Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
tun: Persistent devices can get stuck in xoff state
xfrm: Add a XFRM_STATE_AF_UNSPEC flag to xfrm_usersa_info
ipv6: missed namespace context in ipv6_rthdr_rcv
netlabel: netlink_unicast calls kfree_skb on error path by itself
ipv4: fib_trie: Fix lookup error return
tcp: correct kcalloc usage
ip: sysctl documentation cleanup
Documentation: clarify tcp_{r,w}mem sysctl docs
netfilter: nf_nat_snmp_basic: fix a range check in NAT for SNMP
netfilter: nf_conntrack_tcp: fix endless loop
libertas: fix memory alignment problems on the blackfin
zd1211rw: stop beacons on remove_interface
rt2x00: Disable synchronization during initialization
rc80211_pid: Fix fast_start parameter handling
sctp: Add documentation for sctp sysctl variable
ipv6: fix race between ipv6_del_addr and DAD timer
irda: Fix netlink error path return value
irda: New device ID for nsc-ircc
irda: via-ircc proper dma freeing
sctp: Mark the tsn as received after all allocations finish
...
diff --git a/CREDITS b/CREDITS
index 8fec7b3..e97bea0 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2611,8 +2611,9 @@
S: Australia
N: Miguel Ojeda Sandonis
-E: maxextreme@gmail.com
-W: http://maxextreme.googlepages.com/
+E: miguel.ojeda.sandonis@gmail.com
+W: http://miguelojeda.es
+W: http://jair.lab.fi.uva.es/~migojed/
D: Author of the ks0108, cfag12864b and cfag12864bfb auxiliary display drivers.
D: Maintainer of the auxiliary display drivers tree (drivers/auxdisplay/*)
S: C/ Mieses 20, 9-B
diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt
index 8aa7529..cd784f4 100644
--- a/Documentation/accounting/taskstats-struct.txt
+++ b/Documentation/accounting/taskstats-struct.txt
@@ -24,6 +24,8 @@
4) Per-task and per-thread context switch count statistics
+5) Time accounting for SMT machines
+
Future extension should add fields to the end of the taskstats struct, and
should not change the relative position of each field within the struct.
@@ -164,4 +166,8 @@
__u64 nvcsw; /* Context voluntary switch counter */
__u64 nivcsw; /* Context involuntary switch counter */
+5) Time accounting for SMT machines
+ __u64 ac_utimescaled; /* utime scaled on frequency etc */
+ __u64 ac_stimescaled; /* stime scaled on frequency etc */
+ __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
}
diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b
index b714183..eb7be39 100644
--- a/Documentation/auxdisplay/cfag12864b
+++ b/Documentation/auxdisplay/cfag12864b
@@ -3,7 +3,7 @@
===================================
License: GPLv2
-Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Author & Maintainer: Miguel Ojeda Sandonis
Date: 2006-10-27
@@ -22,7 +22,7 @@
1. DRIVER INFORMATION
---------------------
-This driver support one cfag12864b display at time.
+This driver supports a cfag12864b LCD.
---------------------
diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c
index 7bfac35..2caeea5 100644
--- a/Documentation/auxdisplay/cfag12864b-example.c
+++ b/Documentation/auxdisplay/cfag12864b-example.c
@@ -4,7 +4,7 @@
* Description: cfag12864b LCD userspace example program
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
diff --git a/Documentation/auxdisplay/ks0108 b/Documentation/auxdisplay/ks0108
index 92b03b6..8ddda0c 100644
--- a/Documentation/auxdisplay/ks0108
+++ b/Documentation/auxdisplay/ks0108
@@ -3,7 +3,7 @@
==========================================
License: GPLv2
-Author & Maintainer: Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Author & Maintainer: Miguel Ojeda Sandonis
Date: 2006-10-27
@@ -21,7 +21,7 @@
1. DRIVER INFORMATION
---------------------
-This driver support the ks0108 LCD controller.
+This driver supports the ks0108 LCD controller.
---------------------
diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt
index 824fc02..d9014aa 100644
--- a/Documentation/cgroups.txt
+++ b/Documentation/cgroups.txt
@@ -390,6 +390,10 @@
...
# /bin/echo PIDn > tasks
+You can attach the current shell task by echoing 0:
+
+# echo 0 > tasks
+
3. Kernel API
=============
diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt
index 4dcea42..7cc6e6a 100644
--- a/Documentation/controllers/devices.txt
+++ b/Documentation/controllers/devices.txt
@@ -13,7 +13,7 @@
The root device cgroup starts with rwm to 'all'. A child device
cgroup gets a copy of the parent. Administrators can then remove
devices from the whitelist or add new entries. A child cgroup can
-never receive a device access which is denied its parent. However
+never receive a device access which is denied by its parent. However
when a device access is removed from a parent it will not also be
removed from the child(ren).
@@ -29,7 +29,11 @@
echo a > /cgroups/1/devices.deny
-will remove the default 'a *:* mrw' entry.
+will remove the default 'a *:* rwm' entry. Doing
+
+ echo a > /cgroups/1/devices.allow
+
+will add the 'a *:* rwm' entry to the whitelist.
3. Security
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 353504d..1f5a924 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -154,13 +154,15 @@
new system calls are added for cpusets - all support for querying and
modifying cpusets is via this cpuset file system.
-The /proc/<pid>/status file for each task has two added lines,
+The /proc/<pid>/status file for each task has four added lines,
displaying the tasks cpus_allowed (on which CPUs it may be scheduled)
and mems_allowed (on which Memory Nodes it may obtain memory),
-in the format seen in the following example:
+in the two formats seen in the following example:
Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff
+ Cpus_allowed_list: 0-127
Mems_allowed: ffffffff,ffffffff
+ Mems_allowed_list: 0-63
Each cpuset is represented by a directory in the cgroup file system
containing (on top of the standard cgroup files) the following
@@ -544,6 +546,9 @@
( 4 : search nodes in a chunk of node [on NUMA system] )
( 5 : search system wide [on NUMA system] )
+The system default is architecture dependent. The system default
+can be changed using the relax_domain_level= boot parameter.
+
This file is per-cpuset and affect the sched domain where the cpuset
belongs to. Therefore if the flag 'sched_load_balance' of a cpuset
is disabled, then 'sched_relax_domain_level' have no effect since
diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt
new file mode 100644
index 0000000..13e4bf0
--- /dev/null
+++ b/Documentation/ftrace.txt
@@ -0,0 +1,1353 @@
+ ftrace - Function Tracer
+ ========================
+
+Copyright 2008 Red Hat Inc.
+Author: Steven Rostedt <srostedt@redhat.com>
+
+
+Introduction
+------------
+
+Ftrace is an internal tracer designed to help out developers and
+designers of systems to find what is going on inside the kernel.
+It can be used for debugging or analyzing latencies and performance
+issues that take place outside of user-space.
+
+Although ftrace is the function tracer, it also includes an
+infrastructure that allows for other types of tracing. Some of the
+tracers that are currently in ftrace is a tracer to trace
+context switches, the time it takes for a high priority task to
+run after it was woken up, the time interrupts are disabled, and
+more.
+
+
+The File System
+---------------
+
+Ftrace uses the debugfs file system to hold the control files as well
+as the files to display output.
+
+To mount the debugfs system:
+
+ # mkdir /debug
+ # mount -t debugfs nodev /debug
+
+
+That's it! (assuming that you have ftrace configured into your kernel)
+
+After mounting the debugfs, you can see a directory called
+"tracing". This directory contains the control and output files
+of ftrace. Here is a list of some of the key files:
+
+
+ Note: all time values are in microseconds.
+
+ current_tracer : This is used to set or display the current tracer
+ that is configured.
+
+ available_tracers : This holds the different types of tracers that
+ has been compiled into the kernel. The tracers
+ listed here can be configured by echoing in their
+ name into current_tracer.
+
+ tracing_enabled : This sets or displays whether the current_tracer
+ is activated and tracing or not. Echo 0 into this
+ file to disable the tracer or 1 (or non-zero) to
+ enable it.
+
+ trace : This file holds the output of the trace in a human readable
+ format.
+
+ latency_trace : This file shows the same trace but the information
+ is organized more to display possible latencies
+ in the system.
+
+ trace_pipe : The output is the same as the "trace" file but this
+ file is meant to be streamed with live tracing.
+ Reads from this file will block until new data
+ is retrieved. Unlike the "trace" and "latency_trace"
+ files, this file is a consumer. This means reading
+ from this file causes sequential reads to display
+ more current data. Once data is read from this
+ file, it is consumed, and will not be read
+ again with a sequential read. The "trace" and
+ "latency_trace" files are static, and if the
+ tracer isn't adding more data, they will display
+ the same information every time they are read.
+
+ iter_ctrl : This file lets the user control the amount of data
+ that is displayed in one of the above output
+ files.
+
+ trace_max_latency : Some of the tracers record the max latency.
+ For example, the time interrupts are disabled.
+ This time is saved in this file. The max trace
+ will also be stored, and displayed by either
+ "trace" or "latency_trace". A new max trace will
+ only be recorded if the latency is greater than
+ the value in this file. (in microseconds)
+
+ trace_entries : This sets or displays the number of trace
+ entries each CPU buffer can hold. The tracer buffers
+ are the same size for each CPU, so care must be
+ taken when modifying the trace_entries. The number
+ of actually entries will be the number given
+ times the number of possible CPUS. The buffers
+ are saved as individual pages, and the actual entries
+ will always be rounded up to entries per page.
+
+ This can only be updated when the current_tracer
+ is set to "none".
+
+ NOTE: It is planned on changing the allocated buffers
+ from being the number of possible CPUS to
+ the number of online CPUS.
+
+ tracing_cpumask : This is a mask that lets the user only trace
+ on specified CPUS. The format is a hex string
+ representing the CPUS.
+
+ set_ftrace_filter : When dynamic ftrace is configured in, the
+ code is dynamically modified to disable calling
+ of the function profiler (mcount). This lets
+ tracing be configured in with practically no overhead
+ in performance. This also has a side effect of
+ enabling or disabling specific functions to be
+ traced. Echoing in names of functions into this
+ file will limit the trace to only those files.
+
+ set_ftrace_notrace: This has the opposite effect that
+ set_ftrace_filter has. Any function that is added
+ here will not be traced. If a function exists
+ in both set_ftrace_filter and set_ftrace_notrace
+ the function will _not_ bet traced.
+
+ available_filter_functions : When a function is encountered the first
+ time by the dynamic tracer, it is recorded and
+ later the call is converted into a nop. This file
+ lists the functions that have been recorded
+ by the dynamic tracer and these functions can
+ be used to set the ftrace filter by the above
+ "set_ftrace_filter" file.
+
+
+The Tracers
+-----------
+
+Here are the list of current tracers that can be configured.
+
+ ftrace - function tracer that uses mcount to trace all functions.
+ It is possible to filter out which functions that are
+ traced when dynamic ftrace is configured in.
+
+ sched_switch - traces the context switches between tasks.
+
+ irqsoff - traces the areas that disable interrupts and saves off
+ the trace with the longest max latency.
+ See tracing_max_latency. When a new max is recorded,
+ it replaces the old trace. It is best to view this
+ trace with the latency_trace file.
+
+ preemptoff - Similar to irqsoff but traces and records the time
+ preemption is disabled.
+
+ preemptirqsoff - Similar to irqsoff and preemptoff, but traces and
+ records the largest time irqs and/or preemption is
+ disabled.
+
+ wakeup - Traces and records the max latency that it takes for
+ the highest priority task to get scheduled after
+ it has been woken up.
+
+ none - This is not a tracer. To remove all tracers from tracing
+ simply echo "none" into current_tracer.
+
+
+Examples of using the tracer
+----------------------------
+
+Here are typical examples of using the tracers with only controlling
+them with the debugfs interface (without using any user-land utilities).
+
+Output format:
+--------------
+
+Here's an example of the output format of the file "trace"
+
+ --------
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4251 [01] 10152.583854: path_put <-path_walk
+ bash-4251 [01] 10152.583855: dput <-path_put
+ bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput
+ --------
+
+A header is printed with the trace that is represented. In this case
+the tracer is "ftrace". Then a header showing the format. Task name
+"bash", the task PID "4251", the CPU that it was running on
+"01", the timestamp in <secs>.<usecs> format, the function name that was
+traced "path_put" and the parent function that called this function
+"path_walk".
+
+The sched_switch tracer also includes tracing of task wake ups and
+context switches.
+
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R
+ events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R
+ kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R
+
+Wake ups are represented by a "+" and the context switches show
+"==>". The format is:
+
+ Context switches:
+
+ Previous task Next Task
+
+ <pid>:<prio>:<state> ==> <pid>:<prio>:<state>
+
+ Wake ups:
+
+ Current task Task waking up
+
+ <pid>:<prio>:<state> + <pid>:<prio>:<state>
+
+The prio is the internal kernel priority, which is inverse to the
+priority that is usually displayed by user-space tools. Zero represents
+the highest priority (99). Prio 100 starts the "nice" priorities with
+100 being equal to nice -20 and 139 being nice 19. The prio "140" is
+reserved for the idle task which is the lowest priority thread (pid 0).
+
+
+Latency trace format
+--------------------
+
+For traces that display latency times, the latency_trace file gives
+a bit more information to see why a latency happened. Here's a typical
+trace.
+
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: apic_timer_interrupt
+ => ended at: do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ <idle>-0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt)
+ <idle>-0 0d.s. 97us : __do_softirq (do_softirq)
+ <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq)
+
+
+vim:ft=help
+
+
+This shows that the current tracer is "irqsoff" tracing the time
+interrupts are disabled. It gives the trace version and the kernel
+this was executed on (2.6.26-rc8). Then it displays the max latency
+in microsecs (97 us). The number of trace entries displayed
+by the total number recorded (both are three: #3/3). The type of
+preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero
+and reserved for later use. #P is the number of online CPUS (#P:2).
+
+The task is the process that was running when the latency happened.
+(swapper pid: 0).
+
+The start and stop that caused the latencies:
+
+ apic_timer_interrupt is where the interrupts were disabled.
+ do_softirq is where they were enabled again.
+
+The next lines after the header are the trace itself. The header
+explains which is which.
+
+ cmd: The name of the process in the trace.
+
+ pid: The PID of that process.
+
+ CPU#: The CPU that the process was running on.
+
+ irqs-off: 'd' interrupts are disabled. '.' otherwise.
+
+ need-resched: 'N' task need_resched is set, '.' otherwise.
+
+ hardirq/softirq:
+ 'H' - hard irq happened inside a softirq.
+ 'h' - hard irq is running
+ 's' - soft irq is running
+ '.' - normal context.
+
+ preempt-depth: The level of preempt_disabled
+
+The above is mostly meaningful for kernel developers.
+
+ time: This differs from the trace output where as the trace output
+ contained a absolute timestamp. This timestamp is relative
+ to the start of the first entry in the the trace.
+
+ delay: This is just to help catch your eye a bit better. And
+ needs to be fixed to be only relative to the same CPU.
+ The marks is determined by the difference between this
+ current trace and the next trace.
+ '!' - greater than preempt_mark_thresh (default 100)
+ '+' - greater than 1 microsecond
+ ' ' - less than or equal to 1 microsecond.
+
+ The rest is the same as the 'trace' file.
+
+
+iter_ctrl
+---------
+
+The iter_ctrl file is used to control what gets printed in the trace
+output. To see what is available, simply cat the file:
+
+ cat /debug/tracing/iter_ctrl
+ print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
+ noblock nostacktrace nosched-tree
+
+To disable one of the options, echo in the option appended with "no".
+
+ echo noprint-parent > /debug/tracing/iter_ctrl
+
+To enable an option, leave off the "no".
+
+ echo sym-offest > /debug/tracing/iter_ctrl
+
+Here are the available options:
+
+ print-parent - On function traces, display the calling function
+ as well as the function being traced.
+
+ print-parent:
+ bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul
+
+ noprint-parent:
+ bash-4000 [01] 1477.606694: simple_strtoul
+
+
+ sym-offset - Display not only the function name, but also the offset
+ in the function. For example, instead of seeing just
+ "ktime_get" you will see "ktime_get+0xb/0x20"
+
+ sym-offset:
+ bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0
+
+ sym-addr - this will also display the function address as well as
+ the function name.
+
+ sym-addr:
+ bash-4000 [01] 1477.606694: simple_strtoul <c0339346>
+
+ verbose - This deals with the latency_trace file.
+
+ bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
+ (+0.000ms): simple_strtoul (strict_strtoul)
+
+ raw - This will display raw numbers. This option is best for use with
+ user applications that can translate the raw numbers better than
+ having it done in the kernel.
+
+ hex - similar to raw, but the numbers will be in a hexadecimal format.
+
+ bin - This will print out the formats in raw binary.
+
+ block - TBD (needs update)
+
+ stacktrace - This is one of the options that changes the trace itself.
+ When a trace is recorded, so is the stack of functions.
+ This allows for back traces of trace sites.
+
+ sched-tree - TBD (any users??)
+
+
+sched_switch
+------------
+
+This tracer simply records schedule switches. Here's an example
+on how to implement it.
+
+ # echo sched_switch > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # sleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+
+# tracer: sched_switch
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R
+ bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R
+ sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R
+ bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S
+ bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R
+ sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R
+ bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D
+ bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R
+ <idle>-0 [00] 240.132589: 0:140:R + 4:115:S
+ <idle>-0 [00] 240.132591: 0:140:R ==> 4:115:R
+ ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R
+ <idle>-0 [00] 240.132598: 0:140:R + 4:115:S
+ <idle>-0 [00] 240.132599: 0:140:R ==> 4:115:R
+ ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R
+ sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R
+ [...]
+
+
+As we have discussed previously about this format, the header shows
+the name of the trace and points to the options. The "FUNCTION"
+is a misnomer since here it represents the wake ups and context
+switches.
+
+The sched_switch only lists the wake ups (represented with '+')
+and context switches ('==>') with the previous task or current
+first followed by the next task or task waking up. The format for both
+of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO
+is the inverse of the actual priority with zero (0) being the highest
+priority and the nice values starting at 100 (nice -20). Below is
+a quick chart to map the kernel priority to user land priorities.
+
+ Kernel priority: 0 to 99 ==> user RT priority 99 to 0
+ Kernel priority: 100 to 139 ==> user nice -20 to 19
+ Kernel priority: 140 ==> idle task priority
+
+The task states are:
+
+ R - running : wants to run, may not actually be running
+ S - sleep : process is waiting to be woken up (handles signals)
+ D - deep sleep : process must be woken up (ignores signals)
+ T - stopped : process suspended
+ t - traced : process is being traced (with something like gdb)
+ Z - zombie : process waiting to be cleaned up
+ X - unknown
+
+
+ftrace_enabled
+--------------
+
+The following tracers give different output depending on whether
+or not the sysctl ftrace_enabled is set. To set ftrace_enabled,
+one can either use the sysctl function or set it via the proc
+file system interface.
+
+ sysctl kernel.ftrace_enabled=1
+
+ or
+
+ echo 1 > /proc/sys/kernel/ftrace_enabled
+
+To disable ftrace_enabled simply replace the '1' with '0' in
+the above commands.
+
+When ftrace_enabled is set the tracers will also record the functions
+that are within the trace. The descriptions of the tracers
+will also show an example with ftrace enabled.
+
+
+irqsoff
+-------
+
+When interrupts are disabled, the CPU can not react to any other
+external event (besides NMIs and SMIs). This prevents the timer
+interrupt from triggering or the mouse interrupt from letting the
+kernel know of a new mouse event. The result is a latency with the
+reaction time.
+
+The irqsoff tracer tracks the time interrupts are disabled and when
+they are re-enabled. When a new maximum latency is hit, it saves off
+the trace so that it may be retrieved at a later time. Every time a
+new maximum in reached, the old saved trace is discarded and the new
+trace is saved.
+
+To reset the maximum, echo 0 into tracing_max_latency. Here's an
+example:
+
+ # echo irqsoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 6 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: bash-4269 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: copy_page_range
+ => ended at: copy_page_range
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ bash-4269 1...1 0us+: _spin_lock (copy_page_range)
+ bash-4269 1...1 7us : _spin_unlock (copy_page_range)
+ bash-4269 1...2 7us : trace_preempt_on (copy_page_range)
+
+
+vim:ft=help
+
+Here we see that that we had a latency of 6 microsecs (which is
+very good). The spin_lock in copy_page_range disabled interrupts.
+The difference between the 6 and the displayed timestamp 7us is
+because the clock must have incremented between the time of recording
+the max latency and recording the function that had that latency.
+
+Note the above had ftrace_enabled not set. If we set the ftrace_enabled
+we get a much larger output:
+
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: __alloc_pages_internal
+ => ended at: __alloc_pages_internal
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal)
+ ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist)
+ ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk)
+ ls-4339 0d..1 4us : add_preempt_count (_spin_lock)
+ ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue)
+[...]
+ ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk)
+ ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock)
+ ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal)
+ ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal)
+
+
+vim:ft=help
+
+
+Here we traced a 50 microsecond latency. But we also see all the
+functions that were called during that time. Note that enabling
+function tracing we endure an added overhead. This overhead may
+extend the latency times. But never the less, this trace has provided
+some very helpful debugging.
+
+
+preemptoff
+----------
+
+When preemption is disabled we may be able to receive interrupts but
+the task can not be preempted and a higher priority task must wait
+for preemption to be enabled again before it can preempt a lower
+priority task.
+
+The preemptoff tracer traces the places that disables preemption.
+Like the irqsoff, it records the maximum latency that preemption
+was disabled. The control of preemptoff is much like the irqsoff.
+
+ # echo preemptoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: preemptoff
+#
+preemptoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: do_IRQ
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ sshd-4261 0d.h. 0us+: irq_enter (do_IRQ)
+ sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq)
+
+
+vim:ft=help
+
+This has some more changes. Preemption was disabled when an interrupt
+came in (notice the 'h'), and was enabled while doing a softirq.
+(notice the 's'). But we also see that interrupts have been disabled
+when entering the preempt off section and leaving it (the 'd').
+We do not know if interrupts were enabled in the mean time.
+
+# tracer: preemptoff
+#
+preemptoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: remove_wait_queue
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue)
+ sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue)
+ sshd-4261 0d..1 2us : do_IRQ (common_interrupt)
+ sshd-4261 0d..1 2us : irq_enter (do_IRQ)
+ sshd-4261 0d..1 2us : idle_cpu (irq_enter)
+ sshd-4261 0d..1 3us : add_preempt_count (irq_enter)
+ sshd-4261 0d.h1 3us : idle_cpu (irq_enter)
+ sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ)
+[...]
+ sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock)
+ sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq)
+ sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq)
+ sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock)
+ sshd-4261 0d.h1 14us : irq_exit (do_IRQ)
+ sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit)
+ sshd-4261 0d..2 15us : do_softirq (irq_exit)
+ sshd-4261 0d... 15us : __do_softirq (do_softirq)
+ sshd-4261 0d... 16us : __local_bh_disable (__do_softirq)
+ sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable)
+[...]
+ sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable)
+[...]
+ sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq)
+
+
+The above is an example of the preemptoff trace with ftrace_enabled
+set. Here we see that interrupts were disabled the entire time.
+The irq_enter code lets us know that we entered an interrupt 'h'.
+Before that, the functions being traced still show that it is not
+in an interrupt, but we can see by the functions themselves that
+this is not the case.
+
+Notice that the __do_softirq when called doesn't have a preempt_count.
+It may seem that we missed a preempt enabled. What really happened
+is that the preempt count is held on the threads stack and we
+switched to the softirq stack (4K stacks in effect). The code
+does not copy the preempt count, but because interrupts are disabled
+we don't need to worry about it. Having a tracer like this is good
+to let people know what really happens inside the kernel.
+
+
+preemptirqsoff
+--------------
+
+Knowing the locations that have interrupts disabled or preemption
+disabled for the longest times is helpful. But sometimes we would
+like to know when either preemption and/or interrupts are disabled.
+
+The following code:
+
+ local_irq_disable();
+ call_function_with_irqs_off();
+ preempt_disable();
+ call_function_with_irqs_and_preemption_off();
+ local_irq_enable();
+ call_function_with_preemption_off();
+ preempt_enable();
+
+The irqsoff tracer will record the total length of
+call_function_with_irqs_off() and
+call_function_with_irqs_and_preemption_off().
+
+The preemptoff tracer will record the total length of
+call_function_with_irqs_and_preemption_off() and
+call_function_with_preemption_off().
+
+But neither will trace the time that interrupts and/or preemption
+is disabled. This total time is the time that we can not schedule.
+To record this time, use the preemptirqsoff tracer.
+
+Again, using this trace is much like the irqsoff and preemptoff tracers.
+
+ # echo preemptoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: preemptirqsoff
+#
+preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: apic_timer_interrupt
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt)
+ ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq)
+ ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq)
+
+
+vim:ft=help
+
+
+The trace_hardirqs_off_thunk is called from assembly on x86 when
+interrupts are disabled in the assembly code. Without the function
+tracing, we don't know if interrupts were enabled within the preemption
+points. We do see that it started with preemption enabled.
+
+Here is a trace with ftrace_enabled set:
+
+
+# tracer: preemptirqsoff
+#
+preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: write_chan
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4473 0.N.. 0us : preempt_schedule (write_chan)
+ ls-4473 0dN.1 1us : _spin_lock (schedule)
+ ls-4473 0dN.1 2us : add_preempt_count (_spin_lock)
+ ls-4473 0d..2 2us : put_prev_task_fair (schedule)
+[...]
+ ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts)
+ ls-4473 0d..2 13us : __switch_to (schedule)
+ sshd-4261 0d..2 14us : finish_task_switch (schedule)
+ sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch)
+ sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave)
+ sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set)
+ sshd-4261 0d..2 16us : do_IRQ (common_interrupt)
+ sshd-4261 0d..2 17us : irq_enter (do_IRQ)
+ sshd-4261 0d..2 17us : idle_cpu (irq_enter)
+ sshd-4261 0d..2 18us : add_preempt_count (irq_enter)
+ sshd-4261 0d.h2 18us : idle_cpu (irq_enter)
+ sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ)
+ sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq)
+ sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock)
+ sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock)
+[...]
+ sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock)
+ sshd-4261 0d.h2 29us : irq_exit (do_IRQ)
+ sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit)
+ sshd-4261 0d..3 30us : do_softirq (irq_exit)
+ sshd-4261 0d... 30us : __do_softirq (do_softirq)
+ sshd-4261 0d... 31us : __local_bh_disable (__do_softirq)
+ sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable)
+[...]
+ sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt)
+ sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt)
+ sshd-4261 0d.s3 45us : idle_cpu (irq_enter)
+ sshd-4261 0d.s3 46us : add_preempt_count (irq_enter)
+ sshd-4261 0d.H3 46us : idle_cpu (irq_enter)
+ sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt)
+ sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt)
+[...]
+ sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt)
+ sshd-4261 0d.H3 82us : ktime_get (tick_program_event)
+ sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get)
+ sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts)
+ sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts)
+ sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event)
+ sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event)
+ sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt)
+ sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit)
+ sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit)
+ sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable)
+[...]
+ sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action)
+ sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq)
+ sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq)
+ sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable)
+ sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq)
+
+
+This is a very interesting trace. It started with the preemption of
+the ls task. We see that the task had the "need_resched" bit set
+with the 'N' in the trace. Interrupts are disabled in the spin_lock
+and the trace started. We see that a schedule took place to run
+sshd. When the interrupts were enabled we took an interrupt.
+On return of the interrupt the softirq ran. We took another interrupt
+while running the softirq as we see with the capital 'H'.
+
+
+wakeup
+------
+
+In Real-Time environment it is very important to know the wakeup
+time it takes for the highest priority task that wakes up to the
+time it executes. This is also known as "schedule latency".
+I stress the point that this is about RT tasks. It is also important
+to know the scheduling latency of non-RT tasks, but the average
+schedule latency is better for non-RT tasks. Tools like
+LatencyTop is more appropriate for such measurements.
+
+Real-Time environments is interested in the worst case latency.
+That is the longest latency it takes for something to happen, and
+not the average. We can have a very fast scheduler that may only
+have a large latency once in a while, but that would not work well
+with Real-Time tasks. The wakeup tracer was designed to record
+the worst case wakeups of RT tasks. Non-RT tasks are not recorded
+because the tracer only records one worst case and tracing non-RT
+tasks that are unpredictable will overwrite the worst case latency
+of RT tasks.
+
+Since this tracer only deals with RT tasks, we will run this slightly
+different than we did with the previous tracers. Instead of performing
+an 'ls' we will run 'sleep 1' under 'chrt' which changes the
+priority of the task.
+
+ # echo wakeup > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # chrt -f 5 sleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: wakeup
+#
+wakeup latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5)
+ -----------------
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ <idle>-0 1d.h4 0us+: try_to_wake_up (wake_up_process)
+ <idle>-0 1d..4 4us : schedule (cpu_idle)
+
+
+vim:ft=help
+
+
+Running this on an idle system we see that it only took 4 microseconds
+to perform the task switch. Note, since the trace marker in the
+schedule is before the actual "switch" we stop the tracing when
+the recorded task is about to schedule in. This may change if
+we add a new marker at the end of the scheduler.
+
+Notice that the recorded task is 'sleep' with the PID of 4901 and it
+has an rt_prio of 5. This priority is user-space priority and not
+the internal kernel priority. The policy is 1 for SCHED_FIFO and 2
+for SCHED_RR.
+
+Doing the same with chrt -r 5 and ftrace_enabled set.
+
+# tracer: wakeup
+#
+wakeup latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5)
+ -----------------
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process)
+ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb)
+ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up)
+ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup)
+ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr)
+ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup)
+ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up)
+ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up)
+[...]
+ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt)
+ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit)
+ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit)
+ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq)
+[...]
+ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks)
+ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq)
+ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable)
+ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd)
+ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd)
+ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched)
+ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched)
+ksoftirq-7 1.N.2 33us : schedule (__cond_resched)
+ksoftirq-7 1.N.2 33us : add_preempt_count (schedule)
+ksoftirq-7 1.N.3 34us : hrtick_clear (schedule)
+ksoftirq-7 1dN.3 35us : _spin_lock (schedule)
+ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock)
+ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule)
+ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair)
+[...]
+ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline)
+ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock)
+ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline)
+ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock)
+ksoftirq-7 1d..4 50us : schedule (__cond_resched)
+
+The interrupt went off while running ksoftirqd. This task runs at
+SCHED_OTHER. Why didn't we see the 'N' set early? This may be
+a harmless bug with x86_32 and 4K stacks. The need_reched() function
+that tests if we need to reschedule looks on the actual stack.
+Where as the setting of the NEED_RESCHED bit happens on the
+task's stack. But because we are in a hard interrupt, the test
+is with the interrupts stack which has that to be false. We don't
+see the 'N' until we switch back to the task's stack.
+
+ftrace
+------
+
+ftrace is not only the name of the tracing infrastructure, but it
+is also a name of one of the tracers. The tracer is the function
+tracer. Enabling the function tracer can be done from the
+debug file system. Make sure the ftrace_enabled is set otherwise
+this tracer is a nop.
+
+ # sysctl kernel.ftrace_enabled=1
+ # echo ftrace > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4003 [00] 123.638713: finish_task_switch <-schedule
+ bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch
+ bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq
+ bash-4003 [00] 123.638715: hrtick_set <-schedule
+ bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set
+ bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave
+ bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set
+ bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore
+ bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set
+ bash-4003 [00] 123.638718: sub_preempt_count <-schedule
+ bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule
+ bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run
+ bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion
+ bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common
+ bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq
+[...]
+
+
+Note: It is sometimes better to enable or disable tracing directly from
+a program, because the buffer may be overflowed by the echo commands
+before you get to the point you want to trace. It is also easier to
+stop the tracing at the point that you hit the part that you are
+interested in. Since the ftrace buffer is a ring buffer with the
+oldest data being overwritten, usually it is sufficient to start the
+tracer with an echo command but have you code stop it. Something
+like the following is usually appropriate for this.
+
+int trace_fd;
+[...]
+int main(int argc, char *argv[]) {
+ [...]
+ trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
+ [...]
+ if (condition_hit()) {
+ write(trace_fd, "0", 1);
+ }
+ [...]
+}
+
+
+dynamic ftrace
+--------------
+
+If CONFIG_DYNAMIC_FTRACE is set, then the system will run with
+virtually no overhead when function tracing is disabled. The way
+this works is the mcount function call (placed at the start of
+every kernel function, produced by the -pg switch in gcc), starts
+of pointing to a simple return.
+
+When dynamic ftrace is initialized, it calls kstop_machine to make it
+act like a uniprocessor so that it can freely modify code without
+worrying about other processors executing that same code. At
+initialization, the mcount calls are change to call a "record_ip"
+function. After this, the first time a kernel function is called,
+it has the calling address saved in a hash table.
+
+Later on the ftraced kernel thread is awoken and will again call
+kstop_machine if new functions have been recorded. The ftraced thread
+will change all calls to mcount to "nop". Just calling mcount
+and having mcount return has shown a 10% overhead. By converting
+it to a nop, there is no recordable overhead to the system.
+
+One special side-effect to the recording of the functions being
+traced, is that we can now selectively choose which functions we
+want to trace and which ones we want the mcount calls to remain as
+nops.
+
+Two files that contain to the enabling and disabling of recorded
+functions are:
+
+ set_ftrace_filter
+
+and
+
+ set_ftrace_notrace
+
+A list of available functions that you can add to this files is listed
+in:
+
+ available_filter_functions
+
+ # cat /debug/tracing/available_filter_functions
+put_prev_task_idle
+kmem_cache_create
+pick_next_task_rt
+get_online_cpus
+pick_next_task_fair
+mutex_lock
+[...]
+
+If I'm only interested in sys_nanosleep and hrtimer_interrupt:
+
+ # echo sys_nanosleep hrtimer_interrupt \
+ > /debug/tracing/set_ftrace_filter
+ # echo ftrace > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt
+ usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call
+ <idle>-0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt
+
+To see what functions are being traced, you can cat the file:
+
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_interrupt
+sys_nanosleep
+
+
+Perhaps this isn't enough. The filters also allow simple wild cards.
+Only the following is currently available
+
+ <match>* - will match functions that begins with <match>
+ *<match> - will match functions that end with <match>
+ *<match>* - will match functions that have <match> in it
+
+Thats all the wild cards that are allowed.
+
+ <match>*<match> will not work.
+
+ # echo hrtimer_* > /debug/tracing/set_ftrace_filter
+
+Produces:
+
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4003 [00] 1480.611794: hrtimer_init <-copy_process
+ bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set
+ bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear
+ bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel
+ <idle>-0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt
+
+
+Notice that we lost the sys_nanosleep.
+
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_run_queues
+hrtimer_run_pending
+hrtimer_init
+hrtimer_cancel
+hrtimer_try_to_cancel
+hrtimer_forward
+hrtimer_start
+hrtimer_reprogram
+hrtimer_force_reprogram
+hrtimer_get_next_event
+hrtimer_interrupt
+hrtimer_nanosleep
+hrtimer_wakeup
+hrtimer_get_remaining
+hrtimer_get_res
+hrtimer_init_sleeper
+
+
+This is because the '>' and '>>' act just like they do in bash.
+To rewrite the filters, use '>'
+To append to the filters, use '>>'
+
+To clear out a filter so that all functions will be recorded again.
+
+ # echo > /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+ #
+
+Again, now we want to append.
+
+ # echo sys_nanosleep > /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+sys_nanosleep
+ # echo hrtimer_* >> /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_run_queues
+hrtimer_run_pending
+hrtimer_init
+hrtimer_cancel
+hrtimer_try_to_cancel
+hrtimer_forward
+hrtimer_start
+hrtimer_reprogram
+hrtimer_force_reprogram
+hrtimer_get_next_event
+hrtimer_interrupt
+sys_nanosleep
+hrtimer_nanosleep
+hrtimer_wakeup
+hrtimer_get_remaining
+hrtimer_get_res
+hrtimer_init_sleeper
+
+
+The set_ftrace_notrace prevents those functions from being traced.
+
+ # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
+
+Produces:
+
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4043 [01] 115.281644: finish_task_switch <-schedule
+ bash-4043 [01] 115.281645: hrtick_set <-schedule
+ bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set
+ bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run
+ bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion
+ bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run
+ bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop
+ bash-4043 [01] 115.281648: wake_up_process <-kthread_stop
+ bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process
+
+We can see that there's no more lock or preempt tracing.
+
+ftraced
+-------
+
+As mentioned above, when dynamic ftrace is configured in, a kernel
+thread wakes up once a second and checks to see if there are mcount
+calls that need to be converted into nops. If there is not, then
+it simply goes back to sleep. But if there is, it will call
+kstop_machine to convert the calls to nops.
+
+There may be a case that you do not want this added latency.
+Perhaps you are doing some audio recording and this activity might
+cause skips in the playback. There is an interface to disable
+and enable the ftraced kernel thread.
+
+ # echo 0 > /debug/tracing/ftraced_enabled
+
+This will disable the calling of the kstop_machine to update the
+mcount calls to nops. Remember that there's a large overhead
+to calling mcount. Without this kernel thread, that overhead will
+exist.
+
+Any write to the ftraced_enabled file will cause the kstop_machine
+to run if there are recorded calls to mcount. This means that a
+user can manually perform the updates when they want to by simply
+echoing a '0' into the ftraced_enabled file.
+
+The updates are also done at the beginning of enabling a tracer
+that uses ftrace function recording.
