diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 30d9492..6542dc0 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -31,8 +31,6 @@
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 
-#include "cs4270.h"
-
 /*
  * The codec isn't really big-endian or little-endian, since the I2S
  * interface requires data to be sent serially with the MSbit first.
@@ -114,7 +112,8 @@
 
 /* Private data for the CS4270 */
 struct cs4270_private {
-	struct snd_soc_codec codec;
+	enum snd_soc_control_type control_type;
+	void *control_data;
 	u8 reg_cache[CS4270_NUMREGS];
 	unsigned int mclk; /* Input frequency of the MCLK pin */
 	unsigned int mode; /* The mode (I2S or left-justified) */
@@ -212,44 +211,8 @@
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-	unsigned int rates = 0;
-	unsigned int rate_min = -1;
-	unsigned int rate_max = 0;
-	unsigned int i;
 
 	cs4270->mclk = freq;
-
-	if (cs4270->mclk) {
-		for (i = 0; i < NUM_MCLK_RATIOS; i++) {
-			unsigned int rate = freq / cs4270_mode_ratios[i].ratio;
-			rates |= snd_pcm_rate_to_rate_bit(rate);
-			if (rate < rate_min)
-				rate_min = rate;
-			if (rate > rate_max)
-				rate_max = rate;
-		}
-		/* FIXME: soc should support a rate list */
-		rates &= ~SNDRV_PCM_RATE_KNOT;
-
-		if (!rates) {
-			dev_err(codec->dev, "could not find a valid sample rate\n");
-			return -EINVAL;
-		}
-	} else {
-		/* enable all possible rates */
-		rates = SNDRV_PCM_RATE_8000_192000;
-		rate_min = 8000;
-		rate_max = 192000;
-	}
-
-	codec_dai->playback.rates = rates;
-	codec_dai->playback.rate_min = rate_min;
-	codec_dai->playback.rate_max = rate_max;
-
-	codec_dai->capture.rates = rates;
-	codec_dai->capture.rate_min = rate_min;
-	codec_dai->capture.rate_max = rate_max;
-
 	return 0;
 }
 
@@ -410,8 +373,7 @@
 			    struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_device *socdev = rtd->socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = rtd->codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 	int ret;
 	unsigned int i;
@@ -549,19 +511,6 @@
 		snd_soc_get_volsw, cs4270_soc_put_mute),
 };
 
-/*
- * cs4270_codec - global variable to store codec for the ASoC probe function
- *
- * If struct i2c_driver had a private_data field, we wouldn't need to use
- * cs4270_codec.  This is the only way to pass the codec structure from
- * cs4270_i2c_probe() to cs4270_probe().  Unfortunately, there is no good
- * way to synchronize these two functions.  cs4270_i2c_probe() can be called
- * multiple times before cs4270_probe() is called even once.  So for now, we
- * also only allow cs4270_i2c_probe() to be run once.  That means that we do
- * not support more than one cs4270 device in the system, at least for now.
- */
-static struct snd_soc_codec *cs4270_codec;
-
 static struct snd_soc_dai_ops cs4270_dai_ops = {
 	.hw_params	= cs4270_hw_params,
 	.set_sysclk	= cs4270_set_dai_sysclk,
@@ -569,20 +518,24 @@
 	.digital_mute	= cs4270_dai_mute,
 };
 
-struct snd_soc_dai cs4270_dai = {
-	.name = "cs4270",
+struct snd_soc_dai_driver cs4270_dai = {
+	.name = "cs4270-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
-		.rates = 0,
+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
+		.rate_min = 4000,
+		.rate_max = 216000,
 		.formats = CS4270_FORMATS,
 	},
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
-		.rates = 0,
+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
+		.rate_min = 4000,
+		.rate_max = 216000,
 		.formats = CS4270_FORMATS,
 	},
 	.ops = &cs4270_dai_ops,
@@ -596,153 +549,19 @@
  * This function is called when ASoC has all the pieces it needs to
  * instantiate a sound driver.
  */
-static int cs4270_probe(struct platform_device *pdev)
+static int cs4270_probe(struct snd_soc_codec *codec)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = cs4270_codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-	int i, ret;
+	int i, ret, reg;
 
-	/* Connect the codec to the socdev.  snd_soc_new_pcms() needs this. */
-	socdev->card->codec = codec;
-
-	/* Register PCMs */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to create pcms\n");
-		return ret;
-	}
-
-	/* Add the non-DAPM controls */
-	ret = snd_soc_add_controls(codec, cs4270_snd_controls,
-				ARRAY_SIZE(cs4270_snd_controls));
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to add controls\n");
-		goto error_free_pcms;
-	}
-
-	/* get the power supply regulators */
-	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
-		cs4270->supplies[i].supply = supply_names[i];
-
-	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
-				 cs4270->supplies);
-	if (ret < 0)
-		goto error_free_pcms;
-
-	ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
-				    cs4270->supplies);
-	if (ret < 0)
-		goto error_free_regulators;
-
-	return 0;
-
-error_free_regulators:
-	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
-			    cs4270->supplies);
-
-error_free_pcms:
-	snd_soc_free_pcms(socdev);
-
-	return ret;
-}
-
-/**
- * cs4270_remove - ASoC remove function
- * @pdev: platform device
- *
- * This function is the counterpart to cs4270_probe().
- */
-static int cs4270_remove(struct platform_device *pdev)
-{
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = cs4270_codec;
-	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-
-	snd_soc_free_pcms(socdev);
-	regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
-	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
-
-	return 0;
-};
-
-/**
- * cs4270_i2c_probe - initialize the I2C interface of the CS4270
- * @i2c_client: the I2C client object
- * @id: the I2C device ID (ignored)
- *
- * This function is called whenever the I2C subsystem finds a device that
- * matches the device ID given via a prior call to i2c_add_driver().
- */
-static int cs4270_i2c_probe(struct i2c_client *i2c_client,
-	const struct i2c_device_id *id)
-{
-	struct snd_soc_codec *codec;
-	struct cs4270_private *cs4270;
-	unsigned int reg;
-	int ret;
-
-	/* For now, we only support one cs4270 device in the system.  See the
-	 * comment for cs4270_codec.
-	 */
-	if (cs4270_codec) {
-		dev_err(&i2c_client->dev, "ignoring CS4270 at addr %X\n",
-		       i2c_client->addr);
-		dev_err(&i2c_client->dev, "only one per board allowed\n");
-		/* Should we return something other than ENODEV here? */
-		return -ENODEV;
-	}
-
-	/* Verify that we have a CS4270 */
-
-	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
-	if (ret < 0) {
-		dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
-		       i2c_client->addr);
-		return ret;
-	}
-	/* The top four bits of the chip ID should be 1100. */
-	if ((ret & 0xF0) != 0xC0) {
-		dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
-		       i2c_client->addr);
-		return -ENODEV;
-	}
-
-	dev_info(&i2c_client->dev, "found device at i2c address %X\n",
-		i2c_client->addr);
-	dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF);
-
-	/* Allocate enough space for the snd_soc_codec structure
-	   and our private data together. */
-	cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL);
-	if (!cs4270) {
-		dev_err(&i2c_client->dev, "could not allocate codec\n");
-		return -ENOMEM;
-	}
-	codec = &cs4270->codec;
-
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-
-	codec->dev = &i2c_client->dev;
-	codec->name = "CS4270";
-	codec->owner = THIS_MODULE;
-	codec->dai = &cs4270_dai;
-	codec->num_dai = 1;
-	snd_soc_codec_set_drvdata(codec, cs4270);
-	codec->control_data = i2c_client;
-	codec->read = cs4270_read_reg_cache;
-	codec->write = cs4270_i2c_write;
-	codec->reg_cache = cs4270->reg_cache;
-	codec->reg_cache_size = CS4270_NUMREGS;
+	codec->control_data = cs4270->control_data;
 
