Gitiles
Code Review Sign In
gerrit-public.fairphone.software / fp2-dev / kernel / msm / 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 / . / drivers / usb / storage / unusual_devs.h
blob: d53f777c4f50f5df62276508c909b744145d5ffb [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame^]1/* Driver for USB Mass Storage compliant devices
2 * Ununsual Devices File
3 *
4 * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $
5 *
6 * Current development and maintenance by:
7 * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
8 *
9 * Initial work by:
10 * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
11 *
12 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
13 * information about this driver.
14 *
15 * This program is free software; you can redistribute it and/or modify it
16 * under the terms of the GNU General Public License as published by the
17 * Free Software Foundation; either version 2, or (at your option) any
18 * later version.
19 *
20 * This program is distributed in the hope that it will be useful, but
21 * WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
23 * General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License along
26 * with this program; if not, write to the Free Software Foundation, Inc.,
27 * 675 Mass Ave, Cambridge, MA 02139, USA.
28 */
29
30/* IMPORTANT NOTE: This file must be included in another file which does
31 * the following thing for it to work:
32 * The macro UNUSUAL_DEV() must be defined before this file is included
33 */
34#include <linux/config.h>
35
36/* If you edit this file, please try to keep it sorted first by VendorID,
37 * then by ProductID.
38 *
39 * If you want to add an entry for this file, be sure to include the
40 * following information:
41 * - a patch that adds the entry for your device, including your
42 * email address right above the entry (plus maybe a brief
43 * explanation of the reason for the entry),
44 * - a copy of /proc/bus/usb/devices with your device plugged in
45 * running with this patch.
46 * Send your submission to either Phil Dibowitz <phil@ipom.com> or
47 * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
48 * USB development list <linux-usb-devel@lists.sourceforge.net>.
49 */
50
51UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0100,
52 "Mitsumi",
53 "USB FDD",
54 US_SC_DEVICE, US_PR_DEVICE, NULL,
55 US_FL_SINGLE_LUN ),
56
57UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
58 "HP",
59 "CD-Writer+",
60 US_SC_8070, US_PR_CB, NULL, 0),
61
62#ifdef CONFIG_USB_STORAGE_USBAT
63UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
64 "HP",
65 "CD-Writer+ 8200e",
66 US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
67
68UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
69 "HP",
70 "CD-Writer+ CD-4e",
71 US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
72#endif
73
74/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
75 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
76 * always fails and confuses drive.
77 */
78UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
79 "Buffalo",
80 "DUB-P40G HDD",
81 US_SC_DEVICE, US_PR_DEVICE, NULL,
82 US_FL_FIX_INQUIRY ),
83
84#ifdef CONFIG_USB_STORAGE_DPCM
85UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
86 "Microtech",
87 "CameraMate (DPCM_USB)",
88 US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
89#endif
90
91/* Patch submitted by Philipp Friedrich <philipp@void.at> */
92UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
93 "Kyocera",
94 "Finecam S3x",
95 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
96
97/* Patch submitted by Philipp Friedrich <philipp@void.at> */
98UNUSUAL_DEV( 0x0482, 0x0101, 0x0100, 0x0100,
99 "Kyocera",
100 "Finecam S4",
101 US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
102
103/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
104UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100,
105 "Kyocera",
106 "Finecam S5",
107 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
