blob: 060e0e2b1ae62330d5fb0c77540eeded603bd161 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# USB Host Controller Drivers
3#
4comment "USB Host Controller Drivers"
5 depends on USB
6
Peter Korsgaarde9b29ff2008-04-27 08:59:45 +02007config USB_C67X00_HCD
8 tristate "Cypress C67x00 HCD support"
9 depends on USB
10 help
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
12 host/peripheral/OTG USB controllers.
13
14 Enable this option to support this chip in host controller mode.
15 If unsure, say N.
16
17 To compile this driver as a module, choose M here: the
18 module will be called c67x00.
19
Sarah Sharpeb6bab12009-04-29 19:07:13 -070020config USB_XHCI_HCD
21 tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
Felipe Balbi7b720002011-09-23 14:19:56 -070022 depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL
Sarah Sharpeb6bab12009-04-29 19:07:13 -070023 ---help---
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
26
27 To compile this driver as a module, choose M here: the
28 module will be called xhci-hcd.
29
30config USB_XHCI_HCD_DEBUGGING
31 bool "Debugging for the xHCI host controller"
32 depends on USB_XHCI_HCD
33 ---help---
34 Say 'Y' to turn on debugging for the xHCI host controller driver.
35 This will spew debugging output, even in interrupt context.
36 This should only be used for debugging xHCI driver bugs.
37
38 If unsure, say N.
39
Linus Torvalds1da177e2005-04-16 15:20:36 -070040config USB_EHCI_HCD
41 tristate "EHCI HCD (USB 2.0) support"
Jordan Crouse76fa9a22006-01-20 14:06:09 -080042 depends on USB && USB_ARCH_HAS_EHCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070043 ---help---
44 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
45 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
46 If your USB host controller supports USB 2.0, you will likely want to
Thierry Vignaudb967c882009-02-11 13:31:05 -080047 configure this Host Controller Driver.
Linus Torvalds1da177e2005-04-16 15:20:36 -070048
49 EHCI controllers are packaged with "companion" host controllers (OHCI
50 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
Jesper Juhlb3c29d82006-01-10 00:35:22 +010051 will connect to EHCI if the device is high speed, otherwise they
Linus Torvalds1da177e2005-04-16 15:20:36 -070052 connect to a companion controller. If you configure EHCI, you should
53 probably configure the OHCI (for NEC and some other vendors) USB Host
54 Controller Driver or UHCI (for Via motherboards) Host Controller
55 Driver too.
56
57 You may want to read <file:Documentation/usb/ehci.txt>.
58
59 To compile this driver as a module, choose M here: the
60 module will be called ehci-hcd.
61
Linus Torvalds1da177e2005-04-16 15:20:36 -070062config USB_EHCI_ROOT_HUB_TT
Robert P. J. Day9ec249a2008-03-08 03:27:44 -050063 bool "Root Hub Transaction Translators"
64 depends on USB_EHCI_HCD
Linus Torvalds1da177e2005-04-16 15:20:36 -070065 ---help---
66 Some EHCI chips have vendor-specific extensions to integrate
67 transaction translators, so that no OHCI or UHCI companion
68 controller is needed. It's safe to say "y" even if your
69 controller doesn't support this feature.
70
Dan Streetmanba47f662006-05-24 09:39:16 -070071 This supports the EHCI implementation that's originally
72 from ARC, and has since changed hands a few times.
73
74config USB_EHCI_TT_NEWSCHED
Alan Stern37cd6812010-05-21 17:08:21 -040075 bool "Improved Transaction Translator scheduling"
76 depends on USB_EHCI_HCD
77 default y
Dan Streetmanba47f662006-05-24 09:39:16 -070078 ---help---
79 This changes the periodic scheduling code to fill more of the low
80 and full speed bandwidth available from the Transaction Translator
81 (TT) in USB 2.0 hubs. Without this, only one transfer will be
82 issued in each microframe, significantly reducing the number of
83 periodic low/fullspeed transfers possible.
84
85 If you have multiple periodic low/fullspeed devices connected to a
86 highspeed USB hub which is connected to a highspeed USB Host
87 Controller, and some of those devices will not work correctly
Alan Stern37cd6812010-05-21 17:08:21 -040088 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
89 you have only one such device and it doesn't work, you could try
90 saying N.
Dan Streetmanba47f662006-05-24 09:39:16 -070091
Alan Stern37cd6812010-05-21 17:08:21 -040092 If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -070093
Anoop22ced682011-02-24 19:26:28 +053094config USB_EHCI_HCD_PMC_MSP
95 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
96 depends on USB_EHCI_HCD && MSP_HAS_USB
97 default n
98 select USB_EHCI_BIG_ENDIAN_DESC
99 select USB_EHCI_BIG_ENDIAN_MMIO
100 ---help---
101 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
102 If unsure, say N.
103
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100104config USB_EHCI_BIG_ENDIAN_MMIO
105 bool
David Daney1643acc2010-10-08 14:47:52 -0700106 depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
107 ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
Anoop22ced682011-02-24 19:26:28 +0530108 PPC_MPC512x || CPU_CAVIUM_OCTEON || \
Jan Andersson9be03922011-05-03 20:11:58 +0200109 PMC_MSP || SPARC_LEON)
Stefan Roese4d68c0b2007-05-04 11:39:37 -0700110 default y
Benjamin Herrenschmidt083522d2006-12-15 06:54:08 +1100111
Stefan Roese6dbd6822007-05-01 09:29:37 -0700112config USB_EHCI_BIG_ENDIAN_DESC
113 bool
Anatolij Gustschin230f7ed2010-09-28 20:55:21 +0200114 depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
Jan Andersson9be03922011-05-03 20:11:58 +0200115 PPC_MPC512x || PMC_MSP || SPARC_LEON)
Stefan Roese4d68c0b2007-05-04 11:39:37 -0700116 default y
Stefan Roese6dbd6822007-05-01 09:29:37 -0700117
Julie Zhu08d3c182009-09-21 16:08:19 -0600118config XPS_USB_HCD_XILINX
119 bool "Use Xilinx usb host EHCI controller core"
120 depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE)
121 select USB_EHCI_BIG_ENDIAN_DESC
122 select USB_EHCI_BIG_ENDIAN_MMIO
123 ---help---
124 Xilinx xps USB host controller core is EHCI compilant and has
125 transaction translator built-in. It can be configured to either
126 support both high speed and full speed devices, or high speed
127 devices only.
128
Anatolij Gustschin126512e2010-09-28 20:55:20 +0200129config USB_FSL_MPH_DR_OF
130 tristate
131
Li Yangba029782007-05-11 17:09:55 +0800132config USB_EHCI_FSL
Anton Vorontsovb5937a42008-02-21 23:30:58 +0300133 bool "Support for Freescale on-chip EHCI USB controller"
134 depends on USB_EHCI_HCD && FSL_SOC
Li Yangba029782007-05-11 17:09:55 +0800135 select USB_EHCI_ROOT_HUB_TT
Marc Kleine-Budde018b97d2010-10-29 11:04:49 +0200136 select USB_FSL_MPH_DR_OF if OF
Li Yangba029782007-05-11 17:09:55 +0800137 ---help---
138 Variation of ARC USB block used in some Freescale chips.
139
Daniel Mack7e8d5cd2009-10-28 01:14:59 +0100140config USB_EHCI_MXC
141 bool "Support for Freescale on-chip EHCI USB controller"
142 depends on USB_EHCI_HCD && ARCH_MXC
143 select USB_EHCI_ROOT_HUB_TT
144 ---help---
145 Variation of ARC USB block used in some Freescale chips.
146
Keshava Munegowda7f124f42010-11-21 23:23:41 +0530147config USB_EHCI_HCD_OMAP
148 bool "EHCI support for OMAP3 and later chips"
149 depends on USB_EHCI_HCD && ARCH_OMAP
150 default y
151 --- help ---
152 Enables support for the on-chip EHCI controller on
153 OMAP3 and later chips.
154
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530155config USB_EHCI_MSM
156 bool "Support for MSM on-chip EHCI USB controller"
157 depends on USB_EHCI_HCD && ARCH_MSM
158 select USB_EHCI_ROOT_HUB_TT
Pavankumar Kondetidfb21302011-03-04 22:45:02 +0530159 select USB_MSM_OTG
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530160 ---help---
161 Enables support for the USB Host controller present on the
162 Qualcomm chipsets. Root Hub has inbuilt TT.
163 This driver depends on OTG driver for PHY initialization,
Pavankumar Kondeti8bb6a162010-12-07 17:53:57 +0530164 clock management, powering up VBUS, and power management.
Pavankumar Kondeti8cf28f12011-02-04 10:08:18 +0530165 This driver is not supported on boards like trout which
166 has an external PHY.
Pavankumar Kondetib0848ae2010-12-07 17:53:56 +0530167
Benoit Goby79ad3b52011-03-09 16:28:56 -0800168config USB_EHCI_TEGRA
169 boolean "NVIDIA Tegra HCD support"
170 depends on USB_EHCI_HCD && ARCH_TEGRA
171 select USB_EHCI_ROOT_HUB_TT
172 help
173 This driver enables support for the internal USB Host Controllers
174 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
175
Valentine Barshakda0e8fb2007-12-30 15:28:50 -0800176config USB_EHCI_HCD_PPC_OF
177 bool "EHCI support for PPC USB controller on OF platform bus"
178 depends on USB_EHCI_HCD && PPC_OF
179 default y
180 ---help---
181 Enables support for the USB controller present on the PowerPC
182 OpenFirmware platform bus.
183
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900184config USB_EHCI_SH
185 bool "EHCI support for SuperH USB controller"
186 depends on USB_EHCI_HCD && SUPERH
187 ---help---
188 Enables support for the on-chip EHCI controller on the SuperH.
189 If you use the PCI EHCI controller, this option is not necessary.
190
Joonyoung Shim1bcc5aa2011-04-08 14:08:50 +0900191config USB_EHCI_S5P
192 boolean "S5P EHCI support"
193 depends on USB_EHCI_HCD && PLAT_S5P
194 help
195 Enable support for the S5P SOC's on-chip EHCI controller.
196
Wan ZongShun586dfc82009-06-13 09:14:28 +0800197config USB_W90X900_EHCI
198 bool "W90X900(W90P910) EHCI support"
199 depends on USB_EHCI_HCD && ARCH_W90X900
200 ---help---
201 Enables support for the W90X900 USB controller
202
Mac Lin760efe62010-11-25 23:58:00 +0800203config USB_CNS3XXX_EHCI
204 bool "Cavium CNS3XXX EHCI Module"
205 depends on USB_EHCI_HCD && ARCH_CNS3XXX
206 ---help---
207 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
208 It is needed for high-speed (480Mbit/sec) USB 2.0 device
209 support.
210
Gabor Juhos502fa842011-04-13 10:54:22 +0200211config USB_EHCI_ATH79
212 bool "EHCI support for AR7XXX/AR9XXX SoCs"
213 depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X)
214 select USB_EHCI_ROOT_HUB_TT
215 default y
216 ---help---
217 Enables support for the built-in EHCI controller present
218 on the Atheros AR7XXX/AR9XXX SoCs.
219
Rodolfo Giomettib92a78e2008-10-23 10:08:07 +0200220config USB_OXU210HP_HCD
221 tristate "OXU210HP HCD support"
222 depends on USB
223 ---help---
224 The OXU210HP is an USB host/OTG/device controller. Enable this
225 option if your board has this chip. If unsure, say N.
226
227 This driver does not support isochronous transfers and doesn't
228 implement OTG nor USB device controllers.
229
230 To compile this driver as a module, choose M here: the
231 module will be called oxu210hp-hcd.
232
Olav Kongas4808a1c2005-04-09 22:57:39 +0300233config USB_ISP116X_HCD
234 tristate "ISP116X HCD support"
235 depends on USB
Olav Kongas4808a1c2005-04-09 22:57:39 +0300236 ---help---
237 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
238 option if your board has this chip. If unsure, say N.
239
240 This driver does not support isochronous transfers.
241
242 To compile this driver as a module, choose M here: the
243 module will be called isp116x-hcd.
244
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200245config USB_ISP1760_HCD
246 tristate "ISP 1760 HCD support"
Catalin Marinasf7e7aa52009-02-10 16:55:51 +0000247 depends on USB && EXPERIMENTAL
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200248 ---help---
249 The ISP1760 chip is a USB 2.0 host controller.
250
251 This driver does not support isochronous transfers or OTG.
Sebastian Andrzej Siewiorff30bf12008-11-02 15:25:42 +0100252 This USB controller is usually attached to a non-DMA-Master
253 capable bus. NXP's eval kit brings this chip on PCI card
254 where the chip itself is behind a PLB to simulate such
255 a bus.
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200256
257 To compile this driver as a module, choose M here: the
Sebastian Andrzej Siewiorff30bf12008-11-02 15:25:42 +0100258 module will be called isp1760.
Sebastian Siewiordb11e472008-04-24 00:37:04 +0200259
Lothar Wassmanna9d43092009-07-16 20:51:21 -0400260config USB_ISP1362_HCD
261 tristate "ISP1362 HCD support"
262 depends on USB
263 default N
264 ---help---
265 Supports the Philips ISP1362 chip as a host controller
266
267 This driver does not support isochronous transfers.
268
269 To compile this driver as a module, choose M here: the
270 module will be called isp1362-hcd.
271
Linus Torvalds1da177e2005-04-16 15:20:36 -0700272config USB_OHCI_HCD
273 tristate "OHCI HCD support"
274 depends on USB && USB_ARCH_HAS_OHCI
275 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
David Brownell2bf5fa12009-01-24 17:55:57 -0800276 select USB_OTG_UTILS if ARCH_OMAP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277 ---help---
278 The Open Host Controller Interface (OHCI) is a standard for accessing
279 USB 1.1 host controller hardware. It does more in hardware than Intel's
280 UHCI specification. If your USB host controller follows the OHCI spec,
281 say Y. On most non-x86 systems, and on x86 hardware that's not using a
282 USB controller from Intel or VIA, this is appropriate. If your host
283 controller doesn't use PCI, this is probably appropriate. For a PCI
284 based system where you're not sure, the "lspci -v" entry will list the
285 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
286
287 To compile this driver as a module, choose M here: the
288 module will be called ohci-hcd.
289
Anand Gadiyar968b4482010-05-10 21:56:12 +0530290config USB_OHCI_HCD_OMAP1
291 bool "OHCI support for OMAP1/2 chips"
292 depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
293 default y
294 ---help---
295 Enables support for the OHCI controller on OMAP1/2 chips.
296
297config USB_OHCI_HCD_OMAP3
298 bool "OHCI support for OMAP3 and later chips"
299 depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4)
300 default y
301 ---help---
302 Enables support for the on-chip OHCI controller on
303 OMAP3 and later chips.
304
Gabor Juhos90e6ca52011-04-13 10:54:24 +0200305config USB_OHCI_ATH79
306 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs"
307 depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X)
308 default y
309 help
310 Enables support for the built-in OHCI controller present on the
311 Atheros AR71XX/AR7240 SoCs.
312
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313config USB_OHCI_HCD_PPC_SOC
314 bool "OHCI support for on-chip PPC USB controller"
315 depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
316 default y
Benjamin Herrenschmidt11d1a4a2006-12-15 06:54:03 +1100317 select USB_OHCI_BIG_ENDIAN_DESC
318 select USB_OHCI_BIG_ENDIAN_MMIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 ---help---
320 Enables support for the USB controller on the MPC52xx or
321 STB03xxx processor chip. If unsure, say Y.
322
Sylvain Munaut495a6782006-12-13 21:09:55 +0100323config USB_OHCI_HCD_PPC_OF_BE
Arnd Bergmann45e83882009-06-19 05:35:34 -0700324 bool "OHCI support for OF platform bus (big endian)"
325 depends on USB_OHCI_HCD && PPC_OF
Sylvain Munaut495a6782006-12-13 21:09:55 +0100326 select USB_OHCI_BIG_ENDIAN_DESC
327 select USB_OHCI_BIG_ENDIAN_MMIO
Arnd Bergmann45e83882009-06-19 05:35:34 -0700328 ---help---
329 Enables support for big-endian USB controllers present on the
330 OpenFirmware platform bus.
Sylvain Munaut495a6782006-12-13 21:09:55 +0100331
332config USB_OHCI_HCD_PPC_OF_LE
Arnd Bergmann45e83882009-06-19 05:35:34 -0700333 bool "OHCI support for OF platform bus (little endian)"
334 depends on USB_OHCI_HCD && PPC_OF
Sylvain Munaut495a6782006-12-13 21:09:55 +0100335 select USB_OHCI_LITTLE_ENDIAN
Arnd Bergmann45e83882009-06-19 05:35:34 -0700336 ---help---
337 Enables support for little-endian USB controllers present on the
338 OpenFirmware platform bus.
339
340config USB_OHCI_HCD_PPC_OF
341 bool
342 depends on USB_OHCI_HCD && PPC_OF
343 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
Sylvain Munaut495a6782006-12-13 21:09:55 +0100344
Linus Torvalds1da177e2005-04-16 15:20:36 -0700345config USB_OHCI_HCD_PCI
346 bool "OHCI support for PCI-bus USB controllers"
Sylvain Munaut495a6782006-12-13 21:09:55 +0100347 depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348 default y
349 select USB_OHCI_LITTLE_ENDIAN
350 ---help---
351 Enables support for PCI-bus plug-in USB controller cards.
352 If unsure, say Y.
353
Michael Bueschc604e852007-10-09 23:47:17 -0700354config USB_OHCI_HCD_SSB
355 bool "OHCI support for Broadcom SSB OHCI core"
Adrian Bunk1011b322007-10-27 03:06:47 +0200356 depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
Michael Bueschc604e852007-10-09 23:47:17 -0700357 default n
358 ---help---
359 Support for the Sonics Silicon Backplane (SSB) attached
360 Broadcom USB OHCI core.
361
362 This device is present in some embedded devices with
363 Broadcom based SSB bus.
364
365 If unsure, say N.
366
Yoshihiro Shimoda60b0bf02011-03-01 16:58:37 +0900367config USB_OHCI_SH
368 bool "OHCI support for SuperH USB controller"
369 depends on USB_OHCI_HCD && SUPERH
370 ---help---
371 Enables support for the on-chip OHCI controller on the SuperH.
372 If you use the PCI OHCI controller, this option is not necessary.
373
Mac Lin760efe62010-11-25 23:58:00 +0800374config USB_CNS3XXX_OHCI
375 bool "Cavium CNS3XXX OHCI Module"
376 depends on USB_OHCI_HCD && ARCH_CNS3XXX
377 ---help---
378 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
379 It is needed for low-speed USB 1.0 device support.
380
Benjamin Herrenschmidt11d1a4a2006-12-15 06:54:03 +1100381config USB_OHCI_BIG_ENDIAN_DESC
382 bool
383 depends on USB_OHCI_HCD
384 default n
385
386config USB_OHCI_BIG_ENDIAN_MMIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387 bool
388 depends on USB_OHCI_HCD
389 default n
390
391config USB_OHCI_LITTLE_ENDIAN
392 bool
393 depends on USB_OHCI_HCD
394 default n if STB03xxx || PPC_MPC52xx
395 default y
396
397config USB_UHCI_HCD
398 tristate "UHCI HCD (most Intel and VIA) support"
Jan Andersson3db77392011-05-06 12:00:18 +0200399 depends on USB && (PCI || SPARC_LEON)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400 ---help---
401 The Universal Host Controller Interface is a standard by Intel for
402 accessing the USB hardware in the PC (which is also called the USB
403 host controller). If your USB host controller conforms to this
404 standard, you may want to say Y, but see below. All recent boards
405 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
406 i810, i820) conform to this standard. Also all VIA PCI chipsets
407 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
Jan Andersson3db77392011-05-06 12:00:18 +0200408 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
409 If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410
411 To compile this driver as a module, choose M here: the
412 module will be called uhci-hcd.
413
Jan Anderssond3219d12011-05-06 12:00:17 +0200414config USB_UHCI_SUPPORT_NON_PCI_HC
415 bool
416 depends on USB_UHCI_HCD
Jan Andersson3db77392011-05-06 12:00:18 +0200417 default y if SPARC_LEON
Jan Anderssond3219d12011-05-06 12:00:17 +0200418
Jan Andersson8452c672011-05-18 10:44:49 +0200419config USB_UHCI_BIG_ENDIAN_MMIO
420 bool
Jan Anderssonfda928a2011-05-18 10:44:53 +0200421 depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
422 default y
Jan Andersson8452c672011-05-18 10:44:49 +0200423
Jan Andersson51e2f622011-05-18 10:44:51 +0200424config USB_UHCI_BIG_ENDIAN_DESC
425 bool
Jan Anderssonfda928a2011-05-18 10:44:53 +0200426 depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
427 default y
Jan Andersson51e2f622011-05-18 10:44:51 +0200428
Anton Vorontsov236dd4d2009-01-10 05:03:21 +0300429config USB_FHCI_HCD
430 tristate "Freescale QE USB Host Controller support"
431 depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
432 select FSL_GTM
433 select QE_USB
434 help
435 This driver enables support for Freescale QE USB Host Controller
436 (as found on MPC8360 and MPC8323 processors), the driver supports
437 Full and Low Speed USB.
438
439config FHCI_DEBUG
440 bool "Freescale QE USB Host Controller debug support"
441 depends on USB_FHCI_HCD && DEBUG_FS
442 help
443 Say "y" to see some FHCI debug information and statistics
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300444 through debugfs.
Anton Vorontsov236dd4d2009-01-10 05:03:21 +0300445
Tony Olechd774efe2006-09-13 11:27:35 +0100446config USB_U132_HCD
447 tristate "Elan U132 Adapter Host Controller"
448 depends on USB && USB_FTDI_ELAN
449 default M
450 help
451 The U132 adapter is a USB to CardBus adapter specifically designed
452 for PC cards that contain an OHCI host controller. Typical PC cards
453 are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
454 adapter will *NOT* work with PC cards that do not contain an OHCI
455 controller.
456
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +0100457 For those PC cards that contain multiple OHCI controllers only the
Tony Olechd774efe2006-09-13 11:27:35 +0100458 first one is used.
459
460 The driver consists of two modules, the "ftdi-elan" module is a
461 USB client driver that interfaces to the FTDI chip within ELAN's
462 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
463 controller driver that talks to the OHCI controller within the
464 CardBus cards that are inserted in the U132 adapter.
465
466 This driver has been tested with a CardBus OHCI USB adapter, and
467 worked with a USB PEN Drive inserted into the first USB port of
468 the PCCARD. A rather pointless thing to do, but useful for testing.
469
470 It is safe to say M here.
471
472 See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
473
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474config USB_SL811_HCD
475 tristate "SL811HS HCD support"
476 depends on USB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477 help
478 The SL811HS is a single-port USB controller that supports either
479 host side or peripheral side roles. Enable this option if your
480 board has this chip, and you want to use it as a host controller.
481 If unsure, say N.
482
483 To compile this driver as a module, choose M here: the
484 module will be called sl811-hcd.
485
Mike Frysingerad7c56f2011-03-22 15:35:39 -0400486config USB_SL811_HCD_ISO
487 bool "partial ISO support"
488 depends on USB_SL811_HCD
489 help
490 The driver doesn't support iso_frame_desc (yet), but for some simple
491 devices that just queue one ISO frame per URB, then ISO transfers
492 "should" work using the normal urb status fields.
493
494 If unsure, say N.
495
David Brownellc6de2b62005-05-26 05:55:55 -0700496config USB_SL811_CS
497 tristate "CF/PCMCIA support for SL811HS HCD"
498 depends on USB_SL811_HCD && PCMCIA
David Brownellc6de2b62005-05-26 05:55:55 -0700499 help
500 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
501 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
502
503 To compile this driver as a module, choose M here: the
504 module will be called "sl811_cs".
505
Yoshihiro Shimoda5d304352007-05-10 13:18:19 +0900506config USB_R8A66597_HCD
M4rkusXXLfa0de2b2007-08-10 14:53:32 -0700507 tristate "R8A66597 HCD support"
Yoshihiro Shimoda5d304352007-05-10 13:18:19 +0900508 depends on USB
509 help
510 The R8A66597 is a USB 2.0 host and peripheral controller.
511
512 Enable this option if your board has this chip, and you want
513 to use it as a host controller. If unsure, say N.