+
+
+trace_pipe
+----------
+
+The trace_pipe outputs the same as trace, but the effect on the
+tracing is different. Every read from trace_pipe is consumed.
+This means that subsequent reads will be different. The trace
+is live.
+
+ # echo ftrace > /debug/tracing/current_tracer
+ # cat /debug/tracing/trace_pipe > /tmp/trace.out &
+[1] 4153
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+
+ #
+ # cat /tmp/trace.out
+ bash-4043 [00] 41.267106: finish_task_switch <-schedule
+ bash-4043 [00] 41.267106: hrtick_set <-schedule
+ bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set
+ bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run
+ bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion
+ bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run
+ bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop
+ bash-4043 [00] 41.267110: wake_up_process <-kthread_stop
+ bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process
+ bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up
+
+
+Note, reading the trace_pipe will block until more input is added.
+By changing the tracer, trace_pipe will issue an EOF. We needed
+to set the ftrace tracer _before_ cating the trace_pipe file.
+
+
+trace entries
+-------------
+
+Having too much or not enough data can be troublesome in diagnosing
+some issue in the kernel. The file trace_entries is used to modify
+the size of the internal trace buffers. The numbers listed
+is the number of entries that can be recorded per CPU. To know
+the full size, multiply the number of possible CPUS with the
+number of entries.
+
+ # cat /debug/tracing/trace_entries
+65620
+
+Note, to modify this you must have tracing fulling disabled. To do that,
+echo "none" into the current_tracer.
+
+ # echo none > /debug/tracing/current_tracer
+ # echo 100000 > /debug/tracing/trace_entries
+ # cat /debug/tracing/trace_entries
+100045
+
+
+Notice that we echoed in 100,000 but the size is 100,045. The entries
+are held by individual pages. It allocates the number of pages it takes
+to fulfill the request. If more entries may fit on the last page
+it will add them.
+
+ # echo 1 > /debug/tracing/trace_entries
+ # cat /debug/tracing/trace_entries
+85
+
+This shows us that 85 entries can fit on a single page.
+
+The number of pages that will be allocated is a percentage of available
+memory. Allocating too much will produces an error.
+
+ # echo 1000000000000 > /debug/tracing/trace_entries
+-bash: echo: write error: Cannot allocate memory
+ # cat /debug/tracing/trace_entries
+85
+
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e07c432..b52f47d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -295,7 +295,7 @@
when initialising the APIC and IO-APIC components.
apm= [APM] Advanced Power Management
- See header of arch/i386/kernel/apm.c.
+ See header of arch/x86/kernel/apm_32.c.
arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
Format: <io>,<irq>,<nodeID>
@@ -638,7 +638,7 @@
elanfreq= [X86-32]
See comment before function elanfreq_setup() in
- arch/i386/kernel/cpu/cpufreq/elanfreq.c.
+ arch/x86/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
@@ -1679,6 +1679,10 @@
Format: <reboot_mode>[,<reboot_mode2>[,...]]
See arch/*/kernel/reboot.c or arch/*/kernel/process.c
+ relax_domain_level=
+ [KNL, SMP] Set scheduler's default relax_domain_level.
+ See Documentation/cpusets.txt.
+
reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
reservetop= [X86-32]
diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c
index e4230ed..df32276 100644
--- a/Documentation/vm/slabinfo.c
+++ b/Documentation/vm/slabinfo.c
@@ -1,7 +1,7 @@
/*
* Slabinfo: Tool to get reports about slabs
*
- * (C) 2007 sgi, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 sgi, Christoph Lameter
*
* Compile by:
*
@@ -99,7 +99,7 @@
void usage(void)
{
- printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n"
+ printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n"
"slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n"
"-a|--aliases Show aliases\n"
"-A|--activity Most active slabs first\n"
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 7c13f22..bb1f5c6 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -266,4 +266,4 @@
slub_debug=FZ,dentry
-Christoph Lameter, <clameter@sgi.com>, May 30, 2007
+Christoph Lameter, May 30, 2007
diff --git a/MAINTAINERS b/MAINTAINERS
index e6c06fa..6476125 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -763,9 +763,10 @@
AUXILIARY DISPLAY DRIVERS
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
AVR32 ARCHITECTURE
@@ -1055,16 +1056,18 @@
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
CFAG12864BFB LCD FRAMEBUFFER DRIVER
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
CFG80211 and NL80211
@@ -1420,6 +1423,14 @@
L: linux-acpi@vger.kernel.org
S: Supported
+DOCUMENTATION (/Documentation directory)
+P: Michael Kerrisk
+M: mtk.manpages@gmail.com
+P: Randy Dunlap
+M: rdunlap@xenotime.net
+L: linux-doc@vger.kernel.org
+S: Maintained
+
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
@@ -1626,13 +1637,13 @@
EXT3 FILE SYSTEM
P: Stephen Tweedie, Andrew Morton
-M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com
+M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com
L: linux-ext4@vger.kernel.org
S: Maintained
EXT4 FILE SYSTEM
P: Stephen Tweedie, Andrew Morton
-M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com
+M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com
L: linux-ext4@vger.kernel.org
S: Maintained
@@ -2428,9 +2439,10 @@
KS0108 LCD CONTROLLER DRIVER
P: Miguel Ojeda Sandonis
-M: maxextreme@gmail.com
+M: miguel.ojeda.sandonis@gmail.com
L: linux-kernel@vger.kernel.org
-W: http://auxdisplay.googlepages.com/
+W: http://miguelojeda.es/auxdisplay.htm
+W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
LAPB module
@@ -2474,9 +2486,11 @@
W: http://www.hansenpartnership.com/voyager
S: Maintained
-LINUX FOR POWERPC
+LINUX FOR POWERPC (32-BIT AND 64-BIT)
P: Paul Mackerras
M: paulus@samba.org
+P: Benjamin Herrenschmidt
+M: benh@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git
@@ -2516,13 +2530,6 @@
L: linuxppc-dev@ozlabs.org
S: Maintained
-LINUX FOR POWERPC BOOT CODE
-P: Tom Rini
-M: trini@kernel.crashing.org
-W: http://www.penguinppc.org/
-L: linuxppc-dev@ozlabs.org
-S: Maintained
-
LINUX FOR POWERPC EMBEDDED PPC8XX
P: Vitaly Bordug
M: vitb@kernel.crashing.org
@@ -2551,17 +2558,6 @@
M: acme@ghostprotocols.net
S: Maintained
-LINUX FOR 64BIT POWERPC
-P: Paul Mackerras
-M: paulus@samba.org
-M: paulus@au.ibm.com
-P: Anton Blanchard
-M: anton@samba.org
-M: anton@au.ibm.com
-W: http://www.penguinppc.org/ppc64/
-L: linuxppc-dev@ozlabs.org
-S: Supported
-
LINUX SECURITY MODULE (LSM) FRAMEWORK
P: Chris Wright
M: chrisw@sous-sol.org
@@ -2680,8 +2676,8 @@
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: mtk.manpages@gmail.com
-W: ftp://ftp.kernel.org/pub/linux/docs/manpages
-S: Maintained
+W: http://www.kernel.org/doc/man-pages
+S: Supported
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
@@ -2814,6 +2810,12 @@
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
+MULTIFUNCTION DEVICES (MFD)
+P: Samuel Ortiz
+M: sameo@openedhand.com
+L: linux-kernel@vger.kernel.org
+S: Supported
+
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
M: drzeus-mmc@drzeus.cx
@@ -3195,8 +3197,8 @@
S: Maintained
PER-TASK DELAY ACCOUNTING
-P: Shailabh Nagar
-M: nagar@watson.ibm.com
+P: Balbir Singh
+M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -3688,7 +3690,7 @@
SLAB ALLOCATOR
P: Christoph Lameter
-M: clameter@sgi.com
+M: cl@linux-foundation.org
P: Pekka Enberg
M: penberg@cs.helsinki.fi
P: Matt Mackall
@@ -3898,8 +3900,8 @@
S: Maintained
TASKSTATS STATISTICS INTERFACE
-P: Shailabh Nagar
-M: nagar@watson.ibm.com
+P: Balbir Singh
+M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -3995,7 +3997,8 @@
S: Maintained
TPM DEVICE DRIVER
-P: Kylene Hall
+P: Debora Velarde
+P: Rajiv Andrade
M: tpmdd-devel@lists.sourceforge.net
W: http://tpmdd.sourceforge.net
P: Marcel Selhorst
diff --git a/Makefile b/Makefile
index 6aff5f4..6315424 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc9
NAME = Rotary Wombat
# *DOCUMENTATION*
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index f13249b..ef37fc1 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -25,6 +25,13 @@
} :kernel
_etext = .; /* End of text section */
+ NOTES :kernel :note
+ .dummy : {
+ *(.dummy)
+ } :kernel
+
+ RODATA
+
/* Exception table */
. = ALIGN(16);
__ex_table : {
@@ -33,13 +40,6 @@
__stop___ex_table = .;
}
- NOTES :kernel :note
- .dummy : {
- *(.dummy)
- } :kernel
-
- RODATA
-
/* Will be freed after init */
. = ALIGN(PAGE_SIZE);
/* Init code and data */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e5a7c5d..24c5dee 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1006,7 +1006,7 @@
config MIPS_L1_CACHE_SHIFT
int
default "4" if MACH_DECSTATION
- default "7" if SGI_IP27 || SGI_IP28 || SNI_RM
+ default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
default "4" if PMC_MSP4200_EVAL
default "5"
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 795cb8f..b5fc4eb 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -161,6 +161,9 @@
struct txx9_tmr_reg __iomem *tmrptr;
tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+ /* Start once to make CounterResetEnable effective */
+ __raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+ /* Stop and reset the counter */
__raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr);
__raw_writel(0, &tmrptr->tisr);
__raw_writel(0xffffffff, &tmrptr->cpra);
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 76935e3..27a5b46 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -26,7 +26,7 @@
static unsigned long icache_size, dcache_size; /* Size in bytes */
static unsigned long icache_lsize, dcache_lsize; /* Size in bytes */
-unsigned long __init r3k_cache_size(unsigned long ca_flags)
+unsigned long __cpuinit r3k_cache_size(unsigned long ca_flags)
{
unsigned long flags, status, dummy, size;
volatile unsigned long *p;
@@ -61,7 +61,7 @@
return size * sizeof(*p);
}
-unsigned long __init r3k_cache_lsize(unsigned long ca_flags)
+unsigned long __cpuinit r3k_cache_lsize(unsigned long ca_flags)
{
unsigned long flags, status, lsize, i;
volatile unsigned long *p;
@@ -90,7 +90,7 @@
return lsize * sizeof(*p);
}
-static void __init r3k_probe_cache(void)
+static void __cpuinit r3k_probe_cache(void)
{
dcache_size = r3k_cache_size(ST0_ISC);
if (dcache_size)
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 1edf0cb..1417c64 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -235,13 +235,12 @@
}
/*
* Too much unrolling will overflow the available space in
- * clear_space_array / copy_page_array. 8 words sounds generous,
- * but a R4000 with 128 byte L2 line length can exceed even that.
+ * clear_space_array / copy_page_array.
*/
- half_clear_loop_size = min(8 * clear_word_size,
+ half_clear_loop_size = min(16 * clear_word_size,
max(cache_line_size >> 1,
4 * clear_word_size));
- half_copy_loop_size = min(8 * copy_word_size,
+ half_copy_loop_size = min(16 * copy_word_size,
max(cache_line_size >> 1,
4 * copy_word_size));
}
@@ -263,21 +262,23 @@
if (pref_bias_clear_store) {
uasm_i_pref(buf, pref_dst_mode, pref_bias_clear_store + off,
A0);
- } else if (cpu_has_cache_cdex_s) {
- uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
- } else if (cpu_has_cache_cdex_p) {
- if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
+ } else if (cache_line_size == (half_clear_loop_size << 1)) {
+ if (cpu_has_cache_cdex_s) {
+ uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+ } else if (cpu_has_cache_cdex_p) {
+ if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ }
+
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ uasm_i_lw(buf, ZERO, ZERO, AT);
+
+ uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
}
-
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
- uasm_i_lw(buf, ZERO, ZERO, AT);
-
- uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
- }
+ }
}
void __cpuinit build_clear_page(void)
@@ -403,20 +404,22 @@
if (pref_bias_copy_store) {
uasm_i_pref(buf, pref_dst_mode, pref_bias_copy_store + off,
A0);
- } else if (cpu_has_cache_cdex_s) {
- uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
- } else if (cpu_has_cache_cdex_p) {
- if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
- uasm_i_nop(buf);
+ } else if (cache_line_size == (half_copy_loop_size << 1)) {
+ if (cpu_has_cache_cdex_s) {
+ uasm_i_cache(buf, Create_Dirty_Excl_SD, off, A0);
+ } else if (cpu_has_cache_cdex_p) {
+ if (R4600_V1_HIT_CACHEOP_WAR && cpu_is_r4600_v1_x()) {
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ uasm_i_nop(buf);
+ }
+
+ if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
+ uasm_i_lw(buf, ZERO, ZERO, AT);
+
+ uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
}
-
- if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
- uasm_i_lw(buf, ZERO, ZERO, AT);
-
- uasm_i_cache(buf, Create_Dirty_Excl_D, off, A0);
}
}
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index fc227f3..e3abfb2 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -86,7 +86,7 @@
/*
* This function is executed in uncached address space.
*/
-static __init void __rm7k_sc_enable(void)
+static __cpuinit void __rm7k_sc_enable(void)
{
int i;
@@ -107,7 +107,7 @@
}
}
-static __init void rm7k_sc_enable(void)
+static __cpuinit void rm7k_sc_enable(void)
{
if (read_c0_config() & RM7K_CONF_SE)
return;
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index b0ea0e4..0d6b666 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -425,6 +425,11 @@
BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31);
crime_int = crime->istat & crime_mask;
+
+ /* crime sometime delivers spurious interrupts, ignore them */
+ if (unlikely(crime_int == 0))
+ return;
+
irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
if (crime_int & CRIME_MACEISA_INT_MASK) {
diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c
index 6d19628..f9eb975 100644
--- a/arch/mn10300/kernel/mn10300_ksyms.c
+++ b/arch/mn10300/kernel/mn10300_ksyms.c
@@ -10,8 +10,11 @@
*/
#include <linux/module.h>
#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+EXPORT_SYMBOL(empty_zero_page);
+
EXPORT_SYMBOL(change_bit);
EXPORT_SYMBOL(test_and_change_bit);
@@ -31,7 +34,9 @@
extern u64 __ashldi3(u64, unsigned);
extern u64 __lshrdi3(u64, unsigned);
extern s64 __negdi2(s64);
+extern int __ucmpdi2(u64, u64);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__negdi2);
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 9c623c8..b28c9a6 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -153,6 +153,7 @@
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0,
NULL, NULL);
}
+EXPORT_SYMBOL(kernel_thread);
/*
* free current thread data structures etc..
diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile
index fdfa9ec..0cd2346 100644
--- a/arch/mn10300/lib/Makefile
+++ b/arch/mn10300/lib/Makefile
@@ -4,4 +4,4 @@
lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o
lib-y += do_csum.o
-lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o
+lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o __ucmpdi2.o
diff --git a/arch/mn10300/lib/__ucmpdi2.S b/arch/mn10300/lib/__ucmpdi2.S
new file mode 100644
index 0000000..60dcbdf
--- /dev/null
+++ b/arch/mn10300/lib/__ucmpdi2.S
@@ -0,0 +1,43 @@
+/* __ucmpdi2.S: 64-bit unsigned compare
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+ .text
+ .p2align 4
+
+###############################################################################
+#
+# int __ucmpdi2(unsigned long long a [D0:D1],
+# unsigned long long b [(SP,12),(SP,16)])
+#
+# - returns 0, 1, or 2 as a <, =, > b respectively.
+#
+###############################################################################
+ .globl __ucmpdi2
+ .type __ucmpdi2,@function
+__ucmpdi2:
+ mov (12,sp),a0 # b.lsw
+ mov (16,sp),a1 # b.msw
+
+ sub a0,d0
+ subc a1,d1 # may clear Z, never sets it
+ bne __ucmpdi2_differ # a.msw != b.msw
+ mov +1,d0
+ rets
+
+__ucmpdi2_differ:
+ # C flag is set if LE, clear if GE
+ subc d0,d0 # -1 if LE, 0 if GE
+ add +1,d0 # 0 if LE, 1 if GE
+ add d0,d0 # 0 if LE, 2 if GE
+ rets
+
+ .size __ucmpdi2, .-__ucmpdi2
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index cf37f5c..4d96e1d 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -33,13 +33,14 @@
phys_addr_t taddr;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
-static struct __initdata of_device_id parents[] = {
+static struct __initdata of_device_id legacy_serial_parents[] = {
{.type = "soc",},
{.type = "tsi-bridge",},
{.type = "opb", },
{.compatible = "ibm,opb",},
{.compatible = "simple-bus",},
{.compatible = "wrs,epld-localbus",},
+ {},
};
static unsigned int legacy_serial_count;
@@ -327,7 +328,7 @@
struct device_node *parent = of_get_parent(np);
if (!parent)
continue;
- if (of_match_node(parents, parent) != NULL) {
+ if (of_match_node(legacy_serial_parents, parent) != NULL) {
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index e79ad8a..3f37a6e 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -76,6 +76,8 @@
return NULL;
dev->dma_mask = 0xffffffffUL;
+ dev->dev.coherent_dma_mask = DMA_32BIT_MASK;
+
dev->dev.bus = &of_platform_bus_type;
/* We do not fill the DMA ops for platform devices by default.
diff --git a/arch/um/Makefile b/arch/um/Makefile
index dbeab15..ca40397 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -77,7 +77,6 @@
KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \
-Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES))
KBUILD_CFLAGS += $(KERNEL_DEFINES)
-KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,)
PHONY += linux
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 561e373..302cbe5 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -32,4 +32,11 @@
# an unresolved reference.
cflags-y += -ffreestanding
+# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+# a lot more stack due to the lack of sharing of stacklots. Also, gcc
+# 4.3.0 needs -funit-at-a-time for extern inline functions.
+KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+ echo $(call cc-option,-fno-unit-at-a-time); \
+ else echo $(call cc-option,-funit-at-a-time); fi ;)
+
KBUILD_CFLAGS += $(cflags-y)
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index 8ed362f..a9cd7e7 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -21,3 +21,6 @@
LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
LINK-y += -m64
+
+# Do unit-at-a-time unconditionally on x86_64, following the host
+KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
diff --git a/arch/x86/kernel/.gitignore b/arch/x86/kernel/.gitignore
index 4ea38a3..08f4fd7 100644
--- a/arch/x86/kernel/.gitignore
+++ b/arch/x86/kernel/.gitignore
@@ -1,2 +1,3 @@
vsyscall.lds
vsyscall_32.lds
+vmlinux.lds
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
index f9b77fb..3355973 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -5,6 +5,7 @@
#include <asm/msr-index.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/processor-flags.h>
.code16
.section ".header", "a"
@@ -24,6 +25,11 @@
realmode_flags: .long 0
real_magic: .long 0
trampoline_segment: .word 0
+_pad1: .byte 0
+wakeup_jmp: .byte 0xea /* ljmpw */
+wakeup_jmp_off: .word 3f
+wakeup_jmp_seg: .word 0
+wakeup_gdt: .quad 0, 0, 0
signature: .long 0x51ee1111
.text
@@ -34,11 +40,34 @@
cli
cld
+ /* Apparently some dimwit BIOS programmers don't know how to
+ program a PM to RM transition, and we might end up here with
+ junk in the data segment descriptor registers. The only way
+ to repair that is to go into PM and fix it ourselves... */
+ movw $16, %cx
+ lgdtl %cs:wakeup_gdt
+ movl %cr0, %eax
+ orb $X86_CR0_PE, %al
+ movl %eax, %cr0
+ jmp 1f
+1: ljmpw $8, $2f
+2:
+ movw %cx, %ds
+ movw %cx, %es
+ movw %cx, %ss
+ movw %cx, %fs
+ movw %cx, %gs
+
+ andb $~X86_CR0_PE, %al
+ movl %eax, %cr0
+ jmp wakeup_jmp
+3:
/* Set up segments */
movw %cs, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %ss
+ lidtl wakeup_idt
movl $wakeup_stack_end, %esp
@@ -98,7 +127,14 @@
jmp 1b
.data
- .balign 4
+ .balign 8
+
+ /* This is the standard real-mode IDT */
+wakeup_idt:
+ .word 0xffff /* limit */
+ .long 0 /* address */
+ .word 0
+
.globl HEAP, heap_end
HEAP:
.long wakeup_heap
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h
index ef8166f..69d38d0 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.h
+++ b/arch/x86/kernel/acpi/realmode/wakeup.h
@@ -24,6 +24,11 @@
u32 realmode_flags;
u32 real_magic;
u16 trampoline_segment; /* segment with trampoline code, 64-bit only */
+ u8 _pad1;
+ u8 wakeup_jmp;
+ u16 wakeup_jmp_off;
+ u16 wakeup_jmp_seg;
+ u64 wakeup_gdt[3];
u32 signature; /* To check we have correct structure */
} __attribute__((__packed__));
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index afc25ee..36af01f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -50,6 +50,20 @@
header->video_mode = saved_video_mode;
+ header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
+ /* GDT[0]: GDT self-pointer */
+ header->wakeup_gdt[0] =
+ (u64)(sizeof(header->wakeup_gdt) - 1) +
+ ((u64)(acpi_wakeup_address +
+ ((char *)&header->wakeup_gdt - (char *)acpi_realmode))
+ << 16);
+ /* GDT[1]: real-mode-like code segment */
+ header->wakeup_gdt[1] = (0x009bULL << 40) +
+ ((u64)acpi_wakeup_address << 16) + 0xffff;
+ /* GDT[2]: real-mode-like data segment */
+ header->wakeup_gdt[2] = (0x0093ULL << 40) +
+ ((u64)acpi_wakeup_address << 16) + 0xffff;
+
#ifndef CONFIG_64BIT
store_gdt((struct desc_ptr *)&header->pmode_gdt);
@@ -111,7 +125,7 @@
return;
}
- acpi_wakeup_address = acpi_realmode;
+ acpi_wakeup_address = virt_to_phys((void *)acpi_realmode);
}
diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c
index 5d23d85..4b63c8e 100644
--- a/arch/x86/kernel/efi_32.c
+++ b/arch/x86/kernel/efi_32.c
@@ -49,13 +49,13 @@
local_irq_save(efi_rt_eflags);
/*
- * If I don't have PSE, I should just duplicate two entries in page
- * directory. If I have PSE, I just need to duplicate one entry in
+ * If I don't have PAE, I should just duplicate two entries in page
+ * directory. If I have PAE, I just need to duplicate one entry in
* page directory.
*/
cr4 = read_cr4();
- if (cr4 & X86_CR4_PSE) {
+ if (cr4 & X86_CR4_PAE) {
efi_bak_pg_dir_pointer[0].pgd =
swapper_pg_dir[pgd_index(0)].pgd;
swapper_pg_dir[0].pgd =
@@ -93,7 +93,7 @@
cr4 = read_cr4();
- if (cr4 & X86_CR4_PSE) {
+ if (cr4 & X86_CR4_PAE) {
swapper_pg_dir[pgd_index(0)].pgd =
efi_bak_pg_dir_pointer[0].pgd;
} else {
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 10a1955..b817974 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -128,7 +128,7 @@
/* Fixup phys_base */
addq %rbp, phys_base(%rip)
-#ifdef CONFIG_SMP
+#ifdef CONFIG_X86_TRAMPOLINE
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
#endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index f6d20be..819dad9 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -506,7 +506,7 @@
static void __init early_memtest(unsigned long start, unsigned long end)
{
- unsigned long t_start, t_size;
+ u64 t_start, t_size;
unsigned pattern;
if (!memtest_pattern)
@@ -525,8 +525,9 @@
if (t_start + t_size > end)
t_size = end - t_start;
- printk(KERN_CONT "\n %016lx - %016lx pattern %d",
- t_start, t_start + t_size, pattern);
+ printk(KERN_CONT "\n %016llx - %016llx pattern %d",
+ (unsigned long long)t_start,
+ (unsigned long long)t_start + t_size, pattern);
memtest(t_start, t_size, pattern);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 2b2bb3f9..d1b8671 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -300,6 +300,29 @@
}
EXPORT_SYMBOL(ioremap_cache);
+static void __iomem *ioremap_default(resource_size_t phys_addr,
+ unsigned long size)
+{
+ unsigned long flags;
+ void *ret;
+ int err;
+
+ /*
+ * - WB for WB-able memory and no other conflicting mappings
+ * - UC_MINUS for non-WB-able memory with no other conflicting mappings
+ * - Inherit from confliting mappings otherwise
+ */
+ err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+ if (err < 0)
+ return NULL;
+
+ ret = (void *) __ioremap_caller(phys_addr, size, flags,
+ __builtin_return_address(0));
+
+ free_memtype(phys_addr, phys_addr + size);
+ return (void __iomem *)ret;
+}
+
/**
* iounmap - Free a IO remapping
* @addr: virtual address from ioremap_*
@@ -365,7 +388,7 @@
if (page_is_ram(start >> PAGE_SHIFT))
return __va(phys);
- addr = (void *)ioremap(start, PAGE_SIZE);
+ addr = (void *)ioremap_default(start, PAGE_SIZE);
if (addr)
addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 940185e..6e64aaf 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -328,18 +328,18 @@
#endif
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL360",
+ .ident = "HP ProLiant DL385 G2",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL380",
+ .ident = "HP ProLiant DL585 G2",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
},
},
{}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index df40bf7..4e527e7 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -185,7 +185,7 @@
if (val & _PAGE_PRESENT) {
unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
pteval_t flags = val & ~PTE_MASK;
- val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
+ val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
}
return val;
@@ -196,7 +196,7 @@
if (val & _PAGE_PRESENT) {
unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
pteval_t flags = val & ~PTE_MASK;
- val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
+ val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
}
return val;
diff --git a/crypto/chainiv.c b/crypto/chainiv.c
index 6da3f57..9affade 100644
--- a/crypto/chainiv.c
+++ b/crypto/chainiv.c
@@ -117,6 +117,7 @@
static int async_chainiv_schedule_work(struct async_chainiv_ctx *ctx)
{
int queued;
+ int err = ctx->err;
if (!ctx->queue.qlen) {
smp_mb__before_clear_bit();
@@ -131,7 +132,7 @@
BUG_ON(!queued);
out:
- return ctx->err;
+ return err;
}
static int async_chainiv_postpone_request(struct skcipher_givcrypt_request *req)
@@ -227,6 +228,7 @@
postponed);
struct skcipher_givcrypt_request *req;
struct ablkcipher_request *subreq;
+ int err;
/* Only handle one request at a time to avoid hogging keventd. */
spin_lock_bh(&ctx->lock);
@@ -241,7 +243,11 @@
subreq = skcipher_givcrypt_reqctx(req);
subreq->base.flags |= CRYPTO_TFM_REQ_MAY_SLEEP;
- async_chainiv_givencrypt_tail(req);
+ err = async_chainiv_givencrypt_tail(req);
+
+ local_bh_disable();
+ skcipher_givcrypt_complete(req, err);
+ local_bh_enable();
}
static int async_chainiv_init(struct crypto_tfm *tfm)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 6beabc5..e47f6e0 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -586,12 +586,6 @@
j = 0;
for (i = 0; i < tcount; i++) {
- data = kzalloc(template[i].ilen, GFP_KERNEL);
- if (!data)
- continue;
-
- memcpy(data, template[i].input, template[i].ilen);
-
if (template[i].iv)
memcpy(iv, template[i].iv, MAX_IVLEN);
else
@@ -613,10 +607,8 @@
printk("setkey() failed flags=%x\n",
crypto_ablkcipher_get_flags(tfm));
- if (!template[i].fail) {
- kfree(data);
+ if (!template[i].fail)
goto out;
- }
}
temp = 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index c3b0cd8..495c63a 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -36,9 +36,8 @@
if (!acpi_wakeup_address) {
return -EFAULT;
}
- acpi_set_firmware_waking_vector((acpi_physical_address)
- virt_to_phys((void *)
- acpi_wakeup_address));
+ acpi_set_firmware_waking_vector(
+ (acpi_physical_address)acpi_wakeup_address);
}
ACPI_FLUSH_CPU_CACHE();
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 224c57c..4ebbba2 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -315,8 +315,11 @@
cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control);
if (acpi_gbl_FADT.month_alarm)
cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control);
- if (acpi_gbl_FADT.century)
+ if (acpi_gbl_FADT.century) {
+ if (adjust)
+ yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100;
cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control);
+ }
/* enable the rtc alarm interrupt */
rtc_control |= RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6a4a2a2..5e6468a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1777,7 +1777,7 @@
struct ahci_host_priv *hpriv;
unsigned int i, handled = 0;
void __iomem *mmio;
- u32 irq_stat, irq_ack = 0;
+ u32 irq_stat, irq_masked;
VPRINTK("ENTER\n");
@@ -1786,16 +1786,17 @@
/* sigh. 0xffffffff is a valid return from h/w */
irq_stat = readl(mmio + HOST_IRQ_STAT);
- irq_stat &= hpriv->port_map;
if (!irq_stat)
return IRQ_NONE;
+ irq_masked = irq_stat & hpriv->port_map;
+
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap;
- if (!(irq_stat & (1 << i)))
+ if (!(irq_masked & (1 << i)))
continue;
ap = host->ports[i];
@@ -1809,14 +1810,20 @@
"interrupt on disabled port %u\n", i);
}
- irq_ack |= (1 << i);
- }
-
- if (irq_ack) {
- writel(irq_ack, mmio + HOST_IRQ_STAT);
handled = 1;
}
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
+ * it should be cleared after all the port events are cleared;
+ * otherwise, it will raise a spurious interrupt after each
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
+ * information.
+ *
+ * Also, use the unmasked value to clear interrupt as spurious
+ * pending event on a dummy port might cause screaming IRQ.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 215d186..c0908c2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1094,6 +1094,7 @@
int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq)
{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags = 0;
int poll_next;
@@ -1125,9 +1126,12 @@
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this */
+ ata_ehi_push_desc(ehi,
+ "ST_FIRST: !(DRQ|ERR|DF)");
qc->err_mask |= AC_ERR_HSM;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1146,9 +1150,9 @@
* the CDB.
*/
if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
- ata_port_printk(ap, KERN_WARNING,
- "DRQ=1 with device error, "
- "dev_stat 0x%X\n", status);
+ ata_ehi_push_desc(ehi, "ST_FIRST: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1205,9 +1209,9 @@
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
- "device error, dev_stat 0x%X\n",
- status);
+ ata_ehi_push_desc(ehi, "ST-ATAPI: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1226,13 +1230,17 @@
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this.
* Phantom devices also trigger this
* condition. Mark hint.
*/
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1257,8 +1265,12 @@
status = ata_wait_idle(ap);
}
- if (status & (ATA_BUSY | ATA_DRQ))
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "BUSY|DRQ persists on ERR|DF, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
+ }
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 28092bc..ad169ff 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1607,7 +1607,7 @@
* Much of the time, this could just work regardless.
* So for now, just log the incident, and allow the attempt.
*/
- if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+ if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
--limit_warnings;
ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
": attempting PIO w/multiple DRQ: "
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 8ee6b5b..84ffcc2 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -370,6 +370,7 @@
{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
+ { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f277cea..db529b8 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -83,6 +83,7 @@
.inherits = &ata_bmdma_port_ops,
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
+ .hardreset = ATA_OP_NULL,
};
static const struct ata_port_info uli_port_info = {
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 043353b..14b9d5f 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -64,7 +64,7 @@
Amount of time the ks0108 should wait between each control write
to the parallel port.
- If your driver seems to miss random writings, increment this.
+ If your LCD seems to miss random writings, increment this.
If you don't know what I'm talking about, ignore it.
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index 80bb061..683509f 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: ks0108
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -398,5 +398,5 @@
module_exit(cfag12864b_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("cfag12864b LCD driver");
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index 307c190..fe3a865 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: cfag12864b
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -186,5 +186,5 @@
module_exit(cfag12864bfb_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("cfag12864b LCD framebuffer driver");
diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c
index e6c3646..5b93852 100644
--- a/drivers/auxdisplay/ks0108.c
+++ b/drivers/auxdisplay/ks0108.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: parport
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -173,6 +173,6 @@
module_exit(ks0108_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("ks0108 LCD Controller driver");
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 39f3d1b..0f867a0 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -84,8 +84,8 @@
nid, K(i.totalram),
nid, K(i.freeram),
nid, K(i.totalram - i.freeram),
- nid, node_page_state(nid, NR_ACTIVE),
- nid, node_page_state(nid, NR_INACTIVE),
+ nid, K(node_page_state(nid, NR_ACTIVE)),
+ nid, K(node_page_state(nid, NR_INACTIVE)),
#ifdef CONFIG_HIGHMEM
nid, K(i.totalhigh),
nid, K(i.freehigh),
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 5f1e1cc..d81632c 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -106,35 +106,34 @@
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
- * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access, 512},
- {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
- {0x40820E11, "Smart Array 532", &SA5B_access, 512},
- {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
- {0x409A0E11, "Smart Array 641", &SA5_access, 512},
- {0x409B0E11, "Smart Array 642", &SA5_access, 512},
- {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
- {0x40910E11, "Smart Array 6i", &SA5_access, 512},
- {0x3225103C, "Smart Array P600", &SA5_access, 512},
- {0x3223103C, "Smart Array P800", &SA5_access, 512},
- {0x3234103C, "Smart Array P400", &SA5_access, 512},
- {0x3235103C, "Smart Array P400i", &SA5_access, 512},
- {0x3211103C, "Smart Array E200i", &SA5_access, 120},
- {0x3212103C, "Smart Array E200", &SA5_access, 120},
- {0x3213103C, "Smart Array E200i", &SA5_access, 120},
- {0x3214103C, "Smart Array E200i", &SA5_access, 120},
- {0x3215103C, "Smart Array E200i", &SA5_access, 120},
- {0x3237103C, "Smart Array E500", &SA5_access, 512},
- {0x323D103C, "Smart Array P700m", &SA5_access, 512},
- {0x3241103C, "Smart Array P212", &SA5_access, 384},
- {0x3243103C, "Smart Array P410", &SA5_access, 384},
- {0x3245103C, "Smart Array P410i", &SA5_access, 384},
- {0x3247103C, "Smart Array P411", &SA5_access, 384},
- {0x3249103C, "Smart Array P812", &SA5_access, 384},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
+ {0x40700E11, "Smart Array 5300", &SA5_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5_access},
+ {0x409B0E11, "Smart Array 642", &SA5_access},
+ {0x409C0E11, "Smart Array 6400", &SA5_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
+ {0x40910E11, "Smart Array 6i", &SA5_access},
+ {0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x3235103C, "Smart Array P400i", &SA5_access},
+ {0x3211103C, "Smart Array E200i", &SA5_access},
+ {0x3212103C, "Smart Array E200", &SA5_access},
+ {0x3213103C, "Smart Array E200i", &SA5_access},
+ {0x3214103C, "Smart Array E200i", &SA5_access},
+ {0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3086,11 +3085,20 @@
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
- c->nr_cmds = products[i].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
@@ -3110,7 +3118,7 @@
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
- c->nr_cmds = products[i-1].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "
@@ -3546,6 +3554,10 @@
for (j = 0; j <= hba[i]->highest_lun; j++)
add_disk(hba[i]->gendisk[j]);
+ /* we must register the controller even if no disks exist */
+ if (hba[i]->highest_lun == -1)
+ add_disk(hba[i]->gendisk[0]);
+
return 1;
clean4:
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bbd2834..008c38b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -28,12 +28,18 @@
comment "I2C GPIO expanders:"
config GPIO_PCA953X
- tristate "PCA953x I/O ports"
+ tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
depends on I2C
help
- Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit),
- PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539
- (16-bit) I/O ports. These parts are made by NXP and TI.
+ Say yes here to provide access to several register-oriented
+ SMBus I/O expanders, made mostly by NXP or TI. Compatible
+ models include:
+
+ 4 bits: pca9536, pca9537
+
+ 8 bits: max7310, pca9534, pca9538, pca9554, pca9557
+
+ 16 bits: pca9535, pca9539, pca9555
This driver can also be built as a module. If so, the module
will be called pca953x.