108
109/* Patch for Kyocera Finecam L3
110 * Submitted by Michael Krauth <michael.krauth@web.de>
111 * and Alessandro Fracchetti <al.fracchetti@tin.it>
112 */
113UNUSUAL_DEV( 0x0482, 0x0105, 0x0100, 0x0100,
114 "Kyocera",
115 "Finecam L3",
116 US_SC_SCSI, US_PR_BULK, NULL,
117 US_FL_FIX_INQUIRY),
118
119/* Reported by Paul Stewart <stewart@wetlogic.net>
120 * This entry is needed because the device reports Sub=ff */
121UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001,
122 "Hitachi",
123 "DVD-CAM DZ-MV100A Camcorder",
124 US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),
125
126/* Reported by Andreas Bockhold <andreas@bockionline.de> */
127UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100,
128 "NIKON",
129 "NIKON DSC D70",
130 US_SC_DEVICE, US_PR_DEVICE, NULL,
131 US_FL_FIX_CAPACITY),
132
133/* BENQ DC5330
134 * Reported by Manuel Fombuena <mfombuena@ya.com> and
135 * Frank Copeland <fjc@thingy.apana.org.au> */
136UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
137 "Tekom Technologies, Inc",
138 "300_CAMERA",
139 US_SC_DEVICE, US_PR_DEVICE, NULL,
140 US_FL_IGNORE_RESIDUE ),
141
142/* Reported by Simon Levitt <simon@whattf.com>
143 * This entry needs Sub and Proto fields */
144UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
145 "Epson",
146 "875DC Storage",
147 US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),
148
149/* Reported by Khalid Aziz <khalid@gonehiking.org>
150 * This entry is needed because the device reports Sub=ff */
151UNUSUAL_DEV( 0x04b8, 0x0602, 0x0110, 0x0110,
152 "Epson",
153 "785EPX Storage",
154 US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),
155
156/* Not sure who reported this originally but
157 * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
158 * flag be added */
159UNUSUAL_DEV( 0x04cb, 0x0100, 0x0000, 0x2210,
160 "Fujifilm",
161 "FinePix 1400Zoom",
162 US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
163
164/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
165 * The device needs the flags only.
166 */
167UNUSUAL_DEV( 0x04ce, 0x0002, 0x0074, 0x0074,
168 "ScanLogic",
169 "SL11R-IDE",
170 US_SC_DEVICE, US_PR_DEVICE, NULL,
171 US_FL_FIX_INQUIRY),
172
173/* Reported by Kriston Fincher <kriston@airmail.net>
174 * Patch submitted by Sean Millichamp <sean@bruenor.org>
175 * This is to support the Panasonic PalmCam PV-SD4090
176 * This entry is needed because the device reports Sub=ff
177 */
178UNUSUAL_DEV( 0x04da, 0x0901, 0x0100, 0x0200,
179 "Panasonic",
180 "LS-120 Camera",
181 US_SC_UFI, US_PR_DEVICE, NULL, 0),
182
183/* From Yukihiro Nakai, via zaitcev@yahoo.com.
184 * This is needed for CB instead of CBI */
185UNUSUAL_DEV( 0x04da, 0x0d05, 0x0000, 0x0000,
186 "Sharp CE-CW05",
187 "CD-R/RW Drive",
188 US_SC_8070, US_PR_CB, NULL, 0),
189
190/* Reported by Adriaan Penning <a.penning@luon.net> */
191UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
192 "Panasonic",
193 "DMC-LCx Camera",
194 US_SC_DEVICE, US_PR_DEVICE, NULL,
195 US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
196
197/* Most of the following entries were developed with the help of
198 * Shuttle/SCM directly.
199 */
200UNUSUAL_DEV( 0x04e6, 0x0001, 0x0200, 0x0200,
201 "Matshita",
202 "LS-120",
203 US_SC_8020, US_PR_CB, NULL, 0),
204
205UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100,
206 "Shuttle",
207 "eUSCSI Bridge",
208 US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
209 US_FL_SCM_MULT_TARG ),
210
211#ifdef CONFIG_USB_STORAGE_SDDR09
212UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
213 "Sandisk",
214 "ImageMate SDDR09",
215 US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
216 US_FL_SINGLE_LUN ),
217
218/* This entry is from Andries.Brouwer@cwi.nl */
219UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
220 "SCM Microsystems",
221 "eUSB SmartMedia / CompactFlash Adapter",
222 US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
223 0),
224#endif
225
226/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
227UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0100,
228 "SCM Microsystems Inc.",
229 "eUSB MMC Adapter",
230 US_SC_SCSI, US_PR_CB, NULL,
231 US_FL_SINGLE_LUN),
232
233/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
234UNUSUAL_DEV( 0x04e6, 0x0006, 0x0205, 0x0205,
235 "Shuttle",
236 "eUSB MMC Adapter",
237 US_SC_SCSI, US_PR_DEVICE, NULL,
238 US_FL_SINGLE_LUN),
239
240UNUSUAL_DEV( 0x04e6, 0x0007, 0x0100, 0x0200,
241 "Sony",
242 "Hifd",
243 US_SC_SCSI, US_PR_CB, NULL,
244 US_FL_SINGLE_LUN),
245
246UNUSUAL_DEV( 0x04e6, 0x0009, 0x0200, 0x0200,
247 "Shuttle",
248 "eUSB ATA/ATAPI Adapter",
249 US_SC_8020, US_PR_CB, NULL, 0),
250
251UNUSUAL_DEV( 0x04e6, 0x000a, 0x0200, 0x0200,
252 "Shuttle",
253 "eUSB CompactFlash Adapter",
254 US_SC_8020, US_PR_CB, NULL, 0),
255
256UNUSUAL_DEV( 0x04e6, 0x000B, 0x0100, 0x0100,
257 "Shuttle",
258 "eUSCSI Bridge",
259 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
260 US_FL_SCM_MULT_TARG ),
261
262UNUSUAL_DEV( 0x04e6, 0x000C, 0x0100, 0x0100,
263 "Shuttle",
264 "eUSCSI Bridge",
265 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
266 US_FL_SCM_MULT_TARG ),
267
268UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
269 "Shuttle",
270 "CD-RW Device",
271 US_SC_8020, US_PR_CB, NULL, 0),
272
273/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
274 * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
275 * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
276 */
277
278UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
279 "Kobian Mercury",
280 "Binocam DCB-132",
281 US_SC_DEVICE, US_PR_DEVICE, NULL,
282 US_FL_BULK32),
283
284#ifdef CONFIG_USB_STORAGE_USBAT
285UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
286 "SCM",
287 "SCM USBAT-02",
288 US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat,
289 US_FL_SINGLE_LUN),
290#endif
291
292/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
293UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
294 "Belkin",
295 "USB SCSI Adaptor",
296 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
297 US_FL_SCM_MULT_TARG ),
298
299/* Iomega Clik! Drive
300 * Reported by David Chatenay <dchatenay@hotmail.com>
301 * The reason this is needed is not fully known.
302 */
303UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
304 "Iomega",
305 "USB Clik! 40",
306 US_SC_8070, US_PR_BULK, NULL,
307 US_FL_FIX_INQUIRY ),
308
309/* Yakumo Mega Image 37
310 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
311UNUSUAL_DEV( 0x052b, 0x1801, 0x0100, 0x0100,
312 "Tekom Technologies, Inc",
313 "300_CAMERA",
314 US_SC_DEVICE, US_PR_DEVICE, NULL,
315 US_FL_IGNORE_RESIDUE ),
316
317/* Another Yakumo camera.
318 * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
319UNUSUAL_DEV( 0x052b, 0x1804, 0x0100, 0x0100,
320 "Tekom Technologies, Inc",
321 "300_CAMERA",
322 US_SC_DEVICE, US_PR_DEVICE, NULL,
323 US_FL_IGNORE_RESIDUE ),
324
325/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
326UNUSUAL_DEV( 0x052b, 0x1807, 0x0100, 0x0100,
327 "Tekom Technologies, Inc",
328 "300_CAMERA",
329 US_SC_DEVICE, US_PR_DEVICE, NULL,
330 US_FL_IGNORE_RESIDUE ),
331
332/* Yakumo Mega Image 47
333 * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
334UNUSUAL_DEV( 0x052b, 0x1905, 0x0100, 0x0100,
335 "Tekom Technologies, Inc",
336 "400_CAMERA",
337 US_SC_DEVICE, US_PR_DEVICE, NULL,
338 US_FL_IGNORE_RESIDUE ),
339
340/* Reported by Paul Ortyl <ortylp@3miasto.net>
341 * Note that it's similar to the device above, only different prodID */
342UNUSUAL_DEV( 0x052b, 0x1911, 0x0100, 0x0100,
343 "Tekom Technologies, Inc",
344 "400_CAMERA",
345 US_SC_DEVICE, US_PR_DEVICE, NULL,
346 US_FL_IGNORE_RESIDUE ),
347
348UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450,
349 "Sony",
350 "DSC-S30/S70/S75/505V/F505/F707/F717/P8",
351 US_SC_SCSI, US_PR_DEVICE, NULL,
352 US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
353
354/* This entry is needed because the device reports Sub=ff */
355UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0500,
