iwlegacy: rename iwl to il
iwl_legacy prefix result in long function names, what cause that we
have frequent line split and not readable code. Also iwl_foo symbols
are duplicated in iwlwifi driver, what is annoying when editing
kernel tree with cscope.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-commands.h b/drivers/net/wireless/iwlegacy/iwl-commands.h
index 8990405..347d402 100644
--- a/drivers/net/wireless/iwlegacy/iwl-commands.h
+++ b/drivers/net/wireless/iwlegacy/iwl-commands.h
@@ -66,22 +66,22 @@
* Please use iwl-dev.h for driver implementation definitions.
*/
-#ifndef __iwl_legacy_commands_h__
-#define __iwl_legacy_commands_h__
+#ifndef __il_commands_h__
+#define __il_commands_h__
-struct iwl_priv;
+struct il_priv;
/* uCode version contains 4 values: Major/Minor/API/Serial */
-#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
-#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
-#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
-#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
+#define IL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
+#define IL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
+#define IL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
+#define IL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
/* Tx rates */
-#define IWL_CCK_RATES 4
-#define IWL_OFDM_RATES 8
-#define IWL_MAX_RATES (IWL_CCK_RATES + IWL_OFDM_RATES)
+#define IL_CCK_RATES 4
+#define IL_OFDM_RATES 8
+#define IL_MAX_RATES (IL_CCK_RATES + IL_OFDM_RATES)
enum {
REPLY_ALIVE = 0x1,
@@ -163,8 +163,8 @@
*
*****************************************************************************/
-/* iwl_cmd_header flags value */
-#define IWL_CMD_FAILED_MSK 0x40
+/* il_cmd_header flags value */
+#define IL_CMD_FAILED_MSK 0x40
#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
@@ -174,12 +174,12 @@
#define SEQ_RX_FRAME cpu_to_le16(0x8000)
/**
- * struct iwl_cmd_header
+ * struct il_cmd_header
*
* This header format appears in the beginning of each command sent from the
* driver, and each response/notification received from uCode.
*/
-struct iwl_cmd_header {
+struct il_cmd_header {
u8 cmd; /* Command ID: REPLY_RXON, etc. */
u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
/*
@@ -212,7 +212,7 @@
/**
- * struct iwl3945_tx_power
+ * struct il3945_tx_power
*
* Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH
*
@@ -223,21 +223,21 @@
* 2) Radio gain. This sets the analog gain of the radio Tx path.
* It is a coarser setting, and behaves in a logarithmic (dB) fashion.
*
- * Driver obtains values from struct iwl3945_tx_power power_gain_table[][].
+ * Driver obtains values from struct il3945_tx_power power_gain_table[][].
*/
-struct iwl3945_tx_power {
+struct il3945_tx_power {
u8 tx_gain; /* gain for analog radio */
u8 dsp_atten; /* gain for DSP */
} __packed;
/**
- * struct iwl3945_power_per_rate
+ * struct il3945_power_per_rate
*
* Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
*/
-struct iwl3945_power_per_rate {
+struct il3945_power_per_rate {
u8 rate; /* plcp */
- struct iwl3945_tx_power tpc;
+ struct il3945_tx_power tpc;
u8 reserved;
} __packed;
@@ -330,11 +330,11 @@
#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
#define POWER_TABLE_CCK_ENTRY 32
-#define IWL_PWR_NUM_HT_OFDM_ENTRIES 24
-#define IWL_PWR_CCK_ENTRIES 2
+#define IL_PWR_NUM_HT_OFDM_ENTRIES 24
+#define IL_PWR_CCK_ENTRIES 2
/**
- * union iwl4965_tx_power_dual_stream
+ * union il4965_tx_power_dual_stream
*
* Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
* Use __le32 version (struct tx_power_dual_stream) when building command.
@@ -349,7 +349,7 @@
*
* See more details in doc for TXPOWER in iwl-4965-hw.h.
*/
-union iwl4965_tx_power_dual_stream {
+union il4965_tx_power_dual_stream {
struct {
u8 radio_tx_gain[2];
u8 dsp_predis_atten[2];
@@ -362,18 +362,18 @@
*
* Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
*
- * Same format as iwl_tx_power_dual_stream, but __le32
+ * Same format as il_tx_power_dual_stream, but __le32
*/
struct tx_power_dual_stream {
__le32 dw;
} __packed;
/**
- * struct iwl4965_tx_power_db
+ * struct il4965_tx_power_db
*
* Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
*/
-struct iwl4965_tx_power_db {
+struct il4965_tx_power_db {
struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES];
} __packed;
@@ -410,7 +410,7 @@
* 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation,
* for each of 5 frequency ranges.
*/
-struct iwl_init_alive_resp {
+struct il_init_alive_resp {
u8 ucode_minor;
u8 ucode_major;
__le16 reserved1;
@@ -511,7 +511,7 @@
* The Linux driver can print both logs to the system log when a uCode error
* occurs.
*/
-struct iwl_alive_resp {
+struct il_alive_resp {
u8 ucode_minor;
u8 ucode_major;
__le16 reserved1;
@@ -528,7 +528,7 @@
/*
* REPLY_ERROR = 0x2 (response only, not a command)
*/
-struct iwl_error_resp {
+struct il_error_resp {
__le32 error_type;
u8 cmd_id;
u8 reserved1;
@@ -657,7 +657,7 @@
* regardless of whether RXON_FILTER_ASSOC_MSK is set.
*/
-struct iwl3945_rxon_cmd {
+struct il3945_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
u8 bssid_addr[6];
@@ -676,7 +676,7 @@
__le16 reserved5;
} __packed;
-struct iwl4965_rxon_cmd {
+struct il4965_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
u8 bssid_addr[6];
@@ -699,7 +699,7 @@
/* Create a common rxon cmd which will be typecast into the 3945 or 4965
* specific rxon cmd, depending on where it is called from.
