| /* |
| * Copyright (C) 2007 Google, Inc. |
| * Author: Robert Love <rlove@google.com> |
| * Copyright (c) 2011-2012, The Linux Foundation. All rights reserved. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef __DRIVERS_SERIAL_MSM_SERIAL_H |
| #define __DRIVERS_SERIAL_MSM_SERIAL_H |
| |
| #define UART_MR1 0x0000 |
| |
| #define UART_MR1_AUTO_RFR_LEVEL0 0x3F |
| #define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 |
| #define UART_MR1_RX_RDY_CTL (1 << 7) |
| #define UART_MR1_CTS_CTL (1 << 6) |
| |
| #define UART_MR2 0x0004 |
| #define UART_MR2_ERROR_MODE (1 << 6) |
| #define UART_MR2_BITS_PER_CHAR 0x30 |
| #define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) |
| #define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) |
| #define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) |
| #define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) |
| #define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) |
| #define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) |
| #define UART_MR2_PARITY_MODE_NONE 0x0 |
| #define UART_MR2_PARITY_MODE_ODD 0x1 |
| #define UART_MR2_PARITY_MODE_EVEN 0x2 |
| #define UART_MR2_PARITY_MODE_SPACE 0x3 |
| #define UART_MR2_PARITY_MODE 0x3 |
| |
| #define UART_CSR 0x0008 |
| #define UART_CSR_115200 0xFF |
| #define UART_CSR_57600 0xEE |
| #define UART_CSR_38400 0xDD |
| #define UART_CSR_28800 0xCC |
| #define UART_CSR_19200 0xBB |
| #define UART_CSR_14400 0xAA |
| #define UART_CSR_9600 0x99 |
| #define UART_CSR_7200 0x88 |
| #define UART_CSR_4800 0x77 |
| #define UART_CSR_2400 0x55 |
| #define UART_CSR_1200 0x44 |
| #define UART_CSR_600 0x33 |
| #define UART_CSR_300 0x22 |
| #define UART_CSR_150 0x11 |
| #define UART_CSR_75 0x00 |
| |
| #define UART_TF 0x000C |
| #define UARTDM_TF 0x0070 |
| |
| #define UART_CR 0x0010 |
| #define UART_CR_CMD_NULL (0 << 4) |
| #define UART_CR_CMD_RESET_RX (1 << 4) |
| #define UART_CR_CMD_RESET_TX (2 << 4) |
| #define UART_CR_CMD_RESET_ERR (3 << 4) |
| #define UART_CR_CMD_RESET_BREAK_INT (4 << 4) |
| #define UART_CR_CMD_START_BREAK (5 << 4) |
| #define UART_CR_CMD_STOP_BREAK (6 << 4) |
| #define UART_CR_CMD_RESET_CTS (7 << 4) |
| #define UART_CR_CMD_RESET_STALE_INT (8 << 4) |
| #define UART_CR_CMD_PACKET_MODE (9 << 4) |
| #define UART_CR_CMD_MODE_RESET (12 << 4) |
| #define UART_CR_CMD_SET_RFR (13 << 4) |
| #define UART_CR_CMD_RESET_RFR (14 << 4) |
| #define UART_CR_CMD_PROTECTION_EN (16 << 4) |
| #define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) |
| #define UART_CR_TX_DISABLE (1 << 3) |
| #define UART_CR_TX_ENABLE (1 << 2) |
| #define UART_CR_RX_DISABLE (1 << 1) |
| #define UART_CR_RX_ENABLE (1 << 0) |
| |
| #define UART_IMR 0x0014 |
| #define UART_IMR_TXLEV (1 << 0) |
| #define UART_IMR_RXSTALE (1 << 3) |
| #define UART_IMR_RXLEV (1 << 4) |
| #define UART_IMR_DELTA_CTS (1 << 5) |
| #define UART_IMR_CURRENT_CTS (1 << 6) |
| |
| #define UART_IPR_RXSTALE_LAST 0x20 |
| #define UART_IPR_STALE_LSB 0x1F |
| #define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 |
| |
| #define UART_IPR 0x0018 |
| #define UART_TFWR 0x001C |
| #define UART_RFWR 0x0020 |
| #define UART_HCR 0x0024 |
| |
| #define UART_MREG 0x0028 |
| #define UART_NREG 0x002C |
| #define UART_DREG 0x0030 |
| #define UART_MNDREG 0x0034 |
| #define UART_IRDA 0x0038 |
| |
| #define UART_SIM_CFG 0x003c |
| #define UART_SIM_CFG_UIM_TX_MODE (1 << 17) |
| #define UART_SIM_CFG_UIM_RX_MODE (1 << 16) |
| #define UART_SIM_CFG_STOP_BIT_LEN_N(n) ((n) << 8) |
| #define UART_SIM_CFG_SIM_CLK_ON (1 << 7) |
| #define UART_SIM_CFG_SIM_CLK_TD8_SEL (1 << 6) |
| #define UART_SIM_CFG_SIM_CLK_STOP_HIGH (1 << 5) |
| #define UART_SIM_CFG_MASK_RX (1 << 3) |
| #define UART_SIM_CFG_SIM_SEL (1 << 0) |
| |
| #define UART_MISR_MODE 0x0040 |
| #define UART_MISR_RESET 0x0044 |
| #define UART_MISR_EXPORT 0x0048 |
| #define UART_MISR_VAL 0x004C |
| #define UART_TEST_CTRL 0x0050 |
| |
| #define UART_SR 0x0008 |
| #define UART_SR_HUNT_CHAR (1 << 7) |
| #define UART_SR_RX_BREAK (1 << 6) |
| #define UART_SR_PAR_FRAME_ERR (1 << 5) |
| #define UART_SR_OVERRUN (1 << 4) |
| #define UART_SR_TX_EMPTY (1 << 3) |
| #define UART_SR_TX_READY (1 << 2) |
| #define UART_SR_RX_FULL (1 << 1) |
| #define UART_SR_RX_READY (1 << 0) |
| |
| #define UART_RF 0x000C |
| #define UARTDM_RF 0x0070 |
| #define UART_MISR 0x0010 |
| #define UART_ISR 0x0014 |
| #define UART_ISR_TX_READY (1 << 7) |
| |
| #define GSBI_CONTROL 0x0 |
| #define GSBI_PROTOCOL_CODE 0x30 |
| #define GSBI_PROTOCOL_UART 0x40 |
| #define GSBI_PROTOCOL_IDLE 0x0 |
| |
| #define UARTDM_DMRX 0x34 |
| #define UARTDM_NCF_TX 0x40 |
| #define UARTDM_RX_TOTAL_SNAP 0x38 |
| |
| #endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */ |