blob: 17b8947aa7daff59f0a92713f1fe97c8cf9fa721 [file] [log] [blame]
Dave Hansene1785e82005-06-23 00:07:49 -07001config SELECT_MEMORY_MODEL
2 def_bool y
3 depends on EXPERIMENTAL || ARCH_SELECT_MEMORY_MODEL
4
Dave Hansen3a9da762005-06-23 00:07:42 -07005choice
6 prompt "Memory model"
Dave Hansene1785e82005-06-23 00:07:49 -07007 depends on SELECT_MEMORY_MODEL
8 default DISCONTIGMEM_MANUAL if ARCH_DISCONTIGMEM_DEFAULT
Andy Whitcroftd41dee32005-06-23 00:07:54 -07009 default SPARSEMEM_MANUAL if ARCH_SPARSEMEM_DEFAULT
Dave Hansene1785e82005-06-23 00:07:49 -070010 default FLATMEM_MANUAL
Dave Hansen3a9da762005-06-23 00:07:42 -070011
Dave Hansene1785e82005-06-23 00:07:49 -070012config FLATMEM_MANUAL
Dave Hansen3a9da762005-06-23 00:07:42 -070013 bool "Flat Memory"
Anton Blanchardc898ec12006-01-06 00:12:07 -080014 depends on !(ARCH_DISCONTIGMEM_ENABLE || ARCH_SPARSEMEM_ENABLE) || ARCH_FLATMEM_ENABLE
Dave Hansen3a9da762005-06-23 00:07:42 -070015 help
16 This option allows you to change some of the ways that
17 Linux manages its memory internally. Most users will
18 only have one option here: FLATMEM. This is normal
19 and a correct option.
20
Andy Whitcroftd41dee32005-06-23 00:07:54 -070021 Some users of more advanced features like NUMA and
22 memory hotplug may have different options here.
23 DISCONTIGMEM is an more mature, better tested system,
24 but is incompatible with memory hotplug and may suffer
25 decreased performance over SPARSEMEM. If unsure between
26 "Sparse Memory" and "Discontiguous Memory", choose
27 "Discontiguous Memory".
28
29 If unsure, choose this option (Flat Memory) over any other.
Dave Hansen3a9da762005-06-23 00:07:42 -070030
Dave Hansene1785e82005-06-23 00:07:49 -070031config DISCONTIGMEM_MANUAL
Dave Hansenf3519f92005-09-16 19:27:54 -070032 bool "Discontiguous Memory"
Dave Hansen3a9da762005-06-23 00:07:42 -070033 depends on ARCH_DISCONTIGMEM_ENABLE
34 help
Dave Hansen785dcd42005-06-23 00:07:50 -070035 This option provides enhanced support for discontiguous
36 memory systems, over FLATMEM. These systems have holes
37 in their physical address spaces, and this option provides
38 more efficient handling of these holes. However, the vast
39 majority of hardware has quite flat address spaces, and
Philipp Marekad3d0a32007-10-20 02:46:58 +020040 can have degraded performance from the extra overhead that
Dave Hansen785dcd42005-06-23 00:07:50 -070041 this option imposes.
42
43 Many NUMA configurations will have this as the only option.
44
Dave Hansen3a9da762005-06-23 00:07:42 -070045 If unsure, choose "Flat Memory" over this option.
46
Andy Whitcroftd41dee32005-06-23 00:07:54 -070047config SPARSEMEM_MANUAL
48 bool "Sparse Memory"
49 depends on ARCH_SPARSEMEM_ENABLE
50 help
51 This will be the only option for some systems, including
52 memory hotplug systems. This is normal.
53
54 For many other systems, this will be an alternative to
Dave Hansenf3519f92005-09-16 19:27:54 -070055 "Discontiguous Memory". This option provides some potential
Andy Whitcroftd41dee32005-06-23 00:07:54 -070056 performance benefits, along with decreased code complexity,
57 but it is newer, and more experimental.
58
59 If unsure, choose "Discontiguous Memory" or "Flat Memory"
60 over this option.