356 "Sony",
357 "DSC-T1",
358 US_SC_8070, US_PR_DEVICE, NULL,
359 US_FL_SINGLE_LUN ),
360
361
362/* Reported by wim@geeks.nl */
363UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
364 "Sony",
365 "Memorystick NW-MS7",
366 US_SC_DEVICE, US_PR_DEVICE, NULL,
367 US_FL_SINGLE_LUN ),
368
369#ifdef CONFIG_USB_STORAGE_ISD200
370UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
371 "Sony",
372 "Portable USB Harddrive V2",
373 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
374 0 ),
375#endif
376
377/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
378UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x0501,
379 "Sony",
380 "USB Floppy Drive",
381 US_SC_DEVICE, US_PR_DEVICE, NULL,
382 US_FL_SINGLE_LUN ),
383
384UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
385 "Sony",
386 "Memorystick MSAC-US1",
387 US_SC_DEVICE, US_PR_DEVICE, NULL,
388 US_FL_SINGLE_LUN ),
389
390/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
391UNUSUAL_DEV( 0x054c, 0x002e, 0x0106, 0x0310,
392 "Sony",
393 "Handycam",
394 US_SC_SCSI, US_PR_DEVICE, NULL,
395 US_FL_SINGLE_LUN ),
396
397/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
398UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
399 "Sony",
400 "Handycam HC-85",
401 US_SC_UFI, US_PR_DEVICE, NULL,
402 US_FL_SINGLE_LUN ),
403
404UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
405 "Sony",
406 "Memorystick MSC-U01N",
407 US_SC_DEVICE, US_PR_DEVICE, NULL,
408 US_FL_SINGLE_LUN ),
409
410/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
411UNUSUAL_DEV( 0x054c, 0x0058, 0x0000, 0x9999,
412 "Sony",
413 "PEG N760c Memorystick",
414 US_SC_DEVICE, US_PR_DEVICE, NULL,
415 US_FL_FIX_INQUIRY ),
416
417UNUSUAL_DEV( 0x054c, 0x0069, 0x0000, 0x9999,
418 "Sony",
419 "Memorystick MSC-U03",
420 US_SC_UFI, US_PR_CB, NULL,
421 US_FL_SINGLE_LUN ),
422
423/* Submitted by Nathan Babb <nathan@lexi.com> */
424UNUSUAL_DEV( 0x054c, 0x006d, 0x0000, 0x9999,
425 "Sony",
426 "PEG Mass Storage",
427 US_SC_DEVICE, US_PR_DEVICE, NULL,
428 US_FL_FIX_INQUIRY ),
429
430/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
431UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
432 "Sony",
433 "PEG Mass Storage",
434 US_SC_DEVICE, US_PR_DEVICE, NULL,
435 US_FL_FIX_INQUIRY ),
436
437/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
438UNUSUAL_DEV( 0x054c, 0x0099, 0x0000, 0x9999,
439 "Sony",
440 "PEG Mass Storage",
441 US_SC_DEVICE, US_PR_DEVICE, NULL,
442 US_FL_FIX_INQUIRY ),
443
444
445UNUSUAL_DEV( 0x057b, 0x0000, 0x0000, 0x0299,
446 "Y-E Data",
447 "Flashbuster-U",
448 US_SC_DEVICE, US_PR_CB, NULL,
449 US_FL_SINGLE_LUN),
450
451UNUSUAL_DEV( 0x057b, 0x0000, 0x0300, 0x9999,
452 "Y-E Data",
453 "Flashbuster-U",
454 US_SC_DEVICE, US_PR_DEVICE, NULL,
455 US_FL_SINGLE_LUN),
456
457/* Reported by Johann Cardon <johann.cardon@free.fr>
458 * This entry is needed only because the device reports
459 * bInterfaceClass = 0xff (vendor-specific)
460 */
461UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
462 "Y-E Data",
463 "Silicon Media R/W",
464 US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
465
466/* Fabrizio Fellini <fello@libero.it> */
467UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
468 "Fujifilm",
469 "Digital Camera EX-20 DSC",
470 US_SC_8070, US_PR_DEVICE, NULL, 0 ),
471
472/* The entry was here before I took over, and had US_SC_RBC. It turns
473 * out that isn't needed. Additionally, Torsten Eriksson
474 * <Torsten.Eriksson@bergianska.se> is able to use his device fine
475 * without this entry at all - but I don't suspect that will be true
476 * for all users (the protocol is likely needed), so is staying at
477 * this time. - Phil Dibowitz <phil@ipom.com>
478 */
479UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
480 "LaCie",
481 "USB Hard Disk",
482 US_SC_DEVICE, US_PR_CB, NULL, 0 ),
483
484/* Submitted by Joel Bourquard <numlock@freesurf.ch>
485 * Some versions of this device need the SubClass and Protocol overrides
486 * while others don't.