 	/* The I2C interface is set up, so pre-fill our register cache */
 
 	ret = cs4270_fill_cache(codec);
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "failed to fill register cache\n");
-		goto error_free_codec;
+		dev_err(codec->dev, "failed to fill register cache\n");
+		return ret;
 	}
 
 	/* Disable auto-mute.  This feature appears to be buggy.  In some
@@ -755,7 +574,7 @@
 	reg &= ~CS4270_MUTE_AUTO;
 	ret = cs4270_i2c_write(codec, CS4270_MUTE, reg);
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "i2c write failed\n");
+		dev_err(codec->dev, "i2c write failed\n");
 		return ret;
 	}
 
@@ -769,65 +588,56 @@
 	reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO);
 	ret = cs4270_i2c_write(codec, CS4270_TRANS, reg);
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "i2c write failed\n");
+		dev_err(codec->dev, "i2c write failed\n");
 		return ret;
 	}
 
-	/* Initialize the DAI. Normally, we'd prefer to have a kmalloc'd DAI
-	 * structure for each CS4270 device, but the machine driver needs to
-	 * have a pointer to the DAI structure, so for now it must be a global
-	 * variable.
-	 */
-	cs4270_dai.dev = &i2c_client->dev;
-
-	/* Register the DAI.  If all the other ASoC driver have already
-	 * registered, then this will call our probe function, so
-	 * cs4270_codec needs to be ready.
-	 */
-	cs4270_codec = codec;
-	ret = snd_soc_register_dai(&cs4270_dai);
+	/* Add the non-DAPM controls */
+	ret = snd_soc_add_controls(codec, cs4270_snd_controls,
+				ARRAY_SIZE(cs4270_snd_controls));
 	if (ret < 0) {
-		dev_err(&i2c_client->dev, "failed to register DAIe\n");
-		goto error_free_codec;
+		dev_err(codec->dev, "failed to add controls\n");
+		return ret;
 	}
 
-	i2c_set_clientdata(i2c_client, cs4270);
+	/* get the power supply regulators */
+	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+		cs4270->supplies[i].supply = supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
+				 cs4270->supplies);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
+				    cs4270->supplies);
+	if (ret < 0)
+		goto error_free_regulators;
 
 	return 0;
 
-error_free_codec:
-	kfree(cs4270);
-	cs4270_codec = NULL;
-	cs4270_dai.dev = NULL;
+error_free_regulators:
+	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
+			    cs4270->supplies);
 
 	return ret;
 }
 
 /**
- * cs4270_i2c_remove - remove an I2C device
- * @i2c_client: the I2C client object
+ * cs4270_remove - ASoC remove function
+ * @pdev: platform device
  *
- * This function is the counterpart to cs4270_i2c_probe().
+ * This function is the counterpart to cs4270_probe().
  */
-static int cs4270_i2c_remove(struct i2c_client *i2c_client)
+static int cs4270_remove(struct snd_soc_codec *codec)
 {
-	struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client);
+	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 
-	kfree(cs4270);
-	cs4270_codec = NULL;
-	cs4270_dai.dev = NULL;
+	regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
+	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
 
 	return 0;
-}
-
-/*
- * cs4270_id - I2C device IDs supported by this driver
- */
-static struct i2c_device_id cs4270_id[] = {
-	{"cs4270", 0},
-	{}
 };
-MODULE_DEVICE_TABLE(i2c, cs4270_id);
 
 #ifdef CONFIG_PM
 
@@ -840,9 +650,8 @@
  * and all registers are written back to the hardware when resuming.
  */
 
-static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
+static int cs4270_soc_suspend(struct snd_soc_codec *codec, pm_message_t mesg)
 {
-	struct snd_soc_codec *codec = cs4270_codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 	int reg, ret;
 
@@ -860,9 +669,8 @@
 	return 0;
 }
 
-static int cs4270_soc_resume(struct platform_device *pdev)
+static int cs4270_soc_resume(struct snd_soc_codec *codec)
 {
-	struct snd_soc_codec *codec = cs4270_codec;
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
 	struct i2c_client *i2c_client = codec->control_data;
 	int reg;
@@ -896,6 +704,95 @@
 #endif /* CONFIG_PM */
 