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 7e40e8a..a380730 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -33,7 +33,7 @@
{ "pca9554", 8, },
{ "pca9555", 16, },
{ "pca9557", 8, },
- /* REVISIT several pca955x parts should work here too */
+ { "max7310", 8, },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 26df06f..50f2269 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -516,17 +516,23 @@
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p"),
{ .ident = NULL }
};
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index cc24803..2f2b4f4 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -76,7 +76,7 @@
#include "../ide-timing.h"
-static long ide_palm_clk;
+static unsigned ideclk_period; /* in nanoseconds */
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
{160, 240}, /* UDMA Mode 0 */
@@ -86,8 +86,6 @@
{85, 60}, /* UDMA Mode 4 */
};
-static struct clk *ideclkp;
-
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
unsigned int mode)
{
@@ -97,10 +95,10 @@
/* DMA Data Setup */
t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
- ide_palm_clk) - 1;
- tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1;
+ ideclk_period) - 1;
+ tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
- ide_palm_clk) - 1;
+ ideclk_period) - 1;
/* udmatim Register */
val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
@@ -141,8 +139,8 @@
cycletime = max_t(int, t->cycle, min_cycle);
/* DMA Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
- td = DIV_ROUND_UP(t->active, ide_palm_clk);
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ td = DIV_ROUND_UP(t->active, ideclk_period);
tkw = t0 - td - 1;
td -= 1;
@@ -168,9 +166,9 @@
struct ide_timing *t;
/* PIO Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
- ide_palm_clk);
+ ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
@@ -192,8 +190,8 @@
/* TASKFILE Setup */
t = ide_timing_find_mode(XFER_PIO_0 + mode);
- t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk);
- t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk);
+ t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+ t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
@@ -350,22 +348,22 @@
static int __devinit palm_bk3710_probe(struct platform_device *pdev)
{
- struct clk *clkp;
+ struct clk *clk;
struct resource *mem, *irq;
ide_hwif_t *hwif;
- unsigned long base;
+ unsigned long base, rate;
int i;
hw_regs_t hw;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- clkp = clk_get(NULL, "IDECLK");
- if (IS_ERR(clkp))
+ clk = clk_get(NULL, "IDECLK");
+ if (IS_ERR(clk))
return -ENODEV;
- ideclkp = clkp;
- clk_enable(ideclkp);
- ide_palm_clk = clk_get_rate(ideclkp)/100000;
- ide_palm_clk = (10000/ide_palm_clk) + 1;
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+ ideclk_period = 1000000000UL / rate;
+
/* Register the IDE interface with Linux ATA Interface */
memset(&hw, 0, sizeof(hw));
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 380fa0c..26e68b6 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -646,8 +646,6 @@
goto out;
}
- get_device(&hwif->gendev);
-
hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
MKDEV(0, 0), hwif, hwif->name);
if (IS_ERR(hwif->portdev)) {
@@ -1220,16 +1218,12 @@
complete(&drive->gendev_rel_comp);
}
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
if (!hwif->irq) {
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
printk("%s: DISABLED, NO IRQ\n", hwif->name);
return 0;
@@ -1259,7 +1253,7 @@
* It failed to initialise. Find the default IRQ for
* this port and try that.
*/
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
printk("%s: Disabled unable to get IRQ %d.\n",
hwif->name, old_irq);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index c758dcb..300431d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -315,13 +315,14 @@
BUG_ON(in_interrupt());
BUG_ON(irqs_disabled());
- mutex_lock(&ide_cfg_mtx);
- spin_lock_irq(&ide_lock);
- if (!hwif->present)
- goto abort;
- __ide_port_unregister_devices(hwif);
- hwif->present = 0;
+ mutex_lock(&ide_cfg_mtx);
+
+ spin_lock_irq(&ide_lock);
+ if (hwif->present) {
+ __ide_port_unregister_devices(hwif);
+ hwif->present = 0;
+ }
spin_unlock_irq(&ide_lock);
ide_proc_unregister_port(hwif);
@@ -351,16 +352,15 @@
blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
kfree(hwif->sg_table);
unregister_blkdev(hwif->major, hwif->name);
- spin_lock_irq(&ide_lock);
if (hwif->dma_base)
ide_release_dma_engine(hwif);
+ spin_lock_irq(&ide_lock);
/* restore hwif data to pristine status */
ide_init_port_data(hwif, hwif->index);
-
-abort:
spin_unlock_irq(&ide_lock);
+
mutex_unlock(&ide_cfg_mtx);
}
@@ -1094,13 +1094,6 @@
EXPORT_SYMBOL_GPL(ide_bus_type);
-static void ide_port_class_release(struct device *portdev)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- put_device(&hwif->gendev);
-}
-
int ide_vlb_clk;
EXPORT_SYMBOL_GPL(ide_vlb_clk);
@@ -1305,7 +1298,6 @@
ret = PTR_ERR(ide_port_class);
goto out_port_class;
}
- ide_port_class->dev_release = ide_port_class_release;
init_ide_data();
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 9053c877..2b71bdf 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -184,8 +184,7 @@
static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
- return 0;
+ return ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index fec4955..a7a41bb 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -225,10 +225,6 @@
return 1;
}
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -288,7 +284,7 @@
}
if (!using_inta)
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
hwif->irq = hwif->mate->irq; /* share IRQ with mate */
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 8934178..95f82cf 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1096,7 +1096,9 @@
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
+ rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
+ rtnl_unlock();
return sprintf(buf, "%s\n", info.fw_version);
}
@@ -1109,7 +1111,9 @@
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
+ rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
+ rtnl_unlock();
return sprintf(buf, "%s\n", info.driver);
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 54c8ee2..3b27df5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2017,12 +2017,7 @@
*/
s->uptodate++;
return 0; /* uptodate + compute == disks */
- } else if ((s->uptodate < disks - 1) &&
- test_bit(R5_Insync, &dev->flags)) {
- /* Note: we hold off compute operations while checks are
- * in flight, but we still prefer 'compute' over 'read'
- * hence we only read if (uptodate < * disks-1)
- */
+ } else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 65210fc..d89475d 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -114,6 +114,7 @@
unsigned int nob = data->blocks;
unsigned long long clks;
unsigned int timeout;
+ bool dalgn = 0;
u32 dcmd;
int i;
@@ -152,6 +153,9 @@
host->sg_cpu[i].dcmd = dcmd | length;
if (length & 31 && !(data->flags & MMC_DATA_READ))
host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
+ /* Not aligned to 8-byte boundary? */
+ if (sg_dma_address(&data->sg[i]) & 0x7)
+ dalgn = 1;
if (data->flags & MMC_DATA_READ) {
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
@@ -165,6 +169,15 @@
host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
wmb();
+ /*
+ * The PXA27x DMA controller encounters overhead when working with
+ * unaligned (to 8-byte boundaries) data, so switch on byte alignment
+ * mode only if we have unaligned data.
+ */
+ if (dalgn)
+ DALGN |= (1 << host->dma);
+ else
+ DALGN &= (1 << host->dma);
DDADR(host->dma) = host->sg_dma;
DCSR(host->dma) = DCSR_RUN;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 07c2048..b413aa6 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -55,6 +55,10 @@
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9)
+/* Controller has an off-by-one issue with timeout value */
+#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -115,7 +119,8 @@
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
},
{
@@ -124,7 +129,17 @@
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_INCR_TIMEOUT_CONTROL,
},
{
@@ -469,6 +484,13 @@
break;
}
+ /*
+ * Compensate for an off-by-one error in the CaFe hardware; otherwise,
+ * a too-small count gives us interrupt timeouts.
+ */
+ if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL))
+ count++;
+
if (count >= 0xF) {
printk(KERN_WARNING "%s: Too large timeout requested!\n",
mmc_hostname(host->mmc));
@@ -774,6 +796,14 @@
BUG();
}
+ /*
+ * At least the CaFe chip gets confused if we set the voltage
+ * and set turn on power at the same time, so set the voltage first.
+ */
+ if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+ writeb(pwr & ~SDHCI_POWER_ON,
+ host->ioaddr + SDHCI_POWER_CONTROL);
+
writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
out:
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a3497dc..338a3f9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1727,6 +1727,7 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 7e3ad4f..58b7336 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -126,12 +126,25 @@
int err;
struct rtc_time before, now;
int first_time = 1;
+ unsigned long t_now, t_alm;
+ enum { none, day, month, year } missing = none;
+ unsigned days;
- /* The lower level RTC driver may not be capable of filling
- * in all fields of the rtc_time struct (eg. rtc-cmos),
- * and so might instead return -1 in some fields.
- * We deal with that here by grabbing a current RTC timestamp
- * and using values from that for any missing (-1) values.
+ /* The lower level RTC driver may return -1 in some fields,
+ * creating invalid alarm->time values, for reasons like:
+ *
+ * - The hardware may not be capable of filling them in;
+ * many alarms match only on time-of-day fields, not
+ * day/month/year calendar data.
+ *
+ * - Some hardware uses illegal values as "wildcard" match
+ * values, which non-Linux firmware (like a BIOS) may try
+ * to set up as e.g. "alarm 15 minutes after each hour".
+ * Linux uses only oneshot alarms.
+ *
+ * When we see that here, we deal with it by using values from
+ * a current RTC timestamp for any missing (-1) values. The
+ * RTC driver prevents "periodic alarm" modes.
*
* But this can be racey, because some fields of the RTC timestamp
* may have wrapped in the interval since we read the RTC alarm,
@@ -174,6 +187,10 @@
if (!alarm->enabled)
return 0;
+ /* full-function RTCs won't have such missing fields */
+ if (rtc_valid_tm(&alarm->time) == 0)
+ return 0;
+
/* get the "after" timestamp, to detect wrapped fields */
err = rtc_read_time(rtc, &now);
if (err < 0)
@@ -183,22 +200,85 @@
} while ( before.tm_min != now.tm_min
|| before.tm_hour != now.tm_hour
|| before.tm_mon != now.tm_mon
- || before.tm_year != now.tm_year
- || before.tm_isdst != now.tm_isdst);
+ || before.tm_year != now.tm_year);
- /* Fill in any missing alarm fields using the timestamp */
+ /* Fill in the missing alarm fields using the timestamp; we
+ * know there's at least one since alarm->time is invalid.
+ */
if (alarm->time.tm_sec == -1)
alarm->time.tm_sec = now.tm_sec;
if (alarm->time.tm_min == -1)
alarm->time.tm_min = now.tm_min;
if (alarm->time.tm_hour == -1)
alarm->time.tm_hour = now.tm_hour;
- if (alarm->time.tm_mday == -1)
+
+ /* For simplicity, only support date rollover for now */
+ if (alarm->time.tm_mday == -1) {
alarm->time.tm_mday = now.tm_mday;
- if (alarm->time.tm_mon == -1)
+ missing = day;
+ }
+ if (alarm->time.tm_mon == -1) {
alarm->time.tm_mon = now.tm_mon;
- if (alarm->time.tm_year == -1)
+ if (missing == none)
+ missing = month;
+ }
+ if (alarm->time.tm_year == -1) {
alarm->time.tm_year = now.tm_year;
+ if (missing == none)
+ missing = year;
+ }
+
+ /* with luck, no rollover is needed */
+ rtc_tm_to_time(&now, &t_now);
+ rtc_tm_to_time(&alarm->time, &t_alm);
+ if (t_now < t_alm)
+ goto done;
+
+ switch (missing) {
+
+ /* 24 hour rollover ... if it's now 10am Monday, an alarm that
+ * that will trigger at 5am will do so at 5am Tuesday, which
+ * could also be in the next month or year. This is a common
+ * case, especially for PCs.
+ */
+ case day:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day");
+ t_alm += 24 * 60 * 60;
+ rtc_time_to_tm(t_alm, &alarm->time);
+ break;
+
+ /* Month rollover ... if it's the 31th, an alarm on the 3rd will
+ * be next month. An alarm matching on the 30th, 29th, or 28th
+ * may end up in the month after that! Many newer PCs support
+ * this type of alarm.
+ */
+ case month:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month");
+ do {
+ if (alarm->time.tm_mon < 11)
+ alarm->time.tm_mon++;
+ else {
+ alarm->time.tm_mon = 0;
+ alarm->time.tm_year++;
+ }
+ days = rtc_month_days(alarm->time.tm_mon,
+ alarm->time.tm_year);
+ } while (days < alarm->time.tm_mday);
+ break;
+
+ /* Year rollover ... easy except for leap years! */
+ case year:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year");
+ do {
+ alarm->time.tm_year++;
+ } while (!rtc_valid_tm(&alarm->time));
+ break;
+
+ default:
+ dev_warn(&rtc->dev, "alarm rollover not handled\n");
+ }
+
+done:
return 0;
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index eaf5594..7dcfba1 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -71,6 +71,7 @@
#define X1205_SR_RTCF 0x01 /* Clock failure */
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+#define X1205_SR_AL0 0x20 /* Alarm 0 match */
#define X1205_DTR_DTR0 0x01
#define X1205_DTR_DTR1 0x02
@@ -78,6 +79,8 @@
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
+
static struct i2c_driver x1205_driver;
/*
@@ -89,8 +92,8 @@
unsigned char reg_base)
{
unsigned char dt_addr[2] = { 0, reg_base };
-
unsigned char buf[8];
+ int i;
struct i2c_msg msgs[] = {
{ client->addr, 0, 2, dt_addr }, /* setup read ptr */
@@ -98,7 +101,7 @@
};
/* read date registers */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -110,6 +113,11 @@
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
+ /* Mask out the enable bits if these are alarm registers */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] &= 0x7F;
+
tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
tm->tm_min = BCD2BIN(buf[CCR_MIN]);
tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
@@ -138,7 +146,7 @@
};
/* read status register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -147,10 +155,11 @@
}
static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
+ int datetoo, u8 reg_base, unsigned char alm_enable)
{
- int i, xfer;
+ int i, xfer, nbytes;
unsigned char buf[8];
+ unsigned char rdata[10] = { 0, reg_base };
static const unsigned char wel[3] = { 0, X1205_REG_SR,
X1205_SR_WEL };
@@ -189,6 +198,11 @@
buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
}
+ /* If writing alarm registers, set compare bits on registers 0-4 */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] |= 0x80;
+
/* this sequence is required to unlock the chip */
if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
@@ -200,19 +214,57 @@
return -EIO;
}
- /* write register's data */
- for (i = 0; i < (datetoo ? 8 : 3); i++) {
- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
- xfer = i2c_master_send(client, rdata, 3);
+ /* write register's data */
+ if (datetoo)
+ nbytes = 8;
+ else
+ nbytes = 3;
+ for (i = 0; i < nbytes; i++)
+ rdata[2+i] = buf[i];
+
+ xfer = i2c_master_send(client, rdata, nbytes+2);
+ if (xfer != nbytes+2) {
+ dev_err(&client->dev,
+ "%s: result=%d addr=%02x, data=%02x\n",
+ __func__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+
+ /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
+ if (reg_base < X1205_CCR_BASE) {
+ unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
+
+ msleep(10);
+
+ /* ...and set or clear the AL0E bit in the INT register */
+
+ /* Need to set RWEL again as the write has cleared it */
+ xfer = i2c_master_send(client, rwel, 3);
if (xfer != 3) {
dev_err(&client->dev,
- "%s: xfer=%d addr=%02x, data=%02x\n",
+ "%s: aloe rwel - %d\n",
__func__,
- xfer, rdata[1], rdata[2]);
+ xfer);
return -EIO;
}
- };
+
+ if (alm_enable)
+ al0e[2] = X1205_INT_AL0E;
+
+ xfer = i2c_master_send(client, al0e, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: al0e - %d\n",
+ __func__,
+ xfer);
+ return -EIO;
+ }
+
+ /* and wait 10msec again for this write to complete */
+ msleep(10);
+ }
/* disable further writes */
if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
@@ -230,9 +282,9 @@
tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
- if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
- dev_err(&client->dev,
- "unable to restart the oscillator\n");
+ err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0);
+ if (err < 0)
+ dev_err(&client->dev, "unable to restart the oscillator\n");
return err;
}
@@ -248,7 +300,7 @@
};
/* read dtr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -280,7 +332,7 @@
};
/* read atr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -403,14 +455,33 @@
static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- return x1205_get_datetime(to_i2c_client(dev),
- &alrm->time, X1205_ALM0_BASE);
+ int err;
+ unsigned char intreg, status;
+ static unsigned char int_addr[2] = { 0, X1205_REG_INT };
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, int_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */
+ };
+
+ /* read interrupt register and status register */
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __func__);
+ return -EIO;
+ }
+ err = x1205_get_status(client, &status);
+ if (err == 0) {
+ alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
+ alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
+ err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
+ }
+ return err;
}
static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
return x1205_set_datetime(to_i2c_client(dev),
- &alrm->time, 1, X1205_ALM0_BASE);
+ &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled);
}
static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -422,7 +493,7 @@
static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
return x1205_set_datetime(to_i2c_client(dev),
- tm, 1, X1205_CCR_BASE);
+ tm, 1, X1205_CCR_BASE, 0);
}
static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c9b64e7..42d2e10 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1991,7 +1991,9 @@
static int serial_match_port(struct device *dev, void *data)
{
struct uart_match *match = data;
- dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+ struct tty_driver *tty_drv = match->driver->tty_driver;
+ dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+ match->port->line;
return dev->devt == devt; /* Actually, only one tty per port */
}
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 799337f..f5b60c7 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -167,14 +167,14 @@
mutex_lock(&spidev->buf_lock);
status = spidev_sync_read(spidev, count);
- if (status == 0) {
+ if (status > 0) {
unsigned long missing;
- missing = copy_to_user(buf, spidev->buffer, count);
- if (count && missing == count)
+ missing = copy_to_user(buf, spidev->buffer, status);
+ if (missing == status)
status = -EFAULT;
else
- status = count - missing;
+ status = status - missing;
}
mutex_unlock(&spidev->buf_lock);
@@ -200,8 +200,6 @@
missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) {
status = spidev_sync_write(spidev, count);
- if (status == 0)
- status = count;
} else
status = -EFAULT;
mutex_unlock(&spidev->buf_lock);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 63c3404..c3201aff 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1125,9 +1125,6 @@
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->ru[i].urb);
- INIT_LIST_HEAD(&acm->filled_read_bufs);
- INIT_LIST_HEAD(&acm->spare_read_bufs);
-
tasklet_enable(&acm->urb_task);
cancel_work_sync(&acm->work);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 09a53e7..42a4364 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,6 +924,15 @@
return retval;
}
+void usb_enable_root_hub_irq (struct usb_bus *bus)
+{
+ struct usb_hcd *hcd;
+
+ hcd = container_of (bus, struct usb_hcd, self);
+ if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
+ hcd->driver->hub_irq_enable (hcd);
+}
+
/*-------------------------------------------------------------------------*/
@@ -1684,19 +1693,30 @@
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
- int start = hcd->state;
+ unsigned long flags;
+ irqreturn_t rc;
- if (unlikely(start == HC_STATE_HALT ||
- !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
- return IRQ_NONE;
- if (hcd->driver->irq (hcd) == IRQ_NONE)
- return IRQ_NONE;
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ if (unlikely(hcd->state == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ rc = IRQ_NONE;
+ } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+ rc = IRQ_NONE;
+ } else {
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (unlikely(hcd->state == HC_STATE_HALT))
- usb_hc_died (hcd);
- return IRQ_HANDLED;
+ if (unlikely(hcd->state == HC_STATE_HALT))
+ usb_hc_died(hcd);
+ rc = IRQ_HANDLED;
+ }
+
+ local_irq_restore(flags);
+ return rc;
}
/*-------------------------------------------------------------------------*/
@@ -1860,6 +1880,13 @@
/* enable irqs just before we start the controller */
if (hcd->driver->irq) {
+
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ irqflags &= ~IRQF_DISABLED;
+
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index a0bf5df..b9de156 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -210,6 +210,8 @@
int (*bus_suspend)(struct usb_hcd *);
int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+ void (*hub_irq_enable)(struct usb_hcd *);
+ /* Needed only if port-change IRQs are level-triggered */
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94789be..4cfe32a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -713,18 +713,11 @@
}
/* Was the power session lost while we were suspended? */
- switch (type) {
- case HUB_RESET_RESUME:
- portstatus = 0;
- portchange = USB_PORT_STAT_C_CONNECTION;
- break;
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
- case HUB_RESET:
- case HUB_RESUME:
- status = hub_port_status(hub, port1,
- &portstatus, &portchange);
- break;
- }
+ /* If the device is gone, khubd will handle it later */
+ if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION))
+ continue;
/* For "USB_PERSIST"-enabled children we must
* mark the child device for reset-resume and
@@ -2080,6 +2073,8 @@
}
clear_bit(port1, hub->busy_bits);
+ if (!hub->hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hub->hdev->bus);
if (status == 0)
status = finish_port_resume(udev);
@@ -3009,6 +3004,11 @@
hub->activating = 0;
+ /* If this is a root hub, tell the HCD it's okay to
+ * re-enable port-change interrupts now. */
+ if (!hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hdev->bus);
+
loop_autopm:
/* Allow autosuspend if we're not going to run again */
if (list_empty(&hub->event_list))
@@ -3234,6 +3234,8 @@
break;
}
clear_bit(port1, parent_hub->busy_bits);
+ if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+ usb_enable_root_hub_irq(parent_hdev->bus);
if (ret < 0)
goto re_enumerate;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 35a0309..90245fd 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -177,6 +177,15 @@
static inline void
timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
{
+ /* Don't override timeouts which shrink or (later) disable
+ * the async ring; just the I/O watchdog. Note that if a
+ * SHRINK were pending, OFF would never be requested.
