blob: 01393e6d7da976741c72216fe06c13df6aab0de0 [file] [log] [blame]
Michael Barkowski23308c52007-03-19 09:15:28 -05001/*
2 * MPC832x RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12/ {
13 model = "MPC8323ERDB";
14 compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
15 #address-cells = <1>;
16 #size-cells = <1>;
17
18 cpus {
19 #address-cells = <1>;
20 #size-cells = <0>;
21
22 PowerPC,8323@0 {
23 device_type = "cpu";
24 reg = <0>;
25 d-cache-line-size = <20>; // 32 bytes
26 i-cache-line-size = <20>; // 32 bytes
27 d-cache-size = <4000>; // L1, 16K
28 i-cache-size = <4000>; // L1, 16K
29 timebase-frequency = <0>;
30 bus-frequency = <0>;
31 clock-frequency = <0>;
Michael Barkowski23308c52007-03-19 09:15:28 -050032 };
33 };
34
35 memory {
36 device_type = "memory";
37 reg = <00000000 04000000>;
38 };
39
40 soc8323@e0000000 {
41 #address-cells = <1>;
42 #size-cells = <1>;
Michael Barkowski23308c52007-03-19 09:15:28 -050043 device_type = "soc";
44 ranges = <0 e0000000 00100000>;
45 reg = <e0000000 00000200>;
46 bus-frequency = <0>;
47
48 wdt@200 {
49 device_type = "watchdog";
50 compatible = "mpc83xx_wdt";
51 reg = <200 100>;
52 };
53
54 i2c@3000 {
55 device_type = "i2c";
56 compatible = "fsl-i2c";
57 reg = <3000 100>;
58 interrupts = <e 8>;
59 interrupt-parent = <&pic>;
60 dfsrr;
61 };
62
63 serial@4500 {
64 device_type = "serial";
65 compatible = "ns16550";
66 reg = <4500 100>;
67 clock-frequency = <0>;
68 interrupts = <9 8>;
69 interrupt-parent = <&pic>;
70 };
71
72 serial@4600 {
73 device_type = "serial";
74 compatible = "ns16550";
75 reg = <4600 100>;
76 clock-frequency = <0>;
77 interrupts = <a 8>;
78 interrupt-parent = <&pic>;
79 };
80
81 crypto@30000 {
82 device_type = "crypto";
83 model = "SEC2";
84 compatible = "talitos";
85 reg = <30000 7000>;
86 interrupts = <b 8>;
87 interrupt-parent = <&pic>;
88 /* Rev. 2.2 */
89 num-channels = <1>;
90 channel-fifo-len = <18>;
91 exec-units-mask = <0000004c>;
92 descriptor-types-mask = <0122003f>;
93 };
94
95 pci@8500 {
96 interrupt-map-mask = <f800 0 0 7>;
97 interrupt-map = <
98 /* IDSEL 0x10 AD16 (USB) */
99 8000 0 0 1 &pic 11 8
100
101 /* IDSEL 0x11 AD17 (Mini1)*/
102 8800 0 0 1 &pic 12 8
103 8800 0 0 2 &pic 13 8
104 8800 0 0 3 &pic 14 8
105 8800 0 0 4 &pic 30 8
106
107 /* IDSEL 0x12 AD18 (PCI/Mini2) */
108 9000 0 0 1 &pic 13 8
109 9000 0 0 2 &pic 14 8
110 9000 0 0 3 &pic 30 8
111 9000 0 0 4 &pic 11 8>;
112
113 interrupt-parent = <&pic>;
114 interrupts = <42 8>;
115 bus-range = <0 0>;
116 ranges = <42000000 0 80000000 80000000 0 10000000
117 02000000 0 90000000 90000000 0 10000000
118 01000000 0 d0000000 d0000000 0 04000000>;
119 clock-frequency = <0>;
120 #interrupt-cells = <1>;
121 #size-cells = <2>;
122 #address-cells = <3>;
123 reg = <8500 100>;
Roy Zang344ffde2007-07-10 18:47:21 +0800124 compatible = "fsl,mpc8349-pci";
Michael Barkowski23308c52007-03-19 09:15:28 -0500125 device_type = "pci";
126 };
127
128 pic:pic@700 {
129 interrupt-controller;
130 #address-cells = <0>;
131 #interrupt-cells = <2>;
132 reg = <700 100>;
Michael Barkowski23308c52007-03-19 09:15:28 -0500133 device_type = "ipic";
134 };
135
136 par_io@1400 {
137 reg = <1400 100>;
138 device_type = "par_io";
139 num-ports = <7>;
140
141 ucc2pio:ucc_pin@02 {
142 pio-map = <
143 /* port pin dir open_drain assignment has_irq */
144 3 4 3 0 2 0 /* MDIO */
145 3 5 1 0 2 0 /* MDC */
146 3 15 2 0 1 0 /* RX_CLK (CLK16) */
147 3 17 2 0 1 0 /* TX_CLK (CLK3) */
148 0 12 1 0 1 0 /* TxD0 */
149 0 13 1 0 1 0 /* TxD1 */
150 0 14 1 0 1 0 /* TxD2 */
151 0 15 1 0 1 0 /* TxD3 */
152 0 16 2 0 1 0 /* RxD0 */
153 0 17 2 0 1 0 /* RxD1 */
154 0 18 2 0 1 0 /* RxD2 */
155 0 19 2 0 1 0 /* RxD3 */
156 0 1a 2 0 1 0 /* RX_ER */
157 0 1b 1 0 1 0 /* TX_ER */
158 0 1c 2 0 1 0 /* RX_DV */
159 0 1d 2 0 1 0 /* COL */
160 0 1e 1 0 1 0 /* TX_EN */
161 0 1f 2 0 1 0>; /* CRS */
162 };
163 ucc3pio:ucc_pin@03 {
164 pio-map = <
165 /* port pin dir open_drain assignment has_irq */
166 0 d 2 0 1 0 /* RX_CLK (CLK9) */
167 3 18 2 0 1 0 /* TX_CLK (CLK10) */
168 1 0 1 0 1 0 /* TxD0 */
169 1 1 1 0 1 0 /* TxD1 */
170 1 2 1 0 1 0 /* TxD2 */
171 1 3 1 0 1 0 /* TxD3 */
172 1 4 2 0 1 0 /* RxD0 */
173 1 5 2 0 1 0 /* RxD1 */
174 1 6 2 0 1 0 /* RxD2 */
175 1 7 2 0 1 0 /* RxD3 */
176 1 8 2 0 1 0 /* RX_ER */
177 1 9 1 0 1 0 /* TX_ER */
178 1 a 2 0 1 0 /* RX_DV */
179 1 b 2 0 1 0 /* COL */
180 1 c 1 0 1 0 /* TX_EN */
181 1 d 2 0 1 0>; /* CRS */
182 };
183 };
184 };
185
186 qe@e0100000 {
187 #address-cells = <1>;
188 #size-cells = <1>;
189 device_type = "qe";
190 model = "QE";
191 ranges = <0 e0100000 00100000>;
192 reg = <e0100000 480>;
193 brg-frequency = <0>;
194 bus-frequency = <BCD3D80>;
195
196 muram@10000 {
197 device_type = "muram";
198 ranges = <0 00010000 00004000>;
199
200 data-only@0 {
201 reg = <0 4000>;
202 };
203 };
204
205 spi@4c0 {
206 device_type = "spi";
207 compatible = "fsl_spi";
208 reg = <4c0 40>;
209 interrupts = <2>;
210 interrupt-parent = <&qeic>;
211 mode = "cpu";
212 };
213
214 spi@500 {
215 device_type = "spi";
216 compatible = "fsl_spi";
217 reg = <500 40>;
218 interrupts = <1>;
219 interrupt-parent = <&qeic>;
220 mode = "cpu";
221 };
222
223 ucc@3000 {
224 device_type = "network";
225 compatible = "ucc_geth";
226 model = "UCC";
227 device-id = <2>;
228 reg = <3000 200>;
229 interrupts = <21>;
230 interrupt-parent = <&qeic>;
Timur Tabieae98262007-06-22 14:33:15 -0500231 /*
232 * mac-address is deprecated and will be removed
233 * in 2.6.25. Only recent versions of
234 * U-Boot support local-mac-address, however.
235 */
236 mac-address = [ 00 00 00 00 00 00 ];
237 local-mac-address = [ 00 00 00 00 00 00 ];
Michael Barkowski23308c52007-03-19 09:15:28 -0500238 rx-clock = <20>;
239 tx-clock = <13>;
240 phy-handle = <&phy00>;
241 pio-handle = <&ucc2pio>;
242 };
243
244 ucc@2200 {
245 device_type = "network";
246 compatible = "ucc_geth";
247 model = "UCC";
248 device-id = <3>;
249 reg = <2200 200>;
250 interrupts = <22>;
251 interrupt-parent = <&qeic>;
Timur Tabieae98262007-06-22 14:33:15 -0500252 /*
253 * mac-address is deprecated and will be removed
254 * in 2.6.25. Only recent versions of
255 * U-Boot support local-mac-address, however.
256 */
257 mac-address = [ 00 00 00 00 00 00 ];
258 local-mac-address = [ 00 00 00 00 00 00 ];
Michael Barkowski23308c52007-03-19 09:15:28 -0500259 rx-clock = <19>;
260 tx-clock = <1a>;
261 phy-handle = <&phy04>;
262 pio-handle = <&ucc3pio>;
263 };
264
265 mdio@3120 {
266 #address-cells = <1>;
267 #size-cells = <0>;
268 reg = <3120 18>;
269 device_type = "mdio";
270 compatible = "ucc_geth_phy";
271
272 phy00:ethernet-phy@00 {
273 interrupt-parent = <&pic>;
274 interrupts = <0>;
275 reg = <0>;
276 device_type = "ethernet-phy";
Michael Barkowski23308c52007-03-19 09:15:28 -0500277 };
278 phy04:ethernet-phy@04 {
279 interrupt-parent = <&pic>;
280 interrupts = <0>;
281 reg = <4>;
282 device_type = "ethernet-phy";
Michael Barkowski23308c52007-03-19 09:15:28 -0500283 };
284 };
285
286 qeic:qeic@80 {
287 interrupt-controller;
288 device_type = "qeic";
289 #address-cells = <0>;
290 #interrupt-cells = <1>;
291 reg = <80 80>;
Michael Barkowski23308c52007-03-19 09:15:28 -0500292 big-endian;
293 interrupts = <20 8 21 8>; //high:32 low:33
294 interrupt-parent = <&pic>;
295 };
296 };
297};