arch/blackfin/mach-bf527/include/mach/anomaly.h - fp2-dev/kernel/msm - Gitiles

 /*
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
  * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */

 /* This file should be up to date with:
  *  - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
  *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */

 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_

 /* We do not support old silicon - sorry */
 #if __SILICON_REVISION__ < 0
 # error will not work on BF526/BF527 silicon version
 #endif

 #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
 # define ANOMALY_BF526 1
 #else
 # define ANOMALY_BF526 0
 #endif
 #if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
 # define ANOMALY_BF527 1
 #else
 # define ANOMALY_BF527 0
 #endif

 #define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
 #define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
 #define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))

 /* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
 #define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
 #define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
 /* Host DMA Boot Modes Are Not Functional */
 #define ANOMALY_05000330 (__SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
 #define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
 #define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
 /* USB Calibration Value Is Not Initialized */
 #define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB Calibration Value to use */
 #define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
 /* Security Features Are Not Functional */
 #define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
 /* bfrom_SysControl() Firmware Function Performs Improper System Reset */
 #define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
 #define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
 /* Incorrect Revision Number in DSPID Register */
 #define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Incorrect Default CSEL Value in PLL_DIV */
 #define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
 /* Authentication Fails To Initiate */
 #define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
 #define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
 /* 8-Bit NAND Flash Boot Mode Not Functional */
 #define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Boot from OTP Memory Not Functional */
 #define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Routine Not Functional */
 #define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
 /* Programmable Preboot Settings Not Functional */
 #define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
 /* CRC32 Checksum Support Not Functional */
 #define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Reset Vector Must Not Be in SDRAM Memory Space */
 #define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
 /* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
 #define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
 /* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
 #define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
 /* Log Buffer Not Functional */
 #define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
 /* Hook Routine Not Functional */
 #define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
 /* Header Indirect Bit Not Functional */
 #define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
 /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
 #define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
 /* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
 #define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
 /* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
 #define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
 #define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Disallows Certain User Interrupts */
 #define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox SESR Firmware Does Not Save/Restore Full Context */
 #define ANOMALY_05000405 (1)
 /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
 #define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
 #define ANOMALY_05000408 (1)
 /* Lockbox firmware leaves MDMA0 channel enabled */
 #define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Incorrect Default Internal Voltage Regulator Setting */
 #define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
 /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
 #define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
 #define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* DEB2_URGENT Bit Not Functional */
 #define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
 #define ANOMALY_05000416 (1)
 /* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
 #define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
 /* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
 #define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
 #define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
 #define ANOMALY_05000421 (1)
 /* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
 #define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
 /* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
 #define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Internal Voltage Regulator Not Trimmed */
 #define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
 /* Multichannel SPORT Channel Misalignment Under Specific Configuration */
 #define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
 #define ANOMALY_05000426 (1)
 /* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
 #define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
 #define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
 #define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
 /* Preboot Cannot be Used to Alter the PLL_DIV Register */
 #define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
 /* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
 #define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
 /* OTP Write Accesses Not Supported */
 #define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
 #define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
 /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
 #define ANOMALY_05000456 (1)
 /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
 #define ANOMALY_05000457 (1)
 /* False Hardware Error when RETI points to invalid memory */
 #define ANOMALY_05000461 (1)

 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
 #define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000149 (0)
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000183 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000215 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
 #define ANOMALY_05000233 (0)
 #define ANOMALY_05000242 (0)
 #define ANOMALY_05000244 (0)
 #define ANOMALY_05000248 (0)
 #define ANOMALY_05000250 (0)
 #define ANOMALY_05000261 (0)
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000274 (0)
 #define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
 #define ANOMALY_05000287 (0)
 #define ANOMALY_05000301 (0)
 #define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000450 (0)

 #endif
	/*
	* File: include/asm-blackfin/mach-bf527/anomaly.h
	* Bugs: Enter bugs at http://blackfin.uclinux.org/
	*
	* Copyright (C) 2004-2009 Analog Devices Inc.
	* Licensed under the GPL-2 or later.
	*/

	/* This file should be up to date with:
	* - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
	* - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
	*/

	#ifndef _MACH_ANOMALY_H_
	#define _MACH_ANOMALY_H_

	/* We do not support old silicon - sorry */
	#if __SILICON_REVISION__ < 0
	# error will not work on BF526/BF527 silicon version
	#endif

	#if defined(__ADSPBF522__) \|\| defined(__ADSPBF524__) \|\| defined(__ADSPBF526__)
	# define ANOMALY_BF526 1
	#else
	# define ANOMALY_BF526 0
	#endif
	#if defined(__ADSPBF523__) \|\| defined(__ADSPBF525__) \|\| defined(__ADSPBF527__)
	# define ANOMALY_BF527 1
	#else
	# define ANOMALY_BF527 0
	#endif

	#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
	#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
	#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) \|\| _ANOMALY_BF527(rev527))

