Merge phase #5 (misc) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
Merges oprofile, timers/hpet, x86/traps, x86/time, and x86/core misc items.
* 'x86-core-v4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (132 commits)
x86: change early_ioremap to use slots instead of nesting
x86: adjust dependencies for CONFIG_X86_CMOV
dumpstack: x86: various small unification steps, fix
x86: remove additional_cpus
x86: remove additional_cpus configurability
x86: improve UP kernel when CPU-hotplug and SMP is enabled
dumpstack: x86: various small unification steps
dumpstack: i386: make kstack= an early boot-param and add oops=panic
dumpstack: x86: use log_lvl and unify trace formatting
dumptrace: x86: consistently include loglevel, print stack switch
dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack
dumpstack: x86: make printk_address equal
dumpstack: x86: move die_nmi to dumpstack_32.c
traps: x86: finalize unification of traps.c
traps: x86: make traps_32.c and traps_64.c equal
traps: x86: various noop-changes preparing for unification of traps_xx.c
traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection
traps: i386: expand clear_mem_error and remove from mach_traps.h
traps: x86_64: make io_check_error equal to the one on i386
traps: i386: use preempt_conditional_sti/cli in do_int3
...
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 3d2d0c2..cc8093c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -287,14 +287,6 @@
---------------------------
-What: old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE)
-When: 2.6.28
-Why: This driver still uses the old interface and has been replaced
- by CONFIG_SERIAL_MCF.
-Who: Sebastian Siewior <sebastian@breakpoint.cc>
-
----------------------------
-
What: /sys/o2cb symlink
When: January 2010
Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
diff --git a/MAINTAINERS b/MAINTAINERS
index 6ba3ee8..74b8082 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2797,15 +2797,6 @@
T: git git://git.infradead.org/mtd-2.6.git
S: Maintained
-MEI MN10300/AM33 PORT
-P: David Howells
-M: dhowells@redhat.com
-P: Koichi Yasutake
-M: yasutake.koichi@jp.panasonic.com
-L: linux-am33-list@redhat.com (moderated for non-subscribers)
-W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
-S: Maintained
-
MICROTEK X6 SCANNER
P: Oliver Neukum
M: oliver@neukum.name
@@ -3170,6 +3161,15 @@
L: i2c@lm-sensors.org
S: Maintained
+PANASONIC MN10300/AM33 PORT
+P: David Howells
+M: dhowells@redhat.com
+P: Koichi Yasutake
+M: yasutake.koichi@jp.panasonic.com
+L: linux-am33-list@redhat.com (moderated for non-subscribers)
+W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
+S: Maintained
+
PARALLEL PORT SUPPORT
L: linux-parport@lists.infradead.org (subscribers-only)
S: Orphan
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 93229b3..339293d 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -117,15 +117,14 @@
#ifdef CONFIG_BF54x
if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
- if (strncmp(device_id, "BFIN_UART", 9) == 0) {
- dma_ch[channel].regs->peripheral_map &= 0x0FFF;
- dma_ch[channel].regs->peripheral_map |=
+ unsigned int per_map;
+ per_map = dma_ch[channel].regs->peripheral_map & 0xFFF;
+ if (strncmp(device_id, "BFIN_UART", 9) == 0)
+ dma_ch[channel].regs->peripheral_map = per_map |
((channel - CH_UART2_RX + 0xC)<<12);
- } else {
- dma_ch[channel].regs->peripheral_map &= 0x0FFF;
- dma_ch[channel].regs->peripheral_map |=
+ else
+ dma_ch[channel].regs->peripheral_map = per_map |
((channel - CH_UART2_RX + 0x6)<<12);
- }
}
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6e..75722d6 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
@@ -119,7 +122,6 @@
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -164,8 +166,6 @@
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b..815bfe5 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
# endif
#endif
+#define BFIN_UART_TX_FIFO_SIZE 2
+
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
@@ -111,7 +113,6 @@
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -142,7 +143,6 @@
#define DRIVER_NAME "bfin-uart"
-int nr_ports = BFIN_UART_NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ff..b3f87e1 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
@@ -119,7 +122,6 @@
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -164,8 +166,6 @@
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446..e4cf35e 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -82,6 +82,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
/*
* The pin configuration is different from schematic
*/
@@ -105,7 +108,6 @@
#endif
};
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -170,8 +172,6 @@
#endif
};
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
#define DRIVER_NAME "bfin-uart"
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa0278..e0ce0c1 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
# endif
#endif
+#define BFIN_UART_TX_FIFO_SIZE 2
+
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
@@ -111,7 +113,6 @@
bfin_write16(uart->port.membase + OFFSET_LSR, -1);
}
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
struct bfin_serial_res {
unsigned long uart_base_addr;
int uart_irq;
@@ -142,7 +143,6 @@
#define DRIVER_NAME "bfin-uart"
-int nr_ports = BFIN_UART_NR_PORTS;
static void bfin_serial_hw_init(struct bfin_serial_port *uart)
{
diff --git a/arch/sparc/include/asm/serial.h b/arch/sparc/include/asm/serial.h
new file mode 100644
index 0000000..f90d61c
--- /dev/null
+++ b/arch/sparc/include/asm/serial.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_SERIAL_H
+#define __SPARC_SERIAL_H
+
+#define BASE_BAUD ( 1843200 / 16 )
+
+#endif /* __SPARC_SERIAL_H */
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index d741f35..14a102e 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -275,6 +275,8 @@
case TIOCGLTC:
case TIOCSLTC:
#endif
+ /* Note: these are out of date as we now have TCGETS2 etc but this
+ whole lot should probably go away */
case TCGETS:
case TCSETSF:
case TCSETSW:
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 8dfcf77..4426bb5 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -484,7 +484,7 @@
return -EUNATCH;
default:
- err = n_tty_ioctl(tty, file, cmd, arg);
+ err = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
};
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index caff851..700ff96 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -350,7 +350,7 @@
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
+ depends on STALDRV && (ISA || EISA || PCI)
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
@@ -361,7 +361,7 @@
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV && BROKEN_ON_SMP && (ISA || EISA || PCI)
+ depends on STALDRV && (ISA || EISA || PCI)
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 6850f6d..1a4247d 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -7,7 +7,7 @@
#
FONTMAPFILE = cp437.uni
-obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o
+obj-y += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 6e763e3..98821f9 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -837,9 +837,6 @@
struct async_struct *info;
unsigned long flags;
- if (!tty)
- return 0;
-
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
@@ -892,9 +889,6 @@
struct async_struct *info;
unsigned long flags;
- if (!tty)
- return 0;
-
info = tty->driver_data;
if (serial_paranoia_check(info, tty->name, "rs_write"))
diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c
index 31d08b6..b899d91 100644
--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@@ -712,8 +712,7 @@
IndexCard = adgl->num_card-1;
- if(cmd != 0 && cmd != 6 &&
- ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
+ if(cmd != 6 && ((IndexCard >= MAX_BOARD) || !apbs[IndexCard].RamIO)) {
static int warncount = 10;
if (warncount) {
printk( KERN_WARNING "APPLICOM driver IOCTL, bad board number %d\n",(int)IndexCard+1);
@@ -832,8 +831,7 @@
}
break;
default:
- printk(KERN_INFO "APPLICOM driver ioctl, unknown function code %d\n",cmd) ;
- ret = -EINVAL;
+ ret = -ENOTTY;
break;
}
Dummy = readb(apbs[IndexCard].RamIO + VERS);
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index fe6d774..5e5b1dc 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -4993,12 +4993,14 @@
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
card_name = "Cyclom-Y";
- addr0 = pci_iomap(pdev, 0, CyPCI_Yctl);
+ addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
+ CyPCI_Yctl);
if (addr0 == NULL) {
dev_err(&pdev->dev, "can't remap ctl region\n");
goto err_reg;
}
- addr2 = pci_iomap(pdev, 2, CyPCI_Ywin);
+ addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
+ CyPCI_Ywin);
if (addr2 == NULL) {
dev_err(&pdev->dev, "can't remap base region\n");
goto err_unmap;
@@ -5013,7 +5015,8 @@
} else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
struct RUNTIME_9060 __iomem *ctl_addr;
- ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl);
+ ctl_addr = addr0 = ioremap_nocache(pci_resource_start(pdev, 0),
+ CyPCI_Zctl);
if (addr0 == NULL) {
dev_err(&pdev->dev, "can't remap ctl region\n");
goto err_reg;
@@ -5026,8 +5029,8 @@
mailbox = (u32)readl(&ctl_addr->mail_box_0);
- addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ?
- CyPCI_Ze_win : CyPCI_Zwin);
+ addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
+ mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
if (addr2 == NULL) {
dev_err(&pdev->dev, "can't remap base region\n");
goto err_unmap;
@@ -5159,9 +5162,9 @@
cy_card[card_no].base_addr = NULL;
free_irq(irq, &cy_card[card_no]);
err_unmap:
- pci_iounmap(pdev, addr0);
+ iounmap(addr0);
if (addr2)
- pci_iounmap(pdev, addr2);
+ iounmap(addr2);
err_reg:
pci_release_regions(pdev);
err_dis:
@@ -5186,9 +5189,9 @@
cy_writew(cinfo->ctl_addr + 0x68,
readw(cinfo->ctl_addr + 0x68) & ~0x0900);
- pci_iounmap(pdev, cinfo->base_addr);
+ iounmap(cinfo->base_addr);
if (cinfo->ctl_addr)
- pci_iounmap(pdev, cinfo->ctl_addr);
+ iounmap(cinfo->ctl_addr);
if (cinfo->irq
#ifndef CONFIG_CYZ_INTR
&& !IS_CYC_Z(*cinfo)
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index 456e4ed..4998b27 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -1376,6 +1376,7 @@
unsigned long flags;
u16 tseg, rseg;
+ tty_port_init(&ch->port);
ch->brdchan = bc;
ch->mailbox = gd;
INIT_WORK(&ch->tqueue, do_softint);
@@ -1510,10 +1511,6 @@
ch->fepstopca = 0;
ch->close_delay = 50;
- ch->port.count = 0;
- ch->port.blocked_open = 0;
- init_waitqueue_head(&ch->port.open_wait);
- init_waitqueue_head(&ch->port.close_wait);
spin_unlock_irqrestore(&epca_lock, flags);
}
diff --git a/drivers/char/generic_serial.c b/drivers/char/generic_serial.c
index 19d3afb..c6090f8 100644
--- a/drivers/char/generic_serial.c
+++ b/drivers/char/generic_serial.c
@@ -54,8 +54,6 @@
func_enter ();
- if (!tty) return 0;
-
port = tty->driver_data;
if (!port) return 0;
@@ -97,8 +95,6 @@
func_enter ();
- if (!tty) return 0;
-
port = tty->driver_data;
if (!port) return 0;
@@ -185,7 +181,6 @@
struct gs_port *port;
func_enter ();
- if (!tty) return 0;
port = tty->driver_data;
if (!port->rd) return 0;
@@ -274,8 +269,6 @@
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -296,8 +289,6 @@
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -321,8 +312,6 @@
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -341,8 +330,6 @@
{
struct gs_port *port;
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
@@ -393,8 +380,6 @@
func_enter ();
- if (!tty) return;
-
port = tty->driver_data;
tty = port->port.tty;
if (!tty)
@@ -426,8 +411,6 @@
tty = port->port.tty;
- if (!tty) return 0;
-
gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n");
/*
* If the device is in the middle of being closed, then block
@@ -523,8 +506,6 @@
func_enter ();
- if (!tty) return;
-
port = (struct gs_port *) tty->driver_data;
if (!port) return;
@@ -621,8 +602,6 @@
func_enter();
- if (!tty) return;
-
port = tty->driver_data;
if (!port) return;
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index fd64137..ec7aded 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -819,11 +819,11 @@
hvc_driver = drv;
return 0;
-put_tty:
- put_tty_driver(hvc_driver);
stop_thread:
kthread_stop(hvc_task);
hvc_task = NULL;
+put_tty:
+ put_tty_driver(drv);
out:
return err;
}
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
index 939618f..bc397d9 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/char/ip2/Makefile
@@ -4,5 +4,5 @@
obj-$(CONFIG_COMPUTONE) += ip2.o
-ip2-objs := ip2base.o ip2main.o
+ip2-objs := ip2main.o
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
index 3601017..29db44d 100644
--- a/drivers/char/ip2/i2ellis.c
+++ b/drivers/char/ip2/i2ellis.c
@@ -69,38 +69,6 @@
//=======================================================
//******************************************************************************
-// Function: iiEllisInit()
-// Parameters: None
-//
-// Returns: Nothing
-//
-// Description:
-//
-// This routine performs any required initialization of the iiEllis subsystem.
-//
-//******************************************************************************
-static void
-iiEllisInit(void)
-{
-}
-
-//******************************************************************************
-// Function: iiEllisCleanup()
-// Parameters: None
-//
-// Returns: Nothing
-//
-// Description:
-//
-// This routine performs any required cleanup of the iiEllis subsystem.
-//
-//******************************************************************************
-static void
-iiEllisCleanup(void)
-{
-}
-
-//******************************************************************************
// Function: iiSetAddress(pB, address, delay)
// Parameters: pB - pointer to the board structure
// address - the purported I/O address of the board
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
index c88a64e..fb6df24 100644
--- a/drivers/char/ip2/i2ellis.h
+++ b/drivers/char/ip2/i2ellis.h
@@ -511,7 +511,6 @@
//
// Initialization of a board & structure is in four (five!) parts:
//
-// 0) iiEllisInit() - Initialize iiEllis subsystem.
// 1) iiSetAddress() - Define the board address & delay function for a board.
// 2) iiReset() - Reset the board (provided it exists)
// -- Note you may do this to several boards --
@@ -523,7 +522,6 @@
// loadware. To change loadware, you must begin again with step 2, resetting
// the board again (step 1 not needed).
-static void iiEllisInit(void);
static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t );
static int iiReset(i2eBordStrPtr);
static int iiResetDelay(i2eBordStrPtr);
diff --git a/drivers/char/ip2/ip2base.c b/drivers/char/ip2/ip2base.c
deleted file mode 100644
index 8155e24..0000000
--- a/drivers/char/ip2/ip2base.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// ip2.c
-// This is a dummy module to make the firmware available when needed
-// and allows it to be unloaded when not. Rumor is the __initdata
-// macro doesn't always works on all platforms so we use this kludge.
-// If not compiled as a module it just makes fip_firm avaliable then
-// __initdata should work as advertized
-//
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-
-#ifndef __init
-#define __init
-#endif
-#ifndef __initfunc
-#define __initfunc(a) a
-#endif
-#ifndef __initdata
-#define __initdata
-#endif
-
-#include "ip2types.h"
-
-int
-ip2_loadmain(int *, int *); // ref into ip2main.c
-
-/* Note: Add compiled in defaults to these arrays, not to the structure
- in ip2.h any longer. That structure WILL get overridden
- by these values, or command line values, or insmod values!!! =mhw=
-*/
-static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 };
-static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
-
-static int poll_only = 0;
-
-MODULE_AUTHOR("Doug McNash");
-MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards");
-module_param(poll_only, bool, 0);
-MODULE_PARM_DESC(poll_only,"Do not use card interrupts");
-
-
-static int __init ip2_init(void)
-{
- if( poll_only ) {
- /* Hard lock the interrupts to zero */
- irq[0] = irq[1] = irq[2] = irq[3] = 0;
- }
-
- return ip2_loadmain(io, irq);
-}
-module_init(ip2_init);
-
-MODULE_LICENSE("GPL");
-
-#ifndef MODULE
-/******************************************************************************
- * ip2_setup:
- * str: kernel command line string
- *
- * Can't autoprobe the boards so user must specify configuration on
- * kernel command line. Sane people build it modular but the others
- * come here.
- *
- * Alternating pairs of io,irq for up to 4 boards.
- * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
- *
- * io=0 => No board
- * io=1 => PCI
- * io=2 => EISA
- * else => ISA I/O address
- *
- * irq=0 or invalid for ISA will revert to polling mode
- *
- * Any value = -1, do not overwrite compiled in value.
- *
- ******************************************************************************/
-static int __init ip2_setup(char *str)
-{
- int ints[10]; /* 4 boards, 2 parameters + 2 */
- int i, j;
-
- str = get_options (str, ARRAY_SIZE(ints), ints);
-
- for( i = 0, j = 1; i < 4; i++ ) {
- if( j > ints[0] ) {
- break;
- }
- if( ints[j] >= 0 ) {
- io[i] = ints[j];
- }
- j++;
- if( j > ints[0] ) {
- break;
- }
- if( ints[j] >= 0 ) {
- irq[i] = ints[j];
- }
- j++;
- }
- return 1;
-}
-__setup("ip2=", ip2_setup);
-#endif /* !MODULE */
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 689f9dc..6774572 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -150,15 +150,12 @@
/*************/
/* String constants to identify ourselves */
-static char *pcName = "Computone IntelliPort Plus multiport driver";
-static char *pcVersion = "1.2.14";
+static const char pcName[] = "Computone IntelliPort Plus multiport driver";
+static const char pcVersion[] = "1.2.14";
/* String constants for port names */
-static char *pcDriver_name = "ip2";
-static char *pcIpl = "ip2ipl";
-
-// cheezy kludge or genius - you decide?
-int ip2_loadmain(int *, int *);
+static const char pcDriver_name[] = "ip2";
+static const char pcIpl[] = "ip2ipl";
/***********************/
/* Function Prototypes */
@@ -240,8 +237,8 @@
.open = ip2_ipl_open,
};
-static unsigned long irq_counter = 0;
-static unsigned long bh_counter = 0;
+static unsigned long irq_counter;
+static unsigned long bh_counter;
// Use immediate queue to service interrupts
#define USE_IQI
@@ -252,7 +249,6 @@
*/
#define POLL_TIMEOUT (jiffies + 1)
static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
-static char TimerOn;
#ifdef IP2DEBUG_TRACE
/* Trace (debug) buffer data */
@@ -268,8 +264,8 @@
/**********/
#if defined(MODULE) && defined(IP2DEBUG_OPEN)
-#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \
- tty->name,(pCh->flags),ip2_tty_driver->refcount, \
+#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
+ tty->name,(pCh->flags), \
tty->count,/*GET_USE_COUNT(module)*/0,s)
#else
#define DBG_CNT(s)
@@ -287,8 +283,9 @@
MODULE_AUTHOR("Doug McNash");
MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
+MODULE_LICENSE("GPL");
-static int poll_only = 0;
+static int poll_only;
static int Eisa_irq;
static int Eisa_slot;
@@ -297,34 +294,46 @@
static char rirqs[IP2_MAX_BOARDS];
static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
+/* Note: Add compiled in defaults to these arrays, not to the structure
+ in ip2.h any longer. That structure WILL get overridden
+ by these values, or command line values, or insmod values!!! =mhw=
+*/
+static int io[IP2_MAX_BOARDS];
+static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
+
+MODULE_AUTHOR("Doug McNash");
+MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
+module_param(poll_only, bool, 0);
+MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
+
/* for sysfs class support */
static struct class *ip2_class;
-// Some functions to keep track of what irq's we have
+/* Some functions to keep track of what irqs we have */
-static int
-is_valid_irq(int irq)
+static int __init is_valid_irq(int irq)
{
int *i = Valid_Irqs;
- while ((*i != 0) && (*i != irq)) {
+ while (*i != 0 && *i != irq)
i++;
- }
- return (*i);
+
+ return *i;
}
-static void
-mark_requested_irq( char irq )
+static void __init mark_requested_irq(char irq)
{
rirqs[iindx++] = irq;
}
-#ifdef MODULE
-static int
-clear_requested_irq( char irq )
+static int __exit clear_requested_irq(char irq)
{
int i;
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
if (rirqs[i] == irq) {
rirqs[i] = 0;
return 1;
@@ -332,17 +341,15 @@
}
return 0;
}
-#endif
-static int
-have_requested_irq( char irq )
+static int have_requested_irq(char irq)
{
- // array init to zeros so 0 irq will not be requested as a side effect
+ /* array init to zeros so 0 irq will not be requested as a side
+ * effect */
int i;
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i)
if (rirqs[i] == irq)
return 1;
- }
return 0;
}
@@ -361,53 +368,45 @@
/* handle subsequent installations of the driver. All memory allocated by the */
/* driver should be returned since it may be unloaded from memory. */
/******************************************************************************/
-#ifdef MODULE
-void __exit
-ip2_cleanup_module(void)
+static void __exit ip2_cleanup_module(void)
{
int err;
int i;
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion );
-#endif
- /* Stop poll timer if we had one. */
- if ( TimerOn ) {
- del_timer ( &PollTimer );
- TimerOn = 0;
- }
+ del_timer_sync(&PollTimer);
/* Reset the boards we have. */
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( i2BoardPtrTable[i] ) {
- iiReset( i2BoardPtrTable[i] );
- }
- }
+ for (i = 0; i < IP2_MAX_BOARDS; i++)
+ if (i2BoardPtrTable[i])
+ iiReset(i2BoardPtrTable[i]);
/* The following is done at most once, if any boards were installed. */
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( i2BoardPtrTable[i] ) {
- iiResetDelay( i2BoardPtrTable[i] );
+ for (i = 0; i < IP2_MAX_BOARDS; i++) {
+ if (i2BoardPtrTable[i]) {
+ iiResetDelay(i2BoardPtrTable[i]);
/* free io addresses and Tibet */
- release_region( ip2config.addr[i], 8 );
+ release_region(ip2config.addr[i], 8);
device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
- device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
+ device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR,
+ 4 * i + 1));
}
/* Disable and remove interrupt handler. */
- if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) {
- free_irq ( ip2config.irq[i], (void *)&pcName);
- clear_requested_irq( ip2config.irq[i]);
+ if (ip2config.irq[i] > 0 &&
+ have_requested_irq(ip2config.irq[i])) {
+ free_irq(ip2config.irq[i], (void *)&pcName);
+ clear_requested_irq(ip2config.irq[i]);
}
}
class_destroy(ip2_class);
- if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) {
- printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err);
- }
+ err = tty_unregister_driver(ip2_tty_driver);
+ if (err)
+ printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n",
+ err);
put_tty_driver(ip2_tty_driver);
unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
remove_proc_entry("ip2mem", NULL);
- // free memory
+ /* free memory */
for (i = 0; i < IP2_MAX_BOARDS; i++) {
void *pB;
#ifdef CONFIG_PCI
@@ -417,24 +416,18 @@
ip2config.pci_dev[i] = NULL;
}
#endif
- if ((pB = i2BoardPtrTable[i]) != 0 ) {
- kfree ( pB );
+ pB = i2BoardPtrTable[i];
+ if (pB != NULL) {
+ kfree(pB);
i2BoardPtrTable[i] = NULL;
}
- if ((DevTableMem[i]) != NULL ) {
- kfree ( DevTableMem[i] );
+ if (DevTableMem[i] != NULL) {
+ kfree(DevTableMem[i]);
DevTableMem[i] = NULL;
}
}
-
- /* Cleanup the iiEllis subsystem. */
- iiEllisCleanup();
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "IP2 Unloaded\n" );
-#endif
}
module_exit(ip2_cleanup_module);
-#endif /* MODULE */
static const struct tty_operations ip2_ops = {
.open = ip2_open,
@@ -494,139 +487,168 @@
return fw;
}
-int
-ip2_loadmain(int *iop, int *irqp)
+#ifndef MODULE
+/******************************************************************************
+ * ip2_setup:
+ * str: kernel command line string
+ *
+ * Can't autoprobe the boards so user must specify configuration on
+ * kernel command line. Sane people build it modular but the others
+ * come here.
+ *
+ * Alternating pairs of io,irq for up to 4 boards.
+ * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
+ *
+ * io=0 => No board
+ * io=1 => PCI
+ * io=2 => EISA
+ * else => ISA I/O address
+ *
+ * irq=0 or invalid for ISA will revert to polling mode
+ *
+ * Any value = -1, do not overwrite compiled in value.
+ *
+ ******************************************************************************/
+static int __init ip2_setup(char *str)
+{
+ int j, ints[10]; /* 4 boards, 2 parameters + 2 */
+ unsigned int i;
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+
+ for (i = 0, j = 1; i < 4; i++) {
+ if (j > ints[0])
+ break;
+ if (ints[j] >= 0)
+ io[i] = ints[j];
+ j++;
+ if (j > ints[0])
+ break;
+ if (ints[j] >= 0)
+ irq[i] = ints[j];
+ j++;
+ }
+ return 1;
+}
+__setup("ip2=", ip2_setup);
+#endif /* !MODULE */
+
+static int __init ip2_loadmain(void)
{
int i, j, box;
int err = 0;
- static int loaded;
i2eBordStrPtr pB = NULL;
int rc = -1;
- static struct pci_dev *pci_dev_i = NULL;
+ struct pci_dev *pdev = NULL;
const struct firmware *fw = NULL;
- ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
+ if (poll_only) {
+ /* Hard lock the interrupts to zero */
+ irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
+ }
+
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
/* process command line arguments to modprobe or
insmod i.e. iop & irqp */
/* irqp and iop should ALWAYS be specified now... But we check
them individually just to be sure, anyways... */
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if (iop) {
- ip2config.addr[i] = iop[i];
- if (irqp) {
- if( irqp[i] >= 0 ) {
- ip2config.irq[i] = irqp[i];
- } else {
- ip2config.irq[i] = 0;
- }
- // This is a little bit of a hack. If poll_only=1 on command
- // line back in ip2.c OR all IRQs on all specified boards are
- // explicitly set to 0, then drop to poll only mode and override
- // PCI or EISA interrupts. This superceeds the old hack of
- // triggering if all interrupts were zero (like da default).
- // Still a hack but less prone to random acts of terrorism.
- //
- // What we really should do, now that the IRQ default is set
- // to -1, is to use 0 as a hard coded, do not probe.
- //
- // /\/\|=mhw=|\/\/
- poll_only |= irqp[i];
- }
- }
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ ip2config.addr[i] = io[i];
+ if (irq[i] >= 0)
+ ip2config.irq[i] = irq[i];
+ else
+ ip2config.irq[i] = 0;
+ /* This is a little bit of a hack. If poll_only=1 on command
+ line back in ip2.c OR all IRQs on all specified boards are
+ explicitly set to 0, then drop to poll only mode and override
+ PCI or EISA interrupts. This superceeds the old hack of
+ triggering if all interrupts were zero (like da default).
+ Still a hack but less prone to random acts of terrorism.
+
+ What we really should do, now that the IRQ default is set
+ to -1, is to use 0 as a hard coded, do not probe.
+
+ /\/\|=mhw=|\/\/
+ */
+ poll_only |= irq[i];
}
poll_only = !poll_only;
/* Announce our presence */
- printk( KERN_INFO "%s version %s\n", pcName, pcVersion );
-
- // ip2 can be unloaded and reloaded for no good reason
- // we can't let that happen here or bad things happen
- // second load hoses board but not system - fixme later
- if (loaded) {
- printk( KERN_INFO "Still loaded\n" );
- return 0;
- }
- loaded++;
+ printk(KERN_INFO "%s version %s\n", pcName, pcVersion);
ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
if (!ip2_tty_driver)
return -ENOMEM;
- /* Initialise the iiEllis subsystem. */
- iiEllisInit();
-
- /* Initialize arrays. */
- memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable );
- memset( DevTable, 0, sizeof DevTable );
-
/* Initialise all the boards we can find (up to the maximum). */
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- switch ( ip2config.addr[i] ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ switch (ip2config.addr[i]) {
case 0: /* skip this slot even if card is present */
break;
default: /* ISA */
/* ISA address must be specified */
- if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) {
- printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n",
- i, ip2config.addr[i] );
+ if (ip2config.addr[i] < 0x100 ||
+ ip2config.addr[i] > 0x3f8) {
+ printk(KERN_ERR "IP2: Bad ISA board %d "
+ "address %x\n", i,
+ ip2config.addr[i]);
ip2config.addr[i] = 0;
- } else {
- ip2config.type[i] = ISA;
+ break;
+ }
+ ip2config.type[i] = ISA;
- /* Check for valid irq argument, set for polling if invalid */
- if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) {
- printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]);
- ip2config.irq[i] = 0;// 0 is polling and is valid in that sense
- }
+ /* Check for valid irq argument, set for polling if
+ * invalid */
+ if (ip2config.irq[i] &&
+ !is_valid_irq(ip2config.irq[i])) {
+ printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",
+ ip2config.irq[i]);
+ /* 0 is polling and is valid in that sense */
+ ip2config.irq[i] = 0;
}
break;
case PCI:
#ifdef CONFIG_PCI
- {
- int status;
+ {
+ u32 addr;
+ int status;
- pci_dev_i = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
- PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
- if (pci_dev_i != NULL) {
- unsigned int addr;
-
- if (pci_enable_device(pci_dev_i)) {
- printk( KERN_ERR "IP2: can't enable PCI device at %s\n",
- pci_name(pci_dev_i));
- break;
- }
- ip2config.type[i] = PCI;
- ip2config.pci_dev[i] = pci_dev_get(pci_dev_i);
- status =
- pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr);
- if ( addr & 1 ) {
- ip2config.addr[i]=(USHORT)(addr&0xfffe);
- } else {
- printk( KERN_ERR "IP2: PCI I/O address error\n");
- }
-
-// If the PCI BIOS assigned it, lets try and use it. If we
-// can't acquire it or it screws up, deal with it then.
-
-// if (!is_valid_irq(pci_irq)) {
-// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq);
-// pci_irq = 0;
-// }
- ip2config.irq[i] = pci_dev_i->irq;
- } else { // ann error
- ip2config.addr[i] = 0;
- printk(KERN_ERR "IP2: PCI board %d not found\n", i);
- }
+ pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
+ PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev);
+ if (pdev == NULL) {
+ ip2config.addr[i] = 0;
+ printk(KERN_ERR "IP2: PCI board %d not "
+ "found\n", i);
+ break;
}
+
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "can't enable device\n");
+ break;
+ }
+ ip2config.type[i] = PCI;
+ ip2config.pci_dev[i] = pci_dev_get(pdev);
+ status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1,
+ &addr);
+ if (addr & 1)
+ ip2config.addr[i] = (USHORT)(addr & 0xfffe);
+ else
+ dev_err(&pdev->dev, "I/O address error\n");
+
+ ip2config.irq[i] = pdev->irq;
+ }
#else
- printk( KERN_ERR "IP2: PCI card specified but PCI support not\n");
- printk( KERN_ERR "IP2: configured in this kernel.\n");
- printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n");
+ printk(KERN_ERR "IP2: PCI card specified but PCI "
+ "support not enabled.\n");
+ printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI "
+ "defined!\n");
#endif /* CONFIG_PCI */
break;
case EISA:
- if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) {
+ ip2config.addr[i] = find_eisa_board(Eisa_slot + 1);
+ if (ip2config.addr[i] != 0) {
/* Eisa_irq set as side effect, boo */
ip2config.type[i] = EISA;
}
@@ -634,31 +656,32 @@
break;
} /* switch */
} /* for */
- if (pci_dev_i)
- pci_dev_put(pci_dev_i);
+ pci_dev_put(pdev);
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( ip2config.addr[i] ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ if (ip2config.addr[i]) {
pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL);
if (pB) {
i2BoardPtrTable[i] = pB;
- iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer );
- iiReset( pB );
- } else {
- printk(KERN_ERR "IP2: board memory allocation error\n");
- }
+ iiSetAddress(pB, ip2config.addr[i],
+ ii2DelayTimer);
+ iiReset(pB);
+ } else
+ printk(KERN_ERR "IP2: board memory allocation "
+ "error\n");
}
}
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( ( pB = i2BoardPtrTable[i] ) != NULL ) {
- iiResetDelay( pB );
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ pB = i2BoardPtrTable[i];
+ if (pB != NULL) {
+ iiResetDelay(pB);
break;
}
}
- for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
/* We don't want to request the firmware unless we have at
least one board */
- if ( i2BoardPtrTable[i] != NULL ) {
+ if (i2BoardPtrTable[i] != NULL) {
if (!fw)
fw = ip2_request_firmware();
if (!fw)
@@ -669,7 +692,7 @@
if (fw)
release_firmware(fw);
- ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 );
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0);
ip2_tty_driver->owner = THIS_MODULE;
ip2_tty_driver->name = "ttyF";
@@ -680,20 +703,23 @@
ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
ip2_tty_driver->init_termios = tty_std_termios;
ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
- ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(ip2_tty_driver, &ip2_ops);
- ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 );
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0);
- /* Register the tty devices. */
- if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) {
- printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err);
+ err = tty_register_driver(ip2_tty_driver);
+ if (err) {
+ printk(KERN_ERR "IP2: failed to register tty driver\n");
put_tty_driver(ip2_tty_driver);
- return -EINVAL;
- } else
- /* Register the IPL driver. */
- if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) {
- printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err );
+ return err; /* leaking resources */
+ }
+
+ err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl);
+ if (err) {
+ printk(KERN_ERR "IP2: failed to register IPL device (%d)\n",
+ err);
} else {
/* create the sysfs class */
ip2_class = class_create(THIS_MODULE, "ip2");
@@ -705,84 +731,86 @@
/* Register the read_procmem thing */
if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) {
printk(KERN_ERR "IP2: failed to register read_procmem\n");
- } else {
+ return -EIO; /* leaking resources */
+ }
- ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 );
- /* Register the interrupt handler or poll handler, depending upon the
- * specified interrupt.
- */
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0);
+ /* Register the interrupt handler or poll handler, depending upon the
+ * specified interrupt.
+ */
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( 0 == ip2config.addr[i] ) {
- continue;
- }
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ if (ip2config.addr[i] == 0)
+ continue;
- if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
- device_create_drvdata(ip2_class, NULL,
- MKDEV(IP2_IPL_MAJOR, 4 * i),
- NULL, "ipl%d", i);
- device_create_drvdata(ip2_class, NULL,
- MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
- NULL, "stat%d", i);
+ pB = i2BoardPtrTable[i];
+ if (pB != NULL) {
+ device_create_drvdata(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i),
+ NULL, "ipl%d", i);
+ device_create_drvdata(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
+ NULL, "stat%d", i);
- for ( box = 0; box < ABS_MAX_BOXES; ++box )
- {
- for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
- {
- if ( pB->i2eChannelMap[box] & (1 << j) )
- {
- tty_register_device(ip2_tty_driver,
- j + ABS_BIGGEST_BOX *
- (box+i*ABS_MAX_BOXES), NULL);
- }
- }
- }
- }
-
- if (poll_only) {
-// Poll only forces driver to only use polling and
-// to ignore the probed PCI or EISA interrupts.
- ip2config.irq[i] = CIR_POLL;
- }
- if ( ip2config.irq[i] == CIR_POLL ) {
-retry:
- if (!TimerOn) {
- PollTimer.expires = POLL_TIMEOUT;
- add_timer ( &PollTimer );
- TimerOn = 1;
- printk( KERN_INFO "IP2: polling\n");
- }
- } else {
- if (have_requested_irq(ip2config.irq[i]))
- continue;
- rc = request_irq( ip2config.irq[i], ip2_interrupt,
- IP2_SA_FLAGS | (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
- pcName, i2BoardPtrTable[i]);
- if (rc) {
- printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);
- ip2config.irq[i] = CIR_POLL;
- printk( KERN_INFO "IP2: Polling %ld/sec.\n",
- (POLL_TIMEOUT - jiffies));
- goto retry;
- }
- mark_requested_irq(ip2config.irq[i]);
- /* Initialise the interrupt handler bottom half (aka slih). */
- }
+ for (box = 0; box < ABS_MAX_BOXES; box++)
+ for (j = 0; j < ABS_BIGGEST_BOX; j++)
+ if (pB->i2eChannelMap[box] & (1 << j))
+ tty_register_device(
+ ip2_tty_driver,
+ j + ABS_BIGGEST_BOX *
+ (box+i*ABS_MAX_BOXES),
+ NULL);
}
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- if ( i2BoardPtrTable[i] ) {
- set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */
+
+ if (poll_only) {
+ /* Poll only forces driver to only use polling and
+ to ignore the probed PCI or EISA interrupts. */
+ ip2config.irq[i] = CIR_POLL;
+ }
+ if (ip2config.irq[i] == CIR_POLL) {
+retry:
+ if (!timer_pending(&PollTimer)) {
+ mod_timer(&PollTimer, POLL_TIMEOUT);
+ printk(KERN_INFO "IP2: polling\n");
}
+ } else {
+ if (have_requested_irq(ip2config.irq[i]))
+ continue;
+ rc = request_irq(ip2config.irq[i], ip2_interrupt,
+ IP2_SA_FLAGS |
+ (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
+ pcName, i2BoardPtrTable[i]);
+ if (rc) {
+ printk(KERN_ERR "IP2: request_irq failed: "
+ "error %d\n", rc);
+ ip2config.irq[i] = CIR_POLL;
+ printk(KERN_INFO "IP2: Polling %ld/sec.\n",
+ (POLL_TIMEOUT - jiffies));
+ goto retry;
+ }
+ mark_requested_irq(ip2config.irq[i]);
+ /* Initialise the interrupt handler bottom half
+ * (aka slih). */
}
}
- ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 );
- goto out;
+
+ for (i = 0; i < IP2_MAX_BOARDS; ++i) {
+ if (i2BoardPtrTable[i]) {
+ /* set and enable board interrupt */
+ set_irq(i, ip2config.irq[i]);
+ }
+ }
+
+ ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0);
+
+ return 0;
out_chrdev:
unregister_chrdev(IP2_IPL_MAJOR, "ip2");
-out:
+ /* unregister and put tty here */
return err;
}
+module_init(ip2_loadmain);
/******************************************************************************/
/* Function: ip2_init_board() */
@@ -1199,9 +1227,8 @@
{
int i;
i2eBordStrPtr pB;
- const int irq = 0;
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq );
+ ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0);
/* Service just the boards on the list using this irq */
for( i = 0; i < i2nBoards; ++i ) {
@@ -1210,9 +1237,8 @@
// Only process those boards which match our IRQ.
