ptrace: implement TRAP_NOTIFY and use it for group stop events
Currently there's no way for ptracer to find out whether group stop
finished other than polling with INTERRUPT - GETSIGINFO - CONT
sequence. This patch implements group stop notification for ptracer
using STOP traps.
When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY
is set, which schedules a STOP trap which is sticky - it isn't cleared
by other traps and at least one STOP trap will happen eventually.
STOP trap is synchronization point for event notification and the
tracer can determine the current group stop state by looking at the
signal number portion of exit code (si_status from waitid(2) or
si_code from PTRACE_GETSIGINFO).
Notifications are generated both on start and end of group stops but,
because group stop participation always happens before STOP trap, this
doesn't cause an extra trap while tracee is participating in group
stop. The symmetry will be useful later.
Note that this notification works iff tracee is not trapped.
Currently there is no way to be notified of group stop state changes
while tracee is trapped. This will be addressed by a later patch.
An example program follows.
#define PTRACE_SEIZE 0x4206
#define PTRACE_INTERRUPT 0x4207
#define PTRACE_SEIZE_DEVEL 0x80000000
static const struct timespec ts1s = { .tv_sec = 1 };
int main(int argc, char **argv)
{
pid_t tracee, tracer;
int i;
tracee = fork();
if (!tracee)
while (1)
pause();
tracer = fork();
if (!tracer) {
siginfo_t si;
ptrace(PTRACE_SEIZE, tracee, NULL,
(void *)(unsigned long)PTRACE_SEIZE_DEVEL);
ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
repeat:
waitid(P_PID, tracee, NULL, WSTOPPED);
ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
if (!si.si_code) {
printf("tracer: SIG %d\n", si.si_signo);
ptrace(PTRACE_CONT, tracee, NULL,
(void *)(unsigned long)si.si_signo);
goto repeat;
}
printf("tracer: stopped=%d signo=%d\n",
si.si_signo != SIGTRAP, si.si_signo);
ptrace(PTRACE_CONT, tracee, NULL, NULL);
goto repeat;
}
for (i = 0; i < 3; i++) {
nanosleep(&ts1s, NULL);
printf("mother: SIGSTOP\n");
kill(tracee, SIGSTOP);
nanosleep(&ts1s, NULL);
printf("mother: SIGCONT\n");
kill(tracee, SIGCONT);
}
nanosleep(&ts1s, NULL);
kill(tracer, SIGKILL);
kill(tracee, SIGKILL);
return 0;
}
In the above program, tracer keeps tracee running and gets
notification of each group stop state changes.
# ./test-notify
tracer: stopped=0 signo=5
mother: SIGSTOP
tracer: SIG 19
tracer: stopped=1 signo=19
mother: SIGCONT
tracer: stopped=0 signo=5
tracer: SIG 18
mother: SIGSTOP
tracer: SIG 19
tracer: stopped=1 signo=19
mother: SIGCONT
tracer: stopped=0 signo=5
tracer: SIG 18
mother: SIGSTOP
tracer: SIG 19
tracer: stopped=1 signo=19
mother: SIGCONT
tracer: stopped=0 signo=5
tracer: SIG 18
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8bd84b8..1854def 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1811,15 +1811,17 @@
#define JOBCTL_STOP_PENDING_BIT 17 /* task should stop for group stop */
#define JOBCTL_STOP_CONSUME_BIT 18 /* consume group stop count */
#define JOBCTL_TRAP_STOP_BIT 19 /* trap for STOP */
+#define JOBCTL_TRAP_NOTIFY_BIT 20 /* trap for NOTIFY */
#define JOBCTL_TRAPPING_BIT 21 /* switching to TRACED */
#define JOBCTL_STOP_DEQUEUED (1 << JOBCTL_STOP_DEQUEUED_BIT)
#define JOBCTL_STOP_PENDING (1 << JOBCTL_STOP_PENDING_BIT)
#define JOBCTL_STOP_CONSUME (1 << JOBCTL_STOP_CONSUME_BIT)
#define JOBCTL_TRAP_STOP (1 << JOBCTL_TRAP_STOP_BIT)
+#define JOBCTL_TRAP_NOTIFY (1 << JOBCTL_TRAP_NOTIFY_BIT)
#define JOBCTL_TRAPPING (1 << JOBCTL_TRAPPING_BIT)
-#define JOBCTL_TRAP_MASK JOBCTL_TRAP_STOP
+#define JOBCTL_TRAP_MASK (JOBCTL_TRAP_STOP | JOBCTL_TRAP_NOTIFY)
#define JOBCTL_PENDING_MASK (JOBCTL_STOP_PENDING | JOBCTL_TRAP_MASK)
extern bool task_set_jobctl_pending(struct task_struct *task,
diff --git a/kernel/signal.c b/kernel/signal.c
index 589292f..06177e2 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -817,6 +817,30 @@
return security_task_kill(t, info, sig, 0);
}
+/**
+ * ptrace_trap_notify - schedule trap to notify ptracer
+ * @t: tracee wanting to notify tracer
+ *
+ * This function schedules sticky ptrace trap which is cleared on the next
+ * TRAP_STOP to notify ptracer of an event. @t must have been seized by
+ * ptracer.
+ *
+ * If @t is running, STOP trap will be taken. If already trapped, STOP
+ * trap will be eventually taken without returning to userland after the
+ * existing traps are finished by PTRACE_CONT.
+ *
+ * CONTEXT:
+ * Must be called with @task->sighand->siglock held.
+ */
+static void ptrace_trap_notify(struct task_struct *t)
+{
+ WARN_ON_ONCE(!(t->ptrace & PT_SEIZED));
+ assert_spin_locked(&t->sighand->siglock);
+
+ task_set_jobctl_pending(t, JOBCTL_TRAP_NOTIFY);
+ signal_wake_up(t, 0);
+}
+
/*
* Handle magic process-wide effects of stop/continue signals. Unlike
* the signal actions, these happen immediately at signal-generation
@@ -855,7 +879,10 @@
do {
task_clear_jobctl_pending(t, JOBCTL_STOP_PENDING);
rm_from_queue(SIG_KERNEL_STOP_MASK, &t->pending);
- wake_up_state(t, __TASK_STOPPED);
+ if (likely(!(t->ptrace & PT_SEIZED)))
+ wake_up_state(t, __TASK_STOPPED);
+ else
+ ptrace_trap_notify(t);
} while_each_thread(p, t);
/*
@@ -1797,8 +1824,10 @@
if (why == CLD_STOPPED && (current->jobctl & JOBCTL_STOP_PENDING))
gstop_done = task_participate_group_stop(current);
- /* any trap clears pending STOP trap */
+ /* any trap clears pending STOP trap, STOP trap clears NOTIFY */
task_clear_jobctl_pending(current, JOBCTL_TRAP_STOP);
+ if (info && info->si_code >> 8 == PTRACE_EVENT_STOP)
+ task_clear_jobctl_pending(current, JOBCTL_TRAP_NOTIFY);
/* entering a trap, clear TRAPPING */
task_clear_jobctl_trapping(current);
@@ -1972,7 +2001,10 @@
if (!task_is_stopped(t) &&
task_set_jobctl_pending(t, signr | gstop)) {
sig->group_stop_count++;
- signal_wake_up(t, 0);
+ if (likely(!(t->ptrace & PT_SEIZED)))
+ signal_wake_up(t, 0);
+ else
+ ptrace_trap_notify(t);
}
}
}