487 */
488UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110,
489 "In-System",
490 "PyroGate External CD-ROM Enclosure (FCD-523)",
491 US_SC_SCSI, US_PR_BULK, NULL,
492 US_FL_NEED_OVERRIDE ),
493
494#ifdef CONFIG_USB_STORAGE_ISD200
495UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
496 "In-System",
497 "USB/IDE Bridge (ATA/ATAPI)",
498 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
499 0 ),
500
501UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
502 "In-System",
503 "Portable USB Harddrive V2",
504 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
505 0 ),
506
507UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
508 "In-System",
509 "Portable USB Harddrive V2",
510 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
511 0 ),
512
513UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
514 "In-System",
515 "USB Storage Adapter V2",
516 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
517 0 ),
518#endif
519
520/* Reported by Avi Kivity <avi@argo.co.il> */
521UNUSUAL_DEV( 0x05ac, 0x1203, 0x0001, 0x0001,
522 "Apple",
523 "iPod",
524 US_SC_DEVICE, US_PR_DEVICE, NULL,
525 US_FL_FIX_CAPACITY ),
526
527UNUSUAL_DEV( 0x05ac, 0x1205, 0x0001, 0x0001,
528 "Apple",
529 "iPod",
530 US_SC_DEVICE, US_PR_DEVICE, NULL,
531 US_FL_FIX_CAPACITY ),
532
533#ifdef CONFIG_USB_STORAGE_JUMPSHOT
534UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
535 "Lexar",
536 "Jumpshot USB CF Reader",
537 US_SC_SCSI, US_PR_JUMPSHOT, NULL,
538 US_FL_NEED_OVERRIDE ),
539#endif
540
541/* Reported by Blake Matheny <bmatheny@purdue.edu> */
542UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
543 "Lexar",
544 "USB CF Reader",
545 US_SC_DEVICE, US_PR_DEVICE, NULL,
546 US_FL_FIX_INQUIRY ),
547
548/* The following two entries are for a Genesys USB to IDE
549 * converter chip, but it changes its ProductId depending
550 * on whether or not a disk or an optical device is enclosed
551 * They were originally reported by Alexander Oltu
552 * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
553 * respectively.
