| /* interrupt.h */ |
| #ifndef _LINUX_INTERRUPT_H |
| #define _LINUX_INTERRUPT_H |
| |
| #include <linux/kernel.h> |
| #include <linux/linkage.h> |
| #include <linux/bitops.h> |
| #include <linux/preempt.h> |
| #include <linux/cpumask.h> |
| #include <linux/irqreturn.h> |
| #include <linux/hardirq.h> |
| #include <linux/sched.h> |
| #include <asm/atomic.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| |
| struct irqaction { |
| irqreturn_t (*handler)(int, void *, struct pt_regs *); |
| unsigned long flags; |
| cpumask_t mask; |
| const char *name; |
| void *dev_id; |
| struct irqaction *next; |
| int irq; |
| struct proc_dir_entry *dir; |
| }; |
| |
| extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs); |
| extern int request_irq(unsigned int, |
| irqreturn_t (*handler)(int, void *, struct pt_regs *), |
| unsigned long, const char *, void *); |
| extern void free_irq(unsigned int, void *); |
| |
| |
| #ifdef CONFIG_GENERIC_HARDIRQS |
| extern void disable_irq_nosync(unsigned int irq); |
| extern void disable_irq(unsigned int irq); |
| extern void enable_irq(unsigned int irq); |
| |
| /* IRQ wakeup (PM) control: */ |
| extern int set_irq_wake(unsigned int irq, unsigned int on); |
| |
| static inline int enable_irq_wake(unsigned int irq) |
| { |
| return set_irq_wake(irq, 1); |
| } |
| |
| static inline int disable_irq_wake(unsigned int irq) |
| { |
| return set_irq_wake(irq, 0); |
| } |
| |
| #endif |
| |
| #ifndef __ARCH_SET_SOFTIRQ_PENDING |
| #define set_softirq_pending(x) (local_softirq_pending() = (x)) |
| #define or_softirq_pending(x) (local_softirq_pending() |= (x)) |
| #endif |
| |
| /* |
| * Temporary defines for UP kernels, until all code gets fixed. |
| */ |
| #ifndef CONFIG_SMP |
| static inline void __deprecated cli(void) |
| { |
| local_irq_disable(); |
| } |
| static inline void __deprecated sti(void) |
| { |
| local_irq_enable(); |
| } |
| static inline void __deprecated save_flags(unsigned long *x) |
| { |
| local_save_flags(*x); |
| } |
| #define save_flags(x) save_flags(&x) |
| static inline void __deprecated restore_flags(unsigned long x) |
| { |
| local_irq_restore(x); |
| } |
| |
| static inline void __deprecated save_and_cli(unsigned long *x) |
| { |
| local_irq_save(*x); |
| } |
| #define save_and_cli(x) save_and_cli(&x) |
| #endif /* CONFIG_SMP */ |
| |
| /* SoftIRQ primitives. */ |
| #define local_bh_disable() \ |
| do { add_preempt_count(SOFTIRQ_OFFSET); barrier(); } while (0) |
| #define __local_bh_enable() \ |
| do { barrier(); sub_preempt_count(SOFTIRQ_OFFSET); } while (0) |
| |
| extern void local_bh_enable(void); |
| |
| /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high |
| frequency threaded job scheduling. For almost all the purposes |
| tasklets are more than enough. F.e. all serial device BHs et |
| al. should be converted to tasklets, not to softirqs. |
| */ |
| |
| enum |
| { |
| HI_SOFTIRQ=0, |
| TIMER_SOFTIRQ, |
| NET_TX_SOFTIRQ, |
| NET_RX_SOFTIRQ, |
| BLOCK_SOFTIRQ, |
| TASKLET_SOFTIRQ |
| }; |
| |
| /* softirq mask and active fields moved to irq_cpustat_t in |
| * asm/hardirq.h to get better cache usage. KAO |
| */ |
| |
| struct softirq_action |
| { |
| void (*action)(struct softirq_action *); |
| void *data; |
| }; |
| |
| asmlinkage void do_softirq(void); |
| extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data); |
| extern void softirq_init(void); |
| #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0) |
| extern void FASTCALL(raise_softirq_irqoff(unsigned int nr)); |
| extern void FASTCALL(raise_softirq(unsigned int nr)); |
| |
| |
| /* Tasklets --- multithreaded analogue of BHs. |
| |
| Main feature differing them of generic softirqs: tasklet |
| is running only on one CPU simultaneously. |
| |
| Main feature differing them of BHs: different tasklets |
| may be run simultaneously on different CPUs. |
| |
| Properties: |
| * If tasklet_schedule() is called, then tasklet is guaranteed |
| to be executed on some cpu at least once after this. |
| * If the tasklet is already scheduled, but its excecution is still not |
| started, it will be executed only once. |
| * If this tasklet is already running on another CPU (or schedule is called |
| from tasklet itself), it is rescheduled for later. |
| * Tasklet is strictly serialized wrt itself, but not |