// IRQ = 0 for polled boards, we won't poll "IRQ" boards
- if ( pB && (pB->i2eUsingIrq == irq) ) {
+ if (pB && pB->i2eUsingIrq == 0)
ip2_irq_work(pB);
- }
}
++irq_counter;
@@ -1250,16 +1276,12 @@
{
ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
- TimerOn = 0; // it's the truth but not checked in service
-
// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
// It will NOT poll boards handled by hard interrupts.
// The issue of queued BH interrupts is handled in ip2_interrupt().
ip2_polled_interrupt();
- PollTimer.expires = POLL_TIMEOUT;
- add_timer( &PollTimer );
- TimerOn = 1;
+ mod_timer(&PollTimer, POLL_TIMEOUT);
ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
}
@@ -2871,7 +2893,7 @@
case 13:
switch ( cmd ) {
case 64: /* Driver - ip2stat */
- rc = put_user(ip2_tty_driver->refcount, pIndex++ );
+ rc = put_user(-1, pIndex++ );
rc = put_user(irq_counter, pIndex++ );
rc = put_user(bh_counter, pIndex++ );
break;
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 8f7cc19..7d30ee1 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -421,17 +421,16 @@
if (retries >= 100)
goto unlock;
+ tty = tty_port_tty_get(&port->port);
+ if (tty == NULL)
+ goto put_unlock;
+
for (; count > 0; count--, port++) {
/* port not active or tx disabled to force flow control */
if (!(port->port.flags & ASYNC_INITIALIZED) ||
!(port->status & ISI_TXOK))
continue;
- tty = port->port.tty;
-
- if (tty == NULL)
- continue;
-
txcount = min_t(short, TX_SIZE, port->xmit_cnt);
if (txcount <= 0 || tty->stopped || tty->hw_stopped)
continue;
@@ -489,6 +488,8 @@
tty_wakeup(tty);
}
+put_unlock:
+ tty_kref_put(tty);
unlock:
spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
/* schedule another tx for hopefully in about 10ms */
@@ -547,7 +548,7 @@
return IRQ_HANDLED;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty == NULL) {
word_count = byte_count >> 1;
while (byte_count > 1) {
@@ -588,7 +589,7 @@
}
if (port->port.flags & ASYNC_CTS_FLOW) {
- if (port->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (header & ISI_CTS) {
port->port.tty->hw_stopped = 0;
/* start tx ing */
@@ -597,7 +598,7 @@
tty_wakeup(tty);
}
} else if (!(header & ISI_CTS)) {
- port->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
/* stop tx ing */
port->status &= ~(ISI_TXOK | ISI_CTS);
}
@@ -660,24 +661,21 @@
}
outw(0x0000, base+0x04); /* enable interrupts */
spin_unlock(&card->card_lock);
+ tty_kref_put(tty);
return IRQ_HANDLED;
}
-static void isicom_config_port(struct isi_port *port)
+static void isicom_config_port(struct tty_struct *tty)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
- struct tty_struct *tty;
unsigned long baud;
unsigned long base = card->base;
u16 channel_setup, channel = port->channel,
shift_count = card->shift_count;
unsigned char flow_ctrl;
- tty = port->port.tty;
-
- if (tty == NULL)
- return;
/* FIXME: Switch to new tty baud API */
baud = C_BAUD(tty);
if (baud & CBAUDEX) {
@@ -690,7 +688,7 @@
/* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
if (baud < 1 || baud > 4)
- port->port.tty->termios->c_cflag &= ~CBAUDEX;
+ tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
}
@@ -797,8 +795,9 @@
spin_unlock_irqrestore(&bp->card_lock, flags);
}
-static int isicom_setup_port(struct isi_port *port)
+static int isicom_setup_port(struct tty_struct *tty)
{
+ struct isi_port *port = tty->driver_data;
struct isi_board *card = port->card;
unsigned long flags;
@@ -808,8 +807,7 @@
return -ENOMEM;
spin_lock_irqsave(&card->card_lock, flags);
- if (port->port.tty)
- clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
if (port->port.count == 1)
card->count++;
@@ -823,7 +821,7 @@
InterruptTheCard(card->base);
}
- isicom_config_port(port);
+ isicom_config_port(tty);
port->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -934,8 +932,8 @@
port->port.count++;
tty->driver_data = port;
- port->port.tty = tty;
- error = isicom_setup_port(port);
+ tty_port_tty_set(&port->port, tty);
+ error = isicom_setup_port(tty);
if (error == 0)
error = block_til_ready(tty, filp, port);
return error;
@@ -955,15 +953,17 @@
struct isi_board *card = port->card;
struct tty_struct *tty;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
- if (!(port->port.flags & ASYNC_INITIALIZED))
+ if (!(port->port.flags & ASYNC_INITIALIZED)) {
+ tty_kref_put(tty);
return;
+ }
tty_port_free_xmit_buf(&port->port);
port->port.flags &= ~ASYNC_INITIALIZED;
/* 3rd October 2000 : Vinayak P Risbud */
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
/*Fix done by Anil .S on 30-04-2001
remote login through isi port has dtr toggle problem
@@ -1243,9 +1243,10 @@
return 0;
}
-static int isicom_set_serial_info(struct isi_port *port,
- struct serial_struct __user *info)
+static int isicom_set_serial_info(struct tty_struct *tty,
+ struct serial_struct __user *info)
{
+ struct isi_port *port = tty->driver_data;
struct serial_struct newinfo;
int reconfig_port;
@@ -1276,7 +1277,7 @@
if (reconfig_port) {
unsigned long flags;
spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_config_port(port);
+ isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
}
unlock_kernel();
@@ -1318,7 +1319,7 @@
return isicom_get_serial_info(port, argp);
case TIOCSSERIAL:
- return isicom_set_serial_info(port, argp);
+ return isicom_set_serial_info(tty, argp);
default:
return -ENOIOCTLCMD;
@@ -1341,7 +1342,7 @@
return;
spin_lock_irqsave(&port->card->card_lock, flags);
- isicom_config_port(port);
+ isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1419,7 +1420,7 @@
port->port.count = 0;
port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
wake_up_interruptible(&port->port.open_wait);
}
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 843a2af..505d7a1 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -623,24 +623,25 @@
static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
static void stli_poll(unsigned long arg);
static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
-static int stli_initopen(struct stlibrd *brdp, struct stliport *portp);
+static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp);
-static int stli_setport(struct stliport *portp);
+static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
+ struct stliport *portp, struct file *filp);
+static int stli_setport(struct tty_struct *tty);
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
+static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
static void stli_read(struct stlibrd *brdp, struct stliport *portp);
static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
-static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp);
+static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp);
static int stli_getbrdstats(combrd_t __user *bp);
-static int stli_getportstats(struct stliport *portp, comstats_t __user *cp);
-static int stli_portcmdstats(struct stliport *portp);
+static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp);
+static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp);
static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
static int stli_getportstruct(struct stliport __user *arg);
static int stli_getbrdstruct(struct stlibrd __user *arg);
@@ -731,12 +732,16 @@
{
struct stliport *portp;
unsigned int j;
+ struct tty_struct *tty;
for (j = 0; j < STL_MAXPORTS; j++) {
portp = brdp->ports[j];
if (portp != NULL) {
- if (portp->port.tty != NULL)
- tty_hangup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty != NULL) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
kfree(portp);
}
}
@@ -824,7 +829,7 @@
* requires several commands to the board we will need to wait for any
* other open that is already initializing the port.
*/
- portp->port.tty = tty;
+ tty_port_tty_set(&portp->port, tty);
tty->driver_data = portp;
portp->port.count++;
@@ -835,7 +840,7 @@
if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
- if ((rc = stli_initopen(brdp, portp)) >= 0) {
+ if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
portp->port.flags |= ASYNC_INITIALIZED;
clear_bit(TTY_IO_ERROR, &tty->flags);
}
@@ -864,7 +869,7 @@
* then also we might have to wait for carrier.
*/
if (!(filp->f_flags & O_NONBLOCK)) {
- if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0)
+ if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0)
return rc;
}
portp->port.flags |= ASYNC_NORMAL_ACTIVE;
@@ -930,7 +935,7 @@
stli_flushbuffer(tty);
tty->closing = 0;
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
if (portp->openwaitcnt) {
if (portp->close_delay)
@@ -952,9 +957,9 @@
* this still all happens pretty quickly.
*/
-static int stli_initopen(struct stlibrd *brdp, struct stliport *portp)
+static int stli_initopen(struct tty_struct *tty,
+ struct stlibrd *brdp, struct stliport *portp)
{
- struct tty_struct *tty;
asynotify_t nt;
asyport_t aport;
int rc;
@@ -969,10 +974,7 @@
sizeof(asynotify_t), 0)) < 0)
return rc;
- tty = portp->port.tty;
- if (tty == NULL)
- return -ENODEV;
- stli_mkasyport(portp, &aport, tty->termios);
+ stli_mkasyport(tty, portp, &aport, tty->termios);
if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
sizeof(asyport_t), 0)) < 0)
return rc;
@@ -1161,22 +1163,21 @@
* waiting for the command to complete - so must have user context.
*/
-static int stli_setport(struct stliport *portp)
+static int stli_setport(struct tty_struct *tty)
{
+ struct stliport *portp = tty->driver_data;
struct stlibrd *brdp;
asyport_t aport;
if (portp == NULL)
return -ENODEV;
- if (portp->port.tty == NULL)
- return -ENODEV;
if (portp->brdnr >= stli_nrbrds)
return -ENODEV;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
return -ENODEV;
- stli_mkasyport(portp, &aport, portp->port.tty->termios);
+ stli_mkasyport(tty, portp, &aport, tty->termios);
return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
}
@@ -1187,7 +1188,8 @@
* maybe because if we are clocal then we don't need to wait...
*/
-static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp)
+static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
+ struct stliport *portp, struct file *filp)
{
unsigned long flags;
int rc, doclocal;
@@ -1195,7 +1197,7 @@
rc = 0;
doclocal = 0;
- if (portp->port.tty->termios->c_cflag & CLOCAL)
+ if (tty->termios->c_cflag & CLOCAL)
doclocal++;
spin_lock_irqsave(&stli_lock, flags);
@@ -1373,8 +1375,6 @@
stli_txcookrealsize = 0;
stli_txcooktty = NULL;
- if (tty == NULL)
- return;
if (cooktty == NULL)
return;
if (tty != cooktty)
@@ -1572,10 +1572,11 @@
* just quietly ignore any requests to change irq, etc.
*/
-static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp)
+static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
{
struct serial_struct sio;
int rc;
+ struct stliport *portp = tty->driver_data;
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
@@ -1594,7 +1595,7 @@
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- if ((rc = stli_setport(portp)) < 0)
+ if ((rc = stli_setport(tty)) < 0)
return rc;
return 0;
}
@@ -1685,17 +1686,17 @@
rc = stli_getserial(portp, argp);
break;
case TIOCSSERIAL:
- rc = stli_setserial(portp, argp);
+ rc = stli_setserial(tty, argp);
break;
case STL_GETPFLAG:
rc = put_user(portp->pflag, (unsigned __user *)argp);
break;
case STL_SETPFLAG:
if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0)
- stli_setport(portp);
+ stli_setport(tty);
break;
case COM_GETPORTSTATS:
- rc = stli_getportstats(portp, argp);
+ rc = stli_getportstats(tty, portp, argp);
break;
case COM_CLRPORTSTATS:
rc = stli_clrportstats(portp, argp);
@@ -1729,8 +1730,6 @@
struct ktermios *tiosp;
asyport_t aport;
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1742,7 +1741,7 @@
tiosp = tty->termios;
- stli_mkasyport(portp, &aport, tiosp);
+ stli_mkasyport(tty, portp, &aport, tiosp);
stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0);
stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1);
stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
@@ -1854,7 +1853,7 @@
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
portp->port.count = 0;
spin_unlock_irqrestore(&stli_lock, flags);
@@ -1935,8 +1934,6 @@
struct stliport *portp;
unsigned long tend;
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1998,7 +1995,7 @@
char *sp, *uart;
int rc, cnt;
- rc = stli_portcmdstats(portp);
+ rc = stli_portcmdstats(NULL, portp);
uart = "UNKNOWN";
if (brdp->state & BST_STARTED) {
@@ -2188,7 +2185,7 @@
if (test_bit(ST_RXSTOP, &portp->state))
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -2230,6 +2227,7 @@
set_bit(ST_RXING, &portp->state);
tty_schedule_flip(tty);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -2362,7 +2360,7 @@
if (ap->notify) {
nt = ap->changed;
ap->notify = 0;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (nt.signal & SG_DCD) {
oldsigs = portp->sigs;
@@ -2399,6 +2397,7 @@
tty_schedule_flip(tty);
}
}
+ tty_kref_put(tty);
if (nt.data & DT_RXBUSY) {
donerx++;
@@ -2535,14 +2534,15 @@
* the slave.
*/
-static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp)
+static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp,
+ asyport_t *pp, struct ktermios *tiosp)
{
memset(pp, 0, sizeof(asyport_t));
/*
* Start of by setting the baud, char size, parity and stop bit info.
*/
- pp->baudout = tty_get_baud_rate(portp->port.tty);
+ pp->baudout = tty_get_baud_rate(tty);
if ((tiosp->c_cflag & CBAUD) == B38400) {
if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
pp->baudout = 57600;
@@ -2695,7 +2695,7 @@
printk("STALLION: failed to allocate port structure\n");
continue;
}
-
+ tty_port_init(&portp->port);
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
@@ -4220,7 +4220,7 @@
* what port to get stats for (used through board control device).
*/
-static int stli_portcmdstats(struct stliport *portp)
+static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
{
unsigned long flags;
struct stlibrd *brdp;
@@ -4249,15 +4249,15 @@
stli_comstats.flags = portp->port.flags;
spin_lock_irqsave(&brd_lock, flags);
- if (portp->port.tty != NULL) {
- if (portp->port.tty->driver_data == portp) {
- stli_comstats.ttystate = portp->port.tty->flags;
+ if (tty != NULL) {
+ if (portp->port.tty == tty) {
+ stli_comstats.ttystate = tty->flags;
stli_comstats.rxbuffered = -1;
- if (portp->port.tty->termios != NULL) {
- stli_comstats.cflags = portp->port.tty->termios->c_cflag;
- stli_comstats.iflags = portp->port.tty->termios->c_iflag;
- stli_comstats.oflags = portp->port.tty->termios->c_oflag;
- stli_comstats.lflags = portp->port.tty->termios->c_lflag;
+ if (tty->termios != NULL) {
+ stli_comstats.cflags = tty->termios->c_cflag;
+ stli_comstats.iflags = tty->termios->c_iflag;
+ stli_comstats.oflags = tty->termios->c_oflag;
+ stli_comstats.lflags = tty->termios->c_lflag;
}
}
}
@@ -4294,7 +4294,8 @@
* what port to get stats for (used through board control device).
*/
-static int stli_getportstats(struct stliport *portp, comstats_t __user *cp)
+static int stli_getportstats(struct tty_struct *tty, struct stliport *portp,
+ comstats_t __user *cp)
{
struct stlibrd *brdp;
int rc;
@@ -4312,7 +4313,7 @@
if (!brdp)
return -ENODEV;
- if ((rc = stli_portcmdstats(portp)) < 0)
+ if ((rc = stli_portcmdstats(tty, portp)) < 0)
return rc;
return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ?
@@ -4427,7 +4428,7 @@
switch (cmd) {
case COM_GETPORTSTATS:
- rc = stli_getportstats(NULL, argp);
+ rc = stli_getportstats(NULL, NULL, argp);
done++;
break;
case COM_CLRPORTSTATS:
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index d3d7864e..5df4003 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -205,7 +205,7 @@
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_shut_down(struct moxa_port *);
+static void moxa_shut_down(struct tty_struct *);
/*
* moxa board interface functions:
*/
@@ -217,7 +217,7 @@
static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
static int MoxaPortLineStatus(struct moxa_port *);
static void MoxaPortFlushData(struct moxa_port *, int);
-static int MoxaPortWriteData(struct moxa_port *, const unsigned char *, int);
+static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
static int MoxaPortReadData(struct moxa_port *);
static int MoxaPortTxQueue(struct moxa_port *);
static int MoxaPortRxQueue(struct moxa_port *);
@@ -332,6 +332,7 @@
for (i = 0; i < MAX_BOARDS; i++) {
p = moxa_boards[i].ports;
for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ struct tty_struct *ttyp;
memset(&tmp, 0, sizeof(tmp));
if (!moxa_boards[i].ready)
goto copy;
@@ -344,10 +345,12 @@
if (status & 4)
tmp.dcd = 1;
- if (!p->port.tty || !p->port.tty->termios)
+ ttyp = tty_port_tty_get(&p->port);
+ if (!ttyp || !ttyp->termios)
tmp.cflag = p->cflag;
else
- tmp.cflag = p->port.tty->termios->c_cflag;
+ tmp.cflag = ttyp->termios->c_cflag;
+ tty_kref_put(tty);
copy:
if (copy_to_user(argm, &tmp, sizeof(tmp))) {
mutex_unlock(&moxa_openlock);
@@ -880,8 +883,14 @@
/* pci hot-un-plug support */
for (a = 0; a < brd->numPorts; a++)
- if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
- tty_hangup(brd->ports[a].port.tty);
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
+ struct tty_struct *tty = tty_port_tty_get(
+ &brd->ports[a].port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+ }
while (1) {
opened = 0;
for (a = 0; a < brd->numPorts; a++)
@@ -1096,13 +1105,14 @@
module_init(moxa_init);
module_exit(moxa_exit);
-static void moxa_close_port(struct moxa_port *ch)
+static void moxa_close_port(struct tty_struct *tty)
{
- moxa_shut_down(ch);
+ struct moxa_port *ch = tty->driver_data;
+ moxa_shut_down(tty);
MoxaPortFlushData(ch, 2);
ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- ch->port.tty->driver_data = NULL;
- ch->port.tty = NULL;
+ tty->driver_data = NULL;
+ tty_port_tty_set(&ch->port, NULL);
}
static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
@@ -1161,7 +1171,7 @@
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
ch->port.count++;
tty->driver_data = ch;
- ch->port.tty = tty;
+ tty_port_tty_set(&ch->port, tty);
if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
@@ -1179,7 +1189,7 @@
if (retval) {
if (ch->port.count) /* 0 means already hung up... */
if (--ch->port.count == 0)
- moxa_close_port(ch);
+ moxa_close_port(tty);
} else
ch->port.flags |= ASYNC_NORMAL_ACTIVE;
mutex_unlock(&moxa_openlock);
@@ -1219,7 +1229,7 @@
tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
}
- moxa_close_port(ch);
+ moxa_close_port(tty);
unlock:
mutex_unlock(&moxa_openlock);
}
@@ -1234,7 +1244,7 @@
return 0;
spin_lock_bh(&moxa_lock);
- len = MoxaPortWriteData(ch, buf, count);
+ len = MoxaPortWriteData(tty, buf, count);
spin_unlock_bh(&moxa_lock);
ch->statusflags |= LOWWAIT;
@@ -1409,7 +1419,7 @@
return;
}
ch->port.count = 0;
- moxa_close_port(ch);
+ moxa_close_port(tty);
mutex_unlock(&moxa_openlock);
wake_up_interruptible(&ch->port.open_wait);
@@ -1417,11 +1427,14 @@
static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
{
+ struct tty_struct *tty;
dcd = !!dcd;
- if (dcd != p->DCDState && p->port.tty && C_CLOCAL(p->port.tty)) {
- if (!dcd)
- tty_hangup(p->port.tty);
+ if (dcd != p->DCDState) {
+ tty = tty_port_tty_get(&p->port);
+ if (tty && C_CLOCAL(tty) && !dcd)
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
p->DCDState = dcd;
}
@@ -1429,7 +1442,7 @@
static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
u16 __iomem *ip)
{
- struct tty_struct *tty = p->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&p->port);
void __iomem *ofsAddr;
unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
u16 intr;
@@ -1476,6 +1489,7 @@
tty_insert_flip_char(tty, 0, TTY_BREAK);
tty_schedule_flip(tty);
}
+ tty_kref_put(tty);
if (intr & IntrLine)
moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
@@ -1560,9 +1574,9 @@
spin_unlock_bh(&moxa_lock);
}
-static void moxa_shut_down(struct moxa_port *ch)
+static void moxa_shut_down(struct tty_struct *tty)
{
- struct tty_struct *tp = ch->port.tty;
+ struct moxa_port *ch = tty->driver_data;
if (!(ch->port.flags & ASYNC_INITIALIZED))
return;
@@ -1572,7 +1586,7 @@
/*
* If we're a modem control device and HUPCL is on, drop RTS & DTR.
*/
- if (C_HUPCL(tp))
+ if (C_HUPCL(tty))
MoxaPortLineCtrl(ch, 0, 0);
spin_lock_bh(&moxa_lock);
@@ -1953,9 +1967,10 @@
return val;
}
-static int MoxaPortWriteData(struct moxa_port *port,
+static int MoxaPortWriteData(struct tty_struct *tty,
const unsigned char *buffer, int len)
{
+ struct moxa_port *port = tty->driver_data;
void __iomem *baseAddr, *ofsAddr, *ofs;
unsigned int c, total;
u16 head, tail, tx_mask, spage, epage;
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index b638403..8beef50 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -610,15 +610,13 @@
return 0;
}
-static int mxser_set_baud(struct mxser_port *info, long newspd)
+static int mxser_set_baud(struct tty_struct *tty, long newspd)
{
+ struct mxser_port *info = tty->driver_data;
int quot = 0, baud;
unsigned char cval;
- if (!info->port.tty || !info->port.tty->termios)
- return -1;
-
- if (!(info->ioaddr))
+ if (!info->ioaddr)
return -1;
if (newspd > info->max_baud)
@@ -626,13 +624,13 @@
if (newspd == 134) {
quot = 2 * info->baud_base / 269;
- tty_encode_baud_rate(info->port.tty, 134, 134);
+ tty_encode_baud_rate(tty, 134, 134);
} else if (newspd) {
quot = info->baud_base / newspd;
if (quot == 0)
quot = 1;
baud = info->baud_base/quot;
- tty_encode_baud_rate(info->port.tty, baud, baud);
+ tty_encode_baud_rate(tty, baud, baud);
} else {
quot = 0;
}
@@ -658,7 +656,7 @@
outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
#ifdef BOTHER
- if (C_BAUD(info->port.tty) == BOTHER) {
+ if (C_BAUD(tty) == BOTHER) {
quot = info->baud_base % newspd;
quot *= 8;
if (quot % newspd > newspd / 2) {
@@ -679,21 +677,20 @@
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static int mxser_change_speed(struct mxser_port *info,
- struct ktermios *old_termios)
+static int mxser_change_speed(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
+ struct mxser_port *info = tty->driver_data;
unsigned cflag, cval, fcr;
int ret = 0;
unsigned char status;
- if (!info->port.tty || !info->port.tty->termios)
- return ret;
- cflag = info->port.tty->termios->c_cflag;
- if (!(info->ioaddr))
+ cflag = tty->termios->c_cflag;
+ if (!info->ioaddr)
return ret;
- if (mxser_set_baud_method[info->port.tty->index] == 0)
- mxser_set_baud(info, tty_get_baud_rate(info->port.tty));
+ if (mxser_set_baud_method[tty->index] == 0)
+ mxser_set_baud(tty, tty_get_baud_rate(tty));
/* byte size and parity */
switch (cflag & CSIZE) {
@@ -762,9 +759,9 @@
info->MCR |= UART_MCR_AFE;
} else {
status = inb(info->ioaddr + UART_MSR);
- if (info->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
- info->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
if (info->type != PORT_16550A &&
!info->board->chip_flag) {
outb(info->IER & ~UART_IER_THRI,
@@ -774,11 +771,11 @@
outb(info->IER, info->ioaddr +
UART_IER);
}
- tty_wakeup(info->port.tty);
+ tty_wakeup(tty);
}
} else {
if (!(status & UART_MSR_CTS)) {
- info->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
if ((info->type != PORT_16550A) &&
(!info->board->chip_flag)) {
info->IER &= ~UART_IER_THRI;
@@ -804,21 +801,21 @@
* Set up parity check flag
*/
info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (I_INPCK(info->port.tty))
+ if (I_INPCK(tty))
info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ if (I_BRKINT(tty) || I_PARMRK(tty))
info->read_status_mask |= UART_LSR_BI;
info->ignore_status_mask = 0;
- if (I_IGNBRK(info->port.tty)) {
+ if (I_IGNBRK(tty)) {
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
/*
* If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
- if (I_IGNPAR(info->port.tty)) {
+ if (I_IGNPAR(tty)) {
info->ignore_status_mask |=
UART_LSR_OE |
UART_LSR_PE |
@@ -830,16 +827,16 @@
}
}
if (info->board->chip_flag) {
- mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->port.tty));
- mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->port.tty));
- if (I_IXON(info->port.tty)) {
+ mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
+ mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
+ if (I_IXON(tty)) {
mxser_enable_must_rx_software_flow_control(
info->ioaddr);
} else {
mxser_disable_must_rx_software_flow_control(
info->ioaddr);
}
- if (I_IXOFF(info->port.tty)) {
+ if (I_IXOFF(tty)) {
mxser_enable_must_tx_software_flow_control(
info->ioaddr);
} else {
@@ -855,7 +852,8 @@
return ret;
}
-static void mxser_check_modem_status(struct mxser_port *port, int status)
+static void mxser_check_modem_status(struct tty_struct *tty,
+ struct mxser_port *port, int status)
{
/* update input line counters */
if (status & UART_MSR_TERI)
@@ -874,10 +872,11 @@
wake_up_interruptible(&port->port.open_wait);
}
+ tty = tty_port_tty_get(&port->port);
if (port->port.flags & ASYNC_CTS_FLOW) {
- if (port->port.tty->hw_stopped) {
+ if (tty->hw_stopped) {
if (status & UART_MSR_CTS) {
- port->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
if ((port->type != PORT_16550A) &&
(!port->board->chip_flag)) {
@@ -887,11 +886,11 @@
outb(port->IER, port->ioaddr +
UART_IER);
}
- tty_wakeup(port->port.tty);
+ tty_wakeup(tty);
}
} else {
if (!(status & UART_MSR_CTS)) {
- port->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
if (port->type != PORT_16550A &&
!port->board->chip_flag) {
port->IER &= ~UART_IER_THRI;
@@ -903,8 +902,9 @@
}
}
-static int mxser_startup(struct mxser_port *info)
+static int mxser_startup(struct tty_struct *tty)
{
+ struct mxser_port *info = tty->driver_data;
unsigned long page;
unsigned long flags;
@@ -921,8 +921,7 @@
}
if (!info->ioaddr || !info->type) {
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
@@ -952,8 +951,8 @@
if (inb(info->ioaddr + UART_LSR) == 0xff) {
spin_unlock_irqrestore(&info->slock, flags);
if (capable(CAP_SYS_ADMIN)) {
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ if (tty)
+ set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
} else
return -ENODEV;
@@ -991,14 +990,13 @@
(void) inb(info->ioaddr + UART_IIR);
(void) inb(info->ioaddr + UART_MSR);
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ clear_bit(TTY_IO_ERROR, &tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
- mxser_change_speed(info, NULL);
+ mxser_change_speed(tty, NULL);
info->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->slock, flags);
@@ -1009,8 +1007,9 @@
* This routine will shutdown a serial port; interrupts maybe disabled, and
* DTR is dropped if the hangup on close termio flag is on.
*/
-static void mxser_shutdown(struct mxser_port *info)
+static void mxser_shutdown(struct tty_struct *tty)
{
+ struct mxser_port *info = tty->driver_data;
unsigned long flags;
if (!(info->port.flags & ASYNC_INITIALIZED))
@@ -1035,7 +1034,7 @@
info->IER = 0;
outb(0x00, info->ioaddr + UART_IER);
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
+ if (tty->termios->c_cflag & HUPCL)
info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
outb(info->MCR, info->ioaddr + UART_MCR);
@@ -1051,8 +1050,7 @@
/* read data port to reset things */
(void) inb(info->ioaddr + UART_RX);
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ set_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags &= ~ASYNC_INITIALIZED;
@@ -1084,14 +1082,14 @@
return -ENODEV;
tty->driver_data = info;
- info->port.tty = tty;
+ tty_port_tty_set(&info->port, tty);
/*
* Start up serial port
*/
spin_lock_irqsave(&info->slock, flags);
info->port.count++;
spin_unlock_irqrestore(&info->slock, flags);
- retval = mxser_startup(info);
+ retval = mxser_startup(tty);
if (retval)
return retval;
@@ -1209,13 +1207,13 @@
break;
}
}
- mxser_shutdown(info);
+ mxser_shutdown(tty);
mxser_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
- info->port.tty = NULL;
+ tty_port_tty_set(&info->port, NULL);
if (info->port.blocked_open) {
if (info->port.close_delay)
schedule_timeout_interruptible(info->port.close_delay);
@@ -1337,12 +1335,13 @@
* friends of mxser_ioctl()
* ------------------------------------------------------------
*/
-static int mxser_get_serial_info(struct mxser_port *info,
+static int mxser_get_serial_info(struct tty_struct *tty,
struct serial_struct __user *retinfo)
{
+ struct mxser_port *info = tty->driver_data;
struct serial_struct tmp = {
.type = info->type,
- .line = info->port.tty->index,
+ .line = tty->index,
.port = info->ioaddr,
.irq = info->board->irq,
.flags = info->port.flags,
@@ -1357,9 +1356,10 @@
return 0;
}
-static int mxser_set_serial_info(struct mxser_port *info,
+static int mxser_set_serial_info(struct tty_struct *tty,
struct serial_struct __user *new_info)
{
+ struct mxser_port *info = tty->driver_data;
struct serial_struct new_serial;
speed_t baud;
unsigned long sl_flags;
@@ -1393,14 +1393,14 @@
(new_serial.flags & ASYNC_FLAGS));
info->port.close_delay = new_serial.close_delay * HZ / 100;
info->port.closing_wait = new_serial.closing_wait * HZ / 100;
- info->port.tty->low_latency =
- (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY)
+ ? 1 : 0;
if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
(new_serial.baud_base != info->baud_base ||
new_serial.custom_divisor !=
info->custom_divisor)) {
baud = new_serial.baud_base / new_serial.custom_divisor;
- tty_encode_baud_rate(info->port.tty, baud, baud);
+ tty_encode_baud_rate(tty, baud, baud);
}
}
@@ -1411,11 +1411,11 @@
if (info->port.flags & ASYNC_INITIALIZED) {
if (flags != (info->port.flags & ASYNC_SPD_MASK)) {
spin_lock_irqsave(&info->slock, sl_flags);
- mxser_change_speed(info, NULL);
+ mxser_change_speed(tty, NULL);
spin_unlock_irqrestore(&info->slock, sl_flags);
}
} else
- retval = mxser_startup(info);
+ retval = mxser_startup(tty);
return retval;
}
@@ -1461,7 +1461,7 @@
spin_lock_irqsave(&info->slock, flags);
status = inb(info->ioaddr + UART_MSR);
if (status & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(info, status);
+ mxser_check_modem_status(tty, info, status);
spin_unlock_irqrestore(&info->slock, flags);
return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
@@ -1606,6 +1606,7 @@
static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
{
struct mxser_port *port;
+ struct tty_struct *tty;
int result, status;
unsigned int i, j;
int ret = 0;
@@ -1643,12 +1644,14 @@
if (!port->ioaddr)
goto copy;
+
+ tty = tty_port_tty_get(&port->port);
- if (!port->port.tty || !port->port.tty->termios)
+ if (!tty || !tty->termios)
ms.cflag = port->normal_termios.c_cflag;
else
- ms.cflag = port->port.tty->termios->c_cflag;
-
+ ms.cflag = tty->termios->c_cflag;
+ tty_kref_put(tty);
status = inb(port->ioaddr + UART_MSR);
if (status & UART_MSR_DCD)
ms.dcd = 1;
@@ -1704,15 +1707,18 @@
me->up_txcnt[p] = port->mon_data.up_txcnt;
me->modem_status[p] =
port->mon_data.modem_status;
- me->baudrate[p] = tty_get_baud_rate(port->port.tty);
+ tty = tty_port_tty_get(&port->port);
- if (!port->port.tty || !port->port.tty->termios) {
+ if (!tty || !tty->termios) {
cflag = port->normal_termios.c_cflag;
iflag = port->normal_termios.c_iflag;
+ me->baudrate[p] = tty_termios_baud_rate(&port->normal_termios);
} else {
- cflag = port->port.tty->termios->c_cflag;
- iflag = port->port.tty->termios->c_iflag;
+ cflag = tty->termios->c_cflag;
+ iflag = tty->termios->c_iflag;
+ me->baudrate[p] = tty_get_baud_rate(tty);
}
+ tty_kref_put(tty);
me->databits[p] = cflag & CSIZE;
me->stopbits[p] = cflag & CSTOPB;
@@ -1822,12 +1828,12 @@
switch (cmd) {
case TIOCGSERIAL:
lock_kernel();
- retval = mxser_get_serial_info(info, argp);
+ retval = mxser_get_serial_info(tty, argp);
unlock_kernel();
return retval;
case TIOCSSERIAL:
lock_kernel();
- retval = mxser_set_serial_info(info, argp);
+ retval = mxser_set_serial_info(tty, argp);
unlock_kernel();
return retval;
case TIOCSERGETLSR: /* Get line status register */
@@ -1896,7 +1902,7 @@
lock_kernel();
status = mxser_get_msr(info->ioaddr, 1, tty->index);
- mxser_check_modem_status(info, status);
+ mxser_check_modem_status(tty, info, status);
mcr = inb(info->ioaddr + UART_MCR);
if (mcr & MOXA_MUST_MCR_XON_FLAG)
@@ -1909,7 +1915,7 @@
else
info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
- if (info->port.tty->hw_stopped)
+ if (tty->hw_stopped)
info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
else
info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
@@ -1958,7 +1964,7 @@
}
}
- if (info->port.tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios->c_cflag & CRTSCTS) {
info->MCR &= ~UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -1995,7 +2001,7 @@
}
}
- if (info->port.tty->termios->c_cflag & CRTSCTS) {
+ if (tty->termios->c_cflag & CRTSCTS) {
info->MCR |= UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -2040,7 +2046,7 @@
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
- mxser_change_speed(info, old_termios);
+ mxser_change_speed(tty, old_termios);
spin_unlock_irqrestore(&info->slock, flags);
if ((old_termios->c_cflag & CRTSCTS) &&
@@ -2138,10 +2144,10 @@
struct mxser_port *info = tty->driver_data;
mxser_flush_buffer(tty);
- mxser_shutdown(info);
+ mxser_shutdown(tty);
info->port.count = 0;
info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- info->port.tty = NULL;
+ tty_port_tty_set(&info->port, NULL);
wake_up_interruptible(&info->port.open_wait);
}
@@ -2164,9 +2170,9 @@
return 0;
}
-static void mxser_receive_chars(struct mxser_port *port, int *status)
+static void mxser_receive_chars(struct tty_struct *tty,
+ struct mxser_port *port, int *status)
{
- struct tty_struct *tty = port->port.tty;
unsigned char ch, gdl;
int ignored = 0;
int cnt = 0;
@@ -2174,9 +2180,8 @@
int max = 256;
recv_room = tty->receive_room;
- if ((recv_room == 0) && (!port->ldisc_stop_rx))
+ if (recv_room == 0 && !port->ldisc_stop_rx)
mxser_stoprx(tty);
-
if (port->board->chip_flag != MOXA_OTHER_UART) {
if (*status & UART_LSR_SPECIAL)
@@ -2253,7 +2258,7 @@
} while (*status & UART_LSR_DR);
end_intr:
- mxvar_log.rxcnt[port->port.tty->index] += cnt;
+ mxvar_log.rxcnt[tty->index] += cnt;
port->mon_data.rxcnt += cnt;
port->mon_data.up_rxcnt += cnt;
@@ -2267,14 +2272,14 @@
spin_lock(&port->slock);
}
-static void mxser_transmit_chars(struct mxser_port *port)
+static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
{
int count, cnt;
if (port->x_char) {
outb(port->x_char, port->ioaddr + UART_TX);
port->x_char = 0;
- mxvar_log.txcnt[port->port.tty->index]++;
+ mxvar_log.txcnt[tty->index]++;
port->mon_data.txcnt++;
port->mon_data.up_txcnt++;
port->icount.tx++;
@@ -2284,8 +2289,8 @@
if (port->port.xmit_buf == NULL)
return;
- if ((port->xmit_cnt <= 0) || port->port.tty->stopped ||
- (port->port.tty->hw_stopped &&
+ if (port->xmit_cnt <= 0 || tty->stopped ||
+ (tty->hw_stopped &&
(port->type != PORT_16550A) &&
(!port->board->chip_flag))) {
port->IER &= ~UART_IER_THRI;
@@ -2302,14 +2307,14 @@
if (--port->xmit_cnt <= 0)
break;
} while (--count > 0);
- mxvar_log.txcnt[port->port.tty->index] += (cnt - port->xmit_cnt);
+ mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
port->mon_data.txcnt += (cnt - port->xmit_cnt);
port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
port->icount.tx += (cnt - port->xmit_cnt);
- if (port->xmit_cnt < WAKEUP_CHARS)
- tty_wakeup(port->port.tty);
+ if (port->xmit_cnt < WAKEUP_CHARS && tty)
+ tty_wakeup(tty);
if (port->xmit_cnt <= 0) {
port->IER &= ~UART_IER_THRI;
@@ -2328,6 +2333,7 @@
int max, irqbits, bits, msr;
unsigned int int_cnt, pass_counter = 0;
int handled = IRQ_NONE;
+ struct tty_struct *tty;
for (i = 0; i < MXSER_BOARDS; i++)
if (dev_id == &mxser_boards[i]) {
@@ -2360,13 +2366,15 @@
if (iir & UART_IIR_NO_INT)
break;
iir &= MOXA_MUST_IIR_MASK;
- if (!port->port.tty ||
+ tty = tty_port_tty_get(&port->port);
+ if (!tty ||
(port->port.flags & ASYNC_CLOSING) ||
!(port->port.flags &
ASYNC_INITIALIZED)) {
status = inb(port->ioaddr + UART_LSR);
outb(0x27, port->ioaddr + UART_FCR);
inb(port->ioaddr + UART_MSR);
+ tty_kref_put(tty);
break;
}
@@ -2387,27 +2395,28 @@
iir == MOXA_MUST_IIR_RDA ||
iir == MOXA_MUST_IIR_RTO ||
iir == MOXA_MUST_IIR_LSR)
- mxser_receive_chars(port,
+ mxser_receive_chars(tty, port,
&status);
} else {
status &= port->read_status_mask;
if (status & UART_LSR_DR)
- mxser_receive_chars(port,
+ mxser_receive_chars(tty, port,
&status);
}
msr = inb(port->ioaddr + UART_MSR);
if (msr & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(port, msr);
+ mxser_check_modem_status(tty, port, msr);
if (port->board->chip_flag) {
if (iir == 0x02 && (status &
UART_LSR_THRE))
- mxser_transmit_chars(port);
+ mxser_transmit_chars(tty, port);
} else {
if (status & UART_LSR_THRE)
- mxser_transmit_chars(port);
+ mxser_transmit_chars(tty, port);
}
+ tty_kref_put(tty);
} while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
spin_unlock(&port->slock);
}
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 69ec639..bacb3e2 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -764,7 +764,7 @@
break;
default:
- error = n_tty_ioctl (tty, file, cmd, arg);
+ error = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
}
return error;
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index ae377aa..4a8215a 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -372,14 +372,8 @@
static void put_char(struct r3964_info *pInfo, unsigned char ch)
{
struct tty_struct *tty = pInfo->tty;
-
- if (tty == NULL)
- return;
-
/* FIXME: put_char should not be called from an IRQ */
- if (tty->ops->put_char) {
- tty->ops->put_char(tty, ch);
- }
+ tty_put_char(tty, ch);
pInfo->bcc ^= ch;
}
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 708c2b1..efbfe961 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -26,7 +26,7 @@
*
* 2002/03/18 Implemented n_tty_wakeup to send SIGIO POLL_OUTs to
* waiting writing processes-Sapan Bhatia <sapan@corewars.org>.
