Merge branch 'next-s3c64xx-regs' of git://aeryn.fluff.org.uk/bjdooks/linux into devel
diff --git a/CREDITS b/CREDITS
index 5e07367..e8b7d36 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3738,7 +3738,7 @@
S: Germany
N: Gertjan van Wingerde
-E: gwingerde@home.nl
+E: gwingerde@gmail.com
D: Ralink rt2x00 WLAN driver
D: Minix V2 file-system
D: Misc fixes
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 6e25340..accfe2f 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -298,3 +298,15 @@
Note that, rcu_assign_pointer() and rcu_dereference() relate to
SRCU just as they do to other forms of RCU.
+
+15. The whole point of call_rcu(), synchronize_rcu(), and friends
+ is to wait until all pre-existing readers have finished before
+ carrying out some otherwise-destructive operation. It is
+ therefore critically important to -first- remove any path
+ that readers can follow that could be affected by the
+ destructive operation, and -only- -then- invoke call_rcu(),
+ synchronize_rcu(), or friends.
+
+ Because these primitives only wait for pre-existing readers,
+ it is the caller's responsibility to guarantee safety to
+ any subsequent readers.
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index 0dab6e3..a30fe51 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -40,13 +40,13 @@
Machine Support
---------------
- The machine specific functions must call the s3c2410_pm_init() function
+ The machine specific functions must call the s3c_pm_init() function
to say that its bootloader is capable of resuming. This can be as
simple as adding the following to the machine's definition:
- INITMACHINE(s3c2410_pm_init)
+ INITMACHINE(s3c_pm_init)
- A board can do its own setup before calling s3c2410_pm_init, if it
+ A board can do its own setup before calling s3c_pm_init, if it
needs to setup anything else for power management support.
There is currently no support for over-riding the default method of
@@ -74,7 +74,7 @@
enable_irq_wake(IRQ_EINT0);
- s3c2410_pm_init();
+ s3c_pm_init();
}
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index dc60455..43cb100 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -29,7 +29,14 @@
CPU supports vector relocation (control
register V bit.)
-ffc00000 fffeffff DMA memory mapping region. Memory returned
+fffe0000 fffeffff XScale cache flush area. This is used
+ in proc-xscale.S to flush the whole data
+ cache. Free for other usage on non-XScale.
+
+fff00000 fffdffff Fixmap mapping region. Addresses provided
+ by fix_to_virt() will be located here.
+
+ffc00000 ffefffff DMA memory mapping region. Memory returned
by the dma_alloc_xxx functions will be
dynamically mapped here.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5ddbe35..20d3b94 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -335,3 +335,12 @@
Secmark, it is time to deprecate the older mechanism and start the
process of removing the old code.
Who: Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What: sysfs ui for changing p4-clockmod parameters
+When: September 2009
+Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+ e088e4c9cdb618675874becb91b2fd581ee707e6.
+ Removal is subject to fixing any remaining bugs in ACPI which may
+ cause the thermal throttling not to happen at the right time.
+Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 4333e83..e055acb 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -373,10 +373,11 @@
Compression (*) http://e2compr.sourceforge.net/
Implementations for:
-Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*) http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs
+Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2
DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2 http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (+) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
(*) no longer actively developed/supported (as of Apr 2001)
+(+) no longer actively developed/supported (as of Mar 2009)
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 9dd2a3b..e5f3833 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -198,5 +198,5 @@
programs: http://e2fsprogs.sourceforge.net/
http://ext2resize.sourceforge.net
-useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/
- http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links: http://www.ibm.com/developerworks/library/l-fs7.html
+ http://www.ibm.com/developerworks/library/l-fs8.html
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a87be42..830bad7 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1478,6 +1478,13 @@
this should be enabled, but if the problem persists the messages can be
disabled.
+netdev_budget
+-------------
+
+Maximum number of packets taken from all interfaces in one polling cycle (NAPI
+poll). In one polling cycle interfaces which are registered to polling are
+probed in a round-robin manner. The limit of packets in one such probe can be
+set per-device via sysfs class/net/<device>/weight .
netdev_max_backlog
------------------
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 3e79e4a..b324c03 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -22,7 +22,7 @@
Squashfs Cramfs
-Max filesystem size: 2^64 16 MiB
+Max filesystem size: 2^64 256 MiB
Max file size: ~ 2 TiB 16 MiB
Max files: unlimited unlimited
Max directories: unlimited unlimited
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 0e84117..93d8e3d 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -42,6 +42,11 @@
Addresses scanned: I2C 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+ * Maxim MAX6648
+ Prefix: 'max6646'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
* Maxim MAX6649
Prefix: 'max6646'
Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@
0x4c, 0x4d and 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+ * Maxim MAX6692
+ Prefix: 'max6646'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
Author: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 54f21a5..ef9827f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -830,6 +830,12 @@
hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
terminal devices. Valid values: 0..8
+ i2c_bus= [HW] Override the default board specific I2C bus speed
+ or register an additional I2C bus that is not
+ registered from board initialization code.
+ Format:
+ <bus_id>,<clkrate>
+
i8042.debug [HW] Toggle i8042 debug mode
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
diff --git a/Documentation/logo.gif b/Documentation/logo.gif
deleted file mode 100644
index 2eae75f..0000000
--- a/Documentation/logo.gif
+++ /dev/null
Binary files differ
diff --git a/Documentation/logo.svg b/Documentation/logo.svg
new file mode 100644
index 0000000..cb9e485
--- /dev/null
+++ b/Documentation/logo.svg
@@ -0,0 +1,2911 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+ xmlns:dc="http://purl.org/dc/elements/1.1/"
+ xmlns:cc="http://creativecommons.org/ns#"
+ xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ width="1771.6534"
+ height="1417.3228"
+ id="svg2"
+ sodipodi:version="0.32"
+ inkscape:version="0.46"
+ sodipodi:docname="tuz.svg"
+ inkscape:output_extension="org.inkscape.output.svg.inkscape"
+ version="1.0"
+ style="display:inline;enable-background:new"
+ inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
+ inkscape:export-xdpi="100.03588"
+ inkscape:export-ydpi="100.03588">
+ <sodipodi:namedview
+ id="base"
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1.0"
+ gridtolerance="10000"
+ guidetolerance="10"
+ objecttolerance="10"
+ inkscape:pageopacity="0.0"
+ inkscape:pageshadow="2"
+ inkscape:zoom="0.25"
+ inkscape:cx="-174.7931"
+ inkscape:cy="784.26325"
+ inkscape:document-units="px"
+ inkscape:current-layer="svg2"
+ showgrid="false"
+ inkscape:window-width="1280"
+ inkscape:window-height="823"
+ inkscape:window-x="-4"
+ inkscape:window-y="25"
+ showguides="true"
+ inkscape:guide-bbox="true"
+ units="mm" />
+ <defs
+ id="defs4">
+ <filter
+ inkscape:collect="always"
+ x="-0.084654994"
+ width="1.16931"
+ y="-0.36592469"
+ height="1.7318494"
+ id="filter11361">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="4.5740586"
+ id="feGaussianBlur11363" />
+ </filter>
+ <inkscape:perspective
+ sodipodi:type="inkscape:persp3d"
+ inkscape:vp_x="0 : 564.0976 : 1"
+ inkscape:vp_y="0 : 1000 : 0"
+ inkscape:vp_z="1445.8591 : 564.0976 : 1"
+ inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
+ id="perspective8145" />
+ <linearGradient
+ id="linearGradient7622">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1;"
+ offset="0"
+ id="stop7624" />
+ <stop
+ style="stop-color:#ffffff;stop-opacity:0;"
+ offset="1"
+ id="stop7626" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4113">
+ <stop
+ style="stop-color:#000000;stop-opacity:0;"
+ offset="0"
+ id="stop4115" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="1"
+ id="stop4117" />
+ </linearGradient>
+ <linearGradient
+ inkscape:collect="always"
+ id="linearGradient3660">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1;"
+ offset="0"
+ id="stop3662" />
+ <stop
+ style="stop-color:#ffffff;stop-opacity:0;"
+ offset="1"
+ id="stop3664" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3627">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1;"
+ offset="0"
+ id="stop3629" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="1"
+ id="stop3631" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient2843">
+ <stop
+ id="stop2845"
+ offset="0"
+ style="stop-color:#000000;stop-opacity:1;" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="0.02188784"
+ id="stop2847" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="0.75866222"
+ id="stop2849" />
+ <stop
+ id="stop2851"
+ offset="0.88508981"
+ style="stop-color:#232323;stop-opacity:1;" />
+ <stop
+ id="stop2853"
+ offset="1"
+ style="stop-color:#595959;stop-opacity:1;" />
+ </linearGradient>
+ <linearGradient
+ inkscape:collect="always"
+ id="linearGradient8964">
+ <stop
+ style="stop-color:#1a1a1a;stop-opacity:1;"
+ offset="0"
+ id="stop8966" />
+ <stop
+ style="stop-color:#1a1a1a;stop-opacity:0;"
+ offset="1"
+ id="stop8968" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient8952">
+ <stop
+ style="stop-color:#0a0c0c;stop-opacity:1;"
+ offset="0"
+ id="stop8954" />
+ <stop
+ style="stop-color:#1f2727;stop-opacity:0;"
+ offset="1"
+ id="stop8956" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient8430">
+ <stop
+ style="stop-color:#1e2323;stop-opacity:1;"
+ offset="0"
+ id="stop8432" />
+ <stop
+ id="stop8438"
+ offset="0.55992389"
+ style="stop-color:#181d1d;stop-opacity:1;" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="1"
+ id="stop8434" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient8398">
+ <stop
+ style="stop-color:#283131;stop-opacity:0;"
+ offset="0"
+ id="stop8400" />
+ <stop
+ id="stop8402"
+ offset="0.5125587"
+ style="stop-color:#1e2424;stop-opacity:0;" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="1"
+ id="stop8404" />
+ </linearGradient>
+ <linearGradient
+ inkscape:collect="always"
+ id="linearGradient4870">
+ <stop
+ style="stop-color:#c7bd80;stop-opacity:1;"
+ offset="0"
+ id="stop4872" />
+ <stop
+ style="stop-color:#c7bd80;stop-opacity:0;"
+ offset="1"
+ id="stop4874" />
+ </linearGradient>
+ <linearGradient
+ inkscape:collect="always"
+ id="linearGradient4862">
+ <stop
+ style="stop-color:#e2e2e2;stop-opacity:1;"
+ offset="0"
+ id="stop4864" />
+ <stop
+ style="stop-color:#e2e2e2;stop-opacity:0;"
+ offset="1"
+ id="stop4866" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4478">
+ <stop
+ style="stop-color:#f9eed3;stop-opacity:1;"
+ offset="0"
+ id="stop4480" />
+ <stop
+ style="stop-color:#000000;stop-opacity:0;"
+ offset="1"
+ id="stop4482" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4106">
+ <stop
+ style="stop-color:#d9e002;stop-opacity:1;"
+ offset="0"
+ id="stop4108" />
+ <stop
+ id="stop4114"
+ offset="0.5"
+ style="stop-color:#a9ae01;stop-opacity:1;" />
+ <stop
+ style="stop-color:#717501;stop-opacity:1;"
+ offset="1"
+ id="stop4110" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4084">
+ <stop
+ style="stop-color:#7d7d00;stop-opacity:1;"
+ offset="0"
+ id="stop4086" />
+ <stop
+ id="stop4088"
+ offset="0.3636601"
+ style="stop-color:#c6c700;stop-opacity:1;" />
+ <stop
+ style="stop-color:#f6f800;stop-opacity:1;"
+ offset="1"
+ id="stop4090" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4041">
+ <stop
+ id="stop4043"
+ offset="0"
+ style="stop-color:#ffff00;stop-opacity:1;" />
+ <stop
+ id="stop4045"
+ offset="1"
+ style="stop-color:#ffff00;stop-opacity:0;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4025">
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1;"
+ offset="0"
+ id="stop4027" />
+ <stop
+ style="stop-color:#ffffff;stop-opacity:0;"
+ offset="1"
+ id="stop4031" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient4013">
+ <stop
+ style="stop-color:#ffff00;stop-opacity:1;"
+ offset="0"
+ id="stop4015" />
+ <stop
+ style="stop-color:#b2b200;stop-opacity:1;"
+ offset="1"
+ id="stop4017" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3985">
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="0"
+ id="stop3987" />
+ <stop
+ style="stop-color:#1d1d1d;stop-opacity:1;"
+ offset="1"
+ id="stop3989" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3961">
+ <stop
+ style="stop-color:#283131;stop-opacity:0;"
+ offset="0"
+ id="stop3963" />
+ <stop
+ id="stop3965"
+ offset="0.5"
+ style="stop-color:#1e2424;stop-opacity:1;" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="1"
+ id="stop3967" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3951">
+ <stop
+ id="stop3953"
+ offset="0"
+ style="stop-color:#344040;stop-opacity:1;" />
+ <stop
+ style="stop-color:#222929;stop-opacity:1;"
+ offset="0.5"
+ id="stop3955" />
+ <stop
+ id="stop3957"
+ offset="1"
+ style="stop-color:#000000;stop-opacity:1;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3909">
+ <stop
+ style="stop-color:#283131;stop-opacity:1;"
+ offset="0"
+ id="stop3911" />
+ <stop
+ id="stop3917"
+ offset="0.5"
+ style="stop-color:#1e2424;stop-opacity:1;" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="1"
+ id="stop3913" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3537">
+ <stop
+ style="stop-color:#ada469;stop-opacity:1;"
+ offset="0"
+ id="stop3539" />
+ <stop
+ id="stop3545"
+ offset="0.81132078"
+ style="stop-color:#ada469;stop-opacity:1;" />
+ <stop
+ style="stop-color:#ffffff;stop-opacity:1;"
+ offset="1"
+ id="stop3541" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3317">
+ <stop
+ style="stop-color:#cfc690;stop-opacity:1"
+ offset="0"
+ id="stop3319" />
+ <stop
+ id="stop3321"
+ offset="0.21161865"
+ style="stop-color:#afa775;stop-opacity:1;" />
+ <stop
+ id="stop3323"
+ offset="0.53408515"
+ style="stop-color:#615c3a;stop-opacity:1;" />
+ <stop
+ style="stop-color:#000000;stop-opacity:1;"
+ offset="0.76504093"
+ id="stop3325" />
+ <stop
+ id="stop3327"
+ offset="1"
+ style="stop-color:#403518;stop-opacity:1;" />
+ </linearGradient>
+ <linearGradient
+ id="linearGradient3239">
+ <stop
+ id="stop3251"
+ offset="0"
+ style="stop-color:#cfc690;stop-opacity:1;" />
+ <stop
+ style="stop-color:#afa775;stop-opacity:1;"
+ offset="0.21161865"
+ id="stop3267" />
+ <stop
+ style="stop-color:#615c3a;stop-opacity:1;"
+ offset="0.53408515"
+ id="stop3261" />
+ <stop
+ id="stop3265"
+ offset="0.76504093"
+ style="stop-color:#000000;stop-opacity:1;" />
+ <stop
+ style="stop-color:#403518;stop-opacity:1;"
+ offset="1"
+ id="stop3243" />
+ </linearGradient>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3239"
+ id="radialGradient3281"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
+ spreadMethod="pad"
+ cx="806.52582"
+ cy="212.68117"
+ fx="806.52582"
+ fy="212.68117"
+ r="48.363216" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3317"
+ id="radialGradient3315"
+ cx="543.6698"
+ cy="147.3131"
+ fx="543.6698"
+ fy="147.3131"
+ r="47.863216"
+ gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3537"
+ id="radialGradient3543"
+ cx="385"
+ cy="237.00504"
+ fx="385"
+ fy="237.00504"
+ r="86.928574"
+ gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3909"
+ id="radialGradient3915"
+ cx="418.30365"
+ cy="342.47794"
+ fx="418.30365"
+ fy="342.47794"
+ r="131.4509"
+ gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3951"
+ id="radialGradient3933"
+ cx="397.16388"
+ cy="336.95245"
+ fx="397.16388"
+ fy="336.95245"
+ r="36.75"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3961"
+ id="linearGradient3959"
+ x1="398.21429"
+ y1="343.52289"
+ x2="379.28571"
+ y2="265.30862"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="translate(450.03125,73.843964)" />
+ <filter
+ inkscape:collect="always"
+ id="filter3981"
+ x="-0.30000001"
+ width="1.6"
+ y="-0.30000001"
+ height="1.6">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="2"
+ id="feGaussianBlur3983" />
+ </filter>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3985"
+ id="radialGradient3991"
+ cx="402.48898"
+ cy="317.23578"
+ fx="402.48898"
+ fy="317.23578"
+ r="23.714285"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3999">
+ <path
+ style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
+ d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
+ id="path4001"
+ sodipodi:nodetypes="czzczzzzc" />
+ </clipPath>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4013"
+ id="radialGradient4056"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+ cx="228.81355"
+ cy="440.26971"
+ fx="228.81355"
+ fy="440.26971"
+ r="119.17509" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4041"
+ id="radialGradient4060"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+ cx="275.4422"
+ cy="335.34866"
+ fx="275.4422"
+ fy="335.34866"
+ r="36.75" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4025"
+ id="radialGradient4062"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
+ cx="275.4422"
+ cy="335.34866"
+ fx="275.4422"
+ fy="335.34866"
+ r="36.75" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4084"
+ id="linearGradient4082"
+ gradientUnits="userSpaceOnUse"
+ x1="182.35046"
+ y1="256.11136"
+ x2="145.53348"
+ y2="542.20502" />
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath4100">
+ <path
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
+ id="path4102"
+ sodipodi:nodetypes="ccccccc" />
+ </clipPath>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4106"
+ id="radialGradient4112"
+ cx="250.22678"
+ cy="475.09763"
+ fx="250.22678"
+ fy="475.09763"
+ r="95.98877"
+ gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4478"
+ id="linearGradient4484"
+ x1="412.08926"
+ y1="404.91574"
+ x2="417.375"
+ y2="401.82648"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4478"
+ id="linearGradient4486"
+ x1="411.91071"
+ y1="404.91577"
+ x2="417.375"
+ y2="401.82648"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4478"
+ id="linearGradient4488"
+ x1="411.91071"
+ y1="405.54077"
+ x2="417.375"
+ y2="401.82648"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4478"
+ id="linearGradient4490"
+ x1="412.08926"
+ y1="405.54077"
+ x2="417.375"
+ y2="401.82648"
+ gradientUnits="userSpaceOnUse" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4478"
+ id="linearGradient4492"
+ x1="411.73212"
+ y1="405.54077"
+ x2="417.375"
+ y2="401.82648"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4862"
+ id="radialGradient4868"
+ cx="429.56738"
+ cy="377.42877"
+ fx="429.56738"
+ fy="377.42877"
+ r="72.079735"
+ gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4870"
+ id="radialGradient4876"
+ cx="437.6991"
+ cy="391.21735"
+ fx="437.6991"
+ fy="391.21735"
+ r="36.611931"
+ gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
+ gradientUnits="userSpaceOnUse" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4013"
+ id="radialGradient3585"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
+ cx="228.81355"
+ cy="440.26971"
+ fx="228.81355"
+ fy="440.26971"
+ r="119.17509" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4084"
+ id="linearGradient3587"
+ gradientUnits="userSpaceOnUse"
+ x1="182.35046"
+ y1="256.11136"
+ x2="145.53348"
+ y2="542.20502" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3317"
+ id="radialGradient8410"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
+ cx="317.78754"
+ cy="129.65378"
+ fx="317.78754"
+ fy="129.65378"
+ r="47.863216" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient8398"
+ id="radialGradient8412"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
+ cx="325.30847"
+ cy="80.909554"
+ fx="325.30847"
+ fy="80.909554"
+ r="26.937988" />
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8514">
+ <path
+ style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+ id="path8516"
+ sodipodi:nodetypes="cscccccccccccc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8604">
+ <path
+ style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+ id="path8606"
+ sodipodi:nodetypes="cscccccccccccc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8610">
+ <path
+ style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+ id="path8612"
+ sodipodi:nodetypes="cscccccccccccc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8616">
+ <path
+ style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+ id="path8618"
+ sodipodi:nodetypes="cscccccccccccc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8622">
+ <path
+ style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
+ id="path8624"
+ sodipodi:nodetypes="czzzzzzczczczczzzc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8642">
+ <path
+ style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+ id="path8644"
+ sodipodi:nodetypes="czzcczcc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8658">
+ <path
+ style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+ id="path8660"
+ sodipodi:nodetypes="czzzcczzcc" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter8802"
+ x="-0.35311759"
+ width="1.7062352"
+ y="-0.1817714"
+ height="1.3635428">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="48.038491"
+ id="feGaussianBlur8804" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8806"
+ x="-0.61142862"
+ width="2.2228572"
+ y="-0.14930232"
+ height="1.2986046">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="37.830213"
+ id="feGaussianBlur8808" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8810"
+ x="-0.23519406"
+ width="1.4703881"
+ y="-0.24500646"
+ height="1.4900129">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="58.328041"
+ id="feGaussianBlur8812" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8814"
+ x="-0.20466694"
+ width="1.4093339"
+ y="-0.29007819"
+ height="1.5801564">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="22.300169"
+ id="feGaussianBlur8816" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8818"
+ x="-0.34381232"
+ width="1.6876246"
+ y="-0.18433961"
+ height="1.3686792">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="34.542167"
+ id="feGaussianBlur8820" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8822"
+ x="-0.2742857"
+ width="1.5485713"
+ y="-0.21333334"
+ height="1.4266667">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="11.313708"
+ id="feGaussianBlur8824" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8826"
+ x="-0.25894088"
+ width="1.5178818"
+ y="-0.2236412"
+ height="1.4472824">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="19.631544"
+ id="feGaussianBlur8828" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8856"
+ x="-0.3253231"
+ width="1.6506462"
+ y="-0.19013336"
+ height="1.3802667">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="28.712591"
+ id="feGaussianBlur8858" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8860"
+ x="-0.38093024"
+ width="1.7618605"
+ y="-0.17518716"
+ height="1.3503743">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="19.304015"
+ id="feGaussianBlur8862" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8888"
+ x="-0.2112188"
+ width="1.4224375"
+ y="-0.16808605"
+ height="1.3361721">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="8.3693583"
+ id="feGaussianBlur8890" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8892"
+ x="-0.18692794"
+ width="1.3738559"
+ y="-0.23646873"
+ height="1.4729375">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="31.21228"
+ id="feGaussianBlur8894" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8906">
+ <path
+ style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
+ id="path8908"
+ sodipodi:nodetypes="cscccccccccccc" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter8940"
+ x="-0.25152978"
+ width="1.5030596"
+ y="-0.053035267"
+ height="1.1060705">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="13.024603"
+ id="feGaussianBlur8942" />
+ </filter>
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient8952"
+ id="linearGradient8958"
+ x1="609.31244"
+ y1="239.46866"
+ x2="560.83142"
+ y2="262.86206"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="translate(450.03125,73.843964)" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient8964"
+ id="linearGradient8970"
+ x1="603.84064"
+ y1="627.85303"
+ x2="616.24396"
+ y2="585.42664"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="translate(450.03125,73.843964)" />
+ <filter
+ inkscape:collect="always"
+ id="filter9020"
+ x="-0.32861114"
+ width="1.6572223"
+ y="-0.182"
+ height="1.364">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="20.912684"
+ id="feGaussianBlur9022" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter9024"
+ x="-0.55453134"
+ width="2.1090627"
+ y="-0.51434779"
+ height="2.0286956">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="20.912684"
+ id="feGaussianBlur9026" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter9044"
+ x="-0.32631579"
+ width="1.6526316"
+ y="-0.84545463"
+ height="2.6909094">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="21.92031"
+ id="feGaussianBlur9046" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter9048"
+ x="-0.40879121"
+ width="1.8175824"
+ y="-0.71538466"
+ height="2.4307692">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="21.92031"
+ id="feGaussianBlur9050" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3587"
+ x="-0.1">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="8.881432"
+ id="feGaussianBlur3589" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3602">
+ <path
+ sodipodi:nodetypes="czzzzzzczczczczzzc"
+ id="path3604"
+ d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
+ style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter4120"
+ x="-0.2770822"
+ width="1.5541644"
+ y="-0.32482043"
+ height="1.6496409">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="19.956289"
+ id="feGaussianBlur4122" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3631">
+ <path
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+ id="path3633"
+ sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3665">
+ <path
+ sodipodi:nodetypes="czzcczcc"
+ id="path3667"
+ d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
+ style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3677">
+ <path
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+ id="path3679"
+ sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter3898">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="10.892985"
+ id="feGaussianBlur3900" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4130"
+ x="-0.49509686"
+ width="1.9901937"
+ y="-0.26708817"
+ height="1.5341763">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="10.730622"
+ id="feGaussianBlur4132" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4141"
+ x="-0.40611032"
+ width="1.8122206"
+ y="-0.30260596"
+ height="1.6052119">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="9.8586086"
+ id="feGaussianBlur4143" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath4177">
+ <path
+ sodipodi:nodetypes="czzzzzzcccccccccczczz"
+ id="path4179"
+ d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter4185">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="3.6164709"
+ id="feGaussianBlur4187" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4105">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="3.8640966"
+ id="feGaussianBlur4107" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath2833">
+ <path
+ style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
+ id="path2835"
+ sodipodi:nodetypes="czzzcczzcc" />
+ </clipPath>
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient2843"
+ id="linearGradient2841"
+ gradientUnits="userSpaceOnUse"
+ x1="347.89655"
+ y1="1070.2124"
+ x2="275.58191"
+ y2="867.97992" />
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3627"
+ id="linearGradient3688"
+ gradientUnits="userSpaceOnUse"
+ x1="699.32867"
+ y1="269.76755"
+ x2="698.97504"
+ y2="346.1351" />
+ <mask
+ maskUnits="userSpaceOnUse"
+ id="mask3684">
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ id="path3686"
+ sodipodi:cx="579.474"
+ sodipodi:cy="260.57516"
+ sodipodi:rx="192.6866"
+ sodipodi:ry="164.04877"
+ d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
+ transform="translate(-174.03125,62.156036)" />
+ </mask>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3622">
+ <path
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
+ id="path3624"
+ sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3636">
+ <path
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+ id="path3638"
+ sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+ </clipPath>
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3660"
+ id="linearGradient3666"
+ x1="1255.7386"
+ y1="667.09216"
+ x2="893.69995"
+ y2="858.01099"
+ gradientUnits="userSpaceOnUse" />
+ <filter
+ inkscape:collect="always"
+ id="filter3779"
+ x="-0.087980822"
+ width="1.1759616"
+ y="-0.17728332"
+ height="1.3545666">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="16.340344"
+ id="feGaussianBlur3781" />
+ </filter>
+ <filter
+ id="filter3785"
+ inkscape:label="White Fur">
+ <feTurbulence
+ id="feTurbulence3787"
+ in="SourceAlpha"
+ type="fractalNoise"
+ baseFrequency="0.24044943820224721"
+ numOctaves="10"
+ seed="655"
+ result="result0" />
+ <feDisplacementMap
+ id="feDisplacementMap3789"
+ in="SourceGraphic"
+ in2="result0"
+ scale="62"
+ xChannelSelector="B"
+ yChannelSelector="G" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter3677">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="2.0397518"
+ id="feGaussianBlur3679" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3722">
+ <path
+ style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+ id="path3724"
+ sodipodi:nodetypes="czzzzzzzzcc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3986">
+ <path
+ style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+ id="path3988"
+ sodipodi:nodetypes="czzzzzzzzcc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3992">
+ <path
+ style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
+ id="path3994"
+ sodipodi:nodetypes="czzzzzzzzcc" />
+ </clipPath>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath3998">
+ <path
+ style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
+ id="path4000"
+ sodipodi:nodetypes="cscccccccccccc" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter4002"
+ x="-0.24334238"
+ width="1.4866848"
+ y="-0.39104807"
+ height="1.7820961">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="14.589518"
+ id="feGaussianBlur4004" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4010"
+ x="-0.14577261"
+ width="1.2915452"
+ y="-0.23523259"
+ height="1.4704652">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="4.4442907"
+ id="feGaussianBlur4012" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4053">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.6062947"
+ id="feGaussianBlur4055" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4079">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="6.5887624"
+ id="feGaussianBlur4081" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter4083">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.5052066"
+ id="feGaussianBlur4085" />
+ </filter>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient4113"
+ id="radialGradient4119"
+ cx="296.33783"
+ cy="427.17749"
+ fx="296.33783"
+ fy="427.17749"
+ r="19.704132"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
+ <filter
+ inkscape:collect="always"
+ id="filter6949"
+ x="-0.10294895"
+ width="1.2058979"
+ y="-0.34224695"
+ height="1.6844939">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6951" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6953"
+ x="-0.098320946"
+ width="1.1966419"
+ y="-0.19750816"
+ height="1.3950163">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6955" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6957"
+ x="-0.098213427"
+ width="1.1964267"
+ y="-0.19838208"
+ height="1.3967642">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6959" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6961"
+ x="-0.09919104"
+ width="1.1983821"
+ y="-0.22643611"
+ height="1.4528722">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6963" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6965"
+ x="-0.099081434"
+ width="1.1981629"
+ y="-0.22529824"
+ height="1.4505965">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6967" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6969"
+ x="-0.10450897"
+ width="1.2090179"
+ y="-0.40468886"
+ height="1.8093777">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6971" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6973"
+ x="-0.10330495"
+ width="1.2066098"
+ y="-0.36439717"
+ height="1.7287945">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6975" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6977"
+ x="-0.10224481"
+ width="1.2044896"
+ y="-0.32371372"
+ height="1.6474274">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6979" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6981"
+ x="-0.10052545"
+ width="1.2010509"
+ y="-0.2742162"
+ height="1.5484324">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6983" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6985"
+ x="-0.098428868"
+ width="1.1968577"
+ y="-0.20853186"
+ height="1.4170637">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6987" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6989"
+ x="-0.098428868"
+ width="1.1968577"
+ y="-0.20287035"
+ height="1.4057407">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6991" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6993"
+ x="-0.098213255"
+ width="1.1964265"
+ y="-0.19838208"
+ height="1.3967642">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6995" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter6997">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur6999" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7001">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.1675612"
+ id="feGaussianBlur7003" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7285"
+ x="-0.030884685"
+ width="1.0617694"
+ y="-0.10267408"
+ height="1.2053483">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7287" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7289">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7291" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7293">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7295" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7297">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7299" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7301">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7303" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7305">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7307" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7309">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7311" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7313">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7315" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7317">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7319" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7321">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7323" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7325"
+ x="-0.031352691"
+ width="1.0627054"
+ y="-0.12140666"
+ height="1.2428133">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7327" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7329"
+ x="-0.030991485"
+ width="1.061983"
+ y="-0.10931916"
+ height="1.2186383">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7331" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7333">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7335" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7337">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.35026836"
+ id="feGaussianBlur7339" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7345">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.7233839"
+ id="feGaussianBlur7347" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath7421">
+ <path
+ sodipodi:type="inkscape:offset"
+ inkscape:radius="0"
+ inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
+ style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ id="path7423"
+ d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+ transform="translate(8.0045714e-2,-3.125e-2)" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter7578"
+ x="-0.08160872"
+ width="1.1632174"
+ y="-0.22659944"
+ height="1.4531989">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="2.437399"
+ id="feGaussianBlur7580" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter7594"
+ x="-0.040804356"
+ width="1.0816087"
+ y="-0.11329972"
+ height="1.2265995">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="1.2186995"
+ id="feGaussianBlur7596" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath7606">
+ <path
+ id="path7608"
+ d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+ style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter7610"
+ x="-0.021942979"
+ width="1.0438859"
+ y="-0.10017137"
+ height="1.2003427">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="0.57530213"
+ id="feGaussianBlur7612" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath7616">
+ <path
+ id="path7618"
+ d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
+ style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <linearGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient7622"
+ id="linearGradient7708"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="translate(-19.091883,4.2426407)"
+ x1="774.97668"
+ y1="-211.87105"
+ x2="755.11584"
+ y2="-202.67865" />
+ <mask
+ maskUnits="userSpaceOnUse"
+ id="mask7704">
+ <path
+ style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+ d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
+ id="path7706" />
+ </mask>
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient8430"
+ id="radialGradient7904"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
+ cx="142.95833"
+ cy="107.09234"
+ fx="142.95833"
+ fy="107.09234"
+ r="66.981766" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient3317"
+ id="radialGradient7906"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
+ cx="317.78754"
+ cy="129.65378"
+ fx="317.78754"
+ fy="129.65378"
+ r="47.863216" />
+ <radialGradient
+ inkscape:collect="always"
+ xlink:href="#linearGradient8398"
+ id="radialGradient7908"
+ gradientUnits="userSpaceOnUse"
+ gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
+ cx="325.30847"
+ cy="80.909554"
+ fx="325.30847"
+ fy="80.909554"
+ r="26.937988" />
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8209">
+ <path
+ sodipodi:nodetypes="czcc"
+ id="path8211"
+ d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
+ style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter8225">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="10.661912"
+ id="feGaussianBlur8227" />
+ </filter>
+ <filter
+ inkscape:collect="always"
+ id="filter8333">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="7.18"
+ id="feGaussianBlur8335" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8338">
+ <path
+ sodipodi:nodetypes="czzzzzzcccccccccczczz"
+ id="path8340"
+ d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter8354">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="6.82"
+ id="feGaussianBlur8356" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8359">
+ <path
+ sodipodi:nodetypes="czzzzzzcccccccccczczz"
+ id="path8361"
+ d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter8379"
+ x="-0.14413793"
+ width="1.288276"
+ y="-0.10278689"
+ height="1.2055738">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="7.389266"
+ id="feGaussianBlur8381" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8392">
+ <path
+ sodipodi:nodetypes="czzzzzzcccccccccczczz"
+ id="path8394"
+ d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ <filter
+ inkscape:collect="always"
+ id="filter8404"
+ x="-0.090268657"
+ width="1.1805373"
+ y="-0.10250848"
+ height="1.205017">
+ <feGaussianBlur
+ inkscape:collect="always"
+ stdDeviation="5.3457272"
+ id="feGaussianBlur8406" />
+ </filter>
+ <clipPath
+ clipPathUnits="userSpaceOnUse"
+ id="clipPath8417">
+ <path
+ sodipodi:nodetypes="czzzzzzcccccccccczczz"
+ id="path8419"
+ d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </clipPath>
+ </defs>
+ <metadata
+ id="metadata7">
+ <rdf:RDF>
+ <cc:Work
+ rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type
+ rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+ </cc:Work>
+ </rdf:RDF>
+ </metadata>
+ <g
+ inkscape:groupmode="layer"
+ id="layer1"
+ inkscape:label="Shadow">
+ <path
+ style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
+ d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
+ id="path10326"
+ sodipodi:nodetypes="cccccccccsccccccccccc"
+ transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
+ inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
+ inkscape:export-xdpi="142.10527"
+ inkscape:export-ydpi="142.10527" />
+ </g>
+ <g
+ inkscape:groupmode="layer"
+ id="layer20"
+ inkscape:label="New Ear">
+ <g
+ style="opacity:1;display:inline;enable-background:new"
+ id="g7882"
+ transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
+ <path
+ sodipodi:nodetypes="czzzzcc"
+ id="path7876"
+ d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
+ style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ <path
+ sodipodi:nodetypes="czzzzzc"
+ id="path7878"
+ d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
+ style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ <path
+ sodipodi:nodetypes="czccssc"
+ id="path7880"
+ d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
+ style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ </g>
+ </g>
+ <g
+ inkscape:groupmode="layer"
+ id="layer21"
+ inkscape:label="Rendered2"
+ style="display:inline">
+ <path
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
+ id="path7917"
+ sodipodi:nodetypes="czzzcczzcc" />
+ <path
+ style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
+ d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
+ id="path7919"
+ clip-path="url(#clipPath8658)"
+ sodipodi:nodetypes="ccccc"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
+ d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
+ id="path7923"
+ clip-path="url(#clipPath2833)"
+ sodipodi:nodetypes="cccccc"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
+ id="path7921"
+ sodipodi:nodetypes="czzcczcc" />
+ <path
+ style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
+ d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
+ id="path7925"
+ sodipodi:nodetypes="ccccccc"
+ clip-path="url(#clipPath3665)"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
+ id="path7927"
+ sodipodi:nodetypes="czzzzcc" />
+ <path
+ style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
+ d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
+ id="path7929"
+ clip-path="url(#clipPath8642)"
+ sodipodi:nodetypes="ccccc"
+ transform="translate(276,136)" />
+ <g
+ style="opacity:1;display:inline;enable-background:new"
+ id="g7931"
+ transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+ inkscape:transform-center-x="-347.89063"
+ inkscape:transform-center-y="-28.255779">
+ <path
+ style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
+ id="path7933" />
+ <g
+ clip-path="url(#clipPath7616)"
+ style="display:inline;filter:url(#filter7610);enable-background:new"
+ id="g7935"
+ transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
+ <path
+ sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
+ id="path7937"
+ d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ id="path7939"
+ d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ sodipodi:nodetypes="cssccsscc" />
+ <path
+ id="path7941"
+ d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ sodipodi:nodetypes="csccscc" />
+ </g>
+ <g
+ clip-path="url(#clipPath7606)"
+ id="g7943">
+ <path
+ style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
+ d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
+ id="path7945"
+ sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+ <path
+ style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
+ d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
+ id="path7947"
+ sodipodi:nodetypes="czzzzzzzzzzzzzz" />
+ </g>
+ </g>
+ <path
+ style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
+ id="path7949"
+ sodipodi:nodetypes="cscccccccccccc" />
+ <path
+ style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
+ d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
+ id="path7951"
+ sodipodi:nodetypes="ccccczzzcc"
+ clip-path="url(#clipPath8616)"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
+ id="path7953"
+ sodipodi:nodetypes="czcc" />
+ <path
+ style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
+ d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
+ id="path7955"
+ sodipodi:nodetypes="cccc"
+ clip-path="url(#clipPath8209)"
+ transform="translate(276,136)" />
+ <g
+ transform="translate(450.03125,73.843964)"
+ style="opacity:1;display:inline;enable-background:new"
+ id="g7957"
+ clip-path="url(#clipPath3998)">
+ <g
+ transform="translate(-174.03125,62.156036)"
+ style="filter:url(#filter3677)"
+ id="g7959">
+ <g
+ id="g7961"
+ style="filter:url(#filter3785)">
+ <path
+ sodipodi:nodetypes="czzzzzzzzzz"
+ id="path7963"
+ d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <rect
+ y="412.60312"
+ x="343.6539"
+ height="181.01935"
+ width="381.83765"
+ id="rect7965"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ <g
+ id="g7967"
+ style="filter:url(#filter3785)">
+ <path
+ sodipodi:nodetypes="czzzcc"
+ id="path7969"
+ d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ transform="translate(174.03125,-62.156036)" />
+ <rect
+ y="344.82138"
+ x="702.86414"
+ height="162.63455"
+ width="207.8894"
+ id="rect7971"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ </g>
+ <g
+ transform="translate(-174.03125,62.156036)"
+ style="opacity:0.18000004;display:inline;enable-background:new"
+ id="g7973">
+ <g
+ id="g7975"
+ style="filter:url(#filter3785)">
+ <path
+ sodipodi:nodetypes="czzzzzzzzzz"
+ id="path7977"
+ d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <rect
+ y="412.60312"
+ x="343.6539"
+ height="181.01935"
+ width="381.83765"
+ id="rect7979"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ <g
+ id="g7981"
+ style="filter:url(#filter3785)">
+ <path
+ sodipodi:nodetypes="czzzcc"
+ id="path7983"
+ d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ transform="translate(174.03125,-62.156036)" />
+ <rect
+ y="344.82138"
+ x="702.86414"
+ height="162.63455"
+ width="207.8894"
+ id="rect7985"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ </g>
+ </g>
+ <path
+ style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
+ d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
+ id="path7987"
+ clip-path="url(#clipPath8604)"
+ sodipodi:nodetypes="cccccscc"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
+ id="path7989"
+ sodipodi:nodetypes="czzzzzzc" />
+ <path
+ style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
+ id="path7991"
+ sodipodi:nodetypes="czzzzc" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
+ id="path7993"
+ sodipodi:cx="385"
+ sodipodi:cy="237.00504"
+ sodipodi:rx="86.428574"
+ sodipodi:ry="73.928574"
+ d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
+ transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
+ clip-path="url(#clipPath4100)" />
+ <path
+ transform="translate(450.03125,73.843964)"
+ style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
+ id="path7995"
+ sodipodi:nodetypes="csczzc"
+ mask="url(#mask3684)" />
+ <path
+ style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
+ id="path7997"
+ sodipodi:nodetypes="czcc" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ id="path7999"
+ sodipodi:cx="409.28571"
+ sodipodi:cy="306.64789"
+ sodipodi:rx="36.25"
+ sodipodi:ry="36.25"
+ d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
+ transform="translate(449.49554,74.915393)" />
+ <path
+ style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
+ d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
+ id="path8001"
+ sodipodi:nodetypes="cccccccccc"
+ clip-path="url(#clipPath8616)"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
+ d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
+ id="path8003"
+ sodipodi:nodetypes="czzcc" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ id="path8005"
+ sodipodi:cx="410"
+ sodipodi:cy="306.64789"
+ sodipodi:rx="23.214285"
+ sodipodi:ry="23.214285"
+ d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
+ transform="translate(449.67411,74.915393)" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
+ id="path8007"
+ sodipodi:cx="414.28571"
+ sodipodi:cy="303.07648"
+ sodipodi:rx="7.5"
+ sodipodi:ry="7.5"
+ d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
+ transform="translate(451.99554,73.486821)" />
+ <path
+ style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
+ id="path8009"
+ sodipodi:nodetypes="czzzczc" />
+ <g
+ style="opacity:1;display:inline;enable-background:new"
+ id="g8011"
+ transform="translate(780.74553,74.55825)">
+ <path
+ transform="translate(-329.81481,0)"
+ clip-path="url(#clipPath3999)"
+ sodipodi:nodetypes="czzczzzszc"
+ id="path8013"
+ d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+ style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
+ <path
+ transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
+ d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+ sodipodi:ry="134.00607"
+ sodipodi:rx="64.715881"
+ sodipodi:cy="338.07648"
+ sodipodi:cx="183.57143"
+ id="path8015"
+ style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ <path
+ transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
+ d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
+ sodipodi:ry="134.00607"
+ sodipodi:rx="64.715881"
+ sodipodi:cy="338.07648"
+ sodipodi:cx="183.57143"
+ id="path8017"
+ style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ <path
+ transform="translate(-329.81481,3e-7)"
+ clip-path="url(#clipPath3999)"
+ sodipodi:nodetypes="czzczzzszc"
+ id="path8019"
+ d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
+ </g>
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ id="path8021"
+ sodipodi:cx="310.71429"
+ sodipodi:cy="398.07648"
+ sodipodi:rx="19.704132"
+ sodipodi:ry="19.704132"
+ d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+ transform="translate(452.55663,72.581273)" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
+ id="path8023"
+ sodipodi:cx="310.71429"
+ sodipodi:cy="398.07648"
+ sodipodi:rx="19.704132"
+ sodipodi:ry="19.704132"
+ d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+ transform="translate(450.55663,72.581273)" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ id="path8025"
+ sodipodi:cx="310.71429"
+ sodipodi:cy="398.07648"
+ sodipodi:rx="19.704132"
+ sodipodi:ry="19.704132"
+ d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
+ transform="translate(450.55663,72.581273)" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
+ id="path8027"
+ sodipodi:cx="429.56738"
+ sodipodi:cy="377.42877"
+ sodipodi:rx="72.079735"
+ sodipodi:ry="44.547726"
+ d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
+ transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
+ inkscape:transform-center-x="-47.231976"
+ inkscape:transform-center-y="-3.6935079" />
+ <path
+ sodipodi:type="arc"
+ style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
+ id="path8029"
+ sodipodi:cx="437.6991"
+ sodipodi:cy="391.21735"
+ sodipodi:rx="36.611931"
+ sodipodi:ry="22.627417"
+ d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
+ transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
+ inkscape:transform-center-x="-20.955902"
+ inkscape:transform-center-y="-13.056625" />
+ <g
+ transform="translate(450.03125,73.843964)"
+ id="g8031"
+ style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
+ <path
+ d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+ sodipodi:ry="3.2142856"
+ sodipodi:rx="3.2142856"
+ sodipodi:cy="401.82648"
+ sodipodi:cx="413.66071"
+ id="path8033"
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ <path
+ transform="translate(13.125009,8.1249913)"
+ d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+ sodipodi:ry="3.2142856"
+ sodipodi:rx="3.2142856"
+ sodipodi:cy="401.82648"
+ sodipodi:cx="413.66071"
+ id="path8035"
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ <path
+ transform="translate(32.946437,7.4999913)"
+ d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+ sodipodi:ry="3.2142856"
+ sodipodi:rx="3.2142856"
+ sodipodi:cy="401.82648"
+ sodipodi:cx="413.66071"
+ id="path8037"
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ <path
+ transform="translate(24.910723,-10.267866)"
+ d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+ sodipodi:ry="3.2142856"
+ sodipodi:rx="3.2142856"
+ sodipodi:cy="401.82648"
+ sodipodi:cx="413.66071"
+ id="path8039"
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ <path
+ transform="translate(47.589294,-0.6250087)"
+ d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
+ sodipodi:ry="3.2142856"
+ sodipodi:rx="3.2142856"
+ sodipodi:cy="401.82648"
+ sodipodi:cx="413.66071"
+ id="path8041"
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ sodipodi:type="arc" />
+ </g>
+ <path
+ style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
+ id="path8043"
+ sodipodi:nodetypes="ccccccccc" />
+ <path
+ style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
+ id="path8045"
+ sodipodi:nodetypes="cccccccccccc" />
+ <path
+ style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
+ id="path8047"
+ sodipodi:nodetypes="ccccccccccccc" />
+ <path
+ style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
+ d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
+ id="path8049"
+ clip-path="url(#clipPath8514)"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
+ id="path8051" />
+ <path
+ style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+ d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
+ id="path8053"
+ clip-path="url(#clipPath8610)"
+ sodipodi:nodetypes="cccccscccc"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
+ id="path8055"
+ sodipodi:nodetypes="czzzzzzczczczczzzc" />
+ <path
+ style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
+ d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
+ id="path8057"
+ clip-path="url(#clipPath8622)"
+ sodipodi:nodetypes="cccccccccc"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
+ d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
+ id="path8059"
+ clip-path="url(#clipPath8906)"
+ sodipodi:nodetypes="cczcccccc"
+ transform="translate(276,136)" />
+ <path
+ transform="translate(450.03125,73.843964)"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
+ d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
+ id="path8061"
+ sodipodi:nodetypes="cccccccccccc"
+ clip-path="url(#clipPath3602)" />
+ <path
+ style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
+ d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
+ id="path8063"
+ sodipodi:nodetypes="czzzzzzzzcc" />
+ <path
+ transform="translate(450.03125,73.843964)"
+ style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
+ d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
+ id="path8065"
+ sodipodi:nodetypes="czczzcc"
+ clip-path="url(#clipPath3992)" />
+ <g
+ transform="translate(450.03125,73.843964)"
+ style="opacity:1;display:inline;enable-background:new"
+ id="g8067"
+ clip-path="url(#clipPath3986)">
+ <g
+ transform="translate(-174.03125,62.156036)"
+ style="filter:url(#filter3677)"
+ id="g8069">
+ <g
+ style="filter:url(#filter3785)"
+ id="g8071">
+ <path
+ sodipodi:nodetypes="czzccccc"
+ id="path8073"
+ d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ transform="translate(174.03125,-62.156036)" />
+ <rect
+ y="486.14224"
+ x="1197.8389"
+ height="309.71277"
+ width="333.75412"
+ id="rect8075"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ </g>
+ <g
+ transform="translate(-174.03125,62.156036)"
+ style="opacity:0.18000004;display:inline;enable-background:new"
+ id="g8077">
+ <g
+ style="filter:url(#filter3785)"
+ id="g8079">
+ <path
+ sodipodi:nodetypes="czzccccc"
+ id="path8081"
+ d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ transform="translate(174.03125,-62.156036)" />
+ <rect
+ y="486.14224"
+ x="1197.8389"
+ height="309.71277"
+ width="333.75412"
+ id="rect8083"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ </g>
+ </g>
+ <path
+ transform="translate(450.03125,73.843964)"
+ style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
+ d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
+ id="path8085"
+ clip-path="url(#clipPath3722)"
+ sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
+ <g
+ style="opacity:1;display:inline;enable-background:new"
+ id="g8087"
+ mask="url(#mask7704)"
+ transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
+ inkscape:transform-center-x="-185.09603"
+ inkscape:transform-center-y="-12.859654">
+ <path
+ transform="translate(8.0045714e-2,-3.125e-2)"
+ style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
+ id="path8089"
+ sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
+ <g
+ clip-path="url(#clipPath7421)"
+ id="g8091">
+ <path
+ id="path8093"
+ d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
+ sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+ <path
+ id="path8095"
+ d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
+ <path
+ id="path8097"
+ d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
+ <path
+ id="path8099"
+ d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
+ <path
+ id="path8101"
+ d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
+ sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+ <path
+ id="path8103"
+ d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
+ <path
+ id="path8105"
+ d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
+ <path
+ id="path8107"
+ d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
+ <path
+ id="path8109"
+ d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
+ <path
+ id="path8111"
+ d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
+ <path
+ id="path8113"
+ d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
+ <path
+ id="path8115"
+ d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
+ <path
+ id="path8117"
+ d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
+ <path
+ id="path8119"
+ d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+ style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
+ <g
+ id="g8121"
+ style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
+ <path
+ sodipodi:nodetypes="czzzczzc"
+ id="path8123"
+ d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ <path
+ sodipodi:nodetypes="czzzczzc"
+ id="path8125"
+ d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ sodipodi:nodetypes="czzzczzc"
+ id="path8127"
+ d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ sodipodi:nodetypes="czzzczzc"
+ id="path8129"
+ d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-4.3190906"
+ inkscape:transform-center-x="13.852145"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8131"
+ d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-4.3190906"
+ inkscape:transform-center-x="13.852145"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8133"
+ d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-4.3190906"
+ inkscape:transform-center-x="13.852145"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8135"
+ d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-4.9269042"
+ inkscape:transform-center-x="13.64141"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8137"
+ d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.1542119"
+ inkscape:transform-center-x="13.55068"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8139"
+ d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.4740887"
+ inkscape:transform-center-x="13.41151"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8141"
+ d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.79376"
+ inkscape:transform-center-x="13.258805"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8143"
+ d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8145"
+ d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8147"
+ d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8149"
+ d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8151"
+ d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8153"
+ d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8155"
+ d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8157"
+ d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8159"
+ d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8161"
+ d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.7433893"
+ inkscape:transform-center-x="13.28378"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8163"
+ d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-5.1360724"
+ inkscape:transform-center-x="13.55813"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8165"
+ d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-4.6370147"
+ inkscape:transform-center-x="13.74758"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8167"
+ d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ inkscape:transform-center-y="-4.4842392"
+ inkscape:transform-center-x="13.79933"
+ sodipodi:nodetypes="czzzczzc"
+ id="path8169"
+ d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
+ <path
+ sodipodi:nodetypes="czczc"
+ id="path8171"
+ d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
+ style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
+ </g>
+ <path
+ id="path8173"
+ d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
+ sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
+ <path
+ id="path8175"
+ d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
+ <path
+ id="path8177"
+ d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
+ <path
+ id="path8179"
+ d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
+ <path
+ id="path8181"
+ d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
+ sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
+ <path
+ id="path8183"
+ d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
+ <path
+ id="path8185"
+ d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
+ <path
+ id="path8187"
+ d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
+ <path
+ id="path8189"
+ d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
+ <path
+ id="path8191"
+ d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
+ <path
+ id="path8193"
+ d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
+ <path
+ id="path8195"
+ d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
+ <path
+ id="path8197"
+ d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
+ <path
+ id="path8199"
+ d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
+ </g>
+ </g>
+ <path
+ style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
+ id="path8201"
+ sodipodi:nodetypes="ccccccccc" />
+ <path
+ style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
+ id="path8203"
+ sodipodi:nodetypes="ccccccccccc" />
+ </g>
+ <g
+ inkscape:groupmode="layer"
+ id="layer15"
+ inkscape:label="Feet"
+ style="display:inline">
+ <path
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
+ d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
+ id="path8994" />
+ <path
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
+ id="path4189"
+ sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+ <path
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+ d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+ id="path4191"
+ sodipodi:nodetypes="cccccccccccccccccccccc"
+ clip-path="url(#clipPath3631)"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+ <path
+ style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+ d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+ id="path4193"
+ clip-path="url(#clipPath3677)"
+ sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+ <g
+ id="g3617"
+ clip-path="url(#clipPath3622)"
+ transform="translate(276,136)">
+ <path
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
+ id="path4195"
+ d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+ <path
+ sodipodi:nodetypes="ccccccccccccc"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
+ id="path4197"
+ d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+ </g>
+ <path
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+ d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
+ id="path4199"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
+ <path
+ style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
+ d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+ id="path4201"
+ sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+ clip-path="url(#clipPath4177)"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
+ <path
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+ d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+ id="path4203"
+ sodipodi:nodetypes="cccccccc"
+ clip-path="url(#clipPath3631)"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+ <path
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+ d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+ id="path4205"
+ sodipodi:nodetypes="cccccccc"
+ clip-path="url(#clipPath3631)"
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
+ <g
+ id="g8317"
+ style="filter:url(#filter8333)"
+ clip-path="url(#clipPath8338)"
+ transform="translate(276,136)">
+ <path
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+ clip-path="none"
+ sodipodi:nodetypes="ccccc"
+ id="path4209"
+ d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ <rect
+ y="757.19519"
+ x="-55"
+ height="177"
+ width="182"
+ id="rect8315"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ <g
+ id="g8346"
+ style="filter:url(#filter8354)"
+ clip-path="url(#clipPath8359)"
+ transform="translate(276,136)">
+ <path
+ transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
+ clip-path="none"
+ sodipodi:nodetypes="ccccccc"
+ id="path4207"
+ d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ <rect
+ y="696.19519"
+ x="-22"
+ height="176"
+ width="165"
+ id="rect8344"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ </g>
+ <g
+ inkscape:groupmode="layer"
+ id="layer16"
+ inkscape:label="Left Foot"
+ style="display:inline">
+ <path
+ style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
+ d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
+ id="path8848"
+ sodipodi:nodetypes="czzzzzzcccccccccczczz" />
+ <path
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
+ d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
+ id="path3635"
+ sodipodi:nodetypes="cccccccccccccccccccccc"
+ clip-path="url(#clipPath3631)"
+ transform="translate(276,136)" />
+ <path
+ transform="translate(450.03125,73.843964)"
+ style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
+ d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
+ id="path3669"
+ clip-path="url(#clipPath3677)"
+ sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
+ <g
+ id="g3628"
+ clip-path="url(#clipPath3636)"
+ transform="translate(276,136)">
+ <path
+ id="path8988"
+ d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
+ <path
+ id="path8990"
+ d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
+ </g>
+ <path
+ style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
+ d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
+ id="path8992" />
+ <path
+ transform="translate(450.03125,73.843964)"
+ style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
+ d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
+ id="path4149"
+ sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
+ clip-path="url(#clipPath4177)" />
+ <path
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
+ d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
+ id="path3902"
+ sodipodi:nodetypes="cccccccc"
+ clip-path="url(#clipPath3631)"
+ transform="translate(276,136)" />
+ <path
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
+ d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
+ id="path4135"
+ sodipodi:nodetypes="cccccccc"
+ clip-path="url(#clipPath3631)"
+ transform="translate(276,136)" />
+ <g
+ id="g8367"
+ style="filter:url(#filter8379)"
+ clip-path="url(#clipPath8392)"
+ transform="translate(276,136)">
+ <path
+ clip-path="none"
+ sodipodi:nodetypes="ccccccc"
+ id="path4145"
+ d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ <rect
+ y="650.19098"
+ x="877.51953"
+ height="172.53406"
+ width="123.03658"
+ id="rect8365"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ <g
+ id="g8400"
+ style="filter:url(#filter8404)"
+ clip-path="url(#clipPath8417)"
+ transform="translate(276,136)">
+ <path
+ clip-path="none"
+ sodipodi:nodetypes="ccccc"
+ id="path4147"
+ d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
+ style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ <rect
+ y="677.06104"
+ x="924.89569"
+ height="125.1579"
+ width="142.12846"
+ id="rect8398"
+ style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
+ </g>
+ </g>
+</svg>
diff --git a/Documentation/logo.txt b/Documentation/logo.txt
index 296f0f7..a2e6244 100644
--- a/Documentation/logo.txt
+++ b/Documentation/logo.txt
@@ -1,13 +1,4 @@
-This is the full-colour version of the currently unofficial Linux logo
-("currently unofficial" just means that there has been no paperwork and
-that I have not really announced it yet). It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist.
+Tux is taking a three month sabbatical to work as a barber, so Tuz is
+standing in. He's taken pains to ensure you'll hardly notice.
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
- http://www.isc.tamu.edu/~lewing/linux/
-
+Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA.
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644
index 0000000..268e5c1
--- /dev/null
+++ b/Documentation/networking/ipv6.txt
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below. If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+ Specifies whether to load the IPv6 module, but disable all
+ its functionality. This might be used when another module
+ has a dependency on the IPv6 module being loaded, but no
+ IPv6 addresses or operations are desired.
+
+ The possible values and their effects are:
+
+ 0
+ IPv6 is enabled.
+
+ This is the default value.
+
+ 1
+ IPv6 is disabled.
+
+ No IPv6 addresses will be added to interfaces, and
+ it will not be possible to open an IPv6 socket.
+
+ A reboot is required to enable IPv6.
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c2ca1d..50725d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -622,7 +622,7 @@
M: dirk@opfer-online.de
S: Maintained
-ARM/PALMTX SUPPORT
+ARM/PALMTX,PALMT5,PALMLD SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com
@@ -1469,8 +1469,6 @@
S: Supported
DOCUMENTATION (/Documentation directory)
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
P: Randy Dunlap
M: rdunlap@xenotime.net
L: linux-doc@vger.kernel.org
@@ -2879,7 +2877,7 @@
M: mtk.manpages@gmail.com
W: http://www.kernel.org/doc/man-pages
L: linux-man@vger.kernel.org
-S: Supported
+S: Maintained
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
@@ -3352,10 +3350,8 @@
PARISC ARCHITECTURE
P: Kyle McMartin
M: kyle@mcmartin.ca
-P: Matthew Wilcox
-M: matthew@wil.cx
-P: Grant Grundler
-M: grundler@parisc-linux.org
+P: Helge Deller
+M: deller@gmx.de
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -3543,6 +3539,22 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+PXA168 SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+P: Jason Chagas
+M: jason.chagas@marvell.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S: Supported
+
+PXA910 SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S: Supported
+
PXA MMCI DRIVER
S: Orphan
@@ -3880,6 +3892,15 @@
T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
+SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
+P: Sathya Perla
+M: sathyap@serverengines.com
+P: Subbu Seetharaman
+M: subbus@serverengines.com
+L: netdev@vger.kernel.org
+W: http://www.serverengines.com
+S: Supported
+
SFC NETWORK DRIVER
P: Steve Hodgson
P: Ben Hutchings
diff --git a/Makefile b/Makefile
index d04ee0a..1ab3ebf 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc7
-NAME = Erotic Pickled Herring
+EXTRAVERSION =
+NAME = Temporary Tasmanian Devil
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@@ -566,6 +566,12 @@
# disable pointer signed / unsigned warnings in gcc 4.0
KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+# disable invalid "can't wrap" optimzations for signed / pointers
+KBUILD_CFLAGS += $(call cc-option,-fwrapv)
+
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
# But warn user when we do so
warn-assign = \
@@ -904,12 +910,18 @@
# and if the SCM is know a tag from the SCM is appended.
# The appended tag is determined by the SCM used.
#
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
ifdef CONFIG_LOCALVERSION_AUTO
- _localver-auto = $(shell $(CONFIG_SHELL) \
- $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion $(srctree))
+else
+ _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
localver-auto = $(LOCALVERSION)$(_localver-auto)
endif
@@ -1537,7 +1549,7 @@
cmd_depmod = \
if [ -r System.map -a -x $(DEPMOD) ]; then \
$(DEPMOD) -ae -F System.map \
- $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \
+ $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
$(KERNELRELEASE); \
fi
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87..e62b37a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -241,6 +241,7 @@
config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
This enables support for systems based on the Atmel AT91RM9200,
@@ -477,12 +478,29 @@
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
+ select PLAT_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+config ARCH_MMP
+ bool "Marvell PXA168/910"
+ depends on MMU
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168/910 processor line.
+
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
@@ -617,6 +635,9 @@
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
@@ -686,12 +707,15 @@
config PLAT_ORION
bool
+config PLAT_PXA
+ bool
+
source arch/arm/mm/Kconfig
config IWMMXT
bool "Enable iWMMXt support"
- depends on CPU_XSCALE || CPU_XSC3
- default y if PXA27x || PXA3xx
+ depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+ default y if PXA27x || PXA3xx || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
@@ -915,6 +939,23 @@
default "2"
depends on NEED_MULTIPLE_NODES
+config HIGHMEM
+ bool "High Memory Support (EXPERIMENTAL)"
+ depends on MMU && EXPERIMENTAL
+ help
+ The address space of ARM processors is only 4 Gigabytes large
+ and it has to accommodate user address space, kernel address
+ space as well as some memory mapped IO. That means that, if you
+ have a large amount of physical memory and/or IO, not all of the
+ memory can be "permanently mapped" by the kernel. The physical
+ memory that is not permanently mapped is called "high memory".
+
+ Depending on the selected kernel/user memory split, minimum
+ vmalloc space and actual amount of RAM, you may not need this
+ option which should result in a slightly faster kernel.
+
+ If unsure, say n.
+
source "mm/Kconfig"
config LEDS
@@ -1092,7 +1133,7 @@
config CPU_FREQ_SA1100
bool
- depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
+ depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 192ee01..a71fd94 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,18 +2,29 @@
source "lib/Kconfig.debug"
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
- default y
+ default y if !ARM_UNWIND
help
If you say N here, the resulting kernel will be slightly smaller and
- faster. However, when a problem occurs with the kernel, the
- information that is reported is severely limited. Most people
- should say Y here.
+ faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
+ when a problem occurs with the kernel, the information that is
+ reported is severely limited.
+
+config ARM_UNWIND
+ bool "Enable stack unwinding support"
+ depends on AEABI && EXPERIMENTAL
+ default y
+ help
+ This option enables stack unwinding support in the kernel
+ using the information automatically generated by the
+ compiler. The resulting kernel image is slightly bigger but
+ the performance is not affected. Currently, this feature
+ only works with EABI compilers. If unsure say Y.
config DEBUG_USER
bool "Verbose user fault messages"
@@ -66,7 +77,7 @@
Say Y here if you want the debug print routines to direct their
output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
- channel.
+ channel and on the XScale with the PEEDI.
It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 24e0f01..95186ef 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -85,6 +85,10 @@
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
endif
+ifeq ($(CONFIG_ARM_UNWIND),y)
+CFLAGS_ABI +=-funwind-tables
+endif
+
# Need -Uarm for gcc < 3.x
KBUILD_CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
KBUILD_AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
@@ -105,6 +109,8 @@
textofs-$(CONFIG_SA1111) := 0x00208000
endif
machine-$(CONFIG_ARCH_PXA) := pxa
+ machine-$(CONFIG_ARCH_MMP) := mmp
+ plat-$(CONFIG_PLAT_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 77d61423..d14b827 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,12 @@
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
+#elif defined(CONFIG_CPU_XSCALE)
+ .macro loadsp, rb
+ .endm
+ .macro writeb, ch, rb
+ mcr p14, 0, \ch, c8, c0, 0
+ .endm
#else
.macro loadsp, rb
.endm
@@ -630,6 +636,18 @@
b __armv4_mmu_cache_off
b __armv4_mmu_cache_flush
+ .word 0x56158000 @ PXA168
+ .word 0xfffff000
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv5tej_mmu_cache_flush
+
+ .word 0x56056930
+ .word 0xff0ffff0 @ PXA935
+ b __armv4_mmu_cache_on
+ b __armv4_mmu_cache_off
+ b __armv4_mmu_cache_flush
+
.word 0x56050000 @ Feroceon
.word 0xff0f0000
b __armv4_mmu_cache_on
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 3fc0841..393c816 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -46,6 +46,21 @@
asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}
+#elif defined(CONFIG_CPU_XSCALE)
+
+static void icedcc_putc(int ch)
+{
+ int status, i = 0x4000000;
+
+ do {
+ if (--i < 0)
+ return;
+
+ asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
+ } while (status & (1 << 28));
+
+ asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
+}
#else
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 153a07e..a5924b9 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -11,6 +11,11 @@
ENTRY(_start)
SECTIONS
{
+ /DISCARD/ : {
+ *(.ARM.exidx*)
+ *(.ARM.extab*)
+ }
+
. = TEXT_START;
_text = .;
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index f030f07..734ac91 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/page-flags.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
@@ -349,6 +350,12 @@
BUG_ON(!valid_dma_direction(dir));
+ if (PageHighMem(page)) {
+ dev_err(dev, "DMA buffer bouncing of HIGHMEM pages "
+ "is not supported\n");
+ return ~0;
+ }
+
return map_single(dev, page_address(page) + offset, size, dir);
}
EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 697c649..7713a08 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -124,37 +124,6 @@
return 0;
}
-unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
-{
- unsigned short gpio_bit;
- unsigned long flag;
- struct scoop_dev *sdev = dev_get_drvdata(dev);
-
- spin_lock_irqsave(&sdev->scoop_lock, flag);
- gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
- iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
- spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
- return gpio_bit;
-}
-
-unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
-{
- unsigned short gpio_bit;
- unsigned long flag;
- struct scoop_dev *sdev = dev_get_drvdata(dev);
-
- spin_lock_irqsave(&sdev->scoop_lock, flag);
- gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
- iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
- spin_unlock_irqrestore(&sdev->scoop_lock, flag);
-
- return gpio_bit;
-}
-
-EXPORT_SYMBOL(set_scoop_gpio);
-EXPORT_SYMBOL(reset_scoop_gpio);
-
unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
{
struct scoop_dev *sdev = dev_get_drvdata(dev);
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 780bbf7..140f1d7 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -29,8 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/regs-rtc.h>
#include <mach/sharpsl.h>
#include <asm/hardware/sharpsl_pm.h>
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
new file mode 100644
index 0000000..1cab4e7
--- /dev/null
+++ b/arch/arm/configs/acs5k_defconfig
@@ -0,0 +1,1233 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Dec 16 13:31:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+CONFIG_MACH_KS8695=y
+CONFIG_MACH_DSM320=y
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_PRISM54=m
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
new file mode 100644
index 0000000..8e3d084
--- /dev/null
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -0,0 +1,941 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-simtec-micrel1
+# Tue Jan 6 13:23:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+CONFIG_ARCH_KS8695=y
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Kendin/Micrel KS8695 Implementations
+#
+# CONFIG_MACH_KS8695 is not set
+# CONFIG_MACH_DSM320 is not set
+CONFIG_MACH_ACS5K=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM922T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_KS8695_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_KS8695=y
+CONFIG_SERIAL_KS8695_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_ACS5KCAN=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_KS8695_WATCHDOG=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index b1cd331..c66dd39 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -89,7 +89,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 80222fe..f264846 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -91,7 +91,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
CONFIG_SA1100_BADGE4=y
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index ee130b5..2b4c066 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -93,7 +93,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
similarity index 83%
rename from arch/arm/configs/xm_x2xx_defconfig
rename to arch/arm/configs/cm_x2xx_defconfig
index 1039f366..797b790 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct 5 11:05:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb 1 16:31:36 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,7 +22,6 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -47,12 +46,12 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -80,27 +79,21 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -108,11 +101,9 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -129,6 +120,11 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
#
# System Type
@@ -138,7 +134,6 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -165,17 +160,19 @@
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
@@ -185,7 +182,9 @@
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
-CONFIG_MACH_EM_X270=y
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
@@ -204,14 +203,6 @@
# CONFIG_PXA_PWM is not set
#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
# Processor Type
#
CONFIG_CPU_32=y
@@ -232,6 +223,8 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_DMABOUNCE=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -242,6 +235,7 @@
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
@@ -287,14 +281,13 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -327,6 +320,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -345,6 +340,7 @@
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -389,6 +385,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -399,6 +396,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -420,8 +418,6 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
@@ -434,15 +430,15 @@
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -467,6 +463,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -521,9 +518,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
@@ -535,6 +530,8 @@
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -563,6 +560,12 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -642,6 +645,8 @@
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -756,26 +761,30 @@
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
+CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
@@ -783,10 +792,12 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -797,8 +808,6 @@
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
# CONFIG_LIBERTAS_CS is not set
@@ -811,10 +820,16 @@
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -879,22 +894,22 @@
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -933,6 +948,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
@@ -1009,26 +1025,45 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -1043,17 +1078,19 @@
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -1064,11 +1101,17 @@
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
+CONFIG_UCB1400_CORE=m
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1077,13 +1120,117 @@
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
@@ -1095,6 +1242,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1128,6 +1276,7 @@
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -1138,13 +1287,17 @@
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
#
# Display device support
@@ -1167,6 +1320,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1182,81 +1336,16 @@
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
@@ -1269,9 +1358,37 @@
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1291,12 +1408,15 @@
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -1306,6 +1426,8 @@
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
@@ -1314,20 +1436,20 @@
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1355,6 +1477,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1371,13 +1494,20 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1385,11 +1515,12 @@
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
@@ -1400,8 +1531,7 @@
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
+CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_PCA955X is not set
#
@@ -1410,6 +1540,7 @@
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -1441,37 +1572,43 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1483,14 +1620,16 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1520,15 +1659,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1548,6 +1685,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1567,6 +1705,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1678,19 +1817,29 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1705,13 +1854,16 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1783,14 +1935,18 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
similarity index 75%
rename from arch/arm/configs/colibri_defconfig
rename to arch/arm/configs/colibri_pxa270_defconfig
index 744086f..4cf3bde 100644
--- a/arch/arm/configs/colibri_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec 3 13:36:09 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:18:17 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,8 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -42,22 +43,30 @@
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -70,29 +79,38 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -106,6 +124,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
#
# System Type
@@ -115,9 +134,7 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@@ -131,41 +148,58 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
CONFIG_MACH_COLIBRI=y
+# CONFIG_MACH_COLIBRI300 is not set
# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_PXA_PWM is not set
#
# Processor Type
@@ -174,6 +208,7 @@
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@@ -187,6 +222,7 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -198,28 +234,33 @@
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -232,6 +273,12 @@
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -246,6 +293,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -253,21 +302,18 @@
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -275,6 +321,7 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -304,26 +351,26 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
@@ -332,7 +379,9 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
@@ -342,12 +391,14 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
CONFIG_IRDA=m
#
@@ -382,15 +433,6 @@
# CONFIG_KS959_DONGLE is not set
#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
@@ -410,7 +452,6 @@
#
# Bluetooth device drivers
#
-# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
@@ -419,21 +460,20 @@
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=y
+CONFIG_LIB80211_CRYPT_CCMP=y
+CONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -448,6 +488,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -457,9 +499,11 @@
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -510,9 +554,7 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
@@ -538,6 +580,7 @@
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
@@ -556,6 +599,11 @@
# CONFIG_MTD_ONENAND_SIM is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -569,36 +617,41 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=8
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -610,7 +663,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -631,6 +683,10 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -638,11 +694,17 @@
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -654,10 +716,15 @@
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_ZD1211RW is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -670,7 +737,6 @@
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -710,6 +776,7 @@
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
@@ -718,20 +785,25 @@
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
@@ -746,9 +818,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -764,45 +838,50 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PXA is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PXA is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
@@ -811,16 +890,35 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -828,7 +926,10 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@@ -848,6 +949,7 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
@@ -856,6 +958,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -863,9 +966,12 @@
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -879,23 +985,46 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -907,6 +1036,7 @@
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -914,8 +1044,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -928,13 +1058,20 @@
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
@@ -964,12 +1101,7 @@
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
@@ -979,18 +1111,26 @@
# USB Input Devices
#
# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_APPLE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -999,29 +1139,40 @@
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
@@ -1029,19 +1180,14 @@
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
@@ -1059,6 +1205,7 @@
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
@@ -1066,17 +1213,21 @@
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@@ -1085,7 +1236,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1101,30 +1252,29 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
@@ -1134,21 +1284,32 @@
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
@@ -1163,6 +1324,8 @@
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
@@ -1190,6 +1353,9 @@
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1199,36 +1365,45 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -1254,15 +1429,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
@@ -1283,9 +1456,13 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1293,20 +1470,18 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1361,9 +1536,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1371,6 +1543,7 @@
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1378,9 +1551,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1396,16 +1572,40 @@
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -1415,58 +1615,114 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
new file mode 100644
index 0000000..4774a36
--- /dev/null
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -0,0 +1,1156 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 16:13:20 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+CONFIG_MACH_COLIBRI300=y
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_RAUMFELD_PROTO is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_AX88796=y
+# CONFIG_AX88796_93CX6 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index f7622e6..1aa6224 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -113,7 +113,6 @@
CONFIG_SA1100_COLLIE=y
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/em_x270_defconfig
similarity index 74%
copy from arch/arm/configs/xm_x2xx_defconfig
copy to arch/arm/configs/em_x270_defconfig
index 1039f366..e9955b7 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Sun Oct 5 11:05:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Sun Feb 1 16:43:31 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -47,12 +45,12 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -80,27 +78,20 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -108,11 +99,9 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -129,6 +118,11 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
#
# System Type
@@ -138,7 +132,6 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -165,17 +158,19 @@
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
@@ -185,33 +180,26 @@
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
-CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
# Processor Type
#
CONFIG_CPU_32=y
@@ -232,36 +220,14 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
+# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
-# CONFIG_YENTA_ENE_TUNE is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
+# CONFIG_PCCARD is not set
#
# Kernel Features
@@ -287,14 +253,12 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -309,7 +273,21 @@
#
# CPU Power Management
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_IDLE is not set
#
@@ -327,6 +305,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -338,13 +318,14 @@
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=m
+CONFIG_APM_EMULATION=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -389,6 +370,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -399,6 +381,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -420,29 +403,23 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -467,6 +444,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -521,20 +499,18 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
-# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -551,32 +527,31 @@
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_GPIO=m
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_CM_X270=y
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
@@ -625,117 +600,10 @@
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -743,78 +611,47 @@
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
+# CONFIG_SMSC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -822,10 +659,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
@@ -838,7 +672,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -861,7 +694,7 @@
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
+CONFIG_INPUT_APMPOWER=y
#
# Input Device Drivers
@@ -873,15 +706,18 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -895,6 +731,7 @@
# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -902,7 +739,6 @@
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -917,7 +753,6 @@
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -931,26 +766,16 @@
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
@@ -961,24 +786,6 @@
#
#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
@@ -995,11 +802,6 @@
# CONFIG_I2C_TINY_USB is not set
#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
@@ -1015,20 +817,39 @@
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -1038,22 +859,29 @@
#
# PCI GPIO expanders:
#
-# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -1065,10 +893,16 @@
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1077,24 +911,121 @@
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=m
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1113,38 +1044,27 @@
#
# Frame buffer hardware drivers
#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
+# CONFIG_FB_MBX_DEBUG is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
#
# Display device support
@@ -1167,6 +1087,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1182,82 +1103,21 @@
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_DRIVERS is not set
CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
@@ -1269,13 +1129,41 @@
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -1291,21 +1179,22 @@
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
@@ -1314,20 +1203,20 @@
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1355,6 +1244,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1371,13 +1261,19 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1385,12 +1281,11 @@
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
@@ -1401,8 +1296,8 @@
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_CM_X270=y
# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=y
#
# LED Triggers
@@ -1410,6 +1305,7 @@
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
@@ -1441,37 +1337,48 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_DA903X=y
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1483,14 +1390,17 @@
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1520,15 +1430,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1548,6 +1456,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1567,6 +1476,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1652,7 +1562,7 @@
CONFIG_FRAME_WARN=0
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -1678,19 +1588,29 @@
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1705,13 +1625,24 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1731,7 +1662,7 @@
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
@@ -1748,7 +1679,7 @@
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
@@ -1762,9 +1693,9 @@
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
@@ -1783,14 +1714,18 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 8f986e9..1502957 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_H3800 is not set
CONFIG_SA1100_H3XXX=y
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
@@ -100,7 +99,6 @@
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_SSP is not set
-# CONFIG_H3600_SLEEVE is not set
#
# Processor Type
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 1c8fb89..db0708d 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -91,7 +91,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
CONFIG_SA1100_HACKKIT=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 81fadaf..f3074e4 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -178,7 +178,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
CONFIG_SA1100_JORNADA720=y
CONFIG_SA1100_JORNADA720_SSP=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 4bc3807..c367ae4 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,11 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Thu Dec 4 15:27:39 2008
+# Linux kernel version: 2.6.29-rc5
+# Tue Mar 3 21:45:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
@@ -42,10 +42,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
+CONFIG_LOG_BUF_SHIFT=19
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
@@ -53,6 +62,7 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -83,6 +93,7 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
@@ -93,7 +104,6 @@
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,11 +111,9 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -121,7 +129,6 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
@@ -132,7 +139,6 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -159,11 +165,13 @@
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell Kirkwood Implementations
@@ -171,14 +179,8 @@
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_TS219=y
CONFIG_PLAT_ORION=y
#
@@ -214,6 +216,7 @@
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
#
@@ -242,7 +245,6 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
@@ -291,6 +293,7 @@
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -355,6 +358,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -368,12 +372,27 @@
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -398,6 +417,7 @@
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -451,9 +471,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -481,6 +499,7 @@
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -491,6 +510,12 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -568,6 +593,8 @@
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -682,6 +709,9 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -695,6 +725,7 @@
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -710,7 +741,6 @@
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -720,6 +750,7 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
@@ -754,8 +785,39 @@
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -791,13 +853,20 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -807,7 +876,11 @@
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
@@ -839,11 +912,11 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -879,6 +952,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -905,8 +979,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
@@ -925,12 +997,12 @@
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_ORION=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
@@ -952,10 +1024,12 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1012,11 +1086,9 @@
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
@@ -1024,12 +1096,15 @@
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
@@ -1058,6 +1133,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
@@ -1087,7 +1163,6 @@
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1135,21 +1210,51 @@
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
+CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1178,7 +1283,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1227,6 +1332,7 @@
# CONFIG_DMATEST is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1238,16 +1344,14 @@
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1268,9 +1372,9 @@
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
@@ -1286,10 +1390,7 @@
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1309,6 +1410,7 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1393,7 +1495,7 @@
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -1416,6 +1518,7 @@
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
@@ -1424,7 +1527,7 @@
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1435,7 +1538,10 @@
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
#
# Tracers
@@ -1446,11 +1552,14 @@
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1464,19 +1573,22 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1496,7 +1608,7 @@
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
@@ -1510,7 +1622,7 @@
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1527,9 +1639,9 @@
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
@@ -1560,6 +1672,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index a1cc34f..56ae568 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -87,7 +87,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 73ba62b..82428c2 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Sun Dec 30 13:02:54 2007
+# Linux kernel version: 2.6.29-rc3
+# Fri Jan 30 12:42:03 2009
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
@@ -12,6 +13,7 @@
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +23,8 @@
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -41,16 +43,24 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -65,31 +75,41 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -103,8 +123,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_FREEZER=y
#
# System Type
@@ -114,9 +133,7 @@
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@@ -130,41 +147,58 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
CONFIG_MACH_MAGICIAN=y
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
#
# Processor Type
@@ -173,6 +207,7 @@
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@@ -186,6 +221,7 @@
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -197,28 +233,33 @@
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -229,9 +270,10 @@
CONFIG_CMDLINE="keepinitrd"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
#
-# CPU Frequency scaling
+# CPU Power Management
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
@@ -239,6 +281,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -247,6 +290,7 @@
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -263,6 +307,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -270,21 +316,18 @@
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_APM_EMULATION=y
-
-#
-# Networking
-#
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -316,33 +359,15 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -353,6 +378,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -390,20 +416,17 @@
# Dongle support
#
# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -417,17 +440,17 @@
#
# Bluetooth device drivers
#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -442,25 +465,28 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
@@ -473,6 +499,7 @@
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -487,6 +514,7 @@
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
@@ -497,9 +525,7 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PXA2XX is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_SHARP_SL is not set
@@ -523,6 +549,12 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -531,10 +563,12 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -547,7 +581,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -563,6 +596,20 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -612,7 +659,26 @@
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
@@ -625,9 +691,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -642,6 +710,7 @@
# CONFIG_SERIAL_PXA_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
@@ -649,37 +718,45 @@
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
+CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
-CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
@@ -688,19 +765,39 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
CONFIG_W1=y
#
# 1-wire Bus Masters
#
+# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
+# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
@@ -709,32 +806,56 @@
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
+# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
CONFIG_BATTERY_DS2760=y
+# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -745,6 +866,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -752,8 +874,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -765,13 +887,21 @@
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
#
# Display device support
@@ -802,15 +932,8 @@
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -824,53 +947,185 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=m
+# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_HID=m
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -899,6 +1154,9 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -908,17 +1166,26 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -927,19 +1194,18 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -965,15 +1231,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -997,9 +1261,13 @@
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1007,14 +1275,13 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1076,6 +1343,7 @@
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1083,15 +1351,18 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
@@ -1100,17 +1371,41 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -1119,55 +1414,110 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 83c817f..b069872 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -165,6 +165,7 @@
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
+CONFIG_MACH_RD78X00_MASA=y
#
# Boot options
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index d81ea21..36cd62e 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -91,7 +91,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
new file mode 100644
index 0000000..8fb918d
--- /dev/null
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -0,0 +1,2061 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 14:17:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+CONFIG_SMC911X=m
+CONFIG_SMSC911X=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_USB_ZD1201=m
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+# CONFIG_DVB_TUNER_CX24113 is not set
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+CONFIG_SND_OMAP_SOC_SDP3430=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index a8ee698..020e6a8 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -481,7 +481,7 @@
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
@@ -1177,7 +1177,7 @@
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index a6b47ea..f2d2dda 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -88,7 +88,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
new file mode 100644
index 0000000..db5faea
--- /dev/null
+++ b/arch/arm/configs/pxa168_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:43:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910 Implmentations
+#
+CONFIG_MACH_ASPENITE=y
+CONFIG_MACH_ZYLONITE2=y
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_CPU_PXA168=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
new file mode 100644
index 0000000..8c7e299
--- /dev/null
+++ b/arch/arm/configs/pxa910_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Fri Mar 20 13:45:12 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_MACH_TAVOREVB=y
+
+#
+# Marvell PXA168/910 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+CONFIG_MACH_TTC_DKB=y
+CONFIG_CPU_PXA910=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_MOHAWK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
new file mode 100644
index 0000000..593102da
--- /dev/null
+++ b/arch/arm/configs/rx51_defconfig
@@ -0,0 +1,1821 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 15:28:56 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+CONFIG_MACH_NOKIA_RX51=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index d052c8f..984f7096 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -87,7 +87,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 9b6561d..90235bf 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,88 +1,174 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-git3
-# Sat Jul 16 15:21:47 2005
+# Linux kernel version: 2.6.28-git6
+# Thu Jan 8 17:14:47 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_FREEZER is not set
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_SHARK=y
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Processor Type
@@ -91,14 +177,20 @@
CONFIG_CPU_SA110=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
@@ -107,22 +199,40 @@
CONFIG_ISA_DMA=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
CONFIG_PCI_HOST_VIA82C505=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_SMP is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
@@ -135,6 +245,12 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -143,13 +259,16 @@
#
# At least one emulation must be selected
#
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FPE_FASTFPE=y
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -158,6 +277,75 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -166,36 +354,27 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
@@ -210,52 +389,78 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_IDE_ARM=y
-# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -275,17 +480,20 @@
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
@@ -296,12 +504,18 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
@@ -314,20 +528,15 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
@@ -336,123 +545,57 @@
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -462,56 +605,69 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
+CONFIG_CS89x0_NOEEPROM=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -519,18 +675,17 @@
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -540,7 +695,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -553,14 +707,25 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -580,16 +745,22 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -599,90 +770,122 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
-CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Misc devices
+# Sonics Silicon Backplane
#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -691,126 +894,132 @@
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-CONFIG_SOUND_ADLIB=m
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_KAHLUA is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
+# Special HID drivers
#
+CONFIG_HID_COMPAT=y
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
-# USB Gadget Support
+# Enable Host or Gadget support to see Inventra options
#
-# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
+# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -834,14 +1043,12 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -855,22 +1062,27 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
+CONFIG_NFSD=m
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -897,11 +1109,9 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -942,30 +1152,74 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
@@ -973,19 +1227,23 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 03f783e..685d2b5 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -89,7 +89,6 @@
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 6cbd8fd..bfb0cb9 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -94,6 +94,14 @@
# endif
#endif
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE mohawk
+# endif
+#endif
+
#if defined(CONFIG_CPU_FEROCEON)
# define MULTI_CACHE 1
#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 22cb14e..ff46dfa 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,10 +15,20 @@
* must not be used by drivers.
*/
#ifndef __arch_page_to_dma
+
+#if !defined(CONFIG_HIGHMEM)
static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
{
return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
}
+#elif defined(__pfn_to_bus)
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+ return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+}
+#else
+#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
+#endif
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
@@ -57,6 +67,8 @@
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+extern void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, int rw);
/*
* Return whether the given device DMA address mask can be supported
@@ -316,7 +328,7 @@
BUG_ON(!valid_dma_direction(dir));
if (!arch_is_coherent())
- dma_cache_maint(page_address(page) + offset, size, dir);
+ dma_cache_maint_page(page, offset, size, dir);
return page_to_dma(dev, page) + offset;
}
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index df5638f..7edf353 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -19,21 +19,17 @@
#include <asm/system.h>
#include <asm/scatterlist.h>
-typedef unsigned int dmach_t;
-
#include <mach/isa-dma.h>
/*
- * DMA modes
+ * The DMA modes reflect the settings for the ISA DMA controller
*/
-typedef unsigned int dmamode_t;
+#define DMA_MODE_MASK 0xcc
-#define DMA_MODE_MASK 3
-
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_CASCADE 2
-#define DMA_AUTOINIT 4
+#define DMA_MODE_READ 0x44
+#define DMA_MODE_WRITE 0x48
+#define DMA_MODE_CASCADE 0xc0
+#define DMA_AUTOINIT 0x10
extern spinlock_t dma_spin_lock;
@@ -52,44 +48,44 @@
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
*/
-#define clear_dma_ff(channel)
+#define clear_dma_ff(chan)
/* Set only the page register bits of the transfer address.
*
* NOTE: This is an architecture specific function, and should
* be hidden from the drivers
*/
-extern void set_dma_page(dmach_t channel, char pagenr);
+extern void set_dma_page(unsigned int chan, char pagenr);
/* Request a DMA channel
*
* Some architectures may need to do allocate an interrupt
*/
-extern int request_dma(dmach_t channel, const char * device_id);
+extern int request_dma(unsigned int chan, const char * device_id);
/* Free a DMA channel
*
* Some architectures may need to do free an interrupt
*/
-extern void free_dma(dmach_t channel);
+extern void free_dma(unsigned int chan);
/* Enable DMA for this channel
*
* On some architectures, this may have other side effects like
* enabling an interrupt and setting the DMA registers.
*/
-extern void enable_dma(dmach_t channel);
+extern void enable_dma(unsigned int chan);
/* Disable DMA for this channel
*
* On some architectures, this may have other side effects like
* disabling an interrupt or whatever.
*/
-extern void disable_dma(dmach_t channel);
+extern void disable_dma(unsigned int chan);
/* Test whether the specified channel has an active DMA transfer
*/
-extern int dma_channel_active(dmach_t channel);
+extern int dma_channel_active(unsigned int chan);
/* Set the DMA scatter gather list for this channel
*
@@ -97,7 +93,7 @@
* especially since some DMA architectures don't update the
* DMA address immediately, but defer it to the enable_dma().
*/
-extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
/* Set the DMA address for this channel
*
@@ -105,9 +101,9 @@
* especially since some DMA architectures don't update the
* DMA address immediately, but defer it to the enable_dma().
*/
-extern void __set_dma_addr(dmach_t channel, void *addr);
-#define set_dma_addr(channel, addr) \
- __set_dma_addr(channel, bus_to_virt(addr))
+extern void __set_dma_addr(unsigned int chan, void *addr);
+#define set_dma_addr(chan, addr) \
+ __set_dma_addr(chan, bus_to_virt(addr))
/* Set the DMA byte count for this channel
*
@@ -115,7 +111,7 @@
* especially since some DMA architectures don't update the
* DMA count immediately, but defer it to the enable_dma().
*/
-extern void set_dma_count(dmach_t channel, unsigned long count);
+extern void set_dma_count(unsigned int chan, unsigned long count);
/* Set the transfer direction for this channel
*
@@ -124,11 +120,11 @@
* DMA transfer direction immediately, but defer it to the
* enable_dma().
*/
-extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+extern void set_dma_mode(unsigned int chan, unsigned int mode);
/* Set the transfer speed for this channel
*/
-extern void set_dma_speed(dmach_t channel, int cycle_ns);
+extern void set_dma_speed(unsigned int chan, int cycle_ns);
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
@@ -136,7 +132,7 @@
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*/
-extern int get_dma_residue(dmach_t channel);
+extern int get_dma_residue(unsigned int chan);
#ifndef NO_DMA
#define NO_DMA 255
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a58378c..def8eac 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -50,6 +50,7 @@
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
+#define R_ARM_PREL31 42
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h
new file mode 100644
index 0000000..bbae919
--- /dev/null
+++ b/arch/arm/include/asm/fixmap.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+/*
+ * Nothing too fancy for now.
+ *
+ * On ARM we already have well known fixed virtual addresses imposed by
+ * the architecture such as the vector page which is located at 0xffff0000,
+ * therefore a second level page table is already allocated covering
+ * 0xfff00000 upwards.
+ *
+ * The cache flushing code in proc-xscale.S uses the virtual area between
+ * 0xfffe0000 and 0xfffeffff.
+ */
+
+#define FIXADDR_START 0xfff00000UL
+#define FIXADDR_TOP 0xfffe0000UL
+#define FIXADDR_SIZE (FIXADDR_TOP - FIXADDR_START)
+
+#define FIX_KMAP_BEGIN 0
+#define FIX_KMAP_END (FIXADDR_SIZE >> PAGE_SHIFT)
+
+#define __fix_to_virt(x) (FIXADDR_START + ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) (((x) - FIXADDR_START) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ if (idx >= FIX_KMAP_END)
+ __this_fixmap_does_not_exist();
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned int virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index dfb8330..46492a63 100644
--- a/arch/arm/include/asm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -63,7 +63,5 @@
extern struct scoop_pcmcia_config *platform_scoop_config;
void reset_scoop(struct device *dev);
-unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
-unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
new file mode 100644
index 0000000..7f36d00
--- /dev/null
+++ b/arch/arm/include/asm/highmem.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#include <asm/kmap_types.h>
+
+#define PKMAP_BASE (PAGE_OFFSET - PMD_SIZE)
+#define LAST_PKMAP PTRS_PER_PTE
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define kmap_prot PAGE_KERNEL
+
+#define flush_cache_kmaps() flush_cache_all()
+
+extern pte_t *pkmap_page_table;
+
+#define ARCH_NEEDS_KMAP_HIGH_GET
+
+extern void *kmap_high(struct page *page);
+extern void *kmap_high_get(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *kmap_atomic_to_page(const void *ptr);
+
+#endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index bda489f..f7bd52b 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -17,6 +17,8 @@
#define HWCAP_CRUNCH 1024
#define HWCAP_THUMBEE 2048
#define HWCAP_NEON 4096
+#define HWCAP_VFPv3 8192
+#define HWCAP_VFPv3D16 16384
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
/*
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index 45def13..d16ec97 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -18,6 +18,7 @@
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
+ KM_L2_CACHE,
KM_TYPE_NR
};
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index fc7278e..9e614a1 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -15,13 +15,13 @@
typedef struct dma_struct dma_t;
struct dma_ops {
- int (*request)(dmach_t, dma_t *); /* optional */
- void (*free)(dmach_t, dma_t *); /* optional */
- void (*enable)(dmach_t, dma_t *); /* mandatory */
- void (*disable)(dmach_t, dma_t *); /* mandatory */
- int (*residue)(dmach_t, dma_t *); /* optional */
- int (*setspeed)(dmach_t, dma_t *, int); /* optional */
- char *type;
+ int (*request)(unsigned int, dma_t *); /* optional */
+ void (*free)(unsigned int, dma_t *); /* optional */
+ void (*enable)(unsigned int, dma_t *); /* mandatory */
+ void (*disable)(unsigned int, dma_t *); /* mandatory */
+ int (*residue)(unsigned int, dma_t *); /* optional */
+ int (*setspeed)(unsigned int, dma_t *, int); /* optional */
+ const char *type;
};
struct dma_struct {
@@ -34,24 +34,21 @@
unsigned int active:1; /* Transfer active */
unsigned int invalid:1; /* Address/Count changed */
- dmamode_t dma_mode; /* DMA mode */
+ unsigned int dma_mode; /* DMA mode */
int speed; /* DMA speed */
unsigned int lock; /* Device is allocated */
const char *device_id; /* Device name */
- unsigned int dma_base; /* Controller base address */
- int dma_irq; /* Controller IRQ */
- struct scatterlist cur_sg; /* Current controller buffer */
- unsigned int state;
-
- struct dma_ops *d_ops;
+ const struct dma_ops *d_ops;
};
-/* Prototype: void arch_dma_init(dma)
- * Purpose : Initialise architecture specific DMA
- * Params : dma - pointer to array of DMA structures
+/*
+ * isa_dma_add - add an ISA-style DMA channel
*/
-extern void arch_dma_init(dma_t *dma);
+extern int isa_dma_add(unsigned int, dma_t *dma);
-extern void isa_init_dma(dma_t *dma);
+/*
+ * Add the ISA DMA controller. Always takes channels 0-7.
+ */
+extern void isa_init_dma(void);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 39d949b..58cf91f 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -26,6 +26,7 @@
#define MT_HIGH_VECTORS 8
#define MT_MEMORY 9
#define MT_ROM 10
+#define MT_MEMORY_NONCACHED 11
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 0202a7c..85763db 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,14 +44,21 @@
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
*/
-#define MODULES_END (PAGE_OFFSET)
-#define MODULES_VADDR (MODULES_END - 16*1048576)
-
+#define MODULES_VADDR (PAGE_OFFSET - 16*1024*1024)
#if TASK_SIZE > MODULES_VADDR
#error Top of user space clashes with start of module space
#endif
/*
+ * The highmem pkmap virtual space shares the end of the module area.
+ */
+#ifdef CONFIG_HIGHMEM
+#define MODULES_END (PAGE_OFFSET - PMD_SIZE)
+#else
+#define MODULES_END (PAGE_OFFSET)
+#endif
+
+/*
* The XIP kernel gets mapped at the bottom of the module vm area.
* Since we use sections to map it, this macro replaces the physical address
* with its virtual address while keeping offset from the base section.
@@ -181,6 +188,7 @@
#ifndef __virt_to_bus
#define __virt_to_bus __virt_to_phys
#define __bus_to_virt __phys_to_virt
+#define __pfn_to_bus(x) ((x) << PAGE_SHIFT)
#endif
static inline __deprecated unsigned long virt_to_bus(void *x)
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 24b168d..e4dfa69 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -1,15 +1,27 @@
#ifndef _ASM_ARM_MODULE_H
#define _ASM_ARM_MODULE_H
-struct mod_arch_specific
-{
- int foo;
-};
-
#define Elf_Shdr Elf32_Shdr
#define Elf_Sym Elf32_Sym
#define Elf_Ehdr Elf32_Ehdr
+struct unwind_table;
+
+struct mod_arch_specific
+{
+#ifdef CONFIG_ARM_UNWIND
+ Elf_Shdr *unw_sec_init;
+ Elf_Shdr *unw_sec_devinit;
+ Elf_Shdr *unw_sec_core;
+ Elf_Shdr *sec_init_text;
+ Elf_Shdr *sec_devinit_text;
+ Elf_Shdr *sec_core_text;
+ struct unwind_table *unwind_init;
+ struct unwind_table *unwind_devinit;
+ struct unwind_table *unwind_core;
+#endif
+};
+
/*
* Include the ARM architecture version.
*/
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index db80203..c625031 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -185,6 +185,14 @@
# define CPU_NAME cpu_xsc3
# endif
# endif
+# ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_mohawk
+# endif
+# endif
# ifdef CONFIG_CPU_FEROCEON
# ifdef CPU_NAME
# undef MULTI_CPU
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 7319261..236a06b 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -27,6 +27,8 @@
/* PTRACE_SYSCALL is 24 */
#define PTRACE_GETCRUNCHREGS 25
#define PTRACE_SETCRUNCHREGS 26
+#define PTRACE_GETVFPREGS 27
+#define PTRACE_SETVFPREGS 28
/*
* PSR bits
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index 503843d..c10d1aa 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -43,6 +43,7 @@
#define SZ_8M 0x00800000
#define SZ_16M 0x01000000
#define SZ_32M 0x02000000
+#define SZ_48M 0x03000000
#define SZ_64M 0x04000000
#define SZ_128M 0x08000000
#define SZ_256M 0x10000000
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
new file mode 100644
index 0000000..4d0a164
--- /dev/null
+++ b/arch/arm/include/asm/stacktrace.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+struct stackframe {
+ unsigned long fp;
+ unsigned long sp;
+ unsigned long lr;
+ unsigned long pc;
+};
+
+extern int unwind_frame(struct stackframe *frame);
+extern void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data);
+
+#endif /* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 811be55..0a0d49a 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -97,8 +97,8 @@
extern int cpu_architecture(void);
extern void cpu_init(void);
-void arm_machine_restart(char mode);
-extern void (*arm_pm_restart)(char str);
+void arm_machine_restart(char mode, const char *cmd);
+extern void (*arm_pm_restart)(char str, const char *cmd);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 68b9ec8..4f88482 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -99,6 +99,8 @@
#define thread_saved_pc(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk) \
+ ((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
@@ -113,6 +115,8 @@
extern void iwmmxt_task_release(struct thread_info *);
extern void iwmmxt_task_switch(struct thread_info *);
+extern void vfp_sync_state(struct thread_info *thread);
+
#endif
/*
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index aa399ae..491960b 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -25,5 +25,6 @@
}
extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
#endif
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
new file mode 100644
index 0000000..a5edf42
--- /dev/null
+++ b/arch/arm/include/asm/unwind.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/include/asm/unwind.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNWIND_H
+#define __ASM_UNWIND_H
+
+#ifndef __ASSEMBLY__
+
+/* Unwind reason code according the the ARM EABI documents */
+enum unwind_reason_code {
+ URC_OK = 0, /* operation completed successfully */
+ URC_CONTINUE_UNWIND = 8,
+ URC_FAILURE = 9 /* unspecified failure of some kind */
+};
+
+struct unwind_idx {
+ unsigned long addr;
+ unsigned long insn;
+};
+
+struct unwind_table {
+ struct list_head list;
+ struct unwind_idx *start;
+ struct unwind_idx *stop;
+ unsigned long begin_addr;
+ unsigned long end_addr;
+};
+
+extern struct unwind_table *unwind_table_add(unsigned long start,
+ unsigned long size,
+ unsigned long text_addr,
+ unsigned long text_size);
+extern void unwind_table_del(struct unwind_table *tab);
+extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
+
+#ifdef CONFIG_ARM_UNWIND
+extern int __init unwind_init(void);
+#else
+static inline int __init unwind_init(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARM_UNWIND
+#define UNWIND(code...) code
+#else
+#define UNWIND(code...)
+#endif
+
+#endif /* __ASM_UNWIND_H */
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index 825c1e7..df95e05 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -81,4 +81,13 @@
#define HOST_TEXT_START_ADDR (u.start_code)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+/*
+ * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
+ * are ignored by the ptrace system call.
+ */
+struct user_vfp {
+ unsigned long long fpregs[32];
+ unsigned long fpscr;
+};
+
#endif /* _ARM_USER_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 4305345..11a5197 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,12 +29,14 @@
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
+obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
obj-$(CONFIG_CPU_XSCALE) += xscale-cp0.o
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
+obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index f53c582..b121b60 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,33 @@
1002:
.endm
+#elif defined(CONFIG_CPU_XSCALE)
+
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c8, c0, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x10000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c14, c0, 0
+ tst \rx, #0x10000000
+ bne 1001b
+1002:
+ .endm
+
#else
.macro addruart, rx
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 4a3a504..0e88e46 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -24,11 +24,6 @@
#include <asm/dma.h>
#include <asm/mach/dma.h>
-#define ISA_DMA_MODE_READ 0x44
-#define ISA_DMA_MODE_WRITE 0x48
-#define ISA_DMA_MODE_CASCADE 0xc0
-#define ISA_DMA_AUTOINIT 0x10
-
#define ISA_DMA_MASK 0
#define ISA_DMA_MODE 1
#define ISA_DMA_CLRFF 2
@@ -49,38 +44,35 @@
{ 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce }
};
-static int isa_get_dma_residue(dmach_t channel, dma_t *dma)
+static int isa_get_dma_residue(unsigned int chan, dma_t *dma)
{
- unsigned int io_port = isa_dma_port[channel][ISA_DMA_COUNT];
+ unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT];
int count;
count = 1 + inb(io_port);
count |= inb(io_port) << 8;
- return channel < 4 ? count : (count << 1);
+ return chan < 4 ? count : (count << 1);
}
-static void isa_enable_dma(dmach_t channel, dma_t *dma)
+static void isa_enable_dma(unsigned int chan, dma_t *dma)
{
if (dma->invalid) {
unsigned long address, length;
unsigned int mode;
enum dma_data_direction direction;
- mode = channel & 3;
+ mode = (chan & 3) | dma->dma_mode;
switch (dma->dma_mode & DMA_MODE_MASK) {
case DMA_MODE_READ:
- mode |= ISA_DMA_MODE_READ;
direction = DMA_FROM_DEVICE;
break;
case DMA_MODE_WRITE:
- mode |= ISA_DMA_MODE_WRITE;
direction = DMA_TO_DEVICE;
break;
case DMA_MODE_CASCADE:
- mode |= ISA_DMA_MODE_CASCADE;
direction = DMA_BIDIRECTIONAL;
break;
@@ -105,34 +97,31 @@
address = dma->buf.dma_address;
length = dma->buf.length - 1;
- outb(address >> 16, isa_dma_port[channel][ISA_DMA_PGLO]);
- outb(address >> 24, isa_dma_port[channel][ISA_DMA_PGHI]);
+ outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]);
+ outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]);
- if (channel >= 4) {
+ if (chan >= 4) {
address >>= 1;
length >>= 1;
}
- outb(0, isa_dma_port[channel][ISA_DMA_CLRFF]);
+ outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]);
- outb(address, isa_dma_port[channel][ISA_DMA_ADDR]);
- outb(address >> 8, isa_dma_port[channel][ISA_DMA_ADDR]);
+ outb(address, isa_dma_port[chan][ISA_DMA_ADDR]);
+ outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]);
- outb(length, isa_dma_port[channel][ISA_DMA_COUNT]);
- outb(length >> 8, isa_dma_port[channel][ISA_DMA_COUNT]);
+ outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
+ outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
- if (dma->dma_mode & DMA_AUTOINIT)
- mode |= ISA_DMA_AUTOINIT;
-
- outb(mode, isa_dma_port[channel][ISA_DMA_MODE]);
+ outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
dma->invalid = 0;
}
- outb(channel & 3, isa_dma_port[channel][ISA_DMA_MASK]);
+ outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]);
}
-static void isa_disable_dma(dmach_t channel, dma_t *dma)
+static void isa_disable_dma(unsigned int chan, dma_t *dma)
{
- outb(channel | 4, isa_dma_port[channel][ISA_DMA_MASK]);
+ outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]);
}
static struct dma_ops isa_dma_ops = {
@@ -160,7 +149,12 @@
.end = 0x048f
} };
-void __init isa_init_dma(dma_t *dma)
+static dma_t isa_dma[8];
+
+/*
+ * ISA DMA always starts at channel 0
+ */
+void __init isa_init_dma(void)
{
/*
* Try to autodetect presence of an ISA DMA controller.
@@ -178,11 +172,11 @@
outb(0xaa, 0x00);
if (inb(0) == 0x55 && inb(0) == 0xaa) {
- int channel, i;
+ unsigned int chan, i;
- for (channel = 0; channel < 8; channel++) {
- dma[channel].d_ops = &isa_dma_ops;
- isa_disable_dma(channel, NULL);
+ for (chan = 0; chan < 8; chan++) {
+ isa_dma[chan].d_ops = &isa_dma_ops;
+ isa_disable_dma(chan, NULL);
}
outb(0x40, 0x0b);
@@ -217,5 +211,12 @@
for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
request_resource(&ioport_resource, dma_resources + i);
+
+ for (chan = 0; chan < 8; chan++) {
+ int ret = isa_dma_add(chan, &isa_dma[chan]);
+ if (ret)
+ printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
+ chan, ret);
+ }
}
}
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index d006085..7d5b9fb 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
+#include <linux/scatterlist.h>
#include <asm/dma.h>
@@ -23,19 +24,40 @@
DEFINE_SPINLOCK(dma_spin_lock);
EXPORT_SYMBOL(dma_spin_lock);
-static dma_t dma_chan[MAX_DMA_CHANNELS];
+static dma_t *dma_chan[MAX_DMA_CHANNELS];
+
+static inline dma_t *dma_channel(unsigned int chan)
+{
+ if (chan >= MAX_DMA_CHANNELS)
+ return NULL;
+
+ return dma_chan[chan];
+}
+
+int __init isa_dma_add(unsigned int chan, dma_t *dma)
+{
+ if (!dma->d_ops)
+ return -EINVAL;
+
+ sg_init_table(&dma->buf, 1);
+
+ if (dma_chan[chan])
+ return -EBUSY;
+ dma_chan[chan] = dma;
+ return 0;
+}
/*
* Request DMA channel
*
* On certain platforms, we have to allocate an interrupt as well...
*/
-int request_dma(dmach_t channel, const char *device_id)
+int request_dma(unsigned int chan, const char *device_id)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret;
- if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+ if (!dma)
goto bad_dma;
if (xchg(&dma->lock, 1) != 0)
@@ -47,7 +69,7 @@
ret = 0;
if (dma->d_ops->request)
- ret = dma->d_ops->request(channel, dma);
+ ret = dma->d_ops->request(chan, dma);
if (ret)
xchg(&dma->lock, 0);
@@ -55,7 +77,7 @@
return ret;
bad_dma:
- printk(KERN_ERR "dma: trying to allocate DMA%d\n", channel);
+ printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan);
return -EINVAL;
busy:
@@ -68,42 +90,42 @@
*
* On certain platforms, we have to free interrupt as well...
*/
-void free_dma(dmach_t channel)
+void free_dma(unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
- if (channel >= MAX_DMA_CHANNELS || !dma->d_ops)
+ if (!dma)
goto bad_dma;
if (dma->active) {
- printk(KERN_ERR "dma%d: freeing active DMA\n", channel);
- dma->d_ops->disable(channel, dma);
+ printk(KERN_ERR "dma%d: freeing active DMA\n", chan);
+ dma->d_ops->disable(chan, dma);
dma->active = 0;
}
if (xchg(&dma->lock, 0) != 0) {
if (dma->d_ops->free)
- dma->d_ops->free(channel, dma);
+ dma->d_ops->free(chan, dma);
return;
}
- printk(KERN_ERR "dma%d: trying to free free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to free free DMA\n", chan);
return;
bad_dma:
- printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
+ printk(KERN_ERR "dma: trying to free DMA%d\n", chan);
}
EXPORT_SYMBOL(free_dma);
/* Set DMA Scatter-Gather list
*/
-void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
+void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA SG while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = sg;
dma->sgcount = nr_sg;
@@ -115,13 +137,13 @@
*
* Copy address to the structure, and set the invalid bit
*/
-void __set_dma_addr (dmach_t channel, void *addr)
+void __set_dma_addr (unsigned int chan, void *addr)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA address while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = NULL;
dma->addr = addr;
@@ -133,13 +155,13 @@
*
* Copy address to the structure, and set the invalid bit
*/
-void set_dma_count (dmach_t channel, unsigned long count)
+void set_dma_count (unsigned int chan, unsigned long count)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA count while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->sg = NULL;
dma->count = count;
@@ -149,13 +171,13 @@
/* Set DMA direction mode
*/
-void set_dma_mode (dmach_t channel, dmamode_t mode)
+void set_dma_mode (unsigned int chan, unsigned int mode)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (dma->active)
printk(KERN_ERR "dma%d: altering DMA mode while "
- "DMA active\n", channel);
+ "DMA active\n", chan);
dma->dma_mode = mode;
dma->invalid = 1;
@@ -164,42 +186,42 @@
/* Enable DMA channel
*/
-void enable_dma (dmach_t channel)
+void enable_dma (unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (!dma->lock)
goto free_dma;
if (dma->active == 0) {
dma->active = 1;
- dma->d_ops->enable(channel, dma);
+ dma->d_ops->enable(chan, dma);
}
return;
free_dma:
- printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan);
BUG();
}
EXPORT_SYMBOL(enable_dma);
/* Disable DMA channel
*/
-void disable_dma (dmach_t channel)
+void disable_dma (unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
if (!dma->lock)
goto free_dma;
if (dma->active == 1) {
dma->active = 0;
- dma->d_ops->disable(channel, dma);
+ dma->d_ops->disable(chan, dma);
}
return;
free_dma:
- printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
+ printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan);
BUG();
}
EXPORT_SYMBOL(disable_dma);
@@ -207,45 +229,38 @@
/*
* Is the specified DMA channel active?
*/
-int dma_channel_active(dmach_t channel)
+int dma_channel_active(unsigned int chan)
{
- return dma_chan[channel].active;
+ dma_t *dma = dma_channel(chan);
+ return dma->active;
}
EXPORT_SYMBOL(dma_channel_active);
-void set_dma_page(dmach_t channel, char pagenr)
+void set_dma_page(unsigned int chan, char pagenr)
{
- printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
+ printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan);
}
EXPORT_SYMBOL(set_dma_page);
-void set_dma_speed(dmach_t channel, int cycle_ns)
+void set_dma_speed(unsigned int chan, int cycle_ns)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret = 0;
if (dma->d_ops->setspeed)
- ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
+ ret = dma->d_ops->setspeed(chan, dma, cycle_ns);
dma->speed = ret;
}
EXPORT_SYMBOL(set_dma_speed);
-int get_dma_residue(dmach_t channel)
+int get_dma_residue(unsigned int chan)
{
- dma_t *dma = dma_chan + channel;
+ dma_t *dma = dma_channel(chan);
int ret = 0;
if (dma->d_ops->residue)
- ret = dma->d_ops->residue(channel, dma);
+ ret = dma->d_ops->residue(chan, dma);
return ret;
}
EXPORT_SYMBOL(get_dma_residue);
-
-static int __init init_dma(void)
-{
- arch_dma_init(dma_chan);
- return 0;
-}
-
-core_initcall(init_dma);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 85040cf..d662a2f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -20,6 +20,7 @@
#include <asm/vfpmacros.h>
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
+#include <asm/unwind.h>
#include "entry-header.S"
@@ -123,6 +124,8 @@
#endif
.macro svc_entry, stack_hole=0
+ UNWIND(.fnstart )
+ UNWIND(.save {r0 - pc} )
sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( tst sp, #4 )
SPFIX( bicne sp, sp, #4 )
@@ -196,6 +199,7 @@
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__dabt_svc)
.align 5
@@ -228,6 +232,7 @@
bleq trace_hardirqs_on
#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__irq_svc)
.ltorg
@@ -278,6 +283,7 @@
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
+ UNWIND(.fnend )
ENDPROC(__und_svc)
.align 5
@@ -320,6 +326,7 @@
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+ UNWIND(.fnend )
ENDPROC(__pabt_svc)
.align 5
@@ -343,6 +350,8 @@
#endif
.macro usr_entry
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind ) @ don't unwind the user space
sub sp, sp, #S_FRAME_SIZE
stmib sp, {r1 - r12}
@@ -420,6 +429,7 @@
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
+ UNWIND(.fnend )
ENDPROC(__dabt_usr)
.align 5
@@ -450,6 +460,7 @@
mov why, #0
b ret_to_user
+ UNWIND(.fnend )
ENDPROC(__irq_usr)
.ltorg
@@ -484,6 +495,7 @@
#else
b __und_usr_unknown
#endif
+ UNWIND(.fnend )
ENDPROC(__und_usr)
@
@@ -671,14 +683,18 @@
enable_irq @ Enable interrupts
mov r1, sp @ regs
bl do_PrefetchAbort @ call abort handler
+ UNWIND(.fnend )
/* fall through */
/*
* This is the return code to user mode for abort handlers
*/
ENTRY(ret_from_exception)
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
get_thread_info tsk
mov why, #0
b ret_to_user
+ UNWIND(.fnend )
ENDPROC(__pabt_usr)
ENDPROC(ret_from_exception)
@@ -688,6 +704,8 @@
* previous and next are guaranteed not to be the same.
*/
ENTRY(__switch_to)
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
stmia ip!, {r4 - sl, fp, sp, lr} @ Store most regs on stack
@@ -717,6 +735,7 @@
bl atomic_notifier_call_chain
mov r0, r5
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
+ UNWIND(.fnend )
ENDPROC(__switch_to)
__INIT
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 49a6ba9..b55cb03 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -11,6 +11,7 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
+#include <asm/unwind.h>
#include "entry-header.S"
@@ -22,6 +23,8 @@
* stack.
*/
ret_fast_syscall:
+ UNWIND(.fnstart )
+ UNWIND(.cantunwind )
disable_irq @ disable interrupts
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
@@ -38,6 +41,7 @@
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
+ UNWIND(.fnend )
/*
* Ok, we need to do extra processing, enter the slow path.
@@ -111,6 +115,7 @@
.globl mcount_call
mcount_call:
bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ENTRY(ftrace_caller)
@@ -122,6 +127,7 @@
.globl ftrace_call
ftrace_call:
bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#else
@@ -133,6 +139,7 @@
adr r0, ftrace_stub
cmp r0, r2
bne trace
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
trace:
@@ -141,6 +148,7 @@
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
+ mov lr, r1 @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 36f81d9..6ff7919 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -88,7 +88,7 @@
* disable irqs for the duration. Note - these functions are almost
* entirely coded in assembly.
*/
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
{
register unsigned long tmp;
asm volatile (
@@ -106,7 +106,7 @@
: "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
}
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
{
register unsigned long tmp;
asm volatile (
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index dab48f2..13dbd5b 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -22,6 +22,7 @@
#include <asm/pgtable.h>
#include <asm/sections.h>
+#include <asm/unwind.h>
#ifdef CONFIG_XIP_KERNEL
/*
@@ -66,6 +67,24 @@
char *secstrings,
struct module *mod)
{
+#ifdef CONFIG_ARM_UNWIND
+ Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+
+ for (s = sechdrs; s < sechdrs_end; s++) {
+ if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_init = s;
+ else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_devinit = s;
+ else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
+ mod->arch.unw_sec_core = s;
+ else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_init_text = s;
+ else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_devinit_text = s;
+ else if (strcmp(".text", secstrings + s->sh_name) == 0)
+ mod->arch.sec_core_text = s;
+ }
+#endif
return 0;
}
@@ -104,6 +123,10 @@
loc = dstsec->sh_addr + rel->r_offset;
switch (ELF32_R_TYPE(rel->r_info)) {
+ case R_ARM_NONE:
+ /* ignore */
+ break;
+
case R_ARM_ABS32:
*(u32 *)loc += sym->st_value;
break;
@@ -132,6 +155,11 @@
*(u32 *)loc |= offset & 0x00ffffff;
break;
+ case R_ARM_PREL31:
+ offset = *(u32 *)loc + sym->st_value - loc;
+ *(u32 *)loc = offset & 0x7fffffff;
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
@@ -150,14 +178,50 @@
return -ENOEXEC;
}
+#ifdef CONFIG_ARM_UNWIND
+static void register_unwind_tables(struct module *mod)
+{
+ if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
+ mod->arch.unwind_init =
+ unwind_table_add(mod->arch.unw_sec_init->sh_addr,
+ mod->arch.unw_sec_init->sh_size,
+ mod->arch.sec_init_text->sh_addr,
+ mod->arch.sec_init_text->sh_size);
+ if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
+ mod->arch.unwind_devinit =
+ unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
+ mod->arch.unw_sec_devinit->sh_size,
+ mod->arch.sec_devinit_text->sh_addr,
+ mod->arch.sec_devinit_text->sh_size);
+ if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
+ mod->arch.unwind_core =
+ unwind_table_add(mod->arch.unw_sec_core->sh_addr,
+ mod->arch.unw_sec_core->sh_size,
+ mod->arch.sec_core_text->sh_addr,
+ mod->arch.sec_core_text->sh_size);
+}
+
+static void unregister_unwind_tables(struct module *mod)
+{
+ unwind_table_del(mod->arch.unwind_init);
+ unwind_table_del(mod->arch.unwind_devinit);
+ unwind_table_del(mod->arch.unwind_core);
+}
+#else
+static inline void register_unwind_tables(struct module *mod) { }
+static inline void unregister_unwind_tables(struct module *mod) { }
+#endif
+
int
module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *module)
{
+ register_unwind_tables(module);
return 0;
}
void
module_arch_cleanup(struct module *mod)
{
+ unregister_unwind_tables(mod);
}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ea6fa..2de14e2 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -34,6 +34,7 @@
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
+#include <asm/stacktrace.h>
#include <asm/mach/time.h>
static const char *processor_modes[] = {
@@ -82,7 +83,7 @@
__setup("nohlt", nohlt_setup);
__setup("hlt", hlt_setup);
-void arm_machine_restart(char mode)
+void arm_machine_restart(char mode, const char *cmd)
{
/*
* Clean and disable cache, and turn off interrupts
@@ -99,7 +100,7 @@
/*
* Now call the architecture specific reboot code.
*/
- arch_reset(mode);
+ arch_reset(mode, cmd);
/*
* Whoops - the architecture was unable to reboot.
@@ -119,7 +120,7 @@
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
-void (*arm_pm_restart)(char str) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
EXPORT_SYMBOL_GPL(arm_pm_restart);
@@ -194,9 +195,9 @@
pm_power_off();
}
-void machine_restart(char * __unused)
+void machine_restart(char *cmd)
{
- arm_pm_restart(reboot_mode);
+ arm_pm_restart(reboot_mode, cmd);
}
void __show_regs(struct pt_regs *regs)
@@ -372,23 +373,21 @@
unsigned long get_wchan(struct task_struct *p)
{
- unsigned long fp, lr;
- unsigned long stack_start, stack_end;
+ struct stackframe frame;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
- stack_start = (unsigned long)end_of_stack(p);
- stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE;
-
- fp = thread_saved_fp(p);
+ frame.fp = thread_saved_fp(p);
+ frame.sp = thread_saved_sp(p);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(p);
do {
- if (fp < stack_start || fp > stack_end)
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
return 0;
- lr = ((unsigned long *)fp)[-1];
- if (!in_sched_functions(lr))
- return lr;
- fp = *(unsigned long *) (fp - 12);
+ if (!in_sched_functions(frame.pc))
+ return frame.pc;
} while (count ++ < 16);
return 0;
}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index df653ea..89882a1 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -653,6 +653,54 @@
}
#endif
+#ifdef CONFIG_VFP
+/*
+ * Get the child VFP state.
+ */
+static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
+{
+ struct thread_info *thread = task_thread_info(tsk);
+ union vfp_state *vfp = &thread->vfpstate;
+ struct user_vfp __user *ufp = data;
+
+ vfp_sync_state(thread);
+
+ /* copy the floating point registers */
+ if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
+ sizeof(vfp->hard.fpregs)))
+ return -EFAULT;
+
+ /* copy the status and control register */
+ if (put_user(vfp->hard.fpscr, &ufp->fpscr))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Set the child VFP state.
+ */
+static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
+{
+ struct thread_info *thread = task_thread_info(tsk);
+ union vfp_state *vfp = &thread->vfpstate;
+ struct user_vfp __user *ufp = data;
+
+ vfp_sync_state(thread);
+
+ /* copy the floating point registers */
+ if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
+ sizeof(vfp->hard.fpregs)))
+ return -EFAULT;
+
+ /* copy the status and control register */
+ if (get_user(vfp->hard.fpscr, &ufp->fpscr))
+ return -EFAULT;
+
+ return 0;
+}
+#endif
+
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
@@ -775,6 +823,16 @@
break;
#endif
+#ifdef CONFIG_VFP
+ case PTRACE_GETVFPREGS:
+ ret = ptrace_getvfpregs(child, (void __user *)data);
+ break;
+
+ case PTRACE_SETVFPREGS:
+ ret = ptrace_setvfpregs(child, (void __user *)data);
+ break;
+#endif
+
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 68d6494..bc5e412 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -40,6 +40,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/traps.h>
+#include <asm/unwind.h>
#include "compat.h"
#include "atags.h"
@@ -685,6 +686,8 @@
struct machine_desc *mdesc;
char *from = default_command_line;
+ unwind_init();
+
setup_processor();
mdesc = setup_machine(machine_arch_type);
machine_name = mdesc->name;
@@ -780,6 +783,8 @@
"crunch",
"thumbee",
"neon",
+ "vfpv3",
+ "vfpv3d16",
NULL
};
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 55fa7ff..7801aac 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -93,6 +93,7 @@
pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+ flush_pmd_entry(pmd);
/*
* We need to tell the secondary core where to find
@@ -130,6 +131,7 @@
secondary_data.pgdir = 0;
*pmd = __pmd(0);
+ clean_pmd_entry(pmd);
pgd_free(&init_mm, pgd);
if (ret) {
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index fc650f6..9f444e5 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -2,34 +2,59 @@
#include <linux/sched.h>
#include <linux/stacktrace.h>
-#include "stacktrace.h"
+#include <asm/stacktrace.h>
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
- int (*fn)(struct stackframe *, void *), void *data)
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ * mov ip, sp
+ * stmdb sp!, {fp, ip, lr, pc}
+ * sub fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ * ldm sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int unwind_frame(struct stackframe *frame)
{
- struct stackframe *frame;
+ unsigned long high, low;
+ unsigned long fp = frame->fp;
- do {
- /*
- * Check current frame pointer is within bounds
- */
- if (fp < (low + 12) || fp + 4 >= high)
- break;
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
- frame = (struct stackframe *)(fp - 12);
+ /* check current frame pointer is within bounds */
+ if (fp < (low + 12) || fp + 4 >= high)
+ return -EINVAL;
+
+ /* restore the registers from the stack frame */
+ frame->fp = *(unsigned long *)(fp - 12);
+ frame->sp = *(unsigned long *)(fp - 8);
+ frame->pc = *(unsigned long *)(fp - 4);
+
+ return 0;
+}
+#endif
+
+void walk_stackframe(struct stackframe *frame,
+ int (*fn)(struct stackframe *, void *), void *data)
+{
+ while (1) {
+ int ret;
if (fn(frame, data))
break;
-
- /*
- * Update the low bound - the next frame must always
- * be at a higher address than the current frame.
- */
- low = fp + 4;
- fp = frame->fp;
- } while (fp);
-
- return 0;
+ ret = unwind_frame(frame);
+ if (ret < 0)
+ break;
+ }
}
EXPORT_SYMBOL(walk_stackframe);
@@ -44,7 +69,7 @@
{
struct stack_trace_data *data = d;
struct stack_trace *trace = data->trace;
- unsigned long addr = frame->lr;
+ unsigned long addr = frame->pc;
if (data->no_sched_functions && in_sched_functions(addr))
return 0;
@@ -61,11 +86,10 @@
void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
{
struct stack_trace_data data;
- unsigned long fp, base;
+ struct stackframe frame;
data.trace = trace;
data.skip = trace->skip;
- base = (unsigned long)task_stack_page(tsk);
if (tsk != current) {
#ifdef CONFIG_SMP
@@ -76,14 +100,22 @@
BUG();
#else
data.no_sched_functions = 1;
- fp = thread_saved_fp(tsk);
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ frame.lr = 0; /* recovered from the stack */
+ frame.pc = thread_saved_pc(tsk);
#endif
} else {
+ register unsigned long current_sp asm ("sp");
+
data.no_sched_functions = 0;
- asm("mov %0, fp" : "=r" (fp));
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)save_stack_trace_tsk;
}
- walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+ walk_stackframe(&frame, save_trace, &data);
if (trace->nr_entries < trace->max_entries)
trace->entries[trace->nr_entries++] = ULONG_MAX;
}
diff --git a/arch/arm/kernel/stacktrace.h b/arch/arm/kernel/stacktrace.h
deleted file mode 100644
index e9fd20c..0000000
--- a/arch/arm/kernel/stacktrace.h
+++ /dev/null
@@ -1,9 +0,0 @@
-struct stackframe {
- unsigned long fp;
- unsigned long sp;
- unsigned long lr;
- unsigned long pc;
-};
-
-int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
- int (*fn)(struct stackframe *, void *), void *data);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index c68b44a..4cdc4a0 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -33,6 +33,7 @@
#include <asm/leds.h>
#include <asm/thread_info.h>
+#include <asm/stacktrace.h>
#include <asm/mach/time.h>
/*
@@ -55,14 +56,22 @@
#ifdef CONFIG_SMP
unsigned long profile_pc(struct pt_regs *regs)
{
- unsigned long fp, pc = instruction_pointer(regs);
+ struct stackframe frame;
- if (in_lock_functions(pc)) {
- fp = regs->ARM_fp;
- pc = ((unsigned long *)fp)[-1];
- }
+ if (!in_lock_functions(regs->ARM_pc))
+ return regs->ARM_pc;
- return pc;
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ do {
+ int ret = unwind_frame(&frame);
+ if (ret < 0)
+ return 0;
+ } while (in_lock_functions(frame.pc));
+
+ return frame.pc;
}
EXPORT_SYMBOL(profile_pc);
#endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 79abc4d..57eb0f6 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/traps.h>
+#include <asm/unwind.h>
#include "ptrace.h"
#include "signal.h"
@@ -61,6 +62,7 @@
dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
+#ifndef CONFIG_ARM_UNWIND
/*
* Stack pointers should always be within the kernels view of
* physical memory. If it is not there, then we can't dump
@@ -74,6 +76,7 @@
return 0;
}
+#endif
/*
* Dump out the contents of some memory nicely...
@@ -150,13 +153,33 @@
set_fs(fs);
}
+#ifdef CONFIG_ARM_UNWIND
+static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ unwind_backtrace(regs, tsk);
+}
+#else
static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
- unsigned int fp;
+ unsigned int fp, mode;
int ok = 1;
printk("Backtrace: ");
- fp = regs->ARM_fp;
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ fp = regs->ARM_fp;
+ mode = processor_mode(regs);
+ } else if (tsk != current) {
+ fp = thread_saved_fp(tsk);
+ mode = 0x10;
+ } else {
+ asm("mov %0, fp" : "=r" (fp) : : "cc");
+ mode = 0x10;
+ }
+
if (!fp) {
printk("no frame pointer");
ok = 0;
@@ -168,29 +191,20 @@
printk("\n");
if (ok)
- c_backtrace(fp, processor_mode(regs));
+ c_backtrace(fp, mode);
}
+#endif
void dump_stack(void)
{
- __backtrace();
+ dump_backtrace(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
void show_stack(struct task_struct *tsk, unsigned long *sp)
{
- unsigned long fp;
-
- if (!tsk)
- tsk = current;
-
- if (tsk != current)
- fp = thread_saved_fp(tsk);
- else
- asm("mov %0, fp" : "=r" (fp) : : "cc");
-
- c_backtrace(fp, 0x10);
+ dump_backtrace(NULL, tsk);
barrier();
}
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
new file mode 100644
index 0000000..1dedc2c
--- /dev/null
+++ b/arch/arm/kernel/unwind.c
@@ -0,0 +1,434 @@
+/*
+ * arch/arm/kernel/unwind.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Stack unwinding support for ARM
+ *
+ * An ARM EABI version of gcc is required to generate the unwind
+ * tables. For information about the structure of the unwind tables,
+ * see "Exception Handling ABI for the ARM Architecture" at:
+ *
+ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#include <asm/stacktrace.h>
+#include <asm/traps.h>
+#include <asm/unwind.h>
+
+/* Dummy functions to avoid linker complaints */
+void __aeabi_unwind_cpp_pr0(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0);
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1);
+
+void __aeabi_unwind_cpp_pr2(void)
+{
+};
+EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
+
+struct unwind_ctrl_block {
+ unsigned long vrs[16]; /* virtual register set */
+ unsigned long *insn; /* pointer to the current instructions word */
+ int entries; /* number of entries left to interpret */
+ int byte; /* current byte number in the instructions word */
+};
+
+enum regs {
+ FP = 11,
+ SP = 13,
+ LR = 14,
+ PC = 15
+};
+
+extern struct unwind_idx __start_unwind_idx[];
+extern struct unwind_idx __stop_unwind_idx[];
+
+static DEFINE_SPINLOCK(unwind_lock);
+static LIST_HEAD(unwind_tables);
+
+/* Convert a prel31 symbol to an absolute address */
+#define prel31_to_addr(ptr) \
+({ \
+ /* sign-extend to 32 bits */ \
+ long offset = (((long)*(ptr)) << 1) >> 1; \
+ (unsigned long)(ptr) + offset; \
+})
+
+/*
+ * Binary search in the unwind index. The entries entries are
+ * guaranteed to be sorted in ascending order by the linker.
+ */
+static struct unwind_idx *search_index(unsigned long addr,
+ struct unwind_idx *first,
+ struct unwind_idx *last)
+{
+ pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+
+ if (addr < first->addr) {
+ pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+ return NULL;
+ } else if (addr >= last->addr)
+ return last;
+
+ while (first < last - 1) {
+ struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+
+ if (addr < mid->addr)
+ last = mid;
+ else
+ first = mid;
+ }
+
+ return first;
+}
+
+static struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+ struct unwind_idx *idx = NULL;
+ unsigned long flags;
+
+ pr_debug("%s(%08lx)\n", __func__, addr);
+
+ if (core_kernel_text(addr))
+ /* main unwind table */
+ idx = search_index(addr, __start_unwind_idx,
+ __stop_unwind_idx - 1);
+ else {
+ /* module unwind tables */
+ struct unwind_table *table;
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_for_each_entry(table, &unwind_tables, list) {
+ if (addr >= table->begin_addr &&
+ addr < table->end_addr) {
+ idx = search_index(addr, table->start,
+ table->stop - 1);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&unwind_lock, flags);
+ }
+
+ pr_debug("%s: idx = %p\n", __func__, idx);
+ return idx;
+}
+
+static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long ret;
+
+ if (ctrl->entries <= 0) {
+ pr_warning("unwind: Corrupt unwind table\n");
+ return 0;
+ }
+
+ ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff;
+
+ if (ctrl->byte == 0) {
+ ctrl->insn++;
+ ctrl->entries--;
+ ctrl->byte = 3;
+ } else
+ ctrl->byte--;
+
+ return ret;
+}
+
+/*
+ * Execute the current unwind instruction.
+ */
+static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long insn = unwind_get_byte(ctrl);
+
+ pr_debug("%s: insn = %08lx\n", __func__, insn);
+
+ if ((insn & 0xc0) == 0x00)
+ ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
+ else if ((insn & 0xc0) == 0x40)
+ ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
+ else if ((insn & 0xf0) == 0x80) {
+ unsigned long mask;
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int load_sp, reg = 4;
+
+ insn = (insn << 8) | unwind_get_byte(ctrl);
+ mask = insn & 0x0fff;
+ if (mask == 0) {
+ pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
+ insn);
+ return -URC_FAILURE;
+ }
+
+ /* pop R4-R15 according to mask */
+ load_sp = mask & (1 << (13 - 4));
+ while (mask) {
+ if (mask & 1)
+ ctrl->vrs[reg] = *vsp++;
+ mask >>= 1;
+ reg++;
+ }
+ if (!load_sp)
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if ((insn & 0xf0) == 0x90 &&
+ (insn & 0x0d) != 0x0d)
+ ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
+ else if ((insn & 0xf0) == 0xa0) {
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int reg;
+
+ /* pop R4-R[4+bbb] */
+ for (reg = 4; reg <= 4 + (insn & 7); reg++)
+ ctrl->vrs[reg] = *vsp++;
+ if (insn & 0x80)
+ ctrl->vrs[14] = *vsp++;
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if (insn == 0xb0) {
+ ctrl->vrs[PC] = ctrl->vrs[LR];
+ /* no further processing */
+ ctrl->entries = 0;
+ } else if (insn == 0xb1) {
+ unsigned long mask = unwind_get_byte(ctrl);
+ unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
+ int reg = 0;
+
+ if (mask == 0 || mask & 0xf0) {
+ pr_warning("unwind: Spare encoding %04lx\n",
+ (insn << 8) | mask);
+ return -URC_FAILURE;
+ }
+
+ /* pop R0-R3 according to mask */
+ while (mask) {
+ if (mask & 1)
+ ctrl->vrs[reg] = *vsp++;
+ mask >>= 1;
+ reg++;
+ }
+ ctrl->vrs[SP] = (unsigned long)vsp;
+ } else if (insn == 0xb2) {
+ unsigned long uleb128 = unwind_get_byte(ctrl);
+
+ ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
+ } else {
+ pr_warning("unwind: Unhandled instruction %02lx\n", insn);
+ return -URC_FAILURE;
+ }
+
+ pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
+ ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
+
+ return URC_OK;
+}
+
+/*
+ * Unwind a single frame starting with *sp for the symbol at *pc. It
+ * updates the *pc and *sp with the new values.
+ */
+int unwind_frame(struct stackframe *frame)
+{
+ unsigned long high, low;
+ struct unwind_idx *idx;
+ struct unwind_ctrl_block ctrl;
+
+ /* only go to a higher address on the stack */
+ low = frame->sp;
+ high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+
+ pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
+ frame->pc, frame->lr, frame->sp);
+
+ if (!kernel_text_address(frame->pc))
+ return -URC_FAILURE;
+
+ idx = unwind_find_idx(frame->pc);
+ if (!idx) {
+ pr_warning("unwind: Index not found %08lx\n", frame->pc);
+ return -URC_FAILURE;
+ }
+
+ ctrl.vrs[FP] = frame->fp;
+ ctrl.vrs[SP] = frame->sp;
+ ctrl.vrs[LR] = frame->lr;
+ ctrl.vrs[PC] = 0;
+
+ if (idx->insn == 1)
+ /* can't unwind */
+ return -URC_FAILURE;
+ else if ((idx->insn & 0x80000000) == 0)
+ /* prel31 to the unwind table */
+ ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
+ else if ((idx->insn & 0xff000000) == 0x80000000)
+ /* only personality routine 0 supported in the index */
+ ctrl.insn = &idx->insn;
+ else {
+ pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
+ idx->insn, idx);
+ return -URC_FAILURE;
+ }
+
+ /* check the personality routine */
+ if ((*ctrl.insn & 0xff000000) == 0x80000000) {
+ ctrl.byte = 2;
+ ctrl.entries = 1;
+ } else if ((*ctrl.insn & 0xff000000) == 0x81000000) {
+ ctrl.byte = 1;
+ ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
+ } else {
+ pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
+ *ctrl.insn, ctrl.insn);
+ return -URC_FAILURE;
+ }
+
+ while (ctrl.entries > 0) {
+ int urc;
+
+ if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
+ return -URC_FAILURE;
+ urc = unwind_exec_insn(&ctrl);
+ if (urc < 0)
+ return urc;
+ }
+
+ if (ctrl.vrs[PC] == 0)
+ ctrl.vrs[PC] = ctrl.vrs[LR];
+
+ frame->fp = ctrl.vrs[FP];
+ frame->sp = ctrl.vrs[SP];
+ frame->lr = ctrl.vrs[LR];
+ frame->pc = ctrl.vrs[PC];
+
+ return URC_OK;
+}
+
+void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+ struct stackframe frame;
+ unsigned long high, low;
+ register unsigned long current_sp asm ("sp");
+
+ pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+ if (!tsk)
+ tsk = current;
+
+ if (regs) {
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ } else if (tsk == current) {
+ frame.fp = (unsigned long)__builtin_frame_address(0);
+ frame.sp = current_sp;
+ frame.lr = (unsigned long)__builtin_return_address(0);
+ frame.pc = (unsigned long)unwind_backtrace;
+ } else {
+ /* task blocked in __switch_to */
+ frame.fp = thread_saved_fp(tsk);
+ frame.sp = thread_saved_sp(tsk);
+ /*
+ * The function calling __switch_to cannot be a leaf function
+ * so LR is recovered from the stack.
+ */
+ frame.lr = 0;
+ frame.pc = thread_saved_pc(tsk);
+ }
+
+ low = frame.sp & ~(THREAD_SIZE - 1);
+ high = low + THREAD_SIZE;
+
+ while (1) {
+ int urc;
+ unsigned long where = frame.pc;
+
+ urc = unwind_frame(&frame);
+ if (urc < 0)
+ break;
+ dump_backtrace_entry(where, frame.pc, frame.sp - 4);
+ }
+}
+
+struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
+ unsigned long text_addr,
+ unsigned long text_size)
+{
+ unsigned long flags;
+ struct unwind_idx *idx;
+ struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
+
+ pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
+ text_addr, text_size);
+
+ if (!tab)
+ return tab;
+
+ tab->start = (struct unwind_idx *)start;
+ tab->stop = (struct unwind_idx *)(start + size);
+ tab->begin_addr = text_addr;
+ tab->end_addr = text_addr + text_size;
+
+ /* Convert the symbol addresses to absolute values */
+ for (idx = tab->start; idx < tab->stop; idx++)
+ idx->addr = prel31_to_addr(&idx->addr);
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_add_tail(&tab->list, &unwind_tables);
+ spin_unlock_irqrestore(&unwind_lock, flags);
+
+ return tab;
+}
+
+void unwind_table_del(struct unwind_table *tab)
+{
+ unsigned long flags;
+
+ if (!tab)
+ return;
+
+ spin_lock_irqsave(&unwind_lock, flags);
+ list_del(&tab->list);
+ spin_unlock_irqrestore(&unwind_lock, flags);
+
+ kfree(tab);
+}
+
+int __init unwind_init(void)
+{
+ struct unwind_idx *idx;
+
+ /* Convert the symbol addresses to absolute values */
+ for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
+ idx->addr = prel31_to_addr(&idx->addr);
+
+ pr_debug("unwind: ARM stack unwinding initialised\n");
+
+ return 0;
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 0021607..5f66459 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -80,6 +80,8 @@
EXIT_TEXT
EXIT_DATA
*(.exitcall.exit)
+ *(.ARM.exidx.exit.text)
+ *(.ARM.extab.exit.text)
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
@@ -110,6 +112,23 @@
_etext = .; /* End of text and rodata section */
+#ifdef CONFIG_ARM_UNWIND
+ /*
+ * Stack unwinding tables
+ */
+ . = ALIGN(8);
+ .ARM.unwind_idx : {
+ __start_unwind_idx = .;
+ *(.ARM.exidx*)
+ __stop_unwind_idx = .;
+ }
+ .ARM.unwind_tab : {
+ __start_unwind_tab = .;
+ *(.ARM.extab*)
+ __stop_unwind_tab = .;
+ }
+#endif
+
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = PAGE_OFFSET + TEXT_OFFSET;
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
index 8f4115d..fe08ca1 100644
--- a/arch/arm/mach-aaec2000/include/mach/system.h
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -16,7 +16,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 134af97..b7f2332 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -347,6 +347,111 @@
void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+ defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_4,
+ .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ }
+};
+
+static struct platform_device cf0_device = {
+ .id = 0,
+ .dev = {
+ .platform_data = &cf0_data,
+ },
+ .resource = cf0_resources,
+ .num_resources = ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_5,
+ .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ }
+};
+
+static struct platform_device cf1_device = {
+ .id = 1,
+ .dev = {
+ .platform_data = &cf1_data,
+ },
+ .resource = cf1_resources,
+ .num_resources = ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ unsigned long ebi0_csa;
+ struct platform_device *pdev;
+
+ if (!data)
+ return;
+
+ /*
+ * assign CS4 or CS5 to SMC with Compact Flash logic support,
+ * we assume SMC timings are configured by board code,
+ * except True IDE where timings are controlled by driver
+ */
+ ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ switch (data->chipselect) {
+ case 4:
+ at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
+ ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+ cf0_data = *data;
+ pdev = &cf0_device;
+ break;
+ case 5:
+ at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
+ ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+ cf1_data = *data;
+ pdev = &cf1_device;
+ break;
+ default:
+ printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+ data->chipselect);
+ return;
+ }
+ at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 1);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+
+ if (data->vcc_pin)
+ /* initially off */
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* enable EBI controlled pins */
+ at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
+ at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
+ at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 81439fe..438efbb 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -238,6 +238,10 @@
at91_add_device_i2c(NULL, 0);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* PCK0 provides MCLK to the WM8731 */
+ at91_set_B_periph(AT91_PIN_PC1, 0);
+ /* SSC (for WM8731) */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 7b9ce7a..b5daf7f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -47,9 +47,6 @@
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
struct at91_gpio_bank {
- unsigned chipbase; /* bank's first GPIO number */
- void __iomem *regbase; /* base of register bank */
- struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
unsigned short id; /* peripheral ID */
unsigned long offset; /* offset from system peripheral base */
struct clk *clock; /* associated clock */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 2f7d497..f2236f0 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -24,19 +24,59 @@
#include <mach/at91_pio.h>
#include <mach/gpio.h>
+#include <asm/gpio.h>
+
#include "generic.h"
+struct at91_gpio_chip {
+ struct gpio_chip chip;
+ struct at91_gpio_chip *next; /* Bank sharing same clock */
+ struct at91_gpio_bank *bank; /* Bank definition */
+ void __iomem *regbase; /* Base of register bank */
+};
-static struct at91_gpio_bank *gpio;
+#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val);
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset);
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
+
+#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
+ { \
+ .chip = { \
+ .label = name, \
+ .request = at91_gpiolib_request, \
+ .direction_input = at91_gpiolib_direction_input, \
+ .direction_output = at91_gpiolib_direction_output, \
+ .get = at91_gpiolib_get, \
+ .set = at91_gpiolib_set, \
+ .dbg_show = at91_gpiolib_dbg_show, \
+ .base = base_gpio, \
+ .ngpio = nr_gpio, \
+ }, \
+ }
+
+static struct at91_gpio_chip gpio_chip[] = {
+ AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+};
+
static int gpio_banks;
-
static inline void __iomem *pin_to_controller(unsigned pin)
{
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
- return gpio[pin].regbase;
+ return gpio_chip[pin].regbase;
return NULL;
}
@@ -197,39 +237,6 @@
}
EXPORT_SYMBOL(at91_set_multi_drive);
-/*--------------------------------------------------------------------------*/
-
-/* new-style GPIO calls; these expect at91_set_GPIO_periph to have been
- * called, and maybe at91_set_multi_drive() for putout pins.
- */
-
-int gpio_direction_input(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
- return -EINVAL;
- __raw_writel(mask, pio + PIO_ODR);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
- return -EINVAL;
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- __raw_writel(mask, pio + PIO_OER);
- return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-/*--------------------------------------------------------------------------*/
-
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
@@ -282,7 +289,7 @@
else
wakeups[bank] &= ~mask;
- set_irq_wake(gpio[bank].id, state);
+ set_irq_wake(gpio_chip[bank].bank->id, state);
return 0;
}
@@ -292,14 +299,14 @@
int i;
for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio[i].regbase;
+ void __iomem *pio = gpio_chip[i].regbase;
backups[i] = __raw_readl(pio + PIO_IMR);
__raw_writel(backups[i], pio + PIO_IDR);
__raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
- clk_disable(gpio[i].clock);
+ clk_disable(gpio_chip[i].bank->clock);
else {
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -313,10 +320,10 @@
int i;
for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio[i].regbase;
+ void __iomem *pio = gpio_chip[i].regbase;
if (!wakeups[i])
- clk_enable(gpio[i].clock);
+ clk_enable(gpio_chip[i].bank->clock);
__raw_writel(wakeups[i], pio + PIO_IDR);
__raw_writel(backups[i], pio + PIO_IER);
@@ -380,12 +387,12 @@
{
unsigned pin;
struct irq_desc *gpio;
- struct at91_gpio_bank *bank;
+ struct at91_gpio_chip *at91_gpio;
void __iomem *pio;
u32 isr;
- bank = get_irq_chip_data(irq);
- pio = bank->regbase;
+ at91_gpio = get_irq_chip_data(irq);
+ pio = at91_gpio->regbase;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
@@ -396,14 +403,14 @@
*/
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
if (!isr) {
- if (!bank->next)
+ if (!at91_gpio->next)
break;
- bank = bank->next;
- pio = bank->regbase;
+ at91_gpio = at91_gpio->next;
+ pio = at91_gpio->regbase;
continue;
}
- pin = bank->chipbase;
+ pin = at91_gpio->chip.base;
gpio = &irq_desc[pin];
while (isr) {
@@ -502,17 +509,17 @@
void __init at91_gpio_irq_setup(void)
{
unsigned pioc, pin;
- struct at91_gpio_bank *this, *prev;
+ struct at91_gpio_chip *this, *prev;
- for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
+ for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
pioc++ < gpio_banks;
prev = this, this++) {
- unsigned id = this->id;
+ unsigned id = this->bank->id;
unsigned i;
__raw_writel(~0, this->regbase + PIO_IDR);
- for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+ for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
/*
@@ -537,32 +544,117 @@
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
}
+/* gpiolib support */
+static int at91_gpiolib_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + PIO_ODR);
+ return 0;
+}
+
+static int at91_gpiolib_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+ __raw_writel(mask, pio + PIO_OER);
+ return 0;
+}
+
+static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+ u32 pdsr;
+
+ pdsr = __raw_readl(pio + PIO_PDSR);
+ return (pdsr & mask) != 0;
+}
+
+static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
+}
+
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned pin = chip->base + offset;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ /* Cannot request GPIOs that are in alternate function mode */
+ if (!(__raw_readl(pio + PIO_PSR) & mask))
+ return -EPERM;
+
+ return 0;
+}
+
+static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ int i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ unsigned pin = chip->base + i;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+ const char *gpio_label;
+
+ gpio_label = gpiochip_is_requested(chip, i);
+ if (gpio_label) {
+ seq_printf(s, "[%s] GPIO%s%d: ",
+ gpio_label, chip->label, i);
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ seq_printf(s, "[gpio] %s\n",
+ at91_get_gpio_value(pin) ?
+ "set" : "clear");
+ else
+ seq_printf(s, "[periph %s]\n",
+ __raw_readl(pio + PIO_ABSR) &
+ mask ? "B" : "A");
+ }
+ }
+}
+
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
{
unsigned i;
- struct at91_gpio_bank *last;
+ struct at91_gpio_chip *at91_gpio, *last = NULL;
BUG_ON(nr_banks > MAX_GPIO_BANKS);
- gpio = data;
gpio_banks = nr_banks;
- for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
- data->chipbase = PIN_BASE + i * 32;
- data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
+ for (i = 0; i < nr_banks; i++) {
+ at91_gpio = &gpio_chip[i];
+
+ at91_gpio->bank = &data[i];
+ at91_gpio->chip.base = PIN_BASE + i * 32;
+ at91_gpio->regbase = at91_gpio->bank->offset +
+ (void __iomem *)AT91_VA_BASE_SYS;
/* enable PIO controller's clock */
- clk_enable(data->clock);
+ clk_enable(at91_gpio->bank->clock);
- /*
- * Some processors share peripheral ID between multiple GPIO banks.
- * SAM9263 (PIOC, PIOD, PIOE)
- * CAP9 (PIOA, PIOB, PIOC, PIOD)
- */
- if (last && last->id == data->id)
- last->next = data;
+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ if (last && last->bank->id == at91_gpio->bank->id)
+ last->next = at91_gpio;
+ last = at91_gpio;
+
+ gpiochip_add(&at91_gpio->chip);
}
}
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 0b3ae21..793fe7b 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -56,6 +56,9 @@
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
+ u8 flags;
+#define AT91_CF_TRUE_IDE 0x01
+#define AT91_IDE_SWAP_A0_A2 0x02
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index bffa674..04c91e3 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -213,32 +213,12 @@
*/
#include <asm/errno.h>
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-}
-
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return at91_get_gpio_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- at91_set_gpio_value(gpio, value);
-}
-
#include <asm-generic/gpio.h> /* cansleep wrappers */
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
static inline int gpio_to_irq(unsigned gpio)
{
return gpio;
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index e712658..5268af3 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -43,7 +43,7 @@
void (*at91_arch_reset)(void);
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/* call the CPU-specific reset function */
if (at91_arch_reset)
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index 24e9615..f916cd7 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -32,7 +32,7 @@
mov r0, r0");
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 17ca41d..b7e7036 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -21,7 +21,7 @@
cpu_do_idle();
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
davinci_watchdog_reset();
}
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index 350a028..9a26245 100644
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -34,6 +34,6 @@
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
-#define arch_reset(mode) cpu_reset(0x80000000)
+#define arch_reset(mode, cmd) cpu_reset(0x80000000)
#endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 944e42d..9522e20 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the linux kernel.
#
-obj-y := core.o clock.o gpio.o
+obj-y := core.o clock.o dma-m2p.o gpio.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 9604928..e8ebeae 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -41,6 +41,56 @@
.enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
};
+/* DMA Clocks */
+static struct clk clk_m2p0 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00020000,
+};
+static struct clk clk_m2p1 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00010000,
+};
+static struct clk clk_m2p2 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00080000,
+};
+static struct clk clk_m2p3 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00040000,
+};
+static struct clk clk_m2p4 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00200000,
+};
+static struct clk clk_m2p5 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00100000,
+};
+static struct clk clk_m2p6 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00800000,
+};
+static struct clk clk_m2p7 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x00400000,
+};
+static struct clk clk_m2p8 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x02000000,
+};
+static struct clk clk_m2p9 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x01000000,
+};
+static struct clk clk_m2m0 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x04000000,
+};
+static struct clk clk_m2m1 = {
+ .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
+ .enable_mask = 0x08000000,
+};
+
#define INIT_CK(dev,con,ck) \
{ .dev_id = dev, .con_id = con, .clk = ck }
@@ -54,6 +104,18 @@
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK(NULL, "usb_host", &clk_usb_host),
+ INIT_CK(NULL, "m2p0", &clk_m2p0),
+ INIT_CK(NULL, "m2p1", &clk_m2p1),
+ INIT_CK(NULL, "m2p2", &clk_m2p2),
+ INIT_CK(NULL, "m2p3", &clk_m2p3),
+ INIT_CK(NULL, "m2p4", &clk_m2p4),
+ INIT_CK(NULL, "m2p5", &clk_m2p5),
+ INIT_CK(NULL, "m2p6", &clk_m2p6),
+ INIT_CK(NULL, "m2p7", &clk_m2p7),
+ INIT_CK(NULL, "m2p8", &clk_m2p8),
+ INIT_CK(NULL, "m2p9", &clk_m2p9),
+ INIT_CK(NULL, "m2m0", &clk_m2m0),
+ INIT_CK(NULL, "m2m1", &clk_m2m1),
};
@@ -110,6 +172,22 @@
return (unsigned long)rate;
}
+static void __init ep93xx_dma_clock_init(void)
+{
+ clk_m2p0.rate = clk_h.rate;
+ clk_m2p1.rate = clk_h.rate;
+ clk_m2p2.rate = clk_h.rate;
+ clk_m2p3.rate = clk_h.rate;
+ clk_m2p4.rate = clk_h.rate;
+ clk_m2p5.rate = clk_h.rate;
+ clk_m2p6.rate = clk_h.rate;
+ clk_m2p7.rate = clk_h.rate;
+ clk_m2p8.rate = clk_h.rate;
+ clk_m2p9.rate = clk_h.rate;
+ clk_m2m0.rate = clk_h.rate;
+ clk_m2m1.rate = clk_h.rate;
+}
+
static int __init ep93xx_clock_init(void)
{
u32 value;
@@ -124,6 +202,7 @@
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
+ ep93xx_dma_clock_init();
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
new file mode 100644
index 0000000..a2df5bb
--- /dev/null
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -0,0 +1,408 @@
+/*
+ * arch/arm/mach-ep93xx/dma-m2p.c
+ * M2P DMA handling for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+/*
+ * On the EP93xx chip the following peripherals my be allocated to the 10
+ * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
+ *
+ * I2S contains 3 Tx and 3 Rx DMA Channels
+ * AAC contains 3 Tx and 3 Rx DMA Channels
+ * UART1 contains 1 Tx and 1 Rx DMA Channels
+ * UART2 contains 1 Tx and 1 Rx DMA Channels
+ * UART3 contains 1 Tx and 1 Rx DMA Channels
+ * IrDA contains 1 Tx and 1 Rx DMA Channels
+ *
+ * SSP and IDE use the Memory to Memory (M2M) channels and are not covered
+ * with this implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <mach/dma.h>
+#include <mach/hardware.h>
+
+#define M2P_CONTROL 0x00
+#define M2P_CONTROL_STALL_IRQ_EN (1 << 0)
+#define M2P_CONTROL_NFB_IRQ_EN (1 << 1)
+#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3)
+#define M2P_CONTROL_ENABLE (1 << 4)
+#define M2P_INTERRUPT 0x04
+#define M2P_INTERRUPT_STALL (1 << 0)
+#define M2P_INTERRUPT_NFB (1 << 1)
+#define M2P_INTERRUPT_ERROR (1 << 3)
+#define M2P_PPALLOC 0x08
+#define M2P_STATUS 0x0c
+#define M2P_REMAIN 0x14
+#define M2P_MAXCNT0 0x20
+#define M2P_BASE0 0x24
+#define M2P_MAXCNT1 0x30
+#define M2P_BASE1 0x34
+
+#define STATE_IDLE 0 /* Channel is inactive. */
+#define STATE_STALL 1 /* Channel is active, no buffers pending. */
+#define STATE_ON 2 /* Channel is active, one buffer pending. */
+#define STATE_NEXT 3 /* Channel is active, two buffers pending. */
+
+struct m2p_channel {
+ char *name;
+ void __iomem *base;
+ int irq;
+
+ struct clk *clk;
+ spinlock_t lock;
+
+ void *client;
+ unsigned next_slot:1;
+ struct ep93xx_dma_buffer *buffer_xfer;
+ struct ep93xx_dma_buffer *buffer_next;
+ struct list_head buffers_pending;
+};
+
+static struct m2p_channel m2p_rx[] = {
+ {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1},
+ {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3},
+ {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5},
+ {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7},
+ {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9},
+ {NULL},
+};
+
+static struct m2p_channel m2p_tx[] = {
+ {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0},
+ {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2},
+ {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4},
+ {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6},
+ {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8},
+ {NULL},
+};
+
+static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf)
+{
+ if (ch->next_slot == 0) {
+ writel(buf->size, ch->base + M2P_MAXCNT0);
+ writel(buf->bus_addr, ch->base + M2P_BASE0);
+ } else {
+ writel(buf->size, ch->base + M2P_MAXCNT1);
+ writel(buf->bus_addr, ch->base + M2P_BASE1);
+ }
+ ch->next_slot ^= 1;
+}
+
+static void choose_buffer_xfer(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_buffer *buf;
+
+ ch->buffer_xfer = NULL;
+ if (!list_empty(&ch->buffers_pending)) {
+ buf = list_entry(ch->buffers_pending.next,
+ struct ep93xx_dma_buffer, list);
+ list_del(&buf->list);
+ feed_buf(ch, buf);
+ ch->buffer_xfer = buf;
+ }
+}
+
+static void choose_buffer_next(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_buffer *buf;
+
+ ch->buffer_next = NULL;
+ if (!list_empty(&ch->buffers_pending)) {
+ buf = list_entry(ch->buffers_pending.next,
+ struct ep93xx_dma_buffer, list);
+ list_del(&buf->list);
+ feed_buf(ch, buf);
+ ch->buffer_next = buf;
+ }
+}
+
+static inline void m2p_set_control(struct m2p_channel *ch, u32 v)
+{
+ /*
+ * The control register must be read immediately after being written so
+ * that the internal state machine is correctly updated. See the ep93xx
+ * users' guide for details.
+ */
+ writel(v, ch->base + M2P_CONTROL);
+ readl(ch->base + M2P_CONTROL);
+}
+
+static inline int m2p_channel_state(struct m2p_channel *ch)
+{
+ return (readl(ch->base + M2P_STATUS) >> 4) & 0x3;
+}
+
+static irqreturn_t m2p_irq(int irq, void *dev_id)
+{
+ struct m2p_channel *ch = dev_id;
+ struct ep93xx_dma_m2p_client *cl;
+ u32 irq_status, v;
+ int error = 0;
+
+ cl = ch->client;
+
+ spin_lock(&ch->lock);
+ irq_status = readl(ch->base + M2P_INTERRUPT);
+
+ if (irq_status & M2P_INTERRUPT_ERROR) {
+ writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT);
+ error = 1;
+ }
+
+ if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) {
+ spin_unlock(&ch->lock);
+ return IRQ_NONE;
+ }
+
+ switch (m2p_channel_state(ch)) {
+ case STATE_IDLE:
+ pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+ BUG();
+ break;
+
+ case STATE_STALL:
+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+ if (ch->buffer_next != NULL) {
+ cl->buffer_finished(cl->cookie, ch->buffer_next,
+ 0, error);
+ }
+ choose_buffer_xfer(ch);
+ choose_buffer_next(ch);
+ if (ch->buffer_xfer != NULL)
+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
+ break;
+
+ case STATE_ON:
+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error);
+ ch->buffer_xfer = ch->buffer_next;
+ choose_buffer_next(ch);
+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
+ break;
+
+ case STATE_NEXT:
+ pr_crit("m2p_irq: dma interrupt while next\n");
+ BUG();
+ break;
+ }
+
+ v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN |
+ M2P_CONTROL_NFB_IRQ_EN);
+ if (ch->buffer_xfer != NULL)
+ v |= M2P_CONTROL_STALL_IRQ_EN;
+ if (ch->buffer_next != NULL)
+ v |= M2P_CONTROL_NFB_IRQ_EN;
+ m2p_set_control(ch, v);
+
+ spin_unlock(&ch->lock);
+ return IRQ_HANDLED;
+}
+
+static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch;
+ int i;
+
+ if (cl->flags & EP93XX_DMA_M2P_RX)
+ ch = m2p_rx;
+ else
+ ch = m2p_tx;
+
+ for (i = 0; ch[i].base; i++) {
+ struct ep93xx_dma_m2p_client *client;
+
+ client = ch[i].client;
+ if (client != NULL) {
+ int port;
+
+ port = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+ if (port == (client->flags &
+ EP93XX_DMA_M2P_PORT_MASK)) {
+ pr_warning("DMA channel already used by %s\n",
+ cl->name ? : "unknown client");
+ return ERR_PTR(-EBUSY);
+ }
+ }
+ }
+
+ for (i = 0; ch[i].base; i++) {
+ if (ch[i].client == NULL)
+ return ch + i;
+ }
+
+ pr_warning("No free DMA channel for %s\n",
+ cl->name ? : "unknown client");
+ return ERR_PTR(-ENODEV);
+}
+
+static void channel_enable(struct m2p_channel *ch)
+{
+ struct ep93xx_dma_m2p_client *cl = ch->client;
+ u32 v;
+
+ clk_enable(ch->clk);
+
+ v = cl->flags & EP93XX_DMA_M2P_PORT_MASK;
+ writel(v, ch->base + M2P_PPALLOC);
+
+ v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK;
+ v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN;
+ m2p_set_control(ch, v);
+}
+
+static void channel_disable(struct m2p_channel *ch)
+{
+ u32 v;
+
+ v = readl(ch->base + M2P_CONTROL);
+ v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
+ m2p_set_control(ch, v);
+
+ while (m2p_channel_state(ch) == STATE_ON)
+ cpu_relax();
+
+ m2p_set_control(ch, 0x0);
+
+ while (m2p_channel_state(ch) == STATE_STALL)
+ cpu_relax();
+
+ clk_disable(ch->clk);
+}
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch;
+ int err;
+
+ ch = find_free_channel(cl);
+ if (IS_ERR(ch))
+ return PTR_ERR(ch);
+
+ err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch);
+ if (err)
+ return err;
+
+ ch->client = cl;
+ ch->next_slot = 0;
+ ch->buffer_xfer = NULL;
+ ch->buffer_next = NULL;
+ INIT_LIST_HEAD(&ch->buffers_pending);
+
+ cl->channel = ch;
+
+ channel_enable(ch);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register);
+
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ channel_disable(ch);
+ free_irq(ch->irq, ch);
+ ch->client = NULL;
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister);
+
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl,
+ struct ep93xx_dma_buffer *buf)
+{
+ struct m2p_channel *ch = cl->channel;
+ unsigned long flags;
+ u32 v;
+
+ spin_lock_irqsave(&ch->lock, flags);
+ v = readl(ch->base + M2P_CONTROL);
+ if (ch->buffer_xfer == NULL) {
+ ch->buffer_xfer = buf;
+ feed_buf(ch, buf);
+ cl->buffer_started(cl->cookie, buf);
+
+ v |= M2P_CONTROL_STALL_IRQ_EN;
+ m2p_set_control(ch, v);
+
+ } else if (ch->buffer_next == NULL) {
+ ch->buffer_next = buf;
+ feed_buf(ch, buf);
+
+ v |= M2P_CONTROL_NFB_IRQ_EN;
+ m2p_set_control(ch, v);
+ } else {
+ list_add_tail(&buf->list, &ch->buffers_pending);
+ }
+ spin_unlock_irqrestore(&ch->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit);
+
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl,
+ struct ep93xx_dma_buffer *buf)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ list_add_tail(&buf->list, &ch->buffers_pending);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive);
+
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl)
+{
+ struct m2p_channel *ch = cl->channel;
+
+ channel_disable(ch);
+ ch->next_slot = 0;
+ ch->buffer_xfer = NULL;
+ ch->buffer_next = NULL;
+ INIT_LIST_HEAD(&ch->buffers_pending);
+ channel_enable(ch);
+}
+EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush);
+
+static int init_channel(struct m2p_channel *ch)
+{
+ ch->clk = clk_get(NULL, ch->name);
+ if (IS_ERR(ch->clk))
+ return PTR_ERR(ch->clk);
+
+ spin_lock_init(&ch->lock);
+ ch->client = NULL;
+
+ return 0;
+}
+
+static int __init ep93xx_dma_m2p_init(void)
+{
+ int i;
+ int ret;
+
+ for (i = 0; m2p_rx[i].base; i++) {
+ ret = init_channel(m2p_rx + i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; m2p_tx[i].base; i++) {
+ ret = init_channel(m2p_tx + i);
+ if (ret)
+ return ret;
+ }
+
+ pr_info("M2P DMA subsystem initialized\n");
+ return 0;
+}
+arch_initcall(ep93xx_dma_m2p_init);
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
index 5b5c22b..6171167 100644
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ b/arch/arm/mach-ep93xx/edb9307a.c
@@ -48,12 +48,24 @@
.phy_id = 1,
};
+static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
+ {
+ /* On-board battery backed RTC */
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+ /*
+ * The I2C signals are also routed to the Expansion Connector (J4)
+ */
+};
+
static void __init edb9307a_init_machine(void)
{
ep93xx_init_devices();
platform_device_register(&edb9307a_flash);
ep93xx_register_eth(&edb9307a_eth_data, 1);
+
+ ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
}
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 0000000..ef6bd9d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct ep93xx_dma_buffer {
+ struct list_head list;
+ u32 bus_addr;
+ u16 size;
+};
+
+struct ep93xx_dma_m2p_client {
+ char *name;
+ u8 flags;
+ void *cookie;
+ void (*buffer_started)(void *cookie,
+ struct ep93xx_dma_buffer *buf);
+ void (*buffer_finished)(void *cookie,
+ struct ep93xx_dma_buffer *buf,
+ int bytes, int error);
+
+ /* Internal to the DMA code. */
+ void *channel;
+};
+
+#define EP93XX_DMA_M2P_PORT_I2S1 0x00
+#define EP93XX_DMA_M2P_PORT_I2S2 0x01
+#define EP93XX_DMA_M2P_PORT_AAC1 0x02
+#define EP93XX_DMA_M2P_PORT_AAC2 0x03
+#define EP93XX_DMA_M2P_PORT_AAC3 0x04
+#define EP93XX_DMA_M2P_PORT_I2S3 0x05
+#define EP93XX_DMA_M2P_PORT_UART1 0x06
+#define EP93XX_DMA_M2P_PORT_UART2 0x07
+#define EP93XX_DMA_M2P_PORT_UART3 0x08
+#define EP93XX_DMA_M2P_PORT_IRDA 0x09
+#define EP93XX_DMA_M2P_PORT_MASK 0x0f
+#define EP93XX_DMA_M2P_TX 0x00
+#define EP93XX_DMA_M2P_RX 0x10
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
+#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
+#define EP93XX_DMA_M2P_ERROR_MASK 0x60
+
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
+ struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
+ struct ep93xx_dma_buffer *buf);
+void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 22d6c9a..f66be12 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -58,7 +58,8 @@
/* AHB peripherals */
-#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
+#define EP93XX_DMA_BASE ((void __iomem *) \
+ (EP93XX_AHB_VIRT_BASE + 0x00000000))
#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 88f7e88..05f0f4f 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,8 @@
#ifndef __ASSEMBLY__
+struct i2c_board_info;
+
struct ep93xx_eth_data
{
unsigned char dev_addr[6];
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index 67789d0..ed8f35e 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -9,7 +9,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
u32 devicecfg;
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
index 4f35063..e2e0df8 100644
--- a/arch/arm/mach-footbridge/dma.c
+++ b/arch/arm/mach-footbridge/dma.c
@@ -21,16 +21,16 @@
#include <asm/hardware/dec21285.h>
#if 0
-static int fb_dma_request(dmach_t channel, dma_t *dma)
+static int fb_dma_request(unsigned int chan, dma_t *dma)
{
return -EINVAL;
}
-static void fb_dma_enable(dmach_t channel, dma_t *dma)
+static void fb_dma_enable(unsigned int chan, dma_t *dma)
{
}
-static void fb_dma_disable(dmach_t channel, dma_t *dma)
+static void fb_dma_disable(unsigned int chan, dma_t *dma)
{
}
@@ -42,7 +42,7 @@
};
#endif
-void __init arch_dma_init(dma_t *dma)
+static int __init fb_dma_init(void)
{
#if 0
dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
@@ -50,6 +50,8 @@
#endif
#ifdef CONFIG_ISA_DMA
if (footbridge_cfn_mode())
- isa_init_dma(dma + _ISA_DMA(0));
+ isa_init_dma();
#endif
+ return 0;
}
+core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 2db7f36..0b29315 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -18,7 +18,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
/*
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
index e4a7c76..a708d24 100644
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -25,7 +25,7 @@
}
-static __inline__ void arch_reset(char mode)
+static __inline__ void arch_reset(char mode, const char *cmd)
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
index adee7e5..46d4ca9 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -32,7 +32,7 @@
}
static inline void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
index c485345..e1551b8 100644
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -32,7 +32,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index e012bf1..42ae29b 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -59,7 +59,10 @@
})
#define __arch_page_to_dma(dev, page) \
- __arch_virt_to_dma(dev, page_address(page))
+ ({ \
+ /* __is_lbus_virt() can never be true for RAM pages */ \
+ (dma_addr_t)page_to_phys(page); \
+ })
#endif /* CONFIG_ARCH_IOP13XX */
#endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index c7127f4..d0c66ef 100644
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -13,7 +13,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Reset the internal bus (warning both cores are reset)
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index 32d9e5b..a4b808f 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -16,7 +16,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
local_irq_disable();
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index 0cb3ad8..f192a34 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -14,7 +14,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
*IOP3XX_PCSR = 0x30;
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index 2e9c68f..de37099 100644
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -17,7 +17,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
local_irq_disable();
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index d57c3fc..8920ff2 100644
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -19,7 +19,7 @@
#endif
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/* First try machine specific support */
if (machine_is_ixdp2351()) {
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index d816c51..70afcfe 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -366,7 +366,7 @@
}
void __init ixp4xx_pci_preinit(void)
-{
+{
unsigned long cpuid = read_cpuid_id();
/*
@@ -386,17 +386,17 @@
pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
- /*
+ /*
* We use identity AHB->PCI address translation
* in the 0x48000000 to 0x4bffffff address space
*/
*PCI_PCIMEMBASE = 0x48494A4B;
- /*
+ /*
* We also use identity PCI->AHB address translation
* in 4 16MB BARs that begin at the physical memory start
*/
- *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
+ *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
((PHYS_OFFSET & 0xFF000000) >> 8) +
((PHYS_OFFSET & 0xFF000000) >> 16) +
((PHYS_OFFSET & 0xFF000000) >> 24) +
@@ -408,18 +408,19 @@
pr_debug("setup BARs in controller\n");
/*
- * We configure the PCI inbound memory windows to be
+ * We configure the PCI inbound memory windows to be
* 1:1 mapped to SDRAM
*/
- local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
- local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
- local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
- local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);
+ local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
+ local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
+ local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
+ local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M);
/*
- * Enable CSR window at 0xff000000.
+ * Enable CSR window at 64 MiB to allow PCI masters
+ * to continue prefetching past 64 MiB boundary.
*/
- local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);
+ local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
/*
* Enable the IO window to be way up high, at 0xfffffc00
@@ -500,7 +501,7 @@
return 1;
}
-struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
}
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index 51bd69c..def7773 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -17,26 +17,31 @@
#include <asm/cputype.h>
/* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE 0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE 0x69054040
-#define IXP465_PROCESSOR_ID_VALUE 0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0
+#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */
+#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0
-#define cpu_is_ixp42x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x() ((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
- IXP465_PROCESSOR_ID_VALUE)
+#define IXP43X_PROCESSOR_ID_VALUE 0x69054040
+#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0
+
+#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
+#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+
+#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
+ IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
+ IXP43X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
+ IXP46X_PROCESSOR_ID_VALUE)
static inline u32 ixp4xx_read_feature_bits(void)
{
unsigned int val = ~*IXP4XX_EXP_CFG2;
- val &= ~IXP4XX_FEATURE_RESERVED;
- if (!cpu_is_ixp46x())
- val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
- return val;
+ if (cpu_is_ixp42x())
+ return val & IXP42X_FEATURE_MASK;
+ if (cpu_is_ixp43x())
+ return val & IXP43X_FEATURE_MASK;
+ return val & IXP46X_FEATURE_MASK;
}
static inline void ixp4xx_write_feature_bits(u32 value)
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index ad9c888..97c530f 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -604,6 +604,7 @@
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
#define IXP4XX_FEATURE_RCOMP (1 << 0)
#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
#define IXP4XX_FEATURE_HASH (1 << 2)
@@ -619,20 +620,41 @@
#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
#define IXP4XX_FEATURE_PCI (1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
+#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \
+ IXP4XX_FEATURE_USB_DEVICE | \
+ IXP4XX_FEATURE_HASH | \
+ IXP4XX_FEATURE_AES | \
+ IXP4XX_FEATURE_DES | \
+ IXP4XX_FEATURE_HDLC | \
+ IXP4XX_FEATURE_AAL | \
+ IXP4XX_FEATURE_HSS | \
+ IXP4XX_FEATURE_UTOPIA | \
+ IXP4XX_FEATURE_NPEB_ETH0 | \
+ IXP4XX_FEATURE_NPEC_ETH | \
+ IXP4XX_FEATURE_RESET_NPEA | \
+ IXP4XX_FEATURE_RESET_NPEB | \
+ IXP4XX_FEATURE_RESET_NPEC | \
+ IXP4XX_FEATURE_PCI | \
+ IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
#define IXP4XX_FEATURE_USB_HOST (1 << 18)
#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
+#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \
+ IXP4XX_FEATURE_ECC_TIMESYNC | \
+ IXP4XX_FEATURE_USB_HOST | \
+ IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
#define IXP4XX_FEATURE_RSA (1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
- IXP4XX_FEATURE_USB_HOST | \
- IXP4XX_FEATURE_NPEA_ETH | \
- IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
- IXP4XX_FEATURE_RSA | \
- IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \
+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
+ IXP4XX_FEATURE_RSA)
#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 92a7e8d..d2aa26f 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -20,7 +20,7 @@
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if ( 1 && mode == 's') {
/* Jump into ROM at address 0 */
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index c73a94d..2523102 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -575,8 +575,8 @@
for (i = 0; i < image->size; i++)
image->data[i] = swab32(image->data[i]);
- if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
- print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+ if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
+ print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
"IXP42x\n");
goto err;
}
@@ -596,7 +596,7 @@
"revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
(image->id >> 8) & 0xFF, image->id & 0xFF);
- if (!cpu_is_ixp46x()) {
+ if (cpu_is_ixp42x()) {
if (!npe->id)
instr_size = NPE_A_42X_INSTR_SIZE;
else
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3600cd9..b5421cc 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,18 @@
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
+config MACH_SHEEVAPLUG
+ bool "Marvell SheevaPlug Reference Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell SheevaPlug Reference Board.
+
+config MACH_TS219
+ bool "QNAP TS-119 and TS-219 Turbo NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-119 and TS-219 Turbo NAS devices.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index b96c55d..8f03c9b 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,5 +1,7 @@
-obj-y += common.o addr-map.o irq.o pcie.o
+obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b3404b7..19b03f6 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -14,6 +14,7 @@
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
@@ -24,6 +25,7 @@
#include <mach/kirkwood.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
+#include <plat/mvsdio.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
@@ -254,7 +256,7 @@
.flags = IORESOURCE_MEM,
};
-void __init kirkwood_rtc_init(void)
+static void __init kirkwood_rtc_init(void)
{
platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
}
@@ -296,6 +298,50 @@
/*****************************************************************************
+ * SD/SDIO/MMC
+ ****************************************************************************/
+static struct resource mvsdio_resources[] = {
+ [0] = {
+ .start = SDIO_PHYS_BASE,
+ .end = SDIO_PHYS_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KIRKWOOD_SDIO,
+ .end = IRQ_KIRKWOOD_SDIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 mvsdio_dmamask = 0xffffffffUL;
+
+static struct platform_device kirkwood_sdio = {
+ .name = "mvsdio",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mvsdio_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mvsdio_resources),
+ .resource = mvsdio_resources,
+};
+
+void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+ if (rev == 0) /* catch all Kirkwood Z0's */
+ mvsdio_data->clock = 100000000;
+ else
+ mvsdio_data->clock = 200000000;
+ mvsdio_data->dram = &kirkwood_mbus_dram_info;
+ kirkwood_sdio.dev.platform_data = mvsdio_data;
+ platform_device_register(&kirkwood_sdio);
+}
+
+
+/*****************************************************************************
* SPI
****************************************************************************/
static struct orion_spi_info kirkwood_spi_plat_data = {
@@ -326,6 +372,45 @@
/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource kirkwood_i2c_resources[] = {
+ {
+ .name = "i2c",
+ .start = I2C_PHYS_BASE,
+ .end = I2C_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c",
+ .start = IRQ_KIRKWOOD_TWSI,
+ .end = IRQ_KIRKWOOD_TWSI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(kirkwood_i2c_resources),
+ .resource = kirkwood_i2c_resources,
+ .dev = {
+ .platform_data = &kirkwood_i2c_pdata,
+ },
+};
+
+void __init kirkwood_i2c_init(void)
+{
+ platform_device_register(&kirkwood_i2c);
+}
+
+
+/*****************************************************************************
* UART0
****************************************************************************/
static struct plat_serial8250_port kirkwood_uart0_data[] = {
@@ -502,7 +587,7 @@
},
};
-void __init kirkwood_xor0_init(void)
+static void __init kirkwood_xor0_init(void)
{
platform_device_register(&kirkwood_xor0_shared);
@@ -600,7 +685,7 @@
},
};
-void __init kirkwood_xor1_init(void)
+static void __init kirkwood_xor1_init(void)
{
platform_device_register(&kirkwood_xor1_shared);
@@ -708,4 +793,9 @@
#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
#endif
+
+ /* internal devices that every board has */
+ kirkwood_rtc_init();
+ kirkwood_xor0_init();
+ kirkwood_xor1_init();
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fe367c1..6ee8840 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -14,6 +14,7 @@
struct dsa_platform_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
+struct mvsdio_platform_data;
/*
* Basic Kirkwood init functions used early by machine-setup.
@@ -33,14 +34,14 @@
void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
void kirkwood_pcie_init(void);
-void kirkwood_rtc_init(void);
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
+extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index a14c294..5505d58 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,18 +11,59 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
+#include <plat/orion_nand.h>
+#include <plat/mvsdio.h>
#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition db88f6281_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource db88f6281_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data db88f6281_nand_data = {
+ .parts = db88f6281_nand_parts,
+ .nr_parts = ARRAY_SIZE(db88f6281_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device db88f6281_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &db88f6281_nand_data,
+ },
+ .resource = &db88f6281_nand_resource,
+ .num_resources = 1,
+};
static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
@@ -32,18 +73,32 @@
.n_ports = 2,
};
+static struct mvsdio_platform_data db88f6281_mvsdio_data = {
+ .gpio_write_protect = 37,
+ .gpio_card_detect = 38,
+};
+
+static unsigned int db88f6281_mpp_config[] __initdata = {
+ MPP37_GPIO,
+ MPP38_GPIO,
+ 0
+};
+
static void __init db88f6281_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
+ kirkwood_mpp_conf(db88f6281_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&db88f6281_ge00_data);
- kirkwood_rtc_init();
kirkwood_sata_init(&db88f6281_sata_data);
kirkwood_uart0_init();
+ kirkwood_sdio_init(&db88f6281_mvsdio_data);
+
+ platform_device_register(&db88f6281_nand_flash);
}
static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index ada480c..38c9868 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -93,6 +93,7 @@
#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034)
#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300)
#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600)
+#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
@@ -116,5 +117,7 @@
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+
#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 8510f6c..23a1914 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -17,7 +17,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
new file mode 100644
index 0000000..63c4493
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-kirkwood/mpp.c
+ *
+ * MPP functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init kirkwood_variant(void)
+{
+ u32 dev, rev;
+
+ kirkwood_pcie_id(&dev, &rev);
+
+ if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+ return MPP_F6281_MASK;
+ if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
+ return MPP_F6192_MASK;
+ if (dev == MV88F6180_DEV_ID)
+ return MPP_F6180_MASK;
+
+ printk(KERN_ERR "MPP setup: unknown kirkwood variant "
+ "(dev %#x rev %#x)\n", dev, rev);
+ return 0;
+}
+
+#define MPP_CTRL(i) (DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS (1 + MPP_MAX/8)
+
+void __init kirkwood_mpp_conf(unsigned int *mpp_list)
+{
+ u32 mpp_ctrl[MPP_NR_REGS];
+ unsigned int variant_mask;
+ int i;
+
+ variant_mask = kirkwood_variant();
+ if (!variant_mask)
+ return;
+
+ printk(KERN_DEBUG "initial MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ mpp_ctrl[i] = readl(MPP_CTRL(i));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+
+ while (*mpp_list) {
+ unsigned int num = MPP_NUM(*mpp_list);
+ unsigned int sel = MPP_SEL(*mpp_list);
+ int shift, gpio_mode;
+
+ if (num > MPP_MAX) {
+ printk(KERN_ERR "kirkwood_mpp_conf: invalid MPP "
+ "number (%u)\n", num);
+ continue;
+ }
+ if (!(*mpp_list & variant_mask)) {
+ printk(KERN_WARNING
+ "kirkwood_mpp_conf: requested MPP%u config "
+ "unavailable on this hardware\n", num);
+ continue;
+ }
+
+ shift = (num & 7) << 2;
+ mpp_ctrl[num / 8] &= ~(0xf << shift);
+ mpp_ctrl[num / 8] |= sel << shift;
+
+ gpio_mode = 0;
+ if (*mpp_list & MPP_INPUT_MASK)
+ gpio_mode |= GPIO_INPUT_OK;
+ if (*mpp_list & MPP_OUTPUT_MASK)
+ gpio_mode |= GPIO_OUTPUT_OK;
+ if (sel != 0)
+ gpio_mode = 0;
+ orion_gpio_set_valid(num, gpio_mode);
+
+ mpp_list++;
+ }
+
+ printk(KERN_DEBUG " final MPP regs:");
+ for (i = 0; i < MPP_NR_REGS; i++) {
+ writel(mpp_ctrl[i], MPP_CTRL(i));
+ printk(" %08x", mpp_ctrl[i]);
+ }
+ printk("\n");
+}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
new file mode 100644
index 0000000..e021a80
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -0,0 +1,303 @@
+/*
+ * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
+ *
+ * Copyright 2009: Marvell Technology Group Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __KIRKWOOD_MPP_H
+#define __KIRKWOOD_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13) | \
+ /* available on F6180 */ ((!!(_F6180)) << 14) | \
+ /* available on F6190 */ ((!!(_F6190)) << 15) | \
+ /* available on F6192 */ ((!!(_F6192)) << 16) | \
+ /* available on F6281 */ ((!!(_F6281)) << 17))
+
+#define MPP_NUM(x) ((x) & 0xff)
+#define MPP_SEL(x) (((x) >> 8) & 0xf)
+
+ /* num sel i o 6180 6190 6192 6281 */
+
+#define MPP_INPUT_MASK MPP( 0, 0x0, 1, 0, 0, 0, 0, 0 )
+#define MPP_OUTPUT_MASK MPP( 0, 0x0, 0, 1, 0, 0, 0, 0 )
+
+#define MPP_F6180_MASK MPP( 0, 0x0, 0, 0, 1, 0, 0, 0 )
+#define MPP_F6190_MASK MPP( 0, 0x0, 0, 0, 0, 1, 0, 0 )
+#define MPP_F6192_MASK MPP( 0, 0x0, 0, 0, 0, 0, 1, 0 )
+#define MPP_F6281_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 1 )
+
+#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1 )
+
+#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1 )
+
+#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP8_TW_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP9_TW_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1 )
+
+#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1 )
+
+#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1 )
+
+#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1 )
+
+#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1 )
+
+#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1 )
+
+#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1 )
+
+#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1 )
+
+#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP20_GE1_0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP20_AUDIO_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1 )
+
+#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP21_GE1_1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP21_AUDIO_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP22_GE1_2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP22_AUDIO_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1 )
+
+#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP23_GE1_3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP23_AUDIO_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1 )
+
+#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP24_TDM_SPI_CS0 DEV( 24, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP24_GE1_4 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP24_AUDIO_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP25_GE1_5 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP25_AUDIO_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP26_GE1_6 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP26_AUDIO_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1 )
+
+#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP27_GE1_7 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AUDIO_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1 )
+
+#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1 )
+#define MPP28_GE1_8 MPP( 28, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AUDIO_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1 )
+
+#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1 )
+#define MPP29_GE1_9 MPP( 29, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1 )
+#define MPP30_GE1_10 MPP( 30, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1 )
+#define MPP31_GE1_11 MPP( 31, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1 )
+#define MPP32_GE1_12 MPP( 32, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP33_GPIO MPP( 33, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP33_GE1_13 MPP( 33, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP34_GE1_14 MPP( 34, 0x3, 0, 0, 0, 1, 1, 1 )
+
+#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1 )
+#define MPP35_GE1_15 MPP( 35, 0x3, 0, 0, 0, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1 )
+
+#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP36_AUDIO_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP37_AUDIO_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP38_AUDIO_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP39_AUDIO_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP40_AUDIO_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1 )
+#define MPP41_AUDIO_I2SLRC MPP( 41, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP42_AUDIO_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1 )
+
+#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1 )
+#define MPP43_AUDIO_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1 )
+#define MPP44_AUDIO_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1 )
+
+#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1 )
+
+#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1 )
+
+#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1 )
+
+#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 )
+
+#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1 )
+
+#define MPP_MAX 49
+
+void kirkwood_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index b1d1a87..2f0e4ef 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,11 +11,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/flash.h>
@@ -23,7 +20,6 @@
#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
@@ -61,14 +57,11 @@
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6192_ge00_data);
- kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6192_sata_data);
spi_register_board_info(rd88F6192_spi_slave_info,
ARRAY_SIZE(rd88F6192_spi_slave_info));
kirkwood_spi_init();
kirkwood_uart0_init();
- kirkwood_xor0_init();
- kirkwood_xor1_init();
}
static int __init rd88f6192_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9a0e905..c3deea5 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -11,21 +11,20 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/pci.h>
#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
-#include <linux/timer.h>
+#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
#include "common.h"
+#include "mpp.h"
static struct mtd_partition rd88f6281_nand_parts[] = {
{
@@ -91,6 +90,15 @@
.n_ports = 2,
};
+static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
+ .gpio_card_detect = 28,
+};
+
+static unsigned int rd88f6281_mpp_config[] __initdata = {
+ MPP28_GPIO,
+ 0
+};
+
static void __init rd88f6281_init(void)
{
u32 dev, rev;
@@ -99,6 +107,7 @@
* Basic setup. Needs to be called early.
*/
kirkwood_init();
+ kirkwood_mpp_conf(rd88f6281_mpp_config);
kirkwood_ehci_init();
@@ -112,8 +121,8 @@
}
kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
- kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6281_sata_data);
+ kirkwood_sdio_init(&rd88f6281_mvsdio_data);
kirkwood_uart0_init();
platform_device_register(&rd88f6281_nand_flash);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
new file mode 100644
index 0000000..831e4a5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -0,0 +1,136 @@
+/*
+ * arch/arm/mach-kirkwood/sheevaplug-setup.c
+ *
+ * Marvell SheevaPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition sheevaplug_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_4M
+ }, {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource sheevaplug_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data sheevaplug_nand_data = {
+ .parts = sheevaplug_nand_parts,
+ .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device sheevaplug_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &sheevaplug_nand_data,
+ },
+ .resource = &sheevaplug_nand_resource,
+ .num_resources = 1,
+};
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
+ // unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led sheevaplug_led_pins[] = {
+ {
+ .name = "plug:green:health",
+ .default_trigger = "default-on",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data sheevaplug_led_data = {
+ .leds = sheevaplug_led_pins,
+ .num_leds = ARRAY_SIZE(sheevaplug_led_pins),
+};
+
+static struct platform_device sheevaplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &sheevaplug_led_data,
+ }
+};
+
+static unsigned int sheevaplug_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP49_GPIO, /* LED */
+ 0
+};
+
+static void __init sheevaplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+ kirkwood_uart0_init();
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&sheevaplug_ge00_data);
+ kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+ platform_device_register(&sheevaplug_nand_flash);
+ platform_device_register(&sheevaplug_leds);
+}
+
+MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
+ /* Maintainer: shadi Ammouri <shadi@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = sheevaplug_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
new file mode 100644
index 0000000..dda5743
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -0,0 +1,220 @@
+/*
+ *
+ * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * the QNAP firmware.
+ * Layout as used by QNAP:
+ * 0x00000000-0x00080000 : "U-Boot"
+ * 0x00200000-0x00400000 : "Kernel"
+ * 0x00400000-0x00d00000 : "RootFS"
+ * 0x00d00000-0x01000000 : "RootFS2"
+ * 0x00080000-0x000c0000 : "U-Boot Config"
+ * 0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_ts219_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00900000,
+ .offset = 0x00400000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00300000,
+ .offset = 0x00d00000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00040000,
+ .offset = 0x00080000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00140000,
+ .offset = 0x000c0000,
+ },
+};
+
+static const struct flash_platform_data qnap_ts219_flash = {
+ .type = "m25p128",
+ .name = "spi_flash",
+ .parts = qnap_ts219_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts219_partitions),
+};
+
+static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &qnap_ts219_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 15,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 16,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+ .buttons = qnap_ts219_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts219_button_data,
+ }
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_GPIO, /* USB Copy button */
+ MPP16_GPIO, /* Reset button */
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP22_SATA1_PRESENTn,
+ MPP23_SATA0_PRESENTn,
+ 0
+};
+
+
+/*****************************************************************************
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_ts219_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
+static void __init qnap_ts219_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
+ spi_register_board_info(qnap_ts219_spi_slave_info,
+ ARRAY_SIZE(qnap_ts219_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+ kirkwood_ge00_init(&qnap_ts219_ge00_data);
+ kirkwood_sata_init(&qnap_ts219_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&qnap_ts219_button_device);
+
+ pm_power_off = qnap_ts219_power_off;
+
+}
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts219_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index 2754daa..fe0c82e 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -14,6 +14,12 @@
Say 'Y' here if you want your kernel to run on the D-Link
DSM-320 Wireless Media Player.
+config MACH_ACS5K
+ bool "Brivo Systems LLC, ACS-5000 Master board"
+ help
+ say 'Y' here if you want your kernel to run on the Brivo
+ Systems LLC, ACS-5000 Master board.
+
endmenu
endif
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index f735d2c..7e3e816 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -17,3 +17,4 @@
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
+obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
new file mode 100644
index 0000000..9e3e5a6
--- /dev/null
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -0,0 +1,233 @@
+/*
+ * arch/arm/mach-ks8695/board-acs5k.c
+ *
+ * Brivo Systems LLC, ACS-5000 Master Board
+ *
+ * Copyright 2008 Simtec Electronics
+ * Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/devices.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
+ .sda_pin = 4,
+ .scl_pin = 5,
+ .udelay = 10,
+};
+
+static struct platform_device acs5k_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &acs5k_i2c_device_platdata,
+ },
+};
+
+static int acs5k_pca9555_setup(struct i2c_client *client,
+ unsigned gpio_base, unsigned ngpio,
+ void *context)
+{
+ static int acs5k_gpio_value[] = {
+ -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
+ };
+ int n;
+
+ for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
+ gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
+ if (acs5k_gpio_value[n] < 0)
+ gpio_direction_input(gpio_base + n);
+ else
+ gpio_direction_output(gpio_base + n,
+ acs5k_gpio_value[n]);
+ gpio_export(gpio_base + n, 0); /* Export, direction locked down */
+ }
+
+ return 0;
+}
+
+static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
+ .gpio_base = 16, /* Start directly after the CPU's GPIO */
+ .invert = 0, /* Do not invert */
+ .setup = acs5k_pca9555_setup,
+};
+
+static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+ {
+ I2C_BOARD_INFO("pca9555", 0x20),
+ .platform_data = &acs5k_i2c_pca9555_platdata,
+ },
+};
+
+static void __devinit acs5k_i2c_init(void)
+{
+ /* The gpio interface */
+ platform_device_register(&acs5k_i2c_device);
+ /* I2C devices */
+ i2c_register_board_info(0, acs5k_i2c_devs,
+ ARRAY_SIZE(acs5k_i2c_devs));
+}
+
+static struct mtd_partition acs5k_nor_partitions[] = {
+ [0] = {
+ .name = "Boot Agent and config",
+ .size = SZ_256K,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Kernel",
+ .size = SZ_1M,
+ .offset = SZ_256K,
+ },
+ [2] = {
+ .name = "SquashFS1",
+ .size = SZ_2M,
+ .offset = SZ_256K + SZ_1M,
+ },
+ [3] = {
+ .name = "SquashFS2",
+ .size = SZ_4M + SZ_2M,
+ .offset = SZ_256K + SZ_1M + SZ_2M,
+ },
+ [4] = {
+ .name = "Data",
+ .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
+ .offset = SZ_256K + SZ_8M + SZ_1M,
+ }
+};
+
+static struct physmap_flash_data acs5k_nor_pdata = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(acs5k_nor_partitions),
+ .parts = acs5k_nor_partitions,
+};
+
+static struct resource acs5k_nor_resource[] = {
+ [0] = {
+ .start = SZ_32M, /* We expect the bootloader to map
+ * the flash here.
+ */
+ .end = SZ_32M + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SZ_32M + SZ_16M,
+ .end = SZ_32M + SZ_32M - SZ_256K - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device acs5k_device_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(acs5k_nor_resource),
+ .resource = acs5k_nor_resource,
+ .dev = {
+ .platform_data = &acs5k_nor_pdata,
+ },
+};
+
+static void __init acs5k_register_nor(void)
+{
+ int ret;
+
+ if (acs5k_nor_partitions[0].mask_flags == 0)
+ printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
+
+ ret = platform_device_register(&acs5k_device_nor);
+ if (ret < 0)
+ printk(KERN_ERR "failed to register physmap-flash device\n");
+}
+
+static int __init acs5k_protection_setup(char *s)
+{
+ /* We can't allocate anything here but we should be able
+ * to trivially parse s and decide if we can protect the
+ * bootloader partition or not
+ */
+ if (strcmp(s, "no") == 0)
+ acs5k_nor_partitions[0].mask_flags = 0;
+
+ return 1;
+}
+
+__setup("protect_bootloader=", acs5k_protection_setup);
+
+static void __init acs5k_init_gpio(void)
+{
+ int i;
+
+ ks8695_register_gpios();
+ for (i = 0; i < 4; ++i)
+ gpio_request(i, "ACS5K IRQ");
+ gpio_request(7, "ACS5K KS_FRDY");
+ for (i = 8; i < 16; ++i)
+ gpio_request(i, "ACS5K Unused");
+
+ gpio_request(3, "ACS5K CAN Control");
+ gpio_request(6, "ACS5K Heartbeat");
+ gpio_direction_output(3, 1); /* Default CAN_RESET high */
+ gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
+ gpio_export(3, 0); /* export CAN_RESET as output only */
+ gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
+}
+
+static void __init acs5k_init(void)
+{
+ acs5k_init_gpio();
+
+ /* Network device */
+ ks8695_add_device_lan(); /* eth0 = LAN */
+ ks8695_add_device_wan(); /* ethX = WAN */
+
+ /* NOR devices */
+ acs5k_register_nor();
+
+ /* I2C bus */
+ acs5k_i2c_init();
+}
+
+MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
+ /* Maintainer: Simtec Electronics. */
+ .phys_io = KS8695_IO_PA,
+ .io_pg_offst = (KS8695_IO_VA >> 18) & 0xfffc,
+ .boot_params = KS8695_SDRAM_PA + 0x100,
+ .map_io = ks8695_map_io,
+ .init_irq = ks8695_init_irq,
+ .init_machine = acs5k_init,
+ .timer = &ks8695_timer,
+MACHINE_END
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 6d5887c..76e5308 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -35,7 +35,11 @@
__phys_to_virt(x) : __bus_to_virt(x)); })
#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
+#define __arch_page_to_dma(dev, x) \
+ ({ dma_addr_t __dma = page_to_phys(page); \
+ if (!is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
+ __dma; })
#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index 5a9b032..fb1dda9 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -27,7 +27,7 @@
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
unsigned int reg;
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
index 5272abe..e0dd3b6 100644
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -19,7 +19,7 @@
*(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
cpu_reset(0);
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
index fa46bb1e..45a56d3 100644
--- a/arch/arm/mach-lh7a40x/include/mach/system.h
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -13,7 +13,7 @@
cpu_do_idle ();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset (0);
}
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
index 8db1147..c1de36f 100644
--- a/arch/arm/mach-loki/include/mach/system.h
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -17,7 +17,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
new file mode 100644
index 0000000..c6a564f
--- /dev/null
+++ b/arch/arm/mach-mmp/Kconfig
@@ -0,0 +1,47 @@
+if ARCH_MMP
+
+menu "Marvell PXA168/910 Implmentations"
+
+config MACH_ASPENITE
+ bool "Marvell's PXA168 Aspenite Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Aspenite Development Board.
+
+config MACH_ZYLONITE2
+ bool "Marvell's PXA168 Zylonite2 Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Zylonite2 Development Board.
+
+config MACH_TAVOREVB
+ bool "Marvell's PXA910 TavorEVB Development Board"
+ select CPU_PXA910
+ help
+ Say 'Y' here if you want to support the Marvell PXA910-based
+ TavorEVB Development Board.
+
+config MACH_TTC_DKB
+ bool "Marvell's PXA910 TavorEVB Development Board"
+ select CPU_PXA910
+ help
+ Say 'Y' here if you want to support the Marvell PXA910-based
+ TTC_DKB Development Board.
+
+endmenu
+
+config CPU_PXA168
+ bool
+ select CPU_MOHAWK
+ help
+ Select code specific to PXA168
+
+config CPU_PXA910
+ bool
+ select CPU_MOHAWK
+ help
+ Select code specific to PXA910
+
+endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
new file mode 100644
index 0000000..6883e65
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for Marvell's PXA168 processors line
+#
+
+obj-y += common.o clock.o devices.o irq.o time.o
+
+# SoC support
+obj-$(CONFIG_CPU_PXA168) += pxa168.o
+obj-$(CONFIG_CPU_PXA910) += pxa910.o
+
+# board support
+obj-$(CONFIG_MACH_ASPENITE) += aspenite.o
+obj-$(CONFIG_MACH_ZYLONITE2) += aspenite.o
+obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
new file mode 100644
index 0000000..574a4aa
--- /dev/null
+++ b/arch/arm/mach-mmp/Makefile.boot
@@ -0,0 +1 @@
+ zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
new file mode 100644
index 0000000..4562452
--- /dev/null
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/arm/mach-mmp/aspenite.c
+ *
+ * Support for the Marvell PXA168-based Aspenite and Zylonite2
+ * Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long common_pin_config[] __initdata = {
+ /* Data Flash Interface */
+ GPIO0_DFI_D15,
+ GPIO1_DFI_D14,
+ GPIO2_DFI_D13,
+ GPIO3_DFI_D12,
+ GPIO4_DFI_D11,
+ GPIO5_DFI_D10,
+ GPIO6_DFI_D9,
+ GPIO7_DFI_D8,
+ GPIO8_DFI_D7,
+ GPIO9_DFI_D6,
+ GPIO10_DFI_D5,
+ GPIO11_DFI_D4,
+ GPIO12_DFI_D3,
+ GPIO13_DFI_D2,
+ GPIO14_DFI_D1,
+ GPIO15_DFI_D0,
+
+ /* Static Memory Controller */
+ GPIO18_SMC_nCS0,
+ GPIO34_SMC_nCS1,
+ GPIO23_SMC_nLUA,
+ GPIO25_SMC_nLLA,
+ GPIO28_SMC_RDY,
+ GPIO29_SMC_SCLK,
+ GPIO35_SMC_BE1,
+ GPIO36_SMC_BE2,
+ GPIO27_GPIO, /* Ethernet IRQ */
+
+ /* UART1 */
+ GPIO107_UART1_RXD,
+ GPIO108_UART1_TXD,
+};
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC_CS1_PHYS_BASE + 0x300,
+ .end = SMC_CS1_PHYS_BASE + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(27),
+ .end = gpio_to_irq(27),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void __init common_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+ /* on-chip devices */
+ pxa168_add_uart(1);
+
+ /* off-chip devices */
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = common_init,
+MACHINE_END
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = common_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
new file mode 100644
index 0000000..2d9cc5a
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/mach-mmp/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-apbc.h>
+#include "clock.h"
+
+static void apbc_clk_enable(struct clk *clk)
+{
+ uint32_t clk_rst;
+
+ clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
+ __raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void apbc_clk_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apbc_clk_ops = {
+ .enable = apbc_clk_enable,
+ .disable = apbc_clk_disable,
+};
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ clk->ops->enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ clk->ops->disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ if (clk->ops->getrate)
+ rate = clk->ops->getrate(clk);
+ else
+ rate = clk->rate;
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
new file mode 100644
index 0000000..ed967e7
--- /dev/null
+++ b/arch/arm/mach-mmp/clock.h
@@ -0,0 +1,71 @@
+/*
+ * linux/arch/arm/mach-mmp/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/clkdev.h>
+
+struct clkops {
+ void (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ unsigned long (*getrate)(struct clk *);
+};
+
+struct clk {
+ const struct clkops *ops;
+
+ void __iomem *clk_rst; /* clock reset control register */
+ int fnclksel; /* functional clock select (APBC) */
+ uint32_t enable_val; /* value for clock enable (APMU) */
+ unsigned long rate;
+ int enabled;
+};
+
+extern struct clkops apbc_clk_ops;
+
+#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APBC_##_reg, \
+ .fnclksel = _fnclksel, \
+ .rate = _rate, \
+ .ops = &apbc_clk_ops, \
+}
+
+#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APBC_##_reg, \
+ .fnclksel = _fnclksel, \
+ .rate = _rate, \
+ .ops = _ops, \
+}
+
+#define APMU_CLK(_name, _reg, _eval, _rate) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APMU_##_reg, \
+ .enable_val = _eval, \
+ .rate = _rate, \
+ .ops = &apmu_clk_ops, \
+}
+
+#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \
+struct clk clk_##_name = { \
+ .clk_rst = (void __iomem *)APMU_##_reg, \
+ .enable_val = _eval, \
+ .rate = _rate, \
+ .ops = _ops, \
+}
+
+#define INIT_CLKREG(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
+extern struct clk clk_pxa168_gpio;
+extern struct clk clk_pxa168_timers;
+
+extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
new file mode 100644
index 0000000..e1e66c1
--- /dev/null
+++ b/arch/arm/mach-mmp/common.c
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-mmp/common.c
+ *
+ * Code common to PXA168 processor lines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+
+static struct map_desc standard_io_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(APB_PHYS_BASE),
+ .virtual = APB_VIRT_BASE,
+ .length = APB_PHYS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .pfn = __phys_to_pfn(AXI_PHYS_BASE),
+ .virtual = AXI_VIRT_BASE,
+ .length = AXI_PHYS_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init pxa_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
new file mode 100644
index 0000000..c33fbbc
--- /dev/null
+++ b/arch/arm/mach-mmp/common.h
@@ -0,0 +1,13 @@
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+struct sys_timer;
+
+extern void timer_init(int irq);
+
+extern struct sys_timer pxa168_timer;
+extern struct sys_timer pxa910_timer;
+extern void __init pxa168_init_irq(void);
+extern void __init pxa910_init_irq(void);
+
+extern void __init icu_init_irq(void);
+extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
new file mode 100644
index 0000000..191d9de
--- /dev/null
+++ b/arch/arm/mach-mmp/devices.c
@@ -0,0 +1,69 @@
+/*
+ * linux/arch/arm/mach-mmp/devices.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/devices.h>
+
+int __init pxa_register_device(struct pxa_device_desc *desc,
+ void *data, size_t size)
+{
+ struct platform_device *pdev;
+ struct resource res[2 + MAX_RESOURCE_DMA];
+ int i, ret = 0, nres = 0;
+
+ pdev = platform_device_alloc(desc->drv_name, desc->id);
+ if (pdev == NULL)
+ return -ENOMEM;
+
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ memset(res, 0, sizeof(res));
+
+ if (desc->start != -1ul && desc->size > 0) {
+ res[nres].start = desc->start;
+ res[nres].end = desc->start + desc->size - 1;
+ res[nres].flags = IORESOURCE_MEM;
+ nres++;
+ }
+
+ if (desc->irq != NO_IRQ) {
+ res[nres].start = desc->irq;
+ res[nres].end = desc->irq;
+ res[nres].flags = IORESOURCE_IRQ;
+ nres++;
+ }
+
+ for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
+ if (desc->dma[i] == 0)
+ break;
+
+ res[nres].start = desc->dma[i];
+ res[nres].end = desc->dma[i];
+ res[nres].flags = IORESOURCE_DMA;
+ }
+
+ ret = platform_device_add_resources(pdev, res, nres);
+ if (ret) {
+ platform_device_put(pdev);
+ return ret;
+ }
+
+ if (data && size) {
+ ret = platform_device_add_data(pdev, data, size);
+ if (ret) {
+ platform_device_put(pdev);
+ return ret;
+ }
+ }
+
+ return platform_device_add(pdev);
+}
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
new file mode 100644
index 0000000..3254089
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/addr-map.h
+ *
+ * Common address map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/* APB - Application Subsystem Peripheral Bus
+ *
+ * NOTE: the DMA controller registers are actually on the AXI fabric #1
+ * slave port to AHB/APB bridge, due to its close relationship to those
+ * peripherals on APB, let's count it into the ABP mapping area.
+ */
+#define APB_PHYS_BASE 0xd4000000
+#define APB_VIRT_BASE 0xfe000000
+#define APB_PHYS_SIZE 0x00200000
+
+#define AXI_PHYS_BASE 0xd4200000
+#define AXI_VIRT_BASE 0xfe200000
+#define AXI_PHYS_SIZE 0x00200000
+
+/* Static Memory Controller - Chip Select 0 and 1 */
+#define SMC_CS0_PHYS_BASE 0x80000000
+#define SMC_CS0_PHYS_SIZE 0x10000000
+#define SMC_CS1_PHYS_BASE 0x90000000
+#define SMC_CS1_PHYS_SIZE 0x10000000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h
new file mode 100644
index 0000000..2fb354e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
new file mode 100644
index 0000000..25e797b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_CPUTYPE_H
+#define __ASM_MACH_CPUTYPE_H
+
+#include <asm/cputype.h>
+
+/*
+ * CPU Stepping OLD_ID CPU_ID CHIP_ID
+ *
+ * PXA168 A0 0x41159263 0x56158400 0x00A0A333
+ * PXA910 Y0 0x41159262 0x56158000 0x00F0C910
+ */
+
+#ifdef CONFIG_CPU_PXA168
+# define __cpu_is_pxa168(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+#else
+# define __cpu_is_pxa168(id) (0)
+#endif
+
+#ifdef CONFIG_CPU_PXA910
+# define __cpu_is_pxa910(id) \
+ ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+#else
+# define __cpu_is_pxa910(id) (0)
+#endif
+
+#define cpu_is_pxa168() ({ __cpu_is_pxa168(read_cpuid_id()); })
+#define cpu_is_pxa910() ({ __cpu_is_pxa910(read_cpuid_id()); })
+
+#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
new file mode 100644
index 0000000..a850f87
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-mmp/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copied from arch/arm/mach-pxa/include/mach/debug.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/addr-map.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =APB_PHYS_BASE @ physical
+ ldrne \rx, =APB_VIRT_BASE @ virtual
+ orr \rx, \rx, #0x00017000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
new file mode 100644
index 0000000..2458539
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -0,0 +1,37 @@
+#include <linux/types.h>
+
+#define MAX_RESOURCE_DMA 2
+
+/* structure for describing the on-chip devices */
+struct pxa_device_desc {
+ const char *dev_name;
+ const char *drv_name;
+ int id;
+ int irq;
+ unsigned long start;
+ unsigned long size;
+ int dma[MAX_RESOURCE_DMA];
+};
+
+#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc pxa168_device_##_name __initdata = { \
+ .dev_name = "pxa168-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_PXA168_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+};
+
+#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \
+struct pxa_device_desc pxa910_device_##_name __initdata = { \
+ .dev_name = "pxa910-" #_name, \
+ .drv_name = _drv, \
+ .id = _id, \
+ .irq = IRQ_PXA910_##_irq, \
+ .start = _start, \
+ .size = _size, \
+ .dma = { _dma }, \
+};
+extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
new file mode 100644
index 0000000..1d69145
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/dma.h
@@ -0,0 +1,13 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/dma.h
+ */
+
+#ifndef __ASM_MACH_DMA_H
+#define __ASM_MACH_DMA_H
+
+#include <mach/addr-map.h>
+
+#define DMAC_REGS_VIRT (APB_VIRT_BASE + 0x00000)
+
+#include <plat/dma.h>
+#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d3cd35
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-icu.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =ICU_AP_IRQ_SEL_INT_NUM
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \tmp, [\base, #0]
+ and \irqnr, \tmp, #0x3f
+ tst \tmp, #(1 << 6)
+ .endm
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
new file mode 100644
index 0000000..ab26d13
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_MACH_GPIO_H
+#define __ASM_MACH_GPIO_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+#include <asm-generic/gpio.h>
+
+#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO (128)
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
+#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
+
+
+#define __gpio_is_inverted(gpio) (0)
+#define __gpio_is_occupied(gpio) (0)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio.h>
+#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
new file mode 100644
index 0000000..99264a5
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/hardware.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/io.h b/arch/arm/mach-mmp/include/mach/io.h
new file mode 100644
index 0000000..e7adf3d
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/io.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/io.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
new file mode 100644
index 0000000..e83e45e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -0,0 +1,119 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+/*
+ * Interrupt numbers for PXA168
+ */
+#define IRQ_PXA168_NONE (-1)
+#define IRQ_PXA168_SSP3 0
+#define IRQ_PXA168_SSP2 1
+#define IRQ_PXA168_SSP1 2
+#define IRQ_PXA168_SSP0 3
+#define IRQ_PXA168_PMIC_INT 4
+#define IRQ_PXA168_RTC_INT 5
+#define IRQ_PXA168_RTC_ALARM 6
+#define IRQ_PXA168_TWSI0 7
+#define IRQ_PXA168_GPU 8
+#define IRQ_PXA168_KEYPAD 9
+#define IRQ_PXA168_ONEWIRE 12
+#define IRQ_PXA168_TIMER1 13
+#define IRQ_PXA168_TIMER2 14
+#define IRQ_PXA168_TIMER3 15
+#define IRQ_PXA168_CMU 16
+#define IRQ_PXA168_SSP4 17
+#define IRQ_PXA168_MSP_WAKEUP 19
+#define IRQ_PXA168_CF_WAKEUP 20
+#define IRQ_PXA168_XD_WAKEUP 21
+#define IRQ_PXA168_MFU 22
+#define IRQ_PXA168_MSP 23
+#define IRQ_PXA168_CF 24
+#define IRQ_PXA168_XD 25
+#define IRQ_PXA168_DDR_INT 26
+#define IRQ_PXA168_UART1 27
+#define IRQ_PXA168_UART2 28
+#define IRQ_PXA168_WDT 35
+#define IRQ_PXA168_FRQ_CHANGE 38
+#define IRQ_PXA168_SDH1 39
+#define IRQ_PXA168_SDH2 40
+#define IRQ_PXA168_LCD 41
+#define IRQ_PXA168_CI 42
+#define IRQ_PXA168_USB1 44
+#define IRQ_PXA168_NAND 45
+#define IRQ_PXA168_HIFI_DMA 46
+#define IRQ_PXA168_DMA_INT0 47
+#define IRQ_PXA168_DMA_INT1 48
+#define IRQ_PXA168_GPIOX 49
+#define IRQ_PXA168_USB2 51
+#define IRQ_PXA168_AC97 57
+#define IRQ_PXA168_TWSI1 58
+#define IRQ_PXA168_PMU 60
+#define IRQ_PXA168_SM_INT 63
+
+/*
+ * Interrupt numbers for PXA910
+ */
+#define IRQ_PXA910_AIRQ 0
+#define IRQ_PXA910_SSP3 1
+#define IRQ_PXA910_SSP2 2
+#define IRQ_PXA910_SSP1 3
+#define IRQ_PXA910_PMIC_INT 4
+#define IRQ_PXA910_RTC_INT 5
+#define IRQ_PXA910_RTC_ALARM 6
+#define IRQ_PXA910_TWSI0 7
+#define IRQ_PXA910_GPU 8
+#define IRQ_PXA910_KEYPAD 9
+#define IRQ_PXA910_ROTARY 10
+#define IRQ_PXA910_TRACKBALL 11
+#define IRQ_PXA910_ONEWIRE 12
+#define IRQ_PXA910_AP1_TIMER1 13
+#define IRQ_PXA910_AP1_TIMER2 14
+#define IRQ_PXA910_AP1_TIMER3 15
+#define IRQ_PXA910_IPC_AP0 16
+#define IRQ_PXA910_IPC_AP1 17
+#define IRQ_PXA910_IPC_AP2 18
+#define IRQ_PXA910_IPC_AP3 19
+#define IRQ_PXA910_IPC_AP4 20
+#define IRQ_PXA910_IPC_CP0 21
+#define IRQ_PXA910_IPC_CP1 22
+#define IRQ_PXA910_IPC_CP2 23
+#define IRQ_PXA910_IPC_CP3 24
+#define IRQ_PXA910_IPC_CP4 25
+#define IRQ_PXA910_L2_DDR 26
+#define IRQ_PXA910_UART2 27
+#define IRQ_PXA910_UART3 28
+#define IRQ_PXA910_AP2_TIMER1 29
+#define IRQ_PXA910_AP2_TIMER2 30
+#define IRQ_PXA910_CP2_TIMER1 31
+#define IRQ_PXA910_CP2_TIMER2 32
+#define IRQ_PXA910_CP2_TIMER3 33
+#define IRQ_PXA910_GSSP 34
+#define IRQ_PXA910_CP2_WDT 35
+#define IRQ_PXA910_MAIN_PMU 36
+#define IRQ_PXA910_CP_FREQ_CHG 37
+#define IRQ_PXA910_AP_FREQ_CHG 38
+#define IRQ_PXA910_MMC 39
+#define IRQ_PXA910_AEU 40
+#define IRQ_PXA910_LCD 41
+#define IRQ_PXA910_CCIC 42
+#define IRQ_PXA910_IRE 43
+#define IRQ_PXA910_USB1 44
+#define IRQ_PXA910_NAND 45
+#define IRQ_PXA910_HIFI_DMA 46
+#define IRQ_PXA910_DMA_INT0 47
+#define IRQ_PXA910_DMA_INT1 48
+#define IRQ_PXA910_AP_GPIO 49
+#define IRQ_PXA910_AP2_TIMER3 50
+#define IRQ_PXA910_USB2 51
+#define IRQ_PXA910_TWSI1 54
+#define IRQ_PXA910_CP_GPIO 55
+#define IRQ_PXA910_UART1 59 /* Slow UART */
+#define IRQ_PXA910_AP_PMU 60
+#define IRQ_PXA910_SM_INT 63 /* from PinMux */
+
+#define IRQ_GPIO_START 64
+#define IRQ_GPIO_NUM 128
+#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
+
+#define NR_IRQS (IRQ_GPIO_START + IRQ_GPIO_NUM)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
new file mode 100644
index 0000000..bdb21d7
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
new file mode 100644
index 0000000..d0bdb6e
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_MACH_MFP_PXA168_H
+#define __ASM_MACH_MFP_PXA168_H
+
+#include <mach/mfp.h>
+
+/* GPIO */
+#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
+#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
+#define GPIO2_GPIO MFP_CFG(GPIO2, AF5)
+#define GPIO3_GPIO MFP_CFG(GPIO3, AF5)
+#define GPIO4_GPIO MFP_CFG(GPIO4, AF5)
+#define GPIO5_GPIO MFP_CFG(GPIO5, AF5)
+#define GPIO6_GPIO MFP_CFG(GPIO6, AF5)
+#define GPIO7_GPIO MFP_CFG(GPIO7, AF5)
+#define GPIO8_GPIO MFP_CFG(GPIO8, AF5)
+#define GPIO9_GPIO MFP_CFG(GPIO9, AF5)
+#define GPIO10_GPIO MFP_CFG(GPIO10, AF5)
+#define GPIO11_GPIO MFP_CFG(GPIO11, AF5)
+#define GPIO12_GPIO MFP_CFG(GPIO12, AF5)
+#define GPIO13_GPIO MFP_CFG(GPIO13, AF5)
+#define GPIO14_GPIO MFP_CFG(GPIO14, AF5)
+#define GPIO15_GPIO MFP_CFG(GPIO15, AF5)
+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO MFP_CFG(GPIO17, AF5)
+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO MFP_CFG(GPIO19, AF5)
+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO MFP_CFG(GPIO21, AF5)
+#define GPIO22_GPIO MFP_CFG(GPIO22, AF5)
+#define GPIO23_GPIO MFP_CFG(GPIO23, AF5)
+#define GPIO24_GPIO MFP_CFG(GPIO24, AF5)
+#define GPIO25_GPIO MFP_CFG(GPIO25, AF5)
+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO MFP_CFG(GPIO27, AF5)
+#define GPIO28_GPIO MFP_CFG(GPIO28, AF5)
+#define GPIO29_GPIO MFP_CFG(GPIO29, AF5)
+#define GPIO30_GPIO MFP_CFG(GPIO30, AF5)
+#define GPIO31_GPIO MFP_CFG(GPIO31, AF5)
+#define GPIO32_GPIO MFP_CFG(GPIO32, AF5)
+#define GPIO33_GPIO MFP_CFG(GPIO33, AF5)
+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0)
+
+/* DFI */
+#define GPIO0_DFI_D15 MFP_CFG(GPIO0, AF0)
+#define GPIO1_DFI_D14 MFP_CFG(GPIO1, AF0)
+#define GPIO2_DFI_D13 MFP_CFG(GPIO2, AF0)
+#define GPIO3_DFI_D12 MFP_CFG(GPIO3, AF0)
+#define GPIO4_DFI_D11 MFP_CFG(GPIO4, AF0)
+#define GPIO5_DFI_D10 MFP_CFG(GPIO5, AF0)
+#define GPIO6_DFI_D9 MFP_CFG(GPIO6, AF0)
+#define GPIO7_DFI_D8 MFP_CFG(GPIO7, AF0)
+#define GPIO8_DFI_D7 MFP_CFG(GPIO8, AF0)
+#define GPIO9_DFI_D6 MFP_CFG(GPIO9, AF0)
+#define GPIO10_DFI_D5 MFP_CFG(GPIO10, AF0)
+#define GPIO11_DFI_D4 MFP_CFG(GPIO11, AF0)
+#define GPIO12_DFI_D3 MFP_CFG(GPIO12, AF0)
+#define GPIO13_DFI_D2 MFP_CFG(GPIO13, AF0)
+#define GPIO14_DFI_D1 MFP_CFG(GPIO14, AF0)
+#define GPIO15_DFI_D0 MFP_CFG(GPIO15, AF0)
+
+#define GPIO30_DFI_ADDR0 MFP_CFG(GPIO30, AF0)
+#define GPIO31_DFI_ADDR1 MFP_CFG(GPIO31, AF0)
+#define GPIO32_DFI_ADDR2 MFP_CFG(GPIO32, AF0)
+#define GPIO33_DFI_ADDR3 MFP_CFG(GPIO33, AF0)
+
+/* NAND */
+#define GPIO16_ND_nCS0 MFP_CFG(GPIO16, AF1)
+#define GPIO17_ND_nWE MFP_CFG(GPIO17, AF0)
+#define GPIO21_ND_ALE MFP_CFG(GPIO21, AF0)
+#define GPIO22_ND_CLE MFP_CFG(GPIO22, AF0)
+#define GPIO24_ND_nRE MFP_CFG(GPIO24, AF0)
+#define GPIO26_ND_RnB1 MFP_CFG(GPIO26, AF1)
+#define GPIO27_ND_RnB2 MFP_CFG(GPIO27, AF1)
+
+/* Static Memory Controller */
+#define GPIO18_SMC_nCS0 MFP_CFG(GPIO18, AF3)
+#define GPIO18_SMC_nCS1 MFP_CFG(GPIO18, AF2)
+#define GPIO16_SMC_nCS0 MFP_CFG(GPIO16, AF2)
+#define GPIO16_SMC_nCS1 MFP_CFG(GPIO16, AF3)
+#define GPIO19_SMC_nCS0 MFP_CFG(GPIO19, AF0)
+#define GPIO20_SMC_nCS1 MFP_CFG(GPIO20, AF2)
+#define GPIO23_SMC_nLUA MFP_CFG(GPIO23, AF0)
+#define GPIO25_SMC_nLLA MFP_CFG(GPIO25, AF0)
+#define GPIO27_SMC_IRQ MFP_CFG(GPIO27, AF0)
+#define GPIO28_SMC_RDY MFP_CFG(GPIO28, AF0)
+#define GPIO29_SMC_SCLK MFP_CFG(GPIO29, AF0)
+#define GPIO34_SMC_nCS1 MFP_CFG(GPIO34, AF2)
+#define GPIO35_SMC_BE1 MFP_CFG(GPIO35, AF2)
+#define GPIO36_SMC_BE2 MFP_CFG(GPIO36, AF2)
+
+/* Compact Flash */
+#define GPIO19_CF_nCE1 MFP_CFG(GPIO19, AF3)
+#define GPIO20_CF_nCE2 MFP_CFG(GPIO20, AF3)
+#define GPIO23_CF_nALE MFP_CFG(GPIO23, AF3)
+#define GPIO25_CF_nRESET MFP_CFG(GPIO25, AF3)
+#define GPIO28_CF_RDY MFP_CFG(GPIO28, AF3)
+#define GPIO29_CF_STSCH MFP_CFG(GPIO29, AF3)
+#define GPIO30_CF_nREG MFP_CFG(GPIO30, AF3)
+#define GPIO31_CF_nIOIS16 MFP_CFG(GPIO31, AF3)
+#define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3)
+#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
+
+/* UART1 */
+#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
+#define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST)
+#define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST)
+#define GPIO108_UART1_TXD MFP_CFG_DRV(GPIO108, AF2, FAST)
+#define GPIO109_UART1_CTS MFP_CFG(GPIO109, AF1)
+#define GPIO109_UART1_RTS MFP_CFG(GPIO109, AF2)
+#define GPIO110_UART1_RTS MFP_CFG(GPIO110, AF1)
+#define GPIO110_UART1_CTS MFP_CFG(GPIO110, AF2)
+#define GPIO111_UART1_RI MFP_CFG(GPIO111, AF1)
+#define GPIO111_UART1_DSR MFP_CFG(GPIO111, AF2)
+#define GPIO112_UART1_DTR MFP_CFG(GPIO111, AF1)
+#define GPIO112_UART1_DCD MFP_CFG(GPIO112, AF2)
+
+/* MMC1 */
+#define GPIO37_MMC1_DAT7 MFP_CFG(GPIO37, AF1)
+#define GPIO38_MMC1_DAT6 MFP_CFG(GPIO38, AF1)
+#define GPIO54_MMC1_DAT5 MFP_CFG(GPIO54, AF1)
+#define GPIO48_MMC1_DAT4 MFP_CFG(GPIO48, AF1)
+#define GPIO51_MMC1_DAT3 MFP_CFG(GPIO51, AF1)
+#define GPIO52_MMC1_DAT2 MFP_CFG(GPIO52, AF1)
+#define GPIO40_MMC1_DAT1 MFP_CFG(GPIO40, AF1)
+#define GPIO41_MMC1_DAT0 MFP_CFG(GPIO41, AF1)
+#define GPIO49_MMC1_CMD MFP_CFG(GPIO49, AF1)
+#define GPIO43_MMC1_CLK MFP_CFG(GPIO43, AF1)
+#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
+#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
+
+/* LCD */
+#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
+#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
+#define GPIO61_LCD_DD1 MFP_CFG(GPIO61, AF1)
+#define GPIO70_LCD_DD10 MFP_CFG(GPIO70, AF1)
+#define GPIO71_LCD_DD11 MFP_CFG(GPIO71, AF1)
+#define GPIO72_LCD_DD12 MFP_CFG(GPIO72, AF1)
+#define GPIO73_LCD_DD13 MFP_CFG(GPIO73, AF1)
+#define GPIO74_LCD_DD14 MFP_CFG(GPIO74, AF1)
+#define GPIO75_LCD_DD15 MFP_CFG(GPIO75, AF1)
+#define GPIO76_LCD_DD16 MFP_CFG(GPIO76, AF1)
+#define GPIO77_LCD_DD17 MFP_CFG(GPIO77, AF1)
+#define GPIO78_LCD_DD18 MFP_CFG(GPIO78, AF1)
+#define GPIO79_LCD_DD19 MFP_CFG(GPIO79, AF1)
+#define GPIO62_LCD_DD2 MFP_CFG(GPIO62, AF1)
+#define GPIO80_LCD_DD20 MFP_CFG(GPIO80, AF1)
+#define GPIO81_LCD_DD21 MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_DD22 MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_DD23 MFP_CFG(GPIO83, AF1)
+#define GPIO63_LCD_DD3 MFP_CFG(GPIO63, AF1)
+#define GPIO64_LCD_DD4 MFP_CFG(GPIO64, AF1)
+#define GPIO65_LCD_DD5 MFP_CFG(GPIO65, AF1)
+#define GPIO66_LCD_DD6 MFP_CFG(GPIO66, AF1)
+#define GPIO67_LCD_DD7 MFP_CFG(GPIO67, AF1)
+#define GPIO68_LCD_DD8 MFP_CFG(GPIO68, AF1)
+#define GPIO69_LCD_DD9 MFP_CFG(GPIO69, AF1)
+#define GPIO59_LCD_DENA_BIAS MFP_CFG(GPIO59, AF1)
+#define GPIO56_LCD_FCLK_RD MFP_CFG(GPIO56, AF1)
+#define GPIO57_LCD_LCLK_A0 MFP_CFG(GPIO57, AF1)
+#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1)
+#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1)
+
+/* I2S */
+#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
+#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
+#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1)
+#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
+#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
+
+#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
new file mode 100644
index 0000000..48a1cbc
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -0,0 +1,157 @@
+#ifndef __ASM_MACH_MFP_PXA910_H
+#define __ASM_MACH_MFP_PXA910_H
+
+#include <mach/mfp.h>
+
+/* UART2 */
+#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
+#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
+
+/* UART3 */
+#define GPIO31_UART3_RXD MFP_CFG(GPIO31, AF4)
+#define GPIO32_UART3_TXD MFP_CFG(GPIO32, AF4)
+
+/*IRDA*/
+#define GPIO51_IRDA_SHDN MFP_CFG(GPIO51, AF0)
+
+/* SMC */
+#define SM_nCS0_nCS0 MFP_CFG(SM_nCS0, AF0)
+#define SM_ADV_SM_ADV MFP_CFG(SM_ADV, AF0)
+#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
+#define SM_SCLK_SM_SCLK MFP_CFG(SM_SCLK, AF0)
+#define SM_BE0_SM_BE0 MFP_CFG(SM_BE0, AF1)
+#define SM_BE1_SM_BE1 MFP_CFG(SM_BE1, AF1)
+
+/* I2C */
+#define GPIO53_CI2C_SCL MFP_CFG(GPIO53, AF2)
+#define GPIO54_CI2C_SDA MFP_CFG(GPIO54, AF2)
+
+/* SSP1 (I2S) */
+#define GPIO24_SSP1_SDATA_IN MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
+#define GPIO21_SSP1_BITCLK MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
+#define GPIO20_SSP1_SYSCLK MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
+#define GPIO22_SSP1_SYNC MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
+#define GPIO23_SSP1_DATA_OUT MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
+#define GPIO124_MN_CLK_OUT MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
+#define GPIO123_CLK_REQ MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
+
+/* DFI */
+#define DF_IO0_ND_IO0 MFP_CFG(DF_IO0, AF0)
+#define DF_IO1_ND_IO1 MFP_CFG(DF_IO1, AF0)
+#define DF_IO2_ND_IO2 MFP_CFG(DF_IO2, AF0)
+#define DF_IO3_ND_IO3 MFP_CFG(DF_IO3, AF0)
+#define DF_IO4_ND_IO4 MFP_CFG(DF_IO4, AF0)
+#define DF_IO5_ND_IO5 MFP_CFG(DF_IO5, AF0)
+#define DF_IO6_ND_IO6 MFP_CFG(DF_IO6, AF0)
+#define DF_IO7_ND_IO7 MFP_CFG(DF_IO7, AF0)
+#define DF_IO8_ND_IO8 MFP_CFG(DF_IO8, AF0)
+#define DF_IO9_ND_IO9 MFP_CFG(DF_IO9, AF0)
+#define DF_IO10_ND_IO10 MFP_CFG(DF_IO10, AF0)
+#define DF_IO11_ND_IO11 MFP_CFG(DF_IO11, AF0)
+#define DF_IO12_ND_IO12 MFP_CFG(DF_IO12, AF0)
+#define DF_IO13_ND_IO13 MFP_CFG(DF_IO13, AF0)
+#define DF_IO14_ND_IO14 MFP_CFG(DF_IO14, AF0)
+#define DF_IO15_ND_IO15 MFP_CFG(DF_IO15, AF0)
+#define DF_nCS0_SM_nCS2_nCS0 MFP_CFG(DF_nCS0_SM_nCS2, AF0)
+#define DF_ALE_SM_WEn_ND_ALE MFP_CFG(DF_ALE_SM_WEn, AF1)
+#define DF_CLE_SM_OEn_ND_CLE MFP_CFG(DF_CLE_SM_OEn, AF0)
+#define DF_WEn_DF_WEn MFP_CFG(DF_WEn, AF1)
+#define DF_REn_DF_REn MFP_CFG(DF_REn, AF1)
+#define DF_RDY0_DF_RDY0 MFP_CFG(DF_RDY0, AF0)
+
+/*keypad*/
+#define GPIO00_KP_MKIN0 MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0 MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1 MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1 MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2 MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2 MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3 MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3 MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4 MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5 MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5 MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6 MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6 MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7 MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7 MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0 MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1 MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2 MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3 MFP_CFG(GPIO19, AF1)
+
+/* LCD */
+#define GPIO81_LCD_FCLK MFP_CFG(GPIO81, AF1)
+#define GPIO82_LCD_LCLK MFP_CFG(GPIO82, AF1)
+#define GPIO83_LCD_PCLK MFP_CFG(GPIO83, AF1)
+#define GPIO84_LCD_DENA MFP_CFG(GPIO84, AF1)
+#define GPIO85_LCD_DD0 MFP_CFG(GPIO85, AF1)
+#define GPIO86_LCD_DD1 MFP_CFG(GPIO86, AF1)
+#define GPIO87_LCD_DD2 MFP_CFG(GPIO87, AF1)
+#define GPIO88_LCD_DD3 MFP_CFG(GPIO88, AF1)
+#define GPIO89_LCD_DD4 MFP_CFG(GPIO89, AF1)
+#define GPIO90_LCD_DD5 MFP_CFG(GPIO90, AF1)
+#define GPIO91_LCD_DD6 MFP_CFG(GPIO91, AF1)
+#define GPIO92_LCD_DD7 MFP_CFG(GPIO92, AF1)
+#define GPIO93_LCD_DD8 MFP_CFG(GPIO93, AF1)
+#define GPIO94_LCD_DD9 MFP_CFG(GPIO94, AF1)
+#define GPIO95_LCD_DD10 MFP_CFG(GPIO95, AF1)
+#define GPIO96_LCD_DD11 MFP_CFG(GPIO96, AF1)
+#define GPIO97_LCD_DD12 MFP_CFG(GPIO97, AF1)
+#define GPIO98_LCD_DD13 MFP_CFG(GPIO98, AF1)
+#define GPIO100_LCD_DD14 MFP_CFG(GPIO100, AF1)
+#define GPIO101_LCD_DD15 MFP_CFG(GPIO101, AF1)
+#define GPIO102_LCD_DD16 MFP_CFG(GPIO102, AF1)
+#define GPIO103_LCD_DD17 MFP_CFG(GPIO103, AF1)
+#define GPIO104_LCD_DD18 MFP_CFG(GPIO104, AF1)
+#define GPIO105_LCD_DD19 MFP_CFG(GPIO105, AF1)
+#define GPIO106_LCD_DD20 MFP_CFG(GPIO106, AF1)
+#define GPIO107_LCD_DD21 MFP_CFG(GPIO107, AF1)
+#define GPIO108_LCD_DD22 MFP_CFG(GPIO108, AF1)
+#define GPIO109_LCD_DD23 MFP_CFG(GPIO109, AF1)
+
+#define GPIO104_LCD_SPIDOUT MFP_CFG(GPIO104, AF3)
+#define GPIO105_LCD_SPIDIN MFP_CFG(GPIO105, AF3)
+#define GPIO107_LCD_CS1 MFP_CFG(GPIO107, AF3)
+#define GPIO108_LCD_DCLK MFP_CFG(GPIO108, AF3)
+
+#define GPIO106_LCD_RESET MFP_CFG(GPIO106, AF0)
+
+/*smart panel*/
+#define GPIO82_LCD_A0 MFP_CFG(GPIO82, AF0)
+#define GPIO83_LCD_WR MFP_CFG(GPIO83, AF0)
+#define GPIO103_LCD_CS MFP_CFG(GPIO103, AF0)
+
+/*1wire*/
+#define GPIO106_1WIRE MFP_CFG(GPIO106, AF3)
+
+/*CCIC*/
+#define GPIO67_CCIC_IN7 MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
+#define GPIO68_CCIC_IN6 MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
+#define GPIO69_CCIC_IN5 MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
+#define GPIO70_CCIC_IN4 MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
+#define GPIO71_CCIC_IN3 MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
+#define GPIO72_CCIC_IN2 MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
+#define GPIO73_CCIC_IN1 MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
+#define GPIO74_CCIC_IN0 MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
+#define GPIO75_CAM_HSYNC MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
+#define GPIO76_CAM_VSYNC MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
+#define GPIO77_CAM_MCLK MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
+#define GPIO78_CAM_PCLK MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
+
+/* MMC1 */
+#define MMC1_DAT7_MMC1_DAT7 MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
+#define MMC1_DAT6_MMC1_DAT6 MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
+#define MMC1_DAT5_MMC1_DAT5 MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
+#define MMC1_DAT4_MMC1_DAT4 MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
+#define MMC1_DAT3_MMC1_DAT3 MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
+#define MMC1_DAT2_MMC1_DAT2 MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
+#define MMC1_DAT1_MMC1_DAT1 MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
+#define MMC1_DAT0_MMC1_DAT0 MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
+#define MMC1_CMD_MMC1_CMD MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
+#define MMC1_CLK_MMC1_CLK MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
+#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
+#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+
+#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h
new file mode 100644
index 0000000..277ea4c
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_MACH_MFP_H
+#define __ASM_MACH_MFP_H
+
+#include <plat/mfp.h>
+
+/*
+ * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
+ * bit different from those on PXA3xx. Bit [7:10] are now reserved, which
+ * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
+ *
+ * To cope with this difference and re-use the pxa3xx mfp code as much as
+ * possible, we make the following compromise:
+ *
+ * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
+ * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 3. Override MFP_CFG() and MFP_CFG_DRV()
+ * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
+ */
+
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+#undef MFP_CFG_LPM
+#undef MFP_CFG_X
+#undef MFP_CFG_DEFAULT
+
+#define MFP_CFG(pin, af) \
+ (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
+#endif /* __ASM_MACH_MFP_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
new file mode 100644
index 0000000..ef0a8a2
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA168_H
+#define __ASM_MACH_PXA168_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa168_device_uart1;
+extern struct pxa_device_desc pxa168_device_uart2;
+
+static inline int pxa168_add_uart(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa168_device_uart1; break;
+ case 2: d = &pxa168_device_uart2; break;
+ }
+
+ if (d == NULL)
+ return -EINVAL;
+
+ return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
new file mode 100644
index 0000000..b7aeaf5
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_PXA910_H
+#define __ASM_MACH_PXA910_H
+
+#include <mach/devices.h>
+
+extern struct pxa_device_desc pxa910_device_uart1;
+extern struct pxa_device_desc pxa910_device_uart2;
+
+static inline int pxa910_add_uart(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa910_device_uart1; break;
+ case 2: d = &pxa910_device_uart2; break;
+ }
+
+ if (d == NULL)
+ return -EINVAL;
+
+ return pxa_register_device(d, NULL, 0);
+}
+#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
new file mode 100644
index 0000000..c6b8c9d
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
+ *
+ * Application Peripheral Bus Clock Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APBC_H
+#define __ASM_MACH_REGS_APBC_H
+
+#include <mach/addr-map.h>
+
+#define APBC_VIRT_BASE (APB_VIRT_BASE + 0x015000)
+#define APBC_REG(x) (APBC_VIRT_BASE + (x))
+
+/*
+ * APB clock register offsets for PXA168
+ */
+#define APBC_PXA168_UART1 APBC_REG(0x000)
+#define APBC_PXA168_UART2 APBC_REG(0x004)
+#define APBC_PXA168_GPIO APBC_REG(0x008)
+#define APBC_PXA168_PWM0 APBC_REG(0x00c)
+#define APBC_PXA168_PWM1 APBC_REG(0x010)
+#define APBC_PXA168_SSP1 APBC_REG(0x01c)
+#define APBC_PXA168_SSP2 APBC_REG(0x020)
+#define APBC_PXA168_RTC APBC_REG(0x028)
+#define APBC_PXA168_TWSI0 APBC_REG(0x02c)
+#define APBC_PXA168_KPC APBC_REG(0x030)
+#define APBC_PXA168_TIMERS APBC_REG(0x034)
+#define APBC_PXA168_AIB APBC_REG(0x03c)
+#define APBC_PXA168_SW_JTAG APBC_REG(0x040)
+#define APBC_PXA168_ONEWIRE APBC_REG(0x048)
+#define APBC_PXA168_SSP3 APBC_REG(0x04c)
+#define APBC_PXA168_ASFAR APBC_REG(0x050)
+#define APBC_PXA168_ASSAR APBC_REG(0x054)
+#define APBC_PXA168_SSP4 APBC_REG(0x058)
+#define APBC_PXA168_SSP5 APBC_REG(0x05c)
+#define APBC_PXA168_TWSI1 APBC_REG(0x06c)
+#define APBC_PXA168_UART3 APBC_REG(0x070)
+#define APBC_PXA168_AC97 APBC_REG(0x084)
+
+/*
+ * APB Clock register offsets for PXA910
+ */
+#define APBC_PXA910_UART0 APBC_REG(0x000)
+#define APBC_PXA910_UART1 APBC_REG(0x004)
+#define APBC_PXA910_GPIO APBC_REG(0x008)
+#define APBC_PXA910_PWM0 APBC_REG(0x00c)
+#define APBC_PXA910_PWM1 APBC_REG(0x010)
+#define APBC_PXA910_PWM2 APBC_REG(0x014)
+#define APBC_PXA910_PWM3 APBC_REG(0x018)
+#define APBC_PXA910_SSP1 APBC_REG(0x01c)
+#define APBC_PXA910_SSP2 APBC_REG(0x020)
+#define APBC_PXA910_IPC APBC_REG(0x024)
+#define APBC_PXA910_TWSI0 APBC_REG(0x02c)
+#define APBC_PXA910_KPC APBC_REG(0x030)
+#define APBC_PXA910_TIMERS APBC_REG(0x034)
+#define APBC_PXA910_TBROT APBC_REG(0x038)
+#define APBC_PXA910_AIB APBC_REG(0x03c)
+#define APBC_PXA910_SW_JTAG APBC_REG(0x040)
+#define APBC_PXA910_TIMERS1 APBC_REG(0x044)
+#define APBC_PXA910_ONEWIRE APBC_REG(0x048)
+#define APBC_PXA910_SSP3 APBC_REG(0x04c)
+#define APBC_PXA910_ASFAR APBC_REG(0x050)
+#define APBC_PXA910_ASSAR APBC_REG(0x054)
+
+/* Common APB clock register bit definitions */
+#define APBC_APBCLK (1 << 0) /* APB Bus Clock Enable */
+#define APBC_FNCLK (1 << 1) /* Functional Clock Enable */
+#define APBC_RST (1 << 2) /* Reset Generation */
+
+/* Functional Clock Selection Mask */
+#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
+
+#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
new file mode 100644
index 0000000..9190305
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
+ *
+ * Application Subsystem Power Management Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_APMU_H
+#define __ASM_MACH_REGS_APMU_H
+
+#include <mach/addr-map.h>
+
+#define APMU_VIRT_BASE (AXI_VIRT_BASE + 0x82800)
+#define APMU_REG(x) (APMU_VIRT_BASE + (x))
+
+/* Clock Reset Control */
+#define APMU_IRE APMU_REG(0x048)
+#define APMU_LCD APMU_REG(0x04c)
+#define APMU_CCIC APMU_REG(0x050)
+#define APMU_SDH0 APMU_REG(0x054)
+#define APMU_SDH1 APMU_REG(0x058)
+#define APMU_USB APMU_REG(0x05c)
+#define APMU_NAND APMU_REG(0x060)
+#define APMU_DMA APMU_REG(0x064)
+#define APMU_GEU APMU_REG(0x068)
+#define APMU_BUS APMU_REG(0x06c)
+
+#define APMU_FNCLK_EN (1 << 4)
+#define APMU_AXICLK_EN (1 << 3)
+#define APMU_FNRST_DIS (1 << 1)
+#define APMU_AXIRST_DIS (1 << 0)
+
+#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
new file mode 100644
index 0000000..e5f0872
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
+ *
+ * Interrupt Control Unit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ICU_H
+#define __ASM_MACH_ICU_H
+
+#include <mach/addr-map.h>
+
+#define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000)
+#define ICU_REG(x) (ICU_VIRT_BASE + (x))
+
+#define ICU_INT_CONF(n) ICU_REG((n) << 2)
+#define ICU_INT_CONF_AP_INT (1 << 6)
+#define ICU_INT_CONF_CP_INT (1 << 5)
+#define ICU_INT_CONF_IRQ (1 << 4)
+#define ICU_INT_CONF_MASK (0xf)
+
+#define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108) /* AP FIQ Selected Interrupt */
+#define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C) /* AP IRQ Selected Interrupt */
+#define ICU_AP_GBL_IRQ_MSK ICU_REG(0x114) /* AP Global Interrupt Mask */
+#define ICU_INT_STATUS_0 ICU_REG(0x128) /* Interrupt Stuats 0 */
+#define ICU_INT_STATUS_1 ICU_REG(0x12C) /* Interrupt Status 1 */
+
+#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/include/mach/regs-timers.h
new file mode 100644
index 0000000..45589fe
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-timers.h
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
+ *
+ * Timers Module
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_TIMERS_H
+#define __ASM_MACH_REGS_TIMERS_H
+
+#include <mach/addr-map.h>
+
+#define TIMERS1_VIRT_BASE (APB_VIRT_BASE + 0x14000)
+#define TIMERS2_VIRT_BASE (APB_VIRT_BASE + 0x16000)
+
+#define TMR_CCR (0x0000)
+#define TMR_TN_MM(n, m) (0x0004 + ((n) << 3) + (((n) + (m)) << 2))
+#define TMR_CR(n) (0x0028 + ((n) << 2))
+#define TMR_SR(n) (0x0034 + ((n) << 2))
+#define TMR_IER(n) (0x0040 + ((n) << 2))
+#define TMR_PLVR(n) (0x004c + ((n) << 2))
+#define TMR_PLCR(n) (0x0058 + ((n) << 2))
+#define TMR_WMER (0x0064)
+#define TMR_WMR (0x0068)
+#define TMR_WVR (0x006c)
+#define TMR_WSR (0x0070)
+#define TMR_ICR(n) (0x0074 + ((n) << 2))
+#define TMR_WICR (0x0080)
+#define TMR_CER (0x0084)
+#define TMR_CMR (0x0088)
+#define TMR_ILR(n) (0x008c + ((n) << 2))
+#define TMR_WCR (0x0098)
+#define TMR_WFAR (0x009c)
+#define TMR_WSAR (0x00A0)
+#define TMR_CVWR(n) (0x00A4 + ((n) << 2))
+
+#define TMR_CCR_CS_0(x) (((x) & 0x3) << 0)
+#define TMR_CCR_CS_1(x) (((x) & 0x7) << 2)
+#define TMR_CCR_CS_2(x) (((x) & 0x3) << 5)
+
+#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
new file mode 100644
index 0000000..001edfe
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_SYSTEM_H
+#define __ASM_MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ cpu_reset(0);
+}
+#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
new file mode 100644
index 0000000..6cebbd0
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE 3250000
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
new file mode 100644
index 0000000..c93d5fa
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-mmp/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/addr-map.h>
+
+#define UART1_BASE (APB_PHYS_BASE + 0x36000)
+#define UART2_BASE (APB_PHYS_BASE + 0x17000)
+#define UART3_BASE (APB_PHYS_BASE + 0x18000)
+
+static inline void putc(char c)
+{
+ volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
+ /* UART enabled? */
+ if (!(UART[UART_IER] & UART_IER_UUE))
+ return;
+
+ while (!(UART[UART_LSR] & UART_LSR_THRE))
+ barrier();
+
+ UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
new file mode 100644
index 0000000..b60ccaf
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe000000
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 0000000..52ff2f0
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/mach-mmp/irq.c
+ *
+ * Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ * Author: Bin Yang <bin.yang@marvell.com>
+ * Created: Sep 30, 2008
+ * Copyright: Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+#define IRQ_ROUTE_TO_AP (ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
+
+#define PRIORITY_DEFAULT 0x1
+#define PRIORITY_NONE 0x0 /* means IRQ disabled */
+
+static void icu_mask_irq(unsigned int irq)
+{
+ __raw_writel(PRIORITY_NONE, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+ __raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+ .name = "icu_irq",
+ .ack = icu_mask_irq,
+ .mask = icu_mask_irq,
+ .unmask = icu_unmask_irq,
+};
+
+void __init icu_init_irq(void)
+{
+ int irq;
+
+ for (irq = 0; irq < 64; irq++) {
+ icu_mask_irq(irq);
+ set_irq_chip(irq, &icu_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
new file mode 100644
index 0000000..ae92446
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -0,0 +1,111 @@
+/*
+ * linux/arch/arm/mach-mmp/pxa168.c
+ *
+ * Code specific to PXA168
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/cputype.h>
+#include <mach/regs-apbc.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/devices.h>
+#include <mach/mfp.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
+{
+ MFP_ADDR_X(GPIO0, GPIO36, 0x04c),
+ MFP_ADDR_X(GPIO37, GPIO55, 0x000),
+ MFP_ADDR_X(GPIO56, GPIO123, 0x0e0),
+ MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
+
+ MFP_ADDR_END,
+};
+
+#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa168_init_gpio(void)
+{
+ int i;
+
+ /* enable GPIO clock */
+ __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
+
+ /* unmask GPIO edge detection for all 4 banks - APMASKx */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xffffffff, APMASK(i));
+
+ pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
+}
+
+void __init pxa168_init_irq(void)
+{
+ icu_init_irq();
+ pxa168_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
+static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa168_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa168_init(void)
+{
+ if (cpu_is_pxa168()) {
+ mfp_init_base(MFPR_VIRT_BASE);
+ mfp_init_addr(pxa168_mfp_addr_map);
+ pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
+ clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(pxa168_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa168_timer_init(void)
+{
+ /* this is early, we have to initialize the CCU registers by
+ * ourselves instead of using clk_* API. Clock rate is defined
+ * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
+ */
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
+
+ /* 3.25MHz, bus/functional clock enabled, release reset */
+ __raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
+
+ timer_init(IRQ_PXA168_TIMER1);
+}
+
+struct sys_timer pxa168_timer = {
+ .init = pxa168_timer_init,
+};
+
+/* on-chip devices */
+PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
+PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
new file mode 100644
index 0000000..453f8f7
--- /dev/null
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-mmp/pxa910.c
+ *
+ * Code specific to PXA910
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <asm/mach/time.h>
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/dma.h>
+#include <mach/mfp.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
+
+static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
+{
+ MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
+ MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
+ MFP_ADDR_X(GPIO100, GPIO109, 0x238),
+
+ MFP_ADDR(GPIO123, 0xcc),
+ MFP_ADDR(GPIO124, 0xd0),
+
+ MFP_ADDR(DF_IO0, 0x40),
+ MFP_ADDR(DF_IO1, 0x3c),
+ MFP_ADDR(DF_IO2, 0x38),
+ MFP_ADDR(DF_IO3, 0x34),
+ MFP_ADDR(DF_IO4, 0x30),
+ MFP_ADDR(DF_IO5, 0x2c),
+ MFP_ADDR(DF_IO6, 0x28),
+ MFP_ADDR(DF_IO7, 0x24),
+ MFP_ADDR(DF_IO8, 0x20),
+ MFP_ADDR(DF_IO9, 0x1c),
+ MFP_ADDR(DF_IO10, 0x18),
+ MFP_ADDR(DF_IO11, 0x14),
+ MFP_ADDR(DF_IO12, 0x10),
+ MFP_ADDR(DF_IO13, 0xc),
+ MFP_ADDR(DF_IO14, 0x8),
+ MFP_ADDR(DF_IO15, 0x4),
+
+ MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
+ MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
+ MFP_ADDR(SM_nCS0, 0x4c),
+ MFP_ADDR(SM_nCS1, 0x50),
+ MFP_ADDR(DF_WEn, 0x54),
+ MFP_ADDR(DF_REn, 0x58),
+ MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
+ MFP_ADDR(DF_ALE_SM_WEn, 0x60),
+ MFP_ADDR(SM_SCLK, 0x64),
+ MFP_ADDR(DF_RDY0, 0x68),
+ MFP_ADDR(SM_BE0, 0x6c),
+ MFP_ADDR(SM_BE1, 0x70),
+ MFP_ADDR(SM_ADV, 0x74),
+ MFP_ADDR(DF_RDY1, 0x78),
+ MFP_ADDR(SM_ADVMUX, 0x7c),
+ MFP_ADDR(SM_RDY, 0x80),
+
+ MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
+
+ MFP_ADDR_END,
+};
+
+#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
+
+static void __init pxa910_init_gpio(void)
+{
+ int i;
+
+ /* enable GPIO clock */
+ __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
+
+ /* unmask GPIO edge detection for all 4 banks - APMASKx */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xffffffff, APMASK(i));
+
+ pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
+}
+
+void __init pxa910_init_irq(void)
+{
+ icu_init_irq();
+ pxa910_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
+static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+
+/* device and clock bindings */
+static struct clk_lookup pxa910_clkregs[] = {
+ INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+ INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+};
+
+static int __init pxa910_init(void)
+{
+ if (cpu_is_pxa910()) {
+ mfp_init_base(MFPR_VIRT_BASE);
+ mfp_init_addr(pxa910_mfp_addr_map);
+ pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
+ clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+ }
+
+ return 0;
+}
+postcore_initcall(pxa910_init);
+
+/* system timer - clock enabled, 3.25MHz */
+#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
+
+static void __init pxa910_timer_init(void)
+{
+ /* reset and configure */
+ __raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
+ __raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
+
+ timer_init(IRQ_PXA910_AP1_TIMER1);
+}
+
+struct sys_timer pxa910_timer = {
+ .init = pxa910_timer_init,
+};
+
+/* on-chip devices */
+
+/* NOTE: there are totally 3 UARTs on PXA910:
+ *
+ * UART1 - Slow UART (can be used both by AP and CP)
+ * UART2/3 - Fast UART
+ *
+ * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
+ * they are re-ordered as:
+ *
+ * pxa910_device_uart1 - UART2 as FFUART
+ * pxa910_device_uart2 - UART3 as BTUART
+ *
+ * UART1 is not used by AP for the moment.
+ */
+PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
+PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
new file mode 100644
index 0000000..0e0c922
--- /dev/null
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mach-mmp/tavorevb.c
+ *
+ * Support for the Marvell PXA910-based TavorEVB Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long tavorevb_pin_config[] __initdata = {
+ /* UART2 */
+ GPIO47_UART2_RXD,
+ GPIO48_UART2_TXD,
+
+ /* SMC */
+ SM_nCS0_nCS0,
+ SM_ADV_SM_ADV,
+ SM_SCLK_SM_SCLK,
+ SM_SCLK_SM_SCLK,
+ SM_BE0_SM_BE0,
+ SM_BE1_SM_BE1,
+
+ /* DFI */
+ DF_IO0_ND_IO0,
+ DF_IO1_ND_IO1,
+ DF_IO2_ND_IO2,
+ DF_IO3_ND_IO3,
+ DF_IO4_ND_IO4,
+ DF_IO5_ND_IO5,
+ DF_IO6_ND_IO6,
+ DF_IO7_ND_IO7,
+ DF_IO8_ND_IO8,
+ DF_IO9_ND_IO9,
+ DF_IO10_ND_IO10,
+ DF_IO11_ND_IO11,
+ DF_IO12_ND_IO12,
+ DF_IO13_ND_IO13,
+ DF_IO14_ND_IO14,
+ DF_IO15_ND_IO15,
+ DF_nCS0_SM_nCS2_nCS0,
+ DF_ALE_SM_WEn_ND_ALE,
+ DF_CLE_SM_OEn_ND_CLE,
+ DF_WEn_DF_WEn,
+ DF_REn_DF_REn,
+ DF_RDY0_DF_RDY0,
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = SMC_CS1_PHYS_BASE + 0x300,
+ .end = SMC_CS1_PHYS_BASE + 0xfffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(80),
+ .end = gpio_to_irq(80),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .dev = {
+ .platform_data = &tavorevb_smc91x_info,
+ },
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void __init tavorevb_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
+
+ /* on-chip devices */
+ pxa910_add_uart(1);
+
+ /* off-chip devices */
+ platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa910_init_irq,
+ .timer = &pxa910_timer,
+ .init_machine = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
new file mode 100644
index 0000000..b03a6ed
--- /dev/null
+++ b/arch/arm/mach-mmp/time.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-mmp/time.c
+ *
+ * Support for clocksource and clockevents
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ * 2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
+ * 2008-10-08: Bin Yang <bin.yang@marvell.com>
+ *
+ * The timers module actually includes three timers, each timer with upto
+ * three match comparators. Timer #0 is used here in free-running mode as
+ * the clock source, and match comparator #1 used as clock event device.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-timers.h>
+#include <mach/irqs.h>
+
+#include "clock.h"
+
+#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
+
+#define MAX_DELTA (0xfffffffe)
+#define MIN_DELTA (16)
+
+#define TCR2NS_SCALE_FACTOR 10
+
+static unsigned long tcr2ns_scale;
+
+static void __init set_tcr2ns_scale(unsigned long tcr_rate)
+{
+ unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
+ do_div(v, tcr_rate);
+ tcr2ns_scale = v;
+ /*
+ * We want an even value to automatically clear the top bit
+ * returned by cnt32_to_63() without an additional run time
+ * instruction. So if the LSB is 1 then round it up.
+ */
+ if (tcr2ns_scale & 1)
+ tcr2ns_scale++;
+}
+
+/*
+ * FIXME: the timer needs some delay to stablize the counter capture
+ */
+static inline uint32_t timer_read(void)
+{
+ int delay = 100;
+
+ __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
+
+ while (delay--)
+ cpu_relax();
+
+ return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
+}
+
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(timer_read());
+ return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* disable and clear pending interrupt status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+ __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
+ c->event_handler(c);
+ return IRQ_HANDLED;
+}
+
+static int timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ unsigned long flags, next;
+
+ local_irq_save(flags);
+
+ /* clear pending interrupt status and enable */
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+
+ next = timer_read() + delta;
+ __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+static void timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* disable the matching interrupt */
+ __raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ }
+ local_irq_restore(flags);
+}
+
+static struct clock_event_device ckevt = {
+ .name = "clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .set_next_event = timer_set_next_event,
+ .set_mode = timer_set_mode,
+};
+
+static cycle_t clksrc_read(void)
+{
+ return timer_read();
+}
+
+static struct clocksource cksrc = {
+ .name = "clocksource",
+ .shift = 20,
+ .rating = 200,
+ .read = clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init timer_config(void)
+{
+ uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+ uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
+ uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
+
+ __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+
+ ccr &= TMR_CCR_CS_0(0x3);
+ __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+
+ /* free-running mode */
+ __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
+
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
+ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */
+ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+
+ /* enable timer counter */
+ __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
+}
+
+static struct irqaction timer_irq = {
+ .name = "timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = timer_interrupt,
+ .dev_id = &ckevt,
+};
+
+void __init timer_init(int irq)
+{
+ timer_config();
+
+ set_tcr2ns_scale(CLOCK_TICK_RATE);
+
+ ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
+ ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
+ ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
+ ckevt.cpumask = cpumask_of(0);
+
+ cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
+
+ setup_irq(irq, &timer_irq);
+
+ clocksource_register(&cksrc);
+ clockevents_register_device(&ckevt);
+}
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
new file mode 100644
index 0000000..08cfef6
--- /dev/null
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/arm/mach-mmp/ttc_dkb.c
+ *
+ * Support for the Marvell PXA910-based TTC_DKB Development Platform.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa910.h>
+#include <mach/pxa910.h>
+
+#include "common.h"
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+static unsigned long ttc_dkb_pin_config[] __initdata = {
+ /* UART2 */
+ GPIO47_UART2_RXD,
+ GPIO48_UART2_TXD,
+};
+
+static void __init ttc_dkb_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
+
+ /* on-chip devices */
+ pxa910_add_uart(1);
+}
+
+MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .boot_params = 0x00000100,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa910_init_irq,
+ .timer = &pxa910_timer,
+ .init_machine = ttc_dkb_init,
+MACHINE_END
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index f05ad2e..574ccc4 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -17,7 +17,7 @@
void arch_idle(void);
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
for (;;) ; /* depends on IPC w/ other core */
}
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index d83cb86..6fbe68f 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -8,6 +8,12 @@
Say 'Y' here if you want your kernel to support the
Marvell DB-78x00-BP Development Board.
+config MACH_RD78X00_MASA
+ bool "Marvell RD-78x00-mASA Reference Design"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell RD-78x00-mASA Reference Design.
+
endmenu
endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index ec16c05..da628b7 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,2 +1,3 @@
obj-y += common.o addr-map.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b0e4e0d..a575daa 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -14,7 +14,9 @@
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/ethtool.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
@@ -430,9 +432,22 @@
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
{
+ u32 dev, rev;
+
eth_data->shared = &mv78xx0_ge10_shared;
mv78xx0_ge10.dev.platform_data = eth_data;
+ /*
+ * On the Z0, ge10 and ge11 are internally connected back
+ * to back, and not brought out.
+ */
+ mv78xx0_pcie_id(&dev, &rev);
+ if (dev == MV78X00_Z0_DEV_ID) {
+ eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+ eth_data->speed = SPEED_1000;
+ eth_data->duplex = DUPLEX_FULL;
+ }
+
platform_device_register(&mv78xx0_ge10_shared);
platform_device_register(&mv78xx0_ge10);
}
@@ -484,13 +499,101 @@
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
{
+ u32 dev, rev;
+
eth_data->shared = &mv78xx0_ge11_shared;
mv78xx0_ge11.dev.platform_data = eth_data;
+ /*
+ * On the Z0, ge10 and ge11 are internally connected back
+ * to back, and not brought out.
+ */
+ mv78xx0_pcie_id(&dev, &rev);
+ if (dev == MV78X00_Z0_DEV_ID) {
+ eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+ eth_data->speed = SPEED_1000;
+ eth_data->duplex = DUPLEX_FULL;
+ }
+
platform_device_register(&mv78xx0_ge11_shared);
platform_device_register(&mv78xx0_ge11);
}
+/*****************************************************************************
+ * I2C bus 0
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_0_resources[] = {
+ {
+ .name = "i2c 0 base",
+ .start = I2C_0_PHYS_BASE,
+ .end = I2C_0_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c 0 irq",
+ .start = IRQ_MV78XX0_I2C_0,
+ .end = IRQ_MV78XX0_I2C_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device mv78xx0_i2c_0 = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv78xx0_i2c_0_resources),
+ .resource = mv78xx0_i2c_0_resources,
+ .dev = {
+ .platform_data = &mv78xx0_i2c_0_pdata,
+ },
+};
+
+/*****************************************************************************
+ * I2C bus 1
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource mv78xx0_i2c_1_resources[] = {
+ {
+ .name = "i2c 1 base",
+ .start = I2C_1_PHYS_BASE,
+ .end = I2C_1_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c 1 irq",
+ .start = IRQ_MV78XX0_I2C_1,
+ .end = IRQ_MV78XX0_I2C_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device mv78xx0_i2c_1 = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv78xx0_i2c_1_resources),
+ .resource = mv78xx0_i2c_1_resources,
+ .dev = {
+ .platform_data = &mv78xx0_i2c_1_pdata,
+ },
+};
+
+void __init mv78xx0_i2c_init(void)
+{
+ platform_device_register(&mv78xx0_i2c_0);
+ platform_device_register(&mv78xx0_i2c_1);
+}
/*****************************************************************************
* SATA
@@ -719,6 +822,32 @@
/*****************************************************************************
* General
****************************************************************************/
+static char * __init mv78xx0_id(void)
+{
+ u32 dev, rev;
+
+ mv78xx0_pcie_id(&dev, &rev);
+
+ if (dev == MV78X00_Z0_DEV_ID) {
+ if (rev == MV78X00_REV_Z0)
+ return "MV78X00-Z0";
+ else
+ return "MV78X00-Rev-Unsupported";
+ } else if (dev == MV78100_DEV_ID) {
+ if (rev == MV78100_REV_A0)
+ return "MV78100-A0";
+ else
+ return "MV78100-Rev-Unsupported";
+ } else if (dev == MV78200_DEV_ID) {
+ if (rev == MV78100_REV_A0)
+ return "MV78200-A0";
+ else
+ return "MV78200-Rev-Unsupported";
+ } else {
+ return "Device-Unknown";
+ }
+}
+
static int __init is_l2_writethrough(void)
{
return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
@@ -737,7 +866,8 @@
get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
tclk = get_tclk();
- printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
+ printk(KERN_INFO "%s ", mv78xx0_id());
+ printk("core #%d, ", core_index);
printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 78af5de..befc224 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -29,6 +29,8 @@
void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min);
+void mv78xx0_pcie_id(u32 *dev, u32 *rev);
+
void mv78xx0_ehci0_init(void);
void mv78xx0_ehci1_init(void);
void mv78xx0_ehci2_init(void);
@@ -42,6 +44,7 @@
void mv78xx0_uart1_init(void);
void mv78xx0_uart2_init(void);
void mv78xx0_uart3_init(void);
+void mv78xx0_i2c_init(void);
extern struct sys_timer mv78xx0_timer;
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 2e285bb..efdabe0 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -14,6 +14,7 @@
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
+#include <linux/i2c.h>
#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -28,21 +29,22 @@
};
static struct mv643xx_eth_platform_data db78x00_ge10_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(10),
};
static struct mv643xx_eth_platform_data db78x00_ge11_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
+ .phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
static struct mv_sata_platform_data db78x00_sata_data = {
.n_ports = 2,
};
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+ I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
static void __init db78x00_init(void)
{
/*
@@ -64,6 +66,8 @@
mv78xx0_sata_init(&db78x00_sata_data);
mv78xx0_uart0_init();
mv78xx0_uart2_init();
+ mv78xx0_i2c_init();
+ i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
} else {
mv78xx0_uart1_init();
mv78xx0_uart3_init();
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index e930ea5..582cffc 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -80,6 +80,18 @@
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID 0x6381
+#define MV78X00_REV_Z0 1
+
+#define MV78100_DEV_ID 0x7810
+#define MV78100_REV_A0 1
+
+#define MV78200_DEV_ID 0x7820
+#define MV78200_REV_A0 1
+
+/*
* Register Map
*/
#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
@@ -90,6 +102,8 @@
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
+#define I2C_0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000)
+#define I2C_1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1100)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 7d51794..1d6350b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -17,7 +17,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index aad3a7a..a560439 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -33,6 +33,12 @@
static struct resource pcie_mem_space;
+void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
+{
+ *dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
+ *rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
+}
+
static void __init mv78xx0_pcie_preinit(void)
{
int i;
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
new file mode 100644
index 0000000..e136b7a
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
+ *
+ * Marvell RD-78x00-mASA Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
+};
+
+static struct mv_sata_platform_data rd78x00_masa_sata_data = {
+ .n_ports = 2,
+};
+
+static void __init rd78x00_masa_init(void)
+{
+ /*
+ * Basic MV78x00 setup. Needs to be called early.
+ */
+ mv78xx0_init();
+
+ /*
+ * Partition on-chip peripherals between the two CPU cores.
+ */
+ if (mv78xx0_core_index() == 0) {
+ mv78xx0_ehci0_init();
+ mv78xx0_ehci1_init();
+ mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
+ mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
+ mv78xx0_sata_init(&rd78x00_masa_sata_data);
+ mv78xx0_uart0_init();
+ mv78xx0_uart2_init();
+ } else {
+ mv78xx0_ehci2_init();
+ mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
+ mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
+ mv78xx0_uart1_init();
+ mv78xx0_uart3_init();
+ }
+}
+
+static int __init rd78x00_pci_init(void)
+{
+ /*
+ * Assign all PCIe devices to CPU core #0.
+ */
+ if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
+ mv78xx0_pcie_init(1, 1);
+
+ return 0;
+}
+subsys_initcall(rd78x00_pci_init);
+
+MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = MV78XX0_REGS_PHYS_BASE,
+ .io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = rd78x00_masa_init,
+ .map_io = mv78xx0_map_io,
+ .init_irq = mv78xx0_init_irq,
+ .timer = &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
index 2b59fc7..eb7660f 100644
--- a/arch/arm/mach-mx1/Kconfig
+++ b/arch/arm/mach-mx1/Kconfig
@@ -1,6 +1,6 @@
if ARCH_MX1
-comment "MX1 Platforms"
+comment "MX1 platforms:"
config MACH_MXLADS
bool
@@ -11,4 +11,9 @@
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
+config MACH_SCB9328
+ bool "Synertronixx scb9328"
+ help
+ Say Y here if you are using a Synertronixx scb9328 board
+
endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index b969719..82f1309 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -8,3 +8,4 @@
# Specific board support
obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 4bcd1ec..0d0f306 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -25,6 +25,7 @@
#include <mach/clock.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include "crm_regs.h"
static int _clk_enable(struct clk *clk)
@@ -87,33 +88,6 @@
return clk->parent->set_rate(clk->parent, rate);
}
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref *
- ((mfi << 16) + (mfn << 16) / (mfd + 1));
- quot = (pd + 1) * (1 << 16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned long)ll;
-}
-
static unsigned long clk16m_get_rate(struct clk *clk)
{
return 16000000;
@@ -188,7 +162,7 @@
static unsigned long system_clk_get_rate(struct clk *clk)
{
- return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+ return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
clk_get_rate(clk->parent));
}
@@ -200,7 +174,7 @@
static unsigned long mcu_clk_get_rate(struct clk *clk)
{
- return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+ return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
clk_get_rate(clk->parent));
}
@@ -488,7 +462,7 @@
};
static struct clk dma_clk = {
- .name = "dma_clk",
+ .name = "dma",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -539,7 +513,7 @@
};
static struct clk uart_clk = {
- .name = "uart_clk",
+ .name = "uart",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
@@ -621,7 +595,7 @@
&rtc_clk,
};
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx1_clocks_init(unsigned long fref)
{
struct clk **clkp;
unsigned int reg;
@@ -652,5 +626,7 @@
clk_enable(&hclk);
clk_enable(&fclk);
+ mxc_timer_init(&gpt_clk);
+
return 0;
}
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 686d8d2..97f42d9 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -23,8 +23,11 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
+#include "devices.h"
+
static struct resource imx_csi_resources[] = {
[0] = {
.start = 0x00224000,
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 2e4b185..7ae229b 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -16,15 +16,22 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/irqs.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux.h>
#include "devices.h"
/*
@@ -104,6 +111,55 @@
};
/*
+ * I2C
+ */
+
+#ifdef CONFIG_I2C_IMX
+static int i2c_pins[] = {
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+};
+
+static int i2c_init(struct device *dev)
+{
+ return mxc_gpio_setup_multiple_pins(i2c_pins,
+ ARRAY_SIZE(i2c_pins), "I2C");
+}
+
+static void i2c_exit(struct device *dev)
+{
+ mxc_gpio_release_multiple_pins(i2c_pins,
+ ARRAY_SIZE(i2c_pins));
+}
+
+static struct pcf857x_platform_data pcf857x_data[] = {
+ {
+ .gpio_base = 4 * 32,
+ }, {
+ .gpio_base = 4 * 32 + 16,
+ }
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+ .bitrate = 100000,
+ .init = i2c_init,
+ .exit = i2c_exit,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf857x", 0x22),
+ .type = "pcf8575",
+ .platform_data = &pcf857x_data[0],
+ }, {
+ I2C_BOARD_INFO("pcf857x", 0x24),
+ .type = "pcf8575",
+ .platform_data = &pcf857x_data[1],
+ },
+};
+#endif
+
+/*
* Board init
*/
static void __init mx1ads_init(void)
@@ -114,12 +170,19 @@
/* Physmap flash */
mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+ /* I2C */
+#ifdef CONFIG_I2C_IMX
+ i2c_register_board_info(0, mx1ads_i2c_devices,
+ ARRAY_SIZE(mx1ads_i2c_devices));
+
+ mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+#endif
}
static void __init mx1ads_timer_init(void)
{
- mxc_clocks_init(32000);
- mxc_timer_init("gpt_clk");
+ mx1_clocks_init(32000);
}
struct sys_timer mx1ads_timer = {
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
new file mode 100644
index 0000000..0e71f3f
--- /dev/null
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/arm/mach-mx1/scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+ .start = IMX_CS0_PHYS,
+ .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device scb_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &scb_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+ [0] = {
+ .name = "address area",
+ .start = IMX_CS5_PHYS,
+ .end = IMX_CS5_PHYS + 1,
+ .flags = IORESOURCE_MEM /* address access */
+ },
+ [1] = {
+ .name = "data area",
+ .start = IMX_CS5_PHYS + 4,
+ .end = IMX_CS5_PHYS + 5,
+ .flags = IORESOURCE_MEM /* data access */
+ },
+ [2] = {
+ .start = IRQ_GPIOC(3),
+ .end = IRQ_GPIOC(3),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+ },
+};
+
+static struct platform_device dm9000x_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000x_resources),
+ .resource = dm9000x_resources,
+ .dev = {
+ .platform_data = &dm9000_platdata,
+ }
+};
+
+static int mxc_uart1_pins[] = {
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+ mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins));
+ return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+ .init = uart1_mxc_init,
+ .exit = uart1_mxc_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &scb_flash_device,
+ &dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+ mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+ printk(KERN_INFO"Scb9328: Adding devices\n");
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+ mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+ .init = scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+ /* Sascha Hauer */
+ .phys_io = 0x00200000,
+ .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
+ .boot_params = 0x08000100,
+ .map_io = mxc_map_io,
+ .init_irq = mxc_init_irq,
+ .timer = &scb9328_timer,
+ .init_machine = scb9328_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 1eaa97c..42a7888 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -1,14 +1,22 @@
-comment "MX2 family CPU support"
- depends on ARCH_MX2
+if ARCH_MX2
+
+choice
+ prompt "CPUs:"
+ default MACH_MX21
+
+config MACH_MX21
+ bool "i.MX21 support"
+ help
+ This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
- depends on ARCH_MX2
help
This enables support for Freescale's MX2 based i.MX27 processor.
-comment "MX2 Platforms"
- depends on ARCH_MX2
+endchoice
+
+comment "MX2 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
@@ -37,3 +45,5 @@
PCM970 evaluation board.
endchoice
+
+endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 382d860..6e1a2bf 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -6,6 +6,8 @@
obj-y := system.o generic.o devices.o serial.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
index 696831d..e867398 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-mx2/Makefile.boot
@@ -1,3 +1,7 @@
- zreladdr-y := 0xA0008000
-params_phys-y := 0xA0000100
-initrd_phys-y := 0xA0800000
+zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000
+params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
+initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
+
+zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
+params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
+initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
new file mode 100644
index 0000000..2dee5c8
--- /dev/null
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -0,0 +1,984 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+static int _clk_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CSCR);
+ reg |= CCM_CSCR_SPEN;
+ __raw_writel(reg, CCM_CSCR);
+
+ while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+ ;
+ return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CSCR);
+ reg &= ~CCM_CSCR_SPEN;
+ __raw_writel(reg, CCM_CSCR);
+}
+
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 64)
+ div = 64;
+
+ return parent_rate / div;
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return -EINVAL;
+
+ div = parent_rate / rate;
+ if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg =
+ __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+ (clk->id << 3));
+ reg |= div << (clk->id << 3);
+ __raw_writel(reg, CCM_PCDR1);
+
+ return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+ unsigned long usb_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+ return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
+{
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
+
+ return 2UL * parent_rate / pdf;
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+ return _clk_ssix_recalc(clk,
+ (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
+ >> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+ return _clk_ssix_recalc(clk,
+ (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+ CCM_PCDR0_SSI2BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+ unsigned long nfc_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
+ >> CCM_PCDR0_NFCDIV_OFFSET;
+
+ return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long external_high_reference; /* in Hz */
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz.
+ */
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static unsigned long external_low_reference; /* in Hz */
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+
+static unsigned long _clk_fpm_recalc(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) * 512;
+}
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+ .parent = &ckil_clk,
+ .get_rate = _clk_fpm_recalc,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long ref_clk;
+ unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+ unsigned long long temp;
+
+ ref_clk = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_MPCTL0);
+ pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
+ mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+ mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+ mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+ mfi = (mfi <= 5) ? 5 : mfi;
+ temp = 2LL * ref_clk * mfn;
+ do_div(temp, mfd + 1);
+ temp = 2LL * ref_clk * mfi + temp;
+ do_div(temp, pdf + 1);
+
+ return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_fclk_get_rate(struct clk *clk)
+{
+ unsigned long parent_rate;
+ u32 div;
+
+ div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+ parent_rate = clk_get_rate(clk->parent);
+
+ return parent_rate / (div+1);
+}
+
+static struct clk fclk_clk = {
+ .parent = &mpll_clk,
+ .get_rate = _clk_fclk_get_rate
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long ref_clk;
+ unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+ unsigned long long temp;
+
+ ref_clk = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_SPCTL0);
+ pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+ mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+ mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+ mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+ mfi = (mfi <= 5) ? 5 : mfi;
+ temp = 2LL * ref_clk * mfn;
+ do_div(temp, mfd + 1);
+ temp = 2LL * ref_clk * mfi + temp;
+ do_div(temp, pdf + 1);
+
+ return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_spll_clk,
+ .enable = _clk_spll_enable,
+ .disable = _clk_spll_disable,
+};
+
+static unsigned long get_hclk_clk(struct clk *clk)
+{
+ unsigned long rate;
+ unsigned long bclk_pdf;
+
+ bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+ >> CCM_CSCR_BCLK_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (bclk_pdf + 1);
+}
+
+static struct clk hclk_clk = {
+ .parent = &fclk_clk,
+ .get_rate = get_hclk_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+ unsigned long rate;
+ unsigned long ipg_pdf;
+
+ ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+ .parent = &hclk_clk,
+ .get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+ unsigned long perclk_pdf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return 0;
+
+ perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+ return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+ {
+ .id = 0,
+ .parent = &mpll_clk,
+ .get_rate = _clk_perclkx_recalc,
+ }, {
+ .id = 1,
+ .parent = &mpll_clk,
+ .get_rate = _clk_perclkx_recalc,
+ }, {
+ .id = 2,
+ .parent = &mpll_clk,
+ .round_rate = _clk_perclkx_round_rate,
+ .set_rate = _clk_perclkx_set_rate,
+ .get_rate = _clk_perclkx_recalc,
+ /* Enable/Disable done via lcd_clkc[1] */
+ }, {
+ .id = 3,
+ .parent = &mpll_clk,
+ .round_rate = _clk_perclkx_round_rate,
+ .set_rate = _clk_perclkx_set_rate,
+ .get_rate = _clk_perclkx_recalc,
+ /* Enable/Disable done via csi_clk[1] */
+ },
+};
+
+static struct clk uart_ipg_clk[];
+
+static struct clk uart_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[1],
+ }, {
+ .id = 2,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[2],
+ }, {
+ .id = 3,
+ .parent = &per_clk[0],
+ .secondary = &uart_ipg_clk[3],
+ },
+};
+
+static struct clk uart_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART1_REG,
+ .enable_shift = CCM_PCCR_UART1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART2_REG,
+ .enable_shift = CCM_PCCR_UART2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART3_REG,
+ .enable_shift = CCM_PCCR_UART3_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 3,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_UART4_REG,
+ .enable_shift = CCM_PCCR_UART4_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk gpt_ipg_clk[];
+
+static struct clk gpt_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[0],
+ .secondary = &gpt_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[0],
+ .secondary = &gpt_ipg_clk[1],
+ }, {
+ .id = 2,
+ .parent = &per_clk[0],
+ .secondary = &gpt_ipg_clk[2],
+ },
+};
+
+static struct clk gpt_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPT1_REG,
+ .enable_shift = CCM_PCCR_GPT1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPT2_REG,
+ .enable_shift = CCM_PCCR_GPT2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 2,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPT3_REG,
+ .enable_shift = CCM_PCCR_GPT3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk pwm_clk[] = {
+ {
+ .parent = &per_clk[0],
+ .secondary = &pwm_clk[1],
+ }, {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_PWM_REG,
+ .enable_shift = CCM_PCCR_PWM_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk sdhc_ipg_clk[];
+
+static struct clk sdhc_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[1],
+ .secondary = &sdhc_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[1],
+ .secondary = &sdhc_ipg_clk[1],
+ },
+};
+
+static struct clk sdhc_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SDHC1_REG,
+ .enable_shift = CCM_PCCR_SDHC1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SDHC2_REG,
+ .enable_shift = CCM_PCCR_SDHC2_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk cspi_ipg_clk[];
+
+static struct clk cspi_clk[] = {
+ {
+ .id = 0,
+ .parent = &per_clk[1],
+ .secondary = &cspi_ipg_clk[0],
+ }, {
+ .id = 1,
+ .parent = &per_clk[1],
+ .secondary = &cspi_ipg_clk[1],
+ }, {
+ .id = 2,
+ .parent = &per_clk[1],
+ .secondary = &cspi_ipg_clk[2],
+ },
+};
+
+static struct clk cspi_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_CSPI1_REG,
+ .enable_shift = CCM_PCCR_CSPI1_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_CSPI2_REG,
+ .enable_shift = CCM_PCCR_CSPI2_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 3,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_CSPI3_REG,
+ .enable_shift = CCM_PCCR_CSPI3_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk lcdc_clk[] = {
+ {
+ .parent = &per_clk[2],
+ .secondary = &lcdc_clk[1],
+ .round_rate = _clk_parent_round_rate,
+ .set_rate = _clk_parent_set_rate,
+ }, {
+ .parent = &ipg_clk,
+ .secondary = &lcdc_clk[2],
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_LCDC_REG,
+ .enable_shift = CCM_PCCR_LCDC_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_LCDC_REG,
+ .enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk csi_clk[] = {
+ {
+ .parent = &per_clk[3],
+ .secondary = &csi_clk[1],
+ .round_rate = _clk_parent_round_rate,
+ .set_rate = _clk_parent_set_rate,
+ }, {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_CSI_REG,
+ .enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk usb_clk[] = {
+ {
+ .parent = &spll_clk,
+ .get_rate = _clk_usb_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_USBOTG_REG,
+ .enable_shift = CCM_PCCR_USBOTG_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
+ .enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk ssi_ipg_clk[];
+
+static struct clk ssi_clk[] = {
+ {
+ .id = 0,
+ .parent = &mpll_clk,
+ .secondary = &ssi_ipg_clk[0],
+ .get_rate = _clk_ssi1_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI1_BAUD_REG,
+ .enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &mpll_clk,
+ .secondary = &ssi_ipg_clk[1],
+ .get_rate = _clk_ssi2_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI2_BAUD_REG,
+ .enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk ssi_ipg_clk[] = {
+ {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI1_REG,
+ .enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
+ .disable = _clk_disable,
+ }, {
+ .id = 1,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SSI2_REG,
+ .enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+
+static struct clk nfc_clk = {
+ .parent = &fclk_clk,
+ .get_rate = _clk_nfc_recalc,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_NFC_REG,
+ .enable_shift = CCM_PCCR_NFC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk dma_clk[] = {
+ {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_DMA_REG,
+ .enable_shift = CCM_PCCR_DMA_OFFSET,
+ .disable = _clk_disable,
+ .secondary = &dma_clk[1],
+ }, {
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_DMA_REG,
+ .enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
+ .disable = _clk_disable,
+ },
+};
+
+static struct clk brom_clk = {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_BROM_REG,
+ .enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk emma_clk[] = {
+ {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_EMMA_REG,
+ .enable_shift = CCM_PCCR_EMMA_OFFSET,
+ .disable = _clk_disable,
+ .secondary = &emma_clk[1],
+ }, {
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_EMMA_REG,
+ .enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk slcdc_clk[] = {
+ {
+ .parent = &hclk_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_SLCDC_REG,
+ .enable_shift = CCM_PCCR_SLCDC_OFFSET,
+ .disable = _clk_disable,
+ .secondary = &slcdc_clk[1],
+ }, {
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
+ .enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
+ .disable = _clk_disable,
+ }
+};
+
+static struct clk wdog_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_WDT_REG,
+ .enable_shift = CCM_PCCR_WDT_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_GPIO_REG,
+ .enable_shift = CCM_PCCR_GPIO_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk i2c_clk = {
+ .id = 0,
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_I2C1_REG,
+ .enable_shift = CCM_PCCR_I2C1_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_KPP_REG,
+ .enable_shift = CCM_PCCR_KPP_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_OWIRE_REG,
+ .enable_shift = CCM_PCCR_OWIRE_OFFSET,
+ .disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_enable,
+ .enable_reg = CCM_PCCR_RTC_REG,
+ .enable_shift = CCM_PCCR_RTC_OFFSET,
+ .disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > 8)
+ div = 8;
+
+ return parent_rate / div;
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg = __raw_readl(CCM_PCDR0);
+
+ if (clk->parent == &usb_clk[0]) {
+ reg &= ~CCM_PCDR0_48MDIV_MASK;
+ reg |= div << CCM_PCDR0_48MDIV_OFFSET;
+ }
+ __raw_writel(reg, CCM_PCDR0);
+
+ return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+ u32 div = 0;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->parent == &usb_clk[0]) /* 48M */
+ div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
+ >> CCM_PCDR0_48MDIV_OFFSET;
+ div++;
+
+ return parent_rate / div;
+}
+
+static struct clk clko_clk;
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+ if (parent == &ckil_clk)
+ reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &fpm_clk)
+ reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ckih_clk)
+ reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == mpll_clk.parent)
+ reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == spll_clk.parent)
+ reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &mpll_clk)
+ reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &spll_clk)
+ reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &fclk_clk)
+ reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &hclk_clk)
+ reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ipg_clk)
+ reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[0])
+ reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[1])
+ reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[2])
+ reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &per_clk[3])
+ reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ssi_clk[0])
+ reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &ssi_clk[1])
+ reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &nfc_clk)
+ reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &usb_clk[0])
+ reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
+ else if (parent == &clko_clk)
+ reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, CCM_CCSR);
+
+ return 0;
+}
+
+static struct clk clko_clk = {
+ .get_rate = _clk_clko_recalc,
+ .set_rate = _clk_clko_set_rate,
+ .round_rate = _clk_clko_round_rate,
+ .set_parent = _clk_clko_set_parent,
+};
+
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+static struct clk_lookup lookups[] __initdata = {
+/* It's unlikely that any driver wants one of them directly:
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+ _REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+ _REGISTER_CLOCK(NULL, "fpm", fpm_clk)
+ _REGISTER_CLOCK(NULL, "mpll", mpll_clk)
+ _REGISTER_CLOCK(NULL, "spll", spll_clk)
+ _REGISTER_CLOCK(NULL, "fclk", fclk_clk)
+ _REGISTER_CLOCK(NULL, "hclk", hclk_clk)
+ _REGISTER_CLOCK(NULL, "ipg", ipg_clk)
+*/
+ _REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
+ _REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
+ _REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
+ _REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
+ _REGISTER_CLOCK(NULL, "clko", clko_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+ _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
+ _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
+ _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
+ _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
+ _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
+ _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
+ _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
+ _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
+ _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+ _REGISTER_CLOCK(NULL, "csi", csi_clk[0])
+ _REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+ _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
+ _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
+ _REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+ _REGISTER_CLOCK(NULL, "dma", dma_clk[0])
+ _REGISTER_CLOCK(NULL, "brom", brom_clk)
+ _REGISTER_CLOCK(NULL, "emma", emma_clk[0])
+ _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
+ _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+ _REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+ _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+ _REGISTER_CLOCK(NULL, "owire", owire_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+};
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ int i;
+ u32 cscr;
+
+ external_low_reference = lref;
+ external_high_reference = href;
+
+ /* detect clock reference for both system PLL */
+ cscr = CSCR();
+ if (cscr & CCM_CSCR_MCU)
+ mpll_clk.parent = &ckih_clk;
+ else
+ mpll_clk.parent = &fpm_clk;
+
+ if (cscr & CCM_CSCR_SP)
+ spll_clk.parent = &ckih_clk;
+ else
+ spll_clk.parent = &fpm_clk;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* Turn off all clock gates */
+ __raw_writel(0, CCM_PCCR0);
+ __raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
+
+ /* This turns of the serial PLL as well */
+ spll_clk.disable(&spll_clk);
+
+ /* This will propagate to all children and init all the clock rates. */
+ clk_enable(&per_clk[0]);
+ clk_enable(&gpio_clk);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+ clk_enable(&uart_clk[0]);
+#endif
+
+ mxc_timer_init(&gpt_clk[0]);
+ return 0;
+}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index c69896d..3f7280c 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -1,6 +1,7 @@
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -20,23 +21,60 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/spinlock.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
#include <mach/clock.h>
#include <mach/common.h>
-#include <asm/div64.h>
+#include <mach/hardware.h>
-#include "crm_regs.h"
+/* Register offsets */
+#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
+#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
+#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
+#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
+#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
+#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
+#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
+#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
+#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
+#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
+#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
+#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
+#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
+#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-static struct clk ckil_clk;
-static struct clk mpll_clk;
-static struct clk mpll_main_clk[];
-static struct clk spll_clk;
+#define CCM_CSCR_UPDATE_DIS (1 << 31)
+#define CCM_CSCR_SSI2 (1 << 23)
+#define CCM_CSCR_SSI1 (1 << 22)
+#define CCM_CSCR_VPU (1 << 21)
+#define CCM_CSCR_MSHC (1 << 20)
+#define CCM_CSCR_SPLLRES (1 << 19)
+#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN (1 << 0)
-static int _clk_enable(struct clk *clk)
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC (1 << 15)
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+static struct clk mpll_main1_clk, mpll_main2_clk;
+
+static int clk_pccr_enable(struct clk *clk)
{
unsigned long reg;
+ if (!clk->enable_reg)
+ return 0;
+
reg = __raw_readl(clk->enable_reg);
reg |= 1 << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
@@ -44,16 +82,19 @@
return 0;
}
-static void _clk_disable(struct clk *clk)
+static void clk_pccr_disable(struct clk *clk)
{
unsigned long reg;
+ if (!clk->enable_reg)
+ return;
+
reg = __raw_readl(clk->enable_reg);
reg &= ~(1 << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}
-static int _clk_spll_enable(struct clk *clk)
+static int clk_spll_enable(struct clk *clk)
{
unsigned long reg;
@@ -61,13 +102,12 @@
reg |= CCM_CSCR_SPEN;
__raw_writel(reg, CCM_CSCR);
- while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
- ;
+ while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
return 0;
}
-static void _clk_spll_disable(struct clk *clk)
+static void clk_spll_disable(struct clk *clk)
{
unsigned long reg;
@@ -76,192 +116,30 @@
__raw_writel(reg, CCM_CSCR);
}
-static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1)
+static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR0);
- reg |= mask0;
- __raw_writel(reg, CCM_PCCR0);
-
- reg = __raw_readl(CCM_PCCR1);
- reg |= mask1;
- __raw_writel(reg, CCM_PCCR1);
-
-}
-
-static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR0);
- reg &= ~mask0;
- __raw_writel(reg, CCM_PCCR0);
-
- reg = __raw_readl(CCM_PCCR1);
- reg &= ~mask1;
- __raw_writel(reg, CCM_PCCR1);
-}
-
-static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg |= mask1;
- __raw_writel(reg, CCM_PCCR1);
-
- reg = __raw_readl(CCM_PCCR0);
- reg |= mask0;
- __raw_writel(reg, CCM_PCCR0);
-}
-
-static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg &= ~mask1;
- __raw_writel(reg, CCM_PCCR1);
-
- reg = __raw_readl(CCM_PCCR0);
- reg &= ~mask0;
- __raw_writel(reg, CCM_PCCR0);
-}
-
-static int _clk_dma_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-
- return 0;
-}
-
-static void _clk_dma_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK);
-}
-
-static int _clk_rtic_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-
- return 0;
-}
-
-static void _clk_rtic_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK);
-}
-
-static int _clk_emma_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-
- return 0;
-}
-
-static void _clk_emma_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK);
-}
-
-static int _clk_slcdc_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-
- return 0;
-}
-
-static void _clk_slcdc_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK);
-}
-
-static int _clk_fec_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-
- return 0;
-}
-
-static void _clk_fec_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK);
-}
-
-static int _clk_vpu_enable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK;
- __raw_writel(reg, CCM_PCCR1);
-
- return 0;
-}
-
-static void _clk_vpu_disable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_PCCR1);
- reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK);
- __raw_writel(reg, CCM_PCCR1);
-}
-
-static int _clk_sahara2_enable(struct clk *clk)
-{
- _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-
- return 0;
-}
-
-static void _clk_sahara2_disable(struct clk *clk)
-{
- _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK);
-}
-
-static int _clk_mstick1_enable(struct clk *clk)
-{
- _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-
- return 0;
-}
-
-static void _clk_mstick1_disable(struct clk *clk)
-{
- _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK);
-}
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
- int cscr = CSCR();
+ int cscr = __raw_readl(CCM_CSCR);
if (clk->parent == parent)
return 0;
if (mx27_revision() >= CHIP_REV_2_0) {
- if (parent == &mpll_main_clk[0]) {
+ if (parent == &mpll_main1_clk) {
cscr |= CCM_CSCR_ARM_SRC;
} else {
- if (parent == &mpll_main_clk[1])
+ if (parent == &mpll_main2_clk)
cscr &= ~CCM_CSCR_ARM_SRC;
else
return -EINVAL;
}
__raw_writel(cscr, CCM_CSCR);
- } else
- return -ENODEV;
-
- clk->parent = parent;
- return 0;
+ clk->parent = parent;
+ return 0;
+ }
+ return -ENODEV;
}
-static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
{
int div;
unsigned long parent_rate;
@@ -278,7 +156,7 @@
return parent_rate / div;
}
-static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_cpu(struct clk *clk, unsigned long rate)
{
unsigned int div;
uint32_t reg;
@@ -295,19 +173,18 @@
reg = __raw_readl(CCM_CSCR);
if (mx27_revision() >= CHIP_REV_2_0) {
- reg &= ~CCM_CSCR_ARM_MASK;
- reg |= div << CCM_CSCR_ARM_OFFSET;
- reg &= ~0x06;
- __raw_writel(reg | 0x80000000, CCM_CSCR);
+ reg &= ~(3 << 12);
+ reg |= div << 12;
+ reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
+ __raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
} else {
- printk(KERN_ERR "Cant set CPU frequency!\n");
+ printk(KERN_ERR "Can't set CPU frequency!\n");
}
return 0;
}
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
- unsigned long rate)
+static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
{
u32 div;
unsigned long parent_rate;
@@ -324,7 +201,7 @@
return parent_rate / div;
}
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+static int set_rate_per(struct clk *clk, unsigned long rate)
{
u32 reg;
u32 div;
@@ -340,84 +217,65 @@
return -EINVAL;
div--;
- reg =
- __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
- (clk->id << 3));
+ reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
reg |= div << (clk->id << 3);
__raw_writel(reg, CCM_PCDR1);
return 0;
}
-static unsigned long _clk_usb_recalc(struct clk *clk)
+static unsigned long get_rate_usb(struct clk *clk)
{
unsigned long usb_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
- usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+ usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
return parent_rate / (usb_pdf + 1U);
}
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
+static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
{
- unsigned long ssi1_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
- ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >>
- CCM_PCDR0_SSI1BAUDDIV_OFFSET;
-
if (mx27_revision() >= CHIP_REV_2_0)
- ssi1_pdf += 4;
+ pdf += 4; /* MX27 TO2+ */
else
- ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf;
+ pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
- return 2UL * parent_rate / ssi1_pdf;
+ return 2UL * parent_rate / pdf;
}
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
+static unsigned long get_rate_ssi1(struct clk *clk)
{
- unsigned long ssi2_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
- CCM_PCDR0_SSI2BAUDDIV_OFFSET;
-
- if (mx27_revision() >= CHIP_REV_2_0)
- ssi2_pdf += 4;
- else
- ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf;
-
- return 2UL * parent_rate / ssi2_pdf;
+ return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
}
-static unsigned long _clk_nfc_recalc(struct clk *clk)
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+ return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
{
unsigned long nfc_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
- if (mx27_revision() >= CHIP_REV_2_0) {
- nfc_pdf =
- (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >>
- CCM_PCDR0_NFCDIV2_OFFSET;
- } else {
- nfc_pdf =
- (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >>
- CCM_PCDR0_NFCDIV_OFFSET;
- }
+ if (mx27_revision() >= CHIP_REV_2_0)
+ nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
+ else
+ nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
return parent_rate / (nfc_pdf + 1);
}
-static unsigned long _clk_vpu_recalc(struct clk *clk)
+static unsigned long get_rate_vpu(struct clk *clk)
{
unsigned long vpu_pdf;
unsigned long parent_rate;
@@ -425,25 +283,27 @@
parent_rate = clk_get_rate(clk->parent);
if (mx27_revision() >= CHIP_REV_2_0) {
- vpu_pdf =
- (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >>
- CCM_PCDR0_VPUDIV2_OFFSET;
+ vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
vpu_pdf += 4;
} else {
- vpu_pdf =
- (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >>
- CCM_PCDR0_VPUDIV_OFFSET;
+ vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
}
+
return 2UL * parent_rate / vpu_pdf;
}
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
{
return clk->parent->round_rate(clk->parent, rate);
}
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long get_rate_parent(struct clk *clk)
+{
+ return clk_get_rate(clk->parent);
+}
+
+static int set_rate_parent(struct clk *clk, unsigned long rate)
{
return clk->parent->set_rate(clk->parent, rate);
}
@@ -451,1112 +311,380 @@
/* in Hz */
static unsigned long external_high_reference = 26000000;
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
+static unsigned long get_rate_high_reference(struct clk *clk)
{
return external_high_reference;
}
+/* in Hz */
+static unsigned long external_low_reference = 32768;
+
+static unsigned long get_rate_low_reference(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static unsigned long get_rate_fpm(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) * 1024;
+}
+
+static unsigned long get_rate_mpll(struct clk *clk)
+{
+ return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+ clk_get_rate(clk->parent));
+}
+
+static unsigned long get_rate_mpll_main(struct clk *clk)
+{
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ /* i.MX27 TO2:
+ * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
+ * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
+ */
+ if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+ return 2UL * parent_rate / 3UL;
+
+ return parent_rate;
+}
+
+static unsigned long get_rate_spll(struct clk *clk)
+{
+ uint32_t reg;
+ unsigned long rate;
+
+ rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(CCM_SPCTL0);
+
+ /* On TO2 we have to write the value back. Otherwise we
+ * read 0 from this register the next time.
+ */
+ if (mx27_revision() >= CHIP_REV_2_0)
+ __raw_writel(reg, CCM_SPCTL0);
+
+ return mxc_decode_pll(reg, rate);
+}
+
+static unsigned long get_rate_cpu(struct clk *clk)
+{
+ u32 div;
+ unsigned long rate;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
+ else
+ div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (div + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+ unsigned long rate, bclk_pdf;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
+ else
+ bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (bclk_pdf + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+ unsigned long rate, ipg_pdf;
+
+ if (mx27_revision() >= CHIP_REV_2_0)
+ return clk_get_rate(clk->parent);
+ else
+ ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
+
+ rate = clk_get_rate(clk->parent);
+ return rate / (ipg_pdf + 1);
+}
+
+static unsigned long get_rate_per(struct clk *clk)
+{
+ unsigned long perclk_pdf, parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->id < 0 || clk->id > 3)
+ return 0;
+
+ perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
+
+ return parent_rate / (perclk_pdf + 1);
+}
+
/*
* the high frequency external clock reference
* Default case is 26MHz. Could be changed at runtime
* with a call to change_external_high_reference()
*/
static struct clk ckih_clk = {
- .name = "ckih",
- .get_rate = get_high_reference_clock_rate,
+ .get_rate = get_rate_high_reference,
};
-/* in Hz */
-static unsigned long external_low_reference = 32768;
+static struct clk mpll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_rate_mpll,
+};
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
+/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provides the clock source whose rate is same as MPLL
+ */
+static struct clk mpll_main1_clk = {
+ .id = 0,
+ .parent = &mpll_clk,
+ .get_rate = get_rate_mpll_main,
+};
+
+/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provides the clock source whose rate is same MPLL * 2 / 3
+ */
+static struct clk mpll_main2_clk = {
+ .id = 1,
+ .parent = &mpll_clk,
+ .get_rate = get_rate_mpll_main,
+};
+
+static struct clk ahb_clk = {
+ .parent = &mpll_main2_clk,
+ .get_rate = get_rate_ahb,
+};
+
+static struct clk ipg_clk = {
+ .parent = &ahb_clk,
+ .get_rate = get_rate_ipg,
+};
+
+static struct clk cpu_clk = {
+ .parent = &mpll_main2_clk,
+ .set_parent = clk_cpu_set_parent,
+ .round_rate = round_rate_cpu,
+ .get_rate = get_rate_cpu,
+ .set_rate = set_rate_cpu,
+};
+
+static struct clk spll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = get_rate_spll,
+ .enable = clk_spll_enable,
+ .disable = clk_spll_disable,
+};
/*
* the low frequency external clock reference
- * Default case is 32.768kHz Could be changed at runtime
- * with a call to change_external_low_reference()
+ * Default case is 32.768kHz.
