serial: sh-sci: Generalize overrun handling.

This consolidates all of the broken out overrun handling and ensures that
we have sensible defaults per-port type, in addition to making sure that
overruns are flagged appropriately in the error mask for parts that
haven't explicitly disabled support for it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 280c02a..bb27885 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -563,13 +563,19 @@
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
 	struct tty_struct *tty = port->state->port.tty;
+	struct sci_port *s = to_sci_port(port);
 
-	if (status & SCxSR_ORER(port)) {
-		/* overrun error */
-		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
-			copied++;
+	/*
+	 * Handle overruns, if supported.
+	 */
+	if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
+		if (status & (1 << s->cfg->overrun_bit)) {
+			/* overrun error */
+			if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
+				copied++;
 
-		dev_notice(port->dev, "overrun error");
+			dev_notice(port->dev, "overrun error");
+		}
 	}
 
 	if (status & SCxSR_FER(port)) {
@@ -617,12 +623,19 @@
 static int sci_handle_fifo_overrun(struct uart_port *port)
 {
 	struct tty_struct *tty = port->state->port.tty;
+	struct sci_port *s = to_sci_port(port);
 	int copied = 0;
 
+	/*
+	 * XXX: Technically not limited to non-SCIFs, it's simply the
+	 * SCLSR check that is for the moment SCIF-specific. This
+	 * probably wants to be revisited for SCIFA/B as well as for
+	 * factoring in SCI overrun detection.
+	 */
 	if (port->type != PORT_SCIF)
 		return 0;
 
-	if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+	if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
 		sci_out(port, SCLSR, 0);
 
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -1755,6 +1768,32 @@
 	sci_port->break_timer.function = sci_break_timer;
 	init_timer(&sci_port->break_timer);
 
+	/*
+	 * Establish some sensible defaults for the error detection.
+	 */
+	if (!p->error_mask)
+		p->error_mask = (p->type == PORT_SCI) ?
+			SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
+
+	/*
+	 * Establish sensible defaults for the overrun detection, unless
+	 * the part has explicitly disabled support for it.
+	 */
+	if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
+		if (p->type == PORT_SCI)
+			p->overrun_bit = 5;
+		else if (p->scbrr_algo_id == SCBRR_ALGO_4)
+			p->overrun_bit = 9;
+		else
+			p->overrun_bit = 0;
+
+		/*
+		 * Make the error mask inclusive of overrun detection, if
+		 * supported.
+		 */
+		p->error_mask |= (1 << p->overrun_bit);
+	}
+
 	sci_port->cfg		= p;
 
 	port->mapbase		= p->mapbase;
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index ed1c09c..caab353 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -19,11 +19,9 @@
       defined(CONFIG_ARCH_SH7372)
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
-# define SCIF_ORER	   0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001   /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
@@ -32,15 +30,12 @@
       defined(CONFIG_CPU_SUBTYPE_SH7751R)
 # define SCSPTR1 0xffe0001c /* 8  bit SCI */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001   /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 # define SCSPTR0 0xfe600024 /* 16 bit SCIF */
 # define SCSPTR1 0xfe610024 /* 16 bit SCIF */
 # define SCSPTR2 0xfe620024 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
-# define SCIF_ORER 0x0001   /* overrun error bit */
 # define PACR 0xa4050100
 # define PBCR 0xa4050102
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
@@ -48,35 +43,24 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 # define PWDR			0xA4050166
 # define PSCR			0xA405011E
-# define SCIF_ORER		0x0001	/* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 # define SCPDR0			0xA405013E      /* 16 bit SCIF0 PSDR */
 # define SCSPTR0		SCPDR0
-# define SCIF_ORER		0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723)
 # define SCSPTR0                0xa4050160
-# define SCIF_ORER              0x0001  /* overrun error bit */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
-# define SCIF_ORER              0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001   /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7757)
 # define SCSPTR0 0xfe4b0020
-# define SCIF_ORER 0x0001
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define SCSPTR0	0xffe00024	/* 16 bit SCIF */
-# define SCIF_ORER	0x0001		/* Overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SH7786)
 # define SCSPTR0	0xffea0024	/* 16 bit SCIF */
-# define SCIF_ORER	0x0001		/* Overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
@@ -84,36 +68,12 @@
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
-# define SCIF_ORER 0x0001  /* overrun error bit */
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 # define SCSPTR0 0xffc30020		/* 16 bit SCIF */
-# define SCIF_ORER 0x0001		/* Overrun error bit */
 #else
 # error CPU subtype not defined
 #endif
 
-/* SCxSR SCI */
-#define SCI_TDRE  0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-#define SCI_RDRF  0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-#define SCI_ORER  0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-#define SCI_FER   0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-#define SCI_PER   0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-#define SCI_TEND  0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-/*      SCI_MPB   0x02  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-/*      SCI_MPBT  0x01  * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
-
-#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER)
-
-/* SCxSR SCIF */
-#define SCIF_ER    0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_TEND  0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_TDFE  0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_BRK   0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_FER   0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_PER   0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_RDF   0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#define SCIF_DR    0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
@@ -121,35 +81,27 @@
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
-# define SCIF_ORER    0x0200
-# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 # define SCIF_RFDC_MASK 0x007f
 # define SCIF_TXROOM_MAX 64
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK )
 # define SCIF_RFDC_MASK 0x007f
 # define SCIF_TXROOM_MAX 64
 /* SH7763 SCIF2 support */
 # define SCIF2_RFDC_MASK 0x001f
 # define SCIF2_TXROOM_MAX 16
 #else
-# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
 # define SCIF_RFDC_MASK 0x001f
 # define SCIF_TXROOM_MAX 16
 #endif
 
-#ifndef SCIF_ORER
-#define SCIF_ORER	0x0000
-#endif
-
 #define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
-#define SCxSR_ERRORS(port)	(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
 #define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
 #define SCxSR_TDxE(port)	(((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
 #define SCxSR_FER(port)		(((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
 #define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 #define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
-#define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER	 : SCIF_ORER)
+
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->cfg->error_mask)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \