driver core: fix a lot of printk usages of bus_id
We have the dev_printk() variants for this kind of thing, use them
instead of directly trying to access the bus_id field of struct device.
This is done in order to remove bus_id entirely.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673..dd29473 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -554,9 +554,8 @@
device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
if (!device_info) {
- printk(KERN_ERR
- "Could not allocated dmabounce_device_info for %s",
- dev->bus_id);
+ dev_err(dev,
+ "Could not allocated dmabounce_device_info\n");
return -ENOMEM;
}
@@ -594,8 +593,7 @@
dev->archdata.dmabounce = device_info;
- printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
- dev->bus_id, dev->bus->name);
+ dev_info(dev, "dmabounce: registered device\n");
return 0;
@@ -614,16 +612,15 @@
dev->archdata.dmabounce = NULL;
if (!device_info) {
- printk(KERN_WARNING
- "%s: Never registered with dmabounce but attempting" \
- "to unregister!\n", dev->bus_id);
+ dev_warn(dev,
+ "Never registered with dmabounce but attempting"
+ "to unregister!\n");
return;
}
if (!list_empty(&device_info->safe_buffers)) {
- printk(KERN_ERR
- "%s: Removing from dmabounce with pending buffers!\n",
- dev->bus_id);
+ dev_err(dev,
+ "Removing from dmabounce with pending buffers!\n");
BUG();
}
@@ -639,8 +636,7 @@
kfree(device_info);
- printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
- dev->bus_id, dev->bus->name);
+ dev_info(dev, "dmabounce: device unregistered\n");
}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b..2048ae0 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -593,7 +593,8 @@
if (dev->dma_mask != 0xffffffffUL) {
ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
if (ret) {
- printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+ dev_err(&dev->dev, "SA1111: Failed to register"
+ " with dmabounce\n");
device_unregister(&dev->dev);
}
}
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8bfd299..2de425f 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -853,8 +853,7 @@
for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
if (ec->resource[i].flags &&
request_resource(&iomem_resource, &ec->resource[i])) {
- printk(KERN_ERR "%s: resource(s) not available\n",
- ec->dev.bus_id);
+ dev_err(&ec->dev, "resource(s) not available\n");
ec->resource[i].end -= ec->resource[i].start;
ec->resource[i].start = 0;
ec->resource[i].flags = 0;
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a..619d05e 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -407,8 +407,7 @@
ret = amba_device_register(d, &dev->resource);
if (ret) {
- printk("unable to register device %s: %d\n",
- d->dev.bus_id, ret);
+ dev_err(&d->dev, "unable to register device: %d\n");
kfree(d);
}
}
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 609c46d..768c262 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -367,7 +367,7 @@
viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
if (!viaisa)
return;
- printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+ dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index a4213c0..cbecb05 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -314,8 +314,7 @@
{
#ifdef CONFIG_PCI
if (mask > 0xffffffff && forbid_dac > 0) {
- printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
- dev->bus_id);
+ dev_info(dev, "PCI: Disallowing DAC for device\n");
return 0;
}
#endif
@@ -342,8 +341,7 @@
type. Normally this doesn't make any difference, but gives
more gentle handling of IOMMU overflow. */
if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
- printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
- dev->bus_id, mask);
+ dev_info(dev, "Force SAC with mask %Lx\n", mask);
return 0;
}
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index be60961..df5f142 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -198,9 +198,7 @@
* out. Hopefully no network devices use single mappings that big.
*/
- printk(KERN_ERR
- "PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
- size, dev->bus_id);
+ dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size);
if (size > PAGE_SIZE*EMERGENCY_PAGES) {
if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)