*/
static struct clk ckil_clk = {
- .name = "ckil",
- .get_rate = get_low_reference_clock_rate,
+ .get_rate = get_rate_low_reference,
};
-static unsigned long get_mpll_clk(struct clk *clk)
-{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_MPCTL0);
- pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
- mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
- .name = "mpll",
- .parent = &ckih_clk,
- .get_rate = get_mpll_clk,
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+ .parent = &ckil_clk,
+ .get_rate = get_rate_fpm,
};
-static unsigned long _clk_mpll_main_get_rate(struct clk *clk)
-{
- unsigned long parent_rate;
+#define PCCR0 CCM_PCCR0
+#define PCCR1 CCM_PCCR1
- parent_rate = clk_get_rate(clk->parent);
-
- /* i.MX27 TO2:
- * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2
- * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3
- */
-
- if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
- return 2UL * parent_rate / 3UL;
-
- return parent_rate;
-}
-
-static struct clk mpll_main_clk[] = {
- {
- /* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provide the clock source whose rate is same as MPLL
- */
- .name = "mpll_main",
- .id = 0,
- .parent = &mpll_clk,
- .get_rate = _clk_mpll_main_get_rate
- }, {
- /* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provide the clock source whose rate is same MPLL * 2/3
- */
- .name = "mpll_main",
- .id = 1,
- .parent = &mpll_clk,
- .get_rate = _clk_mpll_main_get_rate
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .enable = clk_pccr_enable, \
+ .disable = clk_pccr_disable, \
+ .secondary = s, \
+ .parent = p, \
}
-};
-static unsigned long get_spll_clk(struct clk *clk)
-{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_SPCTL0);
- /*TODO: This is TO2 Bug */
- if (mx27_revision() >= CHIP_REV_2_0)
- __raw_writel(reg, CCM_SPCTL0);
-
- pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
- mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
- .name = "spll",
- .parent = &ckih_clk,
- .get_rate = get_spll_clk,
- .enable = _clk_spll_enable,
- .disable = _clk_spll_disable,
-};
-
-static unsigned long get_cpu_clk(struct clk *clk)
-{
- u32 div;
- unsigned long rate;
-
- if (mx27_revision() >= CHIP_REV_2_0)
- div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET;
- else
- div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (div + 1);
-}
-
-static struct clk cpu_clk = {
- .name = "cpu_clk",
- .parent = &mpll_main_clk[1],
- .set_parent = _clk_cpu_set_parent,
- .round_rate = _clk_cpu_round_rate,
- .get_rate = get_cpu_clk,
- .set_rate = _clk_cpu_set_rate,
-};
-
-static unsigned long get_ahb_clk(struct clk *clk)
-{
- unsigned long rate;
- unsigned long bclk_pdf;
-
- if (mx27_revision() >= CHIP_REV_2_0)
- bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK)
- >> CCM_CSCR_AHB_OFFSET;
- else
- bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
- >> CCM_CSCR_BCLK_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (bclk_pdf + 1);
-}
-
-static struct clk ahb_clk = {
- .name = "ahb_clk",
- .parent = &mpll_main_clk[1],
- .get_rate = get_ahb_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
- unsigned long rate;
- unsigned long ipg_pdf;
-
- if (mx27_revision() >= CHIP_REV_2_0)
- return clk_get_rate(clk->parent);
- else
- ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
- .name = "ipg_clk",
- .parent = &ahb_clk,
- .get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
- unsigned long perclk_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return 0;
-
- perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
- return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
- {
- .name = "per_clk",
- .id = 0,
- .parent = &mpll_main_clk[1],
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK1_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "per_clk",
- .id = 1,
- .parent = &mpll_main_clk[1],
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK2_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "per_clk",
- .id = 2,
- .parent = &mpll_main_clk[1],
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK3_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "per_clk",
- .id = 3,
- .parent = &mpll_main_clk[1],
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_PERCLK4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart1_clk[] = {
- {
- .name = "uart_clk",
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &uart1_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART1_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart2_clk[] = {
- {
- .name = "uart_clk",
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &uart2_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart3_clk[] = {
- {
- .name = "uart_clk",
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &uart3_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart4_clk[] = {
- {
- .name = "uart_clk",
- .id = 3,
- .parent = &per_clk[0],
- .secondary = &uart4_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart5_clk[] = {
- {
- .name = "uart_clk",
- .id = 4,
- .parent = &per_clk[0],
- .secondary = &uart5_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 4,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART5_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-struct clk uart6_clk[] = {
- {
- .name = "uart_clk",
- .id = 5,
- .parent = &per_clk[0],
- .secondary = &uart6_clk[1],
- }, {
- .name = "uart_ipg_clk",
- .id = 5,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_UART6_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt1_clk[] = {
- {
- .name = "gpt_clk",
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &gpt1_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT1_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt2_clk[] = {
- {
- .name = "gpt_clk",
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &gpt2_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt3_clk[] = {
- {
- .name = "gpt_clk",
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &gpt3_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt4_clk[] = {
- {
- .name = "gpt_clk",
- .id = 3,
- .parent = &per_clk[0],
- .secondary = &gpt4_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt5_clk[] = {
- {
- .name = "gpt_clk",
- .id = 4,
- .parent = &per_clk[0],
- .secondary = &gpt5_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 4,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT5_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt6_clk[] = {
- {
- .name = "gpt_clk",
- .id = 5,
- .parent = &per_clk[0],
- .secondary = &gpt6_clk[1],
- }, {
- .name = "gpt_ipg_clk",
- .id = 5,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_GPT6_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk pwm_clk[] = {
- {
- .name = "pwm_clk",
- .parent = &per_clk[0],
- .secondary = &pwm_clk[1],
- }, {
- .name = "pwm_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_PWM_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk sdhc1_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &sdhc1_clk[1],
- }, {
- .name = "sdhc_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SDHC1_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk sdhc2_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &sdhc2_clk[1],
- }, {
- .name = "sdhc_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SDHC2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk sdhc3_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 2,
- .parent = &per_clk[1],
- .secondary = &sdhc3_clk[1],
- }, {
- .name = "sdhc_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SDHC3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk cspi1_clk[] = {
- {
- .name = "cspi_clk",
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &cspi1_clk[1],
- }, {
- .name = "cspi_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_CSPI1_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk cspi2_clk[] = {
- {
- .name = "cspi_clk",
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &cspi2_clk[1],
- }, {
- .name = "cspi_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_CSPI2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk cspi3_clk[] = {
- {
- .name = "cspi_clk",
- .id = 2,
- .parent = &per_clk[1],
- .secondary = &cspi3_clk[1],
- }, {
- .name = "cspi_ipg_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_CSPI3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk lcdc_clk[] = {
- {
- .name = "lcdc_clk",
- .parent = &per_clk[2],
- .secondary = &lcdc_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .name = "lcdc_ipg_clk",
- .parent = &ipg_clk,
- .secondary = &lcdc_clk[2],
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_LCDC_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "lcdc_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk csi_clk[] = {
- {
- .name = "csi_perclk",
- .parent = &per_clk[3],
- .secondary = &csi_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .name = "csi_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk usb_clk[] = {
- {
- .name = "usb_clk",
- .parent = &spll_clk,
- .get_rate = _clk_usb_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_USBOTG_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "usb_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET,
- .disable = _clk_disable,
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = get_rate_##getsetround, \
+ .set_rate = set_rate_##getsetround, \
+ .round_rate = round_rate_##getsetround, \
+ .enable = clk_pccr_enable, \
+ .disable = clk_pccr_disable, \
+ .secondary = s, \
+ .parent = p, \
}
-};
-static struct clk ssi1_clk[] = {
- {
- .name = "ssi_clk",
- .id = 0,
- .parent = &mpll_main_clk[1],
- .secondary = &ssi1_clk[1],
- .get_rate = _clk_ssi1_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "ssi_ipg_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET,
- .disable = _clk_disable,
+/* Forward declaration to keep the following list in order */
+static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
+ dma_clk1, lcdc_clk2, vpu_clk1;
+
+/* All clocks we can gate through PCCRx in the order of PCCRx bits */
+DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk);
+DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk);
+DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk);
+DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
+DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
+DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
+DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk);
+DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk);
+DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
+DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
+DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk);
+
+/* Clocks we cannot directly gate, but drivers need their rates */
+DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
},
+
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+ _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
+ _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
+ _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
+ _REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
+ _REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
+ _REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
+ _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+ _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
+ _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
+ _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
+ _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+ _REGISTER_CLOCK(NULL, "csi", csi_clk)
+ _REGISTER_CLOCK(NULL, "usb", usb_clk)
+ _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
+ _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK(NULL, "vpu", vpu_clk)
+ _REGISTER_CLOCK(NULL, "dma", dma_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "brom", brom_clk)
+ _REGISTER_CLOCK(NULL, "emma", emma_clk)
+ _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "mstick", mstick_clk)
+ _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
};
-static struct clk ssi2_clk[] = {
- {
- .name = "ssi_clk",
- .id = 1,
- .parent = &mpll_main_clk[1],
- .secondary = &ssi2_clk[1],
- .get_rate = _clk_ssi2_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "ssi_ipg_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk nfc_clk = {
- .name = "nfc_clk",
- .parent = &cpu_clk,
- .get_rate = _clk_nfc_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk vpu_clk = {
- .name = "vpu_clk",
- .parent = &mpll_main_clk[1],
- .get_rate = _clk_vpu_recalc,
- .enable = _clk_vpu_enable,
- .disable = _clk_vpu_disable,
-};
-
-static struct clk dma_clk = {
- .name = "dma_clk",
- .parent = &ahb_clk,
- .enable = _clk_dma_enable,
- .disable = _clk_dma_disable,
-};
-
-static struct clk rtic_clk = {
- .name = "rtic_clk",
- .parent = &ahb_clk,
- .enable = _clk_rtic_enable,
- .disable = _clk_rtic_disable,
-};
-
-static struct clk brom_clk = {
- .name = "brom_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk emma_clk = {
- .name = "emma_clk",
- .parent = &ahb_clk,
- .enable = _clk_emma_enable,
- .disable = _clk_emma_disable,
-};
-
-static struct clk slcdc_clk = {
- .name = "slcdc_clk",
- .parent = &ahb_clk,
- .enable = _clk_slcdc_enable,
- .disable = _clk_slcdc_disable,
-};
-
-static struct clk fec_clk = {
- .name = "fec_clk",
- .parent = &ahb_clk,
- .enable = _clk_fec_enable,
- .disable = _clk_fec_disable,
-};
-
-static struct clk emi_clk = {
- .name = "emi_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk sahara2_clk = {
- .name = "sahara_clk",
- .parent = &ahb_clk,
- .enable = _clk_sahara2_enable,
- .disable = _clk_sahara2_disable,
-};
-
-static struct clk ata_clk = {
- .name = "ata_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mstick1_clk = {
- .name = "mstick1_clk",
- .parent = &ipg_clk,
- .enable = _clk_mstick1_enable,
- .disable = _clk_mstick1_disable,
-};
-
-static struct clk wdog_clk = {
- .name = "wdog_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR1_WDT_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
- .name = "gpio_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR1,
- .enable_shift = CCM_PCCR0_GPIO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk i2c_clk[] = {
- {
- .name = "i2c_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_I2C1_OFFSET,
- .disable = _clk_disable,
- }, {
- .name = "i2c_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_I2C2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk iim_clk = {
- .name = "iim_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_IIM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
- .name = "kpp_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_KPP_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
- .name = "owire_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_OWIRE_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
- .name = "rtc_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_RTC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk scc_clk = {
- .name = "scc_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR0,
- .enable_shift = CCM_PCCR0_SCC_OFFSET,
- .disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+/* Adjust the clock path for TO2 and later */
+static void __init to2_adjust_clocks(void)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- div = 8;
-
- return parent_rate / div;
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK;
- reg |= div << CCM_PCDR0_CLKODIV_OFFSET;
- __raw_writel(reg, CCM_PCDR0);
-
- return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >>
- CCM_PCDR0_CLKODIV_OFFSET;
- div++;
-
- return parent_rate / div;
-}
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
- if (parent == &ckil_clk)
- reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ckih_clk)
- reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == mpll_clk.parent)
- reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == spll_clk.parent)
- reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &mpll_clk)
- reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &spll_clk)
- reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &cpu_clk)
- reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ahb_clk)
- reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ipg_clk)
- reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[0])
- reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[1])
- reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[2])
- reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[3])
- reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi1_clk[0])
- reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi2_clk[0])
- reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &nfc_clk)
- reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &mstick1_clk)
- reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &vpu_clk)
- reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &usb_clk[0])
- reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
- else
- return -EINVAL;
-
- __raw_writel(reg, CCM_CCSR);
-
- return 0;
-}
-
-static int _clk_clko_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN;
- __raw_writel(reg, CCM_PCDR0);
-
- return 0;
-}
-
-static void _clk_clko_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN;
- __raw_writel(reg, CCM_PCDR0);
-}
-
-static struct clk clko_clk = {
- .name = "clko_clk",
- .get_rate = _clk_clko_recalc,
- .set_rate = _clk_clko_set_rate,
- .round_rate = _clk_clko_round_rate,
- .set_parent = _clk_clko_set_parent,
- .enable = _clk_clko_enable,
- .disable = _clk_clko_disable,
-};
-
-static struct clk *mxc_clks[] = {
- &ckih_clk,
- &ckil_clk,
- &mpll_clk,
- &mpll_main_clk[0],
- &mpll_main_clk[1],
- &spll_clk,
- &cpu_clk,
- &ahb_clk,
- &ipg_clk,
- &per_clk[0],
- &per_clk[1],
- &per_clk[2],
- &per_clk[3],
- &clko_clk,
- &uart1_clk[0],
- &uart1_clk[1],
- &uart2_clk[0],
- &uart2_clk[1],
- &uart3_clk[0],
- &uart3_clk[1],
- &uart4_clk[0],
- &uart4_clk[1],
- &uart5_clk[0],
- &uart5_clk[1],
- &uart6_clk[0],
- &uart6_clk[1],
- &gpt1_clk[0],
- &gpt1_clk[1],
- &gpt2_clk[0],
- &gpt2_clk[1],
- &gpt3_clk[0],
- &gpt3_clk[1],
- &gpt4_clk[0],
- &gpt4_clk[1],
- &gpt5_clk[0],
- &gpt5_clk[1],
- &gpt6_clk[0],
- &gpt6_clk[1],
- &pwm_clk[0],
- &pwm_clk[1],
- &sdhc1_clk[0],
- &sdhc1_clk[1],
- &sdhc2_clk[0],
- &sdhc2_clk[1],
- &sdhc3_clk[0],
- &sdhc3_clk[1],
- &cspi1_clk[0],
- &cspi1_clk[1],
- &cspi2_clk[0],
- &cspi2_clk[1],
- &cspi3_clk[0],
- &cspi3_clk[1],
- &lcdc_clk[0],
- &lcdc_clk[1],
- &lcdc_clk[2],
- &csi_clk[0],
- &csi_clk[1],
- &usb_clk[0],
- &usb_clk[1],
- &ssi1_clk[0],
- &ssi1_clk[1],
- &ssi2_clk[0],
- &ssi2_clk[1],
- &nfc_clk,
- &vpu_clk,
- &dma_clk,
- &rtic_clk,
- &brom_clk,
- &emma_clk,
- &slcdc_clk,
- &fec_clk,
- &emi_clk,
- &sahara2_clk,
- &ata_clk,
- &mstick1_clk,
- &wdog_clk,
- &gpio_clk,
- &i2c_clk[0],
- &i2c_clk[1],
- &iim_clk,
- &kpp_clk,
- &owire_clk,
- &rtc_clk,
- &scc_clk,
-};
-
-void __init change_external_low_reference(unsigned long new_ref)
-{
- external_low_reference = new_ref;
-}
-
-unsigned long __init clk_early_get_timer_rate(void)
-{
- return clk_get_rate(&per_clk[0]);
-}
-
-static void __init probe_mxc_clocks(void)
-{
- int i;
+ unsigned long cscr = __raw_readl(CCM_CSCR);
if (mx27_revision() >= CHIP_REV_2_0) {
- if (CSCR() & 0x8000)
- cpu_clk.parent = &mpll_main_clk[0];
+ if (cscr & CCM_CSCR_ARM_SRC)
+ cpu_clk.parent = &mpll_main1_clk;
- if (!(CSCR() & 0x00800000))
- ssi2_clk[0].parent = &spll_clk;
+ if (!(cscr & CCM_CSCR_SSI2))
+ ssi1_clk.parent = &spll_clk;
- if (!(CSCR() & 0x00400000))
- ssi1_clk[0].parent = &spll_clk;
+ if (!(cscr & CCM_CSCR_SSI1))
+ ssi1_clk.parent = &spll_clk;
- if (!(CSCR() & 0x00200000))
+ if (!(cscr & CCM_CSCR_VPU))
vpu_clk.parent = &spll_clk;
} else {
cpu_clk.parent = &mpll_clk;
@@ -1565,11 +693,13 @@
cpu_clk.set_rate = NULL;
ahb_clk.parent = &mpll_clk;
- for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++)
- per_clk[i].parent = &mpll_clk;
+ per1_clk.parent = &mpll_clk;
+ per2_clk.parent = &mpll_clk;
+ per3_clk.parent = &mpll_clk;
+ per4_clk.parent = &mpll_clk;
- ssi1_clk[0].parent = &mpll_clk;
- ssi2_clk[0].parent = &mpll_clk;
+ ssi1_clk.parent = &mpll_clk;
+ ssi2_clk.parent = &mpll_clk;
vpu_clk.parent = &mpll_clk;
}
@@ -1579,47 +709,47 @@
* must be called very early to get information about the
* available clock rate when the timer framework starts
*/
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx27_clocks_init(unsigned long fref)
{
- u32 cscr;
- struct clk **clkp;
+ u32 cscr = __raw_readl(CCM_CSCR);
+ int i;
external_high_reference = fref;
- /* detect clock reference for both system PLL */
- cscr = CSCR();
+ /* detect clock reference for both system PLLs */
if (cscr & CCM_CSCR_MCU)
mpll_clk.parent = &ckih_clk;
else
- mpll_clk.parent = &ckil_clk;
+ mpll_clk.parent = &fpm_clk;
if (cscr & CCM_CSCR_SP)
spll_clk.parent = &ckih_clk;
else
- spll_clk.parent = &ckil_clk;
+ spll_clk.parent = &fpm_clk;
- probe_mxc_clocks();
+ to2_adjust_clocks();
- per_clk[0].enable(&per_clk[0]);
- gpt1_clk[1].enable(&gpt1_clk[1]);
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
- for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
- clk_register(*clkp);
+ /* Turn off all clocks we do not need */
+ __raw_writel(0, CCM_PCCR0);
+ __raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
- /* Turn off all possible clocks */
- __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0);
- __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK,
- CCM_PCCR1);
spll_clk.disable(&spll_clk);
- /* This will propagate to all children and init all the clock rates */
-
- clk_enable(&emi_clk);
+ /* enable basic clocks */
+ clk_enable(&per1_clk);
clk_enable(&gpio_clk);
+ clk_enable(&emi_clk);
clk_enable(&iim_clk);
- clk_enable(&gpt1_clk[0]);
+
#ifdef CONFIG_DEBUG_LL_CONSOLE
- clk_enable(&uart1_clk[0]);
+ clk_enable(&uart1_clk);
#endif
+
+ mxc_timer_init(&gpt1_clk);
+
return 0;
}
+
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index 239308f..d9e3bf9 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -26,11 +26,11 @@
#include <mach/hardware.h>
-#include "crm_regs.h"
-
static int cpu_silicon_rev = -1;
static int cpu_partnumber;
+#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
+
static void query_silicon_parameter(void)
{
u32 val;
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index 94644cd..749de76 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -38,42 +38,36 @@
#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-#define CCM_CSCR_USB_OFFSET 28
-#define CCM_CSCR_USB_MASK (0x7 << 28)
+#define CCM_CSCR_PRESC_OFFSET 29
+#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET 26
+#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
#define CCM_CSCR_SD_OFFSET 24
-#define CCM_CSCR_SD_MASK (0x3 << 24)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI2_OFFSET 23
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_SSI1_OFFSET 22
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_VPU_OFFSET 21
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES (1 << 22)
+#define CCM_CSCR_MPLLRES (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET 20
+#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET 19
+#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET 18
+#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_ARM_SRC (1 << 15)
-#define CCM_CSCR_ARM_OFFSET 12
-#define CCM_CSCR_ARM_MASK (0x3 << 12)
-/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_PRESC_OFFSET 13
-#define CCM_CSCR_PRESC_MASK (0x7 << 13)
-#define CCM_CSCR_BCLK_OFFSET 9
-#define CCM_CSCR_BCLK_MASK (0xf << 9)
-#define CCM_CSCR_IPDIV_OFFSET 8
-#define CCM_CSCR_IPDIV (1 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
-#define CCM_CSCR_AHB_OFFSET 8
-#define CCM_CSCR_AHB_MASK (0x3 << 8)
-/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/
+#define CCM_CSCR_BCLK_OFFSET 10
+#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET 9
+#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
+
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN 1
+
+
#define CCM_MPCTL0_CPLM (1 << 31)
#define CCM_MPCTL0_PD_OFFSET 26
#define CCM_MPCTL0_PD_MASK (0xf << 26)
@@ -109,25 +103,14 @@
#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
-#define CCM_PCDR0_CLKO_EN 25
-#define CCM_PCDR0_CLKODIV_OFFSET 22
-#define CCM_PCDR0_CLKODIV_MASK (0x7 << 22)
#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
-/*The difinition for i.MX27 TO2*/
-#define CCM_PCDR0_VPUDIV2_OFFSET 10
-#define CCM_PCDR0_VPUDIV2_MASK (0x3f << 10)
-#define CCM_PCDR0_NFCDIV2_OFFSET 6
-#define CCM_PCDR0_NFCDIV2_MASK (0xf << 6)
-#define CCM_PCDR0_MSHCDIV2_MASK 0x3f
-/*The difinition for i.MX27 TO2*/
#define CCM_PCDR0_NFCDIV_OFFSET 12
#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
-#define CCM_PCDR0_VPUDIV_OFFSET 8
-#define CCM_PCDR0_VPUDIV_MASK (0xf << 8)
-#define CCM_PCDR0_MSHCDIV_OFFSET 0
-#define CCM_PCDR0_MSHCDIV_MASK 0x1f
-
+#define CCM_PCDR0_48MDIV_OFFSET 5
+#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET 0
+#define CCM_PCDR0_FIRIDIV_MASK 0x1f
#define CCM_PCDR1_PERDIV4_OFFSET 24
#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
#define CCM_PCDR1_PERDIV3_OFFSET 16
@@ -137,133 +120,135 @@
#define CCM_PCDR1_PERDIV1_OFFSET 0
#define CCM_PCDR1_PERDIV1_MASK 0x3f
-#define CCM_PCCR0_CSPI1_OFFSET 31
-#define CCM_PCCR0_CSPI1_MASK (1 << 31)
-#define CCM_PCCR0_CSPI2_OFFSET 30
-#define CCM_PCCR0_CSPI2_MASK (1 << 30)
-#define CCM_PCCR0_CSPI3_OFFSET 29
-#define CCM_PCCR0_CSPI3_MASK (1 << 29)
-#define CCM_PCCR0_DMA_OFFSET 28
-#define CCM_PCCR0_DMA_MASK (1 << 28)
-#define CCM_PCCR0_EMMA_OFFSET 27
-#define CCM_PCCR0_EMMA_MASK (1 << 27)
-#define CCM_PCCR0_FEC_OFFSET 26
-#define CCM_PCCR0_FEC_MASK (1 << 26)
-#define CCM_PCCR0_GPIO_OFFSET 25
-#define CCM_PCCR0_GPIO_MASK (1 << 25)
-#define CCM_PCCR0_GPT1_OFFSET 24
-#define CCM_PCCR0_GPT1_MASK (1 << 24)
-#define CCM_PCCR0_GPT2_OFFSET 23
-#define CCM_PCCR0_GPT2_MASK (1 << 23)
-#define CCM_PCCR0_GPT3_OFFSET 22
-#define CCM_PCCR0_GPT3_MASK (1 << 22)
-#define CCM_PCCR0_GPT4_OFFSET 21
-#define CCM_PCCR0_GPT4_MASK (1 << 21)
-#define CCM_PCCR0_GPT5_OFFSET 20
-#define CCM_PCCR0_GPT5_MASK (1 << 20)
-#define CCM_PCCR0_GPT6_OFFSET 19
-#define CCM_PCCR0_GPT6_MASK (1 << 19)
-#define CCM_PCCR0_I2C1_OFFSET 18
-#define CCM_PCCR0_I2C1_MASK (1 << 18)
-#define CCM_PCCR0_I2C2_OFFSET 17
-#define CCM_PCCR0_I2C2_MASK (1 << 17)
-#define CCM_PCCR0_IIM_OFFSET 16
-#define CCM_PCCR0_IIM_MASK (1 << 16)
-#define CCM_PCCR0_KPP_OFFSET 15
-#define CCM_PCCR0_KPP_MASK (1 << 15)
-#define CCM_PCCR0_LCDC_OFFSET 14
-#define CCM_PCCR0_LCDC_MASK (1 << 14)
-#define CCM_PCCR0_MSHC_OFFSET 13
-#define CCM_PCCR0_MSHC_MASK (1 << 13)
-#define CCM_PCCR0_OWIRE_OFFSET 12
-#define CCM_PCCR0_OWIRE_MASK (1 << 12)
-#define CCM_PCCR0_PWM_OFFSET 11
-#define CCM_PCCR0_PWM_MASK (1 << 11)
-#define CCM_PCCR0_RTC_OFFSET 9
-#define CCM_PCCR0_RTC_MASK (1 << 9)
-#define CCM_PCCR0_RTIC_OFFSET 8
-#define CCM_PCCR0_RTIC_MASK (1 << 8)
-#define CCM_PCCR0_SAHARA_OFFSET 7
-#define CCM_PCCR0_SAHARA_MASK (1 << 7)
-#define CCM_PCCR0_SCC_OFFSET 6
-#define CCM_PCCR0_SCC_MASK (1 << 6)
-#define CCM_PCCR0_SDHC1_OFFSET 5
-#define CCM_PCCR0_SDHC1_MASK (1 << 5)
-#define CCM_PCCR0_SDHC2_OFFSET 4
-#define CCM_PCCR0_SDHC2_MASK (1 << 4)
-#define CCM_PCCR0_SDHC3_OFFSET 3
-#define CCM_PCCR0_SDHC3_MASK (1 << 3)
-#define CCM_PCCR0_SLCDC_OFFSET 2
-#define CCM_PCCR0_SLCDC_MASK (1 << 2)
-#define CCM_PCCR0_SSI1_IPG_OFFSET 1
-#define CCM_PCCR0_SSI1_IPG_MASK (1 << 1)
-#define CCM_PCCR0_SSI2_IPG_OFFSET 0
-#define CCM_PCCR0_SSI2_IPG_MASK (1 << 0)
+#define CCM_PCCR_HCLK_CSI_OFFSET 31
+#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET 30
+#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET 28
+#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET 27
+#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET 26
+#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
+#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
+#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET 23
+#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET 22
+#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET 21
+#define CCM_PCCR_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET 20
+#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET 19
+#define CCM_PCCR_NFC_REG CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET 18
+#define CCM_PCCR_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET 17
+#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET 16
+#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET 15
+#define CCM_PCCR_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET 14
+#define CCM_PCCR_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET 13
+#define CCM_PCCR_DMA_REG CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET 12
+#define CCM_PCCR_I2C1_REG CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET 11
+#define CCM_PCCR_GPIO_REG CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET 10
+#define CCM_PCCR_SDHC2_REG CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET 9
+#define CCM_PCCR_SDHC1_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET 8
+#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET 7
+#define CCM_PCCR_SSI2_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET 6
+#define CCM_PCCR_SSI1_REG CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET 5
+#define CCM_PCCR_CSPI2_REG CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET 4
+#define CCM_PCCR_CSPI1_REG CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET 3
+#define CCM_PCCR_UART4_REG CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET 2
+#define CCM_PCCR_UART3_REG CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET 1
+#define CCM_PCCR_UART2_REG CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET 0
+#define CCM_PCCR_UART1_REG CCM_PCCR0
-#define CCM_PCCR1_UART1_OFFSET 31
-#define CCM_PCCR1_UART1_MASK (1 << 31)
-#define CCM_PCCR1_UART2_OFFSET 30
-#define CCM_PCCR1_UART2_MASK (1 << 30)
-#define CCM_PCCR1_UART3_OFFSET 29
-#define CCM_PCCR1_UART3_MASK (1 << 29)
-#define CCM_PCCR1_UART4_OFFSET 28
-#define CCM_PCCR1_UART4_MASK (1 << 28)
-#define CCM_PCCR1_UART5_OFFSET 27
-#define CCM_PCCR1_UART5_MASK (1 << 27)
-#define CCM_PCCR1_UART6_OFFSET 26
-#define CCM_PCCR1_UART6_MASK (1 << 26)
-#define CCM_PCCR1_USBOTG_OFFSET 25
-#define CCM_PCCR1_USBOTG_MASK (1 << 25)
-#define CCM_PCCR1_WDT_OFFSET 24
-#define CCM_PCCR1_WDT_MASK (1 << 24)
-#define CCM_PCCR1_HCLK_ATA_OFFSET 23
-#define CCM_PCCR1_HCLK_ATA_MASK (1 << 23)
-#define CCM_PCCR1_HCLK_BROM_OFFSET 22
-#define CCM_PCCR1_HCLK_BROM_MASK (1 << 22)
-#define CCM_PCCR1_HCLK_CSI_OFFSET 21
-#define CCM_PCCR1_HCLK_CSI_MASK (1 << 21)
-#define CCM_PCCR1_HCLK_DMA_OFFSET 20
-#define CCM_PCCR1_HCLK_DMA_MASK (1 << 20)
-#define CCM_PCCR1_HCLK_EMI_OFFSET 19
-#define CCM_PCCR1_HCLK_EMI_MASK (1 << 19)
-#define CCM_PCCR1_HCLK_EMMA_OFFSET 18
-#define CCM_PCCR1_HCLK_EMMA_MASK (1 << 18)
-#define CCM_PCCR1_HCLK_FEC_OFFSET 17
-#define CCM_PCCR1_HCLK_FEC_MASK (1 << 17)
-#define CCM_PCCR1_HCLK_VPU_OFFSET 16
-#define CCM_PCCR1_HCLK_VPU_MASK (1 << 16)
-#define CCM_PCCR1_HCLK_LCDC_OFFSET 15
-#define CCM_PCCR1_HCLK_LCDC_MASK (1 << 15)
-#define CCM_PCCR1_HCLK_RTIC_OFFSET 14
-#define CCM_PCCR1_HCLK_RTIC_MASK (1 << 14)
-#define CCM_PCCR1_HCLK_SAHARA_OFFSET 13
-#define CCM_PCCR1_HCLK_SAHARA_MASK (1 << 13)
-#define CCM_PCCR1_HCLK_SLCDC_OFFSET 12
-#define CCM_PCCR1_HCLK_SLCDC_MASK (1 << 12)
-#define CCM_PCCR1_HCLK_USBOTG_OFFSET 11
-#define CCM_PCCR1_HCLK_USBOTG_MASK (1 << 11)
-#define CCM_PCCR1_PERCLK1_OFFSET 10
-#define CCM_PCCR1_PERCLK1_MASK (1 << 10)
-#define CCM_PCCR1_PERCLK2_OFFSET 9
-#define CCM_PCCR1_PERCLK2_MASK (1 << 9)
-#define CCM_PCCR1_PERCLK3_OFFSET 8
-#define CCM_PCCR1_PERCLK3_MASK (1 << 8)
-#define CCM_PCCR1_PERCLK4_OFFSET 7
-#define CCM_PCCR1_PERCLK4_MASK (1 << 7)
-#define CCM_PCCR1_VPU_BAUD_OFFSET 6
-#define CCM_PCCR1_VPU_BAUD_MASK (1 << 6)
-#define CCM_PCCR1_SSI1_BAUD_OFFSET 5
-#define CCM_PCCR1_SSI1_BAUD_MASK (1 << 5)
-#define CCM_PCCR1_SSI2_BAUD_OFFSET 4
-#define CCM_PCCR1_SSI2_BAUD_MASK (1 << 4)
-#define CCM_PCCR1_NFC_BAUD_OFFSET 3
-#define CCM_PCCR1_NFC_BAUD_MASK (1 << 3)
-#define CCM_PCCR1_MSHC_BAUD_OFFSET 2
-#define CCM_PCCR1_MSHC_BAUD_MASK (1 << 2)
+#define CCM_PCCR_OWIRE_OFFSET 31
+#define CCM_PCCR_OWIRE_REG CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET 30
+#define CCM_PCCR_KPP_REG CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET 29
+#define CCM_PCCR_RTC_REG CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET 28
+#define CCM_PCCR_PWM_REG CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET 27
+#define CCM_PCCR_GPT3_REG CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET 26
+#define CCM_PCCR_GPT2_REG CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET 25
+#define CCM_PCCR_GPT1_REG CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET 24
+#define CCM_PCCR_WDT_REG CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET 23
+#define CCM_PCCR_CSPI3_REG CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
+
#define CCM_CCSR_32KSR (1 << 15)
+
#define CCM_CCSR_CLKMODE1 (1 << 9)
#define CCM_CCSR_CLKMODE0 (1 << 8)
+
#define CCM_CCSR_CLKOSEL_OFFSET 0
#define CCM_CCSR_CLKOSEL_MASK 0x1f
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 2f9240b..f81aa8a 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -34,6 +34,10 @@
#include <mach/irqs.h>
#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
/*
* Resource definition for the MXC IrDA
@@ -225,37 +229,217 @@
.resource = mxc_nand_resources,
};
+#ifdef CONFIG_FB_IMX
+/*
+ * lcdc:
+ * - i.MX1: the basic controller
+ * - i.MX21: to be checked
+ * - i.MX27: like i.MX1, with slightly variations
+ */
+static struct resource mxc_fb[] = {
+ {
+ .start = LCDC_BASE_ADDR,
+ .end = LCDC_BASE_ADDR + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_LCDC,
+ .end = MXC_INT_LCDC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* mxc lcd driver */
+struct platform_device mxc_fb_device = {
+ .name = "imx-fb",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fb),
+ .resource = mxc_fb,
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
+#endif
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_fec_resources[] = {
+ {
+ .start = FEC_BASE_ADDR,
+ .end = FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MXC_INT_FEC,
+ .end = MXC_INT_FEC,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mxc_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fec_resources),
+ .resource = mxc_fec_resources,
+};
+#endif
+
+static struct resource mxc_i2c_1_resources[] = {
+ [0] = {
+ .start = I2C_BASE_ADDR,
+ .end = I2C_BASE_ADDR + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_I2C,
+ .end = MXC_INT_I2C,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device mxc_i2c_device0 = {
+ .name = "imx-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+ .resource = mxc_i2c_1_resources
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_i2c_2_resources[] = {
+ [0] = {
+ .start = I2C2_BASE_ADDR,
+ .end = I2C2_BASE_ADDR + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_I2C2,
+ .end = MXC_INT_I2C2,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device mxc_i2c_device1 = {
+ .name = "imx-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+ .resource = mxc_i2c_2_resources
+};
+#endif
+
+static struct resource mxc_pwm_resources[] = {
+ [0] = {
+ .start = PWM_BASE_ADDR,
+ .end = PWM_BASE_ADDR + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXC_INT_PWM,
+ .end = MXC_INT_PWM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device mxc_pwm_device = {
+ .name = "mxc_pwm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_pwm_resources),
+ .resource = mxc_pwm_resources
+};
+
+/*
+ * Resource definition for the MXC SDHC
+ */
+static struct resource mxc_sdhc1_resources[] = {
+ [0] = {
+ .start = SDHC1_BASE_ADDR,
+ .end = SDHC1_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MXC_INT_SDHC1,
+ .end = MXC_INT_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DMA_REQ_SDHC1,
+ .end = DMA_REQ_SDHC1,
+ .flags = IORESOURCE_DMA
+ },
+};
+
+static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device0 = {
+ .name = "mxc-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mxc_sdhc1_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+ .resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_sdhc2_resources[] = {
+ [0] = {
+ .start = SDHC2_BASE_ADDR,
+ .end = SDHC2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MXC_INT_SDHC2,
+ .end = MXC_INT_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DMA_REQ_SDHC2,
+ .end = DMA_REQ_SDHC2,
+ .flags = IORESOURCE_DMA
+ },
+};
+
+static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
+
+struct platform_device mxc_sdhc_device1 = {
+ .name = "mxc-mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mxc_sdhc2_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(mxc_sdhc2_resources),
+ .resource = mxc_sdhc2_resources,
+};
+
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
},
[1] = {
.chip.label = "gpio-1",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
},
[2] = {
.chip.label = "gpio-2",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
},
[3] = {
.chip.label = "gpio-3",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
},
[4] = {
.chip.label = "gpio-4",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
},
[5] = {
.chip.label = "gpio-5",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
}
};
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 1e8cb57..049005b 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,4 +1,3 @@
-
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
extern struct platform_device mxc_gpt3;
@@ -14,3 +13,10 @@
extern struct platform_device mxc_uart_device5;
extern struct platform_device mxc_w1_master_device;
extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index dea6521..bd51dd0 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -21,6 +21,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 2b5c67f..4a3b097 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -31,7 +31,7 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
#include <mach/board-mx27ads.h>
#include "devices.h"
@@ -135,6 +135,7 @@
{
mxc_gpio_release_multiple_pins(mxc_uart3_pins,
ARRAY_SIZE(mxc_uart3_pins));
+ return 0;
}
static int mxc_uart4_pins[] = {
@@ -179,6 +180,7 @@
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
+ &mxc_fec_device,
};
static int mxc_fec_pins[] = {
@@ -196,7 +198,7 @@
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_CLR,
+ PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN
@@ -208,12 +210,6 @@
ARRAY_SIZE(mxc_fec_pins), "FEC");
}
-static void gpio_fec_inactive(void)
-{
- mxc_gpio_release_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins));
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
.init = uart_mxc_port0_init,
@@ -263,11 +259,10 @@
if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
fref = 27000000;
- mxc_clocks_init(fref);
- mxc_timer_init("gpt_clk.0");
+ mx27_clocks_init(fref);
}
-struct sys_timer mx27ads_timer = {
+static struct sys_timer mx27ads_timer = {
.init = mx27ads_timer_init,
};
@@ -280,7 +275,7 @@
},
};
-void __init mx27ads_map_io(void)
+static void __init mx27ads_map_io(void)
{
mxc_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index dfd4156..aa4eaa6 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -20,11 +20,18 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
#include <asm/mach/time.h>
#include <mach/imx-uart.h>
#include <mach/board-pcm038.h>
@@ -121,10 +128,10 @@
return 0;
}
-static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
+static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
- PE9_PF_UART3_RXD };
+ PE11_PF_UART3_RTS };
static int uart_mxc_port2_init(struct platform_device *pdev)
{
@@ -170,7 +177,7 @@
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_CLR,
+ PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN
@@ -182,12 +189,6 @@
ARRAY_SIZE(mxc_fec_pins), "FEC");
}
-static void gpio_fec_inactive(void)
-{
- mxc_gpio_release_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins));
-}
-
static struct mxc_nand_platform_data pcm038_nand_board_info = {
.width = 1,
.hw_ecc = 1,
@@ -196,6 +197,7 @@
static struct platform_device *platform_devices[] __initdata = {
&pcm038_nor_mtd_device,
&mxc_w1_master_device,
+ &mxc_fec_device,
&pcm038_sram_mtd_device,
};
@@ -208,6 +210,51 @@
__raw_writel(0x22220a00, CSCR_A(1));
}
+#ifdef CONFIG_I2C_IMX
+static int mxc_i2c1_pins[] = {
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL
+};
+
+static int pcm038_i2c_1_init(struct device *dev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
+ "I2C1");
+}
+
+static void pcm038_i2c_1_exit(struct device *dev)
+{
+ mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
+}
+
+static struct imxi2c_platform_data pcm038_i2c_1_data = {
+ .bitrate = 100000,
+ .init = pcm038_i2c_1_init,
+ .exit = pcm038_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+ [0] = {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ },
+ [1] = {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563"
+ },
+ [2] = {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ .type = "lm75"
+ }
+};
+#endif
+
static void __init pcm038_init(void)
{
gpio_fec_active();
@@ -217,9 +264,17 @@
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
+ mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+#ifdef CONFIG_I2C_IMX
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pcm038_i2c_devices,
+ ARRAY_SIZE(pcm038_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+#endif
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -229,11 +284,10 @@
static void __init pcm038_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("gpt_clk.0");
+ mx27_clocks_init(26000000);
}
-struct sys_timer pcm038_timer = {
+static struct sys_timer pcm038_timer = {
.init = pcm038_timer_init,
};
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index a560cd6..bf4e520 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,9 +17,138 @@
*/
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
+static int pcm970_sdhc2_pins[] = {
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
+ ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
+ if(ret)
+ return ret;
+
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ "imx-mmc-detect", data);
+ if (ret)
+ goto out_release_gpio;
+
+ set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+
+ ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
+ if (ret)
+ goto out_release_gpio;
+
+ mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
+ gpio_direction_input(GPIO_PORTC + 28);
+
+ return 0;
+
+out_release_gpio:
+ mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+ ARRAY_SIZE(pcm970_sdhc2_pins));
+ return ret;
+}
+
+static void pcm970_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOC(29), data);
+ gpio_free(GPIO_PORTC + 28);
+ mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
+ ARRAY_SIZE(pcm970_sdhc2_pins));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .get_ro = pcm970_sdhc2_get_ro,
+ .init = pcm970_sdhc2_init,
+ .exit = pcm970_sdhc2_exit,
+};
+
+static int mxc_fb_pins[] = {
+ PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
+ PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
+ PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
+ PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
+ PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
+ PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
+ PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
+};
+
+static int pcm038_fb_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
+ ARRAY_SIZE(mxc_fb_pins), "FB");
+}
+
+static int pcm038_fb_exit(struct platform_device *pdev)
+{
+ mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
+
+ return 0;
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DH06
+ */
+static struct imx_fb_platform_data pcm038_fb_data = {
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 7,
+ .left_margin = 5,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .fixed_screen_cpu = 0,
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock not inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xFA0080C0,
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .init = pcm038_fb_init,
+ .exit = pcm038_fb_exit,
+};
+
/*
* system init for baseboard usage. Will be called by pcm038 init.
*
@@ -28,4 +157,6 @@
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 16debc2..40a485c 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -22,6 +22,7 @@
#include <linux/serial.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
+#include "devices.h"
static struct resource uart0[] = {
{
@@ -99,6 +100,7 @@
.num_resources = ARRAY_SIZE(uart3),
};
+#ifdef CONFIG_MACH_MX27
static struct resource uart4[] = {
{
.start = UART5_BASE_ADDR,
@@ -136,3 +138,4 @@
.resource = uart5,
.num_resources = ARRAY_SIZE(uart5),
};
+#endif
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 7b82697..92c79d4 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -46,7 +46,7 @@
/*
* Reset the system. It is called by machine_restart().
*/
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
{
struct clk *clk;
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index e79659e..d623558 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,21 +1,40 @@
-menu "MX3 Options"
- depends on ARCH_MX3
+if ARCH_MX3
+
+config ARCH_MX31
+ bool
+
+config ARCH_MX35
+ bool
+
+comment "MX3 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
+ select ARCH_MX31
default y
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31ADS_WM1133_EV1
+ bool "Support Wolfson Microelectronics 1133-EV1 module"
+ depends on MACH_MX31ADS
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ Include support for the Wolfson Microelectronics 1133-EV1 PMU
+ and audio module for the MX31ADS platform.
+
config MACH_PCM037
- bool "Support Phytec pcm037 platforms"
+ bool "Support Phytec pcm037 (i.MX31) platforms"
+ select ARCH_MX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
+ select ARCH_MX31
default n
help
Include support for MX31 LITEKIT platform. This includes specific
@@ -23,6 +42,7 @@
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
+ select ARCH_MX31
default n
help
Include support for MX31PDK (3DS) platform. This includes specific
@@ -30,10 +50,18 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
+ select ARCH_MX31
default n
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
-endmenu
+config MACH_QONG
+ bool "Support Dave/DENX QongEVB-LITE platform"
+ select ARCH_MX31
+ default n
+ help
+ Include support for Dave/DENX QongEVB-LITE platform. This includes
+ specific configurations for the board and its peripherals.
+endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5a15154..272c8a9 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,9 +4,13 @@
# Object file lists.
-obj-y := mm.o clock.o devices.o iomux.o
+obj-y := mm.o devices.o
+obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
+obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
+ mx31moboard-marxbot.o
+obj-$(CONFIG_MACH_QONG) += qong.o
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
new file mode 100644
index 0000000..53a112d
--- /dev/null
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -0,0 +1,487 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+
+#define CCM_CCMR 0x00
+#define CCM_PDR0 0x04
+#define CCM_PDR1 0x08
+#define CCM_PDR2 0x0C
+#define CCM_PDR3 0x10
+#define CCM_PDR4 0x14
+#define CCM_RCSR 0x18
+#define CCM_MPCTL 0x1C
+#define CCM_PPCTL 0x20
+#define CCM_ACMR 0x24
+#define CCM_COSR 0x28
+#define CCM_CGR0 0x2C
+#define CCM_CGR1 0x30
+#define CCM_CGR2 0x34
+#define CCM_CGR3 0x38
+
+#ifdef HAVE_SET_RATE_SUPPORT
+static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
+{
+ u32 min_pre, temp_pre, old_err, err;
+
+ min_pre = (div - 1) / maxpost + 1;
+ old_err = 8;
+
+ for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+ if (div > (temp_pre * maxpost))
+ break;
+
+ if (div < (temp_pre * temp_pre))
+ continue;
+
+ err = div % temp_pre;
+
+ if (err == 0) {
+ *pre = temp_pre;
+ break;
+ }
+
+ err = temp_pre - err;
+
+ if (err < old_err) {
+ old_err = err;
+ *pre = temp_pre;
+ }
+ }
+
+ *post = (div + *pre - 1) / *pre;
+}
+
+/* get the best values for a 3-bit divider combined with a 6-bit divider */
+static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
+{
+ if (div >= 512) {
+ *pre = 8;
+ *post = 64;
+ } else if (div >= 64) {
+ calc_dividers(div, pre, post, 64);
+ } else if (div <= 8) {
+ *pre = div;
+ *post = 1;
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+
+/* get the best values for two cascaded 3-bit dividers */
+static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
+{
+ if (div >= 64) {
+ *pre = *post = 8;
+ } else if (div > 8) {
+ calc_dividers(div, pre, post, 8);
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+#endif
+
+static unsigned long get_rate_mpll(void)
+{
+ ulong mpctl = __raw_readl(CCM_BASE + CCM_MPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_ppll(void)
+{
+ ulong ppctl = __raw_readl(CCM_BASE + CCM_PPCTL);
+
+ return mxc_decode_pll(ppctl, 24000000);
+}
+
+struct arm_ahb_div {
+ unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+ { .arm = 1, .ahb = 4, .sel = 0},
+ { .arm = 1, .ahb = 3, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 1, .sel = 0},
+ { .arm = 1, .ahb = 5, .sel = 0},
+ { .arm = 1, .ahb = 8, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 1},
+ { .arm = 2, .ahb = 4, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static struct arm_ahb_div clk_automotive[] = {
+ { .arm = 1, .ahb = 3, .sel = 0},
+ { .arm = 1, .ahb = 2, .sel = 1},
+ { .arm = 2, .ahb = 1, .sel = 1},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 0},
+ { .arm = 1, .ahb = 4, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 1},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static unsigned long get_rate_arm(void)
+{
+ unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+ struct arm_ahb_div *aad;
+ unsigned long fref = get_rate_mpll();
+
+ if (pdr0 & 1) {
+ /* consumer path */
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ if (aad->sel)
+ fref = fref * 2 / 3;
+ } else {
+ /* auto path */
+ aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+ if (aad->sel)
+ fref = fref * 3 / 4;
+ }
+ return fref / aad->arm;
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+ unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+ struct arm_ahb_div *aad;
+ unsigned long fref = get_rate_mpll();
+
+ if (pdr0 & 1)
+ /* consumer path */
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ else
+ /* auto path */
+ aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+
+ return fref / aad->ahb;
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+ return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_3_3_div(unsigned long in)
+{
+ return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+ unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+ unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+ unsigned long div = get_3_3_div(pdr4 >> 10);
+
+ if (pdr3 & (1 << 14))
+ return get_rate_arm() / div;
+ else
+ return get_rate_ppll() / div;
+}
+
+static unsigned long get_rate_sdhc(struct clk *clk)
+{
+ unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
+ unsigned long div, rate;
+
+ if (pdr3 & (1 << 6))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ switch (clk->id) {
+ default:
+ case 0:
+ div = pdr3 & 0x3f;
+ break;
+ case 1:
+ div = (pdr3 >> 8) & 0x3f;
+ break;
+ case 2:
+ div = (pdr3 >> 16) & 0x3f;
+ break;
+ }
+
+ return rate / get_3_3_div(div);
+}
+
+static unsigned long get_rate_mshc(struct clk *clk)
+{
+ unsigned long pdr1 = __raw_readl(CCM_BASE + CCM_PDR1);
+ unsigned long div1, div2, rate;
+
+ if (pdr1 & (1 << 7))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ div1 = (pdr1 >> 29) & 0x7;
+ div2 = (pdr1 >> 22) & 0x3f;
+
+ return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_ssi(struct clk *clk)
+{
+ unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+ unsigned long div1, div2, rate;
+
+ if (pdr2 & (1 << 6))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ switch (clk->id) {
+ default:
+ case 0:
+ div1 = pdr2 & 0x3f;
+ div2 = (pdr2 >> 24) & 0x7;
+ break;
+ case 1:
+ div1 = (pdr2 >> 8) & 0x3f;
+ div2 = (pdr2 >> 27) & 0x7;
+ break;
+ }
+
+ return rate / ((div1 + 1) * (div2 + 1));
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+ unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
+ unsigned long rate;
+
+ if (pdr2 & (1 << 7))
+ rate = get_rate_arm();
+ else
+ rate = get_rate_ppll();
+
+ return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+}
+
+static unsigned long get_rate_ipg_per(struct clk *clk)
+{
+ unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
+ unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+ unsigned long div1, div2;
+
+ if (pdr0 & (1 << 26)) {
+ div1 = (pdr4 >> 19) & 0x7;
+ div2 = (pdr4 >> 16) & 0x7;
+ return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+ } else {
+ div1 = (pdr0 >> 12) & 0x7;
+ return get_rate_ahb(NULL) / div1;
+ }
+}
+
+static int clk_cgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 3 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void clk_cgr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(3 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = CCM_BASE + er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = clk_cgr_enable, \
+ .disable = clk_cgr_disable, \
+ }
+
+DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL);
+DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL);
+DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL);
+DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL);
+DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL);
+DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL);
+DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
+DEFINE_CLOCK(esdhc3_clk, 2, CCM_CGR0, 30, get_rate_sdhc, NULL);
+
+DEFINE_CLOCK(fec_clk, 0, CCM_CGR1, 0, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpio1_clk, 0, CCM_CGR1, 2, NULL, NULL);
+DEFINE_CLOCK(gpio2_clk, 1, CCM_CGR1, 4, NULL, NULL);
+DEFINE_CLOCK(gpio3_clk, 2, CCM_CGR1, 6, NULL, NULL);
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGR1, 8, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
+DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL);
+DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL);
+DEFINE_CLOCK(owire_clk, 0, CCM_CGR1, 26, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(pwm_clk, 0, CCM_CGR1, 28, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(rngc_clk, 0, CCM_CGR1, 30, get_rate_ipg, NULL);
+
+DEFINE_CLOCK(rtc_clk, 0, CCM_CGR2, 0, get_rate_ipg, NULL);
+DEFINE_CLOCK(rtic_clk, 0, CCM_CGR2, 2, get_rate_ahb, NULL);
+DEFINE_CLOCK(scc_clk, 0, CCM_CGR2, 4, get_rate_ipg, NULL);
+DEFINE_CLOCK(sdma_clk, 0, CCM_CGR2, 6, NULL, NULL);
+DEFINE_CLOCK(spba_clk, 0, CCM_CGR2, 8, get_rate_ipg, NULL);
+DEFINE_CLOCK(spdif_clk, 0, CCM_CGR2, 10, NULL, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, CCM_CGR2, 12, get_rate_ssi, NULL);
+DEFINE_CLOCK(ssi2_clk, 1, CCM_CGR2, 14, get_rate_ssi, NULL);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk, 1, CCM_CGR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL);
+DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL);
+DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL);
+
+DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL);
+DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL);
+DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "asrc", asrc_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+ _REGISTER_CLOCK(NULL, "can", can1_clk)
+ _REGISTER_CLOCK(NULL, "can", can2_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK(NULL, "ect", ect_clk)
+ _REGISTER_CLOCK(NULL, "edio", edio_clk)
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit1_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK(NULL, "esai", esai_clk)
+ _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
+ _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
+ _REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
+ _REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
+ _REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+ _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
+ _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK(NULL, "mlb", mlb_clk)
+ _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+ _REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK(NULL, "rngc", rngc_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+ _REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+ _REGISTER_CLOCK(NULL, "spba", spba_clk)
+ _REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+ _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK(NULL, "max", max_clk)
+ _REGISTER_CLOCK(NULL, "admux", admux_clk)
+ _REGISTER_CLOCK(NULL, "csi", csi_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+};
+
+int __init mx35_clocks_init()
+{
+ int i;
+ unsigned int ll = 0;
+
+ mxc_set_cpu_type(MXC_CPU_MX35);
+
+#ifdef CONFIG_DEBUG_LL_CONSOLE
+ ll = (3 << 16);
+#endif
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* Turn off all clocks except the ones we need to survive, namely:
+ * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
+ */
+ __raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
+ __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
+ CCM_BASE + CCM_CGR1);
+ __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
+ __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ mxc_timer_init(&gpt_clk);
+
+ return 0;
+}
+
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b1746aa..ca46f48 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,9 +23,13 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
#include <mach/clock.h>
#include <mach/hardware.h>
-#include <asm/div64.h>
+#include <mach/common.h>
#include "crm_regs.h"
@@ -64,17 +68,17 @@
}
static struct clk mcu_pll_clk;
-static struct clk mcu_main_clk;
-static struct clk usb_pll_clk;
static struct clk serial_pll_clk;
static struct clk ipg_clk;
static struct clk ckih_clk;
-static struct clk ahb_clk;
-static int _clk_enable(struct clk *clk)
+static int cgr_enable(struct clk *clk)
{
u32 reg;
+ if (!clk->enable_reg)
+ return 0;
+
reg = __raw_readl(clk->enable_reg);
reg |= 3 << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
@@ -82,133 +86,69 @@
return 0;
}
-static void _clk_disable(struct clk *clk)
+static void cgr_disable(struct clk *clk)
{
u32 reg;
+ if (!clk->enable_reg)
+ return;
+
reg = __raw_readl(clk->enable_reg);
reg &= ~(3 << clk->enable_shift);
+
+ /* special case for EMI clock */
+ if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+ reg |= (1 << clk->enable_shift);
+
__raw_writel(reg, clk->enable_reg);
}
-static void _clk_emi_disable(struct clk *clk)
+static unsigned long pll_ref_get_rate(void)
{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
- reg |= (1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- signed long pd = 1; /* Pre-divider */
- signed long mfi; /* Multiplication Factor (Integer part) */
- signed long mfn; /* Multiplication Factor (Integer part) */
- signed long mfd; /* Multiplication Factor (Denominator Part) */
- signed long tmp;
- u32 ref_freq = clk_get_rate(clk->parent);
-
- while (((ref_freq / pd) * 10) > rate)
- pd++;
-
- if ((ref_freq / pd) < PRE_DIV_MIN_FREQ)
- return -EINVAL;
-
- /* the ref_freq/2 in the following is to round up */
- mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
- if (mfi < 5 || mfi > 15)
- return -EINVAL;
-
- /* pick a mfd value that will work
- * then solve for mfn */
- mfd = ref_freq / 50000;
-
- /*
- * pll_freq * pd * mfd
- * mfn = -------------------- - (mfi * mfd)
- * 2 * ref_freq
- */
- /* the tmp/2 is for rounding */
- tmp = ref_freq / 10000;
- mfn =
- ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
- (mfi * mfd);
-
- mfn = mfn & 0x3ff;
- pd--;
- mfd--;
-
- /* Change the Pll value */
- reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) |
- (mfn << MXC_CCM_PCTL_MFN_OFFSET) |
- (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET);
-
- if (clk == &mcu_pll_clk)
- __raw_writel(reg, MXC_CCM_MPCTL);
- else if (clk == &usb_pll_clk)
- __raw_writel(reg, MXC_CCM_UPCTL);
- else if (clk == &serial_pll_clk)
- __raw_writel(reg, MXC_CCM_SRPCTL);
-
- return 0;
-}
-
-static unsigned long _clk_pll_get_rate(struct clk *clk)
-{
- long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long reg, ccmr;
- s64 temp;
+ unsigned long ccmr;
unsigned int prcs;
ccmr = __raw_readl(MXC_CCM_CCMR);
prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
if (prcs == 0x1)
- ref_clk = CKIL_CLK_FREQ * 1024;
+ return CKIL_CLK_FREQ * 1024;
else
- ref_clk = clk_get_rate(&ckih_clk);
-
- if (clk == &mcu_pll_clk) {
- if ((ccmr & MXC_CCM_CCMR_MPE) == 0)
- return ref_clk;
- if ((ccmr & MXC_CCM_CCMR_MDS) != 0)
- return ref_clk;
- reg = __raw_readl(MXC_CCM_MPCTL);
- } else if (clk == &usb_pll_clk)
- reg = __raw_readl(MXC_CCM_UPCTL);
- else if (clk == &serial_pll_clk)
- reg = __raw_readl(MXC_CCM_SRPCTL);
- else {
- BUG();
- return 0;
- }
-
- pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET;
- mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET;
- mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK;
-
- if (mfn >= 0x200) {
- mfn |= 0xFFFFFE00;
- mfn_abs = -mfn;
- }
-
- ref_clk *= 2;
- ref_clk /= pdf + 1;
-
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd + 1);
- if (mfn < 0)
- temp = -temp;
- temp = (ref_clk * mfi) + temp;
-
- return temp;
+ return clk_get_rate(&ckih_clk);
}
-static int _clk_usb_pll_enable(struct clk *clk)
+static unsigned long usb_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(MXC_CCM_UPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(MXC_CCM_SRPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long mcu_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg, ccmr;
+
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+
+ if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+ return clk_get_rate(&ckih_clk);
+
+ reg = __raw_readl(MXC_CCM_MPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static int usb_pll_enable(struct clk *clk)
{
u32 reg;
@@ -222,7 +162,7 @@
return 0;
}
-static void _clk_usb_pll_disable(struct clk *clk)
+static void usb_pll_disable(struct clk *clk)
{
u32 reg;
@@ -231,7 +171,7 @@
__raw_writel(reg, MXC_CCM_CCMR);
}
-static int _clk_serial_pll_enable(struct clk *clk)
+static int serial_pll_enable(struct clk *clk)
{
u32 reg;
@@ -245,7 +185,7 @@
return 0;
}
-static void _clk_serial_pll_disable(struct clk *clk)
+static void serial_pll_disable(struct clk *clk)
{
u32 reg;
@@ -258,7 +198,7 @@
#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-static unsigned long _clk_mcu_main_get_rate(struct clk *clk)
+static unsigned long mcu_main_get_rate(struct clk *clk)
{
u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
@@ -268,7 +208,7 @@
return clk_get_rate(&mcu_pll_clk);
}
-static unsigned long _clk_hclk_get_rate(struct clk *clk)
+static unsigned long ahb_get_rate(struct clk *clk)
{
unsigned long max_pdf;
@@ -277,7 +217,7 @@
return clk_get_rate(clk->parent) / (max_pdf + 1);
}
-static unsigned long _clk_ipg_get_rate(struct clk *clk)
+static unsigned long ipg_get_rate(struct clk *clk)
{
unsigned long ipg_pdf;
@@ -286,7 +226,7 @@
return clk_get_rate(clk->parent) / (ipg_pdf + 1);
}
-static unsigned long _clk_nfc_get_rate(struct clk *clk)
+static unsigned long nfc_get_rate(struct clk *clk)
{
unsigned long nfc_pdf;
@@ -295,7 +235,7 @@
return clk_get_rate(clk->parent) / (nfc_pdf + 1);
}
-static unsigned long _clk_hsp_get_rate(struct clk *clk)
+static unsigned long hsp_get_rate(struct clk *clk)
{
unsigned long hsp_pdf;
@@ -304,7 +244,7 @@
return clk_get_rate(clk->parent) / (hsp_pdf + 1);
}
-static unsigned long _clk_usb_get_rate(struct clk *clk)
+static unsigned long usb_get_rate(struct clk *clk)
{
unsigned long usb_pdf, usb_prepdf;
@@ -315,7 +255,7 @@
return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
}
-static unsigned long _clk_csi_get_rate(struct clk *clk)
+static unsigned long csi_get_rate(struct clk *clk)
{
u32 reg, pre, post;
@@ -329,7 +269,7 @@
return clk_get_rate(clk->parent) / (pre * post);
}
-static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
{
u32 pre, post, parent = clk_get_rate(clk->parent);
u32 div = parent / rate;
@@ -342,7 +282,7 @@
return parent / (pre * post);
}
-static int _clk_csi_set_rate(struct clk *clk, unsigned long rate)
+static int csi_set_rate(struct clk *clk, unsigned long rate)
{
u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
@@ -363,16 +303,7 @@
return 0;
}
-static unsigned long _clk_per_get_rate(struct clk *clk)
-{
- unsigned long per_pdf;
-
- per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK,
- MXC_CCM_PDR0_PER_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (per_pdf + 1);
-}
-
-static unsigned long _clk_ssi1_get_rate(struct clk *clk)
+static unsigned long ssi1_get_rate(struct clk *clk)
{
unsigned long ssi1_pdf, ssi1_prepdf;
@@ -383,7 +314,7 @@
return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
}
-static unsigned long _clk_ssi2_get_rate(struct clk *clk)
+static unsigned long ssi2_get_rate(struct clk *clk)
{
unsigned long ssi2_pdf, ssi2_prepdf;
@@ -394,7 +325,7 @@
return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
}
-static unsigned long _clk_firi_get_rate(struct clk *clk)
+static unsigned long firi_get_rate(struct clk *clk)
{
unsigned long firi_pdf, firi_prepdf;
@@ -405,7 +336,7 @@
return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
}
-static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
{
u32 pre, post;
u32 parent = clk_get_rate(clk->parent);
@@ -420,7 +351,7 @@
}
-static int _clk_firi_set_rate(struct clk *clk, unsigned long rate)
+static int firi_set_rate(struct clk *clk, unsigned long rate)
{
u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
@@ -441,12 +372,12 @@
return 0;
}
-static unsigned long _clk_mbx_get_rate(struct clk *clk)
+static unsigned long mbx_get_rate(struct clk *clk)
{
return clk_get_rate(clk->parent) / 2;
}
-static unsigned long _clk_mstick1_get_rate(struct clk *clk)
+static unsigned long mstick1_get_rate(struct clk *clk)
{
unsigned long msti_pdf;
@@ -455,7 +386,7 @@
return clk_get_rate(clk->parent) / (msti_pdf + 1);
}
-static unsigned long _clk_mstick2_get_rate(struct clk *clk)
+static unsigned long mstick2_get_rate(struct clk *clk)
{
unsigned long msti_pdf;
@@ -472,661 +403,185 @@
}
static struct clk ckih_clk = {
- .name = "ckih",
.get_rate = clk_ckih_get_rate,
};
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
- .name = "ckil",
- .get_rate = clk_ckil_get_rate,
-};
-
static struct clk mcu_pll_clk = {
- .name = "mcu_pll",
.parent = &ckih_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = _clk_pll_get_rate,
+ .get_rate = mcu_pll_get_rate,
};
static struct clk mcu_main_clk = {
- .name = "mcu_main_clk",
.parent = &mcu_pll_clk,
- .get_rate = _clk_mcu_main_get_rate,
+ .get_rate = mcu_main_get_rate,
};
static struct clk serial_pll_clk = {
- .name = "serial_pll",
.parent = &ckih_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = _clk_pll_get_rate,
- .enable = _clk_serial_pll_enable,
- .disable = _clk_serial_pll_disable,
+ .get_rate = serial_pll_get_rate,
+ .enable = serial_pll_enable,
+ .disable = serial_pll_disable,
};
static struct clk usb_pll_clk = {
- .name = "usb_pll",
.parent = &ckih_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = _clk_pll_get_rate,
- .enable = _clk_usb_pll_enable,
- .disable = _clk_usb_pll_disable,
+ .get_rate = usb_pll_get_rate,
+ .enable = usb_pll_enable,
+ .disable = usb_pll_disable,
};
static struct clk ahb_clk = {
- .name = "ahb_clk",
.parent = &mcu_main_clk,
- .get_rate = _clk_hclk_get_rate,
+ .get_rate = ahb_get_rate,
};
-static struct clk per_clk = {
- .name = "per_clk",
- .parent = &usb_pll_clk,
- .get_rate = _clk_per_get_rate,
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = getsetround##_get_rate, \
+ .set_rate = getsetround##_set_rate, \
+ .round_rate = getsetround##_round_rate, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
+
+DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
+ _REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
+ _REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit1_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mx3-camera.0", "csi", csi_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+ _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+ _REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+ _REGISTER_CLOCK(NULL, "firi", firi_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "rng", rng_clk)
+ _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+ _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+ _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+ _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+ _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
};
-static struct clk perclk_clk = {
- .name = "perclk_clk",
- .parent = &ipg_clk,
-};
-
-static struct clk cspi_clk[] = {
- {
- .name = "cspi_clk",
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "cspi_clk",
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "cspi_clk",
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk ipg_clk = {
- .name = "ipg_clk",
- .parent = &ahb_clk,
- .get_rate = _clk_ipg_get_rate,
-};
-
-static struct clk emi_clk = {
- .name = "emi_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_EMI_OFFSET,
- .disable = _clk_emi_disable,
-};
-
-static struct clk gpt_clk = {
- .name = "gpt_clk",
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_GPT_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR1_PWM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk epit_clk[] = {
- {
- .name = "epit_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "epit_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk nfc_clk = {
- .name = "nfc_clk",
- .parent = &ahb_clk,
- .get_rate = _clk_nfc_get_rate,
-};
-
-static struct clk scc_clk = {
- .name = "scc_clk",
- .parent = &ipg_clk,
-};
-
-static struct clk ipu_clk = {
- .name = "ipu_clk",
- .parent = &mcu_main_clk,
- .get_rate = _clk_hsp_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_IPU_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
- .name = "kpp_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_KPP_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk wdog_clk = {
- .name = "wdog_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET,
- .disable = _clk_disable,
-};
-static struct clk rtc_clk = {
- .name = "rtc_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_RTC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk usb_clk[] = {
- {
- .name = "usb_clk",
- .parent = &usb_pll_clk,
- .get_rate = _clk_usb_get_rate,},
- {
- .name = "usb_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk csi_clk = {
- .name = "csi_clk",
- .parent = &serial_pll_clk,
- .get_rate = _clk_csi_get_rate,
- .round_rate = _clk_csi_round_rate,
- .set_rate = _clk_csi_set_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_CSI_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk uart_clk[] = {
- {
- .name = "uart_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 2,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 3,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "uart_clk",
- .id = 4,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_UART5_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk i2c_clk[] = {
- {
- .name = "i2c_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "i2c_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "i2c_clk",
- .id = 2,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk owire_clk = {
- .name = "owire_clk",
- .parent = &perclk_clk,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
- .enable = _clk_enable,
- .disable = _clk_disable,
-};
-
-static struct clk sdhc_clk[] = {
- {
- .name = "sdhc_clk",
- .id = 0,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "sdhc_clk",
- .id = 1,
- .parent = &perclk_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk ssi_clk[] = {
- {
- .name = "ssi_clk",
- .parent = &serial_pll_clk,
- .get_rate = _clk_ssi1_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "ssi_clk",
- .id = 1,
- .parent = &serial_pll_clk,
- .get_rate = _clk_ssi2_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk firi_clk = {
- .name = "firi_clk",
- .parent = &usb_pll_clk,
- .round_rate = _clk_firi_round_rate,
- .set_rate = _clk_firi_set_rate,
- .get_rate = _clk_firi_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk ata_clk = {
- .name = "ata_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_ATA_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mbx_clk = {
- .name = "mbx_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
- .get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk vpu_clk = {
- .name = "vpu_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_GACC_OFFSET,
- .get_rate = _clk_mbx_get_rate,
-};
-
-static struct clk rtic_clk = {
- .name = "rtic_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR2,
- .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk rng_clk = {
- .name = "rng_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_RNG_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk sdma_clk[] = {
- {
- .name = "sdma_ahb_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "sdma_ipg_clk",
- .parent = &ipg_clk,}
-};
-
-static struct clk mpeg4_clk = {
- .name = "mpeg4_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk vl2cc_clk = {
- .name = "vl2cc_clk",
- .parent = &ahb_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mstick_clk[] = {
- {
- .name = "mstick_clk",
- .id = 0,
- .parent = &usb_pll_clk,
- .get_rate = _clk_mstick1_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET,
- .disable = _clk_disable,},
- {
- .name = "mstick_clk",
- .id = 1,
- .parent = &usb_pll_clk,
- .get_rate = _clk_mstick2_get_rate,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR1,
- .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET,
- .disable = _clk_disable,},
-};
-
-static struct clk iim_clk = {
- .name = "iim_clk",
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = MXC_CCM_CGR0,
- .enable_shift = MXC_CCM_CGR0_IIM_OFFSET,
- .disable = _clk_disable,
-};
-
-static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 div, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
- if (parent % rate)
- div++;
-
- if (div > 8)
- div = 16;
- else if (div > 4)
- div = 8;
- else if (div > 2)
- div = 4;
-
- return parent / div;
-}
-
-static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if (div == 16)
- div = 4;
- else if (div == 8)
- div = 3;
- else if (div == 4)
- div = 2;
- else if (div == 2)
- div = 1;
- else if (div == 1)
- div = 0;
- else
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK;
- reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET;
- __raw_writel(reg, MXC_CCM_COSR);
-
- return 0;
-}
-
-static unsigned long _clk_cko1_get_rate(struct clk *clk)
-{
- u32 div;
-
- div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >>
- MXC_CCM_COSR_CLKOUTDIV_OFFSET;
-
- return clk_get_rate(clk->parent) / (1 << div);
-}
-
-static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent)
+int __init mx31_clocks_init(unsigned long fref)
{
u32 reg;
+ int i;
- reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK;
-
- if (parent == &mcu_main_clk)
- reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ipg_clk)
- reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &usb_pll_clk)
- reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == mcu_main_clk.parent)
- reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ahb_clk)
- reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &serial_pll_clk)
- reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ckih_clk)
- reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &emi_clk)
- reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &ipu_clk)
- reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &nfc_clk)
- reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else if (parent == &uart_clk[0])
- reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_COSR);
-
- return 0;
-}
-
-static int _clk_cko1_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN;
- __raw_writel(reg, MXC_CCM_COSR);
-
- return 0;
-}
-
-static void _clk_cko1_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN;
- __raw_writel(reg, MXC_CCM_COSR);
-}
-
-static struct clk cko1_clk = {
- .name = "cko1_clk",
- .get_rate = _clk_cko1_get_rate,
- .set_rate = _clk_cko1_set_rate,
- .round_rate = _clk_cko1_round_rate,
- .set_parent = _clk_cko1_set_parent,
- .enable = _clk_cko1_enable,
- .disable = _clk_cko1_disable,
-};
-
-static struct clk *mxc_clks[] = {
- &ckih_clk,
- &ckil_clk,
- &mcu_pll_clk,
- &usb_pll_clk,
- &serial_pll_clk,
- &mcu_main_clk,
- &ahb_clk,
- &per_clk,
- &perclk_clk,
- &cko1_clk,
- &emi_clk,
- &cspi_clk[0],
- &cspi_clk[1],
- &cspi_clk[2],
- &ipg_clk,
- &gpt_clk,
- &pwm_clk,
- &wdog_clk,
- &rtc_clk,
- &epit_clk[0],
- &epit_clk[1],
- &nfc_clk,
- &ipu_clk,
- &kpp_clk,
- &usb_clk[0],
- &usb_clk[1],
- &csi_clk,
- &uart_clk[0],
- &uart_clk[1],
- &uart_clk[2],
- &uart_clk[3],
- &uart_clk[4],
- &i2c_clk[0],
- &i2c_clk[1],
- &i2c_clk[2],
- &owire_clk,
- &sdhc_clk[0],
- &sdhc_clk[1],
- &ssi_clk[0],
- &ssi_clk[1],
- &firi_clk,
- &ata_clk,
- &rtic_clk,
- &rng_clk,
- &sdma_clk[0],
- &sdma_clk[1],
- &mstick_clk[0],
- &mstick_clk[1],
- &scc_clk,
- &iim_clk,
-};
-
-int __init mxc_clocks_init(unsigned long fref)
-{
- u32 reg;
- struct clk **clkp;
+ mxc_set_cpu_type(MXC_CPU_MX31);
ckih_rate = fref;
- for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
- clk_register(*clkp);
-
- if (cpu_is_mx31()) {
- clk_register(&mpeg4_clk);
- clk_register(&mbx_clk);
- } else {
- clk_register(&vpu_clk);
- clk_register(&vl2cc_clk);
- }
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
/* Turn off all possible clocks */
- __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0);
+ __raw_writel((3 << 4), MXC_CCM_CGR0);
__raw_writel(0, MXC_CCM_CGR1);
-
- __raw_writel(MXC_CCM_CGR2_EMI_MASK |
- MXC_CCM_CGR2_IPMUX1_MASK |
- MXC_CCM_CGR2_IPMUX2_MASK |
- MXC_CCM_CGR2_MXCCLKENSEL_MASK | /* for MX32 */
- MXC_CCM_CGR2_CHIKCAMPEN_MASK | /* for MX32 */
- MXC_CCM_CGR2_OVRVPUBUSY_MASK | /* for MX32 */
+ __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
MX32, but still required to be set */
MXC_CCM_CGR2);
- clk_disable(&cko1_clk);
- clk_disable(&usb_pll_clk);
+ usb_pll_disable(&usb_pll_clk);
pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
@@ -1143,6 +598,8 @@
__raw_writel(reg, MXC_CCM_PMCR1);
}
+ mxc_timer_init(&ipg_clk);
+
return 0;
}
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index 4a0e0ed..adfa362 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -91,47 +91,6 @@
#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0
#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7
-#define MXC_CCM_PDR0_HSP_DIV_1 (0x0 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_2 (0x1 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_3 (0x2 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_4 (0x3 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_5 (0x4 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_6 (0x5 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_7 (0x6 << 11)
-#define MXC_CCM_PDR0_HSP_DIV_8 (0x7 << 11)
-
-#define MXC_CCM_PDR0_IPG_DIV_1 (0x0 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_2 (0x1 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_3 (0x2 << 6)
-#define MXC_CCM_PDR0_IPG_DIV_4 (0x3 << 6)
-
-#define MXC_CCM_PDR0_MAX_DIV_1 (0x0 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_2 (0x1 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_3 (0x2 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_4 (0x3 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_5 (0x4 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_6 (0x5 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_7 (0x6 << 3)
-#define MXC_CCM_PDR0_MAX_DIV_8 (0x7 << 3)
-
-#define MXC_CCM_PDR0_NFC_DIV_1 (0x0 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_2 (0x1 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_3 (0x2 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_4 (0x3 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_5 (0x4 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_6 (0x5 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_7 (0x6 << 8)
-#define MXC_CCM_PDR0_NFC_DIV_8 (0x7 << 8)
-
-#define MXC_CCM_PDR0_MCU_DIV_1 0x0
-#define MXC_CCM_PDR0_MCU_DIV_2 0x1
-#define MXC_CCM_PDR0_MCU_DIV_3 0x2
-#define MXC_CCM_PDR0_MCU_DIV_4 0x3
-#define MXC_CCM_PDR0_MCU_DIV_5 0x4
-#define MXC_CCM_PDR0_MCU_DIV_6 0x5
-#define MXC_CCM_PDR0_MCU_DIV_7 0x6
-#define MXC_CCM_PDR0_MCU_DIV_8 0x7
-
#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30
#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30)
#define MXC_CCM_PDR1_USB_PODF_OFFSET 27
@@ -152,118 +111,6 @@
/* Bit definitions for RCSR */
#define MXC_CCM_RCSR_NF16B 0x80000000
-/* Bit definitions for both MCU, USB and SR PLL control registers */
-#define MXC_CCM_PCTL_BRM 0x80000000
-#define MXC_CCM_PCTL_PD_OFFSET 26
-#define MXC_CCM_PCTL_PD_MASK (0xF << 26)
-#define MXC_CCM_PCTL_MFD_OFFSET 16
-#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16)
-#define MXC_CCM_PCTL_MFI_OFFSET 10
-#define MXC_CCM_PCTL_MFI_MASK (0xF << 10)
-#define MXC_CCM_PCTL_MFN_OFFSET 0
-#define MXC_CCM_PCTL_MFN_MASK 0x3FF
-
-#define MXC_CCM_CGR0_SD_MMC1_OFFSET 0
-#define MXC_CCM_CGR0_SD_MMC1_MASK (0x3 << 0)
-#define MXC_CCM_CGR0_SD_MMC2_OFFSET 2
-#define MXC_CCM_CGR0_SD_MMC2_MASK (0x3 << 2)
-#define MXC_CCM_CGR0_GPT_OFFSET 4
-#define MXC_CCM_CGR0_GPT_MASK (0x3 << 4)
-#define MXC_CCM_CGR0_EPIT1_OFFSET 6
-#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 6)
-#define MXC_CCM_CGR0_EPIT2_OFFSET 8
-#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 8)
-#define MXC_CCM_CGR0_IIM_OFFSET 10
-#define MXC_CCM_CGR0_IIM_MASK (0x3 << 10)
-#define MXC_CCM_CGR0_ATA_OFFSET 12
-#define MXC_CCM_CGR0_ATA_MASK (0x3 << 12)
-#define MXC_CCM_CGR0_SDMA_OFFSET 14
-#define MXC_CCM_CGR0_SDMA_MASK (0x3 << 14)
-#define MXC_CCM_CGR0_CSPI3_OFFSET 16
-#define MXC_CCM_CGR0_CSPI3_MASK (0x3 << 16)
-#define MXC_CCM_CGR0_RNG_OFFSET 18
-#define MXC_CCM_CGR0_RNG_MASK (0x3 << 18)
-#define MXC_CCM_CGR0_UART1_OFFSET 20
-#define MXC_CCM_CGR0_UART1_MASK (0x3 << 20)
-#define MXC_CCM_CGR0_UART2_OFFSET 22
-#define MXC_CCM_CGR0_UART2_MASK (0x3 << 22)
-#define MXC_CCM_CGR0_SSI1_OFFSET 24
-#define MXC_CCM_CGR0_SSI1_MASK (0x3 << 24)
-#define MXC_CCM_CGR0_I2C1_OFFSET 26
-#define MXC_CCM_CGR0_I2C1_MASK (0x3 << 26)
-#define MXC_CCM_CGR0_I2C2_OFFSET 28
-#define MXC_CCM_CGR0_I2C2_MASK (0x3 << 28)
-#define MXC_CCM_CGR0_I2C3_OFFSET 30
-#define MXC_CCM_CGR0_I2C3_MASK (0x3 << 30)
-
-#define MXC_CCM_CGR1_HANTRO_OFFSET 0
-#define MXC_CCM_CGR1_HANTRO_MASK (0x3 << 0)
-#define MXC_CCM_CGR1_MEMSTICK1_OFFSET 2
-#define MXC_CCM_CGR1_MEMSTICK1_MASK (0x3 << 2)
-#define MXC_CCM_CGR1_MEMSTICK2_OFFSET 4
-#define MXC_CCM_CGR1_MEMSTICK2_MASK (0x3 << 4)
-#define MXC_CCM_CGR1_CSI_OFFSET 6
-#define MXC_CCM_CGR1_CSI_MASK (0x3 << 6)
-#define MXC_CCM_CGR1_RTC_OFFSET 8
-#define MXC_CCM_CGR1_RTC_MASK (0x3 << 8)
-#define MXC_CCM_CGR1_WDOG_OFFSET 10
-#define MXC_CCM_CGR1_WDOG_MASK (0x3 << 10)
-#define MXC_CCM_CGR1_PWM_OFFSET 12
-#define MXC_CCM_CGR1_PWM_MASK (0x3 << 12)
-#define MXC_CCM_CGR1_SIM_OFFSET 14
-#define MXC_CCM_CGR1_SIM_MASK (0x3 << 14)
-#define MXC_CCM_CGR1_ECT_OFFSET 16
-#define MXC_CCM_CGR1_ECT_MASK (0x3 << 16)
-#define MXC_CCM_CGR1_USBOTG_OFFSET 18
-#define MXC_CCM_CGR1_USBOTG_MASK (0x3 << 18)
-#define MXC_CCM_CGR1_KPP_OFFSET 20
-#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20)
-#define MXC_CCM_CGR1_IPU_OFFSET 22
-#define MXC_CCM_CGR1_IPU_MASK (0x3 << 22)
-#define MXC_CCM_CGR1_UART3_OFFSET 24
-#define MXC_CCM_CGR1_UART3_MASK (0x3 << 24)
-#define MXC_CCM_CGR1_UART4_OFFSET 26
-#define MXC_CCM_CGR1_UART4_MASK (0x3 << 26)
-#define MXC_CCM_CGR1_UART5_OFFSET 28
-#define MXC_CCM_CGR1_UART5_MASK (0x3 << 28)
-#define MXC_CCM_CGR1_OWIRE_OFFSET 30
-#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 30)
-
-#define MXC_CCM_CGR2_SSI2_OFFSET 0
-#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 0)
-#define MXC_CCM_CGR2_CSPI1_OFFSET 2
-#define MXC_CCM_CGR2_CSPI1_MASK (0x3 << 2)
-#define MXC_CCM_CGR2_CSPI2_OFFSET 4
-#define MXC_CCM_CGR2_CSPI2_MASK (0x3 << 4)
-#define MXC_CCM_CGR2_GACC_OFFSET 6
-#define MXC_CCM_CGR2_GACC_MASK (0x3 << 6)
-#define MXC_CCM_CGR2_EMI_OFFSET 8
-#define MXC_CCM_CGR2_EMI_MASK (0x3 << 8)
-#define MXC_CCM_CGR2_RTIC_OFFSET 10
-#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 10)
-#define MXC_CCM_CGR2_FIRI_OFFSET 12
-#define MXC_CCM_CGR2_FIRI_MASK (0x3 << 12)
-#define MXC_CCM_CGR2_IPMUX1_OFFSET 14
-#define MXC_CCM_CGR2_IPMUX1_MASK (0x3 << 14)
-#define MXC_CCM_CGR2_IPMUX2_OFFSET 16
-#define MXC_CCM_CGR2_IPMUX2_MASK (0x3 << 16)
-
-/* These new CGR2 bits are added in MX32 */
-#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET 18
-#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK (0x3 << 18)
-#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET 20
-#define MXC_CCM_CGR2_APMSSICLKSEL_MASK (0x3 << 20)
-#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET 22
-#define MXC_CCM_CGR2_APMPERCLKSEL_MASK (0x3 << 22)
-#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET 24
-#define MXC_CCM_CGR2_MXCCLKENSEL_MASK (0x1 << 24)
-#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET 25
-#define MXC_CCM_CGR2_CHIKCAMPEN_MASK (0x1 << 25)
-#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET 26
-#define MXC_CCM_CGR2_OVRVPUBUSY_MASK (0x1 << 26)
-#define MXC_CCM_CGR2_APMENA_OFFSET 30
-#define MXC_CCM_CGR2_AOMENA_MASK (0x1 << 30)
-
/*
* LTR0 register offsets
*/
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index f842880..380be0c 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,6 +25,8 @@
#include <mach/irqs.h>
#include <mach/imx-uart.h>
+#include "devices.h"
+
static struct resource uart0[] = {
{
.start = UART1_BASE_ADDR,
@@ -82,6 +84,7 @@
.num_resources = ARRAY_SIZE(uart2),
};
+#ifdef CONFIG_ARCH_MX31
static struct resource uart3[] = {
{
.start = UART4_BASE_ADDR,
@@ -119,6 +122,7 @@
.resource = uart4,
.num_resources = ARRAY_SIZE(uart4),
};
+#endif /* CONFIG_ARCH_MX31 */
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
@@ -164,8 +168,8 @@
static struct resource mxc_nand_resources[] = {
{
- .start = NFC_BASE_ADDR,
- .end = NFC_BASE_ADDR + 0xfff,
+ .start = 0, /* runtime dependent */
+ .end = 0,
.flags = IORESOURCE_MEM
}, {
.start = MXC_INT_NANDFC,
@@ -180,3 +184,188 @@
.num_resources = ARRAY_SIZE(mxc_nand_resources),
.resource = mxc_nand_resources,
};
+
+static struct resource mxc_i2c0_resources[] = {
+ {
+ .start = I2C_BASE_ADDR,
+ .end = I2C_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_I2C,
+ .end = MXC_INT_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_i2c_device0 = {
+ .name = "imx-i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_i2c0_resources),
+ .resource = mxc_i2c0_resources,
+};
+
+static struct resource mxc_i2c1_resources[] = {
+ {
+ .start = I2C2_BASE_ADDR,
+ .end = I2C2_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_I2C2,
+ .end = MXC_INT_I2C2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_i2c_device1 = {
+ .name = "imx-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxc_i2c1_resources),
+ .resource = mxc_i2c1_resources,
+};
+
+static struct resource mxc_i2c2_resources[] = {
+ {
+ .start = I2C3_BASE_ADDR,
+ .end = I2C3_BASE_ADDR + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MXC_INT_I2C3,
+ .end = MXC_INT_I2C3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_i2c_device2 = {
+ .name = "imx-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(mxc_i2c2_resources),
+ .resource = mxc_i2c2_resources,
+};
+
+#ifdef CONFIG_ARCH_MX31
+static struct resource mxcsdhc0_resources[] = {
+ {
+ .start = MMC_SDHC1_BASE_ADDR,
+ .end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_MMC_SDHC1,
+ .end = MXC_INT_MMC_SDHC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource mxcsdhc1_resources[] = {
+ {
+ .start = MMC_SDHC2_BASE_ADDR,
+ .end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_MMC_SDHC2,
+ .end = MXC_INT_MMC_SDHC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxcsdhc_device0 = {
+ .name = "mxc-mmc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxcsdhc0_resources),
+ .resource = mxcsdhc0_resources,
+};
+
+struct platform_device mxcsdhc_device1 = {
+ .name = "mxc-mmc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mxcsdhc1_resources),
+ .resource = mxcsdhc1_resources,
+};
+#endif /* CONFIG_ARCH_MX31 */
+
+/* i.MX31 Image Processing Unit */
+
+/* The resource order is important! */
+static struct resource mx3_ipu_rsrc[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR,
+ .end = IPU_CTRL_BASE_ADDR + 0x5F,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IPU_CTRL_BASE_ADDR + 0x88,
+ .end = IPU_CTRL_BASE_ADDR + 0xB3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_IPU_SYN,
+ .end = MXC_INT_IPU_SYN,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MXC_INT_IPU_ERR,
+ .end = MXC_INT_IPU_ERR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mx3_ipu = {
+ .name = "ipu-core",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mx3_ipu_rsrc),
+ .resource = mx3_ipu_rsrc,
+};
+
+static struct resource fb_resources[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR + 0xB4,
+ .end = IPU_CTRL_BASE_ADDR + 0x1BF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mx3_fb = {
+ .name = "mx3_sdc_fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fb_resources),
+ .resource = fb_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+#ifdef CONFIG_ARCH_MX35
+static struct resource mxc_fec_resources[] = {
+ {
+ .start = MXC_FEC_BASE_ADDR,
+ .end = MXC_FEC_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MXC_INT_FEC,
+ .end = MXC_INT_FEC,
+ .flags = IORESOURCE_IRQ
+ },
+};
+
+struct platform_device mxc_fec_device = {
+ .name = "fec",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_fec_resources),
+ .resource = mxc_fec_resources,
+};
+#endif
+
+static int mx3_devices_init(void)
+{
+ if (cpu_is_mx31()) {
+ mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
+ mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ }
+ if (cpu_is_mx35()) {
+ mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
+ mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+ }
+
+ return 0;
+}
+
+subsys_initcall(mx3_devices_init);
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 9949ef4..88c04b2 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -6,3 +6,11 @@
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_w1_master_device;
extern struct platform_device mxc_nand_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx3_ipu;
+extern struct platform_device mx3_fb;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxcsdhc_device0;
+extern struct platform_device mxcsdhc_device1;
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 7a5088b..40ffc5a 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -1,6 +1,7 @@
/*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -21,6 +22,7 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/iomux-mx3.h>
@@ -38,6 +40,8 @@
static DEFINE_SPINLOCK(gpio_mux_lock);
#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
/*
* set the mode for a IOMUX pin.
*/
@@ -50,9 +54,6 @@
field = pin_mode & 0x3;
mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
- pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n",
- __func__, (pin_mode & IOMUX_REG_MASK), field, mode);
-
spin_lock(&gpio_mux_lock);
l = __raw_readl(reg);
@@ -93,6 +94,86 @@
EXPORT_SYMBOL(mxc_iomux_set_pad);
/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
+ */
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+ unsigned gpio;
+
+ if (pad >= (PIN_MAX + 1)) {
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+ printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+ mxc_iomux_mode(pin);
+
+ /* if we have a gpio, we can allocate it */
+ gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+ if (gpio < (GPIO_PORT_MAX + 1) * 32)
+ if (gpio_request(gpio, label))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label)
+{
+ unsigned int *p = pin_list;
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ if (mxc_iomux_setup_pin(*p, label))
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_release_multiple_pins(pin_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+ unsigned gpio;
+
+ if (pad < (PIN_MAX + 1))
+ clear_bit(pad, mxc_pin_alloc_map);
+
+ gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
+ if (gpio < (GPIO_PORT_MAX + 1) * 32)
+ gpio_free(gpio);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+ unsigned int *p = pin_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_release_pin(*p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
* This function enables/disables the general purpose function for a particular
* signal.
*/
@@ -111,4 +192,3 @@
spin_unlock(&gpio_mux_lock);
}
EXPORT_SYMBOL(mxc_iomux_set_gpr);
-
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 0589b5c..9e1459c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,14 @@
#include <linux/mm.h>
#include <linux/init.h>
-#include <mach/hardware.h>
+#include <linux/err.h>
+
#include <asm/pgtable.h>
#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
#include <mach/common.h>
+#include <mach/hardware.h>
/*!
* @file mm.c
@@ -50,6 +54,16 @@
.pfn = __phys_to_pfn(AVIC_BASE_ADDR),
.length = AVIC_SIZE,
.type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+ .length = AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+ .length = AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
},
};
@@ -62,3 +76,24 @@
{
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+
+#ifdef CONFIG_CACHE_L2X0
+static int mxc_init_l2x0(void)
+{
+ void __iomem *l2x0_base;
+
+ l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+ if (IS_ERR(l2x0_base)) {
+ printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+ PTR_ERR(l2x0_base));
+ return 0;
+ }
+
+ l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+ return 0;
+}
+
+arch_initcall(mxc_init_l2x0);
+#endif
+
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index f902a7c..83e5e8e 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -22,6 +22,8 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <linux/irq.h>
#include <mach/hardware.h>
@@ -35,6 +37,12 @@
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
#include "devices.h"
/*!
@@ -94,13 +102,16 @@
.flags = IMXUART_HAVE_RTSCTS,
};
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
static inline void mxc_init_imx_uart(void)
{
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
}
#else /* !SERIAL_IMX */
@@ -176,7 +187,7 @@
/*
* Configure INT line as GPIO input
*/
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
+ mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -191,26 +202,301 @@
set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
}
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board. When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+ {
+ .supply = "cpu_vcc",
+ }
+};
+
+static struct regulator_init_data sw1a_data = {
+ .constraints = {
+ .name = "SW1A",
+ .min_uV = 1275000,
+ .max_uV = 1600000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .state_mem = {
+ .uV = 1400000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+ .consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+ .constraints = {
+ .name = "VIOHO",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .state_mem = {
+ .uV = 2800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+ .constraints = {
+ .name = "VIOLO",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+ .constraints = {
+ .name = "SW2A",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .state_disk = {
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 0,
+ },
+ .always_on = 1,
+ .boot_on = 1,
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+static struct regulator_init_data ldo1_data = {
+ .constraints = {
+ .name = "VCAM/VMMC1/VMMC2",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+ {
+ .supply = "AVDD",
+ },
+ {
+ .supply = "HPVDD",
+ },
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+ .constraints = {
+ .name = "VESIM/VSIM/AVDD",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+ .consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+ .constraints = {
+ .name = "VDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+ .constraints = {
+ .name = "VRF1/CVDD_2.775",
+ .min_uV = 2500000,
+ .max_uV = 2500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+ .name = "wm8350:white",
+ .default_trigger = "heartbeat",
+ .max_uA = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+ .vmid_discharge_msecs = 1000,
+ .drain_msecs = 30,
+ .cap_discharge_msecs = 700,
+ .vmid_charge_msecs = 700,
+ .vmid_s_curve = WM8350_S_CURVE_SLOW,
+ .dis_out4 = WM8350_DISCHARGE_SLOW,
+ .dis_out3 = WM8350_DISCHARGE_SLOW,
+ .dis_out2 = WM8350_DISCHARGE_SLOW,
+ .dis_out1 = WM8350_DISCHARGE_SLOW,
+ .vroi_out4 = WM8350_TIE_OFF_500R,
+ .vroi_out3 = WM8350_TIE_OFF_500R,
+ .vroi_out2 = WM8350_TIE_OFF_500R,
+ .vroi_out1 = WM8350_TIE_OFF_500R,
+ .vroi_enable = 0,
+ .codec_current_on = WM8350_CODEC_ISEL_1_0,
+ .codec_current_standby = WM8350_CODEC_ISEL_0_5,
+ .codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+ int i;
+
+ wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_ON);
+
+ wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_ON);
+
+ wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ /* Fix up for our own supplies. */
+ for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
+ ldo2_consumers[i].dev = wm8350->dev;
+
+ wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+ /* LEDs */
+ wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+ WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+ wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+ WM8350_ISINK_FLASH_DISABLE,
+ WM8350_ISINK_FLASH_TRIG_BIT,
+ WM8350_ISINK_FLASH_DUR_32MS,
+ WM8350_ISINK_FLASH_ON_INSTANT,
+ WM8350_ISINK_FLASH_OFF_INSTANT,
+ WM8350_ISINK_FLASH_MODE_EN);
+ wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+ WM8350_ISINK_MODE_BOOST,
+ WM8350_ISINK_ILIM_NORMAL,
+ WM8350_DC5_RMP_20V,
+ WM8350_DC5_FBSRC_ISINKA);
+ wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+ &wm8350_led_data);
+
+ wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+ .init = mx31_wm8350_init,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+ {
+ I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &mx31_wm8350_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ },
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+ i2c_register_board_info(1, mx31ads_i2c1_devices,
+ ARRAY_SIZE(mx31ads_i2c1_devices));
+
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+ mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE / 2,
@@ -221,13 +507,13 @@
/*!
* Set up static virtual mappings.
*/
-void __init mx31ads_map_io(void)
+static void __init mx31ads_map_io(void)
{
mxc_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
-void __init mx31ads_init_irq(void)
+static void __init mx31ads_init_irq(void)
{
mxc_init_irq();
mx31ads_init_expio();
@@ -240,15 +526,15 @@
{
mxc_init_extuart();
mxc_init_imx_uart();
+ mxc_init_i2c();
}
static void __init mx31ads_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
-struct sys_timer mx31ads_timer = {
+static struct sys_timer mx31ads_timer = {
.init = mx31ads_timer_init,
};
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index c434400..894d98c 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -42,21 +42,11 @@
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
@@ -82,8 +72,7 @@
static void __init mx31lite_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
struct sys_timer mx31lite_timer = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
new file mode 100644
index 0000000..d080b4a
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mxc_uart1_pins[] = {
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+};
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_devboard_init(void)
+{
+ printk(KERN_INFO "Initializing mx31devboard peripherals\n");
+ mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
new file mode 100644
index 0000000..9ef9566
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_marxbot_init(void)
+{
+ printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index c29098a..34c2a1b 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -32,6 +32,7 @@
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
#include "devices.h"
@@ -63,6 +64,18 @@
&mx31moboard_flash,
};
+static int mxc_uart0_pins[] = {
+ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+};
+static int mxc_uart4_pins[] = {
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+};
+
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
/*
* Board specific initialization.
*/
@@ -70,58 +83,29 @@
{
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_CTS2__CTS2);
- mxc_iomux_mode(MX31_PIN_RTS2__RTS2);
- mxc_iomux_mode(MX31_PIN_TXD2__TXD2);
- mxc_iomux_mode(MX31_PIN_RXD2__RXD2);
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
- mxc_iomux_mode(MX31_PIN_PC_RST__CTS5);
- mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5);
- mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5);
- mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5);
-
+ mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
mxc_register_device(&mxc_uart_device4, &uart_pdata);
-}
-/*
- * This structure defines static mappings for the mx31moboard.
- */
-static struct map_desc mx31moboard_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31moboard_map_io(void)
-{
- mxc_map_io();
- iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc));
+ switch (mx31moboard_baseboard) {
+ case MX31NOBOARD:
+ break;
+ case MX31DEVBOARD:
+ mx31moboard_devboard_init();
+ break;
+ case MX31MARXBOT:
+ mx31moboard_marxbot_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+ }
}
static void __init mx31moboard_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
struct sys_timer mx31moboard_timer = {
@@ -133,7 +117,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31moboard_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index d464d06..bc63f17 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -45,40 +45,17 @@
.flags = IMXUART_HAVE_RTSCTS,
};
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-
-/*!
- * This structure defines static mappings for the i.MX31PDK board.
- */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
};
-/*!
- * Set up static virtual mappings.
- */
-static void __init mx31pdk_map_io(void)
+static inline void mxc_init_imx_uart(void)
{
- mxc_map_io();
- iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
}
/*!
@@ -91,8 +68,7 @@
static void __init mx31pdk_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
static struct sys_timer mx31pdk_timer = {
@@ -108,7 +84,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31pdk_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 8cea825..5fce022 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -26,6 +26,8 @@
#include <linux/gpio.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -37,6 +39,10 @@
#include <mach/iomux-mx3.h>
#include <mach/board-pcm037.h>
#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
#include "devices.h"
@@ -117,12 +123,90 @@
.hw_ecc = 1,
};
+#ifdef CONFIG_I2C_IMX
+static int i2c_1_pins[] = {
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+};
+
+static int pcm037_i2c_1_init(struct device *dev)
+{
+ return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
+ "i2c-1");
+}
+
+static void pcm037_i2c_1_exit(struct device *dev)
+{
+ mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
+}
+
+static struct imxi2c_platform_data pcm037_i2c_1_data = {
+ .bitrate = 100000,
+ .init = pcm037_i2c_1_init,
+ .exit = pcm037_i2c_1_exit,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563",
+ }
+};
+#endif
+
+static int sdhc1_pins[] = {
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+};
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+{
+ return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
+ "sdhc-1");
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+ mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+}
+
+/* No card and rw detection at the moment */
+static struct imxmmc_platform_data sdhc_pdata = {
+ .init = pcm970_sdhc1_init,
+ .exit = pcm970_sdhc1_exit,
+};
+
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_eth,
&pcm037_sram_device,
};
+static int uart0_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static int uart2_pins[] = {
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3
+};
+
/*
* Board specific initialization.
*/
@@ -130,59 +214,33 @@
{
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
- mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
- mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
- mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
-
+ mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
- mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
-
+ mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
+ mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* SMSC9215 IRQ pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
- if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+ if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ "pcm037-eth"))
gpio_direction_input(MX31_PIN_GPIO3_1);
+#ifdef CONFIG_I2C_IMX
+ i2c_register_board_info(1, pcm037_i2c_devices,
+ ARRAY_SIZE(pcm037_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+#endif
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-}
-
-/*
- * This structure defines static mappings for the pcm037 board.
- */
-static struct map_desc pcm037_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init pcm037_map_io(void)
-{
- mxc_map_io();
- iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc));
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
}
static void __init pcm037_timer_init(void)
{
- mxc_clocks_init(26000000);
- mxc_timer_init("ipg_clk.0");
+ mx31_clocks_init(26000000);
}
struct sys_timer pcm037_timer = {
@@ -194,7 +252,7 @@
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = pcm037_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
new file mode 100644
index 0000000..6c4283c
--- /dev/null
+++ b/arch/arm/mach-mx3/qong.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/board-qong.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev) \
+ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE (1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE 0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION 0x00
+
+#define QONG_DNET_ID 1
+#define QONG_DNET_BASEADDR \
+ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE 0x00001000
+
+#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+ "uart-0");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+ [0] = {
+ .name = "dnet-memory",
+ .start = QONG_DNET_BASEADDR,
+ .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = QONG_FPGA_IRQ,
+ .end = QONG_FPGA_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dnet_device = {
+ .name = "dnet",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dnet_resources),
+ .resource = dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+ int ret;
+
+ ret = platform_device_register(&dnet_device);
+ return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+ .width = 2,
+};
+
+static struct resource qong_flash_resource = {
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &qong_flash_data,
+ },
+ .resource = &qong_flash_resource,
+ .num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+ (void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+ else
+ writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip >= 0)
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+ else
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+ .chip = {
+ .chip_delay = 20,
+ .options = 0,
+ },
+ .ctrl = {
+ .cmd_ctrl = qong_nand_cmd_ctrl,
+ .dev_ready = qong_nand_device_ready,
+ .select_chip = qong_nand_select_chip,
+ }
+};
+
+static struct resource qong_nand_resource = {
+ .start = CS3_BASE_ADDR,
+ .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &qong_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+ /* init CS */
+ __raw_writel(0x00004f00, CSCR_U(3));
+ __raw_writel(0x20013b31, CSCR_L(3));
+ __raw_writel(0x00020800, CSCR_A(3));
+ mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+ /* enable pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+ /* ready/busy pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+ /* write protect pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+ platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+ void __iomem *regs;
+ u32 fpga_ver;
+
+ regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+ if (!regs) {
+ printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+ __func__);
+ return;
+ }
+
+ fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+ iounmap(regs);
+ printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+ (fpga_ver & 0xF000) >> 12,
+ (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+ if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+ printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+ "devices won't be registered!\n");
+ return;
+ }
+
+ /* register FPGA-based devices */
+ qong_init_nand_mtd();
+ qong_init_dnet();
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc qong_io_desc[] __initdata = {
+ {
+ .virtual = AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
+ .length = AIPS1_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }, {
+ .virtual = AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
+ .length = AIPS2_SIZE,
+ .type = MT_DEVICE_NONSHARED
+ }
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init qong_map_io(void)
+{
+ mxc_map_io();
+ iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_init_imx_uart();
+ qong_init_nor_mtd();
+ qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+ .init = qong_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_QONG data structure.
+ */
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+ /* Maintainer: DENX Software Engineering GmbH */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = qong_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &qong_timer,
+MACHINE_END
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index 6c1023b..dc7b4bc 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -28,7 +28,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
NETX_SYSTEM_RES_CR);
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
index e2068c5..1561588 100644
--- a/arch/arm/mach-ns9xxx/include/mach/system.h
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -20,7 +20,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
#ifdef CONFIG_PROCESSOR_NS9360
if (processor_is_ns9360())
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 10a301e..3f325d3 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -7,6 +7,11 @@
select CPU_ARM926T
select ARCH_OMAP_OTG
+config ARCH_OMAP850
+ depends on ARCH_OMAP1
+ bool "OMAP850 Based System"
+ select CPU_ARM926T
+
config ARCH_OMAP15XX
depends on ARCH_OMAP1
default y
@@ -46,6 +51,12 @@
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
+config MACH_OMAP_HTCWIZARD
+ bool "HTC Wizard"
+ depends on ARCH_OMAP850
+ help
+ HTC Wizard smartphone support (AKA QTEK 9100, ...)
+
config MACH_OMAP_OSK
bool "TI OSK Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
@@ -163,7 +174,7 @@
config OMAP_ARM_195MHZ
bool "OMAP ARM 195 MHz CPU"
- depends on ARCH_OMAP1 && ARCH_OMAP730
+ depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 195MHz clock for OMAP CPU. If unsure, say N.
@@ -175,13 +186,13 @@
config OMAP_ARM_182MHZ
bool "OMAP ARM 182 MHz CPU"
- depends on ARCH_OMAP1 && ARCH_OMAP730
+ depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 182MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_168MHZ
bool "OMAP ARM 168 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 168MHz clock for OMAP CPU. If unsure, say N.
@@ -193,20 +204,20 @@
config OMAP_ARM_120MHZ
bool "OMAP ARM 120 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 120MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_60MHZ
bool "OMAP ARM 60 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
default y
help
Enable 60MHz clock for OMAP CPU. If unsure, say Y.
config OMAP_ARM_30MHZ
bool "OMAP ARM 30 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730)
+ depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 30MHz clock for OMAP CPU. If unsure, say N.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2e61839..8b40aac 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -175,7 +175,6 @@
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
- { OMAP_TAG_USB, &ams_delta_usb_config },
};
static struct resource ams_delta_kp_resources[] = {
@@ -232,6 +231,7 @@
/* Clear latch2 (NAND, LCD, modem enable) */
ams_delta_latch2_write(~0, 0);
+ omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
}
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 3030829..19e0e923 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -34,7 +34,39 @@
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/board.h>
-#include <mach/board-fsample.h>
+
+/* fsample is pretty close to p2-sample */
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE 0xE8100000
+#define FSAMPLE_CPLD_SIZE SZ_4K
+#define FSAMPLE_CPLD_START 0x05080000
+
+#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET 0
+#define FSAMPLE_CPLD_BIT_LCD_RESET 1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
+#define FSAMPLE_CPLD_BIT_OTG_RESET 9
+
+#define fsample_cpld_set(bit) \
+ fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+ fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
static int fsample_keymap[] = {
KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 7d26702..e724940 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -62,7 +62,6 @@
};
static struct omap_board_config_kernel generic_config[] __initdata = {
- { OMAP_TAG_USB, NULL },
{ OMAP_TAG_UART, &generic_uart_config },
};
@@ -70,12 +69,12 @@
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
- generic_config[0].data = &generic1510_usb_config;
+ omap_usb_init(&generic1510_usb_config);
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (!cpu_is_omap1510()) {
- generic_config[0].data = &generic1610_usb_config;
+ omap_usb_init(&generic1610_usb_config);
}
#endif
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 409fa56..44d4a96 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -19,6 +19,8 @@
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include "board-h2.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0d784a7..f695aa0 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -46,6 +46,11 @@
#include <mach/keypad.h>
#include <mach/common.h>
+#include "board-h2.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START 0x04000300
+
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -364,7 +369,6 @@
};
static struct omap_board_config_kernel h2_config[] __initdata = {
- { OMAP_TAG_USB, &h2_usb_config },
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
@@ -413,6 +417,7 @@
omap_serial_init();
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
+ omap_usb_init(&h2_usb_config);
h2_mmc_init();
}
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/mach-omap1/board-h2.h
similarity index 90%
rename from arch/arm/plat-omap/include/mach/board-h2.h
rename to arch/arm/mach-omap1/board-h2.h
index 15531c8..315e266 100644
--- a/arch/arm/plat-omap/include/mach/board-h2.h
+++ b/arch/arm/mach-omap1/board-h2.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/board-h2.h
+ * arch/arm/mach-omap1/board-h2.h
*
* Hardware definitions for TI OMAP1610 H2 board.
*
@@ -29,9 +29,6 @@
#ifndef __ASM_ARCH_OMAP_H2_H
#define __ASM_ARCH_OMAP_H2_H
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START 0x04000300
-
#define H2_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
# define H2_TPS_GPIO_MMC_PWR_EN (H2_TPS_GPIO_BASE + 3)
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index fdfe793..0d8a3c1 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -19,6 +19,8 @@
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include "board-h3.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index bf08b6ad..4695965 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -50,6 +50,11 @@
#include <mach/dma.h>
#include <mach/common.h>
+#include "board-h3.h"
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START 0x04000300
+
#define H3_TS_GPIO 48
static int h3_keymap[] = {
@@ -418,7 +423,6 @@
};
static struct omap_board_config_kernel h3_config[] __initdata = {
- { OMAP_TAG_USB, &h3_usb_config },
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
@@ -472,6 +476,7 @@
omap_serial_init();
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
+ omap_usb_init(&h3_usb_config);
h3_mmc_init();
}
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/mach-omap1/board-h3.h
similarity index 90%
rename from arch/arm/plat-omap/include/mach/board-h3.h
rename to arch/arm/mach-omap1/board-h3.h
index 1888326..78de535 100644
--- a/arch/arm/plat-omap/include/mach/board-h3.h
+++ b/arch/arm/mach-omap1/board-h3.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/board-h3.h
+ * arch/arm/mach-omap1/board-h3.h
*
* Copyright (C) 2001 RidgeRun, Inc.
* Copyright (C) 2004 Texas Instruments, Inc.
@@ -27,9 +27,6 @@
#ifndef __ASM_ARCH_OMAP_H3_H
#define __ASM_ARCH_OMAP_H3_H
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START 0x04000300
-
#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 071cd02..2fd98260 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -39,6 +39,9 @@
#include <mach/common.h>
#include <mach/mmc.h>
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START 0x04000300
+
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 3, KEY_DOWN),
@@ -370,7 +373,6 @@
};
static struct omap_board_config_kernel innovator_config[] = {
- { OMAP_TAG_USB, NULL },
{ OMAP_TAG_LCD, NULL },
{ OMAP_TAG_UART, &innovator_uart_config },
};
@@ -392,13 +394,13 @@
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
- innovator_config[0].data = &innovator1510_usb_config;
+ omap_usb_init(&innovator1510_usb_config);
innovator_config[1].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
- innovator_config[0].data = &h2_usb_config;
+ omap_usb_init(&h2_usb_config);
innovator_config[1].data = &innovator1610_lcd_config;
}
#endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index af51e0b..7bc7a3c 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -233,10 +233,6 @@
}
#endif
-static struct omap_board_config_kernel nokia770_config[] __initdata = {
- { OMAP_TAG_USB, NULL },
-};
-
#if defined(CONFIG_OMAP_DSP)
/*
* audio power control
@@ -371,19 +367,16 @@
static void __init omap_nokia770_init(void)
{
- nokia770_config[0].data = &nokia770_usb_config;
-
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
- omap_board_config = nokia770_config;
- omap_board_config_size = ARRAY_SIZE(nokia770_config);
omap_gpio_init();
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_dsp_init();
ads7846_dev_init();
mipid_dev_init();
+ omap_usb_init(&nokia770_usb_config);
nokia770_mmc_init();
}
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 1a16ecb..cf3247b 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -52,6 +52,20 @@
#include <mach/tc.h>
#include <mach/common.h>
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START 0x04800300
+
+/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
+# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
+# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
+# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
+# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
+# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
+
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@@ -290,7 +304,6 @@
#endif
static struct omap_board_config_kernel osk_config[] __initdata = {
- { OMAP_TAG_USB, &osk_usb_config },
{ OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
@@ -541,6 +554,8 @@
l |= (3 << 1);
omap_writel(l, USB_TRANSCEIVER_CTRL);
+ omap_usb_init(&osk_usb_config);
+
/* irq for tps65010 chip */
/* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 99f2b43..886b4c0 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -43,6 +43,21 @@
#include <mach/keypad.h>
#include <mach/common.h>
+#define PALMTE_USBDETECT_GPIO 0
+#define PALMTE_USB_OR_DC_GPIO 1
+#define PALMTE_TSC_GPIO 4
+#define PALMTE_PINTDAV_GPIO 6
+#define PALMTE_MMC_WP_GPIO 8
+#define PALMTE_MMC_POWER_GPIO 9
+#define PALMTE_HDQ_GPIO 11
+#define PALMTE_HEADPHONES_GPIO 14
+#define PALMTE_SPEAKER_GPIO 15
+#define PALMTE_DC_GPIO OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
+
static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
@@ -286,7 +301,6 @@
#endif
static struct omap_board_config_kernel palmte_config[] __initdata = {
- { OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
@@ -341,6 +355,7 @@
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
palmte_misc_gpio_setup();
omap_serial_init();
+ omap_usb_init(&palmte_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
}
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 1cbc127..4f1b448 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -43,6 +43,13 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#define PALMTT_USBDETECT_GPIO 0
+#define PALMTT_CABLE_GPIO 1
+#define PALMTT_LED_GPIO 3
+#define PALMTT_PENIRQ_GPIO 6
+#define PALMTT_MMC_WP_GPIO 8
+#define PALMTT_HDQ_GPIO 11
+
static int palmtt_keymap[] = {
KEY(0, 0, KEY_ESC),
KEY(0, 1, KEY_SPACE),
@@ -272,7 +279,6 @@
};
static struct omap_board_config_kernel palmtt_config[] __initdata = {
- { OMAP_TAG_USB, &palmtt_usb_config },
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
@@ -297,6 +303,7 @@
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
+ omap_usb_init(&palmtt_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
}
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index baf5efb..9a55c3c 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -46,6 +46,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#define PALMZ71_USBDETECT_GPIO 0
+#define PALMZ71_PENIRQ_GPIO 6
+#define PALMZ71_MMC_WP_GPIO 8
+#define PALMZ71_HDQ_GPIO 11
+
+#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
+
static void __init
omap_palmz71_init_irq(void)
{
@@ -239,7 +249,6 @@
};
static struct omap_board_config_kernel palmz71_config[] __initdata = {
- {OMAP_TAG_USB, &palmz71_usb_config},
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
@@ -313,6 +322,7 @@
spi_register_board_info(palmz71_boardinfo,
ARRAY_SIZE(palmz71_boardinfo));
+ omap_usb_init(&palmz71_usb_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
palmz71_gpio_setup(0);
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 66a4d7d..58a46e4 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -17,6 +17,7 @@
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/gpio.h>
+#include <mach/board-sx1.h>
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 28c76a1..c096577 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -41,6 +41,7 @@
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
+#include <mach/board-sx1.h>
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -373,7 +374,6 @@
};
static struct omap_board_config_kernel sx1_config[] __initdata = {
- { OMAP_TAG_USB, &sx1_usb_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
@@ -388,6 +388,7 @@
omap_board_config_size = ARRAY_SIZE(sx1_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
+ omap_usb_init(&sx1_usb_config);
sx1_mmc_init();
/* turn on USB power */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index a765354..98275e0 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -145,7 +145,6 @@
};
static struct omap_board_config_kernel voiceblue_config[] = {
- { OMAP_TAG_USB, &voiceblue_usb_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
@@ -185,6 +184,7 @@
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
omap_serial_init();
+ omap_usb_init(&voiceblue_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
/* There is a good chance board is going up, so enable power LED
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 5fba207..dafe4f7 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -20,41 +20,161 @@
#include <linux/io.h>
#include <asm/mach-types.h>
+#include <asm/clkdev.h>
#include <mach/cpu.h>
#include <mach/usb.h>
#include <mach/clock.h>
#include <mach/sram.h>
+static const struct clkops clkops_generic;
+static const struct clkops clkops_uart;
+static const struct clkops clkops_dspck;
+
#include "clock.h"
+static int clk_omap1_dummy_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static void clk_omap1_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clkops_dummy = {
+ .enable = clk_omap1_dummy_enable,
+ .disable = clk_omap1_dummy_disable,
+};
+
+static struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_dummy,
+ .flags = RATE_FIXED,
+};
+
+struct omap_clk {
+ u32 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+#define CK_310 (1 << 0)
+#define CK_730 (1 << 1)
+#define CK_1510 (1 << 2)
+#define CK_16XX (1 << 3)
+
+static struct omap_clk omap_clks[] = {
+ /* non-ULPD clocks */
+ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
+ /* CK_GEN1 clocks */
+ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
+ CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
+ CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
+ CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
+ CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310),
+ CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX),
+ /* CK_GEN2 clocks */
+ CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
+ /* CK_GEN3 clocks */
+ CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730),
+ CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
+ CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX),
+ CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
+ CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX),
+ CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+ CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
+ CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
+ CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
+ CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730),
+ CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
+ /* ULPD clocks */
+ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
+ CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX),
+ CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310),
+ CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX),
+ CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
+ CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
+ CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
+ CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
+ CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
+ CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
+ CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
+ CLK(NULL, "bclk", &bclk_16xx, CK_16XX),
+ CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310),
+ CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX),
+ CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
+ /* Virtual clocks */
+ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+ CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310),
+ CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
+ CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX),
+ CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX),
+ CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX),
+ CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310),
+ CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+ CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
+ CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
+};
+
+static int omap1_clk_enable_generic(struct clk * clk);
+static int omap1_clk_enable(struct clk *clk);
+static void omap1_clk_disable_generic(struct clk * clk);
+static void omap1_clk_disable(struct clk *clk);
+
__u32 arm_idlect1_mask;
/*-------------------------------------------------------------------------
* Omap1 specific clock functions
*-------------------------------------------------------------------------*/
-static void omap1_watchdog_recalc(struct clk * clk)
+static unsigned long omap1_watchdog_recalc(struct clk *clk)
{
- clk->rate = clk->parent->rate / 14;
+ return clk->parent->rate / 14;
}
-static void omap1_uart_recalc(struct clk * clk)
+static unsigned long omap1_uart_recalc(struct clk *clk)
{
- unsigned int val = omap_readl(clk->enable_reg);
- if (val & clk->enable_bit)
- clk->rate = 48000000;
- else
- clk->rate = 12000000;
+ unsigned int val = __raw_readl(clk->enable_reg);
+ return val & clk->enable_bit ? 48000000 : 12000000;
}
-static void omap1_sossi_recalc(struct clk *clk)
+static unsigned long omap1_sossi_recalc(struct clk *clk)
{
u32 div = omap_readl(MOD_CONF_CTRL_1);
div = (div >> 17) & 0x7;
div++;
- clk->rate = clk->parent->rate / div;
+
+ return clk->parent->rate / div;
}
static int omap1_clk_enable_dsp_domain(struct clk *clk)
@@ -78,6 +198,11 @@
}
}
+static const struct clkops clkops_dspck = {
+ .enable = &omap1_clk_enable_dsp_domain,
+ .disable = &omap1_clk_disable_dsp_domain,
+};
+
static int omap1_clk_enable_uart_functional(struct clk *clk)
{
int ret;
@@ -105,6 +230,11 @@
omap1_clk_disable_generic(clk);
}
+static const struct clkops clkops_uart = {
+ .enable = &omap1_clk_enable_uart_functional,
+ .disable = &omap1_clk_disable_uart_functional,
+};
+
static void omap1_clk_allow_idle(struct clk *clk)
{
struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
@@ -197,9 +327,6 @@
struct clk * parent;
unsigned dsor_exp;
- if (unlikely(!(clk->flags & RATE_CKCTL)))
- return -EINVAL;
-
parent = clk->parent;
if (unlikely(parent == NULL))
return -EIO;
@@ -215,22 +342,15 @@
return dsor_exp;
}
-static void omap1_ckctl_recalc(struct clk * clk)
+static unsigned long omap1_ckctl_recalc(struct clk *clk)
{
- int dsor;
-
/* Calculate divisor encoded as 2-bit exponent */
- dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
- if (unlikely(clk->rate == clk->parent->rate / dsor))
- return; /* No change, quick exit */
- clk->rate = clk->parent->rate / dsor;
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ return clk->parent->rate / dsor;
}
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk)
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
{
int dsor;
@@ -245,12 +365,7 @@
dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
omap1_clk_disable(&api_ck.clk);
- if (unlikely(clk->rate == clk->parent->rate / dsor))
- return; /* No change, quick exit */
- clk->rate = clk->parent->rate / dsor;
-
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ return clk->parent->rate / dsor;
}
/* MPU virtual clock functions */
@@ -289,35 +404,57 @@
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
ck_dpll1.rate = ptr->pll_rate;
- propagate_rate(&ck_dpll1);
return 0;
}
static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
{
- int ret = -EINVAL;
- int dsor_exp;
- __u16 regval;
+ int dsor_exp;
+ u16 regval;
- if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp > 3)
- dsor_exp = -EINVAL;
- if (dsor_exp < 0)
- return dsor_exp;
+ dsor_exp = calc_dsor_exp(clk, rate);
+ if (dsor_exp > 3)
+ dsor_exp = -EINVAL;
+ if (dsor_exp < 0)
+ return dsor_exp;
- regval = __raw_readw(DSP_CKCTL);
- regval &= ~(3 << clk->rate_offset);
- regval |= dsor_exp << clk->rate_offset;
- __raw_writew(regval, DSP_CKCTL);
- clk->rate = clk->parent->rate / (1 << dsor_exp);
- ret = 0;
- }
+ regval = __raw_readw(DSP_CKCTL);
+ regval &= ~(3 << clk->rate_offset);
+ regval |= dsor_exp << clk->rate_offset;
+ __raw_writew(regval, DSP_CKCTL);
+ clk->rate = clk->parent->rate / (1 << dsor_exp);
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
+ return 0;
+}
- return ret;
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+ int dsor_exp = calc_dsor_exp(clk, rate);
+ if (dsor_exp < 0)
+ return dsor_exp;
+ if (dsor_exp > 3)
+ dsor_exp = 3;
+ return clk->parent->rate / (1 << dsor_exp);
+}
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+ int dsor_exp;
+ u16 regval;
+
+ dsor_exp = calc_dsor_exp(clk, rate);
+ if (dsor_exp > 3)
+ dsor_exp = -EINVAL;
+ if (dsor_exp < 0)
+ return dsor_exp;
+
+ regval = omap_readw(ARM_CKCTL);
+ regval &= ~(3 << clk->rate_offset);
+ regval |= dsor_exp << clk->rate_offset;
+ regval = verify_ckctl_value(regval);
+ omap_writew(regval, ARM_CKCTL);
+ clk->rate = clk->parent->rate / (1 << dsor_exp);
+ return 0;
}
static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
@@ -372,14 +509,14 @@
{
unsigned int val;
- val = omap_readl(clk->enable_reg);
+ val = __raw_readl(clk->enable_reg);
if (rate == 12000000)
val &= ~(1 << clk->enable_bit);
else if (rate == 48000000)
val |= (1 << clk->enable_bit);
else
return -EINVAL;
- omap_writel(val, clk->enable_reg);
+ __raw_writel(val, clk->enable_reg);
clk->rate = rate;
return 0;
@@ -398,8 +535,8 @@
else
ratio_bits = (dsor - 2) << 2;
- ratio_bits |= omap_readw(clk->enable_reg) & ~0xfd;
- omap_writew(ratio_bits, clk->enable_reg);
+ ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
+ __raw_writew(ratio_bits, clk->enable_reg);
return 0;
}
@@ -423,8 +560,6 @@
omap_writel(l, MOD_CONF_CTRL_1);
clk->rate = p_rate / (div + 1);
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
return 0;
}
@@ -440,8 +575,8 @@
__u16 ratio_bits;
/* Determine current rate and ensure clock is based on 96MHz APLL */
- ratio_bits = omap_readw(clk->enable_reg) & ~1;
- omap_writew(ratio_bits, clk->enable_reg);
+ ratio_bits = __raw_readw(clk->enable_reg) & ~1;
+ __raw_writew(ratio_bits, clk->enable_reg);
ratio_bits = (ratio_bits & 0xfc) >> 2;
if (ratio_bits > 6)
@@ -468,7 +603,7 @@
omap1_clk_deny_idle(clk->parent);
}
- ret = clk->enable(clk);
+ ret = clk->ops->enable(clk);
if (unlikely(ret != 0) && clk->parent) {
omap1_clk_disable(clk->parent);
@@ -482,7 +617,7 @@
static void omap1_clk_disable(struct clk *clk)
{
if (clk->usecount > 0 && !(--clk->usecount)) {
- clk->disable(clk);
+ clk->ops->disable(clk);
if (likely(clk->parent)) {
omap1_clk_disable(clk->parent);
if (clk->flags & CLOCK_NO_IDLE_PARENT)
@@ -496,9 +631,6 @@
__u16 regval16;
__u32 regval32;
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
if (unlikely(clk->enable_reg == NULL)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
@@ -506,25 +638,13 @@
}
if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval32 = __raw_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- } else {
- regval32 = omap_readl(clk->enable_reg);
- regval32 |= (1 << clk->enable_bit);
- omap_writel(regval32, clk->enable_reg);
- }
+ regval32 = __raw_readl(clk->enable_reg);
+ regval32 |= (1 << clk->enable_bit);
+ __raw_writel(regval32, clk->enable_reg);
} else {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval16 = __raw_readw(clk->enable_reg);
- regval16 |= (1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
- } else {
- regval16 = omap_readw(clk->enable_reg);
- regval16 |= (1 << clk->enable_bit);
- omap_writew(regval16, clk->enable_reg);
- }
+ regval16 = __raw_readw(clk->enable_reg);
+ regval16 |= (1 << clk->enable_bit);
+ __raw_writew(regval16, clk->enable_reg);
}
return 0;
@@ -539,44 +659,26 @@
return;
if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval32 = __raw_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- } else {
- regval32 = omap_readl(clk->enable_reg);
- regval32 &= ~(1 << clk->enable_bit);
- omap_writel(regval32, clk->enable_reg);
- }
+ regval32 = __raw_readl(clk->enable_reg);
+ regval32 &= ~(1 << clk->enable_bit);
+ __raw_writel(regval32, clk->enable_reg);
} else {
- if (clk->flags & VIRTUAL_IO_ADDRESS) {
- regval16 = __raw_readw(clk->enable_reg);
- regval16 &= ~(1 << clk->enable_bit);
- __raw_writew(regval16, clk->enable_reg);
- } else {
- regval16 = omap_readw(clk->enable_reg);
- regval16 &= ~(1 << clk->enable_bit);
- omap_writew(regval16, clk->enable_reg);
- }
+ regval16 = __raw_readw(clk->enable_reg);
+ regval16 &= ~(1 << clk->enable_bit);
+ __raw_writew(regval16, clk->enable_reg);
}
}
+static const struct clkops clkops_generic = {
+ .enable = &omap1_clk_enable_generic,
+ .disable = &omap1_clk_disable_generic,
+};
+
static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
{
- int dsor_exp;
-
if (clk->flags & RATE_FIXED)
return clk->rate;
- if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp < 0)
- return dsor_exp;
- if (dsor_exp > 3)
- dsor_exp = 3;
- return clk->parent->rate / (1 << dsor_exp);
- }
-
if (clk->round_rate != NULL)
return clk->round_rate(clk, rate);
@@ -586,30 +688,9 @@
static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EINVAL;
- int dsor_exp;
- __u16 regval;
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
- else if (clk->flags & RATE_CKCTL) {
- dsor_exp = calc_dsor_exp(clk, rate);
- if (dsor_exp > 3)
- dsor_exp = -EINVAL;
- if (dsor_exp < 0)
- return dsor_exp;
-
- regval = omap_readw(ARM_CKCTL);
- regval &= ~(3 << clk->rate_offset);
- regval |= dsor_exp << clk->rate_offset;
- regval = verify_ckctl_value(regval);
- omap_writew(regval, ARM_CKCTL);
- clk->rate = clk->parent->rate / (1 << dsor_exp);
- ret = 0;
- }
-
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
-
return ret;
}
@@ -632,17 +713,10 @@
}
/* Is the clock already disabled? */
- if (clk->flags & ENABLE_REG_32BIT) {
- if (clk->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readl(clk->enable_reg);
- else
- regval32 = omap_readl(clk->enable_reg);
- } else {
- if (clk->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readw(clk->enable_reg);
- else
- regval32 = omap_readw(clk->enable_reg);
- }
+ if (clk->flags & ENABLE_REG_32BIT)
+ regval32 = __raw_readl(clk->enable_reg);
+ else
+ regval32 = __raw_readw(clk->enable_reg);
if ((regval32 & (1 << clk->enable_bit)) == 0)
return;
@@ -659,7 +733,7 @@
}
printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
- clk->disable(clk);
+ clk->ops->disable(clk);
printk(" done\n");
}
@@ -677,10 +751,10 @@
int __init omap1_clk_init(void)
{
- struct clk ** clkp;
+ struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
- u32 reg;
+ u32 reg, cpu_mask;
#ifdef CONFIG_DEBUG_LL
/* Resets some clocks that may be left on from bootloader,
@@ -700,28 +774,25 @@
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
- for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
- if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
- clk_register(*clkp);
- continue;
- }
+ for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+ clk_init_one(c->lk.clk);
- if (((*clkp)->flags &CLOCK_IN_OMAP16XX) && cpu_is_omap16xx()) {
- clk_register(*clkp);
- continue;
- }
+ cpu_mask = 0;
+ if (cpu_is_omap16xx())
+ cpu_mask |= CK_16XX;
+ if (cpu_is_omap1510())
+ cpu_mask |= CK_1510;
+ if (cpu_is_omap730())
+ cpu_mask |= CK_730;
+ if (cpu_is_omap310())
+ cpu_mask |= CK_310;
- if (((*clkp)->flags &CLOCK_IN_OMAP730) && cpu_is_omap730()) {
- clk_register(*clkp);
- continue;
+ for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+ if (c->cpu & cpu_mask) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
}
- if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
- clk_register(*clkp);
- continue;
- }
- }
-
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
if (!cpu_is_omap15xx())
@@ -769,7 +840,6 @@
}
}
}
- propagate_rate(&ck_dpll1);
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
@@ -778,9 +848,9 @@
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
- propagate_rate(&ck_dpll1);
}
#endif
+ propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
@@ -832,4 +902,3 @@
return 0;
}
-
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index c1dcdf1..17f8742 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -13,27 +13,22 @@
#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
-static int omap1_clk_enable_generic(struct clk * clk);
-static void omap1_clk_disable_generic(struct clk * clk);
-static void omap1_ckctl_recalc(struct clk * clk);
-static void omap1_watchdog_recalc(struct clk * clk);
+static unsigned long omap1_ckctl_recalc(struct clk *clk);
+static unsigned long omap1_watchdog_recalc(struct clk *clk);
static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static void omap1_sossi_recalc(struct clk *clk);
-static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
-static int omap1_clk_enable_dsp_domain(struct clk * clk);
+static unsigned long omap1_sossi_recalc(struct clk *clk);
+static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static void omap1_clk_disable_dsp_domain(struct clk * clk);
static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static void omap1_uart_recalc(struct clk * clk);
-static int omap1_clk_enable_uart_functional(struct clk * clk);
-static void omap1_clk_disable_uart_functional(struct clk * clk);
+static unsigned long omap1_uart_recalc(struct clk *clk);
static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
static void omap1_init_ext_clk(struct clk * clk);
static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-static int omap1_clk_enable(struct clk *clk);
-static void omap1_clk_disable(struct clk *clk);
+
+static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
struct mpu_rate {
unsigned long rate;
@@ -152,101 +147,84 @@
static struct clk ck_ref = {
.name = "ck_ref",
+ .ops = &clkops_null,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk ck_dpll1 = {
.name = "ck_dpll1",
+ .ops = &clkops_null,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct arm_idlect1_clk ck_dpll1out = {
.clk = {
.name = "ck_dpll1out",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
- ENABLE_REG_32BIT | RATE_PROPAGATES,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 12,
};
static struct clk sossi_ck = {
.name = "ck_sossi",
+ .ops = &clkops_generic,
.parent = &ck_dpll1out.clk,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
- ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_1,
+ .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
.enable_bit = 16,
.recalc = &omap1_sossi_recalc,
.set_rate = &omap1_set_sossi_rate,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk arm_ck = {
.name = "arm_ck",
+ .ops = &clkops_null,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
- ALWAYS_ENABLED,
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk armper_ck = {
.clk = {
.name = "armper_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_CKCTL |
- CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 2,
};
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct arm_idlect1_clk armxor_ck = {
.clk = {
.name = "armxor_ck",
+ .ops = &clkops_generic,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 1,
};
@@ -254,14 +232,12 @@
static struct arm_idlect1_clk armtim_ck = {
.clk = {
.name = "armtim_ck",
+ .ops = &clkops_generic,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 9,
};
@@ -269,201 +245,166 @@
static struct arm_idlect1_clk armwdt_ck = {
.clk = {
.name = "armwdt_ck",
+ .ops = &clkops_generic,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 0,
};
static struct clk arminth_ck16xx = {
.name = "arminth_ck",
+ .ops = &clkops_null,
.parent = &arm_ck,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
/* Note: On 16xx the frequency can be divided by 2 by programming
* ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
*
* 1510 version is in TC clocks.
*/
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk dsp_ck = {
.name = "dsp_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL,
- .enable_reg = (void __iomem *)ARM_CKCTL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL),
.enable_bit = EN_DSPCK,
.rate_offset = CKCTL_DSPDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspmmu_ck = {
.name = "dspmmu_ck",
+ .ops = &clkops_null,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | ALWAYS_ENABLED,
.rate_offset = CKCTL_DSPMMUDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct clk dspper_ck = {
.name = "dspper_ck",
+ .ops = &clkops_dspck,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- RATE_CKCTL | VIRTUAL_IO_ADDRESS,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
.recalc = &omap1_ckctl_recalc_dsp_domain,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = &omap1_clk_set_rate_dsp_domain,
- .enable = &omap1_clk_enable_dsp_domain,
- .disable = &omap1_clk_disable_dsp_domain,
};
static struct clk dspxor_ck = {
.name = "dspxor_ck",
+ .ops = &clkops_dspck,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_IO_ADDRESS,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_dsp_domain,
- .disable = &omap1_clk_disable_dsp_domain,
};
static struct clk dsptim_ck = {
.name = "dsptim_ck",
+ .ops = &clkops_dspck,
.parent = &ck_ref,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_IO_ADDRESS,
.enable_reg = DSP_IDLECT2,
.enable_bit = EN_DSPTIMCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_dsp_domain,
- .disable = &omap1_clk_disable_dsp_domain,
};
/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
static struct arm_idlect1_clk tc_ck = {
.clk = {
.name = "tc_ck",
+ .ops = &clkops_null,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
- RATE_CKCTL | RATE_PROPAGATES |
- ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
+ .flags = CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 6,
};
static struct clk arminth_ck1510 = {
.name = "arminth_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ALWAYS_ENABLED,
.recalc = &followparent_recalc,
/* Note: On 1510 the frequency follows TC_CK
*
* 16xx version is in MPU clocks.
*/
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.name = "tipb_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk l3_ocpi_ck = {
/* No-idle controlled by "tc_ck" */
.name = "l3_ocpi_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)ARM_IDLECT3,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_OCPI_CK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk tc1_ck = {
.name = "tc1_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)ARM_IDLECT3,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC1_CK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk tc2_ck = {
.name = "tc2_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)ARM_IDLECT3,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3),
.enable_bit = EN_TC2_CK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk dma_ck = {
/* No-idle controlled by "tc_ck" */
.name = "dma_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk dma_lcdfree_ck = {
.name = "dma_lcdfree_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct arm_idlect1_clk api_ck = {
.clk = {
.name = "api_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 8,
};
@@ -471,276 +412,238 @@
static struct arm_idlect1_clk lb_ck = {
.clk = {
.name = "lb_ck",
+ .ops = &clkops_generic,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
},
.idlect_shift = 4,
};
static struct clk rhea1_ck = {
.name = "rhea1_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk rhea2_ck = {
.name = "rhea2_ck",
+ .ops = &clkops_null,
.parent = &tc_ck.clk,
- .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk lcd_ck_16xx = {
.name = "lcd_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP16XX | CLOCK_IN_OMAP730 | RATE_CKCTL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
};
static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.name = "lcd_ck",
+ .ops = &clkops_generic,
.parent = &ck_dpll1,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- RATE_CKCTL | CLOCK_IDLE_CONTROL,
- .enable_reg = (void __iomem *)ARM_IDLECT2,
+ .flags = CLOCK_IDLE_CONTROL,
+ .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2),
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .round_rate = omap1_clk_round_rate_ckctl_arm,
+ .set_rate = omap1_clk_set_rate_ckctl_arm,
},
.idlect_shift = 3,
};
static struct clk uart1_1510 = {
.name = "uart1_ck",
+ .ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ENABLE_REG_32BIT | ALWAYS_ENABLED |
- CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct uart_clk uart1_16xx = {
.clk = {
.name = "uart1_ck",
+ .ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
- ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT |
+ CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 29,
- .enable = &omap1_clk_enable_uart_functional,
- .disable = &omap1_clk_disable_uart_functional,
},
.sysc_addr = 0xfffb0054,
};
static struct clk uart2_ck = {
.name = "uart2_ck",
+ .ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
- ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk uart3_1510 = {
.name = "uart3_ck",
+ .ops = &clkops_null,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- ENABLE_REG_32BIT | ALWAYS_ENABLED |
- CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct uart_clk uart3_16xx = {
.clk = {
.name = "uart3_ck",
+ .ops = &clkops_uart,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED |
- ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT |
+ CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 31,
- .enable = &omap1_clk_enable_uart_functional,
- .disable = &omap1_clk_disable_uart_functional,
},
.sysc_addr = 0xfffb9854,
};
static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
.name = "usb_clko",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 6000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
.enable_bit = USB_MCLK_EN_BIT,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk usb_hhc_ck1510 = {
.name = "usb_hhc_ck",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = USB_HOST_HHC_UHOST_EN,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk usb_hhc_ck16xx = {
.name = "usb_hhc_ck",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
- .flags = CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT,
- .enable_reg = (void __iomem *)OTG_BASE + 0x08 /* OTG_SYSCON_2 */,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT,
+ .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
.enable_bit = 8 /* UHOST_EN */,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk usb_dc_ck = {
.name = "usb_dc_ck",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent */
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED,
- .enable_reg = (void __iomem *)SOFT_REQ_REG,
+ .flags = RATE_FIXED,
+ .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = 4,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk mclk_1510 = {
.name = "mclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
- .enable_reg = (void __iomem *)SOFT_REQ_REG,
- .enable_bit = 6,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .flags = RATE_FIXED,
+ .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+ .enable_bit = 6,
};
static struct clk mclk_16xx = {
.name = "mclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)COM_CLK_DIV_CTRL_SEL,
+ .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
.enable_bit = COM_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk bclk_1510 = {
.name = "bclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
+ .flags = RATE_FIXED,
};
static struct clk bclk_16xx = {
.name = "bclk",
+ .ops = &clkops_generic,
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
- .flags = CLOCK_IN_OMAP16XX,
- .enable_reg = (void __iomem *)SWD_CLK_DIV_CTRL_SEL,
+ .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
.enable_bit = SWD_ULPD_PLL_CLK_REQ,
.set_rate = &omap1_set_ext_clk_rate,
.round_rate = &omap1_round_ext_clk_rate,
.init = &omap1_init_ext_clk,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk mmc1_ck = {
.name = "mmc_ck",
+ .ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
- CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 23,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk mmc2_ck = {
.name = "mmc_ck",
.id = 1,
+ .ops = &clkops_generic,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX |
- RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
- .enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
+ .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+ .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
.enable_bit = 20,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk virtual_ck_mpu = {
.name = "mpu",
- .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
+ .ops = &clkops_null,
.parent = &arm_ck, /* Is smarter alias for */
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
.round_rate = &omap1_round_to_table_rate,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
@@ -748,78 +651,19 @@
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
- .flags = CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
- VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
- ALWAYS_ENABLED,
+ .ops = &clkops_null,
+ .flags = CLOCK_NO_IDLE_PARENT,
.parent = &armxor_ck.clk,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
};
static struct clk i2c_ick = {
.name = "i2c_ick",
.id = 1,
- .flags = CLOCK_IN_OMAP16XX |
- VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
- ALWAYS_ENABLED,
+ .ops = &clkops_null,
+ .flags = CLOCK_NO_IDLE_PARENT,
.parent = &armper_ck.clk,
.recalc = &followparent_recalc,
- .enable = &omap1_clk_enable_generic,
- .disable = &omap1_clk_disable_generic,
-};
-
-static struct clk * onchip_clks[] = {
- /* non-ULPD clocks */
- &ck_ref,
- &ck_dpll1,
- /* CK_GEN1 clocks */
- &ck_dpll1out.clk,
- &sossi_ck,
- &arm_ck,
- &armper_ck.clk,
- &arm_gpio_ck,
- &armxor_ck.clk,
- &armtim_ck.clk,
- &armwdt_ck.clk,
- &arminth_ck1510, &arminth_ck16xx,
- /* CK_GEN2 clocks */
- &dsp_ck,
- &dspmmu_ck,
- &dspper_ck,
- &dspxor_ck,
- &dsptim_ck,
- /* CK_GEN3 clocks */
- &tc_ck.clk,
- &tipb_ck,
- &l3_ocpi_ck,
- &tc1_ck,
- &tc2_ck,
- &dma_ck,
- &dma_lcdfree_ck,
- &api_ck.clk,
- &lb_ck.clk,
- &rhea1_ck,
- &rhea2_ck,
- &lcd_ck_16xx,
- &lcd_ck_1510.clk,
- /* ULPD clocks */
- &uart1_1510,
- &uart1_16xx.clk,
- &uart2_ck,
- &uart3_1510,
- &uart3_16xx.clk,
- &usb_clko,
- &usb_hhc_ck1510, &usb_hhc_ck16xx,
- &usb_dc_ck,
- &mclk_1510, &mclk_16xx,
- &bclk_1510, &bclk_16xx,
- &mmc1_ck,
- &mmc2_ck,
- /* Virtual clocks */
- &virtual_ck_mpu,
- &i2c_fck,
- &i2c_ick,
};
#endif
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ba5d7c0..bbbaeb0 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -86,7 +86,7 @@
};
static struct platform_device mbox_device = {
- .name = "mailbox",
+ .name = "omap1-mailbox",
.id = -1,
.num_resources = ARRAY_SIZE(mbox_resources),
.resource = mbox_resources,
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 89bb875..4ef26fa 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,6 +38,7 @@
{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+ { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
@@ -77,7 +78,7 @@
prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
omap_id = omap_readl(OMAP32_ID_1);
- /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+ /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
if (((prod_id >> 20) == 0) || (prod_id == omap_id))
prod_id = 0;
else
@@ -178,6 +179,7 @@
switch (cpu_type) {
case 0x07:
+ case 0x08:
omap_revision |= 0x07;
break;
case 0x03:
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 4c3e582..3afe540 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -52,6 +52,22 @@
};
#endif
+#ifdef CONFIG_ARCH_OMAP850
+static struct map_desc omap850_io_desc[] __initdata = {
+ {
+ .virtual = OMAP850_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP850_DSP_START),
+ .length = OMAP850_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP850_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP850_DSPREG_START),
+ .length = OMAP850_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
+};
+#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
static struct map_desc omap1510_io_desc[] __initdata = {
{
@@ -109,6 +125,13 @@
iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
}
#endif
+
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+ }
+#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 9ad5197..de03c84 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -145,6 +145,14 @@
};
#endif
+#ifdef CONFIG_ARCH_OMAP850
+static struct omap_irq_bank omap850_irq_banks[] = {
+ { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
+ { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
+ { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
+};
+#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_irq_bank omap1510_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
@@ -184,6 +192,12 @@
irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
}
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ irq_banks = omap850_irq_banks;
+ irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+ }
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
irq_banks = omap1510_irq_banks;
@@ -214,9 +228,8 @@
irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
/* Enable interrupts in global mask */
- if (cpu_is_omap730()) {
+ if (cpu_is_omap7xx())
irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
- }
/* Install the interrupt handlers for each bank */
for (i = 0; i < irq_bank_count; i++) {
@@ -236,6 +249,8 @@
if (cpu_is_omap730())
omap_unmask_irq(INT_730_IH2_IRQ);
+ else if (cpu_is_omap850())
+ omap_unmask_irq(INT_850_IH2_IRQ);
else if (cpu_is_omap15xx())
omap_unmask_irq(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 59abbf3..0af4d6c 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -1,7 +1,7 @@
/*
* Mailbox reservation modules for DSP
*
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
* Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -27,7 +27,7 @@
#define MAILBOX_DSP2ARM1_Flag 0x1c
#define MAILBOX_DSP2ARM2_Flag 0x20
-unsigned long mbox_base;
+static void __iomem *mbox_base;
struct omap_mbox1_fifo {
unsigned long cmd;
@@ -40,14 +40,14 @@
struct omap_mbox1_fifo rx_fifo;
};
-static inline int mbox_read_reg(unsigned int reg)
+static inline int mbox_read_reg(size_t ofs)
{
- return __raw_readw(mbox_base + reg);
+ return __raw_readw(mbox_base + ofs);
}
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
{
- __raw_writew(val, mbox_base + reg);
+ __raw_writew(val, mbox_base + ofs);
}
/* msg */
@@ -143,7 +143,7 @@
};
EXPORT_SYMBOL(mbox_dsp_info);
-static int __init omap1_mbox_probe(struct platform_device *pdev)
+static int __devinit omap1_mbox_probe(struct platform_device *pdev)
{
struct resource *res;
int ret = 0;
@@ -170,12 +170,10 @@
}
mbox_dsp_info.irq = res->start;
- ret = omap_mbox_register(&mbox_dsp_info);
-
- return ret;
+ return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
}
-static int omap1_mbox_remove(struct platform_device *pdev)
+static int __devexit omap1_mbox_remove(struct platform_device *pdev)
{
omap_mbox_unregister(&mbox_dsp_info);
@@ -184,9 +182,9 @@
static struct platform_driver omap1_mbox_driver = {
.probe = omap1_mbox_probe,
- .remove = omap1_mbox_remove,
+ .remove = __devexit_p(omap1_mbox_remove),
.driver = {
- .name = "mailbox",
+ .name = "omap1-mailbox",
},
};
@@ -203,4 +201,7 @@
module_init(omap1_mbox_init);
module_exit(omap1_mbox_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 575ba31..d040c3f 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -28,9 +28,9 @@
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
-#endif
+static int dsp_use;
+static struct clk *api_clk;
+static struct clk *dsp_clk;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -39,20 +39,40 @@
* are DSP public peripherals.
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
- omap_dsp_request_mem();
- /*
- * DSP external peripheral reset
- * FIXME: This should be moved to dsp code
- */
- __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
- DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+ if (dsp_use++ == 0) {
+ api_clk = clk_get(NULL, "api_clk");
+ dsp_clk = clk_get(NULL, "dsp_clk");
+ if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
+ clk_enable(api_clk);
+ clk_enable(dsp_clk);
+
+ omap_dsp_request_mem();
+ /*
+ * DSP external peripheral reset
+ * FIXME: This should be moved to dsp code
+ */
+ __raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+ DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+ }
+ }
}
}
static void omap1_mcbsp_free(unsigned int id)
{
- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
- omap_dsp_release_mem();
+ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+ if (--dsp_use == 0) {
+ omap_dsp_release_mem();
+ if (!IS_ERR(api_clk)) {
+ clk_disable(api_clk);
+ clk_put(api_clk);
+ }
+ if (!IS_ERR(dsp_clk)) {
+ clk_disable(dsp_clk);
+ clk_put(dsp_clk);
+ }
+ }
+ }
}
static struct omap_mcbsp_ops omap1_mcbsp_ops = {
@@ -94,8 +114,6 @@
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
{
.phys_base = OMAP1510_MCBSP2_BASE,
@@ -112,8 +130,6 @@
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
};
#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
@@ -131,8 +147,6 @@
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
{
.phys_base = OMAP1610_MCBSP2_BASE,
@@ -149,8 +163,6 @@
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 3,
},
};
#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 062c905..721e0d9 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -58,6 +58,25 @@
#define OMAP730_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP730 */
+#ifdef CONFIG_ARCH_OMAP850
+struct pin_config __initdata_or_module omap850_pins[] = {
+MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0)
+MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0)
+MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0)
+MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0)
+MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0)
+MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0)
+MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0)
+MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0)
+MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0)
+MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0)
+
+MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0)
+MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0)
+MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0)
+};
+#endif
+
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
static struct pin_config __initdata_or_module omap1xxx_pins[] = {
/*
@@ -419,6 +438,11 @@
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->pull_name, cfg->pull_reg, pull_orig, pull);
}
+
+#ifdef CONFIG_ARCH_OMAP850
+ omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
+#endif
+
#endif
#ifdef CONFIG_OMAP_MUX_ERRORS
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0002084..842090b 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -121,6 +121,13 @@
serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
}
+ if (cpu_is_omap850()) {
+ serial_platform_data[0].regshift = 0;
+ serial_platform_data[1].regshift = 0;
+ serial_platform_data[0].irq = INT_850_UART_MODEM_1;
+ serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+ }
+
if (cpu_is_omap15xx()) {
serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3754b79..64ab386 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -58,4 +58,12 @@
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
- depends on ARCH_OMAP3 && ARCH_OMAP34XX
\ No newline at end of file
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3430SDP
+ bool "OMAP 3430 SDP board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_NOKIA_RX51
+ bool "Nokia RX-51 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bbd12bc..a2c3fcc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
clockdomain.o
@@ -14,6 +14,10 @@
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
+# SMS/SDRC
+obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
+# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
+
# Power Management
ifeq ($(CONFIG_PM),y)
obj-y += pm.o
@@ -38,4 +42,12 @@
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
+ mmc-twl4030.o
+obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
+ board-rx51-peripherals.o \
+# Platform specific device init code
+ifeq ($(CONFIG_USB_MUSB_SOC),y)
+obj-y += usb-musb.o
+endif
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 83fa372..2214365 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -35,12 +35,16 @@
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
+#define SDP2430_CS0_BASE 0x04000000
#define SDP2430_FLASH_CS 0
#define SDP2430_SMC91X_CS 5
+#define SDP2430_ETHR_GPIO_IRQ 149
+
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@@ -102,8 +106,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+ .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
@@ -170,13 +174,13 @@
sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
udelay(100);
- if (gpio_request(OMAP24XX_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
+ if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- OMAP24XX_ETHR_GPIO_IRQ);
+ SDP2430_ETHR_GPIO_IRQ);
gpmc_cs_free(eth_cs);
goto out;
}
- gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
+ gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
@@ -185,7 +189,7 @@
static void __init omap_2430sdp_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
sdp2430_init_smc91x();
@@ -251,6 +255,7 @@
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap_serial_init();
twl4030_mmc_init(mmc);
+ usb_musb_init();
}
static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
new file mode 100644
index 0000000..ed92749
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -0,0 +1,542 @@
+/*
+ * linux/arch/arm/mach-omap2/board-3430sdp.c
+ *
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+
+#include <mach/control.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+#define CONFIG_DISABLE_HFCLK 1
+
+#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29
+#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6
+#define SDP3430_SMC91X_CS 3
+
+#define SDP3430_TS_GPIO_IRQ_SDPV1 3
+#define SDP3430_TS_GPIO_IRQ_SDPV2 2
+
+#define ENABLE_VAUX3_DEDICATED 0x03
+#define ENABLE_VAUX3_DEV_GRP 0x20
+
+#define TWL4030_MSECURE_GPIO 22
+
+static struct resource sdp3430_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device sdp3430_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources),
+ .resource = sdp3430_smc91x_resources,
+};
+
+static int sdp3430_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(0, 4, KEY_C),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(1, 4, KEY_G),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_3),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P),
+ KEY(3, 4, KEY_Q),
+ KEY(4, 0, KEY_R),
+ KEY(4, 1, KEY_4),
+ KEY(4, 2, KEY_T),
+ KEY(4, 3, KEY_U),
+ KEY(4, 4, KEY_D),
+ KEY(5, 0, KEY_V),
+ KEY(5, 1, KEY_W),
+ KEY(5, 2, KEY_L),
+ KEY(5, 3, KEY_S),
+ KEY(5, 4, KEY_H),
+ 0
+};
+
+static struct twl4030_keypad_data sdp3430_kp_data = {
+ .rows = 5,
+ .cols = 6,
+ .keymap = sdp3430_keymap,
+ .keymapsize = ARRAY_SIZE(sdp3430_keymap),
+ .rep = 1,
+};
+
+static int ts_gpio; /* Needed for ads7846_get_pendown_state */
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
+};
+
+static struct platform_device sdp3430_lcd_device = {
+ .name = "sdp2430_lcd",
+ .id = -1,
+};
+
+static struct regulator_consumer_supply sdp3430_vdac_supply = {
+ .supply = "vdac",
+ .dev = &sdp3430_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &sdp3430_lcd_device.dev,
+};
+
+static struct platform_device *sdp3430_devices[] __initdata = {
+ &sdp3430_smc91x_device,
+ &sdp3430_lcd_device,
+};
+
+static inline void __init sdp3430_init_smc91x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = SDP3430_SMC91X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
+ sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ udelay(100);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
+ else
+ eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
+
+ sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
+
+ if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+static void __init omap_3430sdp_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+ sdp3430_init_smc91x();
+}
+
+static struct omap_uart_config sdp3430_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config sdp3430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel sdp3430_config[] __initdata = {
+ { OMAP_TAG_UART, &sdp3430_uart_config },
+ { OMAP_TAG_LCD, &sdp3430_lcd_config },
+};
+
+static int sdp3430_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
+4040, 3910, 3790, 3670, 3550
+};
+
+static struct twl4030_bci_platform_data sdp3430_bci_data = {
+ .battery_tmp_tbl = sdp3430_batt_table,
+ .tblsize = ARRAY_SIZE(sdp3430_batt_table),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ /* 8 bits (default) requires S6.3 == ON,
+ * so the SIM card isn't used; else 4 bits.
+ */
+ .wires = 8,
+ .gpio_wp = 4,
+ },
+ {
+ .mmc = 2,
+ .wires = 8,
+ .gpio_wp = 7,
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply sdp3430_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
+static int sdp3430_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ),
+ * gpio + 1 is "mmc1_cd" (input/IRQ)
+ */
+ mmc[0].gpio_cd = gpio + 0;
+ mmc[1].gpio_cd = gpio + 1;
+ twl4030_mmc_init(mmc);
+
+ /* link regulators to MMC adapters ... we "know" the
+ * regulators will be set up only *after* we return.
+ */
+ sdp3430_vmmc1_supply.dev = mmc[0].dev;
+ sdp3430_vsim_supply.dev = mmc[0].dev;
+ sdp3430_vmmc2_supply.dev = mmc[1].dev;
+
+ /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
+ gpio_request(gpio + 7, "sub_lcd_en_bkl");
+ gpio_direction_output(gpio + 7, 0);
+
+ /* gpio + 15 is "sub_lcd_nRST" (output) */
+ gpio_request(gpio + 15, "sub_lcd_nRST");
+ gpio_direction_output(gpio + 15, 0);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
+ | BIT(16) | BIT(17),
+ .setup = sdp3430_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data sdp3430_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_madc_platform_data sdp3430_madc_data = {
+ .irq_line = 1,
+};
+
+/*
+ * Apply all the fixed voltages since most versions of U-Boot
+ * don't bother with that initialization.
+ */
+
+/* VAUX1 for mainboard (irda and sub-lcd) */
+static struct regulator_init_data sdp3430_vaux1 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX2 for camera module */
+static struct regulator_init_data sdp3430_vaux2 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX3 for LCD board */
+static struct regulator_init_data sdp3430_vaux3 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX4 for OMAP VDD_CSI2 (camera) */
+static struct regulator_init_data sdp3430_vaux4 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp3430_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data sdp3430_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 1850000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data sdp3430_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data sdp3430_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data sdp3430_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vdvi_supply,
+};
+
+static struct twl4030_platform_data sdp3430_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .bci = &sdp3430_bci_data,
+ .gpio = &sdp3430_gpio_data,
+ .madc = &sdp3430_madc_data,
+ .keypad = &sdp3430_kp_data,
+ .usb = &sdp3430_usb_data,
+
+ .vaux1 = &sdp3430_vaux1,
+ .vaux2 = &sdp3430_vaux2,
+ .vaux3 = &sdp3430_vaux3,
+ .vaux4 = &sdp3430_vaux4,
+ .vmmc1 = &sdp3430_vmmc1,
+ .vmmc2 = &sdp3430_vmmc2,
+ .vsim = &sdp3430_vsim,
+ .vdac = &sdp3430_vdac,
+ .vpll2 = &sdp3430_vpll2,
+};
+
+static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &sdp3430_twldata,
+ },
+};
+
+static int __init omap3430_i2c_init(void)
+{
+ /* i2c1 for PMIC only */
+ omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
+ ARRAY_SIZE(sdp3430_i2c_boardinfo));
+ /* i2c2 on camera connector (for sensor control) and optional isp1301 */
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ /* i2c3 on display connector (for DVI, tfp410) */
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static void __init omap_3430sdp_init(void)
+{
+ omap3430_i2c_init();
+ platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
+ omap_board_config = sdp3430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+ else
+ ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
+ sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(sdp3430_spi_board_info,
+ ARRAY_SIZE(sdp3430_spi_board_info));
+ ads7846_dev_init();
+ omap_serial_init();
+ usb_musb_init();
+}
+
+static void __init omap_3430sdp_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
+ /* Maintainer: Syed Khasim - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_3430sdp_map_io,
+ .init_irq = omap_3430sdp_init_irq,
+ .init_machine = omap_3430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 0a7b24ba..06dfba8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -51,6 +51,7 @@
#define APOLLON_FLASH_CS 0
#define APOLLON_ETH_CS 1
+#define APOLLON_ETHR_GPIO_IRQ 74
static struct mtd_partition apollon_partitions[] = {
{
@@ -249,7 +250,7 @@
static void __init omap_apollon_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
@@ -272,7 +273,6 @@
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
- { OMAP_TAG_USB, &apollon_usb_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
@@ -299,6 +299,7 @@
omap_cfg_reg(P21_242X_GPIO12);
gpio_request(12, "USB suspend");
gpio_direction_output(12, 0);
+ omap_usb_init(&apollon_usb_config);
}
static void __init omap_apollon_init(void)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3b34c20..3492162 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@
static void __init omap_generic_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5e9b146..a0267a9 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -47,6 +47,8 @@
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
+#define H4_ETHR_GPIO_IRQ 92
+
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
@@ -341,7 +343,7 @@
udelay(100);
omap_cfg_reg(M15_24XX_GPIO92);
- if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+ if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
out:
@@ -363,7 +365,7 @@
static void __init omap_h4_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
@@ -377,6 +379,39 @@
.ctrl_name = "internal",
};
+static struct omap_usb_config h4_usb_config __initdata = {
+#ifdef CONFIG_MACH_OMAP2_H4_USB1
+ /* NOTE: usb1 could also be used with 3 wire signaling */
+ .pins[1] = 4,
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4_OTG
+ /* S1.10 ON -- USB OTG port
+ * usb0 switched to Mini-AB port and isp1301 transceiver;
+ * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
+ */
+ .otg = 1,
+ .pins[0] = 4,
+#ifdef CONFIG_USB_GADGET_OMAP
+ /* use OTG cable, or standard A-to-MiniB */
+ .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* use OTG cable, or NONSTANDARD (B-to-MiniB) */
+ .hmc_mode = 0x11, /* 0:host 1:host 2:disable */
+#endif /* XX */
+
+#else
+ /* S1.10 OFF -- usb "download port"
+ * usb0 switched to Mini-B port and isp1105 transceiver;
+ * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
+ */
+ .register_dev = 1,
+ .pins[0] = 3,
+/* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */
+ .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
+#endif
+};
+
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
@@ -428,6 +463,7 @@
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
+ omap_usb_init(&h4_usb_config);
omap_serial_init();
}
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f6a1345..e096f77 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,31 +22,34 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board-ldp.h>
#include <mach/mcspi.h>
#include <mach/gpio.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpmc.h>
-#include <asm/io.h>
#include <asm/delay.h>
#include <mach/control.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
-#define SDP3430_SMC91X_CS 3
+#define LDP_SMC911X_CS 1
+#define LDP_SMC911X_GPIO 152
+#define DEBUG_BASE 0x08000000
+#define LDP_ETHR_START DEBUG_BASE
static struct resource ldp_smc911x_resources[] = {
[0] = {
- .start = OMAP34XX_ETHR_START,
- .end = OMAP34XX_ETHR_START + SZ_4K,
+ .start = LDP_ETHR_START,
+ .end = LDP_ETHR_START + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -81,7 +84,7 @@
}
ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
- ldp_smc911x_resources[0].end = cs_mem_base + 0xf;
+ ldp_smc911x_resources[0].end = cs_mem_base + 0xff;
udelay(100);
eth_gpio = LDP_SMC911X_GPIO;
@@ -98,7 +101,7 @@
static void __init omap_ldp_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smc911x();
@@ -162,6 +165,7 @@
omap_board_config_size = ARRAY_SIZE(ldp_config);
omap_serial_init();
twl4030_mmc_init(mmc);
+ usb_musb_init();
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 38c88fb..744740a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@
#include <mach/gpmc.h>
#include <mach/nand.h>
#include <mach/mux.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
@@ -175,16 +176,15 @@
{
omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
ARRAY_SIZE(beagle_i2c_boardinfo));
-#ifdef CONFIG_I2C2_OMAP_BEAGLE
- omap_register_i2c_bus(2, 400, NULL, 0);
-#endif
- omap_register_i2c_bus(3, 400, NULL, 0);
+ /* Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz */
+ omap_register_i2c_bus(3, 100, NULL, 0);
return 0;
}
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
@@ -314,6 +314,7 @@
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
+ usb_musb_init();
omap3beagle_flash_init();
}
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b319610..402f09c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -34,6 +34,7 @@
#include <mach/gpio.h>
#include <mach/hardware.h>
#include <mach/mcspi.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
@@ -53,6 +54,13 @@
.gpio_cd = -EINVAL,
.gpio_wp = 127,
.ext_clock = 1,
+ .transceiver = true,
+ },
+ {
+ .mmc = 3,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
},
{} /* Terminator */
};
@@ -110,7 +118,7 @@
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
@@ -193,6 +201,7 @@
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
+ usb_musb_init();
}
static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 82b3dc5..b3f6e9d8 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -37,20 +37,85 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/board-overo.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/gpio.h>
#include <mach/gpmc.h>
#include <mach/hardware.h>
#include <mach/nand.h>
+#include <mach/usb.h>
#include "mmc-twl4030.h"
+#define OVERO_GPIO_BT_XGATE 15
+#define OVERO_GPIO_W2W_NRESET 16
+#define OVERO_GPIO_BT_NRESET 164
+#define OVERO_GPIO_USBH_CPEN 168
+#define OVERO_GPIO_USBH_NRESET 183
+
#define NAND_BLOCK_SIZE SZ_128K
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#include <mach/mcspi.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OVERO_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+ .platform_data = &ads7846_config,
+ }
+};
+
+static void __init overo_ads7846_init(void)
+{
+ if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+ (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) {
+ gpio_export(OVERO_GPIO_PENDOWN, 0);
+ } else {
+ printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
+ return;
+ }
+
+ spi_register_board_info(overo_spi_board_info,
+ ARRAY_SIZE(overo_spi_board_info));
+}
+
+#else
+static inline void __init overo_ads7846_init(void) { return; }
+#endif
+
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@@ -174,7 +239,7 @@
static void __init overo_init_irq(void)
{
- omap2_init_common_hw();
+ omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
}
@@ -209,6 +274,7 @@
.wires = 4,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .transceiver = true,
},
{} /* Terminator */
};
@@ -222,6 +288,8 @@
omap_serial_init();
twl4030_mmc_init(mmc);
overo_flash_init();
+ usb_musb_init();
+ overo_ads7846_init();
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
new file mode 100644
index 0000000..a738172
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -0,0 +1,419 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ *
+ * Copyright (C) 2008-2009 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/keypad.h>
+
+#include "mmc-twl4030.h"
+
+
+#define SMC91X_CS 1
+#define SMC91X_GPIO_IRQ 54
+#define SMC91X_GPIO_RESET 164
+#define SMC91X_GPIO_PWRDWN 86
+
+static struct resource rx51_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device rx51_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rx51_smc91x_resources),
+ .resource = rx51_smc91x_resources,
+};
+
+static int rx51_keymap[] = {
+ KEY(0, 0, KEY_Q),
+ KEY(0, 1, KEY_W),
+ KEY(0, 2, KEY_E),
+ KEY(0, 3, KEY_R),
+ KEY(0, 4, KEY_T),
+ KEY(0, 5, KEY_Y),
+ KEY(0, 6, KEY_U),
+ KEY(0, 7, KEY_I),
+ KEY(1, 0, KEY_O),
+ KEY(1, 1, KEY_D),
+ KEY(1, 2, KEY_DOT),
+ KEY(1, 3, KEY_V),
+ KEY(1, 4, KEY_DOWN),
+ KEY(2, 0, KEY_P),
+ KEY(2, 1, KEY_F),
+ KEY(2, 2, KEY_UP),
+ KEY(2, 3, KEY_B),
+ KEY(2, 4, KEY_RIGHT),
+ KEY(3, 0, KEY_COMMA),
+ KEY(3, 1, KEY_G),
+ KEY(3, 2, KEY_ENTER),
+ KEY(3, 3, KEY_N),
+ KEY(4, 0, KEY_BACKSPACE),
+ KEY(4, 1, KEY_H),
+ KEY(4, 3, KEY_M),
+ KEY(4, 4, KEY_LEFTCTRL),
+ KEY(5, 1, KEY_J),
+ KEY(5, 2, KEY_Z),
+ KEY(5, 3, KEY_SPACE),
+ KEY(5, 4, KEY_LEFTSHIFT),
+ KEY(6, 0, KEY_A),
+ KEY(6, 1, KEY_K),
+ KEY(6, 2, KEY_X),
+ KEY(6, 3, KEY_SPACE),
+ KEY(6, 4, KEY_FN),
+ KEY(7, 0, KEY_S),
+ KEY(7, 1, KEY_L),
+ KEY(7, 2, KEY_C),
+ KEY(7, 3, KEY_LEFT),
+ KEY(0xff, 0, KEY_F6),
+ KEY(0xff, 1, KEY_F7),
+ KEY(0xff, 2, KEY_F8),
+ KEY(0xff, 4, KEY_F9),
+ KEY(0xff, 5, KEY_F10),
+};
+
+static struct twl4030_keypad_data rx51_kp_data = {
+ .rows = 8,
+ .cols = 8,
+ .keymap = rx51_keymap,
+ .keymapsize = ARRAY_SIZE(rx51_keymap),
+ .rep = 1,
+};
+
+static struct platform_device *rx51_peripherals_devices[] = {
+ &rx51_smc91x_device,
+};
+
+/*
+ * Timings are taken from smsc-lan91c96-ms.pdf
+ */
+static int smc91x_init_gpmc(int cs)
+{
+ struct gpmc_timings t;
+ const int t2_r = 45; /* t2 in Figure 12.10 */
+ const int t2_w = 30; /* t2 in Figure 12.11 */
+ const int t3 = 15; /* t3 in Figure 12.10 */
+ const int t5_r = 0; /* t5 in Figure 12.10 */
+ const int t6_r = 45; /* t6 in Figure 12.10 */
+ const int t6_w = 0; /* t6 in Figure 12.11 */
+ const int t7_w = 15; /* t7 in Figure 12.11 */
+ const int t15 = 12; /* t15 in Figure 12.2 */
+ const int t20 = 185; /* t20 in Figure 12.2 */
+
+ memset(&t, 0, sizeof(t));
+
+ t.cs_on = t15;
+ t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
+ t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
+ t.adv_on = t3; /* Figure 12.10 */
+ t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
+ t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
+ t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
+ t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
+ t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
+ t.we_on = t.we_off - t7_w; /* Figure 12.11 */
+ t.rd_cycle = t20; /* Figure 12.2 */
+ t.wr_cycle = t20; /* Figure 12.4 */
+ t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
+ t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
+
+ return gpmc_cs_set_timings(cs, &t);
+}
+
+static void __init rx51_init_smc91x(void)
+{
+ unsigned long cs_mem_base;
+ int ret;
+
+ omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+ omap_cfg_reg(G25_34XX_GPIO86_OUT);
+ omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+ if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
+ rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
+
+ smc91x_init_gpmc(SMC91X_CS);
+
+ if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
+ goto free1;
+
+ gpio_direction_input(SMC91X_GPIO_IRQ);
+ rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
+
+ ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
+ if (ret)
+ goto free2;
+ gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
+
+ ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
+ if (ret)
+ goto free3;
+ gpio_direction_output(SMC91X_GPIO_RESET, 0);
+ gpio_set_value(SMC91X_GPIO_RESET, 1);
+ msleep(100);
+ gpio_set_value(SMC91X_GPIO_RESET, 0);
+
+ return;
+
+free3:
+ gpio_free(SMC91X_GPIO_PWRDWN);
+free2:
+ gpio_free(SMC91X_GPIO_IRQ);
+free1:
+ gpmc_cs_free(SMC91X_CS);
+
+ printk(KERN_ERR "Could not initialize smc91x\n");
+}
+
+static struct twl4030_madc_platform_data rx51_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .name = "external",
+ .mmc = 1,
+ .wires = 4,
+ .cover_only = true,
+ .gpio_cd = 160,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .name = "internal",
+ .mmc = 2,
+ .wires = 8,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply rx51_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply rx51_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+static struct regulator_init_data rx51_vaux1 = {
+ .constraints = {
+ .name = "V28",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data rx51_vaux2 = {
+ .constraints = {
+ .name = "VCSI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+/* VAUX3 - adds more power to VIO_18 rail */
+static struct regulator_init_data rx51_vaux3 = {
+ .constraints = {
+ .name = "VCAM_DIG_18",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data rx51_vaux4 = {
+ .constraints = {
+ .name = "VCAM_ANA_28",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data rx51_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc1_supply,
+};
+
+static struct regulator_init_data rx51_vmmc2 = {
+ .constraints = {
+ .name = "VMMC2_30",
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc2_supply,
+};
+
+static struct regulator_init_data rx51_vsim = {
+ .constraints = {
+ .name = "VMMC2_IO_18",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vsim_supply,
+};
+
+static struct regulator_init_data rx51_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
+{
+ /* FIXME this gpio setup is just a placeholder for now */
+ gpio_request(gpio + 6, "backlight_pwm");
+ gpio_direction_output(gpio + 6, 0);
+ gpio_request(gpio + 7, "speaker_en");
+ gpio_direction_output(gpio + 7, 1);
+
+ /* set up MMC adapters, linking their regulators to them */
+ twl4030_mmc_init(mmc);
+ rx51_vmmc1_supply.dev = mmc[0].dev;
+ rx51_vmmc2_supply.dev = mmc[1].dev;
+ rx51_vsim_supply.dev = mmc[1].dev;
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data rx51_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
+ | BIT(4) | BIT(5)
+ | BIT(8) | BIT(9) | BIT(10) | BIT(11)
+ | BIT(12) | BIT(13) | BIT(14) | BIT(15)
+ | BIT(16) | BIT(17) ,
+ .setup = rx51_twlgpio_setup,
+};
+
+static struct twl4030_platform_data rx51_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &rx51_gpio_data,
+ .keypad = &rx51_kp_data,
+ .madc = &rx51_madc_data,
+
+ .vaux1 = &rx51_vaux1,
+ .vaux2 = &rx51_vaux2,
+ .vaux3 = &rx51_vaux3,
+ .vaux4 = &rx51_vaux4,
+ .vmmc1 = &rx51_vmmc1,
+ .vmmc2 = &rx51_vmmc2,
+ .vsim = &rx51_vsim,
+ .vdac = &rx51_vdac,
+};
+
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
+ {
+ I2C_BOARD_INFO("twl5030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &rx51_twldata,
+ },
+};
+
+static int __init rx51_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+ ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+ omap_register_i2c_bus(2, 100, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+
+void __init rx51_peripherals_init(void)
+{
+ platform_add_devices(rx51_peripherals_devices,
+ ARRAY_SIZE(rx51_peripherals_devices));
+ rx51_i2c_init();
+ rx51_init_smc91x();
+}
+
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
new file mode 100644
index 0000000..3a0daac
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51.c
+ *
+ * Copyright (C) 2007, 2008 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mcspi.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
+#include <mach/usb.h>
+
+static struct omap_uart_config rx51_uart_config = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_lcd_config rx51_lcd_config = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_fbmem_config rx51_fbmem0_config = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem1_config = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config rx51_fbmem2_config = {
+ .size = 752 * 1024,
+};
+
+static struct omap_board_config_kernel rx51_config[] = {
+ { OMAP_TAG_UART, &rx51_uart_config },
+ { OMAP_TAG_FBMEM, &rx51_fbmem0_config },
+ { OMAP_TAG_FBMEM, &rx51_fbmem1_config },
+ { OMAP_TAG_FBMEM, &rx51_fbmem2_config },
+ { OMAP_TAG_LCD, &rx51_lcd_config },
+};
+
+static void __init rx51_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+extern void __init rx51_peripherals_init(void);
+
+static void __init rx51_init(void)
+{
+ omap_board_config = rx51_config;
+ omap_board_config_size = ARRAY_SIZE(rx51_config);
+ omap_serial_init();
+ usb_musb_init();
+ rx51_peripherals_init();
+}
+
+static void __init rx51_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
+ /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = rx51_map_io,
+ .init_irq = rx51_init_irq,
+ .init_machine = rx51_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ce4d46a..4247a15 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -26,11 +26,10 @@
#include <mach/clock.h>
#include <mach/clockdomain.h>
-#include <mach/sram.h>
#include <mach/cpu.h>
#include <asm/div64.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "sdrc.h"
#include "clock.h"
#include "prm.h"
@@ -46,7 +45,7 @@
#define DPLL_MIN_DIVIDER 1
/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW (1 << 0)
+#define DPLL_MULT_UNDERFLOW -1
/*
* Scale factor to mitigate roundoff errors in DPLL rate rounding.
@@ -59,6 +58,16 @@
#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN 750000
+#define DPLL_FINT_BAND1_MAX 2100000
+#define DPLL_FINT_BAND2_MIN 7500000
+#define DPLL_FINT_BAND2_MAX 21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
u8 cpu_mask;
/*-------------------------------------------------------------------------
@@ -66,6 +75,74 @@
*-------------------------------------------------------------------------*/
/**
+ * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
+ * @clk: struct clk *
+ *
+ * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
+ * don't take effect until the VALID_CONFIG bit is written, write the
+ * VALID_CONFIG bit and wait for the write to complete. No return value.
+ */
+static void _omap2xxx_clk_commit(struct clk *clk)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ if (!(clk->flags & DELAYED_APP))
+ return;
+
+ prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ /* OCP barrier */
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+}
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+ struct dpll_data *dd;
+ long fint;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = clk->parent->rate / (n + 1);
+ if (fint < DPLL_FINT_BAND1_MIN) {
+
+ pr_debug("rejecting n=%d due to Fint failure, "
+ "lowering max_divider\n", n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+
+ } else if (fint > DPLL_FINT_BAND1_MAX &&
+ fint < DPLL_FINT_BAND2_MIN) {
+
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+
+ } else if (fint > DPLL_FINT_BAND2_MAX) {
+
+ pr_debug("rejecting n=%d due to Fint failure, "
+ "boosting min_divider\n", n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+
+ }
+
+ return ret;
+}
+
+/**
* omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
* @clk: OMAP clock struct ptr to use
*
@@ -120,7 +197,7 @@
clk->name, clks->parent->name,
((clk->parent) ?
clk->parent->name : "NULL"));
- clk->parent = clks->parent;
+ clk_reparent(clk, clks->parent);
};
found = 1;
}
@@ -134,25 +211,52 @@
return;
}
-/* Returns the DPLL rate */
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
u32 omap2_get_dpll_rate(struct clk *clk)
{
long long dpll_clk;
- u32 dpll_mult, dpll_div, dpll;
+ u32 dpll_mult, dpll_div, v;
struct dpll_data *dd;
dd = clk->dpll_data;
- /* REVISIT: What do we return on error? */
if (!dd)
return 0;
- dpll = __raw_readl(dd->mult_div1_reg);
- dpll_mult = dpll & dd->mult_mask;
+ /* Return bypass rate if DPLL is bypassed */
+ v = __raw_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (cpu_is_omap24xx()) {
+ if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP2XXX_EN_DPLL_FRBYPASS)
+ return dd->clk_bypass->rate;
+ } else if (cpu_is_omap34xx()) {
+ if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP3XXX_EN_DPLL_FRBYPASS)
+ return dd->clk_bypass->rate;
+ }
+
+ v = __raw_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = dpll & dd->div1_mask;
+ dpll_div = v & dd->div1_mask;
dpll_div >>= __ffs(dd->div1_mask);
- dpll_clk = (long long)clk->parent->rate * dpll_mult;
+ dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
return dpll_clk;
@@ -162,14 +266,11 @@
* Used for clocks that have the same value as the parent clock,
* divided by some factor
*/
-void omap2_fixed_divisor_recalc(struct clk *clk)
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
{
WARN_ON(!clk->fixed_div);
- clk->rate = clk->parent->rate / clk->fixed_div;
-
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
+ return clk->parent->rate / clk->fixed_div;
}
/**
@@ -190,11 +291,10 @@
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
* 34xx reverses this, just to keep us on our toes
*/
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+ if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
ena = mask;
- } else if (cpu_mask & RATE_IN_343X) {
+ else if (cpu_mask & RATE_IN_343X)
ena = 0;
- }
/* Wait for lock */
while (((__raw_readl(reg) & mask) != ena) &&
@@ -228,31 +328,12 @@
* it and pull it into struct clk itself somehow.
*/
reg = clk->enable_reg;
- if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
- (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
- other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
- else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
- (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
- other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
- else
- return;
- /* REVISIT: What are the appropriate exclusions for 34XX? */
- /* No check for DSS or cam clocks */
- if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
- if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
- clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
- clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
- return;
- }
-
- /* REVISIT: What are the appropriate exclusions for 34XX? */
- /* OMAP3: ignore DSS-mod clocks */
- if (cpu_is_omap34xx() &&
- (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
- ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
- clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
- return;
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
/* Check if both functional and interface clocks
* are running. */
@@ -264,18 +345,9 @@
omap2_wait_clock_ready(st_reg, bit, clk->name);
}
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-int _omap2_clk_enable(struct clk *clk)
+static int omap2_dflt_clk_enable(struct clk *clk)
{
- u32 regval32;
-
- if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
- return 0;
-
- if (clk->enable)
- return clk->enable(clk);
+ u32 v;
if (unlikely(clk->enable_reg == NULL)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
@@ -283,33 +355,38 @@
return 0; /* REVISIT: -EINVAL */
}
- regval32 = __raw_readl(clk->enable_reg);
+ v = __raw_readl(clk->enable_reg);
if (clk->flags & INVERT_ENABLE)
- regval32 &= ~(1 << clk->enable_bit);
+ v &= ~(1 << clk->enable_bit);
else
- regval32 |= (1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- wmb();
-
- omap2_clk_wait_ready(clk);
+ v |= (1 << clk->enable_bit);
+ __raw_writel(v, clk->enable_reg);
+ v = __raw_readl(clk->enable_reg); /* OCP barrier */
return 0;
}
-/* Disables clock without considering parent dependencies or use count */
-void _omap2_clk_disable(struct clk *clk)
+static int omap2_dflt_clk_enable_wait(struct clk *clk)
{
- u32 regval32;
+ int ret;
- if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
- return;
-
- if (clk->disable) {
- clk->disable(clk);
- return;
+ if (!clk->enable_reg) {
+ printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ clk->name);
+ return 0; /* REVISIT: -EINVAL */
}
- if (clk->enable_reg == NULL) {
+ ret = omap2_dflt_clk_enable(clk);
+ if (ret == 0)
+ omap2_clk_wait_ready(clk);
+ return ret;
+}
+
+static void omap2_dflt_clk_disable(struct clk *clk)
+{
+ u32 v;
+
+ if (!clk->enable_reg) {
/*
* 'Independent' here refers to a clock which is not
* controlled by its parent.
@@ -319,20 +396,44 @@
return;
}
- regval32 = __raw_readl(clk->enable_reg);
+ v = __raw_readl(clk->enable_reg);
if (clk->flags & INVERT_ENABLE)
- regval32 |= (1 << clk->enable_bit);
+ v |= (1 << clk->enable_bit);
else
- regval32 &= ~(1 << clk->enable_bit);
- __raw_writel(regval32, clk->enable_reg);
- wmb();
+ v &= ~(1 << clk->enable_bit);
+ __raw_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+}
+
+const struct clkops clkops_omap2_dflt_wait = {
+ .enable = omap2_dflt_clk_enable_wait,
+ .disable = omap2_dflt_clk_disable,
+};
+
+const struct clkops clkops_omap2_dflt = {
+ .enable = omap2_dflt_clk_enable,
+ .disable = omap2_dflt_clk_disable,
+};
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int _omap2_clk_enable(struct clk *clk)
+{
+ return clk->ops->enable(clk);
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void _omap2_clk_disable(struct clk *clk)
+{
+ clk->ops->disable(clk);
}
void omap2_clk_disable(struct clk *clk)
{
if (clk->usecount > 0 && !(--clk->usecount)) {
_omap2_clk_disable(clk);
- if (likely((u32)clk->parent))
+ if (clk->parent)
omap2_clk_disable(clk->parent);
if (clk->clkdm)
omap2_clkdm_clk_disable(clk->clkdm, clk);
@@ -345,30 +446,29 @@
int ret = 0;
if (clk->usecount++ == 0) {
- if (likely((u32)clk->parent))
- ret = omap2_clk_enable(clk->parent);
-
- if (unlikely(ret != 0)) {
- clk->usecount--;
- return ret;
- }
-
if (clk->clkdm)
omap2_clkdm_clk_enable(clk->clkdm, clk);
+ if (clk->parent) {
+ ret = omap2_clk_enable(clk->parent);
+ if (ret)
+ goto err;
+ }
+
ret = _omap2_clk_enable(clk);
-
- if (unlikely(ret != 0)) {
- if (clk->clkdm)
- omap2_clkdm_clk_disable(clk->clkdm, clk);
-
- if (clk->parent) {
+ if (ret) {
+ if (clk->parent)
omap2_clk_disable(clk->parent);
- clk->usecount--;
- }
+
+ goto err;
}
}
+ return ret;
+err:
+ if (clk->clkdm)
+ omap2_clkdm_clk_disable(clk->clkdm, clk);
+ clk->usecount--;
return ret;
}
@@ -376,24 +476,22 @@
* Used for clocks that are part of CLKSEL_xyz governed clocks.
* REVISIT: Maybe change to use clk->enable() functions like on omap1?
*/
-void omap2_clksel_recalc(struct clk *clk)
+unsigned long omap2_clksel_recalc(struct clk *clk)
{
+ unsigned long rate;
u32 div = 0;
pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
div = omap2_clksel_get_divisor(clk);
if (div == 0)
- return;
+ return clk->rate;
- if (unlikely(clk->rate == clk->parent->rate / div))
- return;
- clk->rate = clk->parent->rate / div;
+ rate = clk->parent->rate / div;
- pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
+ pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+ return rate;
}
/**
@@ -405,8 +503,8 @@
* the element associated with the supplied parent clock address.
* Returns a pointer to the struct clksel on success or NULL on error.
*/
-const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
- struct clk *src_clk)
+static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+ struct clk *src_clk)
{
const struct clksel *clks;
@@ -455,7 +553,7 @@
*new_div = 1;
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
@@ -514,7 +612,7 @@
/* Given a clock and a rate apply a clock specific rounding function */
long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
{
- if (clk->round_rate != NULL)
+ if (clk->round_rate)
return clk->round_rate(clk, rate);
if (clk->flags & RATE_FIXED)
@@ -540,7 +638,7 @@
const struct clksel_rate *clkr;
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
@@ -576,7 +674,7 @@
WARN_ON(div == 0);
clks = omap2_get_clksel_by_parent(clk, clk->parent);
- if (clks == NULL)
+ if (!clks)
return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
@@ -595,23 +693,6 @@
}
/**
- * omap2_get_clksel - find clksel register addr & field mask for a clk
- * @clk: struct clk to use
- * @field_mask: ptr to u32 to store the register field mask
- *
- * Returns the address of the clksel register upon success or NULL on error.
- */
-void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
-{
- if (unlikely((clk->clksel_reg == NULL) || (clk->clksel_mask == NULL)))
- return NULL;
-
- *field_mask = clk->clksel_mask;
-
- return clk->clksel_reg;
-}
-
-/**
* omap2_clksel_get_divisor - get current divider applied to parent clock.
* @clk: OMAP struct clk to use.
*
@@ -619,49 +700,41 @@
*/
u32 omap2_clksel_get_divisor(struct clk *clk)
{
- u32 field_mask, field_val;
- void __iomem *div_addr;
+ u32 v;
- div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == NULL)
+ if (!clk->clksel_mask)
return 0;
- field_val = __raw_readl(div_addr) & field_mask;
- field_val >>= __ffs(field_mask);
+ v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ v >>= __ffs(clk->clksel_mask);
- return omap2_clksel_to_divisor(clk, field_val);
+ return omap2_clksel_to_divisor(clk, v);
}
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
{
- u32 field_mask, field_val, reg_val, validrate, new_div = 0;
- void __iomem *div_addr;
+ u32 v, field_val, validrate, new_div = 0;
+
+ if (!clk->clksel_mask)
+ return -EINVAL;
validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
if (validrate != rate)
return -EINVAL;
- div_addr = omap2_get_clksel(clk, &field_mask);
- if (div_addr == NULL)
- return -EINVAL;
-
field_val = omap2_divisor_to_clksel(clk, new_div);
if (field_val == ~0)
return -EINVAL;
- reg_val = __raw_readl(div_addr);
- reg_val &= ~field_mask;
- reg_val |= (field_val << __ffs(field_mask));
- __raw_writel(reg_val, div_addr);
- wmb();
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
clk->rate = clk->parent->rate / new_div;
- if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
- OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
- wmb();
- }
+ _omap2xxx_clk_commit(clk);
return 0;
}
@@ -680,31 +753,24 @@
return -EINVAL;
/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
- if (clk->set_rate != NULL)
+ if (clk->set_rate)
ret = clk->set_rate(clk, rate);
- if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
- propagate_rate(clk);
-
return ret;
}
/*
* Converts encoded control register address into a full address
- * On error, *src_addr will be returned as 0.
+ * On error, the return value (parent_div) will be 0.
*/
-static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
- struct clk *src_clk, u32 *field_mask,
- struct clk *clk, u32 *parent_div)
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+ u32 *field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
- *parent_div = 0;
- *src_addr = NULL;
-
clks = omap2_get_clksel_by_parent(clk, src_clk);
- if (clks == NULL)
+ if (!clks)
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
@@ -722,47 +788,35 @@
/* Should never happen. Add a clksel mask to the struct clk. */
WARN_ON(clk->clksel_mask == 0);
- *field_mask = clk->clksel_mask;
- *src_addr = clk->clksel_reg;
- *parent_div = clkr->div;
+ *field_val = clkr->val;
- return clkr->val;
+ return clkr->div;
}
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
{
- void __iomem *src_addr;
- u32 field_val, field_mask, reg_val, parent_div;
+ u32 field_val, v, parent_div;
- if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+ if (clk->flags & CONFIG_PARTICIPANT)
return -EINVAL;
if (!clk->clksel)
return -EINVAL;
- field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
- &field_mask, clk, &parent_div);
- if (src_addr == NULL)
+ parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+ if (!parent_div)
return -EINVAL;
- if (clk->usecount > 0)
- omap2_clk_disable(clk);
-
/* Set new source value (previous dividers if any in effect) */
- reg_val = __raw_readl(src_addr) & ~field_mask;
- reg_val |= (field_val << __ffs(field_mask));
- __raw_writel(reg_val, src_addr);
- wmb();
+ v = __raw_readl(clk->clksel_reg);
+ v &= ~clk->clksel_mask;
+ v |= field_val << __ffs(clk->clksel_mask);
+ __raw_writel(v, clk->clksel_reg);
+ v = __raw_readl(clk->clksel_reg); /* OCP barrier */
- if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
- wmb();
- }
+ _omap2xxx_clk_commit(clk);
- clk->parent = new_parent;
-
- if (clk->usecount > 0)
- omap2_clk_enable(clk);
+ clk_reparent(clk, new_parent);
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = new_parent->rate;
@@ -773,9 +827,6 @@
pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
clk->name, clk->parent->name, clk->rate);
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
-
return 0;
}
@@ -805,7 +856,8 @@
return 0;
}
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, unsigned int m, unsigned int n)
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
{
unsigned long long num;
@@ -838,7 +890,7 @@
unsigned long target_rate,
unsigned long parent_rate)
{
- int flags = 0, carry = 0;
+ int r = 0, carry = 0;
/* Unscale m and round if necessary */
if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
@@ -859,13 +911,13 @@
if (*m < DPLL_MIN_MULTIPLIER) {
*m = DPLL_MIN_MULTIPLIER;
*new_rate = 0;
- flags = DPLL_MULT_UNDERFLOW;
+ r = DPLL_MULT_UNDERFLOW;
}
if (*new_rate == 0)
*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- return flags;
+ return r;
}
/**
@@ -889,54 +941,65 @@
int m, n, r, e, scaled_max_m;
unsigned long scaled_rt_rp, new_rate;
int min_e = -1, min_e_m = -1, min_e_n = -1;
+ struct dpll_data *dd;
if (!clk || !clk->dpll_data)
return ~0;
+ dd = clk->dpll_data;
+
pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
"%ld\n", clk->name, target_rate);
- scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
- scaled_max_m = clk->dpll_data->max_multiplier * DPLL_SCALE_FACTOR;
+ scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
- clk->dpll_data->last_rounded_rate = 0;
+ dd->last_rounded_rate = 0;
- for (n = clk->dpll_data->max_divider; n >= DPLL_MIN_DIVIDER; n--) {
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
/* Compute the scaled DPLL multiplier, based on the divider */
m = scaled_rt_rp * n;
/*
- * Since we're counting n down, a m overflow means we can
- * can immediately skip to the next n
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
*/
if (m > scaled_max_m)
- continue;
+ break;
r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- clk->parent->rate);
+ dd->clk_ref->rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
e = target_rate - new_rate;
pr_debug("clock: n = %d: m = %d: rate error is %d "
"(new_rate = %ld)\n", n, m, e, new_rate);
if (min_e == -1 ||
- min_e >= (int)(abs(e) - clk->dpll_data->rate_tolerance)) {
+ min_e >= (int)(abs(e) - dd->rate_tolerance)) {
min_e = e;
min_e_m = m;
min_e_n = n;
pr_debug("clock: found new least error %d\n", min_e);
- }
- /*
- * Since we're counting n down, a m underflow means we
- * can bail out completely (since as n decreases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (r & DPLL_MULT_UNDERFLOW)
- break;
+ /* We found good settings -- bail out now */
+ if (min_e <= dd->rate_tolerance)
+ break;
+ }
}
if (min_e < 0) {
@@ -944,17 +1007,17 @@
return ~0;
}
- clk->dpll_data->last_rounded_m = min_e_m;
- clk->dpll_data->last_rounded_n = min_e_n;
- clk->dpll_data->last_rounded_rate =
- _dpll_compute_new_rate(clk->parent->rate, min_e_m, min_e_n);
+ dd->last_rounded_m = min_e_m;
+ dd->last_rounded_n = min_e_n;
+ dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+ min_e_m, min_e_n);
pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
min_e, min_e_m, min_e_n);
pr_debug("clock: final rate: %ld (target rate: %ld)\n",
- clk->dpll_data->last_rounded_rate, target_rate);
+ dd->last_rounded_rate, target_rate);
- return clk->dpll_data->last_rounded_rate;
+ return dd->last_rounded_rate;
}
/*-------------------------------------------------------------------------
@@ -973,6 +1036,10 @@
return;
printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
- _omap2_clk_disable(clk);
+ if (cpu_is_omap34xx()) {
+ omap2_clk_enable(clk);
+ omap2_clk_disable(clk);
+ } else
+ _omap2_clk_disable(clk);
}
#endif
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1fb330e..2679ddf 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,13 +21,28 @@
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
+#define CORE_CLK_SRC_32K 0x0
+#define CORE_CLK_SRC_DPLL 0x1
+#define CORE_CLK_SRC_DPLL_X2 0x2
+
+/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP2XXX_EN_DPLL_LPBYPASS 0x1
+#define OMAP2XXX_EN_DPLL_FRBYPASS 0x2
+#define OMAP2XXX_EN_DPLL_LOCKED 0x3
+
+/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP3XXX_EN_DPLL_LPBYPASS 0x5
+#define OMAP3XXX_EN_DPLL_FRBYPASS 0x6
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-int omap2_dpll_rate_tolerance_set(struct clk *clk, unsigned int tolerance);
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
#ifdef CONFIG_OMAP_RESET_CLOCKS
@@ -36,7 +51,7 @@
#define omap2_clk_disable_unused NULL
#endif
-void omap2_clksel_recalc(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
void omap2_init_clk_clkdm(struct clk *clk);
void omap2_init_clksel_parent(struct clk *clk);
u32 omap2_clksel_get_divisor(struct clk *clk);
@@ -44,13 +59,16 @@
u32 *new_div);
u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-void omap2_fixed_divisor_recalc(struct clk *clk);
+unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
void omap2_clk_prepare_for_reboot(void);
+extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_omap2_dflt;
+
extern u8 cpu_mask;
/* clksel_rate data common to 24xx/343x */
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index d382eb0..1e839c5 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -31,15 +31,192 @@
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
+#include <asm/clkdev.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "clock.h"
-#include "clock24xx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
+static const struct clkops clkops_oscck;
+static const struct clkops clkops_fixed;
+
+#include "clock24xx.h"
+
+struct omap_clk {
+ u32 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+#define CK_243X (1 << 0)
+#define CK_242X (1 << 1)
+
+static struct omap_clk omap24xx_clks[] = {
+ /* external root sources */
+ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
+ CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
+ /* internal analog sources */
+ CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X),
+ CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X),
+ CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X),
+ /* internal prcm root sources */
+ CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X),
+ CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X),
+ CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X),
+ CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X),
+ CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X),
+ CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X),
+ CLK(NULL, "emul_ck", &emul_ck, CK_242X),
+ /* mpu domain clocks */
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X),
+ /* dsp domain clocks */
+ CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X),
+ CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+ CLK(NULL, "dsp_ick", &dsp_ick, CK_242X),
+ CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X),
+ CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X),
+ CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+ /* GFX domain clocks */
+ CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X),
+ CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X),
+ CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X),
+ /* Modem domain clocks */
+ CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
+ CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
+ /* DSS domain clocks */
+ CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
+ CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+ CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+ CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
+ /* L3 domain clocks */
+ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X),
+ /* L4 domain clocks */
+ CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X),
+ /* virtual meta-group clock */
+ CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+ /* general l4 interface ck, multi-parent functional clk */
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
+ CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X),
+ CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X),
+ CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X),
+ CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X),
+ CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X),
+ CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X),
+ CLK(NULL, "icr_ick", &icr_ick, CK_243X),
+ CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X),
+ CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X),
+ CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X),
+ CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X),
+ CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
+ CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X),
+ CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X),
+ CLK(NULL, "eac_ick", &eac_ick, CK_242X),
+ CLK(NULL, "eac_fck", &eac_fck, CK_242X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X),
+ CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
+ CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
+ CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X),
+ CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X),
+ CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X),
+ CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X),
+ CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
+ CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X),
+ CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X),
+ CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X),
+ CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X),
+ CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
+ CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
+ CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
+ CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
+ CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
+ CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
+ CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+};
+
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#define EN_APLL_STOPPED 0
#define EN_APLL_LOCKED 3
@@ -59,19 +236,32 @@
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate. CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual). This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
{
- long long dpll_clk;
- u8 amult;
+ long long core_clk;
+ u32 v;
- dpll_clk = omap2_get_dpll_rate(tclk);
+ core_clk = omap2_get_dpll_rate(clk);
- amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
- amult &= OMAP24XX_CORE_CLK_SRC_MASK;
- dpll_clk *= amult;
+ v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+ v &= OMAP24XX_CORE_CLK_SRC_MASK;
- return dpll_clk;
+ if (v == CORE_CLK_SRC_32K)
+ core_clk = 32768;
+ else
+ core_clk *= v;
+
+ return core_clk;
}
static int omap2_enable_osc_ck(struct clk *clk)
@@ -96,6 +286,11 @@
OMAP24XX_PRCM_CLKSRC_CTRL);
}
+static const struct clkops clkops_oscck = {
+ .enable = &omap2_enable_osc_ck,
+ .disable = &omap2_disable_osc_ck,
+};
+
#ifdef OLD_CK
/* Recalculate SYST_CLK */
static void omap2_sys_clk_recalc(struct clk * clk)
@@ -149,11 +344,16 @@
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
}
+static const struct clkops clkops_fixed = {
+ .enable = &omap2_clk_fixed_enable,
+ .disable = &omap2_clk_fixed_disable,
+};
+
/*
* Uses the current prcm set to tell if a rate is valid.
* You can go slower, but not faster within a given rate set.
*/
-long omap2_dpllcore_round_rate(unsigned long target_rate)
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
@@ -182,11 +382,9 @@
}
-static void omap2_dpllcore_recalc(struct clk *clk)
+static unsigned long omap2_dpllcore_recalc(struct clk *clk)
{
- clk->rate = omap2_get_dpll_rate_24xx(clk);
-
- propagate_rate(clk);
+ return omap2xxx_clk_get_core_rate(clk);
}
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -195,22 +393,19 @@
u32 bypass = 0;
struct prcm_config tmpset;
const struct dpll_data *dd;
- unsigned long flags;
- int ret = -EINVAL;
- local_irq_save(flags);
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
if ((rate == (cur_rate / 2)) && (mult == 2)) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (rate != cur_rate) {
valid_rate = omap2_dpllcore_round_rate(rate);
if (valid_rate != rate)
- goto dpll_exit;
+ return -EINVAL;
if (mult == 1)
low = curr_prcm_set->dpll_speed;
@@ -219,7 +414,7 @@
dd = clk->dpll_data;
if (!dd)
- goto dpll_exit;
+ return -EINVAL;
tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
@@ -245,22 +440,19 @@
if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
bypass = 1;
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+ /* For omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
/* Force dll lock mode */
omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
bypass);
/* Errata: ret dll entry state */
- omap2_init_memory_params(omap2_dll_force_needed());
- omap2_reprogram_sdrc(done_rate, 0);
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
}
- omap2_dpllcore_recalc(&dpll_ck);
- ret = 0;
-dpll_exit:
- local_irq_restore(flags);
- return(ret);
+ return 0;
}
/**
@@ -269,9 +461,9 @@
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
-static void omap2_table_mpu_recalc(struct clk *clk)
+static unsigned long omap2_table_mpu_recalc(struct clk *clk)
{
- clk->rate = curr_prcm_set->mpu_speed;
+ return curr_prcm_set->mpu_speed;
}
/*
@@ -337,12 +529,12 @@
}
curr_prcm_set = prcm;
- cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
if (prcm->dpll_speed == cur_rate / 2) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
} else if (prcm->dpll_speed == cur_rate * 2) {
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
} else if (prcm->dpll_speed != cur_rate) {
local_irq_save(flags);
@@ -366,27 +558,67 @@
/* Major subsystem dividers */
tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
- cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+ cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+ CM_CLKSEL1);
+
if (cpu_is_omap2430())
cm_write_mod_reg(prcm->cm_clksel_mdm,
OMAP2430_MDM_MOD, CM_CLKSEL);
- /* x2 to enter init_mem */
- omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+ /* x2 to enter omap2xxx_sdrc_init_params() */
+ omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
bypass);
- omap2_init_memory_params(omap2_dll_force_needed());
- omap2_reprogram_sdrc(done_rate, 0);
+ omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+ omap2xxx_sdrc_reprogram(done_rate, 0);
local_irq_restore(flags);
}
- omap2_dpllcore_recalc(&dpll_ck);
return 0;
}
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ */
+static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+ struct prcm_config *prcm;
+ int i = 0;
+
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck.rate)
+ continue;
+
+ /* don't put bypass rates in table */
+ if (prcm->dpll_speed == prcm->xtal_speed)
+ continue;
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = prcm->mpu_speed / 1000;
+ i++;
+ }
+
+ if (i == 0) {
+ printk(KERN_WARNING "%s: failed to initialize frequency "
+ "table\n", __func__);
+ return;
+ }
+
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ *table = &freq_table[0];
+}
+#endif
+
static struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
@@ -394,24 +626,27 @@
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
+#ifdef CONFIG_CPU_FREQ
+ .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
+#endif
};
static u32 omap2_get_apll_clkin(void)
{
- u32 aplls, sclk = 0;
+ u32 aplls, srate = 0;
aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
aplls &= OMAP24XX_APLLS_CLKIN_MASK;
aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
if (aplls == APLLS_CLKIN_19_2MHZ)
- sclk = 19200000;
+ srate = 19200000;
else if (aplls == APLLS_CLKIN_13MHZ)
- sclk = 13000000;
+ srate = 13000000;
else if (aplls == APLLS_CLKIN_12MHZ)
- sclk = 12000000;
+ srate = 12000000;
- return sclk;
+ return srate;
}
static u32 omap2_get_sysclkdiv(void)
@@ -425,16 +660,14 @@
return div;
}
-static void omap2_osc_clk_recalc(struct clk *clk)
+static unsigned long omap2_osc_clk_recalc(struct clk *clk)
{
- clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
- propagate_rate(clk);
+ return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
}
-static void omap2_sys_clk_recalc(struct clk *clk)
+static unsigned long omap2_sys_clk_recalc(struct clk *clk)
{
- clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
- propagate_rate(clk);
+ return clk->parent->rate / omap2_get_sysclkdiv();
}
/*
@@ -460,7 +693,7 @@
if (!mpurate)
return -EINVAL;
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+ if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
recalculate_root_clocks();
@@ -477,8 +710,8 @@
int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
- struct clk **clkp;
- u32 clkrate;
+ struct omap_clk *c;
+ u32 clkrate, cpu_mask;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
@@ -487,26 +720,28 @@
clk_init(&omap2_clk_functions);
- omap2_osc_clk_recalc(&osc_ck);
- omap2_sys_clk_recalc(&sys_ck);
+ osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+ propagate_rate(&osc_ck);
+ sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+ propagate_rate(&sys_ck);
- for (clkp = onchip_24xx_clks;
- clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
- clkp++) {
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
- if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
- clk_register(*clkp);
- continue;
+ cpu_mask = 0;
+ if (cpu_is_omap2420())
+ cpu_mask |= CK_242X;
+ if (cpu_is_omap2430())
+ cpu_mask |= CK_243X;
+
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ if (c->cpu & cpu_mask) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
}
- if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
- clk_register(*clkp);
- continue;
- }
- }
-
/* Check the MPU rate set by bootloader */
- clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+ clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index ad6d98d..33c3e5b 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,17 +24,13 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-static void omap2_table_mpu_recalc(struct clk *clk);
+static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_osc_clk_recalc(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk *clk);
-static void omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_clk_fixed_enable(struct clk *clk);
-static void omap2_clk_fixed_disable(struct clk *clk);
-static int omap2_enable_osc_ck(struct clk *clk);
-static void omap2_disable_osc_ck(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_osc_clk_recalc(struct clk *clk);
+static unsigned long omap2_sys_clk_recalc(struct clk *clk);
+static unsigned long omap2_dpllcore_recalc(struct clk *clk);
static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
@@ -623,41 +619,35 @@
/* Base external input clocks */
static struct clk func_32k_ck = {
.name = "func_32k_ck",
+ .ops = &clkops_null,
.rate = 32000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
- .recalc = &propagate_rate,
};
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES,
+ .ops = &clkops_oscck,
.clkdm_name = "wkup_clkdm",
- .enable = &omap2_enable_osc_ck,
- .disable = &omap2_disable_osc_ck,
.recalc = &omap2_osc_clk_recalc,
};
/* Without modem likely 12MHz, with modem likely 13MHz */
static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
.name = "sys_ck", /* ~ ref_clk also */
+ .ops = &clkops_null,
.parent = &osc_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_sys_clk_recalc,
};
static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
.name = "alt_ck",
+ .ops = &clkops_null,
.rate = 54000000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ .flags = RATE_FIXED,
.clkdm_name = "wkup_clkdm",
- .recalc = &propagate_rate,
};
/*
@@ -673,7 +663,12 @@
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP24XX_DPLL_MULT_MASK,
.div1_mask = OMAP24XX_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+ .enable_mask = OMAP24XX_EN_DPLL_MASK,
.max_multiplier = 1024,
+ .min_divider = 1,
.max_divider = 16,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
@@ -684,10 +679,9 @@
*/
static struct clk dpll_ck = {
.name = "dpll_ck",
+ .ops = &clkops_null,
.parent = &sys_ck, /* Can be func_32k also */
.dpll_data = &dpll_dd,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
.set_rate = &omap2_reprogram_dpllcore,
@@ -695,30 +689,24 @@
static struct clk apll96_ck = {
.name = "apll96_ck",
+ .ops = &clkops_fixed,
.parent = &sys_ck,
.rate = 96000000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+ .flags = RATE_FIXED | ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
- .enable = &omap2_clk_fixed_enable,
- .disable = &omap2_clk_fixed_disable,
- .recalc = &propagate_rate,
};
static struct clk apll54_ck = {
.name = "apll54_ck",
+ .ops = &clkops_fixed,
.parent = &sys_ck,
.rate = 54000000,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+ .flags = RATE_FIXED | ENABLE_ON_INIT,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
- .enable = &omap2_clk_fixed_enable,
- .disable = &omap2_clk_fixed_disable,
- .recalc = &propagate_rate,
};
/*
@@ -745,9 +733,8 @@
static struct clk func_54m_ck = {
.name = "func_54m_ck",
+ .ops = &clkops_null,
.parent = &apll54_ck, /* can also be alt_clk */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -758,9 +745,8 @@
static struct clk core_ck = {
.name = "core_ck",
+ .ops = &clkops_null,
.parent = &dpll_ck, /* can also be 32k */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -785,9 +771,8 @@
/* The parent of this clock is not selectable on 2420. */
static struct clk func_96m_ck = {
.name = "func_96m_ck",
+ .ops = &clkops_null,
.parent = &apll96_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -818,9 +803,8 @@
static struct clk func_48m_ck = {
.name = "func_48m_ck",
+ .ops = &clkops_null,
.parent = &apll96_ck, /* 96M or Alt */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
@@ -833,10 +817,9 @@
static struct clk func_12m_ck = {
.name = "func_12m_ck",
+ .ops = &clkops_null,
.parent = &func_48m_ck,
.fixed_div = 4,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_fixed_divisor_recalc,
};
@@ -844,8 +827,8 @@
/* Secure timer, only available in secure mode */
static struct clk wdt1_osc_ck = {
.name = "ck_wdt1_osc",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &osc_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.recalc = &followparent_recalc,
};
@@ -887,9 +870,8 @@
static struct clk sys_clkout_src = {
.name = "sys_clkout_src",
+ .ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP24XX_CLKOUT_EN_SHIFT,
@@ -918,9 +900,8 @@
static struct clk sys_clkout = {
.name = "sys_clkout",
+ .ops = &clkops_null,
.parent = &sys_clkout_src,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP24XX_CLKOUT_DIV_MASK,
@@ -933,8 +914,8 @@
/* In 2430, new in 2420 ES2 */
static struct clk sys_clkout2_src = {
.name = "sys_clkout2_src",
+ .ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X | RATE_PROPAGATES,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.enable_bit = OMAP2420_CLKOUT2_EN_SHIFT,
@@ -955,8 +936,8 @@
/* In 2430, new in 2420 ES2 */
static struct clk sys_clkout2 = {
.name = "sys_clkout2",
+ .ops = &clkops_null,
.parent = &sys_clkout2_src,
- .flags = CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
.clkdm_name = "wkup_clkdm",
.clksel_reg = OMAP24XX_PRCM_CLKOUT_CTRL,
.clksel_mask = OMAP2420_CLKOUT2_DIV_MASK,
@@ -968,8 +949,8 @@
static struct clk emul_ck = {
.name = "emul_ck",
+ .ops = &clkops_omap2_dflt,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP24XX_PRCM_CLKEMUL_CTRL,
.enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
@@ -1003,10 +984,9 @@
static struct clk mpu_ck = { /* Control cpu */
.name = "mpu_ck",
+ .ops = &clkops_null,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP |
- CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mpu_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
@@ -1046,9 +1026,9 @@
static struct clk dsp_fck = {
.name = "dsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
- CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "dsp_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -1076,9 +1056,9 @@
/* This clock does not exist as such in the TRM. */
static struct clk dsp_irate_ick = {
.name = "dsp_irate_ick",
+ .ops = &clkops_null,
.parent = &dsp_fck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
- CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
.clksel = dsp_irate_ick_clksel,
@@ -1090,8 +1070,9 @@
/* 2420 only */
static struct clk dsp_ick = {
.name = "dsp_ick", /* apparently ipi and isp */
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
.enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
};
@@ -1099,8 +1080,9 @@
/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
static struct clk iva2_1_ick = {
.name = "iva2_1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
};
@@ -1112,9 +1094,9 @@
*/
static struct clk iva1_ifck = {
.name = "iva1_ifck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
- RATE_PROPAGATES | DELAYED_APP,
+ .flags = CONFIG_PARTICIPANT | DELAYED_APP,
.clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
@@ -1129,8 +1111,8 @@
/* IVA1 mpu/int/i/f clocks are /2 of parent */
static struct clk iva1_mpu_int_ifck = {
.name = "iva1_mpu_int_ifck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &iva1_ifck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
@@ -1175,10 +1157,9 @@
static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
.name = "core_l3_ck",
+ .ops = &clkops_null,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP |
- CONFIG_PARTICIPANT | RATE_PROPAGATES,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l3_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
@@ -1204,9 +1185,9 @@
/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
static struct clk usb_l4_ick = { /* FS-USB interface clock */
.name = "usb_l4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
@@ -1238,9 +1219,9 @@
static struct clk l4_ck = { /* used both as an ick and fck */
.name = "l4_ck",
+ .ops = &clkops_null,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l4_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L4_MASK,
@@ -1276,9 +1257,9 @@
static struct clk ssi_ssr_sst_fck = {
.name = "ssi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_SSI_SHIFT,
@@ -1290,6 +1271,20 @@
.set_rate = &omap2_clksel_set_rate
};
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+ .name = "ssi_l4_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l4_ck,
+ .clkdm_name = "core_l4_clkdm",
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+ .enable_bit = OMAP24XX_EN_SSI_SHIFT,
+ .recalc = &followparent_recalc,
+};
+
/*
* GFX clock domain
@@ -1312,8 +1307,8 @@
static struct clk gfx_3d_fck = {
.name = "gfx_3d_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_3D_SHIFT,
@@ -1327,8 +1322,8 @@
static struct clk gfx_2d_fck = {
.name = "gfx_2d_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_2D_SHIFT,
@@ -1342,8 +1337,8 @@
static struct clk gfx_ick = {
.name = "gfx_ick", /* From l3 */
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
@@ -1372,8 +1367,9 @@
static struct clk mdm_ick = { /* used both as a ick and fck */
.name = "mdm_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP | CONFIG_PARTICIPANT,
.clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
@@ -1387,8 +1383,8 @@
static struct clk mdm_osc_ck = {
.name = "mdm_osc_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &osc_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
.enable_bit = OMAP2430_EN_OSC_SHIFT,
@@ -1432,8 +1428,8 @@
static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
.name = "dss_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ck, /* really both l3 and l4 */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
@@ -1442,9 +1438,9 @@
static struct clk dss1_fck = {
.name = "dss1_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &core_ck, /* Core or sys */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS1_SHIFT,
@@ -1475,9 +1471,9 @@
static struct clk dss2_fck = { /* Alt clk used in power management */
.name = "dss2_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_DSS2_SHIFT,
@@ -1490,8 +1486,8 @@
static struct clk dss_54m_fck = { /* Alt clk used in power management */
.name = "dss_54m_fck", /* 54m tv clk */
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_54m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "dss_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_TV_SHIFT,
@@ -1518,8 +1514,8 @@
static struct clk gpt1_ick = {
.name = "gpt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
@@ -1528,8 +1524,8 @@
static struct clk gpt1_fck = {
.name = "gpt1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_GPT1_SHIFT,
@@ -1544,8 +1540,8 @@
static struct clk gpt2_ick = {
.name = "gpt2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
@@ -1554,8 +1550,8 @@
static struct clk gpt2_fck = {
.name = "gpt2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT2_SHIFT,
@@ -1568,8 +1564,8 @@
static struct clk gpt3_ick = {
.name = "gpt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
@@ -1578,8 +1574,8 @@
static struct clk gpt3_fck = {
.name = "gpt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT3_SHIFT,
@@ -1592,8 +1588,8 @@
static struct clk gpt4_ick = {
.name = "gpt4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
@@ -1602,8 +1598,8 @@
static struct clk gpt4_fck = {
.name = "gpt4_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT4_SHIFT,
@@ -1616,8 +1612,8 @@
static struct clk gpt5_ick = {
.name = "gpt5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
@@ -1626,8 +1622,8 @@
static struct clk gpt5_fck = {
.name = "gpt5_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT5_SHIFT,
@@ -1640,8 +1636,8 @@
static struct clk gpt6_ick = {
.name = "gpt6_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
@@ -1650,8 +1646,8 @@
static struct clk gpt6_fck = {
.name = "gpt6_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT6_SHIFT,
@@ -1664,8 +1660,8 @@
static struct clk gpt7_ick = {
.name = "gpt7_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
.recalc = &followparent_recalc,
@@ -1673,8 +1669,8 @@
static struct clk gpt7_fck = {
.name = "gpt7_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT7_SHIFT,
@@ -1687,8 +1683,8 @@
static struct clk gpt8_ick = {
.name = "gpt8_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
@@ -1697,8 +1693,8 @@
static struct clk gpt8_fck = {
.name = "gpt8_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT8_SHIFT,
@@ -1711,8 +1707,8 @@
static struct clk gpt9_ick = {
.name = "gpt9_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
@@ -1721,8 +1717,8 @@
static struct clk gpt9_fck = {
.name = "gpt9_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT9_SHIFT,
@@ -1735,8 +1731,8 @@
static struct clk gpt10_ick = {
.name = "gpt10_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
@@ -1745,8 +1741,8 @@
static struct clk gpt10_fck = {
.name = "gpt10_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT10_SHIFT,
@@ -1759,8 +1755,8 @@
static struct clk gpt11_ick = {
.name = "gpt11_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
@@ -1769,8 +1765,8 @@
static struct clk gpt11_fck = {
.name = "gpt11_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT11_SHIFT,
@@ -1783,8 +1779,8 @@
static struct clk gpt12_ick = {
.name = "gpt12_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
@@ -1793,8 +1789,8 @@
static struct clk gpt12_fck = {
.name = "gpt12_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
@@ -1807,9 +1803,9 @@
static struct clk mcbsp1_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
@@ -1818,9 +1814,9 @@
static struct clk mcbsp1_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
@@ -1829,9 +1825,9 @@
static struct clk mcbsp2_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
@@ -1840,9 +1836,9 @@
static struct clk mcbsp2_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
@@ -1851,9 +1847,9 @@
static struct clk mcbsp3_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
@@ -1862,9 +1858,9 @@
static struct clk mcbsp3_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
@@ -1873,9 +1869,9 @@
static struct clk mcbsp4_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
@@ -1884,9 +1880,9 @@
static struct clk mcbsp4_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
@@ -1895,9 +1891,9 @@
static struct clk mcbsp5_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
@@ -1906,9 +1902,9 @@
static struct clk mcbsp5_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
@@ -1917,10 +1913,10 @@
static struct clk mcspi1_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
.clkdm_name = "core_l4_clkdm",
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
.recalc = &followparent_recalc,
@@ -1928,9 +1924,9 @@
static struct clk mcspi1_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
@@ -1939,9 +1935,9 @@
static struct clk mcspi2_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
@@ -1950,9 +1946,9 @@
static struct clk mcspi2_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
@@ -1961,9 +1957,9 @@
static struct clk mcspi3_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
@@ -1972,9 +1968,9 @@
static struct clk mcspi3_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
@@ -1983,8 +1979,8 @@
static struct clk uart1_ick = {
.name = "uart1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
@@ -1993,8 +1989,8 @@
static struct clk uart1_fck = {
.name = "uart1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_UART1_SHIFT,
@@ -2003,8 +1999,8 @@
static struct clk uart2_ick = {
.name = "uart2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
@@ -2013,8 +2009,8 @@
static struct clk uart2_fck = {
.name = "uart2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_UART2_SHIFT,
@@ -2023,8 +2019,8 @@
static struct clk uart3_ick = {
.name = "uart3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
@@ -2033,8 +2029,8 @@
static struct clk uart3_fck = {
.name = "uart3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_UART3_SHIFT,
@@ -2043,8 +2039,8 @@
static struct clk gpios_ick = {
.name = "gpios_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
@@ -2053,8 +2049,8 @@
static struct clk gpios_fck = {
.name = "gpios_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
@@ -2063,8 +2059,8 @@
static struct clk mpu_wdt_ick = {
.name = "mpu_wdt_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
@@ -2073,8 +2069,8 @@
static struct clk mpu_wdt_fck = {
.name = "mpu_wdt_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "wkup_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
@@ -2083,9 +2079,9 @@
static struct clk sync_32k_ick = {
.name = "sync_32k_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
@@ -2094,8 +2090,8 @@
static struct clk wdt1_ick = {
.name = "wdt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_WDT1_SHIFT,
@@ -2104,9 +2100,9 @@
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
@@ -2115,8 +2111,8 @@
static struct clk icr_ick = {
.name = "icr_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_EN_ICR_SHIFT,
@@ -2125,8 +2121,8 @@
static struct clk cam_ick = {
.name = "cam_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
@@ -2140,8 +2136,8 @@
*/
static struct clk cam_fck = {
.name = "cam_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_CAM_SHIFT,
@@ -2150,8 +2146,8 @@
static struct clk mailboxes_ick = {
.name = "mailboxes_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
@@ -2160,8 +2156,8 @@
static struct clk wdt4_ick = {
.name = "wdt4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
@@ -2170,8 +2166,8 @@
static struct clk wdt4_fck = {
.name = "wdt4_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_WDT4_SHIFT,
@@ -2180,8 +2176,8 @@
static struct clk wdt3_ick = {
.name = "wdt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
@@ -2190,8 +2186,8 @@
static struct clk wdt3_fck = {
.name = "wdt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_WDT3_SHIFT,
@@ -2200,8 +2196,8 @@
static struct clk mspro_ick = {
.name = "mspro_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
@@ -2210,8 +2206,8 @@
static struct clk mspro_fck = {
.name = "mspro_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
@@ -2220,8 +2216,8 @@
static struct clk mmc_ick = {
.name = "mmc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_MMC_SHIFT,
@@ -2230,8 +2226,8 @@
static struct clk mmc_fck = {
.name = "mmc_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_MMC_SHIFT,
@@ -2240,8 +2236,8 @@
static struct clk fac_ick = {
.name = "fac_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
@@ -2250,8 +2246,8 @@
static struct clk fac_fck = {
.name = "fac_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_FAC_SHIFT,
@@ -2260,8 +2256,8 @@
static struct clk eac_ick = {
.name = "eac_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_EAC_SHIFT,
@@ -2270,8 +2266,8 @@
static struct clk eac_fck = {
.name = "eac_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_EAC_SHIFT,
@@ -2280,8 +2276,8 @@
static struct clk hdq_ick = {
.name = "hdq_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
@@ -2290,8 +2286,8 @@
static struct clk hdq_fck = {
.name = "hdq_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_HDQ_SHIFT,
@@ -2300,9 +2296,9 @@
static struct clk i2c2_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
@@ -2311,9 +2307,9 @@
static struct clk i2c2_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_I2C2_SHIFT,
@@ -2322,9 +2318,9 @@
static struct clk i2chs2_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
@@ -2333,9 +2329,9 @@
static struct clk i2c1_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
@@ -2344,9 +2340,9 @@
static struct clk i2c1_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_12m_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_I2C1_SHIFT,
@@ -2355,9 +2351,9 @@
static struct clk i2chs1_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
@@ -2366,33 +2362,33 @@
static struct clk gpmc_fck = {
.name = "gpmc_fck",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sdma_fck = {
.name = "sdma_fck",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sdma_ick = {
.name = "sdma_ick",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk vlynq_ick = {
.name = "vlynq_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP242X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
@@ -2426,8 +2422,9 @@
static struct clk vlynq_fck = {
.name = "vlynq_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP242X | DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
@@ -2442,8 +2439,9 @@
static struct clk sdrc_ick = {
.name = "sdrc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP2430_EN_SDRC_SHIFT,
@@ -2452,8 +2450,8 @@
static struct clk des_ick = {
.name = "des_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_DES_SHIFT,
@@ -2462,8 +2460,8 @@
static struct clk sha_ick = {
.name = "sha_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_SHA_SHIFT,
@@ -2472,8 +2470,8 @@
static struct clk rng_ick = {
.name = "rng_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_RNG_SHIFT,
@@ -2482,8 +2480,8 @@
static struct clk aes_ick = {
.name = "aes_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_AES_SHIFT,
@@ -2492,8 +2490,8 @@
static struct clk pka_ick = {
.name = "pka_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
.enable_bit = OMAP24XX_EN_PKA_SHIFT,
@@ -2502,8 +2500,8 @@
static struct clk usb_fck = {
.name = "usb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_48m_ck,
- .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
@@ -2512,8 +2510,8 @@
static struct clk usbhs_ick = {
.name = "usbhs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_USBHS_SHIFT,
@@ -2522,8 +2520,8 @@
static struct clk mmchs1_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
@@ -2532,8 +2530,8 @@
static struct clk mmchs1_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l3_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
@@ -2542,9 +2540,9 @@
static struct clk mmchs2_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
@@ -2553,9 +2551,9 @@
static struct clk mmchs2_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_96m_ck,
- .flags = CLOCK_IN_OMAP243X,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
.recalc = &followparent_recalc,
@@ -2563,8 +2561,8 @@
static struct clk gpio5_ick = {
.name = "gpio5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
@@ -2573,8 +2571,8 @@
static struct clk gpio5_fck = {
.name = "gpio5_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_GPIO5_SHIFT,
@@ -2583,8 +2581,8 @@
static struct clk mdm_intc_ick = {
.name = "mdm_intc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
@@ -2593,8 +2591,8 @@
static struct clk mmchsdb1_fck = {
.name = "mmchsdb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
@@ -2603,9 +2601,9 @@
static struct clk mmchsdb2_fck = {
.name = "mmchsdb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &func_32k_ck,
- .flags = CLOCK_IN_OMAP243X,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
.enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
@@ -2628,166 +2626,13 @@
*/
static struct clk virt_prcm_set = {
.name = "virt_prcm_set",
- .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+ .ops = &clkops_null,
+ .flags = DELAYED_APP,
.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
.recalc = &omap2_table_mpu_recalc, /* sets are keyed on mpu rate */
.set_rate = &omap2_select_table_rate,
.round_rate = &omap2_round_to_table_rate,
};
-static struct clk *onchip_24xx_clks[] __initdata = {
- /* external root sources */
- &func_32k_ck,
- &osc_ck,
- &sys_ck,
- &alt_ck,
- /* internal analog sources */
- &dpll_ck,
- &apll96_ck,
- &apll54_ck,
- /* internal prcm root sources */
- &func_54m_ck,
- &core_ck,
- &func_96m_ck,
- &func_48m_ck,
- &func_12m_ck,
- &wdt1_osc_ck,
- &sys_clkout_src,
- &sys_clkout,
- &sys_clkout2_src,
- &sys_clkout2,
- &emul_ck,
- /* mpu domain clocks */
- &mpu_ck,
- /* dsp domain clocks */
- &dsp_fck,
- &dsp_irate_ick,
- &dsp_ick, /* 242x */
- &iva2_1_ick, /* 243x */
- &iva1_ifck, /* 242x */
- &iva1_mpu_int_ifck, /* 242x */
- /* GFX domain clocks */
- &gfx_3d_fck,
- &gfx_2d_fck,
- &gfx_ick,
- /* Modem domain clocks */
- &mdm_ick,
- &mdm_osc_ck,
- /* DSS domain clocks */
- &dss_ick,
- &dss1_fck,
- &dss2_fck,
- &dss_54m_fck,
- /* L3 domain clocks */
- &core_l3_ck,
- &ssi_ssr_sst_fck,
- &usb_l4_ick,
- /* L4 domain clocks */
- &l4_ck, /* used as both core_l4 and wu_l4 */
- /* virtual meta-group clock */
- &virt_prcm_set,
- /* general l4 interface ck, multi-parent functional clk */
- &gpt1_ick,
- &gpt1_fck,
- &gpt2_ick,
- &gpt2_fck,
- &gpt3_ick,
- &gpt3_fck,
- &gpt4_ick,
- &gpt4_fck,
- &gpt5_ick,
- &gpt5_fck,
- &gpt6_ick,
- &gpt6_fck,
- &gpt7_ick,
- &gpt7_fck,
- &gpt8_ick,
- &gpt8_fck,
- &gpt9_ick,
- &gpt9_fck,
- &gpt10_ick,
- &gpt10_fck,
- &gpt11_ick,
- &gpt11_fck,
- &gpt12_ick,
- &gpt12_fck,
- &mcbsp1_ick,
- &mcbsp1_fck,
- &mcbsp2_ick,
- &mcbsp2_fck,
- &mcbsp3_ick,
- &mcbsp3_fck,
- &mcbsp4_ick,
- &mcbsp4_fck,
- &mcbsp5_ick,
- &mcbsp5_fck,
- &mcspi1_ick,
- &mcspi1_fck,
- &mcspi2_ick,
- &mcspi2_fck,
- &mcspi3_ick,
- &mcspi3_fck,
- &uart1_ick,
- &uart1_fck,
- &uart2_ick,
- &uart2_fck,
- &uart3_ick,
- &uart3_fck,
- &gpios_ick,
- &gpios_fck,
- &mpu_wdt_ick,
- &mpu_wdt_fck,
- &sync_32k_ick,
- &wdt1_ick,
- &omapctrl_ick,
- &icr_ick,
- &cam_fck,
- &cam_ick,
- &mailboxes_ick,
- &wdt4_ick,
- &wdt4_fck,
- &wdt3_ick,
- &wdt3_fck,
- &mspro_ick,
- &mspro_fck,
- &mmc_ick,
- &mmc_fck,
- &fac_ick,
- &fac_fck,
- &eac_ick,
- &eac_fck,
- &hdq_ick,
- &hdq_fck,
- &i2c1_ick,
- &i2c1_fck,
- &i2chs1_fck,
- &i2c2_ick,
- &i2c2_fck,
- &i2chs2_fck,
- &gpmc_fck,
- &sdma_fck,
- &sdma_ick,
- &vlynq_ick,
- &vlynq_fck,
- &sdrc_ick,
- &des_ick,
- &sha_ick,
- &rng_ick,
- &aes_ick,
- &pka_ick,
- &usb_fck,
- &usbhs_ick,
- &mmchs1_ick,
- &mmchs1_fck,
- &mmchs2_ick,
- &mmchs2_fck,
- &gpio5_ick,
- &gpio5_fck,
- &mdm_intc_ick,
- &mmchsdb1_fck,
- &mmchsdb2_fck,
-};
-
#endif
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 31bb701..0a14dca 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -30,15 +30,251 @@
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
+#include <asm/clkdev.h>
-#include "memory.h"
+#include <mach/sdrc.h>
#include "clock.h"
-#include "clock34xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
+static const struct clkops clkops_noncore_dpll_ops;
+
+#include "clock34xx.h"
+
+struct omap_clk {
+ u32 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+#define CK_343X (1 << 0)
+#define CK_3430ES1 (1 << 1)
+#define CK_3430ES2 (1 << 2)
+
+static struct omap_clk omap34xx_clks[] = {
+ CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X),
+ CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X),
+ CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X),
+ CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+ CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+ CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X),
+ CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+ CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X),
+ CLK(NULL, "sys_ck", &sys_ck, CK_343X),
+ CLK(NULL, "sys_altclk", &sys_altclk, CK_343X),
+ CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X),
+ CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X),
+ CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X),
+ CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X),
+ CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+ CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X),
+ CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X),
+ CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X),
+ CLK(NULL, "core_ck", &core_ck, CK_343X),
+ CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X),
+ CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X),
+ CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+ CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X),
+ CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+ CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+ CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X),
+ CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X),
+ CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+ CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X),
+ CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X),
+ CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X),
+ CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X),
+ CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X),
+ CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X),
+ CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X),
+ CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X),
+ CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X),
+ CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+ CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X),
+ CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+ CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+ CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2),
+ CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2),
+ CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X),
+ CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X),
+ CLK(NULL, "corex2_fck", &corex2_fck, CK_343X),
+ CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X),
+ CLK(NULL, "mpu_ck", &mpu_ck, CK_343X),
+ CLK(NULL, "arm_fck", &arm_fck, CK_343X),
+ CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+ CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X),
+ CLK(NULL, "iva2_ck", &iva2_ck, CK_343X),
+ CLK(NULL, "l3_ick", &l3_ick, CK_343X),
+ CLK(NULL, "l4_ick", &l4_ick, CK_343X),
+ CLK(NULL, "rm_ick", &rm_ick, CK_343X),
+ CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1),
+ CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1),
+ CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1),
+ CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1),
+ CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1),
+ CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
+ CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
+ CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
+ CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
+ CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
+ CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
+ CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2),
+ CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2),
+ CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X),
+ CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2),
+ CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X),
+ CLK(NULL, "mspro_fck", &mspro_fck, CK_343X),
+ CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X),
+ CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X),
+ CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X),
+ CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X),
+ CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X),
+ CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X),
+ CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X),
+ CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X),
+ CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X),
+ CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X),
+ CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X),
+ CLK(NULL, "uart2_fck", &uart2_fck, CK_343X),
+ CLK(NULL, "uart1_fck", &uart1_fck, CK_343X),
+ CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+ CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X),
+ CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X),
+ CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
+ CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
+ CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
+ CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
+ CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
+ CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
+ CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
+ CLK(NULL, "pka_ick", &pka_ick, CK_343X),
+ CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X),
+ CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2),
+ CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2),
+ CLK(NULL, "icr_ick", &icr_ick, CK_343X),
+ CLK(NULL, "aes2_ick", &aes2_ick, CK_343X),
+ CLK(NULL, "sha12_ick", &sha12_ick, CK_343X),
+ CLK(NULL, "des2_ick", &des2_ick, CK_343X),
+ CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X),
+ CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X),
+ CLK(NULL, "mspro_ick", &mspro_ick, CK_343X),
+ CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X),
+ CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X),
+ CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X),
+ CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X),
+ CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X),
+ CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X),
+ CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X),
+ CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X),
+ CLK(NULL, "uart2_ick", &uart2_ick, CK_343X),
+ CLK(NULL, "uart1_ick", &uart1_ick, CK_343X),
+ CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X),
+ CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X),
+ CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X),
+ CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X),
+ CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1),
+ CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X),
+ CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X),
+ CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X),
+ CLK(NULL, "ssi_ick", &ssi_ick, CK_343X),
+ CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1),
+ CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X),
+ CLK(NULL, "aes1_ick", &aes1_ick, CK_343X),
+ CLK("omap_rng", "ick", &rng_ick, CK_343X),
+ CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
+ CLK(NULL, "des1_ick", &des1_ick, CK_343X),
+ CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
+ CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
+ CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
+ CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
+ CLK(NULL, "dss_ick", &dss_ick, CK_343X),
+ CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
+ CLK(NULL, "cam_ick", &cam_ick, CK_343X),
+ CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
+ CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+ CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+ CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2),
+ CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2),
+ CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X),
+ CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X),
+ CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X),
+ CLK("omap_wdt", "fck", &wdt2_fck, CK_343X),
+ CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X),
+ CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2),
+ CLK("omap_wdt", "ick", &wdt2_ick, CK_343X),
+ CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X),
+ CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X),
+ CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+ CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X),
+ CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X),
+ CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X),
+ CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X),
+ CLK(NULL, "uart3_fck", &uart3_fck, CK_343X),
+ CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X),
+ CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X),
+ CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X),
+ CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X),
+ CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X),
+ CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X),
+ CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X),
+ CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X),
+ CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+ CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X),
+ CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X),
+ CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X),
+ CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X),
+ CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X),
+ CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X),
+ CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X),
+ CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X),
+ CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X),
+ CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X),
+ CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X),
+ CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X),
+ CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X),
+ CLK(NULL, "uart3_ick", &uart3_ick, CK_343X),
+ CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X),
+ CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X),
+ CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X),
+ CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X),
+ CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X),
+ CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X),
+ CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X),
+ CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X),
+ CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X),
+ CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X),
+ CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X),
+ CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X),
+ CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X),
+ CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X),
+ CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X),
+ CLK(NULL, "pclk_fck", &pclk_fck, CK_343X),
+ CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X),
+ CLK(NULL, "atclk_fck", &atclk_fck, CK_343X),
+ CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X),
+ CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X),
+ CLK(NULL, "sr1_fck", &sr1_fck, CK_343X),
+ CLK(NULL, "sr2_fck", &sr2_fck, CK_343X),
+ CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X),
+ CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X),
+ CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X),
+ CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X),
+};
+
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
@@ -51,11 +287,9 @@
*
* Recalculate and propagate the DPLL rate.
*/
-static void omap3_dpll_recalc(struct clk *clk)
+static unsigned long omap3_dpll_recalc(struct clk *clk)
{
- clk->rate = omap2_get_dpll_rate(clk);
-
- propagate_rate(clk);
+ return omap2_get_dpll_rate(clk);
}
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
@@ -78,14 +312,12 @@
const struct dpll_data *dd;
int i = 0;
int ret = -EINVAL;
- u32 idlest_mask;
dd = clk->dpll_data;
- state <<= dd->idlest_bit;
- idlest_mask = 1 << dd->idlest_bit;
+ state <<= __ffs(dd->idlest_mask);
- while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
+ while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
i < MAX_DPLL_WAIT_TRIES) {
i++;
udelay(1);
@@ -104,6 +336,42 @@
return ret;
}
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = clk->dpll_data->clk_ref->rate / (n + 1);
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
/*
@@ -128,25 +396,20 @@
ai = omap3_dpll_autoidle_read(clk);
+ omap3_dpll_deny_idle(clk);
+
_omap3_dpll_write_clken(clk, DPLL_LOCKED);
- if (ai) {
- /*
- * If no downstream clocks are enabled, CM_IDLEST bit
- * may never become active, so don't wait for DPLL to lock.
- */
- r = 0;
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
omap3_dpll_allow_idle(clk);
- } else {
- r = _omap3_wait_dpll_status(clk, 1);
- omap3_dpll_deny_idle(clk);
- };
return r;
}
/*
- * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
* @clk: pointer to a DPLL struct clk
*
* Instructs a non-CORE DPLL to enter low-power bypass mode. In
@@ -236,14 +499,25 @@
static int omap3_noncore_dpll_enable(struct clk *clk)
{
int r;
+ struct dpll_data *dd;
if (clk == &dpll3_ck)
return -EINVAL;
- if (clk->parent->rate == clk_get_rate(clk))
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->rate == dd->clk_bypass->rate) {
+ WARN_ON(clk->parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
- else
+ } else {
+ WARN_ON(clk->parent != dd->clk_ref);
r = _omap3_noncore_dpll_lock(clk);
+ }
+ /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
+ if (!r)
+ clk->rate = omap2_get_dpll_rate(clk);
return r;
}
@@ -270,6 +544,215 @@
_omap3_noncore_dpll_stop(clk);
}
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /* Set jitter correction */
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ __raw_writel(v, dd->control_reg);
+
+ /* Set DPLL multiplier, divider */
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= m << __ffs(dd->mult_mask);
+ v |= (n - 1) << __ffs(dd->div1_mask);
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate. If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass. Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *new_parent = NULL;
+ u16 freqsel;
+ struct dpll_data *dd;
+ int ret;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (rate == omap2_get_dpll_rate(clk))
+ return 0;
+
+ /*
+ * Ensure both the bypass and ref clocks are enabled prior to
+ * doing anything; we need the bypass clock running to reprogram
+ * the DPLL.
+ */
+ omap2_clk_enable(dd->clk_bypass);
+ omap2_clk_enable(dd->clk_ref);
+
+ if (dd->clk_bypass->rate == rate &&
+ (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+ ret = _omap3_noncore_dpll_bypass(clk);
+ if (!ret)
+ new_parent = dd->clk_bypass;
+ } else {
+ if (dd->last_rounded_rate != rate)
+ omap2_dpll_round_rate(clk, rate);
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+
+ pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+ clk->name, rate);
+
+ ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+ dd->last_rounded_n, freqsel);
+ if (!ret)
+ new_parent = dd->clk_ref;
+ }
+ if (!ret) {
+ /*
+ * Switch the parent clock in the heirarchy, and make sure
+ * that the new parent's usecount is correct. Note: we
+ * enable the new parent before disabling the old to avoid
+ * any unnecessary hardware disable->enable transitions.
+ */
+ if (clk->usecount) {
+ omap2_clk_enable(new_parent);
+ omap2_clk_disable(clk->parent);
+ }
+ clk_reparent(clk, new_parent);
+ clk->rate = rate;
+ }
+ omap2_clk_disable(dd->clk_ref);
+ omap2_clk_disable(dd->clk_bypass);
+
+ return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+
+/*
+ * CORE DPLL (DPLL3) rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate. Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 new_div = 0;
+ unsigned long validrate, sdrcrate;
+ struct omap_sdrc_params *sp;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ if (clk != &dpll3_m2_ck)
+ return -EINVAL;
+
+ if (rate == clk->rate)
+ return 0;
+
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
+ return -EINVAL;
+
+ sdrcrate = sdrc_ick.rate;
+ if (rate > clk->rate)
+ sdrcrate <<= ((rate / clk->rate) - 1);
+ else
+ sdrcrate >>= ((clk->rate / rate) - 1);
+
+ sp = omap2_sdrc_get_params(sdrcrate);
+ if (!sp)
+ return -EINVAL;
+
+ pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
+ sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+
+ /* REVISIT: SRAM code doesn't support other M2 divisors yet */
+ WARN_ON(new_div != 1 && new_div != 2);
+
+ /* REVISIT: Add SDRC_MR changing to this code also */
+ omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
+ sp->actim_ctrlb, new_div);
+
+ return 0;
+}
+
+
+static const struct clkops clkops_noncore_dpll_ops = {
+ .enable = &omap3_noncore_dpll_enable,
+ .disable = &omap3_noncore_dpll_disable,
+};
+
+/* DPLL autoidle read/set code */
+
+
/**
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
* @clk: struct clk * of the DPLL to read
@@ -356,9 +839,10 @@
* Using parent clock DPLL data, look up DPLL state. If locked, set our
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
*/
-static void omap3_clkoutx2_recalc(struct clk *clk)
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
{
const struct dpll_data *dd;
+ unsigned long rate;
u32 v;
struct clk *pclk;
@@ -372,17 +856,15 @@
dd = pclk->dpll_data;
- WARN_ON(!dd->control_reg || !dd->enable_mask);
+ WARN_ON(!dd->enable_mask);
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
- if (v != DPLL_LOCKED)
- clk->rate = clk->parent->rate;
+ if (v != OMAP3XXX_EN_DPLL_LOCKED)
+ rate = clk->parent->rate;
else
- clk->rate = clk->parent->rate * 2;
-
- if (clk->flags & RATE_PROPAGATES)
- propagate_rate(clk);
+ rate = clk->parent->rate * 2;
+ return rate;
}
/* Common clock code */
@@ -432,7 +914,7 @@
/* REVISIT: not yet ready for 343x */
#if 0
- if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+ if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
#endif
@@ -450,26 +932,13 @@
int __init omap2_clk_init(void)
{
/* struct prcm_config *prcm; */
- struct clk **clkp;
+ struct omap_clk *c;
/* u32 clkrate; */
u32 cpu_clkflg;
- /* REVISIT: Ultimately this will be used for multiboot */
-#if 0
- if (cpu_is_omap242x()) {
- cpu_mask = RATE_IN_242X;
- cpu_clkflg = CLOCK_IN_OMAP242X;
- clkp = onchip_24xx_clks;
- } else if (cpu_is_omap2430()) {
- cpu_mask = RATE_IN_243X;
- cpu_clkflg = CLOCK_IN_OMAP243X;
- clkp = onchip_24xx_clks;
- }
-#endif
if (cpu_is_omap34xx()) {
cpu_mask = RATE_IN_343X;
- cpu_clkflg = CLOCK_IN_OMAP343X;
- clkp = onchip_34xx_clks;
+ cpu_clkflg = CK_343X;
/*
* Update this if there are further clock changes between ES2
@@ -477,23 +946,24 @@
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
- cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+ cpu_clkflg |= CK_3430ES1;
} else {
cpu_mask |= RATE_IN_3430ES2;
- cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+ cpu_clkflg |= CK_3430ES2;
}
}
clk_init(&omap2_clk_functions);
- for (clkp = onchip_34xx_clks;
- clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
- clkp++) {
- if ((*clkp)->flags & cpu_clkflg) {
- clk_register(*clkp);
- omap2_init_clk_clkdm(*clkp);
+ for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
+ for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+ if (c->cpu & cpu_clkflg) {
+ clkdev_add(&c->lk);
+ clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
}
- }
/* REVISIT: Not yet ready for OMAP3 */
#if 0
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index a826094..70ec10d 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,13 +27,14 @@
#include "prm.h"
#include "prm-regbits-34xx.h"
-static void omap3_dpll_recalc(struct clk *clk);
-static void omap3_clkoutx2_recalc(struct clk *clk);
+static unsigned long omap3_dpll_recalc(struct clk *clk);
+static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
static void omap3_dpll_deny_idle(struct clk *clk);
static u32 omap3_dpll_autoidle_read(struct clk *clk);
-static int omap3_noncore_dpll_enable(struct clk *clk);
-static void omap3_noncore_dpll_disable(struct clk *clk);
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
@@ -47,6 +48,10 @@
* DPLL5 supplies other peripheral clocks (USBHOST, USIM).
*/
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
#define DPLL_LOW_POWER_STOP 0x1
#define DPLL_LOW_POWER_BYPASS 0x5
@@ -57,67 +62,59 @@
/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
static struct clk omap_32k_fck = {
.name = "omap_32k_fck",
+ .ops = &clkops_null,
.rate = 32768,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk secure_32k_fck = {
.name = "secure_32k_fck",
+ .ops = &clkops_null,
.rate = 32768,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
/* Virtual source clocks for osc_sys_ck */
static struct clk virt_12m_ck = {
.name = "virt_12m_ck",
+ .ops = &clkops_null,
.rate = 12000000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_13m_ck = {
.name = "virt_13m_ck",
+ .ops = &clkops_null,
.rate = 13000000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_16_8m_ck = {
.name = "virt_16_8m_ck",
+ .ops = &clkops_null,
.rate = 16800000,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_19_2m_ck = {
.name = "virt_19_2m_ck",
+ .ops = &clkops_null,
.rate = 19200000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_26m_ck = {
.name = "virt_26m_ck",
+ .ops = &clkops_null,
.rate = 26000000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static struct clk virt_38_4m_ck = {
.name = "virt_38_4m_ck",
+ .ops = &clkops_null,
.rate = 38400000,
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .flags = RATE_FIXED,
};
static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -164,13 +161,13 @@
/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
static struct clk osc_sys_ck = {
.name = "osc_sys_ck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP3430_PRM_CLKSEL,
.clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK,
.clksel = osc_sys_clksel,
/* REVISIT: deal with autoextclkmode? */
- .flags = CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
- ALWAYS_ENABLED,
+ .flags = RATE_FIXED,
.recalc = &omap2_clksel_recalc,
};
@@ -189,36 +186,34 @@
/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
static struct clk sys_ck = {
.name = "sys_ck",
+ .ops = &clkops_null,
.parent = &osc_sys_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP3430_PRM_CLKSRC_CTRL,
.clksel_mask = OMAP_SYSCLKDIV_MASK,
.clksel = sys_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.recalc = &omap2_clksel_recalc,
};
static struct clk sys_altclk = {
.name = "sys_altclk",
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .ops = &clkops_null,
};
/* Optional external clock input for some McBSPs */
static struct clk mcbsp_clks = {
.name = "mcbsp_clks",
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
- .recalc = &propagate_rate,
+ .ops = &clkops_null,
};
/* PRM EXTERNAL CLOCK OUTPUT */
static struct clk sys_clkout1 = {
.name = "sys_clkout1",
+ .ops = &clkops_omap2_dflt,
.parent = &osc_sys_ck,
.enable_reg = OMAP3430_PRM_CLKOUT_CTRL,
.enable_bit = OMAP3430_CLKOUT_EN_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -226,16 +221,6 @@
/* CM CLOCKS */
-static const struct clksel_rate dpll_bypass_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
-static const struct clksel_rate dpll_locked_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
- { .div = 0 }
-};
-
static const struct clksel_rate div16_dpll_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 2, .val = 2, .flags = RATE_IN_343X },
@@ -263,6 +248,9 @@
.mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_MPU_DPLL_MULT_MASK,
.div1_mask = OMAP3430_MPU_DPLL_DIV_MASK,
+ .clk_bypass = &dpll1_fck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_MPU_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
@@ -272,18 +260,21 @@
.autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
.autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
- .idlest_bit = OMAP3430_ST_MPU_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_MPU_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll1_ck = {
.name = "dpll1_ck",
+ .ops = &clkops_null,
.parent = &sys_ck,
.dpll_data = &dpll1_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap3_dpll_recalc,
};
@@ -293,9 +284,9 @@
*/
static struct clk dpll1_x2_ck = {
.name = "dpll1_x2_ck",
+ .ops = &clkops_null,
.parent = &dpll1_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
@@ -311,13 +302,13 @@
*/
static struct clk dpll1_x2m2_ck = {
.name = "dpll1_x2m2_ck",
+ .ops = &clkops_null,
.parent = &dpll1_x2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
.clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
.clksel = div16_dpll1_x2m2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll1_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -329,6 +320,9 @@
.mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK,
.div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK,
+ .clk_bypass = &dpll2_fck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_IVA2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
@@ -339,20 +333,21 @@
.autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
.autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
- .idlest_bit = OMAP3430_ST_IVA2_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll2_ck = {
.name = "dpll2_ck",
+ .ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll2_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll2_clkdm",
.recalc = &omap3_dpll_recalc,
};
@@ -367,14 +362,14 @@
*/
static struct clk dpll2_m2_ck = {
.name = "dpll2_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll2_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
OMAP3430_CM_CLKSEL2_PLL),
.clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
.clksel = div16_dpll2_m2x2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll2_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -387,6 +382,9 @@
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP3430_CORE_DPLL_MULT_MASK,
.div1_mask = OMAP3430_CORE_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_CORE_DPLL_MASK,
.auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
@@ -394,17 +392,21 @@
.recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT,
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK,
+ .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+ .idlest_mask = OMAP3430_ST_CORE_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll3_ck = {
.name = "dpll3_ck",
+ .ops = &clkops_null,
.parent = &sys_ck,
.dpll_data = &dpll3_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.round_rate = &omap2_dpll_round_rate,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_dpll_recalc,
};
@@ -414,9 +416,9 @@
*/
static struct clk dpll3_x2_ck = {
.name = "dpll3_x2_ck",
+ .ops = &clkops_null,
.parent = &dpll3_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
@@ -460,55 +462,34 @@
{ .parent = NULL }
};
-/*
- * DPLL3 output M2
- * REVISIT: This DPLL output divider must be changed in SRAM, so until
- * that code is ready, this should remain a 'read-only' clksel clock.
- */
+/* DPLL3 output M2 - primary control point for CORE speed */
static struct clk dpll3_m2_ck = {
.name = "dpll3_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll3_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
.clksel = div31_dpll3m2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll3_clkdm",
+ .round_rate = &omap2_clksel_round_rate,
+ .set_rate = &omap3_core_dpll_m2_set_rate,
.recalc = &omap2_clksel_recalc,
};
-static const struct clksel core_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk core_ck = {
.name = "core_ck",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = core_ck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
-static const struct clksel dpll3_m2x2_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
+ .ops = &clkops_null,
+ .parent = &dpll3_m2_ck,
+ .recalc = &followparent_recalc,
};
static struct clk dpll3_m2x2_ck = {
.name = "dpll3_m2x2_ck",
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = dpll3_m2x2_ck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
+ .ops = &clkops_null,
+ .parent = &dpll3_x2_ck,
+ .clkdm_name = "dpll3_clkdm",
+ .recalc = &followparent_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
@@ -520,42 +501,34 @@
/* This virtual clock is the source for dpll3_m3x2_ck */
static struct clk dpll3_m3_ck = {
.name = "dpll3_m3_ck",
+ .ops = &clkops_null,
.parent = &dpll3_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL3_MASK,
.clksel = div16_dpll3_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll3_m3x2_ck = {
.name = "dpll3_m3x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll3_m3_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll3_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel emu_core_alwon_ck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk emu_core_alwon_ck = {
.name = "emu_core_alwon_ck",
+ .ops = &clkops_null,
.parent = &dpll3_m3x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_CORE_CLK_MASK,
- .clksel = emu_core_alwon_ck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
+ .clkdm_name = "dpll3_clkdm",
+ .recalc = &followparent_recalc,
};
/* DPLL4 */
@@ -565,6 +538,9 @@
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -574,20 +550,21 @@
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .idlest_bit = OMAP3430_ST_PERIPH_CLK_SHIFT,
+ .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll4_ck = {
.name = "dpll4_ck",
+ .ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll4_dd,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_dpll4_set_rate,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_dpll_recalc,
};
@@ -598,9 +575,9 @@
*/
static struct clk dpll4_x2_ck = {
.name = "dpll4_x2_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
@@ -612,112 +589,101 @@
/* This virtual clock is the source for dpll4_m2x2_ck */
static struct clk dpll4_m2_ck = {
.name = "dpll4_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
.clksel_mask = OMAP3430_DIV_96M_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m2x2_ck = {
.name = "dpll4_m2x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m2_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_96M_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
static struct clk omap_96m_alwon_fck = {
.name = "omap_96m_alwon_fck",
+ .ops = &clkops_null,
.parent = &dpll4_m2x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = omap_96m_alwon_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
-static struct clk omap_96m_fck = {
- .name = "omap_96m_fck",
- .parent = &omap_96m_alwon_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
-static const struct clksel cm_96m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk cm_96m_fck = {
.name = "cm_96m_fck",
- .parent = &dpll4_m2x2_ck,
+ .ops = &clkops_null,
+ .parent = &omap_96m_alwon_fck,
+ .recalc = &followparent_recalc,
+};
+
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+ { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 0 }
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+ { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+ { .parent = &sys_ck, .rates = omap_96m_sys_rates },
+ { .parent = NULL }
+};
+
+static struct clk omap_96m_fck = {
+ .name = "omap_96m_fck",
+ .ops = &clkops_null,
+ .parent = &sys_ck,
.init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = cm_96m_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+ .clksel_mask = OMAP3430_SOURCE_96M_MASK,
+ .clksel = omap_96m_fck_clksel,
.recalc = &omap2_clksel_recalc,
};
/* This virtual clock is the source for dpll4_m3x2_ck */
static struct clk dpll4_m3_ck = {
.name = "dpll4_m3_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_TV_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m3x2_ck = {
.name = "dpll4_m3x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m3_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_TV_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
-static const struct clksel virt_omap_54m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
-static struct clk virt_omap_54m_fck = {
- .name = "virt_omap_54m_fck",
- .parent = &dpll4_m3x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = virt_omap_54m_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 }
@@ -729,23 +695,22 @@
};
static const struct clksel omap_54m_clksel[] = {
- { .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+ { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
{ .parent = &sys_altclk, .rates = omap_54m_alt_rates },
{ .parent = NULL }
};
static struct clk omap_54m_fck = {
.name = "omap_54m_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP3430_SOURCE_54M,
+ .clksel_mask = OMAP3430_SOURCE_54M_MASK,
.clksel = omap_54m_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
-static const struct clksel_rate omap_48m_96md2_rates[] = {
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
{ .div = 0 }
};
@@ -756,106 +721,112 @@
};
static const struct clksel omap_48m_clksel[] = {
- { .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+ { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
{ .parent = NULL }
};
static struct clk omap_48m_fck = {
.name = "omap_48m_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP3430_SOURCE_48M,
+ .clksel_mask = OMAP3430_SOURCE_48M_MASK,
.clksel = omap_48m_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
static struct clk omap_12m_fck = {
.name = "omap_12m_fck",
+ .ops = &clkops_null,
.parent = &omap_48m_fck,
.fixed_div = 4,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_fixed_divisor_recalc,
};
/* This virstual clock is the source for dpll4_m4x2_ck */
static struct clk dpll4_m4_ck = {
.name = "dpll4_m4_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_DSS1_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
+ .set_rate = &omap2_clksel_set_rate,
+ .round_rate = &omap2_clksel_round_rate,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m4x2_ck = {
.name = "dpll4_m4x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
/* This virtual clock is the source for dpll4_m5x2_ck */
static struct clk dpll4_m5_ck = {
.name = "dpll4_m5_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_CAM_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m5x2_ck = {
.name = "dpll4_m5x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m5_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
/* This virtual clock is the source for dpll4_m6x2_ck */
static struct clk dpll4_m6_ck = {
.name = "dpll4_m6_ck",
+ .ops = &clkops_null,
.parent = &dpll4_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_DIV_DPLL4_MASK,
.clksel = div16_dpll4_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap2_clksel_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
static struct clk dpll4_m6x2_ck = {
.name = "dpll4_m6x2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m6_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+ .flags = INVERT_ENABLE,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
};
static struct clk emu_per_alwon_ck = {
.name = "emu_per_alwon_ck",
+ .ops = &clkops_null,
.parent = &dpll4_m6x2_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll4_clkdm",
.recalc = &followparent_recalc,
};
@@ -867,6 +838,9 @@
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
.mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
.div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+ .clk_bypass = &sys_ck,
+ .clk_ref = &sys_ck,
+ .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
.enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -876,20 +850,21 @@
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
.autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .idlest_bit = OMAP3430ES2_ST_PERIPH2_CLK_SHIFT,
+ .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
.max_multiplier = OMAP3_MAX_DPLL_MULT,
+ .min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct clk dpll5_ck = {
.name = "dpll5_ck",
+ .ops = &clkops_noncore_dpll_ops,
.parent = &sys_ck,
.dpll_data = &dpll5_dd,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
- .enable = &omap3_noncore_dpll_enable,
- .disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
+ .clkdm_name = "dpll5_clkdm",
.recalc = &omap3_dpll_recalc,
};
@@ -900,31 +875,13 @@
static struct clk dpll5_m2_ck = {
.name = "dpll5_m2_ck",
+ .ops = &clkops_null,
.parent = &dpll5_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
- .recalc = &omap2_clksel_recalc,
-};
-
-static const struct clksel omap_120m_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
-static struct clk omap_120m_fck = {
- .name = "omap_120m_fck",
- .parent = &dpll5_m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
- .clksel_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
- .clksel = omap_120m_fck_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clkdm_name = "dpll5_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -951,22 +908,23 @@
};
static const struct clksel clkout2_src_clksel[] = {
- { .parent = &core_ck, .rates = clkout2_src_core_rates },
- { .parent = &sys_ck, .rates = clkout2_src_sys_rates },
- { .parent = &omap_96m_alwon_fck, .rates = clkout2_src_96m_rates },
- { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates },
+ { .parent = &core_ck, .rates = clkout2_src_core_rates },
+ { .parent = &sys_ck, .rates = clkout2_src_sys_rates },
+ { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates },
+ { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates },
{ .parent = NULL }
};
static struct clk clkout2_src_ck = {
.name = "clkout2_src_ck",
+ .ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP3430_CM_CLKOUT_CTRL,
.enable_bit = OMAP3430_CLKOUT2_EN_SHIFT,
.clksel_reg = OMAP3430_CM_CLKOUT_CTRL,
.clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK,
.clksel = clkout2_src_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .clkdm_name = "core_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -986,11 +944,11 @@
static struct clk sys_clkout2 = {
.name = "sys_clkout2",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP3430_CM_CLKOUT_CTRL,
.clksel_mask = OMAP3430_CLKOUT2_DIV_MASK,
.clksel = sys_clkout2_clksel,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
@@ -998,16 +956,22 @@
static struct clk corex2_fck = {
.name = "corex2_fck",
+ .ops = &clkops_null,
.parent = &dpll3_m2x2_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
/* DPLL power domain clock controls */
-static const struct clksel div2_core_clksel[] = {
- { .parent = &core_ck, .rates = div2_rates },
+static const struct clksel_rate div4_rates[] = {
+ { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+ { .div = 2, .val = 2, .flags = RATE_IN_343X },
+ { .div = 4, .val = 4, .flags = RATE_IN_343X },
+ { .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+ { .parent = &core_ck, .rates = div4_rates },
{ .parent = NULL }
};
@@ -1017,39 +981,21 @@
*/
static struct clk dpll1_fck = {
.name = "dpll1_fck",
+ .ops = &clkops_null,
.parent = &core_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.clksel_mask = OMAP3430_MPU_CLK_SRC_MASK,
- .clksel = div2_core_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clksel = div4_core_clksel,
.recalc = &omap2_clksel_recalc,
};
-/*
- * MPU clksel:
- * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll1_fck'
- */
-static const struct clksel mpu_clksel[] = {
- { .parent = &dpll1_fck, .rates = dpll_bypass_rates },
- { .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk mpu_ck = {
.name = "mpu_ck",
+ .ops = &clkops_null,
.parent = &dpll1_x2m2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
- .clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
- .clksel = mpu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "mpu_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
@@ -1066,13 +1012,12 @@
static struct clk arm_fck = {
.name = "arm_fck",
+ .ops = &clkops_null,
.parent = &mpu_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
.clksel = arm_fck_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
@@ -1084,63 +1029,48 @@
*/
static struct clk emu_mpu_alwon_ck = {
.name = "emu_mpu_alwon_ck",
+ .ops = &clkops_null,
.parent = &mpu_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
static struct clk dpll2_fck = {
.name = "dpll2_fck",
+ .ops = &clkops_null,
.parent = &core_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK,
- .clksel = div2_core_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .clksel = div4_core_clksel,
.recalc = &omap2_clksel_recalc,
};
-/*
- * IVA2 clksel:
- * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll2_fck'
- */
-
-static const struct clksel iva2_clksel[] = {
- { .parent = &dpll2_fck, .rates = dpll_bypass_rates },
- { .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk iva2_ck = {
.name = "iva2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
- OMAP3430_CM_IDLEST_PLL),
- .clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
- .clksel = iva2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.clkdm_name = "iva2_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
/* Common interface clocks */
+static const struct clksel div2_core_clksel[] = {
+ { .parent = &core_ck, .rates = div2_rates },
+ { .parent = NULL }
+};
+
static struct clk l3_ick = {
.name = "l3_ick",
+ .ops = &clkops_null,
.parent = &core_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_L3_MASK,
.clksel = div2_core_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l3_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1152,13 +1082,12 @@
static struct clk l4_ick = {
.name = "l4_ick",
+ .ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_L4_MASK,
.clksel = div2_l3_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
@@ -1171,12 +1100,12 @@
static struct clk rm_ick = {
.name = "rm_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_RM_MASK,
.clksel = div2_l4_clksel,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
@@ -1192,53 +1121,52 @@
/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
static struct clk gfx_l3_ck = {
.name = "gfx_l3_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.recalc = &followparent_recalc,
};
static struct clk gfx_l3_fck = {
.name = "gfx_l3_fck",
+ .ops = &clkops_null,
.parent = &gfx_l3_ck,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_l3_clksel,
- .flags = CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gfx_l3_ick = {
.name = "gfx_l3_ick",
+ .ops = &clkops_null,
.parent = &gfx_l3_ck,
- .flags = CLOCK_IN_OMAP3430ES1 | PARENT_CONTROLS_CLOCK,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gfx_cg1_ck = {
.name = "gfx_cg1_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_2D_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gfx_cg2_ck = {
.name = "gfx_cg2_ck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_3D_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "gfx_3430es1_clkdm",
.recalc = &followparent_recalc,
};
@@ -1265,24 +1193,24 @@
static struct clk sgx_fck = {
.name = "sgx_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430ES2_EN_SGX_SHIFT,
+ .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK,
.clksel = sgx_clksel,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "sgx_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk sgx_ick = {
.name = "sgx_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
- .enable_bit = OMAP3430ES2_EN_SGX_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
+ .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
.clkdm_name = "sgx_clkdm",
.recalc = &followparent_recalc,
};
@@ -1291,11 +1219,11 @@
static struct clk d2d_26m_fck = {
.name = "d2d_26m_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_D2D_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "d2d_clkdm",
.recalc = &followparent_recalc,
};
@@ -1308,6 +1236,7 @@
static struct clk gpt10_fck = {
.name = "gpt10_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1315,13 +1244,13 @@
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT10_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt11_fck = {
.name = "gpt11_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1329,35 +1258,34 @@
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT11_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk cpefuse_fck = {
.name = "cpefuse_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &followparent_recalc,
};
static struct clk ts_fck = {
.name = "ts_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &omap_32k_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_TS_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &followparent_recalc,
};
static struct clk usbtll_fck = {
.name = "usbtll_fck",
- .parent = &omap_120m_fck,
+ .ops = &clkops_omap2_dflt,
+ .parent = &dpll5_m2_ck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
.enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &followparent_recalc,
};
@@ -1365,84 +1293,83 @@
static struct clk core_96m_fck = {
.name = "core_96m_fck",
+ .ops = &clkops_null,
.parent = &omap_96m_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs3_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs2_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mspro_fck = {
.name = "mspro_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MSPRO_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs1_fck = {
.name = "mmchs_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MMC1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c3_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c2_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c1_fck = {
.name = "i2c_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_96m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1469,6 +1396,7 @@
static struct clk mcbsp5_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1476,13 +1404,13 @@
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
.clksel_mask = OMAP2_MCBSP5_CLKS_MASK,
.clksel = mcbsp_15_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk mcbsp1_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1490,7 +1418,6 @@
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
.clksel_mask = OMAP2_MCBSP1_CLKS_MASK,
.clksel = mcbsp_15_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -1499,77 +1426,76 @@
static struct clk core_48m_fck = {
.name = "core_48m_fck",
+ .ops = &clkops_null,
.parent = &omap_48m_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi4_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk mcspi3_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk mcspi2_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk mcspi1_fck = {
.name = "mcspi_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk uart2_fck = {
.name = "uart2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk uart1_fck = {
.name = "uart1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk fshostusb_fck = {
.name = "fshostusb_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.recalc = &followparent_recalc,
};
@@ -1577,19 +1503,18 @@
static struct clk core_12m_fck = {
.name = "core_12m_fck",
+ .ops = &clkops_null,
.parent = &omap_12m_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk hdq_fck = {
.name = "hdq_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_12m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_HDQ_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -1612,22 +1537,22 @@
static struct clk ssi_ssr_fck = {
.name = "ssi_ssr_fck",
+ .ops = &clkops_omap2_dflt,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_SSI_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_SSI_MASK,
.clksel = ssi_ssr_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.clkdm_name = "core_l4_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk ssi_sst_fck = {
.name = "ssi_sst_fck",
+ .ops = &clkops_null,
.parent = &ssi_ssr_fck,
.fixed_div = 2,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
.recalc = &omap2_fixed_divisor_recalc,
};
@@ -1641,39 +1566,39 @@
*/
static struct clk core_l3_ick = {
.name = "core_l3_ick",
+ .ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk hsotgusb_ick = {
.name = "hsotgusb_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sdrc_ick = {
.name = "sdrc_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SDRC_SHIFT,
- .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpmc_fck = {
.name = "gpmc_fck",
+ .ops = &clkops_null,
.parent = &core_l3_ick,
- .flags = CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
- ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT, /* huh? */
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@@ -1682,18 +1607,17 @@
static struct clk security_l3_ick = {
.name = "security_l3_ick",
+ .ops = &clkops_null,
.parent = &l3_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
static struct clk pka_ick = {
.name = "pka_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l3_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_PKA_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -1701,31 +1625,30 @@
static struct clk core_l4_ick = {
.name = "core_l4_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbtll_ick = {
.name = "usbtll_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
.enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs3_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES2_EN_MMC3_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -1733,250 +1656,251 @@
/* Intersystem Communication Registers - chassis mode only */
static struct clk icr_ick = {
.name = "icr_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_ICR_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk aes2_ick = {
.name = "aes2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_AES2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk sha12_ick = {
.name = "sha12_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SHA12_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk des2_ick = {
.name = "des2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_DES2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs2_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mmchs1_ick = {
.name = "mmchs_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MMC1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mspro_ick = {
.name = "mspro_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MSPRO_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk hdq_ick = {
.name = "hdq_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_HDQ_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi4_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi3_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi2_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcspi1_ick = {
.name = "mcspi_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCSPI1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c3_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c2_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk i2c1_ick = {
.name = "i2c_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_I2C1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart2_ick = {
.name = "uart2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_UART2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart1_ick = {
.name = "uart1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_UART1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt11_ick = {
.name = "gpt11_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_GPT11_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt10_ick = {
.name = "gpt10_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_GPT10_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp5_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 5,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp1_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 1,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MCBSP1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk fac_ick = {
.name = "fac_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430ES1_EN_FAC_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES1,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mailboxes_ick = {
.name = "mailboxes_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_MAILBOXES_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &core_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT,
- .flags = CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+ .flags = ENABLE_ON_INIT,
.recalc = &followparent_recalc,
};
@@ -1984,19 +1908,18 @@
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk ssi_ick = {
.name = "ssi_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &ssi_l4_ick,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
.enable_bit = OMAP3430_EN_SSI_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -2011,6 +1934,7 @@
static struct clk usb_l4_ick = {
.name = "usb_l4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ick,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -2018,7 +1942,6 @@
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
.clksel = usb_l4_clksel,
- .flags = CLOCK_IN_OMAP3430ES1,
.recalc = &omap2_clksel_recalc,
};
@@ -2028,98 +1951,87 @@
static struct clk security_l4_ick2 = {
.name = "security_l4_ick2",
+ .ops = &clkops_null,
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
static struct clk aes1_ick = {
.name = "aes1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_AES1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk rng_ick = {
.name = "rng_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_RNG_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk sha11_ick = {
.name = "sha11_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_SHA11_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
static struct clk des1_ick = {
.name = "des1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &security_l4_ick2,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP3430_EN_DES1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
/* DSS */
-static const struct clksel dss1_alwon_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk dss1_alwon_fck = {
.name = "dss1_alwon_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m4x2_ck,
- .init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS1_SHIFT,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = dss1_alwon_fck_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &omap_54m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss_96m_fck = {
.name = "dss_96m_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &omap_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
static struct clk dss2_alwon_fck = {
.name = "dss2_alwon_fck",
+ .ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
@@ -2127,45 +2039,46 @@
static struct clk dss_ick = {
/* Handles both L3 and L4 clocks */
.name = "dss_ick",
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "dss_clkdm",
.recalc = &followparent_recalc,
};
/* CAM */
-static const struct clksel cam_mclk_clksel[] = {
- { .parent = &sys_ck, .rates = dpll_bypass_rates },
- { .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
- { .parent = NULL }
-};
-
static struct clk cam_mclk = {
.name = "cam_mclk",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m5x2_ck,
- .init = &omap2_init_clksel_parent,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
- .clksel_mask = OMAP3430_ST_PERIPH_CLK_MASK,
- .clksel = cam_mclk_clksel,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "cam_clkdm",
- .recalc = &omap2_clksel_recalc,
+ .recalc = &followparent_recalc,
};
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
+ .clkdm_name = "cam_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk csi2_96m_fck = {
+ .name = "csi2_96m_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &core_96m_fck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_EN_CSI2_SHIFT,
.clkdm_name = "cam_clkdm",
.recalc = &followparent_recalc,
};
@@ -2174,22 +2087,22 @@
static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
- .parent = &omap_120m_fck,
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
@@ -2197,22 +2110,11 @@
static struct clk usbhost_ick = {
/* Handles both L3 and L4 clocks */
.name = "usbhost_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
- .clkdm_name = "usbhost_clkdm",
- .recalc = &followparent_recalc,
-};
-
-static struct clk usbhost_sar_fck = {
- .name = "usbhost_sar_fck",
- .parent = &osc_sys_ck,
- .init = &omap2_init_clk_clkdm,
- .enable_reg = OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
- .enable_bit = OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "usbhost_clkdm",
.recalc = &followparent_recalc,
};
@@ -2237,7 +2139,7 @@
static const struct clksel usim_clksel[] = {
{ .parent = &omap_96m_fck, .rates = usim_96m_rates },
- { .parent = &omap_120m_fck, .rates = usim_120m_rates },
+ { .parent = &dpll5_m2_ck, .rates = usim_120m_rates },
{ .parent = &sys_ck, .rates = div2_rates },
{ .parent = NULL },
};
@@ -2245,63 +2147,63 @@
/* 3430ES2 only */
static struct clk usim_fck = {
.name = "usim_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK,
.clksel = usim_clksel,
- .flags = CLOCK_IN_OMAP3430ES2,
.recalc = &omap2_clksel_recalc,
};
/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
static struct clk gpt1_fck = {
.name = "gpt1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT1_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT1_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk wkup_32k_fck = {
.name = "wkup_32k_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clk_clkdm,
.parent = &omap_32k_fck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt2_fck = {
.name = "wdt2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_WDT2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wkup_l4_ick = {
.name = "wkup_l4_ick",
+ .ops = &clkops_null,
.parent = &sys_ck,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2310,50 +2212,50 @@
/* Never specifically named in the TRM, so we have to infer a likely name */
static struct clk usim_ick = {
.name = "usim_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT,
- .flags = CLOCK_IN_OMAP3430ES2,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt2_ick = {
.name = "wdt2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt1_ick = {
.name = "wdt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio1_ick = {
.name = "gpio1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk omap_32ksync_ick = {
.name = "omap_32ksync_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_32KSYNC_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2361,20 +2263,20 @@
/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_ick = {
.name = "gpt12_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT12_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt1_ick = {
.name = "gpt1_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &wkup_l4_ick,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT1_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
};
@@ -2385,406 +2287,404 @@
static struct clk per_96m_fck = {
.name = "per_96m_fck",
+ .ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk per_48m_fck = {
.name = "per_48m_fck",
+ .ops = &clkops_null,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart3_fck = {
.name = "uart3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_48m_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_UART3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_fck = {
.name = "gpt2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT2_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT2_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt3_fck = {
.name = "gpt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT3_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT3_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt4_fck = {
.name = "gpt4_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT4_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT4_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt5_fck = {
.name = "gpt5_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT5_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT5_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt6_fck = {
.name = "gpt6_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT6_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT6_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt7_fck = {
.name = "gpt7_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT7_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT7_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt8_fck = {
.name = "gpt8_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT8_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT8_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk gpt9_fck = {
.name = "gpt9_fck",
+ .ops = &clkops_omap2_dflt_wait,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT9_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
.clksel_mask = OMAP3430_CLKSEL_GPT9_MASK,
.clksel = omap343x_gpt_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk per_32k_alwon_fck = {
.name = "per_32k_alwon_fck",
+ .ops = &clkops_null,
.parent = &omap_32k_fck,
.clkdm_name = "per_clkdm",
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
};
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt3_fck = {
.name = "wdt3_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_WDT3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk per_l4_ick = {
.name = "per_l4_ick",
+ .ops = &clkops_null,
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio6_ick = {
.name = "gpio6_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio5_ick = {
.name = "gpio5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio4_ick = {
.name = "gpio4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio3_ick = {
.name = "gpio3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpio2_ick = {
.name = "gpio2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk wdt3_ick = {
.name = "wdt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_WDT3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk uart3_ick = {
.name = "uart3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_UART3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt9_ick = {
.name = "gpt9_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT9_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt8_ick = {
.name = "gpt8_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT8_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt7_ick = {
.name = "gpt7_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT7_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt6_ick = {
.name = "gpt6_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT6_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt5_ick = {
.name = "gpt5_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT5_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt4_ick = {
.name = "gpt4_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt3_ick = {
.name = "gpt3_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_ick = {
.name = "gpt2_ick",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_GPT2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp2_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP2_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp3_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP3_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static struct clk mcbsp4_ick = {
.name = "mcbsp_ick",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.parent = &per_l4_ick,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_MCBSP4_SHIFT,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
static const struct clksel mcbsp_234_clksel[] = {
- { .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
- { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
+ { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+ { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
{ .parent = NULL }
};
static struct clk mcbsp2_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 2,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2792,13 +2692,13 @@
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
.clksel_mask = OMAP2_MCBSP2_CLKS_MASK,
.clksel = mcbsp_234_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk mcbsp3_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 3,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2806,13 +2706,13 @@
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
.clksel_mask = OMAP2_MCBSP3_CLKS_MASK,
.clksel = mcbsp_234_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk mcbsp4_fck = {
.name = "mcbsp_fck",
+ .ops = &clkops_omap2_dflt_wait,
.id = 4,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
@@ -2820,7 +2720,6 @@
.clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
.clksel_mask = OMAP2_MCBSP4_CLKS_MASK,
.clksel = mcbsp_234_clksel,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "per_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2864,11 +2763,11 @@
*/
static struct clk emu_src_ck = {
.name = "emu_src_ck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2888,11 +2787,11 @@
static struct clk pclk_fck = {
.name = "pclk_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_PCLK_MASK,
.clksel = pclk_emu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2911,11 +2810,11 @@
static struct clk pclkx2_fck = {
.name = "pclkx2_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK,
.clksel = pclkx2_emu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2927,22 +2826,22 @@
static struct clk atclk_fck = {
.name = "atclk_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK,
.clksel = atclk_emu_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
static struct clk traceclk_src_fck = {
.name = "traceclk_src_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK,
.clksel = emu_src_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2961,11 +2860,11 @@
static struct clk traceclk_fck = {
.name = "traceclk_fck",
+ .ops = &clkops_null,
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
.clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK,
.clksel = traceclk_clksel,
- .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
.clkdm_name = "emu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@@ -2975,27 +2874,27 @@
/* SmartReflex fclk (VDD1) */
static struct clk sr1_fck = {
.name = "sr1_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR1_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
/* SmartReflex fclk (VDD2) */
static struct clk sr2_fck = {
.name = "sr2_fck",
+ .ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_SR2_SHIFT,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &followparent_recalc,
};
static struct clk sr_l4_ick = {
.name = "sr_l4_ick",
+ .ops = &clkops_null, /* RMK: missing? */
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@@ -3005,231 +2904,16 @@
/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
+ .ops = &clkops_null,
.parent = &secure_32k_fck,
- .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
};
static struct clk wdt1_fck = {
.name = "wdt1_fck",
+ .ops = &clkops_null,
.parent = &secure_32k_fck,
- .flags = CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
};
-static struct clk *onchip_34xx_clks[] __initdata = {
- &omap_32k_fck,
- &virt_12m_ck,
- &virt_13m_ck,
- &virt_16_8m_ck,
- &virt_19_2m_ck,
- &virt_26m_ck,
- &virt_38_4m_ck,
- &osc_sys_ck,
- &sys_ck,
- &sys_altclk,
- &mcbsp_clks,
- &sys_clkout1,
- &dpll1_ck,
- &dpll1_x2_ck,
- &dpll1_x2m2_ck,
- &dpll2_ck,
- &dpll2_m2_ck,
- &dpll3_ck,
- &core_ck,
- &dpll3_x2_ck,
- &dpll3_m2_ck,
- &dpll3_m2x2_ck,
- &dpll3_m3_ck,
- &dpll3_m3x2_ck,
- &emu_core_alwon_ck,
- &dpll4_ck,
- &dpll4_x2_ck,
- &omap_96m_alwon_fck,
- &omap_96m_fck,
- &cm_96m_fck,
- &virt_omap_54m_fck,
- &omap_54m_fck,
- &omap_48m_fck,
- &omap_12m_fck,
- &dpll4_m2_ck,
- &dpll4_m2x2_ck,
- &dpll4_m3_ck,
- &dpll4_m3x2_ck,
- &dpll4_m4_ck,
- &dpll4_m4x2_ck,
- &dpll4_m5_ck,
- &dpll4_m5x2_ck,
- &dpll4_m6_ck,
- &dpll4_m6x2_ck,
- &emu_per_alwon_ck,
- &dpll5_ck,
- &dpll5_m2_ck,
- &omap_120m_fck,
- &clkout2_src_ck,
- &sys_clkout2,
- &corex2_fck,
- &dpll1_fck,
- &mpu_ck,
- &arm_fck,
- &emu_mpu_alwon_ck,
- &dpll2_fck,
- &iva2_ck,
- &l3_ick,
- &l4_ick,
- &rm_ick,
- &gfx_l3_ck,
- &gfx_l3_fck,
- &gfx_l3_ick,
- &gfx_cg1_ck,
- &gfx_cg2_ck,
- &sgx_fck,
- &sgx_ick,
- &d2d_26m_fck,
- &gpt10_fck,
- &gpt11_fck,
- &cpefuse_fck,
- &ts_fck,
- &usbtll_fck,
- &core_96m_fck,
- &mmchs3_fck,
- &mmchs2_fck,
- &mspro_fck,
- &mmchs1_fck,
- &i2c3_fck,
- &i2c2_fck,
- &i2c1_fck,
- &mcbsp5_fck,
- &mcbsp1_fck,
- &core_48m_fck,
- &mcspi4_fck,
- &mcspi3_fck,
- &mcspi2_fck,
- &mcspi1_fck,
- &uart2_fck,
- &uart1_fck,
- &fshostusb_fck,
- &core_12m_fck,
- &hdq_fck,
- &ssi_ssr_fck,
- &ssi_sst_fck,
- &core_l3_ick,
- &hsotgusb_ick,
- &sdrc_ick,
- &gpmc_fck,
- &security_l3_ick,
- &pka_ick,
- &core_l4_ick,
- &usbtll_ick,
- &mmchs3_ick,
- &icr_ick,
- &aes2_ick,
- &sha12_ick,
- &des2_ick,
- &mmchs2_ick,
- &mmchs1_ick,
- &mspro_ick,
- &hdq_ick,
- &mcspi4_ick,
- &mcspi3_ick,
- &mcspi2_ick,
- &mcspi1_ick,
- &i2c3_ick,
- &i2c2_ick,
- &i2c1_ick,
- &uart2_ick,
- &uart1_ick,
- &gpt11_ick,
- &gpt10_ick,
- &mcbsp5_ick,
- &mcbsp1_ick,
- &fac_ick,
- &mailboxes_ick,
- &omapctrl_ick,
- &ssi_l4_ick,
- &ssi_ick,
- &usb_l4_ick,
- &security_l4_ick2,
- &aes1_ick,
- &rng_ick,
- &sha11_ick,
- &des1_ick,
- &dss1_alwon_fck,
- &dss_tv_fck,
- &dss_96m_fck,
- &dss2_alwon_fck,
- &dss_ick,
- &cam_mclk,
- &cam_ick,
- &usbhost_120m_fck,
- &usbhost_48m_fck,
- &usbhost_ick,
- &usbhost_sar_fck,
- &usim_fck,
- &gpt1_fck,
- &wkup_32k_fck,
- &gpio1_dbck,
- &wdt2_fck,
- &wkup_l4_ick,
- &usim_ick,
- &wdt2_ick,
- &wdt1_ick,
- &gpio1_ick,
- &omap_32ksync_ick,
- &gpt12_ick,
- &gpt1_ick,
- &per_96m_fck,
- &per_48m_fck,
- &uart3_fck,
- &gpt2_fck,
- &gpt3_fck,
- &gpt4_fck,
- &gpt5_fck,
- &gpt6_fck,
- &gpt7_fck,
- &gpt8_fck,
- &gpt9_fck,
- &per_32k_alwon_fck,
- &gpio6_dbck,
- &gpio5_dbck,
- &gpio4_dbck,
- &gpio3_dbck,
- &gpio2_dbck,
- &wdt3_fck,
- &per_l4_ick,
- &gpio6_ick,
- &gpio5_ick,
- &gpio4_ick,
- &gpio3_ick,
- &gpio2_ick,
- &wdt3_ick,
- &uart3_ick,
- &gpt9_ick,
- &gpt8_ick,
- &gpt7_ick,
- &gpt6_ick,
- &gpt5_ick,
- &gpt4_ick,
- &gpt3_ick,
- &gpt2_ick,
- &mcbsp2_ick,
- &mcbsp3_ick,
- &mcbsp4_ick,
- &mcbsp2_fck,
- &mcbsp3_fck,
- &mcbsp4_fck,
- &emu_src_ck,
- &pclk_fck,
- &pclkx2_fck,
- &atclk_fck,
- &traceclk_src_fck,
- &traceclk_fck,
- &sr1_fck,
- &sr2_fck,
- &sr_l4_ick,
- &secure_32k_fck,
- &gpt12_fck,
- &wdt1_fck,
-};
-
#endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 4c3ce9c..0e7d501 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/limits.h>
+#include <linux/err.h>
#include <linux/io.h>
@@ -71,16 +72,13 @@
if (!omap_chip_is(autodep->omap_chip))
return;
- pwrdm = pwrdm_lookup(autodep->pwrdm_name);
+ pwrdm = pwrdm_lookup(autodep->pwrdm.name);
if (!pwrdm) {
- pr_debug("clockdomain: _autodep_lookup: powerdomain %s "
- "does not exist\n", autodep->pwrdm_name);
- WARN_ON(1);
- return;
+ pr_err("clockdomain: autodeps: powerdomain %s does not exist\n",
+ autodep->pwrdm.name);
+ pwrdm = ERR_PTR(-ENOENT);
}
- autodep->pwrdm = pwrdm;
-
- return;
+ autodep->pwrdm.ptr = pwrdm;
}
/*
@@ -95,16 +93,19 @@
{
struct clkdm_pwrdm_autodep *autodep;
- for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
- if (!autodep->pwrdm)
+ for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+ if (IS_ERR(autodep->pwrdm.ptr))
+ continue;
+
+ if (!omap_chip_is(autodep->omap_chip))
continue;
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
- "pwrdm %s\n", autodep->pwrdm_name,
- clkdm->pwrdm->name);
+ "pwrdm %s\n", autodep->pwrdm.ptr->name,
+ clkdm->pwrdm.ptr->name);
- pwrdm_add_sleepdep(clkdm->pwrdm, autodep->pwrdm);
- pwrdm_add_wkdep(clkdm->pwrdm, autodep->pwrdm);
+ pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+ pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
}
}
@@ -120,16 +121,19 @@
{
struct clkdm_pwrdm_autodep *autodep;
- for (autodep = autodeps; autodep->pwrdm_name; autodep++) {
- if (!autodep->pwrdm)
+ for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
+ if (IS_ERR(autodep->pwrdm.ptr))
+ continue;
+
+ if (!omap_chip_is(autodep->omap_chip))
continue;
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
- "pwrdm %s\n", autodep->pwrdm_name,
- clkdm->pwrdm->name);
+ "pwrdm %s\n", autodep->pwrdm.ptr->name,
+ clkdm->pwrdm.ptr->name);
- pwrdm_del_sleepdep(clkdm->pwrdm, autodep->pwrdm);
- pwrdm_del_wkdep(clkdm->pwrdm, autodep->pwrdm);
+ pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+ pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
}
}
@@ -179,7 +183,7 @@
autodeps = init_autodeps;
if (autodeps)
- for (autodep = autodeps; autodep->pwrdm_name; autodep++)
+ for (autodep = autodeps; autodep->pwrdm.ptr; autodep++)
_autodep_lookup(autodep);
}
@@ -202,20 +206,20 @@
if (!omap_chip_is(clkdm->omap_chip))
return -EINVAL;
- pwrdm = pwrdm_lookup(clkdm->pwrdm_name);
+ pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
- pr_debug("clockdomain: clkdm_register %s: powerdomain %s "
- "does not exist\n", clkdm->name, clkdm->pwrdm_name);
+ pr_err("clockdomain: %s: powerdomain %s does not exist\n",
+ clkdm->name, clkdm->pwrdm.name);
return -EINVAL;
}
- clkdm->pwrdm = pwrdm;
+ clkdm->pwrdm.ptr = pwrdm;
mutex_lock(&clkdm_mutex);
/* Verify that the clockdomain is not already registered */
if (_clkdm_lookup(clkdm->name)) {
ret = -EEXIST;
goto cr_unlock;
- };
+ }
list_add(&clkdm->node, &clkdm_list);
@@ -242,7 +246,7 @@
if (!clkdm)
return -EINVAL;
- pwrdm_del_clkdm(clkdm->pwrdm, clkdm);
+ pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm);
mutex_lock(&clkdm_mutex);
list_del(&clkdm->node);
@@ -327,7 +331,7 @@
if (!clkdm)
return NULL;
- return clkdm->pwrdm;
+ return clkdm->pwrdm.ptr;
}
@@ -348,7 +352,7 @@
if (!clkdm)
return -EINVAL;
- v = cm_read_mod_reg(clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
v &= clkdm->clktrctrl_mask;
v >>= __ffs(clkdm->clktrctrl_mask);
@@ -380,7 +384,7 @@
if (cpu_is_omap24xx()) {
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
- clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
} else if (cpu_is_omap34xx()) {
@@ -388,7 +392,7 @@
__ffs(clkdm->clktrctrl_mask));
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
- clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
} else {
BUG();
@@ -422,7 +426,7 @@
if (cpu_is_omap24xx()) {
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
- clkdm->pwrdm->prcm_offs, PM_PWSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
} else if (cpu_is_omap34xx()) {
@@ -430,7 +434,7 @@
__ffs(clkdm->clktrctrl_mask));
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
- clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
} else {
BUG();
@@ -478,7 +482,7 @@
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm->prcm_offs,
+ clkdm->pwrdm.ptr->prcm_offs,
CM_CLKSTCTRL);
}
@@ -516,7 +520,7 @@
cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm->prcm_offs, CM_CLKSTCTRL);
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
@@ -567,6 +571,8 @@
else
omap2_clkdm_wakeup(clkdm);
+ pwrdm_wait_transition(clkdm->pwrdm.ptr);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index cd86dcc..281d5da 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -14,12 +14,29 @@
/*
* OMAP2/3-common clockdomains
+ *
+ * Even though the 2420 has a single PRCM module from the
+ * interconnect's perspective, internally it does appear to have
+ * separate PRM and CM clockdomains. The usual test case is
+ * sys_clkout/sys_clkout2.
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
static struct clockdomain wkup_clkdm = {
.name = "wkup_clkdm",
- .pwrdm_name = "wkup_pwrdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain prm_clkdm = {
+ .name = "prm_clkdm",
+ .pwrdm = { .name = "wkup_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain cm_clkdm = {
+ .name = "cm_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
@@ -31,7 +48,7 @@
static struct clockdomain mpu_2420_clkdm = {
.name = "mpu_clkdm",
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -39,7 +56,7 @@
static struct clockdomain iva1_2420_clkdm = {
.name = "iva1_clkdm",
- .pwrdm_name = "dsp_pwrdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -56,7 +73,7 @@
static struct clockdomain mpu_2430_clkdm = {
.name = "mpu_clkdm",
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -64,7 +81,7 @@
static struct clockdomain mdm_clkdm = {
.name = "mdm_clkdm",
- .pwrdm_name = "mdm_pwrdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -81,7 +98,7 @@
static struct clockdomain dsp_clkdm = {
.name = "dsp_clkdm",
- .pwrdm_name = "dsp_pwrdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -89,7 +106,7 @@
static struct clockdomain gfx_24xx_clkdm = {
.name = "gfx_clkdm",
- .pwrdm_name = "gfx_pwrdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -97,7 +114,7 @@
static struct clockdomain core_l3_24xx_clkdm = {
.name = "core_l3_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -105,7 +122,7 @@
static struct clockdomain core_l4_24xx_clkdm = {
.name = "core_l4_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -113,7 +130,7 @@
static struct clockdomain dss_24xx_clkdm = {
.name = "dss_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
@@ -130,7 +147,7 @@
static struct clockdomain mpu_34xx_clkdm = {
.name = "mpu_clkdm",
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -138,7 +155,7 @@
static struct clockdomain neon_clkdm = {
.name = "neon_clkdm",
- .pwrdm_name = "neon_pwrdm",
+ .pwrdm = { .name = "neon_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -146,7 +163,7 @@
static struct clockdomain iva2_clkdm = {
.name = "iva2_clkdm",
- .pwrdm_name = "iva2_pwrdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -154,7 +171,7 @@
static struct clockdomain gfx_3430es1_clkdm = {
.name = "gfx_clkdm",
- .pwrdm_name = "gfx_pwrdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
@@ -162,10 +179,10 @@
static struct clockdomain sgx_clkdm = {
.name = "sgx_clkdm",
- .pwrdm_name = "sgx_pwrdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
/*
@@ -177,7 +194,7 @@
*/
static struct clockdomain d2d_clkdm = {
.name = "d2d_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -185,7 +202,7 @@
static struct clockdomain core_l3_34xx_clkdm = {
.name = "core_l3_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -193,7 +210,7 @@
static struct clockdomain core_l4_34xx_clkdm = {
.name = "core_l4_clkdm",
- .pwrdm_name = "core_pwrdm",
+ .pwrdm = { .name = "core_pwrdm" },
.flags = CLKDM_CAN_HWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -201,7 +218,7 @@
static struct clockdomain dss_34xx_clkdm = {
.name = "dss_clkdm",
- .pwrdm_name = "dss_pwrdm",
+ .pwrdm = { .name = "dss_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -209,7 +226,7 @@
static struct clockdomain cam_clkdm = {
.name = "cam_clkdm",
- .pwrdm_name = "cam_pwrdm",
+ .pwrdm = { .name = "cam_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -217,28 +234,62 @@
static struct clockdomain usbhost_clkdm = {
.name = "usbhost_clkdm",
- .pwrdm_name = "usbhost_pwrdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
};
static struct clockdomain per_clkdm = {
.name = "per_clkdm",
- .pwrdm_name = "per_pwrdm",
+ .pwrdm = { .name = "per_pwrdm" },
.flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
static struct clockdomain emu_clkdm = {
.name = "emu_clkdm",
- .pwrdm_name = "emu_pwrdm",
- .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
#endif /* CONFIG_ARCH_OMAP34XX */
/*
@@ -247,14 +298,16 @@
static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
{
- .pwrdm_name = "mpu_pwrdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
{
- .pwrdm_name = "iva2_pwrdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
},
- { NULL }
+ {
+ .pwrdm = { .name = NULL },
+ }
};
/*
@@ -264,6 +317,8 @@
static struct clockdomain *clockdomains_omap[] = {
&wkup_clkdm,
+ &cm_clkdm,
+ &prm_clkdm,
#ifdef CONFIG_ARCH_OMAP2420
&mpu_2420_clkdm,
@@ -297,6 +352,11 @@
&usbhost_clkdm,
&per_clkdm,
&emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ &dpll5_clkdm,
#endif
NULL,
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 1098ecf..297a2fe 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -110,35 +110,56 @@
#define OMAP24XX_EN_DES (1 << 0)
/* CM_IDLEST1_CORE specific bits */
-#define OMAP24XX_ST_MAILBOXES (1 << 30)
-#define OMAP24XX_ST_WDT4 (1 << 29)
-#define OMAP2420_ST_WDT3 (1 << 28)
-#define OMAP24XX_ST_MSPRO (1 << 27)
-#define OMAP24XX_ST_FAC (1 << 25)
-#define OMAP2420_ST_EAC (1 << 24)
-#define OMAP24XX_ST_HDQ (1 << 23)
-#define OMAP24XX_ST_I2C2 (1 << 20)
-#define OMAP24XX_ST_I2C1 (1 << 19)
-#define OMAP24XX_ST_MCBSP2 (1 << 16)
-#define OMAP24XX_ST_MCBSP1 (1 << 15)
-#define OMAP24XX_ST_DSS (1 << 0)
+#define OMAP24XX_ST_MAILBOXES_SHIFT 30
+#define OMAP24XX_ST_MAILBOXES_MASK (1 << 30)
+#define OMAP24XX_ST_WDT4_SHIFT 29
+#define OMAP24XX_ST_WDT4_MASK (1 << 29)
+#define OMAP2420_ST_WDT3_SHIFT 28
+#define OMAP2420_ST_WDT3_MASK (1 << 28)
+#define OMAP24XX_ST_MSPRO_SHIFT 27
+#define OMAP24XX_ST_MSPRO_MASK (1 << 27)
+#define OMAP24XX_ST_FAC_SHIFT 25
+#define OMAP24XX_ST_FAC_MASK (1 << 25)
+#define OMAP2420_ST_EAC_SHIFT 24
+#define OMAP2420_ST_EAC_MASK (1 << 24)
+#define OMAP24XX_ST_HDQ_SHIFT 23
+#define OMAP24XX_ST_HDQ_MASK (1 << 23)
+#define OMAP2420_ST_I2C2_SHIFT 20
+#define OMAP2420_ST_I2C2_MASK (1 << 20)
+#define OMAP2420_ST_I2C1_SHIFT 19
+#define OMAP2420_ST_I2C1_MASK (1 << 19)
+#define OMAP24XX_ST_MCBSP2_SHIFT 16
+#define OMAP24XX_ST_MCBSP2_MASK (1 << 16)
+#define OMAP24XX_ST_MCBSP1_SHIFT 15
+#define OMAP24XX_ST_MCBSP1_MASK (1 << 15)
+#define OMAP24XX_ST_DSS_SHIFT 0
+#define OMAP24XX_ST_DSS_MASK (1 << 0)
/* CM_IDLEST2_CORE */
-#define OMAP2430_ST_MCBSP5 (1 << 5)
-#define OMAP2430_ST_MCBSP4 (1 << 4)
-#define OMAP2430_ST_MCBSP3 (1 << 3)
-#define OMAP24XX_ST_SSI (1 << 1)
+#define OMAP2430_ST_MCBSP5_SHIFT 5
+#define OMAP2430_ST_MCBSP5_MASK (1 << 5)
+#define OMAP2430_ST_MCBSP4_SHIFT 4
+#define OMAP2430_ST_MCBSP4_MASK (1 << 4)
+#define OMAP2430_ST_MCBSP3_SHIFT 3
+#define OMAP2430_ST_MCBSP3_MASK (1 << 3)
+#define OMAP24XX_ST_SSI_SHIFT 1
+#define OMAP24XX_ST_SSI_MASK (1 << 1)
/* CM_IDLEST3_CORE */
/* 2430 only */
-#define OMAP2430_ST_SDRC (1 << 2)
+#define OMAP2430_ST_SDRC_MASK (1 << 2)
/* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA (1 << 4)
-#define OMAP24XX_ST_AES (1 << 3)
-#define OMAP24XX_ST_RNG (1 << 2)
-#define OMAP24XX_ST_SHA (1 << 1)
-#define OMAP24XX_ST_DES (1 << 0)
+#define OMAP24XX_ST_PKA_SHIFT 4
+#define OMAP24XX_ST_PKA_MASK (1 << 4)
+#define OMAP24XX_ST_AES_SHIFT 3
+#define OMAP24XX_ST_AES_MASK (1 << 3)
+#define OMAP24XX_ST_RNG_SHIFT 2
+#define OMAP24XX_ST_RNG_MASK (1 << 2)
+#define OMAP24XX_ST_SHA_SHIFT 1
+#define OMAP24XX_ST_SHA_MASK (1 << 1)
+#define OMAP24XX_ST_DES_SHIFT 0
+#define OMAP24XX_ST_DES_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
#define OMAP24XX_AUTO_CAM (1 << 31)
@@ -275,11 +296,16 @@
#define OMAP24XX_EN_32KSYNC (1 << 1)
/* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR (1 << 6)
-#define OMAP24XX_ST_OMAPCTRL (1 << 5)
-#define OMAP24XX_ST_WDT1 (1 << 4)
-#define OMAP24XX_ST_MPU_WDT (1 << 3)
-#define OMAP24XX_ST_32KSYNC (1 << 1)
+#define OMAP2430_ST_ICR_SHIFT 6
+#define OMAP2430_ST_ICR_MASK (1 << 6)
+#define OMAP24XX_ST_OMAPCTRL_SHIFT 5
+#define OMAP24XX_ST_OMAPCTRL_MASK (1 << 5)
+#define OMAP24XX_ST_WDT1_SHIFT 4
+#define OMAP24XX_ST_WDT1_MASK (1 << 4)
+#define OMAP24XX_ST_MPU_WDT_SHIFT 3
+#define OMAP24XX_ST_MPU_WDT_MASK (1 << 3)
+#define OMAP24XX_ST_32KSYNC_SHIFT 1
+#define OMAP24XX_ST_32KSYNC_MASK (1 << 1)
/* CM_AUTOIDLE_WKUP */
#define OMAP24XX_AUTO_OMAPCTRL (1 << 5)
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 219f5c8..6f3f5a3 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -183,31 +183,58 @@
#define OMAP3430ES2_EN_CPEFUSE_MASK (1 << 0)
/* CM_IDLEST1_CORE specific bits */
-#define OMAP3430_ST_ICR (1 << 29)
-#define OMAP3430_ST_AES2 (1 << 28)
-#define OMAP3430_ST_SHA12 (1 << 27)
-#define OMAP3430_ST_DES2 (1 << 26)
-#define OMAP3430_ST_MSPRO (1 << 23)
-#define OMAP3430_ST_HDQ (1 << 22)
-#define OMAP3430ES1_ST_FAC (1 << 8)
-#define OMAP3430ES1_ST_MAILBOXES (1 << 7)
-#define OMAP3430_ST_OMAPCTRL (1 << 6)
-#define OMAP3430_ST_SDMA (1 << 2)
-#define OMAP3430_ST_SDRC (1 << 1)
-#define OMAP3430_ST_SSI (1 << 0)
+#define OMAP3430ES2_ST_MMC3_SHIFT 30
+#define OMAP3430ES2_ST_MMC3_MASK (1 << 30)
+#define OMAP3430_ST_ICR_SHIFT 29
+#define OMAP3430_ST_ICR_MASK (1 << 29)
+#define OMAP3430_ST_AES2_SHIFT 28
+#define OMAP3430_ST_AES2_MASK (1 << 28)
+#define OMAP3430_ST_SHA12_SHIFT 27
+#define OMAP3430_ST_SHA12_MASK (1 << 27)
+#define OMAP3430_ST_DES2_SHIFT 26
+#define OMAP3430_ST_DES2_MASK (1 << 26)
+#define OMAP3430_ST_MSPRO_SHIFT 23
+#define OMAP3430_ST_MSPRO_MASK (1 << 23)
+#define OMAP3430_ST_HDQ_SHIFT 22
+#define OMAP3430_ST_HDQ_MASK (1 << 22)
+#define OMAP3430ES1_ST_FAC_SHIFT 8
+#define OMAP3430ES1_ST_FAC_MASK (1 << 8)
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+#define OMAP3430ES2_ST_SSI_IDLE_MASK (1 << 8)
+#define OMAP3430_ST_MAILBOXES_SHIFT 7
+#define OMAP3430_ST_MAILBOXES_MASK (1 << 7)
+#define OMAP3430_ST_OMAPCTRL_SHIFT 6
+#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6)
+#define OMAP3430_ST_SDMA_SHIFT 2
+#define OMAP3430_ST_SDMA_MASK (1 << 2)
+#define OMAP3430_ST_SDRC_SHIFT 1
+#define OMAP3430_ST_SDRC_MASK (1 << 1)
+#define OMAP3430_ST_SSI_STDBY_SHIFT 0
+#define OMAP3430_ST_SSI_STDBY_MASK (1 << 0)
/* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA (1 << 4)
-#define OMAP3430_ST_AES1 (1 << 3)
-#define OMAP3430_ST_RNG (1 << 2)
-#define OMAP3430_ST_SHA11 (1 << 1)
-#define OMAP3430_ST_DES1 (1 << 0)
+#define OMAP3430_ST_PKA_SHIFT 4
+#define OMAP3430_ST_PKA_MASK (1 << 4)
+#define OMAP3430_ST_AES1_SHIFT 3
+#define OMAP3430_ST_AES1_MASK (1 << 3)
+#define OMAP3430_ST_RNG_SHIFT 2
+#define OMAP3430_ST_RNG_MASK (1 << 2)
+#define OMAP3430_ST_SHA11_SHIFT 1
+#define OMAP3430_ST_SHA11_MASK (1 << 1)
+#define OMAP3430_ST_DES1_SHIFT 0
+#define OMAP3430_ST_DES1_MASK (1 << 0)
/* CM_IDLEST3_CORE */
#define OMAP3430ES2_ST_USBTLL_SHIFT 2
#define OMAP3430ES2_ST_USBTLL_MASK (1 << 2)
+#define OMAP3430ES2_ST_CPEFUSE_SHIFT 0
+#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
+#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
+#define OMAP3430ES2_AUTO_ICR (1 << 29)
+#define OMAP3430ES2_AUTO_ICR_SHIFT 29
#define OMAP3430_AUTO_AES2 (1 << 28)
#define OMAP3430_AUTO_AES2_SHIFT 28
#define OMAP3430_AUTO_SHA12 (1 << 27)
@@ -276,6 +303,9 @@
#define OMAP3430_AUTO_DES1_SHIFT 0
/* CM_AUTOIDLE3_CORE */
+#define OMAP3430ES2_AUTO_USBHOST (1 << 0)
+#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0
+#define OMAP3430ES2_AUTO_USBTLL (1 << 2)
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
@@ -332,8 +362,12 @@
#define OMAP3430ES1_CLKACTIVITY_GFX_MASK (1 << 0)
/* CM_FCLKEN_SGX */
-#define OMAP3430ES2_EN_SGX_SHIFT 1
-#define OMAP3430ES2_EN_SGX_MASK (1 << 1)
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT 1
+#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK (1 << 1)
+
+/* CM_ICLKEN_SGX */
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT 0
+#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK (1 << 0)
/* CM_CLKSEL_SGX */
#define OMAP3430ES2_CLKSEL_SGX_SHIFT 0
@@ -349,6 +383,7 @@
/* CM_FCLKEN_WKUP specific bits */
#define OMAP3430ES2_EN_USIMOCP_SHIFT 9
+#define OMAP3430ES2_EN_USIMOCP_MASK (1 << 9)
/* CM_ICLKEN_WKUP specific bits */
#define OMAP3430_EN_WDT1 (1 << 4)
@@ -357,11 +392,18 @@
#define OMAP3430_EN_32KSYNC_SHIFT 2
/* CM_IDLEST_WKUP specific bits */
-#define OMAP3430_ST_WDT2 (1 << 5)
-#define OMAP3430_ST_WDT1 (1 << 4)
-#define OMAP3430_ST_32KSYNC (1 << 2)
+#define OMAP3430ES2_ST_USIMOCP_SHIFT 9
+#define OMAP3430ES2_ST_USIMOCP_MASK (1 << 9)
+#define OMAP3430_ST_WDT2_SHIFT 5
+#define OMAP3430_ST_WDT2_MASK (1 << 5)
+#define OMAP3430_ST_WDT1_SHIFT 4
+#define OMAP3430_ST_WDT1_MASK (1 << 4)
+#define OMAP3430_ST_32KSYNC_SHIFT 2
+#define OMAP3430_ST_32KSYNC_MASK (1 << 2)
/* CM_AUTOIDLE_WKUP */
+#define OMAP3430ES2_AUTO_USIMOCP (1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_SHIFT 9
#define OMAP3430_AUTO_WDT2 (1 << 5)
#define OMAP3430_AUTO_WDT2_SHIFT 5
#define OMAP3430_AUTO_WDT1 (1 << 4)
@@ -426,6 +468,8 @@
#define OMAP3430_ST_CORE_CLK_MASK (1 << 0)
/* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_USIM_CLK_SHIFT 2
+#define OMAP3430ES2_ST_USIM_CLK_MASK (1 << 2)
#define OMAP3430ES2_ST_120M_CLK_SHIFT 1
#define OMAP3430ES2_ST_120M_CLK_MASK (1 << 1)
#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT 0
@@ -449,8 +493,12 @@
#define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16)
#define OMAP3430_CORE_DPLL_DIV_SHIFT 8
#define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8)
-#define OMAP3430_SOURCE_54M (1 << 5)
-#define OMAP3430_SOURCE_48M (1 << 3)
+#define OMAP3430_SOURCE_96M_SHIFT 6
+#define OMAP3430_SOURCE_96M_MASK (1 << 6)
+#define OMAP3430_SOURCE_54M_SHIFT 5
+#define OMAP3430_SOURCE_54M_MASK (1 << 5)
+#define OMAP3430_SOURCE_48M_SHIFT 3
+#define OMAP3430_SOURCE_48M_MASK (1 << 3)
/* CM_CLKSEL2_PLL */
#define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8
@@ -493,7 +541,12 @@
#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT 0
/* CM_IDLEST_DSS */
-#define OMAP3430_ST_DSS (1 << 0)
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_DSS_IDLE_MASK (1 << 1)
+#define OMAP3430ES2_ST_DSS_STDBY_SHIFT 0
+#define OMAP3430ES2_ST_DSS_STDBY_MASK (1 << 0)
+#define OMAP3430ES1_ST_DSS_SHIFT 0
+#define OMAP3430ES1_ST_DSS_MASK (1 << 0)
/* CM_AUTOIDLE_DSS */
#define OMAP3430_AUTO_DSS (1 << 0)
@@ -516,6 +569,8 @@
#define OMAP3430_CLKACTIVITY_DSS_MASK (1 << 0)
/* CM_FCLKEN_CAM specific bits */
+#define OMAP3430_EN_CSI2 (1 << 1)
+#define OMAP3430_EN_CSI2_SHIFT 1
/* CM_ICLKEN_CAM specific bits */
@@ -545,10 +600,14 @@
/* CM_ICLKEN_PER specific bits */
/* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3 (1 << 12)
-#define OMAP3430_ST_MCBSP4 (1 << 2)
-#define OMAP3430_ST_MCBSP3 (1 << 1)
-#define OMAP3430_ST_MCBSP2 (1 << 0)
+#define OMAP3430_ST_WDT3_SHIFT 12
+#define OMAP3430_ST_WDT3_MASK (1 << 12)
+#define OMAP3430_ST_MCBSP4_SHIFT 2
+#define OMAP3430_ST_MCBSP4_MASK (1 << 2)
+#define OMAP3430_ST_MCBSP3_SHIFT 1
+#define OMAP3430_ST_MCBSP3_MASK (1 << 1)
+#define OMAP3430_ST_MCBSP2_SHIFT 0
+#define OMAP3430_ST_MCBSP2_MASK (1 << 0)
/* CM_AUTOIDLE_PER */
#define OMAP3430_AUTO_GPIO6 (1 << 17)
@@ -676,6 +735,10 @@
#define OMAP3430ES2_EN_USBHOST_MASK (1 << 0)
/* CM_IDLEST_USBHOST */
+#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_USBHOST_IDLE_MASK (1 << 1)
+#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT 0
+#define OMAP3430ES2_ST_USBHOST_STDBY_MASK (1 << 0)
/* CM_AUTOIDLE_USBHOST */
#define OMAP3430ES2_AUTO_USBHOST_SHIFT 0
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index ce03fa7..d6b4b2f 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -28,13 +28,121 @@
#include <mach/eac.h>
#include <mach/mmc.h>
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
+#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-static struct resource mbox_resources[] = {
+static struct resource cam_resources[] = {
{
- .start = OMAP2_MBOX_BASE,
- .end = OMAP2_MBOX_BASE + 0x11f,
+ .start = OMAP24XX_CAMERA_BASE,
+ .end = OMAP24XX_CAMERA_BASE + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_CAM_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device omap_cam_device = {
+ .name = "omap24xxcam",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cam_resources),
+ .resource = cam_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+ platform_device_register(&omap_cam_device);
+}
+
+#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+
+static struct resource omap3isp_resources[] = {
+ {
+ .start = OMAP3430_ISP_BASE,
+ .end = OMAP3430_ISP_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CBUFF_BASE,
+ .end = OMAP3430_ISP_CBUFF_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CCP2_BASE,
+ .end = OMAP3430_ISP_CCP2_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CCDC_BASE,
+ .end = OMAP3430_ISP_CCDC_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_HIST_BASE,
+ .end = OMAP3430_ISP_HIST_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_H3A_BASE,
+ .end = OMAP3430_ISP_H3A_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_PREV_BASE,
+ .end = OMAP3430_ISP_PREV_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_RESZ_BASE,
+ .end = OMAP3430_ISP_RESZ_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_SBL_BASE,
+ .end = OMAP3430_ISP_SBL_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CSI2A_BASE,
+ .end = OMAP3430_ISP_CSI2A_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3430_ISP_CSI2PHY_BASE,
+ .end = OMAP3430_ISP_CSI2PHY_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_34XX_CAM_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device omap3isp_device = {
+ .name = "omap3isp",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3isp_resources),
+ .resource = omap3isp_resources,
+};
+
+static inline void omap_init_camera(void)
+{
+ platform_device_register(&omap3isp_device);
+}
+#else
+static inline void omap_init_camera(void)
+{
+}
+#endif
+
+#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+
+#define MBOX_REG_SIZE 0x120
+
+static struct resource omap2_mbox_resources[] = {
+ {
+ .start = OMAP24XX_MAILBOX_BASE,
+ .end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
@@ -47,20 +155,40 @@
},
};
+static struct resource omap3_mbox_resources[] = {
+ {
+ .start = OMAP34XX_MAILBOX_BASE,
+ .end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_MAIL_U0_MPU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device mbox_device = {
- .name = "mailbox",
+ .name = "omap2-mailbox",
.id = -1,
- .num_resources = ARRAY_SIZE(mbox_resources),
- .resource = mbox_resources,
};
static inline void omap_init_mbox(void)
{
+ if (cpu_is_omap2420()) {
+ mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
+ mbox_device.resource = omap2_mbox_resources;
+ } else if (cpu_is_omap3430()) {
+ mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
+ mbox_device.resource = omap3_mbox_resources;
+ } else {
+ pr_err("%s: platform not supported\n", __func__);
+ return;
+ }
platform_device_register(&mbox_device);
}
#else
static inline void omap_init_mbox(void) { }
-#endif
+#endif /* CONFIG_OMAP_MBOX_FWK */
#if defined(CONFIG_OMAP_STI)
@@ -348,11 +476,12 @@
}
dummy_pdev.id = i;
- iclk = clk_get(dev, "mmchs_ick");
+ dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
+ iclk = clk_get(dev, "ick");
if (iclk && clk_enable(iclk))
iclk = NULL;
- fclk = clk_get(dev, "mmchs_fck");
+ fclk = clk_get(dev, "fck");
if (fclk && clk_enable(fclk))
fclk = NULL;
@@ -506,6 +635,7 @@
* in alphabetical order so they're easier to sort through.
*/
omap_hsmmc_reset();
+ omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
omap_hdq_init();
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index b52a02f..34b5914 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -217,8 +217,13 @@
omap_chip.oc = CHIP_IS_OMAP3430;
if (omap_rev() == OMAP3430_REV_ES1_0)
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
- else if (omap_rev() > OMAP3430_REV_ES1_0)
+ else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
+ omap_rev() <= OMAP3430_REV_ES2_1)
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ else if (omap_rev() == OMAP3430_REV_ES3_0)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ else if (omap_rev() == OMAP3430_REV_ES3_1)
+ omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
} else {
pr_err("Uninitialized omap_chip, please fix!\n");
}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5ea64f9..916fcd3 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,8 +27,8 @@
#include <mach/mux.h>
#include <mach/omapfb.h>
#include <mach/sram.h>
-
-#include "memory.h"
+#include <mach/sdrc.h>
+#include <mach/gpmc.h>
#include "clock.h"
@@ -195,12 +195,12 @@
omapfb_reserve_sdram();
}
-void __init omap2_init_common_hw(void)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
- omap2_init_memory();
+ omap2_sdrc_init(sp);
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 32b7af3..fd5b8a5 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -1,9 +1,9 @@
/*
- * Mailbox reservation modules for OMAP2
+ * Mailbox reservation modules for OMAP2/3
*
- * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2006-2009 Nokia Corporation
* Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- * and Paul Mundt <paul.mundt@nokia.com>
+ * and Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -18,40 +18,22 @@
#include <mach/mailbox.h>
#include <mach/irqs.h>
-#define MAILBOX_REVISION 0x00
-#define MAILBOX_SYSCONFIG 0x10
-#define MAILBOX_SYSSTATUS 0x14
-#define MAILBOX_MESSAGE_0 0x40
-#define MAILBOX_MESSAGE_1 0x44
-#define MAILBOX_MESSAGE_2 0x48
-#define MAILBOX_MESSAGE_3 0x4c
-#define MAILBOX_MESSAGE_4 0x50
-#define MAILBOX_MESSAGE_5 0x54
-#define MAILBOX_FIFOSTATUS_0 0x80
-#define MAILBOX_FIFOSTATUS_1 0x84
-#define MAILBOX_FIFOSTATUS_2 0x88
-#define MAILBOX_FIFOSTATUS_3 0x8c
-#define MAILBOX_FIFOSTATUS_4 0x90
-#define MAILBOX_FIFOSTATUS_5 0x94
-#define MAILBOX_MSGSTATUS_0 0xc0
-#define MAILBOX_MSGSTATUS_1 0xc4
-#define MAILBOX_MSGSTATUS_2 0xc8
-#define MAILBOX_MSGSTATUS_3 0xcc
-#define MAILBOX_MSGSTATUS_4 0xd0
-#define MAILBOX_MSGSTATUS_5 0xd4
-#define MAILBOX_IRQSTATUS_0 0x100
-#define MAILBOX_IRQENABLE_0 0x104
-#define MAILBOX_IRQSTATUS_1 0x108
-#define MAILBOX_IRQENABLE_1 0x10c
-#define MAILBOX_IRQSTATUS_2 0x110
-#define MAILBOX_IRQENABLE_2 0x114
-#define MAILBOX_IRQSTATUS_3 0x118
-#define MAILBOX_IRQENABLE_3 0x11c
+#define MAILBOX_REVISION 0x000
+#define MAILBOX_SYSCONFIG 0x010
+#define MAILBOX_SYSSTATUS 0x014
+#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
+#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m))
+#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m))
+#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u))
+#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u))
-static unsigned long mbox_base;
+#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u)))
+#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1))
-#define MAILBOX_IRQ_NOTFULL(n) (1 << (2 * (n) + 1))
-#define MAILBOX_IRQ_NEWMSG(n) (1 << (2 * (n)))
+#define MBOX_REG_SIZE 0x120
+#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
+
+static void __iomem *mbox_base;
struct omap_mbox2_fifo {
unsigned long msg;
@@ -66,6 +48,7 @@
unsigned long irqstatus;
u32 newmsg_bit;
u32 notfull_bit;
+ u32 ctx[MBOX_NR_REGS];
};
static struct clk *mbox_ick_handle;
@@ -73,14 +56,14 @@
static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq);
-static inline unsigned int mbox_read_reg(unsigned int reg)
+static inline unsigned int mbox_read_reg(size_t ofs)
{
- return __raw_readl(mbox_base + reg);
+ return __raw_readl(mbox_base + ofs);
}
-static inline void mbox_write_reg(unsigned int val, unsigned int reg)
+static inline void mbox_write_reg(u32 val, size_t ofs)
{
- __raw_writel(val, mbox_base + reg);
+ __raw_writel(val, mbox_base + ofs);
}
/* Mailbox H/W preparations */
@@ -95,6 +78,9 @@
}
clk_enable(mbox_ick_handle);
+ l = mbox_read_reg(MAILBOX_REVISION);
+ pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+
/* set smart-idle & autoidle */
l = mbox_read_reg(MAILBOX_SYSCONFIG);
l |= 0x00000011;
@@ -183,6 +169,32 @@
return (enable & status & bit);
}
+static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ int i;
+ struct omap_mbox2_priv *p = mbox->priv;
+
+ for (i = 0; i < MBOX_NR_REGS; i++) {
+ p->ctx[i] = mbox_read_reg(i * sizeof(u32));
+
+ dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+ i, p->ctx[i]);
+ }
+}
+
+static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ int i;
+ struct omap_mbox2_priv *p = mbox->priv;
+
+ for (i = 0; i < MBOX_NR_REGS; i++) {
+ mbox_write_reg(p->ctx[i], i * sizeof(u32));
+
+ dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
+ i, p->ctx[i]);
+ }
+}
+
static struct omap_mbox_ops omap2_mbox_ops = {
.type = OMAP_MBOX_TYPE2,
.startup = omap2_mbox_startup,
@@ -195,6 +207,8 @@
.disable_irq = omap2_mbox_disable_irq,
.ack_irq = omap2_mbox_ack_irq,
.is_irq = omap2_mbox_is_irq,
+ .save_ctx = omap2_mbox_save_ctx,
+ .restore_ctx = omap2_mbox_restore_ctx,
};
/*
@@ -209,15 +223,15 @@
/* DSP */
static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
.tx_fifo = {
- .msg = MAILBOX_MESSAGE_0,
- .fifo_stat = MAILBOX_FIFOSTATUS_0,
+ .msg = MAILBOX_MESSAGE(0),
+ .fifo_stat = MAILBOX_FIFOSTATUS(0),
},
.rx_fifo = {
- .msg = MAILBOX_MESSAGE_1,
- .msg_stat = MAILBOX_MSGSTATUS_1,
+ .msg = MAILBOX_MESSAGE(1),
+ .msg_stat = MAILBOX_MSGSTATUS(1),
},
- .irqenable = MAILBOX_IRQENABLE_0,
- .irqstatus = MAILBOX_IRQSTATUS_0,
+ .irqenable = MAILBOX_IRQENABLE(0),
+ .irqstatus = MAILBOX_IRQSTATUS(0),
.notfull_bit = MAILBOX_IRQ_NOTFULL(0),
.newmsg_bit = MAILBOX_IRQ_NEWMSG(1),
};
@@ -229,18 +243,18 @@
};
EXPORT_SYMBOL(mbox_dsp_info);
-/* IVA */
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
static struct omap_mbox2_priv omap2_mbox_iva_priv = {
.tx_fifo = {
- .msg = MAILBOX_MESSAGE_2,
- .fifo_stat = MAILBOX_FIFOSTATUS_2,
+ .msg = MAILBOX_MESSAGE(2),
+ .fifo_stat = MAILBOX_FIFOSTATUS(2),
},
.rx_fifo = {
- .msg = MAILBOX_MESSAGE_3,
- .msg_stat = MAILBOX_MSGSTATUS_3,
+ .msg = MAILBOX_MESSAGE(3),
+ .msg_stat = MAILBOX_MSGSTATUS(3),
},
- .irqenable = MAILBOX_IRQENABLE_3,
- .irqstatus = MAILBOX_IRQSTATUS_3,
+ .irqenable = MAILBOX_IRQENABLE(3),
+ .irqstatus = MAILBOX_IRQSTATUS(3),
.notfull_bit = MAILBOX_IRQ_NOTFULL(2),
.newmsg_bit = MAILBOX_IRQ_NEWMSG(3),
};
@@ -250,17 +264,12 @@
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
+#endif
-static int __init omap2_mbox_probe(struct platform_device *pdev)
+static int __devinit omap2_mbox_probe(struct platform_device *pdev)
{
struct resource *res;
- int ret = 0;
-
- if (pdev->num_resources != 3) {
- dev_err(&pdev->dev, "invalid number of resources: %d\n",
- pdev->num_resources);
- return -ENODEV;
- }
+ int ret;
/* MBOX base */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -268,42 +277,61 @@
dev_err(&pdev->dev, "invalid mem resource\n");
return -ENODEV;
}
- mbox_base = res->start;
+ mbox_base = ioremap(res->start, res->end - res->start);
+ if (!mbox_base)
+ return -ENOMEM;
- /* DSP IRQ */
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (unlikely(!res)) {
+ /* DSP or IVA2 IRQ */
+ mbox_dsp_info.irq = platform_get_irq(pdev, 0);
+ if (mbox_dsp_info.irq < 0) {
dev_err(&pdev->dev, "invalid irq resource\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_dsp;
}
- mbox_dsp_info.irq = res->start;
- ret = omap_mbox_register(&mbox_dsp_info);
+ ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+ if (ret)
+ goto err_dsp;
- /* IVA IRQ */
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
- if (unlikely(!res)) {
- dev_err(&pdev->dev, "invalid irq resource\n");
- return -ENODEV;
+#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
+ if (cpu_is_omap2420()) {
+ /* IVA IRQ */
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "invalid irq resource\n");
+ ret = -ENODEV;
+ goto err_iva1;
+ }
+ mbox_iva_info.irq = res->start;
+ ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
+ if (ret)
+ goto err_iva1;
}
- mbox_iva_info.irq = res->start;
+#endif
+ return 0;
- ret = omap_mbox_register(&mbox_iva_info);
-
+err_iva1:
+ omap_mbox_unregister(&mbox_dsp_info);
+err_dsp:
+ iounmap(mbox_base);
return ret;
}
-static int omap2_mbox_remove(struct platform_device *pdev)
+static int __devexit omap2_mbox_remove(struct platform_device *pdev)
{
+#if defined(CONFIG_ARCH_OMAP2420)
+ omap_mbox_unregister(&mbox_iva_info);
+#endif
omap_mbox_unregister(&mbox_dsp_info);
+ iounmap(mbox_base);
return 0;
}
static struct platform_driver omap2_mbox_driver = {
.probe = omap2_mbox_probe,
- .remove = omap2_mbox_remove,
+ .remove = __devexit_p(omap2_mbox_remove),
.driver = {
- .name = "mailbox",
+ .name = "omap2-mailbox",
},
};
@@ -320,4 +348,7 @@
module_init(omap2_mbox_init);
module_exit(omap2_mbox_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a9e631f..a5c0f04 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -24,8 +24,6 @@
#include <mach/cpu.h>
#include <mach/mcbsp.h>
-const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
-
static void omap2_mcbsp2_mux_setup(void)
{
omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
@@ -57,8 +55,6 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -67,8 +63,6 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -86,8 +80,6 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -96,8 +88,6 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@@ -106,8 +96,6 @@
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@@ -116,8 +104,6 @@
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@@ -126,8 +112,6 @@
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -145,8 +129,6 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
@@ -155,8 +137,6 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
@@ -165,8 +145,6 @@
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
@@ -175,8 +153,6 @@
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
@@ -185,8 +161,6 @@
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_names = clk_names,
- .num_clks = 2,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
deleted file mode 100644
index bb3db80..0000000
--- a/arch/arm/mach-omap2/memory.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/memory.h
- *
- * Interface for memory timing related functions for OMAP24XX
- *
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Copyright (C) 2005 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
-#define ARCH_ARM_MACH_OMAP2_MEMORY_H
-
-/* Memory timings */
-#define M_DDR 1
-#define M_LOCK_CTRL (1 << 2)
-#define M_UNLOCK 0
-#define M_LOCK 1
-
-struct memory_timings {
- u32 m_type; /* ddr = 1, sdr = 0 */
- u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
- u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
- u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
- u32 base_cs; /* base chip select to use for calculations */
-};
-
-extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
-extern u32 omap2_memory_get_slow_dll_ctrl(void);
-extern u32 omap2_memory_get_fast_dll_ctrl(void);
-extern u32 omap2_memory_get_type(void);
-u32 omap2_dll_force_needed(void);
-u32 omap2_reprogram_sdrc(u32 level, u32 force);
-void __init omap2_init_memory(void);
-void __init gpmc_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 437f520..dc40b3e 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <mach/control.h>
@@ -44,6 +45,7 @@
#define VMMC2_315V 0x0c
#define VMMC2_300V 0x0b
#define VMMC2_285V 0x0a
+#define VMMC2_280V 0x09
#define VMMC2_260V 0x08
#define VMMC2_185V 0x06
#define VMMC2_DEDICATED 0x2E
@@ -59,8 +61,8 @@
struct omap_mmc_platform_data *mmc;
u8 twl_vmmc_dev_grp;
u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN];
-} hsmmc[] = {
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC] = {
{
.twl_vmmc_dev_grp = VMMC1_DEV_GRP,
.twl_mmc_dedicated = VMMC1_DEDICATED,
@@ -98,6 +100,14 @@
return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
}
+static int twl_mmc_get_cover_state(struct device *dev, int slot)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ /* NOTE: assumes card detect signal is active-low */
+ return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+}
+
/*
* MMC Slot Initialization.
*/
@@ -166,66 +176,85 @@
/*
* Sets the MMC voltage in twl4030
*/
+
+#define MMC1_OCR (MMC_VDD_165_195 \
+ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+#define MMC2_OCR (MMC_VDD_165_195 \
+ |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
+ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
+
static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
{
int ret;
- u8 vmmc, dev_grp_val;
+ u8 vmmc = 0, dev_grp_val;
- switch (1 << vdd) {
- case MMC_VDD_35_36:
- case MMC_VDD_34_35:
- case MMC_VDD_33_34:
- case MMC_VDD_32_33:
- case MMC_VDD_31_32:
- case MMC_VDD_30_31:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_315V;
- else
- vmmc = VMMC2_315V;
- break;
- case MMC_VDD_29_30:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_315V;
- else
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_27_28:
- case MMC_VDD_26_27:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_285V;
- else
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_24_25:
- case MMC_VDD_23_24:
- case MMC_VDD_22_23:
- case MMC_VDD_21_22:
- case MMC_VDD_20_21:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
- vmmc = VMMC1_285V;
- else
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_165_195:
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP)
+ if (!vdd)
+ goto doit;
+
+ if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
+ /* VMMC1: max 220 mA. And for 8-bit mode,
+ * VSIM: max 50 mA
+ */
+ switch (1 << vdd) {
+ case MMC_VDD_165_195:
vmmc = VMMC1_185V;
- else
+ /* and VSIM_180V */
+ break;
+ case MMC_VDD_28_29:
+ vmmc = VMMC1_285V;
+ /* and VSIM_280V */
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ vmmc = VMMC1_300V;
+ /* and VSIM_300V */
+ break;
+ case MMC_VDD_31_32:
+ vmmc = VMMC1_315V;
+ /* error if VSIM needed */
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
+ /* VMMC2: max 100 mA */
+ switch (1 << vdd) {
+ case MMC_VDD_165_195:
vmmc = VMMC2_185V;
- break;
- default:
- vmmc = 0;
- break;
+ break;
+ case MMC_VDD_25_26:
+ case MMC_VDD_26_27:
+ vmmc = VMMC2_260V;
+ break;
+ case MMC_VDD_27_28:
+ vmmc = VMMC2_280V;
+ break;
+ case MMC_VDD_28_29:
+ vmmc = VMMC2_285V;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ vmmc = VMMC2_300V;
+ break;
+ case MMC_VDD_31_32:
+ vmmc = VMMC2_315V;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ return -EINVAL;
}
- if (vmmc)
+doit:
+ if (vdd)
dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
else
dev_grp_val = LDO_CLR; /* Power down */
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret)
+ if (ret || !vdd)
return ret;
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
@@ -242,6 +271,14 @@
struct twl_mmc_controller *c = &hsmmc[0];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /*
+ * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+ * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * 1.8V and 3.0V modes, controlled by the PBIAS register.
+ *
+ * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+ * is most naturally TWL VSIM; those pins also use PBIAS.
+ */
if (power_on) {
if (cpu_is_omap2430()) {
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
@@ -298,6 +335,12 @@
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /*
+ * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * VDDS is used to power the pins, optionally with a transceiver to
+ * support cards using voltages other than VDDS (1.8V nominal). When a
+ * transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ */
if (power_on) {
if (mmc->slots[0].internal_clock) {
u32 reg;
@@ -314,6 +357,16 @@
return ret;
}
+static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ /*
+ * Assume MMC3 has self-powered device connected, for example on-board
+ * chip with external power source.
+ */
+ return 0;
+}
+
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -349,13 +402,13 @@
return;
}
- sprintf(twl->name, "mmc%islot%i", c->mmc, 1);
+ if (c->name)
+ strncpy(twl->name, c->name, HSMMC_NAME_LEN);
+ else
+ snprintf(twl->name, ARRAY_SIZE(twl->name),
+ "mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = twl->name;
mmc->nr_slots = 1;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
- MMC_VDD_26_27 | MMC_VDD_27_28 |
- MMC_VDD_29_30 |
- MMC_VDD_30_31 | MMC_VDD_31_32;
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
@@ -369,7 +422,10 @@
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
- mmc->slots[0].card_detect = twl_mmc_card_detect;
+ if (c->cover_only)
+ mmc->slots[0].get_cover_state = twl_mmc_get_cover_state;
+ else
+ mmc->slots[0].card_detect = twl_mmc_card_detect;
} else
mmc->slots[0].switch_pin = -EINVAL;
@@ -385,24 +441,43 @@
/* NOTE: we assume OMAP's MMC1 and MMC2 use
* the TWL4030's VMMC1 and VMMC2, respectively;
- * and that OMAP's MMC3 isn't used.
+ * and that MMC3 device has it's own power source.
*/
switch (c->mmc) {
case 1:
mmc->slots[0].set_power = twl_mmc1_set_power;
+ mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
mmc->slots[0].set_power = twl_mmc2_set_power;
+ if (c->transceiver)
+ mmc->slots[0].ocr_mask = MMC2_OCR;
+ else
+ mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ break;
+ case 3:
+ mmc->slots[0].set_power = twl_mmc3_set_power;
+ mmc->slots[0].ocr_mask = MMC_VDD_165_195;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
+ kfree(mmc);
continue;
}
hsmmc_data[c->mmc - 1] = mmc;
}
omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+ /* pass the device nodes back to board setup code */
+ for (c = controllers; c->mmc; c++) {
+ struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+ if (!c->mmc || c->mmc > nr_hsmmc)
+ continue;
+ c->dev = mmc->dev;
+ }
}
#endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index e1c8076..ea59e86 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -9,9 +9,13 @@
struct twl4030_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
+ bool transceiver; /* MMC-2 option */
+ bool ext_clock; /* use external pin for input clock */
+ bool cover_only; /* No card detect - just cover switch */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
- int ext_clock:1; /* use external pin for input clock */
+ char *name; /* or NULL for default */
+ struct device *dev; /* returned: pointer to mmc adapter */
};
#if defined(CONFIG_TWL4030_CORE) && \
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index dacb41f..026c4fc 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -453,10 +453,37 @@
/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
+ * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
* No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
*/
+MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
};
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 55361c1..ea8ceae 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -103,7 +103,7 @@
.valid = suspend_valid_only_mem,
};
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
{
return 0;
}
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 1e151fa..691470e 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -171,13 +171,19 @@
&iva2_pwrdm,
&mpu_34xx_pwrdm,
&neon_pwrdm,
- &core_34xx_pwrdm,
+ &core_34xx_pre_es3_1_pwrdm,
+ &core_34xx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
&sgx_pwrdm,
&usbhost_pwrdm,
+ &dpll1_pwrdm,
+ &dpll2_pwrdm,
+ &dpll3_pwrdm,
+ &dpll4_pwrdm,
+ &dpll5_pwrdm,
#endif
NULL
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index f573f71..4dcf94b 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -200,10 +200,12 @@
};
/* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_pwrdm = {
+static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
+ CHIP_IS_OMAP3430ES2 |
+ CHIP_IS_OMAP3430ES3_0),
.pwrsts = PWRSTS_OFF_RET_ON,
.dep_bit = OMAP3430_EN_CORE_SHIFT,
.banks = 2,
@@ -217,6 +219,25 @@
},
};
+/* No wkdeps or sleepdeps for 34xx core apparently */
+static struct powerdomain core_34xx_es3_1_pwrdm = {
+ .name = "core_pwrdm",
+ .prcm_offs = CORE_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
+ .pwrsts = PWRSTS_OFF_RET_ON,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
+ .banks = 2,
+ .pwrsts_mem_ret = {
+ [0] = PWRSTS_OFF_RET, /* MEM1RETSTATE */
+ [1] = PWRSTS_OFF_RET, /* MEM2RETSTATE */
+ },
+ .pwrsts_mem_on = {
+ [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
+ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
+ },
+};
+
/* Another case of bit name collisions between several registers: EN_DSS */
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
@@ -236,14 +257,19 @@
},
};
+/*
+ * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
+ * possible SGX powerstate, the SGX device itself does not support
+ * retention.
+ */
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.wkdep_srcs = gfx_sgx_wkdeps,
.sleepdep_srcs = cam_gfx_sleepdeps,
/* XXX This is accurate for 3430 SGX, but what about GFX? */
- .pwrsts = PWRSTS_OFF_RET_ON,
+ .pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
.banks = 1,
.pwrsts_mem_ret = {
@@ -307,11 +333,12 @@
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.wkdep_srcs = per_usbhost_wkdeps,
.sleepdep_srcs = dss_per_usbhost_sleepdeps,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRDM_POWER_RET,
+ .flags = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
.banks = 1,
.pwrsts_mem_ret = {
[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
@@ -321,6 +348,37 @@
},
};
+static struct powerdomain dpll1_pwrdm = {
+ .name = "dpll1_pwrdm",
+ .prcm_offs = MPU_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll2_pwrdm = {
+ .name = "dpll2_pwrdm",
+ .prcm_offs = OMAP3430_IVA2_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll3_pwrdm = {
+ .name = "dpll3_pwrdm",
+ .prcm_offs = PLL_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll4_pwrdm = {
+ .name = "dpll4_pwrdm",
+ .prcm_offs = PLL_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static struct powerdomain dpll5_pwrdm = {
+ .name = "dpll5_pwrdm",
+ .prcm_offs = PLL_MOD,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+};
+
+
#endif /* CONFIG_ARCH_OMAP34XX */
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 4a32822..812d50e 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -113,33 +113,58 @@
#define OMAP2430_EN_USBHS (1 << 6)
/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
-#define OMAP2420_ST_MMC (1 << 26)
-#define OMAP24XX_ST_UART2 (1 << 22)
-#define OMAP24XX_ST_UART1 (1 << 21)
-#define OMAP24XX_ST_MCSPI2 (1 << 18)
-#define OMAP24XX_ST_MCSPI1 (1 << 17)
-#define OMAP24XX_ST_GPT12 (1 << 14)
-#define OMAP24XX_ST_GPT11 (1 << 13)
-#define OMAP24XX_ST_GPT10 (1 << 12)
-#define OMAP24XX_ST_GPT9 (1 << 11)
-#define OMAP24XX_ST_GPT8 (1 << 10)
-#define OMAP24XX_ST_GPT7 (1 << 9)
-#define OMAP24XX_ST_GPT6 (1 << 8)
-#define OMAP24XX_ST_GPT5 (1 << 7)
-#define OMAP24XX_ST_GPT4 (1 << 6)
-#define OMAP24XX_ST_GPT3 (1 << 5)
-#define OMAP24XX_ST_GPT2 (1 << 4)
-#define OMAP2420_ST_VLYNQ (1 << 3)
+#define OMAP2420_ST_MMC_SHIFT 26
+#define OMAP2420_ST_MMC_MASK (1 << 26)
+#define OMAP24XX_ST_UART2_SHIFT 22
+#define OMAP24XX_ST_UART2_MASK (1 << 22)
+#define OMAP24XX_ST_UART1_SHIFT 21
+#define OMAP24XX_ST_UART1_MASK (1 << 21)
+#define OMAP24XX_ST_MCSPI2_SHIFT 18
+#define OMAP24XX_ST_MCSPI2_MASK (1 << 18)
+#define OMAP24XX_ST_MCSPI1_SHIFT 17
+#define OMAP24XX_ST_MCSPI1_MASK (1 << 17)
+#define OMAP24XX_ST_GPT12_SHIFT 14
+#define OMAP24XX_ST_GPT12_MASK (1 << 14)
+#define OMAP24XX_ST_GPT11_SHIFT 13
+#define OMAP24XX_ST_GPT11_MASK (1 << 13)
+#define OMAP24XX_ST_GPT10_SHIFT 12
+#define OMAP24XX_ST_GPT10_MASK (1 << 12)
+#define OMAP24XX_ST_GPT9_SHIFT 11
+#define OMAP24XX_ST_GPT9_MASK (1 << 11)
+#define OMAP24XX_ST_GPT8_SHIFT 10
+#define OMAP24XX_ST_GPT8_MASK (1 << 10)
+#define OMAP24XX_ST_GPT7_SHIFT 9
+#define OMAP24XX_ST_GPT7_MASK (1 << 9)
+#define OMAP24XX_ST_GPT6_SHIFT 8
+#define OMAP24XX_ST_GPT6_MASK (1 << 8)
+#define OMAP24XX_ST_GPT5_SHIFT 7
+#define OMAP24XX_ST_GPT5_MASK (1 << 7)
+#define OMAP24XX_ST_GPT4_SHIFT 6
+#define OMAP24XX_ST_GPT4_MASK (1 << 6)
+#define OMAP24XX_ST_GPT3_SHIFT 5
+#define OMAP24XX_ST_GPT3_MASK (1 << 5)
+#define OMAP24XX_ST_GPT2_SHIFT 4
+#define OMAP24XX_ST_GPT2_MASK (1 << 4)
+#define OMAP2420_ST_VLYNQ_SHIFT 3
+#define OMAP2420_ST_VLYNQ_MASK (1 << 3)
/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
-#define OMAP2430_ST_MDM_INTC (1 << 11)
-#define OMAP2430_ST_GPIO5 (1 << 10)
-#define OMAP2430_ST_MCSPI3 (1 << 9)
-#define OMAP2430_ST_MMCHS2 (1 << 8)
-#define OMAP2430_ST_MMCHS1 (1 << 7)
-#define OMAP2430_ST_USBHS (1 << 6)
-#define OMAP24XX_ST_UART3 (1 << 2)
-#define OMAP24XX_ST_USB (1 << 0)
+#define OMAP2430_ST_MDM_INTC_SHIFT 11
+#define OMAP2430_ST_MDM_INTC_MASK (1 << 11)
+#define OMAP2430_ST_GPIO5_SHIFT 10
+#define OMAP2430_ST_GPIO5_MASK (1 << 10)
+#define OMAP2430_ST_MCSPI3_SHIFT 9
+#define OMAP2430_ST_MCSPI3_MASK (1 << 9)
+#define OMAP2430_ST_MMCHS2_SHIFT 8
+#define OMAP2430_ST_MMCHS2_MASK (1 << 8)
+#define OMAP2430_ST_MMCHS1_SHIFT 7
+#define OMAP2430_ST_MMCHS1_MASK (1 << 7)
+#define OMAP2430_ST_USBHS_SHIFT 6
+#define OMAP2430_ST_USBHS_MASK (1 << 6)
+#define OMAP24XX_ST_UART3_SHIFT 2
+#define OMAP24XX_ST_UART3_MASK (1 << 2)
+#define OMAP24XX_ST_USB_SHIFT 0
+#define OMAP24XX_ST_USB_MASK (1 << 0)
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP24XX_EN_GPIOS_SHIFT 2
@@ -148,11 +173,13 @@
#define OMAP24XX_EN_GPT1 (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS (1 << 2)
-#define OMAP24XX_ST_GPT1 (1 << 0)
+#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
+#define OMAP24XX_ST_GPIOS_MASK 2
+#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
+#define OMAP24XX_ST_GPT1_MASK 0
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
@@ -205,24 +232,46 @@
#define OMAP3430_EN_HSOTGUSB_SHIFT 4
/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
-#define OMAP3430_ST_MMC2 (1 << 25)
-#define OMAP3430_ST_MMC1 (1 << 24)
-#define OMAP3430_ST_MCSPI4 (1 << 21)
-#define OMAP3430_ST_MCSPI3 (1 << 20)
-#define OMAP3430_ST_MCSPI2 (1 << 19)
-#define OMAP3430_ST_MCSPI1 (1 << 18)
-#define OMAP3430_ST_I2C3 (1 << 17)
-#define OMAP3430_ST_I2C2 (1 << 16)
-#define OMAP3430_ST_I2C1 (1 << 15)
-#define OMAP3430_ST_UART2 (1 << 14)
-#define OMAP3430_ST_UART1 (1 << 13)
-#define OMAP3430_ST_GPT11 (1 << 12)
-#define OMAP3430_ST_GPT10 (1 << 11)
-#define OMAP3430_ST_MCBSP5 (1 << 10)
-#define OMAP3430_ST_MCBSP1 (1 << 9)
-#define OMAP3430_ST_FSHOSTUSB (1 << 5)
-#define OMAP3430_ST_HSOTGUSB (1 << 4)
-#define OMAP3430_ST_D2D (1 << 3)
+#define OMAP3430_ST_MMC2_SHIFT 25
+#define OMAP3430_ST_MMC2_MASK (1 << 25)
+#define OMAP3430_ST_MMC1_SHIFT 24
+#define OMAP3430_ST_MMC1_MASK (1 << 24)
+#define OMAP3430_ST_MCSPI4_SHIFT 21
+#define OMAP3430_ST_MCSPI4_MASK (1 << 21)
+#define OMAP3430_ST_MCSPI3_SHIFT 20
+#define OMAP3430_ST_MCSPI3_MASK (1 << 20)
+#define OMAP3430_ST_MCSPI2_SHIFT 19
+#define OMAP3430_ST_MCSPI2_MASK (1 << 19)
+#define OMAP3430_ST_MCSPI1_SHIFT 18
+#define OMAP3430_ST_MCSPI1_MASK (1 << 18)
+#define OMAP3430_ST_I2C3_SHIFT 17
+#define OMAP3430_ST_I2C3_MASK (1 << 17)
+#define OMAP3430_ST_I2C2_SHIFT 16
+#define OMAP3430_ST_I2C2_MASK (1 << 16)
+#define OMAP3430_ST_I2C1_SHIFT 15
+#define OMAP3430_ST_I2C1_MASK (1 << 15)
+#define OMAP3430_ST_UART2_SHIFT 14
+#define OMAP3430_ST_UART2_MASK (1 << 14)
+#define OMAP3430_ST_UART1_SHIFT 13
+#define OMAP3430_ST_UART1_MASK (1 << 13)
+#define OMAP3430_ST_GPT11_SHIFT 12
+#define OMAP3430_ST_GPT11_MASK (1 << 12)
+#define OMAP3430_ST_GPT10_SHIFT 11
+#define OMAP3430_ST_GPT10_MASK (1 << 11)
+#define OMAP3430_ST_MCBSP5_SHIFT 10
+#define OMAP3430_ST_MCBSP5_MASK (1 << 10)
+#define OMAP3430_ST_MCBSP1_SHIFT 9
+#define OMAP3430_ST_MCBSP1_MASK (1 << 9)
+#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT 5
+#define OMAP3430ES1_ST_FSHOSTUSB_MASK (1 << 5)
+#define OMAP3430ES1_ST_HSOTGUSB_SHIFT 4
+#define OMAP3430ES1_ST_HSOTGUSB_MASK (1 << 4)
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK (1 << 5)
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT 4
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK (1 << 4)
+#define OMAP3430_ST_D2D_SHIFT 3
+#define OMAP3430_ST_D2D_MASK (1 << 3)
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
@@ -241,11 +290,16 @@
#define OMAP3430_EN_GPT12_SHIFT 1
/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
-#define OMAP3430_ST_SR2 (1 << 7)
-#define OMAP3430_ST_SR1 (1 << 6)
-#define OMAP3430_ST_GPIO1 (1 << 3)
-#define OMAP3430_ST_GPT12 (1 << 1)
-#define OMAP3430_ST_GPT1 (1 << 0)
+#define OMAP3430_ST_SR2_SHIFT 7
+#define OMAP3430_ST_SR2_MASK (1 << 7)
+#define OMAP3430_ST_SR1_SHIFT 6
+#define OMAP3430_ST_SR1_MASK (1 << 6)
+#define OMAP3430_ST_GPIO1_SHIFT 3
+#define OMAP3430_ST_GPIO1_MASK (1 << 3)
+#define OMAP3430_ST_GPT12_SHIFT 1
+#define OMAP3430_ST_GPT12_MASK (1 << 1)
+#define OMAP3430_ST_GPT1_SHIFT 0
+#define OMAP3430_ST_GPT1_MASK (1 << 0)
/*
* CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
@@ -296,20 +350,34 @@
#define OMAP3430_EN_MCBSP2_SHIFT 0
/* CM_IDLEST_PER, PM_WKST_PER shared bits */
-#define OMAP3430_ST_GPIO6 (1 << 17)
-#define OMAP3430_ST_GPIO5 (1 << 16)
-#define OMAP3430_ST_GPIO4 (1 << 15)
-#define OMAP3430_ST_GPIO3 (1 << 14)
-#define OMAP3430_ST_GPIO2 (1 << 13)
-#define OMAP3430_ST_UART3 (1 << 11)
-#define OMAP3430_ST_GPT9 (1 << 10)
-#define OMAP3430_ST_GPT8 (1 << 9)
-#define OMAP3430_ST_GPT7 (1 << 8)
-#define OMAP3430_ST_GPT6 (1 << 7)
-#define OMAP3430_ST_GPT5 (1 << 6)
-#define OMAP3430_ST_GPT4 (1 << 5)
-#define OMAP3430_ST_GPT3 (1 << 4)
-#define OMAP3430_ST_GPT2 (1 << 3)
+#define OMAP3430_ST_GPIO6_SHIFT 17
+#define OMAP3430_ST_GPIO6_MASK (1 << 17)
+#define OMAP3430_ST_GPIO5_SHIFT 16
+#define OMAP3430_ST_GPIO5_MASK (1 << 16)
+#define OMAP3430_ST_GPIO4_SHIFT 15
+#define OMAP3430_ST_GPIO4_MASK (1 << 15)
+#define OMAP3430_ST_GPIO3_SHIFT 14
+#define OMAP3430_ST_GPIO3_MASK (1 << 14)
+#define OMAP3430_ST_GPIO2_SHIFT 13
+#define OMAP3430_ST_GPIO2_MASK (1 << 13)
+#define OMAP3430_ST_UART3_SHIFT 11
+#define OMAP3430_ST_UART3_MASK (1 << 11)
+#define OMAP3430_ST_GPT9_SHIFT 10
+#define OMAP3430_ST_GPT9_MASK (1 << 10)
+#define OMAP3430_ST_GPT8_SHIFT 9
+#define OMAP3430_ST_GPT8_MASK (1 << 9)
+#define OMAP3430_ST_GPT7_SHIFT 8
+#define OMAP3430_ST_GPT7_MASK (1 << 8)
+#define OMAP3430_ST_GPT6_SHIFT 7
+#define OMAP3430_ST_GPT6_MASK (1 << 7)
+#define OMAP3430_ST_GPT5_SHIFT 6
+#define OMAP3430_ST_GPT5_MASK (1 << 6)
+#define OMAP3430_ST_GPT4_SHIFT 5
+#define OMAP3430_ST_GPT4_MASK (1 << 5)
+#define OMAP3430_ST_GPT3_SHIFT 4
+#define OMAP3430_ST_GPT3_MASK (1 << 4)
+#define OMAP3430_ST_GPT2_SHIFT 3
+#define OMAP3430_ST_GPT2_MASK (1 << 3)
/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
#define OMAP3430_EN_CORE_SHIFT 0
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 5b5ecfe..c6a7940 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -366,6 +366,7 @@
/* PM_WKEN_WKUP specific bits */
#define OMAP3430_EN_IO (1 << 8)
+#define OMAP3430_EN_GPIO1 (1 << 3)
/* PM_MPUGRPSEL_WKUP specific bits */
@@ -452,6 +453,14 @@
#define OMAP3430_CMDRA0_MASK (0xff << 0)
/* PRM_VC_CMD_VAL_0 specific bits */
+#define OMAP3430_VC_CMD_ON_SHIFT 24
+#define OMAP3430_VC_CMD_ON_MASK (0xFF << 24)
+#define OMAP3430_VC_CMD_ONLP_SHIFT 16
+#define OMAP3430_VC_CMD_ONLP_MASK (0xFF << 16)
+#define OMAP3430_VC_CMD_RET_SHIFT 8
+#define OMAP3430_VC_CMD_RET_MASK (0xFF << 8)
+#define OMAP3430_VC_CMD_OFF_SHIFT 0
+#define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0)
/* PRM_VC_CMD_VAL_1 specific bits */
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index e4dc4b1..826d326 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -141,6 +141,19 @@
#define PM_PWSTCTRL 0x00e0
#define PM_PWSTST 0x00e4
+/* Omap2 specific registers */
+#define OMAP24XX_PM_WKEN2 0x00a4
+#define OMAP24XX_PM_WKST2 0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
+
+/* Omap3 specific registers */
+#define OMAP3430ES2_PM_WKEN3 0x00f0
+#define OMAP3430ES2_PM_WKST3 0x00b8
+
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
@@ -153,16 +166,6 @@
#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
-/* Architecture-specific registers */
-
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-
#ifndef __ASSEMBLER__
/* Power/reset management domain register get/set */
@@ -228,7 +231,6 @@
#define OMAP_RSTTIME1_SHIFT 0
#define OMAP_RSTTIME1_MASK (0xff << 0)
-
/* PRM_RSTCTRL */
/* Named RM_RSTCTRL_WKUP on the 24xx */
/* 2420 calls RST_DPLL3 'RST_DPLL' */
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
new file mode 100644
index 0000000..2a30060
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -0,0 +1,93 @@
+/*
+ * SMS/SDRC (SDRAM controller) common code for OMAP2/3
+ *
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
+ *
+ * Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+
+#include "prm.h"
+
+#include <mach/sdrc.h>
+#include "sdrc.h"
+
+static struct omap_sdrc_params *sdrc_init_params;
+
+void __iomem *omap2_sdrc_base;
+void __iomem *omap2_sms_base;
+
+
+/**
+ * omap2_sdrc_get_params - return SDRC register values for a given clock rate
+ * @r: SDRC clock rate (in Hz)
+ *
+ * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
+ * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
+ * SDRC clock rate 'r'. These parameters control various timing
+ * delays in the SDRAM controller that are expressed in terms of the
+ * number of SDRC clock cycles to wait; hence the clock rate
+ * dependency. Note that sdrc_init_params must be sorted rate
+ * descending. Also assumes that both chip-selects use the same
+ * timing parameters. Returns a struct omap_sdrc_params * upon
+ * success, or NULL upon failure.
+ */
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+{
+ struct omap_sdrc_params *sp;
+
+ sp = sdrc_init_params;
+
+ while (sp->rate != r)
+ sp++;
+
+ if (!sp->rate)
+ return NULL;
+
+ return sp;
+}
+
+
+void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{
+ omap2_sdrc_base = omap2_globals->sdrc;
+ omap2_sms_base = omap2_globals->sms;
+}
+
+/* turn on smart idle modes for SDRAM scheduler and controller */
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+{
+ u32 l;
+
+ l = sms_read_reg(SMS_SYSCONFIG);
+ l &= ~(0x3 << 3);
+ l |= (0x2 << 3);
+ sms_write_reg(l, SMS_SYSCONFIG);
+
+ l = sdrc_read_reg(SDRC_SYSCONFIG);
+ l &= ~(0x3 << 3);
+ l |= (0x2 << 3);
+ sdrc_write_reg(l, SDRC_SYSCONFIG);
+
+ sdrc_init_params = sp;
+}
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/sdrc2xxx.c
similarity index 67%
rename from arch/arm/mach-omap2/memory.c
rename to arch/arm/mach-omap2/sdrc2xxx.c
index 882c702..0afdad5 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -1,13 +1,14 @@
/*
- * linux/arch/arm/mach-omap2/memory.c
+ * linux/arch/arm/mach-omap2/sdrc2xxx.c
*
- * Memory timing related functions for OMAP24XX
+ * SDRAM timing related functions for OMAP2xxx
*
- * Copyright (C) 2005 Texas Instruments Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (C) 2005, 2008 Texas Instruments Inc.
+ * Copyright (C) 2005, 2008 Nokia Corporation
*
- * Copyright (C) 2005 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
+ * Paul Walmsley
+ * Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -28,27 +29,31 @@
#include <mach/sram.h>
#include "prm.h"
-
-#include "memory.h"
+#include "clock.h"
+#include <mach/sdrc.h>
#include "sdrc.h"
-void __iomem *omap2_sdrc_base;
-void __iomem *omap2_sms_base;
+/* Memory timing, DLL mode flags */
+#define M_DDR 1
+#define M_LOCK_CTRL (1 << 2)
+#define M_UNLOCK 0
+#define M_LOCK 1
+
static struct memory_timings mem_timings;
static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
-u32 omap2_memory_get_slow_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
{
return mem_timings.slow_dll_ctrl;
}
-u32 omap2_memory_get_fast_dll_ctrl(void)
+static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
{
return mem_timings.fast_dll_ctrl;
}
-u32 omap2_memory_get_type(void)
+static u32 omap2xxx_sdrc_get_type(void)
{
return mem_timings.m_type;
}
@@ -57,7 +62,7 @@
* Check the DLL lock state, and return tue if running in unlock mode.
* This is needed to compensate for the shifted DLL value in unlock mode.
*/
-u32 omap2_dll_force_needed(void)
+u32 omap2xxx_sdrc_dll_is_unlocked(void)
{
/* dlla and dllb are a set */
u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
@@ -72,8 +77,10 @@
* 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
* Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
* CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ *
+ * Used by the clock framework during CORE DPLL changes
*/
-u32 omap2_reprogram_sdrc(u32 level, u32 force)
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
{
u32 dll_ctrl, m_type;
u32 prev = curr_perf_level;
@@ -82,15 +89,14 @@
if ((curr_perf_level == level) && !force)
return prev;
- if (level == CORE_CLK_SRC_DPLL) {
- dll_ctrl = omap2_memory_get_slow_dll_ctrl();
- } else if (level == CORE_CLK_SRC_DPLL_X2) {
- dll_ctrl = omap2_memory_get_fast_dll_ctrl();
- } else {
+ if (level == CORE_CLK_SRC_DPLL)
+ dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
+ else if (level == CORE_CLK_SRC_DPLL_X2)
+ dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
+ else
return prev;
- }
- m_type = omap2_memory_get_type();
+ m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
@@ -101,23 +107,14 @@
return prev;
}
-#if !defined(CONFIG_ARCH_OMAP2)
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock)
-{
-}
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type)
-{
-}
-#endif
-
-void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
+/* Used by the clock framework during CORE DPLL changes */
+void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
- mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+ /* DDR = 1, SDR = 0 */
+ mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
@@ -164,28 +161,3 @@
/* 90 degree phase for anything below 133Mhz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}
-
-void __init omap2_set_globals_memory(struct omap_globals *omap2_globals)
-{
- omap2_sdrc_base = omap2_globals->sdrc;
- omap2_sms_base = omap2_globals->sms;
-}
-
-/* turn on smart idle modes for SDRAM scheduler and controller */
-void __init omap2_init_memory(void)
-{
- u32 l;
-
- if (!cpu_is_omap2420())
- return;
-
- l = sms_read_reg(SMS_SYSCONFIG);
- l &= ~(0x3 << 3);
- l |= (0x2 << 3);
- sms_write_reg(l, SMS_SYSCONFIG);
-
- l = sdrc_read_reg(SDRC_SYSCONFIG);
- l &= ~(0x3 << 3);
- l |= (0x2 << 3);
- sdrc_write_reg(l, SDRC_SYSCONFIG);
-}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
new file mode 100644
index 0000000..fc74e91
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -0,0 +1,187 @@
+/*
+ * linux/arch/arm/mach-omap2/usb-musb.c
+ *
+ * This file will contain the board specific details for the
+ * MENTOR USB OTG controller on OMAP3430
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Vikram Pandita
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <linux/usb/musb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+
+static struct resource musb_resources[] = {
+ [0] = { /* start and end set dynamically */
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* general IRQ */
+ .start = INT_243X_HS_USB_MC,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* DMA IRQ */
+ .start = INT_243X_HS_USB_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int clk_on;
+
+static int musb_set_clock(struct clk *clk, int state)
+{
+ if (state) {
+ if (clk_on > 0)
+ return -ENODEV;
+
+ clk_enable(clk);
+ clk_on = 1;
+ } else {
+ if (clk_on == 0)
+ return -ENODEV;
+
+ clk_disable(clk);
+ clk_on = 0;
+ }
+
+ return 0;
+}
+
+static struct musb_hdrc_eps_bits musb_eps[] = {
+ { "ep1_tx", 10, },
+ { "ep1_rx", 10, },
+ { "ep2_tx", 9, },
+ { "ep2_rx", 9, },
+ { "ep3_tx", 3, },
+ { "ep3_rx", 3, },
+ { "ep4_tx", 3, },
+ { "ep4_rx", 3, },
+ { "ep5_tx", 3, },
+ { "ep5_rx", 3, },
+ { "ep6_tx", 3, },
+ { "ep6_rx", 3, },
+ { "ep7_tx", 3, },
+ { "ep7_rx", 3, },
+ { "ep8_tx", 2, },
+ { "ep8_rx", 2, },
+ { "ep9_tx", 2, },
+ { "ep9_rx", 2, },
+ { "ep10_tx", 2, },
+ { "ep10_rx", 2, },
+ { "ep11_tx", 2, },
+ { "ep11_rx", 2, },
+ { "ep12_tx", 2, },
+ { "ep12_rx", 2, },
+ { "ep13_tx", 2, },
+ { "ep13_rx", 2, },
+ { "ep14_tx", 2, },
+ { "ep14_rx", 2, },
+ { "ep15_tx", 2, },
+ { "ep15_rx", 2, },
+};
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .soft_con = 1,
+ .dma = 1,
+ .num_eps = 16,
+ .dma_channels = 7,
+ .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
+ .ram_bits = 12,
+ .eps_bits = musb_eps,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#ifdef CONFIG_USB_MUSB_OTG
+ .mode = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+ .mode = MUSB_PERIPHERAL,
+#endif
+ /* .clock is set dynamically */
+ .set_clock = musb_set_clock,
+ .config = &musb_config,
+
+ /* REVISIT charge pump on TWL4030 can supply up to
+ * 100 mA ... but this value is board-specific, like
+ * "mode", and should be passed to usb_musb_init().
+ */
+ .power = 50, /* up to 100 mA */
+};
+
+static u64 musb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device musb_device = {
+ .name = "musb_hdrc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &musb_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &musb_plat,
+ },
+ .num_resources = ARRAY_SIZE(musb_resources),
+ .resource = musb_resources,
+};
+
+#ifdef CONFIG_NOP_USB_XCEIV
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+ .name = "nop_usb_xceiv",
+ .id = -1,
+ .dev = {
+ .dma_mask = &nop_xceiv_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = NULL,
+ },
+};
+#endif
+
+void __init usb_musb_init(void)
+{
+ if (cpu_is_omap243x())
+ musb_resources[0].start = OMAP243X_HS_BASE;
+ else
+ musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
+ musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+
+ /*
+ * REVISIT: This line can be removed once all the platforms using
+ * musb_core.c have been converted to use use clkdev.
+ */
+ musb_plat.clock = "ick";
+
+#ifdef CONFIG_NOP_USB_XCEIV
+ if (platform_device_register(&nop_xceiv_device) < 0) {
+ printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
+ return;
+ }
+#endif
+
+ if (platform_device_register(&musb_device) < 0) {
+ printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+ return;
+ }
+}
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index f59a8d0..2c7035d 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -71,6 +71,7 @@
config MACH_TS78XX
bool "Technologic Systems TS-78xx"
+ select PM
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-78xx platform.
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0a62337..8a0e49d 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -431,6 +431,10 @@
/*****************************************************************************
* XOR engine
****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+};
+
static struct resource orion5x_xor_shared_resources[] = {
{
.name = "xor low",
@@ -448,6 +452,9 @@
static struct platform_device orion5x_xor_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
+ .dev = {
+ .platform_data = &orion5x_xor_shared_data,
+ },
.num_resources = ARRAY_SIZE(orion5x_xor_shared_resources),
.resource = orion5x_xor_shared_resources,
};
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 0722d65..b31ca4c 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -76,7 +76,7 @@
static int __init dns323_pci_init(void)
{
- /* The 5182 doesn't really use it's PCI bus, and initialising PCI
+ /* The 5182 doesn't really use its PCI bus, and initialising PCI
* gets in the way of initialising the SATA controller.
*/
if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
@@ -418,7 +418,7 @@
orion5x_i2c_init();
orion5x_uart0_init();
- /* The 5182 has it's SATA controller on-chip, and needs it's own little
+ /* The 5182 has its SATA controller on-chip, and needs its own little
* init routine.
*/
if (dns323_dev_id() == MV88F5182_DEV_ID)
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 08e4307..9b8db1d 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -19,7 +19,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable and issue soft reset
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index e0c43b8..c9bf6b8 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -186,7 +186,7 @@
static void lsmini_power_off(void)
{
- arch_reset(0);
+ arch_reset(0, NULL);
}
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
new file mode 100644
index 0000000..0f9cdf4
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -0,0 +1,35 @@
+#define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
+
+/*
+ * get yer id's from http://ts78xx.digriz.org.uk/
+ * do *not* make up your own or 'borrow' any!
+ */
+enum fpga_ids {
+ /* Technologic Systems */
+ TS7800_REV_1 = FPGAID(0x00b480, 0x01),
+ TS7800_REV_2 = FPGAID(0x00b480, 0x02),
+ TS7800_REV_3 = FPGAID(0x00b480, 0x03),
+ TS7800_REV_4 = FPGAID(0x00b480, 0x04),
+ TS7800_REV_5 = FPGAID(0x00b480, 0x05),
+
+ /* Unaffordable & Expensive */
+ UAE_DUMMY = FPGAID(0xffffff, 0x01),
+};
+
+struct fpga_device {
+ unsigned present:1;
+ unsigned init:1;
+};
+
+struct fpga_devices {
+ /* Technologic Systems */
+ struct fpga_device ts_rtc;
+ struct fpga_device ts_nand;
+};
+
+struct ts78xx_fpga_data {
+ unsigned int id;
+ int state;
+
+ struct fpga_devices supports;
+};
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 1368e9f..9a6b397 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -10,17 +10,20 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/sysfs.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/m48t86.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
+#include "ts78xx-fpga.h"
/*****************************************************************************
* TS-78xx Info
@@ -33,18 +36,11 @@
#define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000
#define TS78XX_FPGA_REGS_SIZE SZ_1M
-#define TS78XX_FPGA_REGS_SYSCON_ID (TS78XX_FPGA_REGS_VIRT_BASE | 0x000)
-#define TS78XX_FPGA_REGS_SYSCON_LCDI (TS78XX_FPGA_REGS_VIRT_BASE | 0x004)
-#define TS78XX_FPGA_REGS_SYSCON_LCDO (TS78XX_FPGA_REGS_VIRT_BASE | 0x008)
-
-#define TS78XX_FPGA_REGS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-#define TS78XX_FPGA_REGS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
-
-/*
- * 512kB NOR flash Device
- */
-#define TS78XX_NOR_BOOT_BASE 0xff800000
-#define TS78XX_NOR_BOOT_SIZE SZ_512K
+static struct ts78xx_fpga_data ts78xx_fpga = {
+ .id = 0,
+ .state = 1,
+/* .supports = ... - populated by ts78xx_fpga_supports() */
+};
/*****************************************************************************
* I/O Address Mapping
@@ -65,41 +61,6 @@
}
/*****************************************************************************
- * 512kB NOR Boot Flash - the chip is a M25P40
- ****************************************************************************/
-static struct mtd_partition ts78xx_nor_boot_flash_resources[] = {
- {
- .name = "ts-bootrom",
- .offset = 0,
- /* only the first 256kB is used */
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data ts78xx_nor_boot_flash_data = {
- .width = 1,
- .parts = ts78xx_nor_boot_flash_resources,
- .nr_parts = ARRAY_SIZE(ts78xx_nor_boot_flash_resources),
-};
-
-static struct resource ts78xx_nor_boot_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = TS78XX_NOR_BOOT_BASE,
- .end = TS78XX_NOR_BOOT_BASE + TS78XX_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ts78xx_nor_boot_flash = {
- .name = "physmap-flash",
- .id = -1,
- .dev = {
- .platform_data = &ts78xx_nor_boot_flash_data,
- },
- .num_resources = 1,
- .resource = &ts78xx_nor_boot_flash_resource,
-};
-
-/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data ts78xx_eth_data = {
@@ -107,31 +68,40 @@
};
/*****************************************************************************
- * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
+ * SATA
****************************************************************************/
-#ifdef CONFIG_RTC_DRV_M48T86
-static unsigned char ts78xx_rtc_readbyte(unsigned long addr)
-{
- writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
- return readb(TS78XX_FPGA_REGS_RTC_DATA);
-}
-
-static void ts78xx_rtc_writebyte(unsigned char value, unsigned long addr)
-{
- writeb(addr, TS78XX_FPGA_REGS_RTC_CTRL);
- writeb(value, TS78XX_FPGA_REGS_RTC_DATA);
-}
-
-static struct m48t86_ops ts78xx_rtc_ops = {
- .readbyte = ts78xx_rtc_readbyte,
- .writebyte = ts78xx_rtc_writebyte,
+static struct mv_sata_platform_data ts78xx_sata_data = {
+ .n_ports = 2,
};
-static struct platform_device ts78xx_rtc_device = {
+/*****************************************************************************
+ * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
+ ****************************************************************************/
+#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
+#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
+
+static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
+{
+ writeb(addr, TS_RTC_CTRL);
+ return readb(TS_RTC_DATA);
+}
+
+static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
+{
+ writeb(addr, TS_RTC_CTRL);
+ writeb(value, TS_RTC_DATA);
+}
+
+static struct m48t86_ops ts78xx_ts_rtc_ops = {
+ .readbyte = ts78xx_ts_rtc_readbyte,
+ .writebyte = ts78xx_ts_rtc_writebyte,
+};
+
+static struct platform_device ts78xx_ts_rtc_device = {
.name = "rtc-m48t86",
.id = -1,
.dev = {
- .platform_data = &ts78xx_rtc_ops,
+ .platform_data = &ts78xx_ts_rtc_ops,
},
.num_resources = 0,
};
@@ -146,58 +116,313 @@
* TODO: track down a guinea pig without an RTC to see if we can work out a
* better RTC detection routine
*/
-static int __init ts78xx_rtc_init(void)
+static int ts78xx_ts_rtc_load(void)
{
+ int rc;
unsigned char tmp_rtc0, tmp_rtc1;
- tmp_rtc0 = ts78xx_rtc_readbyte(126);
- tmp_rtc1 = ts78xx_rtc_readbyte(127);
+ tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
+ tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
- ts78xx_rtc_writebyte(0x00, 126);
- ts78xx_rtc_writebyte(0x55, 127);
- if (ts78xx_rtc_readbyte(127) == 0x55) {
- ts78xx_rtc_writebyte(0xaa, 127);
- if (ts78xx_rtc_readbyte(127) == 0xaa
- && ts78xx_rtc_readbyte(126) == 0x00) {
- ts78xx_rtc_writebyte(tmp_rtc0, 126);
- ts78xx_rtc_writebyte(tmp_rtc1, 127);
- platform_device_register(&ts78xx_rtc_device);
- return 1;
+ ts78xx_ts_rtc_writebyte(0x00, 126);
+ ts78xx_ts_rtc_writebyte(0x55, 127);
+ if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
+ ts78xx_ts_rtc_writebyte(0xaa, 127);
+ if (ts78xx_ts_rtc_readbyte(127) == 0xaa
+ && ts78xx_ts_rtc_readbyte(126) == 0x00) {
+ ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
+ ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
+
+ if (ts78xx_fpga.supports.ts_rtc.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_rtc_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_rtc.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_rtc_device);
+
+ return rc;
}
}
+ return -ENODEV;
+};
+
+static void ts78xx_ts_rtc_unload(void)
+{
+ platform_device_del(&ts78xx_ts_rtc_device);
+}
+
+/*****************************************************************************
+ * NAND Flash
+ ****************************************************************************/
+#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x800) /* VIRT */
+#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x804) /* PHYS */
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 0
+ */
+static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits;
+
+ bits = (ctrl & NAND_NCE) << 2;
+ bits |= ctrl & NAND_CLE;
+ bits |= (ctrl & NAND_ALE) >> 2;
+
+ writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
+{
+ return readb(TS_NAND_CTRL) & 0x20;
+}
+
+const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ts78xx_ts_nand_parts[] = {
+ {
+ .name = "mbr",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ }, {
+ .name = "initrd",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_nand_data ts78xx_ts_nand_data = {
+ .chip = {
+ .part_probe_types = ts_nand_part_probes,
+ .partitions = ts78xx_ts_nand_parts,
+ .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
+ .chip_delay = 15,
+ .options = NAND_USE_FLASH_BBT,
+ },
+ .ctrl = {
+ /*
+ * The HW ECC offloading functions, used to give about a 9%
+ * performance increase for 'dd if=/dev/mtdblockX' and 5% for
+ * nanddump. This all however was changed by git commit
+ * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
+ * no performance advantage to be had so we no longer bother
+ */
+ .cmd_ctrl = ts78xx_ts_nand_cmd_ctrl,
+ .dev_ready = ts78xx_ts_nand_dev_ready,
+ },
+};
+
+static struct resource ts78xx_ts_nand_resources = {
+ .start = TS_NAND_DATA,
+ .end = TS_NAND_DATA + 4,
+ .flags = IORESOURCE_IO,
+};
+
+static struct platform_device ts78xx_ts_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts78xx_ts_nand_data,
+ },
+ .resource = &ts78xx_ts_nand_resources,
+ .num_resources = 1,
+};
+
+static int ts78xx_ts_nand_load(void)
+{
+ int rc;
+
+ if (ts78xx_fpga.supports.ts_nand.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_nand_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_nand.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_nand_device);
+
+ return rc;
+};
+
+static void ts78xx_ts_nand_unload(void)
+{
+ platform_device_del(&ts78xx_ts_nand_device);
+}
+
+/*****************************************************************************
+ * FPGA 'hotplug' support code
+ ****************************************************************************/
+static void ts78xx_fpga_devices_zero_init(void)
+{
+ ts78xx_fpga.supports.ts_rtc.init = 0;
+ ts78xx_fpga.supports.ts_nand.init = 0;
+}
+
+static void ts78xx_fpga_supports(void)
+{
+ /* TODO: put this 'table' into ts78xx-fpga.h */
+ switch (ts78xx_fpga.id) {
+ case TS7800_REV_1:
+ case TS7800_REV_2:
+ case TS7800_REV_3:
+ case TS7800_REV_4:
+ case TS7800_REV_5:
+ ts78xx_fpga.supports.ts_rtc.present = 1;
+ ts78xx_fpga.supports.ts_nand.present = 1;
+ break;
+ default:
+ ts78xx_fpga.supports.ts_rtc.present = 0;
+ ts78xx_fpga.supports.ts_nand.present = 0;
+ }
+}
+
+static int ts78xx_fpga_load_devices(void)
+{
+ int tmp, ret = 0;
+
+ if (ts78xx_fpga.supports.ts_rtc.present == 1) {
+ tmp = ts78xx_ts_rtc_load();
+ if (tmp) {
+ printk(KERN_INFO "TS-78xx: RTC not registered\n");
+ ts78xx_fpga.supports.ts_rtc.present = 0;
+ }
+ ret |= tmp;
+ }
+ if (ts78xx_fpga.supports.ts_nand.present == 1) {
+ tmp = ts78xx_ts_nand_load();
+ if (tmp) {
+ printk(KERN_INFO "TS-78xx: NAND not registered\n");
+ ts78xx_fpga.supports.ts_nand.present = 0;
+ }
+ ret |= tmp;
+ }
+
+ return ret;
+}
+
+static int ts78xx_fpga_unload_devices(void)
+{
+ int ret = 0;
+
+ if (ts78xx_fpga.supports.ts_rtc.present == 1)
+ ts78xx_ts_rtc_unload();
+ if (ts78xx_fpga.supports.ts_nand.present == 1)
+ ts78xx_ts_nand_unload();
+
+ return ret;
+}
+
+static int ts78xx_fpga_load(void)
+{
+ ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+ printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+ (ts78xx_fpga.id >> 8) & 0xffffff,
+ ts78xx_fpga.id & 0xff);
+
+ ts78xx_fpga_supports();
+
+ if (ts78xx_fpga_load_devices()) {
+ ts78xx_fpga.state = -1;
+ return -EBUSY;
+ }
+
return 0;
};
-#else
-static int __init ts78xx_rtc_init(void)
+
+static int ts78xx_fpga_unload(void)
{
+ unsigned int fpga_id;
+
+ fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+ /*
+ * There does not seem to be a feasible way to block access to the GPIO
+ * pins from userspace (/dev/mem). This if clause should hopefully warn
+ * those foolish enough not to follow 'policy' :)
+ *
+ * UrJTAG SVN since r1381 can be used to reprogram the FPGA
+ */
+ if (ts78xx_fpga.id != fpga_id) {
+ printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
+ "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
+ (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
+ (fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
+ ts78xx_fpga.state = -1;
+ return -EBUSY;
+ }
+
+ if (ts78xx_fpga_unload_devices()) {
+ ts78xx_fpga.state = -1;
+ return -EBUSY;
+ }
+
return 0;
-}
-#endif
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data ts78xx_sata_data = {
- .n_ports = 2,
};
-/*****************************************************************************
- * print some information regarding the board
- ****************************************************************************/
-static void __init ts78xx_print_board_id(void)
+static ssize_t ts78xx_fpga_show(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
{
- unsigned int board_info;
+ if (ts78xx_fpga.state < 0)
+ return sprintf(buf, "borked\n");
- board_info = readl(TS78XX_FPGA_REGS_SYSCON_ID);
- printk(KERN_INFO "TS-78xx Info: FPGA rev=%.2x, Board Magic=%.6x, ",
- board_info & 0xff,
- (board_info >> 8) & 0xffffff);
- board_info = readl(TS78XX_FPGA_REGS_SYSCON_LCDI);
- printk("JP1=%d, JP2=%d\n",
- (board_info >> 30) & 0x1,
- (board_info >> 31) & 0x1);
-};
+ return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
+}
+
+static ssize_t ts78xx_fpga_store(struct kobject *kobj,
+ struct kobj_attribute *attr, const char *buf, size_t n)
+{
+ int value, ret;
+
+ if (ts78xx_fpga.state < 0) {
+ printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
+ return -EBUSY;
+ }
+
+ if (strncmp(buf, "online", sizeof("online") - 1) == 0)
+ value = 1;
+ else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+ value = 0;
+ else {
+ printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
+ return -EINVAL;
+ }
+
+ if (ts78xx_fpga.state == value)
+ return n;
+
+ ret = (ts78xx_fpga.state == 0)
+ ? ts78xx_fpga_load()
+ : ts78xx_fpga_unload();
+
+ if (!(ret < 0))
+ ts78xx_fpga.state = value;
+
+ return n;
+}
+
+static struct kobj_attribute ts78xx_fpga_attr =
+ __ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
/*****************************************************************************
* General Setup
@@ -223,20 +448,6 @@
{ 17, MPP_UART },
{ 18, MPP_UART },
{ 19, MPP_UART },
- { -1 },
-};
-
-static void __init ts78xx_init(void)
-{
- /*
- * Setup basic Orion functions. Need to be called early.
- */
- orion5x_init();
-
- ts78xx_print_board_id();
-
- orion5x_mpp_conf(ts78xx_mpp_modes);
-
/*
* MPP[20] PCI Clock Out 1
* MPP[21] PCI Clock Out 0
@@ -245,6 +456,19 @@
* MPP[24] Unused
* MPP[25] Unused
*/
+ { -1 },
+};
+
+static void __init ts78xx_init(void)
+{
+ int ret;
+
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(ts78xx_mpp_modes);
/*
* Configure peripherals.
@@ -257,12 +481,12 @@
orion5x_uart1_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
- TS78XX_NOR_BOOT_SIZE);
- platform_device_register(&ts78xx_nor_boot_flash);
-
- if (!ts78xx_rtc_init())
- printk(KERN_INFO "TS-78xx RTC not detected or enabled\n");
+ /* FPGA init */
+ ts78xx_fpga_devices_zero_init();
+ ret = ts78xx_fpga_load();
+ ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
+ if (ret)
+ printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index e12e7ab..5dda2bb 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -30,7 +30,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8eea730..96a2006 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -40,6 +40,9 @@
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
+config GUMSTIX_AM300EPD
+ bool "Enable AM300EPD board support"
+
endchoice
config MACH_INTELMOTE2
@@ -254,10 +257,24 @@
bool "CompuLab EM-x270 platform"
select PXA27x
-config MACH_COLIBRI
- bool "Toradex Colibri PX27x"
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
select PXA27x
+config MACH_COLIBRI
+ bool "Toradex Colibri PXA270"
+ select PXA27x
+
+config MACH_COLIBRI300
+ bool "Toradex Colibri PXA300/310"
+ select PXA3xx
+ select CPU_PXA300
+
+config MACH_COLIBRI320
+ bool "Toradex Colibri PXA320"
+ select PXA3xx
+ select CPU_PXA320
+
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
@@ -295,8 +312,15 @@
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
@@ -319,6 +343,16 @@
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
+
config MACH_PALMTX
bool "Palm T|X"
default y
@@ -339,6 +373,16 @@
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
@@ -359,6 +403,18 @@
endchoice
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable supprot for CSB701 baseboard"
+ depends on MACH_CSB726
+
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 7b28bb5..c80e1ba 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,8 +3,8 @@
#
# Common support (must be linked before board specific support)
-obj-y += clock.o devices.o generic.o irq.o dma.o \
- time.o gpio.o reset.o
+obj-y += clock.o devices.o generic.o irq.o \
+ time.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
ifeq ($(CONFIG_CPU_FREQ),y)
@@ -28,13 +28,16 @@
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
-obj-$(CONFIG_MACH_COLIBRI) += colibri.o
+obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
+obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
@@ -45,6 +48,7 @@
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
@@ -53,7 +57,9 @@
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
+obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
@@ -71,6 +77,8 @@
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_CSB726) += csb726.o
+obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights
led-y := leds.o
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 77ee80e..3499fad 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,8 @@
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <mach/pxa25x.h>
#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
new file mode 100644
index 0000000..4bd10a1
--- /dev/null
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -0,0 +1,295 @@
+/*
+ * am300epd.c -- Platform device for AM300 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+
+#include <video/broadsheetfb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am300_device;
+static struct broadsheet_board am300_board;
+
+static unsigned long am300_pin_config[] __initdata = {
+ GPIO16_GPIO,
+ GPIO17_GPIO,
+ GPIO32_GPIO,
+ GPIO48_GPIO,
+ GPIO49_GPIO,
+ GPIO51_GPIO,
+ GPIO74_GPIO,
+ GPIO75_GPIO,
+ GPIO76_GPIO,
+ GPIO77_GPIO,
+
+ /* this is the 16-bit hdb bus 58-73 */
+ GPIO58_GPIO,
+ GPIO59_GPIO,
+ GPIO60_GPIO,
+ GPIO61_GPIO,
+
+ GPIO62_GPIO,
+ GPIO63_GPIO,
+ GPIO64_GPIO,
+ GPIO65_GPIO,
+
+ GPIO66_GPIO,
+ GPIO67_GPIO,
+ GPIO68_GPIO,
+ GPIO69_GPIO,
+
+ GPIO70_GPIO,
+ GPIO71_GPIO,
+ GPIO72_GPIO,
+ GPIO73_GPIO,
+};
+
+/* register offsets for gpio control */
+#define PWR_GPIO_PIN 16
+#define CFG_GPIO_PIN 17
+#define RDY_GPIO_PIN 32
+#define DC_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define LED_GPIO_PIN 51
+#define RD_GPIO_PIN 74
+#define WR_GPIO_PIN 75
+#define CS_GPIO_PIN 76
+#define IRQ_GPIO_PIN 77
+
+/* hdb bus */
+#define DB0_GPIO_PIN 58
+#define DB15_GPIO_PIN 73
+
+static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
+ RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
+ IRQ_GPIO_PIN, LED_GPIO_PIN };
+static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
+ "CS", "IRQ", "LED" };
+
+static int am300_wait_event(struct broadsheetfb_par *par)
+{
+ /* todo: improve err recovery */
+ wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
+ return 0;
+}
+
+static int am300_init_gpio_regs(struct broadsheetfb_par *par)
+{
+ int i;
+ int err;
+ char dbname[8];
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ /* we also need to take care of the hdb bus */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
+ sprintf(dbname, "DB%d", i);
+ err = gpio_request(i, dbname);
+ if (err) {
+ dev_err(&am300_device->dev, "failed requesting "
+ "gpio %d, err=%d\n", i, err);
+ while (i >= DB0_GPIO_PIN)
+ gpio_free(i--);
+ i = ARRAY_SIZE(gpios) - 1;
+ goto err_req_gpio;
+ }
+ }
+
+ /* setup the outputs and init values */
+ gpio_direction_output(PWR_GPIO_PIN, 0);
+ gpio_direction_output(CFG_GPIO_PIN, 1);
+ gpio_direction_output(DC_GPIO_PIN, 0);
+ gpio_direction_output(RD_GPIO_PIN, 1);
+ gpio_direction_output(WR_GPIO_PIN, 1);
+ gpio_direction_output(CS_GPIO_PIN, 1);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ /* setup the inputs */
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(IRQ_GPIO_PIN);
+
+ /* start the hdb bus as an input */
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_direction_output(i, 0);
+
+ /* go into command mode */
+ gpio_set_value(CFG_GPIO_PIN, 1);
+ gpio_set_value(RST_GPIO_PIN, 0);
+ msleep(10);
+ gpio_set_value(RST_GPIO_PIN, 1);
+ msleep(10);
+ am300_wait_event(par);
+
+ return 0;
+
+err_req_gpio:
+ while (i > 0)
+ gpio_free(gpios[i--]);
+
+ return err;
+}
+
+static int am300_init_board(struct broadsheetfb_par *par)
+{
+ return am300_init_gpio_regs(par);
+}
+
+static void am300_cleanup(struct broadsheetfb_par *par)
+{
+ int i;
+
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+
+ for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
+ gpio_free(i);
+
+}
+
+static u16 am300_get_hdb(struct broadsheetfb_par *par)
+{
+ u16 res = 0;
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
+
+ return res;
+}
+
+static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
+{
+ int i;
+
+ for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
+ gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+}
+
+
+static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
+ u8 state)
+{
+ switch (bit) {
+ case BS_CS:
+ gpio_set_value(CS_GPIO_PIN, state);
+ break;
+ case BS_DC:
+ gpio_set_value(DC_GPIO_PIN, state);
+ break;
+ case BS_WR:
+ gpio_set_value(WR_GPIO_PIN, state);
+ break;
+ }
+}
+
+static int am300_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am300_handle_irq(int irq, void *dev_id)
+{
+ struct broadsheetfb_par *par = dev_id;
+
+ wake_up(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am300_setup_irq(struct fb_info *info)
+{
+ int ret;
+ struct broadsheetfb_par *par = info->par;
+
+ ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+ IRQF_DISABLED|IRQF_TRIGGER_RISING,
+ "AM300", par);
+ if (ret)
+ dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static struct broadsheet_board am300_board = {
+ .owner = THIS_MODULE,
+ .init = am300_init_board,
+ .cleanup = am300_cleanup,
+ .set_hdb = am300_set_hdb,
+ .get_hdb = am300_get_hdb,
+ .set_ctl = am300_set_ctl,
+ .wait_for_rdy = am300_wait_event,
+ .get_panel_type = am300_get_panel_type,
+ .setup_irq = am300_setup_irq,
+};
+
+int __init am300_init(void)
+{
+ int ret;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
+
+ /* request our platform independent driver */
+ request_module("broadsheetfb");
+
+ am300_device = platform_device_alloc("broadsheetfb", -1);
+ if (!am300_device)
+ return -ENOMEM;
+
+ /* the am300_board that will be seen by broadsheetfb is a copy */
+ platform_device_add_data(am300_device, &am300_board,
+ sizeof(am300_board));
+
+ ret = platform_device_add(am300_device);
+
+ if (ret) {
+ platform_device_put(am300_device);
+ return ret;
+ }
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+MODULE_DESCRIPTION("board driver for am300 epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 40b7740..db52d2c 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -87,7 +87,7 @@
clkdev_add(&clks[i]);
}
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
struct device *dev)
{
struct clk *r = clk_get(dev, id);
@@ -96,7 +96,7 @@
if (!r)
return -ENODEV;
- l = clkdev_alloc(r, alias, alias_dev ? dev_name(alias_dev) : NULL);
+ l = clkdev_alloc(r, alias, alias_dev_name);
clk_put(r);
if (!l)
return -ENODEV;
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 4e9c613..5599bce 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -69,6 +69,6 @@
#endif
void clks_register(struct clk_lookup *clks, size_t num);
-int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+int clk_add_alias(const char *alias, const char *alias_name, char *id,
struct device *dev);
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 83a4cdf..253fd76 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -22,10 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/pxa2xx_spi.h>
-#include <mach/bitfield.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index df83b97..34576ba 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -17,7 +17,7 @@
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 3156b25..7873fa3 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <asm/mach/pci.h>
-#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index d99fd9e..117b5435f 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,8 +22,6 @@
#include <asm/mach/map.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -96,7 +94,7 @@
};
static struct dm9000_plat_data cmx270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
+ .flags = DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device cmx2xx_dm9000_device = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index ff0c577..a9f48b1 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -28,9 +28,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa300.h>
-
-#include <mach/hardware.h>
+#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
@@ -162,7 +160,7 @@
};
static struct dm9000_plat_data cm_x300_dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
+ .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device dm9000_device = {
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri-pxa270.c
similarity index 67%
rename from arch/arm/mach-pxa/colibri.c
rename to arch/arm/mach-pxa/colibri-pxa270.c
index e847362..01bcfaa 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -1,7 +1,7 @@
/*
- * linux/arch/arm/mach-pxa/colibri.c
+ * linux/arch/arm/mach-pxa/colibri-pxa270.c
*
- * Support for Toradex PXA27x based Colibri module
+ * Support for Toradex PXA270 based Colibri module
* Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
@@ -20,6 +20,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -28,20 +29,23 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
#include <mach/colibri.h>
#include "generic.h"
#include "devices.h"
-static unsigned long colibri_pin_config[] __initdata = {
+/*
+ * GPIO configuration
+ */
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
GPIO78_nCS_2, /* Ethernet CS */
GPIO114_GPIO, /* Ethernet IRQ */
};
/*
- * Flash
+ * NOR flash
*/
static struct mtd_partition colibri_partitions[] = {
{
@@ -70,39 +74,40 @@
}
};
-static struct resource flash_resource = {
+static struct resource colibri_pxa270_flash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device flash_device = {
+static struct platform_device colibri_pxa270_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = colibri_flash_data,
},
- .resource = &flash_resource,
+ .resource = &colibri_pxa270_flash_resource,
.num_resources = 1,
};
/*
* DM9000 Ethernet
*/
+#if defined(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
- .start = COLIBRI_ETH_PHYS,
- .end = COLIBRI_ETH_PHYS + 3,
+ .start = COLIBRI_PXA270_ETH_PHYS,
+ .end = COLIBRI_PXA270_ETH_PHYS + 3,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = COLIBRI_ETH_PHYS + 4,
- .end = COLIBRI_ETH_PHYS + 4 + 500,
+ .start = COLIBRI_PXA270_ETH_PHYS + 4,
+ .end = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = COLIBRI_ETH_IRQ,
- .end = COLIBRI_ETH_IRQ,
+ .start = COLIBRI_PXA270_ETH_IRQ,
+ .end = COLIBRI_PXA270_ETH_IRQ,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@@ -113,25 +118,28 @@
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
};
+#endif /* CONFIG_DM9000 */
-static struct platform_device *colibri_devices[] __initdata = {
- &flash_device,
+static struct platform_device *colibri_pxa270_devices[] __initdata = {
+ &colibri_pxa270_flash_device,
+#if defined(CONFIG_DM9000)
&dm9000_device,
+#endif
};
-static void __init colibri_init(void)
+static void __init colibri_pxa270_init(void)
{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
-
- platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+ platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
}
-MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = COLIBRI_SDRAM_BASE + 0x100,
- .init_machine = colibri_init,
+ .init_machine = colibri_pxa270_init,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
new file mode 100644
index 0000000..169ab55
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-pxa/colibri-pxa300.c
+ *
+ * Support for Toradex PXA300/310 based Colibri module
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa300.h>
+#include <mach/colibri.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2
+};
+
+static struct resource colibri_asix_resource[] = {
+ [0] = {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device asix_device = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(colibri_asix_resource),
+ .resource = colibri_asix_resource,
+ .dev = {
+ .platform_data = &colibri_asix_platdata
+ }
+};
+
+static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
+ GPIO1_nCS2, /* AX88796 chip select */
+ GPIO26_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
+};
+
+static void __init colibri_pxa300_init_eth(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
+ set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+ platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa300_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa300_init_ohci(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
+ pxa_set_ohci_info(&colibri_pxa300_ohci_info);
+}
+#else
+static inline void colibri_pxa300_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
+ GPIO7_MMC1_CLK,
+ GPIO14_MMC1_CMD,
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO70_LCD_LDD_16,
+ GPIO71_LCD_LDD_17,
+ GPIO62_LCD_CS_N,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+ GPIO76_LCD_VSYNC,
+};
+
+static void __init colibri_pxa300_init_lcd(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
+}
+
+#else
+static inline void colibri_pxa300_init_lcd(void) {}
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
+ GPIO24_AC97_SYSCLK,
+ GPIO23_AC97_nACRESET,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+ GPIO29_AC97_BITCLK
+};
+
+static inline void __init colibri_pxa310_init_ac97(void)
+{
+ /* no AC97 codec on Colibri PXA300 */
+ if (!cpu_is_pxa310())
+ return;
+
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa310_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa300_init(void)
+{
+ colibri_pxa300_init_eth();
+ colibri_pxa300_init_ohci();
+ colibri_pxa300_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
+ colibri_pxa310_init_ac97();
+ colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
+ mfp_to_gpio(MFP_PIN_GPIO13));
+}
+
+MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .init_machine = colibri_pxa300_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
new file mode 100644
index 0000000..573a9a1
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -0,0 +1,187 @@
+/*
+ * arch/arm/mach-pxa/colibri-pxa320.c
+ *
+ * Support for Toradex PXA320/310 based Colibri module
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ * Matthias Meier <matthias.j.meier@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <net/ax88796.h>
+
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/colibri.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_AX88796)
+#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO36_GPIO)
+
+/*
+ * Asix AX88796 Ethernet
+ */
+static struct ax_plat_data colibri_asix_platdata = {
+ .flags = AXFLG_MAC_FROMDEV,
+ .wordlength = 2
+};
+
+static struct resource colibri_asix_resource[] = {
+ [0] = {
+ .start = PXA3xx_CS2_PHYS,
+ .end = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device asix_device = {
+ .name = "ax88796",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(colibri_asix_resource),
+ .resource = colibri_asix_resource,
+ .dev = {
+ .platform_data = &colibri_asix_platdata
+ }
+};
+
+static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
+ GPIO3_nCS2, /* AX88796 chip select */
+ GPIO36_GPIO | MFP_PULL_HIGH /* AX88796 IRQ */
+};
+
+static void __init colibri_pxa320_init_eth(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
+ set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
+ platform_device_register(&asix_device);
+}
+#else
+static inline void __init colibri_pxa320_init_eth(void) {}
+#endif /* CONFIG_AX88796 */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+};
+
+static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
+ .port_mode = PMM_GLOBAL_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+void __init colibri_pxa320_init_ohci(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
+ pxa_set_ohci_info(&colibri_pxa320_ohci_info);
+}
+#else
+static inline void colibri_pxa320_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
+static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3
+};
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
+ GPIO6_2_LCD_LDD_0,
+ GPIO7_2_LCD_LDD_1,
+ GPIO8_2_LCD_LDD_2,
+ GPIO9_2_LCD_LDD_3,
+ GPIO10_2_LCD_LDD_4,
+ GPIO11_2_LCD_LDD_5,
+ GPIO12_2_LCD_LDD_6,
+ GPIO13_2_LCD_LDD_7,
+ GPIO63_LCD_LDD_8,
+ GPIO64_LCD_LDD_9,
+ GPIO65_LCD_LDD_10,
+ GPIO66_LCD_LDD_11,
+ GPIO67_LCD_LDD_12,
+ GPIO68_LCD_LDD_13,
+ GPIO69_LCD_LDD_14,
+ GPIO70_LCD_LDD_15,
+ GPIO71_LCD_LDD_16,
+ GPIO72_LCD_LDD_17,
+ GPIO73_LCD_CS_N,
+ GPIO74_LCD_VSYNC,
+ GPIO14_2_LCD_FCLK,
+ GPIO15_2_LCD_LCLK,
+ GPIO16_2_LCD_PCLK,
+ GPIO17_2_LCD_BIAS,
+};
+
+static void __init colibri_pxa320_init_lcd(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
+}
+#else
+static inline void colibri_pxa320_init_lcd(void) {}
+#endif
+
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
+ GPIO34_AC97_SYSCLK,
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET
+};
+
+static inline void __init colibri_pxa320_init_ac97(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void colibri_pxa320_init_ac97(void) {}
+#endif
+
+void __init colibri_pxa320_init(void)
+{
+ colibri_pxa320_init_eth();
+ colibri_pxa320_init_ohci();
+ colibri_pxa320_init_lcd();
+ colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
+ colibri_pxa320_init_ac97();
+ colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
+ mfp_to_gpio(MFP_PIN_GPIO28));
+}
+
+MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .init_machine = colibri_pxa320_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
new file mode 100644
index 0000000..12d0afc
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-pxa/colibri-pxa3xx.c
+ *
+ * Common functions for all Toradex PXA3xx modules
+ *
+ * Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+
+#include "generic.h"
+#include "devices.h"
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int mmc_detect_pin;
+
+static int colibri_pxa3xx_mci_init(struct device *dev,
+ irq_handler_t colibri_mmc_detect_int,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(mmc_detect_pin, "mmc card detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(mmc_detect_pin);
+ ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (ret) {
+ gpio_free(mmc_detect_pin);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
+{
+ free_irq(mmc_detect_pin, data);
+ gpio_free(gpio_to_irq(mmc_detect_pin));
+}
+
+static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = colibri_pxa3xx_mci_init,
+ .exit = colibri_pxa3xx_mci_exit,
+};
+
+void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
+{
+ pxa3xx_mfp_config(pins, len);
+ mmc_detect_pin = detect_pin;
+ pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
+}
+#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static int lcd_bl_pin;
+
+/*
+ * LCD panel (Sharp LQ043T3DX02)
+ */
+static void colibri_lcd_backlight(int on)
+{
+ gpio_set_value(lcd_bl_pin, !!on);
+}
+
+static struct pxafb_mode_info sharp_lq43_mode = {
+ .pixclock = 101936,
+ .xres = 480,
+ .yres = 272,
+ .bpp = 32,
+ .depth = 18,
+ .hsync_len = 41,
+ .left_margin = 2,
+ .right_margin = 2,
+ .vsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lq43_info = {
+ .modes = &sharp_lq43_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lcd_conn = LCD_COLOR_TFT_18BPP,
+ .pxafb_backlight_power = colibri_lcd_backlight,
+};
+
+void __init colibri_pxa3xx_init_lcd(int bl_pin)
+{
+ lcd_bl_pin = bl_pin;
+ gpio_request(bl_pin, "lcd backlight");
+ gpio_direction_output(bl_pin, 0);
+ set_pxa_fb_info(&sharp_lq43_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index a8d91b6..cdf21dd 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -41,9 +41,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
@@ -637,16 +635,16 @@
/* Green LED off tells the bootloader to halt */
gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
- arm_machine_restart('h');
+ arm_machine_restart('h', NULL);
}
-static void corgi_restart(char mode)
+static void corgi_restart(char mode, const char *cmd)
{
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
- arm_machine_restart('h');
+ arm_machine_restart('h', cmd);
}
static void __init corgi_init(void)
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 411607b..d9b9631 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -22,7 +22,6 @@
#include <linux/string.h>
#include <mach/corgi.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e352590..7f04b3a 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -24,7 +24,6 @@
#include <mach/sharpsl.h>
#include <mach/corgi.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 8e2f221..a5ee707 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -20,7 +20,6 @@
#include <asm/mach-types.h>
#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/regs-ssp.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 771dd4e..083a1d8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -37,8 +37,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#ifdef DEBUG
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 968c830..67f34a8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -15,8 +15,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa3xx-regs.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
new file mode 100644
index 0000000..4a2a295
--- /dev/null
+++ b/arch/arm/mach-pxa/csb701.c
@@ -0,0 +1,61 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+static struct gpio_keys_button csb701_buttons[] = {
+ {
+ .code = 0x7,
+ .gpio = 1,
+ .active_low = 1,
+ .desc = "SW2",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data csb701_gpio_keys_data = {
+ .buttons = csb701_buttons,
+ .nbuttons = ARRAY_SIZE(csb701_buttons),
+};
+
+static struct gpio_led csb701_leds[] = {
+ {
+ .name = "csb701:yellow:heartbeat",
+ .default_trigger = "heartbeat",
+ .gpio = 11,
+ .active_low = 1,
+ },
+};
+
+static struct platform_device csb701_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev.platform_data = &csb701_gpio_keys_data,
+};
+
+static struct gpio_led_platform_data csb701_leds_gpio_data = {
+ .leds = csb701_leds,
+ .num_leds = ARRAY_SIZE(csb701_leds),
+};
+
+static struct platform_device csb701_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &csb701_leds_gpio_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &csb701_gpio_keys,
+ &csb701_leds_gpio,
+};
+
+static int __init csb701_init(void)
+{
+ return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+module_init(csb701_init);
+
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
new file mode 100644
index 0000000..2b289f8
--- /dev/null
+++ b/arch/arm/mach-pxa/csb726.c
@@ -0,0 +1,318 @@
+/*
+ * Support for Cogent CSB726
+ *
+ * Copyright (c) 2008 Dmitry Eremin-Solenikov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sm501.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/csb726.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
+ * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
+ * XXX: 21,
+ * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
+ * XXX: 33 CS_5 for LAN9215 on R1
+ */
+
+static unsigned long csb726_pin_config[] = {
+ GPIO78_nCS_2, /* EXP_CS */
+ GPIO79_nCS_3, /* SMSC9215 */
+ GPIO80_nCS_4, /* SM501 */
+
+ GPIO52_GPIO, /* #SMSC9251 int */
+ GPIO53_GPIO, /* SM501 int */
+
+ GPIO1_GPIO, /* GPIO0 */
+ GPIO11_GPIO, /* GPIO1 */
+ GPIO9_GPIO, /* GPIO2 */
+ GPIO10_GPIO, /* GPIO3 */
+ GPIO16_PWM0_OUT, /* or GPIO4 */
+ GPIO17_PWM1_OUT, /* or GPIO5 */
+ GPIO94_GPIO, /* GPIO6 */
+ GPIO95_GPIO, /* GPIO7 */
+ GPIO96_GPIO, /* GPIO8 */
+ GPIO97_GPIO, /* GPIO9 */
+ GPIO15_GPIO, /* EXP_IRQ */
+ GPIO18_RDY, /* EXP_WAIT */
+
+ GPIO0_GPIO, /* PWR_INT */
+ GPIO104_GPIO, /* PWR_OFF */
+
+ GPIO12_GPIO, /* touch irq */
+
+ GPIO13_SSP2_TXD,
+ GPIO14_SSP2_SFRM,
+ MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
+ GPIO22_SSP2_SCLK,
+
+ GPIO81_SSP3_TXD,
+ GPIO82_SSP3_RXD,
+ GPIO83_SSP3_SFRM,
+ GPIO84_SSP3_SCLK,
+
+ GPIO20_GPIO, /* SDIO int */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO100_GPIO, /* SD CD */
+ GPIO101_GPIO, /* SD WP */
+
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO113_AC97_nRESET,
+
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16, /* maybe unused */
+ GPIO85_nPCE_1,
+ GPIO98_GPIO, /* CF IRQ */
+ GPIO99_GPIO, /* CF CD */
+ GPIO103_GPIO, /* Reset */
+
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
+static struct pxamci_platform_data csb726_mci_data;
+
+static int csb726_mci_init(struct device *dev,
+ irq_handler_t detect, void *data)
+{
+ int err;
+
+ csb726_mci_data.detect_delay = msecs_to_jiffies(500);
+
+ err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
+ if (err)
+ goto err_det_req;
+
+ err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
+ if (err)
+ goto err_det_dir;
+
+ err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
+ if (err)
+ goto err_ro_req;
+
+ err = gpio_direction_input(CSB726_GPIO_MMC_RO);
+ if (err)
+ goto err_ro_dir;
+
+ err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
+ IRQF_DISABLED, "MMC card detect", data);
+ if (err)
+ goto err_irq;
+
+ return 0;
+
+err_irq:
+err_ro_dir:
+ gpio_free(CSB726_GPIO_MMC_RO);
+err_ro_req:
+err_det_dir:
+ gpio_free(CSB726_GPIO_MMC_DETECT);
+err_det_req:
+ return err;
+}
+
+static int csb726_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(CSB726_GPIO_MMC_RO);
+}
+
+static void csb726_mci_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
+ gpio_free(CSB726_GPIO_MMC_RO);
+ gpio_free(CSB726_GPIO_MMC_DETECT);
+}
+
+static struct pxamci_platform_data csb726_mci = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = csb726_mci_init,
+ .get_ro = csb726_mci_get_ro,
+ /* FIXME setpower */
+ .exit = csb726_mci_exit,
+};
+
+static struct pxaohci_platform_data csb726_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT1 | NO_OC_PROTECTION,
+};
+
+static struct mtd_partition csb726_flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0,
+ .size = CSB726_FLASH_uMON,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data csb726_flash_data = {
+ .width = 2,
+ .parts = csb726_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb726_flash_partitions),
+};
+
+static struct resource csb726_flash_resources[] = {
+ {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb726_flash = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &csb726_flash_data,
+ },
+ .resource = csb726_flash_resources,
+ .num_resources = ARRAY_SIZE(csb726_flash_resources),
+};
+
+static struct resource csb726_sm501_resources[] = {
+ {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "sm501-localmem",
+ },
+ {
+ .start = PXA_CS4_PHYS + SZ_64M - SZ_2M,
+ .end = PXA_CS4_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "sm501-regs",
+ },
+ {
+ .start = CSB726_IRQ_SM501,
+ .end = CSB726_IRQ_SM501,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sm501_initdata csb726_sm501_initdata = {
+/* .devices = SM501_USE_USB_HOST, */
+ .devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
+};
+
+static struct sm501_platdata csb726_sm501_platdata = {
+ .init = &csb726_sm501_initdata,
+};
+
+static struct platform_device csb726_sm501 = {
+ .name = "sm501",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(csb726_sm501_resources),
+ .resource = csb726_sm501_resources,
+ .dev = {
+ .platform_data = &csb726_sm501_platdata,
+ },
+};
+
+static struct resource csb726_lan_resources[] = {
+ {
+ .start = PXA_CS3_PHYS,
+ .end = PXA_CS3_PHYS + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CSB726_IRQ_LAN,
+ .end = CSB726_IRQ_LAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device csb726_lan = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(csb726_lan_resources),
+ .resource = csb726_lan_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &csb726_flash,
+ &csb726_sm501,
+ &csb726_lan,
+};
+
+static void __init csb726_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
+/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
+/* MSC2 = 0x06697ff4; *//* none/SM501 */
+ MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_mci_info(&csb726_mci);
+ pxa_set_ohci_info(&csb726_ohci_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(CSB726, "Cogent CSB726")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .init_machine = csb726_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index e16f8e3..d245e59c 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,7 +4,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <mach/pxa-regs.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 1bd7f74..74d3f89 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -20,9 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index edcd9d5..0800362 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -21,9 +21,7 @@
#include <asm/mach-types.h>
#include <mach/irqs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index 77bb8e2..ed9c0c3 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -22,9 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 6d48e00..54af7ed 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -24,9 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
@@ -189,7 +187,7 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
eseries_register_clks();
- clk_add_alias("CLK_CK48M", &e740_t7l66xb_device.dev,
+ clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index be1ab8e..16ae721 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -23,9 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
@@ -190,7 +188,7 @@
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
- clk_add_alias("CLK_CK3P6MI", &e750_tc6393xb_device.dev,
+ clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index cc9b129..74ab098 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -23,9 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
@@ -196,7 +194,7 @@
static void __init e800_init(void)
{
- clk_add_alias("CLK_CK3P6MI", &e800_tc6393xb_device.dev,
+ clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f5ed803..920dfb8 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -11,40 +11,63 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x_keypad.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <mach/pxa2xx_spi.h>
#include "generic.h"
+#include "devices.h"
-/* GPIO IRQ usage */
-#define GPIO41_ETHIRQ (41)
+/* EM-X270 specific GPIOs */
#define GPIO13_MMC_CD (13)
+#define GPIO95_MMC_WP (95)
+#define GPIO56_NAND_RB (56)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD (114)
+#define GPIO20_NAND_RB (20)
+#define GPIO38_SD_PWEN (38)
+
+/* common GPIOs */
+#define GPIO11_NAND_CS (11)
+#define GPIO93_CAM_RESET (93)
+#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
-/* NAND control GPIOs */
-#define GPIO11_NAND_CS (11)
-#define GPIO56_NAND_RB (56)
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
-static unsigned long em_x270_pin_config[] = {
+static unsigned long common_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
@@ -150,21 +173,32 @@
GPIO18_RDY,
/* GPIO */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* sleep/resume button */
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
- GPIO56_GPIO, /* NAND Ready/Busy */
/* interrupts */
- GPIO13_GPIO, /* MMC card detect */
GPIO41_GPIO, /* DM9000 interrupt */
};
+static unsigned long em_x270_pin_config[] = {
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO95_GPIO, /* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+ GPIO20_GPIO, /* NAND Ready/Busy */
+ GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO114_GPIO, /* MMC card detect */
+};
+
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
@@ -185,7 +219,7 @@
};
static struct dm9000_plat_data em_x270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
+ .flags = DM9000_PLATF_NO_EEPROM,
};
static struct platform_device em_x270_dm9000 = {
@@ -200,6 +234,7 @@
static void __init em_x270_init_dm9000(void)
{
+ em_x270_dm9000_platdata.flags |= dm9000_flags;
platform_device_register(&em_x270_dm9000);
}
#else
@@ -289,7 +324,7 @@
{
dsb();
- return gpio_get_value(GPIO56_NAND_RB);
+ return gpio_get_value(nand_rb);
}
static struct mtd_partition em_x270_partition_info[] = {
@@ -354,14 +389,14 @@
gpio_direction_output(GPIO11_NAND_CS, 1);
- err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+ err = gpio_request(nand_rb, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
- gpio_direction_input(GPIO56_NAND_RB);
+ gpio_direction_input(nand_rb);
platform_device_register(&em_x270_nand);
}
@@ -369,6 +404,61 @@
static inline void em_x270_init_nand(void) {}
#endif
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Environment",
+ .offset = 0x00050000,
+ .size = 0x00010000,
+ }, {
+ .name = "Reserved",
+ .offset = 0x00060000,
+ .size = 0x00050000,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ }, {
+ .name = "Splashscreen",
+ .offset = 0x000b0000,
+ .size = 0x00050000,
+ }
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = em_x270_nor_parts,
+ .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+ },
+};
+
+static struct resource em_x270_nor_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &em_x270_nor_flash_resource,
+ .dev = {
+ .platform_data = &em_x270_nor_data,
+ },
+};
+
+static void __init em_x270_init_nor(void)
+{
+ platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
@@ -395,40 +485,93 @@
/* MCI controller setup */
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
- int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ int err;
+
+ em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+ if (IS_ERR(em_x270_sdio_ldo)) {
+ dev_err(dev, "can't request SDIO power supply: %ld\n",
+ PTR_ERR(em_x270_sdio_ldo));
+ return PTR_ERR(em_x270_sdio_ldo);
+ }
+
+ err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
- printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
- __func__, err);
- return err;
+ dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+ goto err_irq;
+ }
+
+ if (machine_is_em_x270()) {
+ err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+ if (err) {
+ dev_err(dev, "can't request MMC write protect: %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_input(GPIO95_MMC_WP);
+ } else {
+ err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+ if (err) {
+ dev_err(dev, "can't request MMC power control : %d\n",
+ err);
+ goto err_gpio_wp;
+ }
+ gpio_direction_output(GPIO38_SD_PWEN, 1);
}
return 0;
+
+err_gpio_wp:
+ free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+ regulator_put(em_x270_sdio_ldo);
+
+ return err;
}
static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
{
- /*
- FIXME: current hardware implementation does not allow to
- enable/disable MMC power. This will be fixed in next HW releases,
- and we'll need to add implmentation here.
- */
- return;
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+ regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+ regulator_enable(em_x270_sdio_ldo);
+ } else {
+ regulator_disable(em_x270_sdio_ldo);
+ }
}
static void em_x270_mci_exit(struct device *dev, void *data)
{
- int irq = gpio_to_irq(GPIO13_MMC_CD);
- free_irq(irq, data);
+ free_irq(gpio_to_irq(mmc_cd), data);
+ regulator_put(em_x270_sdio_ldo);
+
+ if (machine_is_em_x270())
+ gpio_free(GPIO95_MMC_WP);
+ else
+ gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO95_MMC_WP);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
- .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+ .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32,
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
@@ -436,33 +579,53 @@
static void __init em_x270_init_mmc(void)
{
+ if (machine_is_em_x270())
+ em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+ em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#else
static inline void em_x270_init_mmc(void) {}
#endif
-/* LCD 480x640 */
+/* LCD */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_mode = {
- .pixclock = 50000,
- .bpp = 16,
- .xres = 480,
- .yres = 640,
- .hsync_len = 8,
- .vsync_len = 2,
- .left_margin = 8,
- .upper_margin = 0,
- .right_margin = 24,
- .lower_margin = 4,
- .cmap_greyscale = 0,
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38250,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .sync = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .sync = 0,
+ },
};
static struct pxafb_mach_info em_x270_lcd = {
- .modes = &em_x270_lcd_mode,
- .num_modes = 1,
+ .modes = em_x270_lcd_modes,
+ .num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
+
static void __init em_x270_init_lcd(void)
{
set_pxa_fb_info(&em_x270_lcd);
@@ -471,6 +634,40 @@
static inline void em_x270_init_lcd(void) {}
#endif
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &em_x270_tdo24m_chip,
+ .platform_data = &em_x270_tdo24m_pdata,
+ },
+};
+
+static void __init em_x270_init_spi(void)
+{
+ pxa2xx_set_spi_info(1, &em_x270_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init em_x270_init_ac97(void)
{
@@ -481,23 +678,76 @@
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_matrix_keys[] = {
+static unsigned int em_x270_module_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
-struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
- .matrix_key_map = em_x270_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
+ .matrix_key_map = em_x270_module_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+static unsigned int em_x270_exeda_matrix_keys[] = {
+ KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+ KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+ KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+ KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+ KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+ KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+ KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+ KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+ KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+ KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+ KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+ KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+ KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+ KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+ KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+ KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+ KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+ KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+ KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+ KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+ KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+ KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+ KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+ KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+ KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+ KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+ KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+ KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+ KEY(7, 4, 0), KEY(7, 5, 0),
+ KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+ /* code map for the matrix keys */
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 8,
+ .matrix_key_map = em_x270_exeda_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(em_x270_exeda_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
- pxa_set_keypad_info(&em_x270_keypad_info);
+ if (machine_is_em_x270())
+ pxa_set_keypad_info(&em_x270_module_keypad_info);
+ else
+ pxa_set_keypad_info(&em_x270_exeda_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
@@ -535,19 +785,264 @@
static inline void em_x270_init_gpio_keys(void) {}
#endif
-static void __init em_x270_init(void)
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(struct device *dev)
{
+ int ret;
+
+ ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+ if (ret)
+ return ret;
+
+ gpio_direction_output(GPIO93_CAM_RESET, 0);
+
+ em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+ if (em_x270_camera_ldo == NULL) {
+ gpio_free(GPIO93_CAM_RESET);
+ return -ENODEV;
+ }
+
+ ret = regulator_enable(em_x270_camera_ldo);
+ if (ret) {
+ regulator_put(em_x270_camera_ldo);
+ gpio_free(GPIO93_CAM_RESET);
+ return ret;
+ }
+
+ gpio_set_value(GPIO93_CAM_RESET, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+ .init = em_x270_sensor_init,
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+ int ret;
+ int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+ if (on == is_on)
+ return 0;
+
+ gpio_set_value(GPIO93_CAM_RESET, !on);
+
+ if (on)
+ ret = regulator_enable(em_x270_camera_ldo);
+ else
+ ret = regulator_disable(em_x270_camera_ldo);
+
+ if (ret)
+ return ret;
+
+ gpio_set_value(GPIO93_CAM_RESET, on);
+
+ return 0;
+}
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0,
+ .power = em_x270_sensor_power,
+};
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+ {
+ I2C_BOARD_INFO("mt9m111", 0x48),
+ .platform_data = &iclink,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_camera(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
+ pxa_set_camera_info(&em_x270_camera_platform_data);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev, _supply) \
+ static struct regulator_consumer_supply _name##_consumers[] = { \
+ { \
+ .dev = _dev, \
+ .supply = _supply, \
+ }, \
+ }
+
+REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
+ static struct regulator_init_data _ldo##_data = { \
+ .constraints = { \
+ .min_uV = _min_uV, \
+ .max_uV = _max_uV, \
+ .state_mem = { \
+ .enabled = 0, \
+ }, \
+ .valid_ops_mask = _ops_mask, \
+ }, \
+ .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers), \
+ .consumer_supplies = _ldo##_consumers, \
+ };
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+ REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+
+struct led_info em_x270_led_info = {
+ .name = "em-x270:orange",
+ .default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+ .name = "LP555597P6H-FPS",
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .voltage_max_design = 4200000,
+ .voltage_min_design = 3000000,
+ .use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+ apm_queue_event(APM_LOW_BATTERY);
+}
+
+static void em_x270_battery_critical(void)
+{
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+ .battery_info = &em_x270_psy_info,
+
+ .charge_milliamp = 1000,
+ .charge_millivolt = 4200,
+
+ .vbat_low = 3600,
+ .vbat_crit = 3400,
+ .vbat_charge_start = 4100,
+ .vbat_charge_stop = 4200,
+ .vbat_charge_restart = 4000,
+
+ .vcharge_min = 3200,
+ .vcharge_max = 5500,
+
+ .tbat_low = 197,
+ .tbat_high = 78,
+ .tbat_restart = 100,
+
+ .batmon_interval = 0,
+
+ .battery_low = em_x270_battery_low,
+ .battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata) \
+ { \
+ .name = "da903x-" #_name, \
+ .id = DA9030_ID_##_id, \
+ .platform_data = _pdata, \
+ }
+
+#define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+ DA9030_LDO(3),
+ DA9030_LDO(5),
+ DA9030_LDO(10),
+ DA9030_LDO(12),
+ DA9030_LDO(19),
+
+ DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+ DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+ DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+ .subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = IRQ_GPIO(0),
+ .platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+ pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+ i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static void __init em_x270_module_init(void)
+{
+ pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+ mmc_cd = GPIO13_MMC_CD;
+ nand_rb = GPIO56_NAND_RB;
+ dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+ pr_info("%s\n", __func__);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+ mmc_cd = GPIO114_MMC_CD;
+ nand_rb = GPIO20_NAND_RB;
+ dm9000_flags = DM9000_PLATF_16BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+ if (machine_is_em_x270())
+ em_x270_module_init();
+ else if (machine_is_exeda())
+ em_x270_exeda_init();
+ else
+ panic("Unsupported machine: %d\n", machine_arch_type);
+
+ em_x270_init_da9030();
em_x270_init_dm9000();
em_x270_init_rtc();
em_x270_init_nand();
+ em_x270_init_nor();
em_x270_init_lcd();
em_x270_init_mmc();
em_x270_init_ohci();
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
+ em_x270_init_camera();
+ em_x270_init_spi();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
@@ -559,3 +1054,13 @@
.timer = &pxa_timer,
.init_machine = em_x270_init,
MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = em_x270_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index dfce7d5..c60dadf 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,8 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index df5f822..92ba16e 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -19,18 +19,16 @@
#include <linux/input.h>
#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 0ccc91c..3126a35 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -26,8 +26,9 @@
#include <asm/mach/map.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include <mach/reset.h>
+#include <mach/gpio.h>
+#include <mach/pxa2xx-gpio.h>
#include "generic.h"
@@ -127,3 +128,33 @@
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
get_clk_frequency_khz(1);
}
+
+/*
+ * Configure pins for GPIO or other functions
+ */
+int pxa_gpio_mode(int gpio_mode)
+{
+ unsigned long flags;
+ int gpio = gpio_mode & GPIO_MD_MASK_NR;
+ int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
+ int gafr;
+
+ if (gpio > pxa_last_gpio)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ if (gpio_mode & GPIO_DFLT_LOW)
+ GPCR(gpio) = GPIO_bit(gpio);
+ else if (gpio_mode & GPIO_DFLT_HIGH)
+ GPSR(gpio) = GPIO_bit(gpio);
+ if (gpio_mode & GPIO_MD_MASK_DIR)
+ GPDR(gpio) |= GPIO_bit(gpio);
+ else
+ GPDR(gpio) &= ~GPIO_bit(gpio);
+ gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
+ GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(pxa_gpio_mode);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index dc876a8..3465268 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -9,20 +9,17 @@
* published by the Free Software Foundation.
*/
-typedef int (*set_wake_t)(unsigned int, unsigned int);
-
struct sys_timer;
extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq(int irq_nr, set_wake_t fn);
-extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn);
+extern void __init pxa_init_irq(int irq_nr,
+ int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
extern unsigned int get_clk_frequency_khz(int info);
-extern int pxa_last_gpio;
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
deleted file mode 100644
index 5fec1e4..0000000
--- a/arch/arm/mach-pxa/gpio.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/gpio.c
- *
- * Generic PXA GPIO handling
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <asm/gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-
-#include "generic.h"
-
-#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000))
-#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004))
-#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008))
-#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
-struct pxa_gpio_chip {
- struct gpio_chip chip;
- void __iomem *regbase;
-};
-
-int pxa_last_gpio;
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-#define __gpio_is_inverted(gpio) (0)
-#endif
-
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
-{
- unsigned long flags;
- int gpio = gpio_mode & GPIO_MD_MASK_NR;
- int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
- int gafr;
-
- if (gpio > pxa_last_gpio)
- return -EINVAL;
-
- local_irq_save(flags);
- if (gpio_mode & GPIO_DFLT_LOW)
- GPCR(gpio) = GPIO_bit(gpio);
- else if (gpio_mode & GPIO_DFLT_HIGH)
- GPSR(gpio) = GPIO_bit(gpio);
- if (gpio_mode & GPIO_MD_MASK_DIR)
- GPDR(gpio) |= GPIO_bit(gpio);
- else
- GPDR(gpio) &= ~GPIO_bit(gpio);
- gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
- GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2));
- local_irq_restore(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(pxa_gpio_mode);
-
-static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 value;
- struct pxa_gpio_chip *pxa;
- void __iomem *gpdr;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- gpdr = pxa->regbase + GPDR_OFFSET;
- local_irq_save(flags);
- value = __raw_readl(gpdr);
- if (__gpio_is_inverted(chip->base + offset))
- value |= mask;
- else
- value &= ~mask;
- __raw_writel(value, gpdr);
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int pxa_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- unsigned long flags;
- u32 mask = 1 << offset;
- u32 tmp;
- struct pxa_gpio_chip *pxa;
- void __iomem *gpdr;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- __raw_writel(mask,
- pxa->regbase + (value ? GPSR_OFFSET : GPCR_OFFSET));
- gpdr = pxa->regbase + GPDR_OFFSET;
- local_irq_save(flags);
- tmp = __raw_readl(gpdr);
- if (__gpio_is_inverted(chip->base + offset))
- tmp &= ~mask;
- else
- tmp |= mask;
- __raw_writel(tmp, gpdr);
- local_irq_restore(flags);
-
- return 0;
-}
-
-/*
- * Return GPIO level
- */
-static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- u32 mask = 1 << offset;
- struct pxa_gpio_chip *pxa;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
- return __raw_readl(pxa->regbase + GPLR_OFFSET) & mask;
-}
-
-/*
- * Set output GPIO level
- */
-static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- u32 mask = 1 << offset;
- struct pxa_gpio_chip *pxa;
-
- pxa = container_of(chip, struct pxa_gpio_chip, chip);
-
- if (value)
- __raw_writel(mask, pxa->regbase + GPSR_OFFSET);
- else
- __raw_writel(mask, pxa->regbase + GPCR_OFFSET);
-}
-
-#define GPIO_CHIP(_n) \
- [_n] = { \
- .regbase = GPIO##_n##_BASE, \
- .chip = { \
- .label = "gpio-" #_n, \
- .direction_input = pxa_gpio_direction_input, \
- .direction_output = pxa_gpio_direction_output, \
- .get = pxa_gpio_get, \
- .set = pxa_gpio_set, \
- .base = (_n) * 32, \
- .ngpio = 32, \
- }, \
- }
-
-static struct pxa_gpio_chip pxa_gpio_chip[] = {
- GPIO_CHIP(0),
- GPIO_CHIP(1),
- GPIO_CHIP(2),
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- GPIO_CHIP(3),
-#endif
-};
-
-/*
- * PXA GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-
-static unsigned long GPIO_IRQ_rising_edge[4];
-static unsigned long GPIO_IRQ_falling_edge[4];
-static unsigned long GPIO_IRQ_mask[4];
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- }
-
- return 0;
-}
-
-static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
-{
- int gpio, idx;
-
- gpio = IRQ_TO_GPIO(irq);
- idx = gpio >> 5;
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- * GPIOs set to alternate function or to output during probe
- */
- if ((GPIO_IRQ_rising_edge[idx] & GPIO_bit(gpio)) ||
- (GPIO_IRQ_falling_edge[idx] & GPIO_bit(gpio)))
- return 0;
-
- if (__gpio_is_occupied(gpio))
- return 0;
-
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (__gpio_is_inverted(gpio))
- GPDR(gpio) |= GPIO_bit(gpio);
- else
- GPDR(gpio) &= ~GPIO_bit(gpio);
-
- if (type & IRQ_TYPE_EDGE_RISING)
- __set_bit(gpio, GPIO_IRQ_rising_edge);
- else
- __clear_bit(gpio, GPIO_IRQ_rising_edge);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- __set_bit(gpio, GPIO_IRQ_falling_edge);
- else
- __clear_bit(gpio, GPIO_IRQ_falling_edge);
-
- GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
- GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-
- pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
- ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
- ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
- return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged. This is for GPIO 0 and 1.
- */
-
-static void pxa_ack_low_gpio(unsigned int irq)
-{
- GEDR0 = (1 << (irq - IRQ_GPIO0));
-}
-
-static void pxa_mask_low_gpio(unsigned int irq)
-{
- ICMR &= ~(1 << (irq - PXA_IRQ(0)));
-}
-
-static void pxa_unmask_low_gpio(unsigned int irq)
-{
- ICMR |= 1 << (irq - PXA_IRQ(0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
- .name = "GPIO-l",
- .ack = pxa_ack_low_gpio,
- .mask = pxa_mask_low_gpio,
- .unmask = pxa_unmask_low_gpio,
- .set_type = pxa_gpio_irq_type,
-};
-
-/*
- * Demux handler for GPIO>=2 edge detect interrupts
- */
-
-#define GEDR_BITS (sizeof(gedr) * BITS_PER_BYTE)
-
-static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
- int loop, bit, n;
- unsigned long gedr[4];
-
- do {
- gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3;
- gedr[1] = GEDR1 & GPIO_IRQ_mask[1];
- gedr[2] = GEDR2 & GPIO_IRQ_mask[2];
- gedr[3] = GEDR3 & GPIO_IRQ_mask[3];
-
- GEDR0 = gedr[0]; GEDR1 = gedr[1];
- GEDR2 = gedr[2]; GEDR3 = gedr[3];
-
- loop = 0;
- bit = find_first_bit(gedr, GEDR_BITS);
- while (bit < GEDR_BITS) {
- loop = 1;
-
- n = PXA_GPIO_IRQ_BASE + bit;
- generic_handle_irq(n);
-
- bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
- }
- } while (loop);
-}
-
-static void pxa_ack_muxed_gpio(unsigned int irq)
-{
- int gpio = irq - IRQ_GPIO(2) + 2;
- GEDR(gpio) = GPIO_bit(gpio);
-}
-
-static void pxa_mask_muxed_gpio(unsigned int irq)
-{
- int gpio = irq - IRQ_GPIO(2) + 2;
- __clear_bit(gpio, GPIO_IRQ_mask);
- GRER(gpio) &= ~GPIO_bit(gpio);
- GFER(gpio) &= ~GPIO_bit(gpio);
-}
-
-static void pxa_unmask_muxed_gpio(unsigned int irq)
-{
- int gpio = irq - IRQ_GPIO(2) + 2;
- int idx = gpio >> 5;
- __set_bit(gpio, GPIO_IRQ_mask);
- GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
- GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-}
-
-static struct irq_chip pxa_muxed_gpio_chip = {
- .name = "GPIO",
- .ack = pxa_ack_muxed_gpio,
- .mask = pxa_mask_muxed_gpio,
- .unmask = pxa_unmask_muxed_gpio,
- .set_type = pxa_gpio_irq_type,
-};
-
-void __init pxa_init_gpio(int gpio_nr, set_wake_t fn)
-{
- int irq, i, gpio;
-
- pxa_last_gpio = gpio_nr - 1;
-
- /* clear all GPIO edge detects */
- for (i = 0; i < gpio_nr; i += 32) {
- GFER(i) = 0;
- GRER(i) = 0;
- GEDR(i) = GEDR(i);
- }
-
- /* GPIO 0 and 1 must have their mask bit always set */
- GPIO_IRQ_mask[0] = 3;
-
- for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
- set_irq_chip(irq, &pxa_low_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
- set_irq_chip(irq, &pxa_muxed_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* Install handler for GPIO>=2 edge detect interrupts */
- set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-
- pxa_low_gpio_chip.set_wake = fn;
- pxa_muxed_gpio_chip.set_wake = fn;
-
- /* add a GPIO chip for each register bank.
- * the last PXA25x register only contains 21 GPIOs
- */
- for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
- if (gpio + 32 > gpio_nr)
- pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
- gpiochip_add(&pxa_gpio_chip[i].chip);
- }
-}
-
-#ifdef CONFIG_PM
-
-static unsigned long saved_gplr[4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_grer[4];
-static unsigned long saved_gfer[4];
-
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
- int i, gpio;
-
- for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
- saved_gplr[i] = GPLR(gpio);
- saved_gpdr[i] = GPDR(gpio);
- saved_grer[i] = GRER(gpio);
- saved_gfer[i] = GFER(gpio);
-
- /* Clear GPIO transition detect bits */
- GEDR(gpio) = GEDR(gpio);
- }
- return 0;
-}
-
-static int pxa_gpio_resume(struct sys_device *dev)
-{
- int i, gpio;
-
- for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
- /* restore level with set/clear */
- GPSR(gpio) = saved_gplr[i];
- GPCR(gpio) = ~saved_gplr[i];
-
- GRER(gpio) = saved_grer[i];
- GFER(gpio) = saved_gfer[i];
- GPDR(gpio) = saved_gpdr[i];
- }
- return 0;
-}
-#else
-#define pxa_gpio_suspend NULL
-#define pxa_gpio_resume NULL
-#endif
-
-struct sysdev_class pxa_gpio_sysclass = {
- .name = "gpio",
- .suspend = pxa_gpio_suspend,
- .resume = pxa_gpio_resume,
-};
-
-static int __init pxa_gpio_init(void)
-{
- return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index e296ce1..ca9912e 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -38,14 +38,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+
+#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-
#include "generic.h"
static struct resource flash_resource = {
@@ -191,6 +189,11 @@
return 0;
}
+int __attribute__((weak)) am300_init(void)
+{
+ return 0;
+}
+
static void __init carrier_board_init(void)
{
/*
@@ -198,6 +201,7 @@
* they cannot be detected programatically
*/
am200_init();
+ am300_init();
}
static void __init gumstix_init(void)
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index da6e442..6a197fb 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -24,14 +24,15 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+
+#include <mach/pxa25x.h>
#include <mach/h5000.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/udc.h>
+
#include "generic.h"
/*
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
new file mode 100644
index 0000000..cea99fe
--- /dev/null
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -0,0 +1,166 @@
+/*
+ * linux/arch/arm/mach-pxa/himalaya.c
+ *
+ * Hardware definitions for the HTC Himalaya
+ *
+ * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
+ *
+ * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include "generic.h"
+
+/* ---------------------- Himalaya LCD definitions -------------------- */
+
+static struct w100_gen_regs himalaya_lcd_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00fff003,
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode himalaya4_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 0,
+ .right_margin = 31,
+ .upper_margin = 15,
+ .lower_margin = 0,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 80,
+ .pixclk_divider = 15,
+ .pixclk_divider_rotated = 15,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_mode himalaya6_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0xa1700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 0xb,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs himalaya_w100_gpio_info = {
+ .init_data1 = 0xffff0000, /* GPIO_DATA */
+ .gpio_dir1 = 0x00000000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x003c0000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info himalaya_fb_info = {
+ .num_modes = 1,
+ .regs = &himalaya_lcd_regs,
+ .gpio = &himalaya_w100_gpio_info,
+ .xtal_freq = 16000000,
+};
+
+static struct resource himalaya_fb_resources[] = {
+ [0] = {
+ .start = 0x08000000,
+ .end = 0x08ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device himalaya_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &himalaya_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(himalaya_fb_resources),
+ .resource = himalaya_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &himalaya_fb_device,
+};
+
+static void __init himalaya_lcd_init(void)
+{
+ int himalaya_boardid;
+
+ himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
+ printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
+ himalaya_boardid);
+
+ switch (himalaya_boardid) {
+ case 0x4:
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ break;
+ case 0x6:
+ himalaya_fb_info.modelist = &himalaya6_lcd_mode;
+ break;
+ default:
+ printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
+ himalaya_boardid);
+ himalaya_fb_info.modelist = &himalaya4_lcd_mode;
+ }
+}
+
+static void __init himalaya_init(void)
+{
+ himalaya_lcd_init();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+MACHINE_START(HIMALAYA, "HTC Himalaya")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .init_machine = himalaya_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 013b15b..b6243b5 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -31,8 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 364c5e2..2121309 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -28,11 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
+#include <mach/pxa27x.h>
#include <mach/i2c.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/regs-ssp.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 2ae373f..3f2a01d 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -1,19 +1,31 @@
#ifndef _COLIBRI_H_
#define _COLIBRI_H_
+/*
+ * common settings for all modules
+ */
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
+#else
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern void colibri_pxa3xx_init_lcd(int bl_pin);
+#else
+static inline void colibri_pxa3xx_init_lcd(int) {}
+#endif
/* physical memory regions */
-#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
-#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
-/* virtual memory regions */
-#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */
+/* definitions for Colibri PXA270 */
-/* size of flash */
-#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000 114
-#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+#define COLIBRI_PXA270_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
+#define COLIBRI_PXA270_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet */
+#define COLIBRI_PXA270_ETH_IRQ_GPIO 114
+#define COLIBRI_PXA270_ETH_IRQ \
+ gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
#endif /* _COLIBRI_H_ */
+
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
new file mode 100644
index 0000000..747ab1a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -0,0 +1,26 @@
+/*
+ * Support for Cogent CSB726
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef CSB726_H
+#define CSB726_H
+
+#define CSB726_GPIO_IRQ_LAN 52
+#define CSB726_GPIO_IRQ_SM501 53
+#define CSB726_GPIO_MMC_DETECT 100
+#define CSB726_GPIO_MMC_RO 101
+
+#define CSB726_FLASH_SIZE (64 * 1024 * 1024)
+#define CSB726_FLASH_uMON (8 * 1024 * 1024)
+
+#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 7804637..5bd5589 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -12,35 +12,10 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
+#include <mach/hardware.h>
-typedef struct pxa_dma_desc {
- volatile u32 ddadr; /* Points to the next descriptor + flags */
- volatile u32 dsadr; /* DSADR value for the current transfer */
- volatile u32 dtadr; /* DTADR value for the current transfer */
- volatile u32 dcmd; /* DCMD value for the current transfer */
-} pxa_dma_desc;
+/* DMA Controller Registers Definitions */
+#define DMAC_REGS_VIRT io_p2v(0x40000000)
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int num_ch);
-
-int pxa_request_dma (char *name,
- pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data);
-
-void pxa_free_dma (int dma_ch);
-
+#include <plat/dma.h>
#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 2c538d8..b024a8b 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,42 +24,118 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
-#include <mach/pxa-regs.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
-
#include <asm-generic/gpio.h>
+#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space.
- */
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L GPIO_REG(0x0054)
+#define GAFR0_U GPIO_REG(0x0058)
+#define GAFR1_L GPIO_REG(0x005C)
+#define GAFR1_U GPIO_REG(0x0060)
+#define GAFR2_L GPIO_REG(0x0064)
+#define GAFR2_U GPIO_REG(0x0068)
+#define GAFR3_L GPIO_REG(0x006C)
+#define GAFR3_U GPIO_REG(0x0070)
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
#define NR_BUILTIN_GPIO 128
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
- return GPLR(gpio) & GPIO_bit(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
- if (value)
- GPSR(gpio) = GPIO_bit(gpio);
- else
- GPCR(gpio) = GPIO_bit(gpio);
- } else {
- __gpio_set_value(gpio, value);
- }
-}
-
-#define gpio_cansleep __gpio_cansleep
-
+#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
#define irq_to_gpio(irq) IRQ_TO_GPIO(irq)
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+ return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+ int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+ int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ return af != 1 || dir == 0;
+ else
+ return af != 0 || dir != 0;
+ } else
+ return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 099f54a..06abd41 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -97,4 +97,5 @@
/* for expansion boards that can't be programatically detected */
extern int am200_init(void);
+extern int am300_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 4cb2415..751b748 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -25,7 +25,6 @@
/* FPGA register virtual addresses */
#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 38d68d9..82a399f 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -69,7 +69,7 @@
#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0)
#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1)
#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3)
+#define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3)
/*
* CPLD EGPIOs
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index a72869b..b13dc02 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -1,7 +1,6 @@
#ifndef __ASM_ARCH_MFP_PXA25X_H
#define __ASM_ARCH_MFP_PXA25X_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
/* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index da4f85a..6543c05 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -8,7 +8,6 @@
* specific controller, and this should work in most cases.
*/
-#include <mach/mfp.h>
#include <mach/mfp-pxa2xx.h>
/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 3e92115..658b28e 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -1,7 +1,7 @@
#ifndef __ASM_ARCH_MFP_PXA2XX_H
#define __ASM_ARCH_MFP_PXA2XX_H
-#include <mach/mfp.h>
+#include <plat/mfp.h>
/*
* the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index bc1fb33..ae84411 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -15,7 +15,6 @@
#ifndef __ASM_ARCH_MFP_PXA300_H
#define __ASM_ARCH_MFP_PXA300_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
@@ -41,6 +40,7 @@
#endif
/* Chip Select */
+#define GPIO1_nCS2 MFP_CFG(GPIO1, AF1)
#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1)
/* AC97 */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 67f8385..07897e6 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -15,7 +15,6 @@
#ifndef __ASM_ARCH_MFP_PXA320_H
#define __ASM_ARCH_MFP_PXA320_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
@@ -38,6 +37,7 @@
#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0)
/* Chip Select */
+#define GPIO3_nCS2 MFP_CFG(GPIO3, AF1)
#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1)
/* AC97 */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
index 1f6b35c..d375195 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -1,68 +1,9 @@
#ifndef __ASM_ARCH_MFP_PXA3XX_H
#define __ASM_ARCH_MFP_PXA3XX_H
+#include <plat/mfp.h>
+
#define MFPR_BASE (0x40e10000)
-#define MFPR_SIZE (PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL (0x1 << 15)
-#define MFPR_PULLUP_EN (0x1 << 14)
-#define MFPR_PULLDOWN_EN (0x1 << 13)
-#define MFPR_SLEEP_SEL (0x1 << 9)
-#define MFPR_SLEEP_OE_N (0x1 << 7)
-#define MFPR_EDGE_CLEAR (0x1 << 6)
-#define MFPR_EDGE_FALL_EN (0x1 << 5)
-#define MFPR_EDGE_RISE_EN (0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x) ((x) << 8)
-#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
-
-#define MFPR_EDGE_NONE (0)
-#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
- * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
- *
- * Input 0 X(0) X(0) X(0) 0
- * Drive 0 0 0 0 X(1) 0
- * Drive 1 0 1 X(1) 0 0
- * Pull hi (1) 1 X(1) 1 0 0
- * Pull lo (0) 1 X(0) 0 1 0
- * Z (float) 1 X(0) 0 0 0
- */
-#define MFPR_LPM_INPUT (0)
-#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK (0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior, the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition pull_sel pullup_en pulldown_en
- * MFPR_PULL_NONE 0 0 0
- * MFPR_PULL_LOW 1 0 1
- * MFPR_PULL_HIGH 1 1 0
- * MFPR_PULL_BOTH 1 1 1
- */
-#define MFPR_PULL_NONE (0)
-#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
/* PXA3xx common MFP configurations - processor specific ones defined
* in mfp-pxa300.h and mfp-pxa320.h
@@ -197,56 +138,21 @@
#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0)
#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0)
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by pxa3xx_mfp_init_addr()
- *
- * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
- * structure, which represents a range of MFP pins from "start" to
- * "end", with the offset begining at "offset", to define a single
- * pin, let "end" = -1
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR() to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
+/* NOTE: usage of these two functions is not recommended,
+ * use pxa3xx_mfp_config() instead.
*/
-struct pxa3xx_mfp_addr_map {
- unsigned int start;
- unsigned int end;
- unsigned long offset;
-};
+static inline unsigned long pxa3xx_mfp_read(int mfp)
+{
+ return mfp_read(mfp);
+}
-#define MFP_ADDR_X(start, end, offset) \
- { MFP_PIN_##start, MFP_PIN_##end, offset }
+static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
+{
+ mfp_write(mfp, val);
+}
-#define MFP_ADDR(pin, offset) \
- { MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-
-/*
- * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
- * to the MFPR register
- */
-unsigned long pxa3xx_mfp_read(int mfp);
-void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
-
-/*
- * pxa3xx_mfp_config - configure the MFPR registers
- *
- * used by board specific initialization code
- */
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
-
-/*
- * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
- * index and MFPR register offset
- *
- * used by processor specific code
- */
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
-void __init pxa3xx_init_mfp(void);
+static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
+{
+ mfp_config(mfp_cfg, num);
+}
#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index fa73f56..0d119d3 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_MFP_PXA9xx_H
#define __ASM_ARCH_MFP_PXA9xx_H
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
/* GPIO */
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index cfca815..297387e 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -15,8 +15,8 @@
#ifndef __ARCH_PXA_MTD_XIP_H__
#define __ARCH_PXA_MTD_XIP_H__
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
+#include <mach/regs-intc.h>
#define xip_irqpending() (ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
new file mode 100644
index 0000000..7c295a4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -0,0 +1,109 @@
+/*
+ * GPIOs and interrupts for Palm LifeDrive Handheld Computer
+ *
+ * Authors: Alex Osborne <ato@meshy.org>
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMLD_H_
+#define _INCLUDE_PALMLD_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMLD_GPIO_RESET 1
+#define GPIO_NR_PALMLD_POWER_DETECT 4
+#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMLD_POWER_SWITCH 12
+#define GPIO_NR_PALMLD_EARPHONE_DETECT 13
+#define GPIO_NR_PALMLD_LOCK_SWITCH 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMLD_SD_DETECT_N 14
+#define GPIO_NR_PALMLD_SD_POWER 114
+#define GPIO_NR_PALMLD_SD_READONLY 116
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMLD_WM9712_IRQ 27
+
+/* IRDA */
+#define GPIO_NR_PALMLD_IR_DISABLE 108
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMLD_BL_POWER 19
+#define GPIO_NR_PALMLD_LCD_POWER 96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMLD_BORDER_SWITCH 21
+#define GPIO_NR_PALMLD_BORDER_SELECT 22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMLD_BT_POWER 17
+#define GPIO_NR_PALMLD_BT_RESET 83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMLD_PCMCIA_READY 38
+#define GPIO_NR_PALMLD_PCMCIA_POWER 36
+#define GPIO_NR_PALMLD_PCMCIA_RESET 81
+
+/* LEDs */
+#define GPIO_NR_PALMLD_LED_GREEN 52
+#define GPIO_NR_PALMLD_LED_AMBER 94
+
+/* IDE */
+#define GPIO_NR_PALMLD_IDE_IRQ 95
+#define GPIO_NR_PALMLD_IDE_RESET 98
+#define GPIO_NR_PALMLD_IDE_PWEN 115
+
+/* USB */
+#define GPIO_NR_PALMLD_USB_DETECT_N 3
+#define GPIO_NR_PALMLD_USB_READY 86
+#define GPIO_NR_PALMLD_USB_RESET 88
+#define GPIO_NR_PALMLD_USB_INT 106
+#define GPIO_NR_PALMLD_USB_POWER 118
+/* 20, 53 and 86 are usb related too */
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+
+
+/** HERE ARE INIT VALUES **/
+
+/* IO mappings */
+#define PALMLD_USB_PHYS PXA_CS2_PHYS
+#define PALMLD_USB_VIRT 0xf0000000
+#define PALMLD_USB_SIZE 0x00100000
+
+#define PALMLD_IDE_PHYS 0x20000000
+#define PALMLD_IDE_VIRT 0xf1000000
+#define PALMLD_IDE_SIZE 0x00100000
+
+#define PALMLD_PHYS_IO_START 0x40000000
+
+/* BATTERY */
+#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMLD_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMLD_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMLD_MAX_INTENSITY 0xFE
+#define PALMLD_DEFAULT_INTENSITY 0x7E
+#define PALMLD_LIMIT_MASK 0x7F
+#define PALMLD_PRESCALER 0x3F
+#define PALMLD_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
new file mode 100644
index 0000000..94db288
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -0,0 +1,84 @@
+/*
+ * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
+ *
+ * Authors: Ales Snuparek <snuparek@atlas.cz>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMT5_H_
+#define _INCLUDE_PALMT5_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMT5_GPIO_RESET 1
+
+#define GPIO_NR_PALMT5_POWER_DETECT 90
+#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N 10
+#define GPIO_NR_PALMT5_EARPHONE_DETECT 107
+
+/* SD/MMC */
+#define GPIO_NR_PALMT5_SD_DETECT_N 14
+#define GPIO_NR_PALMT5_SD_POWER 114
+#define GPIO_NR_PALMT5_SD_READONLY 115
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMT5_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMT5_IR_DISABLE 40
+
+/* USB */
+#define GPIO_NR_PALMT5_USB_DETECT_N 15
+#define GPIO_NR_PALMT5_USB_POWER 95
+#define GPIO_NR_PALMT5_USB_PULLUP 93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMT5_BL_POWER 84
+#define GPIO_NR_PALMT5_LCD_POWER 96
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMT5_BT_POWER 17
+#define GPIO_NR_PALMT5_BT_RESET 83
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses */
+#define PALMT5_PHYS_RAM_START 0xa0000000
+#define PALMT5_PHYS_IO_START 0x40000000
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME 21
+
+/* BATTERY */
+#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMT5_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#define PALMT5_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMT5_MAX_INTENSITY 0xFE
+#define PALMT5_DEFAULT_INTENSITY 0x7E
+#define PALMT5_LIMIT_MASK 0x7F
+#define PALMT5_PRESCALER 0x3F
+#define PALMT5_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 8334246..a6eeef8 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,3 +27,13 @@
extern void pxa_cpu_resume(void);
extern int pxa_pm_enter(suspend_state_t state);
+
+/* NOTE: this is for PM debugging on Lubbock, it's really a big
+ * ugly, but let's keep the crap minimum here, instead of direct
+ * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
+ */
+#ifdef CONFIG_ARCH_LUBBOCK
+extern void lubbock_set_hexled(uint32_t value);
+#else
+#define lubbock_set_hexled(x)
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
deleted file mode 100644
index 31d615a..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pxa-regs.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA_REGS_H
-#define __PXA_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS 0x00000000
-#define PXA_CS1_PHYS 0x04000000
-#define PXA_CS2_PHYS 0x08000000
-#define PXA_CS3_PHYS 0x0C000000
-#define PXA_CS4_PHYS 0x10000000
-#define PXA_CS5_PHYS 0x14000000
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
-#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
-#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
-#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
- (0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
- (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
- (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
-
-
-
-/*
- * DMA Controller
- */
-#define DCSR(x) __REG2(0x40000000, (x) << 2)
-
-#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
-#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_EORINTR (1 << 9) /* The end of Receive */
-#endif
-
-#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
-#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
-
-#define DRCMR(n) (*(((n) < 64) ? \
- &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
- &__REG2(0x40001100, ((n) & 0x3f) << 2)))
-
-#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
-#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-
-#define DDADR(x) __REG2(0x40000200, (x) << 4)
-#define DSADR(x) __REG2(0x40000204, (x) << 4)
-#define DTADR(x) __REG2(0x40000208, (x) << 4)
-#define DCMD(x) __REG2(0x4000020c, (x) << 4)
-
-#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
-#define DDADR_STOP (1 << 0) /* Stop (read / write) */
-
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
-#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
-#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
-#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
-#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
-#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
-#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
-#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
-#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
-#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-/*
- * Real Time Clock
- */
-
-#define RCNR __REG(0x40900000) /* RTC Count Register */
-#define RTAR __REG(0x40900004) /* RTC Alarm Register */
-#define RTSR __REG(0x40900008) /* RTC Status Register */
-#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
-#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
-#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
-#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
-#define RTSR_AL (1 << 0) /* RTC alarm detected */
-
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0 __REG(0x40A00000) /* */
-#define OSMR1 __REG(0x40A00004) /* */
-#define OSMR2 __REG(0x40A00008) /* */
-#define OSMR3 __REG(0x40A0000C) /* */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
-#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
-#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
-#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3 (1 << 3) /* Match status channel 3 */
-#define OSSR_M2 (1 << 2) /* Match status channel 2 */
-#define OSSR_M1 (1 << 1) /* Match status channel 1 */
-#define OSSR_M0 (1 << 0) /* Match status channel 0 */
-
-#define OWER_WME (1 << 0) /* Watchdog Match Enable */
-
-#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
-#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
-#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
-#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
-
-
-/*
- * Interrupt Controller
- */
-
-#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
-#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
-#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
-#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
-#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
-#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-/*
- * General Purpose I/O
- */
-
-#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
-
-#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
-
-#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
-
-#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
-
-#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
-
-#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
-
-#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
-
-#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
-#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
-
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
- ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h
new file mode 100644
index 0000000..508c3ba
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA25x_H
+#define __MACH_PXA25x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
new file mode 100644
index 0000000..6876e16
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -0,0 +1,19 @@
+#ifndef __MACH_PXA27x_H
+#define __MACH_PXA27x_H
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+
+#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
+#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
+#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
+#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
+#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
index d83393e..1209c44 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -3,6 +3,8 @@
#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+#include <mach/gpio.h>
+
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 77102d6..4fcddd9 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -14,6 +14,19 @@
#ifndef __PXA2XX_REGS_H
#define __PXA2XX_REGS_H
+#include <mach/hardware.h>
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
/*
* Memory controller
*/
@@ -69,24 +82,6 @@
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-#ifdef CONFIG_PXA27x
-
-#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
-#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
-#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
-#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
-#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-
-#endif
-
-
/*
* Power Manager
*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h
new file mode 100644
index 0000000..2f33076
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa300.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA300_H
+#define __MACH_PXA300_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h
new file mode 100644
index 0000000..cab78e9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa320.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_PXA320_H
+#define __MACH_PXA320_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#endif /* __MACH_PXA320_H */
+
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index bcf3fb2..7d1a059 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -13,6 +13,17 @@
#ifndef __ASM_ARCH_PXA3XX_REGS_H
#define __ASM_ARCH_PXA3XX_REGS_H
+#include <mach/hardware.h>
+
+/*
+ * Static Chip Selects
+ */
+
+#define PXA300_CS0_PHYS (0x00000000) /* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS (0x30000000) /* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS (0x10000000)
+#define PXA3xx_CS3_PHYS (0x14000000)
+
/*
* Oscillator Configuration Register (OSCC)
*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h
new file mode 100644
index 0000000..d45f76a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa930.h
@@ -0,0 +1,8 @@
+#ifndef __MACH_PXA930_H
+#define __MACH_PXA930_H
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
new file mode 100644
index 0000000..ad23e74
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_INTC_H
+#define __ASM_MACH_REGS_INTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
+#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
+#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
+#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+
+#endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/include/mach/regs-ost.h
new file mode 100644
index 0000000..a3e5f86
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ost.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_MACH_REGS_OST_H
+#define __ASM_MACH_REGS_OST_H
+
+#include <mach/hardware.h>
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/include/mach/regs-rtc.h
new file mode 100644
index 0000000..f0e4a58
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-rtc.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_REGS_RTC_H
+#define __ASM_MACH_REGS_RTC_H
+
+#include <mach/hardware.h>
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
index cf31986..8152be6 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -37,7 +37,6 @@
#if defined(CONFIG_PXA25x)
#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-
#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index 0f381e6..d1fce8b 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -13,7 +13,6 @@
#include <asm/proc-fns.h>
#include "hardware.h"
#include "pxa2xx-regs.h"
-#include "pxa-regs.h"
static inline void arch_idle(void)
{
@@ -21,4 +20,4 @@
}
-void arch_reset(char mode);
+void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index f4b029c..5706cea 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -35,7 +35,8 @@
static inline void arch_decomp_setup(void)
{
- if (machine_is_littleton() || machine_is_intelmote2())
+ if (machine_is_littleton() || machine_is_intelmote2()
+ || machine_is_csb726())
UART = STUART;
}
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fa69c3a..f6e0300 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -20,7 +20,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
+#include <mach/regs-intc.h>
#include "generic.h"
@@ -51,6 +52,72 @@
.unmask = pxa_unmask_irq,
};
+/*
+ * GPIO IRQs for GPIO 0 and 1
+ */
+static int pxa_set_low_gpio_type(unsigned int irq, unsigned int type)
+{
+ int gpio = irq - IRQ_GPIO0;
+
+ if (__gpio_is_occupied(gpio)) {
+ pr_err("%s failed: GPIO is configured\n", __func__);
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ GRER0 |= GPIO_bit(gpio);
+ else
+ GRER0 &= ~GPIO_bit(gpio);
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ GFER0 |= GPIO_bit(gpio);
+ else
+ GFER0 &= ~GPIO_bit(gpio);
+
+ return 0;
+}
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+ GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static void pxa_mask_low_gpio(unsigned int irq)
+{
+ ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+}
+
+static void pxa_unmask_low_gpio(unsigned int irq)
+{
+ ICMR |= 1 << (irq - PXA_IRQ(0));
+}
+
+static struct irq_chip pxa_low_gpio_chip = {
+ .name = "GPIO-l",
+ .ack = pxa_ack_low_gpio,
+ .mask = pxa_mask_low_gpio,
+ .unmask = pxa_unmask_low_gpio,
+ .set_type = pxa_set_low_gpio_type,
+};
+
+static void __init pxa_init_low_gpio_irq(set_wake_t fn)
+{
+ int irq;
+
+ /* clear edge detection on GPIO 0 and 1 */
+ GFER0 &= ~0x3;
+ GRER0 &= ~0x3;
+ GEDR0 = 0x3;
+
+ for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+ set_irq_chip(irq, &pxa_low_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ pxa_low_gpio_chip.set_wake = fn;
+}
+
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
int irq;
@@ -72,6 +139,7 @@
}
pxa_internal_irq_chip.set_wake = fn;
+ pxa_init_low_gpio_irq(fn);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 18b20d4..8b9c171 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -18,7 +18,7 @@
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/idp.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index 1a25802..e26d5ef 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -16,7 +16,7 @@
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa25x.h>
#include <mach/lubbock.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 95e06b8..db4af5e 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -16,7 +16,7 @@
#include <asm/leds.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include "leds.h"
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 31da7f3..e13f6a8 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -39,8 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index de3f67d..d64395f 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -38,9 +38,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index bff7043..f04c833 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -41,15 +41,15 @@
#include <asm/hardware/sa1111.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
+#include <mach/gpio.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
+#include <mach/pm.h>
#include "generic.h"
#include "clock.h"
@@ -113,8 +113,14 @@
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
+#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+void lubbock_set_hexled(uint32_t value)
+{
+ LUB_HEXLED = value;
+}
+
void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
{
unsigned long flags;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 21b821e..d46b367 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -25,14 +25,14 @@
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
+#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
#include <mach/magician.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
@@ -66,6 +66,11 @@
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
+ /* SSP 1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+
/* SSP 2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
@@ -148,22 +153,31 @@
* GPIO Keys
*/
+#define INIT_KEY(_code, _gpio, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
static struct gpio_keys_button magician_button_table[] = {
- {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"},
- {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"},
- {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"},
- {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"},
- {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"},
- {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"},
- {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"},
- {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"},
- {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"},
- {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"},
- {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"},
- {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"},
- {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"},
- {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"},
- {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"},
+ INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
+ INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
+ INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
+ INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
+ INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
+ INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
+ INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
+ INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
+ INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
+ INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
+ INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
+ INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
+ INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
+ INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
+ INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
};
static struct gpio_keys_platform_data gpio_keys_data = {
@@ -189,7 +203,7 @@
static struct resource egpio_resources[] = {
[0] = {
.start = PXA_CS3_PHYS,
- .end = PXA_CS3_PHYS + 0x20,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -420,7 +434,7 @@
},
{
.name = "magician::phone_bl",
- .default_trigger = "none",
+ .default_trigger = "backlight",
.gpio = GPIO103_MAGICIAN_LED_KP,
},
};
@@ -468,8 +482,6 @@
},
};
-static struct platform_device pasic3;
-
static struct pasic3_leds_machinfo pasic3_leds_info = {
.num_leds = ARRAY_SIZE(pasic3_leds),
.power_gpio = EGPIO_MAGICIAN_LED_POWER,
@@ -511,6 +523,31 @@
};
/*
+ * USB "Transceiver"
+ */
+
+static struct resource gpio_vbus_resource = {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
+};
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &gpio_vbus_resource,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
+/*
* External power
*/
@@ -586,15 +623,17 @@
static struct resource power_supply_resources[] = {
[0] = {
.name = "ac",
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_AC,
- .end = IRQ_MAGICIAN_AC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
[1] = {
.name = "usb",
- .flags = IORESOURCE_IRQ,
- .start = IRQ_MAGICIAN_AC,
- .end = IRQ_MAGICIAN_AC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
};
@@ -688,11 +727,9 @@
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
-#define PXA_CS_SIZE 0x04000000
-
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
@@ -720,6 +757,7 @@
&egpio,
&backlight,
&pasic3,
+ &gpio_vbus,
&power_supply,
&strataflash,
&leds_gpio,
@@ -743,6 +781,7 @@
gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1);
pxa_set_ficp_info(&magician_ficp_info);
}
+ pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5f22496..a6c8429 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -41,9 +41,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
+#include <mach/gpio.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 33626de..7ffb91d 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,15 +18,12 @@
#include <linux/init.h>
#include <linux/sysdev.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/gpio.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
#include "generic.h"
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
#define PGSR(x) __REG2(0x40F00020, (x) << 2)
#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
#define GAFR_L(x) __GAFR(0, x)
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index eb197a6..7a270ee 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -20,183 +20,9 @@
#include <linux/sysdev.h>
#include <mach/hardware.h>
-#include <mach/mfp.h>
#include <mach/mfp-pxa3xx.h>
#include <mach/pxa3xx-regs.h>
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
-
-struct pxa3xx_mfp_pin {
- unsigned long config; /* -1 for not configured */
- unsigned long mfpr_off; /* MFPRxx Register offset */
- unsigned long mfpr_run; /* Run-Mode Register Value */
- unsigned long mfpr_lpm; /* Low Power Mode Register Value */
-};
-
-static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
- MFPR_LPM_INPUT,
- MFPR_LPM_DRIVE_LOW,
- MFPR_LPM_DRIVE_HIGH,
- MFPR_LPM_PULL_LOW,
- MFPR_LPM_PULL_HIGH,
- MFPR_LPM_FLOAT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
- MFPR_PULL_NONE,
- MFPR_PULL_LOW,
- MFPR_PULL_HIGH,
- MFPR_PULL_BOTH,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
- MFPR_EDGE_NONE,
- MFPR_EDGE_RISE,
- MFPR_EDGE_FALL,
- MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off) \
- __raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val) \
- __raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p) ((p)->config != -1)
-
-/*
- * perform a read-back of any MFPR register to make sure the
- * previous writings are finished
- */
-#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
-
-static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
-{
- if (mfp_configured(p))
- mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
-{
- if (mfp_configured(p)) {
- unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
- if (mfpr_clr != p->mfpr_run)
- mfpr_writel(p->mfpr_off, mfpr_clr);
- if (p->mfpr_lpm != mfpr_clr)
- mfpr_writel(p->mfpr_off, p->mfpr_lpm);
- }
-}
-
-void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
-{
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- for (i = 0; i < num; i++, mfp_cfgs++) {
- unsigned long tmp, c = *mfp_cfgs;
- struct pxa3xx_mfp_pin *p;
- int pin, af, drv, lpm, edge, pull;
-
- pin = MFP_PIN(c);
- BUG_ON(pin >= MFP_PIN_MAX);
- p = &mfp_table[pin];
-
- af = MFP_AF(c);
- drv = MFP_DS(c);
- lpm = MFP_LPM_STATE(c);
- edge = MFP_LPM_EDGE(c);
- pull = MFP_PULL(c);
-
- /* run-mode pull settings will conflict with MFPR bits of
- * low power mode state, calculate mfpr_run and mfpr_lpm
- * individually if pull != MFP_PULL_NONE
- */
- tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
- if (likely(pull == MFP_PULL_NONE)) {
- p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
- p->mfpr_lpm = p->mfpr_run;
- } else {
- p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
- p->mfpr_run = tmp | mfpr_pull[pull];
- }
-
- p->config = c; __mfp_config_run(p);
- }
-
- mfpr_sync();
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long pxa3xx_mfp_read(int mfp)
-{
- unsigned long val, flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
- val = mfpr_readl(mfp_table[mfp].mfpr_off);
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
- return val;
-}
-
-void pxa3xx_mfp_write(int mfp, unsigned long val)
-{
- unsigned long flags;
-
- BUG_ON(mfp >= MFP_PIN_MAX);
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
- mfpr_writel(mfp_table[mfp].mfpr_off, val);
- mfpr_sync();
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
-{
- struct pxa3xx_mfp_addr_map *p;
- unsigned long offset, flags;
- int i;
-
- spin_lock_irqsave(&mfp_spin_lock, flags);
-
- for (p = map; p->start != MFP_PIN_INVALID; p++) {
- offset = p->offset;
- i = p->start;
-
- do {
- mfp_table[i].mfpr_off = offset;
- mfp_table[i].mfpr_run = 0;
- mfp_table[i].mfpr_lpm = 0;
- offset += 4; i++;
- } while ((i <= p->end) && (p->end != -1));
- }
-
- spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init pxa3xx_init_mfp(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
- mfp_table[i].config = -1;
-}
-
#ifdef CONFIG_PM
/*
* Configure the MFPs appropriately for suspend/resume.
@@ -207,23 +33,13 @@
*/
static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
- int pin;
-
- for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
- struct pxa3xx_mfp_pin *p = &mfp_table[pin];
- __mfp_config_lpm(p);
- }
+ mfp_config_lpm();
return 0;
}
static int pxa3xx_mfp_resume(struct sys_device *d)
{
- int pin;
-
- for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) {
- struct pxa3xx_mfp_pin *p = &mfp_table[pin];
- __mfp_config_run(p);
- }
+ mfp_config_run();
/* clear RDH bit when MFP settings are restored
*
@@ -231,7 +47,6 @@
* preserve them here in case they will be referenced later
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
return 0;
}
#else
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2b427e0..97c93a7 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -36,13 +36,15 @@
#include <linux/power_supply.h>
#include <linux/wm97xx_batt.h>
#include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mfp-pxa27x.h>
+
+#include <mach/pxa27x.h>
+#include <mach/regs-rtc.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxafb.h>
-#include <mach/pxa2xx-regs.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
@@ -411,21 +413,6 @@
/*
* USB UDC
*/
-static void udc_power_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_DISCONNECT:
- gpio_set_value(GPIO22_USB_ENABLE, 0);
- break;
- case PXA2XX_UDC_CMD_CONNECT:
- gpio_set_value(GPIO22_USB_ENABLE, 1);
- break;
- default:
- printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
- break;
- }
-}
-
static int is_usb_connected(void)
{
return !gpio_get_value(GPIO13_nUSB_DETECT);
@@ -433,24 +420,15 @@
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
.udc_is_connected = is_usb_connected,
- .udc_command = udc_power_command,
+ .gpio_pullup = GPIO22_USB_ENABLE,
};
-struct gpio_ress udc_gpios[] = {
- MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+struct gpio_vbus_mach_info gpio_vbus_data = {
+ .gpio_vbus = GPIO13_nUSB_DETECT,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = -1,
};
-static int __init udc_init(void)
-{
- pxa_set_udc_info(&mioa701_udc_info);
- return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
-}
-
-static void udc_exit(void)
-{
- mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
-}
-
/*
* SDIO/MMC Card controller
*/
@@ -789,6 +767,7 @@
MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
@@ -800,7 +779,8 @@
&mioa701_sound,
&power_dev,
&strataflash,
- &mioa701_board
+ &gpio_vbus,
+ &mioa701_board,
};
static void mioa701_machine_exit(void);
@@ -808,13 +788,13 @@
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- arm_machine_restart('s');
+ arm_machine_restart('s', NULL);
}
-static void mioa701_restart(char c)
+static void mioa701_restart(char c, const char *cmd)
{
mioa701_machine_exit();
- arm_machine_restart('s');
+ arm_machine_restart('s', cmd);
}
struct gpio_ress global_gpios[] = {
@@ -837,7 +817,7 @@
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
- udc_init();
+ pxa_set_udc_info(&mioa701_udc_info);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -850,7 +830,6 @@
static void mioa701_machine_exit(void)
{
- udc_exit();
bootstrap_exit();
gsm_exit();
}
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 8a73814..a65713c 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -19,10 +19,10 @@
#include <linux/types.h>
#include <linux/usb/isp116x.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+
+#include <mach/pxa25x.h>
#include "generic.h"
static void isp116x_pfm_delay(struct device *dev, int delay)
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
new file mode 100644
index 0000000..8587477
--- /dev/null
+++ b/arch/arm/mach-pxa/palmld.c
@@ -0,0 +1,565 @@
+/*
+ * Hardware definitions for Palm LifeDrive
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmld.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmld_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO116_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO108_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* GPIO KEYS */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power switch */
+ GPIO15_GPIO, /* lock switch */
+
+ /* LEDs */
+ GPIO52_GPIO, /* green led */
+ GPIO94_GPIO, /* orange led */
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO36_GPIO, /* wifi power */
+ GPIO38_GPIO, /* wifi ready */
+ GPIO81_GPIO, /* wifi reset */
+
+ /* HDD */
+ GPIO95_GPIO, /* HDD irq */
+ GPIO115_GPIO, /* HDD power */
+
+ /* MISC */
+ GPIO13_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
+ palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMLD_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmld_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMLD_SD_READONLY);
+ gpio_free(GPIO_NR_PALMLD_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
+}
+
+static void palmld_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmld_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmld_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmld_mci_power,
+ .get_ro = palmld_mci_get_ro,
+ .init = palmld_mci_init,
+ .exit = palmld_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmld_matrix_keys[] = {
+ KEY(0, 1, KEY_F2),
+ KEY(0, 2, KEY_UP),
+
+ KEY(1, 0, KEY_F3),
+ KEY(1, 1, KEY_F4),
+ KEY(1, 2, KEY_RIGHT),
+
+ KEY(2, 0, KEY_F1),
+ KEY(2, 1, KEY_F5),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_F6),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmld_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmld_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmld_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+ {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
+ {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
+};
+
+static struct gpio_keys_platform_data palmld_pxa_keys_data = {
+ .buttons = palmld_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmld_pxa_buttons),
+};
+
+static struct platform_device palmld_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmld_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMLD_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmld_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmld_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_BL_POWER);
+ gpio_free(GPIO_NR_PALMLD_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmld_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMLD_MAX_INTENSITY,
+ .dft_brightness = PALMLD_MAX_INTENSITY,
+ .pwm_period_ns = PALMLD_PERIOD_NS,
+ .init = palmld_backlight_init,
+ .notify = palmld_backlight_notify,
+ .exit = palmld_backlight_exit,
+};
+
+static struct platform_device palmld_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmld_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmld_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmld_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
+}
+
+static void palmld_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmld_ficp_platform_data = {
+ .startup = palmld_irda_startup,
+ .shutdown = palmld_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmld_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+struct gpio_led gpio_leds[] = {
+{
+ .name = "palmld:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_GREEN,
+}, {
+ .name = "palmld:amber:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMLD_LED_AMBER,
+},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmld_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
+ if (ret)
+ goto err3;
+
+ return 0;
+
+err3:
+ gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+err2:
+ gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmld_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static int palmld_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
+}
+
+static char *palmld_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmld_is_ac_online,
+ .is_usb_online = palmld_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmld_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmld_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMLD_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMLD_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmld_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmld_lcd_screen = {
+ .modes = palmld_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmld_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmld_pxa_keys,
+#endif
+ &palmld_backlight,
+ &palmld_leds,
+ &power_supply,
+};
+
+static struct map_desc palmld_io_desc[] __initdata = {
+{
+ .virtual = PALMLD_IDE_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_IDE_PHYS),
+ .length = PALMLD_IDE_SIZE,
+ .type = MT_DEVICE
+},
+{
+ .virtual = PALMLD_USB_VIRT,
+ .pfn = __phys_to_pfn(PALMLD_USB_PHYS),
+ .length = PALMLD_USB_SIZE,
+ .type = MT_DEVICE
+},
+};
+
+static void __init palmld_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
+}
+
+static void __init palmld_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+
+ set_pxa_fb_info(&palmld_lcd_screen);
+ pxa_set_mci_info(&palmld_mci_platform_data);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmld_ficp_platform_data);
+ pxa_set_keypad_info(&palmld_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+ palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMLD, "Palm LifeDrive")
+ .phys_io = PALMLD_PHYS_IO_START,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = palmld_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmld_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
new file mode 100644
index 0000000..9521c7b
--- /dev/null
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -0,0 +1,496 @@
+/*
+ * Hardware definitions for Palm Tungsten|T5
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Ales Snuparek <snuparek@atlas.cz>
+ * Justin Kendrick <twilightsentry@gmail.com>
+ * RichardT5 <richard_t5@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/palmt5.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmt5_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO40_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* MISC */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO90_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
+ void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
+ palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMT5_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmt5_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMT5_SD_READONLY);
+ gpio_free(GPIO_NR_PALMT5_SD_POWER);
+ free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
+ gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
+}
+
+static void palmt5_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmt5_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmt5_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmt5_mci_power,
+ .get_ro = palmt5_mci_get_ro,
+ .init = palmt5_mci_init,
+ .exit = palmt5_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmt5_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmt5_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmt5_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
+ .buttons = palmt5_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmt5_pxa_buttons),
+};
+
+static struct platform_device palmt5_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmt5_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMT5_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmt5_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmt5_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_BL_POWER);
+ gpio_free(GPIO_NR_PALMT5_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmt5_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMT5_MAX_INTENSITY,
+ .dft_brightness = PALMT5_MAX_INTENSITY,
+ .pwm_period_ns = PALMT5_PERIOD_NS,
+ .init = palmt5_backlight_init,
+ .notify = palmt5_backlight_notify,
+ .exit = palmt5_backlight_exit,
+};
+
+static struct platform_device palmt5_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmt5_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmt5_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmt5_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
+}
+
+static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmt5_ficp_platform_data = {
+ .startup = palmt5_irda_startup,
+ .shutdown = palmt5_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmt5_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup_inverted = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+err2:
+ gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmt5_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
+}
+
+static char *palmt5_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmt5_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmt5_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmt5_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMT5_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMT5_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmt5_lcd_modes[] = {
+{
+ .pixclock = 57692,
+ .xres = 320,
+ .yres = 480,
+ .bpp = 16,
+
+ .left_margin = 32,
+ .right_margin = 1,
+ .upper_margin = 7,
+ .lower_margin = 1,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmt5_lcd_screen = {
+ .modes = palmt5_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmt5_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmt5_pxa_keys,
+#endif
+ &palmt5_backlight,
+ &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmt5_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ }
+}
+
+static void __init palmt5_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+
+ set_pxa_fb_info(&palmt5_lcd_screen);
+ pxa_set_mci_info(&palmt5_mci_platform_data);
+ palmt5_udc_init();
+ pxa_set_udc_info(&palmt5_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmt5_ficp_platform_data);
+ pxa_set_keypad_info(&palmt5_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+ palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMT5, "Palm Tungsten|T5")
+ .phys_io = PALMT5_PHYS_IO_START,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmt5_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index a9d94f5..b490c09 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -32,12 +32,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 2f730da..b88eb4d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,13 +33,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 36135a0..6abfa29 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,10 +29,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
+#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 34841c7..f46698e 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -31,13 +31,12 @@
#include <mach/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pcm990_baseboard.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa27x.h>
#include "devices.h"
#include "generic.h"
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 164eb0b..884b174 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -14,15 +14,8 @@
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/errno.h>
-#include <linux/time.h>
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/system.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
-#include <mach/lubbock.h>
-#include <asm/mach/time.h>
struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
static unsigned long *sleep_save;
@@ -57,9 +50,9 @@
/* if invalid, display message and wait for a hardware reset */
if (checksum != sleep_save_checksum) {
-#ifdef CONFIG_ARCH_LUBBOCK
- LUB_HEXLED = 0xbadbadc5;
-#endif
+
+ lubbock_set_hexled(0xbadbadc5);
+
while (1)
pxa_cpu_pm_fns->enter(state);
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f9093be..036bbde 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -36,9 +36,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
@@ -503,12 +501,12 @@
static void poodle_poweroff(void)
{
- arm_machine_restart('h');
+ arm_machine_restart('h', NULL);
}
-static void poodle_restart(char mode)
+static void poodle_restart(char mode, const char *cmd)
{
- arm_machine_restart('h');
+ arm_machine_restart('h', cmd);
}
static void __init poodle_init(void)
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index 3ca7ffc..fcdd374 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,6 @@
#include <linux/pwm.h>
#include <asm/div64.h>
-#include <mach/pxa-regs.h>
/* PWM registers and bits definitions */
#define PWMCR (0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6c57522..77c2693 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,9 +25,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include <mach/gpio.h>
+#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
@@ -310,14 +309,14 @@
void __init pxa25x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(85, pxa25x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
}
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(90, pxa25x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
}
#endif
@@ -355,7 +354,7 @@
clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
- if ((ret = pxa_init_dma(16)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
pxa25x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 411bec5..a425ec7 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -21,9 +21,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/gpio.h>
+#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
#include <mach/pm.h>
@@ -332,7 +331,7 @@
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(121, pxa27x_set_wake);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
/*
@@ -381,7 +380,7 @@
clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
- if ((ret = pxa_init_dma(32)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa27x_init_pm();
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 73d04d8..2f3394f 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -16,7 +16,6 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 83fb609..4ba6d21 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -17,15 +17,13 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
-static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
MFP_ADDR_X(GPIO3, GPIO26, 0x027c),
@@ -74,7 +72,7 @@
};
/* override pxa300 MFP register addresses */
-static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO30, GPIO98, 0x0418),
MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
@@ -100,13 +98,13 @@
static int __init pxa300_init(void)
{
if (cpu_is_pxa300() || cpu_is_pxa310()) {
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa300_mfp_addr_map);
clks_register(ARRAY_AND_SIZE(common_clkregs));
}
if (cpu_is_pxa310()) {
- pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+ mfp_init_addr(pxa310_mfp_addr_map);
clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
}
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 36f0661..8b3d97e 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -17,16 +17,13 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
-static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO4, 0x0124),
MFP_ADDR_X(GPIO5, GPIO9, 0x028C),
@@ -89,8 +86,8 @@
static int __init pxa320_init(void)
{
if (cpu_is_pxa320()) {
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa320_mfp_addr_map);
clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4908938..b02d454 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -23,6 +23,7 @@
#include <linux/sysdev.h>
#include <mach/hardware.h>
+#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
@@ -538,7 +539,7 @@
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
pxa_init_irq(56, pxa3xx_set_wake);
- pxa_init_gpio(128, NULL);
+ pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
/*
@@ -594,7 +595,7 @@
clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
- if ((ret = pxa_init_dma(32)))
+ if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa3xx_init_pm();
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 13e6bfd..7113174 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -16,10 +16,9 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/mfp-pxa930.h>
+#include <mach/pxa930.h>
-static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
MFP_ADDR(GPIO0, 0x02e0),
MFP_ADDR(GPIO1, 0x02dc),
@@ -180,8 +179,8 @@
static int __init pxa930_init(void)
{
if (cpu_is_pxa930()) {
- pxa3xx_init_mfp();
- pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+ mfp_init_base(io_p2v(MFPR_BASE));
+ mfp_init_addr(pxa930_mfp_addr_map);
}
return 0;
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 00b2dc2..df29d45 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -10,7 +10,7 @@
#include <linux/io.h>
#include <asm/proc-fns.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
#include <mach/reset.h>
unsigned int reset_status;
@@ -81,7 +81,7 @@
OSMR3 = OSCR + 368640; /* ... in 100 ms */
}
-void arch_reset(char mode)
+void arch_reset(char mode, const char *cmd)
{
clear_reset_status(RESET_STATUS_ALL);
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 5d02a73..ff82399 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -25,11 +25,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
#include <mach/i2c.h>
-#include <mach/regs-lcd.h>
#include <mach/pxafb.h>
#include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index f0845c1..16b4ec6 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -25,7 +25,6 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/pm.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/sharpsl.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index a62c837..2ed95f3 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -15,7 +15,6 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 6d447c9..7a0a430 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -44,9 +44,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
#include <mach/i2c.h>
@@ -703,10 +701,10 @@
static void spitz_poweroff(void)
{
- arm_machine_restart('g');
+ arm_machine_restart('g', NULL);
}
-static void spitz_restart(char mode)
+static void spitz_restart(char mode, const char *cmd)
{
/* Bootloader magic for a reboot */
if((MSC0 & 0xffff0000) == 0x7ff00000)
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 072e77c..2e44905 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -24,7 +24,6 @@
#include <mach/sharpsl.h>
#include <mach/spitz.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 6f42004..965e38c 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -33,7 +33,6 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
#define TIMEOUT 100000
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index f3821cf..29f5f5c 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -13,7 +13,6 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
.text
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 58ef08a..b75353a 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -22,9 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa930.h>
+
+#include <mach/pxa930.h>
#include <mach/pxafb.h>
#include <mach/pxa27x_keypad.h>
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 95656a7..8eb3830 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,8 +22,7 @@
#include <asm/div64.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
/*
* This is PXA's sched_clock implementation. This has a resolution
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 3332e5d..6e8ade6 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -36,8 +36,8 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+
+#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
#include <mach/i2c.h>
@@ -876,10 +876,10 @@
static void tosa_poweroff(void)
{
- arm_machine_restart('g');
+ arm_machine_restart('g', NULL);
}
-static void tosa_restart(char mode)
+static void tosa_restart(char mode, const char *cmd)
{
/* Bootloader magic for a reboot */
if((MSC0 & 0xffff0000) == 0x7ff00000)
@@ -919,7 +919,7 @@
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
- clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+ clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index a72e3ad..f79c9cb 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -39,10 +39,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 4b3120d..0e65344 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -42,12 +42,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/bitfield.h>
+#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/mfp-pxa25x.h>
#include <mach/i2c.h>
#include <mach/viper.h>
@@ -956,7 +953,7 @@
},
{
.virtual = VIPER_PC104IO_BASE,
- .pfn = __phys_to_pfn(_PCMCIA1IO),
+ .pfn = __phys_to_pfn(0x30000000),
.length = 0x00800000,
.type = MT_DEVICE,
},
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 4653888..c1f7320 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,9 +18,9 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/gpio.h>
-#include <asm/gpio.h>
-#include <mach/mfp-pxa300.h>
+#include <mach/pxa300.h>
#include <mach/i2c.h>
#include <mach/zylonite.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 28e4e62..4e1c488 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
-#include <mach/mfp-pxa320.h>
+#include <mach/pxa320.h>
#include <mach/zylonite.h>
#include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ad91185..b6ec106 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -35,6 +35,7 @@
bool "Support RealView/PB11MPCore platform"
select CPU_V6
select ARM_GIC
+ select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView MPCore Platform Baseboard.
PB11MPCore is a platform with an on-board ARM11MPCore and has
@@ -51,6 +52,7 @@
bool "Support RealView/PB-A8 platform"
select CPU_V7
select ARM_GIC
+ select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
PB-A8 is a platform with an on-board Cortex-A8 and has support for
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index bd2aa4f..d676668 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,6 +29,7 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/smc911x.h>
+#include <linux/ata_platform.h>
#include <asm/clkdev.h>
#include <asm/system.h>
@@ -150,6 +151,44 @@
return platform_device_register(&realview_eth_device);
}
+struct platform_device realview_usb_device = {
+ .name = "isp1760",
+ .num_resources = 2,
+};
+
+int realview_usb_register(struct resource *res)
+{
+ realview_usb_device.resource = res;
+ return platform_device_register(&realview_usb_device);
+}
+
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = 1,
+};
+
+static struct resource pata_resources[] = {
+ [0] = {
+ .start = REALVIEW_CF_BASE,
+ .end = REALVIEW_CF_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_CF_BASE + 0x100,
+ .end = REALVIEW_CF_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device realview_cf_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pata_resources),
+ .resource = pata_resources,
+ .dev = {
+ .platform_data = &pata_platform_data,
+ },
+};
+
static struct resource realview_i2c_resource = {
.start = REALVIEW_I2C_BASE,
.end = REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -158,11 +197,25 @@
struct platform_device realview_i2c_device = {
.name = "versatile-i2c",
- .id = -1,
+ .id = 0,
.num_resources = 1,
.resource = &realview_i2c_resource,
};
+static struct i2c_board_info realview_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+ .type = "ds1338",
+ },
+};
+
+static int __init realview_i2c_init(void)
+{
+ return i2c_register_board_info(0, realview_i2c_board_info,
+ ARRAY_SIZE(realview_i2c_board_info));
+}
+arch_initcall(realview_i2c_init);
+
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 44269b1..21c0863 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -45,6 +45,7 @@
}
extern struct platform_device realview_flash_device;
+extern struct platform_device realview_cf_device;
extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
@@ -62,5 +63,6 @@
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
+extern int realview_usb_register(struct resource *res);
#endif
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index c8bed8f..307f97b 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -45,8 +45,6 @@
#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
-#define REALVIEW_PBA8_CF_BASE 0x18000000 /* Compact flash */
-#define REALVIEW_PBA8_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */
#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 793a3a3..c8f5083 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -204,6 +204,12 @@
#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
/*
+ * CompactFlash
+ */
+#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */
+#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */
+
+/*
* Disk on Chip
*/
#define REALVIEW_DOC_BASE 0x2C000000
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index a2f61c7..1a15a44 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -34,7 +34,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
unsigned int val;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index bed39ed..c20fbef 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -264,6 +264,19 @@
return realview_eth_register(name, realview_eb_eth_resources);
}
+static struct resource realview_eb_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_EB_USB_BASE,
+ .end = REALVIEW_EB_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EB_USB,
+ .end = IRQ_EB_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static void __init gic_init_irq(void)
{
if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -323,6 +336,8 @@
/* platform devices */
realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH;
realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH;
+ realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB;
+ realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB;
}
static void __init realview_eb_timer_init(void)
@@ -366,6 +381,7 @@
realview_flash_register(&realview_eb_flash_resource, 1);
platform_device_register(&realview_i2c_device);
eth_device_register();
+ realview_usb_register(realview_eb_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 8f0683c..a64b84a 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -222,6 +222,19 @@
},
};
+static struct resource realview_pb1176_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_PB1176_USB_BASE,
+ .end = REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PB1176_USB,
+ .end = IRQ_PB1176_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
@@ -260,6 +273,8 @@
realview_flash_register(&realview_pb1176_flash_resource, 1);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
+ platform_device_register(&realview_i2c_device);
+ realview_usb_register(realview_pb1176_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3ebdb2d..ea1e60e 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -230,31 +230,19 @@
},
};
-struct resource realview_pb11mp_cf_resources[] = {
+static struct resource realview_pb11mp_isp1761_resources[] = {
[0] = {
- .start = REALVIEW_PB11MP_CF_BASE,
- .end = REALVIEW_PB11MP_CF_BASE + SZ_4K - 1,
+ .start = REALVIEW_PB11MP_USB_BASE,
+ .end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = REALVIEW_PB11MP_CF_MEM_BASE,
- .end = REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = -1, /* FIXME: Find correct irq */
- .end = -1,
+ .start = IRQ_TC11MP_USB,
+ .end = IRQ_TC11MP_USB,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device realview_pb11mp_cf_device = {
- .name = "compactflash",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pb11mp_cf_resources),
- .resource = realview_pb11mp_cf_resources,
-};
-
static void __init gic_init_irq(void)
{
unsigned int pldctrl;
@@ -308,7 +296,8 @@
ARRAY_SIZE(realview_pb11mp_flash_resource));
realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
platform_device_register(&realview_i2c_device);
- platform_device_register(&realview_pb11mp_cf_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pb11mp_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 34c9443..d6ac1eb 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -221,31 +221,19 @@
},
};
-struct resource realview_pba8_cf_resources[] = {
+static struct resource realview_pba8_isp1761_resources[] = {
[0] = {
- .start = REALVIEW_PBA8_CF_BASE,
- .end = REALVIEW_PBA8_CF_BASE + SZ_4K - 1,
+ .start = REALVIEW_PBA8_USB_BASE,
+ .end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = REALVIEW_PBA8_CF_MEM_BASE,
- .end = REALVIEW_PBA8_CF_MEM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = -1, /* FIXME: Find correct irq */
- .end = -1,
+ .start = IRQ_PBA8_USB,
+ .end = IRQ_PBA8_USB,
.flags = IORESOURCE_IRQ,
},
};
-struct platform_device realview_pba8_cf_device = {
- .name = "compactflash",
- .id = 0,
- .num_resources = ARRAY_SIZE(realview_pba8_cf_resources),
- .resource = realview_pba8_cf_resources,
-};
-
static void __init gic_init_irq(void)
{
/* ARM PB-A8 on-board GIC */
@@ -276,7 +264,8 @@
ARRAY_SIZE(realview_pba8_flash_resource));
realview_eth_register(NULL, realview_pba8_smsc911x_resources);
platform_device_register(&realview_i2c_device);
- platform_device_register(&realview_pba8_cf_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pba8_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 7958a30..c47d974 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -26,6 +26,16 @@
#include <asm/mach/dma.h>
#include <asm/hardware/iomd.h>
+struct iomd_dma {
+ struct dma_struct dma;
+ unsigned int state;
+ unsigned long base; /* Controller base address */
+ int irq; /* Controller IRQ */
+ struct scatterlist cur_sg; /* Current controller buffer */
+ dma_addr_t dma_addr;
+ unsigned int dma_len;
+};
+
#if 0
typedef enum {
dma_size_8 = 1,
@@ -44,15 +54,15 @@
#define CR (IOMD_IO0CR - IOMD_IO0CURA)
#define ST (IOMD_IO0ST - IOMD_IO0CURA)
-static void iomd_get_next_sg(struct scatterlist *sg, dma_t *dma)
+static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
{
unsigned long end, offset, flags = 0;
- if (dma->sg) {
- sg->dma_address = dma->sg->dma_address;
+ if (idma->dma.sg) {
+ sg->dma_address = idma->dma_addr;
offset = sg->dma_address & ~PAGE_MASK;
- end = offset + dma->sg->length;
+ end = offset + idma->dma_len;
if (end > PAGE_SIZE)
end = PAGE_SIZE;
@@ -62,15 +72,17 @@
sg->length = end - TRANSFER_SIZE;
- dma->sg->length -= end - offset;
- dma->sg->dma_address += end - offset;
+ idma->dma_len -= end - offset;
+ idma->dma_addr += end - offset;
- if (dma->sg->length == 0) {
- if (dma->sgcount > 1) {
- dma->sg++;
- dma->sgcount--;
+ if (idma->dma_len == 0) {
+ if (idma->dma.sgcount > 1) {
+ idma->dma.sg = sg_next(idma->dma.sg);
+ idma->dma_addr = idma->dma.sg->dma_address;
+ idma->dma_len = idma->dma.sg->length;
+ idma->dma.sgcount--;
} else {
- dma->sg = NULL;
+ idma->dma.sg = NULL;
flags |= DMA_END_S;
}
}
@@ -85,8 +97,8 @@
static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
{
- dma_t *dma = (dma_t *)dev_id;
- unsigned long base = dma->dma_base;
+ struct iomd_dma *idma = dev_id;
+ unsigned long base = idma->base;
do {
unsigned int status;
@@ -95,93 +107,99 @@
if (!(status & DMA_ST_INT))
return IRQ_HANDLED;
- if ((dma->state ^ status) & DMA_ST_AB)
- iomd_get_next_sg(&dma->cur_sg, dma);
+ if ((idma->state ^ status) & DMA_ST_AB)
+ iomd_get_next_sg(&idma->cur_sg, idma);
switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
case DMA_ST_OFL: /* OIA */
case DMA_ST_AB: /* .IB */
- iomd_writel(dma->cur_sg.dma_address, base + CURA);
- iomd_writel(dma->cur_sg.length, base + ENDA);
- dma->state = DMA_ST_AB;
+ iomd_writel(idma->cur_sg.dma_address, base + CURA);
+ iomd_writel(idma->cur_sg.length, base + ENDA);
+ idma->state = DMA_ST_AB;
break;
case DMA_ST_OFL | DMA_ST_AB: /* OIB */
case 0: /* .IA */
- iomd_writel(dma->cur_sg.dma_address, base + CURB);
- iomd_writel(dma->cur_sg.length, base + ENDB);
- dma->state = 0;
+ iomd_writel(idma->cur_sg.dma_address, base + CURB);
+ iomd_writel(idma->cur_sg.length, base + ENDB);
+ idma->state = 0;
break;
}
if (status & DMA_ST_OFL &&
- dma->cur_sg.length == (DMA_END_S|DMA_END_L))
+ idma->cur_sg.length == (DMA_END_S|DMA_END_L))
break;
} while (1);
- dma->state = ~DMA_ST_AB;
+ idma->state = ~DMA_ST_AB;
disable_irq(irq);
return IRQ_HANDLED;
}
-static int iomd_request_dma(dmach_t channel, dma_t *dma)
+static int iomd_request_dma(unsigned int chan, dma_t *dma)
{
- return request_irq(dma->dma_irq, iomd_dma_handle,
- IRQF_DISABLED, dma->device_id, dma);
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+ return request_irq(idma->irq, iomd_dma_handle,
+ IRQF_DISABLED, idma->dma.device_id, idma);
}
-static void iomd_free_dma(dmach_t channel, dma_t *dma)
+static void iomd_free_dma(unsigned int chan, dma_t *dma)
{
- free_irq(dma->dma_irq, dma);
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+ free_irq(idma->irq, idma);
}
-static void iomd_enable_dma(dmach_t channel, dma_t *dma)
+static void iomd_enable_dma(unsigned int chan, dma_t *dma)
{
- unsigned long dma_base = dma->dma_base;
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+ unsigned long dma_base = idma->base;
unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
- if (dma->invalid) {
- dma->invalid = 0;
+ if (idma->dma.invalid) {
+ idma->dma.invalid = 0;
/*
* Cope with ISA-style drivers which expect cache
* coherence.
*/
- if (!dma->sg) {
- dma->sg = &dma->buf;
- dma->sgcount = 1;
- dma->buf.length = dma->count;
- dma->buf.dma_address = dma_map_single(NULL,
- dma->addr, dma->count,
- dma->dma_mode == DMA_MODE_READ ?
+ if (!idma->dma.sg) {
+ idma->dma.sg = &idma->dma.buf;
+ idma->dma.sgcount = 1;
+ idma->dma.buf.length = idma->dma.count;
+ idma->dma.buf.dma_address = dma_map_single(NULL,
+ idma->dma.addr, idma->dma.count,
+ idma->dma.dma_mode == DMA_MODE_READ ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
iomd_writeb(DMA_CR_C, dma_base + CR);
- dma->state = DMA_ST_AB;
+ idma->state = DMA_ST_AB;
}
-
- if (dma->dma_mode == DMA_MODE_READ)
+
+ if (idma->dma.dma_mode == DMA_MODE_READ)
ctrl |= DMA_CR_D;
iomd_writeb(ctrl, dma_base + CR);
- enable_irq(dma->dma_irq);
+ enable_irq(idma->irq);
}
-static void iomd_disable_dma(dmach_t channel, dma_t *dma)
+static void iomd_disable_dma(unsigned int chan, dma_t *dma)
{
- unsigned long dma_base = dma->dma_base;
+ struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+ unsigned long dma_base = idma->base;
unsigned long flags;
local_irq_save(flags);
- if (dma->state != ~DMA_ST_AB)
- disable_irq(dma->dma_irq);
+ if (idma->state != ~DMA_ST_AB)
+ disable_irq(idma->irq);
iomd_writeb(0, dma_base + CR);
local_irq_restore(flags);
}
-static int iomd_set_dma_speed(dmach_t channel, dma_t *dma, int cycle)
+static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
{
int tcr, speed;
@@ -197,7 +215,7 @@
tcr = iomd_readb(IOMD_DMATCR);
speed &= 3;
- switch (channel) {
+ switch (chan) {
case DMA_0:
tcr = (tcr & ~0x03) | speed;
break;
@@ -236,16 +254,22 @@
.name = "floppydma"
};
-static void floppy_enable_dma(dmach_t channel, dma_t *dma)
+struct floppy_dma {
+ struct dma_struct dma;
+ unsigned int fiq;
+};
+
+static void floppy_enable_dma(unsigned int chan, dma_t *dma)
{
+ struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
void *fiqhandler_start;
unsigned int fiqhandler_length;
struct pt_regs regs;
- if (dma->sg)
+ if (fdma->dma.sg)
BUG();
- if (dma->dma_mode == DMA_MODE_READ) {
+ if (fdma->dma.dma_mode == DMA_MODE_READ) {
extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
fiqhandler_start = &floppy_fiqin_start;
fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
@@ -255,8 +279,8 @@
fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
}
- regs.ARM_r9 = dma->count;
- regs.ARM_r10 = (unsigned long)dma->addr;
+ regs.ARM_r9 = fdma->dma.count;
+ regs.ARM_r10 = (unsigned long)fdma->dma.addr;
regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE;
if (claim_fiq(&fh)) {
@@ -266,16 +290,17 @@
set_fiq_handler(fiqhandler_start, fiqhandler_length);
set_fiq_regs(®s);
- enable_fiq(dma->dma_irq);
+ enable_fiq(fdma->fiq);
}
-static void floppy_disable_dma(dmach_t channel, dma_t *dma)
+static void floppy_disable_dma(unsigned int chan, dma_t *dma)
{
- disable_fiq(dma->dma_irq);
+ struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+ disable_fiq(fdma->fiq);
release_fiq(&fh);
}
-static int floppy_get_residue(dmach_t channel, dma_t *dma)
+static int floppy_get_residue(unsigned int chan, dma_t *dma)
{
struct pt_regs regs;
get_fiq_regs(®s);
@@ -292,7 +317,7 @@
/*
* This is virtual DMA - we don't need anything here.
*/
-static void sound_enable_disable_dma(dmach_t channel, dma_t *dma)
+static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
{
}
@@ -302,8 +327,24 @@
.disable = sound_enable_disable_dma,
};
-void __init arch_dma_init(dma_t *dma)
+static struct iomd_dma iomd_dma[6];
+
+static struct floppy_dma floppy_dma = {
+ .dma = {
+ .d_ops = &floppy_dma_ops,
+ },
+ .fiq = FIQ_FLOPPYDATA,
+};
+
+static dma_t sound_dma = {
+ .d_ops = &sound_dma_ops,
+};
+
+static int __init rpc_dma_init(void)
{
+ unsigned int i;
+ int ret;
+
iomd_writeb(0, IOMD_IO0CR);
iomd_writeb(0, IOMD_IO1CR);
iomd_writeb(0, IOMD_IO2CR);
@@ -311,31 +352,39 @@
iomd_writeb(0xa0, IOMD_DMATCR);
- dma[DMA_0].dma_base = IOMD_IO0CURA;
- dma[DMA_0].dma_irq = IRQ_DMA0;
- dma[DMA_0].d_ops = &iomd_dma_ops;
- dma[DMA_1].dma_base = IOMD_IO1CURA;
- dma[DMA_1].dma_irq = IRQ_DMA1;
- dma[DMA_1].d_ops = &iomd_dma_ops;
- dma[DMA_2].dma_base = IOMD_IO2CURA;
- dma[DMA_2].dma_irq = IRQ_DMA2;
- dma[DMA_2].d_ops = &iomd_dma_ops;
- dma[DMA_3].dma_base = IOMD_IO3CURA;
- dma[DMA_3].dma_irq = IRQ_DMA3;
- dma[DMA_3].d_ops = &iomd_dma_ops;
- dma[DMA_S0].dma_base = IOMD_SD0CURA;
- dma[DMA_S0].dma_irq = IRQ_DMAS0;
- dma[DMA_S0].d_ops = &iomd_dma_ops;
- dma[DMA_S1].dma_base = IOMD_SD1CURA;
- dma[DMA_S1].dma_irq = IRQ_DMAS1;
- dma[DMA_S1].d_ops = &iomd_dma_ops;
- dma[DMA_VIRTUAL_FLOPPY].dma_irq = FIQ_FLOPPYDATA;
- dma[DMA_VIRTUAL_FLOPPY].d_ops = &floppy_dma_ops;
- dma[DMA_VIRTUAL_SOUND].d_ops = &sound_dma_ops;
-
/*
* Setup DMA channels 2,3 to be for podules
* and channels 0,1 for internal devices
*/
iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
+
+ iomd_dma[DMA_0].base = IOMD_IO0CURA;
+ iomd_dma[DMA_0].irq = IRQ_DMA0;
+ iomd_dma[DMA_1].base = IOMD_IO1CURA;
+ iomd_dma[DMA_1].irq = IRQ_DMA1;
+ iomd_dma[DMA_2].base = IOMD_IO2CURA;
+ iomd_dma[DMA_2].irq = IRQ_DMA2;
+ iomd_dma[DMA_3].base = IOMD_IO3CURA;
+ iomd_dma[DMA_3].irq = IRQ_DMA3;
+ iomd_dma[DMA_S0].base = IOMD_SD0CURA;
+ iomd_dma[DMA_S0].irq = IRQ_DMAS0;
+ iomd_dma[DMA_S1].base = IOMD_SD1CURA;
+ iomd_dma[DMA_S1].irq = IRQ_DMAS1;
+
+ for (i = DMA_0; i <= DMA_S1; i++) {
+ iomd_dma[i].dma.d_ops = &iomd_dma_ops;
+
+ ret = isa_dma_add(i, &iomd_dma[i].dma);
+ if (ret)
+ printk("IOMDDMA%u: unable to register: %d\n", i, ret);
+ }
+
+ ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
+ if (ret)
+ printk("IOMDFLOPPY: unable to register: %d\n", ret);
+ ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
+ if (ret)
+ printk("IOMDSOUND: unable to register: %d\n", ret);
+ return 0;
}
+core_initcall(rpc_dma_init);
diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
index bad7205..67bfc67 100644
--- a/arch/arm/mach-rpc/include/mach/isa-dma.h
+++ b/arch/arm/mach-rpc/include/mach/isa-dma.h
@@ -23,5 +23,7 @@
#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY
+#define IOMD_DMA_BOUNDARY (PAGE_SIZE - 1)
+
#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index bd7268b..45c7b93 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -16,7 +16,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
iomd_writeb(0, IOMD_ROMCR0);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
new file mode 100644
index 0000000..ce1ec69
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO bank numbering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA (32*0)
+#define S3C2410_GPIO_BANKB (32*1)
+#define S3C2410_GPIO_BANKC (32*2)
+#define S3C2410_GPIO_BANKD (32*3)
+#define S3C2410_GPIO_BANKE (32*4)
+#define S3C2410_GPIO_BANKF (32*5)
+#define S3C2410_GPIO_BANKG (32*6)
+#define S3C2410_GPIO_BANKH (32*7)
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 00476a5..51a88cf 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -23,3 +23,6 @@
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#include <asm-generic/gpio.h>
+#include <mach/gpio-nrs.h>
+
+#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 49efce8..2a2384f 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -80,7 +80,7 @@
#define IRQ_EINT22 S3C2410_IRQ(50)
#define IRQ_EINT23 S3C2410_IRQ(51)
-
+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
#define IRQ_LCD_FIFO S3C2410_IRQ(52)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 3210776..35a03df 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -14,16 +14,7 @@
#ifndef __ASM_ARCH_REGS_GPIO_H
#define __ASM_ARCH_REGS_GPIO_H
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKA (32*0)
-#define S3C2410_GPIO_BANKB (32*1)
-#define S3C2410_GPIO_BANKC (32*2)
-#define S3C2410_GPIO_BANKD (32*3)
-#define S3C2410_GPIO_BANKE (32*4)
-#define S3C2410_GPIO_BANKF (32*5)
-#define S3C2410_GPIO_BANKG (32*6)
-#define S3C2410_GPIO_BANKH (32*7)
+#include <mach/gpio-nrs.h>
#ifdef CONFIG_CPU_S3C2400
#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index 7613d0a..b8687f7 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -22,7 +22,7 @@
extern void (*s3c24xx_reset_hook)(void);
static void
-arch_reset(char mode)
+arch_reset(char mode, const char *cmd)
{
struct clk *wdtclk;
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 821a166..7a7c4da 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -203,7 +203,7 @@
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
- s3c2410_pm_init();
+ s3c_pm_init();
}
static void __init h1940_init_irq(void)
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9678a53..9f1ba9b 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -355,7 +355,7 @@
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
- s3c2410_pm_init();
+ s3c_pm_init();
}
MACHINE_START(QT2410, "QT2410")
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index a6970f6..87fc481 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -37,21 +37,14 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
static void s3c2410_pm_prepare(void)
{
/* ensure at least GSTATUS3 has the resume address */
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3);
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+ S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
if (machine_is_h1940()) {
void *base = phys_to_virt(H1940_SUSPEND_CHECK);
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index ecddbbb..72c266a 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -494,7 +494,7 @@
* correct address to resume from. */
__raw_writel(0x2BED, S3C2412_INFORM0);
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
return 0;
}
@@ -630,7 +630,7 @@
/* initialise the power management now we've setup everything. */
- s3c2410_pm_init();
+ s3c_pm_init();
s3c_device_nand.dev.platform_data = &jive_nand_info;
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 217e9e4..c9cfe40 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -85,7 +85,7 @@
static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
{
- s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
return 0;
}
@@ -98,7 +98,7 @@
tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
__raw_writel(tmp, S3C2412_PWRCFG);
- s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
return 0;
}
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 12d378f..bc8d8d1 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -203,7 +203,7 @@
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
- s3c2410_pm_init();
+ s3c_pm_init();
s3c24xx_fb_set_platdata(&rx3715_fb_info);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h
index ae8c0e3..83ce2a7 100644
--- a/arch/arm/mach-s3c24a0/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h
@@ -70,6 +70,8 @@
#define IRQ_EINT17 S3C2410_IRQ(49)
#define IRQ_EINT18 S3C2410_IRQ(50)
+#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00)
+
/* SUB IRQS */
#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */
#define IRQ_S3CUART_TX0 S3C2410_IRQ(52)
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 652bbc4..090cfd9 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -16,7 +16,7 @@
/* nothing here yet */
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
/* nothing here yet */
}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index f99d901..81ffff7 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,19 +71,9 @@
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
-config SA1100_H3800
- bool "Compaq iPAQ H3800"
- help
- Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
- series handheld computer. Information about this machine and the
- Linux port to this machine can be found at:
-
- <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
- <http://www.compaq.com/products/handhelds/pocketpc/>
-
config SA1100_H3XXX
bool
- depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
+ depends on SA1100_H3100 || SA1100_H3600
default y
config SA1100_BADGE4
@@ -157,15 +147,6 @@
This isn't for audio support, but for attached sensors and
other devices, eg for BadgePAD 4 sensor support.
-config H3600_SLEEVE
- tristate "Compaq iPAQ Handheld sleeve support"
- depends on SA1100_H3100 || SA1100_H3600
- help
- Choose this option to enable support for extension packs (sleeves)
- for the Compaq iPAQ H3XXX series of handheld computers. This option
- is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
- packs.
-
endmenu
endif
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2052eb8..bbf2ebc 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -25,6 +25,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -145,7 +146,8 @@
.remove = collie_uart_remove,
};
-static int __init collie_uart_init(void) {
+static int __init collie_uart_init(void)
+{
return locomo_driver_register(&collie_uart_driver);
}
device_initcall(collie_uart_init);
@@ -195,18 +197,34 @@
}
};
+static int collie_flash_init(void)
+{
+ int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+ if (rc)
+ return rc;
+
+ rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
+ if (rc)
+ gpio_free(COLLIE_GPIO_VPEN);
+
+ return rc;
+}
+
static void collie_set_vpp(int vpp)
{
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
- if (vpp)
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
- else
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+ gpio_set_value(COLLIE_GPIO_VPEN, vpp);
+}
+
+static void collie_flash_exit(void)
+{
+ gpio_free(COLLIE_GPIO_VPEN);
}
static struct flash_platform_data collie_flash_data = {
.map_name = "cfi_probe",
+ .init = collie_flash_init,
.set_vpp = collie_set_vpp,
+ .exit = collie_flash_exit,
.parts = collie_partitions,
.nr_parts = ARRAY_SIZE(collie_partitions),
};
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index b39307f..444f266 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -58,6 +59,9 @@
return;
}
+ gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
+ gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
+
ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
COLLIE_TC35143_GPIO_BBAT_ON);
return;
@@ -73,17 +77,11 @@
static void collie_charge(int on)
{
- extern struct platform_device colliescoop_device;
-
/* Zaurus seems to contain LTC1731; it should know when to
* stop charging itself, so setting charge on should be
* relatively harmless (as long as it is not done too often).
*/
- if (on) {
- set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
- } else {
- reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
- }
+ gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
}
static void collie_discharge(int on)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index af25a78..0eb2f15 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -42,19 +42,12 @@
#include <asm/mach/serial_sa1100.h>
#include <mach/h3600.h>
-
-#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
#include <mach/h3600_gpio.h>
-#endif
-
-#ifdef CONFIG_SA1100_H3800
-#include <mach/h3600_asic.h>
-#endif
#include "generic.h"
-struct ipaq_model_ops ipaq_model_ops;
-EXPORT_SYMBOL(ipaq_model_ops);
+void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
+EXPORT_SYMBOL(assign_h3600_egpio);
static struct mtd_partition h3xxx_partitions[] = {
{
@@ -63,41 +56,9 @@
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
-#ifdef CONFIG_MTD_2PARTS_IPAQ
- .name = "H3XXX root jffs2",
+ .name = "H3XXX rootfs",
.size = MTDPART_SIZ_FULL,
.offset = 0x00040000,
-#else
- .name = "H3XXX kernel",
- .size = 0x00080000,
- .offset = 0x00040000,
- }, {
- .name = "H3XXX params",
- .size = 0x00040000,
- .offset = 0x000C0000,
- }, {
-#ifdef CONFIG_JFFS2_FS
- .name = "H3XXX root jffs2",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00100000,
-#else
- .name = "H3XXX initrd",
- .size = 0x00100000,
- .offset = 0x00100000,
- }, {
- .name = "H3XXX root cramfs",
- .size = 0x00300000,
- .offset = 0x00200000,
- }, {
- .name = "H3XXX usr cramfs",
- .size = 0x00800000,
- .offset = 0x00500000,
- }, {
- .name = "H3XXX usr local",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00d00000,
-#endif
-#endif
}
};
@@ -131,11 +92,7 @@
static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
{
- if (speed < 4000000) {
- clr_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
- } else {
- set_h3600_egpio(IPAQ_EGPIO_IR_FSEL);
- }
+ assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
}
static struct irda_platform_data h3600_irda_data = {
@@ -266,12 +223,6 @@
sa1100fb_lcd_power = h3xxx_lcd_power;
}
-static __inline__ void do_blank(int setp)
-{
- if (ipaq_model_ops.blank_callback)
- ipaq_model_ops.blank_callback(1-setp);
-}
-
/************************* H3100 *************************/
#ifdef CONFIG_SA1100_H3100
@@ -289,7 +240,6 @@
case IPAQ_EGPIO_LCD_POWER:
egpio |= EGPIO_H3600_LCD_ON;
gpio |= GPIO_H3100_LCD_3V_ON;
- do_blank(setp);
break;
case IPAQ_EGPIO_LCD_ENABLE:
break;
@@ -343,25 +293,6 @@
}
}
-static unsigned long h3100_read_egpio(void)
-{
- return h3100_egpio;
-}
-
-static int h3100_pm_callback(int req)
-{
- if (ipaq_model_ops.pm_callback_aux)
- return ipaq_model_ops.pm_callback_aux(req);
- return 0;
-}
-
-static struct ipaq_model_ops h3100_model_ops __initdata = {
- .generic_name = "3100",
- .control = h3100_control_egpio,
- .read = h3100_read_egpio,
- .pm_callback = h3100_pm_callback
-};
-
#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
| GPIO_H3100_GPIO3 \
| GPIO_H3100_QMUTE \
@@ -387,7 +318,7 @@
GAFR &= ~H3100_DIRECT_EGPIO;
H3100_EGPIO = h3100_egpio;
- ipaq_model_ops = h3100_model_ops;
+ assign_h3600_egpio = h3100_control_egpio;
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
@@ -420,7 +351,6 @@
EGPIO_H3600_LCD_PCI |
EGPIO_H3600_LCD_5V_ON |
EGPIO_H3600_LVDD_ON;
- do_blank(setp);
break;
case IPAQ_EGPIO_LCD_ENABLE:
break;
@@ -471,25 +401,6 @@
}
}
-static unsigned long h3600_read_egpio(void)
-{
- return h3600_egpio;
-}
-
-static int h3600_pm_callback(int req)
-{
- if (ipaq_model_ops.pm_callback_aux)
- return ipaq_model_ops.pm_callback_aux(req);
- return 0;
-}
-
-static struct ipaq_model_ops h3600_model_ops __initdata = {
- .generic_name = "3600",
- .control = h3600_control_egpio,
- .read = h3600_read_egpio,
- .pm_callback = h3600_pm_callback
-};
-
static void __init h3600_map_io(void)
{
h3xxx_map_io();
@@ -504,7 +415,7 @@
GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
- ipaq_model_ops = h3600_model_ops;
+ assign_h3600_egpio = h3600_control_egpio;
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -519,388 +430,3 @@
#endif /* CONFIG_SA1100_H3600 */
-#ifdef CONFIG_SA1100_H3800
-
-#define SET_ASIC1(x) \
- do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0)
-
-#define SET_ASIC2(x) \
- do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0)
-
-#define CLEAR_ASIC1(x) \
- do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0)
-
-#define CLEAR_ASIC2(x) \
- do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0)
-
-
-/*
- On screen enable, we get
-
- h3800_video_power_on(1)
- LCD controller starts
- h3800_video_lcd_enable(1)
-
- On screen disable, we get
-
- h3800_video_lcd_enable(0)
- LCD controller stops
- h3800_video_power_on(0)
-*/
-
-
-static void h3800_video_power_on(int setp)
-{
- if (setp) {
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON;
- msleep(30);
- H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON;
- msleep(5);
- H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON;
- msleep(50);
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON;
- msleep(5);
- } else {
- msleep(5);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON;
- msleep(50);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON;
- msleep(5);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON;
- msleep(100);
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON;
- }
-}
-
-static void h3800_video_lcd_enable(int setp)
-{
- if (setp) {
- msleep(17); // Wait one from before turning on
- H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI;
- } else {
- H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI;
- msleep(30); // Wait before turning off
- }
-}
-
-
-static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- h3800_video_power_on(setp);
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- h3800_video_lcd_enable(setp);
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- case IPAQ_EGPIO_AUDIO_ON:
- case IPAQ_EGPIO_QMUTE:
- printk("%s: error - should not be called\n", __func__);
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- SET_ASIC2(GPIO2_OPT_ON_NVRAM);
- break;
- case IPAQ_EGPIO_OPT_ON:
- SET_ASIC2(GPIO2_OPT_ON);
- break;
- case IPAQ_EGPIO_CARD_RESET:
- SET_ASIC2(GPIO2_OPT_PCM_RESET);
- break;
- case IPAQ_EGPIO_OPT_RESET:
- SET_ASIC2(GPIO2_OPT_RESET);
- break;
- case IPAQ_EGPIO_IR_ON:
- CLEAR_ASIC1(GPIO1_IR_ON_N);
- break;
- case IPAQ_EGPIO_IR_FSEL:
- break;
- case IPAQ_EGPIO_RS232_ON:
- SET_ASIC1(GPIO1_RS232_ON);
- break;
- case IPAQ_EGPIO_VPP_ON:
- H3800_ASIC2_FlashWP_VPP_ON = setp;
- break;
- }
-}
-
-static unsigned long h3800_read_egpio(void)
-{
- return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16);
-}
-
-/* We need to fix ASIC2 GPIO over suspend/resume. At the moment,
- it doesn't appear that ASIC1 GPIO has the same problem */
-
-static int h3800_pm_callback(int req)
-{
- static u16 asic1_data;
- static u16 asic2_data;
- int result = 0;
-
- printk("%s %d\n", __func__, req);
-
- switch (req) {
- case PM_RESUME:
- MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */
-
- H3800_ASIC2_GPIOPIOD = asic2_data;
- H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
- | GPIO2_SD_DETECT
- | GPIO2_EAR_IN_N
- | GPIO2_USB_DETECT_N
- | GPIO2_SD_CON_SLT;
-
- H3800_ASIC1_GPIO_OUT = asic1_data;
-
- if (ipaq_model_ops.pm_callback_aux)
- result = ipaq_model_ops.pm_callback_aux(req);
- break;
-
- case PM_SUSPEND:
- if (ipaq_model_ops.pm_callback_aux &&
- ((result = ipaq_model_ops.pm_callback_aux(req)) != 0))
- return result;
-
- asic1_data = H3800_ASIC1_GPIO_OUT;
- asic2_data = H3800_ASIC2_GPIOPIOD;
- break;
- default:
- printk("%s: unrecognized PM callback\n", __func__);
- break;
- }
- return result;
-}
-
-static struct ipaq_model_ops h3800_model_ops __initdata = {
- .generic_name = "3800",
- .control = h3800_control_egpio,
- .read = h3800_read_egpio,
- .pm_callback = h3800_pm_callback
-};
-
-#define MAX_ASIC_ISR_LOOPS 20
-
-/* The order of these is important - see #include <mach/irqs.h> */
-static u32 kpio_irq_mask[] = {
- KPIO_KEY_ALL,
- KPIO_SPI_INT,
- KPIO_OWM_INT,
- KPIO_ADC_INT,
- KPIO_UART_0_INT,
- KPIO_UART_1_INT,
- KPIO_TIMER_0_INT,
- KPIO_TIMER_1_INT,
- KPIO_TIMER_2_INT
-};
-
-static u32 gpio_irq_mask[] = {
- GPIO2_PEN_IRQ,
- GPIO2_SD_DETECT,
- GPIO2_EAR_IN_N,
- GPIO2_USB_DETECT_N,
- GPIO2_SD_CON_SLT,
-};
-
-static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
-{
- int i;
-
- if (0) printk("%s: interrupt received\n", __func__);
-
- desc->chip->ack(irq);
-
- for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) {
- u32 irq;
- int j;
-
- /* KPIO */
- irq = H3800_ASIC2_KPIINTFLAG;
- if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
- for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
- if (irq & kpio_irq_mask[j])
- handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
-
- /* GPIO2 */
- irq = H3800_ASIC2_GPIINTFLAG;
- if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
- for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
- if (irq & gpio_irq_mask[j])
- handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
- }
-
- if (i >= MAX_ASIC_ISR_LOOPS)
- printk("%s: interrupt processing overrun\n", __func__);
-
- /* For level-based interrupts */
- desc->chip->unmask(irq);
-
-}
-
-static struct irqaction h3800_irq = {
- .name = "h3800_asic",
- .handler = h3800_IRQ_demux,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-u32 kpio_int_shadow = 0;
-
-
-/* mask_ack <- IRQ is first serviced.
- mask <- IRQ is disabled.
- unmask <- IRQ is enabled
-
- The INTCLR registers are poorly documented. I believe that writing
- a "1" to the register clears the specific interrupt, but the documentation
- indicates writing a "0" clears the interrupt. In any case, they shouldn't
- be read (that's the INTFLAG register)
- */
-
-static void h3800_mask_ack_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow &= ~mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
- H3800_ASIC2_KPIINTCLR = mask;
-}
-
-static void h3800_mask_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow &= ~mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_unmask_kpio_irq(unsigned int irq)
-{
- u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START];
- kpio_int_shadow |= mask;
- H3800_ASIC2_KPIINTSTAT = kpio_int_shadow;
-}
-
-static void h3800_mask_ack_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT &= ~mask;
- H3800_ASIC2_GPIINTCLR = mask;
-}
-
-static void h3800_mask_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT &= ~mask;
- }
-
-static void h3800_unmask_gpio_irq(unsigned int irq)
-{
- u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START];
- H3800_ASIC2_GPIINTSTAT |= mask;
-}
-
-static void __init h3800_init_irq(void)
-{
- int i;
-
- /* Initialize standard IRQs */
- sa1100_init_irq();
-
- /* Disable all IRQs and set up clock */
- H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */
- H3800_ASIC2_GPIINTSTAT = 0;
-
- H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */
- H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */
-
-// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */
-// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */
-
- H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */
- H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET;
- H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET;
- H3800_ASIC2_INTR_TimerSet = 1;
-
-#if 0
- for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) {
- int irq = i + H3800_KPIO_IRQ_START;
- irq_desc[irq].valid = 1;
- irq_desc[irq].probe_ok = 1;
- set_irq_chip(irq, &h3800_kpio_irqchip);
- }
-
- for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) {
- int irq = i + H3800_GPIO_IRQ_START;
- irq_desc[irq].valid = 1;
- irq_desc[irq].probe_ok = 1;
- set_irq_chip(irq, &h3800_gpio_irqchip);
- }
-#endif
- set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
- set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
-}
-
-
-#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */
-
-static void __init h3800_map_io(void)
-{
- h3xxx_map_io();
-
- /* Add wakeup on AC plug/unplug */
- PWER |= PWER_GPIO12;
-
- /* Initialize h3800-specific values here */
- GPCR = 0x0fffffff; /* All outputs are set low by default */
- GAFR = GPIO_H3800_CLK_OUT |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
- GPDR = GPIO_H3800_CLK_OUT |
- GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
- GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
- TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */
-
- /* Fix the memory bus */
- MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000;
-
- /* Set up ASIC #1 */
- H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */
- H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */
- H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N;
- H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS;
- H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N;
-
- H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N
- | GPIO1_RS232_ON
- | GPIO1_EAR_ON_N;
-
- /* Set up ASIC #2 */
- H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
- H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N;
-
- H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ
- | GPIO2_SD_DETECT
- | GPIO2_EAR_IN_N
- | GPIO2_USB_DETECT_N
- | GPIO2_SD_CON_SLT;
-
- /* TODO : Set sleep states & battery fault states */
-
- /* Clear VPP Enable */
- H3800_ASIC2_FlashWP_VPP_ON = 0;
- ipaq_model_ops = h3800_model_ops;
-}
-
-MACHINE_START(H3800, "Compaq iPAQ H3800")
- .phys_io = 0x80000000,
- .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
- .boot_params = 0xc0000100,
- .map_io = h3800_map_io,
- .init_irq = h3800_init_irq,
- .timer = &sa1100_timer,
- .init_machine = h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3800 */
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 69e9624..9efb569 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -14,21 +14,21 @@
#define __ASM_ARCH_COLLIE_H
-#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11
+#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
+#define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0)
#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
-#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18
+#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
-#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
- COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
- COLLIE_SCP_CHARGE_ON )
+#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
/* GPIOs for which the generic definition doesn't say much */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
index 9cc47fd..2827faa 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -29,7 +29,7 @@
#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
/* Physical memory regions corresponding to chip selects */
#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
@@ -93,76 +93,7 @@
IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
};
-struct ipaq_model_ops {
- const char *generic_name;
- void (*control)(enum ipaq_egpio_type, int);
- unsigned long (*read)(void);
- void (*blank_callback)(int blank);
- int (*pm_callback)(int req); /* Primary model callback */
- int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */
-};
-
-extern struct ipaq_model_ops ipaq_model_ops;
-
-static __inline__ const char * h3600_generic_name(void)
-{
- return ipaq_model_ops.generic_name;
-}
-
-static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
-{
- if (ipaq_model_ops.control)
- ipaq_model_ops.control(x,level);
-}
-
-static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
-{
- if (ipaq_model_ops.control)
- ipaq_model_ops.control(x,0);
-}
-
-static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
-{
- if (ipaq_model_ops.control)
- ipaq_model_ops.control(x,1);
-}
-
-static __inline__ unsigned long read_h3600_egpio(void)
-{
- if (ipaq_model_ops.read)
- return ipaq_model_ops.read();
- return 0;
-}
-
-static __inline__ int h3600_register_blank_callback(void (*f)(int))
-{
- ipaq_model_ops.blank_callback = f;
- return 0;
-}
-
-static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
-{
- ipaq_model_ops.blank_callback = NULL;
-}
-
-
-static __inline__ int h3600_register_pm_callback(int (*f)(int))
-{
- ipaq_model_ops.pm_callback_aux = f;
- return 0;
-}
-
-static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
-{
- ipaq_model_ops.pm_callback_aux = NULL;
-}
-
-static __inline__ int h3600_power_management(int req)
-{
- if (ipaq_model_ops.pm_callback)
- return ipaq_model_ops.pm_callback(req);
- return 0;
-}
+extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
#endif /* ASSEMBLY */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index 62b0b78..a36ca76 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -48,22 +48,11 @@
#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
-/* H3800 specific pins */
-#define GPIO_H3800_AC_IN GPIO_GPIO (12)
-#define GPIO_H3800_COM_DSR GPIO_GPIO (13)
-#define GPIO_H3800_MMC_INT GPIO_GPIO (18)
-#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */
-#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22)
-#define GPIO_H3800_CLK_OUT GPIO_GPIO (27)
-
/****************************************************/
#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
-#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18
-#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */
-
/* H3100 / 3600 EGPIO pins */
#define EGPIO_H3600_VPP_ON (1 << 0)
#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
@@ -84,457 +73,5 @@
#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
-/********************* H3800, ASIC #2 ********************/
-
-#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT)
-#define H3800_ASIC2_OFFSET(s,x,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-#define H3800_ASIC2_NOFFSET(s,x,n,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
-
-#define _H3800_ASIC2_GPIO_Base 0x0000
-#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */
-#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
-#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
-#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */
-#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */
-#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */
-#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */
-#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */
-
-#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
-#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
-#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
-#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
-#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
-#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data )
-#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
-#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
-#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
-
-#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */
-#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */
-#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */
-#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */
-#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */
-#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */
-#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */
-#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */
-#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */
-#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */
-#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */
-#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */
-
-#define _H3800_ASIC2_KPIO_Base 0x0200
-#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */
-#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */
-#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */
-#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */
-#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */
-#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */
-#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */
-#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */
-#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */
-
-#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction )
-#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
-#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
-#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
-#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
-#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
-#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data )
-#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
-#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
-#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
-
-#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 )
-#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 )
-#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 )
-#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 )
-#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 )
-#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 )
-#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 )
-#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 )
-
-#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */
-#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */
-#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */
-#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */
-#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */
-#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */
-#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */
-#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */
-#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */
-#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */
-#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */
-#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */
-
-/* Alternate KPIO functions (set by default) */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */
-#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */
-
-#define _H3800_ASIC2_SPI_Base 0x0400
-#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */
-
-#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control )
-#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data )
-#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
-
-#define _H3800_ASIC2_PWM_0_Base 0x0600
-#define _H3800_ASIC2_PWM_1_Base 0x0700
-#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */
-#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */
-#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */
-
-#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase )
-#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
-#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
-
-#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase )
-#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
-#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
-
-#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */
-#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */
-#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */
-
-#define _H3800_ASIC2_LED_0_Base 0x0800
-#define _H3800_ASIC2_LED_1_Base 0x0880
-#define _H3800_ASIC2_LED_2_Base 0x0900
-#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */
-#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */
-#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */
-#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */
-
-#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase )
-#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
-#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
-#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
-
-#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase )
-#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
-#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
-#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
-
-#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase )
-#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
-#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
-#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
-
-#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */
-#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */
-#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 )
-#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */
-
-#define _H3800_ASIC2_UART_0_Base 0x0A00
-#define _H3800_ASIC2_UART_1_Base 0x0C00
-#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */
-#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */
-#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */
-#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */
-#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */
-
-#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive )
-#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit )
-#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable )
-#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify )
-#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl )
-#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl )
-#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus )
-#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus )
-#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad )
-#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL )
-#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH )
-
-#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive )
-#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit )
-#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable )
-#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify )
-#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl )
-#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl )
-#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus )
-#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus )
-#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad )
-#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL )
-#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH )
-
-#define _H3800_ASIC2_TIMER_Base 0x0E00
-#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */
-
-#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command )
-
-#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */
-#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */
-#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */
-#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */
-#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */
-#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */
-#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */
-#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */
-
-#define _H3800_ASIC2_CLOCK_Base 0x1000
-#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */
-
-#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
-
-#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */
-#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
-#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */
-#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */
-#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */
-#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */
-#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */
-#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */
-#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */
-#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */
-#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */
-#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */
-#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */
-#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */
-#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */
-
-#define _H3800_ASIC2_ADC_Base 0x1200
-#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */
-#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */
-#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */
-
-#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer )
-#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus )
-#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data )
-
-#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */
-#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */
-
-#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */
-#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 )
-#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 )
-#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */
-#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */
-
-
-#define _H3800_ASIC2_INTR_Base 0x1600
-#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */
-#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */
-#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */
-
-#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
-#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
-#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
-
-#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */
-#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */
-#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 )
-#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 )
-#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 )
-#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 )
-
-#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */
-#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */
-
-
-#define _H3800_ASIC2_OWM_Base 0x1800
-#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */
-#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */
-#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */
-#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */
-#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */
-
-#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command )
-#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data )
-#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
-#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
-#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
-
-#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */
-#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */
-#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */
-#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */
-
-#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */
-#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */
-#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */
-#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */
-#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */
-
-#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */
-#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */
-#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */
-#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */
-
-#define _H3800_ASIC2_FlashCtl_Base 0x1A00
-
-/****************************************************/
-/* H3800, ASIC #1
- * This ASIC is accesed through ASIC #2, and
- * mapped into the 1c00 - 1f00 region
- */
-
-#define H3800_ASIC1_OFFSET(s,x,y) \
- (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
-
-#define _H3800_ASIC1_MMC_Base 0x1c00
-
-#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */
-#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */
-#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */
-#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */
-#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */
-#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */
-#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */
-#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */
-#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */
-#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */
-#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */
-#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */
-#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */
-#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */
-
-#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock )
-#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status )
-#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate )
-#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister )
-#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont )
-#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout )
-#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
-#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
-#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
-#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask )
-#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber )
-#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
-#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
-#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
-#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull )
-
-#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */
-#define H3800_ASIC1_MMC_START_CLOCK (1 << 1)
-
-#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0)
-#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1)
-#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2)
-#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3)
-#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */
-#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5)
-#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6)
-#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7)
-#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */
-#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */
-#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */
-#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */
-
-#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */
-#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */
-#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */
-#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */
-
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */
-#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */
-
-#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0)
-#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1)
-#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2)
-#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3)
-
-#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0)
-
-/********* GPIO **********/
-
-#define _H3800_ASIC1_GPIO_Base 0x1e00
-
-#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */
-#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */
-#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */
-#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */
-#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */
-#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */
-#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */
-#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */
-#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */
-#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */
-#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */
-#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */
-#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */
-#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */
-#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */
-#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */
-
-#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask )
-#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction )
-#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out )
-#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
-#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
-#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
-#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
-#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
-#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State )
-#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset )
-#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
-#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
-#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
-#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status )
-#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
-#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
-
-#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0)
-#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1)
-#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2)
-#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3)
-#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4)
-#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5)
-
-#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0)
-#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1)
-#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2)
-
-/* These are all outputs */
-#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */
-#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */
-#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */
-#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */
-#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */
-#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */
-#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */
-#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */
-#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */
-#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */
-#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */
-#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */
-#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */
-#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */
-#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */
-
-/* Write enable for the flash */
-
-#define _H3800_ASIC1_FlashWP_Base 0x1F00
-#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */
-#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 0cb3660..ae81f80 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -153,8 +153,6 @@
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SA1100_H3800)
-#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#else
@@ -175,23 +173,3 @@
#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2)
#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3)
-/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
-#define H3800_KPIO_IRQ_START (IRQ_BOARD_START)
-#define IRQ_H3800_KEY (IRQ_BOARD_START + 0)
-#define IRQ_H3800_SPI (IRQ_BOARD_START + 1)
-#define IRQ_H3800_OWM (IRQ_BOARD_START + 2)
-#define IRQ_H3800_ADC (IRQ_BOARD_START + 3)
-#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4)
-#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5)
-#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6)
-#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7)
-#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8)
-#define H3800_KPIO_IRQ_COUNT 9
-
-#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9)
-#define IRQ_H3800_PEN (IRQ_BOARD_START + 9)
-#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10)
-#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11)
-#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12)
-#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13)
-#define H3800_GPIO_IRQ_COUNT 5
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 63755ca..942b153 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -10,7 +10,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (mode == 's') {
/* Jump into ROM at address 0 */
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 81848aa..fd776bb 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -226,12 +226,22 @@
.id = -1,
};
+static struct platform_device jornada_kbd_device = {
+ .name = "jornada720_kbd",
+ .id = -1,
+};
+
+static struct platform_device jornada_ts_device = {
+ .name = "jornada_ts",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
-#ifdef CONFIG_SA1100_JORNADA720_SSP
&jornada_ssp_device,
-#endif
&s1d13xxxfb_device,
+ &jornada_kbd_device,
+ &jornada_ts_device,
};
static int __init jornada720_init(void)
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a23fd3d..358d875 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -16,12 +16,28 @@
#include <asm/leds.h>
#include <asm/param.h>
-#include <mach/hardware.h>
-
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#define IO_BASE 0xe0000000
+#define IO_SIZE 0x08000000
+#define IO_START 0x40000000
+#define ROMCARD_SIZE 0x08000000
+#define ROMCARD_START 0x10000000
+
+void arch_reset(char mode, const char *cmd)
+{
+ short temp;
+ local_irq_disable();
+ /* Reset the Machine via pc[3] of the sequoia chipset */
+ outw(0x09,0x24);
+ temp=inw(0x26);
+ temp = temp | (1<<3) | (1<<10);
+ outw(0x09,0x24);
+ outw(temp,0x26);
+}
+
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
@@ -50,14 +66,38 @@
},
};
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0x70,
+ .end = 0x73,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = IRQ_ISA_RTC_ALARM,
+ .end = IRQ_ISA_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
static int __init shark_init(void)
{
int ret;
if (machine_is_shark())
+ {
+ ret = platform_device_register(&rtc_device);
+ if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
ret = platform_device_register(&serial_device);
-
- return ret;
+ if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
+ }
+ return 0;
}
arch_initcall(shark_init);
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
index 6774b8d..10b5b8b 100644
--- a/arch/arm/mach-shark/dma.c
+++ b/arch/arm/mach-shark/dma.c
@@ -13,9 +13,11 @@
#include <asm/dma.h>
#include <asm/mach/dma.h>
-void __init arch_dma_init(dma_t *dma)
+static int __init shark_dma_init(void)
{
#ifdef CONFIG_ISA_DMA
- isa_init_dma(dma);
+ isa_init_dma();
#endif
+ return 0;
}
+core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 0836cb7..f97a762 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -27,5 +27,3 @@
bne 1001b
.endm
- .macro waituart,rd,rx
- .endm
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
new file mode 100644
index 0000000..84a5bf6
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/framebuffer.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-shark/include/mach/framebuffer.h
+ *
+ * by Alexander Schulz
+ *
+ */
+
+#ifndef __ASM_ARCH_FRAMEBUFFER_H
+#define __ASM_ARCH_FRAMEBUFFER_H
+
+/* defines for the Framebuffer */
+#define FB_START 0x06000000
+#define FB_SIZE 0x01000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
index 01bf760..94d84b2 100644
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -10,35 +10,8 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#ifndef __ASSEMBLY__
-
-/*
- * Mapping areas
- */
-#define IO_BASE 0xe0000000
-
-#else
-
-#define IO_BASE 0
-
-#endif
-
-#define IO_SIZE 0x08000000
-#define IO_START 0x40000000
-#define ROMCARD_SIZE 0x08000000
-#define ROMCARD_START 0x10000000
-
-
-/* defines for the Framebuffer */
-#define FB_START 0x06000000
-#define FB_SIZE 0x01000000
-
#define UNCACHEABLE_ADDR 0xdf010000
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
-
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x6000
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
index c5cee82..9ccbcec 100644
--- a/arch/arm/mach-shark/include/mach/io.h
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -11,10 +11,10 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define PCIO_BASE 0xe0000000
-#define IO_SPACE_LIMIT 0xffffffff
+#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-#define __mem_pci(addr) (addr)
+#define __io(a) ((void __iomem *)(0xe0000000 + (a)))
+
+#define __mem_pci(addr) (addr)
#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
index 0586acd..c8e8a4e 100644
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -7,7 +7,7 @@
#define NR_IRQS 16
#define IRQ_ISA_KEYBOARD 1
-#define RTC_IRQ 8
+#define IRQ_ISA_RTC_ALARM 8
#define I8042_KBD_IRQ 1
#define I8042_AUX_IRQ 12
#define IRQ_HARDDISK 14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
index 864298f..96c43b8 100644
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ b/arch/arm/mach-shark/include/mach/isa-dma.h
@@ -6,10 +6,6 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/* Use only the lowest 4MB, nothing else works.
- * The rest is not DMAable. See dev / .properties
- * in OpenFirmware.
- */
#define MAX_DMA_CHANNELS 8
#define DMA_ISA_CASCADE 4
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index c5ab038..3053e5b 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -23,6 +23,7 @@
{
if (node != 0) return;
/* Only the first 4 MB (=1024 Pages) are usable for DMA */
+ /* See dev / -> .properties in OpenFirmware. */
zone_size[1] = zone_size[0] - 1024;
zone_size[0] = 1024;
zhole_size[1] = zhole_size[0];
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index e45bd73..21c373b 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,20 +6,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-
-static void arch_reset(char mode)
-{
- short temp;
- local_irq_disable();
- /* Reset the Machine via pc[3] of the sequoia chipset */
- outw(0x09,0x24);
- temp=inw(0x26);
- temp = temp | (1<<3) | (1<<10);
- outw(0x09,0x24);
- outw(temp,0x26);
-
-}
+/* Found in arch/mach-shark/core.c */
+extern void arch_reset(char mode, const char *cmd);
static inline void arch_idle(void)
{
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 3725e16..22ccab4 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -11,7 +11,7 @@
static inline void putc(int c)
{
- int t;
+ volatile int t;
SERIAL_BASE[0] = c;
t=0x10000;
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 8bd8d6b..c9e32de 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -22,12 +22,16 @@
#include <linux/ioport.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
+
+#define SEQUOIA_LED_GREEN (1<<6)
+#define SEQUOIA_LED_AMBER (1<<5)
+#define SEQUOIA_LED_BACK (1<<7)
+
static char led_state;
static short hw_led_state;
static short saved_state;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1c43494..5657766 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -335,11 +335,25 @@
static struct platform_device versatile_i2c_device = {
.name = "versatile-i2c",
- .id = -1,
+ .id = 0,
.num_resources = 1,
.resource = &versatile_i2c_resource,
};
+static struct i2c_board_info versatile_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
+ .type = "ds1338",
+ },
+};
+
+static int __init versatile_i2c_init(void)
+{
+ return i2c_register_board_info(0, versatile_i2c_board_info,
+ ARRAY_SIZE(versatile_i2c_board_info));
+}
+arch_initcall(versatile_i2c_init);
+
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index c59e610..8ffc12a 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -34,7 +34,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
u32 val;
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 40ff408..de29ddc 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -43,35 +43,16 @@
extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
extern void w90p910_init_clocks(int xtal);
extern void w90p910_map_io(struct map_desc *mach_desc, int size);
+extern struct platform_device w90p910_serial_device;
extern struct sys_timer w90x900_timer;
-#define W90X900_RES(name) \
-struct resource w90x900_##name##_resource[] = { \
- [0] = { \
- .start = name##_PA, \
- .end = name##_PA + 0x0ff, \
- .flags = IORESOURCE_MEM, \
- }, \
- [1] = { \
- .start = IRQ_##name, \
- .end = IRQ_##name, \
- .flags = IORESOURCE_IRQ, \
- } \
-}
-
-#define W90X900_DEVICE(devname, regname, devid, platdevname) \
-struct platform_device w90x900_##devname = { \
- .name = platdevname, \
- .id = devid, \
- .num_resources = ARRAY_SIZE(w90x900_##regname##_resource), \
- .resource = w90x900_##regname##_resource, \
-}
-
-#define W90X900_UARTCFG(port, flag, uc, ulc, ufc) \
-{ \
- .hwport = port, \
- .flags = flag, \
- .ucon = uc, \
- .ulcon = ulc, \
- .ufcon = ufc, \
+#define W90X900_8250PORT(name) \
+{ \
+ .membase = name##_BA, \
+ .mapbase = name##_PA, \
+ .irq = IRQ_##name, \
+ .uartclk = 11313600, \
+ .regshift = 2, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
}
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 93753f9..9406400 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -21,7 +21,7 @@
{
}
-static void arch_reset(char mode)
+static void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 9ebc93f..726ff67 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -22,6 +22,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,28 +33,67 @@
#include <mach/map.h>
#include "cpu.h"
+/*w90p910 evb norflash driver data */
-static struct map_desc w90p910_iodesc[] __initdata = {
+#define W90P910_FLASH_BASE 0xA0000000
+#define W90P910_FLASH_SIZE 0x400000
+
+static struct mtd_partition w90p910_flash_partitions[] = {
+ {
+ .name = "NOR Partition 1 for kernel (960K)",
+ .size = 0xF0000,
+ .offset = 0x10000,
+ },
+ {
+ .name = "NOR Partition 2 for image (1M)",
+ .size = 0x100000,
+ .offset = 0x100000,
+ },
+ {
+ .name = "NOR Partition 3 for user (2M)",
+ .size = 0x200000,
+ .offset = 0x00200000,
+ }
};
-static struct w90x900_uartcfg w90p910_uartcfgs[] = {
- W90X900_UARTCFG(0, 0, 0, 0, 0),
- W90X900_UARTCFG(1, 0, 0, 0, 0),
- W90X900_UARTCFG(2, 0, 0, 0, 0),
- W90X900_UARTCFG(3, 0, 0, 0, 0),
- W90X900_UARTCFG(4, 0, 0, 0, 0),
+static struct physmap_flash_data w90p910_flash_data = {
+ .width = 2,
+ .parts = w90p910_flash_partitions,
+ .nr_parts = ARRAY_SIZE(w90p910_flash_partitions),
+};
+
+static struct resource w90p910_flash_resources[] = {
+ {
+ .start = W90P910_FLASH_BASE,
+ .end = W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device w90p910_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &w90p910_flash_data,
+ },
+ .resource = w90p910_flash_resources,
+ .num_resources = ARRAY_SIZE(w90p910_flash_resources),
+};
+
+static struct map_desc w90p910_iodesc[] __initdata = {
};
/*Here should be your evb resourse,such as LCD*/
static struct platform_device *w90p910evb_dev[] __initdata = {
+ &w90p910_serial_device,
+ &w90p910_flash_device,
};
static void __init w90p910evb_map_io(void)
{
w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
w90p910_init_clocks(0);
- w90p910_init_uarts(w90p910_uartcfgs, ARRAY_SIZE(w90p910_uartcfgs));
}
static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index aa783bc..2bcbaa6 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/serial_8250.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -36,12 +37,6 @@
#include "cpu.h"
-/*W90P910 has five uarts*/
-
-#define MAX_UART_COUNT 5
-static int uart_count;
-static struct platform_device *uart_devs[MAX_UART_COUNT-1];
-
/* Initial IO mappings */
static struct map_desc w90p910_iodesc[] __initdata = {
@@ -53,48 +48,19 @@
/*IODESC_ENT(LCD),*/
};
-/*Init the dev resource*/
+/* Initial serial platform data */
-static W90X900_RES(UART0);
-static W90X900_RES(UART1);
-static W90X900_RES(UART2);
-static W90X900_RES(UART3);
-static W90X900_RES(UART4);
-static W90X900_DEVICE(uart0, UART0, 0, "w90x900-uart");
-static W90X900_DEVICE(uart1, UART1, 1, "w90x900-uart");
-static W90X900_DEVICE(uart2, UART2, 2, "w90x900-uart");
-static W90X900_DEVICE(uart3, UART3, 3, "w90x900-uart");
-static W90X900_DEVICE(uart4, UART4, 4, "w90x900-uart");
-
-static struct platform_device *uart_devices[] __initdata = {
- &w90x900_uart0,
- &w90x900_uart1,
- &w90x900_uart2,
- &w90x900_uart3,
- &w90x900_uart4
+struct plat_serial8250_port w90p910_uart_data[] = {
+ W90X900_8250PORT(UART0),
};
-/*Init W90P910 uart device*/
-
-void __init w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no)
-{
- struct platform_device *platdev;
- int uart, uartdev;
-
- /*By min() to judge count of uart be used indeed*/
-
- uartdev = ARRAY_SIZE(uart_devices);
- no = min(uartdev, no);
-
- for (uart = 0; uart < no; uart++, cfg++) {
- if (cfg->hwport != uart)
- printk(KERN_ERR "w90x900_uartcfg[%d] error\n", uart);
- platdev = uart_devices[cfg->hwport];
- uart_devs[uart] = platdev;
- platdev->dev.platform_data = cfg;
- }
- uart_count = uart;
-}
+struct platform_device w90p910_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = w90p910_uart_data,
+ },
+};
/*Init W90P910 evb io*/
@@ -122,13 +88,6 @@
static int __init w90x900_arch_init(void)
{
- int ret;
-
- ret = w90p910_init_cpu();
- if (ret != 0)
- return ret;
-
- return platform_add_devices(uart_devs, uart_count);
-
+ return w90p910_init_cpu();
}
arch_initcall(w90x900_arch_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d490f37..a6230f7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -340,6 +340,17 @@
select CPU_TLB_V4WBI if MMU
select IO_36
+# Marvell PJ1 (Mohawk)
+config CPU_MOHAWK
+ bool
+ select CPU_32v5
+ select CPU_ABRT_EV5T
+ select CPU_PABRT_NOIFAR
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_TLB_V4WBI if MMU
+ select CPU_COPY_V4WB if MMU
+
# Feroceon
config CPU_FEROCEON
bool
@@ -569,7 +580,7 @@
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
@@ -653,7 +664,7 @@
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
+ depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
help
Say Y here to disable branch prediction. If unsure, say N.
@@ -704,7 +715,8 @@
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || REALVIEW_EB_A9MP
+ depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
default y
select OUTER_CACHE
help
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 480f78a..c264683 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
@@ -70,6 +71,7 @@
obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
+obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 80cd207..d6dd838 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -14,8 +14,12 @@
#include <linux/init.h>
#include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
#include <plat/cache-feroceon-l2.h>
-
+#include "mm.h"
/*
* Low-level cache maintenance operations.
@@ -34,14 +38,36 @@
* The range operations require two successive cp15 writes, in
* between which we don't want to be preempted.
*/
+
+static inline unsigned long l2_start_va(unsigned long paddr)
+{
+#ifdef CONFIG_HIGHMEM
+ /*
+ * Let's do our own fixmap stuff in a minimal way here.
+ * Because range ops can't be done on physical addresses,
+ * we simply install a virtual mapping for it only for the
+ * TLB lookup to occur, hence no need to flush the untouched
+ * memory mapping. This is protected with the disabling of
+ * interrupts by the caller.
+ */
+ unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+ unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ local_flush_tlb_kernel_page(vaddr);
+ return vaddr + (paddr & ~PAGE_MASK);
+#else
+ return __phys_to_virt(paddr);
+#endif
+}
+
static inline void l2_clean_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
}
-static inline void l2_clean_mva_range(unsigned long start, unsigned long end)
+static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
+ unsigned long va_start, va_end, flags;
/*
* Make sure 'start' and 'end' reference the same page, as
@@ -51,17 +77,14 @@
BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
+ va_start = l2_start_va(start);
+ va_end = va_start + (end - start);
__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
"mcr p15, 1, %1, c15, c9, 5"
- : : "r" (start), "r" (end));
+ : : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
}
-static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
-{
- l2_clean_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
static inline void l2_clean_inv_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
@@ -72,9 +95,9 @@
__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
}
-static inline void l2_inv_mva_range(unsigned long start, unsigned long end)
+static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
+ unsigned long va_start, va_end, flags;
/*
* Make sure 'start' and 'end' reference the same page, as
@@ -84,17 +107,14 @@
BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
+ va_start = l2_start_va(start);
+ va_end = va_start + (end - start);
__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
"mcr p15, 1, %1, c15, c11, 5"
- : : "r" (start), "r" (end));
+ : : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
}
-static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
-{
- l2_inv_mva_range(__phys_to_virt(start), __phys_to_virt(end));
-}
-
/*
* Linux primitives.
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 464de89..5d180cb 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -17,12 +17,14 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
#include <asm/system.h>
#include <asm/cputype.h>
#include <asm/cacheflush.h>
+#include <asm/kmap_types.h>
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
#define CR_L2 (1 << 26)
@@ -47,21 +49,11 @@
__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
}
-static inline void xsc3_l2_clean_pa(unsigned long addr)
-{
- xsc3_l2_clean_mva(__phys_to_virt(addr));
-}
-
static inline void xsc3_l2_inv_mva(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
}
-static inline void xsc3_l2_inv_pa(unsigned long addr)
-{
- xsc3_l2_inv_mva(__phys_to_virt(addr));
-}
-
static inline void xsc3_l2_inv_all(void)
{
unsigned long l2ctype, set_way;
@@ -79,50 +71,103 @@
dsb();
}
+#ifdef CONFIG_HIGHMEM
+#define l2_map_save_flags(x) raw_local_save_flags(x)
+#define l2_map_restore_flags(x) raw_local_irq_restore(x)
+#else
+#define l2_map_save_flags(x) ((x) = 0)
+#define l2_map_restore_flags(x) ((void)(x))
+#endif
+
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
+ unsigned long flags)
+{
+#ifdef CONFIG_HIGHMEM
+ unsigned long va = prev_va & PAGE_MASK;
+ unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
+ if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
+ /*
+ * Switching to a new page. Because cache ops are
+ * using virtual addresses only, we must put a mapping
+ * in place for it. We also enable interrupts for a
+ * short while and disable them again to protect this
+ * mapping.
+ */
+ unsigned long idx;
+ raw_local_irq_restore(flags);
+ idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
+ va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ raw_local_irq_restore(flags | PSR_I_BIT);
+ set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
+ local_flush_tlb_kernel_page(va);
+ }
+ return va + (pa_offset >> (32 - PAGE_SHIFT));
+#else
+ return __phys_to_virt(pa);
+#endif
+}
+
static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
{
+ unsigned long vaddr, flags;
+
if (start == 0 && end == -1ul) {
xsc3_l2_inv_all();
return;
}
+ vaddr = -1; /* to force the first mapping */
+ l2_map_save_flags(flags);
+
/*
* Clean and invalidate partial first cache line.
*/
if (start & (CACHE_LINE_SIZE - 1)) {
- xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
- xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
+ xsc3_l2_inv_mva(vaddr);
start = (start | (CACHE_LINE_SIZE - 1)) + 1;
}
/*
- * Clean and invalidate partial last cache line.
- */
- if (start < end && (end & (CACHE_LINE_SIZE - 1))) {
- xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
- xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
- end &= ~(CACHE_LINE_SIZE - 1);
- }
-
- /*
* Invalidate all full cache lines between 'start' and 'end'.
*/
- while (start < end) {
- xsc3_l2_inv_pa(start);
+ while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
+ /*
+ * Clean and invalidate partial last cache line.
+ */
+ if (start < end) {
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
+ xsc3_l2_inv_mva(vaddr);
+ }
+
+ l2_map_restore_flags(flags);
+
dsb();
}
static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
{
+ unsigned long vaddr, flags;
+
+ vaddr = -1; /* to force the first mapping */
+ l2_map_save_flags(flags);
+
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- xsc3_l2_clean_pa(start);
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
start += CACHE_LINE_SIZE;
}
+ l2_map_restore_flags(flags);
+
dsb();
}
@@ -148,18 +193,26 @@
static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
{
+ unsigned long vaddr, flags;
+
if (start == 0 && end == -1ul) {
xsc3_l2_flush_all();
return;
}
+ vaddr = -1; /* to force the first mapping */
+ l2_map_save_flags(flags);
+
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- xsc3_l2_clean_pa(start);
- xsc3_l2_inv_pa(start);
+ vaddr = l2_map_va(start, vaddr, flags);
+ xsc3_l2_clean_mva(vaddr);
+ xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
+ l2_map_restore_flags(flags);
+
dsb();
}
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index c3ba6a9..70997d5 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/highmem.h>
-static void __attribute__((naked))
+static void __naked
feroceon_copy_user_page(void *kto, const void *kfrom)
{
asm("\
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
index 70ed96c..de9c068 100644
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@@ -15,7 +15,7 @@
*
* FIXME: do we need to handle cache stuff...
*/
-static void __attribute__((naked))
+static void __naked
v3_copy_user_page(void *kto, const void *kfrom)
{
asm("\n\
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 1601698..7370a71 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -44,7 +44,7 @@
* instruction. If your processor does not supply this, you have to write your
* own copy_user_highpage that does the right thing.
*/
-static void __attribute__((naked))
+static void __naked
mc_copy_user_page(void *from, void *to)
{
asm volatile(
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 3ec93da..9ab0984 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -22,7 +22,7 @@
* instruction. If your processor does not supply this, you have to write your
* own copy_user_highpage that does the right thing.
*/
-static void __attribute__((naked))
+static void __naked
v4wb_copy_user_page(void *kto, const void *kfrom)
{
asm("\
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 0f1188e..300efaf 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -20,7 +20,7 @@
* dirty data in the cache. However, we do have to ensure that
* subsequent reads are up to date.
*/
-static void __attribute__((naked))
+static void __naked
v4wt_copy_user_page(void *kto, const void *kfrom)
{
asm("\
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 39a9945..bc4525f 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -29,7 +29,7 @@
* if we eventually end up using our copied page.
*
*/
-static void __attribute__((naked))
+static void __naked
xsc3_mc_copy_user_page(void *kto, const void *kfrom)
{
asm("\
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index d18f239..76824d3 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -42,7 +42,7 @@
* Dcache aliasing issue. The writes will be forwarded to the write buffer,
* and merged as appropriate.
*/
-static void __attribute__((naked))
+static void __naked
mc_copy_user_page(void *from, void *to)
{
/*
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 310e479..510c179 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -19,6 +19,7 @@
#include <linux/dma-mapping.h>
#include <asm/memory.h>
+#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
@@ -490,29 +491,101 @@
*/
void dma_cache_maint(const void *start, size_t size, int direction)
{
- const void *end = start + size;
+ void (*inner_op)(const void *, const void *);
+ void (*outer_op)(unsigned long, unsigned long);
- BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+ BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
switch (direction) {
case DMA_FROM_DEVICE: /* invalidate only */
- dmac_inv_range(start, end);
- outer_inv_range(__pa(start), __pa(end));
+ inner_op = dmac_inv_range;
+ outer_op = outer_inv_range;
break;
case DMA_TO_DEVICE: /* writeback only */
- dmac_clean_range(start, end);
- outer_clean_range(__pa(start), __pa(end));
+ inner_op = dmac_clean_range;
+ outer_op = outer_clean_range;
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- dmac_flush_range(start, end);
- outer_flush_range(__pa(start), __pa(end));
+ inner_op = dmac_flush_range;
+ outer_op = outer_flush_range;
break;
default:
BUG();
}
+
+ inner_op(start, start + size);
+ outer_op(__pa(start), __pa(start) + size);
}
EXPORT_SYMBOL(dma_cache_maint);
+static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+ void *vaddr;
+ unsigned long paddr;
+ void (*inner_op)(const void *, const void *);
+ void (*outer_op)(unsigned long, unsigned long);
+
+ switch (direction) {
+ case DMA_FROM_DEVICE: /* invalidate only */
+ inner_op = dmac_inv_range;
+ outer_op = outer_inv_range;
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ inner_op = dmac_clean_range;
+ outer_op = outer_clean_range;
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ inner_op = dmac_flush_range;
+ outer_op = outer_flush_range;
+ break;
+ default:
+ BUG();
+ }
+
+ if (!PageHighMem(page)) {
+ vaddr = page_address(page) + offset;
+ inner_op(vaddr, vaddr + size);
+ } else {
+ vaddr = kmap_high_get(page);
+ if (vaddr) {
+ vaddr += offset;
+ inner_op(vaddr, vaddr + size);
+ kunmap_high(page);
+ }
+ }
+
+ paddr = page_to_phys(page) + offset;
+ outer_op(paddr, paddr + size);
+}
+
+void dma_cache_maint_page(struct page *page, unsigned long offset,
+ size_t size, int dir)
+{
+ /*
+ * A single sg entry may refer to multiple physically contiguous
+ * pages. But we still need to process highmem pages individually.
+ * If highmem is not configured then the bulk of this loop gets
+ * optimized out.
+ */
+ size_t left = size;
+ do {
+ size_t len = left;
+ if (PageHighMem(page) && len + offset > PAGE_SIZE) {
+ if (offset >= PAGE_SIZE) {
+ page += offset / PAGE_SIZE;
+ offset %= PAGE_SIZE;
+ }
+ len = PAGE_SIZE - offset;
+ }
+ dma_cache_maint_contiguous(page, offset, len, dir);
+ offset = 0;
+ page++;
+ left -= len;
+ } while (left);
+}
+EXPORT_SYMBOL(dma_cache_maint_page);
+
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
@@ -610,7 +683,8 @@
continue;
if (!arch_is_coherent())
- dma_cache_maint(sg_virt(s), s->length, dir);
+ dma_cache_maint_page(sg_page(s), s->offset,
+ s->length, dir);
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 0fa9bf3..4e28348 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -192,7 +192,7 @@
struct address_space *mapping = page_mapping(page);
#ifndef CONFIG_SMP
- if (mapping && !mapping_mapped(mapping))
+ if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
set_bit(PG_dcache_dirty, &page->flags);
else
#endif
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
new file mode 100644
index 0000000..a34954d
--- /dev/null
+++ b/arch/arm/mm/highmem.c
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mm/highmem.c -- ARM highmem support
+ *
+ * Author: Nicolas Pitre
+ * Created: september 8, 2008
+ * Copyright: Marvell Semiconductors Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include "mm.h"
+
+void *kmap(struct page *page)
+{
+ might_sleep();
+ if (!PageHighMem(page))
+ return page_address(page);
+ return kmap_high(page);
+}
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+ BUG_ON(in_interrupt());
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+EXPORT_SYMBOL(kunmap);
+
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ /*
+ * With debugging enabled, kunmap_atomic forces that entry to 0.
+ * Make sure it was indeed properly unmapped.
+ */
+ BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+ set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0);
+ /*
+ * When debugging is off, kunmap_atomic leaves the previous mapping
+ * in place, so this TLB flush ensures the TLB is updated with the
+ * new mapping.
+ */
+ local_flush_tlb_kernel_page(vaddr);
+
+ return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
+
+ if (kvaddr >= (void *)FIXADDR_START) {
+ __cpuc_flush_dcache_page((void *)vaddr);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+ set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
+ local_flush_tlb_kernel_page(vaddr);
+#else
+ (void) idx; /* to kill a warning */
+#endif
+ }
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
+
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+ unsigned int idx;
+ unsigned long vaddr;
+
+ pagefault_disable();
+
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+ BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+#endif
+ set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0);
+ local_flush_tlb_kernel_page(vaddr);
+
+ return (void *)vaddr;
+}
+
+struct page *kmap_atomic_to_page(const void *ptr)
+{
+ unsigned long vaddr = (unsigned long)ptr;
+ pte_t *pte;
+
+ if (vaddr < FIXADDR_START)
+ return virt_to_page(ptr);
+
+ pte = TOP_PTE(vaddr);
+ return pte_page(*pte);
+}
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 34df4d9..8277802 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
+#include <linux/highmem.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
@@ -382,7 +383,7 @@
for_each_node(node)
bootmem_free_node(node, mi);
- high_memory = __va(memend_pfn << PAGE_SHIFT);
+ high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
/*
* This doesn't seem to be used by the Linux memory manager any
@@ -485,7 +486,7 @@
int i, node;
#ifndef CONFIG_DISCONTIGMEM
- max_mapnr = virt_to_page(high_memory) - mem_map;
+ max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
#endif
/* this will put all unused low memory onto the freelists */
@@ -504,6 +505,19 @@
__phys_to_pfn(__pa(swapper_pg_dir)), NULL);
#endif
+#ifdef CONFIG_HIGHMEM
+ /* set highmem page free */
+ for_each_online_node(node) {
+ for_each_nodebank (i, &meminfo, node) {
+ unsigned long start = bank_pfn_start(&meminfo.bank[i]);
+ unsigned long end = bank_pfn_end(&meminfo.bank[i]);
+ if (start >= max_low_pfn + PHYS_PFN_OFFSET)
+ totalhigh_pages += free_area(start, end, NULL);
+ }
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+
/*
* Since our memory may not be contiguous, calculate the
* real number of pages we have in this system
@@ -521,9 +535,10 @@
initsize = __init_end - __init_begin;
printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
- "%dK data, %dK init)\n",
+ "%dK data, %dK init, %luK highmem)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
- codesize >> 10, datasize >> 10, initsize >> 10);
+ codesize >> 10, datasize >> 10, initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
extern int sysctl_overcommit_memory;
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 95bbe11..c4f6f05 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -1,7 +1,6 @@
-/* the upper-most page table pointer */
-
#ifdef CONFIG_MMU
+/* the upper-most page table pointer */
extern pmd_t *top_pmd;
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 5358fcc..f7457fe 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -124,7 +124,7 @@
{
if (addr < PHYS_OFFSET)
return 0;
- if (addr + size > __pa(high_memory))
+ if (addr + size >= __pa(high_memory - 1))
return 0;
return 1;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index d4d082c..1585814 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -18,9 +18,11 @@
#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
+#include <asm/cachetype.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
+#include <asm/highmem.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -243,6 +245,10 @@
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_NONCACHED] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
@@ -406,9 +412,28 @@
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
}
+ /*
+ * Non-cacheable Normal - intended for memory areas that must
+ * not cause dirty cache line writebacks when used
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6) {
+ if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
+ /* Non-cacheable Normal is XCB = 001 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_BUFFERED;
+ } else {
+ /* For both ARMv6 and non-TEX-remapping ARMv7 */
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |=
+ PMD_SECT_TEX(1);
+ }
+ } else {
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
for (i = 0; i < 16; i++) {
unsigned long v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
@@ -677,6 +702,10 @@
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
+ } else if (cache_is_vipt_aliasing()) {
+ printk(KERN_CRIT "HIGHMEM is not yet supported "
+ "with VIPT aliasing cache, "
+ "ignoring high memory\n");
} else {
memmove(bank + 1, bank,
(meminfo.nr_banks - i) * sizeof(*bank));
@@ -895,6 +924,17 @@
flush_cache_all();
}
+static void __init kmap_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+ pmd_t *pmd = pmd_off_k(PKMAP_BASE);
+ pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
+ BUG_ON(!pmd_none(*pmd) || !pte);
+ __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
+ pkmap_page_table = pte + PTRS_PER_PTE;
+#endif
+}
+
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
@@ -908,6 +948,7 @@
prepare_page_table();
bootmem_init();
devicemaps_init(mdesc);
+ kmap_init();
top_pmd = pmd_off_k(0xffff0000);
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
new file mode 100644
index 0000000..540f507
--- /dev/null
+++ b/arch/arm/mm/proc-mohawk.S
@@ -0,0 +1,416 @@
+/*
+ * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
+ *
+ * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
+ *
+ * Heavily based on proc-arm926.S and proc-xsc3.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include "proc-macros.S"
+
+/*
+ * This is the maximum size of an area which will be flushed. If the
+ * area is larger than this, then we flush the whole cache.
+ */
+#define CACHE_DLIMIT 32768
+
+/*
+ * The cache line size of the L1 D cache.
+ */
+#define CACHE_DLINESIZE 32
+
+/*
+ * cpu_mohawk_proc_init()
+ */
+ENTRY(cpu_mohawk_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_mohawk_proc_fin()
+ */
+ENTRY(cpu_mohawk_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl mohawk_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1800 @ ...iz...........
+ bic r0, r0, #0x0006 @ .............ca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_mohawk_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ *
+ * (same as arm926)
+ */
+ .align 5
+ENTRY(cpu_mohawk_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x0007 @ .............cam
+ bic ip, ip, #0x1100 @ ...i...s........
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_mohawk_do_idle()
+ *
+ * Called with IRQs disabled
+ */
+ .align 5
+ENTRY(cpu_mohawk_do_idle)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular
+ * address space.
+ */
+ENTRY(mohawk_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(mohawk_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+ mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bgt __flush_whole_cache
+1: tst r2, #VM_EXEC
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(mohawk_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(mohawk_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(mohawk_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as v4wb)
+ */
+ENTRY(mohawk_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(mohawk_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(mohawk_cache_fns)
+ .long mohawk_flush_kern_cache_all
+ .long mohawk_flush_user_cache_all
+ .long mohawk_flush_user_cache_range
+ .long mohawk_coherent_kern_range
+ .long mohawk_coherent_user_range
+ .long mohawk_flush_kern_dcache_page
+ .long mohawk_dma_inv_range
+ .long mohawk_dma_clean_range
+ .long mohawk_dma_flush_range
+
+ENTRY(cpu_mohawk_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * cpu_mohawk_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 5
+ENTRY(cpu_mohawk_switch_mm)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ orr r0, r0, #0x18 @ cache the page table in L2
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mov pc, lr
+
+/*
+ * cpu_mohawk_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 5
+ENTRY(cpu_mohawk_set_pte_ext)
+ armv3_set_pte_ext
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __mohawk_setup, #function
+__mohawk_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
+ orr r4, r4, #0x18 @ cache the page table in L2
+ mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
+
+ mov r0, #0 @ don't allow CP access
+ mcr p15, 0, r0, c15, c1, 0 @ write CP access register
+
+ adr r5, mohawk_crval
+ ldmia r5, {r5, r6}
+ mrc p15, 0, r0, c1, c0 @ get control register
+ bic r0, r0, r5
+ orr r0, r0, r6
+ mov pc, lr
+
+ .size __mohawk_setup, . - __mohawk_setup
+
+ /*
+ * R
+ * .RVI ZFRS BLDP WCAM
+ * .011 1001 ..00 0101
+ *
+ */
+ .type mohawk_crval, #object
+mohawk_crval:
+ crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type mohawk_processor_functions, #object
+mohawk_processor_functions:
+ .word v5t_early_abort
+ .word pabort_noifar
+ .word cpu_mohawk_proc_init
+ .word cpu_mohawk_proc_fin
+ .word cpu_mohawk_reset
+ .word cpu_mohawk_do_idle
+ .word cpu_mohawk_dcache_clean_area
+ .word cpu_mohawk_switch_mm
+ .word cpu_mohawk_set_pte_ext
+ .size mohawk_processor_functions, . - mohawk_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_mohawk_name, #object
+cpu_mohawk_name:
+ .asciz "Marvell 88SV331x"
+ .size cpu_mohawk_name, . - cpu_mohawk_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __88sv331x_proc_info,#object
+__88sv331x_proc_info:
+ .long 0x56158000 @ Marvell 88SV331x (MOHAWK)
+ .long 0xfffff000
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __mohawk_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_mohawk_name
+ .long mohawk_processor_functions
+ .long v4wbi_tlb_fns
+ .long v4wb_user_fns
+ .long mohawk_cache_fns
+ .size __88sv331x_proc_info, . - __88sv331x_proc_info
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index cefc21c..d805a52 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -18,15 +18,14 @@
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <asm/ptrace.h>
-
-#include "../kernel/stacktrace.h"
+#include <asm/stacktrace.h>
static int report_trace(struct stackframe *frame, void *d)
{
unsigned int *depth = d;
if (*depth) {
- oprofile_add_trace(frame->lr);
+ oprofile_add_trace(frame->pc);
(*depth)--;
}
@@ -70,9 +69,12 @@
struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
if (!user_mode(regs)) {
- unsigned long base = ((unsigned long)regs) & ~(THREAD_SIZE - 1);
- walk_stackframe(regs->ARM_fp, base, base + THREAD_SIZE,
- report_trace, &depth);
+ struct stackframe frame;
+ frame.fp = regs->ARM_fp;
+ frame.sp = regs->ARM_sp;
+ frame.lr = regs->ARM_lr;
+ frame.pc = regs->ARM_pc;
+ walk_stackframe(&frame, report_trace, &depth);
return;
}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 9cc2b16..17d0e99 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -3,7 +3,7 @@
menu "Freescale MXC Implementations"
choice
- prompt "MXC/iMX Base Type"
+ prompt "Freescale CPU family:"
default ARCH_MX3
config ARCH_MX1
@@ -15,12 +15,14 @@
config ARCH_MX2
bool "MX2-based"
select CPU_ARM926T
+ select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX2 family
config ARCH_MX3
bool "MX3-based"
select CPU_V6
+ select COMMON_CLKDEV
help
This enables support for systems based on the Freescale i.MX3 family
@@ -43,4 +45,10 @@
requirements for timing.
Say N here, unless you have a specialized requirement.
+config MXC_PWM
+ tristate "Enable PWM driver"
+ depends on ARCH_MXC
+ help
+ Enable support for the i.MX PWM controller(s).
+
endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index db74a92..564fd4e 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,8 @@
#
# Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o
+obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_MXC_PWM) += pwm.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 0a38f0b..92e1356 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -48,6 +48,11 @@
*-------------------------------------------------------------------------*/
/*
+ * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
+ * MXC architectures have switched to using clkdev.
+ */
+#ifndef CONFIG_COMMON_CLKDEV
+/*
* Retrieve a clock by name.
*
* Note that we first try to use device id on the bus
@@ -110,6 +115,7 @@
return clk;
}
EXPORT_SYMBOL(clk_get);
+#endif
static void __clk_disable(struct clk *clk)
{
@@ -187,6 +193,7 @@
}
EXPORT_SYMBOL(clk_get_rate);
+#ifndef CONFIG_COMMON_CLKDEV
/* Decrement the clock's module reference count */
void clk_put(struct clk *clk)
{
@@ -194,6 +201,7 @@
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
+#endif
/* Round the requested clock rate to the nearest supported
* rate that is less than or equal to the requested rate.
@@ -257,6 +265,7 @@
}
EXPORT_SYMBOL(clk_get_parent);
+#ifndef CONFIG_COMMON_CLKDEV
/*
* Add a new clock to the clock tree.
*/
@@ -327,4 +336,49 @@
}
late_initcall(mxc_setup_proc_entry);
+#endif /* CONFIG_PROC_FS */
#endif
+
+/*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can at least be found on
+ * MX1, MX21, MX27 and MX31
+ *
+ * mfi + mfn / (mfd + 1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
+{
+ long long ll;
+ int mfn_abs;
+ unsigned int mfi, mfn, mfd, pd;
+
+ mfi = (reg_val >> 10) & 0xf;
+ mfn = reg_val & 0x3ff;
+ mfd = (reg_val >> 16) & 0x3ff;
+ pd = (reg_val >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ mfn_abs = mfn;
+
+#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
+ if (mfn >= 0x200) {
+ mfn |= 0xFFFFFE00;
+ mfn_abs = -mfn;
+ }
+#endif
+
+ freq *= 2;
+ freq /= pd + 1;
+
+ ll = (unsigned long long)freq * mfn_abs;
+
+ do_div(ll, mfd + 1);
+ if (mfn < 0)
+ ll = -ll;
+ ll = (freq * mfi) + ll;
+
+ return ll;
+}
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
new file mode 100644
index 0000000..386e0d5
--- /dev/null
+++ b/arch/arm/plat-mxc/cpu.c
@@ -0,0 +1,11 @@
+
+#include <linux/module.h>
+
+unsigned int __mxc_cpu_type;
+EXPORT_SYMBOL(__mxc_cpu_type);
+
+void mxc_set_cpu_type(unsigned int type)
+{
+ __mxc_cpu_type = type;
+}
+
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index c667482..56f2fb5 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <mach/common.h>
int __init mxc_register_device(struct platform_device *pdev, void *data)
{
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 2905ec7..e364a5e 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -113,7 +113,7 @@
void (*err_handler) (int, void *, int errcode);
void (*prog_handler) (int, void *, struct scatterlist *);
void *data;
- unsigned int dma_mode;
+ unsigned int dma_mode;
struct scatterlist *sg;
unsigned int resbytes;
int dma_num;
@@ -802,7 +802,7 @@
int ret = 0;
int i;
- dma_clk = clk_get(NULL, "dma_clk");
+ dma_clk = clk_get(NULL, "dma");
clk_enable(dma_clk);
/* reset DMA module */
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index ccbd94a..c6483ba 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -200,8 +200,8 @@
static int mxc_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
- _set_gpio_direction(chip, offset, 1);
mxc_gpio_set(chip, offset, value);
+ _set_gpio_direction(chip, offset, 1);
return 0;
}
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 8f34a05..1cac9d1 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -48,7 +48,8 @@
* Base address of PBC controller, CS4
*/
#define PBC_BASE_ADDRESS 0xEB000000
-#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset))
+#define PBC_REG_ADDR(offset) (void __force __iomem *) \
+ (PBC_BASE_ADDRESS + (offset))
/*
* PBC Interupt name definitions
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 451d510..318c72a 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#include <mach/hardware.h>
+
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR)
/* Offsets for the PBC Controller register */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
new file mode 100644
index 0000000..f8aef1b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31moboard_boards {
+ MX31NOBOARD = 0,
+ MX31DEVBOARD = 1,
+ MX31MARXBOT = 2,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31moboard_devboard_init(void);
+extern void mx31moboard_marxbot_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
new file mode 100644
index 0000000..4ff762d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
+#define __ASM_ARCH_MXC_BOARD_QONG_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+/* NOR FLASH */
+#define QONG_NOR_SIZE (128*1024*1024)
+
+#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/clkdev.h b/arch/arm/plat-mxc/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index d21f78e..43a82d0 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,9 +26,13 @@
struct module;
struct clk {
+#ifndef CONFIG_COMMON_CLKDEV
+ /* As soon as i.MX1 and i.MX31 switched to clkdev, this
+ * block can go away */
struct list_head node;
struct module *owner;
const char *name;
+#endif
int id;
/* Source clock this clk depends on */
struct clk *parent;
@@ -63,5 +67,7 @@
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
+unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 6350287..b2f9b72 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -12,12 +12,18 @@
#define __ASM_ARCH_MXC_COMMON_H__
struct platform_device;
+struct clk;
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
-extern void mxc_timer_init(const char *clk_timer);
-extern int mxc_clocks_init(unsigned long fref);
+extern void mxc_timer_init(struct clk *timer_clk);
+extern int mx1_clocks_init(unsigned long fref);
+extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx27_clocks_init(unsigned long fref);
+extern int mx31_clocks_init(unsigned long fref);
+extern int mx35_clocks_init(void);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
+extern void mxc_set_cpu_type(unsigned int type);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 602768b..4f77314 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -31,6 +31,9 @@
#ifdef CONFIG_MACH_MX31_3DS
#include <mach/board-mx31pdk.h>
#endif
+#ifdef CONFIG_MACH_QONG
+#include <mach/board-qong.h>
+#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a612d8b..42e4ee3 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -23,10 +23,16 @@
#include <asm/sizes.h>
#ifdef CONFIG_ARCH_MX3
-# include <mach/mx31.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
#endif
#ifdef CONFIG_ARCH_MX2
+# include <mach/mx2x.h>
+# ifdef CONFIG_MACH_MX21
+# include <mach/mx21.h>
+# endif
# ifdef CONFIG_MACH_MX27
# include <mach/mx27.h>
# endif
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
similarity index 95%
rename from arch/arm/mach-imx/include/mach/imxfb.h
rename to arch/arm/plat-mxc/include/mach/imxfb.h
index 870d0d9..762a7b0 100644
--- a/arch/arm/mach-imx/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,6 +76,9 @@
u_char * fixed_screen_cpu;
dma_addr_t fixed_screen_dma;
+ int (*init)(struct platform_device*);
+ int (*exit)(struct platform_device*);
+
void (*lcd_power)(int);
void (*backlight_power)(int);
};
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
deleted file mode 100644
index 95a383b..0000000
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef _MXC_GPIO_MX1_MX2_H
-#define _MXC_GPIO_MX1_MX2_H
-
-#include <linux/io.h>
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x) (0x00 + ((x) << 8))
-#define MXC_OCR1(x) (0x04 + ((x) << 8))
-#define MXC_OCR2(x) (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x) (0x1c + ((x) << 8))
-#define MXC_GIUS(x) (0x20 + ((x) << 8))
-#define MXC_SSR(x) (0x24 + ((x) << 8))
-#define MXC_ICR1(x) (0x28 + ((x) << 8))
-#define MXC_ICR2(x) (0x2c + ((x) << 8))
-#define MXC_IMR(x) (0x30 + ((x) << 8))
-#define MXC_ISR(x) (0x34 + ((x) << 8))
-#define MXC_GPR(x) (0x38 + ((x) << 8))
-#define MXC_SWR(x) (0x3c + ((x) << 8))
-#define MXC_PUEN(x) (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX 3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX 5
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT (1 << 8)
-#define GPIO_IN (0 << 8)
-#define GPIO_PUEN (1 << 9)
-
-#define GPIO_PF (1 << 10)
-#define GPIO_AF (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-/*-------------------------------------------------------------------------*/
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_IN | 1)
-#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
-#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
-#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
-#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
-#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
-#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
-#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
-#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
-#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
-#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
-#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
-#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
-#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
-#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
-#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
-#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
-#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
-#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
-#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
-#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
-#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
-#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
-#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
-#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
-#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
-#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
-#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
-#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
-#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
-#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
-#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
-#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
-#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
-#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
-#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
-#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
-#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
-#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
-#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
-#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
-#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
-#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
-#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
-#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
-#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
-#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
-#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
-#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
-#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
-#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
-#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
-#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
-#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
-#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
-#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
-#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11)
-#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
-#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
-#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
-#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13)
-#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
-#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
-#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
-#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
-#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
-#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
-#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
-#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19)
-#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
-#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
-#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
-#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21)
-#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC_B (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE_B (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
-#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26)
-#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
-#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
-#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31)
-#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
-#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6)
-#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
-#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
-#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
-#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
-#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
-#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
-#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
-#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16)
-#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17)
-#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18)
-#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19)
-#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20)
-#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21)
-#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22)
-#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23)
-#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24)
-#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25)
-#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26)
-#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27)
-#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28)
-#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29)
-#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30)
-#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31)
-#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
-#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
-#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
-#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
-#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
-#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
-#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
-#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
-#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
-#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
-#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
-#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
-#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
-#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
-#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
-#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
-#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
-#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
-#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
-#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
-#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
-#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
-#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
-#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
-#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
-#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
-#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30)
-#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31)
-#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
-#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
-#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
-#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
-#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
-#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4)
-#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
-#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7)
-#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
-#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9)
-#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
-#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11)
-#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
-#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13)
-#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
-#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
-#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
-#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
-#define PE18_PF_SDHC1_D0 (GPIO_PORTE | GPIO_PF | 18)
-#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
-#define PE19_PF_SDHC1_D1 (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SDHC1_D2 (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SDHC1_D3 (GPIO_PORTE | GPIO_PF | 21)
-#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
-#define PE22_PF_SDHC1_CMD (GPIO_PORTE | GPIO_PF | 22)
-#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
-#define PE22_PF_SDHC1_CLK (GPIO_PORTE | GPIO_PF | 23)
-#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
-#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
-#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
-#endif
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
new file mode 100644
index 0000000..bf23305
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -0,0 +1,166 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX1_H
+#define _MXC_IOMUX_MX1_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/* FIXME: This list is not completed. The correct directions are
+* missing on some (many) pins
+*/
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
new file mode 100644
index 0000000..63aaa97
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -0,0 +1,126 @@
+/*
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX21_H
+#define _MXC_IOMUX_MX21_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
+
+/* Alternate GPIO pin functions */
+
+#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+
+/* CIN GPIO pin functions */
+
+#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+
+/* AOUT GPIO pin functions */
+
+#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
new file mode 100644
index 0000000..5ac158b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -0,0 +1,207 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX27_H
+#define _MXC_IOMUX_MX27_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
+#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
+#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
+
+/* Alternate GPIO pin functions */
+
+#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
+#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
+#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
+
+/* AIN GPIO pin functions */
+
+#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+
+/* BIN GPIO pin functions */
+
+#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+
+/* CIN GPIO pin functions */
+
+#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
+
+/* AOUT GPIO pin functions */
+
+#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
new file mode 100644
index 0000000..fb5ae63
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -0,0 +1,237 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_MX2x_H
+#define _MXC_IOMUX_MX2x_H
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+
+/* Primary GPIO pin functions */
+
+#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
+
+/* Alternate GPIO pin functions */
+
+#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+
+/* AIN GPIO pin functions */
+
+#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+
+/* BIN GPIO pin functions */
+
+#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+
+/* CIN GPIO pin functions */
+
+#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+
+/* AOUT GPIO pin functions */
+
+#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
+#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
+
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c9198c0..ab838cf 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -92,7 +92,7 @@
MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
MUX_TAMPER_DETECT_EN = 1 << 16,
MUX_PGP_USB_4WIRE = 1 << 17,
- MUX_PGB_USB_COMMON = 1 << 18,
+ MUX_PGP_USB_COMMON = 1 << 18,
MUX_SDHC_MEMSTICK1 = 1 << 19,
MUX_SDHC_MEMSTICK2 = 1 << 20,
MUX_PGP_SPLL_BYP = 1 << 21,
@@ -109,21 +109,44 @@
};
/*
- * This function enables/disables the general purpose function for a particular
- * signal.
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
*/
-void iomux_config_gpr(enum iomux_gp_func , bool);
+int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label);
/*
- * set the mode for a IOMUX pin.
+ * releases a single pin:
+ * - make it available for a future use by another driver
+ * - frees the GPIO if the pin was configured as GPIO
+ * - DOES NOT reconfigure the IOMUX in its reset state
*/
-int mxc_iomux_mode(unsigned int);
+void mxc_iomux_release_pin(const unsigned int pin);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
/*
* This function enables/disables the general purpose function for a particular
* signal.
*/
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
+
+/*
+ * This function only configures the iomux hardware.
+ * It is called by the setup functions and should not be called directly anymore.
+ * It is here visible for backward compatibility
+ */
+int mxc_iomux_mode(unsigned int pin_mode);
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_GPIONUM_SHIFT 9
@@ -144,6 +167,11 @@
MXC_GPIO_IRQ_START)
/*
+ * The number of gpio devices among the pads
+ */
+#define GPIO_PORT_MAX 3
+
+/*
* This enumeration is constructed based on the Section
* "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
* value is constructed based on the rules described above.
@@ -480,6 +508,9 @@
MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
};
+#define PIN_MAX 327
+#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
+
/*
* Convenience values for use with mxc_iomux_mode()
*
@@ -507,7 +538,9 @@
#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
@@ -525,6 +558,33 @@
#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
new file mode 100644
index 0000000..171f8ad
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -0,0 +1,127 @@
+/*
+* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version 2
+* of the License, or (at your option) any later version.
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+* MA 02110-1301, USA.
+*/
+
+#ifndef _MXC_IOMUX_H
+#define _MXC_IOMUX_H
+
+/*
+* GPIO Module and I/O Multiplexer
+* x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x) (0x00 + ((x) << 8))
+#define MXC_OCR1(x) (0x04 + ((x) << 8))
+#define MXC_OCR2(x) (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x) (0x1c + ((x) << 8))
+#define MXC_GIUS(x) (0x20 + ((x) << 8))
+#define MXC_SSR(x) (0x24 + ((x) << 8))
+#define MXC_ICR1(x) (0x28 + ((x) << 8))
+#define MXC_ICR2(x) (0x2c + ((x) << 8))
+#define MXC_IMR(x) (0x30 + ((x) << 8))
+#define MXC_ISR(x) (0x34 + ((x) << 8))
+#define MXC_GPR(x) (0x38 + ((x) << 8))
+#define MXC_SWR(x) (0x3c + ((x) << 8))
+#define MXC_PUEN(x) (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX 3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX 5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT (1 << 8)
+#define GPIO_IN (0 << 8)
+#define GPIO_PUEN (1 << 9)
+
+#define GPIO_PF (1 << 10)
+#define GPIO_AF (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
+
+
+#ifdef CONFIG_ARCH_MX1
+#include <mach/iomux-mx1.h>
+#endif
+#ifdef CONFIG_ARCH_MX2
+#include <mach/iomux-mx2x.h>
+#ifdef CONFIG_MACH_MX21
+#include <mach/iomux-mx21.h>
+#endif
+#ifdef CONFIG_MACH_MX27
+#include <mach/iomux-mx27.h>
+#endif
+#endif
+
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
+
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+ const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 0b80839..e0783e6 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -14,7 +14,12 @@
#if defined CONFIG_ARCH_MX1
#define PHYS_OFFSET UL(0x08000000)
#elif defined CONFIG_ARCH_MX2
+#ifdef CONFIG_MACH_MX21
+#define PHYS_OFFSET UL(0xC0000000)
+#endif
+#ifdef CONFIG_MACH_MX27
#define PHYS_OFFSET UL(0xA0000000)
+#endif
#elif defined CONFIG_ARCH_MX3
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
new file mode 100644
index 0000000..e8c4cf5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
+ *
+ * This contains i.MX21-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX21_H__
+#define __ASM_ARCH_MXC_MX21_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR 0xC0000000
+#define CSD1_BASE_ADDR 0xC4000000
+
+#define CS0_BASE_ADDR 0xC8000000
+#define CS1_BASE_ADDR 0xCC000000
+#define CS2_BASE_ADDR 0xD0000000
+#define CS3_BASE_ADDR 0xD1000000
+#define CS4_BASE_ADDR 0xD2000000
+#define CS5_BASE_ADDR 0xDD000000
+#define PCMCIA_MEM_BASE_ADDR 0xD4000000
+
+/* NAND, SDRAM, WEIM etc controllers */
+#define X_MEMC_BASE_ADDR 0xDF000000
+#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
+#define X_MEMC_SIZE SZ_256K
+
+#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
+#define EIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+
+#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS (6*32 + 16)
+
+/* fixed interrupt numbers */
+#define MXC_INT_USBCTRL 58
+#define MXC_INT_USBCTRL 58
+#define MXC_INT_USBMNP 57
+#define MXC_INT_USBFUNC 56
+#define MXC_INT_USBHOST 55
+#define MXC_INT_USBDMA 54
+#define MXC_INT_USBWKUP 53
+#define MXC_INT_EMMADEC 50
+#define MXC_INT_EMMAENC 49
+#define MXC_INT_BMI 30
+#define MXC_INT_FIRI 9
+
+/* fixed DMA request numbers */
+#define DMA_REQ_BMI_RX 29
+#define DMA_REQ_BMI_TX 28
+#define DMA_REQ_FIRI_RX 4
+
+#endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 0313be7..6e93f2c 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -2,6 +2,10 @@
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
+ * This contains i.MX27-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
@@ -27,35 +31,6 @@
/* IRAM */
#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
-/* Register offests */
-#define AIPI_BASE_ADDR 0x10000000
-#define AIPI_BASE_ADDR_VIRT 0xF4000000
-#define AIPI_SIZE SZ_1M
-
-#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
-
-#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000)
#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000)
#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000)
@@ -64,41 +39,33 @@
#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000)
#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000)
#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000)
-
-#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000)
-#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
-/* for mx27*/
#define OTG_BASE_ADDR USBOTG_BASE_ADDR
#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000)
-
#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000)
#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000)
#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000)
#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000)
#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000)
-#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
-
-/* ROMP and AVIC */
+/* ROM patch */
#define ROMP_BASE_ADDR 0x10041000
-#define AVIC_BASE_ADDR 0x10040000
-
-#define SAHB1_BASE_ADDR 0x80000000
-#define SAHB1_BASE_ADDR_VIRT 0xF4100000
-#define SAHB1_SIZE SZ_1M
-
-#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000)
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR 0xA0000000
+#define CSD1_BASE_ADDR 0xB0000000
+
+#define CS0_BASE_ADDR 0xC0000000
+#define CS1_BASE_ADDR 0xC8000000
+#define CS2_BASE_ADDR 0xD0000000
+#define CS3_BASE_ADDR 0xD2000000
+#define CS4_BASE_ADDR 0xD4000000
+#define CS5_BASE_ADDR 0xD6000000
+#define PCMCIA_MEM_BASE_ADDR 0xDC000000
+
/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
#define X_MEMC_BASE_ADDR 0xD8000000
#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
@@ -110,56 +77,9 @@
#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-/* Memory regions and CS */
-#define SDRAM_BASE_ADDR 0xA0000000
-#define CSD1_BASE_ADDR 0xB0000000
-
-#define CS0_BASE_ADDR 0xC0000000
-#define CS1_BASE_ADDR 0xC8000000
-#define CS2_BASE_ADDR 0xD0000000
-#define CS3_BASE_ADDR 0xD2000000
-#define CS4_BASE_ADDR 0xD4000000
-#define CS5_BASE_ADDR 0xD6000000
-#define PCMCIA_MEM_BASE_ADDR 0xDC000000
-
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __iomem *) \
- (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
- AIPI_IO_ADDRESS(x) : \
- ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
- SAHB1_IO_ADDRESS(x) : \
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
- X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x) \
- (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x) \
- (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/* fixed interrput numbers */
+/* fixed interrupt numbers */
#define MXC_INT_CCM 63
#define MXC_INT_IIM 62
-#define MXC_INT_LCDC 61
-#define MXC_INT_SLCDC 60
#define MXC_INT_SAHARA 59
#define MXC_INT_SCC_SCM 58
#define MXC_INT_SCC_SMN 57
@@ -167,54 +87,12 @@
#define MXC_INT_USB2 55
#define MXC_INT_USB1 54
#define MXC_INT_VPU 53
-#define MXC_INT_EMMAPP 52
-#define MXC_INT_EMMAPRP 51
#define MXC_INT_FEC 50
#define MXC_INT_UART5 49
#define MXC_INT_UART6 48
-#define MXC_INT_DMACH15 47
-#define MXC_INT_DMACH14 46
-#define MXC_INT_DMACH13 45
-#define MXC_INT_DMACH12 44
-#define MXC_INT_DMACH11 43
-#define MXC_INT_DMACH10 42
-#define MXC_INT_DMACH9 41
-#define MXC_INT_DMACH8 40
-#define MXC_INT_DMACH7 39
-#define MXC_INT_DMACH6 38
-#define MXC_INT_DMACH5 37
-#define MXC_INT_DMACH4 36
-#define MXC_INT_DMACH3 35
-#define MXC_INT_DMACH2 34
-#define MXC_INT_DMACH1 33
-#define MXC_INT_DMACH0 32
-#define MXC_INT_CSI 31
#define MXC_INT_ATA 30
-#define MXC_INT_NANDFC 29
-#define MXC_INT_PCMCIA 28
-#define MXC_INT_WDOG 27
-#define MXC_INT_GPT1 26
-#define MXC_INT_GPT2 25
-#define MXC_INT_GPT3 24
-#define MXC_INT_GPT INT_GPT1
-#define MXC_INT_PWM 23
-#define MXC_INT_RTC 22
-#define MXC_INT_KPP 21
-#define MXC_INT_UART1 20
-#define MXC_INT_UART2 19
-#define MXC_INT_UART3 18
-#define MXC_INT_UART4 17
-#define MXC_INT_CSPI1 16
-#define MXC_INT_CSPI2 15
-#define MXC_INT_SSI1 14
-#define MXC_INT_SSI2 13
-#define MXC_INT_I2C 12
-#define MXC_INT_SDHC1 11
-#define MXC_INT_SDHC2 10
#define MXC_INT_SDHC3 9
-#define MXC_INT_GPIO 8
#define MXC_INT_SDHC 7
-#define MXC_INT_CSPI3 6
#define MXC_INT_RTIC 5
#define MXC_INT_GPT4 4
#define MXC_INT_GPT5 3
@@ -228,36 +106,9 @@
#define DMA_REQ_UART6_TX 34
#define DMA_REQ_UART5_RX 33
#define DMA_REQ_UART5_TX 32
-#define DMA_REQ_CSI_RX 31
-#define DMA_REQ_CSI_STAT 30
#define DMA_REQ_ATA_RCV 29
#define DMA_REQ_ATA_TX 28
-#define DMA_REQ_UART1_TX 27
-#define DMA_REQ_UART1_RX 26
-#define DMA_REQ_UART2_TX 25
-#define DMA_REQ_UART2_RX 24
-#define DMA_REQ_UART3_TX 23
-#define DMA_REQ_UART3_RX 22
-#define DMA_REQ_UART4_TX 21
-#define DMA_REQ_UART4_RX 20
-#define DMA_REQ_CSPI1_TX 19
-#define DMA_REQ_CSPI1_RX 18
-#define DMA_REQ_CSPI2_TX 17
-#define DMA_REQ_CSPI2_RX 16
-#define DMA_REQ_SSI1_TX1 15
-#define DMA_REQ_SSI1_RX1 14
-#define DMA_REQ_SSI1_TX0 13
-#define DMA_REQ_SSI1_RX0 12
-#define DMA_REQ_SSI2_TX1 11
-#define DMA_REQ_SSI2_RX1 10
-#define DMA_REQ_SSI2_TX0 9
-#define DMA_REQ_SSI2_RX0 8
-#define DMA_REQ_SDHC1 7
-#define DMA_REQ_SDHC2 6
#define DMA_REQ_MSHC 4
-#define DMA_REQ_EXT 3
-#define DMA_REQ_CSPI3_TX 2
-#define DMA_REQ_CSPI3_RX 1
/* silicon revisions specific to i.MX27 */
#define CHIP_REV_1_0 0x00
@@ -267,25 +118,8 @@
extern int mx27_revision(void);
#endif
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x1C
-#define GPIO_GDIR 0x00
-#define GPIO_PSR 0x24
-#define GPIO_ICR1 0x28
-#define GPIO_ICR2 0x2C
-#define GPIO_IMR 0x30
-#define GPIO_ISR 0x34
-#define GPIO_INT_LOW_LEV 0x3
-#define GPIO_INT_HIGH_LEV 0x2
-#define GPIO_INT_RISE_EDGE 0x0
-#define GPIO_INT_FALL_EDGE 0x1
-#define GPIO_INT_NONE 0x4
-
/* Mandatory defines used globally */
-/* this is an i.MX27 CPU */
-#define cpu_is_mx27() (1)
-
/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
#define ARCH_NR_GPIOS (192 + 16)
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
new file mode 100644
index 0000000..fc40d3a
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This contains hardware definitions that are common between i.MX21 and
+ * i.MX27.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX2x_H__
+#define __ASM_ARCH_MXC_MX2x_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* The following addresses are common between i.MX21 and i.MX27 */
+
+/* Register offests */
+#define AIPI_BASE_ADDR 0x10000000
+#define AIPI_BASE_ADDR_VIRT 0xF4000000
+#define AIPI_SIZE SZ_1M
+
+#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
+#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
+#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
+#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
+#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
+#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
+
+#define AVIC_BASE_ADDR 0x10040000
+
+#define SAHB1_BASE_ADDR 0x80000000
+#define SAHB1_BASE_ADDR_VIRT 0xF4100000
+#define SAHB1_SIZE SZ_1M
+
+#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (void __force __iomem *) \
+ (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+ AIPI_IO_ADDRESS(x) : \
+ ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+ SAHB1_IO_ADDRESS(x) : \
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+ X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x) \
+ (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x) \
+ (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrupt numbers */
+#define MXC_INT_LCDC 61
+#define MXC_INT_SLCDC 60
+#define MXC_INT_EMMAPP 52
+#define MXC_INT_EMMAPRP 51
+#define MXC_INT_DMACH15 47
+#define MXC_INT_DMACH14 46
+#define MXC_INT_DMACH13 45
+#define MXC_INT_DMACH12 44
+#define MXC_INT_DMACH11 43
+#define MXC_INT_DMACH10 42
+#define MXC_INT_DMACH9 41
+#define MXC_INT_DMACH8 40
+#define MXC_INT_DMACH7 39
+#define MXC_INT_DMACH6 38
+#define MXC_INT_DMACH5 37
+#define MXC_INT_DMACH4 36
+#define MXC_INT_DMACH3 35
+#define MXC_INT_DMACH2 34
+#define MXC_INT_DMACH1 33
+#define MXC_INT_DMACH0 32
+#define MXC_INT_CSI 31
+#define MXC_INT_NANDFC 29
+#define MXC_INT_PCMCIA 28
+#define MXC_INT_WDOG 27
+#define MXC_INT_GPT1 26
+#define MXC_INT_GPT2 25
+#define MXC_INT_GPT3 24
+#define MXC_INT_GPT INT_GPT1
+#define MXC_INT_PWM 23
+#define MXC_INT_RTC 22
+#define MXC_INT_KPP 21
+#define MXC_INT_UART1 20
+#define MXC_INT_UART2 19
+#define MXC_INT_UART3 18
+#define MXC_INT_UART4 17
+#define MXC_INT_CSPI1 16
+#define MXC_INT_CSPI2 15
+#define MXC_INT_SSI1 14
+#define MXC_INT_SSI2 13
+#define MXC_INT_I2C 12
+#define MXC_INT_SDHC1 11
+#define MXC_INT_SDHC2 10
+#define MXC_INT_GPIO 8
+#define MXC_INT_CSPI3 6
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x1C
+#define GPIO_GDIR 0x00
+#define GPIO_PSR 0x24
+#define GPIO_ICR1 0x28
+#define GPIO_ICR2 0x2C
+#define GPIO_IMR 0x30
+#define GPIO_ISR 0x34
+#define GPIO_INT_LOW_LEV 0x3
+#define GPIO_INT_HIGH_LEV 0x2
+#define GPIO_INT_RISE_EDGE 0x0
+#define GPIO_INT_FALL_EDGE 0x1
+#define GPIO_INT_NONE 0x4
+
+/* fixed DMA request numbers */
+#define DMA_REQ_CSI_RX 31
+#define DMA_REQ_CSI_STAT 30
+#define DMA_REQ_UART1_TX 27
+#define DMA_REQ_UART1_RX 26
+#define DMA_REQ_UART2_TX 25
+#define DMA_REQ_UART2_RX 24
+#define DMA_REQ_UART3_TX 23
+#define DMA_REQ_UART3_RX 22
+#define DMA_REQ_UART4_TX 21
+#define DMA_REQ_UART4_RX 20
+#define DMA_REQ_CSPI1_TX 19
+#define DMA_REQ_CSPI1_RX 18
+#define DMA_REQ_CSPI2_TX 17
+#define DMA_REQ_CSPI2_RX 16
+#define DMA_REQ_SSI1_TX1 15
+#define DMA_REQ_SSI1_RX1 14
+#define DMA_REQ_SSI1_TX0 13
+#define DMA_REQ_SSI1_RX0 12
+#define DMA_REQ_SSI2_TX1 11
+#define DMA_REQ_SSI2_RX1 10
+#define DMA_REQ_SSI2_TX0 9
+#define DMA_REQ_SSI2_RX0 8
+#define DMA_REQ_SDHC1 7
+#define DMA_REQ_SDHC2 6
+#define DMA_REQ_EXT 3
+#define DMA_REQ_CSPI3_TX 2
+#define DMA_REQ_CSPI3_RX 1
+
+#endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index de02665..0b06941b 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,360 +1,45 @@
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-/*
- * MX31 memory map:
- *
- * Virt Phys Size What
- * ---------------------------------------------------------------------------
- * F8000000 1FFC0000 16K IRAM
- * F9000000 30000000 256M L2CC
- * FC000000 43F00000 1M AIPS 1
- * FC100000 50000000 1M SPBA
- * FC200000 53F00000 1M AIPS 2
- * FC500000 60000000 128M ROMPATCH
- * FC400000 68000000 128M AVIC
- * 70000000 256M IPU (MAX M2)
- * 80000000 256M CSD0 SDRAM/DDR
- * 90000000 256M CSD1 SDRAM/DDR
- * A0000000 128M CS0 Flash
- * A8000000 128M CS1 Flash
- * B0000000 32M CS2
- * B2000000 32M CS3
- * F4000000 B4000000 32M CS4
- * B6000000 32M CS5
- * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
- * C0000000 64M PCMCIA/CF
- */
-
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
-/*
* IRAM
*/
-#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
-#define IRAM_BASE_ADDR_VIRT 0xF8000000
-#define IRAM_SIZE SZ_16K
+#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
+#define MX31_IRAM_SIZE SZ_16K
-/*
- * L2CC
- */
-#define L2CC_BASE_ADDR 0x30000000
-#define L2CC_BASE_ADDR_VIRT 0xF9000000
-#define L2CC_SIZE SZ_1M
-
-/*
- * AIPS 1
- */
-#define AIPS1_BASE_ADDR 0x43F00000
-#define AIPS1_BASE_ADDR_VIRT 0xFC000000
-#define AIPS1_SIZE SZ_1M
-
-#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
-#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-
-/*
- * SPBA global module enabled #0
- */
-#define SPBA0_BASE_ADDR 0x50000000
-#define SPBA0_BASE_ADDR_VIRT 0xFC100000
-#define SPBA0_SIZE SZ_1M
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000)
#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000)
-#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
-/*
- * AIPS 2
- */
-#define AIPS2_BASE_ADDR 0x53F00000
-#define AIPS2_BASE_ADDR_VIRT 0xFC200000
-#define AIPS2_SIZE SZ_1M
-#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000)
#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000)
-#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000)
#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000)
-#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000)
-#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
-/*
- * ROMP and AVIC
- */
-#define ROMP_BASE_ADDR 0x60000000
-#define ROMP_BASE_ADDR_VIRT 0xFC500000
-#define ROMP_SIZE SZ_1M
+#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-#define AVIC_BASE_ADDR 0x68000000
-#define AVIC_BASE_ADDR_VIRT 0xFC400000
-#define AVIC_SIZE SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR 0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
-#define X_MEMC_SIZE SZ_64K
-
-#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
-
-/*
- * Memory regions and CS
- */
-#define IPU_MEM_BASE_ADDR 0x70000000
-#define CSD0_BASE_ADDR 0x80000000
-#define CSD1_BASE_ADDR 0x90000000
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x) \
- (void __iomem *) \
- (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
- ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
- ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
- ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
- ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
- ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
- ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
- ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
- ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
- 0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-
-#define IRAM_IO_ADDRESS(x) \
- (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
-
-#define L2CC_IO_ADDRESS(x) \
- (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x) \
- (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x) \
- (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x) \
- (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x) \
- (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x) \
- (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x) \
- (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
- (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-/*
- * Interrupt numbers
- */
-#define MXC_INT_PEN_ADS7843 0
-#define MXC_INT_RESV1 1
-#define MXC_INT_CS8900A 2
-#define MXC_INT_I2C3 3
-#define MXC_INT_I2C2 4
#define MXC_INT_MPEG4_ENCODER 5
-#define MXC_INT_RTIC 6
#define MXC_INT_FIRI 7
-#define MXC_INT_MMC_SDHC2 8
+#define MX31_INT_MMC_SDHC2 8
#define MXC_INT_MMC_SDHC1 9
-#define MXC_INT_I2C 10
-#define MXC_INT_SSI2 11
-#define MXC_INT_SSI1 12
-#define MXC_INT_CSPI2 13
-#define MXC_INT_CSPI1 14
-#define MXC_INT_ATA 15
+#define MX31_INT_SSI2 11
+#define MX31_INT_SSI1 12
#define MXC_INT_MBX 16
#define MXC_INT_CSPI3 17
-#define MXC_INT_UART3 18
-#define MXC_INT_IIM 19
#define MXC_INT_SIM2 20
#define MXC_INT_SIM1 21
-#define MXC_INT_RNGA 22
-#define MXC_INT_EVTMON 23
-#define MXC_INT_KPP 24
-#define MXC_INT_RTC 25
-#define MXC_INT_PWM 26
-#define MXC_INT_EPIT2 27
-#define MXC_INT_EPIT1 28
-#define MXC_INT_GPT 29
-#define MXC_INT_RESV30 30
-#define MXC_INT_RESV31 31
-#define MXC_INT_UART2 32
-#define MXC_INT_NANDFC 33
-#define MXC_INT_SDMA 34
+#define MXC_INT_CCM_DVFS 31
#define MXC_INT_USB1 35
#define MXC_INT_USB2 36
#define MXC_INT_USB3 37
#define MXC_INT_USB4 38
-#define MXC_INT_MSHC1 39
#define MXC_INT_MSHC2 40
-#define MXC_INT_IPU_ERR 41
-#define MXC_INT_IPU_SYN 42
-#define MXC_INT_RESV43 43
-#define MXC_INT_RESV44 44
-#define MXC_INT_UART1 45
#define MXC_INT_UART4 46
#define MXC_INT_UART5 47
-#define MXC_INT_ECT 48
-#define MXC_INT_SCC_SCM 49
-#define MXC_INT_SCC_SMN 50
-#define MXC_INT_GPIO2 51
-#define MXC_INT_GPIO1 52
#define MXC_INT_CCM 53
#define MXC_INT_PCMCIA 54
-#define MXC_INT_WDOG 55
-#define MXC_INT_GPIO3 56
-#define MXC_INT_RESV57 57
-#define MXC_INT_EXT_POWER 58
-#define MXC_INT_EXT_TEMPER 59
-#define MXC_INT_EXT_SENSOR60 60
-#define MXC_INT_EXT_SENSOR61 61
-#define MXC_INT_EXT_WDOG 62
-#define MXC_INT_EXT_TV 63
-#define PROD_SIGNATURE 0x1 /* For MX31 */
-
-/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0 0x10
-#define CHIP_REV_1_1 0x11
-#define CHIP_REV_1_2 0x12
-#define CHIP_REV_1_3 0x13
-#define CHIP_REV_2_0 0x20
-#define CHIP_REV_2_1 0x21
-#define CHIP_REV_2_2 0x22
-#define CHIP_REV_2_3 0x23
-#define CHIP_REV_3_0 0x30
-#define CHIP_REV_3_1 0x31
-#define CHIP_REV_3_2 0x32
-
-#define SYSTEM_REV_MIN CHIP_REV_1_0
-#define SYSTEM_REV_NUM 3
-
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR 0x00
-#define GPIO_GDIR 0x04
-#define GPIO_PSR 0x08
-#define GPIO_ICR1 0x0C
-#define GPIO_ICR2 0x10
-#define GPIO_IMR 0x14
-#define GPIO_ISR 0x18
-#define GPIO_INT_LOW_LEV 0x0
-#define GPIO_INT_HIGH_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_FALL_EDGE 0x3
-#define GPIO_INT_NONE 0x4
-
-/* Mandatory defines used globally */
-
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS 96
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-/* this is a i.MX31 CPU */
-#define cpu_is_mx31() (1)
-
-extern unsigned int system_rev;
-
-static inline int mx31_revision(void)
-{
- return system_rev;
-}
-#endif
-
-#endif /* __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
new file mode 100644
index 0000000..6465fef
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -0,0 +1,29 @@
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
+#define MX35_IRAM_SIZE SZ_128K
+
+#define MXC_FEC_BASE_ADDR 0x50038000
+#define MX35_NFC_BASE_ADDR 0xBB000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_OWIRE 2
+#define MX35_INT_MMC_SDHC1 7
+#define MXC_INT_MMC_SDHC2 8
+#define MXC_INT_MMC_SDHC3 9
+#define MX35_INT_SSI1 11
+#define MX35_INT_SSI2 12
+#define MXC_INT_GPU2D 16
+#define MXC_INT_ASRC 17
+#define MXC_INT_USBHS 35
+#define MXC_INT_USBOTG 37
+#define MXC_INT_ESAI 40
+#define MXC_INT_CAN1 43
+#define MXC_INT_CAN2 44
+#define MXC_INT_MLB 46
+#define MXC_INT_SPDIF 47
+#define MXC_INT_FEC 57
+
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
index e391a76..ac24c5c 100644
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -14,25 +14,25 @@
#include <linux/fb.h>
/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH 0x80000000
-#define FB_SYNC_CLK_INVERT 0x40000000
-#define FB_SYNC_DATA_INVERT 0x20000000
-#define FB_SYNC_CLK_IDLE_EN 0x10000000
-#define FB_SYNC_SHARP_MODE 0x08000000
-#define FB_SYNC_SWAP_RGB 0x04000000
-#define FB_SYNC_CLK_SEL_EN 0x02000000
+#define FB_SYNC_OE_ACT_HIGH 0x80000000
+#define FB_SYNC_CLK_INVERT 0x40000000
+#define FB_SYNC_DATA_INVERT 0x20000000
+#define FB_SYNC_CLK_IDLE_EN 0x10000000
+#define FB_SYNC_SHARP_MODE 0x08000000
+#define FB_SYNC_SWAP_RGB 0x04000000
+#define FB_SYNC_CLK_SEL_EN 0x02000000
/**
* struct mx3fb_platform_data - mx3fb platform data
*
- * @dma_dev: pointer to the dma-device, used for dma-slave connection
- * @mode: pointer to a platform-provided per mxc_register_fb() videomode
+ * @dma_dev: pointer to the dma-device, used for dma-slave connection
+ * @mode: pointer to a platform-provided per mxc_register_fb() videomode
*/
struct mx3fb_platform_data {
- struct device *dma_dev;
- const char *name;
- const struct fb_videomode *mode;
- int num_modes;
+ struct device *dma_dev;
+ const char *name;
+ const struct fb_videomode *mode;
+ int num_modes;
};
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
new file mode 100644
index 0000000..3878c60
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ * MX31 memory map:
+ *
+ * Virt Phys Size What
+ * ---------------------------------------------------------------------------
+ * FC000000 43F00000 1M AIPS 1
+ * FC100000 50000000 1M SPBA
+ * FC200000 53F00000 1M AIPS 2
+ * FC500000 60000000 128M ROMPATCH
+ * FC400000 68000000 128M AVIC
+ * 70000000 256M IPU (MAX M2)
+ * 80000000 256M CSD0 SDRAM/DDR
+ * 90000000 256M CSD1 SDRAM/DDR
+ * A0000000 128M CS0 Flash
+ * A8000000 128M CS1 Flash
+ * B0000000 32M CS2
+ * B2000000 32M CS3
+ * F4000000 B4000000 32M CS4
+ * B6000000 32M CS5
+ * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * C0000000 64M PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR 0xA0000000
+#define CS1_BASE_ADDR 0xA8000000
+#define CS2_BASE_ADDR 0xB0000000
+#define CS3_BASE_ADDR 0xB2000000
+
+#define CS4_BASE_ADDR 0xB4000000
+#define CS4_BASE_ADDR_VIRT 0xF4000000
+#define CS4_SIZE SZ_32M
+
+#define CS5_BASE_ADDR 0xB6000000
+#define PCMCIA_MEM_BASE_ADDR 0xBC000000
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR 0x30000000
+#define L2CC_SIZE SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR 0x43F00000
+#define AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define AIPS1_SIZE SZ_1M
+
+#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
+#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
+#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 0x50000000
+#define SPBA0_BASE_ADDR_VIRT 0xFC100000
+#define SPBA0_SIZE SZ_1M
+
+#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
+#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR 0x53F00000
+#define AIPS2_BASE_ADDR_VIRT 0xFC200000
+#define AIPS2_SIZE SZ_1M
+#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
+#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
+#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
+#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR 0x60000000
+#define ROMP_BASE_ADDR_VIRT 0xFC500000
+#define ROMP_SIZE SZ_1M
+
+#define AVIC_BASE_ADDR 0x68000000
+#define AVIC_BASE_ADDR_VIRT 0xFC400000
+#define AVIC_SIZE SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR 0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
+#define X_MEMC_SIZE SZ_64K
+
+#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR 0x70000000
+#define CSD0_BASE_ADDR 0x80000000
+#define CSD1_BASE_ADDR 0x90000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x) \
+ (void __force __iomem *) \
+ (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+ ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+ ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+ ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+ ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+ ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+ ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+ 0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define L2CC_IO_ADDRESS(x) \
+ (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x) \
+ (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x) \
+ (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x) \
+ (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x) \
+ (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x) \
+ (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x) \
+ (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+ (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_I2C3 3
+#define MXC_INT_I2C2 4
+#define MXC_INT_RTIC 6
+#define MXC_INT_I2C 10
+#define MXC_INT_CSPI2 13
+#define MXC_INT_CSPI1 14
+#define MXC_INT_ATA 15
+#define MXC_INT_UART3 18
+#define MXC_INT_IIM 19
+#define MXC_INT_RNGA 22
+#define MXC_INT_EVTMON 23
+#define MXC_INT_KPP 24
+#define MXC_INT_RTC 25
+#define MXC_INT_PWM 26
+#define MXC_INT_EPIT2 27
+#define MXC_INT_EPIT1 28
+#define MXC_INT_GPT 29
+#define MXC_INT_POWER_FAIL 30
+#define MXC_INT_UART2 32
+#define MXC_INT_NANDFC 33
+#define MXC_INT_SDMA 34
+#define MXC_INT_MSHC1 39
+#define MXC_INT_IPU_ERR 41
+#define MXC_INT_IPU_SYN 42
+#define MXC_INT_UART1 45
+#define MXC_INT_ECT 48
+#define MXC_INT_SCC_SCM 49
+#define MXC_INT_SCC_SMN 50
+#define MXC_INT_GPIO2 51
+#define MXC_INT_GPIO1 52
+#define MXC_INT_WDOG 55
+#define MXC_INT_GPIO3 56
+#define MXC_INT_EXT_POWER 58
+#define MXC_INT_EXT_TEMPER 59
+#define MXC_INT_EXT_SENSOR60 60
+#define MXC_INT_EXT_SENSOR61 61
+#define MXC_INT_EXT_WDOG 62
+#define MXC_INT_EXT_TV 63
+
+#define PROD_SIGNATURE 0x1 /* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0 0x10
+#define CHIP_REV_1_1 0x11
+#define CHIP_REV_1_2 0x12
+#define CHIP_REV_1_3 0x13
+#define CHIP_REV_2_0 0x20
+#define CHIP_REV_2_1 0x21
+#define CHIP_REV_2_2 0x22
+#define CHIP_REV_2_3 0x23
+#define CHIP_REV_3_0 0x30
+#define CHIP_REV_3_1 0x31
+#define CHIP_REV_3_2 0x32
+
+#define SYSTEM_REV_MIN CHIP_REV_1_0
+#define SYSTEM_REV_NUM 3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x00
+#define GPIO_GDIR 0x04
+#define GPIO_PSR 0x08
+#define GPIO_ICR1 0x0C
+#define GPIO_ICR2 0x10
+#define GPIO_IMR 0x14
+#define GPIO_ISR 0x18
+#define GPIO_INT_LOW_LEV 0x0
+#define GPIO_INT_HIGH_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_FALL_EDGE 0x3
+#define GPIO_INT_NONE 0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS 96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+ return system_rev;
+}
+#endif
+
+#endif /* __ASM_ARCH_MXC_MX31_H__ */
+
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index f6caab0..5fa2a07 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -24,13 +24,74 @@
#error "Do not include directly."
#endif
-/* clean up all things that are not used */
-#ifndef CONFIG_ARCH_MX3
-# define cpu_is_mx31() (0)
+#define MXC_CPU_MX1 1
+#define MXC_CPU_MX21 21
+#define MXC_CPU_MX27 27
+#define MXC_CPU_MX31 31
+#define MXC_CPU_MX35 35
+
+#ifndef __ASSEMBLY__
+extern unsigned int __mxc_cpu_type;
#endif
-#ifndef CONFIG_MACH_MX27
-# define cpu_is_mx27() (0)
+#ifdef CONFIG_ARCH_MX1
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX1
+# endif
+# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1)
+#else
+# define cpu_is_mx1() (0)
+#endif
+
+#ifdef CONFIG_MACH_MX21
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX21
+# endif
+# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21)
+#else
+# define cpu_is_mx21() (0)
+#endif
+
+#ifdef CONFIG_MACH_MX27
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX27
+# endif
+# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27)
+#else
+# define cpu_is_mx27() (0)
+#endif
+
+#ifdef CONFIG_ARCH_MX31
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX31
+# endif
+# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31)
+#else
+# define cpu_is_mx31() (0)
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX35
+# endif
+# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35)
+#else
+# define cpu_is_mx35() (0)
#endif
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
@@ -39,4 +100,7 @@
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
#endif
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
+
#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index bbfc374..cd03eba 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -26,7 +26,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
}
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index df6f183..a37163c 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -32,7 +32,7 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/iomux.h>
void mxc_gpio_mode(int gpio_mode)
{
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
new file mode 100644
index 0000000..9bffbc5
--- /dev/null
+++ b/arch/arm/plat-mxc/pwm.c
@@ -0,0 +1,300 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
+#define PWM_VER_1
+
+#define PWMCR 0x00 /* PWM Control Register */
+#define PWMSR 0x04 /* PWM Sample Register */
+#define PWMPR 0x08 /* PWM Period Register */
+#define PWMCNR 0x0C /* PWM Counter Register */
+
+#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */
+#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */
+#define PWMCR_SWR (1 << 16) /* Software Reset */
+#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */
+#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */
+#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */
+#define PWMCR_IRQ (1 << 7) /* Interrupt Request */
+#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */
+#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */
+#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */
+#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
+#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */
+
+#define MAX_DIV (128 * 16)
+#endif
+
+#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
+#define PWM_VER_2
+
+#define PWMCR 0x00 /* PWM Control Register */
+#define PWMSR 0x04 /* PWM Status Register */
+#define PWMIR 0x08 /* PWM Interrupt Register */
+#define PWMSAR 0x0C /* PWM Sample Register */
+#define PWMPR 0x10 /* PWM Period Register */
+#define PWMCNR 0x14 /* PWM Counter Register */
+
+#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */
+#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */
+#define PWMCR_SWR (1 << 3) /* Software Reset */
+#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */
+#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16)
+#define PWMCR_CLKSRC_OFF (0 << 16)
+#define PWMCR_CLKSRC_IPG (1 << 16)
+#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define PWMCR_CLKSRC_CLK32 (3 << 16)
+#define PWMCR_POUTC
+#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */
+#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */
+#define PWMCR_DBGEN (1 << 22) /* Debug Mode */
+#define PWMCR_WAITEN (1 << 23) /* Wait Mode */
+#define PWMCR_DOZEN (1 << 24) /* Doze Mode */
+#define PWMCR_STOPEN (1 << 25) /* Stop Mode */
+#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */
+
+#define MAX_DIV 4096
+#endif
+
+#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
+#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
+#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+ struct clk *clk;
+
+ int clk_enabled;
+ void __iomem *mmio_base;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+#ifdef PWM_VER_2
+ writel(duty_cycles, pwm->mmio_base + PWMSAR);
+ writel(period_cycles, pwm->mmio_base + PWMPR);
+ writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
+ pwm->mmio_base + PWMCR);
+#elif defined PWM_VER_1
+#error PWM not yet working on MX1 / MX21
+#endif
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ int rc = 0;
+
+ if (!pwm->clk_enabled) {
+ rc = clk_enable(pwm->clk);
+ if (!rc)
+ pwm->clk_enabled = 1;
+ }
+ return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ if (pwm->clk_enabled) {
+ clk_disable(pwm->clk);
+ pwm->clk_enabled = 0;
+ }
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else
+ pwm = ERR_PTR(-EBUSY);
+ } else
+ pwm = ERR_PTR(-ENOENT);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else
+ pr_warning("PWM device already freed\n");
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static int __devinit mxc_pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+ int ret = 0;
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pwm->clk = clk_get(&pdev->dev, "pwm");
+
+ if (IS_ERR(pwm->clk)) {
+ ret = PTR_ERR(pwm->clk);
+ goto err_free;
+ }
+
+ pwm->clk_enabled = 0;
+
+ pwm->use_count = 0;
+ pwm->pwm_id = pdev->id;
+ pwm->pdev = pdev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free_clk;
+ }
+
+ r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free_clk;
+ }
+
+ pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ if (pwm->mmio_base == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+
+ platform_set_drvdata(pdev, pwm);
+ return 0;
+
+err_free_mem:
+ release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+ clk_put(pwm->clk);
+err_free:
+ kfree(pwm);
+ return ret;
+}
+
+static int __devexit mxc_pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+ struct resource *r;
+
+ pwm = platform_get_drvdata(pdev);
+ if (pwm == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+ list_del(&pwm->node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwm->mmio_base);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, r->end - r->start + 1);
+
+ clk_put(pwm->clk);
+
+ kfree(pwm);
+ return 0;
+}
+
+static struct platform_driver mxc_pwm_driver = {
+ .driver = {
+ .name = "mxc_pwm",
+ },
+ .probe = mxc_pwm_probe,
+ .remove = __devexit_p(mxc_pwm_remove),
+};
+
+static int __init mxc_pwm_init(void)
+{
+ return platform_driver_register(&mxc_pwm_driver);
+}
+arch_initcall(mxc_pwm_init);
+
+static void __exit mxc_pwm_exit(void)
+{
+ platform_driver_unregister(&mxc_pwm_driver);
+}
+module_exit(mxc_pwm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 758a129..ef1b3cd 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -34,9 +34,6 @@
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-/* clock source for the timer */
-static struct clk *timer_clk;
-
/* clock source */
static cycle_t mxc_get_cycles(void)
@@ -53,13 +50,11 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static int __init mxc_clocksource_init(void)
+static int __init mxc_clocksource_init(struct clk *timer_clk)
{
- unsigned int clock;
+ unsigned int c = clk_get_rate(timer_clk);
- clock = clk_get_rate(timer_clk);
-
- clocksource_mxc.mult = clocksource_hz2mult(clock,
+ clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
@@ -177,13 +172,11 @@
.rating = 200,
};
-static int __init mxc_clockevent_init(void)
+static int __init mxc_clockevent_init(struct clk *timer_clk)
{
- unsigned int clock;
+ unsigned int c = clk_get_rate(timer_clk);
- clock = clk_get_rate(timer_clk);
-
- clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+ clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
@@ -197,14 +190,8 @@
return 0;
}
-void __init mxc_timer_init(const char *clk_timer)
+void __init mxc_timer_init(struct clk *timer_clk)
{
- timer_clk = clk_get(NULL, clk_timer);
- if (!timer_clk) {
- printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
- return;
- }
-
clk_enable(timer_clk);
/*
@@ -219,10 +206,9 @@
TIMER_BASE + MXC_TCTL);
/* init and register the timer to the framework */
- mxc_clocksource_init();
- mxc_clockevent_init();
+ mxc_clocksource_init(timer_clk);
+ mxc_clockevent_init(timer_clk);
/* Make irqs happen */
setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
}
-
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 46d3b0b..9dd68fa 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,14 +11,17 @@
config ARCH_OMAP1
bool "TI OMAP1"
+ select COMMON_CLKDEV
config ARCH_OMAP2
bool "TI OMAP2"
select CPU_V6
+ select COMMON_CLKDEV
config ARCH_OMAP3
bool "TI OMAP3"
select CPU_V7
+ select COMMON_CLKDEV
endchoice
@@ -104,6 +107,14 @@
Say Y here if you want support for the OMAP Multichannel
Buffered Serial Port.
+config OMAP_MBOX_FWK
+ tristate "Mailbox framework support"
+ depends on ARCH_OMAP
+ default n
+ help
+ Say Y here if you want to use OMAP Mailbox framework support for
+ DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+
choice
prompt "System timer"
default OMAP_MPU_TIMER
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index deaff58..04a100c 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -18,7 +18,8 @@
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index be6aab9..2e06145 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,44 +36,6 @@
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk * clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
@@ -114,22 +76,6 @@
}
EXPORT_SYMBOL(clk_disable);
-int clk_get_usecount(struct clk *clk)
-{
- unsigned long flags;
- int ret = 0;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = clk->usecount;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_get_usecount);
-
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long flags;
@@ -146,13 +92,6 @@
}
EXPORT_SYMBOL(clk_get_rate);
-void clk_put(struct clk *clk)
-{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
/*-------------------------------------------------------------------------
* Optional clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
@@ -185,6 +124,11 @@
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_set_rate)
ret = arch_clock->clk_set_rate(clk, rate);
+ if (ret == 0) {
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ }
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -200,8 +144,16 @@
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_set_parent)
- ret = arch_clock->clk_set_parent(clk, parent);
+ if (clk->usecount == 0) {
+ if (arch_clock->clk_set_parent)
+ ret = arch_clock->clk_set_parent(clk, parent);
+ if (ret == 0) {
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ }
+ } else
+ ret = -EBUSY;
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -210,18 +162,7 @@
struct clk *clk_get_parent(struct clk *clk)
{
- unsigned long flags;
- struct clk * ret = NULL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_get_parent)
- ret = arch_clock->clk_get_parent(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
+ return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
@@ -250,14 +191,20 @@
__setup("mpurate=", omap_clk_setup);
/* Used for clocks that always have same value as the parent clock */
-void followparent_recalc(struct clk *clk)
+unsigned long followparent_recalc(struct clk *clk)
{
- if (clk == NULL || IS_ERR(clk))
- return;
+ return clk->parent->rate;
+}
- clk->rate = clk->parent->rate;
- if (unlikely(clk->flags & RATE_PROPAGATES))
- propagate_rate(clk);
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
}
/* Propagate rate to children */
@@ -265,17 +212,15 @@
{
struct clk *clkp;
- if (tclk == NULL || IS_ERR(tclk))
- return;
-
- list_for_each_entry(clkp, &clocks, node) {
- if (likely(clkp->parent != tclk))
- continue;
- if (likely((u32)clkp->recalc))
- clkp->recalc(clkp);
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
}
}
+static LIST_HEAD(root_clks);
+
/**
* recalculate_root_clocks - recalculate and propagate all root clocks
*
@@ -287,18 +232,35 @@
{
struct clk *clkp;
- list_for_each_entry(clkp, &clocks, node) {
- if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
- clkp->recalc(clkp);
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
}
}
+void clk_init_one(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
int clk_register(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
list_add(&clk->node, &clocks);
if (clk->init)
clk->init(clk);
@@ -314,39 +276,12 @@
return;
mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
list_del(&clk->node);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
-void clk_deny_idle(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_deny_idle)
- arch_clock->clk_deny_idle(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_deny_idle);
-
-void clk_allow_idle(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_allow_idle)
- arch_clock->clk_allow_idle(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_allow_idle);
-
void clk_enable_init_clocks(void)
{
struct clk *clkp;
@@ -358,6 +293,23 @@
}
EXPORT_SYMBOL(clk_enable_init_clocks);
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
#ifdef CONFIG_CPU_FREQ
void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
@@ -383,8 +335,10 @@
unsigned long flags;
list_for_each_entry(ck, &clocks, node) {
- if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
- ck->enable_reg == 0)
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || ck->enable_reg == 0)
continue;
spin_lock_irqsave(&clockfw_lock, flags);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 0843b88..d179714 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -200,20 +200,16 @@
};
/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
- return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
-/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
- return omap_32k_ticks_to_nsecs(omap_32k_read());
+ unsigned long long ret;
+
+ ret = (unsigned long long)omap_32k_read();
+ ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+ return ret;
}
static int __init omap_init_clocksource_32k(void)
@@ -249,7 +245,7 @@
static void __init __omap2_set_globals(void)
{
omap2_set_globals_tap(omap2_globals);
- omap2_set_globals_memory(omap2_globals);
+ omap2_set_globals_sdrc(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
}
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index b269024..843e8af 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,10 +23,13 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/clock.h>
#include <asm/system.h>
#define VERY_HI_RATE 900000000
+static struct cpufreq_frequency_table *freq_table;
+
#ifdef CONFIG_ARCH_OMAP1
#define MPU_CLK "mpu"
#else
@@ -39,6 +42,9 @@
int omap_verify_speed(struct cpufreq_policy *policy)
{
+ if (freq_table)
+ return cpufreq_frequency_table_verify(policy, freq_table);
+
if (policy->cpu)
return -EINVAL;
@@ -70,12 +76,26 @@
struct cpufreq_freqs freqs;
int ret = 0;
+ /* Ensure desired rate is within allowed range. Some govenors
+ * (ondemand) will just pass target_freq=0 to get the minimum. */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
freqs.cpu = 0;
+ if (freqs.old == freqs.new)
+ return ret;
+
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- ret = clk_set_rate(mpu_clk, target_freq * 1000);
+#ifdef CONFIG_CPU_FREQ_DEBUG
+ printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
+ freqs.old, freqs.new);
+#endif
+ ret = clk_set_rate(mpu_clk, freqs.new * 1000);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
@@ -83,16 +103,31 @@
static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
+ int result = 0;
+
mpu_clk = clk_get(NULL, MPU_CLK);
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
if (policy->cpu != 0)
return -EINVAL;
+
policy->cur = policy->min = policy->max = omap_getspeed(0);
- policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
- policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+
+ clk_init_cpufreq_table(&freq_table);
+ if (freq_table) {
+ result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!result)
+ cpufreq_frequency_table_get_attr(freq_table,
+ policy->cpu);
+ } else {
+ policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
+ policy->cpuinfo.max_freq = clk_round_rate(mpu_clk,
+ VERY_HI_RATE) / 1000;
+ }
+
+ /* FIXME: what's the actual transition time? */
+ policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
return 0;
}
@@ -103,6 +138,11 @@
return 0;
}
+static struct freq_attr *omap_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = omap_verify_speed,
@@ -111,6 +151,7 @@
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.name = "omap",
+ .attr = omap_cpufreq_attr,
};
static int __init omap_cpufreq_init(void)
@@ -119,3 +160,11 @@
}
arch_initcall(omap_cpufreq_init);
+
+/*
+ * if ever we want to remove this, upon cleanup call:
+ *
+ * cpufreq_unregister_driver()
+ * cpufreq_frequency_table_put_attr()
+ */
+
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 208dbb1..87fb7ff 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -228,6 +228,9 @@
ret = platform_device_add(pdev);
if (ret)
goto fail;
+
+ /* return device handle to board setup code */
+ data->dev = &pdev->dev;
return 0;
fail:
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 47ec77a..21cc014 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -123,6 +123,7 @@
static int dma_lch_count;
static int dma_chan_count;
+static int omap_dma_reserve_channels;
static spinlock_t dma_chan_lock;
static struct omap_dma_lch *dma_chan;
@@ -737,7 +738,7 @@
* id.
*/
dma_write(dev_id | (1 << 10), CCR(free_ch));
- } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
+ } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
dma_write(dev_id, CCR(free_ch));
}
@@ -1900,7 +1901,7 @@
/* STATUS register count is from 1-32 while our is 0-31 */
static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
- u32 val;
+ u32 val, enable_reg;
int i;
val = dma_read(IRQSTATUS_L0);
@@ -1909,6 +1910,8 @@
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
+ enable_reg = dma_read(IRQENABLE_L0);
+ val &= enable_reg; /* Dispatch only relevant interrupts */
for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
omap2_dma_handle_ch(i);
@@ -2321,6 +2324,10 @@
return -ENODEV;
}
+ if (cpu_class_is_omap2() && omap_dma_reserve_channels
+ && (omap_dma_reserve_channels <= dma_lch_count))
+ dma_lch_count = omap_dma_reserve_channels;
+
dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
GFP_KERNEL);
if (!dma_chan)
@@ -2339,7 +2346,7 @@
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
enable_1510_mode = 1;
- } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
+ } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
printk(KERN_INFO "OMAP DMA hardware version %d\n",
dma_read(HW_ID));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
@@ -2371,7 +2378,7 @@
u8 revision = dma_read(REVISION) & 0xff;
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
revision >> 4, revision & 0xf);
- dma_chan_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ dma_chan_count = dma_lch_count;
} else {
dma_chan_count = 0;
return 0;
@@ -2437,4 +2444,17 @@
arch_initcall(omap_init_dma);
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+ if (get_option(&str, &omap_dma_reserve_channels) != 1)
+ omap_dma_reserve_channels = 0;
+ return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index e4f0ce0..bfd4757 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -33,6 +33,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <mach/dmtimer.h>
#include <mach/irqs.h>
@@ -362,6 +363,7 @@
return timer;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request);
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
@@ -385,6 +387,7 @@
return timer;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
void omap_dm_timer_free(struct omap_dm_timer *timer)
{
@@ -395,6 +398,7 @@
WARN_ON(!timer->reserved);
timer->reserved = 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_free);
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
@@ -406,6 +410,7 @@
timer->enabled = 1;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
@@ -417,11 +422,13 @@
timer->enabled = 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
return timer->irq;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
@@ -452,6 +459,7 @@
return inputmask;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
@@ -459,6 +467,7 @@
{
return timer->fclk;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
@@ -466,6 +475,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
#endif
@@ -473,6 +483,7 @@
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
void omap_dm_timer_start(struct omap_dm_timer *timer)
{
@@ -484,6 +495,7 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_start);
void omap_dm_timer_stop(struct omap_dm_timer *timer)
{
@@ -495,6 +507,7 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
#ifdef CONFIG_ARCH_OMAP1
@@ -507,6 +520,7 @@
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
@@ -523,6 +537,7 @@
* cause an abort. */
__delay(150000);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#endif
@@ -541,6 +556,7 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
@@ -560,6 +576,7 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
@@ -574,6 +591,7 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
@@ -590,6 +608,7 @@
l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
@@ -603,6 +622,7 @@
}
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
@@ -610,6 +630,7 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
{
@@ -619,11 +640,13 @@
return l;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
@@ -633,11 +656,13 @@
return l;
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
}
+EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
@@ -658,6 +683,7 @@
}
return 0;
}
+EXPORT_SYMBOL_GPL(omap_dm_timers_active);
int __init omap_dm_timer_init(void)
{
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f856a90..d3fa41e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -81,6 +81,22 @@
#define OMAP730_GPIO_INT_STATUS 0x14
/*
+ * OMAP850 specific GPIO registers
+ */
+#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO_DATA_INPUT 0x00
+#define OMAP850_GPIO_DATA_OUTPUT 0x04
+#define OMAP850_GPIO_DIR_CONTROL 0x08
+#define OMAP850_GPIO_INT_CONTROL 0x0c
+#define OMAP850_GPIO_INT_MASK 0x10
+#define OMAP850_GPIO_INT_STATUS 0x14
+
+/*
* omap24xx specific GPIO registers
*/
#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000)
@@ -159,7 +175,8 @@
#define METHOD_GPIO_1510 1
#define METHOD_GPIO_1610 2
#define METHOD_GPIO_730 3
-#define METHOD_GPIO_24XX 4
+#define METHOD_GPIO_850 4
+#define METHOD_GPIO_24XX 5
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
@@ -190,6 +207,19 @@
};
#endif
+#ifdef CONFIG_ARCH_OMAP850
+static struct gpio_bank gpio_bank_850[7] = {
+ { OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
+ { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
+ { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
+ { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 },
+ { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+ { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+};
+#endif
+
+
#ifdef CONFIG_ARCH_OMAP24XX
static struct gpio_bank gpio_bank_242x[4] = {
@@ -236,7 +266,7 @@
return &gpio_bank[0];
return &gpio_bank[1 + (gpio >> 4)];
}
- if (cpu_is_omap730()) {
+ if (cpu_is_omap7xx()) {
if (OMAP_GPIO_IS_MPUIO(gpio))
return &gpio_bank[0];
return &gpio_bank[1 + (gpio >> 5)];
@@ -251,7 +281,7 @@
static inline int get_gpio_index(int gpio)
{
- if (cpu_is_omap730())
+ if (cpu_is_omap7xx())
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
@@ -273,7 +303,7 @@
return 0;
if ((cpu_is_omap16xx()) && gpio < 64)
return 0;
- if (cpu_is_omap730() && gpio < 192)
+ if (cpu_is_omap7xx() && gpio < 192)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
@@ -318,6 +348,11 @@
reg += OMAP730_GPIO_DIR_CONTROL;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
@@ -380,6 +415,16 @@
l &= ~(1 << gpio);
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_OUTPUT;
+ l = __raw_readl(reg);
+ if (enable)
+ l |= 1 << gpio;
+ else
+ l &= ~(1 << gpio);
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
@@ -426,6 +471,11 @@
reg += OMAP730_GPIO_DATA_INPUT;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DATA_INPUT;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
@@ -598,6 +648,18 @@
goto bad;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_CONTROL;
+ l = __raw_readl(reg);
+ if (trigger & IRQ_TYPE_EDGE_RISING)
+ l |= 1 << gpio;
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
+ l &= ~(1 << gpio);
+ else
+ goto bad;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -678,6 +740,11 @@
reg += OMAP730_GPIO_INT_STATUS;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_STATUS;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
@@ -736,6 +803,13 @@
inv = 1;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_MASK;
+ mask = 0xffffffff;
+ inv = 1;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
@@ -799,6 +873,16 @@
l |= gpio_mask;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_INT_MASK;
+ l = __raw_readl(reg);
+ if (enable)
+ l &= ~(gpio_mask);
+ else
+ l |= gpio_mask;
+ break;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
if (enable)
@@ -983,6 +1067,10 @@
if (bank->method == METHOD_GPIO_730)
isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ if (bank->method == METHOD_GPIO_850)
+ isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
@@ -1372,6 +1460,13 @@
gpio_bank = gpio_bank_730;
}
#endif
+#ifdef CONFIG_ARCH_OMAP850
+ if (cpu_is_omap850()) {
+ printk(KERN_INFO "OMAP850 GPIO hardware\n");
+ gpio_bank_count = 7;
+ gpio_bank = gpio_bank_850;
+ }
+#endif
#ifdef CONFIG_ARCH_OMAP24XX
if (cpu_is_omap242x()) {
@@ -1420,7 +1515,7 @@
__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
}
- if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) {
+ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
@@ -1743,6 +1838,9 @@
case METHOD_GPIO_730:
reg += OMAP730_GPIO_DIR_CONTROL;
break;
+ case METHOD_GPIO_850:
+ reg += OMAP850_GPIO_DIR_CONTROL;
+ break;
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
@@ -1762,7 +1860,8 @@
if (bank_is_mpuio(bank))
gpio = OMAP_MPUIO(0);
- else if (cpu_class_is_omap2() || cpu_is_omap730())
+ else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+ cpu_is_omap850())
bankwidth = 32;
for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 467531e..a303071 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -98,6 +98,8 @@
static const int omap34xx_pins[][2] = {};
#endif
+#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+
static void __init omap_i2c_mux_pins(int bus)
{
int scl, sda;
@@ -119,14 +121,9 @@
omap_cfg_reg(scl);
}
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
- struct i2c_board_info const *info,
- unsigned len)
+static int __init omap_i2c_nr_ports(void)
{
- int ports, err;
- struct platform_device *pdev;
- struct resource *res;
- resource_size_t base, irq;
+ int ports = 0;
if (cpu_class_is_omap1())
ports = 1;
@@ -135,17 +132,16 @@
else if (cpu_is_omap34xx())
ports = 3;
- BUG_ON(bus_id < 1 || bus_id > ports);
+ return ports;
+}
- if (info) {
- err = i2c_register_board_info(bus_id, info, len);
- if (err)
- return err;
- }
+static int __init omap_i2c_add_bus(int bus_id)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ resource_size_t base, irq;
pdev = &omap_i2c_devices[bus_id - 1];
- *(u32 *)pdev->dev.platform_data = clkrate;
-
if (bus_id == 1) {
res = pdev->resource;
if (cpu_class_is_omap1()) {
@@ -163,3 +159,81 @@
omap_i2c_mux_pins(bus_id - 1);
return platform_device_register(pdev);
}
+
+/**
+ * omap_i2c_bus_setup - Process command line options for the I2C bus speed
+ * @str: String of options
+ *
+ * This function allow to override the default I2C bus speed for given I2C
+ * bus with a command line option.
+ *
+ * Format: i2c_bus=bus_id,clkrate (in kHz)
+ *
+ * Returns 1 on success, 0 otherwise.
+ */
+static int __init omap_i2c_bus_setup(char *str)
+{
+ int ports;
+ int ints[3];
+
+ ports = omap_i2c_nr_ports();
+ get_options(str, 3, ints);
+ if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+ return 0;
+ i2c_rate[ints[1] - 1] = ints[2];
+ i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+
+ return 1;
+}
+__setup("i2c_bus=", omap_i2c_bus_setup);
+
+/*
+ * Register busses defined in command line but that are not registered with
+ * omap_register_i2c_bus from board initialization code.
+ */
+static int __init omap_register_i2c_bus_cmdline(void)
+{
+ int i, err = 0;
+
+ for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
+ if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
+ i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+ err = omap_i2c_add_bus(i + 1);
+ if (err)
+ goto out;
+ }
+
+out:
+ return err;
+}
+subsys_initcall(omap_register_i2c_bus_cmdline);
+
+/**
+ * omap_register_i2c_bus - register I2C bus with device descriptors
+ * @bus_id: bus id counting from number 1
+ * @clkrate: clock rate of the bus in kHz
+ * @info: pointer into I2C device descriptor table or NULL
+ * @len: number of descriptors in the table
+ *
+ * Returns 0 on success or an error code.
+ */
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+ struct i2c_board_info const *info,
+ unsigned len)
+{
+ int err;
+
+ BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+
+ if (info) {
+ err = i2c_register_board_info(bus_id, info, len);
+ if (err)
+ return err;
+ }
+
+ if (!i2c_rate[bus_id - 1])
+ i2c_rate[bus_id - 1] = clkrate;
+ i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+
+ return omap_i2c_add_bus(bus_id);
+}
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
deleted file mode 100644
index 10d449e..0000000
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-2430sdp.h
- *
- * Hardware definitions for TI OMAP2430 SDP board.
- *
- * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_2430SDP_H
-#define __ASM_ARCH_OMAP_2430SDP_H
-
-/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
-#define OMAP24XX_ETHR_GPIO_IRQ 149
-#define SDP2430_CS0_BASE 0x04000000
-
-/* Function prototypes */
-extern void sdp2430_flash_init(void);
-extern void sdp2430_usb_init(void);
-
-#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
deleted file mode 100644
index 61bd5e8..0000000
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-apollon.h
- *
- * Hardware definitions for Samsung OMAP24XX Apollon board.
- *
- * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_APOLLON_H
-#define __ASM_ARCH_OMAP_APOLLON_H
-
-#include <mach/cpu.h>
-
-extern void apollon_mmc_init(void);
-
-static inline int apollon_plus(void)
-{
- /* The apollon plus has IDCODE revision 5 */
- return omap_rev() & 0xc0;
-}
-
-/* Placeholder for APOLLON specific defines */
-#define APOLLON_ETHR_GPIO_IRQ 74
-
-#endif /* __ASM_ARCH_OMAP_APOLLON_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
deleted file mode 100644
index cb3c5ae..0000000
--- a/arch/arm/plat-omap/include/mach/board-fsample.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <mach/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE 0xE8100000
-#define FSAMPLE_CPLD_SIZE SZ_4K
-#define FSAMPLE_CPLD_START 0x05080000
-
-#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET 0
-#define FSAMPLE_CPLD_BIT_LCD_RESET 1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
-#define FSAMPLE_CPLD_BIT_OTG_RESET 9
-
-#define fsample_cpld_set(bit) \
- fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
- fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
deleted file mode 100644
index 7c3fa0f..0000000
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-h4.h
- *
- * Hardware definitions for TI OMAP2420 H4 board.
- *
- * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H4_H
-#define __ASM_ARCH_OMAP_H4_H
-
-/* MMC Prototypes */
-extern void h4_mmc_init(void);
-
-/* Placeholder for H4 specific defines */
-#define OMAP24XX_ETHR_GPIO_IRQ 92
-#endif /* __ASM_ARCH_OMAP_H4_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
deleted file mode 100644
index 5ae3e79..0000000
--- a/arch/arm/plat-omap/include/mach/board-innovator.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-innovator.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
-#define __ASM_ARCH_OMAP_INNOVATOR_H
-
-#if defined (CONFIG_ARCH_OMAP15XX)
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE D256M_1X16_4B
-#endif
-
-#define OMAP1510P1_IMIF_PRI_VALUE 0x00
-#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
-#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
-
-#ifndef __ASSEMBLY__
-void fpga_write(unsigned char val, int reg);
-unsigned char fpga_read(int reg);
-#endif
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined (CONFIG_ARCH_OMAP16XX)
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START 0x04000300
-
-#endif /* CONFIG_ARCH_OMAP1610 */
-#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h
deleted file mode 100644
index f233996..0000000
--- a/arch/arm/plat-omap/include/mach/board-ldp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-ldp.h
- *
- * Hardware definitions for TI OMAP3 LDP.
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_LDP_H
-#define __ASM_ARCH_OMAP_LDP_H
-
-extern void twl4030_bci_battery_init(void);
-
-#define TWL4030_IRQNUM INT_34XX_SYS_NIRQ
-#define LDP_SMC911X_CS 1
-#define LDP_SMC911X_GPIO 152
-#define DEBUG_BASE 0x08000000
-#define OMAP34XX_ETHR_START DEBUG_BASE
-#endif /* __ASM_ARCH_OMAP_LDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
deleted file mode 100644
index 2abbe00..0000000
--- a/arch/arm/plat-omap/include/mach/board-nokia.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-nokia.h
- *
- * Information structures for Nokia-specific board config data
- *
- * Copyright (C) 2005 Nokia Corporation
- */
-
-#ifndef _OMAP_BOARD_NOKIA_H
-#define _OMAP_BOARD_NOKIA_H
-
-#include <linux/types.h>
-
-#define OMAP_TAG_NOKIA_BT 0x4e01
-#define OMAP_TAG_WLAN_CX3110X 0x4e02
-#define OMAP_TAG_CBUS 0x4e03
-#define OMAP_TAG_EM_ASIC_BB5 0x4e04
-
-
-#define BT_CHIP_CSR 1
-#define BT_CHIP_TI 2
-
-#define BT_SYSCLK_12 1
-#define BT_SYSCLK_38_4 2
-
-struct omap_bluetooth_config {
- u8 chip_type;
- u8 bt_wakeup_gpio;
- u8 host_wakeup_gpio;
- u8 reset_gpio;
- u8 bt_uart;
- u8 bd_addr[6];
- u8 bt_sysclk;
-};
-
-struct omap_wlan_cx3110x_config {
- u8 chip_type;
- s16 power_gpio;
- s16 irq_gpio;
- s16 spi_cs_gpio;
-};
-
-struct omap_cbus_config {
- s16 clk_gpio;
- s16 dat_gpio;
- s16 sel_gpio;
-};
-
-struct omap_em_asic_bb5_config {
- s16 retu_irq_gpio;
- s16 tahvo_irq_gpio;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-omap3beagle.h b/arch/arm/plat-omap/include/mach/board-omap3beagle.h
deleted file mode 100644
index 3080d52..0000000
--- a/arch/arm/plat-omap/include/mach/board-omap3beagle.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-omap3beagle.h
- *
- * Hardware definitions for TI OMAP3 BEAGLE.
- *
- * Initial creation by Syed Mohammed Khasim <khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP3_BEAGLE_H
-#define __ASM_ARCH_OMAP3_BEAGLE_H
-
-#endif /* __ASM_ARCH_OMAP3_BEAGLE_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
deleted file mode 100644
index 3850cb1..0000000
--- a/arch/arm/plat-omap/include/mach/board-osk.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-osk.h
- *
- * Hardware definitions for TI OMAP5912 OSK board.
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_OSK_H
-#define __ASM_ARCH_OMAP_OSK_H
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START 0x04800300
-
-/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0)
-# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1)
-# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2)
-# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3)
-# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4)
-# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5)
-
-#endif /* __ASM_ARCH_OMAP_OSK_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-overo.h b/arch/arm/plat-omap/include/mach/board-overo.h
deleted file mode 100644
index 7ecae66..0000000
--- a/arch/arm/plat-omap/include/mach/board-overo.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * board-overo.h (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OVERO_H
-#define __ASM_ARCH_OVERO_H
-
-#define OVERO_GPIO_BT_XGATE 15
-#define OVERO_GPIO_W2W_NRESET 16
-#define OVERO_GPIO_BT_NRESET 164
-#define OVERO_GPIO_USBH_CPEN 168
-#define OVERO_GPIO_USBH_NRESET 183
-
-#endif /* ____ASM_ARCH_OVERO_H */
-
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
deleted file mode 100644
index 6906cde..0000000
--- a/arch/arm/plat-omap/include/mach/board-palmte.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten E device.
- *
- * Maintainters : http://palmtelinux.sf.net
- * palmtelinux-developpers@lists.sf.net
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTE_H
-#define __OMAP_BOARD_PALMTE_H
-
-#define PALMTE_USBDETECT_GPIO 0
-#define PALMTE_USB_OR_DC_GPIO 1
-#define PALMTE_TSC_GPIO 4
-#define PALMTE_PINTDAV_GPIO 6
-#define PALMTE_MMC_WP_GPIO 8
-#define PALMTE_MMC_POWER_GPIO 9
-#define PALMTE_HDQ_GPIO 11
-#define PALMTE_HEADPHONES_GPIO 14
-#define PALMTE_SPEAKER_GPIO 15
-#define PALMTE_DC_GPIO OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
-
-#endif /* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
deleted file mode 100644
index e79f382..0000000
--- a/arch/arm/plat-omap/include/mach/board-palmtt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmte.h
- *
- * Hardware definitions for the Palm Tungsten|T device.
- *
- * Maintainters : Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMTT_H
-#define __OMAP_BOARD_PALMTT_H
-
-#define PALMTT_USBDETECT_GPIO 0
-#define PALMTT_CABLE_GPIO 1
-#define PALMTT_LED_GPIO 3
-#define PALMTT_PENIRQ_GPIO 6
-#define PALMTT_MMC_WP_GPIO 8
-#define PALMTT_HDQ_GPIO 11
-
-#endif /* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
deleted file mode 100644
index b1d7d57..0000000
--- a/arch/arm/plat-omap/include/mach/board-palmz71.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-palmz71.h
- *
- * Hardware definitions for the Palm Zire71 device.
- *
- * Maintainters : Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_BOARD_PALMZ71_H
-#define __OMAP_BOARD_PALMZ71_H
-
-#define PALMZ71_USBDETECT_GPIO 0
-#define PALMZ71_PENIRQ_GPIO 6
-#define PALMZ71_MMC_WP_GPIO 8
-#define PALMZ71_HDQ_GPIO 11
-
-#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
-
-#endif /* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
deleted file mode 100644
index c06c3d7..0000000
--- a/arch/arm/plat-omap/include/mach/board-perseus2.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-perseus2.h
- *
- * Copyright 2003 by Texas Instruments Incorporated
- * OMAP730 / Perseus2 support by Jean Pihet
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
-#define __ASM_ARCH_OMAP_PERSEUS2_H
-
-#include <mach/fpga.h>
-
-#ifndef OMAP_SDRAM_DEVICE
-#define OMAP_SDRAM_DEVICE D256M_1X16_4B
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
index ed6d346..27916b2 100644
--- a/arch/arm/plat-omap/include/mach/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
@@ -14,7 +14,6 @@
extern void voiceblue_wdt_enable(void);
extern void voiceblue_wdt_disable(void);
extern void voiceblue_wdt_ping(void);
-extern void voiceblue_reset(void);
#endif /* __ASM_ARCH_VOICEBLUE_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 9466772..50ea79a 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -17,7 +17,6 @@
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB 0x4f04
#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
#define OMAP_TAG_UART 0x4f07
@@ -133,9 +132,6 @@
char version[12];
};
-
-#include <mach/board-nokia.h>
-
struct omap_board_config_entry {
u16 tag;
u16 len;
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/mach/clkdev.h
new file mode 100644
index 0000000..730c49d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clkdev.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 7192985..073a2c5 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -17,11 +17,16 @@
struct clk;
struct clockdomain;
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+};
+
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
struct clksel_rate {
- u8 div;
u32 val;
+ u8 div;
u8 flags;
};
@@ -34,24 +39,28 @@
void __iomem *mult_div1_reg;
u32 mult_mask;
u32 div1_mask;
- u16 last_rounded_m;
- u8 last_rounded_n;
- unsigned long last_rounded_rate;
- unsigned int rate_tolerance;
- u16 max_multiplier;
- u8 max_divider;
- u32 max_tolerance;
-# if defined(CONFIG_ARCH_OMAP3)
- u8 modes;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
void __iomem *control_reg;
u32 enable_mask;
+ unsigned int rate_tolerance;
+ unsigned long last_rounded_rate;
+ u16 last_rounded_m;
+ u8 last_rounded_n;
+ u8 min_divider;
+ u8 max_divider;
+ u32 max_tolerance;
+ u16 max_multiplier;
+# if defined(CONFIG_ARCH_OMAP3)
+ u8 modes;
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
- void __iomem *autoidle_reg;
- u32 autoidle_mask;
- void __iomem *idlest_reg;
- u8 idlest_bit;
# endif
};
@@ -59,21 +68,21 @@
struct clk {
struct list_head node;
- struct module *owner;
+ const struct clkops *ops;
const char *name;
int id;
struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
unsigned long rate;
__u32 flags;
void __iomem *enable_reg;
- __u8 enable_bit;
- __s8 usecount;
- void (*recalc)(struct clk *);
+ unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
+ __u8 enable_bit;
+ __s8 usecount;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
u8 fixed_div;
void __iomem *clksel_reg;
@@ -99,7 +108,6 @@
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- struct clk * (*clk_get_parent)(struct clk *clk);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
@@ -110,42 +118,33 @@
extern unsigned int mpurate;
-extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_init_one(struct clk *clk);
extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void propagate_rate(struct clk *clk);
extern void recalculate_root_clocks(void);
-extern void followparent_recalc(struct clk * clk);
-extern void clk_allow_idle(struct clk *clk);
-extern void clk_deny_idle(struct clk *clk);
-extern int clk_get_usecount(struct clk *clk);
+extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
+#ifdef CONFIG_CPU_FREQ
+extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+#endif
+
+extern const struct clkops clkops_null;
/* Clock flags */
-#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
+/* bit 0 is free */
#define RATE_FIXED (1 << 1) /* Fixed clock rate */
-#define RATE_PROPAGATES (1 << 2) /* Program children too */
-#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */
-#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */
+/* bits 2-4 are free */
#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */
-#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */
#define CLOCK_IDLE_CONTROL (1 << 7)
#define CLOCK_NO_IDLE_PARENT (1 << 8)
#define DELAYED_APP (1 << 9) /* Delay application of clock */
#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
-/* bits 13-20 are currently free */
-#define CLOCK_IN_OMAP310 (1 << 21)
-#define CLOCK_IN_OMAP730 (1 << 22)
-#define CLOCK_IN_OMAP1510 (1 << 23)
-#define CLOCK_IN_OMAP16XX (1 << 24)
-#define CLOCK_IN_OMAP242X (1 << 25)
-#define CLOCK_IN_OMAP243X (1 << 26)
-#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */
-#define PARENT_CONTROLS_CLOCK (1 << 28)
-#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */
-#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */
+/* bits 13-31 are currently free */
/* Clksel_rate flags */
#define DEFAULT_RATE (1 << 0)
@@ -157,9 +156,4 @@
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K 0
-#define CORE_CLK_SRC_DPLL 1
-#define CORE_CLK_SRC_DPLL_X2 2
-
#endif
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
index 1f51f01..b9d0dd2 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -1,5 +1,5 @@
/*
- * linux/include/asm-arm/arch-omap/clockdomain.h
+ * arch/arm/plat-omap/include/mach/clockdomain.h
*
* OMAP2/3 clockdomain framework functions
*
@@ -48,11 +48,13 @@
*/
struct clkdm_pwrdm_autodep {
- /* Name of the powerdomain to add a wkdep/sleepdep on */
- const char *pwrdm_name;
+ union {
+ /* Name of the powerdomain to add a wkdep/sleepdep on */
+ const char *name;
- /* Powerdomain pointer (looked up at clkdm_init() time) */
- struct powerdomain *pwrdm;
+ /* Powerdomain pointer (looked up at clkdm_init() time) */
+ struct powerdomain *ptr;
+ } pwrdm;
/* OMAP chip types that this clockdomain dep is valid on */
const struct omap_chip_id omap_chip;
@@ -64,8 +66,13 @@
/* Clockdomain name */
const char *name;
- /* Powerdomain enclosing this clockdomain */
- const char *pwrdm_name;
+ union {
+ /* Powerdomain enclosing this clockdomain */
+ const char *name;
+
+ /* Powerdomain pointer assigned at clkdm_register() */
+ struct powerdomain *ptr;
+ } pwrdm;
/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
const u16 clktrctrl_mask;
@@ -79,9 +86,6 @@
/* Usecount tracking */
atomic_t usecount;
- /* Powerdomain pointer assigned at clkdm_register() */
- struct powerdomain *pwrdm;
-
struct list_head node;
};
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index ef70e2b..0ecf36d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -35,7 +35,7 @@
extern struct sys_timer omap_timer;
extern void omap_serial_init(void);
extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len);
@@ -65,7 +65,7 @@
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index a8e1178..98b1442 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -56,6 +56,14 @@
# define OMAP_NAME omap730
# endif
#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
@@ -105,7 +113,7 @@
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
- * cpu_is_omap7xx(): True for OMAP730
+ * cpu_is_omap7xx(): True for OMAP730, OMAP850
* cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
* cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
@@ -153,6 +161,10 @@
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
@@ -166,6 +178,10 @@
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
@@ -219,6 +235,7 @@
* These are only rarely needed.
* cpu_is_omap330(): True for OMAP330
* cpu_is_omap730(): True for OMAP730
+ * cpu_is_omap850(): True for OMAP850
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
@@ -241,6 +258,7 @@
IS_OMAP_TYPE(310, 0x0310)
IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(850, 0x0850)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
@@ -255,6 +273,7 @@
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
+#define cpu_is_omap850() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
@@ -272,12 +291,22 @@
# undef cpu_is_omap730
# define cpu_is_omap730() is_omap730()
# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() is_omap850()
+# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap730
# define cpu_is_omap730() 1
# endif
#endif
+#else
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() 1
+# endif
+#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -320,7 +349,7 @@
#endif
/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \
+#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
@@ -355,13 +384,27 @@
* use omap_chip_is().
*
*/
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
+#define CHIP_IS_OMAP2420 (1 << 0)
+#define CHIP_IS_OMAP2430 (1 << 1)
+#define CHIP_IS_OMAP3430 (1 << 2)
+#define CHIP_IS_OMAP3430ES1 (1 << 3)
+#define CHIP_IS_OMAP3430ES2 (1 << 4)
+#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
+#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+/*
+ * "GE" here represents "greater than or equal to" in terms of ES
+ * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
+ * chips at ES2 and beyond, but not, for example, any OMAP lines after
+ * OMAP3.
+ */
+#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
+ CHIP_IS_OMAP3430ES3_0 | \
+ CHIP_IS_OMAP3430ES3_1)
+#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1)
+
int omap_chip_is(struct omap_chip_id oci);
int omap_type(void);
@@ -378,5 +421,3 @@
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 8d9dfe3..2b22a87 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -31,7 +31,8 @@
#define OMAP_MPUIO_BASE 0xfffb5000
-#ifdef CONFIG_ARCH_OMAP730
+#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
+
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x02
#define OMAP_MPUIO_IO_CNTL 0x04
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 45b6784..921b165 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,6 @@
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
-extern void gpmc_init(void);
+extern void __init gpmc_init(void);
#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 6589ddb..3dc423e 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -286,78 +286,4 @@
#include "omap24xx.h"
#include "omap34xx.h"
-#ifndef __ASSEMBLER__
-
-/*
- * ---------------------------------------------------------------------------
- * Board specific defines
- * ---------------------------------------------------------------------------
- */
-
-#ifdef CONFIG_MACH_OMAP_INNOVATOR
-#include "board-innovator.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H2
-#include "board-h2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#include "board-perseus2.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_FSAMPLE
-#include "board-fsample.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H3
-#include "board-h3.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_H4
-#include "board-h4.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_2430SDP
-#include "board-2430sdp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP3_BEAGLE
-#include "board-omap3beagle.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_LDP
-#include "board-ldp.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_APOLLON
-#include "board-apollon.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_OSK
-#include "board-osk.h"
-#endif
-
-#ifdef CONFIG_MACH_VOICEBLUE
-#include "board-voiceblue.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-#include "board-palmte.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMZ71
-#include "board-palmz71.h"
-#endif
-
-#ifdef CONFIG_MACH_OMAP_PALMTT
-#include "board-palmtt.h"
-#endif
-
-#ifdef CONFIG_MACH_SX1
-#include "board-sx1.h"
-#endif
-
-#endif /* !__ASSEMBLER__ */
-
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index d92bf79..0610d7e 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -185,11 +185,13 @@
#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
+struct omap_sdrc_params;
+
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(void);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v)
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index bed5274..7f57ee6 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -105,6 +105,29 @@
#define INT_730_SPGIO_WR 29
/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_850_IH2_FIQ 0
+#define INT_850_IH2_IRQ 1
+#define INT_850_USB_NON_ISO 2
+#define INT_850_USB_ISO 3
+#define INT_850_ICR 4
+#define INT_850_EAC 5
+#define INT_850_GPIO_BANK1 6
+#define INT_850_GPIO_BANK2 7
+#define INT_850_GPIO_BANK3 8
+#define INT_850_McBSP2TX 10
+#define INT_850_McBSP2RX 11
+#define INT_850_McBSP2RX_OVF 12
+#define INT_850_LCD_LINE 14
+#define INT_850_GSM_PROTECT 15
+#define INT_850_TIMER3 16
+#define INT_850_GPIO_BANK5 17
+#define INT_850_GPIO_BANK6 18
+#define INT_850_SPGIO_WR 29
+
+
+/*
* IRQ numbers for interrupt handler 2
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
@@ -237,6 +260,64 @@
#define INT_730_DMA_CH15 (62 + IH2_BASE)
#define INT_730_NAND (63 + IH2_BASE)
+/*
+ * OMAP-850 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_850_HW_ERRORS (0 + IH2_BASE)
+#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE)
+#define INT_850_CFCD (2 + IH2_BASE)
+#define INT_850_CFIREQ (3 + IH2_BASE)
+#define INT_850_I2C (4 + IH2_BASE)
+#define INT_850_PCC (5 + IH2_BASE)
+#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE)
+#define INT_850_SPI_100K_1 (7 + IH2_BASE)
+#define INT_850_SYREN_SPI (8 + IH2_BASE)
+#define INT_850_VLYNQ (9 + IH2_BASE)
+#define INT_850_GPIO_BANK4 (10 + IH2_BASE)
+#define INT_850_McBSP1TX (11 + IH2_BASE)
+#define INT_850_McBSP1RX (12 + IH2_BASE)
+#define INT_850_McBSP1RX_OF (13 + IH2_BASE)
+#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_850_UART_MODEM_1 (15 + IH2_BASE)
+#define INT_850_MCSI (16 + IH2_BASE)
+#define INT_850_uWireTX (17 + IH2_BASE)
+#define INT_850_uWireRX (18 + IH2_BASE)
+#define INT_850_SMC_CD (19 + IH2_BASE)
+#define INT_850_SMC_IREQ (20 + IH2_BASE)
+#define INT_850_HDQ_1WIRE (21 + IH2_BASE)
+#define INT_850_TIMER32K (22 + IH2_BASE)
+#define INT_850_MMC_SDIO (23 + IH2_BASE)
+#define INT_850_UPLD (24 + IH2_BASE)
+#define INT_850_USB_HHC_1 (27 + IH2_BASE)
+#define INT_850_USB_HHC_2 (28 + IH2_BASE)
+#define INT_850_USB_GENI (29 + IH2_BASE)
+#define INT_850_USB_OTG (30 + IH2_BASE)
+#define INT_850_CAMERA_IF (31 + IH2_BASE)
+#define INT_850_RNG (32 + IH2_BASE)
+#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_850_DBB_RF_EN (34 + IH2_BASE)
+#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE)
+#define INT_850_SHA1_MD5 (36 + IH2_BASE)
+#define INT_850_SPI_100K_2 (37 + IH2_BASE)
+#define INT_850_RNG_IDLE (38 + IH2_BASE)
+#define INT_850_MPUIO (39 + IH2_BASE)
+#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
+#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_850_LLPC_OE_RISING (42 + IH2_BASE)
+#define INT_850_LLPC_VSYNC (43 + IH2_BASE)
+#define INT_850_WAKE_UP_REQ (46 + IH2_BASE)
+#define INT_850_DMA_CH6 (53 + IH2_BASE)
+#define INT_850_DMA_CH7 (54 + IH2_BASE)
+#define INT_850_DMA_CH8 (55 + IH2_BASE)
+#define INT_850_DMA_CH9 (56 + IH2_BASE)
+#define INT_850_DMA_CH10 (57 + IH2_BASE)
+#define INT_850_DMA_CH11 (58 + IH2_BASE)
+#define INT_850_DMA_CH12 (59 + IH2_BASE)
+#define INT_850_DMA_CH13 (60 + IH2_BASE)
+#define INT_850_DMA_CH14 (61 + IH2_BASE)
+#define INT_850_DMA_CH15 (62 + IH2_BASE)
+#define INT_850_NAND (63 + IH2_BASE)
+
#define INT_24XX_SYS_NIRQ 7
#define INT_24XX_SDMA_IRQ0 12
#define INT_24XX_SDMA_IRQ1 13
@@ -341,7 +422,7 @@
#define INT_34XX_BENCH_MPU_EMUL 3
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
index 7cbed93..b7a6991 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -33,6 +33,9 @@
void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+ /* ctx */
+ void (*save_ctx)(struct omap_mbox *mbox);
+ void (*restore_ctx)(struct omap_mbox *mbox);
};
struct omap_mbox_queue {
@@ -53,7 +56,7 @@
mbox_msg_t seq_snd, seq_rcv;
- struct device dev;
+ struct device *dev;
struct omap_mbox *next;
void *priv;
@@ -67,7 +70,27 @@
struct omap_mbox *omap_mbox_get(const char *);
void omap_mbox_put(struct omap_mbox *);
-int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox *);
int omap_mbox_unregister(struct omap_mbox *);
+static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->save_ctx) {
+ dev_err(mbox->dev, "%s:\tno save\n", __func__);
+ return;
+ }
+
+ mbox->ops->save_ctx(mbox);
+}
+
+static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->restore_ctx) {
+ dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+ return;
+ }
+
+ mbox->ops->restore_ctx(mbox);
+}
+
#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 113c246..bb154ea 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -344,8 +344,6 @@
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
- char const **clk_names;
- int num_clks;
};
struct omap_mcbsp {
@@ -377,8 +375,8 @@
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
- struct clk **clks;
- int num_clks;
+ struct clk *iclk;
+ struct clk *fclk;
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index d6b5ca6..99ed564 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -61,9 +61,11 @@
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \
- (dma_addr_t)virt_to_lbus(page_address(page)) : \
- (dma_addr_t)__virt_to_phys(page_address(page));})
+#define __arch_page_to_dma(dev, page) \
+ ({ dma_addr_t __dma = page_to_phys(page); \
+ if (is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+ __dma; })
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 73a9e15..4435bd4 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -37,6 +37,8 @@
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
/* number of slots per controller */
unsigned nr_slots:2;
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index f4362b8..85a6217 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -61,6 +61,16 @@
.pull_bit = bit, \
.pull_val = status,
+#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
+ .mux_reg = OMAP850_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \
+ .pull_reg = OMAP850_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
#else
#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -83,6 +93,15 @@
.pull_bit = bit, \
.pull_val = status,
+#define MUX_REG_850(reg, mode_offset, mode) \
+ .mux_reg = OMAP850_IO_CONF_##reg, \
+ .mask_offset = mode_offset, \
+ .mask = mode,
+
+#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \
+ .pull_bit = bit, \
+ .pull_val = status,
+
#endif /* CONFIG_OMAP_MUX_DEBUG */
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
@@ -98,7 +117,7 @@
/*
- * OMAP730 has a slightly different config for the pin mux.
+ * OMAP730/850 has a slightly different config for the pin mux.
* - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
@@ -114,6 +133,17 @@
PU_PD_REG(NA, 0) \
},
+#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \
+ pull_bit, pull_status, debug_status)\
+{ \
+ .name = desc, \
+ .debug = debug_status, \
+ MUX_REG_850(mux_reg, mode_offset, mode) \
+ PULL_REG_850(mux_reg, pull_bit, pull_status) \
+ PU_PD_REG(NA, 0) \
+},
+
+
#define MUX_CFG_24XX(desc, reg_offset, mode, \
pull_en, pull_mode, dbg) \
{ \
@@ -221,6 +251,26 @@
W17_730_USB_VBUSI,
};
+enum omap850_index {
+ /* OMAP 850 keyboard */
+ E2_850_KBR0,
+ J7_850_KBR1,
+ E1_850_KBR2,
+ F3_850_KBR3,
+ D2_850_KBR4,
+ C2_850_KBC0,
+ D3_850_KBC1,
+ E4_850_KBC2,
+ F4_850_KBC3,
+ E3_850_KBC4,
+
+ /* USB */
+ AA17_850_USB_DM,
+ W16_850_USB_PU_EN,
+ W17_850_USB_VBUSI,
+};
+
+
enum omap1xxx_index {
/* UART1 (BT_UART_GATING)*/
UART1_TX = 0,
@@ -788,7 +838,20 @@
* - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
* - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
*/
+ AF26_34XX_GPIO0,
+ AF22_34XX_GPIO9,
AH8_34XX_GPIO29,
+ U8_34XX_GPIO54_OUT,
+ U8_34XX_GPIO54_DOWN,
+ L8_34XX_GPIO63,
+ G25_34XX_GPIO86_OUT,
+ AG4_34XX_GPIO134_OUT,
+ AE4_34XX_GPIO136_OUT,
+ AF6_34XX_GPIO140_UP,
+ AE6_34XX_GPIO141,
+ AF5_34XX_GPIO142,
+ AE5_34XX_GPIO143,
+ H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
};
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index 8e0479f..1b1c35d 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -49,6 +49,33 @@
#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE
#define OMAP34XX_IC_BASE 0x48200000
+
+#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970)
+
+#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
+#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
+#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF)
+#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7)
+#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047)
+#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F)
+#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F)
+#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
+#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
+#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
+#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F)
+#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+
#define OMAP34XX_IVA_INTC_BASE 0x40000000
#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
@@ -61,6 +88,7 @@
#define OMAP2_CM_BASE OMAP3430_CM_BASE
#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/mach/omap850.h
new file mode 100644
index 0000000..c33f679
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap850.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap850.h
+ *
+ * Hardware definitions for TI OMAP850 processor.
+ *
+ * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP850_H
+#define __ASM_ARCH_OMAP850_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP850_DSP_BASE 0xE0000000
+#define OMAP850_DSP_SIZE 0x50000
+#define OMAP850_DSP_START 0xE0000000
+
+#define OMAP850_DSPREG_BASE 0xE1000000
+#define OMAP850_DSPREG_SIZE SZ_128K
+#define OMAP850_DSPREG_START 0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_CONFIG_BASE 0xfffe1000
+#define OMAP850_IO_CONF_0 0xfffe1070
+#define OMAP850_IO_CONF_1 0xfffe1074
+#define OMAP850_IO_CONF_2 0xfffe1078
+#define OMAP850_IO_CONF_3 0xfffe107c
+#define OMAP850_IO_CONF_4 0xfffe1080
+#define OMAP850_IO_CONF_5 0xfffe1084
+#define OMAP850_IO_CONF_6 0xfffe1088
+#define OMAP850_IO_CONF_7 0xfffe108c
+#define OMAP850_IO_CONF_8 0xfffe1090
+#define OMAP850_IO_CONF_9 0xfffe1094
+#define OMAP850_IO_CONF_10 0xfffe1098
+#define OMAP850_IO_CONF_11 0xfffe109c
+#define OMAP850_IO_CONF_12 0xfffe10a0
+#define OMAP850_IO_CONF_13 0xfffe10a4
+
+#define OMAP850_MODE_1 0xfffe1010
+#define OMAP850_MODE_2 0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP850_MODE2_OFFSET 0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_FLASH_CFG_0 0xfffecc10
+#define OMAP850_FLASH_ACFG_0 0xfffecc50
+#define OMAP850_FLASH_CFG_1 0xfffecc14
+#define OMAP850_FLASH_ACFG_1 0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_ICR_BASE 0xfffbb800
+#define OMAP850_DSP_M_CTL 0xfffbb804
+#define OMAP850_DSP_MMU_BASE 0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900)
+#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /* __ASM_ARCH_OMAP850_H */
+
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 2a9c27a..ce6ee79 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -108,7 +108,7 @@
!defined(CONFIG_ARCH_OMAP15XX) && \
!defined(CONFIG_ARCH_OMAP16XX) && \
!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
#endif
#ifndef __ASSEMBLER__
@@ -118,18 +118,6 @@
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
-/**
- * clk_deny_idle - Prevents the clock from being idled during MPU idle
- * @clk: clock signal handle
- */
-void clk_deny_idle(struct clk *clk);
-
-/**
- * clk_allow_idle - Counters previous clk_deny_idle
- * @clk: clock signal handle
- */
-void clk_allow_idle(struct clk *clk);
-
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
extern void omap730_cpu_suspend(unsigned short, unsigned short);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 2806a9c..69c9e67 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -50,9 +50,9 @@
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain is probably the worst case.
+ * CORE powerdomain on OMAP3 is the worst case
*/
-#define PWRDM_MAX_CLKDMS 3
+#define PWRDM_MAX_CLKDMS 4
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
@@ -145,6 +145,7 @@
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 56eba0f..24ac3c7 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -20,10 +20,11 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
-#define __ASM_ARM_ARCH_DPM_PRCM_H
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
u32 omap_prcm_get_reset_sources(void);
+void omap_prcm_arch_reset(char mode);
#endif
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index a98c6c3..adc7352 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -4,10 +4,12 @@
/*
* OMAP2/3 SDRC/SMS register definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -64,14 +66,62 @@
* SMS register access
*/
-
-#define OMAP242X_SMS_REGADDR(reg) IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) \
+ (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */
#define SMS_SYSCONFIG 0x010
/* REVISIT: fill in other SMS registers here */
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip. These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files. The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+ unsigned long rate;
+ u32 actim_ctrla;
+ u32 actim_ctrlb;
+ u32 rfr_ctrl;
+ u32 mr;
+};
+
+void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
+struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif /* CONFIG_ARCH_OMAP2 */
+
+#endif /* __ASSEMBLER__ */
+
#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06923f2..1060e34 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -9,12 +9,14 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
+#include <mach/prcm.h>
+
#ifndef CONFIG_MACH_VOICEBLUE
#define voiceblue_reset() do {} while (0)
+#else
+extern void voiceblue_reset(void);
#endif
-extern void omap_prcm_arch_reset(char mode);
-
static inline void arch_idle(void)
{
cpu_do_idle();
@@ -38,7 +40,7 @@
omap_writew(1, ARM_RSTCT1);
}
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
{
if (!cpu_class_is_omap2())
omap1_arch_reset(mode);
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index a56a610..69f0cee 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,8 +27,18 @@
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
+#ifdef CONFIG_USB_MUSB_SOC
+extern void usb_musb_init(void);
+#else
+static inline void usb_musb_init(void)
+{
+}
#endif
+#endif
+
+void omap_usb_init(struct omap_usb_config *pdata);
+
/*-------------------------------------------------------------------------*/
/*
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index b52ce05..0abfbaa 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -1,10 +1,9 @@
/*
* OMAP mailbox driver
*
- * Copyright (C) 2006 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
*
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- * Restructured by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -22,21 +21,98 @@
*
*/
-#include <linux/init.h>
#include <linux/module.h>
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/blkdev.h>
-#include <linux/err.h>
#include <linux/delay.h>
-#include <linux/io.h>
+
#include <mach/mailbox.h>
-#include "mailbox.h"
+
+static int enable_seq_bit;
+module_param(enable_seq_bit, bool, 0);
+MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
static struct omap_mbox *mboxes;
static DEFINE_RWLOCK(mboxes_lock);
+/*
+ * Mailbox sequence bit API
+ */
+
+/* seq_rcv should be initialized with any value other than
+ * 0 and 1 << 31, to allow either value for the first
+ * message. */
+static inline void mbox_seq_init(struct omap_mbox *mbox)
+{
+ if (!enable_seq_bit)
+ return;
+
+ /* any value other than 0 and 1 << 31 */
+ mbox->seq_rcv = 0xffffffff;
+}
+
+static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
+{
+ if (!enable_seq_bit)
+ return;
+
+ /* add seq_snd to msg */
+ *msg = (*msg & 0x7fffffff) | mbox->seq_snd;
+ /* flip seq_snd */
+ mbox->seq_snd ^= 1 << 31;
+}
+
+static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+ mbox_msg_t seq;
+
+ if (!enable_seq_bit)
+ return 0;
+
+ seq = msg & (1 << 31);
+ if (seq == mbox->seq_rcv)
+ return -1;
+ mbox->seq_rcv = seq;
+ return 0;
+}
+
+/* Mailbox FIFO handle functions */
+static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_read(mbox);
+}
+static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+{
+ mbox->ops->fifo_write(mbox, msg);
+}
+static inline int mbox_fifo_empty(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_empty(mbox);
+}
+static inline int mbox_fifo_full(struct omap_mbox *mbox)
+{
+ return mbox->ops->fifo_full(mbox);
+}
+
+/* Mailbox IRQ handle functions */
+static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->enable_irq(mbox, irq);
+}
+static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->disable_irq(mbox, irq);
+}
+static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ if (mbox->ops->ack_irq)
+ mbox->ops->ack_irq(mbox, irq);
+}
+static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ return mbox->ops->is_irq(mbox, irq);
+}
+
/* Mailbox Sequence Bit function */
void omap_mbox_init_seq(struct omap_mbox *mbox)
{
@@ -136,7 +212,7 @@
unsigned long flags;
if (mbox->rxq->callback == NULL) {
- sysfs_notify(&mbox->dev.kobj, NULL, "mbox");
+ sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
return;
}
@@ -204,7 +280,7 @@
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
enable_mbox_irq(mbox, IRQ_RX);
- nomem:
+nomem:
schedule_work(&mbox->rxq->work);
}
@@ -286,7 +362,7 @@
static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
static struct class omap_mbox_class = {
- .name = "omap_mbox",
+ .name = "omap-mailbox",
};
static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
@@ -333,21 +409,6 @@
return ret;
}
- mbox->dev.class = &omap_mbox_class;
- dev_set_name(&mbox->dev, "%s", mbox->name);
- dev_set_drvdata(&mbox->dev, mbox);
-
- ret = device_register(&mbox->dev);
- if (unlikely(ret))
- goto fail_device_reg;
-
- ret = device_create_file(&mbox->dev, &dev_attr_mbox);
- if (unlikely(ret)) {
- printk(KERN_ERR
- "device_create_file failed: %d\n", ret);
- goto fail_create_mbox;
- }
-
ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
mbox->name, mbox);
if (unlikely(ret)) {
@@ -377,10 +438,6 @@
fail_alloc_txq:
free_irq(mbox->irq, mbox);
fail_request_irq:
- device_remove_file(&mbox->dev, &dev_attr_mbox);
- fail_create_mbox:
- device_unregister(&mbox->dev);
- fail_device_reg:
if (unlikely(mbox->ops->shutdown))
mbox->ops->shutdown(mbox);
@@ -393,8 +450,6 @@
mbox_queue_free(mbox->rxq);
free_irq(mbox->irq, mbox);
- device_remove_file(&mbox->dev, &dev_attr_mbox);
- class_unregister(&omap_mbox_class);
if (unlikely(mbox->ops->shutdown))
mbox->ops->shutdown(mbox);
@@ -440,7 +495,7 @@
}
EXPORT_SYMBOL(omap_mbox_put);
-int omap_mbox_register(struct omap_mbox *mbox)
+int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
{
int ret = 0;
struct omap_mbox **tmp;
@@ -450,14 +505,31 @@
if (mbox->next)
return -EBUSY;
+ mbox->dev = device_create(&omap_mbox_class,
+ parent, 0, mbox, "%s", mbox->name);
+ if (IS_ERR(mbox->dev))
+ return PTR_ERR(mbox->dev);
+
+ ret = device_create_file(mbox->dev, &dev_attr_mbox);
+ if (ret)
+ goto err_sysfs;
+
write_lock(&mboxes_lock);
tmp = find_mboxes(mbox->name);
- if (*tmp)
+ if (*tmp) {
ret = -EBUSY;
- else
- *tmp = mbox;
+ write_unlock(&mboxes_lock);
+ goto err_find;
+ }
+ *tmp = mbox;
write_unlock(&mboxes_lock);
+ return 0;
+
+err_find:
+ device_remove_file(mbox->dev, &dev_attr_mbox);
+err_sysfs:
+ device_unregister(mbox->dev);
return ret;
}
EXPORT_SYMBOL(omap_mbox_register);
@@ -473,6 +545,8 @@
*tmp = mbox->next;
mbox->next = NULL;
write_unlock(&mboxes_lock);
+ device_remove_file(mbox->dev, &dev_attr_mbox);
+ device_unregister(mbox->dev);
return 0;
}
tmp = &(*tmp)->next;
@@ -501,4 +575,6 @@
subsys_initcall(omap_mbox_class_init);
module_exit(omap_mbox_class_exit);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
+MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU");
diff --git a/arch/arm/plat-omap/mailbox.h b/arch/arm/plat-omap/mailbox.h
deleted file mode 100644
index 67c6740..0000000
--- a/arch/arm/plat-omap/mailbox.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Mailbox internal functions
- *
- * Copyright (C) 2006 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_MAILBOX_H
-#define __ARCH_ARM_PLAT_MAILBOX_H
-
-/*
- * Mailbox sequence bit API
- */
-#if defined(CONFIG_ARCH_OMAP1)
-# define MBOX_USE_SEQ_BIT
-#elif defined(CONFIG_ARCH_OMAP2)
-# define MBOX_USE_SEQ_BIT
-#endif
-
-#ifdef MBOX_USE_SEQ_BIT
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message. */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
- /* any value other than 0 and 1 << 31 */
- mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
- /* add seq_snd to msg */
- *msg = (*msg & 0x7fffffff) | mbox->seq_snd;
- /* flip seq_snd */
- mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- mbox_msg_t seq = msg & (1 << 31);
- if (seq == mbox->seq_rcv)
- return -1;
- mbox->seq_rcv = seq;
- return 0;
-}
-#else
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-}
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-}
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- return 0;
-}
-#endif
-
-/* Mailbox FIFO handle functions */
-static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_read(mbox);
-}
-static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
- mbox->ops->fifo_write(mbox, msg);
-}
-static inline int mbox_fifo_empty(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_empty(mbox);
-}
-static inline int mbox_fifo_full(struct omap_mbox *mbox)
-{
- return mbox->ops->fifo_full(mbox);
-}
-
-/* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- mbox->ops->disable_irq(mbox, irq);
-}
-static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- if (mbox->ops->ack_irq)
- mbox->ops->ack_irq(mbox, irq);
-}
-static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
- return mbox->ops->is_irq(mbox, irq);
-}
-
-#endif /* __ARCH_ARM_PLAT_MAILBOX_H */
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e5842e3..28b0a82 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -214,7 +214,6 @@
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
- int i;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -223,23 +222,23 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
- mcbsp->pdata->ops->request(id);
-
- for (i = 0; i < mcbsp->num_clks; i++)
- clk_enable(mcbsp->clks[i]);
-
spin_lock(&mcbsp->lock);
if (!mcbsp->free) {
dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
mcbsp->id);
spin_unlock(&mcbsp->lock);
- return -1;
+ return -EBUSY;
}
mcbsp->free = 0;
spin_unlock(&mcbsp->lock);
+ if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
+ mcbsp->pdata->ops->request(id);
+
+ clk_enable(mcbsp->iclk);
+ clk_enable(mcbsp->fclk);
+
/*
* Make sure that transmitter, receiver and sample-rate generator are
* not running before activating IRQs.
@@ -278,7 +277,6 @@
void omap_mcbsp_free(unsigned int id)
{
struct omap_mcbsp *mcbsp;
- int i;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -289,8 +287,14 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- for (i = mcbsp->num_clks - 1; i >= 0; i--)
- clk_disable(mcbsp->clks[i]);
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+
+ if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
+ /* Free IRQs */
+ free_irq(mcbsp->rx_irq, (void *)mcbsp);
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
+ }
spin_lock(&mcbsp->lock);
if (mcbsp->free) {
@@ -302,12 +306,6 @@
mcbsp->free = 1;
spin_unlock(&mcbsp->lock);
-
- if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
- /* Free IRQs */
- free_irq(mcbsp->rx_irq, (void *)mcbsp);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- }
}
EXPORT_SYMBOL(omap_mcbsp_free);
@@ -876,7 +874,6 @@
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
- int i;
int ret = 0;
if (!pdata) {
@@ -899,7 +896,6 @@
ret = -ENOMEM;
goto exit;
}
- mcbsp_ptr[id] = mcbsp;
spin_lock_init(&mcbsp->lock);
mcbsp->id = id + 1;
@@ -921,39 +917,32 @@
mcbsp->dma_rx_sync = pdata->dma_rx_sync;
mcbsp->dma_tx_sync = pdata->dma_tx_sync;
- if (pdata->num_clks) {
- mcbsp->num_clks = pdata->num_clks;
- mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
- GFP_KERNEL);
- if (!mcbsp->clks) {
- ret = -ENOMEM;
- goto exit;
- }
- for (i = 0; i < mcbsp->num_clks; i++) {
- mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
- if (IS_ERR(mcbsp->clks[i])) {
- dev_err(&pdev->dev,
- "Invalid %s configuration for McBSP%d.\n",
- pdata->clk_names[i], mcbsp->id);
- ret = PTR_ERR(mcbsp->clks[i]);
- goto err_clk;
- }
- }
+ mcbsp->iclk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(mcbsp->iclk)) {
+ ret = PTR_ERR(mcbsp->iclk);
+ dev_err(&pdev->dev, "unable to get ick: %d\n", ret);
+ goto err_iclk;
+ }
+ mcbsp->fclk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(mcbsp->fclk)) {
+ ret = PTR_ERR(mcbsp->fclk);
+ dev_err(&pdev->dev, "unable to get fck: %d\n", ret);
+ goto err_fclk;
}
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
+ mcbsp_ptr[id] = mcbsp;
platform_set_drvdata(pdev, mcbsp);
return 0;
-err_clk:
- while (i--)
- clk_put(mcbsp->clks[i]);
- kfree(mcbsp->clks);
+err_fclk:
+ clk_put(mcbsp->iclk);
+err_iclk:
iounmap(mcbsp->io_base);
err_ioremap:
- mcbsp->free = 0;
+ kfree(mcbsp);
exit:
return ret;
}
@@ -961,7 +950,6 @@
static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
{
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
- int i;
platform_set_drvdata(pdev, NULL);
if (mcbsp) {
@@ -970,18 +958,15 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- for (i = mcbsp->num_clks - 1; i >= 0; i--) {
- clk_disable(mcbsp->clks[i]);
- clk_put(mcbsp->clks[i]);
- }
+ clk_disable(mcbsp->fclk);
+ clk_disable(mcbsp->iclk);
+ clk_put(mcbsp->fclk);
+ clk_put(mcbsp->iclk);
iounmap(mcbsp->io_base);
- if (mcbsp->num_clks) {
- kfree(mcbsp->clks);
- mcbsp->clks = NULL;
- mcbsp->num_clks = 0;
- }
+ mcbsp->fclk = NULL;
+ mcbsp->iclk = NULL;
mcbsp->free = 0;
mcbsp->dev = NULL;
}
@@ -1002,4 +987,3 @@
/* Register the McBSP driver */
return platform_driver_register(&omap_mcbsp_driver);
}
-
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index be7bcaf..fa5297d 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -148,7 +148,7 @@
omap_sram_base = OMAP1_SRAM_VA;
omap_sram_start = OMAP1_SRAM_PA;
- if (cpu_is_omap730())
+ if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index e278de6..509f2ed 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -729,30 +729,13 @@
/*-------------------------------------------------------------------------*/
-static struct omap_usb_config platform_data;
-
-static int __init
-omap_usb_init(void)
+void __init omap_usb_init(struct omap_usb_config *pdata)
{
- const struct omap_usb_config *config;
-
- config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
- if (config == NULL) {
- printk(KERN_ERR "USB: No board-specific "
- "platform config found\n");
- return -ENODEV;
- }
- platform_data = *config;
-
if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
- omap_otg_init(&platform_data);
+ omap_otg_init(pdata);
else if (cpu_is_omap15xx())
- omap_1510_usb_init(&platform_data);
- else {
+ omap_1510_usb_init(pdata);
+ else
printk(KERN_ERR "USB: No init for your chip yet\n");
- return -ENODEV;
- }
- return 0;
}
-subsys_initcall(omap_usb_init);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 0d12c21..32eb9e3 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -19,7 +19,8 @@
static DEFINE_SPINLOCK(gpio_lock);
static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
-static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
+static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
static inline void __set_direction(unsigned pin, int input)
{
@@ -53,7 +54,7 @@
{
unsigned long flags;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
@@ -83,7 +84,7 @@
unsigned long flags;
u32 u;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
@@ -161,7 +162,9 @@
unsigned long flags;
int ret;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX ||
+ !(test_bit(pin, gpio_valid_input) ||
+ test_bit(pin, gpio_valid_output))) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return -EINVAL;
}
@@ -183,7 +186,9 @@
void gpio_free(unsigned pin)
{
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
+ if (pin >= GPIO_MAX ||
+ !(test_bit(pin, gpio_valid_input) ||
+ test_bit(pin, gpio_valid_output))) {
pr_debug("%s: invalid GPIO %d\n", __func__, pin);
return;
}
@@ -208,12 +213,18 @@
__set_direction(pin, 0);
}
-void __init orion_gpio_set_valid(unsigned pin, int valid)
+void __init orion_gpio_set_valid(unsigned pin, int mode)
{
- if (valid)
- __set_bit(pin, gpio_valid);
+ if (mode == 1)
+ mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
+ if (mode & GPIO_INPUT_OK)
+ __set_bit(pin, gpio_valid_input);
else
- __clear_bit(pin, gpio_valid);
+ __clear_bit(pin, gpio_valid_input);
+ if (mode & GPIO_OUTPUT_OK)
+ __set_bit(pin, gpio_valid_output);
+ else
+ __clear_bit(pin, gpio_valid_output);
}
void orion_gpio_set_blink(unsigned pin, int blink)
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index ec743e8..33f6c6a 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -25,9 +25,13 @@
* Orion-specific GPIO API extensions.
*/
void orion_gpio_set_unused(unsigned pin);
-void orion_gpio_set_valid(unsigned pin, int valid);
void orion_gpio_set_blink(unsigned pin, int blink);
+#define GPIO_BIDI_OK (1 << 0)
+#define GPIO_INPUT_OK (1 << 1)
+#define GPIO_OUTPUT_OK (1 << 2)
+void orion_gpio_set_valid(unsigned pin, int mode);
+
/*
* GPIO interrupt handling.
*/
diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h
new file mode 100644
index 0000000..14ca886
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/mvsdio.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-orion/include/plat/mvsdio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVSDIO_H
+#define __MACH_MVSDIO_H
+
+#include <linux/mbus.h>
+
+struct mvsdio_platform_data {
+ struct mbus_dram_target_info *dram;
+ unsigned int clock;
+ int gpio_card_detect;
+ int gpio_write_protect;
+};
+
+#endif
diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig
new file mode 100644
index 0000000..b158e98
--- /dev/null
+++ b/arch/arm/plat-pxa/Kconfig
@@ -0,0 +1,3 @@
+if PLAT_PXA
+
+endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
new file mode 100644
index 0000000..4be3723
--- /dev/null
+++ b/arch/arm/plat-pxa/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for code common across different PXA processor families
+#
+
+obj-y := dma.o mfp.o
+
+obj-$(CONFIG_GENERIC_GPIO) += gpio.o
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/plat-pxa/dma.c
similarity index 93%
rename from arch/arm/mach-pxa/dma.c
rename to arch/arm/plat-pxa/dma.c
index 7de17fc..70aeee4 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-pxa/dma.c
+ * linux/arch/arm/plat-pxa/dma.c
*
* PXA DMA registration and IRQ dispatching
*
@@ -23,8 +23,6 @@
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
-
struct dma_channel {
char *name;
pxa_dma_prio prio;
@@ -36,8 +34,8 @@
static int num_dma_channels;
int pxa_request_dma (char *name, pxa_dma_prio prio,
- void (*irq_handler)(int, void *),
- void *data)
+ void (*irq_handler)(int, void *),
+ void *data)
{
unsigned long flags;
int i, found = 0;
@@ -113,7 +111,7 @@
return IRQ_HANDLED;
}
-int __init pxa_init_dma(int num_ch)
+int __init pxa_init_dma(int irq, int num_ch)
{
int i, ret;
@@ -131,7 +129,7 @@
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
}
- ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+ ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
if (ret) {
printk (KERN_CRIT "Wow! Can't register IRQ for DMA\n");
kfree(dma_channels);
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
new file mode 100644
index 0000000..af819bf
--- /dev/null
+++ b/arch/arm/plat-pxa/gpio.c
@@ -0,0 +1,337 @@
+/*
+ * linux/arch/arm/plat-pxa/gpio.c
+ *
+ * Generic PXA GPIO handling
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/bootmem.h>
+
+#include <mach/gpio.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+ char label[10];
+
+ unsigned long irq_mask;
+ unsigned long irq_edge_rise;
+ unsigned long irq_edge_fall;
+
+#ifdef CONFIG_PM
+ unsigned long saved_gplr;
+ unsigned long saved_gpdr;
+ unsigned long saved_grer;
+ unsigned long saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c) \
+ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+ return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+{
+ return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t value, mask = 1 << offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ value = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ value |= mask;
+ else
+ value &= ~mask;
+ __raw_writel(value, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = gpio_chip_base(chip);
+ uint32_t tmp, mask = 1 << offset;
+ unsigned long flags;
+
+ __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ tmp = __raw_readl(base + GPDR_OFFSET);
+ if (__gpio_is_inverted(chip->base + offset))
+ tmp &= ~mask;
+ else
+ tmp |= mask;
+ __raw_writel(tmp, base + GPDR_OFFSET);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ __raw_writel(1 << offset, gpio_chip_base(chip) +
+ (value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+ int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+ struct pxa_gpio_chip *chips;
+
+ /* this is early, we have to use bootmem allocator, and we really
+ * want this to be allocated dynamically for different 'gpio_end'
+ */
+ chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+ if (chips == NULL) {
+ pr_err("%s: failed to allocate GPIO chips\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+ struct gpio_chip *c = &chips[i].chip;
+
+ sprintf(chips[i].label, "gpio-%d", i);
+ chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+
+ c->base = gpio;
+ c->label = chips[i].label;
+
+ c->direction_input = pxa_gpio_direction_input;
+ c->direction_output = pxa_gpio_direction_output;
+ c->get = pxa_gpio_get;
+ c->set = pxa_gpio_set;
+
+ /* number of GPIOs on last bank may be less than 32 */
+ c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+ gpiochip_add(c);
+ }
+ pxa_gpio_chips = chips;
+ return 0;
+}
+
+static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+ struct pxa_gpio_chip *c;
+ int gpio = irq_to_gpio(irq);
+ unsigned long gpdr, mask = GPIO_bit(gpio);
+
+ c = gpio_to_chip(gpio);
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* Don't mess with enabled GPIOs using preconfigured edges or
+ * GPIOs set to alternate function or to output during probe
+ */
+ if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+ return 0;
+
+ if (__gpio_is_occupied(gpio))
+ return 0;
+
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+ if (__gpio_is_inverted(gpio))
+ __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
+ else
+ __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ c->irq_edge_rise |= mask;
+ else
+ c->irq_edge_rise &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ c->irq_edge_fall |= mask;
+ else
+ c->irq_edge_fall &= ~mask;
+
+ __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+ __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+
+ pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
+ ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
+ ((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+ return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct pxa_gpio_chip *c;
+ int loop, gpio, gpio_base, n;
+ unsigned long gedr;
+
+ do {
+ loop = 0;
+ for_each_gpio_chip(gpio, c) {
+ gpio_base = c->chip.base;
+
+ gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = gedr & c->irq_mask;
+ __raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+ n = find_first_bit(&gedr, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ loop = 1;
+
+ generic_handle_irq(gpio_to_irq(gpio_base + n));
+ n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+ }
+ }
+ } while (loop);
+}
+
+static void pxa_ack_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+ __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+ uint32_t grer, gfer;
+
+ c->irq_mask &= ~GPIO_bit(gpio);
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(unsigned int irq)
+{
+ int gpio = irq_to_gpio(irq);
+ struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+
+ c->irq_mask |= GPIO_bit(gpio);
+ __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
+ __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+ .name = "GPIO",
+ .ack = pxa_ack_muxed_gpio,
+ .mask = pxa_mask_muxed_gpio,
+ .unmask = pxa_unmask_muxed_gpio,
+ .set_type = pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+ struct pxa_gpio_chip *c;
+ int gpio, irq;
+
+ pxa_last_gpio = end;
+
+ /* Initialize GPIO chips */
+ pxa_init_gpio_chip(end);
+
+ /* clear all GPIO edge detects */
+ for_each_gpio_chip(gpio, c) {
+ __raw_writel(0, c->regbase + GFER_OFFSET);
+ __raw_writel(0, c->regbase + GRER_OFFSET);
+ __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ }
+
+ for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ set_irq_chip(irq, &pxa_muxed_gpio_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Install handler for GPIO>=2 edge detect interrupts */
+ set_irq_chained_handler(mux_irq, pxa_gpio_demux_handler);
+ pxa_muxed_gpio_chip.set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+ c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+ /* Clear GPIO transition detect bits */
+ __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+ }
+ return 0;
+}
+
+static int pxa_gpio_resume(struct sys_device *dev)
+{
+ struct pxa_gpio_chip *c;
+ int gpio;
+
+ for_each_gpio_chip(gpio, c) {
+ /* restore level with set/clear */
+ __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+ __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+ __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+ __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+ }
+ return 0;
+}
+#else
+#define pxa_gpio_suspend NULL
+#define pxa_gpio_resume NULL
+#endif
+
+struct sysdev_class pxa_gpio_sysclass = {
+ .name = "gpio",
+ .suspend = pxa_gpio_suspend,
+ .resume = pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_init(void)
+{
+ return sysdev_class_register(&pxa_gpio_sysclass);
+}
+
+core_initcall(pxa_gpio_init);
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
new file mode 100644
index 0000000..a7b91dc
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -0,0 +1,85 @@
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n) DMAC_REG((n) << 2)
+#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */
+#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */
+#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n) DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+ (((n) & 0x3f) << 2))
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+ volatile u32 ddadr; /* Points to the next descriptor + flags */
+ volatile u32 dsadr; /* DSADR value for the current transfer */
+ volatile u32 dtadr; /* DTADR value for the current transfer */
+ volatile u32 dcmd; /* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int irq, int num_ch);
+
+int pxa_request_dma (char *name,
+ pxa_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
new file mode 100644
index 0000000..44248cb
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -0,0 +1,62 @@
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+ return GPLR(gpio) & GPIO_bit(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+ if (value)
+ GPSR(gpio) = GPIO_bit(gpio);
+ else
+ GPCR(gpio) = GPIO_bit(gpio);
+ } else
+ __gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
new file mode 100644
index 0000000..6401946
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -0,0 +1,399 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ * Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m) ((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+ MFP_PIN_INVALID = -1,
+
+ MFP_PIN_GPIO0 = 0,
+ MFP_PIN_GPIO1,
+ MFP_PIN_GPIO2,
+ MFP_PIN_GPIO3,
+ MFP_PIN_GPIO4,
+ MFP_PIN_GPIO5,
+ MFP_PIN_GPIO6,
+ MFP_PIN_GPIO7,
+ MFP_PIN_GPIO8,
+ MFP_PIN_GPIO9,
+ MFP_PIN_GPIO10,
+ MFP_PIN_GPIO11,
+ MFP_PIN_GPIO12,
+ MFP_PIN_GPIO13,
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO16,
+ MFP_PIN_GPIO17,
+ MFP_PIN_GPIO18,
+ MFP_PIN_GPIO19,
+ MFP_PIN_GPIO20,
+ MFP_PIN_GPIO21,
+ MFP_PIN_GPIO22,
+ MFP_PIN_GPIO23,
+ MFP_PIN_GPIO24,
+ MFP_PIN_GPIO25,
+ MFP_PIN_GPIO26,
+ MFP_PIN_GPIO27,
+ MFP_PIN_GPIO28,
+ MFP_PIN_GPIO29,
+ MFP_PIN_GPIO30,
+ MFP_PIN_GPIO31,
+ MFP_PIN_GPIO32,
+ MFP_PIN_GPIO33,
+ MFP_PIN_GPIO34,
+ MFP_PIN_GPIO35,
+ MFP_PIN_GPIO36,
+ MFP_PIN_GPIO37,
+ MFP_PIN_GPIO38,
+ MFP_PIN_GPIO39,
+ MFP_PIN_GPIO40,
+ MFP_PIN_GPIO41,
+ MFP_PIN_GPIO42,
+ MFP_PIN_GPIO43,
+ MFP_PIN_GPIO44,
+ MFP_PIN_GPIO45,
+ MFP_PIN_GPIO46,
+ MFP_PIN_GPIO47,
+ MFP_PIN_GPIO48,
+ MFP_PIN_GPIO49,
+ MFP_PIN_GPIO50,
+ MFP_PIN_GPIO51,
+ MFP_PIN_GPIO52,
+ MFP_PIN_GPIO53,
+ MFP_PIN_GPIO54,
+ MFP_PIN_GPIO55,
+ MFP_PIN_GPIO56,
+ MFP_PIN_GPIO57,
+ MFP_PIN_GPIO58,
+ MFP_PIN_GPIO59,
+ MFP_PIN_GPIO60,
+ MFP_PIN_GPIO61,
+ MFP_PIN_GPIO62,
+ MFP_PIN_GPIO63,
+ MFP_PIN_GPIO64,
+ MFP_PIN_GPIO65,
+ MFP_PIN_GPIO66,
+ MFP_PIN_GPIO67,
+ MFP_PIN_GPIO68,
+ MFP_PIN_GPIO69,
+ MFP_PIN_GPIO70,
+ MFP_PIN_GPIO71,
+ MFP_PIN_GPIO72,
+ MFP_PIN_GPIO73,
+ MFP_PIN_GPIO74,
+ MFP_PIN_GPIO75,
+ MFP_PIN_GPIO76,
+ MFP_PIN_GPIO77,
+ MFP_PIN_GPIO78,
+ MFP_PIN_GPIO79,
+ MFP_PIN_GPIO80,
+ MFP_PIN_GPIO81,
+ MFP_PIN_GPIO82,
+ MFP_PIN_GPIO83,
+ MFP_PIN_GPIO84,
+ MFP_PIN_GPIO85,
+ MFP_PIN_GPIO86,
+ MFP_PIN_GPIO87,
+ MFP_PIN_GPIO88,
+ MFP_PIN_GPIO89,
+ MFP_PIN_GPIO90,
+ MFP_PIN_GPIO91,
+ MFP_PIN_GPIO92,
+ MFP_PIN_GPIO93,
+ MFP_PIN_GPIO94,
+ MFP_PIN_GPIO95,
+ MFP_PIN_GPIO96,
+ MFP_PIN_GPIO97,
+ MFP_PIN_GPIO98,
+ MFP_PIN_GPIO99,
+ MFP_PIN_GPIO100,
+ MFP_PIN_GPIO101,
+ MFP_PIN_GPIO102,
+ MFP_PIN_GPIO103,
+ MFP_PIN_GPIO104,
+ MFP_PIN_GPIO105,
+ MFP_PIN_GPIO106,
+ MFP_PIN_GPIO107,
+ MFP_PIN_GPIO108,
+ MFP_PIN_GPIO109,
+ MFP_PIN_GPIO110,
+ MFP_PIN_GPIO111,
+ MFP_PIN_GPIO112,
+ MFP_PIN_GPIO113,
+ MFP_PIN_GPIO114,
+ MFP_PIN_GPIO115,
+ MFP_PIN_GPIO116,
+ MFP_PIN_GPIO117,
+ MFP_PIN_GPIO118,
+ MFP_PIN_GPIO119,
+ MFP_PIN_GPIO120,
+ MFP_PIN_GPIO121,
+ MFP_PIN_GPIO122,
+ MFP_PIN_GPIO123,
+ MFP_PIN_GPIO124,
+ MFP_PIN_GPIO125,
+ MFP_PIN_GPIO126,
+ MFP_PIN_GPIO127,
+ MFP_PIN_GPIO0_2,
+ MFP_PIN_GPIO1_2,
+ MFP_PIN_GPIO2_2,
+ MFP_PIN_GPIO3_2,
+ MFP_PIN_GPIO4_2,
+ MFP_PIN_GPIO5_2,
+ MFP_PIN_GPIO6_2,
+ MFP_PIN_GPIO7_2,
+ MFP_PIN_GPIO8_2,
+ MFP_PIN_GPIO9_2,
+ MFP_PIN_GPIO10_2,
+ MFP_PIN_GPIO11_2,
+ MFP_PIN_GPIO12_2,
+ MFP_PIN_GPIO13_2,
+ MFP_PIN_GPIO14_2,
+ MFP_PIN_GPIO15_2,
+ MFP_PIN_GPIO16_2,
+ MFP_PIN_GPIO17_2,
+
+ MFP_PIN_ULPI_STP,
+ MFP_PIN_ULPI_NXT,
+ MFP_PIN_ULPI_DIR,
+
+ MFP_PIN_nXCVREN,
+ MFP_PIN_DF_CLE_nOE,
+ MFP_PIN_DF_nADV1_ALE,
+ MFP_PIN_DF_SCLK_E,
+ MFP_PIN_DF_SCLK_S,
+ MFP_PIN_nBE0,
+ MFP_PIN_nBE1,
+ MFP_PIN_DF_nADV2_ALE,
+ MFP_PIN_DF_INT_RnB,
+ MFP_PIN_DF_nCS0,
+ MFP_PIN_DF_nCS1,
+ MFP_PIN_nLUA,
+ MFP_PIN_nLLA,
+ MFP_PIN_DF_nWE,
+ MFP_PIN_DF_ALE_nWE,
+ MFP_PIN_DF_nRE_nOE,
+ MFP_PIN_DF_ADDR0,
+ MFP_PIN_DF_ADDR1,
+ MFP_PIN_DF_ADDR2,
+ MFP_PIN_DF_ADDR3,
+ MFP_PIN_DF_IO0,
+ MFP_PIN_DF_IO1,
+ MFP_PIN_DF_IO2,
+ MFP_PIN_DF_IO3,
+ MFP_PIN_DF_IO4,
+ MFP_PIN_DF_IO5,
+ MFP_PIN_DF_IO6,
+ MFP_PIN_DF_IO7,
+ MFP_PIN_DF_IO8,
+ MFP_PIN_DF_IO9,
+ MFP_PIN_DF_IO10,
+ MFP_PIN_DF_IO11,
+ MFP_PIN_DF_IO12,
+ MFP_PIN_DF_IO13,
+ MFP_PIN_DF_IO14,
+ MFP_PIN_DF_IO15,
+ MFP_PIN_DF_nCS0_SM_nCS2,
+ MFP_PIN_DF_nCS1_SM_nCS3,
+ MFP_PIN_SM_nCS0,
+ MFP_PIN_SM_nCS1,
+ MFP_PIN_DF_WEn,
+ MFP_PIN_DF_REn,
+ MFP_PIN_DF_CLE_SM_OEn,
+ MFP_PIN_DF_ALE_SM_WEn,
+ MFP_PIN_DF_RDY0,
+ MFP_PIN_DF_RDY1,
+
+ MFP_PIN_SM_SCLK,
+ MFP_PIN_SM_BE0,
+ MFP_PIN_SM_BE1,
+ MFP_PIN_SM_ADV,
+ MFP_PIN_SM_ADVMUX,
+ MFP_PIN_SM_RDY,
+
+ MFP_PIN_MMC1_DAT7,
+ MFP_PIN_MMC1_DAT6,
+ MFP_PIN_MMC1_DAT5,
+ MFP_PIN_MMC1_DAT4,
+ MFP_PIN_MMC1_DAT3,
+ MFP_PIN_MMC1_DAT2,
+ MFP_PIN_MMC1_DAT1,
+ MFP_PIN_MMC1_DAT0,
+ MFP_PIN_MMC1_CMD,
+ MFP_PIN_MMC1_CLK,
+ MFP_PIN_MMC1_CD,
+ MFP_PIN_MMC1_WP,
+
+ /* additional pins on PXA930 */
+ MFP_PIN_GSIM_UIO,
+ MFP_PIN_GSIM_UCLK,
+ MFP_PIN_GSIM_UDET,
+ MFP_PIN_GSIM_nURST,
+ MFP_PIN_PMIC_INT,
+ MFP_PIN_RDY,
+
+ MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * alternate function = 0,
+ * drive strength = fast 3mA (MFP_DS03X)
+ * low power mode = default
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x) ((x) & 0x3ff)
+
+#define MFP_AF0 (0x0 << 10)
+#define MFP_AF1 (0x1 << 10)
+#define MFP_AF2 (0x2 << 10)
+#define MFP_AF3 (0x3 << 10)
+#define MFP_AF4 (0x4 << 10)
+#define MFP_AF5 (0x5 << 10)
+#define MFP_AF6 (0x6 << 10)
+#define MFP_AF7 (0x7 << 10)
+#define MFP_AF_MASK (0x7 << 10)
+#define MFP_AF(x) (((x) >> 10) & 0x7)
+
+#define MFP_DS01X (0x0 << 13)
+#define MFP_DS02X (0x1 << 13)
+#define MFP_DS03X (0x2 << 13)
+#define MFP_DS04X (0x3 << 13)
+#define MFP_DS06X (0x4 << 13)
+#define MFP_DS08X (0x5 << 13)
+#define MFP_DS10X (0x6 << 13)
+#define MFP_DS13X (0x7 << 13)
+#define MFP_DS_MASK (0x7 << 13)
+#define MFP_DS(x) (((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
+#define MFP_LPM_PULL_LOW (0x3 << 16)
+#define MFP_LPM_PULL_HIGH (0x4 << 16)
+#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_INPUT (0x6 << 16)
+#define MFP_LPM_STATE_MASK (0x7 << 16)
+#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE (0x0 << 19)
+#define MFP_LPM_EDGE_RISE (0x1 << 19)
+#define MFP_LPM_EDGE_FALL (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH (0x3 << 19)
+#define MFP_LPM_EDGE_MASK (0x3 << 19)
+#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE (0x0 << 21)
+#define MFP_PULL_LOW (0x1 << 21)
+#define MFP_PULL_HIGH (0x2 << 21)
+#define MFP_PULL_BOTH (0x3 << 21)
+#define MFP_PULL_MASK (0x3 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+ MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af) \
+ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * begining at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR() to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+ unsigned int start;
+ unsigned int end;
+ unsigned long offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+ { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+ { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}() - for direct read/write access to the MFPR register
+ * mfp_config() - for configuring a group of MFPR registers
+ * mfp_config_lpm() - configuring all low power MFPR registers for suspend
+ * mfp_config_run() - configuring all run time MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
new file mode 100644
index 0000000..e716c62
--- /dev/null
+++ b/arch/arm/plat-pxa/mfp.c
@@ -0,0 +1,278 @@
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ * Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE (PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL (0x1 << 15)
+#define MFPR_PULLUP_EN (0x1 << 14)
+#define MFPR_PULLDOWN_EN (0x1 << 13)
+#define MFPR_SLEEP_SEL (0x1 << 9)
+#define MFPR_SLEEP_OE_N (0x1 << 7)
+#define MFPR_EDGE_CLEAR (0x1 << 6)
+#define MFPR_EDGE_FALL_EN (0x1 << 5)
+#define MFPR_EDGE_RISE_EN (0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x) ((x) << 8)
+#define MFPR_DRIVE(x) (((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x) (((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE (0)
+#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
+ * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
+ *
+ * Input 0 X(0) X(0) X(0) 0
+ * Drive 0 0 0 0 X(1) 0
+ * Drive 1 0 1 X(1) 0 0
+ * Pull hi (1) 1 X(1) 1 0 0
+ * Pull lo (0) 1 X(0) 0 1 0
+ * Z (float) 1 X(0) 0 0 0
+ */
+#define MFPR_LPM_INPUT (0)
+#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK (0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior, the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition pull_sel pullup_en pulldown_en
+ * MFPR_PULL_NONE 0 0 0
+ * MFPR_PULL_LOW 1 0 1
+ * MFPR_PULL_HIGH 1 1 0
+ * MFPR_PULL_BOTH 1 1 1
+ */
+#define MFPR_PULL_NONE (0)
+#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+ unsigned long config; /* -1 for not configured */
+ unsigned long mfpr_off; /* MFPRxx Register offset */
+ unsigned long mfpr_run; /* Run-Mode Register Value */
+ unsigned long mfpr_lpm; /* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+ MFPR_LPM_INPUT,
+ MFPR_LPM_DRIVE_LOW,
+ MFPR_LPM_DRIVE_HIGH,
+ MFPR_LPM_PULL_LOW,
+ MFPR_LPM_PULL_HIGH,
+ MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+ MFPR_PULL_NONE,
+ MFPR_PULL_LOW,
+ MFPR_PULL_HIGH,
+ MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+ MFPR_EDGE_NONE,
+ MFPR_EDGE_RISE,
+ MFPR_EDGE_FALL,
+ MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off) \
+ __raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val) \
+ __raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p) ((p)->config != -1)
+
+/*
+ * perform a read-back of any MFPR register to make sure the
+ * previous writings are finished
+ */
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+ if (mfp_configured(p))
+ mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+ if (mfp_configured(p)) {
+ unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+ if (mfpr_clr != p->mfpr_run)
+ mfpr_writel(p->mfpr_off, mfpr_clr);
+ if (p->mfpr_lpm != mfpr_clr)
+ mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+ }
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (i = 0; i < num; i++, mfp_cfgs++) {
+ unsigned long tmp, c = *mfp_cfgs;
+ struct mfp_pin *p;
+ int pin, af, drv, lpm, edge, pull;
+
+ pin = MFP_PIN(c);
+ BUG_ON(pin >= MFP_PIN_MAX);
+ p = &mfp_table[pin];
+
+ af = MFP_AF(c);
+ drv = MFP_DS(c);
+ lpm = MFP_LPM_STATE(c);
+ edge = MFP_LPM_EDGE(c);
+ pull = MFP_PULL(c);
+
+ /* run-mode pull settings will conflict with MFPR bits of
+ * low power mode state, calculate mfpr_run and mfpr_lpm
+ * individually if pull != MFP_PULL_NONE
+ */
+ tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+ if (likely(pull == MFP_PULL_NONE)) {
+ p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_lpm = p->mfpr_run;
+ } else {
+ p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+ p->mfpr_run = tmp | mfpr_pull[pull];
+ }
+
+ p->config = c; __mfp_config_run(p);
+ }
+
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+ unsigned long val, flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ val = mfpr_readl(mfp_table[mfp].mfpr_off);
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+ return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+ unsigned long flags;
+
+ BUG_ON(mfp >= MFP_PIN_MAX);
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+ mfpr_writel(mfp_table[mfp].mfpr_off, val);
+ mfpr_sync();
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(unsigned long mfpr_base)
+{
+ int i;
+
+ /* initialize the table with default - unconfigured */
+ for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+ mfp_table[i].config = -1;
+
+ mfpr_mmio_base = (void __iomem *)mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+ struct mfp_addr_map *p;
+ unsigned long offset, flags;
+ int i;
+
+ spin_lock_irqsave(&mfp_spin_lock, flags);
+
+ for (p = map; p->start != MFP_PIN_INVALID; p++) {
+ offset = p->offset;
+ i = p->start;
+
+ do {
+ mfp_table[i].mfpr_off = offset;
+ mfp_table[i].mfpr_run = 0;
+ mfp_table[i].mfpr_lpm = 0;
+ offset += 4; i++;
+ } while ((i <= p->end) && (p->end != -1));
+ }
+
+ spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+ struct mfp_pin *p = &mfp_table[0];
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+ __mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+ struct mfp_pin *p = &mfp_table[0];
+ int pin;
+
+ for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+ __mfp_config_run(p);
+}
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 39195f9..8d7815d 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,6 +18,11 @@
obj-y += gpio.o
obj-y += gpio-config.o
+# PM support
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
new file mode 100644
index 0000000..3779775
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -0,0 +1,174 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c_pm_init(void);
+
+#else
+
+static inline int s3c_pm_init(void)
+{
+ return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int s3c_cpu_save(unsigned long *saveblk);
+extern void s3c_cpu_resume(void);
+
+extern void s3c2410_cpu_suspend(void);
+
+extern unsigned long s3c_sleep_save_phys;
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+ void __iomem *reg;
+ unsigned long val;
+};
+
+#define SAVE_ITEM(x) \
+ { .reg = (x) }
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+ u32 ulcon;
+ u32 ucon;
+ u32 ufcon;
+ u32 umcon;
+ u32 ubrdiv;
+};
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c_irqext_wake NULL
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
+
+/* PM debug functions */
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+#else
+#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_S3C2410_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while(0)
+#define s3c_pm_check_restore() do { } while(0)
+#define s3c_pm_check_cleanup() do { } while(0)
+#define s3c_pm_check_store() do { } while(0)
+#endif
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+/**
+ * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void s3c_pm_restore_gpios(void);
+
+/**
+ * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ */
+extern void s3c_pm_save_gpios(void);
+
+/**
+ * s3c_pm_cb_flushcache - callback for assembly code
+ *
+ * Callback to issue flush_cache_all() as this call is
+ * not a directly callable object.
+ */
+extern void s3c_pm_cb_flushcache(void);
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index 6061de8..dc66a47 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -90,7 +90,10 @@
{
}
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+#define __raw_writel(d, ad) \
+ do { \
+ *((volatile unsigned int __force *)(ad)) = (d); \
+ } while (0)
/* CONFIG_S3C_BOOT_WATCHDOG
*
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
new file mode 100644
index 0000000..39f2555
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -0,0 +1,242 @@
+/* linux/arch/arm/plat-s3c/pm-check.c
+ * originally in linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+
+#include <plat/pm.h>
+
+#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size; /* size needed for the crc block */
+static u32 *crcs; /* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+ while (ptr != NULL) {
+ if (ptr->child != NULL)
+ s3c_pm_run_res(ptr->child, fn, arg);
+
+ if ((ptr->flags & IORESOURCE_MEM) &&
+ strcmp(ptr->name, "System RAM") == 0) {
+ S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+ (unsigned long)ptr->start,
+ (unsigned long)ptr->end);
+ arg = (fn)(ptr, arg);
+ }
+
+ ptr = ptr->sibling;
+ }
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+ s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+ u32 size = (u32)(res->end - res->start)+1;
+
+ size += CHECK_CHUNKSIZE-1;
+ size /= CHECK_CHUNKSIZE;
+
+ S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+ (unsigned long)res->start, (unsigned long)res->end, size);
+
+ *val += size * sizeof(u32);
+ return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+ crc_size = 0;
+
+ s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+ S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+ crcs = kmalloc(crc_size+4, GFP_KERNEL);
+ if (crcs == NULL)
+ printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+ unsigned long addr, left;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ *val = crc32_le(~0, phys_to_virt(addr), left);
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+ if (crcs != NULL)
+ s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+ if ((what+whatsz) < ptr)
+ return 0;
+
+ if (what > (ptr+size))
+ return 0;
+
+ return 1;
+}
+
+/**
+ * s3c_pm_runcheck() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @vak: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+ void *save_at = phys_to_virt(s3c_sleep_save_phys);
+ unsigned long addr;
+ unsigned long left;
+ void *stkpage;
+ void *ptr;
+ u32 calc;
+
+ stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ ptr = phys_to_virt(addr);
+
+ if (in_region(ptr, left, stkpage, 4096)) {
+ S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, crcs, crc_size)) {
+ S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, save_at, 32*4 )) {
+ S3C_PMDBG("skipping %08lx, has save block in\n", addr);
+ goto skip_check;
+ }
+
+ /* calculate and check the checksum */
+
+ calc = crc32_le(~0, ptr, left);
+ if (calc != *val) {
+ printk(KERN_ERR "Restore CRC error at "
+ "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+ S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+ addr, calc, *val);
+ }
+
+ skip_check:
+ val++;
+ }
+
+ return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+ if (crcs != NULL)
+ s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+}
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+ kfree(crcs);
+ crcs = NULL;
+}
+
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
new file mode 100644
index 0000000..061182c
--- /dev/null
+++ b/arch/arm/plat-s3c/pm.c
@@ -0,0 +1,363 @@
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004,2006,2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
+#include <asm/irq.h>
+
+#include <plat/pm.h>
+#include <plat/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* Debug code:
+ *
+ * This code supports debug output to the low level UARTs for use on
+ * resume before the console layer is available.
+*/
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+static inline void s3c_pm_debug_init(void)
+{
+ /* restart uart clocks so we can use them to output */
+ s3c_pm_debug_init_uart();
+}
+
+#else
+#define s3c_pm_debug_init() do { } while(0)
+
+#endif /* CONFIG_S3C2410_PM_DEBUG */
+
+/* Save the UART configurations if we are configured for debug. */
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
+{
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
+ save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+ save->ucon = __raw_readl(regs + S3C2410_UCON);
+ save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+ save->umcon = __raw_readl(regs + S3C2410_UMCON);
+ save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+}
+
+static void s3c_pm_save_uarts(void)
+{
+ struct pm_uart_save *save = uart_save;
+ unsigned int uart;
+
+ for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+ s3c_pm_save_uart(uart, save);
+}
+
+static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
+{
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
+ __raw_writel(save->ulcon, regs + S3C2410_ULCON);
+ __raw_writel(save->ucon, regs + S3C2410_UCON);
+ __raw_writel(save->ufcon, regs + S3C2410_UFCON);
+ __raw_writel(save->umcon, regs + S3C2410_UMCON);
+ __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+}
+
+static void s3c_pm_restore_uarts(void)
+{
+ struct pm_uart_save *save = uart_save;
+ unsigned int uart;
+
+ for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+ s3c_pm_restore_uart(uart, save);
+}
+#else
+static void s3c_pm_save_uarts(void) { }
+static void s3c_pm_restore_uarts(void) { }
+#endif
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask = 0xffffffffL;
+unsigned long s3c_irqwake_eintmask = 0xffffffffL;
+
+int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+
+ if (!(s3c_irqwake_eintallow & bit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_eintmask |= bit;
+ else
+ s3c_irqwake_eintmask &= ~bit;
+
+ return 0;
+}
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = __raw_readl(ptr->reg);
+ S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+ ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++)
+ __raw_writel(ptr->val, ptr->reg);
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask)
+{
+ int i;
+
+ which &= ~mask;
+
+ for (i = 0; i <= 31; i++) {
+ if (which & (1L<<i)) {
+ S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+ }
+ }
+}
+
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+ static unsigned long regs_save[16];
+
+ /* ensure the debug is initialised (if enabled) */
+
+ s3c_pm_debug_init();
+
+ S3C_PMDBG("%s(%d)\n", __func__, state);
+
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+ return -EINVAL;
+ }
+
+ /* check if we have anything to wake-up with... bad things seem
+ * to happen if you suspend with no wakeup (system will often
+ * require a full power-cycle)
+ */
+
+ if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+ printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+ printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+ return -EINVAL;
+ }
+
+ /* store the physical address of the register recovery block */
+
+ s3c_sleep_save_phys = virt_to_phys(regs_save);
+
+ S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
+
+ /* save all necessary core registers not covered by the drivers */
+
+ s3c_pm_save_gpios();
+ s3c_pm_save_uarts();
+ s3c_pm_save_core();
+
+ /* set the irq configuration for wake */
+
+ s3c_pm_configure_extint();
+
+ S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+ s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+ s3c_pm_arch_prepare_irqs();
+
+ /* call cpu specific preparation */
+
+ pm_cpu_prep();
+
+ /* flush cache back to ram */
+
+ flush_cache_all();
+
+ s3c_pm_check_store();
+
+ /* send the cpu to sleep... */
+
+ s3c_pm_arch_stop_clocks();
+
+ /* s3c_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state and restores it
+ * during the resume. */
+
+ s3c_cpu_save(regs_save);
+
+ /* restore the cpu state using the kernel's cpu init code. */
+
+ cpu_init();
+
+ /* restore the system state */
+
+ s3c_pm_restore_core();
+ s3c_pm_restore_uarts();
+ s3c_pm_restore_gpios();
+
+ s3c_pm_debug_init();
+
+ /* check what irq (if any) restored the system */
+
+ s3c_pm_arch_show_resume_irqs();
+
+ S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+ s3c_pm_check_restore();
+
+ /* ok, let's return from sleep */
+
+ S3C_PMDBG("S3C PM Resume (post-restore)\n");
+ return 0;
+}
+
+/* callback from assembly code */
+void s3c_pm_cb_flushcache(void)
+{
+ flush_cache_all();
+}
+
+static int s3c_pm_prepare(void)
+{
+ /* prepare check area if configured */
+
+ s3c_pm_check_prepare();
+ return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+ s3c_pm_check_cleanup();
+}
+
+static struct platform_suspend_ops s3c_pm_ops = {
+ .enter = s3c_pm_enter,
+ .prepare = s3c_pm_prepare,
+ .finish = s3c_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+ printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+ suspend_set_ops(&s3c_pm_ops);
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 1e0767b..636cb12 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -27,6 +27,7 @@
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 3d48370..1a8347c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -201,5 +201,5 @@
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
- s3c2410_pm_init();
+ s3c_pm_init();
}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 542062f..1932b7e 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -182,7 +182,7 @@
* with the caches enabled. It seems at least the S3C2440 has a problem
* resetting if there is bus activity interrupted by the reset.
*/
-static void s3c24xx_pm_restart(char mode)
+static void s3c24xx_pm_restart(char mode, const char *cmd)
{
if (mode != 's') {
unsigned long flags;
@@ -191,12 +191,12 @@
__cpuc_flush_kern_all();
__cpuc_flush_user_all();
- arch_reset(mode);
+ arch_reset(mode, cmd);
local_irq_restore(flags);
}
/* fallback, or unhandled */
- arm_machine_restart(mode);
+ arm_machine_restart(mode, cmd);
}
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 45746a9..69e1be8 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -10,6 +10,12 @@
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
#define irqdbf(x...)
#define irqdbf2(x...)
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index fef8ea8..eed8f78 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -31,6 +31,8 @@
#define S3C24XX_SZ_UART SZ_1M
#define S3C_UART_OFFSET (0x4000)
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
/* Timers */
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C2410_PA_TIMER (0x51000000)
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
new file mode 100644
index 0000000..c758821
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -0,0 +1,59 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+ /* re-start uart clocks */
+ tmp |= S3C2410_CLKCON_UART0;
+ tmp |= S3C2410_CLKCON_UART1;
+ tmp |= S3C2410_CLKCON_UART2;
+
+ __raw_writel(tmp, S3C2410_CLKCON);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+ __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+ /* ack any outstanding external interrupts before we go to sleep */
+
+ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+ __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
+}
+
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask);
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+ S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+ __raw_readl(S3C2410_SRCPND),
+ __raw_readl(S3C2410_EINTPEND));
+
+ s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+ s3c_irqwake_intmask);
+
+ s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ s3c_irqwake_eintmask);
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h
deleted file mode 100644
index cc62366..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/pm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
- return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
- void __iomem *reg;
- unsigned long val;
-};
-
-#define SAVE_ITEM(x) \
- { .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
new file mode 100644
index 0000000..b7acf1a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -0,0 +1,95 @@
+/* linux/arch/arm/plat-s3c24xx/irq-om.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C24XX - IRQ PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
+
+int s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+ if (!(s3c_irqwake_intallow & irqbit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+
+ return 0;
+}
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2410_INTMSK),
+ SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+ save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 0192ecd..9587377 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
@@ -16,38 +16,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Changelog:
- *
- * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk>
- * Fixed compile warnings
- *
- * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn>
- * Fixed s3c_extirq_type
- *
- * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- * Addition of ADC/TC demux
- *
- * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de>
- * Fix for set_irq_type() on low EINT numbers
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Tidy up KF's patch and sort out new release
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Add support for power management controls
- *
- * 04-Nov-2004 Ben Dooks
- * Fix standard IRQ wake for EINT0..4 and RTC
- *
- * 22-Feb-2005 Ben Dooks
- * Fixed edge-triggering on ADC IRQ
- *
- * 28-Jun-2005 Ben Dooks
- * Mark IRQ_LCD valid
- *
- * 25-Jul-2005 Ben Dooks
- * Split the S3C2440 IRQ code to separate file
*/
#include <linux/init.h>
@@ -55,81 +23,16 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-
#include <asm/mach/irq.h>
#include <plat/regs-irqtype.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/irq.h>
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask = 0xffffffffL;
-unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask = 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
- if (!(s3c_irqwake_intallow & irqbit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
-
- return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
- if (!(s3c_irqwake_eintallow & bit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_eintmask |= bit;
- else
- s3c_irqwake_eintmask &= ~bit;
-
- return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
static void
s3c_irq_mask(unsigned int irqno)
{
@@ -590,59 +493,6 @@
}
}
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_INTMSK),
- SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
- save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
- return 0;
-}
-
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
- __raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
- return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
-#endif
-
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 21dfa74..da0d321 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -61,7 +61,7 @@
__raw_writel(gstatus4, S3C2410_GSTATUS4);
- return s3c2410_pm_init();
+ return s3c_pm_init();
}
arch_initcall(pm_simtec_init);
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 34ef18e..062a293 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -31,14 +31,9 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
-#include <mach/hardware.h>
-
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
@@ -49,10 +44,6 @@
#include <plat/pm.h>
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
@@ -120,328 +111,14 @@
SAVE_ITEM(S3C2410_DCLKCON),
};
-#ifdef CONFIG_S3C2410_PM_DEBUG
-#define SAVE_UART(va) \
- SAVE_ITEM((va) + S3C2410_ULCON), \
- SAVE_ITEM((va) + S3C2410_UCON), \
- SAVE_ITEM((va) + S3C2410_UFCON), \
- SAVE_ITEM((va) + S3C2410_UMCON), \
- SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
- SAVE_UART(S3C24XX_VA_UART0),
- SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
- SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
- unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
- /* re-start uart clocks */
- tmp |= S3C2410_CLKCON_UART0;
- tmp |= S3C2410_CLKCON_UART1;
- tmp |= S3C2410_CLKCON_UART2;
-
- __raw_writel(tmp, S3C2410_CLKCON);
- udelay(10);
-}
-
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
-#endif
-
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size; /* size needed for the crc block */
-static u32 *crcs; /* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
- while (ptr != NULL) {
- if (ptr->child != NULL)
- s3c2410_pm_run_res(ptr->child, fn, arg);
-
- if ((ptr->flags & IORESOURCE_MEM) &&
- strcmp(ptr->name, "System RAM") == 0) {
- DBG("Found system RAM at %08lx..%08lx\n",
- ptr->start, ptr->end);
- arg = (fn)(ptr, arg);
- }
-
- ptr = ptr->sibling;
- }
-}
-
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
- s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
- u32 size = (u32)(res->end - res->start)+1;
-
- size += CHECK_CHUNKSIZE-1;
- size /= CHECK_CHUNKSIZE;
-
- DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
- *val += size * sizeof(u32);
- return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
-{
- crc_size = 0;
-
- s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
-
- DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
-
- crcs = kmalloc(crc_size+4, GFP_KERNEL);
- if (crcs == NULL)
- printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
- unsigned long addr, left;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- *val = crc32_le(~0, phys_to_virt(addr), left);
- val++;
- }
-
- return val;
-}
-
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
-{
- if (crcs != NULL)
- s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
- if ((what+whatsz) < ptr)
- return 0;
-
- if (what > (ptr+size))
- return 0;
-
- return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
- void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
- unsigned long addr;
- unsigned long left;
- void *ptr;
- u32 calc;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- ptr = phys_to_virt(addr);
-
- if (in_region(ptr, left, crcs, crc_size)) {
- DBG("skipping %08lx, has crc block in\n", addr);
- goto skip_check;
- }
-
- if (in_region(ptr, left, save_at, 32*4 )) {
- DBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
- /* calculate and check the checksum */
-
- calc = crc32_le(~0, ptr, left);
- if (calc != *val) {
- printk(KERN_ERR PFX "Restore CRC error at "
- "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
- DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
- addr, calc, *val);
- }
-
- skip_check:
- val++;
- }
-
- return val;
-}
-
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
- if (crcs != NULL) {
- s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
- kfree(crcs);
- crcs = NULL;
- }
-}
-
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store() do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
- DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
-
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
-{
- int i;
-
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if ((which) & (1L<<i)) {
- DBG("IRQ %d asserted at resume\n", start+i);
- }
- }
-}
-
-/* s3c2410_pm_check_resume_pin
+/* s3c_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
* make any necessary adjustments if it is not
*/
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
{
unsigned long irqstate;
unsigned long pinstate;
@@ -456,21 +133,21 @@
if (!irqstate) {
if (pinstate == S3C2410_GPIO_IRQ)
- DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+ S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
} else {
if (pinstate == S3C2410_GPIO_IRQ) {
- DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+ S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
}
}
}
-/* s3c2410_pm_configure_extint
+/* s3c_pm_configure_extint
*
* configure all external interrupt pins
*/
-static void s3c2410_pm_configure_extint(void)
+void s3c_pm_configure_extint(void)
{
int pin;
@@ -480,11 +157,11 @@
*/
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+ s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
}
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
}
}
@@ -494,12 +171,12 @@
#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
-/* s3c2410_pm_save_gpios()
+/* s3c_pm_save_gpios()
*
* Save the state of the GPIOs
*/
-static void s3c2410_pm_save_gpios(void)
+void s3c_pm_save_gpios(void)
{
struct gpio_sleep *gps = gpio_save;
unsigned int gpio;
@@ -538,7 +215,10 @@
return con == 1;
}
-/* s3c2410_pm_restore_gpio()
+/**
+ * s3c2410_pm_restore_gpio() - restore the given GPIO bank
+ * @index: The number of the GPIO bank being resumed.
+ * @gps: The sleep confgiuration for the bank.
*
* Restore one of the GPIO banks that was saved during suspend. This is
* not as simple as once thought, due to the possibility of glitches
@@ -646,8 +326,8 @@
__raw_writel(gps->gpup, base + OFFS_UP);
}
- DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
- index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+ S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+ index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}
@@ -656,7 +336,7 @@
* Restore the state of the GPIOs
*/
-static void s3c2410_pm_restore_gpios(void)
+void s3c_pm_restore_gpios(void)
{
struct gpio_sleep *gps = gpio_save;
int gpio;
@@ -666,150 +346,15 @@
}
}
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
+void s3c_pm_restore_core(void)
{
- unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c2410_pm_debug_init();
-
- DBG("s3c2410_pm_enter(%d)\n", state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
- printk(KERN_ERR PFX "Aborting sleep\n");
- return -EINVAL;
- }
-
- /* prepare check area if configured */
-
- s3c2410_pm_check_prepare();
-
- /* store the physical address of the register recovery block */
-
- s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
- DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c2410_pm_save_gpios();
- s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
- s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
- /* set the irq configuration for wake */
-
- s3c2410_pm_configure_extint();
-
- DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
- /* call cpu specific preparation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c2410_pm_check_store();
-
- /* send the cpu to sleep... */
-
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-
- /* s3c2410_cpu_save will also act as our return point from when
- * we resume as it saves its own register state, so use the return
- * code to differentiate return from save and return from sleep */
-
- if (s3c2410_cpu_save(regs_save) == 0) {
- flush_cache_all();
- pm_cpu_sleep();
- }
-
- /* restore the cpu state */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
- s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
- s3c2410_pm_restore_gpios();
-
- s3c2410_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-
- DBG("post sleep, preparing to return\n");
-
- s3c2410_pm_check_restore();
-
- /* ok, let's return from sleep */
-
- DBG("S3C2410 PM Resume (post-restore)\n");
- return 0;
+ s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
-static struct platform_suspend_ops s3c2410_pm_ops = {
- .enter = s3c2410_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c2410_pm_init(void)
+void s3c_pm_save_core(void)
{
- printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
- suspend_set_ops(&s3c2410_pm_ops);
- return 0;
+ s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+ s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
}
+
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index c1de6bb..1364317 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -145,13 +145,13 @@
static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
{
- s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
return 0;
}
static int s3c244x_resume(struct sys_device *dev)
{
- s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+ s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index 76594b2..e73e3b6e 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -41,25 +41,13 @@
.text
- /* s3c2410_cpu_save
- *
- * save enough of the CPU state to allow us to re-start
- * pm.c code. as we store items like the sp/lr, we will
- * end up returning from this function when the cpu resumes
- * so the return value is set to mark this.
- *
- * This arangement means we avoid having to flush the cache
- * from this code.
+ /* s3c_cpu_save
*
* entry:
- * r0 = pointer to save block
- *
- * exit:
- * r0 = 0 => we stored everything
- * 1 => resumed from sleep
+ * r0 = save address (virtual addr of s3c_sleep_save_phys)
*/
-ENTRY(s3c2410_cpu_save)
+ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
@@ store co-processor registers
@@ -71,20 +59,25 @@
stmia r0, { r4 - r13 }
- mov r0, #0
- ldmfd sp, { r4 - r12, pc }
+ @@ write our state back to RAM
+ bl s3c_pm_cb_flushcache
+ @@ jump to final code to send system to sleep
+ ldr r0, =pm_cpu_sleep
+ @@ldr pc, [ r0 ]
+ ldr r0, [ r0 ]
+ mov pc, r0
+
@@ return to the caller, after having the MMU
@@ turned on, this restores the last bits from the
@@ stack
resume_with_mmu:
- mov r0, #1
ldmfd sp!, { r4 - r12, pc }
.ltorg
@@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c2410_sleep_save_phys needs to be
+ @@ happen to be code... the s3c_sleep_save_phys needs to be
@@ accessed by the resume code before it can restore the MMU.
@@ This means that the variable has to be close enough for the
@@ code to read it... since the .text segment needs to be RO,
@@ -92,19 +85,19 @@
.data
- .global s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
+ .global s3c_sleep_save_phys
+s3c_sleep_save_phys:
.word 0
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
- * s3c2410_cpu_resume entry.
+ * s3c_cpu_resume entry.
*/
.word 0x2bedf00d
- /* s3c2410_cpu_resume
+ /* s3c_cpu_resume
*
* resume code entry for bootloader to call
*
@@ -113,7 +106,7 @@
* must not write to the code segment (code is read-only)
*/
-ENTRY(s3c2410_cpu_resume)
+ENTRY(s3c_cpu_resume)
mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
msr cpsr_c, r0
@@ -145,7 +138,7 @@
mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
- ldr r0, s3c2410_sleep_save_phys @ address of restore block
+ ldr r0, s3c_sleep_save_phys @ address of restore block
ldmia r0, { r4 - r13 }
mcr p15, 0, r4, c13, c0, 0 @ PID
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index fd23c0e..945e0d2 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Mon Mar 23 20:09:01 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -1811,7 +1811,7 @@
jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
gprisc3 MACH_GPRISC3 GPRISC3 1823
-stamp9260 MACH_STAMP9260 STAMP9260 1824
+stamp9g20 MACH_STAMP9G20 STAMP9G20 1824
smdk6430 MACH_SMDK6430 SMDK6430 1825
smdkc100 MACH_SMDKC100 SMDKC100 1826
tavorevb MACH_TAVOREVB TAVOREVB 1827
@@ -1993,4 +1993,142 @@
benzina MACH_BENZINA BENZINA 2003
blaze MACH_BLAZE BLAZE 2004
linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005
-htcvenus MACH_HTCVENUS HTCVENUS 2006
+htckovsky MACH_HTCVENUS HTCVENUS 2006
+sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007
+hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008
+sapphira MACH_SAPPHIRA SAPPHIRA 2009
+dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010
+armbox MACH_ARMBOX ARMBOX 2011
+harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012
+ribaldo MACH_RIBALDO RIBALDO 2013
+agora MACH_AGORA AGORA 2014
+omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015
+a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016
+usg2410 MACH_USG2410 USG2410 2017
+pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018
+mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019
+topas910 MACH_TOPAS910 TOPAS910 2020
+hyena MACH_HYENA HYENA 2021
+pospax MACH_POSPAX POSPAX 2022
+hdl_gx MACH_HDL_GX HDL_GX 2023
+ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024
+ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025
+crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026
+egauge2 MACH_EGAUGE2 EGAUGE2 2027
+didj MACH_DIDJ DIDJ 2028
+m_s3c2443 MACH_MEISTER MEISTER 2029
+htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030
+cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031
+smdk6440 MACH_SMDK6440 SMDK6440 2032
+omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033
+ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034
+pvg610_100 MACH_PVG610 PVG610 2035
+hprw6815 MACH_HPRW6815 HPRW6815 2036
+omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037
+nas4220b MACH_NAS4220B NAS4220B 2038
+htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039
+htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040
+scaler MACH_SCALER SCALER 2041
+zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042
+aspenite MACH_ASPENITE ASPENITE 2043
+teton MACH_TETON TETON 2044
+ttc_dkb MACH_TTC_DKB TTC_DKB 2045
+bishop2 MACH_BISHOP2 BISHOP2 2046
+ippv5 MACH_IPPV5 IPPV5 2047
+farm926 MACH_FARM926 FARM926 2048
+mmccpu MACH_MMCCPU MMCCPU 2049
+sgmsfl MACH_SGMSFL SGMSFL 2050
+tt8000 MACH_TT8000 TT8000 2051
+zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052
+mptc MACH_MPTC MPTC 2053
+h6051 MACH_H6051 H6051 2054
+pvg610_101 MACH_PVG610_101 PVG610_101 2055
+stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056
+pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057
+tny_a9260 MACH_TNY_A9260 TNY_A9260 2058
+tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059
+aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060
+dx900 MACH_DX900 DX900 2061
+cpodc2 MACH_CPODC2 CPODC2 2062
+tilt_8925 MACH_TILT_8925 TILT_8925 2063
+davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064
+swordfish MACH_SWORDFISH SWORDFISH 2065
+corvus MACH_CORVUS CORVUS 2066
+taurus MACH_TAURUS TAURUS 2067
+axm MACH_AXM AXM 2068
+axc MACH_AXC AXC 2069
+baby MACH_BABY BABY 2070
+mp200 MACH_MP200 MP200 2071
+pcm043 MACH_PCM043 PCM043 2072
+hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073
+kbk9g20 MACH_KBK9G20 KBK9G20 2074
+adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075
+avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076
+suc82x MACH_SUC SUC 2077
+at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078
+mendoza MACH_MENDOZA MENDOZA 2079
+kira MACH_KIRA KIRA 2080
+mx1hbm MACH_MX1HBM MX1HBM 2081
+quatro43xx MACH_QUATRO43XX QUATRO43XX 2082
+quatro4230 MACH_QUATRO4230 QUATRO4230 2083
+nsb400 MACH_NSB400 NSB400 2084
+drp255 MACH_DRP255 DRP255 2085
+thoth MACH_THOTH THOTH 2086
+firestone MACH_FIRESTONE FIRESTONE 2087
+asusp750 MACH_ASUSP750 ASUSP750 2088
+ctera_dl MACH_CTERA_DL CTERA_DL 2089
+socr MACH_SOCR SOCR 2090
+htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091
+heroc MACH_HEROC HEROC 2092
+zeno6800 MACH_ZENO6800 ZENO6800 2093
+sc2mcs MACH_SC2MCS SC2MCS 2094
+gene100 MACH_GENE100 GENE100 2095
+as353x MACH_AS353X AS353X 2096
+sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097
+at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098
+mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099
+cc9200 MACH_CC9200 CC9200 2100
+sm9200 MACH_SM9200 SM9200 2101
+tp9200 MACH_TP9200 TP9200 2102
+snapperdv MACH_SNAPPERDV SNAPPERDV 2103
+avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104
+avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105
+omap3axon MACH_OMAP3AXON OMAP3AXON 2106
+ma8xx MACH_MA8XX MA8XX 2107
+mp201ek MACH_MP201EK MP201EK 2108
+davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109
+mpa1600 MACH_MPA1600 MPA1600 2110
+pelco_troy MACH_PELCO_TROY PELCO_TROY 2111
+nsb667 MACH_NSB667 NSB667 2112
+rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113
+twocom MACH_TWOCOM TWOCOM 2114
+ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115
+hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116
+afeusb MACH_AFEUSB AFEUSB 2117
+t830 MACH_T830 T830 2118
+spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119
+om_3d7k MACH_OM_3D7K OM_3D7K 2120
+picocom2 MACH_PICOCOM2 PICOCOM2 2121
+uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122
+uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123
+cherry MACH_CHERRY CHERRY 2124
+mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125
+s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126
+tx37 MACH_TX37 TX37 2127
+sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128
+benzglb MACH_BENZGLB BENZGLB 2129
+benztd MACH_BENZTD BENZTD 2130
+cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131
+solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132
+mx27wallace MACH_MX27WALLACE MX27WALLACE 2133
+fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134
+rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135
+smallogger MACH_SMALLOGGER SMALLOGGER 2136
+ccw9p9215 MACH_CCW9P9215 CCW9P9215 2137
+dm355_leopard MACH_DM355_LEOPARD DM355_LEOPARD 2138
+ts219 MACH_TS219 TS219 2139
+tny_a9263 MACH_TNY_A9263 TNY_A9263 2140
+apollo MACH_APOLLO APOLLO 2141
+at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
+spc300 MACH_SPC300 SPC300 2143
+eko MACH_EKO EKO 2144
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 8de86e4..c8c98dd 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -377,6 +377,4 @@
u32 flags;
};
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
extern void vfp_save_state(void *location, u32 fpexc);
-#endif
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index c92a08b..a5a4e57 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -172,7 +172,6 @@
@ retry the faulted instruction
ENDPROC(vfp_support_entry)
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
ENTRY(vfp_save_state)
@ Save the current VFP state
@ r0 - save location
@@ -190,7 +189,6 @@
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
ENDPROC(vfp_save_state)
-#endif
last_VFP_context_address:
.word last_VFP_context
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 9f476a1..75457b3 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -377,6 +377,55 @@
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */
+/*
+ * Synchronise the hardware VFP state of a thread other than current with the
+ * saved one. This function is used by the ptrace mechanism.
+ */
+#ifdef CONFIG_SMP
+void vfp_sync_state(struct thread_info *thread)
+{
+ /*
+ * On SMP systems, the VFP state is automatically saved at every
+ * context switch. We mark the thread VFP state as belonging to a
+ * non-existent CPU so that the saved one will be reloaded when
+ * needed.
+ */
+ thread->vfpstate.hard.cpu = NR_CPUS;
+}
+#else
+void vfp_sync_state(struct thread_info *thread)
+{
+ unsigned int cpu = get_cpu();
+ u32 fpexc = fmrx(FPEXC);
+
+ /*
+ * If VFP is enabled, the previous state was already saved and
+ * last_VFP_context updated.
+ */
+ if (fpexc & FPEXC_EN)
+ goto out;
+
+ if (!last_VFP_context[cpu])
+ goto out;
+
+ /*
+ * Save the last VFP state on this CPU.
+ */
+ fmxr(FPEXC, fpexc | FPEXC_EN);
+ vfp_save_state(last_VFP_context[cpu], fpexc);
+ fmxr(FPEXC, fpexc);
+
+ /*
+ * Set the context to NULL to force a reload the next time the thread
+ * uses the VFP.
+ */
+ last_VFP_context[cpu] = NULL;
+
+out:
+ put_cpu();
+}
+#endif
+
#include <linux/smp.h>
/*
@@ -427,6 +476,18 @@
* in place; report VFP support to userspace.
*/
elf_hwcap |= HWCAP_VFP;
+#ifdef CONFIG_VFPv3
+ if (VFP_arch >= 3) {
+ elf_hwcap |= HWCAP_VFPv3;
+
+ /*
+ * Check for VFPv3 D16. CPUs in this configuration
+ * only have 16 x 64bit registers.
+ */
+ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
+ elf_hwcap |= HWCAP_VFPv3D16;
+ }
+#endif
#ifdef CONFIG_NEON
/*
* Check for the presence of the Advanced SIMD
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8f1f97d..0c1f86e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1129,6 +1129,7 @@
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
+ depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
@@ -1168,6 +1169,12 @@
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+ (all processors, except ADSP-BF549). This option sets
+ the general-purpose wake-up enable (GPWE) control bit to enable
+ wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+ On ADSP-BF549 this option enables the the same functionality on the
+ /MRXON pin also PH7.
+
endmenu
menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 5f981d9..79e7e63 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -21,12 +21,6 @@
config HAVE_ARCH_KGDB
def_bool y
-config KGDB_TESTCASE
- tristate "KGDB: for test case in expect"
- default n
- help
- This is a kgdb test case for automated testing.
-
config DEBUG_VERBOSE
bool "Verbose fault messages"
default y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 4fdb9e0..281f4b6 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan 9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -133,10 +133,15 @@
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=0
CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -607,6 +626,7 @@
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
@@ -788,8 +824,10 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -861,10 +899,18 @@
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
@@ -1062,12 +1108,20 @@
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
# CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 833128b..a50050f 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -327,8 +327,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 334c94b..0a2a00d 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -290,8 +290,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9d73343..eb02758 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -290,8 +290,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 4fb4108..9e62b9f 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -298,8 +298,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
@@ -568,15 +568,7 @@
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index cb32f56..dd6ad6b 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -306,8 +306,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0f869761..6bc2fb1 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -361,8 +361,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
@@ -680,7 +680,7 @@
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 042c7ad..69714fb 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -329,8 +329,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_BFIN_L2_CACHEABLE is not set
# CONFIG_MPU is not set
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 3a20e28..017c6ea 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -288,8 +288,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 865ed85..d880ef7 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -332,8 +332,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efe9741..f410430 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -336,8 +336,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
# CONFIG_MPU is not set
@@ -595,7 +595,7 @@
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index eae83b5..7db9387 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -612,7 +612,7 @@
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index fa580af..a46529c 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -282,8 +282,8 @@
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
# CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
CONFIG_L1_MAX_PIECE=16
#
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 606ecfd..09c3141 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,3 +1,4 @@
include include/asm-generic/Kbuild.asm
+unifdef-y += bfin_sport.h
unifdef-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index fe88a2c..65a651d 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,30 +1,9 @@
/*
- * File: include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author: Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
*
- * Created: Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __BFIN_SPORT_H__
@@ -42,11 +21,10 @@
#define NORM_FORMAT 0x0
#define ALAW_FORMAT 0x2
#define ULAW_FORMAT 0x3
-struct sport_register;
/* Function driver which use sport must initialize the structure */
struct sport_config {
- /*TDM (multichannels), I2S or other mode */
+ /* TDM (multichannels), I2S or other mode */
unsigned int mode:3;
/* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@
int serial_clk;
int fsync_clk;
- unsigned int data_format:2; /*Normal, u-law or a-law */
+ unsigned int data_format:2; /* Normal, u-law or a-law */
int word_len; /* How length of the word in bits, 3-32 bits */
int dma_enabled;
};
+/* Userspace interface */
+#define SPORT_IOC_MAGIC 'P'
+#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
struct sport_register {
unsigned short tcr1;
unsigned short reserved0;
@@ -117,9 +101,6 @@
unsigned long mrcs3;
};
-#define SPORT_IOC_MAGIC 'P'
-#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config)
-
struct sport_dev {
struct cdev cdev; /* Char device structure */
@@ -149,6 +130,8 @@
struct sport_config config;
};
+#endif
+
#define SPORT_TCR1 0
#define SPORT_TCR2 1
#define SPORT_TCLKDIV 2
@@ -169,4 +152,4 @@
#define SPORT_MRCS2 22
#define SPORT_MRCS3 23
-#endif /*__BFIN_SPORT_H__*/
+#endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 76f53d8..343b563 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
#include <asm/atomic.h>
#include <asm/traps.h>
-#define IPIPE_ARCH_STRING "1.8-00"
+#define IPIPE_ARCH_STRING "1.9-00"
#define IPIPE_MAJOR_NUMBER 1
-#define IPIPE_MINOR_NUMBER 8
+#define IPIPE_MINOR_NUMBER 9
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
@@ -83,9 +83,9 @@
"%2 = CYCLES2\n" \
"CC = %2 == %0\n" \
"if ! CC jump 1b\n" \
- : "=r" (((unsigned long *)&t)[1]), \
- "=r" (((unsigned long *)&t)[0]), \
- "=r" (__cy2) \
+ : "=d,a" (((unsigned long *)&t)[1]), \
+ "=d,a" (((unsigned long *)&t)[0]), \
+ "=d,a" (__cy2) \
: /*no input*/ : "CC"); \
t; \
})
@@ -118,35 +118,40 @@
#define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq))
-#define __ipipe_lock_root() \
- set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+ return 1;
+}
-#define __ipipe_unlock_root() \
- clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+ set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+ clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
-#define __ipipe_sync_pipeline(syncmask) \
- do { \
- struct ipipe_domain *ipd = ipipe_current_domain; \
- if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
- __ipipe_sync_stage(syncmask); \
- } while (0)
+#define __ipipe_sync_pipeline ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
int __ipipe_get_irq_priority(unsigned irq);
-int __ipipe_get_irqthread_priority(unsigned irq);
-
void __ipipe_stall_root_raw(void);
void __ipipe_unstall_root_raw(void);
void __ipipe_serial_debug(const char *fmt, ...);
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@
#define __ipipe_run_irqtail() /* Must be a macro */ \
do { \
- asmlinkage void __ipipe_call_irqtail(void); \
unsigned long __pending; \
- CSYNC(); \
+ CSYNC(); \
__pending = bfin_read_IPEND(); \
if (__pending & 0x8000) { \
__pending &= ~0x8010; \
if (__pending && (__pending & (__pending - 1)) == 0) \
- __ipipe_call_irqtail(); \
+ __ipipe_call_irqtail(__ipipe_irq_tail_hook); \
} \
} while (0)
#define __ipipe_run_isr(ipd, irq) \
do { \
if (ipd == ipipe_root_domain) { \
- /* \
- * Note: the I-pipe implements a threaded interrupt model on \
- * this arch for Linux external IRQs. The interrupt handler we \
- * call here only wakes up the associated IRQ thread. \
- */ \
- if (ipipe_virtual_irq_p(irq)) { \
- /* No irqtail here; virtual interrupts have no effect \
- on IPEND so there is no need for processing \
- deferral. */ \
- local_irq_enable_nohead(ipd); \
+ local_irq_enable_hw(); \
+ if (ipipe_virtual_irq_p(irq)) \
ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
- local_irq_disable_nohead(ipd); \
- } else \
- /* \
- * No need to run the irqtail here either; \
- * we can't be preempted by hw IRQs, so \
- * non-Linux IRQs cannot stack over the short \
- * thread wakeup code. Which in turn means \
- * that no irqtail condition could be pending \
- * for domains above Linux in the pipeline. \
- */ \
+ else \
ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+ local_irq_disable_hw(); \
} else { \
__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
local_irq_enable_nohead(ipd); \
@@ -217,42 +205,24 @@
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
-#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR IRQ_CORETMR
+#define IRQ_PRIOTMR IRQ_CORETMR
+#else
#define IRQ_SYSTMR IRQ_TIMER0
#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
+#endif
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq) CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
- (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
- (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
- -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
- (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
- (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
- -1)
+#ifdef CONFIG_BF561
#define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val)
#define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS()
#elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
- (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
- (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
- (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
- -1)
#define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val)
#define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val)
#define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val)
#define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
#endif
#define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@
#endif /* !CONFIG_IPIPE */
+#define ipipe_update_tick_evtdev(evtdev) do { } while (0)
+
#endif /* !__ASM_BLACKFIN_IPIPE_H */
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index cb1025a..3e8acbd 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -1,5 +1,5 @@
/* -*- linux-c -*-
- * include/asm-blackfin/_baseipipe.h
+ * include/asm-blackfin/ipipe_base.h
*
* Copyright (C) 2007 Philippe Gerum.
*
@@ -27,8 +27,9 @@
#define IPIPE_NR_XIRQS NR_IRQS
#define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG 15
+#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK)
/* Blackfin traps -- i.e. exception vector numbers */
#define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */
@@ -48,11 +49,6 @@
#ifndef __ASSEMBLY__
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
static inline void __ipipe_stall_root(void)
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 3d97790..7645e85 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -61,20 +61,38 @@
#define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags))
#define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x)
-#define local_save_flags(x) \
- do { \
- (x) = __ipipe_test_root() ? \
+#define local_save_flags(x) \
+ do { \
+ (x) = __ipipe_test_root() ? \
__all_masked_irq_flags : bfin_irq_flags; \
+ barrier(); \
} while (0)
-#define local_irq_save(x) \
- do { \
- (x) = __ipipe_test_and_stall_root(); \
+#define local_irq_save(x) \
+ do { \
+ (x) = __ipipe_test_and_stall_root() ? \
+ __all_masked_irq_flags : bfin_irq_flags; \
+ barrier(); \
} while (0)
-#define local_irq_restore(x) __ipipe_restore_root(x)
-#define local_irq_disable() __ipipe_stall_root()
-#define local_irq_enable() __ipipe_unstall_root()
+static inline void local_irq_restore(unsigned long x)
+{
+ barrier();
+ __ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable() \
+ do { \
+ __ipipe_stall_root(); \
+ barrier(); \
+ } while (0)
+
+static inline void local_irq_enable(void)
+{
+ barrier();
+ __ipipe_unstall_root();
+}
+
#define irqs_disabled() __ipipe_test_root()
#define local_save_flags_hw(x) \
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index e721ce5..2920087 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -122,6 +122,7 @@
#define TIF_MEMDIE 4
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
+#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC)
#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 4a92a86..fd4d432 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,13 +15,15 @@
obj-y += time.o
endif
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 0e28f75..d6c0677 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -53,9 +53,13 @@
i_d = i_i = 0;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
/* Set up the zero page. */
d_tbl[i_d].addr = 0;
d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+ i_tbl[i_i].addr = 0;
+ i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
/* Cover kernel memory with 4M pages. */
addr = 0;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 339be5a..a5de8d4 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -35,14 +35,8 @@
#include <asm/atomic.h>
#include <asm/io.h>
-static int create_irq_threads;
-
DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
static void __ipipe_no_irqtail(void);
@@ -93,6 +87,7 @@
*/
void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
{
+ struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
struct ipipe_domain *this_domain, *next_domain;
struct list_head *head, *pos;
int m_ack, s = -1;
@@ -104,7 +99,6 @@
* interrupt.
*/
m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
this_domain = ipipe_current_domain;
if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@@ -114,49 +108,28 @@
next_domain = list_entry(head, struct ipipe_domain, p_link);
if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
- next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
- if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
- s = __test_and_set_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
+ next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+ s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
__ipipe_dispatch_wired(next_domain, irq);
- goto finalize;
- return;
+ goto out;
}
}
/* Ack the interrupt. */
pos = head;
-
while (pos != &__ipipe_pipeline) {
next_domain = list_entry(pos, struct ipipe_domain, p_link);
- /*
- * For each domain handling the incoming IRQ, mark it
- * as pending in its log.
- */
if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
- /*
- * Domains that handle this IRQ are polled for
- * acknowledging it by decreasing priority
- * order. The interrupt must be made pending
- * _first_ in the domain's status flags before
- * the PIC is unlocked.
- */
__ipipe_set_irq_pending(next_domain, irq);
-
if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
- next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+ next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
m_ack = 1;
}
}
-
- /*
- * If the domain does not want the IRQ to be passed
- * down the interrupt pipe, exit the loop now.
- */
if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
break;
-
pos = next_domain->p_link.next;
}
@@ -166,18 +139,24 @@
* immediately to the current domain if the interrupt has been
* marked as 'sticky'. This search does not go beyond the
* current domain in the pipeline. We also enforce the
- * additional root stage lock (blackfin-specific). */
+ * additional root stage lock (blackfin-specific).
+ */
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+ s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
- if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
- s = __test_and_set_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
-finalize:
+ /*
+ * If the interrupt preempted the head domain, then do not
+ * even try to walk the pipeline, unless an interrupt is
+ * pending for it.
+ */
+ if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+ ipipe_head_cpudom_var(irqpend_himask) == 0)
+ goto out;
__ipipe_walk_pipeline(head);
-
+out:
if (!s)
- __clear_bit(IPIPE_STALL_FLAG,
- &ipipe_root_cpudom_var(status));
+ __clear_bit(IPIPE_STALL_FLAG, &p->status);
}
int __ipipe_check_root(void)
@@ -187,7 +166,7 @@
void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
desc->depth = 0;
@@ -199,7 +178,7 @@
void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
{
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
int prio = desc->ic_prio;
if (ipd != &ipipe_root &&
@@ -236,15 +215,18 @@
{
unsigned long flags;
- /* We need to run the IRQ tail hook whenever we don't
+ /*
+ * We need to run the IRQ tail hook whenever we don't
* propagate a syscall to higher domains, because we know that
* important operations might be pending there (e.g. Xenomai
- * deferred rescheduling). */
+ * deferred rescheduling).
+ */
- if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+ if (regs->orig_p0 < NR_syscalls) {
void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
hook();
- return 0;
+ if ((current->flags & PF_EVNOTIFY) == 0)
+ return 0;
}
/*
@@ -312,112 +294,46 @@
{
unsigned long flags;
+#ifdef CONFIG_IPIPE_DEBUG
if (irq >= IPIPE_NR_IRQS ||
(ipipe_virtual_irq_p(irq)
&& !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
return -EINVAL;
+#endif
local_irq_save_hw(flags);
-
__ipipe_handle_irq(irq, NULL);
-
local_irq_restore_hw(flags);
return 1;
}
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
{
- struct irq_desc *desc = __desc;
- unsigned irq = desc - irq_desc;
- int thrprio = desc->thr_prio;
- int thrmask = 1 << thrprio;
- int cpu = smp_processor_id();
- cpumask_t cpumask;
+ unsigned long flags;
- sigfillset(¤t->blocked);
- current->flags |= PF_NOFREEZE;
- cpumask = cpumask_of_cpu(cpu);
- set_cpus_allowed(current, cpumask);
- ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
+ BUG_ON(irqs_disabled());
- while (!kthread_should_stop()) {
- local_irq_disable();
- if (!(desc->status & IRQ_SCHEDULED)) {
- set_current_state(TASK_INTERRUPTIBLE);
-resched:
- local_irq_enable();
- schedule();
- local_irq_disable();
- }
- __set_current_state(TASK_RUNNING);
- /*
- * If higher priority interrupt servers are ready to
- * run, reschedule immediately. We need this for the
- * GPIO demux IRQ handler to unmask the interrupt line
- * _last_, after all GPIO IRQs have run.
- */
- if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
- goto resched;
- if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
- per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
- desc->status &= ~IRQ_SCHEDULED;
- desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
- local_irq_enable();
- }
- __set_current_state(TASK_RUNNING);
- return 0;
+ local_irq_save_hw(flags);
+
+ clear_thread_flag(TIF_IRQ_SYNC);
+
+ if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+ __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
+
+ local_irq_restore_hw(flags);
}
-static void kick_irqd(unsigned irq, void *cookie)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
{
- struct irq_desc *desc = irq_desc + irq;
- int thrprio = desc->thr_prio;
- int thrmask = 1 << thrprio;
- int cpu = smp_processor_id();
+ struct ipipe_domain *ipd = ipipe_current_domain;
- if (!(desc->status & IRQ_SCHEDULED)) {
- desc->status |= IRQ_SCHEDULED;
- per_cpu(pending_irqthread_mask, cpu) |= thrmask;
- ++per_cpu(pending_irq_count[thrprio], cpu);
- wake_up_process(desc->thread);
- }
-}
-
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
- if (desc->thread || !create_irq_threads)
- return 0;
-
- desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
- if (desc->thread == NULL) {
- printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
- return -ENOMEM;
+ if (ipd == ipipe_root_domain) {
+ if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+ return;
}
- wake_up_process(desc->thread);
-
- desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
- ipipe_root_domain->irqs[irq].handler = &kick_irqd;
-
- return 0;
-}
-
-void __init ipipe_init_irq_threads(void)
-{
- unsigned irq;
- struct irq_desc *desc;
-
- create_irq_threads = 1;
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- desc = irq_desc + irq;
- if (desc->action != NULL ||
- (desc->status & IRQ_NOREQUEST) != 0)
- ipipe_start_irq_thread(irq, desc);
- }
+ __ipipe_sync_stage(syncmask);
}
EXPORT_SYMBOL(show_stack);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 75724ee..7fd1265 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -144,11 +144,15 @@
#endif
generic_handle_irq(irq);
-#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */
- /* If we're the only interrupt running (ignoring IRQ15 which is for
- syscalls), lower our priority to IRQ14 so that softirqs run at
- that level. If there's another, lower-level interrupt, irq_exit
- will defer softirqs to that. */
+#ifndef CONFIG_IPIPE
+ /*
+ * If we're the only interrupt running (ignoring IRQ15 which
+ * is for syscalls), lower our priority to IRQ14 so that
+ * softirqs run at that level. If there's another,
+ * lower-level interrupt, irq_exit will defer softirqs to
+ * that. If the interrupt pipeline is enabled, we are already
+ * running at IRQ14 priority, so we don't need this code.
+ */
CSYNC();
pending = bfin_read_IPEND() & ~0x8000;
other_ints = pending & (pending - 1);
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 3dba9c1..dbcf3e4 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -20,6 +20,7 @@
static char cmdline[256];
static unsigned long len;
+#ifndef CONFIG_SMP
static int num1 __attribute__((l1_data));
void kgdb_l1_test(void) __attribute__((l1_text));
@@ -32,6 +33,8 @@
printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
return ;
}
+#endif
+
#if L2_LENGTH
static int num2 __attribute__((l2));
@@ -59,10 +62,12 @@
static int test_proc_output(char *buf)
{
kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
kgdb_l1_test();
- #if L2_LENGTH
+#endif
+#if L2_LENGTH
kgdb_l2_test();
- #endif
+#endif
return 0;
}
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 594e325..d76618d 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -45,6 +45,7 @@
#include <asm/asm-offsets.h>
#include <asm/dma.h>
#include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
#include <asm/mem_map.h>
#define TEXT_OFFSET 0
@@ -240,7 +241,7 @@
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(tmp) <= FIXED_CODE_END) {
- memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+ copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
copied = sizeof(tmp);
} else
@@ -320,7 +321,7 @@
} else if (addr >= FIXED_CODE_START
&& addr + sizeof(data) <= FIXED_CODE_END) {
- memcpy((void *)(addr), &data, sizeof(data));
+ copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
copied = sizeof(data);
} else
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index e5c1162..a58687b 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -889,6 +889,10 @@
CPU, bfin_revid());
}
+ /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+ if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+ panic("You can't run on this processor due to 05000448\n");
+
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1141,12 +1145,12 @@
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
- "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+ "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
icache_size, dcache_size,
#if defined CONFIG_BFIN_WB
- "wb"
+ "-wb"
#elif defined CONFIG_BFIN_WT
- "wt"
+ "-wt"
#endif
"", 0);
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 172b4c5..1bbacfb 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -134,7 +134,10 @@
write_seqlock(&xtime_lock);
#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+ /*
+ * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+ * enabled.
+ */
if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
#endif
do_timer(1);
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0e17534..41f2eac 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -113,7 +113,6 @@
.name = "bfin_mac",
.dev.platform_data = &bfin_mii_bus,
};
-#endif
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@
.dev.platform_data = &ksz8893m_switch_data,
};
#endif
+#endif
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@
};
#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
/* SPI SWITCH CHIP */
@@ -179,10 +180,11 @@
.bits_per_word = 8,
};
#endif
+#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -259,6 +261,7 @@
},
#endif
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#if defined(CONFIG_NET_DSA_KSZ8893M) \
|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
{
@@ -271,24 +274,15 @@
.mode = SPI_MODE_3,
},
#endif
+#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
@@ -630,11 +624,10 @@
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mii_bus,
&bfin_mac_device,
-#endif
-
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
&ksz8893m_switch_device,
#endif
+#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index e5b4bef..c847bb1 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -2,12 +2,12 @@
* File: include/asm-blackfin/mach-bf518/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - ????
+ * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -19,6 +19,8 @@
#define ANOMALY_05000122 (1)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@@ -53,6 +55,12 @@
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
#define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
@@ -65,15 +73,20 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index b50a63b..e21c1c3 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@@ -158,7 +158,7 @@
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 856c097..48e69ee 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -487,9 +487,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -585,23 +585,13 @@
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 83606fc..7fe480e 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -256,9 +256,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -366,23 +366,13 @@
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 035e8d8..df6808d 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf527/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -167,12 +167,16 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
#define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 75722d6..e8c41fd 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@@ -158,7 +158,7 @@
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 308c98d..8d8b3e7 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -38,9 +38,4 @@
help
Core support for IP04/IP04 open hardware IP-PBX.
-config GENERIC_BF533_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 9afbe72..ff1e832 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,6 @@
# arch/blackfin/mach-bf533/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f..0765872 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -129,23 +129,13 @@
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7..e897487 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -138,23 +138,13 @@
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644
index 986eeec..0000000
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf533/generic_board.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created: 2005
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .start = 0x20300300,
- .end = 0x20300300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7..f19b633 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/*
* CPOL (Clock Polarity)
* 0 - Active high SCK
@@ -152,14 +152,13 @@
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 2,
.bus_num = 1,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
},
#endif
};
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 0d3a034..1cf893e 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -160,7 +160,7 @@
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index f3d9e49..5f517f5 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@
CH_UART_TX,
CH_UART_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 42a57b0..77c59da 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -33,9 +33,4 @@
help
Board supply package for CSP Minotaur
-config GENERIC_BF537_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 7168cc1..68b98a7a 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,7 +2,6 @@
# arch/blackfin/mach-bf537/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 9cd8fb2..41c75b9 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -108,9 +108,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -160,23 +160,13 @@
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 1,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
deleted file mode 100644
index da710fd..0000000
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
- [0] = {
- .start = 0x203C0000,
- .end = 0x203C0000 + 0x000fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp1760_platform_data isp1760_priv = {
- .is_isp1761 = 0,
- .port1_disable = 0,
- .bus_width_16 = 1,
- .port1_otg = 0,
- .analog_oc = 0,
- .dack_polarity_high = 0,
- .dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1760_priv,
- },
- .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
- .resource = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
- {
- .start = 0x20310000, /* IO PORT */
- .end = 0x20312000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20311000, /* Attribute Memory */
- .end = 0x20311FFF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF4,
- .end = IRQ_PF4,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- }, {
- .start = 6, /* Card Detect PF6 */
- .end = 6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
- .name = "bfin_cf_pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
- .resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .name = "smc91x-regs",
- .start = 0x20300300,
- .end = 0x20300300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
-
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
- [0] = {
- .start = 0x203FB800,
- .end = 0x203FB800 + 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0x203FB800 + 4,
- .end = 0x203FB800 + 5,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
- },
-};
-
-static struct platform_device dm9000_device = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(dm9000_resources),
- .resource = dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
- {
- .start = 0x20340000,
- .end = 0x20340000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20340004,
- .end = 0x20340004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_SL811_BFIN_IRQ,
- .end = CONFIG_USB_SL811_BFIN_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
- gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
- gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
- .potpg = 10,
- .power = 250, /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
- .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
- .name = "sl811-hcd",
- .id = 0,
- .dev = {
- .platform_data = &sl811_priv,
- },
- .num_resources = ARRAY_SIZE(sl811_hcd_resources),
- .resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
- .name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
- .name = "bfin_mac",
- .dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
- {
- .start = 0x20300000,
- .end = 0x20300000 + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device net2272_bfin_device = {
- .name = "net2272",
- .id = -1,
- .num_resources = ARRAY_SIZE(net2272_bfin_resources),
- .resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x00020000,
- .offset = 0,
- .mask_flags = MTD_CAP_ROM
- }, {
- .name = "linux kernel(spi)",
- .size = 0xe0000,
- .offset = 0x20000
- }, {
- .name = "file system(spi)",
- .size = 0x700000,
- .offset = 0x00100000,
- }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
- .name = "m25p80",
- .parts = bfin_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
- .enable_dma = 0, /* use dma transfer with this chip*/
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .enable_dma = 1, /* use dma transfer with this chip*/
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
- .bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
- .ctl_reg = 0x4, /* send zero */
- .enable_dma = 0,
- .bits_per_word = 8,
- .cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .enable_dma = 0,
- .bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
- .model = 7877,
- .vref_delay_usecs = 50, /* internal, no capacitor */
- .x_plate_ohms = 419,
- .y_plate_ohms = 486,
- .pressure_max = 1000,
- .pressure_min = 0,
- .stopacq_polarity = 1,
- .first_conversion_delay = 3,
- .acquisition_time = 1,
- .averaging = 1,
- .pen_down_acc_interval = 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
- {
- /* the modalias must be the same as spi device driver name */
- .modalias = "m25p80", /* Name of spi_driver for this device */
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
- .platform_data = &bfin_spi_flash_data,
- .controller_data = &spi_flash_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
- || defined(CONFIG_SPI_ADC_BF533_MODULE)
- {
- .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
- .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* Framework chip select. */
- .platform_data = NULL, /* No spi_driver specific config */
- .controller_data = &spi_adc_chip_info,
- },
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
- || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
- {
- .modalias = "ad1836-spi",
- .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
- .controller_data = &ad1836_spi_chip_info,
- },
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
- {
- .modalias = "ad9960-spi",
- .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = &ad9960_spi_chip_info,
- },
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
- {
- .modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-#if defined(CONFIG_PBX)
- {
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 8 - CONFIG_J11_JUMPER,
- .controller_data = &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 8 - CONFIG_J19_JUMPER,
- .controller_data = &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
- {
- .modalias = "ad7877",
- .platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- .controller_data = &spi_ad7877_chip_info,
- },
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
- .num_chipselect = 8,
- .enable_dma = 1, /* master has the ability to do dma transfer */
- .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
- [0] = {
- .start = SPI0_REGBASE,
- .end = SPI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CH_SPI,
- .end = CH_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_spi0_device = {
- .name = "bfin-spi",
- .id = 0, /* Bus number */
- .num_resources = ARRAY_SIZE(bfin_spi0_resource),
- .resource = bfin_spi0_resource,
- .dev = {
- .platform_data = &bfin_spi0_info, /* Passed to driver */
- },
-};
-#endif /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
- {
- .start = 0xFFC02000,
- .end = 0xFFC020FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART1_RX,
- .end = IRQ_UART1_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART1_RX,
- .end = CH_UART1_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir1_device = {
- .name = "bfin_sir",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_sir1_resources),
- .resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
- [0] = {
- .start = TWI0_REGBASE,
- .end = TWI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_TWI,
- .end = IRQ_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device i2c_bfin_twi_device = {
- .name = "i2c-bfin-twi",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_twi0_resource),
- .resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
- .name = "bfin-sport-uart",
- .id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
- .name = "bfin-sport-uart",
- .id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
- &bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
- &rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
- &sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
- &dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
- &bfin_mii_bus,
- &bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
- &net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
- &bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- &bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
- &bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
- &bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
- &i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
- &bfin_sport0_uart_device,
- &bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
- return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
- /* workaround reboot hang when booting from SPI */
- if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
- random_ether_addr(addr);
- printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index db7d3a3..3c15981 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -134,9 +134,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -156,23 +156,13 @@
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 0,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 590eb3a..4e1de1e 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -289,9 +289,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -364,23 +364,13 @@
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 3f4f203..53ad10f 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -108,9 +108,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -160,23 +160,13 @@
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc_dummy",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 7,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 9cb3912..1bfd80c 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -110,7 +110,7 @@
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@@ -168,9 +168,12 @@
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b3f87e1..9e34700 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@@ -158,7 +158,7 @@
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index e130b4f..3a56998 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf538/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -120,13 +120,17 @@
#define ANOMALY_05000198 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 40503b6..3c2811e 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@@ -158,7 +158,7 @@
CH_UART1_TX,
CH_UART1_RX,
#endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART1_CTS_PIN,
CONFIG_UART1_RTS_PIN,
#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 23d03c5..882e40c 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,12 +2,12 @@
* File: include/asm-blackfin/mach-bf548/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* This file shoule be up to date with:
- * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@@ -157,8 +155,22 @@
#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
@@ -171,6 +183,8 @@
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index e4cf35e..c05e79c 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -63,7 +63,7 @@
#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
@@ -74,12 +74,12 @@
# define CONFIG_UART0_RTS_PIN -1
# endif
-# ifndef CONFIG_UART1_CTS_PIN
-# define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+# define CONFIG_UART2_CTS_PIN -1
# endif
-# ifndef CONFIG_UART1_RTS_PIN
-# define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+# define CONFIG_UART2_RTS_PIN -1
# endif
#endif
@@ -130,7 +130,7 @@
CH_UART0_TX,
CH_UART0_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
@@ -144,6 +144,10 @@
CH_UART1_TX,
CH_UART1_RX,
#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ 0,
+ 0,
+#endif
},
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
@@ -154,7 +158,7 @@
CH_UART2_TX,
CH_UART2_RX,
#endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART2_CTS_PIN,
CONFIG_UART2_RTS_PIN,
#endif
@@ -168,6 +172,10 @@
CH_UART3_TX,
CH_UART3_RX,
#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ 0,
+ 0,
+#endif
},
#endif
};
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 60299a7..f194625 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -123,8 +123,8 @@
#define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
#define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
#define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
#define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
@@ -361,8 +361,8 @@
#define IRQ_UART2_ERR IRQ_UART2_ERROR
#define IRQ_CAN0_ERR IRQ_CAN0_ERROR
#define IRQ_MXVR_ERR IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR
#define IRQ_UART3_ERR IRQ_UART3_ERROR
#define IRQ_HOST_ERR IRQ_HOST_ERROR
#define IRQ_PIXC_ERR IRQ_PIXC_ERROR
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e41a67b..e4bc6d7 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,9 +19,4 @@
help
CM-BF561 support for EVAL- and DEV-Board.
-config GENERIC_BF561_BOARD
- bool "Generic"
- help
- Generic or Custom board support.
-
endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 04add01..3a15255 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,6 @@
# arch/blackfin/mach-bf561/boards/Makefile
#
-obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6880d1e..f623c6b 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -105,9 +105,9 @@
};
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
- .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+ .enable_dma = 0,
.bits_per_word = 8,
};
#endif
@@ -155,14 +155,13 @@
.controller_data = &ad9960_spi_chip_info,
},
#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
- .modalias = "spi_mmc",
+ .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = CONFIG_SPI_MMC_CS_CHAN,
- .platform_data = NULL,
- .controller_data = &spi_mmc_chip_info,
+ .chip_select = 5,
+ .controller_data = &mmc_spi_chip_info,
.mode = SPI_MODE_3,
},
#endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
deleted file mode 100644
index 0ba366a..0000000
--- a/arch/blackfin/mach-bf561/boards/generic_board.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf561/generic_board.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- * Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
- {
- .start = 0x2C010300,
- .end = 0x2C010300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PROG_INTB,
- .end = IRQ_PROG_INTB,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- }, {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
- &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
- return platform_add_devices(generic_board_devices,
- ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 1a9e175..d0b0b35 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -224,7 +224,7 @@
#define ANOMALY_05000301 (1)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@@ -283,8 +283,11 @@
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 043bfcf..ca8c5f6 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@
CH_UART_TX,
CH_UART_RX,
#endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
CONFIG_UART0_CTS_PIN,
CONFIG_UART0_RTS_PIN,
#endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 98133b9..80d39b2 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -62,3 +62,12 @@
#if (CONFIG_BOOT_LOAD & 0x3)
# error "The kernel load address must be 4 byte aligned"
#endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 3c98dac..aa0648c 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -66,11 +66,33 @@
/* Invalidate all instruction cache lines assocoiated with this memory area */
ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+ P0 = R0;
+ IFLUSH[P0];
do_flush IFLUSH, , nop
ENDPROC(_blackfin_icache_flush_range)
/* Flush all cache lines assocoiated with this area of memory. */
ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+ P0 = R0;
+ IFLUSH[P0];
do_flush FLUSH, IFLUSH
ENDPROC(_blackfin_icache_dcache_flush_range)
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 9dddb6f..3539365 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -17,7 +17,7 @@
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
- (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+ (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
__attribute__((l1_text))
static void do_sync(void)
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 4da50bc..8009a51 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -376,10 +376,22 @@
#endif
#ifdef PINT0_ASSIGN
+ PM_SYS_PUSH(PINT0_MASK_SET)
+ PM_SYS_PUSH(PINT1_MASK_SET)
+ PM_SYS_PUSH(PINT2_MASK_SET)
+ PM_SYS_PUSH(PINT3_MASK_SET)
PM_SYS_PUSH(PINT0_ASSIGN)
PM_SYS_PUSH(PINT1_ASSIGN)
PM_SYS_PUSH(PINT2_ASSIGN)
PM_SYS_PUSH(PINT3_ASSIGN)
+ PM_SYS_PUSH(PINT0_INVERT_SET)
+ PM_SYS_PUSH(PINT1_INVERT_SET)
+ PM_SYS_PUSH(PINT2_INVERT_SET)
+ PM_SYS_PUSH(PINT3_INVERT_SET)
+ PM_SYS_PUSH(PINT0_EDGE_SET)
+ PM_SYS_PUSH(PINT1_EDGE_SET)
+ PM_SYS_PUSH(PINT2_EDGE_SET)
+ PM_SYS_PUSH(PINT3_EDGE_SET)
#endif
PM_SYS_PUSH(EBIU_AMBCTL0)
@@ -714,10 +726,22 @@
PM_SYS_POP(EBIU_AMBCTL0)
#ifdef PINT0_ASSIGN
+ PM_SYS_POP(PINT3_EDGE_SET)
+ PM_SYS_POP(PINT2_EDGE_SET)
+ PM_SYS_POP(PINT1_EDGE_SET)
+ PM_SYS_POP(PINT0_EDGE_SET)
+ PM_SYS_POP(PINT3_INVERT_SET)
+ PM_SYS_POP(PINT2_INVERT_SET)
+ PM_SYS_POP(PINT1_INVERT_SET)
+ PM_SYS_POP(PINT0_INVERT_SET)
PM_SYS_POP(PINT3_ASSIGN)
PM_SYS_POP(PINT2_ASSIGN)
PM_SYS_POP(PINT1_ASSIGN)
PM_SYS_POP(PINT0_ASSIGN)
+ PM_SYS_POP(PINT3_MASK_SET)
+ PM_SYS_POP(PINT2_MASK_SET)
+ PM_SYS_POP(PINT1_MASK_SET)
+ PM_SYS_POP(PINT0_MASK_SET)
#endif
#ifdef SICA_IWR1
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 88de053..21e65a3 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -600,6 +600,19 @@
p2 = [p2];
[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+ r0 = sp;
+ SP += -12;
+ call ___ipipe_syscall_root;
+ SP += 12;
+ cc = r0 == 1;
+ if cc jump .Lsyscall_really_exit;
+ cc = r0 == -1;
+ if cc jump .Lresume_userspace;
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
/* Check the System Call */
r7 = __NR_syscall;
@@ -654,6 +667,17 @@
r7 = r7 & r4;
.Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+ cc = BITTST(r7, TIF_IRQ_SYNC);
+ if !cc jump .Lsyscall_no_irqsync;
+ [--sp] = reti;
+ r0 = [sp++];
+ SP += -12;
+ call ___ipipe_sync_root;
+ SP += 12;
+ jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lsyscall_sigpending;
@@ -685,6 +709,10 @@
.Lsyscall_really_exit:
r5 = [sp + PT_RESERVED];
rets = r5;
+#ifdef CONFIG_IPIPE
+ [--sp] = reti;
+ r5 = [sp++];
+#endif /* CONFIG_IPIPE */
rts;
ENDPROC(_system_call)
@@ -771,6 +799,15 @@
ENDPROC(_resume)
ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+ [--sp] = rets;
+ SP += -12;
+ call ___ipipe_check_root
+ SP += 12
+ rets = [sp++];
+ cc = r0 == 0;
+ if cc jump 4f; /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
@@ -827,6 +864,28 @@
rts;
ENDPROC(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+ [--sp] = reti; /* Reenable interrupts */
+ r0 = [sp++];
+ jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+ r0.l = _sync_root_irqs
+ r0.h = _sync_root_irqs
+ [--sp] = rets;
+ [--sp] = ( r7:4, p5:3 );
+ SP += -12;
+ call ___ipipe_call_irqtail
+ SP += 12;
+ ( r7:4, p5:3 ) = [sp++];
+ rets = [sp++];
+ rts
+#else
+#define _resume_kernel_from_int 2f
+#endif
+
ENTRY(_return_from_int)
/* If someone else already raised IRQ 15, do nothing. */
csync;
@@ -848,7 +907,7 @@
r1 = r0 - r1;
r2 = r0 & r1;
cc = r2 == 0;
- if !cc jump 2f;
+ if !cc jump _resume_kernel_from_int;
/* Lower the interrupt level to 15. */
p0.l = lo(EVT15);
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 43c4eb9..0069c2d 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -235,6 +235,7 @@
#ifdef CONFIG_IPIPE
ENTRY(___ipipe_call_irqtail)
+ p0 = r0;
r0.l = 1f;
r0.h = 1f;
reti = r0;
@@ -242,9 +243,6 @@
1:
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
- p0.l = ___ipipe_irq_tail_hook;
- p0.h = ___ipipe_irq_tail_hook;
- p0 = [p0];
sp += -12;
call (p0);
sp += 12;
@@ -259,7 +257,7 @@
p0.h = hi(EVT14);
[p0] = r0;
csync;
- r0 = 0x401f;
+ r0 = 0x401f (z);
sti r0;
raise 14;
[--sp] = reti; /* IRQs on. */
@@ -277,11 +275,7 @@
p0.h = _bfin_irq_flags;
r0 = [p0];
sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
- /* Reenable interrupts */
- [--sp] = reti;
- r0 = [sp++];
-#endif
rts;
ENDPROC(___ipipe_call_irqtail)
+
#endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 2024945..a7d7b2d 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -161,11 +161,15 @@
static void bfin_internal_mask_irq(unsigned int irq)
{
+ unsigned long flags;
+
#ifdef CONFIG_BF53x
+ local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
+ local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -175,15 +179,20 @@
~(1 << mask_bit));
#endif
#endif
+ local_irq_restore_hw(flags);
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
+ unsigned long flags;
+
#ifdef CONFIG_BF53x
+ local_irq_save_hw(flags);
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << SIC_SYSIRQ(irq)));
#else
unsigned mask_bank, mask_bit;
+ local_irq_save_hw(flags);
mask_bank = SIC_SYSIRQ(irq) / 32;
mask_bit = SIC_SYSIRQ(irq) % 32;
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@@ -193,6 +202,7 @@
(1 << mask_bit));
#endif
#endif
+ local_irq_restore_hw(flags);
}
#ifdef CONFIG_PM
@@ -390,7 +400,7 @@
static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
{
#ifdef CONFIG_IPIPE
- _set_irq_handler(irq, handle_edge_irq);
+ _set_irq_handler(irq, handle_level_irq);
#else
struct irq_desc *desc = irq_desc + irq;
/* May not call generic set_irq_handler() due to spinlock
@@ -1055,13 +1065,18 @@
#endif
default:
#ifdef CONFIG_IPIPE
- /*
- * We want internal interrupt sources to be masked, because
- * ISRs may trigger interrupts recursively (e.g. DMA), but
- * interrupts are _not_ masked at CPU level. So let's handle
- * them as level interrupts.
- */
- set_irq_handler(irq, handle_level_irq);
+ /*
+ * We want internal interrupt sources to be
+ * masked, because ISRs may trigger interrupts
+ * recursively (e.g. DMA), but interrupts are
+ * _not_ masked at CPU level. So let's handle
+ * most of them as level interrupts, except
+ * the timer interrupt which is special.
+ */
+ if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+ set_irq_handler(irq, handle_simple_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
#else /* !CONFIG_IPIPE */
set_irq_handler(irq, handle_simple_irq);
#endif /* !CONFIG_IPIPE */
@@ -1123,9 +1138,8 @@
#ifdef CONFIG_IPIPE
for (irq = 0; irq < NR_IRQS; irq++) {
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
desc->ic_prio = __ipipe_get_irq_priority(irq);
- desc->thr_prio = __ipipe_get_irqthread_priority(irq);
}
#endif /* CONFIG_IPIPE */
@@ -1208,76 +1222,21 @@
return IVG15;
}
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
- int ient, prio;
- int demux_irq;
-
- /* The returned priority value is rescaled to [0..IVG13+1]
- * with 0 being the lowest effective priority level. */
-
- if (irq <= IRQ_CORETMR)
- return IVG13 - irq + 1;
-
- /* GPIO IRQs are given the priority of the demux
- * interrupt. */
- if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
- u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
- demux_irq = (bank == 0 ? IRQ_PINT0 :
- bank == 1 ? IRQ_PINT1 :
- bank == 2 ? IRQ_PINT2 :
- IRQ_PINT3);
-#elif defined(CONFIG_BF561)
- demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
- irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
- IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
- demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
- irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
- IRQ_PORTF_INTA);
-#else
- demux_irq = irq;
-#endif
- return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
- }
-
- /* The GPIO demux interrupt is given a lower priority
- * than the GPIO IRQs, so that its threaded handler
- * unmasks the interrupt line after the decoded IRQs
- * have been processed. */
- prio = PRIO_GPIODEMUX(irq);
- /* demux irq? */
- if (prio != -1)
- return IVG13 - prio;
-
- for (ient = 0; ient < NR_PERI_INTS; ient++) {
- struct ivgx *ivg = ivg_table + ient;
- if (ivg->irqno == irq) {
- for (prio = 0; prio <= IVG13-IVG7; prio++) {
- if (ivg7_13[prio].ifirst <= ivg &&
- ivg7_13[prio].istop > ivg)
- return IVG7 - prio;
- }
- }
- }
-
- return 0;
-}
-
/* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
#ifdef CONFIG_DO_IRQ_L1
__attribute__((l1_text))
#endif
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
+ struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+ struct ipipe_domain *this_domain = ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
- int irq;
+ int irq, s;
if (likely(vec == EVT_IVTMR_P)) {
irq = IRQ_CORETMR;
- goto handle_irq;
+ goto core_tick;
}
SSYNC();
@@ -1319,24 +1278,39 @@
irq = ivg->irqno;
if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
/* This is basically what we need from the register frame. */
__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
- if (!ipipe_root_domain_p)
- __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
- else
+ if (this_domain != ipipe_root_domain)
__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+ else
+ __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
}
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+ if (this_domain == ipipe_root_domain) {
+ s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+ barrier();
+ }
ipipe_trace_irq_entry(irq);
__ipipe_handle_irq(irq, regs);
- ipipe_trace_irq_exit(irq);
+ ipipe_trace_irq_exit(irq);
- if (ipipe_root_domain_p)
- return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+ if (this_domain == ipipe_root_domain) {
+ set_thread_flag(TIF_IRQ_SYNC);
+ if (!s) {
+ __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+ return !test_bit(IPIPE_STALL_FLAG, &p->status);
+ }
+ }
return 0;
}
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 77c9928..93eab61 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -158,10 +158,14 @@
kfree(msg);
break;
case BFIN_IPI_CALL_FUNC:
+ spin_unlock(&msg_queue->lock);
ipi_call_function(cpu, msg);
+ spin_lock(&msg_queue->lock);
break;
case BFIN_IPI_CPU_STOP:
+ spin_unlock(&msg_queue->lock);
ipi_cpu_stop(cpu);
+ spin_lock(&msg_queue->lock);
kfree(msg);
break;
default:
@@ -457,7 +461,7 @@
smp_flush_data.start = start;
smp_flush_data.end = end;
- if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+ if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index d0532b7..9c3629b 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -104,7 +104,7 @@
}
}
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
{
unsigned int cpu = raw_smp_processor_id();
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index e626e50..060df4a 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -135,11 +135,10 @@
if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
pci_addr = IS_PIC_SOFT(pcibus_info) ?
PHYS_TO_DMA(paddr) :
- PHYS_TO_TIODMA(paddr) | dma_attributes;
+ PHYS_TO_TIODMA(paddr);
else
- pci_addr = IS_PIC_SOFT(pcibus_info) ?
- paddr :
- paddr | dma_attributes;
+ pci_addr = paddr;
+ pci_addr |= dma_attributes;
/* Handle Bus mode */
if (IS_PCIX(pcibus_info))
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
index 40d1112..85c41b7 100644
--- a/arch/m68k/include/asm/param.h
+++ b/arch/m68k/include/asm/param.h
@@ -1,5 +1,26 @@
-#ifdef __uClinux__
-#include "param_no.h"
-#else
-#include "param_mm.h"
+#ifndef _M68K_PARAM_H
+#define _M68K_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
+# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#ifdef __uClinux__
+#define EXEC_PAGESIZE 4096
+#else
+#define EXEC_PAGESIZE 8192
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _M68K_PARAM_H */
diff --git a/arch/m68k/include/asm/param_mm.h b/arch/m68k/include/asm/param_mm.h
deleted file mode 100644
index 536a278..0000000
--- a/arch/m68k/include/asm/param_mm.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68K_PARAM_H
-#define _M68K_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 8192
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _M68K_PARAM_H */
diff --git a/arch/m68k/include/asm/param_no.h b/arch/m68k/include/asm/param_no.h
deleted file mode 100644
index 6044397..0000000
--- a/arch/m68k/include/asm/param_no.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _M68KNOMMU_PARAM_H
-#define _M68KNOMMU_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-#define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _M68KNOMMU_PARAM_H */
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index e83cd2f..8c9194b 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -1,5 +1,87 @@
-#ifdef __uClinux__
-#include "ptrace_no.h"
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1 0
+#define PT_D2 1
+#define PT_D3 2
+#define PT_D4 3
+#define PT_D5 4
+#define PT_D6 5
+#define PT_D7 6
+#define PT_A0 7
+#define PT_A1 8
+#define PT_A2 9
+#define PT_A3 10
+#define PT_A4 11
+#define PT_A5 12
+#define PT_A6 13
+#define PT_D0 14
+#define PT_USP 15
+#define PT_ORIG_D0 16
+#define PT_SR 17
+#define PT_PC 18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long d1;
+ long d2;
+ long d3;
+ long d4;
+ long d5;
+ long a0;
+ long a1;
+ long a2;
+ long d0;
+ long orig_d0;
+ long stkadj;
+#ifdef CONFIG_COLDFIRE
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+ unsigned short sr;
+ unsigned long pc;
#else
-#include "ptrace_mm.h"
+ unsigned short sr;
+ unsigned long pc;
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long d6;
+ unsigned long d7;
+ unsigned long a3;
+ unsigned long a4;
+ unsigned long a5;
+ unsigned long a6;
+ unsigned long retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S (0x2000)
+#define PS_M (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/ptrace_mm.h b/arch/m68k/include/asm/ptrace_mm.h
deleted file mode 100644
index 57e763d..0000000
--- a/arch/m68k/include/asm/ptrace_mm.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1 0
-#define PT_D2 1
-#define PT_D3 2
-#define PT_D4 3
-#define PT_D5 4
-#define PT_D6 5
-#define PT_D7 6
-#define PT_A0 7
-#define PT_A1 8
-#define PT_A2 9
-#define PT_A3 10
-#define PT_A4 11
-#define PT_A5 12
-#define PT_A6 13
-#define PT_D0 14
-#define PT_USP 15
-#define PT_ORIG_D0 16
-#define PT_SR 17
-#define PT_PC 18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long d1;
- long d2;
- long d3;
- long d4;
- long d5;
- long a0;
- long a1;
- long a2;
- long d0;
- long orig_d0;
- long stkadj;
- unsigned short sr;
- unsigned long pc;
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long d6;
- unsigned long d7;
- unsigned long a3;
- unsigned long a4;
- unsigned long a5;
- unsigned long a6;
- unsigned long retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/ptrace_no.h b/arch/m68k/include/asm/ptrace_no.h
deleted file mode 100644
index 8c9194b..0000000
--- a/arch/m68k/include/asm/ptrace_no.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _M68K_PTRACE_H
-#define _M68K_PTRACE_H
-
-#define PT_D1 0
-#define PT_D2 1
-#define PT_D3 2
-#define PT_D4 3
-#define PT_D5 4
-#define PT_D6 5
-#define PT_D7 6
-#define PT_A0 7
-#define PT_A1 8
-#define PT_A2 9
-#define PT_A3 10
-#define PT_A4 11
-#define PT_A5 12
-#define PT_A6 13
-#define PT_D0 14
-#define PT_USP 15
-#define PT_ORIG_D0 16
-#define PT_SR 17
-#define PT_PC 18
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long d1;
- long d2;
- long d3;
- long d4;
- long d5;
- long a0;
- long a1;
- long a2;
- long d0;
- long orig_d0;
- long stkadj;
-#ifdef CONFIG_COLDFIRE
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
- unsigned short sr;
- unsigned long pc;
-#else
- unsigned short sr;
- unsigned long pc;
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long d6;
- unsigned long d7;
- unsigned long a3;
- unsigned long a4;
- unsigned long a5;
- unsigned long a6;
- unsigned long retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-#ifdef __KERNEL__
-
-#ifndef PS_S
-#define PS_S (0x2000)
-#define PS_M (0x1000)
-#endif
-
-#define user_mode(regs) (!((regs)->sr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-#endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
-#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 842f86f..4dfb395 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -1,5 +1,376 @@
-#ifdef __uClinux__
-#include "setup_no.h"
+/*
+** asm/setup.h -- Definition of the Linux/m68k setup information
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+** Added bi_atari part of the machine dependent union bi_un; for now it
+** contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+** Renamed to setup.h; added some useful macros to allow gcc some
+** optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+** Redesign of the boot information structure; moved boot information
+** structure to bootinfo.h
+*/
+
+#ifndef _M68K_SETUP_H
+#define _M68K_SETUP_H
+
+
+
+ /*
+ * Linux/m68k Architectures
+ */
+
+#define MACH_AMIGA 1
+#define MACH_ATARI 2
+#define MACH_MAC 3
+#define MACH_APOLLO 4
+#define MACH_SUN3 5
+#define MACH_MVME147 6
+#define MACH_MVME16x 7
+#define MACH_BVME6000 8
+#define MACH_HP300 9
+#define MACH_Q40 10
+#define MACH_SUN3X 11
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+#define CL_SIZE COMMAND_LINE_SIZE
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_machtype;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_AMIGA)
+# define MACH_IS_AMIGA (0)
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
#else
-#include "setup_mm.h"
+# define MACH_AMIGA_ONLY
+# define MACH_IS_AMIGA (1)
+# define MACH_TYPE (MACH_AMIGA)
#endif
+
+#if !defined(CONFIG_ATARI)
+# define MACH_IS_ATARI (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
+#else
+# define MACH_ATARI_ONLY
+# define MACH_IS_ATARI (1)
+# define MACH_TYPE (MACH_ATARI)
+#endif
+
+#if !defined(CONFIG_MAC)
+# define MACH_IS_MAC (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_MAC (m68k_machtype == MACH_MAC)
+#else
+# define MACH_MAC_ONLY
+# define MACH_IS_MAC (1)
+# define MACH_TYPE (MACH_MAC)
+#endif
+
+#if defined(CONFIG_SUN3)
+#define MACH_IS_SUN3 (1)
+#define MACH_SUN3_ONLY (1)
+#define MACH_TYPE (MACH_SUN3)
+#else
+#define MACH_IS_SUN3 (0)
+#endif
+
+#if !defined (CONFIG_APOLLO)
+# define MACH_IS_APOLLO (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
+#else
+# define MACH_APOLLO_ONLY
+# define MACH_IS_APOLLO (1)
+# define MACH_TYPE (MACH_APOLLO)
+#endif
+
+#if !defined (CONFIG_MVME147)
+# define MACH_IS_MVME147 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
+#else
+# define MACH_MVME147_ONLY
+# define MACH_IS_MVME147 (1)
+# define MACH_TYPE (MACH_MVME147)
+#endif
+
+#if !defined (CONFIG_MVME16x)
+# define MACH_IS_MVME16x (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
+#else
+# define MACH_MVME16x_ONLY
+# define MACH_IS_MVME16x (1)
+# define MACH_TYPE (MACH_MVME16x)
+#endif
+
+#if !defined (CONFIG_BVME6000)
+# define MACH_IS_BVME6000 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
+#else
+# define MACH_BVME6000_ONLY
+# define MACH_IS_BVME6000 (1)
+# define MACH_TYPE (MACH_BVME6000)
+#endif
+
+#if !defined (CONFIG_HP300)
+# define MACH_IS_HP300 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
+#else
+# define MACH_HP300_ONLY
+# define MACH_IS_HP300 (1)
+# define MACH_TYPE (MACH_HP300)
+#endif
+
+#if !defined (CONFIG_Q40)
+# define MACH_IS_Q40 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+# define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
+#else
+# define MACH_Q40_ONLY
+# define MACH_IS_Q40 (1)
+# define MACH_TYPE (MACH_Q40)
+#endif
+
+#if !defined (CONFIG_SUN3X)
+# define MACH_IS_SUN3X (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
+ || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
+#else
+# define CONFIG_SUN3X_ONLY
+# define MACH_IS_SUN3X (1)
+# define MACH_TYPE (MACH_SUN3X)
+#endif
+
+#ifndef MACH_TYPE
+# define MACH_TYPE (m68k_machtype)
+#endif
+
+#endif /* __KERNEL__ */
+
+
+ /*
+ * CPU, FPU and MMU types
+ *
+ * Note: we may rely on the following equalities:
+ *
+ * CPU_68020 == MMU_68851
+ * CPU_68030 == MMU_68030
+ * CPU_68040 == FPU_68040 == MMU_68040
+ * CPU_68060 == FPU_68060 == MMU_68060
+ */
+
+#define CPUB_68020 0
+#define CPUB_68030 1
+#define CPUB_68040 2
+#define CPUB_68060 3
+
+#define CPU_68020 (1<<CPUB_68020)
+#define CPU_68030 (1<<CPUB_68030)
+#define CPU_68040 (1<<CPUB_68040)
+#define CPU_68060 (1<<CPUB_68060)
+
+#define FPUB_68881 0
+#define FPUB_68882 1
+#define FPUB_68040 2 /* Internal FPU */
+#define FPUB_68060 3 /* Internal FPU */
+#define FPUB_SUNFPA 4 /* Sun-3 FPA */
+
+#define FPU_68881 (1<<FPUB_68881)
+#define FPU_68882 (1<<FPUB_68882)
+#define FPU_68040 (1<<FPUB_68040)
+#define FPU_68060 (1<<FPUB_68060)
+#define FPU_SUNFPA (1<<FPUB_SUNFPA)
+
+#define MMUB_68851 0
+#define MMUB_68030 1 /* Internal MMU */
+#define MMUB_68040 2 /* Internal MMU */
+#define MMUB_68060 3 /* Internal MMU */
+#define MMUB_APOLLO 4 /* Custom Apollo */
+#define MMUB_SUN3 5 /* Custom Sun-3 */
+
+#define MMU_68851 (1<<MMUB_68851)
+#define MMU_68030 (1<<MMUB_68030)
+#define MMU_68040 (1<<MMUB_68040)
+#define MMU_68060 (1<<MMUB_68060)
+#define MMU_SUN3 (1<<MMUB_SUN3)
+#define MMU_APOLLO (1<<MMUB_APOLLO)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_cputype;
+extern unsigned long m68k_fputype;
+extern unsigned long m68k_mmutype;
+#ifdef CONFIG_VME
+extern unsigned long vme_brdtype;
+#endif
+
+ /*
+ * m68k_is040or060 is != 0 for a '040 or higher;
+ * used numbers are 4 for 68040 and 6 for 68060.
+ */
+
+extern int m68k_is040or060;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_M68020)
+# define CPU_IS_020 (0)
+# define MMU_IS_851 (0)
+# define MMU_IS_SUN3 (0)
+#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+# define CPU_IS_020 (m68k_cputype & CPU_68020)
+# define MMU_IS_851 (m68k_mmutype & MMU_68851)
+# define MMU_IS_SUN3 (0) /* Sun3 not supported with other CPU enabled */
+#else
+# define CPU_M68020_ONLY
+# define CPU_IS_020 (1)
+#ifdef MACH_SUN3_ONLY
+# define MMU_IS_SUN3 (1)
+# define MMU_IS_851 (0)
+#else
+# define MMU_IS_SUN3 (0)
+# define MMU_IS_851 (1)
+#endif
+#endif
+
+#if !defined(CONFIG_M68030)
+# define CPU_IS_030 (0)
+# define MMU_IS_030 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+# define CPU_IS_030 (m68k_cputype & CPU_68030)
+# define MMU_IS_030 (m68k_mmutype & MMU_68030)
+#else
+# define CPU_M68030_ONLY
+# define CPU_IS_030 (1)
+# define MMU_IS_030 (1)
+#endif
+
+#if !defined(CONFIG_M68040)
+# define CPU_IS_040 (0)
+# define MMU_IS_040 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
+# define CPU_IS_040 (m68k_cputype & CPU_68040)
+# define MMU_IS_040 (m68k_mmutype & MMU_68040)
+#else
+# define CPU_M68040_ONLY
+# define CPU_IS_040 (1)
+# define MMU_IS_040 (1)
+#endif
+
+#if !defined(CONFIG_M68060)
+# define CPU_IS_060 (0)
+# define MMU_IS_060 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
+# define CPU_IS_060 (m68k_cputype & CPU_68060)
+# define MMU_IS_060 (m68k_mmutype & MMU_68060)
+#else
+# define CPU_M68060_ONLY
+# define CPU_IS_060 (1)
+# define MMU_IS_060 (1)
+#endif
+
+#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
+# define CPU_IS_020_OR_030 (0)
+#else
+# define CPU_M68020_OR_M68030
+# if defined(CONFIG_M68040) || defined(CONFIG_M68060)
+# define CPU_IS_020_OR_030 (!m68k_is040or060)
+# else
+# define CPU_M68020_OR_M68030_ONLY
+# define CPU_IS_020_OR_030 (1)
+# endif
+#endif
+
+#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
+# define CPU_IS_040_OR_060 (0)
+#else
+# define CPU_M68040_OR_M68060
+# if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+# define CPU_IS_040_OR_060 (m68k_is040or060)
+# else
+# define CPU_M68040_OR_M68060_ONLY
+# define CPU_IS_040_OR_060 (1)
+# endif
+#endif
+
+#define CPU_TYPE (m68k_cputype)
+
+#ifdef CONFIG_M68KFPU_EMU
+# ifdef CONFIG_M68KFPU_EMU_ONLY
+# define FPU_IS_EMU (1)
+# else
+# define FPU_IS_EMU (!m68k_fputype)
+# endif
+#else
+# define FPU_IS_EMU (0)
+#endif
+
+
+ /*
+ * Miscellaneous
+ */
+
+#define NUM_MEMINFO 4
+
+#ifndef __ASSEMBLY__
+struct mem_info {
+ unsigned long addr; /* physical address of memory chunk */
+ unsigned long size; /* length of memory chunk (in bytes) */
+};
+
+extern int m68k_num_memory; /* # of memory blocks found (and used) */
+extern int m68k_realnum_memory; /* real # of memory blocks found */
+extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/setup_mm.h b/arch/m68k/include/asm/setup_mm.h
deleted file mode 100644
index 4dfb395..0000000
--- a/arch/m68k/include/asm/setup_mm.h
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
-** asm/setup.h -- Definition of the Linux/m68k setup information
-**
-** Copyright 1992 by Greg Harp
-**
-** This file is subject to the terms and conditions of the GNU General Public
-** License. See the file COPYING in the main directory of this archive
-** for more details.
-**
-** Created 09/29/92 by Greg Harp
-**
-** 5/2/94 Roman Hodek:
-** Added bi_atari part of the machine dependent union bi_un; for now it
-** contains just a model field to distinguish between TT and Falcon.
-** 26/7/96 Roman Zippel:
-** Renamed to setup.h; added some useful macros to allow gcc some
-** optimizations if possible.
-** 5/10/96 Geert Uytterhoeven:
-** Redesign of the boot information structure; moved boot information
-** structure to bootinfo.h
-*/
-
-#ifndef _M68K_SETUP_H
-#define _M68K_SETUP_H
-
-
-
- /*
- * Linux/m68k Architectures
- */
-
-#define MACH_AMIGA 1
-#define MACH_ATARI 2
-#define MACH_MAC 3
-#define MACH_APOLLO 4
-#define MACH_SUN3 5
-#define MACH_MVME147 6
-#define MACH_MVME16x 7
-#define MACH_BVME6000 8
-#define MACH_HP300 9
-#define MACH_Q40 10
-#define MACH_SUN3X 11
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
-#define CL_SIZE COMMAND_LINE_SIZE
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_machtype;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_AMIGA)
-# define MACH_IS_AMIGA (0)
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
-#else
-# define MACH_AMIGA_ONLY
-# define MACH_IS_AMIGA (1)
-# define MACH_TYPE (MACH_AMIGA)
-#endif
-
-#if !defined(CONFIG_ATARI)
-# define MACH_IS_ATARI (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
-#else
-# define MACH_ATARI_ONLY
-# define MACH_IS_ATARI (1)
-# define MACH_TYPE (MACH_ATARI)
-#endif
-
-#if !defined(CONFIG_MAC)
-# define MACH_IS_MAC (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_MAC (m68k_machtype == MACH_MAC)
-#else
-# define MACH_MAC_ONLY
-# define MACH_IS_MAC (1)
-# define MACH_TYPE (MACH_MAC)
-#endif
-
-#if defined(CONFIG_SUN3)
-#define MACH_IS_SUN3 (1)
-#define MACH_SUN3_ONLY (1)
-#define MACH_TYPE (MACH_SUN3)
-#else
-#define MACH_IS_SUN3 (0)
-#endif
-
-#if !defined (CONFIG_APOLLO)
-# define MACH_IS_APOLLO (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
-#else
-# define MACH_APOLLO_ONLY
-# define MACH_IS_APOLLO (1)
-# define MACH_TYPE (MACH_APOLLO)
-#endif
-
-#if !defined (CONFIG_MVME147)
-# define MACH_IS_MVME147 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
-# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
-#else
-# define MACH_MVME147_ONLY
-# define MACH_IS_MVME147 (1)
-# define MACH_TYPE (MACH_MVME147)
-#endif
-
-#if !defined (CONFIG_MVME16x)
-# define MACH_IS_MVME16x (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
-#else
-# define MACH_MVME16x_ONLY
-# define MACH_IS_MVME16x (1)
-# define MACH_TYPE (MACH_MVME16x)
-#endif
-
-#if !defined (CONFIG_BVME6000)
-# define MACH_IS_BVME6000 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
-#else
-# define MACH_BVME6000_ONLY
-# define MACH_IS_BVME6000 (1)
-# define MACH_TYPE (MACH_BVME6000)
-#endif
-
-#if !defined (CONFIG_HP300)
-# define MACH_IS_HP300 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
-#else
-# define MACH_HP300_ONLY
-# define MACH_IS_HP300 (1)
-# define MACH_TYPE (MACH_HP300)
-#endif
-
-#if !defined (CONFIG_Q40)
-# define MACH_IS_Q40 (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
-# define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
-#else
-# define MACH_Q40_ONLY
-# define MACH_IS_Q40 (1)
-# define MACH_TYPE (MACH_Q40)
-#endif
-
-#if !defined (CONFIG_SUN3X)
-# define MACH_IS_SUN3X (0)
-#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
- || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
- || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
- || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
-# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
-#else
-# define CONFIG_SUN3X_ONLY
-# define MACH_IS_SUN3X (1)
-# define MACH_TYPE (MACH_SUN3X)
-#endif
-
-#ifndef MACH_TYPE
-# define MACH_TYPE (m68k_machtype)
-#endif
-
-#endif /* __KERNEL__ */
-
-
- /*
- * CPU, FPU and MMU types
- *
- * Note: we may rely on the following equalities:
- *
- * CPU_68020 == MMU_68851
- * CPU_68030 == MMU_68030
- * CPU_68040 == FPU_68040 == MMU_68040
- * CPU_68060 == FPU_68060 == MMU_68060
- */
-
-#define CPUB_68020 0
-#define CPUB_68030 1
-#define CPUB_68040 2
-#define CPUB_68060 3
-
-#define CPU_68020 (1<<CPUB_68020)
-#define CPU_68030 (1<<CPUB_68030)
-#define CPU_68040 (1<<CPUB_68040)
-#define CPU_68060 (1<<CPUB_68060)
-
-#define FPUB_68881 0
-#define FPUB_68882 1
-#define FPUB_68040 2 /* Internal FPU */
-#define FPUB_68060 3 /* Internal FPU */
-#define FPUB_SUNFPA 4 /* Sun-3 FPA */
-
-#define FPU_68881 (1<<FPUB_68881)
-#define FPU_68882 (1<<FPUB_68882)
-#define FPU_68040 (1<<FPUB_68040)
-#define FPU_68060 (1<<FPUB_68060)
-#define FPU_SUNFPA (1<<FPUB_SUNFPA)
-
-#define MMUB_68851 0
-#define MMUB_68030 1 /* Internal MMU */
-#define MMUB_68040 2 /* Internal MMU */
-#define MMUB_68060 3 /* Internal MMU */
-#define MMUB_APOLLO 4 /* Custom Apollo */
-#define MMUB_SUN3 5 /* Custom Sun-3 */
-
-#define MMU_68851 (1<<MMUB_68851)
-#define MMU_68030 (1<<MMUB_68030)
-#define MMU_68040 (1<<MMUB_68040)
-#define MMU_68060 (1<<MMUB_68060)
-#define MMU_SUN3 (1<<MMUB_SUN3)
-#define MMU_APOLLO (1<<MMUB_APOLLO)
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-extern unsigned long m68k_cputype;
-extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype;
-#ifdef CONFIG_VME
-extern unsigned long vme_brdtype;
-#endif
-
- /*
- * m68k_is040or060 is != 0 for a '040 or higher;
- * used numbers are 4 for 68040 and 6 for 68060.
- */
-
-extern int m68k_is040or060;
-#endif /* !__ASSEMBLY__ */
-
-#if !defined(CONFIG_M68020)
-# define CPU_IS_020 (0)
-# define MMU_IS_851 (0)
-# define MMU_IS_SUN3 (0)
-#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-# define CPU_IS_020 (m68k_cputype & CPU_68020)
-# define MMU_IS_851 (m68k_mmutype & MMU_68851)
-# define MMU_IS_SUN3 (0) /* Sun3 not supported with other CPU enabled */
-#else
-# define CPU_M68020_ONLY
-# define CPU_IS_020 (1)
-#ifdef MACH_SUN3_ONLY
-# define MMU_IS_SUN3 (1)
-# define MMU_IS_851 (0)
-#else
-# define MMU_IS_SUN3 (0)
-# define MMU_IS_851 (1)
-#endif
-#endif
-
-#if !defined(CONFIG_M68030)
-# define CPU_IS_030 (0)
-# define MMU_IS_030 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
-# define CPU_IS_030 (m68k_cputype & CPU_68030)
-# define MMU_IS_030 (m68k_mmutype & MMU_68030)
-#else
-# define CPU_M68030_ONLY
-# define CPU_IS_030 (1)
-# define MMU_IS_030 (1)
-#endif
-
-#if !defined(CONFIG_M68040)
-# define CPU_IS_040 (0)
-# define MMU_IS_040 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
-# define CPU_IS_040 (m68k_cputype & CPU_68040)
-# define MMU_IS_040 (m68k_mmutype & MMU_68040)
-#else
-# define CPU_M68040_ONLY
-# define CPU_IS_040 (1)
-# define MMU_IS_040 (1)
-#endif
-
-#if !defined(CONFIG_M68060)
-# define CPU_IS_060 (0)
-# define MMU_IS_060 (0)
-#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
-# define CPU_IS_060 (m68k_cputype & CPU_68060)
-# define MMU_IS_060 (m68k_mmutype & MMU_68060)
-#else
-# define CPU_M68060_ONLY
-# define CPU_IS_060 (1)
-# define MMU_IS_060 (1)
-#endif
-
-#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
-# define CPU_IS_020_OR_030 (0)
-#else
-# define CPU_M68020_OR_M68030
-# if defined(CONFIG_M68040) || defined(CONFIG_M68060)
-# define CPU_IS_020_OR_030 (!m68k_is040or060)
-# else
-# define CPU_M68020_OR_M68030_ONLY
-# define CPU_IS_020_OR_030 (1)
-# endif
-#endif
-
-#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
-# define CPU_IS_040_OR_060 (0)
-#else
-# define CPU_M68040_OR_M68060
-# if defined(CONFIG_M68020) || defined(CONFIG_M68030)
-# define CPU_IS_040_OR_060 (m68k_is040or060)
-# else
-# define CPU_M68040_OR_M68060_ONLY
-# define CPU_IS_040_OR_060 (1)
-# endif
-#endif
-
-#define CPU_TYPE (m68k_cputype)
-
-#ifdef CONFIG_M68KFPU_EMU
-# ifdef CONFIG_M68KFPU_EMU_ONLY
-# define FPU_IS_EMU (1)
-# else
-# define FPU_IS_EMU (!m68k_fputype)
-# endif
-#else
-# define FPU_IS_EMU (0)
-#endif
-
-
- /*
- * Miscellaneous
- */
-
-#define NUM_MEMINFO 4
-
-#ifndef __ASSEMBLY__
-struct mem_info {
- unsigned long addr; /* physical address of memory chunk */
- unsigned long size; /* length of memory chunk (in bytes) */
-};
-
-extern int m68k_num_memory; /* # of memory blocks found (and used) */
-extern int m68k_realnum_memory; /* real # of memory blocks found */
-extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/setup_no.h b/arch/m68k/include/asm/setup_no.h
deleted file mode 100644
index 45d286c..0000000
--- a/arch/m68k/include/asm/setup_no.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifdef __KERNEL__
-
-#include <asm/setup_mm.h>
-
-/* We have a bigger command line buffer. */
-#undef COMMAND_LINE_SIZE
-
-#endif /* __KERNEL__ */
-
-#define COMMAND_LINE_SIZE 512
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
index bff6d40..523db2a 100644
--- a/arch/m68k/include/asm/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -1,5 +1,24 @@
+#ifndef _ASM_M68k_SIGCONTEXT_H
+#define _ASM_M68k_SIGCONTEXT_H
+
+struct sigcontext {
+ unsigned long sc_mask; /* old sigmask */
+ unsigned long sc_usp; /* old user stack pointer */
+ unsigned long sc_d0;
+ unsigned long sc_d1;
+ unsigned long sc_a0;
+ unsigned long sc_a1;
#ifdef __uClinux__
-#include "sigcontext_no.h"
-#else
-#include "sigcontext_mm.h"
+ unsigned long sc_a5;
+#endif
+ unsigned short sc_sr;
+ unsigned long sc_pc;
+ unsigned short sc_formatvec;
+#ifndef __uClinux__
+ unsigned long sc_fpregs[2*3]; /* room for two fp registers */
+ unsigned long sc_fpcntl[3];
+ unsigned char sc_fpstate[216];
+#endif
+};
+
#endif
diff --git a/arch/m68k/include/asm/sigcontext_mm.h b/arch/m68k/include/asm/sigcontext_mm.h
deleted file mode 100644
index 64fbe34..0000000
--- a/arch/m68k/include/asm/sigcontext_mm.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_M68k_SIGCONTEXT_H
-#define _ASM_M68k_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_d0;
- unsigned long sc_d1;
- unsigned long sc_a0;
- unsigned long sc_a1;
- unsigned short sc_sr;
- unsigned long sc_pc;
- unsigned short sc_formatvec;
- unsigned long sc_fpregs[2*3]; /* room for two fp registers */
- unsigned long sc_fpcntl[3];
- unsigned char sc_fpstate[216];
-};
-
-#endif
diff --git a/arch/m68k/include/asm/sigcontext_no.h b/arch/m68k/include/asm/sigcontext_no.h
deleted file mode 100644
index 36c293f..0000000
--- a/arch/m68k/include/asm/sigcontext_no.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
-#define _ASM_M68KNOMMU_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_d0;
- unsigned long sc_d1;
- unsigned long sc_a0;
- unsigned long sc_a1;
- unsigned long sc_a5;
- unsigned short sc_sr;
- unsigned long sc_pc;
- unsigned short sc_formatvec;
-};
-
-#endif
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
index 61219d7..ca7dde8 100644
--- a/arch/m68k/include/asm/siginfo.h
+++ b/arch/m68k/include/asm/siginfo.h
@@ -1,5 +1,97 @@
-#ifdef __uClinux__
-#include "siginfo_no.h"
+#ifndef _M68K_SIGINFO_H
+#define _M68K_SIGINFO_H
+
+#ifndef __uClinux__
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#ifndef __uClinux__
+
+typedef struct siginfo {
+ int si_signo;
+ int si_errno;
+ int si_code;
+
+ union {
+ int _pad[SI_PAD_SIZE];
+
+ /* kill() */
+ struct {
+ __kernel_pid_t _pid; /* sender's pid */
+ __kernel_uid_t _uid; /* backwards compatibility */
+ __kernel_uid32_t _uid32; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+ sigval_t _sigval; /* same as below */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ __kernel_pid_t _pid; /* sender's pid */
+ __kernel_uid_t _uid; /* backwards compatibility */
+ sigval_t _sigval;
+ __kernel_uid32_t _uid32; /* sender's uid */
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ __kernel_pid_t _pid; /* which child */
+ __kernel_uid_t _uid; /* backwards compatibility */
+ int _status; /* exit code */
+ clock_t _utime;
+ clock_t _stime;
+ __kernel_uid32_t _uid32; /* sender's uid */
+ } _sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ void *_addr; /* faulting insn/memory ref. */
+ } _sigfault;
+
+ /* SIGPOLL */
+ struct {
+ int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+} siginfo_t;
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+/*
+ * How these fields are to be accessed.
+ */
+#undef si_uid
+#ifdef __KERNEL__
+#define si_uid _sifields._kill._uid32
+#define si_uid16 _sifields._kill._uid
#else
-#include "siginfo_mm.h"
+#define si_uid _sifields._kill._uid
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+ if (from->si_code < 0)
+ memcpy(to, from, sizeof(*to));
+ else
+ /* _sigchld is currently the largest know union member */
+ memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+#endif /* !__uClinux__ */
+
#endif
diff --git a/arch/m68k/include/asm/siginfo_mm.h b/arch/m68k/include/asm/siginfo_mm.h
deleted file mode 100644
index 05a8d6d..0000000
--- a/arch/m68k/include/asm/siginfo_mm.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _M68K_SIGINFO_H
-#define _M68K_SIGINFO_H
-
-#define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
-
-#include <asm-generic/siginfo.h>
-
-typedef struct siginfo {
- int si_signo;
- int si_errno;
- int si_code;
-
- union {
- int _pad[SI_PAD_SIZE];
-
- /* kill() */
- struct {
- __kernel_pid_t _pid; /* sender's pid */
- __kernel_uid_t _uid; /* backwards compatibility */
- __kernel_uid32_t _uid32; /* sender's uid */
- } _kill;
-
- /* POSIX.1b timers */
- struct {
- timer_t _tid; /* timer id */
- int _overrun; /* overrun count */
- char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
- sigval_t _sigval; /* same as below */
- int _sys_private; /* not to be passed to user */
- } _timer;
-
- /* POSIX.1b signals */
- struct {
- __kernel_pid_t _pid; /* sender's pid */
- __kernel_uid_t _uid; /* backwards compatibility */
- sigval_t _sigval;
- __kernel_uid32_t _uid32; /* sender's uid */
- } _rt;
-
- /* SIGCHLD */
- struct {
- __kernel_pid_t _pid; /* which child */
- __kernel_uid_t _uid; /* backwards compatibility */
- int _status; /* exit code */
- clock_t _utime;
- clock_t _stime;
- __kernel_uid32_t _uid32; /* sender's uid */
- } _sigchld;
-
- /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
- struct {
- void *_addr; /* faulting insn/memory ref. */
- } _sigfault;
-
- /* SIGPOLL */
- struct {
- int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
- int _fd;
- } _sigpoll;
- } _sifields;
-} siginfo_t;
-
-#define UID16_SIGINFO_COMPAT_NEEDED
-
-/*
- * How these fields are to be accessed.
- */
-#undef si_uid
-#ifdef __KERNEL__
-#define si_uid _sifields._kill._uid32
-#define si_uid16 _sifields._kill._uid
-#else
-#define si_uid _sifields._kill._uid
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
- if (from->si_code < 0)
- memcpy(to, from, sizeof(*to));
- else
- /* _sigchld is currently the largest know union member */
- memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/arch/m68k/include/asm/siginfo_no.h b/arch/m68k/include/asm/siginfo_no.h
deleted file mode 100644
index b18e5f4..0000000
--- a/arch/m68k/include/asm/siginfo_no.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_SIGINFO_H
-#define _M68KNOMMU_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 3c19988..08788fd 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -1,5 +1,213 @@
-#ifdef __uClinux__
-#include "signal_no.h"
+#ifndef _M68K_SIGNAL_H
+#define _M68K_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
#else
-#include "signal_mm.h"
-#endif
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#ifndef __uClinux__
+#define __HAVE_ARCH_SIG_BITOPS
+
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+ asm ("bfset %0{%1,#1}"
+ : "+od" (*set)
+ : "id" ((_sig - 1) ^ 31)
+ : "cc");
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+ asm ("bfclr %0{%1,#1}"
+ : "+od" (*set)
+ : "id" ((_sig - 1) ^ 31)
+ : "cc");
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+ unsigned long sig = _sig - 1;
+ return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+ int ret;
+ asm ("bfextu %1{%2,#1},%0"
+ : "=d" (ret)
+ : "od" (*set), "id" ((_sig-1) ^ 31)
+ : "cc");
+ return ret;
+}
+
+#define sigismember(set,sig) \
+ (__builtin_constant_p(sig) ? \
+ __const_sigismember(set,sig) : \
+ __gen_sigismember(set,sig))
+
+static inline int sigfindinword(unsigned long word)
+{
+ asm ("bfffo %1{#0,#0},%0"
+ : "=d" (word)
+ : "d" (word & -word)
+ : "cc");
+ return word ^ 31;
+}
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#else
+
+#undef __HAVE_ARCH_SIG_BITOPS
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __uClinux__ */
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/signal_mm.h b/arch/m68k/include/asm/signal_mm.h
deleted file mode 100644
index 3db8a81..0000000
--- a/arch/m68k/include/asm/signal_mm.h
+++ /dev/null
@@ -1,206 +0,0 @@
-#ifndef _M68K_SIGNAL_H
-#define _M68K_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#define __HAVE_ARCH_SIG_BITOPS
-
-static inline void sigaddset(sigset_t *set, int _sig)
-{
- asm ("bfset %0{%1,#1}"
- : "+od" (*set)
- : "id" ((_sig - 1) ^ 31)
- : "cc");
-}
-
-static inline void sigdelset(sigset_t *set, int _sig)
-{
- asm ("bfclr %0{%1,#1}"
- : "+od" (*set)
- : "id" ((_sig - 1) ^ 31)
- : "cc");
-}
-
-static inline int __const_sigismember(sigset_t *set, int _sig)
-{
- unsigned long sig = _sig - 1;
- return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static inline int __gen_sigismember(sigset_t *set, int _sig)
-{
- int ret;
- asm ("bfextu %1{%2,#1},%0"
- : "=d" (ret)
- : "od" (*set), "id" ((_sig-1) ^ 31)
- : "cc");
- return ret;
-}
-
-#define sigismember(set,sig) \
- (__builtin_constant_p(sig) ? \
- __const_sigismember(set,sig) : \
- __gen_sigismember(set,sig))
-
-static inline int sigfindinword(unsigned long word)
-{
- asm ("bfffo %1{#0,#0},%0"
- : "=d" (word)
- : "d" (word & -word)
- : "cc");
- return word ^ 31;
-}
-
-struct pt_regs;
-extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/signal_no.h b/arch/m68k/include/asm/signal_no.h
deleted file mode 100644
index 216c08b..0000000
--- a/arch/m68k/include/asm/signal_no.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef _M68KNOMMU_SIGNAL_H
-#define _M68KNOMMU_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
index 7d7dde1..9e3054e 100644
--- a/arch/m68k/include/asm/swab.h
+++ b/arch/m68k/include/asm/swab.h
@@ -1,5 +1,27 @@
-#ifdef __uClinux__
-#include "swab_no.h"
-#else
-#include "swab_mm.h"
+#ifndef _M68K_SWAB_H
+#define _M68K_SWAB_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+ __asm__("byterev %0" : "=d" (val) : "0" (val));
+ return val;
+}
+
+#define __arch_swab32 __arch_swab32
+#elif !defined(__uClinux__)
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+ __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+ return val;
+}
+#define __arch_swab32 __arch_swab32
#endif
+
+#endif /* _M68K_SWAB_H */
diff --git a/arch/m68k/include/asm/swab_mm.h b/arch/m68k/include/asm/swab_mm.h
deleted file mode 100644
index 7221e30..0000000
--- a/arch/m68k/include/asm/swab_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _M68K_SWAB_H
-#define _M68K_SWAB_H
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
- __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
- return val;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif /* _M68K_SWAB_H */
diff --git a/arch/m68k/include/asm/swab_no.h b/arch/m68k/include/asm/swab_no.h
deleted file mode 100644
index e582257..0000000
--- a/arch/m68k/include/asm/swab_no.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _M68KNOMMU_SWAB_H
-#define _M68KNOMMU_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#if defined (__mcfisaaplus__) || defined (__mcfisac__)
-static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
-{
- asm(
- "byterev %0"
- : "=d" (val)
- : "0" (val)
- );
- return val;
-}
-
-#define __arch_swab32 __arch_swab32
-#endif
-
-#endif /* _M68KNOMMU_SWAB_H */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index df1d9d4..3c19027 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -1,5 +1,372 @@
-#ifdef __uClinux__
-#include "unistd_no.h"
-#else
-#include "unistd_mm.h"
-#endif
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+#define __NR_idle /* 112 */ Obsolete
+#define __NR_vm86 /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+#define __NR_vserver 278
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+#define __NR_signalfd4 323
+#define __NR_eventfd2 324
+#define __NR_epoll_create1 325
+#define __NR_dup3 326
+#define __NR_pipe2 327
+#define __NR_inotify_init1 328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/asm/unistd_mm.h b/arch/m68k/include/asm/unistd_mm.h
deleted file mode 100644
index 3c19027..0000000
--- a/arch/m68k/include/asm/unistd_mm.h
+++ /dev/null
@@ -1,372 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-#define __NR_vserver 278
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-#define __NR_signalfd4 323
-#define __NR_eventfd2 324
-#define __NR_epoll_create1 325
-#define __NR_dup3 326
-#define __NR_pipe2 327
-#define __NR_inotify_init1 328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/asm/unistd_no.h b/arch/m68k/include/asm/unistd_no.h
deleted file mode 100644
index b034a2f..0000000
--- a/arch/m68k/include/asm/unistd_no.h
+++ /dev/null
@@ -1,372 +0,0 @@
-#ifndef _ASM_M68K_UNISTD_H_
-#define _ASM_M68K_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-#define __NR_idle /* 112 */ Obsolete
-#define __NR_vm86 /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-#define __NR_vserver 278
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-#define __NR_signalfd4 323
-#define __NR_eventfd2 324
-#define __NR_epoll_create1 325
-#define __NR_dup3 326
-#define __NR_pipe2 327
-#define __NR_inotify_init1 328
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 329
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index d01a5d2..db90254 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -17,6 +17,7 @@
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
/***************************************************************************/
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index dfdb5c2e..44baeb2 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -24,7 +24,6 @@
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
@@ -33,233 +32,6 @@
/***************************************************************************/
void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 0x02
-#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK 0x18
-
-#define FLASH_BLOCKSIZE (1024*64)
-#define FLASH_NUMBLOCKS 16
-#define FLASH_TYPE "m25p80"
-
-#define M25P80_CS 0
-#define MMC_CS 1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
- /* sflash */
- [0] = {
- .name = "stm25p80",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
- .mask_flags = 0
- }
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS 0x08
-#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK 0x78
-
-#define FLASH_BLOCKSIZE (1024*64)
-#define FLASH_NUMBLOCKS 64
-#define FLASH_TYPE "m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE (1024 * 1024)
-
-#define M25P80_CS 5
-#define MMC_CS 6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
- /* sflash */
- [0] = {
- .name = "kernel",
- .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
- .size = FLASH_KERNEL_SIZE,
- .mask_flags = 0
- },
- [1] = {
- .name = "image",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
- .mask_flags = 0
- },
- [2] = {
- .name = "all",
- .offset = 0x00000000,
- .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
- .mask_flags = 0
- }
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 0x04
-#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 16,
- .del_cs_to_clk = 17,
- .del_after_trans = 1,
- .void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
- .mode = SPI_MODE_0,
- .bits_per_word = 16,
- .del_cs_to_clk = 17,
- .del_after_trans = 1,
- .void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
- .name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = stm25p_partitions,
- .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
- .type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
- {
- .modalias = "m25p80",
- .max_speed_hz = 16000000,
- .bus_num = 1,
- .chip_select = M25P80_CS,
- .platform_data = &stm25p80_platform_data,
- .controller_data = &flash_chip_info
- },
-#endif
-#ifdef MMC_CS
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 16000000,
- .bus_num = 1,
- .chip_select = MMC_CS,
- .controller_data = &mmc_chip_info
- }
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
- .bus_num = 1,
- .num_chipselect = SPI_NUM_CHIPSELECTS,
- .irq_source = MCF5282_QSPI_IRQ_SOURCE,
- .irq_vector = MCF5282_QSPI_IRQ_VECTOR,
- .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
- .irq_lp = 0x2B, /* Level 5 and Priority 3 */
- .par_val = SPI_PAR_VAL,
- .cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
- [0] = {
- .name = "qspi-par",
- .start = MCF5282_QSPI_PAR,
- .end = MCF5282_QSPI_PAR,
- .flags = IORESOURCE_MEM
- },
-
- [1] = {
- .name = "qspi-module",
- .start = MCF5282_QSPI_QMR,
- .end = MCF5282_QSPI_QMR + 0x18,
- .flags = IORESOURCE_MEM
- },
-
- [2] = {
- .name = "qspi-int-level",
- .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
- .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
- .flags = IORESOURCE_MEM
- },
-
- [3] = {
- .name = "qspi-int-mask",
- .start = MCF5282_INTC0 + MCFINTC_IMRL,
- .end = MCF5282_INTC0 + MCFINTC_IMRL,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct platform_device coldfire_spi = {
- .name = "spi_coldfire",
- .id = -1,
- .resource = coldfire_spi_resources,
- .num_resources = ARRAY_SIZE(coldfire_spi_resources),
- .dev = {
- .platform_data = &coldfire_master_info,
- }
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
- u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
- u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
- u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
- /*
- * Don't do anything if the chip select is not
- * one of the port qs pins.
- */
- if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
- MCF5282_GPIO_DDRQS |= cs_bit;
- MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
- MCF5282_GPIO_DDRQS |= SPI_CS_MASK;
- MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
- }
-
- if (command & QSPI_CS_ASSERT) {
- MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
- MCF5282_GPIO_PORTQS |= cs_mask;
- } else if (command & QSPI_CS_DROP) {
- MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
- }
-}
-
-static int __init spi_dev_init(void)
-{
- int retval;
-
- retval = platform_device_register(&coldfire_spi);
- if (retval < 0)
- return retval;
-
- if (ARRAY_SIZE(spi_board_info))
- retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
- return retval;
-}
-
-#endif /* CONFIG_SPI */
/***************************************************************************/
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e61465a..206cb79 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -238,8 +238,12 @@
This option enables support for MIPS Technologies MIPSsim software
emulator.
-config MACH_EMMA
- bool "NEC EMMA series based machines"
+config NEC_MARKEINS
+ bool "NEC EMMA2RH Mark-eins board"
+ select SOC_EMMA2RH
+ select HW_HAS_PCI
+ help
+ This enables support for the NEC Electronics Mark-eins boards.
config MACH_VR41XX
bool "NEC VR4100 series based machines"
@@ -637,7 +641,6 @@
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
-source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
@@ -895,6 +898,18 @@
bool
select SERIAL_RM9000
+config SOC_EMMA2RH
+ bool
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R5500
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+
config SOC_PNX833X
bool
select CEVT_R4K
@@ -930,11 +945,6 @@
config SWAP_IO_SPACE
bool
-config EMMA2RH
- bool
- depends on MARKEINS
- default y
-
config SERIAL_RM9000
bool
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 21b00e9..22dab2e 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -416,7 +416,7 @@
#
# Common NEC EMMAXXX
#
-core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/
+core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/
cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
#
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f2baea3..0208723 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -512,7 +512,7 @@
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
+CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 9d5bd2a..5380f1f 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:01:36 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar 4 23:07:16 2009
#
CONFIG_MIPS=y
@@ -18,8 +18,10 @@
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
@@ -39,7 +41,11 @@
# CONFIG_SNI_RM is not set
CONFIG_MACH_TX39XX=y
# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_JMR3927=y
CONFIG_SOC_TX3927=y
# CONFIG_TOSHIBA_FPCIB0 is not set
@@ -54,12 +60,14 @@
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_TXX9=y
CONFIG_GPIO_TXX9=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
@@ -87,6 +95,7 @@
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -94,6 +103,7 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_TX39XX=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -117,14 +127,12 @@
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -159,6 +167,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
@@ -171,7 +188,6 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
@@ -188,26 +204,23 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -221,7 +234,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -231,12 +244,15 @@
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
CONFIG_MMU=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
@@ -245,15 +261,12 @@
#
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -293,6 +306,7 @@
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -302,14 +316,9 @@
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
@@ -323,7 +332,89 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
@@ -336,6 +427,7 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -361,7 +453,6 @@
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -383,6 +474,9 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -392,6 +486,7 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -399,6 +494,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -406,7 +504,6 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -415,9 +512,11 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -428,6 +527,10 @@
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
@@ -440,27 +543,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -517,10 +600,11 @@
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
@@ -528,6 +612,11 @@
#
#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
@@ -542,6 +631,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
CONFIG_TXX9_WDT=y
#
@@ -549,18 +639,21 @@
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -591,16 +684,26 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
@@ -626,27 +729,34 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -676,28 +786,17 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
@@ -726,7 +825,16 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -734,15 +842,18 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/markeins_defconfig
similarity index 99%
rename from arch/mips/configs/emma2rh_defconfig
rename to arch/mips/configs/markeins_defconfig
index fea9bc9..bad8901 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -35,7 +35,7 @@
# CONFIG_PNX8550_STB810 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
-CONFIG_MARKEINS=y
+CONFIG_NEC_MARKEINS=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
@@ -68,7 +68,7 @@
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_EMMA2RH=y
+CONFIG_SOC_EMMA2RH=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
@@ -574,9 +574,9 @@
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1e000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PLATRAM is not set
#
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 83d5c58..1efe977 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:03:21 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar 4 23:08:06 2009
#
CONFIG_MIPS=y
@@ -18,8 +18,10 @@
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
@@ -39,20 +41,28 @@
# CONFIG_SNI_RM is not set
# CONFIG_MACH_TX39XX is not set
CONFIG_MACH_TX49XX=y
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_RBTX4927=y
CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_TOSHIBA_RBTX4939=y
CONFIG_SOC_TX4927=y
CONFIG_SOC_TX4938=y
+CONFIG_SOC_TX4939=y
+CONFIG_TXX9_7SEGLED=y
# CONFIG_TOSHIBA_FPCIB0 is not set
CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
#
# Multiplex Pin Select
#
-CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
CONFIG_PCI_TX4927=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -64,14 +74,18 @@
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_GPIO_TXX9=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
@@ -100,6 +114,7 @@
CONFIG_CPU_TX49XX=y
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
@@ -107,6 +122,7 @@
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_TX49XX=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
@@ -134,13 +150,12 @@
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@@ -176,6 +191,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -190,7 +214,6 @@
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_HOTPLUG is not set
@@ -207,30 +230,26 @@
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -244,7 +263,8 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -254,12 +274,15 @@
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
CONFIG_MMU=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
@@ -268,15 +291,12 @@
#
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -318,6 +338,7 @@
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -327,14 +348,9 @@
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
@@ -348,7 +364,90 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
@@ -365,9 +464,60 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_TX4938=y
+CONFIG_BLK_DEV_IDE_TX4939=y
+CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
@@ -390,7 +540,6 @@
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -412,15 +561,19 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -429,6 +582,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -436,7 +592,6 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -445,9 +600,11 @@
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -458,6 +615,10 @@
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
@@ -502,6 +663,7 @@
CONFIG_SERIAL_TXX9_STDSERIAL=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
@@ -517,17 +679,19 @@
#
# SPI Master Controller Drivers
#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_TXX9=y
#
# SPI Protocol Masters
#
-CONFIG_EEPROM_AT25=y
# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
@@ -535,8 +699,14 @@
#
#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
@@ -550,6 +720,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
CONFIG_TXX9_WDT=m
#
@@ -557,18 +728,21 @@
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -599,15 +773,27 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
@@ -628,35 +814,47 @@
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_TX4939=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
@@ -687,30 +885,19 @@
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
@@ -740,7 +927,16 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
@@ -748,15 +944,18 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig
deleted file mode 100644
index 9669c72..0000000
--- a/arch/mips/emma/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-choice
- prompt "Machine type"
- depends on MACH_EMMA
- default NEC_MARKEINS
-
-config NEC_MARKEINS
- bool "NEC EMMA2RH Mark-eins board"
- select SOC_EMMA2RH
- select HW_HAS_PCI
- help
- This enables support for the NEC Electronics Mark-eins boards.
-
-endchoice
-
-config SOC_EMMA2RH
- bool
- select SOC_EMMA
- select SYS_HAS_CPU_R5500
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-config SOC_EMMA
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
index 88e87f6..d5f47e4 100644
--- a/arch/mips/emma/markeins/platform.c
+++ b/arch/mips/emma/markeins/platform.c
@@ -141,13 +141,6 @@
},
};
-static struct platform_device *devices[] = {
- &i2c_emma_devices[0],
- &i2c_emma_devices[1],
- &i2c_emma_devices[2],
- &serial_emma,
-};
-
static struct mtd_partition markeins_parts[] = {
[0] = {
.name = "RootFS",
@@ -181,11 +174,39 @@
},
};
+static struct physmap_flash_data markeins_flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(markeins_parts),
+ .parts = markeins_parts
+};
+
+static struct resource markeins_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x02000000,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device markeins_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &markeins_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &markeins_flash_resource,
+};
+
+static struct platform_device *devices[] = {
+ i2c_emma_devices,
+ i2c_emma_devices + 1,
+ i2c_emma_devices + 2,
+ &serial_emma,
+ &markeins_flash_device,
+};
+
static int __init platform_devices_setup(void)
{
- physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
arch_initcall(platform_devices_setup);
-
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index ac5d541..6c5b409 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,6 +3,8 @@
/*
* Architecture specific compatibility types
*/
+#include <linux/seccomp.h>
+#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
#include <asm/ptrace.h>
@@ -218,4 +220,9 @@
compat_ulong_t __unused2;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index 43baed1..134e1fc 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,7 +138,8 @@
__instruction_hazard(); \
} while (0)
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+ defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
index 1785083..a56594f 100644
--- a/arch/mips/include/asm/prefetch.h
+++ b/arch/mips/include/asm/prefetch.h
@@ -26,7 +26,7 @@
* Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
* current versions due to erratum G105.
*
- * VR7701 only implements the Load prefetch.
+ * VR5500 (including VR5701 and VR7701) only implement load prefetch.
*
* Finally MIPS32 and MIPS64 implement all of the following hints.
*/
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
index a6772e9..ae6306e 100644
--- a/arch/mips/include/asm/seccomp.h
+++ b/arch/mips/include/asm/seccomp.h
@@ -15,8 +15,6 @@
*/
#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-
#define __NR_seccomp_read_32 4003
#define __NR_seccomp_write_32 4004
#define __NR_seccomp_exit_32 4001
@@ -24,8 +22,6 @@
#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-
#define __NR_seccomp_read_32 6000
#define __NR_seccomp_write_32 6001
#define __NR_seccomp_exit_32 6058
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 3f76de7..676aa2a 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -127,6 +127,12 @@
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
+#ifdef CONFIG_MIPS32_O32
+#define TIF_32BIT TIF_32BIT_REGS
+#elif defined(CONFIG_MIPS32_N32)
+#define TIF_32BIT _TIF_32BIT_ADDR
+#endif /* CONFIG_MIPS32_O32 */
+
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index a7162a4..1bdbcad 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -149,6 +149,7 @@
case CPU_R4650:
case CPU_R4700:
case CPU_R5000:
+ case CPU_R5500:
case CPU_NEVADA:
case CPU_4KC:
case CPU_4KEC:
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 2f8452b..1a86f84 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -235,7 +235,7 @@
#else
SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
- u32, ptr, u32 fifth)
+ u32, ptr, u32, fifth)
{
return -ENOSYS;
}
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 1417c64..48060c6 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -172,8 +172,9 @@
*/
cache_line_size = cpu_dcache_line_size();
switch (current_cpu_type()) {
+ case CPU_R5500:
case CPU_TX49XX:
- /* TX49 supports only Pref_Load */
+ /* These processors only support the Pref_Load. */
pref_bias_copy_load = 256;
break;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 4294203..f335cf6 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -318,6 +318,7 @@
case CPU_BCM4710:
case CPU_LOONGSON2:
case CPU_CAVIUM_OCTEON:
+ case CPU_R5500:
if (m4kc_tlbp_war())
uasm_i_nop(p);
tlbw(p);
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 9fc96e7..bf34a28 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:00:07 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:55 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -33,17 +33,35 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -55,29 +73,38 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -91,6 +118,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
#
# Processor type and features
@@ -114,17 +142,19 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
@@ -138,10 +168,6 @@
# CONFIG_EISA is not set
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -156,16 +182,15 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -173,6 +198,7 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -203,25 +229,25 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
@@ -230,6 +256,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
@@ -240,28 +267,26 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -276,6 +301,8 @@
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -298,11 +325,19 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -342,14 +377,17 @@
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_ZALON is not set
CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
@@ -362,7 +400,6 @@
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -377,6 +414,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
@@ -387,6 +427,11 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
@@ -401,7 +446,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -423,7 +467,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -446,8 +489,8 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
@@ -474,9 +517,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -501,72 +546,76 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -579,6 +628,14 @@
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -606,15 +663,8 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -630,10 +680,7 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
@@ -641,63 +688,82 @@
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -707,7 +773,7 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
@@ -717,19 +783,18 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -759,16 +824,13 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
@@ -778,35 +840,34 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
@@ -815,6 +876,7 @@
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
@@ -827,10 +889,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -871,33 +929,28 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -909,10 +962,32 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_RODATA=y
#
@@ -921,57 +996,113 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index ddacc72..f12e4b8 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:12:44 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:56 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -34,18 +34,30 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CPUSETS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -57,28 +69,40 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
@@ -93,6 +117,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# Processor type and features
@@ -118,12 +143,12 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
@@ -131,11 +156,12 @@
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
@@ -145,14 +171,13 @@
# CONFIG_GSC is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
@@ -187,16 +212,15 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -204,6 +228,8 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -234,7 +260,6 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
@@ -250,66 +275,72 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
@@ -318,33 +349,30 @@
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
@@ -356,6 +384,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
@@ -366,28 +395,26 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -402,6 +429,8 @@
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -421,14 +450,23 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -468,8 +506,10 @@
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -478,16 +518,21 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -503,9 +548,11 @@
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
@@ -514,10 +561,6 @@
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
@@ -529,20 +572,40 @@
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
@@ -567,33 +630,38 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -601,23 +669,31 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -625,6 +701,11 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
@@ -650,7 +731,6 @@
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -669,7 +749,6 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -693,10 +772,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -721,17 +803,12 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_PARISC=y
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -739,51 +816,66 @@
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -792,50 +884,83 @@
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
# CONFIG_STI_CONSOLE is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -845,7 +970,7 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
@@ -855,19 +980,19 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -897,16 +1022,13 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
@@ -916,34 +1038,33 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
@@ -952,6 +1073,7 @@
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
@@ -964,10 +1086,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1008,33 +1126,28 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1046,10 +1159,33 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_RODATA is not set
#
@@ -1058,56 +1194,112 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 1bf22c9..98bb05e 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:16:46 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:57 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -33,13 +33,29 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -51,27 +67,34 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -85,6 +108,7 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# Processor type and features
@@ -108,13 +132,15 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
@@ -130,14 +156,14 @@
CONFIG_ISA=y
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# PA-RISC specific drivers
@@ -151,16 +177,15 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -205,36 +230,37 @@
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
@@ -247,7 +273,9 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -275,10 +303,18 @@
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=y
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -317,8 +353,10 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -330,12 +368,15 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -346,6 +387,7 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
@@ -360,7 +402,6 @@
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
@@ -373,9 +414,11 @@
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
@@ -383,26 +426,18 @@
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
#
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -434,36 +469,49 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -471,6 +519,11 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
@@ -503,7 +556,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -526,11 +578,12 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
@@ -564,9 +617,11 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -598,75 +653,79 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -691,6 +750,7 @@
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -698,7 +758,16 @@
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -718,15 +787,8 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -742,10 +804,7 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
@@ -753,10 +812,7 @@
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -765,9 +821,11 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@@ -792,6 +850,7 @@
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -809,30 +868,23 @@
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -840,36 +892,63 @@
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -879,19 +958,18 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -917,35 +995,32 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
@@ -962,10 +1037,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1011,7 +1082,9 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1019,9 +1092,12 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1033,10 +1109,29 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_RODATA is not set
#
@@ -1044,52 +1139,108 @@
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index c6def3c..0aa8014 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:24:00 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:58 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -33,16 +33,29 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -54,29 +67,39 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -90,6 +113,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
#
# Processor type and features
@@ -115,17 +139,19 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
@@ -134,14 +160,13 @@
# CONFIG_GSC is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -158,16 +183,15 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -175,6 +199,8 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -204,7 +230,6 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
@@ -220,29 +245,34 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
@@ -251,6 +281,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -260,28 +291,26 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -296,6 +325,8 @@
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -316,59 +347,62 @@
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# EEPROM support
#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
@@ -380,10 +414,7 @@
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -422,8 +453,10 @@
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -433,16 +466,20 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -458,9 +495,11 @@
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
@@ -475,13 +514,8 @@
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
@@ -493,20 +527,40 @@
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
@@ -528,33 +582,38 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -562,23 +621,31 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -586,6 +653,11 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -594,7 +666,6 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -612,7 +683,6 @@
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -634,7 +704,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -652,6 +721,7 @@
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -672,10 +742,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -699,72 +772,77 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -790,6 +868,7 @@
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -798,7 +877,16 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -818,15 +906,8 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -842,20 +923,16 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -864,10 +941,12 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@@ -892,6 +971,7 @@
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -909,47 +989,59 @@
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -958,12 +1050,20 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -971,32 +1071,37 @@
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1004,15 +1109,10 @@
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1021,7 +1121,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
@@ -1037,37 +1137,59 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1077,25 +1199,24 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
@@ -1124,16 +1245,13 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1142,32 +1260,31 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1181,10 +1298,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1225,33 +1338,28 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1263,10 +1371,33 @@
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_RODATA=y
#
@@ -1274,54 +1405,110 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
index 448a757..283a96c 100644
--- a/arch/parisc/configs/default_defconfig
+++ b/arch/parisc/configs/default_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 20:54:57 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:59 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -33,17 +33,35 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -55,29 +73,39 @@
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -91,6 +119,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
#
# Processor type and features
@@ -114,17 +143,19 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
@@ -140,15 +171,14 @@
# CONFIG_ISA is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
@@ -183,16 +213,15 @@
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -200,6 +229,8 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -245,8 +276,10 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -254,6 +287,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
@@ -264,28 +298,26 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -300,6 +332,8 @@
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -330,63 +364,68 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# EEPROM support
#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
@@ -398,10 +437,7 @@
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
@@ -440,8 +476,10 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -452,11 +490,14 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -464,6 +505,7 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_STEX is not set
@@ -487,9 +529,11 @@
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
@@ -505,32 +549,47 @@
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
@@ -550,13 +609,15 @@
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
@@ -564,7 +625,7 @@
# CONFIG_AC3200 is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
@@ -574,19 +635,24 @@
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -594,23 +660,31 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -618,6 +692,11 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -626,7 +705,6 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
@@ -654,7 +732,6 @@
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -676,7 +753,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -699,11 +775,12 @@
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
@@ -729,10 +806,13 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -759,21 +839,16 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -781,60 +856,70 @@
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -860,6 +945,7 @@
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -868,7 +954,16 @@
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -896,15 +991,8 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
@@ -920,11 +1008,9 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
@@ -932,10 +1018,8 @@
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -944,10 +1028,12 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@@ -972,6 +1058,7 @@
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@@ -989,58 +1076,67 @@
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -1049,12 +1145,18 @@
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1062,19 +1164,23 @@
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1084,16 +1190,11 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1102,7 +1203,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1118,38 +1219,60 @@
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1159,21 +1282,20 @@
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1202,16 +1324,13 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
@@ -1221,33 +1340,32 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
@@ -1256,6 +1374,7 @@
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
@@ -1268,10 +1387,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1312,33 +1427,28 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
@@ -1350,10 +1460,33 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_RODATA is not set
#
@@ -1362,56 +1495,112 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index bd9a4db..5cbe9f9 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -137,7 +137,6 @@
error = count - buf.count;
}
-out_putf:
fput(file);
out:
return error;
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index ffb2088..89fb400 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -79,6 +79,7 @@
#include <asm/asm-offsets.h>
#include <asm/page.h>
+#include <asm/types.h>
#include <asm/asmregs.h>
@@ -129,27 +130,27 @@
/* Shift Left - note the r and t can NOT be the same! */
.macro shl r, sa, t
- dep,z \r, 31-\sa, 32-\sa, \t
+ dep,z \r, 31-(\sa), 32-(\sa), \t
.endm
/* The PA 2.0 shift left */
.macro shlw r, sa, t
- depw,z \r, 31-\sa, 32-\sa, \t
+ depw,z \r, 31-(\sa), 32-(\sa), \t
.endm
/* And the PA 2.0W shift left */
.macro shld r, sa, t
- depd,z \r, 63-\sa, 64-\sa, \t
+ depd,z \r, 63-(\sa), 64-(\sa), \t
.endm
/* Shift Right - note the r and t can NOT be the same! */
.macro shr r, sa, t
- extru \r, 31-\sa, 32-\sa, \t
+ extru \r, 31-(\sa), 32-(\sa), \t
.endm
/* pa20w version of shift right */
.macro shrd r, sa, t
- extrd,u \r, 63-\sa, 64-\sa, \t
+ extrd,u \r, 63-(\sa), 64-(\sa), \t
.endm
/* load 32-bit 'value' into 'reg' compensating for the ldil
diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h
index d3031d1..1f6d2ae 100644
--- a/arch/parisc/include/asm/io.h
+++ b/arch/parisc/include/asm/io.h
@@ -174,15 +174,48 @@
*(volatile unsigned long long __force *) addr = b;
}
-/* readb can never be const, so use __fswab instead of le*_to_cpu */
-#define readb(addr) __raw_readb(addr)
-#define readw(addr) le16_to_cpu(__raw_readw(addr))
-#define readl(addr) le32_to_cpu(__raw_readl(addr))
-#define readq(addr) le64_to_cpu(__raw_readq(addr))
-#define writeb(b, addr) __raw_writeb(b, addr)
-#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
-#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+ return __raw_readb(addr);
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+ return le16_to_cpu(__raw_readw(addr));
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+ return le32_to_cpu(__raw_readl(addr));
+}
+static inline unsigned long long readq(const volatile void __iomem *addr)
+{
+ return le64_to_cpu(__raw_readq(addr));
+}
+
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+ __raw_writeb(b, addr);
+}
+static inline void writew(unsigned short w, volatile void __iomem *addr)
+{
+ __raw_writew(cpu_to_le16(w), addr);
+}
+static inline void writel(unsigned int l, volatile void __iomem *addr)
+{
+ __raw_writel(cpu_to_le32(l), addr);
+}
+static inline void writeq(unsigned long long q, volatile void __iomem *addr)
+{
+ __raw_writeq(cpu_to_le64(q), addr);
+}
+
+#define readb readb
+#define readw readw
+#define readl readl
+#define readq readq
+#define writeb writeb
+#define writew writew
+#define writel writel
+#define writeq writeq
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h
index 399c819..dfa26b6 100644
--- a/arch/parisc/include/asm/irq.h
+++ b/arch/parisc/include/asm/irq.h
@@ -49,7 +49,7 @@
extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *);
-extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
+extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest);
/* soft power switch support (power.c) */
extern struct tasklet_struct power_tasklet;
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 1c6dbb6..cd4c0b2 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -241,6 +241,7 @@
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
+struct pt_regs;
int fixup_exception(struct pt_regs *regs);
#endif /* __PARISC_UACCESS_H */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 5259d8c..837530e 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -551,10 +551,7 @@
{
int sr3;
- if (!vma->vm_mm->context) {
- BUG();
- return;
- }
+ BUG_ON(!vma->vm_mm->context);
sr3 = mfsp(3);
if (vma->vm_mm->context == sr3) {
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index d1fa4ed..0db9fdc 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -368,7 +368,7 @@
* abstractions for the macros */
.macro EXTR reg1,start,length,reg2
#ifdef CONFIG_64BIT
- extrd,u \reg1,32+\start,\length,\reg2
+ extrd,u \reg1,32+(\start),\length,\reg2
#else
extrw,u \reg1,\start,\length,\reg2
#endif
@@ -376,7 +376,7 @@
.macro DEP reg1,start,length,reg2
#ifdef CONFIG_64BIT
- depd \reg1,32+\start,\length,\reg2
+ depd \reg1,32+(\start),\length,\reg2
#else
depw \reg1,\start,\length,\reg2
#endif
@@ -384,7 +384,7 @@
.macro DEPI val,start,length,reg
#ifdef CONFIG_64BIT
- depdi \val,32+\start,\length,\reg
+ depdi \val,32+(\start),\length,\reg
#else
depwi \val,\start,\length,\reg
#endif
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 03f26bd..f6d2412 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -151,7 +151,7 @@
}
#ifdef CONFIG_64BIT
-void __init set_firmware_width_unlocked(void)
+void __cpuinit set_firmware_width_unlocked(void)
{
int ret;
@@ -168,7 +168,7 @@
* This function must be called before any pdc_* function that uses the
* convert_to_wide function.
*/
-void __init set_firmware_width(void)
+void __cpuinit set_firmware_width(void)
{
unsigned long flags;
spin_lock_irqsave(&pdc_lock, flags);
@@ -176,11 +176,11 @@
spin_unlock_irqrestore(&pdc_lock, flags);
}
#else
-void __init set_firmware_width_unlocked(void) {
+void __cpuinit set_firmware_width_unlocked(void) {
return;
}
-void __init set_firmware_width(void) {
+void __cpuinit set_firmware_width(void) {
return;
}
#endif /*CONFIG_64BIT*/
@@ -302,7 +302,7 @@
return retval;
}
-int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
{
int ret;
@@ -323,7 +323,7 @@
* This PDC call returns the presence and status of all the coprocessors
* attached to the processor.
*/
-int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
{
int ret;
unsigned long flags;
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index ac2c822..29e70e1 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -112,7 +112,7 @@
}
#ifdef CONFIG_SMP
-int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu_dest;
@@ -120,23 +120,25 @@
if (CHECK_IRQ_PER_CPU(irq)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
- irq_desc[irq].affinity = CPU_MASK_ALL;
+ cpumask_setall(&irq_desc[irq].affinity);
return -EINVAL;
}
/* whatever mask they set, we just allow one CPU */
cpu_dest = first_cpu(*dest);
- *dest = cpumask_of_cpu(cpu_dest);
- return 0;
+ return cpu_dest;
}
static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
{
- if (cpu_check_affinity(irq, dest))
+ int cpu_dest;
+
+ cpu_dest = cpu_check_affinity(irq, dest);
+ if (cpu_dest < 0)
return;
- irq_desc[irq].affinity = *dest;
+ cpumask_copy(&irq_desc[irq].affinity, &cpumask_of_cpu(cpu_dest));
}
#endif
@@ -295,7 +297,7 @@
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
{
#ifdef CONFIG_SMP
- irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+ cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
@@ -352,7 +354,7 @@
irq = eirr_to_irq(eirr_val);
#ifdef CONFIG_SMP
- dest = irq_desc[irq].affinity;
+ cpumask_copy(&dest, &irq_desc[irq].affinity);
if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
!cpu_isset(smp_processor_id(), dest)) {
int cpu = first_cpu(dest);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index df47895..7d927ea 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -447,10 +447,7 @@
static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE) {
- printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
- BUG();
- }
+ BUG_ON(direction == DMA_NONE);
flush_kernel_dcache_range((unsigned long) addr, size);
return virt_to_phys(addr);
@@ -458,10 +455,7 @@
static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE) {
- printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
- BUG();
- }
+ BUG_ON(direction == DMA_NONE);
if (direction == DMA_TO_DEVICE)
return;
@@ -480,8 +474,7 @@
{
int i;
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
for (i = 0; i < nents; i++, sglist++ ) {
unsigned long vaddr = sg_virt_addr(sglist);
@@ -496,8 +489,7 @@
{
int i;
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
if (direction == DMA_TO_DEVICE)
return;
@@ -511,16 +503,14 @@
static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
}
static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
}
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 7c155c2..9d704d9 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -304,10 +304,8 @@
*/
max_low_pfn = max_pfn;
- if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) {
- printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n");
- BUG();
- }
+ /* bootmap sizing messed up? */
+ BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
/* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index b688838..f5698f9 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -686,7 +686,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 15aab1c..1bf0a63 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -691,7 +691,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index aa5855a..15900dc 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:29 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar 6 00:07:38 2009
#
# CONFIG_PPC64 is not set
@@ -71,6 +71,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -88,6 +97,7 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -153,11 +163,6 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -294,7 +299,6 @@
#
# Networking options
#
-# CONFIG_NET_NS is not set
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
@@ -508,8 +512,8 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
@@ -587,7 +591,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -617,13 +620,19 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -839,6 +848,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -1037,8 +1047,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index b6eee7c..ac14f52 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Wed Aug 20 08:16:53 2008
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 09:28:45 2009
#
CONFIG_PPC64=y
@@ -16,13 +16,14 @@
CONFIG_ALTIVEC=y
# CONFIG_VSX is not set
CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -46,7 +47,7 @@
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
@@ -74,10 +75,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -86,11 +96,13 @@
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
@@ -99,37 +111,36 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,7 +148,6 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
@@ -157,7 +167,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
@@ -183,18 +193,20 @@
CONFIG_PS3_DISK=y
CONFIG_PS3_ROM=y
CONFIG_PS3_FLASH=y
-CONFIG_OPROFILE_PS3=y
+CONFIG_PS3_VRAM=m
CONFIG_PS3_LPM=m
CONFIG_PPC_CELL=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_CELLEB is not set
+# CONFIG_PPC_CELL_QPACE is not set
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=y
CONFIG_SPU_FS_64K_LS=y
+# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
# CONFIG_IPIC is not set
@@ -210,6 +222,7 @@
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
@@ -229,6 +242,8 @@
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
@@ -251,7 +266,6 @@
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
@@ -261,11 +275,14 @@
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
@@ -299,6 +316,7 @@
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -361,6 +379,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -371,6 +390,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -392,39 +412,37 @@
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -450,6 +468,7 @@
CONFIG_MTD_DEBUG_VERBOSE=0
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
@@ -494,7 +513,6 @@
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_PS3VRAM=y
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
@@ -508,6 +526,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -528,8 +551,13 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -575,7 +603,17 @@
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
@@ -591,6 +629,9 @@
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
@@ -604,6 +645,7 @@
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
@@ -615,13 +657,11 @@
# CONFIG_B43LEGACY is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
-CONFIG_RT2X00=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-# CONFIG_RT2500USB is not set
-CONFIG_RT73USB=m
-# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -634,6 +674,7 @@
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
@@ -664,7 +705,7 @@
# Input device support
#
CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
@@ -735,8 +776,10 @@
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
@@ -753,11 +796,11 @@
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -767,6 +810,7 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -792,6 +836,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
@@ -817,6 +862,8 @@
CONFIG_FB_PS3=y
CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -841,6 +888,7 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -849,6 +897,7 @@
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
@@ -873,15 +922,40 @@
# USB Input Devices
#
CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -898,7 +972,11 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -909,6 +987,7 @@
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
@@ -918,6 +997,7 @@
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
@@ -929,20 +1009,20 @@
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -950,7 +1030,6 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -971,6 +1050,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -988,7 +1068,12 @@
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1014,12 +1099,15 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1028,6 +1116,7 @@
CONFIG_RTC_DRV_PPC=m
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1035,26 +1124,35 @@
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
@@ -1087,16 +1185,14 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1106,6 +1202,7 @@
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1126,6 +1223,7 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1190,9 +1288,9 @@
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
@@ -1250,27 +1348,44 @@
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_VIRQ_DEBUG is not set
@@ -1282,16 +1397,26 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1363,6 +1488,11 @@
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 86512c8..9490346 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:46 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar 6 00:09:08 2009
#
# CONFIG_PPC64 is not set
@@ -71,6 +71,15 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -144,11 +153,6 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -377,8 +381,8 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
@@ -452,7 +456,6 @@
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -478,13 +481,19 @@
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -677,6 +686,7 @@
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -818,8 +828,6 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
@@ -1159,6 +1167,7 @@
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_EXPORTFS=m
#
# Partition Types
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 4911104..21172ba 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -241,9 +241,11 @@
/* We need to mark all pages as being coherent if we're SMP or we have a
* 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
* require it for PCI "streaming/prefetch" to work properly.
+ * This is also required by 52xx family.
*/
#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
- || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
+ || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) \
+ || defined(CONFIG_PPC_MPC52xx)
#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT
#else
#define CPU_FTR_COMMON 0
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index a1c4cfd..d794a63 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -511,8 +511,11 @@
and r1,r1,r2 /* writable if _RW and _DIRTY */
rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
- ori r1,r1,0xe14 /* clear out reserved bits and M */
+ ori r1,r1,0xe04 /* clear out reserved bits */
andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+ rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
mfspr r3,SPRN_IMISS
tlbli r3
@@ -585,8 +588,11 @@
and r1,r1,r2 /* writable if _RW and _DIRTY */
rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
- ori r1,r1,0xe14 /* clear out reserved bits and M */
+ ori r1,r1,0xe04 /* clear out reserved bits */
andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+ rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
mfspr r3,SPRN_DMISS
tlbld r3
@@ -653,8 +659,11 @@
stw r3,0(r2) /* update PTE (accessed/dirty bits) */
/* Convert linux-style PTE to low word of PPC-style PTE */
rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
- li r1,0xe15 /* clear out reserved bits and M */
+ li r1,0xe05 /* clear out reserved bits & PP lsb */
andc r1,r3,r1 /* PP = user? 2: 0 */
+BEGIN_FTR_SECTION
+ rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
mtspr SPRN_RPA,r1
mfspr r3,SPRN_DMISS
tlbld r3
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 2ca7be6..244f997 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -12,7 +12,6 @@
#include <linux/kernel.h>
#include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/time.h>
@@ -22,39 +21,6 @@
#include "mpc10x.h"
-static struct mtd_partition linkstation_physmap_partitions[] = {
- {
- .name = "mtd_firmimg",
- .offset = 0x000000,
- .size = 0x300000,
- },
- {
- .name = "mtd_bootcode",
- .offset = 0x300000,
- .size = 0x070000,
- },
- {
- .name = "mtd_status",
- .offset = 0x370000,
- .size = 0x010000,
- },
- {
- .name = "mtd_conf",
- .offset = 0x380000,
- .size = 0x080000,
- },
- {
- .name = "mtd_allflash",
- .offset = 0x000000,
- .size = 0x400000,
- },
- {
- .name = "mtd_data",
- .offset = 0x310000,
- .size = 0x0f0000,
- },
-};
-
static __initdata struct of_device_id of_bus_ids[] = {
{ .type = "soc", },
{ .compatible = "simple-bus", },
@@ -99,10 +65,6 @@
static void __init linkstation_setup_arch(void)
{
struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
- physmap_set_partitions(linkstation_physmap_partitions,
- ARRAY_SIZE(linkstation_physmap_partitions));
-#endif
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 8864e48..613070e 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/system.h>
@@ -26,32 +25,6 @@
#include "mpc10x.h"
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition storcenter_physmap_partitions[] = {
- {
- .name = "kernel",
- .offset = 0x000000,
- .size = 0x170000,
- },
- {
- .name = "rootfs",
- .offset = 0x170000,
- .size = 0x590000,
- },
- {
- .name = "uboot",
- .offset = 0x700000,
- .size = 0x040000,
- },
- {
- .name = "config",
- .offset = 0x740000,
- .size = 0x0c0000,
- },
-};
-#endif
-
-
static __initdata struct of_device_id storcenter_of_bus[] = {
{ .name = "soc", },
{},
@@ -96,11 +69,6 @@
{
struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
- physmap_set_partitions(storcenter_physmap_partitions,
- ARRAY_SIZE(storcenter_physmap_partitions));
-#endif
-
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
storcenter_add_bridge(np);
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 920cf7a..740ef56 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -128,6 +128,13 @@
be disabled on the kernel command line using "ps3flash=off", to
not allocate this fixed buffer.
+config PS3_VRAM
+ tristate "PS3 Video RAM Storage Driver"
+ depends on FB_PS3=y && BLOCK && m
+ help
+ This driver allows you to use excess PS3 video RAM as volatile
+ storage or system swap.
+
config PS3_LPM
tristate "PS3 Logical Performance Monitor support"
depends on PPC_PS3
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
index 7839767..da01432 100644
--- a/arch/s390/include/asm/mman.h
+++ b/arch/s390/include/asm/mman.h
@@ -22,4 +22,9 @@
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__) && defined(CONFIG_64BIT)
+int s390_mmap_check(unsigned long addr, unsigned long len);
+#define arch_mmap_check(addr,len,flags) s390_mmap_check(addr,len)
+#endif
+
#endif /* __S390_MMAN_H__ */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 066b995..db4523f 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -61,7 +61,7 @@
extern int get_cpu_capability(unsigned int *);
/*
- * User space process size: 2GB for 31 bit, 4TB for 64 bit.
+ * User space process size: 2GB for 31 bit, 4TB or 8PT for 64 bit.
*/
#ifndef __s390x__
@@ -70,8 +70,7 @@
#else /* __s390x__ */
-#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk,TIF_31BIT) ? \
- (1UL << 31) : (1UL << 53))
+#define TASK_SIZE_OF(tsk) ((tsk)->mm->context.asce_limit)
#define TASK_UNMAPPED_BASE (test_thread_flag(TIF_31BIT) ? \
(1UL << 30) : (1UL << 41))
#define TASK_SIZE TASK_SIZE_OF(current)
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index c93eb50..c979c3b 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -30,6 +30,8 @@
};
#endif
+#define SD_MC_INIT SD_CPU_INIT
+
#include <asm-generic/topology.h>
#endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 397d131..8064122 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -5,6 +5,8 @@
*
*/
+#include <asm/asm-offsets.h>
+
#ifndef CONFIG_64BIT
.globl _mcount
_mcount:
@@ -14,7 +16,7 @@
ahi %r15,-96
l %r3,100(%r15)
la %r2,0(%r14)
- st %r1,0(%r15)
+ st %r1,__SF_BACKCHAIN(%r15)
la %r3,0(%r3)
bras %r14,0f
.long ftrace_trace_function
@@ -38,7 +40,7 @@
stg %r14,112(%r15)
lgr %r1,%r15
aghi %r15,-160
- stg %r1,0(%r15)
+ stg %r1,__SF_BACKCHAIN(%r15)
lgr %r2,%r14
lg %r3,168(%r15)
larl %r14,ftrace_trace_function
diff --git a/arch/s390/lib/div64.c b/arch/s390/lib/div64.c
index a5f8300..d9e62c0 100644
--- a/arch/s390/lib/div64.c
+++ b/arch/s390/lib/div64.c
@@ -61,7 +61,7 @@
" clr %0,%3\n"
" jl 0f\n"
" slr %0,%3\n"
- " alr %1,%2\n"
+ " ahi %1,1\n"
"0:\n"
: "+d" (reg2), "+d" (reg3), "=d" (tmp)
: "d" (base), "2" (1UL) : "cc" );
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index d66215b..b0b84c3 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -119,8 +119,6 @@
goto fault;
pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn))
- goto out;
offset = uaddr & (PAGE_SIZE - 1);
size = min(n - done, PAGE_SIZE - offset);
@@ -135,7 +133,6 @@
done += size;
uaddr += size;
} while (done < n);
-out:
spin_unlock(&mm->page_table_lock);
return n - done;
fault:
@@ -163,9 +160,6 @@
goto fault;
pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn))
- goto out;
-
ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
out:
return ret;
@@ -244,11 +238,6 @@
goto fault;
pfn = pte_pfn(*pte);
- if (!pfn_valid(pfn)) {
- done = -1;
- goto out;
- }
-
offset = uaddr & (PAGE_SIZE-1);
addr = (char *)(pfn << PAGE_SHIFT) + offset;
len = min(count - done, PAGE_SIZE - offset);
@@ -256,7 +245,6 @@
done += len_str;
uaddr += len_str;
} while ((len_str == len) && (done < count));
-out:
spin_unlock(&mm->page_table_lock);
return done + 1;
fault:
@@ -325,12 +313,7 @@
}
pfn_from = pte_pfn(*pte_from);
- if (!pfn_valid(pfn_from))
- goto out;
pfn_to = pte_pfn(*pte_to);
- if (!pfn_valid(pfn_to))
- goto out;
-
offset_from = uaddr_from & (PAGE_SIZE-1);
offset_to = uaddr_from & (PAGE_SIZE-1);
offset_max = max(offset_from, offset_to);
@@ -342,7 +325,6 @@
uaddr_from += size;
uaddr_to += size;
} while (done < n);
-out:
spin_unlock(&mm->page_table_lock);
return n - done;
fault:
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 5932a82..e008d23 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -35,7 +35,7 @@
* Leave an at least ~128 MB hole.
*/
#define MIN_GAP (128*1024*1024)
-#define MAX_GAP (TASK_SIZE/6*5)
+#define MAX_GAP (STACK_TOP/6*5)
static inline unsigned long mmap_base(void)
{
@@ -46,7 +46,7 @@
else if (gap > MAX_GAP)
gap = MAX_GAP;
- return TASK_SIZE - (gap & PAGE_MASK);
+ return STACK_TOP - (gap & PAGE_MASK);
}
static inline int mmap_is_legacy(void)
@@ -89,42 +89,58 @@
#else
+int s390_mmap_check(unsigned long addr, unsigned long len)
+{
+ if (!test_thread_flag(TIF_31BIT) &&
+ len >= TASK_SIZE && TASK_SIZE < (1UL << 53))
+ return crst_table_upgrade(current->mm, 1UL << 53);
+ return 0;
+}
+
static unsigned long
s390_get_unmapped_area(struct file *filp, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
{
struct mm_struct *mm = current->mm;
+ unsigned long area;
int rc;
- addr = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
- if (addr & ~PAGE_MASK)
- return addr;
- if (unlikely(mm->context.asce_limit < addr + len)) {
- rc = crst_table_upgrade(mm, addr + len);
+ area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
+ if (!(area & ~PAGE_MASK))
+ return area;
+ if (area == -ENOMEM &&
+ !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+ /* Upgrade the page table to 4 levels and retry. */
+ rc = crst_table_upgrade(mm, 1UL << 53);
if (rc)
return (unsigned long) rc;
+ area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
}
- return addr;
+ return area;
}
static unsigned long
-s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
const unsigned long len, const unsigned long pgoff,
const unsigned long flags)
{
struct mm_struct *mm = current->mm;
- unsigned long addr = addr0;
+ unsigned long area;
int rc;
- addr = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
- if (addr & ~PAGE_MASK)
- return addr;
- if (unlikely(mm->context.asce_limit < addr + len)) {
- rc = crst_table_upgrade(mm, addr + len);
+ area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
+ if (!(area & ~PAGE_MASK))
+ return area;
+ if (area == -ENOMEM &&
+ !test_thread_flag(TIF_31BIT) && TASK_SIZE < (1UL << 53)) {
+ /* Upgrade the page table to 4 levels and retry. */
+ rc = crst_table_upgrade(mm, 1UL << 53);
if (rc)
return (unsigned long) rc;
+ area = arch_get_unmapped_area_topdown(filp, addr, len,
+ pgoff, flags);
}
- return addr;
+ return area;
}
/*
* This function, called very early during the creation of a new
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 0767827..6b6ddc4 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -117,6 +117,7 @@
crst_table_init(table, entry);
pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
mm->pgd = (pgd_t *) table;
+ mm->task_size = mm->context.asce_limit;
table = NULL;
}
spin_unlock(&mm->page_table_lock);
@@ -154,6 +155,7 @@
BUG();
}
mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
+ mm->task_size = mm->context.asce_limit;
crst_table_free(mm, (unsigned long *) pgd);
}
update_mm(mm, current);
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 72da416..15b6d45 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -22,6 +22,7 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
+#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
index 32a7efe..2669370 100644
--- a/arch/sparc/include/asm/pil.h
+++ b/arch/sparc/include/asm/pil.h
@@ -24,6 +24,7 @@
#define PIL_DEVICE_IRQ 5
#define PIL_SMP_CALL_FUNC_SNGL 6
#define PIL_DEFERRED_PCR_WORK 7
+#define PIL_KGDB_CAPTURE 8
#define PIL_NORMAL_MAX 14
#define PIL_NMI 15
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index e289376..1c378d8 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -323,17 +323,25 @@
sun4u_irq_enable(virt_irq);
}
+/* Don't do anything. The desc->status check for IRQ_DISABLED in
+ * handler_irq() will skip the handler call and that will leave the
+ * interrupt in the sent state. The next ->enable() call will hit the
+ * ICLR register to reset the state machine.
+ *
+ * This scheme is necessary, instead of clearing the Valid bit in the
+ * IMAP register, to handle the case of IMAP registers being shared by
+ * multiple INOs (and thus ICLR registers). Since we use a different
+ * virtual IRQ for each shared IMAP instance, the generic code thinks
+ * there is only one user so it prematurely calls ->disable() on
+ * free_irq().
+ *
+ * We have to provide an explicit ->disable() method instead of using
+ * NULL to get the default. The reason is that if the generic code
+ * sees that, it also hooks up a default ->shutdown method which
+ * invokes ->mask() which we do not want. See irq_chip_set_defaults().
+ */
static void sun4u_irq_disable(unsigned int virt_irq)
{
- struct irq_handler_data *data = get_irq_chip_data(virt_irq);
-
- if (likely(data)) {
- unsigned long imap = data->imap;
- unsigned long tmp = upa_readq(imap);
-
- tmp &= ~IMAP_VALID;
- upa_writeq(tmp, imap);
- }
}
static void sun4u_irq_eoi(unsigned int virt_irq)
@@ -746,7 +754,8 @@
desc = irq_desc + virt_irq;
- desc->handle_irq(virt_irq, desc);
+ if (!(desc->status & IRQ_DISABLED))
+ desc->handle_irq(virt_irq, desc);
bucket_pa = next_pa;
}
diff --git a/arch/sparc/kernel/kgdb_64.c b/arch/sparc/kernel/kgdb_64.c
index fefbe6d..f5a0fd4 100644
--- a/arch/sparc/kernel/kgdb_64.c
+++ b/arch/sparc/kernel/kgdb_64.c
@@ -108,7 +108,7 @@
}
#ifdef CONFIG_SMP
-void smp_kgdb_capture_client(struct pt_regs *regs)
+void smp_kgdb_capture_client(int irq, struct pt_regs *regs)
{
unsigned long flags;
diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c
index 64e6edf..b775658 100644
--- a/arch/sparc/kernel/pci_common.c
+++ b/arch/sparc/kernel/pci_common.c
@@ -368,7 +368,7 @@
const u32 *vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
if (vdma) {
- struct resource *rp = kmalloc(sizeof(*rp), GFP_KERNEL);
+ struct resource *rp = kzalloc(sizeof(*rp), GFP_KERNEL);
if (!rp) {
prom_printf("Cannot allocate IOMMU resource.\n");
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index d9bdfb9..76d837f 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,12 @@
tl0_irq6: BTRAP(0x46)
#endif
tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7)
-tl0_irq8: BTRAP(0x48) BTRAP(0x49)
+#ifdef CONFIG_KGDB
+tl0_irq8: TRAP_IRQ(smp_kgdb_capture_client, 8)
+#else
+tl0_irq8: BTRAP(0x48)
+#endif
+tl0_irq9: BTRAP(0x49)
tl0_irq10: BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
tl0_irq14: TRAP_IRQ(timer_interrupt, 14)
tl0_irq15: TRAP_NMI_IRQ(perfctr_irq, 15)
diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S
index 80c788e..b57a594 100644
--- a/arch/sparc/mm/ultra.S
+++ b/arch/sparc/mm/ultra.S
@@ -679,28 +679,8 @@
#ifdef CONFIG_KGDB
.globl xcall_kgdb_capture
xcall_kgdb_capture:
-661: rdpr %pstate, %g2
- wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
- .section .sun4v_2insn_patch, "ax"
- .word 661b
- nop
- nop
- .previous
-
- rdpr %pil, %g2
- wrpr %g0, PIL_NORMAL_MAX, %pil
- sethi %hi(109f), %g7
- ba,pt %xcc, etrap_irq
-109: or %g7, %lo(109b), %g7
-#ifdef CONFIG_TRACE_IRQFLAGS
- call trace_hardirqs_off
- nop
-#endif
- call smp_kgdb_capture_client
- add %sp, PTREGS_OFF, %o0
- /* Has to be a non-v9 branch due to the large distance. */
- ba rtrap_xcall
- ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
+ wr %g0, (1 << PIL_KGDB_CAPTURE), %set_softint
+ retry
#endif
#endif /* CONFIG_SMP */
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 15e8b7c..8e3d69e 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -64,6 +64,11 @@
ret = poke_user(child, addr, data);
break;
+ case PTRACE_SYSEMU:
+ case PTRACE_SYSEMU_SINGLESTEP:
+ ret = -EIO;
+ break;
+
/* continue and stop at next (return from) syscall */
case PTRACE_SYSCALL:
/* restart after signal. */
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 74f49bb..89b48a1 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -14,7 +14,6 @@
#undef memset
extern size_t strlen(const char *);
-extern void *memcpy(void *, const void *, size_t);
extern void *memmove(void *, const void *, size_t);
extern void *memset(void *, int, size_t);
extern int printf(const char *, ...);
@@ -24,7 +23,11 @@
EXPORT_SYMBOL(strstr);
#endif
+#ifndef __x86_64__
+extern void *memcpy(void *, const void *, size_t);
EXPORT_SYMBOL(memcpy);
+#endif
+
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(printf);
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index ca5ffb2..edc90f2 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -37,8 +37,6 @@
#else /* !CONFIG_X86_32 */
-#define MAX_EFI_IO_PAGES 100
-
extern u64 efi_call0(void *fp);
extern u64 efi_call1(void *fp, u64 arg1);
extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 00a30ab9..8be7409 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -16,7 +16,6 @@
#include <asm/apicdef.h>
#include <asm/page.h>
#include <asm/vsyscall.h>
-#include <asm/efi.h>
/*
* Here we define all the compile-time 'special' virtual
@@ -43,9 +42,6 @@
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
- FIX_EFI_IO_MAP_LAST_PAGE,
- FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
- + MAX_EFI_IO_PAGES - 1,
#ifdef CONFIG_PARAVIRT
FIX_PARAVIRT_BOOTMAP,
#endif
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 48f0004..71c9e51 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -172,7 +172,13 @@
#else /* CONFIG_X86_32 */
-extern void finit(void);
+#ifdef CONFIG_MATH_EMULATION
+extern void finit_task(struct task_struct *tsk);
+#else
+static inline void finit_task(struct task_struct *tsk)
+{
+}
+#endif
static inline void tolerant_fwait(void)
{
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index b585e04c..3178c3a 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -277,7 +277,6 @@
.name = "p4-clockmod",
.owner = THIS_MODULE,
.attr = p4clockmod_attr,
- .hide_interface = 1,
};
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 169a120..87b67e3 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -729,7 +729,7 @@
spin_unlock_irqrestore(&ds_lock, irq);
- ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+ ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
ds_resume_pebs(tracer);
return tracer;
@@ -1029,5 +1029,4 @@
void ds_exit_thread(struct task_struct *tsk)
{
- WARN_ON(tsk->thread.ds_ctx);
}
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 1119d24..eb1ef3b 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -467,7 +467,7 @@
efi_memory_desc_t *md;
efi_status_t status;
unsigned long size;
- u64 end, systab, addr, npages;
+ u64 end, systab, addr, npages, end_pfn;
void *p, *va;
efi.systab = NULL;
@@ -479,7 +479,10 @@
size = md->num_pages << EFI_PAGE_SHIFT;
end = md->phys_addr + size;
- if (PFN_UP(end) <= max_low_pfn_mapped)
+ end_pfn = PFN_UP(end);
+ if (end_pfn <= max_low_pfn_mapped
+ || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+ && end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
else
va = efi_ioremap(md->phys_addr, size);
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 652c528..cb783b9 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -99,24 +99,11 @@
void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
{
- static unsigned pages_mapped __initdata;
- unsigned i, pages;
- unsigned long offset;
+ unsigned long last_map_pfn;
- pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
-
- if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+ last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+ if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
return NULL;
- for (i = 0; i < pages; i++) {
- __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
- phys_addr, PAGE_KERNEL);
- phys_addr += PAGE_SIZE;
- pages_mapped++;
- }
-
- return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
- (pages_mapped - pages)) + offset;
+ return (void __iomem *)__va(phys_addr);
}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index b0f61f0..f2f8540 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -136,7 +136,7 @@
#ifdef CONFIG_X86_32
if (!HAVE_HWFP) {
memset(tsk->thread.xstate, 0, xstate_size);
- finit();
+ finit_task(tsk);
set_stopped_child_used_math(tsk);
return 0;
}
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index e948b28..4558dd3 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -193,6 +193,9 @@
kprobe_opcode_t opcode;
kprobe_opcode_t *orig_opcodes = opcodes;
+ if (search_exception_tables(opcodes))
+ return 0; /* Page fault may occur on this address. */
+
retry:
if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
return 0;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2b46eb4..4526b3a 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -217,6 +217,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
},
},
+ { /* Handle problems with rebooting on Dell XPS710 */
+ .callback = set_bios_reboot,
+ .ident = "Dell XPS710",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c461f6d..6a8811a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -770,6 +770,9 @@
finish_e820_parsing();
+ if (efi_enabled)
+ efi_init();
+
dmi_scan_machine();
dmi_check_system(bad_bios_dmi_table);
@@ -789,8 +792,6 @@
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
- if (efi_enabled)
- efi_init();
#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 599e581..d5cebb5 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -273,30 +273,43 @@
* use the TSC value at the transitions to calculate a pretty
* good value for the TSC frequencty.
*/
-static inline int pit_expect_msb(unsigned char val)
+static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
{
- int count = 0;
+ int count;
+ u64 tsc = 0;
for (count = 0; count < 50000; count++) {
/* Ignore LSB */
inb(0x42);
if (inb(0x42) != val)
break;
+ tsc = get_cycles();
}
- return count > 50;
+ *deltap = get_cycles() - tsc;
+ *tscp = tsc;
+
+ /*
+ * We require _some_ success, but the quality control
+ * will be based on the error terms on the TSC values.
+ */
+ return count > 5;
}
/*
- * How many MSB values do we want to see? We aim for a
- * 15ms calibration, which assuming a 2us counter read
- * error should give us roughly 150 ppm precision for
- * the calibration.
+ * How many MSB values do we want to see? We aim for
+ * a maximum error rate of 500ppm (in practice the
+ * real error is much smaller), but refuse to spend
+ * more than 25ms on it.
*/
-#define QUICK_PIT_MS 15
-#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+#define MAX_QUICK_PIT_MS 25
+#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
static unsigned long quick_pit_calibrate(void)
{
+ int i;
+ u64 tsc, delta;
+ unsigned long d1, d2;
+
/* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
@@ -315,45 +328,52 @@
outb(0xff, 0x42);
outb(0xff, 0x42);
- if (pit_expect_msb(0xff)) {
- int i;
- u64 t1, t2, delta;
- unsigned char expect = 0xfe;
+ /*
+ * The PIT starts counting at the next edge, so we
+ * need to delay for a microsecond. The easiest way
+ * to do that is to just read back the 16-bit counter
+ * once from the PIT.
+ */
+ inb(0x42);
+ inb(0x42);
- t1 = get_cycles();
- for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) {
- if (!pit_expect_msb(expect))
- goto failed;
+ if (pit_expect_msb(0xff, &tsc, &d1)) {
+ for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
+ if (!pit_expect_msb(0xff-i, &delta, &d2))
+ break;
+
+ /*
+ * Iterate until the error is less than 500 ppm
+ */
+ delta -= tsc;
+ if (d1+d2 < delta >> 11)
+ goto success;
}
- t2 = get_cycles();
-
- /*
- * Make sure we can rely on the second TSC timestamp:
- */
- if (!pit_expect_msb(expect))
- goto failed;
-
- /*
- * Ok, if we get here, then we've seen the
- * MSB of the PIT decrement QUICK_PIT_ITERATIONS
- * times, and each MSB had many hits, so we never
- * had any sudden jumps.
- *
- * As a result, we can depend on there not being
- * any odd delays anywhere, and the TSC reads are
- * reliable.
- *
- * kHz = ticks / time-in-seconds / 1000;
- * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000
- * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000)
- */
- delta = (t2 - t1)*PIT_TICK_RATE;
- do_div(delta, QUICK_PIT_ITERATIONS*256*1000);
- printk("Fast TSC calibration using PIT\n");
- return delta;
}
-failed:
+ printk("Fast TSC calibration failed\n");
return 0;
+
+success:
+ /*
+ * Ok, if we get here, then we've seen the
+ * MSB of the PIT decrement 'i' times, and the
+ * error has shrunk to less than 500 ppm.
+ *
+ * As a result, we can depend on there not being
+ * any odd delays anywhere, and the TSC reads are
+ * reliable (within the error). We also adjust the
+ * delta to the middle of the error bars, just
+ * because it looks nicer.
+ *
+ * kHz = ticks / time-in-seconds / 1000;
+ * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
+ * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
+ */
+ delta += (long)(d2 - d1)/2;
+ delta *= PIT_TICK_RATE;
+ do_div(delta, i*256*1000);
+ printk("Fast TSC calibration using PIT\n");
+ return delta;
}
/**
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 92f1c6f..960a8d9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -343,6 +343,11 @@
* flush_tlb_user() for both user and kernel mappings unless
* the Page Global Enable (PGE) feature bit is set. */
*dx |= 0x00002000;
+ /* We also lie, and say we're family id 5. 6 or greater
+ * leads to a rdmsr in early_init_intel which we can't handle.
+ * Family ID is returned as bits 8-12 in ax. */
+ *ax &= 0xFFFFF0FF;
+ *ax |= 0x00000500;
break;
case 0x80000000:
/* Futureproof this a little: if they ask how much extended
@@ -589,19 +594,21 @@
/* Some systems map "vectors" to interrupts weirdly. Lguest has
* a straightforward 1 to 1 mapping, so force that here. */
__get_cpu_var(vector_irq)[vector] = i;
- if (vector != SYSCALL_VECTOR) {
- set_intr_gate(vector,
- interrupt[vector-FIRST_EXTERNAL_VECTOR]);
- set_irq_chip_and_handler_name(i, &lguest_irq_controller,
- handle_level_irq,
- "level");
- }
+ if (vector != SYSCALL_VECTOR)
+ set_intr_gate(vector, interrupt[i]);
}
/* This call is required to set up for 4k stacks, where we have
* separate stacks for hard and soft interrupts. */
irq_ctx_init(smp_processor_id());
}
+void lguest_setup_irq(unsigned int irq)
+{
+ irq_to_desc_alloc_cpu(irq, 0);
+ set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+ handle_level_irq, "level");
+}
+
/*
* Time.
*
diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
index 491e737..aa09870 100644
--- a/arch/x86/math-emu/fpu_aux.c
+++ b/arch/x86/math-emu/fpu_aux.c
@@ -30,20 +30,29 @@
}
/* Needs to be externally visible */
-void finit(void)
+void finit_task(struct task_struct *tsk)
{
- control_word = 0x037f;
- partial_status = 0;
- top = 0; /* We don't keep top in the status word internally. */
- fpu_tag_word = 0xffff;
+ struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+ struct address *oaddr, *iaddr;
+ soft->cwd = 0x037f;
+ soft->swd = 0;
+ soft->ftop = 0; /* We don't keep top in the status word internally. */
+ soft->twd = 0xffff;
/* The behaviour is different from that detailed in
Section 15.1.6 of the Intel manual */
- operand_address.offset = 0;
- operand_address.selector = 0;
- instruction_address.offset = 0;
- instruction_address.selector = 0;
- instruction_address.opcode = 0;
- no_ip_update = 1;
+ oaddr = (struct address *)&soft->foo;
+ oaddr->offset = 0;
+ oaddr->selector = 0;
+ iaddr = (struct address *)&soft->fip;
+ iaddr->offset = 0;
+ iaddr->selector = 0;
+ iaddr->opcode = 0;
+ soft->no_update = 1;
+}
+
+void finit(void)
+{
+ finit_task(current);
}
/*
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 9f20503..6a518dd 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -451,23 +451,24 @@
static void remove_kmmio_fault_pages(struct rcu_head *head)
{
- struct kmmio_delayed_release *dr = container_of(
- head,
- struct kmmio_delayed_release,
- rcu);
+ struct kmmio_delayed_release *dr =
+ container_of(head, struct kmmio_delayed_release, rcu);
struct kmmio_fault_page *p = dr->release_list;
struct kmmio_fault_page **prevp = &dr->release_list;
unsigned long flags;
+
spin_lock_irqsave(&kmmio_lock, flags);
while (p) {
- if (!p->count)
+ if (!p->count) {
list_del_rcu(&p->list);
- else
+ prevp = &p->release_next;
+ } else {
*prevp = p->release_next;
- prevp = &p->release_next;
+ }
p = p->release_next;
}
spin_unlock_irqrestore(&kmmio_lock, flags);
+
/* This is the real RCU destroy call. */
call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
}
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7be47d1..7233bd7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -515,6 +515,17 @@
* primary protection behavior:
*/
__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+
+ /*
+ * Intel Atom errata AAH41 workaround.
+ *
+ * The real fix should be in hw or in a microcode update, but
+ * we also probabilistically try to reduce the window of having
+ * a large TLB mixed with 4K TLBs while instruction fetches are
+ * going on.
+ */
+ __flush_tlb_all();
+
base = NULL;
out_unlock:
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 6c873dc..9812008 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -103,9 +103,6 @@
help
Can we use information of configuration file?
-config HIGHMEM
- bool "High memory support"
-
endmenu
menu "Platform options"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 9606d2b..4ec1633 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -44,6 +44,8 @@
#include <asm/setup.h>
#include <asm/param.h>
+#include <platform/hardware.h>
+
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
#endif
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index c7a021d..c44f830 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -30,6 +30,7 @@
#include <linux/stringify.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <asm/ptrace.h>
#include <asm/timex.h>
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index 33f366b..bdd860d 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -14,6 +14,7 @@
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
#include <asm/hardirq.h>
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index efed889..25d46c8 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -140,16 +140,14 @@
}
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
{
char buf[2];
- if (!tty)
- return;
-
buf[0] = ch;
buf[1] = '\0'; /* Is this NULL necessary? */
__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+ return 1;
}
static void rs_flush_chars(struct tty_struct *tty)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index a104593..5a244f0 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -39,14 +39,13 @@
}
static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
- struct bio *bio,
- unsigned int *seg_size_ptr)
+ struct bio *bio)
{
unsigned int phys_size;
struct bio_vec *bv, *bvprv = NULL;
int cluster, i, high, highprv = 1;
unsigned int seg_size, nr_phys_segs;
- struct bio *fbio;
+ struct bio *fbio, *bbio;
if (!bio)
return 0;
@@ -87,26 +86,20 @@
seg_size = bv->bv_len;
highprv = high;
}
+ bbio = bio;
}
- if (seg_size_ptr)
- *seg_size_ptr = seg_size;
+ if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+ fbio->bi_seg_front_size = seg_size;
+ if (seg_size > bbio->bi_seg_back_size)
+ bbio->bi_seg_back_size = seg_size;
return nr_phys_segs;
}
void blk_recalc_rq_segments(struct request *rq)
{
- unsigned int seg_size = 0, phys_segs;
-
- phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size);
-
- if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
- rq->bio->bi_seg_front_size = seg_size;
- if (seg_size > rq->biotail->bi_seg_back_size)
- rq->biotail->bi_seg_back_size = seg_size;
-
- rq->nr_phys_segments = phys_segs;
+ rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
}
void blk_recount_segments(struct request_queue *q, struct bio *bio)
@@ -114,7 +107,7 @@
struct bio *nxt = bio->bi_next;
bio->bi_next = NULL;
- bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL);
+ bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
bio->bi_next = nxt;
bio->bi_flags |= (1 << BIO_SEG_VALID);
}
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 765fd1c..bee64b7 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -758,8 +758,7 @@
acpi_status status = AE_OK;
extern acpi_status acpi_os_initialize1(void);
-
- status = acpi_os_initialize1();
+ acpi_os_initialize1();
status =
acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
@@ -769,12 +768,6 @@
goto error1;
}
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Unable to initialize ACPI OS objects\n");
- goto error1;
- }
-
/*
* ACPI 2.0 requires the EC driver to be loaded and work before
* the EC device is found in the namespace (i.e. before acpi_initialize_objects()
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index c5e292a..3a0d8ef 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -277,7 +277,7 @@
int pxm, node = -1;
pxm = acpi_get_pxm(handle);
- if (pxm >= 0)
+ if (pxm >= 0 && pxm < MAX_PXM_DOMAINS)
node = acpi_map_pxm_to_node(pxm);
return node;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index b3193ec..1e35f34 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1317,54 +1317,6 @@
return AE_SUPPORT;
}
-#ifdef CONFIG_X86
-
-struct aml_port_desc {
- uint start;
- uint end;
- char* name;
- char warned;
-};
-
-static struct aml_port_desc aml_invalid_port_list[] = {
- {0x20, 0x21, "PIC0", 0},
- {0xA0, 0xA1, "PIC1", 0},
- {0x4D0, 0x4D1, "ELCR", 0}
-};
-
-/*
- * valid_aml_io_address()
- *
- * if valid, return true
- * else invalid, warn once, return false
- */
-static bool valid_aml_io_address(uint address, uint length)
-{
- int i;
- int entries = sizeof(aml_invalid_port_list) / sizeof(struct aml_port_desc);
-
- for (i = 0; i < entries; ++i) {
- if ((address >= aml_invalid_port_list[i].start &&
- address <= aml_invalid_port_list[i].end) ||
- (address + length >= aml_invalid_port_list[i].start &&
- address + length <= aml_invalid_port_list[i].end))
- {
- if (!aml_invalid_port_list[i].warned)
- {
- printk(KERN_ERR "ACPI: Denied BIOS AML access"
- " to invalid port 0x%x+0x%x (%s)\n",
- address, length,
- aml_invalid_port_list[i].name);
- aml_invalid_port_list[i].warned = 1;
- }
- return false; /* invalid */
- }
- }
- return true; /* valid */
-}
-#else
-static inline bool valid_aml_io_address(uint address, uint length) { return true; }
-#endif
/******************************************************************************
*
* FUNCTION: acpi_os_validate_address
@@ -1394,8 +1346,6 @@
switch (space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
- if (!valid_aml_io_address(address, length))
- return AE_AML_ILLEGAL_ADDRESS;
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
/* Only interference checks against SystemIO and SytemMemory
are needed */
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 5192666..00456fc 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -378,6 +378,22 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Toshiba Satellite L300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a603bbf..66e012c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -582,18 +582,18 @@
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
- { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
+ { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 54961c0..ef8b30d 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1289,6 +1289,39 @@
return map;
}
+static bool piix_no_sidpr(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ /*
+ * Samsung DB-P70 only has three ATA ports exposed and
+ * curiously the unconnected first port reports link online
+ * while not responding to SRST protocol causing excessive
+ * detection delay.
+ *
+ * Unfortunately, the system doesn't carry enough DMI
+ * information to identify the machine but does have subsystem
+ * vendor and device set. As it's unclear whether the
+ * subsystem vendor/device is used only for this specific
+ * board, the port can't be disabled solely with the
+ * information; however, turning off SIDPR access works around
+ * the problem. Turn it off.
+ *
+ * This problem is reported in bnc#441240.
+ *
+ * https://bugzilla.novell.com/show_bug.cgi?id=441420
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+ pdev->subsystem_device == 0xb049) {
+ dev_printk(KERN_WARNING, host->dev,
+ "Samsung DB-P70 detected, disabling SIDPR\n");
+ return true;
+ }
+
+ return false;
+}
+
static int __devinit piix_init_sidpr(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -1302,6 +1335,10 @@
if (hpriv->map[i] == IDE)
return 0;
+ /* is it blacklisted? */
+ if (piix_no_sidpr(host))
+ return 0;
+
if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
return 0;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9fbf059..060bcd6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1322,14 +1322,16 @@
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
- return ata_id_u64(id, 100);
+ return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
else
- return ata_id_u32(id, 60);
+ return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
} else {
if (ata_id_current_chs_valid(id))
- return ata_id_u32(id, 57);
+ return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+ id[ATA_ID_CUR_SECTORS];
else
- return id[1] * id[3] * id[6];
+ return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+ id[ATA_ID_SECTORS];
}
}
@@ -4612,7 +4614,7 @@
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
@@ -4727,7 +4729,7 @@
return -1;
DPRINTK("%d sg elements mapped\n", n_elem);
-
+ qc->orig_n_elem = qc->n_elem;
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ce2ef04..ea89091 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2423,11 +2423,14 @@
}
/* prereset() might have cleared ATA_EH_RESET. If so,
- * bang classes and return.
+ * bang classes, thaw and return.
*/
if (reset && !(ehc->i.action & ATA_EH_RESET)) {
ata_for_each_dev(dev, link, ALL)
classes[dev->devno] = ATA_DEV_NONE;
+ if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+ ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
rc = 0;
goto out;
}
@@ -2901,7 +2904,7 @@
int i;
for (i = 0; i < ATA_EH_UA_TRIES; i++) {
- u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+ u8 *sense_buffer = dev->link->ap->sector_buf;
u8 sense_key = 0;
unsigned int err_mask;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 714cb04..f93dc02 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2066,6 +2066,7 @@
iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
udelay(20); /* FIXME: flush */
iowrite8(ap->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = ap->ctl;
/* wait the port to become ready */
return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
@@ -2190,8 +2191,10 @@
}
/* set up device control */
- if (ap->ioaddr.ctl_addr)
+ if (ap->ioaddr.ctl_addr) {
iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+ ap->last_ctl = ap->ctl;
+ }
}
EXPORT_SYMBOL_GPL(ata_sff_postreset);
@@ -2534,6 +2537,7 @@
if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
/* set up device control for ATA_FLAG_SATA_RESET */
iowrite8(ap->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = ap->ctl;
}
DPRINTK("EXIT\n");
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index cf9e984..d7bc925 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -45,8 +45,6 @@
.stepping = 6,
};
-#define PATA_ICSIDE_MAX_SG 128
-
struct pata_icside_state {
void __iomem *irq_port;
void __iomem *ioc_base;
@@ -57,7 +55,6 @@
u8 disabled;
unsigned int speed[ATA_MAX_DEVICES];
} port[2];
- struct scatterlist sg[PATA_ICSIDE_MAX_SG];
};
struct pata_icside_info {
@@ -222,9 +219,7 @@
{
struct ata_port *ap = qc->ap;
struct pata_icside_state *state = ap->host->private_data;
- struct scatterlist *sg, *rsg = state->sg;
unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
- unsigned int si;
/*
* We are simplex; BUG if we try to fiddle with DMA
@@ -233,20 +228,12 @@
BUG_ON(dma_channel_active(state->dma));
/*
- * Copy ATAs scattered sg list into a contiguous array of sg
- */
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- memcpy(rsg, sg, sizeof(*sg));
- rsg++;
- }
-
- /*
* Route the DMA signals to the correct interface
*/
writeb(state->port[ap->port_no].port_sel, state->ioc_base);
set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
- set_dma_sg(state->dma, state->sg, rsg - state->sg);
+ set_dma_sg(state->dma, qc->sg, qc->n_elem);
set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
/* issue r/w command */
@@ -306,8 +293,8 @@
static struct scsi_host_template pata_icside_sht = {
ATA_BASE_SHT(DRV_NAME),
- .sg_tablesize = PATA_ICSIDE_MAX_SG,
- .dma_boundary = ~0, /* no dma boundaries */
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
};
static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7007edd..74b1080 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2218,12 +2218,13 @@
else
handled = mv_host_intr(host, pending_irqs);
}
- spin_unlock(&host->lock);
/* for MSI: unmask; interrupt cause bits will retrigger now */
if (using_msi)
writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+ spin_unlock(&host->lock);
+
return IRQ_RETVAL(handled);
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 55a8eed..f65b537 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2523,7 +2523,7 @@
module_init(nv_init);
module_exit(nv_exit);
module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 43fa90b..f8f578a 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -303,7 +303,7 @@
sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
- unsigned int nid;
+ int nid;
nid = get_nid_for_pfn(pfn);
if (nid < 0)
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 204332b..87e120e 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_BLK_DEV_FD) += floppy.o
obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o
obj-$(CONFIG_PS3_DISK) += ps3disk.o
+obj-$(CONFIG_PS3_VRAM) += ps3vram.o
obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index cc25057..eeea477 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -173,7 +173,7 @@
return;
while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
msleep(Sms);
- if (i <= 0) {
+ if (i < 0) {
printk(KERN_ERR
"aoe: %s holds ref: %s\n",
skb->dev ? skb->dev->name : "netif",
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b5a0611..4f9b6d7 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3606,11 +3606,9 @@
if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
return -ENODEV;
- /* Some devices (notably the HP Smart Array 5i Controller)
- need a little pause here */
- schedule_timeout_uninterruptible(30*HZ);
-
- /* Now try to get the controller to respond to a no-op */
+ /* Now try to get the controller to respond to a no-op. Some
+ devices (notably the HP Smart Array 5i Controller) need
+ up to 30 seconds to respond. */
for (i=0; i<30; i++) {
if (cciss_noop(pdev) == 0)
break;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edbaac6..bf03455 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -392,8 +392,7 @@
struct loop_device *lo = p->lo;
struct page *page = buf->page;
sector_t IV;
- size_t size;
- int ret;
+ int size, ret;
ret = buf->ops->confirm(pipe, buf);
if (unlikely(ret))
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
new file mode 100644
index 0000000..393ed67
--- /dev/null
+++ b/drivers/block/ps3vram.c
@@ -0,0 +1,865 @@
+/*
+ * ps3vram - Use extra PS3 video ram as MTD block device.
+ *
+ * Copyright 2009 Sony Corporation
+ *
+ * Based on the MTD ps3vram driver, which is
+ * Copyright (c) 2007-2008 Jim Paris <jim@jtan.com>
+ * Added support RSX DMA Vivien Chappelier <vivien.chappelier@free.fr>
+ */
+
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+#include <asm/firmware.h>
+#include <asm/lv1call.h>
+#include <asm/ps3.h>
+
+
+#define DEVICE_NAME "ps3vram"
+
+
+#define XDR_BUF_SIZE (2 * 1024 * 1024) /* XDR buffer (must be 1MiB aligned) */
+#define XDR_IOIF 0x0c000000
+
+#define FIFO_BASE XDR_IOIF
+#define FIFO_SIZE (64 * 1024)
+
+#define DMA_PAGE_SIZE (4 * 1024)
+
+#define CACHE_PAGE_SIZE (256 * 1024)
+#define CACHE_PAGE_COUNT ((XDR_BUF_SIZE - FIFO_SIZE) / CACHE_PAGE_SIZE)
+
+#define CACHE_OFFSET CACHE_PAGE_SIZE
+#define FIFO_OFFSET 0
+
+#define CTRL_PUT 0x10
+#define CTRL_GET 0x11
+#define CTRL_TOP 0x15
+
+#define UPLOAD_SUBCH 1
+#define DOWNLOAD_SUBCH 2
+
+#define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN 0x0000030c
+#define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY 0x00000104
+
+#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
+
+#define CACHE_PAGE_PRESENT 1
+#define CACHE_PAGE_DIRTY 2
+
+struct ps3vram_tag {
+ unsigned int address;
+ unsigned int flags;
+};
+
+struct ps3vram_cache {
+ unsigned int page_count;
+ unsigned int page_size;
+ struct ps3vram_tag *tags;
+ unsigned int hit;
+ unsigned int miss;
+};
+
+struct ps3vram_priv {
+ struct request_queue *queue;
+ struct gendisk *gendisk;
+
+ u64 size;
+
+ u64 memory_handle;
+ u64 context_handle;
+ u32 *ctrl;
+ u32 *reports;
+ u8 __iomem *ddr_base;
+ u8 *xdr_buf;
+
+ u32 *fifo_base;
+ u32 *fifo_ptr;
+
+ struct ps3vram_cache cache;
+
+ /* Used to serialize cache/DMA operations */
+ struct mutex lock;
+};
+
+
+static int ps3vram_major;
+
+
+static struct block_device_operations ps3vram_fops = {
+ .owner = THIS_MODULE,
+};
+
+
+#define DMA_NOTIFIER_HANDLE_BASE 0x66604200 /* first DMA notifier handle */
+#define DMA_NOTIFIER_OFFSET_BASE 0x1000 /* first DMA notifier offset */
+#define DMA_NOTIFIER_SIZE 0x40
+#define NOTIFIER 7 /* notifier used for completion report */
+
+static char *size = "256M";
+module_param(size, charp, 0);
+MODULE_PARM_DESC(size, "memory size");
+
+static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
+{
+ return (void *)reports + DMA_NOTIFIER_OFFSET_BASE +
+ DMA_NOTIFIER_SIZE * notifier;
+}
+
+static void ps3vram_notifier_reset(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
+ int i;
+
+ for (i = 0; i < 4; i++)
+ notify[i] = 0xffffffff;
+}
+
+static int ps3vram_notifier_wait(struct ps3_system_bus_device *dev,
+ unsigned int timeout_ms)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
+ unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+ do {
+ if (!notify[3])
+ return 0;
+ msleep(1);
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static void ps3vram_init_ring(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
+ priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
+}
+
+static int ps3vram_wait_ring(struct ps3_system_bus_device *dev,
+ unsigned int timeout_ms)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+ do {
+ if (priv->ctrl[CTRL_PUT] == priv->ctrl[CTRL_GET])
+ return 0;
+ msleep(1);
+ } while (time_before(jiffies, timeout));
+
+ dev_warn(&dev->core, "FIFO timeout (%08x/%08x/%08x)\n",
+ priv->ctrl[CTRL_PUT], priv->ctrl[CTRL_GET],
+ priv->ctrl[CTRL_TOP]);
+
+ return -ETIMEDOUT;
+}
+
+static void ps3vram_out_ring(struct ps3vram_priv *priv, u32 data)
+{
+ *(priv->fifo_ptr)++ = data;
+}
+
+static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan, u32 tag,
+ u32 size)
+{
+ ps3vram_out_ring(priv, (size << 18) | (chan << 13) | tag);
+}
+
+static void ps3vram_rewind_ring(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ int status;
+
+ ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
+
+ priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
+
+ /* asking the HV for a blit will kick the FIFO */
+ status = lv1_gpu_context_attribute(priv->context_handle,
+ L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
+ 0, 0, 0);
+ if (status)
+ dev_err(&dev->core,
+ "%s: lv1_gpu_context_attribute failed %d\n", __func__,
+ status);
+
+ priv->fifo_ptr = priv->fifo_base;
+}
+
+static void ps3vram_fire_ring(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ int status;
+
+ mutex_lock(&ps3_gpu_mutex);
+
+ priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET +
+ (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
+
+ /* asking the HV for a blit will kick the FIFO */
+ status = lv1_gpu_context_attribute(priv->context_handle,
+ L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, 0,
+ 0, 0, 0);
+ if (status)
+ dev_err(&dev->core,
+ "%s: lv1_gpu_context_attribute failed %d\n", __func__,
+ status);
+
+ if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
+ FIFO_SIZE - 1024) {
+ dev_dbg(&dev->core, "FIFO full, rewinding\n");
+ ps3vram_wait_ring(dev, 200);
+ ps3vram_rewind_ring(dev);
+ }
+
+ mutex_unlock(&ps3_gpu_mutex);
+}
+
+static void ps3vram_bind(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
+ ps3vram_out_ring(priv, 0x31337303);
+ ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x180, 3);
+ ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
+ ps3vram_out_ring(priv, 0xfeed0001); /* DMA system RAM instance */
+ ps3vram_out_ring(priv, 0xfeed0000); /* DMA video RAM instance */
+
+ ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0, 1);
+ ps3vram_out_ring(priv, 0x3137c0de);
+ ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x180, 3);
+ ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
+ ps3vram_out_ring(priv, 0xfeed0000); /* DMA video RAM instance */
+ ps3vram_out_ring(priv, 0xfeed0001); /* DMA system RAM instance */
+
+ ps3vram_fire_ring(dev);
+}
+
+static int ps3vram_upload(struct ps3_system_bus_device *dev,
+ unsigned int src_offset, unsigned int dst_offset,
+ int len, int count)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ ps3vram_begin_ring(priv, UPLOAD_SUBCH,
+ NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
+ ps3vram_out_ring(priv, XDR_IOIF + src_offset);
+ ps3vram_out_ring(priv, dst_offset);
+ ps3vram_out_ring(priv, len);
+ ps3vram_out_ring(priv, len);
+ ps3vram_out_ring(priv, len);
+ ps3vram_out_ring(priv, count);
+ ps3vram_out_ring(priv, (1 << 8) | 1);
+ ps3vram_out_ring(priv, 0);
+
+ ps3vram_notifier_reset(dev);
+ ps3vram_begin_ring(priv, UPLOAD_SUBCH,
+ NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
+ ps3vram_out_ring(priv, 0);
+ ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x100, 1);
+ ps3vram_out_ring(priv, 0);
+ ps3vram_fire_ring(dev);
+ if (ps3vram_notifier_wait(dev, 200) < 0) {
+ dev_warn(&dev->core, "%s: Notifier timeout\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int ps3vram_download(struct ps3_system_bus_device *dev,
+ unsigned int src_offset, unsigned int dst_offset,
+ int len, int count)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
+ NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
+ ps3vram_out_ring(priv, src_offset);
+ ps3vram_out_ring(priv, XDR_IOIF + dst_offset);
+ ps3vram_out_ring(priv, len);
+ ps3vram_out_ring(priv, len);
+ ps3vram_out_ring(priv, len);
+ ps3vram_out_ring(priv, count);
+ ps3vram_out_ring(priv, (1 << 8) | 1);
+ ps3vram_out_ring(priv, 0);
+
+ ps3vram_notifier_reset(dev);
+ ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
+ NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
+ ps3vram_out_ring(priv, 0);
+ ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x100, 1);
+ ps3vram_out_ring(priv, 0);
+ ps3vram_fire_ring(dev);
+ if (ps3vram_notifier_wait(dev, 200) < 0) {
+ dev_warn(&dev->core, "%s: Notifier timeout\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void ps3vram_cache_evict(struct ps3_system_bus_device *dev, int entry)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ struct ps3vram_cache *cache = &priv->cache;
+
+ if (!(cache->tags[entry].flags & CACHE_PAGE_DIRTY))
+ return;
+
+ dev_dbg(&dev->core, "Flushing %d: 0x%08x\n", entry,
+ cache->tags[entry].address);
+ if (ps3vram_upload(dev, CACHE_OFFSET + entry * cache->page_size,
+ cache->tags[entry].address, DMA_PAGE_SIZE,
+ cache->page_size / DMA_PAGE_SIZE) < 0) {
+ dev_err(&dev->core,
+ "Failed to upload from 0x%x to " "0x%x size 0x%x\n",
+ entry * cache->page_size, cache->tags[entry].address,
+ cache->page_size);
+ }
+ cache->tags[entry].flags &= ~CACHE_PAGE_DIRTY;
+}
+
+static void ps3vram_cache_load(struct ps3_system_bus_device *dev, int entry,
+ unsigned int address)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ struct ps3vram_cache *cache = &priv->cache;
+
+ dev_dbg(&dev->core, "Fetching %d: 0x%08x\n", entry, address);
+ if (ps3vram_download(dev, address,
+ CACHE_OFFSET + entry * cache->page_size,
+ DMA_PAGE_SIZE,
+ cache->page_size / DMA_PAGE_SIZE) < 0) {
+ dev_err(&dev->core,
+ "Failed to download from 0x%x to 0x%x size 0x%x\n",
+ address, entry * cache->page_size, cache->page_size);
+ }
+
+ cache->tags[entry].address = address;
+ cache->tags[entry].flags |= CACHE_PAGE_PRESENT;
+}
+
+
+static void ps3vram_cache_flush(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ struct ps3vram_cache *cache = &priv->cache;
+ int i;
+
+ dev_dbg(&dev->core, "FLUSH\n");
+ for (i = 0; i < cache->page_count; i++) {
+ ps3vram_cache_evict(dev, i);
+ cache->tags[i].flags = 0;
+ }
+}
+
+static unsigned int ps3vram_cache_match(struct ps3_system_bus_device *dev,
+ loff_t address)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ struct ps3vram_cache *cache = &priv->cache;
+ unsigned int base;
+ unsigned int offset;
+ int i;
+ static int counter;
+
+ offset = (unsigned int) (address & (cache->page_size - 1));
+ base = (unsigned int) (address - offset);
+
+ /* fully associative check */
+ for (i = 0; i < cache->page_count; i++) {
+ if ((cache->tags[i].flags & CACHE_PAGE_PRESENT) &&
+ cache->tags[i].address == base) {
+ cache->hit++;
+ dev_dbg(&dev->core, "Found entry %d: 0x%08x\n", i,
+ cache->tags[i].address);
+ return i;
+ }
+ }
+
+ /* choose a random entry */
+ i = (jiffies + (counter++)) % cache->page_count;
+ dev_dbg(&dev->core, "Using entry %d\n", i);
+
+ ps3vram_cache_evict(dev, i);
+ ps3vram_cache_load(dev, i, base);
+
+ cache->miss++;
+ return i;
+}
+
+static int ps3vram_cache_init(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ priv->cache.page_count = CACHE_PAGE_COUNT;
+ priv->cache.page_size = CACHE_PAGE_SIZE;
+ priv->cache.tags = kzalloc(sizeof(struct ps3vram_tag) *
+ CACHE_PAGE_COUNT, GFP_KERNEL);
+ if (priv->cache.tags == NULL) {
+ dev_err(&dev->core, "Could not allocate cache tags\n");
+ return -ENOMEM;
+ }
+
+ dev_info(&dev->core, "Created ram cache: %d entries, %d KiB each\n",
+ CACHE_PAGE_COUNT, CACHE_PAGE_SIZE / 1024);
+
+ return 0;
+}
+
+static void ps3vram_cache_cleanup(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ ps3vram_cache_flush(dev);
+ kfree(priv->cache.tags);
+}
+
+static int ps3vram_read(struct ps3_system_bus_device *dev, loff_t from,
+ size_t len, size_t *retlen, u_char *buf)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ unsigned int cached, count;
+
+ dev_dbg(&dev->core, "%s: from=0x%08x len=0x%zx\n", __func__,
+ (unsigned int)from, len);
+
+ if (from >= priv->size)
+ return -EIO;
+
+ if (len > priv->size - from)
+ len = priv->size - from;
+
+ /* Copy from vram to buf */
+ count = len;
+ while (count) {
+ unsigned int offset, avail;
+ unsigned int entry;
+
+ offset = (unsigned int) (from & (priv->cache.page_size - 1));
+ avail = priv->cache.page_size - offset;
+
+ mutex_lock(&priv->lock);
+
+ entry = ps3vram_cache_match(dev, from);
+ cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
+
+ dev_dbg(&dev->core, "%s: from=%08x cached=%08x offset=%08x "
+ "avail=%08x count=%08x\n", __func__,
+ (unsigned int)from, cached, offset, avail, count);
+
+ if (avail > count)
+ avail = count;
+ memcpy(buf, priv->xdr_buf + cached, avail);
+
+ mutex_unlock(&priv->lock);
+
+ buf += avail;
+ count -= avail;
+ from += avail;
+ }
+
+ *retlen = len;
+ return 0;
+}
+
+static int ps3vram_write(struct ps3_system_bus_device *dev, loff_t to,
+ size_t len, size_t *retlen, const u_char *buf)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ unsigned int cached, count;
+
+ if (to >= priv->size)
+ return -EIO;
+
+ if (len > priv->size - to)
+ len = priv->size - to;
+
+ /* Copy from buf to vram */
+ count = len;
+ while (count) {
+ unsigned int offset, avail;
+ unsigned int entry;
+
+ offset = (unsigned int) (to & (priv->cache.page_size - 1));
+ avail = priv->cache.page_size - offset;
+
+ mutex_lock(&priv->lock);
+
+ entry = ps3vram_cache_match(dev, to);
+ cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
+
+ dev_dbg(&dev->core, "%s: to=%08x cached=%08x offset=%08x "
+ "avail=%08x count=%08x\n", __func__, (unsigned int)to,
+ cached, offset, avail, count);
+
+ if (avail > count)
+ avail = count;
+ memcpy(priv->xdr_buf + cached, buf, avail);
+
+ priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
+
+ mutex_unlock(&priv->lock);
+
+ buf += avail;
+ count -= avail;
+ to += avail;
+ }
+
+ *retlen = len;
+ return 0;
+}
+
+static int ps3vram_proc_show(struct seq_file *m, void *v)
+{
+ struct ps3vram_priv *priv = m->private;
+
+ seq_printf(m, "hit:%u\nmiss:%u\n", priv->cache.hit, priv->cache.miss);
+ return 0;
+}
+
+static int ps3vram_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ps3vram_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations ps3vram_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ps3vram_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void __devinit ps3vram_proc_init(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+ struct proc_dir_entry *pde;
+
+ pde = proc_create(DEVICE_NAME, 0444, NULL, &ps3vram_proc_fops);
+ if (!pde) {
+ dev_warn(&dev->core, "failed to create /proc entry\n");
+ return;
+ }
+
+ pde->owner = THIS_MODULE;
+ pde->data = priv;
+}
+
+static int ps3vram_make_request(struct request_queue *q, struct bio *bio)
+{
+ struct ps3_system_bus_device *dev = q->queuedata;
+ int write = bio_data_dir(bio) == WRITE;
+ const char *op = write ? "write" : "read";
+ loff_t offset = bio->bi_sector << 9;
+ int error = 0;
+ struct bio_vec *bvec;
+ unsigned int i;
+
+ dev_dbg(&dev->core, "%s\n", __func__);
+
+ bio_for_each_segment(bvec, bio, i) {
+ /* PS3 is ppc64, so we don't handle highmem */
+ char *ptr = page_address(bvec->bv_page) + bvec->bv_offset;
+ size_t len = bvec->bv_len, retlen;
+
+ dev_dbg(&dev->core, " %s %zu bytes at offset %llu\n", op,
+ len, offset);
+ if (write)
+ error = ps3vram_write(dev, offset, len, &retlen, ptr);
+ else
+ error = ps3vram_read(dev, offset, len, &retlen, ptr);
+
+ if (error) {
+ dev_err(&dev->core, "%s failed\n", op);
+ goto out;
+ }
+
+ if (retlen != len) {
+ dev_err(&dev->core, "Short %s\n", op);
+ goto out;
+ }
+
+ offset += len;
+ }
+
+ dev_dbg(&dev->core, "%s completed\n", op);
+
+out:
+ bio_endio(bio, error);
+ return 0;
+}
+
+static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv;
+ int error, status;
+ struct request_queue *queue;
+ struct gendisk *gendisk;
+ u64 ddr_lpar, ctrl_lpar, info_lpar, reports_lpar, ddr_size,
+ reports_size;
+ char *rest;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ mutex_init(&priv->lock);
+ dev->core.driver_data = priv;
+
+ priv = dev->core.driver_data;
+
+ /* Allocate XDR buffer (1MiB aligned) */
+ priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
+ get_order(XDR_BUF_SIZE));
+ if (priv->xdr_buf == NULL) {
+ dev_err(&dev->core, "Could not allocate XDR buffer\n");
+ error = -ENOMEM;
+ goto fail_free_priv;
+ }
+
+ /* Put FIFO at begginning of XDR buffer */
+ priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
+ priv->fifo_ptr = priv->fifo_base;
+
+ /* XXX: Need to open GPU, in case ps3fb or snd_ps3 aren't loaded */
+ if (ps3_open_hv_device(dev)) {
+ dev_err(&dev->core, "ps3_open_hv_device failed\n");
+ error = -EAGAIN;
+ goto out_close_gpu;
+ }
+
+ /* Request memory */
+ status = -1;
+ ddr_size = ALIGN(memparse(size, &rest), 1024*1024);
+ if (!ddr_size) {
+ dev_err(&dev->core, "Specified size is too small\n");
+ error = -EINVAL;
+ goto out_close_gpu;
+ }
+
+ while (ddr_size > 0) {
+ status = lv1_gpu_memory_allocate(ddr_size, 0, 0, 0, 0,
+ &priv->memory_handle,
+ &ddr_lpar);
+ if (!status)
+ break;
+ ddr_size -= 1024*1024;
+ }
+ if (status) {
+ dev_err(&dev->core, "lv1_gpu_memory_allocate failed %d\n",
+ status);
+ error = -ENOMEM;
+ goto out_free_xdr_buf;
+ }
+
+ /* Request context */
+ status = lv1_gpu_context_allocate(priv->memory_handle, 0,
+ &priv->context_handle, &ctrl_lpar,
+ &info_lpar, &reports_lpar,
+ &reports_size);
+ if (status) {
+ dev_err(&dev->core, "lv1_gpu_context_allocate failed %d\n",
+ status);
+ error = -ENOMEM;
+ goto out_free_memory;
+ }
+
+ /* Map XDR buffer to RSX */
+ status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
+ ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
+ XDR_BUF_SIZE, 0);
+ if (status) {
+ dev_err(&dev->core, "lv1_gpu_context_iomap failed %d\n",
+ status);
+ error = -ENOMEM;
+ goto out_free_context;
+ }
+
+ priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
+
+ if (!priv->ddr_base) {
+ dev_err(&dev->core, "ioremap DDR failed\n");
+ error = -ENOMEM;
+ goto out_free_context;
+ }
+
+ priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
+ if (!priv->ctrl) {
+ dev_err(&dev->core, "ioremap CTRL failed\n");
+ error = -ENOMEM;
+ goto out_unmap_vram;
+ }
+
+ priv->reports = ioremap(reports_lpar, reports_size);
+ if (!priv->reports) {
+ dev_err(&dev->core, "ioremap REPORTS failed\n");
+ error = -ENOMEM;
+ goto out_unmap_ctrl;
+ }
+
+ mutex_lock(&ps3_gpu_mutex);
+ ps3vram_init_ring(dev);
+ mutex_unlock(&ps3_gpu_mutex);
+
+ priv->size = ddr_size;
+
+ ps3vram_bind(dev);
+
+ mutex_lock(&ps3_gpu_mutex);
+ error = ps3vram_wait_ring(dev, 100);
+ mutex_unlock(&ps3_gpu_mutex);
+ if (error < 0) {
+ dev_err(&dev->core, "Failed to initialize channels\n");
+ error = -ETIMEDOUT;
+ goto out_unmap_reports;
+ }
+
+ ps3vram_cache_init(dev);
+ ps3vram_proc_init(dev);
+
+ queue = blk_alloc_queue(GFP_KERNEL);
+ if (!queue) {
+ dev_err(&dev->core, "blk_alloc_queue failed\n");
+ error = -ENOMEM;
+ goto out_cache_cleanup;
+ }
+
+ priv->queue = queue;
+ queue->queuedata = dev;
+ blk_queue_make_request(queue, ps3vram_make_request);
+ blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS);
+ blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS);
+ blk_queue_max_segment_size(queue, MAX_SEGMENT_SIZE);
+ blk_queue_max_sectors(queue, SAFE_MAX_SECTORS);
+
+ gendisk = alloc_disk(1);
+ if (!gendisk) {
+ dev_err(&dev->core, "alloc_disk failed\n");
+ error = -ENOMEM;
+ goto fail_cleanup_queue;
+ }
+
+ priv->gendisk = gendisk;
+ gendisk->major = ps3vram_major;
+ gendisk->first_minor = 0;
+ gendisk->fops = &ps3vram_fops;
+ gendisk->queue = queue;
+ gendisk->private_data = dev;
+ gendisk->driverfs_dev = &dev->core;
+ strlcpy(gendisk->disk_name, DEVICE_NAME, sizeof(gendisk->disk_name));
+ set_capacity(gendisk, priv->size >> 9);
+
+ dev_info(&dev->core, "%s: Using %lu MiB of GPU memory\n",
+ gendisk->disk_name, get_capacity(gendisk) >> 11);
+
+ add_disk(gendisk);
+ return 0;
+
+fail_cleanup_queue:
+ blk_cleanup_queue(queue);
+out_cache_cleanup:
+ remove_proc_entry(DEVICE_NAME, NULL);
+ ps3vram_cache_cleanup(dev);
+out_unmap_reports:
+ iounmap(priv->reports);
+out_unmap_ctrl:
+ iounmap(priv->ctrl);
+out_unmap_vram:
+ iounmap(priv->ddr_base);
+out_free_context:
+ lv1_gpu_context_free(priv->context_handle);
+out_free_memory:
+ lv1_gpu_memory_free(priv->memory_handle);
+out_close_gpu:
+ ps3_close_hv_device(dev);
+out_free_xdr_buf:
+ free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
+fail_free_priv:
+ kfree(priv);
+ dev->core.driver_data = NULL;
+fail:
+ return error;
+}
+
+static int ps3vram_remove(struct ps3_system_bus_device *dev)
+{
+ struct ps3vram_priv *priv = dev->core.driver_data;
+
+ del_gendisk(priv->gendisk);
+ put_disk(priv->gendisk);
+ blk_cleanup_queue(priv->queue);
+ remove_proc_entry(DEVICE_NAME, NULL);
+ ps3vram_cache_cleanup(dev);
+ iounmap(priv->reports);
+ iounmap(priv->ctrl);
+ iounmap(priv->ddr_base);
+ lv1_gpu_context_free(priv->context_handle);
+ lv1_gpu_memory_free(priv->memory_handle);
+ ps3_close_hv_device(dev);
+ free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
+ kfree(priv);
+ dev->core.driver_data = NULL;
+ return 0;
+}
+
+static struct ps3_system_bus_driver ps3vram = {
+ .match_id = PS3_MATCH_ID_GPU,
+ .match_sub_id = PS3_MATCH_SUB_ID_GPU_RAMDISK,
+ .core.name = DEVICE_NAME,
+ .core.owner = THIS_MODULE,
+ .probe = ps3vram_probe,
+ .remove = ps3vram_remove,
+ .shutdown = ps3vram_remove,
+};
+
+
+static int __init ps3vram_init(void)
+{
+ int error;
+
+ if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+ return -ENODEV;
+
+ error = register_blkdev(0, DEVICE_NAME);
+ if (error <= 0) {
+ pr_err("%s: register_blkdev failed %d\n", DEVICE_NAME, error);
+ return error;
+ }
+ ps3vram_major = error;
+
+ pr_info("%s: registered block device major %d\n", DEVICE_NAME,
+ ps3vram_major);
+
+ error = ps3_system_bus_driver_register(&ps3vram);
+ if (error)
+ unregister_blkdev(ps3vram_major, DEVICE_NAME);
+
+ return error;
+}
+
+static void __exit ps3vram_exit(void)
+{
+ ps3_system_bus_driver_unregister(&ps3vram);
+ unregister_blkdev(ps3vram_major, DEVICE_NAME);
+}
+
+module_init(ps3vram_init);
+module_exit(ps3vram_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PS3 Video RAM Storage Driver");
+MODULE_AUTHOR("Sony Corporation");
+MODULE_ALIAS(PS3_MODULE_ALIAS_GPU_RAMDISK);
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b6c8ce2..8f90508 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -977,6 +977,8 @@
break;
case XenbusStateClosing:
+ if (info->gd == NULL)
+ xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 381d686..119be34 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -489,6 +489,28 @@
ace->fsm_state, ace->id_req_count);
#endif
+ /* Verify that there is actually a CF in the slot. If not, then
+ * bail out back to the idle state and wake up all the waiters */
+ status = ace_in32(ace, ACE_STATUS);
+ if ((status & ACE_STATUS_CFDETECT) == 0) {
+ ace->fsm_state = ACE_FSM_STATE_IDLE;
+ ace->media_change = 1;
+ set_capacity(ace->gd, 0);
+ dev_info(ace->dev, "No CF in slot\n");
+
+ /* Drop all pending requests */
+ while ((req = elv_next_request(ace->queue)) != NULL)
+ end_request(req, 0);
+
+ /* Drop back to IDLE state and notify waiters */
+ ace->fsm_state = ACE_FSM_STATE_IDLE;
+ ace->id_result = -EIO;
+ while (ace->id_req_count) {
+ complete(&ace->id_completion);
+ ace->id_req_count--;
+ }
+ }
+
switch (ace->fsm_state) {
case ACE_FSM_STATE_IDLE:
/* See if there is anything to do */
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 52f4361..d765afd 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -271,15 +271,15 @@
nb_order = (nb_order >> 1) & 7;
pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
nb_aper = nb_base << 25;
- if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
- return 0;
- }
/* Northbridge seems to contain crap. Try the AGP bridge. */
pci_read_config_word(agp, cap+0x14, &apsize);
- if (apsize == 0xffff)
+ if (apsize == 0xffff) {
+ if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+ return 0;
return -1;
+ }
apsize &= 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
@@ -301,6 +301,11 @@
order = nb_order;
}
+ if (nb_order >= order) {
+ if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+ return 0;
+ }
+
dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
aper, 32 << order);
if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index c771418..4373adb 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -633,13 +633,15 @@
break;
}
}
- if (gtt_entries > 0)
+ if (gtt_entries > 0) {
dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
gtt_entries / KB(1), local ? "local" : "stolen");
- else
+ gtt_entries /= KB(4);
+ } else {
dev_info(&agp_bridge->dev->dev,
"no pre-allocated video memory detected\n");
- gtt_entries /= KB(4);
+ gtt_entries = 0;
+ }
intel_private.gtt_entries = gtt_entries;
}
diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c
index db60539..699e342 100644
--- a/drivers/char/agp/parisc-agp.c
+++ b/drivers/char/agp/parisc-agp.c
@@ -359,9 +359,16 @@
return error;
}
-static struct device *next_device(struct klist_iter *i) {
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+static int
+find_quicksilver(struct device *dev, void *data)
+{
+ struct parisc_device **lba = data;
+ struct parisc_device *padev = to_parisc_device(dev);
+
+ if (IS_QUICKSILVER(padev))
+ *lba = padev;
+
+ return 0;
}
static int
@@ -372,8 +379,6 @@
int err = -1;
struct parisc_device *sba = NULL, *lba = NULL;
struct lba_device *lbadev = NULL;
- struct device *dev = NULL;
- struct klist_iter i;
if (!sba_list)
goto out;
@@ -386,13 +391,7 @@
}
/* Now search our Pluto for our precious AGP device... */
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *padev = to_parisc_device(dev);
- if (IS_QUICKSILVER(padev))
- lba = padev;
- }
- klist_iter_exit(&i);
+ device_for_each_child(&sba->dev, &lba, find_quicksilver);
if (!lba) {
printk(KERN_INFO DRVPFX "No AGP devices found.\n");
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 6e6eb44..c76bccf 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -1139,15 +1139,6 @@
hvcsd->tty = tty;
tty->driver_data = hvcsd;
- /*
- * Set this driver to low latency so that we actually have a chance at
- * catching a throttled TTY after we flip_buffer_push. Otherwise the
- * flush_to_async may not execute until after the kernel_thread has
- * yielded and resumed the next flip_buffer_push resulting in data
- * loss.
- */
- tty->low_latency = 1;
-
memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
/*
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 406f874..2989056 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -810,7 +810,6 @@
hp = &hvsi_ports[line];
tty->driver_data = hp;
- tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */
mb();
if (hp->state == HVSI_FSP_DIED)
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index ba68a46..538313f 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@
return -EBUSY;
if (cpu_is_omap24xx()) {
- rng_ick = clk_get(&pdev->dev, "rng_ick");
+ rng_ick = clk_get(&pdev->dev, "ick");
if (IS_ERR(rng_ick)) {
dev_err(&pdev->dev, "Could not get rng_ick\n");
ret = PTR_ERR(rng_ick);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b55cb67..d6daf3c 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -754,11 +754,6 @@
.release = cpufreq_sysfs_release,
};
-static struct kobj_type ktype_empty_cpufreq = {
- .sysfs_ops = &sysfs_ops,
- .release = cpufreq_sysfs_release,
-};
-
/**
* cpufreq_add_dev - add a CPU device
@@ -892,36 +887,26 @@
memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
/* prepare interface data */
- if (!cpufreq_driver->hide_interface) {
- ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+ "cpufreq");
+ if (ret)
+ goto err_out_driver_exit;
+
+ /* set up files for this cpu device */
+ drv_attr = cpufreq_driver->attr;
+ while ((drv_attr) && (*drv_attr)) {
+ ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
goto err_out_driver_exit;
-
- /* set up files for this cpu device */
- drv_attr = cpufreq_driver->attr;
- while ((drv_attr) && (*drv_attr)) {
- ret = sysfs_create_file(&policy->kobj,
- &((*drv_attr)->attr));
- if (ret)
- goto err_out_driver_exit;
- drv_attr++;
- }
- if (cpufreq_driver->get) {
- ret = sysfs_create_file(&policy->kobj,
- &cpuinfo_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- if (cpufreq_driver->target) {
- ret = sysfs_create_file(&policy->kobj,
- &scaling_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- } else {
- ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ drv_attr++;
+ }
+ if (cpufreq_driver->get) {
+ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+ if (ret)
+ goto err_out_driver_exit;
+ }
+ if (cpufreq_driver->target) {
+ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
goto err_out_driver_exit;
}
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index 33bd753..25b743a 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -1,5 +1,5 @@
/*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dca/dca-sysfs.c b/drivers/dca/dca-sysfs.c
index bb538b9..ee916c9 100644
--- a/drivers/dca/dca-sysfs.c
+++ b/drivers/dca/dca-sysfs.c
@@ -1,3 +1,24 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 732fa1e..e190d8b 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -430,13 +430,15 @@
static void __exit dmatest_exit(void)
{
struct dmatest_chan *dtc, *_dtc;
+ struct dma_chan *chan;
list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
list_del(&dtc->node);
+ chan = dtc->chan;
dmatest_cleanup_channel(dtc);
pr_debug("dmatest: dropped channel %s\n",
- dma_chan_name(dtc->chan));
- dma_release_channel(dtc->chan);
+ dma_chan_name(chan));
+ dma_release_channel(chan);
}
}
module_exit(dmatest_exit);
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 70126a6..86d6da4 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -158,7 +158,8 @@
static void dma_halt(struct fsl_dma_chan *fsl_chan)
{
- int i = 0;
+ int i;
+
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
32);
@@ -166,8 +167,11 @@
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
- while (!dma_is_idle(fsl_chan) && (i++ < 100))
+ for (i = 0; i < 100; i++) {
+ if (dma_is_idle(fsl_chan))
+ break;
udelay(10);
+ }
if (i >= 100 && !dma_is_idle(fsl_chan))
dev_err(fsl_chan->dev, "DMA halt timeout!\n");
}
diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c
index 4105d65..ed83dd9 100644
--- a/drivers/dma/ioat.c
+++ b/drivers/dma/ioat.c
@@ -1,6 +1,6 @@
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 6cf622d..c012a1e 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -1,6 +1,6 @@
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -49,6 +49,23 @@
#define DCA_TAG_MAP_MASK 0xDF
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+ return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+ (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+ (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+ (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+ (tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
/*
* "Legacy" DCA systems do not implement the DCA register set in the
* I/OAT device. Software needs direct support for their tag mappings.
@@ -452,6 +469,13 @@
ioatdca->tag_map[i] = 0;
}
+ if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+ dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+ "disabling DCA\n");
+ free_dca_provider(dca);
+ return NULL;
+ }
+
err = register_dca_provider(dca, &pdev->dev);
if (err) {
free_dca_provider(dca);
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index b3759c4..5905cd3 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1,6 +1,6 @@
/*
* Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2007 Intel Corporation.
+ * Copyright(c) 2004 - 2009 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -189,11 +189,13 @@
ioat_chan->xfercap = xfercap;
ioat_chan->desccount = 0;
INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
- if (ioat_chan->device->version != IOAT_VER_1_2) {
- writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
- | IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- }
+ if (ioat_chan->device->version == IOAT_VER_2_0)
+ writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+ IOAT_DMA_DCA_ANY_CPU,
+ ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+ else if (ioat_chan->device->version == IOAT_VER_3_0)
+ writel(IOAT_DMA_DCA_ANY_CPU,
+ ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
spin_lock_init(&ioat_chan->cleanup_lock);
spin_lock_init(&ioat_chan->desc_lock);
INIT_LIST_HEAD(&ioat_chan->free_desc);
@@ -1169,9 +1171,8 @@
* up if the client is done with the descriptor
*/
if (async_tx_test_ack(&desc->async_tx)) {
- list_del(&desc->node);
- list_add_tail(&desc->node,
- &ioat_chan->free_desc);
+ list_move_tail(&desc->node,
+ &ioat_chan->free_desc);
} else
desc->async_tx.cookie = 0;
} else {
@@ -1362,6 +1363,7 @@
dma_cookie_t cookie;
int err = 0;
struct completion cmp;
+ unsigned long tmo;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
@@ -1413,9 +1415,10 @@
}
device->common.device_issue_pending(dma_chan);
- wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
- if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+ if (tmo == 0 ||
+ device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
!= DMA_SUCCESS) {
dev_err(&device->pdev->dev,
"Self-test copy timed out, disabling\n");
@@ -1657,6 +1660,13 @@
" %d channels, device version 0x%02x, driver version %s\n",
device->common.chancnt, device->version, IOAT_DMA_VERSION);
+ if (!device->common.chancnt) {
+ dev_err(&device->pdev->dev,
+ "Intel(R) I/OAT DMA Engine problem found: "
+ "zero channels detected\n");
+ goto err_setup_interrupts;
+ }
+
err = ioat_dma_setup_interrupts(device);
if (err)
goto err_setup_interrupts;
@@ -1696,6 +1706,9 @@
struct dma_chan *chan, *_chan;
struct ioat_dma_chan *ioat_chan;
+ if (device->version != IOAT_VER_3_0)
+ cancel_delayed_work(&device->work);
+
ioat_dma_remove_interrupts(device);
dma_async_device_unregister(&device->common);
@@ -1707,10 +1720,6 @@
pci_release_regions(device->pdev);
pci_disable_device(device->pdev);
- if (device->version != IOAT_VER_3_0) {
- cancel_delayed_work(&device->work);
- }
-
list_for_each_entry_safe(chan, _chan,
&device->common.channels, device_node) {
ioat_chan = to_ioat_chan(chan);
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index a3306d0..a52ff4b 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -1,5 +1,5 @@
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -29,7 +29,7 @@
#include <linux/pci_ids.h>
#include <net/tcp.h>
-#define IOAT_DMA_VERSION "3.30"
+#define IOAT_DMA_VERSION "3.64"
enum ioat_interrupt {
none = 0,
@@ -135,12 +135,14 @@
#ifdef CONFIG_NET_DMA
switch (dev->version) {
case IOAT_VER_1_2:
- case IOAT_VER_3_0:
sysctl_tcp_dma_copybreak = 4096;
break;
case IOAT_VER_2_0:
sysctl_tcp_dma_copybreak = 2048;
break;
+ case IOAT_VER_3_0:
+ sysctl_tcp_dma_copybreak = 262144;
+ break;
}
#endif
}
diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h
index f1ae2c7..afa57ee 100644
--- a/drivers/dma/ioatdma_hw.h
+++ b/drivers/dma/ioatdma_hw.h
@@ -1,5 +1,5 @@
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h
index 827cb50..49bc277 100644
--- a/drivers/dma/ioatdma_registers.h
+++ b/drivers/dma/ioatdma_registers.h
@@ -1,5 +1,5 @@
/*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 647374a..16adbe6 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -928,19 +928,19 @@
for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
- if (!xor_srcs[src_idx])
- while (src_idx--) {
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
}
dest = alloc_page(GFP_KERNEL);
- if (!dest)
- while (src_idx--) {
+ if (!dest) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
/* Fill in src buffers */
for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 1f154d0..da781d1 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -729,7 +729,7 @@
ichan->status = IPU_CHANNEL_READY;
- spin_unlock_irqrestore(ipu->lock, flags);
+ spin_unlock_irqrestore(&ipu->lock, flags);
return 0;
}
@@ -1649,7 +1649,7 @@
}
/* Get IPU clock */
- ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+ ipu_data.ipu_clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(ipu_data.ipu_clk)) {
ret = PTR_ERR(ipu_data.ipu_clk);
goto err_clk_get;
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 5d5d5b3..cb7f26f 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1019,19 +1019,19 @@
for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
- if (!xor_srcs[src_idx])
- while (src_idx--) {
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
}
dest = alloc_page(GFP_KERNEL);
- if (!dest)
- while (src_idx--) {
+ if (!dest) {
+ while (src_idx--)
__free_page(xor_srcs[src_idx]);
- return -ENOMEM;
- }
+ return -ENOMEM;
+ }
/* Fill in src buffers */
for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 6dab63b..6d21b9e 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1105,7 +1105,7 @@
1024 * 1024,
MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
- DRM_INFO("MTRR allocation failed\n. Graphics "
+ DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 17fa408..d6cc986 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -279,7 +279,6 @@
u8 saveAR_INDEX;
u8 saveAR[21];
u8 saveDACMASK;
- u8 saveDACDATA[256*3]; /* 256 3-byte colors */
u8 saveCR[37];
struct {
@@ -457,6 +456,12 @@
/** for phy allocated objects */
struct drm_i915_gem_phys_object *phys_obj;
+
+ /**
+ * Used for checking the object doesn't appear more than once
+ * in an execbuffer object list.
+ */
+ int in_execbuffer;
};
/**
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 85685bf..37427e4 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1476,7 +1476,7 @@
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int regnum = obj_priv->fence_reg;
int tile_width;
- uint32_t val;
+ uint32_t fence_reg, val;
uint32_t pitch_val;
if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
@@ -1503,7 +1503,11 @@
val |= pitch_val << I830_FENCE_PITCH_SHIFT;
val |= I830_FENCE_REG_VALID;
- I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+ if (regnum < 8)
+ fence_reg = FENCE_REG_830_0 + (regnum * 4);
+ else
+ fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+ I915_WRITE(fence_reg, val);
}
static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
@@ -1557,7 +1561,8 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_i915_fence_reg *reg = NULL;
- int i, ret;
+ struct drm_i915_gem_object *old_obj_priv = NULL;
+ int i, ret, avail;
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
@@ -1580,25 +1585,46 @@
}
/* First try to find a free reg */
+try_again:
+ avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
if (!reg->obj)
break;
+
+ old_obj_priv = reg->obj->driver_private;
+ if (!old_obj_priv->pin_count)
+ avail++;
}
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- struct drm_i915_gem_object *old_obj_priv = NULL;
+ uint32_t seqno = dev_priv->mm.next_gem_seqno;
loff_t offset;
-try_again:
- /* Could try to use LRU here instead... */
+ if (avail == 0)
+ return -ENOMEM;
+
for (i = dev_priv->fence_reg_start;
i < dev_priv->num_fence_regs; i++) {
+ uint32_t this_seqno;
+
reg = &dev_priv->fence_regs[i];
old_obj_priv = reg->obj->driver_private;
- if (!old_obj_priv->pin_count)
+
+ if (old_obj_priv->pin_count)
+ continue;
+
+ /* i915 uses fences for GPU access to tiled buffers */
+ if (IS_I965G(dev) || !old_obj_priv->active)
break;
+
+ /* find the seqno of the first available fence */
+ this_seqno = old_obj_priv->last_rendering_seqno;
+ if (this_seqno != 0 &&
+ reg->obj->write_domain == 0 &&
+ i915_seqno_passed(seqno, this_seqno))
+ seqno = this_seqno;
}
/*
@@ -1606,15 +1632,25 @@
* objects to finish before trying again.
*/
if (i == dev_priv->num_fence_regs) {
- ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0);
- if (ret) {
- WARN(ret != -ERESTARTSYS,
- "switch to GTT domain failed: %d\n", ret);
- return ret;
+ if (seqno == dev_priv->mm.next_gem_seqno) {
+ i915_gem_flush(dev,
+ I915_GEM_GPU_DOMAINS,
+ I915_GEM_GPU_DOMAINS);
+ seqno = i915_add_request(dev,
+ I915_GEM_GPU_DOMAINS);
+ if (seqno == 0)
+ return -ENOMEM;
}
+
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
goto try_again;
}
+ BUG_ON(old_obj_priv->active ||
+ (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
@@ -1655,8 +1691,17 @@
if (IS_I965G(dev))
I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
- else
- I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+ else {
+ uint32_t fence_reg;
+
+ if (obj_priv->fence_reg < 8)
+ fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+ else
+ fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+ 8) * 4;
+
+ I915_WRITE(fence_reg, 0);
+ }
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
@@ -2469,6 +2514,7 @@
struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_gem_object **object_list = NULL;
struct drm_gem_object *batch_obj;
+ struct drm_i915_gem_object *obj_priv;
int ret, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains;
@@ -2533,6 +2579,15 @@
ret = -EBADF;
goto err;
}
+
+ obj_priv = object_list[i]->driver_private;
+ if (obj_priv->in_execbuffer) {
+ DRM_ERROR("Object %p appears more than once in object list\n",
+ object_list[i]);
+ ret = -EBADF;
+ goto err;
+ }
+ obj_priv->in_execbuffer = true;
}
/* Pin and relocate */
@@ -2674,8 +2729,13 @@
for (i = 0; i < pinned; i++)
i915_gem_object_unpin(object_list[i]);
- for (i = 0; i < args->buffer_count; i++)
+ for (i = 0; i < args->buffer_count; i++) {
+ if (object_list[i]) {
+ obj_priv = object_list[i]->driver_private;
+ obj_priv->in_execbuffer = false;
+ }
drm_gem_object_unreference(object_list[i]);
+ }
mutex_unlock(&dev->struct_mutex);
@@ -2712,17 +2772,24 @@
ret = i915_gem_object_bind_to_gtt(obj, alignment);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to bind: %d", ret);
+ DRM_ERROR("Failure to bind: %d\n", ret);
return ret;
}
- /*
- * Pre-965 chips need a fence register set up in order to
- * properly handle tiled surfaces.
- */
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE)
- i915_gem_object_get_fence_reg(obj, true);
+ }
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle tiled surfaces.
+ */
+ if (!IS_I965G(dev) &&
+ obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ obj_priv->tiling_mode != I915_TILING_NONE) {
+ ret = i915_gem_object_get_fence_reg(obj, true);
+ if (ret != 0) {
+ if (ret != -EBUSY && ret != -ERESTARTSYS)
+ DRM_ERROR("Failure to install fence: %d\n",
+ ret);
+ return ret;
+ }
}
obj_priv->pin_count++;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9d6539a..90600d8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -184,6 +184,7 @@
* Fence registers
*/
#define FENCE_REG_830_0 0x2000
+#define FENCE_REG_945_8 0x3000
#define I830_FENCE_START_MASK 0x07f80000
#define I830_FENCE_TILING_Y_SHIFT 12
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5d84027..d669cc2 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -119,11 +119,6 @@
/* VGA color palette registers */
dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
- /* DACCRX automatically increments during read */
- I915_WRITE8(VGA_DACRX, 0);
- /* Read 3 bytes of color data from each index */
- for (i = 0; i < 256 * 3; i++)
- dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
/* MSR bits */
dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
@@ -225,12 +220,6 @@
/* VGA color palette registers */
I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
- /* DACCRX automatically increments during read */
- I915_WRITE8(VGA_DACWX, 0);
- /* Read 3 bytes of color data from each index */
- for (i = 0; i < 256 * 3; i++)
- I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
-
}
int i915_save_state(struct drm_device *dev)
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 4940e4d..1f5b5d4 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -306,7 +306,7 @@
return 0;
bail:
file->private_data = NULL;
- kfree(list->hiddev);
+ kfree(list);
return res;
}
@@ -323,7 +323,7 @@
*/
static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t count, loff_t *ppos)
{
- DECLARE_WAITQUEUE(wait, current);
+ DEFINE_WAIT(wait);
struct hiddev_list *list = file->private_data;
int event_size;
int retval;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b84bf06..b4eea02 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -543,8 +543,8 @@
help
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
- MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
- MAX6681 sensor chips.
+ MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+ MAX6680, MAX6681 and MAX6692 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index e52b388..ad2b343 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -760,8 +760,11 @@
for (i = 0; i < offset_count; i++)
if ((x = abituguru3_read(data, bank, offset + i, count,
- buf + i * count)) != count)
- return i * count + (i && (x < 0)) ? 0 : x;
+ buf + i * count)) != count) {
+ if (x < 0)
+ return x;
+ return i * count + x;
+ }
return i * count;
}
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 1692de3..18a1ba8 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -617,7 +617,7 @@
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct f75375_data *data = i2c_get_clientdata(client);
+ struct f75375_data *data;
struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
int err;
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 95a99c5..9157247 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -213,7 +213,7 @@
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
((val)+500)/1000),-128,127))
-#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
#define PWM_TO_REG(val) ((val) >> 1)
#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
@@ -267,9 +267,9 @@
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[5]; /* Register values, possibly combined */
u16 fan_min[5]; /* Register values, possibly combined */
- u8 temp[3]; /* Register value */
- u8 temp_high[3]; /* Register value */
- u8 temp_low[3]; /* Register value */
+ s8 temp[3]; /* Register value */
+ s8 temp_high[3]; /* Register value */
+ s8 temp_low[3]; /* Register value */
u8 sensor; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cfc1ee9..b251d86 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -72,6 +72,7 @@
#define LM85_COMPANY_SMSC 0x5c
#define LM85_VERSTEP_VMASK 0xf0
#define LM85_VERSTEP_GENERIC 0x60
+#define LM85_VERSTEP_GENERIC2 0x70
#define LM85_VERSTEP_LM85C 0x60
#define LM85_VERSTEP_LM85B 0x62
#define LM85_VERSTEP_ADM1027 0x60
@@ -334,6 +335,7 @@
static const struct i2c_device_id lm85_id[] = {
{ "adm1027", adm1027 },
{ "adt7463", adt7463 },
+ { "adt7468", adt7468 },
{ "lm85", any_chip },
{ "lm85b", lm85b },
{ "lm85c", lm85c },
@@ -408,7 +410,8 @@
struct lm85_data *data = lm85_update_device(dev);
int vid;
- if (data->type == adt7463 && (data->vid & 0x80)) {
+ if ((data->type == adt7463 || data->type == adt7468) &&
+ (data->vid & 0x80)) {
/* 6-pin VID (VRM 10) */
vid = vid_from_reg(data->vid & 0x3f, data->vrm);
} else {
@@ -1153,7 +1156,8 @@
address, company, verstep);
/* All supported chips have the version in common */
- if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+ if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+ (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
dev_dbg(&adapter->dev, "Autodetection failed: "
"unsupported version\n");
return -ENODEV;
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 96a7018..1aff757 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -32,10 +32,10 @@
* supported by this driver. These chips lack the remote temperature
* offset feature.
*
- * This driver also supports the MAX6646, MAX6647 and MAX6649 chips
- * made by Maxim. These are again similar to the LM86, but they use
- * unsigned temperature values and can report temperatures from 0 to
- * 145 degrees.
+ * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
+ * MAX6692 chips made by Maxim. These are again similar to the LM86,
+ * but they use unsigned temperature values and can report temperatures
+ * from 0 to 145 degrees.
*
* This driver also supports the MAX6680 and MAX6681, two other sensor
* chips made by Maxim. These are quite similar to the other Maxim
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 9aefb5e..8679648 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -15,9 +15,9 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/system.h>
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index be8ee2c..ece0125 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -193,22 +193,24 @@
static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
{
- if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
- dev->iclk = clk_get(dev->dev, "i2c_ick");
- if (IS_ERR(dev->iclk)) {
- dev->iclk = NULL;
- return -ENODEV;
- }
+ int ret;
+
+ dev->iclk = clk_get(dev->dev, "ick");
+ if (IS_ERR(dev->iclk)) {
+ ret = PTR_ERR(dev->iclk);
+ dev->iclk = NULL;
+ return ret;
}
- dev->fclk = clk_get(dev->dev, "i2c_fck");
+ dev->fclk = clk_get(dev->dev, "fck");
if (IS_ERR(dev->fclk)) {
+ ret = PTR_ERR(dev->fclk);
if (dev->iclk != NULL) {
clk_put(dev->iclk);
dev->iclk = NULL;
}
dev->fclk = NULL;
- return -ENODEV;
+ return ret;
}
return 0;
@@ -218,18 +220,15 @@
{
clk_put(dev->fclk);
dev->fclk = NULL;
- if (dev->iclk != NULL) {
- clk_put(dev->iclk);
- dev->iclk = NULL;
- }
+ clk_put(dev->iclk);
+ dev->iclk = NULL;
}
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
WARN_ON(!dev->idle);
- if (dev->iclk != NULL)
- clk_enable(dev->iclk);
+ clk_enable(dev->iclk);
clk_enable(dev->fclk);
dev->idle = 0;
if (dev->iestate)
@@ -254,8 +253,7 @@
}
dev->idle = 1;
clk_disable(dev->fclk);
- if (dev->iclk != NULL)
- clk_disable(dev->iclk);
+ clk_disable(dev->iclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -312,15 +310,14 @@
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (cpu_class_is_omap1()) {
- struct clk *armxor_ck;
+ /*
+ * The I2C functional clock is the armxor_ck, so there's
+ * no need to get "armxor_ck" separately. Now, if OMAP2420
+ * always returns 12MHz for the functional clock, we can
+ * do this bit unconditionally.
+ */
+ fclk_rate = clk_get_rate(dev->fclk);
- armxor_ck = clk_get(NULL, "armxor_ck");
- if (IS_ERR(armxor_ck))
- dev_warn(dev->dev, "Could not get armxor_ck\n");
- else {
- fclk_rate = clk_get_rate(armxor_ck);
- clk_put(armxor_ck);
- }
/* TRM for 5912 says the I2C clock must be prescaled to be
* between 7 - 12 MHz. The XOR input clock is typically
* 12, 13 or 19.2 MHz. So we should have code that produces:
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index 4678bab..fede619 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -102,7 +102,13 @@
i2c->algo = i2c_versatile_algo;
i2c->algo.data = i2c;
- ret = i2c_bit_add_bus(&i2c->adap);
+ if (dev->id >= 0) {
+ /* static bus numbering */
+ i2c->adap.nr = dev->id;
+ ret = i2c_bit_add_numbered_bus(&i2c->adap);
+ } else
+ /* dynamic bus numbering */
+ ret = i2c_bit_add_bus(&i2c->adap);
if (ret >= 0) {
platform_set_drvdata(dev, i2c);
return 0;
@@ -146,7 +152,7 @@
platform_driver_unregister(&i2c_versatile_driver);
}
-module_init(i2c_versatile_init);
+subsys_initcall(i2c_versatile_init);
module_exit(i2c_versatile_exit);
MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e072903..5ea3bfa 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -721,6 +721,11 @@
depends on SOC_TX4939
select BLK_DEV_IDEDMA_SFF
+config BLK_DEV_IDE_AT91
+ tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+ depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+ select IDE_TIMINGS
+
config IDE_ARM
tristate "ARM IDE support"
depends on ARM && (ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index d0e3d7d..1c326d9 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -116,3 +116,4 @@
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
new file mode 100644
index 0000000..1bb50f4
--- /dev/null
+++ b/drivers/ide/at91_ide.c
@@ -0,0 +1,467 @@
+/*
+ * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+ * with Compact Flash True IDE logic
+ *
+ * Copyright (c) 2008, 2009 Kelvatek Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ide.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define DRV_NAME "at91_ide"
+
+#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+
+/*
+ * Access to IDE device is possible through EBI Static Memory Controller
+ * with Compact Flash logic. For details see EBI and SMC datasheet sections
+ * of any microcontroller from AT91SAM9 family.
+ *
+ * Within SMC chip select address space, lines A[23:21] distinguish Compact
+ * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+ * 0x00c0000 - True IDE
+ * 0x00e0000 - Alternate True IDE (Alt Status Register)
+ *
+ * On True IDE mode Task File and Data Register are mapped at the same address.
+ * To distinguish access between these two different bus data width is used:
+ * 8Bit for Task File, 16Bit for Data I/O.
+ *
+ * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+ * only inside IDE callback routines which are serialized by IDE layer,
+ * so no additional locking needed.
+ */
+
+#define TASK_FILE 0x00c00000
+#define ALT_MODE 0x00e00000
+#define REGS_SIZE 8
+
+#define enter_16bit(cs, mode) do { \
+ mode = at91_sys_read(AT91_SMC_MODE(cs)); \
+ at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
+} while (0)
+
+#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+
+static void set_smc_timings(const u8 chipselect, const u16 cycle,
+ const u16 setup, const u16 pulse,
+ const u16 data_float, int use_iordy)
+{
+ unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_BAT_SELECT;
+
+ /* disable or enable waiting for IORDY signal */
+ if (use_iordy)
+ mode |= AT91_SMC_EXNWMODE_READY;
+
+ /* add data float cycles if needed */
+ if (data_float)
+ mode |= AT91_SMC_TDF_(data_float);
+
+ at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+
+ /* setup timings in SMC */
+ at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+ AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(setup) |
+ AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+ AT91_SMC_NCS_WRPULSE_(cycle) |
+ AT91_SMC_NRDPULSE_(pulse) |
+ AT91_SMC_NCS_RDPULSE_(cycle));
+ at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+ AT91_SMC_NRDCYCLE_(cycle));
+}
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+ u64 tmp = ns;
+
+ tmp *= mck_hz;
+ tmp += 1000*1000*1000 - 1; /* round up */
+ do_div(tmp, 1000*1000*1000);
+ return (unsigned int) tmp;
+}
+
+static void apply_timings(const u8 chipselect, const u8 pio,
+ const struct ide_timing *timing, int use_iordy)
+{
+ unsigned int t0, t1, t2, t6z;
+ unsigned int cycle, setup, pulse, data_float;
+ unsigned int mck_hz;
+ struct clk *mck;
+
+ /* see table 22 of Compact Flash standard 4.1 for the meaning,
+ * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+ * assure at least minimal recovery (t2i) time */
+ t0 = timing->cyc8b;
+ t1 = timing->setup;
+ t2 = timing->act8b;
+ t6z = (pio < 5) ? 30 : 20;
+
+ pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+
+ mck = clk_get(NULL, "mck");
+ BUG_ON(IS_ERR(mck));
+ mck_hz = clk_get_rate(mck);
+ pdbg("mck_hz=%u\n", mck_hz);
+
+ cycle = calc_mck_cycles(t0, mck_hz);
+ setup = calc_mck_cycles(t1, mck_hz);
+ pulse = calc_mck_cycles(t2, mck_hz);
+ data_float = calc_mck_cycles(t6z, mck_hz);
+
+ pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+ cycle, setup, pulse, data_float);
+
+ set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+}
+
+static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ u8 chipselect = hwif->select_data;
+ unsigned long mode;
+
+ pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+ len++;
+
+ enter_16bit(chipselect, mode);
+ __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+ leave_16bit(chipselect, mode);
+}
+
+static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+ void *buf, unsigned int len)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ u8 chipselect = hwif->select_data;
+ unsigned long mode;
+
+ pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+ enter_16bit(chipselect, mode);
+ __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+ leave_16bit(chipselect, mode);
+}
+
+static u8 ide_mm_inb(unsigned long port)
+{
+ return readb((void __iomem *) port);
+}
+
+static void ide_mm_outb(u8 value, unsigned long port)
+{
+ writeb(value, (void __iomem *) port);
+}
+
+static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+ if (task->tf_flags & IDE_TFLAG_FLAGGED)
+ HIHI = 0xFF;
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+ u16 data = (tf->hob_data << 8) | tf->data;
+
+ at91_ide_output_data(drive, NULL, &data, 2);
+ }
+
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+ ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+ ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+ ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+ ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+ ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ ide_mm_outb(tf->feature, io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+ ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+ ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+ ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+ ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+
+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+ ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+}
+
+static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ struct ide_taskfile *tf = &task->tf;
+
+ if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+ u16 data;
+
+ at91_ide_input_data(drive, NULL, &data, 2);
+ tf->data = data & 0xff;
+ tf->hob_data = (data >> 8) & 0xff;
+ }
+
+ /* be sure we're looking at the low order bits */
+ ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+ tf->feature = ide_mm_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+ tf->nsect = ide_mm_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+ tf->lbal = ide_mm_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+ tf->lbam = ide_mm_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+ tf->lbah = ide_mm_inb(io_ports->lbah_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+ tf->device = ide_mm_inb(io_ports->device_addr);
+
+ if (task->tf_flags & IDE_TFLAG_LBA48) {
+ ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+ tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+ tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+ tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+ tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr);
+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+ tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr);
+ }
+}
+
+static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ struct ide_timing *timing;
+ u8 chipselect = drive->hwif->select_data;
+ int use_iordy = 0;
+
+ pdbg("chipselect %u pio %u\n", chipselect, pio);
+
+ timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+ BUG_ON(!timing);
+
+ if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+ !(ata_id_is_cfa(drive->id) && pio > 4))
+ use_iordy = 1;
+
+ apply_timings(chipselect, pio, timing, use_iordy);
+}
+
+static const struct ide_tp_ops at91_ide_tp_ops = {
+ .exec_command = ide_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .set_irq = ide_set_irq,
+
+ .tf_load = at91_ide_tf_load,
+ .tf_read = at91_ide_tf_read,
+
+ .input_data = at91_ide_input_data,
+ .output_data = at91_ide_output_data,
+};
+
+static const struct ide_port_ops at91_ide_port_ops = {
+ .set_pio_mode = at91_ide_set_pio_mode,
+};
+
+static const struct ide_port_info at91_ide_port_info __initdata = {
+ .port_ops = &at91_ide_port_ops,
+ .tp_ops = &at91_ide_tp_ops,
+ .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+ IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+ .pio_mask = ATA_PIO5,
+};
+
+/*
+ * If interrupt is delivered through GPIO, IRQ are triggered on falling
+ * and rising edge of signal. Whereas IDE device request interrupt on high
+ * level (rising edge in our case). This mean we have fake interrupts, so
+ * we need to check interrupt pin and exit instantly from ISR when line
+ * is on low level.
+ */
+
+irqreturn_t at91_irq_handler(int irq, void *dev_id)
+{
+ int ntries = 8;
+ int pin_val1, pin_val2;
+
+ /* additional deglitch, line can be noisy in badly designed PCB */
+ do {
+ pin_val1 = at91_get_gpio_value(irq);
+ pin_val2 = at91_get_gpio_value(irq);
+ } while (pin_val1 != pin_val2 && --ntries > 0);
+
+ if (pin_val1 == 0 || ntries <= 0)
+ return IRQ_HANDLED;
+
+ return ide_intr(irq, dev_id);
+}
+
+static int __init at91_ide_probe(struct platform_device *pdev)
+{
+ int ret;
+ hw_regs_t hw;
+ hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+ struct ide_host *host;
+ struct resource *res;
+ unsigned long tf_base = 0, ctl_base = 0;
+ struct at91_cf_data *board = pdev->dev.platform_data;
+
+ if (!board)
+ return -ENODEV;
+
+ if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+ perr("no device detected\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ perr("can't get memory resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+ REGS_SIZE, "ide") ||
+ !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+ REGS_SIZE, "alt")) {
+ perr("memory resources in use\n");
+ return -EBUSY;
+ }
+
+ pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+ board->irq_pin, (unsigned long) res->start);
+
+ tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+ REGS_SIZE);
+ ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+ REGS_SIZE);
+ if (!tf_base || !ctl_base) {
+ perr("can't map memory regions\n");
+ return -EBUSY;
+ }
+
+ memset(&hw, 0, sizeof(hw));
+
+ if (board->flags & AT91_IDE_SWAP_A0_A2) {
+ /* workaround for stupid hardware bug */
+ hw.io_ports.data_addr = tf_base + 0;
+ hw.io_ports.error_addr = tf_base + 4;
+ hw.io_ports.nsect_addr = tf_base + 2;
+ hw.io_ports.lbal_addr = tf_base + 6;
+ hw.io_ports.lbam_addr = tf_base + 1;
+ hw.io_ports.lbah_addr = tf_base + 5;
+ hw.io_ports.device_addr = tf_base + 3;
+ hw.io_ports.command_addr = tf_base + 7;
+ hw.io_ports.ctl_addr = ctl_base + 3;
+ } else
+ ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+
+ hw.irq = board->irq_pin;
+ hw.chipset = ide_generic;
+ hw.dev = &pdev->dev;
+
+ host = ide_host_alloc(&at91_ide_port_info, hws);
+ if (!host) {
+ perr("failed to allocate ide host\n");
+ return -ENOMEM;
+ }
+
+ /* setup Static Memory Controller - PIO 0 as default */
+ apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+
+ /* with GPIO interrupt we have to do quirks in handler */
+ if (board->irq_pin >= PIN_BASE)
+ host->irq_handler = at91_irq_handler;
+
+ host->ports[0]->select_data = board->chipselect;
+
+ ret = ide_host_register(host, &at91_ide_port_info, hws);
+ if (ret) {
+ perr("failed to register ide host\n");
+ goto err_free_host;
+ }
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+err_free_host:
+ ide_host_free(host);
+ return ret;
+}
+
+static int __exit at91_ide_remove(struct platform_device *pdev)
+{
+ struct ide_host *host = platform_get_drvdata(pdev);
+
+ ide_host_remove(host);
+ return 0;
+}
+
+static struct platform_driver at91_ide_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(at91_ide_remove),
+};
+
+static int __init at91_ide_init(void)
+{
+ return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+}
+
+static void __exit at91_ide_exit(void)
+{
+ platform_driver_unregister(&at91_ide_driver);
+}
+
+module_init(at91_ide_init);
+module_exit(at91_ide_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index e96c012..e9d042d 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -140,6 +140,12 @@
rq->cmd_flags |= REQ_PREEMPT;
rq->buffer = (char *)pc;
rq->rq_disk = disk;
+
+ if (pc->req_xfer) {
+ rq->data = pc->buf;
+ rq->data_len = pc->req_xfer;
+ }
+
memcpy(rq->cmd, pc->c, 12);
if (drive->media == ide_tape)
rq->cmd[13] = REQ_IDETAPE_PC1;
@@ -159,6 +165,12 @@
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->buffer = (char *)pc;
+
+ if (pc->req_xfer) {
+ rq->data = pc->buf;
+ rq->data_len = pc->req_xfer;
+ }
+
memcpy(rq->cmd, pc->c, 12);
if (drive->media == ide_tape)
rq->cmd[13] = REQ_IDETAPE_PC1;
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
index 1146f42..1f86dcb 100644
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -125,5 +125,5 @@
IDE_PROC_DEVSET(multcount, 0, 16),
IDE_PROC_DEVSET(nowerr, 0, 1),
IDE_PROC_DEVSET(wcache, 0, 1),
- { 0 },
+ { NULL },
};
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 72ebab0..059c90b 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -128,6 +128,7 @@
{
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
+ int i;
ide_map_sg(drive, rq);
@@ -136,8 +137,13 @@
else
hwif->sg_dma_direction = DMA_TO_DEVICE;
- return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
- hwif->sg_dma_direction);
+ i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
+ if (i) {
+ hwif->orig_sg_nents = hwif->sg_nents;
+ hwif->sg_nents = i;
+ }
+
+ return i;
}
EXPORT_SYMBOL_GPL(ide_build_sglist);
@@ -156,7 +162,7 @@
{
ide_hwif_t *hwif = drive->hwif;
- dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
+ dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents,
hwif->sg_dma_direction);
}
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 3eab1c6..317ec62 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -327,8 +327,10 @@
return ide_stopped;
}
- ide_init_sg_cmd(drive, rq);
- ide_map_sg(drive, rq);
+ if (blk_fs_request(rq) || pc->req_xfer) {
+ ide_init_sg_cmd(drive, rq);
+ ide_map_sg(drive, rq);
+ }
pc->sg = hwif->sg_table;
pc->sg_cnt = hwif->sg_nents;
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
index 3ec762c..fcd4d81 100644
--- a/drivers/ide/ide-floppy_proc.c
+++ b/drivers/ide/ide-floppy_proc.c
@@ -29,5 +29,5 @@
IDE_PROC_DEVSET(bios_head, 0, 255),
IDE_PROC_DEVSET(bios_sect, 0, 63),
IDE_PROC_DEVSET(ticks, 0, 255),
- { 0 },
+ { NULL },
};
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9ee51ad..a9a6c20 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -908,7 +908,7 @@
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
unsigned long flags;
- unsigned long wait = -1;
+ int wait = -1;
int plug_device = 0;
spin_lock_irqsave(&hwif->lock, flags);
@@ -1162,6 +1162,7 @@
return irq_ret;
}
+EXPORT_SYMBOL_GPL(ide_intr);
/**
* ide_do_drive_cmd - issue IDE special command
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 753b92e..b1892bd 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -315,6 +315,8 @@
u8 io_32bit = drive->io_32bit;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ len++;
+
if (io_32bit) {
unsigned long uninitialized_var(flags);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index ce0818a..ee8e3e7 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -950,6 +950,7 @@
static int init_irq (ide_hwif_t *hwif)
{
struct ide_io_ports *io_ports = &hwif->io_ports;
+ irq_handler_t irq_handler;
int sa = 0;
mutex_lock(&ide_cfg_mtx);
@@ -959,6 +960,10 @@
hwif->timer.function = &ide_timer_expiry;
hwif->timer.data = (unsigned long)hwif;
+ irq_handler = hwif->host->irq_handler;
+ if (irq_handler == NULL)
+ irq_handler = ide_intr;
+
#if defined(__mc68000__)
sa = IRQF_SHARED;
#endif /* __mc68000__ */
@@ -969,7 +974,7 @@
if (io_ports->ctl_addr)
hwif->tp_ops->set_irq(hwif, 1);
- if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+ if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
goto out_up;
if (!hwif->rqsize) {
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 1d8978b..a7b9287 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -231,7 +231,7 @@
IDE_PROC_DEVSET(pio_mode, 0, 255),
IDE_PROC_DEVSET(unmaskirq, 0, 1),
IDE_PROC_DEVSET(using_dma, 0, 1),
- { 0 },
+ { NULL },
};
static void proc_ide_settings_warn(void)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index bb450a7..4e6181c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2166,7 +2166,7 @@
__IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
__IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
mulf_tdsc, divf_tdsc),
- { 0 },
+ { NULL },
};
#endif
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index a01b448..4a65b96 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2490,12 +2490,14 @@
int ret = 0;
struct nes_vnic *nesvnic;
struct nes_device *nesdev;
+ struct nes_ib_device *nesibdev;
nesvnic = to_nesvnic(nesqp->ibqp.device);
if (!nesvnic)
return -EINVAL;
nesdev = nesvnic->nesdev;
+ nesibdev = nesvnic->nesibdev;
nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
atomic_read(&nesvnic->netdev->refcnt));
@@ -2507,6 +2509,8 @@
} else {
/* Need to free the Last Streaming Mode Message */
if (nesqp->ietf_frame) {
+ if (nesqp->lsmm_mr)
+ nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr);
pci_free_consistent(nesdev->pcidev,
nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
nesqp->ietf_frame, nesqp->ietf_frame_pbase);
@@ -2543,6 +2547,12 @@
u32 crc_value;
int ret;
int passive_state;
+ struct nes_ib_device *nesibdev;
+ struct ib_mr *ibmr = NULL;
+ struct ib_phys_buf ibphysbuf;
+ struct nes_pd *nespd;
+
+
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
if (!ibqp)
@@ -2601,6 +2611,26 @@
if (cm_id->remote_addr.sin_addr.s_addr !=
cm_id->local_addr.sin_addr.s_addr) {
u64temp = (unsigned long)nesqp;
+ nesibdev = nesvnic->nesibdev;
+ nespd = nesqp->nespd;
+ ibphysbuf.addr = nesqp->ietf_frame_pbase;
+ ibphysbuf.size = conn_param->private_data_len +
+ sizeof(struct ietf_mpa_frame);
+ ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
+ &ibphysbuf, 1,
+ IB_ACCESS_LOCAL_WRITE,
+ (u64 *)&nesqp->ietf_frame);
+ if (!ibmr) {
+ nes_debug(NES_DBG_CM, "Unable to register memory region"
+ "for lSMM for cm_node = %p \n",
+ cm_node);
+ return -ENOMEM;
+ }
+
+ ibmr->pd = &nespd->ibpd;
+ ibmr->device = nespd->ibpd.device;
+ nesqp->lsmm_mr = ibmr;
+
u64temp |= NES_SW_CONTEXT_ALIGN>>1;
set_wqe_64bit_value(wqe->wqe_words,
NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
@@ -2611,14 +2641,13 @@
wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
cpu_to_le32(conn_param->private_data_len +
sizeof(struct ietf_mpa_frame));
- wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
- cpu_to_le32((u32)nesqp->ietf_frame_pbase);
- wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
- cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+ set_wqe_64bit_value(wqe->wqe_words,
+ NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
+ (u64)nesqp->ietf_frame);
wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
cpu_to_le32(conn_param->private_data_len +
sizeof(struct ietf_mpa_frame));
- wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+ wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey;
nesqp->nesqp_context->ird_ord_sizes |=
cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 4fdb7245..d93a656 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1360,8 +1360,10 @@
NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT);
nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size <<
NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT);
+ if (!udata) {
nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN);
nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN);
+ }
nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number +
((u32)nesqp->nesrcq->hw_cq.cq_number << 16));
u64temp = (u64)nesqp->hwqp.sq_pbase;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index 6c6b4da..ae0ca9b 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -134,6 +134,7 @@
struct ietf_mpa_frame *ietf_frame;
dma_addr_t ietf_frame_pbase;
wait_queue_head_t state_waitq;
+ struct ib_mr *lsmm_mr;
unsigned long socket;
struct nes_hw_qp hwqp;
struct work_struct work;
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index abb04c8..634af6a 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -21,8 +21,6 @@
#include <linux/slab.h>
#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <asm/hardware/scoop.h>
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 9d1781a..1396742 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -21,8 +21,6 @@
#include <linux/slab.h>
#include <mach/spitz.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#define KB_ROWS 7
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 56c079e..272dedd 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -22,10 +22,10 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/input.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/io.h>
#include <asm/hardware/iomd.h>
MODULE_AUTHOR("Vojtech Pavlik, Russell King");
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 7f36edd3..ed045c9 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -33,10 +33,10 @@
#include <linux/serio.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/hardware/iomd.h>
#include <asm/system.h>
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 3fb51b5..94a1919 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -21,7 +21,6 @@
#include <mach/sharpsl.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 18dd8aa..831ddce 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -46,6 +46,9 @@
/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
#define IF_WRITEBUF 264
+/* interrupt pipe message size according to ibid. ch. 2.2 */
+#define IP_MSGSIZE 3
+
/* Values for the Gigaset 307x */
#define USB_GIGA_VENDOR_ID 0x0681
#define USB_3070_PRODUCT_ID 0x0001
@@ -110,7 +113,7 @@
unsigned char *rcvbuf; /* AT reply receive buffer */
struct urb *urb_int_in; /* URB for interrupt pipe */
- unsigned char int_in_buf[3];
+ unsigned char *int_in_buf;
spinlock_t lock; /* locks all following */
int basstate; /* bitmap (BS_*) */
@@ -657,7 +660,7 @@
}
/* drop incomplete packets even if the missing bytes wouldn't matter */
- if (unlikely(urb->actual_length < 3)) {
+ if (unlikely(urb->actual_length < IP_MSGSIZE)) {
dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
urb->actual_length);
goto resubmit;
@@ -2127,6 +2130,7 @@
static void gigaset_freecshw(struct cardstate *cs)
{
/* timers, URBs and rcvbuf are disposed of in disconnect */
+ kfree(cs->hw.bas->int_in_buf);
kfree(cs->hw.bas);
cs->hw.bas = NULL;
}
@@ -2140,6 +2144,12 @@
pr_err("out of memory\n");
return 0;
}
+ ucs->int_in_buf = kmalloc(IP_MSGSIZE, GFP_KERNEL);
+ if (!ucs->int_in_buf) {
+ kfree(ucs);
+ pr_err("out of memory\n");
+ return 0;
+ }
ucs->urb_cmd_in = NULL;
ucs->urb_cmd_out = NULL;
@@ -2292,7 +2302,7 @@
usb_fill_int_urb(ucs->urb_int_in, udev,
usb_rcvintpipe(udev,
(endpoint->bEndpointAddress) & 0x0f),
- ucs->int_in_buf, 3, read_int_callback, cs,
+ ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
endpoint->bInterval);
if ((rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL)) != 0) {
dev_err(cs->dev, "could not submit interrupt URB: %s\n",
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index b4d44e5..8132533 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -212,6 +212,9 @@
hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
}
+/* An extern declaration inside a C file is bad form. Don't do it. */
+extern void lguest_setup_irq(unsigned int irq);
+
/* This routine finds the first virtqueue described in the configuration of
* this device and sets it up.
*
@@ -266,6 +269,9 @@
goto unmap;
}
+ /* Make sure the interrupt is allocated. */
+ lguest_setup_irq(lvq->config.irq);
+
/* Tell the interrupt for this virtqueue to go to the virtio_ring
* interrupt handler. */
/* FIXME: We used to have a flag for the Host to tell us we could use
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 35bda49..bfefd07 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -60,6 +60,7 @@
};
struct dm_crypt_request {
+ struct convert_context *ctx;
struct scatterlist sg_in;
struct scatterlist sg_out;
};
@@ -335,6 +336,18 @@
init_completion(&ctx->restart);
}
+static struct dm_crypt_request *dmreq_of_req(struct crypt_config *cc,
+ struct ablkcipher_request *req)
+{
+ return (struct dm_crypt_request *)((char *)req + cc->dmreq_start);
+}
+
+static struct ablkcipher_request *req_of_dmreq(struct crypt_config *cc,
+ struct dm_crypt_request *dmreq)
+{
+ return (struct ablkcipher_request *)((char *)dmreq - cc->dmreq_start);
+}
+
static int crypt_convert_block(struct crypt_config *cc,
struct convert_context *ctx,
struct ablkcipher_request *req)
@@ -345,10 +358,11 @@
u8 *iv;
int r = 0;
- dmreq = (struct dm_crypt_request *)((char *)req + cc->dmreq_start);
+ dmreq = dmreq_of_req(cc, req);
iv = (u8 *)ALIGN((unsigned long)(dmreq + 1),
crypto_ablkcipher_alignmask(cc->tfm) + 1);
+ dmreq->ctx = ctx;
sg_init_table(&dmreq->sg_in, 1);
sg_set_page(&dmreq->sg_in, bv_in->bv_page, 1 << SECTOR_SHIFT,
bv_in->bv_offset + ctx->offset_in);
@@ -395,8 +409,9 @@
cc->req = mempool_alloc(cc->req_pool, GFP_NOIO);
ablkcipher_request_set_tfm(cc->req, cc->tfm);
ablkcipher_request_set_callback(cc->req, CRYPTO_TFM_REQ_MAY_BACKLOG |
- CRYPTO_TFM_REQ_MAY_SLEEP,
- kcryptd_async_done, ctx);
+ CRYPTO_TFM_REQ_MAY_SLEEP,
+ kcryptd_async_done,
+ dmreq_of_req(cc, cc->req));
}
/*
@@ -553,19 +568,22 @@
static void crypt_dec_pending(struct dm_crypt_io *io)
{
struct crypt_config *cc = io->target->private;
+ struct bio *base_bio = io->base_bio;
+ struct dm_crypt_io *base_io = io->base_io;
+ int error = io->error;
if (!atomic_dec_and_test(&io->pending))
return;
- if (likely(!io->base_io))
- bio_endio(io->base_bio, io->error);
- else {
- if (io->error && !io->base_io->error)
- io->base_io->error = io->error;
- crypt_dec_pending(io->base_io);
- }
-
mempool_free(io, cc->io_pool);
+
+ if (likely(!base_io))
+ bio_endio(base_bio, error);
+ else {
+ if (error && !base_io->error)
+ base_io->error = error;
+ crypt_dec_pending(base_io);
+ }
}
/*
@@ -821,7 +839,8 @@
static void kcryptd_async_done(struct crypto_async_request *async_req,
int error)
{
- struct convert_context *ctx = async_req->data;
+ struct dm_crypt_request *dmreq = async_req->data;
+ struct convert_context *ctx = dmreq->ctx;
struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx);
struct crypt_config *cc = io->target->private;
@@ -830,7 +849,7 @@
return;
}
- mempool_free(ablkcipher_request_cast(async_req), cc->req_pool);
+ mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool);
if (!atomic_dec_and_test(&ctx->pending))
return;
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index f14813b..36e2b5e 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -292,6 +292,8 @@
(PAGE_SIZE >> SECTOR_SHIFT));
num_bvecs = 1 + min_t(int, bio_get_nr_vecs(where->bdev),
num_bvecs);
+ if (unlikely(num_bvecs > BIO_MAX_PAGES))
+ num_bvecs = BIO_MAX_PAGES;
bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios);
bio->bi_sector = where->sector + (where->count - remaining);
bio->bi_bdev = where->bdev;
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 54d0588..f010965 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -704,7 +704,8 @@
char *new_name = (char *) param + param->data_start;
if (new_name < param->data ||
- invalid_str(new_name, (void *) param + param_size)) {
+ invalid_str(new_name, (void *) param + param_size) ||
+ strlen(new_name) > DM_NAME_LEN - 1) {
DMWARN("Invalid new logical volume name supplied.");
return -EINVAL;
}
@@ -1063,7 +1064,7 @@
r = populate_table(t, param, param_size);
if (r) {
- dm_table_put(t);
+ dm_table_destroy(t);
goto out;
}
@@ -1071,7 +1072,7 @@
hc = dm_get_mdptr(md);
if (!hc || hc->md != md) {
DMWARN("device has been removed from the dev hash table.");
- dm_table_put(t);
+ dm_table_destroy(t);
up_write(&_hash_lock);
r = -ENXIO;
goto out;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 51ba1db..8d40f27 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -525,9 +525,12 @@
static void dec_pending(struct dm_io *io, int error)
{
unsigned long flags;
+ int io_error;
+ struct bio *bio;
+ struct mapped_device *md = io->md;
/* Push-back supersedes any I/O errors */
- if (error && !(io->error > 0 && __noflush_suspending(io->md)))
+ if (error && !(io->error > 0 && __noflush_suspending(md)))
io->error = error;
if (atomic_dec_and_test(&io->io_count)) {
@@ -537,24 +540,27 @@
* This must be handled before the sleeper on
* suspend queue merges the pushback list.
*/
- spin_lock_irqsave(&io->md->pushback_lock, flags);
- if (__noflush_suspending(io->md))
- bio_list_add(&io->md->pushback, io->bio);
+ spin_lock_irqsave(&md->pushback_lock, flags);
+ if (__noflush_suspending(md))
+ bio_list_add(&md->pushback, io->bio);
else
/* noflush suspend was interrupted. */
io->error = -EIO;
- spin_unlock_irqrestore(&io->md->pushback_lock, flags);
+ spin_unlock_irqrestore(&md->pushback_lock, flags);
}
end_io_acct(io);
- if (io->error != DM_ENDIO_REQUEUE) {
- trace_block_bio_complete(io->md->queue, io->bio);
+ io_error = io->error;
+ bio = io->bio;
- bio_endio(io->bio, io->error);
+ free_io(md, io);
+
+ if (io_error != DM_ENDIO_REQUEUE) {
+ trace_block_bio_complete(md->queue, bio);
+
+ bio_endio(bio, io_error);
}
-
- free_io(io->md, io);
}
}
@@ -562,6 +568,7 @@
{
int r = 0;
struct dm_target_io *tio = bio->bi_private;
+ struct dm_io *io = tio->io;
struct mapped_device *md = tio->io->md;
dm_endio_fn endio = tio->ti->type->end_io;
@@ -585,15 +592,14 @@
}
}
- dec_pending(tio->io, error);
-
/*
* Store md for cleanup instead of tio which is about to get freed.
*/
bio->bi_private = md->bs;
- bio_put(bio);
free_tio(md, tio);
+ bio_put(bio);
+ dec_pending(io, error);
}
static sector_t max_io_len(struct mapped_device *md,
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03b4cd0..a307f87 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -214,12 +214,7 @@
return mddev;
}
-static void mddev_delayed_delete(struct work_struct *ws)
-{
- mddev_t *mddev = container_of(ws, mddev_t, del_work);
- kobject_del(&mddev->kobj);
- kobject_put(&mddev->kobj);
-}
+static void mddev_delayed_delete(struct work_struct *ws);
static void mddev_put(mddev_t *mddev)
{
@@ -3542,6 +3537,21 @@
int mdp_major = 0;
+static void mddev_delayed_delete(struct work_struct *ws)
+{
+ mddev_t *mddev = container_of(ws, mddev_t, del_work);
+
+ if (mddev->private == &md_redundancy_group) {
+ sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+ if (mddev->sysfs_action)
+ sysfs_put(mddev->sysfs_action);
+ mddev->sysfs_action = NULL;
+ mddev->private = NULL;
+ }
+ kobject_del(&mddev->kobj);
+ kobject_put(&mddev->kobj);
+}
+
static int md_alloc(dev_t dev, char *name)
{
static DEFINE_MUTEX(disks_mutex);
@@ -4033,13 +4043,9 @@
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->unplug_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
- if (mddev->pers->sync_request) {
- sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
- if (mddev->sysfs_action)
- sysfs_put(mddev->sysfs_action);
- mddev->sysfs_action = NULL;
- }
module_put(mddev->pers->owner);
+ if (mddev->pers->sync_request)
+ mddev->private = &md_redundancy_group;
mddev->pers = NULL;
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index 29e8f15..fec1d77 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1683,7 +1683,7 @@
static int dst_get_tuning_algo(struct dvb_frontend *fe)
{
- return dst_algo;
+ return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
}
static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 8434077..8dcb3fb 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1290,9 +1290,6 @@
dprintk("%s() Finalised property cache\n", __func__);
dtv_property_cache_submit(fe);
- /* Request the search algorithm to search */
- fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-
r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND,
&fepriv->parameters);
break;
@@ -1717,6 +1714,10 @@
fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;
fepriv->state = FESTATE_RETUNE;
+
+ /* Request the search algorithm to search */
+ fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
+
dvb_frontend_wakeup(fe);
dvb_frontend_add_event(fe, 0);
fepriv->status = 0;
diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c
index a67d177..2da55ec 100644
--- a/drivers/media/dvb/frontends/stb0899_algo.c
+++ b/drivers/media/dvb/frontends/stb0899_algo.c
@@ -156,7 +156,7 @@
}
if (range > 0)
- internal->sub_range = MIN(internal->srch_range, range);
+ internal->sub_range = min(internal->srch_range, range);
else
internal->sub_range = 0;
@@ -185,7 +185,7 @@
timing = stb0899_read_reg(state, STB0899_RTF);
if (lock >= 42) {
- if ((lock > 48) && (ABS(timing) >= 110)) {
+ if ((lock > 48) && (abs(timing) >= 110)) {
internal->status = ANALOGCARRIER;
dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !");
} else {
@@ -222,7 +222,7 @@
index++;
derot_freq += index * internal->direction * derot_step; /* next derot zig zag position */
- if (ABS(derot_freq) > derot_limit)
+ if (abs(derot_freq) > derot_limit)
next_loop--;
if (next_loop) {
@@ -298,7 +298,7 @@
last_derot_freq = derot_freq;
derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
- if(ABS(derot_freq) > derot_limit)
+ if(abs(derot_freq) > derot_limit)
next_loop--;
if (next_loop) {
@@ -400,7 +400,7 @@
if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
derot_freq += index * internal->direction * derot_step; /* next zig zag derotator position */
- if (ABS(derot_freq) > derot_limit)
+ if (abs(derot_freq) > derot_limit)
next_loop--;
if (next_loop) {
@@ -467,7 +467,7 @@
if (internal->sub_dir > 0) {
old_sub_range = internal->sub_range;
- internal->sub_range = MIN((internal->srch_range / 2) -
+ internal->sub_range = min((internal->srch_range / 2) -
(internal->tuner_offst + internal->sub_range / 2),
internal->sub_range);
@@ -771,7 +771,7 @@
int i;
i = 0;
- while ((1 << i) <= ABS(number))
+ while ((1 << i) <= abs(number))
i++;
if (number == 0)
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index 10613ac..a04c782 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -794,7 +794,7 @@
reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
old_state = reg;
/* set to burst mode */
- STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x02);
+ STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03);
STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01);
stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
switch (burst) {
diff --git a/drivers/media/dvb/frontends/stb0899_priv.h b/drivers/media/dvb/frontends/stb0899_priv.h
index 24619e3..82395b9 100644
--- a/drivers/media/dvb/frontends/stb0899_priv.h
+++ b/drivers/media/dvb/frontends/stb0899_priv.h
@@ -59,10 +59,6 @@
#define MAKEWORD32(a, b, c, d) (((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
#define MAKEWORD16(a, b) (((a) << 8) | (b))
-#define MIN(x, y) ((x) <= (y) ? (x) : (y))
-#define MAX(x, y) ((x) >= (y) ? (x) : (y))
-#define ABS(x) ((x) >= 0 ? (x) : -(x))
-
#define LSB(x) ((x & 0xff))
#define MSB(y) ((y >> 8) & 0xff)
@@ -168,10 +164,10 @@
u32 freq; /* Demod internal Frequency */
u32 srate; /* Demod internal Symbol rate */
enum stb0899_fec fecrate; /* Demod internal FEC rate */
- u32 srch_range; /* Demod internal Search Range */
- u32 sub_range; /* Demod current sub range (Hz) */
- u32 tuner_step; /* Tuner step (Hz) */
- u32 tuner_offst; /* Relative offset to carrier (Hz) */
+ s32 srch_range; /* Demod internal Search Range */
+ s32 sub_range; /* Demod current sub range (Hz) */
+ s32 tuner_step; /* Tuner step (Hz) */
+ s32 tuner_offst; /* Relative offset to carrier (Hz) */
u32 tuner_bw; /* Current bandwidth of the tuner (Hz) */
s32 mclk; /* Masterclock Divider factor (binary) */
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index ff39275..1ed5a7d 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -427,11 +427,11 @@
status->refclock = 27000000; /* Hz */
status->iqsense = 1;
status->bandwidth = 36000; /* kHz */
- state->bandwidth = status->bandwidth * 1000; /* MHz */
+ state->bandwidth = status->bandwidth * 1000; /* Hz */
state->reference = status->refclock / 1000; /* kHz */
/* Set default bandwidth. */
- return stb6100_set_bandwidth(fe, status->bandwidth);
+ return stb6100_set_bandwidth(fe, state->bandwidth);
}
static int stb6100_get_state(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
index 170720b..b150ed3 100644
--- a/drivers/media/dvb/frontends/zl10353.c
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -590,7 +590,7 @@
struct zl10353_state *state = fe->demodulator_priv;
u8 val = 0x0a;
- if (state->config.no_tuner) {
+ if (state->config.disable_i2c_gate_ctrl) {
/* No tuner attached to the internal I2C bus */
/* If set enable I2C bridge, the main I2C bus stopped hardly */
return 0;
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
index fdbb88f..2287bac 100644
--- a/drivers/media/dvb/frontends/zl10353.h
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -38,6 +38,9 @@
/* set if parallel ts output is required */
int parallel_ts;
+
+ /* set if i2c_gate_ctrl disable is required */
+ u8 disable_i2c_gate_ctrl:1;
};
#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index e564a61..48892b5 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -102,7 +102,11 @@
}
/* Test some registers, but we don't know their exact meaning yet */
- if (m5602_read_sensor(sd, 0x00, prod_id, sizeof(prod_id)))
+ if (m5602_read_sensor(sd, 0x00, prod_id, 2))
+ return -ENODEV;
+ if (m5602_read_sensor(sd, 0x02, prod_id+2, 2))
+ return -ENODEV;
+ if (m5602_read_sensor(sd, 0x04, prod_id+4, 2))
return -ENODEV;
if (memcmp(prod_id, expected_prod_id, sizeof(prod_id)))
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 73eb656..805faae 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -80,17 +80,17 @@
{
int rval = 0;
- cam->fck = clk_get(cam->dev, "cam_fck");
+ cam->fck = clk_get(cam->dev, "fck");
if (IS_ERR(cam->fck)) {
- dev_err(cam->dev, "can't get cam_fck");
+ dev_err(cam->dev, "can't get camera fck");
rval = PTR_ERR(cam->fck);
omap24xxcam_clock_put(cam);
return rval;
}
- cam->ick = clk_get(cam->dev, "cam_ick");
+ cam->ick = clk_get(cam->dev, "ick");
if (IS_ERR(cam->ick)) {
- dev_err(cam->dev, "can't get cam_ick");
+ dev_err(cam->dev, "can't get camera ick");
rval = PTR_ERR(cam->ick);
omap24xxcam_clock_put(cam);
}
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 07c334f..0c4ce58 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -35,7 +35,6 @@
#include <linux/videodev2.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
#include <mach/camera.h>
#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 0776ecf..b5370b3 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -860,6 +860,7 @@
.demod_address = 0x1e>>1,
.no_tuner = 1,
.parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
};
/* ==================================================================
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 5aeccb3..076ed5b 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -54,7 +54,7 @@
/* ---------------------------------------------------------------------- */
/* our structs */
-#define MAXREGS 64
+#define MAXREGS 256
struct CHIPSTATE;
typedef int (*getvalue)(int);
diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig
index 4ea5fa7..8666e19 100644
--- a/drivers/media/video/zoran/Kconfig
+++ b/drivers/media/video/zoran/Kconfig
@@ -68,6 +68,7 @@
tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
help
Support for the AverMedia 6 Eyes video surveillance card.
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 84d5ea1..b457a05 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1383,6 +1383,11 @@
wm8350->power.rev_g_coeff = 1;
break;
+ case 1:
+ dev_info(wm8350->dev, "WM8351 Rev B\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
default:
dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
ret = -ENODEV;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 9c50e6f..34ce270 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -248,12 +248,15 @@
sg_init_one(&sg, data_buf, len);
- /*
- * The spec states that CSR and CID accesses have a timeout
- * of 64 clock cycles.
- */
- data.timeout_ns = 0;
- data.timeout_clks = 64;
+ if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+ /*
+ * The spec states that CSR and CID accesses have a timeout
+ * of 64 clock cycles.
+ */
+ data.timeout_ns = 0;
+ data.timeout_clks = 64;
+ } else
+ mmc_set_data_timeout(&data, card);
mmc_wait_for_req(host, &mrq);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 2909bbc..a663429 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -490,7 +490,7 @@
mod_timer(&host->timer, jiffies + HZ);
}
-static int mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, void *id)
{
struct mmc_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
@@ -633,7 +633,7 @@
return ret;
}
-static int mmci_remove(struct amba_device *dev)
+static int __devexit mmci_remove(struct amba_device *dev)
{
struct mmc_host *mmc = amba_get_drvdata(dev);
@@ -730,7 +730,7 @@
.name = DRIVER_NAME,
},
.probe = mmci_probe,
- .remove = mmci_remove,
+ .remove = __devexit_p(mmci_remove),
.suspend = mmci_suspend,
.resume = mmci_resume,
.id_table = mmci_ids,
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index dda0be4..b4a615c 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -42,7 +42,7 @@
#define HAS_DMA
#endif
-#define DRIVER_NAME "imx-mmc"
+#define DRIVER_NAME "mxc-mmc"
#define MMC_REG_STR_STP_CLK 0x00
#define MMC_REG_STATUS 0x04
@@ -707,7 +707,7 @@
host->res = r;
host->irq = irq;
- host->clk = clk_get(&pdev->dev, "sdhc_clk");
+ host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
goto out_iounmap;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 67d7b7f..5570849 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1460,18 +1460,12 @@
if (!host->virt_base)
goto err_ioremap;
- if (cpu_is_omap24xx()) {
- host->iclk = clk_get(&pdev->dev, "mmc_ick");
- if (IS_ERR(host->iclk))
- goto err_free_mmc_host;
- clk_enable(host->iclk);
- }
+ host->iclk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(host->iclk))
+ goto err_free_mmc_host;
+ clk_enable(host->iclk);
- if (!cpu_is_omap24xx())
- host->fclk = clk_get(&pdev->dev, "mmc_ck");
- else
- host->fclk = clk_get(&pdev->dev, "mmc_fck");
-
+ host->fclk = clk_get(&pdev->dev, "fck");
if (IS_ERR(host->fclk)) {
ret = PTR_ERR(host->fclk);
goto err_free_iclk;
@@ -1536,10 +1530,10 @@
if (host->pdata->cleanup)
host->pdata->cleanup(&pdev->dev);
- if (host->iclk && !IS_ERR(host->iclk))
- clk_put(host->iclk);
- if (host->fclk && !IS_ERR(host->fclk))
- clk_put(host->fclk);
+ mmc_omap_fclk_enable(host, 0);
+ clk_put(host->fclk);
+ clk_disable(host->iclk);
+ clk_put(host->iclk);
iounmap(host->virt_base);
release_mem_region(pdev->resource[0].start,
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index a631c81..3916a56 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -956,13 +956,13 @@
sema_init(&host->sem, 1);
- host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+ host->iclk = clk_get(&pdev->dev, "ick");
if (IS_ERR(host->iclk)) {
ret = PTR_ERR(host->iclk);
host->iclk = NULL;
goto err1;
}
- host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+ host->fclk = clk_get(&pdev->dev, "fck");
if (IS_ERR(host->fclk)) {
ret = PTR_ERR(host->fclk);
host->fclk = NULL;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9702ad3..4300957 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,9 +30,8 @@
#include <asm/sizes.h>
-#include <mach/dma.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/mmc.h>
#include "pxamci.h"
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index f4a67c6..2db166b 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -793,8 +793,7 @@
host->mem->start + host->sdidata);
if (!setup_ok) {
- s3c2410_dma_config(host->dma, 4,
- (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+ s3c2410_dma_config(host->dma, 4, 0);
s3c2410_dma_set_buffdone_fn(host->dma,
s3cmci_dma_done_callback);
s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index bc33200..6fde0a2 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -120,13 +120,6 @@
doesn't have access to, memory beyond the mem=xxx limit, nvram,
memory on the video card, etc...
-config MTD_PS3VRAM
- tristate "PS3 video RAM"
- depends on FB_PS3
- help
- This driver allows you to use excess PS3 video RAM as volatile
- storage or system swap.
-
config MTD_LART
tristate "28F160xx flash driver for LART"
depends on SA1100_LART
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index e51521d..0993d5c 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,4 +16,3 @@
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
-obj-$(CONFIG_MTD_PS3VRAM) += ps3vram.o
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index d44f741..6d9f810 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -821,7 +821,8 @@
if (!(info->flags & IS_POW2PS))
return info;
}
- }
+ } else
+ return info;
}
}
diff --git a/drivers/mtd/devices/ps3vram.c b/drivers/mtd/devices/ps3vram.c
deleted file mode 100644
index d21e9be..0000000
--- a/drivers/mtd/devices/ps3vram.c
+++ /dev/null
@@ -1,768 +0,0 @@
-/**
- * ps3vram - Use extra PS3 video ram as MTD block device.
- *
- * Copyright (c) 2007-2008 Jim Paris <jim@jtan.com>
- * Added support RSX DMA Vivien Chappelier <vivien.chappelier@free.fr>
- */
-
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/slab.h>
-#include <linux/version.h>
-#include <linux/gfp.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-
-#include <asm/lv1call.h>
-#include <asm/ps3.h>
-
-#define DEVICE_NAME "ps3vram"
-
-#define XDR_BUF_SIZE (2 * 1024 * 1024) /* XDR buffer (must be 1MiB aligned) */
-#define XDR_IOIF 0x0c000000
-
-#define FIFO_BASE XDR_IOIF
-#define FIFO_SIZE (64 * 1024)
-
-#define DMA_PAGE_SIZE (4 * 1024)
-
-#define CACHE_PAGE_SIZE (256 * 1024)
-#define CACHE_PAGE_COUNT ((XDR_BUF_SIZE - FIFO_SIZE) / CACHE_PAGE_SIZE)
-
-#define CACHE_OFFSET CACHE_PAGE_SIZE
-#define FIFO_OFFSET 0
-
-#define CTRL_PUT 0x10
-#define CTRL_GET 0x11
-#define CTRL_TOP 0x15
-
-#define UPLOAD_SUBCH 1
-#define DOWNLOAD_SUBCH 2
-
-#define NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN 0x0000030c
-#define NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY 0x00000104
-
-#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601
-
-struct mtd_info ps3vram_mtd;
-
-#define CACHE_PAGE_PRESENT 1
-#define CACHE_PAGE_DIRTY 2
-
-struct ps3vram_tag {
- unsigned int address;
- unsigned int flags;
-};
-
-struct ps3vram_cache {
- unsigned int page_count;
- unsigned int page_size;
- struct ps3vram_tag *tags;
-};
-
-struct ps3vram_priv {
- u64 memory_handle;
- u64 context_handle;
- u32 *ctrl;
- u32 *reports;
- u8 __iomem *ddr_base;
- u8 *xdr_buf;
-
- u32 *fifo_base;
- u32 *fifo_ptr;
-
- struct device *dev;
- struct ps3vram_cache cache;
-
- /* Used to serialize cache/DMA operations */
- struct mutex lock;
-};
-
-#define DMA_NOTIFIER_HANDLE_BASE 0x66604200 /* first DMA notifier handle */
-#define DMA_NOTIFIER_OFFSET_BASE 0x1000 /* first DMA notifier offset */
-#define DMA_NOTIFIER_SIZE 0x40
-#define NOTIFIER 7 /* notifier used for completion report */
-
-/* A trailing '-' means to subtract off ps3fb_videomemory.size */
-char *size = "256M-";
-module_param(size, charp, 0);
-MODULE_PARM_DESC(size, "memory size");
-
-static u32 *ps3vram_get_notifier(u32 *reports, int notifier)
-{
- return (void *) reports +
- DMA_NOTIFIER_OFFSET_BASE +
- DMA_NOTIFIER_SIZE * notifier;
-}
-
-static void ps3vram_notifier_reset(struct mtd_info *mtd)
-{
- int i;
-
- struct ps3vram_priv *priv = mtd->priv;
- u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
- for (i = 0; i < 4; i++)
- notify[i] = 0xffffffff;
-}
-
-static int ps3vram_notifier_wait(struct mtd_info *mtd, unsigned int timeout_ms)
-{
- struct ps3vram_priv *priv = mtd->priv;
- u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
- unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
-
- do {
- if (!notify[3])
- return 0;
- msleep(1);
- } while (time_before(jiffies, timeout));
-
- return -ETIMEDOUT;
-}
-
-static void ps3vram_init_ring(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
- priv->ctrl[CTRL_GET] = FIFO_BASE + FIFO_OFFSET;
-}
-
-static int ps3vram_wait_ring(struct mtd_info *mtd, unsigned int timeout_ms)
-{
- struct ps3vram_priv *priv = mtd->priv;
- unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
-
- do {
- if (priv->ctrl[CTRL_PUT] == priv->ctrl[CTRL_GET])
- return 0;
- msleep(1);
- } while (time_before(jiffies, timeout));
-
- dev_dbg(priv->dev, "%s:%d: FIFO timeout (%08x/%08x/%08x)\n", __func__,
- __LINE__, priv->ctrl[CTRL_PUT], priv->ctrl[CTRL_GET],
- priv->ctrl[CTRL_TOP]);
-
- return -ETIMEDOUT;
-}
-
-static void ps3vram_out_ring(struct ps3vram_priv *priv, u32 data)
-{
- *(priv->fifo_ptr)++ = data;
-}
-
-static void ps3vram_begin_ring(struct ps3vram_priv *priv, u32 chan,
- u32 tag, u32 size)
-{
- ps3vram_out_ring(priv, (size << 18) | (chan << 13) | tag);
-}
-
-static void ps3vram_rewind_ring(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
- u64 status;
-
- ps3vram_out_ring(priv, 0x20000000 | (FIFO_BASE + FIFO_OFFSET));
-
- priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET;
-
- /* asking the HV for a blit will kick the fifo */
- status = lv1_gpu_context_attribute(priv->context_handle,
- L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
- 0, 0, 0, 0);
- if (status)
- dev_err(priv->dev, "%s:%d: lv1_gpu_context_attribute failed\n",
- __func__, __LINE__);
-
- priv->fifo_ptr = priv->fifo_base;
-}
-
-static void ps3vram_fire_ring(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
- u64 status;
-
- mutex_lock(&ps3_gpu_mutex);
-
- priv->ctrl[CTRL_PUT] = FIFO_BASE + FIFO_OFFSET +
- (priv->fifo_ptr - priv->fifo_base) * sizeof(u32);
-
- /* asking the HV for a blit will kick the fifo */
- status = lv1_gpu_context_attribute(priv->context_handle,
- L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT,
- 0, 0, 0, 0);
- if (status)
- dev_err(priv->dev, "%s:%d: lv1_gpu_context_attribute failed\n",
- __func__, __LINE__);
-
- if ((priv->fifo_ptr - priv->fifo_base) * sizeof(u32) >
- FIFO_SIZE - 1024) {
- dev_dbg(priv->dev, "%s:%d: fifo full, rewinding\n", __func__,
- __LINE__);
- ps3vram_wait_ring(mtd, 200);
- ps3vram_rewind_ring(mtd);
- }
-
- mutex_unlock(&ps3_gpu_mutex);
-}
-
-static void ps3vram_bind(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0, 1);
- ps3vram_out_ring(priv, 0x31337303);
- ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x180, 3);
- ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
- ps3vram_out_ring(priv, 0xfeed0001); /* DMA system RAM instance */
- ps3vram_out_ring(priv, 0xfeed0000); /* DMA video RAM instance */
-
- ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0, 1);
- ps3vram_out_ring(priv, 0x3137c0de);
- ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x180, 3);
- ps3vram_out_ring(priv, DMA_NOTIFIER_HANDLE_BASE + NOTIFIER);
- ps3vram_out_ring(priv, 0xfeed0000); /* DMA video RAM instance */
- ps3vram_out_ring(priv, 0xfeed0001); /* DMA system RAM instance */
-
- ps3vram_fire_ring(mtd);
-}
-
-static int ps3vram_upload(struct mtd_info *mtd, unsigned int src_offset,
- unsigned int dst_offset, int len, int count)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- ps3vram_begin_ring(priv, UPLOAD_SUBCH,
- NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
- ps3vram_out_ring(priv, XDR_IOIF + src_offset);
- ps3vram_out_ring(priv, dst_offset);
- ps3vram_out_ring(priv, len);
- ps3vram_out_ring(priv, len);
- ps3vram_out_ring(priv, len);
- ps3vram_out_ring(priv, count);
- ps3vram_out_ring(priv, (1 << 8) | 1);
- ps3vram_out_ring(priv, 0);
-
- ps3vram_notifier_reset(mtd);
- ps3vram_begin_ring(priv, UPLOAD_SUBCH,
- NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
- ps3vram_out_ring(priv, 0);
- ps3vram_begin_ring(priv, UPLOAD_SUBCH, 0x100, 1);
- ps3vram_out_ring(priv, 0);
- ps3vram_fire_ring(mtd);
- if (ps3vram_notifier_wait(mtd, 200) < 0) {
- dev_dbg(priv->dev, "%s:%d: notifier timeout\n", __func__,
- __LINE__);
- return -1;
- }
-
- return 0;
-}
-
-static int ps3vram_download(struct mtd_info *mtd, unsigned int src_offset,
- unsigned int dst_offset, int len, int count)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
- NV_MEMORY_TO_MEMORY_FORMAT_OFFSET_IN, 8);
- ps3vram_out_ring(priv, src_offset);
- ps3vram_out_ring(priv, XDR_IOIF + dst_offset);
- ps3vram_out_ring(priv, len);
- ps3vram_out_ring(priv, len);
- ps3vram_out_ring(priv, len);
- ps3vram_out_ring(priv, count);
- ps3vram_out_ring(priv, (1 << 8) | 1);
- ps3vram_out_ring(priv, 0);
-
- ps3vram_notifier_reset(mtd);
- ps3vram_begin_ring(priv, DOWNLOAD_SUBCH,
- NV_MEMORY_TO_MEMORY_FORMAT_NOTIFY, 1);
- ps3vram_out_ring(priv, 0);
- ps3vram_begin_ring(priv, DOWNLOAD_SUBCH, 0x100, 1);
- ps3vram_out_ring(priv, 0);
- ps3vram_fire_ring(mtd);
- if (ps3vram_notifier_wait(mtd, 200) < 0) {
- dev_dbg(priv->dev, "%s:%d: notifier timeout\n", __func__,
- __LINE__);
- return -1;
- }
-
- return 0;
-}
-
-static void ps3vram_cache_evict(struct mtd_info *mtd, int entry)
-{
- struct ps3vram_priv *priv = mtd->priv;
- struct ps3vram_cache *cache = &priv->cache;
-
- if (cache->tags[entry].flags & CACHE_PAGE_DIRTY) {
- dev_dbg(priv->dev, "%s:%d: flushing %d : 0x%08x\n", __func__,
- __LINE__, entry, cache->tags[entry].address);
- if (ps3vram_upload(mtd,
- CACHE_OFFSET + entry * cache->page_size,
- cache->tags[entry].address,
- DMA_PAGE_SIZE,
- cache->page_size / DMA_PAGE_SIZE) < 0) {
- dev_dbg(priv->dev, "%s:%d: failed to upload from "
- "0x%x to 0x%x size 0x%x\n", __func__, __LINE__,
- entry * cache->page_size,
- cache->tags[entry].address, cache->page_size);
- }
- cache->tags[entry].flags &= ~CACHE_PAGE_DIRTY;
- }
-}
-
-static void ps3vram_cache_load(struct mtd_info *mtd, int entry,
- unsigned int address)
-{
- struct ps3vram_priv *priv = mtd->priv;
- struct ps3vram_cache *cache = &priv->cache;
-
- dev_dbg(priv->dev, "%s:%d: fetching %d : 0x%08x\n", __func__, __LINE__,
- entry, address);
- if (ps3vram_download(mtd,
- address,
- CACHE_OFFSET + entry * cache->page_size,
- DMA_PAGE_SIZE,
- cache->page_size / DMA_PAGE_SIZE) < 0) {
- dev_err(priv->dev, "%s:%d: failed to download from "
- "0x%x to 0x%x size 0x%x\n", __func__, __LINE__, address,
- entry * cache->page_size, cache->page_size);
- }
-
- cache->tags[entry].address = address;
- cache->tags[entry].flags |= CACHE_PAGE_PRESENT;
-}
-
-
-static void ps3vram_cache_flush(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
- struct ps3vram_cache *cache = &priv->cache;
- int i;
-
- dev_dbg(priv->dev, "%s:%d: FLUSH\n", __func__, __LINE__);
- for (i = 0; i < cache->page_count; i++) {
- ps3vram_cache_evict(mtd, i);
- cache->tags[i].flags = 0;
- }
-}
-
-static unsigned int ps3vram_cache_match(struct mtd_info *mtd, loff_t address)
-{
- struct ps3vram_priv *priv = mtd->priv;
- struct ps3vram_cache *cache = &priv->cache;
- unsigned int base;
- unsigned int offset;
- int i;
- static int counter;
-
- offset = (unsigned int) (address & (cache->page_size - 1));
- base = (unsigned int) (address - offset);
-
- /* fully associative check */
- for (i = 0; i < cache->page_count; i++) {
- if ((cache->tags[i].flags & CACHE_PAGE_PRESENT) &&
- cache->tags[i].address == base) {
- dev_dbg(priv->dev, "%s:%d: found entry %d : 0x%08x\n",
- __func__, __LINE__, i, cache->tags[i].address);
- return i;
- }
- }
-
- /* choose a random entry */
- i = (jiffies + (counter++)) % cache->page_count;
- dev_dbg(priv->dev, "%s:%d: using entry %d\n", __func__, __LINE__, i);
-
- ps3vram_cache_evict(mtd, i);
- ps3vram_cache_load(mtd, i, base);
-
- return i;
-}
-
-static int ps3vram_cache_init(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- priv->cache.page_count = CACHE_PAGE_COUNT;
- priv->cache.page_size = CACHE_PAGE_SIZE;
- priv->cache.tags = kzalloc(sizeof(struct ps3vram_tag) *
- CACHE_PAGE_COUNT, GFP_KERNEL);
- if (priv->cache.tags == NULL) {
- dev_err(priv->dev, "%s:%d: could not allocate cache tags\n",
- __func__, __LINE__);
- return -ENOMEM;
- }
-
- dev_info(priv->dev, "created ram cache: %d entries, %d KiB each\n",
- CACHE_PAGE_COUNT, CACHE_PAGE_SIZE / 1024);
-
- return 0;
-}
-
-static void ps3vram_cache_cleanup(struct mtd_info *mtd)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- ps3vram_cache_flush(mtd);
- kfree(priv->cache.tags);
-}
-
-static int ps3vram_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
- struct ps3vram_priv *priv = mtd->priv;
-
- if (instr->addr + instr->len > mtd->size)
- return -EINVAL;
-
- mutex_lock(&priv->lock);
-
- ps3vram_cache_flush(mtd);
-
- /* Set bytes to 0xFF */
- memset_io(priv->ddr_base + instr->addr, 0xFF, instr->len);
-
- mutex_unlock(&priv->lock);
-
- instr->state = MTD_ERASE_DONE;
- mtd_erase_callback(instr);
-
- return 0;
-}
-
-static int ps3vram_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct ps3vram_priv *priv = mtd->priv;
- unsigned int cached, count;
-
- dev_dbg(priv->dev, "%s:%d: from=0x%08x len=0x%zx\n", __func__, __LINE__,
- (unsigned int)from, len);
-
- if (from >= mtd->size)
- return -EINVAL;
-
- if (len > mtd->size - from)
- len = mtd->size - from;
-
- /* Copy from vram to buf */
- count = len;
- while (count) {
- unsigned int offset, avail;
- unsigned int entry;
-
- offset = (unsigned int) (from & (priv->cache.page_size - 1));
- avail = priv->cache.page_size - offset;
-
- mutex_lock(&priv->lock);
-
- entry = ps3vram_cache_match(mtd, from);
- cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
-
- dev_dbg(priv->dev, "%s:%d: from=%08x cached=%08x offset=%08x "
- "avail=%08x count=%08x\n", __func__, __LINE__,
- (unsigned int)from, cached, offset, avail, count);
-
- if (avail > count)
- avail = count;
- memcpy(buf, priv->xdr_buf + cached, avail);
-
- mutex_unlock(&priv->lock);
-
- buf += avail;
- count -= avail;
- from += avail;
- }
-
- *retlen = len;
- return 0;
-}
-
-static int ps3vram_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct ps3vram_priv *priv = mtd->priv;
- unsigned int cached, count;
-
- if (to >= mtd->size)
- return -EINVAL;
-
- if (len > mtd->size - to)
- len = mtd->size - to;
-
- /* Copy from buf to vram */
- count = len;
- while (count) {
- unsigned int offset, avail;
- unsigned int entry;
-
- offset = (unsigned int) (to & (priv->cache.page_size - 1));
- avail = priv->cache.page_size - offset;
-
- mutex_lock(&priv->lock);
-
- entry = ps3vram_cache_match(mtd, to);
- cached = CACHE_OFFSET + entry * priv->cache.page_size + offset;
-
- dev_dbg(priv->dev, "%s:%d: to=%08x cached=%08x offset=%08x "
- "avail=%08x count=%08x\n", __func__, __LINE__,
- (unsigned int)to, cached, offset, avail, count);
-
- if (avail > count)
- avail = count;
- memcpy(priv->xdr_buf + cached, buf, avail);
-
- priv->cache.tags[entry].flags |= CACHE_PAGE_DIRTY;
-
- mutex_unlock(&priv->lock);
-
- buf += avail;
- count -= avail;
- to += avail;
- }
-
- *retlen = len;
- return 0;
-}
-
-static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev)
-{
- struct ps3vram_priv *priv;
- int status;
- u64 ddr_lpar;
- u64 ctrl_lpar;
- u64 info_lpar;
- u64 reports_lpar;
- u64 ddr_size;
- u64 reports_size;
- int ret = -ENOMEM;
- char *rest;
-
- ret = -EIO;
- ps3vram_mtd.priv = kzalloc(sizeof(struct ps3vram_priv), GFP_KERNEL);
- if (!ps3vram_mtd.priv)
- goto out;
- priv = ps3vram_mtd.priv;
-
- mutex_init(&priv->lock);
- priv->dev = &dev->core;
-
- /* Allocate XDR buffer (1MiB aligned) */
- priv->xdr_buf = (void *)__get_free_pages(GFP_KERNEL,
- get_order(XDR_BUF_SIZE));
- if (priv->xdr_buf == NULL) {
- dev_dbg(&dev->core, "%s:%d: could not allocate XDR buffer\n",
- __func__, __LINE__);
- ret = -ENOMEM;
- goto out_free_priv;
- }
-
- /* Put FIFO at begginning of XDR buffer */
- priv->fifo_base = (u32 *) (priv->xdr_buf + FIFO_OFFSET);
- priv->fifo_ptr = priv->fifo_base;
-
- /* XXX: Need to open GPU, in case ps3fb or snd_ps3 aren't loaded */
- if (ps3_open_hv_device(dev)) {
- dev_err(&dev->core, "%s:%d: ps3_open_hv_device failed\n",
- __func__, __LINE__);
- ret = -EAGAIN;
- goto out_close_gpu;
- }
-
- /* Request memory */
- status = -1;
- ddr_size = memparse(size, &rest);
- if (*rest == '-')
- ddr_size -= ps3fb_videomemory.size;
- ddr_size = ALIGN(ddr_size, 1024*1024);
- if (ddr_size <= 0) {
- dev_err(&dev->core, "%s:%d: specified size is too small\n",
- __func__, __LINE__);
- ret = -EINVAL;
- goto out_close_gpu;
- }
-
- while (ddr_size > 0) {
- status = lv1_gpu_memory_allocate(ddr_size, 0, 0, 0, 0,
- &priv->memory_handle,
- &ddr_lpar);
- if (!status)
- break;
- ddr_size -= 1024*1024;
- }
- if (status || ddr_size <= 0) {
- dev_err(&dev->core, "%s:%d: lv1_gpu_memory_allocate failed\n",
- __func__, __LINE__);
- ret = -ENOMEM;
- goto out_free_xdr_buf;
- }
-
- /* Request context */
- status = lv1_gpu_context_allocate(priv->memory_handle,
- 0,
- &priv->context_handle,
- &ctrl_lpar,
- &info_lpar,
- &reports_lpar,
- &reports_size);
- if (status) {
- dev_err(&dev->core, "%s:%d: lv1_gpu_context_allocate failed\n",
- __func__, __LINE__);
- ret = -ENOMEM;
- goto out_free_memory;
- }
-
- /* Map XDR buffer to RSX */
- status = lv1_gpu_context_iomap(priv->context_handle, XDR_IOIF,
- ps3_mm_phys_to_lpar(__pa(priv->xdr_buf)),
- XDR_BUF_SIZE, 0);
- if (status) {
- dev_err(&dev->core, "%s:%d: lv1_gpu_context_iomap failed\n",
- __func__, __LINE__);
- ret = -ENOMEM;
- goto out_free_context;
- }
-
- priv->ddr_base = ioremap_flags(ddr_lpar, ddr_size, _PAGE_NO_CACHE);
-
- if (!priv->ddr_base) {
- dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
- __LINE__);
- ret = -ENOMEM;
- goto out_free_context;
- }
-
- priv->ctrl = ioremap(ctrl_lpar, 64 * 1024);
- if (!priv->ctrl) {
- dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
- __LINE__);
- ret = -ENOMEM;
- goto out_unmap_vram;
- }
-
- priv->reports = ioremap(reports_lpar, reports_size);
- if (!priv->reports) {
- dev_err(&dev->core, "%s:%d: ioremap failed\n", __func__,
- __LINE__);
- ret = -ENOMEM;
- goto out_unmap_ctrl;
- }
-
- mutex_lock(&ps3_gpu_mutex);
- ps3vram_init_ring(&ps3vram_mtd);
- mutex_unlock(&ps3_gpu_mutex);
-
- ps3vram_mtd.name = "ps3vram";
- ps3vram_mtd.size = ddr_size;
- ps3vram_mtd.flags = MTD_CAP_RAM;
- ps3vram_mtd.erase = ps3vram_erase;
- ps3vram_mtd.point = NULL;
- ps3vram_mtd.unpoint = NULL;
- ps3vram_mtd.read = ps3vram_read;
- ps3vram_mtd.write = ps3vram_write;
- ps3vram_mtd.owner = THIS_MODULE;
- ps3vram_mtd.type = MTD_RAM;
- ps3vram_mtd.erasesize = CACHE_PAGE_SIZE;
- ps3vram_mtd.writesize = 1;
-
- ps3vram_bind(&ps3vram_mtd);
-
- mutex_lock(&ps3_gpu_mutex);
- ret = ps3vram_wait_ring(&ps3vram_mtd, 100);
- mutex_unlock(&ps3_gpu_mutex);
- if (ret < 0) {
- dev_err(&dev->core, "%s:%d: failed to initialize channels\n",
- __func__, __LINE__);
- ret = -ETIMEDOUT;
- goto out_unmap_reports;
- }
-
- ps3vram_cache_init(&ps3vram_mtd);
-
- if (add_mtd_device(&ps3vram_mtd)) {
- dev_err(&dev->core, "%s:%d: add_mtd_device failed\n",
- __func__, __LINE__);
- ret = -EAGAIN;
- goto out_cache_cleanup;
- }
-
- dev_info(&dev->core, "reserved %u MiB of gpu memory\n",
- (unsigned int)(ddr_size / 1024 / 1024));
-
- return 0;
-
-out_cache_cleanup:
- ps3vram_cache_cleanup(&ps3vram_mtd);
-out_unmap_reports:
- iounmap(priv->reports);
-out_unmap_ctrl:
- iounmap(priv->ctrl);
-out_unmap_vram:
- iounmap(priv->ddr_base);
-out_free_context:
- lv1_gpu_context_free(priv->context_handle);
-out_free_memory:
- lv1_gpu_memory_free(priv->memory_handle);
-out_close_gpu:
- ps3_close_hv_device(dev);
-out_free_xdr_buf:
- free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
-out_free_priv:
- kfree(ps3vram_mtd.priv);
- ps3vram_mtd.priv = NULL;
-out:
- return ret;
-}
-
-static int ps3vram_shutdown(struct ps3_system_bus_device *dev)
-{
- struct ps3vram_priv *priv;
-
- priv = ps3vram_mtd.priv;
-
- del_mtd_device(&ps3vram_mtd);
- ps3vram_cache_cleanup(&ps3vram_mtd);
- iounmap(priv->reports);
- iounmap(priv->ctrl);
- iounmap(priv->ddr_base);
- lv1_gpu_context_free(priv->context_handle);
- lv1_gpu_memory_free(priv->memory_handle);
- ps3_close_hv_device(dev);
- free_pages((unsigned long) priv->xdr_buf, get_order(XDR_BUF_SIZE));
- kfree(priv);
- return 0;
-}
-
-static struct ps3_system_bus_driver ps3vram_driver = {
- .match_id = PS3_MATCH_ID_GPU,
- .match_sub_id = PS3_MATCH_SUB_ID_GPU_RAMDISK,
- .core.name = DEVICE_NAME,
- .core.owner = THIS_MODULE,
- .probe = ps3vram_probe,
- .remove = ps3vram_shutdown,
- .shutdown = ps3vram_shutdown,
-};
-
-static int __init ps3vram_init(void)
-{
- return ps3_system_bus_driver_register(&ps3vram_driver);
-}
-
-static void __exit ps3vram_exit(void)
-{
- ps3_system_bus_driver_unregister(&ps3vram_driver);
-}
-
-module_init(ps3vram_init);
-module_exit(ps3vram_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jim Paris <jim@jtan.com>");
-MODULE_DESCRIPTION("MTD driver for PS3 video RAM");
-MODULE_ALIAS(PS3_MODULE_ALIAS_GPU_RAMDISK);
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index d2ec262..c9681a3 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -31,6 +31,7 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -38,7 +39,6 @@
#include <asm/mach/flash.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/system.h>
#ifdef CONFIG_ARCH_P720T
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 4b122e7..2297182 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -46,16 +46,19 @@
physmap_data = dev->dev.platform_data;
+ if (info->cmtd) {
#ifdef CONFIG_MTD_PARTITIONS
- if (info->nr_parts) {
- del_mtd_partitions(info->cmtd);
- kfree(info->parts);
- } else if (physmap_data->nr_parts)
- del_mtd_partitions(info->cmtd);
- else
- del_mtd_device(info->cmtd);
+ if (info->nr_parts || physmap_data->nr_parts)
+ del_mtd_partitions(info->cmtd);
+ else
+ del_mtd_device(info->cmtd);
#else
- del_mtd_device(info->cmtd);
+ del_mtd_device(info->cmtd);
+#endif
+ }
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts)
+ kfree(info->parts);
#endif
#ifdef CONFIG_MTD_CONCAT
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 6f6a0f6..8f57b6f 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/err.h>
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -19,7 +20,6 @@
#include <linux/mtd/concat.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index fa129c0..10081e6 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -26,8 +26,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 21fd4f1..bad048a 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -880,7 +880,7 @@
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
- host->clk = clk_get(&pdev->dev, "nfc_clk");
+ host->clk = clk_get(&pdev->dev, "nfc");
if (IS_ERR(host->clk))
goto eclk;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index cc55cbc..61b69cc4 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -22,7 +22,6 @@
#include <linux/irq.h>
#include <mach/dma.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa3xx_nand.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a2f185f..62d732a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1040,6 +1040,17 @@
To compile this driver as a module, choose M here. The module
will be called ni65.
+config DNET
+ tristate "Dave ethernet support (DNET)"
+ depends on NET_ETHERNET && HAS_IOMEM
+ select PHYLIB
+ help
+ The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+ Say Y to include support for the DNET chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dnet.
+
source "drivers/net/tulip/Kconfig"
config AT1700
@@ -2619,6 +2630,8 @@
source "drivers/net/sfc/Kconfig"
+source "drivers/net/benet/Kconfig"
+
endif # NETDEV_10000
source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index aca8492..471baaf 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -22,6 +22,7 @@
obj-$(CONFIG_TEHUTI) += tehuti.o
obj-$(CONFIG_ENIC) += enic/
obj-$(CONFIG_JME) += jme.o
+obj-$(CONFIG_BE2NET) += benet/
gianfar_driver-objs := gianfar.o \
gianfar_ethtool.o \
@@ -231,6 +232,7 @@
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
+obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index c2d012f..4bc6901 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -27,9 +27,9 @@
#include <linux/crc32.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/system.h>
#define TX_BUFFERS 15
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 5fce1d5..9cc4347 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -335,11 +335,20 @@
if (!(mdio_bus = mdiobus_alloc()))
return -ENOMEM;
- /* All MII PHY accesses use NPE-B Ethernet registers */
- spin_lock_init(&mdio_lock);
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+ if (cpu_is_ixp43x()) {
+ /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
+ return -ENOSYS;
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
+ } else {
+ /* All MII PHY accesses use NPE-B Ethernet registers */
+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
+ return -ENOSYS;
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+ }
+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+ spin_lock_init(&mdio_lock);
mdio_bus->name = "IXP4xx MII Bus";
mdio_bus->read = &ixp4xx_mdio_read;
mdio_bus->write = &ixp4xx_mdio_write;
@@ -1250,9 +1259,6 @@
static int __init eth_init_module(void)
{
int err;
- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
- return -ENOSYS;
-
if ((err = ixp4xx_mdio_register()))
return err;
return platform_driver_register(&ixp4xx_eth_driver);
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 1cf2f94..f3a1274 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -560,7 +560,7 @@
msleep(1);
}
- if (reset_timeout == 0) {
+ if (reset_timeout < 0) {
dev_crit(ksp->dev,
"Timeout waiting for DMA engines to reset\n");
/* And blithely carry on */
diff --git a/drivers/net/benet/Kconfig b/drivers/net/benet/Kconfig
new file mode 100644
index 0000000..c6934f1
--- /dev/null
+++ b/drivers/net/benet/Kconfig
@@ -0,0 +1,7 @@
+config BE2NET
+ tristate "ServerEngines' 10Gbps NIC - BladeEngine 2"
+ depends on PCI && INET
+ select INET_LRO
+ help
+ This driver implements the NIC functionality for ServerEngines'
+ 10Gbps network adapter - BladeEngine 2.
diff --git a/drivers/net/benet/Makefile b/drivers/net/benet/Makefile
new file mode 100644
index 0000000..a60cd80
--- /dev/null
+++ b/drivers/net/benet/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile to build the network driver for ServerEngine's BladeEngine.
+#
+
+obj-$(CONFIG_BE2NET) += be2net.o
+
+be2net-y := be_main.o be_cmds.o be_ethtool.o
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
new file mode 100644
index 0000000..f327be5
--- /dev/null
+++ b/drivers/net/benet/be.h
@@ -0,0 +1,328 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BE_H
+#define BE_H
+
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <linux/version.h>
+#include <linux/delay.h>
+#include <net/tcp.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/inet_lro.h>
+
+#include "be_hw.h"
+
+#define DRV_VER "2.0.348"
+#define DRV_NAME "be2net"
+#define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC"
+#define DRV_DESC BE_NAME "Driver"
+
+/* Number of bytes of an RX frame that are copied to skb->data */
+#define BE_HDR_LEN 64
+#define BE_MAX_JUMBO_FRAME_SIZE 9018
+#define BE_MIN_MTU 256
+
+#define BE_NUM_VLANS_SUPPORTED 64
+#define BE_MAX_EQD 96
+#define BE_MAX_TX_FRAG_COUNT 30
+
+#define EVNT_Q_LEN 1024
+#define TX_Q_LEN 2048
+#define TX_CQ_LEN 1024
+#define RX_Q_LEN 1024 /* Does not support any other value */
+#define RX_CQ_LEN 1024
+#define MCC_Q_LEN 64 /* total size not to exceed 8 pages */
+#define MCC_CQ_LEN 256
+
+#define BE_NAPI_WEIGHT 64
+#define MAX_RX_POST BE_NAPI_WEIGHT /* Frags posted at a time */
+#define RX_FRAGS_REFILL_WM (RX_Q_LEN - MAX_RX_POST)
+
+#define BE_MAX_LRO_DESCRIPTORS 16
+#define BE_MAX_FRAGS_PER_FRAME 16
+
+struct be_dma_mem {
+ void *va;
+ dma_addr_t dma;
+ u32 size;
+};
+
+struct be_queue_info {
+ struct be_dma_mem dma_mem;
+ u16 len;
+ u16 entry_size; /* Size of an element in the queue */
+ u16 id;
+ u16 tail, head;
+ bool created;
+ atomic_t used; /* Number of valid elements in the queue */
+};
+
+struct be_ctrl_info {
+ u8 __iomem *csr;
+ u8 __iomem *db; /* Door Bell */
+ u8 __iomem *pcicfg; /* PCI config space */
+ int pci_func;
+
+ /* Mbox used for cmd request/response */
+ spinlock_t cmd_lock; /* For serializing cmds to BE card */
+ struct be_dma_mem mbox_mem;
+ /* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+ * is stored for freeing purpose */
+ struct be_dma_mem mbox_mem_alloced;
+};
+
+#include "be_cmds.h"
+
+struct be_drvr_stats {
+ u32 be_tx_reqs; /* number of TX requests initiated */
+ u32 be_tx_stops; /* number of times TX Q was stopped */
+ u32 be_fwd_reqs; /* number of send reqs through forwarding i/f */
+ u32 be_tx_wrbs; /* number of tx WRBs used */
+ u32 be_tx_events; /* number of tx completion events */
+ u32 be_tx_compl; /* number of tx completion entries processed */
+ u64 be_tx_jiffies;
+ ulong be_tx_bytes;
+ ulong be_tx_bytes_prev;
+ u32 be_tx_rate;
+
+ u32 cache_barrier[16];
+
+ u32 be_ethrx_post_fail;/* number of ethrx buffer alloc failures */
+ u32 be_polls; /* number of times NAPI called poll function */
+ u32 be_rx_events; /* number of ucast rx completion events */
+ u32 be_rx_compl; /* number of rx completion entries processed */
+ u32 be_lro_hgram_data[8]; /* histogram of LRO data packets */
+ u32 be_lro_hgram_ack[8]; /* histogram of LRO ACKs */
+ u64 be_rx_jiffies;
+ ulong be_rx_bytes;
+ ulong be_rx_bytes_prev;
+ u32 be_rx_rate;
+ /* number of non ether type II frames dropped where
+ * frame len > length field of Mac Hdr */
+ u32 be_802_3_dropped_frames;
+ /* number of non ether type II frames malformed where
+ * in frame len < length field of Mac Hdr */
+ u32 be_802_3_malformed_frames;
+ u32 be_rxcp_err; /* Num rx completion entries w/ err set. */
+ ulong rx_fps_jiffies; /* jiffies at last FPS calc */
+ u32 be_rx_frags;
+ u32 be_prev_rx_frags;
+ u32 be_rx_fps; /* Rx frags per second */
+};
+
+struct be_stats_obj {
+ struct be_drvr_stats drvr_stats;
+ struct net_device_stats net_stats;
+ struct be_dma_mem cmd;
+};
+
+struct be_eq_obj {
+ struct be_queue_info q;
+ char desc[32];
+
+ /* Adaptive interrupt coalescing (AIC) info */
+ bool enable_aic;
+ u16 min_eqd; /* in usecs */
+ u16 max_eqd; /* in usecs */
+ u16 cur_eqd; /* in usecs */
+
+ struct napi_struct napi;
+};
+
+struct be_tx_obj {
+ struct be_queue_info q;
+ struct be_queue_info cq;
+ /* Remember the skbs that were transmitted */
+ struct sk_buff *sent_skb_list[TX_Q_LEN];
+};
+
+/* Struct to remember the pages posted for rx frags */
+struct be_rx_page_info {
+ struct page *page;
+ dma_addr_t bus;
+ u16 page_offset;
+ bool last_page_user;
+};
+
+struct be_rx_obj {
+ struct be_queue_info q;
+ struct be_queue_info cq;
+ struct be_rx_page_info page_info_tbl[RX_Q_LEN];
+ struct net_lro_mgr lro_mgr;
+ struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
+};
+
+#define BE_NUM_MSIX_VECTORS 2 /* 1 each for Tx and Rx */
+struct be_adapter {
+ struct pci_dev *pdev;
+ struct net_device *netdev;
+
+ /* Mbox, pci config, csr address information */
+ struct be_ctrl_info ctrl;
+
+ struct msix_entry msix_entries[BE_NUM_MSIX_VECTORS];
+ bool msix_enabled;
+ bool isr_registered;
+
+ /* TX Rings */
+ struct be_eq_obj tx_eq;
+ struct be_tx_obj tx_obj;
+
+ u32 cache_line_break[8];
+
+ /* Rx rings */
+ struct be_eq_obj rx_eq;
+ struct be_rx_obj rx_obj;
+ u32 big_page_size; /* Compounded page size shared by rx wrbs */
+ bool rx_post_starved; /* Zero rx frags have been posted to BE */
+
+ struct vlan_group *vlan_grp;
+ u16 num_vlans;
+ u8 vlan_tag[VLAN_GROUP_ARRAY_LEN];
+
+ struct be_stats_obj stats;
+ /* Work queue used to perform periodic tasks like getting statistics */
+ struct delayed_work work;
+
+ /* Ethtool knobs and info */
+ bool rx_csum; /* BE card must perform rx-checksumming */
+ u32 max_rx_coal;
+ char fw_ver[FW_VER_LEN];
+ u32 if_handle; /* Used to configure filtering */
+ u32 pmac_id; /* MAC addr handle used by BE card */
+
+ struct be_link_info link;
+ u32 port_num;
+};
+
+extern struct ethtool_ops be_ethtool_ops;
+
+#define drvr_stats(adapter) (&adapter->stats.drvr_stats)
+
+#define BE_SET_NETDEV_OPS(netdev, ops) (netdev->netdev_ops = ops)
+
+static inline u32 MODULO(u16 val, u16 limit)
+{
+ BUG_ON(limit & (limit - 1));
+ return val & (limit - 1);
+}
+
+static inline void index_adv(u16 *index, u16 val, u16 limit)
+{
+ *index = MODULO((*index + val), limit);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+ *index = MODULO((*index + 1), limit);
+}
+
+#define PAGE_SHIFT_4K 12
+#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
+
+/* Returns number of pages spanned by the data starting at the given addr */
+#define PAGES_4K_SPANNED(_address, size) \
+ ((u32)((((size_t)(_address) & (PAGE_SIZE_4K - 1)) + \
+ (size) + (PAGE_SIZE_4K - 1)) >> PAGE_SHIFT_4K))
+
+/* Byte offset into the page corresponding to given address */
+#define OFFSET_IN_PAGE(addr) \
+ ((size_t)(addr) & (PAGE_SIZE_4K-1))
+
+/* Returns bit offset within a DWORD of a bitfield */
+#define AMAP_BIT_OFFSET(_struct, field) \
+ (((size_t)&(((_struct *)0)->field))%32)
+
+/* Returns the bit mask of the field that is NOT shifted into location. */
+static inline u32 amap_mask(u32 bitsize)
+{
+ return (bitsize == 32 ? 0xFFFFFFFF : (1 << bitsize) - 1);
+}
+
+static inline void
+amap_set(void *ptr, u32 dw_offset, u32 mask, u32 offset, u32 value)
+{
+ u32 *dw = (u32 *) ptr + dw_offset;
+ *dw &= ~(mask << offset);
+ *dw |= (mask & value) << offset;
+}
+
+#define AMAP_SET_BITS(_struct, field, ptr, val) \
+ amap_set(ptr, \
+ offsetof(_struct, field)/32, \
+ amap_mask(sizeof(((_struct *)0)->field)), \
+ AMAP_BIT_OFFSET(_struct, field), \
+ val)
+
+static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
+{
+ u32 *dw = (u32 *) ptr;
+ return mask & (*(dw + dw_offset) >> offset);
+}
+
+#define AMAP_GET_BITS(_struct, field, ptr) \
+ amap_get(ptr, \
+ offsetof(_struct, field)/32, \
+ amap_mask(sizeof(((_struct *)0)->field)), \
+ AMAP_BIT_OFFSET(_struct, field))
+
+#define be_dws_cpu_to_le(wrb, len) swap_dws(wrb, len)
+#define be_dws_le_to_cpu(wrb, len) swap_dws(wrb, len)
+static inline void swap_dws(void *wrb, int len)
+{
+#ifdef __BIG_ENDIAN
+ u32 *dw = wrb;
+ BUG_ON(len % 4);
+ do {
+ *dw = cpu_to_le32(*dw);
+ dw++;
+ len -= 4;
+ } while (len);
+#endif /* __BIG_ENDIAN */
+}
+
+static inline u8 is_tcp_pkt(struct sk_buff *skb)
+{
+ u8 val = 0;
+
+ if (ip_hdr(skb)->version == 4)
+ val = (ip_hdr(skb)->protocol == IPPROTO_TCP);
+ else if (ip_hdr(skb)->version == 6)
+ val = (ipv6_hdr(skb)->nexthdr == NEXTHDR_TCP);
+
+ return val;
+}
+
+static inline u8 is_udp_pkt(struct sk_buff *skb)
+{
+ u8 val = 0;
+
+ if (ip_hdr(skb)->version == 4)
+ val = (ip_hdr(skb)->protocol == IPPROTO_UDP);
+ else if (ip_hdr(skb)->version == 6)
+ val = (ipv6_hdr(skb)->nexthdr == NEXTHDR_UDP);
+
+ return val;
+}
+
+#endif /* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
new file mode 100644
index 0000000..d444aed
--- /dev/null
+++ b/drivers/net/benet/be_cmds.c
@@ -0,0 +1,861 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+
+static int be_mbox_db_ready_wait(void __iomem *db)
+{
+ int cnt = 0, wait = 5;
+ u32 ready;
+
+ do {
+ ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
+ if (ready)
+ break;
+
+ if (cnt > 200000) {
+ printk(KERN_WARNING DRV_NAME
+ ": mbox_db poll timed out\n");
+ return -1;
+ }
+
+ if (cnt > 50)
+ wait = 200;
+ cnt += wait;
+ udelay(wait);
+ } while (true);
+
+ return 0;
+}
+
+/*
+ * Insert the mailbox address into the doorbell in two steps
+ */
+static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
+{
+ int status;
+ u16 compl_status, extd_status;
+ u32 val = 0;
+ void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+ struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
+ struct be_mcc_mailbox *mbox = mbox_mem->va;
+ struct be_mcc_cq_entry *cqe = &mbox->cqe;
+
+ memset(cqe, 0, sizeof(*cqe));
+
+ val &= ~MPU_MAILBOX_DB_RDY_MASK;
+ val |= MPU_MAILBOX_DB_HI_MASK;
+ /* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
+ val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
+ iowrite32(val, db);
+
+ /* wait for ready to be set */
+ status = be_mbox_db_ready_wait(db);
+ if (status != 0)
+ return status;
+
+ val = 0;
+ val &= ~MPU_MAILBOX_DB_RDY_MASK;
+ val &= ~MPU_MAILBOX_DB_HI_MASK;
+ /* at bits 2 - 31 place mbox dma addr lsb bits 4 - 33 */
+ val |= (u32)(mbox_mem->dma >> 4) << 2;
+ iowrite32(val, db);
+
+ status = be_mbox_db_ready_wait(db);
+ if (status != 0)
+ return status;
+
+ /* compl entry has been made now */
+ be_dws_le_to_cpu(cqe, sizeof(*cqe));
+ if (!(cqe->flags & CQE_FLAGS_VALID_MASK)) {
+ printk(KERN_WARNING DRV_NAME ": ERROR invalid mbox compl\n");
+ return -1;
+ }
+
+ compl_status = (cqe->status >> CQE_STATUS_COMPL_SHIFT) &
+ CQE_STATUS_COMPL_MASK;
+ if (compl_status != MCC_STATUS_SUCCESS) {
+ extd_status = (cqe->status >> CQE_STATUS_EXTD_SHIFT) &
+ CQE_STATUS_EXTD_MASK;
+ printk(KERN_WARNING DRV_NAME
+ ": ERROR in cmd compl. status(compl/extd)=%d/%d\n",
+ compl_status, extd_status);
+ }
+
+ return compl_status;
+}
+
+static int be_POST_stage_get(struct be_ctrl_info *ctrl, u16 *stage)
+{
+ u32 sem = ioread32(ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+
+ *stage = sem & EP_SEMAPHORE_POST_STAGE_MASK;
+ if ((sem >> EP_SEMAPHORE_POST_ERR_SHIFT) & EP_SEMAPHORE_POST_ERR_MASK)
+ return -1;
+ else
+ return 0;
+}
+
+static int be_POST_stage_poll(struct be_ctrl_info *ctrl, u16 poll_stage)
+{
+ u16 stage, cnt, error;
+ for (cnt = 0; cnt < 5000; cnt++) {
+ error = be_POST_stage_get(ctrl, &stage);
+ if (error)
+ return -1;
+
+ if (stage == poll_stage)
+ break;
+ udelay(1000);
+ }
+ if (stage != poll_stage)
+ return -1;
+ return 0;
+}
+
+
+int be_cmd_POST(struct be_ctrl_info *ctrl)
+{
+ u16 stage, error;
+
+ error = be_POST_stage_get(ctrl, &stage);
+ if (error)
+ goto err;
+
+ if (stage == POST_STAGE_ARMFW_RDY)
+ return 0;
+
+ if (stage != POST_STAGE_AWAITING_HOST_RDY)
+ goto err;
+
+ /* On awaiting host rdy, reset and again poll on awaiting host rdy */
+ iowrite32(POST_STAGE_BE_RESET, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+ error = be_POST_stage_poll(ctrl, POST_STAGE_AWAITING_HOST_RDY);
+ if (error)
+ goto err;
+
+ /* Now kickoff POST and poll on armfw ready */
+ iowrite32(POST_STAGE_HOST_RDY, ctrl->csr + MPU_EP_SEMAPHORE_OFFSET);
+ error = be_POST_stage_poll(ctrl, POST_STAGE_ARMFW_RDY);
+ if (error)
+ goto err;
+
+ return 0;
+err:
+ printk(KERN_WARNING DRV_NAME ": ERROR, stage=%d\n", stage);
+ return -1;
+}
+
+static inline void *embedded_payload(struct be_mcc_wrb *wrb)
+{
+ return wrb->payload.embedded_payload;
+}
+
+static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
+{
+ return &wrb->payload.sgl[0];
+}
+
+/* Don't touch the hdr after it's prepared */
+static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+ bool embedded, u8 sge_cnt)
+{
+ if (embedded)
+ wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
+ else
+ wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
+ MCC_WRB_SGE_CNT_SHIFT;
+ wrb->payload_length = payload_len;
+ be_dws_cpu_to_le(wrb, 20);
+}
+
+/* Don't touch the hdr after it's prepared */
+static void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+ u8 subsystem, u8 opcode, int cmd_len)
+{
+ req_hdr->opcode = opcode;
+ req_hdr->subsystem = subsystem;
+ req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+}
+
+static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
+ struct be_dma_mem *mem)
+{
+ int i, buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages);
+ u64 dma = (u64)mem->dma;
+
+ for (i = 0; i < buf_pages; i++) {
+ pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF);
+ pages[i].hi = cpu_to_le32(upper_32_bits(dma));
+ dma += PAGE_SIZE_4K;
+ }
+}
+
+/* Converts interrupt delay in microseconds to multiplier value */
+static u32 eq_delay_to_mult(u32 usec_delay)
+{
+#define MAX_INTR_RATE 651042
+ const u32 round = 10;
+ u32 multiplier;
+
+ if (usec_delay == 0)
+ multiplier = 0;
+ else {
+ u32 interrupt_rate = 1000000 / usec_delay;
+ /* Max delay, corresponding to the lowest interrupt rate */
+ if (interrupt_rate == 0)
+ multiplier = 1023;
+ else {
+ multiplier = (MAX_INTR_RATE - interrupt_rate) * round;
+ multiplier /= interrupt_rate;
+ /* Round the multiplier to the closest value.*/
+ multiplier = (multiplier + round/2) / round;
+ multiplier = min(multiplier, (u32)1023);
+ }
+ }
+ return multiplier;
+}
+
+static inline struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
+{
+ return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+}
+
+int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *eq, int eq_delay)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_eq_create *req = embedded_payload(wrb);
+ struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &eq->dma_mem;
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_EQ_CREATE, sizeof(*req));
+
+ req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+ AMAP_SET_BITS(struct amap_eq_context, func, req->context,
+ ctrl->pci_func);
+ AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
+ /* 4byte eqe*/
+ AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
+ AMAP_SET_BITS(struct amap_eq_context, count, req->context,
+ __ilog2_u32(eq->len/256));
+ AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context,
+ eq_delay_to_mult(eq_delay));
+ be_dws_cpu_to_le(req->context, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ eq->id = le16_to_cpu(resp->eq_id);
+ eq->created = true;
+ }
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+ u8 type, bool permanent, u32 if_handle)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_mac_query *req = embedded_payload(wrb);
+ struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_MAC_QUERY, sizeof(*req));
+
+ req->type = type;
+ if (permanent) {
+ req->permanent = 1;
+ } else {
+ req->if_id = cpu_to_le16((u16)if_handle);
+ req->permanent = 0;
+ }
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status)
+ memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+ u32 if_id, u32 *pmac_id)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_PMAC_ADD, sizeof(*req));
+
+ req->if_id = cpu_to_le32(if_id);
+ memcpy(req->mac_address, mac_addr, ETH_ALEN);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_pmac_add *resp = embedded_payload(wrb);
+ *pmac_id = le32_to_cpu(resp->pmac_id);
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_PMAC_DEL, sizeof(*req));
+
+ req->if_id = cpu_to_le32(if_id);
+ req->pmac_id = cpu_to_le32(pmac_id);
+
+ status = be_mbox_db_ring(ctrl);
+ spin_unlock(&ctrl->cmd_lock);
+
+ return status;
+}
+
+int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *cq, struct be_queue_info *eq,
+ bool sol_evts, bool no_delay, int coalesce_wm)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_cq_create *req = embedded_payload(wrb);
+ struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &cq->dma_mem;
+ void *ctxt = &req->context;
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_CQ_CREATE, sizeof(*req));
+
+ req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+ AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
+ AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
+ AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
+ __ilog2_u32(cq->len/256));
+ AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
+ AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
+ AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
+ AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
+ AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 0);
+ AMAP_SET_BITS(struct amap_cq_context, func, ctxt, ctrl->pci_func);
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ cq->id = le16_to_cpu(resp->cq_id);
+ cq->created = true;
+ }
+ spin_unlock(&ctrl->cmd_lock);
+
+ return status;
+}
+
+int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *txq,
+ struct be_queue_info *cq)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_eth_tx_create *req = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &txq->dma_mem;
+ void *ctxt = &req->context;
+ int status;
+ u32 len_encoded;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_TX_CREATE,
+ sizeof(*req));
+
+ req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+ req->ulp_num = BE_ULP1_NUM;
+ req->type = BE_ETH_TX_RING_TYPE_STANDARD;
+
+ len_encoded = fls(txq->len); /* log2(len) + 1 */
+ if (len_encoded == 16)
+ len_encoded = 0;
+ AMAP_SET_BITS(struct amap_tx_context, tx_ring_size, ctxt, len_encoded);
+ AMAP_SET_BITS(struct amap_tx_context, pci_func_id, ctxt,
+ ctrl->pci_func);
+ AMAP_SET_BITS(struct amap_tx_context, ctx_valid, ctxt, 1);
+ AMAP_SET_BITS(struct amap_tx_context, cq_id_send, ctxt, cq->id);
+
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_eth_tx_create *resp = embedded_payload(wrb);
+ txq->id = le16_to_cpu(resp->cid);
+ txq->created = true;
+ }
+ spin_unlock(&ctrl->cmd_lock);
+
+ return status;
+}
+
+int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *rxq, u16 cq_id, u16 frag_size,
+ u16 max_frame_size, u32 if_id, u32 rss)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_eth_rx_create *req = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &rxq->dma_mem;
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_RX_CREATE,
+ sizeof(*req));
+
+ req->cq_id = cpu_to_le16(cq_id);
+ req->frag_size = fls(frag_size) - 1;
+ req->num_pages = 2;
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+ req->interface_id = cpu_to_le32(if_id);
+ req->max_frame_size = cpu_to_le16(max_frame_size);
+ req->rss_queue = cpu_to_le32(rss);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_eth_rx_create *resp = embedded_payload(wrb);
+ rxq->id = le16_to_cpu(resp->id);
+ rxq->created = true;
+ }
+ spin_unlock(&ctrl->cmd_lock);
+
+ return status;
+}
+
+/* Generic destroyer function for all types of queues */
+int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+ int queue_type)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
+ u8 subsys = 0, opcode = 0;
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ switch (queue_type) {
+ case QTYPE_EQ:
+ subsys = CMD_SUBSYSTEM_COMMON;
+ opcode = OPCODE_COMMON_EQ_DESTROY;
+ break;
+ case QTYPE_CQ:
+ subsys = CMD_SUBSYSTEM_COMMON;
+ opcode = OPCODE_COMMON_CQ_DESTROY;
+ break;
+ case QTYPE_TXQ:
+ subsys = CMD_SUBSYSTEM_ETH;
+ opcode = OPCODE_ETH_TX_DESTROY;
+ break;
+ case QTYPE_RXQ:
+ subsys = CMD_SUBSYSTEM_ETH;
+ opcode = OPCODE_ETH_RX_DESTROY;
+ break;
+ default:
+ printk(KERN_WARNING DRV_NAME ":bad Q type in Q destroy cmd\n");
+ status = -1;
+ goto err;
+ }
+ be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
+ req->id = cpu_to_le16(q->id);
+
+ status = be_mbox_db_ring(ctrl);
+err:
+ spin_unlock(&ctrl->cmd_lock);
+
+ return status;
+}
+
+/* Create an rx filtering policy configuration on an i/f */
+int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 flags, u8 *mac,
+ bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_if_create *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
+
+ req->capability_flags = cpu_to_le32(flags);
+ req->enable_flags = cpu_to_le32(flags);
+ if (!pmac_invalid)
+ memcpy(req->mac_addr, mac, ETH_ALEN);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_if_create *resp = embedded_payload(wrb);
+ *if_handle = le32_to_cpu(resp->interface_id);
+ if (!pmac_invalid)
+ *pmac_id = le32_to_cpu(resp->pmac_id);
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 interface_id)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
+
+ req->interface_id = cpu_to_le32(interface_id);
+ status = be_mbox_db_ring(ctrl);
+
+ spin_unlock(&ctrl->cmd_lock);
+
+ return status;
+}
+
+/* Get stats is a non embedded command: the request is not embedded inside
+ * WRB but is a separate dma memory block
+ */
+int be_cmd_get_stats(struct be_ctrl_info *ctrl, struct be_dma_mem *nonemb_cmd)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_get_stats *req = nonemb_cmd->va;
+ struct be_sge *sge = nonembedded_sgl(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ memset(req, 0, sizeof(*req));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_GET_STATISTICS, sizeof(*req));
+ sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+ sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(nonemb_cmd->size);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_get_stats *resp = nonemb_cmd->va;
+ be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+ struct be_link_info *link)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_link_status *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
+ link->speed = resp->mac_speed;
+ link->duplex = resp->mac_duplex;
+ link->fault = resp->mac_fault;
+ } else {
+ link->speed = PHY_LINK_SPEED_ZERO;
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
+ strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+/* set the EQ delay interval of an EQ to specified value */
+int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
+
+ req->num_eq = cpu_to_le32(1);
+ req->delay[0].eq_id = cpu_to_le32(eq_id);
+ req->delay[0].phase = 0;
+ req->delay[0].delay_multiplier = cpu_to_le32(eqd);
+
+ status = be_mbox_db_ring(ctrl);
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
+ u32 num, bool untagged, bool promiscuous)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req));
+
+ req->interface_id = if_id;
+ req->promiscuous = promiscuous;
+ req->untagged = untagged;
+ req->num_vlan = num;
+ if (!promiscuous) {
+ memcpy(req->normal_vlan, vtag_array,
+ req->num_vlan * sizeof(vtag_array[0]));
+ }
+
+ status = be_mbox_db_ring(ctrl);
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_promiscuous_config *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+ OPCODE_ETH_PROMISCUOUS, sizeof(*req));
+
+ if (port_num)
+ req->port1_promiscuous = en;
+ else
+ req->port0_promiscuous = en;
+
+ status = be_mbox_db_ring(ctrl);
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
+ u32 num, bool promiscuous)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_mcast_mac_config *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
+
+ req->interface_id = if_id;
+ req->promiscuous = promiscuous;
+ if (!promiscuous) {
+ req->num_mac = cpu_to_le16(num);
+ if (num)
+ memcpy(req->mac, mac_table, ETH_ALEN * num);
+ }
+
+ status = be_mbox_db_ring(ctrl);
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req));
+
+ req->tx_flow_control = cpu_to_le16((u16)tx_fc);
+ req->rx_flow_control = cpu_to_le16((u16)rx_fc);
+
+ status = be_mbox_db_ring(ctrl);
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_get_flow_control(struct be_ctrl_info *ctrl, u32 *tx_fc, u32 *rx_fc)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_get_flow_control *resp =
+ embedded_payload(wrb);
+ *tx_fc = le16_to_cpu(resp->tx_flow_control);
+ *rx_fc = le16_to_cpu(resp->rx_flow_control);
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
+
+int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->cmd_lock);
+
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
+ *port_num = le32_to_cpu(resp->phys_port);
+ }
+
+ spin_unlock(&ctrl->cmd_lock);
+ return status;
+}
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
new file mode 100644
index 0000000..e499e2d
--- /dev/null
+++ b/drivers/net/benet/be_cmds.h
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+/*
+ * The driver sends configuration and managements command requests to the
+ * firmware in the BE. These requests are communicated to the processor
+ * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one
+ * WRB inside a MAILBOX.
+ * The commands are serviced by the ARM processor in the BladeEngine's MPU.
+ */
+
+struct be_sge {
+ u32 pa_lo;
+ u32 pa_hi;
+ u32 len;
+};
+
+#define MCC_WRB_EMBEDDED_MASK 1 /* bit 0 of dword 0*/
+#define MCC_WRB_SGE_CNT_SHIFT 3 /* bits 3 - 7 of dword 0 */
+#define MCC_WRB_SGE_CNT_MASK 0x1F /* bits 3 - 7 of dword 0 */
+struct be_mcc_wrb {
+ u32 embedded; /* dword 0 */
+ u32 payload_length; /* dword 1 */
+ u32 tag0; /* dword 2 */
+ u32 tag1; /* dword 3 */
+ u32 rsvd; /* dword 4 */
+ union {
+ u8 embedded_payload[236]; /* used by embedded cmds */
+ struct be_sge sgl[19]; /* used by non-embedded cmds */
+ } payload;
+};
+
+#define CQE_FLAGS_VALID_MASK (1 << 31)
+#define CQE_FLAGS_ASYNC_MASK (1 << 30)
+#define CQE_FLAGS_COMPLETED_MASK (1 << 28)
+#define CQE_FLAGS_CONSUMED_MASK (1 << 27)
+
+/* Completion Status */
+enum {
+ MCC_STATUS_SUCCESS = 0x0,
+/* The client does not have sufficient privileges to execute the command */
+ MCC_STATUS_INSUFFICIENT_PRIVILEGES = 0x1,
+/* A parameter in the command was invalid. */
+ MCC_STATUS_INVALID_PARAMETER = 0x2,
+/* There are insufficient chip resources to execute the command */
+ MCC_STATUS_INSUFFICIENT_RESOURCES = 0x3,
+/* The command is completing because the queue was getting flushed */
+ MCC_STATUS_QUEUE_FLUSHING = 0x4,
+/* The command is completing with a DMA error */
+ MCC_STATUS_DMA_FAILED = 0x5
+};
+
+#define CQE_STATUS_COMPL_MASK 0xFFFF
+#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
+#define CQE_STATUS_EXTD_MASK 0xFFFF
+#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */
+
+struct be_mcc_cq_entry {
+ u32 status; /* dword 0 */
+ u32 tag0; /* dword 1 */
+ u32 tag1; /* dword 2 */
+ u32 flags; /* dword 3 */
+};
+
+struct be_mcc_mailbox {
+ struct be_mcc_wrb wrb;
+ struct be_mcc_cq_entry cqe;
+};
+
+#define CMD_SUBSYSTEM_COMMON 0x1
+#define CMD_SUBSYSTEM_ETH 0x3
+
+#define OPCODE_COMMON_NTWK_MAC_QUERY 1
+#define OPCODE_COMMON_NTWK_MAC_SET 2
+#define OPCODE_COMMON_NTWK_MULTICAST_SET 3
+#define OPCODE_COMMON_NTWK_VLAN_CONFIG 4
+#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY 5
+#define OPCODE_COMMON_CQ_CREATE 12
+#define OPCODE_COMMON_EQ_CREATE 13
+#define OPCODE_COMMON_MCC_CREATE 21
+#define OPCODE_COMMON_NTWK_RX_FILTER 34
+#define OPCODE_COMMON_GET_FW_VERSION 35
+#define OPCODE_COMMON_SET_FLOW_CONTROL 36
+#define OPCODE_COMMON_GET_FLOW_CONTROL 37
+#define OPCODE_COMMON_SET_FRAME_SIZE 39
+#define OPCODE_COMMON_MODIFY_EQ_DELAY 41
+#define OPCODE_COMMON_FIRMWARE_CONFIG 42
+#define OPCODE_COMMON_NTWK_INTERFACE_CREATE 50
+#define OPCODE_COMMON_NTWK_INTERFACE_DESTROY 51
+#define OPCODE_COMMON_CQ_DESTROY 54
+#define OPCODE_COMMON_EQ_DESTROY 55
+#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG 58
+#define OPCODE_COMMON_NTWK_PMAC_ADD 59
+#define OPCODE_COMMON_NTWK_PMAC_DEL 60
+
+#define OPCODE_ETH_ACPI_CONFIG 2
+#define OPCODE_ETH_PROMISCUOUS 3
+#define OPCODE_ETH_GET_STATISTICS 4
+#define OPCODE_ETH_TX_CREATE 7
+#define OPCODE_ETH_RX_CREATE 8
+#define OPCODE_ETH_TX_DESTROY 9
+#define OPCODE_ETH_RX_DESTROY 10
+
+struct be_cmd_req_hdr {
+ u8 opcode; /* dword 0 */
+ u8 subsystem; /* dword 0 */
+ u8 port_number; /* dword 0 */
+ u8 domain; /* dword 0 */
+ u32 timeout; /* dword 1 */
+ u32 request_length; /* dword 2 */
+ u32 rsvd; /* dword 3 */
+};
+
+#define RESP_HDR_INFO_OPCODE_SHIFT 0 /* bits 0 - 7 */
+#define RESP_HDR_INFO_SUBSYS_SHIFT 8 /* bits 8 - 15 */
+struct be_cmd_resp_hdr {
+ u32 info; /* dword 0 */
+ u32 status; /* dword 1 */
+ u32 response_length; /* dword 2 */
+ u32 actual_resp_len; /* dword 3 */
+};
+
+struct phys_addr {
+ u32 lo;
+ u32 hi;
+};
+
+/**************************
+ * BE Command definitions *
+ **************************/
+
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_eq_context {
+ u8 cidx[13]; /* dword 0*/
+ u8 rsvd0[3]; /* dword 0*/
+ u8 epidx[13]; /* dword 0*/
+ u8 valid; /* dword 0*/
+ u8 rsvd1; /* dword 0*/
+ u8 size; /* dword 0*/
+ u8 pidx[13]; /* dword 1*/
+ u8 rsvd2[3]; /* dword 1*/
+ u8 pd[10]; /* dword 1*/
+ u8 count[3]; /* dword 1*/
+ u8 solevent; /* dword 1*/
+ u8 stalled; /* dword 1*/
+ u8 armed; /* dword 1*/
+ u8 rsvd3[4]; /* dword 2*/
+ u8 func[8]; /* dword 2*/
+ u8 rsvd4; /* dword 2*/
+ u8 delaymult[10]; /* dword 2*/
+ u8 rsvd5[2]; /* dword 2*/
+ u8 phase[2]; /* dword 2*/
+ u8 nodelay; /* dword 2*/
+ u8 rsvd6[4]; /* dword 2*/
+ u8 rsvd7[32]; /* dword 3*/
+} __packed;
+
+struct be_cmd_req_eq_create {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages; /* sword */
+ u16 rsvd0; /* sword */
+ u8 context[sizeof(struct amap_eq_context) / 8];
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_eq_create {
+ struct be_cmd_resp_hdr resp_hdr;
+ u16 eq_id; /* sword */
+ u16 rsvd0; /* sword */
+} __packed;
+
+/******************** Mac query ***************************/
+enum {
+ MAC_ADDRESS_TYPE_STORAGE = 0x0,
+ MAC_ADDRESS_TYPE_NETWORK = 0x1,
+ MAC_ADDRESS_TYPE_PD = 0x2,
+ MAC_ADDRESS_TYPE_MANAGEMENT = 0x3
+};
+
+struct mac_addr {
+ u16 size_of_struct;
+ u8 addr[ETH_ALEN];
+} __packed;
+
+struct be_cmd_req_mac_query {
+ struct be_cmd_req_hdr hdr;
+ u8 type;
+ u8 permanent;
+ u16 if_id;
+} __packed;
+
+struct be_cmd_resp_mac_query {
+ struct be_cmd_resp_hdr hdr;
+ struct mac_addr mac;
+};
+
+/******************** PMac Add ***************************/
+struct be_cmd_req_pmac_add {
+ struct be_cmd_req_hdr hdr;
+ u32 if_id;
+ u8 mac_address[ETH_ALEN];
+ u8 rsvd0[2];
+} __packed;
+
+struct be_cmd_resp_pmac_add {
+ struct be_cmd_resp_hdr hdr;
+ u32 pmac_id;
+};
+
+/******************** PMac Del ***************************/
+struct be_cmd_req_pmac_del {
+ struct be_cmd_req_hdr hdr;
+ u32 if_id;
+ u32 pmac_id;
+};
+
+/******************** Create CQ ***************************/
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_cq_context {
+ u8 cidx[11]; /* dword 0*/
+ u8 rsvd0; /* dword 0*/
+ u8 coalescwm[2]; /* dword 0*/
+ u8 nodelay; /* dword 0*/
+ u8 epidx[11]; /* dword 0*/
+ u8 rsvd1; /* dword 0*/
+ u8 count[2]; /* dword 0*/
+ u8 valid; /* dword 0*/
+ u8 solevent; /* dword 0*/
+ u8 eventable; /* dword 0*/
+ u8 pidx[11]; /* dword 1*/
+ u8 rsvd2; /* dword 1*/
+ u8 pd[10]; /* dword 1*/
+ u8 eqid[8]; /* dword 1*/
+ u8 stalled; /* dword 1*/
+ u8 armed; /* dword 1*/
+ u8 rsvd3[4]; /* dword 2*/
+ u8 func[8]; /* dword 2*/
+ u8 rsvd4[20]; /* dword 2*/
+ u8 rsvd5[32]; /* dword 3*/
+} __packed;
+
+struct be_cmd_req_cq_create {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u16 rsvd0;
+ u8 context[sizeof(struct amap_cq_context) / 8];
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_cq_create {
+ struct be_cmd_resp_hdr hdr;
+ u16 cq_id;
+ u16 rsvd0;
+} __packed;
+
+/******************** Create TxQ ***************************/
+#define BE_ETH_TX_RING_TYPE_STANDARD 2
+#define BE_ULP1_NUM 1
+
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_tx_context {
+ u8 rsvd0[16]; /* dword 0 */
+ u8 tx_ring_size[4]; /* dword 0 */
+ u8 rsvd1[26]; /* dword 0 */
+ u8 pci_func_id[8]; /* dword 1 */
+ u8 rsvd2[9]; /* dword 1 */
+ u8 ctx_valid; /* dword 1 */
+ u8 cq_id_send[16]; /* dword 2 */
+ u8 rsvd3[16]; /* dword 2 */
+ u8 rsvd4[32]; /* dword 3 */
+ u8 rsvd5[32]; /* dword 4 */
+ u8 rsvd6[32]; /* dword 5 */
+ u8 rsvd7[32]; /* dword 6 */
+ u8 rsvd8[32]; /* dword 7 */
+ u8 rsvd9[32]; /* dword 8 */
+ u8 rsvd10[32]; /* dword 9 */
+ u8 rsvd11[32]; /* dword 10 */
+ u8 rsvd12[32]; /* dword 11 */
+ u8 rsvd13[32]; /* dword 12 */
+ u8 rsvd14[32]; /* dword 13 */
+ u8 rsvd15[32]; /* dword 14 */
+ u8 rsvd16[32]; /* dword 15 */
+} __packed;
+
+struct be_cmd_req_eth_tx_create {
+ struct be_cmd_req_hdr hdr;
+ u8 num_pages;
+ u8 ulp_num;
+ u8 type;
+ u8 bound_port;
+ u8 context[sizeof(struct amap_tx_context) / 8];
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_eth_tx_create {
+ struct be_cmd_resp_hdr hdr;
+ u16 cid;
+ u16 rsvd0;
+} __packed;
+
+/******************** Create RxQ ***************************/
+struct be_cmd_req_eth_rx_create {
+ struct be_cmd_req_hdr hdr;
+ u16 cq_id;
+ u8 frag_size;
+ u8 num_pages;
+ struct phys_addr pages[2];
+ u32 interface_id;
+ u16 max_frame_size;
+ u16 rsvd0;
+ u32 rss_queue;
+} __packed;
+
+struct be_cmd_resp_eth_rx_create {
+ struct be_cmd_resp_hdr hdr;
+ u16 id;
+ u8 cpu_id;
+ u8 rsvd0;
+} __packed;
+
+/******************** Q Destroy ***************************/
+/* Type of Queue to be destroyed */
+enum {
+ QTYPE_EQ = 1,
+ QTYPE_CQ,
+ QTYPE_TXQ,
+ QTYPE_RXQ
+};
+
+struct be_cmd_req_q_destroy {
+ struct be_cmd_req_hdr hdr;
+ u16 id;
+ u16 bypass_flush; /* valid only for rx q destroy */
+} __packed;
+
+/************ I/f Create (it's actually I/f Config Create)**********/
+
+/* Capability flags for the i/f */
+enum be_if_flags {
+ BE_IF_FLAGS_RSS = 0x4,
+ BE_IF_FLAGS_PROMISCUOUS = 0x8,
+ BE_IF_FLAGS_BROADCAST = 0x10,
+ BE_IF_FLAGS_UNTAGGED = 0x20,
+ BE_IF_FLAGS_ULP = 0x40,
+ BE_IF_FLAGS_VLAN_PROMISCUOUS = 0x80,
+ BE_IF_FLAGS_VLAN = 0x100,
+ BE_IF_FLAGS_MCAST_PROMISCUOUS = 0x200,
+ BE_IF_FLAGS_PASS_L2_ERRORS = 0x400,
+ BE_IF_FLAGS_PASS_L3L4_ERRORS = 0x800
+};
+
+/* An RX interface is an object with one or more MAC addresses and
+ * filtering capabilities. */
+struct be_cmd_req_if_create {
+ struct be_cmd_req_hdr hdr;
+ u32 version; /* ignore currntly */
+ u32 capability_flags;
+ u32 enable_flags;
+ u8 mac_addr[ETH_ALEN];
+ u8 rsvd0;
+ u8 pmac_invalid; /* if set, don't attach the mac addr to the i/f */
+ u32 vlan_tag; /* not used currently */
+} __packed;
+
+struct be_cmd_resp_if_create {
+ struct be_cmd_resp_hdr hdr;
+ u32 interface_id;
+ u32 pmac_id;
+};
+
+/****** I/f Destroy(it's actually I/f Config Destroy )**********/
+struct be_cmd_req_if_destroy {
+ struct be_cmd_req_hdr hdr;
+ u32 interface_id;
+};
+
+/*************** HW Stats Get **********************************/
+struct be_port_rxf_stats {
+ u32 rx_bytes_lsd; /* dword 0*/
+ u32 rx_bytes_msd; /* dword 1*/
+ u32 rx_total_frames; /* dword 2*/
+ u32 rx_unicast_frames; /* dword 3*/
+ u32 rx_multicast_frames; /* dword 4*/
+ u32 rx_broadcast_frames; /* dword 5*/
+ u32 rx_crc_errors; /* dword 6*/
+ u32 rx_alignment_symbol_errors; /* dword 7*/
+ u32 rx_pause_frames; /* dword 8*/
+ u32 rx_control_frames; /* dword 9*/
+ u32 rx_in_range_errors; /* dword 10*/
+ u32 rx_out_range_errors; /* dword 11*/
+ u32 rx_frame_too_long; /* dword 12*/
+ u32 rx_address_match_errors; /* dword 13*/
+ u32 rx_vlan_mismatch; /* dword 14*/
+ u32 rx_dropped_too_small; /* dword 15*/
+ u32 rx_dropped_too_short; /* dword 16*/
+ u32 rx_dropped_header_too_small; /* dword 17*/
+ u32 rx_dropped_tcp_length; /* dword 18*/
+ u32 rx_dropped_runt; /* dword 19*/
+ u32 rx_64_byte_packets; /* dword 20*/
+ u32 rx_65_127_byte_packets; /* dword 21*/
+ u32 rx_128_256_byte_packets; /* dword 22*/
+ u32 rx_256_511_byte_packets; /* dword 23*/
+ u32 rx_512_1023_byte_packets; /* dword 24*/
+ u32 rx_1024_1518_byte_packets; /* dword 25*/
+ u32 rx_1519_2047_byte_packets; /* dword 26*/
+ u32 rx_2048_4095_byte_packets; /* dword 27*/
+ u32 rx_4096_8191_byte_packets; /* dword 28*/
+ u32 rx_8192_9216_byte_packets; /* dword 29*/
+ u32 rx_ip_checksum_errs; /* dword 30*/
+ u32 rx_tcp_checksum_errs; /* dword 31*/
+ u32 rx_udp_checksum_errs; /* dword 32*/
+ u32 rx_non_rss_packets; /* dword 33*/
+ u32 rx_ipv4_packets; /* dword 34*/
+ u32 rx_ipv6_packets; /* dword 35*/
+ u32 rx_ipv4_bytes_lsd; /* dword 36*/
+ u32 rx_ipv4_bytes_msd; /* dword 37*/
+ u32 rx_ipv6_bytes_lsd; /* dword 38*/
+ u32 rx_ipv6_bytes_msd; /* dword 39*/
+ u32 rx_chute1_packets; /* dword 40*/
+ u32 rx_chute2_packets; /* dword 41*/
+ u32 rx_chute3_packets; /* dword 42*/
+ u32 rx_management_packets; /* dword 43*/
+ u32 rx_switched_unicast_packets; /* dword 44*/
+ u32 rx_switched_multicast_packets; /* dword 45*/
+ u32 rx_switched_broadcast_packets; /* dword 46*/
+ u32 tx_bytes_lsd; /* dword 47*/
+ u32 tx_bytes_msd; /* dword 48*/
+ u32 tx_unicastframes; /* dword 49*/
+ u32 tx_multicastframes; /* dword 50*/
+ u32 tx_broadcastframes; /* dword 51*/
+ u32 tx_pauseframes; /* dword 52*/
+ u32 tx_controlframes; /* dword 53*/
+ u32 tx_64_byte_packets; /* dword 54*/
+ u32 tx_65_127_byte_packets; /* dword 55*/
+ u32 tx_128_256_byte_packets; /* dword 56*/
+ u32 tx_256_511_byte_packets; /* dword 57*/
+ u32 tx_512_1023_byte_packets; /* dword 58*/
+ u32 tx_1024_1518_byte_packets; /* dword 59*/
+ u32 tx_1519_2047_byte_packets; /* dword 60*/
+ u32 tx_2048_4095_byte_packets; /* dword 61*/
+ u32 tx_4096_8191_byte_packets; /* dword 62*/
+ u32 tx_8192_9216_byte_packets; /* dword 63*/
+ u32 rx_fifo_overflow; /* dword 64*/
+ u32 rx_input_fifo_overflow; /* dword 65*/
+};
+
+struct be_rxf_stats {
+ struct be_port_rxf_stats port[2];
+ u32 rx_drops_no_pbuf; /* dword 132*/
+ u32 rx_drops_no_txpb; /* dword 133*/
+ u32 rx_drops_no_erx_descr; /* dword 134*/
+ u32 rx_drops_no_tpre_descr; /* dword 135*/
+ u32 management_rx_port_packets; /* dword 136*/
+ u32 management_rx_port_bytes; /* dword 137*/
+ u32 management_rx_port_pause_frames; /* dword 138*/
+ u32 management_rx_port_errors; /* dword 139*/
+ u32 management_tx_port_packets; /* dword 140*/
+ u32 management_tx_port_bytes; /* dword 141*/
+ u32 management_tx_port_pause; /* dword 142*/
+ u32 management_rx_port_rxfifo_overflow; /* dword 143*/
+ u32 rx_drops_too_many_frags; /* dword 144*/
+ u32 rx_drops_invalid_ring; /* dword 145*/
+ u32 forwarded_packets; /* dword 146*/
+ u32 rx_drops_mtu; /* dword 147*/
+ u32 rsvd0[15];
+};
+
+struct be_erx_stats {
+ u32 rx_drops_no_fragments[44]; /* dwordS 0 to 43*/
+ u32 debug_wdma_sent_hold; /* dword 44*/
+ u32 debug_wdma_pbfree_sent_hold; /* dword 45*/
+ u32 debug_wdma_zerobyte_pbfree_sent_hold; /* dword 46*/
+ u32 debug_pmem_pbuf_dealloc; /* dword 47*/
+};
+
+struct be_hw_stats {
+ struct be_rxf_stats rxf;
+ u32 rsvd[48];
+ struct be_erx_stats erx;
+};
+
+struct be_cmd_req_get_stats {
+ struct be_cmd_req_hdr hdr;
+ u8 rsvd[sizeof(struct be_hw_stats)];
+};
+
+struct be_cmd_resp_get_stats {
+ struct be_cmd_resp_hdr hdr;
+ struct be_hw_stats hw_stats;
+};
+
+struct be_cmd_req_vlan_config {
+ struct be_cmd_req_hdr hdr;
+ u8 interface_id;
+ u8 promiscuous;
+ u8 untagged;
+ u8 num_vlan;
+ u16 normal_vlan[64];
+} __packed;
+
+struct be_cmd_req_promiscuous_config {
+ struct be_cmd_req_hdr hdr;
+ u8 port0_promiscuous;
+ u8 port1_promiscuous;
+ u16 rsvd0;
+} __packed;
+
+struct macaddr {
+ u8 byte[ETH_ALEN];
+};
+
+struct be_cmd_req_mcast_mac_config {
+ struct be_cmd_req_hdr hdr;
+ u16 num_mac;
+ u8 promiscuous;
+ u8 interface_id;
+ struct macaddr mac[32];
+} __packed;
+
+static inline struct be_hw_stats *
+hw_stats_from_cmd(struct be_cmd_resp_get_stats *cmd)
+{
+ return &cmd->hw_stats;
+}
+
+/******************** Link Status Query *******************/
+struct be_cmd_req_link_status {
+ struct be_cmd_req_hdr hdr;
+ u32 rsvd;
+};
+
+struct be_link_info {
+ u8 duplex;
+ u8 speed;
+ u8 fault;
+};
+
+enum {
+ PHY_LINK_DUPLEX_NONE = 0x0,
+ PHY_LINK_DUPLEX_HALF = 0x1,
+ PHY_LINK_DUPLEX_FULL = 0x2
+};
+
+enum {
+ PHY_LINK_SPEED_ZERO = 0x0, /* => No link */
+ PHY_LINK_SPEED_10MBPS = 0x1,
+ PHY_LINK_SPEED_100MBPS = 0x2,
+ PHY_LINK_SPEED_1GBPS = 0x3,
+ PHY_LINK_SPEED_10GBPS = 0x4
+};
+
+struct be_cmd_resp_link_status {
+ struct be_cmd_resp_hdr hdr;
+ u8 physical_port;
+ u8 mac_duplex;
+ u8 mac_speed;
+ u8 mac_fault;
+ u8 mgmt_mac_duplex;
+ u8 mgmt_mac_speed;
+ u16 rsvd0;
+} __packed;
+
+/******************** Get FW Version *******************/
+#define FW_VER_LEN 32
+struct be_cmd_req_get_fw_version {
+ struct be_cmd_req_hdr hdr;
+ u8 rsvd0[FW_VER_LEN];
+ u8 rsvd1[FW_VER_LEN];
+} __packed;
+
+struct be_cmd_resp_get_fw_version {
+ struct be_cmd_resp_hdr hdr;
+ u8 firmware_version_string[FW_VER_LEN];
+ u8 fw_on_flash_version_string[FW_VER_LEN];
+} __packed;
+
+/******************** Set Flow Contrl *******************/
+struct be_cmd_req_set_flow_control {
+ struct be_cmd_req_hdr hdr;
+ u16 tx_flow_control;
+ u16 rx_flow_control;
+} __packed;
+
+/******************** Get Flow Contrl *******************/
+struct be_cmd_req_get_flow_control {
+ struct be_cmd_req_hdr hdr;
+ u32 rsvd;
+};
+
+struct be_cmd_resp_get_flow_control {
+ struct be_cmd_resp_hdr hdr;
+ u16 tx_flow_control;
+ u16 rx_flow_control;
+} __packed;
+
+/******************** Modify EQ Delay *******************/
+struct be_cmd_req_modify_eq_delay {
+ struct be_cmd_req_hdr hdr;
+ u32 num_eq;
+ struct {
+ u32 eq_id;
+ u32 phase;
+ u32 delay_multiplier;
+ } delay[8];
+} __packed;
+
+struct be_cmd_resp_modify_eq_delay {
+ struct be_cmd_resp_hdr hdr;
+ u32 rsvd0;
+} __packed;
+
+/******************** Get FW Config *******************/
+struct be_cmd_req_query_fw_cfg {
+ struct be_cmd_req_hdr hdr;
+ u32 rsvd[30];
+};
+
+struct be_cmd_resp_query_fw_cfg {
+ struct be_cmd_resp_hdr hdr;
+ u32 be_config_number;
+ u32 asic_revision;
+ u32 phys_port;
+ u32 function_mode;
+ u32 rsvd[26];
+};
+
+extern int be_pci_fnum_get(struct be_ctrl_info *ctrl);
+extern int be_cmd_POST(struct be_ctrl_info *ctrl);
+extern int be_cmd_mac_addr_query(struct be_ctrl_info *ctrl, u8 *mac_addr,
+ u8 type, bool permanent, u32 if_handle);
+extern int be_cmd_pmac_add(struct be_ctrl_info *ctrl, u8 *mac_addr,
+ u32 if_id, u32 *pmac_id);
+extern int be_cmd_pmac_del(struct be_ctrl_info *ctrl, u32 if_id, u32 pmac_id);
+extern int be_cmd_if_create(struct be_ctrl_info *ctrl, u32 if_flags, u8 *mac,
+ bool pmac_invalid, u32 *if_handle, u32 *pmac_id);
+extern int be_cmd_if_destroy(struct be_ctrl_info *ctrl, u32 if_handle);
+extern int be_cmd_eq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *eq, int eq_delay);
+extern int be_cmd_cq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *cq, struct be_queue_info *eq,
+ bool sol_evts, bool no_delay,
+ int num_cqe_dma_coalesce);
+extern int be_cmd_txq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *txq,
+ struct be_queue_info *cq);
+extern int be_cmd_rxq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *rxq, u16 cq_id,
+ u16 frag_size, u16 max_frame_size, u32 if_id,
+ u32 rss);
+extern int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+ int type);
+extern int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
+ struct be_link_info *link);
+extern int be_cmd_reset(struct be_ctrl_info *ctrl);
+extern int be_cmd_get_stats(struct be_ctrl_info *ctrl,
+ struct be_dma_mem *nonemb_cmd);
+extern int be_cmd_get_fw_ver(struct be_ctrl_info *ctrl, char *fw_ver);
+
+extern int be_cmd_modify_eqd(struct be_ctrl_info *ctrl, u32 eq_id, u32 eqd);
+extern int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id,
+ u16 *vtag_array, u32 num, bool untagged,
+ bool promiscuous);
+extern int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl,
+ u8 port_num, bool en);
+extern int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id,
+ u8 *mac_table, u32 num, bool promiscuous);
+extern int be_cmd_set_flow_control(struct be_ctrl_info *ctrl,
+ u32 tx_fc, u32 rx_fc);
+extern int be_cmd_get_flow_control(struct be_ctrl_info *ctrl,
+ u32 *tx_fc, u32 *rx_fc);
+extern int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
new file mode 100644
index 0000000..04f4b73
--- /dev/null
+++ b/drivers/net/benet/be_ethtool.c
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+#include <linux/ethtool.h>
+
+struct be_ethtool_stat {
+ char desc[ETH_GSTRING_LEN];
+ int type;
+ int size;
+ int offset;
+};
+
+enum {NETSTAT, PORTSTAT, MISCSTAT, DRVSTAT, ERXSTAT};
+#define FIELDINFO(_struct, field) FIELD_SIZEOF(_struct, field), \
+ offsetof(_struct, field)
+#define NETSTAT_INFO(field) #field, NETSTAT,\
+ FIELDINFO(struct net_device_stats,\
+ field)
+#define DRVSTAT_INFO(field) #field, DRVSTAT,\
+ FIELDINFO(struct be_drvr_stats, field)
+#define MISCSTAT_INFO(field) #field, MISCSTAT,\
+ FIELDINFO(struct be_rxf_stats, field)
+#define PORTSTAT_INFO(field) #field, PORTSTAT,\
+ FIELDINFO(struct be_port_rxf_stats, \
+ field)
+#define ERXSTAT_INFO(field) #field, ERXSTAT,\
+ FIELDINFO(struct be_erx_stats, field)
+
+static const struct be_ethtool_stat et_stats[] = {
+ {NETSTAT_INFO(rx_packets)},
+ {NETSTAT_INFO(tx_packets)},
+ {NETSTAT_INFO(rx_bytes)},
+ {NETSTAT_INFO(tx_bytes)},
+ {NETSTAT_INFO(rx_errors)},
+ {NETSTAT_INFO(tx_errors)},
+ {NETSTAT_INFO(rx_dropped)},
+ {NETSTAT_INFO(tx_dropped)},
+ {DRVSTAT_INFO(be_tx_reqs)},
+ {DRVSTAT_INFO(be_tx_stops)},
+ {DRVSTAT_INFO(be_fwd_reqs)},
+ {DRVSTAT_INFO(be_tx_wrbs)},
+ {DRVSTAT_INFO(be_polls)},
+ {DRVSTAT_INFO(be_tx_events)},
+ {DRVSTAT_INFO(be_rx_events)},
+ {DRVSTAT_INFO(be_tx_compl)},
+ {DRVSTAT_INFO(be_rx_compl)},
+ {DRVSTAT_INFO(be_ethrx_post_fail)},
+ {DRVSTAT_INFO(be_802_3_dropped_frames)},
+ {DRVSTAT_INFO(be_802_3_malformed_frames)},
+ {DRVSTAT_INFO(be_tx_rate)},
+ {DRVSTAT_INFO(be_rx_rate)},
+ {PORTSTAT_INFO(rx_unicast_frames)},
+ {PORTSTAT_INFO(rx_multicast_frames)},
+ {PORTSTAT_INFO(rx_broadcast_frames)},
+ {PORTSTAT_INFO(rx_crc_errors)},
+ {PORTSTAT_INFO(rx_alignment_symbol_errors)},
+ {PORTSTAT_INFO(rx_pause_frames)},
+ {PORTSTAT_INFO(rx_control_frames)},
+ {PORTSTAT_INFO(rx_in_range_errors)},
+ {PORTSTAT_INFO(rx_out_range_errors)},
+ {PORTSTAT_INFO(rx_frame_too_long)},
+ {PORTSTAT_INFO(rx_address_match_errors)},
+ {PORTSTAT_INFO(rx_vlan_mismatch)},
+ {PORTSTAT_INFO(rx_dropped_too_small)},
+ {PORTSTAT_INFO(rx_dropped_too_short)},
+ {PORTSTAT_INFO(rx_dropped_header_too_small)},
+ {PORTSTAT_INFO(rx_dropped_tcp_length)},
+ {PORTSTAT_INFO(rx_dropped_runt)},
+ {PORTSTAT_INFO(rx_fifo_overflow)},
+ {PORTSTAT_INFO(rx_input_fifo_overflow)},
+ {PORTSTAT_INFO(rx_ip_checksum_errs)},
+ {PORTSTAT_INFO(rx_tcp_checksum_errs)},
+ {PORTSTAT_INFO(rx_udp_checksum_errs)},
+ {PORTSTAT_INFO(rx_non_rss_packets)},
+ {PORTSTAT_INFO(rx_ipv4_packets)},
+ {PORTSTAT_INFO(rx_ipv6_packets)},
+ {PORTSTAT_INFO(tx_unicastframes)},
+ {PORTSTAT_INFO(tx_multicastframes)},
+ {PORTSTAT_INFO(tx_broadcastframes)},
+ {PORTSTAT_INFO(tx_pauseframes)},
+ {PORTSTAT_INFO(tx_controlframes)},
+ {MISCSTAT_INFO(rx_drops_no_pbuf)},
+ {MISCSTAT_INFO(rx_drops_no_txpb)},
+ {MISCSTAT_INFO(rx_drops_no_erx_descr)},
+ {MISCSTAT_INFO(rx_drops_no_tpre_descr)},
+ {MISCSTAT_INFO(rx_drops_too_many_frags)},
+ {MISCSTAT_INFO(rx_drops_invalid_ring)},
+ {MISCSTAT_INFO(forwarded_packets)},
+ {MISCSTAT_INFO(rx_drops_mtu)},
+ {ERXSTAT_INFO(rx_drops_no_fragments)},
+};
+#define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
+
+static void
+be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ strcpy(drvinfo->driver, DRV_NAME);
+ strcpy(drvinfo->version, DRV_VER);
+ strncpy(drvinfo->fw_version, adapter->fw_ver, FW_VER_LEN);
+ strcpy(drvinfo->bus_info, pci_name(adapter->pdev));
+ drvinfo->testinfo_len = 0;
+ drvinfo->regdump_len = 0;
+ drvinfo->eedump_len = 0;
+}
+
+static int
+be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ struct be_eq_obj *tx_eq = &adapter->tx_eq;
+
+ coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
+
+ coalesce->rx_coalesce_usecs = rx_eq->cur_eqd;
+ coalesce->rx_coalesce_usecs_high = rx_eq->max_eqd;
+ coalesce->rx_coalesce_usecs_low = rx_eq->min_eqd;
+
+ coalesce->tx_coalesce_usecs = tx_eq->cur_eqd;
+ coalesce->tx_coalesce_usecs_high = tx_eq->max_eqd;
+ coalesce->tx_coalesce_usecs_low = tx_eq->min_eqd;
+
+ coalesce->use_adaptive_rx_coalesce = rx_eq->enable_aic;
+ coalesce->use_adaptive_tx_coalesce = tx_eq->enable_aic;
+
+ return 0;
+}
+
+/*
+ * This routine is used to set interrup coalescing delay *as well as*
+ * the number of pkts to coalesce for LRO.
+ */
+static int
+be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ struct be_eq_obj *tx_eq = &adapter->tx_eq;
+ u32 tx_max, tx_min, tx_cur;
+ u32 rx_max, rx_min, rx_cur;
+ int status = 0;
+
+ if (coalesce->use_adaptive_tx_coalesce == 1)
+ return -EINVAL;
+
+ adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
+ if (adapter->max_rx_coal > MAX_SKB_FRAGS)
+ adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+
+ /* if AIC is being turned on now, start with an EQD of 0 */
+ if (rx_eq->enable_aic == 0 &&
+ coalesce->use_adaptive_rx_coalesce == 1) {
+ rx_eq->cur_eqd = 0;
+ }
+ rx_eq->enable_aic = coalesce->use_adaptive_rx_coalesce;
+
+ rx_max = coalesce->rx_coalesce_usecs_high;
+ rx_min = coalesce->rx_coalesce_usecs_low;
+ rx_cur = coalesce->rx_coalesce_usecs;
+
+ tx_max = coalesce->tx_coalesce_usecs_high;
+ tx_min = coalesce->tx_coalesce_usecs_low;
+ tx_cur = coalesce->tx_coalesce_usecs;
+
+ if (tx_cur > BE_MAX_EQD)
+ tx_cur = BE_MAX_EQD;
+ if (tx_eq->cur_eqd != tx_cur) {
+ status = be_cmd_modify_eqd(ctrl, tx_eq->q.id, tx_cur);
+ if (!status)
+ tx_eq->cur_eqd = tx_cur;
+ }
+
+ if (rx_eq->enable_aic) {
+ if (rx_max > BE_MAX_EQD)
+ rx_max = BE_MAX_EQD;
+ if (rx_min > rx_max)
+ rx_min = rx_max;
+ rx_eq->max_eqd = rx_max;
+ rx_eq->min_eqd = rx_min;
+ if (rx_eq->cur_eqd > rx_max)
+ rx_eq->cur_eqd = rx_max;
+ if (rx_eq->cur_eqd < rx_min)
+ rx_eq->cur_eqd = rx_min;
+ } else {
+ if (rx_cur > BE_MAX_EQD)
+ rx_cur = BE_MAX_EQD;
+ if (rx_eq->cur_eqd != rx_cur) {
+ status = be_cmd_modify_eqd(ctrl, rx_eq->q.id, rx_cur);
+ if (!status)
+ rx_eq->cur_eqd = rx_cur;
+ }
+ }
+ return 0;
+}
+
+static u32 be_get_rx_csum(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ return adapter->rx_csum;
+}
+
+static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ if (data)
+ adapter->rx_csum = true;
+ else
+ adapter->rx_csum = false;
+
+ return 0;
+}
+
+static void
+be_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, uint64_t *data)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_drvr_stats *drvr_stats = &adapter->stats.drvr_stats;
+ struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
+ struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
+ struct be_port_rxf_stats *port_stats =
+ &rxf_stats->port[adapter->port_num];
+ struct net_device_stats *net_stats = &adapter->stats.net_stats;
+ struct be_erx_stats *erx_stats = &hw_stats->erx;
+ void *p = NULL;
+ int i;
+
+ for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
+ switch (et_stats[i].type) {
+ case NETSTAT:
+ p = net_stats;
+ break;
+ case DRVSTAT:
+ p = drvr_stats;
+ break;
+ case PORTSTAT:
+ p = port_stats;
+ break;
+ case MISCSTAT:
+ p = rxf_stats;
+ break;
+ case ERXSTAT: /* Currently only one ERX stat is provided */
+ p = (u32 *)erx_stats + adapter->rx_obj.q.id;
+ break;
+ }
+
+ p = (u8 *)p + et_stats[i].offset;
+ data[i] = (et_stats[i].size == sizeof(u64)) ?
+ *(u64 *)p: *(u32 *)p;
+ }
+
+ return;
+}
+
+static void
+be_get_stat_strings(struct net_device *netdev, uint32_t stringset,
+ uint8_t *data)
+{
+ int i;
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < ETHTOOL_STATS_NUM; i++) {
+ memcpy(data, et_stats[i].desc, ETH_GSTRING_LEN);
+ data += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static int be_get_stats_count(struct net_device *netdev)
+{
+ return ETHTOOL_STATS_NUM;
+}
+
+static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ ecmd->speed = SPEED_10000;
+ ecmd->duplex = DUPLEX_FULL;
+ ecmd->autoneg = AUTONEG_DISABLE;
+ return 0;
+}
+
+static void
+be_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ ring->rx_max_pending = adapter->rx_obj.q.len;
+ ring->tx_max_pending = adapter->tx_obj.q.len;
+
+ ring->rx_pending = atomic_read(&adapter->rx_obj.q.used);
+ ring->tx_pending = atomic_read(&adapter->tx_obj.q.used);
+}
+
+static void
+be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause,
+ &ecmd->rx_pause);
+ ecmd->autoneg = AUTONEG_ENABLE;
+}
+
+static int
+be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ int status;
+
+ if (ecmd->autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+
+ status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause,
+ ecmd->rx_pause);
+ if (!status)
+ dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
+
+ return status;
+}
+
+struct ethtool_ops be_ethtool_ops = {
+ .get_settings = be_get_settings,
+ .get_drvinfo = be_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_coalesce = be_get_coalesce,
+ .set_coalesce = be_set_coalesce,
+ .get_ringparam = be_get_ringparam,
+ .get_pauseparam = be_get_pauseparam,
+ .set_pauseparam = be_set_pauseparam,
+ .get_rx_csum = be_get_rx_csum,
+ .set_rx_csum = be_set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+ .get_strings = be_get_stat_strings,
+ .get_stats_count = be_get_stats_count,
+ .get_ethtool_stats = be_get_ethtool_stats,
+};
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
new file mode 100644
index 0000000..b132aa4
--- /dev/null
+++ b/drivers/net/benet/be_hw.h
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+/********* Mailbox door bell *************/
+/* Used for driver communication with the FW.
+ * The software must write this register twice to post any command. First,
+ * it writes the register with hi=1 and the upper bits of the physical address
+ * for the MAILBOX structure. Software must poll the ready bit until this
+ * is acknowledged. Then, sotware writes the register with hi=0 with the lower
+ * bits in the address. It must poll the ready bit until the command is
+ * complete. Upon completion, the MAILBOX will contain a valid completion
+ * queue entry.
+ */
+#define MPU_MAILBOX_DB_OFFSET 0x160
+#define MPU_MAILBOX_DB_RDY_MASK 0x1 /* bit 0 */
+#define MPU_MAILBOX_DB_HI_MASK 0x2 /* bit 1 */
+
+#define MPU_EP_CONTROL 0
+
+/********** MPU semphore ******************/
+#define MPU_EP_SEMAPHORE_OFFSET 0xac
+#define EP_SEMAPHORE_POST_STAGE_MASK 0x0000FFFF
+#define EP_SEMAPHORE_POST_ERR_MASK 0x1
+#define EP_SEMAPHORE_POST_ERR_SHIFT 31
+/* MPU semphore POST stage values */
+#define POST_STAGE_AWAITING_HOST_RDY 0x1 /* FW awaiting goahead from host */
+#define POST_STAGE_HOST_RDY 0x2 /* Host has given go-ahed to FW */
+#define POST_STAGE_BE_RESET 0x3 /* Host wants to reset chip */
+#define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */
+
+/********* Memory BAR register ************/
+#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc
+/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
+ * Disable" may still globally block interrupts in addition to individual
+ * interrupt masks; a mechanism for the device driver to block all interrupts
+ * atomically without having to arbitrate for the PCI Interrupt Disable bit
+ * with the OS.
+ */
+#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
+/* PCI physical function number */
+#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK 0x7 /* bits 26 - 28 */
+#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT 26
+
+/********* Event Q door bell *************/
+#define DB_EQ_OFFSET DB_CQ_OFFSET
+#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
+/* Clear the interrupt for this eq */
+#define DB_EQ_CLR_SHIFT (9) /* bit 9 */
+/* Must be 1 */
+#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
+/* Number of event entries processed */
+#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
+/* Rearm bit */
+#define DB_EQ_REARM_SHIFT (29) /* bit 29 */
+
+/********* Compl Q door bell *************/
+#define DB_CQ_OFFSET 0x120
+#define DB_CQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
+/* Number of event entries processed */
+#define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
+/* Rearm bit */
+#define DB_CQ_REARM_SHIFT (29) /* bit 29 */
+
+/********** TX ULP door bell *************/
+#define DB_TXULP1_OFFSET 0x60
+#define DB_TXULP_RING_ID_MASK 0x7FF /* bits 0 - 10 */
+/* Number of tx entries posted */
+#define DB_TXULP_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
+#define DB_TXULP_NUM_POSTED_MASK 0x3FFF /* bits 16 - 29 */
+
+/********** RQ(erx) door bell ************/
+#define DB_RQ_OFFSET 0x100
+#define DB_RQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
+/* Number of rx frags posted */
+#define DB_RQ_NUM_POSTED_SHIFT (24) /* bits 24 - 31 */
+
+/*
+ * BE descriptors: host memory data structures whose formats
+ * are hardwired in BE silicon.
+ */
+/* Event Queue Descriptor */
+#define EQ_ENTRY_VALID_MASK 0x1 /* bit 0 */
+#define EQ_ENTRY_RES_ID_MASK 0xFFFF /* bits 16 - 31 */
+#define EQ_ENTRY_RES_ID_SHIFT 16
+struct be_eq_entry {
+ u32 evt;
+};
+
+/* TX Queue Descriptor */
+#define ETH_WRB_FRAG_LEN_MASK 0xFFFF
+struct be_eth_wrb {
+ u32 frag_pa_hi; /* dword 0 */
+ u32 frag_pa_lo; /* dword 1 */
+ u32 rsvd0; /* dword 2 */
+ u32 frag_len; /* dword 3: bits 0 - 15 */
+} __packed;
+
+/* Pseudo amap definition for eth_hdr_wrb in which each bit of the
+ * actual structure is defined as a byte : used to calculate
+ * offset/shift/mask of each field */
+struct amap_eth_hdr_wrb {
+ u8 rsvd0[32]; /* dword 0 */
+ u8 rsvd1[32]; /* dword 1 */
+ u8 complete; /* dword 2 */
+ u8 event;
+ u8 crc;
+ u8 forward;
+ u8 ipsec;
+ u8 mgmt;
+ u8 ipcs;
+ u8 udpcs;
+ u8 tcpcs;
+ u8 lso;
+ u8 vlan;
+ u8 gso[2];
+ u8 num_wrb[5];
+ u8 lso_mss[14];
+ u8 len[16]; /* dword 3 */
+ u8 vlan_tag[16];
+} __packed;
+
+struct be_eth_hdr_wrb {
+ u32 dw[4];
+};
+
+/* TX Compl Queue Descriptor */
+
+/* Pseudo amap definition for eth_tx_compl in which each bit of the
+ * actual structure is defined as a byte: used to calculate
+ * offset/shift/mask of each field */
+struct amap_eth_tx_compl {
+ u8 wrb_index[16]; /* dword 0 */
+ u8 ct[2]; /* dword 0 */
+ u8 port[2]; /* dword 0 */
+ u8 rsvd0[8]; /* dword 0 */
+ u8 status[4]; /* dword 0 */
+ u8 user_bytes[16]; /* dword 1 */
+ u8 nwh_bytes[8]; /* dword 1 */
+ u8 lso; /* dword 1 */
+ u8 cast_enc[2]; /* dword 1 */
+ u8 rsvd1[5]; /* dword 1 */
+ u8 rsvd2[32]; /* dword 2 */
+ u8 pkts[16]; /* dword 3 */
+ u8 ringid[11]; /* dword 3 */
+ u8 hash_val[4]; /* dword 3 */
+ u8 valid; /* dword 3 */
+} __packed;
+
+struct be_eth_tx_compl {
+ u32 dw[4];
+};
+
+/* RX Queue Descriptor */
+struct be_eth_rx_d {
+ u32 fragpa_hi;
+ u32 fragpa_lo;
+};
+
+/* RX Compl Queue Descriptor */
+
+/* Pseudo amap definition for eth_rx_compl in which each bit of the
+ * actual structure is defined as a byte: used to calculate
+ * offset/shift/mask of each field */
+struct amap_eth_rx_compl {
+ u8 vlan_tag[16]; /* dword 0 */
+ u8 pktsize[14]; /* dword 0 */
+ u8 port; /* dword 0 */
+ u8 ip_opt; /* dword 0 */
+ u8 err; /* dword 1 */
+ u8 rsshp; /* dword 1 */
+ u8 ipf; /* dword 1 */
+ u8 tcpf; /* dword 1 */
+ u8 udpf; /* dword 1 */
+ u8 ipcksm; /* dword 1 */
+ u8 l4_cksm; /* dword 1 */
+ u8 ip_version; /* dword 1 */
+ u8 macdst[6]; /* dword 1 */
+ u8 vtp; /* dword 1 */
+ u8 rsvd0; /* dword 1 */
+ u8 fragndx[10]; /* dword 1 */
+ u8 ct[2]; /* dword 1 */
+ u8 sw; /* dword 1 */
+ u8 numfrags[3]; /* dword 1 */
+ u8 rss_flush; /* dword 2 */
+ u8 cast_enc[2]; /* dword 2 */
+ u8 qnq; /* dword 2 */
+ u8 rss_bank; /* dword 2 */
+ u8 rsvd1[23]; /* dword 2 */
+ u8 lro_pkt; /* dword 2 */
+ u8 rsvd2[2]; /* dword 2 */
+ u8 valid; /* dword 2 */
+ u8 rsshash[32]; /* dword 3 */
+} __packed;
+
+struct be_eth_rx_compl {
+ u32 dw[4];
+};
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
new file mode 100644
index 0000000..0ecaffb
--- /dev/null
+++ b/drivers/net/benet/be_main.c
@@ -0,0 +1,1911 @@
+/*
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+
+MODULE_VERSION(DRV_VER);
+MODULE_DEVICE_TABLE(pci, be_dev_ids);
+MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
+MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_LICENSE("GPL");
+
+static unsigned int rx_frag_size = 2048;
+module_param(rx_frag_size, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
+
+#define BE_VENDOR_ID 0x19a2
+#define BE2_DEVICE_ID_1 0x0211
+static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
+ { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, be_dev_ids);
+
+static void be_queue_free(struct be_adapter *adapter, struct be_queue_info *q)
+{
+ struct be_dma_mem *mem = &q->dma_mem;
+ if (mem->va)
+ pci_free_consistent(adapter->pdev, mem->size,
+ mem->va, mem->dma);
+}
+
+static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q,
+ u16 len, u16 entry_size)
+{
+ struct be_dma_mem *mem = &q->dma_mem;
+
+ memset(q, 0, sizeof(*q));
+ q->len = len;
+ q->entry_size = entry_size;
+ mem->size = len * entry_size;
+ mem->va = pci_alloc_consistent(adapter->pdev, mem->size, &mem->dma);
+ if (!mem->va)
+ return -1;
+ memset(mem->va, 0, mem->size);
+ return 0;
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+ return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+ return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+ index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+ index_inc(&q->tail, q->len);
+}
+
+static void be_intr_set(struct be_ctrl_info *ctrl, bool enable)
+{
+ u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
+ u32 reg = ioread32(addr);
+ u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ if (!enabled && enable) {
+ reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ } else if (enabled && !enable) {
+ reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ } else {
+ printk(KERN_WARNING DRV_NAME
+ ": bad value in membar_int_ctrl reg=0x%x\n", reg);
+ return;
+ }
+ iowrite32(reg, addr);
+}
+
+static void be_rxq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+{
+ u32 val = 0;
+ val |= qid & DB_RQ_RING_ID_MASK;
+ val |= posted << DB_RQ_NUM_POSTED_SHIFT;
+ iowrite32(val, ctrl->db + DB_RQ_OFFSET);
+}
+
+static void be_txq_notify(struct be_ctrl_info *ctrl, u16 qid, u16 posted)
+{
+ u32 val = 0;
+ val |= qid & DB_TXULP_RING_ID_MASK;
+ val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT;
+ iowrite32(val, ctrl->db + DB_TXULP1_OFFSET);
+}
+
+static void be_eq_notify(struct be_ctrl_info *ctrl, u16 qid,
+ bool arm, bool clear_int, u16 num_popped)
+{
+ u32 val = 0;
+ val |= qid & DB_EQ_RING_ID_MASK;
+ if (arm)
+ val |= 1 << DB_EQ_REARM_SHIFT;
+ if (clear_int)
+ val |= 1 << DB_EQ_CLR_SHIFT;
+ val |= 1 << DB_EQ_EVNT_SHIFT;
+ val |= num_popped << DB_EQ_NUM_POPPED_SHIFT;
+ iowrite32(val, ctrl->db + DB_EQ_OFFSET);
+}
+
+static void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
+ bool arm, u16 num_popped)
+{
+ u32 val = 0;
+ val |= qid & DB_CQ_RING_ID_MASK;
+ if (arm)
+ val |= 1 << DB_CQ_REARM_SHIFT;
+ val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
+ iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+}
+
+
+static int be_mac_addr_set(struct net_device *netdev, void *p)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+ int status = 0;
+
+ if (netif_running(netdev)) {
+ status = be_cmd_pmac_del(&adapter->ctrl, adapter->if_handle,
+ adapter->pmac_id);
+ if (status)
+ return status;
+
+ status = be_cmd_pmac_add(&adapter->ctrl, (u8 *)addr->sa_data,
+ adapter->if_handle, &adapter->pmac_id);
+ }
+
+ if (!status)
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ return status;
+}
+
+static void netdev_stats_update(struct be_adapter *adapter)
+{
+ struct be_hw_stats *hw_stats = hw_stats_from_cmd(adapter->stats.cmd.va);
+ struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
+ struct be_port_rxf_stats *port_stats =
+ &rxf_stats->port[adapter->port_num];
+ struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+
+ dev_stats->rx_packets = port_stats->rx_total_frames;
+ dev_stats->tx_packets = port_stats->tx_unicastframes +
+ port_stats->tx_multicastframes + port_stats->tx_broadcastframes;
+ dev_stats->rx_bytes = (u64) port_stats->rx_bytes_msd << 32 |
+ (u64) port_stats->rx_bytes_lsd;
+ dev_stats->tx_bytes = (u64) port_stats->tx_bytes_msd << 32 |
+ (u64) port_stats->tx_bytes_lsd;
+
+ /* bad pkts received */
+ dev_stats->rx_errors = port_stats->rx_crc_errors +
+ port_stats->rx_alignment_symbol_errors +
+ port_stats->rx_in_range_errors +
+ port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+
+ /* packet transmit problems */
+ dev_stats->tx_errors = 0;
+
+ /* no space in linux buffers */
+ dev_stats->rx_dropped = 0;
+
+ /* no space available in linux */
+ dev_stats->tx_dropped = 0;
+
+ dev_stats->multicast = port_stats->tx_multicastframes;
+ dev_stats->collisions = 0;
+
+ /* detailed rx errors */
+ dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
+ port_stats->rx_out_range_errors + port_stats->rx_frame_too_long;
+ /* receive ring buffer overflow */
+ dev_stats->rx_over_errors = 0;
+ dev_stats->rx_crc_errors = port_stats->rx_crc_errors;
+
+ /* frame alignment errors */
+ dev_stats->rx_frame_errors = port_stats->rx_alignment_symbol_errors;
+ /* receiver fifo overrun */
+ /* drops_no_pbuf is no per i/f, it's per BE card */
+ dev_stats->rx_fifo_errors = port_stats->rx_fifo_overflow +
+ port_stats->rx_input_fifo_overflow +
+ rxf_stats->rx_drops_no_pbuf;
+ /* receiver missed packetd */
+ dev_stats->rx_missed_errors = 0;
+ /* detailed tx_errors */
+ dev_stats->tx_aborted_errors = 0;
+ dev_stats->tx_carrier_errors = 0;
+ dev_stats->tx_fifo_errors = 0;
+ dev_stats->tx_heartbeat_errors = 0;
+ dev_stats->tx_window_errors = 0;
+}
+
+static void be_link_status_update(struct be_adapter *adapter)
+{
+ struct be_link_info *prev = &adapter->link;
+ struct be_link_info now = { 0 };
+ struct net_device *netdev = adapter->netdev;
+
+ be_cmd_link_status_query(&adapter->ctrl, &now);
+
+ /* If link came up or went down */
+ if (now.speed != prev->speed && (now.speed == PHY_LINK_SPEED_ZERO ||
+ prev->speed == PHY_LINK_SPEED_ZERO)) {
+ if (now.speed == PHY_LINK_SPEED_ZERO) {
+ netif_stop_queue(netdev);
+ netif_carrier_off(netdev);
+ printk(KERN_INFO "%s: Link down\n", netdev->name);
+ } else {
+ netif_start_queue(netdev);
+ netif_carrier_on(netdev);
+ printk(KERN_INFO "%s: Link up\n", netdev->name);
+ }
+ }
+ *prev = now;
+}
+
+/* Update the EQ delay n BE based on the RX frags consumed / sec */
+static void be_rx_eqd_update(struct be_adapter *adapter)
+{
+ u32 eqd;
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+
+ /* Update once a second */
+ if (((jiffies - stats->rx_fps_jiffies) < HZ) || rx_eq->enable_aic == 0)
+ return;
+
+ stats->be_rx_fps = (stats->be_rx_frags - stats->be_prev_rx_frags) /
+ ((jiffies - stats->rx_fps_jiffies) / HZ);
+
+ stats->rx_fps_jiffies = jiffies;
+ stats->be_prev_rx_frags = stats->be_rx_frags;
+ eqd = stats->be_rx_fps / 110000;
+ eqd = eqd << 3;
+ if (eqd > rx_eq->max_eqd)
+ eqd = rx_eq->max_eqd;
+ if (eqd < rx_eq->min_eqd)
+ eqd = rx_eq->min_eqd;
+ if (eqd < 10)
+ eqd = 0;
+ if (eqd != rx_eq->cur_eqd)
+ be_cmd_modify_eqd(ctrl, rx_eq->q.id, eqd);
+
+ rx_eq->cur_eqd = eqd;
+}
+
+static struct net_device_stats *be_get_stats(struct net_device *dev)
+{
+ struct be_adapter *adapter = netdev_priv(dev);
+
+ return &adapter->stats.net_stats;
+}
+
+static void be_tx_stats_update(struct be_adapter *adapter,
+ u32 wrb_cnt, u32 copied, bool stopped)
+{
+ struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+ stats->be_tx_reqs++;
+ stats->be_tx_wrbs += wrb_cnt;
+ stats->be_tx_bytes += copied;
+ if (stopped)
+ stats->be_tx_stops++;
+
+ /* Update tx rate once in two seconds */
+ if ((jiffies - stats->be_tx_jiffies) > 2 * HZ) {
+ u32 r;
+ r = (stats->be_tx_bytes - stats->be_tx_bytes_prev) /
+ ((u32) (jiffies - stats->be_tx_jiffies) / HZ);
+ r = (r / 1000000); /* M bytes/s */
+ stats->be_tx_rate = (r * 8); /* M bits/s */
+ stats->be_tx_jiffies = jiffies;
+ stats->be_tx_bytes_prev = stats->be_tx_bytes;
+ }
+}
+
+/* Determine number of WRB entries needed to xmit data in an skb */
+static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
+{
+ int cnt = 0;
+ while (skb) {
+ if (skb->len > skb->data_len)
+ cnt++;
+ cnt += skb_shinfo(skb)->nr_frags;
+ skb = skb_shinfo(skb)->frag_list;
+ }
+ /* to account for hdr wrb */
+ cnt++;
+ if (cnt & 1) {
+ /* add a dummy to make it an even num */
+ cnt++;
+ *dummy = true;
+ } else
+ *dummy = false;
+ BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
+ return cnt;
+}
+
+static inline void wrb_fill(struct be_eth_wrb *wrb, u64 addr, int len)
+{
+ wrb->frag_pa_hi = upper_32_bits(addr);
+ wrb->frag_pa_lo = addr & 0xFFFFFFFF;
+ wrb->frag_len = len & ETH_WRB_FRAG_LEN_MASK;
+}
+
+static void wrb_fill_hdr(struct be_eth_hdr_wrb *hdr, struct sk_buff *skb,
+ bool vlan, u32 wrb_cnt, u32 len)
+{
+ memset(hdr, 0, sizeof(*hdr));
+
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, crc, hdr, 1);
+
+ if (skb_shinfo(skb)->gso_segs > 1 && skb_shinfo(skb)->gso_size) {
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso, hdr, 1);
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso_mss,
+ hdr, skb_shinfo(skb)->gso_size);
+ } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (is_tcp_pkt(skb))
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1);
+ else if (is_udp_pkt(skb))
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, udpcs, hdr, 1);
+ }
+
+ if (vlan && vlan_tx_tag_present(skb)) {
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan, hdr, 1);
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, vlan_tag,
+ hdr, vlan_tx_tag_get(skb));
+ }
+
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, event, hdr, 1);
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, complete, hdr, 1);
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, num_wrb, hdr, wrb_cnt);
+ AMAP_SET_BITS(struct amap_eth_hdr_wrb, len, hdr, len);
+}
+
+
+static int make_tx_wrbs(struct be_adapter *adapter,
+ struct sk_buff *skb, u32 wrb_cnt, bool dummy_wrb)
+{
+ u64 busaddr;
+ u32 i, copied = 0;
+ struct pci_dev *pdev = adapter->pdev;
+ struct sk_buff *first_skb = skb;
+ struct be_queue_info *txq = &adapter->tx_obj.q;
+ struct be_eth_wrb *wrb;
+ struct be_eth_hdr_wrb *hdr;
+
+ atomic_add(wrb_cnt, &txq->used);
+ hdr = queue_head_node(txq);
+ queue_head_inc(txq);
+
+ while (skb) {
+ if (skb->len > skb->data_len) {
+ int len = skb->len - skb->data_len;
+ busaddr = pci_map_single(pdev, skb->data, len,
+ PCI_DMA_TODEVICE);
+ wrb = queue_head_node(txq);
+ wrb_fill(wrb, busaddr, len);
+ be_dws_cpu_to_le(wrb, sizeof(*wrb));
+ queue_head_inc(txq);
+ copied += len;
+ }
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ struct skb_frag_struct *frag =
+ &skb_shinfo(skb)->frags[i];
+ busaddr = pci_map_page(pdev, frag->page,
+ frag->page_offset,
+ frag->size, PCI_DMA_TODEVICE);
+ wrb = queue_head_node(txq);
+ wrb_fill(wrb, busaddr, frag->size);
+ be_dws_cpu_to_le(wrb, sizeof(*wrb));
+ queue_head_inc(txq);
+ copied += frag->size;
+ }
+ skb = skb_shinfo(skb)->frag_list;
+ }
+
+ if (dummy_wrb) {
+ wrb = queue_head_node(txq);
+ wrb_fill(wrb, 0, 0);
+ be_dws_cpu_to_le(wrb, sizeof(*wrb));
+ queue_head_inc(txq);
+ }
+
+ wrb_fill_hdr(hdr, first_skb, adapter->vlan_grp ? true : false,
+ wrb_cnt, copied);
+ be_dws_cpu_to_le(hdr, sizeof(*hdr));
+
+ return copied;
+}
+
+static int be_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_tx_obj *tx_obj = &adapter->tx_obj;
+ struct be_queue_info *txq = &tx_obj->q;
+ u32 wrb_cnt = 0, copied = 0;
+ u32 start = txq->head;
+ bool dummy_wrb, stopped = false;
+
+ wrb_cnt = wrb_cnt_for_skb(skb, &dummy_wrb);
+
+ copied = make_tx_wrbs(adapter, skb, wrb_cnt, dummy_wrb);
+
+ /* record the sent skb in the sent_skb table */
+ BUG_ON(tx_obj->sent_skb_list[start]);
+ tx_obj->sent_skb_list[start] = skb;
+
+ /* Ensure that txq has space for the next skb; Else stop the queue
+ * *BEFORE* ringing the tx doorbell, so that we serialze the
+ * tx compls of the current transmit which'll wake up the queue
+ */
+ if ((BE_MAX_TX_FRAG_COUNT + atomic_read(&txq->used)) >= txq->len) {
+ netif_stop_queue(netdev);
+ stopped = true;
+ }
+
+ be_txq_notify(&adapter->ctrl, txq->id, wrb_cnt);
+
+ netdev->trans_start = jiffies;
+
+ be_tx_stats_update(adapter, wrb_cnt, copied, stopped);
+ return NETDEV_TX_OK;
+}
+
+static int be_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ if (new_mtu < BE_MIN_MTU ||
+ new_mtu > BE_MAX_JUMBO_FRAME_SIZE) {
+ dev_info(&adapter->pdev->dev,
+ "MTU must be between %d and %d bytes\n",
+ BE_MIN_MTU, BE_MAX_JUMBO_FRAME_SIZE);
+ return -EINVAL;
+ }
+ dev_info(&adapter->pdev->dev, "MTU changed from %d to %d bytes\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+/*
+ * if there are BE_NUM_VLANS_SUPPORTED or lesser number of VLANS configured,
+ * program them in BE. If more than BE_NUM_VLANS_SUPPORTED are configured,
+ * set the BE in promiscuous VLAN mode.
+ */
+static void be_vid_config(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ u16 vtag[BE_NUM_VLANS_SUPPORTED];
+ u16 ntags = 0, i;
+
+ if (adapter->num_vlans <= BE_NUM_VLANS_SUPPORTED) {
+ /* Construct VLAN Table to give to HW */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ if (adapter->vlan_tag[i]) {
+ vtag[ntags] = cpu_to_le16(i);
+ ntags++;
+ }
+ }
+ be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+ vtag, ntags, 1, 0);
+ } else {
+ be_cmd_vlan_config(&adapter->ctrl, adapter->if_handle,
+ NULL, 0, 1, 1);
+ }
+}
+
+static void be_vlan_register(struct net_device *netdev, struct vlan_group *grp)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ struct be_eq_obj *tx_eq = &adapter->tx_eq;
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+ be_eq_notify(ctrl, rx_eq->q.id, false, false, 0);
+ be_eq_notify(ctrl, tx_eq->q.id, false, false, 0);
+ adapter->vlan_grp = grp;
+ be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+ be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+}
+
+static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ adapter->num_vlans++;
+ adapter->vlan_tag[vid] = 1;
+
+ be_vid_config(netdev);
+}
+
+static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ adapter->num_vlans--;
+ adapter->vlan_tag[vid] = 0;
+
+ vlan_group_set_device(adapter->vlan_grp, vid, NULL);
+ be_vid_config(netdev);
+}
+
+static void be_set_multicast_filter(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct dev_mc_list *mc_ptr;
+ u8 mac_addr[32][ETH_ALEN];
+ int i = 0;
+
+ if (netdev->flags & IFF_ALLMULTI) {
+ /* set BE in Multicast promiscuous */
+ be_cmd_mcast_mac_set(&adapter->ctrl,
+ adapter->if_handle, NULL, 0, true);
+ return;
+ }
+
+ for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+ memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
+ if (++i >= 32) {
+ be_cmd_mcast_mac_set(&adapter->ctrl,
+ adapter->if_handle, &mac_addr[0][0], i, false);
+ i = 0;
+ }
+
+ }
+
+ if (i) {
+ /* reset the promiscuous mode also. */
+ be_cmd_mcast_mac_set(&adapter->ctrl,
+ adapter->if_handle, &mac_addr[0][0], i, false);
+ }
+}
+
+static void be_set_multicast_list(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ if (netdev->flags & IFF_PROMISC) {
+ be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 1);
+ } else {
+ be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 0);
+ be_set_multicast_filter(netdev);
+ }
+}
+
+static void be_rx_rate_update(struct be_adapter *adapter, u32 pktsize,
+ u16 numfrags)
+{
+ struct be_drvr_stats *stats = &adapter->stats.drvr_stats;
+ u32 rate;
+
+ stats->be_rx_compl++;
+ stats->be_rx_frags += numfrags;
+ stats->be_rx_bytes += pktsize;
+
+ /* Update the rate once in two seconds */
+ if ((jiffies - stats->be_rx_jiffies) < 2 * HZ)
+ return;
+
+ rate = (stats->be_rx_bytes - stats->be_rx_bytes_prev) /
+ ((u32) (jiffies - stats->be_rx_jiffies) / HZ);
+ rate = (rate / 1000000); /* MB/Sec */
+ stats->be_rx_rate = (rate * 8); /* Mega Bits/Sec */
+ stats->be_rx_jiffies = jiffies;
+ stats->be_rx_bytes_prev = stats->be_rx_bytes;
+}
+
+static struct be_rx_page_info *
+get_rx_page_info(struct be_adapter *adapter, u16 frag_idx)
+{
+ struct be_rx_page_info *rx_page_info;
+ struct be_queue_info *rxq = &adapter->rx_obj.q;
+
+ rx_page_info = &adapter->rx_obj.page_info_tbl[frag_idx];
+ BUG_ON(!rx_page_info->page);
+
+ if (rx_page_info->last_page_user)
+ pci_unmap_page(adapter->pdev, pci_unmap_addr(rx_page_info, bus),
+ adapter->big_page_size, PCI_DMA_FROMDEVICE);
+
+ atomic_dec(&rxq->used);
+ return rx_page_info;
+}
+
+/* Throwaway the data in the Rx completion */
+static void be_rx_compl_discard(struct be_adapter *adapter,
+ struct be_eth_rx_compl *rxcp)
+{
+ struct be_queue_info *rxq = &adapter->rx_obj.q;
+ struct be_rx_page_info *page_info;
+ u16 rxq_idx, i, num_rcvd;
+
+ rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+ num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+
+ for (i = 0; i < num_rcvd; i++) {
+ page_info = get_rx_page_info(adapter, rxq_idx);
+ put_page(page_info->page);
+ memset(page_info, 0, sizeof(*page_info));
+ index_inc(&rxq_idx, rxq->len);
+ }
+}
+
+/*
+ * skb_fill_rx_data forms a complete skb for an ether frame
+ * indicated by rxcp.
+ */
+static void skb_fill_rx_data(struct be_adapter *adapter,
+ struct sk_buff *skb, struct be_eth_rx_compl *rxcp)
+{
+ struct be_queue_info *rxq = &adapter->rx_obj.q;
+ struct be_rx_page_info *page_info;
+ u16 rxq_idx, i, num_rcvd;
+ u32 pktsize, hdr_len, curr_frag_len;
+ u8 *start;
+
+ rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+ pktsize = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
+ num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+
+ page_info = get_rx_page_info(adapter, rxq_idx);
+
+ start = page_address(page_info->page) + page_info->page_offset;
+ prefetch(start);
+
+ /* Copy data in the first descriptor of this completion */
+ curr_frag_len = min(pktsize, rx_frag_size);
+
+ /* Copy the header portion into skb_data */
+ hdr_len = min((u32)BE_HDR_LEN, curr_frag_len);
+ memcpy(skb->data, start, hdr_len);
+ skb->len = curr_frag_len;
+ if (curr_frag_len <= BE_HDR_LEN) { /* tiny packet */
+ /* Complete packet has now been moved to data */
+ put_page(page_info->page);
+ skb->data_len = 0;
+ skb->tail += curr_frag_len;
+ } else {
+ skb_shinfo(skb)->nr_frags = 1;
+ skb_shinfo(skb)->frags[0].page = page_info->page;
+ skb_shinfo(skb)->frags[0].page_offset =
+ page_info->page_offset + hdr_len;
+ skb_shinfo(skb)->frags[0].size = curr_frag_len - hdr_len;
+ skb->data_len = curr_frag_len - hdr_len;
+ skb->tail += hdr_len;
+ }
+ memset(page_info, 0, sizeof(*page_info));
+
+ if (pktsize <= rx_frag_size) {
+ BUG_ON(num_rcvd != 1);
+ return;
+ }
+
+ /* More frags present for this completion */
+ pktsize -= curr_frag_len; /* account for above copied frag */
+ for (i = 1; i < num_rcvd; i++) {
+ index_inc(&rxq_idx, rxq->len);
+ page_info = get_rx_page_info(adapter, rxq_idx);
+
+ curr_frag_len = min(pktsize, rx_frag_size);
+
+ skb_shinfo(skb)->frags[i].page = page_info->page;
+ skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
+ skb_shinfo(skb)->frags[i].size = curr_frag_len;
+ skb->len += curr_frag_len;
+ skb->data_len += curr_frag_len;
+ skb_shinfo(skb)->nr_frags++;
+ pktsize -= curr_frag_len;
+
+ memset(page_info, 0, sizeof(*page_info));
+ }
+
+ be_rx_rate_update(adapter, pktsize, num_rcvd);
+ return;
+}
+
+/* Process the RX completion indicated by rxcp when LRO is disabled */
+static void be_rx_compl_process(struct be_adapter *adapter,
+ struct be_eth_rx_compl *rxcp)
+{
+ struct sk_buff *skb;
+ u32 vtp, vid;
+ int l4_cksm;
+
+ l4_cksm = AMAP_GET_BITS(struct amap_eth_rx_compl, l4_cksm, rxcp);
+ vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+
+ skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
+ if (!skb) {
+ if (net_ratelimit())
+ dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
+ be_rx_compl_discard(adapter, rxcp);
+ return;
+ }
+
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ skb_fill_rx_data(adapter, skb, rxcp);
+
+ if (l4_cksm && adapter->rx_csum)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ skb->truesize = skb->len + sizeof(struct sk_buff);
+ skb->protocol = eth_type_trans(skb, adapter->netdev);
+ skb->dev = adapter->netdev;
+
+ if (vtp) {
+ if (!adapter->vlan_grp || adapter->num_vlans == 0) {
+ kfree_skb(skb);
+ return;
+ }
+ vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
+ vid = be16_to_cpu(vid);
+ vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
+ } else {
+ netif_receive_skb(skb);
+ }
+
+ adapter->netdev->last_rx = jiffies;
+
+ return;
+}
+
+/* Process the RX completion indicated by rxcp when LRO is enabled */
+static void be_rx_compl_process_lro(struct be_adapter *adapter,
+ struct be_eth_rx_compl *rxcp)
+{
+ struct be_rx_page_info *page_info;
+ struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
+ struct be_queue_info *rxq = &adapter->rx_obj.q;
+ u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
+ u16 i, rxq_idx = 0, vid;
+
+ num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
+ pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
+ vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+ rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+
+ remaining = pkt_size;
+ for (i = 0; i < num_rcvd; i++) {
+ page_info = get_rx_page_info(adapter, rxq_idx);
+
+ curr_frag_len = min(remaining, rx_frag_size);
+
+ rx_frags[i].page = page_info->page;
+ rx_frags[i].page_offset = page_info->page_offset;
+ rx_frags[i].size = curr_frag_len;
+ remaining -= curr_frag_len;
+
+ index_inc(&rxq_idx, rxq->len);
+
+ memset(page_info, 0, sizeof(*page_info));
+ }
+
+ if (likely(!vlanf)) {
+ lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
+ pkt_size, NULL, 0);
+ } else {
+ vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
+ vid = be16_to_cpu(vid);
+
+ if (!adapter->vlan_grp || adapter->num_vlans == 0)
+ return;
+
+ lro_vlan_hwaccel_receive_frags(&adapter->rx_obj.lro_mgr,
+ rx_frags, pkt_size, pkt_size, adapter->vlan_grp,
+ vid, NULL, 0);
+ }
+
+ be_rx_rate_update(adapter, pkt_size, num_rcvd);
+ return;
+}
+
+static struct be_eth_rx_compl *be_rx_compl_get(struct be_adapter *adapter)
+{
+ struct be_eth_rx_compl *rxcp = queue_tail_node(&adapter->rx_obj.cq);
+
+ if (rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] == 0)
+ return NULL;
+
+ be_dws_le_to_cpu(rxcp, sizeof(*rxcp));
+
+ rxcp->dw[offsetof(struct amap_eth_rx_compl, valid) / 32] = 0;
+
+ queue_tail_inc(&adapter->rx_obj.cq);
+ return rxcp;
+}
+
+static inline struct page *be_alloc_pages(u32 size)
+{
+ gfp_t alloc_flags = GFP_ATOMIC;
+ u32 order = get_order(size);
+ if (order > 0)
+ alloc_flags |= __GFP_COMP;
+ return alloc_pages(alloc_flags, order);
+}
+
+/*
+ * Allocate a page, split it to fragments of size rx_frag_size and post as
+ * receive buffers to BE
+ */
+static void be_post_rx_frags(struct be_adapter *adapter)
+{
+ struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
+ struct be_rx_page_info *page_info = NULL;
+ struct be_queue_info *rxq = &adapter->rx_obj.q;
+ struct page *pagep = NULL;
+ struct be_eth_rx_d *rxd;
+ u64 page_dmaaddr = 0, frag_dmaaddr;
+ u32 posted, page_offset = 0;
+
+
+ page_info = &page_info_tbl[rxq->head];
+ for (posted = 0; posted < MAX_RX_POST && !page_info->page; posted++) {
+ if (!pagep) {
+ pagep = be_alloc_pages(adapter->big_page_size);
+ if (unlikely(!pagep)) {
+ drvr_stats(adapter)->be_ethrx_post_fail++;
+ break;
+ }
+ page_dmaaddr = pci_map_page(adapter->pdev, pagep, 0,
+ adapter->big_page_size,
+ PCI_DMA_FROMDEVICE);
+ page_info->page_offset = 0;
+ } else {
+ get_page(pagep);
+ page_info->page_offset = page_offset + rx_frag_size;
+ }
+ page_offset = page_info->page_offset;
+ page_info->page = pagep;
+ pci_unmap_addr_set(page_info, bus, page_dmaaddr);
+ frag_dmaaddr = page_dmaaddr + page_info->page_offset;
+
+ rxd = queue_head_node(rxq);
+ rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
+ rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
+ queue_head_inc(rxq);
+
+ /* Any space left in the current big page for another frag? */
+ if ((page_offset + rx_frag_size + rx_frag_size) >
+ adapter->big_page_size) {
+ pagep = NULL;
+ page_info->last_page_user = true;
+ }
+ page_info = &page_info_tbl[rxq->head];
+ }
+ if (pagep)
+ page_info->last_page_user = true;
+
+ if (posted) {
+ atomic_add(posted, &rxq->used);
+ be_rxq_notify(&adapter->ctrl, rxq->id, posted);
+ } else if (atomic_read(&rxq->used) == 0) {
+ /* Let be_worker replenish when memory is available */
+ adapter->rx_post_starved = true;
+ }
+
+ return;
+}
+
+static struct be_eth_tx_compl *
+be_tx_compl_get(struct be_adapter *adapter)
+{
+ struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
+ struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
+
+ if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
+ return NULL;
+
+ be_dws_le_to_cpu(txcp, sizeof(*txcp));
+
+ txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] = 0;
+
+ queue_tail_inc(tx_cq);
+ return txcp;
+}
+
+static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
+{
+ struct be_queue_info *txq = &adapter->tx_obj.q;
+ struct be_eth_wrb *wrb;
+ struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+ struct sk_buff *sent_skb;
+ u64 busaddr;
+ u16 cur_index, num_wrbs = 0;
+
+ cur_index = txq->tail;
+ sent_skb = sent_skbs[cur_index];
+ BUG_ON(!sent_skb);
+ sent_skbs[cur_index] = NULL;
+
+ do {
+ cur_index = txq->tail;
+ wrb = queue_tail_node(txq);
+ be_dws_le_to_cpu(wrb, sizeof(*wrb));
+ busaddr = ((u64)wrb->frag_pa_hi << 32) | (u64)wrb->frag_pa_lo;
+ if (busaddr != 0) {
+ pci_unmap_single(adapter->pdev, busaddr,
+ wrb->frag_len, PCI_DMA_TODEVICE);
+ }
+ num_wrbs++;
+ queue_tail_inc(txq);
+ } while (cur_index != last_index);
+
+ atomic_sub(num_wrbs, &txq->used);
+
+ kfree_skb(sent_skb);
+}
+
+static void be_rx_q_clean(struct be_adapter *adapter)
+{
+ struct be_rx_page_info *page_info;
+ struct be_queue_info *rxq = &adapter->rx_obj.q;
+ struct be_queue_info *rx_cq = &adapter->rx_obj.cq;
+ struct be_eth_rx_compl *rxcp;
+ u16 tail;
+
+ /* First cleanup pending rx completions */
+ while ((rxcp = be_rx_compl_get(adapter)) != NULL) {
+ be_rx_compl_discard(adapter, rxcp);
+ be_cq_notify(&adapter->ctrl, rx_cq->id, true, 1);
+ }
+
+ /* Then free posted rx buffer that were not used */
+ tail = (rxq->head + rxq->len - atomic_read(&rxq->used)) % rxq->len;
+ for (; tail != rxq->head; index_inc(&tail, rxq->len)) {
+ page_info = get_rx_page_info(adapter, tail);
+ put_page(page_info->page);
+ memset(page_info, 0, sizeof(*page_info));
+ }
+ BUG_ON(atomic_read(&rxq->used));
+}
+
+static void be_tx_q_clean(struct be_adapter *adapter)
+{
+ struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
+ struct sk_buff *sent_skb;
+ struct be_queue_info *txq = &adapter->tx_obj.q;
+ u16 last_index;
+ bool dummy_wrb;
+
+ while (atomic_read(&txq->used)) {
+ sent_skb = sent_skbs[txq->tail];
+ last_index = txq->tail;
+ index_adv(&last_index,
+ wrb_cnt_for_skb(sent_skb, &dummy_wrb) - 1, txq->len);
+ be_tx_compl_process(adapter, last_index);
+ }
+}
+
+static void be_tx_queues_destroy(struct be_adapter *adapter)
+{
+ struct be_queue_info *q;
+
+ q = &adapter->tx_obj.q;
+ if (q->created)
+ be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_TXQ);
+ be_queue_free(adapter, q);
+
+ q = &adapter->tx_obj.cq;
+ if (q->created)
+ be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+ be_queue_free(adapter, q);
+
+ /* No more tx completions can be rcvd now; clean up if there are
+ * any pending completions or pending tx requests */
+ be_tx_q_clean(adapter);
+
+ q = &adapter->tx_eq.q;
+ if (q->created)
+ be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+ be_queue_free(adapter, q);
+}
+
+static int be_tx_queues_create(struct be_adapter *adapter)
+{
+ struct be_queue_info *eq, *q, *cq;
+
+ adapter->tx_eq.max_eqd = 0;
+ adapter->tx_eq.min_eqd = 0;
+ adapter->tx_eq.cur_eqd = 96;
+ adapter->tx_eq.enable_aic = false;
+ /* Alloc Tx Event queue */
+ eq = &adapter->tx_eq.q;
+ if (be_queue_alloc(adapter, eq, EVNT_Q_LEN, sizeof(struct be_eq_entry)))
+ return -1;
+
+ /* Ask BE to create Tx Event queue */
+ if (be_cmd_eq_create(&adapter->ctrl, eq, adapter->tx_eq.cur_eqd))
+ goto tx_eq_free;
+ /* Alloc TX eth compl queue */
+ cq = &adapter->tx_obj.cq;
+ if (be_queue_alloc(adapter, cq, TX_CQ_LEN,
+ sizeof(struct be_eth_tx_compl)))
+ goto tx_eq_destroy;
+
+ /* Ask BE to create Tx eth compl queue */
+ if (be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3))
+ goto tx_cq_free;
+
+ /* Alloc TX eth queue */
+ q = &adapter->tx_obj.q;
+ if (be_queue_alloc(adapter, q, TX_Q_LEN, sizeof(struct be_eth_wrb)))
+ goto tx_cq_destroy;
+
+ /* Ask BE to create Tx eth queue */
+ if (be_cmd_txq_create(&adapter->ctrl, q, cq))
+ goto tx_q_free;
+ return 0;
+
+tx_q_free:
+ be_queue_free(adapter, q);
+tx_cq_destroy:
+ be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+tx_cq_free:
+ be_queue_free(adapter, cq);
+tx_eq_destroy:
+ be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+tx_eq_free:
+ be_queue_free(adapter, eq);
+ return -1;
+}
+
+static void be_rx_queues_destroy(struct be_adapter *adapter)
+{
+ struct be_queue_info *q;
+
+ q = &adapter->rx_obj.q;
+ if (q->created) {
+ be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_RXQ);
+ be_rx_q_clean(adapter);
+ }
+ be_queue_free(adapter, q);
+
+ q = &adapter->rx_obj.cq;
+ if (q->created)
+ be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_CQ);
+ be_queue_free(adapter, q);
+
+ q = &adapter->rx_eq.q;
+ if (q->created)
+ be_cmd_q_destroy(&adapter->ctrl, q, QTYPE_EQ);
+ be_queue_free(adapter, q);
+}
+
+static int be_rx_queues_create(struct be_adapter *adapter)
+{
+ struct be_queue_info *eq, *q, *cq;
+ int rc;
+
+ adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
+ adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
+ adapter->rx_eq.max_eqd = BE_MAX_EQD;
+ adapter->rx_eq.min_eqd = 0;
+ adapter->rx_eq.cur_eqd = 0;
+ adapter->rx_eq.enable_aic = true;
+
+ /* Alloc Rx Event queue */
+ eq = &adapter->rx_eq.q;
+ rc = be_queue_alloc(adapter, eq, EVNT_Q_LEN,
+ sizeof(struct be_eq_entry));
+ if (rc)
+ return rc;
+
+ /* Ask BE to create Rx Event queue */
+ rc = be_cmd_eq_create(&adapter->ctrl, eq, adapter->rx_eq.cur_eqd);
+ if (rc)
+ goto rx_eq_free;
+
+ /* Alloc RX eth compl queue */
+ cq = &adapter->rx_obj.cq;
+ rc = be_queue_alloc(adapter, cq, RX_CQ_LEN,
+ sizeof(struct be_eth_rx_compl));
+ if (rc)
+ goto rx_eq_destroy;
+
+ /* Ask BE to create Rx eth compl queue */
+ rc = be_cmd_cq_create(&adapter->ctrl, cq, eq, false, false, 3);
+ if (rc)
+ goto rx_cq_free;
+
+ /* Alloc RX eth queue */
+ q = &adapter->rx_obj.q;
+ rc = be_queue_alloc(adapter, q, RX_Q_LEN, sizeof(struct be_eth_rx_d));
+ if (rc)
+ goto rx_cq_destroy;
+
+ /* Ask BE to create Rx eth queue */
+ rc = be_cmd_rxq_create(&adapter->ctrl, q, cq->id, rx_frag_size,
+ BE_MAX_JUMBO_FRAME_SIZE, adapter->if_handle, false);
+ if (rc)
+ goto rx_q_free;
+
+ return 0;
+rx_q_free:
+ be_queue_free(adapter, q);
+rx_cq_destroy:
+ be_cmd_q_destroy(&adapter->ctrl, cq, QTYPE_CQ);
+rx_cq_free:
+ be_queue_free(adapter, cq);
+rx_eq_destroy:
+ be_cmd_q_destroy(&adapter->ctrl, eq, QTYPE_EQ);
+rx_eq_free:
+ be_queue_free(adapter, eq);
+ return rc;
+}
+static bool event_get(struct be_eq_obj *eq_obj, u16 *rid)
+{
+ struct be_eq_entry *entry = queue_tail_node(&eq_obj->q);
+ u32 evt = entry->evt;
+
+ if (!evt)
+ return false;
+
+ evt = le32_to_cpu(evt);
+ *rid = (evt >> EQ_ENTRY_RES_ID_SHIFT) & EQ_ENTRY_RES_ID_MASK;
+ entry->evt = 0;
+ queue_tail_inc(&eq_obj->q);
+ return true;
+}
+
+static int event_handle(struct be_ctrl_info *ctrl,
+ struct be_eq_obj *eq_obj)
+{
+ u16 rid = 0, num = 0;
+
+ while (event_get(eq_obj, &rid))
+ num++;
+
+ /* We can see an interrupt and no event */
+ be_eq_notify(ctrl, eq_obj->q.id, true, true, num);
+ if (num)
+ napi_schedule(&eq_obj->napi);
+
+ return num;
+}
+
+static irqreturn_t be_intx(int irq, void *dev)
+{
+ struct be_adapter *adapter = dev;
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ int rx, tx;
+
+ tx = event_handle(ctrl, &adapter->tx_eq);
+ rx = event_handle(ctrl, &adapter->rx_eq);
+
+ if (rx || tx)
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
+}
+
+static irqreturn_t be_msix_rx(int irq, void *dev)
+{
+ struct be_adapter *adapter = dev;
+
+ event_handle(&adapter->ctrl, &adapter->rx_eq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t be_msix_tx(int irq, void *dev)
+{
+ struct be_adapter *adapter = dev;
+
+ event_handle(&adapter->ctrl, &adapter->tx_eq);
+
+ return IRQ_HANDLED;
+}
+
+static inline bool do_lro(struct be_adapter *adapter,
+ struct be_eth_rx_compl *rxcp)
+{
+ int err = AMAP_GET_BITS(struct amap_eth_rx_compl, err, rxcp);
+ int tcp_frame = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
+
+ if (err)
+ drvr_stats(adapter)->be_rxcp_err++;
+
+ return (!tcp_frame || err || (adapter->max_rx_coal <= 1)) ?
+ false : true;
+}
+
+int be_poll_rx(struct napi_struct *napi, int budget)
+{
+ struct be_eq_obj *rx_eq = container_of(napi, struct be_eq_obj, napi);
+ struct be_adapter *adapter =
+ container_of(rx_eq, struct be_adapter, rx_eq);
+ struct be_queue_info *rx_cq = &adapter->rx_obj.cq;
+ struct be_eth_rx_compl *rxcp;
+ u32 work_done;
+
+ for (work_done = 0; work_done < budget; work_done++) {
+ rxcp = be_rx_compl_get(adapter);
+ if (!rxcp)
+ break;
+
+ if (do_lro(adapter, rxcp))
+ be_rx_compl_process_lro(adapter, rxcp);
+ else
+ be_rx_compl_process(adapter, rxcp);
+ }
+
+ lro_flush_all(&adapter->rx_obj.lro_mgr);
+
+ /* Refill the queue */
+ if (atomic_read(&adapter->rx_obj.q.used) < RX_FRAGS_REFILL_WM)
+ be_post_rx_frags(adapter);
+
+ /* All consumed */
+ if (work_done < budget) {
+ napi_complete(napi);
+ be_cq_notify(&adapter->ctrl, rx_cq->id, true, work_done);
+ } else {
+ /* More to be consumed; continue with interrupts disabled */
+ be_cq_notify(&adapter->ctrl, rx_cq->id, false, work_done);
+ }
+ return work_done;
+}
+
+/* For TX we don't honour budget; consume everything */
+int be_poll_tx(struct napi_struct *napi, int budget)
+{
+ struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
+ struct be_adapter *adapter =
+ container_of(tx_eq, struct be_adapter, tx_eq);
+ struct be_tx_obj *tx_obj = &adapter->tx_obj;
+ struct be_queue_info *tx_cq = &tx_obj->cq;
+ struct be_queue_info *txq = &tx_obj->q;
+ struct be_eth_tx_compl *txcp;
+ u32 num_cmpl = 0;
+ u16 end_idx;
+
+ while ((txcp = be_tx_compl_get(adapter))) {
+ end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
+ wrb_index, txcp);
+ be_tx_compl_process(adapter, end_idx);
+ num_cmpl++;
+ }
+
+ /* As Tx wrbs have been freed up, wake up netdev queue if
+ * it was stopped due to lack of tx wrbs.
+ */
+ if (netif_queue_stopped(adapter->netdev) &&
+ atomic_read(&txq->used) < txq->len / 2) {
+ netif_wake_queue(adapter->netdev);
+ }
+
+ napi_complete(napi);
+
+ be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+
+ drvr_stats(adapter)->be_tx_events++;
+ drvr_stats(adapter)->be_tx_compl += num_cmpl;
+
+ return 1;
+}
+
+static void be_worker(struct work_struct *work)
+{
+ struct be_adapter *adapter =
+ container_of(work, struct be_adapter, work.work);
+ int status;
+
+ /* Check link */
+ be_link_status_update(adapter);
+
+ /* Get Stats */
+ status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
+ if (!status)
+ netdev_stats_update(adapter);
+
+ /* Set EQ delay */
+ be_rx_eqd_update(adapter);
+
+ if (adapter->rx_post_starved) {
+ adapter->rx_post_starved = false;
+ be_post_rx_frags(adapter);
+ }
+
+ schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
+}
+
+static void be_msix_enable(struct be_adapter *adapter)
+{
+ int i, status;
+
+ for (i = 0; i < BE_NUM_MSIX_VECTORS; i++)
+ adapter->msix_entries[i].entry = i;
+
+ status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+ BE_NUM_MSIX_VECTORS);
+ if (status == 0)
+ adapter->msix_enabled = true;
+ return;
+}
+
+static inline int be_msix_vec_get(struct be_adapter *adapter, u32 eq_id)
+{
+ return adapter->msix_entries[eq_id -
+ 8 * adapter->ctrl.pci_func].vector;
+}
+
+static int be_msix_register(struct be_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct be_eq_obj *tx_eq = &adapter->tx_eq;
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ int status, vec;
+
+ sprintf(tx_eq->desc, "%s-tx", netdev->name);
+ vec = be_msix_vec_get(adapter, tx_eq->q.id);
+ status = request_irq(vec, be_msix_tx, 0, tx_eq->desc, adapter);
+ if (status)
+ goto err;
+
+ sprintf(rx_eq->desc, "%s-rx", netdev->name);
+ vec = be_msix_vec_get(adapter, rx_eq->q.id);
+ status = request_irq(vec, be_msix_rx, 0, rx_eq->desc, adapter);
+ if (status) { /* Free TX IRQ */
+ vec = be_msix_vec_get(adapter, tx_eq->q.id);
+ free_irq(vec, adapter);
+ goto err;
+ }
+ return 0;
+err:
+ dev_warn(&adapter->pdev->dev,
+ "MSIX Request IRQ failed - err %d\n", status);
+ pci_disable_msix(adapter->pdev);
+ adapter->msix_enabled = false;
+ return status;
+}
+
+static int be_irq_register(struct be_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int status;
+
+ if (adapter->msix_enabled) {
+ status = be_msix_register(adapter);
+ if (status == 0)
+ goto done;
+ }
+
+ /* INTx */
+ netdev->irq = adapter->pdev->irq;
+ status = request_irq(netdev->irq, be_intx, IRQF_SHARED, netdev->name,
+ adapter);
+ if (status) {
+ dev_err(&adapter->pdev->dev,
+ "INTx request IRQ failed - err %d\n", status);
+ return status;
+ }
+done:
+ adapter->isr_registered = true;
+ return 0;
+}
+
+static void be_irq_unregister(struct be_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int vec;
+
+ if (!adapter->isr_registered)
+ return;
+
+ /* INTx */
+ if (!adapter->msix_enabled) {
+ free_irq(netdev->irq, adapter);
+ goto done;
+ }
+
+ /* MSIx */
+ vec = be_msix_vec_get(adapter, adapter->tx_eq.q.id);
+ free_irq(vec, adapter);
+ vec = be_msix_vec_get(adapter, adapter->rx_eq.q.id);
+ free_irq(vec, adapter);
+done:
+ adapter->isr_registered = false;
+ return;
+}
+
+static int be_open(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ struct be_eq_obj *tx_eq = &adapter->tx_eq;
+ u32 if_flags;
+ int status;
+
+ if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS |
+ BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED |
+ BE_IF_FLAGS_PASS_L3L4_ERRORS;
+ status = be_cmd_if_create(ctrl, if_flags, netdev->dev_addr,
+ false/* pmac_invalid */, &adapter->if_handle,
+ &adapter->pmac_id);
+ if (status != 0)
+ goto do_none;
+
+ be_vid_config(netdev);
+
+ status = be_cmd_set_flow_control(ctrl, true, true);
+ if (status != 0)
+ goto if_destroy;
+
+ status = be_tx_queues_create(adapter);
+ if (status != 0)
+ goto if_destroy;
+
+ status = be_rx_queues_create(adapter);
+ if (status != 0)
+ goto tx_qs_destroy;
+
+ /* First time posting */
+ be_post_rx_frags(adapter);
+
+ napi_enable(&rx_eq->napi);
+ napi_enable(&tx_eq->napi);
+
+ be_irq_register(adapter);
+
+ be_intr_set(ctrl, true);
+
+ /* The evt queues are created in the unarmed state; arm them */
+ be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+ be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+
+ /* The compl queues are created in the unarmed state; arm them */
+ be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
+ be_cq_notify(ctrl, adapter->tx_obj.cq.id, true, 0);
+
+ be_link_status_update(adapter);
+
+ schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
+ return 0;
+
+tx_qs_destroy:
+ be_tx_queues_destroy(adapter);
+if_destroy:
+ be_cmd_if_destroy(ctrl, adapter->if_handle);
+do_none:
+ return status;
+}
+
+static int be_close(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ struct be_eq_obj *rx_eq = &adapter->rx_eq;
+ struct be_eq_obj *tx_eq = &adapter->tx_eq;
+ int vec;
+
+ cancel_delayed_work(&adapter->work);
+
+ netif_stop_queue(netdev);
+ netif_carrier_off(netdev);
+ adapter->link.speed = PHY_LINK_SPEED_ZERO;
+
+ be_intr_set(ctrl, false);
+
+ if (adapter->msix_enabled) {
+ vec = be_msix_vec_get(adapter, tx_eq->q.id);
+ synchronize_irq(vec);
+ vec = be_msix_vec_get(adapter, rx_eq->q.id);
+ synchronize_irq(vec);
+ } else {
+ synchronize_irq(netdev->irq);
+ }
+ be_irq_unregister(adapter);
+
+ napi_disable(&rx_eq->napi);
+ napi_disable(&tx_eq->napi);
+
+ be_rx_queues_destroy(adapter);
+ be_tx_queues_destroy(adapter);
+
+ be_cmd_if_destroy(ctrl, adapter->if_handle);
+ return 0;
+}
+
+static int be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
+ void **ip_hdr, void **tcpudp_hdr,
+ u64 *hdr_flags, void *priv)
+{
+ struct ethhdr *eh;
+ struct vlan_ethhdr *veh;
+ struct iphdr *iph;
+ u8 *va = page_address(frag->page) + frag->page_offset;
+ unsigned long ll_hlen;
+
+ prefetch(va);
+ eh = (struct ethhdr *)va;
+ *mac_hdr = eh;
+ ll_hlen = ETH_HLEN;
+ if (eh->h_proto != htons(ETH_P_IP)) {
+ if (eh->h_proto == htons(ETH_P_8021Q)) {
+ veh = (struct vlan_ethhdr *)va;
+ if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
+ return -1;
+
+ ll_hlen += VLAN_HLEN;
+ } else {
+ return -1;
+ }
+ }
+ *hdr_flags = LRO_IPV4;
+ iph = (struct iphdr *)(va + ll_hlen);
+ *ip_hdr = iph;
+ if (iph->protocol != IPPROTO_TCP)
+ return -1;
+ *hdr_flags |= LRO_TCP;
+ *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
+
+ return 0;
+}
+
+static void be_lro_init(struct be_adapter *adapter, struct net_device *netdev)
+{
+ struct net_lro_mgr *lro_mgr;
+
+ lro_mgr = &adapter->rx_obj.lro_mgr;
+ lro_mgr->dev = netdev;
+ lro_mgr->features = LRO_F_NAPI;
+ lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
+ lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
+ lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
+ lro_mgr->lro_arr = adapter->rx_obj.lro_desc;
+ lro_mgr->get_frag_header = be_get_frag_header;
+ lro_mgr->max_aggr = BE_MAX_FRAGS_PER_FRAME;
+}
+
+static struct net_device_ops be_netdev_ops = {
+ .ndo_open = be_open,
+ .ndo_stop = be_close,
+ .ndo_start_xmit = be_xmit,
+ .ndo_get_stats = be_get_stats,
+ .ndo_set_rx_mode = be_set_multicast_list,
+ .ndo_set_mac_address = be_mac_addr_set,
+ .ndo_change_mtu = be_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_vlan_rx_register = be_vlan_register,
+ .ndo_vlan_rx_add_vid = be_vlan_add_vid,
+ .ndo_vlan_rx_kill_vid = be_vlan_rem_vid,
+};
+
+static void be_netdev_init(struct net_device *netdev)
+{
+ struct be_adapter *adapter = netdev_priv(netdev);
+
+ netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+ netdev->flags |= IFF_MULTICAST;
+
+ BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
+
+ SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
+
+ be_lro_init(adapter, netdev);
+
+ netif_napi_add(netdev, &adapter->rx_eq.napi, be_poll_rx,
+ BE_NAPI_WEIGHT);
+ netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx,
+ BE_NAPI_WEIGHT);
+
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+}
+
+static void be_unmap_pci_bars(struct be_adapter *adapter)
+{
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ if (ctrl->csr)
+ iounmap(ctrl->csr);
+ if (ctrl->db)
+ iounmap(ctrl->db);
+ if (ctrl->pcicfg)
+ iounmap(ctrl->pcicfg);
+}
+
+static int be_map_pci_bars(struct be_adapter *adapter)
+{
+ u8 __iomem *addr;
+
+ addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
+ pci_resource_len(adapter->pdev, 2));
+ if (addr == NULL)
+ return -ENOMEM;
+ adapter->ctrl.csr = addr;
+
+ addr = ioremap_nocache(pci_resource_start(adapter->pdev, 4),
+ 128 * 1024);
+ if (addr == NULL)
+ goto pci_map_err;
+ adapter->ctrl.db = addr;
+
+ addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
+ pci_resource_len(adapter->pdev, 1));
+ if (addr == NULL)
+ goto pci_map_err;
+ adapter->ctrl.pcicfg = addr;
+
+ return 0;
+pci_map_err:
+ be_unmap_pci_bars(adapter);
+ return -ENOMEM;
+}
+
+
+static void be_ctrl_cleanup(struct be_adapter *adapter)
+{
+ struct be_dma_mem *mem = &adapter->ctrl.mbox_mem_alloced;
+
+ be_unmap_pci_bars(adapter);
+
+ if (mem->va)
+ pci_free_consistent(adapter->pdev, mem->size,
+ mem->va, mem->dma);
+}
+
+/* Initialize the mbox required to send cmds to BE */
+static int be_ctrl_init(struct be_adapter *adapter)
+{
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ struct be_dma_mem *mbox_mem_alloc = &ctrl->mbox_mem_alloced;
+ struct be_dma_mem *mbox_mem_align = &ctrl->mbox_mem;
+ int status;
+ u32 val;
+
+ status = be_map_pci_bars(adapter);
+ if (status)
+ return status;
+
+ mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
+ mbox_mem_alloc->va = pci_alloc_consistent(adapter->pdev,
+ mbox_mem_alloc->size, &mbox_mem_alloc->dma);
+ if (!mbox_mem_alloc->va) {
+ be_unmap_pci_bars(adapter);
+ return -1;
+ }
+ mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
+ mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
+ mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
+ memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
+ spin_lock_init(&ctrl->cmd_lock);
+
+ val = ioread32(ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
+ ctrl->pci_func = (val >> MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT) &
+ MEMBAR_CTRL_INT_CTRL_PFUNC_MASK;
+ return 0;
+}
+
+static void be_stats_cleanup(struct be_adapter *adapter)
+{
+ struct be_stats_obj *stats = &adapter->stats;
+ struct be_dma_mem *cmd = &stats->cmd;
+
+ if (cmd->va)
+ pci_free_consistent(adapter->pdev, cmd->size,
+ cmd->va, cmd->dma);
+}
+
+static int be_stats_init(struct be_adapter *adapter)
+{
+ struct be_stats_obj *stats = &adapter->stats;
+ struct be_dma_mem *cmd = &stats->cmd;
+
+ cmd->size = sizeof(struct be_cmd_req_get_stats);
+ cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
+ if (cmd->va == NULL)
+ return -1;
+ return 0;
+}
+
+static void __devexit be_remove(struct pci_dev *pdev)
+{
+ struct be_adapter *adapter = pci_get_drvdata(pdev);
+ if (!adapter)
+ return;
+
+ unregister_netdev(adapter->netdev);
+
+ be_stats_cleanup(adapter);
+
+ be_ctrl_cleanup(adapter);
+
+ if (adapter->msix_enabled) {
+ pci_disable_msix(adapter->pdev);
+ adapter->msix_enabled = false;
+ }
+
+ pci_set_drvdata(pdev, NULL);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ free_netdev(adapter->netdev);
+}
+
+static int be_hw_up(struct be_adapter *adapter)
+{
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ int status;
+
+ status = be_cmd_POST(ctrl);
+ if (status)
+ return status;
+
+ status = be_cmd_get_fw_ver(ctrl, adapter->fw_ver);
+ if (status)
+ return status;
+
+ status = be_cmd_query_fw_cfg(ctrl, &adapter->port_num);
+ return status;
+}
+
+static int __devinit be_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pdev_id)
+{
+ int status = 0;
+ struct be_adapter *adapter;
+ struct net_device *netdev;
+ struct be_ctrl_info *ctrl;
+ u8 mac[ETH_ALEN];
+
+ status = pci_enable_device(pdev);
+ if (status)
+ goto do_none;
+
+ status = pci_request_regions(pdev, DRV_NAME);
+ if (status)
+ goto disable_dev;
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev(sizeof(struct be_adapter));
+ if (netdev == NULL) {
+ status = -ENOMEM;
+ goto rel_reg;
+ }
+ adapter = netdev_priv(netdev);
+ adapter->pdev = pdev;
+ pci_set_drvdata(pdev, adapter);
+ adapter->netdev = netdev;
+
+ be_msix_enable(adapter);
+
+ status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ if (!status) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ } else {
+ status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (status) {
+ dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
+ goto free_netdev;
+ }
+ }
+
+ ctrl = &adapter->ctrl;
+ status = be_ctrl_init(adapter);
+ if (status)
+ goto free_netdev;
+
+ status = be_stats_init(adapter);
+ if (status)
+ goto ctrl_clean;
+
+ status = be_hw_up(adapter);
+ if (status)
+ goto stats_clean;
+
+ status = be_cmd_mac_addr_query(ctrl, mac, MAC_ADDRESS_TYPE_NETWORK,
+ true /* permanent */, 0);
+ if (status)
+ goto stats_clean;
+ memcpy(netdev->dev_addr, mac, ETH_ALEN);
+
+ INIT_DELAYED_WORK(&adapter->work, be_worker);
+ be_netdev_init(netdev);
+ SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
+
+ status = register_netdev(netdev);
+ if (status != 0)
+ goto stats_clean;
+
+ dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+ return 0;
+
+stats_clean:
+ be_stats_cleanup(adapter);
+ctrl_clean:
+ be_ctrl_cleanup(adapter);
+free_netdev:
+ free_netdev(adapter->netdev);
+rel_reg:
+ pci_release_regions(pdev);
+disable_dev:
+ pci_disable_device(pdev);
+do_none:
+ dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+ return status;
+}
+
+static int be_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct be_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+ if (netif_running(netdev)) {
+ rtnl_lock();
+ be_close(netdev);
+ rtnl_unlock();
+ }
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int be_resume(struct pci_dev *pdev)
+{
+ int status = 0;
+ struct be_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+
+ status = pci_enable_device(pdev);
+ if (status)
+ return status;
+
+ pci_set_power_state(pdev, 0);
+ pci_restore_state(pdev);
+
+ if (netif_running(netdev)) {
+ rtnl_lock();
+ be_open(netdev);
+ rtnl_unlock();
+ }
+ netif_device_attach(netdev);
+ return 0;
+}
+
+static struct pci_driver be_driver = {
+ .name = DRV_NAME,
+ .id_table = be_dev_ids,
+ .probe = be_probe,
+ .remove = be_remove,
+ .suspend = be_suspend,
+ .resume = be_resume
+};
+
+static int __init be_init_module(void)
+{
+ if (rx_frag_size != 8192 && rx_frag_size != 4096
+ && rx_frag_size != 2048) {
+ printk(KERN_WARNING DRV_NAME
+ " : Module param rx_frag_size must be 2048/4096/8192."
+ " Using 2048\n");
+ rx_frag_size = 2048;
+ }
+ /* Ensure rx_frag_size is aligned to chache line */
+ if (SKB_DATA_ALIGN(rx_frag_size) != rx_frag_size) {
+ printk(KERN_WARNING DRV_NAME
+ " : Bad module param rx_frag_size. Using 2048\n");
+ rx_frag_size = 2048;
+ }
+
+ return pci_register_driver(&be_driver);
+}
+module_init(be_init_module);
+
+static void __exit be_exit_module(void)
+{
+ pci_unregister_driver(&be_driver);
+}
+module_exit(be_exit_module);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 6500b7c..6b6530f 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -57,8 +57,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.9.2"
-#define DRV_MODULE_RELDATE "Feb 11, 2009"
+#define DRV_MODULE_VERSION "1.9.3"
+#define DRV_MODULE_RELDATE "March 17, 2009"
#define RUN_AT(x) (jiffies + (x))
@@ -5843,9 +5843,6 @@
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
msix_ent[i].entry = i;
msix_ent[i].vector = 0;
-
- snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
- bp->irq_tbl[i].handler = bnx2_msi_1shot;
}
rc = pci_enable_msix(bp->pdev, msix_ent, BNX2_MAX_MSIX_VEC);
@@ -5854,8 +5851,11 @@
bp->irq_nvecs = msix_vecs;
bp->flags |= BNX2_FLAG_USING_MSIX | BNX2_FLAG_ONE_SHOT_MSI;
- for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
+ for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
bp->irq_tbl[i].vector = msix_ent[i].vector;
+ snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
+ bp->irq_tbl[i].handler = bnx2_msi_1shot;
+ }
}
static void
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 15a5cf0..3cf2b92 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -152,7 +152,7 @@
#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
#define SGE_PAGE_SIZE PAGE_SIZE
#define SGE_PAGE_SHIFT PAGE_SHIFT
-#define SGE_PAGE_ALIGN(addr) PAGE_ALIGN(addr)
+#define SGE_PAGE_ALIGN(addr) PAGE_ALIGN((typeof(PAGE_SIZE))addr)
#define BCM_RX_ETH_PAYLOAD_ALIGN 64
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index a6c0b3a..3b0c249 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -150,7 +150,6 @@
static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len)
{
-#ifdef USE_DMAE
int offset = 0;
if (bp->dmae_ready) {
@@ -164,9 +163,6 @@
addr + offset, len);
} else
bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-#else
- bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len);
-#endif
}
static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len)
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index d3e7775..2e346a5 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -57,7 +57,7 @@
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.45.26"
+#define DRV_MODULE_VERSION "1.45.27"
#define DRV_MODULE_RELDATE "2009/01/26"
#define BNX2X_BC_VER 0x040200
@@ -4035,10 +4035,10 @@
{
int port = BP_PORT(bp);
- bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+ bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
sizeof(struct ustorm_status_block)/4);
- bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+ bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
sizeof(struct cstorm_status_block)/4);
}
@@ -4092,18 +4092,18 @@
{
int func = BP_FUNC(bp);
- bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
- USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
- sizeof(struct ustorm_def_status_block)/4);
- bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
- CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
- sizeof(struct cstorm_def_status_block)/4);
- bnx2x_init_fill(bp, BAR_XSTRORM_INTMEM +
- XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
- sizeof(struct xstorm_def_status_block)/4);
- bnx2x_init_fill(bp, BAR_TSTRORM_INTMEM +
+ bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR +
TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct tstorm_def_status_block)/4);
+ bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
+ USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+ sizeof(struct ustorm_def_status_block)/4);
+ bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
+ CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+ sizeof(struct cstorm_def_status_block)/4);
+ bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR +
+ XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+ sizeof(struct xstorm_def_status_block)/4);
}
static void bnx2x_init_def_sb(struct bnx2x *bp,
@@ -4518,7 +4518,8 @@
(USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_TPA |
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_SGE_RING);
context->ustorm_st_context.common.sge_buff_size =
- (u16)(BCM_PAGE_SIZE*PAGES_PER_SGE);
+ (u16)min((u32)SGE_PAGE_SIZE*PAGES_PER_SGE,
+ (u32)0xffff);
context->ustorm_st_context.common.sge_page_base_hi =
U64_HI(fp->rx_sge_mapping);
context->ustorm_st_context.common.sge_page_base_lo =
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9fb3883..3d76686 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3537,11 +3537,26 @@
}
break;
case NETDEV_CHANGE:
- /*
- * TODO: is this what we get if somebody
- * sets up a hierarchical bond, then rmmod's
- * one of the slave bonding devices?
- */
+ if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) {
+ struct slave *slave;
+
+ slave = bond_get_slave_by_dev(bond, slave_dev);
+ if (slave) {
+ u16 old_speed = slave->speed;
+ u16 old_duplex = slave->duplex;
+
+ bond_update_speed_duplex(slave);
+
+ if (bond_is_lb(bond))
+ break;
+
+ if (old_speed != slave->speed)
+ bond_3ad_adapter_speed_changed(slave);
+ if (old_duplex != slave->duplex)
+ bond_3ad_adapter_duplex_changed(slave);
+ }
+ }
+
break;
case NETDEV_DOWN:
/*
@@ -4113,7 +4128,7 @@
const struct net_device_ops *slave_ops
= slave->dev->netdev_ops;
if (slave_ops->ndo_neigh_setup)
- return slave_ops->ndo_neigh_setup(dev, parms);
+ return slave_ops->ndo_neigh_setup(slave->dev, parms);
}
return 0;
}
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index bcf9291..254ec62 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -930,13 +930,15 @@
struct net_device *dev = dev_id;
board_info_t *db = netdev_priv(dev);
int int_status;
+ unsigned long flags;
u8 reg_save;
dm9000_dbg(db, 3, "entering %s\n", __func__);
/* A real interrupt coming */
- spin_lock(&db->lock);
+ /* holders of db->lock must always block IRQs */
+ spin_lock_irqsave(&db->lock, flags);
/* Save previous register address */
reg_save = readb(db->io_addr);
@@ -972,7 +974,7 @@
/* Restore previous register address */
writeb(reg_save, db->io_addr);
- spin_unlock(&db->lock);
+ spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
diff --git a/drivers/net/dnet.c b/drivers/net/dnet.c
new file mode 100644
index 0000000..1b40632
--- /dev/null
+++ b/drivers/net/dnet.c
@@ -0,0 +1,994 @@
+/*
+ * Dave DNET Ethernet Controller driver
+ *
+ * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+ * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#include "dnet.h"
+
+#undef DEBUG
+
+/* function for reading internal MAC register */
+u16 dnet_readw_mac(struct dnet *bp, u16 reg)
+{
+ u16 data_read;
+
+ /* issue a read */
+ dnet_writel(bp, reg, MACREG_ADDR);
+
+ /* since a read/write op to the MAC is very slow,
+ * we must wait before reading the data */
+ ndelay(500);
+
+ /* read data read from the MAC register */
+ data_read = dnet_readl(bp, MACREG_DATA);
+
+ /* all done */
+ return data_read;
+}
+
+/* function for writing internal MAC register */
+void dnet_writew_mac(struct dnet *bp, u16 reg, u16 val)
+{
+ /* load data to write */
+ dnet_writel(bp, val, MACREG_DATA);
+
+ /* issue a write */
+ dnet_writel(bp, reg | DNET_INTERNAL_WRITE, MACREG_ADDR);
+
+ /* since a read/write op to the MAC is very slow,
+ * we must wait before exiting */
+ ndelay(500);
+}
+
+static void __dnet_set_hwaddr(struct dnet *bp)
+{
+ u16 tmp;
+
+ tmp = cpu_to_be16(*((u16 *) bp->dev->dev_addr));
+ dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_0_REG, tmp);
+ tmp = cpu_to_be16(*((u16 *) (bp->dev->dev_addr + 2)));
+ dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_1_REG, tmp);
+ tmp = cpu_to_be16(*((u16 *) (bp->dev->dev_addr + 4)));
+ dnet_writew_mac(bp, DNET_INTERNAL_MAC_ADDR_2_REG, tmp);
+}
+
+static void __devinit dnet_get_hwaddr(struct dnet *bp)
+{
+ u16 tmp;
+ u8 addr[6];
+
+ /*
+ * from MAC docs:
+ * "Note that the MAC address is stored in the registers in Hexadecimal
+ * form. For example, to set the MAC Address to: AC-DE-48-00-00-80
+ * would require writing 0xAC (octet 0) to address 0x0B (high byte of
+ * Mac_addr[15:0]), 0xDE (octet 1) to address 0x0A (Low byte of
+ * Mac_addr[15:0]), 0x48 (octet 2) to address 0x0D (high byte of
+ * Mac_addr[15:0]), 0x00 (octet 3) to address 0x0C (Low byte of
+ * Mac_addr[15:0]), 0x00 (octet 4) to address 0x0F (high byte of
+ * Mac_addr[15:0]), and 0x80 (octet 5) to address * 0x0E (Low byte of
+ * Mac_addr[15:0]).
+ */
+ tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_0_REG);
+ *((u16 *) addr) = be16_to_cpu(tmp);
+ tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_1_REG);
+ *((u16 *) (addr + 2)) = be16_to_cpu(tmp);
+ tmp = dnet_readw_mac(bp, DNET_INTERNAL_MAC_ADDR_2_REG);
+ *((u16 *) (addr + 4)) = be16_to_cpu(tmp);
+
+ if (is_valid_ether_addr(addr))
+ memcpy(bp->dev->dev_addr, addr, sizeof(addr));
+}
+
+static int dnet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct dnet *bp = bus->priv;
+ u16 value;
+
+ while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+ & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+ cpu_relax();
+
+ /* only 5 bits allowed for phy-addr and reg_offset */
+ mii_id &= 0x1f;
+ regnum &= 0x1f;
+
+ /* prepare reg_value for a read */
+ value = (mii_id << 8);
+ value |= regnum;
+
+ /* write control word */
+ dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG, value);
+
+ /* wait for end of transfer */
+ while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+ & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+ cpu_relax();
+
+ value = dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_DAT_REG);
+
+ pr_debug("mdio_read %02x:%02x <- %04x\n", mii_id, regnum, value);
+
+ return value;
+}
+
+static int dnet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct dnet *bp = bus->priv;
+ u16 tmp;
+
+ pr_debug("mdio_write %02x:%02x <- %04x\n", mii_id, regnum, value);
+
+ while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+ & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+ cpu_relax();
+
+ /* prepare for a write operation */
+ tmp = (1 << 13);
+
+ /* only 5 bits allowed for phy-addr and reg_offset */
+ mii_id &= 0x1f;
+ regnum &= 0x1f;
+
+ /* only 16 bits on data */
+ value &= 0xffff;
+
+ /* prepare reg_value for a write */
+ tmp |= (mii_id << 8);
+ tmp |= regnum;
+
+ /* write data to write first */
+ dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_DAT_REG, value);
+
+ /* write control word */
+ dnet_writew_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG, tmp);
+
+ while (!(dnet_readw_mac(bp, DNET_INTERNAL_GMII_MNG_CTL_REG)
+ & DNET_INTERNAL_GMII_MNG_CMD_FIN))
+ cpu_relax();
+
+ return 0;
+}
+
+static int dnet_mdio_reset(struct mii_bus *bus)
+{
+ return 0;
+}
+
+static void dnet_handle_link_change(struct net_device *dev)
+{
+ struct dnet *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phy_dev;
+ unsigned long flags;
+ u32 mode_reg, ctl_reg;
+
+ int status_change = 0;
+
+ spin_lock_irqsave(&bp->lock, flags);
+
+ mode_reg = dnet_readw_mac(bp, DNET_INTERNAL_MODE_REG);
+ ctl_reg = dnet_readw_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG);
+
+ if (phydev->link) {
+ if (bp->duplex != phydev->duplex) {
+ if (phydev->duplex)
+ ctl_reg &=
+ ~(DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP);
+ else
+ ctl_reg |=
+ DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP;
+
+ bp->duplex = phydev->duplex;
+ status_change = 1;
+ }
+
+ if (bp->speed != phydev->speed) {
+ status_change = 1;
+ switch (phydev->speed) {
+ case 1000:
+ mode_reg |= DNET_INTERNAL_MODE_GBITEN;
+ break;
+ case 100:
+ case 10:
+ mode_reg &= ~DNET_INTERNAL_MODE_GBITEN;
+ break;
+ default:
+ printk(KERN_WARNING
+ "%s: Ack! Speed (%d) is not "
+ "10/100/1000!\n", dev->name,
+ phydev->speed);
+ break;
+ }
+ bp->speed = phydev->speed;
+ }
+ }
+
+ if (phydev->link != bp->link) {
+ if (phydev->link) {
+ mode_reg |=
+ (DNET_INTERNAL_MODE_RXEN | DNET_INTERNAL_MODE_TXEN);
+ } else {
+ mode_reg &=
+ ~(DNET_INTERNAL_MODE_RXEN |
+ DNET_INTERNAL_MODE_TXEN);
+ bp->speed = 0;
+ bp->duplex = -1;
+ }
+ bp->link = phydev->link;
+
+ status_change = 1;
+ }
+
+ if (status_change) {
+ dnet_writew_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG, ctl_reg);
+ dnet_writew_mac(bp, DNET_INTERNAL_MODE_REG, mode_reg);
+ }
+
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ if (status_change) {
+ if (phydev->link)
+ printk(KERN_INFO "%s: link up (%d/%s)\n",
+ dev->name, phydev->speed,
+ DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+ else
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ }
+}
+
+static int dnet_mii_probe(struct net_device *dev)
+{
+ struct dnet *bp = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+
+ /* find the first phy */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ if (bp->mii_bus->phy_map[phy_addr]) {
+ phydev = bp->mii_bus->phy_map[phy_addr];
+ break;
+ }
+ }
+
+ if (!phydev) {
+ printk(KERN_ERR "%s: no PHY found\n", dev->name);
+ return -ENODEV;
+ }
+
+ /* TODO : add pin_irq */
+
+ /* attach the mac to the phy */
+ if (bp->capabilities & DNET_HAS_RMII) {
+ phydev = phy_connect(dev, dev_name(&phydev->dev),
+ &dnet_handle_link_change, 0,
+ PHY_INTERFACE_MODE_RMII);
+ } else {
+ phydev = phy_connect(dev, dev_name(&phydev->dev),
+ &dnet_handle_link_change, 0,
+ PHY_INTERFACE_MODE_MII);
+ }
+
+ if (IS_ERR(phydev)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+
+ /* mask with MAC supported features */
+ if (bp->capabilities & DNET_HAS_GIGABIT)
+ phydev->supported &= PHY_GBIT_FEATURES;
+ else
+ phydev->supported &= PHY_BASIC_FEATURES;
+
+ phydev->supported |= SUPPORTED_Asym_Pause | SUPPORTED_Pause;
+
+ phydev->advertising = phydev->supported;
+
+ bp->link = 0;
+ bp->speed = 0;
+ bp->duplex = -1;
+ bp->phy_dev = phydev;
+
+ return 0;
+}
+
+static int dnet_mii_init(struct dnet *bp)
+{
+ int err, i;
+
+ bp->mii_bus = mdiobus_alloc();
+ if (bp->mii_bus == NULL)
+ return -ENOMEM;
+
+ bp->mii_bus->name = "dnet_mii_bus";
+ bp->mii_bus->read = &dnet_mdio_read;
+ bp->mii_bus->write = &dnet_mdio_write;
+ bp->mii_bus->reset = &dnet_mdio_reset;
+
+ snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+
+ bp->mii_bus->priv = bp;
+
+ bp->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!bp->mii_bus->irq) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bp->mii_bus->irq[i] = PHY_POLL;
+
+ platform_set_drvdata(bp->dev, bp->mii_bus);
+
+ if (mdiobus_register(bp->mii_bus)) {
+ err = -ENXIO;
+ goto err_out_free_mdio_irq;
+ }
+
+ if (dnet_mii_probe(bp->dev) != 0) {
+ err = -ENXIO;
+ goto err_out_unregister_bus;
+ }
+
+ return 0;
+
+err_out_unregister_bus:
+ mdiobus_unregister(bp->mii_bus);
+err_out_free_mdio_irq:
+ kfree(bp->mii_bus->irq);
+err_out:
+ mdiobus_free(bp->mii_bus);
+ return err;
+}
+
+/* For Neptune board: LINK1000 as Link LED and TX as activity LED */
+int dnet_phy_marvell_fixup(struct phy_device *phydev)
+{
+ return phy_write(phydev, 0x18, 0x4148);
+}
+
+static void dnet_update_stats(struct dnet *bp)
+{
+ u32 __iomem *reg = bp->regs + DNET_RX_PKT_IGNR_CNT;
+ u32 *p = &bp->hw_stats.rx_pkt_ignr;
+ u32 *end = &bp->hw_stats.rx_byte + 1;
+
+ WARN_ON((unsigned long)(end - p - 1) !=
+ (DNET_RX_BYTE_CNT - DNET_RX_PKT_IGNR_CNT) / 4);
+
+ for (; p < end; p++, reg++)
+ *p += readl(reg);
+
+ reg = bp->regs + DNET_TX_UNICAST_CNT;
+ p = &bp->hw_stats.tx_unicast;
+ end = &bp->hw_stats.tx_byte + 1;
+
+ WARN_ON((unsigned long)(end - p - 1) !=
+ (DNET_TX_BYTE_CNT - DNET_TX_UNICAST_CNT) / 4);
+
+ for (; p < end; p++, reg++)
+ *p += readl(reg);
+}
+
+static int dnet_poll(struct napi_struct *napi, int budget)
+{
+ struct dnet *bp = container_of(napi, struct dnet, napi);
+ struct net_device *dev = bp->dev;
+ int npackets = 0;
+ unsigned int pkt_len;
+ struct sk_buff *skb;
+ unsigned int *data_ptr;
+ u32 int_enable;
+ u32 cmd_word;
+ int i;
+
+ while (npackets < budget) {
+ /*
+ * break out of while loop if there are no more
+ * packets waiting
+ */
+ if (!(dnet_readl(bp, RX_FIFO_WCNT) >> 16)) {
+ napi_complete(napi);
+ int_enable = dnet_readl(bp, INTR_ENB);
+ int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
+ dnet_writel(bp, int_enable, INTR_ENB);
+ return 0;
+ }
+
+ cmd_word = dnet_readl(bp, RX_LEN_FIFO);
+ pkt_len = cmd_word & 0xFFFF;
+
+ if (cmd_word & 0xDF180000)
+ printk(KERN_ERR "%s packet receive error %x\n",
+ __func__, cmd_word);
+
+ skb = dev_alloc_skb(pkt_len + 5);
+ if (skb != NULL) {
+ /* Align IP on 16 byte boundaries */
+ skb_reserve(skb, 2);
+ /*
+ * 'skb_put()' points to the start of sk_buff
+ * data area.
+ */
+ data_ptr = (unsigned int *)skb_put(skb, pkt_len);
+ for (i = 0; i < (pkt_len + 3) >> 2; i++)
+ *data_ptr++ = dnet_readl(bp, RX_DATA_FIFO);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_receive_skb(skb);
+ npackets++;
+ } else
+ printk(KERN_NOTICE
+ "%s: No memory to allocate a sk_buff of "
+ "size %u.\n", dev->name, pkt_len);
+ }
+
+ budget -= npackets;
+
+ if (npackets < budget) {
+ /* We processed all packets available. Tell NAPI it can
+ * stop polling then re-enable rx interrupts */
+ napi_complete(napi);
+ int_enable = dnet_readl(bp, INTR_ENB);
+ int_enable |= DNET_INTR_SRC_RX_CMDFIFOAF;
+ dnet_writel(bp, int_enable, INTR_ENB);
+ return 0;
+ }
+
+ /* There are still packets waiting */
+ return 1;
+}
+
+static irqreturn_t dnet_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct dnet *bp = netdev_priv(dev);
+ u32 int_src, int_enable, int_current;
+ unsigned long flags;
+ unsigned int handled = 0;
+
+ spin_lock_irqsave(&bp->lock, flags);
+
+ /* read and clear the DNET irq (clear on read) */
+ int_src = dnet_readl(bp, INTR_SRC);
+ int_enable = dnet_readl(bp, INTR_ENB);
+ int_current = int_src & int_enable;
+
+ /* restart the queue if we had stopped it for TX fifo almost full */
+ if (int_current & DNET_INTR_SRC_TX_FIFOAE) {
+ int_enable = dnet_readl(bp, INTR_ENB);
+ int_enable &= ~DNET_INTR_ENB_TX_FIFOAE;
+ dnet_writel(bp, int_enable, INTR_ENB);
+ netif_wake_queue(dev);
+ handled = 1;
+ }
+
+ /* RX FIFO error checking */
+ if (int_current &
+ (DNET_INTR_SRC_RX_CMDFIFOFF | DNET_INTR_SRC_RX_DATAFIFOFF)) {
+ printk(KERN_ERR "%s: RX fifo error %x, irq %x\n", __func__,
+ dnet_readl(bp, RX_STATUS), int_current);
+ /* we can only flush the RX FIFOs */
+ dnet_writel(bp, DNET_SYS_CTL_RXFIFOFLUSH, SYS_CTL);
+ ndelay(500);
+ dnet_writel(bp, 0, SYS_CTL);
+ handled = 1;
+ }
+
+ /* TX FIFO error checking */
+ if (int_current &
+ (DNET_INTR_SRC_TX_FIFOFULL | DNET_INTR_SRC_TX_DISCFRM)) {
+ printk(KERN_ERR "%s: TX fifo error %x, irq %x\n", __func__,
+ dnet_readl(bp, TX_STATUS), int_current);
+ /* we can only flush the TX FIFOs */
+ dnet_writel(bp, DNET_SYS_CTL_TXFIFOFLUSH, SYS_CTL);
+ ndelay(500);
+ dnet_writel(bp, 0, SYS_CTL);
+ handled = 1;
+ }
+
+ if (int_current & DNET_INTR_SRC_RX_CMDFIFOAF) {
+ if (napi_schedule_prep(&bp->napi)) {
+ /*
+ * There's no point taking any more interrupts
+ * until we have processed the buffers
+ */
+ /* Disable Rx interrupts and schedule NAPI poll */
+ int_enable = dnet_readl(bp, INTR_ENB);
+ int_enable &= ~DNET_INTR_SRC_RX_CMDFIFOAF;
+ dnet_writel(bp, int_enable, INTR_ENB);
+ __napi_schedule(&bp->napi);
+ }
+ handled = 1;
+ }
+
+ if (!handled)
+ pr_debug("%s: irq %x remains\n", __func__, int_current);
+
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef DEBUG
+static inline void dnet_print_skb(struct sk_buff *skb)
+{
+ int k;
+ printk(KERN_DEBUG PFX "data:");
+ for (k = 0; k < skb->len; k++)
+ printk(" %02x", (unsigned int)skb->data[k]);
+ printk("\n");
+}
+#else
+#define dnet_print_skb(skb) do {} while (0)
+#endif
+
+static int dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+
+ struct dnet *bp = netdev_priv(dev);
+ u32 tx_status, irq_enable;
+ unsigned int len, i, tx_cmd, wrsz;
+ unsigned long flags;
+ unsigned int *bufp;
+
+ tx_status = dnet_readl(bp, TX_STATUS);
+
+ pr_debug("start_xmit: len %u head %p data %p\n",
+ skb->len, skb->head, skb->data);
+ dnet_print_skb(skb);
+
+ /* frame size (words) */
+ len = (skb->len + 3) >> 2;
+
+ spin_lock_irqsave(&bp->lock, flags);
+
+ tx_status = dnet_readl(bp, TX_STATUS);
+
+ bufp = (unsigned int *)(((unsigned long) skb->data) & ~0x3UL);
+ wrsz = (u32) skb->len + 3;
+ wrsz += ((unsigned long) skb->data) & 0x3;
+ wrsz >>= 2;
+ tx_cmd = ((((unsigned long)(skb->data)) & 0x03) << 16) | (u32) skb->len;
+
+ /* check if there is enough room for the current frame */
+ if (wrsz < (DNET_FIFO_SIZE - dnet_readl(bp, TX_FIFO_WCNT))) {
+ for (i = 0; i < wrsz; i++)
+ dnet_writel(bp, *bufp++, TX_DATA_FIFO);
+
+ /*
+ * inform MAC that a packet's written and ready to be
+ * shipped out
+ */
+ dnet_writel(bp, tx_cmd, TX_LEN_FIFO);
+ }
+
+ if (dnet_readl(bp, TX_FIFO_WCNT) > DNET_FIFO_TX_DATA_AF_TH) {
+ netif_stop_queue(dev);
+ tx_status = dnet_readl(bp, INTR_SRC);
+ irq_enable = dnet_readl(bp, INTR_ENB);
+ irq_enable |= DNET_INTR_ENB_TX_FIFOAE;
+ dnet_writel(bp, irq_enable, INTR_ENB);
+ }
+
+ /* free the buffer */
+ dev_kfree_skb(skb);
+
+ spin_unlock_irqrestore(&bp->lock, flags);
+
+ dev->trans_start = jiffies;
+
+ return 0;
+}
+
+static void dnet_reset_hw(struct dnet *bp)
+{
+ /* put ts_mac in IDLE state i.e. disable rx/tx */
+ dnet_writew_mac(bp, DNET_INTERNAL_MODE_REG, DNET_INTERNAL_MODE_FCEN);
+
+ /*
+ * RX FIFO almost full threshold: only cmd FIFO almost full is
+ * implemented for RX side
+ */
+ dnet_writel(bp, DNET_FIFO_RX_CMD_AF_TH, RX_FIFO_TH);
+ /*
+ * TX FIFO almost empty threshold: only data FIFO almost empty
+ * is implemented for TX side
+ */
+ dnet_writel(bp, DNET_FIFO_TX_DATA_AE_TH, TX_FIFO_TH);
+
+ /* flush rx/tx fifos */
+ dnet_writel(bp, DNET_SYS_CTL_RXFIFOFLUSH | DNET_SYS_CTL_TXFIFOFLUSH,
+ SYS_CTL);
+ msleep(1);
+ dnet_writel(bp, 0, SYS_CTL);
+}
+
+static void dnet_init_hw(struct dnet *bp)
+{
+ u32 config;
+
+ dnet_reset_hw(bp);
+ __dnet_set_hwaddr(bp);
+
+ config = dnet_readw_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG);
+
+ if (bp->dev->flags & IFF_PROMISC)
+ /* Copy All Frames */
+ config |= DNET_INTERNAL_RXTX_CONTROL_ENPROMISC;
+ if (!(bp->dev->flags & IFF_BROADCAST))
+ /* No BroadCast */
+ config |= DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST;
+
+ config |= DNET_INTERNAL_RXTX_CONTROL_RXPAUSE |
+ DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST |
+ DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL |
+ DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS;
+
+ dnet_writew_mac(bp, DNET_INTERNAL_RXTX_CONTROL_REG, config);
+
+ /* clear irq before enabling them */
+ config = dnet_readl(bp, INTR_SRC);
+
+ /* enable RX/TX interrupt, recv packet ready interrupt */
+ dnet_writel(bp, DNET_INTR_ENB_GLOBAL_ENABLE | DNET_INTR_ENB_RX_SUMMARY |
+ DNET_INTR_ENB_TX_SUMMARY | DNET_INTR_ENB_RX_FIFOERR |
+ DNET_INTR_ENB_RX_ERROR | DNET_INTR_ENB_RX_FIFOFULL |
+ DNET_INTR_ENB_TX_FIFOFULL | DNET_INTR_ENB_TX_DISCFRM |
+ DNET_INTR_ENB_RX_PKTRDY, INTR_ENB);
+}
+
+static int dnet_open(struct net_device *dev)
+{
+ struct dnet *bp = netdev_priv(dev);
+
+ /* if the phy is not yet register, retry later */
+ if (!bp->phy_dev)
+ return -EAGAIN;
+
+ if (!is_valid_ether_addr(dev->dev_addr))
+ return -EADDRNOTAVAIL;
+
+ napi_enable(&bp->napi);
+ dnet_init_hw(bp);
+
+ phy_start_aneg(bp->phy_dev);
+
+ /* schedule a link state check */
+ phy_start(bp->phy_dev);
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int dnet_close(struct net_device *dev)
+{
+ struct dnet *bp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ napi_disable(&bp->napi);
+
+ if (bp->phy_dev)
+ phy_stop(bp->phy_dev);
+
+ dnet_reset_hw(bp);
+ netif_carrier_off(dev);
+
+ return 0;
+}
+
+static inline void dnet_print_pretty_hwstats(struct dnet_stats *hwstat)
+{
+ pr_debug("%s\n", __func__);
+ pr_debug("----------------------------- RX statistics "
+ "-------------------------------\n");
+ pr_debug("RX_PKT_IGNR_CNT %-8x\n", hwstat->rx_pkt_ignr);
+ pr_debug("RX_LEN_CHK_ERR_CNT %-8x\n", hwstat->rx_len_chk_err);
+ pr_debug("RX_LNG_FRM_CNT %-8x\n", hwstat->rx_lng_frm);
+ pr_debug("RX_SHRT_FRM_CNT %-8x\n", hwstat->rx_shrt_frm);
+ pr_debug("RX_IPG_VIOL_CNT %-8x\n", hwstat->rx_ipg_viol);
+ pr_debug("RX_CRC_ERR_CNT %-8x\n", hwstat->rx_crc_err);
+ pr_debug("RX_OK_PKT_CNT %-8x\n", hwstat->rx_ok_pkt);
+ pr_debug("RX_CTL_FRM_CNT %-8x\n", hwstat->rx_ctl_frm);
+ pr_debug("RX_PAUSE_FRM_CNT %-8x\n", hwstat->rx_pause_frm);
+ pr_debug("RX_MULTICAST_CNT %-8x\n", hwstat->rx_multicast);
+ pr_debug("RX_BROADCAST_CNT %-8x\n", hwstat->rx_broadcast);
+ pr_debug("RX_VLAN_TAG_CNT %-8x\n", hwstat->rx_vlan_tag);
+ pr_debug("RX_PRE_SHRINK_CNT %-8x\n", hwstat->rx_pre_shrink);
+ pr_debug("RX_DRIB_NIB_CNT %-8x\n", hwstat->rx_drib_nib);
+ pr_debug("RX_UNSUP_OPCD_CNT %-8x\n", hwstat->rx_unsup_opcd);
+ pr_debug("RX_BYTE_CNT %-8x\n", hwstat->rx_byte);
+ pr_debug("----------------------------- TX statistics "
+ "-------------------------------\n");
+ pr_debug("TX_UNICAST_CNT %-8x\n", hwstat->tx_unicast);
+ pr_debug("TX_PAUSE_FRM_CNT %-8x\n", hwstat->tx_pause_frm);
+ pr_debug("TX_MULTICAST_CNT %-8x\n", hwstat->tx_multicast);
+ pr_debug("TX_BRDCAST_CNT %-8x\n", hwstat->tx_brdcast);
+ pr_debug("TX_VLAN_TAG_CNT %-8x\n", hwstat->tx_vlan_tag);
+ pr_debug("TX_BAD_FCS_CNT %-8x\n", hwstat->tx_bad_fcs);
+ pr_debug("TX_JUMBO_CNT %-8x\n", hwstat->tx_jumbo);
+ pr_debug("TX_BYTE_CNT %-8x\n", hwstat->tx_byte);
+}
+
+static struct net_device_stats *dnet_get_stats(struct net_device *dev)
+{
+
+ struct dnet *bp = netdev_priv(dev);
+ struct net_device_stats *nstat = &dev->stats;
+ struct dnet_stats *hwstat = &bp->hw_stats;
+
+ /* read stats from hardware */
+ dnet_update_stats(bp);
+
+ /* Convert HW stats into netdevice stats */
+ nstat->rx_errors = (hwstat->rx_len_chk_err +
+ hwstat->rx_lng_frm + hwstat->rx_shrt_frm +
+ /* ignore IGP violation error
+ hwstat->rx_ipg_viol + */
+ hwstat->rx_crc_err +
+ hwstat->rx_pre_shrink +
+ hwstat->rx_drib_nib + hwstat->rx_unsup_opcd);
+ nstat->tx_errors = hwstat->tx_bad_fcs;
+ nstat->rx_length_errors = (hwstat->rx_len_chk_err +
+ hwstat->rx_lng_frm +
+ hwstat->rx_shrt_frm + hwstat->rx_pre_shrink);
+ nstat->rx_crc_errors = hwstat->rx_crc_err;
+ nstat->rx_frame_errors = hwstat->rx_pre_shrink + hwstat->rx_drib_nib;
+ nstat->rx_packets = hwstat->rx_ok_pkt;
+ nstat->tx_packets = (hwstat->tx_unicast +
+ hwstat->tx_multicast + hwstat->tx_brdcast);
+ nstat->rx_bytes = hwstat->rx_byte;
+ nstat->tx_bytes = hwstat->tx_byte;
+ nstat->multicast = hwstat->rx_multicast;
+ nstat->rx_missed_errors = hwstat->rx_pkt_ignr;
+
+ dnet_print_pretty_hwstats(hwstat);
+
+ return nstat;
+}
+
+static int dnet_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct dnet *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static int dnet_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct dnet *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+static int dnet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct dnet *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phy_dev;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+}
+
+static void dnet_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, "0");
+}
+
+static const struct ethtool_ops dnet_ethtool_ops = {
+ .get_settings = dnet_get_settings,
+ .set_settings = dnet_set_settings,
+ .get_drvinfo = dnet_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
+static const struct net_device_ops dnet_netdev_ops = {
+ .ndo_open = dnet_open,
+ .ndo_stop = dnet_close,
+ .ndo_get_stats = dnet_get_stats,
+ .ndo_start_xmit = dnet_start_xmit,
+ .ndo_do_ioctl = dnet_ioctl,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+static int __devinit dnet_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct net_device *dev;
+ struct dnet *bp;
+ struct phy_device *phydev;
+ int err = -ENXIO;
+ unsigned int mem_base, mem_size, irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no mmio resource defined\n");
+ goto err_out;
+ }
+ mem_base = res->start;
+ mem_size = resource_size(res);
+ irq = platform_get_irq(pdev, 0);
+
+ if (!request_mem_region(mem_base, mem_size, DRV_NAME)) {
+ dev_err(&pdev->dev, "no memory region available\n");
+ err = -EBUSY;
+ goto err_out;
+ }
+
+ err = -ENOMEM;
+ dev = alloc_etherdev(sizeof(*bp));
+ if (!dev) {
+ dev_err(&pdev->dev, "etherdev alloc failed, aborting.\n");
+ goto err_out;
+ }
+
+ /* TODO: Actually, we have some interesting features... */
+ dev->features |= 0;
+
+ bp = netdev_priv(dev);
+ bp->dev = dev;
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ spin_lock_init(&bp->lock);
+
+ bp->regs = ioremap(mem_base, mem_size);
+ if (!bp->regs) {
+ dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+ err = -ENOMEM;
+ goto err_out_free_dev;
+ }
+
+ dev->irq = irq;
+ err = request_irq(dev->irq, dnet_interrupt, 0, DRV_NAME, dev);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+ irq, err);
+ goto err_out_iounmap;
+ }
+
+ dev->netdev_ops = &dnet_netdev_ops;
+ netif_napi_add(dev, &bp->napi, dnet_poll, 64);
+ dev->ethtool_ops = &dnet_ethtool_ops;
+
+ dev->base_addr = (unsigned long)bp->regs;
+
+ bp->capabilities = dnet_readl(bp, VERCAPS) & DNET_CAPS_MASK;
+
+ dnet_get_hwaddr(bp);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ /* choose a random ethernet address */
+ random_ether_addr(dev->dev_addr);
+ __dnet_set_hwaddr(bp);
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
+ goto err_out_free_irq;
+ }
+
+ /* register the PHY board fixup (for Marvell 88E1111) */
+ err = phy_register_fixup_for_uid(0x01410cc0, 0xfffffff0,
+ dnet_phy_marvell_fixup);
+ /* we can live without it, so just issue a warning */
+ if (err)
+ dev_warn(&pdev->dev, "Cannot register PHY board fixup.\n");
+
+ if (dnet_mii_init(bp) != 0)
+ goto err_out_unregister_netdev;
+
+ dev_info(&pdev->dev, "Dave DNET at 0x%p (0x%08x) irq %d %pM\n",
+ bp->regs, mem_base, dev->irq, dev->dev_addr);
+ dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma \n",
+ (bp->capabilities & DNET_HAS_MDIO) ? "" : "no ",
+ (bp->capabilities & DNET_HAS_IRQ) ? "" : "no ",
+ (bp->capabilities & DNET_HAS_GIGABIT) ? "" : "no ",
+ (bp->capabilities & DNET_HAS_DMA) ? "" : "no ");
+ phydev = bp->phy_dev;
+ dev_info(&pdev->dev, "attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+
+ return 0;
+
+err_out_unregister_netdev:
+ unregister_netdev(dev);
+err_out_free_irq:
+ free_irq(dev->irq, dev);
+err_out_iounmap:
+ iounmap(bp->regs);
+err_out_free_dev:
+ free_netdev(dev);
+err_out:
+ return err;
+}
+
+static int __devexit dnet_remove(struct platform_device *pdev)
+{
+
+ struct net_device *dev;
+ struct dnet *bp;
+
+ dev = platform_get_drvdata(pdev);
+
+ if (dev) {
+ bp = netdev_priv(dev);
+ if (bp->phy_dev)
+ phy_disconnect(bp->phy_dev);
+ mdiobus_unregister(bp->mii_bus);
+ kfree(bp->mii_bus->irq);
+ mdiobus_free(bp->mii_bus);
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ iounmap(bp->regs);
+ free_netdev(dev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver dnet_driver = {
+ .probe = dnet_probe,
+ .remove = __devexit_p(dnet_remove),
+ .driver = {
+ .name = "dnet",
+ },
+};
+
+static int __init dnet_init(void)
+{
+ return platform_driver_register(&dnet_driver);
+}
+
+static void __exit dnet_exit(void)
+{
+ platform_driver_unregister(&dnet_driver);
+}
+
+module_init(dnet_init);
+module_exit(dnet_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Dave DNET Ethernet driver");
+MODULE_AUTHOR("Ilya Yanok <yanok@emcraft.com>, "
+ "Matteo Vit <matteo.vit@dave.eu>");
diff --git a/drivers/net/dnet.h b/drivers/net/dnet.h
new file mode 100644
index 0000000..37f5b30
--- /dev/null
+++ b/drivers/net/dnet.h
@@ -0,0 +1,225 @@
+/*
+ * Dave DNET Ethernet Controller driver
+ *
+ * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _DNET_H
+#define _DNET_H
+
+#define DRV_NAME "dnet"
+#define DRV_VERSION "0.9.1"
+#define PFX DRV_NAME ": "
+
+/* Register access macros */
+#define dnet_writel(port, value, reg) \
+ writel((value), (port)->regs + DNET_##reg)
+#define dnet_readl(port, reg) readl((port)->regs + DNET_##reg)
+
+/* ALL DNET FIFO REGISTERS */
+#define DNET_RX_LEN_FIFO 0x000 /* RX_LEN_FIFO */
+#define DNET_RX_DATA_FIFO 0x004 /* RX_DATA_FIFO */
+#define DNET_TX_LEN_FIFO 0x008 /* TX_LEN_FIFO */
+#define DNET_TX_DATA_FIFO 0x00C /* TX_DATA_FIFO */
+
+/* ALL DNET CONTROL/STATUS REGISTERS OFFSETS */
+#define DNET_VERCAPS 0x100 /* VERCAPS */
+#define DNET_INTR_SRC 0x104 /* INTR_SRC */
+#define DNET_INTR_ENB 0x108 /* INTR_ENB */
+#define DNET_RX_STATUS 0x10C /* RX_STATUS */
+#define DNET_TX_STATUS 0x110 /* TX_STATUS */
+#define DNET_RX_FRAMES_CNT 0x114 /* RX_FRAMES_CNT */
+#define DNET_TX_FRAMES_CNT 0x118 /* TX_FRAMES_CNT */
+#define DNET_RX_FIFO_TH 0x11C /* RX_FIFO_TH */
+#define DNET_TX_FIFO_TH 0x120 /* TX_FIFO_TH */
+#define DNET_SYS_CTL 0x124 /* SYS_CTL */
+#define DNET_PAUSE_TMR 0x128 /* PAUSE_TMR */
+#define DNET_RX_FIFO_WCNT 0x12C /* RX_FIFO_WCNT */
+#define DNET_TX_FIFO_WCNT 0x130 /* TX_FIFO_WCNT */
+
+/* ALL DNET MAC REGISTERS */
+#define DNET_MACREG_DATA 0x200 /* Mac-Reg Data */
+#define DNET_MACREG_ADDR 0x204 /* Mac-Reg Addr */
+
+/* ALL DNET RX STATISTICS COUNTERS */
+#define DNET_RX_PKT_IGNR_CNT 0x300
+#define DNET_RX_LEN_CHK_ERR_CNT 0x304
+#define DNET_RX_LNG_FRM_CNT 0x308
+#define DNET_RX_SHRT_FRM_CNT 0x30C
+#define DNET_RX_IPG_VIOL_CNT 0x310
+#define DNET_RX_CRC_ERR_CNT 0x314
+#define DNET_RX_OK_PKT_CNT 0x318
+#define DNET_RX_CTL_FRM_CNT 0x31C
+#define DNET_RX_PAUSE_FRM_CNT 0x320
+#define DNET_RX_MULTICAST_CNT 0x324
+#define DNET_RX_BROADCAST_CNT 0x328
+#define DNET_RX_VLAN_TAG_CNT 0x32C
+#define DNET_RX_PRE_SHRINK_CNT 0x330
+#define DNET_RX_DRIB_NIB_CNT 0x334
+#define DNET_RX_UNSUP_OPCD_CNT 0x338
+#define DNET_RX_BYTE_CNT 0x33C
+
+/* DNET TX STATISTICS COUNTERS */
+#define DNET_TX_UNICAST_CNT 0x400
+#define DNET_TX_PAUSE_FRM_CNT 0x404
+#define DNET_TX_MULTICAST_CNT 0x408
+#define DNET_TX_BRDCAST_CNT 0x40C
+#define DNET_TX_VLAN_TAG_CNT 0x410
+#define DNET_TX_BAD_FCS_CNT 0x414
+#define DNET_TX_JUMBO_CNT 0x418
+#define DNET_TX_BYTE_CNT 0x41C
+
+/* SOME INTERNAL MAC-CORE REGISTER */
+#define DNET_INTERNAL_MODE_REG 0x0
+#define DNET_INTERNAL_RXTX_CONTROL_REG 0x2
+#define DNET_INTERNAL_MAX_PKT_SIZE_REG 0x4
+#define DNET_INTERNAL_IGP_REG 0x8
+#define DNET_INTERNAL_MAC_ADDR_0_REG 0xa
+#define DNET_INTERNAL_MAC_ADDR_1_REG 0xc
+#define DNET_INTERNAL_MAC_ADDR_2_REG 0xe
+#define DNET_INTERNAL_TX_RX_STS_REG 0x12
+#define DNET_INTERNAL_GMII_MNG_CTL_REG 0x14
+#define DNET_INTERNAL_GMII_MNG_DAT_REG 0x16
+
+#define DNET_INTERNAL_GMII_MNG_CMD_FIN (1 << 14)
+
+#define DNET_INTERNAL_WRITE (1 << 31)
+
+/* MAC-CORE REGISTER FIELDS */
+
+/* MAC-CORE MODE REGISTER FIELDS */
+#define DNET_INTERNAL_MODE_GBITEN (1 << 0)
+#define DNET_INTERNAL_MODE_FCEN (1 << 1)
+#define DNET_INTERNAL_MODE_RXEN (1 << 2)
+#define DNET_INTERNAL_MODE_TXEN (1 << 3)
+
+/* MAC-CORE RXTX CONTROL REGISTER FIELDS */
+#define DNET_INTERNAL_RXTX_CONTROL_RXSHORTFRAME (1 << 8)
+#define DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST (1 << 7)
+#define DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST (1 << 4)
+#define DNET_INTERNAL_RXTX_CONTROL_RXPAUSE (1 << 3)
+#define DNET_INTERNAL_RXTX_CONTROL_DISTXFCS (1 << 2)
+#define DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS (1 << 1)
+#define DNET_INTERNAL_RXTX_CONTROL_ENPROMISC (1 << 0)
+#define DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL (1 << 6)
+#define DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP (1 << 5)
+
+/* SYSTEM CONTROL REGISTER FIELDS */
+#define DNET_SYS_CTL_IGNORENEXTPKT (1 << 0)
+#define DNET_SYS_CTL_SENDPAUSE (1 << 2)
+#define DNET_SYS_CTL_RXFIFOFLUSH (1 << 3)
+#define DNET_SYS_CTL_TXFIFOFLUSH (1 << 4)
+
+/* TX STATUS REGISTER FIELDS */
+#define DNET_TX_STATUS_FIFO_ALMOST_EMPTY (1 << 2)
+#define DNET_TX_STATUS_FIFO_ALMOST_FULL (1 << 1)
+
+/* INTERRUPT SOURCE REGISTER FIELDS */
+#define DNET_INTR_SRC_TX_PKTSENT (1 << 0)
+#define DNET_INTR_SRC_TX_FIFOAF (1 << 1)
+#define DNET_INTR_SRC_TX_FIFOAE (1 << 2)
+#define DNET_INTR_SRC_TX_DISCFRM (1 << 3)
+#define DNET_INTR_SRC_TX_FIFOFULL (1 << 4)
+#define DNET_INTR_SRC_RX_CMDFIFOAF (1 << 8)
+#define DNET_INTR_SRC_RX_CMDFIFOFF (1 << 9)
+#define DNET_INTR_SRC_RX_DATAFIFOFF (1 << 10)
+#define DNET_INTR_SRC_TX_SUMMARY (1 << 16)
+#define DNET_INTR_SRC_RX_SUMMARY (1 << 17)
+#define DNET_INTR_SRC_PHY (1 << 19)
+
+/* INTERRUPT ENABLE REGISTER FIELDS */
+#define DNET_INTR_ENB_TX_PKTSENT (1 << 0)
+#define DNET_INTR_ENB_TX_FIFOAF (1 << 1)
+#define DNET_INTR_ENB_TX_FIFOAE (1 << 2)
+#define DNET_INTR_ENB_TX_DISCFRM (1 << 3)
+#define DNET_INTR_ENB_TX_FIFOFULL (1 << 4)
+#define DNET_INTR_ENB_RX_PKTRDY (1 << 8)
+#define DNET_INTR_ENB_RX_FIFOAF (1 << 9)
+#define DNET_INTR_ENB_RX_FIFOERR (1 << 10)
+#define DNET_INTR_ENB_RX_ERROR (1 << 11)
+#define DNET_INTR_ENB_RX_FIFOFULL (1 << 12)
+#define DNET_INTR_ENB_RX_FIFOAE (1 << 13)
+#define DNET_INTR_ENB_TX_SUMMARY (1 << 16)
+#define DNET_INTR_ENB_RX_SUMMARY (1 << 17)
+#define DNET_INTR_ENB_GLOBAL_ENABLE (1 << 18)
+
+/* default values:
+ * almost empty = less than one full sized ethernet frame (no jumbo) inside
+ * the fifo almost full = can write less than one full sized ethernet frame
+ * (no jumbo) inside the fifo
+ */
+#define DNET_CFG_TX_FIFO_FULL_THRES 25
+#define DNET_CFG_RX_FIFO_FULL_THRES 20
+
+/*
+ * Capabilities. Used by the driver to know the capabilities that the ethernet
+ * controller inside the FPGA have.
+ */
+
+#define DNET_HAS_MDIO (1 << 0)
+#define DNET_HAS_IRQ (1 << 1)
+#define DNET_HAS_GIGABIT (1 << 2)
+#define DNET_HAS_DMA (1 << 3)
+
+#define DNET_HAS_MII (1 << 4) /* or GMII */
+#define DNET_HAS_RMII (1 << 5) /* or RGMII */
+
+#define DNET_CAPS_MASK 0xFFFF
+
+#define DNET_FIFO_SIZE 1024 /* 1K x 32 bit */
+#define DNET_FIFO_TX_DATA_AF_TH (DNET_FIFO_SIZE - 384) /* 384 = 1536 / 4 */
+#define DNET_FIFO_TX_DATA_AE_TH 384
+
+#define DNET_FIFO_RX_CMD_AF_TH (1 << 16) /* just one frame inside the FIFO */
+
+/*
+ * Hardware-collected statistics.
+ */
+struct dnet_stats {
+ u32 rx_pkt_ignr;
+ u32 rx_len_chk_err;
+ u32 rx_lng_frm;
+ u32 rx_shrt_frm;
+ u32 rx_ipg_viol;
+ u32 rx_crc_err;
+ u32 rx_ok_pkt;
+ u32 rx_ctl_frm;
+ u32 rx_pause_frm;
+ u32 rx_multicast;
+ u32 rx_broadcast;
+ u32 rx_vlan_tag;
+ u32 rx_pre_shrink;
+ u32 rx_drib_nib;
+ u32 rx_unsup_opcd;
+ u32 rx_byte;
+ u32 tx_unicast;
+ u32 tx_pause_frm;
+ u32 tx_multicast;
+ u32 tx_brdcast;
+ u32 tx_vlan_tag;
+ u32 tx_bad_fcs;
+ u32 tx_jumbo;
+ u32 tx_byte;
+};
+
+struct dnet {
+ void __iomem *regs;
+ spinlock_t lock;
+ struct platform_device *pdev;
+ struct net_device *dev;
+ struct dnet_stats hw_stats;
+ unsigned int capabilities; /* read from FPGA */
+ struct napi_struct napi;
+
+ /* PHY stuff */
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ unsigned int link;
+ unsigned int speed;
+ unsigned int duplex;
+};
+
+#endif /* _DNET_H */
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 87a7066..6fd7aa6 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2594,6 +2594,9 @@
if (of_device_is_compatible(np, "ibm,emac-460ex") ||
of_device_is_compatible(np, "ibm,emac-460gt"))
dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX;
+ if (of_device_is_compatible(np, "ibm,emac-405ex") ||
+ of_device_is_compatible(np, "ibm,emac-405exr"))
+ dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
} else if (of_device_is_compatible(np, "ibm,emac4")) {
dev->features |= EMAC_FTR_EMAC4;
if (of_device_is_compatible(np, "ibm,emac-440gx"))
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index a50db53..9dd13ad 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1023,11 +1023,10 @@
struct net_device *netdev;
struct igb_adapter *adapter;
struct e1000_hw *hw;
- struct pci_dev *us_dev;
const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
unsigned long mmio_start, mmio_len;
- int i, err, pci_using_dac, pos;
- u16 eeprom_data = 0, state = 0;
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
u16 eeprom_apme_mask = IGB_EEPROM_APME;
u32 part_num;
int bars, need_ioport;
@@ -1062,27 +1061,6 @@
}
}
- /* 82575 requires that the pci-e link partner disable the L0s state */
- switch (pdev->device) {
- case E1000_DEV_ID_82575EB_COPPER:
- case E1000_DEV_ID_82575EB_FIBER_SERDES:
- case E1000_DEV_ID_82575GB_QUAD_COPPER:
- us_dev = pdev->bus->self;
- pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
- if (pos) {
- pci_read_config_word(us_dev, pos + PCI_EXP_LNKCTL,
- &state);
- state &= ~PCIE_LINK_STATE_L0S;
- pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
- state);
- dev_info(&pdev->dev,
- "Disabling ASPM L0s upstream switch port %s\n",
- pci_name(us_dev));
- }
- default:
- break;
- }
-
err = pci_request_selected_regions(pdev, bars, igb_driver_name);
if (err)
goto err_pci_reg;
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 31794c2..e775338 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -24,9 +24,8 @@
#include <mach/dma.h>
#include <mach/irda.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-uart.h>
+#include <mach/regs-ost.h>
#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d2f4d5f..5d364a9 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3973,6 +3973,7 @@
.ndo_stop = ixgbe_close,
.ndo_start_xmit = ixgbe_xmit_frame,
.ndo_get_stats = ixgbe_get_stats,
+ .ndo_set_rx_mode = ixgbe_set_rx_mode,
.ndo_set_multicast_list = ixgbe_set_rx_mode,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = ixgbe_set_mac,
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 08b3405..a6e1a35 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -957,13 +957,14 @@
goto out_inc;
i = atomic_read(&rxring->next_to_clean);
- while (limit-- > 0) {
+ while (limit > 0) {
rxdesc = rxring->desc;
rxdesc += i;
if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
goto out;
+ --limit;
desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 13f11f4..b0bc3bc 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -2030,11 +2030,6 @@
}
/*
- * Add configured unicast address to address filter table.
- */
- mv643xx_eth_program_unicast_filter(mp->dev);
-
- /*
* Receive all unmatched unicast, TCP, UDP, BPDU and broadcast
* frames to RX queue #0, and include the pseudo-header when
* calculating receive checksums.
@@ -2047,6 +2042,11 @@
wrlp(mp, PORT_CONFIG_EXT, 0x00000000);
/*
+ * Add configured unicast addresses to address filter table.
+ */
+ mv643xx_eth_program_unicast_filter(mp->dev);
+
+ /*
* Enable the receive queues.
*/
for (i = 0; i < mp->rxq_count; i++) {
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index f4dd9ac..1ff066b 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1595,7 +1595,6 @@
}
-int netxen_is_flash_supported(struct netxen_adapter *adapter);
int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
extern void netxen_change_ringparam(struct netxen_adapter *adapter);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 821cff6..7fea770 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -706,28 +706,6 @@
return rc;
}
-int netxen_is_flash_supported(struct netxen_adapter *adapter)
-{
- const int locs[] = { 0, 0x4, 0x100, 0x4000, 0x4128 };
- int addr, val01, val02, i, j;
-
- /* if the flash size less than 4Mb, make huge war cry and die */
- for (j = 1; j < 4; j++) {
- addr = j * NETXEN_NIC_WINDOW_MARGIN;
- for (i = 0; i < ARRAY_SIZE(locs); i++) {
- if (netxen_rom_fast_read(adapter, locs[i], &val01) == 0
- && netxen_rom_fast_read(adapter, (addr + locs[i]),
- &val02) == 0) {
- if (val01 == val02)
- return -1;
- } else
- return -1;
- }
- }
-
- return 0;
-}
-
static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
int size, __le32 * buf)
{
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 1308778..c172b6e 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -405,9 +405,6 @@
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- if (netxen_is_flash_supported(adapter) != 0)
- return -EIO;
-
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
return -EIO;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index e5cb6b1..2404a83 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1035,7 +1035,8 @@
DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
- (--worklimit >= 0)) {
+ worklimit > 0) {
+ worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 73ecc65..1e01b8a 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -857,7 +857,8 @@
DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
- (--worklimit >= 0)) {
+ worklimit > 0) {
+ worklimit--;
if (rx_status & 0x4000) { /* Error, update stats. */
short error = rx_status & 0x3800;
dev->stats.rx_errors++;
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index e6fdce9..aff9c5f 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -927,6 +927,7 @@
u8 flags1;
#define IB_MAC_IOCB_RSP_OI 0x01 /* Overide intr delay */
#define IB_MAC_IOCB_RSP_I 0x02 /* Disble Intr Generation */
+#define IB_MAC_CSUM_ERR_MASK 0x1c /* A mask to use for csum errs */
#define IB_MAC_IOCB_RSP_TE 0x04 /* Checksum error */
#define IB_MAC_IOCB_RSP_NU 0x08 /* No checksum rcvd */
#define IB_MAC_IOCB_RSP_IE 0x10 /* IPv4 checksum error */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 8ea72dc..91191f7 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1436,18 +1436,32 @@
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
}
- if (ib_mac_rsp->flags1 & (IB_MAC_IOCB_RSP_IE | IB_MAC_IOCB_RSP_TE)) {
- QPRINTK(qdev, RX_STATUS, ERR,
- "Bad checksum for this %s packet.\n",
- ((ib_mac_rsp->
- flags2 & IB_MAC_IOCB_RSP_T) ? "TCP" : "UDP"));
- skb->ip_summed = CHECKSUM_NONE;
- } else if (qdev->rx_csum &&
- ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) ||
- ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
- !(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_NU)))) {
- QPRINTK(qdev, RX_STATUS, DEBUG, "RX checksum done!\n");
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ skb->protocol = eth_type_trans(skb, ndev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* If rx checksum is on, and there are no
+ * csum or frame errors.
+ */
+ if (qdev->rx_csum &&
+ !(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
+ !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+ /* TCP frame. */
+ if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+ QPRINTK(qdev, RX_STATUS, DEBUG,
+ "TCP checksum done!\n");
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+ (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+ /* Unfragmented ipv4 UDP frame. */
+ struct iphdr *iph = (struct iphdr *) skb->data;
+ if (!(iph->frag_off &
+ cpu_to_be16(IP_MF|IP_OFFSET))) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ QPRINTK(qdev, RX_STATUS, DEBUG,
+ "TCP checksum done!\n");
+ }
+ }
}
qdev->stats.rx_packets++;
qdev->stats.rx_bytes += skb->len;
@@ -1927,6 +1941,9 @@
tx_ring = &qdev->tx_ring[tx_ring_idx];
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+
if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
QPRINTK(qdev, TX_QUEUED, INFO,
"%s: shutting down tx queue %d du to lack of resources.\n",
@@ -2970,9 +2987,9 @@
mask = value << 16;
ql_write32(qdev, SYS, mask | value);
- /* Set the default queue. */
- value = NIC_RCV_CFG_DFQ;
- mask = NIC_RCV_CFG_DFQ_MASK;
+ /* Set the default queue, and VLAN behavior. */
+ value = NIC_RCV_CFG_DFQ | NIC_RCV_CFG_RV;
+ mask = NIC_RCV_CFG_DFQ_MASK | (NIC_RCV_CFG_RV << 16);
ql_write32(qdev, NIC_RCV_CFG, (mask | value));
/* Set the MPI interrupt to enabled. */
@@ -3149,6 +3166,11 @@
ql_tx_ring_clean(qdev);
+ /* Call netif_napi_del() from common point.
+ */
+ for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
+ netif_napi_del(&qdev->rx_ring[i].napi);
+
spin_lock(&qdev->hw_lock);
status = ql_adapter_reset(qdev);
if (status)
@@ -3853,7 +3875,7 @@
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
- int err, i;
+ int err;
netif_device_detach(ndev);
@@ -3863,9 +3885,6 @@
return err;
}
- for (i = qdev->rss_ring_first_cq_id; i < qdev->rx_ring_count; i++)
- netif_napi_del(&qdev->rx_ring[i].napi);
-
err = pci_save_state(pdev);
if (err)
return err;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b347340..43fedb9 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -81,9 +81,9 @@
#define RTL8169_TX_TIMEOUT (6*HZ)
#define RTL8169_PHY_TIMEOUT (10*HZ)
-#define RTL_EEPROM_SIG 0x8129
+#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
+#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
#define RTL_EEPROM_SIG_ADDR 0x0000
-#define RTL_EEPROM_MAC_ADDR 0x0007
/* write/read MMIO register */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
@@ -293,11 +293,6 @@
/* Cfg9346Bits */
Cfg9346_Lock = 0x00,
Cfg9346_Unlock = 0xc0,
- Cfg9346_Program = 0x80, /* Programming mode */
- Cfg9346_EECS = 0x08, /* Chip select */
- Cfg9346_EESK = 0x04, /* Serial data clock */
- Cfg9346_EEDI = 0x02, /* Data input */
- Cfg9346_EEDO = 0x01, /* Data output */
/* rx_mode_bits */
AcceptErr = 0x20,
@@ -310,7 +305,6 @@
/* RxConfigBits */
RxCfgFIFOShift = 13,
RxCfgDMAShift = 8,
- RxCfg9356SEL = 6, /* EEPROM type: 0 = 9346, 1 = 9356 */
/* TxConfigBits */
TxInterFrameGapShift = 24,
@@ -1969,108 +1963,6 @@
};
-/* Delay between EEPROM clock transitions. Force out buffered PCI writes. */
-#define RTL_EEPROM_DELAY() RTL_R8(Cfg9346)
-#define RTL_EEPROM_READ_CMD 6
-
-/* read 16bit word stored in EEPROM. EEPROM is addressed by words. */
-static u16 rtl_eeprom_read(void __iomem *ioaddr, int addr)
-{
- u16 result = 0;
- int cmd, cmd_len, i;
-
- /* check for EEPROM address size (in bits) */
- if (RTL_R32(RxConfig) & (1 << RxCfg9356SEL)) {
- /* EEPROM is 93C56 */
- cmd_len = 3 + 8; /* 3 bits for command id and 8 for address */
- cmd = (RTL_EEPROM_READ_CMD << 8) | (addr & 0xff);
- } else {
- /* EEPROM is 93C46 */
- cmd_len = 3 + 6; /* 3 bits for command id and 6 for address */
- cmd = (RTL_EEPROM_READ_CMD << 6) | (addr & 0x3f);
- }
-
- /* enter programming mode */
- RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
- RTL_EEPROM_DELAY();
-
- /* write command and requested address */
- while (cmd_len--) {
- u8 x = Cfg9346_Program | Cfg9346_EECS;
-
- x |= (cmd & (1 << cmd_len)) ? Cfg9346_EEDI : 0;
-
- /* write a bit */
- RTL_W8(Cfg9346, x);
- RTL_EEPROM_DELAY();
-
- /* raise clock */
- RTL_W8(Cfg9346, x | Cfg9346_EESK);
- RTL_EEPROM_DELAY();
- }
-
- /* lower clock */
- RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
- RTL_EEPROM_DELAY();
-
- /* read back 16bit value */
- for (i = 16; i > 0; i--) {
- /* raise clock */
- RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS | Cfg9346_EESK);
- RTL_EEPROM_DELAY();
-
- result <<= 1;
- result |= (RTL_R8(Cfg9346) & Cfg9346_EEDO) ? 1 : 0;
-
- /* lower clock */
- RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
- RTL_EEPROM_DELAY();
- }
-
- RTL_W8(Cfg9346, Cfg9346_Program);
- /* leave programming mode */
- RTL_W8(Cfg9346, Cfg9346_Lock);
-
- return result;
-}
-
-static void rtl_init_mac_address(struct rtl8169_private *tp,
- void __iomem *ioaddr)
-{
- struct pci_dev *pdev = tp->pci_dev;
- u16 x;
- u8 mac[8];
-
- /* read EEPROM signature */
- x = rtl_eeprom_read(ioaddr, RTL_EEPROM_SIG_ADDR);
-
- if (x != RTL_EEPROM_SIG) {
- dev_info(&pdev->dev, "Missing EEPROM signature: %04x\n", x);
- return;
- }
-
- /* read MAC address */
- x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR);
- mac[0] = x & 0xff;
- mac[1] = x >> 8;
- x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 1);
- mac[2] = x & 0xff;
- mac[3] = x >> 8;
- x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 2);
- mac[4] = x & 0xff;
- mac[5] = x >> 8;
-
- if (netif_msg_probe(tp)) {
- DECLARE_MAC_BUF(buf);
-
- dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
- print_mac(buf, mac));
- }
-
- if (is_valid_ether_addr(mac))
- rtl_rar_set(tp, mac);
-}
-
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -2249,8 +2141,6 @@
tp->mmio_addr = ioaddr;
- rtl_init_mac_address(tp, ioaddr);
-
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
@@ -3363,13 +3253,6 @@
opts1 |= FirstFrag;
} else {
len = skb->len;
-
- if (unlikely(len < ETH_ZLEN)) {
- if (skb_padto(skb, ETH_ZLEN))
- goto err_update_stats;
- len = ETH_ZLEN;
- }
-
opts1 |= FirstFrag | LastFrag;
tp->tx_skb[entry].skb = skb;
}
@@ -3407,7 +3290,6 @@
err_stop:
netif_stop_queue(dev);
ret = NETDEV_TX_BUSY;
-err_update_stats:
dev->stats.tx_dropped++;
goto out;
}
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 7f8e514..7b18827 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -687,6 +687,7 @@
{
struct net_device *ndev = netdev;
struct sh_eth_private *mdp = netdev_priv(ndev);
+ irqreturn_t ret = IRQ_NONE;
u32 ioaddr, boguscnt = RX_RING_SIZE;
u32 intr_status = 0;
@@ -696,7 +697,13 @@
/* Get interrpt stat */
intr_status = ctrl_inl(ioaddr + EESR);
/* Clear interrupt */
- ctrl_outl(intr_status, ioaddr + EESR);
+ if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
+ EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
+ TX_CHECK | EESR_ERR_CHECK)) {
+ ctrl_outl(intr_status, ioaddr + EESR);
+ ret = IRQ_HANDLED;
+ } else
+ goto other_irq;
if (intr_status & (EESR_FRC | /* Frame recv*/
EESR_RMAF | /* Multi cast address recv*/
@@ -723,9 +730,10 @@
ndev->name, intr_status);
}
+other_irq:
spin_unlock(&mdp->lock);
- return IRQ_HANDLED;
+ return ret;
}
static void sh_eth_timer(unsigned long data)
@@ -844,7 +852,13 @@
int ret = 0;
struct sh_eth_private *mdp = netdev_priv(ndev);
- ret = request_irq(ndev->irq, &sh_eth_interrupt, 0, ndev->name, ndev);
+ ret = request_irq(ndev->irq, &sh_eth_interrupt,
+#if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
+ IRQF_SHARED,
+#else
+ 0,
+#endif
+ ndev->name, ndev);
if (ret) {
printk(KERN_ERR "Can not assign IRQ number to %s\n", CARDNAME);
return ret;
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 73bc718..1537e13 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -43,8 +43,8 @@
#define SH7763_SKB_ALIGN 32
/* Chip Base Address */
-# define SH_TSU_ADDR 0xFFE01800
-# define ARSTR 0xFFE01800
+# define SH_TSU_ADDR 0xFEE01800
+# define ARSTR SH_TSU_ADDR
/* Chip Registers */
/* E-DMAC */
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 870b4c3..8140f7c 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -42,6 +42,16 @@
#define SMC_USE_16BIT 0
#define SMC_USE_32BIT 1
#define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+#elif defined(CONFIG_ARCH_OMAP34XX)
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+ #define SMC_MEM_RESERVED 1
+#elif defined(CONFIG_ARCH_OMAP24XX)
+ #define SMC_USE_16BIT 0
+ #define SMC_USE_32BIT 1
+ #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW
+ #define SMC_MEM_RESERVED 1
#else
/*
* Default configuration
@@ -226,8 +236,7 @@
* Use a DMA for RX and TX packets.
*/
#include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
static dma_addr_t rx_dmabuf, tx_dmabuf;
static int rx_dmalen, tx_dmalen;
@@ -675,6 +684,7 @@
#define CHIP_9116 0x0116
#define CHIP_9117 0x0117
#define CHIP_9118 0x0118
+#define CHIP_9211 0x9211
#define CHIP_9215 0x115A
#define CHIP_9217 0x117A
#define CHIP_9218 0x118A
@@ -689,6 +699,7 @@
{ CHIP_9116, "LAN9116" },
{ CHIP_9117, "LAN9117" },
{ CHIP_9118, "LAN9118" },
+ { CHIP_9211, "LAN9211" },
{ CHIP_9215, "LAN9215" },
{ CHIP_9217, "LAN9217" },
{ CHIP_9218, "LAN9218" },
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index c4ccd12..1083e2c 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -44,6 +44,7 @@
defined(CONFIG_MACH_MAINSTONE) ||\
defined(CONFIG_MACH_ZYLONITE) ||\
defined(CONFIG_MACH_LITTLETON) ||\
+ defined(CONFIG_MACH_ZYLONITE2) ||\
defined(CONFIG_ARCH_VIPER)
#include <asm/mach-types.h>
@@ -494,8 +495,6 @@
*/
#include <linux/dma-mapping.h>
#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#ifdef SMC_insl
#undef SMC_insl
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 9a78dae..d1590ac 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1225,6 +1225,10 @@
dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
(unsigned long)pdata->ioaddr, dev->irq);
+ /* Reset the last known duplex and carrier */
+ pdata->last_duplex = -1;
+ pdata->last_carrier = -1;
+
/* Bring the PHY up */
phy_start(pdata->phy_dev);
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 8d64b1d..c9c7650 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1229,7 +1229,7 @@
break;
} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
- if (limit <= 0)
+ if (limit < 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
@@ -2998,8 +2998,11 @@
.ndo_do_ioctl = gem_ioctl,
.ndo_tx_timeout = gem_tx_timeout,
.ndo_change_mtu = gem_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = gem_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = gem_poll_controller,
+#endif
};
static int __devinit gem_init_one(struct pci_dev *pdev,
@@ -3161,10 +3164,6 @@
dev->watchdog_timeo = 5 * HZ;
dev->irq = pdev->irq;
dev->dma = 0;
- dev->set_mac_address = gem_set_mac_address;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = gem_poll_controller;
-#endif
/* Set that now, in case PM kicks in now */
pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index d4fb4ac..4e9bd38 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2649,8 +2649,6 @@
int err = -ENODEV;
sbus_dp = to_of_device(op->dev.parent)->node;
- if (is_qfe)
- sbus_dp = to_of_device(op->dev.parent->parent)->node;
/* We can match PCI devices too, do not accept those here. */
if (strcmp(sbus_dp->name, "sbus"))
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b080f94..dabdf59 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1473,7 +1473,8 @@
{
u32 reg;
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
return;
reg = MII_TG3_MISC_SHDW_WREN |
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 5f60177..e2150b3 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -121,11 +121,6 @@
goto err_out_trdev;
}
- ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
- dev->name, dev);
- if (ret)
- goto err_out_region;
-
dev->base_addr = pci_ioaddr;
dev->irq = pci_irq_line;
dev->dma = 0;
@@ -142,7 +137,7 @@
ret = tmsdev_init(dev, &pdev->dev);
if (ret) {
printk("%s: unable to get memory for dev->priv.\n", dev->name);
- goto err_out_irq;
+ goto err_out_region;
}
tp = netdev_priv(dev);
@@ -157,6 +152,11 @@
tp->tmspriv = cardinfo;
+ ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (ret)
+ goto err_out_tmsdev;
+
dev->open = tms380tr_open;
dev->stop = tms380tr_close;
pci_set_drvdata(pdev, dev);
@@ -164,15 +164,15 @@
ret = register_netdev(dev);
if (ret)
- goto err_out_tmsdev;
+ goto err_out_irq;
return 0;
+err_out_irq:
+ free_irq(pdev->irq, dev);
err_out_tmsdev:
pci_set_drvdata(pdev, NULL);
tmsdev_term(dev);
-err_out_irq:
- free_irq(pdev->irq, dev);
err_out_region:
release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
err_out_trdev:
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index bee75fa..2abb5d3 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -255,6 +255,7 @@
static void tulip_tx_timeout(struct net_device *dev);
static void tulip_init_ring(struct net_device *dev);
+static void tulip_free_ring(struct net_device *dev);
static int tulip_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int tulip_open(struct net_device *dev);
static int tulip_close(struct net_device *dev);
@@ -502,16 +503,21 @@
{
int retval;
- if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev)))
- return retval;
-
tulip_init_ring (dev);
+ retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev);
+ if (retval)
+ goto free_ring;
+
tulip_up (dev);
netif_start_queue (dev);
return 0;
+
+free_ring:
+ tulip_free_ring (dev);
+ return retval;
}
@@ -768,23 +774,11 @@
tulip_set_power_state (tp, 0, 1);
}
-
-static int tulip_close (struct net_device *dev)
+static void tulip_free_ring (struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
- void __iomem *ioaddr = tp->base_addr;
int i;
- netif_stop_queue (dev);
-
- tulip_down (dev);
-
- if (tulip_debug > 1)
- printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
- dev->name, ioread32 (ioaddr + CSR5));
-
- free_irq (dev->irq, dev);
-
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb = tp->rx_buffers[i].skb;
@@ -803,6 +797,7 @@
dev_kfree_skb (skb);
}
}
+
for (i = 0; i < TX_RING_SIZE; i++) {
struct sk_buff *skb = tp->tx_buffers[i].skb;
@@ -814,6 +809,24 @@
tp->tx_buffers[i].skb = NULL;
tp->tx_buffers[i].mapping = 0;
}
+}
+
+static int tulip_close (struct net_device *dev)
+{
+ struct tulip_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->base_addr;
+
+ netif_stop_queue (dev);
+
+ tulip_down (dev);
+
+ if (tulip_debug > 1)
+ printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
+ dev->name, ioread32 (ioaddr + CSR5));
+
+ free_irq (dev->irq, dev);
+
+ tulip_free_ring (dev);
return 0;
}
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index e879868..1f61e42 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1536,32 +1536,15 @@
static int init_phy(struct net_device *dev)
{
struct ucc_geth_private *priv = netdev_priv(dev);
- struct device_node *np = priv->node;
- struct device_node *phy, *mdio;
- const phandle *ph;
- char bus_name[MII_BUS_ID_SIZE];
- const unsigned int *id;
+ struct ucc_geth_info *ug_info = priv->ug_info;
struct phy_device *phydev;
- char phy_id[BUS_ID_SIZE];
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
- ph = of_get_property(np, "phy-handle", NULL);
- phy = of_find_node_by_phandle(*ph);
- mdio = of_get_parent(phy);
-
- id = of_get_property(phy, "reg", NULL);
-
- of_node_put(phy);
- of_node_put(mdio);
-
- uec_mdio_bus_name(bus_name, mdio);
- snprintf(phy_id, sizeof(phy_id), "%s:%02x",
- bus_name, *id);
-
- phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
+ phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
+ priv->phy_interface);
if (IS_ERR(phydev)) {
printk("%s: Could not attach to PHY\n", dev->name);
@@ -3629,10 +3612,12 @@
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
fixed_link = of_get_property(np, "fixed-link", NULL);
if (fixed_link) {
- snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
- ug_info->phy_address = fixed_link[0];
+ snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+ PHY_ID_FMT, "0", fixed_link[0]);
phy = NULL;
} else {
+ char bus_name[MII_BUS_ID_SIZE];
+
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
@@ -3643,7 +3628,6 @@
prop = of_get_property(phy, "reg", NULL);
if (prop == NULL)
return -1;
- ug_info->phy_address = *prop;
/* Set the bus id */
mdio = of_get_parent(phy);
@@ -3657,7 +3641,9 @@
if (err)
return -1;
- snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", res.start);
+ uec_mdio_bus_name(bus_name, mdio);
+ snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+ "%s:%02x", bus_name, *prop);
}
/* get the phy interface type, or default to MII */
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 16cbe42..611bdef 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1091,8 +1091,7 @@
u32 eventRegMask;
u16 pausePeriod;
u16 extensionField;
- u8 phy_address;
- char mdio_bus[MII_BUS_ID_SIZE];
+ char phy_bus_id[BUS_ID_SIZE];
u8 weightfactor[NUM_TX_QUEUES];
u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 5463591..0ada4ed 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -107,7 +107,7 @@
static int uec_mdio_reset(struct mii_bus *bus)
{
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
- unsigned int timeout = PHY_INIT_TIMEOUT;
+ int timeout = PHY_INIT_TIMEOUT;
mutex_lock(&bus->mdio_lock);
@@ -123,7 +123,7 @@
mutex_unlock(&bus->mdio_lock);
- if (timeout <= 0) {
+ if (timeout < 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
return -EBUSY;
}
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5b67bbf..81682c6 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -635,6 +635,10 @@
USB_DEVICE(0x0a47, 0x9601), /* Hirose USB-100 */
.driver_info = (unsigned long)&dm9601_info,
},
+ {
+ USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{}, // END
};
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c5691fd..fb53ef8 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1838,17 +1838,19 @@
{
struct sk_buff *skb = tdinfo->skb;
int i;
+ int pktlen;
/*
* Don't unmap the pre-allocated tx_bufs
*/
if (tdinfo->skb_dma) {
+ pktlen = (skb->len > ETH_ZLEN ? : ETH_ZLEN);
for (i = 0; i < tdinfo->nskb_dma; i++) {
#ifdef VELOCITY_ZERO_COPY_SUPPORT
pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
#else
- pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
#endif
tdinfo->skb_dma[i] = 0;
}
@@ -2080,17 +2082,14 @@
struct tx_desc *td_ptr;
struct velocity_td_info *tdinfo;
unsigned long flags;
- int pktlen = skb->len;
+ int pktlen;
__le16 len;
int index;
-
- if (skb->len < ETH_ZLEN) {
- if (skb_padto(skb, ETH_ZLEN))
- goto out;
- pktlen = ETH_ZLEN;
- }
+ if (skb_padto(skb, ETH_ZLEN))
+ goto out;
+ pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
len = cpu_to_le16(pktlen);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c688083..e67d16c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -612,6 +612,7 @@
.set_tx_csum = virtnet_set_tx_csum,
.set_sg = ethtool_op_set_sg,
.set_tso = ethtool_op_set_tso,
+ .get_link = ethtool_op_get_link,
};
#define MIN_MTU 68
@@ -739,6 +740,8 @@
goto unregister;
}
+ netif_carrier_on(dev);
+
pr_debug("virtnet: registered device %s\n", dev->name);
return 0;
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
index d278135..6650f60 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -587,8 +587,8 @@
u8 iso[3];
};
-#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
-#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
+#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
#define SM(_v, _f) (((_v) << _f##_S) & _f)
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 4ca2aed..139566c 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -701,6 +701,7 @@
struct ath_hal *sc_ah;
void __iomem *mem;
spinlock_t sc_resetlock;
+ spinlock_t sc_serial_rw;
struct mutex mutex;
u8 sc_curbssid[ETH_ALEN];
@@ -751,4 +752,36 @@
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
int ath_cabq_update(struct ath_softc *);
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static inline void ath9k_iowrite32(struct ath_hal *ah, u32 reg_offset, u32 val)
+{
+ if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+static inline unsigned int ath9k_ioread32(struct ath_hal *ah, u32 reg_offset)
+{
+ u32 val;
+ if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ return val;
+}
+
#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index 34474ed..c38a00b 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -437,6 +437,25 @@
}
ah->ah_config.intr_mitigation = 1;
+
+ /*
+ * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+ * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
+ * This means we use it for all AR5416 devices, and the few
+ * minor PCI AR9280 devices out there.
+ *
+ * Serialization is required because these devices do not handle
+ * well the case of two concurrent reads/writes due to the latency
+ * involved. During one read/write another read/write can be issued
+ * on another CPU while the previous read/write may still be working
+ * on our hardware, if we hit this case the hardware poops in a loop.
+ * We prevent this by serializing reads and writes.
+ *
+ * This issue is not present on PCI-Express devices or pre-AR5416
+ * devices (legacy, 802.11abg).
+ */
+ if (num_possible_cpus() > 1)
+ ah->ah_config.serialize_regmode = SER_REG_MODE_AUTO;
}
static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
@@ -668,7 +687,8 @@
}
if (ah->ah_config.serialize_regmode == SER_REG_MODE_AUTO) {
- if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI) {
+ if (ah->ah_macVersion == AR_SREV_VERSION_5416_PCI ||
+ (AR_SREV_9280(ah) && !ah->ah_isPciExpress)) {
ah->ah_config.serialize_regmode =
SER_REG_MODE_ON;
} else {
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 0e80990..3c04044 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1336,6 +1336,7 @@
printk(KERN_ERR "Unable to create debugfs files\n");
spin_lock_init(&sc->sc_resetlock);
+ spin_lock_init(&sc->sc_serial_rw);
mutex_init(&sc->mutex);
tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 36bafeb..129e2d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3868,7 +3868,7 @@
}
err = iwl_eeprom_check_version(priv);
if (err)
- goto out_iounmap;
+ goto out_free_eeprom;
/* extract MAC Address */
iwl_eeprom_get_mac(priv, priv->mac_addr);
@@ -3945,6 +3945,8 @@
return 0;
out_remove_sysfs:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
out_uninit_drv:
iwl_uninit_drv(priv);
@@ -3953,8 +3955,8 @@
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
- pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
+ pci_release_regions(pdev);
out_pci_disable_device:
pci_disable_device(pdev);
out_ieee80211_free_hw:
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 93be74a..57dd34e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -7911,7 +7911,7 @@
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (err < 0) {
IWL_DEBUG_INFO("Failed to init the card\n");
- goto out_remove_sysfs;
+ goto out_iounmap;
}
/***********************
@@ -7921,7 +7921,7 @@
err = iwl3945_eeprom_init(priv);
if (err) {
IWL_ERROR("Unable to init EEPROM\n");
- goto out_remove_sysfs;
+ goto out_iounmap;
}
/* MAC Address location in EEPROM same for 3945/4965 */
get_eeprom_mac(priv, priv->mac_addr);
@@ -7975,7 +7975,7 @@
err = iwl3945_init_channel_map(priv);
if (err) {
IWL_ERROR("initializing regulatory failed: %d\n", err);
- goto out_release_irq;
+ goto out_unset_hw_setting;
}
err = iwl3945_init_geos(priv);
@@ -8045,25 +8045,22 @@
return 0;
out_remove_sysfs:
+ destroy_workqueue(priv->workqueue);
+ priv->workqueue = NULL;
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_free_geos:
iwl3945_free_geos(priv);
out_free_channel_map:
iwl3945_free_channel_map(priv);
-
-
- out_release_irq:
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
+ out_unset_hw_setting:
iwl3945_unset_hw_setting(priv);
-
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
pci_release_regions(pdev);
out_pci_disable_device:
- pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
out_ieee80211_free_hw:
ieee80211_free_hw(priv->hw);
out:
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 34561e6..f170106 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -710,10 +710,11 @@
__le32 req_id)
{
struct p54_common *priv = dev->priv;
- struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *entry;
unsigned long flags;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ entry = priv->tx_queue.next;
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
@@ -732,7 +733,7 @@
struct p54_common *priv = dev->priv;
struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
- struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+ struct sk_buff *entry;
u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
struct memrecord *range = NULL;
u32 freed = 0;
@@ -741,6 +742,7 @@
int count, idx;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ entry = (struct sk_buff *) priv->tx_queue.next;
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
@@ -976,7 +978,7 @@
struct p54_hdr *data, u32 len)
{
struct p54_common *priv = dev->priv;
- struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *entry;
struct sk_buff *target_skb = NULL;
struct ieee80211_tx_info *info;
struct memrecord *range;
@@ -1014,6 +1016,7 @@
}
}
+ entry = priv->tx_queue.next;
while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index af6b584..3e2ac2b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1952,6 +1952,8 @@
{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* CNet */
+ { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Conceptronic */
{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
/* D-LINK */
@@ -1976,14 +1978,20 @@
{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Sagem */
+ { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Siemens */
{ USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
/* SMC */
{ USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Spairon */
{ USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* SURECOM */
+ { USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Trust */
{ USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* VTech */
+ { USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
/* Zinwell */
{ USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
{ 0, }
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 96a8d69..cefee1b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2281,7 +2281,18 @@
*/
static struct usb_device_id rt73usb_device_table[] = {
/* AboCom */
+ { USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* AL */
+ { USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Amigo */
+ { USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* AMIT */
+ { USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
/* Askey */
{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
/* ASUS */
@@ -2294,7 +2305,9 @@
{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
/* Billionton */
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
/* Buffalo */
+ { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2308,6 +2321,11 @@
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Edimax */
+ { USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* EnGenius */
+ { USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gigabyte */
@@ -2328,22 +2346,34 @@
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ralink */
+ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
/* Qcom */
{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Samsung */
+ { USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
/* Senao */
{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
/* Sitecom */
- { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
/* Surecom */
{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
/* Planex */
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Zcom */
+ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* ZyXEL */
+ { USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
{ 0, }
};
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index a611ad8..847057d 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -575,13 +575,17 @@
r = fill_ctrlset(mac, skb);
if (r)
- return r;
+ goto fail;
info->rate_driver_data[0] = hw;
r = zd_usb_tx(&mac->chip.usb, skb);
if (r)
- return r;
+ goto fail;
+ return 0;
+
+fail:
+ dev_kfree_skb(skb);
return 0;
}
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index d539d9d..bb5a1c9 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -479,7 +479,7 @@
res = &dino_dev->hba.lmmio_space;
res->flags = IORESOURCE_MEM;
size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)",
- bus->bridge->bus_id);
+ dev_name(bus->bridge));
res->name = kmalloc(size+1, GFP_KERNEL);
if(res->name)
strcpy((char *)res->name, name);
@@ -493,7 +493,7 @@
struct list_head *ln, *tmp_ln;
printk(KERN_ERR "Dino: cannot attach bus %s\n",
- bus->bridge->bus_id);
+ dev_name(bus->bridge));
/* kill the bus, we can't do anything with it */
list_for_each_safe(ln, tmp_ln, &bus->devices) {
struct pci_dev *dev = pci_dev_b(ln);
@@ -587,7 +587,7 @@
bus->resource[i+1] = &res[i];
}
- } else if(bus->self) {
+ } else if (bus->parent) {
int i;
pci_read_bridge_bases(bus);
@@ -611,12 +611,12 @@
}
DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n",
- bus->self->dev.bus_id, i,
+ dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
pci_assign_resource(bus->self, i);
DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
- bus->self->dev.bus_id, i,
+ dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
}
@@ -1026,7 +1026,8 @@
dino_current_bus = bus->subordinate + 1;
pci_bus_assign_resources(bus);
} else {
- printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", dev->dev.bus_id, dino_current_bus);
+ printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+ dev_name(&dev->dev), dino_current_bus);
/* increment the bus number in case of duplicates */
dino_current_bus++;
}
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index e76db9e..d336329 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -186,29 +186,34 @@
*irqp = irq;
}
-static struct device *next_device(struct klist_iter *i)
+struct gsc_fixup_struct {
+ void (*choose_irq)(struct parisc_device *, void *);
+ void *ctrl;
+};
+
+static int gsc_fixup_irqs_callback(struct device *dev, void *data)
{
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+ struct parisc_device *padev = to_parisc_device(dev);
+ struct gsc_fixup_struct *gf = data;
+
+ /* work-around for 715/64 and others which have parent
+ at path [5] and children at path [5/0/x] */
+ if (padev->id.hw_type == HPHW_FAULTY)
+ gsc_fixup_irqs(padev, gf->ctrl, gf->choose_irq);
+ gf->choose_irq(padev, gf->ctrl);
+
+ return 0;
}
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose_irq)(struct parisc_device *, void *))
{
- struct device *dev;
- struct klist_iter i;
+ struct gsc_fixup_struct data = {
+ .choose_irq = choose_irq,
+ .ctrl = ctrl,
+ };
- klist_iter_init(&parent->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *padev = to_parisc_device(dev);
-
- /* work-around for 715/64 and others which have parent
- at path [5] and children at path [5/0/x] */
- if (padev->id.hw_type == HPHW_FAULTY)
- return gsc_fixup_irqs(padev, ctrl, choose_irq);
- choose_irq(padev, ctrl);
- }
- klist_iter_exit(&i);
+ device_for_each_child(&parent->dev, &data, gsc_fixup_irqs_callback);
}
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 0797659..501aaf1 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -487,7 +487,7 @@
}
/* Check if pcidev behind a PPB */
- if (NULL != pcidev->bus->self) {
+ if (pcidev->bus->parent) {
/* Convert pcidev INTR_PIN into something we
** can lookup in the IRT.
*/
@@ -523,10 +523,9 @@
#endif /* PCI_BRIDGE_FUNCS */
/*
- ** Locate the host slot the PPB nearest the Host bus
- ** adapter.
- */
- while (NULL != p->parent->self)
+ * Locate the host slot of the PPB.
+ */
+ while (p->parent->parent)
p = p->parent;
intr_slot = PCI_SLOT(p->self->devfn);
@@ -709,11 +708,14 @@
struct vector_info *vi = iosapic_get_vector(irq);
u32 d0, d1, dummy_d0;
unsigned long flags;
+ int dest_cpu;
- if (cpu_check_affinity(irq, dest))
+ dest_cpu = cpu_check_affinity(irq, dest);
+ if (dest_cpu < 0)
return;
- vi->txn_addr = txn_affinity_addr(irq, cpumask_first(dest));
+ irq_desc[irq].affinity = cpumask_of_cpu(dest_cpu);
+ vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
spin_lock_irqsave(&iosapic_lock, flags);
/* d1 contains the destination CPU, so only want to set that
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index d8233de..59fbbf1 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -644,7 +644,7 @@
** Properly Setup MMIO resources for this bus.
** pci_alloc_primary_bus() mangles this.
*/
- if (bus->self) {
+ if (bus->parent) {
int i;
/* PCI-PCI Bridge */
pci_read_bridge_bases(bus);
@@ -802,7 +802,7 @@
** Can't fixup here anyway....garr...
*/
if (fbb_enable) {
- if (bus->self) {
+ if (bus->parent) {
u8 control;
/* enable on PPB */
(void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index a70cf16..e5999c4 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1206,31 +1206,49 @@
return (void *) pdir_base;
}
-static struct device *next_device(struct klist_iter *i)
+struct ibase_data_struct {
+ struct ioc *ioc;
+ int ioc_num;
+};
+
+static int setup_ibase_imask_callback(struct device *dev, void *data)
{
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ extern void lba_set_iregs(struct parisc_device *, u32, u32);
+ struct parisc_device *lba = to_parisc_device(dev);
+ struct ibase_data_struct *ibd = data;
+ int rope_num = (lba->hpa.start >> 13) & 0xf;
+ if (rope_num >> 3 == ibd->ioc_num)
+ lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask);
+ return 0;
}
/* setup Mercury or Elroy IBASE/IMASK registers. */
static void
setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
- /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
- extern void lba_set_iregs(struct parisc_device *, u32, u32);
- struct device *dev;
- struct klist_iter i;
+ struct ibase_data_struct ibase_data = {
+ .ioc = ioc,
+ .ioc_num = ioc_num,
+ };
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *lba = to_parisc_device(dev);
- int rope_num = (lba->hpa.start >> 13) & 0xf;
- if (rope_num >> 3 == ioc_num)
- lba_set_iregs(lba, ioc->ibase, ioc->imask);
- }
- klist_iter_exit(&i);
+ device_for_each_child(&sba->dev, &ibase_data,
+ setup_ibase_imask_callback);
}
+#ifdef SBA_AGP_SUPPORT
+static int
+sba_ioc_find_quicksilver(struct device *dev, void *data)
+{
+ int *agp_found = data;
+ struct parisc_device *lba = to_parisc_device(dev);
+
+ if (IS_QUICKSILVER(lba))
+ *agp_found = 1;
+ return 0;
+}
+#endif
+
static void
sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
@@ -1332,9 +1350,6 @@
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
#ifdef SBA_AGP_SUPPORT
-{
- struct klist_iter i;
- struct device *dev = NULL;
/*
** If an AGP device is present, only use half of the IOV space
@@ -1344,13 +1359,7 @@
** We program the next pdir index after we stop w/ a key for
** the GART code to handshake on.
*/
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *lba = to_parisc_device(dev);
- if (IS_QUICKSILVER(lba))
- agp_found = 1;
- }
- klist_iter_exit(&i);
+ device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver);
if (agp_found && sba_reserve_agpgart) {
printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
@@ -1358,9 +1367,7 @@
ioc->pdir_size /= 2;
ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
}
-}
#endif /*SBA_AGP_SUPPORT*/
-
}
static void
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index eacfb13..9aa4fe1 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -143,7 +143,7 @@
config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
- depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+ depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE
help
Say Y here if you have a RPA system that supports PCI Hotplug.
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index d0c9736..3825750 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -133,6 +133,9 @@
bool enable)
{
set_device_error_reporting(dev, &enable);
+
+ if (!dev->subordinate)
+ return;
pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
}
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 248b4db..5ea566e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -103,6 +103,7 @@
static void pcie_portdrv_remove (struct pci_dev *dev)
{
pcie_port_device_remove(dev);
+ pci_disable_device(dev);
kfree(pci_get_drvdata(dev));
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f20d553..92b9efe 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -23,6 +23,7 @@
#include <linux/acpi.h>
#include <linux/kallsyms.h>
#include <linux/dmi.h>
+#include <linux/pci-aspm.h>
#include "pci.h"
int isa_dma_bridge_buggy;
@@ -1749,6 +1750,30 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
+/*
+ * The 82575 and 82598 may experience data corruption issues when transitioning
+ * out of L0S. To prevent this we need to disable L0S on the pci-e link
+ */
+static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
+{
+ dev_info(&dev->dev, "Disabling L0s\n");
+ pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+
static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
{
/* rev 1 ncr53c810 chips don't set the class at all which means
@@ -2097,7 +2122,7 @@
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
&flags) == 0) {
- dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
+ dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
flags & ~HT_MSI_FLAGS_ENABLE);
@@ -2141,6 +2166,10 @@
int pos;
int found;
+ /* Enabling HT MSI mapping on this device breaks MCP51 */
+ if (dev->device == 0x270)
+ return;
+
/* check if there is HT MSI cap or enabled on this device */
found = ht_check_msi_mapping(dev);
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index bb9ddb9..16f84aa 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -28,7 +28,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <asm/mach-types.h>
@@ -39,6 +38,44 @@
#include "soc_common.h"
#include "pxa2xx_base.h"
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb) * PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA(Nb) + 2 * PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA(Nb) + 3 * PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */
+
#define MCXX_SETUP_MASK (0x7f)
#define MCXX_ASST_MASK (0x1f)
@@ -183,23 +220,67 @@
MECR &= ~MECR_NOS;
}
+static const char *skt_names[] = {
+ "PCMCIA socket 0",
+ "PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+ (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
int __pxa2xx_drv_pcmcia_probe(struct device *dev)
{
- int ret;
+ int i, ret;
struct pcmcia_low_level *ops;
+ struct skt_dev_info *sinfo;
+ struct soc_pcmcia_socket *skt;
if (!dev || !dev->platform_data)
return -ENODEV;
ops = (struct pcmcia_low_level *)dev->platform_data;
+ sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
+ if (!sinfo)
+ return -ENOMEM;
+
+ sinfo->nskt = ops->nr;
+
+ /* Initialize processor specific parameters */
+ for (i = 0; i < ops->nr; i++) {
+ skt = &sinfo->skt[i];
+
+ skt->nr = i;
+ skt->irq = NO_IRQ;
+
+ skt->res_skt.start = _PCMCIA(skt->nr);
+ skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+ skt->res_skt.name = skt_names[skt->nr];
+ skt->res_skt.flags = IORESOURCE_MEM;
+
+ skt->res_io.start = _PCMCIAIO(skt->nr);
+ skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+ skt->res_io.name = "io";
+ skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ skt->res_mem.start = _PCMCIAMem(skt->nr);
+ skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+ skt->res_mem.name = "memory";
+ skt->res_mem.flags = IORESOURCE_MEM;
+
+ skt->res_attr.start = _PCMCIAAttr(skt->nr);
+ skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+ skt->res_attr.name = "attribute";
+ skt->res_attr.flags = IORESOURCE_MEM;
+ }
+
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
#ifdef CONFIG_CPU_FREQ
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
- ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
+ ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo);
if (!ret)
pxa2xx_configure_sockets(dev);
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 7c8bcb4..4ed64d8 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -16,7 +16,6 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 6c3aac3..a7b943d 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,7 +16,6 @@
#include <linux/gpio.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index f663a01..d09c0dc 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -16,8 +16,6 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/eseries-gpio.h>
#include <asm/irq.h>
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 37ec55d..6cbb1b1 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -24,7 +24,6 @@
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
#include <mach/lubbock.h>
#include "sa1111_generic.h"
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 877001d..1138551 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -21,11 +21,10 @@
#include <pcmcia/ss.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/mainstone.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index 36c7a0b..e0e5cb3 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -22,8 +22,7 @@
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/trizeps4.h>
#include "soc_common.h"
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index dd10481..1787136 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -26,7 +26,6 @@
#include <asm/irq.h>
-#include <mach/pxa-regs.h>
#include <mach/viper.h>
#include <asm/mach-types.h>
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 6de4e1b..0cc3748 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -37,9 +37,9 @@
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
/* Disable CF bus: */
- clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
- clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
- set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
}
static void
@@ -79,10 +79,7 @@
return -1;
}
- if (state->flags & SS_RESET)
- set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
- else
- clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
/* Silently ignore Vpp, output enable, speaker enable. */
@@ -92,9 +89,9 @@
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
- set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
- set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
- clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
msleep(10);
@@ -112,10 +109,10 @@
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
- clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
- clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
/* hmm, does this suck power? */
- set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
+ assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
}
}
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 6924d0e..401052a 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -11,12 +11,12 @@
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <pcmcia/ss.h>
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include "sa1111_generic.h"
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 7cb1273..e15d59f 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -36,9 +36,9 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
@@ -163,9 +163,55 @@
return p - buf;
}
+static const char *skt_names[] = {
+ "PCMCIA socket 0",
+ "PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+ (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
int first, int nr)
{
+ struct skt_dev_info *sinfo;
+ struct soc_pcmcia_socket *skt;
+ int i;
+
+ sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
+ if (!sinfo)
+ return -ENOMEM;
+
+ sinfo->nskt = nr;
+
+ /* Initiliaze processor specific parameters */
+ for (i = 0; i < nr; i++) {
+ skt = &sinfo->skt[i];
+
+ skt->nr = first + i;
+ skt->irq = NO_IRQ;
+
+ skt->res_skt.start = _PCMCIA(skt->nr);
+ skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+ skt->res_skt.name = skt_names[skt->nr];
+ skt->res_skt.flags = IORESOURCE_MEM;
+
+ skt->res_io.start = _PCMCIAIO(skt->nr);
+ skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+ skt->res_io.name = "io";
+ skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+ skt->res_mem.start = _PCMCIAMem(skt->nr);
+ skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+ skt->res_mem.name = "memory";
+ skt->res_mem.flags = IORESOURCE_MEM;
+
+ skt->res_attr.start = _PCMCIAAttr(skt->nr);
+ skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+ skt->res_attr.name = "attribute";
+ skt->res_attr.flags = IORESOURCE_MEM;
+ }
+
/*
* set default MECR calculation if the board specific
* code did not specify one...
@@ -180,7 +226,7 @@
ops->frequency_change = sa1100_pcmcia_frequency_change;
#endif
- return soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+ return soc_common_drv_pcmcia_probe(dev, ops, sinfo);
}
EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index f49ac66..163cf98 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -49,11 +49,6 @@
#include "soc_common.h"
-/* FIXME: platform dependent resource declaration has to move out of this file */
-#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
-#endif
-
#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
@@ -581,19 +576,6 @@
LIST_HEAD(soc_pcmcia_sockets);
static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
-static const char *skt_names[] = {
- "PCMCIA socket 0",
- "PCMCIA socket 1",
-};
-
-struct skt_dev_info {
- int nskt;
- struct soc_pcmcia_socket skt[0];
-};
-
-#define SKT_DEV_INFO_SIZE(n) \
- (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
-
#ifdef CONFIG_CPU_FREQ
static int
soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
@@ -637,26 +619,18 @@
static void soc_pcmcia_cpufreq_unregister(void) {}
#endif
-int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
+int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
+ struct skt_dev_info *sinfo)
{
- struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
int ret, i;
mutex_lock(&soc_pcmcia_sockets_lock);
- sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
- if (!sinfo) {
- ret = -ENOMEM;
- goto out;
- }
-
- sinfo->nskt = nr;
-
/*
* Initialise the per-socket structure.
*/
- for (i = 0; i < nr; i++) {
+ for (i = 0; i < sinfo->nskt; i++) {
skt = &sinfo->skt[i];
skt->socket.ops = &soc_common_pcmcia_operations;
@@ -668,43 +642,21 @@
skt->poll_timer.data = (unsigned long)skt;
skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
- skt->nr = first + i;
- skt->irq = NO_IRQ;
skt->dev = dev;
skt->ops = ops;
- skt->res_skt.start = _PCMCIA(skt->nr);
- skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
- skt->res_skt.name = skt_names[skt->nr];
- skt->res_skt.flags = IORESOURCE_MEM;
-
ret = request_resource(&iomem_resource, &skt->res_skt);
if (ret)
goto out_err_1;
- skt->res_io.start = _PCMCIAIO(skt->nr);
- skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
- skt->res_io.name = "io";
- skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-
ret = request_resource(&skt->res_skt, &skt->res_io);
if (ret)
goto out_err_2;
- skt->res_mem.start = _PCMCIAMem(skt->nr);
- skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
- skt->res_mem.name = "memory";
- skt->res_mem.flags = IORESOURCE_MEM;
-
ret = request_resource(&skt->res_skt, &skt->res_mem);
if (ret)
goto out_err_3;
- skt->res_attr.start = _PCMCIAAttr(skt->nr);
- skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
- skt->res_attr.name = "attribute";
- skt->res_attr.flags = IORESOURCE_MEM;
-
ret = request_resource(&skt->res_skt, &skt->res_attr);
if (ret)
goto out_err_4;
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 38c6737..290e143 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -58,6 +58,11 @@
struct list_head node;
};
+struct skt_dev_info {
+ int nskt;
+ struct soc_pcmcia_socket skt[0];
+};
+
struct pcmcia_state {
unsigned detect: 1,
ready: 1,
@@ -132,7 +137,7 @@
extern struct list_head soc_pcmcia_sockets;
-extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
+extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo);
extern int soc_common_drv_pcmcia_remove(struct device *dev);
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b3866ad..3608081 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -15,8 +15,7 @@
if X86_PLATFORM_DEVICES
config ACER_WMI
- tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Acer WMI Laptop Extras"
depends on ACPI
depends on LEDS_CLASS
depends on NEW_LEDS
@@ -39,9 +38,9 @@
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on ACPI
depends on EXPERIMENTAL && !ACPI_ASUS
- depends on LEDS_CLASS
- depends on NEW_LEDS
- depends on BACKLIGHT_CLASS_DEVICE
+ select LEDS_CLASS
+ select NEW_LEDS
+ select BACKLIGHT_CLASS_DEVICE
depends on INPUT
---help---
This is the new Linux driver for Asus laptops. It may also support some
@@ -185,11 +184,11 @@
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
+ depends on INPUT
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
- select INPUT
select NEW_LEDS
select LEDS_CLASS
select NET
@@ -315,9 +314,8 @@
config ACPI_WMI
- tristate "WMI (EXPERIMENTAL)"
+ tristate "WMI"
depends on ACPI
- depends on EXPERIMENTAL
help
This driver adds support for the ACPI-WMI (Windows Management
Instrumentation) mapper device (PNP0C14) found on some systems.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 94c9f911..a6a42e8 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1026,7 +1026,7 @@
kfree(wireless_rfkill->data);
rfkill_unregister(wireless_rfkill);
if (has_cap(ACER_CAP_BLUETOOTH)) {
- kfree(wireless_rfkill->data);
+ kfree(bluetooth_rfkill->data);
rfkill_unregister(bluetooth_rfkill);
}
return;
@@ -1297,7 +1297,7 @@
set_quirks();
- if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+ if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
interface->capability &= ~ACER_CAP_BRIGHTNESS;
printk(ACER_INFO "Brightness must be controlled by "
"generic video driver\n");
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 56af6cf..eeafc6c 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -815,6 +815,7 @@
static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
+ u16 count;
/* TODO Find a better way to handle events count. */
if (!hotk)
@@ -832,9 +833,11 @@
lcd_blank(FB_BLANK_POWERDOWN);
}
+ count = hotk->event_count[event % 128]++;
+ acpi_bus_generate_proc_event(hotk->device, event, count);
acpi_bus_generate_netlink_event(hotk->device->pnp.device_class,
dev_name(&hotk->device->dev), event,
- hotk->event_count[event % 128]++);
+ count);
if (hotk->inputdev) {
key = asus_get_entry_by_scancode(event);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 786ed86..6f54fd1 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -557,13 +557,17 @@
static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
+ u16 count;
+
if (!ehotk)
return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
notify_brn();
+ count = ehotk->event_count[event % 128]++;
+ acpi_bus_generate_proc_event(ehotk->device, event, count);
acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
dev_name(&ehotk->device->dev), event,
- ehotk->event_count[event % 128]++);
+ count);
if (ehotk->inputdev) {
key = eepc_get_entry_by_scancode(event);
if (key) {
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index bcbc051..d243320 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7532,7 +7532,7 @@
* if it is not there yet.
*/
#define IBM_BIOS_MODULE_ALIAS(__type) \
- MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW")
+ MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
/* Non-ancient thinkpads */
MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
@@ -7541,9 +7541,9 @@
/* Ancient thinkpad BIOSes have to be identified by
* BIOS type or model number, and there are far less
* BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[B,D,H,I,M,N,O,T,W,V,Y,Z]");
-IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]");
-IBM_BIOS_MODULE_ALIAS("K[U,X-Z]");
+IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
+IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
+IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
MODULE_DESCRIPTION(TPACPI_DESC);
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 8a8b377..2f269e11 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -708,7 +708,7 @@
static int __init acpi_wmi_init(void)
{
- acpi_status result;
+ int result;
INIT_LIST_HEAD(&wmi_blocks.list);
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 1d76892..a52d4a1 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -180,10 +180,13 @@
di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
di->empty_uAh *= 1000; /* convert to µAh */
- /* From Maxim Application Note 131: remaining capacity =
- * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
- di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
- (di->full_active_uAh - di->empty_uAh);
+ if (di->full_active_uAh == di->empty_uAh)
+ di->rem_capacity = 0;
+ else
+ /* From Maxim Application Note 131: remaining capacity =
+ * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+ di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+ (di->full_active_uAh - di->empty_uAh);
if (di->rem_capacity < 0)
di->rem_capacity = 0;
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 45f12dc..e0263d2 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -12,6 +12,7 @@
#include <linux/bcd.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/delay.h>
#define RTC_TIME_REG_OFFS 0
@@ -119,6 +120,16 @@
return -EINVAL;
}
+ /* make sure it is actually functional */
+ if (rtc_time == 0x01000000) {
+ ssleep(1);
+ rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
+ if (rtc_time == 0x01000000) {
+ dev_err(&pdev->dev, "internal RTC not ticking\n");
+ return -ENODEV;
+ }
+ }
+
platform_set_drvdata(pdev, pdata);
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
&mv_rtc_ops, THIS_MODULE);
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index d26a5f8..4f247e4 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,7 +35,8 @@
#include <asm/irq.h>
#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-rtc.h>
+#include <mach/regs-ost.h>
#endif
#define RTC_DEF_DIVIDER 32768 - 1
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index f08e169..7e30e5f 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -129,7 +129,7 @@
bp->waiting = 1;
add_wait_queue(&bp->wq, &wait);
while (limit-- > 0) {
- unsigned long val;
+ long val;
val = wait_event_interruptible_timeout(
bp->wq,
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index a9a9893..e6d1fc8 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -38,9 +38,6 @@
#include <linux/string.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
-
-#define MAJOR_NR JSFD_MAJOR
-
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/io.h>
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 29dc735..124f660 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -51,6 +51,7 @@
MODULE_DESCRIPTION("OPENPROM Configuration Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("1.0");
+MODULE_ALIAS_MISCDEV(SUN_OPENPROM_MINOR);
/* Private data kept by the driver for each descriptor. */
typedef struct openprom_private_data
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 68a6412..8ee01b9 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -390,7 +390,8 @@
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "cumanascsi2",
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index bb2477b..d843513 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -508,7 +508,8 @@
.eh_abort_handler = fas216_eh_abort,
.can_queue = 1,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "eesox",
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index d9a546d..e2297b4 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -302,7 +302,8 @@
.can_queue = 8,
.this_id = 7,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
+ .dma_boundary = IOMD_DMA_BOUNDARY,
.cmd_per_lun = 2,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = "powertec",
diff --git a/drivers/scsi/fcoe/fc_transport_fcoe.c b/drivers/scsi/fcoe/fc_transport_fcoe.c
index bf7fe6f..8862758 100644
--- a/drivers/scsi/fcoe/fc_transport_fcoe.c
+++ b/drivers/scsi/fcoe/fc_transport_fcoe.c
@@ -33,19 +33,19 @@
static DEFINE_MUTEX(fcoe_transports_lock);
/**
- * fcoe_transport_default - returns ptr to the default transport fcoe_sw
- **/
+ * fcoe_transport_default() - Returns ptr to the default transport fcoe_sw
+ */
struct fcoe_transport *fcoe_transport_default(void)
{
return &fcoe_sw_transport;
}
/**
- * fcoe_transport_to_pcidev - get the pci dev from a netdev
+ * fcoe_transport_to_pcidev() - get the pci dev from a netdev
* @netdev: the netdev that pci dev will be retrived from
*
* Returns: NULL or the corrsponding pci_dev
- **/
+ */
struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev)
{
if (!netdev->dev.parent)
@@ -54,18 +54,17 @@
}
/**
- * fcoe_transport_device_lookup - find out netdev is managed by the
- * transport
- * assign a transport to a device
+ * fcoe_transport_device_lookup() - Lookup a transport
* @netdev: the netdev the transport to be attached to
*
* This will look for existing offload driver, if not found, it falls back to
* the default sw hba (fcoe_sw) as its fcoe transport.
*
* Returns: 0 for success
- **/
-static struct fcoe_transport_internal *fcoe_transport_device_lookup(
- struct fcoe_transport *t, struct net_device *netdev)
+ */
+static struct fcoe_transport_internal *
+fcoe_transport_device_lookup(struct fcoe_transport *t,
+ struct net_device *netdev)
{
struct fcoe_transport_internal *ti;
@@ -81,14 +80,14 @@
return NULL;
}
/**
- * fcoe_transport_device_add - assign a transport to a device
+ * fcoe_transport_device_add() - Assign a transport to a device
* @netdev: the netdev the transport to be attached to
*
* This will look for existing offload driver, if not found, it falls back to
* the default sw hba (fcoe_sw) as its fcoe transport.
*
* Returns: 0 for success
- **/
+ */
static int fcoe_transport_device_add(struct fcoe_transport *t,
struct net_device *netdev)
{
@@ -123,14 +122,14 @@
}
/**
- * fcoe_transport_device_remove - remove a device from its transport
+ * fcoe_transport_device_remove() - Remove a device from its transport
* @netdev: the netdev the transport to be attached to
*
- * this removes the device from the transport so the given transport will
+ * This removes the device from the transport so the given transport will
* not manage this device any more
*
* Returns: 0 for success
- **/
+ */
static int fcoe_transport_device_remove(struct fcoe_transport *t,
struct net_device *netdev)
{
@@ -155,13 +154,13 @@
}
/**
- * fcoe_transport_device_remove_all - remove all from transport devlist
+ * fcoe_transport_device_remove_all() - Remove all from transport devlist
*
- * this removes the device from the transport so the given transport will
+ * This removes the device from the transport so the given transport will
* not manage this device any more
*
* Returns: 0 for success
- **/
+ */
static void fcoe_transport_device_remove_all(struct fcoe_transport *t)
{
struct fcoe_transport_internal *ti, *tmp;
@@ -175,18 +174,18 @@
}
/**
- * fcoe_transport_match - use the bus device match function to match the hw
- * @t: the fcoe transport
- * @netdev:
+ * fcoe_transport_match() - Use the bus device match function to match the hw
+ * @t: The fcoe transport to check
+ * @netdev: The netdev to match against
*
- * This function is used to check if the givne transport wants to manage the
+ * This function is used to check if the given transport wants to manage the
* input netdev. if the transports implements the match function, it will be
* called, o.w. we just compare the pci vendor and device id.
*
* Returns: true for match up
- **/
+ */
static bool fcoe_transport_match(struct fcoe_transport *t,
- struct net_device *netdev)
+ struct net_device *netdev)
{
/* match transport by vendor and device id */
struct pci_dev *pci;
@@ -210,17 +209,17 @@
}
/**
- * fcoe_transport_lookup - check if the transport is already registered
+ * fcoe_transport_lookup() - Check if the transport is already registered
* @t: the transport to be looked up
*
* This compares the parent device (pci) vendor and device id
*
* Returns: NULL if not found
*
- * TODO - return default sw transport if no other transport is found
- **/
-static struct fcoe_transport *fcoe_transport_lookup(
- struct net_device *netdev)
+ * TODO: return default sw transport if no other transport is found
+ */
+static struct fcoe_transport *
+fcoe_transport_lookup(struct net_device *netdev)
{
struct fcoe_transport *t;
@@ -239,11 +238,11 @@
}
/**
- * fcoe_transport_register - adds a fcoe transport to the fcoe transports list
+ * fcoe_transport_register() - Adds a fcoe transport to the fcoe transports list
* @t: ptr to the fcoe transport to be added
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_register(struct fcoe_transport *t)
{
struct fcoe_transport *tt;
@@ -259,9 +258,6 @@
list_add_tail(&t->list, &fcoe_transports);
mutex_unlock(&fcoe_transports_lock);
- mutex_init(&t->devlock);
- INIT_LIST_HEAD(&t->devlist);
-
printk(KERN_DEBUG "fcoe_transport_register:%s\n", t->name);
return 0;
@@ -269,11 +265,11 @@
EXPORT_SYMBOL_GPL(fcoe_transport_register);
/**
- * fcoe_transport_unregister - remove the tranport fro the fcoe transports list
+ * fcoe_transport_unregister() - Remove the tranport fro the fcoe transports list
* @t: ptr to the fcoe transport to be removed
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_unregister(struct fcoe_transport *t)
{
struct fcoe_transport *tt, *tmp;
@@ -294,8 +290,8 @@
}
EXPORT_SYMBOL_GPL(fcoe_transport_unregister);
-/*
- * fcoe_load_transport_driver - load an offload driver by alias name
+/**
+ * fcoe_load_transport_driver() - Load an offload driver by alias name
* @netdev: the target net device
*
* Requests for an offload driver module as the fcoe transport, if fails, it
@@ -307,7 +303,7 @@
* 3. pure hw fcoe hba may not have netdev
*
* Returns: 0 for success
- **/
+ */
int fcoe_load_transport_driver(struct net_device *netdev)
{
struct pci_dev *pci;
@@ -335,14 +331,14 @@
EXPORT_SYMBOL_GPL(fcoe_load_transport_driver);
/**
- * fcoe_transport_attach - load transport to fcoe
+ * fcoe_transport_attach() - Load transport to fcoe
* @netdev: the netdev the transport to be attached to
*
* This will look for existing offload driver, if not found, it falls back to
* the default sw hba (fcoe_sw) as its fcoe transport.
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_attach(struct net_device *netdev)
{
struct fcoe_transport *t;
@@ -373,11 +369,11 @@
EXPORT_SYMBOL_GPL(fcoe_transport_attach);
/**
- * fcoe_transport_release - unload transport from fcoe
+ * fcoe_transport_release() - Unload transport from fcoe
* @netdev: the net device on which fcoe is to be released
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_release(struct net_device *netdev)
{
struct fcoe_transport *t;
@@ -410,12 +406,12 @@
EXPORT_SYMBOL_GPL(fcoe_transport_release);
/**
- * fcoe_transport_init - initializes fcoe transport layer
+ * fcoe_transport_init() - Initializes fcoe transport layer
*
* This prepares for the fcoe transport layer
*
* Returns: none
- **/
+ */
int __init fcoe_transport_init(void)
{
INIT_LIST_HEAD(&fcoe_transports);
@@ -424,12 +420,13 @@
}
/**
- * fcoe_transport_exit - cleans up the fcoe transport layer
+ * fcoe_transport_exit() - Cleans up the fcoe transport layer
+ *
* This cleans up the fcoe transport layer. removing any transport on the list,
* note that the transport destroy func is not called here.
*
* Returns: none
- **/
+ */
int __exit fcoe_transport_exit(void)
{
struct fcoe_transport *t, *tmp;
diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c
index dc4cd5e..da210eb 100644
--- a/drivers/scsi/fcoe/fcoe_sw.c
+++ b/drivers/scsi/fcoe/fcoe_sw.c
@@ -104,19 +104,19 @@
.max_sectors = 0xffff,
};
-/*
- * fcoe_sw_lport_config - sets up the fc_lport
+/**
+ * fcoe_sw_lport_config() - sets up the fc_lport
* @lp: ptr to the fc_lport
* @shost: ptr to the parent scsi host
*
* Returns: 0 for success
- *
*/
static int fcoe_sw_lport_config(struct fc_lport *lp)
{
int i = 0;
- lp->link_status = 0;
+ lp->link_up = 0;
+ lp->qfull = 0;
lp->max_retry_count = 3;
lp->e_d_tov = 2 * 1000; /* FC-FS default */
lp->r_a_tov = 2 * 2 * 1000;
@@ -136,16 +136,14 @@
return 0;
}
-/*
- * fcoe_sw_netdev_config - sets up fcoe_softc for lport and network
- * related properties
+/**
+ * fcoe_sw_netdev_config() - Set up netdev for SW FCoE
* @lp : ptr to the fc_lport
* @netdev : ptr to the associated netdevice struct
*
* Must be called after fcoe_sw_lport_config() as it will use lport mutex
*
* Returns : 0 for success
- *
*/
static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
{
@@ -181,9 +179,8 @@
if (fc_set_mfs(lp, mfs))
return -EINVAL;
- lp->link_status = ~FC_PAUSE & ~FC_LINK_UP;
if (!fcoe_link_ok(lp))
- lp->link_status |= FC_LINK_UP;
+ lp->link_up = 1;
/* offload features support */
if (fc->real_dev->features & NETIF_F_SG)
@@ -191,6 +188,7 @@
skb_queue_head_init(&fc->fcoe_pending_queue);
+ fc->fcoe_pending_queue_active = 0;
/* setup Source Mac Address */
memcpy(fc->ctl_src_addr, fc->real_dev->dev_addr,
@@ -224,16 +222,15 @@
return 0;
}
-/*
- * fcoe_sw_shost_config - sets up fc_lport->host
+/**
+ * fcoe_sw_shost_config() - Sets up fc_lport->host
* @lp : ptr to the fc_lport
* @shost : ptr to the associated scsi host
* @dev : device associated to scsi host
*
- * Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config()
+ * Must be called after fcoe_sw_lport_config() and fcoe_sw_netdev_config()
*
* Returns : 0 for success
- *
*/
static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
struct device *dev)
@@ -261,8 +258,8 @@
return 0;
}
-/*
- * fcoe_sw_em_config - allocates em for this lport
+/**
+ * fcoe_sw_em_config() - allocates em for this lport
* @lp: the port that em is to allocated for
*
* Returns : 0 on success
@@ -279,8 +276,8 @@
return 0;
}
-/*
- * fcoe_sw_destroy - FCoE software HBA tear-down function
+/**
+ * fcoe_sw_destroy() - FCoE software HBA tear-down function
* @netdev: ptr to the associated net_device
*
* Returns: 0 if link is OK for use by FCoE.
@@ -301,7 +298,7 @@
if (!lp)
return -ENODEV;
- fc = fcoe_softc(lp);
+ fc = lport_priv(lp);
/* Logout of the fabric */
fc_fabric_logoff(lp);
@@ -353,8 +350,8 @@
.frame_send = fcoe_xmit,
};
-/*
- * fcoe_sw_create - this function creates the fcoe interface
+/**
+ * fcoe_sw_create() - this function creates the fcoe interface
* @netdev: pointer the associated netdevice
*
* Creates fc_lport struct and scsi_host for lport, configures lport
@@ -440,8 +437,8 @@
return rc;
}
-/*
- * fcoe_sw_match - the fcoe sw transport match function
+/**
+ * fcoe_sw_match() - The FCoE SW transport match function
*
* Returns : false always
*/
@@ -461,8 +458,8 @@
.device = 0xffff,
};
-/*
- * fcoe_sw_init - registers fcoe_sw_transport
+/**
+ * fcoe_sw_init() - Registers fcoe_sw_transport
*
* Returns : 0 on success
*/
@@ -471,17 +468,22 @@
/* attach to scsi transport */
scsi_transport_fcoe_sw =
fc_attach_transport(&fcoe_sw_transport_function);
+
if (!scsi_transport_fcoe_sw) {
printk(KERN_ERR "fcoe_sw_init:fc_attach_transport() failed\n");
return -ENODEV;
}
+
+ mutex_init(&fcoe_sw_transport.devlock);
+ INIT_LIST_HEAD(&fcoe_sw_transport.devlist);
+
/* register sw transport */
fcoe_transport_register(&fcoe_sw_transport);
return 0;
}
-/*
- * fcoe_sw_exit - unregisters fcoe_sw_transport
+/**
+ * fcoe_sw_exit() - Unregisters fcoe_sw_transport
*
* Returns : 0 on success
*/
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index e419f48..5548bf3 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -49,6 +49,7 @@
static int debug_fcoe;
#define FCOE_MAX_QUEUE_DEPTH 256
+#define FCOE_LOW_QUEUE_DEPTH 32
/* destination address mode */
#define FCOE_GW_ADDR_MODE 0x00
@@ -69,8 +70,6 @@
/* Function Prototyes */
static int fcoe_check_wait_queue(struct fc_lport *);
-static void fcoe_insert_wait_queue_head(struct fc_lport *, struct sk_buff *);
-static void fcoe_insert_wait_queue(struct fc_lport *, struct sk_buff *);
static void fcoe_recv_flogi(struct fcoe_softc *, struct fc_frame *, u8 *);
#ifdef CONFIG_HOTPLUG_CPU
static int fcoe_cpu_callback(struct notifier_block *, ulong, void *);
@@ -91,13 +90,13 @@
};
/**
- * fcoe_create_percpu_data - creates the associated cpu data
+ * fcoe_create_percpu_data() - creates the associated cpu data
* @cpu: index for the cpu where fcoe cpu data will be created
*
* create percpu stats block, from cpu add notifier
*
* Returns: none
- **/
+ */
static void fcoe_create_percpu_data(int cpu)
{
struct fc_lport *lp;
@@ -115,13 +114,13 @@
}
/**
- * fcoe_destroy_percpu_data - destroys the associated cpu data
+ * fcoe_destroy_percpu_data() - destroys the associated cpu data
* @cpu: index for the cpu where fcoe cpu data will destroyed
*
* destroy percpu stats block called by cpu add/remove notifier
*
* Retuns: none
- **/
+ */
static void fcoe_destroy_percpu_data(int cpu)
{
struct fc_lport *lp;
@@ -137,7 +136,7 @@
}
/**
- * fcoe_cpu_callback - fcoe cpu hotplug event callback
+ * fcoe_cpu_callback() - fcoe cpu hotplug event callback
* @nfb: callback data block
* @action: event triggering the callback
* @hcpu: index for the cpu of this event
@@ -145,7 +144,7 @@
* this creates or destroys per cpu data for fcoe
*
* Returns NOTIFY_OK always.
- **/
+ */
static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
@@ -166,7 +165,7 @@
#endif /* CONFIG_HOTPLUG_CPU */
/**
- * fcoe_rcv - this is the fcoe receive function called by NET_RX_SOFTIRQ
+ * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ
* @skb: the receive skb
* @dev: associated net device
* @ptype: context
@@ -175,7 +174,7 @@
* this function will receive the packet and build fc frame and pass it up
*
* Returns: 0 for success
- **/
+ */
int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype, struct net_device *olddev)
{
@@ -265,11 +264,11 @@
EXPORT_SYMBOL_GPL(fcoe_rcv);
/**
- * fcoe_start_io - pass to netdev to start xmit for fcoe
+ * fcoe_start_io() - pass to netdev to start xmit for fcoe
* @skb: the skb to be xmitted
*
* Returns: 0 for success
- **/
+ */
static inline int fcoe_start_io(struct sk_buff *skb)
{
int rc;
@@ -283,12 +282,12 @@
}
/**
- * fcoe_get_paged_crc_eof - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
* @skb: the skb to be xmitted
* @tlen: total len
*
* Returns: 0 for success
- **/
+ */
static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
{
struct fcoe_percpu_s *fps;
@@ -326,13 +325,12 @@
}
/**
- * fcoe_fc_crc - calculates FC CRC in this fcoe skb
+ * fcoe_fc_crc() - calculates FC CRC in this fcoe skb
* @fp: the fc_frame containg data to be checksummed
*
* This uses crc32() to calculate the crc for fc frame
* Return : 32 bit crc
- *
- **/
+ */
u32 fcoe_fc_crc(struct fc_frame *fp)
{
struct sk_buff *skb = fp_skb(fp);
@@ -363,13 +361,12 @@
EXPORT_SYMBOL_GPL(fcoe_fc_crc);
/**
- * fcoe_xmit - FCoE frame transmit function
+ * fcoe_xmit() - FCoE frame transmit function
* @lp: the associated local port
* @fp: the fc_frame to be transmitted
*
* Return : 0 for success
- *
- **/
+ */
int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
{
int wlen, rc = 0;
@@ -389,7 +386,7 @@
WARN_ON((fr_len(fp) % sizeof(u32)) != 0);
- fc = fcoe_softc(lp);
+ fc = lport_priv(lp);
/*
* if it is a flogi then we need to learn gw-addr
* and my own fcid
@@ -439,7 +436,7 @@
if (skb_is_nonlinear(skb)) {
skb_frag_t *frag;
if (fcoe_get_paged_crc_eof(skb, tlen)) {
- kfree(skb);
+ kfree_skb(skb);
return -ENOMEM;
}
frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1];
@@ -502,21 +499,22 @@
rc = fcoe_start_io(skb);
if (rc) {
- fcoe_insert_wait_queue(lp, skb);
+ spin_lock_bh(&fc->fcoe_pending_queue.lock);
+ __skb_queue_tail(&fc->fcoe_pending_queue, skb);
+ spin_unlock_bh(&fc->fcoe_pending_queue.lock);
if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- fc_pause(lp);
+ lp->qfull = 1;
}
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_xmit);
-/*
- * fcoe_percpu_receive_thread - recv thread per cpu
+/**
+ * fcoe_percpu_receive_thread() - recv thread per cpu
* @arg: ptr to the fcoe per cpu struct
*
* Return: 0 for success
- *
*/
int fcoe_percpu_receive_thread(void *arg)
{
@@ -533,7 +531,7 @@
struct fcoe_softc *fc;
struct fcoe_hdr *hp;
- set_user_nice(current, 19);
+ set_user_nice(current, -20);
while (!kthread_should_stop()) {
@@ -658,7 +656,7 @@
}
/**
- * fcoe_recv_flogi - flogi receive function
+ * fcoe_recv_flogi() - flogi receive function
* @fc: associated fcoe_softc
* @fp: the recieved frame
* @sa: the source address of this flogi
@@ -667,7 +665,7 @@
* mac address for the initiator, eitehr OUI based or GW based.
*
* Returns: none
- **/
+ */
static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa)
{
struct fc_frame_header *fh;
@@ -715,32 +713,23 @@
}
/**
- * fcoe_watchdog - fcoe timer callback
+ * fcoe_watchdog() - fcoe timer callback
* @vp:
*
- * This checks the pending queue length for fcoe and put fcoe to be paused state
+ * This checks the pending queue length for fcoe and set lport qfull
* if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
* fcoe_hostlist.
*
* Returns: 0 for success
- **/
+ */
void fcoe_watchdog(ulong vp)
{
- struct fc_lport *lp;
struct fcoe_softc *fc;
- int paused = 0;
read_lock(&fcoe_hostlist_lock);
list_for_each_entry(fc, &fcoe_hostlist, list) {
- lp = fc->lp;
- if (lp) {
- if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- paused = 1;
- if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) {
- if (paused)
- fc_unpause(lp);
- }
- }
+ if (fc->lp)
+ fcoe_check_wait_queue(fc->lp);
}
read_unlock(&fcoe_hostlist_lock);
@@ -750,96 +739,64 @@
/**
- * fcoe_check_wait_queue - put the skb into fcoe pending xmit queue
+ * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
* @lp: the fc_port for this skb
* @skb: the associated skb to be xmitted
*
* This empties the wait_queue, dequeue the head of the wait_queue queue
* and calls fcoe_start_io() for each packet, if all skb have been
- * transmitted, return 0 if a error occurs, then restore wait_queue and
- * try again later.
+ * transmitted, return qlen or -1 if a error occurs, then restore
+ * wait_queue and try again later.
*
* The wait_queue is used when the skb transmit fails. skb will go
* in the wait_queue which will be emptied by the time function OR
* by the next skb transmit.
*
* Returns: 0 for success
- **/
+ */
static int fcoe_check_wait_queue(struct fc_lport *lp)
{
- int rc, unpause = 0;
- int paused = 0;
+ struct fcoe_softc *fc = lport_priv(lp);
struct sk_buff *skb;
- struct fcoe_softc *fc;
+ int rc = -1;
- fc = fcoe_softc(lp);
spin_lock_bh(&fc->fcoe_pending_queue.lock);
+ if (fc->fcoe_pending_queue_active)
+ goto out;
+ fc->fcoe_pending_queue_active = 1;
- /*
- * is this interface paused?
- */
- if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- paused = 1;
- if (fc->fcoe_pending_queue.qlen) {
- while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) {
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
- rc = fcoe_start_io(skb);
- if (rc) {
- fcoe_insert_wait_queue_head(lp, skb);
- return rc;
- }
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
+ while (fc->fcoe_pending_queue.qlen) {
+ /* keep qlen > 0 until fcoe_start_io succeeds */
+ fc->fcoe_pending_queue.qlen++;
+ skb = __skb_dequeue(&fc->fcoe_pending_queue);
+
+ spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+ rc = fcoe_start_io(skb);
+ spin_lock_bh(&fc->fcoe_pending_queue.lock);
+
+ if (rc) {
+ __skb_queue_head(&fc->fcoe_pending_queue, skb);
+ /* undo temporary increment above */
+ fc->fcoe_pending_queue.qlen--;
+ break;
}
- if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH)
- unpause = 1;
+ /* undo temporary increment above */
+ fc->fcoe_pending_queue.qlen--;
}
+
+ if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
+ lp->qfull = 0;
+ fc->fcoe_pending_queue_active = 0;
+ rc = fc->fcoe_pending_queue.qlen;
+out:
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
- if ((unpause) && (paused))
- fc_unpause(lp);
- return fc->fcoe_pending_queue.qlen;
+ return rc;
}
/**
- * fcoe_insert_wait_queue_head - puts skb to fcoe pending queue head
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
- *
- * Returns: none
- **/
-static void fcoe_insert_wait_queue_head(struct fc_lport *lp,
- struct sk_buff *skb)
-{
- struct fcoe_softc *fc;
-
- fc = fcoe_softc(lp);
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
- __skb_queue_head(&fc->fcoe_pending_queue, skb);
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-}
-
-/**
- * fcoe_insert_wait_queue - put the skb into fcoe pending queue tail
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
- *
- * Returns: none
- **/
-static void fcoe_insert_wait_queue(struct fc_lport *lp,
- struct sk_buff *skb)
-{
- struct fcoe_softc *fc;
-
- fc = fcoe_softc(lp);
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
- __skb_queue_tail(&fc->fcoe_pending_queue, skb);
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-}
-
-/**
- * fcoe_dev_setup - setup link change notification interface
- *
- **/
-static void fcoe_dev_setup(void)
+ * fcoe_dev_setup() - setup link change notification interface
+ */
+static void fcoe_dev_setup()
{
/*
* here setup a interface specific wd time to
@@ -849,15 +806,15 @@
}
/**
- * fcoe_dev_setup - cleanup link change notification interface
- **/
+ * fcoe_dev_setup() - cleanup link change notification interface
+ */
static void fcoe_dev_cleanup(void)
{
unregister_netdevice_notifier(&fcoe_notifier);
}
/**
- * fcoe_device_notification - netdev event notification callback
+ * fcoe_device_notification() - netdev event notification callback
* @notifier: context of the notification
* @event: type of event
* @ptr: fixed array for output parsed ifname
@@ -865,7 +822,7 @@
* This function is called by the ethernet driver in case of link change event
*
* Returns: 0 for success
- **/
+ */
static int fcoe_device_notification(struct notifier_block *notifier,
ulong event, void *ptr)
{
@@ -873,7 +830,7 @@
struct net_device *real_dev = ptr;
struct fcoe_softc *fc;
struct fcoe_dev_stats *stats;
- u16 new_status;
+ u32 new_link_up;
u32 mfs;
int rc = NOTIFY_OK;
@@ -890,17 +847,15 @@
goto out;
}
- new_status = lp->link_status;
+ new_link_up = lp->link_up;
switch (event) {
case NETDEV_DOWN:
case NETDEV_GOING_DOWN:
- new_status &= ~FC_LINK_UP;
+ new_link_up = 0;
break;
case NETDEV_UP:
case NETDEV_CHANGE:
- new_status &= ~FC_LINK_UP;
- if (!fcoe_link_ok(lp))
- new_status |= FC_LINK_UP;
+ new_link_up = !fcoe_link_ok(lp);
break;
case NETDEV_CHANGEMTU:
mfs = fc->real_dev->mtu -
@@ -908,17 +863,15 @@
sizeof(struct fcoe_crc_eof));
if (mfs >= FC_MIN_MAX_FRAME)
fc_set_mfs(lp, mfs);
- new_status &= ~FC_LINK_UP;
- if (!fcoe_link_ok(lp))
- new_status |= FC_LINK_UP;
+ new_link_up = !fcoe_link_ok(lp);
break;
case NETDEV_REGISTER:
break;
default:
FC_DBG("unknown event %ld call", event);
}
- if (lp->link_status != new_status) {
- if ((new_status & FC_LINK_UP) == FC_LINK_UP)
+ if (lp->link_up != new_link_up) {
+ if (new_link_up)
fc_linkup(lp);
else {
stats = lp->dev_stats[smp_processor_id()];
@@ -933,12 +886,12 @@
}
/**
- * fcoe_if_to_netdev - parse a name buffer to get netdev
+ * fcoe_if_to_netdev() - parse a name buffer to get netdev
* @ifname: fixed array for output parsed ifname
* @buffer: incoming buffer to be copied
*
* Returns: NULL or ptr to netdeive
- **/
+ */
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
char *cp;
@@ -955,13 +908,13 @@
}
/**
- * fcoe_netdev_to_module_owner - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
* @netdev: the target netdev
*
* Returns: ptr to the struct module, NULL for failure
- **/
-static struct module *fcoe_netdev_to_module_owner(
- const struct net_device *netdev)
+ */
+static struct module *
+fcoe_netdev_to_module_owner(const struct net_device *netdev)
{
struct device *dev;
@@ -979,12 +932,14 @@
}
/**
- * fcoe_ethdrv_get - holds the nic driver module by try_module_get() for
- * the corresponding netdev.
+ * fcoe_ethdrv_get() - Hold the Ethernet driver
* @netdev: the target netdev
*
+ * Holds the Ethernet driver module by try_module_get() for
+ * the corresponding netdev.
+ *
* Returns: 0 for succsss
- **/
+ */
static int fcoe_ethdrv_get(const struct net_device *netdev)
{
struct module *owner;
@@ -999,12 +954,14 @@
}
/**
- * fcoe_ethdrv_get - releases the nic driver module by module_put for
- * the corresponding netdev.
+ * fcoe_ethdrv_put() - Release the Ethernet driver
* @netdev: the target netdev
*
+ * Releases the Ethernet driver module by module_put for
+ * the corresponding netdev.
+ *
* Returns: 0 for succsss
- **/
+ */
static int fcoe_ethdrv_put(const struct net_device *netdev)
{
struct module *owner;
@@ -1020,12 +977,12 @@
}
/**
- * fcoe_destroy- handles the destroy from sysfs
+ * fcoe_destroy() - handles the destroy from sysfs
* @buffer: expcted to be a eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
- **/
+ */
static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
{
int rc;
@@ -1058,12 +1015,12 @@
}
/**
- * fcoe_create - handles the create call from sysfs
+ * fcoe_create() - Handles the create call from sysfs
* @buffer: expcted to be a eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
- **/
+ */
static int fcoe_create(const char *buffer, struct kernel_param *kp)
{
int rc;
@@ -1104,8 +1061,8 @@
__MODULE_PARM_TYPE(destroy, "string");
MODULE_PARM_DESC(destroy, "Destroy fcoe port");
-/*
- * fcoe_link_ok - check if link is ok for the fc_lport
+/**
+ * fcoe_link_ok() - Check if link is ok for the fc_lport
* @lp: ptr to the fc_lport
*
* Any permanently-disqualifying conditions have been previously checked.
@@ -1120,7 +1077,7 @@
*/
int fcoe_link_ok(struct fc_lport *lp)
{
- struct fcoe_softc *fc = fcoe_softc(lp);
+ struct fcoe_softc *fc = lport_priv(lp);
struct net_device *dev = fc->real_dev;
struct ethtool_cmd ecmd = { ETHTOOL_GSET };
int rc = 0;
@@ -1149,9 +1106,8 @@
}
EXPORT_SYMBOL_GPL(fcoe_link_ok);
-/*
- * fcoe_percpu_clean - frees skb of the corresponding lport from the per
- * cpu queue.
+/**
+ * fcoe_percpu_clean() - Clear the pending skbs for an lport
* @lp: the fc_lport
*/
void fcoe_percpu_clean(struct fc_lport *lp)
@@ -1185,11 +1141,11 @@
EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
/**
- * fcoe_clean_pending_queue - dequeue skb and free it
+ * fcoe_clean_pending_queue() - Dequeue a skb and free it
* @lp: the corresponding fc_lport
*
* Returns: none
- **/
+ */
void fcoe_clean_pending_queue(struct fc_lport *lp)
{
struct fcoe_softc *fc = lport_priv(lp);
@@ -1206,21 +1162,21 @@
EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
- * libfc_host_alloc - allocate a Scsi_Host with room for the fc_lport
+ * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport
* @sht: ptr to the scsi host templ
* @priv_size: size of private data after fc_lport
*
* Returns: ptr to Scsi_Host
- * TODO - to libfc?
+ * TODO: to libfc?
*/
-static inline struct Scsi_Host *libfc_host_alloc(
- struct scsi_host_template *sht, int priv_size)
+static inline struct Scsi_Host *
+libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
{
return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size);
}
/**
- * fcoe_host_alloc - allocate a Scsi_Host with room for the fcoe_softc
+ * fcoe_host_alloc() - Allocate a Scsi_Host with room for the fcoe_softc
* @sht: ptr to the scsi host templ
* @priv_size: size of private data after fc_lport
*
@@ -1232,8 +1188,8 @@
}
EXPORT_SYMBOL_GPL(fcoe_host_alloc);
-/*
- * fcoe_reset - resets the fcoe
+/**
+ * fcoe_reset() - Resets the fcoe
* @shost: shost the reset is from
*
* Returns: always 0
@@ -1246,8 +1202,8 @@
}
EXPORT_SYMBOL_GPL(fcoe_reset);
-/*
- * fcoe_wwn_from_mac - converts 48-bit IEEE MAC address to 64-bit FC WWN.
+/**
+ * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN.
* @mac: mac address
* @scheme: check port
* @port: port indicator for converting
@@ -1286,14 +1242,15 @@
return wwn;
}
EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac);
-/*
- * fcoe_hostlist_lookup_softc - find the corresponding lport by a given device
+
+/**
+ * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
* @device: this is currently ptr to net_device
*
* Returns: NULL or the located fcoe_softc
*/
-static struct fcoe_softc *fcoe_hostlist_lookup_softc(
- const struct net_device *dev)
+static struct fcoe_softc *
+fcoe_hostlist_lookup_softc(const struct net_device *dev)
{
struct fcoe_softc *fc;
@@ -1308,8 +1265,8 @@
return NULL;
}
-/*
- * fcoe_hostlist_lookup - find the corresponding lport by netdev
+/**
+ * fcoe_hostlist_lookup() - Find the corresponding lport by netdev
* @netdev: ptr to net_device
*
* Returns: 0 for success
@@ -1324,8 +1281,8 @@
}
EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
-/*
- * fcoe_hostlist_add - add a lport to lports list
+/**
+ * fcoe_hostlist_add() - Add a lport to lports list
* @lp: ptr to the fc_lport to badded
*
* Returns: 0 for success
@@ -1336,7 +1293,7 @@
fc = fcoe_hostlist_lookup_softc(fcoe_netdev(lp));
if (!fc) {
- fc = fcoe_softc(lp);
+ fc = lport_priv(lp);
write_lock_bh(&fcoe_hostlist_lock);
list_add_tail(&fc->list, &fcoe_hostlist);
write_unlock_bh(&fcoe_hostlist_lock);
@@ -1345,8 +1302,8 @@
}
EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
-/*
- * fcoe_hostlist_remove - remove a lport from lports list
+/**
+ * fcoe_hostlist_remove() - remove a lport from lports list
* @lp: ptr to the fc_lport to badded
*
* Returns: 0 for success
@@ -1366,12 +1323,12 @@
EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
/**
- * fcoe_libfc_config - sets up libfc related properties for lport
+ * fcoe_libfc_config() - sets up libfc related properties for lport
* @lp: ptr to the fc_lport
* @tt: libfc function template
*
* Returns : 0 for success
- **/
+ */
int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt)
{
/* Set the function pointers set by the LLDD */
@@ -1389,14 +1346,14 @@
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
/**
- * fcoe_init - fcoe module loading initialization
+ * fcoe_init() - fcoe module loading initialization
*
* Initialization routine
* 1. Will create fc transport software structure
* 2. initialize the link list of port information structure
*
* Returns 0 on success, negative on failure
- **/
+ */
static int __init fcoe_init(void)
{
int cpu;
@@ -1433,7 +1390,6 @@
} else {
fcoe_percpu[cpu] = NULL;
kfree(p);
-
}
}
}
@@ -1443,11 +1399,9 @@
*/
fcoe_dev_setup();
- init_timer(&fcoe_timer);
- fcoe_timer.data = 0;
- fcoe_timer.function = fcoe_watchdog;
- fcoe_timer.expires = (jiffies + (10 * HZ));
- add_timer(&fcoe_timer);
+ setup_timer(&fcoe_timer, fcoe_watchdog, 0);
+
+ mod_timer(&fcoe_timer, jiffies + (10 * HZ));
/* initiatlize the fcoe transport */
fcoe_transport_init();
@@ -1459,10 +1413,10 @@
module_init(fcoe_init);
/**
- * fcoe_exit - fcoe module unloading cleanup
+ * fcoe_exit() - fcoe module unloading cleanup
*
* Returns 0 on success, negative on failure
- **/
+ */
static void __exit fcoe_exit(void)
{
u32 idx;
@@ -1483,7 +1437,7 @@
*/
del_timer_sync(&fcoe_timer);
- /* releases the assocaited fcoe transport for each lport */
+ /* releases the associated fcoe transport for each lport */
list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
fcoe_transport_release(fc->real_dev);
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 4a4e695..f23c4ca 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -103,7 +103,7 @@
hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
if (!hostdata) {
- dev_printk(KERN_ERR, dev, "Failed to allocate host data\n");
+ dev_printk(KERN_ERR, &dev->dev, "Failed to allocate host data\n");
return -ENOMEM;
}
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index dd1564c..e57556ea 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -64,7 +64,7 @@
static void fc_disc_restart(struct fc_disc *);
/**
- * fc_disc_lookup_rport - lookup a remote port by port_id
+ * fc_disc_lookup_rport() - lookup a remote port by port_id
* @lport: Fibre Channel host port instance
* @port_id: remote port port_id to match
*/
@@ -92,7 +92,7 @@
}
/**
- * fc_disc_stop_rports - delete all the remote ports associated with the lport
+ * fc_disc_stop_rports() - delete all the remote ports associated with the lport
* @disc: The discovery job to stop rports on
*
* Locking Note: This function expects that the lport mutex is locked before
@@ -117,7 +117,7 @@
}
/**
- * fc_disc_rport_callback - Event handler for rport events
+ * fc_disc_rport_callback() - Event handler for rport events
* @lport: The lport which is receiving the event
* @rport: The rport which the event has occured on
* @event: The event that occured
@@ -151,7 +151,7 @@
}
/**
- * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN)
+ * fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN)
* @sp: Current sequence of the RSCN exchange
* @fp: RSCN Frame
* @lport: Fibre Channel host port instance
@@ -246,7 +246,7 @@
list_del(&dp->peers);
rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
if (rport) {
- rdata = RPORT_TO_PRIV(rport);
+ rdata = rport->dd_data;
list_del(&rdata->peers);
lport->tt.rport_logoff(rport);
}
@@ -265,7 +265,7 @@
}
/**
- * fc_disc_recv_req - Handle incoming requests
+ * fc_disc_recv_req() - Handle incoming requests
* @sp: Current sequence of the request exchange
* @fp: The frame
* @lport: The FC local port
@@ -294,7 +294,7 @@
}
/**
- * fc_disc_restart - Restart discovery
+ * fc_disc_restart() - Restart discovery
* @lport: FC discovery context
*
* Locking Note: This function expects that the disc mutex
@@ -322,7 +322,7 @@
}
/**
- * fc_disc_start - Fibre Channel Target discovery
+ * fc_disc_start() - Fibre Channel Target discovery
* @lport: FC local port
*
* Returns non-zero if discovery cannot be started.
@@ -383,7 +383,7 @@
};
/**
- * fc_disc_new_target - Handle new target found by discovery
+ * fc_disc_new_target() - Handle new target found by discovery
* @lport: FC local port
* @rport: The previous FC remote port (NULL if new remote port)
* @ids: Identifiers for the new FC remote port
@@ -396,7 +396,7 @@
struct fc_rport_identifiers *ids)
{
struct fc_lport *lport = disc->lport;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rdata;
int error = 0;
if (rport && ids->port_name) {
@@ -430,15 +430,15 @@
dp.ids.port_name = ids->port_name;
dp.ids.node_name = ids->node_name;
dp.ids.roles = ids->roles;
- rport = fc_rport_rogue_create(&dp);
+ rport = lport->tt.rport_create(&dp);
}
if (!rport)
error = -ENOMEM;
}
if (rport) {
- rp = rport->dd_data;
- rp->ops = &fc_disc_rport_ops;
- rp->rp_state = RPORT_ST_INIT;
+ rdata = rport->dd_data;
+ rdata->ops = &fc_disc_rport_ops;
+ rdata->rp_state = RPORT_ST_INIT;
lport->tt.rport_login(rport);
}
}
@@ -446,20 +446,20 @@
}
/**
- * fc_disc_del_target - Delete a target
+ * fc_disc_del_target() - Delete a target
* @disc: FC discovery context
* @rport: The remote port to be removed
*/
static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport)
{
struct fc_lport *lport = disc->lport;
- struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport);
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
list_del(&rdata->peers);
lport->tt.rport_logoff(rport);
}
/**
- * fc_disc_done - Discovery has been completed
+ * fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
*/
static void fc_disc_done(struct fc_disc *disc)
@@ -479,7 +479,7 @@
}
/**
- * fc_disc_error - Handle error on dNS request
+ * fc_disc_error() - Handle error on dNS request
* @disc: FC discovery context
* @fp: The frame pointer
*/
@@ -519,7 +519,7 @@
}
/**
- * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request
+ * fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request
* @lport: FC discovery context
*
* Locking Note: This function expects that the disc_mutex is locked
@@ -553,7 +553,7 @@
}
/**
- * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request
+ * fc_disc_gpn_ft_parse() - Parse the list of IDs and names resulting from a request
* @lport: Fibre Channel host port instance
* @buf: GPN_FT response buffer
* @len: size of response buffer
@@ -617,7 +617,7 @@
if ((dp.ids.port_id != fc_host_port_id(lport->host)) &&
(dp.ids.port_name != lport->wwpn)) {
- rport = fc_rport_rogue_create(&dp);
+ rport = lport->tt.rport_create(&dp);
if (rport) {
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
@@ -658,7 +658,10 @@
return error;
}
-/*
+/**
+ * fc_disc_timeout() - Retry handler for the disc component
+ * @work: Structure holding disc obj that needs retry discovery
+ *
* Handle retry of memory allocation for remote ports.
*/
static void fc_disc_timeout(struct work_struct *work)
@@ -673,7 +676,7 @@
}
/**
- * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT)
+ * fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT)
* @sp: Current sequence of GPN_FT exchange
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
@@ -712,9 +715,7 @@
fr_len(fp));
} else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {
- /*
- * Accepted. Parse response.
- */
+ /* Accepted, parse the response. */
buf = cp + 1;
len -= sizeof(*cp);
} else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {
@@ -746,7 +747,7 @@
}
/**
- * fc_disc_single - Discover the directory information for a single target
+ * fc_disc_single() - Discover the directory information for a single target
* @lport: FC local port
* @dp: The port to rediscover
*
@@ -769,7 +770,7 @@
if (rport)
fc_disc_del_target(disc, rport);
- new_rport = fc_rport_rogue_create(dp);
+ new_rport = lport->tt.rport_create(dp);
if (new_rport) {
rdata = new_rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
@@ -782,7 +783,7 @@
}
/**
- * fc_disc_stop - Stop discovery for a given lport
+ * fc_disc_stop() - Stop discovery for a given lport
* @lport: The lport that discovery should stop for
*/
void fc_disc_stop(struct fc_lport *lport)
@@ -796,7 +797,7 @@
}
/**
- * fc_disc_stop_final - Stop discovery for a given lport
+ * fc_disc_stop_final() - Stop discovery for a given lport
* @lport: The lport that discovery should stop for
*
* This function will block until discovery has been
@@ -809,7 +810,7 @@
}
/**
- * fc_disc_init - Initialize the discovery block
+ * fc_disc_init() - Initialize the discovery block
* @lport: FC local port
*/
int fc_disc_init(struct fc_lport *lport)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 66db08a..505825b 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -32,8 +32,6 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */
-
/*
* fc_exch_debug can be set in debugger or at compile time to get more logs.
*/
@@ -627,7 +625,6 @@
{
struct fc_exch *ep;
struct fc_frame_header *fh;
- u16 rxid;
ep = mp->lp->tt.exch_get(mp->lp, fp);
if (ep) {
@@ -654,18 +651,6 @@
if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0)
ep->esb_stat &= ~ESB_ST_SEQ_INIT;
- /*
- * Set the responder ID in the frame header.
- * The old one should've been 0xffff.
- * If it isn't, don't assign one.
- * Incoming basic link service frames may specify
- * a referenced RX_ID.
- */
- if (fh->fh_type != FC_TYPE_BLS) {
- rxid = ntohs(fh->fh_rx_id);
- WARN_ON(rxid != FC_XID_UNKNOWN);
- fh->fh_rx_id = htons(ep->rxid);
- }
fc_exch_hold(ep); /* hold for caller */
spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */
}
@@ -677,8 +662,8 @@
* If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold
* on the ep that should be released by the caller.
*/
-static enum fc_pf_rjt_reason
-fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp)
+static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp,
+ struct fc_frame *fp)
{
struct fc_frame_header *fh = fc_frame_header_get(fp);
struct fc_exch *ep = NULL;
@@ -996,9 +981,9 @@
* Send BLS Reject.
* This is for rejecting BA_ABTS only.
*/
-static void
-fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason,
- enum fc_ba_rjt_explan explan)
+static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp,
+ enum fc_ba_rjt_reason reason,
+ enum fc_ba_rjt_explan explan)
{
struct fc_frame *fp;
struct fc_frame_header *rx_fh;
@@ -1096,7 +1081,7 @@
ap->ba_high_seq_cnt = fh->fh_seq_cnt;
ap->ba_low_seq_cnt = htons(sp->cnt);
}
- sp = fc_seq_start_next(sp);
+ sp = fc_seq_start_next_locked(sp);
spin_unlock_bh(&ep->ex_lock);
fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS);
fc_frame_free(rx_fp);
@@ -1480,10 +1465,11 @@
* If sid is non-zero, reset only exchanges we source from that FID.
* If did is non-zero, reset only exchanges destined to that FID.
*/
-void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did)
+void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
{
struct fc_exch *ep;
struct fc_exch *next;
+ struct fc_exch_mgr *mp = lp->emp;
spin_lock_bh(&mp->em_lock);
restart:
@@ -1607,7 +1593,7 @@
if (IS_ERR(fp)) {
int err = PTR_ERR(fp);
- if (err == -FC_EX_CLOSED)
+ if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT)
goto cleanup;
FC_DBG("Cannot process RRQ, because of frame error %d\n", err);
return;
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 404e63f..2a631d7 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -161,7 +161,7 @@
}
/**
- * fc_fcp_pkt_release - release hold on scsi_pkt packet
+ * fc_fcp_pkt_release() - release hold on scsi_pkt packet
* @fsp: fcp packet struct
*
* This is used by upper layer scsi driver.
@@ -183,8 +183,7 @@
}
/**
- * fc_fcp_pkt_destory - release hold on scsi_pkt packet
- *
+ * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
* @seq: exchange sequence
* @fsp: fcp packet struct
*
@@ -199,7 +198,7 @@
}
/**
- * fc_fcp_lock_pkt - lock a packet and get a ref to it.
+ * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
* @fsp: fcp packet
*
* We should only return error if we return a command to scsi-ml before
@@ -291,9 +290,7 @@
buf = fc_frame_payload_get(fp, 0);
if (offset + len > fsp->data_len) {
- /*
- * this should never happen
- */
+ /* this should never happen */
if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
fc_frame_crc_check(fp))
goto crc_err;
@@ -387,8 +384,8 @@
fc_fcp_complete_locked(fsp);
}
-/*
- * fc_fcp_send_data - Send SCSI data to target.
+/**
+ * fc_fcp_send_data() - Send SCSI data to target.
* @fsp: ptr to fc_fcp_pkt
* @sp: ptr to this sequence
* @offset: starting offset for this data request
@@ -610,8 +607,8 @@
}
}
-/*
- * fc_fcp_reduce_can_queue - drop can_queue
+/**
+ * fc_fcp_reduce_can_queue() - drop can_queue
* @lp: lport to drop queueing for
*
* If we are getting memory allocation failures, then we may
@@ -642,9 +639,11 @@
spin_unlock_irqrestore(lp->host->host_lock, flags);
}
-/*
- * exch mgr calls this routine to process scsi
- * exchanges.
+/**
+ * fc_fcp_recv() - Reveive FCP frames
+ * @seq: The sequence the frame is on
+ * @fp: The FC frame
+ * @arg: The related FCP packet
*
* Return : None
* Context : called from Soft IRQ context
@@ -832,7 +831,7 @@
}
/**
- * fc_fcp_complete_locked - complete processing of a fcp packet
+ * fc_fcp_complete_locked() - complete processing of a fcp packet
* @fsp: fcp packet
*
* This function may sleep if a timer is pending. The packet lock must be
@@ -900,7 +899,7 @@
}
/**
- * fc_fcp_cleanup_each_cmd - run fn on each active command
+ * fc_fcp_cleanup_each_cmd() - Cleanup active commads
* @lp: logical port
* @id: target id
* @lun: lun
@@ -952,7 +951,7 @@
}
/**
- * fc_fcp_pkt_send - send a fcp packet to the lower level.
+ * fc_fcp_pkt_send() - send a fcp packet to the lower level.
* @lp: fc lport
* @fsp: fc packet.
*
@@ -1621,7 +1620,7 @@
static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
{
/* lock ? */
- return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP);
+ return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
}
/**
@@ -1727,7 +1726,7 @@
EXPORT_SYMBOL(fc_queuecommand);
/**
- * fc_io_compl - Handle responses for completed commands
+ * fc_io_compl() - Handle responses for completed commands
* @fsp: scsi packet
*
* Translates a error to a Linux SCSI error.
@@ -1810,12 +1809,12 @@
sc_cmd->result = DID_ERROR << 16;
break;
case FC_DATA_UNDRUN:
- if (fsp->cdb_status == 0) {
+ if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
/*
* scsi status is good but transport level
- * underrun. for read it should be an error??
+ * underrun.
*/
- sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
+ sc_cmd->result = DID_OK << 16;
} else {
/*
* scsi got underrun, this is an error
@@ -1857,7 +1856,7 @@
}
/**
- * fc_fcp_complete - complete processing of a fcp packet
+ * fc_fcp_complete() - complete processing of a fcp packet
* @fsp: fcp packet
*
* This function may sleep if a fsp timer is pending.
@@ -1874,9 +1873,10 @@
EXPORT_SYMBOL(fc_fcp_complete);
/**
- * fc_eh_abort - Abort a command...from scsi host template
+ * fc_eh_abort() - Abort a command
* @sc_cmd: scsi command to abort
*
+ * From scsi host template.
* send ABTS to the target device and wait for the response
* sc_cmd is the pointer to the command to be aborted.
*/
@@ -1890,7 +1890,7 @@
lp = shost_priv(sc_cmd->device->host);
if (lp->state != LPORT_ST_READY)
return rc;
- else if (!(lp->link_status & FC_LINK_UP))
+ else if (!lp->link_up)
return rc;
spin_lock_irqsave(lp->host->host_lock, flags);
@@ -1920,7 +1920,7 @@
EXPORT_SYMBOL(fc_eh_abort);
/**
- * fc_eh_device_reset: Reset a single LUN
+ * fc_eh_device_reset() Reset a single LUN
* @sc_cmd: scsi command
*
* Set from scsi host template to send tm cmd to the target and wait for the
@@ -1973,7 +1973,7 @@
EXPORT_SYMBOL(fc_eh_device_reset);
/**
- * fc_eh_host_reset - The reset function will reset the ports on the host.
+ * fc_eh_host_reset() - The reset function will reset the ports on the host.
* @sc_cmd: scsi command
*/
int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
@@ -1999,7 +1999,7 @@
EXPORT_SYMBOL(fc_eh_host_reset);
/**
- * fc_slave_alloc - configure queue depth
+ * fc_slave_alloc() - configure queue depth
* @sdev: scsi device
*
* Configures queue depth based on host's cmd_per_len. If not set
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 0b9bdb1..2ae50a1 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -139,7 +139,7 @@
}
/**
- * fc_lport_rport_callback - Event handler for rport events
+ * fc_lport_rport_callback() - Event handler for rport events
* @lport: The lport which is receiving the event
* @rport: The rport which the event has occured on
* @event: The event that occured
@@ -195,7 +195,7 @@
}
/**
- * fc_lport_state - Return a string which represents the lport's state
+ * fc_lport_state() - Return a string which represents the lport's state
* @lport: The lport whose state is to converted to a string
*/
static const char *fc_lport_state(struct fc_lport *lport)
@@ -209,7 +209,7 @@
}
/**
- * fc_lport_ptp_setup - Create an rport for point-to-point mode
+ * fc_lport_ptp_setup() - Create an rport for point-to-point mode
* @lport: The lport to attach the ptp rport to
* @fid: The FID of the ptp rport
* @remote_wwpn: The WWPN of the ptp rport
@@ -232,7 +232,7 @@
lport->ptp_rp = NULL;
}
- lport->ptp_rp = fc_rport_rogue_create(&dp);
+ lport->ptp_rp = lport->tt.rport_create(&dp);
lport->tt.rport_login(lport->ptp_rp);
@@ -250,7 +250,7 @@
{
struct fc_lport *lp = shost_priv(shost);
- if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP)
+ if (lp->link_up)
fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
else
fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
@@ -351,7 +351,7 @@
}
/**
- * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report.
+ * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
* @lport: Fibre Channel local port recieving the RLIR
* @sp: current sequence in the RLIR exchange
* @fp: RLIR request frame
@@ -370,7 +370,7 @@
}
/**
- * fc_lport_recv_echo_req - Handle received ECHO request
+ * fc_lport_recv_echo_req() - Handle received ECHO request
* @lport: Fibre Channel local port recieving the ECHO
* @sp: current sequence in the ECHO exchange
* @fp: ECHO request frame
@@ -412,7 +412,7 @@
}
/**
- * fc_lport_recv_echo_req - Handle received Request Node ID data request
+ * fc_lport_recv_echo_req() - Handle received Request Node ID data request
* @lport: Fibre Channel local port recieving the RNID
* @sp: current sequence in the RNID exchange
* @fp: RNID request frame
@@ -479,7 +479,7 @@
}
/**
- * fc_lport_recv_adisc_req - Handle received Address Discovery Request
+ * fc_lport_recv_adisc_req() - Handle received Address Discovery Request
* @lport: Fibre Channel local port recieving the ADISC
* @sp: current sequence in the ADISC exchange
* @fp: ADISC request frame
@@ -529,7 +529,7 @@
}
/**
- * fc_lport_recv_logo_req - Handle received fabric LOGO request
+ * fc_lport_recv_logo_req() - Handle received fabric LOGO request
* @lport: Fibre Channel local port recieving the LOGO
* @sp: current sequence in the LOGO exchange
* @fp: LOGO request frame
@@ -546,7 +546,7 @@
}
/**
- * fc_fabric_login - Start the lport state machine
+ * fc_fabric_login() - Start the lport state machine
* @lport: The lport that should log into the fabric
*
* Locking Note: This function should not be called
@@ -568,7 +568,7 @@
EXPORT_SYMBOL(fc_fabric_login);
/**
- * fc_linkup - Handler for transport linkup events
+ * fc_linkup() - Handler for transport linkup events
* @lport: The lport whose link is up
*/
void fc_linkup(struct fc_lport *lport)
@@ -577,8 +577,8 @@
fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
- if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) {
- lport->link_status |= FC_LINK_UP;
+ if (!lport->link_up) {
+ lport->link_up = 1;
if (lport->state == LPORT_ST_RESET)
fc_lport_enter_flogi(lport);
@@ -588,7 +588,7 @@
EXPORT_SYMBOL(fc_linkup);
/**
- * fc_linkdown - Handler for transport linkdown events
+ * fc_linkdown() - Handler for transport linkdown events
* @lport: The lport whose link is down
*/
void fc_linkdown(struct fc_lport *lport)
@@ -597,8 +597,8 @@
FC_DEBUG_LPORT("Link is down for port (%6x)\n",
fc_host_port_id(lport->host));
- if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) {
- lport->link_status &= ~(FC_LINK_UP);
+ if (lport->link_up) {
+ lport->link_up = 0;
fc_lport_enter_reset(lport);
lport->tt.fcp_cleanup(lport);
}
@@ -607,48 +607,25 @@
EXPORT_SYMBOL(fc_linkdown);
/**
- * fc_pause - Pause the flow of frames
- * @lport: The lport to be paused
- */
-void fc_pause(struct fc_lport *lport)
-{
- mutex_lock(&lport->lp_mutex);
- lport->link_status |= FC_PAUSE;
- mutex_unlock(&lport->lp_mutex);
-}
-EXPORT_SYMBOL(fc_pause);
-
-/**
- * fc_unpause - Unpause the flow of frames
- * @lport: The lport to be unpaused
- */
-void fc_unpause(struct fc_lport *lport)
-{
- mutex_lock(&lport->lp_mutex);
- lport->link_status &= ~(FC_PAUSE);
- mutex_unlock(&lport->lp_mutex);
-}
-EXPORT_SYMBOL(fc_unpause);
-
-/**
- * fc_fabric_logoff - Logout of the fabric
+ * fc_fabric_logoff() - Logout of the fabric
* @lport: fc_lport pointer to logoff the fabric
*
* Return value:
* 0 for success, -1 for failure
- **/
+ */
int fc_fabric_logoff(struct fc_lport *lport)
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
fc_lport_enter_logo(lport);
mutex_unlock(&lport->lp_mutex);
+ cancel_delayed_work_sync(&lport->retry_work);
return 0;
}
EXPORT_SYMBOL(fc_fabric_logoff);
/**
- * fc_lport_destroy - unregister a fc_lport
+ * fc_lport_destroy() - unregister a fc_lport
* @lport: fc_lport pointer to unregister
*
* Return value:
@@ -658,26 +635,25 @@
* clean-up all the allocated memory
* and free up other system resources.
*
- **/
+ */
int fc_lport_destroy(struct fc_lport *lport)
{
lport->tt.frame_send = fc_frame_drop;
lport->tt.fcp_abort_io(lport);
- lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+ lport->tt.exch_mgr_reset(lport, 0, 0);
return 0;
}
EXPORT_SYMBOL(fc_lport_destroy);
/**
- * fc_set_mfs - sets up the mfs for the corresponding fc_lport
+ * fc_set_mfs() - sets up the mfs for the corresponding fc_lport
* @lport: fc_lport pointer to unregister
* @mfs: the new mfs for fc_lport
*
* Set mfs for the given fc_lport to the new mfs.
*
* Return: 0 for success
- *
- **/
+ */
int fc_set_mfs(struct fc_lport *lport, u32 mfs)
{
unsigned int old_mfs;
@@ -706,7 +682,7 @@
EXPORT_SYMBOL(fc_set_mfs);
/**
- * fc_lport_disc_callback - Callback for discovery events
+ * fc_lport_disc_callback() - Callback for discovery events
* @lport: FC local port
* @event: The discovery event
*/
@@ -731,7 +707,7 @@
}
/**
- * fc_rport_enter_ready - Enter the ready state and start discovery
+ * fc_rport_enter_ready() - Enter the ready state and start discovery
* @lport: Fibre Channel local port that is ready
*
* Locking Note: The lport lock is expected to be held before calling
@@ -748,7 +724,7 @@
}
/**
- * fc_lport_recv_flogi_req - Receive a FLOGI request
+ * fc_lport_recv_flogi_req() - Receive a FLOGI request
* @sp_in: The sequence the FLOGI is on
* @rx_fp: The frame the FLOGI is in
* @lport: The lport that recieved the request
@@ -838,7 +814,7 @@
}
/**
- * fc_lport_recv_req - The generic lport request handler
+ * fc_lport_recv_req() - The generic lport request handler
* @lport: The lport that received the request
* @sp: The sequence the request is on
* @fp: The frame the request is in
@@ -934,7 +910,7 @@
}
/**
- * fc_lport_reset - Reset an lport
+ * fc_lport_reset() - Reset an lport
* @lport: The lport which should be reset
*
* Locking Note: This functions should not be called with the
@@ -942,6 +918,7 @@
*/
int fc_lport_reset(struct fc_lport *lport)
{
+ cancel_delayed_work_sync(&lport->retry_work);
mutex_lock(&lport->lp_mutex);
fc_lport_enter_reset(lport);
mutex_unlock(&lport->lp_mutex);
@@ -950,7 +927,7 @@
EXPORT_SYMBOL(fc_lport_reset);
/**
- * fc_rport_enter_reset - Reset the local port
+ * fc_rport_enter_reset() - Reset the local port
* @lport: Fibre Channel local port to be reset
*
* Locking Note: The lport lock is expected to be held before calling
@@ -973,16 +950,16 @@
lport->tt.disc_stop(lport);
- lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+ lport->tt.exch_mgr_reset(lport, 0, 0);
fc_host_fabric_name(lport->host) = 0;
fc_host_port_id(lport->host) = 0;
- if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP)
+ if (lport->link_up)
fc_lport_enter_flogi(lport);
}
/**
- * fc_lport_error - Handler for any errors
+ * fc_lport_error() - Handler for any errors
* @lport: The fc_lport object
* @fp: The frame pointer
*
@@ -1029,8 +1006,8 @@
}
/**
- * fc_lport_rft_id_resp - Handle response to Register Fibre
- * Channel Types by ID (RPN_ID) request
+ * fc_lport_rft_id_resp() - Handle response to Register Fibre
+ * Channel Types by ID (RPN_ID) request
* @sp: current sequence in RPN_ID exchange
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
@@ -1053,17 +1030,17 @@
FC_DEBUG_LPORT("Received a RFT_ID response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_RFT_ID) {
FC_DBG("Received a RFT_ID response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
@@ -1081,8 +1058,8 @@
}
/**
- * fc_lport_rpn_id_resp - Handle response to Register Port
- * Name by ID (RPN_ID) request
+ * fc_lport_rpn_id_resp() - Handle response to Register Port
+ * Name by ID (RPN_ID) request
* @sp: current sequence in RPN_ID exchange
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
@@ -1105,17 +1082,17 @@
FC_DEBUG_LPORT("Received a RPN_ID response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_RPN_ID) {
FC_DBG("Received a RPN_ID response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
if (fh && ct && fh->fh_type == FC_TYPE_CT &&
@@ -1133,7 +1110,7 @@
}
/**
- * fc_lport_scr_resp - Handle response to State Change Register (SCR) request
+ * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request
* @sp: current sequence in SCR exchange
* @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the registration request
@@ -1155,17 +1132,17 @@
FC_DEBUG_LPORT("Received a SCR response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_SCR) {
FC_DBG("Received a SCR response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_ready(lport);
@@ -1179,7 +1156,7 @@
}
/**
- * fc_lport_enter_scr - Send a State Change Register (SCR) request
+ * fc_lport_enter_scr() - Send a State Change Register (SCR) request
* @lport: Fibre Channel local port to register for state changes
*
* Locking Note: The lport lock is expected to be held before calling
@@ -1206,7 +1183,7 @@
}
/**
- * fc_lport_enter_rft_id - Register FC4-types with the name server
+ * fc_lport_enter_rft_id() - Register FC4-types with the name server
* @lport: Fibre Channel local port to register
*
* Locking Note: The lport lock is expected to be held before calling
@@ -1248,7 +1225,7 @@
}
/**
- * fc_rport_enter_rft_id - Register port name with the name server
+ * fc_rport_enter_rft_id() - Register port name with the name server
* @lport: Fibre Channel local port to register
*
* Locking Note: The lport lock is expected to be held before calling
@@ -1281,7 +1258,7 @@
};
/**
- * fc_rport_enter_dns - Create a rport to the name server
+ * fc_rport_enter_dns() - Create a rport to the name server
* @lport: Fibre Channel local port requesting a rport for the name server
*
* Locking Note: The lport lock is expected to be held before calling
@@ -1304,7 +1281,7 @@
fc_lport_state_enter(lport, LPORT_ST_DNS);
- rport = fc_rport_rogue_create(&dp);
+ rport = lport->tt.rport_create(&dp);
if (!rport)
goto err;
@@ -1318,7 +1295,7 @@
}
/**
- * fc_lport_timeout - Handler for the retry_work timer.
+ * fc_lport_timeout() - Handler for the retry_work timer.
* @work: The work struct of the fc_lport
*/
static void fc_lport_timeout(struct work_struct *work)
@@ -1359,7 +1336,7 @@
}
/**
- * fc_lport_logo_resp - Handle response to LOGO request
+ * fc_lport_logo_resp() - Handle response to LOGO request
* @sp: current sequence in LOGO exchange
* @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the LOGO request
@@ -1381,17 +1358,17 @@
FC_DEBUG_LPORT("Received a LOGO response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_LOGO) {
FC_DBG("Received a LOGO response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_reset(lport);
@@ -1405,7 +1382,7 @@
}
/**
- * fc_rport_enter_logo - Logout of the fabric
+ * fc_rport_enter_logo() - Logout of the fabric
* @lport: Fibre Channel local port to be logged out
*
* Locking Note: The lport lock is expected to be held before calling
@@ -1437,7 +1414,7 @@
}
/**
- * fc_lport_flogi_resp - Handle response to FLOGI request
+ * fc_lport_flogi_resp() - Handle response to FLOGI request
* @sp: current sequence in FLOGI exchange
* @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the FLOGI request
@@ -1465,17 +1442,17 @@
FC_DEBUG_LPORT("Received a FLOGI response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_FLOGI) {
FC_DBG("Received a FLOGI response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
@@ -1532,7 +1509,7 @@
}
/**
- * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager
+ * fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager
* @lport: Fibre Channel local port to be logged in to the fabric
*
* Locking Note: The lport lock is expected to be held before calling
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index e780d8c..dae6513 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -81,6 +81,7 @@
struct fc_seq *, struct fc_frame *);
static void fc_rport_timeout(struct work_struct *);
static void fc_rport_error(struct fc_rport *, struct fc_frame *);
+static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *);
static void fc_rport_work(struct work_struct *);
static const char *fc_rport_state_names[] = {
@@ -145,7 +146,7 @@
}
/**
- * fc_rport_state - return a string for the state the rport is in
+ * fc_rport_state() - return a string for the state the rport is in
* @rport: The rport whose state we want to get a string for
*/
static const char *fc_rport_state(struct fc_rport *rport)
@@ -160,7 +161,7 @@
}
/**
- * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds.
+ * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds.
* @rport: Pointer to Fibre Channel remote port structure
* @timeout: timeout in seconds
*/
@@ -174,12 +175,12 @@
EXPORT_SYMBOL(fc_set_rport_loss_tmo);
/**
- * fc_plogi_get_maxframe - Get max payload from the common service parameters
+ * fc_plogi_get_maxframe() - Get max payload from the common service parameters
* @flp: FLOGI payload structure
* @maxval: upper limit, may be less than what is in the service parameters
*/
-static unsigned int
-fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval)
+static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
+ unsigned int maxval)
{
unsigned int mfs;
@@ -197,7 +198,7 @@
}
/**
- * fc_rport_state_enter - Change the rport's state
+ * fc_rport_state_enter() - Change the rport's state
* @rport: The rport whose state should change
* @new: The new state of the rport
*
@@ -214,6 +215,7 @@
static void fc_rport_work(struct work_struct *work)
{
+ u32 port_id;
struct fc_rport_libfc_priv *rdata =
container_of(work, struct fc_rport_libfc_priv, event_work);
enum fc_rport_event event;
@@ -279,14 +281,18 @@
rport_ops->event_callback(lport, rport, event);
if (trans_state == FC_PORTSTATE_ROGUE)
put_device(&rport->dev);
- else
+ else {
+ port_id = rport->port_id;
fc_remote_port_delete(rport);
+ lport->tt.exch_mgr_reset(lport, 0, port_id);
+ lport->tt.exch_mgr_reset(lport, port_id, 0);
+ }
} else
mutex_unlock(&rdata->rp_mutex);
}
/**
- * fc_rport_login - Start the remote port login state machine
+ * fc_rport_login() - Start the remote port login state machine
* @rport: Fibre Channel remote port
*
* Locking Note: Called without the rport lock held. This
@@ -309,7 +315,7 @@
}
/**
- * fc_rport_logoff - Logoff and remove an rport
+ * fc_rport_logoff() - Logoff and remove an rport
* @rport: Fibre Channel remote port to be removed
*
* Locking Note: Called without the rport lock held. This
@@ -347,7 +353,7 @@
}
/**
- * fc_rport_enter_ready - The rport is ready
+ * fc_rport_enter_ready() - The rport is ready
* @rport: Fibre Channel remote port that is ready
*
* Locking Note: The rport lock is expected to be held before calling
@@ -366,7 +372,7 @@
}
/**
- * fc_rport_timeout - Handler for the retry_work timer.
+ * fc_rport_timeout() - Handler for the retry_work timer.
* @work: The work struct of the fc_rport_libfc_priv
*
* Locking Note: Called without the rport lock held. This
@@ -405,59 +411,75 @@
}
/**
- * fc_rport_error - Handler for any errors
+ * fc_rport_error() - Error handler, called once retries have been exhausted
* @rport: The fc_rport object
* @fp: The frame pointer
*
- * If the error was caused by a resource allocation failure
- * then wait for half a second and retry, otherwise retry
- * immediately.
- *
* Locking Note: The rport lock is expected to be held before
* calling this routine
*/
static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
- unsigned long delay = 0;
FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
- if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
- /*
- * Memory allocation failure, or the exchange timed out.
- * Retry after delay
- */
- if (rdata->retries < rdata->local_port->max_retry_count) {
- rdata->retries++;
- if (!fp)
- delay = msecs_to_jiffies(500);
- get_device(&rport->dev);
- schedule_delayed_work(&rdata->retry_work, delay);
- } else {
- switch (rdata->rp_state) {
- case RPORT_ST_PLOGI:
- case RPORT_ST_PRLI:
- case RPORT_ST_LOGO:
- rdata->event = RPORT_EV_FAILED;
- queue_work(rport_event_queue,
- &rdata->event_work);
- break;
- case RPORT_ST_RTV:
- fc_rport_enter_ready(rport);
- break;
- case RPORT_ST_NONE:
- case RPORT_ST_READY:
- case RPORT_ST_INIT:
- break;
- }
- }
+ switch (rdata->rp_state) {
+ case RPORT_ST_PLOGI:
+ case RPORT_ST_PRLI:
+ case RPORT_ST_LOGO:
+ rdata->event = RPORT_EV_FAILED;
+ queue_work(rport_event_queue,
+ &rdata->event_work);
+ break;
+ case RPORT_ST_RTV:
+ fc_rport_enter_ready(rport);
+ break;
+ case RPORT_ST_NONE:
+ case RPORT_ST_READY:
+ case RPORT_ST_INIT:
+ break;
}
}
/**
- * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response
+ * fc_rport_error_retry() - Error handler when retries are desired
+ * @rport: The fc_rport object
+ * @fp: The frame pointer
+ *
+ * If the error was an exchange timeout retry immediately,
+ * otherwise wait for E_D_TOV.
+ *
+ * Locking Note: The rport lock is expected to be held before
+ * calling this routine
+ */
+static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
+{
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ unsigned long delay = FC_DEF_E_D_TOV;
+
+ /* make sure this isn't an FC_EX_CLOSED error, never retry those */
+ if (PTR_ERR(fp) == -FC_EX_CLOSED)
+ return fc_rport_error(rport, fp);
+
+ if (rdata->retries < rdata->local_port->max_retry_count) {
+ FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
+ PTR_ERR(fp), fc_rport_state(rport));
+ rdata->retries++;
+ /* no additional delay on exchange timeouts */
+ if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
+ delay = 0;
+ get_device(&rport->dev);
+ schedule_delayed_work(&rdata->retry_work, delay);
+ return;
+ }
+
+ return fc_rport_error(rport, fp);
+}
+
+/**
+ * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response
* @sp: current sequence in the PLOGI exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
@@ -483,17 +505,17 @@
FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
rport->port_id);
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_DBG("Received a PLOGI response, but in state %s\n",
fc_rport_state(rport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
@@ -522,7 +544,7 @@
else
fc_rport_enter_prli(rport);
} else
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
out:
fc_frame_free(fp);
@@ -532,7 +554,7 @@
}
/**
- * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer
+ * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer
* @rport: Fibre Channel remote port to send PLOGI to
*
* Locking Note: The rport lock is expected to be held before calling
@@ -552,20 +574,20 @@
rport->maxframe_size = FC_MIN_MAX_PAYLOAD;
fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
rdata->e_d_tov = lport->e_d_tov;
if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI,
fc_rport_plogi_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_prli_resp - Process Login (PRLI) response handler
+ * fc_rport_prli_resp() - Process Login (PRLI) response handler
* @sp: current sequence in the PRLI exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
@@ -592,17 +614,17 @@
FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
rport->port_id);
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_DBG("Received a PRLI response, but in state %s\n",
fc_rport_state(rport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
@@ -635,7 +657,7 @@
}
/**
- * fc_rport_logo_resp - Logout (LOGO) response handler
+ * fc_rport_logo_resp() - Logout (LOGO) response handler
* @sp: current sequence in the LOGO exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
@@ -657,7 +679,7 @@
rport->port_id);
if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
goto err;
}
@@ -684,7 +706,7 @@
}
/**
- * fc_rport_enter_prli - Send Process Login (PRLI) request to peer
+ * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer
* @rport: Fibre Channel remote port to send PRLI to
*
* Locking Note: The rport lock is expected to be held before calling
@@ -707,19 +729,19 @@
fp = fc_frame_alloc(lport, sizeof(*pp));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI,
fc_rport_prli_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_els_rtv_resp - Request Timeout Value response handler
+ * fc_rport_els_rtv_resp() - Request Timeout Value response handler
* @sp: current sequence in the RTV exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
@@ -742,17 +764,17 @@
FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
rport->port_id);
+ if (IS_ERR(fp)) {
+ fc_rport_error(rport, fp);
+ goto err;
+ }
+
if (rdata->rp_state != RPORT_ST_RTV) {
FC_DBG("Received a RTV response, but in state %s\n",
fc_rport_state(rport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
@@ -785,7 +807,7 @@
}
/**
- * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer
+ * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer
* @rport: Fibre Channel remote port to send RTV to
*
* Locking Note: The rport lock is expected to be held before calling
@@ -804,19 +826,19 @@
fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV,
fc_rport_rtv_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_enter_logo - Send Logout (LOGO) request to peer
+ * fc_rport_enter_logo() - Send Logout (LOGO) request to peer
* @rport: Fibre Channel remote port to send LOGO to
*
* Locking Note: The rport lock is expected to be held before calling
@@ -835,20 +857,20 @@
fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO,
fc_rport_logo_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_recv_req - Receive a request from a rport
+ * fc_rport_recv_req() - Receive a request from a rport
* @sp: current sequence in the PLOGI exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
@@ -909,7 +931,7 @@
}
/**
- * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request
+ * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request
* @rport: Fibre Channel remote port that initiated PLOGI
* @sp: current sequence in the PLOGI exchange
* @fp: PLOGI request frame
@@ -1031,7 +1053,7 @@
}
/**
- * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request
+ * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request
* @rport: Fibre Channel remote port that initiated PRLI
* @sp: current sequence in the PRLI exchange
* @fp: PRLI request frame
@@ -1182,7 +1204,7 @@
}
/**
- * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request
+ * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request
* @rport: Fibre Channel remote port that initiated PRLO
* @sp: current sequence in the PRLO exchange
* @fp: PRLO request frame
@@ -1213,7 +1235,7 @@
}
/**
- * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request
+ * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request
* @rport: Fibre Channel remote port that initiated LOGO
* @sp: current sequence in the LOGO exchange
* @fp: LOGO request frame
@@ -1249,6 +1271,9 @@
int fc_rport_init(struct fc_lport *lport)
{
+ if (!lport->tt.rport_create)
+ lport->tt.rport_create = fc_rport_rogue_create;
+
if (!lport->tt.rport_login)
lport->tt.rport_login = fc_rport_login;
@@ -1285,7 +1310,7 @@
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id);
- lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0);
+ lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
+ lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
}
EXPORT_SYMBOL(fc_rport_terminate_io);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index f4c5722..ee9d401 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -244,12 +244,6 @@
if (ha->optrom_state != QLA_SWAITING)
break;
- if (start & 0xfff) {
- qla_printk(KERN_WARNING, ha,
- "Invalid start region 0x%x/0x%x.\n", start, size);
- return -EINVAL;
- }
-
ha->optrom_region_start = start;
ha->optrom_region_size = start + size > ha->optrom_size ?
ha->optrom_size - start : size;
@@ -303,8 +297,7 @@
else if (start == (ha->flt_region_boot * 4) ||
start == (ha->flt_region_fw * 4))
valid = 1;
- else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) &&
- start == (ha->flt_region_vpd_nvram * 4))
+ else if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
valid = 1;
if (!valid) {
qla_printk(KERN_WARNING, ha,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9865017..87f9abc 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1308,8 +1308,12 @@
DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no));
- if (ha->flags.npiv_supported)
+ if (ha->flags.npiv_supported) {
+ if (ha->operating_mode == LOOP)
+ ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+ }
+
mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
@@ -2610,6 +2614,7 @@
port_id_t wrap, nxt_d_id;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
+ struct scsi_qla_host *tvp;
rval = QLA_SUCCESS;
@@ -2709,7 +2714,7 @@
/* Bypass virtual ports of the same host. */
found = 0;
if (ha->num_vhosts) {
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
if (new_fcport->d_id.b24 == vp->d_id.b24) {
found = 1;
break;
@@ -2832,6 +2837,7 @@
uint16_t first_loop_id;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
+ struct scsi_qla_host *tvp;
rval = QLA_SUCCESS;
@@ -2856,7 +2862,7 @@
/* Check for loop ID being already in use. */
found = 0;
fcport = NULL;
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
list_for_each_entry(fcport, &vp->vp_fcports, list) {
if (fcport->loop_id == dev->loop_id &&
fcport != dev) {
@@ -3291,6 +3297,7 @@
uint8_t status = 0;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
+ struct scsi_qla_host *tvp;
struct req_que *req = ha->req_q_map[0];
if (vha->flags.online) {
@@ -3306,7 +3313,7 @@
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(vha, 0);
- list_for_each_entry(vp, &ha->vp_list, list)
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
qla2x00_mark_all_devices_lost(vp, 0);
} else {
if (!atomic_read(&vha->loop_down_timer))
@@ -3403,7 +3410,7 @@
DEBUG(printk(KERN_INFO
"qla2x00_abort_isp(%ld): succeeded.\n",
vha->host_no));
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
if (vp->vp_idx)
qla2x00_vp_abort_isp(vp);
}
@@ -3428,7 +3435,7 @@
static int
qla2x00_restart_isp(scsi_qla_host_t *vha)
{
- uint8_t status = 0;
+ int status = 0;
uint32_t wait_time;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4c7504c..4aab7ac 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2685,6 +2685,7 @@
uint16_t stat = le16_to_cpu(rptid_entry->vp_idx);
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *vp;
+ scsi_qla_host_t *tvp;
if (rptid_entry->entry_status != 0)
return;
@@ -2710,7 +2711,7 @@
if (MSB(stat) == 1)
return;
- list_for_each_entry(vp, &ha->vp_list, list)
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
if (vp_idx == vp->vp_idx)
break;
if (!vp)
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 3f23932..785c612 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -69,9 +69,10 @@
qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
{
scsi_qla_host_t *vha;
+ struct scsi_qla_host *tvha;
/* Locate matching device in database. */
- list_for_each_entry(vha, &ha->vp_list, list) {
+ list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
if (!memcmp(port_name, vha->port_name, WWN_SIZE))
return vha;
}
@@ -194,11 +195,11 @@
void
qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
{
- scsi_qla_host_t *vha;
+ scsi_qla_host_t *vha, *tvha;
struct qla_hw_data *ha = rsp->hw;
int i = 0;
- list_for_each_entry(vha, &ha->vp_list, list) {
+ list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
if (vha->vp_idx) {
switch (mb[0]) {
case MBA_LIP_OCCURRED:
@@ -300,6 +301,7 @@
int ret;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *vp;
+ struct scsi_qla_host *tvp;
if (vha->vp_idx)
return;
@@ -308,7 +310,7 @@
clear_bit(VP_DPC_NEEDED, &vha->dpc_flags);
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
if (vp->vp_idx)
ret = qla2x00_do_dpc_vp(vp);
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2f5f725..3ddfa88 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2222,10 +2222,6 @@
{
char name[16];
- ha->init_cb_size = sizeof(init_cb_t);
- if (IS_QLA2XXX_MIDTYPE(ha))
- ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
-
ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
&ha->init_cb_dma, GFP_KERNEL);
if (!ha->init_cb)
@@ -2568,7 +2564,7 @@
void qla2x00_relogin(struct scsi_qla_host *vha)
{
fc_port_t *fcport;
- uint8_t status;
+ int status;
uint16_t next_loopid = 0;
struct qla_hw_data *ha = vha->hw;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 79f7053..a772eab 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.00-k3"
+#define QLA2XXX_VERSION "8.03.00-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 55310db..4970ae4 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1167,23 +1167,19 @@
/*
* The device does not want the automatic start to be issued.
*/
- if (sdkp->device->no_start_on_add) {
+ if (sdkp->device->no_start_on_add)
break;
- }
- /*
- * If manual intervention is required, or this is an
- * absent USB storage device, a spinup is meaningless.
- */
- if (sense_valid &&
- sshdr.sense_key == NOT_READY &&
- sshdr.asc == 4 && sshdr.ascq == 3) {
- break; /* manual intervention required */
-
- /*
- * Issue command to spin up drive when not ready
- */
- } else if (sense_valid && sshdr.sense_key == NOT_READY) {
+ if (sense_valid && sshdr.sense_key == NOT_READY) {
+ if (sshdr.asc == 4 && sshdr.ascq == 3)
+ break; /* manual intervention required */
+ if (sshdr.asc == 4 && sshdr.ascq == 0xb)
+ break; /* standby */
+ if (sshdr.asc == 4 && sshdr.ascq == 0xc)
+ break; /* unavailable */
+ /*
+ * Issue command to spin up drive when not ready
+ */
if (!spintime) {
sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
cmd[0] = START_STOP;
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index a8d61a6..97f3158 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -137,7 +137,7 @@
goto fail;
if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
- dev_printk(KERN_ERR, dev, "irq problem with %d, detaching\n ",
+ dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
dev->irq);
goto fail;
}
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index f31c669..cb6d85d 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -14,8 +14,8 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/dec21285.h>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 7d7f576..9be11b0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -628,7 +628,7 @@
config SERIAL_PXA
bool "PXA serial port support"
- depends on ARM && ARCH_PXA
+ depends on ARCH_PXA || ARCH_MMP
select SERIAL_CORE
help
If you have a machine based on an Intel XScale PXA2xx CPU you
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 459f342..80e7642 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -38,9 +38,9 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/clps7111.h>
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index a509546..9f460b1 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1129,7 +1129,7 @@
sport->timer.function = imx_timeout;
sport->timer.data = (unsigned long)sport;
- sport->clk = clk_get(&pdev->dev, "uart_clk");
+ sport->clk = clk_get(&pdev->dev, "uart");
if (IS_ERR(sport->clk)) {
ret = PTR_ERR(sport->clk);
goto unmap;
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f6e3b86..a48a8a1 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -43,13 +43,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/regs-uart.h>
-
+#include <linux/io.h>
struct uart_pxa_port {
struct uart_port port;
@@ -491,7 +485,7 @@
* Ensure the port will be enabled.
* This is required especially for serial console.
*/
- up->ier |= IER_UUE;
+ up->ier |= UART_IER_UUE;
/*
* Update the per-port timeout.
@@ -784,19 +778,15 @@
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
sport->port.uartclk = clk_get_rate(sport->clk);
- /*
- * Is it worth keeping this?
- */
- if (mmres->start == __PREG(FFUART))
- sport->name = "FFUART";
- else if (mmres->start == __PREG(BTUART))
- sport->name = "BTUART";
- else if (mmres->start == __PREG(STUART))
- sport->name = "STUART";
- else if (mmres->start == __PREG(HWUART))
- sport->name = "HWUART";
- else
+ switch (dev->id) {
+ case 0: sport->name = "FFUART"; break;
+ case 1: sport->name = "BTUART"; break;
+ case 2: sport->name = "STUART"; break;
+ case 3: sport->name = "HWUART"; break;
+ default:
sport->name = "???";
+ break;
+ }
sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
if (!sport->port.membase) {
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index b24a25e..94530f0 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -36,8 +36,8 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/mach/serial_sa1100.h>
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 454a271..b91ee1a 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1021,13 +1021,13 @@
spin_lock_init(&mcspi->lock);
INIT_LIST_HEAD(&mcspi->msg_queue);
- mcspi->ick = clk_get(&pdev->dev, "mcspi_ick");
+ mcspi->ick = clk_get(&pdev->dev, "ick");
if (IS_ERR(mcspi->ick)) {
dev_dbg(&pdev->dev, "can't get mcspi_ick\n");
status = PTR_ERR(mcspi->ick);
goto err1a;
}
- mcspi->fck = clk_get(&pdev->dev, "mcspi_fck");
+ mcspi->fck = clk_get(&pdev->dev, "fck");
if (IS_ERR(mcspi->fck)) {
dev_dbg(&pdev->dev, "can't get mcspi_fck\n");
status = PTR_ERR(mcspi->fck);
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index bab6ff0..394b616 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -506,11 +506,12 @@
dev_set_drvdata(&pdev->dev, uwire);
- uwire->ck = clk_get(&pdev->dev, "armxor_ck");
- if (!uwire->ck || IS_ERR(uwire->ck)) {
- dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n");
+ uwire->ck = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(uwire->ck)) {
+ status = PTR_ERR(uwire->ck);
+ dev_dbg(&pdev->dev, "no functional clock?\n");
spi_master_put(master);
- return -ENODEV;
+ return status;
}
clk_enable(uwire->ck);
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index d0fc4ca..d22fac2 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -34,8 +34,6 @@
#include <asm/delay.h>
#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ssp.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index ce6badd..211af86 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -73,8 +73,6 @@
source "drivers/staging/rt2870/Kconfig"
-source "drivers/staging/benet/Kconfig"
-
source "drivers/staging/comedi/Kconfig"
source "drivers/staging/asus_oled/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 9ddcc2b..47a56f5 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -19,7 +19,6 @@
obj-$(CONFIG_OTUS) += otus/
obj-$(CONFIG_RT2860) += rt2860/
obj-$(CONFIG_RT2870) += rt2870/
-obj-$(CONFIG_BENET) += benet/
obj-$(CONFIG_COMEDI) += comedi/
obj-$(CONFIG_ASUS_OLED) += asus_oled/
obj-$(CONFIG_PANEL) += panel/
diff --git a/drivers/staging/benet/Kconfig b/drivers/staging/benet/Kconfig
deleted file mode 100644
index f680607..0000000
--- a/drivers/staging/benet/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config BENET
- tristate "ServerEngines 10Gb NIC - BladeEngine"
- depends on PCI && INET
- select INET_LRO
- help
- This driver implements the NIC functionality for ServerEngines
- 10Gb network adapter BladeEngine (EC 3210).
diff --git a/drivers/staging/benet/MAINTAINERS b/drivers/staging/benet/MAINTAINERS
deleted file mode 100644
index d5ce340..0000000
--- a/drivers/staging/benet/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SERVER ENGINES 10Gbe NIC - BLADE-ENGINE
-P: Subbu Seetharaman
-M: subbus@serverengines.com
-L: netdev@vger.kernel.org
-W: http://www.serverengines.com
-S: Supported
diff --git a/drivers/staging/benet/Makefile b/drivers/staging/benet/Makefile
deleted file mode 100644
index 460b923..0000000
--- a/drivers/staging/benet/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile to build the network driver for ServerEngine's BladeEngine
-#
-obj-$(CONFIG_BENET) += benet.o
-
-benet-y := be_init.o \
- be_int.o \
- be_netif.o \
- be_ethtool.o \
- funcobj.o \
- cq.o \
- eq.o \
- mpu.o \
- eth.o
diff --git a/drivers/staging/benet/TODO b/drivers/staging/benet/TODO
deleted file mode 100644
index a51dfb5..0000000
--- a/drivers/staging/benet/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-TODO:
- - remove wrappers around common iowrite functions
- - full netdev audit of common problems/issues
-
-Please send all patches and questions to Subbu Seetharaman
-<subbus@serverengines.com> and Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/staging/benet/asyncmesg.h b/drivers/staging/benet/asyncmesg.h
deleted file mode 100644
index d1e779a..0000000
--- a/drivers/staging/benet/asyncmesg.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __asyncmesg_amap_h__
-#define __asyncmesg_amap_h__
-#include "fwcmd_common.h"
-
-/* --- ASYNC_EVENT_CODES --- */
-#define ASYNC_EVENT_CODE_LINK_STATE (1)
-#define ASYNC_EVENT_CODE_ISCSI (2)
-
-/* --- ASYNC_LINK_STATES --- */
-#define ASYNC_EVENT_LINK_DOWN (0) /* Link Down on a port */
-#define ASYNC_EVENT_LINK_UP (1) /* Link Up on a port */
-
-/*
- * The last 4 bytes of the async events have this common format. It allows
- * the driver to distinguish [link]MCC_CQ_ENTRY[/link] structs from
- * asynchronous events. Both arrive on the same completion queue. This
- * structure also contains the common fields used to decode the async event.
- */
-struct BE_ASYNC_EVENT_TRAILER_AMAP {
- u8 rsvd0[8]; /* DWORD 0 */
- u8 event_code[8]; /* DWORD 0 */
- u8 event_type[8]; /* DWORD 0 */
- u8 rsvd1[6]; /* DWORD 0 */
- u8 async_event; /* DWORD 0 */
- u8 valid; /* DWORD 0 */
-} __packed;
-struct ASYNC_EVENT_TRAILER_AMAP {
- u32 dw[1];
-};
-
-/*
- * Applicable in Initiator, Target and NIC modes.
- * A link state async event is seen by all device drivers as soon they
- * create an MCC ring. Thereafter, anytime the link status changes the
- * drivers will receive a link state async event. Notifications continue to
- * be sent until a driver destroys its MCC ring. A link down event is
- * reported when either port loses link. A link up event is reported
- * when either port regains link. When BE's failover mechanism is enabled, a
- * link down on the active port causes traffic to be diverted to the standby
- * port by the BE's ARM firmware (assuming the standby port has link). In
- * this case, the standy port assumes the active status. Note: when link is
- * restored on the failed port, traffic continues on the currently active
- * port. The ARM firmware does not attempt to 'fail back' traffic to
- * the restored port.
- */
-struct BE_ASYNC_EVENT_LINK_STATE_AMAP {
- u8 port0_link_status[8];
- u8 port1_link_status[8];
- u8 active_port[8];
- u8 rsvd0[8]; /* DWORD 0 */
- u8 port0_duplex[8];
- u8 port0_speed[8];
- u8 port1_duplex[8];
- u8 port1_speed[8];
- u8 port0_fault[8];
- u8 port1_fault[8];
- u8 rsvd1[2][8]; /* DWORD 2 */
- struct BE_ASYNC_EVENT_TRAILER_AMAP trailer;
-} __packed;
-struct ASYNC_EVENT_LINK_STATE_AMAP {
- u32 dw[4];
-};
-#endif /* __asyncmesg_amap_h__ */
diff --git a/drivers/staging/benet/be_cm.h b/drivers/staging/benet/be_cm.h
deleted file mode 100644
index b7a1dfd..0000000
--- a/drivers/staging/benet/be_cm.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __be_cm_amap_h__
-#define __be_cm_amap_h__
-#include "be_common.h"
-#include "etx_context.h"
-#include "mpu_context.h"
-
-/*
- * --- CEV_WATERMARK_ENUM ---
- * CQ/EQ Watermark Encodings. Encoded as number of free entries in
- * Queue when Watermark is reached.
- */
-#define CEV_WMARK_0 (0) /* Watermark when Queue full */
-#define CEV_WMARK_16 (1) /* Watermark at 16 free entries */
-#define CEV_WMARK_32 (2) /* Watermark at 32 free entries */
-#define CEV_WMARK_48 (3) /* Watermark at 48 free entries */
-#define CEV_WMARK_64 (4) /* Watermark at 64 free entries */
-#define CEV_WMARK_80 (5) /* Watermark at 80 free entries */
-#define CEV_WMARK_96 (6) /* Watermark at 96 free entries */
-#define CEV_WMARK_112 (7) /* Watermark at 112 free entries */
-#define CEV_WMARK_128 (8) /* Watermark at 128 free entries */
-#define CEV_WMARK_144 (9) /* Watermark at 144 free entries */
-#define CEV_WMARK_160 (10) /* Watermark at 160 free entries */
-#define CEV_WMARK_176 (11) /* Watermark at 176 free entries */
-#define CEV_WMARK_192 (12) /* Watermark at 192 free entries */
-#define CEV_WMARK_208 (13) /* Watermark at 208 free entries */
-#define CEV_WMARK_224 (14) /* Watermark at 224 free entries */
-#define CEV_WMARK_240 (15) /* Watermark at 240 free entries */
-
-/*
- * --- CQ_CNT_ENUM ---
- * Completion Queue Count Encodings.
- */
-#define CEV_CQ_CNT_256 (0) /* CQ has 256 entries */
-#define CEV_CQ_CNT_512 (1) /* CQ has 512 entries */
-#define CEV_CQ_CNT_1024 (2) /* CQ has 1024 entries */
-
-/*
- * --- EQ_CNT_ENUM ---
- * Event Queue Count Encodings.
- */
-#define CEV_EQ_CNT_256 (0) /* EQ has 256 entries (16-byte EQEs only) */
-#define CEV_EQ_CNT_512 (1) /* EQ has 512 entries (16-byte EQEs only) */
-#define CEV_EQ_CNT_1024 (2) /* EQ has 1024 entries (4-byte or */
- /* 16-byte EQEs only) */
-#define CEV_EQ_CNT_2048 (3) /* EQ has 2048 entries (4-byte or */
- /* 16-byte EQEs only) */
-#define CEV_EQ_CNT_4096 (4) /* EQ has 4096 entries (4-byte EQEs only) */
-
-/*
- * --- EQ_SIZE_ENUM ---
- * Event Queue Entry Size Encoding.
- */
-#define CEV_EQ_SIZE_4 (0) /* EQE is 4 bytes */
-#define CEV_EQ_SIZE_16 (1) /* EQE is 16 bytes */
-
-/*
- * Completion Queue Context Table Entry. Contains the state of a CQ.
- * Located in RAM within the CEV block.
- */
-struct BE_CQ_CONTEXT_AMAP {
- u8 Cidx[11]; /* DWORD 0 */
- u8 Watermark[4]; /* DWORD 0 */
- u8 NoDelay; /* DWORD 0 */
- u8 EPIdx[11]; /* DWORD 0 */
- u8 Count[2]; /* DWORD 0 */
- u8 valid; /* DWORD 0 */
- u8 SolEvent; /* DWORD 0 */
- u8 Eventable; /* DWORD 0 */
- u8 Pidx[11]; /* DWORD 1 */
- u8 PD[10]; /* DWORD 1 */
- u8 EQID[7]; /* DWORD 1 */
- u8 Func; /* DWORD 1 */
- u8 WME; /* DWORD 1 */
- u8 Stalled; /* DWORD 1 */
- u8 Armed; /* DWORD 1 */
-} __packed;
-struct CQ_CONTEXT_AMAP {
- u32 dw[2];
-};
-
-/*
- * Event Queue Context Table Entry. Contains the state of an EQ.
- * Located in RAM in the CEV block.
- */
-struct BE_EQ_CONTEXT_AMAP {
- u8 Cidx[13]; /* DWORD 0 */
- u8 rsvd0[2]; /* DWORD 0 */
- u8 Func; /* DWORD 0 */
- u8 EPIdx[13]; /* DWORD 0 */
- u8 valid; /* DWORD 0 */
- u8 rsvd1; /* DWORD 0 */
- u8 Size; /* DWORD 0 */
- u8 Pidx[13]; /* DWORD 1 */
- u8 rsvd2[3]; /* DWORD 1 */
- u8 PD[10]; /* DWORD 1 */
- u8 Count[3]; /* DWORD 1 */
- u8 SolEvent; /* DWORD 1 */
- u8 Stalled; /* DWORD 1 */
- u8 Armed; /* DWORD 1 */
- u8 Watermark[4]; /* DWORD 2 */
- u8 WME; /* DWORD 2 */
- u8 rsvd3[3]; /* DWORD 2 */
- u8 EventVect[6]; /* DWORD 2 */
- u8 rsvd4[2]; /* DWORD 2 */
- u8 Delay[8]; /* DWORD 2 */
- u8 rsvd5[6]; /* DWORD 2 */
- u8 TMR; /* DWORD 2 */
- u8 rsvd6; /* DWORD 2 */
- u8 rsvd7[32]; /* DWORD 3 */
-} __packed;
-struct EQ_CONTEXT_AMAP {
- u32 dw[4];
-};
-
-#endif /* __be_cm_amap_h__ */
diff --git a/drivers/staging/benet/be_common.h b/drivers/staging/benet/be_common.h
deleted file mode 100644
index 7e63dc5..0000000
--- a/drivers/staging/benet/be_common.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __be_common_amap_h__
-#define __be_common_amap_h__
-
-/* Physical Address. */
-struct BE_PHYS_ADDR_AMAP {
- u8 lo[32]; /* DWORD 0 */
- u8 hi[32]; /* DWORD 1 */
-} __packed;
-struct PHYS_ADDR_AMAP {
- u32 dw[2];
-};
-
-/* Virtual Address. */
-struct BE_VIRT_ADDR_AMAP {
- u8 lo[32]; /* DWORD 0 */
- u8 hi[32]; /* DWORD 1 */
-} __packed;
-struct VIRT_ADDR_AMAP {
- u32 dw[2];
-};
-
-/* Scatter gather element. */
-struct BE_SGE_AMAP {
- u8 addr_hi[32]; /* DWORD 0 */
- u8 addr_lo[32]; /* DWORD 1 */
- u8 rsvd0[32]; /* DWORD 2 */
- u8 len[16]; /* DWORD 3 */
- u8 rsvd1[16]; /* DWORD 3 */
-} __packed;
-struct SGE_AMAP {
- u32 dw[4];
-};
-
-#endif /* __be_common_amap_h__ */
diff --git a/drivers/staging/benet/be_ethtool.c b/drivers/staging/benet/be_ethtool.c
deleted file mode 100644
index 027af85..0000000
--- a/drivers/staging/benet/be_ethtool.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * be_ethtool.c
- *
- * This file contains various functions that ethtool can use
- * to talk to the driver and the BE H/W.
- */
-
-#include "benet.h"
-
-#include <linux/ethtool.h>
-
-static const char benet_gstrings_stats[][ETH_GSTRING_LEN] = {
-/* net_device_stats */
- "rx_packets",
- "tx_packets",
- "rx_bytes",
- "tx_bytes",
- "rx_errors",
- "tx_errors",
- "rx_dropped",
- "tx_dropped",
- "multicast",
- "collisions",
- "rx_length_errors",
- "rx_over_errors",
- "rx_crc_errors",
- "rx_frame_errors",
- "rx_fifo_errors",
- "rx_missed_errors",
- "tx_aborted_errors",
- "tx_carrier_errors",
- "tx_fifo_errors",
- "tx_heartbeat_errors",
- "tx_window_errors",
- "rx_compressed",
- "tc_compressed",
-/* BE driver Stats */
- "bes_tx_reqs",
- "bes_tx_fails",
- "bes_fwd_reqs",
- "bes_tx_wrbs",
- "bes_interrupts",
- "bes_events",
- "bes_tx_events",
- "bes_rx_events",
- "bes_tx_compl",
- "bes_rx_compl",
- "bes_ethrx_post_fail",
- "bes_802_3_dropped_frames",
- "bes_802_3_malformed_frames",
- "bes_rx_misc_pkts",
- "bes_eth_tx_rate",
- "bes_eth_rx_rate",
- "Num Packets collected",
- "Num Times Flushed",
-};
-
-#define NET_DEV_STATS_LEN \
- (sizeof(struct net_device_stats)/sizeof(unsigned long))
-
-#define BENET_STATS_LEN ARRAY_SIZE(benet_gstrings_stats)
-
-static void
-be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
-
- strncpy(drvinfo->driver, be_driver_name, 32);
- strncpy(drvinfo->version, be_drvr_ver, 32);
- strncpy(drvinfo->fw_version, be_fw_ver, 32);
- strcpy(drvinfo->bus_info, pci_name(adapter->pdev));
- drvinfo->testinfo_len = 0;
- drvinfo->regdump_len = 0;
- drvinfo->eedump_len = 0;
-}
-
-static int
-be_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
-
- coalesce->rx_max_coalesced_frames = adapter->max_rx_coal;
-
- coalesce->rx_coalesce_usecs = adapter->cur_eqd;
- coalesce->rx_coalesce_usecs_high = adapter->max_eqd;
- coalesce->rx_coalesce_usecs_low = adapter->min_eqd;
-
- coalesce->tx_coalesce_usecs = adapter->cur_eqd;
- coalesce->tx_coalesce_usecs_high = adapter->max_eqd;
- coalesce->tx_coalesce_usecs_low = adapter->min_eqd;
-
- coalesce->use_adaptive_rx_coalesce = adapter->enable_aic;
- coalesce->use_adaptive_tx_coalesce = adapter->enable_aic;
-
- return 0;
-}
-
-/*
- * This routine is used to set interrup coalescing delay *as well as*
- * the number of pkts to coalesce for LRO.
- */
-static int
-be_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coalesce)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
- struct be_eq_object *eq_objectp;
- u32 max, min, cur;
- int status;
-
- adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
- if (adapter->max_rx_coal >= BE_LRO_MAX_PKTS)
- adapter->max_rx_coal = BE_LRO_MAX_PKTS;
-
- if (adapter->enable_aic == 0 &&
- coalesce->use_adaptive_rx_coalesce == 1) {
- /* if AIC is being turned on now, start with an EQD of 0 */
- adapter->cur_eqd = 0;
- }
- adapter->enable_aic = coalesce->use_adaptive_rx_coalesce;
-
- /* round off to nearest multiple of 8 */
- max = (((coalesce->rx_coalesce_usecs_high + 4) >> 3) << 3);
- min = (((coalesce->rx_coalesce_usecs_low + 4) >> 3) << 3);
- cur = (((coalesce->rx_coalesce_usecs + 4) >> 3) << 3);
-
- if (adapter->enable_aic) {
- /* accept low and high if AIC is enabled */
- if (max > MAX_EQD)
- max = MAX_EQD;
- if (min > max)
- min = max;
- adapter->max_eqd = max;
- adapter->min_eqd = min;
- if (adapter->cur_eqd > max)
- adapter->cur_eqd = max;
- if (adapter->cur_eqd < min)
- adapter->cur_eqd = min;
- } else {
- /* accept specified coalesce_usecs only if AIC is disabled */
- if (cur > MAX_EQD)
- cur = MAX_EQD;
- eq_objectp = &pnob->event_q_obj;
- status =
- be_eq_modify_delay(&pnob->fn_obj, 1, &eq_objectp, &cur,
- NULL, NULL, NULL);
- if (status == BE_SUCCESS)
- adapter->cur_eqd = cur;
- }
- return 0;
-}
-
-static u32 be_get_rx_csum(struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
- return adapter->rx_csum;
-}
-
-static int be_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
-
- if (data)
- adapter->rx_csum = 1;
- else
- adapter->rx_csum = 0;
-
- return 0;
-}
-
-static void
-be_get_strings(struct net_device *netdev, uint32_t stringset, uint8_t *data)
-{
- switch (stringset) {
- case ETH_SS_STATS:
- memcpy(data, *benet_gstrings_stats,
- sizeof(benet_gstrings_stats));
- break;
- }
-}
-
-static int be_get_stats_count(struct net_device *netdev)
-{
- return BENET_STATS_LEN;
-}
-
-static void
-be_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
- int i;
-
- benet_get_stats(netdev);
-
- for (i = 0; i <= NET_DEV_STATS_LEN; i++)
- data[i] = ((unsigned long *)&adapter->benet_stats)[i];
-
- data[i] = adapter->be_stat.bes_tx_reqs;
- data[i++] = adapter->be_stat.bes_tx_fails;
- data[i++] = adapter->be_stat.bes_fwd_reqs;
- data[i++] = adapter->be_stat.bes_tx_wrbs;
-
- data[i++] = adapter->be_stat.bes_ints;
- data[i++] = adapter->be_stat.bes_events;
- data[i++] = adapter->be_stat.bes_tx_events;
- data[i++] = adapter->be_stat.bes_rx_events;
- data[i++] = adapter->be_stat.bes_tx_compl;
- data[i++] = adapter->be_stat.bes_rx_compl;
- data[i++] = adapter->be_stat.bes_ethrx_post_fail;
- data[i++] = adapter->be_stat.bes_802_3_dropped_frames;
- data[i++] = adapter->be_stat.bes_802_3_malformed_frames;
- data[i++] = adapter->be_stat.bes_rx_misc_pkts;
- data[i++] = adapter->be_stat.bes_eth_tx_rate;
- data[i++] = adapter->be_stat.bes_eth_rx_rate;
- data[i++] = adapter->be_stat.bes_rx_coal;
- data[i++] = adapter->be_stat.bes_rx_flush;
-
-}
-
-static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
- ecmd->speed = SPEED_10000;
- ecmd->duplex = DUPLEX_FULL;
- ecmd->autoneg = AUTONEG_DISABLE;
- return 0;
-}
-
-/* Get the Ring parameters from the pnob */
-static void
-be_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
-
- /* Pre Set Maxims */
- ring->rx_max_pending = pnob->rx_q_len;
- ring->rx_mini_max_pending = ring->rx_mini_max_pending;
- ring->rx_jumbo_max_pending = ring->rx_jumbo_max_pending;
- ring->tx_max_pending = pnob->tx_q_len;
-
- /* Current hardware Settings */
- ring->rx_pending = atomic_read(&pnob->rx_q_posted);
- ring->rx_mini_pending = ring->rx_mini_pending;
- ring->rx_jumbo_pending = ring->rx_jumbo_pending;
- ring->tx_pending = atomic_read(&pnob->tx_q_used);
-
-}
-
-static void
-be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- bool rxfc, txfc;
- int status;
-
- status = be_eth_get_flow_control(&pnob->fn_obj, &txfc, &rxfc);
- if (status != BE_SUCCESS) {
- dev_info(&netdev->dev, "Unable to get pause frame settings\n");
- /* return defaults */
- ecmd->rx_pause = 1;
- ecmd->tx_pause = 0;
- ecmd->autoneg = AUTONEG_ENABLE;
- return;
- }
-
- if (txfc == true)
- ecmd->tx_pause = 1;
- else
- ecmd->tx_pause = 0;
-
- if (rxfc == true)
- ecmd->rx_pause = 1;
- else
- ecmd->rx_pause = 0;
-
- ecmd->autoneg = AUTONEG_ENABLE;
-}
-
-static int
-be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- bool txfc, rxfc;
- int status;
-
- if (ecmd->autoneg != AUTONEG_ENABLE)
- return -EINVAL;
-
- if (ecmd->tx_pause)
- txfc = true;
- else
- txfc = false;
-
- if (ecmd->rx_pause)
- rxfc = true;
- else
- rxfc = false;
-
- status = be_eth_set_flow_control(&pnob->fn_obj, txfc, rxfc);
- if (status != BE_SUCCESS) {
- dev_info(&netdev->dev, "Unable to set pause frame settings\n");
- return -1;
- }
- return 0;
-}
-
-struct ethtool_ops be_ethtool_ops = {
- .get_settings = be_get_settings,
- .get_drvinfo = be_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_coalesce = be_get_coalesce,
- .set_coalesce = be_set_coalesce,
- .get_ringparam = be_get_ringparam,
- .get_pauseparam = be_get_pauseparam,
- .set_pauseparam = be_set_pauseparam,
- .get_rx_csum = be_get_rx_csum,
- .set_rx_csum = be_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ethtool_op_set_tso,
- .get_strings = be_get_strings,
- .get_stats_count = be_get_stats_count,
- .get_ethtool_stats = be_get_ethtool_stats,
-};
diff --git a/drivers/staging/benet/be_init.c b/drivers/staging/benet/be_init.c
deleted file mode 100644
index 12a026c..0000000
--- a/drivers/staging/benet/be_init.c
+++ /dev/null
@@ -1,1382 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/etherdevice.h>
-#include "benet.h"
-
-#define DRVR_VERSION "1.0.728"
-
-static const struct pci_device_id be_device_id_table[] = {
- {PCI_DEVICE(0x19a2, 0x0201)},
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, be_device_id_table);
-
-MODULE_VERSION(DRVR_VERSION);
-
-#define DRV_DESCRIPTION "ServerEngines BladeEngine Network Driver Version "
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION DRVR_VERSION);
-MODULE_AUTHOR("ServerEngines");
-MODULE_LICENSE("GPL");
-
-static unsigned int msix = 1;
-module_param(msix, uint, S_IRUGO);
-MODULE_PARM_DESC(msix, "Use MSI-x interrupts");
-
-static unsigned int rxbuf_size = 2048; /* Default RX frag size */
-module_param(rxbuf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(rxbuf_size, "Size of buffers to hold Rx data");
-
-const char be_drvr_ver[] = DRVR_VERSION;
-char be_fw_ver[32]; /* F/W version filled in by be_probe */
-char be_driver_name[] = "benet";
-
-/*
- * Number of entries in each queue.
- */
-#define EVENT_Q_LEN 1024
-#define ETH_TXQ_LEN 2048
-#define ETH_TXCQ_LEN 1024
-#define ETH_RXQ_LEN 1024 /* Does not support any other value */
-#define ETH_UC_RXCQ_LEN 1024
-#define ETH_BC_RXCQ_LEN 256
-#define MCC_Q_LEN 64 /* total size not to exceed 8 pages */
-#define MCC_CQ_LEN 256
-
-/* Bit mask describing events of interest to be traced */
-unsigned int trace_level;
-
-static int
-init_pci_be_function(struct be_adapter *adapter, struct pci_dev *pdev)
-{
- u64 pa;
-
- /* CSR */
- pa = pci_resource_start(pdev, 2);
- adapter->csr_va = ioremap_nocache(pa, pci_resource_len(pdev, 2));
- if (adapter->csr_va == NULL)
- return -ENOMEM;
-
- /* Door Bell */
- pa = pci_resource_start(pdev, 4);
- adapter->db_va = ioremap_nocache(pa, (128 * 1024));
- if (adapter->db_va == NULL) {
- iounmap(adapter->csr_va);
- return -ENOMEM;
- }
-
- /* PCI */
- pa = pci_resource_start(pdev, 1);
- adapter->pci_va = ioremap_nocache(pa, pci_resource_len(pdev, 1));
- if (adapter->pci_va == NULL) {
- iounmap(adapter->csr_va);
- iounmap(adapter->db_va);
- return -ENOMEM;
- }
- return 0;
-}
-
-/*
- This function enables the interrupt corresponding to the Event
- queue ID for the given NetObject
-*/
-void be_enable_eq_intr(struct be_net_object *pnob)
-{
- struct CQ_DB_AMAP cqdb;
- cqdb.dw[0] = 0;
- AMAP_SET_BITS_PTR(CQ_DB, event, &cqdb, 1);
- AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, 1);
- AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, 0);
- AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, pnob->event_q_id);
- PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
-}
-
-/*
- This function disables the interrupt corresponding to the Event
- queue ID for the given NetObject
-*/
-void be_disable_eq_intr(struct be_net_object *pnob)
-{
- struct CQ_DB_AMAP cqdb;
- cqdb.dw[0] = 0;
- AMAP_SET_BITS_PTR(CQ_DB, event, &cqdb, 1);
- AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, 0);
- AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, 0);
- AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, pnob->event_q_id);
- PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
-}
-
-/*
- This function enables the interrupt from the network function
- of the BladeEngine. Use the function be_disable_eq_intr()
- to enable the interrupt from the event queue of only one specific
- NetObject
-*/
-void be_enable_intr(struct be_net_object *pnob)
-{
- struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
- u32 host_intr;
-
- ctrl.dw[0] = PCICFG1_READ(&pnob->fn_obj, host_timer_int_ctrl);
- host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
- hostintr, ctrl.dw);
- if (!host_intr) {
- AMAP_SET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
- hostintr, ctrl.dw, 1);
- PCICFG1_WRITE(&pnob->fn_obj, host_timer_int_ctrl,
- ctrl.dw[0]);
- }
-}
-
-/*
- This function disables the interrupt from the network function of
- the BladeEngine. Use the function be_disable_eq_intr() to
- disable the interrupt from the event queue of only one specific NetObject
-*/
-void be_disable_intr(struct be_net_object *pnob)
-{
-
- struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
- u32 host_intr;
- ctrl.dw[0] = PCICFG1_READ(&pnob->fn_obj, host_timer_int_ctrl);
- host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
- hostintr, ctrl.dw);
- if (host_intr) {
- AMAP_SET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR, hostintr,
- ctrl.dw, 0);
- PCICFG1_WRITE(&pnob->fn_obj, host_timer_int_ctrl,
- ctrl.dw[0]);
- }
-}
-
-static int be_enable_msix(struct be_adapter *adapter)
-{
- int i, ret;
-
- if (!msix)
- return -1;
-
- for (i = 0; i < BE_MAX_REQ_MSIX_VECTORS; i++)
- adapter->msix_entries[i].entry = i;
-
- ret = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- BE_MAX_REQ_MSIX_VECTORS);
-
- if (ret == 0)
- adapter->msix_enabled = 1;
- return ret;
-}
-
-static int be_register_isr(struct be_adapter *adapter,
- struct be_net_object *pnob)
-{
- struct net_device *netdev = pnob->netdev;
- int intx = 0, r;
-
- netdev->irq = adapter->pdev->irq;
- r = be_enable_msix(adapter);
-
- if (r == 0) {
- r = request_irq(adapter->msix_entries[0].vector,
- be_int, IRQF_SHARED, netdev->name, netdev);
- if (r) {
- printk(KERN_WARNING
- "MSIX Request IRQ failed - Errno %d\n", r);
- intx = 1;
- pci_disable_msix(adapter->pdev);
- adapter->msix_enabled = 0;
- }
- } else {
- intx = 1;
- }
-
- if (intx) {
- r = request_irq(netdev->irq, be_int, IRQF_SHARED,
- netdev->name, netdev);
- if (r) {
- printk(KERN_WARNING
- "INTx Request IRQ failed - Errno %d\n", r);
- return -1;
- }
- }
- adapter->isr_registered = 1;
- return 0;
-}
-
-static void be_unregister_isr(struct be_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdevp;
- if (adapter->isr_registered) {
- if (adapter->msix_enabled) {
- free_irq(adapter->msix_entries[0].vector, netdev);
- pci_disable_msix(adapter->pdev);
- adapter->msix_enabled = 0;
- } else {
- free_irq(netdev->irq, netdev);
- }
- adapter->isr_registered = 0;
- }
-}
-
-/*
- This function processes the Flush Completions that are issued by the
- ARM F/W, when a Recv Ring is destroyed. A flush completion is
- identified when a Rx COmpl descriptor has the tcpcksum and udpcksum
- set and the pktsize is 32. These completions are received on the
- Rx Completion Queue.
-*/
-static u32 be_process_rx_flush_cmpl(struct be_net_object *pnob)
-{
- struct ETH_RX_COMPL_AMAP *rxcp;
- unsigned int i = 0;
- while ((rxcp = be_get_rx_cmpl(pnob)) != NULL) {
- be_notify_cmpl(pnob, 1, pnob->rx_cq_id, 1);
- i++;
- }
- return i;
-}
-
-static void be_tx_q_clean(struct be_net_object *pnob)
-{
- while (atomic_read(&pnob->tx_q_used))
- process_one_tx_compl(pnob, tx_compl_lastwrb_idx_get(pnob));
-}
-
-static void be_rx_q_clean(struct be_net_object *pnob)
-{
- if (pnob->rx_ctxt) {
- int i;
- struct be_rx_page_info *rx_page_info;
- for (i = 0; i < pnob->rx_q_len; i++) {
- rx_page_info = &(pnob->rx_page_info[i]);
- if (!pnob->rx_pg_shared || rx_page_info->page_offset) {
- pci_unmap_page(pnob->adapter->pdev,
- pci_unmap_addr(rx_page_info, bus),
- pnob->rx_buf_size,
- PCI_DMA_FROMDEVICE);
- }
- if (rx_page_info->page)
- put_page(rx_page_info->page);
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- }
- pnob->rx_pg_info_hd = 0;
- }
-}
-
-static void be_destroy_netobj(struct be_net_object *pnob)
-{
- int status;
-
- if (pnob->tx_q_created) {
- status = be_eth_sq_destroy(&pnob->tx_q_obj);
- pnob->tx_q_created = 0;
- }
-
- if (pnob->rx_q_created) {
- status = be_eth_rq_destroy(&pnob->rx_q_obj);
- if (status != 0) {
- status = be_eth_rq_destroy_options(&pnob->rx_q_obj, 0,
- NULL, NULL);
- BUG_ON(status);
- }
- pnob->rx_q_created = 0;
- }
-
- be_process_rx_flush_cmpl(pnob);
-
- if (pnob->tx_cq_created) {
- status = be_cq_destroy(&pnob->tx_cq_obj);
- pnob->tx_cq_created = 0;
- }
-
- if (pnob->rx_cq_created) {
- status = be_cq_destroy(&pnob->rx_cq_obj);
- pnob->rx_cq_created = 0;
- }
-
- if (pnob->mcc_q_created) {
- status = be_mcc_ring_destroy(&pnob->mcc_q_obj);
- pnob->mcc_q_created = 0;
- }
- if (pnob->mcc_cq_created) {
- status = be_cq_destroy(&pnob->mcc_cq_obj);
- pnob->mcc_cq_created = 0;
- }
-
- if (pnob->event_q_created) {
- status = be_eq_destroy(&pnob->event_q_obj);
- pnob->event_q_created = 0;
- }
- be_function_cleanup(&pnob->fn_obj);
-}
-
-/*
- * free all resources associated with a pnob
- * Called at the time of module cleanup as well a any error during
- * module init. Some resources may be partially allocated in a NetObj.
- */
-static void netobject_cleanup(struct be_adapter *adapter,
- struct be_net_object *pnob)
-{
- struct net_device *netdev = adapter->netdevp;
-
- if (netif_running(netdev)) {
- netif_stop_queue(netdev);
- be_wait_nic_tx_cmplx_cmpl(pnob);
- be_disable_eq_intr(pnob);
- }
-
- be_unregister_isr(adapter);
-
- if (adapter->tasklet_started) {
- tasklet_kill(&(adapter->sts_handler));
- adapter->tasklet_started = 0;
- }
- if (pnob->fn_obj_created)
- be_disable_intr(pnob);
-
- if (adapter->dev_state != BE_DEV_STATE_NONE)
- unregister_netdev(netdev);
-
- if (pnob->fn_obj_created)
- be_destroy_netobj(pnob);
-
- adapter->net_obj = NULL;
- adapter->netdevp = NULL;
-
- be_rx_q_clean(pnob);
- if (pnob->rx_ctxt) {
- kfree(pnob->rx_page_info);
- kfree(pnob->rx_ctxt);
- }
-
- be_tx_q_clean(pnob);
- kfree(pnob->tx_ctxt);
-
- if (pnob->mcc_q)
- pci_free_consistent(adapter->pdev, pnob->mcc_q_size,
- pnob->mcc_q, pnob->mcc_q_bus);
-
- if (pnob->mcc_wrb_ctxt)
- free_pages((unsigned long)pnob->mcc_wrb_ctxt,
- get_order(pnob->mcc_wrb_ctxt_size));
-
- if (pnob->mcc_cq)
- pci_free_consistent(adapter->pdev, pnob->mcc_cq_size,
- pnob->mcc_cq, pnob->mcc_cq_bus);
-
- if (pnob->event_q)
- pci_free_consistent(adapter->pdev, pnob->event_q_size,
- pnob->event_q, pnob->event_q_bus);
-
- if (pnob->tx_cq)
- pci_free_consistent(adapter->pdev, pnob->tx_cq_size,
- pnob->tx_cq, pnob->tx_cq_bus);
-
- if (pnob->tx_q)
- pci_free_consistent(adapter->pdev, pnob->tx_q_size,
- pnob->tx_q, pnob->tx_q_bus);
-
- if (pnob->rx_q)
- pci_free_consistent(adapter->pdev, pnob->rx_q_size,
- pnob->rx_q, pnob->rx_q_bus);
-
- if (pnob->rx_cq)
- pci_free_consistent(adapter->pdev, pnob->rx_cq_size,
- pnob->rx_cq, pnob->rx_cq_bus);
-
-
- if (pnob->mb_ptr)
- pci_free_consistent(adapter->pdev, pnob->mb_size, pnob->mb_ptr,
- pnob->mb_bus);
-
- free_netdev(netdev);
-}
-
-
-static int be_nob_ring_alloc(struct be_adapter *adapter,
- struct be_net_object *pnob)
-{
- u32 size;
-
- /* Mail box rd; mailbox pointer needs to be 16 byte aligned */
- pnob->mb_size = sizeof(struct MCC_MAILBOX_AMAP) + 16;
- pnob->mb_ptr = pci_alloc_consistent(adapter->pdev, pnob->mb_size,
- &pnob->mb_bus);
- if (!pnob->mb_bus)
- return -1;
- memset(pnob->mb_ptr, 0, pnob->mb_size);
- pnob->mb_rd.va = PTR_ALIGN(pnob->mb_ptr, 16);
- pnob->mb_rd.pa = PTR_ALIGN(pnob->mb_bus, 16);
- pnob->mb_rd.length = sizeof(struct MCC_MAILBOX_AMAP);
- /*
- * Event queue
- */
- pnob->event_q_len = EVENT_Q_LEN;
- pnob->event_q_size = pnob->event_q_len * sizeof(struct EQ_ENTRY_AMAP);
- pnob->event_q = pci_alloc_consistent(adapter->pdev, pnob->event_q_size,
- &pnob->event_q_bus);
- if (!pnob->event_q_bus)
- return -1;
- memset(pnob->event_q, 0, pnob->event_q_size);
- /*
- * Eth TX queue
- */
- pnob->tx_q_len = ETH_TXQ_LEN;
- pnob->tx_q_port = 0;
- pnob->tx_q_size = pnob->tx_q_len * sizeof(struct ETH_WRB_AMAP);
- pnob->tx_q = pci_alloc_consistent(adapter->pdev, pnob->tx_q_size,
- &pnob->tx_q_bus);
- if (!pnob->tx_q_bus)
- return -1;
- memset(pnob->tx_q, 0, pnob->tx_q_size);
- /*
- * Eth TX Compl queue
- */
- pnob->txcq_len = ETH_TXCQ_LEN;
- pnob->tx_cq_size = pnob->txcq_len * sizeof(struct ETH_TX_COMPL_AMAP);
- pnob->tx_cq = pci_alloc_consistent(adapter->pdev, pnob->tx_cq_size,
- &pnob->tx_cq_bus);
- if (!pnob->tx_cq_bus)
- return -1;
- memset(pnob->tx_cq, 0, pnob->tx_cq_size);
- /*
- * Eth RX queue
- */
- pnob->rx_q_len = ETH_RXQ_LEN;
- pnob->rx_q_size = pnob->rx_q_len * sizeof(struct ETH_RX_D_AMAP);
- pnob->rx_q = pci_alloc_consistent(adapter->pdev, pnob->rx_q_size,
- &pnob->rx_q_bus);
- if (!pnob->rx_q_bus)
- return -1;
- memset(pnob->rx_q, 0, pnob->rx_q_size);
- /*
- * Eth Unicast RX Compl queue
- */
- pnob->rx_cq_len = ETH_UC_RXCQ_LEN;
- pnob->rx_cq_size = pnob->rx_cq_len *
- sizeof(struct ETH_RX_COMPL_AMAP);
- pnob->rx_cq = pci_alloc_consistent(adapter->pdev, pnob->rx_cq_size,
- &pnob->rx_cq_bus);
- if (!pnob->rx_cq_bus)
- return -1;
- memset(pnob->rx_cq, 0, pnob->rx_cq_size);
-
- /* TX resources */
- size = pnob->tx_q_len * sizeof(void **);
- pnob->tx_ctxt = kzalloc(size, GFP_KERNEL);
- if (pnob->tx_ctxt == NULL)
- return -1;
-
- /* RX resources */
- size = pnob->rx_q_len * sizeof(void *);
- pnob->rx_ctxt = kzalloc(size, GFP_KERNEL);
- if (pnob->rx_ctxt == NULL)
- return -1;
-
- size = (pnob->rx_q_len * sizeof(struct be_rx_page_info));
- pnob->rx_page_info = kzalloc(size, GFP_KERNEL);
- if (pnob->rx_page_info == NULL)
- return -1;
-
- adapter->eth_statsp = kzalloc(sizeof(struct FWCMD_ETH_GET_STATISTICS),
- GFP_KERNEL);
- if (adapter->eth_statsp == NULL)
- return -1;
- pnob->rx_buf_size = rxbuf_size;
- return 0;
-}
-
-/*
- This function initializes the be_net_object for subsequent
- network operations.
-
- Before calling this function, the driver must have allocated
- space for the NetObject structure, initialized the structure,
- allocated DMAable memory for all the network queues that form
- part of the NetObject and populated the start address (virtual)
- and number of entries allocated for each queue in the NetObject structure.
-
- The driver must also have allocated memory to hold the
- mailbox structure (MCC_MAILBOX) and post the physical address,
- virtual addresses and the size of the mailbox memory in the
- NetObj.mb_rd. This structure is used by BECLIB for
- initial communication with the embedded MCC processor. BECLIB
- uses the mailbox until MCC rings are created for more efficient
- communication with the MCC processor.
-
- If the driver wants to create multiple network interface for more
- than one protection domain, it can call be_create_netobj()
- multiple times once for each protection domain. A Maximum of
- 32 protection domains are supported.
-
-*/
-static int
-be_create_netobj(struct be_net_object *pnob, u8 __iomem *csr_va,
- u8 __iomem *db_va, u8 __iomem *pci_va)
-{
- int status = 0;
- bool eventable = false, tx_no_delay = false, rx_no_delay = false;
- struct be_eq_object *eq_objectp = NULL;
- struct be_function_object *pfob = &pnob->fn_obj;
- struct ring_desc rd;
- u32 set_rxbuf_size;
- u32 tx_cmpl_wm = CEV_WMARK_96; /* 0xffffffff to disable */
- u32 rx_cmpl_wm = CEV_WMARK_160; /* 0xffffffff to disable */
- u32 eq_delay = 0; /* delay in 8usec units. 0xffffffff to disable */
-
- memset(&rd, 0, sizeof(struct ring_desc));
-
- status = be_function_object_create(csr_va, db_va, pci_va,
- BE_FUNCTION_TYPE_NETWORK, &pnob->mb_rd, pfob);
- if (status != BE_SUCCESS)
- return status;
- pnob->fn_obj_created = true;
-
- if (tx_cmpl_wm == 0xffffffff)
- tx_no_delay = true;
- if (rx_cmpl_wm == 0xffffffff)
- rx_no_delay = true;
- /*
- * now create the necessary rings
- * Event Queue first.
- */
- if (pnob->event_q_len) {
- rd.va = pnob->event_q;
- rd.pa = pnob->event_q_bus;
- rd.length = pnob->event_q_size;
-
- status = be_eq_create(pfob, &rd, 4, pnob->event_q_len,
- (u32) -1, /* CEV_WMARK_* or -1 */
- eq_delay, /* in 8us units, or -1 */
- &pnob->event_q_obj);
- if (status != BE_SUCCESS)
- goto error_ret;
- pnob->event_q_id = pnob->event_q_obj.eq_id;
- pnob->event_q_created = 1;
- eventable = true;
- eq_objectp = &pnob->event_q_obj;
- }
- /*
- * Now Eth Tx Compl. queue.
- */
- if (pnob->txcq_len) {
- rd.va = pnob->tx_cq;
- rd.pa = pnob->tx_cq_bus;
- rd.length = pnob->tx_cq_size;
-
- status = be_cq_create(pfob, &rd,
- pnob->txcq_len * sizeof(struct ETH_TX_COMPL_AMAP),
- false, /* solicted events, */
- tx_no_delay, /* nodelay */
- tx_cmpl_wm, /* Watermark encodings */
- eq_objectp, &pnob->tx_cq_obj);
- if (status != BE_SUCCESS)
- goto error_ret;
-
- pnob->tx_cq_id = pnob->tx_cq_obj.cq_id;
- pnob->tx_cq_created = 1;
- }
- /*
- * Eth Tx queue
- */
- if (pnob->tx_q_len) {
- struct be_eth_sq_parameters ex_params = { 0 };
- u32 type;
-
- if (pnob->tx_q_port) {
- /* TXQ to be bound to a specific port */
- type = BE_ETH_TX_RING_TYPE_BOUND;
- ex_params.port = pnob->tx_q_port - 1;
- } else
- type = BE_ETH_TX_RING_TYPE_STANDARD;
-
- rd.va = pnob->tx_q;
- rd.pa = pnob->tx_q_bus;
- rd.length = pnob->tx_q_size;
-
- status = be_eth_sq_create_ex(pfob, &rd,
- pnob->tx_q_len * sizeof(struct ETH_WRB_AMAP),
- type, 2, &pnob->tx_cq_obj,
- &ex_params, &pnob->tx_q_obj);
-
- if (status != BE_SUCCESS)
- goto error_ret;
-
- pnob->tx_q_id = pnob->tx_q_obj.bid;
- pnob->tx_q_created = 1;
- }
- /*
- * Now Eth Rx compl. queue. Always needed.
- */
- rd.va = pnob->rx_cq;
- rd.pa = pnob->rx_cq_bus;
- rd.length = pnob->rx_cq_size;
-
- status = be_cq_create(pfob, &rd,
- pnob->rx_cq_len * sizeof(struct ETH_RX_COMPL_AMAP),
- false, /* solicted events, */
- rx_no_delay, /* nodelay */
- rx_cmpl_wm, /* Watermark encodings */
- eq_objectp, &pnob->rx_cq_obj);
- if (status != BE_SUCCESS)
- goto error_ret;
-
- pnob->rx_cq_id = pnob->rx_cq_obj.cq_id;
- pnob->rx_cq_created = 1;
-
- status = be_eth_rq_set_frag_size(pfob, pnob->rx_buf_size,
- (u32 *) &set_rxbuf_size);
- if (status != BE_SUCCESS) {
- be_eth_rq_get_frag_size(pfob, (u32 *) &pnob->rx_buf_size);
- if ((pnob->rx_buf_size != 2048) && (pnob->rx_buf_size != 4096)
- && (pnob->rx_buf_size != 8192))
- goto error_ret;
- } else {
- if (pnob->rx_buf_size != set_rxbuf_size)
- pnob->rx_buf_size = set_rxbuf_size;
- }
- /*
- * Eth RX queue. be_eth_rq_create() always assumes 2 pages size
- */
- rd.va = pnob->rx_q;
- rd.pa = pnob->rx_q_bus;
- rd.length = pnob->rx_q_size;
-
- status = be_eth_rq_create(pfob, &rd, &pnob->rx_cq_obj,
- &pnob->rx_cq_obj, &pnob->rx_q_obj);
-
- if (status != BE_SUCCESS)
- goto error_ret;
-
- pnob->rx_q_id = pnob->rx_q_obj.rid;
- pnob->rx_q_created = 1;
-
- return BE_SUCCESS; /* All required queues created. */
-
-error_ret:
- be_destroy_netobj(pnob);
- return status;
-}
-
-static int be_nob_ring_init(struct be_adapter *adapter,
- struct be_net_object *pnob)
-{
- int status;
-
- pnob->event_q_tl = 0;
-
- pnob->tx_q_hd = 0;
- pnob->tx_q_tl = 0;
-
- pnob->tx_cq_tl = 0;
-
- pnob->rx_cq_tl = 0;
-
- memset(pnob->event_q, 0, pnob->event_q_size);
- memset(pnob->tx_cq, 0, pnob->tx_cq_size);
- memset(pnob->tx_ctxt, 0, pnob->tx_q_len * sizeof(void **));
- memset(pnob->rx_ctxt, 0, pnob->rx_q_len * sizeof(void *));
- pnob->rx_pg_info_hd = 0;
- pnob->rx_q_hd = 0;
- atomic_set(&pnob->rx_q_posted, 0);
-
- status = be_create_netobj(pnob, adapter->csr_va, adapter->db_va,
- adapter->pci_va);
- if (status != BE_SUCCESS)
- return -1;
-
- be_post_eth_rx_buffs(pnob);
- return 0;
-}
-
-/* This function handles async callback for link status */
-static void
-be_link_status_async_callback(void *context, u32 event_code, void *event)
-{
- struct ASYNC_EVENT_LINK_STATE_AMAP *link_status = event;
- struct be_adapter *adapter = context;
- bool link_enable = false;
- struct be_net_object *pnob;
- struct ASYNC_EVENT_TRAILER_AMAP *async_trailer;
- struct net_device *netdev;
- u32 async_event_code, async_event_type, active_port;
- u32 port0_link_status, port1_link_status, port0_duplex, port1_duplex;
- u32 port0_speed, port1_speed;
-
- if (event_code != ASYNC_EVENT_CODE_LINK_STATE) {
- /* Not our event to handle */
- return;
- }
- async_trailer = (struct ASYNC_EVENT_TRAILER_AMAP *)
- ((u8 *) event + sizeof(struct MCC_CQ_ENTRY_AMAP) -
- sizeof(struct ASYNC_EVENT_TRAILER_AMAP));
-
- async_event_code = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER, event_code,
- async_trailer);
- BUG_ON(async_event_code != ASYNC_EVENT_CODE_LINK_STATE);
-
- pnob = adapter->net_obj;
- netdev = pnob->netdev;
-
- /* Determine if this event is a switch VLD or a physical link event */
- async_event_type = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER, event_type,
- async_trailer);
- active_port = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- active_port, link_status);
- port0_link_status = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- port0_link_status, link_status);
- port1_link_status = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- port1_link_status, link_status);
- port0_duplex = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- port0_duplex, link_status);
- port1_duplex = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- port1_duplex, link_status);
- port0_speed = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- port0_speed, link_status);
- port1_speed = AMAP_GET_BITS_PTR(ASYNC_EVENT_LINK_STATE,
- port1_speed, link_status);
- if (async_event_type == NTWK_LINK_TYPE_VIRTUAL) {
- adapter->be_stat.bes_link_change_virtual++;
- if (adapter->be_link_sts->active_port != active_port) {
- dev_notice(&netdev->dev,
- "Active port changed due to VLD on switch\n");
- } else {
- dev_notice(&netdev->dev, "Link status update\n");
- }
-
- } else {
- adapter->be_stat.bes_link_change_physical++;
- if (adapter->be_link_sts->active_port != active_port) {
- dev_notice(&netdev->dev,
- "Active port changed due to port link"
- " status change\n");
- } else {
- dev_notice(&netdev->dev, "Link status update\n");
- }
- }
-
- memset(adapter->be_link_sts, 0, sizeof(adapter->be_link_sts));
-
- if ((port0_link_status == ASYNC_EVENT_LINK_UP) ||
- (port1_link_status == ASYNC_EVENT_LINK_UP)) {
- if ((adapter->port0_link_sts == BE_PORT_LINK_DOWN) &&
- (adapter->port1_link_sts == BE_PORT_LINK_DOWN)) {
- /* Earlier both the ports are down So link is up */
- link_enable = true;
- }
-
- if (port0_link_status == ASYNC_EVENT_LINK_UP) {
- adapter->port0_link_sts = BE_PORT_LINK_UP;
- adapter->be_link_sts->mac0_duplex = port0_duplex;
- adapter->be_link_sts->mac0_speed = port0_speed;
- if (active_port == NTWK_PORT_A)
- adapter->be_link_sts->active_port = 0;
- } else
- adapter->port0_link_sts = BE_PORT_LINK_DOWN;
-
- if (port1_link_status == ASYNC_EVENT_LINK_UP) {
- adapter->port1_link_sts = BE_PORT_LINK_UP;
- adapter->be_link_sts->mac1_duplex = port1_duplex;
- adapter->be_link_sts->mac1_speed = port1_speed;
- if (active_port == NTWK_PORT_B)
- adapter->be_link_sts->active_port = 1;
- } else
- adapter->port1_link_sts = BE_PORT_LINK_DOWN;
-
- printk(KERN_INFO "Link Properties for %s:\n", netdev->name);
- dev_info(&netdev->dev, "Link Properties:\n");
- be_print_link_info(adapter->be_link_sts);
-
- if (!link_enable)
- return;
- /*
- * Both ports were down previously, but atleast one of
- * them has come up if this netdevice's carrier is not up,
- * then indicate to stack
- */
- if (!netif_carrier_ok(netdev)) {
- netif_start_queue(netdev);
- netif_carrier_on(netdev);
- }
- return;
- }
-
- /* Now both the ports are down. Tell the stack about it */
- dev_info(&netdev->dev, "Both ports are down\n");
- adapter->port0_link_sts = BE_PORT_LINK_DOWN;
- adapter->port1_link_sts = BE_PORT_LINK_DOWN;
- if (netif_carrier_ok(netdev)) {
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- }
- return;
-}
-
-static int be_mcc_create(struct be_adapter *adapter)
-{
- struct be_net_object *pnob;
-
- pnob = adapter->net_obj;
- /*
- * Create the MCC ring so that all further communication with
- * MCC can go thru the ring. we do this at the end since
- * we do not want to be dealing with interrupts until the
- * initialization is complete.
- */
- pnob->mcc_q_len = MCC_Q_LEN;
- pnob->mcc_q_size = pnob->mcc_q_len * sizeof(struct MCC_WRB_AMAP);
- pnob->mcc_q = pci_alloc_consistent(adapter->pdev, pnob->mcc_q_size,
- &pnob->mcc_q_bus);
- if (!pnob->mcc_q_bus)
- return -1;
- /*
- * space for MCC WRB context
- */
- pnob->mcc_wrb_ctxtLen = MCC_Q_LEN;
- pnob->mcc_wrb_ctxt_size = pnob->mcc_wrb_ctxtLen *
- sizeof(struct be_mcc_wrb_context);
- pnob->mcc_wrb_ctxt = (void *)__get_free_pages(GFP_KERNEL,
- get_order(pnob->mcc_wrb_ctxt_size));
- if (pnob->mcc_wrb_ctxt == NULL)
- return -1;
- /*
- * Space for MCC compl. ring
- */
- pnob->mcc_cq_len = MCC_CQ_LEN;
- pnob->mcc_cq_size = pnob->mcc_cq_len * sizeof(struct MCC_CQ_ENTRY_AMAP);
- pnob->mcc_cq = pci_alloc_consistent(adapter->pdev, pnob->mcc_cq_size,
- &pnob->mcc_cq_bus);
- if (!pnob->mcc_cq_bus)
- return -1;
- return 0;
-}
-
-/*
- This function creates the MCC request and completion ring required
- for communicating with the ARM processor. The caller must have
- allocated required amount of memory for the MCC ring and MCC
- completion ring and posted the virtual address and number of
- entries in the corresponding members (mcc_q and mcc_cq) in the
- NetObject struture.
-
- When this call is completed, all further communication with
- ARM will switch from mailbox to this ring.
-
- pnob - Pointer to the NetObject structure. This NetObject should
- have been created using a previous call to be_create_netobj()
-*/
-int be_create_mcc_rings(struct be_net_object *pnob)
-{
- int status = 0;
- struct ring_desc rd;
- struct be_function_object *pfob = &pnob->fn_obj;
-
- memset(&rd, 0, sizeof(struct ring_desc));
- if (pnob->mcc_cq_len) {
- rd.va = pnob->mcc_cq;
- rd.pa = pnob->mcc_cq_bus;
- rd.length = pnob->mcc_cq_size;
-
- status = be_cq_create(pfob, &rd,
- pnob->mcc_cq_len * sizeof(struct MCC_CQ_ENTRY_AMAP),
- false, /* solicted events, */
- true, /* nodelay */
- 0, /* 0 Watermark since Nodelay is true */
- &pnob->event_q_obj,
- &pnob->mcc_cq_obj);
-
- if (status != BE_SUCCESS)
- return status;
-
- pnob->mcc_cq_id = pnob->mcc_cq_obj.cq_id;
- pnob->mcc_cq_created = 1;
- }
- if (pnob->mcc_q_len) {
- rd.va = pnob->mcc_q;
- rd.pa = pnob->mcc_q_bus;
- rd.length = pnob->mcc_q_size;
-
- status = be_mcc_ring_create(pfob, &rd,
- pnob->mcc_q_len * sizeof(struct MCC_WRB_AMAP),
- pnob->mcc_wrb_ctxt, pnob->mcc_wrb_ctxtLen,
- &pnob->mcc_cq_obj, &pnob->mcc_q_obj);
-
- if (status != BE_SUCCESS)
- return status;
-
- pnob->mcc_q_created = 1;
- }
- return BE_SUCCESS;
-}
-
-static int be_mcc_init(struct be_adapter *adapter)
-{
- u32 r;
- struct be_net_object *pnob;
-
- pnob = adapter->net_obj;
- memset(pnob->mcc_q, 0, pnob->mcc_q_size);
- pnob->mcc_q_hd = 0;
-
- memset(pnob->mcc_wrb_ctxt, 0, pnob->mcc_wrb_ctxt_size);
-
- memset(pnob->mcc_cq, 0, pnob->mcc_cq_size);
- pnob->mcc_cq_tl = 0;
-
- r = be_create_mcc_rings(adapter->net_obj);
- if (r != BE_SUCCESS)
- return -1;
-
- return 0;
-}
-
-static void be_remove(struct pci_dev *pdev)
-{
- struct be_net_object *pnob;
- struct be_adapter *adapter;
-
- adapter = pci_get_drvdata(pdev);
- if (!adapter)
- return;
-
- pci_set_drvdata(pdev, NULL);
- pnob = (struct be_net_object *)adapter->net_obj;
-
- flush_scheduled_work();
-
- if (pnob) {
- /* Unregister async callback function for link status updates */
- if (pnob->mcc_q_created)
- be_mcc_add_async_event_callback(&pnob->mcc_q_obj,
- NULL, NULL);
- netobject_cleanup(adapter, pnob);
- }
-
- if (adapter->csr_va)
- iounmap(adapter->csr_va);
- if (adapter->db_va)
- iounmap(adapter->db_va);
- if (adapter->pci_va)
- iounmap(adapter->pci_va);
-
- pci_release_regions(adapter->pdev);
- pci_disable_device(adapter->pdev);
-
- kfree(adapter->be_link_sts);
- kfree(adapter->eth_statsp);
-
- if (adapter->timer_ctxt.get_stats_timer.function)
- del_timer_sync(&adapter->timer_ctxt.get_stats_timer);
- kfree(adapter);
-}
-
-/*
- * This function is called by the PCI sub-system when it finds a PCI
- * device with dev/vendor IDs that match with one of our devices.
- * All of the driver initialization is done in this function.
- */
-static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
-{
- int status = 0;
- struct be_adapter *adapter;
- struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD get_fwv;
- struct be_net_object *pnob;
- struct net_device *netdev;
-
- status = pci_enable_device(pdev);
- if (status)
- goto error;
-
- status = pci_request_regions(pdev, be_driver_name);
- if (status)
- goto error_pci_req;
-
- pci_set_master(pdev);
- adapter = kzalloc(sizeof(struct be_adapter), GFP_KERNEL);
- if (adapter == NULL) {
- status = -ENOMEM;
- goto error_adapter;
- }
- adapter->dev_state = BE_DEV_STATE_NONE;
- adapter->pdev = pdev;
- pci_set_drvdata(pdev, adapter);
-
- adapter->enable_aic = 1;
- adapter->max_eqd = MAX_EQD;
- adapter->min_eqd = 0;
- adapter->cur_eqd = 0;
-
- status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
- if (!status) {
- adapter->dma_64bit_cap = true;
- } else {
- adapter->dma_64bit_cap = false;
- status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (status != 0) {
- printk(KERN_ERR "Could not set PCI DMA Mask\n");
- goto cleanup;
- }
- }
-
- status = init_pci_be_function(adapter, pdev);
- if (status != 0) {
- printk(KERN_ERR "Failed to map PCI BARS\n");
- status = -ENOMEM;
- goto cleanup;
- }
-
- be_trace_set_level(DL_ALWAYS | DL_ERR);
-
- adapter->be_link_sts = kmalloc(sizeof(struct BE_LINK_STATUS),
- GFP_KERNEL);
- if (adapter->be_link_sts == NULL) {
- printk(KERN_ERR "Memory allocation for link status "
- "buffer failed\n");
- goto cleanup;
- }
- spin_lock_init(&adapter->txq_lock);
-
- netdev = alloc_etherdev(sizeof(struct be_net_object));
- if (netdev == NULL) {
- status = -ENOMEM;
- goto cleanup;
- }
- pnob = netdev_priv(netdev);
- adapter->net_obj = pnob;
- adapter->netdevp = netdev;
- pnob->adapter = adapter;
- pnob->netdev = netdev;
-
- status = be_nob_ring_alloc(adapter, pnob);
- if (status != 0)
- goto cleanup;
-
- status = be_nob_ring_init(adapter, pnob);
- if (status != 0)
- goto cleanup;
-
- be_rxf_mac_address_read_write(&pnob->fn_obj, false, false, false,
- false, false, netdev->dev_addr, NULL, NULL);
-
- netdev->init = &benet_init;
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
-
- SET_NETDEV_DEV(netdev, &(adapter->pdev->dev));
-
- netif_napi_add(netdev, &pnob->napi, be_poll, 64);
-
- /* if the rx_frag size if 2K, one page is shared as two RX frags */
- pnob->rx_pg_shared =
- (pnob->rx_buf_size <= PAGE_SIZE / 2) ? true : false;
- if (pnob->rx_buf_size != rxbuf_size) {
- printk(KERN_WARNING
- "Could not set Rx buffer size to %d. Using %d\n",
- rxbuf_size, pnob->rx_buf_size);
- rxbuf_size = pnob->rx_buf_size;
- }
-
- tasklet_init(&(adapter->sts_handler), be_process_intr,
- (unsigned long)adapter);
- adapter->tasklet_started = 1;
- spin_lock_init(&(adapter->int_lock));
-
- status = be_register_isr(adapter, pnob);
- if (status != 0)
- goto cleanup;
-
- adapter->rx_csum = 1;
- adapter->max_rx_coal = BE_LRO_MAX_PKTS;
-
- memset(&get_fwv, 0,
- sizeof(struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD));
- printk(KERN_INFO "BladeEngine Driver version:%s. "
- "Copyright ServerEngines, Corporation 2005 - 2008\n",
- be_drvr_ver);
- status = be_function_get_fw_version(&pnob->fn_obj, &get_fwv, NULL,
- NULL);
- if (status == BE_SUCCESS) {
- strncpy(be_fw_ver, get_fwv.firmware_version_string, 32);
- printk(KERN_INFO "BladeEngine Firmware Version:%s\n",
- get_fwv.firmware_version_string);
- } else {
- printk(KERN_WARNING "Unable to get BE Firmware Version\n");
- }
-
- sema_init(&adapter->get_eth_stat_sem, 0);
- init_timer(&adapter->timer_ctxt.get_stats_timer);
- atomic_set(&adapter->timer_ctxt.get_stat_flag, 0);
- adapter->timer_ctxt.get_stats_timer.function =
- &be_get_stats_timer_handler;
-
- status = be_mcc_create(adapter);
- if (status < 0)
- goto cleanup;
- status = be_mcc_init(adapter);
- if (status < 0)
- goto cleanup;
-
-
- status = be_mcc_add_async_event_callback(&adapter->net_obj->mcc_q_obj,
- be_link_status_async_callback, (void *)adapter);
- if (status != BE_SUCCESS) {
- printk(KERN_WARNING "add_async_event_callback failed");
- printk(KERN_WARNING
- "Link status changes may not be reflected\n");
- }
-
- status = register_netdev(netdev);
- if (status != 0)
- goto cleanup;
- be_update_link_status(adapter);
- adapter->dev_state = BE_DEV_STATE_INIT;
- return 0;
-
-cleanup:
- be_remove(pdev);
- return status;
-error_adapter:
- pci_release_regions(pdev);
-error_pci_req:
- pci_disable_device(pdev);
-error:
- printk(KERN_ERR "BladeEngine initalization failed\n");
- return status;
-}
-
-/*
- * Get the current link status and print the status on console
- */
-void be_update_link_status(struct be_adapter *adapter)
-{
- int status;
- struct be_net_object *pnob = adapter->net_obj;
-
- status = be_rxf_link_status(&pnob->fn_obj, adapter->be_link_sts, NULL,
- NULL, NULL);
- if (status == BE_SUCCESS) {
- if (adapter->be_link_sts->mac0_speed &&
- adapter->be_link_sts->mac0_duplex)
- adapter->port0_link_sts = BE_PORT_LINK_UP;
- else
- adapter->port0_link_sts = BE_PORT_LINK_DOWN;
-
- if (adapter->be_link_sts->mac1_speed &&
- adapter->be_link_sts->mac1_duplex)
- adapter->port1_link_sts = BE_PORT_LINK_UP;
- else
- adapter->port1_link_sts = BE_PORT_LINK_DOWN;
-
- dev_info(&pnob->netdev->dev, "Link Properties:\n");
- be_print_link_info(adapter->be_link_sts);
- return;
- }
- dev_info(&pnob->netdev->dev, "Could not get link status\n");
- return;
-}
-
-
-#ifdef CONFIG_PM
-static void
-be_pm_cleanup(struct be_adapter *adapter,
- struct be_net_object *pnob, struct net_device *netdev)
-{
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
-
- be_wait_nic_tx_cmplx_cmpl(pnob);
- be_disable_eq_intr(pnob);
-
- if (adapter->tasklet_started) {
- tasklet_kill(&adapter->sts_handler);
- adapter->tasklet_started = 0;
- }
-
- be_unregister_isr(adapter);
- be_disable_intr(pnob);
-
- be_tx_q_clean(pnob);
- be_rx_q_clean(pnob);
-
- be_destroy_netobj(pnob);
-}
-
-static int be_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct be_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdevp;
- struct be_net_object *pnob = netdev_priv(netdev);
-
- adapter->dev_pm_state = adapter->dev_state;
- adapter->dev_state = BE_DEV_STATE_SUSPEND;
-
- netif_device_detach(netdev);
- if (netif_running(netdev))
- be_pm_cleanup(adapter, pnob, netdev);
-
- pci_enable_wake(pdev, 3, 1);
- pci_enable_wake(pdev, 4, 1); /* D3 Cold = 4 */
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- return 0;
-}
-
-static void be_up(struct be_adapter *adapter)
-{
- struct be_net_object *pnob = adapter->net_obj;
-
- if (pnob->num_vlans != 0)
- be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
- pnob->vlan_tag, NULL, NULL, NULL);
-
-}
-
-static int be_resume(struct pci_dev *pdev)
-{
- int status = 0;
- struct be_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdevp;
- struct be_net_object *pnob = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- status = pci_enable_device(pdev);
- if (status)
- return status;
-
- pci_set_power_state(pdev, 0);
- pci_restore_state(pdev);
- pci_enable_wake(pdev, 3, 0);
- pci_enable_wake(pdev, 4, 0); /* 4 is D3 cold */
-
- netif_carrier_on(netdev);
- netif_start_queue(netdev);
-
- if (netif_running(netdev)) {
- be_rxf_mac_address_read_write(&pnob->fn_obj, false, false,
- false, true, false, netdev->dev_addr, NULL, NULL);
-
- status = be_nob_ring_init(adapter, pnob);
- if (status < 0)
- return status;
-
- tasklet_init(&(adapter->sts_handler), be_process_intr,
- (unsigned long)adapter);
- adapter->tasklet_started = 1;
-
- if (be_register_isr(adapter, pnob) != 0) {
- printk(KERN_ERR "be_register_isr failed\n");
- return status;
- }
-
-
- status = be_mcc_init(adapter);
- if (status < 0) {
- printk(KERN_ERR "be_mcc_init failed\n");
- return status;
- }
- be_update_link_status(adapter);
- /*
- * Register async call back function to handle link
- * status updates
- */
- status = be_mcc_add_async_event_callback(
- &adapter->net_obj->mcc_q_obj,
- be_link_status_async_callback, (void *)adapter);
- if (status != BE_SUCCESS) {
- printk(KERN_WARNING "add_async_event_callback failed");
- printk(KERN_WARNING
- "Link status changes may not be reflected\n");
- }
- be_enable_intr(pnob);
- be_enable_eq_intr(pnob);
- be_up(adapter);
- }
- netif_device_attach(netdev);
- adapter->dev_state = adapter->dev_pm_state;
- return 0;
-
-}
-
-#endif
-
-/* Wait until no more pending transmits */
-void be_wait_nic_tx_cmplx_cmpl(struct be_net_object *pnob)
-{
- int i;
-
- /* Wait for 20us * 50000 (= 1s) and no more */
- i = 0;
- while ((pnob->tx_q_tl != pnob->tx_q_hd) && (i < 50000)) {
- ++i;
- udelay(20);
- }
-
- /* Check for no more pending transmits */
- if (i >= 50000) {
- printk(KERN_WARNING
- "Did not receive completions for all TX requests\n");
- }
-}
-
-static struct pci_driver be_driver = {
- .name = be_driver_name,
- .id_table = be_device_id_table,
- .probe = be_probe,
-#ifdef CONFIG_PM
- .suspend = be_suspend,
- .resume = be_resume,
-#endif
- .remove = be_remove
-};
-
-/*
- * Module init entry point. Registers our our device and return.
- * Our probe will be called if the device is found.
- */
-static int __init be_init_module(void)
-{
- int ret;
-
- if (rxbuf_size != 8192 && rxbuf_size != 4096 && rxbuf_size != 2048) {
- printk(KERN_WARNING
- "Unsupported receive buffer size (%d) requested\n",
- rxbuf_size);
- printk(KERN_WARNING
- "Must be 2048, 4096 or 8192. Defaulting to 2048\n");
- rxbuf_size = 2048;
- }
-
- ret = pci_register_driver(&be_driver);
-
- return ret;
-}
-
-module_init(be_init_module);
-
-/*
- * be_exit_module - Driver Exit Cleanup Routine
- */
-static void __exit be_exit_module(void)
-{
- pci_unregister_driver(&be_driver);
-}
-
-module_exit(be_exit_module);
diff --git a/drivers/staging/benet/be_int.c b/drivers/staging/benet/be_int.c
deleted file mode 100644
index cba95d0..0000000
--- a/drivers/staging/benet/be_int.c
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/if_vlan.h>
-#include <linux/inet_lro.h>
-
-#include "benet.h"
-
-/* number of bytes of RX frame that are copied to skb->data */
-#define BE_HDR_LEN 64
-
-#define NETIF_RX(skb) netif_receive_skb(skb)
-#define VLAN_ACCEL_RX(skb, pnob, vt) \
- vlan_hwaccel_rx(skb, pnob->vlan_grp, vt)
-
-/*
- This function notifies BladeEngine of the number of completion
- entries processed from the specified completion queue by writing
- the number of popped entries to the door bell.
-
- pnob - Pointer to the NetObject structure
- n - Number of completion entries processed
- cq_id - Queue ID of the completion queue for which notification
- is being done.
- re_arm - 1 - rearm the completion ring to generate an event.
- - 0 - dont rearm the completion ring to generate an event
-*/
-void be_notify_cmpl(struct be_net_object *pnob, int n, int cq_id, int re_arm)
-{
- struct CQ_DB_AMAP cqdb;
-
- cqdb.dw[0] = 0;
- AMAP_SET_BITS_PTR(CQ_DB, qid, &cqdb, cq_id);
- AMAP_SET_BITS_PTR(CQ_DB, rearm, &cqdb, re_arm);
- AMAP_SET_BITS_PTR(CQ_DB, num_popped, &cqdb, n);
- PD_WRITE(&pnob->fn_obj, cq_db, cqdb.dw[0]);
-}
-
-/*
- * adds additional receive frags indicated by BE starting from given
- * frag index (fi) to specified skb's frag list
- */
-static void
-add_skb_frags(struct be_net_object *pnob, struct sk_buff *skb,
- u32 nresid, u32 fi)
-{
- struct be_adapter *adapter = pnob->adapter;
- u32 sk_frag_idx, n;
- struct be_rx_page_info *rx_page_info;
- u32 frag_sz = pnob->rx_buf_size;
-
- sk_frag_idx = skb_shinfo(skb)->nr_frags;
- while (nresid) {
- index_inc(&fi, pnob->rx_q_len);
-
- rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
- pnob->rx_ctxt[fi] = NULL;
- if ((rx_page_info->page_offset) ||
- (pnob->rx_pg_shared == false)) {
- pci_unmap_page(adapter->pdev,
- pci_unmap_addr(rx_page_info, bus),
- frag_sz, PCI_DMA_FROMDEVICE);
- }
-
- n = min(nresid, frag_sz);
- skb_shinfo(skb)->frags[sk_frag_idx].page = rx_page_info->page;
- skb_shinfo(skb)->frags[sk_frag_idx].page_offset
- = rx_page_info->page_offset;
- skb_shinfo(skb)->frags[sk_frag_idx].size = n;
-
- sk_frag_idx++;
- skb->len += n;
- skb->data_len += n;
- skb_shinfo(skb)->nr_frags++;
- nresid -= n;
-
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- atomic_dec(&pnob->rx_q_posted);
- }
-}
-
-/*
- * This function processes incoming nic packets over various Rx queues.
- * This function takes the adapter, the current Rx status descriptor
- * entry and the Rx completion queue ID as argument.
- */
-static inline int process_nic_rx_completion(struct be_net_object *pnob,
- struct ETH_RX_COMPL_AMAP *rxcp)
-{
- struct be_adapter *adapter = pnob->adapter;
- struct sk_buff *skb;
- int udpcksm, tcpcksm;
- int n;
- u32 nresid, fi;
- u32 frag_sz = pnob->rx_buf_size;
- u8 *va;
- struct be_rx_page_info *rx_page_info;
- u32 numfrags, vtp, vtm, vlan_tag, pktsize;
-
- fi = AMAP_GET_BITS_PTR(ETH_RX_COMPL, fragndx, rxcp);
- BUG_ON(fi >= (int)pnob->rx_q_len);
- BUG_ON(fi < 0);
-
- rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
- BUG_ON(!rx_page_info->page);
- pnob->rx_ctxt[fi] = NULL;
-
- /*
- * If one page is used per fragment or if this is the second half of
- * of the page, unmap the page here
- */
- if ((rx_page_info->page_offset) || (pnob->rx_pg_shared == false)) {
- pci_unmap_page(adapter->pdev,
- pci_unmap_addr(rx_page_info, bus), frag_sz,
- PCI_DMA_FROMDEVICE);
- }
-
- atomic_dec(&pnob->rx_q_posted);
- udpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, udpcksm, rxcp);
- tcpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, tcpcksm, rxcp);
- pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
- /*
- * get rid of RX flush completions first.
- */
- if ((tcpcksm) && (udpcksm) && (pktsize == 32)) {
- put_page(rx_page_info->page);
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- return 0;
- }
- skb = netdev_alloc_skb(pnob->netdev, BE_HDR_LEN + NET_IP_ALIGN);
- if (skb == NULL) {
- dev_info(&pnob->netdev->dev, "alloc_skb() failed\n");
- put_page(rx_page_info->page);
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- goto free_frags;
- }
- skb_reserve(skb, NET_IP_ALIGN);
-
- skb->dev = pnob->netdev;
-
- n = min(pktsize, frag_sz);
-
- va = page_address(rx_page_info->page) + rx_page_info->page_offset;
- prefetch(va);
-
- skb->len = n;
- skb->data_len = n;
- if (n <= BE_HDR_LEN) {
- memcpy(skb->data, va, n);
- put_page(rx_page_info->page);
- skb->data_len -= n;
- skb->tail += n;
- } else {
-
- /* Setup the SKB with page buffer information */
- skb_shinfo(skb)->frags[0].page = rx_page_info->page;
- skb_shinfo(skb)->nr_frags++;
-
- /* Copy the header into the skb_data */
- memcpy(skb->data, va, BE_HDR_LEN);
- skb_shinfo(skb)->frags[0].page_offset =
- rx_page_info->page_offset + BE_HDR_LEN;
- skb_shinfo(skb)->frags[0].size = n - BE_HDR_LEN;
- skb->data_len -= BE_HDR_LEN;
- skb->tail += BE_HDR_LEN;
- }
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- nresid = pktsize - n;
-
- skb->protocol = eth_type_trans(skb, pnob->netdev);
-
- if ((tcpcksm || udpcksm) && adapter->rx_csum)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- else
- skb->ip_summed = CHECKSUM_NONE;
- /*
- * if we have more bytes left, the frame has been
- * given to us in multiple fragments. This happens
- * with Jumbo frames. Add the remaining fragments to
- * skb->frags[] array.
- */
- if (nresid)
- add_skb_frags(pnob, skb, nresid, fi);
-
- /* update the the true size of the skb. */
- skb->truesize = skb->len + sizeof(struct sk_buff);
-
- /*
- * If a 802.3 frame or 802.2 LLC frame
- * (i.e) contains length field in MAC Hdr
- * and frame len is greater than 64 bytes
- */
- if (((skb->protocol == ntohs(ETH_P_802_2)) ||
- (skb->protocol == ntohs(ETH_P_802_3)))
- && (pktsize > BE_HDR_LEN)) {
- /*
- * If the length given in Mac Hdr is less than frame size
- * Erraneous frame, Drop it
- */
- if ((ntohs(*(u16 *) (va + 12)) + ETH_HLEN) < pktsize) {
- /* Increment Non Ether type II frames dropped */
- adapter->be_stat.bes_802_3_dropped_frames++;
-
- kfree_skb(skb);
- return 0;
- }
- /*
- * else if the length given in Mac Hdr is greater than
- * frame size, should not be seeing this sort of frames
- * dump the pkt and pass to stack
- */
- else if ((ntohs(*(u16 *) (va + 12)) + ETH_HLEN) > pktsize) {
- /* Increment Non Ether type II frames malformed */
- adapter->be_stat.bes_802_3_malformed_frames++;
- }
- }
-
- vtp = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtp, rxcp);
- vtm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtm, rxcp);
- if (vtp && vtm) {
- /* Vlan tag present in pkt and BE found
- * that the tag matched an entry in VLAN table
- */
- if (!pnob->vlan_grp || pnob->num_vlans == 0) {
- /* But we have no VLANs configured.
- * This should never happen. Drop the packet.
- */
- dev_info(&pnob->netdev->dev,
- "BladeEngine: Unexpected vlan tagged packet\n");
- kfree_skb(skb);
- return 0;
- }
- /* pass the VLAN packet to stack */
- vlan_tag = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vlan_tag, rxcp);
- VLAN_ACCEL_RX(skb, pnob, be16_to_cpu(vlan_tag));
-
- } else {
- NETIF_RX(skb);
- }
- return 0;
-
-free_frags:
- /* free all frags associated with the current rxcp */
- numfrags = AMAP_GET_BITS_PTR(ETH_RX_COMPL, numfrags, rxcp);
- while (numfrags-- > 1) {
- index_inc(&fi, pnob->rx_q_len);
-
- rx_page_info = (struct be_rx_page_info *)
- pnob->rx_ctxt[fi];
- pnob->rx_ctxt[fi] = (void *)NULL;
- if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
- pci_unmap_page(adapter->pdev,
- pci_unmap_addr(rx_page_info, bus),
- frag_sz, PCI_DMA_FROMDEVICE);
- }
-
- put_page(rx_page_info->page);
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- atomic_dec(&pnob->rx_q_posted);
- }
- return -ENOMEM;
-}
-
-static void process_nic_rx_completion_lro(struct be_net_object *pnob,
- struct ETH_RX_COMPL_AMAP *rxcp)
-{
- struct be_adapter *adapter = pnob->adapter;
- struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
- unsigned int udpcksm, tcpcksm;
- u32 numfrags, vlanf, vtm, vlan_tag, nresid;
- u16 vlant;
- unsigned int fi, idx, n;
- struct be_rx_page_info *rx_page_info;
- u32 frag_sz = pnob->rx_buf_size, pktsize;
- bool rx_coal = (adapter->max_rx_coal <= 1) ? 0 : 1;
- u8 err, *va;
- __wsum csum = 0;
-
- if (AMAP_GET_BITS_PTR(ETH_RX_COMPL, ipsec, rxcp)) {
- /* Drop the pkt and move to the next completion. */
- adapter->be_stat.bes_rx_misc_pkts++;
- return;
- }
- err = AMAP_GET_BITS_PTR(ETH_RX_COMPL, err, rxcp);
- if (err || !rx_coal) {
- /* We won't coalesce Rx pkts if the err bit set.
- * take the path of normal completion processing */
- process_nic_rx_completion(pnob, rxcp);
- return;
- }
-
- fi = AMAP_GET_BITS_PTR(ETH_RX_COMPL, fragndx, rxcp);
- BUG_ON(fi >= (int)pnob->rx_q_len);
- BUG_ON(fi < 0);
- rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
- BUG_ON(!rx_page_info->page);
- pnob->rx_ctxt[fi] = (void *)NULL;
- /* If one page is used per fragment or if this is the
- * second half of the page, unmap the page here
- */
- if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
- pci_unmap_page(adapter->pdev,
- pci_unmap_addr(rx_page_info, bus),
- frag_sz, PCI_DMA_FROMDEVICE);
- }
-
- numfrags = AMAP_GET_BITS_PTR(ETH_RX_COMPL, numfrags, rxcp);
- udpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, udpcksm, rxcp);
- tcpcksm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, tcpcksm, rxcp);
- vlan_tag = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vlan_tag, rxcp);
- vlant = be16_to_cpu(vlan_tag);
- vlanf = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtp, rxcp);
- vtm = AMAP_GET_BITS_PTR(ETH_RX_COMPL, vtm, rxcp);
- pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
-
- atomic_dec(&pnob->rx_q_posted);
-
- if (tcpcksm && udpcksm && pktsize == 32) {
- /* flush completion entries */
- put_page(rx_page_info->page);
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- return;
- }
- /* Only one of udpcksum and tcpcksum can be set */
- BUG_ON(udpcksm && tcpcksm);
-
- /* jumbo frames could come in multiple fragments */
- BUG_ON(numfrags != ((pktsize + (frag_sz - 1)) / frag_sz));
- n = min(pktsize, frag_sz);
- nresid = pktsize - n; /* will be useful for jumbo pkts */
- idx = 0;
-
- va = page_address(rx_page_info->page) + rx_page_info->page_offset;
- prefetch(va);
- rx_frags[idx].page = rx_page_info->page;
- rx_frags[idx].page_offset = (rx_page_info->page_offset);
- rx_frags[idx].size = n;
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
-
- /* If we got multiple fragments, we have more data. */
- while (nresid) {
- idx++;
- index_inc(&fi, pnob->rx_q_len);
-
- rx_page_info = (struct be_rx_page_info *)pnob->rx_ctxt[fi];
- pnob->rx_ctxt[fi] = (void *)NULL;
- if (rx_page_info->page_offset || !pnob->rx_pg_shared) {
- pci_unmap_page(adapter->pdev,
- pci_unmap_addr(rx_page_info, bus),
- frag_sz, PCI_DMA_FROMDEVICE);
- }
-
- n = min(nresid, frag_sz);
- rx_frags[idx].page = rx_page_info->page;
- rx_frags[idx].page_offset = (rx_page_info->page_offset);
- rx_frags[idx].size = n;
-
- nresid -= n;
- memset(rx_page_info, 0, sizeof(struct be_rx_page_info));
- atomic_dec(&pnob->rx_q_posted);
- }
-
- if (likely(!(vlanf && vtm))) {
- lro_receive_frags(&pnob->lro_mgr, rx_frags,
- pktsize, pktsize,
- (void *)(unsigned long)csum, csum);
- } else {
- /* Vlan tag present in pkt and BE found
- * that the tag matched an entry in VLAN table
- */
- if (unlikely(!pnob->vlan_grp || pnob->num_vlans == 0)) {
- /* But we have no VLANs configured.
- * This should never happen. Drop the packet.
- */
- dev_info(&pnob->netdev->dev,
- "BladeEngine: Unexpected vlan tagged packet\n");
- return;
- }
- /* pass the VLAN packet to stack */
- lro_vlan_hwaccel_receive_frags(&pnob->lro_mgr,
- rx_frags, pktsize, pktsize,
- pnob->vlan_grp, vlant,
- (void *)(unsigned long)csum,
- csum);
- }
-
- adapter->be_stat.bes_rx_coal++;
-}
-
-struct ETH_RX_COMPL_AMAP *be_get_rx_cmpl(struct be_net_object *pnob)
-{
- struct ETH_RX_COMPL_AMAP *rxcp = &pnob->rx_cq[pnob->rx_cq_tl];
- u32 valid, ct;
-
- valid = AMAP_GET_BITS_PTR(ETH_RX_COMPL, valid, rxcp);
- if (valid == 0)
- return NULL;
-
- ct = AMAP_GET_BITS_PTR(ETH_RX_COMPL, ct, rxcp);
- if (ct != 0) {
- /* Invalid chute #. treat as error */
- AMAP_SET_BITS_PTR(ETH_RX_COMPL, err, rxcp, 1);
- }
-
- be_adv_rxcq_tl(pnob);
- AMAP_SET_BITS_PTR(ETH_RX_COMPL, valid, rxcp, 0);
- return rxcp;
-}
-
-static void update_rx_rate(struct be_adapter *adapter)
-{
- /* update the rate once in two seconds */
- if ((jiffies - adapter->eth_rx_jiffies) > 2 * (HZ)) {
- u32 r;
- r = adapter->eth_rx_bytes /
- ((jiffies - adapter->eth_rx_jiffies) / (HZ));
- r = (r / 1000000); /* MB/Sec */
-
- /* Mega Bits/Sec */
- adapter->be_stat.bes_eth_rx_rate = (r * 8);
- adapter->eth_rx_jiffies = jiffies;
- adapter->eth_rx_bytes = 0;
- }
-}
-
-static int process_rx_completions(struct be_net_object *pnob, int max_work)
-{
- struct be_adapter *adapter = pnob->adapter;
- struct ETH_RX_COMPL_AMAP *rxcp;
- u32 nc = 0;
- unsigned int pktsize;
-
- while (max_work && (rxcp = be_get_rx_cmpl(pnob))) {
- prefetch(rxcp);
- pktsize = AMAP_GET_BITS_PTR(ETH_RX_COMPL, pktsize, rxcp);
- process_nic_rx_completion_lro(pnob, rxcp);
- adapter->eth_rx_bytes += pktsize;
- update_rx_rate(adapter);
- nc++;
- max_work--;
- adapter->be_stat.bes_rx_compl++;
- }
- if (likely(adapter->max_rx_coal > 1)) {
- adapter->be_stat.bes_rx_flush++;
- lro_flush_all(&pnob->lro_mgr);
- }
-
- /* Refill the queue */
- if (atomic_read(&pnob->rx_q_posted) < 900)
- be_post_eth_rx_buffs(pnob);
-
- return nc;
-}
-
-static struct ETH_TX_COMPL_AMAP *be_get_tx_cmpl(struct be_net_object *pnob)
-{
- struct ETH_TX_COMPL_AMAP *txcp = &pnob->tx_cq[pnob->tx_cq_tl];
- u32 valid;
-
- valid = AMAP_GET_BITS_PTR(ETH_TX_COMPL, valid, txcp);
- if (valid == 0)
- return NULL;
-
- AMAP_SET_BITS_PTR(ETH_TX_COMPL, valid, txcp, 0);
- be_adv_txcq_tl(pnob);
- return txcp;
-
-}
-
-void process_one_tx_compl(struct be_net_object *pnob, u32 end_idx)
-{
- struct be_adapter *adapter = pnob->adapter;
- int cur_index, tx_wrbs_completed = 0;
- struct sk_buff *skb;
- u64 busaddr, pa, pa_lo, pa_hi;
- struct ETH_WRB_AMAP *wrb;
- u32 frag_len, last_index, j;
-
- last_index = tx_compl_lastwrb_idx_get(pnob);
- BUG_ON(last_index != end_idx);
- pnob->tx_ctxt[pnob->tx_q_tl] = NULL;
- do {
- cur_index = pnob->tx_q_tl;
- wrb = &pnob->tx_q[cur_index];
- pa_hi = AMAP_GET_BITS_PTR(ETH_WRB, frag_pa_hi, wrb);
- pa_lo = AMAP_GET_BITS_PTR(ETH_WRB, frag_pa_lo, wrb);
- frag_len = AMAP_GET_BITS_PTR(ETH_WRB, frag_len, wrb);
- busaddr = (pa_hi << 32) | pa_lo;
- if (busaddr != 0) {
- pa = le64_to_cpu(busaddr);
- pci_unmap_single(adapter->pdev, pa,
- frag_len, PCI_DMA_TODEVICE);
- }
- if (cur_index == last_index) {
- skb = (struct sk_buff *)pnob->tx_ctxt[cur_index];
- BUG_ON(!skb);
- for (j = 0; j < skb_shinfo(skb)->nr_frags; j++) {
- struct skb_frag_struct *frag;
- frag = &skb_shinfo(skb)->frags[j];
- pci_unmap_page(adapter->pdev,
- (ulong) frag->page, frag->size,
- PCI_DMA_TODEVICE);
- }
- kfree_skb(skb);
- pnob->tx_ctxt[cur_index] = NULL;
- } else {
- BUG_ON(pnob->tx_ctxt[cur_index]);
- }
- tx_wrbs_completed++;
- be_adv_txq_tl(pnob);
- } while (cur_index != last_index);
- atomic_sub(tx_wrbs_completed, &pnob->tx_q_used);
-}
-
-/* there is no need to take an SMP lock here since currently
- * we have only one instance of the tasklet that does completion
- * processing.
- */
-static void process_nic_tx_completions(struct be_net_object *pnob)
-{
- struct be_adapter *adapter = pnob->adapter;
- struct ETH_TX_COMPL_AMAP *txcp;
- struct net_device *netdev = pnob->netdev;
- u32 end_idx, num_processed = 0;
-
- adapter->be_stat.bes_tx_events++;
-
- while ((txcp = be_get_tx_cmpl(pnob))) {
- end_idx = AMAP_GET_BITS_PTR(ETH_TX_COMPL, wrb_index, txcp);
- process_one_tx_compl(pnob, end_idx);
- num_processed++;
- adapter->be_stat.bes_tx_compl++;
- }
- be_notify_cmpl(pnob, num_processed, pnob->tx_cq_id, 1);
- /*
- * We got Tx completions and have usable WRBs.
- * If the netdev's queue has been stopped
- * because we had run out of WRBs, wake it now.
- */
- spin_lock(&adapter->txq_lock);
- if (netif_queue_stopped(netdev)
- && atomic_read(&pnob->tx_q_used) < pnob->tx_q_len / 2) {
- netif_wake_queue(netdev);
- }
- spin_unlock(&adapter->txq_lock);
-}
-
-static u32 post_rx_buffs(struct be_net_object *pnob, struct list_head *rxbl)
-{
- u32 nposted = 0;
- struct ETH_RX_D_AMAP *rxd = NULL;
- struct be_recv_buffer *rxbp;
- void **rx_ctxp;
- struct RQ_DB_AMAP rqdb;
-
- rx_ctxp = pnob->rx_ctxt;
-
- while (!list_empty(rxbl) &&
- (rx_ctxp[pnob->rx_q_hd] == NULL) && nposted < 255) {
-
- rxbp = list_first_entry(rxbl, struct be_recv_buffer, rxb_list);
- list_del(&rxbp->rxb_list);
- rxd = pnob->rx_q + pnob->rx_q_hd;
- AMAP_SET_BITS_PTR(ETH_RX_D, fragpa_lo, rxd, rxbp->rxb_pa_lo);
- AMAP_SET_BITS_PTR(ETH_RX_D, fragpa_hi, rxd, rxbp->rxb_pa_hi);
-
- rx_ctxp[pnob->rx_q_hd] = rxbp->rxb_ctxt;
- be_adv_rxq_hd(pnob);
- nposted++;
- }
-
- if (nposted) {
- /* Now press the door bell to notify BladeEngine. */
- rqdb.dw[0] = 0;
- AMAP_SET_BITS_PTR(RQ_DB, numPosted, &rqdb, nposted);
- AMAP_SET_BITS_PTR(RQ_DB, rq, &rqdb, pnob->rx_q_id);
- PD_WRITE(&pnob->fn_obj, erx_rq_db, rqdb.dw[0]);
- }
- atomic_add(nposted, &pnob->rx_q_posted);
- return nposted;
-}
-
-void be_post_eth_rx_buffs(struct be_net_object *pnob)
-{
- struct be_adapter *adapter = pnob->adapter;
- u32 num_bufs, r;
- u64 busaddr = 0, tmp_pa;
- u32 max_bufs, pg_hd;
- u32 frag_size;
- struct be_recv_buffer *rxbp;
- struct list_head rxbl;
- struct be_rx_page_info *rx_page_info;
- struct page *page = NULL;
- u32 page_order = 0;
- gfp_t alloc_flags = GFP_ATOMIC;
-
- BUG_ON(!adapter);
-
- max_bufs = 64; /* should be even # <= 255. */
-
- frag_size = pnob->rx_buf_size;
- page_order = get_order(frag_size);
-
- if (frag_size == 8192)
- alloc_flags |= (gfp_t) __GFP_COMP;
- /*
- * Form a linked list of RECV_BUFFFER structure to be be posted.
- * We will post even number of buffer so that pages can be
- * shared.
- */
- INIT_LIST_HEAD(&rxbl);
-
- for (num_bufs = 0; num_bufs < max_bufs &&
- !pnob->rx_page_info[pnob->rx_pg_info_hd].page; ++num_bufs) {
-
- rxbp = &pnob->eth_rx_bufs[num_bufs];
- pg_hd = pnob->rx_pg_info_hd;
- rx_page_info = &pnob->rx_page_info[pg_hd];
-
- if (!page) {
- page = alloc_pages(alloc_flags, page_order);
- if (unlikely(page == NULL)) {
- adapter->be_stat.bes_ethrx_post_fail++;
- pnob->rxbuf_post_fail++;
- break;
- }
- pnob->rxbuf_post_fail = 0;
- busaddr = pci_map_page(adapter->pdev, page, 0,
- frag_size, PCI_DMA_FROMDEVICE);
- rx_page_info->page_offset = 0;
- rx_page_info->page = page;
- /*
- * If we are sharing a page among two skbs,
- * alloc a new one on the next iteration
- */
- if (pnob->rx_pg_shared == false)
- page = NULL;
- } else {
- get_page(page);
- rx_page_info->page_offset += frag_size;
- rx_page_info->page = page;
- /*
- * We are finished with the alloced page,
- * Alloc a new one on the next iteration
- */
- page = NULL;
- }
- rxbp->rxb_ctxt = (void *)rx_page_info;
- index_inc(&pnob->rx_pg_info_hd, pnob->rx_q_len);
-
- pci_unmap_addr_set(rx_page_info, bus, busaddr);
- tmp_pa = busaddr + rx_page_info->page_offset;
- rxbp->rxb_pa_lo = (tmp_pa & 0xFFFFFFFF);
- rxbp->rxb_pa_hi = (tmp_pa >> 32);
- rxbp->rxb_len = frag_size;
- list_add_tail(&rxbp->rxb_list, &rxbl);
- } /* End of for */
-
- r = post_rx_buffs(pnob, &rxbl);
- BUG_ON(r != num_bufs);
- return;
-}
-
-/*
- * Interrupt service for network function. We just schedule the
- * tasklet which does all completion processing.
- */
-irqreturn_t be_int(int irq, void *dev)
-{
- struct net_device *netdev = dev;
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
- u32 isr;
-
- isr = CSR_READ(&pnob->fn_obj, cev.isr1);
- if (unlikely(!isr))
- return IRQ_NONE;
-
- spin_lock(&adapter->int_lock);
- adapter->isr |= isr;
- spin_unlock(&adapter->int_lock);
-
- adapter->be_stat.bes_ints++;
-
- tasklet_schedule(&adapter->sts_handler);
- return IRQ_HANDLED;
-}
-
-/*
- * Poll function called by NAPI with a work budget.
- * We process as many UC. BC and MC receive completions
- * as the budget allows and return the actual number of
- * RX ststutses processed.
- */
-int be_poll(struct napi_struct *napi, int budget)
-{
- struct be_net_object *pnob =
- container_of(napi, struct be_net_object, napi);
- u32 work_done;
-
- pnob->adapter->be_stat.bes_polls++;
- work_done = process_rx_completions(pnob, budget);
- BUG_ON(work_done > budget);
-
- /* All consumed */
- if (work_done < budget) {
- netif_rx_complete(napi);
- /* enable intr */
- be_notify_cmpl(pnob, work_done, pnob->rx_cq_id, 1);
- } else {
- /* More to be consumed; continue with interrupts disabled */
- be_notify_cmpl(pnob, work_done, pnob->rx_cq_id, 0);
- }
- return work_done;
-}
-
-static struct EQ_ENTRY_AMAP *get_event(struct be_net_object *pnob)
-{
- struct EQ_ENTRY_AMAP *eqp = &(pnob->event_q[pnob->event_q_tl]);
- if (!AMAP_GET_BITS_PTR(EQ_ENTRY, Valid, eqp))
- return NULL;
- be_adv_eq_tl(pnob);
- return eqp;
-}
-
-/*
- * Processes all valid events in the event ring associated with given
- * NetObject. Also, notifies BE the number of events processed.
- */
-static inline u32 process_events(struct be_net_object *pnob)
-{
- struct be_adapter *adapter = pnob->adapter;
- struct EQ_ENTRY_AMAP *eqp;
- u32 rid, num_events = 0;
- struct net_device *netdev = pnob->netdev;
-
- while ((eqp = get_event(pnob)) != NULL) {
- adapter->be_stat.bes_events++;
- rid = AMAP_GET_BITS_PTR(EQ_ENTRY, ResourceID, eqp);
- if (rid == pnob->rx_cq_id) {
- adapter->be_stat.bes_rx_events++;
- netif_rx_schedule(&pnob->napi);
- } else if (rid == pnob->tx_cq_id) {
- process_nic_tx_completions(pnob);
- } else if (rid == pnob->mcc_cq_id) {
- be_mcc_process_cq(&pnob->mcc_q_obj, 1);
- } else {
- dev_info(&netdev->dev,
- "Invalid EQ ResourceID %d\n", rid);
- }
- AMAP_SET_BITS_PTR(EQ_ENTRY, Valid, eqp, 0);
- AMAP_SET_BITS_PTR(EQ_ENTRY, ResourceID, eqp, 0);
- num_events++;
- }
- return num_events;
-}
-
-static void update_eqd(struct be_adapter *adapter, struct be_net_object *pnob)
-{
- int status;
- struct be_eq_object *eq_objectp;
-
- /* update once a second */
- if ((jiffies - adapter->ips_jiffies) > 1 * (HZ)) {
- /* One second elapsed since last update */
- u32 r, new_eqd = -1;
- r = adapter->be_stat.bes_ints - adapter->be_stat.bes_prev_ints;
- r = r / ((jiffies - adapter->ips_jiffies) / (HZ));
- adapter->be_stat.bes_ips = r;
- adapter->ips_jiffies = jiffies;
- adapter->be_stat.bes_prev_ints = adapter->be_stat.bes_ints;
- if (r > IPS_HI_WM && adapter->cur_eqd < adapter->max_eqd)
- new_eqd = (adapter->cur_eqd + 8);
- if (r < IPS_LO_WM && adapter->cur_eqd > adapter->min_eqd)
- new_eqd = (adapter->cur_eqd - 8);
- if (adapter->enable_aic && new_eqd != -1) {
- eq_objectp = &pnob->event_q_obj;
- status = be_eq_modify_delay(&pnob->fn_obj, 1,
- &eq_objectp, &new_eqd, NULL,
- NULL, NULL);
- if (status == BE_SUCCESS)
- adapter->cur_eqd = new_eqd;
- }
- }
-}
-
-/*
- This function notifies BladeEngine of how many events were processed
- from the event queue by ringing the corresponding door bell and
- optionally re-arms the event queue.
- n - number of events processed
- re_arm - 1 - re-arm the EQ, 0 - do not re-arm the EQ
-
-*/
-static void be_notify_event(struct be_net_object *pnob, int n, int re_arm)
-{
- struct CQ_DB_AMAP eqdb;
- eqdb.dw[0] = 0;
-
- AMAP_SET_BITS_PTR(CQ_DB, qid, &eqdb, pnob->event_q_id);
- AMAP_SET_BITS_PTR(CQ_DB, rearm, &eqdb, re_arm);
- AMAP_SET_BITS_PTR(CQ_DB, event, &eqdb, 1);
- AMAP_SET_BITS_PTR(CQ_DB, num_popped, &eqdb, n);
- /*
- * Under some situations we see an interrupt and no valid
- * EQ entry. To keep going, we need to ring the DB even if
- * numPOsted is 0.
- */
- PD_WRITE(&pnob->fn_obj, cq_db, eqdb.dw[0]);
- return;
-}
-
-/*
- * Called from the tasklet scheduled by ISR. All real interrupt processing
- * is done here.
- */
-void be_process_intr(unsigned long context)
-{
- struct be_adapter *adapter = (struct be_adapter *)context;
- struct be_net_object *pnob = adapter->net_obj;
- u32 isr, n;
- ulong flags = 0;
-
- isr = adapter->isr;
-
- /*
- * we create only one NIC event queue in Linux. Event is
- * expected only in the first event queue
- */
- BUG_ON(isr & 0xfffffffe);
- if ((isr & 1) == 0)
- return; /* not our interrupt */
- n = process_events(pnob);
- /*
- * Clear the event bit. adapter->isr is set by
- * hard interrupt. Prevent race with lock.
- */
- spin_lock_irqsave(&adapter->int_lock, flags);
- adapter->isr &= ~1;
- spin_unlock_irqrestore(&adapter->int_lock, flags);
- be_notify_event(pnob, n, 1);
- /*
- * If previous allocation attempts had failed and
- * BE has used up all posted buffers, post RX buffers here
- */
- if (pnob->rxbuf_post_fail && atomic_read(&pnob->rx_q_posted) == 0)
- be_post_eth_rx_buffs(pnob);
- update_eqd(adapter, pnob);
- return;
-}
diff --git a/drivers/staging/benet/be_netif.c b/drivers/staging/benet/be_netif.c
deleted file mode 100644
index 2b8daf6..0000000
--- a/drivers/staging/benet/be_netif.c
+++ /dev/null
@@ -1,705 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * be_netif.c
- *
- * This file contains various entry points of drivers seen by tcp/ip stack.
- */
-
-#include <linux/if_vlan.h>
-#include <linux/in.h>
-#include "benet.h"
-#include <linux/ip.h>
-#include <linux/inet_lro.h>
-
-/* Strings to print Link properties */
-static const char *link_speed[] = {
- "Invalid link Speed Value",
- "10 Mbps",
- "100 Mbps",
- "1 Gbps",
- "10 Gbps"
-};
-
-static const char *link_duplex[] = {
- "Invalid Duplex Value",
- "Half Duplex",
- "Full Duplex"
-};
-
-static const char *link_state[] = {
- "",
- "(active)"
-};
-
-void be_print_link_info(struct BE_LINK_STATUS *lnk_status)
-{
- u16 si, di, ai;
-
- /* Port 0 */
- if (lnk_status->mac0_speed && lnk_status->mac0_duplex) {
- /* Port is up and running */
- si = (lnk_status->mac0_speed < 5) ? lnk_status->mac0_speed : 0;
- di = (lnk_status->mac0_duplex < 3) ?
- lnk_status->mac0_duplex : 0;
- ai = (lnk_status->active_port == 0) ? 1 : 0;
- printk(KERN_INFO "PortNo. 0: Speed - %s %s %s\n",
- link_speed[si], link_duplex[di], link_state[ai]);
- } else
- printk(KERN_INFO "PortNo. 0: Down\n");
-
- /* Port 1 */
- if (lnk_status->mac1_speed && lnk_status->mac1_duplex) {
- /* Port is up and running */
- si = (lnk_status->mac1_speed < 5) ? lnk_status->mac1_speed : 0;
- di = (lnk_status->mac1_duplex < 3) ?
- lnk_status->mac1_duplex : 0;
- ai = (lnk_status->active_port == 0) ? 1 : 0;
- printk(KERN_INFO "PortNo. 1: Speed - %s %s %s\n",
- link_speed[si], link_duplex[di], link_state[ai]);
- } else
- printk(KERN_INFO "PortNo. 1: Down\n");
-
- return;
-}
-
-static int
-be_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
- void **ip_hdr, void **tcpudp_hdr,
- u64 *hdr_flags, void *priv)
-{
- struct ethhdr *eh;
- struct vlan_ethhdr *veh;
- struct iphdr *iph;
- u8 *va = page_address(frag->page) + frag->page_offset;
- unsigned long ll_hlen;
-
- /* find the mac header, abort if not IPv4 */
-
- prefetch(va);
- eh = (struct ethhdr *)va;
- *mac_hdr = eh;
- ll_hlen = ETH_HLEN;
- if (eh->h_proto != htons(ETH_P_IP)) {
- if (eh->h_proto == htons(ETH_P_8021Q)) {
- veh = (struct vlan_ethhdr *)va;
- if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
- return -1;
-
- ll_hlen += VLAN_HLEN;
-
- } else {
- return -1;
- }
- }
- *hdr_flags = LRO_IPV4;
-
- iph = (struct iphdr *)(va + ll_hlen);
- *ip_hdr = iph;
- if (iph->protocol != IPPROTO_TCP)
- return -1;
- *hdr_flags |= LRO_TCP;
- *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
-
- return 0;
-}
-
-static int benet_open(struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
- struct net_lro_mgr *lro_mgr;
-
- if (adapter->dev_state < BE_DEV_STATE_INIT)
- return -EAGAIN;
-
- lro_mgr = &pnob->lro_mgr;
- lro_mgr->dev = netdev;
-
- lro_mgr->features = LRO_F_NAPI;
- lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
- lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
- lro_mgr->max_desc = BE_MAX_LRO_DESCRIPTORS;
- lro_mgr->lro_arr = pnob->lro_desc;
- lro_mgr->get_frag_header = be_get_frag_header;
- lro_mgr->max_aggr = adapter->max_rx_coal;
- lro_mgr->frag_align_pad = 2;
- if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
- lro_mgr->max_aggr = MAX_SKB_FRAGS;
-
- adapter->max_rx_coal = BE_LRO_MAX_PKTS;
-
- be_update_link_status(adapter);
-
- /*
- * Set carrier on only if Physical Link up
- * Either of the port link status up signifies this
- */
- if ((adapter->port0_link_sts == BE_PORT_LINK_UP) ||
- (adapter->port1_link_sts == BE_PORT_LINK_UP)) {
- netif_start_queue(netdev);
- netif_carrier_on(netdev);
- }
-
- adapter->dev_state = BE_DEV_STATE_OPEN;
- napi_enable(&pnob->napi);
- be_enable_intr(pnob);
- be_enable_eq_intr(pnob);
- /*
- * RX completion queue may be in dis-armed state. Arm it.
- */
- be_notify_cmpl(pnob, 0, pnob->rx_cq_id, 1);
-
- return 0;
-}
-
-static int benet_close(struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
-
- netif_stop_queue(netdev);
- synchronize_irq(netdev->irq);
-
- be_wait_nic_tx_cmplx_cmpl(pnob);
- adapter->dev_state = BE_DEV_STATE_INIT;
- netif_carrier_off(netdev);
-
- adapter->port0_link_sts = BE_PORT_LINK_DOWN;
- adapter->port1_link_sts = BE_PORT_LINK_DOWN;
- be_disable_intr(pnob);
- be_disable_eq_intr(pnob);
- napi_disable(&pnob->napi);
-
- return 0;
-}
-
-/*
- * Setting a Mac Address for BE
- * Takes netdev and a void pointer as arguments.
- * The pointer holds the new addres to be used.
- */
-static int benet_set_mac_addr(struct net_device *netdev, void *p)
-{
- struct sockaddr *addr = p;
- struct be_net_object *pnob = netdev_priv(netdev);
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- be_rxf_mac_address_read_write(&pnob->fn_obj, 0, 0, false, true, false,
- netdev->dev_addr, NULL, NULL);
- /*
- * Since we are doing Active-Passive failover, both
- * ports should have matching MAC addresses everytime.
- */
- be_rxf_mac_address_read_write(&pnob->fn_obj, 1, 0, false, true, false,
- netdev->dev_addr, NULL, NULL);
-
- return 0;
-}
-
-void be_get_stats_timer_handler(unsigned long context)
-{
- struct be_timer_ctxt *ctxt = (struct be_timer_ctxt *)context;
-
- if (atomic_read(&ctxt->get_stat_flag)) {
- atomic_dec(&ctxt->get_stat_flag);
- up((void *)ctxt->get_stat_sem_addr);
- }
- del_timer(&ctxt->get_stats_timer);
- return;
-}
-
-void be_get_stat_cb(void *context, int status,
- struct MCC_WRB_AMAP *optional_wrb)
-{
- struct be_timer_ctxt *ctxt = (struct be_timer_ctxt *)context;
- /*
- * just up the semaphore if the get_stat_flag
- * reads 1. so that the waiter can continue.
- * If it is 0, then it was handled by the timer handler.
- */
- del_timer(&ctxt->get_stats_timer);
- if (atomic_read(&ctxt->get_stat_flag)) {
- atomic_dec(&ctxt->get_stat_flag);
- up((void *)ctxt->get_stat_sem_addr);
- }
-}
-
-struct net_device_stats *benet_get_stats(struct net_device *dev)
-{
- struct be_net_object *pnob = netdev_priv(dev);
- struct be_adapter *adapter = pnob->adapter;
- u64 pa;
- struct be_timer_ctxt *ctxt = &adapter->timer_ctxt;
-
- if (adapter->dev_state != BE_DEV_STATE_OPEN) {
- /* Return previously read stats */
- return &(adapter->benet_stats);
- }
- /* Get Physical Addr */
- pa = pci_map_single(adapter->pdev, adapter->eth_statsp,
- sizeof(struct FWCMD_ETH_GET_STATISTICS),
- PCI_DMA_FROMDEVICE);
- ctxt->get_stat_sem_addr = (unsigned long)&adapter->get_eth_stat_sem;
- atomic_inc(&ctxt->get_stat_flag);
-
- be_rxf_query_eth_statistics(&pnob->fn_obj, adapter->eth_statsp,
- cpu_to_le64(pa), be_get_stat_cb, ctxt,
- NULL);
-
- ctxt->get_stats_timer.data = (unsigned long)ctxt;
- mod_timer(&ctxt->get_stats_timer, (jiffies + (HZ * 2)));
- down((void *)ctxt->get_stat_sem_addr); /* callback will unblock us */
-
- /* Adding port0 and port1 stats. */
- adapter->benet_stats.rx_packets =
- adapter->eth_statsp->params.response.p0recvdtotalframes +
- adapter->eth_statsp->params.response.p1recvdtotalframes;
- adapter->benet_stats.tx_packets =
- adapter->eth_statsp->params.response.p0xmitunicastframes +
- adapter->eth_statsp->params.response.p1xmitunicastframes;
- adapter->benet_stats.tx_bytes =
- adapter->eth_statsp->params.response.p0xmitbyteslsd +
- adapter->eth_statsp->params.response.p1xmitbyteslsd;
- adapter->benet_stats.rx_errors =
- adapter->eth_statsp->params.response.p0crcerrors +
- adapter->eth_statsp->params.response.p1crcerrors;
- adapter->benet_stats.rx_errors +=
- adapter->eth_statsp->params.response.p0alignmentsymerrs +
- adapter->eth_statsp->params.response.p1alignmentsymerrs;
- adapter->benet_stats.rx_errors +=
- adapter->eth_statsp->params.response.p0inrangelenerrors +
- adapter->eth_statsp->params.response.p1inrangelenerrors;
- adapter->benet_stats.rx_bytes =
- adapter->eth_statsp->params.response.p0recvdtotalbytesLSD +
- adapter->eth_statsp->params.response.p1recvdtotalbytesLSD;
- adapter->benet_stats.rx_crc_errors =
- adapter->eth_statsp->params.response.p0crcerrors +
- adapter->eth_statsp->params.response.p1crcerrors;
-
- adapter->benet_stats.tx_packets +=
- adapter->eth_statsp->params.response.p0xmitmulticastframes +
- adapter->eth_statsp->params.response.p1xmitmulticastframes;
- adapter->benet_stats.tx_packets +=
- adapter->eth_statsp->params.response.p0xmitbroadcastframes +
- adapter->eth_statsp->params.response.p1xmitbroadcastframes;
- adapter->benet_stats.tx_errors = 0;
-
- adapter->benet_stats.multicast =
- adapter->eth_statsp->params.response.p0xmitmulticastframes +
- adapter->eth_statsp->params.response.p1xmitmulticastframes;
-
- adapter->benet_stats.rx_fifo_errors =
- adapter->eth_statsp->params.response.p0rxfifooverflowdropped +
- adapter->eth_statsp->params.response.p1rxfifooverflowdropped;
- adapter->benet_stats.rx_frame_errors =
- adapter->eth_statsp->params.response.p0alignmentsymerrs +
- adapter->eth_statsp->params.response.p1alignmentsymerrs;
- adapter->benet_stats.rx_length_errors =
- adapter->eth_statsp->params.response.p0inrangelenerrors +
- adapter->eth_statsp->params.response.p1inrangelenerrors;
- adapter->benet_stats.rx_length_errors +=
- adapter->eth_statsp->params.response.p0outrangeerrors +
- adapter->eth_statsp->params.response.p1outrangeerrors;
- adapter->benet_stats.rx_length_errors +=
- adapter->eth_statsp->params.response.p0frametoolongerrors +
- adapter->eth_statsp->params.response.p1frametoolongerrors;
-
- pci_unmap_single(adapter->pdev, (ulong) adapter->eth_statsp,
- sizeof(struct FWCMD_ETH_GET_STATISTICS),
- PCI_DMA_FROMDEVICE);
- return &(adapter->benet_stats);
-
-}
-
-static void be_start_tx(struct be_net_object *pnob, u32 nposted)
-{
-#define CSR_ETH_MAX_SQPOSTS 255
- struct SQ_DB_AMAP sqdb;
-
- sqdb.dw[0] = 0;
-
- AMAP_SET_BITS_PTR(SQ_DB, cid, &sqdb, pnob->tx_q_id);
- while (nposted) {
- if (nposted > CSR_ETH_MAX_SQPOSTS) {
- AMAP_SET_BITS_PTR(SQ_DB, numPosted, &sqdb,
- CSR_ETH_MAX_SQPOSTS);
- nposted -= CSR_ETH_MAX_SQPOSTS;
- } else {
- AMAP_SET_BITS_PTR(SQ_DB, numPosted, &sqdb, nposted);
- nposted = 0;
- }
- PD_WRITE(&pnob->fn_obj, etx_sq_db, sqdb.dw[0]);
- }
-
- return;
-}
-
-static void update_tx_rate(struct be_adapter *adapter)
-{
- /* update the rate once in two seconds */
- if ((jiffies - adapter->eth_tx_jiffies) > 2 * (HZ)) {
- u32 r;
- r = adapter->eth_tx_bytes /
- ((jiffies - adapter->eth_tx_jiffies) / (HZ));
- r = (r / 1000000); /* M bytes/s */
- adapter->be_stat.bes_eth_tx_rate = (r * 8); /* M bits/s */
- adapter->eth_tx_jiffies = jiffies;
- adapter->eth_tx_bytes = 0;
- }
-}
-
-static int wrb_cnt_in_skb(struct sk_buff *skb)
-{
- int cnt = 0;
- while (skb) {
- if (skb->len > skb->data_len)
- cnt++;
- cnt += skb_shinfo(skb)->nr_frags;
- skb = skb_shinfo(skb)->frag_list;
- }
- BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
- return cnt;
-}
-
-static void wrb_fill(struct ETH_WRB_AMAP *wrb, u64 addr, int len)
-{
- AMAP_SET_BITS_PTR(ETH_WRB, frag_pa_hi, wrb, addr >> 32);
- AMAP_SET_BITS_PTR(ETH_WRB, frag_pa_lo, wrb, addr & 0xFFFFFFFF);
- AMAP_SET_BITS_PTR(ETH_WRB, frag_len, wrb, len);
-}
-
-static void wrb_fill_extra(struct ETH_WRB_AMAP *wrb, struct sk_buff *skb,
- struct be_net_object *pnob)
-{
- wrb->dw[2] = 0;
- wrb->dw[3] = 0;
- AMAP_SET_BITS_PTR(ETH_WRB, crc, wrb, 1);
- if (skb_shinfo(skb)->gso_segs > 1 && skb_shinfo(skb)->gso_size) {
- AMAP_SET_BITS_PTR(ETH_WRB, lso, wrb, 1);
- AMAP_SET_BITS_PTR(ETH_WRB, lso_mss, wrb,
- skb_shinfo(skb)->gso_size);
- } else if (skb->ip_summed == CHECKSUM_PARTIAL) {
- u8 proto = ((struct iphdr *)ip_hdr(skb))->protocol;
- if (proto == IPPROTO_TCP)
- AMAP_SET_BITS_PTR(ETH_WRB, tcpcs, wrb, 1);
- else if (proto == IPPROTO_UDP)
- AMAP_SET_BITS_PTR(ETH_WRB, udpcs, wrb, 1);
- }
- if (pnob->vlan_grp && vlan_tx_tag_present(skb)) {
- AMAP_SET_BITS_PTR(ETH_WRB, vlan, wrb, 1);
- AMAP_SET_BITS_PTR(ETH_WRB, vlan_tag, wrb, vlan_tx_tag_get(skb));
- }
-}
-
-static inline void wrb_copy_extra(struct ETH_WRB_AMAP *to,
- struct ETH_WRB_AMAP *from)
-{
-
- to->dw[2] = from->dw[2];
- to->dw[3] = from->dw[3];
-}
-
-/* Returns the actual count of wrbs used including a possible dummy */
-static int copy_skb_to_txq(struct be_net_object *pnob, struct sk_buff *skb,
- u32 wrb_cnt, u32 *copied)
-{
- u64 busaddr;
- struct ETH_WRB_AMAP *wrb = NULL, *first = NULL;
- u32 i;
- bool dummy = true;
- struct pci_dev *pdev = pnob->adapter->pdev;
-
- if (wrb_cnt & 1)
- wrb_cnt++;
- else
- dummy = false;
-
- atomic_add(wrb_cnt, &pnob->tx_q_used);
-
- while (skb) {
- if (skb->len > skb->data_len) {
- int len = skb->len - skb->data_len;
- busaddr = pci_map_single(pdev, skb->data, len,
- PCI_DMA_TODEVICE);
- busaddr = cpu_to_le64(busaddr);
- wrb = &pnob->tx_q[pnob->tx_q_hd];
- if (first == NULL) {
- wrb_fill_extra(wrb, skb, pnob);
- first = wrb;
- } else {
- wrb_copy_extra(wrb, first);
- }
- wrb_fill(wrb, busaddr, len);
- be_adv_txq_hd(pnob);
- *copied += len;
- }
-
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- struct skb_frag_struct *frag =
- &skb_shinfo(skb)->frags[i];
- busaddr = pci_map_page(pdev, frag->page,
- frag->page_offset, frag->size,
- PCI_DMA_TODEVICE);
- busaddr = cpu_to_le64(busaddr);
- wrb = &pnob->tx_q[pnob->tx_q_hd];
- if (first == NULL) {
- wrb_fill_extra(wrb, skb, pnob);
- first = wrb;
- } else {
- wrb_copy_extra(wrb, first);
- }
- wrb_fill(wrb, busaddr, frag->size);
- be_adv_txq_hd(pnob);
- *copied += frag->size;
- }
- skb = skb_shinfo(skb)->frag_list;
- }
-
- if (dummy) {
- wrb = &pnob->tx_q[pnob->tx_q_hd];
- BUG_ON(first == NULL);
- wrb_copy_extra(wrb, first);
- wrb_fill(wrb, 0, 0);
- be_adv_txq_hd(pnob);
- }
- AMAP_SET_BITS_PTR(ETH_WRB, complete, wrb, 1);
- AMAP_SET_BITS_PTR(ETH_WRB, last, wrb, 1);
- return wrb_cnt;
-}
-
-/* For each skb transmitted, tx_ctxt stores the num of wrbs in the
- * start index and skb pointer in the end index
- */
-static inline void be_tx_wrb_info_remember(struct be_net_object *pnob,
- struct sk_buff *skb, int wrb_cnt,
- u32 start)
-{
- *(u32 *) (&pnob->tx_ctxt[start]) = wrb_cnt;
- index_adv(&start, wrb_cnt - 1, pnob->tx_q_len);
- pnob->tx_ctxt[start] = skb;
-}
-
-static int benet_xmit(struct sk_buff *skb, struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
- u32 wrb_cnt, copied = 0;
- u32 start = pnob->tx_q_hd;
-
- adapter->be_stat.bes_tx_reqs++;
-
- wrb_cnt = wrb_cnt_in_skb(skb);
- spin_lock_bh(&adapter->txq_lock);
- if ((pnob->tx_q_len - 2 - atomic_read(&pnob->tx_q_used)) <= wrb_cnt) {
- netif_stop_queue(pnob->netdev);
- spin_unlock_bh(&adapter->txq_lock);
- adapter->be_stat.bes_tx_fails++;
- return NETDEV_TX_BUSY;
- }
- spin_unlock_bh(&adapter->txq_lock);
-
- wrb_cnt = copy_skb_to_txq(pnob, skb, wrb_cnt, &copied);
- be_tx_wrb_info_remember(pnob, skb, wrb_cnt, start);
-
- be_start_tx(pnob, wrb_cnt);
-
- adapter->eth_tx_bytes += copied;
- adapter->be_stat.bes_tx_wrbs += wrb_cnt;
- update_tx_rate(adapter);
- netdev->trans_start = jiffies;
-
- return NETDEV_TX_OK;
-}
-
-/*
- * This is the driver entry point to change the mtu of the device
- * Returns 0 for success and errno for failure.
- */
-static int benet_change_mtu(struct net_device *netdev, int new_mtu)
-{
- /*
- * BE supports jumbo frame size upto 9000 bytes including the link layer
- * header. Considering the different variants of frame formats possible
- * like VLAN, SNAP/LLC, the maximum possible value for MTU is 8974 bytes
- */
-
- if (new_mtu < (ETH_ZLEN + ETH_FCS_LEN) || (new_mtu > BE_MAX_MTU)) {
- dev_info(&netdev->dev, "Invalid MTU requested. "
- "Must be between %d and %d bytes\n",
- (ETH_ZLEN + ETH_FCS_LEN), BE_MAX_MTU);
- return -EINVAL;
- }
- dev_info(&netdev->dev, "MTU changed from %d to %d\n",
- netdev->mtu, new_mtu);
- netdev->mtu = new_mtu;
- return 0;
-}
-
-/*
- * This is the driver entry point to register a vlan with the device
- */
-static void benet_vlan_register(struct net_device *netdev,
- struct vlan_group *grp)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
-
- be_disable_eq_intr(pnob);
- pnob->vlan_grp = grp;
- pnob->num_vlans = 0;
- be_enable_eq_intr(pnob);
-}
-
-/*
- * This is the driver entry point to add a vlan vlan_id
- * with the device netdev
- */
-static void benet_vlan_add_vid(struct net_device *netdev, u16 vlan_id)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
-
- if (pnob->num_vlans == (BE_NUM_VLAN_SUPPORTED - 1)) {
- /* no way to return an error */
- dev_info(&netdev->dev,
- "BladeEngine: Cannot configure more than %d Vlans\n",
- BE_NUM_VLAN_SUPPORTED);
- return;
- }
- /* The new vlan tag will be in the slot indicated by num_vlans. */
- pnob->vlan_tag[pnob->num_vlans++] = vlan_id;
- be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
- pnob->vlan_tag, NULL, NULL, NULL);
-}
-
-/*
- * This is the driver entry point to remove a vlan vlan_id
- * with the device netdev
- */
-static void benet_vlan_rem_vid(struct net_device *netdev, u16 vlan_id)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
-
- u32 i, value;
-
- /*
- * In Blade Engine, we support 32 vlan tag filters across both ports.
- * To program a vlan tag, the RXF_RTPR_CSR register is used.
- * Each 32-bit value of RXF_RTDR_CSR can address 2 vlan tag entries.
- * The Vlan table is of depth 16. thus we support 32 tags.
- */
-
- value = vlan_id | VLAN_VALID_BIT;
- for (i = 0; i < BE_NUM_VLAN_SUPPORTED; i++) {
- if (pnob->vlan_tag[i] == vlan_id)
- break;
- }
-
- if (i == BE_NUM_VLAN_SUPPORTED)
- return;
- /* Now compact the vlan tag array by removing hole created. */
- while ((i + 1) < BE_NUM_VLAN_SUPPORTED) {
- pnob->vlan_tag[i] = pnob->vlan_tag[i + 1];
- i++;
- }
- if ((i + 1) == BE_NUM_VLAN_SUPPORTED)
- pnob->vlan_tag[i] = (u16) 0x0;
- pnob->num_vlans--;
- be_rxf_vlan_config(&pnob->fn_obj, false, pnob->num_vlans,
- pnob->vlan_tag, NULL, NULL, NULL);
-}
-
-/*
- * This function is called to program multicast
- * address in the multicast filter of the ASIC.
- */
-static void be_set_multicast_filter(struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct dev_mc_list *mc_ptr;
- u8 mac_addr[32][ETH_ALEN];
- int i;
-
- if (netdev->flags & IFF_ALLMULTI) {
- /* set BE in Multicast promiscuous */
- be_rxf_multicast_config(&pnob->fn_obj, true, 0, NULL, NULL,
- NULL, NULL);
- return;
- }
-
- for (mc_ptr = netdev->mc_list, i = 0; mc_ptr;
- mc_ptr = mc_ptr->next, i++) {
- memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
- }
-
- /* reset the promiscuous mode also. */
- be_rxf_multicast_config(&pnob->fn_obj, false, i,
- &mac_addr[0][0], NULL, NULL, NULL);
-}
-
-/*
- * This is the driver entry point to set multicast list
- * with the device netdev. This function will be used to
- * set promiscuous mode or multicast promiscuous mode
- * or multicast mode....
- */
-static void benet_set_multicast_list(struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
-
- if (netdev->flags & IFF_PROMISC) {
- be_rxf_promiscuous(&pnob->fn_obj, 1, 1, NULL, NULL, NULL);
- } else {
- be_rxf_promiscuous(&pnob->fn_obj, 0, 0, NULL, NULL, NULL);
- be_set_multicast_filter(netdev);
- }
-}
-
-int benet_init(struct net_device *netdev)
-{
- struct be_net_object *pnob = netdev_priv(netdev);
- struct be_adapter *adapter = pnob->adapter;
-
- ether_setup(netdev);
-
- netdev->open = &benet_open;
- netdev->stop = &benet_close;
- netdev->hard_start_xmit = &benet_xmit;
-
- netdev->get_stats = &benet_get_stats;
-
- netdev->set_multicast_list = &benet_set_multicast_list;
-
- netdev->change_mtu = &benet_change_mtu;
- netdev->set_mac_address = &benet_set_mac_addr;
-
- netdev->vlan_rx_register = benet_vlan_register;
- netdev->vlan_rx_add_vid = benet_vlan_add_vid;
- netdev->vlan_rx_kill_vid = benet_vlan_rem_vid;
-
- netdev->features =
- NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM;
-
- netdev->flags |= IFF_MULTICAST;
-
- /* If device is DAC Capable, set the HIGHDMA flag for netdevice. */
- if (adapter->dma_64bit_cap)
- netdev->features |= NETIF_F_HIGHDMA;
-
- SET_ETHTOOL_OPS(netdev, &be_ethtool_ops);
- return 0;
-}
diff --git a/drivers/staging/benet/benet.h b/drivers/staging/benet/benet.h
deleted file mode 100644
index 09a1f08..0000000
--- a/drivers/staging/benet/benet.h
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#ifndef _BENET_H_
-#define _BENET_H_
-
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/inet_lro.h>
-#include "hwlib.h"
-
-#define _SA_MODULE_NAME "net-driver"
-
-#define VLAN_VALID_BIT 0x8000
-#define BE_NUM_VLAN_SUPPORTED 32
-#define BE_PORT_LINK_DOWN 0000
-#define BE_PORT_LINK_UP 0001
-#define BE_MAX_TX_FRAG_COUNT (30)
-
-/* Flag bits for send operation */
-#define IPCS (1 << 0) /* Enable IP checksum offload */
-#define UDPCS (1 << 1) /* Enable UDP checksum offload */
-#define TCPCS (1 << 2) /* Enable TCP checksum offload */
-#define LSO (1 << 3) /* Enable Large Segment offload */
-#define ETHVLAN (1 << 4) /* Enable VLAN insert */
-#define ETHEVENT (1 << 5) /* Generate event on completion */
-#define ETHCOMPLETE (1 << 6) /* Generate completion when done */
-#define IPSEC (1 << 7) /* Enable IPSEC */
-#define FORWARD (1 << 8) /* Send the packet in forwarding path */
-#define FIN (1 << 9) /* Issue FIN segment */
-
-#define BE_MAX_MTU 8974
-
-#define BE_MAX_LRO_DESCRIPTORS 8
-#define BE_LRO_MAX_PKTS 64
-#define BE_MAX_FRAGS_PER_FRAME 6
-
-extern const char be_drvr_ver[];
-extern char be_fw_ver[];
-extern char be_driver_name[];
-
-extern struct ethtool_ops be_ethtool_ops;
-
-#define BE_DEV_STATE_NONE 0
-#define BE_DEV_STATE_INIT 1
-#define BE_DEV_STATE_OPEN 2
-#define BE_DEV_STATE_SUSPEND 3
-
-/* This structure is used to describe physical fragments to use
- * for DMAing data from NIC.
- */
-struct be_recv_buffer {
- struct list_head rxb_list; /* for maintaining a linked list */
- void *rxb_va; /* buffer virtual address */
- u32 rxb_pa_lo; /* low part of physical address */
- u32 rxb_pa_hi; /* high part of physical address */
- u32 rxb_len; /* length of recv buffer */
- void *rxb_ctxt; /* context for OSM driver to use */
-};
-
-/*
- * fragment list to describe scattered data.
- */
-struct be_tx_frag_list {
- u32 txb_len; /* Size of this fragment */
- u32 txb_pa_lo; /* Lower 32 bits of 64 bit physical addr */
- u32 txb_pa_hi; /* Higher 32 bits of 64 bit physical addr */
-};
-
-struct be_rx_page_info {
- struct page *page;
- dma_addr_t bus;
- u16 page_offset;
-};
-
-/*
- * This structure is the main tracking structure for a NIC interface.
- */
-struct be_net_object {
- /* MCC Ring - used to send fwcmds to embedded ARM processor */
- struct MCC_WRB_AMAP *mcc_q; /* VA of the start of the ring */
- u32 mcc_q_len; /* # of WRB entries in this ring */
- u32 mcc_q_size;
- u32 mcc_q_hd; /* MCC ring head */
- u8 mcc_q_created; /* flag to help cleanup */
- struct be_mcc_object mcc_q_obj; /* BECLIB's MCC ring Object */
- dma_addr_t mcc_q_bus; /* DMA'ble bus address */
-
- /* MCC Completion Ring - FW responses to fwcmds sent from MCC ring */
- struct MCC_CQ_ENTRY_AMAP *mcc_cq; /* VA of the start of the ring */
- u32 mcc_cq_len; /* # of compl. entries in this ring */
- u32 mcc_cq_size;
- u32 mcc_cq_tl; /* compl. ring tail */
- u8 mcc_cq_created; /* flag to help cleanup */
- struct be_cq_object mcc_cq_obj; /* BECLIB's MCC compl. ring object */
- u32 mcc_cq_id; /* MCC ring ID */
- dma_addr_t mcc_cq_bus; /* DMA'ble bus address */
-
- struct ring_desc mb_rd; /* RD for MCC_MAIL_BOX */
- void *mb_ptr; /* mailbox ptr to be freed */
- dma_addr_t mb_bus; /* DMA'ble bus address */
- u32 mb_size;
-
- /* BEClib uses an array of context objects to track outstanding
- * requests to the MCC. We need allocate the same number of
- * conext entries as the number of entries in the MCC WRB ring
- */
- u32 mcc_wrb_ctxt_size;
- void *mcc_wrb_ctxt; /* pointer to the context area */
- u32 mcc_wrb_ctxtLen; /* Number of entries in the context */
- /*
- * NIC send request ring - used for xmitting raw ether frames.
- */
- struct ETH_WRB_AMAP *tx_q; /* VA of the start of the ring */
- u32 tx_q_len; /* # if entries in the send ring */
- u32 tx_q_size;
- u32 tx_q_hd; /* Head index. Next req. goes here */
- u32 tx_q_tl; /* Tail indx. oldest outstanding req. */
- u8 tx_q_created; /* flag to help cleanup */
- struct be_ethsq_object tx_q_obj;/* BECLIB's send Q handle */
- dma_addr_t tx_q_bus; /* DMA'ble bus address */
- u32 tx_q_id; /* send queue ring ID */
- u32 tx_q_port; /* 0 no binding, 1 port A, 2 port B */
- atomic_t tx_q_used; /* # of WRBs used */
- /* ptr to an array in which we store context info for each send req. */
- void **tx_ctxt;
- /*
- * NIC Send compl. ring - completion status for all NIC frames xmitted.
- */
- struct ETH_TX_COMPL_AMAP *tx_cq;/* VA of start of the ring */
- u32 txcq_len; /* # of entries in the ring */
- u32 tx_cq_size;
- /*
- * index into compl ring where the host expects next completion entry
- */
- u32 tx_cq_tl;
- u32 tx_cq_id; /* completion queue id */
- u8 tx_cq_created; /* flag to help cleanup */
- struct be_cq_object tx_cq_obj;
- dma_addr_t tx_cq_bus; /* DMA'ble bus address */
- /*
- * Event Queue - all completion entries post events here.
- */
- struct EQ_ENTRY_AMAP *event_q; /* VA of start of event queue */
- u32 event_q_len; /* # of entries */
- u32 event_q_size;
- u32 event_q_tl; /* Tail of the event queue */
- u32 event_q_id; /* Event queue ID */
- u8 event_q_created; /* flag to help cleanup */
- struct be_eq_object event_q_obj; /* Queue handle */
- dma_addr_t event_q_bus; /* DMA'ble bus address */
- /*
- * NIC receive queue - Data buffers to be used for receiving unicast,
- * broadcast and multi-cast frames are posted here.
- */
- struct ETH_RX_D_AMAP *rx_q; /* VA of start of the queue */
- u32 rx_q_len; /* # of entries */
- u32 rx_q_size;
- u32 rx_q_hd; /* Head of the queue */
- atomic_t rx_q_posted; /* number of posted buffers */
- u32 rx_q_id; /* queue ID */
- u8 rx_q_created; /* flag to help cleanup */
- struct be_ethrq_object rx_q_obj; /* NIC RX queue handle */
- dma_addr_t rx_q_bus; /* DMA'ble bus address */
- /*
- * Pointer to an array of opaque context object for use by OSM driver
- */
- void **rx_ctxt;
- /*
- * NIC unicast RX completion queue - all unicast ether frame completion
- * statuses from BE come here.
- */
- struct ETH_RX_COMPL_AMAP *rx_cq; /* VA of start of the queue */
- u32 rx_cq_len; /* # of entries */
- u32 rx_cq_size;
- u32 rx_cq_tl; /* Tail of the queue */
- u32 rx_cq_id; /* queue ID */
- u8 rx_cq_created; /* flag to help cleanup */
- struct be_cq_object rx_cq_obj; /* queue handle */
- dma_addr_t rx_cq_bus; /* DMA'ble bus address */
- struct be_function_object fn_obj; /* function object */
- bool fn_obj_created;
- u32 rx_buf_size; /* Size of the RX buffers */
-
- struct net_device *netdev;
- struct be_recv_buffer eth_rx_bufs[256]; /* to pass Rx buffer
- addresses */
- struct be_adapter *adapter; /* Pointer to OSM adapter */
- u32 devno; /* OSM, network dev no. */
- u32 use_port; /* Current active port */
- struct be_rx_page_info *rx_page_info; /* Array of Rx buf pages */
- u32 rx_pg_info_hd; /* Head of queue */
- int rxbuf_post_fail; /* RxBuff posting fail count */
- bool rx_pg_shared; /* Is an allocsted page shared as two frags ? */
- struct vlan_group *vlan_grp;
- u32 num_vlans; /* Number of vlans in BE's filter */
- u16 vlan_tag[BE_NUM_VLAN_SUPPORTED]; /* vlans currently configured */
- struct napi_struct napi;
- struct net_lro_mgr lro_mgr;
- struct net_lro_desc lro_desc[BE_MAX_LRO_DESCRIPTORS];
-};
-
-#define NET_FH(np) (&(np)->fn_obj)
-
-/*
- * BE driver statistics.
- */
-struct be_drvr_stat {
- u32 bes_tx_reqs; /* number of TX requests initiated */
- u32 bes_tx_fails; /* number of TX requests that failed */
- u32 bes_fwd_reqs; /* number of send reqs through forwarding i/f */
- u32 bes_tx_wrbs; /* number of tx WRBs used */
-
- u32 bes_ints; /* number of interrupts */
- u32 bes_polls; /* number of times NAPI called poll function */
- u32 bes_events; /* total evet entries processed */
- u32 bes_tx_events; /* number of tx completion events */
- u32 bes_rx_events; /* number of ucast rx completion events */
- u32 bes_tx_compl; /* number of tx completion entries processed */
- u32 bes_rx_compl; /* number of rx completion entries
- processed */
- u32 bes_ethrx_post_fail; /* number of ethrx buffer alloc
- failures */
- /*
- * number of non ether type II frames dropped where
- * frame len > length field of Mac Hdr
- */
- u32 bes_802_3_dropped_frames;
- /*
- * number of non ether type II frames malformed where
- * in frame len < length field of Mac Hdr
- */
- u32 bes_802_3_malformed_frames;
- u32 bes_ips; /* interrupts / sec */
- u32 bes_prev_ints; /* bes_ints at last IPS calculation */
- u16 bes_eth_tx_rate; /* ETH TX rate - Mb/sec */
- u16 bes_eth_rx_rate; /* ETH RX rate - Mb/sec */
- u32 bes_rx_coal; /* Num pkts coalasced */
- u32 bes_rx_flush; /* Num times coalasced */
- u32 bes_link_change_physical; /*Num of times physical link changed */
- u32 bes_link_change_virtual; /*Num of times virtual link changed */
- u32 bes_rx_misc_pkts; /* Misc pkts received */
-};
-
-/* Maximum interrupt delay (in microseconds) allowed */
-#define MAX_EQD 120
-
-/*
- * timer to prevent system shutdown hang for ever if h/w stops responding
- */
-struct be_timer_ctxt {
- atomic_t get_stat_flag;
- struct timer_list get_stats_timer;
- unsigned long get_stat_sem_addr;
-} ;
-
-/* This structure is the main BladeEngine driver context. */
-struct be_adapter {
- struct net_device *netdevp;
- struct be_drvr_stat be_stat;
- struct net_device_stats benet_stats;
-
- /* PCI BAR mapped addresses */
- u8 __iomem *csr_va; /* CSR */
- u8 __iomem *db_va; /* Door Bell */
- u8 __iomem *pci_va; /* PCI Config */
-
- struct tasklet_struct sts_handler;
- struct timer_list cq_timer;
- spinlock_t int_lock; /* to protect the isr field in adapter */
-
- struct FWCMD_ETH_GET_STATISTICS *eth_statsp;
- /*
- * This will enable the use of ethtool to enable or disable
- * Checksum on Rx pkts to be obeyed or disobeyed.
- * If this is true = 1, then whatever is the checksum on the
- * Received pkt as per BE, it will be given to the stack.
- * Else the stack will re calculate it.
- */
- bool rx_csum;
- /*
- * This will enable the use of ethtool to enable or disable
- * Coalese on Rx pkts to be obeyed or disobeyed.
- * If this is grater than 0 and less than 16 then coalascing
- * is enabled else it is disabled
- */
- u32 max_rx_coal;
- struct pci_dev *pdev; /* Pointer to OS's PCI dvice */
-
- spinlock_t txq_lock; /* to stop/wake queue based on tx_q_used */
-
- u32 isr; /* copy of Intr status reg. */
-
- u32 port0_link_sts; /* Port 0 link status */
- u32 port1_link_sts; /* port 1 list status */
- struct BE_LINK_STATUS *be_link_sts;
-
- /* pointer to the first netobject of this adapter */
- struct be_net_object *net_obj;
-
- /* Flags to indicate what to clean up */
- bool tasklet_started;
- bool isr_registered;
- /*
- * adaptive interrupt coalescing (AIC) related
- */
- bool enable_aic; /* 1 if AIC is enabled */
- u16 min_eqd; /* minimum EQ delay in usec */
- u16 max_eqd; /* minimum EQ delay in usec */
- u16 cur_eqd; /* current EQ delay in usec */
- /*
- * book keeping for interrupt / sec and TX/RX rate calculation
- */
- ulong ips_jiffies; /* jiffies at last IPS calc */
- u32 eth_tx_bytes;
- ulong eth_tx_jiffies;
- u32 eth_rx_bytes;
- ulong eth_rx_jiffies;
-
- struct semaphore get_eth_stat_sem;
-
- /* timer ctxt to prevent shutdown hanging due to un-responsive BE */
- struct be_timer_ctxt timer_ctxt;
-
-#define BE_MAX_MSIX_VECTORS 32
-#define BE_MAX_REQ_MSIX_VECTORS 1 /* only one EQ in Linux driver */
- struct msix_entry msix_entries[BE_MAX_MSIX_VECTORS];
- bool msix_enabled;
- bool dma_64bit_cap; /* the Device DAC capable or not */
- u8 dev_state; /* The current state of the device */
- u8 dev_pm_state; /* The State of device before going to suspend */
-};
-
-/*
- * Every second we look at the ints/sec and adjust eq_delay
- * between adapter->min_eqd and adapter->max_eqd to keep the ints/sec between
- * IPS_HI_WM and IPS_LO_WM.
- */
-#define IPS_HI_WM 18000
-#define IPS_LO_WM 8000
-
-
-static inline void index_adv(u32 *index, u32 val, u32 limit)
-{
- BUG_ON(limit & (limit-1));
- *index = (*index + val) & (limit - 1);
-}
-
-static inline void index_inc(u32 *index, u32 limit)
-{
- BUG_ON(limit & (limit-1));
- *index = (*index + 1) & (limit - 1);
-}
-
-static inline void be_adv_eq_tl(struct be_net_object *pnob)
-{
- index_inc(&pnob->event_q_tl, pnob->event_q_len);
-}
-
-static inline void be_adv_txq_hd(struct be_net_object *pnob)
-{
- index_inc(&pnob->tx_q_hd, pnob->tx_q_len);
-}
-
-static inline void be_adv_txq_tl(struct be_net_object *pnob)
-{
- index_inc(&pnob->tx_q_tl, pnob->tx_q_len);
-}
-
-static inline void be_adv_txcq_tl(struct be_net_object *pnob)
-{
- index_inc(&pnob->tx_cq_tl, pnob->txcq_len);
-}
-
-static inline void be_adv_rxq_hd(struct be_net_object *pnob)
-{
- index_inc(&pnob->rx_q_hd, pnob->rx_q_len);
-}
-
-static inline void be_adv_rxcq_tl(struct be_net_object *pnob)
-{
- index_inc(&pnob->rx_cq_tl, pnob->rx_cq_len);
-}
-
-static inline u32 tx_compl_lastwrb_idx_get(struct be_net_object *pnob)
-{
- return (pnob->tx_q_tl + *(u32 *)&pnob->tx_ctxt[pnob->tx_q_tl] - 1)
- & (pnob->tx_q_len - 1);
-}
-
-int benet_init(struct net_device *);
-int be_ethtool_ioctl(struct net_device *, struct ifreq *);
-struct net_device_stats *benet_get_stats(struct net_device *);
-void be_process_intr(unsigned long context);
-irqreturn_t be_int(int irq, void *dev);
-void be_post_eth_rx_buffs(struct be_net_object *);
-void be_get_stat_cb(void *, int, struct MCC_WRB_AMAP *);
-void be_get_stats_timer_handler(unsigned long);
-void be_wait_nic_tx_cmplx_cmpl(struct be_net_object *);
-void be_print_link_info(struct BE_LINK_STATUS *);
-void be_update_link_status(struct be_adapter *);
-void be_init_procfs(struct be_adapter *);
-void be_cleanup_procfs(struct be_adapter *);
-int be_poll(struct napi_struct *, int);
-struct ETH_RX_COMPL_AMAP *be_get_rx_cmpl(struct be_net_object *);
-void be_notify_cmpl(struct be_net_object *, int, int, int);
-void be_enable_intr(struct be_net_object *);
-void be_enable_eq_intr(struct be_net_object *);
-void be_disable_intr(struct be_net_object *);
-void be_disable_eq_intr(struct be_net_object *);
-int be_set_uc_mac_adr(struct be_net_object *, u8, u8, u8,
- u8 *, mcc_wrb_cqe_callback, void *);
-int be_get_flow_ctl(struct be_function_object *pFnObj, bool *, bool *);
-void process_one_tx_compl(struct be_net_object *pnob, u32 end_idx);
-
-#endif /* _BENET_H_ */
diff --git a/drivers/staging/benet/bestatus.h b/drivers/staging/benet/bestatus.h
deleted file mode 100644
index 59c7a4b..0000000
--- a/drivers/staging/benet/bestatus.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#ifndef _BESTATUS_H_
-#define _BESTATUS_H_
-
-#define BE_SUCCESS (0x00000000L)
-/*
- * MessageId: BE_PENDING
- * The BladeEngine Driver call succeeded, and pended operation.
- */
-#define BE_PENDING (0x20070001L)
-#define BE_STATUS_PENDING (BE_PENDING)
-/*
- * MessageId: BE_NOT_OK
- * An error occurred.
- */
-#define BE_NOT_OK (0xE0070002L)
-/*
- * MessageId: BE_STATUS_SYSTEM_RESOURCES
- * Insufficient host system resources exist to complete the API.
- */
-#define BE_STATUS_SYSTEM_RESOURCES (0xE0070003L)
-/*
- * MessageId: BE_STATUS_CHIP_RESOURCES
- * Insufficient chip resources exist to complete the API.
- */
-#define BE_STATUS_CHIP_RESOURCES (0xE0070004L)
-/*
- * MessageId: BE_STATUS_NO_RESOURCE
- * Insufficient resources to complete request.
- */
-#define BE_STATUS_NO_RESOURCE (0xE0070005L)
-/*
- * MessageId: BE_STATUS_BUSY
- * Resource is currently busy.
- */
-#define BE_STATUS_BUSY (0xE0070006L)
-/*
- * MessageId: BE_STATUS_INVALID_PARAMETER
- * Invalid Parameter in request.
- */
-#define BE_STATUS_INVALID_PARAMETER (0xE0000007L)
-/*
- * MessageId: BE_STATUS_NOT_SUPPORTED
- * Requested operation is not supported.
- */
-#define BE_STATUS_NOT_SUPPORTED (0xE000000DL)
-
-/*
- * ***************************************************************************
- * E T H E R N E T S T A T U S
- * ***************************************************************************
- */
-
-/*
- * MessageId: BE_ETH_TX_ERROR
- * The Ethernet device driver failed to transmit a packet.
- */
-#define BE_ETH_TX_ERROR (0xE0070101L)
-
-/*
- * ***************************************************************************
- * S H A R E D S T A T U S
- * ***************************************************************************
- */
-
-/*
- * MessageId: BE_STATUS_VBD_INVALID_VERSION
- * The device driver is not compatible with this version of the VBD.
- */
-#define BE_STATUS_INVALID_VERSION (0xE0070402L)
-/*
- * MessageId: BE_STATUS_DOMAIN_DENIED
- * The operation failed to complete due to insufficient access
- * rights for the requesting domain.
- */
-#define BE_STATUS_DOMAIN_DENIED (0xE0070403L)
-/*
- * MessageId: BE_STATUS_TCP_NOT_STARTED
- * The embedded TCP/IP stack has not been started.
- */
-#define BE_STATUS_TCP_NOT_STARTED (0xE0070409L)
-/*
- * MessageId: BE_STATUS_NO_MCC_WRB
- * No free MCC WRB are available for posting the request.
- */
-#define BE_STATUS_NO_MCC_WRB (0xE0070414L)
-
-#endif /* _BESTATUS_ */
diff --git a/drivers/staging/benet/cev.h b/drivers/staging/benet/cev.h
deleted file mode 100644
index 3099692..0000000
--- a/drivers/staging/benet/cev.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __cev_amap_h__
-#define __cev_amap_h__
-#include "ep.h"
-
-/*
- * Host Interrupt Status Register 0. The first of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ0 through EQ31.
- */
-struct BE_CEV_ISR0_CSR_AMAP {
- u8 interrupt0; /* DWORD 0 */
- u8 interrupt1; /* DWORD 0 */
- u8 interrupt2; /* DWORD 0 */
- u8 interrupt3; /* DWORD 0 */
- u8 interrupt4; /* DWORD 0 */
- u8 interrupt5; /* DWORD 0 */
- u8 interrupt6; /* DWORD 0 */
- u8 interrupt7; /* DWORD 0 */
- u8 interrupt8; /* DWORD 0 */
- u8 interrupt9; /* DWORD 0 */
- u8 interrupt10; /* DWORD 0 */
- u8 interrupt11; /* DWORD 0 */
- u8 interrupt12; /* DWORD 0 */
- u8 interrupt13; /* DWORD 0 */
- u8 interrupt14; /* DWORD 0 */
- u8 interrupt15; /* DWORD 0 */
- u8 interrupt16; /* DWORD 0 */
- u8 interrupt17; /* DWORD 0 */
- u8 interrupt18; /* DWORD 0 */
- u8 interrupt19; /* DWORD 0 */
- u8 interrupt20; /* DWORD 0 */
- u8 interrupt21; /* DWORD 0 */
- u8 interrupt22; /* DWORD 0 */
- u8 interrupt23; /* DWORD 0 */
- u8 interrupt24; /* DWORD 0 */
- u8 interrupt25; /* DWORD 0 */
- u8 interrupt26; /* DWORD 0 */
- u8 interrupt27; /* DWORD 0 */
- u8 interrupt28; /* DWORD 0 */
- u8 interrupt29; /* DWORD 0 */
- u8 interrupt30; /* DWORD 0 */
- u8 interrupt31; /* DWORD 0 */
-} __packed;
-struct CEV_ISR0_CSR_AMAP {
- u32 dw[1];
-};
-
-/*
- * Host Interrupt Status Register 1. The second of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ32 through EQ63.
- */
-struct BE_CEV_ISR1_CSR_AMAP {
- u8 interrupt32; /* DWORD 0 */
- u8 interrupt33; /* DWORD 0 */
- u8 interrupt34; /* DWORD 0 */
- u8 interrupt35; /* DWORD 0 */
- u8 interrupt36; /* DWORD 0 */
- u8 interrupt37; /* DWORD 0 */
- u8 interrupt38; /* DWORD 0 */
- u8 interrupt39; /* DWORD 0 */
- u8 interrupt40; /* DWORD 0 */
- u8 interrupt41; /* DWORD 0 */
- u8 interrupt42; /* DWORD 0 */
- u8 interrupt43; /* DWORD 0 */
- u8 interrupt44; /* DWORD 0 */
- u8 interrupt45; /* DWORD 0 */
- u8 interrupt46; /* DWORD 0 */
- u8 interrupt47; /* DWORD 0 */
- u8 interrupt48; /* DWORD 0 */
- u8 interrupt49; /* DWORD 0 */
- u8 interrupt50; /* DWORD 0 */
- u8 interrupt51; /* DWORD 0 */
- u8 interrupt52; /* DWORD 0 */
- u8 interrupt53; /* DWORD 0 */
- u8 interrupt54; /* DWORD 0 */
- u8 interrupt55; /* DWORD 0 */
- u8 interrupt56; /* DWORD 0 */
- u8 interrupt57; /* DWORD 0 */
- u8 interrupt58; /* DWORD 0 */
- u8 interrupt59; /* DWORD 0 */
- u8 interrupt60; /* DWORD 0 */
- u8 interrupt61; /* DWORD 0 */
- u8 interrupt62; /* DWORD 0 */
- u8 interrupt63; /* DWORD 0 */
-} __packed;
-struct CEV_ISR1_CSR_AMAP {
- u32 dw[1];
-};
-/*
- * Host Interrupt Status Register 2. The third of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ64 through EQ95.
- */
-struct BE_CEV_ISR2_CSR_AMAP {
- u8 interrupt64; /* DWORD 0 */
- u8 interrupt65; /* DWORD 0 */
- u8 interrupt66; /* DWORD 0 */
- u8 interrupt67; /* DWORD 0 */
- u8 interrupt68; /* DWORD 0 */
- u8 interrupt69; /* DWORD 0 */
- u8 interrupt70; /* DWORD 0 */
- u8 interrupt71; /* DWORD 0 */
- u8 interrupt72; /* DWORD 0 */
- u8 interrupt73; /* DWORD 0 */
- u8 interrupt74; /* DWORD 0 */
- u8 interrupt75; /* DWORD 0 */
- u8 interrupt76; /* DWORD 0 */
- u8 interrupt77; /* DWORD 0 */
- u8 interrupt78; /* DWORD 0 */
- u8 interrupt79; /* DWORD 0 */
- u8 interrupt80; /* DWORD 0 */
- u8 interrupt81; /* DWORD 0 */
- u8 interrupt82; /* DWORD 0 */
- u8 interrupt83; /* DWORD 0 */
- u8 interrupt84; /* DWORD 0 */
- u8 interrupt85; /* DWORD 0 */
- u8 interrupt86; /* DWORD 0 */
- u8 interrupt87; /* DWORD 0 */
- u8 interrupt88; /* DWORD 0 */
- u8 interrupt89; /* DWORD 0 */
- u8 interrupt90; /* DWORD 0 */
- u8 interrupt91; /* DWORD 0 */
- u8 interrupt92; /* DWORD 0 */
- u8 interrupt93; /* DWORD 0 */
- u8 interrupt94; /* DWORD 0 */
- u8 interrupt95; /* DWORD 0 */
-} __packed;
-struct CEV_ISR2_CSR_AMAP {
- u32 dw[1];
-};
-
-/*
- * Host Interrupt Status Register 3. The fourth of four application
- * interrupt status registers. This register contains the interrupts
- * for Event Queues EQ96 through EQ127.
- */
-struct BE_CEV_ISR3_CSR_AMAP {
- u8 interrupt96; /* DWORD 0 */
- u8 interrupt97; /* DWORD 0 */
- u8 interrupt98; /* DWORD 0 */
- u8 interrupt99; /* DWORD 0 */
- u8 interrupt100; /* DWORD 0 */
- u8 interrupt101; /* DWORD 0 */
- u8 interrupt102; /* DWORD 0 */
- u8 interrupt103; /* DWORD 0 */
- u8 interrupt104; /* DWORD 0 */
- u8 interrupt105; /* DWORD 0 */
- u8 interrupt106; /* DWORD 0 */
- u8 interrupt107; /* DWORD 0 */
- u8 interrupt108; /* DWORD 0 */
- u8 interrupt109; /* DWORD 0 */
- u8 interrupt110; /* DWORD 0 */
- u8 interrupt111; /* DWORD 0 */
- u8 interrupt112; /* DWORD 0 */
- u8 interrupt113; /* DWORD 0 */
- u8 interrupt114; /* DWORD 0 */
- u8 interrupt115; /* DWORD 0 */
- u8 interrupt116; /* DWORD 0 */
- u8 interrupt117; /* DWORD 0 */
- u8 interrupt118; /* DWORD 0 */
- u8 interrupt119; /* DWORD 0 */
- u8 interrupt120; /* DWORD 0 */
- u8 interrupt121; /* DWORD 0 */
- u8 interrupt122; /* DWORD 0 */
- u8 interrupt123; /* DWORD 0 */
- u8 interrupt124; /* DWORD 0 */
- u8 interrupt125; /* DWORD 0 */
- u8 interrupt126; /* DWORD 0 */
- u8 interrupt127; /* DWORD 0 */
-} __packed;
-struct CEV_ISR3_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Completions and Events block Registers. */
-struct BE_CEV_CSRMAP_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[32]; /* DWORD 1 */
- u8 rsvd2[32]; /* DWORD 2 */
- u8 rsvd3[32]; /* DWORD 3 */
- struct BE_CEV_ISR0_CSR_AMAP isr0;
- struct BE_CEV_ISR1_CSR_AMAP isr1;
- struct BE_CEV_ISR2_CSR_AMAP isr2;
- struct BE_CEV_ISR3_CSR_AMAP isr3;
- u8 rsvd4[32]; /* DWORD 8 */
- u8 rsvd5[32]; /* DWORD 9 */
- u8 rsvd6[32]; /* DWORD 10 */
- u8 rsvd7[32]; /* DWORD 11 */
- u8 rsvd8[32]; /* DWORD 12 */
- u8 rsvd9[32]; /* DWORD 13 */
- u8 rsvd10[32]; /* DWORD 14 */
- u8 rsvd11[32]; /* DWORD 15 */
- u8 rsvd12[32]; /* DWORD 16 */
- u8 rsvd13[32]; /* DWORD 17 */
- u8 rsvd14[32]; /* DWORD 18 */
- u8 rsvd15[32]; /* DWORD 19 */
- u8 rsvd16[32]; /* DWORD 20 */
- u8 rsvd17[32]; /* DWORD 21 */
- u8 rsvd18[32]; /* DWORD 22 */
- u8 rsvd19[32]; /* DWORD 23 */
- u8 rsvd20[32]; /* DWORD 24 */
- u8 rsvd21[32]; /* DWORD 25 */
- u8 rsvd22[32]; /* DWORD 26 */
- u8 rsvd23[32]; /* DWORD 27 */
- u8 rsvd24[32]; /* DWORD 28 */
- u8 rsvd25[32]; /* DWORD 29 */
- u8 rsvd26[32]; /* DWORD 30 */
- u8 rsvd27[32]; /* DWORD 31 */
- u8 rsvd28[32]; /* DWORD 32 */
- u8 rsvd29[32]; /* DWORD 33 */
- u8 rsvd30[192]; /* DWORD 34 */
- u8 rsvd31[192]; /* DWORD 40 */
- u8 rsvd32[160]; /* DWORD 46 */
- u8 rsvd33[160]; /* DWORD 51 */
- u8 rsvd34[160]; /* DWORD 56 */
- u8 rsvd35[96]; /* DWORD 61 */
- u8 rsvd36[192][32]; /* DWORD 64 */
-} __packed;
-struct CEV_CSRMAP_AMAP {
- u32 dw[256];
-};
-
-#endif /* __cev_amap_h__ */
diff --git a/drivers/staging/benet/cq.c b/drivers/staging/benet/cq.c
deleted file mode 100644
index 6504586..0000000
--- a/drivers/staging/benet/cq.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include "hwlib.h"
-#include "bestatus.h"
-
-/*
- * Completion Queue Objects
- */
-/*
- *============================================================================
- * P U B L I C R O U T I N E S
- *============================================================================
- */
-
-/*
- This routine creates a completion queue based on the client completion
- queue configuration information.
-
-
- FunctionObject - Handle to a function object
- CqBaseVa - Base VA for a the CQ ring
- NumEntries - CEV_CQ_CNT_* values
- solEventEnable - 0 = All CQEs can generate Events if CQ is eventable
- 1 = only CQEs with solicited bit set are eventable
- eventable - Eventable CQ, generates interrupts.
- nodelay - 1 = Force interrupt, relevent if CQ eventable.
- Interrupt is asserted immediately after EQE
- write is confirmed, regardless of EQ Timer
- or watermark settings.
- wme - Enable watermark based coalescing
- wmThresh - High watermark(CQ fullness at which event
- or interrupt should be asserted). These are the
- CEV_WATERMARK encoded values.
- EqObject - EQ Handle to assign to this CQ
- ppCqObject - Internal CQ Handle returned.
-
- Returns BE_SUCCESS if successfull, otherwise a useful error code is
- returned.
-
- IRQL < DISPATCH_LEVEL
-
-*/
-int be_cq_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 length, bool solicited_eventable,
- bool no_delay, u32 wm_thresh,
- struct be_eq_object *eq_object, struct be_cq_object *cq_object)
-{
- int status = BE_SUCCESS;
- u32 num_entries_encoding;
- u32 num_entries = length / sizeof(struct MCC_CQ_ENTRY_AMAP);
- struct FWCMD_COMMON_CQ_CREATE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- u32 n;
- unsigned long irql;
-
- ASSERT(rd);
- ASSERT(cq_object);
- ASSERT(length % sizeof(struct MCC_CQ_ENTRY_AMAP) == 0);
-
- switch (num_entries) {
- case 256:
- num_entries_encoding = CEV_CQ_CNT_256;
- break;
- case 512:
- num_entries_encoding = CEV_CQ_CNT_512;
- break;
- case 1024:
- num_entries_encoding = CEV_CQ_CNT_1024;
- break;
- default:
- ASSERT(0);
- return BE_STATUS_INVALID_PARAMETER;
- }
-
- /*
- * All cq entries all the same size. Use iSCSI version
- * as a test for the proper rd length.
- */
- memset(cq_object, 0, sizeof(*cq_object));
-
- atomic_set(&cq_object->ref_count, 0);
- cq_object->parent_function = pfob;
- cq_object->eq_object = eq_object;
- cq_object->num_entries = num_entries;
- /* save for MCC cq processing */
- cq_object->va = rd->va;
-
- /* map into UT. */
- length = num_entries * sizeof(struct MCC_CQ_ENTRY_AMAP);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- ASSERT(wrb);
- TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_CQ_CREATE);
-
- fwcmd->params.request.num_pages = PAGES_SPANNED(OFFSET_IN_PAGE(rd->va),
- length);
-
- AMAP_SET_BITS_PTR(CQ_CONTEXT, valid, &fwcmd->params.request.context, 1);
- n = pfob->pci_function_number;
- AMAP_SET_BITS_PTR(CQ_CONTEXT, Func, &fwcmd->params.request.context, n);
-
- n = (eq_object != NULL);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, Eventable,
- &fwcmd->params.request.context, n);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, Armed, &fwcmd->params.request.context, 1);
-
- n = eq_object ? eq_object->eq_id : 0;
- AMAP_SET_BITS_PTR(CQ_CONTEXT, EQID, &fwcmd->params.request.context, n);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, Count,
- &fwcmd->params.request.context, num_entries_encoding);
-
- n = 0; /* Protection Domain is always 0 in Linux driver */
- AMAP_SET_BITS_PTR(CQ_CONTEXT, PD, &fwcmd->params.request.context, n);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, NoDelay,
- &fwcmd->params.request.context, no_delay);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, SolEvent,
- &fwcmd->params.request.context, solicited_eventable);
-
- n = (wm_thresh != 0xFFFFFFFF);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, WME, &fwcmd->params.request.context, n);
-
- n = (n ? wm_thresh : 0);
- AMAP_SET_BITS_PTR(CQ_CONTEXT, Watermark,
- &fwcmd->params.request.context, n);
- /* Create a page list for the FWCMD. */
- be_rd_to_pa_list(rd, fwcmd->params.request.pages,
- ARRAY_SIZE(fwcmd->params.request.pages));
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "MCC to create CQ failed.");
- goto Error;
- }
- /* Remember the CQ id. */
- cq_object->cq_id = fwcmd->params.response.cq_id;
-
- /* insert this cq into eq_object reference */
- if (eq_object) {
- atomic_inc(&eq_object->ref_count);
- list_add_tail(&cq_object->cqlist_for_eq,
- &eq_object->cq_list_head);
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
-
- Deferences the given object. Once the object's reference count drops to
- zero, the object is destroyed and all resources that are held by this object
- are released. The on-chip context is also destroyed along with the queue
- ID, and any mappings made into the UT.
-
- cq_object - CQ handle returned from cq_object_create.
-
- returns the current reference count on the object
-
- IRQL: IRQL < DISPATCH_LEVEL
-*/
-int be_cq_destroy(struct be_cq_object *cq_object)
-{
- int status = 0;
-
- /* Nothing should reference this CQ at this point. */
- ASSERT(atomic_read(&cq_object->ref_count) == 0);
-
- /* Send fwcmd to destroy the CQ. */
- status = be_function_ring_destroy(cq_object->parent_function,
- cq_object->cq_id, FWCMD_RING_TYPE_CQ,
- NULL, NULL, NULL, NULL);
- ASSERT(status == 0);
-
- /* Remove reference if this is an eventable CQ. */
- if (cq_object->eq_object) {
- atomic_dec(&cq_object->eq_object->ref_count);
- list_del(&cq_object->cqlist_for_eq);
- }
- return BE_SUCCESS;
-}
-
diff --git a/drivers/staging/benet/descriptors.h b/drivers/staging/benet/descriptors.h
deleted file mode 100644
index 8da438c..0000000
--- a/drivers/staging/benet/descriptors.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __descriptors_amap_h__
-#define __descriptors_amap_h__
-
-/*
- * --- IPC_NODE_ID_ENUM ---
- * IPC processor id values
- */
-#define TPOST_NODE_ID (0) /* TPOST ID */
-#define TPRE_NODE_ID (1) /* TPRE ID */
-#define TXULP0_NODE_ID (2) /* TXULP0 ID */
-#define TXULP1_NODE_ID (3) /* TXULP1 ID */
-#define TXULP2_NODE_ID (4) /* TXULP2 ID */
-#define RXULP0_NODE_ID (5) /* RXULP0 ID */
-#define RXULP1_NODE_ID (6) /* RXULP1 ID */
-#define RXULP2_NODE_ID (7) /* RXULP2 ID */
-#define MPU_NODE_ID (15) /* MPU ID */
-
-/*
- * --- MAC_ID_ENUM ---
- * Meaning of the mac_id field in rxpp_eth_d
- */
-#define PORT0_HOST_MAC0 (0) /* PD 0, Port 0, host networking, MAC 0. */
-#define PORT0_HOST_MAC1 (1) /* PD 0, Port 0, host networking, MAC 1. */
-#define PORT0_STORAGE_MAC0 (2) /* PD 0, Port 0, host storage, MAC 0. */
-#define PORT0_STORAGE_MAC1 (3) /* PD 0, Port 0, host storage, MAC 1. */
-#define PORT1_HOST_MAC0 (4) /* PD 0, Port 1 host networking, MAC 0. */
-#define PORT1_HOST_MAC1 (5) /* PD 0, Port 1 host networking, MAC 1. */
-#define PORT1_STORAGE_MAC0 (6) /* PD 0, Port 1 host storage, MAC 0. */
-#define PORT1_STORAGE_MAC1 (7) /* PD 0, Port 1 host storage, MAC 1. */
-#define FIRST_VM_MAC (8) /* PD 1 MAC. Protection domains have IDs */
- /* from 0x8-0x26, one per PD. */
-#define LAST_VM_MAC (38) /* PD 31 MAC. */
-#define MGMT_MAC (39) /* Management port MAC. */
-#define MARBLE_MAC0 (59) /* Used for flushing function 0 receive */
- /*
- * queues before re-using a torn-down
- * receive ring. the DA =
- * 00-00-00-00-00-00, and the MSB of the
- * SA = 00
- */
-#define MARBLE_MAC1 (60) /* Used for flushing function 1 receive */
- /*
- * queues before re-using a torn-down
- * receive ring. the DA =
- * 00-00-00-00-00-00, and the MSB of the
- * SA != 00
- */
-#define NULL_MAC (61) /* Promiscuous mode, indicates no match */
-#define MCAST_MAC (62) /* Multicast match. */
-#define BCAST_MATCH (63) /* Broadcast match. */
-
-#endif /* __descriptors_amap_h__ */
diff --git a/drivers/staging/benet/doorbells.h b/drivers/staging/benet/doorbells.h
deleted file mode 100644
index 550cc4d..0000000
--- a/drivers/staging/benet/doorbells.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __doorbells_amap_h__
-#define __doorbells_amap_h__
-
-/* The TX/RDMA send queue doorbell. */
-struct BE_SQ_DB_AMAP {
- u8 cid[11]; /* DWORD 0 */
- u8 rsvd0[5]; /* DWORD 0 */
- u8 numPosted[14]; /* DWORD 0 */
- u8 rsvd1[2]; /* DWORD 0 */
-} __packed;
-struct SQ_DB_AMAP {
- u32 dw[1];
-};
-
-/* The receive queue doorbell. */
-struct BE_RQ_DB_AMAP {
- u8 rq[10]; /* DWORD 0 */
- u8 rsvd0[13]; /* DWORD 0 */
- u8 Invalidate; /* DWORD 0 */
- u8 numPosted[8]; /* DWORD 0 */
-} __packed;
-struct RQ_DB_AMAP {
- u32 dw[1];
-};
-
-/*
- * The CQ/EQ doorbell. Software MUST set reserved fields in this
- * descriptor to zero, otherwise (CEV) hardware will not execute the
- * doorbell (flagging a bad_db_qid error instead).
- */
-struct BE_CQ_DB_AMAP {
- u8 qid[10]; /* DWORD 0 */
- u8 rsvd0[4]; /* DWORD 0 */
- u8 rearm; /* DWORD 0 */
- u8 event; /* DWORD 0 */
- u8 num_popped[13]; /* DWORD 0 */
- u8 rsvd1[3]; /* DWORD 0 */
-} __packed;
-struct CQ_DB_AMAP {
- u32 dw[1];
-};
-
-struct BE_TPM_RQ_DB_AMAP {
- u8 qid[10]; /* DWORD 0 */
- u8 rsvd0[6]; /* DWORD 0 */
- u8 numPosted[11]; /* DWORD 0 */
- u8 mss_cnt[5]; /* DWORD 0 */
-} __packed;
-struct TPM_RQ_DB_AMAP {
- u32 dw[1];
-};
-
-/*
- * Post WRB Queue Doorbell Register used by the host Storage stack
- * to notify the controller of a posted Work Request Block
- */
-struct BE_WRB_POST_DB_AMAP {
- u8 wrb_cid[10]; /* DWORD 0 */
- u8 rsvd0[6]; /* DWORD 0 */
- u8 wrb_index[8]; /* DWORD 0 */
- u8 numberPosted[8]; /* DWORD 0 */
-} __packed;
-struct WRB_POST_DB_AMAP {
- u32 dw[1];
-};
-
-/*
- * Update Default PDU Queue Doorbell Register used to communicate
- * to the controller that the driver has stopped processing the queue
- * and where in the queue it stopped, this is
- * a CQ Entry Type. Used by storage driver.
- */
-struct BE_DEFAULT_PDU_DB_AMAP {
- u8 qid[10]; /* DWORD 0 */
- u8 rsvd0[4]; /* DWORD 0 */
- u8 rearm; /* DWORD 0 */
- u8 event; /* DWORD 0 */
- u8 cqproc[14]; /* DWORD 0 */
- u8 rsvd1[2]; /* DWORD 0 */
-} __packed;
-struct DEFAULT_PDU_DB_AMAP {
- u32 dw[1];
-};
-
-/* Management Command and Controller default fragment ring */
-struct BE_MCC_DB_AMAP {
- u8 rid[11]; /* DWORD 0 */
- u8 rsvd0[5]; /* DWORD 0 */
- u8 numPosted[14]; /* DWORD 0 */
- u8 rsvd1[2]; /* DWORD 0 */
-} __packed;
-struct MCC_DB_AMAP {
- u32 dw[1];
-};
-
-/*
- * Used for bootstrapping the Host interface. This register is
- * used for driver communication with the MPU when no MCC Rings exist.
- * The software must write this register twice to post any MCC
- * command. First, it writes the register with hi=1 and the upper bits of
- * the physical address for the MCC_MAILBOX structure. Software must poll
- * the ready bit until this is acknowledged. Then, sotware writes the
- * register with hi=0 with the lower bits in the address. It must
- * poll the ready bit until the MCC command is complete. Upon completion,
- * the MCC_MAILBOX will contain a valid completion queue entry.
- */
-struct BE_MPU_MAILBOX_DB_AMAP {
- u8 ready; /* DWORD 0 */
- u8 hi; /* DWORD 0 */
- u8 address[30]; /* DWORD 0 */
-} __packed;
-struct MPU_MAILBOX_DB_AMAP {
- u32 dw[1];
-};
-
-/*
- * This is the protection domain doorbell register map. Note that
- * while this map shows doorbells for all Blade Engine supported
- * protocols, not all of these may be valid in a given function or
- * protection domain. It is the responsibility of the application
- * accessing the doorbells to know which are valid. Each doorbell
- * occupies 32 bytes of space, but unless otherwise specified,
- * only the first 4 bytes should be written. There are 32 instances
- * of these doorbells for the host and 31 virtual machines respectively.
- * The host and VMs will only map the doorbell pages belonging to its
- * protection domain. It will not be able to touch the doorbells for
- * another VM. The doorbells are the only registers directly accessible
- * by a virtual machine. Similarly, there are 511 additional
- * doorbells for RDMA protection domains. PD 0 for RDMA shares
- * the same physical protection domain doorbell page as ETH/iSCSI.
- *
- */
-struct BE_PROTECTION_DOMAIN_DBMAP_AMAP {
- u8 rsvd0[512]; /* DWORD 0 */
- struct BE_SQ_DB_AMAP rdma_sq_db;
- u8 rsvd1[7][32]; /* DWORD 17 */
- struct BE_WRB_POST_DB_AMAP iscsi_wrb_post_db;
- u8 rsvd2[7][32]; /* DWORD 25 */
- struct BE_SQ_DB_AMAP etx_sq_db;
- u8 rsvd3[7][32]; /* DWORD 33 */
- struct BE_RQ_DB_AMAP rdma_rq_db;
- u8 rsvd4[7][32]; /* DWORD 41 */
- struct BE_DEFAULT_PDU_DB_AMAP iscsi_default_pdu_db;
- u8 rsvd5[7][32]; /* DWORD 49 */
- struct BE_TPM_RQ_DB_AMAP tpm_rq_db;
- u8 rsvd6[7][32]; /* DWORD 57 */
- struct BE_RQ_DB_AMAP erx_rq_db;
- u8 rsvd7[7][32]; /* DWORD 65 */
- struct BE_CQ_DB_AMAP cq_db;
- u8 rsvd8[7][32]; /* DWORD 73 */
- struct BE_MCC_DB_AMAP mpu_mcc_db;
- u8 rsvd9[7][32]; /* DWORD 81 */
- struct BE_MPU_MAILBOX_DB_AMAP mcc_bootstrap_db;
- u8 rsvd10[935][32]; /* DWORD 89 */
-} __packed;
-struct PROTECTION_DOMAIN_DBMAP_AMAP {
- u32 dw[1024];
-};
-
-#endif /* __doorbells_amap_h__ */
diff --git a/drivers/staging/benet/ep.h b/drivers/staging/benet/ep.h
deleted file mode 100644
index 72fcf64..0000000
--- a/drivers/staging/benet/ep.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __ep_amap_h__
-#define __ep_amap_h__
-
-/* General Control and Status Register. */
-struct BE_EP_CONTROL_CSR_AMAP {
- u8 m0_RxPbuf; /* DWORD 0 */
- u8 m1_RxPbuf; /* DWORD 0 */
- u8 m2_RxPbuf; /* DWORD 0 */
- u8 ff_en; /* DWORD 0 */
- u8 rsvd0[27]; /* DWORD 0 */
- u8 CPU_reset; /* DWORD 0 */
-} __packed;
-struct EP_CONTROL_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Semaphore Register. */
-struct BE_EP_SEMAPHORE_CSR_AMAP {
- u8 value[32]; /* DWORD 0 */
-} __packed;
-struct EP_SEMAPHORE_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Embedded Processor Specific Registers. */
-struct BE_EP_CSRMAP_AMAP {
- struct BE_EP_CONTROL_CSR_AMAP ep_control;
- u8 rsvd0[32]; /* DWORD 1 */
- u8 rsvd1[32]; /* DWORD 2 */
- u8 rsvd2[32]; /* DWORD 3 */
- u8 rsvd3[32]; /* DWORD 4 */
- u8 rsvd4[32]; /* DWORD 5 */
- u8 rsvd5[8][128]; /* DWORD 6 */
- u8 rsvd6[32]; /* DWORD 38 */
- u8 rsvd7[32]; /* DWORD 39 */
- u8 rsvd8[32]; /* DWORD 40 */
- u8 rsvd9[32]; /* DWORD 41 */
- u8 rsvd10[32]; /* DWORD 42 */
- struct BE_EP_SEMAPHORE_CSR_AMAP ep_semaphore;
- u8 rsvd11[32]; /* DWORD 44 */
- u8 rsvd12[19][32]; /* DWORD 45 */
-} __packed;
-struct EP_CSRMAP_AMAP {
- u32 dw[64];
-};
-
-#endif /* __ep_amap_h__ */
diff --git a/drivers/staging/benet/eq.c b/drivers/staging/benet/eq.c
deleted file mode 100644
index db92ccd..0000000
--- a/drivers/staging/benet/eq.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include "hwlib.h"
-#include "bestatus.h"
-/*
- This routine creates an event queue based on the client completion
- queue configuration information.
-
- FunctionObject - Handle to a function object
- EqBaseVa - Base VA for a the EQ ring
- SizeEncoding - The encoded size for the EQ entries. This value is
- either CEV_EQ_SIZE_4 or CEV_EQ_SIZE_16
- NumEntries - CEV_CQ_CNT_* values.
- Watermark - Enables watermark based coalescing. This parameter
- must be of the type CEV_WMARK_* if watermarks
- are enabled. If watermarks to to be disabled
- this value should be-1.
- TimerDelay - If a timer delay is enabled this value should be the
- time of the delay in 8 microsecond units. If
- delays are not used this parameter should be
- set to -1.
- ppEqObject - Internal EQ Handle returned.
-
- Returns BE_SUCCESS if successfull,, otherwise a useful error code
- is returned.
-
- IRQL < DISPATCH_LEVEL
-*/
-int
-be_eq_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 eqe_size, u32 num_entries,
- u32 watermark, /* CEV_WMARK_* or -1 */
- u32 timer_delay, /* in 8us units, or -1 */
- struct be_eq_object *eq_object)
-{
- int status = BE_SUCCESS;
- u32 num_entries_encoding, eqe_size_encoding, length;
- struct FWCMD_COMMON_EQ_CREATE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- u32 n;
- unsigned long irql;
-
- ASSERT(rd);
- ASSERT(eq_object);
-
- switch (num_entries) {
- case 256:
- num_entries_encoding = CEV_EQ_CNT_256;
- break;
- case 512:
- num_entries_encoding = CEV_EQ_CNT_512;
- break;
- case 1024:
- num_entries_encoding = CEV_EQ_CNT_1024;
- break;
- case 2048:
- num_entries_encoding = CEV_EQ_CNT_2048;
- break;
- case 4096:
- num_entries_encoding = CEV_EQ_CNT_4096;
- break;
- default:
- ASSERT(0);
- return BE_STATUS_INVALID_PARAMETER;
- }
-
- switch (eqe_size) {
- case 4:
- eqe_size_encoding = CEV_EQ_SIZE_4;
- break;
- case 16:
- eqe_size_encoding = CEV_EQ_SIZE_16;
- break;
- default:
- ASSERT(0);
- return BE_STATUS_INVALID_PARAMETER;
- }
-
- if ((eqe_size == 4 && num_entries < 1024) ||
- (eqe_size == 16 && num_entries == 4096)) {
- TRACE(DL_ERR, "Bad EQ size. eqe_size:%d num_entries:%d",
- eqe_size, num_entries);
- ASSERT(0);
- return BE_STATUS_INVALID_PARAMETER;
- }
-
- memset(eq_object, 0, sizeof(*eq_object));
-
- atomic_set(&eq_object->ref_count, 0);
- eq_object->parent_function = pfob;
- eq_object->eq_id = 0xFFFFFFFF;
-
- INIT_LIST_HEAD(&eq_object->cq_list_head);
-
- length = num_entries * eqe_size;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- ASSERT(wrb);
- TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_EQ_CREATE);
-
- fwcmd->params.request.num_pages = PAGES_SPANNED(OFFSET_IN_PAGE(rd->va),
- length);
- n = pfob->pci_function_number;
- AMAP_SET_BITS_PTR(EQ_CONTEXT, Func, &fwcmd->params.request.context, n);
-
- AMAP_SET_BITS_PTR(EQ_CONTEXT, valid, &fwcmd->params.request.context, 1);
-
- AMAP_SET_BITS_PTR(EQ_CONTEXT, Size,
- &fwcmd->params.request.context, eqe_size_encoding);
-
- n = 0; /* Protection Domain is always 0 in Linux driver */
- AMAP_SET_BITS_PTR(EQ_CONTEXT, PD, &fwcmd->params.request.context, n);
-
- /* Let the caller ARM the EQ with the doorbell. */
- AMAP_SET_BITS_PTR(EQ_CONTEXT, Armed, &fwcmd->params.request.context, 0);
-
- AMAP_SET_BITS_PTR(EQ_CONTEXT, Count, &fwcmd->params.request.context,
- num_entries_encoding);
-
- n = pfob->pci_function_number * 32;
- AMAP_SET_BITS_PTR(EQ_CONTEXT, EventVect,
- &fwcmd->params.request.context, n);
- if (watermark != -1) {
- AMAP_SET_BITS_PTR(EQ_CONTEXT, WME,
- &fwcmd->params.request.context, 1);
- AMAP_SET_BITS_PTR(EQ_CONTEXT, Watermark,
- &fwcmd->params.request.context, watermark);
- ASSERT(watermark <= CEV_WMARK_240);
- } else
- AMAP_SET_BITS_PTR(EQ_CONTEXT, WME,
- &fwcmd->params.request.context, 0);
- if (timer_delay != -1) {
- AMAP_SET_BITS_PTR(EQ_CONTEXT, TMR,
- &fwcmd->params.request.context, 1);
-
- ASSERT(timer_delay <= 250); /* max value according to EAS */
- timer_delay = min(timer_delay, (u32)250);
-
- AMAP_SET_BITS_PTR(EQ_CONTEXT, Delay,
- &fwcmd->params.request.context, timer_delay);
- } else {
- AMAP_SET_BITS_PTR(EQ_CONTEXT, TMR,
- &fwcmd->params.request.context, 0);
- }
- /* Create a page list for the FWCMD. */
- be_rd_to_pa_list(rd, fwcmd->params.request.pages,
- ARRAY_SIZE(fwcmd->params.request.pages));
-
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "MCC to create EQ failed.");
- goto Error;
- }
- /* Get the EQ id. The MPU allocates the IDs. */
- eq_object->eq_id = fwcmd->params.response.eq_id;
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- Deferences the given object. Once the object's reference count drops to
- zero, the object is destroyed and all resources that are held by this
- object are released. The on-chip context is also destroyed along with
- the queue ID, and any mappings made into the UT.
-
- eq_object - EQ handle returned from eq_object_create.
-
- Returns BE_SUCCESS if successfull, otherwise a useful error code
- is returned.
-
- IRQL: IRQL < DISPATCH_LEVEL
-*/
-int be_eq_destroy(struct be_eq_object *eq_object)
-{
- int status = 0;
-
- ASSERT(atomic_read(&eq_object->ref_count) == 0);
- /* no CQs should reference this EQ now */
- ASSERT(list_empty(&eq_object->cq_list_head));
-
- /* Send fwcmd to destroy the EQ. */
- status = be_function_ring_destroy(eq_object->parent_function,
- eq_object->eq_id, FWCMD_RING_TYPE_EQ,
- NULL, NULL, NULL, NULL);
- ASSERT(status == 0);
-
- return BE_SUCCESS;
-}
-/*
- *---------------------------------------------------------------------------
- * Function: be_eq_modify_delay
- * Changes the EQ delay for a group of EQs.
- * num_eq - The number of EQs in the eq_array to adjust.
- * This also is the number of delay values in
- * the eq_delay_array.
- * eq_array - Array of struct be_eq_object pointers to adjust.
- * eq_delay_array - Array of "num_eq" timer delays in units
- * of microseconds. The be_eq_query_delay_range
- * fwcmd returns the resolution and range of
- * legal EQ delays.
- * cb -
- * cb_context -
- * q_ctxt - Optional. Pointer to a previously allocated
- * struct. If the MCC WRB ring is full, this
- * structure is used to queue the operation. It
- * will be posted to the MCC ring when space
- * becomes available. All queued commands will
- * be posted to the ring in the order they are
- * received. It is always valid to pass a pointer to
- * a generic be_generic_q_cntxt. However,
- * the specific context structs
- * are generally smaller than the generic struct.
- * return pend_status - BE_SUCCESS (0) on success.
- * BE_PENDING (postive value) if the FWCMD
- * completion is pending. Negative error code on failure.
- *-------------------------------------------------------------------------
- */
-int
-be_eq_modify_delay(struct be_function_object *pfob,
- u32 num_eq, struct be_eq_object **eq_array,
- u32 *eq_delay_array, mcc_wrb_cqe_callback cb,
- void *cb_context, struct be_eq_modify_delay_q_ctxt *q_ctxt)
-{
- struct FWCMD_COMMON_MODIFY_EQ_DELAY *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- struct be_generic_q_ctxt *gen_ctxt = NULL;
- u32 i;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- gen_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- gen_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_MODIFY_EQ_DELAY);
-
- ASSERT(num_eq > 0);
- ASSERT(num_eq <= ARRAY_SIZE(fwcmd->params.request.delay));
- fwcmd->params.request.num_eq = num_eq;
- for (i = 0; i < num_eq; i++) {
- fwcmd->params.request.delay[i].eq_id = eq_array[i]->eq_id;
- fwcmd->params.request.delay[i].delay_in_microseconds =
- eq_delay_array[i];
- }
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, gen_ctxt,
- cb, cb_context, NULL, NULL, fwcmd, NULL);
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
diff --git a/drivers/staging/benet/eth.c b/drivers/staging/benet/eth.c
deleted file mode 100644
index f641b62..0000000
--- a/drivers/staging/benet/eth.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/if_ether.h>
-#include "hwlib.h"
-#include "bestatus.h"
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_sq_create_ex
- * Creates an ethernet send ring - extended version with
- * additional parameters.
- * pfob -
- * rd - ring address
- * length_in_bytes -
- * type - The type of ring to create.
- * ulp - The requested ULP number for the ring.
- * This should be zero based, i.e. 0,1,2. This must
- * be valid NIC ULP based on the firmware config.
- * All doorbells for this ring must be sent to
- * this ULP. The first network ring allocated for
- * each ULP are higher performance than subsequent rings.
- * cq_object - cq object for completions
- * ex_parameters - Additional parameters (that may increase in
- * future revisions). These parameters are only used
- * for certain ring types -- see
- * struct be_eth_sq_parameters for details.
- * eth_sq -
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_sq_create_ex(struct be_function_object *pfob, struct ring_desc *rd,
- u32 length, u32 type, u32 ulp, struct be_cq_object *cq_object,
- struct be_eth_sq_parameters *ex_parameters,
- struct be_ethsq_object *eth_sq)
-{
- struct FWCMD_COMMON_ETH_TX_CREATE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- u32 n;
- unsigned long irql;
-
- ASSERT(rd);
- ASSERT(eth_sq);
- ASSERT(ex_parameters);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- memset(eth_sq, 0, sizeof(*eth_sq));
-
- eth_sq->parent_function = pfob;
- eth_sq->bid = 0xFFFFFFFF;
- eth_sq->cq_object = cq_object;
-
- /* Translate hwlib interface to arm interface. */
- switch (type) {
- case BE_ETH_TX_RING_TYPE_FORWARDING:
- type = ETH_TX_RING_TYPE_FORWARDING;
- break;
- case BE_ETH_TX_RING_TYPE_STANDARD:
- type = ETH_TX_RING_TYPE_STANDARD;
- break;
- case BE_ETH_TX_RING_TYPE_BOUND:
- ASSERT(ex_parameters->port < 2);
- type = ETH_TX_RING_TYPE_BOUND;
- break;
- default:
- TRACE(DL_ERR, "Invalid eth tx ring type:%d", type);
- return BE_NOT_OK;
- break;
- }
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- ASSERT(wrb);
- TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- /* NIC must be supported by the current config. */
- ASSERT(pfob->fw_config.nic_ulp_mask);
-
- /*
- * The ulp parameter must select a valid NIC ULP
- * for the current config.
- */
- ASSERT((1 << ulp) & pfob->fw_config.nic_ulp_mask);
-
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_ETH_TX_CREATE);
- fwcmd->header.request.port_number = ex_parameters->port;
-
- AMAP_SET_BITS_PTR(ETX_CONTEXT, pd_id,
- &fwcmd->params.request.context, 0);
-
- n = be_ring_length_to_encoding(length, sizeof(struct ETH_WRB_AMAP));
- AMAP_SET_BITS_PTR(ETX_CONTEXT, tx_ring_size,
- &fwcmd->params.request.context, n);
-
- AMAP_SET_BITS_PTR(ETX_CONTEXT, cq_id_send,
- &fwcmd->params.request.context, cq_object->cq_id);
-
- n = pfob->pci_function_number;
- AMAP_SET_BITS_PTR(ETX_CONTEXT, func, &fwcmd->params.request.context, n);
-
- fwcmd->params.request.type = type;
- fwcmd->params.request.ulp_num = (1 << ulp);
- fwcmd->params.request.num_pages = DIV_ROUND_UP(length, PAGE_SIZE);
- ASSERT(PAGES_SPANNED(rd->va, rd->length) >=
- fwcmd->params.request.num_pages);
-
- /* Create a page list for the FWCMD. */
- be_rd_to_pa_list(rd, fwcmd->params.request.pages,
- ARRAY_SIZE(fwcmd->params.request.pages));
-
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "MCC to create etx queue failed.");
- goto Error;
- }
- /* save the butler ID */
- eth_sq->bid = fwcmd->params.response.cid;
-
- /* add a reference to the corresponding CQ */
- atomic_inc(&cq_object->ref_count);
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-
-/*
- This routine destroys an ethernet send queue
-
- EthSq - EthSq Handle returned from EthSqCreate
-
- This function always return BE_SUCCESS.
-
- This function frees memory allocated by EthSqCreate for the EthSq Object.
-
-*/
-int be_eth_sq_destroy(struct be_ethsq_object *eth_sq)
-{
- int status = 0;
-
- /* Send fwcmd to destroy the queue. */
- status = be_function_ring_destroy(eth_sq->parent_function, eth_sq->bid,
- FWCMD_RING_TYPE_ETH_TX, NULL, NULL, NULL, NULL);
- ASSERT(status == 0);
-
- /* Derefence any associated CQs. */
- atomic_dec(ð_sq->cq_object->ref_count);
- return status;
-}
-/*
- This routine attempts to set the transmit flow control parameters.
-
- FunctionObject - Handle to a function object
-
- txfc_enable - transmit flow control enable - true for
- enable, false for disable
-
- rxfc_enable - receive flow control enable - true for
- enable, false for disable
-
- Returns BE_SUCCESS if successfull, otherwise a useful int error
- code is returned.
-
- IRQL: < DISPATCH_LEVEL
-
- This function always fails in non-privileged machine context.
-*/
-int
-be_eth_set_flow_control(struct be_function_object *pfob,
- bool txfc_enable, bool rxfc_enable)
-{
- struct FWCMD_COMMON_SET_FLOW_CONTROL *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_FLOW_CONTROL);
-
- fwcmd->params.request.rx_flow_control = rxfc_enable;
- fwcmd->params.request.tx_flow_control = txfc_enable;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0) {
- TRACE(DL_ERR, "set flow control fwcmd failed.");
- goto error;
- }
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine attempts to get the transmit flow control parameters.
-
- pfob - Handle to a function object
-
- txfc_enable - transmit flow control enable - true for
- enable, false for disable
-
- rxfc_enable - receive flow control enable - true for enable,
- false for disable
-
- Returns BE_SUCCESS if successfull, otherwise a useful int error code
- is returned.
-
- IRQL: < DISPATCH_LEVEL
-
- This function always fails in non-privileged machine context.
-*/
-int
-be_eth_get_flow_control(struct be_function_object *pfob,
- bool *txfc_enable, bool *rxfc_enable)
-{
- struct FWCMD_COMMON_GET_FLOW_CONTROL *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_FLOW_CONTROL);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0) {
- TRACE(DL_ERR, "get flow control fwcmd failed.");
- goto error;
- }
-
- *txfc_enable = fwcmd->params.response.tx_flow_control;
- *rxfc_enable = fwcmd->params.response.rx_flow_control;
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_set_qos
- * This function sets the ethernet transmit Quality of Service (QoS)
- * characteristics of BladeEngine for the domain. All ethernet
- * transmit rings of the domain will evenly share the bandwidth.
- * The exeception to sharing is the host primary (super) ethernet
- * transmit ring as well as the host ethernet forwarding ring
- * for missed offload data.
- * pfob -
- * max_bps - the maximum bits per second in units of
- * 10 Mbps (valid 0-100)
- * max_pps - the maximum packets per second in units
- * of 1 Kpps (0 indicates no limit)
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_set_qos(struct be_function_object *pfob, u32 max_bps, u32 max_pps)
-{
- struct FWCMD_COMMON_SET_QOS *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_QOS);
-
- /* Set fields in fwcmd */
- fwcmd->params.request.max_bits_per_second_NIC = max_bps;
- fwcmd->params.request.max_packets_per_second_NIC = max_pps;
- fwcmd->params.request.valid_flags = QOS_BITS_NIC | QOS_PKTS_NIC;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0)
- TRACE(DL_ERR, "network set qos fwcmd failed.");
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_get_qos
- * This function retrieves the ethernet transmit Quality of Service (QoS)
- * characteristics for the domain.
- * max_bps - the maximum bits per second in units of
- * 10 Mbps (valid 0-100)
- * max_pps - the maximum packets per second in units of
- * 1 Kpps (0 indicates no limit)
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_get_qos(struct be_function_object *pfob, u32 *max_bps, u32 *max_pps)
-{
- struct FWCMD_COMMON_GET_QOS *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_QOS);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0) {
- TRACE(DL_ERR, "network get qos fwcmd failed.");
- goto error;
- }
-
- *max_bps = fwcmd->params.response.max_bits_per_second_NIC;
- *max_pps = fwcmd->params.response.max_packets_per_second_NIC;
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- *---------------------------------------------------------
- * Function: be_eth_set_frame_size
- * This function sets the ethernet maximum frame size. The previous
- * values are returned.
- * pfob -
- * tx_frame_size - maximum transmit frame size in bytes
- * rx_frame_size - maximum receive frame size in bytes
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *---------------------------------------------------------
- */
-int
-be_eth_set_frame_size(struct be_function_object *pfob,
- u32 *tx_frame_size, u32 *rx_frame_size)
-{
- struct FWCMD_COMMON_SET_FRAME_SIZE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_SET_FRAME_SIZE);
- fwcmd->params.request.max_tx_frame_size = *tx_frame_size;
- fwcmd->params.request.max_rx_frame_size = *rx_frame_size;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0) {
- TRACE(DL_ERR, "network set frame size fwcmd failed.");
- goto error;
- }
-
- *tx_frame_size = fwcmd->params.response.chip_max_tx_frame_size;
- *rx_frame_size = fwcmd->params.response.chip_max_rx_frame_size;
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-
-/*
- This routine creates a Ethernet receive ring.
-
- pfob - handle to a function object
- rq_base_va - base VA for the default receive ring. this must be
- exactly 8K in length and continguous physical memory.
- cq_object - handle to a previously created CQ to be associated
- with the RQ.
- pp_eth_rq - pointer to an opqaue handle where an eth
- receive object is returned.
- Returns BE_SUCCESS if successfull, , otherwise a useful
- int error code is returned.
-
- IRQL: < DISPATCH_LEVEL
- this function allocates a struct be_ethrq_object *object.
- there must be no more than 1 of these per function object, unless the
- function object supports RSS (is networking and on the host).
- the rq_base_va must point to a buffer of exactly 8K.
- the erx::host_cqid (or host_stor_cqid) register and erx::ring_page registers
- will be updated as appropriate on return
-*/
-int
-be_eth_rq_create(struct be_function_object *pfob,
- struct ring_desc *rd, struct be_cq_object *cq_object,
- struct be_cq_object *bcmc_cq_object,
- struct be_ethrq_object *eth_rq)
-{
- int status = 0;
- struct MCC_WRB_AMAP *wrb = NULL;
- struct FWCMD_COMMON_ETH_RX_CREATE *fwcmd = NULL;
- unsigned long irql;
-
- /* MPU will set the */
- ASSERT(rd);
- ASSERT(eth_rq);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- eth_rq->parent_function = pfob;
- eth_rq->cq_object = cq_object;
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_ETH_RX_CREATE);
-
- fwcmd->params.request.num_pages = 2; /* required length */
- fwcmd->params.request.cq_id = cq_object->cq_id;
-
- if (bcmc_cq_object)
- fwcmd->params.request.bcmc_cq_id = bcmc_cq_object->cq_id;
- else
- fwcmd->params.request.bcmc_cq_id = 0xFFFF;
-
- /* Create a page list for the FWCMD. */
- be_rd_to_pa_list(rd, fwcmd->params.request.pages,
- ARRAY_SIZE(fwcmd->params.request.pages));
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "fwcmd to map eth rxq frags failed.");
- goto Error;
- }
- /* Save the ring ID for cleanup. */
- eth_rq->rid = fwcmd->params.response.id;
-
- atomic_inc(&cq_object->ref_count);
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine destroys an Ethernet receive queue
-
- eth_rq - ethernet receive queue handle returned from eth_rq_create
-
- Returns BE_SUCCESS on success and an appropriate int on failure.
-
- This function frees resourcs allocated by EthRqCreate.
- The erx::host_cqid (or host_stor_cqid) register and erx::ring_page
- registers will be updated as appropriate on return
- IRQL: < DISPATCH_LEVEL
-*/
-
-static void be_eth_rq_destroy_internal_cb(void *context, int status,
- struct MCC_WRB_AMAP *wrb)
-{
- struct be_ethrq_object *eth_rq = (struct be_ethrq_object *) context;
-
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "Destroy eth rq failed in internal callback.\n");
- } else {
- /* Dereference any CQs associated with this queue. */
- atomic_dec(ð_rq->cq_object->ref_count);
- }
-
- return;
-}
-
-int be_eth_rq_destroy(struct be_ethrq_object *eth_rq)
-{
- int status = BE_SUCCESS;
-
- /* Send fwcmd to destroy the RQ. */
- status = be_function_ring_destroy(eth_rq->parent_function,
- eth_rq->rid, FWCMD_RING_TYPE_ETH_RX, NULL, NULL,
- be_eth_rq_destroy_internal_cb, eth_rq);
-
- return status;
-}
-
-/*
- *---------------------------------------------------------------------------
- * Function: be_eth_rq_destroy_options
- * Destroys an ethernet receive ring with finer granularity options
- * than the standard be_eth_rq_destroy() API function.
- * eth_rq -
- * flush - Set to 1 to flush the ring, set to 0 to bypass the flush
- * cb - Callback function on completion
- * cb_context - Callback context
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *----------------------------------------------------------------------------
- */
-int
-be_eth_rq_destroy_options(struct be_ethrq_object *eth_rq, bool flush,
- mcc_wrb_cqe_callback cb, void *cb_context)
-{
- struct FWCMD_COMMON_RING_DESTROY *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = BE_SUCCESS;
- struct be_function_object *pfob = NULL;
- unsigned long irql;
-
- pfob = eth_rq->parent_function;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- TRACE(DL_INFO, "Destroy eth_rq ring id:%d, flush:%d", eth_rq->rid,
- flush);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- ASSERT(wrb);
- TRACE(DL_ERR, "No free MCC WRBs in destroy eth_rq ring.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_RING_DESTROY);
-
- fwcmd->params.request.id = eth_rq->rid;
- fwcmd->params.request.ring_type = FWCMD_RING_TYPE_ETH_RX;
- fwcmd->params.request.bypass_flush = ((0 == flush) ? 1 : 0);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb, cb_context,
- be_eth_rq_destroy_internal_cb, eth_rq, fwcmd, NULL);
-
- if (status != BE_SUCCESS && status != BE_PENDING) {
- TRACE(DL_ERR, "eth_rq ring destroy failed. id:%d, flush:%d",
- eth_rq->rid, flush);
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine queries the frag size for erx.
-
- pfob - handle to a function object
-
- frag_size_bytes - erx frag size in bytes that is/was set.
-
- Returns BE_SUCCESS if successfull, otherwise a useful int error
- code is returned.
-
- IRQL: < DISPATCH_LEVEL
-
-*/
-int
-be_eth_rq_get_frag_size(struct be_function_object *pfob, u32 *frag_size_bytes)
-{
- struct FWCMD_ETH_GET_RX_FRAG_SIZE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- ASSERT(frag_size_bytes);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- return BE_STATUS_NO_MCC_WRB;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_GET_RX_FRAG_SIZE);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0) {
- TRACE(DL_ERR, "get frag size fwcmd failed.");
- goto error;
- }
-
- *frag_size_bytes = 1 << fwcmd->params.response.actual_fragsize_log2;
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine attempts to set the frag size for erx. If the frag size is
- already set, the attempt fails and the current frag size is returned.
-
- pfob - Handle to a function object
-
- frag_size - Erx frag size in bytes that is/was set.
-
- current_frag_size_bytes - Pointer to location where currrent frag
- is to be rturned
-
- Returns BE_SUCCESS if successfull, otherwise a useful int error
- code is returned.
-
- IRQL: < DISPATCH_LEVEL
-
- This function always fails in non-privileged machine context.
-*/
-int
-be_eth_rq_set_frag_size(struct be_function_object *pfob,
- u32 frag_size, u32 *frag_size_bytes)
-{
- struct FWCMD_ETH_SET_RX_FRAG_SIZE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- ASSERT(frag_size_bytes);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_SET_RX_FRAG_SIZE);
-
- ASSERT(frag_size >= 128 && frag_size <= 16 * 1024);
-
- /* This is the log2 of the fragsize. This is not the exact
- * ERX encoding. */
- fwcmd->params.request.new_fragsize_log2 = __ilog2_u32(frag_size);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
-
- if (status != 0) {
- TRACE(DL_ERR, "set frag size fwcmd failed.");
- goto error;
- }
-
- *frag_size_bytes = 1 << fwcmd->params.response.actual_fragsize_log2;
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-
-/*
- This routine gets or sets a mac address for a domain
- given the port and mac.
-
- FunctionObject - Function object handle.
- port1 - Set to TRUE if this function will set/get the Port 1
- address. Only the host may set this to TRUE.
- mac1 - Set to TRUE if this function will set/get the
- MAC 1 address. Only the host may set this to TRUE.
- write - Set to TRUE if this function should write the mac address.
- mac_address - Buffer of the mac address to read or write.
-
- Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
-
- IRQL: < DISPATCH_LEVEL
-*/
-int be_rxf_mac_address_read_write(struct be_function_object *pfob,
- bool port1, /* VM must always set to false */
- bool mac1, /* VM must always set to false */
- bool mgmt, bool write,
- bool permanent, u8 *mac_address,
- mcc_wrb_cqe_callback cb, /* optional */
- void *cb_context) /* optional */
-{
- int status = BE_SUCCESS;
- union {
- struct FWCMD_COMMON_NTWK_MAC_QUERY *query;
- struct FWCMD_COMMON_NTWK_MAC_SET *set;
- } fwcmd = {NULL};
- struct MCC_WRB_AMAP *wrb = NULL;
- u32 type = 0;
- unsigned long irql;
- struct be_mcc_wrb_response_copy rc;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- ASSERT(mac_address);
-
- ASSERT(port1 == false);
- ASSERT(mac1 == false);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
-
- if (mgmt) {
- type = MAC_ADDRESS_TYPE_MANAGEMENT;
- } else {
- if (pfob->type == BE_FUNCTION_TYPE_NETWORK)
- type = MAC_ADDRESS_TYPE_NETWORK;
- else
- type = MAC_ADDRESS_TYPE_STORAGE;
- }
-
- if (write) {
- /* Prepares an embedded fwcmd, including
- * request/response sizes.
- */
- fwcmd.set = BE_PREPARE_EMBEDDED_FWCMD(pfob,
- wrb, COMMON_NTWK_MAC_SET);
-
- fwcmd.set->params.request.invalidate = 0;
- fwcmd.set->params.request.mac1 = (mac1 ? 1 : 0);
- fwcmd.set->params.request.port = (port1 ? 1 : 0);
- fwcmd.set->params.request.type = type;
-
- /* Copy the mac address to set. */
- fwcmd.set->params.request.mac.SizeOfStructure =
- sizeof(fwcmd.set->params.request.mac);
- memcpy(fwcmd.set->params.request.mac.MACAddress,
- mac_address, ETH_ALEN);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL,
- cb, cb_context, NULL, NULL, fwcmd.set, NULL);
-
- } else {
-
- /*
- * Prepares an embedded fwcmd, including
- * request/response sizes.
- */
- fwcmd.query = BE_PREPARE_EMBEDDED_FWCMD(pfob,
- wrb, COMMON_NTWK_MAC_QUERY);
-
- fwcmd.query->params.request.mac1 = (mac1 ? 1 : 0);
- fwcmd.query->params.request.port = (port1 ? 1 : 0);
- fwcmd.query->params.request.type = type;
- fwcmd.query->params.request.permanent = permanent;
-
- rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_MAC_QUERY,
- params.response.mac.MACAddress);
- rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_MAC_QUERY,
- params.response.mac.MACAddress);
- rc.va = mac_address;
- /* Post the f/w command (with a copy for the response) */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb,
- cb_context, NULL, NULL, fwcmd.query, &rc);
- }
-
- if (status < 0) {
- TRACE(DL_ERR, "mac set/query failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine writes data to context memory.
-
- pfob - Function object handle.
- mac_table - Set to the 128-bit multicast address hash table.
-
- Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
-
- IRQL: < DISPATCH_LEVEL
-*/
-
-int be_rxf_multicast_config(struct be_function_object *pfob,
- bool promiscuous, u32 num, u8 *mac_table,
- mcc_wrb_cqe_callback cb, /* optional */
- void *cb_context,
- struct be_multicast_q_ctxt *q_ctxt)
-{
- int status = BE_SUCCESS;
- struct FWCMD_COMMON_NTWK_MULTICAST_SET *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- struct be_generic_q_ctxt *generic_ctxt = NULL;
- unsigned long irql;
-
- ASSERT(num <= ARRAY_SIZE(fwcmd->params.request.mac));
-
- if (num > ARRAY_SIZE(fwcmd->params.request.mac)) {
- TRACE(DL_ERR, "Too many multicast addresses. BE supports %d.",
- (int) ARRAY_SIZE(fwcmd->params.request.mac));
- return BE_NOT_OK;
- }
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- generic_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_MULTICAST_SET);
-
- fwcmd->params.request.promiscuous = promiscuous;
- if (!promiscuous) {
- fwcmd->params.request.num_mac = num;
- if (num > 0) {
- ASSERT(mac_table);
- memcpy(fwcmd->params.request.mac,
- mac_table, ETH_ALEN * num);
- }
- }
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
- cb, cb_context, NULL, NULL, fwcmd, NULL);
- if (status < 0) {
- TRACE(DL_ERR, "multicast fwcmd failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine adds or removes a vlan tag from the rxf table.
-
- FunctionObject - Function object handle.
- VLanTag - VLan tag to add or remove.
- Add - Set to TRUE if this will add a vlan tag
-
- Returns BE_SUCCESS if successfull, otherwise a useful int is returned.
-
- IRQL: < DISPATCH_LEVEL
-*/
-int be_rxf_vlan_config(struct be_function_object *pfob,
- bool promiscuous, u32 num, u16 *vlan_tag_array,
- mcc_wrb_cqe_callback cb, /* optional */
- void *cb_context,
- struct be_vlan_q_ctxt *q_ctxt) /* optional */
-{
- int status = BE_SUCCESS;
- struct FWCMD_COMMON_NTWK_VLAN_CONFIG *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- struct be_generic_q_ctxt *generic_ctxt = NULL;
- unsigned long irql;
-
- if (num > ARRAY_SIZE(fwcmd->params.request.vlan_tag)) {
- TRACE(DL_ERR, "Too many VLAN tags.");
- return BE_NOT_OK;
- }
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- generic_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_VLAN_CONFIG);
-
- fwcmd->params.request.promiscuous = promiscuous;
- if (!promiscuous) {
- fwcmd->params.request.num_vlan = num;
-
- if (num > 0) {
- ASSERT(vlan_tag_array);
- memcpy(fwcmd->params.request.vlan_tag, vlan_tag_array,
- num * sizeof(vlan_tag_array[0]));
- }
- }
-
- /* Post the commadn */
- status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
- cb, cb_context, NULL, NULL, fwcmd, NULL);
- if (status < 0) {
- TRACE(DL_ERR, "vlan fwcmd failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-
-int be_rxf_link_status(struct be_function_object *pfob,
- struct BE_LINK_STATUS *link_status,
- mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_link_status_q_ctxt *q_ctxt)
-{
- struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- struct be_generic_q_ctxt *generic_ctxt = NULL;
- unsigned long irql;
- struct be_mcc_wrb_response_copy rc;
-
- ASSERT(link_status);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
-
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- generic_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb,
- COMMON_NTWK_LINK_STATUS_QUERY);
-
- rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY,
- params.response);
- rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY,
- params.response);
- rc.va = link_status;
- /* Post or queue the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
- cb, cb_context, NULL, NULL, fwcmd, &rc);
-
- if (status < 0) {
- TRACE(DL_ERR, "link status fwcmd failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-int
-be_rxf_query_eth_statistics(struct be_function_object *pfob,
- struct FWCMD_ETH_GET_STATISTICS *va_for_fwcmd,
- u64 pa_for_fwcmd, mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_nonembedded_q_ctxt *q_ctxt)
-{
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- struct be_generic_q_ctxt *generic_ctxt = NULL;
- unsigned long irql;
-
- ASSERT(va_for_fwcmd);
- ASSERT(pa_for_fwcmd);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
-
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- generic_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
-
- TRACE(DL_INFO, "Query eth stats. fwcmd va:%p pa:0x%08x_%08x",
- va_for_fwcmd, upper_32_bits(pa_for_fwcmd), (u32)pa_for_fwcmd);
-
- /* Prepares an embedded fwcmd, including request/response sizes. */
- va_for_fwcmd = BE_PREPARE_NONEMBEDDED_FWCMD(pfob, wrb,
- va_for_fwcmd, pa_for_fwcmd, ETH_GET_STATISTICS);
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
- cb, cb_context, NULL, NULL, va_for_fwcmd, NULL);
- if (status < 0) {
- TRACE(DL_ERR, "eth stats fwcmd failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-int
-be_rxf_promiscuous(struct be_function_object *pfob,
- bool enable_port0, bool enable_port1,
- mcc_wrb_cqe_callback cb, void *cb_context,
- struct be_promiscuous_q_ctxt *q_ctxt)
-{
- struct FWCMD_ETH_PROMISCUOUS *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- struct be_generic_q_ctxt *generic_ctxt = NULL;
- unsigned long irql;
-
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
-
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- generic_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, ETH_PROMISCUOUS);
-
- fwcmd->params.request.port0_promiscuous = enable_port0;
- fwcmd->params.request.port1_promiscuous = enable_port1;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
- cb, cb_context, NULL, NULL, fwcmd, NULL);
-
- if (status < 0) {
- TRACE(DL_ERR, "promiscuous fwcmd failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-
-/*
- *-------------------------------------------------------------------------
- * Function: be_rxf_filter_config
- * Configures BladeEngine ethernet receive filter settings.
- * pfob -
- * settings - Pointer to the requested filter settings.
- * The response from BladeEngine will be placed back
- * in this structure.
- * cb - optional
- * cb_context - optional
- * q_ctxt - Optional. Pointer to a previously allocated struct.
- * If the MCC WRB ring is full, this structure is
- * used to queue the operation. It will be posted
- * to the MCC ring when space becomes available. All
- * queued commands will be posted to the ring in
- * the order they are received. It is always valid
- * to pass a pointer to a generic
- * be_generic_q_ctxt. However, the specific
- * context structs are generally smaller than
- * the generic struct.
- * return pend_status - BE_SUCCESS (0) on success.
- * BE_PENDING (postive value) if the FWCMD
- * completion is pending. Negative error code on failure.
- *---------------------------------------------------------------------------
- */
-int
-be_rxf_filter_config(struct be_function_object *pfob,
- struct NTWK_RX_FILTER_SETTINGS *settings,
- mcc_wrb_cqe_callback cb, void *cb_context,
- struct be_rxf_filter_q_ctxt *q_ctxt)
-{
- struct FWCMD_COMMON_NTWK_RX_FILTER *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- struct be_generic_q_ctxt *generic_ctxt = NULL;
- unsigned long irql;
- struct be_mcc_wrb_response_copy rc;
-
- ASSERT(settings);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
-
- if (!wrb) {
- if (q_ctxt && cb) {
- wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- generic_ctxt = (struct be_generic_q_ctxt *) q_ctxt;
- generic_ctxt->context.bytes = sizeof(*q_ctxt);
- } else {
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_NTWK_RX_FILTER);
- memcpy(&fwcmd->params.request, settings, sizeof(*settings));
-
- rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_NTWK_RX_FILTER,
- params.response);
- rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_NTWK_RX_FILTER,
- params.response);
- rc.va = settings;
- /* Post or queue the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, generic_ctxt,
- cb, cb_context, NULL, NULL, fwcmd, &rc);
-
- if (status < 0) {
- TRACE(DL_ERR, "RXF/ERX filter config fwcmd failed.");
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
diff --git a/drivers/staging/benet/etx_context.h b/drivers/staging/benet/etx_context.h
deleted file mode 100644
index 554fbe5..0000000
--- a/drivers/staging/benet/etx_context.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __etx_context_amap_h__
-#define __etx_context_amap_h__
-
-/* ETX ring context structure. */
-struct BE_ETX_CONTEXT_AMAP {
- u8 tx_cidx[11]; /* DWORD 0 */
- u8 rsvd0[5]; /* DWORD 0 */
- u8 rsvd1[16]; /* DWORD 0 */
- u8 tx_pidx[11]; /* DWORD 1 */
- u8 rsvd2; /* DWORD 1 */
- u8 tx_ring_size[4]; /* DWORD 1 */
- u8 pd_id[5]; /* DWORD 1 */
- u8 pd_id_not_valid; /* DWORD 1 */
- u8 cq_id_send[10]; /* DWORD 1 */
- u8 rsvd3[32]; /* DWORD 2 */
- u8 rsvd4[32]; /* DWORD 3 */
- u8 cur_bytes[32]; /* DWORD 4 */
- u8 max_bytes[32]; /* DWORD 5 */
- u8 time_stamp[32]; /* DWORD 6 */
- u8 rsvd5[11]; /* DWORD 7 */
- u8 func; /* DWORD 7 */
- u8 rsvd6[20]; /* DWORD 7 */
- u8 cur_txd_count[32]; /* DWORD 8 */
- u8 max_txd_count[32]; /* DWORD 9 */
- u8 rsvd7[32]; /* DWORD 10 */
- u8 rsvd8[32]; /* DWORD 11 */
- u8 rsvd9[32]; /* DWORD 12 */
- u8 rsvd10[32]; /* DWORD 13 */
- u8 rsvd11[32]; /* DWORD 14 */
- u8 rsvd12[32]; /* DWORD 15 */
-} __packed;
-struct ETX_CONTEXT_AMAP {
- u32 dw[16];
-};
-
-#endif /* __etx_context_amap_h__ */
diff --git a/drivers/staging/benet/funcobj.c b/drivers/staging/benet/funcobj.c
deleted file mode 100644
index 0f57eb5..0000000
--- a/drivers/staging/benet/funcobj.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include "hwlib.h"
-#include "bestatus.h"
-
-
-int
-be_function_internal_query_firmware_config(struct be_function_object *pfob,
- struct BE_FIRMWARE_CONFIG *config)
-{
- struct FWCMD_COMMON_FIRMWARE_CONFIG *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
- struct be_mcc_wrb_response_copy rc;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_FIRMWARE_CONFIG);
-
- rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_FIRMWARE_CONFIG,
- params.response);
- rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_FIRMWARE_CONFIG,
- params.response);
- rc.va = config;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL,
- NULL, NULL, NULL, fwcmd, &rc);
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This allocates and initializes a function object based on the information
- provided by upper layer drivers.
-
- Returns BE_SUCCESS on success and an appropriate int on failure.
-
- A function object represents a single BladeEngine (logical) PCI function.
- That is a function object either represents
- the networking side of BladeEngine or the iSCSI side of BladeEngine.
-
- This routine will also detect and create an appropriate PD object for the
- PCI function as needed.
-*/
-int
-be_function_object_create(u8 __iomem *csr_va, u8 __iomem *db_va,
- u8 __iomem *pci_va, u32 function_type,
- struct ring_desc *mailbox, struct be_function_object *pfob)
-{
- int status;
-
- ASSERT(pfob); /* not a magic assert */
- ASSERT(function_type <= 2);
-
- TRACE(DL_INFO, "Create function object. type:%s object:0x%p",
- (function_type == BE_FUNCTION_TYPE_ISCSI ? "iSCSI" :
- (function_type == BE_FUNCTION_TYPE_NETWORK ? "Network" :
- "Arm")), pfob);
-
- memset(pfob, 0, sizeof(*pfob));
-
- pfob->type = function_type;
- pfob->csr_va = csr_va;
- pfob->db_va = db_va;
- pfob->pci_va = pci_va;
-
- spin_lock_init(&pfob->cq_lock);
- spin_lock_init(&pfob->post_lock);
- spin_lock_init(&pfob->mcc_context_lock);
-
-
- pfob->pci_function_number = 1;
-
-
- pfob->emulate = false;
- TRACE(DL_NOTE, "Non-emulation mode");
- status = be_drive_POST(pfob);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "BladeEngine POST failed.");
- goto error;
- }
-
- /* Initialize the mailbox */
- status = be_mpu_init_mailbox(pfob, mailbox);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "Failed to initialize mailbox.");
- goto error;
- }
- /*
- * Cache the firmware config for ASSERTs in hwclib and later
- * driver queries.
- */
- status = be_function_internal_query_firmware_config(pfob,
- &pfob->fw_config);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "Failed to query firmware config.");
- goto error;
- }
-
-error:
- if (status != BE_SUCCESS) {
- /* No cleanup necessary */
- TRACE(DL_ERR, "Failed to create function.");
- memset(pfob, 0, sizeof(*pfob));
- }
- return status;
-}
-
-/*
- This routine drops the reference count on a given function object. Once
- the reference count falls to zero, the function object is destroyed and all
- resources held are freed.
-
- FunctionObject - The function object to drop the reference to.
-*/
-int be_function_object_destroy(struct be_function_object *pfob)
-{
- TRACE(DL_INFO, "Destroy pfob. Object:0x%p",
- pfob);
-
-
- ASSERT(pfob->mcc == NULL);
-
- return BE_SUCCESS;
-}
-
-int be_function_cleanup(struct be_function_object *pfob)
-{
- int status = 0;
- u32 isr;
- u32 host_intr;
- struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP ctrl;
-
-
- if (pfob->type == BE_FUNCTION_TYPE_NETWORK) {
- status = be_rxf_multicast_config(pfob, false, 0,
- NULL, NULL, NULL, NULL);
- ASSERT(status == BE_SUCCESS);
- }
- /* VLAN */
- status = be_rxf_vlan_config(pfob, false, 0, NULL, NULL, NULL, NULL);
- ASSERT(status == BE_SUCCESS);
- /*
- * MCC Queue -- Switches to mailbox mode. May want to destroy
- * all but the MCC CQ before this call if polling CQ is much better
- * performance than polling mailbox register.
- */
- if (pfob->mcc)
- status = be_mcc_ring_destroy(pfob->mcc);
- /*
- * If interrupts are disabled, clear any CEV interrupt assertions that
- * fired after we stopped processing EQs.
- */
- ctrl.dw[0] = PCICFG1_READ(pfob, host_timer_int_ctrl);
- host_intr = AMAP_GET_BITS_PTR(PCICFG_HOST_TIMER_INT_CTRL_CSR,
- hostintr, ctrl.dw);
- if (!host_intr)
- if (pfob->type == BE_FUNCTION_TYPE_NETWORK)
- isr = CSR_READ(pfob, cev.isr1);
- else
- isr = CSR_READ(pfob, cev.isr0);
- else
- /* This should never happen... */
- TRACE(DL_ERR, "function_cleanup called with interrupt enabled");
- /* Function object destroy */
- status = be_function_object_destroy(pfob);
- ASSERT(status == BE_SUCCESS);
-
- return status;
-}
-
-
-void *
-be_function_prepare_embedded_fwcmd(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb, u32 payld_len, u32 request_length,
- u32 response_length, u32 opcode, u32 subsystem)
-{
- struct FWCMD_REQUEST_HEADER *header = NULL;
- u32 n;
-
- ASSERT(wrb);
-
- n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
- AMAP_SET_BITS_PTR(MCC_WRB, embedded, wrb, 1);
- AMAP_SET_BITS_PTR(MCC_WRB, payload_length, wrb, min(payld_len, n));
- header = (struct FWCMD_REQUEST_HEADER *)((u8 *)wrb + n);
-
- header->timeout = 0;
- header->domain = 0;
- header->request_length = max(request_length, response_length);
- header->opcode = opcode;
- header->subsystem = subsystem;
-
- return header;
-}
-
-void *
-be_function_prepare_nonembedded_fwcmd(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb,
- void *fwcmd_va, u64 fwcmd_pa,
- u32 payld_len,
- u32 request_length,
- u32 response_length,
- u32 opcode, u32 subsystem)
-{
- struct FWCMD_REQUEST_HEADER *header = NULL;
- u32 n;
- struct MCC_WRB_PAYLOAD_AMAP *plp;
-
- ASSERT(wrb);
- ASSERT(fwcmd_va);
-
- header = (struct FWCMD_REQUEST_HEADER *) fwcmd_va;
-
- AMAP_SET_BITS_PTR(MCC_WRB, embedded, wrb, 0);
- AMAP_SET_BITS_PTR(MCC_WRB, payload_length, wrb, payld_len);
-
- /*
- * Assume one fragment. The caller may override the SGL by
- * rewriting the 0th length and adding more entries. They
- * will also need to update the sge_count.
- */
- AMAP_SET_BITS_PTR(MCC_WRB, sge_count, wrb, 1);
-
- n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
- plp = (struct MCC_WRB_PAYLOAD_AMAP *)((u8 *)wrb + n);
- AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].length, plp, payld_len);
- AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].pa_lo, plp, (u32)fwcmd_pa);
- AMAP_SET_BITS_PTR(MCC_WRB_PAYLOAD, sgl[0].pa_hi, plp,
- upper_32_bits(fwcmd_pa));
-
- header->timeout = 0;
- header->domain = 0;
- header->request_length = max(request_length, response_length);
- header->opcode = opcode;
- header->subsystem = subsystem;
-
- return header;
-}
-
-struct MCC_WRB_AMAP *
-be_function_peek_mcc_wrb(struct be_function_object *pfob)
-{
- struct MCC_WRB_AMAP *wrb = NULL;
- u32 offset;
-
- if (pfob->mcc)
- wrb = _be_mpu_peek_ring_wrb(pfob->mcc, false);
- else {
- offset = offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8;
- wrb = (struct MCC_WRB_AMAP *) ((u8 *) pfob->mailbox.va +
- offset);
- }
-
- if (wrb)
- memset(wrb, 0, sizeof(struct MCC_WRB_AMAP));
-
- return wrb;
-}
-
-#if defined(BE_DEBUG)
-void be_function_debug_print_wrb(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb, void *optional_fwcmd_va,
- struct be_mcc_wrb_context *wrb_context)
-{
-
- struct FWCMD_REQUEST_HEADER *header = NULL;
- u8 embedded;
- u32 n;
-
- embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, wrb);
-
- if (embedded) {
- n = offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
- header = (struct FWCMD_REQUEST_HEADER *)((u8 *)wrb + n);
- } else {
- header = (struct FWCMD_REQUEST_HEADER *) optional_fwcmd_va;
- }
-
- /* Save the completed count before posting for a debug assert. */
-
- if (header) {
- wrb_context->opcode = header->opcode;
- wrb_context->subsystem = header->subsystem;
-
- } else {
- wrb_context->opcode = 0;
- wrb_context->subsystem = 0;
- }
-}
-#else
-#define be_function_debug_print_wrb(a_, b_, c_, d_)
-#endif
-
-int
-be_function_post_mcc_wrb(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb,
- struct be_generic_q_ctxt *q_ctxt,
- mcc_wrb_cqe_callback cb, void *cb_context,
- mcc_wrb_cqe_callback internal_cb,
- void *internal_cb_context, void *optional_fwcmd_va,
- struct be_mcc_wrb_response_copy *rc)
-{
- int status;
- struct be_mcc_wrb_context *wrb_context = NULL;
- u64 *p;
-
- if (q_ctxt) {
- /* Initialize context. */
- q_ctxt->context.internal_cb = internal_cb;
- q_ctxt->context.internal_cb_context = internal_cb_context;
- q_ctxt->context.cb = cb;
- q_ctxt->context.cb_context = cb_context;
- if (rc) {
- q_ctxt->context.copy.length = rc->length;
- q_ctxt->context.copy.fwcmd_offset = rc->fwcmd_offset;
- q_ctxt->context.copy.va = rc->va;
- } else
- q_ctxt->context.copy.length = 0;
-
- q_ctxt->context.optional_fwcmd_va = optional_fwcmd_va;
-
- /* Queue this request */
- status = be_function_queue_mcc_wrb(pfob, q_ctxt);
-
- goto Error;
- }
- /*
- * Allocate a WRB context struct to hold the callback pointers,
- * status, etc. This is required if commands complete out of order.
- */
- wrb_context = _be_mcc_allocate_wrb_context(pfob);
- if (!wrb_context) {
- TRACE(DL_WARN, "Failed to allocate MCC WRB context.");
- status = BE_STATUS_SYSTEM_RESOURCES;
- goto Error;
- }
- /* Initialize context. */
- memset(wrb_context, 0, sizeof(*wrb_context));
- wrb_context->internal_cb = internal_cb;
- wrb_context->internal_cb_context = internal_cb_context;
- wrb_context->cb = cb;
- wrb_context->cb_context = cb_context;
- if (rc) {
- wrb_context->copy.length = rc->length;
- wrb_context->copy.fwcmd_offset = rc->fwcmd_offset;
- wrb_context->copy.va = rc->va;
- } else
- wrb_context->copy.length = 0;
- wrb_context->wrb = wrb;
-
- /*
- * Copy the context pointer into the WRB opaque tag field.
- * Verify assumption of 64-bit tag with a compile time assert.
- */
- p = (u64 *) ((u8 *)wrb + offsetof(struct BE_MCC_WRB_AMAP, tag)/8);
- *p = (u64)(size_t)wrb_context;
-
- /* Print info about this FWCMD for debug builds. */
- be_function_debug_print_wrb(pfob, wrb, optional_fwcmd_va, wrb_context);
-
- /*
- * issue the WRB to the MPU as appropriate
- */
- if (pfob->mcc) {
- /*
- * we're in WRB mode, pass to the mcc layer
- */
- status = _be_mpu_post_wrb_ring(pfob->mcc, wrb, wrb_context);
- } else {
- /*
- * we're in mailbox mode
- */
- status = _be_mpu_post_wrb_mailbox(pfob, wrb, wrb_context);
-
- /* mailbox mode always completes synchronously */
- ASSERT(status != BE_STATUS_PENDING);
- }
-
-Error:
-
- return status;
-}
-
-int
-be_function_ring_destroy(struct be_function_object *pfob,
- u32 id, u32 ring_type, mcc_wrb_cqe_callback cb,
- void *cb_context, mcc_wrb_cqe_callback internal_cb,
- void *internal_cb_context)
-{
-
- struct FWCMD_COMMON_RING_DESTROY *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- int status = 0;
- unsigned long irql;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- TRACE(DL_INFO, "Destroy ring id:%d type:%d", id, ring_type);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- ASSERT(wrb);
- TRACE(DL_ERR, "No free MCC WRBs in destroy ring.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_RING_DESTROY);
-
- fwcmd->params.request.id = id;
- fwcmd->params.request.ring_type = ring_type;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb, cb_context,
- internal_cb, internal_cb_context, fwcmd, NULL);
- if (status != BE_SUCCESS && status != BE_PENDING) {
- TRACE(DL_ERR, "Ring destroy fwcmd failed. id:%d ring_type:%d",
- id, ring_type);
- goto Error;
- }
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-void
-be_rd_to_pa_list(struct ring_desc *rd, struct PHYS_ADDR *pa_list, u32 max_num)
-{
- u32 num_pages = PAGES_SPANNED(rd->va, rd->length);
- u32 i = 0;
- u64 pa = rd->pa;
- __le64 lepa;
-
- ASSERT(pa_list);
- ASSERT(pa);
-
- for (i = 0; i < min(num_pages, max_num); i++) {
- lepa = cpu_to_le64(pa);
- pa_list[i].lo = (u32)lepa;
- pa_list[i].hi = upper_32_bits(lepa);
- pa += PAGE_SIZE;
- }
-}
-
-
-
-/*-----------------------------------------------------------------------------
- * Function: be_function_get_fw_version
- * Retrieves the firmware version on the adpater. If the callback is
- * NULL this call executes synchronously. If the callback is not NULL,
- * the returned status will be BE_PENDING if the command was issued
- * successfully.
- * pfob -
- * fwv - Pointer to response buffer if callback is NULL.
- * cb - Callback function invoked when the FWCMD completes.
- * cb_context - Passed to the callback function.
- * return pend_status - BE_SUCCESS (0) on success.
- * BE_PENDING (postive value) if the FWCMD
- * completion is pending. Negative error code on failure.
- *---------------------------------------------------------------------------
- */
-int
-be_function_get_fw_version(struct be_function_object *pfob,
- struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD *fwv,
- mcc_wrb_cqe_callback cb, void *cb_context)
-{
- int status = BE_SUCCESS;
- struct MCC_WRB_AMAP *wrb = NULL;
- struct FWCMD_COMMON_GET_FW_VERSION *fwcmd = NULL;
- unsigned long irql;
- struct be_mcc_wrb_response_copy rc;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- TRACE(DL_ERR, "MCC wrb peek failed.");
- status = BE_STATUS_NO_MCC_WRB;
- goto Error;
- }
-
- if (!cb && !fwv) {
- TRACE(DL_ERR, "callback and response buffer NULL!");
- status = BE_NOT_OK;
- goto Error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_GET_FW_VERSION);
-
- rc.length = FIELD_SIZEOF(struct FWCMD_COMMON_GET_FW_VERSION,
- params.response);
- rc.fwcmd_offset = offsetof(struct FWCMD_COMMON_GET_FW_VERSION,
- params.response);
- rc.va = fwv;
-
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, cb,
- cb_context, NULL, NULL, fwcmd, &rc);
-
-Error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-int
-be_function_queue_mcc_wrb(struct be_function_object *pfob,
- struct be_generic_q_ctxt *q_ctxt)
-{
- int status;
-
- ASSERT(q_ctxt);
-
- /*
- * issue the WRB to the MPU as appropriate
- */
- if (pfob->mcc) {
-
- /* We're in ring mode. Queue this item. */
- pfob->mcc->backlog_length++;
- list_add_tail(&q_ctxt->context.list, &pfob->mcc->backlog);
- status = BE_PENDING;
- } else {
- status = BE_NOT_OK;
- }
- return status;
-}
-
diff --git a/drivers/staging/benet/fwcmd_common.h b/drivers/staging/benet/fwcmd_common.h
deleted file mode 100644
index 406e0d6..0000000
--- a/drivers/staging/benet/fwcmd_common.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_common_amap_h__
-#define __fwcmd_common_amap_h__
-#include "host_struct.h"
-
-/* --- PHY_LINK_DUPLEX_ENUM --- */
-#define PHY_LINK_DUPLEX_NONE (0)
-#define PHY_LINK_DUPLEX_HALF (1)
-#define PHY_LINK_DUPLEX_FULL (2)
-
-/* --- PHY_LINK_SPEED_ENUM --- */
-#define PHY_LINK_SPEED_ZERO (0) /* No link. */
-#define PHY_LINK_SPEED_10MBPS (1) /* 10 Mbps */
-#define PHY_LINK_SPEED_100MBPS (2) /* 100 Mbps */
-#define PHY_LINK_SPEED_1GBPS (3) /* 1 Gbps */
-#define PHY_LINK_SPEED_10GBPS (4) /* 10 Gbps */
-
-/* --- PHY_LINK_FAULT_ENUM --- */
-#define PHY_LINK_FAULT_NONE (0) /* No fault status
- available or detected */
-#define PHY_LINK_FAULT_LOCAL (1) /* Local fault detected */
-#define PHY_LINK_FAULT_REMOTE (2) /* Remote fault detected */
-
-/* --- BE_ULP_MASK --- */
-#define BE_ULP0_MASK (1)
-#define BE_ULP1_MASK (2)
-#define BE_ULP2_MASK (4)
-
-/* --- NTWK_ACTIVE_PORT --- */
-#define NTWK_PORT_A (0) /* Port A is currently active */
-#define NTWK_PORT_B (1) /* Port B is currently active */
-#define NTWK_NO_ACTIVE_PORT (15) /* Both ports have lost link */
-
-/* --- NTWK_LINK_TYPE --- */
-#define NTWK_LINK_TYPE_PHYSICAL (0) /* link up/down event
- applies to BladeEngine's
- Physical Ports
- */
-#define NTWK_LINK_TYPE_VIRTUAL (1) /* Virtual link up/down event
- reported by BladeExchange.
- This applies only when the
- VLD feature is enabled
- */
-
-/*
- * --- FWCMD_MAC_TYPE_ENUM ---
- * This enum defines the types of MAC addresses in the RXF MAC Address Table.
- */
-#define MAC_ADDRESS_TYPE_STORAGE (0) /* Storage MAC Address */
-#define MAC_ADDRESS_TYPE_NETWORK (1) /* Network MAC Address */
-#define MAC_ADDRESS_TYPE_PD (2) /* Protection Domain MAC Addr */
-#define MAC_ADDRESS_TYPE_MANAGEMENT (3) /* Managment MAC Address */
-
-
-/* --- FWCMD_RING_TYPE_ENUM --- */
-#define FWCMD_RING_TYPE_ETH_RX (1) /* Ring created with */
- /* FWCMD_COMMON_ETH_RX_CREATE. */
-#define FWCMD_RING_TYPE_ETH_TX (2) /* Ring created with */
- /* FWCMD_COMMON_ETH_TX_CREATE. */
-#define FWCMD_RING_TYPE_ISCSI_WRBQ (3) /* Ring created with */
- /* FWCMD_COMMON_ISCSI_WRBQ_CREATE. */
-#define FWCMD_RING_TYPE_ISCSI_DEFQ (4) /* Ring created with */
- /* FWCMD_COMMON_ISCSI_DEFQ_CREATE. */
-#define FWCMD_RING_TYPE_TPM_WRBQ (5) /* Ring created with */
- /* FWCMD_COMMON_TPM_WRBQ_CREATE. */
-#define FWCMD_RING_TYPE_TPM_DEFQ (6) /* Ring created with */
- /* FWCMD_COMMONTPM_TDEFQ_CREATE. */
-#define FWCMD_RING_TYPE_TPM_RQ (7) /* Ring created with */
- /* FWCMD_COMMON_TPM_RQ_CREATE. */
-#define FWCMD_RING_TYPE_MCC (8) /* Ring created with */
- /* FWCMD_COMMON_MCC_CREATE. */
-#define FWCMD_RING_TYPE_CQ (9) /* Ring created with */
- /* FWCMD_COMMON_CQ_CREATE. */
-#define FWCMD_RING_TYPE_EQ (10) /* Ring created with */
- /* FWCMD_COMMON_EQ_CREATE. */
-#define FWCMD_RING_TYPE_QP (11) /* Ring created with */
- /* FWCMD_RDMA_QP_CREATE. */
-
-
-/* --- ETH_TX_RING_TYPE_ENUM --- */
-#define ETH_TX_RING_TYPE_FORWARDING (1) /* Ethernet ring for
- forwarding packets */
-#define ETH_TX_RING_TYPE_STANDARD (2) /* Ethernet ring for sending
- network packets. */
-#define ETH_TX_RING_TYPE_BOUND (3) /* Ethernet ring bound to the
- port specified in the command
- header.port_number field.
- Rings of this type are
- NOT subject to the
- failover logic implemented
- in the BladeEngine.
- */
-
-/* --- FWCMD_COMMON_QOS_TYPE_ENUM --- */
-#define QOS_BITS_NIC (1) /* max_bits_per_second_NIC */
- /* field is valid. */
-#define QOS_PKTS_NIC (2) /* max_packets_per_second_NIC */
- /* field is valid. */
-#define QOS_IOPS_ISCSI (4) /* max_ios_per_second_iSCSI */
- /*field is valid. */
-#define QOS_VLAN_TAG (8) /* domain_VLAN_tag field
- is valid. */
-#define QOS_FABRIC_ID (16) /* fabric_domain_ID field
- is valid. */
-#define QOS_OEM_PARAMS (32) /* qos_params_oem field
- is valid. */
-#define QOS_TPUT_ISCSI (64) /* max_bytes_per_second_iSCSI
- field is valid. */
-
-
-/*
- * --- FAILOVER_CONFIG_ENUM ---
- * Failover configuration setting used in FWCMD_COMMON_FORCE_FAILOVER
- */
-#define FAILOVER_CONFIG_NO_CHANGE (0) /* No change to automatic */
- /* port failover setting. */
-#define FAILOVER_CONFIG_ON (1) /* Automatic port failover
- on link down is enabled. */
-#define FAILOVER_CONFIG_OFF (2) /* Automatic port failover
- on link down is disabled. */
-
-/*
- * --- FAILOVER_PORT_ENUM ---
- * Failover port setting used in FWCMD_COMMON_FORCE_FAILOVER
- */
-#define FAILOVER_PORT_A (0) /* Selects port A. */
-#define FAILOVER_PORT_B (1) /* Selects port B. */
-#define FAILOVER_PORT_NONE (15) /* No port change requested. */
-
-
-/*
- * --- MGMT_FLASHROM_OPCODE ---
- * Flash ROM operation code
- */
-#define MGMT_FLASHROM_OPCODE_FLASH (1) /* Commit downloaded data
- to Flash ROM */
-#define MGMT_FLASHROM_OPCODE_SAVE (2) /* Save downloaded data to
- ARM's DDR - do not flash */
-#define MGMT_FLASHROM_OPCODE_CLEAR (3) /* Erase specified component
- from FlashROM */
-#define MGMT_FLASHROM_OPCODE_REPORT (4) /* Read specified component
- from Flash ROM */
-#define MGMT_FLASHROM_OPCODE_IMAGE_INFO (5) /* Returns size of a
- component */
-
-/*
- * --- MGMT_FLASHROM_OPTYPE ---
- * Flash ROM operation type
- */
-#define MGMT_FLASHROM_OPTYPE_CODE_FIRMWARE (0) /* Includes ARM firmware,
- IPSec (optional) and EP
- firmware */
-#define MGMT_FLASHROM_OPTYPE_CODE_REDBOOT (1)
-#define MGMT_FLASHROM_OPTYPE_CODE_BIOS (2)
-#define MGMT_FLASHROM_OPTYPE_CODE_PXE_BIOS (3)
-#define MGMT_FLASHROM_OPTYPE_CODE_CTRLS (4)
-#define MGMT_FLASHROM_OPTYPE_CFG_IPSEC (5)
-#define MGMT_FLASHROM_OPTYPE_CFG_INI (6)
-#define MGMT_FLASHROM_OPTYPE_ROM_OFFSET_SPECIFIED (7)
-
-/*
- * --- FLASHROM_TYPE ---
- * Flash ROM manufacturers supported in the f/w
- */
-#define INTEL (0)
-#define SPANSION (1)
-#define MICRON (2)
-
-/* --- DDR_CAS_TYPE --- */
-#define CAS_3 (0)
-#define CAS_4 (1)
-#define CAS_5 (2)
-
-/* --- DDR_SIZE_TYPE --- */
-#define SIZE_256MB (0)
-#define SIZE_512MB (1)
-
-/* --- DDR_MODE_TYPE --- */
-#define DDR_NO_ECC (0)
-#define DDR_ECC (1)
-
-/* --- INTERFACE_10GB_TYPE --- */
-#define CX4_TYPE (0)
-#define XFP_TYPE (1)
-
-/* --- BE_CHIP_MAX_MTU --- */
-#define CHIP_MAX_MTU (9000)
-
-/* --- XAUI_STATE_ENUM --- */
-#define XAUI_STATE_ENABLE (0) /* This MUST be the default
- value for all requests
- which set/change
- equalization parameter. */
-#define XAUI_STATE_DISABLE (255) /* The XAUI for both ports
- may be disabled for EMI
- tests. There is no
- provision for turning off
- individual ports.
- */
-/* --- BE_ASIC_REVISION --- */
-#define BE_ASIC_REV_A0 (1)
-#define BE_ASIC_REV_A1 (2)
-
-#endif /* __fwcmd_common_amap_h__ */
diff --git a/drivers/staging/benet/fwcmd_common_bmap.h b/drivers/staging/benet/fwcmd_common_bmap.h
deleted file mode 100644
index a007cf2..0000000
--- a/drivers/staging/benet/fwcmd_common_bmap.h
+++ /dev/null
@@ -1,717 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_common_bmap_h__
-#define __fwcmd_common_bmap_h__
-#include "fwcmd_types_bmap.h"
-#include "fwcmd_hdr_bmap.h"
-
-#if defined(__BIG_ENDIAN)
- /* Physical Address. */
-struct PHYS_ADDR {
- union {
- struct {
- u32 lo; /* DWORD 0 */
- u32 hi; /* DWORD 1 */
- } __packed; /* unnamed struct */
- u32 dw[2]; /* dword union */
- }; /* unnamed union */
-} __packed ;
-
-
-#else
- /* Physical Address. */
-struct PHYS_ADDR {
- union {
- struct {
- u32 lo; /* DWORD 0 */
- u32 hi; /* DWORD 1 */
- } __packed; /* unnamed struct */
- u32 dw[2]; /* dword union */
- }; /* unnamed union */
-} __packed ;
-
-struct BE_LINK_STATUS {
- u8 mac0_duplex;
- u8 mac0_speed;
- u8 mac1_duplex;
- u8 mac1_speed;
- u8 mgmt_mac_duplex;
- u8 mgmt_mac_speed;
- u8 active_port;
- u8 rsvd0;
- u8 mac0_fault;
- u8 mac1_fault;
- u16 rsvd1;
-} __packed;
-#endif
-
-struct FWCMD_COMMON_ANON_170_REQUEST {
- u32 rsvd0;
-} __packed;
-
-union LINK_STATUS_QUERY_PARAMS {
- struct BE_LINK_STATUS response;
- struct FWCMD_COMMON_ANON_170_REQUEST request;
-} __packed;
-
-/*
- * Queries the the link status for all ports. The valid values below
- * DO NOT indicate that a particular duplex or speed is supported by
- * BladeEngine. These enumerations simply list all possible duplexes
- * and speeds for any port. Consult BladeEngine product documentation
- * for the supported parameters.
- */
-struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY {
- union FWCMD_HEADER header;
- union LINK_STATUS_QUERY_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_171_REQUEST {
- u8 type;
- u8 port;
- u8 mac1;
- u8 permanent;
-} __packed;
-
-struct FWCMD_COMMON_ANON_172_RESPONSE {
- struct MAC_ADDRESS_FORMAT mac;
-} __packed;
-
-union NTWK_MAC_QUERY_PARAMS {
- struct FWCMD_COMMON_ANON_171_REQUEST request;
- struct FWCMD_COMMON_ANON_172_RESPONSE response;
-} __packed;
-
-/* Queries one MAC address. */
-struct FWCMD_COMMON_NTWK_MAC_QUERY {
- union FWCMD_HEADER header;
- union NTWK_MAC_QUERY_PARAMS params;
-} __packed;
-
-struct MAC_SET_PARAMS_IN {
- u8 type;
- u8 port;
- u8 mac1;
- u8 invalidate;
- struct MAC_ADDRESS_FORMAT mac;
-} __packed;
-
-struct MAC_SET_PARAMS_OUT {
- u32 rsvd0;
-} __packed;
-
-union MAC_SET_PARAMS {
- struct MAC_SET_PARAMS_IN request;
- struct MAC_SET_PARAMS_OUT response;
-} __packed;
-
-/* Sets a MAC address. */
-struct FWCMD_COMMON_NTWK_MAC_SET {
- union FWCMD_HEADER header;
- union MAC_SET_PARAMS params;
-} __packed;
-
-/* MAC address list. */
-struct NTWK_MULTICAST_MAC_LIST {
- u8 byte[6];
-} __packed;
-
-struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD {
- u16 num_mac;
- u8 promiscuous;
- u8 rsvd0;
- struct NTWK_MULTICAST_MAC_LIST mac[32];
-} __packed;
-
-struct FWCMD_COMMON_ANON_174_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_173_PARAMS {
- struct FWCMD_COMMON_NTWK_MULTICAST_SET_REQUEST_PAYLOAD request;
- struct FWCMD_COMMON_ANON_174_RESPONSE response;
-} __packed;
-
-/*
- * Sets multicast address hash. The MPU will merge the MAC address lists
- * from all clients, including the networking and storage functions.
- * This command may fail if the final merged list of MAC addresses exceeds
- * 32 entries.
- */
-struct FWCMD_COMMON_NTWK_MULTICAST_SET {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_173_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD {
- u16 num_vlan;
- u8 promiscuous;
- u8 rsvd0;
- u16 vlan_tag[32];
-} __packed;
-
-struct FWCMD_COMMON_ANON_176_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_175_PARAMS {
- struct FWCMD_COMMON_NTWK_VLAN_CONFIG_REQUEST_PAYLOAD request;
- struct FWCMD_COMMON_ANON_176_RESPONSE response;
-} __packed;
-
-/*
- * Sets VLAN tag filter. The MPU will merge the VLAN tag list from all
- * clients, including the networking and storage functions. This command
- * may fail if the final vlan_tag array (from all functions) is longer
- * than 32 entries.
- */
-struct FWCMD_COMMON_NTWK_VLAN_CONFIG {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_175_PARAMS params;
-} __packed;
-
-struct RING_DESTROY_REQUEST {
- u16 ring_type;
- u16 id;
- u8 bypass_flush;
- u8 rsvd0;
- u16 rsvd1;
-} __packed;
-
-struct FWCMD_COMMON_ANON_190_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_189_PARAMS {
- struct RING_DESTROY_REQUEST request;
- struct FWCMD_COMMON_ANON_190_RESPONSE response;
-} __packed;
-/*
- * Command for destroying any ring. The connection(s) using the ring should
- * be quiesced before destroying the ring.
- */
-struct FWCMD_COMMON_RING_DESTROY {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_189_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_192_REQUEST {
- u16 num_pages;
- u16 rsvd0;
- struct CQ_CONTEXT_AMAP context;
- struct PHYS_ADDR pages[4];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_193_RESPONSE {
- u16 cq_id;
-} __packed ;
-
-union FWCMD_COMMON_ANON_191_PARAMS {
- struct FWCMD_COMMON_ANON_192_REQUEST request;
- struct FWCMD_COMMON_ANON_193_RESPONSE response;
-} __packed ;
-
-/*
- * Command for creating a completion queue. A Completion Queue must span
- * at least 1 page and at most 4 pages. Each completion queue entry
- * is 16 bytes regardless of CQ entry format. Thus the ring must be
- * at least 256 entries deep (corresponding to 1 page) and can be at
- * most 1024 entries deep (corresponding to 4 pages). The number of
- * pages posted must contain the CQ ring size as encoded in the context.
- *
- */
-struct FWCMD_COMMON_CQ_CREATE {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_191_PARAMS params;
-} __packed ;
-
-struct FWCMD_COMMON_ANON_198_REQUEST {
- u16 num_pages;
- u16 rsvd0;
- struct EQ_CONTEXT_AMAP context;
- struct PHYS_ADDR pages[8];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_199_RESPONSE {
- u16 eq_id;
-} __packed ;
-
-union FWCMD_COMMON_ANON_197_PARAMS {
- struct FWCMD_COMMON_ANON_198_REQUEST request;
- struct FWCMD_COMMON_ANON_199_RESPONSE response;
-} __packed ;
-
-/*
- * Command for creating a event queue. An Event Queue must span at least
- * 1 page and at most 8 pages. The number of pages posted must contain
- * the EQ ring. The ring is defined by the size of the EQ entries (encoded
- * in the context) and the number of EQ entries (also encoded in the
- * context).
- */
-struct FWCMD_COMMON_EQ_CREATE {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_197_PARAMS params;
-} __packed ;
-
-struct FWCMD_COMMON_ANON_201_REQUEST {
- u16 cq_id;
- u16 bcmc_cq_id;
- u16 num_pages;
- u16 rsvd0;
- struct PHYS_ADDR pages[2];
-} __packed;
-
-struct FWCMD_COMMON_ANON_202_RESPONSE {
- u16 id;
-} __packed;
-
-union FWCMD_COMMON_ANON_200_PARAMS {
- struct FWCMD_COMMON_ANON_201_REQUEST request;
- struct FWCMD_COMMON_ANON_202_RESPONSE response;
-} __packed;
-
-/*
- * Command for creating Ethernet receive ring. An ERX ring contains ETH_RX_D
- * entries (8 bytes each). An ERX ring must be 1024 entries deep
- * (corresponding to 2 pages).
- */
-struct FWCMD_COMMON_ETH_RX_CREATE {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_200_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_204_REQUEST {
- u16 num_pages;
- u8 ulp_num;
- u8 type;
- struct ETX_CONTEXT_AMAP context;
- struct PHYS_ADDR pages[8];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_205_RESPONSE {
- u16 cid;
- u8 ulp_num;
- u8 rsvd0;
-} __packed ;
-
-union FWCMD_COMMON_ANON_203_PARAMS {
- struct FWCMD_COMMON_ANON_204_REQUEST request;
- struct FWCMD_COMMON_ANON_205_RESPONSE response;
-} __packed ;
-
-/*
- * Command for creating an Ethernet transmit ring. An ETX ring contains
- * ETH_WRB entries (16 bytes each). An ETX ring must be at least 256
- * entries deep (corresponding to 1 page) and at most 2k entries deep
- * (corresponding to 8 pages).
- */
-struct FWCMD_COMMON_ETH_TX_CREATE {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_203_PARAMS params;
-} __packed ;
-
-struct FWCMD_COMMON_ANON_222_REQUEST {
- u16 num_pages;
- u16 rsvd0;
- struct MCC_RING_CONTEXT_AMAP context;
- struct PHYS_ADDR pages[8];
-} __packed ;
-
-struct FWCMD_COMMON_ANON_223_RESPONSE {
- u16 id;
-} __packed ;
-
-union FWCMD_COMMON_ANON_221_PARAMS {
- struct FWCMD_COMMON_ANON_222_REQUEST request;
- struct FWCMD_COMMON_ANON_223_RESPONSE response;
-} __packed ;
-
-/*
- * Command for creating the MCC ring. An MCC ring must be at least 16
- * entries deep (corresponding to 1 page) and at most 128 entries deep
- * (corresponding to 8 pages).
- */
-struct FWCMD_COMMON_MCC_CREATE {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_221_PARAMS params;
-} __packed ;
-
-struct GET_QOS_IN {
- u32 qos_params_rsvd;
-} __packed;
-
-struct GET_QOS_OUT {
- u32 max_bits_per_second_NIC;
- u32 max_packets_per_second_NIC;
- u32 max_ios_per_second_iSCSI;
- u32 max_bytes_per_second_iSCSI;
- u16 domain_VLAN_tag;
- u16 fabric_domain_ID;
- u32 qos_params_oem[4];
-} __packed;
-
-union GET_QOS_PARAMS {
- struct GET_QOS_IN request;
- struct GET_QOS_OUT response;
-} __packed;
-
-/* QOS/Bandwidth settings per domain. Applicable only in VMs. */
-struct FWCMD_COMMON_GET_QOS {
- union FWCMD_HEADER header;
- union GET_QOS_PARAMS params;
-} __packed;
-
-struct SET_QOS_IN {
- u32 valid_flags;
- u32 max_bits_per_second_NIC;
- u32 max_packets_per_second_NIC;
- u32 max_ios_per_second_iSCSI;
- u32 max_bytes_per_second_iSCSI;
- u16 domain_VLAN_tag;
- u16 fabric_domain_ID;
- u32 qos_params_oem[4];
-} __packed;
-
-struct SET_QOS_OUT {
- u32 qos_params_rsvd;
-} __packed;
-
-union SET_QOS_PARAMS {
- struct SET_QOS_IN request;
- struct SET_QOS_OUT response;
-} __packed;
-
-/* QOS/Bandwidth settings per domain. Applicable only in VMs. */
-struct FWCMD_COMMON_SET_QOS {
- union FWCMD_HEADER header;
- union SET_QOS_PARAMS params;
-} __packed;
-
-struct SET_FRAME_SIZE_IN {
- u32 max_tx_frame_size;
- u32 max_rx_frame_size;
-} __packed;
-
-struct SET_FRAME_SIZE_OUT {
- u32 chip_max_tx_frame_size;
- u32 chip_max_rx_frame_size;
-} __packed;
-
-union SET_FRAME_SIZE_PARAMS {
- struct SET_FRAME_SIZE_IN request;
- struct SET_FRAME_SIZE_OUT response;
-} __packed;
-
-/* Set frame size command. Only host domain may issue this command. */
-struct FWCMD_COMMON_SET_FRAME_SIZE {
- union FWCMD_HEADER header;
- union SET_FRAME_SIZE_PARAMS params;
-} __packed;
-
-struct FORCE_FAILOVER_IN {
- u32 move_to_port;
- u32 failover_config;
-} __packed;
-
-struct FWCMD_COMMON_ANON_231_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_230_PARAMS {
- struct FORCE_FAILOVER_IN request;
- struct FWCMD_COMMON_ANON_231_RESPONSE response;
-} __packed;
-
-/*
- * Use this command to control failover in BladeEngine. It may be used
- * to failback to a restored port or to forcibly move traffic from
- * one port to another. It may also be used to enable or disable the
- * automatic failover feature. This command can only be issued by domain
- * 0.
- */
-struct FWCMD_COMMON_FORCE_FAILOVER {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_230_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_240_REQUEST {
- u64 context;
-} __packed;
-
-struct FWCMD_COMMON_ANON_241_RESPONSE {
- u64 context;
-} __packed;
-
-union FWCMD_COMMON_ANON_239_PARAMS {
- struct FWCMD_COMMON_ANON_240_REQUEST request;
- struct FWCMD_COMMON_ANON_241_RESPONSE response;
-} __packed;
-
-/*
- * This command can be used by clients as a no-operation request. Typical
- * uses for drivers are as a heartbeat mechanism, or deferred processing
- * catalyst. The ARM will always complete this command with a good completion.
- * The 64-bit parameter is not touched by the ARM processor.
- */
-struct FWCMD_COMMON_NOP {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_239_PARAMS params;
-} __packed;
-
-struct NTWK_RX_FILTER_SETTINGS {
- u8 promiscuous;
- u8 ip_cksum;
- u8 tcp_cksum;
- u8 udp_cksum;
- u8 pass_err;
- u8 pass_ckerr;
- u8 strip_crc;
- u8 mcast_en;
- u8 bcast_en;
- u8 mcast_promiscuous_en;
- u8 unicast_en;
- u8 vlan_promiscuous;
-} __packed;
-
-union FWCMD_COMMON_ANON_242_PARAMS {
- struct NTWK_RX_FILTER_SETTINGS request;
- struct NTWK_RX_FILTER_SETTINGS response;
-} __packed;
-
-/*
- * This command is used to modify the ethernet receive filter configuration.
- * Only domain 0 network function drivers may issue this command. The
- * applied configuration is returned in the response payload. Note:
- * Some receive packet filter settings are global on BladeEngine and
- * can affect both the storage and network function clients that the
- * BladeEngine hardware and firmware serve. Additionaly, depending
- * on the revision of BladeEngine, some ethernet receive filter settings
- * are dependent on others. If a dependency exists between settings
- * for the BladeEngine revision, and the command request settings do
- * not meet the dependency requirement, the invalid settings will not
- * be applied despite the comand succeeding. For example: a driver may
- * request to enable broadcast packets, but not enable multicast packets.
- * On early revisions of BladeEngine, there may be no distinction between
- * broadcast and multicast filters, so broadcast could not be enabled
- * without enabling multicast. In this scenario, the comand would still
- * succeed, but the response payload would indicate the previously
- * configured broadcast and multicast setting.
- */
-struct FWCMD_COMMON_NTWK_RX_FILTER {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_242_PARAMS params;
-} __packed;
-
-
-struct FWCMD_COMMON_ANON_244_REQUEST {
- u32 rsvd0;
-} __packed;
-
-struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD {
- u8 firmware_version_string[32];
- u8 fw_on_flash_version_string[32];
-} __packed;
-
-union FWCMD_COMMON_ANON_243_PARAMS {
- struct FWCMD_COMMON_ANON_244_REQUEST request;
- struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD response;
-} __packed;
-
-/* This comand retrieves the firmware version. */
-struct FWCMD_COMMON_GET_FW_VERSION {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_243_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_246_REQUEST {
- u16 tx_flow_control;
- u16 rx_flow_control;
-} __packed;
-
-struct FWCMD_COMMON_ANON_247_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_245_PARAMS {
- struct FWCMD_COMMON_ANON_246_REQUEST request;
- struct FWCMD_COMMON_ANON_247_RESPONSE response;
-} __packed;
-
-/*
- * This comand is used to program BladeEngine flow control behavior.
- * Only the host networking driver is allowed to use this comand.
- */
-struct FWCMD_COMMON_SET_FLOW_CONTROL {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_245_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_249_REQUEST {
- u32 rsvd0;
-} __packed;
-
-struct FWCMD_COMMON_ANON_250_RESPONSE {
- u16 tx_flow_control;
- u16 rx_flow_control;
-} __packed;
-
-union FWCMD_COMMON_ANON_248_PARAMS {
- struct FWCMD_COMMON_ANON_249_REQUEST request;
- struct FWCMD_COMMON_ANON_250_RESPONSE response;
-} __packed;
-
-/* This comand is used to read BladeEngine flow control settings. */
-struct FWCMD_COMMON_GET_FLOW_CONTROL {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_248_PARAMS params;
-} __packed;
-
-struct EQ_DELAY_PARAMS {
- u32 eq_id;
- u32 delay_in_microseconds;
-} __packed;
-
-struct FWCMD_COMMON_ANON_257_REQUEST {
- u32 num_eq;
- u32 rsvd0;
- struct EQ_DELAY_PARAMS delay[16];
-} __packed;
-
-struct FWCMD_COMMON_ANON_258_RESPONSE {
- u32 delay_resolution_in_microseconds;
- u32 delay_max_in_microseconds;
-} __packed;
-
-union MODIFY_EQ_DELAY_PARAMS {
- struct FWCMD_COMMON_ANON_257_REQUEST request;
- struct FWCMD_COMMON_ANON_258_RESPONSE response;
-} __packed;
-
-/* This comand changes the EQ delay for a given set of EQs. */
-struct FWCMD_COMMON_MODIFY_EQ_DELAY {
- union FWCMD_HEADER header;
- union MODIFY_EQ_DELAY_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_260_REQUEST {
- u32 rsvd0;
-} __packed;
-
-struct BE_FIRMWARE_CONFIG {
- u16 be_config_number;
- u16 asic_revision;
- u32 nic_ulp_mask;
- u32 tulp_mask;
- u32 iscsi_ulp_mask;
- u32 rdma_ulp_mask;
- u32 rsvd0[4];
- u32 eth_tx_id_start;
- u32 eth_tx_id_count;
- u32 eth_rx_id_start;
- u32 eth_rx_id_count;
- u32 tpm_wrbq_id_start;
- u32 tpm_wrbq_id_count;
- u32 tpm_defq_id_start;
- u32 tpm_defq_id_count;
- u32 iscsi_wrbq_id_start;
- u32 iscsi_wrbq_id_count;
- u32 iscsi_defq_id_start;
- u32 iscsi_defq_id_count;
- u32 rdma_qp_id_start;
- u32 rdma_qp_id_count;
- u32 rsvd1[8];
-} __packed;
-
-union FWCMD_COMMON_ANON_259_PARAMS {
- struct FWCMD_COMMON_ANON_260_REQUEST request;
- struct BE_FIRMWARE_CONFIG response;
-} __packed;
-
-/*
- * This comand queries the current firmware configuration parameters.
- * The static configuration type is defined by be_config_number. This
- * differentiates different BladeEngine builds, such as iSCSI Initiator
- * versus iSCSI Target. For a given static configuration, the Upper
- * Layer Protocol (ULP) processors may be reconfigured to support different
- * protocols. Each ULP processor supports one or more protocols. The
- * masks indicate which processors are configured for each protocol.
- * For a given static configuration, the number of TCP connections
- * supported for each protocol may vary. The *_id_start and *_id_count
- * variables define a linear range of IDs that are available for each
- * supported protocol. The *_id_count may be used by the driver to allocate
- * the appropriate number of connection resources. The *_id_start may
- * be used to map the arbitrary range of IDs to a zero-based range
- * of indices.
- */
-struct FWCMD_COMMON_FIRMWARE_CONFIG {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_259_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS {
- u32 emph_lev_sel_port0;
- u32 emph_lev_sel_port1;
- u8 xaui_vo_sel;
- u8 xaui_state;
- u16 rsvd0;
- u32 xaui_eq_vector;
-} __packed;
-
-struct FWCMD_COMMON_ANON_262_REQUEST {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_261_PARAMS {
- struct FWCMD_COMMON_ANON_262_REQUEST request;
- struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS response;
-} __packed;
-
-/*
- * This comand can be used to read XAUI equalization parameters. The
- * ARM firmware applies default equalization parameters during initialization.
- * These parameters may be customer-specific when derived from the
- * SEEPROM. See SEEPROM_DATA for equalization specific fields.
- */
-struct FWCMD_COMMON_GET_PORT_EQUALIZATION {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_261_PARAMS params;
-} __packed;
-
-struct FWCMD_COMMON_ANON_264_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_COMMON_ANON_263_PARAMS {
- struct FWCMD_COMMON_PORT_EQUALIZATION_PARAMS request;
- struct FWCMD_COMMON_ANON_264_RESPONSE response;
-} __packed;
-
-/*
- * This comand can be used to set XAUI equalization parameters. The ARM
- * firmware applies default equalization parameters during initialization.
- * These parameters may be customer-specific when derived from the
- * SEEPROM. See SEEPROM_DATA for equalization specific fields.
- */
-struct FWCMD_COMMON_SET_PORT_EQUALIZATION {
- union FWCMD_HEADER header;
- union FWCMD_COMMON_ANON_263_PARAMS params;
-} __packed;
-
-#endif /* __fwcmd_common_bmap_h__ */
diff --git a/drivers/staging/benet/fwcmd_eth_bmap.h b/drivers/staging/benet/fwcmd_eth_bmap.h
deleted file mode 100644
index 234b179..0000000
--- a/drivers/staging/benet/fwcmd_eth_bmap.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_eth_bmap_h__
-#define __fwcmd_eth_bmap_h__
-#include "fwcmd_hdr_bmap.h"
-#include "fwcmd_types_bmap.h"
-
-struct MIB_ETH_STATISTICS_PARAMS_IN {
- u32 rsvd0;
-} __packed;
-
-struct BE_RXF_STATS {
- u32 p0recvdtotalbytesLSD; /* DWORD 0 */
- u32 p0recvdtotalbytesMSD; /* DWORD 1 */
- u32 p0recvdtotalframes; /* DWORD 2 */
- u32 p0recvdunicastframes; /* DWORD 3 */
- u32 p0recvdmulticastframes; /* DWORD 4 */
- u32 p0recvdbroadcastframes; /* DWORD 5 */
- u32 p0crcerrors; /* DWORD 6 */
- u32 p0alignmentsymerrs; /* DWORD 7 */
- u32 p0pauseframesrecvd; /* DWORD 8 */
- u32 p0controlframesrecvd; /* DWORD 9 */
- u32 p0inrangelenerrors; /* DWORD 10 */
- u32 p0outrangeerrors; /* DWORD 11 */
- u32 p0frametoolongerrors; /* DWORD 12 */
- u32 p0droppedaddressmatch; /* DWORD 13 */
- u32 p0droppedvlanmismatch; /* DWORD 14 */
- u32 p0ipdroppedtoosmall; /* DWORD 15 */
- u32 p0ipdroppedtooshort; /* DWORD 16 */
- u32 p0ipdroppedhdrtoosmall; /* DWORD 17 */
- u32 p0tcpdroppedlen; /* DWORD 18 */
- u32 p0droppedrunt; /* DWORD 19 */
- u32 p0recvd64; /* DWORD 20 */
- u32 p0recvd65_127; /* DWORD 21 */
- u32 p0recvd128_256; /* DWORD 22 */
- u32 p0recvd256_511; /* DWORD 23 */
- u32 p0recvd512_1023; /* DWORD 24 */
- u32 p0recvd1518_1522; /* DWORD 25 */
- u32 p0recvd1522_2047; /* DWORD 26 */
- u32 p0recvd2048_4095; /* DWORD 27 */
- u32 p0recvd4096_8191; /* DWORD 28 */
- u32 p0recvd8192_9216; /* DWORD 29 */
- u32 p0rcvdipcksmerrs; /* DWORD 30 */
- u32 p0recvdtcpcksmerrs; /* DWORD 31 */
- u32 p0recvdudpcksmerrs; /* DWORD 32 */
- u32 p0recvdnonrsspackets; /* DWORD 33 */
- u32 p0recvdippackets; /* DWORD 34 */
- u32 p0recvdchute1packets; /* DWORD 35 */
- u32 p0recvdchute2packets; /* DWORD 36 */
- u32 p0recvdchute3packets; /* DWORD 37 */
- u32 p0recvdipsecpackets; /* DWORD 38 */
- u32 p0recvdmanagementpackets; /* DWORD 39 */
- u32 p0xmitbyteslsd; /* DWORD 40 */
- u32 p0xmitbytesmsd; /* DWORD 41 */
- u32 p0xmitunicastframes; /* DWORD 42 */
- u32 p0xmitmulticastframes; /* DWORD 43 */
- u32 p0xmitbroadcastframes; /* DWORD 44 */
- u32 p0xmitpauseframes; /* DWORD 45 */
- u32 p0xmitcontrolframes; /* DWORD 46 */
- u32 p0xmit64; /* DWORD 47 */
- u32 p0xmit65_127; /* DWORD 48 */
- u32 p0xmit128_256; /* DWORD 49 */
- u32 p0xmit256_511; /* DWORD 50 */
- u32 p0xmit512_1023; /* DWORD 51 */
- u32 p0xmit1518_1522; /* DWORD 52 */
- u32 p0xmit1522_2047; /* DWORD 53 */
- u32 p0xmit2048_4095; /* DWORD 54 */
- u32 p0xmit4096_8191; /* DWORD 55 */
- u32 p0xmit8192_9216; /* DWORD 56 */
- u32 p0rxfifooverflowdropped; /* DWORD 57 */
- u32 p0ipseclookupfaileddropped; /* DWORD 58 */
- u32 p1recvdtotalbytesLSD; /* DWORD 59 */
- u32 p1recvdtotalbytesMSD; /* DWORD 60 */
- u32 p1recvdtotalframes; /* DWORD 61 */
- u32 p1recvdunicastframes; /* DWORD 62 */
- u32 p1recvdmulticastframes; /* DWORD 63 */
- u32 p1recvdbroadcastframes; /* DWORD 64 */
- u32 p1crcerrors; /* DWORD 65 */
- u32 p1alignmentsymerrs; /* DWORD 66 */
- u32 p1pauseframesrecvd; /* DWORD 67 */
- u32 p1controlframesrecvd; /* DWORD 68 */
- u32 p1inrangelenerrors; /* DWORD 69 */
- u32 p1outrangeerrors; /* DWORD 70 */
- u32 p1frametoolongerrors; /* DWORD 71 */
- u32 p1droppedaddressmatch; /* DWORD 72 */
- u32 p1droppedvlanmismatch; /* DWORD 73 */
- u32 p1ipdroppedtoosmall; /* DWORD 74 */
- u32 p1ipdroppedtooshort; /* DWORD 75 */
- u32 p1ipdroppedhdrtoosmall; /* DWORD 76 */
- u32 p1tcpdroppedlen; /* DWORD 77 */
- u32 p1droppedrunt; /* DWORD 78 */
- u32 p1recvd64; /* DWORD 79 */
- u32 p1recvd65_127; /* DWORD 80 */
- u32 p1recvd128_256; /* DWORD 81 */
- u32 p1recvd256_511; /* DWORD 82 */
- u32 p1recvd512_1023; /* DWORD 83 */
- u32 p1recvd1518_1522; /* DWORD 84 */
- u32 p1recvd1522_2047; /* DWORD 85 */
- u32 p1recvd2048_4095; /* DWORD 86 */
- u32 p1recvd4096_8191; /* DWORD 87 */
- u32 p1recvd8192_9216; /* DWORD 88 */
- u32 p1rcvdipcksmerrs; /* DWORD 89 */
- u32 p1recvdtcpcksmerrs; /* DWORD 90 */
- u32 p1recvdudpcksmerrs; /* DWORD 91 */
- u32 p1recvdnonrsspackets; /* DWORD 92 */
- u32 p1recvdippackets; /* DWORD 93 */
- u32 p1recvdchute1packets; /* DWORD 94 */
- u32 p1recvdchute2packets; /* DWORD 95 */
- u32 p1recvdchute3packets; /* DWORD 96 */
- u32 p1recvdipsecpackets; /* DWORD 97 */
- u32 p1recvdmanagementpackets; /* DWORD 98 */
- u32 p1xmitbyteslsd; /* DWORD 99 */
- u32 p1xmitbytesmsd; /* DWORD 100 */
- u32 p1xmitunicastframes; /* DWORD 101 */
- u32 p1xmitmulticastframes; /* DWORD 102 */
- u32 p1xmitbroadcastframes; /* DWORD 103 */
- u32 p1xmitpauseframes; /* DWORD 104 */
- u32 p1xmitcontrolframes; /* DWORD 105 */
- u32 p1xmit64; /* DWORD 106 */
- u32 p1xmit65_127; /* DWORD 107 */
- u32 p1xmit128_256; /* DWORD 108 */
- u32 p1xmit256_511; /* DWORD 109 */
- u32 p1xmit512_1023; /* DWORD 110 */
- u32 p1xmit1518_1522; /* DWORD 111 */
- u32 p1xmit1522_2047; /* DWORD 112 */
- u32 p1xmit2048_4095; /* DWORD 113 */
- u32 p1xmit4096_8191; /* DWORD 114 */
- u32 p1xmit8192_9216; /* DWORD 115 */
- u32 p1rxfifooverflowdropped; /* DWORD 116 */
- u32 p1ipseclookupfaileddropped; /* DWORD 117 */
- u32 pxdroppednopbuf; /* DWORD 118 */
- u32 pxdroppednotxpb; /* DWORD 119 */
- u32 pxdroppednoipsecbuf; /* DWORD 120 */
- u32 pxdroppednoerxdescr; /* DWORD 121 */
- u32 pxdroppednotpredescr; /* DWORD 122 */
- u32 pxrecvdmanagementportpackets; /* DWORD 123 */
- u32 pxrecvdmanagementportbytes; /* DWORD 124 */
- u32 pxrecvdmanagementportpauseframes; /* DWORD 125 */
- u32 pxrecvdmanagementporterrors; /* DWORD 126 */
- u32 pxxmitmanagementportpackets; /* DWORD 127 */
- u32 pxxmitmanagementportbytes; /* DWORD 128 */
- u32 pxxmitmanagementportpause; /* DWORD 129 */
- u32 pxxmitmanagementportrxfifooverflow; /* DWORD 130 */
- u32 pxrecvdipsecipcksmerrs; /* DWORD 131 */
- u32 pxrecvdtcpsecipcksmerrs; /* DWORD 132 */
- u32 pxrecvdudpsecipcksmerrs; /* DWORD 133 */
- u32 pxipsecrunt; /* DWORD 134 */
- u32 pxipsecaddressmismatchdropped; /* DWORD 135 */
- u32 pxipsecrxfifooverflowdropped; /* DWORD 136 */
- u32 pxipsecframestoolong; /* DWORD 137 */
- u32 pxipsectotalipframes; /* DWORD 138 */
- u32 pxipseciptoosmall; /* DWORD 139 */
- u32 pxipseciptooshort; /* DWORD 140 */
- u32 pxipseciphdrtoosmall; /* DWORD 141 */
- u32 pxipsectcphdrbad; /* DWORD 142 */
- u32 pxrecvdipsecchute1; /* DWORD 143 */
- u32 pxrecvdipsecchute2; /* DWORD 144 */
- u32 pxrecvdipsecchute3; /* DWORD 145 */
- u32 pxdropped7frags; /* DWORD 146 */
- u32 pxdroppedfrags; /* DWORD 147 */
- u32 pxdroppedinvalidfragring; /* DWORD 148 */
- u32 pxnumforwardedpackets; /* DWORD 149 */
-} __packed;
-
-union MIB_ETH_STATISTICS_PARAMS {
- struct MIB_ETH_STATISTICS_PARAMS_IN request;
- struct BE_RXF_STATS response;
-} __packed;
-
-/*
- * Query ethernet statistics. All domains may issue this command. The
- * host domain drivers may optionally reset internal statistic counters
- * with a query.
- */
-struct FWCMD_ETH_GET_STATISTICS {
- union FWCMD_HEADER header;
- union MIB_ETH_STATISTICS_PARAMS params;
-} __packed;
-
-
-struct FWCMD_ETH_ANON_175_REQUEST {
- u8 port0_promiscuous;
- u8 port1_promiscuous;
- u16 rsvd0;
-} __packed;
-
-struct FWCMD_ETH_ANON_176_RESPONSE {
- u32 rsvd0;
-} __packed;
-
-union FWCMD_ETH_ANON_174_PARAMS {
- struct FWCMD_ETH_ANON_175_REQUEST request;
- struct FWCMD_ETH_ANON_176_RESPONSE response;
-} __packed;
-
-/* Enables/Disables promiscuous ethernet receive mode. */
-struct FWCMD_ETH_PROMISCUOUS {
- union FWCMD_HEADER header;
- union FWCMD_ETH_ANON_174_PARAMS params;
-} __packed;
-
-struct FWCMD_ETH_ANON_178_REQUEST {
- u32 new_fragsize_log2;
-} __packed;
-
-struct FWCMD_ETH_ANON_179_RESPONSE {
- u32 actual_fragsize_log2;
-} __packed;
-
-union FWCMD_ETH_ANON_177_PARAMS {
- struct FWCMD_ETH_ANON_178_REQUEST request;
- struct FWCMD_ETH_ANON_179_RESPONSE response;
-} __packed;
-
-/*
- * Sets the Ethernet RX fragment size. Only host (domain 0) networking
- * drivers may issue this command. This call will fail for non-host
- * protection domains. In this situation the MCC CQ status will indicate
- * a failure due to insufficient priviledges. The response should be
- * ignored, and the driver should use the FWCMD_ETH_GET_FRAG_SIZE to
- * query the existing ethernet receive fragment size. It must use this
- * fragment size for all fragments in the ethernet receive ring. If
- * the command succeeds, the driver must use the frag size indicated
- * in the command response since the requested frag size may not be applied
- * until the next reboot. When the requested fragsize matches the response
- * fragsize, this indicates the request was applied immediately.
- */
-struct FWCMD_ETH_SET_RX_FRAG_SIZE {
- union FWCMD_HEADER header;
- union FWCMD_ETH_ANON_177_PARAMS params;
-} __packed;
-
-struct FWCMD_ETH_ANON_181_REQUEST {
- u32 rsvd0;
-} __packed;
-
-struct FWCMD_ETH_ANON_182_RESPONSE {
- u32 actual_fragsize_log2;
-} __packed;
-
-union FWCMD_ETH_ANON_180_PARAMS {
- struct FWCMD_ETH_ANON_181_REQUEST request;
- struct FWCMD_ETH_ANON_182_RESPONSE response;
-} __packed;
-
-/*
- * Queries the Ethernet RX fragment size. All domains may issue this
- * command. The driver should call this command to determine the minimum
- * required fragment size for the ethernet RX ring buffers. Drivers
- * may choose to use a larger size for each fragment buffer, but BladeEngine
- * will use up to the configured minimum required fragsize in each ethernet
- * receive fragment buffer. For example, if the ethernet receive fragment
- * size is configured to 4kB, and a driver uses 8kB fragments, a 6kB
- * ethernet packet received by BladeEngine will be split accross two
- * of the driver's receive framgents (4kB in one fragment buffer, and
- * 2kB in the subsequent fragment buffer).
- */
-struct FWCMD_ETH_GET_RX_FRAG_SIZE {
- union FWCMD_HEADER header;
- union FWCMD_ETH_ANON_180_PARAMS params;
-} __packed;
-
-#endif /* __fwcmd_eth_bmap_h__ */
diff --git a/drivers/staging/benet/fwcmd_hdr_bmap.h b/drivers/staging/benet/fwcmd_hdr_bmap.h
deleted file mode 100644
index 28b4532..0000000
--- a/drivers/staging/benet/fwcmd_hdr_bmap.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_hdr_bmap_h__
-#define __fwcmd_hdr_bmap_h__
-
-struct FWCMD_REQUEST_HEADER {
- u8 opcode;
- u8 subsystem;
- u8 port_number;
- u8 domain;
- u32 timeout;
- u32 request_length;
- u32 rsvd0;
-} __packed;
-
-struct FWCMD_RESPONSE_HEADER {
- u8 opcode;
- u8 subsystem;
- u8 rsvd0;
- u8 domain;
- u8 status;
- u8 additional_status;
- u16 rsvd1;
- u32 response_length;
- u32 actual_response_length;
-} __packed;
-
-/*
- * The firmware/driver overwrites the input FWCMD_REQUEST_HEADER with
- * the output FWCMD_RESPONSE_HEADER.
- */
-union FWCMD_HEADER {
- struct FWCMD_REQUEST_HEADER request;
- struct FWCMD_RESPONSE_HEADER response;
-} __packed;
-
-#endif /* __fwcmd_hdr_bmap_h__ */
diff --git a/drivers/staging/benet/fwcmd_mcc.h b/drivers/staging/benet/fwcmd_mcc.h
deleted file mode 100644
index 9eeca878..0000000
--- a/drivers/staging/benet/fwcmd_mcc.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_mcc_amap_h__
-#define __fwcmd_mcc_amap_h__
-#include "fwcmd_opcodes.h"
-/*
- * Where applicable, a WRB, may contain a list of Scatter-gather elements.
- * Each element supports a 64 bit address and a 32bit length field.
- */
-struct BE_MCC_SGE_AMAP {
- u8 pa_lo[32]; /* DWORD 0 */
- u8 pa_hi[32]; /* DWORD 1 */
- u8 length[32]; /* DWORD 2 */
-} __packed;
-struct MCC_SGE_AMAP {
- u32 dw[3];
-};
-/*
- * The design of an MCC_SGE allows up to 19 elements to be embedded
- * in a WRB, supporting 64KB data transfers (assuming a 4KB page size).
- */
-struct BE_MCC_WRB_PAYLOAD_AMAP {
- union {
- struct BE_MCC_SGE_AMAP sgl[19];
- u8 embedded[59][32]; /* DWORD 0 */
- };
-} __packed;
-struct MCC_WRB_PAYLOAD_AMAP {
- u32 dw[59];
-};
-
-/*
- * This is the structure of the MCC Command WRB for commands
- * sent to the Management Processing Unit (MPU). See section
- * for usage in embedded and non-embedded modes.
- */
-struct BE_MCC_WRB_AMAP {
- u8 embedded; /* DWORD 0 */
- u8 rsvd0[2]; /* DWORD 0 */
- u8 sge_count[5]; /* DWORD 0 */
- u8 rsvd1[16]; /* DWORD 0 */
- u8 special[8]; /* DWORD 0 */
- u8 payload_length[32]; /* DWORD 1 */
- u8 tag[2][32]; /* DWORD 2 */
- u8 rsvd2[32]; /* DWORD 4 */
- struct BE_MCC_WRB_PAYLOAD_AMAP payload;
-} __packed;
-struct MCC_WRB_AMAP {
- u32 dw[64];
-};
-
-/* This is the structure of the MCC Completion queue entry */
-struct BE_MCC_CQ_ENTRY_AMAP {
- u8 completion_status[16]; /* DWORD 0 */
- u8 extended_status[16]; /* DWORD 0 */
- u8 mcc_tag[2][32]; /* DWORD 1 */
- u8 rsvd0[27]; /* DWORD 3 */
- u8 consumed; /* DWORD 3 */
- u8 completed; /* DWORD 3 */
- u8 hpi_buffer_completion; /* DWORD 3 */
- u8 async_event; /* DWORD 3 */
- u8 valid; /* DWORD 3 */
-} __packed;
-struct MCC_CQ_ENTRY_AMAP {
- u32 dw[4];
-};
-
-/* Mailbox structures used by the MPU during bootstrap */
-struct BE_MCC_MAILBOX_AMAP {
- struct BE_MCC_WRB_AMAP wrb;
- struct BE_MCC_CQ_ENTRY_AMAP cq;
-} __packed;
-struct MCC_MAILBOX_AMAP {
- u32 dw[68];
-};
-
-#endif /* __fwcmd_mcc_amap_h__ */
diff --git a/drivers/staging/benet/fwcmd_opcodes.h b/drivers/staging/benet/fwcmd_opcodes.h
deleted file mode 100644
index 23d5693..0000000
--- a/drivers/staging/benet/fwcmd_opcodes.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_opcodes_amap_h__
-#define __fwcmd_opcodes_amap_h__
-
-/*
- * --- FWCMD_SUBSYSTEMS ---
- * The commands are grouped into the following subsystems. The subsystem
- * code along with the opcode uniquely identify a particular fwcmd.
- */
-#define FWCMD_SUBSYSTEM_RSVD (0) /* This subsystem is reserved. It is */
- /* never used. */
-#define FWCMD_SUBSYSTEM_COMMON (1) /* CMDs in this group are common to
- * all subsystems. See
- * COMMON_SUBSYSTEM_OPCODES for opcodes
- * and Common Host Configuration CMDs
- * for the FWCMD descriptions.
- */
-#define FWCMD_SUBSYSTEM_COMMON_ISCSI (2) /* CMDs in this group are */
- /*
- * common to Initiator and Target. See
- * COMMON_ISCSI_SUBSYSTEM_OPCODES and
- * Common iSCSI Initiator and Target
- * CMDs for the command descriptions.
- */
-#define FWCMD_SUBSYSTEM_ETH (3) /* This subsystem is used to
- execute Ethernet commands. */
-
-#define FWCMD_SUBSYSTEM_TPM (4) /* This subsystem is used
- to execute TPM commands. */
-#define FWCMD_SUBSYSTEM_PXE_UNDI (5) /* This subsystem is used
- * to execute PXE
- * and UNDI specific commands.
- */
-
-#define FWCMD_SUBSYSTEM_ISCSI_INI (6) /* This subsystem is used to
- execute ISCSI Initiator
- specific commands.
- */
-#define FWCMD_SUBSYSTEM_ISCSI_TGT (7) /* This subsystem is used
- to execute iSCSI Target
- specific commands.between
- PTL and ARM firmware.
- */
-#define FWCMD_SUBSYSTEM_MILI_PTL (8) /* This subsystem is used to
- execute iSCSI Target specific
- commands.between MILI
- and PTL. */
-#define FWCMD_SUBSYSTEM_MILI_TMD (9) /* This subsystem is used to
- execute iSCSI Target specific
- commands between MILI
- and TMD. */
-#define FWCMD_SUBSYSTEM_PROXY (11) /* This subsystem is used
- to execute proxied commands
- within the host at the
- explicit request of a
- non priviledged domain.
- This 'subsystem' is entirely
- virtual from the controller
- and firmware perspective as
- it is implemented in host
- drivers.
- */
-
-/*
- * --- COMMON_SUBSYSTEM_OPCODES ---
- * These opcodes are common to both networking and storage PCI
- * functions. They are used to reserve resources and configure
- * BladeEngine. These opcodes all use the FWCMD_SUBSYSTEM_COMMON
- * subsystem code.
- */
-#define OPCODE_COMMON_NTWK_MAC_QUERY (1)
-#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
-#define SUBSYSTEM_COMMON_NTWK_MAC_SET (1)
-#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
-#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
-#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
-#define SUBSYSTEM_COMMON_READ_FLASHROM (1)
-#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
-#define SUBSYSTEM_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (1)
-#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
-#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
-#define SUBSYSTEM_COMMON_RING_DESTROY (1)
-#define SUBSYSTEM_COMMON_CQ_CREATE (1)
-#define SUBSYSTEM_COMMON_EQ_CREATE (1)
-#define SUBSYSTEM_COMMON_ETH_RX_CREATE (1)
-#define SUBSYSTEM_COMMON_ETH_TX_CREATE (1)
-#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
-#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
-#define SUBSYSTEM_COMMON_MCC_CREATE (1)
-#define SUBSYSTEM_COMMON_JELL_CONFIG (1)
-#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
-#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
-#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
-#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
-#define SUBSYSTEM_COMMON_GET_QOS (1)
-#define SUBSYSTEM_COMMON_SET_QOS (1)
-#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
-#define SUBSYSTEM_COMMON_SEEPROM_READ (1)
-#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
-#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
-#define SUBSYSTEM_COMMON_NOP (1)
-#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
-#define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
-#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
-#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
-#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
-#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
-#define SUBSYSTEM_COMMON_GET_FAT (1)
-#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
-#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
-#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
-#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
-#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
-#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
-#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
-#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
-#define SUBSYSTEM_COMMON_RED_CONFIG (1)
-#define OPCODE_COMMON_NTWK_MAC_SET (2)
-#define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
-#define OPCODE_COMMON_NTWK_VLAN_CONFIG (4)
-#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
-#define OPCODE_COMMON_READ_FLASHROM (6)
-#define OPCODE_COMMON_WRITE_FLASHROM (7)
-#define OPCODE_COMMON_QUERY_MAX_FWCMD_BUFFER_SIZE (8)
-#define OPCODE_COMMON_ADD_PAGE_TABLES (9)
-#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
-#define OPCODE_COMMON_RING_DESTROY (11)
-#define OPCODE_COMMON_CQ_CREATE (12)
-#define OPCODE_COMMON_EQ_CREATE (13)
-#define OPCODE_COMMON_ETH_RX_CREATE (14)
-#define OPCODE_COMMON_ETH_TX_CREATE (15)
-#define OPCODE_COMMON_NET_RESERVED0 (16) /* Reserved */
-#define OPCODE_COMMON_NET_RESERVED1 (17) /* Reserved */
-#define OPCODE_COMMON_NET_RESERVED2 (18) /* Reserved */
-#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
-#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
-#define OPCODE_COMMON_MCC_CREATE (21)
-#define OPCODE_COMMON_JELL_CONFIG (22)
-#define OPCODE_COMMON_FORCE_FAILOVER (23)
-#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
-#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
-#define OPCODE_COMMON_POST_ZERO_BUFFER (26)
-#define OPCODE_COMMON_GET_QOS (27)
-#define OPCODE_COMMON_SET_QOS (28)
-#define OPCODE_COMMON_TCP_GET_STATISTICS (29)
-#define OPCODE_COMMON_SEEPROM_READ (30)
-#define OPCODE_COMMON_TCP_STATE_QUERY (31)
-#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
-#define OPCODE_COMMON_NOP (33)
-#define OPCODE_COMMON_NTWK_RX_FILTER (34)
-#define OPCODE_COMMON_GET_FW_VERSION (35)
-#define OPCODE_COMMON_SET_FLOW_CONTROL (36)
-#define OPCODE_COMMON_GET_FLOW_CONTROL (37)
-#define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
-#define OPCODE_COMMON_SET_FRAME_SIZE (39)
-#define OPCODE_COMMON_GET_FAT (40)
-#define OPCODE_COMMON_MODIFY_EQ_DELAY (41)
-#define OPCODE_COMMON_FIRMWARE_CONFIG (42)
-#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
-#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
-#define OPCODE_COMMON_SET_VLD_CONFIG (45)
-#define OPCODE_COMMON_GET_VLD_CONFIG (46)
-#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
-#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
-#define OPCODE_COMMON_RED_CONFIG (49)
-
-
-
-/*
- * --- ETH_SUBSYSTEM_OPCODES ---
- * These opcodes are used for configuring the Ethernet interfaces. These
- * opcodes all use the FWCMD_SUBSYSTEM_ETH subsystem code.
- */
-#define OPCODE_ETH_RSS_CONFIG (1)
-#define OPCODE_ETH_ACPI_CONFIG (2)
-#define SUBSYSTEM_ETH_RSS_CONFIG (3)
-#define SUBSYSTEM_ETH_ACPI_CONFIG (3)
-#define OPCODE_ETH_PROMISCUOUS (3)
-#define SUBSYSTEM_ETH_PROMISCUOUS (3)
-#define SUBSYSTEM_ETH_GET_STATISTICS (3)
-#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE (3)
-#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE (3)
-#define OPCODE_ETH_GET_STATISTICS (4)
-#define OPCODE_ETH_GET_RX_FRAG_SIZE (5)
-#define OPCODE_ETH_SET_RX_FRAG_SIZE (6)
-
-
-
-
-
-/*
- * --- MCC_STATUS_CODE ---
- * These are the global status codes used by all subsystems
- */
-#define MCC_STATUS_SUCCESS (0) /* Indicates a successful
- completion of the command */
-#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1) /* The client does not have
- sufficient privileges to
- execute the command */
-#define MCC_STATUS_INVALID_PARAMETER (2) /* A parameter in the command
- was invalid. The extended
- status contains the index
- of the parameter */
-#define MCC_STATUS_INSUFFICIENT_RESOURCES (3) /* There are insufficient
- chip resources to execute
- the command */
-#define MCC_STATUS_QUEUE_FLUSHING (4) /* The command is completing
- because the queue was
- getting flushed */
-#define MCC_STATUS_DMA_FAILED (5) /* The command is completing
- with a DMA error */
-
-/*
- * --- MGMT_ERROR_CODES ---
- * Error Codes returned in the status field of the FWCMD response header
- */
-#define MGMT_STATUS_SUCCESS (0) /* The FWCMD completed
- without errors */
-#define MGMT_STATUS_FAILED (1) /* Error status in the Status
- field of the
- struct FWCMD_RESPONSE_HEADER */
-#define MGMT_STATUS_ILLEGAL_REQUEST (2) /* Invalid FWCMD opcode */
-#define MGMT_STATUS_ILLEGAL_FIELD (3) /* Invalid parameter in
- the FWCMD payload */
-
-#endif /* __fwcmd_opcodes_amap_h__ */
diff --git a/drivers/staging/benet/fwcmd_types_bmap.h b/drivers/staging/benet/fwcmd_types_bmap.h
deleted file mode 100644
index 92217af..0000000
--- a/drivers/staging/benet/fwcmd_types_bmap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __fwcmd_types_bmap_h__
-#define __fwcmd_types_bmap_h__
-
-/* MAC address format */
-struct MAC_ADDRESS_FORMAT {
- u16 SizeOfStructure;
- u8 MACAddress[6];
-} __packed;
-
-#endif /* __fwcmd_types_bmap_h__ */
diff --git a/drivers/staging/benet/host_struct.h b/drivers/staging/benet/host_struct.h
deleted file mode 100644
index 3de6722..0000000
--- a/drivers/staging/benet/host_struct.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __host_struct_amap_h__
-#define __host_struct_amap_h__
-#include "be_cm.h"
-#include "be_common.h"
-#include "descriptors.h"
-
-/* --- EQ_COMPLETION_MAJOR_CODE_ENUM --- */
-#define EQ_MAJOR_CODE_COMPLETION (0) /* Completion event on a */
- /* qcompletion ueue. */
-#define EQ_MAJOR_CODE_ETH (1) /* Affiliated Ethernet Event. */
-#define EQ_MAJOR_CODE_RESERVED (2) /* Reserved */
-#define EQ_MAJOR_CODE_RDMA (3) /* Affiliated RDMA Event. */
-#define EQ_MAJOR_CODE_ISCSI (4) /* Affiliated ISCSI Event */
-#define EQ_MAJOR_CODE_UNAFFILIATED (5) /* Unaffiliated Event */
-
-/* --- EQ_COMPLETION_MINOR_CODE_ENUM --- */
-#define EQ_MINOR_CODE_COMPLETION (0) /* Completion event on a */
- /* completion queue. */
-#define EQ_MINOR_CODE_OTHER (1) /* Other Event (TBD). */
-
-/* Queue Entry Definition for all 4 byte event queue types. */
-struct BE_EQ_ENTRY_AMAP {
- u8 Valid; /* DWORD 0 */
- u8 MajorCode[3]; /* DWORD 0 */
- u8 MinorCode[12]; /* DWORD 0 */
- u8 ResourceID[16]; /* DWORD 0 */
-} __packed;
-struct EQ_ENTRY_AMAP {
- u32 dw[1];
-};
-
-/*
- * --- ETH_EVENT_CODE ---
- * These codes are returned by the MPU when one of these events has occurred,
- * and the event is configured to report to an Event Queue when an event
- * is detected.
- */
-#define ETH_EQ_LINK_STATUS (0) /* Link status change event */
- /* detected. */
-#define ETH_EQ_WATERMARK (1) /* watermark event detected. */
-#define ETH_EQ_MAGIC_PKT (2) /* magic pkt event detected. */
-#define ETH_EQ_ACPI_PKT0 (3) /* ACPI interesting packet */
- /* detected. */
-#define ETH_EQ_ACPI_PKT1 (3) /* ACPI interesting packet */
- /* detected. */
-#define ETH_EQ_ACPI_PKT2 (3) /* ACPI interesting packet */
- /* detected. */
-#define ETH_EQ_ACPI_PKT3 (3) /* ACPI interesting packet */
- /* detected. */
-
-/*
- * --- ETH_TX_COMPL_STATUS_ENUM ---
- * Status codes contained in Ethernet TX completion descriptors.
- */
-#define ETH_COMP_VALID (0)
-#define ETH_COMP_ERROR (1)
-#define ETH_COMP_INVALID (15)
-
-/*
- * --- ETH_TX_COMPL_PORT_ENUM ---
- * Port indicator contained in Ethernet TX completion descriptors.
- */
-#define ETH_COMP_PORT0 (0)
-#define ETH_COMP_PORT1 (1)
-#define ETH_COMP_MGMT (2)
-
-/*
- * --- ETH_TX_COMPL_CT_ENUM ---
- * Completion type indicator contained in Ethernet TX completion descriptors.
- */
-#define ETH_COMP_ETH (0)
-
-/*
- * Work request block that the driver issues to the chip for
- * Ethernet transmissions. All control fields must be valid in each WRB for
- * a message. The controller, as specified by the flags, optionally writes
- * an entry to the Completion Ring and generate an event.
- */
-struct BE_ETH_WRB_AMAP {
- u8 frag_pa_hi[32]; /* DWORD 0 */
- u8 frag_pa_lo[32]; /* DWORD 1 */
- u8 complete; /* DWORD 2 */
- u8 event; /* DWORD 2 */
- u8 crc; /* DWORD 2 */
- u8 forward; /* DWORD 2 */
- u8 ipsec; /* DWORD 2 */
- u8 mgmt; /* DWORD 2 */
- u8 ipcs; /* DWORD 2 */
- u8 udpcs; /* DWORD 2 */
- u8 tcpcs; /* DWORD 2 */
- u8 lso; /* DWORD 2 */
- u8 last; /* DWORD 2 */
- u8 vlan; /* DWORD 2 */
- u8 dbg[3]; /* DWORD 2 */
- u8 hash_val[3]; /* DWORD 2 */
- u8 lso_mss[14]; /* DWORD 2 */
- u8 frag_len[16]; /* DWORD 3 */
- u8 vlan_tag[16]; /* DWORD 3 */
-} __packed;
-struct ETH_WRB_AMAP {
- u32 dw[4];
-};
-
-/* This is an Ethernet transmit completion descriptor */
-struct BE_ETH_TX_COMPL_AMAP {
- u8 user_bytes[16]; /* DWORD 0 */
- u8 nwh_bytes[8]; /* DWORD 0 */
- u8 lso; /* DWORD 0 */
- u8 rsvd0[7]; /* DWORD 0 */
- u8 wrb_index[16]; /* DWORD 1 */
- u8 ct[2]; /* DWORD 1 */
- u8 port[2]; /* DWORD 1 */
- u8 rsvd1[8]; /* DWORD 1 */
- u8 status[4]; /* DWORD 1 */
- u8 rsvd2[16]; /* DWORD 2 */
- u8 ringid[11]; /* DWORD 2 */
- u8 hash_val[4]; /* DWORD 2 */
- u8 valid; /* DWORD 2 */
- u8 rsvd3[32]; /* DWORD 3 */
-} __packed;
-struct ETH_TX_COMPL_AMAP {
- u32 dw[4];
-};
-
-/* Ethernet Receive Buffer descriptor */
-struct BE_ETH_RX_D_AMAP {
- u8 fragpa_hi[32]; /* DWORD 0 */
- u8 fragpa_lo[32]; /* DWORD 1 */
-} __packed;
-struct ETH_RX_D_AMAP {
- u32 dw[2];
-};
-
-/* This is an Ethernet Receive Completion Descriptor */
-struct BE_ETH_RX_COMPL_AMAP {
- u8 vlan_tag[16]; /* DWORD 0 */
- u8 pktsize[14]; /* DWORD 0 */
- u8 port; /* DWORD 0 */
- u8 rsvd0; /* DWORD 0 */
- u8 err; /* DWORD 1 */
- u8 rsshp; /* DWORD 1 */
- u8 ipf; /* DWORD 1 */
- u8 tcpf; /* DWORD 1 */
- u8 udpf; /* DWORD 1 */
- u8 ipcksm; /* DWORD 1 */
- u8 tcpcksm; /* DWORD 1 */
- u8 udpcksm; /* DWORD 1 */
- u8 macdst[6]; /* DWORD 1 */
- u8 vtp; /* DWORD 1 */
- u8 vtm; /* DWORD 1 */
- u8 fragndx[10]; /* DWORD 1 */
- u8 ct[2]; /* DWORD 1 */
- u8 ipsec; /* DWORD 1 */
- u8 numfrags[3]; /* DWORD 1 */
- u8 rsvd1[31]; /* DWORD 2 */
- u8 valid; /* DWORD 2 */
- u8 rsshash[32]; /* DWORD 3 */
-} __packed;
-struct ETH_RX_COMPL_AMAP {
- u32 dw[4];
-};
-
-#endif /* __host_struct_amap_h__ */
diff --git a/drivers/staging/benet/hwlib.h b/drivers/staging/benet/hwlib.h
deleted file mode 100644
index afedf4d..0000000
--- a/drivers/staging/benet/hwlib.h
+++ /dev/null
@@ -1,830 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#ifndef __hwlib_h__
-#define __hwlib_h__
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include "regmap.h" /* srcgen array map output */
-
-#include "asyncmesg.h"
-#include "fwcmd_opcodes.h"
-#include "post_codes.h"
-#include "fwcmd_mcc.h"
-
-#include "fwcmd_types_bmap.h"
-#include "fwcmd_common_bmap.h"
-#include "fwcmd_eth_bmap.h"
-#include "bestatus.h"
-/*
- *
- * Macros for reading/writing a protection domain or CSR registers
- * in BladeEngine.
- */
-#define PD_READ(fo, field) ioread32((fo)->db_va + \
- offsetof(struct BE_PROTECTION_DOMAIN_DBMAP_AMAP, field)/8)
-
-#define PD_WRITE(fo, field, val) iowrite32(val, (fo)->db_va + \
- offsetof(struct BE_PROTECTION_DOMAIN_DBMAP_AMAP, field)/8)
-
-#define CSR_READ(fo, field) ioread32((fo)->csr_va + \
- offsetof(struct BE_BLADE_ENGINE_CSRMAP_AMAP, field)/8)
-
-#define CSR_WRITE(fo, field, val) iowrite32(val, (fo)->csr_va + \
- offsetof(struct BE_BLADE_ENGINE_CSRMAP_AMAP, field)/8)
-
-#define PCICFG0_READ(fo, field) ioread32((fo)->pci_va + \
- offsetof(struct BE_PCICFG0_CSRMAP_AMAP, field)/8)
-
-#define PCICFG0_WRITE(fo, field, val) iowrite32(val, (fo)->pci_va + \
- offsetof(struct BE_PCICFG0_CSRMAP_AMAP, field)/8)
-
-#define PCICFG1_READ(fo, field) ioread32((fo)->pci_va + \
- offsetof(struct BE_PCICFG1_CSRMAP_AMAP, field)/8)
-
-#define PCICFG1_WRITE(fo, field, val) iowrite32(val, (fo)->pci_va + \
- offsetof(struct BE_PCICFG1_CSRMAP_AMAP, field)/8)
-
-#ifdef BE_DEBUG
-#define ASSERT(c) BUG_ON(!(c));
-#else
-#define ASSERT(c)
-#endif
-
-/* debug levels */
-enum BE_DEBUG_LEVELS {
- DL_ALWAYS = 0, /* cannot be masked */
- DL_ERR = 0x1, /* errors that should never happen */
- DL_WARN = 0x2, /* something questionable.
- recoverable errors */
- DL_NOTE = 0x4, /* infrequent, important debug info */
- DL_INFO = 0x8, /* debug information */
- DL_VERBOSE = 0x10, /* detailed info, such as buffer traces */
- BE_DL_MIN_VALUE = 0x1, /* this is the min value used */
- BE_DL_MAX_VALUE = 0x80 /* this is the higheset value used */
-} ;
-
-extern unsigned int trace_level;
-
-#define TRACE(lm, fmt, args...) { \
- if (trace_level & lm) { \
- printk(KERN_NOTICE "BE: %s:%d \n" fmt, \
- __FILE__ , __LINE__ , ## args); \
- } \
- }
-
-static inline unsigned int be_trace_set_level(unsigned int level)
-{
- unsigned int old_level = trace_level;
- trace_level = level;
- return old_level;
-}
-
-#define be_trace_get_level() trace_level
-/*
- * Returns number of pages spanned by the size of data
- * starting at the given address.
- */
-#define PAGES_SPANNED(_address, _size) \
- ((u32)((((size_t)(_address) & (PAGE_SIZE - 1)) + \
- (_size) + (PAGE_SIZE - 1)) >> PAGE_SHIFT))
-/* Byte offset into the page corresponding to given address */
-#define OFFSET_IN_PAGE(_addr_) ((size_t)(_addr_) & (PAGE_SIZE-1))
-
-/*
- * circular subtract.
- * Returns a - b assuming a circular number system, where a and b are
- * in range (0, maxValue-1). If a==b, zero is returned so the
- * highest value possible with this subtraction is maxValue-1.
- */
-static inline u32 be_subc(u32 a, u32 b, u32 max)
-{
- ASSERT(a <= max && b <= max);
- ASSERT(max > 0);
- return a >= b ? (a - b) : (max - b + a);
-}
-
-static inline u32 be_addc(u32 a, u32 b, u32 max)
-{
- ASSERT(a < max);
- ASSERT(max > 0);
- return (max - a > b) ? (a + b) : (b + a - max);
-}
-
-/* descriptor for a physically contiguous memory used for ring */
-struct ring_desc {
- u32 length; /* length in bytes */
- void *va; /* virtual address */
- u64 pa; /* bus address */
-} ;
-
-/*
- * This structure stores information about a ring shared between hardware
- * and software. Each ring is allocated by the driver in the uncached
- * extension and mapped into BladeEngine's unified table.
- */
-struct mp_ring {
- u32 pages; /* queue size in pages */
- u32 id; /* queue id assigned by beklib */
- u32 num; /* number of elements in queue */
- u32 cidx; /* consumer index */
- u32 pidx; /* producer index -- not used by most rings */
- u32 itemSize; /* size in bytes of one object */
-
- void *va; /* The virtual address of the ring.
- This should be last to allow 32 & 64
- bit debugger extensions to work. */
-} ;
-
-/*----------- amap bit filed get / set macros and functions -----*/
-/*
- * Structures defined in the map header files (under fw/amap/) with names
- * in the format BE_<name>_AMAP are pseudo structures with members
- * of type u8. These structures are templates that are used in
- * conjuntion with the structures with names in the format
- * <name>_AMAP to calculate the bit masks and bit offsets to get or set
- * bit fields in structures. The structures <name>_AMAP are arrays
- * of 32 bits words and have the correct size. The following macros
- * provide convenient ways to get and set the various members
- * in the structures without using strucctures with bit fields.
- * Always use the macros AMAP_GET_BITS_PTR and AMAP_SET_BITS_PTR
- * macros to extract and set various members.
- */
-
-/*
- * Returns the a bit mask for the register that is NOT shifted into location.
- * That means return values always look like: 0x1, 0xFF, 0x7FF, etc...
- */
-static inline u32 amap_mask(u32 bit_size)
-{
- return bit_size == 32 ? 0xFFFFFFFF : (1 << bit_size) - 1;
-}
-
-#define AMAP_BIT_MASK(_struct_, field) \
- amap_mask(AMAP_BIT_SIZE(_struct_, field))
-
-/*
- * non-optimized set bits function. First clears the bits and then assigns them.
- * This does not require knowledge of the particular DWORD you are setting.
- * e.g. AMAP_SET_BITS_PTR (struct, field1, &contextMemory, 123);
- */
-static inline void
-amap_set(void *ptr, u32 dw_offset, u32 mask, u32 offset, u32 value)
-{
- u32 *dw = (u32 *)ptr;
- *(dw + dw_offset) &= ~(mask << offset);
- *(dw + dw_offset) |= (mask & value) << offset;
-}
-
-#define AMAP_SET_BITS_PTR(_struct_, field, _structPtr_, val) \
- amap_set(_structPtr_, AMAP_WORD_OFFSET(_struct_, field),\
- AMAP_BIT_MASK(_struct_, field), \
- AMAP_BIT_OFFSET(_struct_, field), val)
-/*
- * Non-optimized routine that gets the bits without knowing the correct DWORD.
- * e.g. fieldValue = AMAP_GET_BITS_PTR (struct, field1, &contextMemory);
- */
-static inline u32
-amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
-{
- u32 *dw = (u32 *)ptr;
- return mask & (*(dw + dw_offset) >> offset);
-}
-#define AMAP_GET_BITS_PTR(_struct_, field, _structPtr_) \
- amap_get(_structPtr_, AMAP_WORD_OFFSET(_struct_, field), \
- AMAP_BIT_MASK(_struct_, field), \
- AMAP_BIT_OFFSET(_struct_, field))
-
-/* Returns 0-31 representing bit offset within a DWORD of a bitfield. */
-#define AMAP_BIT_OFFSET(_struct_, field) \
- (offsetof(struct BE_ ## _struct_ ## _AMAP, field) % 32)
-
-/* Returns 0-n representing DWORD offset of bitfield within the structure. */
-#define AMAP_WORD_OFFSET(_struct_, field) \
- (offsetof(struct BE_ ## _struct_ ## _AMAP, field)/32)
-
-/* Returns size of bitfield in bits. */
-#define AMAP_BIT_SIZE(_struct_, field) \
- sizeof(((struct BE_ ## _struct_ ## _AMAP*)0)->field)
-
-struct be_mcc_wrb_response_copy {
- u16 length; /* bytes in response */
- u16 fwcmd_offset; /* offset within the wrb of the response */
- void *va; /* user's va to copy response into */
-
-} ;
-typedef void (*mcc_wrb_cqe_callback) (void *context, int status,
- struct MCC_WRB_AMAP *optional_wrb);
-struct be_mcc_wrb_context {
-
- mcc_wrb_cqe_callback internal_cb; /* Function to call on
- completion */
- void *internal_cb_context; /* Parameter to pass
- to completion function */
-
- mcc_wrb_cqe_callback cb; /* Function to call on completion */
- void *cb_context; /* Parameter to pass to completion function */
-
- int *users_final_status; /* pointer to a local
- variable for synchronous
- commands */
- struct MCC_WRB_AMAP *wrb; /* pointer to original wrb for embedded
- commands only */
- struct list_head next; /* links context structs together in
- free list */
-
- struct be_mcc_wrb_response_copy copy; /* Optional parameters to copy
- embedded response to user's va */
-
-#if defined(BE_DEBUG)
- u16 subsystem, opcode; /* Track this FWCMD for debug builds. */
- struct MCC_WRB_AMAP *ring_wrb;
- u32 consumed_count;
-#endif
-} ;
-
-/*
- Represents a function object for network or storage. This
- is used to manage per-function resources like MCC CQs, etc.
-*/
-struct be_function_object {
-
- u32 magic; /*!< magic for detecting memory corruption. */
-
- /* PCI BAR mapped addresses */
- u8 __iomem *csr_va; /* CSR */
- u8 __iomem *db_va; /* Door Bell */
- u8 __iomem *pci_va; /* PCI config space */
- u32 emulate; /* if set, MPU is not available.
- Emulate everything. */
- u32 pend_queue_driving; /* if set, drive the queued WRBs
- after releasing the WRB lock */
-
- spinlock_t post_lock; /* lock for verifying one thread posting wrbs */
- spinlock_t cq_lock; /* lock for verifying one thread
- processing cq */
- spinlock_t mcc_context_lock; /* lock for protecting mcc
- context free list */
- unsigned long post_irq;
- unsigned long cq_irq;
-
- u32 type;
- u32 pci_function_number;
-
- struct be_mcc_object *mcc; /* mcc rings. */
-
- struct {
- struct MCC_MAILBOX_AMAP *va; /* VA to the mailbox */
- u64 pa; /* PA to the mailbox */
- u32 length; /* byte length of mailbox */
-
- /* One default context struct used for posting at
- * least one MCC_WRB
- */
- struct be_mcc_wrb_context default_context;
- bool default_context_allocated;
- } mailbox;
-
- struct {
-
- /* Wake on lans configured. */
- u32 wol_bitmask; /* bits 0,1,2,3 are set if
- corresponding index is enabled */
- } config;
-
-
- struct BE_FIRMWARE_CONFIG fw_config;
-} ;
-
-/*
- Represents an Event Queue
-*/
-struct be_eq_object {
- u32 magic;
- atomic_t ref_count;
-
- struct be_function_object *parent_function;
-
- struct list_head eq_list;
- struct list_head cq_list_head;
-
- u32 eq_id;
- void *cb_context;
-
-} ;
-
-/*
- Manages a completion queue
-*/
-struct be_cq_object {
- u32 magic;
- atomic_t ref_count;
-
- struct be_function_object *parent_function;
- struct be_eq_object *eq_object;
-
- struct list_head cq_list;
- struct list_head cqlist_for_eq;
-
- void *va;
- u32 num_entries;
-
- void *cb_context;
-
- u32 cq_id;
-
-} ;
-
-/*
- Manages an ethernet send queue
-*/
-struct be_ethsq_object {
- u32 magic;
-
- struct list_head list;
-
- struct be_function_object *parent_function;
- struct be_cq_object *cq_object;
- u32 bid;
-
-} ;
-
-/*
-@brief
- Manages an ethernet receive queue
-*/
-struct be_ethrq_object {
- u32 magic;
- struct list_head list;
- struct be_function_object *parent_function;
- u32 rid;
- struct be_cq_object *cq_object;
- struct be_cq_object *rss_cq_object[4];
-
-} ;
-
-/*
- Manages an MCC
-*/
-typedef void (*mcc_async_event_callback) (void *context, u32 event_code,
- void *event);
-struct be_mcc_object {
- u32 magic;
-
- struct be_function_object *parent_function;
- struct list_head mcc_list;
-
- struct be_cq_object *cq_object;
-
- /* Async event callback for MCC CQ. */
- mcc_async_event_callback async_cb;
- void *async_context;
-
- struct {
- struct be_mcc_wrb_context *base;
- u32 num;
- struct list_head list_head;
- } wrb_context;
-
- struct {
- struct ring_desc *rd;
- struct mp_ring ring;
- } sq;
-
- struct {
- struct mp_ring ring;
- } cq;
-
- u32 processing; /* flag indicating that one thread
- is processing CQ */
- u32 rearm; /* doorbell rearm setting to make
- sure the active processing thread */
- /* rearms the CQ if any of the threads requested it. */
-
- struct list_head backlog;
- u32 backlog_length;
- u32 driving_backlog;
- u32 consumed_index;
-
-} ;
-
-
-/* Queue context header -- the required software information for
- * queueing a WRB.
- */
-struct be_queue_driver_context {
- mcc_wrb_cqe_callback internal_cb; /* Function to call on
- completion */
- void *internal_cb_context; /* Parameter to pass
- to completion function */
-
- mcc_wrb_cqe_callback cb; /* Function to call on completion */
- void *cb_context; /* Parameter to pass to completion function */
-
- struct be_mcc_wrb_response_copy copy; /* Optional parameters to copy
- embedded response to user's va */
- void *optional_fwcmd_va;
- struct list_head list;
- u32 bytes;
-} ;
-
-/*
- * Common MCC WRB header that all commands require.
- */
-struct be_mcc_wrb_header {
- u8 rsvd[offsetof(struct BE_MCC_WRB_AMAP, payload)/8];
-} ;
-
-/*
- * All non embedded commands supported by hwlib functions only allow
- * 1 SGE. This queue context handles them all.
- */
-struct be_nonembedded_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct MCC_SGE_AMAP sge[1];
-} ;
-
-/*
- * ------------------------------------------------------------------------
- * This section contains the specific queue struct for each command.
- * The user could always provide a be_generic_q_ctxt but this is a
- * rather large struct. By using the specific struct, memory consumption
- * can be reduced.
- * ------------------------------------------------------------------------
- */
-
-struct be_link_status_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_COMMON_NTWK_LINK_STATUS_QUERY fwcmd;
-} ;
-
-struct be_multicast_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_COMMON_NTWK_MULTICAST_SET fwcmd;
-} ;
-
-
-struct be_vlan_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_COMMON_NTWK_VLAN_CONFIG fwcmd;
-} ;
-
-struct be_promiscuous_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_ETH_PROMISCUOUS fwcmd;
-} ;
-
-struct be_force_failover_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_COMMON_FORCE_FAILOVER fwcmd;
-} ;
-
-
-struct be_rxf_filter_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_COMMON_NTWK_RX_FILTER fwcmd;
-} ;
-
-struct be_eq_modify_delay_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct FWCMD_COMMON_MODIFY_EQ_DELAY fwcmd;
-} ;
-
-/*
- * The generic context is the largest size that would be required.
- * It is the software context plus an entire WRB.
- */
-struct be_generic_q_ctxt {
- struct be_queue_driver_context context;
- struct be_mcc_wrb_header wrb_header;
- struct MCC_WRB_PAYLOAD_AMAP payload;
-} ;
-
-/*
- * Types for the BE_QUEUE_CONTEXT object.
- */
-#define BE_QUEUE_INVALID (0)
-#define BE_QUEUE_LINK_STATUS (0xA006)
-#define BE_QUEUE_ETH_STATS (0xA007)
-#define BE_QUEUE_TPM_STATS (0xA008)
-#define BE_QUEUE_TCP_STATS (0xA009)
-#define BE_QUEUE_MULTICAST (0xA00A)
-#define BE_QUEUE_VLAN (0xA00B)
-#define BE_QUEUE_RSS (0xA00C)
-#define BE_QUEUE_FORCE_FAILOVER (0xA00D)
-#define BE_QUEUE_PROMISCUOUS (0xA00E)
-#define BE_QUEUE_WAKE_ON_LAN (0xA00F)
-#define BE_QUEUE_NOP (0xA010)
-
-/* --- BE_FUNCTION_ENUM --- */
-#define BE_FUNCTION_TYPE_ISCSI (0)
-#define BE_FUNCTION_TYPE_NETWORK (1)
-#define BE_FUNCTION_TYPE_ARM (2)
-
-/* --- BE_ETH_TX_RING_TYPE_ENUM --- */
-#define BE_ETH_TX_RING_TYPE_FORWARDING (1) /* Ether ring for forwarding */
-#define BE_ETH_TX_RING_TYPE_STANDARD (2) /* Ether ring for sending */
- /* network packets. */
-#define BE_ETH_TX_RING_TYPE_BOUND (3) /* Ethernet ring for sending */
- /* network packets, bound */
- /* to a physical port. */
-/*
- * ----------------------------------------------------------------------
- * API MACROS
- * ----------------------------------------------------------------------
- */
-#define BE_FWCMD_NAME(_short_name_) struct FWCMD_##_short_name_
-#define BE_OPCODE_NAME(_short_name_) OPCODE_##_short_name_
-#define BE_SUBSYSTEM_NAME(_short_name_) SUBSYSTEM_##_short_name_
-
-
-#define BE_PREPARE_EMBEDDED_FWCMD(_pfob_, _wrb_, _short_name_) \
- ((BE_FWCMD_NAME(_short_name_) *) \
- be_function_prepare_embedded_fwcmd(_pfob_, _wrb_, \
- sizeof(BE_FWCMD_NAME(_short_name_)), \
- FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.request), \
- FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.response), \
- BE_OPCODE_NAME(_short_name_), \
- BE_SUBSYSTEM_NAME(_short_name_)));
-
-#define BE_PREPARE_NONEMBEDDED_FWCMD(_pfob_, _wrb_, _iva_, _ipa_, _short_name_)\
- ((BE_FWCMD_NAME(_short_name_) *) \
- be_function_prepare_nonembedded_fwcmd(_pfob_, _wrb_, (_iva_), (_ipa_), \
- sizeof(BE_FWCMD_NAME(_short_name_)), \
- FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.request), \
- FIELD_SIZEOF(BE_FWCMD_NAME(_short_name_), params.response), \
- BE_OPCODE_NAME(_short_name_), \
- BE_SUBSYSTEM_NAME(_short_name_)));
-
-int be_function_object_create(u8 __iomem *csr_va, u8 __iomem *db_va,
- u8 __iomem *pci_va, u32 function_type, struct ring_desc *mailbox_rd,
- struct be_function_object *pfob);
-
-int be_function_object_destroy(struct be_function_object *pfob);
-int be_function_cleanup(struct be_function_object *pfob);
-
-
-int be_function_get_fw_version(struct be_function_object *pfob,
- struct FWCMD_COMMON_GET_FW_VERSION_RESPONSE_PAYLOAD *fw_version,
- mcc_wrb_cqe_callback cb, void *cb_context);
-
-
-int be_eq_modify_delay(struct be_function_object *pfob,
- u32 num_eq, struct be_eq_object **eq_array,
- u32 *eq_delay_array, mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_eq_modify_delay_q_ctxt *q_ctxt);
-
-
-
-int be_eq_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 eqe_size, u32 num_entries,
- u32 watermark, u32 timer_delay, struct be_eq_object *eq_object);
-
-int be_eq_destroy(struct be_eq_object *eq);
-
-int be_cq_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 length,
- bool solicited_eventable, bool no_delay,
- u32 wm_thresh, struct be_eq_object *eq_object,
- struct be_cq_object *cq_object);
-
-int be_cq_destroy(struct be_cq_object *cq);
-
-int be_mcc_ring_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 length,
- struct be_mcc_wrb_context *context_array,
- u32 num_context_entries,
- struct be_cq_object *cq, struct be_mcc_object *mcc);
-int be_mcc_ring_destroy(struct be_mcc_object *mcc_object);
-
-int be_mcc_process_cq(struct be_mcc_object *mcc_object, bool rearm);
-
-int be_mcc_add_async_event_callback(struct be_mcc_object *mcc_object,
- mcc_async_event_callback cb, void *cb_context);
-
-int be_pci_soft_reset(struct be_function_object *pfob);
-
-
-int be_drive_POST(struct be_function_object *pfob);
-
-
-int be_eth_sq_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 length_in_bytes,
- u32 type, u32 ulp, struct be_cq_object *cq_object,
- struct be_ethsq_object *eth_sq);
-
-struct be_eth_sq_parameters {
- u32 port;
- u32 rsvd0[2];
-} ;
-
-int be_eth_sq_create_ex(struct be_function_object *pfob,
- struct ring_desc *rd, u32 length_in_bytes,
- u32 type, u32 ulp, struct be_cq_object *cq_object,
- struct be_eth_sq_parameters *ex_parameters,
- struct be_ethsq_object *eth_sq);
-int be_eth_sq_destroy(struct be_ethsq_object *eth_sq);
-
-int be_eth_set_flow_control(struct be_function_object *pfob,
- bool txfc_enable, bool rxfc_enable);
-
-int be_eth_get_flow_control(struct be_function_object *pfob,
- bool *txfc_enable, bool *rxfc_enable);
-int be_eth_set_qos(struct be_function_object *pfob, u32 max_bps, u32 max_pps);
-
-int be_eth_get_qos(struct be_function_object *pfob, u32 *max_bps, u32 *max_pps);
-
-int be_eth_set_frame_size(struct be_function_object *pfob,
- u32 *tx_frame_size, u32 *rx_frame_size);
-
-int be_eth_rq_create(struct be_function_object *pfob,
- struct ring_desc *rd, struct be_cq_object *cq_object,
- struct be_cq_object *bcmc_cq_object,
- struct be_ethrq_object *eth_rq);
-
-int be_eth_rq_destroy(struct be_ethrq_object *eth_rq);
-
-int be_eth_rq_destroy_options(struct be_ethrq_object *eth_rq, bool flush,
- mcc_wrb_cqe_callback cb, void *cb_context);
-int be_eth_rq_set_frag_size(struct be_function_object *pfob,
- u32 new_frag_size_bytes, u32 *actual_frag_size_bytes);
-int be_eth_rq_get_frag_size(struct be_function_object *pfob,
- u32 *frag_size_bytes);
-
-void *be_function_prepare_embedded_fwcmd(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb,
- u32 payload_length, u32 request_length,
- u32 response_length, u32 opcode, u32 subsystem);
-void *be_function_prepare_nonembedded_fwcmd(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb, void *fwcmd_header_va, u64 fwcmd_header_pa,
- u32 payload_length, u32 request_length, u32 response_length,
- u32 opcode, u32 subsystem);
-
-
-struct MCC_WRB_AMAP *
-be_function_peek_mcc_wrb(struct be_function_object *pfob);
-
-int be_rxf_mac_address_read_write(struct be_function_object *pfob,
- bool port1, bool mac1, bool mgmt,
- bool write, bool permanent, u8 *mac_address,
- mcc_wrb_cqe_callback cb,
- void *cb_context);
-
-int be_rxf_multicast_config(struct be_function_object *pfob,
- bool promiscuous, u32 num, u8 *mac_table,
- mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_multicast_q_ctxt *q_ctxt);
-
-int be_rxf_vlan_config(struct be_function_object *pfob,
- bool promiscuous, u32 num, u16 *vlan_tag_array,
- mcc_wrb_cqe_callback cb, void *cb_context,
- struct be_vlan_q_ctxt *q_ctxt);
-
-
-int be_rxf_link_status(struct be_function_object *pfob,
- struct BE_LINK_STATUS *link_status,
- mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_link_status_q_ctxt *q_ctxt);
-
-
-int be_rxf_query_eth_statistics(struct be_function_object *pfob,
- struct FWCMD_ETH_GET_STATISTICS *va_for_fwcmd,
- u64 pa_for_fwcmd, mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_nonembedded_q_ctxt *q_ctxt);
-
-int be_rxf_promiscuous(struct be_function_object *pfob,
- bool enable_port0, bool enable_port1,
- mcc_wrb_cqe_callback cb, void *cb_context,
- struct be_promiscuous_q_ctxt *q_ctxt);
-
-
-int be_rxf_filter_config(struct be_function_object *pfob,
- struct NTWK_RX_FILTER_SETTINGS *settings,
- mcc_wrb_cqe_callback cb,
- void *cb_context,
- struct be_rxf_filter_q_ctxt *q_ctxt);
-
-/*
- * ------------------------------------------------------
- * internal functions used by hwlib
- * ------------------------------------------------------
- */
-
-
-int be_function_ring_destroy(struct be_function_object *pfob,
- u32 id, u32 ring_type, mcc_wrb_cqe_callback cb,
- void *cb_context,
- mcc_wrb_cqe_callback internal_cb,
- void *internal_callback_context);
-
-int be_function_post_mcc_wrb(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb,
- struct be_generic_q_ctxt *q_ctxt,
- mcc_wrb_cqe_callback cb, void *cb_context,
- mcc_wrb_cqe_callback internal_cb,
- void *internal_cb_context, void *optional_fwcmd_va,
- struct be_mcc_wrb_response_copy *response_copy);
-
-int be_function_queue_mcc_wrb(struct be_function_object *pfob,
- struct be_generic_q_ctxt *q_ctxt);
-
-/*
- * ------------------------------------------------------
- * MCC QUEUE
- * ------------------------------------------------------
- */
-
-int be_mpu_init_mailbox(struct be_function_object *pfob, struct ring_desc *rd);
-
-
-struct MCC_WRB_AMAP *
-_be_mpu_peek_ring_wrb(struct be_mcc_object *mcc, bool driving_queue);
-
-struct be_mcc_wrb_context *
-_be_mcc_allocate_wrb_context(struct be_function_object *pfob);
-
-void _be_mcc_free_wrb_context(struct be_function_object *pfob,
- struct be_mcc_wrb_context *context);
-
-int _be_mpu_post_wrb_mailbox(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context);
-
-int _be_mpu_post_wrb_ring(struct be_mcc_object *mcc,
- struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context);
-
-void be_drive_mcc_wrb_queue(struct be_mcc_object *mcc);
-
-
-/*
- * ------------------------------------------------------
- * Ring Sizes
- * ------------------------------------------------------
- */
-static inline u32 be_ring_encoding_to_length(u32 encoding, u32 object_size)
-{
-
- ASSERT(encoding != 1); /* 1 is rsvd */
- ASSERT(encoding < 16);
- ASSERT(object_size > 0);
-
- if (encoding == 0) /* 32k deep */
- encoding = 16;
-
- return (1 << (encoding - 1)) * object_size;
-}
-
-static inline
-u32 be_ring_length_to_encoding(u32 length_in_bytes, u32 object_size)
-{
-
- u32 count, encoding;
-
- ASSERT(object_size > 0);
- ASSERT(length_in_bytes % object_size == 0);
-
- count = length_in_bytes / object_size;
-
- ASSERT(count > 1);
- ASSERT(count <= 32 * 1024);
- ASSERT(length_in_bytes <= 8 * PAGE_SIZE); /* max ring size in UT */
-
- encoding = __ilog2_u32(count) + 1;
-
- if (encoding == 16)
- encoding = 0; /* 32k deep */
-
- return encoding;
-}
-
-void be_rd_to_pa_list(struct ring_desc *rd, struct PHYS_ADDR *pa_list,
- u32 max_num);
-#endif /* __hwlib_h__ */
diff --git a/drivers/staging/benet/mpu.c b/drivers/staging/benet/mpu.c
deleted file mode 100644
index 269cc11..0000000
--- a/drivers/staging/benet/mpu.c
+++ /dev/null
@@ -1,1364 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-#include <linux/delay.h>
-#include "hwlib.h"
-#include "bestatus.h"
-
-static
-inline void mp_ring_create(struct mp_ring *ring, u32 num, u32 size, void *va)
-{
- ASSERT(ring);
- memset(ring, 0, sizeof(struct mp_ring));
- ring->num = num;
- ring->pages = DIV_ROUND_UP(num * size, PAGE_SIZE);
- ring->itemSize = size;
- ring->va = va;
-}
-
-/*
- * -----------------------------------------------------------------------
- * Interface for 2 index rings. i.e. consumer/producer rings
- * --------------------------------------------------------------------------
- */
-
-/* Returns number items pending on ring. */
-static inline u32 mp_ring_num_pending(struct mp_ring *ring)
-{
- ASSERT(ring);
- if (ring->num == 0)
- return 0;
- return be_subc(ring->pidx, ring->cidx, ring->num);
-}
-
-/* Returns number items free on ring. */
-static inline u32 mp_ring_num_empty(struct mp_ring *ring)
-{
- ASSERT(ring);
- return ring->num - 1 - mp_ring_num_pending(ring);
-}
-
-/* Consume 1 item */
-static inline void mp_ring_consume(struct mp_ring *ring)
-{
- ASSERT(ring);
- ASSERT(ring->pidx != ring->cidx);
-
- ring->cidx = be_addc(ring->cidx, 1, ring->num);
-}
-
-/* Produce 1 item */
-static inline void mp_ring_produce(struct mp_ring *ring)
-{
- ASSERT(ring);
- ring->pidx = be_addc(ring->pidx, 1, ring->num);
-}
-
-/* Consume count items */
-static inline void mp_ring_consume_multiple(struct mp_ring *ring, u32 count)
-{
- ASSERT(ring);
- ASSERT(mp_ring_num_pending(ring) >= count);
- ring->cidx = be_addc(ring->cidx, count, ring->num);
-}
-
-static inline void *mp_ring_item(struct mp_ring *ring, u32 index)
-{
- ASSERT(ring);
- ASSERT(index < ring->num);
- ASSERT(ring->itemSize > 0);
- return (u8 *) ring->va + index * ring->itemSize;
-}
-
-/* Ptr to produce item */
-static inline void *mp_ring_producer_ptr(struct mp_ring *ring)
-{
- ASSERT(ring);
- return mp_ring_item(ring, ring->pidx);
-}
-
-/*
- * Returns a pointer to the current location in the ring.
- * This is used for rings with 1 index.
- */
-static inline void *mp_ring_current(struct mp_ring *ring)
-{
- ASSERT(ring);
- ASSERT(ring->pidx == 0); /* not used */
-
- return mp_ring_item(ring, ring->cidx);
-}
-
-/*
- * Increment index for rings with only 1 index.
- * This is used for rings with 1 index.
- */
-static inline void *mp_ring_next(struct mp_ring *ring)
-{
- ASSERT(ring);
- ASSERT(ring->num > 0);
- ASSERT(ring->pidx == 0); /* not used */
-
- ring->cidx = be_addc(ring->cidx, 1, ring->num);
- return mp_ring_current(ring);
-}
-
-/*
- This routine waits for a previously posted mailbox WRB to be completed.
- Specifically it waits for the mailbox to say that it's ready to accept
- more data by setting the LSB of the mailbox pd register to 1.
-
- pcontroller - The function object to post this data to
-
- IRQL < DISPATCH_LEVEL
-*/
-static void be_mcc_mailbox_wait(struct be_function_object *pfob)
-{
- struct MPU_MAILBOX_DB_AMAP mailbox_db;
- u32 i = 0;
- u32 ready;
-
- if (pfob->emulate) {
- /* No waiting for mailbox in emulated mode. */
- return;
- }
-
- mailbox_db.dw[0] = PD_READ(pfob, mcc_bootstrap_db);
- ready = AMAP_GET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db);
-
- while (ready == false) {
- if ((++i & 0x3FFFF) == 0) {
- TRACE(DL_WARN, "Waiting for mailbox ready - %dk polls",
- i / 1000);
- }
- udelay(1);
- mailbox_db.dw[0] = PD_READ(pfob, mcc_bootstrap_db);
- ready = AMAP_GET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db);
- }
-}
-
-/*
- This routine tells the MCC mailbox that there is data to processed
- in the mailbox. It does this by setting the physical address for the
- mailbox location and clearing the LSB. This routine returns immediately
- and does not wait for the WRB to be processed.
-
- pcontroller - The function object to post this data to
-
- IRQL < DISPATCH_LEVEL
-
-*/
-static void be_mcc_mailbox_notify(struct be_function_object *pfob)
-{
- struct MPU_MAILBOX_DB_AMAP mailbox_db;
- u32 pa;
-
- ASSERT(pfob->mailbox.pa);
- ASSERT(pfob->mailbox.va);
-
- /* If emulated, do not ring the mailbox */
- if (pfob->emulate) {
- TRACE(DL_WARN, "MPU disabled. Skipping mailbox notify.");
- return;
- }
-
- /* form the higher bits in the address */
- mailbox_db.dw[0] = 0; /* init */
- AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, hi, &mailbox_db, 1);
- AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db, 0);
-
- /* bits 34 to 63 */
- pa = (u32) (pfob->mailbox.pa >> 34);
- AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, address, &mailbox_db, pa);
-
- /* Wait for the MPU to be ready */
- be_mcc_mailbox_wait(pfob);
-
- /* Ring doorbell 1st time */
- PD_WRITE(pfob, mcc_bootstrap_db, mailbox_db.dw[0]);
-
- /* Wait for 1st write to be acknowledged. */
- be_mcc_mailbox_wait(pfob);
-
- /* lower bits 30 bits from 4th bit (bits 4 to 33)*/
- pa = (u32) (pfob->mailbox.pa >> 4) & 0x3FFFFFFF;
-
- AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, hi, &mailbox_db, 0);
- AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, ready, &mailbox_db, 0);
- AMAP_SET_BITS_PTR(MPU_MAILBOX_DB, address, &mailbox_db, pa);
-
- /* Ring doorbell 2nd time */
- PD_WRITE(pfob, mcc_bootstrap_db, mailbox_db.dw[0]);
-}
-
-/*
- This routine tells the MCC mailbox that there is data to processed
- in the mailbox. It does this by setting the physical address for the
- mailbox location and clearing the LSB. This routine spins until the
- MPU writes a 1 into the LSB indicating that the data has been received
- and is ready to be processed.
-
- pcontroller - The function object to post this data to
-
- IRQL < DISPATCH_LEVEL
-*/
-static void
-be_mcc_mailbox_notify_and_wait(struct be_function_object *pfob)
-{
- /*
- * Notify it
- */
- be_mcc_mailbox_notify(pfob);
- /*
- * Now wait for completion of WRB
- */
- be_mcc_mailbox_wait(pfob);
-}
-
-void
-be_mcc_process_cqe(struct be_function_object *pfob,
- struct MCC_CQ_ENTRY_AMAP *cqe)
-{
- struct be_mcc_wrb_context *wrb_context = NULL;
- u32 offset, status;
- u8 *p;
-
- ASSERT(cqe);
- /*
- * A command completed. Commands complete out-of-order.
- * Determine which command completed from the TAG.
- */
- offset = offsetof(struct BE_MCC_CQ_ENTRY_AMAP, mcc_tag)/8;
- p = (u8 *) cqe + offset;
- wrb_context = (struct be_mcc_wrb_context *)(void *)(size_t)(*(u64 *)p);
- ASSERT(wrb_context);
-
- /*
- * Perform a response copy if requested.
- * Only copy data if the FWCMD is successful.
- */
- status = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, completion_status, cqe);
- if (status == MGMT_STATUS_SUCCESS && wrb_context->copy.length > 0) {
- ASSERT(wrb_context->wrb);
- ASSERT(wrb_context->copy.va);
- p = (u8 *)wrb_context->wrb +
- offsetof(struct BE_MCC_WRB_AMAP, payload)/8;
- memcpy(wrb_context->copy.va,
- (u8 *)p + wrb_context->copy.fwcmd_offset,
- wrb_context->copy.length);
- }
-
- if (status)
- status = BE_NOT_OK;
- /* internal callback */
- if (wrb_context->internal_cb) {
- wrb_context->internal_cb(wrb_context->internal_cb_context,
- status, wrb_context->wrb);
- }
-
- /* callback */
- if (wrb_context->cb) {
- wrb_context->cb(wrb_context->cb_context,
- status, wrb_context->wrb);
- }
- /* Free the context structure */
- _be_mcc_free_wrb_context(pfob, wrb_context);
-}
-
-void be_drive_mcc_wrb_queue(struct be_mcc_object *mcc)
-{
- struct be_function_object *pfob = NULL;
- int status = BE_PENDING;
- struct be_generic_q_ctxt *q_ctxt;
- struct MCC_WRB_AMAP *wrb;
- struct MCC_WRB_AMAP *queue_wrb;
- u32 length, payload_length, sge_count, embedded;
- unsigned long irql;
-
- BUILD_BUG_ON((sizeof(struct be_generic_q_ctxt) <
- sizeof(struct be_queue_driver_context) +
- sizeof(struct MCC_WRB_AMAP)));
- pfob = mcc->parent_function;
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- if (mcc->driving_backlog) {
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return;
- }
- /* Acquire the flag to limit 1 thread to redrive posts. */
- mcc->driving_backlog = 1;
-
- while (!list_empty(&mcc->backlog)) {
- wrb = _be_mpu_peek_ring_wrb(mcc, true); /* Driving the queue */
- if (!wrb)
- break; /* No space in the ring yet. */
- /* Get the next queued entry to process. */
- q_ctxt = list_first_entry(&mcc->backlog,
- struct be_generic_q_ctxt, context.list);
- list_del(&q_ctxt->context.list);
- pfob->mcc->backlog_length--;
- /*
- * Compute the required length of the WRB.
- * Since the queue element may be smaller than
- * the complete WRB, copy only the required number of bytes.
- */
- queue_wrb = (struct MCC_WRB_AMAP *) &q_ctxt->wrb_header;
- embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, queue_wrb);
- if (embedded) {
- payload_length = AMAP_GET_BITS_PTR(MCC_WRB,
- payload_length, queue_wrb);
- length = sizeof(struct be_mcc_wrb_header) +
- payload_length;
- } else {
- sge_count = AMAP_GET_BITS_PTR(MCC_WRB, sge_count,
- queue_wrb);
- ASSERT(sge_count == 1); /* only 1 frag. */
- length = sizeof(struct be_mcc_wrb_header) +
- sge_count * sizeof(struct MCC_SGE_AMAP);
- }
-
- /*
- * Truncate the length based on the size of the
- * queue element. Some elements that have output parameters
- * can be smaller than the payload_length field would
- * indicate. We really only need to copy the request
- * parameters, not the response.
- */
- length = min(length, (u32) (q_ctxt->context.bytes -
- offsetof(struct be_generic_q_ctxt, wrb_header)));
-
- /* Copy the queue element WRB into the ring. */
- memcpy(wrb, &q_ctxt->wrb_header, length);
-
- /* Post the wrb. This should not fail assuming we have
- * enough context structs. */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL,
- q_ctxt->context.cb, q_ctxt->context.cb_context,
- q_ctxt->context.internal_cb,
- q_ctxt->context.internal_cb_context,
- q_ctxt->context.optional_fwcmd_va,
- &q_ctxt->context.copy);
-
- if (status == BE_SUCCESS) {
- /*
- * Synchronous completion. Since it was queued,
- * we will invoke the callback.
- * To the user, this is an asynchronous request.
- */
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
-
- ASSERT(q_ctxt->context.cb);
-
- q_ctxt->context.cb(
- q_ctxt->context.cb_context,
- BE_SUCCESS, NULL);
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- } else if (status != BE_PENDING) {
- /*
- * Another resource failed. Should never happen
- * if we have sufficient MCC_WRB_CONTEXT structs.
- * Return to head of the queue.
- */
- TRACE(DL_WARN, "Failed to post a queued WRB. 0x%x",
- status);
- list_add(&q_ctxt->context.list, &mcc->backlog);
- pfob->mcc->backlog_length++;
- break;
- }
- }
-
- /* Free the flag to limit 1 thread to redrive posts. */
- mcc->driving_backlog = 0;
- spin_unlock_irqrestore(&pfob->post_lock, irql);
-}
-
-/* This function asserts that the WRB was consumed in order. */
-#ifdef BE_DEBUG
-u32 be_mcc_wrb_consumed_in_order(struct be_mcc_object *mcc,
- struct MCC_CQ_ENTRY_AMAP *cqe)
-{
- struct be_mcc_wrb_context *wrb_context = NULL;
- u32 wrb_index;
- u32 wrb_consumed_in_order;
- u32 offset;
- u8 *p;
-
- ASSERT(cqe);
- /*
- * A command completed. Commands complete out-of-order.
- * Determine which command completed from the TAG.
- */
- offset = offsetof(struct BE_MCC_CQ_ENTRY_AMAP, mcc_tag)/8;
- p = (u8 *) cqe + offset;
- wrb_context = (struct be_mcc_wrb_context *)(void *)(size_t)(*(u64 *)p);
-
- ASSERT(wrb_context);
-
- wrb_index = (u32) (((u64)(size_t)wrb_context->ring_wrb -
- (u64)(size_t)mcc->sq.ring.va) / sizeof(struct MCC_WRB_AMAP));
-
- ASSERT(wrb_index < mcc->sq.ring.num);
-
- wrb_consumed_in_order = (u32) (wrb_index == mcc->consumed_index);
- mcc->consumed_index = be_addc(mcc->consumed_index, 1, mcc->sq.ring.num);
- return wrb_consumed_in_order;
-}
-#endif
-
-int be_mcc_process_cq(struct be_mcc_object *mcc, bool rearm)
-{
- struct be_function_object *pfob = NULL;
- struct MCC_CQ_ENTRY_AMAP *cqe;
- struct CQ_DB_AMAP db;
- struct mp_ring *cq_ring = &mcc->cq.ring;
- struct mp_ring *mp_ring = &mcc->sq.ring;
- u32 num_processed = 0;
- u32 consumed = 0, valid, completed, cqe_consumed, async_event;
-
- pfob = mcc->parent_function;
-
- spin_lock_irqsave(&pfob->cq_lock, pfob->cq_irq);
-
- /*
- * Verify that only one thread is processing the CQ at once.
- * We cannot hold the lock while processing the CQ due to
- * the callbacks into the OS. Therefore, this flag is used
- * to control it. If any of the threads want to
- * rearm the CQ, we need to honor that.
- */
- if (mcc->processing != 0) {
- mcc->rearm = mcc->rearm || rearm;
- goto Error;
- } else {
- mcc->processing = 1; /* lock processing for this thread. */
- mcc->rearm = rearm; /* set our rearm setting */
- }
-
- spin_unlock_irqrestore(&pfob->cq_lock, pfob->cq_irq);
-
- cqe = mp_ring_current(cq_ring);
- valid = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe);
- while (valid) {
-
- if (num_processed >= 8) {
- /* coalesce doorbells, but free space in cq
- * ring while processing. */
- db.dw[0] = 0; /* clear */
- AMAP_SET_BITS_PTR(CQ_DB, qid, &db, cq_ring->id);
- AMAP_SET_BITS_PTR(CQ_DB, rearm, &db, false);
- AMAP_SET_BITS_PTR(CQ_DB, event, &db, false);
- AMAP_SET_BITS_PTR(CQ_DB, num_popped, &db,
- num_processed);
- num_processed = 0;
-
- PD_WRITE(pfob, cq_db, db.dw[0]);
- }
-
- async_event = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, async_event, cqe);
- if (async_event) {
- /* This is an asynchronous event. */
- struct ASYNC_EVENT_TRAILER_AMAP *async_trailer =
- (struct ASYNC_EVENT_TRAILER_AMAP *)
- ((u8 *) cqe + sizeof(struct MCC_CQ_ENTRY_AMAP) -
- sizeof(struct ASYNC_EVENT_TRAILER_AMAP));
- u32 event_code;
- async_event = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
- async_event, async_trailer);
- ASSERT(async_event == 1);
-
-
- valid = AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
- valid, async_trailer);
- ASSERT(valid == 1);
-
- /* Call the async event handler if it is installed. */
- if (mcc->async_cb) {
- event_code =
- AMAP_GET_BITS_PTR(ASYNC_EVENT_TRAILER,
- event_code, async_trailer);
- mcc->async_cb(mcc->async_context,
- (u32) event_code, (void *) cqe);
- }
-
- } else {
- /* This is a completion entry. */
-
- /* No vm forwarding in this driver. */
-
- cqe_consumed = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY,
- consumed, cqe);
- if (cqe_consumed) {
- /*
- * A command on the MCC ring was consumed.
- * Update the consumer index.
- * These occur in order.
- */
- ASSERT(be_mcc_wrb_consumed_in_order(mcc, cqe));
- consumed++;
- }
-
- completed = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY,
- completed, cqe);
- if (completed) {
- /* A command completed. Use tag to
- * determine which command. */
- be_mcc_process_cqe(pfob, cqe);
- }
- }
-
- /* Reset the CQE */
- AMAP_SET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe, false);
- num_processed++;
-
- /* Update our tracking for the CQ ring. */
- cqe = mp_ring_next(cq_ring);
- valid = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, valid, cqe);
- }
-
- TRACE(DL_INFO, "num_processed:0x%x, and consumed:0x%x",
- num_processed, consumed);
- /*
- * Grab the CQ lock to synchronize the "rearm" setting for
- * the doorbell, and for clearing the "processing" flag.
- */
- spin_lock_irqsave(&pfob->cq_lock, pfob->cq_irq);
-
- /*
- * Rearm the cq. This is done based on the global mcc->rearm
- * flag which combines the rearm parameter from the current
- * call to process_cq and any other threads
- * that tried to process the CQ while this one was active.
- * This handles the situation where a sync. fwcmd was processing
- * the CQ while the interrupt/dpc tries to process it.
- * The sync process gets to continue -- but it is now
- * responsible for the rearming.
- */
- if (num_processed > 0 || mcc->rearm == true) {
- db.dw[0] = 0; /* clear */
- AMAP_SET_BITS_PTR(CQ_DB, qid, &db, cq_ring->id);
- AMAP_SET_BITS_PTR(CQ_DB, rearm, &db, mcc->rearm);
- AMAP_SET_BITS_PTR(CQ_DB, event, &db, false);
- AMAP_SET_BITS_PTR(CQ_DB, num_popped, &db, num_processed);
-
- PD_WRITE(pfob, cq_db, db.dw[0]);
- }
- /*
- * Update the consumer index after ringing the CQ doorbell.
- * We don't want another thread to post more WRBs before we
- * have CQ space available.
- */
- mp_ring_consume_multiple(mp_ring, consumed);
-
- /* Clear the processing flag. */
- mcc->processing = 0;
-
-Error:
- spin_unlock_irqrestore(&pfob->cq_lock, pfob->cq_irq);
- /*
- * Use the local variable to detect if the current thread
- * holds the WRB post lock. If rearm is false, this is
- * either a synchronous command, or the upper layer driver is polling
- * from a thread. We do not drive the queue from that
- * context since the driver may hold the
- * wrb post lock already.
- */
- if (rearm)
- be_drive_mcc_wrb_queue(mcc);
- else
- pfob->pend_queue_driving = 1;
-
- return BE_SUCCESS;
-}
-
-/*
- *============================================================================
- * P U B L I C R O U T I N E S
- *============================================================================
- */
-
-/*
- This routine creates an MCC object. This object contains an MCC send queue
- and a CQ private to the MCC.
-
- pcontroller - Handle to a function object
-
- EqObject - EQ object that will be used to dispatch this MCC
-
- ppMccObject - Pointer to an internal Mcc Object returned.
-
- Returns BE_SUCCESS if successfull,, otherwise a useful error code
- is returned.
-
- IRQL < DISPATCH_LEVEL
-
-*/
-int
-be_mcc_ring_create(struct be_function_object *pfob,
- struct ring_desc *rd, u32 length,
- struct be_mcc_wrb_context *context_array,
- u32 num_context_entries,
- struct be_cq_object *cq, struct be_mcc_object *mcc)
-{
- int status = 0;
-
- struct FWCMD_COMMON_MCC_CREATE *fwcmd = NULL;
- struct MCC_WRB_AMAP *wrb = NULL;
- u32 num_entries_encoded, n, i;
- void *va = NULL;
- unsigned long irql;
-
- if (length < sizeof(struct MCC_WRB_AMAP) * 2) {
- TRACE(DL_ERR, "Invalid MCC ring length:%d", length);
- return BE_NOT_OK;
- }
- /*
- * Reduce the actual ring size to be less than the number
- * of context entries. This ensures that we run out of
- * ring WRBs first so the queuing works correctly. We never
- * queue based on context structs.
- */
- if (num_context_entries + 1 <
- length / sizeof(struct MCC_WRB_AMAP) - 1) {
-
- u32 max_length =
- (num_context_entries + 2) * sizeof(struct MCC_WRB_AMAP);
-
- if (is_power_of_2(max_length))
- length = __roundup_pow_of_two(max_length+1) / 2;
- else
- length = __roundup_pow_of_two(max_length) / 2;
-
- ASSERT(length <= max_length);
-
- TRACE(DL_WARN,
- "MCC ring length reduced based on context entries."
- " length:%d wrbs:%d context_entries:%d", length,
- (int) (length / sizeof(struct MCC_WRB_AMAP)),
- num_context_entries);
- }
-
- spin_lock_irqsave(&pfob->post_lock, irql);
-
- num_entries_encoded =
- be_ring_length_to_encoding(length, sizeof(struct MCC_WRB_AMAP));
-
- /* Init MCC object. */
- memset(mcc, 0, sizeof(*mcc));
- mcc->parent_function = pfob;
- mcc->cq_object = cq;
-
- INIT_LIST_HEAD(&mcc->backlog);
-
- wrb = be_function_peek_mcc_wrb(pfob);
- if (!wrb) {
- ASSERT(wrb);
- TRACE(DL_ERR, "No free MCC WRBs in create EQ.");
- status = BE_STATUS_NO_MCC_WRB;
- goto error;
- }
- /* Prepares an embedded fwcmd, including request/response sizes. */
- fwcmd = BE_PREPARE_EMBEDDED_FWCMD(pfob, wrb, COMMON_MCC_CREATE);
-
- fwcmd->params.request.num_pages = DIV_ROUND_UP(length, PAGE_SIZE);
- /*
- * Program MCC ring context
- */
- AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, pdid,
- &fwcmd->params.request.context, 0);
- AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, invalid,
- &fwcmd->params.request.context, false);
- AMAP_SET_BITS_PTR(MCC_RING_CONTEXT, ring_size,
- &fwcmd->params.request.context, num_entries_encoded);
-
- n = cq->cq_id;
- AMAP_SET_BITS_PTR(MCC_RING_CONTEXT,
- cq_id, &fwcmd->params.request.context, n);
- be_rd_to_pa_list(rd, fwcmd->params.request.pages,
- ARRAY_SIZE(fwcmd->params.request.pages));
- /* Post the f/w command */
- status = be_function_post_mcc_wrb(pfob, wrb, NULL, NULL, NULL,
- NULL, NULL, fwcmd, NULL);
- if (status != BE_SUCCESS) {
- TRACE(DL_ERR, "MCC to create CQ failed.");
- goto error;
- }
- /*
- * Create a linked list of context structures
- */
- mcc->wrb_context.base = context_array;
- mcc->wrb_context.num = num_context_entries;
- INIT_LIST_HEAD(&mcc->wrb_context.list_head);
- memset(context_array, 0,
- sizeof(struct be_mcc_wrb_context) * num_context_entries);
- for (i = 0; i < mcc->wrb_context.num; i++) {
- list_add_tail(&context_array[i].next,
- &mcc->wrb_context.list_head);
- }
-
- /*
- *
- * Create an mcc_ring for tracking WRB hw ring
- */
- va = rd->va;
- ASSERT(va);
- mp_ring_create(&mcc->sq.ring, length / sizeof(struct MCC_WRB_AMAP),
- sizeof(struct MCC_WRB_AMAP), va);
- mcc->sq.ring.id = fwcmd->params.response.id;
- /*
- * Init a mcc_ring for tracking the MCC CQ.
- */
- ASSERT(cq->va);
- mp_ring_create(&mcc->cq.ring, cq->num_entries,
- sizeof(struct MCC_CQ_ENTRY_AMAP), cq->va);
- mcc->cq.ring.id = cq->cq_id;
-
- /* Force zeroing of CQ. */
- memset(cq->va, 0, cq->num_entries * sizeof(struct MCC_CQ_ENTRY_AMAP));
-
- /* Initialize debug index. */
- mcc->consumed_index = 0;
-
- atomic_inc(&cq->ref_count);
- pfob->mcc = mcc;
-
- TRACE(DL_INFO, "MCC ring created. id:%d bytes:%d cq_id:%d cq_entries:%d"
- " num_context:%d", mcc->sq.ring.id, length,
- cq->cq_id, cq->num_entries, num_context_entries);
-
-error:
- spin_unlock_irqrestore(&pfob->post_lock, irql);
- if (pfob->pend_queue_driving && pfob->mcc) {
- pfob->pend_queue_driving = 0;
- be_drive_mcc_wrb_queue(pfob->mcc);
- }
- return status;
-}
-
-/*
- This routine destroys an MCC send queue
-
- MccObject - Internal Mcc Object to be destroyed.
-
- Returns BE_SUCCESS if successfull, otherwise an error code is returned.
-
- IRQL < DISPATCH_LEVEL
-
- The caller of this routine must ensure that no other WRB may be posted
- until this routine returns.
-
-*/
-int be_mcc_ring_destroy(struct be_mcc_object *mcc)
-{
- int status = 0;
- struct be_function_object *pfob = mcc->parent_function;
-
-
- ASSERT(mcc->processing == 0);
-
- /*
- * Remove the ring from the function object.
- * This transitions back to mailbox mode.
- */
- pfob->mcc = NULL;
-
- /* Send fwcmd to destroy the queue. (Using the mailbox.) */
- status = be_function_ring_destroy(mcc->parent_function, mcc->sq.ring.id,
- FWCMD_RING_TYPE_MCC, NULL, NULL, NULL, NULL);
- ASSERT(status == 0);
-
- /* Release the SQ reference to the CQ */
- atomic_dec(&mcc->cq_object->ref_count);
-
- return status;
-}
-
-static void
-mcc_wrb_sync_cb(void *context, int staus, struct MCC_WRB_AMAP *wrb)
-{
- struct be_mcc_wrb_context *wrb_context =
- (struct be_mcc_wrb_context *) context;
- ASSERT(wrb_context);
- *wrb_context->users_final_status = staus;
-}
-
-/*
- This routine posts a command to the MCC send queue
-
- mcc - Internal Mcc Object to be destroyed.
-
- wrb - wrb to post.
-
- Returns BE_SUCCESS if successfull, otherwise an error code is returned.
-
- IRQL < DISPATCH_LEVEL if CompletionCallback is not NULL
- IRQL <=DISPATCH_LEVEL if CompletionCallback is NULL
-
- If this routine is called with CompletionCallback != NULL the
- call is considered to be asynchronous and will return as soon
- as the WRB is posted to the MCC with BE_PENDING.
-
- If CompletionCallback is NULL, then this routine will not return until
- a completion for this MCC command has been processed.
- If called at DISPATCH_LEVEL the CompletionCallback must be NULL.
-
- This routine should only be called if the MPU has been boostraped past
- mailbox mode.
-
-
-*/
-int
-_be_mpu_post_wrb_ring(struct be_mcc_object *mcc, struct MCC_WRB_AMAP *wrb,
- struct be_mcc_wrb_context *wrb_context)
-{
-
- struct MCC_WRB_AMAP *ring_wrb = NULL;
- int status = BE_PENDING;
- int final_status = BE_PENDING;
- mcc_wrb_cqe_callback cb = NULL;
- struct MCC_DB_AMAP mcc_db;
- u32 embedded;
-
- ASSERT(mp_ring_num_empty(&mcc->sq.ring) > 0);
- /*
- * Input wrb is most likely the next wrb in the ring, since the client
- * can peek at the address.
- */
- ring_wrb = mp_ring_producer_ptr(&mcc->sq.ring);
- if (wrb != ring_wrb) {
- /* If not equal, copy it into the ring. */
- memcpy(ring_wrb, wrb, sizeof(struct MCC_WRB_AMAP));
- }
-#ifdef BE_DEBUG
- wrb_context->ring_wrb = ring_wrb;
-#endif
- embedded = AMAP_GET_BITS_PTR(MCC_WRB, embedded, ring_wrb);
- if (embedded) {
- /* embedded commands will have the response within the WRB. */
- wrb_context->wrb = ring_wrb;
- } else {
- /*
- * non-embedded commands will not have the response
- * within the WRB, and they may complete out-of-order.
- * The WRB will not be valid to inspect
- * during the completion.
- */
- wrb_context->wrb = NULL;
- }
- cb = wrb_context->cb;
-
- if (cb == NULL) {
- /* Assign our internal callback if this is a
- * synchronous call. */
- wrb_context->cb = mcc_wrb_sync_cb;
- wrb_context->cb_context = wrb_context;
- wrb_context->users_final_status = &final_status;
- }
- /* Increment producer index */
-
- mcc_db.dw[0] = 0; /* initialize */
- AMAP_SET_BITS_PTR(MCC_DB, rid, &mcc_db, mcc->sq.ring.id);
- AMAP_SET_BITS_PTR(MCC_DB, numPosted, &mcc_db, 1);
-
- mp_ring_produce(&mcc->sq.ring);
- PD_WRITE(mcc->parent_function, mpu_mcc_db, mcc_db.dw[0]);
- TRACE(DL_INFO, "pidx: %x and cidx: %x.", mcc->sq.ring.pidx,
- mcc->sq.ring.cidx);
-
- if (cb == NULL) {
- int polls = 0; /* At >= 1 us per poll */
- /* Wait until this command completes, polling the CQ. */
- do {
- TRACE(DL_INFO, "FWCMD submitted in the poll mode.");
- /* Do not rearm CQ in this context. */
- be_mcc_process_cq(mcc, false);
-
- if (final_status == BE_PENDING) {
- if ((++polls & 0x7FFFF) == 0) {
- TRACE(DL_WARN,
- "Warning : polling MCC CQ for %d"
- "ms.", polls / 1000);
- }
-
- udelay(1);
- }
-
- /* final_status changed when the command completes */
- } while (final_status == BE_PENDING);
-
- status = final_status;
- }
-
- return status;
-}
-
-struct MCC_WRB_AMAP *
-_be_mpu_peek_ring_wrb(struct be_mcc_object *mcc, bool driving_queue)
-{
- /* If we have queued items, do not allow a post to bypass the queue. */
- if (!driving_queue && !list_empty(&mcc->backlog))
- return NULL;
-
- if (mp_ring_num_empty(&mcc->sq.ring) <= 0)
- return NULL;
- return (struct MCC_WRB_AMAP *) mp_ring_producer_ptr(&mcc->sq.ring);
-}
-
-int
-be_mpu_init_mailbox(struct be_function_object *pfob, struct ring_desc *mailbox)
-{
- ASSERT(mailbox);
- pfob->mailbox.va = mailbox->va;
- pfob->mailbox.pa = cpu_to_le64(mailbox->pa);
- pfob->mailbox.length = mailbox->length;
-
- ASSERT(((u32)(size_t)pfob->mailbox.va & 0xf) == 0);
- ASSERT(((u32)(size_t)pfob->mailbox.pa & 0xf) == 0);
- /*
- * Issue the WRB to set MPU endianness
- */
- {
- u64 *endian_check = (u64 *) (pfob->mailbox.va +
- offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8);
- *endian_check = 0xFF1234FFFF5678FFULL;
- }
-
- be_mcc_mailbox_notify_and_wait(pfob);
-
- return BE_SUCCESS;
-}
-
-
-/*
- This routine posts a command to the MCC mailbox.
-
- FuncObj - Function Object to post the WRB on behalf of.
- wrb - wrb to post.
- CompletionCallback - Address of a callback routine to invoke once the WRB
- is completed.
- CompletionCallbackContext - Opaque context to be passed during the call to
- the CompletionCallback.
- Returns BE_SUCCESS if successfull, otherwise an error code is returned.
-
- IRQL <=DISPATCH_LEVEL if CompletionCallback is NULL
-
- This routine will block until a completion for this MCC command has been
- processed. If called at DISPATCH_LEVEL the CompletionCallback must be NULL.
-
- This routine should only be called if the MPU has not been boostraped past
- mailbox mode.
-*/
-int
-_be_mpu_post_wrb_mailbox(struct be_function_object *pfob,
- struct MCC_WRB_AMAP *wrb, struct be_mcc_wrb_context *wrb_context)
-{
- struct MCC_MAILBOX_AMAP *mailbox = NULL;
- struct MCC_WRB_AMAP *mb_wrb;
- struct MCC_CQ_ENTRY_AMAP *mb_cq;
- u32 offset, status;
-
- ASSERT(pfob->mcc == NULL);
- mailbox = pfob->mailbox.va;
- ASSERT(mailbox);
-
- offset = offsetof(struct BE_MCC_MAILBOX_AMAP, wrb)/8;
- mb_wrb = (struct MCC_WRB_AMAP *) (u8 *)mailbox + offset;
- if (mb_wrb != wrb) {
- memset(mailbox, 0, sizeof(*mailbox));
- memcpy(mb_wrb, wrb, sizeof(struct MCC_WRB_AMAP));
- }
- /* The callback can inspect the final WRB to get output parameters. */
- wrb_context->wrb = mb_wrb;
-
- be_mcc_mailbox_notify_and_wait(pfob);
-
- /* A command completed. Use tag to determine which command. */
- offset = offsetof(struct BE_MCC_MAILBOX_AMAP, cq)/8;
- mb_cq = (struct MCC_CQ_ENTRY_AMAP *) ((u8 *)mailbox + offset);
- be_mcc_process_cqe(pfob, mb_cq);
-
- status = AMAP_GET_BITS_PTR(MCC_CQ_ENTRY, completion_status, mb_cq);
- if (status)
- status = BE_NOT_OK;
- return status;
-}
-
-struct be_mcc_wrb_context *
-_be_mcc_allocate_wrb_context(struct be_function_object *pfob)
-{
- struct be_mcc_wrb_context *context = NULL;
- unsigned long irq;
-
- spin_lock_irqsave(&pfob->mcc_context_lock, irq);
-
- if (!pfob->mailbox.default_context_allocated) {
- /* Use the single default context that we
- * always have allocated. */
- pfob->mailbox.default_context_allocated = true;
- context = &pfob->mailbox.default_context;
- } else if (pfob->mcc) {
- /* Get a context from the free list. If any are available. */
- if (!list_empty(&pfob->mcc->wrb_context.list_head)) {
- context = list_first_entry(
- &pfob->mcc->wrb_context.list_head,
- struct be_mcc_wrb_context, next);
- }
- }
-
- spin_unlock_irqrestore(&pfob->mcc_context_lock, irq);
-
- return context;
-}
-
-void
-_be_mcc_free_wrb_context(struct be_function_object *pfob,
- struct be_mcc_wrb_context *context)
-{
- unsigned long irq;
-
- ASSERT(context);
- /*
- * Zero during free to try and catch any bugs where the context
- * is accessed after a free.
- */
- memset(context, 0, sizeof(context));
-
- spin_lock_irqsave(&pfob->mcc_context_lock, irq);
-
- if (context == &pfob->mailbox.default_context) {
- /* Free the default context. */
- ASSERT(pfob->mailbox.default_context_allocated);
- pfob->mailbox.default_context_allocated = false;
- } else {
- /* Add to free list. */
- ASSERT(pfob->mcc);
- list_add_tail(&context->next,
- &pfob->mcc->wrb_context.list_head);
- }
-
- spin_unlock_irqrestore(&pfob->mcc_context_lock, irq);
-}
-
-int
-be_mcc_add_async_event_callback(struct be_mcc_object *mcc_object,
- mcc_async_event_callback cb, void *cb_context)
-{
- /* Lock against anyone trying to change the callback/context pointers
- * while being used. */
- spin_lock_irqsave(&mcc_object->parent_function->cq_lock,
- mcc_object->parent_function->cq_irq);
-
- /* Assign the async callback. */
- mcc_object->async_context = cb_context;
- mcc_object->async_cb = cb;
-
- spin_unlock_irqrestore(&mcc_object->parent_function->cq_lock,
- mcc_object->parent_function->cq_irq);
-
- return BE_SUCCESS;
-}
-
-#define MPU_EP_CONTROL 0
-#define MPU_EP_SEMAPHORE 0xac
-
-/*
- *-------------------------------------------------------------------
- * Function: be_wait_for_POST_complete
- * Waits until the BladeEngine POST completes (either in error or success).
- * pfob -
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-static int be_wait_for_POST_complete(struct be_function_object *pfob)
-{
- struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
- int s;
- u32 post_error, post_stage;
-
- const u32 us_per_loop = 1000; /* 1000us */
- const u32 print_frequency_loops = 1000000 / us_per_loop;
- const u32 max_loops = 60 * print_frequency_loops;
- u32 loops = 0;
-
- /*
- * Wait for arm fw indicating it is done or a fatal error happened.
- * Note: POST can take some time to complete depending on configuration
- * settings (consider ARM attempts to acquire an IP address
- * over DHCP!!!).
- *
- */
- do {
- status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
- post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
- error, &status);
- post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
- stage, &status);
- if (0 == (loops % print_frequency_loops)) {
- /* Print current status */
- TRACE(DL_INFO, "POST status = 0x%x (stage = 0x%x)",
- status.dw[0], post_stage);
- }
- udelay(us_per_loop);
- } while ((post_error != 1) &&
- (post_stage != POST_STAGE_ARMFW_READY) &&
- (++loops < max_loops));
-
- if (post_error == 1) {
- TRACE(DL_ERR, "POST error! Status = 0x%x (stage = 0x%x)",
- status.dw[0], post_stage);
- s = BE_NOT_OK;
- } else if (post_stage != POST_STAGE_ARMFW_READY) {
- TRACE(DL_ERR, "POST time-out! Status = 0x%x (stage = 0x%x)",
- status.dw[0], post_stage);
- s = BE_NOT_OK;
- } else {
- s = BE_SUCCESS;
- }
- return s;
-}
-
-/*
- *-------------------------------------------------------------------
- * Function: be_kickoff_and_wait_for_POST
- * Interacts with the BladeEngine management processor to initiate POST, and
- * subsequently waits until POST completes (either in error or success).
- * The caller must acquire the reset semaphore before initiating POST
- * to prevent multiple drivers interacting with the management processor.
- * Once POST is complete the caller must release the reset semaphore.
- * Callers who only want to wait for POST complete may call
- * be_wait_for_POST_complete.
- * pfob -
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-static int
-be_kickoff_and_wait_for_POST(struct be_function_object *pfob)
-{
- struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
- int s;
-
- const u32 us_per_loop = 1000; /* 1000us */
- const u32 print_frequency_loops = 1000000 / us_per_loop;
- const u32 max_loops = 5 * print_frequency_loops;
- u32 loops = 0;
- u32 post_error, post_stage;
-
- /* Wait for arm fw awaiting host ready or a fatal error happened. */
- TRACE(DL_INFO, "Wait for BladeEngine ready to POST");
- do {
- status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
- post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
- error, &status);
- post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT,
- stage, &status);
- if (0 == (loops % print_frequency_loops)) {
- /* Print current status */
- TRACE(DL_INFO, "POST status = 0x%x (stage = 0x%x)",
- status.dw[0], post_stage);
- }
- udelay(us_per_loop);
- } while ((post_error != 1) &&
- (post_stage < POST_STAGE_AWAITING_HOST_RDY) &&
- (++loops < max_loops));
-
- if (post_error == 1) {
- TRACE(DL_ERR, "Pre-POST error! Status = 0x%x (stage = 0x%x)",
- status.dw[0], post_stage);
- s = BE_NOT_OK;
- } else if (post_stage == POST_STAGE_AWAITING_HOST_RDY) {
- iowrite32(POST_STAGE_HOST_RDY, pfob->csr_va + MPU_EP_SEMAPHORE);
-
- /* Wait for POST to complete */
- s = be_wait_for_POST_complete(pfob);
- } else {
- /*
- * Either a timeout waiting for host ready signal or POST has
- * moved ahead without requiring a host ready signal.
- * Might as well give POST a chance to complete
- * (or timeout again).
- */
- s = be_wait_for_POST_complete(pfob);
- }
- return s;
-}
-
-/*
- *-------------------------------------------------------------------
- * Function: be_pci_soft_reset
- * This function is called to issue a BladeEngine soft reset.
- * Callers should acquire the soft reset semaphore before calling this
- * function. Additionaly, callers should ensure they cannot be pre-empted
- * while the routine executes. Upon completion of this routine, callers
- * should release the reset semaphore. This routine implicitly waits
- * for BladeEngine POST to complete.
- * pfob -
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-int be_pci_soft_reset(struct be_function_object *pfob)
-{
- struct PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
- struct PCICFG_ONLINE0_CSR_AMAP pciOnline0;
- struct PCICFG_ONLINE1_CSR_AMAP pciOnline1;
- struct EP_CONTROL_CSR_AMAP epControlCsr;
- int status = BE_SUCCESS;
- u32 i, soft_reset_bit;
-
- TRACE(DL_NOTE, "PCI reset...");
-
- /* Issue soft reset #1 to get BladeEngine into a known state. */
- soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
- AMAP_SET_BITS_PTR(PCICFG_SOFT_RESET_CSR, softreset, soft_reset.dw, 1);
- PCICFG0_WRITE(pfob, host_timer_int_ctrl, soft_reset.dw[0]);
- /*
- * wait til soft reset is deasserted - hardware
- * deasserts after some time.
- */
- i = 0;
- do {
- udelay(50);
- soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
- soft_reset_bit = AMAP_GET_BITS_PTR(PCICFG_SOFT_RESET_CSR,
- softreset, soft_reset.dw);
- } while (soft_reset_bit && (i++ < 1024));
- if (soft_reset_bit != 0) {
- TRACE(DL_ERR, "Soft-reset #1 did not deassert as expected.");
- status = BE_NOT_OK;
- goto Error_label;
- }
- /* Mask everything */
- PCICFG0_WRITE(pfob, ue_status_low_mask, 0xFFFFFFFF);
- PCICFG0_WRITE(pfob, ue_status_hi_mask, 0xFFFFFFFF);
- /*
- * Set everything offline except MPU IRAM (it is offline with
- * the soft-reset, but soft-reset does not reset the PCICFG registers!)
- */
- pciOnline0.dw[0] = 0;
- pciOnline1.dw[0] = 0;
- AMAP_SET_BITS_PTR(PCICFG_ONLINE1_CSR, mpu_iram_online,
- pciOnline1.dw, 1);
- PCICFG0_WRITE(pfob, online0, pciOnline0.dw[0]);
- PCICFG0_WRITE(pfob, online1, pciOnline1.dw[0]);
-
- udelay(20000);
-
- /* Issue soft reset #2. */
- AMAP_SET_BITS_PTR(PCICFG_SOFT_RESET_CSR, softreset, soft_reset.dw, 1);
- PCICFG0_WRITE(pfob, host_timer_int_ctrl, soft_reset.dw[0]);
- /*
- * wait til soft reset is deasserted - hardware
- * deasserts after some time.
- */
- i = 0;
- do {
- udelay(50);
- soft_reset.dw[0] = PCICFG0_READ(pfob, soft_reset);
- soft_reset_bit = AMAP_GET_BITS_PTR(PCICFG_SOFT_RESET_CSR,
- softreset, soft_reset.dw);
- } while (soft_reset_bit && (i++ < 1024));
- if (soft_reset_bit != 0) {
- TRACE(DL_ERR, "Soft-reset #1 did not deassert as expected.");
- status = BE_NOT_OK;
- goto Error_label;
- }
-
-
- udelay(20000);
-
- /* Take MPU out of reset. */
-
- epControlCsr.dw[0] = ioread32(pfob->csr_va + MPU_EP_CONTROL);
- AMAP_SET_BITS_PTR(EP_CONTROL_CSR, CPU_reset, &epControlCsr, 0);
- iowrite32((u32)epControlCsr.dw[0], pfob->csr_va + MPU_EP_CONTROL);
-
- /* Kickoff BE POST and wait for completion */
- status = be_kickoff_and_wait_for_POST(pfob);
-
-Error_label:
- return status;
-}
-
-
-/*
- *-------------------------------------------------------------------
- * Function: be_pci_reset_required
- * This private function is called to detect if a host entity is
- * required to issue a PCI soft reset and subsequently drive
- * BladeEngine POST. Scenarios where this is required:
- * 1) BIOS-less configuration
- * 2) Hot-swap/plug/power-on
- * pfob -
- * return true if a reset is required, false otherwise
- *-------------------------------------------------------------------
- */
-static bool be_pci_reset_required(struct be_function_object *pfob)
-{
- struct MGMT_HBA_POST_STATUS_STRUCT_AMAP status;
- bool do_reset = false;
- u32 post_error, post_stage;
-
- /*
- * Read the POST status register
- */
- status.dw[0] = ioread32(pfob->csr_va + MPU_EP_SEMAPHORE);
- post_error = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT, error,
- &status);
- post_stage = AMAP_GET_BITS_PTR(MGMT_HBA_POST_STATUS_STRUCT, stage,
- &status);
- if (post_stage <= POST_STAGE_AWAITING_HOST_RDY) {
- /*
- * If BladeEngine is waiting for host ready indication,
- * we want to do a PCI reset.
- */
- do_reset = true;
- }
-
- return do_reset;
-}
-
-/*
- *-------------------------------------------------------------------
- * Function: be_drive_POST
- * This function is called to drive BladeEngine POST. The
- * caller should ensure they cannot be pre-empted while this routine executes.
- * pfob -
- * return status - BE_SUCCESS (0) on success. Negative error code on failure.
- *-------------------------------------------------------------------
- */
-int be_drive_POST(struct be_function_object *pfob)
-{
- int status;
-
- if (false != be_pci_reset_required(pfob)) {
- /* PCI reset is needed (implicitly starts and waits for POST) */
- status = be_pci_soft_reset(pfob);
- } else {
- /* No PCI reset is needed, start POST */
- status = be_kickoff_and_wait_for_POST(pfob);
- }
-
- return status;
-}
diff --git a/drivers/staging/benet/mpu.h b/drivers/staging/benet/mpu.h
deleted file mode 100644
index 41f3f87..0000000
--- a/drivers/staging/benet/mpu.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __mpu_amap_h__
-#define __mpu_amap_h__
-#include "ep.h"
-
-/* Provide control parameters for the Managment Processor Unit. */
-struct BE_MPU_CSRMAP_AMAP {
- struct BE_EP_CSRMAP_AMAP ep;
- u8 rsvd0[128]; /* DWORD 64 */
- u8 rsvd1[32]; /* DWORD 68 */
- u8 rsvd2[192]; /* DWORD 69 */
- u8 rsvd3[192]; /* DWORD 75 */
- u8 rsvd4[32]; /* DWORD 81 */
- u8 rsvd5[32]; /* DWORD 82 */
- u8 rsvd6[32]; /* DWORD 83 */
- u8 rsvd7[32]; /* DWORD 84 */
- u8 rsvd8[32]; /* DWORD 85 */
- u8 rsvd9[32]; /* DWORD 86 */
- u8 rsvd10[32]; /* DWORD 87 */
- u8 rsvd11[32]; /* DWORD 88 */
- u8 rsvd12[32]; /* DWORD 89 */
- u8 rsvd13[32]; /* DWORD 90 */
- u8 rsvd14[32]; /* DWORD 91 */
- u8 rsvd15[32]; /* DWORD 92 */
- u8 rsvd16[32]; /* DWORD 93 */
- u8 rsvd17[32]; /* DWORD 94 */
- u8 rsvd18[32]; /* DWORD 95 */
- u8 rsvd19[32]; /* DWORD 96 */
- u8 rsvd20[32]; /* DWORD 97 */
- u8 rsvd21[32]; /* DWORD 98 */
- u8 rsvd22[32]; /* DWORD 99 */
- u8 rsvd23[32]; /* DWORD 100 */
- u8 rsvd24[32]; /* DWORD 101 */
- u8 rsvd25[32]; /* DWORD 102 */
- u8 rsvd26[32]; /* DWORD 103 */
- u8 rsvd27[32]; /* DWORD 104 */
- u8 rsvd28[96]; /* DWORD 105 */
- u8 rsvd29[32]; /* DWORD 108 */
- u8 rsvd30[32]; /* DWORD 109 */
- u8 rsvd31[32]; /* DWORD 110 */
- u8 rsvd32[32]; /* DWORD 111 */
- u8 rsvd33[32]; /* DWORD 112 */
- u8 rsvd34[96]; /* DWORD 113 */
- u8 rsvd35[32]; /* DWORD 116 */
- u8 rsvd36[32]; /* DWORD 117 */
- u8 rsvd37[32]; /* DWORD 118 */
- u8 rsvd38[32]; /* DWORD 119 */
- u8 rsvd39[32]; /* DWORD 120 */
- u8 rsvd40[32]; /* DWORD 121 */
- u8 rsvd41[134][32]; /* DWORD 122 */
-} __packed;
-struct MPU_CSRMAP_AMAP {
- u32 dw[256];
-};
-
-#endif /* __mpu_amap_h__ */
diff --git a/drivers/staging/benet/mpu_context.h b/drivers/staging/benet/mpu_context.h
deleted file mode 100644
index 8ce90f9..0000000
--- a/drivers/staging/benet/mpu_context.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __mpu_context_amap_h__
-#define __mpu_context_amap_h__
-
-/*
- * Management command and control ring context. The MPUs BTLR_CTRL1 CSR
- * controls the writeback behavior of the producer and consumer index values.
- */
-struct BE_MCC_RING_CONTEXT_AMAP {
- u8 con_index[16]; /* DWORD 0 */
- u8 ring_size[4]; /* DWORD 0 */
- u8 cq_id[11]; /* DWORD 0 */
- u8 rsvd0; /* DWORD 0 */
- u8 prod_index[16]; /* DWORD 1 */
- u8 pdid[15]; /* DWORD 1 */
- u8 invalid; /* DWORD 1 */
- u8 cmd_pending_current[7]; /* DWORD 2 */
- u8 rsvd1[25]; /* DWORD 2 */
- u8 hpi_port_cq_id[11]; /* DWORD 3 */
- u8 rsvd2[5]; /* DWORD 3 */
- u8 cmd_pending_max[7]; /* DWORD 3 */
- u8 rsvd3[9]; /* DWORD 3 */
-} __packed;
-struct MCC_RING_CONTEXT_AMAP {
- u32 dw[4];
-};
-
-#endif /* __mpu_context_amap_h__ */
diff --git a/drivers/staging/benet/pcicfg.h b/drivers/staging/benet/pcicfg.h
deleted file mode 100644
index 7c15684..0000000
--- a/drivers/staging/benet/pcicfg.h
+++ /dev/null
@@ -1,825 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __pcicfg_amap_h__
-#define __pcicfg_amap_h__
-
-/* Vendor and Device ID Register. */
-struct BE_PCICFG_ID_CSR_AMAP {
- u8 vendorid[16]; /* DWORD 0 */
- u8 deviceid[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ID_CSR_AMAP {
- u32 dw[1];
-};
-
-/* IO Bar Register. */
-struct BE_PCICFG_IOBAR_CSR_AMAP {
- u8 iospace; /* DWORD 0 */
- u8 rsvd0[7]; /* DWORD 0 */
- u8 iobar[24]; /* DWORD 0 */
-} __packed;
-struct PCICFG_IOBAR_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Memory BAR 0 Register. */
-struct BE_PCICFG_MEMBAR0_CSR_AMAP {
- u8 memspace; /* DWORD 0 */
- u8 type[2]; /* DWORD 0 */
- u8 pf; /* DWORD 0 */
- u8 rsvd0[10]; /* DWORD 0 */
- u8 membar0[18]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR0_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Memory BAR 1 - Low Address Register. */
-struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP {
- u8 memspace; /* DWORD 0 */
- u8 type[2]; /* DWORD 0 */
- u8 pf; /* DWORD 0 */
- u8 rsvd0[13]; /* DWORD 0 */
- u8 membar1lo[15]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR1_LO_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Memory BAR 1 - High Address Register. */
-struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP {
- u8 membar1hi[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR1_HI_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Memory BAR 2 - Low Address Register. */
-struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP {
- u8 memspace; /* DWORD 0 */
- u8 type[2]; /* DWORD 0 */
- u8 pf; /* DWORD 0 */
- u8 rsvd0[17]; /* DWORD 0 */
- u8 membar2lo[11]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR2_LO_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Memory BAR 2 - High Address Register. */
-struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP {
- u8 membar2hi[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MEMBAR2_HI_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Subsystem Vendor and ID (Function 0) Register. */
-struct BE_PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP {
- u8 subsys_vendor_id[16]; /* DWORD 0 */
- u8 subsys_id[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Subsystem Vendor and ID (Function 1) Register. */
-struct BE_PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP {
- u8 subsys_vendor_id[16]; /* DWORD 0 */
- u8 subsys_id[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Semaphore Register. */
-struct BE_PCICFG_SEMAPHORE_CSR_AMAP {
- u8 locked; /* DWORD 0 */
- u8 rsvd0[31]; /* DWORD 0 */
-} __packed;
-struct PCICFG_SEMAPHORE_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Soft Reset Register. */
-struct BE_PCICFG_SOFT_RESET_CSR_AMAP {
- u8 rsvd0[7]; /* DWORD 0 */
- u8 softreset; /* DWORD 0 */
- u8 rsvd1[16]; /* DWORD 0 */
- u8 nec_ll_rcvdetect_i[8]; /* DWORD 0 */
-} __packed;
-struct PCICFG_SOFT_RESET_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Unrecoverable Error Status (Low) Register. Each bit corresponds to
- * an internal Unrecoverable Error. These are set by hardware and may be
- * cleared by writing a one to the respective bit(s) to be cleared. Any
- * bit being set that is also unmasked will result in Unrecoverable Error
- * interrupt notification to the host CPU and/or Server Management chip
- * and the transitioning of BladeEngine to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP {
- u8 cev_ue_status; /* DWORD 0 */
- u8 ctx_ue_status; /* DWORD 0 */
- u8 dbuf_ue_status; /* DWORD 0 */
- u8 erx_ue_status; /* DWORD 0 */
- u8 host_ue_status; /* DWORD 0 */
- u8 mpu_ue_status; /* DWORD 0 */
- u8 ndma_ue_status; /* DWORD 0 */
- u8 ptc_ue_status; /* DWORD 0 */
- u8 rdma_ue_status; /* DWORD 0 */
- u8 rxf_ue_status; /* DWORD 0 */
- u8 rxips_ue_status; /* DWORD 0 */
- u8 rxulp0_ue_status; /* DWORD 0 */
- u8 rxulp1_ue_status; /* DWORD 0 */
- u8 rxulp2_ue_status; /* DWORD 0 */
- u8 tim_ue_status; /* DWORD 0 */
- u8 tpost_ue_status; /* DWORD 0 */
- u8 tpre_ue_status; /* DWORD 0 */
- u8 txips_ue_status; /* DWORD 0 */
- u8 txulp0_ue_status; /* DWORD 0 */
- u8 txulp1_ue_status; /* DWORD 0 */
- u8 uc_ue_status; /* DWORD 0 */
- u8 wdma_ue_status; /* DWORD 0 */
- u8 txulp2_ue_status; /* DWORD 0 */
- u8 host1_ue_status; /* DWORD 0 */
- u8 p0_ob_link_ue_status; /* DWORD 0 */
- u8 p1_ob_link_ue_status; /* DWORD 0 */
- u8 host_gpio_ue_status; /* DWORD 0 */
- u8 mbox_netw_ue_status; /* DWORD 0 */
- u8 mbox_stor_ue_status; /* DWORD 0 */
- u8 axgmac0_ue_status; /* DWORD 0 */
- u8 axgmac1_ue_status; /* DWORD 0 */
- u8 mpu_intpend_ue_status; /* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_LOW_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Unrecoverable Error Status (High) Register. Each bit corresponds to
- * an internal Unrecoverable Error. These are set by hardware and may be
- * cleared by writing a one to the respective bit(s) to be cleared. Any
- * bit being set that is also unmasked will result in Unrecoverable Error
- * interrupt notification to the host CPU and/or Server Management chip;
- * and the transitioning of BladeEngine to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP {
- u8 jtag_ue_status; /* DWORD 0 */
- u8 lpcmemhost_ue_status; /* DWORD 0 */
- u8 mgmt_mac_ue_status; /* DWORD 0 */
- u8 mpu_iram_ue_status; /* DWORD 0 */
- u8 pcs0online_ue_status; /* DWORD 0 */
- u8 pcs1online_ue_status; /* DWORD 0 */
- u8 pctl0_ue_status; /* DWORD 0 */
- u8 pctl1_ue_status; /* DWORD 0 */
- u8 pmem_ue_status; /* DWORD 0 */
- u8 rr_ue_status; /* DWORD 0 */
- u8 rxpp_ue_status; /* DWORD 0 */
- u8 txpb_ue_status; /* DWORD 0 */
- u8 txp_ue_status; /* DWORD 0 */
- u8 xaui_ue_status; /* DWORD 0 */
- u8 arm_ue_status; /* DWORD 0 */
- u8 ipc_ue_status; /* DWORD 0 */
- u8 rsvd0[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_HI_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Unrecoverable Error Mask (Low) Register. Each bit, when set to one,
- * will mask the associated Unrecoverable Error status bit from notification
- * of Unrecoverable Error to the host CPU and/or Server Managment chip and the
- * transitioning of all BladeEngine units to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP {
- u8 cev_ue_mask; /* DWORD 0 */
- u8 ctx_ue_mask; /* DWORD 0 */
- u8 dbuf_ue_mask; /* DWORD 0 */
- u8 erx_ue_mask; /* DWORD 0 */
- u8 host_ue_mask; /* DWORD 0 */
- u8 mpu_ue_mask; /* DWORD 0 */
- u8 ndma_ue_mask; /* DWORD 0 */
- u8 ptc_ue_mask; /* DWORD 0 */
- u8 rdma_ue_mask; /* DWORD 0 */
- u8 rxf_ue_mask; /* DWORD 0 */
- u8 rxips_ue_mask; /* DWORD 0 */
- u8 rxulp0_ue_mask; /* DWORD 0 */
- u8 rxulp1_ue_mask; /* DWORD 0 */
- u8 rxulp2_ue_mask; /* DWORD 0 */
- u8 tim_ue_mask; /* DWORD 0 */
- u8 tpost_ue_mask; /* DWORD 0 */
- u8 tpre_ue_mask; /* DWORD 0 */
- u8 txips_ue_mask; /* DWORD 0 */
- u8 txulp0_ue_mask; /* DWORD 0 */
- u8 txulp1_ue_mask; /* DWORD 0 */
- u8 uc_ue_mask; /* DWORD 0 */
- u8 wdma_ue_mask; /* DWORD 0 */
- u8 txulp2_ue_mask; /* DWORD 0 */
- u8 host1_ue_mask; /* DWORD 0 */
- u8 p0_ob_link_ue_mask; /* DWORD 0 */
- u8 p1_ob_link_ue_mask; /* DWORD 0 */
- u8 host_gpio_ue_mask; /* DWORD 0 */
- u8 mbox_netw_ue_mask; /* DWORD 0 */
- u8 mbox_stor_ue_mask; /* DWORD 0 */
- u8 axgmac0_ue_mask; /* DWORD 0 */
- u8 axgmac1_ue_mask; /* DWORD 0 */
- u8 mpu_intpend_ue_mask; /* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Unrecoverable Error Mask (High) Register. Each bit, when set to one,
- * will mask the associated Unrecoverable Error status bit from notification
- * of Unrecoverable Error to the host CPU and/or Server Managment chip and the
- * transitioning of all BladeEngine units to an Offline state.
- */
-struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP {
- u8 jtag_ue_mask; /* DWORD 0 */
- u8 lpcmemhost_ue_mask; /* DWORD 0 */
- u8 mgmt_mac_ue_mask; /* DWORD 0 */
- u8 mpu_iram_ue_mask; /* DWORD 0 */
- u8 pcs0online_ue_mask; /* DWORD 0 */
- u8 pcs1online_ue_mask; /* DWORD 0 */
- u8 pctl0_ue_mask; /* DWORD 0 */
- u8 pctl1_ue_mask; /* DWORD 0 */
- u8 pmem_ue_mask; /* DWORD 0 */
- u8 rr_ue_mask; /* DWORD 0 */
- u8 rxpp_ue_mask; /* DWORD 0 */
- u8 txpb_ue_mask; /* DWORD 0 */
- u8 txp_ue_mask; /* DWORD 0 */
- u8 xaui_ue_mask; /* DWORD 0 */
- u8 arm_ue_mask; /* DWORD 0 */
- u8 ipc_ue_mask; /* DWORD 0 */
- u8 rsvd0[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_UE_STATUS_HI_MASK_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Online Control Register 0. This register controls various units within
- * BladeEngine being in an Online or Offline state.
- */
-struct BE_PCICFG_ONLINE0_CSR_AMAP {
- u8 cev_online; /* DWORD 0 */
- u8 ctx_online; /* DWORD 0 */
- u8 dbuf_online; /* DWORD 0 */
- u8 erx_online; /* DWORD 0 */
- u8 host_online; /* DWORD 0 */
- u8 mpu_online; /* DWORD 0 */
- u8 ndma_online; /* DWORD 0 */
- u8 ptc_online; /* DWORD 0 */
- u8 rdma_online; /* DWORD 0 */
- u8 rxf_online; /* DWORD 0 */
- u8 rxips_online; /* DWORD 0 */
- u8 rxulp0_online; /* DWORD 0 */
- u8 rxulp1_online; /* DWORD 0 */
- u8 rxulp2_online; /* DWORD 0 */
- u8 tim_online; /* DWORD 0 */
- u8 tpost_online; /* DWORD 0 */
- u8 tpre_online; /* DWORD 0 */
- u8 txips_online; /* DWORD 0 */
- u8 txulp0_online; /* DWORD 0 */
- u8 txulp1_online; /* DWORD 0 */
- u8 uc_online; /* DWORD 0 */
- u8 wdma_online; /* DWORD 0 */
- u8 txulp2_online; /* DWORD 0 */
- u8 host1_online; /* DWORD 0 */
- u8 p0_ob_link_online; /* DWORD 0 */
- u8 p1_ob_link_online; /* DWORD 0 */
- u8 host_gpio_online; /* DWORD 0 */
- u8 mbox_netw_online; /* DWORD 0 */
- u8 mbox_stor_online; /* DWORD 0 */
- u8 axgmac0_online; /* DWORD 0 */
- u8 axgmac1_online; /* DWORD 0 */
- u8 mpu_intpend_online; /* DWORD 0 */
-} __packed;
-struct PCICFG_ONLINE0_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Online Control Register 1. This register controls various units within
- * BladeEngine being in an Online or Offline state.
- */
-struct BE_PCICFG_ONLINE1_CSR_AMAP {
- u8 jtag_online; /* DWORD 0 */
- u8 lpcmemhost_online; /* DWORD 0 */
- u8 mgmt_mac_online; /* DWORD 0 */
- u8 mpu_iram_online; /* DWORD 0 */
- u8 pcs0online_online; /* DWORD 0 */
- u8 pcs1online_online; /* DWORD 0 */
- u8 pctl0_online; /* DWORD 0 */
- u8 pctl1_online; /* DWORD 0 */
- u8 pmem_online; /* DWORD 0 */
- u8 rr_online; /* DWORD 0 */
- u8 rxpp_online; /* DWORD 0 */
- u8 txpb_online; /* DWORD 0 */
- u8 txp_online; /* DWORD 0 */
- u8 xaui_online; /* DWORD 0 */
- u8 arm_online; /* DWORD 0 */
- u8 ipc_online; /* DWORD 0 */
- u8 rsvd0[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ONLINE1_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Host Timer Register. */
-struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP {
- u8 hosttimer[24]; /* DWORD 0 */
- u8 hostintr; /* DWORD 0 */
- u8 rsvd0[7]; /* DWORD 0 */
-} __packed;
-struct PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP {
- u32 dw[1];
-};
-
-/* Scratchpad Register (for software use). */
-struct BE_PCICFG_SCRATCHPAD_CSR_AMAP {
- u8 scratchpad[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_SCRATCHPAD_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express Capabilities Register. */
-struct BE_PCICFG_PCIE_CAP_CSR_AMAP {
- u8 capid[8]; /* DWORD 0 */
- u8 nextcap[8]; /* DWORD 0 */
- u8 capver[4]; /* DWORD 0 */
- u8 devport[4]; /* DWORD 0 */
- u8 rsvd0[6]; /* DWORD 0 */
- u8 rsvd1[2]; /* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_CAP_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express Device Capabilities Register. */
-struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP {
- u8 payload[3]; /* DWORD 0 */
- u8 rsvd0[3]; /* DWORD 0 */
- u8 lo_lat[3]; /* DWORD 0 */
- u8 l1_lat[3]; /* DWORD 0 */
- u8 rsvd1[3]; /* DWORD 0 */
- u8 rsvd2[3]; /* DWORD 0 */
- u8 pwr_value[8]; /* DWORD 0 */
- u8 pwr_scale[2]; /* DWORD 0 */
- u8 rsvd3[4]; /* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_DEVCAP_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express Device Control/Status Registers. */
-struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP {
- u8 CorrErrReportEn; /* DWORD 0 */
- u8 NonFatalErrReportEn; /* DWORD 0 */
- u8 FatalErrReportEn; /* DWORD 0 */
- u8 UnsuppReqReportEn; /* DWORD 0 */
- u8 EnableRelaxOrder; /* DWORD 0 */
- u8 Max_Payload_Size[3]; /* DWORD 0 */
- u8 ExtendTagFieldEnable; /* DWORD 0 */
- u8 PhantomFnEnable; /* DWORD 0 */
- u8 AuxPwrPMEnable; /* DWORD 0 */
- u8 EnableNoSnoop; /* DWORD 0 */
- u8 Max_Read_Req_Size[3]; /* DWORD 0 */
- u8 rsvd0; /* DWORD 0 */
- u8 CorrErrDetect; /* DWORD 0 */
- u8 NonFatalErrDetect; /* DWORD 0 */
- u8 FatalErrDetect; /* DWORD 0 */
- u8 UnsuppReqDetect; /* DWORD 0 */
- u8 AuxPwrDetect; /* DWORD 0 */
- u8 TransPending; /* DWORD 0 */
- u8 rsvd1[10]; /* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express Link Capabilities Register. */
-struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP {
- u8 MaxLinkSpeed[4]; /* DWORD 0 */
- u8 MaxLinkWidth[6]; /* DWORD 0 */
- u8 ASPMSupport[2]; /* DWORD 0 */
- u8 L0sExitLat[3]; /* DWORD 0 */
- u8 L1ExitLat[3]; /* DWORD 0 */
- u8 rsvd0[6]; /* DWORD 0 */
- u8 PortNum[8]; /* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_LINK_CAP_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express Link Status Register. */
-struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP {
- u8 ASPMCtl[2]; /* DWORD 0 */
- u8 rsvd0; /* DWORD 0 */
- u8 ReadCmplBndry; /* DWORD 0 */
- u8 LinkDisable; /* DWORD 0 */
- u8 RetrainLink; /* DWORD 0 */
- u8 CommonClkConfig; /* DWORD 0 */
- u8 ExtendSync; /* DWORD 0 */
- u8 rsvd1[8]; /* DWORD 0 */
- u8 LinkSpeed[4]; /* DWORD 0 */
- u8 NegLinkWidth[6]; /* DWORD 0 */
- u8 LinkTrainErr; /* DWORD 0 */
- u8 LinkTrain; /* DWORD 0 */
- u8 SlotClkConfig; /* DWORD 0 */
- u8 rsvd2[3]; /* DWORD 0 */
-} __packed;
-struct PCICFG_PCIE_LINK_STATUS_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express MSI Configuration Register. */
-struct BE_PCICFG_MSI_CSR_AMAP {
- u8 capid[8]; /* DWORD 0 */
- u8 nextptr[8]; /* DWORD 0 */
- u8 tablesize[11]; /* DWORD 0 */
- u8 rsvd0[3]; /* DWORD 0 */
- u8 funcmask; /* DWORD 0 */
- u8 en; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSI_CSR_AMAP {
- u32 dw[1];
-};
-
-/* MSI-X Table Offset Register. */
-struct BE_PCICFG_MSIX_TABLE_CSR_AMAP {
- u8 tablebir[3]; /* DWORD 0 */
- u8 offset[29]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_TABLE_CSR_AMAP {
- u32 dw[1];
-};
-
-/* MSI-X PBA Offset Register. */
-struct BE_PCICFG_MSIX_PBA_CSR_AMAP {
- u8 pbabir[3]; /* DWORD 0 */
- u8 offset[29]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_PBA_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Vector Control Register. */
-struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP {
- u8 vector_control; /* DWORD 0 */
- u8 rsvd0[31]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Data Register. */
-struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP {
- u8 data[16]; /* DWORD 0 */
- u8 rsvd0[16]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_MSG_DATA_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Address Register - High Part. */
-struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP {
- u8 addr[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP {
- u32 dw[1];
-};
-
-/* PCI Express MSI-X Message Address Register - Low Part. */
-struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP {
- u8 rsvd0[2]; /* DWORD 0 */
- u8 addr[30]; /* DWORD 0 */
-} __packed;
-struct PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP {
- u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_18_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_18_RSVD_AMAP {
- u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_19_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_19_RSVD_AMAP {
- u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_20_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[25][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_20_RSVD_AMAP {
- u32 dw[26];
-};
-
-struct BE_PCICFG_ANON_21_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[1919][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_21_RSVD_AMAP {
- u32 dw[1920];
-};
-
-struct BE_PCICFG_ANON_22_MESSAGE_AMAP {
- struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP vec_ctrl;
- struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP msg_data;
- struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP addr_hi;
- struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP addr_low;
-} __packed;
-struct PCICFG_ANON_22_MESSAGE_AMAP {
- u32 dw[4];
-};
-
-struct BE_PCICFG_ANON_23_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[895][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_23_RSVD_AMAP {
- u32 dw[896];
-};
-
-/* These PCI Configuration Space registers are for the Storage Function of
- * BladeEngine (Function 0). In the memory map of the registers below their
- * table,
- */
-struct BE_PCICFG0_CSRMAP_AMAP {
- struct BE_PCICFG_ID_CSR_AMAP id;
- u8 rsvd0[32]; /* DWORD 1 */
- u8 rsvd1[32]; /* DWORD 2 */
- u8 rsvd2[32]; /* DWORD 3 */
- struct BE_PCICFG_IOBAR_CSR_AMAP iobar;
- struct BE_PCICFG_MEMBAR0_CSR_AMAP membar0;
- struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP membar1_lo;
- struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP membar1_hi;
- struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP membar2_lo;
- struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP membar2_hi;
- u8 rsvd3[32]; /* DWORD 10 */
- struct BE_PCICFG_SUBSYSTEM_ID_F0_CSR_AMAP subsystem_id;
- u8 rsvd4[32]; /* DWORD 12 */
- u8 rsvd5[32]; /* DWORD 13 */
- u8 rsvd6[32]; /* DWORD 14 */
- u8 rsvd7[32]; /* DWORD 15 */
- struct BE_PCICFG_SEMAPHORE_CSR_AMAP semaphore[4];
- struct BE_PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
- u8 rsvd8[32]; /* DWORD 21 */
- struct BE_PCICFG_SCRATCHPAD_CSR_AMAP scratchpad;
- u8 rsvd9[32]; /* DWORD 23 */
- u8 rsvd10[32]; /* DWORD 24 */
- u8 rsvd11[32]; /* DWORD 25 */
- u8 rsvd12[32]; /* DWORD 26 */
- u8 rsvd13[32]; /* DWORD 27 */
- u8 rsvd14[2][32]; /* DWORD 28 */
- u8 rsvd15[32]; /* DWORD 30 */
- u8 rsvd16[32]; /* DWORD 31 */
- u8 rsvd17[8][32]; /* DWORD 32 */
- struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP ue_status_low;
- struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP ue_status_hi;
- struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP ue_status_low_mask;
- struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP ue_status_hi_mask;
- struct BE_PCICFG_ONLINE0_CSR_AMAP online0;
- struct BE_PCICFG_ONLINE1_CSR_AMAP online1;
- u8 rsvd18[32]; /* DWORD 46 */
- u8 rsvd19[32]; /* DWORD 47 */
- u8 rsvd20[32]; /* DWORD 48 */
- u8 rsvd21[32]; /* DWORD 49 */
- struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP host_timer_int_ctrl;
- u8 rsvd22[32]; /* DWORD 51 */
- struct BE_PCICFG_PCIE_CAP_CSR_AMAP pcie_cap;
- struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP pcie_devcap;
- struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP pcie_control_status;
- struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP pcie_link_cap;
- struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP pcie_link_status;
- struct BE_PCICFG_MSI_CSR_AMAP msi;
- struct BE_PCICFG_MSIX_TABLE_CSR_AMAP msix_table_offset;
- struct BE_PCICFG_MSIX_PBA_CSR_AMAP msix_pba_offset;
- u8 rsvd23[32]; /* DWORD 60 */
- u8 rsvd24[32]; /* DWORD 61 */
- u8 rsvd25[32]; /* DWORD 62 */
- u8 rsvd26[32]; /* DWORD 63 */
- u8 rsvd27[32]; /* DWORD 64 */
- u8 rsvd28[32]; /* DWORD 65 */
- u8 rsvd29[32]; /* DWORD 66 */
- u8 rsvd30[32]; /* DWORD 67 */
- u8 rsvd31[32]; /* DWORD 68 */
- u8 rsvd32[32]; /* DWORD 69 */
- u8 rsvd33[32]; /* DWORD 70 */
- u8 rsvd34[32]; /* DWORD 71 */
- u8 rsvd35[32]; /* DWORD 72 */
- u8 rsvd36[32]; /* DWORD 73 */
- u8 rsvd37[32]; /* DWORD 74 */
- u8 rsvd38[32]; /* DWORD 75 */
- u8 rsvd39[32]; /* DWORD 76 */
- u8 rsvd40[32]; /* DWORD 77 */
- u8 rsvd41[32]; /* DWORD 78 */
- u8 rsvd42[32]; /* DWORD 79 */
- u8 rsvd43[32]; /* DWORD 80 */
- u8 rsvd44[32]; /* DWORD 81 */
- u8 rsvd45[32]; /* DWORD 82 */
- u8 rsvd46[32]; /* DWORD 83 */
- u8 rsvd47[32]; /* DWORD 84 */
- u8 rsvd48[32]; /* DWORD 85 */
- u8 rsvd49[32]; /* DWORD 86 */
- u8 rsvd50[32]; /* DWORD 87 */
- u8 rsvd51[32]; /* DWORD 88 */
- u8 rsvd52[32]; /* DWORD 89 */
- u8 rsvd53[32]; /* DWORD 90 */
- u8 rsvd54[32]; /* DWORD 91 */
- u8 rsvd55[32]; /* DWORD 92 */
- u8 rsvd56[832]; /* DWORD 93 */
- u8 rsvd57[32]; /* DWORD 119 */
- u8 rsvd58[32]; /* DWORD 120 */
- u8 rsvd59[32]; /* DWORD 121 */
- u8 rsvd60[32]; /* DWORD 122 */
- u8 rsvd61[32]; /* DWORD 123 */
- u8 rsvd62[32]; /* DWORD 124 */
- u8 rsvd63[32]; /* DWORD 125 */
- u8 rsvd64[32]; /* DWORD 126 */
- u8 rsvd65[32]; /* DWORD 127 */
- u8 rsvd66[61440]; /* DWORD 128 */
- struct BE_PCICFG_ANON_22_MESSAGE_AMAP message[32];
- u8 rsvd67[28672]; /* DWORD 2176 */
- u8 rsvd68[32]; /* DWORD 3072 */
- u8 rsvd69[1023][32]; /* DWORD 3073 */
-} __packed;
-struct PCICFG0_CSRMAP_AMAP {
- u32 dw[4096];
-};
-
-struct BE_PCICFG_ANON_24_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_24_RSVD_AMAP {
- u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_25_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_25_RSVD_AMAP {
- u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_26_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
-} __packed;
-struct PCICFG_ANON_26_RSVD_AMAP {
- u32 dw[1];
-};
-
-struct BE_PCICFG_ANON_27_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_27_RSVD_AMAP {
- u32 dw[2];
-};
-
-struct BE_PCICFG_ANON_28_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[3][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_28_RSVD_AMAP {
- u32 dw[4];
-};
-
-struct BE_PCICFG_ANON_29_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[36][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_29_RSVD_AMAP {
- u32 dw[37];
-};
-
-struct BE_PCICFG_ANON_30_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[1930][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_30_RSVD_AMAP {
- u32 dw[1931];
-};
-
-struct BE_PCICFG_ANON_31_MESSAGE_AMAP {
- struct BE_PCICFG_MSIX_VECTOR_CONTROL_CSR_AMAP vec_ctrl;
- struct BE_PCICFG_MSIX_MSG_DATA_CSR_AMAP msg_data;
- struct BE_PCICFG_MSIX_MSG_ADDR_HI_CSR_AMAP addr_hi;
- struct BE_PCICFG_MSIX_MSG_ADDR_LO_CSR_AMAP addr_low;
-} __packed;
-struct PCICFG_ANON_31_MESSAGE_AMAP {
- u32 dw[4];
-};
-
-struct BE_PCICFG_ANON_32_RSVD_AMAP {
- u8 rsvd0[32]; /* DWORD 0 */
- u8 rsvd1[895][32]; /* DWORD 1 */
-} __packed;
-struct PCICFG_ANON_32_RSVD_AMAP {
- u32 dw[896];
-};
-
-/* This PCI configuration space register map is for the Networking Function of
- * BladeEngine (Function 1).
- */
-struct BE_PCICFG1_CSRMAP_AMAP {
- struct BE_PCICFG_ID_CSR_AMAP id;
- u8 rsvd0[32]; /* DWORD 1 */
- u8 rsvd1[32]; /* DWORD 2 */
- u8 rsvd2[32]; /* DWORD 3 */
- struct BE_PCICFG_IOBAR_CSR_AMAP iobar;
- struct BE_PCICFG_MEMBAR0_CSR_AMAP membar0;
- struct BE_PCICFG_MEMBAR1_LO_CSR_AMAP membar1_lo;
- struct BE_PCICFG_MEMBAR1_HI_CSR_AMAP membar1_hi;
- struct BE_PCICFG_MEMBAR2_LO_CSR_AMAP membar2_lo;
- struct BE_PCICFG_MEMBAR2_HI_CSR_AMAP membar2_hi;
- u8 rsvd3[32]; /* DWORD 10 */
- struct BE_PCICFG_SUBSYSTEM_ID_F1_CSR_AMAP subsystem_id;
- u8 rsvd4[32]; /* DWORD 12 */
- u8 rsvd5[32]; /* DWORD 13 */
- u8 rsvd6[32]; /* DWORD 14 */
- u8 rsvd7[32]; /* DWORD 15 */
- struct BE_PCICFG_SEMAPHORE_CSR_AMAP semaphore[4];
- struct BE_PCICFG_SOFT_RESET_CSR_AMAP soft_reset;
- u8 rsvd8[32]; /* DWORD 21 */
- struct BE_PCICFG_SCRATCHPAD_CSR_AMAP scratchpad;
- u8 rsvd9[32]; /* DWORD 23 */
- u8 rsvd10[32]; /* DWORD 24 */
- u8 rsvd11[32]; /* DWORD 25 */
- u8 rsvd12[32]; /* DWORD 26 */
- u8 rsvd13[32]; /* DWORD 27 */
- u8 rsvd14[2][32]; /* DWORD 28 */
- u8 rsvd15[32]; /* DWORD 30 */
- u8 rsvd16[32]; /* DWORD 31 */
- u8 rsvd17[8][32]; /* DWORD 32 */
- struct BE_PCICFG_UE_STATUS_LOW_CSR_AMAP ue_status_low;
- struct BE_PCICFG_UE_STATUS_HI_CSR_AMAP ue_status_hi;
- struct BE_PCICFG_UE_STATUS_LOW_MASK_CSR_AMAP ue_status_low_mask;
- struct BE_PCICFG_UE_STATUS_HI_MASK_CSR_AMAP ue_status_hi_mask;
- struct BE_PCICFG_ONLINE0_CSR_AMAP online0;
- struct BE_PCICFG_ONLINE1_CSR_AMAP online1;
- u8 rsvd18[32]; /* DWORD 46 */
- u8 rsvd19[32]; /* DWORD 47 */
- u8 rsvd20[32]; /* DWORD 48 */
- u8 rsvd21[32]; /* DWORD 49 */
- struct BE_PCICFG_HOST_TIMER_INT_CTRL_CSR_AMAP host_timer_int_ctrl;
- u8 rsvd22[32]; /* DWORD 51 */
- struct BE_PCICFG_PCIE_CAP_CSR_AMAP pcie_cap;
- struct BE_PCICFG_PCIE_DEVCAP_CSR_AMAP pcie_devcap;
- struct BE_PCICFG_PCIE_CONTROL_STATUS_CSR_AMAP pcie_control_status;
- struct BE_PCICFG_PCIE_LINK_CAP_CSR_AMAP pcie_link_cap;
- struct BE_PCICFG_PCIE_LINK_STATUS_CSR_AMAP pcie_link_status;
- struct BE_PCICFG_MSI_CSR_AMAP msi;
- struct BE_PCICFG_MSIX_TABLE_CSR_AMAP msix_table_offset;
- struct BE_PCICFG_MSIX_PBA_CSR_AMAP msix_pba_offset;
- u8 rsvd23[64]; /* DWORD 60 */
- u8 rsvd24[32]; /* DWORD 62 */
- u8 rsvd25[32]; /* DWORD 63 */
- u8 rsvd26[32]; /* DWORD 64 */
- u8 rsvd27[32]; /* DWORD 65 */
- u8 rsvd28[32]; /* DWORD 66 */
- u8 rsvd29[32]; /* DWORD 67 */
- u8 rsvd30[32]; /* DWORD 68 */
- u8 rsvd31[32]; /* DWORD 69 */
- u8 rsvd32[32]; /* DWORD 70 */
- u8 rsvd33[32]; /* DWORD 71 */
- u8 rsvd34[32]; /* DWORD 72 */
- u8 rsvd35[32]; /* DWORD 73 */
- u8 rsvd36[32]; /* DWORD 74 */
- u8 rsvd37[128]; /* DWORD 75 */
- u8 rsvd38[32]; /* DWORD 79 */
- u8 rsvd39[1184]; /* DWORD 80 */
- u8 rsvd40[61792]; /* DWORD 117 */
- struct BE_PCICFG_ANON_31_MESSAGE_AMAP message[32];
- u8 rsvd41[28672]; /* DWORD 2176 */
- u8 rsvd42[32]; /* DWORD 3072 */
- u8 rsvd43[1023][32]; /* DWORD 3073 */
-} __packed;
-struct PCICFG1_CSRMAP_AMAP {
- u32 dw[4096];
-};
-
-#endif /* __pcicfg_amap_h__ */
diff --git a/drivers/staging/benet/post_codes.h b/drivers/staging/benet/post_codes.h
deleted file mode 100644
index 6d1621f..0000000
--- a/drivers/staging/benet/post_codes.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __post_codes_amap_h__
-#define __post_codes_amap_h__
-
-/* --- MGMT_HBA_POST_STAGE_ENUM --- */
-#define POST_STAGE_POWER_ON_RESET (0) /* State after a cold or warm boot. */
-#define POST_STAGE_AWAITING_HOST_RDY (1) /* ARM boot code awaiting a
- go-ahed from the host. */
-#define POST_STAGE_HOST_RDY (2) /* Host has given go-ahed to ARM. */
-#define POST_STAGE_BE_RESET (3) /* Host wants to reset chip, this is a chip
- workaround */
-#define POST_STAGE_SEEPROM_CS_START (256) /* SEEPROM checksum
- test start. */
-#define POST_STAGE_SEEPROM_CS_DONE (257) /* SEEPROM checksum test
- done. */
-#define POST_STAGE_DDR_CONFIG_START (512) /* DDR configuration start. */
-#define POST_STAGE_DDR_CONFIG_DONE (513) /* DDR configuration done. */
-#define POST_STAGE_DDR_CALIBRATE_START (768) /* DDR calibration start. */
-#define POST_STAGE_DDR_CALIBRATE_DONE (769) /* DDR calibration done. */
-#define POST_STAGE_DDR_TEST_START (1024) /* DDR memory test start. */
-#define POST_STAGE_DDR_TEST_DONE (1025) /* DDR memory test done. */
-#define POST_STAGE_REDBOOT_INIT_START (1536) /* Redboot starts execution. */
-#define POST_STAGE_REDBOOT_INIT_DONE (1537) /* Redboot done execution. */
-#define POST_STAGE_FW_IMAGE_LOAD_START (1792) /* Firmware image load to
- DDR start. */
-#define POST_STAGE_FW_IMAGE_LOAD_DONE (1793) /* Firmware image load
- to DDR done. */
-#define POST_STAGE_ARMFW_START (2048) /* ARMfw runtime code
- starts execution. */
-#define POST_STAGE_DHCP_QUERY_START (2304) /* DHCP server query start. */
-#define POST_STAGE_DHCP_QUERY_DONE (2305) /* DHCP server query done. */
-#define POST_STAGE_BOOT_TARGET_DISCOVERY_START (2560) /* Boot Target
- Discovery Start. */
-#define POST_STAGE_BOOT_TARGET_DISCOVERY_DONE (2561) /* Boot Target
- Discovery Done. */
-#define POST_STAGE_RC_OPTION_SET (2816) /* Remote configuration
- option is set in SEEPROM */
-#define POST_STAGE_SWITCH_LINK (2817) /* Wait for link up on switch */
-#define POST_STAGE_SEND_ICDS_MESSAGE (2818) /* Send the ICDS message
- to switch */
-#define POST_STAGE_PERFROM_TFTP (2819) /* Download xml using TFTP */
-#define POST_STAGE_PARSE_XML (2820) /* Parse XML file */
-#define POST_STAGE_DOWNLOAD_IMAGE (2821) /* Download IMAGE from
- TFTP server */
-#define POST_STAGE_FLASH_IMAGE (2822) /* Flash the IMAGE */
-#define POST_STAGE_RC_DONE (2823) /* Remote configuration
- complete */
-#define POST_STAGE_REBOOT_SYSTEM (2824) /* Upgrade IMAGE done,
- reboot required */
-#define POST_STAGE_MAC_ADDRESS (3072) /* MAC Address Check */
-#define POST_STAGE_ARMFW_READY (49152) /* ARMfw is done with POST
- and ready. */
-#define POST_STAGE_ARMFW_UE (61440) /* ARMfw has asserted an
- unrecoverable error. The
- lower 3 hex digits of the
- stage code identify the
- unique error code.
- */
-
-/* This structure defines the format of the MPU semaphore
- * register when used for POST.
- */
-struct BE_MGMT_HBA_POST_STATUS_STRUCT_AMAP {
- u8 stage[16]; /* DWORD 0 */
- u8 rsvd0[10]; /* DWORD 0 */
- u8 iscsi_driver_loaded; /* DWORD 0 */
- u8 option_rom_installed; /* DWORD 0 */
- u8 iscsi_ip_conflict; /* DWORD 0 */
- u8 iscsi_no_ip; /* DWORD 0 */
- u8 backup_fw; /* DWORD 0 */
- u8 error; /* DWORD 0 */
-} __packed;
-struct MGMT_HBA_POST_STATUS_STRUCT_AMAP {
- u32 dw[1];
-};
-
-/* --- MGMT_HBA_POST_DUMMY_BITS_ENUM --- */
-#define POST_BIT_ISCSI_LOADED (26)
-#define POST_BIT_OPTROM_INST (27)
-#define POST_BIT_BAD_IP_ADDR (28)
-#define POST_BIT_NO_IP_ADDR (29)
-#define POST_BIT_BACKUP_FW (30)
-#define POST_BIT_ERROR (31)
-
-/* --- MGMT_HBA_POST_DUMMY_VALUES_ENUM --- */
-#define POST_ISCSI_DRIVER_LOADED (67108864)
-#define POST_OPTROM_INSTALLED (134217728)
-#define POST_ISCSI_IP_ADDRESS_CONFLICT (268435456)
-#define POST_ISCSI_NO_IP_ADDRESS (536870912)
-#define POST_BACKUP_FW_LOADED (1073741824)
-#define POST_FATAL_ERROR (2147483648)
-
-#endif /* __post_codes_amap_h__ */
diff --git a/drivers/staging/benet/regmap.h b/drivers/staging/benet/regmap.h
deleted file mode 100644
index e816ba2..0000000
--- a/drivers/staging/benet/regmap.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2005 - 2008 ServerEngines
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation. The full GNU General
- * Public License is included in this distribution in the file called COPYING.
- *
- * Contact Information:
- * linux-drivers@serverengines.com
- *
- * ServerEngines
- * 209 N. Fair Oaks Ave
- * Sunnyvale, CA 94085
- */
-/*
- * Autogenerated by srcgen version: 0127
- */
-#ifndef __regmap_amap_h__
-#define __regmap_amap_h__
-#include "pcicfg.h"
-#include "ep.h"
-#include "cev.h"
-#include "mpu.h"
-#include "doorbells.h"
-
-/*
- * This is the control and status register map for BladeEngine, showing
- * the relative size and offset of each sub-module. The CSR registers
- * are identical for the network and storage PCI functions. The
- * CSR map is shown below, followed by details of each block,
- * in sub-sections. The sub-sections begin with a description
- * of CSRs that are instantiated in multiple blocks.
- */
-struct BE_BLADE_ENGINE_CSRMAP_AMAP {
- struct BE_MPU_CSRMAP_AMAP mpu;
- u8 rsvd0[8192]; /* DWORD 256 */
- u8 rsvd1[8192]; /* DWORD 512 */
- struct BE_CEV_CSRMAP_AMAP cev;
- u8 rsvd2[8192]; /* DWORD 1024 */
- u8 rsvd3[8192]; /* DWORD 1280 */
- u8 rsvd4[8192]; /* DWORD 1536 */
- u8 rsvd5[8192]; /* DWORD 1792 */
- u8 rsvd6[8192]; /* DWORD 2048 */
- u8 rsvd7[8192]; /* DWORD 2304 */
- u8 rsvd8[8192]; /* DWORD 2560 */
- u8 rsvd9[8192]; /* DWORD 2816 */
- u8 rsvd10[8192]; /* DWORD 3072 */
- u8 rsvd11[8192]; /* DWORD 3328 */
- u8 rsvd12[8192]; /* DWORD 3584 */
- u8 rsvd13[8192]; /* DWORD 3840 */
- u8 rsvd14[8192]; /* DWORD 4096 */
- u8 rsvd15[8192]; /* DWORD 4352 */
- u8 rsvd16[8192]; /* DWORD 4608 */
- u8 rsvd17[8192]; /* DWORD 4864 */
- u8 rsvd18[8192]; /* DWORD 5120 */
- u8 rsvd19[8192]; /* DWORD 5376 */
- u8 rsvd20[8192]; /* DWORD 5632 */
- u8 rsvd21[8192]; /* DWORD 5888 */
- u8 rsvd22[8192]; /* DWORD 6144 */
- u8 rsvd23[17152][32]; /* DWORD 6400 */
-} __packed;
-struct BLADE_ENGINE_CSRMAP_AMAP {
- u32 dw[23552];
-};
-
-#endif /* __regmap_amap_h__ */
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 5ed4ae0..6789089 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -485,7 +485,7 @@
usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
wbuflen, rbuflen);
ret = -ENOMEM;
- goto fail;
+ goto err;
}
mutex_lock(&instance->cm_serialize);
@@ -565,6 +565,7 @@
dbg("cm %#x", cm);
fail:
mutex_unlock(&instance->cm_serialize);
+err:
return ret;
}
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 0f5c05f..c40a9b2 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -50,6 +50,7 @@
static struct usb_device_id usbtmc_devices[] = {
{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
+ { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), },
{ 0, } /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, usbtmc_devices);
@@ -106,12 +107,13 @@
{
struct usb_interface *intf;
struct usbtmc_device_data *data;
- int retval = -ENODEV;
+ int retval = 0;
intf = usb_find_interface(&usbtmc_driver, iminor(inode));
if (!intf) {
printk(KERN_ERR KBUILD_MODNAME
": can not find device for minor %d", iminor(inode));
+ retval = -ENODEV;
goto exit;
}
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 7513bb0..6585f52 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -359,11 +359,6 @@
spin_lock_irqsave(&ps->lock, flags);
}
spin_unlock_irqrestore(&ps->lock, flags);
- as = async_getcompleted(ps);
- while (as) {
- free_async(as);
- as = async_getcompleted(ps);
- }
}
static void destroy_async_on_interface(struct dev_state *ps,
@@ -643,6 +638,7 @@
struct dev_state *ps = file->private_data;
struct usb_device *dev = ps->dev;
unsigned int ifnum;
+ struct async *as;
usb_lock_device(dev);
@@ -661,6 +657,12 @@
usb_unlock_device(dev);
usb_put_dev(dev);
put_pid(ps->disc_pid);
+
+ as = async_getcompleted(ps);
+ while (as) {
+ free_async(as);
+ as = async_getcompleted(ps);
+ }
kfree(ps);
return 0;
}
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3712b92..ecc9b66 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1095,7 +1095,8 @@
prev->qh_next = qh->qh_next;
wmb ();
- if (unlikely (ehci_to_hcd(ehci)->state == HC_STATE_HALT)) {
+ /* If the controller isn't running, we don't have to wait for it */
+ if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) {
/* if (unlikely (qh->reclaim != 0))
* this will recurse, probably not much
*/
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 07bcb93..1d0b49e 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1536,7 +1536,7 @@
struct ehci_itd, itd_list);
list_move_tail (&itd->itd_list, &stream->td_list);
itd->stream = iso_stream_get (stream);
- itd->urb = usb_get_urb (urb);
+ itd->urb = urb;
itd_init (ehci, stream, itd);
}
@@ -1645,7 +1645,7 @@
(void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
- if (unlikely (list_empty (&stream->td_list))) {
+ if (unlikely(list_is_singular(&stream->td_list))) {
ehci_to_hcd(ehci)->self.bandwidth_allocated
-= stream->bandwidth;
ehci_vdbg (ehci,
@@ -1656,7 +1656,6 @@
iso_stream_put (ehci, stream);
done:
- usb_put_urb(urb);
itd->urb = NULL;
if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
/* OK to recycle this ITD now. */
@@ -1949,7 +1948,7 @@
struct ehci_sitd, sitd_list);
list_move_tail (&sitd->sitd_list, &stream->td_list);
sitd->stream = iso_stream_get (stream);
- sitd->urb = usb_get_urb (urb);
+ sitd->urb = urb;
sitd_patch(ehci, stream, sitd, sched, packet);
sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size,
@@ -2034,7 +2033,7 @@
(void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
- if (list_empty (&stream->td_list)) {
+ if (list_is_singular(&stream->td_list)) {
ehci_to_hcd(ehci)->self.bandwidth_allocated
-= stream->bandwidth;
ehci_vdbg (ehci,
@@ -2045,7 +2044,6 @@
iso_stream_put (ehci, stream);
/* OK to recycle this SITD now that its completion callback ran. */
done:
- usb_put_urb(urb);
sitd->urb = NULL;
sitd->stream = NULL;
list_move(&sitd->sitd_list, &stream->free_list);
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index fb3055f..7cf74f8 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -28,8 +28,6 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
-
static struct clk *usb_host_clock;
static void ep93xx_start_hc(struct device *dev)
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 878c77c..972f20b 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -499,6 +499,7 @@
retval = usb_register_dev(intf, &mdc800_class);
if (retval) {
dev_err(&intf->dev, "Not able to get a minor for this device.\n");
+ mutex_unlock(&mdc800->io_lock);
return -ENODEV;
}
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 7b6922e..2035265 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -376,7 +376,7 @@
if (dev->open_count <= 0) {
dbg(1," %s : device not opened", __func__);
retval = -ENODEV;
- goto exit;
+ goto unlock;
}
adu_release_internal(dev);
@@ -385,9 +385,9 @@
if (!dev->open_count) /* ... and we're the last user */
adu_delete(dev);
}
-
-exit:
+unlock:
mutex_unlock(&adutux_mutex);
+exit:
dbg(2," %s : leave, return value %d", __func__, retval);
return retval;
}
diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c
index 63dff9b..f26ea8d 100644
--- a/drivers/usb/misc/vstusb.c
+++ b/drivers/usb/misc/vstusb.c
@@ -401,6 +401,7 @@
}
if (copy_from_user(buf, buffer, count)) {
+ mutex_unlock(&vstdev->lock);
dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__);
retval = -EFAULT;
goto exit;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 027f4b7..9b4082b 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -79,6 +79,7 @@
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f92f4d7..ae84c32 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -663,6 +663,11 @@
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
+ { USB_DEVICE(ATMEL_VID, STK541_PID) },
+ { USB_DEVICE(DE_VID, STB_PID) },
+ { USB_DEVICE(DE_VID, WHT_PID) },
+ { USB_DEVICE(ADI_VID, ADI_GNICE_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index e300c84..daaf63d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -893,6 +893,26 @@
#define DIEBOLD_BCS_SE923_PID 0xfb99
/*
+ * Atmel STK541
+ */
+#define ATMEL_VID 0x03eb /* Vendor ID */
+#define STK541_PID 0x2109 /* Zigbee Controller */
+
+/*
+ * Dresden Elektronic Sensor Terminal Board
+ */
+#define DE_VID 0x1cf1 /* Vendor ID */
+#define STB_PID 0x0001 /* Sensor Terminal Board */
+#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
+
+/*
+ * Blackfin gnICE JTAG
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
+ */
+#define ADI_VID 0x0456
+#define ADI_GNICE_PID 0xF000
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index b7c132b..61ebddc4 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -89,6 +89,7 @@
#define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041
#define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061
#define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100
+#define OPTION_PRODUCT_GTM380_MODEM 0x7201
#define HUAWEI_VENDOR_ID 0x12D1
#define HUAWEI_PRODUCT_E600 0x1001
@@ -197,6 +198,7 @@
/* OVATION PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
+#define NOVATELWIRELESS_PRODUCT_U727 0x5010
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000
@@ -288,15 +290,11 @@
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
+#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
-/* Ericsson products */
-#define ERICSSON_VENDOR_ID 0x0bdb
-#define ERICSSON_PRODUCT_F3507G_1 0x1900
-#define ERICSSON_PRODUCT_F3507G_2 0x1902
-
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -325,6 +323,7 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTM380_MODEM) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
@@ -415,6 +414,7 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
@@ -442,7 +442,6 @@
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) }, /* Dell Wireless HSDPA 5520 */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
- { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
@@ -510,11 +509,10 @@
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
- { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
- { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6f59c8e..cfde74a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -226,7 +226,7 @@
US_FL_MAX_SECTORS_64 ),
/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
-UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999,
"Nokia",
"Nokia 6233",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -951,7 +951,9 @@
US_FL_FIX_CAPACITY ),
/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
-UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
+/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by
+ * Thomas Bartosik <tbartdev@gmx-topmail.de> */
+UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100,
"Prolific Technology Inc.",
"Mass Storage Device",
US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1390,6 +1392,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
0 ),
+/* Reported by Jan Dumon <j.dumon@option.com>
+ * This device (wrongly) has a vendor-specific device descriptor.
+ * The entry is needed so usb-storage can bind to it's mass-storage
+ * interface as an interface driver */
+UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000,
+ "Option",
+ "GI 0431 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000,
"Seagate",
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 238a96a..613a5fc 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -921,8 +921,10 @@
result = -ENODEV;
/* FIXME: segmentation broken -- kills DWA */
mutex_lock(&wusbhc->mutex); /* get a WUSB dev */
- if (urb->dev == NULL)
+ if (urb->dev == NULL) {
+ mutex_unlock(&wusbhc->mutex);
goto error_dev_gone;
+ }
wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
if (wusb_dev == NULL) {
mutex_unlock(&wusbhc->mutex);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index fb19803..41c27a4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && ARM && ARCH_IMX
+ depends on FB && (ARCH_IMX || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2120,16 +2120,30 @@
the bootloader.
config FB_MX3
- tristate "MX3 Framebuffer support"
- depends on FB && MX3_IPU
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- default y
- help
- This is a framebuffer device for the i.MX31 LCD Controller. So
- far only synchronous displays are supported. If you plan to use
- an LCD display with your i.MX31 system, say Y here.
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+ tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Broadsheet
+ controller. The release name for this device was Epson S1D13521
+ and could also have been called by other names when coupled with
+ a bridge adapter.
source "drivers/video/omap/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 2a998ca..bb265ec 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -106,6 +106,7 @@
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
@@ -132,7 +133,7 @@
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_MX3) += mx3fb.o
+obj-$(CONFIG_FB_MX3) += mx3fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c
index 61c3d3f..6995fe1 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/acornfb.c
@@ -28,9 +28,9 @@
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/pgtable.h>
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 2181ce4..35e8eb0 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1853,13 +1853,14 @@
* Initialisation
*/
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
static void aty128_early_resume(void *data)
{
struct aty128fb_par *par = data;
if (try_acquire_console_sem())
return;
+ pci_restore_state(par->pdev);
aty128_do_resume(par->pdev);
release_console_sem();
}
@@ -1907,7 +1908,14 @@
/* Indicate sleep capability */
if (par->chip_gen == rage_M3) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
}
/* Find default mode */
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index ca5f0dc..c6d7cc7 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2507,6 +2507,25 @@
#endif /* CONFIG_PPC_OF */
+static void radeonfb_whack_power_state(struct radeonfb_info *rinfo, pci_power_t state)
+{
+ u16 pwr_cmd;
+
+ for (;;) {
+ pci_read_config_word(rinfo->pdev,
+ rinfo->pm_reg+PCI_PM_CTRL,
+ &pwr_cmd);
+ if (pwr_cmd & 2)
+ break;
+ pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2;
+ pci_write_config_word(rinfo->pdev,
+ rinfo->pm_reg+PCI_PM_CTRL,
+ pwr_cmd);
+ msleep(500);
+ }
+ rinfo->pdev->current_state = state;
+}
+
static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
{
u32 tmp;
@@ -2558,6 +2577,11 @@
/* Switch PCI power management to D2. */
pci_disable_device(rinfo->pdev);
pci_save_state(rinfo->pdev);
+ /* The chip seems to need us to whack the PM register
+ * repeatedly until it sticks. We do that -prior- to
+ * calling pci_set_power_state()
+ */
+ radeonfb_whack_power_state(rinfo, PCI_D2);
pci_set_power_state(rinfo->pdev, PCI_D2);
} else {
printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
@@ -2762,12 +2786,13 @@
return rc;
}
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_OF__disabled
static void radeonfb_early_resume(void *data)
{
struct radeonfb_info *rinfo = data;
rinfo->no_schedule = 1;
+ pci_restore_state(rinfo->pdev);
radeonfb_pci_resume(rinfo->pdev);
rinfo->no_schedule = 0;
}
@@ -2834,7 +2859,14 @@
*/
if (rinfo->pm_mode != radeon_pm_none) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+#endif
}
#if 0
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
new file mode 100644
index 0000000..509cb92
--- /dev/null
+++ b/drivers/video/broadsheetfb.c
@@ -0,0 +1,568 @@
+/*
+ * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This driver is written to be used with the Broadsheet display controller.
+ *
+ * It is intended to be architecture independent. A board specific driver
+ * must be used to perform all the physical IO interactions.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+
+#include <video/broadsheetfb.h>
+
+/* Display specific information */
+#define DPY_W 800
+#define DPY_H 600
+
+static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = {
+ .id = "broadsheetfb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_STATIC_PSEUDOCOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = DPY_W,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo broadsheetfb_var __devinitdata = {
+ .xres = DPY_W,
+ .yres = DPY_H,
+ .xres_virtual = DPY_W,
+ .yres_virtual = DPY_H,
+ .bits_per_pixel = 8,
+ .grayscale = 1,
+ .red = { 0, 4, 0 },
+ .green = { 0, 4, 0 },
+ .blue = { 0, 4, 0 },
+ .transp = { 0, 0, 0 },
+};
+
+/* main broadsheetfb functions */
+static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, BS_WR, 0);
+ par->board->set_hdb(par, data);
+ par->board->set_ctl(par, BS_WR, 1);
+}
+
+static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->set_ctl(par, BS_DC, 0);
+ broadsheet_issue_data(par, data);
+}
+
+static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data)
+{
+ par->board->wait_for_rdy(par);
+
+ par->board->set_ctl(par, BS_CS, 0);
+ broadsheet_issue_cmd(par, data);
+ par->board->set_ctl(par, BS_DC, 1);
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd,
+ int argc, u16 *argv)
+{
+ int i;
+
+ par->board->wait_for_rdy(par);
+
+ par->board->set_ctl(par, BS_CS, 0);
+ broadsheet_issue_cmd(par, cmd);
+ par->board->set_ctl(par, BS_DC, 1);
+
+ for (i = 0; i < argc; i++)
+ broadsheet_issue_data(par, argv[i]);
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static void broadsheet_burst_write(struct broadsheetfb_par *par, int size,
+ u16 *data)
+{
+ int i;
+ u16 tmp;
+
+ par->board->set_ctl(par, BS_CS, 0);
+ par->board->set_ctl(par, BS_DC, 1);
+
+ for (i = 0; i < size; i++) {
+ par->board->set_ctl(par, BS_WR, 0);
+ tmp = (data[i] & 0x0F) << 4;
+ tmp |= (data[i] & 0x0F00) << 4;
+ par->board->set_hdb(par, tmp);
+ par->board->set_ctl(par, BS_WR, 1);
+ }
+
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_get_data(struct broadsheetfb_par *par)
+{
+ u16 res;
+ /* wait for ready to go hi. (lo is busy) */
+ par->board->wait_for_rdy(par);
+
+ /* cs lo, dc lo for cmd, we lo for each data, db as usual */
+ par->board->set_ctl(par, BS_DC, 1);
+ par->board->set_ctl(par, BS_CS, 0);
+ par->board->set_ctl(par, BS_WR, 0);
+
+ res = par->board->get_hdb(par);
+
+ /* strobe wr */
+ par->board->set_ctl(par, BS_WR, 1);
+ par->board->set_ctl(par, BS_CS, 1);
+
+ return res;
+}
+
+static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg,
+ u16 data)
+{
+ /* wait for ready to go hi. (lo is busy) */
+ par->board->wait_for_rdy(par);
+
+ /* cs lo, dc lo for cmd, we lo for each data, db as usual */
+ par->board->set_ctl(par, BS_CS, 0);
+
+ broadsheet_issue_cmd(par, BS_CMD_WR_REG);
+
+ par->board->set_ctl(par, BS_DC, 1);
+
+ broadsheet_issue_data(par, reg);
+ broadsheet_issue_data(par, data);
+
+ par->board->set_ctl(par, BS_CS, 1);
+}
+
+static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg)
+{
+ broadsheet_send_command(par, reg);
+ msleep(100);
+ return broadsheet_get_data(par);
+}
+
+static void __devinit broadsheet_init_display(struct broadsheetfb_par *par)
+{
+ u16 args[5];
+
+ args[0] = DPY_W;
+ args[1] = DPY_H;
+ args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */
+ args[3] = 2; /* gdrv cfg */
+ args[4] = (4 | (1 << 7)); /* lut index format */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+ /* did the controller really set it? */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args);
+
+ args[0] = 4; /* fsync len */
+ args[1] = (10 << 8) | 4; /* fend/fbegin len */
+ args[2] = 10; /* line sync len */
+ args[3] = (100 << 8) | 4; /* line end/begin len */
+ args[4] = 6; /* pixel clock cfg */
+ broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args);
+
+ /* setup waveform */
+ args[0] = 0x886;
+ args[1] = 0;
+ broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args);
+
+ broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_write_reg(par, 0x330, 0x84);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ args[0] = (0x3 << 4);
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+ broadsheet_burst_write(par, DPY_W*DPY_H/2,
+ (u16 *) par->info->screen_base);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+}
+
+static void __devinit broadsheet_init(struct broadsheetfb_par *par)
+{
+ broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN);
+ /* the controller needs a second */
+ msleep(1000);
+ broadsheet_init_display(par);
+}
+
+static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par,
+ u16 y1, u16 y2)
+{
+ u16 args[5];
+ unsigned char *buf = (unsigned char *)par->info->screen_base;
+
+ /* y1 must be a multiple of 4 so drop the lower bits */
+ y1 &= 0xFFFC;
+ /* y2 must be a multiple of 4 , but - 1 so up the lower bits */
+ y2 |= 0x0003;
+
+ args[0] = 0x3 << 4;
+ args[1] = 0;
+ args[2] = y1;
+ args[3] = cpu_to_le16(par->info->var.xres);
+ args[4] = y2;
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+
+ buf += y1 * par->info->var.xres;
+ broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2,
+ (u16 *) buf);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+
+}
+
+static void broadsheetfb_dpy_update(struct broadsheetfb_par *par)
+{
+ u16 args[5];
+
+ args[0] = 0x3 << 4;
+ broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args);
+
+ args[0] = 0x154;
+ broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args);
+ broadsheet_burst_write(par, DPY_W*DPY_H/2,
+ (u16 *) par->info->screen_base);
+
+ broadsheet_send_command(par, BS_CMD_LD_IMG_END);
+
+ args[0] = 0x4300;
+ broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG);
+
+ broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND);
+
+ par->board->wait_for_rdy(par);
+
+}
+
+/* this is called back from the deferred io workqueue */
+static void broadsheetfb_dpy_deferred_io(struct fb_info *info,
+ struct list_head *pagelist)
+{
+ u16 y1 = 0, h = 0;
+ int prev_index = -1;
+ struct page *cur;
+ struct fb_deferred_io *fbdefio = info->fbdefio;
+ int h_inc;
+ u16 yres = info->var.yres;
+ u16 xres = info->var.xres;
+
+ /* height increment is fixed per page */
+ h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
+
+ /* walk the written page list and swizzle the data */
+ list_for_each_entry(cur, &fbdefio->pagelist, lru) {
+ if (prev_index < 0) {
+ /* just starting so assign first page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ } else if ((prev_index + 1) == cur->index) {
+ /* this page is consecutive so increase our height */
+ h += h_inc;
+ } else {
+ /* page not consecutive, issue previous update first */
+ broadsheetfb_dpy_update_pages(info->par, y1, y1 + h);
+ /* start over with our non consecutive page */
+ y1 = (cur->index << PAGE_SHIFT) / xres;
+ h = h_inc;
+ }
+ prev_index = cur->index;
+ }
+
+ /* if we still have any pages to update we do so now */
+ if (h >= yres) {
+ /* its a full screen update, just do it */
+ broadsheetfb_dpy_update(info->par);
+ } else {
+ broadsheetfb_dpy_update_pages(info->par, y1,
+ min((u16) (y1 + h), yres));
+ }
+}
+
+static void broadsheetfb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_fillrect(info, rect);
+
+ broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *area)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_copyarea(info, area);
+
+ broadsheetfb_dpy_update(par);
+}
+
+static void broadsheetfb_imageblit(struct fb_info *info,
+ const struct fb_image *image)
+{
+ struct broadsheetfb_par *par = info->par;
+
+ sys_imageblit(info, image);
+
+ broadsheetfb_dpy_update(par);
+}
+
+/*
+ * this is the slow path from userspace. they can seek and write to
+ * the fb. it's inefficient to do anything less than a full screen draw
+ */
+static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct broadsheetfb_par *par = info->par;
+ unsigned long p = *ppos;
+ void *dst;
+ int err = 0;
+ unsigned long total_size;
+
+ if (info->state != FBINFO_STATE_RUNNING)
+ return -EPERM;
+
+ total_size = info->fix.smem_len;
+
+ if (p > total_size)
+ return -EFBIG;
+
+ if (count > total_size) {
+ err = -EFBIG;
+ count = total_size;
+ }
+
+ if (count + p > total_size) {
+ if (!err)
+ err = -ENOSPC;
+
+ count = total_size - p;
+ }
+
+ dst = (void *)(info->screen_base + p);
+
+ if (copy_from_user(dst, buf, count))
+ err = -EFAULT;
+
+ if (!err)
+ *ppos += count;
+
+ broadsheetfb_dpy_update(par);
+
+ return (err) ? err : count;
+}
+
+static struct fb_ops broadsheetfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = broadsheetfb_write,
+ .fb_fillrect = broadsheetfb_fillrect,
+ .fb_copyarea = broadsheetfb_copyarea,
+ .fb_imageblit = broadsheetfb_imageblit,
+};
+
+static struct fb_deferred_io broadsheetfb_defio = {
+ .delay = HZ/4,
+ .deferred_io = broadsheetfb_dpy_deferred_io,
+};
+
+static int __devinit broadsheetfb_probe(struct platform_device *dev)
+{
+ struct fb_info *info;
+ struct broadsheet_board *board;
+ int retval = -ENOMEM;
+ int videomemorysize;
+ unsigned char *videomemory;
+ struct broadsheetfb_par *par;
+ int i;
+
+ /* pick up board specific routines */
+ board = dev->dev.platform_data;
+ if (!board)
+ return -EINVAL;
+
+ /* try to count device specific driver, if can't, platform recalls */
+ if (!try_module_get(board->owner))
+ return -ENODEV;
+
+ info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev);
+ if (!info)
+ goto err;
+
+ videomemorysize = (DPY_W*DPY_H);
+ videomemory = vmalloc(videomemorysize);
+ if (!videomemory)
+ goto err_fb_rel;
+
+ memset(videomemory, 0, videomemorysize);
+
+ info->screen_base = (char *)videomemory;
+ info->fbops = &broadsheetfb_ops;
+
+ info->var = broadsheetfb_var;
+ info->fix = broadsheetfb_fix;
+ info->fix.smem_len = videomemorysize;
+ par = info->par;
+ par->info = info;
+ par->board = board;
+ par->write_reg = broadsheet_write_reg;
+ par->read_reg = broadsheet_read_reg;
+ init_waitqueue_head(&par->waitq);
+
+ info->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fbdefio = &broadsheetfb_defio;
+ fb_deferred_io_init(info);
+
+ retval = fb_alloc_cmap(&info->cmap, 16, 0);
+ if (retval < 0) {
+ dev_err(&dev->dev, "Failed to allocate colormap\n");
+ goto err_vfree;
+ }
+
+ /* set cmap */
+ for (i = 0; i < 16; i++)
+ info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32;
+ memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16);
+ memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16);
+
+ retval = par->board->setup_irq(info);
+ if (retval < 0)
+ goto err_cmap;
+
+ /* this inits the dpy */
+ retval = board->init(par);
+ if (retval < 0)
+ goto err_free_irq;
+
+ broadsheet_init(par);
+
+ retval = register_framebuffer(info);
+ if (retval < 0)
+ goto err_free_irq;
+ platform_set_drvdata(dev, info);
+
+ printk(KERN_INFO
+ "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
+ info->node, videomemorysize >> 10);
+
+
+ return 0;
+
+err_free_irq:
+ board->cleanup(par);
+err_cmap:
+ fb_dealloc_cmap(&info->cmap);
+err_vfree:
+ vfree(videomemory);
+err_fb_rel:
+ framebuffer_release(info);
+err:
+ module_put(board->owner);
+ return retval;
+
+}
+
+static int __devexit broadsheetfb_remove(struct platform_device *dev)
+{
+ struct fb_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ struct broadsheetfb_par *par = info->par;
+ unregister_framebuffer(info);
+ fb_deferred_io_cleanup(info);
+ par->board->cleanup(par);
+ fb_dealloc_cmap(&info->cmap);
+ vfree((void *)info->screen_base);
+ module_put(par->board->owner);
+ framebuffer_release(info);
+ }
+ return 0;
+}
+
+static struct platform_driver broadsheetfb_driver = {
+ .probe = broadsheetfb_probe,
+ .remove = broadsheetfb_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "broadsheetfb",
+ },
+};
+
+static int __init broadsheetfb_init(void)
+{
+ return platform_driver_register(&broadsheetfb_driver);
+}
+
+static void __exit broadsheetfb_exit(void)
+{
+ platform_driver_unregister(&broadsheetfb_driver);
+}
+
+module_init(broadsheetfb_init);
+module_exit(broadsheetfb_exit);
+
+MODULE_DESCRIPTION("fbdev driver for Broadsheet controller");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 7a9e42e..83c5cef 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -46,8 +46,8 @@
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -1425,7 +1425,7 @@
#ifdef CONFIG_ARCH_SHARK
-#include <mach/hardware.h>
+#include <mach/framebuffer.h>
static int __devinit cyberpro_vl_probe(void)
{
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index a24e680..2e94019 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -993,6 +993,7 @@
struct i810fb_par *par = info->par;
int line_length, vidmem, mode_valid = 0, retval = 0;
u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+
/*
* Memory limit
*/
@@ -1002,12 +1003,12 @@
if (vidmem > par->fb.size) {
vyres = par->fb.size/line_length;
if (vyres < var->yres) {
- vyres = yres;
+ vyres = info->var.yres;
vxres = par->fb.size/vyres;
vxres /= var->bits_per_pixel >> 3;
line_length = get_line_length(par, vxres,
var->bits_per_pixel);
- vidmem = line_length * yres;
+ vidmem = line_length * info->var.yres;
if (vxres < var->xres) {
printk("i810fb: required video memory, "
"%d bytes, for %dx%d-%d (virtual) "
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index d58c68c..bd1cb75 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -14,7 +14,6 @@
* linux-arm-kernel@lists.arm.linux.org.uk
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -44,7 +43,12 @@
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
+
+#ifdef CONFIG_ARCH_MX1
#define SIZE_YMAX(y) ((y) & 0x1ff)
+#else
+#define SIZE_YMAX(y) ((y) & 0x3ff)
+#endif
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
@@ -54,7 +58,12 @@
#define CPOS_CC0 (1<<30)
#define CPOS_OP (1<<28)
#define CPOS_CXP(x) (((x) & 3ff) << 16)
+
+#ifdef CONFIG_ARCH_MX1
#define CPOS_CYP(y) ((y) & 0x1ff)
+#else
+#define CPOS_CYP(y) ((y) & 0x3ff)
+#endif
#define LCDC_LCWHB 0x10
#define LCWHB_BK_EN (1<<31)
@@ -63,9 +72,16 @@
#define LCWHB_BD(x) ((x) & 0xff)
#define LCDC_LCHCC 0x14
+
+#ifdef CONFIG_ARCH_MX1
#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+#else
+#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
+#endif
#define LCDC_PCR 0x18
@@ -92,7 +108,13 @@
/* bit fields in imxfb.h */
#define LCDC_RMCR 0x34
+
+#ifdef CONFIG_ARCH_MX1
#define RMCR_LCDC_EN (1<<1)
+#else
+#define RMCR_LCDC_EN 0
+#endif
+
#define RMCR_SELF_REF (1<<0)
#define LCDC_LCDICR 0x38
@@ -159,6 +181,17 @@
#define MIN_XRES 64
#define MIN_YRES 64
+/* Actually this really is 18bit support, the lowest 2 bits of each colour
+ * are unused in hardware. We claim to have 24bit support to make software
+ * like X work, which does not support 18bit.
+ */
+static struct imxfb_rgb def_rgb_18 = {
+ .red = {.offset = 16, .length = 8,},
+ .green = {.offset = 8, .length = 8,},
+ .blue = {.offset = 0, .length = 8,},
+ .transp = {.offset = 0, .length = 0,},
+};
+
static struct imxfb_rgb def_rgb_16_tft = {
.red = {.offset = 11, .length = 5,},
.green = {.offset = 5, .length = 6,},
@@ -286,6 +319,9 @@
pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
+ case 32:
+ rgb = &def_rgb_18;
+ break;
case 16:
default:
if (readl(fbi->regs + LCDC_PCR) & PCR_TFT)
@@ -327,9 +363,7 @@
struct imxfb_info *fbi = info->par;
struct fb_var_screeninfo *var = &info->var;
- pr_debug("set_par\n");
-
- if (var->bits_per_pixel == 16)
+ if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32)
info->fix.visual = FB_VISUAL_TRUECOLOR;
else if (!fbi->cmap_static)
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
@@ -354,10 +388,6 @@
{
pr_debug("Enabling LCD controller\n");
- /* initialize LCDC */
- writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN,
- fbi->regs + LCDC_RMCR); /* just to be safe... */
-
writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
/* physical screen start address */
@@ -465,9 +495,9 @@
info->fix.id, var->lower_margin);
#endif
- writel(HCR_H_WIDTH(var->hsync_len) |
- HCR_H_WAIT_1(var->right_margin) |
- HCR_H_WAIT_2(var->left_margin),
+ writel(HCR_H_WIDTH(var->hsync_len - 1) |
+ HCR_H_WAIT_1(var->right_margin - 1) |
+ HCR_H_WAIT_2(var->left_margin - 3),
fbi->regs + LCDC_HCR);
writel(VCR_V_WIDTH(var->vsync_len) |
@@ -650,6 +680,12 @@
info->fix.smem_start = fbi->screen_dma;
}
+ if (pdata->init) {
+ ret = pdata->init(fbi->pdev);
+ if (ret)
+ goto failed_platform_init;
+ }
+
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
@@ -674,6 +710,9 @@
failed_register:
fb_dealloc_cmap(&info->cmap);
failed_cmap:
+ if (pdata->exit)
+ pdata->exit(fbi->pdev);
+failed_platform_init:
if (!pdata->fixed_screen_cpu)
dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
fbi->map_dma);
@@ -691,6 +730,7 @@
static int __devexit imxfb_remove(struct platform_device *pdev)
{
+ struct imx_fb_platform_data *pdata;
struct fb_info *info = platform_get_drvdata(pdev);
struct imxfb_info *fbi = info->par;
struct resource *res;
@@ -701,6 +741,10 @@
unregister_framebuffer(info);
+ pdata = pdev->dev.platform_data;
+ if (pdata->exit)
+ pdata->exit(fbi->pdev);
+
fb_dealloc_cmap(&info->cmap);
kfree(info->pseudo_palette);
framebuffer_release(info);
diff --git a/drivers/video/logo/logo_linux_clut224.ppm b/drivers/video/logo/logo_linux_clut224.ppm
index 3c14e43..de93ff3 100644
--- a/drivers/video/logo/logo_linux_clut224.ppm
+++ b/drivers/video/logo/logo_linux_clut224.ppm
@@ -1,1604 +1,2828 @@
P3
-# Standard 224-color Linux logo
-80 80
+145 113
255
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 6 6 6 10 10 10 10 10 10
- 10 10 10 6 6 6 6 6 6 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 10 10 10 14 14 14
- 22 22 22 26 26 26 30 30 30 34 34 34
- 30 30 30 30 30 30 26 26 26 18 18 18
- 14 14 14 10 10 10 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 14 14 14 26 26 26 42 42 42
- 54 54 54 66 66 66 78 78 78 78 78 78
- 78 78 78 74 74 74 66 66 66 54 54 54
- 42 42 42 26 26 26 18 18 18 10 10 10
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 22 22 22 42 42 42 66 66 66 86 86 86
- 66 66 66 38 38 38 38 38 38 22 22 22
- 26 26 26 34 34 34 54 54 54 66 66 66
- 86 86 86 70 70 70 46 46 46 26 26 26
- 14 14 14 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 10 10 10 26 26 26
- 50 50 50 82 82 82 58 58 58 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 54 54 54 86 86 86 66 66 66
- 38 38 38 18 18 18 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 22 22 22 50 50 50
- 78 78 78 34 34 34 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 70 70 70
- 78 78 78 46 46 46 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 18 18 18 42 42 42 82 82 82
- 26 26 26 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 14
- 46 46 46 34 34 34 6 6 6 2 2 6
- 42 42 42 78 78 78 42 42 42 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 0 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 10 10 10 30 30 30 66 66 66 58 58 58
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 86 86 86 101 101 101 46 46 46 10 10 10
- 2 2 6 58 58 58 70 70 70 34 34 34
- 10 10 10 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 14 14 14 42 42 42 86 86 86 10 10 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 30 30 30
- 94 94 94 94 94 94 58 58 58 26 26 26
- 2 2 6 6 6 6 78 78 78 54 54 54
- 22 22 22 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 22 22 22 62 62 62 62 62 62 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 26 26 26
- 54 54 54 38 38 38 18 18 18 10 10 10
- 2 2 6 2 2 6 34 34 34 82 82 82
- 38 38 38 14 14 14 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 30 30 30 78 78 78 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 10 10 10 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 50 50 50 18 18 18 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 38 38 38 86 86 86 14 14 14 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 54 54 54
- 66 66 66 26 26 26 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 42 42 42 82 82 82 2 2 6 2 2 6
- 2 2 6 6 6 6 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 6 6 6
- 14 14 14 10 10 10 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 18 18 18
- 82 82 82 34 34 34 10 10 10 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 46 46 46 86 86 86 2 2 6 2 2 6
- 6 6 6 6 6 6 22 22 22 34 34 34
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 34 34 34
- 10 10 10 50 50 50 22 22 22 2 2 6
- 2 2 6 2 2 6 2 2 6 10 10 10
- 86 86 86 42 42 42 14 14 14 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 1 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 46 46 46 86 86 86 2 2 6 2 2 6
- 38 38 38 116 116 116 94 94 94 22 22 22
- 22 22 22 2 2 6 2 2 6 2 2 6
- 14 14 14 86 86 86 138 138 138 162 162 162
-154 154 154 38 38 38 26 26 26 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 46 46 46 14 14 14 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 46 46 46 86 86 86 2 2 6 14 14 14
-134 134 134 198 198 198 195 195 195 116 116 116
- 10 10 10 2 2 6 2 2 6 6 6 6
-101 98 89 187 187 187 210 210 210 218 218 218
-214 214 214 134 134 134 14 14 14 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 86 86 86 50 50 50 18 18 18 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 1 0 0 0
- 0 0 1 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 46 46 46 86 86 86 2 2 6 54 54 54
-218 218 218 195 195 195 226 226 226 246 246 246
- 58 58 58 2 2 6 2 2 6 30 30 30
-210 210 210 253 253 253 174 174 174 123 123 123
-221 221 221 234 234 234 74 74 74 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 46 46 46 82 82 82 2 2 6 106 106 106
-170 170 170 26 26 26 86 86 86 226 226 226
-123 123 123 10 10 10 14 14 14 46 46 46
-231 231 231 190 190 190 6 6 6 70 70 70
- 90 90 90 238 238 238 158 158 158 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 58 58 58 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 1 0 0 0
- 0 0 1 0 0 1 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 42 42 42 86 86 86 6 6 6 116 116 116
-106 106 106 6 6 6 70 70 70 149 149 149
-128 128 128 18 18 18 38 38 38 54 54 54
-221 221 221 106 106 106 2 2 6 14 14 14
- 46 46 46 190 190 190 198 198 198 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 1 0 0 0
- 0 0 1 0 0 0 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 42 42 42 94 94 94 14 14 14 101 101 101
-128 128 128 2 2 6 18 18 18 116 116 116
-118 98 46 121 92 8 121 92 8 98 78 10
-162 162 162 106 106 106 2 2 6 2 2 6
- 2 2 6 195 195 195 195 195 195 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 62 62 62 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 1 0 0 1
- 0 0 1 0 0 0 0 0 1 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 38 38 38 90 90 90 14 14 14 58 58 58
-210 210 210 26 26 26 54 38 6 154 114 10
-226 170 11 236 186 11 225 175 15 184 144 12
-215 174 15 175 146 61 37 26 9 2 2 6
- 70 70 70 246 246 246 138 138 138 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 70 70 70 66 66 66 26 26 26 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 38 38 38 86 86 86 14 14 14 10 10 10
-195 195 195 188 164 115 192 133 9 225 175 15
-239 182 13 234 190 10 232 195 16 232 200 30
-245 207 45 241 208 19 232 195 16 184 144 12
-218 194 134 211 206 186 42 42 42 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 74 74 74 30 30 30 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 34 34 34 86 86 86 14 14 14 2 2 6
-121 87 25 192 133 9 219 162 10 239 182 13
-236 186 11 232 195 16 241 208 19 244 214 54
-246 218 60 246 218 38 246 215 20 241 208 19
-241 208 19 226 184 13 121 87 25 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 50 50 50 82 82 82 34 34 34 10 10 10
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 34 34 34 82 82 82 30 30 30 61 42 6
-180 123 7 206 145 10 230 174 11 239 182 13
-234 190 10 238 202 15 241 208 19 246 218 74
-246 218 38 246 215 20 246 215 20 246 215 20
-226 184 13 215 174 15 184 144 12 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 26 26 26 94 94 94 42 42 42 14 14 14
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 78 78 78 50 50 50 104 69 6
-192 133 9 216 158 10 236 178 12 236 186 11
-232 195 16 241 208 19 244 214 54 245 215 43
-246 215 20 246 215 20 241 208 19 198 155 10
-200 144 11 216 158 10 156 118 10 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 90 90 90 54 54 54 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 78 78 78 46 46 46 22 22 22
-137 92 6 210 162 10 239 182 13 238 190 10
-238 202 15 241 208 19 246 215 20 246 215 20
-241 208 19 203 166 17 185 133 11 210 150 10
-216 158 10 210 150 10 102 78 10 2 2 6
- 6 6 6 54 54 54 14 14 14 2 2 6
- 2 2 6 62 62 62 74 74 74 30 30 30
- 10 10 10 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 34 34 34 78 78 78 50 50 50 6 6 6
- 94 70 30 139 102 15 190 146 13 226 184 13
-232 200 30 232 195 16 215 174 15 190 146 13
-168 122 10 192 133 9 210 150 10 213 154 11
-202 150 34 182 157 106 101 98 89 2 2 6
- 2 2 6 78 78 78 116 116 116 58 58 58
- 2 2 6 22 22 22 90 90 90 46 46 46
- 18 18 18 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 38 38 38 86 86 86 50 50 50 6 6 6
-128 128 128 174 154 114 156 107 11 168 122 10
-198 155 10 184 144 12 197 138 11 200 144 11
-206 145 10 206 145 10 197 138 11 188 164 115
-195 195 195 198 198 198 174 174 174 14 14 14
- 2 2 6 22 22 22 116 116 116 116 116 116
- 22 22 22 2 2 6 74 74 74 70 70 70
- 30 30 30 10 10 10 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 18 18 18
- 50 50 50 101 101 101 26 26 26 10 10 10
-138 138 138 190 190 190 174 154 114 156 107 11
-197 138 11 200 144 11 197 138 11 192 133 9
-180 123 7 190 142 34 190 178 144 187 187 187
-202 202 202 221 221 221 214 214 214 66 66 66
- 2 2 6 2 2 6 50 50 50 62 62 62
- 6 6 6 2 2 6 10 10 10 90 90 90
- 50 50 50 18 18 18 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 10 10 10 34 34 34
- 74 74 74 74 74 74 2 2 6 6 6 6
-144 144 144 198 198 198 190 190 190 178 166 146
-154 121 60 156 107 11 156 107 11 168 124 44
-174 154 114 187 187 187 190 190 190 210 210 210
-246 246 246 253 253 253 253 253 253 182 182 182
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 62 62 62
- 74 74 74 34 34 34 14 14 14 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 10 10 10 22 22 22 54 54 54
- 94 94 94 18 18 18 2 2 6 46 46 46
-234 234 234 221 221 221 190 190 190 190 190 190
-190 190 190 187 187 187 187 187 187 190 190 190
-190 190 190 195 195 195 214 214 214 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
- 82 82 82 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 14 14 14
- 86 86 86 54 54 54 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 18 18 18 46 46 46 90 90 90
- 46 46 46 18 18 18 6 6 6 182 182 182
-253 253 253 246 246 246 206 206 206 190 190 190
-190 190 190 190 190 190 190 190 190 190 190 190
-206 206 206 231 231 231 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-202 202 202 14 14 14 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 42 86 86 86 42 42 42 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 14 14 14 38 38 38 74 74 74 66 66 66
- 2 2 6 6 6 6 90 90 90 250 250 250
-253 253 253 253 253 253 238 238 238 198 198 198
-190 190 190 190 190 190 195 195 195 221 221 221
-246 246 246 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 82 82 82 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 78 78 78 70 70 70 34 34 34
- 14 14 14 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 34 34 34 66 66 66 78 78 78 6 6 6
- 2 2 6 18 18 18 218 218 218 253 253 253
-253 253 253 253 253 253 253 253 253 246 246 246
-226 226 226 231 231 231 246 246 246 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 178 178 178 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 18 18 18 90 90 90 62 62 62
- 30 30 30 10 10 10 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 10 10 10 26 26 26
- 58 58 58 90 90 90 18 18 18 2 2 6
- 2 2 6 110 110 110 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 231 231 231 18 18 18 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 94 94 94
- 54 54 54 26 26 26 10 10 10 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 22 22 22 50 50 50
- 90 90 90 26 26 26 2 2 6 2 2 6
- 14 14 14 195 195 195 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 242 242 242 54 54 54 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 86 86 86 50 50 50 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 14 14 14 38 38 38 82 82 82
- 34 34 34 2 2 6 2 2 6 2 2 6
- 42 42 42 195 195 195 246 246 246 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-242 242 242 242 242 242 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 250 250 250 246 246 246 238 238 238
-226 226 226 231 231 231 101 101 101 6 6 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 38 38 38 82 82 82 42 42 42 14 14 14
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 10 10 10 26 26 26 62 62 62 66 66 66
- 2 2 6 2 2 6 2 2 6 6 6 6
- 70 70 70 170 170 170 206 206 206 234 234 234
-246 246 246 250 250 250 250 250 250 238 238 238
-226 226 226 231 231 231 238 238 238 250 250 250
-250 250 250 250 250 250 246 246 246 231 231 231
-214 214 214 206 206 206 202 202 202 202 202 202
-198 198 198 202 202 202 182 182 182 18 18 18
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 62 62 62 66 66 66 30 30 30
- 10 10 10 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 14 14 14 42 42 42 82 82 82 18 18 18
- 2 2 6 2 2 6 2 2 6 10 10 10
- 94 94 94 182 182 182 218 218 218 242 242 242
-250 250 250 253 253 253 253 253 253 250 250 250
-234 234 234 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 246 246 246
-238 238 238 226 226 226 210 210 210 202 202 202
-195 195 195 195 195 195 210 210 210 158 158 158
- 6 6 6 14 14 14 50 50 50 14 14 14
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 86 86 86 46 46 46
- 18 18 18 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 22 22 22 54 54 54 70 70 70 2 2 6
- 2 2 6 10 10 10 2 2 6 22 22 22
-166 166 166 231 231 231 250 250 250 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-242 242 242 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 246 246 246
-231 231 231 206 206 206 198 198 198 226 226 226
- 94 94 94 2 2 6 6 6 6 38 38 38
- 30 30 30 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 62 62 62 66 66 66
- 26 26 26 10 10 10 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 74 74 74 50 50 50 2 2 6
- 26 26 26 26 26 26 2 2 6 106 106 106
-238 238 238 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 246 246 246 218 218 218 202 202 202
-210 210 210 14 14 14 2 2 6 2 2 6
- 30 30 30 22 22 22 2 2 6 2 2 6
- 2 2 6 2 2 6 18 18 18 86 86 86
- 42 42 42 14 14 14 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 42 42 42 90 90 90 22 22 22 2 2 6
- 42 42 42 2 2 6 18 18 18 218 218 218
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 250 250 250 221 221 221
-218 218 218 101 101 101 2 2 6 14 14 14
- 18 18 18 38 38 38 10 10 10 2 2 6
- 2 2 6 2 2 6 2 2 6 78 78 78
- 58 58 58 22 22 22 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 18 18 18
- 54 54 54 82 82 82 2 2 6 26 26 26
- 22 22 22 2 2 6 123 123 123 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-238 238 238 198 198 198 6 6 6 38 38 38
- 58 58 58 26 26 26 38 38 38 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 78 78 78 30 30 30 10 10 10 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 10 10 10 30 30 30
- 74 74 74 58 58 58 2 2 6 42 42 42
- 2 2 6 22 22 22 231 231 231 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 250 250 250
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 246 246 246 46 46 46 38 38 38
- 42 42 42 14 14 14 38 38 38 14 14 14
- 2 2 6 2 2 6 2 2 6 6 6 6
- 86 86 86 46 46 46 14 14 14 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 14 14 14 42 42 42
- 90 90 90 18 18 18 18 18 18 26 26 26
- 2 2 6 116 116 116 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 250 250 250 238 238 238
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 94 94 94 6 6 6
- 2 2 6 2 2 6 10 10 10 34 34 34
- 2 2 6 2 2 6 2 2 6 2 2 6
- 74 74 74 58 58 58 22 22 22 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 10 10 10 26 26 26 66 66 66
- 82 82 82 2 2 6 38 38 38 6 6 6
- 14 14 14 210 210 210 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 246 246 246 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 144 144 144 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 42 42 42 74 74 74 30 30 30 10 10 10
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 14 14 14 42 42 42 90 90 90
- 26 26 26 6 6 6 42 42 42 2 2 6
- 74 74 74 250 250 250 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 242 242 242 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 182 182 182 2 2 6
- 2 2 6 2 2 6 2 2 6 46 46 46
- 2 2 6 2 2 6 2 2 6 2 2 6
- 10 10 10 86 86 86 38 38 38 10 10 10
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 10 10 10 26 26 26 66 66 66 82 82 82
- 2 2 6 22 22 22 18 18 18 2 2 6
-149 149 149 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 206 206 206 2 2 6
- 2 2 6 2 2 6 2 2 6 38 38 38
- 2 2 6 2 2 6 2 2 6 2 2 6
- 6 6 6 86 86 86 46 46 46 14 14 14
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 18 18 18 46 46 46 86 86 86 18 18 18
- 2 2 6 34 34 34 10 10 10 6 6 6
-210 210 210 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 221 221 221 6 6 6
- 2 2 6 2 2 6 6 6 6 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 26 26 26 66 66 66 62 62 62 2 2 6
- 2 2 6 38 38 38 10 10 10 26 26 26
-238 238 238 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 238 238 238
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 6 6 6
- 2 2 6 2 2 6 10 10 10 30 30 30
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 38 38 38 78 78 78 6 6 6 2 2 6
- 2 2 6 46 46 46 14 14 14 42 42 42
-246 246 246 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 10 10 10
- 2 2 6 2 2 6 22 22 22 14 14 14
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 18 18 18
- 50 50 50 74 74 74 2 2 6 2 2 6
- 14 14 14 70 70 70 34 34 34 62 62 62
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 14 14 14
- 2 2 6 2 2 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 62 62 62 22 22 22
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 18 18 18
- 54 54 54 62 62 62 2 2 6 2 2 6
- 2 2 6 30 30 30 46 46 46 70 70 70
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 226 226 226 10 10 10
- 2 2 6 6 6 6 30 30 30 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 66 66 66 58 58 58 22 22 22
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 22 22 22
- 58 58 58 62 62 62 2 2 6 2 2 6
- 2 2 6 2 2 6 30 30 30 78 78 78
-250 250 250 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 206 206 206 2 2 6
- 22 22 22 34 34 34 18 14 6 22 22 22
- 26 26 26 18 18 18 6 6 6 2 2 6
- 2 2 6 82 82 82 54 54 54 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 26 26 26
- 62 62 62 106 106 106 74 54 14 185 133 11
-210 162 10 121 92 8 6 6 6 62 62 62
-238 238 238 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 246 246 246
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 158 158 158 18 18 18
- 14 14 14 2 2 6 2 2 6 2 2 6
- 6 6 6 18 18 18 66 66 66 38 38 38
- 6 6 6 94 94 94 50 50 50 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 10 10 10 10 10 10 18 18 18 38 38 38
- 78 78 78 142 134 106 216 158 10 242 186 14
-246 190 14 246 190 14 156 118 10 10 10 10
- 90 90 90 238 238 238 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 250 250 250
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 246 230 190
-238 204 91 238 204 91 181 142 44 37 26 9
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 38 38 38 46 46 46
- 26 26 26 106 106 106 54 54 54 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 14 14 14 22 22 22
- 30 30 30 38 38 38 50 50 50 70 70 70
-106 106 106 190 142 34 226 170 11 242 186 14
-246 190 14 246 190 14 246 190 14 154 114 10
- 6 6 6 74 74 74 226 226 226 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 231 231 231 250 250 250
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 228 184 62
-241 196 14 241 208 19 232 195 16 38 30 10
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 30 30 30 26 26 26
-203 166 17 154 142 90 66 66 66 26 26 26
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 18 18 18 38 38 38 58 58 58
- 78 78 78 86 86 86 101 101 101 123 123 123
-175 146 61 210 150 10 234 174 13 246 186 14
-246 190 14 246 190 14 246 190 14 238 190 10
-102 78 10 2 2 6 46 46 46 198 198 198
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 234 234 234 242 242 242
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 224 178 62
-242 186 14 241 196 14 210 166 10 22 18 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 6 6 6 121 92 8
-238 202 15 232 195 16 82 82 82 34 34 34
- 10 10 10 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 14 14 14 38 38 38 70 70 70 154 122 46
-190 142 34 200 144 11 197 138 11 197 138 11
-213 154 11 226 170 11 242 186 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-225 175 15 46 32 6 2 2 6 22 22 22
-158 158 158 250 250 250 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 250 250 250 242 242 242 224 178 62
-239 182 13 236 186 11 213 154 11 46 32 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 61 42 6 225 175 15
-238 190 10 236 186 11 112 100 78 42 42 42
- 14 14 14 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 22 22 22 54 54 54 154 122 46 213 154 11
-226 170 11 230 174 11 226 170 11 226 170 11
-236 178 12 242 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-241 196 14 184 144 12 10 10 10 2 2 6
- 6 6 6 116 116 116 242 242 242 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 231 231 231 198 198 198 214 170 54
-236 178 12 236 178 12 210 150 10 137 92 6
- 18 14 6 2 2 6 2 2 6 2 2 6
- 6 6 6 70 47 6 200 144 11 236 178 12
-239 182 13 239 182 13 124 112 88 58 58 58
- 22 22 22 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 70 70 70 180 133 36 226 170 11
-239 182 13 242 186 14 242 186 14 246 186 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 232 195 16 98 70 6 2 2 6
- 2 2 6 2 2 6 66 66 66 221 221 221
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 206 206 206 198 198 198 214 166 58
-230 174 11 230 174 11 216 158 10 192 133 9
-163 110 8 116 81 8 102 78 10 116 81 8
-167 114 7 197 138 11 226 170 11 239 182 13
-242 186 14 242 186 14 162 146 94 78 78 78
- 34 34 34 14 14 14 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 30 30 30 78 78 78 190 142 34 226 170 11
-239 182 13 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 241 196 14 203 166 17 22 18 6
- 2 2 6 2 2 6 2 2 6 38 38 38
-218 218 218 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 206 206 206 198 198 198 202 162 69
-226 170 11 236 178 12 224 166 10 210 150 10
-200 144 11 197 138 11 192 133 9 197 138 11
-210 150 10 226 170 11 242 186 14 246 190 14
-246 190 14 246 186 14 225 175 15 124 112 88
- 62 62 62 30 30 30 14 14 14 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 78 78 78 174 135 50 224 166 10
-239 182 13 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 241 196 14 139 102 15
- 2 2 6 2 2 6 2 2 6 2 2 6
- 78 78 78 250 250 250 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-250 250 250 214 214 214 198 198 198 190 150 46
-219 162 10 236 178 12 234 174 13 224 166 10
-216 158 10 213 154 11 213 154 11 216 158 10
-226 170 11 239 182 13 246 190 14 246 190 14
-246 190 14 246 190 14 242 186 14 206 162 42
-101 101 101 58 58 58 30 30 30 14 14 14
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 74 74 74 174 135 50 216 158 10
-236 178 12 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 241 196 14 226 184 13
- 61 42 6 2 2 6 2 2 6 2 2 6
- 22 22 22 238 238 238 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 226 226 226 187 187 187 180 133 36
-216 158 10 236 178 12 239 182 13 236 178 12
-230 174 11 226 170 11 226 170 11 230 174 11
-236 178 12 242 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 186 14 239 182 13
-206 162 42 106 106 106 66 66 66 34 34 34
- 14 14 14 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 26 26 26 70 70 70 163 133 67 213 154 11
-236 178 12 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 241 196 14
-190 146 13 18 14 6 2 2 6 2 2 6
- 46 46 46 246 246 246 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 221 221 221 86 86 86 156 107 11
-216 158 10 236 178 12 242 186 14 246 186 14
-242 186 14 239 182 13 239 182 13 242 186 14
-242 186 14 246 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-242 186 14 225 175 15 142 122 72 66 66 66
- 30 30 30 10 10 10 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 26 26 26 70 70 70 163 133 67 210 150 10
-236 178 12 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-232 195 16 121 92 8 34 34 34 106 106 106
-221 221 221 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-242 242 242 82 82 82 18 14 6 163 110 8
-216 158 10 236 178 12 242 186 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 242 186 14 163 133 67
- 46 46 46 18 18 18 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 10 10 10
- 30 30 30 78 78 78 163 133 67 210 150 10
-236 178 12 246 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-241 196 14 215 174 15 190 178 144 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 218 218 218
- 58 58 58 2 2 6 22 18 6 167 114 7
-216 158 10 236 178 12 246 186 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 186 14 242 186 14 190 150 46
- 54 54 54 22 22 22 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 38 38 38 86 86 86 180 133 36 213 154 11
-236 178 12 246 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 232 195 16 190 146 13 214 214 214
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 250 250 250 170 170 170 26 26 26
- 2 2 6 2 2 6 37 26 9 163 110 8
-219 162 10 239 182 13 246 186 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 186 14 236 178 12 224 166 10 142 122 72
- 46 46 46 18 18 18 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 18 18 18
- 50 50 50 109 106 95 192 133 9 224 166 10
-242 186 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-242 186 14 226 184 13 210 162 10 142 110 46
-226 226 226 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-253 253 253 253 253 253 253 253 253 253 253 253
-198 198 198 66 66 66 2 2 6 2 2 6
- 2 2 6 2 2 6 50 34 6 156 107 11
-219 162 10 239 182 13 246 186 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 242 186 14
-234 174 13 213 154 11 154 122 46 66 66 66
- 30 30 30 10 10 10 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 22 22 22
- 58 58 58 154 121 60 206 145 10 234 174 13
-242 186 14 246 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 186 14 236 178 12 210 162 10 163 110 8
- 61 42 6 138 138 138 218 218 218 250 250 250
-253 253 253 253 253 253 253 253 253 250 250 250
-242 242 242 210 210 210 144 144 144 66 66 66
- 6 6 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 61 42 6 163 110 8
-216 158 10 236 178 12 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 239 182 13 230 174 11 216 158 10
-190 142 34 124 112 88 70 70 70 38 38 38
- 18 18 18 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 22 22 22
- 62 62 62 168 124 44 206 145 10 224 166 10
-236 178 12 239 182 13 242 186 14 242 186 14
-246 186 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 236 178 12 216 158 10 175 118 6
- 80 54 7 2 2 6 6 6 6 30 30 30
- 54 54 54 62 62 62 50 50 50 38 38 38
- 14 14 14 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 80 54 7 167 114 7
-213 154 11 236 178 12 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 190 14 242 186 14 239 182 13 239 182 13
-230 174 11 210 150 10 174 135 50 124 112 88
- 82 82 82 54 54 54 34 34 34 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 18 18 18
- 50 50 50 158 118 36 192 133 9 200 144 11
-216 158 10 219 162 10 224 166 10 226 170 11
-230 174 11 236 178 12 239 182 13 239 182 13
-242 186 14 246 186 14 246 190 14 246 190 14
-246 190 14 246 190 14 246 190 14 246 190 14
-246 186 14 230 174 11 210 150 10 163 110 8
-104 69 6 10 10 10 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 91 60 6 167 114 7
-206 145 10 230 174 11 242 186 14 246 190 14
-246 190 14 246 190 14 246 186 14 242 186 14
-239 182 13 230 174 11 224 166 10 213 154 11
-180 133 36 124 112 88 86 86 86 58 58 58
- 38 38 38 22 22 22 10 10 10 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 14 14 14
- 34 34 34 70 70 70 138 110 50 158 118 36
-167 114 7 180 123 7 192 133 9 197 138 11
-200 144 11 206 145 10 213 154 11 219 162 10
-224 166 10 230 174 11 239 182 13 242 186 14
-246 186 14 246 186 14 246 186 14 246 186 14
-239 182 13 216 158 10 185 133 11 152 99 6
-104 69 6 18 14 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 2 2 6 2 2 6 2 2 6
- 2 2 6 6 6 6 80 54 7 152 99 6
-192 133 9 219 162 10 236 178 12 239 182 13
-246 186 14 242 186 14 239 182 13 236 178 12
-224 166 10 206 145 10 192 133 9 154 121 60
- 94 94 94 62 62 62 42 42 42 22 22 22
- 14 14 14 6 6 6 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 18 18 18 34 34 34 58 58 58 78 78 78
-101 98 89 124 112 88 142 110 46 156 107 11
-163 110 8 167 114 7 175 118 6 180 123 7
-185 133 11 197 138 11 210 150 10 219 162 10
-226 170 11 236 178 12 236 178 12 234 174 13
-219 162 10 197 138 11 163 110 8 130 83 6
- 91 60 6 10 10 10 2 2 6 2 2 6
- 18 18 18 38 38 38 38 38 38 38 38 38
- 38 38 38 38 38 38 38 38 38 38 38 38
- 38 38 38 38 38 38 26 26 26 2 2 6
- 2 2 6 6 6 6 70 47 6 137 92 6
-175 118 6 200 144 11 219 162 10 230 174 11
-234 174 13 230 174 11 219 162 10 210 150 10
-192 133 9 163 110 8 124 112 88 82 82 82
- 50 50 50 30 30 30 14 14 14 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 14 14 14 22 22 22 34 34 34
- 42 42 42 58 58 58 74 74 74 86 86 86
-101 98 89 122 102 70 130 98 46 121 87 25
-137 92 6 152 99 6 163 110 8 180 123 7
-185 133 11 197 138 11 206 145 10 200 144 11
-180 123 7 156 107 11 130 83 6 104 69 6
- 50 34 6 54 54 54 110 110 110 101 98 89
- 86 86 86 82 82 82 78 78 78 78 78 78
- 78 78 78 78 78 78 78 78 78 78 78 78
- 78 78 78 82 82 82 86 86 86 94 94 94
-106 106 106 101 101 101 86 66 34 124 80 6
-156 107 11 180 123 7 192 133 9 200 144 11
-206 145 10 200 144 11 192 133 9 175 118 6
-139 102 15 109 106 95 70 70 70 42 42 42
- 22 22 22 10 10 10 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 6 6 6 10 10 10
- 14 14 14 22 22 22 30 30 30 38 38 38
- 50 50 50 62 62 62 74 74 74 90 90 90
-101 98 89 112 100 78 121 87 25 124 80 6
-137 92 6 152 99 6 152 99 6 152 99 6
-138 86 6 124 80 6 98 70 6 86 66 30
-101 98 89 82 82 82 58 58 58 46 46 46
- 38 38 38 34 34 34 34 34 34 34 34 34
- 34 34 34 34 34 34 34 34 34 34 34 34
- 34 34 34 34 34 34 38 38 38 42 42 42
- 54 54 54 82 82 82 94 86 76 91 60 6
-134 86 6 156 107 11 167 114 7 175 118 6
-175 118 6 167 114 7 152 99 6 121 87 25
-101 98 89 62 62 62 34 34 34 18 18 18
- 6 6 6 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 6 6 6 10 10 10
- 18 18 18 22 22 22 30 30 30 42 42 42
- 50 50 50 66 66 66 86 86 86 101 98 89
-106 86 58 98 70 6 104 69 6 104 69 6
-104 69 6 91 60 6 82 62 34 90 90 90
- 62 62 62 38 38 38 22 22 22 14 14 14
- 10 10 10 10 10 10 10 10 10 10 10 10
- 10 10 10 10 10 10 6 6 6 10 10 10
- 10 10 10 10 10 10 10 10 10 14 14 14
- 22 22 22 42 42 42 70 70 70 89 81 66
- 80 54 7 104 69 6 124 80 6 137 92 6
-134 86 6 116 81 8 100 82 52 86 86 86
- 58 58 58 30 30 30 14 14 14 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 10 10 10 14 14 14
- 18 18 18 26 26 26 38 38 38 54 54 54
- 70 70 70 86 86 86 94 86 76 89 81 66
- 89 81 66 86 86 86 74 74 74 50 50 50
- 30 30 30 14 14 14 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 18 18 18 34 34 34 58 58 58
- 82 82 82 89 81 66 89 81 66 89 81 66
- 94 86 66 94 86 76 74 74 74 50 50 50
- 26 26 26 14 14 14 6 6 6 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 6 6 6 6 6 6 14 14 14 18 18 18
- 30 30 30 38 38 38 46 46 46 54 54 54
- 50 50 50 42 42 42 30 30 30 18 18 18
- 10 10 10 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 6 6 6 14 14 14 26 26 26
- 38 38 38 50 50 50 58 58 58 58 58 58
- 54 54 54 42 42 42 30 30 30 18 18 18
- 10 10 10 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 6 6 6 10 10 10 14 14 14 18 18 18
- 18 18 18 14 14 14 10 10 10 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 6 6 6
- 14 14 14 18 18 18 22 22 22 22 22 22
- 18 18 18 14 14 14 10 10 10 6 6 6
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 3 4 4 6 7 7
+8 10 10 8 10 10 6 8 8 6 7 7 3 4 4 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 4 5 5 17 18 17
+27 29 28 35 37 36 40 43 41 43 45 43 40 43 41 37 39 37
+32 34 33 27 30 29 23 25 24 17 21 21 15 18 18 12 15 15
+11 13 13 8 10 10 6 7 7 3 4 4 1 1 1 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 13 13 13 32 34 33 49 51 48 60 60 56 58 59 55
+55 57 54 55 56 53 49 51 48 43 45 43 39 40 39 33 37 35
+28 31 30 23 27 26 20 23 23 17 20 20 14 17 17 13 16 16
+11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 6 7 7
+2 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 12 15 15
+12 15 15 8 9 9 2 3 3 0 0 0 1 1 1 25 27 26
+55 56 53 68 70 65 65 66 61 65 66 61 63 64 60 63 64 60
+58 59 55 51 52 50 47 48 46 41 42 42 35 37 36 30 32 31
+26 28 27 20 24 24 18 22 22 16 19 19 14 17 17 13 16 16
+12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
+8 9 9 6 8 8 3 3 3 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 6 7 7 20 24 24 23 27 26
+23 27 26 18 22 22 11 13 13 23 24 24 61 63 57 72 73 67
+72 73 67 68 70 65 68 70 65 68 70 65 63 64 60 58 59 55
+55 56 53 47 48 46 41 42 42 35 37 36 30 32 31 26 28 27
+20 24 24 18 22 22 16 20 20 15 19 19 14 17 17 13 16 16
+12 15 15 12 15 15 11 14 14 10 13 13 10 12 12 9 11 11
+8 10 10 8 9 9 7 9 9 6 7 7 1 2 2 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 1 4 5 5 5 6 5 4 5 5
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 15 19 19 40 41 39 53 55 47
+33 36 34 27 30 29 51 52 50 72 73 67 72 73 67 72 73 67
+72 73 67 68 70 65 68 70 65 63 64 60 58 59 55 51 52 50
+47 48 46 40 43 41 33 37 35 30 32 31 26 28 27 20 24 24
+18 22 22 17 21 21 16 19 19 14 18 18 14 17 17 13 17 17
+13 16 16 12 15 15 12 15 15 11 14 14 10 13 13 10 12 12
+9 11 11 8 10 10 8 9 9 7 9 9 6 8 8 3 4 4
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+2 2 2 6 8 8 10 12 12 10 12 12 10 12 12 10 12 12
+6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 20 23 23 71 71 57 131 127 93
+115 113 82 63 64 60 72 73 67 72 73 67 72 73 67 72 73 67
+68 70 65 65 66 61 61 63 57 55 57 54 49 51 48 43 45 43
+39 40 39 33 36 34 28 31 30 23 27 26 20 24 24 20 23 23
+17 21 21 16 20 20 15 19 19 15 18 18 14 18 18 14 17 17
+13 17 17 13 16 16 12 15 15 12 15 15 11 14 14 10 13 13
+10 12 12 9 11 11 8 10 10 7 9 9 7 9 9 6 8 8
+4 5 5 0 0 0 0 0 0 0 0 0 1 1 1 6 7 7
+10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
+10 12 12 3 4 4 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 18 22 22 71 71 57 144 139 99
+84 83 72 68 70 65 72 73 67 72 73 67 68 70 65 65 66 61
+63 64 60 55 57 54 51 52 50 47 48 46 40 43 41 35 37 36
+30 32 31 27 29 28 23 27 26 20 24 24 18 22 22 17 21 21
+16 20 20 15 19 19 15 19 19 15 19 19 15 18 18 14 18 18
+14 17 17 13 17 17 13 16 16 12 15 15 12 15 15 11 14 14
+10 13 13 9 12 12 9 11 11 8 10 10 7 9 9 6 8 8
+6 8 8 3 4 4 0 0 0 2 2 2 8 10 10 10 12 12
+10 12 12 10 12 12 11 13 13 36 38 35 61 61 53 48 49 45
+10 12 12 7 9 9 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 15 19 19 61 61 53 84 83 72
+68 70 65 72 73 67 68 70 65 68 70 65 63 64 60 58 59 55
+51 52 50 47 48 46 41 42 42 37 39 37 32 35 33 28 31 30
+23 27 26 20 24 24 20 23 23 18 22 22 17 21 21 17 21 21
+17 21 21 17 21 21 17 20 20 16 20 20 16 20 20 16 19 19
+15 18 18 14 18 18 13 17 17 13 16 16 12 15 15 12 15 15
+11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 7 9 9
+6 8 8 6 8 8 5 6 5 9 11 11 10 12 12 10 12 12
+19 20 18 82 81 62 149 145 103 160 154 106 142 137 94 96 95 69
+10 12 12 10 12 12 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 10 12 12 44 46 43 68 70 65
+72 73 67 68 70 65 68 70 65 63 64 60 55 57 54 49 51 48
+43 45 43 39 40 39 33 37 35 30 32 31 26 28 27 23 27 26
+20 24 24 18 22 22 18 22 22 18 22 22 18 22 22 20 23 23
+20 24 24 23 25 24 23 25 24 22 24 23 20 23 23 18 22 22
+17 20 20 15 19 19 15 18 18 14 17 17 13 16 16 12 15 15
+11 14 14 11 13 13 10 12 12 9 11 11 8 10 10 8 9 9
+7 9 9 7 9 9 10 12 12 10 12 12 10 12 12 71 71 57
+164 159 111 186 182 128 186 182 128 171 165 117 151 147 98 96 95 69
+10 12 12 10 12 12 3 3 3 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 8 10 10 63 64 60 68 70 65
+72 73 67 68 70 65 63 64 60 55 57 54 47 48 46 40 43 41
+33 37 35 30 32 31 27 29 28 23 27 26 20 24 24 20 23 23
+18 22 22 18 22 22 20 23 22 21 25 23 23 27 26 27 29 28
+28 31 30 31 33 31 31 33 31 31 33 31 28 31 30 26 28 27
+23 25 24 20 23 22 16 20 20 15 18 18 14 17 17 13 16 16
+12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
+10 12 12 10 13 13 10 12 12 12 14 14 96 95 69 165 161 109
+186 182 128 192 187 134 192 187 134 176 171 126 160 154 106 103 101 77
+10 12 12 10 12 12 5 6 5 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 35 37 36 68 70 65 72 73 67
+68 70 65 65 66 61 58 59 55 49 51 48 40 43 41 33 37 35
+28 31 30 23 27 26 20 24 24 20 23 23 18 22 22 18 22 22
+18 22 22 20 23 23 23 27 26 27 30 29 32 35 33 37 39 37
+40 43 41 44 46 43 46 47 43 44 46 43 40 43 41 36 38 35
+31 33 31 27 29 28 22 24 23 17 21 21 15 18 18 14 17 17
+13 16 16 12 15 15 11 14 14 11 14 14 11 13 13 13 16 16
+13 16 16 11 14 14 10 12 12 79 78 62 142 137 94 164 159 111
+178 174 128 192 187 134 192 187 134 176 171 126 160 154 106 96 95 69
+10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 55 57 54 68 70 65 72 73 67
+68 70 65 63 64 60 55 56 53 43 45 43 35 37 36 28 31 30
+23 27 26 20 24 24 18 22 22 17 21 21 17 21 21 17 21 21
+20 24 24 25 27 26 31 33 31 38 39 37 46 47 43 53 55 47
+61 61 53 66 65 55 66 65 55 66 65 55 61 61 53 53 55 47
+46 47 43 37 39 37 30 33 30 24 26 24 17 21 21 15 18 18
+13 17 17 12 15 15 12 15 15 13 16 16 14 18 18 14 18 18
+14 17 17 12 15 15 30 31 28 118 116 76 134 131 96 160 154 106
+174 170 121 178 174 128 178 174 128 171 165 117 151 147 98 96 95 69
+10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 63 64 60 68 70 65 68 70 65
+65 66 61 58 59 55 49 51 48 39 40 39 30 32 31 23 27 26
+20 24 24 18 22 22 17 21 21 16 20 20 17 21 21 20 23 23
+25 27 26 32 35 33 43 44 41 53 55 47 66 65 55 75 75 61
+82 81 62 84 83 72 87 86 72 87 86 72 82 81 62 75 75 61
+66 65 55 53 55 47 40 41 39 31 33 31 23 25 24 17 20 20
+14 18 18 13 16 16 12 15 15 12 15 15 13 17 17 14 18 18
+14 18 18 13 16 16 46 47 43 96 95 69 125 122 87 142 137 94
+160 154 106 165 161 109 164 159 111 155 149 109 142 137 94 75 75 61
+10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 60 60 56 68 70 65 68 70 65
+63 64 60 55 57 54 46 47 45 35 37 36 27 30 29 23 25 24
+18 22 22 17 21 21 16 20 20 17 21 21 18 22 22 23 27 26
+31 33 31 43 44 41 55 56 53 71 71 57 84 83 72 92 91 72
+103 101 77 92 91 72 82 81 62 82 81 62 87 86 72 92 91 72
+84 83 72 71 71 57 55 56 53 43 44 41 30 33 30 22 24 23
+16 19 19 14 17 17 12 15 15 12 15 15 13 16 16 14 18 18
+14 18 18 14 17 17 43 44 41 82 81 62 118 116 76 125 122 87
+142 137 94 144 139 99 144 139 99 134 131 96 118 116 76 53 55 47
+10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 47 48 46 63 64 60 63 64 60
+55 57 54 49 51 48 40 43 41 32 34 33 26 28 27 20 24 24
+18 22 22 16 20 20 16 20 20 17 21 21 20 24 24 28 31 30
+40 41 39 53 55 47 75 75 61 90 89 73 87 86 72 48 49 45
+14 14 13 2 2 2 1 2 2 1 1 1 1 1 1 2 2 2
+19 20 18 43 44 41 66 65 55 53 55 47 38 39 37 26 28 27
+18 22 22 14 18 18 13 16 16 12 15 15 12 15 15 13 17 17
+14 18 18 14 18 18 30 31 28 66 65 55 96 95 69 103 101 77
+118 116 76 118 116 76 118 116 76 118 116 76 103 101 77 36 38 35
+10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 28 31 30 55 57 54 51 52 50
+49 51 48 41 42 42 35 37 36 28 31 30 23 27 26 20 23 23
+17 21 21 16 20 20 16 20 20 18 22 22 23 27 26 33 36 34
+48 49 45 71 71 57 82 81 62 43 44 41 8 9 9 6 7 7
+6 7 7 6 7 7 6 7 7 5 6 5 4 5 5 3 4 4
+2 3 3 1 2 2 4 5 4 36 38 35 48 49 45 32 35 33
+21 25 23 16 19 19 13 17 17 12 15 15 12 15 15 13 16 16
+14 18 18 14 18 18 16 18 16 36 38 35 61 61 53 82 81 62
+96 95 69 96 95 69 96 95 69 96 95 69 79 78 62 19 20 18
+10 12 12 10 12 12 4 5 5 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 13 13 13 46 47 45 43 45 43
+40 43 41 35 37 36 30 32 31 23 27 26 20 24 24 18 22 22
+17 21 21 16 20 20 17 21 21 20 23 23 27 30 29 40 41 39
+61 61 53 53 55 47 16 17 16 9 11 11 10 12 12 10 12 12
+10 12 12 10 12 12 10 12 12 9 11 11 8 10 10 8 9 9
+6 8 8 5 6 5 4 5 5 2 3 3 19 20 18 38 39 37
+26 28 27 17 21 21 14 17 17 13 16 16 12 15 15 12 15 15
+13 17 17 14 18 18 12 15 15 13 12 7 30 31 28 46 47 43
+53 55 47 66 65 55 66 65 55 53 55 47 36 38 35 10 12 12
+10 12 12 10 12 12 2 3 3 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 1 1 1 33 37 35 35 37 36
+32 35 33 28 31 30 23 27 26 20 24 24 18 22 22 17 21 21
+16 20 20 16 20 20 17 21 21 21 25 23 31 33 31 44 46 43
+31 33 31 11 13 13 12 14 14 12 15 15 13 16 16 14 17 17
+14 17 17 14 17 17 14 17 17 13 16 16 12 15 15 12 14 14
+11 13 13 9 11 11 8 10 10 6 8 8 4 5 5 17 18 17
+30 33 30 20 23 22 15 18 18 13 16 16 12 15 15 12 14 14
+13 16 16 14 17 17 14 18 18 11 12 11 7 7 5 16 17 12
+21 22 20 30 31 28 25 27 25 21 22 20 14 14 13 10 12 12
+10 12 12 9 11 11 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 18 22 22 27 30 29
+27 29 28 40 41 39 53 55 47 53 55 47 53 55 47 46 47 43
+25 27 25 16 20 20 17 21 21 23 25 24 31 33 31 20 20 20
+12 15 15 14 17 17 15 19 19 16 20 20 17 21 21 18 22 22
+18 22 22 18 22 22 18 22 22 17 21 21 17 21 21 16 19 19
+15 18 18 13 16 16 12 15 15 10 12 12 8 10 10 6 8 8
+21 22 21 22 24 23 15 19 19 13 17 17 13 16 16 12 15 15
+12 15 15 13 17 17 14 18 18 14 18 18 13 15 14 10 9 6
+7 7 5 7 7 5 7 7 5 9 11 11 10 12 12 10 12 12
+10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 82 81 62
+118 116 76 118 116 76 161 156 96 161 156 96 161 156 96 118 116 76
+118 116 76 96 95 69 53 55 47 22 24 23 14 17 17 13 16 16
+15 19 19 17 21 21 18 22 22 20 24 24 20 24 24 23 27 26
+23 27 26 23 27 26 23 27 26 23 27 26 23 27 26 20 24 24
+20 23 23 17 21 21 16 19 19 14 17 17 12 15 15 10 12 12
+9 11 11 20 23 22 16 19 19 14 17 17 13 16 16 12 15 15
+11 14 14 13 16 16 14 17 17 14 18 18 14 17 17 12 15 15
+10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
+9 11 11 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 53 55 47 161 156 96
+161 156 96 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 161 156 96 118 116 76 96 95 69 21 22 20 16 19 19
+18 22 22 20 24 24 23 27 26 23 27 26 26 28 27 27 30 29
+27 30 29 18 22 22 12 14 14 8 10 10 9 11 11 17 21 21
+23 27 26 23 27 26 20 24 24 18 22 22 16 20 20 14 17 17
+12 14 14 14 17 17 16 20 20 14 17 17 13 17 17 13 16 16
+12 15 15 12 15 15 13 17 17 14 18 18 14 17 17 13 16 16
+11 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
+4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 13 12 7 118 116 76 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 30 31 28
+20 24 24 23 27 26 27 30 29 28 31 30 30 32 31 23 27 26
+16 19 19 17 21 21 12 15 15 9 11 11 10 12 12 9 11 11
+20 24 24 28 31 30 26 28 27 23 27 26 20 24 24 17 21 21
+15 19 19 13 16 16 16 19 19 14 18 18 14 17 17 13 16 16
+12 15 15 11 14 14 13 16 16 14 17 17 14 18 18 14 17 17
+12 15 15 10 12 12 10 12 12 10 12 12 10 12 12 8 9 9
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 82 81 62 161 156 96 230 229 82
+230 229 82 233 233 100 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 118 116 76
+27 29 28 27 30 29 30 32 31 30 32 31 23 27 26 20 24 24
+26 28 27 17 21 21 6 7 7 72 73 67 145 141 105 15 15 15
+14 17 17 33 37 35 30 32 31 28 31 30 26 28 27 23 27 26
+20 23 23 16 20 20 15 19 19 14 18 18 14 17 17 13 16 16
+12 15 15 11 14 14 12 15 15 13 17 17 14 18 18 14 17 17
+13 16 16 11 13 13 10 12 12 10 12 12 9 11 11 1 1 1
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 16 17 12 161 156 96 230 229 82 230 229 82
+243 242 120 235 234 117 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
+82 81 62 28 31 30 28 31 30 27 30 29 28 31 30 30 32 31
+33 37 35 13 16 16 3 3 3 105 104 92 210 208 158 12 14 14
+17 21 21 33 37 35 33 37 35 32 35 33 30 32 31 27 30 29
+23 27 26 20 23 23 17 20 20 15 18 18 14 18 18 13 17 17
+13 16 16 12 15 15 11 14 14 13 16 16 14 17 17 14 18 18
+13 17 17 12 15 15 10 12 12 10 12 12 3 4 4 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 96 95 69 230 229 82 230 229 82 244 244 132
+241 241 143 243 242 120 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+161 156 96 46 47 43 32 35 33 33 37 35 33 37 35 33 37 35
+40 43 41 23 27 26 1 1 1 2 2 2 24 26 24 14 17 17
+23 27 26 33 37 35 33 37 35 33 37 35 33 37 35 30 32 31
+27 30 29 23 27 26 20 23 23 15 18 18 14 18 18 14 17 17
+13 16 16 12 15 15 11 14 14 12 15 15 13 17 17 14 17 17
+14 17 17 13 16 16 11 13 13 6 8 8 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 16 17 12 161 156 96 230 229 82 235 234 117 239 239 170
+239 239 170 236 236 101 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 118 116 76 33 37 35 33 37 35 37 39 37 37 39 37
+43 45 43 49 51 48 20 24 24 8 10 10 17 20 20 35 37 36
+33 37 35 40 43 41 37 39 37 35 37 36 33 37 35 33 37 35
+30 32 31 27 30 29 23 27 26 15 19 19 14 18 18 14 17 17
+13 17 17 13 16 16 12 15 15 11 14 14 13 16 16 14 17 17
+14 17 17 13 17 17 11 14 14 4 5 5 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 96 95 69 230 229 82 230 229 82 239 239 170 251 251 187
+241 241 143 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 161 156 96 36 38 35 33 37 35 33 37 35 33 37 35
+37 39 37 47 48 46 55 57 54 55 57 54 49 51 48 43 45 43
+43 45 43 43 45 43 40 43 41 40 43 41 37 39 37 33 37 35
+33 37 35 28 31 30 26 28 27 16 20 20 15 18 18 14 18 18
+14 17 17 13 16 16 12 15 15 11 14 14 12 15 15 13 17 17
+14 17 17 14 17 17 8 10 10 5 7 7 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+16 17 12 230 229 82 230 229 82 243 242 120 251 251 187 251 251 187
+246 246 123 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 66 65 55 30 32 31 32 35 33 33 37 35
+33 37 35 37 39 37 40 43 41 47 48 46 49 51 48 51 52 50
+55 57 54 55 57 54 51 52 50 47 48 46 43 45 43 39 40 39
+33 37 35 30 32 31 26 28 27 17 21 21 15 19 19 14 18 18
+14 17 17 13 16 16 12 15 15 12 14 14 11 14 14 13 16 16
+14 17 17 12 15 15 7 9 9 6 8 8 1 1 1 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+96 95 69 230 229 82 230 229 82 239 239 170 251 251 187 239 239 170
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 96 95 69 27 30 29 28 31 30 30 32 31
+33 37 35 40 43 41 46 47 45 55 57 54 63 64 60 72 73 67
+72 73 67 72 73 67 72 73 67 65 66 61 55 57 54 47 48 46
+39 40 39 32 35 33 27 30 29 17 21 21 15 19 19 15 18 18
+14 18 18 13 17 17 13 16 16 12 15 15 11 14 14 12 14 14
+13 16 16 9 11 11 7 9 9 9 11 11 66 65 55 115 113 82
+21 22 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 12 7
+230 229 82 230 229 82 236 236 101 251 251 187 251 251 187 246 246 123
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 118 116 76 23 27 26 26 28 27 32 35 33
+51 52 50 90 89 73 110 109 94 145 141 105 168 163 120 177 172 135
+177 172 135 188 184 146 188 184 146 181 176 137 194 191 148 188 184 146
+184 179 149 188 184 146 188 184 146 156 151 111 177 172 135 181 176 137
+177 172 135 168 163 120 168 163 120 158 153 112 156 151 111 158 153 112
+156 151 111 158 153 112 177 172 135 188 184 146 188 184 146 194 189 146
+36 38 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 82 81 62
+230 229 82 230 229 82 244 244 132 251 251 187 244 244 132 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 82 81 62
+96 95 69 230 229 82 181 178 103 110 109 94 156 151 111 188 184 146
+188 184 146 197 193 154 188 184 146 184 181 136 188 184 146 168 163 120
+168 163 120 178 174 128 156 151 111 158 153 112 174 170 121 156 151 111
+156 151 111 158 153 112 156 151 111 168 163 120 178 174 128 181 176 137
+176 171 126 178 174 128 184 181 136 176 171 126 178 174 128 184 181 136
+176 171 126 178 174 128 184 181 136 164 159 111 155 149 109 96 95 69
+1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 2 2 1 161 156 96
+230 229 82 230 229 82 244 244 132 244 244 132 236 236 101 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 46 47 43 82 81 62
+158 153 112 197 193 154 194 189 146 184 181 136 188 184 146 168 163 120
+156 151 111 137 133 100 131 127 93 137 133 100 137 133 100 158 153 112
+121 119 87 137 133 100 156 151 111 145 141 105 99 98 80 84 83 72
+63 64 60 52 53 49 40 43 41 33 36 34 36 38 35 36 38 35
+38 39 37 43 44 41 43 44 41 46 47 43 48 49 45 48 49 45
+46 47 43 36 38 35 30 31 28 19 20 18 6 7 7 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 230 229 82
+230 229 82 230 229 82 246 246 123 236 236 101 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 53 55 47 121 119 87
+176 171 126 171 165 117 161 156 96 82 81 62 53 55 47 33 37 35
+39 40 39 63 64 60 99 98 80 121 119 87 137 133 100 177 172 135
+176 171 126 184 181 136 131 127 93 131 127 93 110 109 94 84 83 72
+51 52 50 39 40 39 27 29 28 18 22 22 16 19 19 15 19 19
+15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 11 14 14
+10 13 13 9 12 12 9 11 11 8 9 9 7 9 9 1 1 1
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
+230 229 82 230 229 82 236 236 101 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 96 95 69 71 71 57
+36 38 35 118 116 76 118 116 76 12 15 15 15 18 18 20 24 24
+33 37 35 55 56 53 84 83 72 110 109 94 145 141 105 110 109 94
+168 163 120 121 119 87 156 151 111 131 127 93 87 86 72 61 63 57
+47 48 46 28 31 30 18 22 22 15 19 19 15 18 18 15 19 19
+15 19 19 14 18 18 14 17 17 13 17 17 13 16 16 12 15 15
+11 13 13 10 12 12 9 11 11 8 10 10 7 9 9 3 3 3
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 1 1 0 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
+161 156 96 230 229 82 118 116 76 11 14 14 14 17 17 18 22 22
+27 30 29 40 43 41 60 60 56 84 83 72 105 104 92 110 109 94
+110 109 94 110 109 94 99 98 80 90 89 73 68 70 65 47 48 46
+32 34 33 23 25 24 20 23 23 17 21 21 15 19 19 14 17 17
+15 19 19 15 18 18 14 18 18 13 17 17 13 16 16 12 15 15
+11 14 14 10 12 12 9 11 11 8 10 10 7 9 9 4 5 5
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 161 156 96 118 116 76 11 13 13 13 16 16 15 19 19
+20 24 24 30 32 31 40 43 41 51 52 50 63 64 60 72 73 67
+65 66 61 65 66 61 65 66 61 55 57 54 46 47 45 33 37 35
+27 29 28 20 24 24 17 21 21 16 20 20 16 20 20 15 19 19
+15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
+11 14 14 10 13 13 9 12 12 8 10 10 7 9 9 6 7 7
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 53 55 47 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+161 156 96 118 116 76 53 55 47 10 13 13 12 15 15 14 17 17
+17 20 20 20 24 24 27 29 28 32 34 33 37 39 37 40 43 41
+43 45 43 41 42 42 35 37 36 30 32 31 28 31 30 23 27 26
+20 23 23 17 21 21 16 20 20 16 20 20 16 20 20 16 19 19
+15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
+11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 10 12 12
+1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 82 81 62 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
+118 116 76 82 81 62 13 14 12 10 13 13 12 15 15 13 17 17
+15 19 19 16 20 20 20 23 23 20 24 24 23 27 26 26 28 27
+26 28 27 26 28 27 23 27 26 18 22 22 20 23 23 17 21 21
+17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 19 19
+15 19 19 15 19 19 15 18 18 14 17 17 13 17 17 13 16 16
+12 15 15 12 14 14 12 14 14 12 14 14 12 14 14 23 24 24
+6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 118 116 76
+71 71 57 13 14 12 9 12 12 10 13 13 12 15 15 13 17 17
+15 18 18 15 19 19 16 20 20 17 21 21 17 21 21 18 22 22
+18 22 22 18 22 22 17 21 21 16 19 19 15 18 18 14 18 18
+16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+15 19 19 15 19 19 15 18 18 14 18 18 16 20 20 23 25 24
+17 21 21 25 27 26 47 48 46 47 48 46 51 52 50 72 73 67
+33 36 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 161 156 96 118 116 76 118 116 76 46 47 43
+9 11 11 9 11 11 10 12 12 11 13 13 12 15 15 14 17 17
+15 18 18 15 19 19 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+15 19 19 16 20 20 20 24 24 55 56 53 32 34 33 84 83 72
+90 89 73 110 109 94 110 109 94 105 104 92 110 109 94 110 109 94
+72 73 67 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 96 95 69 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 161 156 96 118 116 76 82 81 62 16 17 12 9 11 11
+9 11 11 9 12 12 10 13 13 12 14 14 13 16 16 14 18 18
+15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 19 19 33 36 34 99 98 80 156 151 111 145 141 105 184 179 149
+168 163 120 184 179 149 177 172 135 156 151 111 145 141 105 110 109 94
+90 89 73 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 71 71 57 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
+230 229 82 161 156 96 230 229 82 230 229 82 230 229 82 161 156 96
+118 116 76 82 81 62 30 31 28 9 11 11 9 11 11 9 11 11
+10 12 12 10 13 13 11 14 14 13 16 16 14 17 17 15 18 18
+15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+18 22 22 58 59 55 137 133 100 197 193 154 214 212 158 210 208 158
+197 193 154 184 179 149 184 179 149 137 133 100 110 109 94 99 98 80
+84 83 72 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
+161 156 96 161 156 96 161 156 96 161 156 96 118 116 76 71 71 57
+21 22 20 12 14 14 11 13 13 10 12 12 10 12 12 10 13 13
+11 13 13 12 15 15 13 16 16 14 17 17 14 18 18 15 19 19
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 17 21 21
+23 27 26 84 83 72 184 179 149 251 251 187 210 208 158 184 179 149
+184 179 149 156 151 111 110 109 94 84 83 72 63 64 60 51 52 50
+18 22 22 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
+230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
+161 156 96 161 156 96 118 116 76 53 55 47 20 23 22 16 19 19
+13 16 16 12 15 15 12 14 14 11 14 14 11 14 14 11 14 14
+12 15 15 13 16 16 14 17 17 15 19 19 16 20 20 17 21 21
+23 27 26 18 22 22 20 24 24 23 27 26 30 32 31 17 21 21
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+23 27 26 33 37 35 137 133 100 156 151 111 158 153 112 105 104 92
+105 104 92 68 70 65 39 40 39 18 22 22 12 14 14 12 15 15
+9 11 11 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 230 229 82
+230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 118 116 76
+118 116 76 66 65 55 43 45 43 32 34 33 25 27 26 20 23 22
+17 20 20 15 18 18 14 17 17 15 18 18 13 16 16 14 17 17
+14 18 18 16 20 20 32 34 33 55 57 54 58 59 55 72 73 67
+105 104 92 55 57 54 65 66 61 63 64 60 40 43 41 33 37 35
+41 42 42 20 24 24 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+17 21 21 26 28 27 30 32 31 35 37 36 68 70 65 39 40 39
+23 27 26 15 18 18 13 16 16 11 14 14 9 12 12 8 10 10
+7 9 9 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
+230 229 82 230 229 82 230 229 82 96 95 69 30 31 28 49 51 48
+90 89 73 68 70 65 55 57 54 47 48 46 47 48 46 43 45 43
+32 34 33 43 45 43 43 45 43 23 27 26 25 27 26 40 43 41
+40 43 41 90 89 73 110 109 94 145 141 105 156 151 111 156 151 111
+184 179 149 184 179 149 177 172 135 184 179 149 137 133 100 84 83 72
+105 104 92 63 64 60 49 51 48 47 48 46 28 31 30 18 22 22
+16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 15 19 19 15 19 19 15 19 19 18 22 22 15 19 19
+13 16 16 12 15 15 11 14 14 10 13 13 9 12 12 9 11 11
+8 10 10 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+30 31 28 230 229 82 71 71 57 2 2 1 0 0 0 58 59 55
+105 104 92 84 83 72 65 66 61 84 83 72 110 109 94 110 109 94
+145 141 105 105 104 92 110 109 94 110 109 94 84 83 72 110 109 94
+158 153 112 197 193 154 197 193 154 239 239 170 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 197 193 154
+197 193 154 184 179 149 145 141 105 137 133 100 105 104 92 47 48 46
+20 23 23 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 19 19 15 19 19 15 19 19 14 18 18 14 17 17
+13 17 17 13 16 16 12 14 14 12 14 14 13 13 13 13 13 13
+13 13 13 12 12 12 10 10 9 6 7 7 2 2 2 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 65 66 61
+105 104 92 84 83 72 84 83 72 110 109 94 184 179 149 210 208 158
+210 208 158 210 208 158 214 212 158 197 193 154 214 212 158 210 208 158
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 239 239 170 251 251 187 184 179 149 84 83 72
+26 28 27 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
+13 17 17 13 16 16 15 15 15 14 14 13 14 14 13 14 14 13
+13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 3 4 4
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 73 67
+105 104 92 99 98 80 84 83 72 99 98 80 177 172 135 197 193 154
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 214 212 158 197 193 154 99 98 80
+23 27 26 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
+14 17 17 16 16 16 16 16 16 16 16 16 15 15 15 14 14 13
+14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
+3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 84 83 72
+110 109 94 99 98 80 72 73 67 63 64 60 99 98 80 177 172 135
+184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 210 208 158 184 179 149 177 172 135 110 109 94 33 37 35
+17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+16 20 20 16 20 20 15 19 19 15 19 19 15 19 19 14 18 18
+15 18 18 18 19 18 18 19 18 17 17 17 16 16 16 15 15 15
+14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
+10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 105 104 92
+108 107 93 99 98 80 72 73 67 63 64 60 51 52 50 87 86 72
+105 104 92 110 109 94 108 107 93 156 151 111 184 179 149 184 179 149
+197 193 154 197 193 154 197 193 154 184 179 149 184 179 149 177 172 135
+197 193 154 156 151 111 177 172 135 184 179 149 168 163 120 137 133 100
+145 141 105 110 109 94 99 98 80 47 48 46 55 57 54 15 19 19
+16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
+17 20 20 17 21 21 16 20 20 16 19 19 15 19 19 16 19 19
+20 20 20 21 22 21 20 20 20 19 20 19 18 19 18 16 16 16
+15 15 15 14 14 13 13 13 13 13 13 13 12 12 12 12 12 12
+12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 58 59 55 110 109 94
+105 104 92 90 89 73 72 73 67 55 57 54 43 45 43 39 40 39
+43 45 43 46 47 45 43 45 43 68 70 65 65 66 61 63 64 60
+108 107 93 72 73 67 105 104 92 90 89 73 72 73 67 40 43 41
+72 73 67 68 70 65 68 70 65 58 59 55 63 64 60 49 51 48
+43 45 43 33 36 34 27 30 29 20 24 24 16 20 20 15 19 19
+15 19 19 15 19 19 15 19 19 16 19 19 16 20 20 16 20 20
+17 21 21 20 24 24 20 23 22 17 21 21 17 20 20 20 20 20
+21 22 21 21 22 21 21 22 21 21 22 21 20 20 20 18 19 18
+16 16 16 15 15 15 13 13 13 13 13 13 12 12 12 12 12 12
+12 12 12 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 21 22 21 110 109 94 110 109 94
+105 104 92 84 83 72 68 70 65 51 52 50 41 42 42 33 37 35
+28 31 30 23 27 26 20 23 23 18 22 22 17 20 20 25 27 26
+26 28 27 27 30 29 25 27 26 20 23 23 23 27 26 30 32 31
+20 24 24 17 21 21 18 22 22 15 19 19 26 28 27 20 23 23
+14 18 18 15 19 19 15 18 18 15 19 19 15 19 19 15 19 19
+15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 16 19 19
+16 20 20 22 24 23 24 26 24 22 24 23 20 23 22 22 24 23
+24 26 24 24 26 24 23 24 24 22 24 23 21 22 21 19 20 19
+17 17 17 15 15 15 14 14 13 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 2 2 2 99 98 80 110 109 94 108 107 93
+105 104 92 84 83 72 63 64 60 49 51 48 39 40 39 32 34 33
+27 30 29 23 25 24 20 23 23 17 20 20 15 19 19 14 18 18
+14 17 17 13 17 17 13 17 17 13 17 17 13 17 17 13 17 17
+14 17 17 14 17 17 14 17 17 14 17 17 14 17 17 14 17 17
+14 18 18 14 18 18 14 18 18 14 18 18 15 18 18 15 19 19
+15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 15 19 19
+15 19 19 17 21 21 27 29 28 26 28 27 25 27 26 25 27 26
+27 29 28 27 29 28 26 28 27 24 26 24 21 22 21 20 20 20
+18 19 18 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 51 52 50 110 109 94 110 109 94 105 104 92
+90 89 73 72 73 67 55 57 54 43 45 43 35 37 36 30 32 31
+26 28 27 20 24 24 17 21 21 16 19 19 15 18 18 14 17 17
+13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
+13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
+14 17 17 14 17 17 14 17 17 14 18 18 14 18 18 14 18 18
+15 18 18 15 18 18 15 19 19 15 19 19 15 19 19 15 19 19
+15 19 19 15 19 19 27 29 28 32 34 33 28 31 30 27 29 28
+30 32 31 30 32 31 30 31 28 26 28 27 23 24 24 21 22 21
+19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 3 3 3 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 10 10 9 108 107 93 110 109 94 108 107 93 99 98 80
+84 83 72 63 64 60 49 51 48 40 43 41 33 36 34 27 30 29
+23 27 26 18 22 22 17 20 20 15 18 18 14 17 17 13 16 16
+13 16 16 13 16 16 12 15 15 12 15 15 12 15 15 12 15 15
+13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
+13 17 17 13 17 17 14 17 17 14 17 17 14 17 17 14 18 18
+14 18 18 14 18 18 15 18 18 15 18 18 15 19 19 15 19 19
+15 19 19 15 19 19 17 21 21 33 36 34 32 34 33 31 33 31
+33 36 34 33 36 34 31 33 31 27 29 28 25 27 26 21 22 21
+19 20 19 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 63 64 60 137 133 100 43 45 43 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 68 70 65 110 109 94 110 109 94 105 104 92 84 83 72
+68 70 65 55 57 54 43 45 43 35 37 36 30 32 31 26 28 27
+20 24 24 17 21 21 16 19 19 14 17 17 13 16 16 12 15 15
+12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15
+12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
+13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
+14 17 17 14 17 17 14 18 18 14 18 18 14 18 18 15 18 18
+15 19 19 15 19 19 15 19 19 20 24 24 32 34 33 35 37 36
+37 39 37 35 37 36 33 36 34 30 32 31 26 28 27 22 24 23
+20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+1 1 1 99 98 80 184 179 149 184 179 149 68 70 65 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+15 15 15 110 109 94 110 109 94 108 107 93 99 98 80 72 73 67
+61 63 57 49 51 48 39 40 39 33 36 34 27 30 29 23 25 24
+18 22 22 16 19 19 14 17 17 13 16 16 12 15 15 12 15 15
+11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
+11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
+12 15 15 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
+13 17 17 14 17 17 14 17 17 14 17 17 14 18 18 14 18 18
+14 18 18 15 18 18 15 19 19 15 19 19 30 32 31 38 39 37
+39 40 39 39 40 39 35 37 36 31 33 31 27 29 28 22 24 23
+20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
+110 109 94 197 193 154 210 208 158 184 179 149 68 70 65 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+68 70 65 110 109 94 110 109 94 105 104 92 84 83 72 65 66 61
+51 52 50 43 45 43 35 37 36 30 32 31 25 27 26 20 23 23
+17 20 20 15 18 18 13 16 16 12 15 15 12 15 15 11 14 14
+11 14 14 11 14 14 11 13 13 11 13 13 11 13 13 11 13 13
+11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
+12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 13 16 16
+13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 14 17 17
+14 18 18 14 18 18 14 18 18 16 19 19 37 39 37 41 42 42
+41 42 42 41 42 42 38 39 37 32 34 33 27 29 28 23 24 24
+21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 137 133 100
+197 193 154 251 251 187 239 239 170 184 179 149 31 33 31 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 12
+110 109 94 110 109 94 105 104 92 90 89 73 72 73 67 58 59 55
+46 47 45 37 39 37 31 33 31 26 28 27 20 24 24 17 21 21
+15 18 18 13 16 16 12 15 15 12 14 14 11 13 13 11 13 13
+10 13 13 10 13 13 10 13 13 10 13 13 10 13 13 10 13 13
+10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
+11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
+13 16 16 13 16 16 13 16 16 13 16 16 13 17 17 13 17 17
+14 17 17 14 17 17 14 18 18 23 27 26 41 42 42 41 42 42
+43 45 43 41 42 42 39 40 39 33 36 34 27 29 28 23 24 24
+21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 27 29 28 168 163 120 210 208 158
+251 251 187 251 251 187 210 208 158 137 133 100 1 1 1 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 60 60 56
+110 109 94 105 104 92 105 104 92 84 83 72 65 66 61 51 52 50
+40 43 41 33 36 34 27 30 29 23 25 24 18 22 22 16 19 19
+14 17 17 12 15 15 11 14 14 11 14 14 10 13 13 10 13 13
+10 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
+10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
+11 13 13 11 14 14 11 14 14 11 14 14 11 14 14 12 15 15
+12 15 15 12 15 15 12 15 15 13 16 16 13 16 16 13 16 16
+13 17 17 13 17 17 14 17 17 32 34 33 43 45 43 43 45 43
+43 45 43 43 45 43 39 40 39 33 36 34 27 29 28 23 24 24
+21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 68 70 65 184 179 149 210 208 158 251 251 187
+251 251 187 214 212 158 184 179 149 37 39 37 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 105 104 92
+105 104 92 105 104 92 99 98 80 72 73 67 58 59 55 46 47 45
+35 37 36 30 32 31 25 27 26 20 23 23 16 19 19 14 17 17
+12 15 15 12 14 14 11 13 13 10 13 13 10 12 12 10 12 12
+10 12 12 10 12 12 9 12 12 9 12 12 9 12 12 9 12 12
+10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 13 13
+10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
+11 14 14 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
+13 16 16 13 16 16 17 20 20 41 42 42 46 47 45 46 47 45
+46 47 45 43 45 43 40 41 39 33 36 34 27 29 28 23 24 24
+20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+15 15 15 110 109 94 197 193 154 214 212 158 251 251 187 251 251 187
+239 239 170 184 179 149 84 83 72 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 47 48 46 105 104 92
+105 104 92 99 98 80 84 83 72 68 70 65 51 52 50 40 43 41
+32 34 33 27 29 28 22 24 23 17 21 21 15 18 18 13 16 16
+12 15 15 11 13 13 10 13 13 10 12 12 9 12 12 9 12 12
+9 12 12 9 12 12 9 11 11 9 11 11 9 11 11 9 11 11
+9 12 12 9 12 12 9 12 12 9 12 12 10 12 12 10 12 12
+10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
+11 14 14 11 14 14 11 14 14 12 14 14 12 15 15 12 15 15
+12 15 15 13 16 16 28 31 30 43 45 43 47 48 46 47 48 46
+47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
+20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 3 4 4 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 60 60 56
+177 172 135 197 193 154 251 251 187 251 251 187 251 251 187 251 251 187
+184 179 149 110 109 94 3 4 4 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 1 1 1 99 98 80 105 104 92
+99 98 80 87 86 72 84 83 72 63 64 60 46 47 45 35 37 36
+30 32 31 25 27 26 18 22 22 16 19 19 14 17 17 12 15 15
+11 14 14 10 13 13 9 12 12 9 12 12 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 12 12 9 12 12
+9 12 12 10 12 12 10 12 12 10 12 12 10 13 13 10 13 13
+10 13 13 11 13 13 11 14 14 11 14 14 11 14 14 12 15 15
+12 15 15 14 17 17 41 42 42 47 48 46 49 51 48 51 52 50
+47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
+19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 23 24 24 137 133 100 184 179 149
+210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 184 179 149
+110 109 94 13 13 13 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 30 32 31 105 104 92 99 98 80
+84 83 72 84 83 72 72 73 67 55 57 54 41 42 42 32 34 33
+27 29 28 20 24 24 17 20 20 14 17 17 13 16 16 12 14 14
+10 13 13 10 12 12 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 12 12 9 12 12 10 12 12 10 12 12 10 12 12
+10 13 13 10 13 13 10 13 13 11 13 13 11 14 14 11 14 14
+11 14 14 27 29 28 55 56 53 72 73 67 51 52 50 51 52 50
+49 51 48 43 45 43 39 40 39 32 34 33 26 28 27 21 22 21
+19 20 19 16 16 16 18 19 17 13 13 13 12 12 12 12 12 12
+12 12 12 12 12 12 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 8 8 7 84 83 72 184 179 149 197 193 154 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 184 179 149 145 141 105
+19 20 19 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 14 14 13 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 72 73 67 105 104 92 84 83 72
+72 73 67 84 83 72 68 70 65 49 51 48 39 40 39 30 32 31
+25 27 26 18 22 22 15 18 18 13 16 16 12 15 15 11 13 13
+10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 12 12 9 12 12 9 12 12
+10 12 12 10 12 12 10 12 12 10 13 13 10 13 13 11 13 13
+13 16 16 41 42 42 99 98 80 158 153 112 65 66 61 51 52 50
+49 51 48 43 45 43 39 40 39 31 33 31 25 27 26 21 22 21
+21 22 21 68 70 65 55 56 53 13 13 13 12 12 12 12 12 12
+12 12 12 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
+63 64 60 158 153 112 184 179 149 210 208 158 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 184 179 149 137 133 100 27 29 28
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+21 22 21 110 109 94 5 6 5 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 13 13 13 105 104 92 90 89 73 72 73 67
+68 70 65 84 83 72 63 64 60 46 47 45 35 37 36 27 29 28
+22 24 23 17 20 20 14 17 17 12 15 15 11 14 14 10 12 12
+10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 12 12 9 12 12 10 12 12 10 12 12 10 13 13 10 13 13
+30 32 31 47 48 46 177 172 135 210 208 158 137 133 100 55 56 53
+49 51 48 43 45 43 38 39 37 31 33 31 25 27 26 22 24 23
+110 109 94 184 179 149 63 64 60 13 13 13 12 12 12 12 12 12
+12 12 12 8 9 9 0 0 0 1 1 1 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 21 22 21 105 104 92
+184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 251 251 187 184 179 149 145 141 105 23 24 24 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+68 70 65 184 179 149 105 104 92 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 51 52 50 99 98 80 84 83 72 63 64 60
+68 70 65 72 73 67 55 57 54 41 42 42 32 34 33 25 27 26
+20 23 23 16 19 19 13 16 16 12 14 14 10 13 13 10 12 12
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 12 12 9 12 12 10 12 12 17 20 20
+46 47 45 72 73 67 210 208 158 251 251 187 210 208 158 63 64 60
+49 51 48 43 45 43 37 39 37 30 32 31 24 26 24 105 104 92
+210 208 158 197 193 154 47 48 46 13 13 13 12 12 12 12 12 12
+12 12 12 6 7 7 33 36 34 48 49 45 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 8 8 7 23 24 24 55 56 53 110 109 94
+210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 184 179 149 110 109 94 20 20 20 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+110 109 94 251 251 187 210 208 158 47 48 46 0 0 0 0 0 0
+0 0 0 1 1 1 90 89 73 90 89 73 72 73 67 55 56 53
+72 73 67 68 70 65 51 52 50 37 39 37 28 31 30 23 25 24
+17 21 21 15 18 18 12 15 15 11 14 14 10 13 13 9 12 12
+9 11 11 9 11 11 9 11 11 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 9 12 12 13 16 16 41 42 42
+49 51 48 110 109 94 251 251 187 251 251 187 251 251 187 105 104 92
+49 51 48 43 45 43 35 37 36 30 31 28 47 48 46 197 193 154
+251 251 187 197 193 154 31 33 31 12 12 12 12 12 12 12 12 12
+12 12 12 51 52 50 184 179 149 72 73 67 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2
+11 11 11 21 22 21 30 32 31 40 41 39 60 60 56 145 141 105
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
+184 179 149 110 109 94 13 13 13 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 4 5 4 61 61 53 48 49 45 3 4 3
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+156 151 111 251 251 187 251 251 187 184 179 149 11 11 11 0 0 0
+0 0 0 26 28 27 99 98 80 84 83 72 60 60 56 43 45 43
+72 73 67 65 66 61 49 51 48 35 37 36 27 29 28 20 24 24
+17 20 20 14 17 17 12 15 15 11 13 13 10 12 12 9 11 11
+9 11 11 9 11 11 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
+9 11 11 9 11 11 9 11 11 11 13 13 37 39 37 47 48 46
+51 52 50 184 179 149 251 251 187 251 251 187 251 251 187 145 141 105
+47 48 46 41 42 42 35 37 36 27 29 28 137 133 100 251 251 187
+251 251 187 197 193 154 19 20 19 12 12 12 12 12 12 12 12 12
+27 29 28 184 179 149 214 212 158 63 64 60 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 1 6 7 7 16 16 16 24 26 24
+30 32 31 38 39 37 47 48 46 55 57 54 68 70 65 110 109 94
+197 193 154 251 251 187 251 251 187 251 251 187 210 208 158 184 179 149
+105 104 92 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 65 66 61 184 179 149 156 151 111
+30 32 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+168 163 120 251 251 187 251 251 187 251 251 187 110 109 94 0 0 0
+0 0 0 60 60 56 84 83 72 68 70 65 51 52 50 38 39 37
+84 83 72 63 64 60 43 45 43 33 36 34 25 27 26 20 23 22
+15 18 18 13 16 16 12 14 14 10 13 13 9 12 12 9 11 11
+9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+9 11 11 9 11 11 10 12 12 33 36 34 46 47 45 51 52 50
+72 73 67 210 208 158 251 251 187 251 251 187 251 251 187 177 172 135
+47 48 46 41 42 42 35 37 36 37 39 37 184 179 149 251 251 187
+251 251 187 197 193 154 13 13 13 12 12 12 12 12 12 12 12 12
+110 109 94 251 251 187 251 251 187 37 39 37 0 0 0 0 0 0
+0 0 0 21 22 20 2 2 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+4 5 5 12 12 12 21 22 21 25 27 26 30 32 31 38 39 37
+46 47 45 55 56 53 60 60 56 65 66 61 68 70 65 105 104 92
+110 109 94 197 193 154 210 208 158 197 193 154 184 179 149 84 83 72
+2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 13 13 13 184 179 149 251 251 187
+197 193 154 43 44 41 0 0 0 0 0 0 0 0 0 0 0 0
+145 141 105 251 251 187 251 251 187 251 251 187 214 212 158 43 45 43
+2 2 2 84 83 72 72 73 67 58 59 55 41 42 42 38 39 37
+72 73 67 58 59 55 41 42 42 31 33 31 25 27 26 18 22 22
+14 17 17 12 15 15 12 14 14 10 12 12 9 12 12 9 11 11
+9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 9 12 12 31 33 31 43 45 43 49 51 48 55 56 53
+110 109 94 251 251 187 251 251 187 251 251 187 251 251 187 168 163 120
+47 48 46 41 42 42 33 36 34 63 64 60 197 193 154 251 251 187
+251 251 187 184 179 149 13 13 13 12 12 12 12 12 12 16 16 16
+197 193 154 251 251 187 239 239 170 20 20 20 0 0 0 2 2 1
+108 107 93 110 109 94 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 1 4 5 5 11 11 11 18 19 18
+22 24 23 26 28 27 32 34 33 39 40 39 46 47 45 51 52 50
+55 57 54 60 60 56 63 64 60 63 64 60 63 64 60 58 59 55
+63 64 60 99 98 80 145 141 105 137 133 100 43 45 43 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 3 4 3 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 110 109 94 251 251 187
+251 251 187 184 179 149 25 27 26 0 0 0 0 0 0 0 0 0
+99 98 80 251 251 187 251 251 187 251 251 187 251 251 187 156 151 111
+25 27 26 84 83 72 65 66 61 47 48 46 32 34 33 39 40 39
+72 73 67 55 57 54 40 41 39 30 32 31 23 25 24 18 22 22
+14 17 17 12 15 15 11 13 13 10 12 12 9 11 11 9 11 11
+9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+9 11 11 28 31 30 41 42 42 47 48 46 55 56 53 58 59 55
+137 133 100 251 251 187 251 251 187 251 251 187 210 208 158 137 133 100
+47 48 46 40 41 39 32 34 33 75 75 61 184 179 149 239 239 170
+251 251 187 177 172 135 13 13 13 12 12 12 12 12 12 43 44 41
+197 193 154 251 251 187 210 208 158 10 10 9 0 0 0 84 83 72
+251 251 187 84 83 72 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
+6 7 7 11 11 11 17 17 17 20 20 20 23 24 24 27 29 28
+32 34 33 38 39 37 43 45 43 47 48 46 51 52 50 55 56 53
+58 59 55 58 59 55 55 57 54 55 56 53 47 48 46 41 42 42
+35 37 36 31 33 31 47 48 46 14 14 13 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 66 65 55 99 98 80 20 20 20
+0 0 0 0 0 0 0 0 0 0 0 0 43 45 43 214 212 158
+251 251 187 251 251 187 145 141 105 3 3 3 0 0 0 0 0 0
+48 49 45 184 179 149 239 239 170 251 251 187 239 239 170 177 172 135
+84 83 72 72 73 67 55 56 53 39 40 39 26 28 27 39 40 39
+68 70 65 51 52 50 39 40 39 28 31 30 22 24 23 17 20 20
+14 17 17 12 14 14 10 13 13 9 11 11 9 11 11 9 11 11
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+27 29 28 40 41 39 46 47 45 51 52 50 55 57 54 63 64 60
+131 127 93 197 193 154 210 208 158 197 193 154 168 163 120 96 95 69
+47 48 46 40 41 39 32 34 33 71 71 57 145 141 105 184 179 149
+184 179 149 131 127 93 13 13 13 12 12 12 12 12 12 48 49 45
+168 163 120 184 179 149 156 151 111 6 7 7 14 14 13 177 172 135
+239 239 170 40 41 39 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 3 3 3 6 7 7 11 11 11 16 16 16
+18 19 18 21 22 21 23 24 24 27 29 28 32 34 33 37 39 37
+41 42 42 43 45 43 47 48 46 51 52 50 51 52 50 51 52 50
+51 52 50 49 51 48 46 47 45 40 41 39 32 34 33 25 27 26
+20 20 20 14 14 13 2 2 2 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 33 36 34 197 193 154 184 179 149
+41 42 42 0 0 0 0 0 0 0 0 0 3 3 3 184 179 149
+251 251 187 251 251 187 184 179 149 48 49 45 0 0 0 0 0 0
+16 17 12 121 119 87 177 172 135 194 189 146 188 184 146 145 141 105
+82 81 62 63 64 60 46 47 45 31 33 31 21 22 21 35 37 36
+68 70 65 51 52 50 37 39 37 27 30 29 22 24 23 17 20 20
+13 16 16 12 14 14 10 13 13 9 11 11 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 25 27 26
+38 39 37 43 45 43 51 52 50 55 56 53 60 60 56 63 64 60
+92 91 72 158 153 112 176 171 126 171 165 117 149 143 98 82 81 62
+44 46 43 38 39 37 30 32 31 71 71 57 131 127 93 160 154 106
+149 143 98 82 81 62 13 13 13 12 12 12 12 12 12 46 47 43
+121 119 87 134 131 96 96 95 69 7 7 6 38 39 37 131 127 93
+145 141 105 12 13 12 0 0 0 1 1 1 3 3 3 6 7 7
+10 10 9 12 12 12 14 14 13 16 16 16 18 19 18 21 22 21
+22 24 23 26 28 27 30 31 28 33 36 34 37 39 37 40 41 39
+41 42 42 43 45 43 46 47 45 46 47 45 46 47 45 43 45 43
+41 42 42 37 39 37 31 33 31 26 28 27 21 22 21 16 16 16
+6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 177 172 135 251 251 187
+197 193 154 27 29 28 0 0 0 0 0 0 0 0 0 110 109 94
+239 239 170 239 239 170 184 179 149 87 86 72 2 2 1 0 0 0
+1 1 1 82 81 62 142 137 94 165 161 109 165 161 109 131 127 93
+75 75 61 55 56 53 37 39 37 25 27 26 19 20 19 32 34 33
+65 66 61 49 51 48 35 37 36 27 29 28 20 23 23 16 19 19
+13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
+8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 22 24 23 35 37 36
+41 42 42 47 48 46 55 56 53 58 59 55 63 64 60 65 66 61
+71 71 57 131 127 93 160 154 106 160 154 106 142 137 94 82 81 62
+46 47 43 40 41 39 33 36 34 66 65 55 125 122 87 149 143 98
+142 137 94 82 81 62 17 17 17 18 19 17 14 14 13 46 47 43
+118 116 76 125 122 87 96 95 69 16 17 12 71 71 57 103 101 77
+82 81 62 11 11 11 11 11 11 13 13 13 14 14 13 14 14 13
+15 15 15 16 16 16 17 17 17 19 20 19 21 22 21 23 24 24
+26 28 27 27 29 28 31 33 31 33 36 34 35 37 36 38 39 37
+39 40 39 39 40 39 38 39 37 37 39 37 35 37 36 31 33 31
+27 29 28 24 26 24 21 22 21 17 17 17 12 12 12 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 68 70 65 251 251 187
+251 251 187 156 151 111 2 2 1 0 0 0 0 0 0 43 44 41
+177 172 135 184 179 149 158 153 112 103 101 77 19 20 18 0 0 0
+0 0 0 46 47 43 131 127 93 160 154 106 160 154 106 131 127 93
+71 71 57 43 45 43 30 32 31 21 22 21 16 16 16 26 28 27
+63 64 60 47 48 46 35 37 36 26 28 27 20 23 23 16 19 19
+13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
+7 9 9 7 9 9 8 9 9 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 20 20 20 33 36 34 40 41 39
+46 47 45 51 52 50 55 57 54 60 60 56 63 64 60 65 66 61
+66 65 55 118 116 76 151 147 98 165 161 109 151 147 98 121 119 87
+96 95 69 96 95 69 96 95 69 103 101 77 142 137 94 151 147 98
+142 137 94 103 101 77 82 81 62 82 81 62 82 81 62 96 95 69
+131 127 93 142 137 94 103 101 77 46 47 43 96 95 69 118 116 76
+71 71 57 14 14 13 14 14 13 15 15 15 15 15 15 16 16 16
+16 16 16 17 17 17 18 19 18 20 20 20 21 22 21 23 24 24
+25 27 26 27 29 28 30 31 28 30 32 31 31 33 31 31 33 31
+31 33 31 31 33 31 30 31 28 27 29 28 25 27 26 22 24 23
+20 20 20 16 16 16 13 13 13 6 7 7 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+58 59 55 68 70 65 8 8 7 0 0 0 10 10 9 210 208 158
+251 251 187 184 179 149 38 39 37 0 0 0 0 0 0 8 8 7
+103 101 77 149 143 98 149 143 98 118 116 76 40 41 39 25 27 25
+53 55 47 82 81 62 144 139 99 165 161 109 165 161 109 142 137 94
+71 71 57 35 37 36 24 26 24 18 19 18 15 15 15 22 24 23
+63 64 60 46 47 45 33 36 34 26 28 27 20 23 22 17 18 17
+12 15 15 11 13 13 10 12 12 9 11 11 8 10 10 8 10 10
+7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 16 16 16 30 31 28 35 37 36 41 42 42
+47 48 46 55 56 53 58 59 55 63 64 60 65 66 61 65 66 61
+61 61 53 103 101 77 151 147 98 171 165 117 171 165 117 168 163 120
+158 153 112 158 153 112 155 149 109 151 147 98 151 147 98 160 154 106
+151 147 98 149 143 98 142 137 94 149 143 98 149 143 98 149 143 98
+155 149 109 151 147 98 131 127 93 103 101 77 125 122 87 118 116 76
+71 71 57 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17
+17 17 17 17 17 17 18 19 18 19 20 19 20 20 20 21 22 21
+23 24 24 24 26 24 25 27 26 26 28 27 26 28 27 26 28 27
+25 27 26 24 26 24 22 24 23 21 22 21 19 20 19 16 16 16
+14 14 13 8 8 7 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+20 20 20 184 179 149 168 163 120 21 22 21 0 0 0 105 104 92
+177 172 135 145 141 105 71 71 57 0 0 0 0 0 0 0 0 0
+66 65 55 131 127 93 151 147 98 142 137 94 118 116 76 121 119 87
+145 141 105 158 153 112 176 171 126 178 174 128 176 171 126 149 145 103
+96 95 69 31 33 31 21 22 21 16 16 16 14 14 13 18 19 18
+60 60 56 46 47 45 33 36 34 25 27 26 21 22 21 15 18 18
+12 15 15 11 13 13 9 11 11 8 10 10 8 10 10 8 9 9
+7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 9 9
+8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 10 12 12 26 28 27 31 33 31 38 39 37 43 45 43
+51 52 50 55 56 53 60 60 56 63 64 60 65 66 61 68 70 65
+63 64 60 96 95 69 158 153 112 178 174 128 188 184 146 194 189 146
+194 189 146 188 184 146 184 181 136 176 171 126 171 165 117 173 167 111
+173 167 111 165 161 109 171 165 117 174 170 121 176 171 126 178 174 128
+178 174 128 174 170 121 160 154 106 149 143 98 149 143 98 125 122 87
+71 71 57 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17
+17 17 17 17 17 17 17 17 17 18 19 18 19 20 19 20 20 20
+21 22 21 21 22 21 21 22 21 22 24 23 21 22 21 21 22 21
+21 22 21 19 20 19 18 19 18 16 16 16 14 14 13 11 11 11
+3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 105 104 92 197 193 154 110 109 94 9 9 8 36 38 35
+121 119 87 131 127 93 96 95 69 18 19 17 30 31 28 66 65 55
+96 95 69 142 137 94 160 154 106 160 154 106 160 154 106 168 163 120
+184 181 136 194 191 148 197 193 154 197 193 154 194 189 146 168 163 120
+125 122 87 46 47 43 18 19 18 15 15 15 13 13 13 14 14 13
+55 57 54 43 45 43 32 34 33 25 27 26 18 22 22 17 17 17
+12 14 14 10 12 12 9 11 11 8 10 10 8 9 9 7 9 9
+6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
+7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 32 34 33 41 42 42 35 37 36 39 40 39 37 39 37
+35 37 36 55 57 54 60 60 56 63 64 60 65 66 61 65 66 61
+61 63 57 115 113 82 168 163 120 194 191 148 204 201 155 210 208 158
+210 208 158 210 208 158 197 193 154 194 189 146 186 182 128 176 171 126
+174 170 121 176 171 126 186 182 128 190 186 136 194 191 148 197 193 154
+197 193 154 188 184 146 181 176 137 174 170 121 165 161 109 142 137 94
+82 81 62 24 26 24 16 16 16 16 16 16 16 16 16 16 16 16
+17 17 17 17 17 17 17 17 17 17 17 17 18 19 18 19 20 19
+19 20 19 19 20 19 20 20 20 19 20 19 19 20 19 18 19 18
+17 17 17 15 15 15 13 13 13 12 12 12 6 7 7 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 17 18 17 137 133 100 115 113 82 53 55 47 19 20 18
+103 101 77 144 139 99 137 133 100 115 113 82 137 133 100 156 151 111
+158 153 112 164 159 111 171 165 117 174 170 121 178 174 128 194 189 146
+204 201 155 214 212 158 214 212 158 214 212 158 210 208 158 188 184 146
+158 153 112 87 86 72 17 17 17 13 13 13 13 13 13 15 15 15
+55 56 53 43 45 43 32 34 33 24 26 24 17 20 20 16 16 16
+12 14 14 10 12 12 8 10 10 8 10 10 7 9 9 6 8 8
+6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
+7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
+8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
+8 10 10 110 109 94 84 83 72 49 51 48 26 28 27 8 10 10
+8 9 9 51 52 50 58 59 55 63 64 60 63 64 60 63 64 60
+66 65 55 134 131 96 181 176 137 210 208 158 214 212 158 239 239 170
+239 239 170 224 223 159 210 208 158 204 201 155 194 189 146 186 182 128
+186 182 128 184 181 136 194 189 146 204 201 155 210 208 158 210 208 158
+210 208 158 210 208 158 197 193 154 190 186 136 176 171 126 155 149 109
+118 116 76 36 38 35 15 15 15 16 16 16 16 16 16 16 16 16
+16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 17 17 17
+17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 15 15 15
+13 13 13 12 12 12 8 8 7 2 2 2 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 53 55 47 103 101 77 96 95 69 53 55 47
+103 101 77 158 153 112 177 172 135 184 179 149 188 184 146 197 193 154
+194 189 146 190 186 136 184 181 136 184 181 136 194 189 146 210 208 158
+214 212 158 239 239 170 251 251 187 251 251 187 224 223 159 204 201 155
+177 172 135 121 119 87 30 31 28 13 13 13 12 12 12 39 40 39
+60 60 56 43 45 43 32 34 33 23 25 24 18 19 18 13 16 16
+13 13 13 9 11 11 8 10 10 8 9 9 6 8 8 6 8 8
+6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 7 9 9
+7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
+7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
+14 17 17 197 193 154 158 153 112 55 57 54 7 9 9 7 9 9
+8 10 10 51 52 50 58 59 55 60 60 56 63 64 60 63 64 60
+71 71 57 155 149 109 194 191 148 214 212 158 251 251 187 251 251 187
+251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 190 186 136
+190 186 136 194 189 146 204 201 155 210 208 158 224 223 159 239 239 170
+239 239 170 224 223 159 210 208 158 204 201 155 190 186 136 164 159 111
+125 122 87 40 41 39 15 15 15 15 15 15 15 15 15 15 15 15
+16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
+16 16 16 16 16 16 15 15 15 14 14 13 13 13 13 12 12 12
+8 9 9 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 21 22 20 96 95 69 125 122 87 121 119 87
+144 139 99 177 172 135 197 193 154 210 208 158 214 212 158 214 212 158
+210 208 158 204 201 155 194 191 148 194 189 146 204 201 155 214 212 158
+239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
+188 184 146 145 141 105 53 55 47 12 12 12 15 15 15 63 64 60
+63 64 60 41 42 42 31 33 31 23 24 24 17 18 17 12 15 15
+11 13 13 9 11 11 8 9 9 7 9 9 6 8 8 6 8 8
+6 7 7 6 7 7 6 8 8 6 8 8 6 8 8 6 8 8
+6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
+7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 8 7
+43 45 43 251 251 187 156 151 111 8 10 10 7 9 9 7 9 9
+21 22 21 51 52 50 55 56 53 55 57 54 58 59 55 58 59 55
+75 75 61 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 214 212 158 204 201 155 194 189 146
+190 186 136 197 193 154 210 208 158 224 223 159 251 251 187 251 251 187
+251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 176 171 126
+125 122 87 36 38 35 14 14 13 14 14 13 15 15 15 15 15 15
+15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
+15 15 15 14 14 13 13 13 13 12 12 12 10 10 9 3 4 4
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 7 7 5 71 71 57 131 127 93 158 153 112
+177 172 135 197 193 154 214 212 158 239 239 170 251 251 187 251 251 187
+238 237 168 210 208 158 204 201 155 197 193 154 204 201 155 214 212 158
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
+197 193 154 156 151 111 66 65 55 12 12 12 37 39 37 58 59 55
+58 59 55 41 42 42 31 33 31 22 24 23 17 17 17 12 14 14
+10 12 12 8 10 10 6 8 8 6 8 8 6 7 7 6 7 7
+6 7 7 5 7 7 6 7 7 6 7 7 6 8 8 6 8 8
+6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
+7 9 9 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
+61 63 57 197 193 154 16 19 19 6 8 8 6 8 8 8 9 9
+41 42 42 47 48 46 51 52 50 51 52 50 55 56 53 55 56 53
+71 71 57 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
+251 251 187 251 251 187 239 239 170 214 212 158 204 201 155 194 189 146
+190 186 136 197 193 154 210 208 158 239 239 170 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 224 223 159 204 201 155 177 172 135
+121 119 87 30 31 28 13 13 13 14 14 13 14 14 13 14 14 13
+14 14 13 14 14 13 15 15 15 15 15 15 14 14 13 13 13 13
+12 12 12 12 12 12 10 10 9 4 5 5 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 48 49 45 131 127 93 174 170 121
+194 189 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
+251 251 187 214 212 158 204 201 155 197 193 154 204 201 155 210 208 158
+239 239 170 251 251 187 251 251 187 251 251 187 239 239 170 214 212 158
+194 191 148 156 151 111 71 71 57 19 20 19 51 52 50 51 52 50
+51 52 50 41 42 42 30 32 31 21 22 21 17 17 17 13 13 13
+9 11 11 8 9 9 6 8 8 6 7 7 6 7 7 5 7 7
+5 6 5 5 6 5 5 7 7 5 7 7 6 7 7 6 7 7
+6 8 8 6 8 8 6 8 8 6 7 7 6 7 7 6 7 7
+6 7 7 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
+55 56 53 43 45 43 6 8 8 6 8 8 6 8 8 47 48 46
+60 60 56 47 48 46 46 47 45 47 48 46 38 39 37 10 12 12
+66 65 55 145 141 105 197 193 154 214 212 158 251 251 187 251 251 187
+251 251 187 251 251 187 224 223 159 210 208 158 194 191 148 184 181 136
+184 181 136 194 189 146 204 201 155 224 223 159 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 181 176 137
+115 113 82 21 22 20 13 13 13 13 13 13 13 13 13 13 13 13
+14 14 13 13 13 13 13 13 13 13 13 13 12 12 12 11 11 11
+10 10 9 6 7 7 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 2 2 1 66 65 55 144 139 99 178 174 128
+204 201 155 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 214 212 158 204 201 155 194 191 148 197 193 154 204 201 155
+214 212 158 239 239 170 239 239 170 239 239 170 214 212 158 210 208 158
+184 181 136 149 145 103 66 65 55 41 42 42 47 48 46 46 47 45
+43 45 43 39 40 39 28 31 30 21 22 21 16 16 16 10 12 12
+8 10 10 6 8 8 6 7 7 6 7 7 5 6 5 5 6 5
+5 6 5 5 6 5 5 6 5 5 6 5 5 7 7 5 7 7
+6 7 7 6 7 7 6 7 7 5 7 7 5 7 7 5 7 7
+5 7 7 6 7 7 6 7 7 6 7 7 6 7 7 6 8 8
+6 8 8 6 8 8 6 7 7 6 7 7 46 47 45 156 151 111
+105 104 92 58 59 55 43 45 43 32 34 33 6 8 8 6 8 8
+49 51 48 125 122 87 181 176 137 204 201 155 214 212 158 239 239 170
+239 239 170 214 212 158 210 208 158 197 193 154 181 176 137 176 171 126
+176 171 126 184 181 136 197 193 154 210 208 158 239 239 170 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
+99 98 80 13 13 13 12 12 12 12 12 12 13 13 13 12 12 12
+12 12 12 12 12 12 11 11 11 11 11 11 8 9 9 4 5 5
+1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 1 1 0 61 61 53 142 137 94 181 176 137
+204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
+251 251 187 214 212 158 197 193 154 190 186 136 184 181 136 188 184 146
+197 193 154 204 201 155 210 208 158 210 208 158 204 201 155 194 189 146
+176 171 126 134 131 96 66 65 55 43 45 43 41 42 42 39 40 39
+35 37 36 33 36 34 27 29 28 20 20 20 15 15 15 9 11 11
+8 9 9 6 7 7 5 6 5 5 6 5 4 5 5 4 5 5
+4 5 5 4 5 5 4 5 5 4 5 5 5 6 5 4 5 5
+4 5 5 5 6 5 4 5 5 5 6 5 5 6 5 5 6 5
+5 7 7 5 7 7 5 7 7 5 7 7 5 7 7 5 7 7
+6 7 7 6 7 7 6 7 7 28 31 30 184 179 149 184 179 149
+145 141 105 84 83 72 27 29 28 5 7 7 5 6 5 16 16 16
+43 44 41 96 95 69 158 153 112 188 184 146 204 201 155 210 208 158
+204 201 155 197 193 154 184 179 149 177 172 135 168 163 120 164 159 111
+164 159 111 174 170 121 184 181 136 197 193 154 214 212 158 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
+71 71 57 11 11 11 12 12 12 11 11 11 11 11 11 11 11 11
+10 10 9 10 10 9 8 8 7 3 4 4 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 31 33 31 121 119 87 176 171 126
+197 193 154 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
+239 239 170 210 208 158 194 189 146 178 174 128 174 170 121 176 171 126
+177 172 135 181 176 137 184 179 149 184 179 149 181 176 137 178 174 128
+158 153 112 121 119 87 53 55 47 37 39 37 33 36 34 30 32 31
+27 29 28 25 27 26 24 26 24 19 20 19 13 13 13 8 10 10
+6 8 8 6 7 7 5 6 5 4 5 5 4 5 5 4 5 5
+4 5 5 4 5 5 4 5 5 3 4 4 3 4 4 4 5 5
+4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
+5 6 5 5 6 5 5 6 5 5 6 5 5 6 5 5 6 5
+5 6 5 5 6 5 12 14 14 145 141 105 184 179 149 177 172 135
+90 89 73 21 22 21 5 6 5 5 6 5 4 5 5 37 39 37
+38 39 37 61 61 53 134 131 96 168 163 120 184 181 136 188 184 146
+184 179 149 177 172 135 168 163 120 164 159 111 155 149 109 151 147 98
+151 147 98 164 159 111 176 171 126 184 179 149 210 208 158 239 239 170
+251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 158 153 112
+46 47 43 10 10 9 10 10 9 10 10 9 8 9 9 8 9 9
+6 7 7 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 13 12 7 82 81 62 158 153 112
+188 184 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
+224 223 159 204 201 155 184 181 136 171 165 117 164 159 111 160 154 106
+158 153 112 164 159 111 168 163 120 168 163 120 168 163 120 164 159 111
+142 137 94 96 95 69 43 44 41 27 29 28 26 28 27 23 24 24
+21 22 21 18 19 18 17 17 17 18 19 18 13 13 13 8 8 7
+6 7 7 5 6 5 4 5 5 3 4 4 3 4 4 3 4 4
+3 4 4 3 4 4 3 3 3 3 3 3 3 4 4 3 4 4
+3 4 4 3 4 4 4 5 5 4 5 5 4 5 5 4 5 5
+4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
+4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
+4 5 5 4 5 5 4 5 5 4 5 5 31 33 31 65 66 61
+37 39 37 38 39 37 96 95 69 144 139 99 168 163 120 174 170 121
+168 163 120 164 159 111 155 149 109 149 145 103 149 143 98 142 137 94
+149 143 98 151 147 98 164 159 111 177 172 135 197 193 154 210 208 158
+251 251 187 251 251 187 251 251 187 239 239 170 197 193 154 137 133 100
+24 26 24 8 9 9 8 9 9 8 8 7 6 7 7 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 46 47 43 125 122 87
+176 171 126 197 193 154 210 208 158 239 239 170 251 251 187 239 239 170
+214 212 158 197 193 154 181 176 137 164 159 111 151 147 98 149 143 98
+149 143 98 149 143 98 149 145 103 155 149 109 160 154 106 149 143 98
+118 116 76 82 81 62 30 31 28 21 22 21 19 20 19 17 17 17
+14 14 13 12 12 12 10 10 9 12 12 12 10 12 12 6 8 8
+4 5 5 3 4 4 3 4 4 3 4 4 3 3 3 3 3 3
+3 3 3 3 3 3 3 3 3 3 3 3 2 3 3 2 3 3
+3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 4 5 5
+4 5 5 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
+4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
+4 5 5 3 4 4 3 4 4 23 24 24 110 109 94 72 73 67
+39 40 39 22 24 23 46 47 43 103 101 77 142 137 94 155 149 109
+160 154 106 155 149 109 149 143 98 142 137 94 142 137 94 142 137 94
+142 137 94 149 143 98 155 149 109 176 171 126 184 179 149 210 208 158
+239 239 170 251 251 187 251 251 187 214 212 158 184 179 149 105 104 92
+10 10 9 6 7 7 3 4 4 1 1 1 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 12 12 9 82 81 62
+149 145 103 181 176 137 197 193 154 210 208 158 214 212 158 214 212 158
+210 208 158 197 193 154 177 172 135 158 153 112 149 143 98 142 137 94
+142 137 94 142 137 94 149 143 98 151 147 98 151 147 98 131 127 93
+103 101 77 71 71 57 22 24 23 15 15 15 13 13 13 11 11 11
+8 9 9 6 7 7 6 7 7 4 5 5 8 9 9 6 7 7
+4 5 5 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2
+2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3
+2 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
+3 4 4 3 4 4 3 3 3 3 4 4 3 4 4 3 4 4
+3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
+3 4 4 3 4 4 21 22 21 145 141 105 145 141 105 72 73 67
+17 18 17 3 4 4 21 22 20 66 65 55 118 116 76 142 137 94
+149 143 98 151 147 98 149 143 98 142 137 94 142 137 94 142 137 94
+142 137 94 149 143 98 155 149 109 168 163 120 184 179 149 210 208 158
+239 239 170 251 251 187 251 251 187 210 208 158 177 172 135 71 71 57
+3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
+115 113 82 158 153 112 181 176 137 197 193 154 204 201 155 210 208 158
+204 201 155 188 184 146 177 172 135 164 159 111 149 145 103 142 137 94
+142 137 94 142 137 94 149 143 98 151 147 98 149 143 98 125 122 87
+96 95 69 61 61 53 16 17 12 8 9 9 8 8 7 6 7 7
+4 5 5 3 4 4 3 3 3 3 3 3 3 3 3 5 6 5
+3 4 4 2 3 3 2 2 2 2 2 2 2 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2
+2 2 2 2 2 2 2 3 3 2 3 3 2 3 3 2 3 3
+3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
+3 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
+3 4 4 3 4 4 3 4 4 8 9 9 8 8 7 3 3 3
+3 3 3 3 3 3 9 9 8 36 38 35 82 81 62 118 116 76
+142 137 94 151 147 98 151 147 98 151 147 98 149 143 98 149 143 98
+149 143 98 151 147 98 160 154 106 176 171 126 188 184 146 210 208 158
+239 239 170 251 251 187 239 239 170 210 208 158 156 151 111 31 33 31
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
+66 65 55 125 122 87 158 153 112 181 176 137 194 189 146 197 193 154
+197 193 154 184 179 149 177 172 135 168 163 120 156 151 111 151 147 98
+151 147 98 151 147 98 151 147 98 161 156 96 149 143 98 118 116 76
+82 81 62 53 55 47 12 12 9 4 5 5 3 4 4 3 3 3
+3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 2 2
+3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
+1 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2 3 3
+2 3 3 2 3 3 2 3 3 2 3 3 2 2 2 2 2 2
+2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
+2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 3 3 3
+3 3 3 3 3 3 72 73 67 61 61 53 53 55 47 96 95 69
+131 127 93 151 147 98 161 156 96 161 156 96 151 147 98 151 147 98
+161 156 96 160 154 106 164 159 111 177 172 135 197 193 154 210 208 158
+239 239 170 251 251 187 224 223 159 197 193 154 131 127 93 9 9 8
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+24 26 24 82 81 62 131 127 93 164 159 111 178 174 128 188 184 146
+188 184 146 188 184 146 181 176 137 176 171 126 168 163 120 164 159 111
+160 154 106 160 154 106 160 154 106 160 154 106 151 147 98 125 122 87
+82 81 62 61 61 53 12 12 9 3 3 3 3 3 3 2 2 2
+2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
+0 0 0 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 1 2 2
+1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
+2 3 3 30 32 31 72 73 67 31 33 31 36 38 35 82 81 62
+118 116 76 149 143 98 161 156 96 161 156 96 161 156 96 160 154 106
+165 161 109 165 161 109 176 171 126 188 184 146 204 201 155 214 212 158
+239 239 170 239 239 170 214 212 158 184 179 149 82 81 62 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+2 2 2 43 44 41 96 95 69 131 127 93 160 154 106 176 171 126
+184 181 136 184 181 136 184 181 136 181 176 137 178 174 128 174 170 121
+171 165 117 173 167 111 173 167 111 173 167 111 160 154 106 131 127 93
+96 95 69 66 65 55 16 17 12 2 2 2 1 1 1 1 1 1
+1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 10 9 6 30 31 28 71 71 57
+118 116 76 149 143 98 165 161 109 165 161 109 165 161 109 173 167 111
+173 167 111 176 171 126 184 181 136 197 193 154 210 208 158 224 223 159
+251 251 187 239 239 170 210 208 158 168 163 120 40 41 39 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 13 12 7 61 61 53 96 95 69 131 127 93 160 154 106
+176 171 126 184 181 136 184 181 136 188 184 146 184 181 136 184 181 136
+184 181 136 186 182 128 186 182 128 178 174 128 174 170 121 149 145 103
+118 116 76 82 81 62 21 22 20 1 1 1 1 1 1 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2
+1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
+2 2 2 2 2 2 2 2 2 3 3 3 30 31 28 66 65 55
+118 116 76 149 143 98 165 161 109 173 167 111 173 167 111 174 170 121
+186 182 128 190 186 136 197 193 154 210 208 158 224 223 159 251 251 187
+251 251 187 239 239 170 197 193 154 137 133 100 12 12 9 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 30 31 28 71 71 57 103 101 77 134 131 96
+164 159 111 176 171 126 184 181 136 188 184 146 194 189 146 197 193 154
+197 193 154 197 193 154 194 191 148 194 189 146 190 186 136 176 171 126
+145 141 105 103 101 77 40 41 39 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
+1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2
+1 2 2 1 2 2 1 2 2 1 2 2 30 31 28 71 71 57
+118 116 76 160 154 106 173 167 111 178 174 128 186 182 128 190 186 136
+194 191 148 204 201 155 210 208 158 224 223 159 251 251 187 251 251 187
+251 251 187 214 212 158 184 179 149 84 83 72 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 5 5 3 43 44 41 82 81 62 103 101 77
+142 137 94 165 161 109 178 174 128 190 186 136 197 193 154 204 201 155
+210 208 158 210 208 158 210 208 158 210 208 158 210 208 158 197 193 154
+177 172 135 145 141 105 79 78 62 5 4 3 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 2 2 1 2 2 30 31 28 82 81 62
+142 137 94 165 161 109 178 174 128 190 186 136 194 191 148 204 201 155
+210 208 158 214 212 158 239 239 170 251 251 187 251 251 187 251 251 187
+251 251 187 210 208 158 168 163 120 36 38 35 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 16 17 12 53 55 47 82 81 62
+118 116 76 151 147 98 171 165 117 184 181 136 194 191 148 210 208 158
+214 212 158 224 223 159 239 239 170 239 239 170 224 223 159 214 212 158
+197 193 154 176 171 126 115 113 82 24 26 24 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 40 41 39 103 101 77
+151 147 98 176 171 126 190 186 136 197 193 154 210 208 158 214 212 158
+239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+239 239 170 197 193 154 110 109 94 3 4 3 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 30 31 28 66 65 55
+96 95 69 125 122 87 160 154 106 178 174 128 194 189 146 204 201 155
+214 212 158 239 239 170 251 251 187 251 251 187 251 251 187 239 239 170
+210 208 158 188 184 146 149 145 103 61 61 53 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 61 61 53 131 127 93
+164 159 111 184 181 136 197 193 154 210 208 158 224 223 159 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
+210 208 158 168 163 120 43 44 41 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 4 3 2 36 38 35
+71 71 57 96 95 69 142 137 94 165 161 109 184 181 136 197 193 154
+210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 251 251 187
+214 212 158 197 193 154 168 163 120 103 101 77 7 7 5 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+1 1 1 0 0 0 0 0 0 0 0 0 82 81 62 142 137 94
+174 170 121 194 189 146 210 208 158 224 223 159 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 224 223 159
+184 179 149 99 98 80 3 3 3 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
+43 44 41 82 81 62 118 116 76 142 137 94 171 165 117 190 186 136
+204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
+214 212 158 197 193 154 174 170 121 125 122 87 30 31 28 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
+1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 3 4 3 82 81 62 149 143 98
+176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 251 251 187 239 239 170 204 201 155
+145 141 105 30 31 28 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+10 9 6 46 47 43 82 81 62 118 116 76 149 143 98 174 170 121
+194 189 146 210 208 158 224 223 159 251 251 187 251 251 187 224 223 159
+210 208 158 194 191 148 174 170 121 134 131 96 53 55 47 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
+176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
+251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 177 172 135
+75 75 61 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 10 9 6 46 47 43 82 81 62 118 116 76 149 143 98
+176 171 126 194 191 148 210 208 158 214 212 158 214 212 158 210 208 158
+197 193 154 184 181 136 164 159 111 131 127 93 53 55 47 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
+174 170 121 194 189 146 204 201 155 214 212 158 239 239 170 251 251 187
+251 251 187 251 251 187 239 239 170 210 208 158 184 179 149 110 109 94
+12 12 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 10 9 6 43 44 41 82 81 62 115 113 82
+144 139 99 168 163 120 188 184 146 197 193 154 197 193 154 194 189 146
+184 181 136 174 170 121 151 147 98 118 116 76 36 38 35 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 4 3 2 82 81 62 142 137 94
+171 165 117 186 182 128 194 191 148 210 208 158 214 212 158 224 223 159
+239 239 170 224 223 159 210 208 158 184 179 149 137 133 100 36 38 35
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 5 36 38 35 71 71 57
+103 101 77 131 127 93 155 149 109 168 163 120 168 163 120 168 163 120
+164 159 111 149 143 98 125 122 87 82 81 62 13 12 7 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 61 61 53 125 122 87
+160 154 106 174 170 121 184 181 136 194 189 146 204 201 155 210 208 158
+210 208 158 204 201 155 184 179 149 145 141 105 61 61 53 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 3 3 2 30 31 28
+61 61 53 82 81 62 103 101 77 121 119 87 125 122 87 125 122 87
+118 116 76 103 101 77 79 78 62 24 26 24 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 25 27 25 96 95 69
+142 137 94 160 154 106 171 165 117 178 174 128 184 181 136 184 181 136
+181 176 137 177 172 135 145 141 105 75 75 61 5 5 3 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+16 17 12 40 41 39 61 61 53 71 71 57 71 71 57 71 71 57
+66 65 55 43 44 41 12 12 9 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 46 47 43
+96 95 69 125 122 87 142 137 94 149 145 103 155 149 109 155 149 109
+145 141 105 121 119 87 66 65 55 7 7 5 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 16 17 12 24 26 24 25 27 25 19 20 18
+7 7 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 1
+25 27 25 61 61 53 82 81 62 96 95 69 96 95 69 82 81 62
+61 61 53 25 27 25 2 2 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 5 6 5 13 12 7 10 9 6 3 4 3
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0
diff --git a/drivers/video/logo/logo_linux_vga16.ppm b/drivers/video/logo/logo_linux_vga16.ppm
index 1850c15..12ac3a54 100644
--- a/drivers/video/logo/logo_linux_vga16.ppm
+++ b/drivers/video/logo/logo_linux_vga16.ppm
@@ -1,1604 +1,2739 @@
P3
-# Standard 16-color Linux logo
-80 80
+142 114
255
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 85 85 85 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 170 170 170 0 0 0 85 85 85
-170 170 170 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-170 170 170 0 0 0 0 0 0 170 170 170
- 85 85 85 85 85 85 85 85 85 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0
- 85 85 85 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 170 170 170 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 170 170 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 85 85 85 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 0 0 0
- 0 0 0 0 0 0 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 170 170
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
- 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 0 0 0 85 85 85
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 85 85 85
- 0 0 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 85 85 85 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 85 85 85 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 85 85 85 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 85 85 85 85 85 85 0 0 0
- 0 0 0 85 85 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 85 85 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 170 170 170 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 85 85 85 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 170 170 170 85 85 85 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 85 85 85 85 85 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170
- 85 85 85 0 0 0 0 0 0 170 85 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 85 85 85
- 0 0 0 0 0 0 0 0 0 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 85 85 85
- 85 85 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 85 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 85 85 85 170 85 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 170 85 0 170 85 0 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 85 85 85 85 85 85 85 85 85
- 85 85 85 85 85 85 85 85 85 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-170 85 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 170 85 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 255 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 170 85 0
- 85 85 85 85 85 85 85 85 85 85 85 85
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 85 85 85
- 85 85 85 85 85 85 85 85 85 170 85 0
-170 85 0 170 85 0 170 85 0 255 255 85
-170 85 0 255 255 85 170 85 0 170 85 0
-170 85 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 170 85 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 85 0 170 85 0 170 85 0
-170 85 0 170 85 0 170 85 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
- 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+255 255 85 170 170 170 170 170 170 170 85 0 85 255 85 170 85 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 170 85 0
+170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 170 170 170
+170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 255 85
+255 85 85 85 255 85 170 170 170 170 85 0 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 85 85 85
+170 170 170 170 85 0 170 170 170 85 85 85 170 85 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
+85 85 85 85 85 85 170 85 0 85 255 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 170 85 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 170 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 85 0 85 255 85 170 85 0 170 85 0 170 85 0 85 255 85
+170 85 0 170 85 0 0 170 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 170 85 0
+255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 170 85 0
+255 255 85 85 255 85 170 85 0 170 85 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
+85 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
+255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
+255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 85 255 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
+255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
+255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 85 0 255 255 85 85 255 85 255 255 85
+170 170 170 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
+85 255 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 255 255 85
+255 255 255 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 0 170 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 170 85 0 85 255 85 255 255 85 170 170 170 255 255 255
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
+255 255 85 85 255 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 255 255 85 255 255 85 255 255 85 255 255 255 255 255 85
+255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 85 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
+255 255 85 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 170 85 0 255 255 85 255 255 85 255 255 255 170 170 170
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
+255 255 85 85 255 85 170 85 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+255 255 85 85 255 85 255 255 85 170 170 170 255 255 255 255 255 85
+255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 85 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
+85 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 0
+170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 85 255 85 255 255 85 170 85 0 170 85 0
+170 85 0 85 255 85 255 255 85 85 85 85 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 255 85 170 170 170 170 170 170
+85 85 85 170 170 170 170 170 170 170 85 0 170 170 170 170 170 170
+85 255 85 170 170 170 170 85 0 170 170 170 85 255 85 255 85 85
+85 255 85 170 170 170 255 255 85 85 85 85 255 255 85 170 170 170
+85 255 85 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 255 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
+255 255 85 255 255 85 255 255 85 170 85 0 0 170 0 85 85 85
+170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 255 85
+255 85 85 85 255 85 85 85 85 255 85 85 85 85 85 170 170 170
+170 85 0 170 170 170 85 85 85 85 255 85 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
+170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 170 85 0 255 255 85 85 85 85 85 85 85
+255 255 85 170 170 170 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 85 85 85 170 170 170 170 85 0 170 170 170
+170 170 170 255 255 85 170 170 170 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 170 85 0 170 85 0 0 170 0
+0 0 0 170 85 0 170 85 0 0 170 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
+170 170 170 85 85 85 85 85 85 170 170 170 170 85 0 85 85 85
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
+255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
+170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
+170 85 0 255 255 85 170 85 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 255 255 85
+255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
+85 255 85 170 85 0 0 170 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 170 0 170 85 0 255 255 85
+85 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
+85 255 85 170 85 0 170 85 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 170 85 0
+255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
+170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 85 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 170 85 0
+0 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
+255 255 85 85 255 85 170 85 0 170 85 0 85 255 85 170 85 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 85 255 85
+255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 255 255 85
+170 85 0 170 85 0 85 255 85 170 85 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 255 255 85
+170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 85 255 85 170 85 0 255 255 85 170 85 0 85 255 85
+170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 85 255 85
+170 85 0 255 255 85 170 85 0 85 255 85 170 85 0 170 85 0
+0 170 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
+170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 255 85 255 255 85
+170 85 0 255 255 85 255 255 85 170 85 0 85 255 85 170 85 0
+255 255 85 170 85 0 0 170 0 170 85 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 170 85 0
+0 170 0 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+255 255 85 255 255 85 170 85 0 0 170 0 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 85 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 170 85 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
+255 255 255 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
+255 255 255 255 255 255 170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 170 170 170
+170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
+255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 170 170 170
+170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+170 170 170 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 255 255 255 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
+170 170 170 255 255 255 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
+255 255 255 255 255 255 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255
+255 255 255 170 170 170 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 170 170 170 255 255 255 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 170 170 170 255 255 255 170 170 170 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 255 255 255 255 255 255 255 255 255 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
+255 255 255 170 170 170 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
+170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
+0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
+0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 170 170 170 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
+0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
+170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 255 255 255 255 255 255 0 0 0 0 0 0 85 85 85
+255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 85 85 85
+85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 170 170 170
+170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
+255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 170 170 170 255 255 85 85 85 85
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
+85 85 85 170 170 170 170 170 170 170 170 170 170 85 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 170 85 0
+170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 85 85 85
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 170 85 0 85 255 85 170 85 0 170 170 170 85 85 85
+85 85 85 0 0 0 0 0 0 85 85 85 170 85 0 85 255 85
+170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+85 85 85 85 85 85 170 85 0 0 0 0 85 85 85 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 170 85 0 170 170 170 170 85 0
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 255 85 85 170 170 170 85 255 85 170 85 0
+85 85 85 85 85 85 170 85 0 85 85 85 170 170 170 85 85 85
+170 170 170 170 85 0 85 85 85 85 85 85 85 85 85 85 85 85
+170 85 0 85 255 85 85 85 85 85 85 85 85 85 85 170 85 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 85 0 170 170 170 170 85 0 85 85 85 0 0 0
+85 85 85 85 85 85 85 255 85 170 170 170 170 170 170 170 85 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 85 255 85 255 85 85 170 170 170 170 170 170
+170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 85 0
+170 170 170 85 85 85 85 255 85 170 85 0 170 170 170 170 85 0
+170 170 170 170 170 170 170 85 0 85 85 85 85 85 85 85 255 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 170 170 170 170 170 170 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 255 255 85 85 85 85 85 85 85 85 85 85
+85 255 85 255 85 85 170 170 170 170 85 0 170 170 170 85 255 85
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 170 85 0 170 170 170 170 170 170 255 255 85
+170 170 170 255 85 85 170 170 170 170 170 170 255 255 85 170 170 170
+85 255 85 170 170 170 255 85 85 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 85 85 85
+85 85 85 170 85 0 85 85 85 0 0 0 85 85 85 85 85 85
+85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
+170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 85 85
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
+170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
+170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 85
+170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 85 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 85 85 85 85 85 85 0 0 0
+85 85 85 85 85 85 170 170 170 85 85 85 170 170 170 170 85 0
+170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 170 170
+255 255 85 170 170 170 170 170 170 255 255 255 255 255 85 170 170 170
+255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 255
+170 170 170 255 255 255 255 255 85 170 170 170 255 255 85 170 170 170
+255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 255 85 85 170 170 170 170 170 170
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 85 85 85
+85 85 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
+255 255 85 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
+170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 255 85 170 170 170 255 255 85 255 255 255 255 255 255
+255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 255 255 255
+255 255 85 255 255 255 255 255 85 170 170 170 170 170 170 170 85 0
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
+170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
+255 255 255 255 255 255 255 255 85 255 255 255 255 255 255 170 170 170
+255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 170 170 170 170 170 170 170 170 170 255 255 255 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 255 255 85
+170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 85 170 170 170 255 255 85
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
+255 255 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
+255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 255 255 255
+170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
+85 85 85 170 85 0 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 255 255 85 255 255 255 255 255 255
+170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 255 85 170 170 170
+170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 255 255 255
+170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 255 255 85
+170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
+255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 255 255 85
+170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 255 255 85
+85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
+255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+85 85 85 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
+255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
+255 85 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
+170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 170 170
+255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 85
+170 170 170 170 85 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
+170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
+255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
+85 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 85
+170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
+255 255 255 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
+85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 85 255 85
+255 85 85 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
+255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
+170 170 170 170 170 170 255 255 85 170 170 170 255 85 85 85 255 85
+170 170 170 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
+170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 85 85 85 85 85 85 85 85 85 170 170 170 255 255 85
+170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
+170 170 170 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
+170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
+255 255 255 170 170 170 170 170 170 170 85 0 170 170 170 85 85 85
+170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 85 85 85
+85 255 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
+170 85 0 170 170 170 85 255 85 170 85 0 170 170 170 85 85 85
+170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
+255 255 85 255 255 255 170 170 170 170 170 170 170 170 170 170 85 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
+170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 170 170
+170 85 0 170 85 0 170 170 170 85 255 85 85 85 85 170 170 170
+170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 85 85 85
+170 170 170 170 85 0 170 170 170 85 85 85 170 170 170 170 85 0
+170 170 170 85 255 85 170 85 0 170 170 170 170 170 170 170 170 170
+255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 170 170 170 255 255 85 170 170 170 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
+170 170 170 85 255 85 170 85 0 170 170 170 170 85 0 85 85 85
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 255 85 170 170 170 170 85 0 170 170 170 170 85 0 85 255 85
+170 170 170 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
+170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 85 0 85 85 85 170 170 170 255 255 85 170 170 170
+170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
+170 170 170 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
+170 85 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 85 0
+85 85 85 255 85 85 85 255 85 170 85 0 170 170 170 170 170 170
+170 85 0 170 170 170 85 85 85 255 255 85 170 170 170 170 170 170
+255 255 255 170 170 170 255 255 255 255 255 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 255 255 85 85 85 85 170 170 170
+85 255 85 255 85 85 170 170 170 85 255 85 255 85 85 85 255 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
+85 85 85 85 255 85 255 85 85 170 170 170 85 255 85 170 85 0
+170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
+170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 85 85 85 255 255 85
+170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
+85 85 85 255 255 85 170 170 170 170 85 0 170 170 170 85 85 85
+170 85 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
+170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
+255 255 85 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
+170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 85 0
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+170 85 0 85 255 85 170 170 170 170 170 170 255 255 85 170 170 170
+255 255 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 170 170 170 255 255 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
+170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
+170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 255
+170 170 170 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+170 85 0 170 170 170 170 85 0 255 255 85 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
+255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 85 85 85
+170 85 0 85 255 85 170 170 170 170 170 170 170 170 170 255 255 85
+255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
+170 170 170 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 85 0 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
+170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 255 255 255
+170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 255 85
+170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 170 85 0 170 170 170 170 170 170
+255 255 85 170 170 170 255 255 255 255 255 85 255 255 255 255 255 255
+170 170 170 255 255 85 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
+170 170 170 170 170 170 170 170 170 255 255 255 170 170 170 255 255 255
+170 170 170 255 255 255 170 170 170 255 255 255 255 255 85 255 255 255
+170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 170 170 170
+255 255 85 170 170 170 170 170 170 170 85 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+255 255 85 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 170 85 0 170 170 170
+255 255 85 170 170 170 255 255 85 255 255 255 170 170 170 255 255 255
+170 170 170 170 170 170 170 170 170 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+170 85 0 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
+255 255 255 255 255 255 170 170 170 255 255 255 255 255 85 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
+255 255 85 170 170 170 170 85 0 85 255 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
+170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
+255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 85 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
+255 255 255 170 170 170 255 255 85 170 170 170 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 170 170 170
+170 85 0 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 170 85 0 85 85 85 170 85 0
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 85 0
+85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
+170 170 170 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 255 85 170 85 0 170 170 170 170 85 0 170 170 170
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 8a75d05..fa1a512 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -34,240 +34,240 @@
#include <asm/io.h>
#include <asm/uaccess.h>
-#define MX3FB_NAME "mx3_sdc_fb"
+#define MX3FB_NAME "mx3_sdc_fb"
-#define MX3FB_REG_OFFSET 0xB4
+#define MX3FB_REG_OFFSET 0xB4
/* SDC Registers */
-#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
-#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
-#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
-#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
-#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET)
-#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET)
-#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET)
-#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET)
-#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET)
-#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET)
+#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET)
/* Register bits */
-#define SDC_COM_TFT_COLOR 0x00000001UL
-#define SDC_COM_FG_EN 0x00000010UL
-#define SDC_COM_GWSEL 0x00000020UL
-#define SDC_COM_GLB_A 0x00000040UL
-#define SDC_COM_KEY_COLOR_G 0x00000080UL
-#define SDC_COM_BG_EN 0x00000200UL
-#define SDC_COM_SHARP 0x00001000UL
+#define SDC_COM_TFT_COLOR 0x00000001UL
+#define SDC_COM_FG_EN 0x00000010UL
+#define SDC_COM_GWSEL 0x00000020UL
+#define SDC_COM_GLB_A 0x00000040UL
+#define SDC_COM_KEY_COLOR_G 0x00000080UL
+#define SDC_COM_BG_EN 0x00000200UL
+#define SDC_COM_SHARP 0x00001000UL
-#define SDC_V_SYNC_WIDTH_L 0x00000001UL
+#define SDC_V_SYNC_WIDTH_L 0x00000001UL
/* Display Interface registers */
-#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET)
-#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET)
-#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET)
-#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET)
-#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET)
-#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET)
-#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET)
-#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET)
-#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET)
-#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET)
-#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET)
-#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET)
-#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET)
-#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET)
-#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET)
-#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET)
-#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET)
-#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET)
-#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET)
+#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET)
/* DI_DISP_SIG_POL bits */
-#define DI_D3_VSYNC_POL_SHIFT 28
-#define DI_D3_HSYNC_POL_SHIFT 27
-#define DI_D3_DRDY_SHARP_POL_SHIFT 26
-#define DI_D3_CLK_POL_SHIFT 25
-#define DI_D3_DATA_POL_SHIFT 24
+#define DI_D3_VSYNC_POL_SHIFT 28
+#define DI_D3_HSYNC_POL_SHIFT 27
+#define DI_D3_DRDY_SHARP_POL_SHIFT 26
+#define DI_D3_CLK_POL_SHIFT 25
+#define DI_D3_DATA_POL_SHIFT 24
/* DI_DISP_IF_CONF bits */
-#define DI_D3_CLK_IDLE_SHIFT 26
-#define DI_D3_CLK_SEL_SHIFT 25
-#define DI_D3_DATAMSK_SHIFT 24
+#define DI_D3_CLK_IDLE_SHIFT 26
+#define DI_D3_CLK_SEL_SHIFT 25
+#define DI_D3_DATAMSK_SHIFT 24
enum ipu_panel {
- IPU_PANEL_SHARP_TFT,
- IPU_PANEL_TFT,
+ IPU_PANEL_SHARP_TFT,
+ IPU_PANEL_TFT,
};
struct ipu_di_signal_cfg {
- unsigned datamask_en:1;
- unsigned clksel_en:1;
- unsigned clkidle_en:1;
- unsigned data_pol:1; /* true = inverted */
- unsigned clk_pol:1; /* true = rising edge */
- unsigned enable_pol:1;
- unsigned Hsync_pol:1; /* true = active high */
- unsigned Vsync_pol:1;
+ unsigned datamask_en:1;
+ unsigned clksel_en:1;
+ unsigned clkidle_en:1;
+ unsigned data_pol:1; /* true = inverted */
+ unsigned clk_pol:1; /* true = rising edge */
+ unsigned enable_pol:1;
+ unsigned Hsync_pol:1; /* true = active high */
+ unsigned Vsync_pol:1;
};
static const struct fb_videomode mx3fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz */
- .name = "Sharp-QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
- FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x33 @ 60 Hz */
- .name = "Sharp-CLI",
- .refresh = 60,
- .xres = 240,
- .yres = 33,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9 + 287,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
- FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 640x480 @ 60 Hz */
- .name = "NEC-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 34,
- .lower_margin = 40,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* NTSC TV output */
- .name = "TV-NTSC",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 37538,
- .left_margin = 38,
- .right_margin = 858 - 640 - 38 - 3,
- .upper_margin = 36,
- .lower_margin = 518 - 480 - 36 - 1,
- .hsync_len = 3,
- .vsync_len = 1,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* PAL TV output */
- .name = "TV-PAL",
- .refresh = 50,
- .xres = 640,
- .yres = 480,
- .pixclock = 37538,
- .left_margin = 38,
- .right_margin = 960 - 640 - 38 - 32,
- .upper_margin = 32,
- .lower_margin = 555 - 480 - 32 - 3,
- .hsync_len = 32,
- .vsync_len = 3,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* TV output VGA mode, 640x480 @ 65 Hz */
- .name = "TV-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 40574,
- .left_margin = 35,
- .right_margin = 45,
- .upper_margin = 9,
- .lower_margin = 1,
- .hsync_len = 46,
- .vsync_len = 5,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x33 @ 60 Hz */
+ .name = "Sharp-CLI",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 33,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9 + 287,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+ FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 640x480 @ 60 Hz */
+ .name = "NEC-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 34,
+ .lower_margin = 40,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* NTSC TV output */
+ .name = "TV-NTSC",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 858 - 640 - 38 - 3,
+ .upper_margin = 36,
+ .lower_margin = 518 - 480 - 36 - 1,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* PAL TV output */
+ .name = "TV-PAL",
+ .refresh = 50,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 37538,
+ .left_margin = 38,
+ .right_margin = 960 - 640 - 38 - 32,
+ .upper_margin = 32,
+ .lower_margin = 555 - 480 - 32 - 3,
+ .hsync_len = 32,
+ .vsync_len = 3,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* TV output VGA mode, 640x480 @ 65 Hz */
+ .name = "TV-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40574,
+ .left_margin = 35,
+ .right_margin = 45,
+ .upper_margin = 9,
+ .lower_margin = 1,
+ .hsync_len = 46,
+ .vsync_len = 5,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
};
struct mx3fb_data {
- struct fb_info *fbi;
- int backlight_level;
- void __iomem *reg_base;
- spinlock_t lock;
- struct device *dev;
+ struct fb_info *fbi;
+ int backlight_level;
+ void __iomem *reg_base;
+ spinlock_t lock;
+ struct device *dev;
- uint32_t h_start_width;
- uint32_t v_start_width;
+ uint32_t h_start_width;
+ uint32_t v_start_width;
};
struct dma_chan_request {
- struct mx3fb_data *mx3fb;
- enum ipu_channel id;
+ struct mx3fb_data *mx3fb;
+ enum ipu_channel id;
};
/* MX3 specific framebuffer information. */
struct mx3fb_info {
- int blank;
- enum ipu_channel ipu_ch;
- uint32_t cur_ipu_buf;
+ int blank;
+ enum ipu_channel ipu_ch;
+ uint32_t cur_ipu_buf;
- u32 pseudo_palette[16];
+ u32 pseudo_palette[16];
- struct completion flip_cmpl;
- struct mutex mutex; /* Protects fb-ops */
- struct mx3fb_data *mx3fb;
- struct idmac_channel *idmac_channel;
- struct dma_async_tx_descriptor *txd;
- dma_cookie_t cookie;
- struct scatterlist sg[2];
+ struct completion flip_cmpl;
+ struct mutex mutex; /* Protects fb-ops */
+ struct mx3fb_data *mx3fb;
+ struct idmac_channel *idmac_channel;
+ struct dma_async_tx_descriptor *txd;
+ dma_cookie_t cookie;
+ struct scatterlist sg[2];
- u32 sync; /* preserve var->sync flags */
+ u32 sync; /* preserve var->sync flags */
};
static void mx3fb_dma_done(void *);
@@ -278,389 +278,389 @@
static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
{
- return __raw_readl(mx3fb->reg_base + reg);
+ return __raw_readl(mx3fb->reg_base + reg);
}
static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
{
- __raw_writel(value, mx3fb->reg_base + reg);
+ __raw_writel(value, mx3fb->reg_base + reg);
}
static const uint32_t di_mappings[] = {
- 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */
- 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */
- 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */
- 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */
+ 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */
+ 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */
+ 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */
+ 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */
};
static void sdc_fb_init(struct mx3fb_info *fbi)
{
- struct mx3fb_data *mx3fb = fbi->mx3fb;
- uint32_t reg;
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
}
/* Returns enabled flag before uninit */
static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
{
- struct mx3fb_data *mx3fb = fbi->mx3fb;
- uint32_t reg;
+ struct mx3fb_data *mx3fb = fbi->mx3fb;
+ uint32_t reg;
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
- return reg & SDC_COM_BG_EN;
+ return reg & SDC_COM_BG_EN;
}
static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
{
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- struct idmac_channel *ichan = mx3_fbi->idmac_channel;
- struct dma_chan *dma_chan = &ichan->dma_chan;
- unsigned long flags;
- dma_cookie_t cookie;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct dma_chan *dma_chan = &ichan->dma_chan;
+ unsigned long flags;
+ dma_cookie_t cookie;
- dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
- to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+ dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+ to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
- /* This enables the channel */
- if (mx3_fbi->cookie < 0) {
- mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
- &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
- if (!mx3_fbi->txd) {
- dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
- dma_chan->chan_id);
- return;
- }
+ /* This enables the channel */
+ if (mx3_fbi->cookie < 0) {
+ mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+ &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!mx3_fbi->txd) {
+ dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+ dma_chan->chan_id);
+ return;
+ }
- mx3_fbi->txd->callback_param = mx3_fbi->txd;
- mx3_fbi->txd->callback = mx3fb_dma_done;
+ mx3_fbi->txd->callback_param = mx3_fbi->txd;
+ mx3_fbi->txd->callback = mx3fb_dma_done;
- cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
- dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
- mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
- } else {
- if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
- dev_err(mx3fb->dev, "Cannot enable channel %d\n",
- dma_chan->chan_id);
- return;
- }
+ cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+ dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ } else {
+ if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+ dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+ dma_chan->chan_id);
+ return;
+ }
- /* Just re-activate the same buffer */
- dma_async_issue_pending(dma_chan);
- cookie = mx3_fbi->cookie;
- dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
- mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
- }
+ /* Just re-activate the same buffer */
+ dma_async_issue_pending(dma_chan);
+ cookie = mx3_fbi->cookie;
+ dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+ mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+ }
- if (cookie >= 0) {
- spin_lock_irqsave(&mx3fb->lock, flags);
- sdc_fb_init(mx3_fbi);
- mx3_fbi->cookie = cookie;
- spin_unlock_irqrestore(&mx3fb->lock, flags);
- }
+ if (cookie >= 0) {
+ spin_lock_irqsave(&mx3fb->lock, flags);
+ sdc_fb_init(mx3_fbi);
+ mx3_fbi->cookie = cookie;
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
+ }
- /*
- * Attention! Without this msleep the channel keeps generating
- * interrupts. Next sdc_set_brightness() is going to be called
- * from mx3fb_blank().
- */
- msleep(2);
+ /*
+ * Attention! Without this msleep the channel keeps generating
+ * interrupts. Next sdc_set_brightness() is going to be called
+ * from mx3fb_blank().
+ */
+ msleep(2);
}
static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
{
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- uint32_t enabled;
- unsigned long flags;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ uint32_t enabled;
+ unsigned long flags;
- spin_lock_irqsave(&mx3fb->lock, flags);
+ spin_lock_irqsave(&mx3fb->lock, flags);
- enabled = sdc_fb_uninit(mx3_fbi);
+ enabled = sdc_fb_uninit(mx3_fbi);
- spin_unlock_irqrestore(&mx3fb->lock, flags);
+ spin_unlock_irqrestore(&mx3fb->lock, flags);
- mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
- mx3_fbi->txd = NULL;
- mx3_fbi->cookie = -EINVAL;
+ mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+ mx3_fbi->txd = NULL;
+ mx3_fbi->cookie = -EINVAL;
}
/**
* sdc_set_window_pos() - set window position of the respective plane.
- * @mx3fb: mx3fb context.
- * @channel: IPU DMAC channel ID.
- * @x_pos: X coordinate relative to the top left corner to place window at.
- * @y_pos: Y coordinate relative to the top left corner to place window at.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @x_pos: X coordinate relative to the top left corner to place window at.
+ * @y_pos: Y coordinate relative to the top left corner to place window at.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
- int16_t x_pos, int16_t y_pos)
+ int16_t x_pos, int16_t y_pos)
{
- x_pos += mx3fb->h_start_width;
- y_pos += mx3fb->v_start_width;
+ x_pos += mx3fb->h_start_width;
+ y_pos += mx3fb->v_start_width;
- if (channel != IDMAC_SDC_0)
- return -EINVAL;
+ if (channel != IDMAC_SDC_0)
+ return -EINVAL;
- mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
- return 0;
+ mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+ return 0;
}
/**
* sdc_init_panel() - initialize a synchronous LCD panel.
- * @mx3fb: mx3fb context.
- * @panel: panel type.
- * @pixel_clk: desired pixel clock frequency in Hz.
- * @width: width of panel in pixels.
- * @height: height of panel in pixels.
- * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
- * @h_start_width: number of pixel clocks between the HSYNC signal pulse
- * and the start of valid data.
- * @h_sync_width: width of the HSYNC signal in units of pixel clocks.
- * @h_end_width: number of pixel clocks between the end of valid data
- * and the HSYNC signal for next line.
- * @v_start_width: number of lines between the VSYNC signal pulse and the
- * start of valid data.
- * @v_sync_width: width of the VSYNC signal in units of lines
- * @v_end_width: number of lines between the end of valid data and the
- * VSYNC signal for next frame.
- * @sig: bitfield of signal polarities for LCD interface.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @panel: panel type.
+ * @pixel_clk: desired pixel clock frequency in Hz.
+ * @width: width of panel in pixels.
+ * @height: height of panel in pixels.
+ * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width: number of pixel clocks between the HSYNC signal pulse
+ * and the start of valid data.
+ * @h_sync_width: width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width: number of pixel clocks between the end of valid data
+ * and the HSYNC signal for next line.
+ * @v_start_width: number of lines between the VSYNC signal pulse and the
+ * start of valid data.
+ * @v_sync_width: width of the VSYNC signal in units of lines
+ * @v_end_width: number of lines between the end of valid data and the
+ * VSYNC signal for next frame.
+ * @sig: bitfield of signal polarities for LCD interface.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
- uint32_t pixel_clk,
- uint16_t width, uint16_t height,
- enum pixel_fmt pixel_fmt,
- uint16_t h_start_width, uint16_t h_sync_width,
- uint16_t h_end_width, uint16_t v_start_width,
- uint16_t v_sync_width, uint16_t v_end_width,
- struct ipu_di_signal_cfg sig)
+ uint32_t pixel_clk,
+ uint16_t width, uint16_t height,
+ enum pixel_fmt pixel_fmt,
+ uint16_t h_start_width, uint16_t h_sync_width,
+ uint16_t h_end_width, uint16_t v_start_width,
+ uint16_t v_sync_width, uint16_t v_end_width,
+ struct ipu_di_signal_cfg sig)
{
- unsigned long lock_flags;
- uint32_t reg;
- uint32_t old_conf;
- uint32_t div;
- struct clk *ipu_clk;
+ unsigned long lock_flags;
+ uint32_t reg;
+ uint32_t old_conf;
+ uint32_t div;
+ struct clk *ipu_clk;
- dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+ dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
- if (v_sync_width == 0 || h_sync_width == 0)
- return -EINVAL;
+ if (v_sync_width == 0 || h_sync_width == 0)
+ return -EINVAL;
- /* Init panel size and blanking periods */
- reg = ((uint32_t) (h_sync_width - 1) << 26) |
- ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
- mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+ /* Init panel size and blanking periods */
+ reg = ((uint32_t) (h_sync_width - 1) << 26) |
+ ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
#ifdef DEBUG
- printk(KERN_CONT " hor_conf %x,", reg);
+ printk(KERN_CONT " hor_conf %x,", reg);
#endif
- reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
- ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
- mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+ reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+ ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+ mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
#ifdef DEBUG
- printk(KERN_CONT " ver_conf %x\n", reg);
+ printk(KERN_CONT " ver_conf %x\n", reg);
#endif
- mx3fb->h_start_width = h_start_width;
- mx3fb->v_start_width = v_start_width;
+ mx3fb->h_start_width = h_start_width;
+ mx3fb->v_start_width = v_start_width;
- switch (panel) {
- case IPU_PANEL_SHARP_TFT:
- mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
- mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
- mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
- break;
- case IPU_PANEL_TFT:
- mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
- break;
- default:
- return -EINVAL;
- }
+ switch (panel) {
+ case IPU_PANEL_SHARP_TFT:
+ mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+ mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+ mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ case IPU_PANEL_TFT:
+ mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ default:
+ return -EINVAL;
+ }
- /* Init clocking */
+ /* Init clocking */
- /*
- * Calculate divider: fractional part is 4 bits so simply multiple by
- * 24 to get fractional part, as long as we stay under ~250MHz and on
- * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
- */
- dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+ /*
+ * Calculate divider: fractional part is 4 bits so simply multiple by
+ * 2^4 to get fractional part, as long as we stay under ~250MHz and on
+ * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ */
+ dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
- ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
- div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
- clk_put(ipu_clk);
+ ipu_clk = clk_get(mx3fb->dev, NULL);
+ div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+ clk_put(ipu_clk);
- if (div < 0x40) { /* Divider less than 4 */
- dev_dbg(mx3fb->dev,
- "InitPanel() - Pixel clock divider less than 4\n");
- div = 0x40;
- }
+ if (div < 0x40) { /* Divider less than 4 */
+ dev_dbg(mx3fb->dev,
+ "InitPanel() - Pixel clock divider less than 4\n");
+ div = 0x40;
+ }
- spin_lock_irqsave(&mx3fb->lock, lock_flags);
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
- /*
- * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
- * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
- * debug. DISP3_IF_CLK_UP_WR is 0
- */
- mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+ /*
+ * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+ * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+ * debug. DISP3_IF_CLK_UP_WR is 0
+ */
+ mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
- /* DI settings */
- old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
- old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
- sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
- sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
- mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+ /* DI settings */
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+ old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+ sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+ sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
- old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
- old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
- sig.clk_pol << DI_D3_CLK_POL_SHIFT |
- sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
- sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
- sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
- mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+ sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+ sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+ sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+ sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+ mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
- switch (pixel_fmt) {
- case IPU_PIX_FMT_RGB24:
- mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
- break;
- case IPU_PIX_FMT_RGB666:
- mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
- break;
- case IPU_PIX_FMT_BGR666:
- mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
- break;
- default:
- mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
- mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
- mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
- ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
- break;
- }
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_RGB24:
+ mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_RGB666:
+ mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ case IPU_PIX_FMT_BGR666:
+ mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ default:
+ mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+ mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+ mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+ ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+ break;
+ }
- spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
- dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
- mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
- dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
- mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
- dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
- mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+ dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+ dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+ dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+ mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
- return 0;
+ return 0;
}
/**
* sdc_set_color_key() - set the transparent color key for SDC graphic plane.
- * @mx3fb: mx3fb context.
- * @channel: IPU DMAC channel ID.
- * @enable: boolean to enable or disable color keyl.
- * @color_key: 24-bit RGB color to use as transparent color key.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @channel: IPU DMAC channel ID.
+ * @enable: boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
- bool enable, uint32_t color_key)
+ bool enable, uint32_t color_key)
{
- uint32_t reg, sdc_conf;
- unsigned long lock_flags;
+ uint32_t reg, sdc_conf;
+ unsigned long lock_flags;
- spin_lock_irqsave(&mx3fb->lock, lock_flags);
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
- sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- if (channel == IDMAC_SDC_0)
- sdc_conf &= ~SDC_COM_GWSEL;
- else
- sdc_conf |= SDC_COM_GWSEL;
+ sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ if (channel == IDMAC_SDC_0)
+ sdc_conf &= ~SDC_COM_GWSEL;
+ else
+ sdc_conf |= SDC_COM_GWSEL;
- if (enable) {
- reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
- mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
- SDC_GW_CTRL);
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+ mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+ SDC_GW_CTRL);
- sdc_conf |= SDC_COM_KEY_COLOR_G;
- } else {
- sdc_conf &= ~SDC_COM_KEY_COLOR_G;
- }
- mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+ sdc_conf |= SDC_COM_KEY_COLOR_G;
+ } else {
+ sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+ }
+ mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
- spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
- return 0;
+ return 0;
}
/**
* sdc_set_global_alpha() - set global alpha blending modes.
- * @mx3fb: mx3fb context.
- * @enable: boolean to enable or disable global alpha blending. If disabled,
- * per pixel blending is used.
- * @alpha: global alpha value.
- * @return: 0 on success or negative error code on failure.
+ * @mx3fb: mx3fb context.
+ * @enable: boolean to enable or disable global alpha blending. If disabled,
+ * per pixel blending is used.
+ * @alpha: global alpha value.
+ * @return: 0 on success or negative error code on failure.
*/
static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
{
- uint32_t reg;
- unsigned long lock_flags;
+ uint32_t reg;
+ unsigned long lock_flags;
- spin_lock_irqsave(&mx3fb->lock, lock_flags);
+ spin_lock_irqsave(&mx3fb->lock, lock_flags);
- if (enable) {
- reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
- mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+ if (enable) {
+ reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+ mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
- } else {
- reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
- mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
- }
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+ } else {
+ reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+ mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+ }
- spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+ spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
- return 0;
+ return 0;
}
static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
{
- /* This might be board-specific */
- mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
- return;
+ /* This might be board-specific */
+ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+ return;
}
static uint32_t bpp_to_pixfmt(int bpp)
{
- uint32_t pixfmt = 0;
- switch (bpp) {
- case 24:
- pixfmt = IPU_PIX_FMT_BGR24;
- break;
- case 32:
- pixfmt = IPU_PIX_FMT_BGR32;
- break;
- case 16:
- pixfmt = IPU_PIX_FMT_RGB565;
- break;
- }
- return pixfmt;
+ uint32_t pixfmt = 0;
+ switch (bpp) {
+ case 24:
+ pixfmt = IPU_PIX_FMT_BGR24;
+ break;
+ case 32:
+ pixfmt = IPU_PIX_FMT_BGR32;
+ break;
+ case 16:
+ pixfmt = IPU_PIX_FMT_RGB565;
+ break;
+ }
+ return pixfmt;
}
static int mx3fb_blank(int blank, struct fb_info *fbi);
@@ -669,300 +669,300 @@
/**
* mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
- * @info: framebuffer information pointer
- * @return: 0 on success or negative error code on failure.
+ * @info: framebuffer information pointer
+ * @return: 0 on success or negative error code on failure.
*/
static int mx3fb_set_fix(struct fb_info *fbi)
{
- struct fb_fix_screeninfo *fix = &fbi->fix;
- struct fb_var_screeninfo *var = &fbi->var;
+ struct fb_fix_screeninfo *fix = &fbi->fix;
+ struct fb_var_screeninfo *var = &fbi->var;
- strncpy(fix->id, "DISP3 BG", 8);
+ strncpy(fix->id, "DISP3 BG", 8);
- fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->accel = FB_ACCEL_NONE;
- fix->visual = FB_VISUAL_TRUECOLOR;
- fix->xpanstep = 1;
- fix->ypanstep = 1;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
- return 0;
+ return 0;
}
static void mx3fb_dma_done(void *arg)
{
- struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
- struct dma_chan *chan = tx_desc->txd.chan;
- struct idmac_channel *ichannel = to_idmac_chan(chan);
- struct mx3fb_data *mx3fb = ichannel->client;
- struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+ struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+ struct dma_chan *chan = tx_desc->txd.chan;
+ struct idmac_channel *ichannel = to_idmac_chan(chan);
+ struct mx3fb_data *mx3fb = ichannel->client;
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
- dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+ dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
- /* We only need one interrupt, it will be re-enabled as needed */
- disable_irq(ichannel->eof_irq);
+ /* We only need one interrupt, it will be re-enabled as needed */
+ disable_irq(ichannel->eof_irq);
- complete(&mx3_fbi->flip_cmpl);
+ complete(&mx3_fbi->flip_cmpl);
}
/**
* mx3fb_set_par() - set framebuffer parameters and change the operating mode.
- * @fbi: framebuffer information pointer.
- * @return: 0 on success or negative error code on failure.
+ * @fbi: framebuffer information pointer.
+ * @return: 0 on success or negative error code on failure.
*/
static int mx3fb_set_par(struct fb_info *fbi)
{
- u32 mem_len;
- struct ipu_di_signal_cfg sig_cfg;
- enum ipu_panel mode = IPU_PANEL_TFT;
- struct mx3fb_info *mx3_fbi = fbi->par;
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- struct idmac_channel *ichan = mx3_fbi->idmac_channel;
- struct idmac_video_param *video = &ichan->params.video;
- struct scatterlist *sg = mx3_fbi->sg;
- size_t screen_size;
+ u32 mem_len;
+ struct ipu_di_signal_cfg sig_cfg;
+ enum ipu_panel mode = IPU_PANEL_TFT;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+ struct idmac_video_param *video = &ichan->params.video;
+ struct scatterlist *sg = mx3_fbi->sg;
+ size_t screen_size;
- dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+ dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
- mutex_lock(&mx3_fbi->mutex);
+ mutex_lock(&mx3_fbi->mutex);
- /* Total cleanup */
- if (mx3_fbi->txd)
- sdc_disable_channel(mx3_fbi);
+ /* Total cleanup */
+ if (mx3_fbi->txd)
+ sdc_disable_channel(mx3_fbi);
- mx3fb_set_fix(fbi);
+ mx3fb_set_fix(fbi);
- mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
- if (mem_len > fbi->fix.smem_len) {
- if (fbi->fix.smem_start)
- mx3fb_unmap_video_memory(fbi);
+ mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+ if (mem_len > fbi->fix.smem_len) {
+ if (fbi->fix.smem_start)
+ mx3fb_unmap_video_memory(fbi);
- fbi->fix.smem_len = mem_len;
- if (mx3fb_map_video_memory(fbi) < 0) {
- mutex_unlock(&mx3_fbi->mutex);
- return -ENOMEM;
- }
- }
+ fbi->fix.smem_len = mem_len;
+ if (mx3fb_map_video_memory(fbi) < 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ return -ENOMEM;
+ }
+ }
- screen_size = fbi->fix.line_length * fbi->var.yres;
+ screen_size = fbi->fix.line_length * fbi->var.yres;
- sg_init_table(&sg[0], 1);
- sg_init_table(&sg[1], 1);
+ sg_init_table(&sg[0], 1);
+ sg_init_table(&sg[1], 1);
- sg_dma_address(&sg[0]) = fbi->fix.smem_start;
- sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
- fbi->fix.smem_len,
- offset_in_page(fbi->screen_base));
+ sg_dma_address(&sg[0]) = fbi->fix.smem_start;
+ sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+ fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base));
- if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
- memset(&sig_cfg, 0, sizeof(sig_cfg));
- if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
- sig_cfg.Hsync_pol = true;
- if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
- sig_cfg.Vsync_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_INVERT)
- sig_cfg.clk_pol = true;
- if (fbi->var.sync & FB_SYNC_DATA_INVERT)
- sig_cfg.data_pol = true;
- if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
- sig_cfg.enable_pol = true;
- if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
- sig_cfg.clkidle_en = true;
- if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
- sig_cfg.clksel_en = true;
- if (fbi->var.sync & FB_SYNC_SHARP_MODE)
- mode = IPU_PANEL_SHARP_TFT;
+ if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+ memset(&sig_cfg, 0, sizeof(sig_cfg));
+ if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ sig_cfg.Hsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ sig_cfg.Vsync_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+ sig_cfg.clk_pol = true;
+ if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+ sig_cfg.data_pol = true;
+ if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+ sig_cfg.enable_pol = true;
+ if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+ sig_cfg.clkidle_en = true;
+ if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+ sig_cfg.clksel_en = true;
+ if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+ mode = IPU_PANEL_SHARP_TFT;
- dev_dbg(fbi->device, "pixclock = %ul Hz\n",
- (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+ dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+ (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
- if (sdc_init_panel(mx3fb, mode,
- (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
- fbi->var.xres, fbi->var.yres,
- (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
- IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
- fbi->var.left_margin,
- fbi->var.hsync_len,
- fbi->var.right_margin +
- fbi->var.hsync_len,
- fbi->var.upper_margin,
- fbi->var.vsync_len,
- fbi->var.lower_margin +
- fbi->var.vsync_len, sig_cfg) != 0) {
- mutex_unlock(&mx3_fbi->mutex);
- dev_err(fbi->device,
- "mx3fb: Error initializing panel.\n");
- return -EINVAL;
- }
- }
+ if (sdc_init_panel(mx3fb, mode,
+ (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+ fbi->var.xres, fbi->var.yres,
+ (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+ IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+ fbi->var.left_margin,
+ fbi->var.hsync_len,
+ fbi->var.right_margin +
+ fbi->var.hsync_len,
+ fbi->var.upper_margin,
+ fbi->var.vsync_len,
+ fbi->var.lower_margin +
+ fbi->var.vsync_len, sig_cfg) != 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_err(fbi->device,
+ "mx3fb: Error initializing panel.\n");
+ return -EINVAL;
+ }
+ }
- sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+ sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
- mx3_fbi->cur_ipu_buf = 0;
+ mx3_fbi->cur_ipu_buf = 0;
- video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel);
- video->out_width = fbi->var.xres;
- video->out_height = fbi->var.yres;
- video->out_stride = fbi->var.xres_virtual;
+ video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+ video->out_width = fbi->var.xres;
+ video->out_height = fbi->var.yres;
+ video->out_stride = fbi->var.xres_virtual;
- if (mx3_fbi->blank == FB_BLANK_UNBLANK)
- sdc_enable_channel(mx3_fbi);
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+ sdc_enable_channel(mx3_fbi);
- mutex_unlock(&mx3_fbi->mutex);
+ mutex_unlock(&mx3_fbi->mutex);
- return 0;
+ return 0;
}
/**
* mx3fb_check_var() - check and adjust framebuffer variable parameters.
- * @var: framebuffer variable parameters
- * @fbi: framebuffer information pointer
+ * @var: framebuffer variable parameters
+ * @fbi: framebuffer information pointer
*/
static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- u32 vtotal;
- u32 htotal;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 vtotal;
+ u32 htotal;
- dev_dbg(fbi->device, "%s\n", __func__);
+ dev_dbg(fbi->device, "%s\n", __func__);
- if (var->xres_virtual < var->xres)
- var->xres_virtual = var->xres;
- if (var->yres_virtual < var->yres)
- var->yres_virtual = var->yres;
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
- if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
- (var->bits_per_pixel != 16))
- var->bits_per_pixel = default_bpp;
+ if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+ (var->bits_per_pixel != 16))
+ var->bits_per_pixel = default_bpp;
- switch (var->bits_per_pixel) {
- case 16:
- var->red.length = 5;
- var->red.offset = 11;
- var->red.msb_right = 0;
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
- var->green.length = 6;
- var->green.offset = 5;
- var->green.msb_right = 0;
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
- var->blue.length = 5;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
- var->transp.length = 0;
- var->transp.offset = 0;
- var->transp.msb_right = 0;
- break;
- case 24:
- var->red.length = 8;
- var->red.offset = 16;
- var->red.msb_right = 0;
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
- var->green.length = 8;
- var->green.offset = 8;
- var->green.msb_right = 0;
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
- var->blue.length = 8;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
- var->transp.length = 0;
- var->transp.offset = 0;
- var->transp.msb_right = 0;
- break;
- case 32:
- var->red.length = 8;
- var->red.offset = 16;
- var->red.msb_right = 0;
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
- var->green.length = 8;
- var->green.offset = 8;
- var->green.msb_right = 0;
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
- var->blue.length = 8;
- var->blue.offset = 0;
- var->blue.msb_right = 0;
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
- var->transp.length = 8;
- var->transp.offset = 24;
- var->transp.msb_right = 0;
- break;
- }
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+ break;
+ }
- if (var->pixclock < 1000) {
- htotal = var->xres + var->right_margin + var->hsync_len +
- var->left_margin;
- vtotal = var->yres + var->lower_margin + var->vsync_len +
- var->upper_margin;
- var->pixclock = (vtotal * htotal * 6UL) / 100UL;
- var->pixclock = KHZ2PICOS(var->pixclock);
- dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
- var->pixclock);
- }
+ if (var->pixclock < 1000) {
+ htotal = var->xres + var->right_margin + var->hsync_len +
+ var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
+ var->upper_margin;
+ var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+ var->pixclock = KHZ2PICOS(var->pixclock);
+ dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+ var->pixclock);
+ }
- var->height = -1;
- var->width = -1;
- var->grayscale = 0;
+ var->height = -1;
+ var->width = -1;
+ var->grayscale = 0;
- /* Preserve sync flags */
- var->sync |= mx3_fbi->sync;
- mx3_fbi->sync |= var->sync;
+ /* Preserve sync flags */
+ var->sync |= mx3_fbi->sync;
+ mx3_fbi->sync |= var->sync;
- return 0;
+ return 0;
}
static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
{
- chan &= 0xffff;
- chan >>= 16 - bf->length;
- return chan << bf->offset;
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
}
static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
- unsigned int green, unsigned int blue,
- unsigned int trans, struct fb_info *fbi)
+ unsigned int green, unsigned int blue,
+ unsigned int trans, struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- u32 val;
- int ret = 1;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 val;
+ int ret = 1;
- dev_dbg(fbi->device, "%s\n", __func__);
+ dev_dbg(fbi->device, "%s\n", __func__);
- mutex_lock(&mx3_fbi->mutex);
- /*
- * If greyscale is true, then we convert the RGB value
- * to greyscale no matter what visual we are using.
- */
- if (fbi->var.grayscale)
- red = green = blue = (19595 * red + 38470 * green +
- 7471 * blue) >> 16;
- switch (fbi->fix.visual) {
- case FB_VISUAL_TRUECOLOR:
- /*
- * 16-bit True Colour. We encode the RGB value
- * according to the RGB bitfield information.
- */
- if (regno < 16) {
- u32 *pal = fbi->pseudo_palette;
+ mutex_lock(&mx3_fbi->mutex);
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (fbi->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (fbi->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = fbi->pseudo_palette;
- val = chan_to_field(red, &fbi->var.red);
- val |= chan_to_field(green, &fbi->var.green);
- val |= chan_to_field(blue, &fbi->var.blue);
+ val = chan_to_field(red, &fbi->var.red);
+ val |= chan_to_field(green, &fbi->var.green);
+ val |= chan_to_field(blue, &fbi->var.blue);
- pal[regno] = val;
+ pal[regno] = val;
- ret = 0;
- }
- break;
+ ret = 0;
+ }
+ break;
- case FB_VISUAL_STATIC_PSEUDOCOLOR:
- case FB_VISUAL_PSEUDOCOLOR:
- break;
- }
- mutex_unlock(&mx3_fbi->mutex);
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
- return ret;
+ return ret;
}
/**
@@ -970,152 +970,152 @@
*/
static int mx3fb_blank(int blank, struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
- dev_dbg(fbi->device, "%s\n", __func__);
+ dev_dbg(fbi->device, "%s\n", __func__);
- dev_dbg(fbi->device, "blank = %d\n", blank);
+ dev_dbg(fbi->device, "blank = %d\n", blank);
- if (mx3_fbi->blank == blank)
- return 0;
+ if (mx3_fbi->blank == blank)
+ return 0;
- mutex_lock(&mx3_fbi->mutex);
- mx3_fbi->blank = blank;
+ mutex_lock(&mx3_fbi->mutex);
+ mx3_fbi->blank = blank;
- switch (blank) {
- case FB_BLANK_POWERDOWN:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_NORMAL:
- sdc_disable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, 0);
- break;
- case FB_BLANK_UNBLANK:
- sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, mx3fb->backlight_level);
- break;
- }
- mutex_unlock(&mx3_fbi->mutex);
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
+ break;
+ case FB_BLANK_UNBLANK:
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+ break;
+ }
+ mutex_unlock(&mx3_fbi->mutex);
- return 0;
+ return 0;
}
/**
* mx3fb_pan_display() - pan or wrap the display
- * @var: variable screen buffer information.
- * @info: framebuffer information pointer.
+ * @var: variable screen buffer information.
+ * @info: framebuffer information pointer.
*
* We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
*/
static int mx3fb_pan_display(struct fb_var_screeninfo *var,
- struct fb_info *fbi)
+ struct fb_info *fbi)
{
- struct mx3fb_info *mx3_fbi = fbi->par;
- u32 y_bottom;
- unsigned long base;
- off_t offset;
- dma_cookie_t cookie;
- struct scatterlist *sg = mx3_fbi->sg;
- struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
- struct dma_async_tx_descriptor *txd;
- int ret;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ u32 y_bottom;
+ unsigned long base;
+ off_t offset;
+ dma_cookie_t cookie;
+ struct scatterlist *sg = mx3_fbi->sg;
+ struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+ struct dma_async_tx_descriptor *txd;
+ int ret;
- dev_dbg(fbi->device, "%s [%c]\n", __func__,
- list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+ dev_dbg(fbi->device, "%s [%c]\n", __func__,
+ list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
- if (var->xoffset > 0) {
- dev_dbg(fbi->device, "x panning not supported\n");
- return -EINVAL;
- }
+ if (var->xoffset > 0) {
+ dev_dbg(fbi->device, "x panning not supported\n");
+ return -EINVAL;
+ }
- if (fbi->var.xoffset == var->xoffset &&
- fbi->var.yoffset == var->yoffset)
- return 0; /* No change, do nothing */
+ if (fbi->var.xoffset == var->xoffset &&
+ fbi->var.yoffset == var->yoffset)
+ return 0; /* No change, do nothing */
- y_bottom = var->yoffset;
+ y_bottom = var->yoffset;
- if (!(var->vmode & FB_VMODE_YWRAP))
- y_bottom += var->yres;
+ if (!(var->vmode & FB_VMODE_YWRAP))
+ y_bottom += var->yres;
- if (y_bottom > fbi->var.yres_virtual)
- return -EINVAL;
+ if (y_bottom > fbi->var.yres_virtual)
+ return -EINVAL;
- mutex_lock(&mx3_fbi->mutex);
+ mutex_lock(&mx3_fbi->mutex);
- offset = (var->yoffset * var->xres_virtual + var->xoffset) *
- (var->bits_per_pixel / 8);
- base = fbi->fix.smem_start + offset;
+ offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+ (var->bits_per_pixel / 8);
+ base = fbi->fix.smem_start + offset;
- dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
- mx3_fbi->cur_ipu_buf, base);
+ dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
- /*
- * We enable the End of Frame interrupt, which will free a tx-descriptor,
- * which we will need for the next device_prep_slave_sg(). The
- * IRQ-handler will disable the IRQ again.
- */
- init_completion(&mx3_fbi->flip_cmpl);
- enable_irq(mx3_fbi->idmac_channel->eof_irq);
+ /*
+ * We enable the End of Frame interrupt, which will free a tx-descriptor,
+ * which we will need for the next device_prep_slave_sg(). The
+ * IRQ-handler will disable the IRQ again.
+ */
+ init_completion(&mx3_fbi->flip_cmpl);
+ enable_irq(mx3_fbi->idmac_channel->eof_irq);
- ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
- if (ret <= 0) {
- mutex_unlock(&mx3_fbi->mutex);
- dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
- "user interrupt" : "timeout");
- return ret ? : -ETIMEDOUT;
- }
+ ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+ if (ret <= 0) {
+ mutex_unlock(&mx3_fbi->mutex);
+ dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+ "user interrupt" : "timeout");
+ return ret ? : -ETIMEDOUT;
+ }
- mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+ mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
- sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
- sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
- virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
- offset_in_page(fbi->screen_base + offset));
+ sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+ sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+ virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+ offset_in_page(fbi->screen_base + offset));
- txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
- mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
- if (!txd) {
- dev_err(fbi->device,
- "Error preparing a DMA transaction descriptor.\n");
- mutex_unlock(&mx3_fbi->mutex);
- return -EIO;
- }
+ txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+ mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+ if (!txd) {
+ dev_err(fbi->device,
+ "Error preparing a DMA transaction descriptor.\n");
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
- txd->callback_param = txd;
- txd->callback = mx3fb_dma_done;
+ txd->callback_param = txd;
+ txd->callback = mx3fb_dma_done;
- /*
- * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
- * should switch to another buffer
- */
- cookie = txd->tx_submit(txd);
- dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
- if (cookie < 0) {
- dev_err(fbi->device,
- "Error updating SDC buf %d to address=0x%08lX\n",
- mx3_fbi->cur_ipu_buf, base);
- mutex_unlock(&mx3_fbi->mutex);
- return -EIO;
- }
+ /*
+ * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+ * should switch to another buffer
+ */
+ cookie = txd->tx_submit(txd);
+ dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+ if (cookie < 0) {
+ dev_err(fbi->device,
+ "Error updating SDC buf %d to address=0x%08lX\n",
+ mx3_fbi->cur_ipu_buf, base);
+ mutex_unlock(&mx3_fbi->mutex);
+ return -EIO;
+ }
- if (mx3_fbi->txd)
- async_tx_ack(mx3_fbi->txd);
- mx3_fbi->txd = txd;
+ if (mx3_fbi->txd)
+ async_tx_ack(mx3_fbi->txd);
+ mx3_fbi->txd = txd;
- fbi->var.xoffset = var->xoffset;
- fbi->var.yoffset = var->yoffset;
+ fbi->var.xoffset = var->xoffset;
+ fbi->var.yoffset = var->yoffset;
- if (var->vmode & FB_VMODE_YWRAP)
- fbi->var.vmode |= FB_VMODE_YWRAP;
- else
- fbi->var.vmode &= ~FB_VMODE_YWRAP;
+ if (var->vmode & FB_VMODE_YWRAP)
+ fbi->var.vmode |= FB_VMODE_YWRAP;
+ else
+ fbi->var.vmode &= ~FB_VMODE_YWRAP;
- mutex_unlock(&mx3_fbi->mutex);
+ mutex_unlock(&mx3_fbi->mutex);
- dev_dbg(fbi->device, "Update complete\n");
+ dev_dbg(fbi->device, "Update complete\n");
- return 0;
+ return 0;
}
/*
@@ -1124,15 +1124,15 @@
* blitting, rectangle filling, copy regions and cursor definition.
*/
static struct fb_ops mx3fb_ops = {
- .owner = THIS_MODULE,
- .fb_set_par = mx3fb_set_par,
- .fb_check_var = mx3fb_check_var,
- .fb_setcolreg = mx3fb_setcolreg,
- .fb_pan_display = mx3fb_pan_display,
- .fb_fillrect = cfb_fillrect,
- .fb_copyarea = cfb_copyarea,
- .fb_imageblit = cfb_imageblit,
- .fb_blank = mx3fb_blank,
+ .owner = THIS_MODULE,
+ .fb_set_par = mx3fb_set_par,
+ .fb_check_var = mx3fb_check_var,
+ .fb_setcolreg = mx3fb_setcolreg,
+ .fb_pan_display = mx3fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = mx3fb_blank,
};
#ifdef CONFIG_PM
@@ -1146,19 +1146,19 @@
*/
static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
- acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 1);
- release_console_sem();
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 1);
+ release_console_sem();
- if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
- sdc_disable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, 0);
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_disable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, 0);
- }
- return 0;
+ }
+ return 0;
}
/*
@@ -1166,19 +1166,19 @@
*/
static int mx3fb_resume(struct platform_device *pdev)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
- if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
- sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, drv_data->backlight_level);
- }
+ if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+ sdc_enable_channel(mx3_fbi);
+ sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ }
- acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 0);
- release_console_sem();
+ acquire_console_sem();
+ fb_set_suspend(drv_data->fbi, 0);
+ release_console_sem();
- return 0;
+ return 0;
}
#else
#define mx3fb_suspend NULL
@@ -1191,8 +1191,8 @@
/**
* mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
- * @fbi: framebuffer information pointer
- * @return: Error code indicating success or failure
+ * @fbi: framebuffer information pointer
+ * @return: Error code indicating success or failure
*
* This buffer is remapped into a non-cached, non-buffered, memory region to
* allow palette and pixel writes to occur without flushing the cache. Once this
@@ -1201,349 +1201,349 @@
*/
static int mx3fb_map_video_memory(struct fb_info *fbi)
{
- int retval = 0;
- dma_addr_t addr;
+ int retval = 0;
+ dma_addr_t addr;
- fbi->screen_base = dma_alloc_writecombine(fbi->device,
- fbi->fix.smem_len,
- &addr, GFP_DMA);
+ fbi->screen_base = dma_alloc_writecombine(fbi->device,
+ fbi->fix.smem_len,
+ &addr, GFP_DMA);
- if (!fbi->screen_base) {
- dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
- fbi->fix.smem_len);
- retval = -EBUSY;
- goto err0;
- }
+ if (!fbi->screen_base) {
+ dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+ fbi->fix.smem_len);
+ retval = -EBUSY;
+ goto err0;
+ }
- fbi->fix.smem_start = addr;
+ fbi->fix.smem_start = addr;
- dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
- (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+ dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+ (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
- fbi->screen_size = fbi->fix.smem_len;
+ fbi->screen_size = fbi->fix.smem_len;
- /* Clear the screen */
- memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+ /* Clear the screen */
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
- return 0;
+ return 0;
err0:
- fbi->fix.smem_len = 0;
- fbi->fix.smem_start = 0;
- fbi->screen_base = NULL;
- return retval;
+ fbi->fix.smem_len = 0;
+ fbi->fix.smem_start = 0;
+ fbi->screen_base = NULL;
+ return retval;
}
/**
* mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
- * @fbi: framebuffer information pointer
- * @return: error code indicating success or failure
+ * @fbi: framebuffer information pointer
+ * @return: error code indicating success or failure
*/
static int mx3fb_unmap_video_memory(struct fb_info *fbi)
{
- dma_free_writecombine(fbi->device, fbi->fix.smem_len,
- fbi->screen_base, fbi->fix.smem_start);
+ dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+ fbi->screen_base, fbi->fix.smem_start);
- fbi->screen_base = 0;
- fbi->fix.smem_start = 0;
- fbi->fix.smem_len = 0;
- return 0;
+ fbi->screen_base = 0;
+ fbi->fix.smem_start = 0;
+ fbi->fix.smem_len = 0;
+ return 0;
}
/**
* mx3fb_init_fbinfo() - initialize framebuffer information object.
- * @return: initialized framebuffer structure.
+ * @return: initialized framebuffer structure.
*/
static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
{
- struct fb_info *fbi;
- struct mx3fb_info *mx3fbi;
- int ret;
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ int ret;
- /* Allocate sufficient memory for the fb structure */
- fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
- if (!fbi)
- return NULL;
+ /* Allocate sufficient memory for the fb structure */
+ fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+ if (!fbi)
+ return NULL;
- mx3fbi = fbi->par;
- mx3fbi->cookie = -EINVAL;
- mx3fbi->cur_ipu_buf = 0;
+ mx3fbi = fbi->par;
+ mx3fbi->cookie = -EINVAL;
+ mx3fbi->cur_ipu_buf = 0;
- fbi->var.activate = FB_ACTIVATE_NOW;
+ fbi->var.activate = FB_ACTIVATE_NOW;
- fbi->fbops = ops;
- fbi->flags = FBINFO_FLAG_DEFAULT;
- fbi->pseudo_palette = mx3fbi->pseudo_palette;
+ fbi->fbops = ops;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = mx3fbi->pseudo_palette;
- mutex_init(&mx3fbi->mutex);
+ mutex_init(&mx3fbi->mutex);
- /* Allocate colormap */
- ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
- if (ret < 0) {
- framebuffer_release(fbi);
- return NULL;
- }
+ /* Allocate colormap */
+ ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+ if (ret < 0) {
+ framebuffer_release(fbi);
+ return NULL;
+ }
- return fbi;
+ return fbi;
}
static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
{
- struct device *dev = mx3fb->dev;
- struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
- const char *name = mx3fb_pdata->name;
- unsigned int irq;
- struct fb_info *fbi;
- struct mx3fb_info *mx3fbi;
- const struct fb_videomode *mode;
- int ret, num_modes;
+ struct device *dev = mx3fb->dev;
+ struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+ const char *name = mx3fb_pdata->name;
+ unsigned int irq;
+ struct fb_info *fbi;
+ struct mx3fb_info *mx3fbi;
+ const struct fb_videomode *mode;
+ int ret, num_modes;
- ichan->client = mx3fb;
- irq = ichan->eof_irq;
+ ichan->client = mx3fb;
+ irq = ichan->eof_irq;
- if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
- return -EINVAL;
+ if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+ return -EINVAL;
- fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
- if (!fbi)
- return -ENOMEM;
+ fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+ if (!fbi)
+ return -ENOMEM;
- if (!fb_mode)
- fb_mode = name;
+ if (!fb_mode)
+ fb_mode = name;
- if (!fb_mode) {
- ret = -EINVAL;
- goto emode;
- }
+ if (!fb_mode) {
+ ret = -EINVAL;
+ goto emode;
+ }
- if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
- mode = mx3fb_pdata->mode;
- num_modes = mx3fb_pdata->num_modes;
- } else {
- mode = mx3fb_modedb;
- num_modes = ARRAY_SIZE(mx3fb_modedb);
- }
+ if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+ mode = mx3fb_pdata->mode;
+ num_modes = mx3fb_pdata->num_modes;
+ } else {
+ mode = mx3fb_modedb;
+ num_modes = ARRAY_SIZE(mx3fb_modedb);
+ }
- if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
- num_modes, NULL, default_bpp)) {
- ret = -EBUSY;
- goto emode;
- }
+ if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+ num_modes, NULL, default_bpp)) {
+ ret = -EBUSY;
+ goto emode;
+ }
- fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+ fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
- /* Default Y virtual size is 2x panel size */
- fbi->var.yres_virtual = fbi->var.yres * 2;
+ /* Default Y virtual size is 2x panel size */
+ fbi->var.yres_virtual = fbi->var.yres * 2;
- mx3fb->fbi = fbi;
+ mx3fb->fbi = fbi;
- /* set Display Interface clock period */
- mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
- /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+ /* set Display Interface clock period */
+ mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+ /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
- sdc_set_brightness(mx3fb, 255);
- sdc_set_global_alpha(mx3fb, true, 0xFF);
- sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+ sdc_set_brightness(mx3fb, 255);
+ sdc_set_global_alpha(mx3fb, true, 0xFF);
+ sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
- mx3fbi = fbi->par;
- mx3fbi->idmac_channel = ichan;
- mx3fbi->ipu_ch = ichan->dma_chan.chan_id;
- mx3fbi->mx3fb = mx3fb;
- mx3fbi->blank = FB_BLANK_NORMAL;
+ mx3fbi = fbi->par;
+ mx3fbi->idmac_channel = ichan;
+ mx3fbi->ipu_ch = ichan->dma_chan.chan_id;
+ mx3fbi->mx3fb = mx3fb;
+ mx3fbi->blank = FB_BLANK_NORMAL;
- init_completion(&mx3fbi->flip_cmpl);
- disable_irq(ichan->eof_irq);
- dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
- ret = mx3fb_set_par(fbi);
- if (ret < 0)
- goto esetpar;
+ init_completion(&mx3fbi->flip_cmpl);
+ disable_irq(ichan->eof_irq);
+ dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+ ret = mx3fb_set_par(fbi);
+ if (ret < 0)
+ goto esetpar;
- mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+ mx3fb_blank(FB_BLANK_UNBLANK, fbi);
- dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+ dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
- ret = register_framebuffer(fbi);
- if (ret < 0)
- goto erfb;
+ ret = register_framebuffer(fbi);
+ if (ret < 0)
+ goto erfb;
- return 0;
+ return 0;
erfb:
esetpar:
emode:
- fb_dealloc_cmap(&fbi->cmap);
- framebuffer_release(fbi);
+ fb_dealloc_cmap(&fbi->cmap);
+ framebuffer_release(fbi);
- return ret;
+ return ret;
}
static bool chan_filter(struct dma_chan *chan, void *arg)
{
- struct dma_chan_request *rq = arg;
- struct device *dev;
- struct mx3fb_platform_data *mx3fb_pdata;
+ struct dma_chan_request *rq = arg;
+ struct device *dev;
+ struct mx3fb_platform_data *mx3fb_pdata;
- if (!rq)
- return false;
+ if (!rq)
+ return false;
- dev = rq->mx3fb->dev;
- mx3fb_pdata = dev->platform_data;
+ dev = rq->mx3fb->dev;
+ mx3fb_pdata = dev->platform_data;
- return rq->id == chan->chan_id &&
- mx3fb_pdata->dma_dev == chan->device->dev;
+ return rq->id == chan->chan_id &&
+ mx3fb_pdata->dma_dev == chan->device->dev;
}
static void release_fbi(struct fb_info *fbi)
{
- mx3fb_unmap_video_memory(fbi);
+ mx3fb_unmap_video_memory(fbi);
- fb_dealloc_cmap(&fbi->cmap);
+ fb_dealloc_cmap(&fbi->cmap);
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
}
static int mx3fb_probe(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- int ret;
- struct resource *sdc_reg;
- struct mx3fb_data *mx3fb;
- dma_cap_mask_t mask;
- struct dma_chan *chan;
- struct dma_chan_request rq;
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct resource *sdc_reg;
+ struct mx3fb_data *mx3fb;
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_chan_request rq;
- /*
- * Display Interface (DI) and Synchronous Display Controller (SDC)
- * registers
- */
- sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!sdc_reg)
- return -EINVAL;
+ /*
+ * Display Interface (DI) and Synchronous Display Controller (SDC)
+ * registers
+ */
+ sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!sdc_reg)
+ return -EINVAL;
- mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
- if (!mx3fb)
- return -ENOMEM;
+ mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+ if (!mx3fb)
+ return -ENOMEM;
- spin_lock_init(&mx3fb->lock);
+ spin_lock_init(&mx3fb->lock);
- mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
- if (!mx3fb->reg_base) {
- ret = -ENOMEM;
- goto eremap;
- }
+ mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+ if (!mx3fb->reg_base) {
+ ret = -ENOMEM;
+ goto eremap;
+ }
- pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
- mx3fb->reg_base);
+ pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+ mx3fb->reg_base);
- /* IDMAC interface */
- dmaengine_get();
+ /* IDMAC interface */
+ dmaengine_get();
- mx3fb->dev = dev;
- platform_set_drvdata(pdev, mx3fb);
+ mx3fb->dev = dev;
+ platform_set_drvdata(pdev, mx3fb);
- rq.mx3fb = mx3fb;
+ rq.mx3fb = mx3fb;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_PRIVATE, mask);
- rq.id = IDMAC_SDC_0;
- chan = dma_request_channel(mask, chan_filter, &rq);
- if (!chan) {
- ret = -EBUSY;
- goto ersdc0;
- }
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dma_cap_set(DMA_PRIVATE, mask);
+ rq.id = IDMAC_SDC_0;
+ chan = dma_request_channel(mask, chan_filter, &rq);
+ if (!chan) {
+ ret = -EBUSY;
+ goto ersdc0;
+ }
- ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
- if (ret < 0)
- goto eisdc0;
+ ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+ if (ret < 0)
+ goto eisdc0;
- mx3fb->backlight_level = 255;
+ mx3fb->backlight_level = 255;
- return 0;
+ return 0;
eisdc0:
- dma_release_channel(chan);
+ dma_release_channel(chan);
ersdc0:
- dmaengine_put();
- iounmap(mx3fb->reg_base);
+ dmaengine_put();
+ iounmap(mx3fb->reg_base);
eremap:
- kfree(mx3fb);
- dev_err(dev, "mx3fb: failed to register fb\n");
- return ret;
+ kfree(mx3fb);
+ dev_err(dev, "mx3fb: failed to register fb\n");
+ return ret;
}
static int mx3fb_remove(struct platform_device *dev)
{
- struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
- struct fb_info *fbi = mx3fb->fbi;
- struct mx3fb_info *mx3_fbi = fbi->par;
- struct dma_chan *chan;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+ struct fb_info *fbi = mx3fb->fbi;
+ struct mx3fb_info *mx3_fbi = fbi->par;
+ struct dma_chan *chan;
- chan = &mx3_fbi->idmac_channel->dma_chan;
- release_fbi(fbi);
+ chan = &mx3_fbi->idmac_channel->dma_chan;
+ release_fbi(fbi);
- dma_release_channel(chan);
- dmaengine_put();
+ dma_release_channel(chan);
+ dmaengine_put();
- iounmap(mx3fb->reg_base);
- kfree(mx3fb);
- return 0;
+ iounmap(mx3fb->reg_base);
+ kfree(mx3fb);
+ return 0;
}
static struct platform_driver mx3fb_driver = {
- .driver = {
- .name = MX3FB_NAME,
- },
- .probe = mx3fb_probe,
- .remove = mx3fb_remove,
- .suspend = mx3fb_suspend,
- .resume = mx3fb_resume,
+ .driver = {
+ .name = MX3FB_NAME,
+ },
+ .probe = mx3fb_probe,
+ .remove = mx3fb_remove,
+ .suspend = mx3fb_suspend,
+ .resume = mx3fb_resume,
};
/*
* Parse user specified options (`video=mx3fb:')
* example:
- * video=mx3fb:bpp=16
+ * video=mx3fb:bpp=16
*/
static int mx3fb_setup(void)
{
#ifndef MODULE
- char *opt, *options = NULL;
+ char *opt, *options = NULL;
- if (fb_get_options("mx3fb", &options))
- return -ENODEV;
+ if (fb_get_options("mx3fb", &options))
+ return -ENODEV;
- if (!options || !*options)
- return 0;
+ if (!options || !*options)
+ return 0;
- while ((opt = strsep(&options, ",")) != NULL) {
- if (!*opt)
- continue;
- if (!strncmp(opt, "bpp=", 4))
- default_bpp = simple_strtoul(opt + 4, NULL, 0);
- else
- fb_mode = opt;
- }
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+ if (!strncmp(opt, "bpp=", 4))
+ default_bpp = simple_strtoul(opt + 4, NULL, 0);
+ else
+ fb_mode = opt;
+ }
#endif
- return 0;
+ return 0;
}
static int __init mx3fb_init(void)
{
- int ret = mx3fb_setup();
+ int ret = mx3fb_setup();
- if (ret < 0)
- return ret;
+ if (ret < 0)
+ return ret;
- ret = platform_driver_register(&mx3fb_driver);
- return ret;
+ ret = platform_driver_register(&mx3fb_driver);
+ return ret;
}
static void __exit mx3fb_exit(void)
{
- platform_driver_unregister(&mx3fb_driver);
+ platform_driver_unregister(&mx3fb_driver);
}
module_init(mx3fb_init);
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 2552b9f..84f63205 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -59,7 +59,6 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/div64.h>
-#include <mach/pxa-regs.h>
#include <mach/bitfield.h>
#include <mach/pxafb.h>
@@ -883,10 +882,21 @@
init_completion(&ofb->branch_done);
}
+static inline int pxafb_overlay_supported(void)
+{
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx())
+ return 1;
+
+ return 0;
+}
+
static int __devinit pxafb_overlay_init(struct pxafb_info *fbi)
{
int i, ret;
+ if (!pxafb_overlay_supported())
+ return 0;
+
for (i = 0; i < 2; i++) {
init_pxafb_overlay(fbi, &fbi->overlay[i], i);
ret = register_framebuffer(&fbi->overlay[i].fb);
@@ -909,6 +919,9 @@
{
int i;
+ if (!pxafb_overlay_supported())
+ return;
+
for (i = 0; i < 2; i++)
unregister_framebuffer(&fbi->overlay[i].fb);
}
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 79cf0b1..b0b4513 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1017,6 +1017,10 @@
s3c2410fb_init_registers(fbinfo);
+ /* re-activate our display after resume */
+ s3c2410fb_activate_var(fbinfo);
+ s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
+
return 0;
}
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 076f946..fad58cf 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -176,9 +176,9 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
+#include <linux/io.h>
#include <mach/hardware.h>
-#include <asm/io.h>
#include <asm/mach-types.h>
#include <mach/assabet.h>
#include <mach/shannon.h>
@@ -251,22 +251,6 @@
#endif
#endif
-#ifdef CONFIG_SA1100_H3800
-static struct sa1100fb_mach_info h3800_info __initdata = {
- .pixclock = 174757, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 3, .vsync_len = 3,
- .left_margin = 12, .upper_margin = 10,
- .right_margin = 17, .lower_margin = 1,
-
- .cmap_static = 1,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
#ifdef CONFIG_SA1100_H3600
static struct sa1100fb_mach_info h3600_info __initdata = {
.pixclock = 174757, .bpp = 16,
@@ -432,11 +416,6 @@
fbi->rgb[RGB_16] = &h3600_rgb_16;
}
#endif
-#ifdef CONFIG_SA1100_H3800
- if (machine_is_h3800()) {
- inf = &h3800_info;
- }
-#endif
#ifdef CONFIG_SA1100_COLLIE
if (machine_is_collie()) {
inf = &collie_info;
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0e2b8fd..2c5d069 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -446,7 +446,6 @@
{
struct sh_mobile_lcdc_chan *ch;
struct sh_mobile_lcdc_board_cfg *board_cfg;
- unsigned long tmp;
int k;
/* tell the board code to disable the panel */
@@ -456,9 +455,8 @@
if (board_cfg->display_off)
board_cfg->display_off(board_cfg->board_data);
- /* cleanup deferred io if SYS bus */
- tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
- if (ch->ldmt1r_value & (1 << 12) && tmp) {
+ /* cleanup deferred io if enabled */
+ if (ch->info.fbdefio) {
fb_deferred_io_cleanup(&ch->info);
ch->info.fbdefio = NULL;
}
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index b9d74d0..65244c0 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -116,7 +116,7 @@
if (!mdev)
return -ENOMEM;
- mdev->clk = clk_get(&pdev->dev, "owire_clk");
+ mdev->clk = clk_get(&pdev->dev, "owire");
if (!mdev->clk) {
err = -ENODEV;
goto failed_clk;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index c973889..a7e3b70 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -590,8 +590,8 @@
}
/* get interface & functional clock objects */
- hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick");
- hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck");
+ hdq_data->hdq_ick = clk_get(&pdev->dev, "ick");
+ hdq_data->hdq_fck = clk_get(&pdev->dev, "fck");
if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) {
dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n");
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9e1138a..a411702 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -39,7 +39,7 @@
{
struct w1_gpio_platform_data *pdata = data;
- return gpio_get_value(pdata->pin);
+ return gpio_get_value(pdata->pin) ? 1 : 0;
}
static int __init w1_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index f0c2b7a..734d980 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -269,7 +269,7 @@
bus_clk = 133; /* in MHz */
freq = fsl_get_sys_freq();
- if (freq > 0)
+ if (freq != -1)
bus_clk = freq;
/* Map devices registers into memory */
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 0b798fd..74c92d3 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,6 +21,7 @@
#include <linux/watchdog.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <mach/timex.h>
#include <mach/regs-timer.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 2f2ce74..aa5ad6e 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -60,9 +60,8 @@
void __iomem *base; /* physical */
struct device *dev;
int omap_wdt_users;
- struct clk *armwdt_ck;
- struct clk *mpu_wdt_ick;
- struct clk *mpu_wdt_fck;
+ struct clk *ick;
+ struct clk *fck;
struct resource *mem;
struct miscdevice omap_wdt_miscdev;
};
@@ -146,13 +145,8 @@
if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users)))
return -EBUSY;
- if (cpu_is_omap16xx())
- clk_enable(wdev->armwdt_ck); /* Enable the clock */
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- clk_enable(wdev->mpu_wdt_ick); /* Enable the interface clock */
- clk_enable(wdev->mpu_wdt_fck); /* Enable the functional clock */
- }
+ clk_enable(wdev->ick); /* Enable the interface clock */
+ clk_enable(wdev->fck); /* Enable the functional clock */
/* initialize prescaler */
while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
@@ -181,13 +175,8 @@
omap_wdt_disable(wdev);
- if (cpu_is_omap16xx())
- clk_disable(wdev->armwdt_ck); /* Disable the clock */
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- clk_disable(wdev->mpu_wdt_ick); /* Disable the clock */
- clk_disable(wdev->mpu_wdt_fck); /* Disable the clock */
- }
+ clk_disable(wdev->ick);
+ clk_disable(wdev->fck);
#else
printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n");
#endif
@@ -303,44 +292,19 @@
wdev->omap_wdt_users = 0;
wdev->mem = mem;
- if (cpu_is_omap16xx()) {
- wdev->armwdt_ck = clk_get(&pdev->dev, "armwdt_ck");
- if (IS_ERR(wdev->armwdt_ck)) {
- ret = PTR_ERR(wdev->armwdt_ck);
- wdev->armwdt_ck = NULL;
- goto err_clk;
- }
+ wdev->ick = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(wdev->ick)) {
+ ret = PTR_ERR(wdev->ick);
+ wdev->ick = NULL;
+ goto err_clk;
+ }
+ wdev->fck = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(wdev->fck)) {
+ ret = PTR_ERR(wdev->fck);
+ wdev->fck = NULL;
+ goto err_clk;
}
- if (cpu_is_omap24xx()) {
- wdev->mpu_wdt_ick = clk_get(&pdev->dev, "mpu_wdt_ick");
- if (IS_ERR(wdev->mpu_wdt_ick)) {
- ret = PTR_ERR(wdev->mpu_wdt_ick);
- wdev->mpu_wdt_ick = NULL;
- goto err_clk;
- }
- wdev->mpu_wdt_fck = clk_get(&pdev->dev, "mpu_wdt_fck");
- if (IS_ERR(wdev->mpu_wdt_fck)) {
- ret = PTR_ERR(wdev->mpu_wdt_fck);
- wdev->mpu_wdt_fck = NULL;
- goto err_clk;
- }
- }
-
- if (cpu_is_omap34xx()) {
- wdev->mpu_wdt_ick = clk_get(&pdev->dev, "wdt2_ick");
- if (IS_ERR(wdev->mpu_wdt_ick)) {
- ret = PTR_ERR(wdev->mpu_wdt_ick);
- wdev->mpu_wdt_ick = NULL;
- goto err_clk;
- }
- wdev->mpu_wdt_fck = clk_get(&pdev->dev, "wdt2_fck");
- if (IS_ERR(wdev->mpu_wdt_fck)) {
- ret = PTR_ERR(wdev->mpu_wdt_fck);
- wdev->mpu_wdt_fck = NULL;
- goto err_clk;
- }
- }
wdev->base = ioremap(res->start, res->end - res->start + 1);
if (!wdev->base) {
ret = -ENOMEM;
@@ -380,12 +344,10 @@
wdev->base = NULL;
err_clk:
- if (wdev->armwdt_ck)
- clk_put(wdev->armwdt_ck);
- if (wdev->mpu_wdt_ick)
- clk_put(wdev->mpu_wdt_ick);
- if (wdev->mpu_wdt_fck)
- clk_put(wdev->mpu_wdt_fck);
+ if (wdev->ick)
+ clk_put(wdev->ick);
+ if (wdev->fck)
+ clk_put(wdev->fck);
kfree(wdev);
err_kzalloc:
@@ -417,20 +379,8 @@
release_mem_region(res->start, res->end - res->start + 1);
platform_set_drvdata(pdev, NULL);
- if (wdev->armwdt_ck) {
- clk_put(wdev->armwdt_ck);
- wdev->armwdt_ck = NULL;
- }
-
- if (wdev->mpu_wdt_ick) {
- clk_put(wdev->mpu_wdt_ick);
- wdev->mpu_wdt_ick = NULL;
- }
-
- if (wdev->mpu_wdt_fck) {
- clk_put(wdev->mpu_wdt_fck);
- wdev->mpu_wdt_fck = NULL;
- }
+ clk_put(wdev->ick);
+ clk_put(wdev->fck);
iounmap(wdev->base);
kfree(wdev);
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 14a339f..b64ae1a 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -29,6 +29,7 @@
#define WDT_EN 0x0010
#define WDT_VAL (TIMER_VIRT_BASE + 0x0024)
+#define ORION5X_TCLK 166666667
#define WDT_MAX_DURATION (0xffffffff / ORION5X_TCLK)
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 57027f4..f3553fa 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -34,104 +34,89 @@
#include <asm/time.h>
#include <asm/mach-rc32434/integ.h>
-#define MAX_TIMEOUT 20
-#define RC32434_WDT_INTERVAL (15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
static struct {
- struct completion stop;
- int running;
- struct timer_list timer;
- int queue;
- int default_ticks;
unsigned long inuse;
} rc32434_wdt_device;
static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x) (x / idt_cpu_freq)
+#define SEC2WTCOMP(x) (x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+ writel((readl(&addr) | or) & ~nand, &addr)
static void rc32434_wdt_start(void)
{
- u32 val;
+ u32 or, nand;
- if (!rc32434_wdt_device.inuse) {
- writel(0, &wdt_reg->wtcount);
+ /* zero the counter before enabling */
+ writel(0, &wdt_reg->wtcount);
- val = RC32434_ERR_WRE;
- writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+ /* don't generate a non-maskable interrupt,
+ * do a warm reset instead */
+ nand = 1 << RC32434_ERR_WNE;
+ or = 1 << RC32434_ERR_WRE;
- val = RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
- }
- rc32434_wdt_device.running++;
+ /* reset the ERRCS timeout bit in case it's set */
+ nand |= 1 << RC32434_ERR_WTO;
+
+ SET_BITS(wdt_reg->errcs, or, nand);
+
+ /* reset WTC timeout bit and enable WDT */
+ nand = 1 << RC32434_WTC_TO;
+ or = 1 << RC32434_WTC_EN;
+
+ SET_BITS(wdt_reg->wtc, or, nand);
}
static void rc32434_wdt_stop(void)
{
- u32 val;
+ /* Disable WDT */
+ SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
+}
- if (rc32434_wdt_device.running) {
+static int rc32434_wdt_set(int new_timeout)
+{
+ int max_to = WTCOMP2SEC((u32)-1);
- val = ~RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
- val = ~RC32434_ERR_WRE;
- writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
-
- rc32434_wdt_device.running = 0;
+ if (new_timeout < 0 || new_timeout > max_to) {
+ printk(KERN_ERR KBUILD_MODNAME
+ ": timeout value must be between 0 and %d",
+ max_to);
+ return -EINVAL;
}
-}
-
-static void rc32434_wdt_set(int new_timeout)
-{
- u32 cmp = new_timeout * HZ;
- u32 state, val;
-
timeout = new_timeout;
- /*
- * store and disable WTC
- */
- state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
- val = ~RC32434_WTC_EN;
- writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+ writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
- writel(0, &wdt_reg->wtcount);
- writel(cmp, &wdt_reg->wtcompare);
-
- /*
- * restore WTC
- */
-
- writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+ return 0;
}
-static void rc32434_wdt_reset(void)
+static void rc32434_wdt_ping(void)
{
- ticks = rc32434_wdt_device.default_ticks;
-}
-
-static void rc32434_wdt_update(unsigned long unused)
-{
- if (rc32434_wdt_device.running)
- ticks--;
-
writel(0, &wdt_reg->wtcount);
-
- if (rc32434_wdt_device.queue && ticks)
- mod_timer(&rc32434_wdt_device.timer,
- jiffies + RC32434_WDT_INTERVAL);
- else
- complete(&rc32434_wdt_device.stop);
}
static int rc32434_wdt_open(struct inode *inode, struct file *file)
@@ -142,19 +127,23 @@
if (nowayout)
__module_get(THIS_MODULE);
+ rc32434_wdt_start();
+ rc32434_wdt_ping();
+
return nonseekable_open(inode, file);
}
static int rc32434_wdt_release(struct inode *inode, struct file *file)
{
- if (expect_close && nowayout == 0) {
+ if (expect_close == 42) {
rc32434_wdt_stop();
printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
module_put(THIS_MODULE);
- } else
+ } else {
printk(KERN_CRIT KBUILD_MODNAME
": device closed unexpectedly. WDT will not stop !\n");
-
+ rc32434_wdt_ping();
+ }
clear_bit(0, &rc32434_wdt_device.inuse);
return 0;
}
@@ -174,10 +163,10 @@
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
- expect_close = 1;
+ expect_close = 42;
}
}
- rc32434_wdt_update(0);
+ rc32434_wdt_ping();
return len;
}
return 0;
@@ -197,11 +186,11 @@
};
switch (cmd) {
case WDIOC_KEEPALIVE:
- rc32434_wdt_reset();
+ rc32434_wdt_ping();
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- value = readl(&wdt_reg->wtcount);
+ value = 0;
if (copy_to_user(argp, &value, sizeof(int)))
return -EFAULT;
break;
@@ -218,6 +207,7 @@
break;
case WDIOS_DISABLECARD:
rc32434_wdt_stop();
+ break;
default:
return -EINVAL;
}
@@ -225,11 +215,9 @@
case WDIOC_SETTIMEOUT:
if (copy_from_user(&new_timeout, argp, sizeof(int)))
return -EFAULT;
- if (new_timeout < 1)
+ if (rc32434_wdt_set(new_timeout))
return -EINVAL;
- if (new_timeout > MAX_TIMEOUT)
- return -EINVAL;
- rc32434_wdt_set(new_timeout);
+ /* Fall through */
case WDIOC_GETTIMEOUT:
return copy_to_user(argp, &timeout, sizeof(int));
default:
@@ -254,15 +242,15 @@
.fops = &rc32434_wdt_fops,
};
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
if (!r) {
printk(KERN_ERR KBUILD_MODNAME
"failed to retrieve resources\n");
@@ -277,24 +265,12 @@
}
ret = misc_register(&rc32434_wdt_miscdev);
-
if (ret < 0) {
printk(KERN_ERR KBUILD_MODNAME
"failed to register watchdog device\n");
goto unmap;
}
- init_completion(&rc32434_wdt_device.stop);
- rc32434_wdt_device.queue = 0;
-
- clear_bit(0, &rc32434_wdt_device.inuse);
-
- setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
- rc32434_wdt_device.default_ticks = ticks;
-
- rc32434_wdt_start();
-
printk(banner, timeout);
return 0;
@@ -304,23 +280,17 @@
return ret;
}
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
{
- if (rc32434_wdt_device.queue) {
- rc32434_wdt_device.queue = 0;
- wait_for_completion(&rc32434_wdt_device.stop);
- }
misc_deregister(&rc32434_wdt_miscdev);
-
iounmap(wdt_reg);
-
return 0;
}
static struct platform_driver rc32434_wdt = {
.probe = rc32434_wdt_probe,
- .remove = rc32434_wdt_remove,
- .driver = {
+ .remove = __devexit_p(rc32434_wdt_remove),
+ .driver = {
.name = "rc32434_wdt",
}
};
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index e19b457..4b84f29 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -30,7 +30,7 @@
#include <linux/timex.h>
#ifdef CONFIG_ARCH_PXA
-#include <mach/pxa-regs.h>
+#include <mach/regs-ost.h>
#endif
#include <mach/reset.h>
diff --git a/fs/aio.c b/fs/aio.c
index 8fa77e2..76da125 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -443,7 +443,7 @@
req->private = NULL;
req->ki_iovec = NULL;
INIT_LIST_HEAD(&req->ki_run_list);
- req->ki_eventfd = ERR_PTR(-EINVAL);
+ req->ki_eventfd = NULL;
/* Check if the completion queue has enough free space to
* accept an event from this io.
@@ -485,8 +485,6 @@
{
assert_spin_locked(&ctx->ctx_lock);
- if (!IS_ERR(req->ki_eventfd))
- fput(req->ki_eventfd);
if (req->ki_dtor)
req->ki_dtor(req);
if (req->ki_iovec != &req->ki_inline_vec)
@@ -508,8 +506,11 @@
list_del(&req->ki_list);
spin_unlock_irq(&fput_lock);
- /* Complete the fput */
- __fput(req->ki_filp);
+ /* Complete the fput(s) */
+ if (req->ki_filp != NULL)
+ __fput(req->ki_filp);
+ if (req->ki_eventfd != NULL)
+ __fput(req->ki_eventfd);
/* Link the iocb into the context's free list */
spin_lock_irq(&ctx->ctx_lock);
@@ -527,12 +528,14 @@
*/
static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
{
+ int schedule_putreq = 0;
+
dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
req, atomic_long_read(&req->ki_filp->f_count));
assert_spin_locked(&ctx->ctx_lock);
- req->ki_users --;
+ req->ki_users--;
BUG_ON(req->ki_users < 0);
if (likely(req->ki_users))
return 0;
@@ -540,10 +543,23 @@
req->ki_cancel = NULL;
req->ki_retry = NULL;
- /* Must be done under the lock to serialise against cancellation.
- * Call this aio_fput as it duplicates fput via the fput_work.
+ /*
+ * Try to optimize the aio and eventfd file* puts, by avoiding to
+ * schedule work in case it is not __fput() time. In normal cases,
+ * we would not be holding the last reference to the file*, so
+ * this function will be executed w/out any aio kthread wakeup.
*/
- if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
+ if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
+ schedule_putreq++;
+ else
+ req->ki_filp = NULL;
+ if (req->ki_eventfd != NULL) {
+ if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
+ schedule_putreq++;
+ else
+ req->ki_eventfd = NULL;
+ }
+ if (unlikely(schedule_putreq)) {
get_ioctx(ctx);
spin_lock(&fput_lock);
list_add(&req->ki_list, &fput_head);
@@ -571,7 +587,7 @@
static struct kioctx *lookup_ioctx(unsigned long ctx_id)
{
struct mm_struct *mm = current->mm;
- struct kioctx *ctx = NULL;
+ struct kioctx *ctx, *ret = NULL;
struct hlist_node *n;
rcu_read_lock();
@@ -579,12 +595,13 @@
hlist_for_each_entry_rcu(ctx, n, &mm->ioctx_list, list) {
if (ctx->user_id == ctx_id && !ctx->dead) {
get_ioctx(ctx);
+ ret = ctx;
break;
}
}
rcu_read_unlock();
- return ctx;
+ return ret;
}
/*
@@ -1009,7 +1026,7 @@
* eventfd. The eventfd_signal() function is safe to be called
* from IRQ context.
*/
- if (!IS_ERR(iocb->ki_eventfd))
+ if (iocb->ki_eventfd != NULL)
eventfd_signal(iocb->ki_eventfd, 1);
put_rq:
@@ -1608,6 +1625,7 @@
req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
if (IS_ERR(req->ki_eventfd)) {
ret = PTR_ERR(req->ki_eventfd);
+ req->ki_eventfd = NULL;
goto out_put_req;
}
}
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 549b014..fe2b1aa 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -685,19 +685,20 @@
* bio_integrity_clone - Callback for cloning bios with integrity metadata
* @bio: New bio
* @bio_src: Original bio
+ * @gfp_mask: Memory allocation mask
* @bs: bio_set to allocate bip from
*
* Description: Called to allocate a bip when cloning a bio
*/
int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
- struct bio_set *bs)
+ gfp_t gfp_mask, struct bio_set *bs)
{
struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
struct bio_integrity_payload *bip;
BUG_ON(bip_src == NULL);
- bip = bio_integrity_alloc_bioset(bio, GFP_NOIO, bip_src->bip_vcnt, bs);
+ bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
if (bip == NULL)
return -EIO;
diff --git a/fs/bio.c b/fs/bio.c
index 124b95c..d4f0632 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -463,10 +463,12 @@
if (bio_integrity(bio)) {
int ret;
- ret = bio_integrity_clone(b, bio, fs_bio_set);
+ ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
- if (ret < 0)
+ if (ret < 0) {
+ bio_put(b);
return NULL;
+ }
}
return b;
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 42491d7..37f31b5 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -277,7 +277,7 @@
if (*cow_ret == buf)
unlock_orig = 1;
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
if (parent)
parent_start = parent->start;
@@ -2365,7 +2365,7 @@
if (slot >= btrfs_header_nritems(upper) - 1)
return 1;
- WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+ btrfs_assert_tree_locked(path->nodes[1]);
right = read_node_slot(root, upper, slot + 1);
btrfs_tree_lock(right);
@@ -2562,7 +2562,7 @@
if (right_nritems == 0)
return 1;
- WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+ btrfs_assert_tree_locked(path->nodes[1]);
left = read_node_slot(root, path->nodes[1], slot - 1);
btrfs_tree_lock(left);
@@ -4101,7 +4101,7 @@
next = read_node_slot(root, c, slot);
if (!path->skip_locking) {
- WARN_ON(!btrfs_tree_locked(c));
+ btrfs_assert_tree_locked(c);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
}
@@ -4126,7 +4126,7 @@
reada_for_search(root, path, level, slot, 0);
next = read_node_slot(root, next, 0);
if (!path->skip_locking) {
- WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+ btrfs_assert_tree_locked(path->nodes[level]);
btrfs_tree_lock(next);
btrfs_set_lock_blocking(next);
}
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 82491ba..5e1d4e3 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -784,7 +784,14 @@
struct list_head dirty_cowonly_roots;
struct btrfs_fs_devices *fs_devices;
+
+ /*
+ * the space_info list is almost entirely read only. It only changes
+ * when we add a new raid type to the FS, and that happens
+ * very rarely. RCU is used to protect it.
+ */
struct list_head space_info;
+
spinlock_t delalloc_lock;
spinlock_t new_trans_lock;
u64 delalloc_bytes;
@@ -1797,6 +1804,8 @@
int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
+void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
+
int btrfs_check_metadata_free_space(struct btrfs_root *root);
int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
u64 bytes);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index adda739..3e18175 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -857,7 +857,7 @@
struct inode *btree_inode = root->fs_info->btree_inode;
if (btrfs_header_generation(buf) ==
root->fs_info->running_transaction->transid) {
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
/* ugh, clear_extent_buffer_dirty can be expensive */
btrfs_set_lock_blocking(buf);
@@ -2361,7 +2361,7 @@
btrfs_set_lock_blocking(buf);
- WARN_ON(!btrfs_tree_locked(buf));
+ btrfs_assert_tree_locked(buf);
if (transid != root->fs_info->generation) {
printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
"found %llu running %llu\n",
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 6b5966a..fefe83a 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -20,6 +20,7 @@
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/sort.h>
+#include <linux/rcupdate.h>
#include "compat.h"
#include "hash.h"
#include "crc32c.h"
@@ -330,13 +331,33 @@
{
struct list_head *head = &info->space_info;
struct btrfs_space_info *found;
- list_for_each_entry(found, head, list) {
- if (found->flags == flags)
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(found, head, list) {
+ if (found->flags == flags) {
+ rcu_read_unlock();
return found;
+ }
}
+ rcu_read_unlock();
return NULL;
}
+/*
+ * after adding space to the filesystem, we need to clear the full flags
+ * on all the space infos.
+ */
+void btrfs_clear_space_info_full(struct btrfs_fs_info *info)
+{
+ struct list_head *head = &info->space_info;
+ struct btrfs_space_info *found;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(found, head, list)
+ found->full = 0;
+ rcu_read_unlock();
+}
+
static u64 div_factor(u64 num, int factor)
{
if (factor == 10)
@@ -1903,7 +1924,6 @@
if (!found)
return -ENOMEM;
- list_add(&found->list, &info->space_info);
INIT_LIST_HEAD(&found->block_groups);
init_rwsem(&found->groups_sem);
spin_lock_init(&found->lock);
@@ -1917,6 +1937,7 @@
found->full = 0;
found->force_alloc = 0;
*space_info = found;
+ list_add_rcu(&found->list, &info->space_info);
return 0;
}
@@ -4418,13 +4439,13 @@
path = btrfs_alloc_path();
BUG_ON(!path);
- BUG_ON(!btrfs_tree_locked(parent));
+ btrfs_assert_tree_locked(parent);
parent_level = btrfs_header_level(parent);
extent_buffer_get(parent);
path->nodes[parent_level] = parent;
path->slots[parent_level] = btrfs_header_nritems(parent);
- BUG_ON(!btrfs_tree_locked(node));
+ btrfs_assert_tree_locked(node);
level = btrfs_header_level(node);
extent_buffer_get(node);
path->nodes[level] = node;
@@ -6320,6 +6341,7 @@
int btrfs_free_block_groups(struct btrfs_fs_info *info)
{
struct btrfs_block_group_cache *block_group;
+ struct btrfs_space_info *space_info;
struct rb_node *n;
spin_lock(&info->block_group_cache_lock);
@@ -6341,6 +6363,23 @@
spin_lock(&info->block_group_cache_lock);
}
spin_unlock(&info->block_group_cache_lock);
+
+ /* now that all the block groups are freed, go through and
+ * free all the space_info structs. This is only called during
+ * the final stages of unmount, and so we know nobody is
+ * using them. We call synchronize_rcu() once before we start,
+ * just to be on the safe side.
+ */
+ synchronize_rcu();
+
+ while(!list_empty(&info->space_info)) {
+ space_info = list_entry(info->space_info.next,
+ struct btrfs_space_info,
+ list);
+
+ list_del(&space_info->list);
+ kfree(space_info);
+ }
return 0;
}
diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c
index 85506c4..47b0a88 100644
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -220,8 +220,8 @@
return 0;
}
-int btrfs_tree_locked(struct extent_buffer *eb)
+void btrfs_assert_tree_locked(struct extent_buffer *eb)
{
- return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) ||
- spin_is_locked(&eb->lock);
+ if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+ assert_spin_locked(&eb->lock);
}
diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h
index 6bb0afb..6c4ce45 100644
--- a/fs/btrfs/locking.h
+++ b/fs/btrfs/locking.h
@@ -21,11 +21,11 @@
int btrfs_tree_lock(struct extent_buffer *eb);
int btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_tree_locked(struct extent_buffer *eb);
int btrfs_try_tree_lock(struct extent_buffer *eb);
int btrfs_try_spin_lock(struct extent_buffer *eb);
void btrfs_set_lock_blocking(struct extent_buffer *eb);
void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+void btrfs_assert_tree_locked(struct extent_buffer *eb);
#endif
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 1316139..dd06e18 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1374,6 +1374,12 @@
ret = btrfs_add_device(trans, root, device);
}
+ /*
+ * we've got more storage, clear any full flags on the space
+ * infos
+ */
+ btrfs_clear_space_info_full(root->fs_info);
+
unlock_chunks(root);
btrfs_commit_transaction(trans, root);
@@ -1459,6 +1465,8 @@
device->fs_devices->total_rw_bytes += diff;
device->total_bytes = new_size;
+ btrfs_clear_space_info_full(device->dev_root->fs_info);
+
return btrfs_update_device(trans, device);
}
diff --git a/fs/buffer.c b/fs/buffer.c
index 9f69741..891e1c7 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -760,15 +760,9 @@
* If warn is true, then emit a warning if the page is not uptodate and has
* not been truncated.
*/
-static int __set_page_dirty(struct page *page,
+static void __set_page_dirty(struct page *page,
struct address_space *mapping, int warn)
{
- if (unlikely(!mapping))
- return !TestSetPageDirty(page);
-
- if (TestSetPageDirty(page))
- return 0;
-
spin_lock_irq(&mapping->tree_lock);
if (page->mapping) { /* Race with truncate? */
WARN_ON_ONCE(warn && !PageUptodate(page));
@@ -785,8 +779,6 @@
}
spin_unlock_irq(&mapping->tree_lock);
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
-
- return 1;
}
/*
@@ -816,6 +808,7 @@
*/
int __set_page_dirty_buffers(struct page *page)
{
+ int newly_dirty;
struct address_space *mapping = page_mapping(page);
if (unlikely(!mapping))
@@ -831,9 +824,12 @@
bh = bh->b_this_page;
} while (bh != head);
}
+ newly_dirty = !TestSetPageDirty(page);
spin_unlock(&mapping->private_lock);
- return __set_page_dirty(page, mapping, 1);
+ if (newly_dirty)
+ __set_page_dirty(page, mapping, 1);
+ return newly_dirty;
}
EXPORT_SYMBOL(__set_page_dirty_buffers);
@@ -1262,8 +1258,11 @@
return;
}
- if (!test_set_buffer_dirty(bh))
- __set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0);
+ if (!test_set_buffer_dirty(bh)) {
+ struct page *page = bh->b_page;
+ if (!TestSetPageDirty(page))
+ __set_page_dirty(page, page_mapping(page), 0);
+ }
}
/*
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 5f3231b..bff4052 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -198,9 +198,6 @@
fsi->ptmx_dentry = dentry;
rc = 0;
-
- printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
- inode->i_ino);
out:
mutex_unlock(&root->d_inode->i_mutex);
return rc;
@@ -369,8 +366,6 @@
struct pts_fs_info *fsi;
struct pts_mount_opts *opts;
- printk(KERN_NOTICE "devpts: newinstance mount\n");
-
err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
if (err)
return err;
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index f6caeb1..8b65f28 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -946,6 +946,8 @@
list_for_each_entry(global_auth_tok,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
+ if (global_auth_tok->flags & ECRYPTFS_AUTH_TOK_FNEK)
+ continue;
rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
if (rc) {
printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
@@ -1322,14 +1324,13 @@
}
static int
-ecryptfs_write_metadata_to_contents(struct ecryptfs_crypt_stat *crypt_stat,
- struct dentry *ecryptfs_dentry,
- char *virt)
+ecryptfs_write_metadata_to_contents(struct dentry *ecryptfs_dentry,
+ char *virt, size_t virt_len)
{
int rc;
rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
- 0, crypt_stat->num_header_bytes_at_front);
+ 0, virt_len);
if (rc)
printk(KERN_ERR "%s: Error attempting to write header "
"information to lower file; rc = [%d]\n", __func__,
@@ -1339,7 +1340,6 @@
static int
ecryptfs_write_metadata_to_xattr(struct dentry *ecryptfs_dentry,
- struct ecryptfs_crypt_stat *crypt_stat,
char *page_virt, size_t size)
{
int rc;
@@ -1349,6 +1349,17 @@
return rc;
}
+static unsigned long ecryptfs_get_zeroed_pages(gfp_t gfp_mask,
+ unsigned int order)
+{
+ struct page *page;
+
+ page = alloc_pages(gfp_mask | __GFP_ZERO, order);
+ if (page)
+ return (unsigned long) page_address(page);
+ return 0;
+}
+
/**
* ecryptfs_write_metadata
* @ecryptfs_dentry: The eCryptfs dentry
@@ -1365,7 +1376,9 @@
{
struct ecryptfs_crypt_stat *crypt_stat =
&ecryptfs_inode_to_private(ecryptfs_dentry->d_inode)->crypt_stat;
+ unsigned int order;
char *virt;
+ size_t virt_len;
size_t size = 0;
int rc = 0;
@@ -1381,33 +1394,35 @@
rc = -EINVAL;
goto out;
}
+ virt_len = crypt_stat->num_header_bytes_at_front;
+ order = get_order(virt_len);
/* Released in this function */
- virt = (char *)get_zeroed_page(GFP_KERNEL);
+ virt = (char *)ecryptfs_get_zeroed_pages(GFP_KERNEL, order);
if (!virt) {
printk(KERN_ERR "%s: Out of memory\n", __func__);
rc = -ENOMEM;
goto out;
}
- rc = ecryptfs_write_headers_virt(virt, PAGE_CACHE_SIZE, &size,
- crypt_stat, ecryptfs_dentry);
+ rc = ecryptfs_write_headers_virt(virt, virt_len, &size, crypt_stat,
+ ecryptfs_dentry);
if (unlikely(rc)) {
printk(KERN_ERR "%s: Error whilst writing headers; rc = [%d]\n",
__func__, rc);
goto out_free;
}
if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
- rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry,
- crypt_stat, virt, size);
+ rc = ecryptfs_write_metadata_to_xattr(ecryptfs_dentry, virt,
+ size);
else
- rc = ecryptfs_write_metadata_to_contents(crypt_stat,
- ecryptfs_dentry, virt);
+ rc = ecryptfs_write_metadata_to_contents(ecryptfs_dentry, virt,
+ virt_len);
if (rc) {
printk(KERN_ERR "%s: Error writing metadata out to lower file; "
"rc = [%d]\n", __func__, rc);
goto out_free;
}
out_free:
- free_page((unsigned long)virt);
+ free_pages((unsigned long)virt, order);
out:
return rc;
}
@@ -2206,17 +2221,19 @@
struct dentry *ecryptfs_dir_dentry,
const char *name, size_t name_size)
{
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
+ &ecryptfs_superblock_to_private(
+ ecryptfs_dir_dentry->d_sb)->mount_crypt_stat;
char *decoded_name;
size_t decoded_name_size;
size_t packet_size;
int rc = 0;
- if ((name_size > ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE)
+ if ((mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+ && !(mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
+ && (name_size > ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE)
&& (strncmp(name, ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX,
ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE) == 0)) {
- struct ecryptfs_mount_crypt_stat *mount_crypt_stat =
- &ecryptfs_superblock_to_private(
- ecryptfs_dir_dentry->d_sb)->mount_crypt_stat;
const char *orig_name = name;
size_t orig_name_size = name_size;
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index c11fc95..ac749d4 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -328,6 +328,7 @@
*/
struct ecryptfs_global_auth_tok {
#define ECRYPTFS_AUTH_TOK_INVALID 0x00000001
+#define ECRYPTFS_AUTH_TOK_FNEK 0x00000002
u32 flags;
struct list_head mount_crypt_stat_list;
struct key *global_auth_tok_key;
@@ -619,7 +620,6 @@
u32 flags);
int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
struct dentry *lower_dentry,
- struct ecryptfs_crypt_stat *crypt_stat,
struct inode *ecryptfs_dir_inode,
struct nameidata *ecryptfs_nd);
int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
@@ -696,7 +696,7 @@
int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig);
int
ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
- char *sig);
+ char *sig, u32 global_auth_tok_flags);
int ecryptfs_get_global_auth_tok_for_sig(
struct ecryptfs_global_auth_tok **global_auth_tok,
struct ecryptfs_mount_crypt_stat *mount_crypt_stat, char *sig);
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 5697899..55b3145 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -246,7 +246,6 @@
*/
int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
struct dentry *lower_dentry,
- struct ecryptfs_crypt_stat *crypt_stat,
struct inode *ecryptfs_dir_inode,
struct nameidata *ecryptfs_nd)
{
@@ -254,6 +253,7 @@
struct vfsmount *lower_mnt;
struct inode *lower_inode;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+ struct ecryptfs_crypt_stat *crypt_stat;
char *page_virt = NULL;
u64 file_size;
int rc = 0;
@@ -314,6 +314,11 @@
goto out_free_kmem;
}
}
+ crypt_stat = &ecryptfs_inode_to_private(
+ ecryptfs_dentry->d_inode)->crypt_stat;
+ /* TODO: lock for crypt_stat comparison */
+ if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
+ ecryptfs_set_default_sizes(crypt_stat);
rc = ecryptfs_read_and_validate_header_region(page_virt,
ecryptfs_dentry->d_inode);
if (rc) {
@@ -362,9 +367,7 @@
{
char *encrypted_and_encoded_name = NULL;
size_t encrypted_and_encoded_name_size;
- struct ecryptfs_crypt_stat *crypt_stat = NULL;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
- struct ecryptfs_inode_info *inode_info;
struct dentry *lower_dir_dentry, *lower_dentry;
int rc = 0;
@@ -388,26 +391,15 @@
}
if (lower_dentry->d_inode)
goto lookup_and_interpose;
- inode_info = ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
- if (inode_info) {
- crypt_stat = &inode_info->crypt_stat;
- /* TODO: lock for crypt_stat comparison */
- if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED))
- ecryptfs_set_default_sizes(crypt_stat);
- }
- if (crypt_stat)
- mount_crypt_stat = crypt_stat->mount_crypt_stat;
- else
- mount_crypt_stat = &ecryptfs_superblock_to_private(
- ecryptfs_dentry->d_sb)->mount_crypt_stat;
- if (!(crypt_stat && (crypt_stat->flags & ECRYPTFS_ENCRYPT_FILENAMES))
- && !(mount_crypt_stat && (mount_crypt_stat->flags
- & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)))
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ ecryptfs_dentry->d_sb)->mount_crypt_stat;
+ if (!(mount_crypt_stat
+ && (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)))
goto lookup_and_interpose;
dput(lower_dentry);
rc = ecryptfs_encrypt_and_encode_filename(
&encrypted_and_encoded_name, &encrypted_and_encoded_name_size,
- crypt_stat, mount_crypt_stat, ecryptfs_dentry->d_name.name,
+ NULL, mount_crypt_stat, ecryptfs_dentry->d_name.name,
ecryptfs_dentry->d_name.len);
if (rc) {
printk(KERN_ERR "%s: Error attempting to encrypt and encode "
@@ -426,7 +418,7 @@
}
lookup_and_interpose:
rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
- crypt_stat, ecryptfs_dir_inode,
+ ecryptfs_dir_inode,
ecryptfs_nd);
goto out;
out_d_drop:
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index ff53942..e4a6223 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -2375,7 +2375,7 @@
int
ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
- char *sig)
+ char *sig, u32 global_auth_tok_flags)
{
struct ecryptfs_global_auth_tok *new_auth_tok;
int rc = 0;
@@ -2389,6 +2389,7 @@
goto out;
}
memcpy(new_auth_tok->sig, sig, ECRYPTFS_SIG_SIZE_HEX);
+ new_auth_tok->flags = global_auth_tok_flags;
new_auth_tok->sig[ECRYPTFS_SIG_SIZE_HEX] = '\0';
mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
list_add(&new_auth_tok->mount_crypt_stat_list,
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 789cf2e..aed56c2 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -319,7 +319,7 @@
case ecryptfs_opt_ecryptfs_sig:
sig_src = args[0].from;
rc = ecryptfs_add_global_auth_tok(mount_crypt_stat,
- sig_src);
+ sig_src, 0);
if (rc) {
printk(KERN_ERR "Error attempting to register "
"global sig; rc = [%d]\n", rc);
@@ -370,7 +370,8 @@
ECRYPTFS_SIG_SIZE_HEX] = '\0';
rc = ecryptfs_add_global_auth_tok(
mount_crypt_stat,
- mount_crypt_stat->global_default_fnek_sig);
+ mount_crypt_stat->global_default_fnek_sig,
+ ECRYPTFS_AUTH_TOK_FNEK);
if (rc) {
printk(KERN_ERR "Error attempting to register "
"global fnek sig [%s]; rc = [%d]\n",
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e2eab19..e0aa4fe 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1122,7 +1122,8 @@
struct ext4_extent_idx *ix;
struct ext4_extent *ex;
ext4_fsblk_t block;
- int depth, ee_len;
+ int depth; /* Note, NOT eh_depth; depth from top of tree */
+ int ee_len;
BUG_ON(path == NULL);
depth = path->p_depth;
@@ -1179,7 +1180,8 @@
if (bh == NULL)
return -EIO;
eh = ext_block_hdr(bh);
- if (ext4_ext_check_header(inode, eh, depth)) {
+ /* subtract from p_depth to get proper eh_depth */
+ if (ext4_ext_check_header(inode, eh, path->p_depth - depth)) {
put_bh(bh);
return -EIO;
}
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f18a919..2d2b358 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -188,7 +188,7 @@
struct ext4_group_desc *gdp;
struct ext4_super_block *es;
struct ext4_sb_info *sbi;
- int fatal = 0, err, count;
+ int fatal = 0, err, count, cleared;
ext4_group_t flex_group;
if (atomic_read(&inode->i_count) > 1) {
@@ -248,8 +248,10 @@
goto error_return;
/* Ok, now we can actually update the inode bitmaps.. */
- if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
- bit, bitmap_bh->b_data))
+ spin_lock(sb_bgl_lock(sbi, block_group));
+ cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+ spin_unlock(sb_bgl_lock(sbi, block_group));
+ if (!cleared)
ext4_error(sb, "ext4_free_inode",
"bit already cleared for inode %lu", ino);
else {
@@ -696,6 +698,7 @@
struct inode *ret;
ext4_group_t i;
int free = 0;
+ static int once = 1;
ext4_group_t flex_group;
/* Cannot create files in a deleted directory */
@@ -717,7 +720,8 @@
ret2 = find_group_flex(sb, dir, &group);
if (ret2 == -1) {
ret2 = find_group_other(sb, dir, &group);
- if (ret2 == 0 && printk_ratelimit())
+ if (ret2 == 0 && once)
+ once = 0;
printk(KERN_NOTICE "ext4: find_group_flex "
"failed, fallback succeeded dir %lu\n",
dir->i_ino);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 4415bee..9f61e62 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1447,7 +1447,7 @@
struct ext4_free_extent *gex = &ac->ac_g_ex;
BUG_ON(ex->fe_len <= 0);
- BUG_ON(ex->fe_len >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+ BUG_ON(ex->fe_len > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
BUG_ON(ex->fe_start >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
BUG_ON(ac->ac_status != AC_STATUS_CONTINUE);
@@ -3292,7 +3292,7 @@
}
BUG_ON(start + size <= ac->ac_o_ex.fe_logical &&
start > ac->ac_o_ex.fe_logical);
- BUG_ON(size <= 0 || size >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+ BUG_ON(size <= 0 || size > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
/* now prepare goal request */
@@ -3589,6 +3589,7 @@
struct super_block *sb, struct ext4_prealloc_space *pa)
{
ext4_group_t grp;
+ ext4_fsblk_t grp_blk;
if (!atomic_dec_and_test(&pa->pa_count) || pa->pa_free != 0)
return;
@@ -3603,8 +3604,12 @@
pa->pa_deleted = 1;
spin_unlock(&pa->pa_lock);
- /* -1 is to protect from crossing allocation group */
- ext4_get_group_no_and_offset(sb, pa->pa_pstart - 1, &grp, NULL);
+ grp_blk = pa->pa_pstart;
+ /* If linear, pa_pstart may be in the next group when pa is used up */
+ if (pa->pa_linear)
+ grp_blk--;
+
+ ext4_get_group_no_and_offset(sb, grp_blk, &grp, NULL);
/*
* possible race:
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 6b74d09..de0004f 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -202,9 +202,9 @@
sector_t blocknr;
/* fat_get_cluster() assumes the requested blocknr isn't truncated. */
- mutex_lock(&mapping->host->i_mutex);
+ down_read(&mapping->host->i_alloc_sem);
blocknr = generic_block_bmap(mapping, block, fat_get_block);
- mutex_unlock(&mapping->host->i_mutex);
+ up_read(&mapping->host->i_alloc_sem);
return blocknr;
}
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index e5eaa62..e3fe991 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -274,6 +274,7 @@
int ret;
BUG_ON(inode->i_state & I_SYNC);
+ WARN_ON(inode->i_state & I_NEW);
/* Set I_SYNC, reset I_DIRTY */
dirty = inode->i_state & I_DIRTY;
@@ -298,6 +299,7 @@
}
spin_lock(&inode_lock);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state &= ~I_SYNC;
if (!(inode->i_state & I_FREEING)) {
if (!(inode->i_state & I_DIRTY) &&
@@ -470,6 +472,11 @@
break;
}
+ if (inode->i_state & I_NEW) {
+ requeue_io(inode);
+ continue;
+ }
+
if (wbc->nonblocking && bdi_write_congested(bdi)) {
wbc->encountered_congestion = 1;
if (!sb_is_blkdev_sb(sb))
@@ -531,7 +538,7 @@
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
struct address_space *mapping;
- if (inode->i_state & (I_FREEING|I_WILL_FREE))
+ if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
continue;
mapping = inode->i_mapping;
if (mapping->nrpages == 0)
diff --git a/fs/inode.c b/fs/inode.c
index 913ab2d..826fb0b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -359,6 +359,7 @@
invalidate_inode_buffers(inode);
if (!atomic_read(&inode->i_count)) {
list_move(&inode->i_list, dispose);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
count++;
continue;
@@ -460,6 +461,7 @@
continue;
}
list_move(&inode->i_list, &freeable);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
nr_pruned++;
}
@@ -656,6 +658,7 @@
* just created it (so there can be no old holders
* that haven't tested I_LOCK).
*/
+ WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
inode->i_state &= ~(I_LOCK|I_NEW);
wake_up_inode(inode);
}
@@ -1145,6 +1148,7 @@
list_del_init(&inode->i_list);
list_del_init(&inode->i_sb_list);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
@@ -1186,16 +1190,19 @@
spin_unlock(&inode_lock);
return;
}
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_WILL_FREE;
spin_unlock(&inode_lock);
write_inode_now(inode, 1);
spin_lock(&inode_lock);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state &= ~I_WILL_FREE;
inodes_stat.nr_unused--;
hlist_del_init(&inode->i_hash);
}
list_del_init(&inode->i_list);
list_del_init(&inode->i_sb_list);
+ WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c
index 1f3b0fc..aedc47a 100644
--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -139,6 +139,55 @@
return 0;
}
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static const struct in6_addr *nlmclnt_map_v4addr(const struct sockaddr *sap,
+ struct in6_addr *addr_mapped)
+{
+ const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
+
+ switch (sap->sa_family) {
+ case AF_INET6:
+ return &((const struct sockaddr_in6 *)sap)->sin6_addr;
+ case AF_INET:
+ ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, addr_mapped);
+ return addr_mapped;
+ }
+
+ return NULL;
+}
+
+/*
+ * If lockd is using a PF_INET6 listener, all incoming requests appear
+ * to come from AF_INET6 remotes. The address of AF_INET remotes are
+ * mapped to AF_INET6 automatically by the network layer. In case the
+ * user passed an AF_INET server address at mount time, ensure both
+ * addresses are AF_INET6 before comparing them.
+ */
+static int nlmclnt_cmp_addr(const struct nlm_host *host,
+ const struct sockaddr *sap)
+{
+ const struct in6_addr *addr1;
+ const struct in6_addr *addr2;
+ struct in6_addr addr1_mapped;
+ struct in6_addr addr2_mapped;
+
+ addr1 = nlmclnt_map_v4addr(nlm_addr(host), &addr1_mapped);
+ if (likely(addr1 != NULL)) {
+ addr2 = nlmclnt_map_v4addr(sap, &addr2_mapped);
+ if (likely(addr2 != NULL))
+ return ipv6_addr_equal(addr1, addr2);
+ }
+
+ return 0;
+}
+#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+static int nlmclnt_cmp_addr(const struct nlm_host *host,
+ const struct sockaddr *sap)
+{
+ return nlm_cmp_addr(nlm_addr(host), sap);
+}
+#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+
/*
* The server lockd has called us back to tell us the lock was granted
*/
@@ -166,7 +215,7 @@
*/
if (fl_blocked->fl_u.nfs_fl.owner->pid != lock->svid)
continue;
- if (!nlm_cmp_addr(nlm_addr(block->b_host), addr))
+ if (!nlmclnt_cmp_addr(block->b_host, addr))
continue;
if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_path.dentry->d_inode) ,fh) != 0)
continue;
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index d1d1eb8..618865b 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
- * Copyright (C) 1996 Gertjan van Wingerde (gertjan@cs.vu.nl)
+ * Copyright (C) 1996 Gertjan van Wingerde
* Minix V2 fs support.
*
* Modified for 680x0 by Andreas Schwab
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 9b728f3..574158a 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -255,6 +255,32 @@
}
return 0;
}
+
+/*
+ * Test if two ip6 socket addresses refer to the same socket by
+ * comparing relevant fields. The padding bytes specifically, are not
+ * compared. sin6_flowinfo is not compared because it only affects QoS
+ * and sin6_scope_id is only compared if the address is "link local"
+ * because "link local" addresses need only be unique to a specific
+ * link. Conversely, ordinary unicast addresses might have different
+ * sin6_scope_id.
+ *
+ * The caller should ensure both socket addresses are AF_INET6.
+ */
+static int nfs_sockaddr_cmp_ip6(const struct sockaddr *sa1,
+ const struct sockaddr *sa2)
+{
+ const struct sockaddr_in6 *saddr1 = (const struct sockaddr_in6 *)sa1;
+ const struct sockaddr_in6 *saddr2 = (const struct sockaddr_in6 *)sa2;
+
+ if (!ipv6_addr_equal(&saddr1->sin6_addr,
+ &saddr1->sin6_addr))
+ return 0;
+ if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL &&
+ saddr1->sin6_scope_id != saddr2->sin6_scope_id)
+ return 0;
+ return saddr1->sin6_port == saddr2->sin6_port;
+}
#else
static int nfs_sockaddr_match_ipaddr4(const struct sockaddr_in *sa1,
const struct sockaddr_in *sa2)
@@ -270,9 +296,52 @@
return nfs_sockaddr_match_ipaddr4((const struct sockaddr_in *)sa1,
(const struct sockaddr_in *)sa2);
}
+
+static int nfs_sockaddr_cmp_ip6(const struct sockaddr * sa1,
+ const struct sockaddr * sa2)
+{
+ return 0;
+}
#endif
/*
+ * Test if two ip4 socket addresses refer to the same socket, by
+ * comparing relevant fields. The padding bytes specifically, are
+ * not compared.
+ *
+ * The caller should ensure both socket addresses are AF_INET.
+ */
+static int nfs_sockaddr_cmp_ip4(const struct sockaddr *sa1,
+ const struct sockaddr *sa2)
+{
+ const struct sockaddr_in *saddr1 = (const struct sockaddr_in *)sa1;
+ const struct sockaddr_in *saddr2 = (const struct sockaddr_in *)sa2;
+
+ if (saddr1->sin_addr.s_addr != saddr2->sin_addr.s_addr)
+ return 0;
+ return saddr1->sin_port == saddr2->sin_port;
+}
+
+/*
+ * Test if two socket addresses represent the same actual socket,
+ * by comparing (only) relevant fields.
+ */
+static int nfs_sockaddr_cmp(const struct sockaddr *sa1,
+ const struct sockaddr *sa2)
+{
+ if (sa1->sa_family != sa2->sa_family)
+ return 0;
+
+ switch (sa1->sa_family) {
+ case AF_INET:
+ return nfs_sockaddr_cmp_ip4(sa1, sa2);
+ case AF_INET6:
+ return nfs_sockaddr_cmp_ip6(sa1, sa2);
+ }
+ return 0;
+}
+
+/*
* Find a client by IP address and protocol version
* - returns NULL if no such client
*/
@@ -344,8 +413,10 @@
static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *data)
{
struct nfs_client *clp;
+ const struct sockaddr *sap = data->addr;
list_for_each_entry(clp, &nfs_client_list, cl_share_link) {
+ const struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr;
/* Don't match clients that failed to initialise properly */
if (clp->cl_cons_state < 0)
continue;
@@ -358,7 +429,7 @@
continue;
/* Match the full socket address */
- if (memcmp(&clp->cl_addr, data->addr, sizeof(clp->cl_addr)) != 0)
+ if (!nfs_sockaddr_cmp(sap, clap))
continue;
atomic_inc(&clp->cl_count);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index e35c819..672368f 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1892,8 +1892,14 @@
cache.cred = cred;
cache.jiffies = jiffies;
status = NFS_PROTO(inode)->access(inode, &cache);
- if (status != 0)
+ if (status != 0) {
+ if (status == -ESTALE) {
+ nfs_zap_caches(inode);
+ if (!S_ISDIR(inode->i_mode))
+ set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+ }
return status;
+ }
nfs_access_add_cache(inode, &cache);
out:
if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index cef6255..6bbf0e6 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -292,7 +292,7 @@
{
struct nfs_server *server = NFS_SERVER(inode);
struct nfs_fattr fattr;
- struct page *pages[NFSACL_MAXPAGES] = { };
+ struct page *pages[NFSACL_MAXPAGES];
struct nfs3_setaclargs args = {
.inode = inode,
.mask = NFS_ACL,
@@ -303,7 +303,7 @@
.rpc_argp = &args,
.rpc_resp = &fattr,
};
- int status, count;
+ int status;
status = -EOPNOTSUPP;
if (!nfs_server_capable(inode, NFS_CAP_ACLS))
@@ -319,6 +319,20 @@
if (S_ISDIR(inode->i_mode)) {
args.mask |= NFS_DFACL;
args.acl_default = dfacl;
+ args.len = nfsacl_size(acl, dfacl);
+ } else
+ args.len = nfsacl_size(acl, NULL);
+
+ if (args.len > NFS_ACL_INLINE_BUFSIZE) {
+ unsigned int npages = 1 + ((args.len - 1) >> PAGE_SHIFT);
+
+ status = -ENOMEM;
+ do {
+ args.pages[args.npages] = alloc_page(GFP_KERNEL);
+ if (args.pages[args.npages] == NULL)
+ goto out_freepages;
+ args.npages++;
+ } while (args.npages < npages);
}
dprintk("NFS call setacl\n");
@@ -329,10 +343,6 @@
nfs_zap_acl_cache(inode);
dprintk("NFS reply setacl: %d\n", status);
- /* pages may have been allocated at the xdr layer. */
- for (count = 0; count < NFSACL_MAXPAGES && args.pages[count]; count++)
- __free_page(args.pages[count]);
-
switch (status) {
case 0:
status = nfs_refresh_inode(inode, &fattr);
@@ -346,6 +356,11 @@
case -ENOTSUPP:
status = -EOPNOTSUPP;
}
+out_freepages:
+ while (args.npages != 0) {
+ args.npages--;
+ __free_page(args.pages[args.npages]);
+ }
out:
return status;
}
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 11cddde..6cdeacf 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -82,8 +82,10 @@
#define NFS3_commitres_sz (1+NFS3_wcc_data_sz+2)
#define ACL3_getaclargs_sz (NFS3_fh_sz+1)
-#define ACL3_setaclargs_sz (NFS3_fh_sz+1+2*(2+5*3))
-#define ACL3_getaclres_sz (1+NFS3_post_op_attr_sz+1+2*(2+5*3))
+#define ACL3_setaclargs_sz (NFS3_fh_sz+1+ \
+ XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
+#define ACL3_getaclres_sz (1+NFS3_post_op_attr_sz+1+ \
+ XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
#define ACL3_setaclres_sz (1+NFS3_post_op_attr_sz)
/*
@@ -703,28 +705,18 @@
struct nfs3_setaclargs *args)
{
struct xdr_buf *buf = &req->rq_snd_buf;
- unsigned int base, len_in_head, len = nfsacl_size(
- (args->mask & NFS_ACL) ? args->acl_access : NULL,
- (args->mask & NFS_DFACL) ? args->acl_default : NULL);
- int count, err;
+ unsigned int base;
+ int err;
p = xdr_encode_fhandle(p, NFS_FH(args->inode));
*p++ = htonl(args->mask);
- base = (char *)p - (char *)buf->head->iov_base;
- /* put as much of the acls into head as possible. */
- len_in_head = min_t(unsigned int, buf->head->iov_len - base, len);
- len -= len_in_head;
- req->rq_slen = xdr_adjust_iovec(req->rq_svec, p + (len_in_head >> 2));
+ req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+ base = req->rq_slen;
- for (count = 0; (count << PAGE_SHIFT) < len; count++) {
- args->pages[count] = alloc_page(GFP_KERNEL);
- if (!args->pages[count]) {
- while (count)
- __free_page(args->pages[--count]);
- return -ENOMEM;
- }
- }
- xdr_encode_pages(buf, args->pages, 0, len);
+ if (args->npages != 0)
+ xdr_encode_pages(buf, args->pages, 0, args->len);
+ else
+ req->rq_slen += args->len;
err = nfsacl_encode(buf, base, args->inode,
(args->mask & NFS_ACL) ?
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 30befc3..2a2a0a7 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -21,7 +21,9 @@
#define NFSDBG_FACILITY NFSDBG_VFS
/*
- * Check if fs_root is valid
+ * Convert the NFSv4 pathname components into a standard posix path.
+ *
+ * Note that the resulting string will be placed at the end of the buffer
*/
static inline char *nfs4_pathname_string(const struct nfs4_pathname *pathname,
char *buffer, ssize_t buflen)
@@ -99,21 +101,20 @@
{
struct vfsmount *mnt = ERR_PTR(-ENOENT);
char *mnt_path;
- int page2len;
+ unsigned int maxbuflen;
unsigned int s;
mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE);
if (IS_ERR(mnt_path))
return mnt;
mountdata->mnt_path = mnt_path;
- page2 += strlen(mnt_path) + 1;
- page2len = PAGE_SIZE - strlen(mnt_path) - 1;
+ maxbuflen = mnt_path - 1 - page2;
for (s = 0; s < location->nservers; s++) {
const struct nfs4_string *buf = &location->servers[s];
struct sockaddr_storage addr;
- if (buf->len <= 0 || buf->len >= PAGE_SIZE)
+ if (buf->len <= 0 || buf->len >= maxbuflen)
continue;
mountdata->addr = (struct sockaddr *)&addr;
@@ -126,8 +127,8 @@
continue;
nfs_set_port(mountdata->addr, NFS_PORT);
- strncpy(page2, buf->data, page2len);
- page2[page2len] = '\0';
+ memcpy(page2, buf->data, buf->len);
+ page2[buf->len] = '\0';
mountdata->hostname = page2;
snprintf(page, PAGE_SIZE, "%s:%s",
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index f65953b..9250067 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2596,6 +2596,7 @@
[OP_LOOKUPP] = (nfsd4_enc)nfsd4_encode_noop,
[OP_NVERIFY] = (nfsd4_enc)nfsd4_encode_noop,
[OP_OPEN] = (nfsd4_enc)nfsd4_encode_open,
+ [OP_OPENATTR] = (nfsd4_enc)nfsd4_encode_noop,
[OP_OPEN_CONFIRM] = (nfsd4_enc)nfsd4_encode_open_confirm,
[OP_OPEN_DOWNGRADE] = (nfsd4_enc)nfsd4_encode_open_downgrade,
[OP_PUTFH] = (nfsd4_enc)nfsd4_encode_noop,
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 3a9e5de..19e3a96 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -176,7 +176,8 @@
BUG_ON(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL);
mlog_bug_on_msg(!ocfs2_sparse_alloc(osb) &&
- (OCFS2_I(inode)->ip_clusters != rec->e_cpos),
+ (OCFS2_I(inode)->ip_clusters !=
+ le32_to_cpu(rec->e_cpos)),
"Device %s, asking for sparse allocation: inode %llu, "
"cpos %u, clusters %u\n",
osb->dev_str,
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index a067a6c..8e1709a 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -227,7 +227,7 @@
size = i_size_read(inode);
if (size > PAGE_CACHE_SIZE ||
- size > ocfs2_max_inline_data(inode->i_sb)) {
+ size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) {
ocfs2_error(inode->i_sb,
"Inode %llu has with inline data has bad size: %Lu",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
@@ -1555,6 +1555,7 @@
int ret, written = 0;
loff_t end = pos + len;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ struct ocfs2_dinode *di = NULL;
mlog(0, "Inode %llu, write of %u bytes at off %llu. features: 0x%x\n",
(unsigned long long)oi->ip_blkno, len, (unsigned long long)pos,
@@ -1587,7 +1588,9 @@
/*
* Check whether the write can fit.
*/
- if (mmap_page || end > ocfs2_max_inline_data(inode->i_sb))
+ di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
+ if (mmap_page ||
+ end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di))
return 0;
do_inline_write:
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 084aba8..4b11762 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -532,7 +532,8 @@
fe->i_dyn_features = cpu_to_le16(feat | OCFS2_INLINE_DATA_FL);
- fe->id2.i_data.id_count = cpu_to_le16(ocfs2_max_inline_data(osb->sb));
+ fe->id2.i_data.id_count = cpu_to_le16(
+ ocfs2_max_inline_data_with_xattr(osb->sb, fe));
} else {
fel = &fe->id2.i_list;
fel->l_tree_depth = 0;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index c7ae45a..2332ef7 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -1070,12 +1070,6 @@
offsetof(struct ocfs2_dinode, id2.i_symlink);
}
-static inline int ocfs2_max_inline_data(struct super_block *sb)
-{
- return sb->s_blocksize -
- offsetof(struct ocfs2_dinode, id2.i_data.id_data);
-}
-
static inline int ocfs2_max_inline_data_with_xattr(struct super_block *sb,
struct ocfs2_dinode *di)
{
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 4ddd788..2563df8 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -547,8 +547,12 @@
* when blocksize = 512, may reserve one more cluser for
* xattr bucket, otherwise reserve one metadata block
* for them is ok.
+ * If this is a new directory with inline data,
+ * we choose to reserve the entire inline area for
+ * directory contents and force an external xattr block.
*/
if (dir->i_sb->s_blocksize == OCFS2_MIN_BLOCKSIZE ||
+ (S_ISDIR(mode) && ocfs2_supports_inline_data(osb)) ||
(s_size + a_size) > OCFS2_XATTR_FREE_IN_IBODY) {
ret = ocfs2_reserve_new_metadata_blocks(osb, 1, xattr_ac);
if (ret) {
@@ -4791,19 +4795,33 @@
char *val,
int value_len)
{
- int offset;
+ int ret, offset, block_off;
struct ocfs2_xattr_value_root *xv;
struct ocfs2_xattr_entry *xe = xs->here;
+ struct ocfs2_xattr_header *xh = bucket_xh(xs->bucket);
+ void *base;
BUG_ON(!xs->base || !xe || ocfs2_xattr_is_local(xe));
- offset = le16_to_cpu(xe->xe_name_offset) +
- OCFS2_XATTR_SIZE(xe->xe_name_len);
+ ret = ocfs2_xattr_bucket_get_name_value(inode, xh,
+ xe - xh->xh_entries,
+ &block_off,
+ &offset);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
- xv = (struct ocfs2_xattr_value_root *)(xs->base + offset);
+ base = bucket_block(xs->bucket, block_off);
+ xv = (struct ocfs2_xattr_value_root *)(base + offset +
+ OCFS2_XATTR_SIZE(xe->xe_name_len));
- return __ocfs2_xattr_set_value_outside(inode, handle,
- xv, val, value_len);
+ ret = __ocfs2_xattr_set_value_outside(inode, handle,
+ xv, val, value_len);
+ if (ret)
+ mlog_errno(ret);
+out:
+ return ret;
}
static int ocfs2_rm_xattr_cluster(struct inode *inode,
diff --git a/fs/pipe.c b/fs/pipe.c
index 3a48ba5..14f502b 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -699,12 +699,12 @@
int retval;
mutex_lock(&inode->i_mutex);
-
retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
-
- if (retval >= 0)
+ if (retval >= 0) {
retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
-
+ if (retval < 0) /* this can happen only if on == T */
+ fasync_helper(-1, filp, 0, &pipe->fasync_readers);
+ }
mutex_unlock(&inode->i_mutex);
if (retval < 0)
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 0c9de19..beaa0ce 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -3066,7 +3066,6 @@
int retval = -ENOENT;
ino_t ino;
int tid;
- unsigned long pos = filp->f_pos; /* avoiding "long long" filp->f_pos */
struct pid_namespace *ns;
task = get_proc_task(inode);
@@ -3083,18 +3082,18 @@
goto out_no_task;
retval = 0;
- switch (pos) {
+ switch ((unsigned long)filp->f_pos) {
case 0:
ino = inode->i_ino;
- if (filldir(dirent, ".", 1, pos, ino, DT_DIR) < 0)
+ if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) < 0)
goto out;
- pos++;
+ filp->f_pos++;
/* fall through */
case 1:
ino = parent_ino(dentry);
- if (filldir(dirent, "..", 2, pos, ino, DT_DIR) < 0)
+ if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) < 0)
goto out;
- pos++;
+ filp->f_pos++;
/* fall through */
}
@@ -3104,9 +3103,9 @@
ns = filp->f_dentry->d_sb->s_fs_info;
tid = (int)filp->f_version;
filp->f_version = 0;
- for (task = first_tid(leader, tid, pos - 2, ns);
+ for (task = first_tid(leader, tid, filp->f_pos - 2, ns);
task;
- task = next_tid(task), pos++) {
+ task = next_tid(task), filp->f_pos++) {
tid = task_pid_nr_ns(task, ns);
if (proc_task_fill_cache(filp, dirent, filldir, task, tid) < 0) {
/* returning this tgid failed, save it as the first
@@ -3117,7 +3116,6 @@
}
}
out:
- filp->f_pos = pos;
put_task_struct(leader);
out_no_task:
return retval;
diff --git a/fs/proc/page.c b/fs/proc/page.c
index 2d13451..e998383 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -80,7 +80,7 @@
#define KPF_RECLAIM 9
#define KPF_BUDDY 10
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
static ssize_t kpageflags_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index b9b567a..5d7c7ec 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -114,6 +114,9 @@
if (!pagevec_add(&lru_pvec, page))
__pagevec_lru_add_file(&lru_pvec);
+ /* prevent the page from being discarded on memory pressure */
+ SetPageDirty(page);
+
unlock_page(page);
}
@@ -126,6 +129,7 @@
return -EFBIG;
add_error:
+ pagevec_lru_add_file(&lru_pvec);
page_cache_release(pages + loop);
for (loop++; loop < npages; loop++)
__free_page(pages + loop);
diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c
index c837dfc..2a79603 100644
--- a/fs/squashfs/block.c
+++ b/fs/squashfs/block.c
@@ -80,7 +80,7 @@
* generated a larger block - this does occasionally happen with zlib).
*/
int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
- int length, u64 *next_index, int srclength)
+ int length, u64 *next_index, int srclength, int pages)
{
struct squashfs_sb_info *msblk = sb->s_fs_info;
struct buffer_head **bh;
@@ -184,7 +184,7 @@
offset = 0;
}
- if (msblk->stream.avail_out == 0) {
+ if (msblk->stream.avail_out == 0 && page < pages) {
msblk->stream.next_out = buffer[page++];
msblk->stream.avail_out = PAGE_CACHE_SIZE;
}
@@ -201,25 +201,20 @@
zlib_init = 1;
}
- zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH);
+ zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
if (msblk->stream.avail_in == 0 && k < b)
put_bh(bh[k++]);
} while (zlib_err == Z_OK);
if (zlib_err != Z_STREAM_END) {
- ERROR("zlib_inflate returned unexpected result"
- " 0x%x, srclength %d, avail_in %d,"
- " avail_out %d\n", zlib_err, srclength,
- msblk->stream.avail_in,
- msblk->stream.avail_out);
+ ERROR("zlib_inflate error, data probably corrupt\n");
goto release_mutex;
}
zlib_err = zlib_inflateEnd(&msblk->stream);
if (zlib_err != Z_OK) {
- ERROR("zlib_inflateEnd returned unexpected result 0x%x,"
- " srclength %d\n", zlib_err, srclength);
+ ERROR("zlib_inflate error, data probably corrupt\n");
goto release_mutex;
}
length = msblk->stream.total_out;
@@ -268,7 +263,8 @@
put_bh(bh[k]);
read_failure:
- ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+ ERROR("squashfs_read_data failed to read block 0x%llx\n",
+ (unsigned long long) index);
kfree(bh);
return -EIO;
}
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index f29eda1..1c4739e 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -119,7 +119,7 @@
entry->length = squashfs_read_data(sb, entry->data,
block, length, &entry->next_index,
- cache->block_size);
+ cache->block_size, cache->pages);
spin_lock(&cache->lock);
@@ -406,7 +406,7 @@
for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
data[i] = buffer;
res = squashfs_read_data(sb, data, block, length |
- SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+ SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
kfree(data);
return res;
}
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 7a63398..9101dbd 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -133,7 +133,8 @@
type = le16_to_cpu(sqshb_ino->inode_type);
switch (type) {
case SQUASHFS_REG_TYPE: {
- unsigned int frag_offset, frag_size, frag;
+ unsigned int frag_offset, frag;
+ int frag_size;
u64 frag_blk;
struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
@@ -175,7 +176,8 @@
break;
}
case SQUASHFS_LREG_TYPE: {
- unsigned int frag_offset, frag_size, frag;
+ unsigned int frag_offset, frag;
+ int frag_size;
u64 frag_blk;
struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h
index 6b2515d..0e9feb6 100644
--- a/fs/squashfs/squashfs.h
+++ b/fs/squashfs/squashfs.h
@@ -34,7 +34,7 @@
/* block.c */
extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
- int);
+ int, int);
/* cache.c */
extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 071df5b..681ec0d 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -389,7 +389,7 @@
return err;
}
- printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+ printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
"Phillip Lougher\n");
return 0;
diff --git a/fs/super.c b/fs/super.c
index 8349ed6..6ce5014 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -371,8 +371,10 @@
continue;
if (!grab_super(old))
goto retry;
- if (s)
+ if (s) {
+ up_write(&s->s_umount);
destroy_super(s);
+ }
return old;
}
}
@@ -387,6 +389,7 @@
err = set(s, data);
if (err) {
spin_unlock(&sb_lock);
+ up_write(&s->s_umount);
destroy_super(s);
return ERR_PTR(err);
}
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index e65212d..261a1c2 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -41,7 +41,7 @@
* Stefan Reinauer <stepan@home.culture.mipt.ru>
*
* Module usage counts added on 96/04/29 by
- * Gertjan van Wingerde <gertjan@cs.vu.nl>
+ * Gertjan van Wingerde <gwingerde@gmail.com>
*
* Clean swab support on 19970406 by
* Francois-Rene Rideau <fare@tunes.org>
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index cb329ed..aa1016b 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -34,6 +34,12 @@
#include <linux/backing-dev.h>
#include <linux/freezer.h>
+#include "xfs_sb.h"
+#include "xfs_inum.h"
+#include "xfs_ag.h"
+#include "xfs_dmapi.h"
+#include "xfs_mount.h"
+
static kmem_zone_t *xfs_buf_zone;
STATIC int xfsbufd(void *);
STATIC int xfsbufd_wakeup(int, gfp_t);
@@ -1435,10 +1441,12 @@
void
xfs_free_buftarg(
- xfs_buftarg_t *btp)
+ struct xfs_mount *mp,
+ struct xfs_buftarg *btp)
{
xfs_flush_buftarg(btp, 1);
- xfs_blkdev_issue_flush(btp);
+ if (mp->m_flags & XFS_MOUNT_BARRIER)
+ xfs_blkdev_issue_flush(btp);
xfs_free_bufhash(btp);
iput(btp->bt_mapping->host);
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 288ae7c..9b4d666 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -413,7 +413,7 @@
* Handling of buftargs.
*/
extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
-extern void xfs_free_buftarg(xfs_buftarg_t *);
+extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *);
extern void xfs_wait_buftarg(xfs_buftarg_t *);
extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index c71e226..32ae502 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -734,15 +734,15 @@
{
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
- xfs_free_buftarg(mp->m_logdev_targp);
+ xfs_free_buftarg(mp, mp->m_logdev_targp);
xfs_blkdev_put(logdev);
}
if (mp->m_rtdev_targp) {
struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
- xfs_free_buftarg(mp->m_rtdev_targp);
+ xfs_free_buftarg(mp, mp->m_rtdev_targp);
xfs_blkdev_put(rtdev);
}
- xfs_free_buftarg(mp->m_ddev_targp);
+ xfs_free_buftarg(mp, mp->m_ddev_targp);
}
/*
@@ -811,9 +811,9 @@
out_free_rtdev_targ:
if (mp->m_rtdev_targp)
- xfs_free_buftarg(mp->m_rtdev_targp);
+ xfs_free_buftarg(mp, mp->m_rtdev_targp);
out_free_ddev_targ:
- xfs_free_buftarg(mp->m_ddev_targp);
+ xfs_free_buftarg(mp, mp->m_ddev_targp);
out_close_rtdev:
if (rtdev)
xfs_blkdev_put(rtdev);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index e2fb621..478e587 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -246,9 +246,6 @@
goto out_destroy;
}
- if (lock_flags)
- xfs_ilock(ip, lock_flags);
-
/*
* Preload the radix tree so we can insert safely under the
* write spinlock. Note that we cannot sleep inside the preload
@@ -256,7 +253,16 @@
*/
if (radix_tree_preload(GFP_KERNEL)) {
error = EAGAIN;
- goto out_unlock;
+ goto out_destroy;
+ }
+
+ /*
+ * Because the inode hasn't been added to the radix-tree yet it can't
+ * be found by another thread, so we can do the non-sleeping lock here.
+ */
+ if (lock_flags) {
+ if (!xfs_ilock_nowait(ip, lock_flags))
+ BUG();
}
mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
@@ -284,7 +290,6 @@
out_preload_end:
write_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
-out_unlock:
if (lock_flags)
xfs_iunlock(ip, lock_flags);
out_destroy:
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index b1047de..61af610 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1455,10 +1455,19 @@
item = item->ri_prev;
if (item->ri_total == 0) { /* first region to be added */
- item->ri_total = in_f->ilf_size;
- ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM);
- item->ri_buf = kmem_zalloc((item->ri_total *
- sizeof(xfs_log_iovec_t)), KM_SLEEP);
+ if (in_f->ilf_size == 0 ||
+ in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) {
+ xlog_warn(
+ "XFS: bad number of regions (%d) in inode log format",
+ in_f->ilf_size);
+ ASSERT(0);
+ return XFS_ERROR(EIO);
+ }
+
+ item->ri_total = in_f->ilf_size;
+ item->ri_buf =
+ kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t),
+ KM_SLEEP);
}
ASSERT(item->ri_total > item->ri_cnt);
/* Description region is ri_buf[0] */
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index ff8d27a..a11cc9d 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -69,8 +69,8 @@
u8 hborder;
u8 vborder;
u8 unknown0:1;
- u8 vsync_positive:1;
u8 hsync_positive:1;
+ u8 vsync_positive:1;
u8 separate_sync:2;
u8 stereo:1;
u8 unknown6:1;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 08a86d5..9a061ac 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -89,6 +89,8 @@
ATA_ID_DLF = 128,
ATA_ID_CSFO = 129,
ATA_ID_CFA_POWER = 160,
+ ATA_ID_CFA_KEY_MGMT = 162,
+ ATA_ID_CFA_MODES = 163,
ATA_ID_ROT_SPEED = 217,
ATA_ID_PIO4 = (1 << 1),
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 1b16108..d8bd43b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -531,7 +531,7 @@
extern void bio_integrity_advance(struct bio *, unsigned int);
extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
extern int bioset_integrity_create(struct bio_set *, int);
extern void bioset_integrity_free(struct bio_set *);
extern void bio_integrity_init_slab(void);
@@ -542,7 +542,7 @@
#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c) (0)
+#define bio_integrity_clone(a, b, c,d ) (0)
#define bioset_integrity_free(a) do { } while (0)
#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 1b98725..4864a43 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -393,8 +393,10 @@
# define CAP_FULL_SET ((kernel_cap_t){{ ~0, ~0 }})
# define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }})
# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } })
-# define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
- CAP_FS_MASK_B1 } })
+# define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \
+ | CAP_TO_MASK(CAP_SYS_RESOURCE) \
+ | CAP_TO_MASK(CAP_MKNOD), \
+ CAP_FS_MASK_B1 } })
#endif /* _KERNEL_CAPABILITY_U32S != 2 */
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 1514d53..a3ed7cb 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -52,7 +52,15 @@
#define __deprecated __attribute__((deprecated))
#define __packed __attribute__((packed))
#define __weak __attribute__((weak))
-#define __naked __attribute__((naked))
+
+/*
+ * it doesn't make sense on ARM (currently the only user of __naked) to trace
+ * naked functions because then mcount is called without stack and frame pointer
+ * being set up and there is no chance to restore the lr register to the value
+ * before mcount was called.
+ */
+#define __naked __attribute__((naked)) notrace
+
#define __noreturn __attribute__((noreturn))
/*
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 384b38d..1610427 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -234,7 +234,6 @@
int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg);
int (*resume) (struct cpufreq_policy *policy);
struct freq_attr **attr;
- bool hide_interface;
};
/* flags */
diff --git a/include/linux/dca.h b/include/linux/dca.h
index b00a753..9c20c7e 100644
--- a/include/linux/dca.h
+++ b/include/linux/dca.h
@@ -1,3 +1,23 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
#ifndef DCA_H
#define DCA_H
/* DCA Provider API */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index f041384..1956c8d 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -97,7 +97,6 @@
/**
* struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @refcount: local_t used for open-coded "bigref" counting
* @memcpy_count: transaction counter
* @bytes_transferred: byte counter
*/
@@ -114,9 +113,6 @@
* @cookie: last cookie value returned to client
* @chan_id: channel ID for sysfs
* @dev: class device for sysfs
- * @refcount: kref, used in "bigref" slow-mode
- * @slow_ref: indicates that the DMA channel is free
- * @rcu: the DMA channel's RCU head
* @device_node: used to add this to the device chan list
* @local: per-cpu pointer to a struct dma_chan_percpu
* @client-count: how many clients are using this channel
@@ -213,8 +209,6 @@
* @global_node: list_head for global dma_device_list
* @cap_mask: one or more dma_capability flags
* @max_xor: maximum number of xor sources, 0 if no capability
- * @refcount: reference count
- * @done: IO completion struct
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @device_alloc_chan_resources: allocate resources and return the
@@ -227,6 +221,7 @@
* @device_prep_dma_interrupt: prepares an end of chain interrupt operation
* @device_prep_slave_sg: prepares a slave dma operation
* @device_terminate_all: terminate all pending operations
+ * @device_is_tx_complete: poll for transaction completion
* @device_issue_pending: push pending transactions to hardware
*/
struct dma_device {
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index c37e924..ed21bd3 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -511,7 +511,6 @@
unsigned short words69_70[2]; /* reserved words 69-70
* future command overlap and queuing
*/
- /* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
unsigned short words71_74[4]; /* reserved words 71-74
* for IDENTIFY PACKET DEVICE command
*/
diff --git a/include/linux/ide.h b/include/linux/ide.h
index fe235b6..25087ae 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -797,6 +797,7 @@
struct scatterlist *sg_table;
int sg_max_nents; /* Maximum number of entries in it */
int sg_nents; /* Current number of entries in it */
+ int orig_sg_nents;
int sg_dma_direction; /* dma transfer direction */
/* data phase of the active command (currently only valid for PIO/DMA) */
@@ -866,6 +867,7 @@
unsigned int n_ports;
struct device *dev[2];
unsigned int (*init_chipset)(struct pci_dev *);
+ irq_handler_t irq_handler;
unsigned long host_flags;
void *host_priv;
ide_hwif_t *cur_port; /* for hosts requiring serialization */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5d87bc0..dc18b87 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -275,7 +275,7 @@
* advised to wait only for the following duration before
* doing SRST.
*/
- ATA_TMOUT_PMP_SRST_WAIT = 1000,
+ ATA_TMOUT_PMP_SRST_WAIT = 5000,
/* ATA bus states */
BUS_UNKNOWN = 0,
@@ -530,6 +530,7 @@
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
+ unsigned int orig_n_elem;
int dma_dir;
@@ -750,7 +751,8 @@
acpi_handle acpi_handle;
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
- u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+ /* owned by EH */
+ u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
};
/* The following initializer overrides a method to NULL whether one of
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index aa6fe70..51855df 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -346,6 +346,7 @@
return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
}
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
const struct sockaddr *sap2)
{
@@ -353,6 +354,13 @@
const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2;
return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr);
}
+#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
+ const struct sockaddr *sap2)
+{
+ return 0;
+}
+#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
/*
* Compare two host addresses
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 92915e8..d84feb7 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -276,4 +276,7 @@
#endif
};
+/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
+#define mm_cpumask(mm) (&(mm)->cpu_vm_mask)
+
#endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ec54785..6593667 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1079,6 +1079,7 @@
extern int register_netdevice_notifier(struct notifier_block *nb);
extern int unregister_netdevice_notifier(struct notifier_block *nb);
extern int init_dummy_netdev(struct net_device *dev);
+extern void netdev_resync_ops(struct net_device *dev);
extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
extern struct net_device *dev_get_by_index(struct net *net, int ifindex);
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index a550b52..2e5f000 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -406,6 +406,8 @@
int mask;
struct posix_acl * acl_access;
struct posix_acl * acl_default;
+ size_t len;
+ unsigned int npages;
struct page ** pages;
};
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index 54487a9..43011b6 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -37,6 +37,9 @@
#define NFSACL_MAXPAGES ((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \
>> PAGE_SHIFT)
+#define NFS_ACL_MAX_ENTRIES_INLINE (5)
+#define NFS_ACL_INLINE_BUFSIZE ((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2)
+
static inline unsigned int
nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default)
{
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8c216e0..011db2f 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1419,6 +1419,9 @@
#endif
};
+/* Future-safe accessor for struct task_struct's cpus_allowed. */
+#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed)
+
/*
* Priority of a process goes from 0..MAX_PRIO-1, valid RT
* priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 1bcb357..e0417e4 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -212,7 +212,7 @@
#define SERIO_FUJITSU 0x35
#define SERIO_ZHENHUA 0x36
#define SERIO_INEXIO 0x37
-#define SERIO_TOUCHIT213 0x37
+#define SERIO_TOUCHIT213 0x38
#define SERIO_W8001 0x39
#endif
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 6fc13d9..ded434b 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -109,11 +109,6 @@
#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
-static inline int net_alive(struct net *net)
-{
- return net && atomic_read(&net->count);
-}
-
static inline struct net *get_net(struct net *net)
{
atomic_inc(&net->count);
@@ -145,11 +140,6 @@
}
#else
-static inline int net_alive(struct net *net)
-{
- return 1;
-}
-
static inline struct net *get_net(struct net *net)
{
return net;
@@ -234,6 +224,23 @@
void (*exit)(struct net *net);
};
+/*
+ * Use these carefully. If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * This is critically important. Most of the network code cleanup
+ * runs with the assumption that dev_remove_pack has been called so no
+ * new packets will arrive during and after the cleanup functions have
+ * been called. dev_remove_pack is not per namespace so instead the
+ * guarantee of no more packets arriving in a network namespace is
+ * provided by ensuring that all network devices and all sockets have
+ * left the network namespace before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup. So please don't get this wrong.
+ */
extern int register_pernet_subsys(struct pernet_operations *);
extern void unregister_pernet_subsys(struct pernet_operations *);
extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h
index c25068e..5a449b4 100644
--- a/include/net/netfilter/nf_conntrack_core.h
+++ b/include/net/netfilter/nf_conntrack_core.h
@@ -62,7 +62,8 @@
if (ct && ct != &nf_conntrack_untracked) {
if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
ret = __nf_conntrack_confirm(skb);
- nf_ct_deliver_cached_events(ct);
+ if (likely(ret == NF_ACCEPT))
+ nf_ct_deliver_cached_events(ct);
}
return ret;
}
diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h
index 57aaa8f..f271d9c 100644
--- a/include/scsi/fc/fc_fcoe.h
+++ b/include/scsi/fc/fc_fcoe.h
@@ -31,10 +31,6 @@
#define ETH_P_FCOE 0x8906 /* FCOE ether type */
#endif
-#ifndef ETH_P_8021Q
-#define ETH_P_8021Q 0x8100
-#endif
-
/*
* FC_FCOE_OUI hasn't been standardized yet. XXX TBD.
*/
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
index 3e4801d..1b7af3a 100644
--- a/include/scsi/fc/fc_fs.h
+++ b/include/scsi/fc/fc_fs.h
@@ -337,4 +337,9 @@
FC_RJT_VENDOR = 0xff, /* vendor specific reject */
};
+/* default timeout values */
+
+#define FC_DEF_E_D_TOV 2000UL
+#define FC_DEF_R_A_TOV 10000UL
+
#endif /* _FC_FS_H_ */
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 9f28763..a2e126b 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -68,9 +68,6 @@
/*
* FC HBA status
*/
-#define FC_PAUSE (1 << 1)
-#define FC_LINK_UP (1 << 0)
-
enum fc_lport_state {
LPORT_ST_NONE = 0,
LPORT_ST_FLOGI,
@@ -339,31 +336,17 @@
struct libfc_function_template {
- /**
- * Mandatory Fields
- *
- * These handlers must be implemented by the LLD.
- */
-
/*
* Interface to send a FC frame
+ *
+ * STATUS: REQUIRED
*/
int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
- /**
- * Optional Fields
- *
- * The LLD may choose to implement any of the following handlers.
- * If LLD doesn't specify hander and leaves its pointer NULL then
- * the default libfc function will be used for that handler.
- */
-
- /**
- * ELS/CT interfaces
- */
-
/*
- * elsct_send - sends ELS/CT frame
+ * Interface to send ELS/CT frames
+ *
+ * STATUS: OPTIONAL
*/
struct fc_seq *(*elsct_send)(struct fc_lport *lport,
struct fc_rport *rport,
@@ -373,9 +356,6 @@
struct fc_frame *fp,
void *arg),
void *arg, u32 timer_msec);
- /**
- * Exhance Manager interfaces
- */
/*
* Send the FC frame payload using a new exchange and sequence.
@@ -407,6 +387,8 @@
* timer_msec argument is specified. The timer is canceled when
* it fires or when the exchange is done. The exchange timeout handler
* is registered by EM layer.
+ *
+ * STATUS: OPTIONAL
*/
struct fc_seq *(*exch_seq_send)(struct fc_lport *lp,
struct fc_frame *fp,
@@ -418,14 +400,18 @@
void *arg, unsigned int timer_msec);
/*
- * send a frame using existing sequence and exchange.
+ * Send a frame using an existing sequence and exchange.
+ *
+ * STATUS: OPTIONAL
*/
int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp,
struct fc_frame *fp);
/*
- * Send ELS response using mainly infomation
- * in exchange and sequence in EM layer.
+ * Send an ELS response using infomation from a previous
+ * exchange and sequence.
+ *
+ * STATUS: OPTIONAL
*/
void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd,
struct fc_seq_els_data *els_data);
@@ -437,6 +423,8 @@
* A timer_msec can be specified for abort timeout, if non-zero
* timer_msec value is specified then exchange resp handler
* will be called with timeout error if no response to abort.
+ *
+ * STATUS: OPTIONAL
*/
int (*seq_exch_abort)(const struct fc_seq *req_sp,
unsigned int timer_msec);
@@ -444,6 +432,8 @@
/*
* Indicate that an exchange/sequence tuple is complete and the memory
* allocated for the related objects may be freed.
+ *
+ * STATUS: OPTIONAL
*/
void (*exch_done)(struct fc_seq *sp);
@@ -451,6 +441,8 @@
* Assigns a EM and a free XID for an new exchange and then
* allocates a new exchange and sequence pair.
* The fp can be used to determine free XID.
+ *
+ * STATUS: OPTIONAL
*/
struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp);
@@ -458,12 +450,16 @@
* Release previously assigned XID by exch_get API.
* The LLD may implement this if XID is assigned by LLD
* in exch_get().
+ *
+ * STATUS: OPTIONAL
*/
void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp,
u16 ex_id);
/*
* Start a new sequence on the same exchange/sequence tuple.
+ *
+ * STATUS: OPTIONAL
*/
struct fc_seq *(*seq_start_next)(struct fc_seq *sp);
@@ -471,26 +467,38 @@
* Reset an exchange manager, completing all sequences and exchanges.
* If s_id is non-zero, reset only exchanges originating from that FID.
* If d_id is non-zero, reset only exchanges sending to that FID.
+ *
+ * STATUS: OPTIONAL
*/
- void (*exch_mgr_reset)(struct fc_exch_mgr *,
+ void (*exch_mgr_reset)(struct fc_lport *,
u32 s_id, u32 d_id);
- void (*rport_flush_queue)(void);
- /**
- * Local Port interfaces
+ /*
+ * Flush the rport work queue. Generally used before shutdown.
+ *
+ * STATUS: OPTIONAL
*/
+ void (*rport_flush_queue)(void);
/*
- * Receive a frame to a local port.
+ * Receive a frame for a local port.
+ *
+ * STATUS: OPTIONAL
*/
void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp,
struct fc_frame *fp);
+ /*
+ * Reset the local port.
+ *
+ * STATUS: OPTIONAL
+ */
int (*lport_reset)(struct fc_lport *);
- /**
- * Remote Port interfaces
+ /*
+ * Create a remote port
*/
+ struct fc_rport *(*rport_create)(struct fc_disc_port *);
/*
* Initiates the RP state machine. It is called from the LP module.
@@ -500,26 +508,33 @@
* - PLOGI
* - PRLI
* - RTV
+ *
+ * STATUS: OPTIONAL
*/
int (*rport_login)(struct fc_rport *rport);
/*
* Logoff, and remove the rport from the transport if
* it had been added. This will send a LOGO to the target.
+ *
+ * STATUS: OPTIONAL
*/
int (*rport_logoff)(struct fc_rport *rport);
/*
* Recieve a request from a remote port.
+ *
+ * STATUS: OPTIONAL
*/
void (*rport_recv_req)(struct fc_seq *, struct fc_frame *,
struct fc_rport *);
- struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
-
- /**
- * FCP interfaces
+ /*
+ * lookup an rport by it's port ID.
+ *
+ * STATUS: OPTIONAL
*/
+ struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
/*
* Send a fcp cmd from fsp pkt.
@@ -527,30 +542,38 @@
*
* The resp handler is called when FCP_RSP received.
*
+ * STATUS: OPTIONAL
*/
int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
void (*resp)(struct fc_seq *, struct fc_frame *fp,
void *arg));
/*
- * Used at least durring linkdown and reset
+ * Cleanup the FCP layer, used durring link down and reset
+ *
+ * STATUS: OPTIONAL
*/
void (*fcp_cleanup)(struct fc_lport *lp);
/*
* Abort all I/O on a local port
+ *
+ * STATUS: OPTIONAL
*/
void (*fcp_abort_io)(struct fc_lport *lp);
- /**
- * Discovery interfaces
+ /*
+ * Receive a request for the discovery layer.
+ *
+ * STATUS: OPTIONAL
*/
-
void (*disc_recv_req)(struct fc_seq *,
struct fc_frame *, struct fc_lport *);
/*
* Start discovery for a local port.
+ *
+ * STATUS: OPTIONAL
*/
void (*disc_start)(void (*disc_callback)(struct fc_lport *,
enum fc_disc_event),
@@ -559,6 +582,8 @@
/*
* Stop discovery for a given lport. This will remove
* all discovered rports
+ *
+ * STATUS: OPTIONAL
*/
void (*disc_stop) (struct fc_lport *);
@@ -566,6 +591,8 @@
* Stop discovery for a given lport. This will block
* until all discovered rports are deleted from the
* FC transport class
+ *
+ * STATUS: OPTIONAL
*/
void (*disc_stop_final) (struct fc_lport *);
};
@@ -603,7 +630,8 @@
/* Operational Information */
struct libfc_function_template tt;
- u16 link_status;
+ u8 link_up;
+ u8 qfull;
enum fc_lport_state state;
unsigned long boot_time;
@@ -637,7 +665,7 @@
struct delayed_work disc_work;
};
-/**
+/*
* FC_LPORT HELPER FUNCTIONS
*****************************/
static inline void *lport_priv(const struct fc_lport *lp)
@@ -669,7 +697,7 @@
}
-/**
+/*
* LOCAL PORT LAYER
*****************************/
int fc_lport_init(struct fc_lport *lp);
@@ -704,12 +732,6 @@
void fc_linkdown(struct fc_lport *);
/*
- * Pause and unpause traffic.
- */
-void fc_pause(struct fc_lport *);
-void fc_unpause(struct fc_lport *);
-
-/*
* Configure the local port.
*/
int fc_lport_config(struct fc_lport *);
@@ -725,19 +747,19 @@
int fc_set_mfs(struct fc_lport *lp, u32 mfs);
-/**
+/*
* REMOTE PORT LAYER
*****************************/
int fc_rport_init(struct fc_lport *lp);
void fc_rport_terminate_io(struct fc_rport *rp);
-/**
+/*
* DISCOVERY LAYER
*****************************/
int fc_disc_init(struct fc_lport *lp);
-/**
+/*
* SCSI LAYER
*****************************/
/*
@@ -798,7 +820,7 @@
*/
void fc_fcp_destroy(struct fc_lport *);
-/**
+/*
* ELS/CT interface
*****************************/
/*
@@ -807,7 +829,7 @@
int fc_elsct_init(struct fc_lport *lp);
-/**
+/*
* EXCHANGE MANAGER LAYER
*****************************/
/*
@@ -916,7 +938,7 @@
* If s_id is non-zero, reset only exchanges originating from that FID.
* If d_id is non-zero, reset only exchanges sending to that FID.
*/
-void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id);
+void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
/*
* Functions for fc_functions_template
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 89fdbb9..941818f 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -46,6 +46,7 @@
struct net_device *phys_dev; /* device with ethtool_ops */
struct packet_type fcoe_packet_type;
struct sk_buff_head fcoe_pending_queue;
+ u8 fcoe_pending_queue_active;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
@@ -58,16 +59,10 @@
u8 address_mode;
};
-static inline struct fcoe_softc *fcoe_softc(
- const struct fc_lport *lp)
-{
- return (struct fcoe_softc *)lport_priv(lp);
-}
-
static inline struct net_device *fcoe_netdev(
const struct fc_lport *lp)
{
- return fcoe_softc(lp)->real_dev;
+ return ((struct fcoe_softc *)lport_priv(lp))->real_dev;
}
static inline struct fcoe_hdr *skb_fcoe_header(const struct sk_buff *skb)
diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h
new file mode 100644
index 0000000..a758534
--- /dev/null
+++ b/include/video/broadsheetfb.h
@@ -0,0 +1,59 @@
+/*
+ * broadsheetfb.h - definitions for the broadsheet framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_BROADSHEETFB_H_
+#define _LINUX_BROADSHEETFB_H_
+
+/* Broadsheet command defines */
+#define BS_CMD_INIT_SYS_RUN 0x06
+#define BS_CMD_INIT_DSPE_CFG 0x09
+#define BS_CMD_INIT_DSPE_TMG 0x0A
+#define BS_CMD_INIT_ROTMODE 0x0B
+#define BS_CMD_RD_REG 0x10
+#define BS_CMD_WR_REG 0x11
+#define BS_CMD_LD_IMG 0x20
+#define BS_CMD_LD_IMG_AREA 0x22
+#define BS_CMD_LD_IMG_END 0x23
+#define BS_CMD_WAIT_DSPE_TRG 0x28
+#define BS_CMD_WAIT_DSPE_FREND 0x29
+#define BS_CMD_RD_WFM_INFO 0x30
+#define BS_CMD_UPD_INIT 0x32
+#define BS_CMD_UPD_FULL 0x33
+#define BS_CMD_UPD_GDRV_CLR 0x37
+
+/* Broadsheet pin interface specific defines */
+#define BS_CS 0x01
+#define BS_DC 0x02
+#define BS_WR 0x03
+
+/* struct used by broadsheet. board specific stuff comes from *board */
+struct broadsheetfb_par {
+ struct fb_info *info;
+ struct broadsheet_board *board;
+ void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
+ u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
+ wait_queue_head_t waitq;
+};
+
+/* board specific routines */
+struct broadsheet_board {
+ struct module *owner;
+ int (*init)(struct broadsheetfb_par *);
+ int (*wait_for_rdy)(struct broadsheetfb_par *);
+ void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+ void (*set_hdb)(struct broadsheetfb_par *, u16);
+ u16 (*get_hdb)(struct broadsheetfb_par *);
+ void (*cleanup)(struct broadsheetfb_par *);
+ int (*get_panel_type)(void);
+ int (*setup_irq)(struct fb_info *);
+};
+
+#endif
diff --git a/init/Kconfig b/init/Kconfig
index f068071..6a5c5fe 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -675,6 +675,9 @@
config SYSCTL
bool
+config ANON_INODES
+ bool
+
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
@@ -780,18 +783,6 @@
This option allows to disable the internal PC-Speaker
support, saving some memory.
-config COMPAT_BRK
- bool "Disable heap randomization"
- default y
- help
- Randomizing heap placement makes heap exploits harder, but it
- also breaks ancient binaries (including anything libc5 based).
- This option changes the bootup default to heap randomization
- disabled, and can be overriden runtime by setting
- /proc/sys/kernel/randomize_va_space to 2.
-
- On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
config BASE_FULL
default y
bool "Enable full-sized data structures for core" if EMBEDDED
@@ -809,9 +800,6 @@
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
-config ANON_INODES
- bool
-
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
@@ -897,6 +885,18 @@
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
+config COMPAT_BRK
+ bool "Disable heap randomization"
+ default y
+ help
+ Randomizing heap placement makes heap exploits harder, but it
+ also breaks ancient binaries (including anything libc5 based).
+ This option changes the bootup default to heap randomization
+ disabled, and can be overriden runtime by setting
+ /proc/sys/kernel/randomize_va_space to 2.
+
+ On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
choice
prompt "Choose SLAB allocator"
default SLUB
diff --git a/kernel/fork.c b/kernel/fork.c
index a66fbde..4854c2c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1179,10 +1179,6 @@
#endif
clear_all_latency_tracing(p);
- /* Our parent execution domain becomes current domain
- These must match for thread signalling to apply */
- p->parent_exec_id = p->self_exec_id;
-
/* ok, now we should be set up.. */
p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
p->pdeath_signal = 0;
@@ -1220,10 +1216,13 @@
set_task_cpu(p, smp_processor_id());
/* CLONE_PARENT re-uses the old parent */
- if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+ if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
p->real_parent = current->real_parent;
- else
+ p->parent_exec_id = current->parent_exec_id;
+ } else {
p->real_parent = current;
+ p->parent_exec_id = current->self_exec_id;
+ }
spin_lock(¤t->sighand->siglock);
diff --git a/kernel/module.c b/kernel/module.c
index ba22484..1196f5d 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2015,14 +2015,6 @@
if (err < 0)
goto free_mod;
-#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
- mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
- mod->name);
- if (!mod->refptr) {
- err = -ENOMEM;
- goto free_mod;
- }
-#endif
if (pcpuindex) {
/* We have a special allocation for this section. */
percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
@@ -2030,7 +2022,7 @@
mod->name);
if (!percpu) {
err = -ENOMEM;
- goto free_percpu;
+ goto free_mod;
}
sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
mod->percpu = percpu;
@@ -2082,6 +2074,14 @@
/* Module has been moved. */
mod = (void *)sechdrs[modindex].sh_addr;
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+ mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
+ mod->name);
+ if (!mod->refptr) {
+ err = -ENOMEM;
+ goto free_init;
+ }
+#endif
/* Now we've moved module, initialize linked lists, etc. */
module_unload_init(mod);
@@ -2288,15 +2288,17 @@
ftrace_release(mod->module_core, mod->core_size);
free_unload:
module_unload_free(mod);
- module_free(mod, mod->module_init);
- free_core:
- module_free(mod, mod->module_core);
- free_percpu:
- if (percpu)
- percpu_modfree(percpu);
+ free_init:
#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
percpu_modfree(mod->refptr);
#endif
+ module_free(mod, mod->module_init);
+ free_core:
+ module_free(mod, mod->module_core);
+ /* mod will be freed with core. Don't access it beyond this line! */
+ free_percpu:
+ if (percpu)
+ percpu_modfree(percpu);
free_mod:
kfree(args);
free_hdr:
diff --git a/kernel/signal.c b/kernel/signal.c
index 2a74fe8..1c88144 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1575,7 +1575,15 @@
read_lock(&tasklist_lock);
if (may_ptrace_stop()) {
do_notify_parent_cldstop(current, CLD_TRAPPED);
+ /*
+ * Don't want to allow preemption here, because
+ * sys_ptrace() needs this task to be inactive.
+ *
+ * XXX: implement read_unlock_no_resched().
+ */
+ preempt_disable();
read_unlock(&tasklist_lock);
+ preempt_enable_no_resched();
schedule();
} else {
/*
diff --git a/kernel/softirq.c b/kernel/softirq.c
index bdbe9de..9041ea7 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -626,6 +626,7 @@
preempt_enable_no_resched();
cond_resched();
preempt_disable();
+ rcu_qsctr_inc((long)__bind_cpu);
}
preempt_enable();
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 43f891b..00d59d0 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -122,8 +122,10 @@
if (likely(tsk->mm)) {
cputime_t time, dtime;
struct timeval value;
+ unsigned long flags;
u64 delta;
+ local_irq_save(flags);
time = tsk->stime + tsk->utime;
dtime = cputime_sub(time, tsk->acct_timexpd);
jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
@@ -131,10 +133,12 @@
delta = delta * USEC_PER_SEC + value.tv_usec;
if (delta == 0)
- return;
+ goto out;
tsk->acct_timexpd = time;
tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+ out:
+ local_irq_restore(flags);
}
}
diff --git a/kernel/user.c b/kernel/user.c
index 6a9b696..fbb300e 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -286,14 +286,12 @@
/* work function to remove sysfs directory for a user and free up
* corresponding structures.
*/
-static void remove_user_sysfs_dir(struct work_struct *w)
+static void cleanup_user_struct(struct work_struct *w)
{
struct user_struct *up = container_of(w, struct user_struct, work);
unsigned long flags;
int remove_user = 0;
- if (up->user_ns != &init_user_ns)
- return;
/* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
* atomic.
*/
@@ -312,9 +310,11 @@
if (!remove_user)
goto done;
- kobject_uevent(&up->kobj, KOBJ_REMOVE);
- kobject_del(&up->kobj);
- kobject_put(&up->kobj);
+ if (up->user_ns == &init_user_ns) {
+ kobject_uevent(&up->kobj, KOBJ_REMOVE);
+ kobject_del(&up->kobj);
+ kobject_put(&up->kobj);
+ }
sched_destroy_user(up);
key_put(up->uid_keyring);
@@ -335,7 +335,7 @@
atomic_inc(&up->__count);
spin_unlock_irqrestore(&uidhash_lock, flags);
- INIT_WORK(&up->work, remove_user_sysfs_dir);
+ INIT_WORK(&up->work, cleanup_user_struct);
schedule_work(&up->work);
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1bcf9cd..c536b37 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -402,7 +402,7 @@
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
select KALLSYMS
select KALLSYMS_ALL
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 1338469..35a1f7f 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -948,15 +948,15 @@
*/
int bitmap_find_free_region(unsigned long *bitmap, int bits, int order)
{
- int pos; /* scans bitmap by regions of size order */
+ int pos, end; /* scans bitmap by regions of size order */
- for (pos = 0; pos < bits; pos += (1 << order))
- if (__reg_op(bitmap, pos, order, REG_OP_ISFREE))
- break;
- if (pos == bits)
- return -ENOMEM;
- __reg_op(bitmap, pos, order, REG_OP_ALLOC);
- return pos;
+ for (pos = 0 ; (end = pos + (1 << order)) <= bits; pos = end) {
+ if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE))
+ continue;
+ __reg_op(bitmap, pos, order, REG_OP_ALLOC);
+ return pos;
+ }
+ return -ENOMEM;
}
EXPORT_SYMBOL(bitmap_find_free_region);
diff --git a/lib/idr.c b/lib/idr.c
index c11c576..dab4bca 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -449,6 +449,7 @@
n = idp->layers * IDR_BITS;
p = idp->top;
+ rcu_assign_pointer(idp->top, NULL);
max = 1 << n;
id = 0;
@@ -467,7 +468,6 @@
p = *--paa;
}
}
- rcu_assign_pointer(idp->top, NULL);
idp->layers = 0;
}
EXPORT_SYMBOL(idr_remove_all);
diff --git a/mm/highmem.c b/mm/highmem.c
index b36b83b..9101980 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -67,6 +67,25 @@
static DECLARE_WAIT_QUEUE_HEAD(pkmap_map_wait);
+/*
+ * Most architectures have no use for kmap_high_get(), so let's abstract
+ * the disabling of IRQ out of the locking in that case to save on a
+ * potential useless overhead.
+ */
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+#define lock_kmap() spin_lock_irq(&kmap_lock)
+#define unlock_kmap() spin_unlock_irq(&kmap_lock)
+#define lock_kmap_any(flags) spin_lock_irqsave(&kmap_lock, flags)
+#define unlock_kmap_any(flags) spin_unlock_irqrestore(&kmap_lock, flags)
+#else
+#define lock_kmap() spin_lock(&kmap_lock)
+#define unlock_kmap() spin_unlock(&kmap_lock)
+#define lock_kmap_any(flags) \
+ do { spin_lock(&kmap_lock); (void)(flags); } while (0)
+#define unlock_kmap_any(flags) \
+ do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
+#endif
+
static void flush_all_zero_pkmaps(void)
{
int i;
@@ -113,9 +132,9 @@
*/
void kmap_flush_unused(void)
{
- spin_lock(&kmap_lock);
+ lock_kmap();
flush_all_zero_pkmaps();
- spin_unlock(&kmap_lock);
+ unlock_kmap();
}
static inline unsigned long map_new_virtual(struct page *page)
@@ -145,10 +164,10 @@
__set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&pkmap_map_wait, &wait);
- spin_unlock(&kmap_lock);
+ unlock_kmap();
schedule();
remove_wait_queue(&pkmap_map_wait, &wait);
- spin_lock(&kmap_lock);
+ lock_kmap();
/* Somebody else might have mapped it while we slept */
if (page_address(page))
@@ -184,29 +203,59 @@
* For highmem pages, we can't trust "virtual" until
* after we have the lock.
*/
- spin_lock(&kmap_lock);
+ lock_kmap();
vaddr = (unsigned long)page_address(page);
if (!vaddr)
vaddr = map_new_virtual(page);
pkmap_count[PKMAP_NR(vaddr)]++;
BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 2);
- spin_unlock(&kmap_lock);
+ unlock_kmap();
return (void*) vaddr;
}
EXPORT_SYMBOL(kmap_high);
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+/**
+ * kmap_high_get - pin a highmem page into memory
+ * @page: &struct page to pin
+ *
+ * Returns the page's current virtual memory address, or NULL if no mapping
+ * exists. When and only when a non null address is returned then a
+ * matching call to kunmap_high() is necessary.
+ *
+ * This can be called from any context.
+ */
+void *kmap_high_get(struct page *page)
+{
+ unsigned long vaddr, flags;
+
+ lock_kmap_any(flags);
+ vaddr = (unsigned long)page_address(page);
+ if (vaddr) {
+ BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 1);
+ pkmap_count[PKMAP_NR(vaddr)]++;
+ }
+ unlock_kmap_any(flags);
+ return (void*) vaddr;
+}
+#endif
+
/**
* kunmap_high - map a highmem page into memory
* @page: &struct page to unmap
+ *
+ * If ARCH_NEEDS_KMAP_HIGH_GET is not defined then this may be called
+ * only from user context.
*/
void kunmap_high(struct page *page)
{
unsigned long vaddr;
unsigned long nr;
+ unsigned long flags;
int need_wakeup;
- spin_lock(&kmap_lock);
+ lock_kmap_any(flags);
vaddr = (unsigned long)page_address(page);
BUG_ON(!vaddr);
nr = PKMAP_NR(vaddr);
@@ -232,7 +281,7 @@
*/
need_wakeup = waitqueue_active(&pkmap_map_wait);
}
- spin_unlock(&kmap_lock);
+ unlock_kmap_any(flags);
/* do wake-up, if needed, race-free outside of the spin lock */
if (need_wakeup)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 6177e3b..56ddf41 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1262,7 +1262,6 @@
* Move the pages to the [file or anon] inactive list.
*/
pagevec_init(&pvec, 1);
- pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
spin_lock_irq(&zone->lru_lock);
@@ -1274,6 +1273,7 @@
*/
reclaim_stat->recent_rotated[!!file] += pgmoved;
+ pgmoved = 0;
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
@@ -1469,7 +1469,7 @@
int file = is_file_lru(l);
int scan;
- scan = zone_page_state(zone, NR_LRU_BASE + l);
+ scan = zone_nr_pages(zone, sc, l);
if (priority) {
scan >>= priority;
scan = (scan * percent[file]) / 100;
diff --git a/net/802/tr.c b/net/802/tr.c
index 158150f..f47ae28 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -668,3 +668,5 @@
EXPORT_SYMBOL(tr_type_trans);
EXPORT_SYMBOL(alloc_trdev);
+
+MODULE_LICENSE("GPL");
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 4a19acd..1b34135 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -553,7 +553,7 @@
int err = 0;
if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
- err = ops->ndo_neigh_setup(dev, pa);
+ err = ops->ndo_neigh_setup(real_dev, pa);
return err;
}
@@ -639,6 +639,7 @@
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
dev->netdev_ops = &vlan_netdev_ops;
}
+ netdev_resync_ops(dev);
if (is_vlan_dev(real_dev))
subclass = 1;
diff --git a/net/core/dev.c b/net/core/dev.c
index 72b0d26f..e3fe5c7 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2267,12 +2267,6 @@
rcu_read_lock();
- /* Don't receive packets in an exiting network namespace */
- if (!net_alive(dev_net(skb->dev))) {
- kfree_skb(skb);
- goto out;
- }
-
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -2594,9 +2588,9 @@
local_irq_disable();
skb = __skb_dequeue(&queue->input_pkt_queue);
if (!skb) {
- __napi_complete(napi);
local_irq_enable();
- break;
+ napi_complete(napi);
+ goto out;
}
local_irq_enable();
@@ -2605,6 +2599,7 @@
napi_gro_flush(napi);
+out:
return work;
}
@@ -2677,7 +2672,7 @@
struct sk_buff *skb, *next;
list_del_init(&napi->dev_list);
- kfree(napi->skb);
+ kfree_skb(napi->skb);
for (skb = napi->gro_list; skb; skb = next) {
next = skb->next;
@@ -4288,6 +4283,39 @@
}
EXPORT_SYMBOL(netdev_fix_features);
+/* Some devices need to (re-)set their netdev_ops inside
+ * ->init() or similar. If that happens, we have to setup
+ * the compat pointers again.
+ */
+void netdev_resync_ops(struct net_device *dev)
+{
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+ const struct net_device_ops *ops = dev->netdev_ops;
+
+ dev->init = ops->ndo_init;
+ dev->uninit = ops->ndo_uninit;
+ dev->open = ops->ndo_open;
+ dev->change_rx_flags = ops->ndo_change_rx_flags;
+ dev->set_rx_mode = ops->ndo_set_rx_mode;
+ dev->set_multicast_list = ops->ndo_set_multicast_list;
+ dev->set_mac_address = ops->ndo_set_mac_address;
+ dev->validate_addr = ops->ndo_validate_addr;
+ dev->do_ioctl = ops->ndo_do_ioctl;
+ dev->set_config = ops->ndo_set_config;
+ dev->change_mtu = ops->ndo_change_mtu;
+ dev->neigh_setup = ops->ndo_neigh_setup;
+ dev->tx_timeout = ops->ndo_tx_timeout;
+ dev->get_stats = ops->ndo_get_stats;
+ dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+ dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+ dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = ops->ndo_poll_controller;
+#endif
+#endif
+}
+EXPORT_SYMBOL(netdev_resync_ops);
+
/**
* register_netdevice - register a network device
* @dev: device to register
@@ -4332,27 +4360,7 @@
* This is temporary until all network devices are converted.
*/
if (dev->netdev_ops) {
- const struct net_device_ops *ops = dev->netdev_ops;
-
- dev->init = ops->ndo_init;
- dev->uninit = ops->ndo_uninit;
- dev->open = ops->ndo_open;
- dev->change_rx_flags = ops->ndo_change_rx_flags;
- dev->set_rx_mode = ops->ndo_set_rx_mode;
- dev->set_multicast_list = ops->ndo_set_multicast_list;
- dev->set_mac_address = ops->ndo_set_mac_address;
- dev->validate_addr = ops->ndo_validate_addr;
- dev->do_ioctl = ops->ndo_do_ioctl;
- dev->set_config = ops->ndo_set_config;
- dev->change_mtu = ops->ndo_change_mtu;
- dev->tx_timeout = ops->ndo_tx_timeout;
- dev->get_stats = ops->ndo_get_stats;
- dev->vlan_rx_register = ops->ndo_vlan_rx_register;
- dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
- dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ops->ndo_poll_controller;
-#endif
+ netdev_resync_ops(dev);
} else {
char drivername[64];
pr_info("%s (%s): not using net_device_ops yet\n",
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 6ac29a4..484f587 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -77,7 +77,9 @@
if (endp == buf)
goto err;
- rtnl_lock();
+ if (!rtnl_trylock())
+ return -ERESTARTSYS;
+
if (dev_isalive(net)) {
if ((ret = (*set)(net, new)) == 0)
ret = len;
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 2adb1a7..e3bebd3 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -157,9 +157,6 @@
struct pernet_operations *ops;
struct net *net;
- /* Be very certain incoming network packets will not find us */
- rcu_barrier();
-
net = container_of(work, struct net, work);
mutex_lock(&net_mutex);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 705b33b..fc562d2 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -1205,7 +1205,7 @@
int __init icmp_init(void)
{
- return register_pernet_device(&icmp_sk_ops);
+ return register_pernet_subsys(&icmp_sk_ops);
}
EXPORT_SYMBOL(icmp_err_convert);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 6659ac0..7985346 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -463,6 +463,7 @@
static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
struct net_device *dev)
{
+ struct net *net = container_of(qp->q.net, struct net, ipv4.frags);
struct iphdr *iph;
struct sk_buff *fp, *head = qp->q.fragments;
int len;
@@ -548,7 +549,7 @@
iph = ip_hdr(head);
iph->frag_off = 0;
iph->tot_len = htons(len);
- IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_REASMOKS);
+ IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
qp->q.fragments = NULL;
return 0;
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 19d7b42..cf74c41 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2443,7 +2443,7 @@
void __init tcp_v4_init(void)
{
inet_hashinfo_init(&tcp_hashinfo);
- if (register_pernet_device(&tcp_sk_ops))
+ if (register_pernet_subsys(&tcp_sk_ops))
panic("Failed to create the TCP control socket.\n");
}
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f9afb45..1220e2c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -493,15 +493,17 @@
read_unlock(&dev_base_lock);
}
-static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
{
struct net *net;
net = (struct net *)table->extra2;
if (p == &net->ipv6.devconf_dflt->forwarding)
- return;
+ return 0;
- rtnl_lock();
+ if (!rtnl_trylock())
+ return -ERESTARTSYS;
+
if (p == &net->ipv6.devconf_all->forwarding) {
__s32 newf = net->ipv6.devconf_all->forwarding;
net->ipv6.devconf_dflt->forwarding = newf;
@@ -512,6 +514,7 @@
if (*p)
rt6_purge_dflt_routers(net);
+ return 1;
}
#endif
@@ -2608,9 +2611,6 @@
ASSERT_RTNL();
- if ((dev->flags & IFF_LOOPBACK) && how == 1)
- how = 0;
-
rt6_ifdown(net, dev);
neigh_ifdown(&nd_tbl, dev);
@@ -3983,7 +3983,7 @@
ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
if (write)
- addrconf_fixup_forwarding(ctl, valp, val);
+ ret = addrconf_fixup_forwarding(ctl, valp, val);
return ret;
}
@@ -4019,8 +4019,7 @@
}
*valp = new;
- addrconf_fixup_forwarding(table, valp, val);
- return 1;
+ return addrconf_fixup_forwarding(table, valp, val);
}
static struct addrconf_sysctl_table
@@ -4446,25 +4445,6 @@
EXPORT_SYMBOL(unregister_inet6addr_notifier);
-static void addrconf_net_exit(struct net *net)
-{
- struct net_device *dev;
-
- rtnl_lock();
- /* clean dev list */
- for_each_netdev(net, dev) {
- if (__in6_dev_get(dev) == NULL)
- continue;
- addrconf_ifdown(dev, 1);
- }
- addrconf_ifdown(net->loopback_dev, 2);
- rtnl_unlock();
-}
-
-static struct pernet_operations addrconf_net_ops = {
- .exit = addrconf_net_exit,
-};
-
/*
* Init / cleanup code
*/
@@ -4506,10 +4486,6 @@
if (err)
goto errlo;
- err = register_pernet_device(&addrconf_net_ops);
- if (err)
- return err;
-
register_netdevice_notifier(&ipv6_dev_notf);
addrconf_verify(0);
@@ -4539,15 +4515,22 @@
void addrconf_cleanup(void)
{
struct inet6_ifaddr *ifa;
+ struct net_device *dev;
int i;
unregister_netdevice_notifier(&ipv6_dev_notf);
- unregister_pernet_device(&addrconf_net_ops);
-
unregister_pernet_subsys(&addrconf_ops);
rtnl_lock();
+ /* clean dev list */
+ for_each_netdev(&init_net, dev) {
+ if (__in6_dev_get(dev) == NULL)
+ continue;
+ addrconf_ifdown(dev, 1);
+ }
+ addrconf_ifdown(init_net.loopback_dev, 2);
+
/*
* Check hash table.
*/
@@ -4568,6 +4551,4 @@
del_timer(&addr_chk_timer);
rtnl_unlock();
-
- unregister_pernet_subsys(&addrconf_net_ops);
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index c802bc1..9c8309e 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,6 +72,10 @@
static struct list_head inetsw6[SOCK_MAX];
static DEFINE_SPINLOCK(inetsw6_lock);
+static int disable_ipv6 = 0;
+module_param_named(disable, disable_ipv6, int, 0);
+MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+
static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
{
const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
@@ -991,10 +995,21 @@
{
struct sk_buff *dummy_skb;
struct list_head *r;
- int err;
+ int err = 0;
BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
+ /* Register the socket-side information for inet6_create. */
+ for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+ INIT_LIST_HEAD(r);
+
+ if (disable_ipv6) {
+ printk(KERN_INFO
+ "IPv6: Loaded, but administratively disabled, "
+ "reboot required to enable\n");
+ goto out;
+ }
+
err = proto_register(&tcpv6_prot, 1);
if (err)
goto out;
@@ -1012,10 +1027,6 @@
goto out_unregister_udplite_proto;
- /* Register the socket-side information for inet6_create. */
- for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
- INIT_LIST_HEAD(r);
-
/* We MUST register RAW sockets before we create the ICMP6,
* IGMP6, or NDISC control sockets.
*/
@@ -1181,6 +1192,9 @@
static void __exit inet6_exit(void)
{
+ if (disable_ipv6)
+ return;
+
/* First of all disallow new sockets creation. */
sock_unregister(PF_INET6);
/* Disallow any further netlink messages */
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index ed4d79a..058a5e4 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -528,14 +528,14 @@
if (!ipv6_ext_hdr(nexthdr)) {
return -1;
}
- if (len < (int)sizeof(struct ipv6_opt_hdr)) {
- pr_debug("too short\n");
- return -1;
- }
if (nexthdr == NEXTHDR_NONE) {
pr_debug("next header is none\n");
return -1;
}
+ if (len < (int)sizeof(struct ipv6_opt_hdr)) {
+ pr_debug("too short\n");
+ return -1;
+ }
if (skb_copy_bits(skb, start, &hdr, sizeof(hdr)))
BUG();
if (nexthdr == NEXTHDR_AUTH)
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 3c57511..e9ac7a1 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -452,6 +452,7 @@
static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
struct net_device *dev)
{
+ struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
struct sk_buff *fp, *head = fq->q.fragments;
int payload_len;
unsigned int nhoff;
@@ -551,8 +552,7 @@
head->csum);
rcu_read_lock();
- IP6_INC_STATS_BH(dev_net(dev),
- __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
+ IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
rcu_read_unlock();
fq->q.fragments = NULL;
return 1;
@@ -566,8 +566,7 @@
printk(KERN_DEBUG "ip6_frag_reasm: no memory for reassembly\n");
out_fail:
rcu_read_lock();
- IP6_INC_STATS_BH(dev_net(dev),
- __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
+ IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
rcu_read_unlock();
return -1;
}
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index d3467e5..5cee2bc 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -188,9 +188,9 @@
}
nt = netdev_priv(dev);
- ipip6_tunnel_init(dev);
nt->parms = *parms;
+ ipip6_tunnel_init(dev);
if (parms->i_flags & SIT_ISATAP)
dev->priv_flags |= IFF_ISATAP;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 94de503..37e3d5e 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -752,6 +752,8 @@
skb_copy_queue_mapping(frag, first);
frag->do_not_encrypt = first->do_not_encrypt;
+ frag->dev = first->dev;
+ frag->iif = first->iif;
pos += copylen;
left -= copylen;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 90ce9dd..f4935e3 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -726,7 +726,7 @@
NF_CT_ASSERT(skb->nfct);
ret = l4proto->packet(ct, skb, dataoff, ctinfo, pf, hooknum);
- if (ret < 0) {
+ if (ret <= 0) {
/* Invalid: inverse of the return code tells
* the netfilter core what to do */
pr_debug("nf_conntrack_in: Can't track with proto module\n");
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index cb78aa0..ed6d873 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1780,6 +1780,7 @@
goto out;
}
+ exp->class = 0;
exp->expectfn = NULL;
exp->flags = 0;
exp->master = ct;
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index a1edb9c..f3fd154 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -859,7 +859,7 @@
*/
if (nf_ct_kill(ct))
return -NF_REPEAT;
- return -NF_DROP;
+ return NF_DROP;
}
/* Fall through */
case TCP_CONNTRACK_IGNORE:
@@ -892,7 +892,7 @@
nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
"nf_ct_tcp: killing out of sync session ");
nf_ct_kill(ct);
- return -NF_DROP;
+ return NF_DROP;
}
ct->proto.tcp.last_index = index;
ct->proto.tcp.last_dir = dir;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 9eb895c..3ae3cb8 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1084,6 +1084,13 @@
return 0;
}
+/**
+ * netlink_set_err - report error to broadcast listeners
+ * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+ * @pid: the PID of a process that we want to skip (if any)
+ * @groups: the broadcast group that will notice the error
+ * @code: error code, must be negative (as usual in kernelspace)
+ */
void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
{
struct netlink_set_err_data info;
@@ -1093,7 +1100,8 @@
info.exclude_sk = ssk;
info.pid = pid;
info.group = group;
- info.code = code;
+ /* sk->sk_err wants a positive error value */
+ info.code = -code;
read_lock(&nl_table_lock);
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 5c72a11..f8f047b 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -183,13 +183,6 @@
if (R_tab == NULL)
goto failure;
- if (!est && (ret == ACT_P_CREATED ||
- !gen_estimator_active(&police->tcf_bstats,
- &police->tcf_rate_est))) {
- err = -EINVAL;
- goto failure;
- }
-
if (parm->peakrate.rate) {
P_tab = qdisc_get_rtab(&parm->peakrate,
tb[TCA_POLICE_PEAKRATE]);
@@ -205,6 +198,12 @@
&police->tcf_lock, est);
if (err)
goto failure_unlock;
+ } else if (tb[TCA_POLICE_AVRATE] &&
+ (ret == ACT_P_CREATED ||
+ !gen_estimator_active(&police->tcf_bstats,
+ &police->tcf_rate_est))) {
+ err = -EINVAL;
+ goto failure_unlock;
}
/* No failure allowed after this point */
diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index 4c8d9f4..905fda5 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -111,7 +111,8 @@
if (sctp_addip_enable) {
auth_chunks->chunks[0] = SCTP_CID_ASCONF;
auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
- auth_chunks->param_hdr.length += htons(2);
+ auth_chunks->param_hdr.length =
+ htons(sizeof(sctp_paramhdr_t) + 2);
}
}
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index b78e3be..c4986d0 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -717,15 +717,20 @@
static int sctp_ctl_sock_init(void)
{
int err;
- sa_family_t family;
+ sa_family_t family = PF_INET;
if (sctp_get_pf_specific(PF_INET6))
family = PF_INET6;
- else
- family = PF_INET;
err = inet_ctl_sock_create(&sctp_ctl_sock, family,
SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+
+ /* If IPv6 socket could not be created, try the IPv4 socket */
+ if (err < 0 && family == PF_INET6)
+ err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+ SOCK_SEQPACKET, IPPROTO_SCTP,
+ &init_net);
+
if (err < 0) {
printk(KERN_ERR
"SCTP: Failed to create the SCTP control socket.\n");
@@ -1322,9 +1327,8 @@
out:
return status;
err_v6_add_protocol:
- sctp_v6_del_protocol();
-err_add_protocol:
sctp_v4_del_protocol();
+err_add_protocol:
inet_ctl_sock_destroy(sctp_ctl_sock);
err_ctl_sock_init:
sctp_v6_protosw_exit();
@@ -1335,7 +1339,6 @@
sctp_v4_pf_exit();
sctp_v6_pf_exit();
sctp_sysctl_unregister();
- list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_port_hashtable,
get_order(sctp_port_hashsize *
sizeof(struct sctp_bind_hashbucket)));
@@ -1383,7 +1386,6 @@
sctp_v4_pf_exit();
sctp_sysctl_unregister();
- list_del(&sctp_af_inet.list);
free_pages((unsigned long)sctp_assoc_hashtable,
get_order(sctp_assoc_hashsize *
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index e1d6076..b5495ae 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -787,36 +787,48 @@
struct sctp_association *asoc,
struct sctp_chunk *chunk)
{
- struct sctp_operr_chunk *operr_chunk;
struct sctp_errhdr *err_hdr;
+ struct sctp_ulpevent *ev;
- operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
- err_hdr = &operr_chunk->err_hdr;
+ while (chunk->chunk_end > chunk->skb->data) {
+ err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
- switch (err_hdr->cause) {
- case SCTP_ERROR_UNKNOWN_CHUNK:
- {
- struct sctp_chunkhdr *unk_chunk_hdr;
+ ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+ GFP_ATOMIC);
+ if (!ev)
+ return;
- unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
- switch (unk_chunk_hdr->type) {
- /* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
- * ERROR chunk reporting that it did not recognized the ASCONF
- * chunk type, the sender of the ASCONF MUST NOT send any
- * further ASCONF chunks and MUST stop its T-4 timer.
- */
- case SCTP_CID_ASCONF:
- asoc->peer.asconf_capable = 0;
- sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+ sctp_ulpq_tail_event(&asoc->ulpq, ev);
+
+ switch (err_hdr->cause) {
+ case SCTP_ERROR_UNKNOWN_CHUNK:
+ {
+ sctp_chunkhdr_t *unk_chunk_hdr;
+
+ unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+ switch (unk_chunk_hdr->type) {
+ /* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+ * an ERROR chunk reporting that it did not recognized
+ * the ASCONF chunk type, the sender of the ASCONF MUST
+ * NOT send any further ASCONF chunks and MUST stop its
+ * T-4 timer.
+ */
+ case SCTP_CID_ASCONF:
+ if (asoc->peer.asconf_capable == 0)
+ break;
+
+ asoc->peer.asconf_capable = 0;
+ sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+ break;
+ default:
+ break;
+ }
break;
+ }
default:
break;
}
- break;
- }
- default:
- break;
}
}
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 3a0cd07..f88dfde 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3163,7 +3163,6 @@
sctp_cmd_seq_t *commands)
{
struct sctp_chunk *chunk = arg;
- struct sctp_ulpevent *ev;
if (!sctp_vtag_verify(chunk, asoc))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -3173,21 +3172,10 @@
return sctp_sf_violation_chunklen(ep, asoc, type, arg,
commands);
- while (chunk->chunk_end > chunk->skb->data) {
- ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
- GFP_ATOMIC);
- if (!ev)
- goto nomem;
+ sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+ SCTP_CHUNK(chunk));
- sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
- SCTP_ULPEVENT(ev));
- sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
- SCTP_CHUNK(chunk));
- }
return SCTP_DISPOSITION_CONSUME;
-
-nomem:
- return SCTP_DISPOSITION_NOMEM;
}
/*
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 385f427..ff50a05 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -293,11 +293,6 @@
rpc_clear_queued(task);
if (rpc_test_and_set_running(task))
return;
- /* We might have raced */
- if (RPC_IS_QUEUED(task)) {
- rpc_clear_running(task);
- return;
- }
if (RPC_IS_ASYNC(task)) {
int status;
@@ -607,7 +602,9 @@
*/
static void __rpc_execute(struct rpc_task *task)
{
- int status = 0;
+ struct rpc_wait_queue *queue;
+ int task_is_async = RPC_IS_ASYNC(task);
+ int status = 0;
dprintk("RPC: %5u __rpc_execute flags=0x%x\n",
task->tk_pid, task->tk_flags);
@@ -647,15 +644,25 @@
*/
if (!RPC_IS_QUEUED(task))
continue;
- rpc_clear_running(task);
- if (RPC_IS_ASYNC(task)) {
- /* Careful! we may have raced... */
- if (RPC_IS_QUEUED(task))
- return;
- if (rpc_test_and_set_running(task))
- return;
+ /*
+ * The queue->lock protects against races with
+ * rpc_make_runnable().
+ *
+ * Note that once we clear RPC_TASK_RUNNING on an asynchronous
+ * rpc_task, rpc_make_runnable() can assign it to a
+ * different workqueue. We therefore cannot assume that the
+ * rpc_task pointer may still be dereferenced.
+ */
+ queue = task->tk_waitqueue;
+ spin_lock_bh(&queue->lock);
+ if (!RPC_IS_QUEUED(task)) {
+ spin_unlock_bh(&queue->lock);
continue;
}
+ rpc_clear_running(task);
+ spin_unlock_bh(&queue->lock);
+ if (task_is_async)
+ return;
/* sync task: sleep here */
dprintk("RPC: %5u sync task going to sleep\n", task->tk_pid);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 29e401b..62098d1 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -663,7 +663,7 @@
xprt, (xprt_connected(xprt) ? "is" : "is not"));
if (!xprt_bound(xprt)) {
- task->tk_status = -EIO;
+ task->tk_status = -EAGAIN;
return;
}
if (!xprt_lock_write(xprt, task))
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 5cbb404..29c71e6 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -467,7 +467,7 @@
int err, sent = 0;
if (unlikely(!sock))
- return -ENOTCONN;
+ return -ENOTSOCK;
clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
if (base != 0) {
@@ -577,6 +577,8 @@
req->rq_svec->iov_base,
req->rq_svec->iov_len);
+ if (!xprt_bound(xprt))
+ return -ENOTCONN;
status = xs_sendpages(transport->sock,
xs_addr(xprt),
xprt->addrlen, xdr,
@@ -594,6 +596,10 @@
}
switch (status) {
+ case -ENOTSOCK:
+ status = -ENOTCONN;
+ /* Should we call xs_close() here? */
+ break;
case -EAGAIN:
xs_nospace(task);
break;
@@ -693,6 +699,10 @@
}
switch (status) {
+ case -ENOTSOCK:
+ status = -ENOTCONN;
+ /* Should we call xs_close() here? */
+ break;
case -EAGAIN:
xs_nospace(task);
break;
@@ -1523,7 +1533,7 @@
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
/* Start by resetting any existing state */
@@ -1564,7 +1574,7 @@
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
/* Start by resetting any existing state */
@@ -1648,6 +1658,9 @@
write_unlock_bh(&sk->sk_callback_lock);
}
+ if (!xprt_bound(xprt))
+ return -ENOTCONN;
+
/* Tell the socket layer to start connecting... */
xprt->stat.connect_count++;
xprt->stat.connect_start = jiffies;
@@ -1668,7 +1681,7 @@
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
if (!sock) {
@@ -1728,7 +1741,7 @@
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
if (!sock) {
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index e28e2b8..092ae6f 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -102,3 +102,13 @@
config LIB80211_CRYPT_TKIP
tristate
+
+config LIB80211_DEBUG
+ bool "lib80211 debugging messages"
+ depends on LIB80211
+ default n
+ ---help---
+ You can enable this if you want verbose debugging messages
+ from lib80211.
+
+ If unsure, say N.
diff --git a/net/wireless/lib80211_crypt_ccmp.c b/net/wireless/lib80211_crypt_ccmp.c
index db42819..2301dc1 100644
--- a/net/wireless/lib80211_crypt_ccmp.c
+++ b/net/wireless/lib80211_crypt_ccmp.c
@@ -337,6 +337,7 @@
pos += 8;
if (ccmp_replay_check(pn, key->rx_pn)) {
+#ifdef CONFIG_LIB80211_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "CCMP: replay detected: STA=%pM "
"previous PN %02x%02x%02x%02x%02x%02x "
@@ -346,6 +347,7 @@
key->rx_pn[3], key->rx_pn[4], key->rx_pn[5],
pn[0], pn[1], pn[2], pn[3], pn[4], pn[5]);
}
+#endif
key->dot11RSNAStatsCCMPReplays++;
return -4;
}
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index 7e8e22b..c362873 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -465,12 +465,14 @@
pos += 8;
if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
+#ifdef CONFIG_LIB80211_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
" previous TSC %08x%04x received TSC "
"%08x%04x\n", hdr->addr2,
tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
}
+#endif
tkey->dot11RSNAStatsTKIPReplays++;
return -4;
}
@@ -505,10 +507,12 @@
* it needs to be recalculated for the next packet. */
tkey->rx_phase1_done = 0;
}
+#ifdef CONFIG_LIB80211_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "TKIP: ICV error detected: STA="
"%pM\n", hdr->addr2);
}
+#endif
tkey->dot11RSNAStatsTKIPICVErrors++;
return -5;
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1e728ff..31b807a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1908,6 +1908,11 @@
if (err)
return err;
+ if (!drv->ops->get_mesh_params) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
/* Get the mesh params */
rtnl_lock();
err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
@@ -2017,6 +2022,11 @@
if (err)
return err;
+ if (!drv->ops->set_mesh_params) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
/* This makes sure that there aren't more than 32 mesh config
* parameters (otherwise our bitfield scheme would not work.) */
BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
@@ -2061,6 +2071,7 @@
err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
rtnl_unlock();
+ out:
/* cleanup */
cfg80211_put_dev(drv);
dev_put(dev);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 85c9034..bd0a16c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -380,7 +380,8 @@
freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
- if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+ if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+ freq_range->max_bandwidth_khz > freq_diff)
return false;
return true;
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index e25ff62..62a5425 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -748,12 +748,51 @@
schedule_work(&net->xfrm.state_hash_work);
}
+static void xfrm_state_look_at(struct xfrm_policy *pol, struct xfrm_state *x,
+ struct flowi *fl, unsigned short family,
+ xfrm_address_t *daddr, xfrm_address_t *saddr,
+ struct xfrm_state **best, int *acq_in_progress,
+ int *error)
+{
+ /* Resolution logic:
+ * 1. There is a valid state with matching selector. Done.
+ * 2. Valid state with inappropriate selector. Skip.
+ *
+ * Entering area of "sysdeps".
+ *
+ * 3. If state is not valid, selector is temporary, it selects
+ * only session which triggered previous resolution. Key
+ * manager will do something to install a state with proper
+ * selector.
+ */
+ if (x->km.state == XFRM_STATE_VALID) {
+ if ((x->sel.family &&
+ !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
+ !security_xfrm_state_pol_flow_match(x, pol, fl))
+ return;
+
+ if (!*best ||
+ (*best)->km.dying > x->km.dying ||
+ ((*best)->km.dying == x->km.dying &&
+ (*best)->curlft.add_time < x->curlft.add_time))
+ *best = x;
+ } else if (x->km.state == XFRM_STATE_ACQ) {
+ *acq_in_progress = 1;
+ } else if (x->km.state == XFRM_STATE_ERROR ||
+ x->km.state == XFRM_STATE_EXPIRED) {
+ if (xfrm_selector_match(&x->sel, fl, x->sel.family) &&
+ security_xfrm_state_pol_flow_match(x, pol, fl))
+ *error = -ESRCH;
+ }
+}
+
struct xfrm_state *
xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
struct flowi *fl, struct xfrm_tmpl *tmpl,
struct xfrm_policy *pol, int *err,
unsigned short family)
{
+ static xfrm_address_t saddr_wildcard = { };
struct net *net = xp_net(pol);
unsigned int h;
struct hlist_node *entry;
@@ -773,40 +812,27 @@
xfrm_state_addr_check(x, daddr, saddr, family) &&
tmpl->mode == x->props.mode &&
tmpl->id.proto == x->id.proto &&
- (tmpl->id.spi == x->id.spi || !tmpl->id.spi)) {
- /* Resolution logic:
- 1. There is a valid state with matching selector.
- Done.
- 2. Valid state with inappropriate selector. Skip.
+ (tmpl->id.spi == x->id.spi || !tmpl->id.spi))
+ xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+ &best, &acquire_in_progress, &error);
+ }
+ if (best)
+ goto found;
- Entering area of "sysdeps".
-
- 3. If state is not valid, selector is temporary,
- it selects only session which triggered
- previous resolution. Key manager will do
- something to install a state with proper
- selector.
- */
- if (x->km.state == XFRM_STATE_VALID) {
- if ((x->sel.family && !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
- !security_xfrm_state_pol_flow_match(x, pol, fl))
- continue;
- if (!best ||
- best->km.dying > x->km.dying ||
- (best->km.dying == x->km.dying &&
- best->curlft.add_time < x->curlft.add_time))
- best = x;
- } else if (x->km.state == XFRM_STATE_ACQ) {
- acquire_in_progress = 1;
- } else if (x->km.state == XFRM_STATE_ERROR ||
- x->km.state == XFRM_STATE_EXPIRED) {
- if (xfrm_selector_match(&x->sel, fl, x->sel.family) &&
- security_xfrm_state_pol_flow_match(x, pol, fl))
- error = -ESRCH;
- }
- }
+ h = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
+ hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) {
+ if (x->props.family == family &&
+ x->props.reqid == tmpl->reqid &&
+ !(x->props.flags & XFRM_STATE_WILDRECV) &&
+ xfrm_state_addr_check(x, daddr, saddr, family) &&
+ tmpl->mode == x->props.mode &&
+ tmpl->id.proto == x->id.proto &&
+ (tmpl->id.spi == x->id.spi || !tmpl->id.spi))
+ xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+ &best, &acquire_in_progress, &error);
}
+found:
x = best;
if (!x && !error && !acquire_in_progress) {
if (tmpl->id.spi &&
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 3e1057f..d190092 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -11,6 +11,7 @@
#include <time.h>
#include <unistd.h>
#include <sys/stat.h>
+#include <sys/time.h>
#define LKC_DIRECT_LINK
#include "lkc.h"
@@ -464,9 +465,22 @@
input_mode = set_yes;
break;
case 'r':
+ {
+ struct timeval now;
+ unsigned int seed;
+
+ /*
+ * Use microseconds derived seed,
+ * compensate for systems where it may be zero
+ */
+ gettimeofday(&now, NULL);
+
+ seed = (unsigned int)((now.tv_sec + 1) * (now.tv_usec + 1));
+ srand(seed);
+
input_mode = set_random;
- srand(time(NULL));
break;
+ }
case 'h':
printf(_("See README for usage info\n"));
exit(0);
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index 830d9ea..273d738 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -843,7 +843,7 @@
default:
continue;
}
- if (!sym_is_choice(sym) || mode != def_random)
+ if (!(sym_is_choice(sym) && mode == def_random))
sym->flags |= SYMBOL_DEF_USER;
break;
default:
@@ -856,28 +856,49 @@
if (mode != def_random)
return;
-
+ /*
+ * We have different type of choice blocks.
+ * If curr.tri equal to mod then we can select several
+ * choice symbols in one block.
+ * In this case we do nothing.
+ * If curr.tri equal yes then only one symbol can be
+ * selected in a choice block and we set it to yes,
+ * and the rest to no.
+ */
for_all_symbols(i, csym) {
if (sym_has_value(csym) || !sym_is_choice(csym))
continue;
sym_calc_value(csym);
+
+ if (csym->curr.tri != yes)
+ continue;
+
prop = sym_get_choice_prop(csym);
- def = -1;
- while (1) {
- cnt = 0;
- expr_list_for_each_sym(prop->expr, e, sym) {
- if (sym->visible == no)
- continue;
- if (def == cnt++) {
- csym->def[S_DEF_USER].val = sym;
- break;
- }
+
+ /* count entries in choice block */
+ cnt = 0;
+ expr_list_for_each_sym(prop->expr, e, sym)
+ cnt++;
+
+ /*
+ * find a random value and set it to yes,
+ * set the rest to no so we have only one set
+ */
+ def = (rand() % cnt);
+
+ cnt = 0;
+ expr_list_for_each_sym(prop->expr, e, sym) {
+ if (def == cnt++) {
+ sym->def[S_DEF_USER].tri = yes;
+ csym->def[S_DEF_USER].val = sym;
}
- if (def >= 0 || cnt < 2)
- break;
- def = (rand() % cnt) + 1;
+ else {
+ sym->def[S_DEF_USER].tri = no;
+ }
}
csym->flags |= SYMBOL_DEF_USER;
+ /* clear VALID to get value calculated */
+ csym->flags &= ~(SYMBOL_VALID);
}
}
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 8c6b7b0..fa4a0a1 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -35,9 +35,10 @@
rpm-pkg rpm: $(objtree)/kernel.spec FORCE
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
+ $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
$(PREV) rm $(KERNELPATH)
-
+ rm -f $(objtree)/.scmversion
set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
set -e; \
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index ee448cd..3d93f8c 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -96,7 +96,7 @@
echo ""
echo "%clean"
-echo '#echo -rf $RPM_BUILD_ROOT'
+echo 'rm -rf $RPM_BUILD_ROOT'
echo ""
echo "%files"
echo '%defattr (-, root, root)'
diff --git a/scripts/unifdef.c b/scripts/unifdef.c
index 552025e..05a31a6 100644
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -206,7 +206,7 @@
static void error(const char *);
static int findsym(const char *);
static void flushline(bool);
-static Linetype getline(void);
+static Linetype get_line(void);
static Linetype ifeval(const char **);
static void ignoreoff(void);
static void ignoreon(void);
@@ -512,7 +512,7 @@
for (;;) {
linenum++;
- lineval = getline();
+ lineval = get_line();
trans_table[ifstate[depth]][lineval]();
debug("process %s -> %s depth %d",
linetype_name[lineval],
@@ -526,7 +526,7 @@
* help from skipcomment().
*/
static Linetype
-getline(void)
+get_line(void)
{
const char *cp;
int cursym;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0278bc0..e7ded13 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1498,58 +1498,31 @@
* looks for host based access restrictions
*
* This version will only be appropriate for really small
- * sets of single label hosts. Because of the masking
- * it cannot shortcut out on the first match. There are
- * numerious ways to address the problem, but none of them
- * have been applied here.
+ * sets of single label hosts.
*
* Returns the label of the far end or NULL if it's not special.
*/
static char *smack_host_label(struct sockaddr_in *sip)
{
struct smk_netlbladdr *snp;
- char *bestlabel = NULL;
struct in_addr *siap = &sip->sin_addr;
- struct in_addr *liap;
- struct in_addr *miap;
- struct in_addr bestmask;
if (siap->s_addr == 0)
return NULL;
- bestmask.s_addr = 0;
-
for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
- liap = &snp->smk_host.sin_addr;
- miap = &snp->smk_mask;
/*
- * If the addresses match after applying the list entry mask
- * the entry matches the address. If it doesn't move along to
- * the next entry.
+ * we break after finding the first match because
+ * the list is sorted from longest to shortest mask
+ * so we have found the most specific match
*/
- if ((liap->s_addr & miap->s_addr) !=
- (siap->s_addr & miap->s_addr))
- continue;
- /*
- * If the list entry mask identifies a single address
- * it can't get any more specific.
- */
- if (miap->s_addr == 0xffffffff)
+ if ((&snp->smk_host.sin_addr)->s_addr ==
+ (siap->s_addr & (&snp->smk_mask)->s_addr)) {
return snp->smk_label;
- /*
- * If the list entry mask is less specific than the best
- * already found this entry is uninteresting.
- */
- if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
- continue;
- /*
- * This is better than any entry found so far.
- */
- bestmask.s_addr = miap->s_addr;
- bestlabel = snp->smk_label;
+ }
}
- return bestlabel;
+ return NULL;
}
/**
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 8e42800..51f0efc 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -650,10 +650,6 @@
return skp;
}
-/*
-#define BEMASK 0x80000000
-*/
-#define BEMASK 0x00000001
#define BEBITS (sizeof(__be32) * 8)
/*
@@ -663,12 +659,10 @@
{
struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
- __be32 bebits;
- int maskn = 0;
+ int maskn;
+ u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
- for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
- if ((skp->smk_mask.s_addr & bebits) == 0)
- break;
+ for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
seq_printf(s, "%u.%u.%u.%u/%d %s\n",
hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
@@ -702,6 +696,42 @@
}
/**
+ * smk_netlbladdr_insert
+ * @new : netlabel to insert
+ *
+ * This helper insert netlabel in the smack_netlbladdrs list
+ * sorted by netmask length (longest to smallest)
+ */
+static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+{
+ struct smk_netlbladdr *m;
+
+ if (smack_netlbladdrs == NULL) {
+ smack_netlbladdrs = new;
+ return;
+ }
+
+ /* the comparison '>' is a bit hacky, but works */
+ if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+ new->smk_next = smack_netlbladdrs;
+ smack_netlbladdrs = new;
+ return;
+ }
+ for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+ if (m->smk_next == NULL) {
+ m->smk_next = new;
+ return;
+ }
+ if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+ new->smk_next = m->smk_next;
+ m->smk_next = new;
+ return;
+ }
+ }
+}
+
+
+/**
* smk_write_netlbladdr - write() for /smack/netlabel
* @filp: file pointer, not actually used
* @buf: where to get the data from
@@ -724,8 +754,9 @@
struct netlbl_audit audit_info;
struct in_addr mask;
unsigned int m;
- __be32 bebits = BEMASK;
+ u32 mask_bits = (1<<31);
__be32 nsa;
+ u32 temp_mask;
/*
* Must have privilege.
@@ -761,10 +792,13 @@
if (sp == NULL)
return -EINVAL;
- for (mask.s_addr = 0; m > 0; m--) {
- mask.s_addr |= bebits;
- bebits <<= 1;
+ for (temp_mask = 0; m > 0; m--) {
+ temp_mask |= mask_bits;
+ mask_bits >>= 1;
}
+ mask.s_addr = cpu_to_be32(temp_mask);
+
+ newname.sin_addr.s_addr &= mask.s_addr;
/*
* Only allow one writer at a time. Writes should be
* quite rare and small in any case.
@@ -772,6 +806,7 @@
mutex_lock(&smk_netlbladdr_lock);
nsa = newname.sin_addr.s_addr;
+ /* try to find if the prefix is already in the list */
for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
if (skp->smk_host.sin_addr.s_addr == nsa &&
skp->smk_mask.s_addr == mask.s_addr)
@@ -787,9 +822,8 @@
rc = 0;
skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
skp->smk_mask.s_addr = mask.s_addr;
- skp->smk_next = smack_netlbladdrs;
skp->smk_label = sp;
- smack_netlbladdrs = skp;
+ smk_netlbladdr_insert(skp);
}
} else {
rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 35afd0c..718d066 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -21,7 +21,6 @@
#include <sound/pxa2xx-lib.h>
#include <asm/irq.h>
-#include <mach/hardware.h>
#include <mach/regs-ac97.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 85cf591..ccec48f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -20,8 +20,6 @@
#include <sound/initval.h>
#include <sound/pxa2xx-lib.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
#include <mach/audio.h>
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 75a0d74..108b643 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -12,8 +12,7 @@
#include <sound/pcm_params.h>
#include <sound/pxa2xx-lib.h>
-#include <asm/dma.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include "pxa2xx-pcm.h"
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index 4690b8b..e570649 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -692,6 +692,9 @@
snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_PVOLUME], left, right);
if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME)
snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_CVOLUME], left, right);
+ } else if (slot->present & SNDRV_MIXER_OSS_PRESENT_CVOLUME) {
+ snd_mixer_oss_put_volume1_vol(fmixer, pslot,
+ slot->numid[SNDRV_MIXER_OSS_ITEM_CVOLUME], left, right);
} else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GVOLUME) {
snd_mixer_oss_put_volume1_vol(fmixer, pslot, slot->numid[SNDRV_MIXER_OSS_ITEM_GVOLUME], left, right);
} else if (slot->present & SNDRV_MIXER_OSS_PRESENT_GLOBAL) {
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 0a1798e..699d289 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2872,7 +2872,7 @@
setup = kmalloc(sizeof(*setup), GFP_KERNEL);
if (! setup) {
buffer->error = -ENOMEM;
- mutex_lock(&pstr->oss.setup_mutex);
+ mutex_unlock(&pstr->oss.setup_mutex);
return;
}
if (pstr->oss.setup_list == NULL)
@@ -2886,7 +2886,7 @@
if (! template.task_name) {
kfree(setup);
buffer->error = -ENOMEM;
- mutex_lock(&pstr->oss.setup_mutex);
+ mutex_unlock(&pstr->oss.setup_mutex);
return;
}
}
diff --git a/sound/core/sgbuf.c b/sound/core/sgbuf.c
index d4564ed..4e7ec2b 100644
--- a/sound/core/sgbuf.c
+++ b/sound/core/sgbuf.c
@@ -38,6 +38,10 @@
if (! sgbuf)
return -EINVAL;
+ if (dmab->area)
+ vunmap(dmab->area);
+ dmab->area = NULL;
+
tmpb.dev.type = SNDRV_DMA_TYPE_DEV;
tmpb.dev.dev = sgbuf->dev;
for (i = 0; i < sgbuf->pages; i++) {
@@ -48,9 +52,6 @@
tmpb.bytes = (sgbuf->table[i].addr & ~PAGE_MASK) << PAGE_SHIFT;
snd_dma_free_pages(&tmpb);
}
- if (dmab->area)
- vunmap(dmab->area);
- dmab->area = NULL;
kfree(sgbuf->table);
kfree(sgbuf->page_table);
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 58c972b..b848d10 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -550,21 +550,27 @@
#ifdef CONFIG_PM
static int snd_opl3sa2_suspend(struct snd_card *card, pm_message_t state)
{
- struct snd_opl3sa2 *chip = card->private_data;
+ if (card) {
+ struct snd_opl3sa2 *chip = card->private_data;
- snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
- chip->wss->suspend(chip->wss);
- /* power down */
- snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D3);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+ chip->wss->suspend(chip->wss);
+ /* power down */
+ snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D3);
+ }
return 0;
}
static int snd_opl3sa2_resume(struct snd_card *card)
{
- struct snd_opl3sa2 *chip = card->private_data;
+ struct snd_opl3sa2 *chip;
int i;
+ if (!card)
+ return 0;
+
+ chip = card->private_data;
/* power up */
snd_opl3sa2_write(chip, OPL3SA2_PM_CTRL, OPL3SA2_PM_D0);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 5e909e0..f3b5723 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2059,26 +2059,31 @@
{
const struct snd_pci_quirk *q;
- /* Check VIA HD Audio Controller exist */
- if (chip->pci->vendor == PCI_VENDOR_ID_VIA &&
- chip->pci->device == VIA_HDAC_DEVICE_ID) {
+ switch (fix) {
+ case POS_FIX_LPIB:
+ case POS_FIX_POSBUF:
+ return fix;
+ }
+
+ /* Check VIA/ATI HD Audio Controller exist */
+ switch (chip->driver_type) {
+ case AZX_DRIVER_VIA:
+ case AZX_DRIVER_ATI:
chip->via_dmapos_patch = 1;
/* Use link position directly, avoid any transfer problem. */
return POS_FIX_LPIB;
}
chip->via_dmapos_patch = 0;
- if (fix == POS_FIX_AUTO) {
- q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
- if (q) {
- printk(KERN_INFO
- "hda_intel: position_fix set to %d "
- "for device %04x:%04x\n",
- q->value, q->subvendor, q->subdevice);
- return q->value;
- }
+ q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
+ if (q) {
+ printk(KERN_INFO
+ "hda_intel: position_fix set to %d "
+ "for device %04x:%04x\n",
+ q->value, q->subvendor, q->subdevice);
+ return q->value;
}
- return fix;
+ return POS_FIX_AUTO;
}
/*
@@ -2210,9 +2215,17 @@
gcap = azx_readw(chip, GCAP);
snd_printdd("chipset global capabilities = 0x%x\n", gcap);
+ /* ATI chips seems buggy about 64bit DMA addresses */
+ if (chip->driver_type == AZX_DRIVER_ATI)
+ gcap &= ~0x01;
+
/* allow 64bit DMA address if supported by H/W */
if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+ else {
+ pci_set_dma_mask(pci, DMA_32BIT_MASK);
+ pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+ }
/* read number of streams from GCAP register instead of using
* hardcoded value
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 3bc4276..6094344 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1207,7 +1207,7 @@
"LFE Playback Volume",
"Side Playback Volume",
"Headphone Playback Volume",
- "Headphone Playback Volume",
+ "Headphone2 Playback Volume",
"Speaker Playback Volume",
"External Speaker Playback Volume",
"Speaker2 Playback Volume",
@@ -1221,7 +1221,7 @@
"LFE Playback Switch",
"Side Playback Switch",
"Headphone Playback Switch",
- "Headphone Playback Switch",
+ "Headphone2 Playback Switch",
"Speaker Playback Switch",
"External Speaker Playback Switch",
"Speaker2 Playback Switch",
@@ -3516,6 +3516,7 @@
if (! spec->autocfg.line_outs)
return 0; /* can't find valid pin config */
+#if 0 /* FIXME: temporarily disabled */
/* If we have no real line-out pin and multiple hp-outs, HPs should
* be set up as multi-channel outputs.
*/
@@ -3535,6 +3536,7 @@
spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
spec->autocfg.hp_outs = 0;
}
+#endif /* FIXME: temporarily disabled */
if (spec->autocfg.mono_out_pin) {
int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index f23a735..bb16250 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -607,6 +607,7 @@
/* set the format to the board */
err = mixart_set_format(stream, format);
if(err < 0) {
+ mutex_unlock(&mgr->setup_mutex);
return err;
}
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 1ba25a5..ec93066 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -25,8 +25,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/corgi.h>
#include <mach/audio.h>
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index 2e3386d..ac294c7 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -21,8 +21,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c
index fe4a729..949be9c 100644
--- a/sound/soc/pxa/em-x270.c
+++ b/sound/soc/pxa/em-x270.c
@@ -29,8 +29,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index 6e98271..cad2c4c 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -26,8 +26,6 @@
#include <asm/mach-types.h>
#include <asm/hardware/locomo.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/poodle.h>
#include <mach/audio.h>
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 73cb6b4..1dfdf66 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -29,7 +29,7 @@
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/regs-ssp.h>
#include <mach/audio.h>
#include <mach/ssp.h>
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 812c2b4..a4a655f 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -20,8 +20,8 @@
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
#include <mach/regs-ac97.h>
+#include <mach/dma.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 517991f..223de89 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -24,7 +24,7 @@
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
+#include <mach/dma.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/audio.h>
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index a3b9e6b..de8778f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -26,8 +26,6 @@
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index c77194f..050223d 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -30,8 +30,6 @@
#include <asm/mach-types.h>
#include <mach/tosa.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/audio.h>
#include "../codecs/wm9712.h"