	/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
	#define ANOMALY_05000074 (1)
	/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
	#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
	/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
	#define ANOMALY_05000122 (1)
	/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
	#define ANOMALY_05000245 (1)
	/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
	#define ANOMALY_05000254 (1)
	/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
	#define ANOMALY_05000265 (1)
	/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
	#define ANOMALY_05000310 (1)
	/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
	#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Incorrect Access of OTP_STATUS During otp_write() Function */
	#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
	/* Host DMA Boot Modes Are Not Functional */
	#define ANOMALY_05000330 (__SILICON_REVISION__ < 2)
	/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
	#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
	/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
	#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
	/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
	#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
	/* USB Calibration Value Is Not Initialized */
	#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* USB Calibration Value to use */
	#define ANOMALY_05000346_value 0xE510
	/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
	#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
	/* Security Features Are Not Functional */
	#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
	/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
	#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
	/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
	#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
	/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
	#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
	/* Incorrect Revision Number in DSPID Register */
	#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
	/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
	#define ANOMALY_05000366 (1)
	/* Incorrect Default CSEL Value in PLL_DIV */
	#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
	/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
	#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
	/* Authentication Fails To Initiate */
	#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
	/* Data Read From L3 Memory by USB DMA May be Corrupted */
	#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
	/* 8-Bit NAND Flash Boot Mode Not Functional */
	#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Boot from OTP Memory Not Functional */
	#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
	/* bfrom_SysControl() Firmware Routine Not Functional */
	#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
	/* Programmable Preboot Settings Not Functional */
	#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
	/* CRC32 Checksum Support Not Functional */
	#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Reset Vector Must Not Be in SDRAM Memory Space */
	#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
	/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
	#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
	/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
	#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
	/* Log Buffer Not Functional */
	#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
	/* Hook Routine Not Functional */
	#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
	/* Header Indirect Bit Not Functional */
	#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
	/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
	#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
	/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
	#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
	/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
	#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
	/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
	#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
	#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Lockbox SESR Disallows Certain User Interrupts */
	#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
	#define ANOMALY_05000405 (1)
	/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
	#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
	#define ANOMALY_05000408 (1)
	/* Lockbox firmware leaves MDMA0 channel enabled */
	#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Incorrect Default Internal Voltage Regulator Setting */
	#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
	/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
	#define ANOMALY_05000411 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
	#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* DEB2_URGENT Bit Not Functional */
	#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Speculative Fetches Can Cause Undesired External FIFO Operations */
	#define ANOMALY_05000416 (1)
	/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
	#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
	/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
	#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
	#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
	#define ANOMALY_05000421 (1)
	/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
	#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
	/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
	#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Internal Voltage Regulator Not Trimmed */
	#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
	/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
	#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
	#define ANOMALY_05000426 (1)
	/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
	#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
	/* Software System Reset Corrupts PLL_LOCKCNT Register */
	#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
	/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
	#define ANOMALY_05000431 (1)
	/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
	#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
	/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
	#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
	/* Preboot Cannot be Used to Alter the PLL_DIV Register */
	#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
	/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
	#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
	/* OTP Write Accesses Not Supported */
	#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
	/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
	#define ANOMALY_05000443 (1)
	/* The WURESET Bit in the SYSCR Register is not Functional */
	#define ANOMALY_05000445 (1)
	/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
	#define ANOMALY_05000451 (1)
	/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
	#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
	/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
	#define ANOMALY_05000456 (1)
	/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
	#define ANOMALY_05000457 (1)
	/* False Hardware Error when RETI points to invalid memory */
	#define ANOMALY_05000461 (1)

	/* Anomalies that don't exist on this proc */
	#define ANOMALY_05000099 (0)
	#define ANOMALY_05000120 (0)
	#define ANOMALY_05000125 (0)
	#define ANOMALY_05000149 (0)
	#define ANOMALY_05000158 (0)
	#define ANOMALY_05000171 (0)
	#define ANOMALY_05000179 (0)
	#define ANOMALY_05000183 (0)
	#define ANOMALY_05000198 (0)
	#define ANOMALY_05000215 (0)
	#define ANOMALY_05000220 (0)
	#define ANOMALY_05000227 (0)
	#define ANOMALY_05000230 (0)
	#define ANOMALY_05000231 (0)
	#define ANOMALY_05000233 (0)
	#define ANOMALY_05000242 (0)
	#define ANOMALY_05000244 (0)
	#define ANOMALY_05000248 (0)
	#define ANOMALY_05000250 (0)
	#define ANOMALY_05000261 (0)
	#define ANOMALY_05000263 (0)
	#define ANOMALY_05000266 (0)
	#define ANOMALY_05000273 (0)
	#define ANOMALY_05000274 (0)
	#define ANOMALY_05000278 (0)
	#define ANOMALY_05000285 (0)
	#define ANOMALY_05000287 (0)
	#define ANOMALY_05000301 (0)
	#define ANOMALY_05000305 (0)
	#define ANOMALY_05000307 (0)
	#define ANOMALY_05000311 (0)
	#define ANOMALY_05000312 (0)
	#define ANOMALY_05000323 (0)
	#define ANOMALY_05000362 (1)
	#define ANOMALY_05000363 (0)
	#define ANOMALY_05000400 (0)
	#define ANOMALY_05000412 (0)
	#define ANOMALY_05000447 (0)
	#define ANOMALY_05000448 (0)
	#define ANOMALY_05000450 (0)

	#endif