 192 VE */
+/*
+ * AudioTrak Prodigy192 GPIO definitions for MI/ODI/O card with
+ * AK4114 (SPDIF-IN)
+ */
+#define VT1724_PRODIGY192_CS (1 << 8) /* GPIO8, pin 75 */
+#define VT1724_PRODIGY192_CCLK (1 << 9) /* GPIO9, pin 76 */
+#define VT1724_PRODIGY192_CDOUT (1 << 10) /* GPIO10, pin 77 */
+#define VT1724_PRODIGY192_CDIN (1 << 11) /* GPIO11, pin 86 */
-extern const struct snd_ice1712_card_info snd_vt1724_prodigy192_cards[];
+extern struct snd_ice1712_card_info snd_vt1724_prodigy192_cards[];
#endif /* __SOUND_PRODIGY192_H */
diff --git a/sound/pci/ice1712/revo.c b/sound/pci/ice1712/revo.c
index 025a7e8..690ceb3 100644
--- a/sound/pci/ice1712/revo.c
+++ b/sound/pci/ice1712/revo.c
@@ -219,7 +219,7 @@
},
};
-static const struct snd_akm4xxx akm_revo_front __devinitdata = {
+static struct snd_akm4xxx akm_revo_front __devinitdata = {
.type = SND_AK4381,
.num_dacs = 2,
.ops = {
@@ -228,7 +228,7 @@
.dac_info = revo71_front,
};
-static const struct snd_ak4xxx_private akm_revo_front_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_revo_front_priv __devinitdata = {
.caddr = 1,
.cif = 0,
.data_mask = VT1724_REVO_CDOUT,
@@ -240,7 +240,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_revo_surround __devinitdata = {
+static struct snd_akm4xxx akm_revo_surround __devinitdata = {
.type = SND_AK4355,
.idx_offset = 1,
.num_dacs = 6,
@@ -250,7 +250,7 @@
.dac_info = revo71_surround,
};
-static const struct snd_ak4xxx_private akm_revo_surround_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_revo_surround_priv __devinitdata = {
.caddr = 3,
.cif = 0,
.data_mask = VT1724_REVO_CDOUT,
@@ -262,7 +262,7 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_revo51 __devinitdata = {
+static struct snd_akm4xxx akm_revo51 __devinitdata = {
.type = SND_AK4358,
.num_dacs = 6,
.ops = {
@@ -271,7 +271,7 @@
.dac_info = revo51_dac,
};
-static const struct snd_ak4xxx_private akm_revo51_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_revo51_priv __devinitdata = {
.caddr = 2,
.cif = 0,
.data_mask = VT1724_REVO_CDOUT,
@@ -283,13 +283,13 @@
.mask_flags = 0,
};
-static const struct snd_akm4xxx akm_revo51_adc __devinitdata = {
+static struct snd_akm4xxx akm_revo51_adc __devinitdata = {
.type = SND_AK5365,
.num_adcs = 2,
.adc_info = revo51_adc,
};
-static const struct snd_ak4xxx_private akm_revo51_adc_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_revo51_adc_priv __devinitdata = {
.caddr = 2,
.cif = 0,
.data_mask = VT1724_REVO_CDOUT,
@@ -324,7 +324,7 @@
AK_DAC("PCM Playback Volume", 2)
};
-static const struct snd_akm4xxx akm_ap192 __devinitdata = {
+static struct snd_akm4xxx akm_ap192 __devinitdata = {
.type = SND_AK4358,
.num_dacs = 2,
.ops = {
@@ -333,7 +333,7 @@
.dac_info = ap192_dac,
};
-static const struct snd_ak4xxx_private akm_ap192_priv __devinitdata = {
+static struct snd_ak4xxx_private akm_ap192_priv __devinitdata = {
.caddr = 2,
.cif = 0,
.data_mask = VT1724_REVO_CDOUT,
@@ -405,7 +405,7 @@
return data;
}
-static unsigned char ap192_4wire_start(struct snd_ice1712 *ice)
+static unsigned int ap192_4wire_start(struct snd_ice1712 *ice)
{
unsigned int tmp;
@@ -454,7 +454,7 @@
return data;
}
-static int ap192_ak4114_init(struct snd_ice1712 *ice)
+static int __devinit ap192_ak4114_init(struct snd_ice1712 *ice)
{
static const unsigned char ak4114_init_vals[] = {
AK4114_RST | AK4114_PWN | AK4114_OCKS0 | AK4114_OCKS1,
@@ -582,7 +582,7 @@
}
/* entry point */
-const struct snd_ice1712_card_info snd_vt1724_revo_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1724_revo_cards[] __devinitdata = {
{
.subvendor = VT1724_SUBDEVICE_REVOLUTION71,
.name = "M Audio Revolution-7.1",
diff --git a/sound/pci/ice1712/revo.h b/sound/pci/ice1712/revo.h
index 2a24488..a3ba425 100644
--- a/sound/pci/ice1712/revo.h
+++ b/sound/pci/ice1712/revo.h
@@ -34,7 +34,7 @@
#define VT1724_SUBDEVICE_AUDIOPHILE192 0x12143236
/* entry point */
-extern const struct snd_ice1712_card_info snd_vt1724_revo_cards[];
+extern struct snd_ice1712_card_info snd_vt1724_revo_cards[];
/*
diff --git a/sound/pci/ice1712/vt1720_mobo.c b/sound/pci/ice1712/vt1720_mobo.c
index 72b060d..2395241 100644
--- a/sound/pci/ice1712/vt1720_mobo.c
+++ b/sound/pci/ice1712/vt1720_mobo.c
@@ -56,7 +56,7 @@
/* EEPROM image */
-static const unsigned char k8x800_eeprom[] __devinitdata = {
+static unsigned char k8x800_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x01, /* clock 256, 1ADC, 2DACs */
[ICE_EEP2_ACLINK] = 0x02, /* ACLINK, packed */
[ICE_EEP2_I2S] = 0x00, /* - */
@@ -72,7 +72,7 @@
[ICE_EEP2_GPIO_STATE2] = 0x00, /* - */
};
-static const unsigned char sn25p_eeprom[] __devinitdata = {
+static unsigned char sn25p_eeprom[] __devinitdata = {
[ICE_EEP2_SYSCONF] = 0x01, /* clock 256, 1ADC, 2DACs */
[ICE_EEP2_ACLINK] = 0x02, /* ACLINK, packed */
[ICE_EEP2_I2S] = 0x00, /* - */
@@ -90,7 +90,7 @@
/* entry point */
-const struct snd_ice1712_card_info snd_vt1720_mobo_cards[] __devinitdata = {
+struct snd_ice1712_card_info snd_vt1720_mobo_cards[] __devinitdata = {
{
.subvendor = VT1720_SUBDEVICE_K8X800,
.name = "Albatron K8X800 Pro II",
diff --git a/sound/pci/ice1712/vt1720_mobo.h b/sound/pci/ice1712/vt1720_mobo.h
index 70af3ad..0b1b0ee 100644
--- a/sound/pci/ice1712/vt1720_mobo.h
+++ b/sound/pci/ice1712/vt1720_mobo.h
@@ -36,6 +36,6 @@
#define VT1720_SUBDEVICE_9CJS 0x0f272327
#define VT1720_SUBDEVICE_SN25P 0x97123650
-extern const struct snd_ice1712_card_info snd_vt1720_mobo_cards[];
+extern struct snd_ice1712_card_info snd_vt1720_mobo_cards[];
#endif /* __SOUND_VT1720_MOBO_H */
diff --git a/sound/pci/ice1712/wtm.c b/sound/pci/ice1712/wtm.c
index 4a706b1..04e535c 100644
--- a/sound/pci/ice1712/wtm.c
+++ b/sound/pci/ice1712/wtm.c
@@ -409,7 +409,7 @@
/*
* Control tabs
*/
-static const struct snd_kcontrol_new stac9640_controls[] __devinitdata = {
+static struct snd_kcontrol_new stac9640_controls[] __devinitdata = {
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Master Playback Switch",
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 7cf2dcb..202f720 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2493,6 +2493,7 @@
return -EIO;
}
pci_set_master(pci);
+ snd_intel8x0_chip_init(chip, 0);
if (request_irq(pci->irq, snd_intel8x0_interrupt,
IRQF_SHARED, card->shortname, chip)) {
printk(KERN_ERR "intel8x0: unable to grab IRQ %d, "
@@ -2502,7 +2503,6 @@
}
chip->irq = pci->irq;
synchronize_irq(chip->irq);
- snd_intel8x0_chip_init(chip, 0);
/* re-initialize mixer stuff */
if (chip->device_type == DEVICE_INTEL_ICH4 && !spdif_aclink) {
@@ -2862,16 +2862,7 @@
ICH_REG_ALI_INTERRUPTSR : ICH_REG_GLOB_STA;
chip->int_sta_mask = int_sta_masks;
- /* request irq after initializaing int_sta_mask, etc */
- if (request_irq(pci->irq, snd_intel8x0_interrupt,
- IRQF_SHARED, card->shortname, chip)) {
- snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
- snd_intel8x0_free(chip);
- return -EBUSY;
- }
- chip->irq = pci->irq;
pci_set_master(pci);
- synchronize_irq(chip->irq);
switch(chip->device_type) {
case DEVICE_INTEL_ICH4:
@@ -2901,6 +2892,15 @@
return err;
}
+ /* request irq after initializaing int_sta_mask, etc */
+ if (request_irq(pci->irq, snd_intel8x0_interrupt,
+ IRQF_SHARED, card->shortname, chip)) {
+ snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+ snd_intel8x0_free(chip);
+ return -EBUSY;
+ }
+ chip->irq = pci->irq;
+
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
snd_intel8x0_free(chip);
return err;
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 21d0899a..5338243 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -264,9 +264,7 @@
#define COMMAND_ACK_DELAY 13 // number of RTC ticks to wait for an acknowledgement
// from the card after sending a command.
-#define FIRMWARE_IN_THE_KERNEL
-
-#ifdef FIRMWARE_IN_THE_KERNEL
+#ifdef CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
#include "korg1212-firmware.h"
static const struct firmware static_dsp_code = {
.data = (u8 *)dspCode,
@@ -418,6 +416,9 @@
MODULE_DESCRIPTION("korg1212");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{KORG,korg1212}}");
+#ifndef CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
+MODULE_FIRMWARE("korg/k1212.dsp");
+#endif
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
@@ -2342,26 +2343,25 @@
korg1212->AdatTimeCodePhy = korg1212->sharedBufferPhy +
offsetof(struct KorgSharedBuffer, AdatTimeCode);
+#ifdef CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
+ dsp_code = &static_dsp_code;
+#else
err = request_firmware(&dsp_code, "korg/k1212.dsp", &pci->dev);
if (err < 0) {
release_firmware(dsp_code);
-#ifdef FIRMWARE_IN_THE_KERNEL
- dsp_code = &static_dsp_code;
-#else
snd_printk(KERN_ERR "firmware not available\n");
snd_korg1212_free(korg1212);
return err;
-#endif
}
+#endif
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
dsp_code->size, &korg1212->dma_dsp) < 0) {
snd_printk(KERN_ERR "korg1212: cannot allocate dsp code memory (%zd bytes)\n", dsp_code->size);
snd_korg1212_free(korg1212);
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (dsp_code != &static_dsp_code)
+#ifndef CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
+ release_firmware(dsp_code);
#endif
- release_firmware(dsp_code);
return -ENOMEM;
}
@@ -2371,10 +2371,9 @@
memcpy(korg1212->dma_dsp.area, dsp_code->data, dsp_code->size);
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (dsp_code != &static_dsp_code)
+#ifndef CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL
+ release_firmware(dsp_code);
#endif
- release_firmware(dsp_code);
rc = snd_korg1212_Send1212Command(korg1212, K1212_DB_RebootCard, 0, 0, 0, 0);
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 4526904..8a5ff1c 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -59,6 +59,10 @@
"{ESS,Allegro PCI},"
"{ESS,Allegro-1 PCI},"
"{ESS,Canyon3D-2/LE PCI}}");
+#ifndef CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL
+MODULE_FIRMWARE("ess/maestro3_assp_kernel.fw");
+MODULE_FIRMWARE("ess/maestro3_assp_minisrc.fw");
+#endif
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
@@ -2101,9 +2105,7 @@
}
-#define FIRMWARE_IN_THE_KERNEL
-
-#ifdef FIRMWARE_IN_THE_KERNEL
+#ifdef CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL
/*
* DSP Code images
@@ -2242,7 +2244,7 @@
.size = sizeof assp_minisrc_image
};
-#endif /* FIRMWARE_IN_THE_KERNEL */
+#else /* CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL */
#ifdef __LITTLE_ENDIAN
static inline void snd_m3_convert_from_le(const struct firmware *fw) { }
@@ -2257,6 +2259,8 @@
}
#endif
+#endif /* CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL */
+
/*
* initialize ASSP
@@ -2550,14 +2554,10 @@
if (chip->iobase)
pci_release_regions(chip->pci);
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (chip->assp_kernel_image != &assp_kernel)
+#ifndef CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL
+ release_firmware(chip->assp_kernel_image);
+ release_firmware(chip->assp_minisrc_image);
#endif
- release_firmware(chip->assp_kernel_image);
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (chip->assp_minisrc_image != &assp_minisrc)
-#endif
- release_firmware(chip->assp_minisrc_image);
pci_disable_device(chip->pci);
kfree(chip);
@@ -2747,29 +2747,29 @@
return -ENOMEM;
}
+#ifdef CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL
+ chip->assp_kernel_image = &assp_kernel;
+#else
err = request_firmware(&chip->assp_kernel_image,
"ess/maestro3_assp_kernel.fw", &pci->dev);
if (err < 0) {
-#ifdef FIRMWARE_IN_THE_KERNEL
- chip->assp_kernel_image = &assp_kernel;
-#else
snd_m3_free(chip);
return err;
-#endif
} else
snd_m3_convert_from_le(chip->assp_kernel_image);
+#endif
+#ifdef CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL
+ chip->assp_minisrc_image = &assp_minisrc;
+#else
err = request_firmware(&chip->assp_minisrc_image,
"ess/maestro3_assp_minisrc.fw", &pci->dev);
if (err < 0) {
-#ifdef FIRMWARE_IN_THE_KERNEL
- chip->assp_minisrc_image = &assp_minisrc;
-#else
snd_m3_free(chip);
return err;
-#endif
} else
snd_m3_convert_from_le(chip->assp_minisrc_image);
+#endif
if ((err = pci_request_regions(pci, card->driver)) < 0) {
snd_m3_free(chip);
diff --git a/sound/pci/mixart/mixart_hwdep.c b/sound/pci/mixart/mixart_hwdep.c
index ca05075..1d9232d 100644
--- a/sound/pci/mixart/mixart_hwdep.c
+++ b/sound/pci/mixart/mixart_hwdep.c
@@ -565,6 +565,9 @@
return 0;
}
+MODULE_FIRMWARE("mixart/miXart8.xlx");
+MODULE_FIRMWARE("mixart/miXart8.elf");
+MODULE_FIRMWARE("mixart/miXart8AES.xlx");
#else /* old style firmware loading */
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index d974134..f7f6a68 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -638,22 +638,22 @@
static int pcxhr_trigger(struct snd_pcm_substream *subs, int cmd)
{
struct pcxhr_stream *stream;
- struct list_head *pos;
struct snd_pcm_substream *s;
- int i;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
snd_printdd("SNDRV_PCM_TRIGGER_START\n");
- i = 0;
- snd_pcm_group_for_each(pos, subs) {
- s = snd_pcm_group_substream_entry(pos);
- stream = s->runtime->private_data;
- stream->status = PCXHR_STREAM_STATUS_SCHEDULE_RUN;
- snd_pcm_trigger_done(s, subs);
- i++;
- }
- if (i==1) {
+ if (snd_pcm_stream_linked(subs)) {
+ struct snd_pcxhr *chip = snd_pcm_substream_chip(subs);
+ snd_pcm_group_for_each_entry(s, subs) {
+ stream = s->runtime->private_data;
+ stream->status =
+ PCXHR_STREAM_STATUS_SCHEDULE_RUN;
+ snd_pcm_trigger_done(s, subs);
+ }
+ tasklet_hi_schedule(&chip->mgr->trigger_taskq);
+ } else {
+ stream = subs->runtime->private_data;
snd_printdd("Only one Substream %c %d\n",
stream->pipe->is_capture ? 'C' : 'P',
stream->pipe->first_audio);
@@ -665,15 +665,11 @@
if (pcxhr_set_stream_state(stream))
return -EINVAL;
stream->status = PCXHR_STREAM_STATUS_RUNNING;
- } else {
- struct snd_pcxhr *chip = snd_pcm_substream_chip(subs);
- tasklet_hi_schedule(&chip->mgr->trigger_taskq);
}
break;
case SNDRV_PCM_TRIGGER_STOP:
snd_printdd("SNDRV_PCM_TRIGGER_STOP\n");
- snd_pcm_group_for_each(pos, subs) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, subs) {
stream = s->runtime->private_data;
stream->status = PCXHR_STREAM_STATUS_SCHEDULE_STOP;
if (pcxhr_set_stream_state(stream))
diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c
index 369c19f..d55d8bc 100644
--- a/sound/pci/pcxhr/pcxhr_hwdep.c
+++ b/sound/pci/pcxhr/pcxhr_hwdep.c
@@ -356,6 +356,12 @@
return 0;
}
+MODULE_FIRMWARE("pcxhr/xi_1_882.dat");
+MODULE_FIRMWARE("pcxhr/xc_1_882.dat");
+MODULE_FIRMWARE("pcxhr/e321_512.e56");
+MODULE_FIRMWARE("pcxhr/b321_512.b56");
+MODULE_FIRMWARE("pcxhr/d321_512.d56");
+
#else /* old style firmware loading */
/* pcxhr hwdep interface id string */
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 952625d..8e54104 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -117,6 +117,7 @@
MODULE_DESCRIPTION("riptide");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Conexant,Riptide}}");
+MODULE_FIRMWARE("riptide.hex");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index 6bb7ac6..618653e 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -1078,12 +1078,10 @@
snd_rme32_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct rme32 *rme32 = snd_pcm_substream_chip(substream);
- struct list_head *pos;
struct snd_pcm_substream *s;
spin_lock(&rme32->lock);
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s != rme32->playback_substream &&
s != rme32->capture_substream)
continue;
@@ -1110,8 +1108,7 @@
/* prefill playback buffer */
if (cmd == SNDRV_PCM_TRIGGER_START && rme32->fullduplex_mode) {
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == rme32->playback_substream) {
s->ops->ack(s);
break;
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 89b3c7f..3b3ef65 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -60,6 +60,12 @@
MODULE_SUPPORTED_DEVICE("{{RME Hammerfall-DSP},"
"{RME HDSP-9652},"
"{RME HDSP-9632}}");
+#ifdef HDSP_FW_LOADER
+MODULE_FIRMWARE("multiface_firmware.bin");
+MODULE_FIRMWARE("multiface_firmware_rev11.bin");
+MODULE_FIRMWARE("digiface_firmware.bin");
+MODULE_FIRMWARE("digiface_firmware_rev11.bin");
+#endif
#define HDSP_MAX_CHANNELS 26
#define HDSP_MAX_DS_CHANNELS 14
@@ -275,6 +281,11 @@
#define HDSP_Frequency128KHz (HDSP_QuadSpeed|HDSP_DoubleSpeed|HDSP_Frequency0)
#define HDSP_Frequency176_4KHz (HDSP_QuadSpeed|HDSP_DoubleSpeed|HDSP_Frequency1)
#define HDSP_Frequency192KHz (HDSP_QuadSpeed|HDSP_DoubleSpeed|HDSP_Frequency1|HDSP_Frequency0)
+/* RME says n = 104857600000000, but in the windows MADI driver, I see:
+ return 104857600000000 / rate; // 100 MHz
+ return 110100480000000 / rate; // 105 MHz
+*/
+#define DDS_NUMERATOR 104857600000000ULL; /* = 2^20 * 10^8 */
#define hdsp_encode_latency(x) (((x)<<1) & HDSP_LatencyMask)
#define hdsp_decode_latency(x) (((x) & HDSP_LatencyMask)>>1)
@@ -1001,11 +1012,7 @@
else if (rate >= 56000)
rate /= 2;
- /* RME says n = 104857600000000, but in the windows MADI driver, I see:
-// return 104857600000000 / rate; // 100 MHz
- return 110100480000000 / rate; // 105 MHz
- */
- n = 104857600000000ULL; /* = 2^20 * 10^8 */
+ n = DDS_NUMERATOR;
div64_32(&n, rate, &r);
/* n should be less than 2^32 for being written to FREQ register */
snd_assert((n >> 32) == 0);
@@ -3085,11 +3092,83 @@
return 0;
}
+#define HDSP_DDS_OFFSET(xname, xindex) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdsp_info_dds_offset, \
+ .get = snd_hdsp_get_dds_offset, \
+ .put = snd_hdsp_put_dds_offset \
+}
+
+static int hdsp_dds_offset(struct hdsp *hdsp)
+{
+ u64 n;
+ u32 r;
+ unsigned int dds_value = hdsp->dds_value;
+ int system_sample_rate = hdsp->system_sample_rate;
+
+ n = DDS_NUMERATOR;
+ /*
+ * dds_value = n / rate
+ * rate = n / dds_value
+ */
+ div64_32(&n, dds_value, &r);
+ if (system_sample_rate >= 112000)
+ n *= 4;
+ else if (system_sample_rate >= 56000)
+ n *= 2;
+ return ((int)n) - system_sample_rate;
+}
+
+static int hdsp_set_dds_offset(struct hdsp *hdsp, int offset_hz)
+{
+ int rate = hdsp->system_sample_rate + offset_hz;
+ hdsp_set_dds_value(hdsp, rate);
+ return 0;
+}
+
+static int snd_hdsp_info_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -5000;
+ uinfo->value.integer.max = 5000;
+ return 0;
+}
+
+static int snd_hdsp_get_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct hdsp *hdsp = snd_kcontrol_chip(kcontrol);
+
+ ucontrol->value.enumerated.item[0] = hdsp_dds_offset(hdsp);
+ return 0;
+}
+
+static int snd_hdsp_put_dds_offset(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct hdsp *hdsp = snd_kcontrol_chip(kcontrol);
+ int change;
+ int val;
+
+ if (!snd_hdsp_use_is_exclusive(hdsp))
+ return -EBUSY;
+ val = ucontrol->value.enumerated.item[0];
+ spin_lock_irq(&hdsp->lock);
+ if (val != hdsp_dds_offset(hdsp))
+ change = (hdsp_set_dds_offset(hdsp, val) == 0) ? 1 : 0;
+ else
+ change = 0;
+ spin_unlock_irq(&hdsp->lock);
+ return change;
+}
+
static struct snd_kcontrol_new snd_hdsp_9632_controls[] = {
HDSP_DA_GAIN("DA Gain", 0),
HDSP_AD_GAIN("AD Gain", 0),
HDSP_PHONE_GAIN("Phones Gain", 0),
-HDSP_XLR_BREAKOUT_CABLE("XLR Breakout Cable", 0)
+HDSP_XLR_BREAKOUT_CABLE("XLR Breakout Cable", 0),
+HDSP_DDS_OFFSET("DDS Sample Rate Offset", 0)
};
static struct snd_kcontrol_new snd_hdsp_controls[] = {
@@ -3780,11 +3859,9 @@
else
runtime->status->hw_ptr = 0;
if (other) {
- struct list_head *pos;
struct snd_pcm_substream *s;
struct snd_pcm_runtime *oruntime = other->runtime;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == other) {
oruntime->status->hw_ptr = runtime->status->hw_ptr;
break;
@@ -3933,10 +4010,8 @@
other = hdsp->playback_substream;
if (other) {
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == other) {
snd_pcm_trigger_done(s, substream);
if (cmd == SNDRV_PCM_TRIGGER_START)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 6e95857..143185e 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -91,8 +91,10 @@
#define HDSPM_controlRegister 64
#define HDSPM_interruptConfirmation 96
#define HDSPM_control2Reg 256 /* not in specs ???????? */
+#define HDSPM_freqReg 256 /* for AES32 */
#define HDSPM_midiDataOut0 352 /* just believe in old code */
#define HDSPM_midiDataOut1 356
+#define HDSPM_eeprom_wr 384 /* for AES32 */
/* DMA enable for 64 channels, only Bit 0 is relevant */
#define HDSPM_outputEnableBase 512 /* 512-767 input DMA */
@@ -389,9 +391,8 @@
size is the same regardless of the number of channels, and
also the latency to use.
for one direction !!!
- => need to mupltiply by 2!!
*/
-#define HDSPM_DMA_AREA_BYTES (2 * HDSPM_MAX_CHANNELS * HDSPM_CHANNEL_BUFFER_BYTES)
+#define HDSPM_DMA_AREA_BYTES (HDSPM_MAX_CHANNELS * HDSPM_CHANNEL_BUFFER_BYTES)
#define HDSPM_DMA_AREA_KILOBYTES (HDSPM_DMA_AREA_BYTES/1024)
/* revisions >= 230 indicate AES32 card */
@@ -484,28 +485,6 @@
56, 57, 58, 59, 60, 61, 62, 63
};
-static char channel_map_madi_ds[HDSPM_MAX_CHANNELS] = {
- 0, 2, 4, 6, 8, 10, 12, 14,
- 16, 18, 20, 22, 24, 26, 28, 30,
- 32, 34, 36, 38, 40, 42, 44, 46,
- 48, 50, 52, 54, 56, 58, 60, 62,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1
-};
-
-static char channel_map_madi_qs[HDSPM_MAX_CHANNELS] = {
- 0, 4, 8, 12, 16, 20, 24, 28,
- 32, 36, 40, 44, 48, 52, 56, 60
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1
-};
-
static struct pci_device_id snd_hdspm_ids[] __devinitdata = {
{
@@ -818,6 +797,27 @@
return 0;
}
+static void hdspm_set_dds_value(struct hdspm *hdspm, int rate)
+{
+ u64 n;
+ u32 r;
+
+ if (rate >= 112000)
+ rate /= 4;
+ else if (rate >= 56000)
+ rate /= 2;
+
+ /* RME says n = 104857600000000, but in the windows MADI driver, I see:
+// return 104857600000000 / rate; // 100 MHz
+ return 110100480000000 / rate; // 105 MHz
+ */
+ //n = 104857600000000ULL; /* = 2^20 * 10^8 */
+ n = 110100480000000ULL; /* Value checked for AES32 and MADI */
+ div64_32(&n, rate, &r);
+ /* n should be less than 2^32 for being written to FREQ register */
+ snd_assert((n >> 32) == 0);
+ hdspm_write(hdspm, HDSPM_freqReg, (u32)n);
+}
/* dummy set rate lets see what happens */
static int hdspm_set_rate(struct hdspm * hdspm, int rate, int called_internally)
@@ -943,12 +943,16 @@
hdspm->control_register |= rate_bits;
hdspm_write(hdspm, HDSPM_controlRegister, hdspm->control_register);
- if (rate > 96000 /* 64000*/)
- hdspm->channel_map = channel_map_madi_qs;
- else if (rate > 48000)
- hdspm->channel_map = channel_map_madi_ds;
- else
- hdspm->channel_map = channel_map_madi_ss;
+ /* For AES32, need to set DDS value in FREQ register
+ For MADI, also apparently */
+ hdspm_set_dds_value(hdspm, rate);
+
+ if (hdspm->is_aes32 && rate != current_rate)
+ hdspm_write(hdspm, HDSPM_eeprom_wr, 0);
+
+ /* For AES32 and for MADI (at least rev 204), channel_map needs to
+ * always be channel_map_madi_ss, whatever the sample rate */
+ hdspm->channel_map = channel_map_madi_ss;
hdspm->system_sample_rate = rate;
@@ -3184,8 +3188,8 @@
hdspm_read(hdspm, HDSPM_midiStatusIn0) & 0xFF,
hdspm_read(hdspm, HDSPM_midiStatusIn1) & 0xFF);
snd_iprintf(buffer,
- "Register: ctrl1=0x%x, ctrl2=0x%x, status1=0x%x, status2=0x%x, timecode=0x%x\n",
- hdspm->control_register, hdspm->control2_register,
+ "Register: ctrl1=0x%x, status1=0x%x, status2=0x%x, timecode=0x%x\n",
+ hdspm->control_register,
status, status2, timecode);
snd_iprintf(buffer, "--- Settings ---\n");
@@ -3377,13 +3381,16 @@
hdspm_write(hdspm, HDSPM_controlRegister, hdspm->control_register);
+ if (!hdspm->is_aes32) {
+ /* No control2 register for AES32 */
#ifdef SNDRV_BIG_ENDIAN
- hdspm->control2_register = HDSPM_BIGENDIAN_MODE;
+ hdspm->control2_register = HDSPM_BIGENDIAN_MODE;
#else
- hdspm->control2_register = 0;
+ hdspm->control2_register = 0;
#endif
- hdspm_write(hdspm, HDSPM_control2Reg, hdspm->control2_register);
+ hdspm_write(hdspm, HDSPM_control2Reg, hdspm->control2_register);
+ }
hdspm_compute_period_size(hdspm);
/* silence everything */
@@ -3575,11 +3582,9 @@
else
runtime->status->hw_ptr = 0;
if (other) {
- struct list_head *pos;
struct snd_pcm_substream *s;
struct snd_pcm_runtime *oruntime = other->runtime;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == other) {
oruntime->status->hw_ptr =
runtime->status->hw_ptr;
@@ -3658,11 +3663,10 @@
/* Memory allocation, takashi's method, dont know if we should spinlock */
/* malloc all buffer even if not enabled to get sure */
- /* malloc only needed bytes */
+ /* Update for MADI rev 204: we need to allocate for all channels,
+ * otherwise it doesn't work at 96kHz */
err =
- snd_pcm_lib_malloc_pages(substream,
- HDSPM_CHANNEL_BUFFER_BYTES *
- params_channels(params));
+ snd_pcm_lib_malloc_pages(substream, HDSPM_DMA_AREA_BYTES);
if (err < 0)
return err;
@@ -3698,6 +3702,13 @@
"playback" : "capture",
snd_pcm_sgbuf_get_addr(sgbuf, 0));
*/
+ /*
+ snd_printdd("set_hwparams: %s %d Hz, %d channels, bs = %d\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ "playback" : "capture",
+ params_rate(params), params_channels(params),
+ params_buffer_size(params));
+ */
return 0;
}
@@ -3791,10 +3802,8 @@
other = hdspm->playback_substream;
if (other) {
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == other) {
snd_pcm_trigger_done(s, substream);
if (cmd == SNDRV_PCM_TRIGGER_START)
@@ -3904,16 +3913,16 @@
struct snd_interval *r =
hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
- if (r->min > 48000) {
+ if (r->min > 48000 && r->max <= 96000) {
struct snd_interval t = {
- .min = 1,
+ .min = hdspm->ds_channels,
.max = hdspm->ds_channels,
.integer = 1,
};
return snd_interval_refine(c, &t);
} else if (r->max < 64000) {
struct snd_interval t = {
- .min = 1,
+ .min = hdspm->ss_channels,
.max = hdspm->ss_channels,
.integer = 1,
};
@@ -3931,14 +3940,14 @@
struct snd_interval *r =
hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
- if (c->min <= hdspm->ss_channels) {
+ if (c->min >= hdspm->ss_channels) {
struct snd_interval t = {
.min = 32000,
.max = 48000,
.integer = 1,
};
return snd_interval_refine(r, &t);
- } else if (c->max > hdspm->ss_channels) {
+ } else if (c->max <= hdspm->ds_channels) {
struct snd_interval t = {
.min = 64000,
.max = 96000,
@@ -3950,13 +3959,39 @@
return 0;
}
+static int snd_hdspm_hw_rule_channels(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ unsigned int list[3];
+ struct hdspm *hdspm = rule->private;
+ struct snd_interval *c = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ if (hdspm->is_aes32) {
+ list[0] = hdspm->qs_channels;
+ list[1] = hdspm->ds_channels;
+ list[2] = hdspm->ss_channels;
+ return snd_interval_list(c, 3, list, 0);
+ } else {
+ list[0] = hdspm->ds_channels;
+ list[1] = hdspm->ss_channels;
+ return snd_interval_list(c, 2, list, 0);
+ }
+}
+
+
+static unsigned int hdspm_aes32_sample_rates[] = { 32000, 44100, 48000, 64000, 88200, 96000, 128000, 176400, 192000 };
+
+static struct snd_pcm_hw_constraint_list hdspm_hw_constraints_aes32_sample_rates = {
+ .count = ARRAY_SIZE(hdspm_aes32_sample_rates),
+ .list = hdspm_aes32_sample_rates,
+ .mask = 0
+};
+
static int snd_hdspm_playback_open(struct snd_pcm_substream *substream)
{
struct hdspm *hdspm = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
- snd_printdd("Open device substream %d\n", substream->stream);
-
spin_lock_irq(&hdspm->lock);
snd_pcm_set_sync(substream);
@@ -3977,14 +4012,21 @@
SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
&hw_constraints_period_sizes);
- snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
- snd_hdspm_hw_rule_channels_rate, hdspm,
- SNDRV_PCM_HW_PARAM_RATE, -1);
+ if (hdspm->is_aes32) {
+ snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+ &hdspm_hw_constraints_aes32_sample_rates);
+ } else {
+ snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd_hdspm_hw_rule_channels, hdspm,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd_hdspm_hw_rule_channels_rate, hdspm,
+ SNDRV_PCM_HW_PARAM_RATE, -1);
- snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
- snd_hdspm_hw_rule_rate_channels, hdspm,
- SNDRV_PCM_HW_PARAM_CHANNELS, -1);
-
+ snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+ snd_hdspm_hw_rule_rate_channels, hdspm,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ }
return 0;
}
@@ -4024,14 +4066,21 @@
snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
&hw_constraints_period_sizes);
+ if (hdspm->is_aes32) {
+ snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+ &hdspm_hw_constraints_aes32_sample_rates);
+ } else {
+ snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd_hdspm_hw_rule_channels, hdspm,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
+ snd_hdspm_hw_rule_channels_rate, hdspm,
+ SNDRV_PCM_HW_PARAM_RATE, -1);
- snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
- snd_hdspm_hw_rule_channels_rate, hdspm,
- SNDRV_PCM_HW_PARAM_RATE, -1);
-
- snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
- snd_hdspm_hw_rule_rate_channels, hdspm,
- SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+ snd_hdspm_hw_rule_rate_channels, hdspm,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ }
return 0;
}
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index cc3bdec..bd7dbd2 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -1992,11 +1992,9 @@
else
runtime->status->hw_ptr = 0;
if (other) {
- struct list_head *pos;
struct snd_pcm_substream *s;
struct snd_pcm_runtime *oruntime = other->runtime;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == other) {
oruntime->status->hw_ptr = runtime->status->hw_ptr;
break;
@@ -2140,10 +2138,8 @@
other = rme9652->playback_substream;
if (other) {
- struct list_head *pos;
struct snd_pcm_substream *s;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == other) {
snd_pcm_trigger_done(s, substream);
if (cmd == SNDRV_PCM_TRIGGER_START)
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index 3bff321..7ca6062 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -1540,7 +1540,6 @@
{
struct snd_trident *trident = snd_pcm_substream_chip(substream);
- struct list_head *pos;
struct snd_pcm_substream *s;
unsigned int what, whati, capture_flag, spdif_flag;
struct snd_trident_voice *voice, *evoice;
@@ -1563,8 +1562,7 @@
what = whati = capture_flag = spdif_flag = 0;
spin_lock(&trident->reg_lock);
val = inl(TRID_REG(trident, T4D_STIMER)) & 0x00ffffff;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if ((struct snd_trident *) snd_pcm_substream_chip(s) == trident) {
voice = s->runtime->private_data;
evoice = voice->extra;
diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index fd12674..ea861bc 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -1998,9 +1998,7 @@
}
}
-#define FIRMWARE_IN_THE_KERNEL
-
-#ifdef FIRMWARE_IN_THE_KERNEL
+#ifdef CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL
#include "ymfpci_image.h"
@@ -2018,6 +2016,24 @@
};
#endif
+#ifdef CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL
+static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
+{
+ chip->dsp_microcode = &snd_ymfpci_dsp_microcode;
+ if (chip->device_id == PCI_DEVICE_ID_YAMAHA_724F ||
+ chip->device_id == PCI_DEVICE_ID_YAMAHA_740C ||
+ chip->device_id == PCI_DEVICE_ID_YAMAHA_744 ||
+ chip->device_id == PCI_DEVICE_ID_YAMAHA_754)
+ chip->controller_microcode =
+ &snd_ymfpci_controller_1e_microcode;
+ else
+ chip->controller_microcode =
+ &snd_ymfpci_controller_microcode;
+ return 0;
+}
+
+#else /* use fw_loader */
+
#ifdef __LITTLE_ENDIAN
static inline void snd_ymfpci_convert_from_le(const struct firmware *fw) { }
#else
@@ -2046,13 +2062,8 @@
err = -EINVAL;
}
}
- if (err < 0) {
-#ifdef FIRMWARE_IN_THE_KERNEL
- chip->dsp_microcode = &snd_ymfpci_dsp_microcode;
-#else
+ if (err < 0)
return err;
-#endif
- }
is_1e = chip->device_id == PCI_DEVICE_ID_YAMAHA_724F ||
chip->device_id == PCI_DEVICE_ID_YAMAHA_740C ||
chip->device_id == PCI_DEVICE_ID_YAMAHA_744 ||
@@ -2069,18 +2080,17 @@
err = -EINVAL;
}
}
- if (err < 0) {
-#ifdef FIRMWARE_IN_THE_KERNEL
- chip->controller_microcode =
- is_1e ? &snd_ymfpci_controller_1e_microcode
- : &snd_ymfpci_controller_microcode;
-#else
+ if (err < 0)
return err;
-#endif
- }
return 0;
}
+MODULE_FIRMWARE("yamaha/ds1_dsp.fw");
+MODULE_FIRMWARE("yamaha/ds1_ctrl.fw");
+MODULE_FIRMWARE("yamaha/ds1e_ctrl.fw");
+
+#endif
+
static void snd_ymfpci_download_image(struct snd_ymfpci *chip)
{
int i;
@@ -2259,15 +2269,10 @@
pci_write_config_word(chip->pci, 0x40, chip->old_legacy_ctrl);
pci_disable_device(chip->pci);
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (chip->dsp_microcode != &snd_ymfpci_dsp_microcode)
+#ifndef CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL
+ release_firmware(chip->dsp_microcode);
+ release_firmware(chip->controller_microcode);
#endif
- release_firmware(chip->dsp_microcode);
-#ifdef FIRMWARE_IN_THE_KERNEL
- if (chip->controller_microcode != &snd_ymfpci_controller_microcode &&
- chip->controller_microcode != &snd_ymfpci_controller_1e_microcode)
-#endif
- release_firmware(chip->controller_microcode);
kfree(chip);
return 0;
}
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 363bcb5..c57e127 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -297,7 +297,7 @@
/* find an empty slot from the card list */
for (i = 0; i < SNDRV_CARDS; i++) {
- if (! card_alloc & (1 << i))
+ if (!(card_alloc & (1 << i)))
break;
}
if (i >= SNDRV_CARDS) {
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index dccaa4b..10cffc0 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -2,31 +2,31 @@
# SoC audio configuration
#
-menu "SoC audio support"
+menu "System on Chip audio support"
depends on SND!=n
config SND_SOC_AC97_BUS
bool
config SND_SOC
- tristate "SoC audio support"
+ tristate "ALSA for SoC audio support"
depends on SND
select SND_PCM
---help---
- If you want SoC support, you should say Y here and also to the
- specific driver for your SoC below. You will also need to select the
- specific codec(s) attached to the SoC
+ If you want ASoC support, you should say Y here and also to the
+ specific driver for your SoC platform below.
+
+ ASoC provides power efficient ALSA support for embedded battery powered
+ SoC based systems like PDA's, Phones and Personal Media Players.
- This SoC audio support can also be built as a module. If so, the module
+ This ASoC audio support can also be built as a module. If so, the module
will be called snd-soc-core.
# All the supported Soc's
-menu "SoC Platforms"
-depends on SND_SOC
source "sound/soc/at91/Kconfig"
source "sound/soc/pxa/Kconfig"
-endmenu
+source "sound/soc/s3c24xx/Kconfig"
# Supported codecs
source "sound/soc/codecs/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 98e6f49..0ae2e49 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -1,4 +1,4 @@
snd-soc-core-objs := soc-core.o soc-dapm.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
-obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/
+obj-$(CONFIG_SND_SOC) += codecs/ at91/ pxa/ s3c24xx/
diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig
index a5b2558..5cb93fd 100644
--- a/sound/soc/at91/Kconfig
+++ b/sound/soc/at91/Kconfig
@@ -1,5 +1,3 @@
-menu "SoC Audio for the Atmel AT91"
-
config SND_AT91_SOC
tristate "SoC Audio for the Atmel AT91 System-on-Chip"
depends on ARCH_AT91 && SND_SOC
@@ -8,13 +6,13 @@
the AT91 SSC interface. You will also need
to select the audio interfaces to support below.
-config SND_AT91_SOC_I2S
+config SND_AT91_SOC_SSC
tristate
config SND_AT91_SOC_ETI_B1_WM8731
- tristate "SoC I2S Audio support for WM8731-based Endrelia ETI-B1 boards"
+ tristate "SoC Audio support for WM8731-based Endrelia ETI-B1 boards"
depends on SND_AT91_SOC && (MACH_ETI_B1 || MACH_ETI_C1)
- select SND_AT91_SOC_I2S
+ select SND_AT91_SOC_SSC
select SND_SOC_WM8731
help
Say Y if you want to add support for SoC audio on WM8731-based
@@ -27,5 +25,3 @@
help
Say Y if you want to run with the AT91 SSC generating the BCLK
and LRC signals on Endrelia boards.
-
-endmenu
diff --git a/sound/soc/at91/Makefile b/sound/soc/at91/Makefile
index b77b01a..f23da17 100644
--- a/sound/soc/at91/Makefile
+++ b/sound/soc/at91/Makefile
@@ -1,9 +1,9 @@
# AT91 Platform Support
snd-soc-at91-objs := at91-pcm.o
-snd-soc-at91-i2s-objs := at91-i2s.o
+snd-soc-at91-ssc-objs := at91-ssc.o
obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o
-obj-$(CONFIG_SND_AT91_SOC_I2S) += snd-soc-at91-i2s.o
+obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o
# AT91 Machine Support
snd-soc-eti-b1-wm8731-objs := eti_b1_wm8731.o
diff --git a/sound/soc/at91/at91-i2s.c b/sound/soc/at91/at91-ssc.c
similarity index 72%
rename from sound/soc/at91/at91-i2s.c
rename to sound/soc/at91/at91-ssc.c
index 9fc0c03..3d4e32c 100644
--- a/sound/soc/at91/at91-i2s.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -1,5 +1,5 @@
/*
- * at91-i2s.c -- ALSA SoC I2S Audio Layer Platform driver
+ * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver
*
* Author: Frank Mandarino <fmandarino@endrelia.com>
* Endrelia Technologies Inc.
@@ -25,6 +25,7 @@
#include <sound/driver.h>
#include <sound/core.h>
#include <sound/pcm.h>
+#include <sound/pcm_params.h>
#include <sound/initval.h>
#include <sound/soc.h>
@@ -33,10 +34,10 @@
#include <asm/arch/at91_ssc.h>
#include "at91-pcm.h"
-#include "at91-i2s.h"
+#include "at91-ssc.h"
#if 0
-#define DBG(x...) printk(KERN_DEBUG "at91-i2s:" x)
+#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x)
#else
#define DBG(x...)
#endif
@@ -92,33 +93,33 @@
*/
static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
{{
- .name = "SSC0/I2S PCM Stereo out",
+ .name = "SSC0 PCM out",
.pdc = &pdc_tx_reg,
.mask = &ssc_tx_mask,
},
{
- .name = "SSC0/I2S PCM Stereo in",
+ .name = "SSC0 PCM in",
.pdc = &pdc_rx_reg,
.mask = &ssc_rx_mask,
}},
#if NUM_SSC_DEVICES == 3
{{
- .name = "SSC1/I2S PCM Stereo out",
+ .name = "SSC1 PCM out",
.pdc = &pdc_tx_reg,
.mask = &ssc_tx_mask,
},
{
- .name = "SSC1/I2S PCM Stereo in",
+ .name = "SSC1 PCM in",
.pdc = &pdc_rx_reg,
.mask = &ssc_rx_mask,
}},
{{
- .name = "SSC2/I2S PCM Stereo out",
+ .name = "SSC2 PCM out",
.pdc = &pdc_tx_reg,
.mask = &ssc_tx_mask,
},
{
- .name = "SSC1/I2S PCM Stereo in",
+ .name = "SSC2 PCM in",
.pdc = &pdc_rx_reg,
.mask = &ssc_rx_mask,
}},
@@ -151,33 +152,33 @@
} ssc_info[NUM_SSC_DEVICES] = {
{
.name = "ssc0",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
.dir_mask = 0,
.initialized = 0,
},
#if NUM_SSC_DEVICES == 3
{
.name = "ssc1",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
.dir_mask = 0,
.initialized = 0,
},
{
.name = "ssc2",
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
.dir_mask = 0,
.initialized = 0,
},
#endif
};
-static unsigned int at91_i2s_sysclk;
+static unsigned int at91_ssc_sysclk;
/*
* SSC interrupt handler. Passes PDC interrupts to the DMA
* interrupt handler in the PCM driver.
*/
-static irqreturn_t at91_i2s_interrupt(int irq, void *dev_id)
+static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id)
{
struct at91_ssc_info *ssc_p = dev_id;
struct at91_pcm_dma_params *dma_params;
@@ -209,13 +210,13 @@
/*
* Startup. Only that one substream allowed in each direction.
*/
-static int at91_i2s_startup(struct snd_pcm_substream *substream)
+static int at91_ssc_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
int dir_mask;
- DBG("i2s_startup: SSC_SR=0x%08lx\n",
+ DBG("ssc_startup: SSC_SR=0x%08lx\n",
at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR));
dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2;
@@ -234,7 +235,7 @@
* Shutdown. Clear DMA parameters and shutdown the SSC if there
* are no other substreams open.
*/
-static void at91_i2s_shutdown(struct snd_pcm_substream *substream)
+static void at91_ssc_shutdown(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
@@ -281,7 +282,7 @@
/*
* Record the SSC system clock rate.
*/
-static int at91_i2s_set_dai_sysclk(struct snd_soc_cpu_dai *cpu_dai,
+static int at91_ssc_set_dai_sysclk(struct snd_soc_cpu_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
/*
@@ -291,7 +292,7 @@
*/
switch (clk_id) {
case AT91_SYSCLK_MCK:
- at91_i2s_sysclk = freq;
+ at91_ssc_sysclk = freq;
break;
default:
return -EINVAL;
@@ -303,14 +304,11 @@
/*
* Record the DAI format for use in hw_params().
*/
-static int at91_i2s_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai,
+static int at91_ssc_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai,
unsigned int fmt)
{
struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
- if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S)
- return -EINVAL;
-
ssc_p->daifmt = fmt;
return 0;
}
@@ -318,7 +316,7 @@
/*
* Record SSC clock dividers for use in hw_params().
*/
-static int at91_i2s_set_dai_clkdiv(struct snd_soc_cpu_dai *cpu_dai,
+static int at91_ssc_set_dai_clkdiv(struct snd_soc_cpu_dai *cpu_dai,
int div_id, int div)
{
struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
@@ -355,7 +353,7 @@
/*
* Configure the SSC.
*/
-static int at91_i2s_hw_params(struct snd_pcm_substream *substream,
+static int at91_ssc_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
@@ -391,20 +389,50 @@
channels = params_channels(params);
/*
- * The SSC only supports up to 16-bit samples in I2S format, due
- * to the size of the Frame Mode Register FSLEN field. Also, I2S
- * implies signed data.
+ * Determine sample size in bits and the PDC increment.
*/
- bits = 16;
- dma_params->pdc_xfer_size = 2;
+ switch(params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "at91-ssc: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * The SSC only supports up to 16-bit samples in I2S format, due
+ * to the size of the Frame Mode Register FSLEN field.
+ */
+ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
+ && bits > 16) {
+ printk(KERN_WARNING
+ "at91-ssc: sample size %d is too large for I2S\n", bits);
+ return -EINVAL;
+ }
/*
* Compute SSC register settings.
*/
- switch (ssc_p->daifmt) {
- case SND_SOC_DAIFMT_CBS_CFS:
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
/*
- * SSC provides BCLK and LRC clocks.
+ * I2S format, SSC provides BCLK and LRC clocks.
*
* The SSC transmit and receive clocks are generated from the
* MCK divider, and the BCLK signal is output on the SSC TK line.
@@ -441,10 +469,9 @@
| (((bits - 1) << 0) & AT91_SSC_DATALEN);
break;
- case SND_SOC_DAIFMT_CBM_CFM:
-
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
/*
- * CODEC supplies BCLK and LRC clocks.
+ * I2S format, CODEC supplies BCLK and LRC clocks.
*
* The SSC transmit clock is obtained from the BCLK signal on
* on the TK line, and the SSC receive clock is generated from the
@@ -490,10 +517,51 @@
| (((bits - 1) << 0) & AT91_SSC_DATALEN);
break;
- case SND_SOC_DAIFMT_CBS_CFM:
- case SND_SOC_DAIFMT_CBM_CFS:
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output on the SSC TK line.