- * Also fixed a bug in BLOCKING mode where write_chan returns
+ * Also fixed a bug in BLOCKING mode where n_tty_write returns
* EAGAIN
*/
@@ -99,6 +99,7 @@
static void n_tty_set_room(struct tty_struct *tty)
{
+ /* tty->read_cnt is not read locked ? */
int left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
/*
@@ -121,6 +122,16 @@
}
}
+/**
+ * put_tty_queue - add character to tty
+ * @c: character
+ * @tty: tty device
+ *
+ * Add a character to the tty read_buf queue. This is done under the
+ * read_lock to serialize character addition and also to protect us
+ * against parallel reads or flushes
+ */
+
static void put_tty_queue(unsigned char c, struct tty_struct *tty)
{
unsigned long flags;
@@ -137,14 +148,11 @@
* check_unthrottle - allow new receive data
* @tty; tty device
*
- * Check whether to call the driver.unthrottle function.
- * We test the TTY_THROTTLED bit first so that it always
- * indicates the current state. The decision about whether
- * it is worth allowing more input has been taken by the caller.
+ * Check whether to call the driver unthrottle functions
+ *
* Can sleep, may be called under the atomic_read_lock mutex but
* this is not guaranteed.
*/
-
static void check_unthrottle(struct tty_struct *tty)
{
if (tty->count)
@@ -158,6 +166,8 @@
* Reset the read buffer counters, clear the flags,
* and make sure the driver is unthrottled. Called
* from n_tty_open() and n_tty_flush_buffer().
+ *
+ * Locking: tty_read_lock for read fields.
*/
static void reset_buffer_flags(struct tty_struct *tty)
{
@@ -181,7 +191,7 @@
* at hangup) or when the N_TTY line discipline internally has to
* clean the pending queue (for example some signals).
*
- * Locking: ctrl_lock
+ * Locking: ctrl_lock, read_lock.
*/
static void n_tty_flush_buffer(struct tty_struct *tty)
@@ -207,6 +217,8 @@
*
* Report the number of characters buffered to be delivered to user
* at this instant in time.
+ *
+ * Locking: read_lock
*/
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
@@ -346,7 +358,7 @@
* the simple cases normally found and helps to generate blocks of
* symbols for the console driver and thus improve performance.
*
- * Called from write_chan under the tty layer write lock. Relies
+ * Called from n_tty_write under the tty layer write lock. Relies
* on lock_kernel for the tty->column state.
*/
@@ -410,6 +422,8 @@
*
* Echo user input back onto the screen. This must be called only when
* L_ECHO(tty) is true. Called from the driver receive_buf path.
+ *
+ * Relies on BKL for tty column locking
*/
static void echo_char(unsigned char c, struct tty_struct *tty)
@@ -422,6 +436,12 @@
opost(c, tty);
}
+/**
+ * finsh_erasing - complete erase
+ * @tty: tty doing the erase
+ *
+ * Relies on BKL for tty column locking
+ */
static inline void finish_erasing(struct tty_struct *tty)
{
if (tty->erasing) {
@@ -439,6 +459,8 @@
* Perform erase and necessary output when an erase character is
* present in the stream from the driver layer. Handles the complexities
* of UTF-8 multibyte symbols.
+ *
+ * Locking: read_lock for tty buffers, BKL for column/erasing state
*/
static void eraser(unsigned char c, struct tty_struct *tty)
@@ -447,6 +469,7 @@
int head, seen_alnums, cnt;
unsigned long flags;
+ /* FIXME: locking needed ? */
if (tty->read_head == tty->canon_head) {
/* opost('\a', tty); */ /* what do you think? */
return;
@@ -481,6 +504,7 @@
}
seen_alnums = 0;
+ /* FIXME: Locking ?? */
while (tty->read_head != tty->canon_head) {
head = tty->read_head;
@@ -583,6 +607,8 @@
* may caus terminal flushing to take place according to the termios
* settings and character used. Called from the driver receive_buf
* path so serialized.
+ *
+ * Locking: ctrl_lock, read_lock (both via flush buffer)
*/
static inline void isig(int sig, struct tty_struct *tty, int flush)
@@ -1007,12 +1033,26 @@
* and is protected from re-entry by the tty layer. The user is
* guaranteed that this function will not be re-entered or in progress
* when the ldisc is closed.
+ *
+ * Locking: Caller holds tty->termios_mutex
*/
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
- if (!tty)
- return;
+ int canon_change = 1;
+ BUG_ON(!tty);
+
+ if (old)
+ canon_change = (old->c_lflag ^ tty->termios->c_lflag) & ICANON;
+ if (canon_change) {
+ memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ tty->canon_head = tty->read_tail;
+ tty->canon_data = 0;
+ tty->erasing = 0;
+ }
+
+ if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+ wake_up_interruptible(&tty->read_wait);
tty->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
@@ -1143,7 +1183,7 @@
* @b: user data
* @nr: size of data
*
- * Helper function to speed up read_chan. It is only called when
+ * Helper function to speed up n_tty_read. It is only called when
* ICANON is off; it copies characters straight from the tty queue to
* user space directly. It can be profitably called twice; once to
* drain the space from the tail pointer to the (physical) end of the
@@ -1210,7 +1250,7 @@
if (file->f_op->write != redirected_tty_write &&
current->signal->tty == tty) {
if (!tty->pgrp)
- printk(KERN_ERR "read_chan: no tty->pgrp!\n");
+ printk(KERN_ERR "n_tty_read: no tty->pgrp!\n");
else if (task_pgrp(current) != tty->pgrp) {
if (is_ignored(SIGTTIN) ||
is_current_pgrp_orphaned())
@@ -1225,7 +1265,7 @@
/**
- * read_chan - read function for tty
+ * n_tty_read - read function for tty
* @tty: tty device
* @file: file object
* @buf: userspace buffer pointer
@@ -1239,7 +1279,7 @@
* This code must be sure never to sleep through a hangup.
*/
-static ssize_t read_chan(struct tty_struct *tty, struct file *file,
+static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr)
{
unsigned char __user *b = buf;
@@ -1254,10 +1294,7 @@
do_it_again:
- if (!tty->read_buf) {
- printk(KERN_ERR "n_tty_read_chan: read_buf == NULL?!?\n");
- return -EIO;
- }
+ BUG_ON(!tty->read_buf);
c = job_control(tty, file);
if (c < 0)
@@ -1444,7 +1481,7 @@
}
/**
- * write_chan - write function for tty
+ * n_tty_write - write function for tty
* @tty: tty device
* @file: file object
* @buf: userspace buffer pointer
@@ -1458,7 +1495,7 @@
* This code must be sure never to sleep through a hangup.
*/
-static ssize_t write_chan(struct tty_struct *tty, struct file *file,
+static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
const unsigned char *buf, size_t nr)
{
const unsigned char *b = buf;
@@ -1532,7 +1569,7 @@
}
/**
- * normal_poll - poll method for N_TTY
+ * n_tty_poll - poll method for N_TTY
* @tty: terminal device
* @file: file accessing it
* @wait: poll table
@@ -1545,7 +1582,7 @@
* Called without the kernel lock held - fine
*/
-static unsigned int normal_poll(struct tty_struct *tty, struct file *file,
+static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
poll_table *wait)
{
unsigned int mask = 0;
@@ -1573,6 +1610,44 @@
return mask;
}
+static unsigned long inq_canon(struct tty_struct *tty)
+{
+ int nr, head, tail;
+
+ if (!tty->canon_data)
+ return 0;
+ head = tty->canon_head;
+ tail = tty->read_tail;
+ nr = (head - tail) & (N_TTY_BUF_SIZE-1);
+ /* Skip EOF-chars.. */
+ while (head != tail) {
+ if (test_bit(tail, tty->read_flags) &&
+ tty->read_buf[tail] == __DISABLED_CHAR)
+ nr--;
+ tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+ }
+ return nr;
+}
+
+static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int retval;
+
+ switch (cmd) {
+ case TIOCOUTQ:
+ return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
+ case TIOCINQ:
+ /* FIXME: Locking */
+ retval = tty->read_cnt;
+ if (L_ICANON(tty))
+ retval = inq_canon(tty);
+ return put_user(retval, (unsigned int __user *) arg);
+ default:
+ return n_tty_ioctl_helper(tty, file, cmd, arg);
+ }
+}
+
struct tty_ldisc_ops tty_ldisc_N_TTY = {
.magic = TTY_LDISC_MAGIC,
.name = "n_tty",
@@ -1580,11 +1655,11 @@
.close = n_tty_close,
.flush_buffer = n_tty_flush_buffer,
.chars_in_buffer = n_tty_chars_in_buffer,
- .read = read_chan,
- .write = write_chan,
+ .read = n_tty_read,
+ .write = n_tty_write,
.ioctl = n_tty_ioctl,
.set_termios = n_tty_set_termios,
- .poll = normal_poll,
+ .poll = n_tty_poll,
.receive_buf = n_tty_receive_buf,
.write_wakeup = n_tty_write_wakeup
};
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 66a0f93..9a34a19 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1599,7 +1599,10 @@
return 0;
}
-/* Called when the userspace process close the tty, /dev/noz*. */
+/* Called when the userspace process close the tty, /dev/noz*. Also
+ called immediately if ntty_open fails in which case tty->driver_data
+ will be NULL an we exit by the first return */
+
static void ntty_close(struct tty_struct *tty, struct file *file)
{
struct nozomi *dc = get_dc_by_tty(tty);
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 3a23e76..569f2f7 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -276,6 +276,7 @@
struct ipw_tty *tty = linux_tty->driver_data;
int room;
+ /* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
@@ -397,6 +398,7 @@
static int ipw_tiocmget(struct tty_struct *linux_tty, struct file *file)
{
struct ipw_tty *tty = linux_tty->driver_data;
+ /* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
@@ -412,6 +414,7 @@
unsigned int set, unsigned int clear)
{
struct ipw_tty *tty = linux_tty->driver_data;
+ /* FIXME: Exactly how is the tty object locked here .. */
if (!tty)
return -ENODEV;
@@ -433,6 +436,8 @@
if (!tty->open_count)
return -EINVAL;
+ /* FIXME: Exactly how is the tty object locked here .. */
+
switch (cmd) {
case TIOCGSERIAL:
return ipwireless_get_serial_info(tty, (void __user *) arg);
@@ -467,13 +472,6 @@
}
return 0;
- case TCGETS:
- case TCGETA:
- return n_tty_ioctl(linux_tty, file, cmd, arg);
-
- case TCFLSH:
- return n_tty_ioctl(linux_tty, file, cmd, arg);
-
case FIONREAD:
{
int val = 0;
@@ -482,10 +480,11 @@
return -EFAULT;
}
return 0;
+ case TCFLSH:
+ return tty_perform_flush(linux_tty, arg);
}
}
-
- return -ENOIOCTLCMD;
+ return tty_mode_ioctl(linux_tty, file, cmd , arg);
}
static int add_tty(dev_node_t *nodesp, int j,
@@ -588,6 +587,8 @@
tty_hangup(ttyj->linux_tty);
/* Wait till the tty_hangup has completed */
flush_scheduled_work();
+ /* FIXME: Exactly how is the tty object locked here
+ against a parallel ioctl etc */
mutex_lock(&ttyj->ipw_tty_mutex);
}
while (ttyj->open_count)
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 76b2793..6d45827 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -8,10 +8,12 @@
* Added TTY_DO_WRITE_WAKEUP to enable n_tty to send POLL_OUT to
* waiting writers -- Sapan Bhatia <sapan@corewars.org>
*
- *
+ * When reading this code see also fs/devpts. In particular note that the
+ * driver_data field is used by the devpts side as a binding to the devpts
+ * inode.
*/
-#include <linux/module.h> /* For EXPORT_SYMBOL */
+#include <linux/module.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -23,26 +25,25 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/sysctl.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
+#include <linux/device.h>
+#include <linux/uaccess.h>
#include <linux/bitops.h>
#include <linux/devpts_fs.h>
+#include <asm/system.h>
+
/* These are global because they are accessed in tty_io.c */
#ifdef CONFIG_UNIX98_PTYS
struct tty_driver *ptm_driver;
static struct tty_driver *pts_driver;
#endif
-static void pty_close(struct tty_struct * tty, struct file * filp)
+static void pty_close(struct tty_struct *tty, struct file *filp)
{
- if (!tty)
- return;
- if (tty->driver->subtype == PTY_TYPE_MASTER) {
- if (tty->count > 1)
- printk("master pty_close: count = %d!!\n", tty->count);
- } else {
+ BUG_ON(!tty);
+ if (tty->driver->subtype == PTY_TYPE_MASTER)
+ WARN_ON(tty->count > 1);
+ else {
if (tty->count > 2)
return;
}
@@ -59,7 +60,7 @@
set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver)
- devpts_pty_kill(tty->index);
+ devpts_pty_kill(tty->link);
#endif
tty_vhangup(tty->link);
}
@@ -69,13 +70,13 @@
* The unthrottle routine is called by the line discipline to signal
* that it can receive more characters. For PTY's, the TTY_THROTTLED
* flag is always set, to force the line discipline to always call the
- * unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE
+ * unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE
* characters in the queue. This is necessary since each time this
* happens, we need to wake up any sleeping processes that could be
* (1) trying to send data to the pty, or (2) waiting in wait_until_sent()
* for the pty buffer to be drained.
*/
-static void pty_unthrottle(struct tty_struct * tty)
+static void pty_unthrottle(struct tty_struct *tty)
{
struct tty_struct *o_tty = tty->link;
@@ -87,7 +88,7 @@
}
/*
- * WSH 05/24/97: modified to
+ * WSH 05/24/97: modified to
* (1) use space in tty->flip instead of a shared temp buffer
* The flip buffers aren't being used for a pty, so there's lots
* of space available. The buffer is protected by a per-pty
@@ -100,7 +101,8 @@
* not our partners. We can't just take the other one blindly without
* risking deadlocks.
*/
-static int pty_write(struct tty_struct * tty, const unsigned char *buf, int count)
+static int pty_write(struct tty_struct *tty, const unsigned char *buf,
+ int count)
{
struct tty_struct *to = tty->link;
int c;
@@ -112,7 +114,7 @@
if (c > count)
c = count;
to->ldisc.ops->receive_buf(to, buf, NULL, c);
-
+
return c;
}
@@ -128,17 +130,17 @@
/*
* WSH 05/24/97: Modified for asymmetric MASTER/SLAVE behavior
- * The chars_in_buffer() value is used by the ldisc select() function
+ * The chars_in_buffer() value is used by the ldisc select() function
* to hold off writing when chars_in_buffer > WAKEUP_CHARS (== 256).
* The pty driver chars_in_buffer() Master/Slave must behave differently:
*
* The Master side needs to allow typed-ahead commands to accumulate
* while being canonicalized, so we report "our buffer" as empty until
* some threshold is reached, and then report the count. (Any count >
- * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
- * the count returned must be 0 if no canonical data is available to be
+ * WAKEUP_CHARS is regarded by select() as "full".) To avoid deadlock
+ * the count returned must be 0 if no canonical data is available to be
* read. (The N_TTY ldisc.chars_in_buffer now knows this.)
- *
+ *
* The Slave side passes all characters in raw mode to the Master side's
* buffer where they can be read immediately, so in this case we can
* return the true count in the buffer.
@@ -155,21 +157,22 @@
/* The ldisc must report 0 if no characters available to be read */
count = to->ldisc.ops->chars_in_buffer(to);
- if (tty->driver->subtype == PTY_TYPE_SLAVE) return count;
+ if (tty->driver->subtype == PTY_TYPE_SLAVE)
+ return count;
- /* Master side driver ... if the other side's read buffer is less than
+ /* Master side driver ... if the other side's read buffer is less than
* half full, return 0 to allow writers to proceed; otherwise return
- * the count. This leaves a comfortable margin to avoid overflow,
+ * the count. This leaves a comfortable margin to avoid overflow,
* and still allows half a buffer's worth of typed-ahead commands.
*/
- return ((count < N_TTY_BUF_SIZE/2) ? 0 : count);
+ return (count < N_TTY_BUF_SIZE/2) ? 0 : count;
}
/* Set the lock flag on a pty */
-static int pty_set_lock(struct tty_struct *tty, int __user * arg)
+static int pty_set_lock(struct tty_struct *tty, int __user *arg)
{
int val;
- if (get_user(val,arg))
+ if (get_user(val, arg))
return -EFAULT;
if (val)
set_bit(TTY_PTY_LOCK, &tty->flags);
@@ -182,13 +185,13 @@
{
struct tty_struct *to = tty->link;
unsigned long flags;
-
+
if (!to)
return;
-
+
if (to->ldisc.ops->flush_buffer)
to->ldisc.ops->flush_buffer(to);
-
+
if (to->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
@@ -197,7 +200,7 @@
}
}
-static int pty_open(struct tty_struct *tty, struct file * filp)
+static int pty_open(struct tty_struct *tty, struct file *filp)
{
int retval = -ENODEV;
@@ -220,13 +223,65 @@
return retval;
}
-static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void pty_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
- tty->termios->c_cflag &= ~(CSIZE | PARENB);
- tty->termios->c_cflag |= (CS8 | CREAD);
+ tty->termios->c_cflag &= ~(CSIZE | PARENB);
+ tty->termios->c_cflag |= (CS8 | CREAD);
}
+static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct tty_struct *o_tty;
+ int idx = tty->index;
+ int retval;
+
+ o_tty = alloc_tty_struct();
+ if (!o_tty)
+ return -ENOMEM;
+ if (!try_module_get(driver->other->owner)) {
+ /* This cannot in fact currently happen */
+ free_tty_struct(o_tty);
+ return -ENOMEM;
+ }
+ initialize_tty_struct(o_tty, driver->other, idx);
+
+ /* We always use new tty termios data so we can do this
+ the easy way .. */
+ retval = tty_init_termios(tty);
+ if (retval)
+ goto free_mem_out;
+
+ retval = tty_init_termios(o_tty);
+ if (retval) {
+ tty_free_termios(tty);
+ goto free_mem_out;
+ }
+
+ /*
+ * Everything allocated ... set up the o_tty structure.
+ */
+ driver->other->ttys[idx] = o_tty;
+ tty_driver_kref_get(driver->other);
+ if (driver->subtype == PTY_TYPE_MASTER)
+ o_tty->count++;
+ /* Establish the links in both directions */
+ tty->link = o_tty;
+ o_tty->link = tty;
+
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return 0;
+free_mem_out:
+ module_put(o_tty->driver->owner);
+ free_tty_struct(o_tty);
+ return -ENOMEM;
+}
+
+
static const struct tty_operations pty_ops = {
+ .install = pty_install,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -329,8 +384,11 @@
* Otherwise one can eat up all kernel memory by opening /dev/ptmx repeatedly.
*/
int pty_limit = NR_UNIX98_PTY_DEFAULT;
-static int pty_limit_min = 0;
+static int pty_limit_min;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
+static int pty_count;
+
+static struct cdev ptmx_cdev;
static struct ctl_table pty_table[] = {
{
@@ -348,6 +406,7 @@
.procname = "nr",
.maxlen = sizeof(int),
.mode = 0444,
+ .data = &pty_count,
.proc_handler = &proc_dointvec,
}, {
.ctl_name = 0
@@ -388,7 +447,111 @@
return -ENOIOCTLCMD;
}
-static const struct tty_operations pty_unix98_ops = {
+/**
+ * ptm_unix98_lookup - find a pty master
+ * @driver: ptm driver
+ * @idx: tty index
+ *
+ * Look up a pty master device. Called under the tty_mutex for now.
+ * This provides our locking.
+ */
+
+static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
+ struct inode *ptm_inode, int idx)
+{
+ struct tty_struct *tty = devpts_get_tty(ptm_inode, idx);
+ if (tty)
+ tty = tty->link;
+ return tty;
+}
+
+/**
+ * pts_unix98_lookup - find a pty slave
+ * @driver: pts driver
+ * @idx: tty index
+ *
+ * Look up a pty master device. Called under the tty_mutex for now.
+ * This provides our locking.
+ */
+
+static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
+ struct inode *pts_inode, int idx)
+{
+ struct tty_struct *tty = devpts_get_tty(pts_inode, idx);
+ /* Master must be open before slave */
+ if (!tty)
+ return ERR_PTR(-EIO);
+ return tty;
+}
+
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+ /* We have our own method as we don't use the tty index */
+ kfree(tty->termios);
+}
+
+/* We have no need to install and remove our tty objects as devpts does all
+ the work for us */
+
+static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct tty_struct *o_tty;
+ int idx = tty->index;
+
+ o_tty = alloc_tty_struct();
+ if (!o_tty)
+ return -ENOMEM;
+ if (!try_module_get(driver->other->owner)) {
+ /* This cannot in fact currently happen */
+ free_tty_struct(o_tty);
+ return -ENOMEM;
+ }
+ initialize_tty_struct(o_tty, driver->other, idx);
+
+ tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
+ if (tty->termios == NULL)
+ goto free_mem_out;
+ *tty->termios = driver->init_termios;
+ tty->termios_locked = tty->termios + 1;
+
+ o_tty->termios = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
+ if (o_tty->termios == NULL)
+ goto free_mem_out;
+ *o_tty->termios = driver->other->init_termios;
+ o_tty->termios_locked = o_tty->termios + 1;
+
+ tty_driver_kref_get(driver->other);
+ if (driver->subtype == PTY_TYPE_MASTER)
+ o_tty->count++;
+ /* Establish the links in both directions */
+ tty->link = o_tty;
+ o_tty->link = tty;
+ /*
+ * All structures have been allocated, so now we install them.
+ * Failures after this point use release_tty to clean up, so
+ * there's no need to null out the local pointers.
+ */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ pty_count++;
+ return 0;
+free_mem_out:
+ kfree(o_tty->termios);
+ module_put(o_tty->driver->owner);
+ free_tty_struct(o_tty);
+ kfree(tty->termios);
+ return -ENOMEM;
+}
+
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
+{
+ pty_count--;
+}
+
+static const struct tty_operations ptm_unix98_ops = {
+ .lookup = ptm_unix98_lookup,
+ .install = pty_unix98_install,
+ .remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
@@ -397,9 +560,89 @@
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
- .ioctl = pty_unix98_ioctl
+ .ioctl = pty_unix98_ioctl,
+ .shutdown = pty_unix98_shutdown
};
+static const struct tty_operations pty_unix98_ops = {
+ .lookup = pts_unix98_lookup,
+ .install = pty_unix98_install,
+ .remove = pty_unix98_remove,
+ .open = pty_open,
+ .close = pty_close,
+ .write = pty_write,
+ .write_room = pty_write_room,
+ .flush_buffer = pty_flush_buffer,
+ .chars_in_buffer = pty_chars_in_buffer,
+ .unthrottle = pty_unthrottle,
+ .set_termios = pty_set_termios,
+ .shutdown = pty_unix98_shutdown
+};
+
+/**
+ * ptmx_open - open a unix 98 pty master
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * Allocate a unix98 pty master device from the ptmx driver.
+ *
+ * Locking: tty_mutex protects the init_dev work. tty->count should
+ * protect the rest.
+ * allocated_ptys_lock handles the list of free pty numbers
+ */
+
+static int __ptmx_open(struct inode *inode, struct file *filp)
+{
+ struct tty_struct *tty;
+ int retval;
+ int index;
+
+ nonseekable_open(inode, filp);
+
+ /* find a device that is not in use. */
+ index = devpts_new_index(inode);
+ if (index < 0)
+ return index;
+
+ mutex_lock(&tty_mutex);
+ tty = tty_init_dev(ptm_driver, index, 1);
+ mutex_unlock(&tty_mutex);
+
+ if (IS_ERR(tty)) {
+ retval = PTR_ERR(tty);
+ goto out;
+ }
+
+ set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
+ filp->private_data = tty;
+ file_move(filp, &tty->tty_files);
+
+ retval = devpts_pty_new(inode, tty->link);
+ if (retval)
+ goto out1;
+
+ retval = ptm_driver->ops->open(tty, filp);
+ if (!retval)
+ return 0;
+out1:
+ tty_release_dev(filp);
+ return retval;
+out:
+ devpts_kill_index(inode, index);
+ return retval;
+}
+
+static int ptmx_open(struct inode *inode, struct file *filp)
+{
+ int ret;
+
+ lock_kernel();
+ ret = __ptmx_open(inode, filp);
+ unlock_kernel();
+ return ret;
+}
+
+static struct file_operations ptmx_fops;
static void __init unix98_pty_init(void)
{
@@ -427,7 +670,7 @@
ptm_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
ptm_driver->other = pts_driver;
- tty_set_operations(ptm_driver, &pty_unix98_ops);
+ tty_set_operations(ptm_driver, &ptm_unix98_ops);
pts_driver->owner = THIS_MODULE;
pts_driver->driver_name = "pty_slave";
@@ -443,16 +686,26 @@
pts_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM;
pts_driver->other = ptm_driver;
- tty_set_operations(pts_driver, &pty_ops);
-
+ tty_set_operations(pts_driver, &pty_unix98_ops);
+
if (tty_register_driver(ptm_driver))
panic("Couldn't register Unix98 ptm driver");
if (tty_register_driver(pts_driver))
panic("Couldn't register Unix98 pts driver");
- pty_table[1].data = &ptm_driver->refcount;
register_sysctl_table(pty_root_table);
+
+ /* Now create the /dev/ptmx special device */
+ tty_default_fops(&ptmx_fops);
+ ptmx_fops.open = ptmx_open;
+
+ cdev_init(&ptmx_cdev, &ptmx_fops);
+ if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
+ register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
+ panic("Couldn't register /dev/ptmx driver\n");
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
}
+
#else
static inline void unix98_pty_init(void) { }
#endif
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 19db1eb..8b8f07a 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -405,9 +405,9 @@
static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
static int stl_brdinit(struct stlbrd *brdp);
-static int stl_getportstats(struct stlport *portp, comstats_t __user *cp);
+static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp);
static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp);
-static int stl_waitcarrier(struct stlport *portp, struct file *filp);
+static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp, struct file *filp);
/*
* CD1400 uart specific handling functions.
@@ -612,8 +612,9 @@
static void stl_cd_change(struct stlport *portp)
{
unsigned int oldsigs = portp->sigs;
+ struct tty_struct *tty = tty_port_tty_get(&portp->port);
- if (!portp->port.tty)
+ if (!tty)
return;
portp->sigs = stl_getsignals(portp);
@@ -623,7 +624,8 @@
if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
if (portp->port.flags & ASYNC_CHECK_CD)
- tty_hangup(portp->port.tty);
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/*
@@ -734,7 +736,7 @@
* On the first open of the device setup the port hardware, and
* initialize the per port data structure.
*/
- portp->port.tty = tty;
+ tty_port_tty_set(&portp->port, tty);
tty->driver_data = portp;
portp->port.count++;
@@ -774,7 +776,7 @@
* then also we might have to wait for carrier.
*/
if (!(filp->f_flags & O_NONBLOCK))
- if ((rc = stl_waitcarrier(portp, filp)) != 0)
+ if ((rc = stl_waitcarrier(tty, portp, filp)) != 0)
return rc;
portp->port.flags |= ASYNC_NORMAL_ACTIVE;
@@ -789,7 +791,8 @@
* maybe because if we are clocal then we don't need to wait...
*/
-static int stl_waitcarrier(struct stlport *portp, struct file *filp)
+static int stl_waitcarrier(struct tty_struct *tty, struct stlport *portp,
+ struct file *filp)
{
unsigned long flags;
int rc, doclocal;
@@ -801,7 +804,7 @@
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->port.tty->termios->c_cflag & CLOCAL)
+ if (tty->termios->c_cflag & CLOCAL)
doclocal++;
portp->openwaitcnt++;
@@ -846,8 +849,6 @@
pr_debug("stl_flushbuffer(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -865,8 +866,6 @@
pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -949,7 +948,7 @@
tty_ldisc_flush(tty);
tty->closing = 0;
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
if (portp->openwaitcnt) {
if (portp->close_delay)
@@ -1033,8 +1032,6 @@
pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == NULL)
- return -EINVAL;
portp = tty->driver_data;
if (portp == NULL)
return -EINVAL;
@@ -1070,8 +1067,6 @@
pr_debug("stl_flushchars(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1090,8 +1085,6 @@
pr_debug("stl_writeroom(tty=%p)\n", tty);
- if (tty == NULL)
- return 0;
portp = tty->driver_data;
if (portp == NULL)
return 0;
@@ -1122,8 +1115,6 @@
pr_debug("stl_charsinbuffer(tty=%p)\n", tty);
- if (tty == NULL)
- return 0;
portp = tty->driver_data;
if (portp == NULL)
return 0;
@@ -1183,8 +1174,9 @@
* just quietly ignore any requests to change irq, etc.
*/
-static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp)
+static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
{
+ struct stlport * portp = tty->driver_data;
struct serial_struct sio;
pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp);
@@ -1205,7 +1197,7 @@
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- stl_setport(portp, portp->port.tty->termios);
+ stl_setport(portp, tty->termios);
return 0;
}
@@ -1215,8 +1207,6 @@
{
struct stlport *portp;
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
@@ -1232,8 +1222,6 @@
struct stlport *portp;
int rts = -1, dtr = -1;
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
@@ -1262,8 +1250,6 @@
pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd,
arg);
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
@@ -1282,10 +1268,10 @@
rc = stl_getserial(portp, argp);
break;
case TIOCSSERIAL:
- rc = stl_setserial(portp, argp);
+ rc = stl_setserial(tty, argp);
break;
case COM_GETPORTSTATS:
- rc = stl_getportstats(portp, argp);
+ rc = stl_getportstats(tty, portp, argp);
break;
case COM_CLRPORTSTATS:
rc = stl_clrportstats(portp, argp);
@@ -1317,8 +1303,6 @@
pr_debug("stl_start(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1334,8 +1318,6 @@
pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1369,8 +1351,6 @@
pr_debug("stl_throttle(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1389,8 +1369,6 @@
pr_debug("stl_unthrottle(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1410,8 +1388,6 @@
pr_debug("stl_stop(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1432,8 +1408,6 @@
pr_debug("stl_hangup(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1452,7 +1426,7 @@
portp->tx.head = NULL;
portp->tx.tail = NULL;
}
- portp->port.tty = NULL;
+ tty_port_tty_set(&portp->port, NULL);
portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
portp->port.count = 0;
wake_up_interruptible(&portp->port.open_wait);
@@ -1466,8 +1440,6 @@
pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
- if (tty == NULL)
- return -EINVAL;
portp = tty->driver_data;
if (portp == NULL)
return -EINVAL;
@@ -1484,8 +1456,6 @@
pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
@@ -1805,7 +1775,7 @@
"(size=%Zd)\n", sizeof(struct stlport));
break;
}
-
+ tty_port_init(&portp->port);
portp->magic = STL_PORTMAGIC;
portp->portnr = i;
portp->brdnr = panelp->brdnr;
@@ -1832,6 +1802,7 @@
struct stlpanel *panelp;
struct stlport *portp;
unsigned int j, k;
+ struct tty_struct *tty;
for (j = 0; j < STL_MAXPANELS; j++) {
panelp = brdp->panels[j];
@@ -1841,8 +1812,11 @@
portp = panelp->ports[k];
if (portp == NULL)
continue;
- if (portp->port.tty != NULL)
- stl_hangup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty != NULL) {
+ stl_hangup(tty);
+ tty_kref_put(tty);
+ }
kfree(portp->tx.buf);
kfree(portp);
}
@@ -2498,7 +2472,7 @@
* what port to get stats for (used through board control device).