+ */
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
+
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
@@ -192,15 +201,7 @@
t = EHCI_SHRINK_JIFFIES;
break;
}
- t += jiffies;
- // all timings except IAA watchdog can be overridden.
- // async queue SHRINK often precedes IAA. while it's ready
- // to go OFF neither can matter, and afterwards the IO
- // watchdog stops unless there's still periodic traffic.
- if (time_before_eq(t, ehci->watchdog.expires)
- && timer_pending (&ehci->watchdog))
- return;
- mod_timer (&ehci->watchdog, t);
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index c96db11..e534f9d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -261,6 +261,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 1b9abdb..f90fe0c 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -288,6 +288,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 06aadfb..5adaf36 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -135,6 +135,7 @@
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 33f1c1c..a8160d6 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1054,7 +1054,7 @@
#ifdef CONFIG_MFD_SM501
#include "ohci-sm501.c"
-#define PLATFORM_DRIVER ohci_hcd_sm501_driver
+#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
#endif
#if !defined(PCI_DRIVER) && \
@@ -1062,6 +1062,7 @@
!defined(OF_PLATFORM_DRIVER) && \
!defined(SA1111_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
!defined(SSB_OHCI_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
@@ -1121,9 +1122,18 @@
goto error_ssb;
#endif
+#ifdef SM501_OHCI_DRIVER
+ retval = platform_driver_register(&SM501_OHCI_DRIVER);
+ if (retval < 0)
+ goto error_sm501;
+#endif
+
return retval;
/* Error path */
+#ifdef SM501_OHCI_DRIVER
+ error_sm501:
+#endif
#ifdef SSB_OHCI_DRIVER
error_ssb:
#endif
@@ -1159,6 +1169,9 @@
static void __exit ohci_hcd_mod_exit(void)
{
+#ifdef SM501_OHCI_DRIVER
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
#ifdef SSB_OHCI_DRIVER
ssb_driver_unregister(&SSB_OHCI_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 79a7802..b567392 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,6 +36,18 @@
/*-------------------------------------------------------------------------*/
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ spin_lock_irq(&ohci->lock);
+ if (!ohci->autostop)
+ del_timer(&hcd->rh_timer); /* Prevent next poll */
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ spin_unlock_irq(&ohci->lock);
+}
+
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
@@ -362,28 +374,18 @@
int any_connected)
{
int poll_rh = 1;
- int rhsc;
- rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* If no status changes are pending, enable status-change
- * interrupts.
- */
- if (!rhsc && !changed) {
- rhsc = OHCI_INTR_RHSC;
- ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
- }
-
- /* Keep on polling until we know a device is connected
- * and RHSC is enabled, or until we autostop.
- */
+ /* keep on polling until we know a device is connected
+ * and RHSC is enabled */
if (!ohci->autostop) {
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (rhsc)
+ if (ohci_readl(ohci, &ohci->regs->intrenable) &
+ OHCI_INTR_RHSC)
poll_rh = 0;
} else {
ohci->autostop = 1;
@@ -396,13 +398,12 @@
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (rhsc && time_after_eq(jiffies,
+ } else if (time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
- poll_rh = 0;
}
}
break;
@@ -416,12 +417,6 @@
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
- if (!rhsc && (ohci->autostop ||
- ohci_to_hcd(ohci)->self.root_hub->
- do_remote_wakeup))
- ohci_writel(ohci, OHCI_INTR_RHSC,
- &ohci->regs->intrenable);
-
/* everything is idle, no need for polling */
poll_rh = 0;
}
@@ -443,16 +438,12 @@
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
- /* If RHSC is enabled, don't poll */
- if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
- return 0;
+ int poll_rh = 1;
- /* If no status changes are pending, enable status-change interrupts */
- if (!changed) {
- ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
- return 0;
- }
- return 1;
+ /* keep on polling until RHSC is enabled */
+ if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+ poll_rh = 0;
+ return poll_rh;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 96d14fa..13c12ed 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -193,6 +193,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 6859fb5..3a7c24c 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -466,6 +466,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 3bf175d..4696cc9 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -327,6 +327,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 664f07e..28b458f 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -280,6 +280,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 28467e2..605d59c 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -201,6 +201,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 50e55db..a672527 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -72,6 +72,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index cd3398b..523c301 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -172,6 +172,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index bfdeb0d..c1935ae 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -68,6 +68,7 @@
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
.start_port_reset = ohci_start_port_reset,
#if defined(CONFIG_PM)
.bus_suspend = ohci_bus_suspend,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 70b0d4b..d4ee27d 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -298,6 +298,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 9c9f3b5..9b54740 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -952,6 +952,7 @@
struct urb *urb;
urb_priv_t *urb_priv;
__hc32 savebits;
+ u32 tdINFO;
td = list_entry (entry, struct td, td_list);
urb = td->urb;
@@ -966,6 +967,17 @@
savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
*prev = td->hwNextTD | savebits;
+ /* If this was unlinked, the TD may not have been
+ * retired ... so manually save the data toggle.
+ * The controller ignores the value we save for
+ * control and ISO endpoints.
+ */
+ tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+ if ((tdINFO & TD_T) == TD_T_DATA0)
+ ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+ else if ((tdINFO & TD_T) == TD_T_DATA1)
+ ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
/* HC may have partly processed this TD */
td_done (ohci, urb, td);
urb_priv->td_cnt++;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index a73d2ff..ead4772 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -466,6 +466,7 @@
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 99438c6..0f48f2d 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -231,6 +231,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 60f03cc..e7ee607 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -68,6 +68,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index e899a77..e610698 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -75,6 +75,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index c4265ca..7275186 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -81,6 +81,7 @@
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index f293074..9b6323f 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2934,6 +2934,16 @@
return 0;
}
+static void u132_hub_irq_enable(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ } else if (u132->going > 0)
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+}
+
#ifdef CONFIG_PM
static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2985,6 +2995,7 @@
.bus_suspend = u132_bus_suspend,
.bus_resume = u132_bus_resume,
.start_port_reset = u132_start_port_reset,
+ .hub_irq_enable = u132_hub_irq_enable,
};
/*
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index cb7fa0e..33182f4 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3264,8 +3264,6 @@
/* decrement our usage count */
kref_put(&sisusb->kref, sisusb_delete);
-
- dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
}
static struct usb_device_id sisusb_table [] = {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5234e7a..0ff4a39 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -637,6 +637,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+ { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 06e0eca..8302eca 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -828,6 +828,9 @@
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ea924dc..d9fb376 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -570,7 +570,12 @@
.description = "PocketPC PDA",
.usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
- .num_ports = 2,
+ /*
+ * some devices have an extra endpoint, which
+ * must be ignored as it would make the core
+ * create a second port which oopses when used
+ */
+ .num_ports = 1,
.open = ipaq_open,
.close = ipaq_close,
.attach = ipaq_startup,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 43cfde8..a73420d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -306,6 +306,7 @@
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 103195a..2a0dd1b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -57,6 +57,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index cff160a..6ac3bbc 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -15,6 +15,7 @@
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define PL2303_PRODUCT_ID_MMX 0x0612
+#define PL2303_PRODUCT_ID_GPRS 0x0609
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 45fe366..39a7c11 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -402,11 +402,19 @@
US_FL_IGNORE_RESIDUE ),
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+/* CY7C68300 : support atacb */
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress ISD-300LP",
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+ 0),
#endif
/* Reported by Simon Levitt <simon@whattf.com>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 002b61b..e0c5f96 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1825,12 +1825,13 @@
config FB_W100
tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
+ depends on FB && ARCH_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+ It can also drive the w3220 chip found on iPAQ hx4700.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 0a27853..09d7e22 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -286,7 +286,7 @@
* rheap and make the furture large allocation fail.
*/
-void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
+static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
{
void *virt;
@@ -311,12 +311,12 @@
memset(virt, 0, size);
}
- pr_debug("rh virt=%p phys=%lx\n", virt, *phys);
+ pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys);
return virt;
}
-void fsl_diu_free(void *p, unsigned long size)
+static void fsl_diu_free(void *p, unsigned long size)
{
pr_debug("p=%p size=%lu\n", p, size);
@@ -770,7 +770,7 @@
info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
- if (info->screen_base == 0) {
+ if (info->screen_base == NULL) {
printk(KERN_ERR "Unable to allocate fb memory\n");
return -ENOMEM;
}
@@ -788,7 +788,7 @@
static void unmap_video_memory(struct fb_info *info)
{
fsl_diu_free(info->screen_base, info->fix.smem_len);
- info->screen_base = 0;
+ info->screen_base = NULL;
info->fix.smem_start = 0;
info->fix.smem_len = 0;
}
@@ -1158,7 +1158,7 @@
return 0;
}
-static int install_fb(struct fb_info *info)
+static int __devinit install_fb(struct fb_info *info)
{
int rc;
struct mfb_info *mfbi = info->par;
@@ -1233,7 +1233,7 @@
return 0;
}
-static void __exit uninstall_fb(struct fb_info *info)
+static void uninstall_fb(struct fb_info *info)
{
struct mfb_info *mfbi = info->par;
@@ -1287,7 +1287,7 @@
/* Read to clear the status */
status = in_be32(&hw->int_status);
- ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0);
+ ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
if (ret)
pr_info("Request diu IRQ failed.\n");
else {
@@ -1312,7 +1312,7 @@
/* Disable all LCDC interrupt */
out_be32(&hw->int_mask, 0x1f);
- free_irq(irq, 0);
+ free_irq(irq, NULL);
}
#ifdef CONFIG_PM
@@ -1353,7 +1353,8 @@
dma_addr_t paddr = 0;
ssize = size + bytes_align;
- buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO);
+ buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+ __GFP_ZERO);
if (!buf->vaddr)
return -ENOMEM;
@@ -1371,7 +1372,7 @@
static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
{
- dma_free_coherent(0, size + bytes_align,
+ dma_free_coherent(NULL, size + bytes_align,
buf->vaddr, (buf->paddr - buf->offset));
return;
}
@@ -1411,7 +1412,7 @@
return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
}
-static int fsl_diu_probe(struct of_device *ofdev,
+static int __devinit fsl_diu_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->node;
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 30469bf..d0674f1 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -1003,6 +1003,7 @@
static struct w100_pll_info xtal_16000000[] = {
/*freq M N_int N_fac tfgoal lock_time */
{ 72, 1, 8, 0, 0xe0, 48}, /* tfgoal guessed */
+ { 80, 1, 9, 0, 0xe0, 13}, /* tfgoal guessed */
{ 95, 1, 10, 7, 0xe0, 38}, /* tfgoal guessed */
{ 96, 1, 11, 0, 0xe0, 36}, /* tfgoal guessed */
{ 0, 0, 0, 0, 0, 0},
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index fd01d90..57997fa 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -51,4 +51,4 @@
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct p9_stat *stat);
void v9fs_dentry_release(struct dentry *);
-int v9fs_uflags2omode(int uflags);
+int v9fs_uflags2omode(int uflags, int extended);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 0d55aff..52944d2 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -59,7 +59,7 @@
P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p \n", inode, file);
v9ses = v9fs_inode2v9ses(inode);
- omode = v9fs_uflags2omode(file->f_flags);
+ omode = v9fs_uflags2omode(file->f_flags, v9fs_extended(v9ses));
fid = file->private_data;
if (!fid) {
fid = v9fs_fid_clone(file->f_path.dentry);
@@ -75,6 +75,8 @@
inode->i_size = 0;
inode->i_blocks = 0;
}
+ if ((file->f_flags & O_APPEND) && (!v9fs_extended(v9ses)))
+ generic_file_llseek(file, 0, SEEK_END);
}
file->private_data = fid;
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 40fa807..c95295c 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -132,10 +132,10 @@
/**
* v9fs_uflags2omode- convert posix open flags to plan 9 mode bits
* @uflags: flags to convert
- *
+ * @extended: if .u extensions are active
*/
-int v9fs_uflags2omode(int uflags)
+int v9fs_uflags2omode(int uflags, int extended)
{
int ret;
@@ -155,14 +155,16 @@
break;
}
- if (uflags & O_EXCL)
- ret |= P9_OEXCL;
-
if (uflags & O_TRUNC)
ret |= P9_OTRUNC;
- if (uflags & O_APPEND)
- ret |= P9_OAPPEND;
+ if (extended) {
+ if (uflags & O_EXCL)
+ ret |= P9_OEXCL;
+
+ if (uflags & O_APPEND)
+ ret |= P9_OAPPEND;
+ }
return ret;
}
@@ -506,7 +508,7 @@
flags = O_RDWR;
fid = v9fs_create(v9ses, dir, dentry, NULL, perm,
- v9fs_uflags2omode(flags));
+ v9fs_uflags2omode(flags, v9fs_extended(v9ses)));
if (IS_ERR(fid)) {
err = PTR_ERR(fid);
fid = NULL;
diff --git a/fs/Kconfig b/fs/Kconfig
index cf12c40..2694648 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -830,7 +830,7 @@
from the project web site.
For more information see <file:Documentation/filesystems/ntfs.txt>
- and <http://linux-ntfs.sourceforge.net/>.
+ and <http://www.linux-ntfs.org/>.
To compile this file system support as a module, choose M here: the
module will be called ntfs.
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 50c994a..09a4522 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -575,13 +575,11 @@
int rc;
atomic_set(&ecryptfs_num_miscdev_opens, 0);
- mutex_lock(&ecryptfs_daemon_hash_mux);
rc = misc_register(&ecryptfs_miscdev);
if (rc)
printk(KERN_ERR "%s: Failed to register miscellaneous device "
"for communications with userspace daemons; rc = [%d]\n",
__func__, rc);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
return rc;
}
diff --git a/fs/exec.c b/fs/exec.c
index da94a6f..fd92343 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -610,7 +610,7 @@
bprm->exec -= stack_shift;
down_write(&mm->mmap_sem);
- vm_flags = vma->vm_flags;
+ vm_flags = VM_STACK_FLAGS;
/*
* Adjust stack execute permissions; explicitly enable for
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index fe3119a..2845425 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2875,8 +2875,10 @@
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite) {
i_size_write(inode, off+len-towrite);
EXT3_I(inode)->i_disksize = inode->i_size;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index cb96f127c..02bf243 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3337,8 +3337,10 @@
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite) {
i_size_write(inode, off+len-towrite);
EXT4_I(inode)->i_disksize = inode->i_size;
diff --git a/fs/libfs.c b/fs/libfs.c
index 892d41c..baeb71e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -512,6 +512,20 @@
mntput(mnt);
}
+/**
+ * simple_read_from_buffer - copy data from the buffer to user space
+ * @to: the user space buffer to read to
+ * @count: the maximum number of bytes to read
+ * @ppos: the current position in the buffer
+ * @from: the buffer to read from
+ * @available: the size of the buffer
+ *
+ * The simple_read_from_buffer() function reads up to @count bytes from the
+ * buffer @from at offset @ppos into the user space address starting at @to.
+ *
+ * On success, the number of bytes read is returned and the offset @ppos is
+ * advanced by this number, or negative value is returned on error.
+ **/
ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos,
const void *from, size_t available)
{
@@ -528,6 +542,20 @@
return count;
}
+/**
+ * memory_read_from_buffer - copy data from the buffer
+ * @to: the kernel space buffer to read to
+ * @count: the maximum number of bytes to read
+ * @ppos: the current position in the buffer
+ * @from: the buffer to read from
+ * @available: the size of the buffer
+ *
+ * The memory_read_from_buffer() function reads up to @count bytes from the
+ * buffer @from at offset @ppos into the kernel space address starting at @to.
+ *
+ * On success, the number of bytes read is returned and the offset @ppos is
+ * advanced by this number, or negative value is returned on error.
+ **/
ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
const void *from, size_t available)
{
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 58d43da..982a206 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -204,7 +204,7 @@
* Note: assumes we have exclusive access to this mapping either
* through inode->i_mutex or some other mechanism.
*/
- if (page->index == 0 && invalidate_inode_pages2_range(inode->i_mapping, PAGE_CACHE_SIZE, -1) < 0) {
+ if (invalidate_inode_pages2_range(inode->i_mapping, page->index + 1, -1) < 0) {
/* Should never happen */
nfs_zap_mapping(inode, inode->i_mapping);
}
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index efc015c..44f87ca 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -606,7 +606,9 @@
res->last_used = 0;
+ spin_lock(&dlm->spinlock);
list_add_tail(&res->tracking, &dlm->tracking_list);
+ spin_unlock(&dlm->spinlock);
memset(res->lvb, 0, DLM_LVB_LEN);
memset(res->refmap, 0, sizeof(res->refmap));
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 394d25a..80e20d9 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1554,8 +1554,8 @@
*/
int ocfs2_file_lock(struct file *file, int ex, int trylock)
{
- int ret, level = ex ? LKM_EXMODE : LKM_PRMODE;
- unsigned int lkm_flags = trylock ? LKM_NOQUEUE : 0;
+ int ret, level = ex ? DLM_LOCK_EX : DLM_LOCK_PR;
+ unsigned int lkm_flags = trylock ? DLM_LKF_NOQUEUE : 0;
unsigned long flags;
struct ocfs2_file_private *fp = file->private_data;
struct ocfs2_lock_res *lockres = &fp->fp_flock;
@@ -1582,7 +1582,7 @@
* Get the lock at NLMODE to start - that way we
* can cancel the upconvert request if need be.
