ARM: OMAP: correct misc 15xx and non-15xx platform code
Disable accesses to SOFT_REQ_REG2 and ULPD_SOFT_DISABLE_REQ_REG
registers for 15xx processors that don't have these registers. Enable
level 2 interrupt handler for processors that identify as OMAP 15xx
(e.g 310) and not 1510 specifically. Also fix the following compiler
warning (only visible with CONFIG_OMAP_RESET_CLOCKS):
arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused':
arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in
function returning void
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638490e..f8e1294 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -496,7 +496,7 @@
}
}
- return 0;
+ return;
}
static void omap1_clk_disable_generic(struct clk *clk)
@@ -654,7 +654,8 @@
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
- omap_writew(0, SOFT_REQ_REG2);
+ if (!cpu_is_omap15xx())
+ omap_writew(0, SOFT_REQ_REG2);
clk_init(&omap1_clk_functions);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6383a12..410d3e7 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -238,7 +238,7 @@
if (cpu_is_omap730())
omap_unmask_irq(INT_730_IH2_IRQ);
- else if (cpu_is_omap1510())
+ else if (cpu_is_omap15xx())
omap_unmask_irq(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())
omap_unmask_irq(INT_1610_IH2_IRQ);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 4834758..8ff2320 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -256,7 +256,8 @@
tps65010_set_led(LED1, OFF);
}
- omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+ if (!cpu_is_omap15xx())
+ omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
/*
* Step 1: turn off interrupts (FIXME: NOTE: already disabled)
@@ -434,7 +435,8 @@
MPUI1610_RESTORE(OMAP_IH2_3_MIR);
}
- omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+ if (!cpu_is_omap15xx())
+ omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
/*
* Reenable interrupts