blob: 585cc013639dee5f4cbbf521f7dde822d6944e88 [file] [log] [blame]
/*
*
* arch/arm/mach-u300/mmc.c
*
*
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
*
* Author: Linus Walleij <linus.walleij@stericsson.com>
* Author: Johan Lundin <johan.lundin@stericsson.com>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
*/
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/mmc/host.h>
#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <asm/mach/mmc.h>
#include "mmc.h"
struct mmci_card_event {
struct input_dev *mmc_input;
int mmc_inserted;
struct work_struct workq;
struct mmc_platform_data mmc0_plat_data;
};
static unsigned int mmc_status(struct device *dev)
{
struct mmci_card_event *mmci_card = container_of(
dev->platform_data,
struct mmci_card_event, mmc0_plat_data);
return mmci_card->mmc_inserted;
}
/*
* Here follows a large chunk of code which will only be enabled if you
* have both the AB3100 chip mounted and the MMC subsystem activated.
*/
static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
{
int v;
/*
* MMC Spec:
* bit 7: 1.70 - 1.95V
* bit 8 - 14: 2.0 - 2.6V
* bit 15 - 23: 2.7 - 3.6V
*
* ab3100 voltages:
* 000 - 2.85V
* 001 - 2.75V
* 010 - 1.8V
* 011 - 1.5V
*/
switch (voltage) {
case 8:
v = 3;
break;
case 9:
case 10:
case 11:
case 12:
case 13:
case 14:
case 15:
v = 1;
break;
case 16:
v = 1;
break;
case 17:
case 18:
case 19:
case 20:
case 21:
case 22:
case 23:
case 24:
v = 0;
break;
default:
v = 0;
break;
}
/* PL180 voltage register bits */
return v << 2;
}
static int mmci_callback(void *data)
{
struct mmci_card_event *mmci_card = data;
disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD);
schedule_work(&mmci_card->workq);
return 0;
}
static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct mmci_card_event *mmci_card = container_of(
dev->platform_data,
struct mmci_card_event, mmc0_plat_data);
return sprintf(buf, "%d\n", !mmci_card->mmc_inserted);
}
static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL);
static void _mmci_callback(struct work_struct *ws)
{
struct mmci_card_event *mmci_card = container_of(
ws,
struct mmci_card_event, workq);
mdelay(20);
mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
input_report_switch(mmci_card->mmc_input, KEY_INSERT,
!mmci_card->mmc_inserted);
input_sync(mmci_card->mmc_input);
pr_debug("MMC/SD card was %s\n",
mmci_card->mmc_inserted ? "removed" : "inserted");
enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
}
int __devinit mmc_init(struct amba_device *adev)
{
struct mmci_card_event *mmci_card;
struct device *mmcsd_device = &adev->dev;
int ret = 0;
mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
if (!mmci_card)
return -ENOMEM;
/* Nominally 2.85V on our platform */
mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
INIT_WORK(&mmci_card->workq, _mmci_callback);
ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection");
if (ret) {
printk(KERN_CRIT "Could not allocate MMC card detection " \
"GPIO pin\n");
goto out;
}
ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD);
if (ret) {
printk(KERN_CRIT "Invalid GPIO pin requested\n");
goto out;
}
ret = sysfs_create_file(&mmcsd_device->kobj,
&dev_attr_mmc_inserted.attr);
if (ret)
goto out;
mmci_card->mmc_input = input_allocate_device();
if (!mmci_card->mmc_input) {
printk(KERN_CRIT "Could not allocate MMC input device\n");
return -ENOMEM;
}
mmci_card->mmc_input->name = "MMC insert notification";
mmci_card->mmc_input->id.bustype = BUS_HOST;
mmci_card->mmc_input->id.vendor = 0;
mmci_card->mmc_input->id.product = 0;
mmci_card->mmc_input->id.version = 0x0100;
mmci_card->mmc_input->dev.parent = mmcsd_device;
input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT);
/*
* Since this must always be compiled into the kernel, this input
* is never unregistered or free:ed.
*/
ret = input_register_device(mmci_card->mmc_input);
if (ret) {
input_free_device(mmci_card->mmc_input);
goto out;
}
input_set_drvdata(mmci_card->mmc_input, mmci_card);
ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
mmci_card);
schedule_work(&mmci_card->workq);
printk(KERN_INFO "Registered MMC insert/remove notification\n");
out:
return ret;
}