diff --git a/Documentation/block/data-integrity.txt b/Documentation/block/data-integrity.txt
index e8ca040..2d735b0 100644
--- a/Documentation/block/data-integrity.txt
+++ b/Documentation/block/data-integrity.txt
@@ -50,7 +50,7 @@
 scatter-gather lists.
 
 The controller will interleave the buffers on write and split them on
-read.  This means that the Linux can DMA the data buffers to and from
+read.  This means that Linux can DMA the data buffers to and from
 host memory without changes to the page cache.
 
 Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@
 
 The IP checksum is weaker than the CRC in terms of detecting bit
 errors.  However, the strength is really in the separation of the data
-buffers and the integrity metadata.  These two distinct buffers much
+buffers and the integrity metadata.  These two distinct buffers must
 match up for an I/O to complete.
 
 The separation of the data and integrity metadata buffers as well as
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index f9ca389..1d7e978 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -777,6 +777,18 @@
 # /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
 # /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
 
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus		-> clear cpus list
+
 2.3 Setting flags
 -----------------
 
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
index e716aad..40ec633 100644
--- a/Documentation/gcov.txt
+++ b/Documentation/gcov.txt
@@ -188,13 +188,18 @@
           GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
           corresponding Makefile.
 
+Problem:  Files copied from sysfs appear empty or incomplete.
+Cause:    Due to the way seq_file works, some tools such as cp or tar
+          may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+          Alternatively use the mechanism shown in Appendix B.
+
 
 Appendix A: gather_on_build.sh
 ==============================
 
 Sample script to gather coverage meta files on the build machine
 (see 6a):
-
 #!/bin/bash
 
 KSRC=$1
@@ -226,7 +231,7 @@
 Sample script to gather coverage data files on the test machine
 (see 6b):
 
-#!/bin/bash
+#!/bin/bash -e
 
 DEST=$1
 GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@
   exit 1
 fi
 
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
 
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to build system and unpack with:"
-  echo "  tar xfz $DEST"
-else
-  echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo "  tar xfz $DEST"
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d08759a..d77fbd8 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1915,6 +1915,12 @@
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+			Allowed values are one of "lpage", "embed" and "4k".
+			See comments in arch/x86/kernel/setup_percpu.c for
+			details on each allocator.  This parameter is primarily
+			for debugging and performance comparison.
+
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2467,7 +2473,8 @@
 
 	tp720=		[HW,PS2]
 
-	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+	trace_buf_size=nn[KMG]
+			[FTRACE] will set tracing buffer size.
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 0112da3..8906803 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -16,13 +16,17 @@
 -----
 
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
+To trigger an intermediate memory scan:
+
+  # echo scan > /sys/kernel/debug/kmemleak
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -31,16 +35,21 @@
 /sys/kernel/debug/kmemleak file. The following parameters are supported:
 
   off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning
+  stack=on	- enable the task stacks scanning (default)
   stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread
+  scan=on	- start the automatic memory scanning thread (default)
   scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds (0
-		  to disable it)
+  scan=<secs>	- set the automatic memory scanning period in seconds
+		  (default 600, 0 to stop the automatic scanning)
+  scan		- trigger a memory scan
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
 
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
 Basic Algorithm
 ---------------
 
diff --git a/Documentation/leds-lp3944.txt b/Documentation/leds-lp3944.txt
new file mode 100644
index 0000000..c6eda18
--- /dev/null
+++ b/Documentation/leds-lp3944.txt
@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+  * National Semiconductor LP3944 Fun-light Chip
+    Prefix: 'lp3944'
+    Addresses scanned: None (see the Notes section below)
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+        Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+  - period: from 0s to 1.6s
+  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+		{
+			I2C_BOARD_INFO("lp3944", 0x60),
+			.platform_data = &a910_lp3944_leds,
+		},
+	};
+
+and register it in the platform init function
+
+	i2c_register_board_info(0, a910_i2c_board_info,
+			ARRAY_SIZE(a910_i2c_board_info));
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 8d999d8..79f533f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1238,1122 +1238,7 @@
 defined; this list will expand as more and more SOC-containing
 platforms are moved over to use the flattened-device-tree model.
 
-   a) PHY nodes
-
-   Required properties:
-
-    - device_type : Should be "ethernet-phy"
-    - interrupts : <a b> where a is the interrupt number and b is a
-      field that represents an encoding of the sense and level
-      information for the interrupt.  This should be encoded based on
-      the information in section 2) depending on the type of interrupt
-      controller you have.
-    - interrupt-parent : the phandle for the interrupt controller that
-      services interrupts for this device.
-    - reg : The ID number for the phy, usually a small integer
-    - linux,phandle :  phandle for this node; likely referenced by an
-      ethernet controller node.
-
-
-   Example:
-
-	ethernet-phy@0 {
-		linux,phandle = <2452000>
-		interrupt-parent = <40000>;
-		interrupts = <35 1>;
-		reg = <0>;
-		device_type = "ethernet-phy";
-	};
-
-
-   b) Interrupt controllers
-
-   Some SOC devices contain interrupt controllers that are different
-   from the standard Open PIC specification.  The SOC device nodes for
-   these types of controllers should be specified just like a standard
-   OpenPIC controller.  Sense and level information should be encoded
-   as specified in section 2) of this chapter for each device that
-   specifies an interrupt.
-
-   Example :
-
-	pic@40000 {
-		linux,phandle = <40000>;
-		interrupt-controller;
-		#address-cells = <0>;
-		reg = <40000 40000>;
-		compatible = "chrp,open-pic";
-		device_type = "open-pic";
-	};
-
-    c) 4xx/Axon EMAC ethernet nodes
-
-    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
-    the Axon bridge.  To operate this needs to interact with a ths
-    special McMAL DMA controller, and sometimes an RGMII or ZMII
-    interface.  In addition to the nodes and properties described
-    below, the node for the OPB bus on which the EMAC sits must have a
-    correct clock-frequency property.
-
-      i) The EMAC node itself
-
-    Required properties:
-    - device_type       : "network"
-
-    - compatible        : compatible list, contains 2 entries, first is
-			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
-			  405gp, Axon) and second is either "ibm,emac" or
-			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
-			  "ibm,emac4"
-    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
-    - interrupt-parent  : optional, if needed for interrupt mapping
-    - reg               : <registers mapping>
-    - local-mac-address : 6 bytes, MAC address
-    - mal-device        : phandle of the associated McMAL node
-    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
-			  with this EMAC
-    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
-			  with this EMAC
-    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
-			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
-			  each Axon chip)
-    - max-frame-size    : 1 cell, maximum frame size supported in bytes
-    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048
-    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
-			  operations.
-			  For Axon, 2048.
-    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
-			  thresholds).
-			  For Axon, 0x00000010
-    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
-			  in bytes.
-			  For Axon, 0x00000100 (I think ...)
-    - phy-mode          : string, mode of operations of the PHY interface.
-			  Supported values are: "mii", "rmii", "smii", "rgmii",
-			  "tbi", "gmii", rtbi", "sgmii".
-			  For Axon on CAB, it is "rgmii"
-    - mdio-device       : 1 cell, required iff using shared MDIO registers
-			  (440EP).  phandle of the EMAC to use to drive the
-			  MDIO lines for the PHY used by this EMAC.
-    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
-			  the ZMII device node
-    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
-			  channel or 0xffffffff if ZMII is only used for MDIO.
-    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
-			  of the RGMII device node.
-			  For Axon: phandle of plb5/plb4/opb/rgmii
-    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
-			  RGMII channel is used by this EMAC.
-			  Fox Axon: present, whatever value is appropriate for each
-			  EMAC, that is the content of the current (bogus) "phy-port"
-			  property.
-
-    Optional properties:
-    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
-			  a search is performed.
-    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
-			  for, used if phy-address is absent. bit 0x00000001 is
-			  MDIO address 0.
-			  For Axon it can be absent, though my current driver
-			  doesn't handle phy-address yet so for now, keep
-			  0x00ffffff in it.
-    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  rx-fifo-size).  For Axon, either absent or 2048.
-    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
-			  operations (if absent the value is the same as
-			  tx-fifo-size). For Axon, either absent or 2048.
-    - tah-device        : 1 cell, optional. If connected to a TAH engine for
-			  offload, phandle of the TAH device node.
-    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
-			  TAH engine.
-
-    Example:
-
-	EMAC0: ethernet@40000800 {
-		device_type = "network";
-		compatible = "ibm,emac-440gp", "ibm,emac";
-		interrupt-parent = <&UIC1>;
-		interrupts = <1c 4 1d 4>;
-		reg = <40000800 70>;
-		local-mac-address = [00 04 AC E3 1B 1E];
-		mal-device = <&MAL0>;
-		mal-tx-channel = <0 1>;
-		mal-rx-channel = <0>;
-		cell-index = <0>;
-		max-frame-size = <5dc>;
-		rx-fifo-size = <1000>;
-		tx-fifo-size = <800>;
-		phy-mode = "rmii";
-		phy-map = <00000001>;
-		zmii-device = <&ZMII0>;
-		zmii-channel = <0>;
-	};
-
-      ii) McMAL node
-
-    Required properties:
-    - device_type        : "dma-controller"
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
-			   emac) and the second is either "ibm,mcmal" or
-			   "ibm,mcmal2".
-			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
-    - interrupts         : <interrupt mapping for the MAL interrupts sources:
-                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
-                           For Axon: This is _different_ from the current
-			   firmware.  We use the "delayed" interrupts for txeob
-			   and rxeob. Thus we end up with mapping those 5 MPIC
-			   interrupts, all level positive sensitive: 10, 11, 32,
-			   33, 34 (in decimal)
-    - dcr-reg            : < DCR registers range >
-    - dcr-parent         : if needed for dcr-reg
-    - num-tx-chans       : 1 cell, number of Tx channels
-    - num-rx-chans       : 1 cell, number of Rx channels
-
-      iii) ZMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,zmii".
-			   For Axon, there is no ZMII node.
-    - reg                : <registers mapping>
-
-      iv) RGMII node
-
-    Required properties:
-    - compatible         : compatible list, containing 2 entries, first is
-			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
-			   EMAC) and the second is "ibm,rgmii".
-                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
-    - reg                : <registers mapping>
-    - revision           : as provided by the RGMII new version register if
-			   available.
-			   For Axon: 0x0000012a
-
-   d) Xilinx IP cores
-
-   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
-   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellaneous
-   devices (gpio, LCD, spi, etc).  Also, since these devices are
-   implemented within the fpga fabric every instance of the device can be
-   synthesised with different options that change the behaviour.
-
-   Each IP-core has a set of parameters which the FPGA designer can use to
-   control how the core is synthesized.  Historically, the EDK tool would
-   extract the device parameters relevant to device drivers and copy them
-   into an 'xparameters.h' in the form of #define symbols.  This tells the
-   device drivers how the IP cores are configured, but it requres the kernel
-   to be recompiled every time the FPGA bitstream is resynthesized.
-
-   The new approach is to export the parameters into the device tree and
-   generate a new device tree each time the FPGA bitstream changes.  The
-   parameters which used to be exported as #defines will now become
-   properties of the device node.  In general, device nodes for IP-cores
-   will take the following form:
-
-	(name): (generic-name)@(base-address) {
-		compatible = "xlnx,(ip-core-name)-(HW_VER)"
-			     [, (list of compatible devices), ...];
-		reg = <(baseaddr) (size)>;
-		interrupt-parent = <&interrupt-controller-phandle>;
-		interrupts = < ... >;
-		xlnx,(parameter1) = "(string-value)";
-		xlnx,(parameter2) = <(int-value)>;
-	};
-
-	(generic-name):   an open firmware-style name that describes the
-			generic class of device.  Preferably, this is one word, such
-			as 'serial' or 'ethernet'.
-	(ip-core-name):	the name of the ip block (given after the BEGIN
-			directive in system.mhs).  Should be in lowercase
-			and all underscores '_' converted to dashes '-'.
-	(name):		is derived from the "PARAMETER INSTANCE" value.
-	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
-			dropped from the parameter name, the name is converted
-			to lowercase and all underscore '_' characters are
-			converted to dashes '-'.
-	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
-	(HW_VER):	from the HW_VER parameter.
-	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
-
-   Typically, the compatible list will include the exact IP core version
-   followed by an older IP core version which implements the same
-   interface or any other device with the same interface.
-
-   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
-
-   For example, the following block from system.mhs:
-
-	BEGIN opb_uartlite
-		PARAMETER INSTANCE = opb_uartlite_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BAUDRATE = 115200
-		PARAMETER C_DATA_BITS = 8
-		PARAMETER C_ODD_PARITY = 0
-		PARAMETER C_USE_PARITY = 0
-		PARAMETER C_CLK_FREQ = 50000000
-		PARAMETER C_BASEADDR = 0xEC100000
-		PARAMETER C_HIGHADDR = 0xEC10FFFF
-		BUS_INTERFACE SOPB = opb_7
-		PORT OPB_Clk = CLK_50MHz
-		PORT Interrupt = opb_uartlite_0_Interrupt
-		PORT RX = opb_uartlite_0_RX
-		PORT TX = opb_uartlite_0_TX
-		PORT OPB_Rst = sys_bus_reset_0
-	END
-
-   becomes the following device tree node:
-
-	opb_uartlite_0: serial@ec100000 {
-		device_type = "serial";
-		compatible = "xlnx,opb-uartlite-1.00.b";
-		reg = <ec100000 10000>;
-		interrupt-parent = <&opb_intc_0>;
-		interrupts = <1 0>; // got this from the opb_intc parameters
-		current-speed = <d#115200>;	// standard serial device prop
-		clock-frequency = <d#50000000>;	// standard serial device prop
-		xlnx,data-bits = <8>;
-		xlnx,odd-parity = <0>;
-		xlnx,use-parity = <0>;
-	};
-
-   Some IP cores actually implement 2 or more logical devices.  In
-   this case, the device should still describe the whole IP core with
-   a single node and add a child node for each logical device.  The
-   ranges property can be used to translate from parent IP-core to the
-   registers of each device.  In addition, the parent node should be
-   compatible with the bus type 'xlnx,compound', and should contain
-   #address-cells and #size-cells, as with any other bus.  (Note: this
-   makes the assumption that both logical devices have the same bus
-   binding.  If this is not true, then separate nodes should be used
-   for each logical device).  The 'cell-index' property can be used to
-   enumerate logical devices within an IP core.  For example, the
-   following is the system.mhs entry for the dual ps2 controller found
-   on the ml403 reference design.
-
-	BEGIN opb_ps2_dual_ref
-		PARAMETER INSTANCE = opb_ps2_dual_ref_0
-		PARAMETER HW_VER = 1.00.a
-		PARAMETER C_BASEADDR = 0xA9000000
-		PARAMETER C_HIGHADDR = 0xA9001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-		PORT Sys_Intr1 = ps2_1_intr
-		PORT Sys_Intr2 = ps2_2_intr
-		PORT Clkin1 = ps2_clk_rx_1
-		PORT Clkin2 = ps2_clk_rx_2
-		PORT Clkpd1 = ps2_clk_tx_1
-		PORT Clkpd2 = ps2_clk_tx_2
-		PORT Rx1 = ps2_d_rx_1
-		PORT Rx2 = ps2_d_rx_2
-		PORT Txpd1 = ps2_d_tx_1
-		PORT Txpd2 = ps2_d_tx_2
-	END
-
-   It would result in the following device tree nodes:
-
-	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,compound";
-		ranges = <0 a9000000 2000>;
-		// If this device had extra parameters, then they would
-		// go here.
-		ps2@0 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <0 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-		ps2@1000 {
-			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
-			reg = <1000 40>;
-			interrupt-parent = <&opb_intc_0>;
-			interrupts = <3 0>;
-			cell-index = <0>;
-		};
-	};
-
-   Also, the system.mhs file defines bus attachments from the processor
-   to the devices.  The device tree structure should reflect the bus
-   attachments.  Again an example; this system.mhs fragment:
-
-	BEGIN ppc405_virtex4
-		PARAMETER INSTANCE = ppc405_0
-		PARAMETER HW_VER = 1.01.a
-		BUS_INTERFACE DPLB = plb_v34_0
-		BUS_INTERFACE IPLB = plb_v34_0
-	END
-
-	BEGIN opb_intc
-		PARAMETER INSTANCE = opb_intc_0
-		PARAMETER HW_VER = 1.00.c
-		PARAMETER C_BASEADDR = 0xD1000FC0
-		PARAMETER C_HIGHADDR = 0xD1000FDF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN opb_uart16550
-		PARAMETER INSTANCE = opb_uart16550_0
-		PARAMETER HW_VER = 1.00.d
-		PARAMETER C_BASEADDR = 0xa0000000
-		PARAMETER C_HIGHADDR = 0xa0001FFF
-		BUS_INTERFACE SOPB = opb_v20_0
-	END
-
-	BEGIN plb_v34
-		PARAMETER INSTANCE = plb_v34_0
-		PARAMETER HW_VER = 1.02.a
-	END
-
-	BEGIN plb_bram_if_cntlr
-		PARAMETER INSTANCE = plb_bram_if_cntlr_0
-		PARAMETER HW_VER = 1.00.b
-		PARAMETER C_BASEADDR = 0xFFFF0000
-		PARAMETER C_HIGHADDR = 0xFFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-	END
-
-	BEGIN plb2opb_bridge
-		PARAMETER INSTANCE = plb2opb_bridge_0
-		PARAMETER HW_VER = 1.01.a
-		PARAMETER C_RNG0_BASEADDR = 0x20000000
-		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
-		PARAMETER C_RNG1_BASEADDR = 0x60000000
-		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
-		PARAMETER C_RNG2_BASEADDR = 0x80000000
-		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
-		PARAMETER C_RNG3_BASEADDR = 0xC0000000
-		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
-		BUS_INTERFACE SPLB = plb_v34_0
-		BUS_INTERFACE MOPB = opb_v20_0
-	END
-
-   Gives this device tree (some properties removed for clarity):
-
-	plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v34-1.02.a";
-		device_type = "ibm,plb";
-		ranges; // 1:1 translation
-
-		plb_bram_if_cntrl_0: bram@ffff0000 {
-			reg = <ffff0000 10000>;
-		}
-
-		opb@20000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <20000000 20000000 20000000
-				  60000000 60000000 20000000
-				  80000000 80000000 40000000
-				  c0000000 c0000000 20000000>;
-
-			opb_uart16550_0: serial@a0000000 {
-				reg = <a00000000 2000>;
-			};
-
-			opb_intc_0: interrupt-controller@d1000fc0 {
-				reg = <d1000fc0 20>;
-			};
-		};
-	};
-
-   That covers the general approach to binding xilinx IP cores into the
-   device tree.  The following are bindings for specific devices:
-
-      i) Xilinx ML300 Framebuffer
-
-      Simple framebuffer device from the ML300 reference design (also on the
-      ML403 reference design as well as others).
-
-      Optional properties:
-       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
-                                    implementations use a different resolution.
-                                    Default is <d#640 d#480>
-       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
-                                           Default is <d#1024 d#480>.
-       - rotate-display (empty) : rotate display 180 degrees.
-
-      ii) Xilinx SystemACE
-
-      The Xilinx SystemACE device is used to program FPGAs from an FPGA
-      bitstream stored on a CF card.  It can also be used as a generic CF
-      interface device.
-
-      Optional properties:
-       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
-
-      iii) Xilinx EMAC and Xilinx TEMAC
-
-      Xilinx Ethernet devices.  In addition to general xilinx properties
-      listed above, nodes for these devices should include a phy-handle
-      property, and may include other common network device properties
-      like local-mac-address.
-
-      iv) Xilinx Uartlite
-
-      Xilinx uartlite devices are simple fixed speed serial ports.
-
-      Required properties:
-       - current-speed : Baud rate of uartlite
-
-      v) Xilinx hwicap
-
-		Xilinx hwicap devices provide access to the configuration logic
-		of the FPGA through the Internal Configuration Access Port
-		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
-		readback of the configuration information, and some control over
-		'warm boots' of the FPGA fabric.
-
-		Required properties:
-		- xlnx,family : The family of the FPGA, necessary since the
-                      capabilities of the underlying ICAP hardware
-                      differ between different families.  May be
-                      'virtex2p', 'virtex4', or 'virtex5'.
-
-      vi) Xilinx Uart 16550
-
-      Xilinx UART 16550 devices are very similar to the NS16550 but with
-      different register spacing and an offset from the base address.
-
-      Required properties:
-       - clock-frequency : Frequency of the clock input
-       - reg-offset : A value of 3 is required
-       - reg-shift : A value of 2 is required
-
-    e) USB EHCI controllers
-
-    Required properties:
-      - compatible : should be "usb-ehci".
-      - reg : should contain at least address and length of the standard EHCI
-        register set for the device. Optional platform-dependent registers
-        (debug-port or other) can be also specified here, but only after
-        definition of standard EHCI registers.
-      - interrupts : one EHCI interrupt should be described here.
-    If device registers are implemented in big endian mode, the device
-    node should have "big-endian-regs" property.
-    If controller implementation operates with big endian descriptors,
-    "big-endian-desc" property should be specified.
-    If both big endian registers and descriptors are used by the controller
-    implementation, "big-endian" property can be specified instead of having
-    both "big-endian-regs" and "big-endian-desc".
-
-     Example (Sequoia 440EPx):
-	    ehci@e0000300 {
-		   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
-		   interrupt-parent = <&UIC0>;
-		   interrupts = <1a 4>;
-		   reg = <0 e0000300 90 0 e0000390 70>;
-		   big-endian;
-	   };
-
-   f) MDIO on GPIOs
-
-   Currently defined compatibles:
-   - virtual,gpio-mdio
-
-   MDC and MDIO lines connected to GPIO controllers are listed in the
-   gpios property as described in section VIII.1 in the following order:
-
-   MDC, MDIO.
-
-   Example:
-
-	mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpios = <&qe_pio_a 11
-			 &qe_pio_c 6>;
-	};
-
-    g) SPI (Serial Peripheral Interface) busses
-
-    SPI busses can be described with a node for the SPI master device
-    and a set of child nodes for each SPI slave on the bus.  For this
-    discussion, it is assumed that the system's SPI controller is in
-    SPI master mode.  This binding does not describe SPI controllers
-    in slave mode.
-
-    The SPI master node requires the following properties:
-    - #address-cells  - number of cells required to define a chip select
-			address on the SPI bus.
-    - #size-cells     - should be zero.
-    - compatible      - name of SPI bus controller following generic names
-			recommended practice.
-    No other properties are required in the SPI bus node.  It is assumed
-    that a driver for an SPI bus device will understand that it is an SPI bus.
-    However, the binding does not attempt to define the specific method for
-    assigning chip select numbers.  Since SPI chip select configuration is
-    flexible and non-standardized, it is left out of this binding with the
-    assumption that board specific platform code will be used to manage
-    chip selects.  Individual drivers can define additional properties to
-    support describing the chip select layout.
-
-    SPI slave nodes must be children of the SPI master node and can
-    contain the following properties.
-    - reg             - (required) chip select address of device.
-    - compatible      - (required) name of SPI device following generic names
-			recommended practice
-    - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
-    - spi-cpol        - (optional) Empty property indicating device requires
-			inverse clock polarity (CPOL) mode
-    - spi-cpha        - (optional) Empty property indicating device requires
-			shifted clock phase (CPHA) mode
-    - spi-cs-high     - (optional) Empty property indicating device requires
-			chip select active high
-
-    SPI example for an MPC5200 SPI bus:
-		spi@f00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-			interrupt-parent = <&mpc5200_pic>;
-
-			ethernet-switch@0 {
-				compatible = "micrel,ks8995m";
-				spi-max-frequency = <1000000>;
-				reg = <0>;
-			};
-
-			codec@1 {
-				compatible = "ti,tlv320aic26";
-				spi-max-frequency = <100000>;
-				reg = <1>;
-			};
-		};
-
-VII - Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system.  In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains.  Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
-  This node is used to represent the system-controller and must be
-  present when the system uses a system controller chip. The top-level
-  system-controller node contains information that is global to all
-  devices within the system controller chip. The node name begins
-  with "system-controller" followed by the unit address, which is
-  the base address of the memory-mapped register set for the system
-  controller chip.
-
-  Required properties:
-
-    - ranges : Describes the translation of system controller addresses
-      for memory mapped registers.
-    - clock-frequency: Contains the main clock frequency for the system
-      controller chip.
-    - reg : This property defines the address and size of the
-      memory-mapped registers contained within the system controller
-      chip.  The address specified in the "reg" property should match
-      the unit address of the system-controller node.
-    - #address-cells : Address representation for system controller
-      devices.  This field represents the number of cells needed to
-      represent the address of the memory-mapped registers of devices
-      within the system controller chip.
-    - #size-cells : Size representation for for the memory-mapped
-      registers within the system controller chip.
-    - #interrupt-cells : Defines the width of cells used to represent
-      interrupts.
-
-  Optional properties:
-
-    - model : The specific model of the system controller chip.  Such
-      as, "mv64360", "mv64460", or "mv64560".
-    - compatible : A string identifying the compatibility identifiers
-      of the system controller chip.
-
-  The system-controller node contains child nodes for each system
-  controller device that the platform uses.  Nodes should not be created
-  for devices which exist on the system controller chip but are not used
-
-  Example Marvell Discovery mv64360 system-controller node:
-
-    system-controller@f1000000 { /* Marvell Discovery mv64360 */
-	    #address-cells = <1>;
-	    #size-cells = <1>;
-	    model = "mv64360";                      /* Default */
-	    compatible = "marvell,mv64360";
-	    clock-frequency = <133333333>;
-	    reg = <0xf1000000 0x10000>;
-	    virtual-reg = <0xf1000000>;
-	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-	    [ child node definitions... ]
-    }
-
-2) Child nodes of /system-controller
-
-   a) Marvell Discovery MDIO bus
-
-   The MDIO is a bus to which the PHY devices are connected.  For each
-   device that exists on this bus, a child node should be created.  See
-   the definition of the PHY node below for an example of how to define
-   a PHY.
-
-   Required properties:
-     - #address-cells : Should be <1>
-     - #size-cells : Should be <0>
-     - device_type : Should be "mdio"
-     - compatible : Should be "marvell,mv64360-mdio"
-
-   Example:
-
-     mdio {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     device_type = "mdio";
-	     compatible = "marvell,mv64360-mdio";
-
-	     ethernet-phy@0 {
-		     ......
-	     };
-     };
-
-
-   b) Marvell Discovery ethernet controller
-
-   The Discover ethernet controller is described with two levels
-   of nodes.  The first level describes an ethernet silicon block
-   and the second level describes up to 3 ethernet nodes within
-   that block.  The reason for the multiple levels is that the
-   registers for the node are interleaved within a single set
-   of registers.  The "ethernet-block" level describes the
-   shared register set, and the "ethernet" nodes describe ethernet
-   port-specific properties.
-
-   Ethernet block node
-
-   Required properties:
-     - #address-cells : <1>
-     - #size-cells : <0>
-     - compatible : "marvell,mv64360-eth-block"
-     - reg : Offset and length of the register set for this block
-
-   Example Discovery Ethernet block node:
-     ethernet-block@2000 {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     compatible = "marvell,mv64360-eth-block";
-	     reg = <0x2000 0x2000>;
-	     ethernet@0 {
-		     .......
-	     };
-     };
-
-   Ethernet port node
-
-   Required properties:
-     - device_type : Should be "network".
-     - compatible : Should be "marvell,mv64360-eth".
-     - reg : Should be <0>, <1>, or <2>, according to which registers
-       within the silicon block the device uses.
-     - interrupts : <a> where a is the interrupt number for the port.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-     - phy : the phandle for the PHY connected to this ethernet
-       controller.
-     - local-mac-address : 6 bytes, MAC address
-
-   Example Discovery Ethernet port node:
-     ethernet@0 {
-	     device_type = "network";
-	     compatible = "marvell,mv64360-eth";
-	     reg = <0>;
-	     interrupts = <32>;
-	     interrupt-parent = <&PIC>;
-	     phy = <&PHY0>;
-	     local-mac-address = [ 00 00 00 00 00 00 ];
-     };
-
-
-
-   c) Marvell Discovery PHY nodes
-
-   Required properties:
-     - device_type : Should be "ethernet-phy"
-     - interrupts : <a> where a is the interrupt number for this phy.
-     - interrupt-parent : the phandle for the interrupt controller that
-       services interrupts for this device.
-     - reg : The ID number for the phy, usually a small integer
-
-   Example Discovery PHY node:
-     ethernet-phy@1 {
-	     device_type = "ethernet-phy";
-	     compatible = "broadcom,bcm5421";
-	     interrupts = <76>;      /* GPP 12 */
-	     interrupt-parent = <&PIC>;
-	     reg = <1>;
-     };
-
-
-   d) Marvell Discovery SDMA nodes
-
-   Represent DMA hardware associated with the MPSC (multiprotocol
-   serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-sdma"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the DMA
-       device.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SDMA node:
-     sdma@4000 {
-	     compatible = "marvell,mv64360-sdma";
-	     reg = <0x4000 0xc18>;
-	     virtual-reg = <0xf1004000>;
-	     interrupts = <36>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   e) Marvell Discovery BRG nodes
-
-   Represent baud rate generator hardware associated with the MPSC
-   (multiprotocol serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-brg"
-     - reg : Offset and length of the register set for this device
-     - clock-src : A value from 0 to 15 which selects the clock
-       source for the baud rate generator.  This value corresponds
-       to the CLKS value in the BRGx configuration register.  See
-       the mv64x60 User's Manual.
-     - clock-frequence : The frequency (in Hz) of the baud rate
-       generator's input clock.
-     - current-speed : The current speed setting (presumably by
-       firmware) of the baud rate generator.
-
-   Example Discovery BRG node:
-     brg@b200 {
-	     compatible = "marvell,mv64360-brg";
-	     reg = <0xb200 0x8>;
-	     clock-src = <8>;
-	     clock-frequency = <133333333>;
-	     current-speed = <9600>;
-     };
-
-
-   f) Marvell Discovery CUNIT nodes
-
-   Represent the Serial Communications Unit device hardware.
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     cunit@f200 {
-	     reg = <0xf200 0x200>;
-     };
-
-
-   g) Marvell Discovery MPSCROUTING nodes
-
-   Represent the Discovery's MPSC routing hardware
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     mpscrouting@b500 {
-	     reg = <0xb400 0xc>;
-     };
-
-
-   h) Marvell Discovery MPSCINTR nodes
-
-   Represent the Discovery's MPSC DMA interrupt hardware registers
-   (SDMA cause and mask registers).
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPSCINTR node:
-     mpsintr@b800 {
-	     reg = <0xb800 0x100>;
-     };
-
-
-   i) Marvell Discovery MPSC nodes
-
-   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
-   serial port.
-
-   Required properties:
-     - device_type : "serial"
-     - compatible : "marvell,mv64360-mpsc"
-     - reg : Offset and length of the register set for this device
-     - sdma : the phandle for the SDMA node used by this port
-     - brg : the phandle for the BRG node used by this port
-     - cunit : the phandle for the CUNIT node used by this port
-     - mpscrouting : the phandle for the MPSCROUTING node used by this port
-     - mpscintr : the phandle for the MPSCINTR node used by this port
-     - cell-index : the hardware index of this cell in the MPSC core
-     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
-       register
-     - interrupts : <a> where a is the interrupt number for the MPSC.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery MPSCINTR node:
-     mpsc@8000 {
-	     device_type = "serial";
-	     compatible = "marvell,mv64360-mpsc";
-	     reg = <0x8000 0x38>;
-	     virtual-reg = <0xf1008000>;
-	     sdma = <&SDMA0>;
-	     brg = <&BRG0>;
-	     cunit = <&CUNIT>;
-	     mpscrouting = <&MPSCROUTING>;
-	     mpscintr = <&MPSCINTR>;
-	     cell-index = <0>;
-	     max_idle = <40>;
-	     interrupts = <40>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   j) Marvell Discovery Watch Dog Timer nodes
-
-   Represent the Discovery's watchdog timer hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-wdt"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery Watch Dog Timer node:
-     wdt@b410 {
-	     compatible = "marvell,mv64360-wdt";
-	     reg = <0xb410 0x8>;
-     };
-
-
-   k) Marvell Discovery I2C nodes
-
-   Represent the Discovery's I2C hardware
-
-   Required properties:
-     - device_type : "i2c"
-     - compatible : "marvell,mv64360-i2c"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the I2C.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery I2C node:
-	     compatible = "marvell,mv64360-i2c";
-	     reg = <0xc000 0x20>;
-	     virtual-reg = <0xf100c000>;
-	     interrupts = <37>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
-   Represent the Discovery's PIC hardware
-
-   Required properties:
-     - #interrupt-cells : <1>
-     - #address-cells : <0>
-     - compatible : "marvell,mv64360-pic"
-     - reg : Offset and length of the register set for this device
-     - interrupt-controller
-
-   Example Discovery PIC node:
-     pic {
-	     #interrupt-cells = <1>;
-	     #address-cells = <0>;
-	     compatible = "marvell,mv64360-pic";
-	     reg = <0x0 0x88>;
-	     interrupt-controller;
-     };
-
-
-   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
-   Represent the Discovery's MPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-mpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPP node:
-     mpp@f000 {
-	     compatible = "marvell,mv64360-mpp";
-	     reg = <0xf000 0x10>;
-     };
-
-
-   n) Marvell Discovery GPP (General Purpose Pins) nodes
-
-   Represent the Discovery's GPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-gpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery GPP node:
-     gpp@f000 {
-	     compatible = "marvell,mv64360-gpp";
-	     reg = <0xf100 0x20>;
-     };
-
-
-   o) Marvell Discovery PCI host bridge node
-
-   Represents the Discovery's PCI host bridge device.  The properties
-   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
-   1275-1994.  A typical value for the compatible property is
-   "marvell,mv64360-pci".
-
-   Example Discovery PCI host bridge node
-     pci@80000000 {
-	     #address-cells = <3>;
-	     #size-cells = <2>;
-	     #interrupt-cells = <1>;
-	     device_type = "pci";
-	     compatible = "marvell,mv64360-pci";
-	     reg = <0xcf8 0x8>;
-	     ranges = <0x01000000 0x0        0x0
-			     0x88000000 0x0 0x01000000
-		       0x02000000 0x0 0x80000000
-			     0x80000000 0x0 0x08000000>;
-	     bus-range = <0 255>;
-	     clock-frequency = <66000000>;
-	     interrupt-parent = <&PIC>;
-	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	     interrupt-map = <
-		     /* IDSEL 0x0a */
-		     0x5000 0 0 1 &PIC 80
-		     0x5000 0 0 2 &PIC 81
-		     0x5000 0 0 3 &PIC 91
-		     0x5000 0 0 4 &PIC 93
-
-		     /* IDSEL 0x0b */
-		     0x5800 0 0 1 &PIC 91
-		     0x5800 0 0 2 &PIC 93
-		     0x5800 0 0 3 &PIC 80
-		     0x5800 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0c */
-		     0x6000 0 0 1 &PIC 91
-		     0x6000 0 0 2 &PIC 93
-		     0x6000 0 0 3 &PIC 80
-		     0x6000 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0d */
-		     0x6800 0 0 1 &PIC 93
-		     0x6800 0 0 2 &PIC 80
-		     0x6800 0 0 3 &PIC 81
-		     0x6800 0 0 4 &PIC 91
-	     >;
-     };
-
-
-   p) Marvell Discovery CPU Error nodes
-
-   Represent the Discovery's CPU error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-cpu-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery CPU Error node:
-     cpu-error@0070 {
-	     compatible = "marvell,mv64360-cpu-error";
-	     reg = <0x70 0x10 0x128 0x28>;
-	     interrupts = <3>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   q) Marvell Discovery SRAM Controller nodes
-
-   Represent the Discovery's SRAM controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-sram-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SRAM Controller node:
-     sram-ctrl@0380 {
-	     compatible = "marvell,mv64360-sram-ctrl";
-	     reg = <0x380 0x80>;
-	     interrupts = <13>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   r) Marvell Discovery PCI Error Handler nodes
-
-   Represent the Discovery's PCI error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-pci-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery PCI Error Handler node:
-     pci-error@1d40 {
-	     compatible = "marvell,mv64360-pci-error";
-	     reg = <0x1d40 0x40 0xc28 0x4>;
-	     interrupts = <12>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   s) Marvell Discovery Memory Controller nodes
-
-   Represent the Discovery's memory controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-mem-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery Memory Controller node:
-     mem-ctrl@1400 {
-	     compatible = "marvell,mv64360-mem-ctrl";
-	     reg = <0x1400 0x60>;
-	     interrupts = <17>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-VIII - Specifying interrupt information for devices
+VII - Specifying interrupt information for devices
 ===================================================
 
 The device tree represents the busses and devices of a hardware
@@ -2439,56 +1324,7 @@
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-IX - Specifying GPIO information for devices
-============================================
-
-1) gpios property
------------------
-
-Nodes that makes use of GPIOs should define them using `gpios' property,
-format of which is: <&gpio-controller1-phandle gpio1-specifier
-		     &gpio-controller2-phandle gpio2-specifier
-		     0 /* holes are permitted, means no GPIO 3 */
-		     &gpio-controller4-phandle gpio4-specifier
-		     ...>;
-
-Note that gpio-specifier length is controller dependent.
-
-gpio-specifier may encode: bank, pin position inside the bank,
-whether pin is open-drain and whether pin is logically inverted.
-
-Example of the node using GPIOs:
-
-	node {
-		gpios = <&qe_pio_e 18 0>;
-	};
-
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
-
-2) gpio-controller nodes
-------------------------
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-
-Example of two SOC GPIO banks defined as gpio-controller nodes:
-
-	qe_pio_a: gpio-controller@1400 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
-		reg = <0x1400 0x18>;
-		gpio-controller;
-	};
-
-	qe_pio_e: gpio-controller@1460 {
-		#gpio-cells = <2>;
-		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
-		reg = <0x1460 0x18>;
-		gpio-controller;
-	};
-
-X - Specifying Device Power Management Information (sleep property)
+VIII - Specifying Device Power Management Information (sleep property)
 ===================================================================
 
 Devices on SOCs often have mechanisms for placing devices into low-power
diff --git a/Documentation/powerpc/dts-bindings/4xx/emac.txt b/Documentation/powerpc/dts-bindings/4xx/emac.txt
new file mode 100644
index 0000000..2161334
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/emac.txt
@@ -0,0 +1,148 @@
+    4xx/Axon EMAC ethernet nodes
+
+    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+    the Axon bridge.  To operate this needs to interact with a ths
+    special McMAL DMA controller, and sometimes an RGMII or ZMII
+    interface.  In addition to the nodes and properties described
+    below, the node for the OPB bus on which the EMAC sits must have a
+    correct clock-frequency property.
+
+      i) The EMAC node itself
+
+    Required properties:
+    - device_type       : "network"
+
+    - compatible        : compatible list, contains 2 entries, first is
+			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+			  405gp, Axon) and second is either "ibm,emac" or
+			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
+			  "ibm,emac4"
+    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
+    - interrupt-parent  : optional, if needed for interrupt mapping
+    - reg               : <registers mapping>
+    - local-mac-address : 6 bytes, MAC address
+    - mal-device        : phandle of the associated McMAL node
+    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
+			  with this EMAC
+    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
+			  with this EMAC
+    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
+			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+			  each Axon chip)
+    - max-frame-size    : 1 cell, maximum frame size supported in bytes
+    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048
+    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048.
+    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
+			  thresholds).
+			  For Axon, 0x00000010
+    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
+			  in bytes.
+			  For Axon, 0x00000100 (I think ...)
+    - phy-mode          : string, mode of operations of the PHY interface.
+			  Supported values are: "mii", "rmii", "smii", "rgmii",
+			  "tbi", "gmii", rtbi", "sgmii".
+			  For Axon on CAB, it is "rgmii"
+    - mdio-device       : 1 cell, required iff using shared MDIO registers
+			  (440EP).  phandle of the EMAC to use to drive the
+			  MDIO lines for the PHY used by this EMAC.
+    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
+			  the ZMII device node
+    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
+			  channel or 0xffffffff if ZMII is only used for MDIO.
+    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
+			  of the RGMII device node.
+			  For Axon: phandle of plb5/plb4/opb/rgmii
+    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
+			  RGMII channel is used by this EMAC.
+			  Fox Axon: present, whatever value is appropriate for each
+			  EMAC, that is the content of the current (bogus) "phy-port"
+			  property.
+
+    Optional properties:
+    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+			  a search is performed.
+    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
+			  for, used if phy-address is absent. bit 0x00000001 is
+			  MDIO address 0.
+			  For Axon it can be absent, though my current driver
+			  doesn't handle phy-address yet so for now, keep
+			  0x00ffffff in it.
+    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  rx-fifo-size).  For Axon, either absent or 2048.
+    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  tx-fifo-size). For Axon, either absent or 2048.
+    - tah-device        : 1 cell, optional. If connected to a TAH engine for
+			  offload, phandle of the TAH device node.
+    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
+			  TAH engine.
+
+    Example:
+
+	EMAC0: ethernet@40000800 {
+		device_type = "network";
+		compatible = "ibm,emac-440gp", "ibm,emac";
+		interrupt-parent = <&UIC1>;
+		interrupts = <1c 4 1d 4>;
+		reg = <40000800 70>;
+		local-mac-address = [00 04 AC E3 1B 1E];
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0 1>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <5dc>;
+		rx-fifo-size = <1000>;
+		tx-fifo-size = <800>;
+		phy-mode = "rmii";
+		phy-map = <00000001>;
+		zmii-device = <&ZMII0>;
+		zmii-channel = <0>;
+	};
+
+      ii) McMAL node
+
+    Required properties:
+    - device_type        : "dma-controller"
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+			   emac) and the second is either "ibm,mcmal" or
+			   "ibm,mcmal2".
+			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+    - interrupts         : <interrupt mapping for the MAL interrupts sources:
+                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+                           For Axon: This is _different_ from the current
+			   firmware.  We use the "delayed" interrupts for txeob
+			   and rxeob. Thus we end up with mapping those 5 MPIC
+			   interrupts, all level positive sensitive: 10, 11, 32,
+			   33, 34 (in decimal)
+    - dcr-reg            : < DCR registers range >
+    - dcr-parent         : if needed for dcr-reg
+    - num-tx-chans       : 1 cell, number of Tx channels
+    - num-rx-chans       : 1 cell, number of Rx channels
+
+      iii) ZMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,zmii".
+			   For Axon, there is no ZMII node.
+    - reg                : <registers mapping>
+
+      iv) RGMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,rgmii".
+                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
+    - reg                : <registers mapping>
+    - revision           : as provided by the RGMII new version register if
+			   available.
+			   For Axon: 0x0000012a
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/gpio.txt b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
new file mode 100644
index 0000000..edaa84d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/gpio.txt
@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+		     &gpio-controller2-phandle gpio2-specifier
+		     0 /* holes are permitted, means no GPIO 3 */
+		     &gpio-controller4-phandle gpio4-specifier
+		     ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+	node {
+		gpios = <&qe_pio_e 18 0>;
+	};
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	};
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	};
+
+
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt
index 4fe14de..064db92 100644
--- a/Documentation/powerpc/dts-bindings/gpio/led.txt
+++ b/Documentation/powerpc/dts-bindings/gpio/led.txt
@@ -16,10 +16,17 @@
   string defining the trigger assigned to the LED.  Current triggers are:
     "backlight" - LED will act as a back-light, controlled by the framebuffer
 		  system
-    "default-on" - LED will turn on
+    "default-on" - LED will turn on, but see "default-state" below
     "heartbeat" - LED "double" flashes at a load average based rate
     "ide-disk" - LED indicates disk activity
     "timer" - LED flashes at a fixed, configurable rate
+- default-state:  (optional) The initial state of the LED.  Valid
+  values are "on", "off", and "keep".  If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on).  The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
 
 Examples:
 
@@ -30,14 +37,22 @@
 		gpios = <&mcu_pio 0 1>; /* Active low */
 		linux,default-trigger = "ide-disk";
 	};
+
+	fault {
+		gpios = <&mcu_pio 1 0>;
+		/* Keep LED on if BIOS detected hardware fault */
+		default-state = "keep";
+	};
 };
 
 run-control {
 	compatible = "gpio-leds";
 	red {
 		gpios = <&mpc8572 6 0>;
+		default-state = "off";
 	};
 	green {
 		gpios = <&mpc8572 7 0>;
+		default-state = "on";
 	};
 }
diff --git a/Documentation/powerpc/dts-bindings/gpio/mdio.txt b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
new file mode 100644
index 0000000..bc95495
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/gpio/mdio.txt
@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+	compatible = "virtual,mdio-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&qe_pio_a 11
+		 &qe_pio_c 6>;
+};
diff --git a/Documentation/powerpc/dts-bindings/marvell.txt b/Documentation/powerpc/dts-bindings/marvell.txt
new file mode 100644
index 0000000..3708a2f
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/marvell.txt
@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system.  In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains.  Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+  This node is used to represent the system-controller and must be
+  present when the system uses a system controller chip. The top-level
+  system-controller node contains information that is global to all
+  devices within the system controller chip. The node name begins
+  with "system-controller" followed by the unit address, which is
+  the base address of the memory-mapped register set for the system
+  controller chip.
+
+  Required properties:
+
+    - ranges : Describes the translation of system controller addresses
+      for memory mapped registers.
+    - clock-frequency: Contains the main clock frequency for the system
+      controller chip.
+    - reg : This property defines the address and size of the
+      memory-mapped registers contained within the system controller
+      chip.  The address specified in the "reg" property should match
+      the unit address of the system-controller node.
+    - #address-cells : Address representation for system controller
+      devices.  This field represents the number of cells needed to
+      represent the address of the memory-mapped registers of devices
+      within the system controller chip.
+    - #size-cells : Size representation for for the memory-mapped
+      registers within the system controller chip.
+    - #interrupt-cells : Defines the width of cells used to represent
+      interrupts.
+
+  Optional properties:
+
+    - model : The specific model of the system controller chip.  Such
+      as, "mv64360", "mv64460", or "mv64560".
+    - compatible : A string identifying the compatibility identifiers
+      of the system controller chip.
+
+  The system-controller node contains child nodes for each system
+  controller device that the platform uses.  Nodes should not be created
+  for devices which exist on the system controller chip but are not used
+
+  Example Marvell Discovery mv64360 system-controller node:
+
+    system-controller@f1000000 { /* Marvell Discovery mv64360 */
+	    #address-cells = <1>;
+	    #size-cells = <1>;
+	    model = "mv64360";                      /* Default */
+	    compatible = "marvell,mv64360";
+	    clock-frequency = <133333333>;
+	    reg = <0xf1000000 0x10000>;
+	    virtual-reg = <0xf1000000>;
+	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+	    [ child node definitions... ]
+    }
+
+2) Child nodes of /system-controller
+
+   a) Marvell Discovery MDIO bus
+
+   The MDIO is a bus to which the PHY devices are connected.  For each
+   device that exists on this bus, a child node should be created.  See
+   the definition of the PHY node below for an example of how to define
+   a PHY.
+
+   Required properties:
+     - #address-cells : Should be <1>
+     - #size-cells : Should be <0>
+     - device_type : Should be "mdio"
+     - compatible : Should be "marvell,mv64360-mdio"
+
+   Example:
+
+     mdio {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     device_type = "mdio";
+	     compatible = "marvell,mv64360-mdio";
+
+	     ethernet-phy@0 {
+		     ......
+	     };
+     };
+
+
+   b) Marvell Discovery ethernet controller
+
+   The Discover ethernet controller is described with two levels
+   of nodes.  The first level describes an ethernet silicon block
+   and the second level describes up to 3 ethernet nodes within
+   that block.  The reason for the multiple levels is that the
+   registers for the node are interleaved within a single set
+   of registers.  The "ethernet-block" level describes the
+   shared register set, and the "ethernet" nodes describe ethernet
+   port-specific properties.
+
+   Ethernet block node
+
+   Required properties:
+     - #address-cells : <1>
+     - #size-cells : <0>
+     - compatible : "marvell,mv64360-eth-block"
+     - reg : Offset and length of the register set for this block
+
+   Example Discovery Ethernet block node:
+     ethernet-block@2000 {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     compatible = "marvell,mv64360-eth-block";
+	     reg = <0x2000 0x2000>;
+	     ethernet@0 {
+		     .......
+	     };
+     };
+
+   Ethernet port node
+
+   Required properties:
+     - device_type : Should be "network".
+     - compatible : Should be "marvell,mv64360-eth".
+     - reg : Should be <0>, <1>, or <2>, according to which registers
+       within the silicon block the device uses.
+     - interrupts : <a> where a is the interrupt number for the port.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+     - phy : the phandle for the PHY connected to this ethernet
+       controller.
+     - local-mac-address : 6 bytes, MAC address
+
+   Example Discovery Ethernet port node:
+     ethernet@0 {
+	     device_type = "network";
+	     compatible = "marvell,mv64360-eth";
+	     reg = <0>;
+	     interrupts = <32>;
+	     interrupt-parent = <&PIC>;
+	     phy = <&PHY0>;
+	     local-mac-address = [ 00 00 00 00 00 00 ];
+     };
+
+
+
+   c) Marvell Discovery PHY nodes
+
+   Required properties:
+     - device_type : Should be "ethernet-phy"
+     - interrupts : <a> where a is the interrupt number for this phy.
+     - interrupt-parent : the phandle for the interrupt controller that
+       services interrupts for this device.
+     - reg : The ID number for the phy, usually a small integer
+
+   Example Discovery PHY node:
+     ethernet-phy@1 {
+	     device_type = "ethernet-phy";
+	     compatible = "broadcom,bcm5421";
+	     interrupts = <76>;      /* GPP 12 */
+	     interrupt-parent = <&PIC>;
+	     reg = <1>;
+     };
+
+
+   d) Marvell Discovery SDMA nodes
+
+   Represent DMA hardware associated with the MPSC (multiprotocol
+   serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-sdma"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the DMA
+       device.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SDMA node:
+     sdma@4000 {
+	     compatible = "marvell,mv64360-sdma";
+	     reg = <0x4000 0xc18>;
+	     virtual-reg = <0xf1004000>;
+	     interrupts = <36>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   e) Marvell Discovery BRG nodes
+
+   Represent baud rate generator hardware associated with the MPSC
+   (multiprotocol serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-brg"
+     - reg : Offset and length of the register set for this device
+     - clock-src : A value from 0 to 15 which selects the clock
+       source for the baud rate generator.  This value corresponds
+       to the CLKS value in the BRGx configuration register.  See
+       the mv64x60 User's Manual.
+     - clock-frequence : The frequency (in Hz) of the baud rate
+       generator's input clock.
+     - current-speed : The current speed setting (presumably by
+       firmware) of the baud rate generator.
+
+   Example Discovery BRG node:
+     brg@b200 {
+	     compatible = "marvell,mv64360-brg";
+	     reg = <0xb200 0x8>;
+	     clock-src = <8>;
+	     clock-frequency = <133333333>;
+	     current-speed = <9600>;
+     };
+
+
+   f) Marvell Discovery CUNIT nodes
+
+   Represent the Serial Communications Unit device hardware.
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     cunit@f200 {
+	     reg = <0xf200 0x200>;
+     };
+
+
+   g) Marvell Discovery MPSCROUTING nodes
+
+   Represent the Discovery's MPSC routing hardware
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     mpscrouting@b500 {
+	     reg = <0xb400 0xc>;
+     };
+
+
+   h) Marvell Discovery MPSCINTR nodes
+
+   Represent the Discovery's MPSC DMA interrupt hardware registers
+   (SDMA cause and mask registers).
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPSCINTR node:
+     mpsintr@b800 {
+	     reg = <0xb800 0x100>;
+     };
+
+
+   i) Marvell Discovery MPSC nodes
+
+   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+   serial port.
+
+   Required properties:
+     - device_type : "serial"
+     - compatible : "marvell,mv64360-mpsc"
+     - reg : Offset and length of the register set for this device
+     - sdma : the phandle for the SDMA node used by this port
+     - brg : the phandle for the BRG node used by this port
+     - cunit : the phandle for the CUNIT node used by this port
+     - mpscrouting : the phandle for the MPSCROUTING node used by this port
+     - mpscintr : the phandle for the MPSCINTR node used by this port
+     - cell-index : the hardware index of this cell in the MPSC core
+     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+       register
+     - interrupts : <a> where a is the interrupt number for the MPSC.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery MPSCINTR node:
+     mpsc@8000 {
+	     device_type = "serial";
+	     compatible = "marvell,mv64360-mpsc";
+	     reg = <0x8000 0x38>;
+	     virtual-reg = <0xf1008000>;
+	     sdma = <&SDMA0>;
+	     brg = <&BRG0>;
+	     cunit = <&CUNIT>;
+	     mpscrouting = <&MPSCROUTING>;
+	     mpscintr = <&MPSCINTR>;
+	     cell-index = <0>;
+	     max_idle = <40>;
+	     interrupts = <40>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   j) Marvell Discovery Watch Dog Timer nodes
+
+   Represent the Discovery's watchdog timer hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-wdt"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery Watch Dog Timer node:
+     wdt@b410 {
+	     compatible = "marvell,mv64360-wdt";
+	     reg = <0xb410 0x8>;
+     };
+
+
+   k) Marvell Discovery I2C nodes
+
+   Represent the Discovery's I2C hardware
+
+   Required properties:
+     - device_type : "i2c"
+     - compatible : "marvell,mv64360-i2c"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the I2C.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery I2C node:
+	     compatible = "marvell,mv64360-i2c";
+	     reg = <0xc000 0x20>;
+	     virtual-reg = <0xf100c000>;
+	     interrupts = <37>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+   Represent the Discovery's PIC hardware
+
+   Required properties:
+     - #interrupt-cells : <1>
+     - #address-cells : <0>
+     - compatible : "marvell,mv64360-pic"
+     - reg : Offset and length of the register set for this device
+     - interrupt-controller
+
+   Example Discovery PIC node:
+     pic {
+	     #interrupt-cells = <1>;
+	     #address-cells = <0>;
+	     compatible = "marvell,mv64360-pic";
+	     reg = <0x0 0x88>;
+	     interrupt-controller;
+     };
+
+
+   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+   Represent the Discovery's MPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-mpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPP node:
+     mpp@f000 {
+	     compatible = "marvell,mv64360-mpp";
+	     reg = <0xf000 0x10>;
+     };
+
+
+   n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+   Represent the Discovery's GPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-gpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery GPP node:
+     gpp@f000 {
+	     compatible = "marvell,mv64360-gpp";
+	     reg = <0xf100 0x20>;
+     };
+
+
+   o) Marvell Discovery PCI host bridge node
+
+   Represents the Discovery's PCI host bridge device.  The properties
+   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+   1275-1994.  A typical value for the compatible property is
+   "marvell,mv64360-pci".
+
+   Example Discovery PCI host bridge node
+     pci@80000000 {
+	     #address-cells = <3>;
+	     #size-cells = <2>;
+	     #interrupt-cells = <1>;
+	     device_type = "pci";
+	     compatible = "marvell,mv64360-pci";
+	     reg = <0xcf8 0x8>;
+	     ranges = <0x01000000 0x0        0x0
+			     0x88000000 0x0 0x01000000
+		       0x02000000 0x0 0x80000000
+			     0x80000000 0x0 0x08000000>;
+	     bus-range = <0 255>;
+	     clock-frequency = <66000000>;
+	     interrupt-parent = <&PIC>;
+	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	     interrupt-map = <
+		     /* IDSEL 0x0a */
+		     0x5000 0 0 1 &PIC 80
+		     0x5000 0 0 2 &PIC 81
+		     0x5000 0 0 3 &PIC 91
+		     0x5000 0 0 4 &PIC 93
+
+		     /* IDSEL 0x0b */
+		     0x5800 0 0 1 &PIC 91
+		     0x5800 0 0 2 &PIC 93
+		     0x5800 0 0 3 &PIC 80
+		     0x5800 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0c */
+		     0x6000 0 0 1 &PIC 91
+		     0x6000 0 0 2 &PIC 93
+		     0x6000 0 0 3 &PIC 80
+		     0x6000 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0d */
+		     0x6800 0 0 1 &PIC 93
+		     0x6800 0 0 2 &PIC 80
+		     0x6800 0 0 3 &PIC 81
+		     0x6800 0 0 4 &PIC 91
+	     >;
+     };
+
+
+   p) Marvell Discovery CPU Error nodes
+
+   Represent the Discovery's CPU error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-cpu-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery CPU Error node:
+     cpu-error@0070 {
+	     compatible = "marvell,mv64360-cpu-error";
+	     reg = <0x70 0x10 0x128 0x28>;
+	     interrupts = <3>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   q) Marvell Discovery SRAM Controller nodes
+
+   Represent the Discovery's SRAM controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-sram-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SRAM Controller node:
+     sram-ctrl@0380 {
+	     compatible = "marvell,mv64360-sram-ctrl";
+	     reg = <0x380 0x80>;
+	     interrupts = <13>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   r) Marvell Discovery PCI Error Handler nodes
+
+   Represent the Discovery's PCI error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-pci-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery PCI Error Handler node:
+     pci-error@1d40 {
+	     compatible = "marvell,mv64360-pci-error";
+	     reg = <0x1d40 0x40 0xc28 0x4>;
+	     interrupts = <12>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   s) Marvell Discovery Memory Controller nodes
+
+   Represent the Discovery's memory controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-mem-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery Memory Controller node:
+     mem-ctrl@1400 {
+	     compatible = "marvell,mv64360-mem-ctrl";
+	     reg = <0x1400 0x60>;
+	     interrupts = <17>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
diff --git a/Documentation/powerpc/dts-bindings/phy.txt b/Documentation/powerpc/dts-bindings/phy.txt
new file mode 100644
index 0000000..bb8c742
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/phy.txt
@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle :  phandle for this node; likely referenced by an
+   ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+	linux,phandle = <2452000>
+	interrupt-parent = <40000>;
+	interrupts = <35 1>;
+	reg = <0>;
+	device_type = "ethernet-phy";
+};
diff --git a/Documentation/powerpc/dts-bindings/spi-bus.txt b/Documentation/powerpc/dts-bindings/spi-bus.txt
new file mode 100644
index 0000000..e782add
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/spi-bus.txt
@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus.  For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode.  This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells  - number of cells required to define a chip select
+    		address on the SPI bus.
+- #size-cells     - should be zero.
+- compatible      - name of SPI bus controller following generic names
+    		recommended practice.
+No other properties are required in the SPI bus node.  It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers.  Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects.  Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg             - (required) chip select address of device.
+- compatible      - (required) name of SPI device following generic names
+    		recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol        - (optional) Empty property indicating device requires
+    		inverse clock polarity (CPOL) mode
+- spi-cpha        - (optional) Empty property indicating device requires
+    		shifted clock phase (CPHA) mode
+- spi-cs-high     - (optional) Empty property indicating device requires
+    		chip select active high
+
+SPI example for an MPC5200 SPI bus:
+	spi@f00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+		reg = <0xf00 0x20>;
+		interrupts = <2 13 0 2 14 0>;
+		interrupt-parent = <&mpc5200_pic>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995m";
+			spi-max-frequency = <1000000>;
+			reg = <0>;
+		};
+
+		codec@1 {
+			compatible = "ti,tlv320aic26";
+			spi-max-frequency = <100000>;
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/powerpc/dts-bindings/usb-ehci.txt b/Documentation/powerpc/dts-bindings/usb-ehci.txt
new file mode 100644
index 0000000..fa18612
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/usb-ehci.txt
@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+  - compatible : should be "usb-ehci".
+  - reg : should contain at least address and length of the standard EHCI
+    register set for the device. Optional platform-dependent registers
+    (debug-port or other) can be also specified here, but only after
+    definition of standard EHCI registers.
+  - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+    ehci@e0000300 {
+	   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+	   interrupt-parent = <&UIC0>;
+	   interrupts = <1a 4>;
+	   reg = <0 e0000300 90 0 e0000390 70>;
+	   big-endian;
+   };
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
new file mode 100644
index 0000000..80339fe
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -0,0 +1,295 @@
+   d) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellaneous
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requres the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name): (generic-name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(generic-name):   an open firmware-style name that describes the
+			generic class of device.  Preferably, this is one word, such
+			as 'serial' or 'ethernet'.
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
+	(HW_VER):	from the HW_VER parameter.
+	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb_uartlite_0: serial@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb_intc_0>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   Some IP cores actually implement 2 or more logical devices.  In
+   this case, the device should still describe the whole IP core with
+   a single node and add a child node for each logical device.  The
+   ranges property can be used to translate from parent IP-core to the
+   registers of each device.  In addition, the parent node should be
+   compatible with the bus type 'xlnx,compound', and should contain
+   #address-cells and #size-cells, as with any other bus.  (Note: this
+   makes the assumption that both logical devices have the same bus
+   binding.  If this is not true, then separate nodes should be used
+   for each logical device).  The 'cell-index' property can be used to
+   enumerate logical devices within an IP core.  For example, the
+   following is the system.mhs entry for the dual ps2 controller found
+   on the ml403 reference design.
+
+	BEGIN opb_ps2_dual_ref
+		PARAMETER INSTANCE = opb_ps2_dual_ref_0
+		PARAMETER HW_VER = 1.00.a
+		PARAMETER C_BASEADDR = 0xA9000000
+		PARAMETER C_HIGHADDR = 0xA9001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+		PORT Sys_Intr1 = ps2_1_intr
+		PORT Sys_Intr2 = ps2_2_intr
+		PORT Clkin1 = ps2_clk_rx_1
+		PORT Clkin2 = ps2_clk_rx_2
+		PORT Clkpd1 = ps2_clk_tx_1
+		PORT Clkpd2 = ps2_clk_tx_2
+		PORT Rx1 = ps2_d_rx_1
+		PORT Rx2 = ps2_d_rx_2
+		PORT Txpd1 = ps2_d_tx_1
+		PORT Txpd2 = ps2_d_tx_2
+	END
+
+   It would result in the following device tree nodes:
+
+	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,compound";
+		ranges = <0 a9000000 2000>;
+		// If this device had extra parameters, then they would
+		// go here.
+		ps2@0 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <0 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+		ps2@1000 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <1000 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+	};
+
+   Also, the system.mhs file defines bus attachments from the processor
+   to the devices.  The device tree structure should reflect the bus
+   attachments.  Again an example; this system.mhs fragment:
+
+	BEGIN ppc405_virtex4
+		PARAMETER INSTANCE = ppc405_0
+		PARAMETER HW_VER = 1.01.a
+		BUS_INTERFACE DPLB = plb_v34_0
+		BUS_INTERFACE IPLB = plb_v34_0
+	END
+
+	BEGIN opb_intc
+		PARAMETER INSTANCE = opb_intc_0
+		PARAMETER HW_VER = 1.00.c
+		PARAMETER C_BASEADDR = 0xD1000FC0
+		PARAMETER C_HIGHADDR = 0xD1000FDF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN opb_uart16550
+		PARAMETER INSTANCE = opb_uart16550_0
+		PARAMETER HW_VER = 1.00.d
+		PARAMETER C_BASEADDR = 0xa0000000
+		PARAMETER C_HIGHADDR = 0xa0001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN plb_v34
+		PARAMETER INSTANCE = plb_v34_0
+		PARAMETER HW_VER = 1.02.a
+	END
+
+	BEGIN plb_bram_if_cntlr
+		PARAMETER INSTANCE = plb_bram_if_cntlr_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BASEADDR = 0xFFFF0000
+		PARAMETER C_HIGHADDR = 0xFFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+	END
+
+	BEGIN plb2opb_bridge
+		PARAMETER INSTANCE = plb2opb_bridge_0
+		PARAMETER HW_VER = 1.01.a
+		PARAMETER C_RNG0_BASEADDR = 0x20000000
+		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+		PARAMETER C_RNG1_BASEADDR = 0x60000000
+		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+		PARAMETER C_RNG2_BASEADDR = 0x80000000
+		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+		PARAMETER C_RNG3_BASEADDR = 0xC0000000
+		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+		BUS_INTERFACE MOPB = opb_v20_0
+	END
+
+   Gives this device tree (some properties removed for clarity):
+
+	plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v34-1.02.a";
+		device_type = "ibm,plb";
+		ranges; // 1:1 translation
+
+		plb_bram_if_cntrl_0: bram@ffff0000 {
+			reg = <ffff0000 10000>;
+		}
+
+		opb@20000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <20000000 20000000 20000000
+				  60000000 60000000 20000000
+				  80000000 80000000 40000000
+				  c0000000 c0000000 20000000>;
+
+			opb_uart16550_0: serial@a0000000 {
+				reg = <a00000000 2000>;
+			};
+
+			opb_intc_0: interrupt-controller@d1000fc0 {
+				reg = <d1000fc0 20>;
+			};
+		};
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Required properties:
+       - current-speed : Baud rate of uartlite
+
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
+      vi) Xilinx Uart 16550
+
+      Xilinx UART 16550 devices are very similar to the NS16550 but with
+      different register spacing and an offset from the base address.
+
+      Required properties:
+       - clock-frequency : Frequency of the clock input
+       - reg-offset : A value of 3 is required
+       - reg-shift : A value of 2 is required
+
+
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0d8d235..939a3dd 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -240,6 +240,7 @@
   laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
   ultra		2-channel with EAPD (Samsung Ultra tablet PC)
   samsung	2-channel with EAPD (Samsung R65)
+  samsung-p50	2-channel with HP-automute (Samsung P50)
 
 AD1988/AD1988B/AD1989A/AD1989B
 ==============================
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index cf0e3ce0..c1a5aad 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -99,11 +99,13 @@
 			{ "lsb",     0, 0, 'L' },
 			{ "cs-high", 0, 0, 'C' },
 			{ "3wire",   0, 0, '3' },
+			{ "no-cs",   0, 0, 'N' },
+			{ "ready",   0, 0, 'R' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -139,6 +141,12 @@
 		case '3':
 			mode |= SPI_3WIRE;
 			break;
+		case 'N':
+			mode |= SPI_NO_CS;
+			break;
+		case 'R':
+			mode |= SPI_READY;
+			break;
 		default:
 			print_usage(argv[0]);
 			break;
diff --git a/MAINTAINERS b/MAINTAINERS
index fa2a16d..381190c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -867,12 +867,22 @@
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
+ARM/SAMSUNG ARM ARCHITECTURES
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-s3c24xx/
+
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2410/
 
 ARM/S3C2440 ARM ARCHITECTURE
 P:	Ben Dooks
@@ -880,6 +890,39 @@
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
+F:	arch/arm/mach-s3c2440/
+
+ARM/S3C2442 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2442/
+
+ARM/S3C2443 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c2443/
+
+ARM/S3C6400 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6400/
+
+ARM/S3C6410 ARM ARCHITECTURE
+P:	Ben Dooks
+M:	ben-linux@fluff.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.fluff.org/ben/linux/
+S:	Maintained
+F:	arch/arm/mach-s3c6410/
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 P:	Lennert Buytenhek
@@ -2087,9 +2130,9 @@
 
 EDAC-I82975X
 P:	Ranganathan Desikan
-M:	rdesikan@jetzbroadband.com
+M:	ravi@jetztechnologies.com
 P:	Arvind R.
-M:	arvind@acarlab.com
+M:	arvind@jetztechnologies.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
@@ -2808,7 +2851,9 @@
 
 IA64 (Itanium) PLATFORM
 P:	Tony Luck
+P:	Fenghua Yu
 M:	tony.luck@intel.com
+M:	fenghua.yu@intel.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2886,7 +2931,7 @@
 M:	dbaryshkov@gmail.com
 P:	Sergey Lapin
 M:	slapin@ossfans.org
-L:	linux-zigbee-devel@lists.sourceforge.net
+L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
@@ -5533,8 +5578,8 @@
 
 STARFIRE/DURALAN NETWORK DRIVER
 P:	Ion Badulescu
-M:	ionut@cs.columbia.edu
-S:	Maintained
+M:	ionut@badula.org
+S:	Odd Fixes
 F:	drivers/net/starfire*
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
@@ -5668,6 +5713,13 @@
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
+TI TWL4030 SERIES SOC CODEC DRIVER
+P:	Peter Ujfalusi
+M:	peter.ujfalusi@nokia.com
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	sound/soc/codecs/twl4030*
+
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a..b663f1f 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd94..a89e473 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8f..b498104 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
@@ -2298,7 +2299,6 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50..3286060 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98..9d32fae 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1..9c746af 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600..b7c3490 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3..6937102 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270be..a55398e 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a4..f6b5672 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c..ed2a48a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
@@ -205,9 +204,11 @@
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c..6810b4a 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86..9a0bf67 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9..54fec53 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e..a98201c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5..6f71f37 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a87..1541fd4 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@
 static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
 	int ret = 0;
-	struct twl_mmc_controller *c = &hsmmc[1];
+	struct twl_mmc_controller *c = NULL;
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
 
 	/* If we don't see a Vcc regulator, assume it's a fixed
 	 * voltage always-on regulator.
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc30..ec71a69 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
 #include <plat/mci.h>
 #include <plat/udc.h>
 
-#include <plat/regs-serial.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
@@ -275,6 +273,7 @@
 		.nr_chips	= 1,
 		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
 		.partitions	= mini2440_default_nand_part,
+		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
 	},
 };
 
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581..0fb385b 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@
 		 */
 		.name		= "neo1973-nand",
 		.nr_chips	= 1,
-		.use_bbt	= 1,
-		.force_soft_ecc	= 1,
+		.flash_bbt	= 1,
 	},
 };
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec..7677a4a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
+	/* Enable smartidle idlemodes and autoidle */
+	if (cpu_is_omap34xx()) {
+		u32 v = dma_read(OCP_SYSCONFIG);
+		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+				DMA_SYSCONFIG_SIDLEMODE_MASK |
+				DMA_SYSCONFIG_AUTOIDLE);
+		v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_AUTOIDLE);
+		dma_write(v , OCP_SYSCONFIG);
+	}
+
+
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
 		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba..26b387c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4e..285eaa3 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
 struct omap_chip_id {
 	u8 oc;
 	u8 type;
@@ -424,17 +435,6 @@
 
 
 int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
 void omap2_check_revision(void);
 
 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae8..7b939cc 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
 #define DMA_THREAD_FIFO_25		(0x02 << 14)
 #define DMA_THREAD_FIFO_50		(0x03 << 14)
 
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
+#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE			0x2
+#define DMA_IDLEMODE_NO_IDLE			0x1
+#define DMA_IDLEMODE_FORCE_IDLE			0x0
+
 /* Chaining modes*/
 #ifndef CONFIG_ARCH_OMAP1
 #define OMAP_DMA_STATIC_CHAIN		0x1
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b28147..73f483d 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
 #define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
 
 #ifdef __ASSEMBLER__
-#define IOMEM(x)		x
+#define IOMEM(x)		(x)
 #else
 #define IOMEM(x)		((void __force __iomem *)(x))
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449f..4a03013 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df..4ea7380 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@
 			if (cpu_is_omap34xx()) {
 				omap_sram_base = OMAP3_SRAM_PUB_VA;
 				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+					omap_sram_size = 0x7000; /* 28K */
+				} else {
+					omap_sram_size = 0x8000; /* 32K */
+				}
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb..0761766 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d..2e17082 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12..579a165 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf789..da7a617 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc..86b9edc 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5..4a8fb42 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
 #define __NR_inotify_init1	332
 #define __NR_preadv		333
 #define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_counter_open	336
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 335
+#define NR_syscalls 337
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e3..fde1e44 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_counter_open
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e98..d5764a3 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@
 	}
 
 	if (!esi)
-		return -ENODEV;;
+		return -ENODEV;
 
 	systab = __va(esi);
 
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce246..f178270 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@
  * /proc/perfmon interface, for debug only
  */
 
-#define PFM_PROC_SHOW_HEADER	((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER	((void *)(long)nr_cpu_ids+1)
 
 static void *
 pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55..e6676fc 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@
 static void
 salinfo_work_to_do(struct salinfo_data *data)
 {
-	down_trylock(&data->mutex);
+	(void)(down_trylock(&data->mutex) ?: 0);
 	up(&data->mutex);
 }
 
diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb61..f1268b8 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
  *
  */
 #undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
 #include "../../../lib/vsprintf.c"
 #include "../../../lib/ctype.c"
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da..bb862fb 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@
 	if (vdcr & IA64_DCR_PP) {
 		vpsr |= IA64_PSR_PP;
 	} else {
-		vpsr &= ~IA64_PSR_PP;;
+		vpsr &= ~IA64_PSR_PP;
 	}
 
 	vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 		break;
 	case PAL_BRAND_INFO:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
 		break;
 	default:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 	}
 	p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15..46b02cb 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@
 	 * Now look at registers in [0-31] range and init correct UNAT
 	 */
 	addr = (unsigned long)regs;
-	unat = &regs->eml_unat;;
+	unat = &regs->eml_unat;
 
 	addr += gr_info[regnum];
 
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a42..20b3852 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@
 	u64 rid;
 
 	rid = vcpu_get_rr(vcpu, va);
-	rid = rid & RR_RID_MASK;;
+	rid = rid & RR_RID_MASK;
 	if (type == D_TLB) {
 		if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
 			for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@
 
 	struct thash_cb *hcb = &v->arch.vtlb;
 
-	cch = __vtr_lookup(v, va, is_data);;
+	cch = __vtr_lookup(v, va, is_data);
 	if (cch)
 		return cch;
 
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf..25831c4 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@
 	bricktype = MODULE_GET_BTYPE(moduleid);
 	if ((bricktype == L1_BRICKTYPE_191010) ||
 	    (bricktype == L1_BRICKTYPE_1932))
-			sprintf(address, "%s^%d", address, geo_slot(geoid));
+			sprintf(address + strlen(address), "^%d",
+						geo_slot(geoid));
 }
 
 void __devinit
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b43..fad6861 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
 #define __NR_inotify_init1	333
 #define __NR_preadv		334
 #define __NR_pwritev		335
+#define __NR_rt_tgsigqueueinfo	336
+#define __NR_perf_counter_open	337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 326
+#define NR_syscalls 338
 
 /*
  * specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27..e0d2563 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 335 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedf..d00131c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@
 
 config TRACE_IRQFLAGS_SUPPORT
 	bool
-	depends on PPC64
 	default y
 
 config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd..3d80c3e 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@
 zconf.h
 zlib.h
 zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fc..49ac36b 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
 			devsel-speed = <0x00000001>;
 			min-grant = <0>;
 			max-latency = <0>;
-			/* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
-			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
 			interrupt-parent = <&i8259>;
 			#interrupt-cells = <2>;
 			#address-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb01..a680165 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
 			status = "disabled";
+			sdhci,1-bit-only;
 		};
 
 		crypto@30000 {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff7987..7685ffd 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
 
-#define IMAP_ADDR		(get_immrbase())
-
 #define CPM_PIN_INPUT     0
 #define CPM_PIN_OUTPUT    1
 #define CPM_PIN_PRIMARY   0
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887..b44aaab 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
 					   size, direction);
 }
 
@@ -320,7 +322,9 @@
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle,
 					      0, size, direction);
 }
 
@@ -331,7 +335,9 @@
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_cpu)
+		dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_device)
+		dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle,
 					   offset, size, direction);
 }
 
@@ -362,7 +372,9 @@
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
 					      size, direction);
 }
 #else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f..a74c4ee 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
 
 #ifdef __KERNEL__
 
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/highmem.h>
 #include <asm/kmap_types.h>
 #include <asm/tlbflush.h>
 #include <asm/page.h>
@@ -62,6 +60,9 @@
 
 extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+			      pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
 
 static inline void *kmap(struct page *page)
 {
@@ -79,62 +80,11 @@
 	kunmap_high(page);
 }
 
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
-	unsigned int idx;
-	unsigned long vaddr;
-
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	debug_kmap_atomic(type);
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
-	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
-	local_flush_tlb_page(NULL, vaddr);
-
-	return (void*) vaddr;
-}
-
 static inline void *kmap_atomic(struct page *page, enum km_type type)
 {
 	return kmap_atomic_prot(page, type, kmap_prot);
 }
 
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		return;
-	}
-
-	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-	/*
-	 * force other mappings to Oops if they'll try to access
-	 * this pte without first remap it
-	 */
-	pte_clear(&init_mm, vaddr, kmap_pte-idx);
-	local_flush_tlb_page(NULL, vaddr);
-#endif
-	pagefault_enable();
-}
-
 static inline struct page *kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@
 	return pte_page(*pte);
 }
 
+
 #define flush_cache_kmaps()	flush_cache_all()
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8e..8b505ea 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@
 
 #if defined(CONFIG_BOOKE)
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
 #else
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	mtmsr(flags)
+#define raw_local_irq_restore(flags)	mtmsr(flags)
 #endif
 
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@
 #endif
 }
 
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@
 #endif
 }
 
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
 {
 	unsigned long msr;
 	msr = mfmsr();
@@ -110,12 +110,12 @@
 #endif
 }
 
-#define local_save_flags(flags)	((flags) = mfmsr())
-#define local_irq_save(flags)	local_irq_save_ptr(&flags)
-#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags)	((flags) = mfmsr())
+#define raw_local_irq_save(flags)	raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags)	(((flags) & MSR_EE) == 0)
 
-#define hard_irq_enable()	local_irq_enable()
-#define hard_irq_disable()	local_irq_disable()
+#define hard_irq_disable()		raw_local_irq_disable()
 
 static inline int irqs_disabled_flags(unsigned long flags)
 {
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e1..0ea0639 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@
 extern unsigned long perf_misc_flags(struct pt_regs *regs);
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
 
+#define PERF_COUNTER_INDEX_OFFSET	1
+
 /*
  * Only override the default definitions in include/linux/perf_counter.h
  * if we have hardware PMU support.
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26f..82b72207 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
  * generic accessors and iterators here
  */
 #define __real_pte(e,p) 	((real_pte_t) { \
-	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+			(e), ((e) & _PAGE_COMBO) ? \
+				(pte_val(*((p) + PTRS_PER_PTE))) : 0 })
 #define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
         (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
 #define __rpte_to_pte(r)	((r).pte)
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c1233..168fce7 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@
 	unsigned long entry;		/* physical address pointer */
 	unsigned long base;		/* physical address pointer */
 	unsigned long size;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct rtas_args args;
 	struct device_node *dev;	/* virtual address pointer */
 };
@@ -245,5 +245,8 @@
 			(devfn << 8) | (reg & 0xff);
 }
 
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f1..3cadba6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	lis	r12,reenable_mmu@h
+	ori	r12,r12,reenable_mmu@l
+	mtspr	SPRN_SRR0,r12
+	mtspr	SPRN_SRR1,r10
+	SYNC
+	RFI
+reenable_mmu:				/* re-enable mmu so we can */
+	mfmsr	r10
+	lwz	r12,_MSR(r1)
+	xor	r10,r10,r12
+	andi.	r10,r10,MSR_EE		/* Did EE change? */
+	beq	1f
+
+	/* Save handler and return address into the 2 unused words
+	 * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+	 * else can be recovered from the pt_regs except r3 which for
+	 * normal interrupts has been set to pt_regs and for syscalls
+	 * is an argument, so we temporarily use ORIG_GPR3 to save it
+	 */
+	stw	r9,8(r1)
+	stw	r11,12(r1)
+	stw	r3,ORIG_GPR3(r1)
+	bl	trace_hardirqs_off
+	lwz	r0,GPR0(r1)
+	lwz	r3,ORIG_GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	lwz	r9,8(r1)
+	lwz	r11,12(r1)
+1:	mtctr	r11
+	mtlr	r9
+	bctr				/* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
 	SYNC
 	RFI				/* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
 
 #if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@
 #ifdef SHOW_SYSCALLS
 	bl	do_show_syscall
 #endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Return from syscalls can (and generally will) hard enable
+	 * interrupts. You aren't supposed to call a syscall with
+	 * interrupts disabled in the first place. However, to ensure
+	 * that we get it right vs. lockdep if it happens, we force
+	 * that hard enable here with appropriate tracing if we see
+	 * that we have been called with interrupts off
+	 */
+	mfmsr	r11
+	andi.	r12,r11,MSR_EE
+	bne+	1f
+	/* We came in with interrupts disabled, we enable them now */
+	bl	trace_hardirqs_on
+	mfmsr	r11
+	lwz	r0,GPR0(r1)
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	ori	r11,r11,MSR_EE
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	mtmsr	r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	lwz	r11,TI_FLAGS(r10)
 	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@
 	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	/* disable interrupts so current_thread_info()->flags can't change */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	/* Note: We don't bother telling lockdep about it */
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@
 	oris	r11,r11,0x1000	/* Set SO bit in CR */
 	stw	r11,_CCR(r1)
 syscall_exit_cont:
+	lwz	r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* If we are going to return from the syscall with interrupts
+	 * off, we trace that here. It shouldn't happen though but we
+	 * want to catch the bugger if it does right ?
+	 */
+	andi.	r10,r8,MSR_EE
+	bne+	1f
+	stw	r3,GPR3(r1)
+	bl      trace_hardirqs_off
+	lwz	r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@
 	mtlr	r4
 	mtcr	r5
 	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
 	FIX_SRR1(r8, r0)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
@@ -394,7 +470,9 @@
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 	beq	ret_from_except
 
-	/* Re-enable interrupts */
+	/* Re-enable interrupts. There is no need to trace that with
+	 * lockdep as we are supposed to have IRQs on at this point
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)
@@ -705,6 +783,7 @@
 	/* Hard-disable interrupts so that current_thread_info()->flags
 	 * can't change between when we test it and when we return
 	 * from the interrupt. */
+	/* Note: We don't bother telling lockdep about it */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC			/* Some chip revs have problems here... */
 	MTMSRD(r10)		/* disable interrupts */
@@ -744,11 +823,24 @@
 	beq+	restore
 	andi.	r0,r3,MSR_EE	/* interrupts off? */
 	beq	restore		/* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep thinks irqs are enabled, we need to call
+	 * preempt_schedule_irq with IRQs off, so we inform lockdep
+	 * now that we -did- turn them off already
+	 */
+	bl	trace_hardirqs_off
+#endif
 1:	bl	preempt_schedule_irq
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r3,TI_FLAGS(r9)
 	andi.	r0,r3,_TIF_NEED_RESCHED
 	bne-	1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* And now, to properly rebalance the above, we tell lockdep they
+	 * are being turned back on, which will happen when we return
+	 */
+	bl	trace_hardirqs_on
+#endif
 #else
 resume_kernel:
 #endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@
 	stw	r6,icache_44x_need_flush@l(r4)
 1:
 #endif  /* CONFIG_44x */
+
+	lwz	r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep doesn't know about the fact that IRQs are temporarily turned
+	 * off in this assembly code while peeking at TI_FLAGS() and such. However
+	 * we need to inform it if the exception turned interrupts off, and we
+	 * are about to trun them back on.
+	 *
+	 * The problem here sadly is that we don't know whether the exceptions was
+	 * one that turned interrupts off or not. So we always tell lockdep about
+	 * turning them on here when we go back to wherever we came from with EE
+	 * on, even if that may meen some redudant calls being tracked. Maybe later
+	 * we could encode what the exception did somewhere or test the exception
+	 * type in the pt_regs but that sounds overkill
+	 */
+	andi.	r10,r9,MSR_EE
+	beq	1f
+	bl	trace_hardirqs_on
+	lwz	r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@
 	stwcx.	r0,0,r1			/* to clear the reservation */
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
 	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
 	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
 
@@ -805,7 +918,6 @@
 	MTMSRD(r10)		/* clear the RI bit */
 	.globl exc_exit_restart
 exc_exit_restart:
-	lwz	r9,_MSR(r1)
 	lwz	r12,_NIP(r1)
 	FIX_SRR1(r9,r10)
 	mtspr	SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@
 	beq	do_user_signal
 
 do_resched:			/* r10 contains MSR_KERNEL here */
+	/* Note: We don't need to inform lockdep that we are enabling
+	 * interrupts here. As far as it knows, they are already enabled
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)		/* hard-enable interrupts */
 	bl	schedule
 recheck:
+	/* Note: And we don't tell it we are disabling them again
+	 * neither. Those disable/enable cycles used to peek at
+	 * TI_FLAGS aren't advertised.
+	 */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC
 	MTMSRD(r10)		/* disable interrupts */
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 4846946..fc21329 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@
 	RFI
 
 /*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET.  From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
  */
 initial_bats:
 	lis	r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@
 	bne	4f
 	ori	r11,r11,4		/* set up BAT registers for 601 */
 	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
 	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
 	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT1U,r11
+	mtspr	SPRN_IBAT1L,r8
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT2U,r11
+	mtspr	SPRN_IBAT2L,r8
 	isync
 	blr
 
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a5..a359cb0 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@
 	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
-		dev_set_name(&dev->dev, bus_id);
+		dev_set_name(&dev->dev, "%s", bus_id);
 	else
 		of_device_make_bus_id(dev);
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135b..892a9f2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@
 
 	for (i = 0;  i < 32;  i++) {
 		if ((i % REGS_PER_LINE) == 0)
-			printk("\n" KERN_INFO "GPR%02d: ", i);
+			printk("\nGPR%02d: ", i);
 		printk(REG " ", regs->gpr[i]);
 		if (i == LAST_VOLATILE && !FULL_REGS(regs))
 			break;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c760..c434823 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,9 +38,10 @@
 #include <asm/syscalls.h>
 #include <asm/smp.h>
 #include <asm/atomic.h>
+#include <asm/time.h>
 
 struct rtas_t rtas = {
-	.lock = SPIN_LOCK_UNLOCKED
+	.lock = __RAW_SPIN_LOCK_UNLOCKED
 };
 EXPORT_SYMBOL(rtas);
 
@@ -67,6 +68,28 @@
 void (*rtas_flash_term_hook)(int);
 EXPORT_SYMBOL(rtas_flash_term_hook);
 
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	__raw_spin_lock_flags(&rtas.lock, flags);
+	return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+	__raw_spin_unlock(&rtas.lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
 /*
  * call_rtas_display_status and call_rtas_display_status_delay
  * are designed only for very early low-level debugging, which
@@ -79,7 +102,7 @@
 
 	if (!rtas.base)
 		return;
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 
 	args->token = 10;
 	args->nargs = 1;
@@ -89,7 +112,7 @@
 
 	enter_rtas(__pa(args));
 
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 }
 
 static void call_rtas_display_status_delay(char c)
@@ -411,8 +434,7 @@
 	if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
 		return -1;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 	rtas_args = &rtas.args;
 
 	rtas_args->token = token;
@@ -439,8 +461,7 @@
 			outputs[i] = rtas_args->rets[i+1];
 	ret = (nret > 0)? rtas_args->rets[0]: 0;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 
 	if (buff_copy) {
 		log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +858,7 @@
 
 	buff_copy = get_errorlog_buffer();
 
-	spin_lock_irqsave(&rtas.lock, flags);
+	flags = lock_rtas();
 
 	rtas.args = args;
 	enter_rtas(__pa(&rtas.args));
@@ -848,7 +869,7 @@
 	if (args.rets[0] == -1)
 		errbuf = __fetch_rtas_last_error(buff_copy);
 
-	spin_unlock_irqrestore(&rtas.lock, flags);
+	unlock_rtas(flags);
 
 	if (buff_copy) {
 		if (errbuf)
@@ -951,3 +972,33 @@
 	/* break now */
 	return 1;
 }
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
+	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+	timebase = get_tb();
+	__raw_spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+	local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	__raw_spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	__raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d15424..e1e3059 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@
  */
 notrace void __init machine_init(unsigned long dt_ptr)
 {
+	lockdep_init();
+
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2..0b47de0 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
 
 int smt_enabled_at_boot = 1;
 
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a89..acb74a1 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@
 #ifdef CONFIG_PPC_EARLY_DEBUG_44x
 #include <platforms/44x/44x.h>
 
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
 {
 	if (udbg_comport) {
 		while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e..3e68363 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM)		+= highmem.o
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 0000000..c2186c7
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	debug_kmap_atomic(type);
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+	local_flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	local_flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9..0362c88 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -65,7 +66,6 @@
 
 static u32 post_info;
 
-/* I am not sure this is the best place for this... */
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -194,9 +194,9 @@
 	return 0;
 }
 
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+				     struct i2c_client *client)
 {
-	struct device_node *np;
 	int irq, rc;
 
 	/* Do this before enabling critical temp interrupt since we
@@ -208,14 +208,7 @@
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
 	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
-	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
-	if (np == NULL) {
-		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
-		return;
-	}
-
 	irq = irq_of_parse_and_map(np, 0);
-	of_node_put(np);
 	if (irq  == NO_IRQ) {
 		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
 		return;
@@ -244,32 +237,24 @@
 
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	struct i2c_adapter *adap;
+	struct device_node *np;
 	struct i2c_client *client;
 
-	/* We loop in case either driver was compiled as a module and
-	 * has not been insmoded yet.
-	 */
-	while (!(adap = i2c_get_adapter(0))) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL)
+		return -ENOENT;
+
+	client = of_find_i2c_device_by_node(np);
+	if (client == NULL) {
+		of_node_put(np);
+		return -ENOENT;
 	}
 
-	while (1) {
-		list_for_each_entry(client, &adap->clients, list)
-			if (client->addr == 0x4a)
-				goto found_it;
+	pika_setup_critical_temp(np, client);
 
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
-	}
+	of_node_put(np);
 
-found_it:
-	pika_setup_critical_temp(client);
-
-	i2c_put_adapter(adap);
-
-	printk(KERN_INFO "PIKA DTM thread running.\n");
+	printk(KERN_INFO "Warp DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
 		int val;
@@ -291,7 +276,6 @@
 	return 0;
 }
 
-
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b3..60ed9c0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,rapidio-delta", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db..62c592ede6 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@
 
 	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
 
-	local_irq_save(flags);
-
 	np = of_get_cpu_node(nr, NULL);
 	cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
-		local_irq_restore(flags);
 		return;
 	}
 
 	/* Map the spin table */
 	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
 
+	local_irq_save(flags);
+
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
@@ -73,10 +72,10 @@
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
-	iounmap(bptr_vaddr);
-
 	local_irq_restore(flags);
 
+	iounmap(bptr_vaddr);
+
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
 
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443..747d8fb 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@
 	{},
 };
 
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
 {
-	of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+	return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
 }
+machine_device_initcall(socrates, socrates_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@
 	.name			= "Socrates",
 	.probe			= socrates_probe,
 	.setup_arch		= socrates_setup_arch,
-	.init			= socrates_init,
 	.init_IRQ		= socrates_pic_init,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532..1b42605 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
 
 /* A few bit definitions needed for fixups on some boards */
 #define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803..bc97fad 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -140,31 +139,6 @@
 	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_cell_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = cell_give_timebase;
-		smp_ops->take_timebase = cell_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d..02cafec 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
@@ -42,40 +41,12 @@
 	mpic_setup_this_cpu();
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-	printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
 /* CHRP with openpic */
 struct smp_ops_t chrp_smp_ops = {
 	.message_pass = smp_mpic_message_pass,
 	.probe = smp_mpic_probe,
 	.kick_cpu = smp_chrp_kick_cpu,
 	.setup_cpu = smp_chrp_setup_cpu,
-	.give_timebase = smp_chrp_give_timebase,
-	.take_timebase = smp_chrp_take_timebase,
+	.give_timebase = rtas_give_timebase,
+	.take_timebase = rtas_take_timebase,
 };
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051e..a461934 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@
 }
 
 #ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
 static unsigned long timebase;
 
 static void __devinit pas_give_timebase(void)
 {
-	spin_lock(&timebase_lock);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
 	mtspr(SPRN_TBCTL, TBCTL_FREEZE);
 	isync();
 	timebase = get_tb();
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 
 	while (timebase)
 		barrier();
 	mtspr(SPRN_TBCTL, TBCTL_RESTART);
+	local_irq_restore(flags);
 }
 
 static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@
 	while (!timebase)
 		smp_rmb();
 
-	spin_lock(&timebase_lock);
+	__raw_spin_lock(&timebase_lock);
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 }
 
 struct smp_ops_t pas_smp_ops = {
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4..c205226 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@
 EXPORT_SYMBOL(smu_cmdbuf_abs);
 #endif
 
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
 static void pmac_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *np;
@@ -341,34 +336,6 @@
 		ROOT_DEV = DEFAULT_ROOT_DEVICE;
 #endif
 
-#ifdef CONFIG_SMP
-	/* Check for Core99 */
-	ic = of_find_node_by_name(NULL, "uni-n");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u3");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u4");
-	if (ic) {
-		of_node_put(ic);
-		smp_ops = &core99_smp_ops;
-	}
-#ifdef CONFIG_PPC32
-	else {
-		/*
-		 * We have to set bits in cpu_possible_map here since the
-		 * secondary CPU(s) aren't in the device tree, and
-		 * setup_per_cpu_areas only allocates per-cpu data for
-		 * CPUs in the cpu_possible_map.
-		 */
-		int cpu;
-
-		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
-			cpu_set(cpu, cpu_possible_map);
-		smp_ops = &psurge_smp_ops;
-	}
-#endif
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_ADB
 	if (strstr(cmd_line, "adb_sync")) {
 		extern int __adb_probe_sync;
@@ -512,6 +479,14 @@
 #ifdef CONFIG_PPC64
 	iommu_init_early_dart();
 #endif
+
+	/* SMP Init has to be done early as we need to patch up
+	 * cpu_possible_map before interrupt stacks are allocated
+	 * or kaboom...
+	 */
+#ifdef CONFIG_SMP
+	pmac_setup_smp();
+#endif
 }
 
 static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe7..6d4da7b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
 extern void __secondary_start_pmac_0(void);
 extern int pmac_pfunc_base_install(void);
 
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
 
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
 
 /*
  * Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@
 		psurge_quad_init();
 		/* All released cards using this HW design have 4 CPUs */
 		ncpus = 4;
+		/* No sure how timebase sync works on those, let's use SW */
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
 	} else {
 		iounmap(quad_base);
 		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 
-	/*
-	 * This is necessary because OF doesn't know about the
+	/* This is necessary because OF doesn't know about the
 	 * secondary cpu(s), and thus there aren't nodes in the
 	 * device tree for them, and smp_setup_cpu_maps hasn't
-	 * set their bits in cpu_possible_map and cpu_present_map.
+	 * set their bits in cpu_present_map.
 	 */
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
-	for (i = 1; i < ncpus ; ++i) {
+	for (i = 1; i < ncpus ; ++i)
 		cpu_set(i, cpu_present_map);
-		set_hard_smp_processor_id(i, i);
-	}
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 
@@ -329,8 +330,14 @@
 static void __init smp_psurge_kick_cpu(int nr)
 {
 	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
-	unsigned long a;
-	int i;
+	unsigned long a, flags;
+	int i, j;
+
+	/* Defining this here is evil ... but I prefer hiding that
+	 * crap to avoid giving people ideas that they can do the
+	 * same.
+	 */
+	extern volatile unsigned int cpu_callin_map[NR_CPUS];
 
 	/* may need to flush here if secondary bats aren't setup */
 	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
 
+	/* This is going to freeze the timeebase, we disable interrupts */
+	local_irq_save(flags);
+
 	out_be32(psurge_start, start);
 	mb();
 
 	psurge_set_ipi(nr);
+
 	/*
 	 * We can't use udelay here because the timebase is now frozen.
 	 */
 	for (i = 0; i < 2000; ++i)
-		barrier();
+		asm volatile("nop" : : : "memory");
 	psurge_clr_ipi(nr);
 
-	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt.  This routine
- * uses this to get the timebases synchronized.
- *  -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
-	int t;
-
-	set_dec(tb_ticks_per_jiffy);
-	/* XXX fixme */
-	set_tb(0, 0);
-
-	if (cpu_nr > 0) {
-		mb();
-		sec_tb_reset = 1;
-		return;
+	/*
+	 * Also, because the timebase is frozen, we must not return to the
+	 * caller which will try to do udelay's etc... Instead, we wait -here-
+	 * for the CPU to callin.
+	 */
+	for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+		for (j = 1; j < 10000; j++)
+			asm volatile("nop" : : : "memory");
+		asm volatile("sync" : : : "memory");
 	}
+	if (!cpu_callin_map[nr])
+		goto stuck;
 
-	/* wait for the secondary to have reset its TB before proceeding */
-	for (t = 10000000; t > 0 && !sec_tb_reset; --t)
-		;
+	/* And we do the TB sync here too for standard dual CPU cards */
+	if (psurge_type == PSURGE_DUAL) {
+		while(!tb_req)
+			barrier();
+		tb_req = 0;
+		mb();
+		timebase = get_tb();
+		mb();
+		while (timebase)
+			barrier();
+		mb();
+	}
+ stuck:
+	/* now interrupt the secondary, restarting both TBs */
+	if (psurge_type == PSURGE_DUAL)
+		psurge_set_ipi(1);
 
-	/* now interrupt the secondary, starting both TBs */
-	psurge_set_ipi(1);
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
 }
 
 static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@
 
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	if (cpu_nr != 0)
+		return;
 
-	if (cpu_nr == 0) {
-		/* If we failed to start the second CPU, we should still
-		 * send it an IPI to start the timebase & DEC or we might
-		 * have them stuck.
-		 */
-		if (num_online_cpus() < 2) {
-			if (psurge_type == PSURGE_DUAL)
-				psurge_set_ipi(1);
-			return;
-		}
-		/* reset the entry point so if we get another intr we won't
-		 * try to startup again */
-		out_be32(psurge_start, 0x100);
-		if (setup_irq(30, &psurge_irqaction))
-			printk(KERN_ERR "Couldn't get primary IPI interrupt");
-	}
-
-	if (psurge_type == PSURGE_DUAL)
-		psurge_dual_sync_tb(cpu_nr);
+	/* reset the entry point so if we get another intr we won't
+	 * try to startup again */
+	out_be32(psurge_start, 0x100);
+	if (setup_irq(30, &psurge_irqaction))
+		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
 void __init smp_psurge_take_timebase(void)
 {
-	/* Dummy implementation */
+	if (psurge_type != PSURGE_DUAL)
+		return;
+
+	tb_req = 1;
+	mb();
+	while (!timebase)
+		barrier();
+	mb();
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	mb();
+	set_dec(tb_ticks_per_jiffy/2);
 }
 
 void __init smp_psurge_give_timebase(void)
 {
-	/* Dummy implementation */
+	/* Nothing to do here */
 }
 
 /* PowerSurge-style Macs */
@@ -437,9 +448,6 @@
  * Core 99 and later support
  */
 
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
 
 static void smp_core99_give_timebase(void)
 {
@@ -478,7 +486,6 @@
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
 	mb();
-	set_dec(tb_ticks_per_jiffy/2);
 
 	local_irq_restore(flags);
 }
@@ -920,3 +927,34 @@
 # endif
 #endif
 };
+
+void __init pmac_setup_smp(void)
+{
+	struct device_node *np;
+
+	/* Check for Core99 */
+	np = of_find_node_by_name(NULL, "uni-n");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u3");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u4");
+	if (np) {
+		of_node_put(np);
+		smp_ops = &core99_smp_ops;
+	}
+#ifdef CONFIG_PPC32
+	else {
+		/* We have to set bits in cpu_possible_map here since the
+		 * secondary CPU(s) aren't in the device tree. Various
+		 * things won't be initialized for CPUs not in the possible
+		 * map, so we really need to fix it up here.
+		 */
+		int cpu;
+
+		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+			cpu_set(cpu, cpu_possible_map);
+		smp_ops = &psurge_smp_ops;
+	}
+#endif /* CONFIG_PPC32 */
+}
+
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c3..1f8f6cf 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -118,31 +117,6 @@
 }
 #endif /* CONFIG_XICS */
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_pSeries_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = pSeries_give_timebase;
-		smp_ops->take_timebase = pSeries_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	pr_debug(" <- smp_init_pSeries()\n");
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af50..d46de1f 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@
 }
 
 #ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+			  struct mpic_reg_bank *rb,
 			  unsigned int offset, unsigned int size)
 {
 	const u32 *dbasep;
 
-	dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+	dbasep = of_get_property(node, "dcr-reg", NULL);
 
-	rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+	rb->dhost = dcr_map(node, *dbasep + offset, size);
 	BUG_ON(!DCR_MAP_OK(rb->dhost));
 }
 
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
-			    struct mpic_reg_bank *rb, unsigned int offset,
-			    unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+			    phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+			    unsigned int offset, unsigned int size)
 {
 	if (mpic->flags & MPIC_USES_DCR)
-		_mpic_map_dcr(mpic, rb, offset, size);
+		_mpic_map_dcr(mpic, node, rb, offset, size);
 	else
 		_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
 }
 #else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
 #endif /* !CONFIG_PPC_DCR */
 
 
@@ -1052,11 +1053,10 @@
 	int		intvec_top;
 	u64		paddr = phys_addr;
 
-	mpic = alloc_bootmem(sizeof(struct mpic));
+	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)
 		return NULL;
-	
-	memset(mpic, 0, sizeof(struct mpic));
+
 	mpic->name = name;
 
 	mpic->hc_irq = mpic_irq_chip;
@@ -1152,8 +1152,8 @@
 	}
 
 	/* Map the global registers */
-	mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
-	mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
 	/* Reset */
 	if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1194,7 @@
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
-		mpic_map(mpic, paddr, &mpic->cpuregs[i],
+		mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
 			 MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
 			 0x1000);
 	}
@@ -1202,7 +1202,7 @@
 	/* Initialize main ISU if none provided */
 	if (mpic->isu_size == 0) {
 		mpic->isu_size = mpic->num_sources;
-		mpic_map(mpic, paddr, &mpic->isus[0],
+		mpic_map(mpic, node, paddr, &mpic->isus[0],
 			 MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 	}
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1256,10 @@
 
 	BUG_ON(isu_num >= MPIC_MAX_ISU);
 
-	mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+	mpic_map(mpic, mpic->irqhost->of_node,
+		 paddr, &mpic->isus[isu_num], 0,
 		 MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
 	if ((isu_first + mpic->isu_size) > mpic->num_sources)
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e5..237e365 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@
 {
 	unsigned long flags;
 	u8 mcn_shift = 0, dev_shift = 0;
+	u32 ret;
 
 	spin_lock_irqsave(&qe_lock, flags);
 	if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@
 	}
 
 	/* wait for the QE_CR_FLG to clear */
-	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
-		cpu_relax();
+	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+			   100, 0);
+	/* On timeout (e.g. failure), the expression will be false (ret == 0),
+	   otherwise it will be true (ret == 1). */
 	spin_unlock_irqrestore(&qe_lock, flags);
 
-	return 0;
+	return ret == 1;
 }
 EXPORT_SYMBOL(qe_issue_cmd);
 
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5..1cd02f6 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@
 	__u8	reservedd0[48];		/* 0x00d0 */
 	__u64	gcr[16];		/* 0x0100 */
 	__u64	gbea;			/* 0x0180 */
-	__u8	reserved188[120];	/* 0x0188 */
+	__u8	reserved188[24];	/* 0x0188 */
+	__u32	fac;			/* 0x01a0 */
+	__u8	reserved1a4[92];	/* 0x01a4 */
 } __attribute__((packed));
 
 struct kvm_vcpu_stat {
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d..90d9d1b 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
 #include <asm/lowcore.h>
 #include <asm/pgtable.h>
 #include <asm/nmi.h>
+#include <asm/system.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -69,6 +70,7 @@
 	{ NULL }
 };
 
+static unsigned long long *facilities;
 
 /* Section: not file related */
 void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@
 	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
+	vcpu->arch.sie_block->fac   = (int) (long) facilities;
 	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
@@ -739,11 +742,29 @@
 
 static int __init kvm_s390_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	int ret;
+	ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	if (ret)
+		return ret;
+
+	/*
+	 * guests can ask for up to 255+1 double words, we need a full page
+	 * to hold the maximum amount of facilites. On the other hand, we
+	 * only set facilities that are known to work in KVM.
+	 */
+	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	if (!facilities) {
+		kvm_exit();
+		return -ENOMEM;
+	}
+	stfle(facilities, 1);
+	facilities[0] &= 0xff00fff3f0700000ULL;
+	return 0;
 }
 
 static void __exit kvm_s390_exit(void)
 {
+	free_page((unsigned long) facilities);
 	kvm_exit();
 }
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06..d426aac 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@
 
 	vcpu->stat.instruction_stfl++;
 	/* only pass the facility bits, which we can handle */
-	facility_list &= 0xfe00fff3;
+	facility_list &= 0xff00fff3;
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8..1ff0fd9 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@
 
 ifeq ($(CONFIG_SPARC32),y)
 quiet_cmd_piggy		= PIGGY   $@
-      cmd_piggy		= $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+      cmd_piggy		= $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
 quiet_cmd_btfix		= BTFIX   $@
       cmd_btfix		= $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
 quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
@@ -58,7 +58,7 @@
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
 
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 
@@ -79,7 +79,7 @@
 	$(call if_changed,strip)
 	@echo '  kernel: $@ is ready'
 
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 	@echo '  kernel: $@ is ready'
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c..e8dc9ad 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@
 int main(int argc,char **argv)
 {
 	static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
-	unsigned char buffer[1024], *q, *r;
+	char buffer[1024], *q, *r;
 	unsigned int i, j, k, start, end, offset;
 	FILE *map;
 	struct stat s;
@@ -84,7 +84,7 @@
 	while (fgets (buffer, 1024, map)) {
 		if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
 			start = strtoul (buffer, NULL, 16);
-		else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+		else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
 			end = strtoul (buffer, NULL, 16);
 	}
 	fclose (map);
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bf..c63fd1b 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@
 	struct stat s;
 	int image, tail;
 	
+	start = end = 0;
 	if (stat (argv[3], &s) < 0) die (argv[3]);
 	map = fopen (argv[2], "r");
 	if (!map) die(argv[2]);
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd07505..f0ee790 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/bootmem.h>
 #include <linux/irq.h>
 
 #include <asm/ptrace.h>
@@ -914,25 +913,19 @@
 			   tb->nonresum_qmask);
 }
 
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size.  The base real address must be aligned to the size of the
+ * region.  Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
 {
 	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
+	unsigned long order = get_order(size);
+	unsigned long p;
+
+	p = __get_free_pages(GFP_KERNEL, order);
 	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
-		prom_halt();
-	}
-
-	*pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
-{
-	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
-
-	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+		prom_printf("SUN4V: Error, cannot allocate queue.\n");
 		prom_halt();
 	}
 
@@ -942,11 +935,11 @@
 static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
 {
 #ifdef CONFIG_SMP
-	void *page;
+	unsigned long page;
 
 	BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
 
-	page = alloc_bootmem_pages(PAGE_SIZE);
+	page = get_zeroed_page(GFP_KERNEL);
 	if (!page) {
 		prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
 		prom_halt();
@@ -965,13 +958,13 @@
 	for_each_possible_cpu(cpu) {
 		struct trap_per_cpu *tb = &trap_block[cpu];
 
-		alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
-		alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
-		alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
-		alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
-		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
-		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
-			       tb->nonresum_qmask);
+		alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+		alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+		alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+		alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+				tb->nonresum_qmask);
 	}
 }
 
@@ -999,7 +992,7 @@
 	kill_prom_timer();
 
 	size = sizeof(struct ino_bucket) * NUM_IVECS;
-	ivector_table = alloc_bootmem(size);
+	ivector_table = kzalloc(size, GFP_KERNEL);
 	if (!ivector_table) {
 		prom_printf("Fatal error, cannot allocate ivector_table\n");
 		prom_halt();
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec1756..dd2aadc 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7..e376284 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708..378de4b 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@
 }
 
 static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
 	BUG();
 }
 
 static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 	    enum dma_data_direction direction)
 {
 	BUG();
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632..7a10659 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -16,10 +16,10 @@
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
 /* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
 #define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
 #else
-#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT + THREAD_ORDER)
 #endif
 #define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
 
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d..1ff685c 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
 
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
 	        dma_addr_t ADDR_NAME;
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30..103f1dd 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
 
 #else /* ...!ASSEMBLY */
 
+#include <linux/kernel.h>
 #include <linux/stringify.h>
 
 #ifdef CONFIG_SMP
@@ -155,6 +156,15 @@
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+	return NULL;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e1..fa64e40 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET			0
+
 #else
 static inline void init_hw_perf_counters(void)		{ }
 static inline void perf_counters_lapic_init(void)	{ }
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8..28e5f59 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@
 {
 #ifdef CONFIG_X86_HT
 	unsigned bits;
+	int cpu = smp_processor_id();
 
 	bits = c->x86_coreid_bits;
-
 	/* Low order bits define the core id (index of core in socket) */
 	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
 	/* Convert the initial APIC ID into the socket ID */
 	c->phys_proc_id = c->initial_apicid >> bits;
+	/* use socket ID also for last level cache */
+	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 #endif
 }
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4d..f1961c0 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -848,9 +848,6 @@
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	numa_add_cpu(smp_processor_id());
 #endif
-
-	/* Cap the iomem address space to what is addressable on all CPUs */
-	iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
 }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de..af425b8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1117,7 +1117,7 @@
 		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
 
 	t->expires = jiffies + *n;
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
 	t->expires = round_jiffies(jiffies + *n);
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef2..d4cf4ce 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -401,7 +401,7 @@
 		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
@@ -912,6 +912,8 @@
 	err = checking_wrmsrl(hwc->counter_base + idx,
 			     (u64)(-left) & x86_pmu.counter_mask);
 
+	perf_counter_update_userpage(counter);
+
 	return ret;
 }
 
@@ -969,13 +971,6 @@
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	/*
-	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
-	 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-					boot_cpu_data.x86_model == 28)
-		return -1;
-
 	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1041,6 +1036,8 @@
 	x86_perf_counter_set_period(counter, hwc, idx);
 	x86_pmu.enable(hwc, idx);
 
+	perf_counter_update_userpage(counter);
+
 	return 0;
 }
 
@@ -1133,6 +1130,8 @@
 	x86_perf_counter_update(counter, hwc, idx);
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
+
+	perf_counter_update_userpage(counter);
 }
 
 /*
@@ -1428,8 +1427,6 @@
 	 */
 	x86_pmu.num_counters_fixed	= max((int)edx.split.num_counters_fixed, 3);
 
-	rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
 	/*
 	 * Install the hw-cache-events table:
 	 */
@@ -1499,21 +1496,22 @@
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
-		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 		WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
 		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 	}
 	perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
 	perf_max_counters = x86_pmu.num_counters;
 
 	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
-		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 		WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
 		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 	}
 
 	perf_counter_mask |=
 		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+	x86_pmu.intel_ctrl = perf_counter_mask;
 
 	perf_counters_lapic_init();
 	register_die_notifier(&perf_counter_nmi_notifier);
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa..c840571 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
 #include "dumpstack.h"
 
 int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
 unsigned int code_bytes = 64;
 int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
 static int die_counter;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80..de2cab1 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@
 	return ret;
 }
 
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+	if (direct_gbpages && cpu_has_gbpages)
+		printk(KERN_INFO "Using GB pages for direct mapping\n");
+	else
+		direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
 static void __init reserve_brk(void)
 {
 	if (_brk_end > _brk_start)
@@ -871,6 +885,8 @@
 
 	reserve_brk();
 
+	init_gbpages();
+
 	/* max_pfn_mapped is updated here */
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f082..29a3eef 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@
 }
 
 /*
- * Remap allocator
+ * Large page remap allocator
  *
  * This allocator uses PMD page as unit.  A PMD page is allocated for
  * each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,105 +137,185 @@
  * better than only using 4k mappings while still being NUMA friendly.
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+struct pcpul_ent {
+	unsigned int	cpu;
+	void		*ptr;
+};
 
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
+static struct vm_struct pcpul_vm;
+
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
 {
 	size_t off = (size_t)pageno << PAGE_SHIFT;
 
-	if (off >= pcpur_size)
+	if (off >= pcpul_size)
 		return NULL;
 
-	return virt_to_page(pcpur_ptrs[cpu] + off);
+	return virt_to_page(pcpul_map[cpu].ptr + off);
 }
 
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
-	static struct vm_struct vm;
-	size_t ptrs_size, dyn_size;
+	size_t map_size, dyn_size;
 	unsigned int cpu;
+	int i, j;
 	ssize_t ret;
 
-	/*
-	 * If large page isn't supported, there's no benefit in doing
-	 * this.  Also, on non-NUMA, embedding is better.
-	 *
-	 * NOTE: disabled for now.
-	 */
-	if (true || !cpu_has_pse || !pcpu_need_numa())
+	if (!chosen) {
+		size_t vm_size = VMALLOC_END - VMALLOC_START;
+		size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+		/* on non-NUMA, embedding is better */
+		if (!pcpu_need_numa())
+			return -EINVAL;
+
+		/* don't consume more than 20% of vmalloc area */
+		if (tot_size > vm_size / 5) {
+			pr_info("PERCPU: too large chunk size %zuMB for "
+				"large page remap\n", tot_size >> 20);
+			return -EINVAL;
+		}
+	}
+
+	/* need PSE */
+	if (!cpu_has_pse) {
+		pr_warning("PERCPU: lpage allocator requires PSE\n");
 		return -EINVAL;
+	}
 
 	/*
 	 * Currently supports only single page.  Supporting multiple
 	 * pages won't be too difficult if it ever becomes necessary.
 	 */
-	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+	pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
 			       PERCPU_DYNAMIC_RESERVE);
-	if (pcpur_size > PMD_SIZE) {
+	if (pcpul_size > PMD_SIZE) {
 		pr_warning("PERCPU: static data is larger than large page, "
 			   "can't use large page\n");
 		return -EINVAL;
 	}
-	dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
-	pcpur_ptrs = alloc_bootmem(ptrs_size);
+	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+	pcpul_map = alloc_bootmem(map_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
-		if (!pcpur_ptrs[cpu])
+		pcpul_map[cpu].cpu = cpu;
+		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+							PMD_SIZE);
+		if (!pcpul_map[cpu].ptr) {
+			pr_warning("PERCPU: failed to allocate large page "
+				   "for cpu%u\n", cpu);
 			goto enomem;
+		}
 
 		/*
-		 * Only use pcpur_size bytes and give back the rest.
+		 * Only use pcpul_size bytes and give back the rest.
 		 *
 		 * Ingo: The 2MB up-rounding bootmem is needed to make
 		 * sure the partial 2MB page is still fully RAM - it's
 		 * not well-specified to have a PAT-incompatible area
 		 * (unmapped RAM, device memory, etc.) in that hole.
 		 */
-		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
-			     PMD_SIZE - pcpur_size);
+		free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
+			     PMD_SIZE - pcpul_size);
 
-		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
-	vm.flags = VM_ALLOC;
-	vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&vm, PMD_SIZE);
+	pcpul_vm.flags = VM_ALLOC;
+	pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+	vm_area_register_early(&pcpul_vm, PMD_SIZE);
 
 	for_each_possible_cpu(cpu) {
-		pmd_t *pmd;
+		pmd_t *pmd, pmd_v;
 
-		pmd = populate_extra_pmd((unsigned long)vm.addr
-					 + cpu * PMD_SIZE);
-		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
-				     PAGE_KERNEL_LARGE));
+		pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+					 cpu * PMD_SIZE);
+		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+				PAGE_KERNEL_LARGE);
+		set_pmd(pmd, pmd_v);
 	}
 
 	/* we're ready, commit */
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", vm.addr, static_size);
+		"%zu bytes\n", pcpul_vm.addr, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, vm.addr, NULL);
-	goto out_free_ar;
+				     PMD_SIZE, pcpul_vm.addr, NULL);
+
+	/* sort pcpul_map array for pcpu_lpage_remapped() */
+	for (i = 0; i < num_possible_cpus() - 1; i++)
+		for (j = i + 1; j < num_possible_cpus(); j++)
+			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+				struct pcpul_ent tmp = pcpul_map[i];
+				pcpul_map[i] = pcpul_map[j];
+				pcpul_map[j] = tmp;
+			}
+
+	return ret;
 
 enomem:
 	for_each_possible_cpu(cpu)
-		if (pcpur_ptrs[cpu])
-			free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
-	ret = -ENOMEM;
-out_free_ar:
-	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
-	return ret;
+		if (pcpul_map[cpu].ptr)
+			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
+	free_bootmem(__pa(pcpul_map), map_size);
+	return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area.  This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+	int left = 0, right = num_possible_cpus() - 1;
+	int pos;
+
+	/* pcpul in use at all? */
+	if (!pcpul_map)
+		return NULL;
+
+	/* okay, perform binary search */
+	while (left <= right) {
+		pos = (left + right) / 2;
+
+		if (pcpul_map[pos].ptr < pmd_addr)
+			left = pos + 1;
+		else if (pcpul_map[pos].ptr > pmd_addr)
+			right = pos - 1;
+		else {
+			/* it shouldn't be in the area for the first chunk */
+			WARN_ON(offset < pcpul_size);
+
+			return pcpul_vm.addr +
+				pcpul_map[pos].cpu * PMD_SIZE + offset;
+		}
+	}
+
+	return NULL;
 }
 #else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
 	return -EINVAL;
 }
@@ -249,7 +329,7 @@
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -258,7 +338,7 @@
 	 * this.  Also, embedding allocation doesn't play well with
 	 * NUMA.
 	 */
-	if (!cpu_has_pse || pcpu_need_numa())
+	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -308,8 +388,11 @@
 			void *ptr;
 
 			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
-			if (!ptr)
+			if (!ptr) {
+				pr_warning("PERCPU: failed to allocate "
+					   "4k page for cpu%u\n", cpu);
 				goto enomem;
+			}
 
 			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
 			pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -333,6 +416,16 @@
 	return ret;
 }
 
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+	return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -346,11 +439,6 @@
 #endif
 }
 
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
 void __init setup_per_cpu_areas(void)
 {
 	size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -367,9 +455,26 @@
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = setup_pcpu_remap(static_size);
-	if (ret < 0)
-		ret = setup_pcpu_embed(static_size);
+	ret = -EINVAL;
+	if (strlen(pcpu_chosen_alloc)) {
+		if (strcmp(pcpu_chosen_alloc, "4k")) {
+			if (!strcmp(pcpu_chosen_alloc, "lpage"))
+				ret = setup_pcpu_lpage(static_size, true);
+			else if (!strcmp(pcpu_chosen_alloc, "embed"))
+				ret = setup_pcpu_embed(static_size, true);
+			else
+				pr_warning("PERCPU: unknown allocator %s "
+					   "specified\n", pcpu_chosen_alloc);
+			if (ret < 0)
+				pr_warning("PERCPU: %s allocator failed (%zd), "
+					   "falling back to 4k\n",
+					   pcpu_chosen_alloc, ret);
+		}
+	} else {
+		ret = setup_pcpu_lpage(static_size, false);
+		if (ret < 0)
+			ret = setup_pcpu_embed(static_size, false);
+	}
 	if (ret < 0)
 		ret = setup_pcpu_4k(static_size);
 	if (ret < 0)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c..8ccabb8 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@
 	unsigned long pa;
 	unsigned long m;
 	unsigned long n;
-	unsigned long mmr_image;
 	struct bau_desc *adp;
 	struct bau_desc *ad2;
 
@@ -727,12 +726,8 @@
 	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
-	mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
-	if (mmr_image) {
-		uv_write_global_mmr64(pnode, (unsigned long)
-				      UVH_LB_BAU_SB_DESCRIPTOR_BASE,
-				      (n << UV_DESC_BASE_PNODE_SHIFT | m));
-	}
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+			      (n << UV_DESC_BASE_PNODE_SHIFT | m));
 
 	/*
 	 * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5..5204332 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@
 	printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
 	show_registers(regs);
 
+	if (panic_on_io_nmi)
+		panic("NMI IOCK error: Not continuing");
+
 	/* Re-enable the IOCK line, wait for a few seconds */
 	reason = (reason & 0xf) | 8;
 	outb(reason, 0x61);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e8..7030b5f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2157,7 +2157,7 @@
 		else
 			/* 32 bits PSE 4MB page */
 			context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT32E_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2170,7 @@
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 62) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT64_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2186,7 @@
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	}
 }
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e459..67785f6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@
 {
 	unsigned access = gw->pt_access;
 	struct kvm_mmu_page *shadow_page;
-	u64 spte, *sptep;
+	u64 spte, *sptep = NULL;
 	int direct;
 	gfn_t table_gfn;
 	int r;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf3..356a0ce 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@
 	return 1;
 }
 
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	kvm_queue_exception(vcpu, UD_VECTOR);
+	return 1;
+}
+
 static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3198,6 +3204,15 @@
 	[EXIT_REASON_HLT]                     = handle_halt,
 	[EXIT_REASON_INVLPG]		      = handle_invlpg,
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
+	[EXIT_REASON_VMCLEAR]	              = handle_vmx_insn,
+	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
+	[EXIT_REASON_VMPTRLD]                 = handle_vmx_insn,
+	[EXIT_REASON_VMPTRST]                 = handle_vmx_insn,
+	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
+	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
+	[EXIT_REASON_VMWRITE]                 = handle_vmx_insn,
+	[EXIT_REASON_VMOFF]                   = handle_vmx_insn,
+	[EXIT_REASON_VMON]                    = handle_vmx_insn,
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f..fe5474a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -898,6 +898,7 @@
 	case MSR_VM_HSAVE_PA:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
+	case MSR_K7_EVNTSEL0:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c23..616de46 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@
 	return 0;
 }
 
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
 {
 	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
 	/*
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f456860..ff485d3 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@
 
 	preempt_disable();
 	cpu = smp_processor_id();
+	rdtsc_barrier();
 	rdtscl(bclock);
 	for (;;) {
+		rdtsc_barrier();
 		rdtscl(now);
 		if ((now - bclock) >= loops)
 			break;
@@ -78,6 +80,7 @@
 		if (unlikely(cpu != smp_processor_id())) {
 			loops -= (now - bclock);
 			cpu = smp_processor_id();
+			rdtsc_barrier();
 			rdtscl(bclock);
 		}
 	}
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e..47ce9a2 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -177,20 +177,6 @@
 	return nr_range;
 }
 
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
-	if (direct_gbpages && cpu_has_gbpages)
-		printk(KERN_INFO "Using GB pages for direct mapping\n");
-	else
-		direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
 /*
  * Setup the direct mapping of the physical memory at PAGE_OFFSET.
  * This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +196,6 @@
 
 	printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
 
-	if (!after_bootmem)
-		init_gbpages();
-
 #if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
 	/*
 	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4..b177652 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,8 @@
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
+	/* clear the default setting with node 0 */
+	nodes_clear(node_states[N_NORMAL_MEMORY]);
 	free_area_init_nodes(max_zone_pfns);
 }
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ce..1b734d7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/pfn.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -681,8 +682,9 @@
 static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
-	int ret = 0;
-	unsigned long temp_cpa_vaddr, vaddr;
+	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+	unsigned long vaddr, remapped;
+	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
@@ -706,42 +708,55 @@
 		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
 		alias_cpa = *cpa;
-		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
-		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.vaddr = &laddr;
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
 	}
 
 #ifdef CONFIG_X86_64
-	if (ret)
-		return ret;
 	/*
-	 * No need to redo, when the primary call touched the high
-	 * mapping already:
-	 */
-	if (within(vaddr, (unsigned long) _text, _brk_end))
-		return 0;
-
-	/*
-	 * If the physical address is inside the kernel map, we need
+	 * If the primary call didn't touch the high mapping already
+	 * and the physical address is inside the kernel map, we need
 	 * to touch the high mapped kernel as well:
 	 */
-	if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
-		return 0;
+	if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+	    within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+		unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+					       __START_KERNEL_map - phys_base;
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-	alias_cpa = *cpa;
-	temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
-	alias_cpa.vaddr = &temp_cpa_vaddr;
-	alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		/*
+		 * The high mapping range is imprecise, so ignore the
+		 * return value.
+		 */
+		__change_page_attr_set_clr(&alias_cpa, 0);
+	}
+#endif
 
 	/*
-	 * The high mapping range is imprecise, so ignore the return value.
+	 * If the PMD page was partially used for per-cpu remapping,
+	 * the recycled area needs to be split and modified.  Because
+	 * the area is always proper subset of a PMD page
+	 * cpa->numpages is guaranteed to be 1 for these areas, so
+	 * there's no need to loop over and check for further remaps.
 	 */
-	__change_page_attr_set_clr(&alias_cpa, 0);
-#endif
-	return ret;
+	remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+	if (remapped) {
+		WARN_ON(cpa->numpages > 1);
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &remapped;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1..b3d20b9 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@
 	do_fpu_end();
 	mtrr_ap_init();
 
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
 	mcheck_init(&boot_cpu_data);
 #endif
 }
diff --git a/block/Makefile b/block/Makefile
index e9fa4dd..6c54ed0 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -5,7 +5,7 @@
 obj-$(CONFIG_BLOCK) := elevator.o blk-core.o blk-tag.o blk-sysfs.o \
 			blk-barrier.o blk-settings.o blk-ioc.o blk-map.o \
 			blk-exec.o blk-merge.o blk-softirq.o blk-timeout.o \
-			ioctl.o genhd.o scsi_ioctl.o cmd-filter.o
+			ioctl.o genhd.o scsi_ioctl.o
 
 obj-$(CONFIG_BLK_DEV_BSG)	+= bsg.o
 obj-$(CONFIG_IOSCHED_NOOP)	+= noop-iosched.o
diff --git a/block/blk-core.c b/block/blk-core.c
index b06cf5c..4b45435 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -595,8 +595,6 @@
 
 	q->sg_reserved_size = INT_MAX;
 
-	blk_set_cmd_filter_defaults(&q->cmd_filter);
-
 	/*
 	 * all done
 	 */
@@ -1172,6 +1170,11 @@
 	const int unplug = bio_unplug(bio);
 	int rw_flags;
 
+	if (bio_barrier(bio) && bio_has_data(bio) &&
+	    (q->next_ordered == QUEUE_ORDERED_NONE)) {
+		bio_endio(bio, -EOPNOTSUPP);
+		return 0;
+	}
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1472,11 +1475,6 @@
 			err = -EOPNOTSUPP;
 			goto end_io;
 		}
-		if (bio_barrier(bio) && bio_has_data(bio) &&
-		    (q->next_ordered == QUEUE_ORDERED_NONE)) {
-			err = -EOPNOTSUPP;
-			goto end_io;
-		}
 
 		ret = q->make_request_fn(q, bio);
 	} while (ret);
@@ -2365,7 +2363,7 @@
 		__bio_clone(bio, bio_src);
 
 		if (bio_integrity(bio_src) &&
-		    bio_integrity_clone(bio, bio_src, gfp_mask))
+		    bio_integrity_clone(bio, bio_src, gfp_mask, bs))
 			goto free_and_out;
 
 		if (bio_ctr && bio_ctr(bio, bio_src, data))
diff --git a/block/bsg.c b/block/bsg.c
index e7d4752..5f184bb 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -186,7 +186,7 @@
 		return -EFAULT;
 
 	if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
-		if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
+		if (blk_verify_command(rq->cmd, has_write_perm))
 			return -EPERM;
 	} else if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 833ec18..87276eb 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -71,6 +71,51 @@
 #define CFQ_RB_ROOT	(struct cfq_rb_root) { RB_ROOT, NULL, }
 
 /*
+ * Per process-grouping structure
+ */
+struct cfq_queue {
+	/* reference count */
+	atomic_t ref;
+	/* various state flags, see below */
+	unsigned int flags;
+	/* parent cfq_data */
+	struct cfq_data *cfqd;
+	/* service_tree member */
+	struct rb_node rb_node;
+	/* service_tree key */
+	unsigned long rb_key;
+	/* prio tree member */
+	struct rb_node p_node;
+	/* prio tree root we belong to, if any */
+	struct rb_root *p_root;
+	/* sorted list of pending requests */
+	struct rb_root sort_list;
+	/* if fifo isn't expired, next request to serve */
+	struct request *next_rq;
+	/* requests queued in sort_list */
+	int queued[2];
+	/* currently allocated requests */
+	int allocated[2];
+	/* fifo list of requests in sort_list */
+	struct list_head fifo;
+
+	unsigned long slice_end;
+	long slice_resid;
+	unsigned int slice_dispatch;
+
+	/* pending metadata requests */
+	int meta_pending;
+	/* number of requests that are on the dispatch list or inside driver */
+	int dispatched;
+
+	/* io prio of this group */
+	unsigned short ioprio, org_ioprio;
+	unsigned short ioprio_class, org_ioprio_class;
+
+	pid_t pid;
+};
+
+/*
  * Per block device queue structure
  */
 struct cfq_data {
@@ -135,51 +180,11 @@
 	unsigned int cfq_slice_idle;
 
 	struct list_head cic_list;
-};
 
-/*
- * Per process-grouping structure
- */
-struct cfq_queue {
-	/* reference count */
-	atomic_t ref;
-	/* various state flags, see below */
-	unsigned int flags;
-	/* parent cfq_data */
-	struct cfq_data *cfqd;
-	/* service_tree member */
-	struct rb_node rb_node;
-	/* service_tree key */
-	unsigned long rb_key;
-	/* prio tree member */
-	struct rb_node p_node;
-	/* prio tree root we belong to, if any */
-	struct rb_root *p_root;
-	/* sorted list of pending requests */
-	struct rb_root sort_list;
-	/* if fifo isn't expired, next request to serve */
-	struct request *next_rq;
-	/* requests queued in sort_list */
-	int queued[2];
-	/* currently allocated requests */
-	int allocated[2];
-	/* fifo list of requests in sort_list */
-	struct list_head fifo;
-
-	unsigned long slice_end;
-	long slice_resid;
-	unsigned int slice_dispatch;
-
-	/* pending metadata requests */
-	int meta_pending;
-	/* number of requests that are on the dispatch list or inside driver */
-	int dispatched;
-
-	/* io prio of this group */
-	unsigned short ioprio, org_ioprio;
-	unsigned short ioprio_class, org_ioprio_class;
-
-	pid_t pid;
+	/*
+	 * Fallback dummy cfqq for extreme OOM conditions
+	 */
+	struct cfq_queue oom_cfqq;
 };
 
 enum cfqq_state_flags {
@@ -1641,6 +1646,26 @@
 	ioc->ioprio_changed = 0;
 }
 
+static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+			  pid_t pid, int is_sync)
+{
+	RB_CLEAR_NODE(&cfqq->rb_node);
+	RB_CLEAR_NODE(&cfqq->p_node);
+	INIT_LIST_HEAD(&cfqq->fifo);
+
+	atomic_set(&cfqq->ref, 0);
+	cfqq->cfqd = cfqd;
+
+	cfq_mark_cfqq_prio_changed(cfqq);
+
+	if (is_sync) {
+		if (!cfq_class_idle(cfqq))
+			cfq_mark_cfqq_idle_window(cfqq);
+		cfq_mark_cfqq_sync(cfqq);
+	}
+	cfqq->pid = pid;
+}
+
 static struct cfq_queue *
 cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
 		     struct io_context *ioc, gfp_t gfp_mask)
@@ -1653,56 +1678,40 @@
 	/* cic always exists here */
 	cfqq = cic_to_cfqq(cic, is_sync);
 
-	if (!cfqq) {
+	/*
+	 * Always try a new alloc if we fell back to the OOM cfqq
+	 * originally, since it should just be a temporary situation.
+	 */
+	if (!cfqq || cfqq == &cfqd->oom_cfqq) {
+		cfqq = NULL;
 		if (new_cfqq) {
 			cfqq = new_cfqq;
 			new_cfqq = NULL;
 		} else if (gfp_mask & __GFP_WAIT) {
-			/*
-			 * Inform the allocator of the fact that we will
-			 * just repeat this allocation if it fails, to allow
-			 * the allocator to do whatever it needs to attempt to
-			 * free memory.
-			 */
 			spin_unlock_irq(cfqd->queue->queue_lock);
 			new_cfqq = kmem_cache_alloc_node(cfq_pool,
-					gfp_mask | __GFP_NOFAIL | __GFP_ZERO,
+					gfp_mask | __GFP_ZERO,
 					cfqd->queue->node);
 			spin_lock_irq(cfqd->queue->queue_lock);
-			goto retry;
+			if (new_cfqq)
+				goto retry;
 		} else {
 			cfqq = kmem_cache_alloc_node(cfq_pool,
 					gfp_mask | __GFP_ZERO,
 					cfqd->queue->node);
-			if (!cfqq)
-				goto out;
 		}
 
-		RB_CLEAR_NODE(&cfqq->rb_node);
-		RB_CLEAR_NODE(&cfqq->p_node);
-		INIT_LIST_HEAD(&cfqq->fifo);
-
-		atomic_set(&cfqq->ref, 0);
-		cfqq->cfqd = cfqd;
-
-		cfq_mark_cfqq_prio_changed(cfqq);
-
-		cfq_init_prio_data(cfqq, ioc);
-
-		if (is_sync) {
-			if (!cfq_class_idle(cfqq))
-				cfq_mark_cfqq_idle_window(cfqq);
-			cfq_mark_cfqq_sync(cfqq);
-		}
-		cfqq->pid = current->pid;
-		cfq_log_cfqq(cfqd, cfqq, "alloced");
+		if (cfqq) {
+			cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
+			cfq_init_prio_data(cfqq, ioc);
+			cfq_log_cfqq(cfqd, cfqq, "alloced");
+		} else
+			cfqq = &cfqd->oom_cfqq;
 	}
 
 	if (new_cfqq)
 		kmem_cache_free(cfq_pool, new_cfqq);
 
-out:
-	WARN_ON((gfp_mask & __GFP_WAIT) && !cfqq);
 	return cfqq;
 }
 
@@ -1735,11 +1744,8 @@
 		cfqq = *async_cfqq;
 	}
 
-	if (!cfqq) {
+	if (!cfqq)
 		cfqq = cfq_find_alloc_queue(cfqd, is_sync, ioc, gfp_mask);
-		if (!cfqq)
-			return NULL;
-	}
 
 	/*
 	 * pin the queue now that it's allocated, scheduler exit will prune it
@@ -2307,10 +2313,6 @@
 	cfqq = cic_to_cfqq(cic, is_sync);
 	if (!cfqq) {
 		cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask);
-
-		if (!cfqq)
-			goto queue_fail;
-
 		cic_set_cfqq(cic, cfqq, is_sync);
 	}
 
@@ -2465,6 +2467,14 @@
 	for (i = 0; i < CFQ_PRIO_LISTS; i++)
 		cfqd->prio_trees[i] = RB_ROOT;
 
+	/*
+	 * Our fallback cfqq if cfq_find_alloc_queue() runs into OOM issues.
+	 * Grab a permanent reference to it, so that the normal code flow
+	 * will not attempt to free it.
+	 */
+	cfq_init_cfqq(cfqd, &cfqd->oom_cfqq, 1, 0);
+	atomic_inc(&cfqd->oom_cfqq.ref);
+
 	INIT_LIST_HEAD(&cfqd->cic_list);
 
 	cfqd->queue = q;
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
deleted file mode 100644
index 572bbc2..0000000
--- a/block/cmd-filter.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright 2004 Peter M. Jones <pjones@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public Licens
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-
- *
- */
-
-#include <linux/list.h>
-#include <linux/genhd.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-
-#include <scsi/scsi.h>
-#include <linux/cdrom.h>
-
-int blk_verify_command(struct blk_cmd_filter *filter,
-		       unsigned char *cmd, fmode_t has_write_perm)
-{
-	/* root can do any command. */
-	if (capable(CAP_SYS_RAWIO))
-		return 0;
-
-	/* if there's no filter set, assume we're filtering everything out */
-	if (!filter)
-		return -EPERM;
-
-	/* Anybody who can open the device can do a read-safe command */
-	if (test_bit(cmd[0], filter->read_ok))
-		return 0;
-
-	/* Write-safe commands require a writable open */
-	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
-		return 0;
-
-	return -EPERM;
-}
-EXPORT_SYMBOL(blk_verify_command);
-
-#if 0
-/* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
-			     int rw)
-{
-	char *npage = page;
-	unsigned long *okbits;
-	int i;
-
-	if (rw == READ)
-		okbits = filter->read_ok;
-	else
-		okbits = filter->write_ok;
-
-	for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
-		if (test_bit(i, okbits)) {
-			npage += sprintf(npage, "0x%02x", i);
-			if (i < BLK_SCSI_MAX_CMDS - 1)
-				sprintf(npage++, " ");
-		}
-	}
-
-	if (npage != page)
-		npage += sprintf(npage, "\n");
-
-	return npage - page;
-}
-
-static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
-{
-	return rcf_cmds_show(filter, page, READ);
-}
-
-static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
-				 char *page)
-{
-	return rcf_cmds_show(filter, page, WRITE);
-}
-
-static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
-			      const char *page, size_t count, int rw)
-{
-	unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
-	int cmd, set;
-	char *p, *status;
-
-	if (rw == READ) {
-		memcpy(&okbits, filter->read_ok, sizeof(okbits));
-		target_okbits = filter->read_ok;
-	} else {
-		memcpy(&okbits, filter->write_ok, sizeof(okbits));
-		target_okbits = filter->write_ok;
-	}
-
-	while ((p = strsep((char **)&page, " ")) != NULL) {
-		set = 1;
-
-		if (p[0] == '+') {
-			p++;
-		} else if (p[0] == '-') {
-			set = 0;
-			p++;
-		}
-
-		cmd = simple_strtol(p, &status, 16);
-
-		/* either of these cases means invalid input, so do nothing. */
-		if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
-			return -EINVAL;
-
-		if (set)
-			__set_bit(cmd, okbits);
-		else
-			__clear_bit(cmd, okbits);
-	}
-
-	memcpy(target_okbits, okbits, sizeof(okbits));
-	return count;
-}
-
-static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
-				  const char *page, size_t count)
-{
-	return rcf_cmds_store(filter, page, count, READ);
-}
-
-static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
-				   const char *page, size_t count)
-{
-	return rcf_cmds_store(filter, page, count, WRITE);
-}
-
-struct rcf_sysfs_entry {
-	struct attribute attr;
-	ssize_t (*show)(struct blk_cmd_filter *, char *);
-	ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
-};
-
-static struct rcf_sysfs_entry rcf_readcmds_entry = {
-	.attr = { .name = "read_table", .mode = S_IRUGO | S_IWUSR },
-	.show = rcf_readcmds_show,
-	.store = rcf_readcmds_store,
-};
-
-static struct rcf_sysfs_entry rcf_writecmds_entry = {
-	.attr = {.name = "write_table", .mode = S_IRUGO | S_IWUSR },
-	.show = rcf_writecmds_show,
-	.store = rcf_writecmds_store,
-};
-
-static struct attribute *default_attrs[] = {
-	&rcf_readcmds_entry.attr,
-	&rcf_writecmds_entry.attr,
-	NULL,
-};
-
-#define to_rcf(atr) container_of((atr), struct rcf_sysfs_entry, attr)
-
-static ssize_t
-rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
-{
-	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_cmd_filter *filter;
-
-	filter = container_of(kobj, struct blk_cmd_filter, kobj);
-	if (entry->show)
-		return entry->show(filter, page);
-
-	return 0;
-}
-
-static ssize_t
-rcf_attr_store(struct kobject *kobj, struct attribute *attr,
-			const char *page, size_t length)
-{
-	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_cmd_filter *filter;
-
-	if (!capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	if (!entry->store)
-		return -EINVAL;
-
-	filter = container_of(kobj, struct blk_cmd_filter, kobj);
-	return entry->store(filter, page, length);
-}
-
-static struct sysfs_ops rcf_sysfs_ops = {
-	.show = rcf_attr_show,
-	.store = rcf_attr_store,
-};
-
-static struct kobj_type rcf_ktype = {
-	.sysfs_ops = &rcf_sysfs_ops,
-	.default_attrs = default_attrs,
-};
-
-int blk_register_filter(struct gendisk *disk)
-{
-	int ret;
-	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
-	ret = kobject_init_and_add(&filter->kobj, &rcf_ktype,
-				   &disk_to_dev(disk)->kobj,
-				   "%s", "cmd_filter");
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL(blk_register_filter);
-
-void blk_unregister_filter(struct gendisk *disk)
-{
-	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
-
-	kobject_put(&filter->kobj);
-}
-EXPORT_SYMBOL(blk_unregister_filter);
-#endif
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 5f8e798..f0e0ce0 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -32,6 +32,11 @@
 #include <scsi/scsi_ioctl.h>
 #include <scsi/scsi_cmnd.h>
 
+struct blk_cmd_filter {
+	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+} blk_default_cmd_filter;
+
 /* Command group 3 is reserved and should never be used.  */
 const unsigned char scsi_command_size_tbl[8] =
 {
@@ -105,7 +110,7 @@
 	return put_user(1, p);
 }
 
-void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
+static void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
 {
 	/* Basic read-only commands */
 	__set_bit(TEST_UNIT_READY, filter->read_ok);
@@ -187,14 +192,37 @@
 	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
 	__set_bit(GPCMD_SET_READ_AHEAD, filter->write_ok);
 }
-EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
+int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm)
+{
+	struct blk_cmd_filter *filter = &blk_default_cmd_filter;
+
+	/* root can do any command. */
+	if (capable(CAP_SYS_RAWIO))
+		return 0;
+
+	/* if there's no filter set, assume we're filtering everything out */
+	if (!filter)
+		return -EPERM;
+
+	/* Anybody who can open the device can do a read-safe command */
+	if (test_bit(cmd[0], filter->read_ok))
+		return 0;
+
+	/* Write-safe commands require a writable open */
+	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
+		return 0;
+
+	return -EPERM;
+}
+EXPORT_SYMBOL(blk_verify_command);
 
 static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 			     struct sg_io_hdr *hdr, fmode_t mode)
 {
 	if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
 		return -EFAULT;
-	if (blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE))
+	if (blk_verify_command(rq->cmd, mode & FMODE_WRITE))
 		return -EPERM;
 
 	/*
@@ -427,7 +455,7 @@
 	if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
 		goto error;
 
-	err = blk_verify_command(&q->cmd_filter, rq->cmd, mode & FMODE_WRITE);
+	err = blk_verify_command(rq->cmd, mode & FMODE_WRITE);
 	if (err)
 		goto error;
 
@@ -645,5 +673,10 @@
 	blk_put_queue(q);
 	return err;
 }
-
 EXPORT_SYMBOL(scsi_cmd_ioctl);
+
+int __init blk_scsi_ioctl_init(void)
+{
+	blk_set_cmd_filter_defaults(&blk_default_cmd_filter);
+	return 0;
+}
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 8a5bf3b..55b5b90 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -395,7 +395,7 @@
 		fn  = adr & 0xffff;
 
 		pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
-		if (hnd == handle)
+		if (!pdev || hnd == handle)
 			break;
 
 		pbus = pdev->subordinate;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 862b40c..91b7530 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3327,7 +3327,10 @@
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 		mutex_lock(&open_lock);
-		LOCK_FDC(drive, 1);
+		if (lock_fdc(drive, 1)) {
+			mutex_unlock(&open_lock);
+			return -EINTR;
+		}
 		floppy_type[type] = *g;
 		floppy_type[type].name = "user format";
 		for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 140ea10..c02db01 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -27,6 +27,7 @@
 #include <linux/cdev.h>
 #include <linux/list.h>
 #include <linux/mm.h>
+#include <asm/pgtable.h>
 #include <asm/io.h>
 
 /*
@@ -75,12 +76,13 @@
 static int bsr_major;
 
 enum {
-	BSR_8   = 0,
-	BSR_16  = 1,
-	BSR_64  = 2,
-	BSR_128 = 3,
-	BSR_UNKNOWN = 4,
-	BSR_MAX = 5,
+	BSR_8    = 0,
+	BSR_16   = 1,
+	BSR_64   = 2,
+	BSR_128  = 3,
+	BSR_4096 = 4,
+	BSR_UNKNOWN = 5,
+	BSR_MAX  = 6,
 };
 
 static unsigned bsr_types[BSR_MAX];
@@ -117,15 +119,22 @@
 {
 	unsigned long size   = vma->vm_end - vma->vm_start;
 	struct bsr_dev *dev = filp->private_data;
+	int ret;
 
-	if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
-		return -EINVAL;
-
-	vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
-	if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
-			       size, vma->vm_page_prot))
+	/* check for the case of a small BSR device and map one 4k page for it*/
+	if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
+		ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
+				   vma->vm_page_prot);
+	else if (size <= dev->bsr_len)
+		ret = io_remap_pfn_range(vma, vma->vm_start,
+					 dev->bsr_addr >> PAGE_SHIFT,
+					 size, vma->vm_page_prot);
+	else
+		return -EINVAL;
+
+	if (ret)
 		return -EAGAIN;
 
 	return 0;
@@ -205,6 +214,11 @@
 		cur->bsr_stride = bsr_stride[i];
 		cur->bsr_dev    = MKDEV(bsr_major, i + total_bsr_devs);
 
+		/* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
+		/* we can only map 4k of it, so only advertise the 4k in sysfs */
+		if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
+			cur->bsr_len = 4096;
+
 		switch(cur->bsr_bytes) {
 		case 8:
 			cur->bsr_type = BSR_8;
@@ -218,9 +232,11 @@
 		case 128:
 			cur->bsr_type = BSR_128;
 			break;
+		case 4096:
+			cur->bsr_type = BSR_4096;
+			break;
 		default:
 			cur->bsr_type = BSR_UNKNOWN;
-			printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
 		}
 
 		cur->bsr_num = bsr_types[cur->bsr_type];
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index a19e935..913aa8d 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -867,15 +867,22 @@
 	tty_ldisc_wait_idle(tty);
 
 	/*
-	 * Shutdown the current line discipline, and reset it to N_TTY.
-	 *
-	 * FIXME: this MUST get fixed for the new reflocking
+	 * Now kill off the ldisc
 	 */
+	tty_ldisc_close(tty, tty->ldisc);
+	tty_ldisc_put(tty->ldisc);
+	/* Force an oops if we mess this up */
+	tty->ldisc = NULL;
 
-	tty_ldisc_reinit(tty);
+	/* Ensure the next open requests the N_TTY ldisc */
+	tty_set_termios_ldisc(tty, N_TTY);
+
 	/* This will need doing differently if we need to lock */
 	if (o_tty)
 		tty_ldisc_release(o_tty, NULL);
+
+	/* And the memory resources remaining (buffers, termios) will be
+	   disposed of when the kref hits zero */
 }
 
 /**
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c36bf40..858fe60 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -754,13 +754,13 @@
 static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
 {
 	int bit;
-	enum dev_type edac_cap = EDAC_NONE;
+	enum dev_type edac_cap = EDAC_FLAG_NONE;
 
 	bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
 		? 19
 		: 17;
 
-	if (pvt->dclr0 >> BIT(bit))
+	if (pvt->dclr0 & BIT(bit))
 		edac_cap = EDAC_FLAG_SECDED;
 
 	return edac_cap;
@@ -1269,7 +1269,7 @@
 	if (channels == 0)
 		channels = 1;
 
-	debugf0("DIMM count= %d\n", channels);
+	debugf0("MCT channel count: %d\n", channels);
 
 	return channels;
 
@@ -2966,7 +2966,12 @@
 				"    Use of the override can cause "
 				"unknown side effects.\n");
 			ret = -ENODEV;
-		}
+		} else
+			/*
+			 * enable further driver loading if ECC enable is
+			 * overridden.
+			 */
+			ret = 0;
 	} else {
 		amd64_printk(KERN_INFO,
 			"ECC is enabled by BIOS, Proceeding "
@@ -3006,7 +3011,6 @@
 
 	mci->mtype_cap		= MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
 	mci->edac_ctl_cap	= EDAC_FLAG_NONE;
-	mci->edac_cap		= EDAC_FLAG_NONE;
 
 	if (pvt->nbcap & K8_NBCAP_SECDED)
 		mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
@@ -3052,7 +3056,7 @@
 	if (!pvt)
 		goto err_exit;
 
-	pvt->mc_node_id = get_mc_node_id_from_pdev(dram_f2_ctl);
+	pvt->mc_node_id = get_node_id(dram_f2_ctl);
 
 	pvt->dram_f2_ctl	= dram_f2_ctl;
 	pvt->ext_model		= boot_cpu_data.x86_model >> 4;
@@ -3179,8 +3183,7 @@
 {
 	int ret = 0;
 
-	debugf0("(MC node=%d,mc_type='%s')\n",
-		get_mc_node_id_from_pdev(pdev),
+	debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
 		get_amd_family_name(mc_type->driver_data));
 
 	ret = pci_enable_device(pdev);
@@ -3319,15 +3322,17 @@
 
 		err = amd64_init_2nd_stage(pvt_lookup[nb]);
 		if (err)
-			goto err_exit;
+			goto err_2nd_stage;
 	}
 
 	amd64_setup_pci_device();
 
 	return 0;
 
+err_2nd_stage:
+	debugf0("2nd stage failed\n");
+
 err_exit:
-	debugf0("'finish_setup' stage failed\n");
 	pci_unregister_driver(&amd64_pci_driver);
 
 	return err;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index a159957..ba73015 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -444,7 +444,7 @@
 #define K8_MSR_MC4ADDR			0x0412
 
 /* AMD sets the first MC device at device ID 0x18. */
-static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+static inline int get_node_id(struct pci_dev *pdev)
 {
 	return PCI_SLOT(pdev->devfn) - 0x18;
 }
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3493c6b..871c13b 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -150,6 +150,8 @@
 	MEM_FB_DDR2,		/* fully buffered DDR2 */
 	MEM_RDDR2,		/* Registered DDR2 RAM */
 	MEM_XDR,		/* Rambus XDR */
+	MEM_DDR3,		/* DDR3 RAM */
+	MEM_RDDR3,		/* Registered DDR3 RAM */
 };
 
 #define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
@@ -167,6 +169,8 @@
 #define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
 #define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
 #define MEM_FLAG_XDR            BIT(MEM_XDR)
+#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
 
 /* chipset Error Detection and Correction capabilities and mode */
 enum edac_type {
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index ad218fe..e1d4ce0 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -94,7 +94,9 @@
 	[MEM_DDR2] = "Unbuffered-DDR2",
 	[MEM_FB_DDR2] = "FullyBuffered-DDR2",
 	[MEM_RDDR2] = "Registered-DDR2",
-	[MEM_XDR] = "XDR"
+	[MEM_XDR] = "XDR",
+	[MEM_DDR3] = "Unbuffered-DDR3",
+	[MEM_RDDR3] = "Registered-DDR3"
 };
 
 static const char *dev_types[] = {
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 7c8c2d7..3f2ccfc 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -757,6 +757,9 @@
 		case DSC_SDTYPE_DDR2:
 			mtype = MEM_RDDR2;
 			break;
+		case DSC_SDTYPE_DDR3:
+			mtype = MEM_RDDR3;
+			break;
 		default:
 			mtype = MEM_UNKNOWN;
 			break;
@@ -769,6 +772,9 @@
 		case DSC_SDTYPE_DDR2:
 			mtype = MEM_DDR2;
 			break;
+		case DSC_SDTYPE_DDR3:
+			mtype = MEM_DDR3;
+			break;
 		default:
 			mtype = MEM_UNKNOWN;
 			break;
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
index 135b353..52432ee 100644
--- a/drivers/edac/mpc85xx_edac.h
+++ b/drivers/edac/mpc85xx_edac.h
@@ -53,6 +53,7 @@
 
 #define DSC_SDTYPE_DDR		0x02000000
 #define DSC_SDTYPE_DDR2		0x03000000
+#define DSC_SDTYPE_DDR3		0x07000000
 #define DSC_X32_EN	0x00000020
 
 /* Err_Int_En */
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index aa8e7cb..4ee4c83 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -109,6 +109,16 @@
 	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
 }
 
+static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
+
+	if (chip->irq_base == (unsigned) -1)
+		return -EINVAL;
+
+	return chip->irq_base + offset;
+}
+
 /*
  * PL061 GPIO IRQ
  */
@@ -200,7 +210,7 @@
 	desc->chip->ack(irq);
 	list_for_each(ptr, chip_list) {
 		unsigned long pending;
-		int gpio;
+		int offset;
 
 		chip = list_entry(ptr, struct pl061_gpio, list);
 		pending = readb(chip->base + GPIOMIS);
@@ -209,8 +219,8 @@
 		if (pending == 0)
 			continue;
 
-		for_each_bit(gpio, &pending, PL061_GPIO_NR)
-			generic_handle_irq(gpio_to_irq(gpio));
+		for_each_bit(offset, &pending, PL061_GPIO_NR)
+			generic_handle_irq(pl061_to_irq(&chip->gc, offset));
 	}
 	desc->chip->unmask(irq);
 }
@@ -221,7 +231,7 @@
 	struct pl061_gpio *chip;
 	struct list_head *chip_list;
 	int ret, irq, i;
-	static unsigned long init_irq[BITS_TO_LONGS(NR_IRQS)];
+	static DECLARE_BITMAP(init_irq, NR_IRQS);
 
 	pdata = dev->dev.platform_data;
 	if (pdata == NULL)
@@ -251,6 +261,7 @@
 	chip->gc.direction_output = pl061_direction_output;
 	chip->gc.get = pl061_get_value;
 	chip->gc.set = pl061_set_value;
+	chip->gc.to_irq = pl061_to_irq;
 	chip->gc.base = pdata->gpio_base;
 	chip->gc.ngpio = PL061_GPIO_NR;
 	chip->gc.label = dev_name(&dev->dev);
@@ -280,6 +291,7 @@
 	if (!test_and_set_bit(irq, init_irq)) { /* list initialized? */
 		chip_list = kmalloc(sizeof(*chip_list), GFP_KERNEL);
 		if (chip_list == NULL) {
+			clear_bit(irq, init_irq);
 			ret = -ENOMEM;
 			goto iounmap;
 		}
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c961fe4..39b393d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -81,6 +81,7 @@
 
 config DRM_I915
 	tristate "i915 driver"
+	depends on AGP_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4e89ab0..fe23f29 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -16,6 +16,7 @@
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 
 obj-$(CONFIG_DRM)	+= drm.o
+obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
 obj-$(CONFIG_DRM_R128)	+= r128/
 obj-$(CONFIG_DRM_RADEON)+= radeon/
@@ -26,4 +27,3 @@
 obj-$(CONFIG_DRM_SIS)   += sis/
 obj-$(CONFIG_DRM_SAVAGE)+= savage/
 obj-$(CONFIG_DRM_VIA)	+=via/
-obj-$(CONFIG_DRM_TTM)	+= ttm/
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 7d08352..80cc6d0 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -294,10 +294,10 @@
 	unsigned vactive = (pt->vactive_vblank_hi & 0xf0) << 4 | pt->vactive_lo;
 	unsigned hblank = (pt->hactive_hblank_hi & 0xf) << 8 | pt->hblank_lo;
 	unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
-	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 8 | pt->hsync_offset_lo;
-	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 6 | pt->hsync_pulse_width_lo;
-	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) | (pt->vsync_offset_pulse_width_lo & 0xf);
-	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
+	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
+	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
 
 	/* ignore tiny modes */
 	if (hactive < 64 || vactive < 64)
@@ -347,8 +347,8 @@
 	mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ?
 		DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
 
-	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
-	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
+	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
 
 	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
 		mode->width_mm *= 10;
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 51c5a05..30d6b99 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -13,6 +13,8 @@
 	  intel_crt.o \
 	  intel_lvds.o \
 	  intel_bios.o \
+	  intel_dp.o \
+	  intel_dp_i2c.o \
 	  intel_hdmi.o \
 	  intel_sdvo.o \
 	  intel_modes.o \
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index e747ac4..288fc50 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -37,7 +37,7 @@
 	/* GPIO register used for i2c bus to control this device */
 	u32 gpio;
 	int slave_addr;
-	struct intel_i2c_chan *i2c_bus;
+	struct i2c_adapter *i2c_bus;
 
 	const struct intel_dvo_dev_ops *dev_ops;
 	void *dev_priv;
@@ -52,7 +52,7 @@
 	 * Returns NULL if the device does not exist.
 	 */
 	bool (*init)(struct intel_dvo_device *dvo,
-		     struct intel_i2c_chan *i2cbus);
+		     struct i2c_adapter *i2cbus);
 
 	/*
 	 * Called to allow the output a chance to create properties after the
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index 03d4b49..621815b 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -176,19 +176,20 @@
 
 static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
 {
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -208,10 +209,11 @@
 
 static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
 {
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -228,8 +230,9 @@
 
 /** Probes for a CH7017 on the given bus and slave address. */
 static bool ch7017_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	struct ch7017_priv *priv;
 	uint8_t val;
 
@@ -237,8 +240,7 @@
 	if (priv == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = priv;
 
 	if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
@@ -248,7 +250,7 @@
 	    val != CH7018_DEVICE_ID_VALUE &&
 	    val != CH7019_DEVICE_ID_VALUE) {
 		DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
-			  val, i2cbus->adapter.name,i2cbus->slave_addr);
+			  val, i2cbus->adapter.name,dvo->slave_addr);
 		goto fail;
 	}
 
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
index d2fd95d..a9b8962 100644
--- a/drivers/gpu/drm/i915/dvo_ch7xxx.c
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -123,19 +123,20 @@
 static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -152,7 +153,7 @@
 
 	if (!ch7xxx->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -161,10 +162,11 @@
 static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -178,14 +180,14 @@
 
 	if (!ch7xxx->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
 }
 
 static bool ch7xxx_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the CH7xxx chip on the specified i2c bus */
 	struct ch7xxx_priv *ch7xxx;
@@ -196,8 +198,7 @@
 	if (ch7xxx == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = ch7xxx;
 	ch7xxx->quiet = true;
 
@@ -207,7 +208,7 @@
 	name = ch7xxx_get_id(vendor);
 	if (!name) {
 		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
-			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+			  vendor, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
@@ -217,7 +218,7 @@
 
 	if (device != CH7xxx_DID) {
 		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
-			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+			  vendor, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
index 0c8d375..aa176f9 100644
--- a/drivers/gpu/drm/i915/dvo_ivch.c
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -169,13 +169,14 @@
 static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
 {
 	struct ivch_priv *priv = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[1];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 0,
 		},
@@ -186,7 +187,7 @@
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD | I2C_M_NOSTART,
 			.len = 2,
 			.buf = in_buf,
@@ -202,7 +203,7 @@
 
 	if (!priv->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -211,10 +212,11 @@
 static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
 {
 	struct ivch_priv *priv = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[3];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 3,
 		.buf = out_buf,
@@ -229,7 +231,7 @@
 
 	if (!priv->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -237,7 +239,7 @@
 
 /** Probes the given bus and slave address for an ivch */
 static bool ivch_init(struct intel_dvo_device *dvo,
-		      struct intel_i2c_chan *i2cbus)
+		      struct i2c_adapter *adapter)
 {
 	struct ivch_priv *priv;
 	uint16_t temp;
@@ -246,8 +248,7 @@
 	if (priv == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = priv;
 	priv->quiet = true;
 
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
index 033a4bb..e1c1f73 100644
--- a/drivers/gpu/drm/i915/dvo_sil164.c
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -76,19 +76,20 @@
 static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct sil164_priv *sil = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -105,7 +106,7 @@
 
 	if (!sil->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -113,10 +114,11 @@
 static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct sil164_priv *sil= dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -130,7 +132,7 @@
 
 	if (!sil->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -138,7 +140,7 @@
 
 /* Silicon Image 164 driver for chip on i2c bus */
 static bool sil164_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the SIL164 chip on the specified i2c bus */
 	struct sil164_priv *sil;
@@ -148,8 +150,7 @@
 	if (sil == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = sil;
 	sil->quiet = true;
 
@@ -158,7 +159,7 @@
 
 	if (ch != (SIL164_VID & 0xff)) {
 		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
-			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+			  ch, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
@@ -167,7 +168,7 @@
 
 	if (ch != (SIL164_DID & 0xff)) {
 		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
-			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+			  ch, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 	sil->quiet = false;
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
index 207fda8..9ecc907 100644
--- a/drivers/gpu/drm/i915/dvo_tfp410.c
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -101,19 +101,20 @@
 static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
 {
 	struct tfp410_priv *tfp = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	u8 out_buf[2];
 	u8 in_buf[2];
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = i2cbus->slave_addr,
+			.addr = dvo->slave_addr,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = in_buf,
@@ -130,7 +131,7 @@
 
 	if (!tfp->quiet) {
 		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 	return false;
 }
@@ -138,10 +139,11 @@
 static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
 {
 	struct tfp410_priv *tfp = dvo->dev_priv;
-	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	struct i2c_adapter *adapter = dvo->i2c_bus;
+	struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
 	uint8_t out_buf[2];
 	struct i2c_msg msg = {
-		.addr = i2cbus->slave_addr,
+		.addr = dvo->slave_addr,
 		.flags = 0,
 		.len = 2,
 		.buf = out_buf,
@@ -155,7 +157,7 @@
 
 	if (!tfp->quiet) {
 		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
-			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+			  addr, i2cbus->adapter.name, dvo->slave_addr);
 	}
 
 	return false;
@@ -174,7 +176,7 @@
 
 /* Ti TFP410 driver for chip on i2c bus */
 static bool tfp410_init(struct intel_dvo_device *dvo,
-			struct intel_i2c_chan *i2cbus)
+			struct i2c_adapter *adapter)
 {
 	/* this will detect the tfp410 chip on the specified i2c bus */
 	struct tfp410_priv *tfp;
@@ -184,20 +186,19 @@
 	if (tfp == NULL)
 		return false;
 
-	dvo->i2c_bus = i2cbus;
-	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->i2c_bus = adapter;
 	dvo->dev_priv = tfp;
 	tfp->quiet = true;
 
 	if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
 		DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
-			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+			  id, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 
 	if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
 		DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
-			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+			  id, adapter->name, dvo->slave_addr);
 		goto out;
 	}
 	tfp->quiet = false;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 98560e1..e3cb402 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -67,8 +67,6 @@
 
 	pci_save_state(dev->pdev);
 
-	i915_save_state(dev);
-
 	/* If KMS is active, we do the leavevt stuff here */
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		if (i915_gem_idle(dev))
@@ -77,6 +75,8 @@
 		drm_irq_uninstall(dev);
 	}
 
+	i915_save_state(dev);
+
 	intel_opregion_free(dev, 1);
 
 	if (state.event == PM_EVENT_SUSPEND) {
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a84f04..bb4c2d3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -306,6 +306,17 @@
 	u32 saveCURBPOS;
 	u32 saveCURBBASE;
 	u32 saveCURSIZE;
+	u32 saveDP_B;
+	u32 saveDP_C;
+	u32 saveDP_D;
+	u32 savePIPEA_GMCH_DATA_M;
+	u32 savePIPEB_GMCH_DATA_M;
+	u32 savePIPEA_GMCH_DATA_N;
+	u32 savePIPEB_GMCH_DATA_N;
+	u32 savePIPEA_DP_LINK_M;
+	u32 savePIPEB_DP_LINK_M;
+	u32 savePIPEA_DP_LINK_N;
+	u32 savePIPEB_DP_LINK_N;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -857,6 +868,7 @@
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index fd2b8bd..876b65c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1006,7 +1006,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 #if WATCH_BUF
-	DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
+	DRM_INFO("set_domain_ioctl %p(%zd), %08x %08x\n",
 		 obj, obj->size, read_domains, write_domain);
 #endif
 	if (read_domains & I915_GEM_DOMAIN_GTT) {
@@ -1050,7 +1050,7 @@
 	}
 
 #if WATCH_BUF
-	DRM_INFO("%s: sw_finish %d (%p %d)\n",
+	DRM_INFO("%s: sw_finish %d (%p %zd)\n",
 		 __func__, args->handle, obj, obj->size);
 #endif
 	obj_priv = obj->driver_private;
@@ -2423,7 +2423,7 @@
 	}
 
 #if WATCH_BUF
-	DRM_INFO("Binding object of size %d at 0x%08x\n",
+	DRM_INFO("Binding object of size %zd at 0x%08x\n",
 		 obj->size, obj_priv->gtt_offset);
 #endif
 	ret = i915_gem_object_get_pages(obj);
@@ -4227,6 +4227,7 @@
 void
 i915_gem_load(struct drm_device *dev)
 {
+	int i;
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	spin_lock_init(&dev_priv->mm.active_list_lock);
@@ -4246,6 +4247,18 @@
 	else
 		dev_priv->num_fence_regs = 8;
 
+	/* Initialize fence registers to zero */
+	if (IS_I965G(dev)) {
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_965_0 + (i * 8), 0);
+	} else {
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), 0);
+		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+			for (i = 0; i < 8; i++)
+				I915_WRITE(FENCE_REG_945_8 + (i * 4), 0);
+	}
+
 	i915_gem_detect_bit_6_swizzle(dev);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c
index 8d0b943..e602614 100644
--- a/drivers/gpu/drm/i915/i915_gem_debug.c
+++ b/drivers/gpu/drm/i915/i915_gem_debug.c
@@ -87,7 +87,7 @@
 			chunk_len = page_len - chunk;
 			if (chunk_len > 128)
 				chunk_len = 128;
-			i915_gem_dump_page(obj_priv->page_list[page],
+			i915_gem_dump_page(obj_priv->pages[page],
 					   chunk, chunk + chunk_len,
 					   obj_priv->gtt_offset +
 					   page * PAGE_SIZE,
@@ -143,7 +143,7 @@
 	uint32_t *backing_map = NULL;
 	int bad_count = 0;
 
-	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n",
+	DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %zdkb):\n",
 		 __func__, obj, obj_priv->gtt_offset, handle,
 		 obj->size / 1024);
 
@@ -157,7 +157,7 @@
 	for (page = 0; page < obj->size / PAGE_SIZE; page++) {
 		int i;
 
-		backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0);
+		backing_map = kmap_atomic(obj_priv->pages[page], KM_USER0);
 
 		if (backing_map == NULL) {
 			DRM_ERROR("failed to map backing page\n");
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 5c1ceec..daeae62 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -114,11 +114,13 @@
 	mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
 
 	/* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
 	if (mchbar_addr &&
 	    pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
 		ret = 0;
 		goto out_put;
 	}
+#endif
 
 	/* Get some space for it */
 	ret = pci_bus_alloc_resource(bridge_dev->bus, &dev_priv->mch_res,
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b86b7b7..228546f 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -232,7 +232,17 @@
 	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
 						    hotplug_work);
 	struct drm_device *dev = dev_priv->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
 
+	if (mode_config->num_connector) {
+		list_for_each_entry(connector, &mode_config->connector_list, head) {
+			struct intel_output *intel_output = to_intel_output(connector);
+	
+			if (intel_output->hot_plug)
+				(*intel_output->hot_plug) (intel_output);
+		}
+	}
 	/* Just fire off a uevent and let userspace tell us what to do */
 	drm_sysfs_hotplug_event(dev);
 }
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f6237a0..88bf752 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -569,6 +569,19 @@
 #define C0DRB3			0x10206
 #define C1DRB3			0x10606
 
+/* Clocking configuration register */
+#define CLKCFG			0x10c00
+#define CLKCFG_FSB_400					(0 << 0)	/* hrawclk 100 */
+#define CLKCFG_FSB_533					(1 << 0)	/* hrawclk 133 */
+#define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
+#define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
+#define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
+#define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
+/* this is a guess, could be 5 as well */
+#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_1600_ALT				(5 << 0)	/* hrawclk 400 */
+#define CLKCFG_FSB_MASK					(7 << 0)
+ 
 /** GM965 GM45 render standby register */
 #define MCHBAR_RENDER_STANDBY	0x111B8
 
@@ -834,9 +847,25 @@
 #define   HORIZ_INTERP_MASK	(3 << 6)
 #define   HORIZ_AUTO_SCALE	(1 << 5)
 #define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define   PFIT_FILTER_FUZZY	(0 << 24)
+#define   PFIT_SCALING_AUTO	(0 << 26)
+#define   PFIT_SCALING_PROGRAMMED (1 << 26)
+#define   PFIT_SCALING_PILLAR	(2 << 26)
+#define   PFIT_SCALING_LETTER	(3 << 26)
 #define PFIT_PGM_RATIOS	0x61234
 #define   PFIT_VERT_SCALE_MASK			0xfff00000
 #define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
+/* Pre-965 */
+#define		PFIT_VERT_SCALE_SHIFT		20
+#define		PFIT_VERT_SCALE_MASK		0xfff00000
+#define		PFIT_HORIZ_SCALE_SHIFT		4
+#define		PFIT_HORIZ_SCALE_MASK		0x0000fff0
+/* 965+ */
+#define		PFIT_VERT_SCALE_SHIFT_965	16
+#define		PFIT_VERT_SCALE_MASK_965	0x1fff0000
+#define		PFIT_HORIZ_SCALE_SHIFT_965	0
+#define		PFIT_HORIZ_SCALE_MASK_965	0x00001fff
+
 #define PFIT_AUTO_RATIOS 0x61238
 
 /* Backlight control */
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index a98e283..8d8e083 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -322,6 +322,20 @@
 	dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
 	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		dev_priv->saveDP_B = I915_READ(DP_B);
+		dev_priv->saveDP_C = I915_READ(DP_C);
+		dev_priv->saveDP_D = I915_READ(DP_D);
+		dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+		dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+		dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+		dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+		dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+		dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+		dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+		dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+	}
 	/* FIXME: save TV & SDVO state */
 
 	/* FBC state */
@@ -404,7 +418,19 @@
 			for (i = 0; i < 8; i++)
 				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
 	}
-
+	
+	/* Display port ratios (must be done before clock is set) */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+		I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+		I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+		I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+		I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+		I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+		I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+		I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+	}
+	
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -518,6 +544,12 @@
 	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
 	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(DP_B, dev_priv->saveDP_B);
+		I915_WRITE(DP_C, dev_priv->saveDP_C);
+		I915_WRITE(DP_D, dev_priv->saveDP_D);
+	}
 	/* FIXME: restore TV & SDVO state */
 
 	/* FBC info */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index cdd126d..716409a 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -99,9 +99,11 @@
 {
 	struct bdb_lvds_options *lvds_options;
 	struct bdb_lvds_lfp_data *lvds_lfp_data;
+	struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
 	struct bdb_lvds_lfp_data_entry *entry;
 	struct lvds_dvo_timing *dvo_timing;
 	struct drm_display_mode *panel_fixed_mode;
+	int lfp_data_size;
 
 	/* Defaults if we can't find VBT info */
 	dev_priv->lvds_dither = 0;
@@ -119,9 +121,17 @@
 	if (!lvds_lfp_data)
 		return;
 
+	lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
+	if (!lvds_lfp_data_ptrs)
+		return;
+
 	dev_priv->lvds_vbt = 1;
 
-	entry = &lvds_lfp_data->data[lvds_options->panel_type];
+	lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
+		lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
+	entry = (struct bdb_lvds_lfp_data_entry *)
+		((uint8_t *)lvds_lfp_data->data + (lfp_data_size *
+						   lvds_options->panel_type));
 	dvo_timing = &entry->dvo_timing;
 
 	panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3e1c781..73e7b9c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -29,6 +29,7 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include "intel_dp.h"
 
 #include "drm_crtc_helper.h"
 
@@ -127,19 +128,6 @@
 #define I9XX_P2_LVDS_FAST		      7
 #define I9XX_P2_LVDS_SLOW_LIMIT		 112000
 
-#define INTEL_LIMIT_I8XX_DVO_DAC    0
-#define INTEL_LIMIT_I8XX_LVDS	    1
-#define INTEL_LIMIT_I9XX_SDVO_DAC   2
-#define INTEL_LIMIT_I9XX_LVDS	    3
-#define INTEL_LIMIT_G4X_SDVO	    4
-#define INTEL_LIMIT_G4X_HDMI_DAC   5
-#define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS   6
-#define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS   7
-#define INTEL_LIMIT_IGD_SDVO_DAC    8
-#define INTEL_LIMIT_IGD_LVDS	    9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC  10
-#define INTEL_LIMIT_IGDNG_LVDS	    11
-
 /*The parameter is for SDVO on G4x platform*/
 #define G4X_DOT_SDVO_MIN           25000
 #define G4X_DOT_SDVO_MAX           270000
@@ -218,6 +206,25 @@
 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN           161670
+#define G4X_DOT_DISPLAY_PORT_MAX           227000
+#define G4X_N_DISPLAY_PORT_MIN             1
+#define G4X_N_DISPLAY_PORT_MAX             2
+#define G4X_M_DISPLAY_PORT_MIN             97
+#define G4X_M_DISPLAY_PORT_MAX             108
+#define G4X_M1_DISPLAY_PORT_MIN            0x10
+#define G4X_M1_DISPLAY_PORT_MAX            0x12
+#define G4X_M2_DISPLAY_PORT_MIN            0x05
+#define G4X_M2_DISPLAY_PORT_MAX            0x06
+#define G4X_P_DISPLAY_PORT_MIN             10
+#define G4X_P_DISPLAY_PORT_MAX             20
+#define G4X_P1_DISPLAY_PORT_MIN            1
+#define G4X_P1_DISPLAY_PORT_MAX            2
+#define G4X_P2_DISPLAY_PORT_SLOW           10
+#define G4X_P2_DISPLAY_PORT_FAST           10
+#define G4X_P2_DISPLAY_PORT_LIMIT          0
+
 /* IGDNG */
 /* as we calculate clock using (register_value + 2) for
    N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,8 +263,11 @@
 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
 
-static const intel_limit_t intel_limits[] = {
-    { /* INTEL_LIMIT_I8XX_DVO_DAC */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock);
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
         .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
         .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
@@ -269,8 +279,9 @@
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I8XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
         .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
         .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
@@ -282,8 +293,9 @@
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+};
+	
+static const intel_limit_t intel_limits_i9xx_sdvo = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
         .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
@@ -295,8 +307,9 @@
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_I9XX_LVDS */
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
         .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
@@ -311,9 +324,10 @@
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
+};
+
     /* below parameter and function is for G4X Chipset Family*/
-    { /* INTEL_LIMIT_G4X_SDVO */
+static const intel_limit_t intel_limits_g4x_sdvo = {
 	.dot = { .min = G4X_DOT_SDVO_MIN,	.max = G4X_DOT_SDVO_MAX },
 	.vco = { .min = G4X_VCO_MIN,	        .max = G4X_VCO_MAX},
 	.n   = { .min = G4X_N_SDVO_MIN,	        .max = G4X_N_SDVO_MAX },
@@ -327,8 +341,9 @@
 		 .p2_fast = G4X_P2_SDVO_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_HDMI_DAC */
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
 	.dot = { .min = G4X_DOT_HDMI_DAC_MIN,	.max = G4X_DOT_HDMI_DAC_MAX },
 	.vco = { .min = G4X_VCO_MIN,	        .max = G4X_VCO_MAX},
 	.n   = { .min = G4X_N_HDMI_DAC_MIN,	.max = G4X_N_HDMI_DAC_MAX },
@@ -342,8 +357,9 @@
 		 .p2_fast = G4X_P2_HDMI_DAC_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
 	.dot = { .min = G4X_DOT_SINGLE_CHANNEL_LVDS_MIN,
 		 .max = G4X_DOT_SINGLE_CHANNEL_LVDS_MAX },
 	.vco = { .min = G4X_VCO_MIN,
@@ -365,8 +381,9 @@
 		 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS */
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
 	.dot = { .min = G4X_DOT_DUAL_CHANNEL_LVDS_MIN,
 		 .max = G4X_DOT_DUAL_CHANNEL_LVDS_MAX },
 	.vco = { .min = G4X_VCO_MIN,
@@ -388,8 +405,32 @@
 		 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGD_SDVO */
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+        .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+                 .max = G4X_DOT_DISPLAY_PORT_MAX },
+        .vco = { .min = G4X_VCO_MIN,
+                 .max = G4X_VCO_MAX},
+        .n   = { .min = G4X_N_DISPLAY_PORT_MIN,
+                 .max = G4X_N_DISPLAY_PORT_MAX },
+        .m   = { .min = G4X_M_DISPLAY_PORT_MIN,
+                 .max = G4X_M_DISPLAY_PORT_MAX },
+        .m1  = { .min = G4X_M1_DISPLAY_PORT_MIN,
+                 .max = G4X_M1_DISPLAY_PORT_MAX },
+        .m2  = { .min = G4X_M2_DISPLAY_PORT_MIN,
+                 .max = G4X_M2_DISPLAY_PORT_MAX },
+        .p   = { .min = G4X_P_DISPLAY_PORT_MIN,
+                 .max = G4X_P_DISPLAY_PORT_MAX },
+        .p1  = { .min = G4X_P1_DISPLAY_PORT_MIN,
+                 .max = G4X_P1_DISPLAY_PORT_MAX},
+        .p2  = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+                 .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+                 .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+        .find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_igd_sdvo = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX},
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
         .n   = { .min = IGD_N_MIN,		.max = IGD_N_MAX },
@@ -401,8 +442,9 @@
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGD_LVDS */
+};
+
+static const intel_limit_t intel_limits_igd_lvds = {
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
         .n   = { .min = IGD_N_MIN,		.max = IGD_N_MAX },
@@ -415,8 +457,9 @@
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGDNG_SDVO_DAC */
+};
+
+static const intel_limit_t intel_limits_igdng_sdvo = {
 	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
 	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
 	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
@@ -429,8 +472,9 @@
 		 .p2_slow = IGDNG_P2_SDVO_DAC_SLOW,
 		 .p2_fast = IGDNG_P2_SDVO_DAC_FAST },
 	.find_pll = intel_igdng_find_best_PLL,
-    },
-    { /* INTEL_LIMIT_IGDNG_LVDS */
+};
+
+static const intel_limit_t intel_limits_igdng_lvds = {
 	.dot = { .min = IGDNG_DOT_MIN,          .max = IGDNG_DOT_MAX },
 	.vco = { .min = IGDNG_VCO_MIN,          .max = IGDNG_VCO_MAX },
 	.n   = { .min = IGDNG_N_MIN,            .max = IGDNG_N_MAX },
@@ -443,16 +487,15 @@
 		 .p2_slow = IGDNG_P2_LVDS_SLOW,
 		 .p2_fast = IGDNG_P2_LVDS_FAST },
 	.find_pll = intel_igdng_find_best_PLL,
-    },
 };
 
 static const intel_limit_t *intel_igdng_limit(struct drm_crtc *crtc)
 {
 	const intel_limit_t *limit;
 	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		limit = &intel_limits[INTEL_LIMIT_IGDNG_LVDS];
+		limit = &intel_limits_igdng_lvds;
 	else
-		limit = &intel_limits[INTEL_LIMIT_IGDNG_SDVO_DAC];
+		limit = &intel_limits_igdng_sdvo;
 
 	return limit;
 }
@@ -467,19 +510,19 @@
 		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
 		    LVDS_CLKB_POWER_UP)
 			/* LVDS with dual channel */
-			limit = &intel_limits
-					[INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS];
+			limit = &intel_limits_g4x_dual_channel_lvds;
 		else
 			/* LVDS with dual channel */
-			limit = &intel_limits
-					[INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS];
+			limit = &intel_limits_g4x_single_channel_lvds;
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
 		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
-		limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
+		limit = &intel_limits_g4x_hdmi;
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
-		limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+		limit = &intel_limits_g4x_sdvo;
+	} else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		limit = &intel_limits_g4x_display_port;
 	} else /* The option is for other outputs */
-		limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+		limit = &intel_limits_i9xx_sdvo;
 
 	return limit;
 }
@@ -495,19 +538,19 @@
 		limit = intel_g4x_limit(crtc);
 	} else if (IS_I9XX(dev) && !IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+			limit = &intel_limits_i9xx_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+			limit = &intel_limits_i9xx_sdvo;
 	} else if (IS_IGD(dev)) {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_IGD_LVDS];
+			limit = &intel_limits_igd_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_IGD_SDVO_DAC];
+			limit = &intel_limits_igd_sdvo;
 	} else {
 		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-			limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+			limit = &intel_limits_i8xx_lvds;
 		else
-			limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+			limit = &intel_limits_i8xx_dvo;
 	}
 	return limit;
 }
@@ -764,6 +807,35 @@
 	return found;
 }
 
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock)
+{
+    intel_clock_t clock;
+    if (target < 200000) {
+	clock.dot = 161670;
+	clock.p = 20;
+	clock.p1 = 2;
+	clock.p2 = 10;
+	clock.n = 0x01;
+	clock.m = 97;
+	clock.m1 = 0x10;
+	clock.m2 = 0x05;
+    } else {
+	clock.dot = 270000;
+	clock.p = 10;
+	clock.p1 = 1;
+	clock.p2 = 10;
+	clock.n = 0x02;
+	clock.m = 108;
+	clock.m1 = 0x12;
+	clock.m2 = 0x06;
+    }
+    memcpy(best_clock, &clock, sizeof(intel_clock_t));
+    return true;
+}
+
 void
 intel_wait_for_vblank(struct drm_device *dev)
 {
@@ -1541,7 +1613,7 @@
 	intel_clock_t clock;
 	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
 	bool ok, is_sdvo = false, is_dvo = false;
-	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 	const intel_limit_t *limit;
@@ -1585,6 +1657,9 @@
 		case INTEL_OUTPUT_ANALOG:
 			is_crt = true;
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
 		}
 
 		num_outputs++;
@@ -1600,6 +1675,7 @@
 	} else {
 		refclk = 48000;
 	}
+	
 
 	/*
 	 * Returns a set of divisors for the desired target clock with the given
@@ -1662,6 +1738,8 @@
 			else if (IS_IGDNG(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
 
 		/* compute bitmask from p1 value */
 		if (IS_IGD(dev))
@@ -1809,6 +1887,8 @@
 		I915_WRITE(lvds_reg, lvds);
 		I915_READ(lvds_reg);
 	}
+	if (is_dp)
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
 	I915_WRITE(fp_reg, fp);
 	I915_WRITE(dpll_reg, dpll);
@@ -2475,6 +2555,8 @@
 			found = intel_sdvo_init(dev, SDVOB);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOB);
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_B);
 		}
 
 		/* Before G4X SDVOC doesn't have its own detect register */
@@ -2487,7 +2569,11 @@
 			found = intel_sdvo_init(dev, SDVOC);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOC);
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_C);
 		}
+		if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+			intel_dp_init(dev, DP_D);
 	} else
 		intel_dvo_init(dev);
 
@@ -2530,6 +2616,11 @@
 				     (1 << 1));
 			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			crtc_mask = ((1 << 0) |
+				     (1 << 1));
+			clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+			break;
 		}
 		encoder->possible_crtcs = crtc_mask;
 		encoder->possible_clones = intel_connector_clones(dev, clone_mask);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
new file mode 100644
index 0000000..8f8d37d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -0,0 +1,1153 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Keith Packard <keithp@keithp.com>
+ *
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_dp.h"
+
+#define DP_LINK_STATUS_SIZE	6
+#define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
+
+#define DP_LINK_CONFIGURATION_SIZE	9
+
+struct intel_dp_priv {
+	uint32_t output_reg;
+	uint32_t DP;
+	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	uint32_t save_DP;
+	uint8_t  save_link_configuration[DP_LINK_CONFIGURATION_SIZE];
+	bool has_audio;
+	int dpms_mode;
+	uint8_t link_bw;
+	uint8_t lane_count;
+	uint8_t dpcd[4];
+	struct intel_output *intel_output;
+	struct i2c_adapter adapter;
+	struct i2c_algo_dp_aux_data algo;
+};
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+
+static int
+intel_dp_max_lane_count(struct intel_output *intel_output)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int max_lane_count = 4;
+
+	if (dp_priv->dpcd[0] >= 0x11) {
+		max_lane_count = dp_priv->dpcd[2] & 0x1f;
+		switch (max_lane_count) {
+		case 1: case 2: case 4:
+			break;
+		default:
+			max_lane_count = 4;
+		}
+	}
+	return max_lane_count;
+}
+
+static int
+intel_dp_max_link_bw(struct intel_output *intel_output)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int max_link_bw = dp_priv->dpcd[1];
+
+	switch (max_link_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+		break;
+	default:
+		max_link_bw = DP_LINK_BW_1_62;
+		break;
+	}
+	return max_link_bw;
+}
+
+static int
+intel_dp_link_clock(uint8_t link_bw)
+{
+	if (link_bw == DP_LINK_BW_2_7)
+		return 270000;
+	else
+		return 162000;
+}
+
+/* I think this is a fiction */
+static int
+intel_dp_link_required(int pixel_clock)
+{
+	return pixel_clock * 3;
+}
+
+static int
+intel_dp_mode_valid(struct drm_connector *connector,
+		    struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
+	int max_lanes = intel_dp_max_lane_count(intel_output);
+
+	if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
+	return MODE_OK;
+}
+
+static uint32_t
+pack_aux(uint8_t *src, int src_bytes)
+{
+	int	i;
+	uint32_t v = 0;
+
+	if (src_bytes > 4)
+		src_bytes = 4;
+	for (i = 0; i < src_bytes; i++)
+		v |= ((uint32_t) src[i]) << ((3-i) * 8);
+	return v;
+}
+
+static void
+unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes)
+{
+	int i;
+	if (dst_bytes > 4)
+		dst_bytes = 4;
+	for (i = 0; i < dst_bytes; i++)
+		dst[i] = src >> ((3-i) * 8);
+}
+
+/* hrawclock is 1/4 the FSB frequency */
+static int
+intel_hrawclk(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t clkcfg;
+
+	clkcfg = I915_READ(CLKCFG);
+	switch (clkcfg & CLKCFG_FSB_MASK) {
+	case CLKCFG_FSB_400:
+		return 100;
+	case CLKCFG_FSB_533:
+		return 133;
+	case CLKCFG_FSB_667:
+		return 166;
+	case CLKCFG_FSB_800:
+		return 200;
+	case CLKCFG_FSB_1067:
+		return 266;
+	case CLKCFG_FSB_1333:
+		return 333;
+	/* these two are just a guess; one of them might be right */
+	case CLKCFG_FSB_1600:
+	case CLKCFG_FSB_1600_ALT:
+		return 400;
+	default:
+		return 133;
+	}
+}
+
+static int
+intel_dp_aux_ch(struct intel_output *intel_output,
+		uint8_t *send, int send_bytes,
+		uint8_t *recv, int recv_size)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint32_t output_reg = dp_priv->output_reg;
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t ch_ctl = output_reg + 0x10;
+	uint32_t ch_data = ch_ctl + 4;
+	int i;
+	int recv_bytes;
+	uint32_t ctl;
+	uint32_t status;
+	uint32_t aux_clock_divider;
+	int try;
+
+	/* The clock divider is based off the hrawclk,
+	 * and would like to run at 2MHz. So, take the
+	 * hrawclk value and divide by 2 and use that
+	 */
+	aux_clock_divider = intel_hrawclk(dev) / 2;
+	/* Must try at least 3 times according to DP spec */
+	for (try = 0; try < 5; try++) {
+		/* Load the send data into the aux channel data registers */
+		for (i = 0; i < send_bytes; i += 4) {
+			uint32_t    d = pack_aux(send + i, send_bytes - i);;
+	
+			I915_WRITE(ch_data + i, d);
+		}
+	
+		ctl = (DP_AUX_CH_CTL_SEND_BUSY |
+		       DP_AUX_CH_CTL_TIME_OUT_400us |
+		       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+		       (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
+		       (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |
+		       DP_AUX_CH_CTL_DONE |
+		       DP_AUX_CH_CTL_TIME_OUT_ERROR |
+		       DP_AUX_CH_CTL_RECEIVE_ERROR);
+	
+		/* Send the command and wait for it to complete */
+		I915_WRITE(ch_ctl, ctl);
+		(void) I915_READ(ch_ctl);
+		for (;;) {
+			udelay(100);
+			status = I915_READ(ch_ctl);
+			if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+				break;
+		}
+	
+		/* Clear done status and any errors */
+		I915_WRITE(ch_ctl, (ctl |
+				DP_AUX_CH_CTL_DONE |
+				DP_AUX_CH_CTL_TIME_OUT_ERROR |
+				DP_AUX_CH_CTL_RECEIVE_ERROR));
+		(void) I915_READ(ch_ctl);
+		if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)
+			break;
+	}
+
+	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
+		printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);
+		return -EBUSY;
+	}
+
+	/* Check for timeout or receive error.
+	 * Timeouts occur when the sink is not connected
+	 */
+	if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+		printk(KERN_ERR "dp_aux_ch receive error status 0x%08x\n", status);
+		return -EIO;
+	}
+	if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
+		printk(KERN_ERR "dp_aux_ch timeout status 0x%08x\n", status);
+		return -ETIMEDOUT;
+	}
+
+	/* Unload any bytes sent back from the other side */
+	recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >>
+		      DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
+
+	if (recv_bytes > recv_size)
+		recv_bytes = recv_size;
+	
+	for (i = 0; i < recv_bytes; i += 4) {
+		uint32_t    d = I915_READ(ch_data + i);
+
+		unpack_aux(d, recv + i, recv_bytes - i);
+	}
+
+	return recv_bytes;
+}
+
+/* Write data to the aux channel in native mode */
+static int
+intel_dp_aux_native_write(struct intel_output *intel_output,
+			  uint16_t address, uint8_t *send, int send_bytes)
+{
+	int ret;
+	uint8_t	msg[20];
+	int msg_bytes;
+	uint8_t	ack;
+
+	if (send_bytes > 16)
+		return -1;
+	msg[0] = AUX_NATIVE_WRITE << 4;
+	msg[1] = address >> 8;
+	msg[2] = address;
+	msg[3] = send_bytes - 1;
+	memcpy(&msg[4], send, send_bytes);
+	msg_bytes = send_bytes + 4;
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+		if (ret < 0)
+			return ret;
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
+			break;
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+	return send_bytes;
+}
+
+/* Write a single byte to the aux channel in native mode */
+static int
+intel_dp_aux_native_write_1(struct intel_output *intel_output,
+			    uint16_t address, uint8_t byte)
+{
+	return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+}
+
+/* read bytes from a native aux channel */
+static int
+intel_dp_aux_native_read(struct intel_output *intel_output,
+			 uint16_t address, uint8_t *recv, int recv_bytes)
+{
+	uint8_t msg[4];
+	int msg_bytes;
+	uint8_t reply[20];
+	int reply_bytes;
+	uint8_t ack;
+	int ret;
+
+	msg[0] = AUX_NATIVE_READ << 4;
+	msg[1] = address >> 8;
+	msg[2] = address & 0xff;
+	msg[3] = recv_bytes - 1;
+
+	msg_bytes = 4;
+	reply_bytes = recv_bytes + 1;
+
+	for (;;) {
+		ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+				      reply, reply_bytes);
+		if (ret == 0)
+			return -EPROTO;
+		if (ret < 0)
+			return ret;
+		ack = reply[0];
+		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) {
+			memcpy(recv, reply + 1, ret - 1);
+			return ret - 1;
+		}
+		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
+			udelay(100);
+		else
+			return -EIO;
+	}
+}
+
+static int
+intel_dp_i2c_aux_ch(struct i2c_adapter *adapter,
+		    uint8_t *send, int send_bytes,
+		    uint8_t *recv, int recv_bytes)
+{
+	struct intel_dp_priv *dp_priv = container_of(adapter,
+						     struct intel_dp_priv,
+						     adapter);
+	struct intel_output *intel_output = dp_priv->intel_output;
+
+	return intel_dp_aux_ch(intel_output,
+			       send, send_bytes, recv, recv_bytes);
+}
+
+static int
+intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+{
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+
+	DRM_ERROR("i2c_init %s\n", name);
+	dp_priv->algo.running = false;
+	dp_priv->algo.address = 0;
+	dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
+
+	memset(&dp_priv->adapter, '\0', sizeof (dp_priv->adapter));
+	dp_priv->adapter.owner = THIS_MODULE;
+	dp_priv->adapter.class = I2C_CLASS_DDC;
+	strncpy (dp_priv->adapter.name, name, sizeof dp_priv->adapter.name - 1);
+	dp_priv->adapter.name[sizeof dp_priv->adapter.name - 1] = '\0';
+	dp_priv->adapter.algo_data = &dp_priv->algo;
+	dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+	
+	return i2c_dp_aux_add_bus(&dp_priv->adapter);
+}
+
+static bool
+intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv   *dp_priv = intel_output->dev_priv;
+	int lane_count, clock;
+	int max_lane_count = intel_dp_max_lane_count(intel_output);
+	int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
+
+	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
+		for (clock = 0; clock <= max_clock; clock++) {
+			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
+
+			if (intel_dp_link_required(mode->clock) <= link_avail) {
+				dp_priv->link_bw = bws[clock];
+				dp_priv->lane_count = lane_count;
+				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
+				printk(KERN_ERR "link bw %02x lane count %d clock %d\n",
+				       dp_priv->link_bw, dp_priv->lane_count,
+				       adjusted_mode->clock);
+				return true;
+			}
+		}
+	}
+	return false;
+}
+
+struct intel_dp_m_n {
+	uint32_t	tu;
+	uint32_t	gmch_m;
+	uint32_t	gmch_n;
+	uint32_t	link_m;
+	uint32_t	link_n;
+};
+
+static void
+intel_reduce_ratio(uint32_t *num, uint32_t *den)
+{
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
+}
+
+static void
+intel_dp_compute_m_n(int bytes_per_pixel,
+		     int nlanes,
+		     int pixel_clock,
+		     int link_clock,
+		     struct intel_dp_m_n *m_n)
+{
+	m_n->tu = 64;
+	m_n->gmch_m = pixel_clock * bytes_per_pixel;
+	m_n->gmch_n = link_clock * nlanes;
+	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
+}
+
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int lane_count = 4;
+	struct intel_dp_m_n m_n;
+
+	/*
+	 * Find the lane count in the intel_output private
+	 */
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct intel_output *intel_output = to_intel_output(connector);
+		struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+		if (!connector->encoder || connector->encoder->crtc != crtc)
+			continue;
+
+		if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+			lane_count = dp_priv->lane_count;
+			break;
+		}
+	}
+
+	/*
+	 * Compute the GMCH and Link ratios. The '3' here is
+	 * the number of bytes_per_pixel post-LUT, which we always
+	 * set up for 8-bits of R/G/B, or 3 bytes total.
+	 */
+	intel_dp_compute_m_n(3, lane_count,
+			     mode->clock, adjusted_mode->clock, &m_n);
+
+	if (intel_crtc->pipe == 0) {
+		I915_WRITE(PIPEA_GMCH_DATA_M,
+		       ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+		       m_n.gmch_m);
+		I915_WRITE(PIPEA_GMCH_DATA_N,
+		       m_n.gmch_n);
+		I915_WRITE(PIPEA_DP_LINK_M, m_n.link_m);
+		I915_WRITE(PIPEA_DP_LINK_N, m_n.link_n);
+	} else {
+		I915_WRITE(PIPEB_GMCH_DATA_M,
+		       ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) |
+		       m_n.gmch_m);
+		I915_WRITE(PIPEB_GMCH_DATA_N,
+		       m_n.gmch_n);
+		I915_WRITE(PIPEB_DP_LINK_M, m_n.link_m);
+		I915_WRITE(PIPEB_DP_LINK_N, m_n.link_n);
+	}
+}
+
+static void
+intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	struct drm_crtc *crtc = intel_output->enc.crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	dp_priv->DP = (DP_LINK_TRAIN_OFF |
+			DP_VOLTAGE_0_4 |
+			DP_PRE_EMPHASIS_0 |
+			DP_SYNC_VS_HIGH |
+			DP_SYNC_HS_HIGH);
+
+	switch (dp_priv->lane_count) {
+	case 1:
+		dp_priv->DP |= DP_PORT_WIDTH_1;
+		break;
+	case 2:
+		dp_priv->DP |= DP_PORT_WIDTH_2;
+		break;
+	case 4:
+		dp_priv->DP |= DP_PORT_WIDTH_4;
+		break;
+	}
+	if (dp_priv->has_audio)
+		dp_priv->DP |= DP_AUDIO_OUTPUT_ENABLE;
+
+	memset(dp_priv->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
+	dp_priv->link_configuration[0] = dp_priv->link_bw;
+	dp_priv->link_configuration[1] = dp_priv->lane_count;
+
+	/*
+	 * Check for DPCD version > 1.1,
+	 * enable enahanced frame stuff in that case
+	 */
+	if (dp_priv->dpcd[0] >= 0x11) {
+		dp_priv->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
+		dp_priv->DP |= DP_ENHANCED_FRAMING;
+	}
+
+	if (intel_crtc->pipe == 1)
+		dp_priv->DP |= DP_PIPEB_SELECT;
+}
+
+
+static void
+intel_dp_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t dp_reg = I915_READ(dp_priv->output_reg);
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		if (dp_reg & DP_PORT_EN)
+			intel_dp_link_down(intel_output, dp_priv->DP);
+	} else {
+		if (!(dp_reg & DP_PORT_EN))
+			intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+	}
+	dp_priv->dpms_mode = mode;
+}
+
+/*
+ * Fetch AUX CH registers 0x202 - 0x207 which contain
+ * link status information
+ */
+static bool
+intel_dp_get_link_status(struct intel_output *intel_output,
+			 uint8_t link_status[DP_LINK_STATUS_SIZE])
+{
+	int ret;
+
+	ret = intel_dp_aux_native_read(intel_output,
+				       DP_LANE0_1_STATUS,
+				       link_status, DP_LINK_STATUS_SIZE);
+	if (ret != DP_LINK_STATUS_SIZE)
+		return false;
+	return true;
+}
+
+static uint8_t
+intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		     int r)
+{
+	return link_status[r - DP_LANE0_1_STATUS];
+}
+
+static void
+intel_dp_save(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	dp_priv->save_DP = I915_READ(dp_priv->output_reg);
+	intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+				 dp_priv->save_link_configuration,
+				 sizeof (dp_priv->save_link_configuration));
+}
+
+static uint8_t
+intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				 int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT :
+			 DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT);
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT;
+}
+
+static uint8_t
+intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE],
+				      int lane)
+{
+	int	    i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1);
+	int	    s = ((lane & 1) ?
+			 DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT :
+			 DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT);
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT;
+}
+
+
+#if 0
+static char	*voltage_names[] = {
+	"0.4V", "0.6V", "0.8V", "1.2V"
+};
+static char	*pre_emph_names[] = {
+	"0dB", "3.5dB", "6dB", "9.5dB"
+};
+static char	*link_train_names[] = {
+	"pattern 1", "pattern 2", "idle", "off"
+};
+#endif
+
+/*
+ * These are source-specific values; current Intel hardware supports
+ * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
+ */
+#define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
+
+static uint8_t
+intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+{
+	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		return DP_TRAIN_PRE_EMPHASIS_6;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		return DP_TRAIN_PRE_EMPHASIS_3_5;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+	default:
+		return DP_TRAIN_PRE_EMPHASIS_0;
+	}
+}
+
+static void
+intel_get_adjust_train(struct intel_output *intel_output,
+		       uint8_t link_status[DP_LINK_STATUS_SIZE],
+		       int lane_count,
+		       uint8_t train_set[4])
+{
+	uint8_t v = 0;
+	uint8_t p = 0;
+	int lane;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		uint8_t this_v = intel_get_adjust_request_voltage(link_status, lane);
+		uint8_t this_p = intel_get_adjust_request_pre_emphasis(link_status, lane);
+
+		if (this_v > v)
+			v = this_v;
+		if (this_p > p)
+			p = this_p;
+	}
+
+	if (v >= I830_DP_VOLTAGE_MAX)
+		v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
+
+	if (p >= intel_dp_pre_emphasis_max(v))
+		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+	for (lane = 0; lane < 4; lane++)
+		train_set[lane] = v | p;
+}
+
+static uint32_t
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
+{
+	uint32_t	signal_levels = 0;
+
+	switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+	case DP_TRAIN_VOLTAGE_SWING_400:
+	default:
+		signal_levels |= DP_VOLTAGE_0_4;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_600:
+		signal_levels |= DP_VOLTAGE_0_6;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_800:
+		signal_levels |= DP_VOLTAGE_0_8;
+		break;
+	case DP_TRAIN_VOLTAGE_SWING_1200:
+		signal_levels |= DP_VOLTAGE_1_2;
+		break;
+	}
+	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+	case DP_TRAIN_PRE_EMPHASIS_0:
+	default:
+		signal_levels |= DP_PRE_EMPHASIS_0;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_3_5:
+		signal_levels |= DP_PRE_EMPHASIS_3_5;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_6:
+		signal_levels |= DP_PRE_EMPHASIS_6;
+		break;
+	case DP_TRAIN_PRE_EMPHASIS_9_5:
+		signal_levels |= DP_PRE_EMPHASIS_9_5;
+		break;
+	}
+	return signal_levels;
+}
+
+static uint8_t
+intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
+		      int lane)
+{
+	int i = DP_LANE0_1_STATUS + (lane >> 1);
+	int s = (lane & 1) * 4;
+	uint8_t l = intel_dp_link_status(link_status, i);
+
+	return (l >> s) & 0xf;
+}
+
+/* Check for clock recovery is done on all channels */
+static bool
+intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	int lane;
+	uint8_t lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return false;
+	}
+	return true;
+}
+
+/* Check to see if channel eq is done on all channels */
+#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\
+			 DP_LANE_CHANNEL_EQ_DONE|\
+			 DP_LANE_SYMBOL_LOCKED)
+static bool
+intel_channel_eq_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count)
+{
+	uint8_t lane_align;
+	uint8_t lane_status;
+	int lane;
+
+	lane_align = intel_dp_link_status(link_status,
+					  DP_LANE_ALIGN_STATUS_UPDATED);
+	if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return false;
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = intel_get_lane_status(link_status, lane);
+		if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS)
+			return false;
+	}
+	return true;
+}
+
+static bool
+intel_dp_set_link_train(struct intel_output *intel_output,
+			uint32_t dp_reg_value,
+			uint8_t dp_train_pat,
+			uint8_t train_set[4],
+			bool first)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	int ret;
+
+	I915_WRITE(dp_priv->output_reg, dp_reg_value);
+	POSTING_READ(dp_priv->output_reg);
+	if (first)
+		intel_wait_for_vblank(dev);
+
+	intel_dp_aux_native_write_1(intel_output,
+				    DP_TRAINING_PATTERN_SET,
+				    dp_train_pat);
+
+	ret = intel_dp_aux_native_write(intel_output,
+					DP_TRAINING_LANE0_SET, train_set, 4);
+	if (ret != 4)
+		return false;
+
+	return true;
+}
+
+static void
+intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+		    uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint8_t	train_set[4];
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+	int i;
+	uint8_t voltage;
+	bool clock_recovery = false;
+	bool channel_eq = false;
+	bool first = true;
+	int tries;
+
+	/* Write the link configuration data */
+	intel_dp_aux_native_write(intel_output, 0x100,
+				  link_configuration, DP_LINK_CONFIGURATION_SIZE);
+
+	DP |= DP_PORT_EN;
+	DP &= ~DP_LINK_TRAIN_MASK;
+	memset(train_set, 0, 4);
+	voltage = 0xff;
+	tries = 0;
+	clock_recovery = false;
+	for (;;) {
+		/* Use train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+		DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+		if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+					     DP_TRAINING_PATTERN_1, train_set, first))
+			break;
+		first = false;
+		/* Set training pattern 1 */
+
+		udelay(100);
+		if (!intel_dp_get_link_status(intel_output, link_status))
+			break;
+
+		if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
+			clock_recovery = true;
+			break;
+		}
+
+		/* Check to see if we've tried the max voltage */
+		for (i = 0; i < dp_priv->lane_count; i++)
+			if ((train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
+				break;
+		if (i == dp_priv->lane_count)
+			break;
+
+		/* Check to see if we've tried the same voltage 5 times */
+		if ((train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+			++tries;
+			if (tries == 5)
+				break;
+		} else
+			tries = 0;
+		voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+
+		/* Compute new train_set as requested by target */
+		intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+	}
+
+	/* channel equalization */
+	tries = 0;
+	channel_eq = false;
+	for (;;) {
+		/* Use train_set[0] to set the voltage and pre emphasis values */
+		uint32_t    signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
+		DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
+
+		/* channel eq pattern */
+		if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+					     DP_TRAINING_PATTERN_2, train_set,
+					     false))
+			break;
+
+		udelay(400);
+		if (!intel_dp_get_link_status(intel_output, link_status))
+			break;
+
+		if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
+			channel_eq = true;
+			break;
+		}
+
+		/* Try 5 times */
+		if (tries > 5)
+			break;
+
+		/* Compute new train_set as requested by target */
+		intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+		++tries;
+	}
+
+	I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
+	POSTING_READ(dp_priv->output_reg);
+	intel_dp_aux_native_write_1(intel_output,
+				    DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
+}
+
+static void
+intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
+	POSTING_READ(dp_priv->output_reg);
+}
+
+static void
+intel_dp_restore(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	if (dp_priv->save_DP & DP_PORT_EN)
+		intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+	else
+		intel_dp_link_down(intel_output,  dp_priv->save_DP);
+}
+
+/*
+ * According to DP spec
+ * 5.1.2:
+ *  1. Read DPCD
+ *  2. Configure link according to Receiver Capabilities
+ *  3. Use Link Training from 2.5.3.3 and 3.5.1.3
+ *  4. Check link status on receipt of hot-plug interrupt
+ */
+
+static void
+intel_dp_check_link_status(struct intel_output *intel_output)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint8_t link_status[DP_LINK_STATUS_SIZE];
+
+	if (!intel_output->enc.crtc)
+		return;
+
+	if (!intel_dp_get_link_status(intel_output, link_status)) {
+		intel_dp_link_down(intel_output, dp_priv->DP);
+		return;
+	}
+
+	if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
+		intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
+ *
+ * \return true if DP port is connected.
+ * \return false if DP port is disconnected.
+ */
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+	uint32_t temp, bit;
+	enum drm_connector_status status;
+
+	dp_priv->has_audio = false;
+
+	temp = I915_READ(PORT_HOTPLUG_EN);
+
+	I915_WRITE(PORT_HOTPLUG_EN,
+	       temp |
+	       DPB_HOTPLUG_INT_EN |
+	       DPC_HOTPLUG_INT_EN |
+	       DPD_HOTPLUG_INT_EN);
+
+	POSTING_READ(PORT_HOTPLUG_EN);
+
+	switch (dp_priv->output_reg) {
+	case DP_B:
+		bit = DPB_HOTPLUG_INT_STATUS;
+		break;
+	case DP_C:
+		bit = DPC_HOTPLUG_INT_STATUS;
+		break;
+	case DP_D:
+		bit = DPD_HOTPLUG_INT_STATUS;
+		break;
+	default:
+		return connector_status_unknown;
+	}
+
+	temp = I915_READ(PORT_HOTPLUG_STAT);
+
+	if ((temp & bit) == 0)
+		return connector_status_disconnected;
+
+	status = connector_status_disconnected;
+	if (intel_dp_aux_native_read(intel_output,
+				     0x000, dp_priv->dpcd,
+				     sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
+	{
+		if (dp_priv->dpcd[0] != 0)
+			status = connector_status_connected;
+	}
+	return status;
+}
+
+static int intel_dp_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	/* We should parse the EDID data and find out if it has an audio sink
+	 */
+
+	return intel_ddc_get_modes(intel_output);
+}
+
+static void
+intel_dp_destroy (struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	if (intel_output->i2c_bus)
+		intel_i2c_destroy(intel_output->i2c_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
+	.dpms = intel_dp_dpms,
+	.mode_fixup = intel_dp_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_dp_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dp_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = intel_dp_save,
+	.restore = intel_dp_restore,
+	.detect = intel_dp_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_dp_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
+	.get_modes = intel_dp_get_modes,
+	.mode_valid = intel_dp_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static void intel_dp_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dp_enc_funcs = {
+	.destroy = intel_dp_enc_destroy,
+};
+
+void
+intel_dp_hot_plug(struct intel_output *intel_output)
+{
+	struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+
+	if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
+		intel_dp_check_link_status(intel_output);
+}
+
+void
+intel_dp_init(struct drm_device *dev, int output_reg)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+	struct intel_dp_priv *dp_priv;
+
+	intel_output = kcalloc(sizeof(struct intel_output) + 
+			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+
+	connector = &intel_output->base;
+	drm_connector_init(dev, connector, &intel_dp_connector_funcs,
+			   DRM_MODE_CONNECTOR_DisplayPort);
+	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
+
+	intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+
+	connector->interlace_allowed = true;
+	connector->doublescan_allowed = 0;
+
+	dp_priv->intel_output = intel_output;
+	dp_priv->output_reg = output_reg;
+	dp_priv->has_audio = false;
+	dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
+	intel_output->dev_priv = dp_priv;
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+
+	drm_mode_connector_attach_encoder(&intel_output->base,
+					  &intel_output->enc);
+	drm_sysfs_connector_add(connector);
+
+	/* Set up the DDC bus. */
+	intel_dp_i2c_init(intel_output,
+			  (output_reg == DP_B) ? "DPDDC-B" :
+			  (output_reg == DP_C) ? "DPDDC-C" : "DPDDC-D");
+	intel_output->ddc_bus = &dp_priv->adapter;
+	intel_output->hot_plug = intel_dp_hot_plug;
+
+	/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
+	 * 0xd.  Failure to do so will result in spurious interrupts being
+	 * generated on the port when a cable is not attached.
+	 */
+	if (IS_G4X(dev) && !IS_GM45(dev)) {
+		u32 temp = I915_READ(PEG_BAND_GAP_DATA);
+		I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
+	}
+}
diff --git a/drivers/gpu/drm/i915/intel_dp.h b/drivers/gpu/drm/i915/intel_dp.h
new file mode 100644
index 0000000..2b38054
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+#define	DP_LINK_BW_SET		0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+
+#define DP_LANE_COUNT_SET	0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	0x102
+
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+struct i2c_algo_dp_aux_data {
+	bool running;
+	u16 address;
+	int (*aux_ch) (struct i2c_adapter *adapter,
+		       uint8_t *send, int send_bytes,
+		       uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */
diff --git a/drivers/gpu/drm/i915/intel_dp_i2c.c b/drivers/gpu/drm/i915/intel_dp_i2c.c
new file mode 100644
index 0000000..4e60f14
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dp_i2c.c
@@ -0,0 +1,272 @@
+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+			    uint8_t write_byte, uint8_t *read_byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	uint16_t address = algo_data->address;
+	uint8_t msg[5];
+	uint8_t reply[2];
+	int msg_bytes;
+	int reply_bytes;
+	int ret;
+
+	/* Set up the command byte */
+	if (mode & MODE_I2C_READ)
+		msg[0] = AUX_I2C_READ << 4;
+	else
+		msg[0] = AUX_I2C_WRITE << 4;
+
+	if (!(mode & MODE_I2C_STOP))
+		msg[0] |= AUX_I2C_MOT << 4;
+
+	msg[1] = address >> 8;
+	msg[2] = address;
+
+	switch (mode) {
+	case MODE_I2C_WRITE:
+		msg[3] = 0;
+		msg[4] = write_byte;
+		msg_bytes = 5;
+		reply_bytes = 1;
+		break;
+	case MODE_I2C_READ:
+		msg[3] = 0;
+		msg_bytes = 4;
+		reply_bytes = 2;
+		break;
+	default:
+		msg_bytes = 3;
+		reply_bytes = 1;
+		break;
+	}
+
+	for (;;) {
+		ret = (*algo_data->aux_ch)(adapter,
+					   msg, msg_bytes,
+					   reply, reply_bytes);
+		if (ret < 0) {
+			printk(KERN_ERR "aux_ch failed %d\n", ret);
+			return ret;
+		}
+		switch (reply[0] & AUX_I2C_REPLY_MASK) {
+		case AUX_I2C_REPLY_ACK:
+			if (mode == MODE_I2C_READ) {
+				*read_byte = reply[1];
+			}
+			return reply_bytes - 1;
+		case AUX_I2C_REPLY_NACK:
+			printk(KERN_ERR "aux_ch nack\n");
+			return -EREMOTEIO;
+		case AUX_I2C_REPLY_DEFER:
+			printk(KERN_ERR "aux_ch defer\n");
+			udelay(100);
+			break;
+		default:
+			printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+			return -EREMOTEIO;
+		}
+	}
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_START;
+	int ret;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	algo_data->address = address;
+	algo_data->running = true;
+	ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+	return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_STOP;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	if (algo_data->running) {
+		(void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+		algo_data->running = false;
+	}
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+	return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+	return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+		     struct i2c_msg *msgs,
+		     int num)
+{
+	int ret = 0;
+	bool reading = false;
+	int m;
+	int b;
+
+	for (m = 0; m < num; m++) {
+		u16 len = msgs[m].len;
+		u8 *buf = msgs[m].buf;
+		reading = (msgs[m].flags & I2C_M_RD) != 0;
+		ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+		if (ret < 0)
+			break;
+		if (reading) {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+				if (ret < 0)
+					break;
+			}
+		} else {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+				if (ret < 0)
+					break;
+			}
+		}
+		if (ret < 0)
+			break;
+	}
+	if (ret >= 0)
+		ret = num;
+	i2c_algo_dp_aux_stop(adapter, reading);
+	printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+	return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+	       I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+	.master_xfer	= i2c_algo_dp_aux_xfer,
+	.functionality	= i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+	(void) i2c_algo_dp_aux_address(adapter, 0, false);
+	(void) i2c_algo_dp_aux_stop(adapter, false);
+					   
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+	adapter->algo = &i2c_dp_aux_algo;
+	adapter->retries = 3;
+	i2c_dp_aux_reset_bus(adapter);
+	return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+	int error;
+	
+	error = i2c_dp_aux_prepare_bus(adapter);
+	if (error)
+		return error;
+	error = i2c_add_adapter(adapter);
+	return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cd4b9c5..004541c 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -54,6 +54,7 @@
 #define INTEL_OUTPUT_LVDS 4
 #define INTEL_OUTPUT_TVOUT 5
 #define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
 
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
@@ -65,7 +66,6 @@
 	u32 reg; /* GPIO reg */
 	struct i2c_adapter adapter;
 	struct i2c_algo_bit_data algo;
-        u8 slave_addr;
 };
 
 struct intel_framebuffer {
@@ -79,11 +79,12 @@
 
 	struct drm_encoder enc;
 	int type;
-	struct intel_i2c_chan *i2c_bus; /* for control functions */
-	struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+	struct i2c_adapter *i2c_bus;
+	struct i2c_adapter *ddc_bus;
 	bool load_detect_temp;
 	bool needs_tv_clock;
 	void *dev_priv;
+	void (*hot_plug)(struct intel_output *);
 };
 
 struct intel_crtc {
@@ -104,9 +105,9 @@
 #define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
 #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
 
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
-					const char *name);
-void intel_i2c_destroy(struct intel_i2c_chan *chan);
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+				     const char *name);
+void intel_i2c_destroy(struct i2c_adapter *adapter);
 int intel_ddc_get_modes(struct intel_output *intel_output);
 extern bool intel_ddc_probe(struct intel_output *intel_output);
 void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
@@ -116,6 +117,10 @@
 extern void intel_dvo_init(struct drm_device *dev);
 extern void intel_tv_init(struct drm_device *dev);
 extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode);
 
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 1ee3007..13bff20 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -384,10 +384,9 @@
 {
 	struct intel_output *intel_output;
 	struct intel_dvo_device *dvo;
-	struct intel_i2c_chan *i2cbus = NULL;
+	struct i2c_adapter *i2cbus = NULL;
 	int ret = 0;
 	int i;
-	int gpio_inited = 0;
 	int encoder_type = DRM_MODE_ENCODER_NONE;
 	intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
 	if (!intel_output)
@@ -420,14 +419,11 @@
 		 * It appears that everything is on GPIOE except for panels
 		 * on i830 laptops, which are on GPIOB (DVOA).
 		 */
-		if (gpio_inited != gpio) {
-			if (i2cbus != NULL)
-				intel_i2c_destroy(i2cbus);
-			if (!(i2cbus = intel_i2c_create(dev, gpio,
-				gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
-				continue;
-			}
-			gpio_inited = gpio;
+		if (i2cbus != NULL)
+			intel_i2c_destroy(i2cbus);
+		if (!(i2cbus = intel_i2c_create(dev, gpio,
+			gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+			continue;
 		}
 
 		if (dvo->dev_ops!= NULL)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 4ea2a65..9e30daa 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -31,6 +31,7 @@
 #include "drmP.h"
 #include "drm.h"
 #include "drm_crtc.h"
+#include "drm_edid.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
@@ -56,8 +57,7 @@
 	sdvox = SDVO_ENCODING_HDMI |
 		SDVO_BORDER_ENABLE |
 		SDVO_VSYNC_ACTIVE_HIGH |
-		SDVO_HSYNC_ACTIVE_HIGH |
-		SDVO_NULL_PACKETS_DURING_VSYNC;
+		SDVO_HSYNC_ACTIVE_HIGH;
 
 	if (hdmi_priv->has_hdmi_sink)
 		sdvox |= SDVO_AUDIO_ENABLE;
@@ -129,20 +129,26 @@
 	return true;
 }
 
-static void
-intel_hdmi_sink_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_hdmi_edid_detect(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
 	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
 	struct edid *edid = NULL;
+	enum drm_connector_status status = connector_status_disconnected;
 
 	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
-	if (edid != NULL) {
-		hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
-		kfree(edid);
+			    intel_output->ddc_bus);
+	hdmi_priv->has_hdmi_sink = false;
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+		}
 		intel_output->base.display_info.raw_edid = NULL;
+		kfree(edid);
 	}
+	return status;
 }
 
 static enum drm_connector_status
@@ -154,11 +160,7 @@
 	/* FIXME hotplug detect */
 
 	hdmi_priv->has_hdmi_sink = false;
-	intel_hdmi_sink_detect(connector);
-	if (hdmi_priv->has_hdmi_sink)
-		return connector_status_connected;
-	else
-		return connector_status_disconnected;
+	return intel_hdmi_edid_detect(connector);
 }
 
 static enum drm_connector_status
@@ -201,10 +203,9 @@
 		return connector_status_unknown;
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
-		intel_hdmi_sink_detect(connector);
-		return connector_status_connected;
-	} else
+	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+		return intel_hdmi_edid_detect(connector);
+	else
 		return connector_status_disconnected;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index f7061f6..62b8bea 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -124,6 +124,7 @@
  * @output: driver specific output device
  * @reg: GPIO reg to use
  * @name: name for this bus
+ * @slave_addr: slave address (if fixed)
  *
  * Creates and registers a new i2c bus with the Linux i2c layer, for use
  * in output probing and control (e.g. DDC or SDVO control functions).
@@ -139,8 +140,8 @@
  *   %GPIOH
  * see PRM for details on how these different busses are used.
  */
-struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
-					const char *name)
+struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
+				     const char *name)
 {
 	struct intel_i2c_chan *chan;
 
@@ -174,7 +175,7 @@
 	intel_i2c_quirk_set(dev, false);
 	udelay(20);
 
-	return chan;
+	return &chan->adapter;
 
 out_free:
 	kfree(chan);
@@ -187,11 +188,16 @@
  *
  * Unregister the adapter from the i2c layer, then free the structure.
  */
-void intel_i2c_destroy(struct intel_i2c_chan *chan)
+void intel_i2c_destroy(struct i2c_adapter *adapter)
 {
-	if (!chan)
+	struct intel_i2c_chan *chan;
+
+	if (!adapter)
 		return;
 
+	chan = container_of(adapter,
+			    struct intel_i2c_chan,
+			    adapter);
 	i2c_del_adapter(&chan->adapter);
 	kfree(chan);
 }
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f073ed8..9564ca4 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -39,6 +39,21 @@
 
 #define I915_LVDS "i915_lvds"
 
+/*
+ * the following four scaling options are defined.
+ * #define DRM_MODE_SCALE_NON_GPU	0
+ * #define DRM_MODE_SCALE_FULLSCREEN	1
+ * #define DRM_MODE_SCALE_NO_SCALE	2
+ * #define DRM_MODE_SCALE_ASPECT	3
+ */
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+	int fitting_mode;
+	u32 pfit_control;
+	u32 pfit_pgm_ratios;
+};
+
 /**
  * Sets the backlight level.
  *
@@ -213,10 +228,27 @@
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
 {
+	/*
+	 * float point operation is not supported . So the PANEL_RATIO_FACTOR
+	 * is defined, which can avoid the float point computation when
+	 * calculating the panel ratio.
+	 */
+#define PANEL_RATIO_FACTOR 8192
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct drm_encoder *tmp_encoder;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+	u32 pfit_control = 0, pfit_pgm_ratios = 0;
+	int left_border = 0, right_border = 0, top_border = 0;
+	int bottom_border = 0;
+	bool border = 0;
+	int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+	int horiz_ratio, vert_ratio;
+	u32 hsync_width, vsync_width;
+	u32 hblank_width, vblank_width;
+	u32 hsync_pos, vsync_pos;
 
 	/* Should never happen!! */
 	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
@@ -232,7 +264,9 @@
 			return false;
 		}
 	}
-
+	/* If we don't have a panel mode, there is nothing we can do */
+	if (dev_priv->panel_fixed_mode == NULL)
+		return true;
 	/*
 	 * If we have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
@@ -256,6 +290,243 @@
 		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
 	}
 
+	/* Make sure pre-965s set dither correctly */
+	if (!IS_I965G(dev)) {
+		if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+	}
+
+	/* Native modes don't need fitting */
+	if (adjusted_mode->hdisplay == mode->hdisplay &&
+			adjusted_mode->vdisplay == mode->vdisplay) {
+		pfit_pgm_ratios = 0;
+		border = 0;
+		goto out;
+	}
+
+	/* 965+ wants fuzzy fitting */
+	if (IS_I965G(dev))
+		pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+					PFIT_FILTER_FUZZY;
+
+	hsync_width = adjusted_mode->crtc_hsync_end -
+					adjusted_mode->crtc_hsync_start;
+	vsync_width = adjusted_mode->crtc_vsync_end -
+					adjusted_mode->crtc_vsync_start;
+	hblank_width = adjusted_mode->crtc_hblank_end -
+					adjusted_mode->crtc_hblank_start;
+	vblank_width = adjusted_mode->crtc_vblank_end -
+					adjusted_mode->crtc_vblank_start;
+	/*
+	 * Deal with panel fitting options. Figure out how to stretch the
+	 * image based on its aspect ratio & the current panel fitting mode.
+	 */
+	panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+				adjusted_mode->vdisplay;
+	desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+				mode->vdisplay;
+	/*
+	 * Enable automatic panel scaling for non-native modes so that they fill
+	 * the screen.  Should be enabled before the pipe is enabled, according
+	 * to register description and PRM.
+	 * Change the value here to see the borders for debugging
+	 */
+	I915_WRITE(BCLRPAT_A, 0);
+	I915_WRITE(BCLRPAT_B, 0);
+
+	switch (lvds_priv->fitting_mode) {
+	case DRM_MODE_SCALE_NO_SCALE:
+		/*
+		 * For centered modes, we have to calculate border widths &
+		 * heights and modify the values programmed into the CRTC.
+		 */
+		left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+		right_border = left_border;
+		if (mode->hdisplay & 1)
+			right_border++;
+		top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+		bottom_border = top_border;
+		if (mode->vdisplay & 1)
+			bottom_border++;
+		/* Set active & border values */
+		adjusted_mode->crtc_hdisplay = mode->hdisplay;
+		/* Keep the boder be even */
+		if (right_border & 1)
+			right_border++;
+		/* use the border directly instead of border minuse one */
+		adjusted_mode->crtc_hblank_start = mode->hdisplay +
+						right_border;
+		/* keep the blank width constant */
+		adjusted_mode->crtc_hblank_end =
+			adjusted_mode->crtc_hblank_start + hblank_width;
+		/* get the hsync pos relative to hblank start */
+		hsync_pos = (hblank_width - hsync_width) / 2;
+		/* keep the hsync pos be even */
+		if (hsync_pos & 1)
+			hsync_pos++;
+		adjusted_mode->crtc_hsync_start =
+				adjusted_mode->crtc_hblank_start + hsync_pos;
+		/* keep the hsync width constant */
+		adjusted_mode->crtc_hsync_end =
+				adjusted_mode->crtc_hsync_start + hsync_width;
+		adjusted_mode->crtc_vdisplay = mode->vdisplay;
+		/* use the border instead of border minus one */
+		adjusted_mode->crtc_vblank_start = mode->vdisplay +
+						bottom_border;
+		/* keep the vblank width constant */
+		adjusted_mode->crtc_vblank_end =
+				adjusted_mode->crtc_vblank_start + vblank_width;
+		/* get the vsync start postion relative to vblank start */
+		vsync_pos = (vblank_width - vsync_width) / 2;
+		adjusted_mode->crtc_vsync_start =
+				adjusted_mode->crtc_vblank_start + vsync_pos;
+		/* keep the vsync width constant */
+		adjusted_mode->crtc_vsync_end =
+				adjusted_mode->crtc_vblank_start + vsync_width;
+		border = 1;
+		break;
+	case DRM_MODE_SCALE_ASPECT:
+		/* Scale but preserve the spect ratio */
+		pfit_control |= PFIT_ENABLE;
+		if (IS_I965G(dev)) {
+			/* 965+ is easy, it does everything in hw */
+			if (panel_ratio > desired_ratio)
+				pfit_control |= PFIT_SCALING_PILLAR;
+			else if (panel_ratio < desired_ratio)
+				pfit_control |= PFIT_SCALING_LETTER;
+			else
+				pfit_control |= PFIT_SCALING_AUTO;
+		} else {
+			/*
+			 * For earlier chips we have to calculate the scaling
+			 * ratio by hand and program it into the
+			 * PFIT_PGM_RATIO register
+			 */
+			u32 horiz_bits, vert_bits, bits = 12;
+			horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+						adjusted_mode->hdisplay;
+			vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+						adjusted_mode->vdisplay;
+			horiz_scale = adjusted_mode->hdisplay *
+					PANEL_RATIO_FACTOR / mode->hdisplay;
+			vert_scale = adjusted_mode->vdisplay *
+					PANEL_RATIO_FACTOR / mode->vdisplay;
+
+			/* retain aspect ratio */
+			if (panel_ratio > desired_ratio) { /* Pillar */
+				u32 scaled_width;
+				scaled_width = mode->hdisplay * vert_scale /
+						PANEL_RATIO_FACTOR;
+				horiz_ratio = vert_ratio;
+				pfit_control |= (VERT_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+				/* Pillar will have left/right borders */
+				left_border = (adjusted_mode->hdisplay -
+						scaled_width) / 2;
+				right_border = left_border;
+				if (mode->hdisplay & 1) /* odd resolutions */
+					right_border++;
+				/* keep the border be even */
+				if (right_border & 1)
+					right_border++;
+				adjusted_mode->crtc_hdisplay = scaled_width;
+				/* use border instead of border minus one */
+				adjusted_mode->crtc_hblank_start =
+					scaled_width + right_border;
+				/* keep the hblank width constant */
+				adjusted_mode->crtc_hblank_end =
+					adjusted_mode->crtc_hblank_start +
+							hblank_width;
+				/*
+				 * get the hsync start pos relative to
+				 * hblank start
+				 */
+				hsync_pos = (hblank_width - hsync_width) / 2;
+				/* keep the hsync_pos be even */
+				if (hsync_pos & 1)
+					hsync_pos++;
+				adjusted_mode->crtc_hsync_start =
+					adjusted_mode->crtc_hblank_start +
+							hsync_pos;
+				/* keept hsync width constant */
+				adjusted_mode->crtc_hsync_end =
+					adjusted_mode->crtc_hsync_start +
+							hsync_width;
+				border = 1;
+			} else if (panel_ratio < desired_ratio) { /* letter */
+				u32 scaled_height = mode->vdisplay *
+					horiz_scale / PANEL_RATIO_FACTOR;
+				vert_ratio = horiz_ratio;
+				pfit_control |= (HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+				/* Letterbox will have top/bottom border */
+				top_border = (adjusted_mode->vdisplay -
+					scaled_height) / 2;
+				bottom_border = top_border;
+				if (mode->vdisplay & 1)
+					bottom_border++;
+				adjusted_mode->crtc_vdisplay = scaled_height;
+				/* use border instead of border minus one */
+				adjusted_mode->crtc_vblank_start =
+					scaled_height + bottom_border;
+				/* keep the vblank width constant */
+				adjusted_mode->crtc_vblank_end =
+					adjusted_mode->crtc_vblank_start +
+							vblank_width;
+				/*
+				 * get the vsync start pos relative to
+				 * vblank start
+				 */
+				vsync_pos = (vblank_width - vsync_width) / 2;
+				adjusted_mode->crtc_vsync_start =
+					adjusted_mode->crtc_vblank_start +
+							vsync_pos;
+				/* keep the vsync width constant */
+				adjusted_mode->crtc_vsync_end =
+					adjusted_mode->crtc_vsync_start +
+							vsync_width;
+				border = 1;
+			} else {
+			/* Aspects match, Let hw scale both directions */
+				pfit_control |= (VERT_AUTO_SCALE |
+						 HORIZ_AUTO_SCALE |
+						 VERT_INTERP_BILINEAR |
+						 HORIZ_INTERP_BILINEAR);
+			}
+			horiz_bits = (1 << bits) * horiz_ratio /
+					PANEL_RATIO_FACTOR;
+			vert_bits = (1 << bits) * vert_ratio /
+					PANEL_RATIO_FACTOR;
+			pfit_pgm_ratios =
+				((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+						PFIT_VERT_SCALE_MASK) |
+				((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+						PFIT_HORIZ_SCALE_MASK);
+		}
+		break;
+
+	case DRM_MODE_SCALE_FULLSCREEN:
+		/*
+		 * Full scaling, even if it changes the aspect ratio.
+		 * Fortunately this is all done for us in hw.
+		 */
+		pfit_control |= PFIT_ENABLE;
+		if (IS_I965G(dev))
+			pfit_control |= PFIT_SCALING_AUTO;
+		else
+			pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+					 VERT_INTERP_BILINEAR |
+					 HORIZ_INTERP_BILINEAR);
+		break;
+	default:
+		break;
+	}
+
+out:
+	lvds_priv->pfit_control = pfit_control;
+	lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
 	/*
 	 * XXX: It would be nice to support lower refresh rates on the
 	 * panels to reduce power consumption, and perhaps match the
@@ -301,8 +572,8 @@
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	u32 pfit_control;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
 
 	/*
 	 * The LVDS pin pair will already have been turned on in the
@@ -319,22 +590,8 @@
 	 * screen.  Should be enabled before the pipe is enabled, according to
 	 * register description and PRM.
 	 */
-	if (mode->hdisplay != adjusted_mode->hdisplay ||
-	    mode->vdisplay != adjusted_mode->vdisplay)
-		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
-				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
-				HORIZ_INTERP_BILINEAR);
-	else
-		pfit_control = 0;
-
-	if (!IS_I965G(dev)) {
-		if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
-			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-	}
-	else
-		pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
-	I915_WRITE(PFIT_CONTROL, pfit_control);
+	I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+	I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
 }
 
 /**
@@ -406,6 +663,34 @@
 				   struct drm_property *property,
 				   uint64_t value)
 {
+	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output =
+			to_intel_output(connector);
+
+	if (property == dev->mode_config.scaling_mode_property &&
+				connector->encoder) {
+		struct drm_crtc *crtc = connector->encoder->crtc;
+		struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+		if (value == DRM_MODE_SCALE_NON_GPU) {
+			DRM_DEBUG_KMS(I915_LVDS,
+					"non_GPU property is unsupported\n");
+			return 0;
+		}
+		if (lvds_priv->fitting_mode == value) {
+			/* the LVDS scaling property is not changed */
+			return 0;
+		}
+		lvds_priv->fitting_mode = value;
+		if (crtc && crtc->enabled) {
+			/*
+			 * If the CRTC is enabled, the display will be changed
+			 * according to the new panel fitting mode.
+			 */
+			drm_crtc_helper_set_mode(crtc, &crtc->mode,
+				crtc->x, crtc->y, crtc->fb);
+		}
+	}
+
 	return 0;
 }
 
@@ -456,7 +741,7 @@
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Apple Mac Mini (Core series)",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
 		},
 	},
@@ -464,7 +749,7 @@
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Apple Mac Mini (Core 2 series)",
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
 		},
 	},
@@ -518,6 +803,7 @@
 	struct drm_encoder *encoder;
 	struct drm_display_mode *scan; /* *modes, *bios_mode; */
 	struct drm_crtc *crtc;
+	struct intel_lvds_priv *lvds_priv;
 	u32 lvds;
 	int pipe, gpio = GPIOC;
 
@@ -531,7 +817,8 @@
 		gpio = PCH_GPIOC;
 	}
 
-	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	intel_output = kzalloc(sizeof(struct intel_output) +
+				sizeof(struct intel_lvds_priv), GFP_KERNEL);
 	if (!intel_output) {
 		return;
 	}
@@ -553,7 +840,18 @@
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 
+	lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+	intel_output->dev_priv = lvds_priv;
+	/* create the scaling mode property */
+	drm_mode_create_scaling_mode_property(dev);
+	/*
+	 * the initial panel fitting mode will be FULL_SCREEN.
+	 */
 
+	drm_connector_attach_property(&intel_output->base,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
 	/*
 	 * LVDS discovery:
 	 * 1) check for EDID on DDC
@@ -649,5 +947,5 @@
 	if (intel_output->ddc_bus)
 		intel_i2c_destroy(intel_output->ddc_bus);
 	drm_connector_cleanup(connector);
-	kfree(connector);
+	kfree(intel_output);
 }
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index e0910fe..67e2f46 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -53,10 +53,9 @@
 		}
 	};
 
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
-	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
-
+	intel_i2c_quirk_set(intel_output->base.dev, true);
+	ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
+	intel_i2c_quirk_set(intel_output->base.dev, false);
 	if (ret == 2)
 		return true;
 
@@ -74,10 +73,9 @@
 	struct edid *edid;
 	int ret = 0;
 
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
-	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
-	intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+	intel_i2c_quirk_set(intel_output->base.dev, true);
+	edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
+	intel_i2c_quirk_set(intel_output->base.dev, false);
 	if (edid) {
 		drm_mode_connector_update_edid_property(&intel_output->base,
 							edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9a00adb..f034737 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -38,8 +38,7 @@
 #undef SDVO_DEBUG
 #define I915_SDVO	"i915_sdvo"
 struct intel_sdvo_priv {
-	struct intel_i2c_chan *i2c_bus;
-	int slaveaddr;
+	u8 slave_addr;
 
 	/* Register for the SDVO device: SDVOB or SDVOC */
 	int output_device;
@@ -146,13 +145,13 @@
 
 	struct i2c_msg msgs[] = {
 		{
-			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = 0,
 			.len = 1,
 			.buf = out_buf,
 		},
 		{
-			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = I2C_M_RD,
 			.len = 1,
 			.buf = buf,
@@ -162,7 +161,7 @@
 	out_buf[0] = addr;
 	out_buf[1] = 0;
 
-	if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+	if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
 	{
 		*ch = buf[0];
 		return true;
@@ -175,10 +174,11 @@
 static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
 				  u8 ch)
 {
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	u8 out_buf[2];
 	struct i2c_msg msgs[] = {
 		{
-			.addr = intel_output->i2c_bus->slave_addr,
+			.addr = sdvo_priv->slave_addr >> 1,
 			.flags = 0,
 			.len = 2,
 			.buf = out_buf,
@@ -188,7 +188,7 @@
 	out_buf[0] = addr;
 	out_buf[1] = ch;
 
-	if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+	if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
 	{
 		return true;
 	}
@@ -1369,9 +1369,8 @@
 	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	struct edid *edid = NULL;
 
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	edid = drm_get_edid(&intel_output->base,
-			    &intel_output->ddc_bus->adapter);
+			    intel_output->ddc_bus);
 	if (edid != NULL) {
 		sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
 		kfree(edid);
@@ -1549,7 +1548,6 @@
 static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 {
 	struct intel_output *intel_output = to_intel_output(connector);
-	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
 
 	/*
@@ -1557,8 +1555,6 @@
 	 * Assume that the preferred modes are
 	 * arranged in priority order.
 	 */
-	/* set the bus switch and get the modes */
-	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	intel_ddc_get_modes(intel_output);
 	if (list_empty(&connector->probed_modes) == false)
 		return;
@@ -1709,7 +1705,7 @@
 
 	list_for_each_entry(connector,
 			&dev->mode_config.connector_list, head) {
-		if (to_intel_output(connector)->ddc_bus == chan) {
+		if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
 			intel_output = to_intel_output(connector);
 			break;
 		}
@@ -1723,7 +1719,7 @@
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
 	struct i2c_algo_bit_data *algo_data;
-	struct i2c_algorithm *algo;
+	const struct i2c_algorithm *algo;
 
 	algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
 	intel_output =
@@ -1733,7 +1729,7 @@
 		return -EINVAL;
 
 	sdvo_priv = intel_output->dev_priv;
-	algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+	algo = intel_output->i2c_bus->algo;
 
 	intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
 	return algo->master_xfer(i2c_adap, msgs, num);
@@ -1785,13 +1781,11 @@
 	struct drm_connector *connector;
 	struct intel_output *intel_output;
 	struct intel_sdvo_priv *sdvo_priv;
-	struct intel_i2c_chan *i2cbus = NULL;
-	struct intel_i2c_chan *ddcbus = NULL;
+
 	int connector_type;
 	u8 ch[0x40];
 	int i;
-	int encoder_type, output_id;
-	u8 slave_addr;
+	int encoder_type;
 
 	intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
 	if (!intel_output) {
@@ -1799,29 +1793,24 @@
 	}
 
 	sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+	sdvo_priv->output_device = output_device;
+
+	intel_output->dev_priv = sdvo_priv;
 	intel_output->type = INTEL_OUTPUT_SDVO;
 
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
-		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+		intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
 	else
-		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+		intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
 
-	if (!i2cbus)
+	if (!intel_output->i2c_bus)
 		goto err_inteloutput;
 
-	slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
-	sdvo_priv->i2c_bus = i2cbus;
+	sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
 
-	if (output_device == SDVOB) {
-		output_id = 1;
-	} else {
-		output_id = 2;
-	}
-	sdvo_priv->i2c_bus->slave_addr = slave_addr >> 1;
-	sdvo_priv->output_device = output_device;
-	intel_output->i2c_bus = i2cbus;
-	intel_output->dev_priv = sdvo_priv;
+	/* Save the bit-banging i2c functionality for use by the DDC wrapper */
+	intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
 
 	/* Read the regs to test if we can talk to the device */
 	for (i = 0; i < 0x40; i++) {
@@ -1835,17 +1824,15 @@
 
 	/* setup the DDC bus. */
 	if (output_device == SDVOB)
-		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
 	else
-		ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+		intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
 
-	if (ddcbus == NULL)
+	if (intel_output->ddc_bus == NULL)
 		goto err_i2c;
 
-	intel_sdvo_i2c_bit_algo.functionality =
-		intel_output->i2c_bus->adapter.algo->functionality;
-	ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
-	intel_output->ddc_bus = ddcbus;
+	/* Wrap with our custom algo which switches to DDC mode */
+	intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
 
 	/* In defaut case sdvo lvds is false */
 	sdvo_priv->is_lvds = false;
@@ -1965,9 +1952,10 @@
 	return true;
 
 err_i2c:
-	if (ddcbus != NULL)
+	if (intel_output->ddc_bus != NULL)
 		intel_i2c_destroy(intel_output->ddc_bus);
-	intel_i2c_destroy(intel_output->i2c_bus);
+	if (intel_output->i2c_bus != NULL)
+		intel_i2c_destroy(intel_output->i2c_bus);
 err_inteloutput:
 	kfree(intel_output);
 
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index ea68992..a43c98e 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1383,34 +1383,31 @@
 	/*
 	 * Detect TV by polling)
 	 */
-	if (intel_output->load_detect_temp) {
-		/* TV not currently running, prod it with destructive detect */
-		save_tv_dac = tv_dac;
-		tv_ctl = I915_READ(TV_CTL);
-		save_tv_ctl = tv_ctl;
-		tv_ctl &= ~TV_ENC_ENABLE;
-		tv_ctl &= ~TV_TEST_MODE_MASK;
-		tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
-		tv_dac &= ~TVDAC_SENSE_MASK;
-		tv_dac &= ~DAC_A_MASK;
-		tv_dac &= ~DAC_B_MASK;
-		tv_dac &= ~DAC_C_MASK;
-		tv_dac |= (TVDAC_STATE_CHG_EN |
-			   TVDAC_A_SENSE_CTL |
-			   TVDAC_B_SENSE_CTL |
-			   TVDAC_C_SENSE_CTL |
-			   DAC_CTL_OVERRIDE |
-			   DAC_A_0_7_V |
-			   DAC_B_0_7_V |
-			   DAC_C_0_7_V);
-		I915_WRITE(TV_CTL, tv_ctl);
-		I915_WRITE(TV_DAC, tv_dac);
-		intel_wait_for_vblank(dev);
-		tv_dac = I915_READ(TV_DAC);
-		I915_WRITE(TV_DAC, save_tv_dac);
-		I915_WRITE(TV_CTL, save_tv_ctl);
-		intel_wait_for_vblank(dev);
-	}
+	save_tv_dac = tv_dac;
+	tv_ctl = I915_READ(TV_CTL);
+	save_tv_ctl = tv_ctl;
+	tv_ctl &= ~TV_ENC_ENABLE;
+	tv_ctl &= ~TV_TEST_MODE_MASK;
+	tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+	tv_dac &= ~TVDAC_SENSE_MASK;
+	tv_dac &= ~DAC_A_MASK;
+	tv_dac &= ~DAC_B_MASK;
+	tv_dac &= ~DAC_C_MASK;
+	tv_dac |= (TVDAC_STATE_CHG_EN |
+		   TVDAC_A_SENSE_CTL |
+		   TVDAC_B_SENSE_CTL |
+		   TVDAC_C_SENSE_CTL |
+		   DAC_CTL_OVERRIDE |
+		   DAC_A_0_7_V |
+		   DAC_B_0_7_V |
+		   DAC_C_0_7_V);
+	I915_WRITE(TV_CTL, tv_ctl);
+	I915_WRITE(TV_DAC, tv_dac);
+	intel_wait_for_vblank(dev);
+	tv_dac = I915_READ(TV_DAC);
+	I915_WRITE(TV_DAC, save_tv_dac);
+	I915_WRITE(TV_CTL, save_tv_ctl);
+	intel_wait_for_vblank(dev);
 	/*
 	 *  A B C
 	 *  0 1 1 Composite
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f30aa72..f97563d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -35,6 +35,23 @@
 #include "atom.h"
 
 /*
+ * Clear GPU surface registers.
+ */
+static void radeon_surface_init(struct radeon_device *rdev)
+{
+	/* FIXME: check this out */
+	if (rdev->family < CHIP_R600) {
+		int i;
+
+		for (i = 0; i < 8; i++) {
+			WREG32(RADEON_SURFACE0_INFO +
+			       i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
+			       0);
+		}
+	}
+}
+
+/*
  * GPU scratch registers helpers function.
  */
 static void radeon_scratch_init(struct radeon_device *rdev)
@@ -496,6 +513,8 @@
 	radeon_errata(rdev);
 	/* Initialize scratch registers */
 	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
 
 	/* TODO: disable VGA need to use VGA request */
 	/* BIOS*/
@@ -604,9 +623,6 @@
 	if (r) {
 		return r;
 	}
-	if (rdev->fbdev_rfb && rdev->fbdev_rfb->obj) {
-		rdev->fbdev_robj = rdev->fbdev_rfb->obj->driver_private;
-	}
 	if (!ret) {
 		DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 09c9fb9..84ba69f 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -345,7 +345,7 @@
 	drm_exit(driver);
 }
 