*/
-static int stl_getportstats(struct stlport *portp, comstats_t __user *cp)
+static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp)
{
comstats_t stl_comstats;
unsigned char *head, *tail;
@@ -2525,18 +2499,17 @@
portp->stats.rxbuffered = 0;
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->port.tty != NULL)
- if (portp->port.tty->driver_data == portp) {
- portp->stats.ttystate = portp->port.tty->flags;
- /* No longer available as a statistic */
- portp->stats.rxbuffered = 1; /*portp->port.tty->flip.count; */
- if (portp->port.tty->termios != NULL) {
- portp->stats.cflags = portp->port.tty->termios->c_cflag;
- portp->stats.iflags = portp->port.tty->termios->c_iflag;
- portp->stats.oflags = portp->port.tty->termios->c_oflag;
- portp->stats.lflags = portp->port.tty->termios->c_lflag;
- }
+ if (tty != NULL && portp->port.tty == tty) {
+ portp->stats.ttystate = tty->flags;
+ /* No longer available as a statistic */
+ portp->stats.rxbuffered = 1; /*tty->flip.count; */
+ if (tty->termios != NULL) {
+ portp->stats.cflags = tty->termios->c_cflag;
+ portp->stats.iflags = tty->termios->c_iflag;
+ portp->stats.oflags = tty->termios->c_oflag;
+ portp->stats.lflags = tty->termios->c_lflag;
}
+ }
spin_unlock_irqrestore(&stallion_lock, flags);
head = portp->tx.head;
@@ -2640,7 +2613,7 @@
switch (cmd) {
case COM_GETPORTSTATS:
- rc = stl_getportstats(NULL, argp);
+ rc = stl_getportstats(NULL, NULL, argp);
break;
case COM_CLRPORTSTATS:
rc = stl_clrportstats(NULL, argp);
@@ -3243,7 +3216,7 @@
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -3288,6 +3261,7 @@
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -3305,7 +3279,7 @@
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -3325,6 +3299,7 @@
}
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -3478,6 +3453,7 @@
int len, stlen;
char *head, *tail;
unsigned char ioack, srer;
+ struct tty_struct *tty;
pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
@@ -3504,8 +3480,11 @@
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->port.tty)
- tty_wakeup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
if (len == 0) {
@@ -3569,7 +3548,7 @@
return;
}
portp = panelp->ports[(ioack >> 3)];
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
outb((RDCR + portp->uartaddr), ioaddr);
@@ -3633,10 +3612,12 @@
}
} else {
printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
+ tty_kref_put(tty);
return;
}
stl_rxalldone:
+ tty_kref_put(tty);
outb((EOSRR + portp->uartaddr), ioaddr);
outb(0, (ioaddr + EREG_DATA));
}
@@ -4175,7 +4156,7 @@
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -4226,6 +4207,7 @@
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -4244,7 +4226,7 @@
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
@@ -4269,6 +4251,7 @@
}
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -4408,6 +4391,7 @@
static void stl_sc26198txisr(struct stlport *portp)
{
+ struct tty_struct *tty;
unsigned int ioaddr;
unsigned char mr0;
int len, stlen;
@@ -4422,8 +4406,11 @@
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->port.tty)
- tty_wakeup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
if (len == 0) {
@@ -4476,7 +4463,7 @@
pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
ioaddr = portp->ioaddr;
outb(GIBCR, (ioaddr + XP_ADDR));
len = inb(ioaddr + XP_DATA) + 1;
@@ -4515,6 +4502,7 @@
stl_sc26198txunflow(portp, tty);
}
}
+ tty_kref_put(tty);
}
/*****************************************************************************/
@@ -4528,7 +4516,7 @@
struct tty_struct *tty;
unsigned int ioaddr;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
ioaddr = portp->ioaddr;
if (status & SR_RXPARITY)
@@ -4566,6 +4554,7 @@
if (status == 0)
portp->stats.rxtotal++;
}
+ tty_kref_put(tty);
}
/*****************************************************************************/
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index c385206..5b8d7a1 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2504,7 +2504,7 @@
del_timer(&board->timer);
if (pdev) {
#ifdef CONFIG_PCI
- pci_iounmap(pdev, board->base);
+ pci_iounmap(pdev, board->base2);
pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2);
#endif
} else {
@@ -2703,7 +2703,7 @@
return 0;
err_unmap:
- pci_iounmap(pdev, board->base);
+ pci_iounmap(pdev, board->base2);
err_reg:
pci_release_region(pdev, reg);
err_flag:
diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c
index 3582f43..5787249 100644
--- a/drivers/char/tty_audit.c
+++ b/drivers/char/tty_audit.c
@@ -93,7 +93,7 @@
get_task_comm(name, tsk);
audit_log_untrustedstring(ab, name);
audit_log_format(ab, " data=");
- audit_log_n_untrustedstring(ab, buf->data, buf->valid);
+ audit_log_n_hex(ab, buf->data, buf->valid);
audit_log_end(ab);
}
buf->valid = 0;
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
new file mode 100644
index 0000000..810ee25
--- /dev/null
+++ b/drivers/char/tty_buffer.c
@@ -0,0 +1,511 @@
+/*
+ * Tty buffer allocation management
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+/**
+ * tty_buffer_free_all - free buffers used by a tty
+ * @tty: tty to free from
+ *
+ * Remove all the buffers pending on a tty whether queued with data
+ * or in the free ring. Must be called when the tty is no longer in use
+ *
+ * Locking: none
+ */
+
+void tty_buffer_free_all(struct tty_struct *tty)
+{
+ struct tty_buffer *thead;
+ while ((thead = tty->buf.head) != NULL) {
+ tty->buf.head = thead->next;
+ kfree(thead);
+ }
+ while ((thead = tty->buf.free) != NULL) {
+ tty->buf.free = thead->next;
+ kfree(thead);
+ }
+ tty->buf.tail = NULL;
+ tty->buf.memory_used = 0;
+}
+
+/**
+ * tty_buffer_alloc - allocate a tty buffer
+ * @tty: tty device
+ * @size: desired size (characters)
+ *
+ * Allocate a new tty buffer to hold the desired number of characters.
+ * Return NULL if out of memory or the allocation would exceed the
+ * per device queue
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer *p;
+
+ if (tty->buf.memory_used + size > 65536)
+ return NULL;
+ p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
+ if (p == NULL)
+ return NULL;
+ p->used = 0;
+ p->size = size;
+ p->next = NULL;
+ p->commit = 0;
+ p->read = 0;
+ p->char_buf_ptr = (char *)(p->data);
+ p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
+ tty->buf.memory_used += size;
+ return p;
+}
+
+/**
+ * tty_buffer_free - free a tty buffer
+ * @tty: tty owning the buffer
+ * @b: the buffer to free
+ *
+ * Free a tty buffer, or add it to the free list according to our
+ * internal strategy
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+{
+ /* Dumb strategy for now - should keep some stats */
+ tty->buf.memory_used -= b->size;
+ WARN_ON(tty->buf.memory_used < 0);
+
+ if (b->size >= 512)
+ kfree(b);
+ else {
+ b->next = tty->buf.free;
+ tty->buf.free = b;
+ }
+}
+
+/**
+ * __tty_buffer_flush - flush full tty buffers
+ * @tty: tty to flush
+ *
+ * flush all the buffers containing receive data. Caller must
+ * hold the buffer lock and must have ensured no parallel flush to
+ * ldisc is running.
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static void __tty_buffer_flush(struct tty_struct *tty)
+{
+ struct tty_buffer *thead;
+
+ while ((thead = tty->buf.head) != NULL) {
+ tty->buf.head = thead->next;
+ tty_buffer_free(tty, thead);
+ }
+ tty->buf.tail = NULL;
+}
+
+/**
+ * tty_buffer_flush - flush full tty buffers
+ * @tty: tty to flush
+ *
+ * flush all the buffers containing receive data. If the buffer is
+ * being processed by flush_to_ldisc then we defer the processing
+ * to that function
+ *
+ * Locking: none
+ */
+
+void tty_buffer_flush(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+
+ /* If the data is being pushed to the tty layer then we can't
+ process it here. Instead set a flag and the flush_to_ldisc
+ path will process the flush request before it exits */
+ if (test_bit(TTY_FLUSHING, &tty->flags)) {
+ set_bit(TTY_FLUSHPENDING, &tty->flags);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ wait_event(tty->read_wait,
+ test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+ return;
+ } else
+ __tty_buffer_flush(tty);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+}
+
+/**
+ * tty_buffer_find - find a free tty buffer
+ * @tty: tty owning the buffer
+ * @size: characters wanted
+ *
+ * Locate an existing suitable tty buffer or if we are lacking one then
+ * allocate a new one. We round our buffers off in 256 character chunks
+ * to get better allocation behaviour.
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer **tbh = &tty->buf.free;
+ while ((*tbh) != NULL) {
+ struct tty_buffer *t = *tbh;
+ if (t->size >= size) {
+ *tbh = t->next;
+ t->next = NULL;
+ t->used = 0;
+ t->commit = 0;
+ t->read = 0;
+ tty->buf.memory_used += t->size;
+ return t;
+ }
+ tbh = &((*tbh)->next);
+ }
+ /* Round the buffer size out */
+ size = (size + 0xFF) & ~0xFF;
+ return tty_buffer_alloc(tty, size);
+ /* Should possibly check if this fails for the largest buffer we
+ have queued and recycle that ? */
+}
+
+/**
+ * tty_buffer_request_room - grow tty buffer if needed
+ * @tty: tty structure
+ * @size: size desired
+ *
+ * Make at least size bytes of linear space available for the tty
+ * buffer. If we fail return the size we managed to find.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+{
+ struct tty_buffer *b, *n;
+ int left;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+
+ /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
+ remove this conditional if its worth it. This would be invisible
+ to the callers */
+ if ((b = tty->buf.tail) != NULL)
+ left = b->size - b->used;
+ else
+ left = 0;
+
+ if (left < size) {
+ /* This is the slow path - looking for new buffers to use */
+ if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if (b != NULL) {
+ b->next = n;
+ b->commit = b->used;
+ } else
+ tty->buf.head = n;
+ tty->buf.tail = n;
+ } else
+ size = left;
+ }
+
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ return size;
+}
+EXPORT_SYMBOL_GPL(tty_buffer_request_room);
+
+/**
+ * tty_insert_flip_string - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. All the characters
+ * passed are marked as without error. Returns the number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
+int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
+ size_t size)
+{
+ int copied = 0;
+ do {
+ int space = tty_buffer_request_room(tty, size - copied);
+ struct tty_buffer *tb = tty->buf.tail;
+ /* If there is no space then tb may be NULL */
+ if (unlikely(space == 0))
+ break;
+ memcpy(tb->char_buf_ptr + tb->used, chars, space);
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ copied += space;
+ chars += space;
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ } while (unlikely(size > copied));
+ return copied;
+}
+EXPORT_SYMBOL(tty_insert_flip_string);
+
+/**
+ * tty_insert_flip_string_flags - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @flags: flag bytes
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. For each character
+ * the flags array indicates the status of the character. Returns the
+ * number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
+int tty_insert_flip_string_flags(struct tty_struct *tty,
+ const unsigned char *chars, const char *flags, size_t size)
+{
+ int copied = 0;
+ do {
+ int space = tty_buffer_request_room(tty, size - copied);
+ struct tty_buffer *tb = tty->buf.tail;
+ /* If there is no space then tb may be NULL */
+ if (unlikely(space == 0))
+ break;
+ memcpy(tb->char_buf_ptr + tb->used, chars, space);
+ memcpy(tb->flag_buf_ptr + tb->used, flags, space);
+ tb->used += space;
+ copied += space;
+ chars += space;
+ flags += space;
+ /* There is a small chance that we need to split the data over
+ several buffers. If this is the case we must loop */
+ } while (unlikely(size > copied));
+ return copied;
+}
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
+
+/**
+ * tty_schedule_flip - push characters to ldisc
+ * @tty: tty to push from
+ *
+ * Takes any pending buffers and transfers their ownership to the
+ * ldisc side of the queue. It then schedules those characters for
+ * processing by the line discipline.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+
+void tty_schedule_flip(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->commit = tty->buf.tail->used;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ schedule_delayed_work(&tty->buf.work, 1);
+}
+EXPORT_SYMBOL(tty_schedule_flip);
+
+/**
+ * tty_prepare_flip_string - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @size: desired size
+ *
+ * Prepare a block of space in the buffer for data. Returns the length
+ * available and buffer pointer to the space which is now allocated and
+ * accounted for as ready for normal characters. This is used for drivers
+ * that need their own block copy routines into the buffer. There is no
+ * guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
+ */
+
+int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
+ size_t size)
+{
+ int space = tty_buffer_request_room(tty, size);
+ if (likely(space)) {
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+ tb->used += space;
+ }
+ return space;
+}
+EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
+
+/**
+ * tty_prepare_flip_string_flags - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @flags: return pointer for status flag write area
+ * @size: desired size
+ *
+ * Prepare a block of space in the buffer for data. Returns the length
+ * available and buffer pointer to the space which is now allocated and
+ * accounted for as ready for characters. This is used for drivers
+ * that need their own block copy routines into the buffer. There is no
+ * guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
+ */
+
+int tty_prepare_flip_string_flags(struct tty_struct *tty,
+ unsigned char **chars, char **flags, size_t size)
+{
+ int space = tty_buffer_request_room(tty, size);
+ if (likely(space)) {
+ struct tty_buffer *tb = tty->buf.tail;
+ *chars = tb->char_buf_ptr + tb->used;
+ *flags = tb->flag_buf_ptr + tb->used;
+ tb->used += space;
+ }
+ return space;
+}
+EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
+
+
+
+/**
+ * flush_to_ldisc
+ * @work: tty structure passed from work queue.
+ *
+ * This routine is called out of the software interrupt to flush data
+ * from the buffer chain to the line discipline.
+ *
+ * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
+ * while invoking the line discipline receive_buf method. The
+ * receive_buf method is single threaded for each tty instance.
+ */
+
+static void flush_to_ldisc(struct work_struct *work)
+{
+ struct tty_struct *tty =
+ container_of(work, struct tty_struct, buf.work.work);
+ unsigned long flags;
+ struct tty_ldisc *disc;
+ struct tty_buffer *tbuf, *head;
+ char *char_buf;
+ unsigned char *flag_buf;
+
+ disc = tty_ldisc_ref(tty);
+ if (disc == NULL) /* !TTY_LDISC */
+ return;
+
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ /* So we know a flush is running */
+ set_bit(TTY_FLUSHING, &tty->flags);
+ head = tty->buf.head;
+ if (head != NULL) {
+ tty->buf.head = NULL;
+ for (;;) {
+ int count = head->commit - head->read;
+ if (!count) {
+ if (head->next == NULL)
+ break;
+ tbuf = head;
+ head = head->next;
+ tty_buffer_free(tty, tbuf);
+ continue;
+ }
+ /* Ldisc or user is trying to flush the buffers
+ we are feeding to the ldisc, stop feeding the
+ line discipline as we want to empty the queue */
+ if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+ break;
+ if (!tty->receive_room) {
+ schedule_delayed_work(&tty->buf.work, 1);
+ break;
+ }
+ if (count > tty->receive_room)
+ count = tty->receive_room;
+ char_buf = head->char_buf_ptr + head->read;
+ flag_buf = head->flag_buf_ptr + head->read;
+ head->read += count;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ disc->ops->receive_buf(tty, char_buf,
+ flag_buf, count);
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ }
+ /* Restore the queue head */
+ tty->buf.head = head;
+ }
+ /* We may have a deferred request to flush the input buffer,
+ if so pull the chain under the lock and empty the queue */
+ if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
+ __tty_buffer_flush(tty);
+ clear_bit(TTY_FLUSHPENDING, &tty->flags);
+ wake_up(&tty->read_wait);
+ }
+ clear_bit(TTY_FLUSHING, &tty->flags);
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ tty_ldisc_deref(disc);
+}
+
+/**
+ * tty_flip_buffer_push - terminal
+ * @tty: tty to push
+ *
+ * Queue a push of the terminal flip buffers to the line discipline. This
+ * function must not be called from IRQ context if tty->low_latency is set.
+ *
+ * In the event of the queue being busy for flipping the work will be
+ * held off and retried later.
+ *
+ * Locking: tty buffer lock. Driver locks in low latency mode.
+ */
+
+void tty_flip_buffer_push(struct tty_struct *tty)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ if (tty->buf.tail != NULL)
+ tty->buf.tail->commit = tty->buf.tail->used;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ if (tty->low_latency)
+ flush_to_ldisc(&tty->buf.work.work);
+ else
+ schedule_delayed_work(&tty->buf.work, 1);
+}
+EXPORT_SYMBOL(tty_flip_buffer_push);
+
+/**
+ * tty_buffer_init - prepare a tty buffer structure
+ * @tty: tty to initialise
+ *
+ * Set up the initial state of the buffer management for a tty device.
+ * Must be called before the other tty buffer functions are used.
+ *
+ * Locking: none
+ */
+
+void tty_buffer_init(struct tty_struct *tty)
+{
+ spin_lock_init(&tty->buf.lock);
+ tty->buf.head = NULL;
+ tty->buf.tail = NULL;
+ tty->buf.free = NULL;
+ tty->buf.memory_used = 0;
+ INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc);
+}
+
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e4dce87..7053d63 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -49,7 +49,7 @@
* implement CONFIG_VT and generalize console device interface.
* -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
*
- * Rewrote init_dev and release_dev to eliminate races.
+ * Rewrote tty_init_dev and tty_release_dev to eliminate races.
* -- Bill Hawes <whawes@star.net>, June 97
*
* Added devfs support.
@@ -136,13 +136,6 @@
DEFINE_MUTEX(tty_mutex);
EXPORT_SYMBOL(tty_mutex);
-#ifdef CONFIG_UNIX98_PTYS
-extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
-static int ptmx_open(struct inode *, struct file *);
-#endif
-
-static void initialize_tty_struct(struct tty_struct *tty);
-
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
ssize_t redirected_tty_write(struct file *, const char __user *,
@@ -171,13 +164,11 @@
* Locking: none
*/
-static struct tty_struct *alloc_tty_struct(void)
+struct tty_struct *alloc_tty_struct(void)
{
return kzalloc(sizeof(struct tty_struct), GFP_KERNEL);
}
-static void tty_buffer_free_all(struct tty_struct *);
-
/**
* free_tty_struct - free a disused tty
* @tty: tty struct to free
@@ -187,7 +178,7 @@
* Locking: none. Must be called after tty is definitely unused
*/
-static inline void free_tty_struct(struct tty_struct *tty)
+void free_tty_struct(struct tty_struct *tty)
{
kfree(tty->write_buf);
tty_buffer_free_all(tty);
@@ -263,398 +254,6 @@
return 0;
}
-/*
- * Tty buffer allocation management
- */
-
-/**
- * tty_buffer_free_all - free buffers used by a tty
- * @tty: tty to free from
- *
- * Remove all the buffers pending on a tty whether queued with data
- * or in the free ring. Must be called when the tty is no longer in use
- *
- * Locking: none
- */
-
-static void tty_buffer_free_all(struct tty_struct *tty)
-{
- struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- kfree(thead);
- }
- while ((thead = tty->buf.free) != NULL) {
- tty->buf.free = thead->next;
- kfree(thead);
- }
- tty->buf.tail = NULL;
- tty->buf.memory_used = 0;
-}
-
-/**
- * tty_buffer_init - prepare a tty buffer structure
- * @tty: tty to initialise
- *
- * Set up the initial state of the buffer management for a tty device.
- * Must be called before the other tty buffer functions are used.
- *
- * Locking: none
- */
-
-static void tty_buffer_init(struct tty_struct *tty)
-{
- spin_lock_init(&tty->buf.lock);
- tty->buf.head = NULL;
- tty->buf.tail = NULL;
- tty->buf.free = NULL;
- tty->buf.memory_used = 0;
-}
-
-/**
- * tty_buffer_alloc - allocate a tty buffer
- * @tty: tty device
- * @size: desired size (characters)
- *
- * Allocate a new tty buffer to hold the desired number of characters.
- * Return NULL if out of memory or the allocation would exceed the
- * per device queue
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
-{
- struct tty_buffer *p;
-
- if (tty->buf.memory_used + size > 65536)
- return NULL;
- p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
- if (p == NULL)
- return NULL;
- p->used = 0;
- p->size = size;
- p->next = NULL;
- p->commit = 0;
- p->read = 0;
- p->char_buf_ptr = (char *)(p->data);
- p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
- tty->buf.memory_used += size;
- return p;
-}
-
-/**
- * tty_buffer_free - free a tty buffer
- * @tty: tty owning the buffer
- * @b: the buffer to free
- *
- * Free a tty buffer, or add it to the free list according to our
- * internal strategy
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
-{
- /* Dumb strategy for now - should keep some stats */
- tty->buf.memory_used -= b->size;
- WARN_ON(tty->buf.memory_used < 0);
-
- if (b->size >= 512)
- kfree(b);
- else {
- b->next = tty->buf.free;
- tty->buf.free = b;
- }
-}
-
-/**
- * __tty_buffer_flush - flush full tty buffers
- * @tty: tty to flush
- *
- * flush all the buffers containing receive data. Caller must
- * hold the buffer lock and must have ensured no parallel flush to
- * ldisc is running.
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static void __tty_buffer_flush(struct tty_struct *tty)
-{
- struct tty_buffer *thead;
-
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- tty_buffer_free(tty, thead);
- }
- tty->buf.tail = NULL;
-}
-
-/**
- * tty_buffer_flush - flush full tty buffers
- * @tty: tty to flush
- *
- * flush all the buffers containing receive data. If the buffer is
- * being processed by flush_to_ldisc then we defer the processing
- * to that function
- *
- * Locking: none
- */
-
-static void tty_buffer_flush(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
-
- /* If the data is being pushed to the tty layer then we can't
- process it here. Instead set a flag and the flush_to_ldisc
- path will process the flush request before it exits */
- if (test_bit(TTY_FLUSHING, &tty->flags)) {
- set_bit(TTY_FLUSHPENDING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- wait_event(tty->read_wait,
- test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
- return;
- } else
- __tty_buffer_flush(tty);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
-}
-
-/**
- * tty_buffer_find - find a free tty buffer
- * @tty: tty owning the buffer
- * @size: characters wanted
- *
- * Locate an existing suitable tty buffer or if we are lacking one then
- * allocate a new one. We round our buffers off in 256 character chunks
- * to get better allocation behaviour.
- *
- * Locking: Caller must hold tty->buf.lock
- */
-
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
-{
- struct tty_buffer **tbh = &tty->buf.free;
- while ((*tbh) != NULL) {
- struct tty_buffer *t = *tbh;
- if (t->size >= size) {
- *tbh = t->next;
- t->next = NULL;
- t->used = 0;
- t->commit = 0;
- t->read = 0;
- tty->buf.memory_used += t->size;
- return t;
- }
- tbh = &((*tbh)->next);
- }
- /* Round the buffer size out */
- size = (size + 0xFF) & ~0xFF;
- return tty_buffer_alloc(tty, size);
- /* Should possibly check if this fails for the largest buffer we
- have queued and recycle that ? */
-}
-
-/**
- * tty_buffer_request_room - grow tty buffer if needed
- * @tty: tty structure
- * @size: size desired
- *
- * Make at least size bytes of linear space available for the tty
- * buffer. If we fail return the size we managed to find.
- *
- * Locking: Takes tty->buf.lock
- */
-int tty_buffer_request_room(struct tty_struct *tty, size_t size)
-{
- struct tty_buffer *b, *n;
- int left;
- unsigned long flags;
-
- spin_lock_irqsave(&tty->buf.lock, flags);
-
- /* OPTIMISATION: We could keep a per tty "zero" sized buffer to
- remove this conditional if its worth it. This would be invisible
- to the callers */
- if ((b = tty->buf.tail) != NULL)
- left = b->size - b->used;
- else
- left = 0;
-
- if (left < size) {
- /* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(tty, size)) != NULL) {
- if (b != NULL) {
- b->next = n;
- b->commit = b->used;
- } else
- tty->buf.head = n;
- tty->buf.tail = n;
- } else
- size = left;
- }
-
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- return size;
-}
-EXPORT_SYMBOL_GPL(tty_buffer_request_room);
-
-/**
- * tty_insert_flip_string - Add characters to the tty buffer
- * @tty: tty structure
- * @chars: characters
- * @size: size
- *
- * Queue a series of bytes to the tty buffering. All the characters
- * passed are marked as without error. Returns the number added.
- *
- * Locking: Called functions may take tty->buf.lock
- */
-
-int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
- size_t size)
-{
- int copied = 0;
- do {
- int space = tty_buffer_request_room(tty, size - copied);
- struct tty_buffer *tb = tty->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0))
- break;
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
- tb->used += space;
- copied += space;
- chars += space;
- /* There is a small chance that we need to split the data over
- several buffers. If this is the case we must loop */
- } while (unlikely(size > copied));
- return copied;
-}
-EXPORT_SYMBOL(tty_insert_flip_string);
-
-/**
- * tty_insert_flip_string_flags - Add characters to the tty buffer
- * @tty: tty structure
- * @chars: characters
- * @flags: flag bytes
- * @size: size
- *
- * Queue a series of bytes to the tty buffering. For each character
- * the flags array indicates the status of the character. Returns the
- * number added.
- *
- * Locking: Called functions may take tty->buf.lock
- */
-
-int tty_insert_flip_string_flags(struct tty_struct *tty,
- const unsigned char *chars, const char *flags, size_t size)
-{
- int copied = 0;
- do {
- int space = tty_buffer_request_room(tty, size - copied);
- struct tty_buffer *tb = tty->buf.tail;
- /* If there is no space then tb may be NULL */
- if (unlikely(space == 0))
- break;
- memcpy(tb->char_buf_ptr + tb->used, chars, space);
- memcpy(tb->flag_buf_ptr + tb->used, flags, space);
- tb->used += space;
- copied += space;
- chars += space;
- flags += space;
- /* There is a small chance that we need to split the data over
- several buffers. If this is the case we must loop */
- } while (unlikely(size > copied));
- return copied;
-}
-EXPORT_SYMBOL(tty_insert_flip_string_flags);
-
-/**
- * tty_schedule_flip - push characters to ldisc
- * @tty: tty to push from
- *
- * Takes any pending buffers and transfers their ownership to the
- * ldisc side of the queue. It then schedules those characters for
- * processing by the line discipline.
- *
- * Locking: Takes tty->buf.lock
- */
-
-void tty_schedule_flip(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- schedule_delayed_work(&tty->buf.work, 1);
-}
-EXPORT_SYMBOL(tty_schedule_flip);
-
-/**
- * tty_prepare_flip_string - make room for characters
- * @tty: tty
- * @chars: return pointer for character write area
- * @size: desired size
- *
- * Prepare a block of space in the buffer for data. Returns the length
- * available and buffer pointer to the space which is now allocated and
- * accounted for as ready for normal characters. This is used for drivers
- * that need their own block copy routines into the buffer. There is no
- * guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking tty->buf.lock
- */
-
-int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
- size_t size)
-{
- int space = tty_buffer_request_room(tty, size);
- if (likely(space)) {
- struct tty_buffer *tb = tty->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
- tb->used += space;
- }
- return space;
-}
-
-EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
-
-/**
- * tty_prepare_flip_string_flags - make room for characters
- * @tty: tty
- * @chars: return pointer for character write area
- * @flags: return pointer for status flag write area
- * @size: desired size
- *
- * Prepare a block of space in the buffer for data. Returns the length
- * available and buffer pointer to the space which is now allocated and
- * accounted for as ready for characters. This is used for drivers
- * that need their own block copy routines into the buffer. There is no
- * guarantee the buffer is a DMA target!
- *
- * Locking: May call functions taking tty->buf.lock
- */
-
-int tty_prepare_flip_string_flags(struct tty_struct *tty,
- unsigned char **chars, char **flags, size_t size)
-{
- int space = tty_buffer_request_room(tty, size);
- if (likely(space)) {
- struct tty_buffer *tb = tty->buf.tail;
- *chars = tb->char_buf_ptr + tb->used;
- *flags = tb->flag_buf_ptr + tb->used;
- tb->used += space;
- }
- return space;
-}
-
-EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
-
-
-
/**
* get_tty_driver - find device of a tty
* @dev_t: device identifier
@@ -675,7 +274,7 @@
if (device < base || device >= base + p->num)
continue;
*index = device - base;
- return p;
+ return tty_driver_kref_get(p);
}
return NULL;
}
@@ -719,7 +318,7 @@
if (tty_line >= 0 && tty_line <= p->num && p->ops &&
p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
- res = p;
+ res = tty_driver_kref_get(p);
*line = tty_line;
break;
}
@@ -819,20 +418,6 @@
.fasync = tty_fasync,
};
-#ifdef CONFIG_UNIX98_PTYS
-static const struct file_operations ptmx_fops = {
- .llseek = no_llseek,
- .read = tty_read,
- .write = tty_write,
- .poll = tty_poll,
- .unlocked_ioctl = tty_ioctl,
- .compat_ioctl = tty_compat_ioctl,
- .open = ptmx_open,
- .release = tty_release,
- .fasync = tty_fasync,
-};
-#endif
-
static const struct file_operations console_fops = {
.llseek = no_llseek,
.read = tty_read,
@@ -953,6 +538,7 @@
struct tty_ldisc *ld;
int closecount = 0, n;
unsigned long flags;
+ int refs = 0;
if (!tty)
return;
@@ -1019,8 +605,12 @@
if (tty->session) {
do_each_pid_task(tty->session, PIDTYPE_SID, p) {
spin_lock_irq(&p->sighand->siglock);
- if (p->signal->tty == tty)
+ if (p->signal->tty == tty) {
p->signal->tty = NULL;
+ /* We defer the dereferences outside fo
+ the tasklist lock */
+ refs++;
+ }
if (!p->signal->leader) {
spin_unlock_irq(&p->sighand->siglock);
continue;
@@ -1046,6 +636,10 @@
tty->ctrl_status = 0;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ /* Account for the p->signal references we killed */
+ while (refs--)
+ tty_kref_put(tty);
+
/*
* If one of the devices matches a console pointer, we
* cannot just call hangup() because that will cause
@@ -1115,6 +709,23 @@
EXPORT_SYMBOL(tty_vhangup);
/**
+ * tty_vhangup_self - process vhangup for own ctty
+ *
+ * Perform a vhangup on the current controlling tty
+ */
+
+void tty_vhangup_self(void)
+{
+ struct tty_struct *tty;
+
+ tty = get_current_tty();
+ if (tty) {
+ tty_vhangup(tty);
+ tty_kref_put(tty);
+ }
+}
+
+/**
* tty_hung_up_p - was tty hung up
* @filp: file pointer of tty
*
@@ -1167,16 +778,14 @@
struct pid *tty_pgrp = NULL;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
if (tty) {
tty_pgrp = get_pid(tty->pgrp);
lock_kernel();
- mutex_unlock(&tty_mutex);
- /* XXX: here we race, there is nothing protecting tty */
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
unlock_kernel();
+ tty_kref_put(tty);
} else if (on_exit) {
struct pid *old_pgrp;
spin_lock_irq(¤t->sighand->siglock);
@@ -1188,7 +797,6 @@
kill_pgrp(old_pgrp, SIGCONT, on_exit);
put_pid(old_pgrp);
}
- mutex_unlock(&tty_mutex);
return;
}
if (tty_pgrp) {
@@ -1203,8 +811,6 @@
current->signal->tty_old_pgrp = NULL;
spin_unlock_irq(¤t->sighand->siglock);
- mutex_lock(&tty_mutex);
- /* It is possible that do_tty_hangup has free'd this tty */
tty = get_current_tty();
if (tty) {
unsigned long flags;
@@ -1214,13 +820,13 @@
tty->session = NULL;
tty->pgrp = NULL;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty_kref_put(tty);
} else {
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
" = NULL", tty);
#endif
}
- mutex_unlock(&tty_mutex);
/* Now clear signal->tty under the lock */
read_lock(&tasklist_lock);
@@ -1420,19 +1026,19 @@
/* write_buf/write_cnt is protected by the atomic_write_lock mutex */
if (tty->write_cnt < chunk) {
- unsigned char *buf;
+ unsigned char *buf_chunk;
if (chunk < 1024)
chunk = 1024;
- buf = kmalloc(chunk, GFP_KERNEL);
- if (!buf) {
+ buf_chunk = kmalloc(chunk, GFP_KERNEL);
+ if (!buf_chunk) {
ret = -ENOMEM;
goto out;
}
kfree(tty->write_buf);
tty->write_cnt = chunk;
- tty->write_buf = buf;
+ tty->write_buf = buf_chunk;
}
/* Do the write .. */
@@ -1466,6 +1072,31 @@
return ret;
}
+/**
+ * tty_write_message - write a message to a certain tty, not just the console.
+ * @tty: the destination tty_struct
+ * @msg: the message to write
+ *
+ * This is used for messages that need to be redirected to a specific tty.
+ * We don't put it into the syslog queue right now maybe in the future if
+ * really needed.
+ *
+ * We must still hold the BKL and test the CLOSING flag for the moment.
+ */
+
+void tty_write_message(struct tty_struct *tty, char *msg)
+{
+ lock_kernel();
+ if (tty) {
+ mutex_lock(&tty->atomic_write_lock);
+ if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags))
+ tty->ops->write(tty, msg, strlen(msg));
+ tty_write_unlock(tty);
+ }
+ unlock_kernel();
+ return;
+}
+
/**
* tty_write - write method for tty device file
@@ -1533,42 +1164,6 @@
return tty_write(file, buf, count, ppos);
}
-void tty_port_init(struct tty_port *port)
-{
- memset(port, 0, sizeof(*port));
- init_waitqueue_head(&port->open_wait);
- init_waitqueue_head(&port->close_wait);
- mutex_init(&port->mutex);
- port->close_delay = (50 * HZ) / 100;
- port->closing_wait = (3000 * HZ) / 100;
-}
-EXPORT_SYMBOL(tty_port_init);
-
-int tty_port_alloc_xmit_buf(struct tty_port *port)
-{
- /* We may sleep in get_zeroed_page() */
- mutex_lock(&port->mutex);
- if (port->xmit_buf == NULL)
- port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
- mutex_unlock(&port->mutex);
- if (port->xmit_buf == NULL)
- return -ENOMEM;
- return 0;
-}
-EXPORT_SYMBOL(tty_port_alloc_xmit_buf);
-
-void tty_port_free_xmit_buf(struct tty_port *port)
-{
- mutex_lock(&port->mutex);
- if (port->xmit_buf != NULL) {
- free_page((unsigned long)port->xmit_buf);
- port->xmit_buf = NULL;
- }
- mutex_unlock(&port->mutex);
-}
-EXPORT_SYMBOL(tty_port_free_xmit_buf);
-
-
static char ptychar[] = "pqrstuvwxyzabcde";
/**
@@ -1592,7 +1187,7 @@
}
/**
- * pty_line_name - generate name for a tty
+ * tty_line_name - generate name for a tty
* @driver: the tty driver in use
* @index: the minor number
* @p: output buffer of at least 7 bytes
@@ -1608,10 +1203,148 @@
}
/**
- * init_dev - initialise a tty device
+ * tty_driver_lookup_tty() - find an existing tty, if any
+ * @driver: the driver for the tty
+ * @idx: the minor number
+ *
+ * Return the tty, if found or ERR_PTR() otherwise.
+ *
+ * Locking: tty_mutex must be held. If tty is found, the mutex must
+ * be held until the 'fast-open' is also done. Will change once we
+ * have refcounting in the driver and per driver locking
+ */
+struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
+ struct inode *inode, int idx)
+{
+ struct tty_struct *tty;
+
+ if (driver->ops->lookup)
+ return driver->ops->lookup(driver, inode, idx);
+
+ tty = driver->ttys[idx];
+ return tty;
+}
+
+/**
+ * tty_init_termios - helper for termios setup
+ * @tty: the tty to set up
+ *
+ * Initialise the termios structures for this tty. Thus runs under
+ * the tty_mutex currently so we can be relaxed about ordering.
+ */
+
+int tty_init_termios(struct tty_struct *tty)
+{
+ struct ktermios *tp;
+ int idx = tty->index;
+
+ tp = tty->driver->termios[idx];
+ if (tp == NULL) {
+ tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
+ if (tp == NULL)
+ return -ENOMEM;
+ memcpy(tp, &tty->driver->init_termios,
+ sizeof(struct ktermios));
+ tty->driver->termios[idx] = tp;
+ }
+ tty->termios = tp;
+ tty->termios_locked = tp + 1;
+
+ /* Compatibility until drivers always set this */
+ tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+ tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+ return 0;
+}
+
+/**
+ * tty_driver_install_tty() - install a tty entry in the driver
+ * @driver: the driver for the tty
+ * @tty: the tty
+ *
+ * Install a tty object into the driver tables. The tty->index field
+ * will be set by the time this is called. This method is responsible
+ * for ensuring any need additional structures are allocated and
+ * configured.
+ *
+ * Locking: tty_mutex for now
+ */
+static int tty_driver_install_tty(struct tty_driver *driver,
+ struct tty_struct *tty)
+{
+ int idx = tty->index;
+
+ if (driver->ops->install)
+ return driver->ops->install(driver, tty);
+
+ if (tty_init_termios(tty) == 0) {
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return 0;
+ }
+ return -ENOMEM;
+}
+
+/**
+ * tty_driver_remove_tty() - remove a tty from the driver tables
+ * @driver: the driver for the tty
+ * @idx: the minor number
+ *
+ * Remvoe a tty object from the driver tables. The tty->index field
+ * will be set by the time this is called.
+ *
+ * Locking: tty_mutex for now
+ */
+static void tty_driver_remove_tty(struct tty_driver *driver,
+ struct tty_struct *tty)
+{
+ if (driver->ops->remove)
+ driver->ops->remove(driver, tty);
+ else
+ driver->ttys[tty->index] = NULL;
+}
+
+/*
+ * tty_reopen() - fast re-open of an open tty
+ * @tty - the tty to open
+ *
+ * Return 0 on success, -errno on error.
+ *
+ * Locking: tty_mutex must be held from the time the tty was found
+ * till this open completes.
+ */
+static int tty_reopen(struct tty_struct *tty)
+{
+ struct tty_driver *driver = tty->driver;
+
+ if (test_bit(TTY_CLOSING, &tty->flags))
+ return -EIO;
+
+ if (driver->type == TTY_DRIVER_TYPE_PTY &&
+ driver->subtype == PTY_TYPE_MASTER) {
+ /*
+ * special case for PTY masters: only one open permitted,
+ * and the slave side open count is incremented as well.
+ */
+ if (tty->count)
+ return -EIO;
+
+ tty->link->count++;
+ }
+ tty->count++;
+ tty->driver = driver; /* N.B. why do this every time?? */
+
+ WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
+
+ return 0;
+}
+
+/**
+ * tty_init_dev - initialise a tty device
* @driver: tty driver we are opening a device on
* @idx: device index
- * @tty: returned tty structure
+ * @ret_tty: returned tty structure
+ * @first_ok: ok to open a new device (used by ptmx)
*
* Prepare a tty device. This may not be a "new" clean device but
* could also be an active device. The pty drivers require special
@@ -1631,37 +1364,16 @@
* relaxed for the (most common) case of reopening a tty.