*/
-struct iwl_legacy_rxon_cmd {
+struct il_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
u8 bssid_addr[6];
@@ -725,7 +725,7 @@
/*
* REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
*/
-struct iwl3945_rxon_assoc_cmd {
+struct il3945_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
@@ -733,7 +733,7 @@
__le16 reserved;
} __packed;
-struct iwl4965_rxon_assoc_cmd {
+struct il4965_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
@@ -744,14 +744,14 @@
__le16 reserved;
} __packed;
-#define IWL_CONN_MAX_LISTEN_INTERVAL 10
-#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
+#define IL_CONN_MAX_LISTEN_INTERVAL 10
+#define IL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
#define IWL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */
/*
* REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
*/
-struct iwl_rxon_time_cmd {
+struct il_rxon_time_cmd {
__le64 timestamp;
__le16 beacon_interval;
__le16 atim_window;
@@ -764,30 +764,30 @@
/*
* REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
*/
-struct iwl3945_channel_switch_cmd {
+struct il3945_channel_switch_cmd {
u8 band;
u8 expect_beacon;
__le16 channel;
__le32 rxon_flags;
__le32 rxon_filter_flags;
__le32 switch_time;
- struct iwl3945_power_per_rate power[IWL_MAX_RATES];
+ struct il3945_power_per_rate power[IL_MAX_RATES];
} __packed;
-struct iwl4965_channel_switch_cmd {
+struct il4965_channel_switch_cmd {
u8 band;
u8 expect_beacon;
__le16 channel;
__le32 rxon_flags;
__le32 rxon_filter_flags;
__le32 switch_time;
- struct iwl4965_tx_power_db tx_power;
+ struct il4965_tx_power_db tx_power;
} __packed;
/*
* CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
*/
-struct iwl_csa_notification {
+struct il_csa_notification {
__le16 band;
__le16 channel;
__le32 status; /* 0 - OK, 1 - fail */
@@ -800,8 +800,8 @@
*****************************************************************************/
/**
- * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM
- * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd
+ * struct il_ac_qos -- QOS timing params for REPLY_QOS_PARAM
+ * One for each of 4 EDCA access categories in struct il_qosparam_cmd
*
* @cw_min: Contention window, start value in numbers of slots.
* Should be a power-of-2, minus 1. Device's default is 0x0f.
@@ -815,7 +815,7 @@
* transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
* value, to cap the CW value.
*/
-struct iwl_ac_qos {
+struct il_ac_qos {
__le16 cw_min;
__le16 cw_max;
u8 aifsn;
@@ -837,9 +837,9 @@
* This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs
* 0: Background, 1: Best Effort, 2: Video, 3: Voice.
*/
-struct iwl_qosparam_cmd {
+struct il_qosparam_cmd {
__le32 qos_flags;
- struct iwl_ac_qos ac[AC_NUM];
+ struct il_ac_qos ac[AC_NUM];
} __packed;
/******************************************************************************
@@ -852,15 +852,15 @@
*/
/* Special, dedicated locations within device's station table */
-#define IWL_AP_ID 0
-#define IWL_STA_ID 2
+#define IL_AP_ID 0
+#define IL_STA_ID 2
#define IWL3945_BROADCAST_ID 24
#define IWL3945_STATION_COUNT 25
#define IWL4965_BROADCAST_ID 31
#define IWL4965_STATION_COUNT 32
-#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/
-#define IWL_INVALID_STATION 255
+#define IL_STATION_COUNT 32 /* MAX(3945,4965)*/
+#define IL_INVALID_STATION 255
#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
@@ -905,7 +905,7 @@
* combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid))
-struct iwl4965_keyinfo {
+struct il4965_keyinfo {
__le16 key_flags;
u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
u8 reserved1;
@@ -923,7 +923,7 @@
*
* Driver selects unused table index when adding new station,
* or the index to a pre-existing station entry when modifying that station.
- * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP).
+ * Some indexes have special purposes (IL_AP_ID, index 0, is for AP).
*
* modify_mask flags select which parameters to modify vs. leave alone.
*/
@@ -954,19 +954,19 @@
* their own txpower/rate setup data).
*
* When getting started on a new channel, driver must set up the
- * IWL_BROADCAST_ID entry (last entry in the table). For a client
+ * IL_BROADCAST_ID entry (last entry in the table). For a client
* station in a BSS, once an AP is selected, driver sets up the AP STA
- * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP
+ * in the IL_AP_ID entry (1st entry in the table). BROADCAST and AP
* are all that are needed for a BSS client station. If the device is
* used as AP, or in an IBSS network, driver must set up station table
- * entries for all STAs in network, starting with index IWL_STA_ID.
+ * entries for all STAs in network, starting with index IL_STA_ID.
*/
-struct iwl3945_addsta_cmd {
+struct il3945_addsta_cmd {
u8 mode; /* 1: modify existing, 0: add new station */
u8 reserved[3];
struct sta_id_modify sta;
- struct iwl4965_keyinfo key;
+ struct il4965_keyinfo key;
__le32 station_flags; /* STA_FLG_* */
__le32 station_flags_msk; /* STA_FLG_* */
@@ -990,11 +990,11 @@
__le16 add_immediate_ba_ssn;
} __packed;
-struct iwl4965_addsta_cmd {
+struct il4965_addsta_cmd {
u8 mode; /* 1: modify existing, 0: add new station */
u8 reserved[3];
struct sta_id_modify sta;
- struct iwl4965_keyinfo key;
+ struct il4965_keyinfo key;
__le32 station_flags; /* STA_FLG_* */
__le32 station_flags_msk; /* STA_FLG_* */
@@ -1028,11 +1028,11 @@
} __packed;
/* Wrapper struct for 3945 and 4965 addsta_cmd structures */
-struct iwl_legacy_addsta_cmd {
+struct il_addsta_cmd {
u8 mode; /* 1: modify existing, 0: add new station */
u8 reserved[3];
struct sta_id_modify sta;
- struct iwl4965_keyinfo key;
+ struct il4965_keyinfo key;
__le32 station_flags; /* STA_FLG_* */
__le32 station_flags_msk; /* STA_FLG_* */
@@ -1073,7 +1073,7 @@
/*
* REPLY_ADD_STA = 0x18 (response)
*/
-struct iwl_add_sta_resp {
+struct il_add_sta_resp {
u8 status; /* ADD_STA_* */
} __packed;
@@ -1081,34 +1081,34 @@
/*
* REPLY_REM_STA = 0x19 (response)
*/
-struct iwl_rem_sta_resp {
+struct il_rem_sta_resp {
u8 status;
} __packed;
/*
* REPLY_REM_STA = 0x19 (command)
*/
-struct iwl_rem_sta_cmd {
+struct il_rem_sta_cmd {
u8 num_sta; /* number of removed stations */
u8 reserved[3];
u8 addr[ETH_ALEN]; /* MAC addr of the first station */
u8 reserved2[2];
} __packed;
-#define IWL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0))
-#define IWL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1))
-#define IWL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2))
-#define IWL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3))
-#define IWL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00)
+#define IL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0))
+#define IL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1))
+#define IL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2))
+#define IL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3))
+#define IL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00)
-#define IWL_DROP_SINGLE 0
-#define IWL_DROP_SELECTED 1
-#define IWL_DROP_ALL 2
+#define IL_DROP_SINGLE 0
+#define IL_DROP_SELECTED 1
+#define IL_DROP_ALL 2
/*
* REPLY_WEP_KEY = 0x20
*/
-struct iwl_wep_key {
+struct il_wep_key {
u8 key_index;
u8 key_offset;
u8 reserved1[2];
@@ -1117,12 +1117,12 @@
u8 key[16];
} __packed;
-struct iwl_wep_cmd {
+struct il_wep_cmd {
u8 num_keys;
u8 global_key_type;
u8 flags;
u8 reserved;
- struct iwl_wep_key key[0];
+ struct il_wep_key key[0];
} __packed;
#define WEP_KEY_WEP_TYPE 1
@@ -1169,7 +1169,7 @@
#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
-struct iwl3945_rx_frame_stats {
+struct il3945_rx_frame_stats {
u8 phy_count;
u8 id;
u8 rssi;
@@ -1179,7 +1179,7 @@
u8 payload[0];
} __packed;
-struct iwl3945_rx_frame_hdr {
+struct il3945_rx_frame_hdr {
__le16 channel;
__le16 phy_flags;
u8 reserved1;
@@ -1188,7 +1188,7 @@
u8 payload[0];
} __packed;
-struct iwl3945_rx_frame_end {
+struct il3945_rx_frame_end {
__le32 status;
__le64 timestamp;
__le32 beacon_timestamp;
@@ -1202,13 +1202,13 @@
* The actual offsets of the hdr and end are dynamic based on
* stats.phy_count
*/
-struct iwl3945_rx_frame {
- struct iwl3945_rx_frame_stats stats;
- struct iwl3945_rx_frame_hdr hdr;
- struct iwl3945_rx_frame_end end;
+struct il3945_rx_frame {
+ struct il3945_rx_frame_stats stats;
+ struct il3945_rx_frame_hdr hdr;
+ struct il3945_rx_frame_end end;
} __packed;
-#define IWL39_RX_FRAME_SIZE (4 + sizeof(struct iwl3945_rx_frame))
+#define IWL39_RX_FRAME_SIZE (4 + sizeof(struct il3945_rx_frame))
/* Fixed (non-configurable) rx data from phy */
@@ -1217,7 +1217,7 @@
#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
#define IWL49_AGC_DB_POS (7)
-struct iwl4965_rx_non_cfg_phy {
+struct il4965_rx_non_cfg_phy {
__le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */
__le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */
u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */
@@ -1229,7 +1229,7 @@
* REPLY_RX = 0xc3 (response only, not a command)
* Used only for legacy (non 11n) frames.
*/
-struct iwl_rx_phy_res {
+struct il_rx_phy_res {
u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */
u8 cfg_phy_cnt; /* configurable DSP phy data byte count */
u8 stat_id; /* configurable DSP phy data set ID */
@@ -1244,7 +1244,7 @@
__le16 frame_time; /* frame's time on the air */
} __packed;
-struct iwl_rx_mpdu_res_start {
+struct il_rx_mpdu_res_start {
__le16 byte_count;
__le16 reserved;
} __packed;
@@ -1372,7 +1372,7 @@
* REPLY_TX = 0x1c (command)
*/
-struct iwl3945_tx_cmd {
+struct il3945_tx_cmd {
/*
* MPDU byte count:
* MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
@@ -1436,7 +1436,7 @@
/*
* REPLY_TX = 0x1c (response)
*/
-struct iwl3945_tx_resp {
+struct il3945_tx_resp {
u8 failure_rts;
u8 failure_frame;
u8 bt_kill_count;
@@ -1451,13 +1451,13 @@
* Used for managing Tx retries when expecting block-acks.
* Driver should set these fields to 0.
*/
-struct iwl_dram_scratch {
+struct il_dram_scratch {
u8 try_cnt; /* Tx attempts */
u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
__le16 reserved;
} __packed;
-struct iwl_tx_cmd {
+struct il_tx_cmd {
/*
* MPDU byte count:
* MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
@@ -1481,7 +1481,7 @@
/* uCode may modify this field of the Tx command (in host DRAM!).
* Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
- struct iwl_dram_scratch scratch;
+ struct il_dram_scratch scratch;
/* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
__le32 rate_n_flags; /* RATE_MCS_* */
@@ -1697,7 +1697,7 @@
__le16 sequence;
} __packed;
-struct iwl4965_tx_resp {
+struct il4965_tx_resp {
u8 frame_count; /* 1 no aggregation, >1 aggregation */
u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
u8 failure_rts; /* # failures due to unsuccessful RTS */
@@ -1739,7 +1739,7 @@
*
* Reports Block-Acknowledge from recipient station
*/
-struct iwl_compressed_ba_resp {
+struct il_compressed_ba_resp {
__le32 sta_addr_lo32;
__le16 sta_addr_hi16;
__le16 reserved;
@@ -1759,23 +1759,23 @@
* See details under "TXPOWER" in iwl-4965-hw.h.
*/
-struct iwl3945_txpowertable_cmd {
+struct il3945_txpowertable_cmd {
u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
u8 reserved;
__le16 channel;
- struct iwl3945_power_per_rate power[IWL_MAX_RATES];
+ struct il3945_power_per_rate power[IL_MAX_RATES];
} __packed;
-struct iwl4965_txpowertable_cmd {
+struct il4965_txpowertable_cmd {
u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
u8 reserved;
__le16 channel;
- struct iwl4965_tx_power_db tx_power;
+ struct il4965_tx_power_db tx_power;
} __packed;
/**
- * struct iwl3945_rate_scaling_cmd - Rate Scaling Command & Response
+ * struct il3945_rate_scaling_cmd - Rate Scaling Command & Response
*
* REPLY_RATE_SCALE = 0x47 (command, has simple generic response)
*
@@ -1789,16 +1789,16 @@
* when passed through ofdm_basic_rates on the REPLY_RXON
* command would be bit 0 (1 << 0)
*/
-struct iwl3945_rate_scaling_info {
+struct il3945_rate_scaling_info {
__le16 rate_n_flags;
u8 try_cnt;
u8 next_rate_index;
} __packed;
-struct iwl3945_rate_scaling_cmd {
+struct il3945_rate_scaling_cmd {
u8 table_id;
u8 reserved[3];
- struct iwl3945_rate_scaling_info table[IWL_MAX_RATES];
+ struct il3945_rate_scaling_info table[IL_MAX_RATES];
} __packed;
@@ -1818,11 +1818,11 @@
/**
- * struct iwl_link_qual_general_params
+ * struct il_link_qual_general_params
*
* Used in REPLY_TX_LINK_QUALITY_CMD
*/
-struct iwl_link_qual_general_params {
+struct il_link_qual_general_params {
u8 flags;
/* No entries at or above this (driver chosen) index contain MIMO */
@@ -1861,11 +1861,11 @@
#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
/**
- * struct iwl_link_qual_agg_params
+ * struct il_link_qual_agg_params
*
* Used in REPLY_TX_LINK_QUALITY_CMD
*/
-struct iwl_link_qual_agg_params {
+struct il_link_qual_agg_params {
/*
*Maximum number of uSec in aggregation.
@@ -1966,7 +1966,7 @@
*
* When using block-ack (aggregation), all frames are transmitted at the same
* rate, since there is no per-attempt acknowledgment from the destination
- * station. The Tx response struct iwl_tx_resp indicates the Tx rate in
+ * station. The Tx response struct il_tx_resp indicates the Tx rate in
* rate_n_flags field. After receiving a block-ack, the driver can update
* history for the entire block all at once.
*
@@ -2079,14 +2079,14 @@
* legacy), and then repeat the search process.
*
*/
-struct iwl_link_quality_cmd {
+struct il_link_quality_cmd {
/* Index of destination/recipient station in uCode's station table */
u8 sta_id;
u8 reserved1;
__le16 control; /* not used */
- struct iwl_link_qual_general_params general_params;
- struct iwl_link_qual_agg_params agg_params;
+ struct il_link_qual_general_params general_params;
+ struct il_link_qual_agg_params agg_params;
/*
* Rate info; when using rate-scaling, Tx command's initial_rate_index
@@ -2094,7 +2094,7 @@
* 4965 devices works its way through table when retrying Tx.
*/
struct {
- __le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */
+ __le32 rate_n_flags; /* RATE_MCS_*, IL_RATE_* */
} rs_table[LINK_QUAL_MAX_RETRY_NUM];
__le32 reserved2;
} __packed;
@@ -2123,7 +2123,7 @@
* same platform. Bluetooth device alerts wireless device when it will Tx;
* wireless device can delay or kill its own Tx to accommodate.
