spi_mpc83xx.c: support QE enabled 83xx CPU's like mpc832x
Quicc Engine enabled mpc83xx CPU's has a somewhat different HW interface to
the SPI controller. This patch adds a qe_mode knob that sees to that
needed adaptions are performed.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index bbd51bc..3295cfcc 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -47,6 +47,7 @@
#define SPMODE_ENABLE (1 << 24)
#define SPMODE_LEN(x) ((x) << 20)
#define SPMODE_PM(x) ((x) << 16)
+#define SPMODE_OP (1 << 14)
/*
* Default for SPI Mode:
@@ -85,6 +86,11 @@
unsigned nsecs; /* (clock cycle time)/2 */
u32 sysclk;
+ u32 rx_shift; /* RX data reg shift when in qe mode */
+ u32 tx_shift; /* TX data reg shift when in qe mode */
+
+ bool qe_mode;
+
void (*activate_cs) (u8 cs, u8 polarity);
void (*deactivate_cs) (u8 cs, u8 polarity);
};
@@ -103,7 +109,7 @@
void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
{ \
type * rx = mpc83xx_spi->rx; \
- *rx++ = (type)data; \
+ *rx++ = (type)(data >> mpc83xx_spi->rx_shift); \
mpc83xx_spi->rx = rx; \
}
@@ -114,7 +120,7 @@
const type * tx = mpc83xx_spi->tx; \
if (!tx) \
return 0; \
- data = *tx++; \
+ data = *tx++ << mpc83xx_spi->tx_shift; \
mpc83xx_spi->tx = tx; \
return data; \
}
@@ -203,12 +209,22 @@
|| ((bits_per_word > 16) && (bits_per_word != 32)))
return -EINVAL;
+ mpc83xx_spi->rx_shift = 0;
+ mpc83xx_spi->tx_shift = 0;
if (bits_per_word <= 8) {
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ if (mpc83xx_spi->qe_mode) {
+ mpc83xx_spi->rx_shift = 16;
+ mpc83xx_spi->tx_shift = 24;
+ }
} else if (bits_per_word <= 16) {
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+ if (mpc83xx_spi->qe_mode) {
+ mpc83xx_spi->rx_shift = 16;
+ mpc83xx_spi->tx_shift = 16;
+ }
} else if (bits_per_word <= 32) {
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
@@ -386,7 +402,6 @@
ret = -ENODEV;
goto free_master;
}
-
mpc83xx_spi = spi_master_get_devdata(master);
mpc83xx_spi->bitbang.master = spi_master_get(master);
mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
@@ -395,9 +410,17 @@
mpc83xx_spi->sysclk = pdata->sysclk;
mpc83xx_spi->activate_cs = pdata->activate_cs;
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+ mpc83xx_spi->qe_mode = pdata->qe_mode;
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ mpc83xx_spi->rx_shift = 0;
+ mpc83xx_spi->tx_shift = 0;
+ if (mpc83xx_spi->qe_mode) {
+ mpc83xx_spi->rx_shift = 16;
+ mpc83xx_spi->tx_shift = 24;
+ }
+
mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
init_completion(&mpc83xx_spi->done);
@@ -432,6 +455,9 @@
/* Enable SPI interface */
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+ if (pdata->qe_mode)
+ regval |= SPMODE_OP;
+
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index 12e631f..695741b 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -112,7 +112,7 @@
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
u16 bus_num;
-
+ bool qe_mode;
/* board specific information */
u16 max_chipselect;
void (*activate_cs)(u8 cs, u8 polarity);