*/
-static int init_dev(struct tty_driver *driver, int idx,
- struct tty_struct **ret_tty)
+struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
+ int first_ok)
{
- struct tty_struct *tty, *o_tty;
- struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
- struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
- int retval = 0;
+ struct tty_struct *tty;
+ int retval;
- /* check whether we're reopening an existing tty */
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- tty = devpts_get_tty(idx);
- /*
- * If we don't have a tty here on a slave open, it's because
- * the master already started the close process and there's
- * no relation between devpts file and tty anymore.
- */
- if (!tty && driver->subtype == PTY_TYPE_SLAVE) {
- retval = -EIO;
- goto end_init;
- }
- /*
- * It's safe from now on because init_dev() is called with
- * tty_mutex held and release_dev() won't change tty->count
- * or tty->flags without having to grab tty_mutex
- */
- if (tty && driver->subtype == PTY_TYPE_MASTER)
- tty = tty->link;
- } else {
- tty = driver->ttys[idx];
- }
- if (tty) goto fast_track;
+ /* Check if pty master is being opened multiple times */
+ if (driver->subtype == PTY_TYPE_MASTER &&
+ (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok)
+ return ERR_PTR(-EIO);
/*
* First time open is complex, especially for PTY devices.
@@ -1671,189 +1383,69 @@
* and locked termios may be retained.)
*/
- if (!try_module_get(driver->owner)) {
- retval = -ENODEV;
- goto end_init;
- }
-
- o_tty = NULL;
- tp = o_tp = NULL;
- ltp = o_ltp = NULL;
+ if (!try_module_get(driver->owner))
+ return ERR_PTR(-ENODEV);
tty = alloc_tty_struct();
if (!tty)
goto fail_no_mem;
- initialize_tty_struct(tty);
- tty->driver = driver;
- tty->ops = driver->ops;
- tty->index = idx;
- tty_line_name(driver, idx, tty->name);
+ initialize_tty_struct(tty, driver, idx);
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- tp_loc = &tty->termios;
- ltp_loc = &tty->termios_locked;
- } else {
- tp_loc = &driver->termios[idx];
- ltp_loc = &driver->termios_locked[idx];
+ retval = tty_driver_install_tty(driver, tty);
+ if (retval < 0) {
+ free_tty_struct(tty);
+ module_put(driver->owner);
+ return ERR_PTR(retval);
}
- if (!*tp_loc) {
- tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!tp)
- goto free_mem_out;
- *tp = driver->init_termios;
- }
-
- if (!*ltp_loc) {
- ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!ltp)
- goto free_mem_out;
- }
-
- if (driver->type == TTY_DRIVER_TYPE_PTY) {
- o_tty = alloc_tty_struct();
- if (!o_tty)
- goto free_mem_out;
- initialize_tty_struct(o_tty);
- o_tty->driver = driver->other;
- o_tty->ops = driver->ops;
- o_tty->index = idx;
- tty_line_name(driver->other, idx, o_tty->name);
-
- if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
- o_tp_loc = &o_tty->termios;
- o_ltp_loc = &o_tty->termios_locked;
- } else {
- o_tp_loc = &driver->other->termios[idx];
- o_ltp_loc = &driver->other->termios_locked[idx];
- }
-
- if (!*o_tp_loc) {
- o_tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!o_tp)
- goto free_mem_out;
- *o_tp = driver->other->init_termios;
- }
-
- if (!*o_ltp_loc) {
- o_ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
- if (!o_ltp)
- goto free_mem_out;
- }
-
- /*
- * Everything allocated ... set up the o_tty structure.
- */
- if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM))
- driver->other->ttys[idx] = o_tty;
- if (!*o_tp_loc)
- *o_tp_loc = o_tp;
- if (!*o_ltp_loc)
- *o_ltp_loc = o_ltp;
- o_tty->termios = *o_tp_loc;
- o_tty->termios_locked = *o_ltp_loc;
- driver->other->refcount++;
- if (driver->subtype == PTY_TYPE_MASTER)
- o_tty->count++;
-
- /* Establish the links in both directions */
- tty->link = o_tty;
- o_tty->link = tty;
- }
-
- /*
- * All structures have been allocated, so now we install them.
- * Failures after this point use release_tty to clean up, so
- * there's no need to null out the local pointers.
- */
- if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM))
- driver->ttys[idx] = tty;
-
- if (!*tp_loc)
- *tp_loc = tp;
- if (!*ltp_loc)
- *ltp_loc = ltp;
- tty->termios = *tp_loc;
- tty->termios_locked = *ltp_loc;
- /* Compatibility until drivers always set this */
- tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
- tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
- driver->refcount++;
- tty->count++;
-
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
* to decrement the use counts, as release_tty doesn't care.
*/
- retval = tty_ldisc_setup(tty, o_tty);
-
+ retval = tty_ldisc_setup(tty, tty->link);
if (retval)
goto release_mem_out;
- goto success;
-
- /*
- * This fast open can be used if the tty is already open.
- * No memory is allocated, and the only failures are from
- * attempting to open a closing tty or attempting multiple
- * opens on a pty master.
- */
-fast_track:
- if (test_bit(TTY_CLOSING, &tty->flags)) {
- retval = -EIO;
- goto end_init;
- }
- if (driver->type == TTY_DRIVER_TYPE_PTY &&
- driver->subtype == PTY_TYPE_MASTER) {
- /*
- * special case for PTY masters: only one open permitted,
- * and the slave side open count is incremented as well.
- */
- if (tty->count) {
- retval = -EIO;
- goto end_init;
- }
- tty->link->count++;
- }
- tty->count++;
- tty->driver = driver; /* N.B. why do this every time?? */
-
- /* FIXME */
- if (!test_bit(TTY_LDISC, &tty->flags))
- printk(KERN_ERR "init_dev but no ldisc\n");
-success:
- *ret_tty = tty;
-
- /* All paths come through here to release the mutex */
-end_init:
- return retval;
-
- /* Release locally allocated memory ... nothing placed in slots */
-free_mem_out:
- kfree(o_tp);
- if (o_tty)
- free_tty_struct(o_tty);
- kfree(ltp);
- kfree(tp);
- free_tty_struct(tty);
+ return tty;
fail_no_mem:
module_put(driver->owner);
- retval = -ENOMEM;
- goto end_init;
+ return ERR_PTR(-ENOMEM);
/* call the tty release_tty routine to clean out this slot */
release_mem_out:
if (printk_ratelimit())
- printk(KERN_INFO "init_dev: ldisc open failed, "
+ printk(KERN_INFO "tty_init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_tty(tty, idx);
- goto end_init;
+ return ERR_PTR(retval);
}
+void tty_free_termios(struct tty_struct *tty)
+{
+ struct ktermios *tp;
+ int idx = tty->index;
+ /* Kill this flag and push into drivers for locking etc */
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+ /* FIXME: Locking on ->termios array */
+ tp = tty->termios;
+ tty->driver->termios[idx] = NULL;
+ kfree(tp);
+ }
+}
+EXPORT_SYMBOL(tty_free_termios);
+
+void tty_shutdown(struct tty_struct *tty)
+{
+ tty_driver_remove_tty(tty->driver, tty);
+ tty_free_termios(tty);
+}
+EXPORT_SYMBOL(tty_shutdown);
+
/**
* release_one_tty - release tty structure memory
+ * @kref: kref of tty we are obliterating
*
* Releases memory associated with a tty structure, and clears out the
* driver table slots. This function is called when a device is no longer
@@ -1863,31 +1455,19 @@
* tty_mutex - sometimes only
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
- * FIXME: should we require tty_mutex is held here ??
*/
-static void release_one_tty(struct tty_struct *tty, int idx)
+static void release_one_tty(struct kref *kref)
{
- int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
- struct ktermios *tp;
+ struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+ struct tty_driver *driver = tty->driver;
- if (!devpts)
- tty->driver->ttys[idx] = NULL;
-
- if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- tp = tty->termios;
- if (!devpts)
- tty->driver->termios[idx] = NULL;
- kfree(tp);
-
- tp = tty->termios_locked;
- if (!devpts)
- tty->driver->termios_locked[idx] = NULL;
- kfree(tp);
- }
-
-
+ if (tty->ops->shutdown)
+ tty->ops->shutdown(tty);
+ else
+ tty_shutdown(tty);
tty->magic = 0;
- tty->driver->refcount--;
+ tty_driver_kref_put(driver);
+ module_put(driver->owner);
file_list_lock();
list_del_init(&tty->tty_files);
@@ -1897,6 +1477,21 @@
}
/**
+ * tty_kref_put - release a tty kref
+ * @tty: tty device
+ *
+ * Release a reference to a tty device and if need be let the kref
+ * layer destruct the object for us
+ */
+
+void tty_kref_put(struct tty_struct *tty)
+{
+ if (tty)
+ kref_put(&tty->kref, release_one_tty);
+}
+EXPORT_SYMBOL(tty_kref_put);
+
+/**
* release_tty - release tty structure memory
*
* Release both @tty and a possible linked partner (think pty pair),
@@ -1907,15 +1502,16 @@
* takes the file list lock internally when working on the list
* of ttys that the driver keeps.
* FIXME: should we require tty_mutex is held here ??
+ *
*/
static void release_tty(struct tty_struct *tty, int idx)
{
- struct tty_driver *driver = tty->driver;
+ /* This should always be true but check for the moment */
+ WARN_ON(tty->index != idx);
if (tty->link)
- release_one_tty(tty->link, idx);
- release_one_tty(tty, idx);
- module_put(driver->owner);
+ tty_kref_put(tty->link);
+ tty_kref_put(tty);
}
/*
@@ -1926,20 +1522,21 @@
* WSH 09/09/97: rewritten to avoid some nasty race conditions that could
* lead to double frees or releasing memory still in use.
*/
-static void release_dev(struct file *filp)
+void tty_release_dev(struct file *filp)
{
struct tty_struct *tty, *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
int devpts;
int idx;
char buf[64];
+ struct inode *inode;
+ inode = filp->f_path.dentry->d_inode;
tty = (struct tty_struct *)filp->private_data;
- if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode,
- "release_dev"))
+ if (tty_paranoia_check(tty, inode, "tty_release_dev"))
return;
- check_tty_count(tty, "release_dev");
+ check_tty_count(tty, "tty_release_dev");
tty_fasync(-1, filp, 0);
@@ -1951,33 +1548,27 @@
#ifdef TTY_PARANOIA_CHECK
if (idx < 0 || idx >= tty->driver->num) {
- printk(KERN_DEBUG "release_dev: bad idx when trying to "
+ printk(KERN_DEBUG "tty_release_dev: bad idx when trying to "
"free (%s)\n", tty->name);
return;
}
- if (!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
+ if (!devpts) {
if (tty != tty->driver->ttys[idx]) {
- printk(KERN_DEBUG "release_dev: driver.table[%d] not tty "
+ printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, tty->name);
return;
}
if (tty->termios != tty->driver->termios[idx]) {
- printk(KERN_DEBUG "release_dev: driver.termios[%d] not termios "
+ printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios "
"for (%s)\n",
idx, tty->name);
return;
}
- if (tty->termios_locked != tty->driver->termios_locked[idx]) {
- printk(KERN_DEBUG "release_dev: driver.termios_locked[%d] not "
- "termios_locked for (%s)\n",
- idx, tty->name);
- return;
- }
}
#endif
#ifdef TTY_DEBUG_HANGUP
- printk(KERN_DEBUG "release_dev of %s (tty count=%d)...",
+ printk(KERN_DEBUG "tty_release_dev of %s (tty count=%d)...",
tty_name(tty, buf), tty->count);
#endif
@@ -1985,26 +1576,19 @@
if (tty->driver->other &&
!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (o_tty != tty->driver->other->ttys[idx]) {
- printk(KERN_DEBUG "release_dev: other->table[%d] "
+ printk(KERN_DEBUG "tty_release_dev: other->table[%d] "
"not o_tty for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->termios != tty->driver->other->termios[idx]) {
- printk(KERN_DEBUG "release_dev: other->termios[%d] "
+ printk(KERN_DEBUG "tty_release_dev: other->termios[%d] "
"not o_termios for (%s)\n",
idx, tty->name);
return;
}
- if (o_tty->termios_locked !=
- tty->driver->other->termios_locked[idx]) {
- printk(KERN_DEBUG "release_dev: other->termios_locked["
- "%d] not o_termios_locked for (%s)\n",
- idx, tty->name);
- return;
- }
if (o_tty->link != tty) {
- printk(KERN_DEBUG "release_dev: bad pty pointers\n");
+ printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
return;
}
}
@@ -2062,7 +1646,7 @@
if (!do_sleep)
break;
- printk(KERN_WARNING "release_dev: %s: read/write wait queue "
+ printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
mutex_unlock(&tty_mutex);
schedule();
@@ -2075,14 +1659,14 @@
*/
if (pty_master) {
if (--o_tty->count < 0) {
- printk(KERN_WARNING "release_dev: bad pty slave count "
+ printk(KERN_WARNING "tty_release_dev: bad pty slave count "
"(%d) for %s\n",
o_tty->count, tty_name(o_tty, buf));
o_tty->count = 0;
}
}
if (--tty->count < 0) {
- printk(KERN_WARNING "release_dev: bad tty->count (%d) for %s\n",
+ printk(KERN_WARNING "tty_release_dev: bad tty->count (%d) for %s\n",
tty->count, tty_name(tty, buf));
tty->count = 0;
}
@@ -2145,11 +1729,11 @@
/* Make this pty number available for reallocation */
if (devpts)
- devpts_kill_index(idx);
+ devpts_kill_index(inode, idx);
}
/**
- * tty_open - open a tty device
+ * __tty_open - open a tty device
* @inode: inode of device file
* @filp: file pointer to tty
*
@@ -2164,14 +1748,14 @@
* The termios state of a pty is reset on first open so that
* settings don't persist across reuse.
*
- * Locking: tty_mutex protects tty, get_tty_driver and init_dev work.
+ * Locking: tty_mutex protects tty, get_tty_driver and tty_init_dev work.
* tty->count should protect the rest.
* ->siglock protects ->signal/->sighand
*/
static int __tty_open(struct inode *inode, struct file *filp)
{
- struct tty_struct *tty;
+ struct tty_struct *tty = NULL;
int noctty, retval;
struct tty_driver *driver;
int index;
@@ -2193,23 +1777,25 @@
mutex_unlock(&tty_mutex);
return -ENXIO;
}
- driver = tty->driver;
+ driver = tty_driver_kref_get(tty->driver);
index = tty->index;
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
/* noctty = 1; */
+ /* FIXME: Should we take a driver reference ? */
+ tty_kref_put(tty);
goto got_driver;
}
#ifdef CONFIG_VT
if (device == MKDEV(TTY_MAJOR, 0)) {
extern struct tty_driver *console_driver;
- driver = console_driver;
+ driver = tty_driver_kref_get(console_driver);
index = fg_console;
noctty = 1;
goto got_driver;
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = console_device(&index);
+ driver = tty_driver_kref_get(console_device(&index));
if (driver) {
/* Don't let /dev/console block */
filp->f_flags |= O_NONBLOCK;
@@ -2226,10 +1812,25 @@
return -ENODEV;
}
got_driver:
- retval = init_dev(driver, index, &tty);
+ if (!tty) {
+ /* check whether we're reopening an existing tty */
+ tty = tty_driver_lookup_tty(driver, inode, index);
+
+ if (IS_ERR(tty))
+ return PTR_ERR(tty);
+ }
+
+ if (tty) {
+ retval = tty_reopen(tty);
+ if (retval)
+ tty = ERR_PTR(retval);
+ } else
+ tty = tty_init_dev(driver, index, 0);
+
mutex_unlock(&tty_mutex);
- if (retval)
- return retval;
+ tty_driver_kref_put(driver);
+ if (IS_ERR(tty))
+ return PTR_ERR(tty);
filp->private_data = tty;
file_move(filp, &tty->tty_files);
@@ -2257,7 +1858,7 @@
printk(KERN_DEBUG "error %d in opening %s...", retval,
tty->name);
#endif
- release_dev(filp);
+ tty_release_dev(filp);
if (retval != -ERESTARTSYS)
return retval;
if (signal_pending(current))
@@ -2296,69 +1897,6 @@
-#ifdef CONFIG_UNIX98_PTYS
-/**
- * ptmx_open - open a unix 98 pty master
- * @inode: inode of device file
- * @filp: file pointer to tty
- *
- * Allocate a unix98 pty master device from the ptmx driver.
- *
- * Locking: tty_mutex protects theinit_dev work. tty->count should
- * protect the rest.
- * allocated_ptys_lock handles the list of free pty numbers
- */
-
-static int __ptmx_open(struct inode *inode, struct file *filp)
-{
- struct tty_struct *tty;
- int retval;
- int index;
-
- nonseekable_open(inode, filp);
-
- /* find a device that is not in use. */
- index = devpts_new_index();
- if (index < 0)
- return index;
-
- mutex_lock(&tty_mutex);
- retval = init_dev(ptm_driver, index, &tty);
- mutex_unlock(&tty_mutex);
-
- if (retval)
- goto out;
-
- set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
- filp->private_data = tty;
- file_move(filp, &tty->tty_files);
-
- retval = devpts_pty_new(tty->link);
- if (retval)
- goto out1;
-
- check_tty_count(tty, "ptmx_open");
- retval = ptm_driver->ops->open(tty, filp);
- if (!retval)
- return 0;
-out1:
- release_dev(filp);
- return retval;
-out:
- devpts_kill_index(index);
- return retval;
-}
-
-static int ptmx_open(struct inode *inode, struct file *filp)
-{
- int ret;
-
- lock_kernel();
- ret = __ptmx_open(inode, filp);
- unlock_kernel();
- return ret;
-}
-#endif
/**
* tty_release - vfs callback for close
@@ -2369,13 +1907,13 @@
* this tty. There may however be several such references.
*
* Locking:
- * Takes bkl. See release_dev
+ * Takes bkl. See tty_release_dev
*/
static int tty_release(struct inode *inode, struct file *filp)
{
lock_kernel();
- release_dev(filp);
+ tty_release_dev(filp);
unlock_kernel();
return 0;
}
@@ -2524,7 +2062,7 @@
/* For a PTY we need to lock the tty side */
mutex_lock(&real_tty->termios_mutex);
- if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
+ if (!memcmp(ws, &real_tty->winsize, sizeof(*ws)))
goto done;
/* Get the PID values and reference them so we can
avoid holding the tty ctrl lock while sending signals */
@@ -2996,7 +2534,7 @@
case TIOCSTI:
return tiocsti(tty, p);
case TIOCGWINSZ:
- return tiocgwinsz(tty, p);
+ return tiocgwinsz(real_tty, p);
case TIOCSWINSZ:
return tiocswinsz(tty, real_tty, p);
case TIOCCONS:
@@ -3026,10 +2564,6 @@
return put_user(tty->ldisc.ops->num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
-#ifdef CONFIG_VT
- case TIOCLINUX:
- return tioclinux(tty, arg);
-#endif
/*
* Break handling
*/
@@ -3220,113 +2754,6 @@
EXPORT_SYMBOL(do_SAK);
/**
- * flush_to_ldisc
- * @work: tty structure passed from work queue.
- *
- * This routine is called out of the software interrupt to flush data
- * from the buffer chain to the line discipline.
- *
- * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
- * while invoking the line discipline receive_buf method. The
- * receive_buf method is single threaded for each tty instance.
- */
-
-static void flush_to_ldisc(struct work_struct *work)
-{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, buf.work.work);
- unsigned long flags;
- struct tty_ldisc *disc;
- struct tty_buffer *tbuf, *head;
- char *char_buf;
- unsigned char *flag_buf;
-
- disc = tty_ldisc_ref(tty);
- if (disc == NULL) /* !TTY_LDISC */
- return;
-
- spin_lock_irqsave(&tty->buf.lock, flags);
- /* So we know a flush is running */
- set_bit(TTY_FLUSHING, &tty->flags);
- head = tty->buf.head;
- if (head != NULL) {
- tty->buf.head = NULL;
- for (;;) {
- int count = head->commit - head->read;
- if (!count) {
- if (head->next == NULL)
- break;
- tbuf = head;
- head = head->next;
- tty_buffer_free(tty, tbuf);
- continue;
- }
- /* Ldisc or user is trying to flush the buffers
- we are feeding to the ldisc, stop feeding the
- line discipline as we want to empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags))
- break;
- if (!tty->receive_room) {
- schedule_delayed_work(&tty->buf.work, 1);
- break;
- }
- if (count > tty->receive_room)
- count = tty->receive_room;
- char_buf = head->char_buf_ptr + head->read;
- flag_buf = head->flag_buf_ptr + head->read;
- head->read += count;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- disc->ops->receive_buf(tty, char_buf,
- flag_buf, count);
- spin_lock_irqsave(&tty->buf.lock, flags);
- }
- /* Restore the queue head */
- tty->buf.head = head;
- }
- /* We may have a deferred request to flush the input buffer,
- if so pull the chain under the lock and empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
- __tty_buffer_flush(tty);
- clear_bit(TTY_FLUSHPENDING, &tty->flags);
- wake_up(&tty->read_wait);
- }
- clear_bit(TTY_FLUSHING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
-
- tty_ldisc_deref(disc);
-}
-
-/**
- * tty_flip_buffer_push - terminal
- * @tty: tty to push
- *
- * Queue a push of the terminal flip buffers to the line discipline. This
- * function must not be called from IRQ context if tty->low_latency is set.
- *
- * In the event of the queue being busy for flipping the work will be
- * held off and retried later.
- *
- * Locking: tty buffer lock. Driver locks in low latency mode.
- */
-
-void tty_flip_buffer_push(struct tty_struct *tty)
-{
- unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
-
- if (tty->low_latency)
- flush_to_ldisc(&tty->buf.work.work);
- else
- schedule_delayed_work(&tty->buf.work, 1);
-}
-
-EXPORT_SYMBOL(tty_flip_buffer_push);
-
-
-/**
* initialize_tty_struct
* @tty: tty to initialize
*
@@ -3336,9 +2763,11 @@
* Locking: none - tty in question must not be exposed at this point
*/
-static void initialize_tty_struct(struct tty_struct *tty)
+void initialize_tty_struct(struct tty_struct *tty,
+ struct tty_driver *driver, int idx)
{
memset(tty, 0, sizeof(struct tty_struct));
+ kref_init(&tty->kref);
tty->magic = TTY_MAGIC;
tty_ldisc_init(tty);
tty->session = NULL;
@@ -3346,7 +2775,6 @@
tty->overrun_time = jiffies;
tty->buf.head = tty->buf.tail = NULL;
tty_buffer_init(tty);
- INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc);
mutex_init(&tty->termios_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
@@ -3357,6 +2785,11 @@
spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
+
+ tty->driver = driver;
+ tty->ops = driver->ops;
+ tty->index = idx;
+ tty_line_name(driver, idx, tty->name);
}
/**
@@ -3377,10 +2810,9 @@
return tty->ops->put_char(tty, ch);
return tty->ops->write(tty, &ch, 1);
}
-
EXPORT_SYMBOL_GPL(tty_put_char);
-static struct class *tty_class;
+struct class *tty_class;
/**
* tty_register_device - register a tty device
@@ -3420,6 +2852,7 @@
return device_create_drvdata(tty_class, device, dev, NULL, name);
}
+EXPORT_SYMBOL(tty_register_device);
/**
* tty_unregister_device - unregister a tty device
@@ -3437,8 +2870,6 @@
device_destroy(tty_class,
MKDEV(driver->major, driver->minor_start) + index);
}
-
-EXPORT_SYMBOL(tty_register_device);
EXPORT_SYMBOL(tty_unregister_device);
struct tty_driver *alloc_tty_driver(int lines)
@@ -3447,28 +2878,66 @@
driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
if (driver) {
+ kref_init(&driver->kref);
driver->magic = TTY_DRIVER_MAGIC;
driver->num = lines;
/* later we'll move allocation of tables here */
}
return driver;
}
+EXPORT_SYMBOL(alloc_tty_driver);
-void put_tty_driver(struct tty_driver *driver)
+static void destruct_tty_driver(struct kref *kref)
{
+ struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
+ int i;
+ struct ktermios *tp;
+ void *p;
+
+ if (driver->flags & TTY_DRIVER_INSTALLED) {
+ /*
+ * Free the termios and termios_locked structures because
+ * we don't want to get memory leaks when modular tty
+ * drivers are removed from the kernel.
+ */
+ for (i = 0; i < driver->num; i++) {
+ tp = driver->termios[i];
+ if (tp) {
+ driver->termios[i] = NULL;
+ kfree(tp);
+ }
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
+ tty_unregister_device(driver, i);
+ }
+ p = driver->ttys;
+ proc_tty_unregister_driver(driver);
+ driver->ttys = NULL;
+ driver->termios = NULL;
+ kfree(p);
+ cdev_del(&driver->cdev);
+ }
kfree(driver);
}
+void tty_driver_kref_put(struct tty_driver *driver)
+{
+ kref_put(&driver->kref, destruct_tty_driver);
+}
+EXPORT_SYMBOL(tty_driver_kref_put);
+
void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op)
{
driver->ops = op;
};
-
-EXPORT_SYMBOL(alloc_tty_driver);
-EXPORT_SYMBOL(put_tty_driver);
EXPORT_SYMBOL(tty_set_operations);
+void put_tty_driver(struct tty_driver *d)
+{
+ tty_driver_kref_put(d);
+}
+EXPORT_SYMBOL(put_tty_driver);
+
/*
* Called by a tty driver to register itself.
*/
@@ -3479,11 +2948,8 @@
dev_t dev;
void **p = NULL;
- if (driver->flags & TTY_DRIVER_INSTALLED)
- return 0;
-
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
- p = kzalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
+ p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
if (!p)
return -ENOMEM;
}
@@ -3507,12 +2973,9 @@
if (p) {
driver->ttys = (struct tty_struct **)p;
driver->termios = (struct ktermios **)(p + driver->num);
- driver->termios_locked = (struct ktermios **)
- (p + driver->num * 2);
} else {
driver->ttys = NULL;
driver->termios = NULL;
- driver->termios_locked = NULL;
}
cdev_init(&driver->cdev, &tty_fops);
@@ -3521,7 +2984,7 @@
if (error) {
unregister_chrdev_region(dev, driver->num);
driver->ttys = NULL;
- driver->termios = driver->termios_locked = NULL;
+ driver->termios = NULL;
kfree(p);
return error;
}
@@ -3535,6 +2998,7 @@
tty_register_device(driver, i, NULL);
}
proc_tty_register_driver(driver);
+ driver->flags |= TTY_DRIVER_INSTALLED;
return 0;
}
@@ -3545,46 +3009,19 @@
*/
int tty_unregister_driver(struct tty_driver *driver)
{
- int i;
- struct ktermios *tp;
- void *p;
-
+#if 0
+ /* FIXME */
if (driver->refcount)
return -EBUSY;
-
+#endif
unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
driver->num);
mutex_lock(&tty_mutex);
list_del(&driver->tty_drivers);
mutex_unlock(&tty_mutex);
-
- /*
- * Free the termios and termios_locked structures because
- * we don't want to get memory leaks when modular tty
- * drivers are removed from the kernel.
- */
- for (i = 0; i < driver->num; i++) {
- tp = driver->termios[i];
- if (tp) {
- driver->termios[i] = NULL;
- kfree(tp);
- }
- tp = driver->termios_locked[i];
- if (tp) {
- driver->termios_locked[i] = NULL;
- kfree(tp);
- }
- if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
- tty_unregister_device(driver, i);
- }
- p = driver->ttys;
- proc_tty_unregister_driver(driver);
- driver->ttys = NULL;
- driver->termios = driver->termios_locked = NULL;
- kfree(p);
- cdev_del(&driver->cdev);
return 0;
}
+
EXPORT_SYMBOL(tty_unregister_driver);
dev_t tty_devnum(struct tty_struct *tty)
@@ -3595,9 +3032,12 @@
void proc_clear_tty(struct task_struct *p)
{
+ struct tty_struct *tty;
spin_lock_irq(&p->sighand->siglock);
+ tty = p->signal->tty;
p->signal->tty = NULL;
spin_unlock_irq(&p->sighand->siglock);
+ tty_kref_put(tty);
}
/* Called under the sighand lock */
@@ -3613,9 +3053,13 @@
tty->pgrp = get_pid(task_pgrp(tsk));
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
tty->session = get_pid(task_session(tsk));
+ if (tsk->signal->tty) {
+ printk(KERN_DEBUG "tty not NULL!!\n");
+ tty_kref_put(tsk->signal->tty);
+ }
}
put_pid(tsk->signal->tty_old_pgrp);
- tsk->signal->tty = tty;
+ tsk->signal->tty = tty_kref_get(tty);
tsk->signal->tty_old_pgrp = NULL;
}
@@ -3629,18 +3073,20 @@
struct tty_struct *get_current_tty(void)
{
struct tty_struct *tty;
- WARN_ON_ONCE(!mutex_is_locked(&tty_mutex));
- tty = current->signal->tty;
- /*
- * session->tty can be changed/cleared from under us, make sure we
- * issue the load. The obtained pointer, when not NULL, is valid as
- * long as we hold tty_mutex.
- */
- barrier();
+ unsigned long flags;
+
+ spin_lock_irqsave(¤t->sighand->siglock, flags);
+ tty = tty_kref_get(current->signal->tty);
+ spin_unlock_irqrestore(¤t->sighand->siglock, flags);
return tty;
}
EXPORT_SYMBOL_GPL(get_current_tty);
+void tty_default_fops(struct file_operations *fops)
+{
+ *fops = tty_fops;
+}
+
/*
* Initialize the console device. This is called *early*, so
* we can't necessarily depend on lots of kernel help here.
@@ -3678,12 +3124,6 @@
/* 3/2004 jmc: why do these devices exist? */
static struct cdev tty_cdev, console_cdev;
-#ifdef CONFIG_UNIX98_PTYS
-static struct cdev ptmx_cdev;
-#endif
-#ifdef CONFIG_VT
-static struct cdev vc0_cdev;
-#endif
/*
* Ok, now we can initialize the rest of the tty devices and can count
@@ -3695,32 +3135,18 @@
if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
"tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
+ device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
"console");
-#ifdef CONFIG_UNIX98_PTYS
- cdev_init(&ptmx_cdev, &ptmx_fops);
- if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
- register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
- panic("Couldn't register /dev/ptmx driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
-#endif
-
#ifdef CONFIG_VT
- cdev_init(&vc0_cdev, &console_fops);
- if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
- register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
- panic("Couldn't register /dev/tty0 driver\n");
- device_create_drvdata(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
-
- vty_init();
+ vty_init(&console_fops);
#endif
return 0;
}
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index bf34e45..a408c8e 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -40,6 +40,15 @@
#define TERMIOS_OLD 8
+/**
+ * tty_chars_in_buffer - characters pending
+ * @tty: terminal
+ *
+ * Return the number of bytes of data in the device private
+ * output queue. If no private method is supplied there is assumed
+ * to be no queue on the device.
+ */
+
int tty_chars_in_buffer(struct tty_struct *tty)
{
if (tty->ops->chars_in_buffer)
@@ -47,26 +56,49 @@
else
return 0;
}
-
EXPORT_SYMBOL(tty_chars_in_buffer);
+/**
+ * tty_write_room - write queue space
+ * @tty: terminal
+ *
+ * Return the number of bytes that can be queued to this device
+ * at the present time. The result should be treated as a guarantee
+ * and the driver cannot offer a value it later shrinks by more than
+ * the number of bytes written. If no method is provided 2K is always
+ * returned and data may be lost as there will be no flow control.
+ */
+
int tty_write_room(struct tty_struct *tty)
{
if (tty->ops->write_room)
return tty->ops->write_room(tty);
return 2048;
}
-
EXPORT_SYMBOL(tty_write_room);
+/**
+ * tty_driver_flush_buffer - discard internal buffer
+ * @tty: terminal
+ *
+ * Discard the internal output buffer for this device. If no method
+ * is provided then either the buffer cannot be hardware flushed or
+ * there is no buffer driver side.
+ */
void tty_driver_flush_buffer(struct tty_struct *tty)
{
if (tty->ops->flush_buffer)
tty->ops->flush_buffer(tty);
}
-
EXPORT_SYMBOL(tty_driver_flush_buffer);
+/**
+ * tty_throttle - flow control
+ * @tty: terminal
+ *
+ * Indicate that a tty should stop transmitting data down the stack.
+ */
+
void tty_throttle(struct tty_struct *tty)
{
/* check TTY_THROTTLED first so it indicates our state */
@@ -76,6 +108,13 @@
}
EXPORT_SYMBOL(tty_throttle);
+/**
+ * tty_unthrottle - flow control
+ * @tty: terminal
+ *
+ * Indicate that a tty may continue transmitting data down the stack.
+ */
+
void tty_unthrottle(struct tty_struct *tty)
{
if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
@@ -112,6 +151,11 @@
}
EXPORT_SYMBOL(tty_wait_until_sent);
+
+/*
+ * Termios Helper Methods
+ */
+
static void unset_locked_termios(struct ktermios *termios,
struct ktermios *old,
struct ktermios *locked)
@@ -346,6 +390,16 @@
}
EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
+/**
+ * tty_encode_baud_rate - set baud rate of the tty
+ * @ibaud: input baud rate
+ * @obad: output baud rate
+ *
+ * Update the current termios data for the tty with the new speed
+ * settings. The caller must hold the termios_mutex for the tty in
+ * question.
+ */
+
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
{
tty_termios_encode_baud_rate(tty->termios, ibaud, obaud);
@@ -430,12 +484,11 @@
* is a bit of layering violation here with n_tty in terms of the
* internal knowledge of this function.
*
- * Locking: termios_sem
+ * Locking: termios_mutex
*/
static void change_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
- int canon_change;
struct ktermios old_termios;
struct tty_ldisc *ld;
unsigned long flags;
@@ -451,18 +504,6 @@
old_termios = *tty->termios;
*tty->termios = *new_termios;
unset_locked_termios(tty->termios, &old_termios, tty->termios_locked);
- canon_change = (old_termios.c_lflag ^ tty->termios->c_lflag) & ICANON;
- if (canon_change) {
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
- tty->canon_head = tty->read_tail;
- tty->canon_data = 0;
- tty->erasing = 0;
- }
-
- /* This bit should be in the ldisc code */
- if (canon_change && !L_ICANON(tty) && tty->read_cnt)
- /* Get characters left over from canonical mode. */
- wake_up_interruptible(&tty->read_wait);
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
@@ -508,7 +549,7 @@
* functions before using change_termios to do the actual changes.
*
* Locking:
- * Called functions take ldisc and termios_sem locks
+ * Called functions take ldisc and termios_mutex locks
*/
static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
@@ -579,25 +620,51 @@
return 0;
}
-static unsigned long inq_canon(struct tty_struct *tty)
-{
- int nr, head, tail;
- if (!tty->canon_data || !tty->read_buf)
- return 0;
- head = tty->canon_head;
- tail = tty->read_tail;
- nr = (head - tail) & (N_TTY_BUF_SIZE-1);
- /* Skip EOF-chars.. */
- while (head != tail) {
- if (test_bit(tail, tty->read_flags) &&
- tty->read_buf[tail] == __DISABLED_CHAR)
- nr--;
- tail = (tail+1) & (N_TTY_BUF_SIZE-1);
+#ifdef TCGETX
+
+/**
+ * set_termiox - set termiox fields if possible
+ * @tty: terminal
+ * @arg: termiox structure from user
+ * @opt: option flags for ioctl type
+ *
+ * Implement the device calling points for the SYS5 termiox ioctl
+ * interface in Linux
+ */
+
+static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
+{
+ struct termiox tnew;
+ struct tty_ldisc *ld;
+
+ if (tty->termiox == NULL)
+ return -EINVAL;
+ if (copy_from_user(&tnew, arg, sizeof(struct termiox)))
+ return -EFAULT;
+
+ ld = tty_ldisc_ref(tty);
+ if (ld != NULL) {
+ if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer)
+ ld->ops->flush_buffer(tty);
+ tty_ldisc_deref(ld);
}
- return nr;
+ if (opt & TERMIOS_WAIT) {
+ tty_wait_until_sent(tty, 0);
+ if (signal_pending(current))
+ return -EINTR;
+ }
+
+ mutex_lock(&tty->termios_mutex);
+ if (tty->ops->set_termiox)
+ tty->ops->set_termiox(tty, &tnew);
+ mutex_unlock(&tty->termios_mutex);
+ return 0;
}
+#endif
+
+
#ifdef TIOCGETP
/*
* These are deprecated, but there is limited support..
@@ -671,7 +738,7 @@
* Updates a terminal from the legacy BSD style terminal information
* structure.