554 */
555UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff,
556 "Genesys Logic",
557 "USB to IDE Optical",
558 US_SC_DEVICE, US_PR_DEVICE, NULL,
559 US_FL_GO_SLOW ),
560
561UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
562 "Genesys Logic",
563 "USB to IDE Disk",
564 US_SC_DEVICE, US_PR_DEVICE, NULL,
565 US_FL_GO_SLOW ),
566
567/* Reported by Hanno Boeck <hanno@gmx.de>
568 * Taken from the Lycoris Kernel */
569UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
570 "Vivitar",
571 "Vivicam 35Xx",
572 US_SC_SCSI, US_PR_BULK, NULL,
573 US_FL_FIX_INQUIRY ),
574
575UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
576 "TEAC",
577 "Floppy Drive",
578 US_SC_UFI, US_PR_CB, NULL, 0 ),
579
580#ifdef CONFIG_USB_STORAGE_SDDR09
581UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
582 "Olympus",
583 "Camedia MAUSB-2",
584 US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
585 US_FL_SINGLE_LUN ),
586#endif
587
588/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
589UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
590 "SigmaTel",
591 "USBMSC Audio Player",
592 US_SC_DEVICE, US_PR_DEVICE, NULL,
593 US_FL_FIX_CAPACITY ),
594
595/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
596UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
597 "Prolific Technology Inc.",
598 "Mass Storage Device",
599 US_SC_DEVICE, US_PR_DEVICE, NULL,
600 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
601
602/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
603UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
604 "Prolific Technology Inc.",
605 "ATAPI-6 Bridge Controller",
606 US_SC_DEVICE, US_PR_DEVICE, NULL,
607 US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),
608
609/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
610UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
611 "Minolta",
612 "Dimage F300",
613 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
614
615/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
616UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001,
617 "Minolta",
618 "DIMAGE E223",
619 US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),
620
621UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100,
622 "Hagiwara",
623 "FlashGate SmartMedia",
624 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
625
626UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100,
627 "Hagiwara",
628 "Flashgate",
629 US_SC_SCSI, US_PR_BULK, NULL, 0 ),
630
631UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
632 "Sandisk",
633 "ImageMate SDDR-05a",
634 US_SC_SCSI, US_PR_CB, NULL,
635 US_FL_SINGLE_LUN ),
636
637UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
638 "Sandisk",
639 "ImageMate SDDR-12",
640 US_SC_SCSI, US_PR_CB, NULL,
641 US_FL_SINGLE_LUN ),
642
643#ifdef CONFIG_USB_STORAGE_SDDR09
644UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
645 "Sandisk",
646 "ImageMate SDDR-09",
647 US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
648 US_FL_SINGLE_LUN ),
649#endif
650
651#ifdef CONFIG_USB_STORAGE_FREECOM
652UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
653 "Freecom",
654 "USB-IDE",
655 US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
656#endif
657
658/* Reported by Eero Volotinen <eero@ping-viini.org> */
659UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406,
660 "Freecom Technologies",
661 "FHD-Classic",
662 US_SC_DEVICE, US_PR_DEVICE, NULL,
663 US_FL_FIX_CAPACITY),
664
665UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
666 "Microtech",
667 "USB-SCSI-DB25",
668 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
669 US_FL_SCM_MULT_TARG ),
670
671UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
672 "Microtech",
673 "USB-SCSI-HD50",
674 US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
675 US_FL_SCM_MULT_TARG ),
676
677#ifdef CONFIG_USB_STORAGE_DPCM
678UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
679 "Microtech",
680 "CameraMate (DPCM_USB)",
681 US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
682#endif
683
684#ifdef CONFIG_USB_STORAGE_DATAFAB
685UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
686 "Datafab",
687 "MDCFE-B USB CF Reader",
688 US_SC_SCSI, US_PR_DATAFAB, NULL,
689 0 ),
690
691/*
692 * The following Datafab-based devices may or may not work
693 * using the current driver...the 0xffff is arbitrary since I
694 * don't know what device versions exist for these guys.
695 *
696 * The 0xa003 and 0xa004 devices in particular I'm curious about.
697 * I'm told they exist but so far nobody has come forward to say that
698 * they work with this driver. Given the success we've had getting
699 * other Datafab-based cards operational with this driver, I've decided
700 * to leave these two devices in the list.
701 */
702UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
703 "SIIG/Datafab",
704 "SIIG/Datafab Memory Stick+CF Reader/Writer",
705 US_SC_SCSI, US_PR_DATAFAB, NULL,
706 0 ),
707
708/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
709UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
710 "Datafab/Unknown",
711 "MD2/MD3 Disk enclosure",
712 US_SC_SCSI, US_PR_DATAFAB, NULL,
713 US_FL_SINGLE_LUN ),
714
715UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
716 "Datafab/Unknown",
717 "Datafab-based Reader",
718 US_SC_SCSI, US_PR_DATAFAB, NULL,
719 0 ),
720
721UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
722 "Datafab/Unknown",
723 "Datafab-based Reader",
724 US_SC_SCSI, US_PR_DATAFAB, NULL,
725 0 ),
726
727UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
728 "PNY/Datafab",
729 "PNY/Datafab CF+SM Reader",
730 US_SC_SCSI, US_PR_DATAFAB, NULL,
731 0 ),
732
733UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
734 "Simple Tech/Datafab",
735 "Simple Tech/Datafab CF+SM Reader",
736 US_SC_SCSI, US_PR_DATAFAB, NULL,
737 0 ),
738#endif
739
740#ifdef CONFIG_USB_STORAGE_SDDR55
741/* Contributed by Peter Waechtler */
742UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
743 "Datafab",
744 "MDSM-B reader",
745 US_SC_SCSI, US_PR_SDDR55, NULL,
746 US_FL_FIX_INQUIRY ),
747#endif
748
749#ifdef CONFIG_USB_STORAGE_DATAFAB
750/* Submitted by Olaf Hering <olh@suse.de> */
751UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
752 "Datafab Systems, Inc.",
753 "USB to CF + SM Combo (LC1)",
754 US_SC_SCSI, US_PR_DATAFAB, NULL,
755 0 ),
756#endif
757#ifdef CONFIG_USB_STORAGE_SDDR55
758/* SM part - aeb <Andries.Brouwer@cwi.nl> */
759UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
760 "Datafab Systems, Inc.",
761 "USB to CF + SM Combo (LC1)",
762 US_SC_SCSI, US_PR_SDDR55, NULL,
763 US_FL_SINGLE_LUN ),
764#endif
765
766/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
767 * Only revision 1.13 tested (same for all of the above devices,
768 * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
769 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
770 * See also http://martin.wilck.bei.t-online.de/#kecf .
771 */
772UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
773 "Datafab",
774 "KECF-USB",
775 US_SC_DEVICE, US_PR_DEVICE, NULL,
776 US_FL_FIX_INQUIRY ),
777
778/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
779 * to the USB storage specification in two ways:
780 * - They tell us they are using transport protocol CBI. In reality they
781 * are using transport protocol CB.
782 * - They don't like the INQUIRY command. So we must handle this command
783 * of the SCSI layer ourselves.
784 * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
785 * bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
786 * So don't remove the US_PR_CB override!
787 * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
788 */
789UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
790 "Casio",
791 "QV DigitalCamera",
792 US_SC_8070, US_PR_CB, NULL,
793 US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
794
795/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
796UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
797 "Samsung",
798 "Digimax 410",
799 US_SC_DEVICE, US_PR_DEVICE, NULL,
800 US_FL_FIX_INQUIRY),
801
802/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
803 * Flag will support Bulk devices which use a standards-violating 32-byte
804 * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
805 * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
806 */
807
808UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
809 "Grandtech",
810 "DC2MEGA",
811 US_SC_DEVICE, US_PR_DEVICE, NULL,
812 US_FL_BULK32),
813
814
815/* Entry needed for flags. Moreover, all devices with this ID use
816 * bulk-only transport, but _some_ falsely report Control/Bulk instead.
817 * One example is "Trumpion Digital Research MYMP3".
818 * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
819 */
820UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
821 "Trumpion",
822 "t33520 USB Flash Card Controller",
823 US_SC_DEVICE, US_PR_BULK, NULL,
824 US_FL_NEED_OVERRIDE ),
825
826/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
827UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
828 "Trumpion",
829 "MP3 player",
830 US_SC_RBC, US_PR_BULK, NULL,
831 0 ),
832
833/* aeb */
834UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
835 "Feiya",
836 "5-in-1 Card Reader",
837 US_SC_DEVICE, US_PR_DEVICE, NULL,
838 US_FL_FIX_CAPACITY ),
839
840/* This Pentax still camera is not conformant
841 * to the USB storage specification: -
842 * - It does not like the INQUIRY command. So we must handle this command
843 * of the SCSI layer ourselves.
844 * Tested on Rev. 10.00 (0x1000)
845 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
846 */
847UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
848 "Pentax",
849 "Optio 2/3/400",
850 US_SC_DEVICE, US_PR_DEVICE, NULL,
851 US_FL_FIX_INQUIRY ),
852
853
854/* Submitted by Per Winkvist <per.winkvist@uk.com> */
855UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
856 "Pentax",
857 "Optio S/S4",
858 US_SC_DEVICE, US_PR_DEVICE, NULL,
859 US_FL_FIX_INQUIRY ),
860
861#ifdef CONFIG_USB_STORAGE_ISD200
862UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
863 "ATI",
864 "USB Cable 205",
865 US_SC_ISD200, US_PR_BULK, isd200_Initialization,
866 0 ),
867#endif
868
869#ifdef CONFIG_USB_STORAGE_DATAFAB
870UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
871 "Acomdata",
872 "CF",
873 US_SC_SCSI, US_PR_DATAFAB, NULL,
874 US_FL_SINGLE_LUN ),
875#endif
876#ifdef CONFIG_USB_STORAGE_SDDR55
877UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
878 "Acomdata",
879 "SM",
880 US_SC_SCSI, US_PR_SDDR55, NULL,
881 US_FL_SINGLE_LUN ),
882#endif
883
884/* Submitted by Joris Struyve <joris@struyve.be> */
885UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
886 "Medion",
887 "MD 7425",
888 US_SC_DEVICE, US_PR_DEVICE, NULL,
889 US_FL_FIX_INQUIRY),
890
891/*
892 * Entry for Jenoptik JD 5200z3
893 *
894 * email: car.busse@gmx.de
895 */
896UNUSUAL_DEV( 0x0d96, 0x5200, 0x0001, 0x0200,
897 "Jenoptik",
898 "JD 5200 z3",
899 US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
900
901/* Reported by Lubomir Blaha <tritol@trilogic.cz>
902 * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
903 * works for me. Can anybody correct these values? (I able to test corrected
904 * version.)
905 */
906UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
907 "Netac",
908 "USB-CF-Card",
909 US_SC_DEVICE, US_PR_DEVICE, NULL,
910 US_FL_FIX_INQUIRY ),
911
912/* Patch by Stephan Walter <stephan.walter@epfl.ch>
913 * I don't know why, but it works... */
914UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
915 "WINWARD",
916 "Music Disk",
917 US_SC_DEVICE, US_PR_DEVICE, NULL,
918 US_FL_IGNORE_RESIDUE ),
919
920/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
921UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
922 "PNP_MP3",
923 "PNP_MP3 PLAYER",
924 US_SC_DEVICE, US_PR_DEVICE, NULL,
925 US_FL_IGNORE_RESIDUE ),
926
927/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
928UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
929 "USB",
930 "Solid state disk",
931 US_SC_DEVICE, US_PR_DEVICE, NULL,
932 US_FL_FIX_INQUIRY ),
933
934/* Submitted by Daniel Drake <dsd@gentoo.org>
935 * Reported by dayul on the Gentoo Forums */
936UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
937 "Ours Technology",
938 "Flash Disk",
939 US_SC_DEVICE, US_PR_DEVICE, NULL,
940 US_FL_IGNORE_RESIDUE ),
941
942/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
943UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
944 "USB",
945 "Flash Disk",
946 US_SC_DEVICE, US_PR_DEVICE, NULL,
947 US_FL_IGNORE_RESIDUE ),
948
949/* Reported by Michael Stattmann <michael@stattmann.com> */
950UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
951 "Sony Ericsson",
952 "V800-Vodafone 802",
953 US_SC_DEVICE, US_PR_DEVICE, NULL,
954 US_FL_NO_WP_DETECT ),
955
956/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
957 * Tested on hardware version 1.10.
958 * Entry is needed only for the initializer function override.
959 */
960UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999,
961 "Desknote",
962 "UCR-61S2B",
963 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
964 0 ),
965
966/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
967UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
968 "SWISSBIT",
969 "Black Silver",
970 US_SC_DEVICE, US_PR_DEVICE, NULL,
971 US_FL_IGNORE_RESIDUE ),
972
973/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
974UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
975 "MPIO",
976 "HS200",
977 US_SC_DEVICE, US_PR_DEVICE, NULL,
978 US_FL_GO_SLOW ),
979
980#ifdef CONFIG_USB_STORAGE_SDDR55
981UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
982 "Sandisk",
983 "ImageMate SDDR55",
984 US_SC_SCSI, US_PR_SDDR55, NULL,
985 US_FL_SINGLE_LUN),
986#endif