 /*
+ * ASoC codec device structure
+ *
+ * Assign this variable to the codec_dev field of the machine driver's
+ * snd_soc_device structure.
+ */
+static struct snd_soc_codec_driver soc_codec_device_cs4270 = {
+	.probe =	cs4270_probe,
+	.remove =	cs4270_remove,
+	.suspend =	cs4270_soc_suspend,
+	.resume =	cs4270_soc_resume,
+	.read = cs4270_read_reg_cache,
+	.write = cs4270_i2c_write,
+	.reg_cache_size = CS4270_NUMREGS,
+	.reg_word_size = sizeof(u8),
+};
+
+/**
+ * cs4270_i2c_probe - initialize the I2C interface of the CS4270
+ * @i2c_client: the I2C client object
+ * @id: the I2C device ID (ignored)
+ *
+ * This function is called whenever the I2C subsystem finds a device that
+ * matches the device ID given via a prior call to i2c_add_driver().
+ */
+static int cs4270_i2c_probe(struct i2c_client *i2c_client,
+	const struct i2c_device_id *id)
+{
+	struct cs4270_private *cs4270;
+	int ret;
+
+	/* Verify that we have a CS4270 */
+
+	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n",
+		       i2c_client->addr);
+		return ret;
+	}
+	/* The top four bits of the chip ID should be 1100. */
+	if ((ret & 0xF0) != 0xC0) {
+		dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n",
+		       i2c_client->addr);
+		return -ENODEV;
+	}
+
+	dev_info(&i2c_client->dev, "found device at i2c address %X\n",
+		i2c_client->addr);
+	dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF);
+
+	cs4270 = kzalloc(sizeof(struct cs4270_private), GFP_KERNEL);
+	if (!cs4270) {
+		dev_err(&i2c_client->dev, "could not allocate codec\n");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c_client, cs4270);
+	cs4270->control_data = i2c_client;
+	cs4270->control_type = SND_SOC_I2C;
+
+	ret = snd_soc_register_codec(&i2c_client->dev,
+			&soc_codec_device_cs4270, &cs4270_dai, 1);
+	if (ret < 0)
+		kfree(cs4270);
+	return ret;
+}
+
+/**
+ * cs4270_i2c_remove - remove an I2C device
+ * @i2c_client: the I2C client object
+ *
+ * This function is the counterpart to cs4270_i2c_probe().
+ */
+static int cs4270_i2c_remove(struct i2c_client *i2c_client)
+{
+	snd_soc_unregister_codec(&i2c_client->dev);
+	kfree(i2c_get_clientdata(i2c_client));
+	return 0;
+}
+
+/*
+ * cs4270_id - I2C device IDs supported by this driver
+ */
+static struct i2c_device_id cs4270_id[] = {
+	{"cs4270", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs4270_id);
+
+/*
  * cs4270_i2c_driver - I2C device identification
  *
  * This structure tells the I2C subsystem how to identify and support a
@@ -903,7 +800,7 @@
  */
 static struct i2c_driver cs4270_i2c_driver = {
 	.driver = {
-		.name = "cs4270",
+		.name = "cs4270-codec",
 		.owner = THIS_MODULE,
 	},
 	.id_table = cs4270_id,
@@ -911,20 +808,6 @@
 	.remove = cs4270_i2c_remove,
 };
 
-/*
- * ASoC codec device structure
- *
- * Assign this variable to the codec_dev field of the machine driver's
- * snd_soc_device structure.
- */
-struct snd_soc_codec_device soc_codec_device_cs4270 = {
-	.probe = 	cs4270_probe,
-	.remove = 	cs4270_remove,
-	.suspend =	cs4270_soc_suspend,
-	.resume =	cs4270_soc_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_device_cs4270);
-
 static int __init cs4270_init(void)
 {
 	pr_info("Cirrus Logic CS4270 ALSA SoC Codec Driver\n");