*
- * Locking: termios_sem
+ * Locking: termios_mutex
*/
static int set_sgttyb(struct tty_struct *tty, struct sgttyb __user *sgttyb)
@@ -849,6 +916,7 @@
{
struct tty_struct *real_tty;
void __user *p = (void __user *)arg;
+ int ret = 0;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
@@ -884,18 +952,24 @@
return set_termios(real_tty, p, TERMIOS_OLD);
#ifndef TCGETS2
case TCGETS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
#else
case TCGETS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TCGETS2:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TCSETSF2:
return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT);
case TCSETSW2:
@@ -913,34 +987,59 @@
return set_termios(real_tty, p, TERMIOS_TERMIO);
#ifndef TCGETS2
case TIOCGLCKTRMIOS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ mutex_lock(&real_tty->termios_mutex);
if (user_termios_to_kernel_termios(real_tty->termios_locked,
(struct termios __user *) arg))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
#else
case TIOCGLCKTRMIOS:
+ mutex_lock(&real_tty->termios_mutex);
if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TIOCSLCKTRMIOS:
if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
+ ret = -EPERM;
+ mutex_lock(&real_tty->termios_mutex);
if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
(struct termios __user *) arg))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
#endif
+#ifdef TCGETX
+ case TCGETX:
+ if (real_tty->termiox == NULL)
+ return -EINVAL;
+ mutex_lock(&real_tty->termios_mutex);
+ if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
+ ret = -EFAULT;
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
+ case TCSETX:
+ return set_termiox(real_tty, p, 0);
+ case TCSETXW:
+ return set_termiox(real_tty, p, TERMIOS_WAIT);
+ case TCSETXF:
+ return set_termiox(real_tty, p, TERMIOS_FLUSH);
+#endif
case TIOCGSOFTCAR:
- /* FIXME: for correctness we may need to take the termios
- lock here - review */
- return put_user(C_CLOCAL(real_tty) ? 1 : 0,
+ mutex_lock(&real_tty->termios_mutex);
+ ret = put_user(C_CLOCAL(real_tty) ? 1 : 0,
(int __user *)arg);
+ mutex_unlock(&real_tty->termios_mutex);
+ return ret;
case TIOCSSOFTCAR:
if (get_user(arg, (unsigned int __user *) arg))
return -EFAULT;
@@ -980,7 +1079,7 @@
}
EXPORT_SYMBOL_GPL(tty_perform_flush);
-int n_tty_ioctl(struct tty_struct *tty, struct file *file,
+int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
unsigned long flags;
@@ -1018,13 +1117,6 @@
return 0;
case TCFLSH:
return tty_perform_flush(tty, arg);
- case TIOCOUTQ:
- return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
- case TIOCINQ:
- retval = tty->read_cnt;
- if (L_ICANON(tty))
- retval = inq_canon(tty);
- return put_user(retval, (unsigned int __user *) arg);
case TIOCPKT:
{
int pktmode;
@@ -1050,4 +1142,4 @@
return tty_mode_ioctl(tty, file, cmd, arg);
}
}
-EXPORT_SYMBOL(n_tty_ioctl);
+EXPORT_SYMBOL(n_tty_ioctl_helper);
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
new file mode 100644
index 0000000..553b0e9
--- /dev/null
+++ b/drivers/char/tty_port.c
@@ -0,0 +1,96 @@
+/*
+ * Tty port functions
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+void tty_port_init(struct tty_port *port)
+{
+ memset(port, 0, sizeof(*port));
+ init_waitqueue_head(&port->open_wait);
+ init_waitqueue_head(&port->close_wait);
+ mutex_init(&port->mutex);
+ spin_lock_init(&port->lock);
+ port->close_delay = (50 * HZ) / 100;
+ port->closing_wait = (3000 * HZ) / 100;
+}
+EXPORT_SYMBOL(tty_port_init);
+
+int tty_port_alloc_xmit_buf(struct tty_port *port)
+{
+ /* We may sleep in get_zeroed_page() */
+ mutex_lock(&port->mutex);
+ if (port->xmit_buf == NULL)
+ port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
+ mutex_unlock(&port->mutex);
+ if (port->xmit_buf == NULL)
+ return -ENOMEM;
+ return 0;
+}
+EXPORT_SYMBOL(tty_port_alloc_xmit_buf);
+
+void tty_port_free_xmit_buf(struct tty_port *port)
+{
+ mutex_lock(&port->mutex);
+ if (port->xmit_buf != NULL) {
+ free_page((unsigned long)port->xmit_buf);
+ port->xmit_buf = NULL;
+ }
+ mutex_unlock(&port->mutex);
+}
+EXPORT_SYMBOL(tty_port_free_xmit_buf);
+
+
+/**
+ * tty_port_tty_get - get a tty reference
+ * @port: tty port
+ *
+ * Return a refcount protected tty instance or NULL if the port is not
+ * associated with a tty (eg due to close or hangup)
+ */
+
+struct tty_struct *tty_port_tty_get(struct tty_port *port)
+{
+ unsigned long flags;
+ struct tty_struct *tty;
+
+ spin_lock_irqsave(&port->lock, flags);
+ tty = tty_kref_get(port->tty);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return tty;
+}
+EXPORT_SYMBOL(tty_port_tty_get);
+
+/**
+ * tty_port_tty_set - set the tty of a port
+ * @port: tty port
+ * @tty: the tty
+ *
+ * Associate the port and tty pair. Manages any internal refcounts.
+ * Pass NULL to deassociate a port
+ */
+
+void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (port->tty)
+ tty_kref_put(port->tty);
+ port->tty = tty;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+EXPORT_SYMBOL(tty_port_tty_set);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 60359c3..57029fe 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -100,10 +100,10 @@
#include <linux/font.h>
#include <linux/bitops.h>
#include <linux/notifier.h>
-
-#include <asm/io.h>
+#include <linux/device.h>
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#define MAX_NR_CON_DRIVER 16
@@ -2136,27 +2136,9 @@
release_console_sem();
return 0;
}
- release_console_sem();
-
orig_buf = buf;
orig_count = count;
- /* At this point 'buf' is guaranteed to be a kernel buffer
- * and therefore no access to userspace (and therefore sleeping)
- * will be needed. The con_buf_mtx serializes all tty based
- * console rendering and vcs write/read operations. We hold
- * the console spinlock during the entire write.
- */
-
- acquire_console_sem();
-
- vc = tty->driver_data;
- if (vc == NULL) {
- printk(KERN_ERR "vt: argh, driver_data _became_ NULL !\n");
- release_console_sem();
- goto out;
- }
-
himask = vc->vc_hi_font_mask;
charmask = himask ? 0x1ff : 0xff;
@@ -2370,8 +2352,6 @@
FLUSH
console_conditional_schedule();
release_console_sem();
-
-out:
notify_update(vc);
return n;
#undef FLUSH
@@ -2583,8 +2563,6 @@
int lines;
int ret;
- if (tty->driver->type != TTY_DRIVER_TYPE_CONSOLE)
- return -EINVAL;
if (current->signal->tty != tty && !capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(type, p))
@@ -2778,6 +2756,12 @@
ret = vc_allocate(currcons);
if (ret == 0) {
struct vc_data *vc = vc_cons[currcons].d;
+
+ /* Still being freed */
+ if (vc->vc_tty) {
+ release_console_sem();
+ return -ERESTARTSYS;
+ }
tty->driver_data = vc;
vc->vc_tty = tty;
@@ -2798,34 +2782,20 @@
return ret;
}
-/*
- * We take tty_mutex in here to prevent another thread from coming in via init_dev
- * and taking a ref against the tty while we're in the process of forgetting
- * about it and cleaning things up.
- *
- * This is because vcs_remove_sysfs() can sleep and will drop the BKL.
- */
static void con_close(struct tty_struct *tty, struct file *filp)
{
- mutex_lock(&tty_mutex);
- acquire_console_sem();
- if (tty && tty->count == 1) {
- struct vc_data *vc = tty->driver_data;
+ /* Nothing to do - we defer to shutdown */
+}
- if (vc)
- vc->vc_tty = NULL;
- tty->driver_data = NULL;
- vcs_remove_sysfs(tty);
- release_console_sem();
- mutex_unlock(&tty_mutex);
- /*
- * tty_mutex is released, but we still hold BKL, so there is
- * still exclusion against init_dev()
- */
- return;
- }
+static void con_shutdown(struct tty_struct *tty)
+{
+ struct vc_data *vc = tty->driver_data;
+ BUG_ON(vc == NULL);
+ acquire_console_sem();
+ vc->vc_tty = NULL;
+ vcs_remove_sysfs(tty);
release_console_sem();
- mutex_unlock(&tty_mutex);
+ tty_shutdown(tty);
}
static int default_italic_color = 2; // green (ASCII)
@@ -2950,10 +2920,19 @@
.throttle = con_throttle,
.unthrottle = con_unthrottle,
.resize = vt_resize,
+ .shutdown = con_shutdown
};
-int __init vty_init(void)
+static struct cdev vc0_cdev;
+
+int __init vty_init(const struct file_operations *console_fops)
{
+ cdev_init(&vc0_cdev, console_fops);
+ if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
+ register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
+ panic("Couldn't register /dev/tty0 driver\n");
+ device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+
vcs_init();
console_driver = alloc_tty_driver(MAX_NR_CONSOLES);
@@ -2972,7 +2951,6 @@
tty_set_operations(console_driver, &con_ops);
if (tty_register_driver(console_driver))
panic("Couldn't register console driver\n");
-
kbd_init();
console_map_init();
#ifdef CONFIG_PROM_CONSOLE
@@ -3466,7 +3444,7 @@
if (retval)
goto err;
- con_driver->dev = device_create_drvdata(vtconsole_class, NULL,
+ con_driver->dev = device_create(vtconsole_class, NULL,
MKDEV(0, con_driver->node),
NULL, "vtcon%i",
con_driver->node);
@@ -3577,7 +3555,7 @@
struct con_driver *con = ®istered_con_driver[i];
if (con->con && !con->dev) {
- con->dev = device_create_drvdata(vtconsole_class, NULL,
+ con->dev = device_create(vtconsole_class, NULL,
MKDEV(0, con->node),
NULL, "vtcon%i",
con->node);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index c904e9a..8944ce5 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -395,6 +395,8 @@
kbd = kbd_table + console;
switch (cmd) {
+ case TIOCLINUX:
+ return tioclinux(tty, arg);
case KIOCSOUND:
if (!perm)
goto eperm;
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 871b0cbc..798d7f3 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1231,7 +1231,7 @@
int error = 0;
switch (cmd) {
default:
- error = n_tty_ioctl (tty, file, cmd, arg);
+ error = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
}
return error;
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 5e89fa1..07052ed 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -571,6 +571,7 @@
}
/* prevent other callers from entering ldisc methods */
+ /* FIXME: should use the tty state flags */
tty->disc_data = NULL;
if (!cs->hw.ser)
@@ -642,10 +643,11 @@
return -ENXIO;
switch (cmd) {
- case TCGETS:
- case TCGETA:
- /* pass through to underlying serial device */
- rc = n_tty_ioctl(tty, file, cmd, arg);
+
+ case FIONREAD:
+ /* unused, always return zero */
+ val = 0;
+ rc = put_user(val, p);
break;
case TCFLSH:
@@ -659,20 +661,13 @@
flush_send_queue(cs);
break;
}
- /* flush the serial port's buffer */
- rc = n_tty_ioctl(tty, file, cmd, arg);
- break;
-
- case FIONREAD:
- /* unused, always return zero */
- val = 0;
- rc = put_user(val, p);
- break;
+ /* Pass through */
default:
- rc = -ENOIOCTLCMD;
+ /* pass through to underlying serial device */
+ rc = n_tty_ioctl_helper(tty, file, cmd, arg);
+ break;
}
-
cs_put(cs);
return rc;
}
@@ -680,6 +675,8 @@
/*
* Poll on the tty.
* Unused, always return zero.
+ *
+ * FIXME: should probably return an exception - especially on hangup
*/
static unsigned int
gigaset_tty_poll(struct tty_struct *tty, struct file *file, poll_table *wait)
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 2ae2ec4..21efd99 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -205,7 +205,7 @@
config PC300
tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
- depends on HDLC && PCI
+ depends on HDLC && PCI && BROKEN
---help---
Driver for the Cyclades-PC300 synchronous communication boards.
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index d18e6d2..40759c3 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -418,25 +418,22 @@
{
struct fs3270 *fp;
struct idal_buffer *ib;
- int minor, rc;
+ int minor, rc = 0;
if (imajor(filp->f_path.dentry->d_inode) != IBM_FS3270_MAJOR)
return -ENODEV;
- lock_kernel();
minor = iminor(filp->f_path.dentry->d_inode);
/* Check for minor 0 multiplexer. */
if (minor == 0) {
- struct tty_struct *tty;
- mutex_lock(&tty_mutex);
- tty = get_current_tty();
+ struct tty_struct *tty = get_current_tty();
if (!tty || tty->driver->major != IBM_TTY3270_MAJOR) {
- mutex_unlock(&tty_mutex);
- rc = -ENODEV;
- goto out;
+ tty_kref_put(tty);
+ return -ENODEV;
}
minor = tty->index + RAW3270_FIRSTMINOR;
- mutex_unlock(&tty_mutex);
+ tty_kref_put(tty);
}
+ lock_kernel();
/* Check if some other program is already using fullscreen mode. */
fp = (struct fs3270 *) raw3270_find_view(&fs3270_fn, minor);
if (!IS_ERR(fp)) {
@@ -478,7 +475,7 @@
filp->private_data = fp;
out:
unlock_kernel();
- return 0;
+ return rc;
}
/*
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563..d4104a3 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -44,6 +44,10 @@
#include "8250.h"
+#ifdef CONFIG_SPARC
+#include "suncore.h"
+#endif
+
/*
* Configuration:
* share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
@@ -53,6 +57,13 @@
static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+ return (serial8250_reg.minor - 64) + port->line;
+}
+
/*
* Debugging.
*/
@@ -536,7 +547,7 @@
/*
* FIFO support.
*/
-static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+static void serial8250_clear_fifos(struct uart_8250_port *p)
{
if (p->capabilities & UART_CAP_FIFO) {
serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
@@ -551,7 +562,7 @@
* capability" bit enabled. Note that on XR16C850s, we need to
* reset LCR to write to IER.
*/
-static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
{
if (p->capabilities & UART_CAP_SLEEP) {
if (p->capabilities & UART_CAP_EFR) {
@@ -993,7 +1004,7 @@
return;
DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
- up->port.line, up->port.iobase, up->port.membase);
+ serial_index(&up->port), up->port.iobase, up->port.membase);
/*
* We really do need global IRQs disabled here - we're going to
@@ -1128,8 +1139,8 @@
if (up->capabilities != uart_config[up->port.type].flags) {
printk(KERN_WARNING
"ttyS%d: detected caps %08x should be %08x\n",
- up->port.line, up->capabilities,
- uart_config[up->port.type].flags);
+ serial_index(&up->port), up->capabilities,
+ uart_config[up->port.type].flags);
}
up->port.fifosize = uart_config[up->port.type].fifo_size;
@@ -1424,8 +1435,7 @@
/*
* This handles the interrupt from one port.
*/
-static inline void
-serial8250_handle_port(struct uart_8250_port *up)
+static void serial8250_handle_port(struct uart_8250_port *up)
{
unsigned int status;
unsigned long flags;
@@ -1719,7 +1729,7 @@
/*
* Wait for transmitter & holding register to empty
*/
-static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
{
unsigned int status, tmout = 10000;
@@ -1854,7 +1864,8 @@
*/
if (!(up->port.flags & UPF_BUGGY_UART) &&
(serial_inp(up, UART_LSR) == 0xff)) {
- printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+ printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(&up->port));
return -ENODEV;
}
@@ -1909,7 +1920,8 @@
*/
if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
up->bugs |= UART_BUG_THRE;
- pr_debug("ttyS%d - using backup timer\n", port->line);
+ pr_debug("ttyS%d - using backup timer\n",
+ serial_index(port));
}
}
@@ -1969,7 +1981,7 @@
if (!(up->bugs & UART_BUG_TXEN)) {
up->bugs |= UART_BUG_TXEN;
pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- port->line);
+ serial_index(port));
}
} else {
up->bugs &= ~UART_BUG_TXEN;
@@ -2630,7 +2642,6 @@
return serial8250_find_port_for_earlycon();
}
-static struct uart_driver serial8250_reg;
static struct console serial8250_console = {
.name = "ttyS",
.write = serial8250_console_write,
@@ -2677,7 +2688,6 @@
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
- .nr = UART_NR,
.cons = SERIAL8250_CONSOLE,
};
@@ -2959,10 +2969,12 @@
"%d ports, IRQ sharing %sabled\n", nr_uarts,
share_irqs ? "en" : "dis");
- for (i = 0; i < NR_IRQS; i++)
- spin_lock_init(&irq_lists[i].lock);
-
+#ifdef CONFIG_SPARC
+ ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+ serial8250_reg.nr = UART_NR;
ret = uart_register_driver(&serial8250_reg);
+#endif
if (ret)
goto out;
@@ -2987,7 +2999,11 @@
put_dev:
platform_device_put(serial8250_isa_devs);
unreg_uart_drv:
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
uart_unregister_driver(&serial8250_reg);
+#endif
out:
return ret;
}
@@ -3006,7 +3022,11 @@
platform_driver_unregister(&serial8250_isa_driver);
platform_device_unregister(isa_dev);
+#ifdef CONFIG_SPARC
+ sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
uart_unregister_driver(&serial8250_reg);
+#endif
}
module_init(serial8250_init);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c2f2393..c014ffb 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2041,9 +2041,9 @@
* The device may have been disabled. Re-enable it.
*/
err = pci_enable_device(dev);
+ /* FIXME: We cannot simply error out here */
if (err)
- return err;
-
+ printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
pciserial_resume_ports(priv);
}
return 0;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 77cb342..31786b3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -9,7 +9,6 @@
# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
- depends on (BROKEN || !SPARC)
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
@@ -994,24 +993,12 @@
bool "Support RTS/CTS on 68328 serial port"
depends on SERIAL_68328
-config SERIAL_COLDFIRE
- bool "ColdFire serial support (DEPRECATED)"
- depends on COLDFIRE
- help
- This driver supports the built-in serial ports of the Motorola ColdFire
- family of CPUs.
- This driver is deprecated because it supports only the old interface
- for serial drivers and features like magic keys are not working.
- Please switch to the new style driver because this driver will be
- removed soon.
-
config SERIAL_MCF
- bool "Coldfire serial support (new style driver)"
+ bool "Coldfire serial support"
depends on COLDFIRE
select SERIAL_CORE
help
- This new serial driver supports the Freescale Coldfire serial ports
- using the new serial driver subsystem.
+ This serial driver supports the Freescale Coldfire serial ports.
config SERIAL_MCF_BAUDRATE
int "Default baudrate for Coldfire serial ports"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7e7383e..0c17c8d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -4,6 +4,16 @@
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
+
+# These Sparc drivers have to appear before others such as 8250
+# which share ttySx minor node space. Otherwise console device
+# names change and other unplesantries.
+obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
+obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
+obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
+obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
+obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+
obj-$(CONFIG_SERIAL_8250) += 8250.o
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
@@ -31,16 +41,10 @@
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
-obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
-obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
-obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
-obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
-obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a0d30b..569f0e2 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,7 +1,7 @@
/*
* Blackfin On-Chip Serial Driver
*
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
@@ -42,6 +42,9 @@
#define BFIN_SERIAL_MAJOR 204
#define BFIN_SERIAL_MINOR 64
+static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+
/*
* Setup for console. Argument comes from the menuconfig
*/
@@ -126,13 +129,13 @@
void kgdb_put_debug_char(int chr)
{
struct bfin_serial_port *uart;
-
+
if (CONFIG_KGDB_UART_PORT < 0
|| CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while (!(UART_GET_LSR(uart) & THRE)) {
SSYNC();
}
@@ -152,7 +155,7 @@
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-
+
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
@@ -298,7 +301,11 @@
bfin_serial_mctrl_check(uart);
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
- bfin_serial_stop_tx(&uart->port);
+#ifdef CONFIG_BF54x
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+#endif
+ UART_CLEAR_IER(uart, ETBEI);
return;
}
@@ -317,9 +324,6 @@
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uart->port);
-
- if (uart_circ_empty(xmit))
- bfin_serial_stop_tx(&uart->port);
}
static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
@@ -645,6 +649,42 @@
free_irq(uart->port.irq, uart);
return -EBUSY;
}
+
+# ifdef CONFIG_BF54x
+ {
+ unsigned uart_dma_ch_rx, uart_dma_ch_tx;
+
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ uart_dma_ch_rx = CH_UART3_RX;
+ uart_dma_ch_tx = CH_UART3_TX;
+ break;
+ case IRQ_UART2_RX:
+ uart_dma_ch_rx = CH_UART2_RX;
+ uart_dma_ch_tx = CH_UART2_TX;
+ break;
+ default:
+ uart_dma_ch_rx = uart_dma_ch_tx = 0;
+ break;
+ };
+
+ if (uart_dma_ch_rx &&
+ request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
+ printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ if (uart_dma_ch_tx &&
+ request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
+ printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+ free_dma(uart_dma_ch_rx);
+ free_irq(uart->port.irq, uart);
+ free_irq(uart->port.irq + 1, uart);
+ return -EBUSY;
+ }
+ }
+# endif
#endif
UART_SET_IER(uart, ERBFI);
return 0;
@@ -662,6 +702,20 @@
del_timer(&(uart->rx_dma_timer));
dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
#else
+#ifdef CONFIG_BF54x
+ switch (uart->port.irq) {
+ case IRQ_UART3_RX:
+ free_dma(CH_UART3_RX);
+ free_dma(CH_UART3_TX);
+ break;
+ case IRQ_UART2_RX:
+ free_dma(CH_UART2_RX);
+ free_dma(CH_UART2_TX);
+ break;
+ default:
+ break;
+ };
+#endif
#ifdef CONFIG_KGDB_UART
if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
@@ -757,6 +811,9 @@
val |= UCEN;
UART_PUT_GCTL(uart, val);
+ /* Port speed changed, update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@@ -859,8 +916,9 @@
return;
first = 0;
- for (i = 0; i < nr_ports; i++) {
+ for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
+ bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
bfin_serial_ports[i].port.iotype = UPIO_MEM;
@@ -961,7 +1019,7 @@
* if so, search for the first available port that does have
* console support.
*/
- if (co->index == -1 || co->index >= nr_ports)
+ if (co->index == -1 || co->index >= nr_active_ports)
co->index = 0;
uart = &bfin_serial_ports[co->index];
@@ -1056,7 +1114,7 @@
}
}
-static struct __init console bfin_early_serial_console = {
+static struct __initdata console bfin_early_serial_console = {
.name = "early_BFuart",
.write = early_serial_write,
.device = uart_console_device,
@@ -1072,7 +1130,7 @@
struct bfin_serial_port *uart;
struct ktermios t;
- if (port == -1 || port >= nr_ports)
+ if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
bfin_early_serial_console.index = port;
@@ -1100,20 +1158,26 @@
static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_suspend_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
static int bfin_serial_resume(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(dev);
+ int i;
- if (uart)
- uart_resume_port(&bfin_serial_reg, &uart->port);
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ }
return 0;
}
@@ -1128,32 +1192,31 @@
break;
if (i < dev->num_resources) {
- for (i = 0; i < nr_ports; i++, res++) {
+ for (i = 0; i < nr_active_ports; i++, res++) {
if (bfin_serial_ports[i].port.mapbase != res->start)
continue;
bfin_serial_ports[i].port.dev = &dev->dev;
uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
- platform_set_drvdata(dev, &bfin_serial_ports[i]);
}
}
return 0;
}
-static int bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *dev)
{
- struct bfin_serial_port *uart = platform_get_drvdata(pdev);
+ int i;
-
+ for (i = 0; i < nr_active_ports; i++) {
+ if (bfin_serial_ports[i].port.dev != &dev->dev)
+ continue;
+ uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+ bfin_serial_ports[i].port.dev = NULL;
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- gpio_free(uart->cts_pin);
- gpio_free(uart->rts_pin);
+ gpio_free(bfin_serial_ports[i].cts_pin);
+ gpio_free(bfin_serial_ports[i].rts_pin);
#endif
-
- platform_set_drvdata(pdev, NULL);
-
- if (uart)
- uart_remove_one_port(&bfin_serial_reg, &uart->port);
+ }
return 0;
}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index bf94a77..211c217 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -457,7 +457,6 @@
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
static struct ktermios *serial_termios[NR_PORTS];
-static struct ktermios *serial_termios_locked[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
@@ -4419,6 +4418,7 @@
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
+ put_tty_driver(driver);
return -EBUSY;
}
#endif
@@ -4427,6 +4427,7 @@
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
+ put_tty_driver(driver);
return -EBUSY;
}
#endif
@@ -4446,8 +4447,6 @@
driver->init_termios.c_ispeed = 115200;
driver->init_termios.c_ospeed = 115200;
driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- driver->termios = serial_termios;
- driver->termios_locked = serial_termios_locked;
tty_set_operations(driver, &rs_ops);
serial_driver = driver;
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
deleted file mode 100644
index fbe3835..0000000
--- a/drivers/serial/mcfserial.c
+++ /dev/null
@@ -1,1965 +0,0 @@
-#warning This driver is deprecated. Check Kconfig for details.
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (C) 1999-2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (C) 2001-2002 SnapGear Inc. <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
- *
- * Changes:
- * 08/07/2003 Daniele Bellucci <bellucda@tiscali.it>
- * some cleanups in mcfrs_write.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/nettel.h>
-#include <asm/uaccess.h>
-#include "mcfserial.h"
-
-struct timer_list mcfrs_timer_struct;
-
-/*
- * Default console baud rate, we use this as the default
- * for all ports so init can just open /dev/console and
- * keep going. Perhaps one day the cflag settings for the
- * console can be used instead.
- */
-#if defined(CONFIG_HW_FEITH)
-#define CONSOLE_BAUD_RATE 38400
-#define DEFAULT_CBAUD B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
- defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
-#define CONSOLE_BAUD_RATE 115200
-#define DEFAULT_CBAUD B115200
-#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
- defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET)
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
-#ifndef CONSOLE_BAUD_RATE
-#define CONSOLE_BAUD_RATE 9600
-#define DEFAULT_CBAUD B9600
-#endif
-
-int mcfrs_console_inited = 0;
-int mcfrs_console_port = -1;
-int mcfrs_console_baud = CONSOLE_BAUD_RATE;
-int mcfrs_console_cbaud = DEFAULT_CBAUD;
-
-/*
- * Driver data structures.
- */
-static struct tty_driver *mcfrs_serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging...
- */
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
-#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
-#else
-#define IRQBASE 73
-#endif
-
-/*
- * Configuration table, UARTs to look for at startup.
- */
-static struct mcf_serial mcfrs_table[] = {
- { /* ttyS0 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1),
- .irq = IRQBASE,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#ifdef MCFUART_BASE2
- { /* ttyS1 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
- .irq = IRQBASE+1,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE3
- { /* ttyS2 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
- .irq = IRQBASE+2,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-#ifdef MCFUART_BASE4
- { /* ttyS3 */
- .magic = 0,
- .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
- .irq = IRQBASE+3,
- .flags = ASYNC_BOOT_AUTOCONF,
- },
-#endif
-};
-
-
-#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial))
-
-/*
- * This is used to figure out the divisor speeds and the timeouts.
- */
-static int mcfrs_baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
-};
-#define MCFRS_BAUD_TABLE_SIZE \
- (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- * Magic system request keys. Used for debugging...
- */
-extern int magic_sysrq_key(int ch);
-#endif
-
-
-/*
- * Forware declarations...
- */
-static void mcfrs_change_speed(struct mcf_serial *info);
-static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-static inline int serial_paranoia_check(struct mcf_serial *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char badmagic[] =
- "MCFRS(warning): bad magic number for serial struct %s in %s\n";
- static const char badinfo[] =
- "MCFRS(warning): null mcf_serial for %s in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * Sets or clears DTR and RTS on the requested line.
- */
-static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
-#if 0
- printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
- __FILE__, __LINE__, info, dtr, rts);
-#endif
-
- local_irq_save(flags);
- if (dtr >= 0) {
-#ifdef MCFPP_DTR0
- if (info->line)
- mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
- else
- mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
-#endif
- }
- if (rts >= 0) {
- uartp = info->addr;
- if (rts) {
- info->sigs |= TIOCM_RTS;
- uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
- } else {
- info->sigs &= ~TIOCM_RTS;
- uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
- }
- }
- local_irq_restore(flags);
- return;
-}
-
-/*
- * Gets values of serial signals.
- */
-static int mcfrs_getsignals(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int sigs;
-#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
- unsigned short ppdata;
-#endif
-
-#if 0
- printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
-#endif
-
- local_irq_save(flags);
- uartp = info->addr;
- sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
- sigs |= (info->sigs & TIOCM_RTS);
-
-#ifdef MCFPP_DCD0
-{
- unsigned int ppdata;
- ppdata = mcf_getppdata();
- if (info->line == 0) {
- sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
- } else if (info->line == 1) {
- sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
- sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
- }
-}
-#endif
-
- local_irq_restore(flags);
- return(sigs);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_stop() and mcfrs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void mcfrs_stop(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_stop"))
- return;
-
- local_irq_save(flags);
- uartp = info->addr;
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static void mcfrs_start(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_start"))
- return;
-
- local_irq_save(flags);
- if (info->xmit_cnt && info->xmit_buf) {
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines. All of the following
- * subroutines are declared as inline and are folded into
- * mcfrs_interrupt(). They were separated out for readability's sake.
- *
- * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off. People who may want to modify
- * mcfrs_interrupt() should try to keep the interrupt handler as fast as
- * possible. After you are done making modifications, it is not a bad
- * idea to do:
- *
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static inline void receive_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- struct tty_struct *tty = info->port.tty;
- unsigned char status, ch, flag;
-
- if (!tty)
- return;
-
- uartp = info->addr;
-
- while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
- ch = uartp[MCFUART_URB];
- info->stats.rx++;
-
-#ifdef CONFIG_MAGIC_SYSRQ
- if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
- if (magic_sysrq_key(ch))
- continue;
- }
-#endif
-
- flag = TTY_NORMAL;
- if (status & MCFUART_USR_RXERR) {
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
- if (status & MCFUART_USR_RXBREAK) {
- info->stats.rxbreak++;
- flag = TTY_BREAK;
- } else if (status & MCFUART_USR_RXPARITY) {
- info->stats.rxparity++;
- flag = TTY_PARITY;
- } else if (status & MCFUART_USR_RXOVERRUN) {
- info->stats.rxoverrun++;
- flag = TTY_OVERRUN;
- } else if (status & MCFUART_USR_RXFRAMING) {
- info->stats.rxframing++;
- flag = TTY_FRAME;
- }
- }
- tty_insert_flip_char(tty, ch, flag);
- }
- tty_schedule_flip(tty);
- return;
-}
-
-static inline void transmit_chars(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
-
- uartp = info->addr;
-
- if (info->x_char) {
- /* Send special char - probably flow control */
- uartp[MCFUART_UTB] = info->x_char;
- info->x_char = 0;
- info->stats.tx++;
- }
-
- if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
- info->imr &= ~MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- return;
- }
-
- while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
- uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->stats.tx++;
- if (--info->xmit_cnt <= 0)
- break;
- }
-
- if (info->xmit_cnt < WAKEUP_CHARS)
- schedule_work(&info->tqueue);
- return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t mcfrs_interrupt(int irq, void *dev_id)
-{
- struct mcf_serial *info;
- unsigned char isr;
-
- info = &mcfrs_table[(irq - IRQBASE)];
- isr = info->addr[MCFUART_UISR] & info->imr;
-
- if (isr & MCFUART_UIR_RXREADY)
- receive_chars(info);
- if (isr & MCFUART_UIR_TXREADY)
- transmit_chars(info);
- return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static void mcfrs_offintr(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_wakeup(tty);
-}
-
-
-/*
- * Change of state on a DCD line.
- */
-void mcfrs_modem_change(struct mcf_serial *info, int dcd)
-{
- if (info->count == 0)
- return;
-
- if (info->flags & ASYNC_CHECK_CD) {
- if (dcd)
- wake_up_interruptible(&info->open_wait);
- else
- schedule_work(&info->tqueue_hangup);
- }
-}
-
-
-#ifdef MCFPP_DCD0
-
-unsigned short mcfrs_ppstatus;
-
-/*
- * This subroutine is called when the RS_TIMER goes off. It is used
- * to monitor the state of the DCD lines - since they have no edge
- * sensors and interrupt generators.
- */
-static void mcfrs_timer(void)
-{
- unsigned int ppstatus, dcdval, i;
-
- ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-
- if (ppstatus != mcfrs_ppstatus) {
- for (i = 0; (i < 2); i++) {
- dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
- if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
- mcfrs_modem_change(&mcfrs_table[i],
- ((ppstatus & dcdval) ? 0 : 1));
- }
- }
- }
- mcfrs_ppstatus = ppstatus;
-
- /* Re-arm timer */
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
-}
-
-#endif /* MCFPP_DCD0 */
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * serial interrupt routine -> (scheduler tqueue) ->
- * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
- *
- */
-static void do_serial_hangup(struct work_struct *work)
-{
- struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup);
- struct tty_struct *tty = info->port.tty;
-
- if (tty)
- tty_hangup(tty);
-}
-
-static int startup(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (info->flags & ASYNC_INITIALIZED)
- return 0;
-
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!info->xmit_buf)
- return -ENOMEM;
- }
-
- local_irq_save(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
-#endif
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = info->addr;
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- mcfrs_setsignals(info, 1, 1);
-
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- /*
- * and set the speed of the serial port
- */
- mcfrs_change_speed(info);
-
- /*
- * Lastly enable the UART transmitter and receiver, and
- * interrupt enables.
- */
- info->imr = MCFUART_UIR_RXREADY;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- uartp[MCFUART_UIMR] = info->imr;
-
- info->flags |= ASYNC_INITIALIZED;
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct mcf_serial * info)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!(info->flags & ASYNC_INITIALIZED))
- return;
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("Shutting down serial port %d (irq %d)....\n", info->line,
- info->irq);
-#endif
-
- local_irq_save(flags);
-
- uartp = info->addr;
- uartp[MCFUART_UIMR] = 0; /* mask all interrupts */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
-
- if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
- mcfrs_setsignals(info, 0, 0);
-
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
- }
-
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-}
-
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void mcfrs_change_speed(struct mcf_serial *info)
-{
- volatile unsigned char *uartp;
- unsigned int baudclk, cflag;
- unsigned long flags;
- unsigned char mr1, mr2;
- int i;
-#ifdef CONFIG_M5272
- unsigned int fraction;
-#endif
-
- if (!info->port.tty || !info->port.tty->termios)
- return;
- cflag = info->port.tty->termios->c_cflag;
- if (info->addr == 0)
- return;
-
-#if 0
- printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
-#endif
-
- i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i &= ~CBAUDEX;
- if (i < 1 || i > 4)
- info->port.tty->termios->c_cflag &= ~CBAUDEX;
- else
- i += 15;
- }
- if (i == 0) {
- mcfrs_setsignals(info, 0, -1);
- return;
- }
-
- /* compute the baudrate clock */
-#ifdef CONFIG_M5272
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32;
- fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]);
- fraction *= 16;
- fraction /= (32 * mcfrs_baud_table[i]);
-#else
- baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
-#endif
-
- info->baud = mcfrs_baud_table[i];
-
- mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
- mr2 = 0;
-
- switch (cflag & CSIZE) {
- case CS5: mr1 |= MCFUART_MR1_CS5; break;
- case CS6: mr1 |= MCFUART_MR1_CS6; break;
- case CS7: mr1 |= MCFUART_MR1_CS7; break;
- case CS8:
- default: mr1 |= MCFUART_MR1_CS8; break;
- }
-
- if (cflag & PARENB) {
- if (cflag & CMSPAR) {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYMARK;
- else
- mr1 |= MCFUART_MR1_PARITYSPACE;
- } else {
- if (cflag & PARODD)
- mr1 |= MCFUART_MR1_PARITYODD;
- else
- mr1 |= MCFUART_MR1_PARITYEVEN;
- }
- } else {
- mr1 |= MCFUART_MR1_PARITYNONE;
- }
-
- if (cflag & CSTOPB)
- mr2 |= MCFUART_MR2_STOP2;
- else
- mr2 |= MCFUART_MR2_STOP1;
-
- if (cflag & CRTSCTS) {
- mr1 |= MCFUART_MR1_RXRTS;
- mr2 |= MCFUART_MR2_TXCTS;
- }
-
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- uartp = info->addr;
-
- local_irq_save(flags);
-#if 0
- printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
- mr1, mr2, baudclk);
-#endif
- /*
- Note: pg 12-16 of MCF5206e User's Manual states that a
- software reset should be performed prior to changing
- UMR1,2, UCSR, UACR, bit 7
- */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
- uartp[MCFUART_UMR] = mr1;
- uartp[MCFUART_UMR] = mr2;
- uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */
- uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */
-#ifdef CONFIG_M5272
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
-#endif
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
- mcfrs_setsignals(info, 1, -1);
- local_irq_restore(flags);
- return;
-}
-
-static void mcfrs_flush_chars(struct tty_struct *tty)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars"))
- return;
-
- uartp = (volatile unsigned char *) info->addr;
-
- /*
- * re-enable receiver interrupt
- */
- local_irq_save(flags);
- if ((!(info->imr & MCFUART_UIR_RXREADY)) &&
- (info->flags & ASYNC_INITIALIZED) ) {
- info->imr |= MCFUART_UIR_RXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- }
- local_irq_restore(flags);
-
- if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf)
- return;
-
- /* Enable transmitter */
- local_irq_save(flags);
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-}
-
-static int mcfrs_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
- int c, total = 0;
-
-#if 0
- printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n",
- __FILE__, __LINE__, (int)tty, (int)buf, count);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write"))
- return 0;
-
- if (!tty || !info->xmit_buf)
- return 0;
-
- local_save_flags(flags);
- while (1) {
- local_irq_disable();
- c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1,
- ((int)SERIAL_XMIT_SIZE) - info->xmit_head));
- local_irq_restore(flags);
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
- local_irq_disable();
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- local_irq_disable();
- uartp = info->addr;
- info->imr |= MCFUART_UIR_TXREADY;
- uartp[MCFUART_UIMR] = info->imr;
- local_irq_restore(flags);
-
- return total;
-}
-
-static int mcfrs_write_room(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- int ret;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int mcfrs_chars_in_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer"))
- return 0;
- return info->xmit_cnt;
-}
-
-static void mcfrs_flush_buffer(struct tty_struct *tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer"))
- return;
-
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
-
- tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void mcfrs_throttle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
- return;
-
- if (I_IXOFF(tty))
- info->x_char = STOP_CHAR(tty);
-
- /* Turn off RTS line (do this atomic) */
-}
-
-static void mcfrs_unthrottle(struct tty_struct * tty)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("unthrottle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
-#endif
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- info->x_char = START_CHAR(tty);
- }
-
- /* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct mcf_serial * info,
- struct serial_struct * retinfo)
-{
- struct serial_struct tmp;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = (unsigned int) info->addr;
- tmp.irq = info->irq;
- tmp.flags = info->flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->close_delay;
- tmp.closing_wait = info->closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
-}
-
-static int set_serial_info(struct mcf_serial * info,
- struct serial_struct * new_info)
-{
- struct serial_struct new_serial;
- struct mcf_serial old_info;
- int retval = 0;
-
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.type != info->type) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if (info->count > 1)
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud_base = new_serial.baud_base;
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->type = new_serial.type;
- info->close_delay = new_serial.close_delay;
- info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
- retval = startup(info);
- return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- unsigned char status;
-
- local_irq_save(flags);
- uartp = info->addr;
- status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
- local_irq_restore(flags);
-
- return put_user(status,value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break( struct mcf_serial * info, int duration)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
-
- if (!info->addr)
- return;
- set_current_state(TASK_INTERRUPTIBLE);
- uartp = info->addr;
-
- local_irq_save(flags);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
- schedule_timeout(duration);
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
- local_irq_restore(flags);
-}
-
-static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- return mcfrs_getsignals(info);
-}
-
-static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int rts = -1, dtr = -1;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- mcfrs_setsignals(info, dtr, rts);
-
- return 0;
-}
-
-static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- int retval, error;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, HZ/4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(HZ/10) : HZ/4);
- return 0;
- case TIOCGSERIAL:
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct)))
- return get_serial_info(info,
- (struct serial_struct *) arg);
- return -EFAULT;
- case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- if (access_ok(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int)))
- return get_lsr_info(info, (unsigned int *) arg);
- return -EFAULT;
- case TIOCSERGSTRUCT:
- error = copy_to_user((struct mcf_serial *) arg,
- info, sizeof(struct mcf_serial));
- if (error)
- return -EFAULT;
- return 0;
-
-#ifdef TIOCSET422
- case TIOCSET422: {
- unsigned int val;
- get_user(val, (unsigned int *) arg);
- mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
- break;
- }
- case TIOCGET422: {
- unsigned int val;
- val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
- put_user(val, (unsigned int *) arg);
- break;
- }
-#endif
-
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
- if (tty->termios->c_cflag == old_termios->c_cflag)
- return;
-
- mcfrs_change_speed(info);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- mcfrs_setsignals(info, -1, 1);
-#if 0
- mcfrs_start(tty);
-#endif
- }
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_close()
- *
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void mcfrs_close(struct tty_struct *tty, struct file * filp)
-{
- volatile unsigned char *uartp;
- struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
- unsigned long flags;
-
- if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close"))
- return;
-
- local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
- local_irq_restore(flags);
- return;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
-#endif
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("MCFRS: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
- if (--info->count < 0) {
- printk("MCFRS: bad serial port count for ttyS%d: %d\n",
- info->line, info->count);
- info->count = 0;
- }
- if (info->count) {
- local_irq_restore(flags);
- return;
- }
- info->flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, info->closing_wait);
-
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- info->imr &= ~MCFUART_UIR_RXREADY;
- uartp = info->addr;
- uartp[MCFUART_UIMR] = info->imr;
-
-#if 0
- /* FIXME: do we need to keep this enabled for console?? */
- if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
- /* Do not disable the UART */ ;
- } else
-#endif
- shutdown(info);
- mcfrs_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- info->event = 0;
- info->port.tty = NULL;
-#if 0
- if (tty->ldisc.num != ldiscs[N_TTY].num) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty->ldisc = ldiscs[N_TTY];
- tty->termios->c_line = N_TTY;
- if (tty->ldisc.open)
- (tty->ldisc.open)(tty);
- }
-#endif
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs(info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
- local_irq_restore(flags);
-}
-
-/*
- * mcfrs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void
-mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-#ifdef CONFIG_M5272
-#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */
-
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
- volatile unsigned char *uartp;
- unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent"))
- return;
-
- orig_jiffies = jiffies;
-
- /*
- * Set the check interval to be 1/5 of the approximate time
- * to send the entire fifo, and make it at least 1. The check
- * interval should also be less than the timeout.
- *
- * Note: we have to use pretty tight timings here to satisfy
- * the NIST-PCTS.
- */
- lock_kernel();
-
- fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
- char_time = fifo_time / 5;
- if (char_time == 0)
- char_time = 1;
- if (timeout && timeout < char_time)
- char_time = timeout;
-
- /*
- * Clamp the timeout period at 2 * the time to empty the
- * fifo. Just to be safe, set the minimum at .5 seconds.
- */
- fifo_time *= 2;
- if (fifo_time < (HZ/2))
- fifo_time = HZ/2;
- if (!timeout || timeout > fifo_time)
- timeout = fifo_time;
-
- /*
- * Account for the number of bytes in the UART
- * transmitter FIFO plus any byte being shifted out.
- */
- uartp = (volatile unsigned char *) info->addr;
- for (;;) {
- fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB);
- if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY|
- MCFUART_USR_TXEMPTY)) ==
- MCFUART_USR_TXREADY)
- fifo_cnt++;
- if (fifo_cnt == 0)
- break;
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- unlock_kernel();
-#else
- /*
- * For the other coldfire models, assume all data has been sent
- */
-#endif
-}
-
-/*
- * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void mcfrs_hangup(struct tty_struct *tty)
-{
- struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "mcfrs_hangup"))
- return;
-
- mcfrs_flush_buffer(tty);
- shutdown(info);
- info->event = 0;
- info->count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->port.tty = NULL;
- wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
- struct mcf_serial *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * mcfrs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- info->count--;
- info->blocked_open++;
- while (1) {
- local_irq_disable();
- mcfrs_setsignals(info, 1, 1);
- local_irq_enable();
- current->state = TASK_INTERRUPTIBLE;
- if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: ttyS%d, count = %d\n",
- info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-int mcfrs_open(struct tty_struct *tty, struct file * filp)
-{
- struct mcf_serial *info;
- int retval, line;
-
- line = tty->index;
- if ((line < 0) || (line >= NR_PORTS))
- return -ENODEV;
- info = mcfrs_table + line;
- if (serial_paranoia_check(info, tty->name, "mcfrs_open"))
- return -ENODEV;
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s, count = %d\n", tty->name, info->count);
-#endif
- info->count++;
- tty->driver_data = info;
- info->port.tty = tty;
-
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval)
- return retval;
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("mcfrs_open %s successful...\n", tty->name);
-#endif
- return 0;
-}
-
-/*
- * Based on the line number set up the internal interrupt stuff.
- */
-static void mcfrs_irqinit(struct mcf_serial *info)
-{
-#if defined(CONFIG_M5272)
- volatile unsigned long *icrp;
- volatile unsigned long *portp;
- volatile unsigned char *uartp;
-
- uartp = info->addr;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
-
- switch (info->line) {
- case 0:
- *icrp = 0xe0000000;
- break;
- case 1:
- *icrp = 0x0e000000;
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- /* Enable the output lines for the serial ports */
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
- *portp = (*portp & ~0x000000ff) | 0x00000055;
- portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
- *portp = (*portp & ~0x000003fc) | 0x000002a8;
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x30 + info->line; /* level 6, line based priority */
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
-#if defined(CONFIG_M527x)
- {
- /*
- * External Pin Mask Setting & Enable External Pin for Interface
- * mrcbis@aliceposta.it
- */
- u16 *serpin_enable_mask;
- serpin_enable_mask = (u16 *) (MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *serpin_enable_mask |= UART0_ENABLE_MASK;
- else if (info->line == 1)
- *serpin_enable_mask |= UART1_ENABLE_MASK;
- else if (info->line == 2)
- *serpin_enable_mask |= UART2_ENABLE_MASK;
- }
-#endif
-#if defined(CONFIG_M528x)
- /* make sure PUAPAR is set for UART0 and UART1 */
- if (info->line < 2) {
- volatile unsigned char *portp = (volatile unsigned char *) (MCF_MBAR + MCF5282_GPIO_PUAPAR);
- *portp |= (0x03 << (info->line * 2));
- }
-#endif
-#elif defined(CONFIG_M520x)
- volatile unsigned char *icrp, *uartp;
- volatile unsigned long *imrp;
-
- uartp = info->addr;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_ICR0 + MCFINT_UART0 + info->line);
- *icrp = 0x03;
-
- imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
- MCFINTC_IMRL);
- *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
- if (info->line < 2) {
- unsigned short *uart_par;
- uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART);
- if (info->line == 0)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD0
- | MCF_GPIO_PAR_UART_PAR_URXD0;
- else if (info->line == 1)
- *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD1
- | MCF_GPIO_PAR_UART_PAR_URXD1;
- } else if (info->line == 2) {
- unsigned char *feci2c_par;
- feci2c_par = (unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
- *feci2c_par &= ~0x0F;
- *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
- | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
- }
-#elif defined(CONFIG_M532x)
- volatile unsigned char *uartp;
- uartp = info->addr;
- switch (info->line) {
- case 0:
- MCF_INTC0_ICR26 = 0x3;
- MCF_INTC0_CIMR = 26;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x000F;
- break;
- case 1:
- MCF_INTC0_ICR27 = 0x3;
- MCF_INTC0_CIMR = 27;
- /* GPIO initialization */
- MCF_GPIO_PAR_UART |= 0x0FF0;
- break;
- case 2:
- MCF_INTC0_ICR28 = 0x3;
- MCF_INTC0_CIMR = 28;
- /* GPIOs also must be initalized, depends on board */
- break;
- }
-#else
- volatile unsigned char *icrp, *uartp;
-
- switch (info->line) {
- case 0:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI1;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
- break;
- case 1:
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
- *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
- MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
- break;
- default:
- printk("MCFRS: don't know how to handle UART %d interrupt?\n",
- info->line);
- return;
- }
-
- uartp = info->addr;
- uartp[MCFUART_UIVR] = info->irq;
-#endif
-
- /* Clear mask, so no surprise interrupts. */
- uartp[MCFUART_UIMR] = 0;
-
- if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
- "ColdFire UART", NULL)) {
- printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
- "vector=%d\n", info->line, info->irq);
- }
-
- return;
-}
-
-
-char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
-
-
-/*
- * Serial stats reporting...
- */
-int mcfrs_readproc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- struct mcf_serial *info;
- char str[20];
- int len, sigs, i;
-
- len = sprintf(page, mcfrs_drivername);
- for (i = 0; (i < NR_PORTS); i++) {
- info = &mcfrs_table[i];
- len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
- i, (unsigned int) info->addr, info->irq, info->baud);
- if (info->stats.rx || info->stats.tx)
- len += sprintf((page + len), "tx:%d rx:%d ",
- info->stats.tx, info->stats.rx);
- if (info->stats.rxframing)
- len += sprintf((page + len), "fe:%d ",
- info->stats.rxframing);
- if (info->stats.rxparity)
- len += sprintf((page + len), "pe:%d ",
- info->stats.rxparity);
- if (info->stats.rxbreak)
- len += sprintf((page + len), "brk:%d ",
- info->stats.rxbreak);
- if (info->stats.rxoverrun)
- len += sprintf((page + len), "oe:%d ",
- info->stats.rxoverrun);
-
- str[0] = str[1] = 0;
- if ((sigs = mcfrs_getsignals(info))) {
- if (sigs & TIOCM_RTS)
- strcat(str, "|RTS");
- if (sigs & TIOCM_CTS)
- strcat(str, "|CTS");
- if (sigs & TIOCM_DTR)
- strcat(str, "|DTR");
- if (sigs & TIOCM_CD)
- strcat(str, "|CD");
- }
-
- len += sprintf((page + len), "%s\n", &str[1]);
- }
-
- return(len);
-}
-
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
- printk(mcfrs_drivername);
-}
-
-static const struct tty_operations mcfrs_ops = {
- .open = mcfrs_open,
- .close = mcfrs_close,
- .write = mcfrs_write,
- .flush_chars = mcfrs_flush_chars,
- .write_room = mcfrs_write_room,
- .chars_in_buffer = mcfrs_chars_in_buffer,
- .flush_buffer = mcfrs_flush_buffer,
- .ioctl = mcfrs_ioctl,
- .throttle = mcfrs_throttle,
- .unthrottle = mcfrs_unthrottle,
- .set_termios = mcfrs_set_termios,
- .stop = mcfrs_stop,
- .start = mcfrs_start,
- .hangup = mcfrs_hangup,
- .read_proc = mcfrs_readproc,
- .wait_until_sent = mcfrs_wait_until_sent,
- .tiocmget = mcfrs_tiocmget,
- .tiocmset = mcfrs_tiocmset,
-};
-
-/* mcfrs_init inits the driver */
-static int __init
-mcfrs_init(void)
-{
- struct mcf_serial *info;
- unsigned long flags;
- int i;
-
- /* Setup base handler, and timer table. */
-#ifdef MCFPP_DCD0
- init_timer(&mcfrs_timer_struct);
- mcfrs_timer_struct.function = mcfrs_timer;
- mcfrs_timer_struct.data = 0;
- mcfrs_timer_struct.expires = jiffies + HZ/25;
- add_timer(&mcfrs_timer_struct);
- mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-#endif
- mcfrs_serial_driver = alloc_tty_driver(NR_PORTS);
- if (!mcfrs_serial_driver)
- return -ENOMEM;
-
- show_serial_version();
-
- /* Initialize the tty_driver structure */
- mcfrs_serial_driver->owner = THIS_MODULE;
- mcfrs_serial_driver->name = "ttyS";
- mcfrs_serial_driver->driver_name = "mcfserial";
- mcfrs_serial_driver->major = TTY_MAJOR;
- mcfrs_serial_driver->minor_start = 64;
- mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL;
- mcfrs_serial_driver->init_termios = tty_std_termios;
-
- mcfrs_serial_driver->init_termios.c_cflag =
- mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
- mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW;
-
- tty_set_operations(mcfrs_serial_driver, &mcfrs_ops);
-
- if (tty_register_driver(mcfrs_serial_driver)) {
- printk("MCFRS: Couldn't register serial driver\n");
- put_tty_driver(mcfrs_serial_driver);
- return(-EBUSY);
- }
-
- local_irq_save(flags);
-
- /*
- * Configure all the attached serial ports.
- */
- for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
- info->magic = SERIAL_MAGIC;
- info->line = i;
- info->port.tty = NULL;
- info->custom_divisor = 16;
- info->close_delay = 50;
- info->closing_wait = 3000;
- info->x_char = 0;
- info->event = 0;
- info->count = 0;
- info->blocked_open = 0;
- INIT_WORK(&info->tqueue, mcfrs_offintr);
- INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
-
- info->imr = 0;
- mcfrs_setsignals(info, 0, 0);
- mcfrs_irqinit(info);
-
- printk("ttyS%d at 0x%04x (irq = %d)", info->line,
- (unsigned int) info->addr, info->irq);
- printk(" is a builtin ColdFire UART\n");
- }
-
- local_irq_restore(flags);
- return 0;
-}
-
-module_init(mcfrs_init);
-
-/****************************************************************************/
-/* Serial Console */
-/****************************************************************************/
-
-/*
- * Quick and dirty UART initialization, for console output.
- */
-
-void mcfrs_init_console(void)
-{
- volatile unsigned char *uartp;
- unsigned int clk;
-
- /*
- * Reset UART, get it into known state...
- */
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
- uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
-
- /*
- * Set port for defined baud , 8 data bits, 1 stop bit, no parity.
- */
- uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
- uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
-
-#ifdef CONFIG_M5272
-{
- /*
- * For the MCF5272, also compute the baudrate fraction.
- */
- int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
- fraction *= 16;
- fraction /= (32 * mcfrs_console_baud);
- uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
- clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
-}
-#else
- clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
-#endif
-
- uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
- uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
- uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
- uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-
- mcfrs_console_inited++;
- return;
-}
-
-
-/*
- * Setup for console. Argument comes from the boot command line.
- */
-
-int mcfrs_console_setup(struct console *cp, char *arg)
-{
- int i, n = CONSOLE_BAUD_RATE;
-
- if (!cp)
- return(-1);
-
- if (!strncmp(cp->name, "ttyS", 4))
- mcfrs_console_port = cp->index;
- else if (!strncmp(cp->name, "cua", 3))
- mcfrs_console_port = cp->index;
- else
- return(-1);
-
- if (arg)
- n = simple_strtoul(arg,NULL,0);
- for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
- if (mcfrs_baud_table[i] == n)
- break;
- if (i < MCFRS_BAUD_TABLE_SIZE) {
- mcfrs_console_baud = n;
- mcfrs_console_cbaud = 0;
- if (i > 15) {
- mcfrs_console_cbaud |= CBAUDEX;
- i -= 15;
- }
- mcfrs_console_cbaud |= i;
- }
- mcfrs_init_console(); /* make sure baud rate changes */
- return(0);
-}
-
-
-static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return mcfrs_serial_driver;
-}
-
-
-/*
- * Output a single character, using UART polled mode.
- * This is used for console output.
- */
-
-int mcfrs_put_char(char ch)
-{
- volatile unsigned char *uartp;
- unsigned long flags;
- int i;
-
- uartp = (volatile unsigned char *) (MCF_MBAR +
- (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
- local_irq_save(flags);
- for (i = 0; (i < 0x10000); i++) {
- if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
- break;
- }
- if (i < 0x10000) {
- uartp[MCFUART_UTB] = ch;
- for (i = 0; (i < 0x10000); i++)
- if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
- break;
- }
- if (i >= 0x10000)
- mcfrs_init_console(); /* try and get it back */
- local_irq_restore(flags);
-
- return 1;
-}
-
-
-/*
- * rs_console_write is registered for printk output.
- */
-
-void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
-{
- if (!mcfrs_console_inited)
- mcfrs_init_console();
- while (len-- > 0) {
- if (*p == '\n')
- mcfrs_put_char('\r');
- mcfrs_put_char(*p++);
- }
-}
-
-/*
- * declare our consoles
- */
-
-struct console mcfrs_console = {
- .name = "ttyS",
- .write = mcfrs_console_write,
- .device = mcfrs_console_device,
- .setup = mcfrs_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init mcfrs_console_init(void)
-{
- register_console(&mcfrs_console);
- return 0;
-}
-
-console_initcall(mcfrs_console_init);
-
-/****************************************************************************/
diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h
deleted file mode 100644
index 56420e2..0000000
--- a/drivers/serial/mcfserial.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (c) 1999 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (c) 2002 SnapGear Inc., <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
- */
-#ifndef _MCF_SERIAL_H
-#define _MCF_SERIAL_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/*
- * Define a local serial stats structure.
- */
-
-struct mcf_stats {
- unsigned int rx;
- unsigned int tx;
- unsigned int rxbreak;
- unsigned int rxframing;
- unsigned int rxparity;
- unsigned int rxoverrun;
-};
-
-
-/*
- * This is our internal structure for each serial port's state.
- * Each serial port has one of these structures associated with it.
- */
-
-struct mcf_serial {
- int magic;
- volatile unsigned char *addr; /* UART memory address */
- int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- struct tty_struct *tty;
- unsigned char imr; /* Software imr register */
- unsigned int baud;
- int sigs;
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int baud_base;
- int close_delay;
- unsigned short closing_wait;
- unsigned short closing_wait2;
- unsigned long event;
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- struct mcf_stats stats;
- struct work_struct tqueue;
- struct work_struct tqueue_hangup;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
-
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _MCF_SERIAL_H */
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98..6bdf336 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2051,7 +2051,8 @@
"transmitter\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
- drv->dev_name, port->line);
+ drv->dev_name,
+ drv->tty_driver->name_base + port->line);
ops->shutdown(port);
}
@@ -2154,12 +2155,11 @@
switch (port->iotype) {
case UPIO_PORT:
- snprintf(address, sizeof(address),
- "I/O 0x%x", port->iobase);
+ snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase);
break;
case UPIO_HUB6:
snprintf(address, sizeof(address),
- "I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+ "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
break;
case UPIO_MEM:
case UPIO_MEM32:
@@ -2177,7 +2177,9 @@
printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
port->dev ? port->dev->bus_id : "",
port->dev ? ": " : "",
- drv->dev_name, port->line, address, port->irq, uart_type(port));
+ drv->dev_name,
+ drv->tty_driver->name_base + port->line,
+ address, port->irq, uart_type(port));
}
static void
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 79ea98c..99fb7dc 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,7 +272,7 @@
* 64 bytes, to ensure I do not get throttled.
* Ask USB mailing list for better aproach.
*/
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
schedule_work(&priv->rx_work);
@@ -283,12 +283,13 @@
count = min(64, serial_buf_data_avail(priv->rx_buf));
if (count <= 0)
- return; /* We have finished sending everything. */
+ goto out; /* We have finished sending everything. */
tty_prepare_flip_string(tty, &data, count);
if (!data) {
- err("%s- kzalloc(%d) failed.", __func__, count);
- return;
+ dev_err(&port->dev, "%s- kzalloc(%d) failed.",
+ __func__, count);
+ goto out;
}
serial_buf_get(priv->rx_buf, data, count);
@@ -297,7 +298,8 @@
if (serial_buf_data_avail(priv->rx_buf))
schedule_work(&priv->rx_work);
-
+out:
+ tty_kref_put(tty);
return;
}
/* End of private methods */
@@ -495,7 +497,7 @@
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
if (urb->actual_length <= 2) {
/* This is an incomplete package */
@@ -527,6 +529,7 @@
}
aircable_read(&priv->rx_work);
}
+ tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2ebe06c..1913bc7 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -322,7 +322,7 @@
* to look in to this before committing any code.
*/
if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
/* Overrun Error */
if (priv->last_lsr & BELKIN_SA_LSR_OE) {
}
@@ -335,6 +335,7 @@
/* Break Indicator */
if (priv->last_lsr & BELKIN_SA_LSR_BI) {
}
+ tty_kref_put(tty);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index e980766..5b20de1 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -117,7 +117,7 @@
}
port = serial->port[0];
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
info->port = port;
@@ -143,7 +143,7 @@
}
memset(&dummy, 0, sizeof(struct ktermios));
tty->termios = termios;
- port->port.tty = tty;
+ tty_port_tty_set(&port->port, tty);
}
/* only call the device specific open if this
@@ -163,7 +163,7 @@
tty_termios_encode_baud_rate(termios, baud, baud);
serial->type->set_termios(tty, port, &dummy);
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
kfree(termios);
kfree(tty);
}
@@ -176,7 +176,7 @@
return retval;
free_termios:
kfree(termios);
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
free_tty:
kfree(tty);
reset_open_count:
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b4d7235..94ef36c 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -384,7 +384,7 @@
return;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - ignoring since device not open\n", __func__);
return;
@@ -394,6 +394,7 @@
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
spin_lock(&priv->lock);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 22837a3..f3514a9 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1286,7 +1286,7 @@
}
spin_unlock_irqrestore(&priv->lock, flags);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
@@ -1362,7 +1362,7 @@
data[i]);
tty_insert_flip_char(tty, data[i], tty_flag);
}
- tty_flip_buffer_push(port->port.tty);
+ tty_flip_buffer_push(tty);
}
spin_lock_irqsave(&priv->lock, flags);
@@ -1371,6 +1371,7 @@
spin_unlock_irqrestore(&priv->lock, flags);
continue_read:
+ tty_kref_put(tty);
/* Continue trying to always read... unless the port has closed. */
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 240aad1..5756ac6 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -604,7 +604,9 @@
static void digi_wakeup_write(struct usb_serial_port *port)
{
- tty_wakeup(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
@@ -1668,7 +1670,7 @@
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty;
struct digi_port *priv = usb_get_serial_port_data(port);
int opcode = ((unsigned char *)urb->transfer_buffer)[0];
int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1692,6 +1694,7 @@
return -1;
}
+ tty = tty_port_tty_get(&port->port);
spin_lock(&priv->dp_port_lock);
/* check for throttle; if set, do not resubmit read urb */
@@ -1735,6 +1738,7 @@
}
}
spin_unlock(&priv->dp_port_lock);
+ tty_kref_put(tty);
if (opcode == DIGI_CMD_RECEIVE_DISABLE)
dbg("%s: got RECEIVE_DISABLE", __func__);
@@ -1760,6 +1764,7 @@
struct usb_serial_port *port = urb->context;
struct usb_serial *serial = port->serial;
+ struct tty_struct *tty;
struct digi_port *priv = usb_get_serial_port_data(port);
int opcode, line, status, val;
int i;
@@ -1787,10 +1792,11 @@
if (priv == NULL)
return -1;
+ tty = tty_port_tty_get(&port->port);
rts = 0;
if (port->port.count)
- rts = port->port.tty->termios->c_cflag & CRTSCTS;
-
+ rts = tty->termios->c_cflag & CRTSCTS;
+
if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
@@ -1798,14 +1804,14 @@
priv->dp_modem_signals |= TIOCM_CTS;
/* port must be open to use tty struct */
if (rts) {
- port->port.tty->hw_stopped = 0;
+ tty->hw_stopped = 0;
digi_wakeup_write(port);
}
} else {
priv->dp_modem_signals &= ~TIOCM_CTS;
/* port must be open to use tty struct */
if (rts)
- port->port.tty->hw_stopped = 1;
+ tty->hw_stopped = 1;
}
if (val & DIGI_READ_INPUT_SIGNALS_DSR)
priv->dp_modem_signals |= TIOCM_DSR;
@@ -1830,6 +1836,7 @@
} else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
wake_up_interruptible(&priv->dp_flush_wait);
}
+ tty_kref_put(tty);
}
return 0;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index a6ab5b5..1072e84 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -33,9 +33,8 @@
* Moved MOD_DEC_USE_COUNT to end of empeg_close().
*
* (12/03/2000) gb
- * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to
- * empeg_open(). This notifies the tty driver that the termios have
- * changed.
+ * Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
+ * This notifies the tty driver that the termios have changed.
*
* (11/13/2000) gb
* Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
@@ -354,7 +353,7 @@
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
@@ -362,6 +361,7 @@
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc93b5..c2ac129 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -860,7 +860,7 @@
kfree(buf);
if (rv < 0) {
- err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+ dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
__func__,
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
@@ -1808,7 +1808,7 @@
if (port->port.count <= 0)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
@@ -1817,7 +1817,7 @@
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
- return;
+ goto out;
}
if (urb != port->read_urb)
@@ -1827,7 +1827,7 @@
/* This will happen at close every time so it is a dbg not an
err */
dbg("(this is ok on close) nonzero read bulk status received: %d", status);
- return;
+ goto out;
}
/* count data bytes, but not status bytes */
@@ -1838,7 +1838,8 @@
spin_unlock_irqrestore(&priv->rx_lock, flags);
ftdi_process_read(&priv->rx_work.work);
-
+out:
+ tty_kref_put(tty);
} /* ftdi_read_bulk_callback */
@@ -1863,7 +1864,7 @@
if (port->port.count <= 0)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
@@ -1872,13 +1873,13 @@
priv = usb_get_serial_port_data(port);
if (!priv) {
dbg("%s - bad port private data pointer - exiting", __func__);
- return;
+ goto out;
}
urb = port->read_urb;
if (!urb) {
dbg("%s - bad read_urb pointer - exiting", __func__);
- return;
+ goto out;
}
data = urb->transfer_buffer;
@@ -2020,7 +2021,7 @@
schedule_delayed_work(&priv->rx_work, 1);
else
dbg("%s - port is closed", __func__);
- return;
+ goto out;
}
/* urb is completely processed */
@@ -2041,6 +2042,8 @@
err("%s - failed resubmitting read urb, error %d",
__func__, result);
}
+out:
+ tty_kref_put(tty);
} /* ftdi_process_read */
@@ -2256,7 +2259,7 @@
0, 0,
buf, 1, WDR_TIMEOUT);
if (ret < 0) {
- err("%s Could not get modem status of device - err: %d", __func__,
+ dbg("%s Could not get modem status of device - err: %d", __func__,
ret);
return ret;
}
@@ -2275,7 +2278,7 @@
0, priv->interface,
buf, 2, WDR_TIMEOUT);
if (ret < 0) {
- err("%s Could not get modem status of device - err: %d", __func__,
+ dbg("%s Could not get modem status of device - err: %d", __func__,
ret);
return ret;
}
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index d953820..2ad0569 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -276,7 +276,7 @@
static void send_to_tty(struct usb_serial_port *port,
char *data, unsigned int actual_length)
{
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
if (tty && actual_length) {
@@ -287,6 +287,7 @@
tty_insert_flip_string(tty, data, actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index fe84c88..814909f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -330,7 +330,7 @@
static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
{
struct urb *urb = port->read_urb;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
int room;
/* Push data to tty */
@@ -341,6 +341,7 @@
tty_flip_buffer_push(tty);
}
}
+ tty_kref_put(tty);
resubmit_read_urb(port, GFP_ATOMIC);
}
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bfa508d..611f97f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -600,6 +600,7 @@
struct edgeport_serial *edge_serial = urb->context;
struct edgeport_port *edge_port;
struct usb_serial_port *port;
+ struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int length = urb->actual_length;
int bytes_avail;
@@ -675,9 +676,12 @@
/* tell the tty driver that something
has changed */
- if (edge_port->port->port.tty)
- tty_wakeup(edge_port->port->port.tty);
-
+ tty = tty_port_tty_get(
+ &edge_port->port->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
/* Since we have more credit, check
if more data can be sent */
send_more_port_data(edge_serial,
@@ -778,13 +782,14 @@
__func__, status);
}
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
if (tty && edge_port->open) {
/* let the tty driver wakeup if it has a special
write_wakeup function */
tty_wakeup(tty);
}
+ tty_kref_put(tty);
/* Release the Write URB */
edge_port->write_in_progress = false;
@@ -826,11 +831,12 @@
}
/* Get pointer to tty */
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
/* tell the tty driver that something has changed */
if (tty && edge_port->open)
tty_wakeup(tty);
+ tty_kref_put(tty);
/* we have completed the command */
edge_port->commandPending = false;
@@ -1932,11 +1938,13 @@
edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port->open) {
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(
+ &edge_port->port->port);
if (tty) {
dbg("%s - Sending %d bytes to TTY for port %d",
__func__, rxLen, edge_serial->rxPort);
edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
+ tty_kref_put(tty);
}
edge_port->icount.rx += rxLen;
}
@@ -1971,6 +1979,7 @@
{
struct usb_serial_port *port;
struct edgeport_port *edge_port;
+ struct tty_struct *tty;
__u8 code = edge_serial->rxStatusCode;
/* switch the port pointer to the one being currently talked about */
@@ -2020,10 +2029,12 @@
/* send the current line settings to the port so we are
in sync with any further termios calls */
- /* FIXME: locking on tty */
- if (edge_port->port->port.tty)
- change_port_settings(edge_port->port->port.tty,
- edge_port, edge_port->port->port.tty->termios);
+ tty = tty_port_tty_get(&edge_port->port->port);
+ if (tty) {
+ change_port_settings(tty,
+ edge_port, tty->termios);
+ tty_kref_put(tty);
+ }
/* we have completed the open */
edge_port->openPending = false;
@@ -2163,10 +2174,14 @@
}
/* Place LSR data byte into Rx buffer */
- if (lsrData && edge_port->port->port.tty)
- edge_tty_recv(&edge_port->port->dev,
- edge_port->port->port.tty, &data, 1);
-
+ if (lsrData) {
+ struct tty_struct *tty =
+ tty_port_tty_get(&edge_port->port->port);
+ if (tty) {
+ edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+ tty_kref_put(tty);
+ }
+ }
/* update input line counters */
icount = &edge_port->icount;
if (newLsr & LSR_BREAK)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index cb4c543..541dd8e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -572,7 +572,7 @@
int flush)
{
int baud_rate;
- struct tty_struct *tty = port->port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port->port);
wait_queue_t wait;
unsigned long flags;
@@ -599,6 +599,7 @@
if (flush)
edge_buf_clear(port->ep_out_buf);
spin_unlock_irqrestore(&port->ep_lock, flags);
+ tty_kref_put(tty);
/* wait for data to drain from the device */
timeout += jiffies;
@@ -1554,7 +1555,7 @@
/* Save the new modem status */
edge_port->shadow_msr = msr & 0xf0;
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
/* handle CTS flow control */
if (tty && C_CRTSCTS(tty)) {
if (msr & EDGEPORT_MSR_CTS) {
@@ -1564,6 +1565,7 @@
tty->hw_stopped = 1;
}
}
+ tty_kref_put(tty);
return;
}
@@ -1574,6 +1576,7 @@
struct async_icount *icount;
__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
LSR_FRM_ERR | LSR_BREAK));
+ struct tty_struct *tty;
dbg("%s - %02x", __func__, new_lsr);
@@ -1587,8 +1590,13 @@
new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
/* Place LSR data byte into Rx buffer */
- if (lsr_data && edge_port->port->port.tty)
- edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+ if (lsr_data) {
+ tty = tty_port_tty_get(&edge_port->port->port);
+ if (tty) {
+ edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+ tty_kref_put(tty);
+ }
+ }
/* update input line counters */
icount = &edge_port->icount;
@@ -1749,7 +1757,7 @@
++data;
}
- tty = edge_port->port->port.tty;
+ tty = tty_port_tty_get(&edge_port->port->port);
if (tty && urb->actual_length) {
usb_serial_debug_data(debug, &edge_port->port->dev,
__func__, urb->actual_length, data);
@@ -1761,6 +1769,7 @@
urb->actual_length);
edge_port->icount.rx += urb->actual_length;
}
+ tty_kref_put(tty);
exit:
/* continue read unless stopped */
@@ -1796,6 +1805,7 @@
struct usb_serial_port *port = urb->context;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status = urb->status;
+ struct tty_struct *tty;
dbg("%s - port %d", __func__, port->number);
@@ -1818,7 +1828,9 @@
}
/* send any buffered data */
- edge_send(port->port.tty);
+ tty = tty_port_tty_get(&port->port);
+ edge_send(tty);
+ tty_kref_put(tty);
}
static int edge_open(struct tty_struct *tty,
@@ -1876,7 +1888,7 @@
/* set up the port settings */
if (tty)
- edge_set_termios(tty, port, port->port.tty->termios);
+ edge_set_termios(tty, port, tty->termios);
/* open up the port */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd9a2e13..2affa9c 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -764,13 +764,14 @@
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
bytes_in += urb->actual_length;
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a842025..480cac2 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -170,12 +170,13 @@
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index e59155c..45d4043 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -465,11 +465,12 @@
ir_baud = *data & 0x0f;
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/*
* No break here.
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ddff37f..53710aa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -629,13 +629,14 @@
}
dbg("%s - %i chars to write", __func__, urb->actual_length);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (data == NULL)
dbg("%s - data is NULL !!!", __func__);
if (tty && urb->actual_length && data) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
iuu_led_activity_on(urb);
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 704716f..15447af 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -430,7 +430,7 @@
}
port = urb->context;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
/* 0x80 bit is error flag */
if ((data[0] & 0x80) == 0) {
@@ -459,6 +459,7 @@
}
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
@@ -513,6 +514,7 @@
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
+ struct tty_struct *tty;
int old_dcd_state, err;
int status = urb->status;
@@ -553,12 +555,11 @@
p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -604,11 +605,12 @@
p_priv = usb_get_serial_port_data(port);
data = urb->transfer_buffer;
- tty = port->port.tty;
- if (urb->actual_length) {
+ tty =tty_port_tty_get(&port->port);
+ if (tty && urb->actual_length) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
@@ -652,6 +654,7 @@
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
+ struct tty_struct *tty;
int old_dcd_state;
int status = urb->status;
@@ -689,12 +692,11 @@
p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if( old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -785,12 +787,11 @@
p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -827,7 +828,7 @@
}
port = urb->context;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
/* 0x80 bit is error flag */
if ((data[0] & 0x80) == 0) {
@@ -850,6 +851,7 @@
}
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
urb->dev = port->serial->dev;
@@ -893,7 +895,7 @@
return;
}
port = serial->port[data[i++]];
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
len = data[i++];
/* 0x80 bit is error flag */
@@ -927,6 +929,7 @@
}
if (port->port.count)
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
}
@@ -967,8 +970,8 @@
port = urb->context;
p_priv = usb_get_serial_port_data(port);
- tty = port->port.tty;
if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
/* if current mode is DMA, looks like usa28 format
otherwise looks like usa26 data format */
@@ -1004,6 +1007,7 @@
}
}
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -1025,6 +1029,7 @@
struct usb_serial *serial;
struct usb_serial_port *port;
struct keyspan_port_private *p_priv;
+ struct tty_struct *tty;
int old_dcd_state, err;
int status = urb->status;
@@ -1053,12 +1058,11 @@
p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
p_priv->ri_state = ((msg->ri) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -1130,12 +1134,11 @@
p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty)
- && old_dcd_state != p_priv->dcd_state) {
- if (old_dcd_state)
- tty_hangup(port->port.tty);
- /* else */
- /* wake_up_interruptible(&p_priv->open_wait); */
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/* Resubmit urb so we continue receiving */
@@ -1332,7 +1335,7 @@
stop_urb(p_priv->out_urbs[i]);
}
}
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
}
/* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 040040a..99e9a14 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -172,8 +172,9 @@
struct keyspan_pda_private *priv =
container_of(work, struct keyspan_pda_private, wakeup_work);
struct usb_serial_port *port = priv->port;
-
- tty_wakeup(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ tty_wakeup(tty);
+ tty_kref_put(tty);
}
static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -205,7 +206,7 @@
static void keyspan_pda_rx_interrupt(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
unsigned char *data = urb->transfer_buffer;
int retval;
int status = urb->status;
@@ -222,7 +223,7 @@
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, status);
- return;
+ goto out;
default:
dbg("%s - nonzero urb status received: %d",
__func__, status);
@@ -261,8 +262,11 @@
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
- err("%s - usb_submit_urb failed with result %d",
- __func__, retval);
+ dev_err(&port->dev,
+ "%s - usb_submit_urb failed with result %d",
+ __func__, retval);
+out:
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b84dddc..ff3a07f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -658,7 +658,7 @@
} else {
int bytes_sent = ((__u8 *) data)[0] +
((unsigned int) ((__u8 *) data)[1] << 8);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
/* we should immediately resubmit the URB, before attempting
* to pass the data on to the tty layer. But that needs locking
* against re-entry an then mixed-up data because of
@@ -679,6 +679,7 @@
tty_buffer_request_room(tty, bytes_sent);
tty_insert_flip_string(tty, data + 2, bytes_sent);
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
/* again lockless, but debug info only */
priv->bytes_in += bytes_sent;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index deba28ec..cfcf37c 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -383,7 +383,7 @@
return;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
/* BEGIN DEBUG */
@@ -405,6 +405,7 @@
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 0ded8bd..9b2cef8 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -563,10 +563,11 @@
* Work-a-round: handle the 'usual' bulk-in pipe here
*/
if (urb->transfer_buffer_length > 2) {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
goto exit;
}
@@ -591,7 +592,7 @@
* to look in to this before committing any code.
*/
if (priv->last_lsr & MCT_U232_LSR_ERR) {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
/* Overrun Error */
if (priv->last_lsr & MCT_U232_LSR_OE) {
}
@@ -604,6 +605,7 @@
/* Break Indicator */
if (priv->last_lsr & MCT_U232_LSR_BI) {
}
+ tty_kref_put(tty);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7c4917d..7b538ca 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -216,12 +216,13 @@
data = urb->transfer_buffer;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
if (!port->read_urb) {
dbg("URB KILLED !!!");
@@ -262,10 +263,11 @@
dbg("Entering .........");
- tty = mos7720_port->port->port.tty;
+ tty = tty_port_tty_get(&mos7720_port->port->port);
if (tty && mos7720_port->open)
tty_wakeup(tty);
+ tty_kref_put(tty);
}
/*
@@ -1267,29 +1269,6 @@
return 0;
}
-/*
- * get_number_bytes_avail - get number of bytes available
- *
- * Purpose: Let user call ioctl to get the count of number of bytes available.
- */
-static int get_number_bytes_avail(struct moschip_port *mos7720_port,
- unsigned int __user *value)
-{
- unsigned int result = 0;
- struct tty_struct *tty = mos7720_port->port->port.tty;
-
- if (!tty)
- return -ENOIOCTLCMD;
-
- result = tty->read_cnt;
-
- dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result);
- if (copy_to_user(value, &result, sizeof(int)))
- return -EFAULT;
-
- return -ENOIOCTLCMD;
-}
-
static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
unsigned int __user *value)
{
@@ -1409,13 +1388,6 @@
dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
- case TIOCINQ:
- /* return number of bytes available */
- dbg("%s (%d) TIOCINQ", __func__, port->number);
- return get_number_bytes_avail(mos7720_port,
- (unsigned int __user *)arg);
- break;
-
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(tty, mos7720_port,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 09d8206..60543d7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -709,12 +709,13 @@
dbg("%s", "Entering ........... \n");
if (urb->actual_length) {
- tty = mos7840_port->port->port.tty;
+ tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
dbg(" %s \n", data);
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
mos7840_port->icount.rx += urb->actual_length;
smp_wmb();
@@ -773,10 +774,10 @@
dbg("%s \n", "Entering .........");
- tty = mos7840_port->port->port.tty;
-
+ tty = tty_port_tty_get(&mos7840_port->port->port);
if (tty && mos7840_port->open)
tty_wakeup(tty);
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index d673653..bcdcbb8 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -64,12 +64,13 @@
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
exit:
result = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index ae8e227..c4d70b0 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -172,7 +172,7 @@
dbg("%s - port %d", __func__, port->number);
wport = serial->port[1];
- wport->port.tty = tty; /* FIXME */
+ tty_port_tty_set(&wport->port, tty);
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
@@ -229,9 +229,11 @@
}
if (urb->actual_length && header->oh_len) {
- tty_insert_flip_string(port->port.tty,
- data + OMNINET_DATAOFFSET, header->oh_len);
- tty_flip_buffer_push(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET,
+ header->oh_len);
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
}
/* Continue trying to always read */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 73f8277..6b1727e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -571,14 +571,14 @@
dbg("%s: nonzero status: %d on endpoint %02x.",
__func__, status, endpoint);
} else {
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
- } else {
+ } else
dbg("%s: empty read urb received", __func__);
- }
+ tty_kref_put(tty);
/* Resubmit urb so we continue receiving */
if (port->port.count && status != -ESHUTDOWN) {
@@ -647,9 +647,13 @@
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty) &&
- old_dcd_state && !portdata->dcd_state)
- tty_hangup(port->port.tty);
+ if (old_dcd_state && !portdata->dcd_state) {
+ struct tty_struct *tty =
+ tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
} else {
dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
@@ -793,7 +797,7 @@
for (i = 0; i < N_OUT_URB; i++)
usb_kill_urb(portdata->out_urbs[i]);
}
- port->port.tty = NULL; /* FIXME */
+ tty_port_tty_set(&port->port, NULL);
}
/* Helper functions used by option_setup_urbs */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 81db571..ba551f0 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -224,10 +224,6 @@
struct usb_serial_port *port; /* USB port with which associated */
};
-#undef dbg
-/* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */
-#define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg)
-
static void setup_line(struct work_struct *work)
{
struct oti6858_private *priv = container_of(work,
@@ -1002,11 +998,12 @@
return;
}
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty != NULL && urb->actual_length > 0) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* schedule the interrupt urb if we are still open */
if (port->port.count != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1ede144..9084378 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -154,7 +154,6 @@
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
- u8 termios_initialized;
enum pl2303_type type;
};
@@ -526,16 +525,6 @@
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
/* The PL2303 is reported to lose bytes if you change
serial settings even to the same values as before. Thus
we actually need to filter in this specific case */
@@ -1057,7 +1046,7 @@
tty_flag = TTY_FRAME;
dbg("%s - tty_flag = %d", __func__, tty_flag);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
@@ -1067,7 +1056,7 @@
tty_insert_flip_char(tty, data[i], tty_flag);
tty_flip_buffer_push(tty);
}
-
+ tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
urb->dev = port->serial->dev;
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index def52d0..72903ac 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -217,6 +217,7 @@
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
unsigned char length = urb->actual_length;
+ struct tty_struct *tty;
int result;
int status = urb->status;
@@ -242,6 +243,7 @@
printk("\n");
}
#endif
+ tty = tty_port_tty_get(&port->port);
if (safe) {
__u16 fcs;
fcs = fcs_compute10(data, length, CRC10_INITFCS);
@@ -250,9 +252,9 @@
if (actual_length <= (length - 2)) {
info("%s - actual: %d", __func__,
actual_length);
- tty_insert_flip_string(port->port.tty,
+ tty_insert_flip_string(tty,
data, actual_length);
- tty_flip_buffer_push(port->port.tty);
+ tty_flip_buffer_push(tty);
} else {
err("%s - inconsistent lengths %d:%d",
__func__, actual_length, length);
@@ -261,9 +263,10 @@
err("%s - bad CRC %x", __func__, fcs);
}
} else {
- tty_insert_flip_string(port->port.tty, data, length);
- tty_flip_buffer_push(port->port.tty);
+ tty_insert_flip_string(tty, data, length);
+ tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Continue trying to always read */
usb_fill_bulk_urb(urb, port->serial->dev,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea1a103..8b9eaf3 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -440,14 +440,14 @@
dbg("%s: nonzero status: %d on endpoint %02x.",
__func__, status, endpoint);
} else {
- tty = port->port.tty;
if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
- } else {
+ tty_kref_put(tty);
+ } else
dbg("%s: empty read urb received", __func__);
- }
/* Resubmit urb so we continue receiving */
if (port->port.count && status != -ESHUTDOWN) {
@@ -485,6 +485,7 @@
unsigned char signals = *((unsigned char *)
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
+ struct tty_struct *tty;
dbg("%s: signal x%x", __func__, signals);
@@ -494,9 +495,11 @@
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
- if (port->port.tty && !C_CLOCAL(port->port.tty) &&
+ tty = tty_port_tty_get(&port->port);
+ if (tty && !C_CLOCAL(tty) &&
old_dcd_state && !portdata->dcd_state)
- tty_hangup(port->port.tty);
+ tty_hangup(tty);
+ tty_kref_put(tty);
} else {
dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
@@ -616,8 +619,7 @@
}
usb_kill_urb(port->interrupt_in_urb);
-
- port->port.tty = NULL; /* FIXME */
+ tty_port_tty_set(&port->port, NULL);
}
static int sierra_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 283cf6b..1533d6e 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -755,7 +755,7 @@
tty_flag = TTY_FRAME;
dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length + 1);
/* overrun is special, not associated with a char */
@@ -765,6 +765,7 @@
tty_insert_flip_char(tty, data[i], tty_flag);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
/* Schedule the next read _if_ we are still open */
if (port->port.count) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9a3e495..c90237d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -179,7 +179,7 @@
static int ti_get_lsr(struct ti_port *tport);
static int ti_get_serial_info(struct ti_port *tport,
struct serial_struct __user *ret_arg);
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg);
static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
@@ -857,8 +857,8 @@
(struct serial_struct __user *)arg);
case TIOCSSERIAL:
dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
- return ti_set_serial_info(tport,
- (struct serial_struct __user *)arg);
+ return ti_set_serial_info(tty, tport,
+ (struct serial_struct __user *)arg);
case TIOCMIWAIT:
dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = tport->tp_icount;
@@ -1211,6 +1211,7 @@
struct device *dev = &urb->dev->dev;
int status = urb->status;
int retval = 0;
+ struct tty_struct *tty;
dbg("%s", __func__);
@@ -1239,20 +1240,22 @@
return;
}
- if (port->port.tty && urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty && urb->actual_length) {
usb_serial_debug_data(debug, dev, __func__,
urb->actual_length, urb->transfer_buffer);
if (!tport->tp_is_open)
dbg("%s - port closed, dropping data", __func__);
else
- ti_recv(&urb->dev->dev, port->port.tty,
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
spin_lock(&tport->tp_lock);
tport->tp_icount.rx += urb->actual_length;
spin_unlock(&tport->tp_lock);
+ tty_kref_put(tty);
}
exit:
@@ -1330,7 +1333,7 @@
{
int count, result;
struct usb_serial_port *port = tport->tp_port;
- struct tty_struct *tty = port->port.tty; /* FIXME */
+ struct tty_struct *tty = tty_port_tty_get(&port->port); /* FIXME */
unsigned long flags;
@@ -1338,19 +1341,15 @@
spin_lock_irqsave(&tport->tp_lock, flags);
- if (tport->tp_write_urb_in_use) {
- spin_unlock_irqrestore(&tport->tp_lock, flags);
- return;
- }
+ if (tport->tp_write_urb_in_use)
+ goto unlock;
count = ti_buf_get(tport->tp_write_buf,
port->write_urb->transfer_buffer,
port->bulk_out_size);
- if (count == 0) {
- spin_unlock_irqrestore(&tport->tp_lock, flags);
- return;
- }
+ if (count == 0)
+ goto unlock;
tport->tp_write_urb_in_use = 1;
@@ -1380,7 +1379,13 @@
/* more room in the buffer for new writes, wakeup */
if (tty)
tty_wakeup(tty);
+ tty_kref_put(tty);
wake_up_interruptible(&tport->tp_write_wait);
+ return;
+unlock:
+ spin_unlock_irqrestore(&tport->tp_lock, flags);
+ tty_kref_put(tty);
+ return;
}
@@ -1464,20 +1469,16 @@
}
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg)
{
- struct usb_serial_port *port = tport->tp_port;
struct serial_struct new_serial;
if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- /* FIXME */
- if (port->port.tty)
- port->port.tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
return 0;
@@ -1510,7 +1511,7 @@
tport->tp_msr = msr & TI_MSR_MASK;
/* handle CTS flow control */
- tty = tport->tp_port->port.tty;
+ tty = tty_port_tty_get(&tport->tp_port->port);
if (tty && C_CRTSCTS(tty)) {
if (msr & TI_MSR_CTS) {
tty->hw_stopped = 0;
@@ -1519,6 +1520,7 @@
tty->hw_stopped = 1;
}
}
+ tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4f7f9e3..e7d4246 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -214,7 +214,7 @@
/* set up our port structure making the tty driver
* remember our port object, and us it */
tty->driver_data = port;
- port->port.tty = tty;
+ tty_port_tty_set(&port->port, tty);
if (port->port.count == 1) {
@@ -246,7 +246,7 @@
bailout_mutex_unlock:
port->port.count = 0;
tty->driver_data = NULL;
- port->port.tty = NULL;
+ tty_port_tty_set(&port->port, NULL);
mutex_unlock(&port->mutex);
bailout_kref_put:
usb_serial_put(serial);
@@ -276,10 +276,11 @@
port->serial->type->close(tty, port, filp);
if (port->port.count == (port->console? 1 : 0)) {
- if (port->port.tty) {
- if (port->port.tty->driver_data)
- port->port.tty->driver_data = NULL;
- port->port.tty = NULL;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ if (tty->driver_data)
+ tty->driver_data = NULL;
+ tty_port_tty_set(&port->port, NULL);
}
}
@@ -508,11 +509,12 @@
if (!port)
return;
- tty = port->port.tty;
+ tty = tty_port_tty_get(&port->port);
if (!tty)
return;
tty_wakeup(tty);
+ tty_kref_put(tty);
}
static void port_release(struct device *dev)
@@ -819,6 +821,7 @@
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
goto probe_error;
+ tty_port_init(&port->port);
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
@@ -1040,8 +1043,11 @@
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
- if (port->port.tty)
- tty_hangup(port->port.tty);
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
kill_traffic(port);
}
}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index cf8924f..a6d1c75 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -499,7 +499,7 @@
int status = urb->status;
struct tty_struct *tty;
int result;
- int available_room;
+ int available_room = 0;
dbg("%s - port %d", __func__, port->number);
@@ -512,13 +512,17 @@
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
- tty = port->port.tty;
- if (tty && urb->actual_length) {
- available_room = tty_buffer_request_room(tty,
+ if (urb->actual_length) {
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ available_room = tty_buffer_request_room(tty,
urb->actual_length);
- if (available_room) {
- tty_insert_flip_string(tty, data, available_room);
- tty_flip_buffer_push(tty);
+ if (available_room) {
+ tty_insert_flip_string(tty, data,
+ available_room);
+ tty_flip_buffer_push(tty);
+ }
+ tty_kref_put(tty);
}
spin_lock(&priv->lock);
priv->bytes_in += available_room;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 3a9d143..11c8b97 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1481,7 +1481,7 @@
struct whiteheat_private *info =
container_of(work, struct whiteheat_private, rx_work);
struct usb_serial_port *port = info->port;
- struct tty_struct *tty = port->port.tty;
+ struct tty_struct *tty = tty_port_tty_get(&port->port);
struct whiteheat_urb_wrap *wrap;
struct urb *urb;
unsigned long flags;
@@ -1493,7 +1493,7 @@
spin_lock_irqsave(&info->lock, flags);
if (info->flags & THROTTLED) {
spin_unlock_irqrestore(&info->lock, flags);
- return;
+ goto out;
}
list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
@@ -1513,7 +1513,7 @@
spin_unlock_irqrestore(&info->lock, flags);
tty_flip_buffer_push(tty);
schedule_work(&info->rx_work);
- return;
+ goto out;
}
tty_insert_flip_string(tty, urb->transfer_buffer, len);
sent += len;
@@ -1536,6 +1536,8 @@
if (sent)
tty_flip_buffer_push(tty);
+out:
+ tty_kref_put(tty);
}
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 488eb42..a70d5d0 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -27,6 +27,7 @@
#define DEVPTS_SUPER_MAGIC 0x1cd1
#define DEVPTS_DEFAULT_MODE 0600
+#define PTMX_MINOR 2
extern int pty_limit; /* Config limit on Unix98 ptys */
static DEFINE_IDA(allocated_ptys);
@@ -169,15 +170,7 @@
* to the System V naming convention
*/
-static struct dentry *get_node(int num)
-{
- char s[12];
- struct dentry *root = devpts_root;
- mutex_lock(&root->d_inode->i_mutex);
- return lookup_one_len(s, root, sprintf(s, "%d", num));
-}
-
-int devpts_new_index(void)
+int devpts_new_index(struct inode *ptmx_inode)
{
int index;
int ida_ret;
@@ -205,20 +198,21 @@
return index;
}
-void devpts_kill_index(int idx)
+void devpts_kill_index(struct inode *ptmx_inode, int idx)
{
mutex_lock(&allocated_ptys_lock);
ida_remove(&allocated_ptys, idx);
mutex_unlock(&allocated_ptys_lock);
}
-int devpts_pty_new(struct tty_struct *tty)
+int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
{
int number = tty->index; /* tty layer puts index from devpts_new_index() in here */
struct tty_driver *driver = tty->driver;
dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct inode *inode = new_inode(devpts_mnt->mnt_sb);
+ char s[12];
/* We're supposed to be given the slave end of a pty */
BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
@@ -233,10 +227,15 @@
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|config.mode, device);
inode->i_private = tty;
+ tty->driver_data = inode;
- dentry = get_node(number);
- if (!IS_ERR(dentry) && !dentry->d_inode) {
- d_instantiate(dentry, inode);
+ sprintf(s, "%d", number);
+
+ mutex_lock(&devpts_root->d_inode->i_mutex);
+
+ dentry = d_alloc_name(devpts_root, s);
+ if (!IS_ERR(dentry)) {
+ d_add(dentry, inode);
fsnotify_create(devpts_root->d_inode, dentry);
}
@@ -245,36 +244,31 @@
return 0;
}
-struct tty_struct *devpts_get_tty(int number)
+struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
{
- struct dentry *dentry = get_node(number);
- struct tty_struct *tty;
+ BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
- tty = NULL;
- if (!IS_ERR(dentry)) {
- if (dentry->d_inode)
- tty = dentry->d_inode->i_private;
- dput(dentry);
- }
-
- mutex_unlock(&devpts_root->d_inode->i_mutex);
-
- return tty;
+ if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
+ return (struct tty_struct *)pts_inode->i_private;
+ return NULL;
}
-void devpts_pty_kill(int number)
+void devpts_pty_kill(struct tty_struct *tty)
{
- struct dentry *dentry = get_node(number);
+ struct inode *inode = tty->driver_data;
+ struct dentry *dentry;
- if (!IS_ERR(dentry)) {
- struct inode *inode = dentry->d_inode;
- if (inode) {
- inode->i_nlink--;
- d_delete(dentry);
- dput(dentry);
- }
+ BUG_ON(inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
+
+ mutex_lock(&devpts_root->d_inode->i_mutex);
+
+ dentry = d_find_alias(inode);
+ if (dentry && !IS_ERR(dentry)) {
+ inode->i_nlink--;
+ d_delete(dentry);
dput(dentry);
}
+
mutex_unlock(&devpts_root->d_inode->i_mutex);
}
diff --git a/fs/dquot.c b/fs/dquot.c
index 8ec4d6c..ad7e590 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -895,10 +895,9 @@
warntype == QUOTA_NL_BSOFTBELOW || !need_print_warning(dquot))
return;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
if (!tty)
- goto out_lock;
+ return;
tty_write_message(tty, dquot->dq_sb->s_id);
if (warntype == QUOTA_NL_ISOFTWARN || warntype == QUOTA_NL_BSOFTWARN)
tty_write_message(tty, ": warning, ");
@@ -926,8 +925,7 @@
break;
}
tty_write_message(tty, msg);
-out_lock:
- mutex_unlock(&tty_mutex);
+ tty_kref_put(tty);
}
#endif
diff --git a/fs/open.c b/fs/open.c
index 07da935..5596049 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1141,8 +1141,7 @@
asmlinkage long sys_vhangup(void)
{
if (capable(CAP_SYS_TTY_CONFIG)) {
- /* XXX: this needs locking */
- tty_vhangup(current->signal->tty);
+ tty_vhangup_self();
return 0;
}
return -EPERM;
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
index 3366035..06752a6 100644
--- a/include/asm-x86/ioctls.h
+++ b/include/asm-x86/ioctls.h
@@ -51,9 +51,15 @@
#define TCSETS2 _IOW('T', 0x2B, struct termios2)
#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485 0x542E
+#define TIOCSRS485 0x542F
#define TIOCGPTN _IOR('T', 0x30, unsigned int)
/* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+#define TCGETX 0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX 0x5433
+#define TCSETXF 0x5434
+#define TCSETXW 0x5435
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index 154769c..5ce0e5f 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -17,20 +17,31 @@
#ifdef CONFIG_UNIX98_PTYS
-int devpts_new_index(void);
-void devpts_kill_index(int idx);
-int devpts_pty_new(struct tty_struct *tty); /* mknod in devpts */
-struct tty_struct *devpts_get_tty(int number); /* get tty structure */
-void devpts_pty_kill(int number); /* unlink */
+int devpts_new_index(struct inode *ptmx_inode);
+void devpts_kill_index(struct inode *ptmx_inode, int idx);
+/* mknod in devpts */
+int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
+/* get tty structure */
+struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+/* unlink */
+void devpts_pty_kill(struct tty_struct *tty);
#else
/* Dummy stubs in the no-pty case */
-static inline int devpts_new_index(void) { return -EINVAL; }
-static inline void devpts_kill_index(int idx) { }
-static inline int devpts_pty_new(struct tty_struct *tty) { return -EINVAL; }
-static inline struct tty_struct *devpts_get_tty(int number) { return NULL; }
-static inline void devpts_pty_kill(int number) { }
+static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
+static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
+static inline int devpts_pty_new(struct inode *ptmx_inode,
+ struct tty_struct *tty)
+{
+ return -EINVAL;
+}
+static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
+ int number)
+{
+ return NULL;
+}
+static inline void devpts_pty_kill(struct tty_struct *tty) { }
#endif
diff --git a/include/linux/serial.h b/include/linux/serial.h
index deb7143..1ea8d92 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -173,6 +173,22 @@
int reserved[9];
};
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+ __u32 flags; /* RS485 feature flags */
+#define SER_RS485_ENABLED (1 << 0)
+#define SER_RS485_RTS_ON_SEND (1 << 1)
+#define SER_RS485_RTS_AFTER_SEND (1 << 2)
+ __u32 delay_rts_before_send; /* Milliseconds */
+ __u32 padding[6]; /* Memory is cheap, new structs
+ are a royal PITA .. */
+};
#ifdef __KERNEL__
#include <linux/compiler.h>
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 3b2f6c0..e27f216 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -241,7 +241,7 @@
struct uart_port {
spinlock_t lock; /* port lock */
- unsigned int iobase; /* in/out[bwl] */
+ unsigned long iobase; /* in/out[bwl] */
unsigned char __iomem *membase; /* read/write[bwl] */
unsigned int irq; /* irq number */
unsigned int uartclk; /* base uart clock */
diff --git a/include/linux/termios.h b/include/linux/termios.h
index 4786628..2acd0c1 100644
--- a/include/linux/termios.h
+++ b/include/linux/termios.h
@@ -4,4 +4,19 @@
#include <linux/types.h>
#include <asm/termios.h>
+#define NFF 5
+
+struct termiox
+{
+ __u16 x_hflag;
+ __u16 x_cflag;
+ __u16 x_rflag[NFF];
+ __u16 x_sflag;
+};
+
+#define RTSXOFF 0x0001 /* RTS flow control on input */
+#define CTSXON 0x0002 /* CTS flow control on output */
+#define DTRXOFF 0x0004 /* DTR flow control on input */
+#define DSRXON 0x0008 /* DCD flow control on output */
+
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 0cbec74..3b8121d 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -23,7 +23,7 @@
*/
#define NR_UNIX98_PTY_DEFAULT 4096 /* Default maximum for Unix98 ptys */
#define NR_UNIX98_PTY_MAX (1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS 18
+#define NR_LDISCS 19
/* line disciplines */
#define N_TTY 0
@@ -45,6 +45,7 @@
#define N_HCI 15 /* Bluetooth HCI UART */
#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */
#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
+#define N_PPS 18 /* Pulse per Second */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
@@ -181,6 +182,7 @@
struct tty_port {
struct tty_struct *tty; /* Back pointer */
+ spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
int count; /* Usage count */
wait_queue_head_t open_wait; /* Open waiters */
@@ -208,6 +210,7 @@
struct tty_struct {
int magic;
+ struct kref kref;
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
@@ -217,6 +220,7 @@
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
struct ktermios *termios, *termios_locked;
+ struct termiox *termiox; /* May be NULL for unsupported */
char name[64];
struct pid *pgrp; /* Protected by ctrl lock */
struct pid *session;
@@ -310,6 +314,25 @@
extern void console_init(void);
extern int vcs_init(void);
+extern struct class *tty_class;
+
+/**
+ * tty_kref_get - get a tty reference
+ * @tty: tty device
+ *
+ * Return a new reference to a tty object. The caller must hold
+ * sufficient locks/counts to ensure that their existing reference cannot
+ * go away
+ */
+
+extern inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
+{
+ if (tty)
+ kref_get(&tty->kref);
+ return tty;
+}
+extern void tty_kref_put(struct tty_struct *tty);
+
extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
const char *routine);
extern char *tty_name(struct tty_struct *tty, char *buf);
@@ -333,13 +356,15 @@
extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize *ws);
-
+extern void tty_shutdown(struct tty_struct *tty);
+extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
extern int is_ignored(int sig);
extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
+extern void tty_vhangup_self(void);
extern void tty_unhangup(struct file *filp);
extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
@@ -347,6 +372,9 @@
extern void disassociate_ctty(int priv);
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_flush(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_struct *tty);
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
@@ -372,6 +400,15 @@
extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
+extern void tty_default_fops(struct file_operations *fops);
+extern struct tty_struct *alloc_tty_struct(void);
+extern void free_tty_struct(struct tty_struct *tty);
+extern void initialize_tty_struct(struct tty_struct *tty,
+ struct tty_driver *driver, int idx);
+extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
+ int first_ok);
+extern void tty_release_dev(struct file *filp);
+extern int tty_init_termios(struct tty_struct *tty);
extern struct mutex tty_mutex;
@@ -382,6 +419,8 @@
extern void tty_port_init(struct tty_port *port);
extern int tty_port_alloc_xmit_buf(struct tty_port *port);
extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
+extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
@@ -427,7 +466,7 @@
#endif
/* tty_ioctl.c */
-extern int n_tty_ioctl(struct tty_struct *tty, struct file *file,
+extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
/* serial.c */
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 16d2794..78416b9 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -7,6 +7,28 @@
* defined; unless noted otherwise, they are optional, and can be
* filled in with a null pointer.
*
+ * struct tty_struct * (*lookup)(struct tty_driver *self, int idx)
+ *
+ * Return the tty device corresponding to idx, NULL if there is not
+ * one currently in use and an ERR_PTR value on error. Called under
+ * tty_mutex (for now!)
+ *
+ * Optional method. Default behaviour is to use the ttys array
+ *
+ * int (*install)(struct tty_driver *self, struct tty_struct *tty)
+ *
+ * Install a new tty into the tty driver internal tables. Used in
+ * conjunction with lookup and remove methods.
+ *
+ * Optional method. Default behaviour is to use the ttys array
+ *
+ * void (*remove)(struct tty_driver *self, struct tty_struct *tty)
+ *
+ * Remove a closed tty from the tty driver internal tables. Used in
+ * conjunction with lookup and remove methods.
+ *
+ * Optional method. Default behaviour is to use the ttys array
+ *
* int (*open)(struct tty_struct * tty, struct file * filp);
*
* This routine is called when a particular tty device is opened.
@@ -21,6 +43,11 @@
*
* Required method.
*
+ * void (*shutdown)(struct tty_struct * tty);
+ *
+ * This routine is called when a particular tty device is closed for
+ * the last time freeing up the resources.
+ *
* int (*write)(struct tty_struct * tty,
* const unsigned char *buf, int count);
*
@@ -180,6 +207,14 @@
* not force errors here if they are not resizable objects (eg a serial
* line). See tty_do_resize() if you need to wrap the standard method
* in your own logic - the usual case.
+ *
+ * void (*set_termiox)(struct tty_struct *tty, struct termiox *new);
+ *
+ * Called when the device receives a termiox based ioctl. Passes down
+ * the requested data from user space. This method will not be invoked
+ * unless the tty also has a valid tty->termiox pointer.
+ *
+ * Optional: Called under the termios lock
*/
#include <linux/fs.h>
@@ -190,8 +225,13 @@
struct tty_driver;
struct tty_operations {
+ struct tty_struct * (*lookup)(struct tty_driver *driver,
+ struct inode *inode, int idx);
+ int (*install)(struct tty_driver *driver, struct tty_struct *tty);
+ void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
int (*open)(struct tty_struct * tty, struct file * filp);
void (*close)(struct tty_struct * tty, struct file * filp);
+ void (*shutdown)(struct tty_struct *tty);
int (*write)(struct tty_struct * tty,
const unsigned char *buf, int count);
int (*put_char)(struct tty_struct *tty, unsigned char ch);
@@ -220,6 +260,7 @@
unsigned int set, unsigned int clear);
int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize *ws);
+ int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);
@@ -229,6 +270,7 @@
struct tty_driver {
int magic; /* magic number for this structure */
+ struct kref kref; /* Reference management */
struct cdev cdev;
struct module *owner;
const char *driver_name;
@@ -242,7 +284,6 @@
short subtype; /* subtype of tty driver */
struct ktermios init_termios; /* Initial termios */
int flags; /* tty driver flags */
- int refcount; /* for loadable tty drivers */
struct proc_dir_entry *proc_entry; /* /proc fs entry */
struct tty_driver *other; /* only used for the PTY driver */
@@ -264,12 +305,19 @@
extern struct list_head tty_drivers;
-struct tty_driver *alloc_tty_driver(int lines);
-void put_tty_driver(struct tty_driver *driver);
-void tty_set_operations(struct tty_driver *driver,
+extern struct tty_driver *alloc_tty_driver(int lines);
+extern void put_tty_driver(struct tty_driver *driver);
+extern void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op);
extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
+extern void tty_driver_kref_put(struct tty_driver *driver);
+extern inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
+{
+ kref_get(&d->kref);
+ return d;
+}
+
/* tty driver magic number */
#define TTY_DRIVER_MAGIC 0x5402
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 1cbd0a7..2f11134 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -96,7 +96,7 @@
void reset_vc(struct vc_data *vc);
extern int unbind_con_driver(const struct consw *csw, int first, int last,
int deflt);
-int vty_init(void);
+int vty_init(const struct file_operations *console_fops);
/*
* vc_screen.c shares this temporary buffer with the console write code so that
diff --git a/kernel/acct.c b/kernel/acct.c
index dd68b90..f6006a6 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -548,7 +548,7 @@
#endif
spin_lock_irq(¤t->sighand->siglock);
- tty = current->signal->tty;
+ tty = current->signal->tty; /* Safe as we hold the siglock */
ac.ac_tty = tty ? old_encode_dev(tty_devnum(tty)) : 0;
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_utime)));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_stime)));
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 59cedfb..cf5bc2f 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -246,8 +246,8 @@
unsigned n;
if (unlikely(!ctx))
return 0;
-
n = ctx->major;
+
switch (audit_classify_syscall(ctx->arch, n)) {
case 0: /* native */
if ((mask & AUDIT_PERM_WRITE) &&
@@ -1204,13 +1204,13 @@
(context->return_valid==AUDITSC_SUCCESS)?"yes":"no",
context->return_code);
- mutex_lock(&tty_mutex);
- read_lock(&tasklist_lock);
+ spin_lock_irq(&tsk->sighand->siglock);
if (tsk->signal && tsk->signal->tty && tsk->signal->tty->name)
tty = tsk->signal->tty->name;
else
tty = "(none)";
- read_unlock(&tasklist_lock);
+ spin_unlock_irq(&tsk->sighand->siglock);
+
audit_log_format(ab,
" a0=%lx a1=%lx a2=%lx a3=%lx items=%d"
" ppid=%d pid=%d auid=%u uid=%u gid=%u"
@@ -1230,7 +1230,6 @@
context->egid, context->sgid, context->fsgid, tty,
tsk->sessionid);
- mutex_unlock(&tty_mutex);
audit_log_task_info(ab, tsk);
if (context->filterkey) {
diff --git a/kernel/fork.c b/kernel/fork.c
index 7ce2ebe..30de644 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -802,6 +802,7 @@
sig->leader = 0; /* session leadership doesn't inherit */
sig->tty_old_pgrp = NULL;
+ sig->tty = NULL;
sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
sig->gtime = cputime_zero;
@@ -838,6 +839,7 @@
void __cleanup_signal(struct signal_struct *sig)
{
exit_thread_group_keys(sig);
+ tty_kref_put(sig->tty);
kmem_cache_free(signal_cachep, sig);
}
@@ -1227,7 +1229,8 @@
p->nsproxy->pid_ns->child_reaper = p;
p->signal->leader_pid = pid;
- p->signal->tty = current->signal->tty;
+ tty_kref_put(p->signal->tty);
+ p->signal->tty = tty_kref_get(current->signal->tty);
set_task_pgrp(p, task_pgrp_nr(current));
set_task_session(p, task_session_nr(current));
attach_pid(p, PIDTYPE_PGID, task_pgrp(current));
diff --git a/kernel/printk.c b/kernel/printk.c
index b51b156..a430fd0 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1291,22 +1291,6 @@
}
late_initcall(disable_boot_consoles);
-/**
- * tty_write_message - write a message to a certain tty, not just the console.
- * @tty: the destination tty_struct
- * @msg: the message to write
- *
- * This is used for messages that need to be redirected to a specific tty.
- * We don't put it into the syslog queue right now maybe in the future if
- * really needed.
- */
-void tty_write_message(struct tty_struct *tty, char *msg)
-{
- if (tty && tty->ops->write)
- tty->ops->write(tty, msg, strlen(msg));
- return;
-}
-
#if defined CONFIG_PRINTK
/*
diff --git a/kernel/sys.c b/kernel/sys.c
index 038a7bc..234d945 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1060,9 +1060,7 @@
group_leader->signal->leader = 1;
__set_special_pids(sid);
- spin_lock(&group_leader->sighand->siglock);
- group_leader->signal->tty = NULL;
- spin_unlock(&group_leader->sighand->siglock);
+ proc_clear_tty(group_leader);
err = session;
out:
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 4a7374c..4888139 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2121,7 +2121,6 @@
long j = -1;
int drop_tty = 0;
- mutex_lock(&tty_mutex);
tty = get_current_tty();
if (tty) {
file_list_lock();
@@ -2139,8 +2138,8 @@
}
}
file_list_unlock();
+ tty_kref_put(tty);
}
- mutex_unlock(&tty_mutex);
/* Reset controlling tty. */
if (drop_tty)
no_tty();