*/
- ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0);
+ ret = ocfs2_lock_create(osb, lockres, DLM_LOCK_NL, 0);
if (ret < 0) {
mlog_errno(ret);
goto out;
@@ -1597,7 +1597,7 @@
}
lockres->l_action = OCFS2_AST_CONVERT;
- lkm_flags |= LKM_CONVERT;
+ lkm_flags |= DLM_LKF_CONVERT;
lockres->l_requested = level;
lockres_or_flags(lockres, OCFS2_LOCK_BUSY);
@@ -1664,7 +1664,7 @@
if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED))
return;
- if (lockres->l_level == LKM_NLMODE)
+ if (lockres->l_level == DLM_LOCK_NL)
return;
mlog(0, "Unlock: \"%s\" flags: 0x%lx, level: %d, act: %d\n",
@@ -1678,11 +1678,11 @@
lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
lockres->l_blocking = DLM_LOCK_EX;
- gen = ocfs2_prepare_downconvert(lockres, LKM_NLMODE);
+ gen = ocfs2_prepare_downconvert(lockres, DLM_LOCK_NL);
lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0);
spin_unlock_irqrestore(&lockres->l_lock, flags);
- ret = ocfs2_downconvert_lock(osb, lockres, LKM_NLMODE, 0, gen);
+ ret = ocfs2_downconvert_lock(osb, lockres, DLM_LOCK_NL, 0, gen);
if (ret) {
mlog_errno(ret);
return;
diff --git a/fs/open.c b/fs/open.c
index a145008..a99ad09 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -16,6 +16,7 @@
#include <linux/namei.h>
#include <linux/backing-dev.h>
#include <linux/capability.h>
+#include <linux/securebits.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/vfs.h>
@@ -425,7 +426,7 @@
{
struct nameidata nd;
int old_fsuid, old_fsgid;
- kernel_cap_t old_cap;
+ kernel_cap_t uninitialized_var(old_cap); /* !SECURE_NO_SETUID_FIXUP */
int res;
if (mode & ~S_IRWXO) /* where's F_OK, X_OK, W_OK, R_OK? */
@@ -433,23 +434,27 @@
old_fsuid = current->fsuid;
old_fsgid = current->fsgid;
- old_cap = current->cap_effective;
current->fsuid = current->uid;
current->fsgid = current->gid;
- /*
- * Clear the capabilities if we switch to a non-root user
- *
- * FIXME: There is a race here against sys_capset. The
- * capabilities can change yet we will restore the old
- * value below. We should hold task_capabilities_lock,
- * but we cannot because user_path_walk can sleep.
- */
- if (current->uid)
- cap_clear(current->cap_effective);
- else
- current->cap_effective = current->cap_permitted;
+ if (!issecure(SECURE_NO_SETUID_FIXUP)) {
+ /*
+ * Clear the capabilities if we switch to a non-root user
+ */
+#ifndef CONFIG_SECURITY_FILE_CAPABILITIES
+ /*
+ * FIXME: There is a race here against sys_capset. The
+ * capabilities can change yet we will restore the old
+ * value below. We should hold task_capabilities_lock,
+ * but we cannot because user_path_walk can sleep.
+ */
+#endif /* ndef CONFIG_SECURITY_FILE_CAPABILITIES */
+ if (current->uid)
+ old_cap = cap_set_effective(__cap_empty_set);
+ else
+ old_cap = cap_set_effective(current->cap_permitted);
+ }
res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW|LOOKUP_ACCESS, &nd);
if (res)
@@ -478,7 +483,9 @@
out:
current->fsuid = old_fsuid;
current->fsgid = old_fsgid;
- current->cap_effective = old_cap;
+
+ if (!issecure(SECURE_NO_SETUID_FIXUP))
+ cap_set_effective(old_cap);
return res;
}
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index ab8ccc9..c492449 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -476,10 +476,10 @@
return -ESRCH;
mm = get_task_mm(task);
if (mm) {
- static struct mm_walk clear_refs_walk;
- memset(&clear_refs_walk, 0, sizeof(clear_refs_walk));
- clear_refs_walk.pmd_entry = clear_refs_pte_range;
- clear_refs_walk.mm = mm;
+ struct mm_walk clear_refs_walk = {
+ .pmd_entry = clear_refs_pte_range,
+ .mm = mm,
+ };
down_read(&mm->mmap_sem);
for (vma = mm->mmap; vma; vma = vma->vm_next) {
clear_refs_walk.private = vma;
@@ -602,11 +602,6 @@
return err;
}
-static struct mm_walk pagemap_walk = {
- .pmd_entry = pagemap_pte_range,
- .pte_hole = pagemap_pte_hole
-};
-
/*
* /proc/pid/pagemap - an array mapping virtual pages to pfns
*
@@ -641,6 +636,11 @@
struct pagemapread pm;
int pagecount;
int ret = -ESRCH;
+ struct mm_walk pagemap_walk;
+ unsigned long src;
+ unsigned long svpfn;
+ unsigned long start_vaddr;
+ unsigned long end_vaddr;
if (!task)
goto out;
@@ -659,11 +659,15 @@
if (!mm)
goto out_task;
- ret = -ENOMEM;
+
uaddr = (unsigned long)buf & PAGE_MASK;
uend = (unsigned long)(buf + count);
pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE;
- pages = kmalloc(pagecount * sizeof(struct page *), GFP_KERNEL);
+ ret = 0;
+ if (pagecount == 0)
+ goto out_mm;
+ pages = kcalloc(pagecount, sizeof(struct page *), GFP_KERNEL);
+ ret = -ENOMEM;
if (!pages)
goto out_mm;
@@ -684,33 +688,33 @@
pm.out = (u64 *)buf;
pm.end = (u64 *)(buf + count);
- if (!ptrace_may_attach(task)) {
- ret = -EIO;
- } else {
- unsigned long src = *ppos;
- unsigned long svpfn = src / PM_ENTRY_BYTES;
- unsigned long start_vaddr = svpfn << PAGE_SHIFT;
- unsigned long end_vaddr = TASK_SIZE_OF(task);
+ pagemap_walk.pmd_entry = pagemap_pte_range;
+ pagemap_walk.pte_hole = pagemap_pte_hole;
+ pagemap_walk.mm = mm;
+ pagemap_walk.private = ±
- /* watch out for wraparound */
- if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT)
- start_vaddr = end_vaddr;
+ src = *ppos;
+ svpfn = src / PM_ENTRY_BYTES;
+ start_vaddr = svpfn << PAGE_SHIFT;
+ end_vaddr = TASK_SIZE_OF(task);
- /*
- * The odds are that this will stop walking way
- * before end_vaddr, because the length of the
- * user buffer is tracked in "pm", and the walk
- * will stop when we hit the end of the buffer.
- */
- ret = walk_page_range(start_vaddr, end_vaddr,
- &pagemap_walk);
- if (ret == PM_END_OF_BUFFER)
- ret = 0;
- /* don't need mmap_sem for these, but this looks cleaner */
- *ppos += (char *)pm.out - buf;
- if (!ret)
- ret = (char *)pm.out - buf;
- }
+ /* watch out for wraparound */
+ if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT)
+ start_vaddr = end_vaddr;
+
+ /*
+ * The odds are that this will stop walking way
+ * before end_vaddr, because the length of the
+ * user buffer is tracked in "pm", and the walk
+ * will stop when we hit the end of the buffer.
+ */
+ ret = walk_page_range(start_vaddr, end_vaddr, &pagemap_walk);
+ if (ret == PM_END_OF_BUFFER)
+ ret = 0;
+ /* don't need mmap_sem for these, but this looks cleaner */
+ *ppos += (char *)pm.out - buf;
+ if (!ret)
+ ret = (char *)pm.out - buf;
out_pages:
for (; pagecount; pagecount--) {
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 5791793..1922696 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -45,6 +45,8 @@
goto out;
reiserfs_update_inode_transaction(inode);
+ reiserfs_discard_prealloc(&th, inode);
+
err = reiserfs_delete_object(&th, inode);
/* Do quota update inside a transaction for journaled quotas. We must do that
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index ed424d7..1d40f2b 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2165,8 +2165,10 @@
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off + len - towrite)
i_size_write(inode, off + len - towrite);
inode->i_version++;
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 85fd0aa..4ec0a29 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -2,7 +2,7 @@
#define _ASM_GENERIC_ATOMIC_H
/*
* Copyright (C) 2005 Silicon Graphics, Inc.
- * Christoph Lameter <clameter@sgi.com>
+ * Christoph Lameter
*
* Allows to provide arch independent atomic definitions without the need to
* edit all arch specific atomic.h files.
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index a798d62..1232be3 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -283,10 +283,10 @@
" beqz %0, 2f \n"
" subu %0, %1, %3 \n"
" .set reorder \n"
- "1: \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
+ "1: \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
@@ -664,10 +664,10 @@
" beqz %0, 2f \n"
" dsubu %0, %1, %3 \n"
" .set reorder \n"
- "1: \n"
" .subsection 2 \n"
"2: b 1b \n"
" .previous \n"
+ "1: \n"
" .set mips0 \n"
: "=&r" (result), "=&r" (temp), "=m" (v->counter)
: "Ir" (i), "m" (v->counter)
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index 649c6c3..be32ff0 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -49,12 +49,6 @@
return pte_wrprotect(pte);
}
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- ptep_set_wrprotect(mm, addr, ptep);
-}
-
static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index cc6a43b..7686569 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -314,6 +314,16 @@
old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+
+ if ((pte_val(*ptep) & _PAGE_RW) == 0)
+ return;
+ old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+}
+
/*
* We currently remove entries from the hashtable regardless of whether
* the entry was young or dirty. The generic routines only flush if the
diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h
index c7f4f8e..bd0ea19 100644
--- a/include/asm-s390/pgtable.h
+++ b/include/asm-s390/pgtable.h
@@ -223,6 +223,9 @@
#define _PAGE_SPECIAL 0x004 /* SW associated with special page */
#define __HAVE_ARCH_PTE_SPECIAL
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL)
+
/* Six different types of pages. */
#define _PAGE_TYPE_EMPTY 0x400
#define _PAGE_TYPE_NONE 0x401
@@ -681,7 +684,7 @@
*/
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- pte_val(pte) &= PAGE_MASK;
+ pte_val(pte) &= _PAGE_CHG_MASK;
pte_val(pte) |= pgprot_val(newprot);
return pte;
}
diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h
index bfd9900..76f3921 100644
--- a/include/asm-x86/kvm_para.h
+++ b/include/asm-x86/kvm_para.h
@@ -71,7 +71,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr));
+ : "a"(nr)
+ : "memory");
return ret;
}
@@ -80,7 +81,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1));
+ : "a"(nr), "b"(p1)
+ : "memory");
return ret;
}
@@ -90,7 +92,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2));
+ : "a"(nr), "b"(p1), "c"(p2)
+ : "memory");
return ret;
}
@@ -100,7 +103,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2), "d"(p3));
+ : "a"(nr), "b"(p1), "c"(p2), "d"(p3)
+ : "memory");
return ret;
}
@@ -111,7 +115,8 @@
long ret;
asm volatile(KVM_HYPERCALL
: "=a"(ret)
- : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4));
+ : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)
+ : "memory");
return ret;
}
diff --git a/include/linux/capability.h b/include/linux/capability.h
index fa830f8..0267384 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -501,6 +501,8 @@
extern const kernel_cap_t __cap_full_set;
extern const kernel_cap_t __cap_init_eff_set;
+kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
+
int capable(int cap);
int __capable(struct task_struct *t, int cap);
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
index 1605dd8..6f9f19d 100644
--- a/include/linux/cfag12864b.h
+++ b/include/linux/cfag12864b.h
@@ -4,7 +4,7 @@
* Description: cfag12864b LCD driver header
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-12
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 5df3db5..c24875b 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -353,6 +353,10 @@
for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
#endif /* NR_CPUS */
+#define next_cpu_nr(n, src) next_cpu(n, src)
+#define cpus_weight_nr(cpumask) cpus_weight(cpumask)
+#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
+
/*
* The following particular system cpumasks and operations manage
* possible, present and online cpus. Each of them is a fixed size
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index f4a5871..4aaa4af 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -1,6 +1,8 @@
#ifndef __LINUX_DEBUG_LOCKING_H
#define __LINUX_DEBUG_LOCKING_H
+#include <linux/kernel.h>
+
struct task_struct;
extern int debug_locks;
@@ -11,14 +13,6 @@
*/
extern int debug_locks_off(void);
-/*
- * In the debug case we carry the caller's instruction pointer into
- * other functions, but we dont want the function argument overhead
- * in the nondebug case - hence these macros:
- */
-#define _RET_IP_ (unsigned long)__builtin_return_address(0)
-#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
-
#define DEBUG_LOCKS_WARN_ON(c) \
({ \
int __ret = 0; \
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 4d10c73..6c7eff2 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -13,7 +13,7 @@
struct device;
-#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
int request_firmware(const struct firmware **fw, const char *name,
struct device *device);
int request_firmware_nowait(
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 9918772..eddb6da 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -189,6 +189,21 @@
hw->io_ports.ctl_addr = ctl_addr;
}
+/* for IDE PCI controllers in legacy mode, temporary */
+static inline int __ide_default_irq(unsigned long base)
+{
+ switch (base) {
+#ifdef CONFIG_IA64
+ case 0x1f0: return isa_irq_to_vector(14);
+ case 0x170: return isa_irq_to_vector(15);
+#else
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+#endif
+ }
+ return 0;
+}
+
#include <asm/ide.h>
#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 792bf0a..2e70006 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -46,6 +46,9 @@
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+#define _RET_IP_ (unsigned long)__builtin_return_address(0)
+#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
+
#ifdef CONFIG_LBD
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h
index a2c54ac..cb31179 100644
--- a/include/linux/ks0108.h
+++ b/include/linux/ks0108.h
@@ -4,7 +4,7 @@
* Description: ks0108 LCD Controller driver header
* License: GPLv2
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index eafc9d6..6595382 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1520,6 +1520,7 @@
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
+#define PCI_DEVICE_ID_MARVELL_CAFE_SD 0x4101
#define PCI_VENDOR_ID_V3 0x11b0
#define PCI_DEVICE_ID_V3_V960 0x0001
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
new file mode 100644
index 0000000..bde4586
--- /dev/null
+++ b/include/linux/rculist.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_RCULIST_H
+#define _LINUX_RCULIST_H
+
+#include <linux/list.h>
+
+#endif /* _LINUX_RCULIST_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index c1f19db..92f09bd 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -7,14 +7,15 @@
inheritance of root-permissions and suid-root executable under
compatibility mode. We raise the effective and inheritable bitmasks
*of the executable file* if the effective uid of the new process is
- 0. If the real uid is 0, we raise the inheritable bitmask of the
+ 0. If the real uid is 0, we raise the effective (legacy) bit of the
executable file. */
#define SECURE_NOROOT 0
#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
-/* When set, setuid to/from uid 0 does not trigger capability-"fixes"
- to be compatible with old programs relying on set*uid to loose
- privileges. When unset, setuid doesn't change privileges. */
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+ When unset, to provide compatiblility with old programs relying on
+ set*uid to gain/lose privilege, transitions to/from uid 0 cause
+ capabilities to be gained/lost. */
#define SECURE_NO_SETUID_FIXUP 2
#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
@@ -26,10 +27,10 @@
#define SECURE_KEEP_CAPS 4
#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
-/* Each securesetting is implemented using two bits. One bit specify
+/* Each securesetting is implemented using two bits. One bit specifies
whether the setting is on or off. The other bit specify whether the
- setting is fixed or not. A setting which is fixed cannot be changed
- from user-level. */
+ setting is locked or not. A setting which is locked cannot be
+ changed from user-level. */
#define issecure_mask(X) (1 << (X))
#define issecure(X) (issecure_mask(X) & current->securebits)
diff --git a/include/linux/slab.h b/include/linux/slab.h
index c2ad350..9aa90a6 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -1,7 +1,7 @@
/*
* Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
*
- * (C) SGI 2006, Christoph Lameter <clameter@sgi.com>
+ * (C) SGI 2006, Christoph Lameter
* Cleaned up and restructured to ease the addition of alternative
* implementations of SLAB allocators.
*/
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 71e43a1..d117ea2 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -4,7 +4,7 @@
/*
* SLUB : A Slab allocator without object queues.
*
- * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 SGI, Christoph Lameter
*/
#include <linux/types.h>
#include <linux/gfp.h>
@@ -137,10 +137,12 @@
if (size <= KMALLOC_MIN_SIZE)
return KMALLOC_SHIFT_LOW;
+#if KMALLOC_MIN_SIZE <= 64
if (size > 64 && size <= 96)
return 1;
if (size > 128 && size <= 192)
return 2;
+#endif
if (size <= 8) return 3;
if (size <= 16) return 4;
if (size <= 32) return 5;
diff --git a/kernel/capability.c b/kernel/capability.c
index cfbe442..901e0fd 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -121,6 +121,27 @@
* uninteresting and/or not to be changed.
*/
+/*
+ * Atomically modify the effective capabilities returning the original
+ * value. No permission check is performed here - it is assumed that the
+ * caller is permitted to set the desired effective capabilities.
+ */
+kernel_cap_t cap_set_effective(const kernel_cap_t pE_new)
+{
+ kernel_cap_t pE_old;
+
+ spin_lock(&task_capability_lock);
+
+ pE_old = current->cap_effective;
+ current->cap_effective = pE_new;
+
+ spin_unlock(&task_capability_lock);
+
+ return pE_old;
+}
+
+EXPORT_SYMBOL(cap_set_effective);
+
/**
* sys_capget - get the capabilities of a given process.
* @header: pointer to struct that contains capability version and
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 421be5f..ab80515 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1003,10 +1003,18 @@
*/
raise = timer->state == HRTIMER_STATE_PENDING;
+ /*
+ * We use preempt_disable to prevent this task from migrating after
+ * setting up the softirq and raising it. Otherwise, if me migrate
+ * we will raise the softirq on the wrong CPU.