61
Dave Hansen3a9da762005-06-23 00:07:42 -070062endchoice
63
Dave Hansene1785e82005-06-23 00:07:49 -070064config DISCONTIGMEM
65 def_bool y
66 depends on (!SELECT_MEMORY_MODEL && ARCH_DISCONTIGMEM_ENABLE) || DISCONTIGMEM_MANUAL
67
Andy Whitcroftd41dee32005-06-23 00:07:54 -070068config SPARSEMEM
69 def_bool y
Russell King1a83e172009-10-26 16:50:12 -070070 depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
Andy Whitcroftd41dee32005-06-23 00:07:54 -070071
Dave Hansene1785e82005-06-23 00:07:49 -070072config FLATMEM
73 def_bool y
Andy Whitcroftd41dee32005-06-23 00:07:54 -070074 depends on (!DISCONTIGMEM && !SPARSEMEM) || FLATMEM_MANUAL
75
76config FLAT_NODE_MEM_MAP
77 def_bool y
78 depends on !SPARSEMEM
Dave Hansene1785e82005-06-23 00:07:49 -070079
Dave Hansen93b75042005-06-23 00:07:47 -070080#
81# Both the NUMA code and DISCONTIGMEM use arrays of pg_data_t's
82# to represent different areas of memory. This variable allows
83# those dependencies to exist individually.
84#
85config NEED_MULTIPLE_NODES
86 def_bool y
87 depends on DISCONTIGMEM || NUMA
Andy Whitcroftaf705362005-06-23 00:07:53 -070088
89config HAVE_MEMORY_PRESENT
90 def_bool y
Andy Whitcroftd41dee32005-06-23 00:07:54 -070091 depends on ARCH_HAVE_MEMORY_PRESENT || SPARSEMEM
Bob Picco802f1922005-09-03 15:54:26 -070092
93#
Bob Picco3e347262005-09-03 15:54:28 -070094# SPARSEMEM_EXTREME (which is the default) does some bootmem
Matt LaPlante84eb8d02006-10-03 22:53:09 +020095# allocations when memory_present() is called. If this cannot
Bob Picco3e347262005-09-03 15:54:28 -070096# be done on your architecture, select this option. However,
97# statically allocating the mem_section[] array can potentially
98# consume vast quantities of .bss, so be careful.
99#
100# This option will also potentially produce smaller runtime code
101# with gcc 3.4 and later.
102#
103config SPARSEMEM_STATIC
Jan Beulich9ba16082008-10-15 22:01:38 -0700104 bool
Bob Picco3e347262005-09-03 15:54:28 -0700105
106#
Matt LaPlante44c09202006-10-03 22:34:14 +0200107# Architecture platforms which require a two level mem_section in SPARSEMEM
Bob Picco802f1922005-09-03 15:54:26 -0700108# must select this option. This is usually for architecture platforms with
109# an extremely sparse physical address space.
110#
Bob Picco3e347262005-09-03 15:54:28 -0700111config SPARSEMEM_EXTREME
112 def_bool y
113 depends on SPARSEMEM && !SPARSEMEM_STATIC
Hugh Dickins4c21e2f2005-10-29 18:16:40 -0700114
Andy Whitcroft29c71112007-10-16 01:24:14 -0700115config SPARSEMEM_VMEMMAP_ENABLE
Jan Beulich9ba16082008-10-15 22:01:38 -0700116 bool
Andy Whitcroft29c71112007-10-16 01:24:14 -0700117
118config SPARSEMEM_VMEMMAP
Geoff Levanda5ee6da2007-12-17 16:19:53 -0800119 bool "Sparse Memory virtual memmap"
120 depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE
121 default y
122 help
123 SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise
124 pfn_to_page and page_to_pfn operations. This is the most
125 efficient option when sufficient kernel resources are available.