+ */
+ rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD)
+ | (( 1 << 16) & AT91_SSC_STTDLY)
+ | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START)
+ | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
+ | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
+ | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
+
+ rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
+ | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS)
+ | (( 0 << 16) & AT91_SSC_FSLEN)
+ | (((channels - 1) << 8) & AT91_SSC_DATNB)
+ | (( 1 << 7) & AT91_SSC_MSBF)
+ | (( 0 << 5) & AT91_SSC_LOOP)
+ | (((bits - 1) << 0) & AT91_SSC_DATALEN);
+
+ tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD)
+ | (( 1 << 16) & AT91_SSC_STTDLY)
+ | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START)
+ | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
+ | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO)
+ | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
+
+ tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
+ | (( 0 << 23) & AT91_SSC_FSDEN)
+ | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS)
+ | (( 0 << 16) & AT91_SSC_FSLEN)
+ | (((channels - 1) << 8) & AT91_SSC_DATNB)
+ | (( 1 << 7) & AT91_SSC_MSBF)
+ | (( 0 << 5) & AT91_SSC_DATDEF)
+ | (((bits - 1) << 0) & AT91_SSC_DATALEN);
+
+
+
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
default:
- printk(KERN_WARNING "at91-i2s: unsupported DAI format 0x%x.\n",
+ printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n",
ssc_p->daifmt);
return -EINVAL;
break;
@@ -518,9 +586,9 @@
at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0);
at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0);
- if ((ret = request_irq(ssc_p->ssc.pid, at91_i2s_interrupt,
+ if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt,
0, ssc_p->name, ssc_p)) < 0) {
- printk(KERN_WARNING "at91-i2s: request_irq failure\n");
+ printk(KERN_WARNING "at91-ssc: request_irq failure\n");
DBG("Stopping pid %d clock\n", ssc_p->ssc.pid);
at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid);
@@ -546,7 +614,7 @@
}
-static int at91_i2s_prepare(struct snd_pcm_substream *substream)
+static int at91_ssc_prepare(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
@@ -566,7 +634,7 @@
#ifdef CONFIG_PM
-static int at91_i2s_suspend(struct platform_device *pdev,
+static int at91_ssc_suspend(struct platform_device *pdev,
struct snd_soc_cpu_dai *cpu_dai)
{
struct at91_ssc_info *ssc_p;
@@ -594,7 +662,7 @@
return 0;
}
-static int at91_i2s_resume(struct platform_device *pdev,
+static int at91_ssc_resume(struct platform_device *pdev,
struct snd_soc_cpu_dai *cpu_dai)
{
struct at91_ssc_info *ssc_p;
@@ -620,102 +688,105 @@
}
#else
-#define at91_i2s_suspend NULL
-#define at91_i2s_resume NULL
+#define at91_ssc_suspend NULL
+#define at91_ssc_resume NULL
#endif
-#define AT91_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
SNDRV_PCM_RATE_96000)
-struct snd_soc_cpu_dai at91_i2s_dai[NUM_SSC_DEVICES] = {
- { .name = "at91_ssc0/i2s",
+#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_cpu_dai at91_ssc_dai[NUM_SSC_DEVICES] = {
+ { .name = "at91-ssc0",
.id = 0,
- .type = SND_SOC_DAI_I2S,
- .suspend = at91_i2s_suspend,
- .resume = at91_i2s_resume,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = at91_ssc_suspend,
+ .resume = at91_ssc_resume,
.playback = {
.channels_min = 1,
.channels_max = 2,
- .rates = AT91_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .rates = AT91_SSC_RATES,
+ .formats = AT91_SSC_FORMATS,},
.capture = {
.channels_min = 1,
.channels_max = 2,
- .rates = AT91_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .rates = AT91_SSC_RATES,
+ .formats = AT91_SSC_FORMATS,},
.ops = {
- .startup = at91_i2s_startup,
- .shutdown = at91_i2s_shutdown,
- .prepare = at91_i2s_prepare,
- .hw_params = at91_i2s_hw_params,},
+ .startup = at91_ssc_startup,
+ .shutdown = at91_ssc_shutdown,
+ .prepare = at91_ssc_prepare,
+ .hw_params = at91_ssc_hw_params,},
.dai_ops = {
- .set_sysclk = at91_i2s_set_dai_sysclk,
- .set_fmt = at91_i2s_set_dai_fmt,
- .set_clkdiv = at91_i2s_set_dai_clkdiv,},
+ .set_sysclk = at91_ssc_set_dai_sysclk,
+ .set_fmt = at91_ssc_set_dai_fmt,
+ .set_clkdiv = at91_ssc_set_dai_clkdiv,},
.private_data = &ssc_info[0].ssc,
},
#if NUM_SSC_DEVICES == 3
- { .name = "at91_ssc1/i2s",
+ { .name = "at91-ssc1",
.id = 1,
- .type = SND_SOC_DAI_I2S,
- .suspend = at91_i2s_suspend,
- .resume = at91_i2s_resume,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = at91_ssc_suspend,
+ .resume = at91_ssc_resume,
.playback = {
.channels_min = 1,
.channels_max = 2,
- .rates = AT91_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .rates = AT91_SSC_RATES,
+ .formats = AT91_SSC_FORMATS,},
.capture = {
.channels_min = 1,
.channels_max = 2,
- .rates = AT91_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .rates = AT91_SSC_RATES,
+ .formats = AT91_SSC_FORMATS,},
.ops = {
- .startup = at91_i2s_startup,
- .shutdown = at91_i2s_shutdown,
- .prepare = at91_i2s_prepare,
- .hw_params = at91_i2s_hw_params,},
+ .startup = at91_ssc_startup,
+ .shutdown = at91_ssc_shutdown,
+ .prepare = at91_ssc_prepare,
+ .hw_params = at91_ssc_hw_params,},
.dai_ops = {
- .set_sysclk = at91_i2s_set_dai_sysclk,
- .set_fmt = at91_i2s_set_dai_fmt,
- .set_clkdiv = at91_i2s_set_dai_clkdiv,},
+ .set_sysclk = at91_ssc_set_dai_sysclk,
+ .set_fmt = at91_ssc_set_dai_fmt,
+ .set_clkdiv = at91_ssc_set_dai_clkdiv,},
.private_data = &ssc_info[1].ssc,
},
- { .name = "at91_ssc2/i2s",
+ { .name = "at91-ssc2",
.id = 2,
- .type = SND_SOC_DAI_I2S,
- .suspend = at91_i2s_suspend,
- .resume = at91_i2s_resume,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = at91_ssc_suspend,
+ .resume = at91_ssc_resume,
.playback = {
.channels_min = 1,
.channels_max = 2,
- .rates = AT91_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .rates = AT91_SSC_RATES,
+ .formats = AT91_SSC_FORMATS,},
.capture = {
.channels_min = 1,
.channels_max = 2,
- .rates = AT91_I2S_RATES,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .rates = AT91_SSC_RATES,
+ .formats = AT91_SSC_FORMATS,},
.ops = {
- .startup = at91_i2s_startup,
- .shutdown = at91_i2s_shutdown,
- .prepare = at91_i2s_prepare,
- .hw_params = at91_i2s_hw_params,},
+ .startup = at91_ssc_startup,
+ .shutdown = at91_ssc_shutdown,
+ .prepare = at91_ssc_prepare,
+ .hw_params = at91_ssc_hw_params,},
.dai_ops = {
- .set_sysclk = at91_i2s_set_dai_sysclk,
- .set_fmt = at91_i2s_set_dai_fmt,
- .set_clkdiv = at91_i2s_set_dai_clkdiv,},
+ .set_sysclk = at91_ssc_set_dai_sysclk,
+ .set_fmt = at91_ssc_set_dai_fmt,
+ .set_clkdiv = at91_ssc_set_dai_clkdiv,},
.private_data = &ssc_info[2].ssc,
},
#endif
};
-EXPORT_SYMBOL_GPL(at91_i2s_dai);
+EXPORT_SYMBOL_GPL(at91_ssc_dai);
/* Module information */
MODULE_AUTHOR("Frank Mandarino, fmandarino@endrelia.com, www.endrelia.com");
-MODULE_DESCRIPTION("AT91 I2S ASoC Interface");
+MODULE_DESCRIPTION("AT91 SSC ASoC Interface");
MODULE_LICENSE("GPL");
diff --git a/sound/soc/at91/at91-i2s.h b/sound/soc/at91/at91-ssc.h
similarity index 71%
rename from sound/soc/at91/at91-i2s.h
rename to sound/soc/at91/at91-ssc.h
index f8a875b..b188f97 100644
--- a/sound/soc/at91/at91-i2s.h
+++ b/sound/soc/at91/at91-ssc.h
@@ -1,5 +1,5 @@
/*
- * at91-i2s.h - ALSA I2S interface for the Atmel AT91 SoC
+ * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC
*
* Author: Frank Mandarino <fmandarino@endrelia.com>
* Endrelia Technologies Inc.
@@ -10,18 +10,18 @@
* published by the Free Software Foundation.
*/
-#ifndef _AT91_I2S_H
-#define _AT91_I2S_H
+#ifndef _AT91_SSC_H
+#define _AT91_SSC_H
-/* I2S system clock ids */
+/* SSC system clock ids */
#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
-/* I2S divider ids */
+/* SSC divider ids */
#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */
#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
-extern struct snd_soc_cpu_dai at91_i2s_dai[];
+extern struct snd_soc_cpu_dai at91_ssc_dai[];
-#endif /* _AT91_I2S_H */
+#endif /* _AT91_SSC_H */
diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c
index 8179df3..820a676 100644
--- a/sound/soc/at91/eti_b1_wm8731.c
+++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -40,7 +40,7 @@
#include "../codecs/wm8731.h"
#include "at91-pcm.h"
-#include "at91-i2s.h"
+#include "at91-ssc.h"
#if 0
#define DBG(x...) printk(KERN_INFO "eti_b1_wm8731: " x)
@@ -248,15 +248,15 @@
static struct snd_soc_dai_link eti_b1_dai = {
.name = "WM8731",
- .stream_name = "WM8731",
- .cpu_dai = &at91_i2s_dai[1],
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &at91_ssc_dai[1],
.codec_dai = &wm8731_dai,
.init = eti_b1_wm8731_init,
.ops = &eti_b1_ops,
};
static struct snd_soc_machine snd_soc_machine_eti_b1 = {
- .name = "ETI_B1",
+ .name = "ETI_B1_WM8731",
.dai_link = &eti_b1_dai,
.num_links = 1,
};
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ec2a278..e5fb437 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -10,6 +10,10 @@
tristate
depends on SND_SOC
+config SND_SOC_WM8753
+ tristate
+ depends on SND_SOC
+
config SND_SOC_WM9712
tristate
depends on SND_SOC
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 3249a6e..e39a747 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -1,9 +1,11 @@
snd-soc-ac97-objs := ac97.o
snd-soc-wm8731-objs := wm8731.o
snd-soc-wm8750-objs := wm8750.o
+snd-soc-wm8753-objs := wm8753.o
snd-soc-wm9712-objs := wm9712.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o
obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o
+obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c
index 55bc55e..0cdef97 100644
--- a/sound/soc/codecs/ac97.c
+++ b/sound/soc/codecs/ac97.c
@@ -60,6 +60,7 @@
.ops = {
.prepare = ac97_prepare,},
};
+EXPORT_SYMBOL_GPL(ac97_dai);
static unsigned int ac97_read(struct snd_soc_codec *codec,
unsigned int reg)
diff --git a/sound/soc/codecs/ac97.h b/sound/soc/codecs/ac97.h
index 930ddfc..2bf6d69 100644
--- a/sound/soc/codecs/ac97.h
+++ b/sound/soc/codecs/ac97.h
@@ -14,5 +14,6 @@
#define __LINUX_SND_SOC_AC97_H
extern struct snd_soc_codec_device soc_codec_dev_ac97;
+extern struct snd_soc_codec_dai ac97_dai;
#endif
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 7073e8e..28684ee 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -808,7 +808,7 @@
codec->dai = &wm8750_dai;
codec->num_dai = 1;
codec->reg_cache_size = sizeof(wm8750_reg);
- codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KRENEL);
+ codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KERNEL);
if (codec->reg_cache == NULL)
return -ENOMEM;
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
new file mode 100644
index 0000000..efced93
--- /dev/null
+++ b/sound/soc/codecs/wm8753.c
@@ -0,0 +1,1811 @@
+/*
+ * wm8753.c -- WM8753 ALSA Soc Audio driver
+ *
+ * Copyright 2003 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Notes:
+ * The WM8753 is a low power, high quality stereo codec with integrated PCM
+ * codec designed for portable digital telephony applications.
+ *
+ * Dual DAI:-
+ *
+ * This driver support 2 DAI PCM's. This makes the default PCM available for
+ * HiFi audio (e.g. MP3, ogg) playback/capture and the other PCM available for
+ * voice.
+ *
+ * Please note that the voice PCM can be connected directly to a Bluetooth
+ * codec or GSM modem and thus cannot be read or written to, although it is
+ * available to be configured with snd_hw_params(), etc and kcontrols in the
+ * normal alsa manner.
+ *
+ * Fast DAI switching:-
+ *
+ * The driver can now fast switch between the DAI configurations via a
+ * an alsa kcontrol. This allows the PCM to remain open.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <asm/div64.h>
+
+#include "wm8753.h"
+
+#define AUDIO_NAME "wm8753"
+#define WM8753_VERSION "0.16"
+
+/*
+ * Debug
+ */
+
+#define WM8753_DEBUG 0
+
+#ifdef WM8753_DEBUG
+#define dbg(format, arg...) \
+ printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg)
+#else
+#define dbg(format, arg...) do {} while (0)
+#endif
+#define err(format, arg...) \
+ printk(KERN_ERR AUDIO_NAME ": " format "\n" , ## arg)
+#define info(format, arg...) \
+ printk(KERN_INFO AUDIO_NAME ": " format "\n" , ## arg)
+#define warn(format, arg...) \
+ printk(KERN_WARNING AUDIO_NAME ": " format "\n" , ## arg)
+
+static int caps_charge = 2000;
+module_param(caps_charge, int, 0);
+MODULE_PARM_DESC(caps_charge, "WM8753 cap charge time (msecs)");
+
+static void wm8753_set_dai_mode(struct snd_soc_codec *codec,
+ unsigned int mode);
+
+/* codec private data */
+struct wm8753_priv {
+ unsigned int sysclk;
+ unsigned int pcmclk;
+};
+
+/*
+ * wm8753 register cache
+ * We can't read the WM8753 register space when we
+ * are using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8753_reg[] = {
+ 0x0008, 0x0000, 0x000a, 0x000a,
+ 0x0033, 0x0000, 0x0007, 0x00ff,
+ 0x00ff, 0x000f, 0x000f, 0x007b,
+ 0x0000, 0x0032, 0x0000, 0x00c3,
+ 0x00c3, 0x00c0, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0055,
+ 0x0005, 0x0050, 0x0055, 0x0050,
+ 0x0055, 0x0050, 0x0055, 0x0079,
+ 0x0079, 0x0079, 0x0079, 0x0079,
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0097, 0x0097, 0x0000, 0x0004,
+ 0x0000, 0x0083, 0x0024, 0x01ba,
+ 0x0000, 0x0083, 0x0024, 0x01ba,
+ 0x0000, 0x0000
+};
+
+/*
+ * read wm8753 register cache
+ */
+static inline unsigned int wm8753_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg < 1 || reg > (ARRAY_SIZE(wm8753_reg) + 1))
+ return -1;
+ return cache[reg - 1];
+}
+
+/*
+ * write wm8753 register cache
+ */
+static inline void wm8753_write_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg, unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ if (reg < 1 || reg > 0x3f)
+ return;
+ cache[reg - 1] = value;
+}
+
+/*
+ * write to the WM8753 register space
+ */
+static int wm8753_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 data[2];
+
+ /* data is
+ * D15..D9 WM8753 register offset
+ * D8...D0 register data
+ */
+ data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+ data[1] = value & 0x00ff;
+
+ wm8753_write_reg_cache (codec, reg, value);
+ if (codec->hw_write(codec->control_data, data, 2) == 2)
+ return 0;
+ else
+ return -EIO;
+}
+
+#define wm8753_reset(c) wm8753_write(c, WM8753_RESET, 0)
+
+/*
+ * WM8753 Controls
+ */
+static const char *wm8753_base[] = {"Linear Control", "Adaptive Boost"};
+static const char *wm8753_base_filter[] =
+ {"130Hz @ 48kHz", "200Hz @ 48kHz", "100Hz @ 16kHz", "400Hz @ 48kHz",
+ "100Hz @ 8kHz", "200Hz @ 8kHz"};
+static const char *wm8753_treble[] = {"8kHz", "4kHz"};
+static const char *wm8753_alc_func[] = {"Off", "Right", "Left", "Stereo"};
+static const char *wm8753_ng_type[] = {"Constant PGA Gain", "Mute ADC Output"};
+static const char *wm8753_3d_func[] = {"Capture", "Playback"};
+static const char *wm8753_3d_uc[] = {"2.2kHz", "1.5kHz"};
+static const char *wm8753_3d_lc[] = {"200Hz", "500Hz"};
+static const char *wm8753_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz"};
+static const char *wm8753_mono_mix[] = {"Stereo", "Left", "Right", "Mono"};
+static const char *wm8753_dac_phase[] = {"Non Inverted", "Inverted"};
+static const char *wm8753_line_mix[] = {"Line 1 + 2", "Line 1 - 2",
+ "Line 1", "Line 2"};
+static const char *wm8753_mono_mux[] = {"Line Mix", "Rx Mix"};
+static const char *wm8753_right_mux[] = {"Line 2", "Rx Mix"};
+static const char *wm8753_left_mux[] = {"Line 1", "Rx Mix"};
+static const char *wm8753_rxmsel[] = {"RXP - RXN", "RXP + RXN", "RXP", "RXN"};
+static const char *wm8753_sidetone_mux[] = {"Left PGA", "Mic 1", "Mic 2",
+ "Right PGA"};
+static const char *wm8753_mono2_src[] = {"Inverted Mono 1", "Left", "Right",
+ "Left + Right"};
+static const char *wm8753_out3[] = {"VREF", "ROUT2", "Left + Right"};
+static const char *wm8753_out4[] = {"VREF", "Capture ST", "LOUT2"};
+static const char *wm8753_radcsel[] = {"PGA", "Line or RXP-RXN", "Sidetone"};
+static const char *wm8753_ladcsel[] = {"PGA", "Line or RXP-RXN", "Line"};
+static const char *wm8753_mono_adc[] = {"Stereo", "Analogue Mix Left",
+ "Analogue Mix Right", "Digital Mono Mix"};
+static const char *wm8753_adc_hp[] = {"3.4Hz @ 48kHz", "82Hz @ 16k",
+ "82Hz @ 8kHz", "170Hz @ 8kHz"};
+static const char *wm8753_adc_filter[] = {"HiFi", "Voice"};
+static const char *wm8753_mic_sel[] = {"Mic 1", "Mic 2", "Mic 3"};
+static const char *wm8753_dai_mode[] = {"DAI 0", "DAI 1", "DAI 2", "DAI 3"};
+static const char *wm8753_dat_sel[] = {"Stereo", "Left ADC", "Right ADC",
+ "Channel Swap"};
+
+static const struct soc_enum wm8753_enum[] = {
+SOC_ENUM_SINGLE(WM8753_BASS, 7, 2, wm8753_base),
+SOC_ENUM_SINGLE(WM8753_BASS, 4, 6, wm8753_base_filter),
+SOC_ENUM_SINGLE(WM8753_TREBLE, 6, 2, wm8753_treble),
+SOC_ENUM_SINGLE(WM8753_ALC1, 7, 4, wm8753_alc_func),
+SOC_ENUM_SINGLE(WM8753_NGATE, 1, 2, wm8753_ng_type),
+SOC_ENUM_SINGLE(WM8753_3D, 7, 2, wm8753_3d_func),
+SOC_ENUM_SINGLE(WM8753_3D, 6, 2, wm8753_3d_uc),
+SOC_ENUM_SINGLE(WM8753_3D, 5, 2, wm8753_3d_lc),
+SOC_ENUM_SINGLE(WM8753_DAC, 1, 4, wm8753_deemp),
+SOC_ENUM_SINGLE(WM8753_DAC, 4, 4, wm8753_mono_mix),
+SOC_ENUM_SINGLE(WM8753_DAC, 6, 2, wm8753_dac_phase),
+SOC_ENUM_SINGLE(WM8753_INCTL1, 3, 4, wm8753_line_mix),
+SOC_ENUM_SINGLE(WM8753_INCTL1, 2, 2, wm8753_mono_mux),
+SOC_ENUM_SINGLE(WM8753_INCTL1, 1, 2, wm8753_right_mux),
+SOC_ENUM_SINGLE(WM8753_INCTL1, 0, 2, wm8753_left_mux),
+SOC_ENUM_SINGLE(WM8753_INCTL2, 6, 4, wm8753_rxmsel),
+SOC_ENUM_SINGLE(WM8753_INCTL2, 4, 4, wm8753_sidetone_mux),
+SOC_ENUM_SINGLE(WM8753_OUTCTL, 7, 4, wm8753_mono2_src),
+SOC_ENUM_SINGLE(WM8753_OUTCTL, 0, 3, wm8753_out3),
+SOC_ENUM_SINGLE(WM8753_ADCTL2, 7, 3, wm8753_out4),
+SOC_ENUM_SINGLE(WM8753_ADCIN, 2, 3, wm8753_radcsel),
+SOC_ENUM_SINGLE(WM8753_ADCIN, 0, 3, wm8753_ladcsel),
+SOC_ENUM_SINGLE(WM8753_ADCIN, 4, 4, wm8753_mono_adc),
+SOC_ENUM_SINGLE(WM8753_ADC, 2, 4, wm8753_adc_hp),
+SOC_ENUM_SINGLE(WM8753_ADC, 4, 2, wm8753_adc_filter),
+SOC_ENUM_SINGLE(WM8753_MICBIAS, 6, 3, wm8753_mic_sel),
+SOC_ENUM_SINGLE(WM8753_IOCTL, 2, 4, wm8753_dai_mode),
+SOC_ENUM_SINGLE(WM8753_ADC, 7, 4, wm8753_dat_sel),
+};
+
+
+static int wm8753_get_dai(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+
+ ucontrol->value.integer.value[0] = (mode & 0xc) >> 2;
+ return 0;
+}
+
+static int wm8753_set_dai(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+
+ if (((mode &0xc) >> 2) == ucontrol->value.integer.value[0])
+ return 0;
+
+ mode &= 0xfff3;
+ mode |= (ucontrol->value.integer.value[0] << 2);
+
+ wm8753_write(codec, WM8753_IOCTL, mode);
+ wm8753_set_dai_mode(codec, ucontrol->value.integer.value[0]);
+ return 1;
+}
+
+static const struct snd_kcontrol_new wm8753_snd_controls[] = {
+SOC_DOUBLE_R("PCM Volume", WM8753_LDAC, WM8753_RDAC, 0, 255, 0),
+
+SOC_DOUBLE_R("ADC Capture Volume", WM8753_LADC, WM8753_RADC, 0, 255, 0),
+
+SOC_DOUBLE_R("Headphone Playback Volume", WM8753_LOUT1V, WM8753_ROUT1V, 0, 127, 0),
+SOC_DOUBLE_R("Speaker Playback Volume", WM8753_LOUT2V, WM8753_ROUT2V, 0, 127, 0),
+
+SOC_SINGLE("Mono Playback Volume", WM8753_MOUTV, 0, 127, 0),
+
+SOC_DOUBLE_R("Bypass Playback Volume", WM8753_LOUTM1, WM8753_ROUTM1, 4, 7, 1),
+SOC_DOUBLE_R("Sidetone Playback Volume", WM8753_LOUTM2, WM8753_ROUTM2, 4, 7, 1),
+SOC_DOUBLE_R("Voice Playback Volume", WM8753_LOUTM2, WM8753_ROUTM2, 0, 7, 1),
+
+SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8753_LOUT1V, WM8753_ROUT1V, 7, 1, 0),
+SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8753_LOUT2V, WM8753_ROUT2V, 7, 1, 0),
+
+SOC_SINGLE("Mono Bypass Playback Volume", WM8753_MOUTM1, 4, 7, 1),
+SOC_SINGLE("Mono Sidetone Playback Volume", WM8753_MOUTM2, 4, 7, 1),
+SOC_SINGLE("Mono Voice Playback Volume", WM8753_MOUTM2, 4, 7, 1),
+SOC_SINGLE("Mono Playback ZC Switch", WM8753_MOUTV, 7, 1, 0),
+
+SOC_ENUM("Bass Boost", wm8753_enum[0]),
+SOC_ENUM("Bass Filter", wm8753_enum[1]),
+SOC_SINGLE("Bass Volume", WM8753_BASS, 0, 15, 1),
+
+SOC_SINGLE("Treble Volume", WM8753_TREBLE, 0, 15, 1),
+SOC_ENUM("Treble Cut-off", wm8753_enum[2]),
+
+SOC_DOUBLE("Sidetone Capture Volume", WM8753_RECMIX1, 0, 4, 7, 1),
+SOC_SINGLE("Voice Sidetone Capture Volume", WM8753_RECMIX2, 0, 7, 1),
+
+SOC_DOUBLE_R("Capture Volume", WM8753_LINVOL, WM8753_RINVOL, 0, 63, 0),
+SOC_DOUBLE_R("Capture ZC Switch", WM8753_LINVOL, WM8753_RINVOL, 6, 1, 0),
+SOC_DOUBLE_R("Capture Switch", WM8753_LINVOL, WM8753_RINVOL, 7, 1, 1),
+
+SOC_ENUM("Capture Filter Select", wm8753_enum[23]),
+SOC_ENUM("Capture Filter Cut-off", wm8753_enum[24]),
+SOC_SINGLE("Capture Filter Switch", WM8753_ADC, 0, 1, 1),
+
+SOC_SINGLE("ALC Capture Target Volume", WM8753_ALC1, 0, 7, 0),
+SOC_SINGLE("ALC Capture Max Volume", WM8753_ALC1, 4, 7, 0),
+SOC_ENUM("ALC Capture Function", wm8753_enum[3]),
+SOC_SINGLE("ALC Capture ZC Switch", WM8753_ALC2, 8, 1, 0),
+SOC_SINGLE("ALC Capture Hold Time", WM8753_ALC2, 0, 15, 1),
+SOC_SINGLE("ALC Capture Decay Time", WM8753_ALC3, 4, 15, 1),
+SOC_SINGLE("ALC Capture Attack Time", WM8753_ALC3, 0, 15, 0),
+SOC_SINGLE("ALC Capture NG Threshold", WM8753_NGATE, 3, 31, 0),
+SOC_ENUM("ALC Capture NG Type", wm8753_enum[4]),
+SOC_SINGLE("ALC Capture NG Switch", WM8753_NGATE, 0, 1, 0),
+
+SOC_ENUM("3D Function", wm8753_enum[5]),
+SOC_ENUM("3D Upper Cut-off", wm8753_enum[6]),
+SOC_ENUM("3D Lower Cut-off", wm8753_enum[7]),
+SOC_SINGLE("3D Volume", WM8753_3D, 1, 15, 0),
+SOC_SINGLE("3D Switch", WM8753_3D, 0, 1, 0),
+
+SOC_SINGLE("Capture 6dB Attenuate", WM8753_ADCTL1, 2, 1, 0),
+SOC_SINGLE("Playback 6dB Attenuate", WM8753_ADCTL1, 1, 1, 0),
+
+SOC_ENUM("De-emphasis", wm8753_enum[8]),
+SOC_ENUM("Playback Mono Mix", wm8753_enum[9]),
+SOC_ENUM("Playback Phase", wm8753_enum[10]),
+
+SOC_SINGLE("Mic2 Capture Volume", WM8753_INCTL1, 7, 3, 0),
+SOC_SINGLE("Mic1 Capture Volume", WM8753_INCTL1, 5, 3, 0),
+
+SOC_ENUM_EXT("DAI Mode", wm8753_enum[26], wm8753_get_dai, wm8753_set_dai),
+
+SOC_ENUM("ADC Data Select", wm8753_enum[27]),
+};
+
+/* add non dapm controls */
+static int wm8753_add_controls(struct snd_soc_codec *codec)
+{
+ int err, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8753_snd_controls); i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&wm8753_snd_controls[i],codec, NULL));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * _DAPM_ Controls
+ */
+
+/* Left Mixer */
+static const struct snd_kcontrol_new wm8753_left_mixer_controls[] = {
+SOC_DAPM_SINGLE("Voice Playback Switch", WM8753_LOUTM2, 8, 1, 0),
+SOC_DAPM_SINGLE("Sidetone Playback Switch", WM8753_LOUTM2, 7, 1, 0),
+SOC_DAPM_SINGLE("Left Playback Switch", WM8753_LOUTM1, 8, 1, 0),
+SOC_DAPM_SINGLE("Bypass Playback Switch", WM8753_LOUTM1, 7, 1, 0),
+};
+
+/* Right mixer */
+static const struct snd_kcontrol_new wm8753_right_mixer_controls[] = {
+SOC_DAPM_SINGLE("Voice Playback Switch", WM8753_ROUTM2, 8, 1, 0),
+SOC_DAPM_SINGLE("Sidetone Playback Switch", WM8753_ROUTM2, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8753_ROUTM1, 8, 1, 0),
+SOC_DAPM_SINGLE("Bypass Playback Switch", WM8753_ROUTM1, 7, 1, 0),
+};
+
+/* Mono mixer */
+static const struct snd_kcontrol_new wm8753_mono_mixer_controls[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8753_MOUTM1, 8, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8753_MOUTM2, 8, 1, 0),
+SOC_DAPM_SINGLE("Voice Playback Switch", WM8753_MOUTM2, 3, 1, 0),
+SOC_DAPM_SINGLE("Sidetone Playback Switch", WM8753_MOUTM2, 7, 1, 0),
+SOC_DAPM_SINGLE("Bypass Playback Switch", WM8753_MOUTM1, 7, 1, 0),
+};
+
+/* Mono 2 Mux */
+static const struct snd_kcontrol_new wm8753_mono2_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[17]);
+
+/* Out 3 Mux */
+static const struct snd_kcontrol_new wm8753_out3_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[18]);
+
+/* Out 4 Mux */
+static const struct snd_kcontrol_new wm8753_out4_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[19]);
+
+/* ADC Mono Mix */
+static const struct snd_kcontrol_new wm8753_adc_mono_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[22]);
+
+/* Record mixer */
+static const struct snd_kcontrol_new wm8753_record_mixer_controls[] = {
+SOC_DAPM_SINGLE("Voice Capture Switch", WM8753_RECMIX2, 3, 1, 0),
+SOC_DAPM_SINGLE("Left Capture Switch", WM8753_RECMIX1, 3, 1, 0),
+SOC_DAPM_SINGLE("Right Capture Switch", WM8753_RECMIX1, 7, 1, 0),
+};
+
+/* Left ADC mux */
+static const struct snd_kcontrol_new wm8753_adc_left_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[21]);
+
+/* Right ADC mux */
+static const struct snd_kcontrol_new wm8753_adc_right_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[20]);
+
+/* MIC mux */
+static const struct snd_kcontrol_new wm8753_mic_mux_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[16]);
+
+/* ALC mixer */
+static const struct snd_kcontrol_new wm8753_alc_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Capture Switch", WM8753_INCTL2, 3, 1, 0),
+SOC_DAPM_SINGLE("Mic2 Capture Switch", WM8753_INCTL2, 2, 1, 0),
+SOC_DAPM_SINGLE("Mic1 Capture Switch", WM8753_INCTL2, 1, 1, 0),
+SOC_DAPM_SINGLE("Rx Capture Switch", WM8753_INCTL2, 0, 1, 0),
+};
+
+/* Left Line mux */
+static const struct snd_kcontrol_new wm8753_line_left_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[14]);
+
+/* Right Line mux */
+static const struct snd_kcontrol_new wm8753_line_right_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[13]);
+
+/* Mono Line mux */
+static const struct snd_kcontrol_new wm8753_line_mono_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[12]);
+
+/* Line mux and mixer */
+static const struct snd_kcontrol_new wm8753_line_mux_mix_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[11]);
+
+/* Rx mux and mixer */
+static const struct snd_kcontrol_new wm8753_rx_mux_mix_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[15]);
+
+/* Mic Selector Mux */
+static const struct snd_kcontrol_new wm8753_mic_sel_mux_controls =
+SOC_DAPM_ENUM("Route", wm8753_enum[25]);
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+SND_SOC_DAPM_MICBIAS("Mic Bias", WM8753_PWR1, 5, 0),
+SND_SOC_DAPM_MIXER("Left Mixer", WM8753_PWR4, 0, 0,
+ &wm8753_left_mixer_controls[0], ARRAY_SIZE(wm8753_left_mixer_controls)),
+SND_SOC_DAPM_PGA("Left Out 1", WM8753_PWR3, 8, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Left Out 2", WM8753_PWR3, 6, 0, NULL, 0),
+SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback", WM8753_PWR1, 3, 0),
+SND_SOC_DAPM_OUTPUT("LOUT1"),
+SND_SOC_DAPM_OUTPUT("LOUT2"),
+SND_SOC_DAPM_MIXER("Right Mixer", WM8753_PWR4, 1, 0,
+ &wm8753_right_mixer_controls[0], ARRAY_SIZE(wm8753_right_mixer_controls)),
+SND_SOC_DAPM_PGA("Right Out 1", WM8753_PWR3, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Out 2", WM8753_PWR3, 5, 0, NULL, 0),
+SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback", WM8753_PWR1, 2, 0),
+SND_SOC_DAPM_OUTPUT("ROUT1"),
+SND_SOC_DAPM_OUTPUT("ROUT2"),
+SND_SOC_DAPM_MIXER("Mono Mixer", WM8753_PWR4, 2, 0,
+ &wm8753_mono_mixer_controls[0], ARRAY_SIZE(wm8753_mono_mixer_controls)),
+SND_SOC_DAPM_PGA("Mono Out 1", WM8753_PWR3, 2, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Mono Out 2", WM8753_PWR3, 1, 0, NULL, 0),
+SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", WM8753_PWR1, 4, 0),
+SND_SOC_DAPM_OUTPUT("MONO1"),
+SND_SOC_DAPM_MUX("Mono 2 Mux", SND_SOC_NOPM, 0, 0, &wm8753_mono2_controls),
+SND_SOC_DAPM_OUTPUT("MONO2"),
+SND_SOC_DAPM_MIXER("Out3 Left + Right", -1, 0, 0, NULL, 0),
+SND_SOC_DAPM_MUX("Out3 Mux", SND_SOC_NOPM, 0, 0, &wm8753_out3_controls),
+SND_SOC_DAPM_PGA("Out 3", WM8753_PWR3, 4, 0, NULL, 0),
+SND_SOC_DAPM_OUTPUT("OUT3"),
+SND_SOC_DAPM_MUX("Out4 Mux", SND_SOC_NOPM, 0, 0, &wm8753_out4_controls),
+SND_SOC_DAPM_PGA("Out 4", WM8753_PWR3, 3, 0, NULL, 0),
+SND_SOC_DAPM_OUTPUT("OUT4"),
+SND_SOC_DAPM_MIXER("Playback Mixer", WM8753_PWR4, 3, 0,
+ &wm8753_record_mixer_controls[0],
+ ARRAY_SIZE(wm8753_record_mixer_controls)),
+SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8753_PWR2, 3, 0),
+SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8753_PWR2, 2, 0),
+SND_SOC_DAPM_MUX("Capture Left Mixer", SND_SOC_NOPM, 0, 0,
+ &wm8753_adc_mono_controls),
+SND_SOC_DAPM_MUX("Capture Right Mixer", SND_SOC_NOPM, 0, 0,
+ &wm8753_adc_mono_controls),
+SND_SOC_DAPM_MUX("Capture Left Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_adc_left_controls),
+SND_SOC_DAPM_MUX("Capture Right Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_adc_right_controls),
+SND_SOC_DAPM_MUX("Mic Sidetone Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_mic_mux_controls),
+SND_SOC_DAPM_PGA("Left Capture Volume", WM8753_PWR2, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Capture Volume", WM8753_PWR2, 4, 0, NULL, 0),
+SND_SOC_DAPM_MIXER("ALC Mixer", WM8753_PWR2, 6, 0,
+ &wm8753_alc_mixer_controls[0], ARRAY_SIZE(wm8753_alc_mixer_controls)),
+SND_SOC_DAPM_MUX("Line Left Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_line_left_controls),
+SND_SOC_DAPM_MUX("Line Right Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_line_right_controls),
+SND_SOC_DAPM_MUX("Line Mono Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_line_mono_controls),
+SND_SOC_DAPM_MUX("Line Mixer", WM8753_PWR2, 0, 0,
+ &wm8753_line_mux_mix_controls),
+SND_SOC_DAPM_MUX("Rx Mixer", WM8753_PWR2, 1, 0,
+ &wm8753_rx_mux_mix_controls),
+SND_SOC_DAPM_PGA("Mic 1 Volume", WM8753_PWR2, 8, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Mic 2 Volume", WM8753_PWR2, 7, 0, NULL, 0),
+SND_SOC_DAPM_MUX("Mic Selection Mux", SND_SOC_NOPM, 0, 0,
+ &wm8753_mic_sel_mux_controls),
+SND_SOC_DAPM_INPUT("LINE1"),
+SND_SOC_DAPM_INPUT("LINE2"),
+SND_SOC_DAPM_INPUT("RXP"),
+SND_SOC_DAPM_INPUT("RXN"),
+SND_SOC_DAPM_INPUT("ACIN"),
+SND_SOC_DAPM_OUTPUT("ACOP"),
+SND_SOC_DAPM_INPUT("MIC1N"),
+SND_SOC_DAPM_INPUT("MIC1"),
+SND_SOC_DAPM_INPUT("MIC2N"),
+SND_SOC_DAPM_INPUT("MIC2"),
+SND_SOC_DAPM_VMID("VREF"),
+};
+
+static const char *audio_map[][3] = {
+ /* left mixer */
+ {"Left Mixer", "Left Playback Switch", "Left DAC"},
+ {"Left Mixer", "Voice Playback Switch", "Voice DAC"},
+ {"Left Mixer", "Sidetone Playback Switch", "Mic Sidetone Mux"},
+ {"Left Mixer", "Bypass Playback Switch", "Line Left Mux"},
+
+ /* right mixer */
+ {"Right Mixer", "Right Playback Switch", "Right DAC"},
+ {"Right Mixer", "Voice Playback Switch", "Voice DAC"},
+ {"Right Mixer", "Sidetone Playback Switch", "Mic Sidetone Mux"},
+ {"Right Mixer", "Bypass Playback Switch", "Line Right Mux"},
+
+ /* mono mixer */
+ {"Mono Mixer", "Voice Playback Switch", "Voice DAC"},
+ {"Mono Mixer", "Left Playback Switch", "Left DAC"},
+ {"Mono Mixer", "Right Playback Switch", "Right DAC"},
+ {"Mono Mixer", "Sidetone Playback Switch", "Mic Sidetone Mux"},
+ {"Mono Mixer", "Bypass Playback Switch", "Line Mono Mux"},
+
+ /* left out */
+ {"Left Out 1", NULL, "Left Mixer"},
+ {"Left Out 2", NULL, "Left Mixer"},
+ {"LOUT1", NULL, "Left Out 1"},
+ {"LOUT2", NULL, "Left Out 2"},
+
+ /* right out */
+ {"Right Out 1", NULL, "Right Mixer"},
+ {"Right Out 2", NULL, "Right Mixer"},
+ {"ROUT1", NULL, "Right Out 1"},
+ {"ROUT2", NULL, "Right Out 2"},
+
+ /* mono 1 out */
+ {"Mono Out 1", NULL, "Mono Mixer"},
+ {"MONO1", NULL, "Mono Out 1"},
+
+ /* mono 2 out */
+ {"Mono 2 Mux", "Left + Right", "Out3 Left + Right"},
+ {"Mono 2 Mux", "Inverted Mono 1", "MONO1"},
+ {"Mono 2 Mux", "Left", "Left Mixer"},
+ {"Mono 2 Mux", "Right", "Right Mixer"},
+ {"Mono Out 2", NULL, "Mono 2 Mux"},
+ {"MONO2", NULL, "Mono Out 2"},
+
+ /* out 3 */
+ {"Out3 Left + Right", NULL, "Left Mixer"},
+ {"Out3 Left + Right", NULL, "Right Mixer"},
+ {"Out3 Mux", "VREF", "VREF"},
+ {"Out3 Mux", "Left + Right", "Out3 Left + Right"},
+ {"Out3 Mux", "ROUT2", "ROUT2"},
+ {"Out 3", NULL, "Out3 Mux"},
+ {"OUT3", NULL, "Out 3"},
+
+ /* out 4 */
+ {"Out4 Mux", "VREF", "VREF"},
+ {"Out4 Mux", "Capture ST", "Capture ST Mixer"},
+ {"Out4 Mux", "LOUT2", "LOUT2"},
+ {"Out 4", NULL, "Out4 Mux"},
+ {"OUT4", NULL, "Out 4"},
+
+ /* record mixer */
+ {"Playback Mixer", "Left Capture Switch", "Left Mixer"},
+ {"Playback Mixer", "Voice Capture Switch", "Mono Mixer"},
+ {"Playback Mixer", "Right Capture Switch", "Right Mixer"},
+
+ /* Mic/SideTone Mux */
+ {"Mic Sidetone Mux", "Left PGA", "Left Capture Volume"},
+ {"Mic Sidetone Mux", "Right PGA", "Right Capture Volume"},
+ {"Mic Sidetone Mux", "Mic 1", "Mic 1 Volume"},
+ {"Mic Sidetone Mux", "Mic 2", "Mic 2 Volume"},
+
+ /* Capture Left Mux */
+ {"Capture Left Mux", "PGA", "Left Capture Volume"},
+ {"Capture Left Mux", "Line or RXP-RXN", "Line Left Mux"},
+ {"Capture Left Mux", "Line", "LINE1"},
+
+ /* Capture Right Mux */
+ {"Capture Right Mux", "PGA", "Right Capture Volume"},
+ {"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"},
+ {"Capture Right Mux", "Sidetone", "Capture ST Mixer"},
+
+ /* Mono Capture mixer-mux */
+ {"Capture Right Mixer", "Stereo", "Capture Right Mux"},
+ {"Capture Left Mixer", "Analogue Mix Left", "Capture Left Mux"},
+ {"Capture Left Mixer", "Analogue Mix Left", "Capture Right Mux"},
+ {"Capture Right Mixer", "Analogue Mix Right", "Capture Left Mux"},
+ {"Capture Right Mixer", "Analogue Mix Right", "Capture Right Mux"},
+ {"Capture Left Mixer", "Digital Mono Mix", "Capture Left Mux"},
+ {"Capture Left Mixer", "Digital Mono Mix", "Capture Right Mux"},
+ {"Capture Right Mixer", "Digital Mono Mix", "Capture Left Mux"},
+ {"Capture Right Mixer", "Digital Mono Mix", "Capture Right Mux"},
+
+ /* ADC */
+ {"Left ADC", NULL, "Capture Left Mixer"},
+ {"Right ADC", NULL, "Capture Right Mixer"},
+
+ /* Left Capture Volume */
+ {"Left Capture Volume", NULL, "ACIN"},
+
+ /* Right Capture Volume */
+ {"Right Capture Volume", NULL, "Mic 2 Volume"},
+
+ /* ALC Mixer */
+ {"ALC Mixer", "Line Capture Switch", "Line Mixer"},
+ {"ALC Mixer", "Mic2 Capture Switch", "Mic 2 Volume"},
+ {"ALC Mixer", "Mic1 Capture Switch", "Mic 1 Volume"},
+ {"ALC Mixer", "Rx Capture Switch", "Rx Mixer"},
+
+ /* Line Left Mux */
+ {"Line Left Mux", "Line 1", "LINE1"},
+ {"Line Left Mux", "Rx Mix", "Rx Mixer"},
+
+ /* Line Right Mux */
+ {"Line Right Mux", "Line 2", "LINE2"},
+ {"Line Right Mux", "Rx Mix", "Rx Mixer"},
+
+ /* Line Mono Mux */
+ {"Line Mono Mux", "Line Mix", "Line Mixer"},
+ {"Line Mono Mux", "Rx Mix", "Rx Mixer"},
+
+ /* Line Mixer/Mux */
+ {"Line Mixer", "Line 1 + 2", "LINE1"},
+ {"Line Mixer", "Line 1 - 2", "LINE1"},
+ {"Line Mixer", "Line 1 + 2", "LINE2"},
+ {"Line Mixer", "Line 1 - 2", "LINE2"},
+ {"Line Mixer", "Line 1", "LINE1"},
+ {"Line Mixer", "Line 2", "LINE2"},
+
+ /* Rx Mixer/Mux */
+ {"Rx Mixer", "RXP - RXN", "RXP"},
+ {"Rx Mixer", "RXP + RXN", "RXP"},
+ {"Rx Mixer", "RXP - RXN", "RXN"},
+ {"Rx Mixer", "RXP + RXN", "RXN"},
+ {"Rx Mixer", "RXP", "RXP"},
+ {"Rx Mixer", "RXN", "RXN"},
+
+ /* Mic 1 Volume */
+ {"Mic 1 Volume", NULL, "MIC1N"},
+ {"Mic 1 Volume", NULL, "Mic Selection Mux"},
+
+ /* Mic 2 Volume */
+ {"Mic 2 Volume", NULL, "MIC2N"},
+ {"Mic 2 Volume", NULL, "MIC2"},
+
+ /* Mic Selector Mux */
+ {"Mic Selection Mux", "Mic 1", "MIC1"},
+ {"Mic Selection Mux", "Mic 2", "MIC2N"},
+ {"Mic Selection Mux", "Mic 3", "MIC2"},
+
+ /* ACOP */
+ {"ACOP", NULL, "ALC Mixer"},
+
+ /* terminator */
+ {NULL, NULL, NULL},
+};
+
+static int wm8753_add_widgets(struct snd_soc_codec *codec)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8753_dapm_widgets); i++)
+ snd_soc_dapm_new_control(codec, &wm8753_dapm_widgets[i]);
+
+ /* set up the WM8753 audio map */
+ for (i = 0; audio_map[i][0] != NULL; i++) {
+ snd_soc_dapm_connect_input(codec, audio_map[i][0],
+ audio_map[i][1], audio_map[i][2]);
+ }
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+/* PLL divisors */
+struct _pll_div {
+ u32 div2:1;
+ u32 n:4;
+ u32 k:24;
+};
+
+/* The size in bits of the pll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_PLL_SIZE ((1 << 22) * 10)
+
+static void pll_factors(struct _pll_div *pll_div, unsigned int target,
+ unsigned int source)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod;
+
+ Ndiv = target / source;
+ if (Ndiv < 6) {
+ source >>= 1;
+ pll_div->div2 = 1;
+ Ndiv = target / source;
+ } else
+ pll_div->div2 = 0;
+
+ if ((Ndiv < 6) || (Ndiv > 12))
+ printk(KERN_WARNING
+ "WM8753 N value outwith recommended range! N = %d\n",Ndiv);
+
+ pll_div->n = Ndiv;
+ Nmod = target % source;
+ Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, source);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ /* Check if we need to round */
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ K /= 10;
+
+ pll_div->k = K;
+}
+
+static int wm8753_set_dai_pll(struct snd_soc_codec_dai *codec_dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+ u16 reg, enable;
+ int offset;
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ if (pll_id < WM8753_PLL1 || pll_id > WM8753_PLL2)
+ return -ENODEV;
+
+ if (pll_id == WM8753_PLL1) {
+ offset = 0;
+ enable = 0x10;
+ reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xffef;
+ } else {
+ offset = 4;
+ enable = 0x8;
+ reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfff7;
+ }
+
+ if (!freq_in || !freq_out) {
+ /* disable PLL */
+ wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
+ wm8753_write(codec, WM8753_CLOCK, reg);
+ return 0;
+ } else {
+ u16 value = 0;
+ struct _pll_div pll_div;
+
+ pll_factors(&pll_div, freq_out * 8, freq_in);
+
+ /* set up N and K PLL divisor ratios */
+ /* bits 8:5 = PLL_N, bits 3:0 = PLL_K[21:18] */
+ value = (pll_div.n << 5) + ((pll_div.k & 0x3c0000) >> 18);
+ wm8753_write(codec, WM8753_PLL1CTL2 + offset, value);
+
+ /* bits 8:0 = PLL_K[17:9] */
+ value = (pll_div.k & 0x03fe00) >> 9;
+ wm8753_write(codec, WM8753_PLL1CTL3 + offset, value);
+
+ /* bits 8:0 = PLL_K[8:0] */
+ value = pll_div.k & 0x0001ff;
+ wm8753_write(codec, WM8753_PLL1CTL4 + offset, value);
+
+ /* set PLL as input and enable */
+ wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
+ (pll_div.div2 << 3));
+ wm8753_write(codec, WM8753_CLOCK, reg | enable);
+ }
+ return 0;
+}
+
+struct _coeff_div {
+ u32 mclk;
+ u32 rate;
+ u8 sr:5;
+ u8 usb:1;
+};
+
+/* codec hifi mclk (after PLL) clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+ /* 8k */
+ {12288000, 8000, 0x6, 0x0},
+ {11289600, 8000, 0x16, 0x0},
+ {18432000, 8000, 0x7, 0x0},
+ {16934400, 8000, 0x17, 0x0},
+ {12000000, 8000, 0x6, 0x1},
+
+ /* 11.025k */
+ {11289600, 11025, 0x18, 0x0},
+ {16934400, 11025, 0x19, 0x0},
+ {12000000, 11025, 0x19, 0x1},
+
+ /* 16k */
+ {12288000, 16000, 0xa, 0x0},
+ {18432000, 16000, 0xb, 0x0},
+ {12000000, 16000, 0xa, 0x1},
+
+ /* 22.05k */
+ {11289600, 22050, 0x1a, 0x0},
+ {16934400, 22050, 0x1b, 0x0},
+ {12000000, 22050, 0x1b, 0x1},
+
+ /* 32k */
+ {12288000, 32000, 0xc, 0x0},
+ {18432000, 32000, 0xd, 0x0},
+ {12000000, 32000, 0xa, 0x1},
+
+ /* 44.1k */
+ {11289600, 44100, 0x10, 0x0},
+ {16934400, 44100, 0x11, 0x0},
+ {12000000, 44100, 0x11, 0x1},
+
+ /* 48k */
+ {12288000, 48000, 0x0, 0x0},
+ {18432000, 48000, 0x1, 0x0},
+ {12000000, 48000, 0x0, 0x1},
+
+ /* 88.2k */
+ {11289600, 88200, 0x1e, 0x0},
+ {16934400, 88200, 0x1f, 0x0},
+ {12000000, 88200, 0x1f, 0x1},
+
+ /* 96k */
+ {12288000, 96000, 0xe, 0x0},
+ {18432000, 96000, 0xf, 0x0},
+ {12000000, 96000, 0xe, 0x1},
+};
+
+static int get_coeff(int mclk, int rate)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+ if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+ return i;
+ }
+ return -EINVAL;
+}
+
+/*
+ * Clock after PLL and dividers
+ */
+static int wm8753_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8753_priv *wm8753 = codec->private_data;
+
+ switch (freq) {
+ case 11289600:
+ case 12000000:
+ case 12288000:
+ case 16934400:
+ case 18432000:
+ if (clk_id == WM8753_MCLK) {
+ wm8753->sysclk = freq;
+ return 0;
+ } else if (clk_id == WM8753_PCMCLK) {
+ wm8753->pcmclk = freq;
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
+/*
+ * Set's ADC and Voice DAC format.
+ */
+static int wm8753_vdac_adc_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01ec;
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ voice |= 0x0002;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ voice |= 0x0001;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ voice |= 0x0003;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ voice |= 0x0013;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8753_write(codec, WM8753_PCM, voice);
+ return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ */
+static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct wm8753_priv *wm8753 = codec->private_data;
+ u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01f3;
+ u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x017f;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ voice |= 0x0004;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ voice |= 0x0008;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ voice |= 0x000c;
+ break;
+ }
+
+ /* sample rate */
+ if (params_rate(params) * 384 == wm8753->pcmclk)
+ srate |= 0x80;
+ wm8753_write(codec, WM8753_SRATE1, srate);
+
+ wm8753_write(codec, WM8753_PCM, voice);
+ return 0;
+}
+
+/*
+ * Set's PCM dai fmt and BCLK.
+ */
+static int wm8753_pcm_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 voice, ioctl;
+
+ voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x011f;
+ ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x015d;
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ioctl |= 0x2;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ voice |= 0x0040;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ voice |= 0x0080;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ voice &= ~0x0010;
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ voice |= 0x0090;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ voice |= 0x0080;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ voice |= 0x0010;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8753_write(codec, WM8753_PCM, voice);
+ wm8753_write(codec, WM8753_IOCTL, ioctl);
+ return 0;
+}
+
+static int wm8753_set_dai_clkdiv(struct snd_soc_codec_dai *codec_dai,
+ int div_id, int div)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 reg;
+
+ switch (div_id) {
+ case WM8753_PCMDIV:
+ reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0x003f;
+ wm8753_write(codec, WM8753_CLOCK, reg | div);
+ break;
+ case WM8753_BCLKDIV:
+ reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x01c7;
+ wm8753_write(codec, WM8753_SRATE2, reg | div);
+ break;
+ case WM8753_VXCLKDIV:
+ reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x003f;
+ wm8753_write(codec, WM8753_SRATE2, reg | div);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Set's HiFi DAC format.
+ */
+static int wm8753_hdac_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01e0;
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ hifi |= 0x0002;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ hifi |= 0x0001;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ hifi |= 0x0003;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ hifi |= 0x0013;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8753_write(codec, WM8753_HIFI, hifi);
+ return 0;
+}
+
+/*
+ * Set's I2S DAI format.
+ */
+static int wm8753_i2s_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 ioctl, hifi;
+
+ hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x011f;
+ ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x00ae;
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ioctl |= 0x1;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ hifi |= 0x0040;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ hifi |= 0x0080;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ hifi &= ~0x0010;
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ hifi |= 0x0090;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ hifi |= 0x0080;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ hifi |= 0x0010;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8753_write(codec, WM8753_HIFI, hifi);
+ wm8753_write(codec, WM8753_IOCTL, ioctl);
+ return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ */
+static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct wm8753_priv *wm8753 = codec->private_data;
+ u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x01c0;
+ u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01f3;
+ int coeff;
+
+ /* is digital filter coefficient valid ? */
+ coeff = get_coeff(wm8753->sysclk, params_rate(params));
+ if (coeff < 0) {
+ printk(KERN_ERR "wm8753 invalid MCLK or rate\n");
+ return coeff;
+ }
+ wm8753_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
+ coeff_div[coeff].usb);
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ hifi |= 0x0004;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ hifi |= 0x0008;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ hifi |= 0x000c;
+ break;
+ }
+
+ wm8753_write(codec, WM8753_HIFI, hifi);
+ return 0;
+}
+
+static int wm8753_mode1v_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 clock;
+
+ /* set clk source as pcmclk */
+ clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
+ wm8753_write(codec, WM8753_CLOCK, clock);
+
+ if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
+ return -EINVAL;
+ return wm8753_pcm_set_dai_fmt(codec_dai, fmt);
+}
+
+static int wm8753_mode1h_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ if (wm8753_hdac_set_dai_fmt(codec_dai, fmt) < 0)
+ return -EINVAL;
+ return wm8753_i2s_set_dai_fmt(codec_dai, fmt);
+}
+
+static int wm8753_mode2_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 clock;
+
+ /* set clk source as pcmclk */
+ clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
+ wm8753_write(codec, WM8753_CLOCK, clock);
+
+ if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
+ return -EINVAL;
+ return wm8753_i2s_set_dai_fmt(codec_dai, fmt);
+}
+
+static int wm8753_mode3_4_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 clock;
+
+ /* set clk source as mclk */
+ clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
+ wm8753_write(codec, WM8753_CLOCK, clock | 0x4);
+
+ if (wm8753_hdac_set_dai_fmt(codec_dai, fmt) < 0)
+ return -EINVAL;
+ if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
+ return -EINVAL;
+ return wm8753_i2s_set_dai_fmt(codec_dai, fmt);
+}
+
+static int wm8753_mute(struct snd_soc_codec_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 mute_reg = wm8753_read_reg_cache(codec, WM8753_DAC) & 0xfff7;
+
+ /* the digital mute covers the HiFi and Voice DAC's on the WM8753.
+ * make sure we check if they are not both active when we mute */
+ if (mute && dai->id == 1) {
+ if (!wm8753_dai[WM8753_DAI_VOICE].playback.active ||
+ !wm8753_dai[WM8753_DAI_HIFI].playback.active)
+ wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+ } else {
+ if (mute)
+ wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+ else
+ wm8753_write(codec, WM8753_DAC, mute_reg);
+ }
+
+ return 0;
+}
+
+static int wm8753_dapm_event(struct snd_soc_codec *codec, int event)
+{
+ u16 pwr_reg = wm8753_read_reg_cache(codec, WM8753_PWR1) & 0xfe3e;
+
+ switch (event) {
+ case SNDRV_CTL_POWER_D0: /* full On */
+ /* set vmid to 50k and unmute dac */
+ wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
+ break;
+ case SNDRV_CTL_POWER_D1: /* partial On */
+ case SNDRV_CTL_POWER_D2: /* partial On */
+ /* set vmid to 5k for quick power up */
+ wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
+ break;
+ case SNDRV_CTL_POWER_D3hot: /* Off, with power */
+ /* mute dac and set vmid to 500k, enable VREF */
+ wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
+ break;
+ case SNDRV_CTL_POWER_D3cold: /* Off, without power */
+ wm8753_write(codec, WM8753_PWR1, 0x0001);
+ break;
+ }
+ codec->dapm_state = event;
+ return 0;
+}
+
+#define WM8753_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define WM8753_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+/*
+ * The WM8753 supports upto 4 different and mutually exclusive DAI
+ * configurations. This gives 2 PCM's available for use, hifi and voice.
+ * NOTE: The Voice PCM cannot play or capture audio to the CPU as it's DAI
+ * is connected between the wm8753 and a BT codec or GSM modem.
+ *
+ * 1. Voice over PCM DAI - HIFI DAC over HIFI DAI
+ * 2. Voice over HIFI DAI - HIFI disabled
+ * 3. Voice disabled - HIFI over HIFI
+ * 4. Voice disabled - HIFI over HIFI, uses voice DAI LRC for capture
+ */
+static const struct snd_soc_codec_dai wm8753_all_dai[] = {
+/* DAI HiFi mode 1 */
+{ .name = "WM8753 HiFi",
+ .id = 1,
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .capture = { /* dummy for fast DAI switching */
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .ops = {
+ .hw_params = wm8753_i2s_hw_params,},
+ .dai_ops = {
+ .digital_mute = wm8753_mute,
+ .set_fmt = wm8753_mode1h_set_dai_fmt,
+ .set_clkdiv = wm8753_set_dai_clkdiv,
+ .set_pll = wm8753_set_dai_pll,
+ .set_sysclk = wm8753_set_dai_sysclk,
+ },
+},
+/* DAI Voice mode 1 */
+{ .name = "WM8753 Voice",
+ .id = 1,
+ .playback = {
+ .stream_name = "Voice Playback",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .ops = {
+ .hw_params = wm8753_pcm_hw_params,},
+ .dai_ops = {
+ .digital_mute = wm8753_mute,
+ .set_fmt = wm8753_mode1v_set_dai_fmt,
+ .set_clkdiv = wm8753_set_dai_clkdiv,
+ .set_pll = wm8753_set_dai_pll,
+ .set_sysclk = wm8753_set_dai_sysclk,
+ },
+},
+/* DAI HiFi mode 2 - dummy */
+{ .name = "WM8753 HiFi",
+ .id = 2,
+},
+/* DAI Voice mode 2 */
+{ .name = "WM8753 Voice",
+ .id = 2,
+ .playback = {
+ .stream_name = "Voice Playback",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .ops = {
+ .hw_params = wm8753_pcm_hw_params,},
+ .dai_ops = {
+ .digital_mute = wm8753_mute,
+ .set_fmt = wm8753_mode2_set_dai_fmt,
+ .set_clkdiv = wm8753_set_dai_clkdiv,
+ .set_pll = wm8753_set_dai_pll,
+ .set_sysclk = wm8753_set_dai_sysclk,
+ },
+},
+/* DAI HiFi mode 3 */
+{ .name = "WM8753 HiFi",
+ .id = 3,
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .ops = {
+ .hw_params = wm8753_i2s_hw_params,},
+ .dai_ops = {
+ .digital_mute = wm8753_mute,
+ .set_fmt = wm8753_mode3_4_set_dai_fmt,
+ .set_clkdiv = wm8753_set_dai_clkdiv,
+ .set_pll = wm8753_set_dai_pll,
+ .set_sysclk = wm8753_set_dai_sysclk,
+ },
+},
+/* DAI Voice mode 3 - dummy */
+{ .name = "WM8753 Voice",
+ .id = 3,
+},
+/* DAI HiFi mode 4 */
+{ .name = "WM8753 HiFi",
+ .id = 4,
+ .playback = {
+ .stream_name = "HiFi Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8753_RATES,
+ .formats = WM8753_FORMATS,},
+ .ops = {
+ .hw_params = wm8753_i2s_hw_params,},
+ .dai_ops = {
+ .digital_mute = wm8753_mute,
+ .set_fmt = wm8753_mode3_4_set_dai_fmt,
+ .set_clkdiv = wm8753_set_dai_clkdiv,
+ .set_pll = wm8753_set_dai_pll,
+ .set_sysclk = wm8753_set_dai_sysclk,
+ },
+},
+/* DAI Voice mode 4 - dummy */
+{ .name = "WM8753 Voice",
+ .id = 4,
+},
+};
+
+struct snd_soc_codec_dai wm8753_dai[2];
+EXPORT_SYMBOL_GPL(wm8753_dai);
+
+static void wm8753_set_dai_mode(struct snd_soc_codec *codec, unsigned int mode)
+{
+ if (mode < 4) {
+ int playback_active, capture_active, codec_active, pop_wait;
+ void *private_data;
+
+ playback_active = wm8753_dai[0].playback.active;
+ capture_active = wm8753_dai[0].capture.active;
+ codec_active = wm8753_dai[0].active;
+ private_data = wm8753_dai[0].private_data;
+ pop_wait = wm8753_dai[0].pop_wait;
+ wm8753_dai[0] = wm8753_all_dai[mode << 1];
+ wm8753_dai[0].playback.active = playback_active;
+ wm8753_dai[0].capture.active = capture_active;
+ wm8753_dai[0].active = codec_active;
+ wm8753_dai[0].private_data = private_data;
+ wm8753_dai[0].pop_wait = pop_wait;
+
+ playback_active = wm8753_dai[1].playback.active;
+ capture_active = wm8753_dai[1].capture.active;
+ codec_active = wm8753_dai[1].active;
+ private_data = wm8753_dai[1].private_data;
+ pop_wait = wm8753_dai[1].pop_wait;
+ wm8753_dai[1] = wm8753_all_dai[(mode << 1) + 1];
+ wm8753_dai[1].playback.active = playback_active;
+ wm8753_dai[1].capture.active = capture_active;
+ wm8753_dai[1].active = codec_active;
+ wm8753_dai[1].private_data = private_data;
+ wm8753_dai[1].pop_wait = pop_wait;
+ }
+ wm8753_dai[0].codec = codec;
+ wm8753_dai[1].codec = codec;
+}
+
+static void wm8753_work(struct work_struct *work)
+{
+ struct snd_soc_codec *codec =
+ container_of(work, struct snd_soc_codec, delayed_work.work);
+ wm8753_dapm_event(codec, codec->dapm_state);
+}
+
+static int wm8753_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ /* we only need to suspend if we are a valid card */
+ if(!codec->card)
+ return 0;
+
+ wm8753_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
+ return 0;
+}
+
+static int wm8753_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+ int i;
+ u8 data[2];
+ u16 *cache = codec->reg_cache;
+
+ /* we only need to resume if we are a valid card */
+ if(!codec->card)
+ return 0;
+
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) {
+ if (i + 1 == WM8753_RESET)
+ continue;
+ data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001);
+ data[1] = cache[i] & 0x00ff;
+ codec->hw_write(codec->control_data, data, 2);
+ }
+
+ wm8753_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
+
+ /* charge wm8753 caps */
+ if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) {
+ wm8753_dapm_event(codec, SNDRV_CTL_POWER_D2);
+ codec->dapm_state = SNDRV_CTL_POWER_D0;
+ schedule_delayed_work(&codec->delayed_work,
+ msecs_to_jiffies(caps_charge));
+ }
+
+ return 0;
+}
+
+/*
+ * initialise the WM8753 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int wm8753_init(struct snd_soc_device *socdev)
+{
+ struct snd_soc_codec *codec = socdev->codec;
+ int reg, ret = 0;
+
+ codec->name = "WM8753";
+ codec->owner = THIS_MODULE;
+ codec->read = wm8753_read_reg_cache;
+ codec->write = wm8753_write;
+ codec->dapm_event = wm8753_dapm_event;
+ codec->dai = wm8753_dai;
+ codec->num_dai = 2;
+ codec->reg_cache_size = sizeof(wm8753_reg);
+ codec->reg_cache = kmemdup(wm8753_reg, sizeof(wm8753_reg), GFP_KERNEL);
+
+ if (codec->reg_cache == NULL)
+ return -ENOMEM;
+
+ wm8753_set_dai_mode(codec, 0);
+
+ wm8753_reset(codec);
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8753: failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ /* charge output caps */
+ wm8753_dapm_event(codec, SNDRV_CTL_POWER_D2);
+ codec->dapm_state = SNDRV_CTL_POWER_D3hot;
+ schedule_delayed_work(&codec->delayed_work,
+ msecs_to_jiffies(caps_charge));
+
+ /* set the update bits */
+ reg = wm8753_read_reg_cache(codec, WM8753_LDAC);
+ wm8753_write(codec, WM8753_LDAC, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_RDAC);
+ wm8753_write(codec, WM8753_RDAC, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_LADC);
+ wm8753_write(codec, WM8753_LADC, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_RADC);
+ wm8753_write(codec, WM8753_RADC, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V);
+ wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V);
+ wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V);
+ wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V);
+ wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_LINVOL);
+ wm8753_write(codec, WM8753_LINVOL, reg | 0x0100);
+ reg = wm8753_read_reg_cache(codec, WM8753_RINVOL);
+ wm8753_write(codec, WM8753_RINVOL, reg | 0x0100);
+
+ wm8753_add_controls(codec);
+ wm8753_add_widgets(codec);
+ ret = snd_soc_register_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8753: failed to register card\n");
+ goto card_err;
+ }
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ kfree(codec->reg_cache);
+ return ret;
+}
+
+/* If the i2c layer weren't so broken, we could pass this kind of data
+ around */
+static struct snd_soc_device *wm8753_socdev;
+
+#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
+
+/*
+ * WM8753 2 wire address is determined by GPIO5
+ * state during powerup.
+ * low = 0x1a
+ * high = 0x1b
+ */
+static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
+
+/* Magic definition of all other variables and things */
+I2C_CLIENT_INSMOD;
+
+static struct i2c_driver wm8753_i2c_driver;
+static struct i2c_client client_template;
+
+static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+ struct snd_soc_device *socdev = wm8753_socdev;
+ struct wm8753_setup_data *setup = socdev->codec_data;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct i2c_client *i2c;
+ int ret;
+
+ if (addr != setup->i2c_address)
+ return -ENODEV;
+
+ client_template.adapter = adap;
+ client_template.addr = addr;
+
+ i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
+ if (i2c == NULL){
+ kfree(codec);
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(i2c, codec);
+ codec->control_data = i2c;
+
+ ret = i2c_attach_client(i2c);
+ if (ret < 0) {
+ err("failed to attach codec at addr %x\n", addr);
+ goto err;
+ }
+
+ ret = wm8753_init(socdev);
+ if (ret < 0) {
+ err("failed to initialise WM8753\n");
+ goto err;
+ }
+
+ return ret;
+
+err:
+ kfree(codec);
+ kfree(i2c);
+ return ret;
+}
+
+static int wm8753_i2c_detach(struct i2c_client *client)
+{
+ struct snd_soc_codec *codec = i2c_get_clientdata(client);
+ i2c_detach_client(client);
+ kfree(codec->reg_cache);
+ kfree(client);
+ return 0;
+}
+
+static int wm8753_i2c_attach(struct i2c_adapter *adap)
+{
+ return i2c_probe(adap, &addr_data, wm8753_codec_probe);
+}
+
+/* corgi i2c codec control layer */
+static struct i2c_driver wm8753_i2c_driver = {
+ .driver = {
+ .name = "WM8753 I2C Codec",
+ .owner = THIS_MODULE,
+ },
+ .id = I2C_DRIVERID_WM8753,
+ .attach_adapter = wm8753_i2c_attach,
+ .detach_client = wm8753_i2c_detach,
+ .command = NULL,
+};
+
+static struct i2c_client client_template = {
+ .name = "WM8753",
+ .driver = &wm8753_i2c_driver,
+};
+#endif
+
+static int wm8753_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct wm8753_setup_data *setup;
+ struct snd_soc_codec *codec;
+ struct wm8753_priv *wm8753;
+ int ret = 0;
+
+ info("WM8753 Audio Codec %s", WM8753_VERSION);
+
+ setup = socdev->codec_data;
+ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (codec == NULL)
+ return -ENOMEM;
+
+ wm8753 = kzalloc(sizeof(struct wm8753_priv), GFP_KERNEL);
+ if (wm8753 == NULL) {
+ kfree(codec);
+ return -ENOMEM;
+ }
+
+ codec->private_data = wm8753;
+ socdev->codec = codec;
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+ wm8753_socdev = socdev;
+ INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
+
+#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
+ if (setup->i2c_address) {
+ normal_i2c[0] = setup->i2c_address;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ ret = i2c_add_driver(&wm8753_i2c_driver);
+ if (ret != 0)
+ printk(KERN_ERR "can't add i2c driver");
+ }
+#else
+ /* Add other interfaces here */
+#endif
+ return ret;
+}
+
+/*
+ * This function forces any delayed work to be queued and run.
+ */
+static int run_delayed_work(struct delayed_work *dwork)
+{
+ int ret;
+
+ /* cancel any work waiting to be queued. */
+ ret = cancel_delayed_work(dwork);
+
+ /* if there was any work waiting then we run it now and
+ * wait for it's completion */
+ if (ret) {
+ schedule_delayed_work(dwork, 0);
+ flush_scheduled_work();
+ }
+ return ret;
+}
+
+/* power down chip */
+static int wm8753_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ if (codec->control_data)
+ wm8753_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
+ run_delayed_work(&codec->delayed_work);
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
+ i2c_del_driver(&wm8753_i2c_driver);
+#endif
+ kfree(codec->private_data);
+ kfree(codec);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8753 = {
+ .probe = wm8753_probe,
+ .remove = wm8753_remove,
+ .suspend = wm8753_suspend,
+ .resume = wm8753_resume,
+};
+
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8753);
+
+MODULE_DESCRIPTION("ASoC WM8753 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8753.h b/sound/soc/codecs/wm8753.h
new file mode 100644
index 0000000..95e2a1f
--- /dev/null
+++ b/sound/soc/codecs/wm8753.h
@@ -0,0 +1,126 @@
+/*
+ * wm8753.h -- audio driver for WM8753
+ *
+ * Copyright 2003 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _WM8753_H
+#define _WM8753_H
+
+/* WM8753 register space */
+
+#define WM8753_DAC 0x01
+#define WM8753_ADC 0x02
+#define WM8753_PCM 0x03
+#define WM8753_HIFI 0x04
+#define WM8753_IOCTL 0x05
+#define WM8753_SRATE1 0x06
+#define WM8753_SRATE2 0x07
+#define WM8753_LDAC 0x08
+#define WM8753_RDAC 0x09
+#define WM8753_BASS 0x0a
+#define WM8753_TREBLE 0x0b
+#define WM8753_ALC1 0x0c
+#define WM8753_ALC2 0x0d
+#define WM8753_ALC3 0x0e
+#define WM8753_NGATE 0x0f
+#define WM8753_LADC 0x10
+#define WM8753_RADC 0x11
+#define WM8753_ADCTL1 0x12
+#define WM8753_3D 0x13
+#define WM8753_PWR1 0x14
+#define WM8753_PWR2 0x15
+#define WM8753_PWR3 0x16
+#define WM8753_PWR4 0x17
+#define WM8753_ID 0x18
+#define WM8753_INTPOL 0x19
+#define WM8753_INTEN 0x1a
+#define WM8753_GPIO1 0x1b
+#define WM8753_GPIO2 0x1c
+#define WM8753_RESET 0x1f
+#define WM8753_RECMIX1 0x20
+#define WM8753_RECMIX2 0x21
+#define WM8753_LOUTM1 0x22
+#define WM8753_LOUTM2 0x23
+#define WM8753_ROUTM1 0x24
+#define WM8753_ROUTM2 0x25
+#define WM8753_MOUTM1 0x26
+#define WM8753_MOUTM2 0x27
+#define WM8753_LOUT1V 0x28
+#define WM8753_ROUT1V 0x29
+#define WM8753_LOUT2V 0x2a
+#define WM8753_ROUT2V 0x2b
+#define WM8753_MOUTV 0x2c
+#define WM8753_OUTCTL 0x2d
+#define WM8753_ADCIN 0x2e
+#define WM8753_INCTL1 0x2f
+#define WM8753_INCTL2 0x30
+#define WM8753_LINVOL 0x31
+#define WM8753_RINVOL 0x32
+#define WM8753_MICBIAS 0x33
+#define WM8753_CLOCK 0x34
+#define WM8753_PLL1CTL1 0x35
+#define WM8753_PLL1CTL2 0x36
+#define WM8753_PLL1CTL3 0x37
+#define WM8753_PLL1CTL4 0x38
+#define WM8753_PLL2CTL1 0x39
+#define WM8753_PLL2CTL2 0x3a
+#define WM8753_PLL2CTL3 0x3b
+#define WM8753_PLL2CTL4 0x3c
+#define WM8753_BIASCTL 0x3d
+#define WM8753_ADCTL2 0x3f
+
+struct wm8753_setup_data {
+ unsigned short i2c_address;
+};
+
+#define WM8753_PLL1 0
+#define WM8753_PLL2 1
+
+/* clock inputs */
+#define WM8753_MCLK 0
+#define WM8753_PCMCLK 1
+
+/* clock divider id's */
+#define WM8753_PCMDIV 0
+#define WM8753_BCLKDIV 1
+#define WM8753_VXCLKDIV 2
+
+/* PCM clock dividers */
+#define WM8753_PCM_DIV_1 (0 << 6)
+#define WM8753_PCM_DIV_3 (2 << 6)
+#define WM8753_PCM_DIV_5_5 (3 << 6)
+#define WM8753_PCM_DIV_2 (4 << 6)
+#define WM8753_PCM_DIV_4 (5 << 6)
+#define WM8753_PCM_DIV_6 (6 << 6)
+#define WM8753_PCM_DIV_8 (7 << 6)
+
+/* BCLK clock dividers */
+#define WM8753_BCLK_DIV_1 (0 << 3)
+#define WM8753_BCLK_DIV_2 (1 << 3)
+#define WM8753_BCLK_DIV_4 (2 << 3)
+#define WM8753_BCLK_DIV_8 (3 << 3)
+#define WM8753_BCLK_DIV_16 (4 << 3)
+
+/* VXCLK clock dividers */
+#define WM8753_VXCLK_DIV_1 (0 << 6)
+#define WM8753_VXCLK_DIV_2 (1 << 6)
+#define WM8753_VXCLK_DIV_4 (2 << 6)
+#define WM8753_VXCLK_DIV_8 (3 << 6)
+#define WM8753_VXCLK_DIV_16 (4 << 6)
+
+#define WM8753_DAI_HIFI 0
+#define WM8753_DAI_VOICE 1
+
+extern struct snd_soc_codec_dai wm8753_dai[2];
+extern struct snd_soc_codec_device soc_codec_dev_wm8753;
+
+#endif
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index ee7a691..264413a 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -676,14 +676,13 @@
codec = socdev->codec;
mutex_init(&codec->mutex);
- codec->reg_cache =
- kzalloc(sizeof(u16) * ARRAY_SIZE(wm9712_reg), GFP_KERNEL);
+ codec->reg_cache = kmemdup(wm9712_reg, sizeof(wm9712_reg), GFP_KERNEL);
+
if (codec->reg_cache == NULL) {
ret = -ENOMEM;
goto cache_err;
}
- memcpy(codec->reg_cache, wm9712_reg, sizeof(u16) * ARRAY_SIZE(wm9712_reg));
- codec->reg_cache_size = sizeof(u16) * ARRAY_SIZE(wm9712_reg);
+ codec->reg_cache_size = sizeof(wm9712_reg);
codec->reg_cache_step = 2;
codec->name = "WM9712";
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index b9ab3b8..a83e229 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -1,5 +1,3 @@
-menu "SoC Audio for the Intel PXA2xx"
-
config SND_PXA2XX_SOC
tristate "SoC Audio for the Intel PXA2xx chip"
depends on ARCH_PXA && SND_SOC
@@ -55,5 +53,3 @@
help
Say Y if you want to add support for SoC audio on Sharp
Zaurus SL-C6000x models (Tosa).
-
-endmenu
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
new file mode 100644
index 0000000..044a371
--- /dev/null
+++ b/sound/soc/s3c24xx/Kconfig
@@ -0,0 +1,10 @@
+config SND_S3C24XX_SOC
+ tristate "SoC Audio for the Samsung S3C24XX chips"
+ depends on ARCH_S3C2410 && SND_SOC
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the S3C24XX AC97, I2S or SSP interface. You will also need
+ to select the audio interfaces to support below.
+
+config SND_S3C24XX_SOC_I2S
+ tristate
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
new file mode 100644
index 0000000..6f0fffc
--- /dev/null
+++ b/sound/soc/s3c24xx/Makefile
@@ -0,0 +1,6 @@
+# S3c24XX Platform Support
+snd-soc-s3c24xx-objs := s3c24xx-pcm.o
+snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
+
+obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
+obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
new file mode 100644
index 0000000..8ca314d
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -0,0 +1,441 @@
+/*
+ * s3c24xx-i2s.c -- ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * Revision history
+ * 11th Dec 2006 Merged with Simtec driver
+ * 10th Nov 2006 Initial version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/audio.h>
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+
+#define S3C24XX_I2S_DEBUG 0
+#if S3C24XX_I2S_DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
+#else
+#define DBG(x...)
+#endif
+
+static struct s3c2410_dma_client s3c24xx_dma_client_out = {
+ .name = "I2S PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c24xx_dma_client_in = {
+ .name = "I2S PCM Stereo in"
+};
+
+static struct s3c24xx_pcm_dma_params s3c24xx_i2s_pcm_stereo_out = {
+ .client = &s3c24xx_dma_client_out,
+ .channel = DMACH_I2S_OUT,
+ .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .dma_size = 2,
+};
+
+static struct s3c24xx_pcm_dma_params s3c24xx_i2s_pcm_stereo_in = {
+ .client = &s3c24xx_dma_client_in,
+ .channel = DMACH_I2S_IN,
+ .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .dma_size = 2,
+};
+
+struct s3c24xx_i2s_info {
+ void __iomem *regs;
+ struct clk *iis_clk;
+};
+static struct s3c24xx_i2s_info s3c24xx_i2s;
+
+static void s3c24xx_snd_txctrl(int on)
+{
+ u32 iisfcon;
+ u32 iiscon;
+ u32 iismod;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+ iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+ iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+ DBG("r: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon);
+
+ if (on) {
+ iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
+ iiscon |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
+ iiscon &= ~S3C2410_IISCON_TXIDLE;
+ iismod |= S3C2410_IISMOD_TXMODE;
+
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+ writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+ } else {
+ /* note, we have to disable the FIFOs otherwise bad things
+ * seem to happen when the DMA stops. According to the
+ * Samsung supplied kernel, this should allow the DMA
+ * engine and FIFOs to reset. If this isn't allowed, the
+ * DMA engine will simply freeze randomly.
+ */
+
+ iisfcon &= ~S3C2410_IISFCON_TXENABLE;
+ iisfcon &= ~S3C2410_IISFCON_TXDMA;
+ iiscon |= S3C2410_IISCON_TXIDLE;
+ iiscon &= ~S3C2410_IISCON_TXDMAEN;
+ iismod &= ~S3C2410_IISMOD_TXMODE;
+
+ writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+ writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ }
+
+ DBG("w: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon);
+}
+
+static void s3c24xx_snd_rxctrl(int on)
+{
+ u32 iisfcon;
+ u32 iiscon;
+ u32 iismod;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+ iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+ iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+ DBG("r: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon);
+
+ if (on) {
+ iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
+ iiscon |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
+ iiscon &= ~S3C2410_IISCON_RXIDLE;
+ iismod |= S3C2410_IISMOD_RXMODE;
+
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+ writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+ } else {
+ /* note, we have to disable the FIFOs otherwise bad things
+ * seem to happen when the DMA stops. According to the
+ * Samsung supplied kernel, this should allow the DMA
+ * engine and FIFOs to reset. If this isn't allowed, the
+ * DMA engine will simply freeze randomly.
+ */
+
+ iisfcon &= ~S3C2410_IISFCON_RXENABLE;
+ iisfcon &= ~S3C2410_IISFCON_RXDMA;
+ iiscon |= S3C2410_IISCON_RXIDLE;
+ iiscon &= ~S3C2410_IISCON_RXDMAEN;
+ iismod &= ~S3C2410_IISMOD_RXMODE;
+
+ writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+ writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ }
+
+ DBG("w: IISCON: %lx IISMOD: %lx IISFCON: %lx\n", iiscon, iismod, iisfcon);
+}
+
+/*
+ * Wait for the LR signal to allow synchronisation to the L/R clock
+ * from the codec. May only be needed for slave mode.
+ */
+static int s3c24xx_snd_lrsync(void)
+{
+ u32 iiscon;
+ unsigned long timeout = jiffies + msecs_to_jiffies(5);
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ while (1) {
+ iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+ if (iiscon & S3C2410_IISCON_LRINDEX)
+ break;
+
+ if (timeout < jiffies)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * Check whether CPU is the master or slave
+ */
+static inline int s3c24xx_snd_is_clkmaster(void)
+{
+ DBG("Entered %s\n", __FUNCTION__);
+
+ return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
+}
+
+/*
+ * Set S3C24xx I2S DAI format
+ */
+static int s3c24xx_i2s_set_fmt(struct snd_soc_cpu_dai *cpu_dai,
+ unsigned int fmt)
+{
+ u32 iismod;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+ DBG("hw_params r: IISMOD: %lx \n", iismod);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ iismod |= S3C2410_IISMOD_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_LEFT_J:
+ iismod |= S3C2410_IISMOD_MSB;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ DBG("hw_params w: IISMOD: %lx \n", iismod);
+ return 0;
+}
+
+static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ u32 iismod;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ rtd->dai->cpu_dai->dma_data = &s3c24xx_i2s_pcm_stereo_out;
+ else
+ rtd->dai->cpu_dai->dma_data = &s3c24xx_i2s_pcm_stereo_in;
+
+ /* Working copies of register */
+ iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+ DBG("hw_params r: IISMOD: %lx\n", iismod);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ iismod |= S3C2410_IISMOD_16BIT;
+ break;
+ }
+
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ DBG("hw_params w: IISMOD: %lx\n", iismod);
+ return 0;
+}
+
+static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ int ret = 0;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (!s3c24xx_snd_is_clkmaster()) {
+ ret = s3c24xx_snd_lrsync();
+ if (ret)
+ goto exit_err;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ s3c24xx_snd_rxctrl(1);
+ else
+ s3c24xx_snd_txctrl(1);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ s3c24xx_snd_rxctrl(0);
+ else
+ s3c24xx_snd_txctrl(0);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+exit_err:
+ return ret;
+}
+
+/*
+ * Set S3C24xx Clock source
+ */
+static int s3c24xx_i2s_set_sysclk(struct snd_soc_cpu_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ iismod &= ~S3C2440_IISMOD_MPLL;
+
+ switch (clk_id) {
+ case S3C24XX_CLKSRC_PCLK:
+ break;
+ case S3C24XX_CLKSRC_MPLL:
+ iismod |= S3C2440_IISMOD_MPLL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ return 0;
+}
+
+/*
+ * Set S3C24xx Clock dividers
+ */
+static int s3c24xx_i2s_set_clkdiv(struct snd_soc_cpu_dai *cpu_dai,
+ int div_id, int div)
+{
+ u32 reg;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ switch (div_id) {
+ case S3C24XX_DIV_MCLK:
+ reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
+ writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ break;
+ case S3C24XX_DIV_BCLK:
+ reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
+ writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+ break;
+ case S3C24XX_DIV_PRESCALER:
+ writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
+ reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+ writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * To avoid duplicating clock code, allow machine driver to
+ * get the clockrate from here.
+ */
+u32 s3c24xx_i2s_get_clockrate(void)
+{
+ return clk_get_rate(s3c24xx_i2s.iis_clk);
+}
+EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
+
+static int s3c24xx_i2s_probe(struct platform_device *pdev)
+{
+ DBG("Entered %s\n", __FUNCTION__);
+
+ s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100);
+ if (s3c24xx_i2s.regs == NULL)
+ return -ENXIO;
+
+ s3c24xx_i2s.iis_clk=clk_get(&pdev->dev, "iis");
+ if (s3c24xx_i2s.iis_clk == NULL) {
+ DBG("failed to get iis_clock\n");
+ return -ENODEV;
+ }
+ clk_enable(s3c24xx_i2s.iis_clk);
+
+ /* Configure the I2S pins in correct mode */
+ s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK);
+ s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK);
+ s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK);
+ s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI);
+ s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO);
+
+ writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+
+ s3c24xx_snd_txctrl(0);
+ s3c24xx_snd_rxctrl(0);
+
+ return 0;
+}
+
+#define S3C24XX_I2S_RATES \
+ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+struct snd_soc_cpu_dai s3c24xx_i2s_dai = {
+ .name = "s3c24xx-i2s",
+ .id = 0,
+ .type = SND_SOC_DAI_I2S,
+ .probe = s3c24xx_i2s_probe,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = S3C24XX_I2S_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = S3C24XX_I2S_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+ .ops = {
+ .trigger = s3c24xx_i2s_trigger,
+ .hw_params = s3c24xx_i2s_hw_params,},
+ .dai_ops = {
+ .set_fmt = s3c24xx_i2s_set_fmt,
+ .set_clkdiv = s3c24xx_i2s_set_clkdiv,
+ .set_sysclk = s3c24xx_i2s_set_sysclk,
+ },
+};
+EXPORT_SYMBOL_GPL(s3c24xx_i2s_dai);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.h b/sound/soc/s3c24xx/s3c24xx-i2s.h
new file mode 100644
index 0000000..537b4ec
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.h
@@ -0,0 +1,37 @@
+/*
+ * s3c24xx-i2s.c -- ALSA Soc Audio Layer
+ *
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Revision history
+ * 10th Nov 2006 Initial version.
+ */
+
+#ifndef S3C24XXI2S_H_
+#define S3C24XXI2S_H_
+
+/* clock sources */
+#define S3C24XX_CLKSRC_PCLK 0
+#define S3C24XX_CLKSRC_MPLL 1
+
+/* Clock dividers */
+#define S3C24XX_DIV_MCLK 0
+#define S3C24XX_DIV_BCLK 1
+#define S3C24XX_DIV_PRESCALER 2
+
+/* prescaler */
+#define S3C24XX_PRESCALE(a,b) \
+ (((a - 1) << S3C2410_IISPSR_INTSHIFT) | ((b - 1) << S3C2410_IISPSR_EXTSHFIT))
+
+u32 s3c24xx_i2s_get_clockrate(void);
+
+extern struct snd_soc_cpu_dai s3c24xx_i2s_dai;
+
+#endif /*S3C24XXI2S_H_*/
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
new file mode 100644
index 0000000..21dc697
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -0,0 +1,468 @@
+/*
+ * s3c24xx-pcm.c -- ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * (c) 2004-2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Revision history
+ * 11th Dec 2006 Merged with Simtec driver
+ * 10th Nov 2006 Initial version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/audio.h>
+
+#include "s3c24xx-pcm.h"
+
+#define S3C24XX_PCM_DEBUG 0
+#if S3C24XX_PCM_DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
+#else
+#define DBG(x...)
+#endif
+
+static const struct snd_pcm_hardware s3c24xx_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_U16_LE |
+ SNDRV_PCM_FMTBIT_U8 |
+ SNDRV_PCM_FMTBIT_S8,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 128*1024,
+ .period_bytes_min = PAGE_SIZE,
+ .period_bytes_max = PAGE_SIZE*2,
+ .periods_min = 2,
+ .periods_max = 128,
+ .fifo_size = 32,
+};
+
+struct s3c24xx_runtime_data {
+ spinlock_t lock;
+ int state;
+ unsigned int dma_loaded;
+ unsigned int dma_limit;
+ unsigned int dma_period;
+ dma_addr_t dma_start;
+ dma_addr_t dma_pos;
+ dma_addr_t dma_end;
+ struct s3c24xx_pcm_dma_params *params;
+};
+
+/* s3c24xx_pcm_enqueue
+ *
+ * place a dma buffer onto the queue for the dma system
+ * to handle.
+*/
+static void s3c24xx_pcm_enqueue(struct snd_pcm_substream *substream)
+{
+ struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+ dma_addr_t pos = prtd->dma_pos;
+ int ret;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ while (prtd->dma_loaded < prtd->dma_limit) {
+ unsigned long len = prtd->dma_period;
+
+ DBG("dma_loaded: %d\n",prtd->dma_loaded);
+
+ if ((pos + len) > prtd->dma_end) {
+ len = prtd->dma_end - pos;
+ DBG(KERN_DEBUG "%s: corrected dma len %ld\n",
+ __FUNCTION__, len);
+ }
+
+ ret = s3c2410_dma_enqueue(prtd->params->channel,
+ substream, pos, len);
+
+ if (ret == 0) {
+ prtd->dma_loaded++;
+ pos += prtd->dma_period;
+ if (pos >= prtd->dma_end)
+ pos = prtd->dma_start;
+ } else
+ break;
+ }
+
+ prtd->dma_pos = pos;
+}
+
+static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
+ void *dev_id, int size,
+ enum s3c2410_dma_buffresult result)
+{
+ struct snd_pcm_substream *substream = dev_id;
+ struct s3c24xx_runtime_data *prtd;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
+ return;
+
+ prtd = substream->runtime->private_data;
+
+ if (substream)
+ snd_pcm_period_elapsed(substream);
+
+ spin_lock(&prtd->lock);
+ if (prtd->state & ST_RUNNING) {
+ prtd->dma_loaded--;
+ s3c24xx_pcm_enqueue(substream);
+ }
+
+ spin_unlock(&prtd->lock);
+}
+
+static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct s3c24xx_runtime_data *prtd = runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct s3c24xx_pcm_dma_params *dma = rtd->dai->cpu_dai->dma_data;
+ unsigned long totbytes = params_buffer_bytes(params);
+ int ret=0;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ /* return if this is a bufferless transfer e.g.
+ * codec <--> BT codec or GSM modem -- lg FIXME */
+ if (!dma)
+ return 0;
+
+ /* prepare DMA */
+ prtd->params = dma;
+
+ DBG("params %p, client %p, channel %d\n", prtd->params,
+ prtd->params->client, prtd->params->channel);
+
+ ret = s3c2410_dma_request(prtd->params->channel,
+ prtd->params->client, NULL);
+
+ if (ret) {
+ DBG(KERN_ERR "failed to get dma channel\n");
+ return ret;
+ }
+
+ /* channel needs configuring for mem=>device, increment memory addr,
+ * sync to pclk, half-word transfers to the IIS-FIFO. */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ s3c2410_dma_devconfig(prtd->params->channel,
+ S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
+ S3C2410_DISRCC_APB, prtd->params->dma_addr);
+
+ s3c2410_dma_config(prtd->params->channel,
+ prtd->params->dma_size,
+ S3C2410_DCON_SYNC_PCLK |
+ S3C2410_DCON_HANDSHAKE);
+ } else {
+ s3c2410_dma_config(prtd->params->channel,
+ prtd->params->dma_size,
+ S3C2410_DCON_HANDSHAKE |
+ S3C2410_DCON_SYNC_PCLK);
+
+ s3c2410_dma_devconfig(prtd->params->channel,
+ S3C2410_DMASRC_HW, 0x3,
+ prtd->params->dma_addr);
+ }
+
+ s3c2410_dma_set_buffdone_fn(prtd->params->channel,
+ s3c24xx_audio_buffdone);
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+ runtime->dma_bytes = totbytes;
+
+ spin_lock_irq(&prtd->lock);
+ prtd->dma_loaded = 0;
+ prtd->dma_limit = runtime->hw.periods_min;
+ prtd->dma_period = params_period_bytes(params);
+ prtd->dma_start = runtime->dma_addr;
+ prtd->dma_pos = prtd->dma_start;
+ prtd->dma_end = prtd->dma_start + totbytes;
+ spin_unlock_irq(&prtd->lock);
+
+ return 0;
+}
+
+static int s3c24xx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ /* TODO - do we need to ensure DMA flushed */
+ snd_pcm_set_runtime_buffer(substream, NULL);
+
+ if (prtd->params) {
+ s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+ prtd->params = NULL;
+ }
+
+ return 0;
+}
+
+static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+ int ret = 0;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ /* return if this is a bufferless transfer e.g.
+ * codec <--> BT codec or GSM modem -- lg FIXME */
+ if (!prtd->params)
+ return 0;
+
+ /* flush the DMA channel */
+ s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+ prtd->dma_loaded = 0;
+ prtd->dma_pos = prtd->dma_start;
+
+ /* enqueue dma buffers */
+ s3c24xx_pcm_enqueue(substream);
+
+ return ret;
+}
+
+static int s3c24xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+ int ret = 0;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ spin_lock(&prtd->lock);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ prtd->state |= ST_RUNNING;
+ s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+ s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STARTED);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ prtd->state &= ~ST_RUNNING;
+ s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ spin_unlock(&prtd->lock);
+
+ return ret;
+}
+
+static snd_pcm_uframes_t
+ s3c24xx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct s3c24xx_runtime_data *prtd = runtime->private_data;
+ unsigned long res;
+ dma_addr_t src, dst;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ spin_lock(&prtd->lock);
+ s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ res = dst - prtd->dma_start;
+ else
+ res = src - prtd->dma_start;
+
+ spin_unlock(&prtd->lock);
+
+ DBG("Pointer %x %x\n",src,dst);
+
+ /* we seem to be getting the odd error from the pcm library due
+ * to out-of-bounds pointers. this is maybe due to the dma engine
+ * not having loaded the new values for the channel before being
+ * callled... (todo - fix )
+ */
+
+ if (res >= snd_pcm_lib_buffer_bytes(substream)) {
+ if (res == snd_pcm_lib_buffer_bytes(substream))
+ res = 0;
+ }
+
+ return bytes_to_frames(substream->runtime, res);
+}
+
+static int s3c24xx_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct s3c24xx_runtime_data *prtd;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ snd_soc_set_runtime_hwparams(substream, &s3c24xx_pcm_hardware);
+
+ prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
+ if (prtd == NULL)
+ return -ENOMEM;
+
+ runtime->private_data = prtd;
+ return 0;
+}
+
+static int s3c24xx_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct s3c24xx_runtime_data *prtd = runtime->private_data;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ if (prtd)
+ kfree(prtd);
+ else
+ DBG("s3c24xx_pcm_close called with prtd == NULL\n");
+
+ return 0;
+}
+
+static int s3c24xx_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+ runtime->dma_area,
+ runtime->dma_addr,
+ runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops s3c24xx_pcm_ops = {
+ .open = s3c24xx_pcm_open,
+ .close = s3c24xx_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = s3c24xx_pcm_hw_params,
+ .hw_free = s3c24xx_pcm_hw_free,
+ .prepare = s3c24xx_pcm_prepare,
+ .trigger = s3c24xx_pcm_trigger,
+ .pointer = s3c24xx_pcm_pointer,
+ .mmap = s3c24xx_pcm_mmap,
+};
+
+static int s3c24xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = s3c24xx_pcm_hardware.buffer_bytes_max;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ if (!buf->area)
+ return -ENOMEM;
+ buf->bytes = size;
+ return 0;
+}
+
+static void s3c24xx_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+
+ dma_free_writecombine(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+static u64 s3c24xx_pcm_dmamask = DMA_32BIT_MASK;
+
+static int s3c24xx_pcm_new(struct snd_card *card,
+ struct snd_soc_codec_dai *dai, struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ DBG("Entered %s\n", __FUNCTION__);
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &s3c24xx_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = 0xffffffff;
+
+ if (dai->playback.channels_min) {
+ ret = s3c24xx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ ret = s3c24xx_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+ out:
+ return ret;
+}
+
+struct snd_soc_platform s3c24xx_soc_platform = {
+ .name = "s3c24xx-audio",
+ .pcm_ops = &s3c24xx_pcm_ops,
+ .pcm_new = s3c24xx_pcm_new,
+ .pcm_free = s3c24xx_pcm_free_dma_buffers,
+};
+
+EXPORT_SYMBOL_GPL(s3c24xx_soc_platform);
+
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C24XX PCM DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.h b/sound/soc/s3c24xx/s3c24xx-pcm.h
new file mode 100644
index 0000000..0088c79
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.h
@@ -0,0 +1,31 @@
+/*
+ * s3c24xx-pcm.h --
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * ALSA PCM interface for the Samsung S3C24xx CPU
+ */
+
+#ifndef _S3C24XX_PCM_H
+#define _S3C24XX_PCM_H
+
+#define ST_RUNNING (1<<0)
+#define ST_OPENED (1<<1)
+
+struct s3c24xx_pcm_dma_params {
+ struct s3c2410_dma_client *client; /* stream identifier */
+ int channel; /* Channel ID */
+ dma_addr_t dma_addr;
+ int dma_size; /* Size of the DMA transfer */
+};
+
+#define S3C24XX_DAI_I2S 0
+
+/* platform data */
+extern struct snd_soc_platform s3c24xx_soc_platform;
+extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
+
+#endif
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7caf8c7..96bce55 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -882,13 +882,15 @@
if (wsink->id == snd_soc_dapm_input) {
if (wsource->id == snd_soc_dapm_micbias ||
wsource->id == snd_soc_dapm_mic ||
- wsink->id == snd_soc_dapm_line)
+ wsink->id == snd_soc_dapm_line ||
+ wsink->id == snd_soc_dapm_output)
wsink->ext = 1;
}
if (wsource->id == snd_soc_dapm_output) {
if (wsink->id == snd_soc_dapm_spk ||
wsink->id == snd_soc_dapm_hp ||
- wsink->id == snd_soc_dapm_line)
+ wsink->id == snd_soc_dapm_line ||
+ wsink->id == snd_soc_dapm_input)
wsource->ext = 1;
}
diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c
index 900a00d..dca0344 100644
--- a/sound/sparc/cs4231.c
+++ b/sound/sparc/cs4231.c
@@ -661,11 +661,9 @@
{
unsigned int what = 0;
struct snd_pcm_substream *s;
- struct list_head *pos;
unsigned long flags;
- snd_pcm_group_for_each(pos, substream) {
- s = snd_pcm_group_substream_entry(pos);
+ snd_pcm_group_for_each_entry(s, substream) {
if (s == chip->playback_substream) {
what |= CS4231_PLAYBACK_ENABLE;
snd_pcm_trigger_done(s, substream);
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index f05d02f..315360f 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -29,5 +29,33 @@
To compile this driver as a module, choose M here: the module
will be called snd-usb-usx2y.
+config SND_USB_CAIAQ
+ tristate "Native Instruments USB audio devices"
+ depends on SND && USB
+ select SND_HWDEP
+ select SND_RAWMIDI
+ select SND_PCM
+ help
+ Say Y here to include support for caiaq USB audio interfaces,
+ namely:
+
+ * Native Instruments RigKontrol2
+ * Native Instruments Kore Controller
+ * Native Instruments Audio Kontrol 1
+ * Native Instruments Audio 8 DJ
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-usb-caiaq.
