Fix comment and Kconfig typos for 'require' and 'fragment'
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
index ea68046..299d0923 100644
--- a/Documentation/powerpc/dts-bindings/xilinx.txt
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -11,7 +11,7 @@
control how the core is synthesized. Historically, the EDK tool would
extract the device parameters relevant to device drivers and copy them
into an 'xparameters.h' in the form of #define symbols. This tells the
- device drivers how the IP cores are configured, but it requres the kernel
+ device drivers how the IP cores are configured, but it requires the kernel
to be recompiled every time the FPGA bitstream is resynthesized.
The new approach is to export the parameters into the device tree and
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 06e25d9..3fbb033 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -254,7 +254,7 @@
* On the second cpu, everything is set to IP5, which is
* ignored, EXCEPT the mailbox interrupt. That one is
* set to IP[2] so it is handled. This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
*/
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index ab44a2f..b452e3c 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -237,7 +237,7 @@
* On the second cpu, everything is set to IP5, which is
* ignored, EXCEPT the mailbox interrupt. That one is
* set to IP[2] so it is handled. This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
*/
#define IMR_IP2_VAL K_INT_MAP_I0
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 403857a..9d9434f 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -28,7 +28,7 @@
This options enables the fips boot option which is
required if you want to system to operate in a FIPS 200
certification. You should say no unless you know what
- this is. Note that CRYPTO_ANSI_CPRNG is requred if this
+ this is. Note that CRYPTO_ANSI_CPRNG is required if this
option is selected
config CRYPTO_ALGAPI
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9cd6de5..c297fc2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -904,9 +904,9 @@
memset(best_clock, 0, sizeof(*best_clock));
max_n = limit->n.max;
- /* based on hardware requriment prefer smaller n to precision */
+ /* based on hardware requirement, prefer smaller n to precision */
for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
- /* based on hardware requirment prefere larger m1,m2 */
+ /* based on hardware requirement, prefere larger m1,m2 */
for (clock.m1 = limit->m1.max;
clock.m1 >= limit->m1.min; clock.m1--) {
for (clock.m2 = limit->m2.max;
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 6732b5d..e91a815 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -3780,7 +3780,7 @@
UCHAR ucReserved[2];
}ATOM_ASIC_SS_ASSIGNMENT;
-//Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type.
+//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type.
//SS is not required or enabled if a match is not found.
#define ASIC_INTERNAL_MEMORY_SS 1
#define ASIC_INTERNAL_ENGINE_SS 2
@@ -5895,7 +5895,7 @@
UCHAR ucPadding; // For proper alignment and size.
USHORT usVDDC; // For the 780, use: None, Low, High, Variable
UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16}
- UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement.
+ UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement.
USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
ULONG ulFlags;
} ATOM_PPLIB_RS780_CLOCK_INFO;
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index ad36df9..fa82ce3 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -117,7 +117,7 @@
* NOTE: only one mode value must be given for every card.
* -> See hfc_multi.h for HFC_IO_MODE_* values
* By default, the IO mode is pci memory IO (MEMIO).
- * Some cards requre specific IO mode, so it cannot be changed.
+ * Some cards require specific IO mode, so it cannot be changed.
* It may be usefull to set IO mode to register io (REGIO) to solve
* PCI bridge problems.
* If unsure, don't give this parameter.
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 7600693..fd1f29e 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -683,7 +683,7 @@
#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
/*
- * The optic module verification commands requris bootcode
+ * The optic module verification commands require bootcode
* v5.0.6 or later
*/
#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 2663b2f..7fe54c2 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -95,7 +95,7 @@
* post_eurus_cmd helpers
*/
struct eurus_cmd_arg_info {
- int pre_arg; /* command requres arg1, arg2 at POST COMMAND */
+ int pre_arg; /* command requires arg1, arg2 at POST COMMAND */
int post_arg; /* command requires arg1, arg2 at GET_RESULT */
};
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
index ed3070e..4fcc435 100644
--- a/drivers/staging/vt6655/rxtx.c
+++ b/drivers/staging/vt6655/rxtx.c
@@ -25,19 +25,19 @@
* Date: May 20, 2003
*
* Functions:
- * s_vGenerateTxParameter - Generate tx dma requried parameter.
+ * s_vGenerateTxParameter - Generate tx dma required parameter.
* vGenerateMACHeader - Translate 802.3 to 802.11 header
- * cbGetFragCount - Caculate fragement number count
+ * cbGetFragCount - Caculate fragment number count
* csBeacon_xmit - beacon tx function
* csMgmt_xmit - management tx function
* s_cbFillTxBufHead - fulfill tx dma buffer header
* s_uGetDataDuration - get tx data required duration
* s_uFillDataHead- fulfill tx data duration header
- * s_uGetRTSCTSDuration- get rtx/cts requried duration
+ * s_uGetRTSCTSDuration- get rtx/cts required duration
* s_uGetRTSCTSRsvTime- get rts/cts reserved time
* s_uGetTxRsvTime- get frame reserved time
* s_vFillCTSHead- fulfill CTS ctl header
- * s_vFillFragParameter- Set fragement ctl parameter.
+ * s_vFillFragParameter- Set fragment ctl parameter.
* s_vFillRTSHead- fulfill RTS ctl header
* s_vFillTxKey- fulfill tx encrypt key
* s_vSWencryption- Software encrypt header
@@ -877,7 +877,7 @@
}
// Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account.
- // Otherwise, we need to modified codes for them.
+ // Otherwise, we need to modify codes for them.
if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {
if (byFBOption == AUTO_FB_NONE) {
PSRTS_g pBuf = (PSRTS_g)pvRTS;
@@ -1133,7 +1133,7 @@
*
* Parameters:
* In:
- * pDevice - Pointer to adpater
+ * pDevice - Pointer to adapter
* pTxDataHead - Transmit Data Buffer
* pTxBufHead - pTxBufHead
* pvRrvTime - pvRrvTime
@@ -2252,7 +2252,7 @@
*
* Parameters:
* In:
- * pDevice - Pointer to adpater
+ * pDevice - Pointer to adapter
* dwTxBufferAddr - Transmit Buffer
* pPacket - Packet from upper layer
* cbPacketSize - Transmit Data Length
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index d9fa36c..a2ce6fa 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -25,17 +25,17 @@
* Date: May 20, 2003
*
* Functions:
- * s_vGenerateTxParameter - Generate tx dma requried parameter.
+ * s_vGenerateTxParameter - Generate tx dma required parameter.
* s_vGenerateMACHeader - Translate 802.3 to 802.11 header
* csBeacon_xmit - beacon tx function
* csMgmt_xmit - management tx function
* s_uGetDataDuration - get tx data required duration
* s_uFillDataHead- fulfill tx data duration header
- * s_uGetRTSCTSDuration- get rtx/cts requried duration
+ * s_uGetRTSCTSDuration- get rtx/cts required duration
* s_uGetRTSCTSRsvTime- get rts/cts reserved time
* s_uGetTxRsvTime- get frame reserved time
* s_vFillCTSHead- fulfill CTS ctl header
- * s_vFillFragParameter- Set fragement ctl parameter.
+ * s_vFillFragParameter- Set fragment ctl parameter.
* s_vFillRTSHead- fulfill RTS ctl header
* s_vFillTxKey- fulfill tx encrypt key
* s_vSWencryption- Software encrypt header
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 489b478..3aad333 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -76,7 +76,7 @@
* xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end
* we are going to have to rebuild all this based on an scheduler,
* to where we have a list of transactions to do and based on the
- * availability of the different requried components (blocks,
+ * availability of the different required components (blocks,
* rpipes, segment slots, etc), we go scheduling them. Painful.
*/
#include <linux/init.h>
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 8582e12..b1373ab 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -22,7 +22,7 @@
* overflow.
* Carlos Picoto : PIMv1 Support
* Pavlin Ivanov Radoslavov: PIMv2 Registers must checksum only PIM header
- * Relax this requrement to work with older peers.
+ * Relax this requirement to work with older peers.
*
*/
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 47bdd2f..fa27f3d 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -1,6 +1,6 @@
#!/bin/sh
#
-# Output a simple RPM spec file that uses no fancy features requring
+# Output a simple RPM spec file that uses no fancy features requiring
# RPM v4. This is intended to work with any RPM distro.
#
# The only gothic bit here is redefining install_post to avoid