+ */
+ preempt_disable();
+
unlock_hrtimer_base(timer, &flags);
if (raise)
hrtimer_raise_softirq();
+ preempt_enable();
return ret;
}
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index d4998f8..1485ca8 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -79,7 +79,7 @@
*
* For such cases, we now have a blacklist
*/
-struct kprobe_blackpoint kprobe_blacklist[] = {
+static struct kprobe_blackpoint kprobe_blacklist[] = {
{"preempt_schedule",},
{NULL} /* Terminator */
};
diff --git a/kernel/printk.c b/kernel/printk.c
index 8fb01c3..e2129e8 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -666,7 +666,7 @@
return retval;
}
-const char printk_recursion_bug_msg [] =
+static const char printk_recursion_bug_msg [] =
KERN_CRIT "BUG: recent printk recursion!\n";
static int printk_recursion_bug;
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index 5e02b77..41d275a 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -925,7 +925,15 @@
spin_unlock_irqrestore(&rdp->lock, flags);
}
-void __devinit rcu_online_cpu(int cpu)
+#else /* #ifdef CONFIG_HOTPLUG_CPU */
+
+void rcu_offline_cpu(int cpu)
+{
+}
+
+#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
+
+void __cpuinit rcu_online_cpu(int cpu)
{
unsigned long flags;
@@ -934,18 +942,6 @@
spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags);
}
-#else /* #ifdef CONFIG_HOTPLUG_CPU */
-
-void rcu_offline_cpu(int cpu)
-{
-}
-
-void __devinit rcu_online_cpu(int cpu)
-{
-}
-
-#endif /* #else #ifdef CONFIG_HOTPLUG_CPU */
-
static void rcu_process_callbacks(struct softirq_action *unused)
{
unsigned long flags;
diff --git a/kernel/sched.c b/kernel/sched.c
index 94ead43..4e2f6033 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5622,10 +5622,10 @@
double_rq_lock(rq_src, rq_dest);
/* Already moved. */
if (task_cpu(p) != src_cpu)
- goto out;
+ goto done;
/* Affinity changed (again). */
if (!cpu_isset(dest_cpu, p->cpus_allowed))
- goto out;
+ goto fail;
on_rq = p->se.on_rq;
if (on_rq)
@@ -5636,8 +5636,9 @@
activate_task(rq_dest, p, 0);
check_preempt_curr(rq_dest, p);
}
+done:
ret = 1;
-out:
+fail:
double_rq_unlock(rq_src, rq_dest);
return ret;
}
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index c828c23..a272d78 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -120,6 +120,7 @@
printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %lus! [%s:%d]\n",
this_cpu, now - touch_timestamp,
current->comm, task_pid_nr(current));
+ print_modules();
if (regs)
show_regs(regs);
else
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 29fc39f..ce77995 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -13,7 +13,7 @@
* Kai Petzke <wpp@marie.physik.tu-berlin.de>
* Theodore Ts'o <tytso@mit.edu>
*
- * Made to use alloc_percpu by Christoph Lameter <clameter@sgi.com>.
+ * Made to use alloc_percpu by Christoph Lameter.
*/
#include <linux/module.h>
diff --git a/lib/bug.c b/lib/bug.c
index 530f38f..bfeafd6 100644
--- a/lib/bug.c
+++ b/lib/bug.c
@@ -37,6 +37,7 @@
*/
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/sched.h>
@@ -149,6 +150,7 @@
(void *)bugaddr);
show_regs(regs);
+ add_taint(TAINT_WARN);
return BUG_TRAP_TYPE_WARN;
}
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 169a2f8..56ec21a 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2001 Momchil Velikov
* Portions Copyright (C) 2001 Christoph Hellwig
- * Copyright (C) 2005 SGI, Christoph Lameter <clameter@sgi.com>
+ * Copyright (C) 2005 SGI, Christoph Lameter
* Copyright (C) 2006 Nick Piggin
*
* This program is free software; you can redistribute it and/or
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 6021757..1dc2d1d 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -22,6 +22,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
+#include <linux/kallsyms.h>
+#include <linux/uaccess.h>
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
@@ -482,6 +484,89 @@
return buf;
}
+static char *string(char *buf, char *end, char *s, int field_width, int precision, int flags)
+{
+ int len, i;
+
+ if ((unsigned long)s < PAGE_SIZE)
+ s = "<NULL>";
+
+ len = strnlen(s, precision);
+
+ if (!(flags & LEFT)) {
+ while (len < field_width--) {
+ if (buf < end)
+ *buf = ' ';
+ ++buf;
+ }
+ }
+ for (i = 0; i < len; ++i) {
+ if (buf < end)
+ *buf = *s;
+ ++buf; ++s;
+ }
+ while (len < field_width--) {
+ if (buf < end)
+ *buf = ' ';
+ ++buf;
+ }
+ return buf;
+}
+
+static inline void *dereference_function_descriptor(void *ptr)
+{
+#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
+ void *p;
+ if (!probe_kernel_address(ptr, p))
+ ptr = p;
+#endif
+ return ptr;
+}
+
+static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
+{
+ unsigned long value = (unsigned long) ptr;
+#ifdef CONFIG_KALLSYMS
+ char sym[KSYM_SYMBOL_LEN];
+ sprint_symbol(sym, value);
+ return string(buf, end, sym, field_width, precision, flags);
+#else
+ field_width = 2*sizeof(void *);
+ flags |= SPECIAL | SMALL | ZEROPAD;
+ return number(buf, end, value, 16, field_width, precision, flags);
+#endif
+}
+
+/*
+ * Show a '%p' thing. A kernel extension is that the '%p' is followed
+ * by an extra set of alphanumeric characters that are extended format
+ * specifiers.
+ *
+ * Right now we just handle 'F' (for symbolic Function descriptor pointers)
+ * and 'S' (for Symbolic direct pointers), but this can easily be
+ * extended in the future (network address types etc).
+ *
+ * The difference between 'S' and 'F' is that on ia64 and ppc64 function
+ * pointers are really function descriptors, which contain a pointer the
+ * real address.
+ */
+static char *pointer(const char *fmt, char *buf, char *end, void *ptr, int field_width, int precision, int flags)
+{
+ switch (*fmt) {
+ case 'F':
+ ptr = dereference_function_descriptor(ptr);
+ /* Fallthrough */
+ case 'S':
+ return symbol_string(buf, end, ptr, field_width, precision, flags);
+ }
+ flags |= SMALL;
+ if (field_width == -1) {
+ field_width = 2*sizeof(void *);
+ flags |= ZEROPAD;
+ }
+ return number(buf, end, (unsigned long) ptr, 16, field_width, precision, flags);
+}
+
/**
* vsnprintf - Format a string and place it in a buffer
* @buf: The buffer to place the result into
@@ -502,11 +587,9 @@
*/
int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
{
- int len;
unsigned long long num;
- int i, base;
+ int base;
char *str, *end, c;
- const char *s;
int flags; /* flags to number() */
@@ -622,43 +705,18 @@
continue;
case 's':
- s = va_arg(args, char *);
- if ((unsigned long)s < PAGE_SIZE)
- s = "<NULL>";
-
- len = strnlen(s, precision);
-
- if (!(flags & LEFT)) {
- while (len < field_width--) {
- if (str < end)
- *str = ' ';
- ++str;
- }
- }
- for (i = 0; i < len; ++i) {
- if (str < end)
- *str = *s;
- ++str; ++s;
- }
- while (len < field_width--) {
- if (str < end)
- *str = ' ';
- ++str;
- }
+ str = string(str, end, va_arg(args, char *), field_width, precision, flags);
continue;
case 'p':
- flags |= SMALL;
- if (field_width == -1) {
- field_width = 2*sizeof(void *);
- flags |= ZEROPAD;
- }
- str = number(str, end,
- (unsigned long) va_arg(args, void *),
- 16, field_width, precision, flags);
+ str = pointer(fmt+1, str, end,
+ va_arg(args, void *),
+ field_width, precision, flags);
+ /* Skip all alphanumeric pointer suffixes */
+ while (isalnum(fmt[1]))
+ fmt++;
continue;
-
case 'n':
/* FIXME:
* What does C99 say about the overflow case here? */
diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c
index f4026ba..05f2b40 100644
--- a/mm/allocpercpu.c
+++ b/mm/allocpercpu.c
@@ -1,7 +1,7 @@
/*
* linux/mm/allocpercpu.c
*
- * Separated from slab.c August 11, 2006 Christoph Lameter <clameter@sgi.com>
+ * Separated from slab.c August 11, 2006 Christoph Lameter
*/
#include <linux/mm.h>
#include <linux/module.h>
diff --git a/mm/memory.c b/mm/memory.c
index d14b251..2302d22 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1151,7 +1151,7 @@
* be processed until returning to user space.
*/
if (unlikely(test_tsk_thread_flag(tsk, TIF_MEMDIE)))
- return -ENOMEM;
+ return i ? i : -ENOMEM;
if (write)
foll_flags |= FOLL_WRITE;
@@ -1697,8 +1697,19 @@
struct page *dirty_page = NULL;
old_page = vm_normal_page(vma, address, orig_pte);
- if (!old_page)
+ if (!old_page) {
+ /*
+ * VM_MIXEDMAP !pfn_valid() case
+ *
+ * We should not cow pages in a shared writeable mapping.
+ * Just mark the pages writable as we can't do any dirty
+ * accounting on raw pfn maps.
+ */
+ if ((vma->vm_flags & (VM_WRITE|VM_SHARED)) ==
+ (VM_WRITE|VM_SHARED))
+ goto reuse;
goto gotten;
+ }
/*
* Take out anonymous pages first, anonymous shared vmas are
@@ -1751,6 +1762,7 @@
}
if (reuse) {
+reuse:
flush_cache_page(vma, address, pte_pfn(orig_pte));
entry = pte_mkyoung(orig_pte);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index a37a503..c94e58b 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -729,7 +729,11 @@
} else {
*policy = pol == &default_policy ? MPOL_DEFAULT :
pol->mode;
- *policy |= pol->flags;
+ /*
+ * Internal mempolicy flags must be masked off before exposing
+ * the policy to userspace.
+ */
+ *policy |= (pol->flags & MPOL_MODE_FLAGS);
}
if (vma) {
diff --git a/mm/migrate.c b/mm/migrate.c
index 112bcae..55bd355 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -9,7 +9,7 @@
* IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
* Hirokazu Takahashi <taka@valinux.co.jp>
* Dave Hansen <haveblue@us.ibm.com>
- * Christoph Lameter <clameter@sgi.com>
+ * Christoph Lameter
*/
#include <linux/migrate.h>
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2f55295..f32fae3 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2328,7 +2328,6 @@
static void build_zonelist_cache(pg_data_t *pgdat)
{
pgdat->node_zonelists[0].zlcache_ptr = NULL;
- pgdat->node_zonelists[1].zlcache_ptr = NULL;
}
#endif /* CONFIG_NUMA */
diff --git a/mm/slub.c b/mm/slub.c
index 0987d1c..315c392 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5,7 +5,7 @@
* The allocator synchronizes using per slab locks and only
* uses a centralized lock to manage a pool of partial slabs.
*
- * (C) 2007 SGI, Christoph Lameter <clameter@sgi.com>
+ * (C) 2007 SGI, Christoph Lameter
*/
#include <linux/mm.h>
@@ -1628,9 +1628,11 @@
void **object;
struct kmem_cache_cpu *c;
unsigned long flags;
+ unsigned int objsize;
local_irq_save(flags);
c = get_cpu_slab(s, smp_processor_id());
+ objsize = c->objsize;
if (unlikely(!c->freelist || !node_match(c, node)))
object = __slab_alloc(s, gfpflags, node, addr, c);
@@ -1643,7 +1645,7 @@
local_irq_restore(flags);
if (unlikely((gfpflags & __GFP_ZERO) && object))
- memset(object, 0, c->objsize);
+ memset(object, 0, objsize);
return object;
}
@@ -2995,8 +2997,6 @@
create_kmalloc_cache(&kmalloc_caches[1],
"kmalloc-96", 96, GFP_KERNEL);
caches++;
- }
- if (KMALLOC_MIN_SIZE <= 128) {
create_kmalloc_cache(&kmalloc_caches[2],
"kmalloc-192", 192, GFP_KERNEL);
caches++;
@@ -3026,6 +3026,16 @@
for (i = 8; i < KMALLOC_MIN_SIZE; i += 8)
size_index[(i - 1) / 8] = KMALLOC_SHIFT_LOW;
+ if (KMALLOC_MIN_SIZE == 128) {
+ /*
+ * The 192 byte sized cache is not used if the alignment
+ * is 128 byte. Redirect kmalloc to use the 256 byte cache
+ * instead.
+ */
+ for (i = 128 + 8; i <= 192; i += 8)
+ size_index[(i - 1) / 8] = 8;
+ }
+
slab_state = UP;
/* Provide the correct kmalloc names now that the caches are up */
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index 99c4f36..a91b5f8 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -1,7 +1,7 @@
/*
* Virtual Memory Map support
*
- * (C) 2007 sgi. Christoph Lameter <clameter@sgi.com>.
+ * (C) 2007 sgi. Christoph Lameter.
*
* Virtual memory maps allow VM primitives pfn_to_page, page_to_pfn,
* virt_to_page, page_address() to be implemented as a base offset
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 5905d56..81ae3d6 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1144,20 +1144,20 @@
case RPC_GSS_SVC_NONE:
break;
case RPC_GSS_SVC_INTEGRITY:
+ /* placeholders for length and seq. number: */
+ svc_putnl(resv, 0);
+ svc_putnl(resv, 0);
if (unwrap_integ_data(&rqstp->rq_arg,
gc->gc_seq, rsci->mechctx))
goto garbage_args;
+ break;
+ case RPC_GSS_SVC_PRIVACY:
/* placeholders for length and seq. number: */
svc_putnl(resv, 0);
svc_putnl(resv, 0);
- break;
- case RPC_GSS_SVC_PRIVACY:
if (unwrap_priv_data(rqstp, &rqstp->rq_arg,
gc->gc_seq, rsci->mechctx))
goto garbage_args;
- /* placeholders for length and seq. number: */
- svc_putnl(resv, 0);
- svc_putnl(resv, 0);
break;
default:
goto auth_err;
@@ -1170,8 +1170,6 @@
goto out;
}
garbage_args:
- /* Restore write pointer to its original value: */
- xdr_ressize_check(rqstp, reject_stat);
ret = SVC_GARBAGE;
goto out;
auth_err:
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index 0517967..e6fb21b 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -243,10 +243,10 @@
}
EXPORT_SYMBOL_GPL(rpcb_getport_sync);
-static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt, struct rpcbind_args *map, int version)
+static struct rpc_task *rpcb_call_async(struct rpc_clnt *rpcb_clnt, struct rpcbind_args *map, struct rpc_procinfo *proc)
{
struct rpc_message msg = {
- .rpc_proc = rpcb_next_version[version].rpc_proc,
+ .rpc_proc = proc,
.rpc_argp = map,
.rpc_resp = &map->r_port,
};
@@ -271,6 +271,7 @@
void rpcb_getport_async(struct rpc_task *task)
{
struct rpc_clnt *clnt = task->tk_client;
+ struct rpc_procinfo *proc;
u32 bind_version;
struct rpc_xprt *xprt = task->tk_xprt;
struct rpc_clnt *rpcb_clnt;
@@ -280,7 +281,6 @@
struct sockaddr *sap = (struct sockaddr *)&addr;
size_t salen;
int status;
- struct rpcb_info *info;
dprintk("RPC: %5u %s(%s, %u, %u, %d)\n",
task->tk_pid, __func__,
@@ -313,10 +313,12 @@
/* Don't ever use rpcbind v2 for AF_INET6 requests */
switch (sap->sa_family) {
case AF_INET:
- info = rpcb_next_version;
+ proc = rpcb_next_version[xprt->bind_index].rpc_proc;
+ bind_version = rpcb_next_version[xprt->bind_index].rpc_vers;
break;
case AF_INET6:
- info = rpcb_next_version6;
+ proc = rpcb_next_version6[xprt->bind_index].rpc_proc;
+ bind_version = rpcb_next_version6[xprt->bind_index].rpc_vers;
break;
default:
status = -EAFNOSUPPORT;
@@ -324,14 +326,13 @@
task->tk_pid, __func__);
goto bailout_nofree;
}
- if (info[xprt->bind_index].rpc_proc == NULL) {
+ if (proc == NULL) {
xprt->bind_index = 0;
status = -EPFNOSUPPORT;
dprintk("RPC: %5u %s: no more getport versions available\n",
task->tk_pid, __func__);
goto bailout_nofree;
}
- bind_version = info[xprt->bind_index].rpc_vers;
dprintk("RPC: %5u %s: trying rpcbind version %u\n",
task->tk_pid, __func__, bind_version);
@@ -361,22 +362,20 @@
map->r_addr = rpc_peeraddr2str(rpcb_clnt, RPC_DISPLAY_UNIVERSAL_ADDR);
map->r_owner = RPCB_OWNER_STRING; /* ignored for GETADDR */
- child = rpcb_call_async(rpcb_clnt, map, xprt->bind_index);
+ child = rpcb_call_async(rpcb_clnt, map, proc);
rpc_release_client(rpcb_clnt);
if (IS_ERR(child)) {
status = -EIO;
+ /* rpcb_map_release() has freed the arguments */
dprintk("RPC: %5u %s: rpc_run_task failed\n",
task->tk_pid, __func__);
- goto bailout;
+ goto bailout_nofree;
}
rpc_put_task(child);
task->tk_xprt->stat.bind_count++;
return;
-bailout:
- kfree(map);
- xprt_put(xprt);
bailout_nofree:
rpcb_wake_rpcbind_waiters(xprt, status);
bailout_nowake:
diff --git a/security/commoncap.c b/security/commoncap.c
index 5edabc7..33d3433 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -103,10 +103,16 @@
return (cap_capable(current, CAP_SETPCAP) != 0);
}
+static inline int cap_limit_ptraced_target(void) { return 1; }
+
#else /* ie., ndef CONFIG_SECURITY_FILE_CAPABILITIES */
static inline int cap_block_setpcap(struct task_struct *t) { return 0; }
static inline int cap_inh_is_capped(void) { return 1; }
+static inline int cap_limit_ptraced_target(void)
+{
+ return !capable(CAP_SETPCAP);
+}
#endif /* def CONFIG_SECURITY_FILE_CAPABILITIES */
@@ -342,9 +348,10 @@
bprm->e_uid = current->uid;
bprm->e_gid = current->gid;
}
- if (!capable (CAP_SETPCAP)) {
- new_permitted = cap_intersect (new_permitted,
- current->cap_permitted);
+ if (cap_limit_ptraced_target()) {
+ new_permitted =
+ cap_intersect(new_permitted,
+ current->cap_permitted);
}
}
}
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index baf3488..fd764a0 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -382,6 +382,8 @@
case 'a':
wh.type = DEV_ALL;
wh.access = ACC_MASK;
+ wh.major = ~0;
+ wh.minor = ~0;
goto handle;
case 'b':
wh.type = DEV_BLOCK;
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 1dcf9f3..4458908 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -278,7 +278,7 @@
ent->fields.remote_irr = 0;
if (!ent->fields.mask && (ioapic->irr & (1 << gsi)))
- ioapic_deliver(ioapic, gsi);
+ ioapic_service(ioapic, gsi);
}
void kvm_ioapic_update_eoi(struct kvm *kvm, int vector)