+
+config SND_USB_CAIAQ_INPUT
+ bool "enable input device for controllers"
+ depends on SND_USB_CAIAQ
+ help
+ Say Y here to support input controllers like buttons, knobs,
+ alpha dials and analog pedals on the following products:
+
+ * Native Instruments RigKontrol2
+ * Native Instruments Audio Kontrol 1
+
endmenu
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index 2c1dc11..aa252ef 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -9,4 +9,4 @@
obj-$(CONFIG_SND_USB_AUDIO) += snd-usb-audio.o snd-usb-lib.o
obj-$(CONFIG_SND_USB_USX2Y) += snd-usb-lib.o
-obj-$(CONFIG_SND) += usx2y/
+obj-$(CONFIG_SND) += usx2y/ caiaq/
diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile
new file mode 100644
index 0000000..455c8c5
--- /dev/null
+++ b/sound/usb/caiaq/Makefile
@@ -0,0 +1,3 @@
+snd-usb-caiaq-objs := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-input.o
+
+obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c
new file mode 100644
index 0000000..0414d76
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-audio.c
@@ -0,0 +1,707 @@
+/*
+ * Copyright (c) 2006,2007 Daniel Mack, Karsten Wiese
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <sound/driver.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/spinlock.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+#include <linux/input.h>
+#endif
+
+#include "caiaq-device.h"
+#include "caiaq-audio.h"
+
+#define N_URBS 32
+#define CLOCK_DRIFT_TOLERANCE 5
+#define FRAMES_PER_URB 8
+#define BYTES_PER_FRAME 512
+#define CHANNELS_PER_STREAM 2
+#define BYTES_PER_SAMPLE 3
+#define BYTES_PER_SAMPLE_USB 4
+#define MAX_BUFFER_SIZE (128*1024)
+
+#define ENDPOINT_CAPTURE 2
+#define ENDPOINT_PLAYBACK 6
+
+#define MAKE_CHECKBYTE(dev,stream,i) \
+ (stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
+
+static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S24_3BE,
+ .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_96000),
+ .rate_min = 44100,
+ .rate_max = 0, /* will overwrite later */
+ .channels_min = CHANNELS_PER_STREAM,
+ .channels_max = CHANNELS_PER_STREAM,
+ .buffer_bytes_max = MAX_BUFFER_SIZE,
+ .period_bytes_min = 4096,
+ .period_bytes_max = MAX_BUFFER_SIZE,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+static void
+activate_substream(struct snd_usb_caiaqdev *dev,
+ struct snd_pcm_substream *sub)
+{
+ if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dev->sub_playback[sub->number] = sub;
+ else
+ dev->sub_capture[sub->number] = sub;
+}
+
+static void
+deactivate_substream(struct snd_usb_caiaqdev *dev,
+ struct snd_pcm_substream *sub)
+{
+ if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dev->sub_playback[sub->number] = NULL;
+ else
+ dev->sub_capture[sub->number] = NULL;
+}
+
+static int
+all_substreams_zero(struct snd_pcm_substream **subs)
+{
+ int i;
+ for (i = 0; i < MAX_STREAMS; i++)
+ if (subs[i] != NULL)
+ return 0;
+ return 1;
+}
+
+static int stream_start(struct snd_usb_caiaqdev *dev)
+{
+ int i, ret;
+
+ debug("stream_start(%p)\n", dev);
+ spin_lock_irq(&dev->spinlock);
+ if (dev->streaming) {
+ spin_unlock_irq(&dev->spinlock);
+ return -EINVAL;
+ }
+
+ dev->input_panic = 0;
+ dev->output_panic = 0;
+ dev->first_packet = 1;
+ dev->streaming = 1;
+
+ for (i = 0; i < N_URBS; i++) {
+ ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC);
+ if (ret) {
+ log("unable to trigger initial read #%d! (ret = %d)\n",
+ i, ret);
+ dev->streaming = 0;
+ spin_unlock_irq(&dev->spinlock);
+ return -EPIPE;
+ }
+ }
+
+ spin_unlock_irq(&dev->spinlock);
+ return 0;
+}
+
+static void stream_stop(struct snd_usb_caiaqdev *dev)
+{
+ int i;
+
+ debug("stream_stop(%p)\n", dev);
+ if (!dev->streaming)
+ return;
+
+ dev->streaming = 0;
+ for (i = 0; i < N_URBS; i++) {
+ usb_unlink_urb(dev->data_urbs_in[i]);
+ usb_unlink_urb(dev->data_urbs_out[i]);
+ }
+}
+
+static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+ debug("snd_usb_caiaq_substream_open(%p)\n", substream);
+ substream->runtime->hw = dev->pcm_info;
+ snd_pcm_limit_hw_rates(substream->runtime);
+ return 0;
+}
+
+static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+
+ debug("snd_usb_caiaq_substream_close(%p)\n", substream);
+ if (all_substreams_zero(dev->sub_playback) &&
+ all_substreams_zero(dev->sub_capture)) {
+ /* when the last client has stopped streaming,
+ * all sample rates are allowed again */
+ stream_stop(dev);
+ dev->pcm_info.rates = dev->samplerates;
+ }
+
+ return 0;
+}
+
+static int snd_usb_caiaq_pcm_hw_params(struct snd_pcm_substream *sub,
+ struct snd_pcm_hw_params *hw_params)
+{
+ debug("snd_usb_caiaq_pcm_hw_params(%p)\n", sub);
+ return snd_pcm_lib_malloc_pages(sub, params_buffer_bytes(hw_params));
+}
+
+static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+ debug("snd_usb_caiaq_pcm_hw_free(%p)\n", sub);
+ spin_lock_irq(&dev->spinlock);
+ deactivate_substream(dev, sub);
+ spin_unlock_irq(&dev->spinlock);
+ return snd_pcm_lib_free_pages(sub);
+}
+
+/* this should probably go upstream */
+#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
+#error "Change this table"
+#endif
+
+static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100,
+ 48000, 64000, 88200, 96000, 176400, 192000 };
+
+static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ int bytes_per_sample, bpp, ret, i;
+ int index = substream->number;
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ debug("snd_usb_caiaq_pcm_prepare(%p)\n", substream);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
+ else
+ dev->audio_in_buf_pos[index] = 0;
+
+ if (dev->streaming)
+ return 0;
+
+ /* the first client that opens a stream defines the sample rate
+ * setting for all subsequent calls, until the last client closed. */
+ for (i=0; i < ARRAY_SIZE(rates); i++)
+ if (runtime->rate == rates[i])
+ dev->pcm_info.rates = 1 << i;
+
+ snd_pcm_limit_hw_rates(runtime);
+
+ bytes_per_sample = BYTES_PER_SAMPLE;
+ if (dev->spec.data_alignment == 2)
+ bytes_per_sample++;
+
+ bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
+ * bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
+
+ ret = snd_usb_caiaq_set_audio_params(dev, runtime->rate,
+ runtime->sample_bits, bpp);
+ if (ret)
+ return ret;
+
+ ret = stream_start(dev);
+ if (ret)
+ return ret;
+
+ dev->output_running = 0;
+ wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
+ if (!dev->output_running) {
+ stream_stop(dev);
+ return -EPIPE;
+ }
+
+ return 0;
+}
+
+static int snd_usb_caiaq_pcm_trigger(struct snd_pcm_substream *sub, int cmd)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ spin_lock(&dev->spinlock);
+ activate_substream(dev, sub);
+ spin_unlock(&dev->spinlock);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ spin_lock(&dev->spinlock);
+ deactivate_substream(dev, sub);
+ spin_unlock(&dev->spinlock);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t
+snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
+{
+ int index = sub->number;
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+
+ if (dev->input_panic || dev->output_panic)
+ return SNDRV_PCM_POS_XRUN;
+
+ if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return bytes_to_frames(sub->runtime,
+ dev->audio_out_buf_pos[index]);
+ else
+ return bytes_to_frames(sub->runtime,
+ dev->audio_in_buf_pos[index]);
+}
+
+/* operators for both playback and capture */
+static struct snd_pcm_ops snd_usb_caiaq_ops = {
+ .open = snd_usb_caiaq_substream_open,
+ .close = snd_usb_caiaq_substream_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_usb_caiaq_pcm_hw_params,
+ .hw_free = snd_usb_caiaq_pcm_hw_free,
+ .prepare = snd_usb_caiaq_pcm_prepare,
+ .trigger = snd_usb_caiaq_pcm_trigger,
+ .pointer = snd_usb_caiaq_pcm_pointer
+};
+
+static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
+ struct snd_pcm_substream **subs)
+{
+ int stream, pb, *cnt;
+ struct snd_pcm_substream *sub;
+
+ for (stream = 0; stream < dev->n_streams; stream++) {
+ sub = subs[stream];
+ if (!sub)
+ continue;
+
+ pb = frames_to_bytes(sub->runtime,
+ sub->runtime->period_size);
+ cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+ &dev->period_out_count[stream] :
+ &dev->period_in_count[stream];
+
+ if (*cnt >= pb) {
+ snd_pcm_period_elapsed(sub);
+ *cnt %= pb;
+ }
+ }
+}
+
+static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev,
+ const struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+ struct snd_pcm_substream *sub;
+ int stream, i;
+
+ if (all_substreams_zero(dev->sub_capture))
+ return;
+
+ spin_lock(&dev->spinlock);
+
+ for (i = 0; i < iso->actual_length;) {
+ for (stream = 0; stream < dev->n_streams; stream++, i++) {
+ sub = dev->sub_capture[stream];
+ if (sub) {
+ struct snd_pcm_runtime *rt = sub->runtime;
+ char *audio_buf = rt->dma_area;
+ int sz = frames_to_bytes(rt, rt->buffer_size);
+ audio_buf[dev->audio_in_buf_pos[stream]++]
+ = usb_buf[i];
+ dev->period_in_count[stream]++;
+ if (dev->audio_in_buf_pos[stream] == sz)
+ dev->audio_in_buf_pos[stream] = 0;
+ }
+ }
+ }
+
+ spin_unlock(&dev->spinlock);
+}
+
+static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
+ const struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+ unsigned char check_byte;
+ struct snd_pcm_substream *sub;
+ int stream, i;
+
+ spin_lock(&dev->spinlock);
+
+ for (i = 0; i < iso->actual_length;) {
+ if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
+ for (stream = 0;
+ stream < dev->n_streams;
+ stream++, i++) {
+ if (dev->first_packet)
+ continue;
+
+ check_byte = MAKE_CHECKBYTE(dev, stream, i);
+
+ if ((usb_buf[i] & 0x3f) != check_byte)
+ dev->input_panic = 1;
+
+ if (usb_buf[i] & 0x80)
+ dev->output_panic = 1;
+ }
+ }
+ dev->first_packet = 0;
+
+ for (stream = 0; stream < dev->n_streams; stream++, i++) {
+ sub = dev->sub_capture[stream];
+ if (sub) {
+ struct snd_pcm_runtime *rt = sub->runtime;
+ char *audio_buf = rt->dma_area;
+ int sz = frames_to_bytes(rt, rt->buffer_size);
+ audio_buf[dev->audio_in_buf_pos[stream]++] =
+ usb_buf[i];
+ dev->period_in_count[stream]++;
+ if (dev->audio_in_buf_pos[stream] == sz)
+ dev->audio_in_buf_pos[stream] = 0;
+ }
+ }
+ }
+
+ spin_unlock(&dev->spinlock);
+}
+
+static void read_in_urb(struct snd_usb_caiaqdev *dev,
+ const struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ if (!dev->streaming)
+ return;
+
+ switch (dev->spec.data_alignment) {
+ case 0:
+ read_in_urb_mode0(dev, urb, iso);
+ break;
+ case 2:
+ read_in_urb_mode2(dev, urb, iso);
+ break;
+ }
+
+ if (dev->input_panic || dev->output_panic) {
+ debug("streaming error detected %s %s\n",
+ dev->input_panic ? "(input)" : "",
+ dev->output_panic ? "(output)" : "");
+ }
+
+ check_for_elapsed_periods(dev, dev->sub_capture);
+}
+
+static void fill_out_urb(struct snd_usb_caiaqdev *dev,
+ struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+ struct snd_pcm_substream *sub;
+ int stream, i;
+
+ spin_lock(&dev->spinlock);
+
+ for (i = 0; i < iso->length;) {
+ for (stream = 0; stream < dev->n_streams; stream++, i++) {
+ sub = dev->sub_playback[stream];
+ if (sub) {
+ struct snd_pcm_runtime *rt = sub->runtime;
+ char *audio_buf = rt->dma_area;
+ int sz = frames_to_bytes(rt, rt->buffer_size);
+ usb_buf[i] =
+ audio_buf[dev->audio_out_buf_pos[stream]];
+ dev->period_out_count[stream]++;
+ dev->audio_out_buf_pos[stream]++;
+ if (dev->audio_out_buf_pos[stream] == sz)
+ dev->audio_out_buf_pos[stream] = 0;
+ } else
+ usb_buf[i] = 0;
+ }
+
+ /* fill in the check bytes */
+ if (dev->spec.data_alignment == 2 &&
+ i % (dev->n_streams * BYTES_PER_SAMPLE_USB) ==
+ (dev->n_streams * CHANNELS_PER_STREAM))
+ for (stream = 0; stream < dev->n_streams; stream++, i++)
+ usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
+ }
+
+ spin_unlock(&dev->spinlock);
+ check_for_elapsed_periods(dev, dev->sub_playback);
+}
+
+static void read_completed(struct urb *urb)
+{
+ struct snd_usb_caiaq_cb_info *info = urb->context;
+ struct snd_usb_caiaqdev *dev;
+ struct urb *out;
+ int frame, len, send_it = 0, outframe = 0;
+
+ if (urb->status || !info)
+ return;
+
+ dev = info->dev;
+ if (!dev->streaming)
+ return;
+
+ out = dev->data_urbs_out[info->index];
+
+ /* read the recently received packet and send back one which has
+ * the same layout */
+ for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+ if (urb->iso_frame_desc[frame].status)
+ continue;
+
+ len = urb->iso_frame_desc[outframe].actual_length;
+ out->iso_frame_desc[outframe].length = len;
+ out->iso_frame_desc[outframe].actual_length = 0;
+ out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
+
+ if (len > 0) {
+ fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
+ read_in_urb(dev, urb, &urb->iso_frame_desc[frame]);
+ send_it = 1;
+ }
+
+ outframe++;
+ }
+
+ if (send_it) {
+ out->number_of_packets = FRAMES_PER_URB;
+ out->transfer_flags = URB_ISO_ASAP;
+ usb_submit_urb(out, GFP_ATOMIC);
+ }
+
+ /* re-submit inbound urb */
+ for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+ urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
+ urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
+ urb->iso_frame_desc[frame].actual_length = 0;
+ }
+
+ urb->number_of_packets = FRAMES_PER_URB;
+ urb->transfer_flags = URB_ISO_ASAP;
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void write_completed(struct urb *urb)
+{
+ struct snd_usb_caiaq_cb_info *info = urb->context;
+ struct snd_usb_caiaqdev *dev = info->dev;
+
+ if (!dev->output_running) {
+ dev->output_running = 1;
+ wake_up(&dev->prepare_wait_queue);
+ }
+}
+
+static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
+{
+ int i, frame;
+ struct urb **urbs;
+ struct usb_device *usb_dev = dev->chip.dev;
+ unsigned int pipe;
+
+ pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ?
+ usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
+ usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
+
+ urbs = kmalloc(N_URBS * sizeof(*urbs), GFP_KERNEL);
+ if (!urbs) {
+ log("unable to kmalloc() urbs, OOM!?\n");
+ *ret = -ENOMEM;
+ return NULL;
+ }
+
+ for (i = 0; i < N_URBS; i++) {
+ urbs[i] = usb_alloc_urb(FRAMES_PER_URB, GFP_KERNEL);
+ if (!urbs[i]) {
+ log("unable to usb_alloc_urb(), OOM!?\n");
+ *ret = -ENOMEM;
+ return urbs;
+ }
+
+ urbs[i]->transfer_buffer =
+ kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
+ if (!urbs[i]->transfer_buffer) {
+ log("unable to kmalloc() transfer buffer, OOM!?\n");
+ *ret = -ENOMEM;
+ return urbs;
+ }
+
+ for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+ struct usb_iso_packet_descriptor *iso =
+ &urbs[i]->iso_frame_desc[frame];
+
+ iso->offset = BYTES_PER_FRAME * frame;
+ iso->length = BYTES_PER_FRAME;
+ }
+
+ urbs[i]->dev = usb_dev;
+ urbs[i]->pipe = pipe;
+ urbs[i]->transfer_buffer_length = FRAMES_PER_URB
+ * BYTES_PER_FRAME;
+ urbs[i]->context = &dev->data_cb_info[i];
+ urbs[i]->interval = 1;
+ urbs[i]->transfer_flags = URB_ISO_ASAP;
+ urbs[i]->number_of_packets = FRAMES_PER_URB;
+ urbs[i]->complete = (dir == SNDRV_PCM_STREAM_CAPTURE) ?
+ read_completed : write_completed;
+ }
+
+ *ret = 0;
+ return urbs;
+}
+
+static void free_urbs(struct urb **urbs)
+{
+ int i;
+
+ if (!urbs)
+ return;
+
+ for (i = 0; i < N_URBS; i++) {
+ if (!urbs[i])
+ continue;
+
+ usb_kill_urb(urbs[i]);
+ kfree(urbs[i]->transfer_buffer);
+ usb_free_urb(urbs[i]);
+ }
+
+ kfree(urbs);
+}
+
+int __devinit snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
+{
+ int i, ret;
+
+ dev->n_audio_in = max(dev->spec.num_analog_audio_in,
+ dev->spec.num_digital_audio_in) /
+ CHANNELS_PER_STREAM;
+ dev->n_audio_out = max(dev->spec.num_analog_audio_out,
+ dev->spec.num_digital_audio_out) /
+ CHANNELS_PER_STREAM;
+ dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
+
+ debug("dev->n_audio_in = %d\n", dev->n_audio_in);
+ debug("dev->n_audio_out = %d\n", dev->n_audio_out);
+ debug("dev->n_streams = %d\n", dev->n_streams);
+
+ if (dev->n_streams > MAX_STREAMS) {
+ log("unable to initialize device, too many streams.\n");
+ return -EINVAL;
+ }
+
+ ret = snd_pcm_new(dev->chip.card, dev->product_name, 0,
+ dev->n_audio_out, dev->n_audio_in, &dev->pcm);
+
+ if (ret < 0) {
+ log("snd_pcm_new() returned %d\n", ret);
+ return ret;
+ }
+
+ dev->pcm->private_data = dev;
+ strcpy(dev->pcm->name, dev->product_name);
+
+ memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
+ memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
+
+ memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
+ sizeof(snd_usb_caiaq_pcm_hardware));
+
+ /* setup samplerates */
+ dev->samplerates = dev->pcm_info.rates;
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ dev->samplerates |= SNDRV_PCM_RATE_88200;
+ dev->samplerates |= SNDRV_PCM_RATE_192000;
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+ dev->samplerates |= SNDRV_PCM_RATE_88200;
+ break;
+ }
+
+ snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_usb_caiaq_ops);
+ snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_usb_caiaq_ops);
+
+ snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
+
+ dev->data_cb_info =
+ kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS,
+ GFP_KERNEL);
+
+ if (!dev->data_cb_info)
+ return -ENOMEM;
+
+ for (i = 0; i < N_URBS; i++) {
+ dev->data_cb_info[i].dev = dev;
+ dev->data_cb_info[i].index = i;
+ }
+
+ dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
+ if (ret < 0) {
+ kfree(dev->data_cb_info);
+ free_urbs(dev->data_urbs_in);
+ return ret;
+ }
+
+ dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
+ if (ret < 0) {
+ kfree(dev->data_cb_info);
+ free_urbs(dev->data_urbs_in);
+ free_urbs(dev->data_urbs_out);
+ return ret;
+ }
+
+ return 0;
+}
+
+void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev)
+{
+ debug("snd_usb_caiaq_audio_free (%p)\n", dev);
+ stream_stop(dev);
+ free_urbs(dev->data_urbs_in);
+ free_urbs(dev->data_urbs_out);
+ kfree(dev->data_cb_info);
+}
+
diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/caiaq-audio.h
new file mode 100644
index 0000000..8ab1f8d
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-audio.h
@@ -0,0 +1,7 @@
+#ifndef CAIAQ_AUDIO_H
+#define CAIAQ_AUDIO_H
+
+int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev);
+
+#endif /* CAIAQ_AUDIO_H */
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
new file mode 100644
index 0000000..4709347
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -0,0 +1,436 @@
+/*
+ * caiaq.c: ALSA driver for caiaq/NativeInstruments devices
+ *
+ * Copyright (c) 2007 Daniel Mack <daniel@caiaq.de>
+ * Karsten Wiese <fzu@wemgehoertderstaat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+
+#include "caiaq-device.h"
+#include "caiaq-audio.h"
+#include "caiaq-midi.h"
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+#include "caiaq-input.h"
+#endif
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.1.0");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
+ "{Native Instruments, Kore Controller},"
+ "{Native Instruments, Audio Kontrol 1}"
+ "{Native Instruments, Audio 8 DJ}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
+static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
+static int snd_card_used[SNDRV_CARDS];
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for the caiaq sound device");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for the caiaq soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable the caiaq soundcard.");
+
+enum {
+ SAMPLERATE_44100 = 0,
+ SAMPLERATE_48000 = 1,
+ SAMPLERATE_96000 = 2,
+ SAMPLERATE_192000 = 3,
+ SAMPLERATE_88200 = 4,
+ SAMPLERATE_INVALID = 0xff
+};
+
+enum {
+ DEPTH_NONE = 0,
+ DEPTH_16 = 1,
+ DEPTH_24 = 2,
+ DEPTH_32 = 3
+};
+
+static struct usb_device_id snd_usb_id_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_RIGKONTROL2
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_KORECONTROLLER
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AK1
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AUDIO8DJ
+ },
+ { /* terminator */ }
+};
+
+static void usb_ep1_command_reply_dispatch (struct urb* urb)
+{
+ int ret;
+ struct snd_usb_caiaqdev *dev = urb->context;
+ unsigned char *buf = urb->transfer_buffer;
+
+ if (urb->status || !dev) {
+ log("received EP1 urb->status = %i\n", urb->status);
+ return;
+ }
+
+ switch(buf[0]) {
+ case EP1_CMD_GET_DEVICE_INFO:
+ memcpy(&dev->spec, buf+1, sizeof(struct caiaq_device_spec));
+ dev->spec.fw_version = le16_to_cpu(dev->spec.fw_version);
+ debug("device spec (firmware %d): audio: %d in, %d out, "
+ "MIDI: %d in, %d out, data alignment %d\n",
+ dev->spec.fw_version,
+ dev->spec.num_analog_audio_in,
+ dev->spec.num_analog_audio_out,
+ dev->spec.num_midi_in,
+ dev->spec.num_midi_out,
+ dev->spec.data_alignment);
+
+ dev->spec_received++;
+ wake_up(&dev->ep1_wait_queue);
+ break;
+ case EP1_CMD_AUDIO_PARAMS:
+ dev->audio_parm_answer = buf[1];
+ wake_up(&dev->ep1_wait_queue);
+ break;
+ case EP1_CMD_MIDI_READ:
+ snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]);
+ break;
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ case EP1_CMD_READ_ERP:
+ case EP1_CMD_READ_ANALOG:
+ case EP1_CMD_READ_IO:
+ snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length);
+ break;
+#endif
+ }
+
+ dev->ep1_in_urb.actual_length = 0;
+ ret = usb_submit_urb(&dev->ep1_in_urb, GFP_ATOMIC);
+ if (ret < 0)
+ log("unable to submit urb. OOM!?\n");
+}
+
+static int send_command (struct snd_usb_caiaqdev *dev,
+ unsigned char command,
+ const unsigned char *buffer,
+ int len)
+{
+ int actual_len;
+ struct usb_device *usb_dev = dev->chip.dev;
+
+ if (!usb_dev)
+ return -EIO;
+
+ if (len > EP1_BUFSIZE - 1)
+ len = EP1_BUFSIZE - 1;
+
+ if (buffer && len > 0)
+ memcpy(dev->ep1_out_buf+1, buffer, len);
+
+ dev->ep1_out_buf[0] = command;
+ return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
+ dev->ep1_out_buf, len+1, &actual_len, 200);
+}
+
+int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
+ int rate, int depth, int bpp)
+{
+ int ret;
+ char tmp[5];
+
+ switch (rate) {
+ case 44100: tmp[0] = SAMPLERATE_44100; break;
+ case 48000: tmp[0] = SAMPLERATE_48000; break;
+ case 88200: tmp[0] = SAMPLERATE_88200; break;
+ case 96000: tmp[0] = SAMPLERATE_96000; break;
+ case 192000: tmp[0] = SAMPLERATE_192000; break;
+ default: return -EINVAL;
+ }
+
+ switch (depth) {
+ case 16: tmp[1] = DEPTH_16; break;
+ case 24: tmp[1] = DEPTH_24; break;
+ default: return -EINVAL;
+ }
+
+ tmp[2] = bpp & 0xff;
+ tmp[3] = bpp >> 8;
+ tmp[4] = 1; /* packets per microframe */
+
+ debug("setting audio params: %d Hz, %d bits, %d bpp\n",
+ rate, depth, bpp);
+
+ dev->audio_parm_answer = -1;
+ ret = send_command(dev, EP1_CMD_AUDIO_PARAMS, tmp, sizeof(tmp));
+
+ if (ret)
+ return ret;
+
+ if (!wait_event_timeout(dev->ep1_wait_queue,
+ dev->audio_parm_answer >= 0, HZ))
+ return -EPIPE;
+
+ if (dev->audio_parm_answer != 1)
+ debug("unable to set the device's audio params\n");
+
+ return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
+}
+
+int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev,
+ int digital, int analog, int erp)
+{
+ char tmp[3] = { digital, analog, erp };
+ return send_command(dev, EP1_CMD_AUTO_MSG, tmp, sizeof(tmp));
+}
+
+static void setup_card(struct snd_usb_caiaqdev *dev)
+{
+ int ret;
+ char val[3];
+
+ /* device-specific startup specials */
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+ /* RigKontrol2 - display centered dash ('-') */
+ val[0] = 0x00;
+ val[1] = 0x00;
+ val[2] = 0x01;
+ send_command(dev, EP1_CMD_WRITE_IO, val, 3);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ /* Audio Kontrol 1 - make USB-LED stop blinking */
+ val[0] = 0x00;
+ send_command(dev, EP1_CMD_WRITE_IO, val, 1);
+ break;
+ }
+
+ ret = snd_usb_caiaq_audio_init(dev);
+ if (ret < 0)
+ log("Unable to set up audio system (ret=%d)\n", ret);
+
+ ret = snd_usb_caiaq_midi_init(dev);
+ if (ret < 0)
+ log("Unable to set up MIDI system (ret=%d)\n", ret);
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ ret = snd_usb_caiaq_input_init(dev);
+ if (ret < 0)
+ log("Unable to set up input system (ret=%d)\n", ret);
+#endif
+
+ /* finally, register the card and all its sub-instances */
+ ret = snd_card_register(dev->chip.card);
+ if (ret < 0) {
+ log("snd_card_register() returned %d\n", ret);
+ snd_card_free(dev->chip.card);
+ }
+}
+
+static struct snd_card* create_card(struct usb_device* usb_dev)
+{
+ int devnum;
+ struct snd_card *card;
+ struct snd_usb_caiaqdev *dev;
+
+ for (devnum = 0; devnum < SNDRV_CARDS; devnum++)
+ if (enable[devnum] && !snd_card_used[devnum])
+ break;
+
+ if (devnum >= SNDRV_CARDS)
+ return NULL;
+
+ card = snd_card_new(index[devnum], id[devnum], THIS_MODULE,
+ sizeof(struct snd_usb_caiaqdev));
+ if (!card)
+ return NULL;
+
+ dev = caiaqdev(card);
+ dev->chip.dev = usb_dev;
+ dev->chip.card = card;
+ dev->chip.usb_id = USB_ID(usb_dev->descriptor.idVendor,
+ usb_dev->descriptor.idProduct);
+ spin_lock_init(&dev->spinlock);
+ snd_card_set_dev(card, &usb_dev->dev);
+
+ return card;
+}
+
+static int init_card(struct snd_usb_caiaqdev *dev)
+{
+ char *c;
+ struct usb_device *usb_dev = dev->chip.dev;
+ struct snd_card *card = dev->chip.card;
+ int err, len;
+
+ if (usb_set_interface(usb_dev, 0, 1) != 0) {
+ log("can't set alt interface.\n");
+ return -EIO;
+ }
+
+ usb_init_urb(&dev->ep1_in_urb);
+ usb_init_urb(&dev->midi_out_urb);
+
+ usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
+ usb_rcvbulkpipe(usb_dev, 0x1),
+ dev->ep1_in_buf, EP1_BUFSIZE,
+ usb_ep1_command_reply_dispatch, dev);
+
+ usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, 0x1),
+ dev->midi_out_buf, EP1_BUFSIZE,
+ snd_usb_caiaq_midi_output_done, dev);
+
+ init_waitqueue_head(&dev->ep1_wait_queue);
+ init_waitqueue_head(&dev->prepare_wait_queue);
+
+ if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
+ return -EIO;
+
+ err = send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
+ if (err)
+ return err;
+
+ if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ))
+ return -ENODEV;
+
+ usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+ dev->vendor_name, CAIAQ_USB_STR_LEN);
+
+ usb_string(usb_dev, usb_dev->descriptor.iProduct,
+ dev->product_name, CAIAQ_USB_STR_LEN);
+
+ usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+ dev->serial, CAIAQ_USB_STR_LEN);
+
+ /* terminate serial string at first white space occurence */
+ c = strchr(dev->serial, ' ');
+ if (c)
+ *c = '\0';
+
+ strcpy(card->driver, MODNAME);
+ strcpy(card->shortname, dev->product_name);
+
+ len = snprintf(card->longname, sizeof(card->longname),
+ "%s %s (serial %s, ",
+ dev->vendor_name, dev->product_name, dev->serial);
+
+ if (len < sizeof(card->longname) - 2)
+ len += usb_make_path(usb_dev, card->longname + len,
+ sizeof(card->longname) - len);
+
+ card->longname[len++] = ')';
+ card->longname[len] = '\0';
+ setup_card(dev);
+ return 0;
+}
+
+static int snd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct snd_card *card;
+ struct usb_device *device = interface_to_usbdev(intf);
+
+ card = create_card(device);
+
+ if (!card)
+ return -ENOMEM;
+
+ dev_set_drvdata(&intf->dev, card);
+ ret = init_card(caiaqdev(card));
+ if (ret < 0) {
+ log("unable to init card! (ret=%d)\n", ret);
+ snd_card_free(card);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void snd_disconnect(struct usb_interface *intf)
+{
+ struct snd_usb_caiaqdev *dev;
+ struct snd_card *card = dev_get_drvdata(&intf->dev);
+
+ debug("snd_disconnect(%p)\n", intf);
+
+ if (!card)
+ return;
+
+ dev = caiaqdev(card);
+ snd_card_disconnect(card);
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ snd_usb_caiaq_input_free(dev);
+#endif
+ snd_usb_caiaq_audio_free(dev);
+
+ usb_kill_urb(&dev->ep1_in_urb);
+ usb_kill_urb(&dev->midi_out_urb);
+
+ snd_card_free(card);
+ usb_reset_device(interface_to_usbdev(intf));
+}
+
+
+MODULE_DEVICE_TABLE(usb, snd_usb_id_table);
+static struct usb_driver snd_usb_driver = {
+ .name = MODNAME,
+ .probe = snd_probe,
+ .disconnect = snd_disconnect,
+ .id_table = snd_usb_id_table,
+};
+
+static int __init snd_module_init(void)
+{
+ return usb_register(&snd_usb_driver);
+}
+
+static void __exit snd_module_exit(void)
+{
+ usb_deregister(&snd_usb_driver);
+}
+
+module_init(snd_module_init)
+module_exit(snd_module_exit)
+
diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h
new file mode 100644
index 0000000..088d5ec
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-device.h
@@ -0,0 +1,116 @@
+#ifndef CAIAQ_DEVICE_H
+#define CAIAQ_DEVICE_H
+
+#include "../usbaudio.h"
+
+#define USB_VID_NATIVEINSTRUMENTS 0x17cc
+
+#define USB_PID_RIGKONTROL2 0x1969
+#define USB_PID_KORECONTROLLER 0x4711
+#define USB_PID_AK1 0x0815
+#define USB_PID_AUDIO8DJ 0x1978
+
+#define EP1_BUFSIZE 64
+#define CAIAQ_USB_STR_LEN 0xff
+#define MAX_STREAMS 32
+
+//#define SND_USB_CAIAQ_DEBUG
+
+#define MODNAME "snd-usb-caiaq"
+#define log(x...) snd_printk(KERN_WARNING MODNAME" log: " x)
+
+#ifdef SND_USB_CAIAQ_DEBUG
+#define debug(x...) snd_printk(KERN_WARNING MODNAME " debug: " x)
+#else
+#define debug(x...) do { } while(0)
+#endif
+
+#define EP1_CMD_GET_DEVICE_INFO 0x1
+#define EP1_CMD_READ_ERP 0x2
+#define EP1_CMD_READ_ANALOG 0x3
+#define EP1_CMD_READ_IO 0x4
+#define EP1_CMD_WRITE_IO 0x5
+#define EP1_CMD_MIDI_READ 0x6
+#define EP1_CMD_MIDI_WRITE 0x7
+#define EP1_CMD_AUDIO_PARAMS 0x9
+#define EP1_CMD_AUTO_MSG 0xb
+
+struct caiaq_device_spec {
+ unsigned short fw_version;
+ unsigned char hw_subtype;
+ unsigned char num_erp;
+ unsigned char num_analog_in;
+ unsigned char num_digital_in;
+ unsigned char num_digital_out;
+ unsigned char num_analog_audio_out;
+ unsigned char num_analog_audio_in;
+ unsigned char num_digital_audio_out;
+ unsigned char num_digital_audio_in;
+ unsigned char num_midi_out;
+ unsigned char num_midi_in;
+ unsigned char data_alignment;
+} __attribute__ ((packed));
+
+struct snd_usb_caiaq_cb_info;
+
+struct snd_usb_caiaqdev {
+ struct snd_usb_audio chip;
+
+ struct urb ep1_in_urb;
+ struct urb midi_out_urb;
+ struct urb **data_urbs_in;
+ struct urb **data_urbs_out;
+ struct snd_usb_caiaq_cb_info *data_cb_info;
+
+ unsigned char ep1_in_buf[EP1_BUFSIZE];
+ unsigned char ep1_out_buf[EP1_BUFSIZE];
+ unsigned char midi_out_buf[EP1_BUFSIZE];
+
+ struct caiaq_device_spec spec;
+ spinlock_t spinlock;
+ wait_queue_head_t ep1_wait_queue;
+ wait_queue_head_t prepare_wait_queue;
+ int spec_received, audio_parm_answer;
+
+ char vendor_name[CAIAQ_USB_STR_LEN];
+ char product_name[CAIAQ_USB_STR_LEN];
+ char serial[CAIAQ_USB_STR_LEN];
+
+ int n_streams, n_audio_in, n_audio_out;
+ int streaming, first_packet, output_running;
+ int audio_in_buf_pos[MAX_STREAMS];
+ int audio_out_buf_pos[MAX_STREAMS];
+ int period_in_count[MAX_STREAMS];
+ int period_out_count[MAX_STREAMS];
+ int input_panic, output_panic;
+ char *audio_in_buf, *audio_out_buf;
+ unsigned int samplerates;
+
+ struct snd_pcm_substream *sub_playback[MAX_STREAMS];
+ struct snd_pcm_substream *sub_capture[MAX_STREAMS];
+
+ /* Linux input */
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ struct input_dev *input_dev;
+#endif
+
+ /* ALSA */
+ struct snd_pcm *pcm;
+ struct snd_pcm_hardware pcm_info;
+ struct snd_rawmidi *rmidi;
+ struct snd_rawmidi_substream *midi_receive_substream;
+ struct snd_rawmidi_substream *midi_out_substream;
+};
+
+struct snd_usb_caiaq_cb_info {
+ struct snd_usb_caiaqdev *dev;
+ int index;
+};
+
+#define caiaqdev(c) ((struct snd_usb_caiaqdev*)(c)->private_data)
+
+int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, int rate, int depth, int bbp);
+int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, int digital, int analog, int erp);
+
+
+#endif /* CAIAQ_DEVICE_H */
diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/caiaq-input.c
new file mode 100644
index 0000000..3acd12d
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-input.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/spinlock.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+#include <sound/pcm.h>
+#include "caiaq-device.h"
+#include "caiaq-input.h"
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+
+static unsigned char keycode_ak1[] = { KEY_C, KEY_B, KEY_A };
+static unsigned char keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
+ KEY_5, KEY_6, KEY_7 };
+
+#define DEG90 (range/2)
+#define DEG180 (range)
+#define DEG270 (DEG90 + DEG180)
+#define DEG360 (DEG180 * 2)
+#define HIGH_PEAK (268)
+#define LOW_PEAK (-7)
+
+/* some of these devices have endless rotation potentiometers
+ * built in which use two tapers, 90 degrees phase shifted.
+ * this algorithm decodes them to one single value, ranging
+ * from 0 to 999 */
+static unsigned int decode_erp(unsigned char a, unsigned char b)
+{
+ int weight_a, weight_b;
+ int pos_a, pos_b;
+ int ret;
+ int range = HIGH_PEAK - LOW_PEAK;
+ int mid_value = (HIGH_PEAK + LOW_PEAK) / 2;
+
+ weight_b = abs(mid_value-a) - (range/2 - 100)/2;
+
+ if (weight_b < 0)
+ weight_b = 0;
+
+ if (weight_b > 100)
+ weight_b = 100;
+
+ weight_a = 100 - weight_b;
+
+ if (a < mid_value) {
+ /* 0..90 and 270..360 degrees */
+ pos_b = b - LOW_PEAK + DEG270;
+ if (pos_b >= DEG360)
+ pos_b -= DEG360;
+ } else
+ /* 90..270 degrees */
+ pos_b = HIGH_PEAK - b + DEG90;
+
+
+ if (b > mid_value)
+ /* 0..180 degrees */
+ pos_a = a - LOW_PEAK;
+ else
+ /* 180..360 degrees */
+ pos_a = HIGH_PEAK - a + DEG180;
+
+ /* interpolate both slider values, depending on weight factors */
+ /* 0..99 x DEG360 */
+ ret = pos_a * weight_a + pos_b * weight_b;
+
+ /* normalize to 0..999 */
+ ret *= 10;
+ ret /= DEG360;
+
+ if (ret < 0)
+ ret += 1000;
+
+ if (ret >= 1000)
+ ret -= 1000;
+
+ return ret;
+}
+
+#undef DEG90
+#undef DEG180
+#undef DEG270
+#undef DEG360
+#undef HIGH_PEAK
+#undef LOW_PEAK
+
+
+static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev,
+ const char *buf, unsigned int len)
+{
+ switch(dev->input_dev->id.product) {
+ case USB_PID_RIGKONTROL2:
+ input_report_abs(dev->input_dev, ABS_X, (buf[4] << 8) |buf[5]);
+ input_report_abs(dev->input_dev, ABS_Y, (buf[0] << 8) |buf[1]);
+ input_report_abs(dev->input_dev, ABS_Z, (buf[2] << 8) |buf[3]);
+ input_sync(dev->input_dev);
+ break;
+ }
+}
+
+static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
+ const char *buf, unsigned int len)
+{
+ int i;
+
+ switch(dev->input_dev->id.product) {
+ case USB_PID_AK1:
+ i = decode_erp(buf[0], buf[1]);
+ input_report_abs(dev->input_dev, ABS_X, i);
+ input_sync(dev->input_dev);
+ break;
+ }
+}
+
+static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev,
+ char *buf, unsigned int len)
+{
+ int i;
+ unsigned char *keycode = dev->input_dev->keycode;
+
+ if (!keycode)
+ return;
+
+ if (dev->input_dev->id.product == USB_PID_RIGKONTROL2)
+ for (i=0; i<len; i++)
+ buf[i] = ~buf[i];
+
+ for (i=0; (i<dev->input_dev->keycodemax) && (i < len); i++)
+ input_report_key(dev->input_dev, keycode[i],
+ buf[i/8] & (1 << (i%8)));
+
+ input_sync(dev->input_dev);
+}
+
+void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev,
+ char *buf,
+ unsigned int len)
+{
+ if (!dev->input_dev || (len < 1))
+ return;
+
+ switch (buf[0]) {
+ case EP1_CMD_READ_ANALOG:
+ snd_caiaq_input_read_analog(dev, buf+1, len-1);
+ break;
+ case EP1_CMD_READ_ERP:
+ snd_caiaq_input_read_erp(dev, buf+1, len-1);
+ break;
+ case EP1_CMD_READ_IO:
+ snd_caiaq_input_read_io(dev, buf+1, len-1);
+ break;
+ }
+}
+
+int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
+{
+ struct usb_device *usb_dev = dev->chip.dev;
+ struct input_dev *input;
+ int i, ret;
+
+ input = input_allocate_device();
+ if (!input)
+ return -ENOMEM;
+
+ input->name = dev->product_name;
+ input->id.bustype = BUS_USB;
+ input->id.vendor = usb_dev->descriptor.idVendor;
+ input->id.product = usb_dev->descriptor.idProduct;
+ input->id.version = usb_dev->descriptor.bcdDevice;
+
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+ input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_Z);
+ input->keycode = keycode_rk2;
+ input->keycodesize = sizeof(char);
+ input->keycodemax = ARRAY_SIZE(keycode_rk2);
+ for (i=0; i<ARRAY_SIZE(keycode_rk2); i++)
+ set_bit(keycode_rk2[i], input->keybit);
+
+ input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
+ snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ input->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input->absbit[0] = BIT(ABS_X);
+ input->keycode = keycode_ak1;
+ input->keycodesize = sizeof(char);
+ input->keycodemax = ARRAY_SIZE(keycode_ak1);
+ for (i=0; i<ARRAY_SIZE(keycode_ak1); i++)
+ set_bit(keycode_ak1[i], input->keybit);
+
+ input_set_abs_params(input, ABS_X, 0, 999, 0, 10);
+ snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5);
+ break;
+ default:
+ /* no input methods supported on this device */
+ input_free_device(input);
+ return 0;
+ }
+
+ ret = input_register_device(input);
+ if (ret < 0) {
+ input_free_device(input);
+ return ret;
+ }
+
+ dev->input_dev = input;
+ return 0;
+}
+
+void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
+{
+ if (!dev || !dev->input_dev)
+ return;
+
+ input_unregister_device(dev->input_dev);
+ input_free_device(dev->input_dev);
+ dev->input_dev = NULL;
+}
+
+#endif /* CONFIG_SND_USB_CAIAQ_INPUT */
+
diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/caiaq-input.h
new file mode 100644
index 0000000..ced5355
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-input.h
@@ -0,0 +1,8 @@
+#ifndef CAIAQ_INPUT_H
+#define CAIAQ_INPUT_H
+
+void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, char *buf, unsigned int len);
+int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev);
+
+#endif
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/caiaq-midi.c
new file mode 100644
index 0000000..793ca20
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-midi.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2006,2007 Daniel Mack
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+#include <sound/pcm.h>
+
+#include "caiaq-device.h"
+#include "caiaq-midi.h"
+
+
+static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static int snd_usb_caiaq_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+
+ if (!dev)
+ return;
+
+ dev->midi_receive_substream = up ? substream : NULL;
+}
+
+
+static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
+ struct snd_rawmidi_substream *substream)
+{
+ int len, ret;
+
+ dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
+ dev->midi_out_buf[1] = 0; /* port */
+ len = snd_rawmidi_transmit_peek(substream, dev->midi_out_buf+3, EP1_BUFSIZE-3);
+
+ if (len <= 0)
+ return;
+
+ dev->midi_out_buf[2] = len;
+ dev->midi_out_urb.transfer_buffer_length = len+3;
+
+ ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
+ if (ret < 0)
+ log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed, %d\n",
+ substream, ret);
+}
+
+static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+
+ if (dev->midi_out_substream != NULL)
+ return;
+
+ if (!up) {
+ dev->midi_out_substream = NULL;
+ return;
+ }
+
+ dev->midi_out_substream = substream;
+ snd_usb_caiaq_midi_send(dev, substream);
+}
+
+
+static struct snd_rawmidi_ops snd_usb_caiaq_midi_output =
+{
+ .open = snd_usb_caiaq_midi_output_open,
+ .close = snd_usb_caiaq_midi_output_close,
+ .trigger = snd_usb_caiaq_midi_output_trigger,
+};
+
+static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
+{
+ .open = snd_usb_caiaq_midi_input_open,
+ .close = snd_usb_caiaq_midi_input_close,
+ .trigger = snd_usb_caiaq_midi_input_trigger,
+};
+
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
+ int port, const char *buf, int len)
+{
+ if (!dev->midi_receive_substream)
+ return;
+
+ snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
+}
+
+int __devinit snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
+{
+ int ret;
+ struct snd_rawmidi *rmidi;
+
+ ret = snd_rawmidi_new(device->chip.card, device->product_name, 0,
+ device->spec.num_midi_out,
+ device->spec.num_midi_in,
+ &rmidi);
+
+ if (ret < 0)
+ return ret;
+
+ strcpy(rmidi->name, device->product_name);
+
+ rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
+ rmidi->private_data = device;
+
+ if (device->spec.num_midi_out > 0) {
+ rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
+ snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+ &snd_usb_caiaq_midi_output);
+ }
+
+ if (device->spec.num_midi_in > 0) {
+ rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
+ snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+ &snd_usb_caiaq_midi_input);
+ }
+
+ device->rmidi = rmidi;
+
+ return 0;
+}
+
+void snd_usb_caiaq_midi_output_done(struct urb* urb)
+{
+ struct snd_usb_caiaqdev *dev = urb->context;
+ char *buf = urb->transfer_buffer;
+
+ if (urb->status != 0)
+ return;
+
+ if (!dev->midi_out_substream)
+ return;
+
+ snd_rawmidi_transmit_ack(dev->midi_out_substream, buf[2]);
+ dev->midi_out_substream = NULL;
+ snd_usb_caiaq_midi_send(dev, dev->midi_out_substream);
+}
+
diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/caiaq-midi.h
new file mode 100644
index 0000000..9d16db0
--- /dev/null
+++ b/sound/usb/caiaq/caiaq-midi.h
@@ -0,0 +1,8 @@
+#ifndef CAIAQ_MIDI_H
+#define CAIAQ_MIDI_H
+
+int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
+void snd_usb_caiaq_midi_output_done(struct urb* urb);
+
+#endif /* CAIAQ_MIDI_H */
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index b6d8863..8ebc1ad 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -1878,6 +1878,9 @@
}
/* set the period time minimum 1ms */
+ /* FIXME: high-speed mode allows 125us minimum period, but many parts
+ * in the current code assume the 1ms period.
+ */
snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME,
1000 * MIN_PACKS_URB,
/*(nrpacks * MAX_URBS) * 1000*/ UINT_MAX);
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 24f5a26..99295f9 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1,7 +1,7 @@
/*
* usbmidi.c - ALSA USB MIDI driver
*
- * Copyright (c) 2002-2005 Clemens Ladisch
+ * Copyright (c) 2002-2007 Clemens Ladisch
* All rights reserved.
*
* Based on the OSS usb-midi driver by NAGANO Daisuke,
@@ -145,6 +145,7 @@
struct urb* urb;
struct usbmidi_in_port {
struct snd_rawmidi_substream *substream;
+ u8 running_status_length;
} ports[0x10];
u8 seen_f5;
u8 error_resubmit;
@@ -366,6 +367,46 @@
}
/*
+ * Buggy M-Audio device: running status on input results in a packet that has
+ * the data bytes but not the status byte and that is marked with CIN 4.
+ */
+static void snd_usbmidi_maudio_broken_running_status_input(
+ struct snd_usb_midi_in_endpoint* ep,
+ uint8_t* buffer, int buffer_length)
+{
+ int i;
+
+ for (i = 0; i + 3 < buffer_length; i += 4)
+ if (buffer[i] != 0) {
+ int cable = buffer[i] >> 4;
+ u8 cin = buffer[i] & 0x0f;
+ struct usbmidi_in_port *port = &ep->ports[cable];
+ int length;
+
+ length = snd_usbmidi_cin_length[cin];
+ if (cin == 0xf && buffer[i + 1] >= 0xf8)
+ ; /* realtime msg: no running status change */
+ else if (cin >= 0x8 && cin <= 0xe)
+ /* channel msg */
+ port->running_status_length = length - 1;
+ else if (cin == 0x4 &&
+ port->running_status_length != 0 &&
+ buffer[i + 1] < 0x80)
+ /* CIN 4 that is not a SysEx */
+ length = port->running_status_length;
+ else
+ /*
+ * All other msgs cannot begin running status.
+ * (A channel msg sent as two or three CIN 0xF
+ * packets could in theory, but this device
+ * doesn't use this format.)
+ */
+ port->running_status_length = 0;
+ snd_usbmidi_input_data(ep, cable, &buffer[i + 1], length);
+ }
+}
+
+/*
* Adds one USB MIDI packet to the output buffer.
*/
static void snd_usbmidi_output_standard_packet(struct urb* urb, uint8_t p0,
@@ -525,6 +566,12 @@
.output_packet = snd_usbmidi_output_midiman_packet,
};
+static struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops = {
+ .input = snd_usbmidi_maudio_broken_running_status_input,
+ .output = snd_usbmidi_standard_output,
+ .output_packet = snd_usbmidi_output_standard_packet,
+};
+
/*
* Novation USB MIDI protocol: number of data bytes is in the first byte
* (when receiving) (+1!) or in the second byte (when sending); data begins
@@ -918,7 +965,11 @@
}
/* we never use interrupt output pipes */
pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep);
- ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
+ if (umidi->chip->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
+ /* FIXME: we need more URBs to get reasonable bandwidth here: */
+ ep->max_transfer = 4;
+ else
+ ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
buffer = usb_buffer_alloc(umidi->chip->dev, ep->max_transfer,
GFP_KERNEL, &ep->urb->transfer_dma);
if (!buffer) {
@@ -1606,6 +1657,9 @@
switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) {
case QUIRK_MIDI_STANDARD_INTERFACE:
err = snd_usbmidi_get_ms_info(umidi, endpoints);
+ if (chip->usb_id == USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
+ umidi->usb_protocol_ops =
+ &snd_usbmidi_maudio_broken_running_status_ops;
break;
case QUIRK_MIDI_FIXED_ENDPOINT:
memcpy(&endpoints[0], quirk->data,
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 8582620..8fcbe93 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -40,6 +40,29 @@
.bInterfaceClass = USB_CLASS_VENDOR_SPEC
/*
+ * Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface
+ * class matches do not take effect without an explicit ID match.
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x046d,
+ .idProduct = 0x08f0,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+},
+{
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x046d,
+ .idProduct = 0x08f6,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
+},
+
+/*
* Yamaha devices
*/