Andy Whitcroft29c71112007-10-16 01:24:14 -0700126
Dave Hansen3947be12005-10-29 18:16:54 -0700127# eventually, we can have this option just 'select SPARSEMEM'
128config MEMORY_HOTPLUG
129 bool "Allow for memory hot-add"
Keith Manntheyec69acb2006-09-30 23:27:05 -0700130 depends on SPARSEMEM || X86_64_ACPI_NUMA
Andi Kleen6ad696d2009-11-17 14:06:22 -0800131 depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG
Kumar Galaed84a072009-10-16 07:21:36 +0000132 depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
Dave Hansen3947be12005-10-29 18:16:54 -0700133
Keith Manntheyec69acb2006-09-30 23:27:05 -0700134config MEMORY_HOTPLUG_SPARSE
135 def_bool y
136 depends on SPARSEMEM && MEMORY_HOTPLUG
137
KAMEZAWA Hiroyuki0c0e6192007-10-16 01:26:12 -0700138config MEMORY_HOTREMOVE
139 bool "Allow for memory hot remove"
140 depends on MEMORY_HOTPLUG && ARCH_ENABLE_MEMORY_HOTREMOVE
141 depends on MIGRATION
142
Christoph Lametere20b8cc2008-04-28 02:12:55 -0700143#
144# If we have space for more page flags then we can enable additional
145# optimizations and functionality.
146#
147# Regular Sparsemem takes page flag bits for the sectionid if it does not
148# use a virtual memmap. Disable extended page flags for 32 bit platforms
149# that require the use of a sectionid in the page flags.
150#
151config PAGEFLAGS_EXTENDED
152 def_bool y
H. Peter Anvina269cca2009-08-31 11:17:44 -0700153 depends on 64BIT || SPARSEMEM_VMEMMAP || !SPARSEMEM
Christoph Lametere20b8cc2008-04-28 02:12:55 -0700154
Hugh Dickins4c21e2f2005-10-29 18:16:40 -0700155# Heavily threaded applications may benefit from splitting the mm-wide
156# page_table_lock, so that faults on different parts of the user address
157# space can be handled with less contention: split it at this NR_CPUS.
158# Default to 4 for wider testing, though 8 might be more appropriate.
159# ARM's adjust_pte (unused if VIPT) depends on mm-wide page_table_lock.
Hugh Dickins7b6ac9d2005-11-23 13:37:37 -0800160# PA-RISC 7xxx's spinlock_t would enlarge struct page from 32 to 44 bytes.
Hugh Dickinsa70caa82009-12-14 17:59:02 -0800161# DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC spinlock_t also enlarge struct page.
Hugh Dickins4c21e2f2005-10-29 18:16:40 -0700162#
163config SPLIT_PTLOCK_CPUS
164 int
Hugh Dickinsa70caa82009-12-14 17:59:02 -0800165 default "999999" if ARM && !CPU_CACHE_VIPT
166 default "999999" if PARISC && !PA20
167 default "999999" if DEBUG_SPINLOCK || DEBUG_LOCK_ALLOC
Hugh Dickins4c21e2f2005-10-29 18:16:40 -0700168 default "4"
Christoph Lameter7cbe34c2006-01-08 01:00:49 -0800169
170#
171# support for page migration
172#
173config MIGRATION
Christoph Lameterb20a3502006-03-22 00:09:12 -0800174 bool "Page migration"
Christoph Lameter6c5240a2006-06-23 02:03:37 -0700175 def_bool y
Gerald Schaefer83d16742008-07-23 21:28:22 -0700176 depends on NUMA || ARCH_ENABLE_MEMORY_HOTREMOVE
Christoph Lameterb20a3502006-03-22 00:09:12 -0800177 help
178 Allows the migration of the physical location of pages of processes
179 while the virtual addresses are not changed. This is useful for
180 example on NUMA systems to put pages nearer to the processors accessing
181 the page.
Greg Kroah-Hartman6550e072006-06-12 17:11:31 -0700182
Jeremy Fitzhardinge600715d2008-09-11 01:31:45 -0700183config PHYS_ADDR_T_64BIT
184 def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
185
Christoph Lameter4b51d662007-02-10 01:43:10 -0800186config ZONE_DMA_FLAG
187 int
188 default "0" if !ZONE_DMA
189 default "1"
190
Christoph Lameter2a7326b2007-07-17 04:03:37 -0700191config BOUNCE
192 def_bool y
193 depends on BLOCK && MMU && (ZONE_DMA || HIGHMEM)
194
Christoph Lameter6225e932007-05-06 14:49:50 -0700195config NR_QUICK
196 int
197 depends on QUICKLIST
Haavard Skinnemoen38510752008-01-14 23:35:32 +0100198 default "2" if SUPERH || AVR32
Christoph Lameter6225e932007-05-06 14:49:50 -0700199 default "1"
Stephen Rothwellf057eac2007-07-15 23:40:05 -0700200
201config VIRT_TO_BUS
202 def_bool y
203 depends on !ARCH_NO_VIRT_TO_BUS
Andrea Arcangelicddb8a52008-07-28 15:46:29 -0700204
205config MMU_NOTIFIER
206 bool
David Howellsfc4d5c22009-05-06 16:03:05 -0700207
Hugh Dickinsf8af4da2009-09-21 17:01:57 -0700208config KSM
209 bool "Enable KSM for page merging"
210 depends on MMU
211 help
212 Enable Kernel Samepage Merging: KSM periodically scans those areas
213 of an application's address space that an app has advised may be
214 mergeable. When it finds pages of identical content, it replaces
Hugh Dickinsd0f209f2009-12-14 17:59:34 -0800215 the many instances by a single page with that content, so
Hugh Dickinsf8af4da2009-09-21 17:01:57 -0700216 saving memory until one or another app needs to modify the content.
