mmc: add erase, secure erase, trim and secure trim operations
SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4
cards can support secure erase, trim and secure trim operations that are
all variants of the basic erase command.
SD/MMC device attributes "erase_size" and "preferred_erase_size" have been
added.
"erase_size" is the minimum size, in bytes, of an erase operation. For
MMC, "erase_size" is the erase group size reported by the card. Note that
"erase_size" does not apply to trim or secure trim operations where the
minimum size is always one 512 byte sector. For SD, "erase_size" is 512
if the card is block-addressed, 0 otherwise.
SD/MMC cards can erase an arbitrarily large area up to and
including the whole card. When erasing a large area it may
be desirable to do it in smaller chunks for three reasons:
1. A single erase command will make all other I/O on the card
wait. This is not a problem if the whole card is being erased, but
erasing one partition will make I/O for another partition on the
same card wait for the duration of the erase - which could be a
several minutes.
2. To be able to inform the user of erase progress.
3. The erase timeout becomes too large to be very useful.
Because the erase timeout contains a margin which is multiplied by
the size of the erase area, the value can end up being several
minutes for large areas.
"erase_size" is not the most efficient unit to erase (especially for SD
where it is just one sector), hence "preferred_erase_size" provides a good
chunk size for erasing large areas.
For MMC, "preferred_erase_size" is the high-capacity erase size if a card
specifies one, otherwise it is based on the capacity of the card.
For SD, "preferred_erase_size" is the allocation unit size specified by
the card.
"preferred_erase_size" is in bytes.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 4d893ea..6b75250 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -31,6 +31,7 @@
unsigned int tacc_ns;
unsigned int r2w_factor;
unsigned int max_dtr;
+ unsigned int erase_size; /* In sectors */
unsigned int read_blkbits;
unsigned int write_blkbits;
unsigned int capacity;
@@ -42,9 +43,16 @@
struct mmc_ext_csd {
u8 rev;
+ u8 erase_group_def;
+ u8 sec_feature_support;
unsigned int sa_timeout; /* Units: 100ns */
unsigned int hs_max_dtr;
unsigned int sectors;
+ unsigned int hc_erase_size; /* In sectors */
+ unsigned int hc_erase_timeout; /* In milliseconds */
+ unsigned int sec_trim_mult; /* Secure trim multiplier */
+ unsigned int sec_erase_mult; /* Secure erase multiplier */
+ unsigned int trim_timeout; /* In milliseconds */
};
struct sd_scr {
@@ -54,6 +62,12 @@
#define SD_SCR_BUS_WIDTH_4 (1<<2)
};
+struct sd_ssr {
+ unsigned int au; /* In sectors */
+ unsigned int erase_timeout; /* In milliseconds */
+ unsigned int erase_offset; /* In milliseconds */
+};
+
struct sd_switch_caps {
unsigned int hs_max_dtr;
};
@@ -106,6 +120,11 @@
#define MMC_QUIRK_NONSTD_SDIO (1<<2) /* non-standard SDIO card attached */
/* (missing CIA registers) */
+ unsigned int erase_size; /* erase size in sectors */
+ unsigned int erase_shift; /* if erase unit is power 2 */
+ unsigned int pref_erase; /* in sectors */
+ u8 erased_byte; /* value of erased bytes */
+
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
u32 raw_scr[2]; /* raw card SCR */
@@ -113,6 +132,7 @@
struct mmc_csd csd; /* card specific */
struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
struct sd_scr scr; /* extra SD information */
+ struct sd_ssr ssr; /* yet more SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
unsigned int sdio_funcs; /* number of SDIO functions */
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index e4898e9..7429033 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -92,6 +92,8 @@
* actively failing requests
*/
+ unsigned int erase_timeout; /* in milliseconds */
+
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
};
@@ -134,6 +136,23 @@
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
+#define MMC_ERASE_ARG 0x00000000
+#define MMC_SECURE_ERASE_ARG 0x80000000
+#define MMC_TRIM_ARG 0x00000001
+#define MMC_SECURE_TRIM1_ARG 0x80000001
+#define MMC_SECURE_TRIM2_ARG 0x80008000
+
+#define MMC_SECURE_ARGS 0x80000000
+#define MMC_TRIM_ARGS 0x00008001
+
+extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+ unsigned int arg);
+extern int mmc_can_erase(struct mmc_card *card);
+extern int mmc_can_trim(struct mmc_card *card);
+extern int mmc_can_secure_erase_trim(struct mmc_card *card);
+extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+ unsigned int nr);
+
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 513ff03..1575b52 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -156,6 +156,7 @@
#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */
#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
+#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */
mmc_pm_flag_t pm_caps; /* supported pm features */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 52ce988..dd11ae5 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -251,13 +251,21 @@
* EXT_CSD fields
*/
-#define EXT_CSD_BUS_WIDTH 183 /* R/W */
-#define EXT_CSD_HS_TIMING 185 /* R/W */
-#define EXT_CSD_CARD_TYPE 196 /* RO */
-#define EXT_CSD_STRUCTURE 194 /* RO */
-#define EXT_CSD_REV 192 /* RO */
-#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
-#define EXT_CSD_S_A_TIMEOUT 217
+#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
+#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
+#define EXT_CSD_BUS_WIDTH 183 /* R/W */
+#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_REV 192 /* RO */
+#define EXT_CSD_STRUCTURE 194 /* RO */
+#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
+#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
+#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
+#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
+#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
+#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
+#define EXT_CSD_TRIM_MULT 232 /* RO */
/*
* EXT_CSD field definitions
@@ -275,6 +283,10 @@
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_SEC_ER_EN BIT(0)
+#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
+#define EXT_CSD_SEC_GB_CL_EN BIT(4)
+
/*
* MMC_SWITCH access modes
*/
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index f310062..3fd85e0 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -21,8 +21,13 @@
/* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
+ /* class 5 */
+#define SD_ERASE_WR_BLK_START 32 /* ac [31:0] data addr R1 */
+#define SD_ERASE_WR_BLK_END 33 /* ac [31:0] data addr R1 */
+
/* Application commands */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
+#define SD_APP_SD_STATUS 13 /* adtc R1 */
#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */