hp accelerometer: add freefall detection
This adds freefall handling to hp_accel driver. According to HP, it
should just work, without us having to set the chip up by hand.
hpfall.c is example .c program that parks the disk when accelerometer
detects free fall. It should work; for now, it uses fixed 20seconds
protection period.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 219d2d0..3afa3af 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2007-2008 Yan Burman
* Copyright (C) 2008 Eric Piel
- * Copyright (C) 2008 Pavel Machek
+ * Copyright (C) 2008-2009 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -35,6 +35,7 @@
#include <linux/poll.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
@@ -55,7 +56,10 @@
/* Maximum value our axis may get for the input device (signed 12 bits) */
#define MDPS_MAX_VAL 2048
-struct acpi_lis3lv02d adev;
+struct acpi_lis3lv02d adev = {
+ .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+};
+
EXPORT_SYMBOL_GPL(adev);
static int lis3lv02d_add_fs(struct acpi_device *device);
@@ -110,26 +114,13 @@
void lis3lv02d_poweroff(acpi_handle handle)
{
adev.is_on = 0;
- /* disable X,Y,Z axis and power down */
- adev.write(handle, CTRL_REG1, 0x00);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
void lis3lv02d_poweron(acpi_handle handle)
{
- u8 val;
-
adev.is_on = 1;
adev.init(handle);
- adev.write(handle, FF_WU_CFG, 0);
- /*
- * BDU: LSB and MSB values are not updated until both have been read.
- * So the value read will always be correct.
- * IEN: Interrupt for free-fall and DD, not for data-ready.
- */
- adev.read(handle, CTRL_REG2, &val);
- val |= CTRL2_BDU | CTRL2_IEN;
- adev.write(handle, CTRL_REG2, val);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@@ -162,6 +153,140 @@
mutex_unlock(&dev->lock);
}
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+ /*
+ * Be careful: on some HP laptops the bios force DD when on battery and
+ * the lid is closed. This leads to interrupts as soon as a little move
+ * is done.
+ */
+ atomic_inc(&adev.count);
+
+ wake_up_interruptible(&adev.misc_wait);
+ kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+ return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ if (test_and_set_bit(0, &adev.misc_opened))
+ return -EBUSY; /* already open */
+
+ atomic_set(&adev.count, 0);
+
+ /*
+ * The sensor can generate interrupts for free-fall and direction
+ * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+ * the things simple and _fast_ we activate it only for free-fall, so
+ * no need to read register (very slow with ACPI). For the same reason,
+ * we forbid shared interrupts.
+ *
+ * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+ * io-apic is not configurable (and generates a warning) but I keep it
+ * in case of support for other hardware.
+ */
+ ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+ DRIVER_NAME, &adev);
+
+ if (ret) {
+ clear_bit(0, &adev.misc_opened);
+ printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+ return -EBUSY;
+ }
+ lis3lv02d_increase_use(&adev);
+ printk("lis3: registered interrupt %d\n", adev.irq);
+ return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+ fasync_helper(-1, file, 0, &adev.async_queue);
+ lis3lv02d_decrease_use(&adev);
+ free_irq(adev.irq, &adev);
+ clear_bit(0, &adev.misc_opened); /* release the device */
+ return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ u32 data;
+ unsigned char byte_data;
+ ssize_t retval = 1;
+
+ if (count < 1)
+ return -EINVAL;
+
+ add_wait_queue(&adev.misc_wait, &wait);
+ while (true) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = atomic_xchg(&adev.count, 0);
+ if (data)
+ break;
+
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+
+ schedule();
+ }
+
+ if (data < 255)
+ byte_data = data;
+ else
+ byte_data = 255;
+
+ /* make sure we are not going into copy_to_user() with
+ * TASK_INTERRUPTIBLE state */
+ set_current_state(TASK_RUNNING);
+ if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+ retval = -EFAULT;
+
+out:
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&adev.misc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &adev.misc_wait, wait);
+ if (atomic_read(&adev.count))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+ return fasync_helper(fd, file, on, &adev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = lis3lv02d_misc_read,
+ .open = lis3lv02d_misc_open,
+ .release = lis3lv02d_misc_release,
+ .poll = lis3lv02d_misc_poll,
+ .fasync = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "freefall",
+ .fops = &lis3lv02d_misc_fops,
+};
+
/**
* lis3lv02d_joystick_kthread - Kthread polling function
* @data: unused - here to conform to threadfn prototype
@@ -203,7 +328,6 @@
lis3lv02d_decrease_use(&adev);
}
-
static inline void lis3lv02d_calibrate_joystick(void)
{
lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
@@ -250,6 +374,7 @@
if (!adev.idev)
return;
+ misc_deregister(&lis3lv02d_misc_device);
input_unregister_device(adev.idev);
adev.idev = NULL;
}
@@ -268,6 +393,19 @@
if (lis3lv02d_joystick_enable())
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+ printk("lis3_init_device: irq %d\n", dev->irq);
+
+ /* if we did not get an IRQ from ACPI - we have nothing more to do */
+ if (!dev->irq) {
+ printk(KERN_ERR DRIVER_NAME
+ ": No IRQ in ACPI. Disabling /dev/freefall\n");
+ goto out;
+ }
+
+ printk("lis3: registering device\n");
+ if (misc_register(&lis3lv02d_misc_device))
+ printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+out:
lis3lv02d_decrease_use(dev);
return 0;
}
@@ -351,6 +489,6 @@
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
-MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
MODULE_LICENSE("GPL");