*/
-struct iwl_bt_cmd {
+struct il_bt_cmd {
u8 flags;
u8 lead_time;
u8 max_kill;
@@ -2150,18 +2150,18 @@
RXON_FILTER_ASSOC_MSK | \
RXON_FILTER_BCON_AWARE_MSK)
-struct iwl_measure_channel {
+struct il_measure_channel {
__le32 duration; /* measurement duration in extended beacon
* format */
u8 channel; /* channel to measure */
- u8 type; /* see enum iwl_measure_type */
+ u8 type; /* see enum il_measure_type */
__le16 reserved;
} __packed;
/*
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command)
*/
-struct iwl_spectrum_cmd {
+struct il_spectrum_cmd {
__le16 len; /* number of bytes starting from token */
u8 token; /* token id */
u8 id; /* measurement id -- 0 or 1 */
@@ -2174,13 +2174,13 @@
__le32 filter_flags; /* rxon filter flags */
__le16 channel_count; /* minimum 1, maximum 10 */
__le16 reserved3;
- struct iwl_measure_channel channels[10];
+ struct il_measure_channel channels[10];
} __packed;
/*
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response)
*/
-struct iwl_spectrum_resp {
+struct il_spectrum_resp {
u8 token;
u8 id; /* id of the prior command replaced, or 0xff */
__le16 status; /* 0 - command will be handled
@@ -2188,49 +2188,49 @@
* measurement) */
} __packed;
-enum iwl_measurement_state {
- IWL_MEASUREMENT_START = 0,
- IWL_MEASUREMENT_STOP = 1,
+enum il_measurement_state {
+ IL_MEASUREMENT_START = 0,
+ IL_MEASUREMENT_STOP = 1,
};
-enum iwl_measurement_status {
- IWL_MEASUREMENT_OK = 0,
- IWL_MEASUREMENT_CONCURRENT = 1,
- IWL_MEASUREMENT_CSA_CONFLICT = 2,
- IWL_MEASUREMENT_TGH_CONFLICT = 3,
+enum il_measurement_status {
+ IL_MEASUREMENT_OK = 0,
+ IL_MEASUREMENT_CONCURRENT = 1,
+ IL_MEASUREMENT_CSA_CONFLICT = 2,
+ IL_MEASUREMENT_TGH_CONFLICT = 3,
/* 4-5 reserved */
- IWL_MEASUREMENT_STOPPED = 6,
- IWL_MEASUREMENT_TIMEOUT = 7,
- IWL_MEASUREMENT_PERIODIC_FAILED = 8,
+ IL_MEASUREMENT_STOPPED = 6,
+ IL_MEASUREMENT_TIMEOUT = 7,
+ IL_MEASUREMENT_PERIODIC_FAILED = 8,
};
#define NUM_ELEMENTS_IN_HISTOGRAM 8
-struct iwl_measurement_histogram {
+struct il_measurement_histogram {
__le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
__le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
} __packed;
/* clear channel availability counters */
-struct iwl_measurement_cca_counters {
+struct il_measurement_cca_counters {
__le32 ofdm;
__le32 cck;
} __packed;
-enum iwl_measure_type {
- IWL_MEASURE_BASIC = (1 << 0),
- IWL_MEASURE_CHANNEL_LOAD = (1 << 1),
- IWL_MEASURE_HISTOGRAM_RPI = (1 << 2),
- IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
- IWL_MEASURE_FRAME = (1 << 4),
+enum il_measure_type {
+ IL_MEASURE_BASIC = (1 << 0),
+ IL_MEASURE_CHANNEL_LOAD = (1 << 1),
+ IL_MEASURE_HISTOGRAM_RPI = (1 << 2),
+ IL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
+ IL_MEASURE_FRAME = (1 << 4),
/* bits 5:6 are reserved */
- IWL_MEASURE_IDLE = (1 << 7),
+ IL_MEASURE_IDLE = (1 << 7),
};
/*
* SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command)
*/
-struct iwl_spectrum_notification {
+struct il_spectrum_notification {
u8 id; /* measurement id -- 0 or 1 */
u8 token;
u8 channel_index; /* index in measurement channel list */
@@ -2238,7 +2238,7 @@
__le32 start_time; /* lower 32-bits of TSF */
u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
u8 channel;
- u8 type; /* see enum iwl_measurement_type */
+ u8 type; /* see enum il_measurement_type */
u8 reserved1;
/* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
* valid if applicable for measurement type requested. */
@@ -2248,9 +2248,9 @@
u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
* unidentified */
u8 reserved2[3];
- struct iwl_measurement_histogram histogram;
+ struct il_measurement_histogram histogram;
__le32 stop_time; /* lower 32-bits of TSF */
- __le32 status; /* see iwl_measurement_status */
+ __le32 status; /* see il_measurement_status */
} __packed;
/******************************************************************************
@@ -2260,7 +2260,7 @@
*****************************************************************************/
/**
- * struct iwl_powertable_cmd - Power Table Command
+ * struct il_powertable_cmd - Power Table Command
* @flags: See below:
*
* POWER_TABLE_CMD = 0x77 (command, has simple generic response)
@@ -2294,26 +2294,26 @@
* ucode assume sleep over DTIM is allowed and we don't need to wake up
* for every DTIM.
*/
-#define IWL_POWER_VEC_SIZE 5
+#define IL_POWER_VEC_SIZE 5
-#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0))
-#define IWL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3))
+#define IL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0))
+#define IL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3))
-struct iwl3945_powertable_cmd {
+struct il3945_powertable_cmd {
__le16 flags;
u8 reserved[2];
__le32 rx_data_timeout;
__le32 tx_data_timeout;
- __le32 sleep_interval[IWL_POWER_VEC_SIZE];
+ __le32 sleep_interval[IL_POWER_VEC_SIZE];
} __packed;
-struct iwl_powertable_cmd {
+struct il_powertable_cmd {
__le16 flags;
u8 keep_alive_seconds; /* 3945 reserved */
u8 debug_flags; /* 3945 reserved */
__le32 rx_data_timeout;
__le32 tx_data_timeout;
- __le32 sleep_interval[IWL_POWER_VEC_SIZE];
+ __le32 sleep_interval[IL_POWER_VEC_SIZE];
__le32 keep_alive_beacons;
} __packed;
@@ -2321,7 +2321,7 @@
* PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command)
* all devices identical.
*/
-struct iwl_sleep_notification {
+struct il_sleep_notification {
u8 pm_sleep_mode;
u8 pm_wakeup_src;
__le16 reserved;
@@ -2332,23 +2332,23 @@
/* Sleep states. all devices identical. */
enum {
- IWL_PM_NO_SLEEP = 0,
- IWL_PM_SLP_MAC = 1,
- IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
- IWL_PM_SLP_FULL_MAC_CARD_STATE = 3,
- IWL_PM_SLP_PHY = 4,
- IWL_PM_SLP_REPENT = 5,
- IWL_PM_WAKEUP_BY_TIMER = 6,
- IWL_PM_WAKEUP_BY_DRIVER = 7,
- IWL_PM_WAKEUP_BY_RFKILL = 8,
+ IL_PM_NO_SLEEP = 0,
+ IL_PM_SLP_MAC = 1,
+ IL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
+ IL_PM_SLP_FULL_MAC_CARD_STATE = 3,
+ IL_PM_SLP_PHY = 4,
+ IL_PM_SLP_REPENT = 5,
+ IL_PM_WAKEUP_BY_TIMER = 6,
+ IL_PM_WAKEUP_BY_DRIVER = 7,
+ IL_PM_WAKEUP_BY_RFKILL = 8,
/* 3 reserved */
- IWL_PM_NUM_OF_MODES = 12,
+ IL_PM_NUM_OF_MODES = 12,
};
/*
* CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command)
*/
-struct iwl_card_state_notif {
+struct il_card_state_notif {
__le32 flags;
} __packed;
@@ -2357,7 +2357,7 @@
#define CT_CARD_DISABLED 0x04
#define RXON_CARD_DISABLED 0x10
-struct iwl_ct_kill_config {
+struct il_ct_kill_config {
__le32 reserved;
__le32 critical_temperature_M;
__le32 critical_temperature_R;
@@ -2373,7 +2373,7 @@
#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1)
/**
- * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
+ * struct il_scan_channel - entry in REPLY_SCAN_CMD channel table
*
* One for each channel in the scan list.
* Each channel can independently select:
@@ -2383,7 +2383,7 @@
* quiet_plcp_th, good_CRC_th)
*
* To avoid uCode errors, make sure the following are true (see comments
- * under struct iwl_scan_cmd about max_out_time and quiet_time):
+ * under struct il_scan_cmd about max_out_time and quiet_time):
* 1) If using passive_dwell (i.e. passive_dwell != 0):
* active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
* 2) quiet_time <= active_dwell
@@ -2391,7 +2391,7 @@
* passive_dwell < max_out_time
* active_dwell < max_out_time
*/
-struct iwl3945_scan_channel {
+struct il3945_scan_channel {
/*
* type is defined as:
* 0:0 1 = active, 0 = passive
@@ -2400,8 +2400,8 @@
* 5:7 reserved
*/
u8 type;
- u8 channel; /* band is selected by iwl3945_scan_cmd "flags" field */
- struct iwl3945_tx_power tpc;
+ u8 channel; /* band is selected by il3945_scan_cmd "flags" field */
+ struct il3945_tx_power tpc;
__le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
__le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
} __packed;
@@ -2409,7 +2409,7 @@
/* set number of direct probes u8 type */
#define IWL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1))))
-struct iwl_scan_channel {
+struct il_scan_channel {
/*
* type is defined as:
* 0:0 1 = active, 0 = passive
@@ -2418,7 +2418,7 @@
* 21:31 reserved
*/
__le32 type;
- __le16 channel; /* band is selected by iwl_scan_cmd "flags" field */
+ __le16 channel; /* band is selected by il_scan_cmd "flags" field */
u8 tx_gain; /* gain for analog radio */
u8 dsp_atten; /* gain for DSP */
__le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
@@ -2426,17 +2426,17 @@
} __packed;
/* set number of direct probes __le32 type */
-#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+#define IL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
/**
- * struct iwl_ssid_ie - directed scan network information element
+ * struct il_ssid_ie - directed scan network information element
*
* Up to 20 of these may appear in REPLY_SCAN_CMD (Note: Only 4 are in
- * 3945 SCAN api), selected by "type" bit field in struct iwl_scan_channel;
+ * 3945 SCAN api), selected by "type" bit field in struct il_scan_channel;
* each channel may select different ssids from among the 20 (4) entries.
* SSID IEs get transmitted in reverse order of entry.
*/
-struct iwl_ssid_ie {
+struct il_ssid_ie {
u8 id;
u8 len;
u8 ssid[32];
@@ -2445,11 +2445,11 @@
#define PROBE_OPTION_MAX_3945 4
#define PROBE_OPTION_MAX 20
#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
-#define IWL_GOOD_CRC_TH_DISABLED 0
-#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
-#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
-#define IWL_MAX_SCAN_SIZE 1024
-#define IWL_MAX_CMD_SIZE 4096
+#define IL_GOOD_CRC_TH_DISABLED 0
+#define IL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
+#define IL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
+#define IL_MAX_SCAN_SIZE 1024
+#define IL_MAX_CMD_SIZE 4096
/*
* REPLY_SCAN_CMD = 0x80 (command)
@@ -2501,10 +2501,10 @@
* Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
*
* To avoid uCode errors, see timing restrictions described under
- * struct iwl_scan_channel.
+ * struct il_scan_channel.
*/
-struct iwl3945_scan_cmd {
+struct il3945_scan_cmd {
__le16 len;
u8 reserved0;
u8 channel_count; /* # channels in channel list */
@@ -2525,10 +2525,10 @@
/* For active scans (set to all-0s for passive scans).
* Does not include payload. Must specify Tx rate; no rate scaling. */
- struct iwl3945_tx_cmd tx_cmd;
+ struct il3945_tx_cmd tx_cmd;
/* For directed active scans (set to all-0s otherwise) */
- struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
+ struct il_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
/*
* Probe request frame, followed by channel list.
@@ -2538,7 +2538,7 @@
* Number of channels in list is specified by channel_count.
* Each channel in list is of type:
*
- * struct iwl3945_scan_channel channels[0];
+ * struct il3945_scan_channel channels[0];
*
* NOTE: Only one band of channels can be scanned per pass. You
* must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
@@ -2548,7 +2548,7 @@
u8 data[0];
} __packed;
-struct iwl_scan_cmd {
+struct il_scan_cmd {
__le16 len;
u8 reserved0;
u8 channel_count; /* # channels in channel list */
@@ -2569,10 +2569,10 @@
/* For active scans (set to all-0s for passive scans).
* Does not include payload. Must specify Tx rate; no rate scaling. */
- struct iwl_tx_cmd tx_cmd;
+ struct il_tx_cmd tx_cmd;
/* For directed active scans (set to all-0s otherwise) */
- struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+ struct il_ssid_ie direct_scan[PROBE_OPTION_MAX];
/*
* Probe request frame, followed by channel list.
@@ -2582,7 +2582,7 @@
* Number of channels in list is specified by channel_count.
* Each channel in list is of type:
*
- * struct iwl_scan_channel channels[0];
+ * struct il_scan_channel channels[0];
*
* NOTE: Only one band of channels can be scanned per pass. You
* must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
@@ -2600,14 +2600,14 @@
/*
* REPLY_SCAN_CMD = 0x80 (response)
*/
-struct iwl_scanreq_notification {
+struct il_scanreq_notification {
__le32 status; /* 1: okay, 2: cannot fulfill request */
} __packed;
/*
* SCAN_START_NOTIFICATION = 0x82 (notification only, not a command)
*/
-struct iwl_scanstart_notification {
+struct il_scanstart_notification {
__le32 tsf_low;
__le32 tsf_high;
__le32 beacon_timer;
@@ -2620,17 +2620,17 @@
#define SCAN_OWNER_STATUS 0x1
#define MEASURE_OWNER_STATUS 0x2
-#define IWL_PROBE_STATUS_OK 0
-#define IWL_PROBE_STATUS_TX_FAILED BIT(0)
+#define IL_PROBE_STATUS_OK 0
+#define IL_PROBE_STATUS_TX_FAILED BIT(0)
/* error statuses combined with TX_FAILED */
-#define IWL_PROBE_STATUS_FAIL_TTL BIT(1)
-#define IWL_PROBE_STATUS_FAIL_BT BIT(2)
+#define IL_PROBE_STATUS_FAIL_TTL BIT(1)
+#define IL_PROBE_STATUS_FAIL_BT BIT(2)
#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */
/*
* SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command)
*/
-struct iwl_scanresults_notification {
+struct il_scanresults_notification {
u8 channel;
u8 band;
u8 probe_status;
@@ -2643,7 +2643,7 @@
/*
* SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command)
*/
-struct iwl_scancomplete_notification {
+struct il_scancomplete_notification {
u8 scanned_channels;
u8 status;
u8 last_channel;
@@ -2658,24 +2658,24 @@
*
*****************************************************************************/
-enum iwl_ibss_manager {
- IWL_NOT_IBSS_MANAGER = 0,
- IWL_IBSS_MANAGER = 1,
+enum il_ibss_manager {
+ IL_NOT_IBSS_MANAGER = 0,
+ IL_IBSS_MANAGER = 1,
};
/*
* BEACON_NOTIFICATION = 0x90 (notification only, not a command)
*/
-struct iwl3945_beacon_notif {
- struct iwl3945_tx_resp beacon_notify_hdr;
+struct il3945_beacon_notif {
+ struct il3945_tx_resp beacon_notify_hdr;
__le32 low_tsf;
__le32 high_tsf;
__le32 ibss_mgr_status;
} __packed;
-struct iwl4965_beacon_notif {
- struct iwl4965_tx_resp beacon_notify_hdr;
+struct il4965_beacon_notif {
+ struct il4965_tx_resp beacon_notify_hdr;
__le32 low_tsf;
__le32 high_tsf;
__le32 ibss_mgr_status;
@@ -2685,16 +2685,16 @@
* REPLY_TX_BEACON = 0x91 (command, has simple generic response)
*/
-struct iwl3945_tx_beacon_cmd {
- struct iwl3945_tx_cmd tx;
+struct il3945_tx_beacon_cmd {
+ struct il3945_tx_cmd tx;
__le16 tim_idx;
u8 tim_size;
u8 reserved1;
struct ieee80211_hdr frame[0]; /* beacon frame */
} __packed;
-struct iwl_tx_beacon_cmd {
- struct iwl_tx_cmd tx;
+struct il_tx_beacon_cmd {
+ struct il_tx_cmd tx;
__le16 tim_idx;
u8 tim_size;
u8 reserved1;
@@ -2707,7 +2707,7 @@
*
*****************************************************************************/
-#define IWL_TEMP_CONVERT 260
+#define IL_TEMP_CONVERT 260
#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
@@ -2977,10 +2977,10 @@
* STATISTICS_NOTIFICATIONs after received beacons (see below). This flag
* does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
*/
-#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
-#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
-struct iwl_statistics_cmd {
- __le32 configuration_flags; /* IWL_STATS_CONF_* */
+#define IL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
+#define IL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
+struct il_statistics_cmd {
+ __le32 configuration_flags; /* IL_STATS_CONF_* */
} __packed;
/*
@@ -3001,14 +3001,14 @@
#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
-struct iwl3945_notif_statistics {
+struct il3945_notif_statistics {
__le32 flag;
struct iwl39_statistics_rx rx;
struct iwl39_statistics_tx tx;
struct iwl39_statistics_general general;
} __packed;
-struct iwl_notif_statistics {
+struct il_notif_statistics {
__le32 flag;
struct statistics_rx rx;
struct statistics_tx tx;
@@ -3035,11 +3035,11 @@
*
*/
-#define IWL_MISSED_BEACON_THRESHOLD_MIN (1)
-#define IWL_MISSED_BEACON_THRESHOLD_DEF (5)
-#define IWL_MISSED_BEACON_THRESHOLD_MAX IWL_MISSED_BEACON_THRESHOLD_DEF
+#define IL_MISSED_BEACON_THRESHOLD_MIN (1)
+#define IL_MISSED_BEACON_THRESHOLD_DEF (5)
+#define IL_MISSED_BEACON_THRESHOLD_MAX IL_MISSED_BEACON_THRESHOLD_DEF
-struct iwl_missed_beacon_notif {
+struct il_missed_beacon_notif {
__le32 consecutive_missed_beacons;
__le32 total_missed_becons;
__le32 num_expected_beacons;
@@ -3111,7 +3111,7 @@
*
* Total number of false alarms = false_alarms + plcp_errs
*
- * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd
+ * For OFDM, adjust the following table entries in struct il_sensitivity_cmd
* (notice that the start points for OFDM are at or close to settings for
* maximum sensitivity):
*
@@ -3152,7 +3152,7 @@
* Reset this to 0 at the first beacon period that falls within the
* "good" range (5 to 50 false alarms per 204.8 milliseconds rx).