| wrt another tasklets. If client needs some intertask synchronization, |
| he makes it with spinlocks. |
| */ |
| |
| struct tasklet_struct |
| { |
| struct tasklet_struct *next; |
| unsigned long state; |
| atomic_t count; |
| void (*func)(unsigned long); |
| unsigned long data; |
| }; |
| |
| #define DECLARE_TASKLET(name, func, data) \ |
| struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data } |
| |
| #define DECLARE_TASKLET_DISABLED(name, func, data) \ |
| struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data } |
| |
| |
| enum |
| { |
| TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */ |
| TASKLET_STATE_RUN /* Tasklet is running (SMP only) */ |
| }; |
| |
| #ifdef CONFIG_SMP |
| static inline int tasklet_trylock(struct tasklet_struct *t) |
| { |
| return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state); |
| } |
| |
| static inline void tasklet_unlock(struct tasklet_struct *t) |
| { |
| smp_mb__before_clear_bit(); |
| clear_bit(TASKLET_STATE_RUN, &(t)->state); |
| } |
| |
| static inline void tasklet_unlock_wait(struct tasklet_struct *t) |
| { |
| while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); } |
| } |
| #else |
| #define tasklet_trylock(t) 1 |
| #define tasklet_unlock_wait(t) do { } while (0) |
| #define tasklet_unlock(t) do { } while (0) |
| #endif |
| |
| extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t)); |
| |
| static inline void tasklet_schedule(struct tasklet_struct *t) |
| { |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) |
| __tasklet_schedule(t); |
| } |
| |
| extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t)); |
| |
| static inline void tasklet_hi_schedule(struct tasklet_struct *t) |
| { |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) |
| __tasklet_hi_schedule(t); |
| } |
| |
| |
| static inline void tasklet_disable_nosync(struct tasklet_struct *t) |
| { |
| atomic_inc(&t->count); |
| smp_mb__after_atomic_inc(); |
| } |
| |
| static inline void tasklet_disable(struct tasklet_struct *t) |
| { |
| tasklet_disable_nosync(t); |
| tasklet_unlock_wait(t); |
| smp_mb(); |
| } |
| |
| static inline void tasklet_enable(struct tasklet_struct *t) |
| { |
| smp_mb__before_atomic_dec(); |
| atomic_dec(&t->count); |
| } |
| |
| static inline void tasklet_hi_enable(struct tasklet_struct *t) |
| { |
| smp_mb__before_atomic_dec(); |
| atomic_dec(&t->count); |
| } |
| |
| extern void tasklet_kill(struct tasklet_struct *t); |
| extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); |
| extern void tasklet_init(struct tasklet_struct *t, |
| void (*func)(unsigned long), unsigned long data); |
| |
| /* |
| * Autoprobing for irqs: |
| * |
| * probe_irq_on() and probe_irq_off() provide robust primitives |
| * for accurate IRQ probing during kernel initialization. They are |
| * reasonably simple to use, are not "fooled" by spurious interrupts, |
| * and, unlike other attempts at IRQ probing, they do not get hung on |
| * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards). |
| * |
| * For reasonably foolproof probing, use them as follows: |
| * |
| * 1. clear and/or mask the device's internal interrupt. |
| * 2. sti(); |
| * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs |
| * 4. enable the device and cause it to trigger an interrupt. |
| * 5. wait for the device to interrupt, using non-intrusive polling or a delay. |
| * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple |
| * 7. service the device to clear its pending interrupt. |
| * 8. loop again if paranoia is required. |
| * |
| * probe_irq_on() returns a mask of allocated irq's. |
| * |
| * probe_irq_off() takes the mask as a parameter, |
| * and returns the irq number which occurred, |
| * or zero if none occurred, or a negative irq number |
| * if more than one irq occurred. |
| */ |
| |
| #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) |
| static inline unsigned long probe_irq_on(void) |
| { |
| return 0; |
| } |
| static inline int probe_irq_off(unsigned long val) |
| { |
| return 0; |
| } |
| static inline unsigned int probe_irq_mask(unsigned long val) |
| { |
| return 0; |
| } |
| #else |
| extern unsigned long probe_irq_on(void); /* returns 0 on failure */ |
| extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */ |
| extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */ |
| #endif |
| |
| #endif |