514
515 To compile this driver as a module, choose M here: the
516 module will be called r8a66597-hcd.
517
Kuninori Morimoto034d7c12011-10-10 22:07:40 -0700518config USB_RENESAS_USBHS_HCD
519 tristate "Renesas USBHS HCD support"
520 depends on USB
521 depends on USB_RENESAS_USBHS
522 help
523 The Renesas USBHS is a USB 2.0 host and peripheral controller.
524
525 Enable this option if your board has this chip, and you want
526 to use it as a host controller. If unsure, say N.
527
528 To compile this driver as a module, choose M here: the
529 module will be called renesas-usbhs.
530
David Vrabel7e6133a2008-09-17 16:34:28 +0100531config USB_WHCI_HCD
David Vrabel6a7c3e42008-09-17 16:34:43 +0100532 tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
533 depends on EXPERIMENTAL
David Vrabel7e6133a2008-09-17 16:34:28 +0100534 depends on PCI && USB
535 select USB_WUSB
536 select UWB_WHCI
537 help
538 A driver for PCI-based Wireless USB Host Controllers that are
539 compliant with the WHCI specification.
540
541 To compile this driver a module, choose M here: the module
542 will be called "whci-hcd".
Inaky Perez-Gonzalezd09318b2008-09-17 16:34:30 +0100543
544config USB_HWA_HCD
David Vrabel6a7c3e42008-09-17 16:34:43 +0100545 tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
546 depends on EXPERIMENTAL
Inaky Perez-Gonzalezd09318b2008-09-17 16:34:30 +0100547 depends on USB
548 select USB_WUSB
549 select UWB_HWA
550 help
551 This driver enables you to connect Wireless USB devices to
552 your system using a Host Wire Adaptor USB dongle. This is an
553 UWB Radio Controller and WUSB Host Controller connected to
554 your machine via USB (specified in WUSB1.0).
555
556 To compile this driver a module, choose M here: the module
557 will be called "hwa-hc".
Martin Fuzzey23d3e7a2009-11-21 12:14:48 +0100558
559config USB_IMX21_HCD
Sascha Hauer5de9ec42011-08-24 08:41:10 +0200560 tristate "i.MX21 HCD support"
561 depends on USB && ARM && ARCH_MXC
Martin Fuzzey23d3e7a2009-11-21 12:14:48 +0100562 help
563 This driver enables support for the on-chip USB host in the
Sascha Hauer5de9ec42011-08-24 08:41:10 +0200564 i.MX21 processor.
Martin Fuzzey23d3e7a2009-11-21 12:14:48 +0100565
566 To compile this driver as a module, choose M here: the
567 module will be called "imx21-hcd".
568
David Daney1643acc2010-10-08 14:47:52 -0700569config USB_OCTEON_EHCI
570 bool "Octeon on-chip EHCI support"
571 depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON
572 default n
573 select USB_EHCI_BIG_ENDIAN_MMIO
574 help
575 Enable support for the Octeon II SOC's on-chip EHCI
576 controller. It is needed for high-speed (480Mbit/sec)
577 USB 2.0 device support. All CN6XXX based chips with USB are
578 supported.
579
580config USB_OCTEON_OHCI
581 bool "Octeon on-chip OHCI support"
582 depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON
583 default USB_OCTEON_EHCI
584 select USB_OHCI_BIG_ENDIAN_MMIO
585 select USB_OHCI_LITTLE_ENDIAN
586 help
587 Enable support for the Octeon II SOC's on-chip OHCI
588 controller. It is needed for low-speed USB 1.0 device
589 support. All CN6XXX based chips with USB are supported.
590
591config USB_OCTEON2_COMMON
592 bool
593 default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
Tanmay Upadhyay3abd7f62011-07-20 10:00:58 +0530594
595config USB_PXA168_EHCI
596 bool "Marvell PXA168 on-chip EHCI HCD support"
597 depends on USB_EHCI_HCD && ARCH_MMP
598 help
599 Enable support for Marvell PXA168 SoC's on-chip EHCI
600 host controller