*
- * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd
+ * Then, adjust the following CCK table entries in struct il_sensitivity_cmd
* (notice that the start points for CCK are at maximum sensitivity):
*
* START / MIN / MAX
@@ -3217,7 +3217,7 @@
*/
/*
- * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd)
+ * Table entries in SENSITIVITY_CMD (struct il_sensitivity_cmd)
*/
#define HD_TABLE_SIZE (11) /* number of entries */
#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */
@@ -3232,18 +3232,18 @@
#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9)
#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
-/* Control field in struct iwl_sensitivity_cmd */
+/* Control field in struct il_sensitivity_cmd */
#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0)
#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1)
/**
- * struct iwl_sensitivity_cmd
+ * struct il_sensitivity_cmd
* @control: (1) updates working table, (0) updates default table
* @table: energy threshold values, use HD_* as index into table
*
* Always use "1" in "control" to update uCode's working table and DSP.
*/
-struct iwl_sensitivity_cmd {
+struct il_sensitivity_cmd {
__le16 control; /* always use "1" */
__le16 table[HD_TABLE_SIZE]; /* use HD_* as index */
} __packed;
@@ -3294,7 +3294,7 @@
* (accum_noise[i] - accum_noise[reference]) / 30
*
* The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB.
- * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the
+ * For use in diff_gain_[abc] fields of struct il_calibration_cmd, the
* driver should limit the difference results to a range of 0-3 (0-4.5 dB),
* and set bit 2 to indicate "reduce gain". The value for the reference
* (weakest) chain should be "0".
@@ -3306,24 +3306,24 @@
/* Phy calibration command for series */
/* The default calibrate table size if not specified by firmware */
-#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
+#define IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
enum {
- IWL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7,
- IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 19,
+ IL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7,
+ IL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 19,
};
-#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE (253)
+#define IL_MAX_PHY_CALIBRATE_TBL_SIZE (253)
-struct iwl_calib_hdr {
+struct il_calib_hdr {
u8 op_code;
u8 first_group;
u8 groups_num;
u8 data_valid;
} __packed;
-/* IWL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
-struct iwl_calib_diff_gain_cmd {
- struct iwl_calib_hdr hdr;
+/* IL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
+struct il_calib_diff_gain_cmd {
+ struct il_calib_hdr hdr;
s8 diff_gain_a; /* see above */
s8 diff_gain_b;
s8 diff_gain_c;
@@ -3343,7 +3343,7 @@
* For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
* this command turns it on or off, or sets up a periodic blinking cycle.
*/
-struct iwl_led_cmd {
+struct il_led_cmd {
__le32 interval; /* "interval" in uSec */
u8 id; /* 1: Activity, 2: Link, 3: Tech */
u8 off; /* # intervals off while blinking;
@@ -3360,7 +3360,7 @@
*
*****************************************************************************/
-struct iwl_rx_packet {
+struct il_rx_packet {
/*
* The first 4 bytes of the RX frame header contain both the RX frame
* size and some flags.
@@ -3372,27 +3372,27 @@
* 13-00: RX frame size
*/
__le32 len_n_flags;
- struct iwl_cmd_header hdr;
+ struct il_cmd_header hdr;
union {
- struct iwl3945_rx_frame rx_frame;
- struct iwl3945_tx_resp tx_resp;
- struct iwl3945_beacon_notif beacon_status;
+ struct il3945_rx_frame rx_frame;
+ struct il3945_tx_resp tx_resp;
+ struct il3945_beacon_notif beacon_status;
- struct iwl_alive_resp alive_frame;
- struct iwl_spectrum_notification spectrum_notif;
- struct iwl_csa_notification csa_notif;
- struct iwl_error_resp err_resp;
- struct iwl_card_state_notif card_state_notif;
- struct iwl_add_sta_resp add_sta;
- struct iwl_rem_sta_resp rem_sta;
- struct iwl_sleep_notification sleep_notif;
- struct iwl_spectrum_resp spectrum;
- struct iwl_notif_statistics stats;
- struct iwl_compressed_ba_resp compressed_ba;
- struct iwl_missed_beacon_notif missed_beacon;
+ struct il_alive_resp alive_frame;
+ struct il_spectrum_notification spectrum_notif;
+ struct il_csa_notification csa_notif;
+ struct il_error_resp err_resp;
+ struct il_card_state_notif card_state_notif;
+ struct il_add_sta_resp add_sta;
+ struct il_rem_sta_resp rem_sta;
+ struct il_sleep_notification sleep_notif;
+ struct il_spectrum_resp spectrum;
+ struct il_notif_statistics stats;
+ struct il_compressed_ba_resp compressed_ba;
+ struct il_missed_beacon_notif missed_beacon;
__le32 status;
u8 raw[0];
} u;
} __packed;
-#endif /* __iwl_legacy_commands_h__ */
+#endif /* __il_commands_h__ */