-late_initcall(radeon_init);
+module_init(radeon_init);
 module_exit(radeon_exit);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index fa86d39..9e8f191 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -478,14 +478,16 @@
 {
 	struct fb_info *info;
 	struct radeon_fb_device *rfbdev;
-	struct drm_framebuffer *fb;
+	struct drm_framebuffer *fb = NULL;
 	struct radeon_framebuffer *rfb;
 	struct drm_mode_fb_cmd mode_cmd;
 	struct drm_gem_object *gobj = NULL;
 	struct radeon_object *robj = NULL;
 	struct device *device = &rdev->pdev->dev;
 	int size, aligned_size, ret;
+	u64 fb_gpuaddr;
 	void *fbptr = NULL;
+	unsigned long tmp;
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
@@ -498,11 +500,12 @@
 	aligned_size = ALIGN(size, PAGE_SIZE);
 
 	ret = radeon_gem_object_create(rdev, aligned_size, 0,
-				       RADEON_GEM_DOMAIN_VRAM,
-				       false, ttm_bo_type_kernel,
-				       false, &gobj);
+			RADEON_GEM_DOMAIN_VRAM,
+			false, ttm_bo_type_kernel,
+			false, &gobj);
 	if (ret) {
-		printk(KERN_ERR "failed to allocate framebuffer\n");
+		printk(KERN_ERR "failed to allocate framebuffer (%d %d)\n",
+		       surface_width, surface_height);
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -515,12 +518,19 @@
 		ret = -ENOMEM;
 		goto out_unref;
 	}
+	ret = radeon_object_pin(robj, RADEON_GEM_DOMAIN_VRAM, &fb_gpuaddr);
+	if (ret) {
+		printk(KERN_ERR "failed to pin framebuffer\n");
+		ret = -ENOMEM;
+		goto out_unref;
+	}
 
 	list_add(&fb->filp_head, &rdev->ddev->mode_config.fb_kernel_list);
 
 	rfb = to_radeon_framebuffer(fb);
 	*rfb_p = rfb;
 	rdev->fbdev_rfb = rfb;
+	rdev->fbdev_robj = robj;
 
 	info = framebuffer_alloc(sizeof(struct radeon_fb_device), device);
 	if (info == NULL) {
@@ -541,13 +551,13 @@
 	info->fix.xpanstep = 1; /* doing it in hw */
 	info->fix.ypanstep = 1; /* doing it in hw */
 	info->fix.ywrapstep = 0;
-	info->fix.accel = FB_ACCEL_I830;
+	info->fix.accel = FB_ACCEL_NONE;
 	info->fix.type_aux = 0;
 	info->flags = FBINFO_DEFAULT;
 	info->fbops = &radeonfb_ops;
 	info->fix.line_length = fb->pitch;
-	info->screen_base = fbptr;
-	info->fix.smem_start = (unsigned long)fbptr;
+	tmp = fb_gpuaddr - rdev->mc.vram_location;
+	info->fix.smem_start = rdev->mc.aper_base + tmp;
 	info->fix.smem_len = size;
 	info->screen_base = fbptr;
 	info->screen_size = size;
@@ -562,8 +572,8 @@
 	info->var.width = -1;
 	info->var.xres = fb_width;
 	info->var.yres = fb_height;
-	info->fix.mmio_start = pci_resource_start(rdev->pdev, 2);
-	info->fix.mmio_len = pci_resource_len(rdev->pdev, 2);
+	info->fix.mmio_start = 0;
+	info->fix.mmio_len = 0;
 	info->pixmap.size = 64*1024;
 	info->pixmap.buf_align = 8;
 	info->pixmap.access_align = 32;
@@ -644,7 +654,7 @@
 	if (robj) {
 		radeon_object_kunmap(robj);
 	}
-	if (ret) {
+	if (fb && ret) {
 		list_del(&fb->filp_head);
 		drm_gem_object_unreference(gobj);
 		drm_framebuffer_cleanup(fb);
@@ -813,6 +823,7 @@
 		robj = rfb->obj->driver_private;
 		unregister_framebuffer(info);
 		radeon_object_kunmap(robj);
+		radeon_object_unpin(robj);
 		framebuffer_release(info);
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 983e8df..bac0d06 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -223,7 +223,6 @@
 {
 	uint32_t flags;
 	uint32_t tmp;
-	void *fbptr;
 	int r;
 
 	flags = radeon_object_flags_from_domain(domain);
@@ -242,10 +241,6 @@
 		DRM_ERROR("radeon: failed to reserve object for pinning it.\n");
 		return r;
 	}
-	if (robj->rdev->fbdev_robj == robj) {
-		mutex_lock(&robj->rdev->fbdev_info->lock);
-		radeon_object_kunmap(robj);
-	}
 	tmp = robj->tobj.mem.placement;
 	ttm_flag_masked(&tmp, flags, TTM_PL_MASK_MEM);
 	robj->tobj.proposed_placement = tmp | TTM_PL_FLAG_NO_EVICT | TTM_PL_MASK_CACHING;
@@ -261,23 +256,12 @@
 		DRM_ERROR("radeon: failed to pin object.\n");
 	}
 	radeon_object_unreserve(robj);
-	if (robj->rdev->fbdev_robj == robj) {
-		if (!r) {
-			r = radeon_object_kmap(robj, &fbptr);
-		}
-		if (!r) {
-			robj->rdev->fbdev_info->screen_base = fbptr;
-			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
-		}
-		mutex_unlock(&robj->rdev->fbdev_info->lock);
-	}
 	return r;
 }
 
 void radeon_object_unpin(struct radeon_object *robj)
 {
 	uint32_t flags;
-	void *fbptr;
 	int r;
 
 	spin_lock(&robj->tobj.lock);
@@ -297,10 +281,6 @@
 		DRM_ERROR("radeon: failed to reserve object for unpinning it.\n");
 		return;
 	}
-	if (robj->rdev->fbdev_robj == robj) {
-		mutex_lock(&robj->rdev->fbdev_info->lock);
-		radeon_object_kunmap(robj);
-	}
 	flags = robj->tobj.mem.placement;
 	robj->tobj.proposed_placement = flags & ~TTM_PL_FLAG_NO_EVICT;
 	r = ttm_buffer_object_validate(&robj->tobj,
@@ -310,16 +290,6 @@
 		DRM_ERROR("radeon: failed to unpin buffer.\n");
 	}
 	radeon_object_unreserve(robj);
-	if (robj->rdev->fbdev_robj == robj) {
-		if (!r) {
-			r = radeon_object_kmap(robj, &fbptr);
-		}
-		if (!r) {
-			robj->rdev->fbdev_info->screen_base = fbptr;
-			robj->rdev->fbdev_info->fix.smem_start = (unsigned long)fbptr;
-		}
-		mutex_unlock(&robj->rdev->fbdev_info->lock);
-	}
 }
 
 int radeon_object_wait(struct radeon_object *robj)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 517c845..bdec583 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -34,7 +34,6 @@
 #include <linux/highmem.h>
 #include <linux/wait.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/module.h>
 
 void ttm_bo_free_old_node(struct ttm_buffer_object *bo)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 27b146c..40b7503 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -32,7 +32,6 @@
 #include <ttm/ttm_bo_driver.h>
 #include <ttm/ttm_placement.h>
 #include <linux/mm.h>
-#include <linux/version.h>
 #include <linux/rbtree.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 0331fa7..75dc8bd 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -28,7 +28,6 @@
  * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
  */
 
-#include <linux/version.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
 #include <linux/highmem.h>
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index aa87b6a..8206442 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -328,6 +328,7 @@
 
 config I2C_DESIGNWARE
 	tristate "Synopsys DesignWare"
+	depends on HAVE_CLK
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index bd066bb..09f98ed 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -135,6 +135,7 @@
 
 	ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
 	hw[0].irq = 14;
+	hw[1].irq = 15;
 
 	return ide_host_add(d, hws, 2, NULL);
 }
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 77f79d2..c509c99 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -92,6 +92,11 @@
 	return 0;
 }
 
+bool ide_port_acpi(ide_hwif_t *hwif)
+{
+	return ide_noacpi == 0 && hwif->acpidata;
+}
+
 /**
  * ide_get_dev_handle - finds acpi_handle and PCI device.function
  * @dev: device to locate
@@ -352,9 +357,6 @@
 	unsigned long	gtf_address;
 	unsigned long	obj_loc;
 
-	if (ide_noacpi)
-		return 0;
-
 	DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
 
 	ret = do_drive_get_GTF(drive, &gtf_length, &gtf_address, &obj_loc);
@@ -389,16 +391,6 @@
 	struct acpi_buffer	output;
 	union acpi_object 	*out_obj;
 
-	if (ide_noacpi)
-		return;
-
-	DEBPRINT("ENTER:\n");
-
-	if (!hwif->acpidata) {
-		DEBPRINT("no ACPI data for %s\n", hwif->name);
-		return;
-	}
-
 	/* Setting up output buffer for _GTM */
 	output.length = ACPI_ALLOCATE_BUFFER;
 	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
@@ -479,16 +471,6 @@
 	struct ide_acpi_drive_link	*master = &hwif->acpidata->master;
 	struct ide_acpi_drive_link	*slave = &hwif->acpidata->slave;
 
-	if (ide_noacpi)
-		return;
-
-	DEBPRINT("ENTER:\n");
-
-	if (!hwif->acpidata) {
-		DEBPRINT("no ACPI data for %s\n", hwif->name);
-		return;
-	}
-
 	/* Give the GTM buffer + drive Identify data to the channel via the
 	 * _STM method: */
 	/* setup input parameters buffer for _STM */
@@ -527,16 +509,11 @@
 	ide_drive_t *drive;
 	int i;
 
-	if (ide_noacpi || ide_noacpi_psx)
+	if (ide_noacpi_psx)
 		return;
 
 	DEBPRINT("ENTER:\n");
 
-	if (!hwif->acpidata) {
-		DEBPRINT("no ACPI data for %s\n", hwif->name);
-		return;
-	}
-
 	/* channel first and then drives for power on and verse versa for power off */
 	if (on)
 		acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
@@ -616,7 +593,7 @@
 				 drive->name, err);
 	}
 
-	if (!ide_acpionboot) {
+	if (ide_noacpi || ide_acpionboot == 0) {
 		DEBPRINT("ACPI methods disabled on boot\n");
 		return;
 	}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 4a19686..6a9a769 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -592,9 +592,19 @@
 			}
 		} else if (!blk_pc_request(rq)) {
 			ide_cd_request_sense_fixup(drive, cmd);
-			/* complain if we still have data left to transfer */
+
 			uptodate = cmd->nleft ? 0 : 1;
-			if (uptodate == 0)
+
+			/*
+			 * suck out the remaining bytes from the drive in an
+			 * attempt to complete the data xfer. (see BZ#13399)
+			 */
+			if (!(stat & ATA_ERR) && !uptodate && thislen) {
+				ide_pio_bytes(drive, cmd, write, thislen);
+				uptodate = cmd->nleft ? 0 : 1;
+			}
+
+			if (!uptodate)
 				rq->cmd_flags |= REQ_FAILED;
 		}
 		goto out_end;
@@ -876,9 +886,12 @@
 		return stat;
 
 	/*
-	 * Sanity check the given block size
+	 * Sanity check the given block size, in so far as making
+	 * sure the sectors_per_frame we give to the caller won't
+	 * end up being bogus.
 	 */
 	blocklen = be32_to_cpu(capbuf.blocklen);
+	blocklen = (blocklen >> SECTOR_BITS) << SECTOR_BITS;
 	switch (blocklen) {
 	case 512:
 	case 1024:
@@ -886,10 +899,9 @@
 	case 4096:
 		break;
 	default:
-		printk(KERN_ERR PFX "%s: weird block size %u\n",
+		printk_once(KERN_ERR PFX "%s: weird block size %u; "
+				"setting default block size to 2048\n",
 				drive->name, blocklen);
-		printk(KERN_ERR PFX "%s: default to 2kb block size\n",
-				drive->name);
 		blocklen = 2048;
 		break;
 	}
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c
index 5bf958e..1099bf7 100644
--- a/drivers/ide/ide-devsets.c
+++ b/drivers/ide/ide-devsets.c
@@ -183,6 +183,6 @@
 	err = setfunc(drive, *(int *)&rq->cmd[1]);
 	if (err)
 		rq->errors = err;
-	ide_complete_rq(drive, err, ide_rq_bytes(rq));
+	ide_complete_rq(drive, err, blk_rq_bytes(rq));
 	return ide_stopped;
 }
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 219e6fb..ee58c88 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -361,9 +361,6 @@
 	if (__ide_dma_bad_drive(drive))
 		return 0;
 
-	if (ide_id_dma_bug(drive))
-		return 0;
-
 	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
 		return config_drive_for_dma(drive);
 
@@ -394,24 +391,6 @@
 	return -1;
 }
 
-int ide_id_dma_bug(ide_drive_t *drive)
-{
-	u16 *id = drive->id;
-
-	if (id[ATA_ID_FIELD_VALID] & 4) {
-		if ((id[ATA_ID_UDMA_MODES] >> 8) &&
-		    (id[ATA_ID_MWDMA_MODES] >> 8))
-			goto err_out;
-	} else if ((id[ATA_ID_MWDMA_MODES] >> 8) &&
-		   (id[ATA_ID_SWDMA_MODES] >> 8))
-		goto err_out;
-
-	return 0;
-err_out:
-	printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
-	return 1;
-}
-
 int ide_set_dma(ide_drive_t *drive)
 {
 	int rc;
diff --git a/drivers/ide/ide-eh.c b/drivers/ide/ide-eh.c
index 2b91419..e9abf2c 100644
--- a/drivers/ide/ide-eh.c
+++ b/drivers/ide/ide-eh.c
@@ -149,7 +149,7 @@
 	if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) {
 		if (err <= 0 && rq->errors == 0)
 			rq->errors = -EIO;
-		ide_complete_rq(drive, err ? err : 0, ide_rq_bytes(rq));
+		ide_complete_rq(drive, err ? err : 0, blk_rq_bytes(rq));
 	}
 }
 
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 8b3f204..fefbdfc 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -293,7 +293,7 @@
 	drive->failed_pc = NULL;
 	if (blk_fs_request(rq) == 0 && rq->errors == 0)
 		rq->errors = -EIO;
-	ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
+	ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
 	return ide_stopped;
 }
 
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1059f80..d5f3c77 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -112,16 +112,6 @@
 	}
 }
 
-/* obsolete, blk_rq_bytes() should be used instead */
-unsigned int ide_rq_bytes(struct request *rq)
-{
-	if (blk_pc_request(rq))
-		return blk_rq_bytes(rq);
-	else
-		return blk_rq_cur_sectors(rq) << 9;
-}
-EXPORT_SYMBOL_GPL(ide_rq_bytes);
-
 int ide_complete_rq(ide_drive_t *drive, int error, unsigned int nr_bytes)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -152,14 +142,14 @@
 
 	if ((media == ide_floppy || media == ide_tape) && drv_req) {
 		rq->errors = 0;
-		ide_complete_rq(drive, 0, blk_rq_bytes(rq));
 	} else {
 		if (media == ide_tape)
 			rq->errors = IDE_DRV_ERROR_GENERAL;
 		else if (blk_fs_request(rq) == 0 && rq->errors == 0)
 			rq->errors = -EIO;
-		ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
 	}
+
+	ide_complete_rq(drive, -EIO, blk_rq_bytes(rq));
 }
 
 static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
@@ -476,10 +466,14 @@
 
 	if (!ide_lock_port(hwif)) {
 		ide_hwif_t *prev_port;
-
-		WARN_ON_ONCE(hwif->rq);
 repeat:
 		prev_port = hwif->host->cur_port;
+
+		if (drive->dev_flags & IDE_DFLAG_BLOCKED)
+			rq = hwif->rq;
+		else
+			WARN_ON_ONCE(hwif->rq);
+
 		if (drive->dev_flags & IDE_DFLAG_SLEEPING &&
 		    time_after(drive->sleep, jiffies)) {
 			ide_unlock_port(hwif);
@@ -506,43 +500,29 @@
 		hwif->cur_dev = drive;
 		drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
 
-		spin_unlock_irq(&hwif->lock);
-		spin_lock_irq(q->queue_lock);
-		/*
-		 * we know that the queue isn't empty, but this can happen
-		 * if the q->prep_rq_fn() decides to kill a request
-		 */
-		if (!rq)
+		if (rq == NULL) {
+			spin_unlock_irq(&hwif->lock);
+			spin_lock_irq(q->queue_lock);
+			/*
+			 * we know that the queue isn't empty, but this can
+			 * happen if ->prep_rq_fn() decides to kill a request
+			 */
 			rq = blk_fetch_request(drive->queue);
+			spin_unlock_irq(q->queue_lock);
+			spin_lock_irq(&hwif->lock);
 
-		spin_unlock_irq(q->queue_lock);
-		spin_lock_irq(&hwif->lock);
-
-		if (!rq) {
-			ide_unlock_port(hwif);
-			goto out;
+			if (rq == NULL) {
+				ide_unlock_port(hwif);
+				goto out;
+			}
 		}
 
 		/*
 		 * Sanity: don't accept a request that isn't a PM request
-		 * if we are currently power managed. This is very important as
-		 * blk_stop_queue() doesn't prevent the blk_fetch_request()
-		 * above to return us whatever is in the queue. Since we call
-		 * ide_do_request() ourselves, we end up taking requests while
-		 * the queue is blocked...
-		 * 
-		 * We let requests forced at head of queue with ide-preempt
-		 * though. I hope that doesn't happen too much, hopefully not
-		 * unless the subdriver triggers such a thing in its own PM
-		 * state machine.
+		 * if we are currently power managed.
 		 */
-		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
-		    blk_pm_request(rq) == 0 &&
-		    (rq->cmd_flags & REQ_PREEMPT) == 0) {
-			/* there should be no pending command at this point */
-			ide_unlock_port(hwif);
-			goto plug_device;
-		}
+		BUG_ON((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+		       blk_pm_request(rq) == 0);
 
 		hwif->rq = rq;
 
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index 82f252c..e246d3d 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -64,7 +64,8 @@
 		goto out;
 	}
 
-	id = kmalloc(size, GFP_KERNEL);
+	/* ata_id_to_hd_driveid() relies on 'id' to be fully allocated. */
+	id = kmalloc(ATA_ID_WORDS * 2, GFP_KERNEL);
 	if (id == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index fa04715..2892b24 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -210,6 +210,7 @@
  */
 static const struct drive_list_entry ivb_list[] = {
 	{ "QUANTUM FIREBALLlct10 05"	, "A03.0900"	},
+	{ "QUANTUM FIREBALLlct20 30"	, "APL.0900"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB00"	},
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB01"	},
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB00"	},
@@ -329,9 +330,6 @@
 
 	kfree(id);
 
-	if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
-		ide_dma_off(drive);
-
 	return 1;
 out_err:
 	if (rc == 2)
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index c14ca14..ad7be266 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -10,9 +10,11 @@
 	struct request_pm_state rqpm;
 	int ret;
 
-	/* call ACPI _GTM only once */
-	if ((drive->dn & 1) == 0 || pair == NULL)
-		ide_acpi_get_timing(hwif);
+	if (ide_port_acpi(hwif)) {
+		/* call ACPI _GTM only once */
+		if ((drive->dn & 1) == 0 || pair == NULL)
+			ide_acpi_get_timing(hwif);
+	}
 
 	memset(&rqpm, 0, sizeof(rqpm));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
@@ -26,9 +28,11 @@
 	ret = blk_execute_rq(drive->queue, NULL, rq, 0);
 	blk_put_request(rq);
 
-	/* call ACPI _PS3 only after both devices are suspended */
-	if (ret == 0 && ((drive->dn & 1) || pair == NULL))
-		ide_acpi_set_state(hwif, 0);
+	if (ret == 0 && ide_port_acpi(hwif)) {
+		/* call ACPI _PS3 only after both devices are suspended */
+		if ((drive->dn & 1) || pair == NULL)
+			ide_acpi_set_state(hwif, 0);
+	}
 
 	return ret;
 }
@@ -42,13 +46,15 @@
 	struct request_pm_state rqpm;
 	int err;
 
-	/* call ACPI _PS0 / _STM only once */
-	if ((drive->dn & 1) == 0 || pair == NULL) {
-		ide_acpi_set_state(hwif, 1);
-		ide_acpi_push_timing(hwif);
-	}
+	if (ide_port_acpi(hwif)) {
+		/* call ACPI _PS0 / _STM only once */
+		if ((drive->dn & 1) == 0 || pair == NULL) {
+			ide_acpi_set_state(hwif, 1);
+			ide_acpi_push_timing(hwif);
+		}
 
-	ide_acpi_exec_tfs(drive);
+		ide_acpi_exec_tfs(drive);
+	}
 
 	memset(&rqpm, 0, sizeof(rqpm));
 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 51af4ee..1bb106f 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -818,6 +818,24 @@
 	return j;
 }
 
+static void ide_host_enable_irqs(struct ide_host *host)
+{
+	ide_hwif_t *hwif;
+	int i;
+
+	ide_host_for_each_port(i, hwif, host) {
+		if (hwif == NULL)
+			continue;
+
+		/* clear any pending IRQs */
+		hwif->tp_ops->read_status(hwif);
+
+		/* unmask IRQs */
+		if (hwif->io_ports.ctl_addr)
+			hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+	}
+}
+
 /*
  * This routine sets up the IRQ for an IDE interface.
  */
@@ -831,9 +849,6 @@
 	if (irq_handler == NULL)
 		irq_handler = ide_intr;
 
-	if (io_ports->ctl_addr)
-		hwif->tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
-
 	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 
@@ -1404,6 +1419,8 @@
 			ide_port_tune_devices(hwif);
 	}
 
+	ide_host_enable_irqs(host);
+
 	ide_host_for_each_port(i, hwif, host) {
 		if (hwif == NULL)
 			continue;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9b60b6b..7c8e712 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -75,6 +75,7 @@
 	depends on LEDS_CLASS && X86 && EXPERIMENTAL
 	help
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
+	  You have to set leds-alix2.force=1 for boards with Award BIOS.
 
 config LEDS_H1940
 	tristate "LED Support for iPAQ H1940 device"
@@ -145,15 +146,16 @@
 	  of_platform devices.  For instance, LEDs which are listed in a "dts"
 	  file.
 
-config LEDS_LP5521
-	tristate "LED Support for the LP5521 LEDs"
+config LEDS_LP3944
+	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 	depends on LEDS_CLASS && I2C
 	help
-	  If you say 'Y' here you get support for the National Semiconductor
-	  LP5521 LED driver used in n8x0 boards.
+    This option enables support for LEDs connected to the National
+    Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+    Fun Light Chip.
 
-	  This driver can be built as a module by choosing 'M'. The module
-	  will be called leds-lp5521.
+	  To compile this driver as a module, choose M here: the
+	  module will be called leds-lp3944.
 
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2d41c4d..e8cdcf7 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -20,6 +20,7 @@
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
diff --git a/drivers/leds/leds-alix2.c b/drivers/leds/leds-alix2.c
index ddbd773..731d4ee 100644
--- a/drivers/leds/leds-alix2.c
+++ b/drivers/leds/leds-alix2.c
@@ -14,7 +14,7 @@
 
 static int force = 0;
 module_param(force, bool, 0444);
-MODULE_PARM_DESC(force, "Assume system has ALIX.2 style LEDs");
+MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs");
 
 struct alix_led {
 	struct led_classdev cdev;
@@ -155,6 +155,11 @@
 		goto out;
 	}
 
+	/* enable output on GPIO for LED 1,2,3 */
+	outl(1 << 6, 0x6104);
+	outl(1 << 9, 0x6184);
+	outl(1 << 11, 0x6184);
+
 	pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
 	if (!IS_ERR(pdev)) {
 		ret = platform_driver_probe(&alix_led_driver, alix_led_probe);
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 4149ecb..779d7f2 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -97,6 +97,10 @@
 	enum led_ids			led_id;
 	enum led_colors			color;
 	enum led_bits			state;
+
+	/* General attributes of RGB LEDs */
+	int				wave_pattern;
+	int				rgb_current;
 };
 
 
@@ -254,7 +258,7 @@
 		bd2802_reset_cancel(led);
 
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
-	bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+	bd2802_write_byte(led->client, reg, led->rgb_current);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
 	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
@@ -275,9 +279,9 @@
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
 	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
-	bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+	bd2802_write_byte(led->client, reg, led->rgb_current);
 	reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
-	bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+	bd2802_write_byte(led->client, reg, led->wave_pattern);
 
 	bd2802_enable(led, id);
 	bd2802_update_state(led, id, color, BD2802_BLINK);
@@ -406,7 +410,7 @@
 		ret = device_create_file(&led->client->dev,
 						bd2802_addr_attributes[i]);
 		if (ret) {
-			dev_err(&led->client->dev, "failed to sysfs file %s\n",
+			dev_err(&led->client->dev, "failed: sysfs file %s\n",
 					bd2802_addr_attributes[i]->attr.name);
 			goto failed_remove_files;
 		}
@@ -483,6 +487,52 @@
 	.store = bd2802_store_adv_conf,
 };
 
+#define BD2802_CONTROL_ATTR(attr_name, name_str)			\
+static ssize_t bd2802_show_##attr_name(struct device *dev,		\
+	struct device_attribute *attr, char *buf)			\
+{									\
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+	ssize_t ret;							\
+	down_read(&led->rwsem);						\
+	ret = sprintf(buf, "0x%02x\n", led->attr_name);			\
+	up_read(&led->rwsem);						\
+	return ret;							\
+}									\
+static ssize_t bd2802_store_##attr_name(struct device *dev,		\
+	struct device_attribute *attr, const char *buf, size_t count)	\
+{									\
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+	unsigned long val;						\
+	int ret;							\
+	if (!count)							\
+		return -EINVAL;						\
+	ret = strict_strtoul(buf, 16, &val);				\
+	if (ret)							\
+		return ret;						\
+	down_write(&led->rwsem);					\
+	led->attr_name = val;						\
+	up_write(&led->rwsem);						\
+	return count;							\
+}									\
+static struct device_attribute bd2802_##attr_name##_attr = {		\
+	.attr = {							\
+		.name = name_str,					\
+		.mode = 0644,						\
+		.owner = THIS_MODULE					\
+	},								\
+	.show = bd2802_show_##attr_name,				\
+	.store = bd2802_store_##attr_name,				\
+};
+
+BD2802_CONTROL_ATTR(wave_pattern, "wave_pattern");
+BD2802_CONTROL_ATTR(rgb_current, "rgb_current");
+
+static struct device_attribute *bd2802_attributes[] = {
+	&bd2802_adv_conf_attr,
+	&bd2802_wave_pattern_attr,
+	&bd2802_rgb_current_attr,
+};
+
 static void bd2802_led_work(struct work_struct *work)
 {
 	struct bd2802_led *led = container_of(work, struct bd2802_led, work);
@@ -538,7 +588,6 @@
 	led->cdev_led1r.brightness = LED_OFF;
 	led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
 	led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
-	led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
 	if (ret < 0) {
@@ -551,7 +600,6 @@
 	led->cdev_led1g.brightness = LED_OFF;
 	led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
 	led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
-	led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
 	if (ret < 0) {
@@ -564,7 +612,6 @@
 	led->cdev_led1b.brightness = LED_OFF;
 	led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
 	led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
-	led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
 	if (ret < 0) {
@@ -577,7 +624,6 @@
 	led->cdev_led2r.brightness = LED_OFF;
 	led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
 	led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
-	led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
 	if (ret < 0) {
@@ -590,7 +636,6 @@
 	led->cdev_led2g.brightness = LED_OFF;
 	led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
 	led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
-	led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME;
 
 	ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
 	if (ret < 0) {
@@ -640,7 +685,7 @@
 {
 	struct bd2802_led *led;
 	struct bd2802_led_platform_data *pdata;
-	int ret;
+	int ret, i;
 
 	led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
 	if (!led) {
@@ -670,13 +715,20 @@
 	/* To save the power, reset BD2802 after detecting */
 	gpio_set_value(led->pdata->reset_gpio, 0);
 
+	/* Default attributes */
+	led->wave_pattern = BD2802_PATTERN_HALF;
+	led->rgb_current = BD2802_CURRENT_032;
+
 	init_rwsem(&led->rwsem);
 
-	ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
-	if (ret) {
-		dev_err(&client->dev, "failed to create sysfs file %s\n",
-					bd2802_adv_conf_attr.attr.name);
-		goto failed_free;
+	for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++) {
+		ret = device_create_file(&led->client->dev,
+						bd2802_attributes[i]);
+		if (ret) {
+			dev_err(&led->client->dev, "failed: sysfs file %s\n",
+					bd2802_attributes[i]->attr.name);
+			goto failed_unregister_dev_file;
+		}
 	}
 
 	ret = bd2802_register_led_classdev(led);
@@ -686,7 +738,8 @@
 	return 0;
 
 failed_unregister_dev_file:
-	device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+	for (i--; i >= 0; i--)
+		device_remove_file(&led->client->dev, bd2802_attributes[i]);
 failed_free:
 	i2c_set_clientdata(client, NULL);
 	kfree(led);
@@ -697,12 +750,14 @@
 static int __exit bd2802_remove(struct i2c_client *client)
 {
 	struct bd2802_led *led = i2c_get_clientdata(client);
+	int i;
 
-	bd2802_unregister_led_classdev(led);
 	gpio_set_value(led->pdata->reset_gpio, 0);
+	bd2802_unregister_led_classdev(led);
 	if (led->adf_on)
 		bd2802_disable_adv_conf(led);
-	device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+	for (i = 0; i < ARRAY_SIZE(bd2802_attributes); i++)
+		device_remove_file(&led->client->dev, bd2802_attributes[i]);
 	i2c_set_clientdata(client, NULL);
 	kfree(led);
 
@@ -723,8 +778,7 @@
 	struct bd2802_led *led = i2c_get_clientdata(client);
 
 	if (!bd2802_is_all_off(led) || led->adf_on) {
-		gpio_set_value(led->pdata->reset_gpio, 1);
-		udelay(100);
+		bd2802_reset_cancel(led);
 		bd2802_restore_state(led);
 	}
 
@@ -762,4 +816,4 @@
 
 MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
 MODULE_DESCRIPTION("BD2802 LED driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d210905..6b06638 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -76,7 +76,7 @@
 	struct gpio_led_data *led_dat, struct device *parent,
 	int (*blink_set)(unsigned, unsigned long *, unsigned long *))
 {
-	int ret;
+	int ret, state;
 
 	/* skip leds that aren't available */
 	if (!gpio_is_valid(template->gpio)) {
@@ -99,11 +99,15 @@
 		led_dat->cdev.blink_set = gpio_blink_set;
 	}
 	led_dat->cdev.brightness_set = gpio_led_set;
-	led_dat->cdev.brightness = LED_OFF;
+	if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
+		state = !!gpio_get_value(led_dat->gpio) ^ led_dat->active_low;
+	else
+		state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
+	led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
 	if (!template->retain_state_suspended)
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
-	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low);
+	ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
 	if (ret < 0)
 		goto err;
 
@@ -129,7 +133,7 @@
 }
 
 #ifdef CONFIG_LEDS_GPIO_PLATFORM
-static int gpio_led_probe(struct platform_device *pdev)
+static int __devinit gpio_led_probe(struct platform_device *pdev)
 {
 	struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_led_data *leds_data;
@@ -223,12 +227,22 @@
 	memset(&led, 0, sizeof(led));
 	for_each_child_of_node(np, child) {
 		enum of_gpio_flags flags;
+		const char *state;
 
 		led.gpio = of_get_gpio_flags(child, 0, &flags);
 		led.active_low = flags & OF_GPIO_ACTIVE_LOW;
 		led.name = of_get_property(child, "label", NULL) ? : child->name;
 		led.default_trigger =
 			of_get_property(child, "linux,default-trigger", NULL);
+		state = of_get_property(child, "default-state", NULL);
+		if (state) {
+			if (!strcmp(state, "keep"))
+				led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+			else if(!strcmp(state, "on"))
+				led.default_state = LEDS_GPIO_DEFSTATE_ON;
+			else
+				led.default_state = LEDS_GPIO_DEFSTATE_OFF;
+		}
 
 		ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++],
 				      &ofdev->dev, NULL);
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
new file mode 100644
index 0000000..5946208
--- /dev/null
+++ b/drivers/leds/leds-lp3944.c
@@ -0,0 +1,466 @@
+/*
+ * leds-lp3944.c - driver for National Semiconductor LP3944 Funlight Chip
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * I2C driver for National Semiconductor LP3944 Funlight Chip
+ * http://www.national.com/pf/LP/LP3944.html
+ *
+ * This helper chip can drive up to 8 leds, with two programmable DIM modes;
+ * it could even be used as a gpio expander but this driver assumes it is used
+ * as a led controller.
+ *
+ * The DIM modes are used to set _blink_ patterns for leds, the pattern is
+ * specified supplying two parameters:
+ *   - period: from 0s to 1.6s
+ *   - duty cycle: percentage of the period the led is on, from 0 to 100
+ *
+ * LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+ * leds, the camera flash light and the displays backlights.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-lp3944.h>
+
+/* Read Only Registers */
+#define LP3944_REG_INPUT1     0x00 /* LEDs 0-7 InputRegister (Read Only) */
+#define LP3944_REG_REGISTER1  0x01 /* None (Read Only) */
+
+#define LP3944_REG_PSC0       0x02 /* Frequency Prescaler 0 (R/W) */
+#define LP3944_REG_PWM0       0x03 /* PWM Register 0 (R/W) */
+#define LP3944_REG_PSC1       0x04 /* Frequency Prescaler 1 (R/W) */
+#define LP3944_REG_PWM1       0x05 /* PWM Register 1 (R/W) */
+#define LP3944_REG_LS0        0x06 /* LEDs 0-3 Selector (R/W) */
+#define LP3944_REG_LS1        0x07 /* LEDs 4-7 Selector (R/W) */
+
+/* These registers are not used to control leds in LP3944, they can store
+ * arbitrary values which the chip will ignore.
+ */
+#define LP3944_REG_REGISTER8  0x08
+#define LP3944_REG_REGISTER9  0x09
+
+#define LP3944_DIM0 0
+#define LP3944_DIM1 1
+
+/* period in ms */
+#define LP3944_PERIOD_MIN 0
+#define LP3944_PERIOD_MAX 1600
+
+/* duty cycle is a percentage */
+#define LP3944_DUTY_CYCLE_MIN 0
+#define LP3944_DUTY_CYCLE_MAX 100
+
+#define ldev_to_led(c)       container_of(c, struct lp3944_led_data, ldev)
+
+/* Saved data */
+struct lp3944_led_data {
+	u8 id;
+	enum lp3944_type type;
+	enum lp3944_status status;
+	struct led_classdev ldev;
+	struct i2c_client *client;
+	struct work_struct work;
+};
+
+struct lp3944_data {
+	struct mutex lock;
+	struct i2c_client *client;
+	struct lp3944_led_data leds[LP3944_LEDS_MAX];
+};
+
+static int lp3944_reg_read(struct i2c_client *client, u8 reg, u8 *value)
+{
+	int tmp;
+
+	tmp = i2c_smbus_read_byte_data(client, reg);
+	if (tmp < 0)
+		return -EINVAL;
+
+	*value = tmp;
+
+	return 0;
+}
+
+static int lp3944_reg_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/**
+ * Set the period for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @period: period of a blink, that is a on/off cycle, expressed in ms.
+ */
+static int lp3944_dim_set_period(struct i2c_client *client, u8 dim, u16 period)
+{
+	u8 psc_reg;
+	u8 psc_value;
+	int err;
+
+	if (dim == LP3944_DIM0)
+		psc_reg = LP3944_REG_PSC0;
+	else if (dim == LP3944_DIM1)
+		psc_reg = LP3944_REG_PSC1;
+	else
+		return -EINVAL;
+
+	/* Convert period to Prescaler value */
+	if (period > LP3944_PERIOD_MAX)
+		return -EINVAL;
+
+	psc_value = (period * 255) / LP3944_PERIOD_MAX;
+
+	err = lp3944_reg_write(client, psc_reg, psc_value);
+
+	return err;
+}
+
+/**
+ * Set the duty cycle for DIM status
+ *
+ * @client: the i2c client
+ * @dim: either LP3944_DIM0 or LP3944_DIM1
+ * @duty_cycle: percentage of a period during which a led is ON
+ */
+static int lp3944_dim_set_dutycycle(struct i2c_client *client, u8 dim,
+				    u8 duty_cycle)
+{
+	u8 pwm_reg;
+	u8 pwm_value;
+	int err;
+
+	if (dim == LP3944_DIM0)
+		pwm_reg = LP3944_REG_PWM0;
+	else if (dim == LP3944_DIM1)
+		pwm_reg = LP3944_REG_PWM1;
+	else
+		return -EINVAL;
+
+	/* Convert duty cycle to PWM value */
+	if (duty_cycle > LP3944_DUTY_CYCLE_MAX)
+		return -EINVAL;
+
+	pwm_value = (duty_cycle * 255) / LP3944_DUTY_CYCLE_MAX;
+
+	err = lp3944_reg_write(client, pwm_reg, pwm_value);
+
+	return err;
+}
+
+/**
+ * Set the led status
+ *
+ * @led: a lp3944_led_data structure
+ * @status: one of LP3944_LED_STATUS_OFF
+ *                 LP3944_LED_STATUS_ON
+ *                 LP3944_LED_STATUS_DIM0
+ *                 LP3944_LED_STATUS_DIM1
+ */
+static int lp3944_led_set(struct lp3944_led_data *led, u8 status)
+{
+	struct lp3944_data *data = i2c_get_clientdata(led->client);
+	u8 id = led->id;
+	u8 reg;
+	u8 val = 0;
+	int err;
+
+	dev_dbg(&led->client->dev, "%s: %s, status before normalization:%d\n",
+		__func__, led->ldev.name, status);
+
+	switch (id) {
+	case LP3944_LED0:
+	case LP3944_LED1:
+	case LP3944_LED2:
+	case LP3944_LED3:
+		reg = LP3944_REG_LS0;
+		break;
+	case LP3944_LED4:
+	case LP3944_LED5:
+	case LP3944_LED6:
+	case LP3944_LED7:
+		id -= LP3944_LED4;
+		reg = LP3944_REG_LS1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (status > LP3944_LED_STATUS_DIM1)
+		return -EINVAL;
+
+	/* invert only 0 and 1, leave unchanged the other values,
+	 * remember we are abusing status to set blink patterns
+	 */
+	if (led->type == LP3944_LED_TYPE_LED_INVERTED && status < 2)
+		status = 1 - status;
+
+	mutex_lock(&data->lock);
+	lp3944_reg_read(led->client, reg, &val);
+
+	val &= ~(LP3944_LED_STATUS_MASK << (id << 1));
+	val |= (status << (id << 1));
+
+	dev_dbg(&led->client->dev, "%s: %s, reg:%d id:%d status:%d val:%#x\n",
+		__func__, led->ldev.name, reg, id, status, val);
+
+	/* set led status */
+	err = lp3944_reg_write(led->client, reg, val);
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static int lp3944_led_set_blink(struct led_classdev *led_cdev,
+				unsigned long *delay_on,
+				unsigned long *delay_off)
+{
+	struct lp3944_led_data *led = ldev_to_led(led_cdev);
+	u16 period;
+	u8 duty_cycle;
+	int err;
+
+	/* units are in ms */
+	if (*delay_on + *delay_off > LP3944_PERIOD_MAX)
+		return -EINVAL;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+		/* Special case: the leds subsystem requires a default user
+		 * friendly blink pattern for the LED.  Let's blink the led
+		 * slowly (1Hz).
+		 */
+		*delay_on = 500;
+		*delay_off = 500;
+	}
+
+	period = (*delay_on) + (*delay_off);
+
+	/* duty_cycle is the percentage of period during which the led is ON */
+	duty_cycle = 100 * (*delay_on) / period;
+
+	/* invert duty cycle for inverted leds, this has the same effect of
+	 * swapping delay_on and delay_off
+	 */
+	if (led->type == LP3944_LED_TYPE_LED_INVERTED)
+		duty_cycle = 100 - duty_cycle;
+
+	/* NOTE: using always the first DIM mode, this means that all leds
+	 * will have the same blinking pattern.
+	 *
+	 * We could find a way later to have two leds blinking in hardware
+	 * with different patterns at the same time, falling back to software
+	 * control for the other ones.
+	 */
+	err = lp3944_dim_set_period(led->client, LP3944_DIM0, period);
+	if (err)
+		return err;
+
+	err = lp3944_dim_set_dutycycle(led->client, LP3944_DIM0, duty_cycle);
+	if (err)
+		return err;
+
+	dev_dbg(&led->client->dev, "%s: OK hardware accelerated blink!\n",
+		__func__);
+
+	led->status = LP3944_LED_STATUS_DIM0;
+	schedule_work(&led->work);
+
+	return 0;
+}
+
+static void lp3944_led_set_brightness(struct led_classdev *led_cdev,
+				      enum led_brightness brightness)
+{
+	struct lp3944_led_data *led = ldev_to_led(led_cdev);
+
+	dev_dbg(&led->client->dev, "%s: %s, %d\n",
+		__func__, led_cdev->name, brightness);
+
+	led->status = brightness;
+	schedule_work(&led->work);
+}
+
+static void lp3944_led_work(struct work_struct *work)
+{
+	struct lp3944_led_data *led;
+
+	led = container_of(work, struct lp3944_led_data, work);
+	lp3944_led_set(led, led->status);
+}
+
+static int lp3944_configure(struct i2c_client *client,
+			    struct lp3944_data *data,
+			    struct lp3944_platform_data *pdata)
+{
+	int i, err = 0;
+
+	for (i = 0; i < pdata->leds_size; i++) {
+		struct lp3944_led *pled = &pdata->leds[i];
+		struct lp3944_led_data *led = &data->leds[i];
+		led->client = client;
+		led->id = i;
+
+		switch (pled->type) {
+
+		case LP3944_LED_TYPE_LED:
+		case LP3944_LED_TYPE_LED_INVERTED:
+			led->type = pled->type;
+			led->status = pled->status;
+			led->ldev.name = pled->name;
+			led->ldev.max_brightness = 1;
+			led->ldev.brightness_set = lp3944_led_set_brightness;
+			led->ldev.blink_set = lp3944_led_set_blink;
+			led->ldev.flags = LED_CORE_SUSPENDRESUME;
+
+			INIT_WORK(&led->work, lp3944_led_work);
+			err = led_classdev_register(&client->dev, &led->ldev);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"couldn't register LED %s\n",
+					led->ldev.name);
+				goto exit;
+			}
+
+			/* to expose the default value to userspace */
+			led->ldev.brightness = led->status;
+
+			/* Set the default led status */
+			err = lp3944_led_set(led, led->status);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"%s couldn't set STATUS %d\n",
+					led->ldev.name, led->status);
+				goto exit;
+			}
+			break;
+
+		case LP3944_LED_TYPE_NONE:
+		default:
+			break;
+
+		}
+	}
+	return 0;
+
+exit:
+	if (i > 0)
+		for (i = i - 1; i >= 0; i--)
+			switch (pdata->leds[i].type) {
+
+			case LP3944_LED_TYPE_LED:
+			case LP3944_LED_TYPE_LED_INVERTED:
+				led_classdev_unregister(&data->leds[i].ldev);
+				cancel_work_sync(&data->leds[i].work);
+				break;
+
+			case LP3944_LED_TYPE_NONE:
+			default:
+				break;
+			}
+
+	return err;
+}
+
+static int __devinit lp3944_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct lp3944_platform_data *lp3944_pdata = client->dev.platform_data;
+	struct lp3944_data *data;
+
+	if (lp3944_pdata == NULL) {
+		dev_err(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	/* Let's see whether this adapter can support what we need. */
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "insufficient functionality!\n");
+		return -ENODEV;
+	}
+
+	data = kzalloc(sizeof(struct lp3944_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	mutex_init(&data->lock);
+
+	dev_info(&client->dev, "lp3944 enabled\n");
+
+	lp3944_configure(client, data, lp3944_pdata);
+	return 0;
+}
+
+static int __devexit lp3944_remove(struct i2c_client *client)
+{
+	struct lp3944_platform_data *pdata = client->dev.platform_data;
+	struct lp3944_data *data = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < pdata->leds_size; i++)
+		switch (data->leds[i].type) {
+		case LP3944_LED_TYPE_LED:
+		case LP3944_LED_TYPE_LED_INVERTED:
+			led_classdev_unregister(&data->leds[i].ldev);
+			cancel_work_sync(&data->leds[i].work);
+			break;
+
+		case LP3944_LED_TYPE_NONE:
+		default:
+			break;
+		}
+
+	kfree(data);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+/* lp3944 i2c driver struct */
+static const struct i2c_device_id lp3944_id[] = {
+	{"lp3944", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp3944_id);
+
+static struct i2c_driver lp3944_driver = {
+	.driver   = {
+		   .name = "lp3944",
+	},
+	.probe    = lp3944_probe,
+	.remove   = __devexit_p(lp3944_remove),
+	.id_table = lp3944_id,
+};
+
+static int __init lp3944_module_init(void)
+{
+	return i2c_add_driver(&lp3944_driver);
+}
+
+static void __exit lp3944_module_exit(void)
+{
+	i2c_del_driver(&lp3944_driver);
+}
+
+module_init(lp3944_module_init);
+module_exit(lp3944_module_exit);
+
+MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
+MODULE_DESCRIPTION("LP3944 Fun Light Chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 3937244..dba8921 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -35,7 +35,7 @@
 	struct pca9532_led leds[16];
 	struct mutex update_lock;
 	struct input_dev    *idev;
-       struct work_struct work;
+	struct work_struct work;
 	u8 pwm[2];
 	u8 psc[2];
 };
@@ -87,14 +87,14 @@
 	if (b > 0xFF)
 		return -EINVAL;
 	data->pwm[pwm] = b;
-       data->psc[pwm] = blink;
-       return 0;
+	data->psc[pwm] = blink;
+	return 0;
 }
 
 static int pca9532_setpwm(struct i2c_client *client, int pwm)
 {
-       struct pca9532_data *data = i2c_get_clientdata(client);
-       mutex_lock(&data->update_lock);
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	mutex_lock(&data->update_lock);
 	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(pwm),
 		data->pwm[pwm]);
 	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(pwm),
@@ -132,11 +132,11 @@
 		led->state = PCA9532_ON;
 	else {
 		led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
-               err = pca9532_calcpwm(led->client, 0, 0, value);
+		err = pca9532_calcpwm(led->client, 0, 0, value);
 		if (err)
 			return; /* XXX: led api doesn't allow error code? */
 	}
-       schedule_work(&led->work);
+	schedule_work(&led->work);
 }
 
 static int pca9532_set_blink(struct led_classdev *led_cdev,
@@ -145,7 +145,7 @@
 	struct pca9532_led *led = ldev_to_led(led_cdev);
 	struct i2c_client *client = led->client;
 	int psc;
-       int err = 0;
+	int err = 0;
 
 	if (*delay_on == 0 && *delay_off == 0) {
 	/* led subsystem ask us for a blink rate */
@@ -157,11 +157,11 @@
 
 	/* Thecus specific: only use PSC/PWM 0 */
 	psc = (*delay_on * 152-1)/1000;
-       err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
-       if (err)
-               return err;
-       schedule_work(&led->work);
-       return 0;
+	err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+	if (err)
+		return err;
+	schedule_work(&led->work);
+	return 0;
 }
 
 static int pca9532_event(struct input_dev *dev, unsigned int type,
@@ -178,15 +178,15 @@
 	else
 		data->pwm[1] = 0;
 
-       schedule_work(&data->work);
+	schedule_work(&data->work);
 
-       return 0;
+	return 0;
 }
 
 static void pca9532_input_work(struct work_struct *work)
 {
-       struct pca9532_data *data;
-       data = container_of(work, struct pca9532_data, work);
+	struct pca9532_data *data;
+	data = container_of(work, struct pca9532_data, work);
 	mutex_lock(&data->update_lock);
 	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(1),
 		data->pwm[1]);
@@ -195,11 +195,11 @@
 
 static void pca9532_led_work(struct work_struct *work)
 {
-       struct pca9532_led *led;
-       led = container_of(work, struct pca9532_led, work);
-       if (led->state == PCA9532_PWM0)
-               pca9532_setpwm(led->client, 0);
-       pca9532_setled(led);
+	struct pca9532_led *led;
+	led = container_of(work, struct pca9532_led, work);
+	if (led->state == PCA9532_PWM0)
+		pca9532_setpwm(led->client, 0);
+	pca9532_setled(led);
 }
 
 static int pca9532_configure(struct i2c_client *client,
@@ -232,7 +232,7 @@
 			led->ldev.brightness = LED_OFF;
 			led->ldev.brightness_set = pca9532_set_brightness;
 			led->ldev.blink_set = pca9532_set_blink;
-                       INIT_WORK(&led->work, pca9532_led_work);
+			INIT_WORK(&led->work, pca9532_led_work);
 			err = led_classdev_register(&client->dev, &led->ldev);
 			if (err < 0) {
 				dev_err(&client->dev,
@@ -262,11 +262,11 @@
 						BIT_MASK(SND_TONE);
 			data->idev->event = pca9532_event;
 			input_set_drvdata(data->idev, data);
-                       INIT_WORK(&data->work, pca9532_input_work);
+			INIT_WORK(&data->work, pca9532_input_work);
 			err = input_register_device(data->idev);
 			if (err) {
 				input_free_device(data->idev);
-                               cancel_work_sync(&data->work);
+				cancel_work_sync(&data->work);
 				data->idev = NULL;
 				goto exit;
 			}
@@ -283,13 +283,13 @@
 				break;
 			case PCA9532_TYPE_LED:
 				led_classdev_unregister(&data->leds[i].ldev);
-                               cancel_work_sync(&data->leds[i].work);
+				cancel_work_sync(&data->leds[i].work);
 				break;
 			case PCA9532_TYPE_N2100_BEEP:
 				if (data->idev != NULL) {
 					input_unregister_device(data->idev);
 					input_free_device(data->idev);
-                                       cancel_work_sync(&data->work);
+					cancel_work_sync(&data->work);
 					data->idev = NULL;
 				}
 				break;
@@ -340,13 +340,13 @@
 			break;
 		case PCA9532_TYPE_LED:
 			led_classdev_unregister(&data->leds[i].ldev);
-                       cancel_work_sync(&data->leds[i].work);
+			cancel_work_sync(&data->leds[i].work);
 			break;
 		case PCA9532_TYPE_N2100_BEEP:
 			if (data->idev != NULL) {
 				input_unregister_device(data->idev);
 				input_free_device(data->idev);
-                               cancel_work_sync(&data->work);
+				cancel_work_sync(&data->work);
 				data->idev = NULL;
 			}
 			break;
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index d4e8979..9c31382 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -82,7 +82,7 @@
 
 struct lg_eventfd {
 	unsigned long addr;
-	struct file *event;
+	struct eventfd_ctx *event;
 };
 
 struct lg_eventfd_map {
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 32e2971..9f9a295 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -50,7 +50,7 @@
 
 	/* Now append new entry. */
 	new->map[new->num].addr = addr;
-	new->map[new->num].event = eventfd_fget(fd);
+	new->map[new->num].event = eventfd_ctx_fdget(fd);
 	if (IS_ERR(new->map[new->num].event)) {
 		kfree(new);
 		return PTR_ERR(new->map[new->num].event);
@@ -357,7 +357,7 @@
 
 	/* Release any eventfds they registered. */
 	for (i = 0; i < lg->eventfds->num; i++)
-		fput(lg->eventfds->map[i].event);
+		eventfd_ctx_put(lg->eventfds->map[i].event);
 	kfree(lg->eventfds);
 
 	/* If lg->dead doesn't contain an error code it will be NULL or a
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 6e149f4..a0f6838 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -378,6 +378,17 @@
 	dev->ofdev.dev.bus = &macio_bus_type;
 	dev->ofdev.dev.release = macio_release_dev;
 
+#ifdef CONFIG_PCI
+	/* Set the DMA ops to the ones from the PCI device, this could be
+	 * fishy if we didn't know that on PowerMac it's always direct ops
+	 * or iommu ops that will work fine
+	 */
+	dev->ofdev.dev.archdata.dma_ops =
+		chip->lbus.pdev->dev.archdata.dma_ops;
+	dev->ofdev.dev.archdata.dma_data =
+		chip->lbus.pdev->dev.archdata.dma_data;
+#endif /* CONFIG_PCI */
+
 #ifdef DEBUG
 	printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
 	       dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);
diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c
index c3ae515..3710ff8 100644
--- a/drivers/md/dm-exception-store.c
+++ b/drivers/md/dm-exception-store.c
@@ -195,7 +195,7 @@
 			      struct dm_exception_store **store)
 {
 	int r = 0;
-	struct dm_exception_store_type *type;
+	struct dm_exception_store_type *type = NULL;
 	struct dm_exception_store *tmp_store;
 	char persistent;
 
@@ -211,12 +211,15 @@
 	}
 
 	persistent = toupper(*argv[1]);
-	if (persistent != 'P' && persistent != 'N') {
+	if (persistent == 'P')
+		type = get_type("P");
+	else if (persistent == 'N')
+		type = get_type("N");
+	else {
 		ti->error = "Persistent flag is not P or N";
 		return -EINVAL;
 	}
 
-	type = get_type(&persistent);
 	if (!type) {
 		ti->error = "Exception store type not recognised";
 		r = -EINVAL;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 4899ebe..2cba557 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -495,7 +495,7 @@
 		return 0;
 	}
 
-	if (blk_stack_limits(limits, &q->limits, start) < 0)
+	if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
 		DMWARN("%s: target device %s is misaligned",
 		       dm_device_name(ti->table->md), bdevname(bdev, b));
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3c6d4ee..9acd54a 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1017,7 +1017,7 @@
 	clone->bi_flags |= 1 << BIO_CLONED;
 
 	if (bio_integrity(bio)) {
-		bio_integrity_clone(clone, bio, GFP_NOIO);
+		bio_integrity_clone(clone, bio, GFP_NOIO, bs);
 		bio_integrity_trim(clone,
 				   bio_sector_offset(bio, idx, offset), len);
 	}
@@ -1045,7 +1045,7 @@
 	clone->bi_flags &= ~(1 << BIO_SEG_VALID);
 
 	if (bio_integrity(bio)) {
-		bio_integrity_clone(clone, bio, GFP_NOIO);
+		bio_integrity_clone(clone, bio, GFP_NOIO, bs);
 
 		if (idx != bio->bi_idx || clone->bi_size < bio->bi_size)
 			bio_integrity_trim(clone,
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 15c8b7b..5810fa9 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -166,8 +166,8 @@
 			rdev->sectors = sectors * mddev->chunk_sectors;
 		}
 
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 09be637..0f4a70c4 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3573,7 +3573,8 @@
 	char *e;
 	unsigned long long new = simple_strtoull(buf, &e, 10);
 
-	if (mddev->pers->quiesce == NULL)
+	if (mddev->pers == NULL || 
+	    mddev->pers->quiesce == NULL)
 		return -EINVAL;
 	if (buf == e || (*e && *e != '\n'))
 		return -EINVAL;
@@ -3601,7 +3602,8 @@
 	char *e;
 	unsigned long long new = simple_strtoull(buf, &e, 10);
 
-	if (mddev->pers->quiesce == NULL)
+	if (mddev->pers == NULL ||
+	    mddev->pers->quiesce == NULL)
 		return -EINVAL;
 	if (buf == e || (*e && *e != '\n'))
 		return -EINVAL;
@@ -3844,11 +3846,9 @@
 	flush_scheduled_work();
 
 	mutex_lock(&disks_mutex);
-	if (mddev->gendisk) {
-		mutex_unlock(&disks_mutex);
-		mddev_put(mddev);
-		return -EEXIST;
-	}
+	error = -EEXIST;
+	if (mddev->gendisk)
+		goto abort;
 
 	if (name) {
 		/* Need to ensure that 'name' is not a duplicate.
@@ -3860,17 +3860,15 @@
 			if (mddev2->gendisk &&
 			    strcmp(mddev2->gendisk->disk_name, name) == 0) {
 				spin_unlock(&all_mddevs_lock);
-				return -EEXIST;
+				goto abort;
 			}
 		spin_unlock(&all_mddevs_lock);
 	}
 
+	error = -ENOMEM;
 	mddev->queue = blk_alloc_queue(GFP_KERNEL);
-	if (!mddev->queue) {
-		mutex_unlock(&disks_mutex);
-		mddev_put(mddev);
-		return -ENOMEM;
-	}
+	if (!mddev->queue)
+		goto abort;
 	mddev->queue->queuedata = mddev;
 
 	/* Can be unlocked because the queue is new: no concurrency */
@@ -3880,11 +3878,9 @@
 
 	disk = alloc_disk(1 << shift);
 	if (!disk) {
-		mutex_unlock(&disks_mutex);
 		blk_cleanup_queue(mddev->queue);
 		mddev->queue = NULL;
-		mddev_put(mddev);
-		return -ENOMEM;
+		goto abort;
 	}
 	disk->major = MAJOR(mddev->unit);
 	disk->first_minor = unit << shift;
@@ -3906,16 +3902,22 @@
 	mddev->gendisk = disk;
 	error = kobject_init_and_add(&mddev->kobj, &md_ktype,
 				     &disk_to_dev(disk)->kobj, "%s", "md");
-	mutex_unlock(&disks_mutex);
-	if (error)
+	if (error) {
+		/* This isn't possible, but as kobject_init_and_add is marked
+		 * __must_check, we must do something with the result
+		 */
 		printk(KERN_WARNING "md: cannot register %s/md - name in use\n",
 		       disk->disk_name);
-	else {
+		error = 0;
+	}
+ abort:
+	mutex_unlock(&disks_mutex);
+	if (!error) {
 		kobject_uevent(&mddev->kobj, KOBJ_ADD);
 		mddev->sysfs_state = sysfs_get_dirent(mddev->kobj.sd, "array_state");
 	}
 	mddev_put(mddev);
-	return 0;
+	return error;
 }
 
 static struct kobject *md_probe(dev_t dev, int *part, void *data)
@@ -6334,10 +6336,16 @@
 			sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 		}
 
-		if (j >= mddev->resync_max)
-			wait_event(mddev->recovery_wait,
-				   mddev->resync_max > j
-				   || kthread_should_stop());
+		while (j >= mddev->resync_max && !kthread_should_stop()) {
+			/* As this condition is controlled by user-space,
+			 * we can block indefinitely, so use '_interruptible'
+			 * to avoid triggering warnings.
+			 */
+			flush_signals(current); /* just in case */
+			wait_event_interruptible(mddev->recovery_wait,
+						 mddev->resync_max > j
+						 || kthread_should_stop());
+		}
 
 		if (kthread_should_stop())
 			goto interrupted;
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index cbe368f..237fe3f 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -294,7 +294,8 @@
 	for (path = first; path <= last; path++)
 		if ((p=conf->multipaths+path)->rdev == NULL) {
 			q = rdev->bdev->bd_disk->queue;
-			blk_queue_stack_limits(mddev->queue, q);
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
@@ -463,9 +464,9 @@
 
 		disk = conf->multipaths + disk_idx;
 		disk->rdev = rdev;
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, not that we ever expect a device with
 		 * a merge_bvec_fn to be involved in multipath */
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index ab4a489..335f490 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -170,8 +170,8 @@
 		}
 		dev[j] = rdev1;
 
-		blk_queue_stack_limits(mddev->queue,
-				       rdev1->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev1->bdev,
+				  rdev1->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
@@ -250,6 +250,11 @@
 		       mddev->chunk_sectors << 9);
 		goto abort;
 	}
+
+	blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
+	blk_queue_io_opt(mddev->queue,
+			 (mddev->chunk_sectors << 9) * mddev->raid_disks);
+
 	printk(KERN_INFO "raid0: done.\n");
 	mddev->private = conf;
 	return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 89939a7..0569efb 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1123,8 +1123,8 @@
 	for (mirror = first; mirror <= last; mirror++)
 		if ( !(p=conf->mirrors+mirror)->rdev) {
 
-			blk_queue_stack_limits(mddev->queue,
-					       rdev->bdev->bd_disk->queue);
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 			/* as we don't honour merge_bvec_fn, we must never risk
 			 * violating it, so limit ->max_sector to one PAGE, as
 			 * a one page request is never in violation.
@@ -1988,9 +1988,8 @@
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
-
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index ae12cea..7298a5e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1151,8 +1151,8 @@
 	for ( ; mirror <= last ; mirror++)
 		if ( !(p=conf->mirrors+mirror)->rdev) {
 
-			blk_queue_stack_limits(mddev->queue,
-					       rdev->bdev->bd_disk->queue);
+			disk_stack_limits(mddev->gendisk, rdev->bdev,
+					  rdev->data_offset << 9);
 			/* as we don't honour merge_bvec_fn, we must never risk
 			 * violating it, so limit ->max_sector to one PAGE, as
 			 * a one page request is never in violation.
@@ -2044,7 +2044,7 @@
 static int run(mddev_t *mddev)
 {
 	conf_t *conf;
-	int i, disk_idx;
+	int i, disk_idx, chunk_size;
 	mirror_info_t *disk;
 	mdk_rdev_t *rdev;
 	int nc, fc, fo;
@@ -2130,6 +2130,14 @@
 	spin_lock_init(&conf->device_lock);
 	mddev->queue->queue_lock = &conf->device_lock;
 
+	chunk_size = mddev->chunk_sectors << 9;
+	blk_queue_io_min(mddev->queue, chunk_size);
+	if (conf->raid_disks % conf->near_copies)
+		blk_queue_io_opt(mddev->queue, chunk_size * conf->raid_disks);
+	else
+		blk_queue_io_opt(mddev->queue, chunk_size *
+				 (conf->raid_disks / conf->near_copies));
+
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		disk_idx = rdev->raid_disk;
 		if (disk_idx >= mddev->raid_disks
@@ -2138,9 +2146,8 @@
 		disk = conf->mirrors + disk_idx;
 
 		disk->rdev = rdev;
-
-		blk_queue_stack_limits(mddev->queue,
-				       rdev->bdev->bd_disk->queue);
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk
 		 * violating it, so limit ->max_sector to one PAGE, as
 		 * a one page request is never in violation.
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f9f991e..3783553 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3699,13 +3699,21 @@
 					goto retry;
 				}
 			}
-			/* FIXME what if we get a false positive because these
-			 * are being updated.
-			 */
-			if (logical_sector >= mddev->suspend_lo &&
+
+			if (bio_data_dir(bi) == WRITE &&
+			    logical_sector >= mddev->suspend_lo &&
 			    logical_sector < mddev->suspend_hi) {
 				release_stripe(sh);
-				schedule();
+				/* As the suspend_* range is controlled by
+				 * userspace, we want an interruptible
+				 * wait.
+				 */
+				flush_signals(current);
+				prepare_to_wait(&conf->wait_for_overlap,
+						&w, TASK_INTERRUPTIBLE);
+				if (logical_sector >= mddev->suspend_lo &&
+				    logical_sector < mddev->suspend_hi)
+					schedule();
 				goto retry;
 			}
 
@@ -4452,7 +4460,7 @@
 static int run(mddev_t *mddev)
 {
 	raid5_conf_t *conf;
-	int working_disks = 0;
+	int working_disks = 0, chunk_size;
 	mdk_rdev_t *rdev;
 
 	if (mddev->recovery_cp != MaxSector)
@@ -4607,6 +4615,14 @@
 	md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
 
 	blk_queue_merge_bvec(mddev->queue, raid5_mergeable_bvec);
+	chunk_size = mddev->chunk_sectors << 9;
+	blk_queue_io_min(mddev->queue, chunk_size);
+	blk_queue_io_opt(mddev->queue, chunk_size *
+			 (conf->raid_disks - conf->max_degraded));
+
+	list_for_each_entry(rdev, &mddev->disks, same_set)
+		disk_stack_limits(mddev->gendisk, rdev->bdev,
+				  rdev->data_offset << 9);
 
 	return 0;
 abort:
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 240608c..a461017 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1313,6 +1313,12 @@
 	struct mmc_spi_host	*host;
 	int			status;
 
+	/* We rely on full duplex transfers, mostly to reduce
+	 * per-transfer overheads (by making fewer transfers).
+	 */
+	if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
+		return -EINVAL;
+
 	/* MMC and SD specs only seem to care that sampling is on the
 	 * rising edge ... meaning SPI modes 0 or 3.  So either SPI mode
 	 * should be legit.  We'll use mode 0 since the steady state is 0,
diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c
index e4afbd6..607007d 100644
--- a/drivers/net/atl1c/atl1c_ethtool.c
+++ b/drivers/net/atl1c/atl1c_ethtool.c
@@ -281,6 +281,8 @@
 	if (wol->wolopts & WAKE_PHY)
 		adapter->wol |= AT_WUFC_LNKC;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 619c658..4003955 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -365,6 +365,8 @@
 	if (wol->wolopts & WAKE_PHY)
 		adapter->wol |= AT_WUFC_LNKC;
 
+	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
 	return 0;
 }
 
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index f703758..5b4bf3d 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -73,7 +73,7 @@
 #define RX_FRAGS_REFILL_WM	(RX_Q_LEN - MAX_RX_POST)
 
 #define BE_MAX_LRO_DESCRIPTORS  16
-#define BE_MAX_FRAGS_PER_FRAME  16
+#define BE_MAX_FRAGS_PER_FRAME  (min((u32) 16, (u32) MAX_SKB_FRAGS))
 
 struct be_dma_mem {
 	void *va;
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 9592f22..cccc541 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -162,8 +162,8 @@
 		return -EINVAL;
 
 	adapter->max_rx_coal = coalesce->rx_max_coalesced_frames;
-	if (adapter->max_rx_coal > MAX_SKB_FRAGS)
-		adapter->max_rx_coal = MAX_SKB_FRAGS - 1;
+	if (adapter->max_rx_coal > BE_MAX_FRAGS_PER_FRAME)
+		adapter->max_rx_coal = BE_MAX_FRAGS_PER_FRAME;
 
 	/* if AIC is being turned on now, start with an EQD of 0 */
 	if (rx_eq->enable_aic == 0 &&
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 66c10c8..308eb09 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -666,7 +666,7 @@
 {
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	struct be_rx_page_info *page_info;
-	u16 rxq_idx, i, num_rcvd;
+	u16 rxq_idx, i, num_rcvd, j;
 	u32 pktsize, hdr_len, curr_frag_len;
 	u8 *start;
 
@@ -709,22 +709,33 @@
 
 	/* More frags present for this completion */
 	pktsize -= curr_frag_len; /* account for above copied frag */
-	for (i = 1; i < num_rcvd; i++) {
+	for (i = 1, j = 0; i < num_rcvd; i++) {
 		index_inc(&rxq_idx, rxq->len);
 		page_info = get_rx_page_info(adapter, rxq_idx);
 
 		curr_frag_len = min(pktsize, rx_frag_size);
 
-		skb_shinfo(skb)->frags[i].page = page_info->page;
-		skb_shinfo(skb)->frags[i].page_offset = page_info->page_offset;
-		skb_shinfo(skb)->frags[i].size = curr_frag_len;
+		/* Coalesce all frags from the same physical page in one slot */
+		if (page_info->page_offset == 0) {
+			/* Fresh page */
+			j++;
+			skb_shinfo(skb)->frags[j].page = page_info->page;
+			skb_shinfo(skb)->frags[j].page_offset =
+							page_info->page_offset;
+			skb_shinfo(skb)->frags[j].size = 0;
+			skb_shinfo(skb)->nr_frags++;
+		} else {
+			put_page(page_info->page);
+		}
+
+		skb_shinfo(skb)->frags[j].size += curr_frag_len;
 		skb->len += curr_frag_len;
 		skb->data_len += curr_frag_len;
-		skb_shinfo(skb)->nr_frags++;
 		pktsize -= curr_frag_len;
 
 		memset(page_info, 0, sizeof(*page_info));
 	}
+	BUG_ON(j > MAX_SKB_FRAGS);
 
 done:
 	be_rx_stats_update(adapter, pktsize, num_rcvd);
@@ -786,7 +797,7 @@
 	struct skb_frag_struct rx_frags[BE_MAX_FRAGS_PER_FRAME];
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
-	u16 i, rxq_idx = 0, vid;
+	u16 i, rxq_idx = 0, vid, j;
 
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
 	pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
@@ -794,20 +805,28 @@
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
 
 	remaining = pkt_size;
-	for (i = 0; i < num_rcvd; i++) {
+	for (i = 0, j = -1; i < num_rcvd; i++) {
 		page_info = get_rx_page_info(adapter, rxq_idx);
 
 		curr_frag_len = min(remaining, rx_frag_size);
 
-		rx_frags[i].page = page_info->page;
-		rx_frags[i].page_offset = page_info->page_offset;
-		rx_frags[i].size = curr_frag_len;
+		/* Coalesce all frags from the same physical page in one slot */
+		if (i == 0 || page_info->page_offset == 0) {
+			/* First frag or Fresh page */
+			j++;
+			rx_frags[j].page = page_info->page;
+			rx_frags[j].page_offset = page_info->page_offset;
+			rx_frags[j].size = 0;
+		} else {
+			put_page(page_info->page);
+		}
+		rx_frags[j].size += curr_frag_len;
+
 		remaining -= curr_frag_len;
-
 		index_inc(&rxq_idx, rxq->len);
-
 		memset(page_info, 0, sizeof(*page_info));
 	}
+	BUG_ON(j > MAX_SKB_FRAGS);
 
 	if (likely(!vlanf)) {
 		lro_receive_frags(&adapter->rx_obj.lro_mgr, rx_frags, pkt_size,
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index fbf1352..951714a 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -8637,6 +8637,14 @@
 	return 0;
 }
 
+static u32
+bnx2x_get_link(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	return bp->link_vars.link_up;
+}
+
 static int bnx2x_get_eeprom_len(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -10034,7 +10042,7 @@
 	.get_msglevel		= bnx2x_get_msglevel,
 	.set_msglevel		= bnx2x_set_msglevel,
 	.nway_reset		= bnx2x_nway_reset,
-	.get_link		= ethtool_op_get_link,
+	.get_link		= bnx2x_get_link,
 	.get_eeprom_len		= bnx2x_get_eeprom_len,
 	.get_eeprom		= bnx2x_get_eeprom,
 	.set_eeprom		= bnx2x_set_eeprom,
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 58afafb..fd5e32c 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1097,7 +1097,7 @@
 	.ndo_start_xmit		= cpmac_start_xmit,
 	.ndo_tx_timeout		= cpmac_tx_timeout,
 	.ndo_set_multicast_list	= cpmac_set_multicast_list,
-	.ndo_so_ioctl		= cpmac_ioctl,
+	.ndo_do_ioctl		= cpmac_ioctl,
 	.ndo_set_config		= cpmac_config,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5e3356f..5b8cbdb 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2185,12 +2185,16 @@
 	/* Free all the Rx ring sk_buffs */
 	for (i = 0; i < rx_ring->count; i++) {
 		buffer_info = &rx_ring->buffer_info[i];
-		if (buffer_info->skb) {
+		if (buffer_info->dma) {
 			pci_unmap_single(pdev,
 					 buffer_info->dma,
 					 buffer_info->length,
 					 PCI_DMA_FROMDEVICE);
+		}
 
+		buffer_info->dma = 0;
+
+		if (buffer_info->skb) {
 			dev_kfree_skb(buffer_info->skb);
 			buffer_info->skb = NULL;
 		}
@@ -4033,6 +4037,7 @@
 		                 buffer_info->dma,
 		                 buffer_info->length,
 		                 PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
 
 		length = le16_to_cpu(rx_desc->length);
 		/* !EOP means multiple descriptors were used to store a single
@@ -4222,6 +4227,7 @@
 			pci_unmap_single(pdev, buffer_info->dma,
 					 adapter->rx_buffer_len,
 					 PCI_DMA_FROMDEVICE);
+			buffer_info->dma = 0;
 
 			break; /* while !buffer_info->skb */
 		}
@@ -4817,6 +4823,9 @@
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		e1000_down(adapter);
 	pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 679885a..63415bb 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4785,6 +4785,9 @@
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		e1000e_down(adapter);
 	pci_disable_device(pdev);
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 3af5813..d167090 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -188,7 +188,7 @@
 }
 
 
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
 static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
 {
 	struct gfar __iomem *enet_regs;
@@ -206,7 +206,7 @@
 #endif
 
 
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
 static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
 {
 	struct device_node *np = NULL;
@@ -291,7 +291,7 @@
 	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
 			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
 			of_device_is_compatible(np, "gianfar")) {
-#ifdef CONFIG_GIANFAR
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
 		tbipa = get_gfar_tbipa(regs);
 #else
 		err = -ENODEV;
@@ -299,7 +299,7 @@
 #endif
 	} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
 			of_device_is_compatible(np, "ucc_geth_phy")) {
-#ifdef CONFIG_UCC_GETH
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
 		u32 id;
 		static u32 mii_mng_master;
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index ea17319..be48029 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -4549,11 +4549,12 @@
 		cleaned = true;
 		cleaned_count++;
 
+		/* this is the fast path for the non-packet split case */
 		if (!adapter->rx_ps_hdr_size) {
 			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_buffer_len +
-					   NET_IP_ALIGN,
+					 adapter->rx_buffer_len,
 					 PCI_DMA_FROMDEVICE);
+			buffer_info->dma = 0;
 			skb_put(skb, length);
 			goto send_up;
 		}
@@ -4570,8 +4571,9 @@
 
 		if (!skb_shinfo(skb)->nr_frags) {
 			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_ps_hdr_size + NET_IP_ALIGN,
+					 adapter->rx_ps_hdr_size,
 					 PCI_DMA_FROMDEVICE);
+			buffer_info->dma = 0;
 			skb_put(skb, hlen);
 		}
 
@@ -4713,7 +4715,6 @@
 		bufsz = adapter->rx_ps_hdr_size;
 	else
 		bufsz = adapter->rx_buffer_len;
-	bufsz += NET_IP_ALIGN;
 
 	while (cleaned_count--) {
 		rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
@@ -4737,7 +4738,7 @@
 		}
 
 		if (!buffer_info->skb) {
-			skb = netdev_alloc_skb(netdev, bufsz);
+			skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
 				goto no_buffers;
@@ -5338,6 +5339,9 @@
 
 	netif_device_detach(netdev);
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	if (netif_running(netdev))
 		igb_down(adapter);
 	pci_disable_device(pdev);
diff --git a/drivers/net/irda/bfin_sir.c b/drivers/net/irda/bfin_sir.c
index f3eed6a..911c082 100644
--- a/drivers/net/irda/bfin_sir.c
+++ b/drivers/net/irda/bfin_sir.c
@@ -677,6 +677,14 @@
 	return 0;
 }
 
+static const struct net_device_ops bfin_sir_ndo = {
+	.ndo_open		= bfin_sir_open,
+	.ndo_stop		= bfin_sir_stop,
+	.ndo_start_xmit		= bfin_sir_hard_xmit,
+	.ndo_do_ioctl		= bfin_sir_ioctl,
+	.ndo_get_stats		= bfin_sir_stats,
+};
+
 static int __devinit bfin_sir_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
@@ -718,12 +726,8 @@
 	if (err)
 		goto err_mem_3;
 
-	dev->hard_start_xmit = bfin_sir_hard_xmit;
-	dev->open            = bfin_sir_open;
-	dev->stop            = bfin_sir_stop;
-	dev->do_ioctl        = bfin_sir_ioctl;
-	dev->get_stats       = bfin_sir_stats;
-	dev->irq             = sir_port->irq;
+	dev->netdev_ops = &bfin_sir_ndo;
+	dev->irq = sir_port->irq;
 
 	irda_init_max_qos_capabilies(&self->qos);
 
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 86f4f3e..0f7b6a3 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -139,7 +139,7 @@
 	ecmd->autoneg = AUTONEG_ENABLE;
 	ecmd->transceiver = XCVR_EXTERNAL;
 	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
-	    (hw->mac.type == ixgbe_mac_82599EB)) {
+	    (hw->phy.multispeed_fiber)) {
 		ecmd->supported |= (SUPPORTED_1000baseT_Full |
 		                    SUPPORTED_Autoneg);
 
@@ -217,7 +217,7 @@
 	s32 err = 0;
 
 	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
-	    (hw->mac.type == ixgbe_mac_82599EB)) {
+	    (hw->phy.multispeed_fiber)) {
 		/* 10000/copper and 1000/copper must autoneg
 		 * this function does not support any duplex forcing, but can
 		 * limit the advertising of the adapter to only 10000 or 1000 */
@@ -245,6 +245,7 @@
 	} else {
 		/* in this case we currently only support 10Gb/FULL */
 		if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+		    (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
 		    (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
 			return -EINVAL;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e756e22..5588ef4 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -563,7 +563,6 @@
 	union ixgbe_adv_rx_desc *rx_desc;
 	struct ixgbe_rx_buffer *bi;
 	unsigned int i;
-	unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
 
 	i = rx_ring->next_to_use;
 	bi = &rx_ring->rx_buffer_info[i];
@@ -593,7 +592,9 @@
 
 		if (!bi->skb) {
 			struct sk_buff *skb;
-			skb = netdev_alloc_skb(adapter->netdev, bufsz);
+			skb = netdev_alloc_skb(adapter->netdev,
+			                       (rx_ring->rx_buf_len +
+			                        NET_IP_ALIGN));
 
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
@@ -608,7 +609,8 @@
 			skb_reserve(skb, NET_IP_ALIGN);
 
 			bi->skb = skb;
-			bi->dma = pci_map_single(pdev, skb->data, bufsz,
+			bi->dma = pci_map_single(pdev, skb->data,
+			                         rx_ring->rx_buf_len,
 			                         PCI_DMA_FROMDEVICE);
 		}
 		/* Refresh the desc even if buffer_addrs didn't change because
@@ -732,6 +734,7 @@
 			pci_unmap_single(pdev, rx_buffer_info->dma,
 			                 rx_ring->rx_buf_len,
 			                 PCI_DMA_FROMDEVICE);
+			rx_buffer_info->dma = 0;
 			skb_put(skb, len);
 		}
 
@@ -2701,7 +2704,10 @@
 	 */
 	err = hw->phy.ops.identify(hw);
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
+		dev_err(&adapter->pdev->dev, "failed to initialize because "
+			"an unsupported SFP+ module type was detected.\n"
+			"Reload the driver after installing a supported "
+			"module.\n");
 		ixgbe_down(adapter);
 		return err;
 	}
@@ -2812,9 +2818,11 @@
 		}
 		if (!rx_buffer_info->page)
 			continue;
-		pci_unmap_page(pdev, rx_buffer_info->page_dma, PAGE_SIZE / 2,
-		               PCI_DMA_FROMDEVICE);
-		rx_buffer_info->page_dma = 0;
+		if (rx_buffer_info->page_dma) {
+			pci_unmap_page(pdev, rx_buffer_info->page_dma,
+			               PAGE_SIZE / 2, PCI_DMA_FROMDEVICE);
+			rx_buffer_info->page_dma = 0;
+		}
 		put_page(rx_buffer_info->page);
 		rx_buffer_info->page = NULL;
 		rx_buffer_info->page_offset = 0;
@@ -3720,10 +3728,11 @@
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-			DPRINTK(PROBE, ERR, "failed to initialize because an "
-			        "unsupported SFP+ module type was detected.\n"
-			        "Reload the driver after installing a "
-			        "supported module.\n");
+			dev_err(&adapter->pdev->dev, "failed to initialize "
+				"because an unsupported SFP+ module type "
+				"was detected.\n"
+				"Reload the driver after installing a "
+				"supported module.\n");
 			unregister_netdev(adapter->netdev);
 		} else {
 			DPRINTK(PROBE, INFO, "detected SFP+: %d\n",
@@ -4502,7 +4511,8 @@
 	u32 autoneg;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK;
-	if (hw->mac.ops.get_link_capabilities)
+	autoneg = hw->phy.autoneg_advertised;
+	if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
 		hw->mac.ops.get_link_capabilities(hw, &autoneg,
 		                                  &hw->mac.autoneg);
 	if (hw->mac.ops.setup_link_speed)
@@ -4526,7 +4536,10 @@
 	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
 	err = hw->phy.ops.identify_sfp(hw);
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		DPRINTK(PROBE, ERR, "PHY not supported on this NIC %d\n", err);
+		dev_err(&adapter->pdev->dev, "failed to initialize because "
+			"an unsupported SFP+ module type was detected.\n"
+			"Reload the driver after installing a supported "
+			"module.\n");
 		ixgbe_down(adapter);
 		return;
 	}
@@ -5513,8 +5526,10 @@
 			  round_jiffies(jiffies + (2 * HZ)));
 		err = 0;
 	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		dev_err(&adapter->pdev->dev, "failed to load because an "
-		        "unsupported SFP+ module type was detected.\n");
+		dev_err(&adapter->pdev->dev, "failed to initialize because "
+			"an unsupported SFP+ module type was detected.\n"
+			"Reload the driver after installing a supported "
+			"module.\n");
 		goto err_sw_init;
 	} else if (err) {
 		dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index dc45e98..6851bdb 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -14,6 +14,10 @@
 #include <linux/mdio.h>
 #include <linux/module.h>
 
+MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
+MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
+MODULE_LICENSE("GPL");
+
 /**
  * mdio45_probe - probe for an MDIO (clause 45) device
  * @mdio: MDIO interface
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 341882f..a2d82dd 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -865,8 +865,7 @@
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	struct sh_eth_cpu_data *cd = mdp->cd;
 	irqreturn_t ret = IRQ_NONE;
-	u32 ioaddr, boguscnt = RX_RING_SIZE;
-	u32 intr_status = 0;
+	u32 ioaddr, intr_status = 0;
 
 	ioaddr = ndev->base_addr;
 	spin_lock(&mdp->lock);
@@ -901,12 +900,6 @@
 	if (intr_status & cd->eesr_err_check)
 		sh_eth_error(ndev, intr_status);
 
-	if (--boguscnt < 0) {
-		printk(KERN_WARNING
-		       "%s: Too much work at interrupt, status=0x%4.4x.\n",
-		       ndev->name, intr_status);
-	}
-
 other_irq:
 	spin_unlock(&mdp->lock);
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7681d28..daf961a 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2495,7 +2495,7 @@
 			if (likely(status >> 16 == (status & 0xffff))) {
 				skb = sky2->rx_ring[sky2->rx_next].skb;
 				skb->ip_summed = CHECKSUM_COMPLETE;
-				skb->csum = status & 0xffff;
+				skb->csum = le16_to_cpu(status);
 			} else {
 				printk(KERN_NOTICE PFX "%s: hardware receive "
 				       "checksum problem (status = %#x)\n",
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 80e0177..cd35d50 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -319,7 +319,7 @@
 				return crc == crc2;
 
 			if (unlikely(crc != crc2)) {
-				dev->stats.rx_errors++;
+				dev->net->stats.rx_errors++;
 				dev_kfree_skb_any(skb2);
 			} else
 				usbnet_skb_return(dev, skb2);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 7ae8244..1d3730d 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -513,11 +513,11 @@
 	len = (skb->data[1] | (skb->data[2] << 8)) - 4;
 
 	if (unlikely(status & 0xbf)) {
-		if (status & 0x01) dev->stats.rx_fifo_errors++;
-		if (status & 0x02) dev->stats.rx_crc_errors++;
-		if (status & 0x04) dev->stats.rx_frame_errors++;
-		if (status & 0x20) dev->stats.rx_missed_errors++;
-		if (status & 0x90) dev->stats.rx_length_errors++;
+		if (status & 0x01) dev->net->stats.rx_fifo_errors++;
+		if (status & 0x02) dev->net->stats.rx_crc_errors++;
+		if (status & 0x04) dev->net->stats.rx_frame_errors++;
+		if (status & 0x20) dev->net->stats.rx_missed_errors++;
+		if (status & 0x90) dev->net->stats.rx_length_errors++;
 		return 0;
 	}
 
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index 034e8a7..aeb1ab0 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -433,7 +433,7 @@
 		dbg("rx framesize %d range %d..%d mtu %d", skb->len,
 			net->hard_header_len, dev->hard_mtu, net->mtu);
 #endif
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		nc_ensure_sync(dev);
 		return 0;
 	}
@@ -442,12 +442,12 @@
 	hdr_len = le16_to_cpup(&header->hdr_len);
 	packet_len = le16_to_cpup(&header->packet_len);
 	if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		dbg("packet too big, %d", packet_len);
 		nc_ensure_sync(dev);
 		return 0;
 	} else if (hdr_len < MIN_HEADER) {
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		dbg("header too short, %d", hdr_len);
 		nc_ensure_sync(dev);
 		return 0;
@@ -465,21 +465,21 @@
 
 	if ((packet_len & 0x01) == 0) {
 		if (skb->data [packet_len] != PAD_BYTE) {
-			dev->stats.rx_frame_errors++;
+			dev->net->stats.rx_frame_errors++;
 			dbg("bad pad");
 			return 0;
 		}
 		skb_trim(skb, skb->len - 1);
 	}
 	if (skb->len != packet_len) {
-		dev->stats.rx_frame_errors++;
+		dev->net->stats.rx_frame_errors++;
 		dbg("bad packet len %d (expected %d)",
 			skb->len, packet_len);
 		nc_ensure_sync(dev);
 		return 0;
 	}
 	if (header->packet_id != get_unaligned(&trailer->packet_id)) {
-		dev->stats.rx_fifo_errors++;
+		dev->net->stats.rx_fifo_errors++;
 		dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
 			le16_to_cpu(header->packet_id),
 			le16_to_cpu(trailer->packet_id));
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 1bf243e..2232232 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -487,7 +487,7 @@
 		if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
 				|| skb->len < msg_len
 				|| (data_offset + data_len + 8) > msg_len)) {
-			dev->stats.rx_frame_errors++;
+			dev->net->stats.rx_frame_errors++;
 			devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
 				le32_to_cpu(hdr->msg_type),
 				msg_len, data_offset, data_len, skb->len);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 89a91f8..fe04589 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1108,18 +1108,18 @@
 		if (unlikely(header & RX_STS_ES_)) {
 			if (netif_msg_rx_err(dev))
 				devdbg(dev, "Error header=0x%08x", header);
-			dev->stats.rx_errors++;
-			dev->stats.rx_dropped++;
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
 
 			if (header & RX_STS_CRC_) {
-				dev->stats.rx_crc_errors++;
+				dev->net->stats.rx_crc_errors++;
 			} else {
 				if (header & (RX_STS_TL_ | RX_STS_RF_))
-					dev->stats.rx_frame_errors++;
+					dev->net->stats.rx_frame_errors++;
 
 				if ((header & RX_STS_LE_) &&
 					(!(header & RX_STS_FT_)))
-					dev->stats.rx_length_errors++;
+					dev->net->stats.rx_length_errors++;
 			}
 		} else {
 			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 22c0585..edfd9e1 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -234,8 +234,8 @@
 	int	status;
 
 	skb->protocol = eth_type_trans (skb, dev->net);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
+	dev->net->stats.rx_packets++;
+	dev->net->stats.rx_bytes += skb->len;
 
 	if (netif_msg_rx_status (dev))
 		devdbg (dev, "< rx, len %zu, type 0x%x",
@@ -397,7 +397,7 @@
 		if (netif_msg_rx_err (dev))
 			devdbg (dev, "drop");
 error:
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		skb_queue_tail (&dev->done, skb);
 	}
 }
@@ -420,8 +420,8 @@
 	case 0:
 		if (skb->len < dev->net->hard_header_len) {
 			entry->state = rx_cleanup;
-			dev->stats.rx_errors++;
-			dev->stats.rx_length_errors++;
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_length_errors++;
 			if (netif_msg_rx_err (dev))
 				devdbg (dev, "rx length %d", skb->len);
 		}
@@ -433,7 +433,7 @@
 	 * storm, recovering as needed.
 	 */
 	case -EPIPE:
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		usbnet_defer_kevent (dev, EVENT_RX_HALT);
 		// FALLTHROUGH
 
@@ -451,7 +451,7 @@
 	case -EPROTO:
 	case -ETIME:
 	case -EILSEQ:
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		if (!timer_pending (&dev->delay)) {
 			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
 			if (netif_msg_link (dev))
@@ -465,12 +465,12 @@
 
 	/* data overrun ... flush fifo? */
 	case -EOVERFLOW:
-		dev->stats.rx_over_errors++;
+		dev->net->stats.rx_over_errors++;
 		// FALLTHROUGH
 
 	default:
 		entry->state = rx_cleanup;
-		dev->stats.rx_errors++;
+		dev->net->stats.rx_errors++;
 		if (netif_msg_rx_err (dev))
 			devdbg (dev, "rx status %d", urb_status);
 		break;
@@ -583,8 +583,8 @@
 
 	if (netif_msg_ifdown (dev))
 		devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
-			dev->stats.rx_packets, dev->stats.tx_packets,
-			dev->stats.rx_errors, dev->stats.tx_errors
+			net->stats.rx_packets, net->stats.tx_packets,
+			net->stats.rx_errors, net->stats.tx_errors
 			);
 
 	// ensure there are no more active urbs
@@ -891,10 +891,10 @@
 	struct usbnet		*dev = entry->dev;
 
 	if (urb->status == 0) {
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += entry->length;
+		dev->net->stats.tx_packets++;
+		dev->net->stats.tx_bytes += entry->length;
 	} else {
-		dev->stats.tx_errors++;
+		dev->net->stats.tx_errors++;
 
 		switch (urb->status) {
 		case -EPIPE:
@@ -1020,7 +1020,7 @@
 			devdbg (dev, "drop, code %d", retval);
 drop:
 		retval = NET_XMIT_SUCCESS;
-		dev->stats.tx_dropped++;
+		dev->net->stats.tx_dropped++;
 		if (skb)
 			dev_kfree_skb_any (skb);
 		usb_free_urb (urb);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 87197dd..1097c72 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -208,11 +208,14 @@
 
 static struct net_device_stats *veth_get_stats(struct net_device *dev)
 {
-	struct veth_priv *priv = netdev_priv(dev);
-	struct net_device_stats *dev_stats = &dev->stats;
-	unsigned int cpu;
+	struct veth_priv *priv;
+	struct net_device_stats *dev_stats;
+	int cpu;
 	struct veth_net_stats *stats;
 
+	priv = netdev_priv(dev);
+	dev_stats = &dev->stats;
+
 	dev_stats->rx_packets = 0;
 	dev_stats->tx_packets = 0;
 	dev_stats->rx_bytes = 0;
@@ -220,17 +223,16 @@
 	dev_stats->tx_dropped = 0;
 	dev_stats->rx_dropped = 0;
 
-	if (priv->stats)
-		for_each_online_cpu(cpu) {
-			stats = per_cpu_ptr(priv->stats, cpu);
+	for_each_online_cpu(cpu) {
+		stats = per_cpu_ptr(priv->stats, cpu);
 
-			dev_stats->rx_packets += stats->rx_packets;
-			dev_stats->tx_packets += stats->tx_packets;
-			dev_stats->rx_bytes += stats->rx_bytes;
-			dev_stats->tx_bytes += stats->tx_bytes;
-			dev_stats->tx_dropped += stats->tx_dropped;
-			dev_stats->rx_dropped += stats->rx_dropped;
-		}
+		dev_stats->rx_packets += stats->rx_packets;
+		dev_stats->tx_packets += stats->tx_packets;
+		dev_stats->rx_bytes += stats->rx_bytes;
+		dev_stats->tx_bytes += stats->tx_bytes;
+		dev_stats->tx_dropped += stats->tx_dropped;
+		dev_stats->rx_dropped += stats->rx_dropped;
+	}
 
 	return dev_stats;
 }
@@ -257,8 +259,6 @@
 	netif_carrier_off(dev);
 	netif_carrier_off(priv->peer);
 
-	free_percpu(priv->stats);
-	priv->stats = NULL;
 	return 0;
 }
 
@@ -289,6 +289,15 @@
 	return 0;
 }
 
+static void veth_dev_free(struct net_device *dev)
+{
+	struct veth_priv *priv;
+
+	priv = netdev_priv(dev);
+	free_percpu(priv->stats);
+	free_netdev(dev);
+}
+
 static const struct net_device_ops veth_netdev_ops = {
 	.ndo_init            = veth_dev_init,
 	.ndo_open            = veth_open,
@@ -306,7 +315,7 @@
 	dev->netdev_ops = &veth_netdev_ops;
 	dev->ethtool_ops = &veth_ethtool_ops;
 	dev->features |= NETIF_F_LLTX;
-	dev->destructor = free_netdev;
+	dev->destructor = veth_dev_free;
 }
 
 /*
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 1032d5f..2597145 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2907,6 +2907,7 @@
 	netmos_9755,
 	netmos_9805,
 	netmos_9815,
+	netmos_9901,
 	quatech_sppxp100,
 };
 
@@ -2987,7 +2988,7 @@
 	/* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} },
 	/* netmos_9805 */               { 1, { { 0, -1 }, } },
 	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
-
+	/* netmos_9901 */               { 1, { { 0, -1 }, } },
 	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
 };
 
@@ -3089,6 +3090,8 @@
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
 	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+	  0xA000, 0x2000, 0, 0, netmos_9901 },
 	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
 	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index e53eacd..420afa8 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,7 +39,6 @@
 #include <linux/sysdev.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
-#include <asm/e820.h>
 #include "pci.h"
 
 #define ROOT_SIZE		VTD_PAGE_SIZE
@@ -1908,7 +1907,6 @@
 		rmrr->end_address + 1);
 }
 
-#ifdef CONFIG_DMAR_GFX_WA
 struct iommu_prepare_data {
 	struct pci_dev *pdev;
 	int ret;
@@ -1943,6 +1941,7 @@
 	return data.ret;
 }
 
+#ifdef CONFIG_DMAR_GFX_WA
 static void __init iommu_prepare_gfx_mapping(void)
 {
 	struct pci_dev *pdev = NULL;
@@ -2081,7 +2080,6 @@
 
 static int iommu_prepare_static_identity_mapping(void)
 {
-	int i;
 	struct pci_dev *pdev = NULL;
 	int ret;
 
@@ -2091,17 +2089,10 @@
 
 	printk(KERN_INFO "IOMMU: Setting identity map:\n");
 	for_each_pci_dev(pdev) {
-		for (i = 0; i < e820.nr_map; i++) {
-			struct e820entry *ei = &e820.map[i];
-
-			if (ei->type == E820_RAM) {
-				ret = iommu_prepare_identity_map(pdev,
-					ei->addr, ei->addr + ei->size);
-				if (ret)  {
-					printk(KERN_INFO "1:1 mapping to one domain failed.\n");
-					return -EFAULT;
-				}
-			}
+		ret = iommu_prepare_with_active_regions(pdev);
+		if (ret) {
+			printk(KERN_INFO "1:1 mapping to one domain failed.\n");
+			return -EFAULT;
 		}
 		ret = domain_add_dev_info(si_domain, pdev);
 		if (ret)
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 2287116..46dd440 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -1,9 +1,19 @@
 /*
- * Copyright (c) 2006, Intel Corporation.
+ * Copyright © 2006-2009, Intel Corporation.
  *
- * This file is released under the GPLv2.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
  *
- * Copyright (C) 2006-2008 Intel Corporation
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
  * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
  */
 
@@ -123,7 +133,15 @@
 	/* Insert the new_iova into domain rbtree by holding writer lock */
 	/* Add new node and rebalance tree. */
 	{
-		struct rb_node **entry = &((prev)), *parent = NULL;
+		struct rb_node **entry, *parent = NULL;
+
+		/* If we have 'prev', it's a valid place to start the
+		   insertion. Otherwise, start from the root. */
+		if (prev)
+			entry = &prev;
+		else
+			entry = &iovad->rbroot.rb_node;
+
 		/* Figure out where to put new node */
 		while (*entry) {
 			struct iova *this = container_of(*entry,
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 7232fe7..46dad12 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -355,6 +355,7 @@
 	depends on INPUT
 	depends on EXPERIMENTAL
 	depends on RFKILL || RFKILL = n
+	depends on HOTPLUG_PCI
 	select BACKLIGHT_CLASS_DEVICE
 	select HWMON
 	---help---
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 4207b26..ec560f1 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -16,6 +16,8 @@
  *  GNU General Public License for more details.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -31,6 +33,7 @@
 #include <linux/input.h>
 #include <linux/rfkill.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 
 #define EEEPC_LAPTOP_VERSION	"0.1"
 
@@ -40,11 +43,6 @@
 #define EEEPC_HOTK_DEVICE_NAME	"Hotkey"
 #define EEEPC_HOTK_HID		"ASUS010"
 
-#define EEEPC_LOG	EEEPC_HOTK_FILE ": "
-#define EEEPC_ERR	KERN_ERR	EEEPC_LOG
-#define EEEPC_WARNING	KERN_WARNING	EEEPC_LOG
-#define EEEPC_NOTICE	KERN_NOTICE	EEEPC_LOG
-#define EEEPC_INFO	KERN_INFO	EEEPC_LOG
 
 /*
  * Definitions for Asus EeePC
@@ -141,8 +139,10 @@
 	u16 event_count[128];		/* count for each event */
 	struct input_dev *inputdev;
 	u16 *keycode_map;
-	struct rfkill *eeepc_wlan_rfkill;
-	struct rfkill *eeepc_bluetooth_rfkill;
+	struct rfkill *wlan_rfkill;
+	struct rfkill *bluetooth_rfkill;
+	struct rfkill *wwan3g_rfkill;
+	struct hotplug_slot *hotplug_slot;
 };
 
 /* The actual device the driver binds to */
@@ -213,6 +213,15 @@
 	},
 };
 
+/* PCI hotplug ops */
+static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
+	.owner = THIS_MODULE,
+	.get_adapter_status = eeepc_get_adapter_status,
+	.get_power_status = eeepc_get_adapter_status,
+};
+
 /* The backlight device /sys/class/backlight */
 static struct backlight_device *eeepc_backlight_device;
 
@@ -274,20 +283,20 @@
 		if (method == NULL)
 			return -ENODEV;
 		if (write_acpi_int(ehotk->handle, method, value, NULL))
-			printk(EEEPC_WARNING "Error writing %s\n", method);
+			pr_warning("Error writing %s\n", method);
 	}
 	return 0;
 }
 
 static int get_acpi(int cm)
 {
-	int value = -1;
+	int value = -ENODEV;
 	if ((ehotk->cm_supported & (0x1 << cm))) {
 		const char *method = cm_getv[cm];
 		if (method == NULL)
 			return -ENODEV;
 		if (read_acpi_int(ehotk->handle, method, &value))
-			printk(EEEPC_WARNING "Error reading %s\n", method);
+			pr_warning("Error reading %s\n", method);
 	}
 	return value;
 }
@@ -359,13 +368,19 @@
 
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0)
-		set_acpi(cm, value);
+		value = set_acpi(cm, value);
+	if (value < 0)
+		return value;
 	return rv;
 }
 
 static ssize_t show_sys_acpi(int cm, char *buf)
 {
-	return sprintf(buf, "%d\n", get_acpi(cm));
+	int value = get_acpi(cm);
+
+	if (value < 0)
+		return value;
+	return sprintf(buf, "%d\n", value);
 }
 
 #define EEEPC_CREATE_DEVICE_ATTR(_name, _cm)				\
@@ -539,6 +554,28 @@
 	return -EINVAL;
 }
 
+static void cmsg_quirk(int cm, const char *name)
+{
+	int dummy;
+
+	/* Some BIOSes do not report cm although it is avaliable.
+	   Check if cm_getv[cm] works and, if yes, assume cm should be set. */
+	if (!(ehotk->cm_supported & (1 << cm))
+	    && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) {
+		pr_info("%s (%x) not reported by BIOS,"
+			" enabling anyway\n", name, 1 << cm);
+		ehotk->cm_supported |= 1 << cm;
+	}
+}
+
+static void cmsg_quirks(void)
+{
+	cmsg_quirk(CM_ASL_LID, "LID");
+	cmsg_quirk(CM_ASL_TYPE, "TYPE");
+	cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER");
+	cmsg_quirk(CM_ASL_TPD, "TPD");
+}
+
 static int eeepc_hotk_check(void)
 {
 	const struct key_entry *key;
@@ -551,26 +588,24 @@
 	if (ehotk->device->status.present) {
 		if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag,
 				    &buffer)) {
-			printk(EEEPC_ERR "Hotkey initialization failed\n");
+			pr_err("Hotkey initialization failed\n");
 			return -ENODEV;
 		} else {
-			printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n",
-			       ehotk->init_flag);
+			pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag);
 		}
 		/* get control methods supported */
 		if (read_acpi_int(ehotk->handle, "CMSG"
 				   , &ehotk->cm_supported)) {
-			printk(EEEPC_ERR
-			       "Get control methods supported failed\n");
+			pr_err("Get control methods supported failed\n");
 			return -ENODEV;
 		} else {
-			printk(EEEPC_INFO
-			       "Get control methods supported: 0x%x\n",
-			       ehotk->cm_supported);
+			cmsg_quirks();
+			pr_info("Get control methods supported: 0x%x\n",
+				ehotk->cm_supported);
 		}
 		ehotk->inputdev = input_allocate_device();
 		if (!ehotk->inputdev) {
-			printk(EEEPC_INFO "Unable to allocate input device\n");
+			pr_info("Unable to allocate input device\n");
 			return 0;
 		}
 		ehotk->inputdev->name = "Asus EeePC extra buttons";
@@ -589,12 +624,12 @@
 		}
 		result = input_register_device(ehotk->inputdev);
 		if (result) {
-			printk(EEEPC_INFO "Unable to register input device\n");
+			pr_info("Unable to register input device\n");
 			input_free_device(ehotk->inputdev);
 			return 0;
 		}
 	} else {
-		printk(EEEPC_ERR "Hotkey device not present, aborting\n");
+		pr_err("Hotkey device not present, aborting\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -612,6 +647,19 @@
 	return -1;
 }
 
+static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot,
+				    u8 *value)
+{
+	int val = get_acpi(CM_ASL_WLAN);
+
+	if (val == 1 || val == 0)
+		*value = val;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
 static void eeepc_rfkill_hotplug(void)
 {
 	struct pci_dev *dev;
@@ -619,7 +667,7 @@
 	bool blocked;
 
 	if (!bus) {
-		printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
+		pr_warning("Unable to find PCI bus 1?\n");
 		return;
 	}
 
@@ -635,7 +683,7 @@
 		if (dev) {
 			pci_bus_assign_resources(bus);
 			if (pci_bus_add_device(dev))
-				printk(EEEPC_ERR "Unable to hotplug wifi\n");
+				pr_err("Unable to hotplug wifi\n");
 		}
 	} else {
 		dev = pci_get_slot(bus, 0);
@@ -645,7 +693,7 @@
 		}
 	}
 
-	rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
+	rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
 }
 
 static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
@@ -718,8 +766,7 @@
 						     eeepc_rfkill_notify,
 						     NULL);
 		if (ACPI_FAILURE(status))
-			printk(EEEPC_WARNING
-			       "Failed to register notify on %s\n", node);
+			pr_warning("Failed to register notify on %s\n", node);
 	} else
 		return -ENODEV;
 
@@ -738,19 +785,66 @@
 						     ACPI_SYSTEM_NOTIFY,
 						     eeepc_rfkill_notify);
 		if (ACPI_FAILURE(status))
-			printk(EEEPC_ERR
-			       "Error removing rfkill notify handler %s\n",
+			pr_err("Error removing rfkill notify handler %s\n",
 				node);
 	}
 }
 
+static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot)
+{
+	kfree(hotplug_slot->info);
+	kfree(hotplug_slot);
+}
+
+static int eeepc_setup_pci_hotplug(void)
+{
+	int ret = -ENOMEM;
+	struct pci_bus *bus = pci_find_bus(0, 1);
+
+	if (!bus) {
+		pr_err("Unable to find wifi PCI bus\n");
+		return -ENODEV;
+	}
+
+	ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
+	if (!ehotk->hotplug_slot)
+		goto error_slot;
+
+	ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
+					    GFP_KERNEL);
+	if (!ehotk->hotplug_slot->info)
+		goto error_info;
+
+	ehotk->hotplug_slot->private = ehotk;
+	ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug;
+	ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops;
+	eeepc_get_adapter_status(ehotk->hotplug_slot,
+				 &ehotk->hotplug_slot->info->adapter_status);
+
+	ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi");
+	if (ret) {
+		pr_err("Unable to register hotplug slot - %d\n", ret);
+		goto error_register;
+	}
+
+	return 0;
+
+error_register:
+	kfree(ehotk->hotplug_slot->info);
+error_info:
+	kfree(ehotk->hotplug_slot);
+	ehotk->hotplug_slot = NULL;
+error_slot:
+	return ret;
+}
+
 static int eeepc_hotk_add(struct acpi_device *device)
 {
 	int result;
 
 	if (!device)
 		 return -EINVAL;
-	printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n");
+	pr_notice(EEEPC_HOTK_NAME "\n");
 	ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
 	if (!ehotk)
 		return -ENOMEM;
@@ -764,53 +858,8 @@
 	if (result)
 		goto ehotk_fail;
 
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
-	if (get_acpi(CM_ASL_WLAN) != -1) {
-		ehotk->eeepc_wlan_rfkill = rfkill_alloc("eeepc-wlan",
-							&device->dev,
-							RFKILL_TYPE_WLAN,
-							&eeepc_rfkill_ops,
-							(void *)CM_ASL_WLAN);
-
-		if (!ehotk->eeepc_wlan_rfkill)
-			goto wlan_fail;
-
-		rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
-				     get_acpi(CM_ASL_WLAN) != 1);
-		result = rfkill_register(ehotk->eeepc_wlan_rfkill);
-		if (result)
-			goto wlan_fail;
-	}
-
-	if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
-		ehotk->eeepc_bluetooth_rfkill =
-			rfkill_alloc("eeepc-bluetooth",
-				     &device->dev,
-				     RFKILL_TYPE_BLUETOOTH,
-				     &eeepc_rfkill_ops,
-				     (void *)CM_ASL_BLUETOOTH);
-
-		if (!ehotk->eeepc_bluetooth_rfkill)
-			goto bluetooth_fail;
-
-		rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
-				     get_acpi(CM_ASL_BLUETOOTH) != 1);
-		result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
-		if (result)
-			goto bluetooth_fail;
-	}
-
 	return 0;
 
- bluetooth_fail:
-	rfkill_destroy(ehotk->eeepc_bluetooth_rfkill);
-	rfkill_unregister(ehotk->eeepc_wlan_rfkill);
- wlan_fail:
-	rfkill_destroy(ehotk->eeepc_wlan_rfkill);
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
  ehotk_fail:
 	kfree(ehotk);
 	ehotk = NULL;
@@ -823,16 +872,13 @@
 	if (!device || !acpi_driver_data(device))
 		 return -EINVAL;
 
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
-	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
-
 	kfree(ehotk);
 	return 0;
 }
 
 static int eeepc_hotk_resume(struct acpi_device *device)
 {
-	if (ehotk->eeepc_wlan_rfkill) {
+	if (ehotk->wlan_rfkill) {
 		bool wlan;
 
 		/* Workaround - it seems that _PTS disables the wireless
@@ -844,14 +890,13 @@
 		wlan = get_acpi(CM_ASL_WLAN);
 		set_acpi(CM_ASL_WLAN, wlan);
 
-		rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
-				    wlan != 1);
+		rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
 
 		eeepc_rfkill_hotplug();
 	}
 
-	if (ehotk->eeepc_bluetooth_rfkill)
-		rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+	if (ehotk->bluetooth_rfkill)
+		rfkill_set_sw_state(ehotk->bluetooth_rfkill,
 				    get_acpi(CM_ASL_BLUETOOTH) != 1);
 
 	return 0;
@@ -973,10 +1018,16 @@
 
 static void eeepc_rfkill_exit(void)
 {
-	if (ehotk->eeepc_wlan_rfkill)
-		rfkill_unregister(ehotk->eeepc_wlan_rfkill);
-	if (ehotk->eeepc_bluetooth_rfkill)
-		rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
+	if (ehotk->wlan_rfkill)
+		rfkill_unregister(ehotk->wlan_rfkill);
+	if (ehotk->bluetooth_rfkill)
+		rfkill_unregister(ehotk->bluetooth_rfkill);
+	if (ehotk->wwan3g_rfkill)
+		rfkill_unregister(ehotk->wwan3g_rfkill);
+	if (ehotk->hotplug_slot)
+		pci_hp_deregister(ehotk->hotplug_slot);
 }
 
 static void eeepc_input_exit(void)
@@ -1011,6 +1062,75 @@
 	platform_driver_unregister(&platform_driver);
 }
 
+static int eeepc_new_rfkill(struct rfkill **rfkill,
+			    const char *name, struct device *dev,
+			    enum rfkill_type type, int cm)
+{
+	int result;
+
+	result = get_acpi(cm);
+	if (result < 0)
+		return result;
+
+	*rfkill = rfkill_alloc(name, dev, type,
+			       &eeepc_rfkill_ops, (void *)(unsigned long)cm);
+
+	if (!*rfkill)
+		return -EINVAL;
+
+	rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1);
+	result = rfkill_register(*rfkill);
+	if (result) {
+		rfkill_destroy(*rfkill);
+		*rfkill = NULL;
+		return result;
+	}
+	return 0;
+}
+
+
+static int eeepc_rfkill_init(struct device *dev)
+{
+	int result = 0;
+
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+	eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
+	result = eeepc_new_rfkill(&ehotk->wlan_rfkill,
+				  "eeepc-wlan", dev,
+				  RFKILL_TYPE_WLAN, CM_ASL_WLAN);
+
+	if (result && result != -ENODEV)
+		goto exit;
+
+	result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill,
+				  "eeepc-bluetooth", dev,
+				  RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH);
+
+	if (result && result != -ENODEV)
+		goto exit;
+
+	result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill,
+				  "eeepc-wwan3g", dev,
+				  RFKILL_TYPE_WWAN, CM_ASL_3G);
+
+	if (result && result != -ENODEV)
+		goto exit;
+
+	result = eeepc_setup_pci_hotplug();
+	/*
+	 * If we get -EBUSY then something else is handling the PCI hotplug -
+	 * don't fail in this case
+	 */
+	if (result == -EBUSY)
+		result = 0;
+
+exit:
+	if (result && result != -ENODEV)
+		eeepc_rfkill_exit();
+	return result;
+}
+
 static int eeepc_backlight_init(struct device *dev)
 {
 	struct backlight_device *bd;
@@ -1018,8 +1138,7 @@
 	bd = backlight_device_register(EEEPC_HOTK_FILE, dev,
 				       NULL, &eeepcbl_ops);
 	if (IS_ERR(bd)) {
-		printk(EEEPC_ERR
-		       "Could not register eeepc backlight device\n");
+		pr_err("Could not register eeepc backlight device\n");
 		eeepc_backlight_device = NULL;
 		return PTR_ERR(bd);
 	}
@@ -1038,8 +1157,7 @@
 
 	hwmon = hwmon_device_register(dev);
 	if (IS_ERR(hwmon)) {
-		printk(EEEPC_ERR
-		       "Could not register eeepc hwmon device\n");
+		pr_err("Could not register eeepc hwmon device\n");
 		eeepc_hwmon_device = NULL;
 		return PTR_ERR(hwmon);
 	}
@@ -1065,19 +1183,6 @@
 		acpi_bus_unregister_driver(&eeepc_hotk_driver);
 		return -ENODEV;
 	}
-	dev = acpi_get_physical_device(ehotk->device->handle);
-
-	if (!acpi_video_backlight_support()) {
-		result = eeepc_backlight_init(dev);
-		if (result)
-			goto fail_backlight;
-	} else
-		printk(EEEPC_INFO "Backlight controlled by ACPI video "
-		       "driver\n");
-
-	result = eeepc_hwmon_init(dev);
-	if (result)
-		goto fail_hwmon;
 
 	eeepc_enable_camera();
 
@@ -1097,7 +1202,33 @@
 				    &platform_attribute_group);
 	if (result)
 		goto fail_sysfs;
+
+	dev = &platform_device->dev;
+
+	if (!acpi_video_backlight_support()) {
+		result = eeepc_backlight_init(dev);
+		if (result)
+			goto fail_backlight;
+	} else
+		pr_info("Backlight controlled by ACPI video "
+			"driver\n");
+
+	result = eeepc_hwmon_init(dev);
+	if (result)
+		goto fail_hwmon;
+
+	result = eeepc_rfkill_init(dev);
+	if (result)
+		goto fail_rfkill;
+
 	return 0;
+fail_rfkill:
+	eeepc_hwmon_exit();
+fail_hwmon:
+	eeepc_backlight_exit();
+fail_backlight:
+	sysfs_remove_group(&platform_device->dev.kobj,
+			   &platform_attribute_group);
 fail_sysfs:
 	platform_device_del(platform_device);
 fail_platform_device2:
@@ -1105,12 +1236,7 @@
 fail_platform_device1:
 	platform_driver_unregister(&platform_driver);
 fail_platform_driver:
-	eeepc_hwmon_exit();
-fail_hwmon:
-	eeepc_backlight_exit();
-fail_backlight:
 	eeepc_input_exit();
-	eeepc_rfkill_exit();
 	return result;
 }
 
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index aafd3e6..a118eb0 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,8 +1,8 @@
 /*
  * Blackfin On-Chip Real Time Clock Driver
- *  Supports BF52[257]/BF53[123]/BF53[467]/BF54[24789]
+ *  Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -363,7 +363,7 @@
 	struct bfin_rtc *rtc;
 	struct device *dev = &pdev->dev;
 	int ret = 0;
-	unsigned long timeout;
+	unsigned long timeout = jiffies + HZ;
 
 	dev_dbg_stamp(dev);
 
@@ -374,32 +374,32 @@
 	platform_set_drvdata(pdev, rtc);
 	device_init_wakeup(dev, 1);
 
+	/* Register our RTC with the RTC framework */
+	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops,
+						THIS_MODULE);
+	if (unlikely(IS_ERR(rtc->rtc_dev))) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err;
+	}
+
 	/* Grab the IRQ and init the hardware */
 	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
 	if (unlikely(ret))
-		goto err;
+		goto err_reg;
 	/* sometimes the bootloader touched things, but the write complete was not
 	 * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
 	 */
-	timeout = jiffies + HZ;
 	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
 		if (time_after(jiffies, timeout))
 			break;
 	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
 	bfin_write_RTC_SWCNT(0);
 
-	/* Register our RTC with the RTC framework */
-	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
-	if (unlikely(IS_ERR(rtc->rtc_dev))) {
-		ret = PTR_ERR(rtc->rtc_dev);
-		goto err_irq;
-	}
-
 	return 0;
 
- err_irq:
-	free_irq(IRQ_RTC, dev);
- err:
+err_reg:
+	rtc_device_unregister(rtc->rtc_dev);
+err:
 	kfree(rtc);
 	return ret;
 }
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 8201387..ef142fd 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -210,13 +210,11 @@
 static int sg_allow_access(struct file *filp, unsigned char *cmd)
 {
 	struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
-	struct request_queue *q = sfp->parentdp->device->request_queue;
 
 	if (sfp->parentdp->device->type == TYPE_SCANNER)
 		return 0;
 
-	return blk_verify_command(&q->cmd_filter,
-				  cmd, filp->f_mode & FMODE_WRITE);
+	return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE);
 }
 
 static int
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index a07015d..6160e03 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -759,6 +759,8 @@
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
+	if (dev->device == PCI_DEVICE_ID_NETMOS_9901)
+		return 0;
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
 			dev->subsystem_device == 0x0299)
 		return 0;
@@ -3557,6 +3559,10 @@
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index aa90ddb..8980a56 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -514,6 +514,8 @@
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+
 	master->bus_num = 2;	/* "official" */
 	master->num_chipselect = 4;
 	master->setup = uwire_setup;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 2a5abc0..f1db395 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -258,6 +258,11 @@
 	struct spi_bitbang	*bitbang =
 		container_of(work, struct spi_bitbang, work);
 	unsigned long		flags;
+	int			do_setup = -1;
+	int			(*setup_transfer)(struct spi_device *,
+					struct spi_transfer *);
+
+	setup_transfer = bitbang->setup_transfer;
 
 	spin_lock_irqsave(&bitbang->lock, flags);
 	bitbang->busy = 1;
@@ -269,8 +274,6 @@
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
-		int			(*setup_transfer)(struct spi_device *,
-						struct spi_transfer *);
 
 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@@ -287,19 +290,19 @@
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
-		setup_transfer = NULL;
 
 		list_for_each_entry (t, &m->transfers, transfer_list) {
 
-			/* override or restore speed and wordsize */
-			if (t->speed_hz || t->bits_per_word) {
-				setup_transfer = bitbang->setup_transfer;
+			/* override speed or wordsize? */
+			if (t->speed_hz || t->bits_per_word)
+				do_setup = 1;
+
+			/* init (-1) or override (1) transfer params */
+			if (do_setup != 0) {
 				if (!setup_transfer) {
 					status = -ENOPROTOOPT;
 					break;
 				}
-			}
-			if (setup_transfer) {
 				status = setup_transfer(spi, t);
 				if (status < 0)
 					break;
@@ -363,9 +366,10 @@
 		m->status = status;
 		m->complete(m->context);
 
-		/* restore speed and wordsize */
-		if (setup_transfer)
+		/* restore speed and wordsize if it was overridden */
+		if (do_setup == 1)
 			setup_transfer(spi, NULL);
+		do_setup = 0;
 
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4..606e7a4 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -58,15 +58,20 @@
 
 
 /* Bit masks for spi_device.mode management.  Note that incorrect
- * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other
- * devices on a shared bus:  CS_HIGH, because this device will be
- * active when it shouldn't be;  3WIRE, because when active it won't
- * behave as it should.
+ * settings for some settings can cause *lots* of trouble for other
+ * devices on a shared bus:
  *
- * REVISIT should changing those two modes be privileged?
+ *  - CS_HIGH ... this device will be active when it shouldn't be
+ *  - 3WIRE ... when active, it won't behave as it should
+ *  - NO_CS ... there will be no explicit message boundaries; this
+ *	is completely incompatible with the shared bus model
+ *  - READY ... transfers may proceed when they shouldn't.
+ *
+ * REVISIT should changing those flags be privileged?
  */
 #define SPI_MODE_MASK		(SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
-				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
+				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
+				| SPI_NO_CS | SPI_READY)
 
 struct spidev_data {
 	dev_t			devt;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 38bfdb0..3f10459 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -550,7 +550,7 @@
 static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm;
-	int rv = -EINVAL;
+	int rv = -ENODEV;
 	int i;
 	dbg("Entering acm_tty_open.");
 
@@ -677,7 +677,7 @@
 
 	/* Perform the closing process and see if we need to do the hardware
 	   shutdown */
-	if (tty_port_close_start(&acm->port, tty, filp) == 0)
+	if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
 		return;
 	acm_port_down(acm, 0);
 	tty_port_close_end(&acm->port, tty);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d595aa5..a842164 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -333,6 +333,9 @@
 {
 	struct usb_serial_port *port = tty->driver_data;
 
+	if (!port)
+		return;
+
 	dbg("%s - port %d", __func__, port->number);
 
 
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 018850c..497ff8a 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2414,7 +2414,10 @@
 	if (err)
 		return err;
 	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-	return fbhw->encode_fix(fix, &par);
+	mutex_lock(&info->mm_lock);
+	err = fbhw->encode_fix(fix, &par);
+	mutex_unlock(&info->mm_lock);
+	return err;
 }
 
 static int atafb_get_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -2743,7 +2746,9 @@
 
 	/* Decode wanted screen parameters */
 	fbhw->decode_var(&info->var, par);
+	mutex_lock(&info->mm_lock);
 	fbhw->encode_fix(&info->fix, par);
+	mutex_unlock(&info->mm_lock);
 
 	/* Set new videomode */
 	ata_set_par(par);
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5afd644..cb88394 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -270,7 +270,9 @@
 
 	smem_len = (var->xres_virtual * var->yres_virtual
 		    * ((var->bits_per_pixel + 7) / 8));
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_len = max(smem_len, sinfo->smem_len);
+	mutex_unlock(&info->mm_lock);
 
 	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 7691e73..1f39a62 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -187,6 +187,8 @@
 	int mtrr_reg;
 #endif
 	u32 mem_cntl;
+	struct crtc saved_crtc;
+	union aty_pll saved_pll;
 };
 
     /*
@@ -217,6 +219,7 @@
 #define M64F_XL_DLL		0x00080000
 #define M64F_MFB_FORCE_4	0x00100000
 #define M64F_HW_TRIPLE		0x00200000
+#define M64F_XL_MEM		0x00400000
     /*
      *  Register access
      */
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 1207c20..63d3739 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -66,6 +66,8 @@
 #include <linux/spinlock.h>
 #include <linux/wait.h>
 #include <linux/backlight.h>
+#include <linux/reboot.h>
+#include <linux/dmi.h>
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
@@ -249,8 +251,6 @@
 static int store_video_par(char *videopar, unsigned char m64_num);
 #endif
 
-static struct crtc saved_crtc;
-static union aty_pll saved_pll;
 static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
 
 static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
@@ -261,6 +261,8 @@
 static int read_aty_sense(const struct atyfb_par *par);
 #endif
 
+static DEFINE_MUTEX(reboot_lock);
+static struct fb_info *reboot_info;
 
     /*
      *  Interface used by the world
@@ -361,8 +363,8 @@
 #define ATI_CHIP_264GTPRO  (ATI_MODERN_SET | M64F_SDRAM_MAGIC_PLL | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
 #define ATI_CHIP_264LTPRO  (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D)
 
-#define ATI_CHIP_264XL     (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4)
-#define ATI_CHIP_MOBILITY  (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_MOBIL_BUS)
+#define ATI_CHIP_264XL     (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM)
+#define ATI_CHIP_MOBILITY  (ATI_MODERN_SET | M64F_HW_TRIPLE | M64F_FIFO_32 | M64F_RESET_3D | M64F_XL_DLL | M64F_MFB_FORCE_4 | M64F_XL_MEM | M64F_MOBIL_BUS)
 
 static struct {
 	u16 pci_id;
@@ -539,6 +541,7 @@
 static char ram_sdram[] __devinitdata = "SDRAM (1:1)";
 static char ram_sgram[] __devinitdata = "SGRAM (1:1)";
 static char ram_sdram32[] __devinitdata = "SDRAM (2:1) (32-bit)";
+static char ram_wram[] __devinitdata = "WRAM";
 static char ram_off[] __devinitdata = "OFF";
 #endif /* CONFIG_FB_ATY_CT */
 
@@ -553,6 +556,10 @@
 #ifdef CONFIG_FB_ATY_CT
 static char *aty_ct_ram[8] __devinitdata = {
 	ram_off, ram_dram, ram_edo, ram_edo,
+	ram_sdram, ram_sgram, ram_wram, ram_resv
+};
+static char *aty_xl_ram[8] __devinitdata = {
+	ram_off, ram_dram, ram_edo, ram_edo,
 	ram_sdram, ram_sgram, ram_sdram32, ram_resv
 };
 #endif /* CONFIG_FB_ATY_CT */
@@ -760,6 +767,17 @@
 #endif /* CONFIG_FB_ATY_GENERIC_LCD */
 }
 
+static u32 calc_line_length(struct atyfb_par *par, u32 vxres, u32 bpp)
+{
+	u32 line_length = vxres * bpp / 8;
+
+	if (par->ram_type == SGRAM ||
+	    (!M64_HAS(XL_MEM) && par->ram_type == WRAM))
+		line_length = (line_length + 63) & ~63;
+
+	return line_length;
+}
+
 static int aty_var_to_crtc(const struct fb_info *info,
 	const struct fb_var_screeninfo *var, struct crtc *crtc)
 {
@@ -769,13 +787,14 @@
 	u32 h_total, h_disp, h_sync_strt, h_sync_end, h_sync_dly, h_sync_wid, h_sync_pol;
 	u32 v_total, v_disp, v_sync_strt, v_sync_end, v_sync_wid, v_sync_pol, c_sync;
 	u32 pix_width, dp_pix_width, dp_chain_mask;
+	u32 line_length;
 
 	/* input */
-	xres = var->xres;
+	xres = (var->xres + 7) & ~7;
 	yres = var->yres;
-	vxres = var->xres_virtual;
+	vxres = (var->xres_virtual + 7) & ~7;
 	vyres = var->yres_virtual;
-	xoffset = var->xoffset;
+	xoffset = (var->xoffset + 7) & ~7;
 	yoffset = var->yoffset;
 	bpp = var->bits_per_pixel;
 	if (bpp == 16)
@@ -827,7 +846,9 @@
 	} else
 		FAIL("invalid bpp");
 
-	if (vxres * vyres * bpp / 8 > info->fix.smem_len)
+	line_length = calc_line_length(par, vxres, bpp);
+
+	if (vyres * line_length > info->fix.smem_len)
 		FAIL("not enough video RAM");
 
 	h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
@@ -969,7 +990,9 @@
 	crtc->xoffset = xoffset;
 	crtc->yoffset = yoffset;
 	crtc->bpp = bpp;
-	crtc->off_pitch = ((yoffset*vxres+xoffset)*bpp/64) | (vxres<<19);
+	crtc->off_pitch =
+		((yoffset * line_length + xoffset * bpp / 8) / 8) |
+		((line_length / bpp) << 22);
 	crtc->vline_crnt_vline = 0;
 
 	crtc->h_tot_disp = h_total | (h_disp<<16);
@@ -1394,7 +1417,9 @@
 	}
 	aty_st_8(DAC_MASK, 0xff, par);
 
-	info->fix.line_length = var->xres_virtual * var->bits_per_pixel/8;
+	info->fix.line_length = calc_line_length(par, var->xres_virtual,
+						 var->bits_per_pixel);
+
 	info->fix.visual = var->bits_per_pixel <= 8 ?
 		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
 
@@ -1505,10 +1530,12 @@
 {
 	u32 xoffset = info->var.xoffset;
 	u32 yoffset = info->var.yoffset;
-	u32 vxres = par->crtc.vxres;
+	u32 line_length = info->fix.line_length;
 	u32 bpp = info->var.bits_per_pixel;
 
-	par->crtc.off_pitch = ((yoffset * vxres + xoffset) * bpp / 64) | (vxres << 19);
+	par->crtc.off_pitch =
+		((yoffset * line_length + xoffset * bpp / 8) / 8) |
+		((line_length / bpp) << 22);
 }
 
 
@@ -2201,7 +2228,7 @@
 	const int *refresh_tbl;
 	int i, size;
 
-	if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) {
+	if (M64_HAS(XL_MEM)) {
 		refresh_tbl = ragexl_tbl;
 		size = ARRAY_SIZE(ragexl_tbl);
 	} else {
@@ -2335,7 +2362,10 @@
 		par->pll_ops = &aty_pll_ct;
 		par->bus_type = PCI;
 		par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
-		ramname = aty_ct_ram[par->ram_type];
+		if (M64_HAS(XL_MEM))
+			ramname = aty_xl_ram[par->ram_type];
+		else
+			ramname = aty_ct_ram[par->ram_type];
 		/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
 		if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
 			par->pll_limits.mclk = 63;
@@ -2390,9 +2420,9 @@
 #endif /* CONFIG_FB_ATY_CT */
 
 	/* save previous video mode */
-	aty_get_crtc(par, &saved_crtc);
+	aty_get_crtc(par, &par->saved_crtc);
 	if(par->pll_ops->get_pll)
-		par->pll_ops->get_pll(info, &saved_pll);
+		par->pll_ops->get_pll(info, &par->saved_pll);
 
 	par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
 	gtb_memsize = M64_HAS(GTB_DSP);
@@ -2667,8 +2697,8 @@
 
 aty_init_exit:
 	/* restore video mode */
-	aty_set_crtc(par, &saved_crtc);
-	par->pll_ops->set_pll(info, &saved_pll);
+	aty_set_crtc(par, &par->saved_crtc);
+	par->pll_ops->set_pll(info, &par->saved_pll);
 
 #ifdef CONFIG_MTRR
 	if (par->mtrr_reg >= 0) {
@@ -3502,6 +3532,11 @@
 	par->mmap_map[1].prot_flag = _PAGE_E;
 #endif /* __sparc__ */
 
+	mutex_lock(&reboot_lock);
+	if (!reboot_info)
+		reboot_info = info;
+	mutex_unlock(&reboot_lock);
+
 	return 0;
 
 err_release_io:
@@ -3614,8 +3649,8 @@
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 
 	/* restore video mode */
-	aty_set_crtc(par, &saved_crtc);
-	par->pll_ops->set_pll(info, &saved_pll);
+	aty_set_crtc(par, &par->saved_crtc);
+	par->pll_ops->set_pll(info, &par->saved_pll);
 
 	unregister_framebuffer(info);
 
@@ -3661,6 +3696,11 @@
 {
 	struct fb_info *info = pci_get_drvdata(pdev);
 
+	mutex_lock(&reboot_lock);
+	if (reboot_info == info)
+		reboot_info = NULL;
+	mutex_unlock(&reboot_lock);
+
 	atyfb_remove(info);
 }
 
@@ -3808,6 +3848,56 @@
 }
 #endif  /*  MODULE  */
 
+static int atyfb_reboot_notify(struct notifier_block *nb,
+			       unsigned long code, void *unused)
+{
+	struct atyfb_par *par;
+
+	if (code != SYS_RESTART)
+		return NOTIFY_DONE;
+
+	mutex_lock(&reboot_lock);
+
+	if (!reboot_info)
+		goto out;
+
+	if (!lock_fb_info(reboot_info))
+		goto out;
+
+	par = reboot_info->par;
+
+	/*
+	 * HP OmniBook 500's BIOS doesn't like the state of the
+	 * hardware after atyfb has been used. Restore the hardware
+	 * to the original state to allow successful reboots.
+	 */
+	aty_set_crtc(par, &par->saved_crtc);
+	par->pll_ops->set_pll(reboot_info, &par->saved_pll);
+
+	unlock_fb_info(reboot_info);
+ out:
+	mutex_unlock(&reboot_lock);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block atyfb_reboot_notifier = {
+	.notifier_call = atyfb_reboot_notify,
+};
+
+static const struct dmi_system_id atyfb_reboot_ids[] = {
+	{
+		.ident = "HP OmniBook 500",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP OmniBook PC"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "HP OmniBook 500 FA"),
+		},
+	},
+
+	{ }
+};
+
 static int __init atyfb_init(void)
 {
     int err1 = 1, err2 = 1;
@@ -3826,11 +3916,20 @@
     err2 = atyfb_atari_probe();
 #endif
 
-    return (err1 && err2) ? -ENODEV : 0;
+    if (err1 && err2)
+	return -ENODEV;
+
+    if (dmi_check_system(atyfb_reboot_ids))
+	register_reboot_notifier(&atyfb_reboot_notifier);
+
+    return 0;
 }
 
 static void __exit atyfb_exit(void)
 {
+	if (dmi_check_system(atyfb_reboot_ids))
+		unregister_reboot_notifier(&atyfb_reboot_notifier);
+
 #ifdef CONFIG_PCI
 	pci_unregister_driver(&atyfb_driver);
 #endif
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/aty/mach64_accel.c
index 0cc9724..51fcc0a 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/aty/mach64_accel.c
@@ -63,14 +63,17 @@
 void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
 {
 	u32 pitch_value;
+	u32 vxres;
 
 	/* determine modal information from global mode structure */
-	pitch_value = info->var.xres_virtual;
+	pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
+	vxres = info->var.xres_virtual;
 
 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
 		/* horizontal coordinates and widths must be adjusted */
 		pitch_value *= 3;
+		vxres *= 3;
 	}
 
 	/* On GTC (RagePro), we need to reset the 3D engine before */
@@ -133,7 +136,7 @@
 	aty_st_le32(SC_LEFT, 0, par);
 	aty_st_le32(SC_TOP, 0, par);
 	aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
-	aty_st_le32(SC_RIGHT, pitch_value - 1, par);
+	aty_st_le32(SC_RIGHT, vxres - 1, par);
 
 	/* set background color to minimum value (usually BLACK) */
 	aty_st_le32(DP_BKGD_CLR, 0, par);
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 1dae7f8..51422fc 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -356,7 +356,7 @@
 	lcd->power = FB_BLANK_POWERDOWN;
 	lcd->mode = MODE_VGA;	/* default to VGA */
 
-	lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
+	lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, GFP_KERNEL);
 	if (lcd->buf == NULL) {
 		kfree(lcd);
 		return -ENOMEM;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index f8a09bf..53ea056 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1310,8 +1310,6 @@
 
 static int
 fb_mmap(struct file *file, struct vm_area_struct * vma)
-__acquires(&info->lock)
-__releases(&info->lock)
 {
 	int fbidx = iminor(file->f_path.dentry->d_inode);
 	struct fb_info *info = registered_fb[fbidx];
@@ -1325,16 +1323,14 @@
 	off = vma->vm_pgoff << PAGE_SHIFT;
 	if (!fb)
 		return -ENODEV;
+	mutex_lock(&info->mm_lock);
 	if (fb->fb_mmap) {
 		int res;
-		mutex_lock(&info->lock);
 		res = fb->fb_mmap(info, vma);
-		mutex_unlock(&info->lock);
+		mutex_unlock(&info->mm_lock);
 		return res;
 	}
 
-	mutex_lock(&info->lock);
-
 	/* frame buffer memory */
 	start = info->fix.smem_start;
 	len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
@@ -1342,13 +1338,13 @@
 		/* memory mapped io */
 		off -= len;
 		if (info->var.accel_flags) {
-			mutex_unlock(&info->lock);
+			mutex_unlock(&info->mm_lock);
 			return -EINVAL;
 		}
 		start = info->fix.mmio_start;
 		len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
 	}
-	mutex_unlock(&info->lock);
+	mutex_unlock(&info->mm_lock);
 	start &= PAGE_MASK;
 	if ((vma->vm_end - vma->vm_start + off) > len)
 		return -EINVAL;
@@ -1518,6 +1514,7 @@
 			break;
 	fb_info->node = i;
 	mutex_init(&fb_info->lock);
+	mutex_init(&fb_info->mm_lock);
 
 	fb_info->dev = device_create(fb_class, fb_info->device,
 				     MKDEV(FB_MAJOR, i), NULL, "fb%d", i);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index f153c58..0bf2190 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -750,24 +750,26 @@
 static int map_video_memory(struct fb_info *info)
 {
 	phys_addr_t phys;
+	u32 smem_len = info->fix.line_length * info->var.yres_virtual;
 
 	pr_debug("info->var.xres_virtual = %d\n", info->var.xres_virtual);
 	pr_debug("info->var.yres_virtual = %d\n", info->var.yres_virtual);
 	pr_debug("info->fix.line_length  = %d\n", info->fix.line_length);
+	pr_debug("MAP_VIDEO_MEMORY: smem_len = %u\n", smem_len);
 
-	info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
-	pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
-	info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
+	info->screen_base = fsl_diu_alloc(smem_len, &phys);
 	if (info->screen_base == NULL) {
 		printk(KERN_ERR "Unable to allocate fb memory\n");
 		return -ENOMEM;
 	}
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_start = (unsigned long) phys;
+	info->fix.smem_len = smem_len;
+	mutex_unlock(&info->mm_lock);
 	info->screen_size = info->fix.smem_len;
 
 	pr_debug("Allocated fb @ paddr=0x%08lx, size=%d.\n",
-				info->fix.smem_start,
-		info->fix.smem_len);
+		 info->fix.smem_start, info->fix.smem_len);
 	pr_debug("screen base %p\n", info->screen_base);
 
 	return 0;
@@ -776,9 +778,11 @@
 static void unmap_video_memory(struct fb_info *info)
 {
 	fsl_diu_free(info->screen_base, info->fix.smem_len);
+	mutex_lock(&info->mm_lock);
 	info->screen_base = NULL;
 	info->fix.smem_start = 0;
 	info->fix.smem_len = 0;
+	mutex_unlock(&info->mm_lock);
 }
 
 /*
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 2e94019..7196067 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1090,8 +1090,10 @@
     	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
 
     	strcpy(fix->id, "I810");
+	mutex_lock(&info->mm_lock);
     	fix->smem_start = par->fb.physical;
     	fix->smem_len = par->fb.size;
+	mutex_unlock(&info->mm_lock);
     	fix->type = FB_TYPE_PACKED_PIXELS;
     	fix->type_aux = 0;
 	fix->xpanstep = 8;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 8e7a275..59c3a2e 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -724,8 +724,10 @@
 	struct fb_fix_screeninfo *fix = &ACCESS_FBINFO(fbcon).fix;
 	DBG(__func__)
 
+	mutex_lock(&ACCESS_FBINFO(fbcon).mm_lock);
 	fix->smem_start = ACCESS_FBINFO(video.base) + ACCESS_FBINFO(curr.ydstorg.bytes);
 	fix->smem_len = ACCESS_FBINFO(video.len_usable) - ACCESS_FBINFO(curr.ydstorg.bytes);
+	mutex_unlock(&ACCESS_FBINFO(fbcon).mm_lock);
 }
 
 static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -2081,6 +2083,7 @@
 	spin_lock_init(&ACCESS_FBINFO(lock.accel));
 	init_rwsem(&ACCESS_FBINFO(crtc2.lock));
 	init_rwsem(&ACCESS_FBINFO(altout.lock));
+	mutex_init(&ACCESS_FBINFO(fbcon).mm_lock);
 	ACCESS_FBINFO(irq_flags) = 0;
 	init_waitqueue_head(&ACCESS_FBINFO(crtc1.vsync.wait));
 	init_waitqueue_head(&ACCESS_FBINFO(crtc2.vsync.wait));
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index 7ac4c5f..909e10a 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -289,13 +289,16 @@
 #undef m2info
 }
 
-static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info) {
+static void matroxfb_dh_init_fix(struct matroxfb_dh_fb_info *m2info)
+{
 	struct fb_fix_screeninfo *fix = &m2info->fbcon.fix;
 
 	strcpy(fix->id, "MATROX DH");
 
+	mutex_lock(&m2info->fbcon.mm_lock);
 	fix->smem_start = m2info->video.base;
 	fix->smem_len = m2info->video.len_usable;
+	mutex_unlock(&m2info->fbcon.mm_lock);
 	fix->ypanstep = 1;
 	fix->ywrapstep = 0;
 	fix->xpanstep = 8;	/* TBD */
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index b7af525..567fb94 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -669,7 +669,7 @@
 }
 
 static int mx3fb_blank(int blank, struct fb_info *fbi);
-static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len);
 static int mx3fb_unmap_video_memory(struct fb_info *fbi);
 
 /**
@@ -742,8 +742,7 @@
 		if (fbi->fix.smem_start)
 			mx3fb_unmap_video_memory(fbi);
 
-		fbi->fix.smem_len = mem_len;
-		if (mx3fb_map_video_memory(fbi) < 0) {
+		if (mx3fb_map_video_memory(fbi, mem_len) < 0) {
 			mutex_unlock(&mx3_fbi->mutex);
 			return -ENOMEM;
 		}
@@ -1198,6 +1197,7 @@
 /**
  * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
  * @fbi:	framebuffer information pointer
+ * @mem_len:	length of mapped memory
  * @return:	Error code indicating success or failure
  *
  * This buffer is remapped into a non-cached, non-buffered, memory region to
@@ -1205,23 +1205,26 @@
  * area is remapped, all virtual memory access to the video memory should occur
  * at the new region.
  */
-static int mx3fb_map_video_memory(struct fb_info *fbi)
+static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len)
 {
 	int retval = 0;
 	dma_addr_t addr;
 
 	fbi->screen_base = dma_alloc_writecombine(fbi->device,
-						  fbi->fix.smem_len,
+						  mem_len,
 						  &addr, GFP_DMA);
 
 	if (!fbi->screen_base) {
 		dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
-			fbi->fix.smem_len);
+			mem_len);
 		retval = -EBUSY;
 		goto err0;
 	}
 
+	mutex_lock(&fbi->mm_lock);
 	fbi->fix.smem_start = addr;
+	fbi->fix.smem_len = mem_len;
+	mutex_unlock(&fbi->mm_lock);
 
 	dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
 		(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
@@ -1251,8 +1254,10 @@
 			      fbi->screen_base, fbi->fix.smem_start);
 
 	fbi->screen_base = 0;
+	mutex_lock(&fbi->mm_lock);
 	fbi->fix.smem_start = 0;
 	fbi->fix.smem_len = 0;
+	mutex_unlock(&fbi->mm_lock);
 	return 0;
 }
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 060d72f..4ea99bf 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -393,8 +393,10 @@
 
 	rg = &plane->fbdev->mem_desc.region[plane->idx];
 	fbi->screen_base	= rg->vaddr;
+	mutex_lock(&fbi->mm_lock);
 	fix->smem_start		= rg->paddr;
 	fix->smem_len		= rg->size;
+	mutex_unlock(&fbi->mm_lock);
 
 	fix->type = FB_TYPE_PACKED_PIXELS;
 	bpp = var->bits_per_pixel;
@@ -886,8 +888,10 @@
 				 * plane memory is dealloce'd, the other
 				 * screen parameters in var / fix are invalid.
 				 */
+				mutex_lock(&fbi->mm_lock);
 				fbi->fix.smem_start = 0;
 				fbi->fix.smem_len = 0;
+				mutex_unlock(&fbi->mm_lock);
 			}
 		}
 	}
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 03b3670..bacfabd 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -141,7 +141,9 @@
   		offset = 0x10;
 
 	info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
+	mutex_unlock(&info->mm_lock);
 	info->fix.visual = (pinfo->cmode == CMODE_8) ?
 		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
  	info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 0889d50..6506117 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -815,8 +815,10 @@
 	ofb->video_mem_phys = virt_to_phys(ofb->video_mem);
 	ofb->video_mem_size = size;
 
+	mutex_lock(&ofb->fb.mm_lock);
 	ofb->fb.fix.smem_start	= ofb->video_mem_phys;
 	ofb->fb.fix.smem_len	= ofb->fb.fix.line_length * var->yres_virtual;
+	mutex_unlock(&ofb->fb.mm_lock);
 	ofb->fb.screen_base	= ofb->video_mem;
 	return 0;
 }
diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c
index 653bdfe..9f6d6e6 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/sh7760fb.c
@@ -120,18 +120,6 @@
 	return 0;
 }
 
-static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info,
-		       unsigned long stride)
-{
-	memset(fix, 0, sizeof(struct fb_fix_screeninfo));
-	strcpy(fix->id, "sh7760-lcdc");
-
-	fix->smem_start = (unsigned long)info->screen_base;
-	fix->smem_len = info->screen_size;
-
-	fix->line_length = stride;
-}
-
 static int sh7760fb_get_color_info(struct device *dev,
 				   u16 lddfr, int *bpp, int *gray)
 {
@@ -334,7 +322,8 @@
 
 	iowrite32(ldsarl, par->base + LDSARL);	/* mem for lower half of DSTN */
 
-	encode_fix(&info->fix, info, stride);
+	info->fix.line_length = stride;
+
 	sh7760fb_check_var(&info->var, info);
 
 	sh7760fb_blank(FB_BLANK_UNBLANK, info);	/* panel on! */
@@ -435,6 +424,8 @@
 
 	info->screen_base = fbmem;
 	info->screen_size = vram;
+	info->fix.smem_start = (unsigned long)info->screen_base;
+	info->fix.smem_len = info->screen_size;
 
 	return 0;
 }
@@ -520,6 +511,8 @@
 	info->var.transp.length = 0;
 	info->var.transp.msb_right = 0;
 
+	strcpy(info->fix.id, "sh7760-lcdc");
+
 	/* set the DON2 bit now, before cmap allocation, as it will randomize
 	 * palette memory.
 	 */
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7072d19..fd33455 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1847,8 +1847,10 @@
 
 	strcpy(fix->id, ivideo->myid);
 
+	mutex_lock(&info->mm_lock);
 	fix->smem_start  = ivideo->video_base + ivideo->video_offset;
 	fix->smem_len    = ivideo->sisfb_mem;
+	mutex_unlock(&info->mm_lock);
 	fix->type        = FB_TYPE_PACKED_PIXELS;
 	fix->type_aux    = 0;
 	fix->visual      = (ivideo->video_bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index eb5d73a..98f24f0 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -145,7 +145,7 @@
 #define SM501_MEMF_ACCEL		(8)
 
 static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
-			   unsigned int why, size_t size)
+			   unsigned int why, size_t size, u32 smem_len)
 {
 	struct sm501fb_par *par;
 	struct fb_info *fbi;
@@ -172,7 +172,7 @@
 		if (ptr > 0)
 			ptr &= ~(PAGE_SIZE - 1);
 
-		if (fbi && ptr < fbi->fix.smem_len)
+		if (fbi && ptr < smem_len)
 			return -ENOMEM;
 
 		break;
@@ -197,7 +197,7 @@
 
 	case SM501_MEMF_ACCEL:
 		fbi = inf->fb[HEAD_CRT];
-		ptr = fbi ? fbi->fix.smem_len : 0;
+		ptr = fbi ? smem_len : 0;
 
 		fbi = inf->fb[HEAD_PANEL];
 		if (fbi) {
@@ -413,6 +413,7 @@
 	unsigned int mem_type;
 	unsigned int clock_type;
 	unsigned int head_addr;
+	unsigned int smem_len;
 
 	dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
 		__func__, var->xres, var->yres, var->bits_per_pixel,
@@ -453,18 +454,20 @@
 
 	/* allocate fb memory within 501 */
 	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
-	info->fix.smem_len    = info->fix.line_length * var->yres_virtual;
+	smem_len = info->fix.line_length * var->yres_virtual;
 
 	dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
 		info->fix.line_length);
 
-	if (sm501_alloc_mem(fbi, &par->screen, mem_type,
-			    info->fix.smem_len)) {
+	if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) {
 		dev_err(fbi->dev, "no memory available\n");
 		return -ENOMEM;
 	}
 
+	mutex_lock(&info->mm_lock);
 	info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
+	info->fix.smem_len   = smem_len;
+	mutex_unlock(&info->mm_lock);
 
 	info->screen_base = fbi->fbmem + par->screen.sm_addr;
 	info->screen_size = info->fix.smem_len;
@@ -637,7 +640,8 @@
 	if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
 		/* the head is displaying panel data... */
 
-		sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
+		sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0,
+				info->fix.smem_len);
 		goto out_update;
 	}
 
@@ -1289,7 +1293,8 @@
 
 	par->cursor_regs = info->regs + reg_base;
 
-	ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
+	ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024,
+			      fbi->fix.smem_len);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index d0674f1..8a141c2 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -523,6 +523,7 @@
 		info->fix.ywrapstep = 0;
 		info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
 
+		mutex_lock(&info->mm_lock);
 		if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
 			par->extmem_active = 1;
 			info->fix.smem_len = par->mach->mem->size+1;
@@ -530,6 +531,7 @@
 			par->extmem_active = 0;
 			info->fix.smem_len = MEM_INT_SIZE+1;
 		}
+		mutex_unlock(&info->mm_lock);
 
 		w100fb_activate_var(par);
 	}
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index a4fe7a3..3bde56b 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -218,16 +218,14 @@
  */
 static int wdrtas_get_temperature(void)
 {
-	long result;
+	int result;
 	int temperature = 0;
 
-	result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
-			   (void *)__pa(&temperature),
-			   WDRTAS_THERMAL_SENSOR, 0);
+	result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
 
 	if (result < 0)
 		printk(KERN_WARNING "wdrtas: reading the thermal sensor "
-		       "faild: %li\n", result);
+		       "failed: %i\n", result);
 	else
 		temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
 
diff --git a/fs/afs/flock.c b/fs/afs/flock.c
index 210acaf..3ff8bdd 100644
--- a/fs/afs/flock.c
+++ b/fs/afs/flock.c
@@ -432,7 +432,6 @@
 	list_del_init(&fl->fl_u.afs.link);
 	if (list_empty(&vnode->granted_locks))
 		afs_defer_unlock(vnode, key);
-	spin_unlock(&vnode->lock);
 	goto abort_attempt;
 }
 
diff --git a/fs/aio.c b/fs/aio.c
index 76da125..d065b2c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -485,6 +485,8 @@
 {
 	assert_spin_locked(&ctx->ctx_lock);
 
+	if (req->ki_eventfd != NULL)
+		eventfd_ctx_put(req->ki_eventfd);
 	if (req->ki_dtor)
 		req->ki_dtor(req);
 	if (req->ki_iovec != &req->ki_inline_vec)
@@ -509,8 +511,6 @@
 		/* Complete the fput(s) */
 		if (req->ki_filp != NULL)
 			__fput(req->ki_filp);
-		if (req->ki_eventfd != NULL)
-			__fput(req->ki_eventfd);
 
 		/* Link the iocb into the context's free list */
 		spin_lock_irq(&ctx->ctx_lock);
@@ -528,8 +528,6 @@
  */
 static int __aio_put_req(struct kioctx *ctx, struct kiocb *req)
 {
-	int schedule_putreq = 0;
-
 	dprintk(KERN_DEBUG "aio_put(%p): f_count=%ld\n",
 		req, atomic_long_read(&req->ki_filp->f_count));
 
@@ -549,24 +547,16 @@
 	 * we would not be holding the last reference to the file*, so
 	 * this function will be executed w/out any aio kthread wakeup.
 	 */
-	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count)))
-		schedule_putreq++;
-	else
-		req->ki_filp = NULL;
-	if (req->ki_eventfd != NULL) {
-		if (unlikely(atomic_long_dec_and_test(&req->ki_eventfd->f_count)))
-			schedule_putreq++;
-		else
-			req->ki_eventfd = NULL;
-	}
-	if (unlikely(schedule_putreq)) {
+	if (unlikely(atomic_long_dec_and_test(&req->ki_filp->f_count))) {
 		get_ioctx(ctx);
 		spin_lock(&fput_lock);
 		list_add(&req->ki_list, &fput_head);
 		spin_unlock(&fput_lock);
 		queue_work(aio_wq, &fput_work);
-	} else
+	} else {
+		req->ki_filp = NULL;
 		really_put_req(ctx, req);
+	}
 	return 1;
 }
 
@@ -1622,7 +1612,7 @@
 		 * an eventfd() fd, and will be signaled for each completed
 		 * event using the eventfd_signal() function.
 		 */
-		req->ki_eventfd = eventfd_fget((int) iocb->aio_resfd);
+		req->ki_eventfd = eventfd_ctx_fdget((int) iocb->aio_resfd);
 		if (IS_ERR(req->ki_eventfd)) {
 			ret = PTR_ERR(req->ki_eventfd);
 			req->ki_eventfd = NULL;
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 9fa212b..b7c1603 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1522,11 +1522,11 @@
 	info->thread = NULL;
 
 	psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
-	fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
-
 	if (psinfo == NULL)
 		return 0;
 
+	fill_note(&info->psinfo, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
+
 	/*
 	 * Figure out how many notes we're going to need for each thread.
 	 */
@@ -1929,7 +1929,10 @@
 	elf = kmalloc(sizeof(*elf), GFP_KERNEL);
 	if (!elf)
 		goto out;
-	
+	/*
+	 * The number of segs are recored into ELF header as 16bit value.
+	 * Please check DEFAULT_MAX_MAP_COUNT definition when you modify here.
+	 */
 	segs = current->mm->map_count;
 #ifdef ELF_CORE_EXTRA_PHDRS
 	segs += ELF_CORE_EXTRA_PHDRS;
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 31c46a2..49a34e7 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -1,7 +1,7 @@
 /*
  * bio-integrity.c - bio data integrity extensions
  *
- * Copyright (C) 2007, 2008 Oracle Corporation
+ * Copyright (C) 2007, 2008, 2009 Oracle Corporation
  * Written by: Martin K. Petersen <martin.petersen@oracle.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -25,11 +25,94 @@
 #include <linux/bio.h>
 #include <linux/workqueue.h>
 
-static struct kmem_cache *bio_integrity_slab __read_mostly;
-static mempool_t *bio_integrity_pool;
-static struct bio_set *integrity_bio_set;
+struct integrity_slab {
+	struct kmem_cache *slab;
+	unsigned short nr_vecs;
+	char name[8];
+};
+
+#define IS(x) { .nr_vecs = x, .name = "bip-"__stringify(x) }
+struct integrity_slab bip_slab[BIOVEC_NR_POOLS] __read_mostly = {
+	IS(1), IS(4), IS(16), IS(64), IS(128), IS(BIO_MAX_PAGES),
+};
+#undef IS
+
 static struct workqueue_struct *kintegrityd_wq;
 
+static inline unsigned int vecs_to_idx(unsigned int nr)
+{
+	switch (nr) {
+	case 1:
+		return 0;
+	case 2 ... 4:
+		return 1;
+	case 5 ... 16:
+		return 2;
+	case 17 ... 64:
+		return 3;
+	case 65 ... 128:
+		return 4;
+	case 129 ... BIO_MAX_PAGES:
+		return 5;
+	default:
+		BUG();
+	}
+}
+
+static inline int use_bip_pool(unsigned int idx)
+{
+	if (idx == BIOVEC_NR_POOLS)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * bio_integrity_alloc_bioset - Allocate integrity payload and attach it to bio
+ * @bio:	bio to attach integrity metadata to
+ * @gfp_mask:	Memory allocation mask
+ * @nr_vecs:	Number of integrity metadata scatter-gather elements
+ * @bs:		bio_set to allocate from
+ *
+ * Description: This function prepares a bio for attaching integrity
+ * metadata.  nr_vecs specifies the maximum number of pages containing
+ * integrity metadata that can be attached.
+ */
+struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *bio,
+							 gfp_t gfp_mask,
+							 unsigned int nr_vecs,
+							 struct bio_set *bs)
+{
+	struct bio_integrity_payload *bip;
+	unsigned int idx = vecs_to_idx(nr_vecs);
+
+	BUG_ON(bio == NULL);
+	bip = NULL;
+
+	/* Lower order allocations come straight from slab */
+	if (!use_bip_pool(idx))
+		bip = kmem_cache_alloc(bip_slab[idx].slab, gfp_mask);
+
+	/* Use mempool if lower order alloc failed or max vecs were requested */
+	if (bip == NULL) {
+		bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
+
+		if (unlikely(bip == NULL)) {
+			printk(KERN_ERR "%s: could not alloc bip\n", __func__);
+			return NULL;
+		}
+	}
+
+	memset(bip, 0, sizeof(*bip));
+
+	bip->bip_slab = idx;
+	bip->bip_bio = bio;
+	bio->bi_integrity = bip;
+
+	return bip;
+}
+EXPORT_SYMBOL(bio_integrity_alloc_bioset);
+
 /**
  * bio_integrity_alloc - Allocate integrity payload and attach it to bio
  * @bio:	bio to attach integrity metadata to
@@ -44,44 +127,19 @@
 						  gfp_t gfp_mask,
 						  unsigned int nr_vecs)
 {
-	struct bio_integrity_payload *bip;
-	struct bio_vec *iv;
-	unsigned long idx;
-
-	BUG_ON(bio == NULL);
-
-	bip = mempool_alloc(bio_integrity_pool, gfp_mask);
-	if (unlikely(bip == NULL)) {
-		printk(KERN_ERR "%s: could not alloc bip\n", __func__);
-		return NULL;
-	}
-
-	memset(bip, 0, sizeof(*bip));
-
-	iv = bvec_alloc_bs(gfp_mask, nr_vecs, &idx, integrity_bio_set);
-	if (unlikely(iv == NULL)) {
-		printk(KERN_ERR "%s: could not alloc bip_vec\n", __func__);
-		mempool_free(bip, bio_integrity_pool);
-		return NULL;
-	}
-
-	bip->bip_pool = idx;
-	bip->bip_vec = iv;
-	bip->bip_bio = bio;
-	bio->bi_integrity = bip;
-
-	return bip;
+	return bio_integrity_alloc_bioset(bio, gfp_mask, nr_vecs, fs_bio_set);
 }
 EXPORT_SYMBOL(bio_integrity_alloc);
 
 /**
  * bio_integrity_free - Free bio integrity payload
  * @bio:	bio containing bip to be freed
+ * @bs:		bio_set this bio was allocated from
  *
  * Description: Used to free the integrity portion of a bio. Usually
  * called from bio_free().
  */
-void bio_integrity_free(struct bio *bio)
+void bio_integrity_free(struct bio *bio, struct bio_set *bs)
 {
 	struct bio_integrity_payload *bip = bio->bi_integrity;
 
@@ -92,8 +150,10 @@
 	    && bip->bip_buf != NULL)
 		kfree(bip->bip_buf);
 
-	bvec_free_bs(integrity_bio_set, bip->bip_vec, bip->bip_pool);
-	mempool_free(bip, bio_integrity_pool);
+	if (use_bip_pool(bip->bip_slab))
+		mempool_free(bip, bs->bio_integrity_pool);
+	else
+		kmem_cache_free(bip_slab[bip->bip_slab].slab, bip);
 
 	bio->bi_integrity = NULL;
 }
@@ -114,7 +174,7 @@
 	struct bio_integrity_payload *bip = bio->bi_integrity;
 	struct bio_vec *iv;
 
-	if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_pool)) {
+	if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) {
 		printk(KERN_ERR "%s: bip_vec full\n", __func__);
 		return 0;
 	}
@@ -647,8 +707,8 @@
 	bp->iv1 = bip->bip_vec[0];
 	bp->iv2 = bip->bip_vec[0];
 
-	bp->bip1.bip_vec = &bp->iv1;
-	bp->bip2.bip_vec = &bp->iv2;
+	bp->bip1.bip_vec[0] = bp->iv1;
+	bp->bip2.bip_vec[0] = bp->iv2;
 
 	bp->iv1.bv_len = sectors * bi->tuple_size;
 	bp->iv2.bv_offset += sectors * bi->tuple_size;
@@ -667,17 +727,19 @@
  * @bio:	New bio
  * @bio_src:	Original bio
  * @gfp_mask:	Memory allocation mask
+ * @bs:		bio_set to allocate bip from
  *
  * Description:	Called to allocate a bip when cloning a bio
  */
-int bio_integrity_clone(struct bio *bio, struct bio *bio_src, gfp_t gfp_mask)
+int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+			gfp_t gfp_mask, struct bio_set *bs)
 {
 	struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
 	struct bio_integrity_payload *bip;
 
 	BUG_ON(bip_src == NULL);
 
-	bip = bio_integrity_alloc(bio, gfp_mask, bip_src->bip_vcnt);
+	bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
 
 	if (bip == NULL)
 		return -EIO;
@@ -693,25 +755,43 @@
 }
 EXPORT_SYMBOL(bio_integrity_clone);
 
-static int __init bio_integrity_init(void)
+int bioset_integrity_create(struct bio_set *bs, int pool_size)
 {
-	kintegrityd_wq = create_workqueue("kintegrityd");
+	unsigned int max_slab = vecs_to_idx(BIO_MAX_PAGES);
 
-	if (!kintegrityd_wq)
-		panic("Failed to create kintegrityd\n");
+	bs->bio_integrity_pool =
+		mempool_create_slab_pool(pool_size, bip_slab[max_slab].slab);
 
-	bio_integrity_slab = KMEM_CACHE(bio_integrity_payload,
-					SLAB_HWCACHE_ALIGN|SLAB_PANIC);
-
-	bio_integrity_pool = mempool_create_slab_pool(BIO_POOL_SIZE,
-						      bio_integrity_slab);
-	if (!bio_integrity_pool)
-		panic("bio_integrity: can't allocate bip pool\n");
-
-	integrity_bio_set = bioset_create(BIO_POOL_SIZE, 0);
-	if (!integrity_bio_set)
-		panic("bio_integrity: can't allocate bio_set\n");
+	if (!bs->bio_integrity_pool)
+		return -1;
 
 	return 0;
 }
-subsys_initcall(bio_integrity_init);
+EXPORT_SYMBOL(bioset_integrity_create);
+
+void bioset_integrity_free(struct bio_set *bs)
+{
+	if (bs->bio_integrity_pool)
+		mempool_destroy(bs->bio_integrity_pool);
+}
+EXPORT_SYMBOL(bioset_integrity_free);
+
+void __init bio_integrity_init(void)
+{
+	unsigned int i;
+
+	kintegrityd_wq = create_workqueue("kintegrityd");
+	if (!kintegrityd_wq)
+		panic("Failed to create kintegrityd\n");
+
+	for (i = 0 ; i < BIOVEC_NR_POOLS ; i++) {
+		unsigned int size;
+
+		size = sizeof(struct bio_integrity_payload)
+			+ bip_slab[i].nr_vecs * sizeof(struct bio_vec);
+
+		bip_slab[i].slab =
+			kmem_cache_create(bip_slab[i].name, size, 0,
+					  SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
+	}
+}
diff --git a/fs/bio.c b/fs/bio.c
index 24c9140..1486b19 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -238,7 +238,7 @@
 		bvec_free_bs(bs, bio->bi_io_vec, BIO_POOL_IDX(bio));
 
 	if (bio_integrity(bio))
-		bio_integrity_free(bio);
+		bio_integrity_free(bio, bs);
 
 	/*
 	 * If we have front padding, adjust the bio pointer before freeing
@@ -341,7 +341,7 @@
 static void bio_kmalloc_destructor(struct bio *bio)
 {
 	if (bio_integrity(bio))
-		bio_integrity_free(bio);
+		bio_integrity_free(bio, fs_bio_set);
 	kfree(bio);
 }
 
@@ -472,7 +472,7 @@
 	if (bio_integrity(bio)) {
 		int ret;
 
-		ret = bio_integrity_clone(b, bio, gfp_mask);
+		ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
 
 		if (ret < 0) {
 			bio_put(b);
@@ -1539,6 +1539,7 @@
 	if (bs->bio_pool)
 		mempool_destroy(bs->bio_pool);
 
+	bioset_integrity_free(bs);
 	biovec_free_pools(bs);
 	bio_put_slab(bs);
 
@@ -1579,6 +1580,9 @@
 	if (!bs->bio_pool)
 		goto bad;
 
+	if (bioset_integrity_create(bs, pool_size))
+		goto bad;
+
 	if (!biovec_create_pools(bs, pool_size))
 		return bs;
 
@@ -1616,6 +1620,7 @@
 	if (!bio_slabs)
 		panic("bio: can't allocate bios\n");
 
+	bio_integrity_init();
 	biovec_init_slabs();
 
 	fs_bio_set = bioset_create(BIO_POOL_SIZE, 0);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index b486898..3a9b7a5 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -5,7 +5,7 @@
 on by default if server supports it).  Add forceuid and forcegid
 mount options (so that when negotiating unix extensions specifying
 which uid mounted does not immediately force the server's reported
-uids to be overridden).
+uids to be overridden).  Add support for scope moutn parm.
 
 Version 1.58
 ------------
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 1b09f16..20692fb 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -49,6 +49,7 @@
 #define ASN1_OJI	6	/* Object Identifier  */
 #define ASN1_OJD	7	/* Object Description */
 #define ASN1_EXT	8	/* External */
+#define ASN1_ENUM	10	/* Enumerated */
 #define ASN1_SEQ	16	/* Sequence */
 #define ASN1_SET	17	/* Set */
 #define ASN1_NUMSTR	18	/* Numerical String */
@@ -78,10 +79,12 @@
 #define SPNEGO_OID_LEN 7
 #define NTLMSSP_OID_LEN  10
 #define KRB5_OID_LEN  7
+#define KRB5U2U_OID_LEN  8
 #define MSKRB5_OID_LEN  7
 static unsigned long SPNEGO_OID[7] = { 1, 3, 6, 1, 5, 5, 2 };
 static unsigned long NTLMSSP_OID[10] = { 1, 3, 6, 1, 4, 1, 311, 2, 2, 10 };
 static unsigned long KRB5_OID[7] = { 1, 2, 840, 113554, 1, 2, 2 };
+static unsigned long KRB5U2U_OID[8] = { 1, 2, 840, 113554, 1, 2, 2, 3 };
 static unsigned long MSKRB5_OID[7] = { 1, 2, 840, 48018, 1, 2, 2 };
 
 /*
@@ -122,6 +125,28 @@
 	return 1;
 }
 
+#if 0 /* will be needed later by spnego decoding/encoding of ntlmssp */
+static unsigned char
+asn1_enum_decode(struct asn1_ctx *ctx, __le32 *val)
+{
+	unsigned char ch;
+
+	if (ctx->pointer >= ctx->end) {
+		ctx->error = ASN1_ERR_DEC_EMPTY;
+		return 0;
+	}
+
+	ch = *(ctx->pointer)++; /* ch has 0xa, ptr points to lenght octet */
+	if ((ch) == ASN1_ENUM)  /* if ch value is ENUM, 0xa */
+		*val = *(++(ctx->pointer)); /* value has enum value */
+	else
+		return 0;
+
+	ctx->pointer++;
+	return 1;
+}
+#endif
+
 static unsigned char
 asn1_tag_decode(struct asn1_ctx *ctx, unsigned int *tag)
 {
@@ -476,10 +501,9 @@
 	unsigned int cls, con, tag, oidlen, rc;
 	bool use_ntlmssp = false;
 	bool use_kerberos = false;
+	bool use_kerberosu2u = false;
 	bool use_mskerberos = false;
 
-	*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
-
 	/* cifs_dump_mem(" Received SecBlob ", security_blob, length); */
 
 	asn1_open(&ctx, security_blob, length);
@@ -515,6 +539,7 @@
 		return 0;
 	}
 
+	/* SPNEGO */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding negTokenInit"));
 		return 0;
@@ -526,6 +551,7 @@
 		return 0;
 	}
 
+	/* negTokenInit */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding negTokenInit"));
 		return 0;
@@ -537,6 +563,7 @@
 		return 0;
 	}
 
+	/* sequence */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
 		return 0;
@@ -548,6 +575,7 @@
 		return 0;
 	}
 
+	/* sequence of */
 	if (asn1_header_decode
 	    (&ctx, &sequence_end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding 2nd part of negTokenInit"));
@@ -560,6 +588,7 @@
 		return 0;
 	}
 
+	/* list of security mechanisms */
 	while (!asn1_eoc_decode(&ctx, sequence_end)) {
 		rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag);
 		if (!rc) {
@@ -576,11 +605,15 @@
 
 				if (compare_oid(oid, oidlen, MSKRB5_OID,
 						MSKRB5_OID_LEN) &&
-						!use_kerberos)
+						!use_mskerberos)
 					use_mskerberos = true;
+				else if (compare_oid(oid, oidlen, KRB5U2U_OID,
+						     KRB5U2U_OID_LEN) &&
+						     !use_kerberosu2u)
+					use_kerberosu2u = true;
 				else if (compare_oid(oid, oidlen, KRB5_OID,
 						     KRB5_OID_LEN) &&
-						     !use_mskerberos)
+						     !use_kerberos)
 					use_kerberos = true;
 				else if (compare_oid(oid, oidlen, NTLMSSP_OID,
 						     NTLMSSP_OID_LEN))
@@ -593,7 +626,12 @@
 		}
 	}
 
+	/* mechlistMIC */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
+		/* Check if we have reached the end of the blob, but with
+		   no mechListMic (e.g. NTLMSSP instead of KRB5) */
+		if (ctx.error == ASN1_ERR_DEC_EMPTY)
+			goto decode_negtoken_exit;
 		cFYI(1, ("Error decoding last part negTokenInit exit3"));
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
@@ -602,6 +640,8 @@
 			 cls, con, tag, end, *end));
 		return 0;
 	}
+
+	/* sequence */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding last part negTokenInit exit5"));
 		return 0;
@@ -611,6 +651,7 @@
 			cls, con, tag, end, *end));
 	}
 
+	/* sequence of */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding last part negTokenInit exit 7"));
 		return 0;
@@ -619,6 +660,8 @@
 			 cls, con, tag, end, *end));
 		return 0;
 	}
+
+	/* general string */
 	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
 		cFYI(1, ("Error decoding last part negTokenInit exit9"));
 		return 0;
@@ -630,13 +673,13 @@
 	}
 	cFYI(1, ("Need to call asn1_octets_decode() function for %s",
 		 ctx.pointer));	/* is this UTF-8 or ASCII? */
-
+decode_negtoken_exit:
 	if (use_kerberos)
 		*secType = Kerberos;
 	else if (use_mskerberos)
 		*secType = MSKerberos;
 	else if (use_ntlmssp)
-		*secType = NTLMSSP;
+		*secType = RawNTLMSSP;
 
 	return 1;
 }
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d92114..9f669f9 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -333,6 +333,27 @@
 	kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
 }
 
+static void
+cifs_show_address(struct seq_file *s, struct TCP_Server_Info *server)
+{
+	seq_printf(s, ",addr=");
+
+	switch (server->addr.sockAddr.sin_family) {
+	case AF_INET:
+		seq_printf(s, "%pI4", &server->addr.sockAddr.sin_addr.s_addr);
+		break;
+	case AF_INET6:
+		seq_printf(s, "%pI6",
+			   &server->addr.sockAddr6.sin6_addr.s6_addr);
+		if (server->addr.sockAddr6.sin6_scope_id)
+			seq_printf(s, "%%%u",
+				   server->addr.sockAddr6.sin6_scope_id);
+		break;
+	default:
+		seq_printf(s, "(unknown)");
+	}
+}
+
 /*
  * cifs_show_options() is for displaying mount options in /proc/mounts.
  * Not all settable options are displayed but most of the important
@@ -343,83 +364,64 @@
 {
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
-	struct TCP_Server_Info *server;
 
 	cifs_sb = CIFS_SB(m->mnt_sb);
+	tcon = cifs_sb->tcon;
 
-	if (cifs_sb) {
-		tcon = cifs_sb->tcon;
-		if (tcon) {
-			seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
-			if (tcon->ses) {
-				if (tcon->ses->userName)
-					seq_printf(s, ",username=%s",
-					   tcon->ses->userName);
-				if (tcon->ses->domainName)
-					seq_printf(s, ",domain=%s",
-					   tcon->ses->domainName);
-				server = tcon->ses->server;
-				if (server) {
-					seq_printf(s, ",addr=");
-					switch (server->addr.sockAddr6.
-						sin6_family) {
-					case AF_INET6:
-						seq_printf(s, "%pI6",
-							   &server->addr.sockAddr6.sin6_addr);
-						break;
-					case AF_INET:
-						seq_printf(s, "%pI4",
-							   &server->addr.sockAddr.sin_addr.s_addr);
-						break;
-					}
-				}
-			}
-			if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) ||
-			   !(tcon->unix_ext))
-				seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
-			if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
-			   !(tcon->unix_ext))
-				seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
-			if (!tcon->unix_ext) {
-				seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+	seq_printf(s, ",unc=%s", cifs_sb->tcon->treeName);
+	if (tcon->ses->userName)
+		seq_printf(s, ",username=%s", tcon->ses->userName);
+	if (tcon->ses->domainName)
+		seq_printf(s, ",domain=%s", tcon->ses->domainName);
+
+	seq_printf(s, ",uid=%d", cifs_sb->mnt_uid);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
+		seq_printf(s, ",forceuid");
+
+	seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
+		seq_printf(s, ",forcegid");
+
+	cifs_show_address(s, tcon->ses->server);
+
+	if (!tcon->unix_ext)
+		seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
 					   cifs_sb->mnt_file_mode,
 					   cifs_sb->mnt_dir_mode);
-			}
-			if (tcon->seal)
-				seq_printf(s, ",seal");
-			if (tcon->nocase)
-				seq_printf(s, ",nocase");
-			if (tcon->retry)
-				seq_printf(s, ",hard");
-		}
-		if (cifs_sb->prepath)
-			seq_printf(s, ",prepath=%s", cifs_sb->prepath);
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
-			seq_printf(s, ",posixpaths");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
-			seq_printf(s, ",setuids");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
-			seq_printf(s, ",serverino");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
-			seq_printf(s, ",directio");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
-			seq_printf(s, ",nouser_xattr");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
-			seq_printf(s, ",mapchars");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
-			seq_printf(s, ",sfu");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
-			seq_printf(s, ",nobrl");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
-			seq_printf(s, ",cifsacl");
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
-			seq_printf(s, ",dynperm");
-		if (m->mnt_sb->s_flags & MS_POSIXACL)
-			seq_printf(s, ",acl");
+	if (tcon->seal)
+		seq_printf(s, ",seal");
+	if (tcon->nocase)
+		seq_printf(s, ",nocase");
+	if (tcon->retry)
+		seq_printf(s, ",hard");
+	if (cifs_sb->prepath)
+		seq_printf(s, ",prepath=%s", cifs_sb->prepath);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
+		seq_printf(s, ",posixpaths");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+		seq_printf(s, ",setuids");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+		seq_printf(s, ",serverino");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+		seq_printf(s, ",directio");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+		seq_printf(s, ",nouser_xattr");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+		seq_printf(s, ",mapchars");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+		seq_printf(s, ",sfu");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+		seq_printf(s, ",nobrl");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+		seq_printf(s, ",cifsacl");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+		seq_printf(s, ",dynperm");
+	if (m->mnt_sb->s_flags & MS_POSIXACL)
+		seq_printf(s, ",acl");
 
-		seq_printf(s, ",rsize=%d", cifs_sb->rsize);
-		seq_printf(s, ",wsize=%d", cifs_sb->wsize);
-	}
+	seq_printf(s, ",rsize=%d", cifs_sb->rsize);
+	seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+
 	return 0;
 }
 
@@ -535,9 +537,14 @@
 	if (tcon == NULL)
 		return;
 
-	lock_kernel();
 	read_lock(&cifs_tcp_ses_lock);
-	if (tcon->tc_count == 1)
+	if ((tcon->tc_count > 1) || (tcon->tidStatus == CifsExiting)) {
+		/* we have other mounts to same share or we have
+		   already tried to force umount this and woken up
+		   all waiting network requests, nothing to do */
+		read_unlock(&cifs_tcp_ses_lock);
+		return;
+	} else if (tcon->tc_count == 1)
 		tcon->tidStatus = CifsExiting;
 	read_unlock(&cifs_tcp_ses_lock);
 
@@ -552,9 +559,7 @@
 		wake_up_all(&tcon->ses->server->response_q);
 		msleep(1);
 	}
-/* BB FIXME - finish add checks for tidStatus BB */
 
-	unlock_kernel();
 	return;
 }
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index a61ab77..e1225e6 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -83,7 +83,7 @@
 	NTLM,			/* Legacy NTLM012 auth with NTLM hash */
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
-	NTLMSSP,		/* NTLMSSP via SPNEGO, NTLMv2 hash */
+/*	NTLMSSP, */ /* can use rawNTLMSSP instead of NTLMSSP via SPNEGO */
 	Kerberos,		/* Kerberos via SPNEGO */
 	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index f945232..c419416 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -74,7 +74,7 @@
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			enum securityEnum *secType);
-extern int cifs_inet_pton(const int, const char *source, void *dst);
+extern int cifs_convert_address(char *src, void *dst);
 extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
 extern void header_assemble(struct smb_hdr *, char /* command */ ,
 			    const struct cifsTconInfo *, int /* length of
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index b84c61d..61007c6 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -594,7 +594,7 @@
 	else if (secFlags & CIFSSEC_MAY_KRB5)
 		server->secType = Kerberos;
 	else if (secFlags & CIFSSEC_MAY_NTLMSSP)
-		server->secType = NTLMSSP;
+		server->secType = RawNTLMSSP;
 	else if (secFlags & CIFSSEC_MAY_LANMAN)
 		server->secType = LANMAN;
 /* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -729,7 +729,7 @@
 	 * the tcon is no longer on the list, so no need to take lock before
 	 * checking this.
 	 */
-	if (tcon->need_reconnect)
+	if ((tcon->need_reconnect) || (tcon->ses->need_reconnect))
 		return 0;
 
 	rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 97f4311..e16d759 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -70,7 +70,6 @@
 	mode_t file_mode;
 	mode_t dir_mode;
 	unsigned secFlg;
-	bool rw:1;
 	bool retry:1;
 	bool intr:1;
 	bool setuids:1;
@@ -832,7 +831,6 @@
 	vol->dir_mode = vol->file_mode = S_IRUGO | S_IXUGO | S_IWUSR;
 
 	/* vol->retry default is 0 (i.e. "soft" limited retry not hard retry) */
-	vol->rw = true;
 	/* default is always to request posix paths. */
 	vol->posix_paths = 1;
 	/* default to using server inode numbers where available */
@@ -1199,7 +1197,9 @@
 		} else if (strnicmp(data, "guest", 5) == 0) {
 			/* ignore */
 		} else if (strnicmp(data, "rw", 2) == 0) {
-			vol->rw = true;
+			/* ignore */
+		} else if (strnicmp(data, "ro", 2) == 0) {
+			/* ignore */
 		} else if (strnicmp(data, "noblocksend", 11) == 0) {
 			vol->noblocksnd = 1;
 		} else if (strnicmp(data, "noautotune", 10) == 0) {
@@ -1218,8 +1218,6 @@
 			    parse these options again and set anything and it
 			    is ok to just ignore them */
 			continue;
-		} else if (strnicmp(data, "ro", 2) == 0) {
-			vol->rw = false;
 		} else if (strnicmp(data, "hard", 4) == 0) {
 			vol->retry = 1;
 		} else if (strnicmp(data, "soft", 4) == 0) {
@@ -1386,8 +1384,10 @@
 		     server->addr.sockAddr.sin_addr.s_addr))
 			continue;
 		else if (addr->ss_family == AF_INET6 &&
-			 !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
-					  &addr6->sin6_addr))
+			 (!ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+					   &addr6->sin6_addr) ||
+			  server->addr.sockAddr6.sin6_scope_id !=
+					   addr6->sin6_scope_id))
 			continue;
 
 		++server->srv_count;
@@ -1433,28 +1433,15 @@
 
 	memset(&addr, 0, sizeof(struct sockaddr_storage));
 
+	cFYI(1, ("UNC: %s ip: %s", volume_info->UNC, volume_info->UNCip));
+
 	if (volume_info->UNCip && volume_info->UNC) {
-		rc = cifs_inet_pton(AF_INET, volume_info->UNCip,
-				    &sin_server->sin_addr.s_addr);
-
-		if (rc <= 0) {
-			/* not ipv4 address, try ipv6 */
-			rc = cifs_inet_pton(AF_INET6, volume_info->UNCip,
-					    &sin_server6->sin6_addr.in6_u);
-			if (rc > 0)
-				addr.ss_family = AF_INET6;
-		} else {
-			addr.ss_family = AF_INET;
-		}
-
-		if (rc <= 0) {
+		rc = cifs_convert_address(volume_info->UNCip, &addr);
+		if (!rc) {
 			/* we failed translating address */
 			rc = -EINVAL;
 			goto out_err;
 		}
-
-		cFYI(1, ("UNC: %s ip: %s", volume_info->UNC,
-			 volume_info->UNCip));
 	} else if (volume_info->UNCip) {
 		/* BB using ip addr as tcp_ses name to connect to the
 		   DFS root below */
@@ -1513,14 +1500,14 @@
 		cFYI(1, ("attempting ipv6 connect"));
 		/* BB should we allow ipv6 on port 139? */
 		/* other OS never observed in Wild doing 139 with v6 */
+		sin_server6->sin6_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr6, sin_server6,
 			sizeof(struct sockaddr_in6));
-		sin_server6->sin6_port = htons(volume_info->port);
 		rc = ipv6_connect(tcp_ses);
 	} else {
+		sin_server->sin_port = htons(volume_info->port);
 		memcpy(&tcp_ses->addr.sockAddr, sin_server,
 			sizeof(struct sockaddr_in));
-		sin_server->sin_port = htons(volume_info->port);
 		rc = ipv4_connect(tcp_ses);
 	}
 	if (rc < 0) {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 3758965..7dc6b74 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -307,8 +307,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	if (oplockEnabled)
@@ -540,8 +541,9 @@
 			buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
 			if (buf == NULL) {
 				kfree(full_path);
+				rc = -ENOMEM;
 				FreeXid(xid);
-				return -ENOMEM;
+				return rc;
 			}
 
 			rc = CIFSSMBOpen(xid, pTcon, full_path,
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index df4a306..8794814 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -35,26 +35,11 @@
  * 		0 - name is not IP
  */
 static int
-is_ip(const char *name)
+is_ip(char *name)
 {
-	int rc;
-	struct sockaddr_in sin_server;
-	struct sockaddr_in6 sin_server6;
+	struct sockaddr_storage ss;
 
-	rc = cifs_inet_pton(AF_INET, name,
-			&sin_server.sin_addr.s_addr);
-
-	if (rc <= 0) {
-		/* not ipv4 address, try ipv6 */
-		rc = cifs_inet_pton(AF_INET6, name,
-				&sin_server6.sin6_addr.in6_u);
-		if (rc > 0)
-			return 1;
-	} else {
-		return 1;
-	}
-	/* we failed translating address */
-	return 0;
+	return cifs_convert_address(name, &ss);
 }
 
 static int
@@ -72,7 +57,7 @@
 	ip[datalen] = '\0';
 
 	/* make sure this looks like an address */
-	if (!is_ip((const char *) ip)) {
+	if (!is_ip(ip)) {
 		kfree(ip);
 		return -EINVAL;
 	}
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 0686684..97ce4bf 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -300,14 +300,16 @@
 	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
 	pCifsFile = cifs_fill_filedata(file);
 	if (pCifsFile) {
+		rc = 0;
 		FreeXid(xid);
-		return 0;
+		return rc;
 	}
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	cFYI(1, ("inode = 0x%p file flags are 0x%x for %s",
@@ -491,11 +493,12 @@
 		return -EBADF;
 
 	xid = GetXid();
-	mutex_unlock(&pCifsFile->fh_mutex);
+	mutex_lock(&pCifsFile->fh_mutex);
 	if (!pCifsFile->invalidHandle) {
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
+		rc = 0;
 		FreeXid(xid);
-		return 0;
+		return rc;
 	}
 
 	if (file->f_path.dentry == NULL) {
@@ -524,7 +527,7 @@
 	if (full_path == NULL) {
 		rc = -ENOMEM;
 reopen_error_exit:
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
 		FreeXid(xid);
 		return rc;
 	}
@@ -566,14 +569,14 @@
 			 cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 				CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc) {
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
 		cFYI(1, ("cifs_open returned 0x%x", rc));
 		cFYI(1, ("oplock: %d", oplock));
 	} else {
 reopen_success:
 		pCifsFile->netfid = netfid;
 		pCifsFile->invalidHandle = false;
-		mutex_lock(&pCifsFile->fh_mutex);
+		mutex_unlock(&pCifsFile->fh_mutex);
 		pCifsInode = CIFS_I(inode);
 		if (pCifsInode) {
 			if (can_flush) {
@@ -845,8 +848,9 @@
 	tcon = cifs_sb->tcon;
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	netfid = ((struct cifsFileInfo *)file->private_data)->netfid;
 
@@ -1805,8 +1809,9 @@
 	pTcon = cifs_sb->tcon;
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	open_file = (struct cifsFileInfo *)file->private_data;
 
@@ -1885,8 +1890,9 @@
 	pTcon = cifs_sb->tcon;
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	open_file = (struct cifsFileInfo *)file->private_data;
 
@@ -2019,8 +2025,9 @@
 
 	xid = GetXid();
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 	open_file = (struct cifsFileInfo *)file->private_data;
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
@@ -2185,8 +2192,9 @@
 	xid = GetXid();
 
 	if (file->private_data == NULL) {
+		rc = -EBADF;
 		FreeXid(xid);
-		return -EBADF;
+		return rc;
 	}
 
 	cFYI(1, ("readpage %p at offset %d 0x%x\n",
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fad882b..155c9e7 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -988,8 +988,9 @@
 	 * sb->s_vfs_rename_mutex here */
 	full_path = build_path_from_dentry(dentry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	if ((tcon->ses->capabilities & CAP_UNIX) &&
@@ -1118,8 +1119,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	if ((pTcon->ses->capabilities & CAP_UNIX) &&
@@ -1303,8 +1305,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	rc = CIFSSMBRmDir(xid, pTcon, full_path, cifs_sb->local_nls,
@@ -1508,8 +1511,9 @@
 	   since that would deadlock */
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	cFYI(1, ("Revalidate: %s inode 0x%p count %d dentry: 0x%p d_time %ld "
 		 "jiffies %ld", full_path, direntry->d_inode,
@@ -1911,8 +1915,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	/*
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index cd83c53..fc1e048 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -172,8 +172,9 @@
 	full_path = build_path_from_dentry(direntry);
 
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 
 	cFYI(1, ("Full path: %s", full_path));
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 32d6baa..bd6d689 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -133,10 +133,12 @@
 	{0, 0}
 };
 
-/* Convert string containing dotted ip address to binary form */
-/* returns 0 if invalid address */
-
-int
+/*
+ * Convert a string containing text IPv4 or IPv6 address to binary form.
+ *
+ * Returns 0 on failure.
+ */
+static int
 cifs_inet_pton(const int address_family, const char *cp, void *dst)
 {
 	int ret = 0;
@@ -153,6 +155,52 @@
 	return ret;
 }
 
+/*
+ * Try to convert a string to an IPv4 address and then attempt to convert
+ * it to an IPv6 address if that fails. Set the family field if either
+ * succeeds. If it's an IPv6 address and it has a '%' sign in it, try to
+ * treat the part following it as a numeric sin6_scope_id.
+ *
+ * Returns 0 on failure.
+ */
+int
+cifs_convert_address(char *src, void *dst)
+{
+	int rc;
+	char *pct, *endp;
+	struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
+	struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
+
+	/* IPv4 address */
+	if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) {
+		s4->sin_family = AF_INET;
+		return 1;
+	}
+
+	/* temporarily terminate string */
+	pct = strchr(src, '%');
+	if (pct)
+		*pct = '\0';
+
+	rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr);
+
+	/* repair temp termination (if any) and make pct point to scopeid */
+	if (pct)
+		*pct++ = '%';
+
+	if (!rc)
+		return rc;
+
+	s6->sin6_family = AF_INET6;
+	if (pct) {
+		s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
+		if (!*pct || *endp)
+			return 0;
+	}
+
+	return rc;
+}
+
 /*****************************************************************************
 convert a NT status code to a dos class/code
  *****************************************************************************/
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 897a052..7085a62 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -802,7 +802,7 @@
 #endif /* CONFIG_CIFS_UPCALL */
 	} else {
 #ifdef CONFIG_CIFS_EXPERIMENTAL
-		if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+		if (type == RawNTLMSSP) {
 			if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
 				cERROR(1, ("NTLMSSP requires Unicode support"));
 				rc = -ENOSYS;
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index e9527ee..a75afa3 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -64,8 +64,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	if (ea_name == NULL) {
 		cFYI(1, ("Null xattr names not supported"));
@@ -118,8 +119,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	/* return dos attributes as pseudo xattr */
 	/* return alt name if available as pseudo attr */
@@ -225,8 +227,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	/* return dos attributes as pseudo xattr */
 	/* return alt name if available as pseudo attr */
@@ -351,8 +354,9 @@
 
 	full_path = build_path_from_dentry(direntry);
 	if (full_path == NULL) {
+		rc = -ENOMEM;
 		FreeXid(xid);
-		return -ENOMEM;
+		return rc;
 	}
 	/* return dos attributes as pseudo xattr */
 	/* return alt name if available as pseudo attr */
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 3f0e197..31d12de 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -14,35 +14,44 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/anon_inodes.h>
-#include <linux/eventfd.h>
 #include <linux/syscalls.h>
 #include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/eventfd.h>
 
 struct eventfd_ctx {
+	struct kref kref;
 	wait_queue_head_t wqh;
 	/*
 	 * Every time that a write(2) is performed on an eventfd, the
 	 * value of the __u64 being written is added to "count" and a
 	 * wakeup is performed on "wqh". A read(2) will return the "count"
 	 * value to userspace, and will reset "count" to zero. The kernel
-	 * size eventfd_signal() also, adds to the "count" counter and
+	 * side eventfd_signal() also, adds to the "count" counter and
 	 * issue a wakeup.
 	 */
 	__u64 count;
 	unsigned int flags;
 };
 
-/*
- * Adds "n" to the eventfd counter "count". Returns "n" in case of
- * success, or a value lower then "n" in case of coutner overflow.
- * This function is supposed to be called by the kernel in paths
- * that do not allow sleeping. In this function we allow the counter
- * to reach the ULLONG_MAX value, and we signal this as overflow
- * condition by returining a POLLERR to poll(2).
+/**
+ * eventfd_signal - Adds @n to the eventfd counter.
+ * @ctx: [in] Pointer to the eventfd context.
+ * @n: [in] Value of the counter to be added to the eventfd internal counter.
+ *          The value cannot be negative.
+ *
+ * This function is supposed to be called by the kernel in paths that do not
+ * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX
+ * value, and we signal this as overflow condition by returining a POLLERR
+ * to poll(2).
+ *
+ * Returns @n in case of success, a non-negative number lower than @n in case
+ * of overflow, or the following error codes:
+ *
+ * -EINVAL    : The value of @n is negative.
  */
-int eventfd_signal(struct file *file, int n)
+int eventfd_signal(struct eventfd_ctx *ctx, int n)
 {
-	struct eventfd_ctx *ctx = file->private_data;
 	unsigned long flags;
 
 	if (n < 0)
@@ -59,9 +68,45 @@
 }
 EXPORT_SYMBOL_GPL(eventfd_signal);
 
+static void eventfd_free(struct kref *kref)
+{
+	struct eventfd_ctx *ctx = container_of(kref, struct eventfd_ctx, kref);
+
+	kfree(ctx);
+}
+
+/**
+ * eventfd_ctx_get - Acquires a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to the eventfd context.
+ *
+ * Returns: In case of success, returns a pointer to the eventfd context.
+ */
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx)
+{
+	kref_get(&ctx->kref);
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_get);
+
+/**
+ * eventfd_ctx_put - Releases a reference to the internal eventfd context.
+ * @ctx: [in] Pointer to eventfd context.
+ *
+ * The eventfd context reference must have been previously acquired either
+ * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ */
+void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+	kref_put(&ctx->kref, eventfd_free);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_put);
+
 static int eventfd_release(struct inode *inode, struct file *file)
 {
-	kfree(file->private_data);
+	struct eventfd_ctx *ctx = file->private_data;
+
+	wake_up_poll(&ctx->wqh, POLLHUP);
+	eventfd_ctx_put(ctx);
 	return 0;
 }
 
@@ -185,6 +230,16 @@
 	.write		= eventfd_write,
 };
 
+/**
+ * eventfd_fget - Acquire a reference of an eventfd file descriptor.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the eventfd file structure in case of success, or the
+ * following error pointer:
+ *
+ * -EBADF    : Invalid @fd file descriptor.
+ * -EINVAL   : The @fd file descriptor is not an eventfd file.
+ */
 struct file *eventfd_fget(int fd)
 {
 	struct file *file;
@@ -201,6 +256,48 @@
 }
 EXPORT_SYMBOL_GPL(eventfd_fget);
 
+/**
+ * eventfd_ctx_fdget - Acquires a reference to the internal eventfd context.
+ * @fd: [in] Eventfd file descriptor.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointers returned by the following functions:
+ *
+ * eventfd_fget
+ */
+struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+	struct file *file;
+	struct eventfd_ctx *ctx;
+
+	file = eventfd_fget(fd);
+	if (IS_ERR(file))
+		return (struct eventfd_ctx *) file;
+	ctx = eventfd_ctx_get(file->private_data);
+	fput(file);
+
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fdget);
+
+/**
+ * eventfd_ctx_fileget - Acquires a reference to the internal eventfd context.
+ * @file: [in] Eventfd file pointer.
+ *
+ * Returns a pointer to the internal eventfd context, otherwise the error
+ * pointer:
+ *
+ * -EINVAL   : The @fd file descriptor is not an eventfd file.
+ */
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file)
+{
+	if (file->f_op != &eventfd_fops)
+		return ERR_PTR(-EINVAL);
+
+	return eventfd_ctx_get(file->private_data);
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_fileget);
+
 SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
 	int fd;
@@ -217,6 +314,7 @@
 	if (!ctx)
 		return -ENOMEM;
 
+	kref_init(&ctx->kref);
 	init_waitqueue_head(&ctx->wqh);
 	ctx->count = count;
 	ctx->flags = flags;
diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
index 6524eca..e1dedb0 100644
--- a/fs/ext2/namei.c
+++ b/fs/ext2/namei.c
@@ -66,8 +66,16 @@
 	inode = NULL;
 	if (ino) {
 		inode = ext2_iget(dir->i_sb, ino);
-		if (IS_ERR(inode))
-			return ERR_CAST(inode);
+		if (unlikely(IS_ERR(inode))) {
+			if (PTR_ERR(inode) == -ESTALE) {
+				ext2_error(dir->i_sb, __func__,
+						"deleted inode referenced: %lu",
+						ino);
+				return ERR_PTR(-EIO);
+			} else {
+				return ERR_CAST(inode);
+			}
+		}
 	}
 	return d_splice_alias(inode, dentry);
 }
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index fe02ad4..032604e 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -972,6 +972,7 @@
 	sb->s_blocksize_bits = 10;
 	sb->s_magic = HOSTFS_SUPER_MAGIC;
 	sb->s_op = &hostfs_sbops;
+	sb->s_maxbytes = MAX_LFS_FILESIZE;
 
 	/* NULL is printed as <NULL> by sprintf: avoid that. */
 	if (req_root == NULL)
diff --git a/fs/namei.c b/fs/namei.c
index 5b961eb..f3c5b27 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1761,6 +1761,10 @@
 			goto exit;
 		}
 		filp = nameidata_to_filp(&nd, open_flag);
+		if (IS_ERR(filp))
+			ima_counts_put(&nd.path,
+				       acc_mode & (MAY_READ | MAY_WRITE |
+						   MAY_EXEC));
 		mnt_drop_write(nd.path.mnt);
 		if (nd.root.mnt)
 			path_put(&nd.root);
@@ -1817,6 +1821,9 @@
 		goto exit;
 	}
 	filp = nameidata_to_filp(&nd, open_flag);
+	if (IS_ERR(filp))
+		ima_counts_put(&nd.path,
+			       acc_mode & (MAY_READ | MAY_WRITE | MAY_EXEC));
 	/*
 	 * It is now safe to drop the mnt write
 	 * because the filp has had a write taken
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index d7d50d7..aa00800 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -97,4 +97,8 @@
 #define PER_CPU_ATTRIBUTES
 #endif
 
+#ifndef PER_CPU_DEF_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
+#endif
+
 #endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 92b73b6..dccdbed 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -441,7 +441,8 @@
 	}
 
 #ifdef CONFIG_CONSTRUCTORS
-#define KERNEL_CTORS()	VMLINUX_SYMBOL(__ctors_start) = .; \
+#define KERNEL_CTORS()	. = ALIGN(8);			   \
+			VMLINUX_SYMBOL(__ctors_start) = .; \
 			*(.ctors)			   \
 			VMLINUX_SYMBOL(__ctors_end) = .;
 #else
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c263e4d..7d6c9a2 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -35,11 +35,11 @@
 } __attribute__((packed));
 
 /* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
-#define EDID_TIMING_ASPECT_SHIFT 0
+#define EDID_TIMING_ASPECT_SHIFT 6
 #define EDID_TIMING_ASPECT_MASK  (0x3 << EDID_TIMING_ASPECT_SHIFT)
 
 /* need to add 60 */
-#define EDID_TIMING_VFREQ_SHIFT  2
+#define EDID_TIMING_VFREQ_SHIFT  0
 #define EDID_TIMING_VFREQ_MASK   (0x3f << EDID_TIMING_VFREQ_SHIFT)
 
 struct std_timing {
@@ -47,11 +47,11 @@
 	u8 vfreq_aspect;
 } __attribute__((packed));
 
-#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 6)
-#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 5)
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
 #define DRM_EDID_PT_SEPARATE_SYNC  (3 << 3)
-#define DRM_EDID_PT_STEREO         (1 << 2)
-#define DRM_EDID_PT_INTERLACED     (1 << 1)
+#define DRM_EDID_PT_STEREO         (1 << 5)
+#define DRM_EDID_PT_INTERLACED     (1 << 7)
 
 /* If detailed data is pixel timing */
 struct detailed_pixel_timing {
@@ -93,7 +93,7 @@
 } __attribute__((packed));
 
 struct detailed_data_wpindex {
-	u8 white_xy_lo; /* Upper 2 bits each */
+	u8 white_yx_lo; /* Lower 2 bits each */
 	u8 white_x_hi;
 	u8 white_y_hi;
 	u8 gamma; /* need to divide by 100 then add 1 */
@@ -135,21 +135,21 @@
 	} data;
 } __attribute__((packed));
 
-#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 7)
-#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 5)
-#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 4)
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 2)
 #define DRM_EDID_INPUT_SEPARATE_SYNCS  (1 << 3)
-#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 2)
-#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 1)
-#define DRM_EDID_INPUT_DIGITAL         (1 << 0) /* bits above must be zero if set */
+#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL         (1 << 7) /* bits below must be zero if set */
 
-#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 7)
-#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 6)
-#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 5)
+#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 2)
 #define DRM_EDID_FEATURE_DISPLAY_TYPE     (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
-#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 2)
-#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 1)
-#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 0)
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 7)
 
 struct edid {
 	u8 header[8];
diff --git a/include/linux/aio.h b/include/linux/aio.h
index b16a957..47f7d93 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -121,9 +121,9 @@
 
 	/*
 	 * If the aio_resfd field of the userspace iocb is not zero,
-	 * this is the underlying file* to deliver event to.
+	 * this is the underlying eventfd context to deliver events to.
 	 */
-	struct file		*ki_eventfd;
+	struct eventfd_ctx	*ki_eventfd;
 };
 
 #define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 2a04eb5..2892b71 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -319,7 +319,6 @@
  */
 struct bio_integrity_payload {
 	struct bio		*bip_bio;	/* parent bio */
-	struct bio_vec		*bip_vec;	/* integrity data vector */
 
 	sector_t		bip_sector;	/* virtual start sector */
 
@@ -328,11 +327,12 @@
 
 	unsigned int		bip_size;
 
-	unsigned short		bip_pool;	/* pool the ivec came from */
+	unsigned short		bip_slab;	/* slab the bip came from */
 	unsigned short		bip_vcnt;	/* # of integrity bio_vecs */
 	unsigned short		bip_idx;	/* current bip_vec index */
 
 	struct work_struct	bip_work;	/* I/O completion */
+	struct bio_vec		bip_vec[0];	/* embedded bvec array */
 };
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
@@ -430,6 +430,9 @@
 	unsigned int front_pad;
 
 	mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	mempool_t *bio_integrity_pool;
+#endif
 	mempool_t *bvec_pool;
 };
 
@@ -634,8 +637,9 @@
 
 #define bio_integrity(bio) (bio->bi_integrity != NULL)
 
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
 extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
-extern void bio_integrity_free(struct bio *);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
 extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
 extern int bio_integrity_enabled(struct bio *bio);
 extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
@@ -645,21 +649,27 @@
 extern void bio_integrity_advance(struct bio *, unsigned int);
 extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
 extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init(void);
 
 #else /* CONFIG_BLK_DEV_INTEGRITY */
 
 #define bio_integrity(a)		(0)
+#define bioset_integrity_create(a, b)	(0)
 #define bio_integrity_prep(a)		(0)
 #define bio_integrity_enabled(a)	(0)
-#define bio_integrity_clone(a, b, c)	(0)
-#define bio_integrity_free(a)		do { } while (0)
+#define bio_integrity_clone(a, b, c, d)	(0)
+#define bioset_integrity_free(a)	do { } while (0)
+#define bio_integrity_free(a, b)	do { } while (0)
 #define bio_integrity_endio(a, b)	do { } while (0)
 #define bio_integrity_advance(a, b)	do { } while (0)
 #define bio_integrity_trim(a, b, c)	do { } while (0)
 #define bio_integrity_split(a, b, c)	do { } while (0)
 #define bio_integrity_set_tag(a, b, c)	do { } while (0)
 #define bio_integrity_get_tag(a, b, c)	do { } while (0)
+#define bio_integrity_init(a)		do { } while (0)
 
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8963d91..49ae079 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -301,12 +301,6 @@
 #define BLK_SCSI_MAX_CMDS	(256)
 #define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
 
-struct blk_cmd_filter {
-	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
-	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-	struct kobject kobj;
-};
-
 struct queue_limits {
 	unsigned long		bounce_pfn;
 	unsigned long		seg_boundary_mask;
@@ -445,7 +439,6 @@
 #if defined(CONFIG_BLK_DEV_BSG)
 	struct bsg_class_device bsg_dev;
 #endif
-	struct blk_cmd_filter cmd_filter;
 };
 
 #define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
@@ -998,13 +991,7 @@
 	return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL);
 }
 
-/*
-* command filter functions
-*/
-extern int blk_verify_command(struct blk_cmd_filter *filter,
-			      unsigned char *cmd, fmode_t has_write_perm);
-extern void blk_unregister_filter(struct gendisk *disk);
-extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
+extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
 
 #define MAX_PHYS_SEGMENTS 128
 #define MAX_HW_SEGMENTS 128
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index f45a8ae..3b85ba6 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -8,10 +8,8 @@
 #ifndef _LINUX_EVENTFD_H
 #define _LINUX_EVENTFD_H
 
-#ifdef CONFIG_EVENTFD
-
-/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/fcntl.h>
+#include <linux/file.h>
 
 /*
  * CAREFUL: Check include/asm-generic/fcntl.h when defining
@@ -27,16 +25,37 @@
 #define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK)
 #define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE)
 
+#ifdef CONFIG_EVENTFD
+
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx);
+void eventfd_ctx_put(struct eventfd_ctx *ctx);
 struct file *eventfd_fget(int fd);
-int eventfd_signal(struct file *file, int n);
+struct eventfd_ctx *eventfd_ctx_fdget(int fd);
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
+int eventfd_signal(struct eventfd_ctx *ctx, int n);
 
 #else /* CONFIG_EVENTFD */
 
-#define eventfd_fget(fd) ERR_PTR(-ENOSYS)
-static inline int eventfd_signal(struct file *file, int n)
-{ return 0; }
+/*
+ * Ugly ugly ugly error layer to support modules that uses eventfd but
+ * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO.
+ */
+static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+	return ERR_PTR(-ENOSYS);
+}
 
-#endif /* CONFIG_EVENTFD */
+static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+{
+	return -ENOSYS;
+}
+
+static inline void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+
+}
+
+#endif
 
 #endif /* _LINUX_EVENTFD_H */
 
diff --git a/include/linux/fb.h b/include/linux/fb.h
index dd68358..f847df9 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -819,6 +819,7 @@
 	int node;
 	int flags;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
+	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
 	struct fb_var_screeninfo var;	/* Current var */
 	struct fb_fix_screeninfo fix;	/* Current fix */
 	struct fb_monspecs monspecs;	/* Current Monitor specs */
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 44848aa..6c3de99 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -280,7 +280,7 @@
 	assert_spin_locked(&dentry->d_lock);
 
 	parent = dentry->d_parent;
-	if (fsnotify_inode_watches_children(parent->d_inode))
+	if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
 		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
 	else
 		dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 7400900..54648e6 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -21,6 +21,7 @@
 #include <linux/list.h>
 #include <linux/wait.h>
 #include <linux/percpu.h>
+#include <linux/timer.h>
 
 
 struct hrtimer_clock_base;
@@ -447,6 +448,8 @@
 
 static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
 {
+	if (likely(!timer->start_pid))
+		return;
 	timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
 				 timer->function, timer->start_comm, 0);
 }
@@ -456,6 +459,8 @@
 
 static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
 {
+	if (likely(!timer_stats_active))
+		return;
 	__timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0));
 }
 
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 95c6e00..edc93a6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1062,7 +1062,6 @@
 extern int ide_vlb_clk;
 extern int ide_pci_clk;
 
-unsigned int ide_rq_bytes(struct request *);
 int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
 void ide_kill_rq(ide_drive_t *, struct request *);
 
@@ -1361,7 +1360,6 @@
 #ifdef CONFIG_BLK_DEV_IDEDMA
 int ide_dma_good_drive(ide_drive_t *);
 int __ide_dma_bad_drive(ide_drive_t *);
-int ide_id_dma_bug(ide_drive_t *);
 
 u8 ide_find_dma_mode(ide_drive_t *, u8);
 
@@ -1402,7 +1400,6 @@
 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
 
 #else
-static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
@@ -1422,6 +1419,7 @@
 
 #ifdef CONFIG_BLK_DEV_IDEACPI
 int ide_acpi_init(void);
+bool ide_port_acpi(ide_hwif_t *hwif);
 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
@@ -1430,6 +1428,7 @@
 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
 #else
 static inline int ide_acpi_init(void) { return 0; }
+static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
diff --git a/include/linux/ima.h b/include/linux/ima.h
index b1b827d..0e3f2a4 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -24,6 +24,7 @@
 extern void ima_file_free(struct file *file);
 extern int ima_file_mmap(struct file *file, unsigned long prot);
 extern void ima_counts_get(struct file *file);
+extern void ima_counts_put(struct path *path, int mask);
 
 #else
 static inline int ima_bprm_check(struct linux_binprm *bprm)
@@ -60,5 +61,10 @@
 {
 	return;
 }
+
+static inline void ima_counts_put(struct path *path, int mask)
+{
+	return;
+}
 #endif /* CONFIG_IMA_H */
 #endif /* _LINUX_IMA_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fac104e..d6320a3 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -303,6 +303,7 @@
 extern int panic_timeout;
 extern int panic_on_oops;
 extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
 extern const char *print_tainted(void);
 extern void add_taint(unsigned flag);
 extern int test_taint(unsigned flag);
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index aacc544..16713dc 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -125,6 +125,7 @@
 struct kvm {
 	struct mutex lock; /* protects the vcpus array and APIC accesses */
 	spinlock_t mmu_lock;
+	spinlock_t requests_lock;
 	struct rw_semaphore slots_lock;
 	struct mm_struct *mm; /* userspace tied to this vm */
 	int nmemslots;
diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h
new file mode 100644
index 0000000..afc9f9f
--- /dev/null
+++ b/include/linux/leds-lp3944.h
@@ -0,0 +1,53 @@
+/*
+ * leds-lp3944.h - platform data structure for lp3944 led controller
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_LP3944_H
+#define __LINUX_LEDS_LP3944_H
+
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+
+#define LP3944_LED0 0
+#define LP3944_LED1 1
+#define LP3944_LED2 2
+#define LP3944_LED3 3
+#define LP3944_LED4 4
+#define LP3944_LED5 5
+#define LP3944_LED6 6
+#define LP3944_LED7 7
+#define LP3944_LEDS_MAX 8
+
+#define LP3944_LED_STATUS_MASK	0x03
+enum lp3944_status {
+	LP3944_LED_STATUS_OFF  = 0x0,
+	LP3944_LED_STATUS_ON   = 0x1,
+	LP3944_LED_STATUS_DIM0 = 0x2,
+	LP3944_LED_STATUS_DIM1 = 0x3
+};
+
+enum lp3944_type {
+	LP3944_LED_TYPE_NONE,
+	LP3944_LED_TYPE_LED,
+	LP3944_LED_TYPE_LED_INVERTED,
+};
+
+struct lp3944_led {
+	char *name;
+	enum lp3944_type type;
+	enum lp3944_status status;
+};
+
+struct lp3944_platform_data {
+	struct lp3944_led leds[LP3944_LEDS_MAX];
+	u8 leds_size;
+};
+
+#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 376fe07..d8bf966 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -45,7 +45,10 @@
 	/* Get LED brightness level */
 	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
 
-	/* Activate hardware accelerated blink */
+	/* Activate hardware accelerated blink, delays are in
+	 * miliseconds and if none is provided then a sensible default
+	 * should be chosen. The call can adjust the timings if it can't
+	 * match the values specified exactly. */
 	int		(*blink_set)(struct led_classdev *led_cdev,
 				     unsigned long *delay_on,
 				     unsigned long *delay_off);
@@ -141,9 +144,14 @@
 	const char *name;
 	const char *default_trigger;
 	unsigned 	gpio;
-	u8 		active_low : 1;
-	u8		retain_state_suspended : 1;
+	unsigned	active_low : 1;
+	unsigned	retain_state_suspended : 1;
+	unsigned	default_state : 2;
+	/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
 };
+#define LEDS_GPIO_DEFSTATE_OFF	0
+#define LEDS_GPIO_DEFSTATE_ON	1
+#define LEDS_GPIO_DEFSTATE_KEEP	2
 
 struct gpio_led_platform_data {
 	int 		num_leds;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d006e93..ba3a7cb 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -826,7 +826,7 @@
 extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
 
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-			unsigned long start, int len, int write, int force,
+			unsigned long start, int nr_pages, int write, int force,
 			struct page **pages, struct vm_area_struct **vmas);
 int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages);
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 3430c77..7ae0533 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -81,4 +81,17 @@
 	__u8 state_mask, status_mask;
 };
 
+struct xt_conntrack_mtinfo2 {
+	union nf_inet_addr origsrc_addr, origsrc_mask;
+	union nf_inet_addr origdst_addr, origdst_mask;
+	union nf_inet_addr replsrc_addr, replsrc_mask;
+	union nf_inet_addr repldst_addr, repldst_mask;
+	__u32 expires_min, expires_max;
+	__u16 l4proto;
+	__be16 origsrc_port, origdst_port;
+	__be16 replsrc_port, repldst_port;
+	__u16 match_flags, invert_flags;
+	__u16 state_mask, status_mask;
+};
+
 #endif /*_XT_CONNTRACK_H*/
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
index fd2272e..18afa49 100644
--- a/include/linux/netfilter/xt_osf.h
+++ b/include/linux/netfilter/xt_osf.h
@@ -20,6 +20,8 @@
 #ifndef _XT_OSF_H
 #define _XT_OSF_H
 
+#include <linux/types.h>
+
 #define MAXGENRELEN		32
 
 #define XT_OSF_GENRE		(1<<0)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a3b0003..73b46b6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2645,6 +2645,7 @@
 #define PCI_DEVICE_ID_NETMOS_9835	0x9835
 #define PCI_DEVICE_ID_NETMOS_9845	0x9845
 #define PCI_DEVICE_ID_NETMOS_9855	0x9855
+#define PCI_DEVICE_ID_NETMOS_9901	0x9901
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 8f921d7..68438e1 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -24,7 +24,8 @@
 
 #define DEFINE_PER_CPU_SECTION(type, name, section)			\
 	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
-	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+	PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES			\
+	__typeof__(type) per_cpu__##name
 
 /*
  * Variant on the per-CPU variable declaration/definition theme used for
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 89698d8..5e970c7 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -178,8 +178,10 @@
 				mmap           :  1, /* include mmap data     */
 				comm	       :  1, /* include comm data     */
 				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
 
-				__reserved_1   : 53;
+				__reserved_1   : 51;
 
 	__u32			wakeup_events;	/* wakeup every n events */
 	__u32			__reserved_2;
@@ -232,6 +234,14 @@
 	__u32	lock;			/* seqlock for synchronization */
 	__u32	index;			/* hardware counter identifier */
 	__s64	offset;			/* add to hardware counter value */
+	__u64	time_enabled;		/* time counter active */
+	__u64	time_running;		/* time counter on cpu */
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u64	__reserved[123];	/* align to 1k */
 
 	/*
 	 * Control data for the mmap() data buffer.
@@ -253,7 +263,6 @@
 #define PERF_EVENT_MISC_KERNEL			(1 << 0)
 #define PERF_EVENT_MISC_USER			(2 << 0)
 #define PERF_EVENT_MISC_HYPERVISOR		(3 << 0)
-#define PERF_EVENT_MISC_OVERFLOW		(1 << 2)
 
 struct perf_event_header {
 	__u32	type;
@@ -327,9 +336,18 @@
 	PERF_EVENT_FORK			= 7,
 
 	/*
-	 * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
-	 * will be PERF_SAMPLE_*
-	 *
+	 * struct {
+	 * 	struct perf_event_header	header;
+	 * 	u32				pid, tid;
+	 * 	u64				value;
+	 * 	{ u64		time_enabled; 	} && PERF_FORMAT_ENABLED
+	 * 	{ u64		time_running; 	} && PERF_FORMAT_RUNNING
+	 * 	{ u64		parent_id;	} && PERF_FORMAT_ID
+	 * };
+	 */
+	PERF_EVENT_READ			= 8,
+
+	/*
 	 * struct {
 	 *	struct perf_event_header	header;
 	 *
@@ -337,8 +355,9 @@
 	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
 	 *	{ u64			time;     } && PERF_SAMPLE_TIME
 	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
-	 *	{ u64			config;   } && PERF_SAMPLE_CONFIG
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
 	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 * 	{ u64			period;   } && PERF_SAMPLE_PERIOD
 	 *
 	 *	{ u64			nr;
 	 *	  { u64 id, val; }	cnt[nr];  } && PERF_SAMPLE_GROUP
@@ -347,6 +366,9 @@
 	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
 	 * };
 	 */
+	PERF_EVENT_SAMPLE		= 9,
+
+	PERF_EVENT_MAX,			/* non-ABI */
 };
 
 enum perf_callchain_context {
@@ -582,6 +604,7 @@
 	int				nr_counters;
 	int				nr_active;
 	int				is_active;
+	int				nr_stat;
 	atomic_t			refcount;
 	struct task_struct		*task;
 
@@ -669,7 +692,16 @@
 		(counter->attr.type != PERF_TYPE_HW_CACHE);
 }
 
-extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64);
+
+static inline void
+perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+{
+	if (atomic_read(&perf_swcounter_enabled[event]))
+		__perf_swcounter_event(event, nr, nmi, regs, addr);
+}
 
 extern void __perf_counter_mmap(struct vm_area_struct *vma);
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4d07542..0085d75 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -349,8 +349,20 @@
 struct nsproxy;
 struct user_namespace;
 
-/* Maximum number of active map areas.. This is a random (large) number */
-#define DEFAULT_MAX_MAP_COUNT	65536
+/*
+ * Default maximum number of active map areas, this limits the number of vmas
+ * per mm struct. Users can overwrite this number by sysctl but there is a
+ * problem.
+ *
+ * When a program's coredump is generated as ELF format, a section is created
+ * per a vma. In ELF, the number of sections is represented in unsigned short.
+ * This means the number of sections should be smaller than 65535 at coredump.
+ * Because the kernel adds some informative sections to a image of program at
+ * generating coredump, we need some margin. The number of extra sections is
+ * 1-3 now and depends on arch. We use "5" as safe margin, here.
+ */
+#define MAPCOUNT_ELF_CORE_MARGIN	(5)
+#define DEFAULT_MAX_MAP_COUNT	(USHORT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
 
 extern int sysctl_max_map_count;
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 9c4cd27..c47c4b4 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -80,6 +80,8 @@
 #define	SPI_LSB_FIRST	0x08			/* per-word bits-on-wire */
 #define	SPI_3WIRE	0x10			/* SI/SO signals shared */
 #define	SPI_LOOP	0x20			/* loopback mode */
+#define	SPI_NO_CS	0x40			/* 1 dev/bus, no chipselect */
+#define	SPI_READY	0x80			/* slave pulls low to pause */
 	u8			bits_per_word;
 	int			irq;
 	void			*controller_state;
@@ -248,6 +250,10 @@
 	/* spi_device.mode flags understood by this controller driver */
 	u16			mode_bits;
 
+	/* other constraints relevant to this driver */
+	u16			flags;
+#define SPI_MASTER_HALF_DUPLEX	BIT(0)		/* can't do full duplex */
+
 	/* Setup mode and clock, etc (spi driver may call many times).
 	 *
 	 * IMPORTANT:  this may be called when transfers to another
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index 95251cc..bf0570a 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -40,6 +40,8 @@
 #define SPI_LSB_FIRST		0x08
 #define SPI_3WIRE		0x10
 #define SPI_LOOP		0x20
+#define SPI_NO_CS		0x40
+#define SPI_READY		0x80
 
 /*---------------------------------------------------------------------------*/
 
diff --git a/include/linux/timer.h b/include/linux/timer.h
index ccf882e..be62ec2 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -190,6 +190,8 @@
  */
 #ifdef CONFIG_TIMER_STATS
 
+extern int timer_stats_active;
+
 #define TIMER_STATS_FLAG_DEFERRABLE	0x1
 
 extern void init_timer_stats(void);
@@ -203,6 +205,8 @@
 
 static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
 {
+	if (likely(!timer_stats_active))
+		return;
 	__timer_stats_timer_set_start_info(timer, __builtin_return_address(0));
 }
 
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 5d44059..310e18a 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -42,7 +42,6 @@
 
 	/* protocol/interface state */
 	struct net_device	*net;
-	struct net_device_stats	stats;
 	int			msg_enable;
 	unsigned long		data [5];
 	u32			xid;
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index a632689..cbdd628 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -258,8 +258,8 @@
 /* Update TCP window tracking data when NAT mangles the packet */
 extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
 				    unsigned int dataoff,
-				    struct nf_conn *ct,
-				    int dir);
+				    struct nf_conn *ct, int dir,
+				    s16 offset);
 
 /* Fake conntrack entry for untracked connections */
 extern struct nf_conn nf_conntrack_untracked;
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 5054dc5..29d1267 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -45,6 +45,7 @@
 int phonet_address_del(struct net_device *dev, u8 addr);
 u8 phonet_address_get(struct net_device *dev, u8 addr);
 int phonet_address_lookup(struct net *net, u8 addr);
+void phonet_address_notify(int event, struct net_device *dev, u8 addr);
 
 #define PN_NO_ADDR	0xff
 
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index e35ba2c..c5e68ad 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -32,6 +32,7 @@
 #include <linux/nsproxy.h>
 #include <linux/pid.h>
 #include <linux/ipc_namespace.h>
+#include <linux/ima.h>
 
 #include <net/sock.h>
 #include "util.h"
@@ -733,6 +734,7 @@
 		error = PTR_ERR(filp);
 		goto out_putfd;
 	}
+	ima_counts_get(filp);
 
 	fd_install(fd, filp);
 	goto out_upsem;
diff --git a/kernel/Makefile b/kernel/Makefile
index 780c8dc..2093a69 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -96,6 +96,7 @@
 obj-$(CONFIG_FUNCTION_TRACER) += trace/
 obj-$(CONFIG_TRACING) += trace/
 obj-$(CONFIG_X86_DS) += trace/
+obj-$(CONFIG_RING_BUFFER) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
 obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o
diff --git a/kernel/acct.c b/kernel/acct.c
index 7afa315..9f33910 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -215,6 +215,7 @@
 static int acct_on(char *name)
 {
 	struct file *file;
+	struct vfsmount *mnt;
 	int error;
 	struct pid_namespace *ns;
 	struct bsd_acct_struct *acct = NULL;
@@ -256,11 +257,12 @@
 		acct = NULL;
 	}
 
-	mnt_pin(file->f_path.mnt);
+	mnt = file->f_path.mnt;
+	mnt_pin(mnt);
 	acct_file_reopen(ns->bacct, file, ns);
 	spin_unlock(&acct_lock);
 
-	mntput(file->f_path.mnt); /* it's pinned, now give up active reference */
+	mntput(mnt); /* it's pinned, now give up active reference */
 	kfree(acct);
 
 	return 0;
diff --git a/kernel/futex.c b/kernel/futex.c
index 1c33711..794c862 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -299,7 +299,7 @@
 static int fault_in_user_writeable(u32 __user *uaddr)
 {
 	int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
-				 sizeof(*uaddr), 1, 0, NULL, NULL);
+				 1, 1, 0, NULL, NULL);
 	return ret < 0 ? ret : 0;
 }
 
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 1a933a2..d55a50d 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -236,6 +236,8 @@
 
 	list_add_rcu(&counter->event_entry, &ctx->event_list);
 	ctx->nr_counters++;
+	if (counter->attr.inherit_stat)
+		ctx->nr_stat++;
 }
 
 /*
@@ -250,6 +252,8 @@
 	if (list_empty(&counter->list_entry))
 		return;
 	ctx->nr_counters--;
+	if (counter->attr.inherit_stat)
+		ctx->nr_stat--;
 
 	list_del_init(&counter->list_entry);
 	list_del_rcu(&counter->event_entry);
@@ -1006,6 +1010,81 @@
 		&& !ctx1->pin_count && !ctx2->pin_count;
 }
 
+static void __perf_counter_read(void *counter);
+
+static void __perf_counter_sync_stat(struct perf_counter *counter,
+				     struct perf_counter *next_counter)
+{
+	u64 value;
+
+	if (!counter->attr.inherit_stat)
+		return;
+
+	/*
+	 * Update the counter value, we cannot use perf_counter_read()
+	 * because we're in the middle of a context switch and have IRQs
+	 * disabled, which upsets smp_call_function_single(), however
+	 * we know the counter must be on the current CPU, therefore we
+	 * don't need to use it.
+	 */
+	switch (counter->state) {
+	case PERF_COUNTER_STATE_ACTIVE:
+		__perf_counter_read(counter);
+		break;
+
+	case PERF_COUNTER_STATE_INACTIVE:
+		update_counter_times(counter);
+		break;
+
+	default:
+		break;
+	}
+
+	/*
+	 * In order to keep per-task stats reliable we need to flip the counter
+	 * values when we flip the contexts.
+	 */
+	value = atomic64_read(&next_counter->count);
+	value = atomic64_xchg(&counter->count, value);
+	atomic64_set(&next_counter->count, value);
+
+	swap(counter->total_time_enabled, next_counter->total_time_enabled);
+	swap(counter->total_time_running, next_counter->total_time_running);
+
+	/*
+	 * Since we swizzled the values, update the user visible data too.
+	 */
+	perf_counter_update_userpage(counter);
+	perf_counter_update_userpage(next_counter);
+}
+
+#define list_next_entry(pos, member) \
+	list_entry(pos->member.next, typeof(*pos), member)
+
+static void perf_counter_sync_stat(struct perf_counter_context *ctx,
+				   struct perf_counter_context *next_ctx)
+{
+	struct perf_counter *counter, *next_counter;
+
+	if (!ctx->nr_stat)
+		return;
+
+	counter = list_first_entry(&ctx->event_list,
+				   struct perf_counter, event_entry);
+
+	next_counter = list_first_entry(&next_ctx->event_list,
+					struct perf_counter, event_entry);
+
+	while (&counter->event_entry != &ctx->event_list &&
+	       &next_counter->event_entry != &next_ctx->event_list) {
+
+		__perf_counter_sync_stat(counter, next_counter);
+
+		counter = list_next_entry(counter, event_entry);
+		next_counter = list_next_entry(counter, event_entry);
+	}
+}
+
 /*
  * Called from scheduler to remove the counters of the current task,
  * with interrupts disabled.
@@ -1061,6 +1140,8 @@
 			ctx->task = next;
 			next_ctx->task = task;
 			do_switch = 0;
+
+			perf_counter_sync_stat(ctx, next_ctx);
 		}
 		spin_unlock(&next_ctx->lock);
 		spin_unlock(&ctx->lock);
@@ -1348,9 +1429,56 @@
 }
 
 /*
+ * Enable all of a task's counters that have been marked enable-on-exec.
+ * This expects task == current.
+ */
+static void perf_counter_enable_on_exec(struct task_struct *task)
+{
+	struct perf_counter_context *ctx;
+	struct perf_counter *counter;
+	unsigned long flags;
+	int enabled = 0;
+
+	local_irq_save(flags);
+	ctx = task->perf_counter_ctxp;
+	if (!ctx || !ctx->nr_counters)
+		goto out;
+
+	__perf_counter_task_sched_out(ctx);
+
+	spin_lock(&ctx->lock);
+
+	list_for_each_entry(counter, &ctx->counter_list, list_entry) {
+		if (!counter->attr.enable_on_exec)
+			continue;
+		counter->attr.enable_on_exec = 0;
+		if (counter->state >= PERF_COUNTER_STATE_INACTIVE)
+			continue;
+		counter->state = PERF_COUNTER_STATE_INACTIVE;
+		counter->tstamp_enabled =
+			ctx->time - counter->total_time_enabled;
+		enabled = 1;
+	}
+
+	/*
+	 * Unclone this context if we enabled any counter.
+	 */
+	if (enabled && ctx->parent_ctx) {
+		put_ctx(ctx->parent_ctx);
+		ctx->parent_ctx = NULL;
+	}
+
+	spin_unlock(&ctx->lock);
+
+	perf_counter_task_sched_in(task, smp_processor_id());
+ out:
+	local_irq_restore(flags);
+}
+
+/*
  * Cross CPU call to read the hardware counter
  */
-static void __read(void *info)
+static void __perf_counter_read(void *info)
 {
 	struct perf_counter *counter = info;
 	struct perf_counter_context *ctx = counter->ctx;
@@ -1372,7 +1500,7 @@
 	 */
 	if (counter->state == PERF_COUNTER_STATE_ACTIVE) {
 		smp_call_function_single(counter->oncpu,
-					 __read, counter, 1);
+					 __perf_counter_read, counter, 1);
 	} else if (counter->state == PERF_COUNTER_STATE_INACTIVE) {
 		update_counter_times(counter);
 	}
@@ -1508,11 +1636,13 @@
 {
 	perf_pending_sync(counter);
 
-	atomic_dec(&nr_counters);
-	if (counter->attr.mmap)
-		atomic_dec(&nr_mmap_counters);
-	if (counter->attr.comm)
-		atomic_dec(&nr_comm_counters);
+	if (!counter->parent) {
+		atomic_dec(&nr_counters);
+		if (counter->attr.mmap)
+			atomic_dec(&nr_mmap_counters);
+		if (counter->attr.comm)
+			atomic_dec(&nr_comm_counters);
+	}
 
 	if (counter->destroy)
 		counter->destroy(counter);
@@ -1751,6 +1881,14 @@
 	return 0;
 }
 
+static int perf_counter_index(struct perf_counter *counter)
+{
+	if (counter->state != PERF_COUNTER_STATE_ACTIVE)
+		return 0;
+
+	return counter->hw.idx + 1 - PERF_COUNTER_INDEX_OFFSET;
+}
+
 /*
  * Callers need to ensure there can be no nesting of this function, otherwise
  * the seqlock logic goes bad. We can not serialize this because the arch
@@ -1775,11 +1913,17 @@
 	preempt_disable();
 	++userpg->lock;
 	barrier();
-	userpg->index = counter->hw.idx;
+	userpg->index = perf_counter_index(counter);
 	userpg->offset = atomic64_read(&counter->count);
 	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
 		userpg->offset -= atomic64_read(&counter->hw.prev_count);
 
+	userpg->time_enabled = counter->total_time_enabled +
+			atomic64_read(&counter->child_total_time_enabled);
+
+	userpg->time_running = counter->total_time_running +
+			atomic64_read(&counter->child_total_time_running);
+
 	barrier();
 	++userpg->lock;
 	preempt_enable();
@@ -2483,15 +2627,14 @@
 		u32 cpu, reserved;
 	} cpu_entry;
 
-	header.type = 0;
+	header.type = PERF_EVENT_SAMPLE;
 	header.size = sizeof(header);
 
-	header.misc = PERF_EVENT_MISC_OVERFLOW;
+	header.misc = 0;
 	header.misc |= perf_misc_flags(data->regs);
 
 	if (sample_type & PERF_SAMPLE_IP) {
 		ip = perf_instruction_pointer(data->regs);
-		header.type |= PERF_SAMPLE_IP;
 		header.size += sizeof(ip);
 	}
 
@@ -2500,7 +2643,6 @@
 		tid_entry.pid = perf_counter_pid(counter, current);
 		tid_entry.tid = perf_counter_tid(counter, current);
 
-		header.type |= PERF_SAMPLE_TID;
 		header.size += sizeof(tid_entry);
 	}
 
@@ -2510,34 +2652,25 @@
 		 */
 		time = sched_clock();
 
-		header.type |= PERF_SAMPLE_TIME;
 		header.size += sizeof(u64);
 	}
 
-	if (sample_type & PERF_SAMPLE_ADDR) {
-		header.type |= PERF_SAMPLE_ADDR;
+	if (sample_type & PERF_SAMPLE_ADDR)
 		header.size += sizeof(u64);
-	}
 
-	if (sample_type & PERF_SAMPLE_ID) {
-		header.type |= PERF_SAMPLE_ID;
+	if (sample_type & PERF_SAMPLE_ID)
 		header.size += sizeof(u64);
-	}
 
 	if (sample_type & PERF_SAMPLE_CPU) {
-		header.type |= PERF_SAMPLE_CPU;
 		header.size += sizeof(cpu_entry);
 
 		cpu_entry.cpu = raw_smp_processor_id();
 	}
 
-	if (sample_type & PERF_SAMPLE_PERIOD) {
-		header.type |= PERF_SAMPLE_PERIOD;
+	if (sample_type & PERF_SAMPLE_PERIOD)
 		header.size += sizeof(u64);
-	}
 
 	if (sample_type & PERF_SAMPLE_GROUP) {
-		header.type |= PERF_SAMPLE_GROUP;
 		header.size += sizeof(u64) +
 			counter->nr_siblings * sizeof(group_entry);
 	}
@@ -2547,10 +2680,9 @@
 
 		if (callchain) {
 			callchain_size = (1 + callchain->nr) * sizeof(u64);
-
-			header.type |= PERF_SAMPLE_CALLCHAIN;
 			header.size += callchain_size;
-		}
+		} else
+			header.size += sizeof(u64);
 	}
 
 	ret = perf_output_begin(&handle, counter, header.size, nmi, 1);
@@ -2601,13 +2733,79 @@
 		}
 	}
 
-	if (callchain)
-		perf_output_copy(&handle, callchain, callchain_size);
+	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
+		if (callchain)
+			perf_output_copy(&handle, callchain, callchain_size);
+		else {
+			u64 nr = 0;
+			perf_output_put(&handle, nr);
+		}
+	}
 
 	perf_output_end(&handle);
 }
 
 /*
+ * read event
+ */
+
+struct perf_read_event {
+	struct perf_event_header	header;
+
+	u32				pid;
+	u32				tid;
+	u64				value;
+	u64				format[3];
+};
+
+static void
+perf_counter_read_event(struct perf_counter *counter,
+			struct task_struct *task)
+{
+	struct perf_output_handle handle;
+	struct perf_read_event event = {
+		.header = {
+			.type = PERF_EVENT_READ,
+			.misc = 0,
+			.size = sizeof(event) - sizeof(event.format),
+		},
+		.pid = perf_counter_pid(counter, task),
+		.tid = perf_counter_tid(counter, task),
+		.value = atomic64_read(&counter->count),
+	};
+	int ret, i = 0;
+
+	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
+		event.header.size += sizeof(u64);
+		event.format[i++] = counter->total_time_enabled;
+	}
+
+	if (counter->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
+		event.header.size += sizeof(u64);
+		event.format[i++] = counter->total_time_running;
+	}
+
+	if (counter->attr.read_format & PERF_FORMAT_ID) {
+		u64 id;
+
+		event.header.size += sizeof(u64);
+		if (counter->parent)
+			id = counter->parent->id;
+		else
+			id = counter->id;
+
+		event.format[i++] = id;
+	}
+
+	ret = perf_output_begin(&handle, counter, event.header.size, 0, 0);
+	if (ret)
+		return;
+
+	perf_output_copy(&handle, &event, event.header.size);
+	perf_output_end(&handle);
+}
+
+/*
  * fork tracking
  */
 
@@ -2798,6 +2996,9 @@
 {
 	struct perf_comm_event comm_event;
 
+	if (task->perf_counter_ctxp)
+		perf_counter_enable_on_exec(task);
+
 	if (!atomic_read(&nr_comm_counters))
 		return;
 
@@ -3317,8 +3518,8 @@
 	put_cpu_var(perf_cpu_context);
 }
 
-void
-perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+void __perf_swcounter_event(u32 event, u64 nr, int nmi,
+			    struct pt_regs *regs, u64 addr)
 {
 	struct perf_sample_data data = {
 		.regs = regs,
@@ -3509,9 +3710,21 @@
 }
 #endif
 
+atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX];
+
+static void sw_perf_counter_destroy(struct perf_counter *counter)
+{
+	u64 event = counter->attr.config;
+
+	WARN_ON(counter->parent);
+
+	atomic_dec(&perf_swcounter_enabled[event]);
+}
+
 static const struct pmu *sw_perf_counter_init(struct perf_counter *counter)
 {
 	const struct pmu *pmu = NULL;
+	u64 event = counter->attr.config;
 
 	/*
 	 * Software counters (currently) can't in general distinguish
@@ -3520,7 +3733,7 @@
 	 * to be kernel events, and page faults are never hypervisor
 	 * events.
 	 */
-	switch (counter->attr.config) {
+	switch (event) {
 	case PERF_COUNT_SW_CPU_CLOCK:
 		pmu = &perf_ops_cpu_clock;
 
@@ -3541,6 +3754,10 @@
 	case PERF_COUNT_SW_PAGE_FAULTS_MAJ:
 	case PERF_COUNT_SW_CONTEXT_SWITCHES:
 	case PERF_COUNT_SW_CPU_MIGRATIONS:
+		if (!counter->parent) {
+			atomic_inc(&perf_swcounter_enabled[event]);
+			counter->destroy = sw_perf_counter_destroy;
+		}
 		pmu = &perf_ops_generic;
 		break;
 	}
@@ -3556,6 +3773,7 @@
 		   int cpu,
 		   struct perf_counter_context *ctx,
 		   struct perf_counter *group_leader,
+		   struct perf_counter *parent_counter,
 		   gfp_t gfpflags)
 {
 	const struct pmu *pmu;
@@ -3591,6 +3809,8 @@
 	counter->ctx		= ctx;
 	counter->oncpu		= -1;
 
+	counter->parent		= parent_counter;
+
 	counter->ns		= get_pid_ns(current->nsproxy->pid_ns);
 	counter->id		= atomic64_inc_return(&perf_counter_id);
 
@@ -3648,11 +3868,13 @@
 
 	counter->pmu = pmu;
 
-	atomic_inc(&nr_counters);
-	if (counter->attr.mmap)
-		atomic_inc(&nr_mmap_counters);
-	if (counter->attr.comm)
-		atomic_inc(&nr_comm_counters);
+	if (!counter->parent) {
+		atomic_inc(&nr_counters);
+		if (counter->attr.mmap)
+			atomic_inc(&nr_mmap_counters);
+		if (counter->attr.comm)
+			atomic_inc(&nr_comm_counters);
+	}
 
 	return counter;
 }
@@ -3815,7 +4037,7 @@
 	}
 
 	counter = perf_counter_alloc(&attr, cpu, ctx, group_leader,
-				     GFP_KERNEL);
+				     NULL, GFP_KERNEL);
 	ret = PTR_ERR(counter);
 	if (IS_ERR(counter))
 		goto err_put_context;
@@ -3881,7 +4103,8 @@
 
 	child_counter = perf_counter_alloc(&parent_counter->attr,
 					   parent_counter->cpu, child_ctx,
-					   group_leader, GFP_KERNEL);
+					   group_leader, parent_counter,
+					   GFP_KERNEL);
 	if (IS_ERR(child_counter))
 		return child_counter;
 	get_ctx(child_ctx);
@@ -3904,12 +4127,6 @@
 	 */
 	add_counter_to_ctx(child_counter, child_ctx);
 
-	child_counter->parent = parent_counter;
-	/*
-	 * inherit into child's child as well:
-	 */
-	child_counter->attr.inherit = 1;
-
 	/*
 	 * Get a reference to the parent filp - we will fput it
 	 * when the child counter exits. This is safe to do because
@@ -3953,10 +4170,14 @@
 }
 
 static void sync_child_counter(struct perf_counter *child_counter,
-			       struct perf_counter *parent_counter)
+			       struct task_struct *child)
 {
+	struct perf_counter *parent_counter = child_counter->parent;
 	u64 child_val;
 
+	if (child_counter->attr.inherit_stat)
+		perf_counter_read_event(child_counter, child);
+
 	child_val = atomic64_read(&child_counter->count);
 
 	/*
@@ -3985,7 +4206,8 @@
 
 static void
 __perf_counter_exit_task(struct perf_counter *child_counter,
-			 struct perf_counter_context *child_ctx)
+			 struct perf_counter_context *child_ctx,
+			 struct task_struct *child)
 {
 	struct perf_counter *parent_counter;
 
@@ -3999,7 +4221,7 @@
 	 * counters need to be zapped - but otherwise linger.
 	 */
 	if (parent_counter) {
-		sync_child_counter(child_counter, parent_counter);
+		sync_child_counter(child_counter, child);
 		free_counter(child_counter);
 	}
 }
@@ -4061,7 +4283,7 @@
 again:
 	list_for_each_entry_safe(child_counter, tmp, &child_ctx->counter_list,
 				 list_entry)
-		__perf_counter_exit_task(child_counter, child_ctx);
+		__perf_counter_exit_task(child_counter, child_ctx, child);
 
 	/*
 	 * If the last counter was a group counter, it will have appended all
diff --git a/kernel/pid.c b/kernel/pid.c
index 31310b5..5fa1db4 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -36,6 +36,7 @@
 #include <linux/pid_namespace.h>
 #include <linux/init_task.h>
 #include <linux/syscalls.h>
+#include <linux/kmemleak.h>
 
 #define pid_hashfn(nr, ns)	\
 	hash_long((unsigned long)nr + (unsigned long)ns, pidhash_shift)
@@ -512,6 +513,12 @@
 	pid_hash = alloc_bootmem(pidhash_size *	sizeof(*(pid_hash)));
 	if (!pid_hash)
 		panic("Could not alloc pidhash!\n");
+	/*
+	 * pid_hash contains references to allocated struct pid objects and it
+	 * must be scanned by kmemleak to avoid false positives.
+	 */
+	kmemleak_alloc(pid_hash, pidhash_size *	sizeof(*(pid_hash)), 0,
+		       GFP_KERNEL);
 	for (i = 0; i < pidhash_size; i++)
 		INIT_HLIST_HEAD(&pid_hash[i]);
 }
diff --git a/kernel/resource.c b/kernel/resource.c
index ac5f3a3..78b0872 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -787,7 +787,7 @@
 	static struct resource reserve[MAXRESERVE];
 
 	for (;;) {
-		int io_start, io_num;
+		unsigned int io_start, io_num;
 		int x = reserved;
 
 		if (get_option (&str, &io_start) != 2)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 62e4ff9..98e0232 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -335,7 +335,10 @@
 		.data		= &sysctl_timer_migration,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &zero,
+		.extra2		= &one,
 	},
 #endif
 	{
@@ -744,6 +747,14 @@
 		.proc_handler	= &proc_dointvec,
 	},
 	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "panic_on_io_nmi",
+		.data		= &panic_on_io_nmi,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
+	{
 		.ctl_name	= KERN_BOOTLOADER_TYPE,
 		.procname	= "bootloader_type",
 		.data		= &bootloader_type,
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index c994530..4cde8b9 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -96,7 +96,7 @@
 /*
  * Collection status, active/inactive:
  */
-static int __read_mostly active;
+int __read_mostly timer_stats_active;
 
 /*
  * Beginning/end timestamps of measurement:
@@ -242,7 +242,7 @@
 	struct entry *entry, input;
 	unsigned long flags;
 
-	if (likely(!active))
+	if (likely(!timer_stats_active))
 		return;
 
 	lock = &per_cpu(lookup_lock, raw_smp_processor_id());
@@ -254,7 +254,7 @@
 	input.timer_flag = timer_flag;
 
 	spin_lock_irqsave(lock, flags);
-	if (!active)
+	if (!timer_stats_active)
 		goto out_unlock;
 
 	entry = tstat_lookup(&input, comm);
@@ -290,7 +290,7 @@
 	/*
 	 * If still active then calculate up to now:
 	 */
-	if (active)
+	if (timer_stats_active)
 		time_stop = ktime_get();
 
 	time = ktime_sub(time_stop, time_start);
@@ -368,18 +368,18 @@
 	mutex_lock(&show_mutex);
 	switch (ctl[0]) {
 	case '0':
-		if (active) {
-			active = 0;
+		if (timer_stats_active) {
+			timer_stats_active = 0;
 			time_stop = ktime_get();
 			sync_access();
 		}
 		break;
 	case '1':
-		if (!active) {
+		if (!timer_stats_active) {
 			reset_entries();
 			time_start = ktime_get();
 			smp_mb();
-			active = 1;
+			timer_stats_active = 1;
 		}
 		break;
 	default:
diff --git a/kernel/timer.c b/kernel/timer.c
index 54d3912..0b36b9e 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -380,6 +380,8 @@
 {
 	unsigned int flag = 0;
 
+	if (likely(!timer->start_site))
+		return;
 	if (unlikely(tbase_get_deferrable(timer->base)))
 		flag |= TIMER_STATS_FLAG_DEFERRABLE;
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 3718d55..f3716bf 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -291,7 +291,9 @@
 	pg = (struct ftrace_profile_page *)((unsigned long)rec & PAGE_MASK);
 
  again:
-	rec++;
+	if (idx != 0)
+		rec++;
+
 	if ((void *)rec >= (void *)&pg->records[pg->index]) {
 		pg = pg->next;
 		if (!pg)
@@ -1417,10 +1419,20 @@
 {
 	struct ftrace_iterator *iter = m->private;
 	void *p = NULL;
+	loff_t l;
+
+	if (!(iter->flags & FTRACE_ITER_HASH))
+		*pos = 0;
 
 	iter->flags |= FTRACE_ITER_HASH;
 
-	return t_hash_next(m, p, pos);
+	iter->hidx = 0;
+	for (l = 0; l <= *pos; ) {
+		p = t_hash_next(m, p, &l);
+		if (!p)
+			break;
+	}
+	return p;
 }
 
 static int t_hash_show(struct seq_file *m, void *v)
@@ -1467,8 +1479,6 @@
 			iter->pg = iter->pg->next;
 			iter->idx = 0;
 			goto retry;
-		} else {
-			iter->idx = -1;
 		}
 	} else {
 		rec = &iter->pg->records[iter->idx++];
@@ -1497,6 +1507,7 @@
 {
 	struct ftrace_iterator *iter = m->private;
 	void *p = NULL;
+	loff_t l;
 
 	mutex_lock(&ftrace_lock);
 	/*
@@ -1508,23 +1519,21 @@
 		if (*pos > 0)
 			return t_hash_start(m, pos);
 		iter->flags |= FTRACE_ITER_PRINTALL;
-		(*pos)++;
 		return iter;
 	}
 
 	if (iter->flags & FTRACE_ITER_HASH)
 		return t_hash_start(m, pos);
 
-	if (*pos > 0) {
-		if (iter->idx < 0)
-			return p;
-		(*pos)--;
-		iter->idx--;
+	iter->pg = ftrace_pages_start;
+	iter->idx = 0;
+	for (l = 0; l <= *pos; ) {
+		p = t_next(m, p, &l);
+		if (!p)
+			break;
 	}
 
-	p = t_next(m, p, pos);
-
-	if (!p)
+	if (!p && iter->flags & FTRACE_ITER_FILTER)
 		return t_hash_start(m, pos);
 
 	return p;
@@ -2500,32 +2509,31 @@
 unsigned long ftrace_graph_funcs[FTRACE_GRAPH_MAX_FUNCS] __read_mostly;
 
 static void *
-g_next(struct seq_file *m, void *v, loff_t *pos)
+__g_next(struct seq_file *m, loff_t *pos)
 {
 	unsigned long *array = m->private;
-	int index = *pos;
 
-	(*pos)++;
-
-	if (index >= ftrace_graph_count)
+	if (*pos >= ftrace_graph_count)
 		return NULL;
+	return &array[*pos];
+}
 
-	return &array[index];
+static void *
+g_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return __g_next(m, pos);
 }
 
 static void *g_start(struct seq_file *m, loff_t *pos)
 {
-	void *p = NULL;
-
 	mutex_lock(&graph_lock);
 
 	/* Nothing, tell g_show to print all functions are enabled */
 	if (!ftrace_graph_count && !*pos)
 		return (void *)1;
 
-	p = g_next(m, p, pos);
-
-	return p;
+	return __g_next(m, pos);
 }
 
 static void g_stop(struct seq_file *m, void *p)
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 04dac26..bf27bb7 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1563,6 +1563,8 @@
 	return NULL;
 }
 
+#ifdef CONFIG_TRACING
+
 #define TRACE_RECURSIVE_DEPTH 16
 
 static int trace_recursive_lock(void)
@@ -1593,6 +1595,13 @@
 	current->trace_recursion--;
 }
 
+#else
+
+#define trace_recursive_lock()		(0)
+#define trace_recursive_unlock()	do { } while (0)
+
+#endif
+
 static DEFINE_PER_CPU(int, rb_need_resched);
 
 /**
@@ -3104,6 +3113,7 @@
 }
 EXPORT_SYMBOL_GPL(ring_buffer_read_page);
 
+#ifdef CONFIG_TRACING
 static ssize_t
 rb_simple_read(struct file *filp, char __user *ubuf,
 	       size_t cnt, loff_t *ppos)
@@ -3171,6 +3181,7 @@
 }
 
 fs_initcall(rb_init_debugfs);
+#endif
 
 #ifdef CONFIG_HOTPLUG_CPU
 static int rb_cpu_notify(struct notifier_block *self,
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 076fa6f..3aa0a0d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -284,13 +284,12 @@
 static int __init set_buf_size(char *str)
 {
 	unsigned long buf_size;
-	int ret;
 
 	if (!str)
 		return 0;
-	ret = strict_strtoul(str, 0, &buf_size);
+	buf_size = memparse(str, &str);
 	/* nr_entries can not be zero */
-	if (ret < 0 || buf_size == 0)
+	if (buf_size == 0)
 		return 0;
 	trace_buf_size = buf_size;
 	return 1;
@@ -2053,25 +2052,23 @@
 static void *
 t_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	struct tracer *t = m->private;
+	struct tracer *t = v;
 
 	(*pos)++;
 
 	if (t)
 		t = t->next;
 
-	m->private = t;
-
 	return t;
 }
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
-	struct tracer *t = m->private;
+	struct tracer *t;
 	loff_t l = 0;
 
 	mutex_lock(&trace_types_lock);
-	for (; t && l < *pos; t = t_next(m, t, &l))
+	for (t = trace_types; t && l < *pos; t = t_next(m, t, &l))
 		;
 
 	return t;
@@ -2107,18 +2104,10 @@
 
 static int show_traces_open(struct inode *inode, struct file *file)
 {
-	int ret;
-
 	if (tracing_disabled)
 		return -ENODEV;
 
-	ret = seq_open(file, &show_traces_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = trace_types;
-	}
-
-	return ret;
+	return seq_open(file, &show_traces_seq_ops);
 }
 
 static ssize_t
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 6e735d4..3548ae5 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -597,6 +597,7 @@
 
 extern struct pid *ftrace_pid_trace;
 
+#ifdef CONFIG_FUNCTION_TRACER
 static inline int ftrace_trace_task(struct task_struct *task)
 {
 	if (!ftrace_pid_trace)
@@ -604,6 +605,12 @@
 
 	return test_tsk_trace_trace(task);
 }
+#else
+static inline int ftrace_trace_task(struct task_struct *task)
+{
+	return 1;
+}
+#endif
 
 /*
  * trace_iterator_flags is an enumeration that defines bit
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index aa08be6..53c8fd3 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -300,10 +300,18 @@
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
+	struct ftrace_event_call *call = NULL;
+	loff_t l;
+
 	mutex_lock(&event_mutex);
-	if (*pos == 0)
-		m->private = ftrace_events.next;
-	return t_next(m, NULL, pos);
+
+	m->private = ftrace_events.next;
+	for (l = 0; l <= *pos; ) {
+		call = t_next(m, NULL, &l);
+		if (!call)
+			break;
+	}
+	return call;
 }
 
 static void *
@@ -332,10 +340,18 @@
 
 static void *s_start(struct seq_file *m, loff_t *pos)
 {
+	struct ftrace_event_call *call = NULL;
+	loff_t l;
+
 	mutex_lock(&event_mutex);
-	if (*pos == 0)
-		m->private = ftrace_events.next;
-	return s_next(m, NULL, pos);
+
+	m->private = ftrace_events.next;
+	for (l = 0; l <= *pos; ) {
+		call = s_next(m, NULL, &l);
+		if (!call)
+			break;
+	}
+	return call;
 }
 
 static int t_show(struct seq_file *m, void *v)
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 90f1347..7402144 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -302,8 +302,7 @@
 	if (count == -1)
 		seq_printf(m, ":unlimited\n");
 	else
-		seq_printf(m, ":count=%ld", count);
-	seq_putc(m, '\n');
+		seq_printf(m, ":count=%ld\n", count);
 
 	return 0;
 }
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index 9bece96..7b62781 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -155,25 +155,19 @@
 EXPORT_SYMBOL_GPL(__ftrace_vprintk);
 
 static void *
-t_next(struct seq_file *m, void *v, loff_t *pos)
+t_start(struct seq_file *m, loff_t *pos)
 {
-	const char **fmt = m->private;
-	const char **next = fmt;
-
-	(*pos)++;
+	const char **fmt = __start___trace_bprintk_fmt + *pos;
 
 	if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
 		return NULL;
-
-	next = fmt;
-	m->private = ++next;
-
 	return fmt;
 }
 
-static void *t_start(struct seq_file *m, loff_t *pos)
+static void *t_next(struct seq_file *m, void * v, loff_t *pos)
 {
-	return t_next(m, NULL, pos);
+	(*pos)++;
+	return t_start(m, pos);
 }
 
 static int t_show(struct seq_file *m, void *v)
@@ -224,15 +218,7 @@
 static int
 ftrace_formats_open(struct inode *inode, struct file *file)
 {
-	int ret;
-
-	ret = seq_open(file, &show_format_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-
-		m->private = __start___trace_bprintk_fmt;
-	}
-	return ret;
+	return seq_open(file, &show_format_seq_ops);
 }
 
 static const struct file_operations ftrace_formats_fops = {
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index c006437..e66f5e4 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -199,17 +199,13 @@
 	mutex_lock(&session->stat_mutex);
 
 	/* If we are in the beginning of the file, print the headers */
-	if (!*pos && session->ts->stat_headers) {
-		(*pos)++;
+	if (!*pos && session->ts->stat_headers)
 		return SEQ_START_TOKEN;
-	}
 
 	node = rb_first(&session->stat_root);
 	for (i = 0; node && i < *pos; i++)
 		node = rb_next(node);
 
-	(*pos)++;
-
 	return node;
 }
 
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c32b1a..12327b2 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -359,6 +359,18 @@
 	  In order to access the kmemleak file, debugfs needs to be
 	  mounted (usually at /sys/kernel/debug).
 
+config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
+	int "Maximum kmemleak early log entries"
+	depends on DEBUG_KMEMLEAK
+	range 200 2000
+	default 400
+	help
+	  Kmemleak must track all the memory allocations to avoid
+	  reporting false positives. Since memory may be allocated or
+	  freed before kmemleak is initialised, an early log buffer is
+	  used to store these actions. If kmemleak reports "early log
+	  buffer exceeded", please increase this value.
+
 config DEBUG_KMEMLEAK_TEST
 	tristate "Simple test for the kernel memory leak detector"
 	depends on DEBUG_KMEMLEAK
diff --git a/mm/dmapool.c b/mm/dmapool.c
index b1f0885..3df0637 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -86,10 +86,12 @@
 		unsigned pages = 0;
 		unsigned blocks = 0;
 
+		spin_lock_irq(&pool->lock);
 		list_for_each_entry(page, &pool->page_list, page_list) {
 			pages++;
 			blocks += page->in_use;
 		}
+		spin_unlock_irq(&pool->lock);
 
 		/* per-pool info, no real statistics yet */
 		temp = scnprintf(next, size, "%-16s %4u %4Zu %4Zu %2u\n",
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index c96f2c8..e766e1d 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -48,10 +48,10 @@
  *   scanned. This list is only modified during a scanning episode when the
  *   scan_mutex is held. At the end of a scan, the gray_list is always empty.
  *   Note that the kmemleak_object.use_count is incremented when an object is
- *   added to the gray_list and therefore cannot be freed
- * - kmemleak_mutex (mutex): prevents multiple users of the "kmemleak" debugfs
- *   file together with modifications to the memory scanning parameters
- *   including the scan_thread pointer
+ *   added to the gray_list and therefore cannot be freed. This mutex also
+ *   prevents multiple users of the "kmemleak" debugfs file together with
+ *   modifications to the memory scanning parameters including the scan_thread
+ *   pointer
  *
  * The kmemleak_object structures have a use_count incremented or decremented
  * using the get_object()/put_object() functions. When the use_count becomes
@@ -105,7 +105,6 @@
 #define MAX_TRACE		16	/* stack trace length */
 #define REPORTS_NR		50	/* maximum number of reported leaks */
 #define MSECS_MIN_AGE		5000	/* minimum object age for reporting */
-#define MSECS_SCAN_YIELD	10	/* CPU yielding period */
 #define SECS_FIRST_SCAN		60	/* delay before the first scan */
 #define SECS_SCAN_WAIT		600	/* subsequent auto scanning delay */
 
@@ -186,19 +185,16 @@
 static unsigned long min_addr = ULONG_MAX;
 static unsigned long max_addr;
 
-/* used for yielding the CPU to other tasks during scanning */
-static unsigned long next_scan_yield;
 static struct task_struct *scan_thread;
-static unsigned long jiffies_scan_yield;
+/* used to avoid reporting of recently allocated objects */
 static unsigned long jiffies_min_age;
+static unsigned long jiffies_last_scan;
 /* delay between automatic memory scannings */
 static signed long jiffies_scan_wait;
 /* enables or disables the task stacks scanning */
-static int kmemleak_stack_scan;
-/* mutex protecting the memory scanning */
+static int kmemleak_stack_scan = 1;
+/* protects the memory scanning, parameters and debug/kmemleak file access */
 static DEFINE_MUTEX(scan_mutex);
-/* mutex protecting the access to the /sys/kernel/debug/kmemleak file */
-static DEFINE_MUTEX(kmemleak_mutex);
 
 /* number of leaks reported (for limitation purposes) */
 static int reported_leaks;
@@ -235,7 +231,7 @@
 };
 
 /* early logging buffer and current position */
-static struct early_log early_log[200];
+static struct early_log early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE];
 static int crt_early_log;
 
 static void kmemleak_disable(void);
@@ -279,15 +275,6 @@
 }
 
 /*
- * Objects are considered referenced if their color is gray and they have not
- * been deleted.
- */
-static int referenced_object(struct kmemleak_object *object)
-{
-	return (object->flags & OBJECT_ALLOCATED) && color_gray(object);
-}
-
-/*
  * Objects are considered unreferenced only if their color is white, they have
  * not be deleted and have a minimum age to avoid false positives caused by
  * pointers temporarily stored in CPU registers.
@@ -295,42 +282,28 @@
 static int unreferenced_object(struct kmemleak_object *object)
 {
 	return (object->flags & OBJECT_ALLOCATED) && color_white(object) &&
-		time_is_before_eq_jiffies(object->jiffies + jiffies_min_age);
+		time_before_eq(object->jiffies + jiffies_min_age,
+			       jiffies_last_scan);
 }
 
 /*
- * Printing of the (un)referenced objects information, either to the seq file
- * or to the kernel log. The print_referenced/print_unreferenced functions
- * must be called with the object->lock held.
+ * Printing of the unreferenced objects information to the seq file. The
+ * print_unreferenced function must be called with the object->lock held.
  */
-#define print_helper(seq, x...)	do {	\
-	struct seq_file *s = (seq);	\
-	if (s)				\
-		seq_printf(s, x);	\
-	else				\
-		pr_info(x);		\
-} while (0)
-
-static void print_referenced(struct kmemleak_object *object)
-{
-	pr_info("referenced object 0x%08lx (size %zu)\n",
-		object->pointer, object->size);
-}
-
 static void print_unreferenced(struct seq_file *seq,
 			       struct kmemleak_object *object)
 {
 	int i;
 
-	print_helper(seq, "unreferenced object 0x%08lx (size %zu):\n",
-		     object->pointer, object->size);
-	print_helper(seq, "  comm \"%s\", pid %d, jiffies %lu\n",
-		     object->comm, object->pid, object->jiffies);
-	print_helper(seq, "  backtrace:\n");
+	seq_printf(seq, "unreferenced object 0x%08lx (size %zu):\n",
+		   object->pointer, object->size);
+	seq_printf(seq, "  comm \"%s\", pid %d, jiffies %lu\n",
+		   object->comm, object->pid, object->jiffies);
+	seq_printf(seq, "  backtrace:\n");
 
 	for (i = 0; i < object->trace_len; i++) {
 		void *ptr = (void *)object->trace[i];
-		print_helper(seq, "    [<%p>] %pS\n", ptr, ptr);
+		seq_printf(seq, "    [<%p>] %pS\n", ptr, ptr);
 	}
 }
 
@@ -554,8 +527,10 @@
 	write_lock_irqsave(&kmemleak_lock, flags);
 	object = lookup_object(ptr, 0);
 	if (!object) {
+#ifdef DEBUG
 		kmemleak_warn("Freeing unknown object at 0x%08lx\n",
 			      ptr);
+#endif
 		write_unlock_irqrestore(&kmemleak_lock, flags);
 		return;
 	}
@@ -571,8 +546,6 @@
 	 * cannot be freed when it is being scanned.
 	 */
 	spin_lock_irqsave(&object->lock, flags);
-	if (object->flags & OBJECT_REPORTED)
-		print_referenced(object);
 	object->flags &= ~OBJECT_ALLOCATED;
 	spin_unlock_irqrestore(&object->lock, flags);
 	put_object(object);
@@ -696,7 +669,8 @@
 	struct early_log *log;
 
 	if (crt_early_log >= ARRAY_SIZE(early_log)) {
-		kmemleak_stop("Early log buffer exceeded\n");
+		pr_warning("Early log buffer exceeded\n");
+		kmemleak_disable();
 		return;
 	}
 
@@ -808,21 +782,6 @@
 EXPORT_SYMBOL(kmemleak_no_scan);
 
 /*
- * Yield the CPU so that other tasks get a chance to run.  The yielding is
- * rate-limited to avoid excessive number of calls to the schedule() function
- * during memory scanning.
- */
-static void scan_yield(void)
-{
-	might_sleep();
-
-	if (time_is_before_eq_jiffies(next_scan_yield)) {
-		schedule();
-		next_scan_yield = jiffies + jiffies_scan_yield;
-	}
-}
-
-/*
  * Memory scanning is a long process and it needs to be interruptable. This
  * function checks whether such interrupt condition occured.
  */
@@ -862,15 +821,6 @@
 		if (scan_should_stop())
 			break;
 
-		/*
-		 * When scanning a memory block with a corresponding
-		 * kmemleak_object, the CPU yielding is handled in the calling
-		 * code since it holds the object->lock to avoid the block
-		 * freeing.
-		 */
-		if (!scanned)
-			scan_yield();
-
 		object = find_and_get_object(pointer, 1);
 		if (!object)
 			continue;
@@ -952,6 +902,9 @@
 	struct kmemleak_object *object, *tmp;
 	struct task_struct *task;
 	int i;
+	int new_leaks = 0;
+
+	jiffies_last_scan = jiffies;
 
 	/* prepare the kmemleak_object's */
 	rcu_read_lock();
@@ -1033,7 +986,7 @@
 	 */
 	object = list_entry(gray_list.next, typeof(*object), gray_list);
 	while (&object->gray_list != &gray_list) {
-		scan_yield();
+		cond_resched();
 
 		/* may add new objects to the list */
 		if (!scan_should_stop())
@@ -1049,6 +1002,32 @@
 		object = tmp;
 	}
 	WARN_ON(!list_empty(&gray_list));
+
+	/*
+	 * If scanning was stopped do not report any new unreferenced objects.
+	 */
+	if (scan_should_stop())
+		return;
+
+	/*
+	 * Scanning result reporting.
+	 */
+	rcu_read_lock();
+	list_for_each_entry_rcu(object, &object_list, object_list) {
+		spin_lock_irqsave(&object->lock, flags);
+		if (unreferenced_object(object) &&
+		    !(object->flags & OBJECT_REPORTED)) {
+			object->flags |= OBJECT_REPORTED;
+			new_leaks++;
+		}
+		spin_unlock_irqrestore(&object->lock, flags);
+	}
+	rcu_read_unlock();
+
+	if (new_leaks)
+		pr_info("%d new suspected memory leaks (see "
+			"/sys/kernel/debug/kmemleak)\n", new_leaks);
+
 }
 
 /*
@@ -1070,36 +1049,12 @@
 	}
 
 	while (!kthread_should_stop()) {
-		struct kmemleak_object *object;
 		signed long timeout = jiffies_scan_wait;
 
 		mutex_lock(&scan_mutex);
-
 		kmemleak_scan();
-		reported_leaks = 0;
-
-		rcu_read_lock();
-		list_for_each_entry_rcu(object, &object_list, object_list) {
-			unsigned long flags;
-
-			if (reported_leaks >= REPORTS_NR)
-				break;
-			spin_lock_irqsave(&object->lock, flags);
-			if (!(object->flags & OBJECT_REPORTED) &&
-			    unreferenced_object(object)) {
-				print_unreferenced(NULL, object);
-				object->flags |= OBJECT_REPORTED;
-				reported_leaks++;
-			} else if ((object->flags & OBJECT_REPORTED) &&
-				   referenced_object(object)) {
-				print_referenced(object);
-				object->flags &= ~OBJECT_REPORTED;
-			}
-			spin_unlock_irqrestore(&object->lock, flags);
-		}
-		rcu_read_unlock();
-
 		mutex_unlock(&scan_mutex);
+
 		/* wait before the next scan */
 		while (timeout && !kthread_should_stop())
 			timeout = schedule_timeout_interruptible(timeout);
@@ -1112,7 +1067,7 @@
 
 /*
  * Start the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
  */
 void start_scan_thread(void)
 {
@@ -1127,7 +1082,7 @@
 
 /*
  * Stop the automatic memory scanning thread. This function must be called
- * with the kmemleak_mutex held.
+ * with the scan_mutex held.
  */
 void stop_scan_thread(void)
 {
@@ -1147,10 +1102,8 @@
 	struct kmemleak_object *object;
 	loff_t n = *pos;
 
-	if (!n) {
-		kmemleak_scan();
+	if (!n)
 		reported_leaks = 0;
-	}
 	if (reported_leaks >= REPORTS_NR)
 		return NULL;
 
@@ -1211,11 +1164,10 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&object->lock, flags);
-	if (!unreferenced_object(object))
-		goto out;
-	print_unreferenced(seq, object);
-	reported_leaks++;
-out:
+	if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object)) {
+		print_unreferenced(seq, object);
+		reported_leaks++;
+	}
 	spin_unlock_irqrestore(&object->lock, flags);
 	return 0;
 }
@@ -1234,13 +1186,10 @@
 	if (!atomic_read(&kmemleak_enabled))
 		return -EBUSY;
 
-	ret = mutex_lock_interruptible(&kmemleak_mutex);
+	ret = mutex_lock_interruptible(&scan_mutex);
 	if (ret < 0)
 		goto out;
 	if (file->f_mode & FMODE_READ) {
-		ret = mutex_lock_interruptible(&scan_mutex);
-		if (ret < 0)
-			goto kmemleak_unlock;
 		ret = seq_open(file, &kmemleak_seq_ops);
 		if (ret < 0)
 			goto scan_unlock;
@@ -1249,8 +1198,6 @@
 
 scan_unlock:
 	mutex_unlock(&scan_mutex);
-kmemleak_unlock:
-	mutex_unlock(&kmemleak_mutex);
 out:
 	return ret;
 }
@@ -1259,11 +1206,9 @@
 {
 	int ret = 0;
 
-	if (file->f_mode & FMODE_READ) {
+	if (file->f_mode & FMODE_READ)
 		seq_release(inode, file);
-		mutex_unlock(&scan_mutex);
-	}
-	mutex_unlock(&kmemleak_mutex);
+	mutex_unlock(&scan_mutex);
 
 	return ret;
 }
@@ -1278,6 +1223,7 @@
  *   scan=off	- stop the automatic memory scanning thread
  *   scan=...	- set the automatic memory scanning period in seconds (0 to
  *		  disable it)
+ *   scan	- trigger a memory scan
  */
 static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
 			      size_t size, loff_t *ppos)
@@ -1315,7 +1261,9 @@
 			jiffies_scan_wait = msecs_to_jiffies(secs * 1000);
 			start_scan_thread();
 		}
-	} else
+	} else if (strncmp(buf, "scan", 4) == 0)
+		kmemleak_scan();
+	else
 		return -EINVAL;
 
 	/* ignore the rest of the buffer, only one command at a time */
@@ -1340,11 +1288,9 @@
 {
 	struct kmemleak_object *object;
 
-	mutex_lock(&kmemleak_mutex);
-	stop_scan_thread();
-	mutex_unlock(&kmemleak_mutex);
-
 	mutex_lock(&scan_mutex);
+	stop_scan_thread();
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(object, &object_list, object_list)
 		delete_object(object->pointer);
@@ -1411,7 +1357,6 @@
 	int i;
 	unsigned long flags;
 
-	jiffies_scan_yield = msecs_to_jiffies(MSECS_SCAN_YIELD);
 	jiffies_min_age = msecs_to_jiffies(MSECS_MIN_AGE);
 	jiffies_scan_wait = msecs_to_jiffies(SECS_SCAN_WAIT * 1000);
 
@@ -1486,9 +1431,9 @@
 				     &kmemleak_fops);
 	if (!dentry)
 		pr_warning("Failed to create the debugfs kmemleak file\n");
-	mutex_lock(&kmemleak_mutex);
+	mutex_lock(&scan_mutex);
 	start_scan_thread();
-	mutex_unlock(&kmemleak_mutex);
+	mutex_unlock(&scan_mutex);
 
 	pr_info("Kernel memory leak detector initialized\n");
 
diff --git a/mm/memory.c b/mm/memory.c
index f46ac18..6521619 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1207,8 +1207,8 @@
 
 
 int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, int flags,
-		struct page **pages, struct vm_area_struct **vmas)
+		     unsigned long start, int nr_pages, int flags,
+		     struct page **pages, struct vm_area_struct **vmas)
 {
 	int i;
 	unsigned int vm_flags = 0;
@@ -1217,7 +1217,7 @@
 	int ignore = !!(flags & GUP_FLAGS_IGNORE_VMA_PERMISSIONS);
 	int ignore_sigkill = !!(flags & GUP_FLAGS_IGNORE_SIGKILL);
 
-	if (len <= 0)
+	if (nr_pages <= 0)
 		return 0;
 	/* 
 	 * Require read or write permissions.
@@ -1269,7 +1269,7 @@
 				vmas[i] = gate_vma;
 			i++;
 			start += PAGE_SIZE;
-			len--;
+			nr_pages--;
 			continue;
 		}
 
@@ -1280,7 +1280,7 @@
 
 		if (is_vm_hugetlb_page(vma)) {
 			i = follow_hugetlb_page(mm, vma, pages, vmas,
-						&start, &len, i, write);
+						&start, &nr_pages, i, write);
 			continue;
 		}
 
@@ -1357,9 +1357,9 @@
 				vmas[i] = vma;
 			i++;
 			start += PAGE_SIZE;
-			len--;
-		} while (len && start < vma->vm_end);
-	} while (len);
+			nr_pages--;
+		} while (nr_pages && start < vma->vm_end);
+	} while (nr_pages);
 	return i;
 }
 
@@ -1368,7 +1368,7 @@
  * @tsk:	task_struct of target task
  * @mm:		mm_struct of target mm
  * @start:	starting user address
- * @len:	number of pages from start to pin
+ * @nr_pages:	number of pages from start to pin
  * @write:	whether pages will be written to by the caller
  * @force:	whether to force write access even if user mapping is
  *		readonly. This will result in the page being COWed even
@@ -1380,7 +1380,7 @@
  *		Or NULL if the caller does not require them.
  *
  * Returns number of pages pinned. This may be fewer than the number
- * requested. If len is 0 or negative, returns 0. If no pages
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
  * were pinned, returns -errno. Each page returned must be released
  * with a put_page() call when it is finished with. vmas will only
  * remain valid while mmap_sem is held.
@@ -1414,7 +1414,7 @@
  * See also get_user_pages_fast, for performance critical applications.
  */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		unsigned long start, int len, int write, int force,
+		unsigned long start, int nr_pages, int write, int force,
 		struct page **pages, struct vm_area_struct **vmas)
 {
 	int flags = 0;
@@ -1424,9 +1424,7 @@
 	if (force)
 		flags |= GUP_FLAGS_FORCE;
 
-	return __get_user_pages(tsk, mm,
-				start, len, flags,
-				pages, vmas);
+	return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
 }
 
 EXPORT_SYMBOL(get_user_pages);
diff --git a/mm/nommu.c b/mm/nommu.c
index 2fd2ad5..bf0cc76 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -173,8 +173,8 @@
 }
 
 int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, int flags,
-		struct page **pages, struct vm_area_struct **vmas)
+		     unsigned long start, int nr_pages, int flags,
+		     struct page **pages, struct vm_area_struct **vmas)
 {
 	struct vm_area_struct *vma;
 	unsigned long vm_flags;
@@ -189,7 +189,7 @@
 	vm_flags  = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
 	vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
 
-	for (i = 0; i < len; i++) {
+	for (i = 0; i < nr_pages; i++) {
 		vma = find_vma(mm, start);
 		if (!vma)
 			goto finish_or_fault;
@@ -224,7 +224,7 @@
  * - don't permit access to VMAs that don't support it, such as I/O mappings
  */
 int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-	unsigned long start, int len, int write, int force,
+	unsigned long start, int nr_pages, int write, int force,
 	struct page **pages, struct vm_area_struct **vmas)
 {
 	int flags = 0;
@@ -234,9 +234,7 @@
 	if (force)
 		flags |= GUP_FLAGS_FORCE;
 
-	return __get_user_pages(tsk, mm,
-				start, len, flags,
-				pages, vmas);
+	return __get_user_pages(tsk, mm, start, nr_pages, flags, pages, vmas);
 }
 EXPORT_SYMBOL(get_user_pages);
 
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7b0dcea..7687879 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -541,8 +541,11 @@
 		 * filesystems (i.e. NFS) in which data may have been
 		 * written to the server's write cache, but has not yet
 		 * been flushed to permanent storage.
+		 * Only move pages to writeback if this bdi is over its
+		 * threshold otherwise wait until the disk writes catch
+		 * up.
 		 */
-		if (bdi_nr_reclaimable) {
+		if (bdi_nr_reclaimable > bdi_thresh) {
 			writeback_inodes(&wbc);
 			pages_written += write_chunk - wbc.nr_to_write;
 			get_dirty_limits(&background_thresh, &dirty_thresh,
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5d714f8..e0f2cdf 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4032,6 +4032,8 @@
 	int i, nid;
 	unsigned long usable_startpfn;
 	unsigned long kernelcore_node, kernelcore_remaining;
+	/* save the state before borrow the nodemask */
+	nodemask_t saved_node_state = node_states[N_HIGH_MEMORY];
 	unsigned long totalpages = early_calculate_totalpages();
 	int usable_nodes = nodes_weight(node_states[N_HIGH_MEMORY]);
 
@@ -4059,7 +4061,7 @@
 
 	/* If kernelcore was not specified, there is no ZONE_MOVABLE */
 	if (!required_kernelcore)
-		return;
+		goto out;
 
 	/* usable_startpfn is the lowest possible pfn ZONE_MOVABLE can be at */
 	find_usable_zone_for_movable();
@@ -4158,6 +4160,10 @@
 	for (nid = 0; nid < MAX_NUMNODES; nid++)
 		zone_movable_pfn[nid] =
 			roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
+
+out:
+	/* restore the node_state */
+	node_states[N_HIGH_MEMORY] = saved_node_state;
 }
 
 /* Any regular memory on that node ? */
@@ -4242,11 +4248,6 @@
 						early_node_map[i].start_pfn,
 						early_node_map[i].end_pfn);
 
-	/*
-	 * find_zone_movable_pfns_for_nodes/early_calculate_totalpages init
-	 * that node_mask, clear it at first
-	 */
-	nodes_clear(node_states[N_HIGH_MEMORY]);
 	/* Initialise every node */
 	mminit_verify_pageflags_layout();
 	setup_nr_node_ids();
diff --git a/mm/percpu.c b/mm/percpu.c
index c0b2c1a..b70f2ac 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -549,14 +549,14 @@
  * @chunk: chunk of interest
  * @page_start: page index of the first page to unmap
  * @page_end: page index of the last page to unmap + 1
- * @flush: whether to flush cache and tlb or not
+ * @flush_tlb: whether to flush tlb or not
  *
  * For each cpu, unmap pages [@page_start,@page_end) out of @chunk.
  * If @flush is true, vcache is flushed before unmapping and tlb
  * after.
  */
 static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end,
-		       bool flush)
+		       bool flush_tlb)
 {
 	unsigned int last = num_possible_cpus() - 1;
 	unsigned int cpu;
@@ -569,9 +569,8 @@
 	 * the whole region at once rather than doing it for each cpu.
 	 * This could be an overkill but is more scalable.
 	 */
-	if (flush)
-		flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
-				   pcpu_chunk_addr(chunk, last, page_end));
+	flush_cache_vunmap(pcpu_chunk_addr(chunk, 0, page_start),
+			   pcpu_chunk_addr(chunk, last, page_end));
 
 	for_each_possible_cpu(cpu)
 		unmap_kernel_range_noflush(
@@ -579,7 +578,7 @@
 				(page_end - page_start) << PAGE_SHIFT);
 
 	/* ditto as flush_cache_vunmap() */
-	if (flush)
+	if (flush_tlb)
 		flush_tlb_kernel_range(pcpu_chunk_addr(chunk, 0, page_start),
 				       pcpu_chunk_addr(chunk, last, page_end));
 }
@@ -1234,6 +1233,7 @@
 ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
 				      ssize_t dyn_size, ssize_t unit_size)
 {
+	size_t chunk_size;
 	unsigned int cpu;
 
 	/* determine parameters and allocate */
@@ -1248,11 +1248,15 @@
 	} else
 		pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
 
-	pcpue_ptr = __alloc_bootmem_nopanic(
-					num_possible_cpus() * pcpue_unit_size,
-					PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-	if (!pcpue_ptr)
+	chunk_size = pcpue_unit_size * num_possible_cpus();
+
+	pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
+					    __pa(MAX_DMA_ADDRESS));
+	if (!pcpue_ptr) {
+		pr_warning("PERCPU: failed to allocate %zu bytes for "
+			   "embedding\n", chunk_size);
 		return -ENOMEM;
+	}
 
 	/* return the leftover and copy */
 	for_each_possible_cpu(cpu) {
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 9aac521..e1241c7 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -93,7 +93,7 @@
 
 	unregister_pernet_subsys(&br_net_ops);
 
-	synchronize_net();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
 	br_netfilter_fini();
 #if defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE)
diff --git a/net/core/dev.c b/net/core/dev.c
index 60b5728..70c27e0 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2823,9 +2823,11 @@
 		 * move the instance around on the list at-will.
 		 */
 		if (unlikely(work == weight)) {
-			if (unlikely(napi_disable_pending(n)))
-				__napi_complete(n);
-			else
+			if (unlikely(napi_disable_pending(n))) {
+				local_irq_enable();
+				napi_complete(n);
+				local_irq_disable();
+			} else
 				list_move_tail(&n->poll_list, list);
 		}
 
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index d351b8d..77d4028 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -2413,6 +2413,8 @@
 	proc_net_remove(&init_net, "decnet");
 
 	proto_unregister(&dn_proto);
+
+	rcu_barrier_bh(); /* Wait for completion of call_rcu_bh()'s */
 }
 module_exit(decnet_exit);
 #endif
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index 105ad10..27eda9f 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -276,6 +276,9 @@
 	else
 		return NULL;
 
+	if (!dev)
+		return NULL;
+
 	if (dev->type != ARPHRD_IEEE802154) {
 		dev_put(dev);
 		return NULL;
@@ -521,3 +524,6 @@
 }
 module_exit(ieee802154_nl_exit);
 
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ieee 802.15.4 configuration interface");
+
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 8a3881e..c29d75d 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -801,11 +801,8 @@
  *  cache.
  */
 
-	/*
-	 *  Special case: IPv4 duplicate address detection packet (RFC2131)
-	 *  and Gratuitous ARP/ARP Announce. (RFC3927, Section 2.4)
-	 */
-	if (sip == 0 || tip == sip) {
+	/* Special case: IPv4 duplicate address detection packet (RFC2131) */
+	if (sip == 0) {
 		if (arp->ar_op == htons(ARPOP_REQUEST) &&
 		    inet_addr_type(net, tip) == RTN_LOCAL &&
 		    !arp_ignore(in_dev, sip, tip))
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 012cf5a..00a54b2 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -1021,6 +1021,9 @@
 				      (struct node *)tn, wasfull);
 
 		tp = node_parent((struct node *) tn);
+		if (!tp)
+			rcu_assign_pointer(t->trie, (struct node *)tn);
+
 		tnode_free_flush();
 		if (!tp)
 			break;
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 490ce20..db46b4b 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -440,6 +440,9 @@
 	/* Remove any debris in the socket control block */
 	memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
 
+	/* Must drop socket now because of tproxy. */
+	skb_orphan(skb);
+
 	return NF_HOOK(PF_INET, NF_INET_PRE_ROUTING, skb, dev, NULL,
 		       ip_rcv_finish);
 
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 155c008..09172a6 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -191,7 +191,8 @@
 				    ct, ctinfo);
 		/* Tell TCP window tracking about seq change */
 		nf_conntrack_tcp_update(skb, ip_hdrlen(skb),
-					ct, CTINFO2DIR(ctinfo));
+					ct, CTINFO2DIR(ctinfo),
+					(int)rep_len - (int)match_len);
 
 		nf_conntrack_event_cache(IPCT_NATSEQADJ, ct);
 	}
@@ -377,6 +378,7 @@
 	struct tcphdr *tcph;
 	int dir;
 	__be32 newseq, newack;
+	s16 seqoff, ackoff;
 	struct nf_conn_nat *nat = nfct_nat(ct);
 	struct nf_nat_seq *this_way, *other_way;
 
@@ -390,15 +392,18 @@
 
 	tcph = (void *)skb->data + ip_hdrlen(skb);
 	if (after(ntohl(tcph->seq), this_way->correction_pos))
-		newseq = htonl(ntohl(tcph->seq) + this_way->offset_after);
+		seqoff = this_way->offset_after;
 	else
-		newseq = htonl(ntohl(tcph->seq) + this_way->offset_before);
+		seqoff = this_way->offset_before;
 
 	if (after(ntohl(tcph->ack_seq) - other_way->offset_before,
 		  other_way->correction_pos))
-		newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_after);
+		ackoff = other_way->offset_after;
 	else
-		newack = htonl(ntohl(tcph->ack_seq) - other_way->offset_before);
+		ackoff = other_way->offset_before;
+
+	newseq = htonl(ntohl(tcph->seq) + seqoff);
+	newack = htonl(ntohl(tcph->ack_seq) - ackoff);
 
 	inet_proto_csum_replace4(&tcph->check, skb, tcph->seq, newseq, 0);
 	inet_proto_csum_replace4(&tcph->check, skb, tcph->ack_seq, newack, 0);
@@ -413,7 +418,7 @@
 	if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo))
 		return 0;
 
-	nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir);
+	nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff);
 
 	return 1;
 }
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 17b89c5..7870a53 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -903,13 +903,17 @@
 		iov++;
 
 		while (seglen > 0) {
-			int copy;
+			int copy = 0;
+			int max = size_goal;
 
 			skb = tcp_write_queue_tail(sk);
+			if (tcp_send_head(sk)) {
+				if (skb->ip_summed == CHECKSUM_NONE)
+					max = mss_now;
+				copy = max - skb->len;
+			}
 
-			if (!tcp_send_head(sk) ||
-			    (copy = size_goal - skb->len) <= 0) {
-
+			if (copy <= 0) {
 new_segment:
 				/* Allocate new segment. If the interface is SG,
 				 * allocate skb fitting to single page.
@@ -930,6 +934,7 @@
 
 				skb_entail(sk, skb);
 				copy = size_goal;
+				max = size_goal;
 			}
 
 			/* Try to append data to the end of skb. */
@@ -1028,7 +1033,7 @@
 			if ((seglen -= copy) == 0 && iovlen == 0)
 				goto out;
 
-			if (skb->len < size_goal || (flags & MSG_OOB))
+			if (skb->len < max || (flags & MSG_OOB))
 				continue;
 
 			if (forced_push(tp)) {
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 43bbba7..f8d67cc 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -128,7 +128,8 @@
 			goto kill_with_rst;
 
 		/* Dup ACK? */
-		if (!after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
+		if (!th->ack ||
+		    !after(TCP_SKB_CB(skb)->end_seq, tcptw->tw_rcv_nxt) ||
 		    TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq) {
 			inet_twsk_put(tw);
 			return TCP_TW_SUCCESS;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 416fc4c..5bdf08d 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -725,7 +725,8 @@
 static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb,
 				 unsigned int mss_now)
 {
-	if (skb->len <= mss_now || !sk_can_gso(sk)) {
+	if (skb->len <= mss_now || !sk_can_gso(sk) ||
+	    skb->ip_summed == CHECKSUM_NONE) {
 		/* Avoid the costly divide in the normal
 		 * non-TSO case.
 		 */
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8c1e86a..3883b40 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3362,7 +3362,10 @@
 		valid = ifa->valid_lft;
 		if (preferred != INFINITY_LIFE_TIME) {
 			long tval = (jiffies - ifa->tstamp)/HZ;
-			preferred -= tval;
+			if (preferred > tval)
+				preferred -= tval;
+			else
+				preferred = 0;
 			if (valid != INFINITY_LIFE_TIME)
 				valid -= tval;
 		}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 85b3d00..caa0278 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -1284,6 +1284,8 @@
 	proto_unregister(&udplitev6_prot);
 	proto_unregister(&udpv6_prot);
 	proto_unregister(&tcpv6_prot);
+
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 module_exit(inet6_exit);
 
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index c3a07d7..6d6a427 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -139,6 +139,9 @@
 
 	rcu_read_unlock();
 
+	/* Must drop socket now because of tproxy. */
+	skb_orphan(skb);
+
 	return NF_HOOK(PF_INET6, NF_INET_PRE_ROUTING, skb, dev, NULL,
 		       ip6_rcv_finish);
 err:
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index fc712e6..11cf45b 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -494,7 +494,7 @@
 	 * should it be using the interface and enqueuing
 	 * frames at this very time on another CPU.
 	 */
-	synchronize_rcu();
+	rcu_barrier(); /* Wait for RX path and call_rcu()'s */
 	skb_queue_purge(&sdata->u.mesh.skb_queue);
 }
 
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index afde8f9..2032dfe 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -617,8 +617,10 @@
 void nf_conntrack_expect_fini(struct net *net)
 {
 	exp_proc_remove(net);
-	if (net_eq(net, &init_net))
+	if (net_eq(net, &init_net)) {
+		rcu_barrier(); /* Wait for call_rcu() before destroy */
 		kmem_cache_destroy(nf_ct_expect_cachep);
+	}
 	nf_ct_free_hashtable(net->ct.expect_hash, net->ct.expect_vmalloc,
 			     nf_ct_expect_hsize);
 }
diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c
index 4b2c769..fef95be 100644
--- a/net/netfilter/nf_conntrack_extend.c
+++ b/net/netfilter/nf_conntrack_extend.c
@@ -186,6 +186,6 @@
 	rcu_assign_pointer(nf_ct_ext_types[type->id], NULL);
 	update_alloc_size(type);
 	mutex_unlock(&nf_ct_ext_type_mutex);
-	synchronize_rcu();
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 EXPORT_SYMBOL_GPL(nf_ct_extend_unregister);
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 33fc0a4..97a82ba 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -720,8 +720,8 @@
 /* Caller must linearize skb at tcp header. */
 void nf_conntrack_tcp_update(const struct sk_buff *skb,
 			     unsigned int dataoff,
-			     struct nf_conn *ct,
-			     int dir)
+			     struct nf_conn *ct, int dir,
+			     s16 offset)
 {
 	const struct tcphdr *tcph = (const void *)skb->data + dataoff;
 	const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir];
@@ -734,7 +734,7 @@
 	/*
 	 * We have to worry for the ack in the reply packet only...
 	 */
-	if (after(end, ct->proto.tcp.seen[dir].td_end))
+	if (ct->proto.tcp.seen[dir].td_end + offset == end)
 		ct->proto.tcp.seen[dir].td_end = end;
 	ct->proto.tcp.last_end = end;
 	spin_unlock_bh(&ct->lock);
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 0b7139f..fc58180 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -129,7 +129,7 @@
 
 static inline bool
 conntrack_mt_origsrc(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3,
@@ -138,7 +138,7 @@
 
 static inline bool
 conntrack_mt_origdst(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3,
@@ -147,7 +147,7 @@
 
 static inline bool
 conntrack_mt_replsrc(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3,
@@ -156,7 +156,7 @@
 
 static inline bool
 conntrack_mt_repldst(const struct nf_conn *ct,
-                     const struct xt_conntrack_mtinfo1 *info,
+                     const struct xt_conntrack_mtinfo2 *info,
 		     u_int8_t family)
 {
 	return conntrack_addrcmp(&ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3,
@@ -164,7 +164,7 @@
 }
 
 static inline bool
-ct_proto_port_check(const struct xt_conntrack_mtinfo1 *info,
+ct_proto_port_check(const struct xt_conntrack_mtinfo2 *info,
                     const struct nf_conn *ct)
 {
 	const struct nf_conntrack_tuple *tuple;
@@ -204,7 +204,7 @@
 static bool
 conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par)
 {
-	const struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+	const struct xt_conntrack_mtinfo2 *info = par->matchinfo;
 	enum ip_conntrack_info ctinfo;
 	const struct nf_conn *ct;
 	unsigned int statebit;
@@ -278,6 +278,16 @@
 	return true;
 }
 
+static bool
+conntrack_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	const struct xt_conntrack_mtinfo2 *const *info = par->matchinfo;
+	struct xt_match_param newpar = *par;
+
+	newpar.matchinfo = *info;
+	return conntrack_mt(skb, &newpar);
+}
+
 static bool conntrack_mt_check(const struct xt_mtchk_param *par)
 {
 	if (nf_ct_l3proto_try_module_get(par->family) < 0) {
@@ -288,11 +298,45 @@
 	return true;
 }
 
+static bool conntrack_mt_check_v1(const struct xt_mtchk_param *par)
+{
+	struct xt_conntrack_mtinfo1 *info = par->matchinfo;
+	struct xt_conntrack_mtinfo2 *up;
+	int ret = conntrack_mt_check(par);
+
+	if (ret < 0)
+		return ret;
+
+	up = kmalloc(sizeof(*up), GFP_KERNEL);
+	if (up == NULL) {
+		nf_ct_l3proto_module_put(par->family);
+		return -ENOMEM;
+	}
+
+	/*
+	 * The strategy here is to minimize the overhead of v1 matching,
+	 * by prebuilding a v2 struct and putting the pointer into the
+	 * v1 dataspace.
+	 */
+	memcpy(up, info, offsetof(typeof(*info), state_mask));
+	up->state_mask  = info->state_mask;
+	up->status_mask = info->status_mask;
+	*(void **)info  = up;
+	return true;
+}
+
 static void conntrack_mt_destroy(const struct xt_mtdtor_param *par)
 {
 	nf_ct_l3proto_module_put(par->family);
 }
 
+static void conntrack_mt_destroy_v1(const struct xt_mtdtor_param *par)
+{
+	struct xt_conntrack_mtinfo2 **info = par->matchinfo;
+	kfree(*info);
+	conntrack_mt_destroy(par);
+}
+
 #ifdef CONFIG_COMPAT
 struct compat_xt_conntrack_info
 {
@@ -363,6 +407,16 @@
 		.revision   = 1,
 		.family     = NFPROTO_UNSPEC,
 		.matchsize  = sizeof(struct xt_conntrack_mtinfo1),
+		.match      = conntrack_mt_v1,
+		.checkentry = conntrack_mt_check_v1,
+		.destroy    = conntrack_mt_destroy_v1,
+		.me         = THIS_MODULE,
+	},
+	{
+		.name       = "conntrack",
+		.revision   = 2,
+		.family     = NFPROTO_UNSPEC,
+		.matchsize  = sizeof(struct xt_conntrack_mtinfo2),
 		.match      = conntrack_mt,
 		.checkentry = conntrack_mt_check,
 		.destroy    = conntrack_mt_destroy,
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 80a322d..b0d6ddd 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -69,10 +69,27 @@
 	return NULL;
 }
 
-static void __phonet_device_free(struct phonet_device *pnd)
+static void phonet_device_destroy(struct net_device *dev)
 {
-	list_del(&pnd->list);
-	kfree(pnd);
+	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
+	struct phonet_device *pnd;
+
+	ASSERT_RTNL();
+
+	spin_lock_bh(&pndevs->lock);
+	pnd = __phonet_get(dev);
+	if (pnd)
+		list_del(&pnd->list);
+	spin_unlock_bh(&pndevs->lock);
+
+	if (pnd) {
+		u8 addr;
+
+		for (addr = find_first_bit(pnd->addrs, 64); addr < 64;
+			addr = find_next_bit(pnd->addrs, 64, 1+addr))
+			phonet_address_notify(RTM_DELADDR, dev, addr);
+		kfree(pnd);
+	}
 }
 
 struct net_device *phonet_device_get(struct net *net)
@@ -126,8 +143,10 @@
 	pnd = __phonet_get(dev);
 	if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
 		err = -EADDRNOTAVAIL;
-	else if (bitmap_empty(pnd->addrs, 64))
-		__phonet_device_free(pnd);
+	else if (bitmap_empty(pnd->addrs, 64)) {
+		list_del(&pnd->list);
+		kfree(pnd);
+	}
 	spin_unlock_bh(&pndevs->lock);
 	return err;
 }
@@ -181,18 +200,8 @@
 {
 	struct net_device *dev = arg;
 
-	if (what == NETDEV_UNREGISTER) {
-		struct phonet_device_list *pndevs;
-		struct phonet_device *pnd;
-
-		/* Destroy phonet-specific device data */
-		pndevs = phonet_device_list(dev_net(dev));
-		spin_lock_bh(&pndevs->lock);
-		pnd = __phonet_get(dev);
-		if (pnd)
-			__phonet_device_free(pnd);
-		spin_unlock_bh(&pndevs->lock);
-	}
+	if (what == NETDEV_UNREGISTER)
+		phonet_device_destroy(dev);
 	return 0;
 
 }
@@ -218,11 +227,12 @@
 static void phonet_exit_net(struct net *net)
 {
 	struct phonet_net *pnn = net_generic(net, phonet_net_id);
-	struct phonet_device *pnd, *n;
+	struct net_device *dev;
 
-	list_for_each_entry_safe(pnd, n, &pnn->pndevs.list, list)
-		__phonet_device_free(pnd);
-
+	rtnl_lock();
+	for_each_netdev(net, dev)
+		phonet_device_destroy(dev);
+	rtnl_unlock();
 	kfree(pnn);
 }
 
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index cec4e59..f8b4cee 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -32,7 +32,7 @@
 static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
 		     u32 pid, u32 seq, int event);
 
-static void rtmsg_notify(int event, struct net_device *dev, u8 addr)
+void phonet_address_notify(int event, struct net_device *dev, u8 addr)
 {
 	struct sk_buff *skb;
 	int err = -ENOBUFS;
@@ -94,7 +94,7 @@
 	else
 		err = phonet_address_del(dev, pnaddr);
 	if (!err)
-		rtmsg_notify(nlh->nlmsg_type, dev, pnaddr);
+		phonet_address_notify(nlh->nlmsg_type, dev, pnaddr);
 	return err;
 }
 
diff --git a/net/sctp/output.c b/net/sctp/output.c
index b764114..b94c211 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -407,7 +407,7 @@
 	}
 	dst = dst_clone(tp->dst);
 	skb_dst_set(nskb, dst);
-	if (dst)
+	if (!dst)
 		goto no_route;
 
 	/* Build the SCTP header.  */
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index 843629f..adaa819 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -66,6 +66,7 @@
 #ifdef CONFIG_PROC_FS
 	rpc_proc_exit();
 #endif
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 MODULE_LICENSE("GPL");
 module_init(init_sunrpc);
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index d31ccb4..faf54c6 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -292,8 +292,8 @@
 	}
 },
 {
-	.name = "cbc(cast128)",
-	.compat = "cast128",
+	.name = "cbc(cast5)",
+	.compat = "cast5",
 
 	.uinfo = {
 		.encr = {
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 5f1f865..f2f7c63 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -668,22 +668,10 @@
 	hlist_for_each_entry(x, entry, net->xfrm.state_byspi+h, byspi) {
 		if (x->props.family != family ||
 		    x->id.spi       != spi ||
-		    x->id.proto     != proto)
+		    x->id.proto     != proto ||
+		    xfrm_addr_cmp(&x->id.daddr, daddr, family))
 			continue;
 
-		switch (family) {
-		case AF_INET:
-			if (x->id.daddr.a4 != daddr->a4)
-				continue;
-			break;
-		case AF_INET6:
-			if (!ipv6_addr_equal((struct in6_addr *)daddr,
-					     (struct in6_addr *)
-					     x->id.daddr.a6))
-				continue;
-			break;
-		}
-
 		xfrm_state_hold(x);
 		return x;
 	}
@@ -699,26 +687,11 @@
 
 	hlist_for_each_entry(x, entry, net->xfrm.state_bysrc+h, bysrc) {
 		if (x->props.family != family ||
-		    x->id.proto     != proto)
+		    x->id.proto     != proto ||
+		    xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+		    xfrm_addr_cmp(&x->props.saddr, saddr, family))
 			continue;
 
-		switch (family) {
-		case AF_INET:
-			if (x->id.daddr.a4 != daddr->a4 ||
-			    x->props.saddr.a4 != saddr->a4)
-				continue;
-			break;
-		case AF_INET6:
-			if (!ipv6_addr_equal((struct in6_addr *)daddr,
-					     (struct in6_addr *)
-					     x->id.daddr.a6) ||
-			    !ipv6_addr_equal((struct in6_addr *)saddr,
-					     (struct in6_addr *)
-					     x->props.saddr.a6))
-				continue;
-			break;
-		}
-
 		xfrm_state_hold(x);
 		return x;
 	}
@@ -1001,25 +974,11 @@
 		    x->props.family != family ||
 		    x->km.state     != XFRM_STATE_ACQ ||
 		    x->id.spi       != 0 ||
-		    x->id.proto	    != proto)
+		    x->id.proto	    != proto ||
+		    xfrm_addr_cmp(&x->id.daddr, daddr, family) ||
+		    xfrm_addr_cmp(&x->props.saddr, saddr, family))
 			continue;
 
-		switch (family) {
-		case AF_INET:
-			if (x->id.daddr.a4    != daddr->a4 ||
-			    x->props.saddr.a4 != saddr->a4)
-				continue;
-			break;
-		case AF_INET6:
-			if (!ipv6_addr_equal((struct in6_addr *)x->id.daddr.a6,
-					     (struct in6_addr *)daddr) ||
-			    !ipv6_addr_equal((struct in6_addr *)
-					     x->props.saddr.a6,
-					     (struct in6_addr *)saddr))
-				continue;
-			break;
-		}
-
 		xfrm_state_hold(x);
 		return x;
 	}
diff --git a/scripts/dtc/.gitignore b/scripts/dtc/.gitignore
new file mode 100644
index 0000000..095acb4
--- /dev/null
+++ b/scripts/dtc/.gitignore
@@ -0,0 +1,5 @@
+dtc
+dtc-lexer.lex.c
+dtc-parser.tab.c
+dtc-parser.tab.h
+
diff --git a/scripts/pnmtologo.c b/scripts/pnmtologo.c
index 64f5ddb..5c11312 100644
--- a/scripts/pnmtologo.c
+++ b/scripts/pnmtologo.c
@@ -237,7 +237,7 @@
     fprintf(out, " *  Linux logo %s\n", logoname);
     fputs(" */\n\n", out);
     fputs("#include <linux/linux_logo.h>\n\n", out);
-    fprintf(out, "static const unsigned char %s_data[] __initconst = {\n",
+    fprintf(out, "static unsigned char %s_data[] __initdata = {\n",
 	    logoname);
 }
 
@@ -374,7 +374,7 @@
     fputs("\n};\n\n", out);
 
     /* write logo clut */
-    fprintf(out, "static const unsigned char %s_clut[] __initconst = {\n",
+    fprintf(out, "static unsigned char %s_clut[] __initdata = {\n",
 	    logoname);
     write_hex_cnt = 0;
     for (i = 0; i < logo_clutsize; i++) {
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 6f61187..101c512 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -238,7 +238,34 @@
 }
 
 /*
- * ima_opens_get - increment file counts
+ * ima_counts_put - decrement file counts
+ *
+ * File counts are incremented in ima_path_check. On file open
+ * error, such as ETXTBSY, decrement the counts to prevent
+ * unnecessary imbalance messages.
+ */
+void ima_counts_put(struct path *path, int mask)
+{
+	struct inode *inode = path->dentry->d_inode;
+	struct ima_iint_cache *iint;
+
+	if (!ima_initialized || !S_ISREG(inode->i_mode))
+		return;
+	iint = ima_iint_find_insert_get(inode);
+	if (!iint)
+		return;
+
+	mutex_lock(&iint->mutex);
+	iint->opencount--;
+	if ((mask & MAY_WRITE) || (mask == 0))
+		iint->writecount--;
+	else if (mask & (MAY_READ | MAY_EXEC))
+		iint->readcount--;
+	mutex_unlock(&iint->mutex);
+}
+
+/*
+ * ima_counts_get - increment file counts
  *
  * - for IPC shm and shmat file.
  * - for nfsd exported files.
diff --git a/security/integrity/ima/ima_queue.c b/security/integrity/ima/ima_queue.c
index 7ec9431..a0880e9 100644
--- a/security/integrity/ima/ima_queue.c
+++ b/security/integrity/ima/ima_queue.c
@@ -134,7 +134,8 @@
 	}
 out:
 	mutex_unlock(&ima_extend_list_mutex);
-	integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, entry->template_name,
+	integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
+			    entry->template.file_name,
 			    op, audit_cause, result, audit_info);
 	return result;
 }
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index de83608..3ee0269 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -338,7 +338,7 @@
 		return -EBUSY;
 
 	acard->mpu = pnp_request_card_device(card, id->devs[2].id, NULL);
-	if (acard->play == NULL)
+	if (acard->mpu == NULL)
 		return -EBUSY;
 
 	pdev = acard->cap;
diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
index c180598..89466b0 100644
--- a/sound/oss/kahlua.c
+++ b/sound/oss/kahlua.c
@@ -199,7 +199,7 @@
  */
 
 static struct pci_device_id id_tbl[] = {
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
 	{ }
 };
 
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 6c0a770..1b2316f 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -926,31 +926,21 @@
 static void mpu401_chk_version(int n, struct mpu_config *devc)
 {
 	int tmp;
-	unsigned long flags;
 
 	devc->version = devc->revision = 0;
 
-	spin_lock_irqsave(&devc->lock,flags);
-	if ((tmp = mpu_cmd(n, 0xAC, 0)) < 0)
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
+	tmp = mpu_cmd(n, 0xAC, 0);
+	if (tmp < 0)
 		return;
-	}
 	if ((tmp & 0xf0) > 0x20)	/* Why it's larger than 2.x ??? */
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
 		return;
-	}
 	devc->version = tmp;
 
-	if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0)
-	{
+	if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) {
 		devc->version = 0;
-		spin_unlock_irqrestore(&devc->lock,flags);
 		return;
 	}
 	devc->revision = tmp;
-	spin_unlock_irqrestore(&devc->lock,flags);
 }
 
 int attach_mpu401(struct address_info *hw_config, struct module *owner)
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 71515dd..d6752df 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -287,10 +287,10 @@
 /*
  */
 static struct pci_device_id snd_atiixp_ids[] = {
-	{ 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
-	{ 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
-	{ 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
-	{ 0x1002, 0x4382, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB600 */
+	{ PCI_VDEVICE(ATI, 0x4341), 0 }, /* SB200 */
+	{ PCI_VDEVICE(ATI, 0x4361), 0 }, /* SB300 */
+	{ PCI_VDEVICE(ATI, 0x4370), 0 }, /* SB400 */
+	{ PCI_VDEVICE(ATI, 0x4382), 0 }, /* SB600 */
 	{ 0, }
 };
 
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index c3136cc..e7e147b 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -262,8 +262,8 @@
 /*
  */
 static struct pci_device_id snd_atiixp_ids[] = {
-	{ 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
-	{ 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
+	{ PCI_VDEVICE(ATI, 0x434d), 0 }, /* SB200 */
+	{ PCI_VDEVICE(ATI, 0x4378), 0 }, /* SB400 */
 	{ 0, }
 };
 
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index fce22c7..c0e8c6b 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,8 +1,7 @@
 #include "au8810.h"
 #include "au88x0.h"
 static struct pci_device_id snd_vortex_ids[] = {
-	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
+	{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE), 1,},
 	{0,}
 };
 
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index d1fbcce..a652733 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,8 +1,7 @@
 #include "au8820.h"
 #include "au88x0.h"
 static struct pci_device_id snd_vortex_ids[] = {
-	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1), 0,},
 	{0,}
 };
 
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index d4f2717..6c702ad 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,8 +1,7 @@
 #include "au8830.h"
 #include "au88x0.h"
 static struct pci_device_id snd_vortex_ids[] = {
-	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{PCI_VDEVICE(AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2), 0,},
 	{0,}
 };
 
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 57b992a..f24bf1e 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1876,7 +1876,7 @@
 
 // PCI IDs
 static struct pci_device_id snd_ca0106_ids[] = {
-	{ 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Audigy LS or Live 24bit */
+	{ PCI_VDEVICE(CREATIVE, 0x0007), 0 },	/* Audigy LS or Live 24bit */
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, snd_ca0106_ids);
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 449fe02..ddcd4a9 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2797,11 +2797,11 @@
 
 
 static struct pci_device_id snd_cmipci_ids[] = {
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_AL, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A), 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B), 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
+	{PCI_VDEVICE(CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738B), 0},
+	{PCI_VDEVICE(AL, PCI_DEVICE_ID_CMEDIA_CM8738), 0},
 	{0,},
 };
 
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index f6286f8..e2e0359 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -495,7 +495,7 @@
 static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id);
 
 static struct pci_device_id snd_cs4281_ids[] = {
-	{ 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* CS4281 */
+	{ PCI_VDEVICE(CIRRUS, 0x6005), 0, },	/* CS4281 */
 	{ 0, }
 };
 
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index c9b3e3d..033aec4 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -65,9 +65,9 @@
 MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
 
 static struct pci_device_id snd_cs46xx_ids[] = {
-        { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4280 */
-        { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4612 */
-        { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4615 */
+	{ PCI_VDEVICE(CIRRUS, 0x6001), 0, },   /* CS4280 */
+	{ PCI_VDEVICE(CIRRUS, 0x6003), 0, },   /* CS4612 */
+	{ PCI_VDEVICE(CIRRUS, 0x6004), 0, },   /* CS4615 */
 	{ 0, }
 };
 
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index c7f3b99..168af67 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -77,9 +77,9 @@
  * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value  Model:SB0400
  */
 static struct pci_device_id snd_emu10k1_ids[] = {
-	{ 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* EMU10K1 */
-	{ 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy */
-	{ 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy 2 Value SB0400 */
+	{ PCI_VDEVICE(CREATIVE, 0x0002), 0 },	/* EMU10K1 */
+	{ PCI_VDEVICE(CREATIVE, 0x0004), 1 },	/* Audigy */
+	{ PCI_VDEVICE(CREATIVE, 0x0008), 1 },	/* Audigy 2 Value SB0400 */
 	{ 0, }
 };
 
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 4d3ad79..36e08bd 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1607,7 +1607,7 @@
 
 // PCI IDs
 static struct pci_device_id snd_emu10k1x_ids[] = {
-	{ 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Dell OEM version (EMU10K1) */
+	{ PCI_VDEVICE(CREATIVE, 0x0006), 0 },	/* Dell OEM version (EMU10K1) */
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, snd_emu10k1x_ids);
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index 18f4d1e..2b82c5c 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -445,12 +445,12 @@
 
 static struct pci_device_id snd_audiopci_ids[] = {
 #ifdef CHIP1370
-	{ 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1370 */
+	{ PCI_VDEVICE(ENSONIQ, 0x5000), 0, },	/* ES1370 */
 #endif
 #ifdef CHIP1371
-	{ 0x1274, 0x1371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1371 */
-	{ 0x1274, 0x5880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1373 - CT5880 */
-	{ 0x1102, 0x8938, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* Ectiva EV1938 */
+	{ PCI_VDEVICE(ENSONIQ, 0x1371), 0, },	/* ES1371 */
+	{ PCI_VDEVICE(ENSONIQ, 0x5880), 0, },	/* ES1373 - CT5880 */
+	{ PCI_VDEVICE(ECTIVA, 0x8938), 0, },	/* Ectiva EV1938 */
 #endif
 	{ 0, }
 };
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index fbd2ac0..820318e 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -244,7 +244,7 @@
 static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id);
 
 static struct pci_device_id snd_es1938_ids[] = {
-        { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* Solo-1 */
+	{ PCI_VDEVICE(ESS, 0x1969), 0, },   /* Solo-1 */
 	{ 0, }
 };
 
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 84cc49c..1988582 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -72,6 +72,7 @@
 	hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
 
 	unsigned int jack_present :1;
+	unsigned int inv_jack_detect:1;
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	struct hda_loopback_check loopback;
@@ -669,13 +670,15 @@
 	},
 };
 
-static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
+static struct snd_kcontrol_new ad1986a_laptop_master_mixers[] = {
 	HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
 	HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
@@ -699,31 +702,9 @@
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new ad1986a_samsung_mixers[] = {
-	HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
-	HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
-	HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.info = ad198x_mux_enum_info,
-		.get = ad198x_mux_enum_get,
-		.put = ad198x_mux_enum_put,
-	},
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "External Amplifier",
-		.info = ad198x_eapd_info,
-		.get = ad198x_eapd_get,
-		.put = ad198x_eapd_put,
-		.private_value = 0x1b | (1 << 8), /* port-D, inversed */
-	},
+static struct snd_kcontrol_new ad1986a_laptop_intmic_mixers[] = {
+	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
 	{ } /* end */
 };
 
@@ -776,8 +757,9 @@
 	unsigned int present;
 
 	present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0);
-	/* Lenovo N100 seems to report the reversed bit for HP jack-sensing */
-	spec->jack_present = !(present & 0x80000000);
+	spec->jack_present = !!(present & 0x80000000);
+	if (spec->inv_jack_detect)
+		spec->jack_present = !spec->jack_present;
 	ad1986a_update_hp(codec);
 }
 
@@ -816,7 +798,7 @@
 	return change;
 }
 
-static struct snd_kcontrol_new ad1986a_laptop_automute_mixers[] = {
+static struct snd_kcontrol_new ad1986a_automute_master_mixers[] = {
 	HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -826,33 +808,10 @@
 		.put = ad1986a_hp_master_sw_put,
 		.private_value = HDA_COMPOSE_AMP_VAL(0x1a, 3, 0, HDA_OUTPUT),
 	},
-	HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.info = ad198x_mux_enum_info,
-		.get = ad198x_mux_enum_get,
-		.put = ad198x_mux_enum_put,
-	},
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "External Amplifier",
-		.info = ad198x_eapd_info,
-		.get = ad198x_eapd_get,
-		.put = ad198x_eapd_put,
-		.private_value = 0x1b | (1 << 8), /* port-D, inversed */
-	},
 	{ } /* end */
 };
 
+
 /*
  * initialization verbs
  */
@@ -981,6 +940,27 @@
 	{}
 };
 
+static void ad1986a_samsung_p50_unsol_event(struct hda_codec *codec,
+					    unsigned int res)
+{
+	switch (res >> 26) {
+	case AD1986A_HP_EVENT:
+		ad1986a_hp_automute(codec);
+		break;
+	case AD1986A_MIC_EVENT:
+		ad1986a_automic(codec);
+		break;
+	}
+}
+
+static int ad1986a_samsung_p50_init(struct hda_codec *codec)
+{
+	ad198x_init(codec);
+	ad1986a_hp_automute(codec);
+	ad1986a_automic(codec);
+	return 0;
+}
+
 
 /* models */
 enum {
@@ -991,6 +971,7 @@
 	AD1986A_LAPTOP_AUTOMUTE,
 	AD1986A_ULTRA,
 	AD1986A_SAMSUNG,
+	AD1986A_SAMSUNG_P50,
 	AD1986A_MODELS
 };
 
@@ -1002,6 +983,7 @@
 	[AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute",
 	[AD1986A_ULTRA]		= "ultra",
 	[AD1986A_SAMSUNG]	= "samsung",
+	[AD1986A_SAMSUNG_P50]	= "samsung-p50",
 };
 
 static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
@@ -1024,6 +1006,7 @@
 	SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
 	SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
+	SND_PCI_QUIRK(0x144d, 0xc024, "Samsung P50", AD1986A_SAMSUNG_P50),
 	SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA),
 	SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG),
 	SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK),
@@ -1111,7 +1094,10 @@
 		spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
 		break;
 	case AD1986A_LAPTOP_EAPD:
-		spec->mixers[0] = ad1986a_laptop_eapd_mixers;
+		spec->num_mixers = 3;
+		spec->mixers[0] = ad1986a_laptop_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+		spec->mixers[2] = ad1986a_laptop_intmic_mixers;
 		spec->num_init_verbs = 2;
 		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
 		spec->multiout.max_channels = 2;
@@ -1122,7 +1108,9 @@
 		spec->input_mux = &ad1986a_laptop_eapd_capture_source;
 		break;
 	case AD1986A_SAMSUNG:
-		spec->mixers[0] = ad1986a_samsung_mixers;
+		spec->num_mixers = 2;
+		spec->mixers[0] = ad1986a_laptop_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
 		spec->num_init_verbs = 3;
 		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
 		spec->init_verbs[2] = ad1986a_automic_verbs;
@@ -1135,8 +1123,28 @@
 		codec->patch_ops.unsol_event = ad1986a_automic_unsol_event;
 		codec->patch_ops.init = ad1986a_automic_init;
 		break;
+	case AD1986A_SAMSUNG_P50:
+		spec->num_mixers = 2;
+		spec->mixers[0] = ad1986a_automute_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+		spec->num_init_verbs = 4;
+		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
+		spec->init_verbs[2] = ad1986a_automic_verbs;
+		spec->init_verbs[3] = ad1986a_hp_init_verbs;
+		spec->multiout.max_channels = 2;
+		spec->multiout.num_dacs = 1;
+		spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
+		if (!is_jack_available(codec, 0x25))
+			spec->multiout.dig_out_nid = 0;
+		spec->input_mux = &ad1986a_automic_capture_source;
+		codec->patch_ops.unsol_event = ad1986a_samsung_p50_unsol_event;
+		codec->patch_ops.init = ad1986a_samsung_p50_init;
+		break;
 	case AD1986A_LAPTOP_AUTOMUTE:
-		spec->mixers[0] = ad1986a_laptop_automute_mixers;
+		spec->num_mixers = 3;
+		spec->mixers[0] = ad1986a_automute_master_mixers;
+		spec->mixers[1] = ad1986a_laptop_eapd_mixers;
+		spec->mixers[2] = ad1986a_laptop_intmic_mixers;
 		spec->num_init_verbs = 3;
 		spec->init_verbs[1] = ad1986a_eapd_init_verbs;
 		spec->init_verbs[2] = ad1986a_hp_init_verbs;
@@ -1148,6 +1156,10 @@
 		spec->input_mux = &ad1986a_laptop_eapd_capture_source;
 		codec->patch_ops.unsol_event = ad1986a_hp_unsol_event;
 		codec->patch_ops.init = ad1986a_hp_init;
+		/* Lenovo N100 seems to report the reversed bit
+		 * for HP jack-sensing
+		 */
+		spec->inv_jack_detect = 1;
 		break;
 	case AD1986A_ULTRA:
 		spec->mixers[0] = ad1986a_laptop_eapd_mixers;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 3345331..3a8e58c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -945,12 +945,13 @@
 static void alc_automute_pin(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int present;
+	unsigned int present, pincap;
 	unsigned int nid = spec->autocfg.hp_pins[0];
 	int i;
 
-	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+	pincap = snd_hda_query_pin_caps(codec, nid);
+	if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+		snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
 	present = snd_hda_codec_read(codec, nid, 0,
 				     AC_VERB_GET_PIN_SENSE, 0);
 	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
@@ -1392,7 +1393,7 @@
 static void alc_automute_amp(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int val, mute;
+	unsigned int val, mute, pincap;
 	hda_nid_t nid;
 	int i;
 
@@ -1401,6 +1402,10 @@
 		nid = spec->autocfg.hp_pins[i];
 		if (!nid)
 			break;
+		pincap = snd_hda_query_pin_caps(codec, nid);
+		if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+			snd_hda_codec_read(codec, nid, 0,
+					   AC_VERB_SET_PIN_SENSE, 0);
 		val = snd_hda_codec_read(codec, nid, 0,
 					 AC_VERB_GET_PIN_SENSE, 0);
 		if (val & AC_PINSENSE_PRESENCE) {
@@ -1471,6 +1476,10 @@
 static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
 /* Bias voltage on for external mic port */
 	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
 /* Enable unsolicited event for HP jack */
 	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 /* Enable speaker output */
@@ -1560,18 +1569,22 @@
 static struct hda_input_mux alc888_acer_aspire_6530_sources[2] = {
 	/* Interal mic only available on one ADC */
 	{
-		.num_items = 3,
+		.num_items = 5,
 		.items = {
 			{ "Ext Mic", 0x0 },
+			{ "Line In", 0x2 },
 			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
 			{ "Int Mic", 0xb },
 		},
 	},
 	{
-		.num_items = 2,
+		.num_items = 4,
 		.items = {
 			{ "Ext Mic", 0x0 },
+			{ "Line In", 0x2 },
 			{ "CD", 0x4 },
+			{ "Input Mix", 0xa },
 		},
 	}
 };
@@ -1639,6 +1652,17 @@
 	alc_automute_amp(codec);
 }
 
+static void alc888_acer_aspire_6530g_init_hook(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x17;
+	alc_automute_amp(codec);
+}
+
 static void alc889_acer_aspire_8930g_init_hook(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -8189,6 +8213,8 @@
 	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
 	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("LFE Playback Switch", 0x0f, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
@@ -9064,7 +9090,7 @@
 	SND_PCI_QUIRK(0x1025, 0x0157, "Acer X3200", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
-		ALC888_ACER_ASPIRE_4930G),
+		ALC888_ACER_ASPIRE_6530G),
 	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
 		ALC888_ACER_ASPIRE_6530G),
 	/* default Acer -- disabled as it causes more problems.
@@ -9317,7 +9343,7 @@
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_acer_aspire_6530_sources,
 		.unsol_event = alc_automute_amp_unsol_event,
-		.init_hook = alc888_acer_aspire_4930g_init_hook,
+		.init_hook = alc888_acer_aspire_6530g_init_hook,
 	},
 	[ALC888_ACER_ASPIRE_8930G] = {
 		.mixers = { alc888_base_mixer,
@@ -12437,6 +12463,8 @@
 	if (err < 0)
 		return err;
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
@@ -13345,6 +13373,8 @@
 	if (!spec->cap_mixer && !spec->no_analog)
 		set_capture_mixer(spec);
 
+	alc_ssid_check(codec, 0x15, 0x1b, 0x14);
+
 	return 1;
 }
 
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0d0cdbd..cecf1ff 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -107,7 +107,7 @@
 
 
 static const struct pci_device_id snd_ice1712_ids[] = {
-	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* ICE1712 */
+	{ PCI_VDEVICE(ICE, PCI_DEVICE_ID_ICE_1712), 0 },   /* ICE1712 */
 	{ 0, }
 };
 
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 36ade77..cc84a83 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -93,7 +93,7 @@
 
 /* Both VT1720 and VT1724 have the same PCI IDs */
 static const struct pci_device_id snd_vt1724_ids[] = {
-	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VDEVICE(ICE, PCI_DEVICE_ID_VT1724), 0 },
 	{ 0, }
 };
 
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 8aa5687..171ada5 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -421,29 +421,29 @@
 };
 
 static struct pci_device_id snd_intel8x0_ids[] = {
-	{ 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
-	{ 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
-	{ 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
-	{ 0x8086, 0x2485, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH3 */
-	{ 0x8086, 0x24c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH4 */
-	{ 0x8086, 0x24d5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH5 */
-	{ 0x8086, 0x25a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB */
-	{ 0x8086, 0x266e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH6 */
-	{ 0x8086, 0x27de, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ICH7 */
-	{ 0x8086, 0x2698, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL_ICH4 }, /* ESB2 */
-	{ 0x8086, 0x7195, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 440MX */
-	{ 0x1039, 0x7012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS },	/* SI7012 */
-	{ 0x10de, 0x01b1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* NFORCE */
-	{ 0x10de, 0x003a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* MCP04 */
-	{ 0x10de, 0x006a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* NFORCE2 */
-	{ 0x10de, 0x0059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* CK804 */
-	{ 0x10de, 0x008a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* CK8 */
-	{ 0x10de, 0x00da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* NFORCE3 */
-	{ 0x10de, 0x00ea, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* CK8S */
-	{ 0x10de, 0x026b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE },	/* MCP51 */
-	{ 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD8111 */
-	{ 0x1022, 0x7445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD768 */
-	{ 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI },   /* Ali5455 */
+	{ PCI_VDEVICE(INTEL, 0x2415), DEVICE_INTEL },	/* 82801AA */
+	{ PCI_VDEVICE(INTEL, 0x2425), DEVICE_INTEL },	/* 82901AB */
+	{ PCI_VDEVICE(INTEL, 0x2445), DEVICE_INTEL },	/* 82801BA */
+	{ PCI_VDEVICE(INTEL, 0x2485), DEVICE_INTEL },	/* ICH3 */
+	{ PCI_VDEVICE(INTEL, 0x24c5), DEVICE_INTEL_ICH4 }, /* ICH4 */
+	{ PCI_VDEVICE(INTEL, 0x24d5), DEVICE_INTEL_ICH4 }, /* ICH5 */
+	{ PCI_VDEVICE(INTEL, 0x25a6), DEVICE_INTEL_ICH4 }, /* ESB */
+	{ PCI_VDEVICE(INTEL, 0x266e), DEVICE_INTEL_ICH4 }, /* ICH6 */
+	{ PCI_VDEVICE(INTEL, 0x27de), DEVICE_INTEL_ICH4 }, /* ICH7 */
+	{ PCI_VDEVICE(INTEL, 0x2698), DEVICE_INTEL_ICH4 }, /* ESB2 */
+	{ PCI_VDEVICE(INTEL, 0x7195), DEVICE_INTEL },	/* 440MX */
+	{ PCI_VDEVICE(SI, 0x7012), DEVICE_SIS },	/* SI7012 */
+	{ PCI_VDEVICE(NVIDIA, 0x01b1), DEVICE_NFORCE },	/* NFORCE */
+	{ PCI_VDEVICE(NVIDIA, 0x003a), DEVICE_NFORCE },	/* MCP04 */
+	{ PCI_VDEVICE(NVIDIA, 0x006a), DEVICE_NFORCE },	/* NFORCE2 */
+	{ PCI_VDEVICE(NVIDIA, 0x0059), DEVICE_NFORCE },	/* CK804 */
+	{ PCI_VDEVICE(NVIDIA, 0x008a), DEVICE_NFORCE },	/* CK8 */
+	{ PCI_VDEVICE(NVIDIA, 0x00da), DEVICE_NFORCE },	/* NFORCE3 */
+	{ PCI_VDEVICE(NVIDIA, 0x00ea), DEVICE_NFORCE },	/* CK8S */
+	{ PCI_VDEVICE(NVIDIA, 0x026b), DEVICE_NFORCE },	/* MCP51 */
+	{ PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL },	/* AMD8111 */
+	{ PCI_VDEVICE(AMD, 0x7445), DEVICE_INTEL },	/* AMD768 */
+	{ PCI_VDEVICE(AL, 0x5455), DEVICE_ALI },   /* Ali5455 */
 	{ 0, }
 };
 
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 6ec0fc5..9e7d12e 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -220,24 +220,24 @@
 };
 
 static struct pci_device_id snd_intel8x0m_ids[] = {
-	{ 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
-	{ 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
-	{ 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
-	{ 0x8086, 0x2486, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH3 */
-	{ 0x8086, 0x24c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH4 */
-	{ 0x8086, 0x24d6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL }, /* ICH5 */
-	{ 0x8086, 0x266d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH6 */
-	{ 0x8086, 0x27dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* ICH7 */
-	{ 0x8086, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 440MX */
-	{ 0x1022, 0x7446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD768 */
-	{ 0x1039, 0x7013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_SIS },	/* SI7013 */
-	{ 0x10de, 0x01c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE */
-	{ 0x10de, 0x0069, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2 */
-	{ 0x10de, 0x0089, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE2s */
-	{ 0x10de, 0x00d9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_NFORCE }, /* NFORCE3 */
+	{ PCI_VDEVICE(INTEL, 0x2416), DEVICE_INTEL },	/* 82801AA */
+	{ PCI_VDEVICE(INTEL, 0x2426), DEVICE_INTEL },	/* 82901AB */
+	{ PCI_VDEVICE(INTEL, 0x2446), DEVICE_INTEL },	/* 82801BA */
+	{ PCI_VDEVICE(INTEL, 0x2486), DEVICE_INTEL },	/* ICH3 */
+	{ PCI_VDEVICE(INTEL, 0x24c6), DEVICE_INTEL }, /* ICH4 */
+	{ PCI_VDEVICE(INTEL, 0x24d6), DEVICE_INTEL }, /* ICH5 */
+	{ PCI_VDEVICE(INTEL, 0x266d), DEVICE_INTEL },	/* ICH6 */
+	{ PCI_VDEVICE(INTEL, 0x27dd), DEVICE_INTEL },	/* ICH7 */
+	{ PCI_VDEVICE(INTEL, 0x7196), DEVICE_INTEL },	/* 440MX */
+	{ PCI_VDEVICE(AMD, 0x7446), DEVICE_INTEL },	/* AMD768 */
+	{ PCI_VDEVICE(SI, 0x7013), DEVICE_SIS },	/* SI7013 */
+	{ PCI_VDEVICE(NVIDIA, 0x01c1), DEVICE_NFORCE }, /* NFORCE */
+	{ PCI_VDEVICE(NVIDIA, 0x0069), DEVICE_NFORCE }, /* NFORCE2 */
+	{ PCI_VDEVICE(NVIDIA, 0x0089), DEVICE_NFORCE }, /* NFORCE2s */
+	{ PCI_VDEVICE(NVIDIA, 0x00d9), DEVICE_NFORCE }, /* NFORCE3 */
 #if 0
-	{ 0x1022, 0x746d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* AMD8111 */
-	{ 0x10b9, 0x5455, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALI },   /* Ali5455 */
+	{ PCI_VDEVICE(AMD, 0x746d), DEVICE_INTEL },	/* AMD8111 */
+	{ PCI_VDEVICE(AL, 0x5455), DEVICE_ALI },   /* Ali5455 */
 #endif
 	{ 0, }
 };
diff --git a/sound/pci/lx6464es/lx6464es.c b/sound/pci/lx6464es/lx6464es.c
index 18da2ef..11b8c65 100644
--- a/sound/pci/lx6464es/lx6464es.c
+++ b/sound/pci/lx6464es/lx6464es.c
@@ -654,13 +654,12 @@
 	int i;
 	u32 orig_conf_es = lx_dsp_reg_read(chip, eReg_CONFES);
 
-	u32 default_conf_es = (64 << IOCR_OUTPUTS_OFFSET) |
+	/* configure 64 io channels */
+	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK) |
 		(64 << IOCR_INPUTS_OFFSET) |
+		(64 << IOCR_OUTPUTS_OFFSET) |
 		(FREQ_RATIO_SINGLE_MODE << FREQ_RATIO_OFFSET);
 
-	u32 conf_es = (orig_conf_es & CONFES_READ_PART_MASK)
-		| (default_conf_es & CONFES_WRITE_PART_MASK);
-
 	snd_printdd("->lx_init_ethersound\n");
 
 	chip->freq_ratio = FREQ_RATIO_SINGLE_MODE;
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index 82bc5b9..a83d196 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -61,7 +61,7 @@
  */
 
 static struct pci_device_id snd_mixart_ids[] = {
-	{ 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
+	{ PCI_VDEVICE(MOTOROLA, 0x0003), 0, }, /* MC8240 */
 	{ 0, }
 };
 
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index 522a040..97a0731 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -263,9 +263,9 @@
  * PCI ids
  */
 static struct pci_device_id snd_nm256_ids[] = {
-	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0},
+	{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0},
+	{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0},
 	{0,},
 };
 
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 304da16..5401c54 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -575,8 +575,10 @@
 static int ac97_volume_info(struct snd_kcontrol *ctl,
 			    struct snd_ctl_elem_info *info)
 {
+	int stereo = (ctl->private_value >> 16) & 1;
+
 	info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-	info->count = 2;
+	info->count = stereo ? 2 : 1;
 	info->value.integer.min = 0;
 	info->value.integer.max = 0x1f;
 	return 0;
@@ -587,6 +589,7 @@
 {
 	struct oxygen *chip = ctl->private_data;
 	unsigned int codec = (ctl->private_value >> 24) & 1;
+	int stereo = (ctl->private_value >> 16) & 1;
 	unsigned int index = ctl->private_value & 0xff;
 	u16 reg;
 
@@ -594,7 +597,8 @@
 	reg = oxygen_read_ac97(chip, codec, index);
 	mutex_unlock(&chip->mutex);
 	value->value.integer.value[0] = 31 - (reg & 0x1f);
-	value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
+	if (stereo)
+		value->value.integer.value[1] = 31 - ((reg >> 8) & 0x1f);
 	return 0;
 }
 
@@ -603,6 +607,7 @@
 {
 	struct oxygen *chip = ctl->private_data;
 	unsigned int codec = (ctl->private_value >> 24) & 1;
+	int stereo = (ctl->private_value >> 16) & 1;
 	unsigned int index = ctl->private_value & 0xff;
 	u16 oldreg, newreg;
 	int change;
@@ -612,8 +617,11 @@
 	newreg = oldreg;
 	newreg = (newreg & ~0x1f) |
 		(31 - (value->value.integer.value[0] & 0x1f));
-	newreg = (newreg & ~0x1f00) |
-		((31 - (value->value.integer.value[0] & 0x1f)) << 8);
+	if (stereo)
+		newreg = (newreg & ~0x1f00) |
+			((31 - (value->value.integer.value[1] & 0x1f)) << 8);
+	else
+		newreg = (newreg & ~0x1f00) | ((newreg & 0x1f) << 8);
 	change = newreg != oldreg;
 	if (change)
 		oxygen_write_ac97(chip, codec, index, newreg);
@@ -673,7 +681,7 @@
 		.private_value = ((codec) << 24) | ((invert) << 16) | \
 				 ((bitnr) << 8) | (index), \
 	}
-#define AC97_VOLUME(xname, codec, index) { \
+#define AC97_VOLUME(xname, codec, index, stereo) { \
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
 		.name = xname, \
 		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
@@ -682,7 +690,7 @@
 		.get = ac97_volume_get, \
 		.put = ac97_volume_put, \
 		.tlv = { .p = ac97_db_scale, }, \
-		.private_value = ((codec) << 24) | (index), \
+		.private_value = ((codec) << 24) | ((stereo) << 16) | (index), \
 	}
 
 static DECLARE_TLV_DB_SCALE(monitor_db_scale, -1000, 1000, 0);
@@ -882,18 +890,18 @@
 };
 
 static const struct snd_kcontrol_new ac97_controls[] = {
-	AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC),
+	AC97_VOLUME("Mic Capture Volume", 0, AC97_MIC, 0),
 	AC97_SWITCH("Mic Capture Switch", 0, AC97_MIC, 15, 1),
 	AC97_SWITCH("Mic Boost (+20dB)", 0, AC97_MIC, 6, 0),
 	AC97_SWITCH("Line Capture Switch", 0, AC97_LINE, 15, 1),
-	AC97_VOLUME("CD Capture Volume", 0, AC97_CD),
+	AC97_VOLUME("CD Capture Volume", 0, AC97_CD, 1),
 	AC97_SWITCH("CD Capture Switch", 0, AC97_CD, 15, 1),
-	AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX),
+	AC97_VOLUME("Aux Capture Volume", 0, AC97_AUX, 1),
 	AC97_SWITCH("Aux Capture Switch", 0, AC97_AUX, 15, 1),
 };
 
 static const struct snd_kcontrol_new ac97_fp_controls[] = {
-	AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE),
+	AC97_VOLUME("Front Panel Playback Volume", 1, AC97_HEADPHONE, 1),
 	AC97_SWITCH("Front Panel Playback Switch", 1, AC97_HEADPHONE, 15, 1),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index d7b966e..f977dba 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -227,12 +227,9 @@
 };
 
 static struct pci_device_id snd_rme32_ids[] = {
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
-	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
+	{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32), 0,},
+	{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8), 0,},
+	{PCI_VDEVICE(XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_PRO), 0,},
 	{0,}
 };
 
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 55fb1c1..2ba5c0f 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -232,14 +232,10 @@
 };
 
 static struct pci_device_id snd_rme96_ids[] = {
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
-	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, 
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96), 0, },
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8), 0, },
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PRO), 0, },
+	{ PCI_VDEVICE(XILINX, PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST), 0, },
 	{ 0, }
 };
 
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 7dc60ad..1f6406c 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -243,7 +243,7 @@
 };
 
 static struct pci_device_id snd_sonic_ids[] = {
-	{ 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
+	{ PCI_VDEVICE(S3, 0xca00), 0, },
         { 0, }
 };
 
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 949fcaf..acfa476 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -402,9 +402,9 @@
 
 static struct pci_device_id snd_via82xx_ids[] = {
 	/* 0x1106, 0x3058 */
-	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, },	/* 686A */
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C686_5), TYPE_CARD_VIA686, },	/* 686A */
 	/* 0x1106, 0x3059 */
-	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, },	/* VT8233 */
+	{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8233_5), TYPE_CARD_VIA8233, },	/* VT8233 */
 	{ 0, }
 };
 
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 0d54e35..47eb615 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -261,7 +261,7 @@
 };
 
 static struct pci_device_id snd_via82xx_modem_ids[] = {
-	{ 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
+	{ PCI_VDEVICE(VIA, 0x3068), TYPE_CARD_VIA82XX_MODEM, },
 	{ 0, }
 };
 
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 4af6666..e6b18b9 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -67,12 +67,12 @@
 MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
 
 static struct pci_device_id snd_ymfpci_ids[] = {
-        { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724 */
-        { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724F */
-        { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740 */
-        { 0x1073, 0x000c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740C */
-        { 0x1073, 0x0010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF744 */
-        { 0x1073, 0x0012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF754 */
+	{ PCI_VDEVICE(YAMAHA, 0x0004), 0, },   /* YMF724 */
+	{ PCI_VDEVICE(YAMAHA, 0x000d), 0, },   /* YMF724F */
+	{ PCI_VDEVICE(YAMAHA, 0x000a), 0, },   /* YMF740 */
+	{ PCI_VDEVICE(YAMAHA, 0x000c), 0, },   /* YMF740C */
+	{ PCI_VDEVICE(YAMAHA, 0x0010), 0, },   /* YMF744 */
+	{ PCI_VDEVICE(YAMAHA, 0x0012), 0, },   /* YMF754 */
 	{ 0, }
 };
 
diff --git a/tools/perf/CREDITS b/tools/perf/CREDITS
new file mode 100644
index 0000000..c2ddcb3
--- /dev/null
+++ b/tools/perf/CREDITS
@@ -0,0 +1,30 @@
+Most of the infrastructure that 'perf' uses here has been reused
+from the Git project, as of version:
+
+    66996ec: Sync with 1.6.2.4
+
+Here is an (incomplete!) list of main contributors to those files
+in util/* and elsewhere:
+
+ Alex Riesen
+ Christian Couder
+ Dmitry Potapov
+ Jeff King
+ Johannes Schindelin
+ Johannes Sixt
+ Junio C Hamano
+ Linus Torvalds
+ Matthias Kestenholz
+ Michal Ostrowski
+ Miklos Vajna
+ Petr Baudis
+ Pierre Habouzit
+ René Scharfe
+ Samuel Tardieu
+ Shawn O. Pearce
+ Steffen Prohaska
+ Steve Haslam
+
+Thanks guys!
+
+The full history of the files can be found in the upstream Git commits.
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 52d3fc6..8aa3f8c 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -13,13 +13,25 @@
 DESCRIPTION
 -----------
 This command displays the performance counter profile information recorded
-via perf report.
+via perf record.
 
 OPTIONS
 -------
 -i::
 --input=::
         Input file name. (default: perf.data)
+-d::
+--dsos=::
+	Only consider symbols in these dsos. CSV that understands
+	file://filename entries.
+-C::
+--comms=::
+	Only consider symbols in these comms. CSV that understands
+	file://filename entries.
+-S::
+--symbols=::
+	Only consider these symbols. CSV that understands
+	file://filename entries.
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index c368a72..0d74346 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -8,8 +8,8 @@
 SYNOPSIS
 --------
 [verse]
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-l] [-a] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>]
 
 DESCRIPTION
 -----------
@@ -40,7 +40,7 @@
 -a::
         system-wide collection
 
--l::
+-S::
         scale counter values
 
 EXAMPLES
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 36d7eef..9c6d0ae3 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -290,7 +290,7 @@
 
 LIB_H += ../../include/linux/perf_counter.h
 LIB_H += perf.h
-LIB_H += types.h
+LIB_H += util/types.h
 LIB_H += util/list.h
 LIB_H += util/rbtree.h
 LIB_H += util/levenshtein.h
@@ -301,6 +301,7 @@
 LIB_H += util/help.h
 LIB_H += util/strbuf.h
 LIB_H += util/string.h
+LIB_H += util/strlist.h
 LIB_H += util/run-command.h
 LIB_H += util/sigchain.h
 LIB_H += util/symbol.h
@@ -322,12 +323,15 @@
 LIB_OBJS += util/quote.o
 LIB_OBJS += util/strbuf.o
 LIB_OBJS += util/string.o
+LIB_OBJS += util/strlist.o
 LIB_OBJS += util/usage.o
 LIB_OBJS += util/wrapper.o
 LIB_OBJS += util/sigchain.o
 LIB_OBJS += util/symbol.o
 LIB_OBJS += util/color.o
 LIB_OBJS += util/pager.o
+LIB_OBJS += util/header.o
+LIB_OBJS += util/callchain.o
 
 BUILTIN_OBJS += builtin-annotate.o
 BUILTIN_OBJS += builtin-help.o
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 7e58e3a..722c0f5 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -855,7 +855,7 @@
 		     total_unknown = 0;
 
 static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	char level;
 	int show = 0;
@@ -1013,10 +1013,10 @@
 static int
 process_event(event_t *event, unsigned long offset, unsigned long head)
 {
-	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
-		return process_overflow_event(event, offset, head);
-
 	switch (event->header.type) {
+	case PERF_EVENT_SAMPLE:
+		return process_sample_event(event, offset, head);
+
 	case PERF_EVENT_MMAP:
 		return process_mmap_event(event, offset, head);
 
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index d7ebbd7..d18546f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -14,6 +14,8 @@
 #include "util/parse-events.h"
 #include "util/string.h"
 
+#include "util/header.h"
+
 #include <unistd.h>
 #include <sched.h>
 
@@ -39,6 +41,8 @@
 static int			append_file			= 0;
 static int			call_graph			= 0;
 static int			verbose				= 0;
+static int			inherit_stat			= 0;
+static int			no_samples			= 0;
 
 static long			samples;
 static struct timeval		last_read;
@@ -52,7 +56,8 @@
 static int			nr_cpu;
 
 static int			file_new = 1;
-static struct perf_file_header	file_header;
+
+struct perf_header		*header;
 
 struct mmap_event {
 	struct perf_event_header	header;
@@ -306,12 +311,11 @@
 			continue;
 		pbf += n + 3;
 		if (*pbf == 'x') { /* vm_exec */
-			char *execname = strrchr(bf, ' ');
+			char *execname = strchr(bf, '/');
 
-			if (execname == NULL || execname[1] != '/')
+			if (execname == NULL)
 				continue;
 
-			execname += 1;
 			size = strlen(execname);
 			execname[size - 1] = '\0'; /* Remove \n */
 			memcpy(mmap_ev.filename, execname, size);
@@ -329,7 +333,7 @@
 	fclose(fp);
 }
 
-static void synthesize_samples(void)
+static void synthesize_all(void)
 {
 	DIR *proc;
 	struct dirent dirent, *next;
@@ -353,10 +357,35 @@
 
 static int group_fd;
 
+static struct perf_header_attr *get_header_attr(struct perf_counter_attr *a, int nr)
+{
+	struct perf_header_attr *h_attr;
+
+	if (nr < header->attrs) {
+		h_attr = header->attr[nr];
+	} else {
+		h_attr = perf_header_attr__new(a);
+		perf_header__add_attr(header, h_attr);
+	}
+
+	return h_attr;
+}
+
 static void create_counter(int counter, int cpu, pid_t pid)
 {
 	struct perf_counter_attr *attr = attrs + counter;
-	int track = 1;
+	struct perf_header_attr *h_attr;
+	int track = !counter; /* only the first counter needs these */
+	struct {
+		u64 count;
+		u64 time_enabled;
+		u64 time_running;
+		u64 id;
+	} read_data;
+
+	attr->read_format	= PERF_FORMAT_TOTAL_TIME_ENABLED |
+				  PERF_FORMAT_TOTAL_TIME_RUNNING |
+				  PERF_FORMAT_ID;
 
 	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
 
@@ -366,25 +395,20 @@
 		attr->sample_freq	= freq;
 	}
 
+	if (no_samples)
+		attr->sample_freq = 0;
+
+	if (inherit_stat)
+		attr->inherit_stat = 1;
+
 	if (call_graph)
 		attr->sample_type	|= PERF_SAMPLE_CALLCHAIN;
 
-	if (file_new) {
-		file_header.sample_type = attr->sample_type;
-	} else {
-		if (file_header.sample_type != attr->sample_type) {
-			fprintf(stderr, "incompatible append\n");
-			exit(-1);
-		}
-	}
-
 	attr->mmap		= track;
 	attr->comm		= track;
 	attr->inherit		= (cpu < 0) && inherit;
 	attr->disabled		= 1;
 
-	track = 0; /* only the first counter needs these */
-
 try_again:
 	fd[nr_cpu][counter] = sys_perf_counter_open(attr, pid, cpu, group_fd, 0);
 
@@ -415,6 +439,22 @@
 		exit(-1);
 	}
 
+	h_attr = get_header_attr(attr, counter);
+
+	if (!file_new) {
+		if (memcmp(&h_attr->attr, attr, sizeof(*attr))) {
+			fprintf(stderr, "incompatible append\n");
+			exit(-1);
+		}
+	}
+
+	if (read(fd[nr_cpu][counter], &read_data, sizeof(read_data)) == -1) {
+		perror("Unable to read perf file descriptor\n");
+		exit(-1);
+	}
+
+	perf_header_attr__add_id(h_attr, read_data.id);
+
 	assert(fd[nr_cpu][counter] >= 0);
 	fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK);
 
@@ -445,11 +485,6 @@
 {
 	int counter;
 
-	if (pid > 0) {
-		pid_synthesize_comm_event(pid, 0);
-		pid_synthesize_mmap_samples(pid);
-	}
-
 	group_fd = -1;
 	for (counter = 0; counter < nr_counters; counter++)
 		create_counter(counter, cpu, pid);
@@ -459,17 +494,16 @@
 
 static void atexit_header(void)
 {
-	file_header.data_size += bytes_written;
+	header->data_size += bytes_written;
 
-	if (pwrite(output, &file_header, sizeof(file_header), 0) == -1)
-		perror("failed to write on file headers");
+	perf_header__write(header, output);
 }
 
 static int __cmd_record(int argc, const char **argv)
 {
 	int i, counter;
 	struct stat st;
-	pid_t pid;
+	pid_t pid = 0;
 	int flags;
 	int ret;
 
@@ -500,22 +534,31 @@
 		exit(-1);
 	}
 
-	if (!file_new) {
-		if (read(output, &file_header, sizeof(file_header)) == -1) {
-			perror("failed to read file headers");
-			exit(-1);
-		}
-
-		lseek(output, file_header.data_size, SEEK_CUR);
-	}
+	if (!file_new)
+		header = perf_header__read(output);
+	else
+		header = perf_header__new();
 
 	atexit(atexit_header);
 
 	if (!system_wide) {
-		open_counters(-1, target_pid != -1 ? target_pid : getpid());
+		pid = target_pid;
+		if (pid == -1)
+			pid = getpid();
+
+		open_counters(-1, pid);
 	} else for (i = 0; i < nr_cpus; i++)
 		open_counters(i, target_pid);
 
+	if (file_new)
+		perf_header__write(header, output);
+
+	if (!system_wide) {
+		pid_synthesize_comm_event(pid, 0);
+		pid_synthesize_mmap_samples(pid);
+	} else
+		synthesize_all();
+
 	if (target_pid == -1 && argc) {
 		pid = fork();
 		if (pid < 0)
@@ -539,10 +582,7 @@
 		}
 	}
 
-	if (system_wide)
-		synthesize_samples();
-
-	while (!done) {
+	for (;;) {
 		int hits = samples;
 
 		for (i = 0; i < nr_cpu; i++) {
@@ -550,8 +590,11 @@
 				mmap_read(&mmap_array[i][counter]);
 		}
 
-		if (hits == samples)
+		if (hits == samples) {
+			if (done)
+				break;
 			ret = poll(event_array, nr_poll, 100);
+		}
 	}
 
 	/*
@@ -600,6 +643,10 @@
 		    "do call-graph (stack chain/backtrace) recording"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
+	OPT_BOOLEAN('s', "stat", &inherit_stat,
+		    "per thread counts"),
+	OPT_BOOLEAN('n', "no-samples", &no_samples,
+		    "don't sample"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5eb5566..135b783 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -15,8 +15,11 @@
 #include "util/rbtree.h"
 #include "util/symbol.h"
 #include "util/string.h"
+#include "util/callchain.h"
+#include "util/strlist.h"
 
 #include "perf.h"
+#include "util/header.h"
 
 #include "util/parse-options.h"
 #include "util/parse-events.h"
@@ -30,6 +33,8 @@
 
 static char		default_sort_order[] = "comm,dso";
 static char		*sort_order = default_sort_order;
+static char		*dso_list_str, *comm_list_str, *sym_list_str;
+static struct strlist	*dso_list, *comm_list, *sym_list;
 
 static int		input;
 static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
@@ -51,6 +56,9 @@
 static regex_t		parent_regex;
 
 static int		exclude_other = 1;
+static int		callchain;
+
+static u64		sample_type;
 
 struct ip_event {
 	struct perf_event_header header;
@@ -59,11 +67,6 @@
 	unsigned char __more_data[];
 };
 
-struct ip_callchain {
-	u64 nr;
-	u64 ips[0];
-};
-
 struct mmap_event {
 	struct perf_event_header header;
 	u32 pid, tid;
@@ -97,6 +100,13 @@
 	u64 lost;
 };
 
+struct read_event {
+	struct perf_event_header header;
+	u32 pid,tid;
+	u64 value;
+	u64 format[3];
+};
+
 typedef union event_union {
 	struct perf_event_header	header;
 	struct ip_event			ip;
@@ -105,6 +115,7 @@
 	struct fork_event		fork;
 	struct period_event		period;
 	struct lost_event		lost;
+	struct read_event		read;
 } event_t;
 
 static LIST_HEAD(dsos);
@@ -229,7 +240,7 @@
 
 static inline int is_anon_memory(const char *filename)
 {
-     return strcmp(filename, "//anon") == 0;
+	return strcmp(filename, "//anon") == 0;
 }
 
 static struct map *map__new(struct mmap_event *event)
@@ -400,9 +411,27 @@
 
 	list_for_each_entry_safe(pos, tmp, &self->maps, node) {
 		if (map__overlap(pos, map)) {
-			list_del_init(&pos->node);
-			/* XXX leaks dsos */
-			free(pos);
+			if (verbose >= 2) {
+				printf("overlapping maps:\n");
+				map__fprintf(map, stdout);
+				map__fprintf(pos, stdout);
+			}
+
+			if (map->start <= pos->start && map->end > pos->start)
+				pos->start = map->end;
+
+			if (map->end >= pos->end && map->start < pos->end)
+				pos->end = map->start;
+
+			if (verbose >= 2) {
+				printf("after collision:\n");
+				map__fprintf(pos, stdout);
+			}
+
+			if (pos->start >= pos->end) {
+				list_del_init(&pos->node);
+				free(pos);
+			}
 		}
 	}
 
@@ -464,17 +493,19 @@
 static struct rb_root hist;
 
 struct hist_entry {
-	struct rb_node	 rb_node;
+	struct rb_node		rb_node;
 
-	struct thread	 *thread;
-	struct map	 *map;
-	struct dso	 *dso;
-	struct symbol	 *sym;
-	struct symbol	 *parent;
-	u64		 ip;
-	char		 level;
+	struct thread		*thread;
+	struct map		*map;
+	struct dso		*dso;
+	struct symbol		*sym;
+	struct symbol		*parent;
+	u64			ip;
+	char			level;
+	struct callchain_node	callchain;
+	struct rb_root		sorted_chain;
 
-	u64		 count;
+	u64			count;
 };
 
 /*
@@ -745,6 +776,48 @@
 }
 
 static size_t
+callchain__fprintf(FILE *fp, struct callchain_node *self, u64 total_samples)
+{
+	struct callchain_list *chain;
+	size_t ret = 0;
+
+	if (!self)
+		return 0;
+
+	ret += callchain__fprintf(fp, self->parent, total_samples);
+
+
+	list_for_each_entry(chain, &self->val, list)
+		ret += fprintf(fp, "                %p\n", (void *)chain->ip);
+
+	return ret;
+}
+
+static size_t
+hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
+			      u64 total_samples)
+{
+	struct rb_node *rb_node;
+	struct callchain_node *chain;
+	size_t ret = 0;
+
+	rb_node = rb_first(&self->sorted_chain);
+	while (rb_node) {
+		double percent;
+
+		chain = rb_entry(rb_node, struct callchain_node, rb_node);
+		percent = chain->hit * 100.0 / total_samples;
+		ret += fprintf(fp, "           %6.2f%%\n", percent);
+		ret += callchain__fprintf(fp, chain, total_samples);
+		ret += fprintf(fp, "\n");
+		rb_node = rb_next(rb_node);
+	}
+
+	return ret;
+}
+
+
+static size_t
 hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
 {
 	struct sort_entry *se;
@@ -784,6 +857,9 @@
 
 	ret += fprintf(fp, "\n");
 
+	if (callchain)
+		hist_entry_callchain__fprintf(fp, self, total_samples);
+
 	return ret;
 }
 
@@ -797,7 +873,7 @@
 {
 	struct dso *dso = dsop ? *dsop : NULL;
 	struct map *map = mapp ? *mapp : NULL;
-	uint64_t ip = *ipp;
+	u64 ip = *ipp;
 
 	if (!thread)
 		return NULL;
@@ -814,7 +890,6 @@
 			*mapp = map;
 got_map:
 		ip = map->map_ip(map, ip);
-		*ipp  = ip;
 
 		dso = map->dso;
 	} else {
@@ -828,6 +903,8 @@
 		dso = kernel_dso;
 	}
 	dprintf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
+	dprintf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
+	*ipp  = ip;
 
 	if (dsop)
 		*dsop = dso;
@@ -867,6 +944,7 @@
 		.level	= level,
 		.count	= count,
 		.parent = NULL,
+		.sorted_chain = RB_ROOT
 	};
 	int cmp;
 
@@ -909,6 +987,8 @@
 
 		if (!cmp) {
 			he->count += count;
+			if (callchain)
+				append_chain(&he->callchain, chain);
 			return 0;
 		}
 
@@ -922,6 +1002,10 @@
 	if (!he)
 		return -ENOMEM;
 	*he = entry;
+	if (callchain) {
+		callchain_init(&he->callchain);
+		append_chain(&he->callchain, chain);
+	}
 	rb_link_node(&he->rb_node, parent, p);
 	rb_insert_color(&he->rb_node, &hist);
 
@@ -998,6 +1082,9 @@
 	struct rb_node *parent = NULL;
 	struct hist_entry *iter;
 
+	if (callchain)
+		sort_chain_to_rbtree(&he->sorted_chain, &he->callchain);
+
 	while (*p != NULL) {
 		parent = *p;
 		iter = rb_entry(parent, struct hist_entry, rb_node);
@@ -1115,7 +1202,7 @@
 }
 
 static int
-process_overflow_event(event_t *event, unsigned long offset, unsigned long head)
+process_sample_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	char level;
 	int show = 0;
@@ -1127,12 +1214,12 @@
 	void *more_data = event->ip.__more_data;
 	struct ip_callchain *chain = NULL;
 
-	if (event->header.type & PERF_SAMPLE_PERIOD) {
+	if (sample_type & PERF_SAMPLE_PERIOD) {
 		period = *(u64 *)more_data;
 		more_data += sizeof(u64);
 	}
 
-	dprintf("%p [%p]: PERF_EVENT (IP, %d): %d: %p period: %Ld\n",
+	dprintf("%p [%p]: PERF_EVENT_SAMPLE (IP, %d): %d: %p period: %Ld\n",
 		(void *)(offset + head),
 		(void *)(long)(event->header.size),
 		event->header.misc,
@@ -1140,7 +1227,7 @@
 		(void *)(long)ip,
 		(long long)period);
 
-	if (event->header.type & PERF_SAMPLE_CALLCHAIN) {
+	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
 		int i;
 
 		chain = (void *)more_data;
@@ -1166,6 +1253,9 @@
 		return -1;
 	}
 
+	if (comm_list && !strlist__has_entry(comm_list, thread->comm))
+		return 0;
+
 	if (event->header.misc & PERF_EVENT_MISC_KERNEL) {
 		show = SHOW_KERNEL;
 		level = 'k';
@@ -1188,6 +1278,12 @@
 	if (show & show_mask) {
 		struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
 
+		if (dso_list && dso && dso->name && !strlist__has_entry(dso_list, dso->name))
+			return 0;
+
+		if (sym_list && sym && !strlist__has_entry(sym_list, sym->name))
+			return 0;
+
 		if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
 			eprintf("problem incrementing symbol count, skipping event\n");
 			return -1;
@@ -1328,14 +1424,27 @@
 }
 
 static int
+process_read_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	dprintf("%p [%p]: PERF_EVENT_READ: %d %d %Lu\n",
+			(void *)(offset + head),
+			(void *)(long)(event->header.size),
+			event->read.pid,
+			event->read.tid,
+			event->read.value);
+
+	return 0;
+}
+
+static int
 process_event(event_t *event, unsigned long offset, unsigned long head)
 {
 	trace_event(event);
 
-	if (event->header.misc & PERF_EVENT_MISC_OVERFLOW)
-		return process_overflow_event(event, offset, head);
-
 	switch (event->header.type) {
+	case PERF_EVENT_SAMPLE:
+		return process_sample_event(event, offset, head);
+
 	case PERF_EVENT_MMAP:
 		return process_mmap_event(event, offset, head);
 
@@ -1351,6 +1460,9 @@
 	case PERF_EVENT_LOST:
 		return process_lost_event(event, offset, head);
 
+	case PERF_EVENT_READ:
+		return process_read_event(event, offset, head);
+
 	/*
 	 * We dont process them right now but they are fine:
 	 */
@@ -1366,13 +1478,30 @@
 	return 0;
 }
 
-static struct perf_file_header		file_header;
+static struct perf_header	*header;
+
+static u64 perf_header__sample_type(void)
+{
+	u64 sample_type = 0;
+	int i;
+
+	for (i = 0; i < header->attrs; i++) {
+		struct perf_header_attr *attr = header->attr[i];
+
+		if (!sample_type)
+			sample_type = attr->attr.sample_type;
+		else if (sample_type != attr->attr.sample_type)
+			die("non matching sample_type");
+	}
+
+	return sample_type;
+}
 
 static int __cmd_report(void)
 {
 	int ret, rc = EXIT_FAILURE;
 	unsigned long offset = 0;
-	unsigned long head = sizeof(file_header);
+	unsigned long head, shift;
 	struct stat stat;
 	event_t *event;
 	uint32_t size;
@@ -1400,13 +1529,12 @@
 		exit(0);
 	}
 
-	if (read(input, &file_header, sizeof(file_header)) == -1) {
-		perror("failed to read file headers");
-		exit(-1);
-	}
+	header = perf_header__read(input);
+	head = header->data_offset;
 
-	if (sort__has_parent &&
-	    !(file_header.sample_type & PERF_SAMPLE_CALLCHAIN)) {
+	sample_type = perf_header__sample_type();
+
+	if (sort__has_parent && !(sample_type & PERF_SAMPLE_CALLCHAIN)) {
 		fprintf(stderr, "selected --sort parent, but no callchain data\n");
 		exit(-1);
 	}
@@ -1426,6 +1554,11 @@
 		cwd = NULL;
 		cwdlen = 0;
 	}
+
+	shift = page_size * (head / page_size);
+	offset += shift;
+	head -= shift;
+
 remap:
 	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
 			   MAP_SHARED, input, offset);
@@ -1442,9 +1575,10 @@
 		size = 8;
 
 	if (head + event->header.size >= page_size * mmap_window) {
-		unsigned long shift = page_size * (head / page_size);
 		int ret;
 
+		shift = page_size * (head / page_size);
+
 		ret = munmap(buf, page_size * mmap_window);
 		assert(ret == 0);
 
@@ -1482,7 +1616,7 @@
 
 	head += size;
 
-	if (offset + head >= sizeof(file_header) + file_header.data_size)
+	if (offset + head >= header->data_offset + header->data_size)
 		goto done;
 
 	if (offset + head < stat.st_size)
@@ -1536,6 +1670,13 @@
 		   "regex filter to identify parent, see: '--sort parent'"),
 	OPT_BOOLEAN('x', "exclude-other", &exclude_other,
 		    "Only display entries with parent-match"),
+	OPT_BOOLEAN('c', "callchain", &callchain, "Display callchains"),
+	OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]",
+		   "only consider symbols in these dsos"),
+	OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]",
+		   "only consider symbols in these comms"),
+	OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]",
+		   "only consider these symbols"),
 	OPT_END()
 };
 
@@ -1554,6 +1695,19 @@
 	free(str);
 }
 
+static void setup_list(struct strlist **list, const char *list_str,
+		       const char *list_name)
+{
+	if (list_str) {
+		*list = strlist__new(true, list_str);
+		if (!*list) {
+			fprintf(stderr, "problems parsing %s list\n",
+				list_name);
+			exit(129);
+		}
+	}
+}
+
 int cmd_report(int argc, const char **argv, const char *prefix)
 {
 	symbol__init();
@@ -1575,6 +1729,10 @@
 	if (argc)
 		usage_with_options(report_usage, options);
 
+	setup_list(&dso_list, dso_list_str, "dso");
+	setup_list(&comm_list, comm_list_str, "comm");
+	setup_list(&sym_list, sym_list_str, "symbol");
+
 	setup_pager();
 
 	return __cmd_report();
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 6d3eeac..2e03524 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -32,6 +32,7 @@
  *   Wu Fengguang <fengguang.wu@intel.com>
  *   Mike Galbraith <efault@gmx.de>
  *   Paul Mackerras <paulus@samba.org>
+ *   Jaswinder Singh Rajput <jaswinder@kernel.org>
  *
  * Released under the GPL v2. (and only v2, not any later version)
  */
@@ -45,7 +46,7 @@
 #include <sys/prctl.h>
 #include <math.h>
 
-static struct perf_counter_attr default_attrs[MAX_COUNTERS] = {
+static struct perf_counter_attr default_attrs[] = {
 
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK	},
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
@@ -59,42 +60,28 @@
 
 };
 
+#define MAX_RUN			100
+
 static int			system_wide			=  0;
-static int			inherit				=  1;
 static int			verbose				=  0;
+static int			nr_cpus				=  0;
+static int			run_idx				=  0;
+
+static int			run_count			=  1;
+static int			inherit				=  1;
+static int			scale				=  1;
+static int			target_pid			= -1;
+static int			null_run			=  0;
 
 static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
 
-static int			target_pid			= -1;
-static int			nr_cpus				=  0;
-static unsigned int		page_size;
-
-static int			scale				=  1;
-
-static const unsigned int default_count[] = {
-	1000000,
-	1000000,
-	  10000,
-	  10000,
-	1000000,
-	  10000,
-};
-
-#define MAX_RUN 100
-
-static int			run_count		=  1;
-static int			run_idx			=  0;
-
-static u64			event_res[MAX_RUN][MAX_COUNTERS][3];
-static u64			event_scaled[MAX_RUN][MAX_COUNTERS];
-
-//static u64			event_hist[MAX_RUN][MAX_COUNTERS][3];
-
-
 static u64			runtime_nsecs[MAX_RUN];
 static u64			walltime_nsecs[MAX_RUN];
 static u64			runtime_cycles[MAX_RUN];
 
+static u64			event_res[MAX_RUN][MAX_COUNTERS][3];
+static u64			event_scaled[MAX_RUN][MAX_COUNTERS];
+
 static u64			event_res_avg[MAX_COUNTERS][3];
 static u64			event_res_noise[MAX_COUNTERS][3];
 
@@ -109,7 +96,10 @@
 static u64			runtime_cycles_avg;
 static u64			runtime_cycles_noise;
 
-static void create_perf_stat_counter(int counter)
+#define ERR_PERF_OPEN \
+"Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n"
+
+static void create_perf_stat_counter(int counter, int pid)
 {
 	struct perf_counter_attr *attr = attrs + counter;
 
@@ -119,20 +109,21 @@
 
 	if (system_wide) {
 		int cpu;
-		for (cpu = 0; cpu < nr_cpus; cpu ++) {
+		for (cpu = 0; cpu < nr_cpus; cpu++) {
 			fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0);
-			if (fd[cpu][counter] < 0 && verbose) {
-				printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[cpu][counter], strerror(errno));
-			}
+			if (fd[cpu][counter] < 0 && verbose)
+				fprintf(stderr, ERR_PERF_OPEN, counter,
+					fd[cpu][counter], strerror(errno));
 		}
 	} else {
-		attr->inherit	= inherit;
-		attr->disabled	= 1;
+		attr->inherit	     = inherit;
+		attr->disabled	     = 1;
+		attr->enable_on_exec = 1;
 
-		fd[0][counter] = sys_perf_counter_open(attr, 0, -1, -1, 0);
-		if (fd[0][counter] < 0 && verbose) {
-			printf("Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n", counter, fd[0][counter], strerror(errno));
-		}
+		fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0);
+		if (fd[0][counter] < 0 && verbose)
+			fprintf(stderr, ERR_PERF_OPEN, counter,
+				fd[0][counter], strerror(errno));
 	}
 }
 
@@ -168,7 +159,7 @@
 	count[0] = count[1] = count[2] = 0;
 
 	nv = scale ? 3 : 1;
-	for (cpu = 0; cpu < nr_cpus; cpu ++) {
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
 		if (fd[cpu][counter] < 0)
 			continue;
 
@@ -215,32 +206,67 @@
 	int status = 0;
 	int counter;
 	int pid;
+	int child_ready_pipe[2], go_pipe[2];
+	char buf;
 
 	if (!system_wide)
 		nr_cpus = 1;
 
-	for (counter = 0; counter < nr_counters; counter++)
-		create_perf_stat_counter(counter);
-
-	/*
-	 * Enable counters and exec the command:
-	 */
-	t0 = rdclock();
-	prctl(PR_TASK_PERF_COUNTERS_ENABLE);
+	if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) {
+		perror("failed to create pipes");
+		exit(1);
+	}
 
 	if ((pid = fork()) < 0)
 		perror("failed to fork");
 
 	if (!pid) {
-		if (execvp(argv[0], (char **)argv)) {
-			perror(argv[0]);
-			exit(-1);
-		}
+		close(child_ready_pipe[0]);
+		close(go_pipe[1]);
+		fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC);
+
+		/*
+		 * Do a dummy execvp to get the PLT entry resolved,
+		 * so we avoid the resolver overhead on the real
+		 * execvp call.
+		 */
+		execvp("", (char **)argv);
+
+		/*
+		 * Tell the parent we're ready to go
+		 */
+		close(child_ready_pipe[1]);
+
+		/*
+		 * Wait until the parent tells us to go.
+		 */
+		read(go_pipe[0], &buf, 1);
+
+		execvp(argv[0], (char **)argv);
+
+		perror(argv[0]);
+		exit(-1);
 	}
 
+	/*
+	 * Wait for the child to be ready to exec.
+	 */
+	close(child_ready_pipe[1]);
+	close(go_pipe[0]);
+	read(child_ready_pipe[0], &buf, 1);
+	close(child_ready_pipe[0]);
+
+	for (counter = 0; counter < nr_counters; counter++)
+		create_perf_stat_counter(counter, pid);
+
+	/*
+	 * Enable counters and exec the command:
+	 */
+	t0 = rdclock();
+
+	close(go_pipe[1]);
 	wait(&status);
 
-	prctl(PR_TASK_PERF_COUNTERS_DISABLE);
 	t1 = rdclock();
 
 	walltime_nsecs[run_idx] = t1 - t0;
@@ -262,7 +288,7 @@
 {
 	double msecs = (double)count[0] / 1000000;
 
-	fprintf(stderr, " %14.6f  %-20s", msecs, event_name(counter));
+	fprintf(stderr, " %14.6f  %-24s", msecs, event_name(counter));
 
 	if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
 		attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
@@ -276,7 +302,7 @@
 
 static void abs_printout(int counter, u64 *count, u64 *noise)
 {
-	fprintf(stderr, " %14Ld  %-20s", count[0], event_name(counter));
+	fprintf(stderr, " %14Ld  %-24s", count[0], event_name(counter));
 
 	if (runtime_cycles_avg &&
 		attrs[counter].type == PERF_TYPE_HARDWARE &&
@@ -306,7 +332,7 @@
 	scaled = event_scaled_avg[counter];
 
 	if (scaled == -1) {
-		fprintf(stderr, " %14s  %-20s\n",
+		fprintf(stderr, " %14s  %-24s\n",
 			"<not counted>", event_name(counter));
 		return;
 	}
@@ -364,8 +390,11 @@
 				event_res_avg[j]+1, event_res[i][j]+1);
 			update_avg("counter/2", j,
 				event_res_avg[j]+2, event_res[i][j]+2);
-			update_avg("scaled", j,
-				event_scaled_avg + j, event_scaled[i]+j);
+			if (event_scaled[i][j] != -1)
+				update_avg("scaled", j,
+					event_scaled_avg + j, event_scaled[i]+j);
+			else
+				event_scaled_avg[j] = -1;
 		}
 	}
 	runtime_nsecs_avg /= run_count;
@@ -429,11 +458,14 @@
 	for (counter = 0; counter < nr_counters; counter++)
 		print_counter(counter);
 
-
 	fprintf(stderr, "\n");
-	fprintf(stderr, " %14.9f  seconds time elapsed.\n",
+	fprintf(stderr, " %14.9f  seconds time elapsed",
 			(double)walltime_nsecs_avg/1e9);
-	fprintf(stderr, "\n");
+	if (run_count > 1) {
+		fprintf(stderr, "   ( +- %7.3f%% )",
+			100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg);
+	}
+	fprintf(stderr, "\n\n");
 }
 
 static volatile int signr = -1;
@@ -466,13 +498,15 @@
 	OPT_INTEGER('p', "pid", &target_pid,
 		    "stat events on existing pid"),
 	OPT_BOOLEAN('a', "all-cpus", &system_wide,
-			    "system-wide collection from all CPUs"),
+		    "system-wide collection from all CPUs"),
 	OPT_BOOLEAN('S', "scale", &scale,
-			    "scale/normalize counters"),
+		    "scale/normalize counters"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_INTEGER('r', "repeat", &run_count,
 		    "repeat command and print average + stddev (max: 100)"),
+	OPT_BOOLEAN('n', "null", &null_run,
+		    "null run - dont start any counters"),
 	OPT_END()
 };
 
@@ -480,18 +514,17 @@
 {
 	int status;
 
-	page_size = sysconf(_SC_PAGE_SIZE);
-
-	memcpy(attrs, default_attrs, sizeof(attrs));
-
 	argc = parse_options(argc, argv, options, stat_usage, 0);
 	if (!argc)
 		usage_with_options(stat_usage, options);
 	if (run_count <= 0 || run_count > MAX_RUN)
 		usage_with_options(stat_usage, options);
 
-	if (!nr_counters)
-		nr_counters = 8;
+	/* Set attrs and nr_counters if no event is selected and !null_run */
+	if (!null_run && !nr_counters) {
+		memcpy(attrs, default_attrs, sizeof(default_attrs));
+		nr_counters = ARRAY_SIZE(default_attrs);
+	}
 
 	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
 	assert(nr_cpus <= MAX_NR_CPUS);
@@ -511,7 +544,7 @@
 	status = 0;
 	for (run_idx = 0; run_idx < run_count; run_idx++) {
 		if (run_count != 1 && verbose)
-			fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx+1);
+			fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
 		status = run_perf_stat(argc, argv);
 	}
 
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 5352b5e..cf0d21f 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -392,11 +392,11 @@
 	samples--;
 }
 
-static void process_event(u64 ip, int counter)
+static void process_event(u64 ip, int counter, int user)
 {
 	samples++;
 
-	if (ip < min_ip || ip > max_ip) {
+	if (user) {
 		userspace_samples++;
 		return;
 	}
@@ -509,9 +509,10 @@
 
 		old += size;
 
-		if (event->header.misc & PERF_EVENT_MISC_OVERFLOW) {
-			if (event->header.type & PERF_SAMPLE_IP)
-				process_event(event->ip.ip, md->counter);
+		if (event->header.type == PERF_EVENT_SAMPLE) {
+			int user =
+	(event->header.misc & PERF_EVENT_MISC_CPUMODE_MASK) == PERF_EVENT_MISC_USER;
+			process_event(event->ip.ip, md->counter, user);
 		}
 	}
 
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ceb68aa..ce39419 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -25,7 +25,7 @@
 #include <sys/syscall.h>
 
 #include "../../include/linux/perf_counter.h"
-#include "types.h"
+#include "util/types.h"
 
 /*
  * prctl(PR_TASK_PERF_COUNTERS_DISABLE) will (cheaply) disable all
@@ -72,10 +72,9 @@
 #define MAX_COUNTERS			256
 #define MAX_NR_CPUS			256
 
-struct perf_file_header {
-	u64	version;
-	u64	sample_type;
-	u64	data_size;
+struct ip_callchain {
+	u64 nr;
+	u64 ips[0];
 };
 
 #endif
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
new file mode 100644
index 0000000..ad3c285
--- /dev/null
+++ b/tools/perf/util/callchain.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Handle the callchains from the stream in an ad-hoc radix tree and then
+ * sort them in an rbtree.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <errno.h>
+
+#include "callchain.h"
+
+
+static void rb_insert_callchain(struct rb_root *root, struct callchain_node *chain)
+{
+	struct rb_node **p = &root->rb_node;
+	struct rb_node *parent = NULL;
+	struct callchain_node *rnode;
+
+	while (*p) {
+		parent = *p;
+		rnode = rb_entry(parent, struct callchain_node, rb_node);
+
+		if (rnode->hit < chain->hit)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&chain->rb_node, parent, p);
+	rb_insert_color(&chain->rb_node, root);
+}
+
+/*
+ * Once we get every callchains from the stream, we can now
+ * sort them by hit
+ */
+void sort_chain_to_rbtree(struct rb_root *rb_root, struct callchain_node *node)
+{
+	struct callchain_node *child;
+
+	list_for_each_entry(child, &node->children, brothers)
+		sort_chain_to_rbtree(rb_root, child);
+
+	if (node->hit)
+		rb_insert_callchain(rb_root, node);
+}
+
+static struct callchain_node *create_child(struct callchain_node *parent)
+{
+	struct callchain_node *new;
+
+	new = malloc(sizeof(*new));
+	if (!new) {
+		perror("not enough memory to create child for code path tree");
+		return NULL;
+	}
+	new->parent = parent;
+	INIT_LIST_HEAD(&new->children);
+	INIT_LIST_HEAD(&new->val);
+	list_add_tail(&new->brothers, &parent->children);
+
+	return new;
+}
+
+static void
+fill_node(struct callchain_node *node, struct ip_callchain *chain, int start)
+{
+	int i;
+
+	for (i = start; i < chain->nr; i++) {
+		struct callchain_list *call;
+
+		call = malloc(sizeof(*chain));
+		if (!call) {
+			perror("not enough memory for the code path tree");
+			return;
+		}
+		call->ip = chain->ips[i];
+		list_add_tail(&call->list, &node->val);
+	}
+	node->val_nr = i - start;
+}
+
+static void add_child(struct callchain_node *parent, struct ip_callchain *chain)
+{
+	struct callchain_node *new;
+
+	new = create_child(parent);
+	fill_node(new, chain, parent->val_nr);
+
+	new->hit = 1;
+}
+
+static void
+split_add_child(struct callchain_node *parent, struct ip_callchain *chain,
+		struct callchain_list *to_split, int idx)
+{
+	struct callchain_node *new;
+
+	/* split */
+	new = create_child(parent);
+	list_move_tail(&to_split->list, &new->val);
+	new->hit = parent->hit;
+	parent->hit = 0;
+	parent->val_nr = idx;
+
+	/* create the new one */
+	add_child(parent, chain);
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+		int start);
+
+static int
+__append_chain_children(struct callchain_node *root, struct ip_callchain *chain)
+{
+	struct callchain_node *rnode;
+
+	/* lookup in childrens */
+	list_for_each_entry(rnode, &root->children, brothers) {
+		int ret = __append_chain(rnode, chain, root->val_nr);
+		if (!ret)
+			return 0;
+	}
+	return -1;
+}
+
+static int
+__append_chain(struct callchain_node *root, struct ip_callchain *chain,
+		int start)
+{
+	struct callchain_list *cnode;
+	int i = start;
+	bool found = false;
+
+	/* lookup in the current node */
+	list_for_each_entry(cnode, &root->val, list) {
+		if (cnode->ip != chain->ips[i++])
+			break;
+		if (!found)
+			found = true;
+		if (i == chain->nr)
+			break;
+	}
+
+	/* matches not, relay on the parent */
+	if (!found)
+		return -1;
+
+	/* we match only a part of the node. Split it and add the new chain */
+	if (i < root->val_nr) {
+		split_add_child(root, chain, cnode, i);
+		return 0;
+	}
+
+	/* we match 100% of the path, increment the hit */
+	if (i == root->val_nr) {
+		root->hit++;
+		return 0;
+	}
+
+	return __append_chain_children(root, chain);
+}
+
+void append_chain(struct callchain_node *root, struct ip_callchain *chain)
+{
+	if (__append_chain_children(root, chain) == -1)
+		add_child(root, chain);
+}
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
new file mode 100644
index 0000000..fa1cd2f
--- /dev/null
+++ b/tools/perf/util/callchain.h
@@ -0,0 +1,33 @@
+#ifndef __PERF_CALLCHAIN_H
+#define __PERF_CALLCHAIN_H
+
+#include "../perf.h"
+#include "list.h"
+#include "rbtree.h"
+
+
+struct callchain_node {
+	struct callchain_node	*parent;
+	struct list_head	brothers;
+	struct list_head 	children;
+	struct list_head 	val;
+	struct rb_node		rb_node;
+	int			val_nr;
+	int			hit;
+};
+
+struct callchain_list {
+	unsigned long		ip;
+	struct list_head	list;
+};
+
+static inline void callchain_init(struct callchain_node *node)
+{
+	INIT_LIST_HEAD(&node->brothers);
+	INIT_LIST_HEAD(&node->children);
+	INIT_LIST_HEAD(&node->val);
+}
+
+void append_chain(struct callchain_node *root, struct ip_callchain *chain);
+void sort_chain_to_rbtree(struct rb_root *rb_root, struct callchain_node *node);
+#endif
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
new file mode 100644
index 0000000..450384b
--- /dev/null
+++ b/tools/perf/util/header.c
@@ -0,0 +1,242 @@
+#include <sys/types.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "util.h"
+#include "header.h"
+
+/*
+ *
+ */
+
+struct perf_header_attr *perf_header_attr__new(struct perf_counter_attr *attr)
+{
+	struct perf_header_attr *self = malloc(sizeof(*self));
+
+	if (!self)
+		die("nomem");
+
+	self->attr = *attr;
+	self->ids = 0;
+	self->size = 1;
+	self->id = malloc(sizeof(u64));
+
+	if (!self->id)
+		die("nomem");
+
+	return self;
+}
+
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id)
+{
+	int pos = self->ids;
+
+	self->ids++;
+	if (self->ids > self->size) {
+		self->size *= 2;
+		self->id = realloc(self->id, self->size * sizeof(u64));
+		if (!self->id)
+			die("nomem");
+	}
+	self->id[pos] = id;
+}
+
+/*
+ *
+ */
+
+struct perf_header *perf_header__new(void)
+{
+	struct perf_header *self = malloc(sizeof(*self));
+
+	if (!self)
+		die("nomem");
+
+	self->frozen = 0;
+
+	self->attrs = 0;
+	self->size = 1;
+	self->attr = malloc(sizeof(void *));
+
+	if (!self->attr)
+		die("nomem");
+
+	self->data_offset = 0;
+	self->data_size = 0;
+
+	return self;
+}
+
+void perf_header__add_attr(struct perf_header *self,
+			   struct perf_header_attr *attr)
+{
+	int pos = self->attrs;
+
+	if (self->frozen)
+		die("frozen");
+
+	self->attrs++;
+	if (self->attrs > self->size) {
+		self->size *= 2;
+		self->attr = realloc(self->attr, self->size * sizeof(void *));
+		if (!self->attr)
+			die("nomem");
+	}
+	self->attr[pos] = attr;
+}
+
+static const char *__perf_magic = "PERFFILE";
+
+#define PERF_MAGIC	(*(u64 *)__perf_magic)
+
+struct perf_file_section {
+	u64 offset;
+	u64 size;
+};
+
+struct perf_file_attr {
+	struct perf_counter_attr	attr;
+	struct perf_file_section	ids;
+};
+
+struct perf_file_header {
+	u64				magic;
+	u64				size;
+	u64				attr_size;
+	struct perf_file_section	attrs;
+	struct perf_file_section	data;
+};
+
+static void do_write(int fd, void *buf, size_t size)
+{
+	while (size) {
+		int ret = write(fd, buf, size);
+
+		if (ret < 0)
+			die("failed to write");
+
+		size -= ret;
+		buf += ret;
+	}
+}
+
+void perf_header__write(struct perf_header *self, int fd)
+{
+	struct perf_file_header f_header;
+	struct perf_file_attr   f_attr;
+	struct perf_header_attr	*attr;
+	int i;
+
+	lseek(fd, sizeof(f_header), SEEK_SET);
+
+
+	for (i = 0; i < self->attrs; i++) {
+		attr = self->attr[i];
+
+		attr->id_offset = lseek(fd, 0, SEEK_CUR);
+		do_write(fd, attr->id, attr->ids * sizeof(u64));
+	}
+
+
+	self->attr_offset = lseek(fd, 0, SEEK_CUR);
+
+	for (i = 0; i < self->attrs; i++) {
+		attr = self->attr[i];
+
+		f_attr = (struct perf_file_attr){
+			.attr = attr->attr,
+			.ids  = {
+				.offset = attr->id_offset,
+				.size   = attr->ids * sizeof(u64),
+			}
+		};
+		do_write(fd, &f_attr, sizeof(f_attr));
+	}
+
+
+	self->data_offset = lseek(fd, 0, SEEK_CUR);
+
+	f_header = (struct perf_file_header){
+		.magic	   = PERF_MAGIC,
+		.size	   = sizeof(f_header),
+		.attr_size = sizeof(f_attr),
+		.attrs = {
+			.offset = self->attr_offset,
+			.size   = self->attrs * sizeof(f_attr),
+		},
+		.data = {
+			.offset = self->data_offset,
+			.size	= self->data_size,
+		},
+	};
+
+	lseek(fd, 0, SEEK_SET);
+	do_write(fd, &f_header, sizeof(f_header));
+	lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+	self->frozen = 1;
+}
+
+static void do_read(int fd, void *buf, size_t size)
+{
+	while (size) {
+		int ret = read(fd, buf, size);
+
+		if (ret < 0)
+			die("failed to read");
+
+		size -= ret;
+		buf += ret;
+	}
+}
+
+struct perf_header *perf_header__read(int fd)
+{
+	struct perf_header	*self = perf_header__new();
+	struct perf_file_header f_header;
+	struct perf_file_attr	f_attr;
+	u64			f_id;
+
+	int nr_attrs, nr_ids, i, j;
+
+	lseek(fd, 0, SEEK_SET);
+	do_read(fd, &f_header, sizeof(f_header));
+
+	if (f_header.magic	!= PERF_MAGIC		||
+	    f_header.size	!= sizeof(f_header)	||
+	    f_header.attr_size	!= sizeof(f_attr))
+		die("incompatible file format");
+
+	nr_attrs = f_header.attrs.size / sizeof(f_attr);
+	lseek(fd, f_header.attrs.offset, SEEK_SET);
+
+	for (i = 0; i < nr_attrs; i++) {
+		struct perf_header_attr *attr;
+		off_t tmp = lseek(fd, 0, SEEK_CUR);
+
+		do_read(fd, &f_attr, sizeof(f_attr));
+
+		attr = perf_header_attr__new(&f_attr.attr);
+
+		nr_ids = f_attr.ids.size / sizeof(u64);
+		lseek(fd, f_attr.ids.offset, SEEK_SET);
+
+		for (j = 0; j < nr_ids; j++) {
+			do_read(fd, &f_id, sizeof(f_id));
+
+			perf_header_attr__add_id(attr, f_id);
+		}
+		perf_header__add_attr(self, attr);
+		lseek(fd, tmp, SEEK_SET);
+	}
+
+	self->data_offset = f_header.data.offset;
+	self->data_size   = f_header.data.size;
+
+	lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+	self->frozen = 1;
+
+	return self;
+}
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
new file mode 100644
index 0000000..b5ef53a
--- /dev/null
+++ b/tools/perf/util/header.h
@@ -0,0 +1,37 @@
+#ifndef _PERF_HEADER_H
+#define _PERF_HEADER_H
+
+#include "../../../include/linux/perf_counter.h"
+#include <sys/types.h>
+#include "types.h"
+
+struct perf_header_attr {
+	struct perf_counter_attr attr;
+	int ids, size;
+	u64 *id;
+	off_t id_offset;
+};
+
+struct perf_header {
+	int frozen;
+	int attrs, size;
+	struct perf_header_attr **attr;
+	off_t attr_offset;
+	u64 data_offset;
+	u64 data_size;
+};
+
+struct perf_header *perf_header__read(int fd);
+void perf_header__write(struct perf_header *self, int fd);
+
+void perf_header__add_attr(struct perf_header *self,
+			   struct perf_header_attr *attr);
+
+struct perf_header_attr *
+perf_header_attr__new(struct perf_counter_attr *attr);
+void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
+
+
+struct perf_header *perf_header__new(void);
+
+#endif /* _PERF_HEADER_H */
diff --git a/tools/perf/util/help.c b/tools/perf/util/help.c
index 6653f7d..17a00e0 100644
--- a/tools/perf/util/help.c
+++ b/tools/perf/util/help.c
@@ -126,21 +126,6 @@
 	    !S_ISREG(st.st_mode))
 		return 0;
 
-#ifdef __MINGW32__
-	/* cannot trust the executable bit, peek into the file instead */
-	char buf[3] = { 0 };
-	int n;
-	int fd = open(name, O_RDONLY);
-	st.st_mode &= ~S_IXUSR;
-	if (fd >= 0) {
-		n = read(fd, buf, 2);
-		if (n == 2)
-			/* DOS executables start with "MZ" */
-			if (!strcmp(buf, "#!") || !strcmp(buf, "MZ"))
-				st.st_mode |= S_IXUSR;
-		close(fd);
-	}
-#endif
 	return st.st_mode & S_IXUSR;
 }
 
diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c
index a28bcca..1915de2 100644
--- a/tools/perf/util/pager.c
+++ b/tools/perf/util/pager.c
@@ -9,7 +9,6 @@
 
 static int spawned_pager;
 
-#ifndef __MINGW32__
 static void pager_preexec(void)
 {
 	/*
@@ -24,7 +23,6 @@
 
 	setenv("LESS", "FRSX", 0);
 }
-#endif
 
 static const char *pager_argv[] = { "sh", "-c", NULL, NULL };
 static struct child_process pager_process;
@@ -70,9 +68,8 @@
 	pager_argv[2] = pager;
 	pager_process.argv = pager_argv;
 	pager_process.in = -1;
-#ifndef __MINGW32__
 	pager_process.preexec_cb = pager_preexec;
-#endif
+
 	if (start_command(&pager_process))
 		return;
 
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 35d04da..4d042f1 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -16,32 +16,28 @@
 	u8	type;
 	u64	config;
 	char	*symbol;
+	char	*alias;
 };
 
-#define C(x, y) .type = PERF_TYPE_##x, .config = PERF_COUNT_##y
-#define CR(x, y) .type = PERF_TYPE_##x, .config = y
+#define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
+#define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
 
 static struct event_symbol event_symbols[] = {
-  { C(HARDWARE, HW_CPU_CYCLES),		"cpu-cycles",		},
-  { C(HARDWARE, HW_CPU_CYCLES),		"cycles",		},
-  { C(HARDWARE, HW_INSTRUCTIONS),	"instructions",		},
-  { C(HARDWARE, HW_CACHE_REFERENCES),	"cache-references",	},
-  { C(HARDWARE, HW_CACHE_MISSES),	"cache-misses",		},
-  { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branch-instructions",	},
-  { C(HARDWARE, HW_BRANCH_INSTRUCTIONS),"branches",		},
-  { C(HARDWARE, HW_BRANCH_MISSES),	"branch-misses",	},
-  { C(HARDWARE, HW_BUS_CYCLES),		"bus-cycles",		},
+  { CHW(CPU_CYCLES),		"cpu-cycles",		"cycles"	},
+  { CHW(INSTRUCTIONS),		"instructions",		""		},
+  { CHW(CACHE_REFERENCES),	"cache-references",	""		},
+  { CHW(CACHE_MISSES),		"cache-misses",		""		},
+  { CHW(BRANCH_INSTRUCTIONS),	"branch-instructions",	"branches"	},
+  { CHW(BRANCH_MISSES),		"branch-misses",	""		},
+  { CHW(BUS_CYCLES),		"bus-cycles",		""		},
 
-  { C(SOFTWARE, SW_CPU_CLOCK),		"cpu-clock",		},
-  { C(SOFTWARE, SW_TASK_CLOCK),		"task-clock",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS),	"page-faults",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS),	"faults",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS_MIN),	"minor-faults",		},
-  { C(SOFTWARE, SW_PAGE_FAULTS_MAJ),	"major-faults",		},
-  { C(SOFTWARE, SW_CONTEXT_SWITCHES),	"context-switches",	},
-  { C(SOFTWARE, SW_CONTEXT_SWITCHES),	"cs",			},
-  { C(SOFTWARE, SW_CPU_MIGRATIONS),	"cpu-migrations",	},
-  { C(SOFTWARE, SW_CPU_MIGRATIONS),	"migrations",		},
+  { CSW(CPU_CLOCK),		"cpu-clock",		""		},
+  { CSW(TASK_CLOCK),		"task-clock",		""		},
+  { CSW(PAGE_FAULTS),		"page-faults",		"faults"	},
+  { CSW(PAGE_FAULTS_MIN),	"minor-faults",		""		},
+  { CSW(PAGE_FAULTS_MAJ),	"major-faults",		""		},
+  { CSW(CONTEXT_SWITCHES),	"context-switches",	"cs"		},
+  { CSW(CPU_MIGRATIONS),	"cpu-migrations",	"migrations"	},
 };
 
 #define __PERF_COUNTER_FIELD(config, name) \
@@ -74,26 +70,70 @@
 
 #define MAX_ALIASES 8
 
-static char *hw_cache [][MAX_ALIASES] = {
-	{ "L1-data"		, "l1-d", "l1d"					},
-	{ "L1-instruction"	, "l1-i", "l1i"					},
-	{ "L2"			, "l2"						},
-	{ "Data-TLB"		, "dtlb", "d-tlb"				},
-	{ "Instruction-TLB"	, "itlb", "i-tlb"				},
-	{ "Branch"		, "bpu" , "btb", "bpc"				},
+static char *hw_cache[][MAX_ALIASES] = {
+ { "L1-d$",	"l1-d",		"l1d",		"L1-data",		},
+ { "L1-i$",	"l1-i",		"l1i",		"L1-instruction",	},
+ { "LLC",	"L2"							},
+ { "dTLB",	"d-tlb",	"Data-TLB",				},
+ { "iTLB",	"i-tlb",	"Instruction-TLB",			},
+ { "branch",	"branches",	"bpu",		"btb",		"bpc",	},
 };
 
-static char *hw_cache_op [][MAX_ALIASES] = {
-	{ "Load"		, "read"					},
-	{ "Store"		, "write"					},
-	{ "Prefetch"		, "speculative-read", "speculative-load"	},
+static char *hw_cache_op[][MAX_ALIASES] = {
+ { "load",	"loads",	"read",					},
+ { "store",	"stores",	"write",				},
+ { "prefetch",	"prefetches",	"speculative-read", "speculative-load",	},
 };
 
-static char *hw_cache_result [][MAX_ALIASES] = {
-	{ "Reference"		, "ops", "access"				},
-	{ "Miss"								},
+static char *hw_cache_result[][MAX_ALIASES] = {
+ { "refs",	"Reference",	"ops",		"access",		},
+ { "misses",	"miss",							},
 };
 
+#define C(x)		PERF_COUNT_HW_CACHE_##x
+#define CACHE_READ	(1 << C(OP_READ))
+#define CACHE_WRITE	(1 << C(OP_WRITE))
+#define CACHE_PREFETCH	(1 << C(OP_PREFETCH))
+#define COP(x)		(1 << x)
+
+/*
+ * cache operartion stat
+ * L1I : Read and prefetch only
+ * ITLB and BPU : Read-only
+ */
+static unsigned long hw_cache_stat[C(MAX)] = {
+ [C(L1D)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(L1I)]	= (CACHE_READ | CACHE_PREFETCH),
+ [C(LL)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(DTLB)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
+ [C(ITLB)]	= (CACHE_READ),
+ [C(BPU)]	= (CACHE_READ),
+};
+
+static int is_cache_op_valid(u8 cache_type, u8 cache_op)
+{
+	if (hw_cache_stat[cache_type] & COP(cache_op))
+		return 1;	/* valid */
+	else
+		return 0;	/* invalid */
+}
+
+static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result)
+{
+	static char name[50];
+
+	if (cache_result) {
+		sprintf(name, "%s-%s-%s", hw_cache[cache_type][0],
+			hw_cache_op[cache_op][0],
+			hw_cache_result[cache_result][0]);
+	} else {
+		sprintf(name, "%s-%s", hw_cache[cache_type][0],
+			hw_cache_op[cache_op][1]);
+	}
+
+	return name;
+}
+
 char *event_name(int counter)
 {
 	u64 config = attrs[counter].config;
@@ -113,7 +153,6 @@
 
 	case PERF_TYPE_HW_CACHE: {
 		u8 cache_type, cache_op, cache_result;
-		static char name[100];
 
 		cache_type   = (config >>  0) & 0xff;
 		if (cache_type > PERF_COUNT_HW_CACHE_MAX)
@@ -127,12 +166,10 @@
 		if (cache_result > PERF_COUNT_HW_CACHE_RESULT_MAX)
 			return "unknown-ext-hardware-cache-result";
 
-		sprintf(name, "%s-Cache-%s-%ses",
-			hw_cache[cache_type][0],
-			hw_cache_op[cache_op][0],
-			hw_cache_result[cache_result][0]);
+		if (!is_cache_op_valid(cache_type, cache_op))
+			return "invalid-cache";
 
-		return name;
+		return event_cache_name(cache_type, cache_op, cache_result);
 	}
 
 	case PERF_TYPE_SOFTWARE:
@@ -163,7 +200,8 @@
 	return -1;
 }
 
-static int parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr)
+static int
+parse_generic_hw_symbols(const char *str, struct perf_counter_attr *attr)
 {
 	int cache_type = -1, cache_op = 0, cache_result = 0;
 
@@ -182,6 +220,9 @@
 	if (cache_op == -1)
 		cache_op = PERF_COUNT_HW_CACHE_OP_READ;
 
+	if (!is_cache_op_valid(cache_type, cache_op))
+		return -EINVAL;
+
 	cache_result = parse_aliases(str, hw_cache_result,
 					PERF_COUNT_HW_CACHE_RESULT_MAX);
 	/*
@@ -196,6 +237,19 @@
 	return 0;
 }
 
+static int check_events(const char *str, unsigned int i)
+{
+	if (!strncmp(str, event_symbols[i].symbol,
+		     strlen(event_symbols[i].symbol)))
+		return 1;
+
+	if (strlen(event_symbols[i].alias))
+		if (!strncmp(str, event_symbols[i].alias,
+			     strlen(event_symbols[i].alias)))
+			return 1;
+	return 0;
+}
+
 /*
  * Each event can have multiple symbolic names.
  * Symbolic names are (almost) exactly matched.
@@ -235,9 +289,7 @@
 	}
 
 	for (i = 0; i < ARRAY_SIZE(event_symbols); i++) {
-		if (!strncmp(str, event_symbols[i].symbol,
-			     strlen(event_symbols[i].symbol))) {
-
+		if (check_events(str, i)) {
 			attr->type = event_symbols[i].type;
 			attr->config = event_symbols[i].config;
 
@@ -289,6 +341,7 @@
 {
 	struct event_symbol *syms = event_symbols;
 	unsigned int i, type, prev_type = -1;
+	char name[40];
 
 	fprintf(stderr, "\n");
 	fprintf(stderr, "List of pre-defined events (to be used in -e):\n");
@@ -301,14 +354,18 @@
 		if (type != prev_type)
 			fprintf(stderr, "\n");
 
-		fprintf(stderr, "  %-30s [%s]\n", syms->symbol,
+		if (strlen(syms->alias))
+			sprintf(name, "%s OR %s", syms->symbol, syms->alias);
+		else
+			strcpy(name, syms->symbol);
+		fprintf(stderr, "  %-40s [%s]\n", name,
 			event_type_descriptors[type]);
 
 		prev_type = type;
 	}
 
 	fprintf(stderr, "\n");
-	fprintf(stderr, "  %-30s [raw hardware event descriptor]\n",
+	fprintf(stderr, "  %-40s [raw hardware event descriptor]\n",
 		"rNNN");
 	fprintf(stderr, "\n");
 
diff --git a/tools/perf/util/run-command.c b/tools/perf/util/run-command.c
index b2f5e85..a393534 100644
--- a/tools/perf/util/run-command.c
+++ b/tools/perf/util/run-command.c
@@ -65,7 +65,6 @@
 		cmd->err = fderr[0];
 	}
 
-#ifndef __MINGW32__
 	fflush(NULL);
 	cmd->pid = fork();
 	if (!cmd->pid) {
@@ -118,71 +117,6 @@
 		}
 		exit(127);
 	}
-#else
-	int s0 = -1, s1 = -1, s2 = -1;	/* backups of stdin, stdout, stderr */
-	const char **sargv = cmd->argv;
-	char **env = environ;
-
-	if (cmd->no_stdin) {
-		s0 = dup(0);
-		dup_devnull(0);
-	} else if (need_in) {
-		s0 = dup(0);
-		dup2(fdin[0], 0);
-	} else if (cmd->in) {
-		s0 = dup(0);
-		dup2(cmd->in, 0);
-	}
-
-	if (cmd->no_stderr) {
-		s2 = dup(2);
-		dup_devnull(2);
-	} else if (need_err) {
-		s2 = dup(2);
-		dup2(fderr[1], 2);
-	}
-
-	if (cmd->no_stdout) {
-		s1 = dup(1);
-		dup_devnull(1);
-	} else if (cmd->stdout_to_stderr) {
-		s1 = dup(1);
-		dup2(2, 1);
-	} else if (need_out) {
-		s1 = dup(1);
-		dup2(fdout[1], 1);
-	} else if (cmd->out > 1) {
-		s1 = dup(1);
-		dup2(cmd->out, 1);
-	}
-
-	if (cmd->dir)
-		die("chdir in start_command() not implemented");
-	if (cmd->env) {
-		env = copy_environ();
-		for (; *cmd->env; cmd->env++)
-			env = env_setenv(env, *cmd->env);
-	}
-
-	if (cmd->perf_cmd) {
-		cmd->argv = prepare_perf_cmd(cmd->argv);
-	}
-
-	cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env);
-
-	if (cmd->env)
-		free_environ(env);
-	if (cmd->perf_cmd)
-		free(cmd->argv);
-
-	cmd->argv = sargv;
-	if (s0 >= 0)
-		dup2(s0, 0), close(s0);
-	if (s1 >= 0)
-		dup2(s1, 1), close(s1);
-	if (s2 >= 0)
-		dup2(s2, 2), close(s2);
-#endif
 
 	if (cmd->pid < 0) {
 		int err = errno;
@@ -288,14 +222,6 @@
 	return run_command(&cmd);
 }
 
-#ifdef __MINGW32__
-static __stdcall unsigned run_thread(void *data)
-{
-	struct async *async = data;
-	return async->proc(async->fd_for_proc, async->data);
-}
-#endif
-
 int start_async(struct async *async)
 {
 	int pipe_out[2];
@@ -304,7 +230,6 @@
 		return error("cannot create pipe: %s", strerror(errno));
 	async->out = pipe_out[0];
 
-#ifndef __MINGW32__
 	/* Flush stdio before fork() to avoid cloning buffers */
 	fflush(NULL);
 
@@ -319,33 +244,17 @@
 		exit(!!async->proc(pipe_out[1], async->data));
 	}
 	close(pipe_out[1]);
-#else
-	async->fd_for_proc = pipe_out[1];
-	async->tid = (HANDLE) _beginthreadex(NULL, 0, run_thread, async, 0, NULL);
-	if (!async->tid) {
-		error("cannot create thread: %s", strerror(errno));
-		close_pair(pipe_out);
-		return -1;
-	}
-#endif
+
 	return 0;
 }
 
 int finish_async(struct async *async)
 {
-#ifndef __MINGW32__
 	int ret = 0;
 
 	if (wait_or_whine(async->pid))
 		ret = error("waitpid (async) failed");
-#else
-	DWORD ret = 0;
-	if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
-		ret = error("waiting for thread failed: %lu", GetLastError());
-	else if (!GetExitCodeThread(async->tid, &ret))
-		ret = error("cannot get thread exit code: %lu", GetLastError());
-	CloseHandle(async->tid);
-#endif
+
 	return ret;
 }
 
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
index 328289f..cc1837d 100644
--- a/tools/perf/util/run-command.h
+++ b/tools/perf/util/run-command.h
@@ -79,12 +79,7 @@
 	int (*proc)(int fd, void *data);
 	void *data;
 	int out;	/* caller reads from here and closes it */
-#ifndef __MINGW32__
 	pid_t pid;
-#else
-	HANDLE tid;
-	int fd_for_proc;
-#endif
 };
 
 int start_async(struct async *async);
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index eaba093..464e7ca 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -259,7 +259,7 @@
 	res = fread(sb->buf + sb->len, 1, size, f);
 	if (res > 0)
 		strbuf_setlen(sb, sb->len + res);
-	else if (res < 0 && oldalloc == 0)
+	else if (oldalloc == 0)
 		strbuf_release(sb);
 	return res;
 }
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index 37b0325..3dca2f6 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -1,7 +1,7 @@
 #ifndef _PERF_STRING_H_
 #define _PERF_STRING_H_
 
-#include "../types.h"
+#include "types.h"
 
 int hex2u64(const char *ptr, u64 *val);
 
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
new file mode 100644
index 0000000..025a78e
--- /dev/null
+++ b/tools/perf/util/strlist.c
@@ -0,0 +1,184 @@
+/*
+ * (c) 2009 Arnaldo Carvalho de Melo <acme@redhat.com>
+ *
+ * Licensed under the GPLv2.
+ */
+
+#include "strlist.h"
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static struct str_node *str_node__new(const char *s, bool dupstr)
+{
+	struct str_node *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		if (dupstr) {
+			s = strdup(s);
+			if (s == NULL)
+				goto out_delete;
+		}
+		self->s = s;
+	}
+
+	return self;
+
+out_delete:
+	free(self);
+	return NULL;
+}
+
+static void str_node__delete(struct str_node *self, bool dupstr)
+{
+	if (dupstr)
+		free((void *)self->s);
+	free(self);
+}
+
+int strlist__add(struct strlist *self, const char *new_entry)
+{
+	struct rb_node **p = &self->entries.rb_node;
+	struct rb_node *parent = NULL;
+	struct str_node *sn;
+
+	while (*p != NULL) {
+		int rc;
+
+		parent = *p;
+		sn = rb_entry(parent, struct str_node, rb_node);
+		rc = strcmp(sn->s, new_entry);
+
+		if (rc > 0)
+			p = &(*p)->rb_left;
+		else if (rc < 0)
+			p = &(*p)->rb_right;
+		else
+			return -EEXIST;
+	}
+
+	sn = str_node__new(new_entry, self->dupstr);
+	if (sn == NULL)
+		return -ENOMEM;
+
+	rb_link_node(&sn->rb_node, parent, p);
+	rb_insert_color(&sn->rb_node, &self->entries);
+
+	return 0;
+}
+
+int strlist__load(struct strlist *self, const char *filename)
+{
+	char entry[1024];
+	int err;
+	FILE *fp = fopen(filename, "r");
+
+	if (fp == NULL)
+		return errno;
+
+	while (fgets(entry, sizeof(entry), fp) != NULL) {
+		const size_t len = strlen(entry);
+
+		if (len == 0)
+			continue;
+		entry[len - 1] = '\0';
+
+		err = strlist__add(self, entry);
+		if (err != 0)
+			goto out;
+	}
+
+	err = 0;
+out:
+	fclose(fp);
+	return err;
+}
+
+void strlist__remove(struct strlist *self, struct str_node *sn)
+{
+	rb_erase(&sn->rb_node, &self->entries);
+	str_node__delete(sn, self->dupstr);
+}
+
+bool strlist__has_entry(struct strlist *self, const char *entry)
+{
+	struct rb_node **p = &self->entries.rb_node;
+	struct rb_node *parent = NULL;
+
+	while (*p != NULL) {
+		struct str_node *sn;
+		int rc;
+
+		parent = *p;
+		sn = rb_entry(parent, struct str_node, rb_node);
+		rc = strcmp(sn->s, entry);
+
+		if (rc > 0)
+			p = &(*p)->rb_left;
+		else if (rc < 0)
+			p = &(*p)->rb_right;
+		else
+			return true;
+	}
+
+	return false;
+}
+
+static int strlist__parse_list_entry(struct strlist *self, const char *s)
+{
+	if (strncmp(s, "file://", 7) == 0)
+		return strlist__load(self, s + 7);
+
+	return strlist__add(self, s);
+}
+
+int strlist__parse_list(struct strlist *self, const char *s)
+{
+	char *sep;
+	int err;
+
+	while ((sep = strchr(s, ',')) != NULL) {
+		*sep = '\0';
+		err = strlist__parse_list_entry(self, s);
+		*sep = ',';
+		if (err != 0)
+			return err;
+		s = sep + 1;
+	}
+
+	return *s ? strlist__parse_list_entry(self, s) : 0;
+}
+
+struct strlist *strlist__new(bool dupstr, const char *slist)
+{
+	struct strlist *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		self->entries = RB_ROOT;
+		self->dupstr = dupstr;
+		if (slist && strlist__parse_list(self, slist) != 0)
+			goto out_error;
+	}
+
+	return self;
+out_error:
+	free(self);
+	return NULL;
+}
+
+void strlist__delete(struct strlist *self)
+{
+	if (self != NULL) {
+		struct str_node *pos;
+		struct rb_node *next = rb_first(&self->entries);
+
+		while (next) {
+			pos = rb_entry(next, struct str_node, rb_node);
+			next = rb_next(&pos->rb_node);
+			strlist__remove(self, pos);
+		}
+		self->entries = RB_ROOT;
+		free(self);
+	}
+}
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
new file mode 100644
index 0000000..2fb117f
--- /dev/null
+++ b/tools/perf/util/strlist.h
@@ -0,0 +1,32 @@
+#ifndef STRLIST_H_
+#define STRLIST_H_
+
+#include "rbtree.h"
+#include <stdbool.h>
+
+struct str_node {
+	struct rb_node rb_node;
+	const char     *s;
+};
+
+struct strlist {
+	struct rb_root entries;
+	bool dupstr;
+};
+
+struct strlist *strlist__new(bool dupstr, const char *slist);
+void strlist__delete(struct strlist *self);
+
+void strlist__remove(struct strlist *self, struct str_node *sn);
+int strlist__load(struct strlist *self, const char *filename);
+int strlist__add(struct strlist *self, const char *str);
+
+bool strlist__has_entry(struct strlist *self, const char *entry);
+
+static inline bool strlist__empty(const struct strlist *self)
+{
+	return rb_first(&self->entries) == NULL;
+}
+
+int strlist__parse_list(struct strlist *self, const char *s);
+#endif /* STRLIST_H_ */
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 86e1437..78c2efd 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -520,7 +520,9 @@
 	nr_syms = shdr.sh_size / shdr.sh_entsize;
 
 	memset(&sym, 0, sizeof(sym));
-
+	self->prelinked = elf_section_by_name(elf, &ehdr, &shdr,
+					      ".gnu.prelink_undo",
+					      NULL) != NULL;
 	elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
 		struct symbol *f;
 		u64 obj_start;
@@ -535,7 +537,13 @@
 		gelf_getshdr(sec, &shdr);
 		obj_start = sym.st_value;
 
-		sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+		if (self->prelinked) {
+			if (verbose >= 2)
+				printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n",
+					(u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset);
+
+			sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+		}
 
 		f = symbol__new(sym.st_value, sym.st_size,
 				elf_sym__name(&sym, symstrs),
@@ -569,6 +577,8 @@
 	if (!name)
 		return -1;
 
+	self->prelinked = 0;
+
 	if (strncmp(self->name, "/tmp/perf-", 10) == 0)
 		return dso__load_perf_map(self, filter, verbose);
 
@@ -629,7 +639,7 @@
 	if (vmlinux)
 		err = dso__load_vmlinux(self, vmlinux, filter, verbose);
 
-	if (err)
+	if (err < 0)
 		err = dso__load_kallsyms(self, filter, verbose);
 
 	return err;
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index ea332e5..2c48ace 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -2,7 +2,7 @@
 #define _PERF_SYMBOL_ 1
 
 #include <linux/types.h>
-#include "../types.h"
+#include "types.h"
 #include "list.h"
 #include "rbtree.h"
 
@@ -20,8 +20,9 @@
 struct dso {
 	struct list_head node;
 	struct rb_root	 syms;
-	unsigned int	 sym_priv_size;
 	struct symbol    *(*find_symbol)(struct dso *, u64 ip);
+	unsigned int	 sym_priv_size;
+	unsigned char	 prelinked;
 	char		 name[0];
 };
 
diff --git a/tools/perf/types.h b/tools/perf/util/types.h
similarity index 100%
rename from tools/perf/types.h
rename to tools/perf/util/types.h
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index b8cfed7..b4be607 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -67,7 +67,6 @@
 #include <assert.h>
 #include <regex.h>
 #include <utime.h>
-#ifndef __MINGW32__
 #include <sys/wait.h>
 #include <sys/poll.h>
 #include <sys/socket.h>
@@ -81,20 +80,6 @@
 #include <netdb.h>
 #include <pwd.h>
 #include <inttypes.h>
-#if defined(__CYGWIN__)
-#undef _XOPEN_SOURCE
-#include <grp.h>
-#define _XOPEN_SOURCE 600
-#include "compat/cygwin.h"
-#else
-#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */
-#include <grp.h>
-#define _ALL_SOURCE 1
-#endif
-#else 	/* __MINGW32__ */
-/* pull in Windows compatibility stuff */
-#include "compat/mingw.h"
-#endif	/* __MINGW32__ */
 
 #ifndef NO_ICONV
 #include <iconv.h>
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 7645543..2884baf 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -746,6 +746,7 @@
 		cpumask_clear(cpus);
 
 	me = get_cpu();
+	spin_lock(&kvm->requests_lock);
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		vcpu = kvm->vcpus[i];
 		if (!vcpu)
@@ -762,6 +763,7 @@
 		smp_call_function_many(cpus, ack_flush, NULL, 1);
 	else
 		called = false;
+	spin_unlock(&kvm->requests_lock);
 	put_cpu();
 	free_cpumask_var(cpus);
 	return called;
@@ -982,6 +984,7 @@
 	kvm->mm = current->mm;
 	atomic_inc(&kvm->mm->mm_count);
 	spin_lock_init(&kvm->mmu_lock);
+	spin_lock_init(&kvm->requests_lock);
 	kvm_io_bus_init(&kvm->pio_bus);
 	mutex_init(&kvm->lock);
 	kvm_io_bus_init(&kvm->mmio_bus);
@@ -1194,6 +1197,8 @@
 		if (!new.dirty_bitmap)
 			goto out_free;
 		memset(new.dirty_bitmap, 0, dirty_bytes);
+		if (old.npages)
+			kvm_arch_flush_shadow(kvm);
 	}
 #endif /* not defined CONFIG_S390 */