| # |
| # EDAC Kconfig |
| # Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com |
| # Licensed and distributed under the GPL |
| # |
| |
| menuconfig EDAC |
| bool "EDAC (Error Detection And Correction) reporting" |
| depends on HAS_IOMEM |
| depends on X86 || PPC |
| help |
| EDAC is designed to report errors in the core system. |
| These are low-level errors that are reported in the CPU or |
| supporting chipset or other subsystems: |
| memory errors, cache errors, PCI errors, thermal throttling, etc.. |
| If unsure, select 'Y'. |
| |
| If this code is reporting problems on your system, please |
| see the EDAC project web pages for more information at: |
| |
| <http://bluesmoke.sourceforge.net/> |
| |
| and: |
| |
| <http://buttersideup.com/edacwiki> |
| |
| There is also a mailing list for the EDAC project, which can |
| be found via the sourceforge page. |
| |
| if EDAC |
| |
| comment "Reporting subsystems" |
| |
| config EDAC_DEBUG |
| bool "Debugging" |
| help |
| This turns on debugging information for the entire EDAC |
| sub-system. You can insert module with "debug_level=x", current |
| there're four debug levels (x=0,1,2,3 from low to high). |
| Usually you should select 'N'. |
| |
| config EDAC_DEBUG_VERBOSE |
| bool "More verbose debugging" |
| depends on EDAC_DEBUG |
| help |
| This option makes debugging information more verbose. |
| Source file name and line number where debugging message |
| printed will be added to debugging message. |
| |
| config EDAC_DECODE_MCE |
| tristate "Decode MCEs in human-readable form (only on AMD for now)" |
| depends on CPU_SUP_AMD && X86_MCE |
| default y |
| ---help--- |
| Enable this option if you want to decode Machine Check Exceptions |
| occuring on your machine in human-readable form. |
| |
| You should definitely say Y here in case you want to decode MCEs |
| which occur really early upon boot, before the module infrastructure |
| has been initialized. |
| |
| config EDAC_MM_EDAC |
| tristate "Main Memory EDAC (Error Detection And Correction) reporting" |
| help |
| Some systems are able to detect and correct errors in main |
| memory. EDAC can report statistics on memory error |
| detection and correction (EDAC - or commonly referred to ECC |
| errors). EDAC will also try to decode where these errors |
| occurred so that a particular failing memory module can be |
| replaced. If unsure, select 'Y'. |
| |
| config EDAC_MCE |
| bool |
| |
| config EDAC_AMD64 |
| tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h" |
| depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE |
| help |
| Support for error detection and correction on the AMD 64 |
| Families of Memory Controllers (K8, F10h and F11h) |
| |
| config EDAC_AMD64_ERROR_INJECTION |
| bool "Sysfs Error Injection facilities" |
| depends on EDAC_AMD64 |
| help |
| Recent Opterons (Family 10h and later) provide for Memory Error |
| Injection into the ECC detection circuits. The amd64_edac module |
| allows the operator/user to inject Uncorrectable and Correctable |
| errors into DRAM. |
| |
| When enabled, in each of the respective memory controller directories |
| (/sys/devices/system/edac/mc/mcX), there are 3 input files: |
| |
| - inject_section (0..3, 16-byte section of 64-byte cacheline), |
| - inject_word (0..8, 16-bit word of 16-byte section), |
| - inject_ecc_vector (hex ecc vector: select bits of inject word) |
| |
| In addition, there are two control files, inject_read and inject_write, |
| which trigger the DRAM ECC Read and Write respectively. |
| |
| config EDAC_AMD76X |
| tristate "AMD 76x (760, 762, 768)" |
| depends on EDAC_MM_EDAC && PCI && X86_32 |
| help |
| Support for error detection and correction on the AMD 76x |
| series of chipsets used with the Athlon processor. |
| |
| config EDAC_E7XXX |
| tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" |
| depends on EDAC_MM_EDAC && PCI && X86_32 |
| help |
| Support for error detection and correction on the Intel |
| E7205, E7500, E7501 and E7505 server chipsets. |
| |
| config EDAC_E752X |
| tristate "Intel e752x (e7520, e7525, e7320) and 3100" |
| depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG |
| help |
| Support for error detection and correction on the Intel |
| E7520, E7525, E7320 server chipsets. |
| |
| config EDAC_I82443BXGX |
| tristate "Intel 82443BX/GX (440BX/GX)" |
| depends on EDAC_MM_EDAC && PCI && X86_32 |
| depends on BROKEN |
| help |
| Support for error detection and correction on the Intel |
| 82443BX/GX memory controllers (440BX/GX chipsets). |
| |
| config EDAC_I82875P |
| tristate "Intel 82875p (D82875P, E7210)" |
| depends on EDAC_MM_EDAC && PCI && X86_32 |
| help |
| Support for error detection and correction on the Intel |
| DP82785P and E7210 server chipsets. |
| |
| config EDAC_I82975X |
| tristate "Intel 82975x (D82975x)" |
| depends on EDAC_MM_EDAC && PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| DP82975x server chipsets. |
| |
| config EDAC_I3000 |
| tristate "Intel 3000/3010" |
| depends on EDAC_MM_EDAC && PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| 3000 and 3010 server chipsets. |
| |
| config EDAC_I3200 |
| tristate "Intel 3200" |
| depends on EDAC_MM_EDAC && PCI && X86 && EXPERIMENTAL |
| help |
| Support for error detection and correction on the Intel |
| 3200 and 3210 server chipsets. |
| |
| config EDAC_X38 |
| tristate "Intel X38" |
| depends on EDAC_MM_EDAC && PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| X38 server chipsets. |
| |
| config EDAC_I5400 |
| tristate "Intel 5400 (Seaburg) chipsets" |
| depends on EDAC_MM_EDAC && PCI && X86 |
| help |
| Support for error detection and correction the Intel |
| i5400 MCH chipset (Seaburg). |
| |
| config EDAC_I7CORE |
| tristate "Intel i7 Core (Nehalem) processors" |
| depends on EDAC_MM_EDAC && PCI && X86 |
| select EDAC_MCE |
| help |
| Support for error detection and correction the Intel |
| i7 Core (Nehalem) Integrated Memory Controller that exists on |
| newer processors like i7 Core, i7 Core Extreme, Xeon 35xx |
| and Xeon 55xx processors. |
| |
| config EDAC_I82860 |
| tristate "Intel 82860" |
| depends on EDAC_MM_EDAC && PCI && X86_32 |
| help |
| Support for error detection and correction on the Intel |
| 82860 chipset. |
| |
| config EDAC_R82600 |
| tristate "Radisys 82600 embedded chipset" |
| depends on EDAC_MM_EDAC && PCI && X86_32 |
| help |
| Support for error detection and correction on the Radisys |
| 82600 embedded chipset. |
| |
| config EDAC_I5000 |
| tristate "Intel Greencreek/Blackford chipset" |
| depends on EDAC_MM_EDAC && X86 && PCI |
| help |
| Support for error detection and correction the Intel |
| Greekcreek/Blackford chipsets. |
| |
| config EDAC_I5100 |
| tristate "Intel San Clemente MCH" |
| depends on EDAC_MM_EDAC && X86 && PCI |
| help |
| Support for error detection and correction the Intel |
| San Clemente MCH. |
| |
| config EDAC_MPC85XX |
| tristate "Freescale MPC83xx / MPC85xx" |
| depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx) |
| help |
| Support for error detection and correction on the Freescale |
| MPC8349, MPC8560, MPC8540, MPC8548 |
| |
| config EDAC_MV64X60 |
| tristate "Marvell MV64x60" |
| depends on EDAC_MM_EDAC && MV64X60 |
| help |
| Support for error detection and correction on the Marvell |
| MV64360 and MV64460 chipsets. |
| |
| config EDAC_PASEMI |
| tristate "PA Semi PWRficient" |
| depends on EDAC_MM_EDAC && PCI |
| depends on PPC_PASEMI |
| help |
| Support for error detection and correction on PA Semi |
| PWRficient. |
| |
| config EDAC_CELL |
| tristate "Cell Broadband Engine memory controller" |
| depends on EDAC_MM_EDAC && PPC_CELL_COMMON |
| help |
| Support for error detection and correction on the |
| Cell Broadband Engine internal memory controller |
| on platform without a hypervisor |
| |
| config EDAC_PPC4XX |
| tristate "PPC4xx IBM DDR2 Memory Controller" |
| depends on EDAC_MM_EDAC && 4xx |
| help |
| This enables support for EDAC on the ECC memory used |
| with the IBM DDR2 memory controller found in various |
| PowerPC 4xx embedded processors such as the 405EX[r], |
| 440SP, 440SPe, 460EX, 460GT and 460SX. |
| |
| config EDAC_AMD8131 |
| tristate "AMD8131 HyperTransport PCI-X Tunnel" |
| depends on EDAC_MM_EDAC && PCI && PPC_MAPLE |
| help |
| Support for error detection and correction on the |
| AMD8131 HyperTransport PCI-X Tunnel chip. |
| Note, add more Kconfig dependency if it's adopted |
| on some machine other than Maple. |
| |
| config EDAC_AMD8111 |
| tristate "AMD8111 HyperTransport I/O Hub" |
| depends on EDAC_MM_EDAC && PCI && PPC_MAPLE |
| help |
| Support for error detection and correction on the |
| AMD8111 HyperTransport I/O Hub chip. |
| Note, add more Kconfig dependency if it's adopted |
| on some machine other than Maple. |
| |
| config EDAC_CPC925 |
| tristate "IBM CPC925 Memory Controller (PPC970FX)" |
| depends on EDAC_MM_EDAC && PPC64 |
| help |
| Support for error detection and correction on the |
| IBM CPC925 Bridge and Memory Controller, which is |
| a companion chip to the PowerPC 970 family of |
| processors. |
| |
| endif # EDAC |