217 Recommended for use with KVM, or with other duplicative applications.
Hugh Dickinsc73602a2009-10-07 16:32:22 -0700218 See Documentation/vm/ksm.txt for more information: KSM is inactive
219 until a program has madvised that an area is MADV_MERGEABLE, and
220 root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set).
Hugh Dickinsf8af4da2009-09-21 17:01:57 -0700221
Christoph Lametere0a94c22009-06-03 16:04:31 -0400222config DEFAULT_MMAP_MIN_ADDR
223 int "Low address space to protect from user allocation"
David Howells6e141542009-12-15 19:27:45 +0000224 depends on MMU
Christoph Lametere0a94c22009-06-03 16:04:31 -0400225 default 4096
226 help
227 This is the portion of low virtual memory which should be protected
228 from userspace allocation. Keeping a user from writing to low pages
229 can help reduce the impact of kernel NULL pointer bugs.
230
231 For most ia64, ppc64 and x86 users with lots of address space
232 a value of 65536 is reasonable and should cause no problems.
233 On arm and other archs it should not be higher than 32768.
Eric Paris788084a2009-07-31 12:54:11 -0400234 Programs which use vm86 functionality or have some need to map
235 this low address space will need CAP_SYS_RAWIO or disable this
236 protection by setting the value to 0.
Christoph Lametere0a94c22009-06-03 16:04:31 -0400237
238 This value can be changed after boot using the
239 /proc/sys/vm/mmap_min_addr tunable.
240
Linus Torvaldsd949f362009-09-26 09:35:07 -0700241config ARCH_SUPPORTS_MEMORY_FAILURE
242 bool
Christoph Lametere0a94c22009-06-03 16:04:31 -0400243
Andi Kleen6a460792009-09-16 11:50:15 +0200244config MEMORY_FAILURE
245 depends on MMU
Linus Torvaldsd949f362009-09-26 09:35:07 -0700246 depends on ARCH_SUPPORTS_MEMORY_FAILURE
Andi Kleen6a460792009-09-16 11:50:15 +0200247 bool "Enable recovery from hardware memory errors"
248 help
249 Enables code to recover from some memory failures on systems
250 with MCA recovery. This allows a system to continue running
251 even when some of its memory has uncorrected errors. This requires
252 special hardware support and typically ECC memory.
253
Andi Kleencae681f2009-09-16 11:50:17 +0200254config HWPOISON_INJECT
Andi Kleen413f9ef2009-12-16 12:20:00 +0100255 tristate "HWPoison pages injector"
Andi Kleen27df5062009-12-21 19:56:42 +0100256 depends on MEMORY_FAILURE && DEBUG_KERNEL && PROC_FS
Wu Fengguang478c5ff2009-12-16 12:19:59 +0100257 select PROC_PAGE_MONITOR
Andi Kleencae681f2009-09-16 11:50:17 +0200258
David Howellsfc4d5c22009-05-06 16:03:05 -0700259config NOMMU_INITIAL_TRIM_EXCESS
260 int "Turn on mmap() excess space trimming before booting"
261 depends on !MMU
262 default 1
263 help
264 The NOMMU mmap() frequently needs to allocate large contiguous chunks
265 of memory on which to store mappings, but it can only ask the system
266 allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
267 more than it requires. To deal with this, mmap() is able to trim off
268 the excess and return it to the allocator.
269
270 If trimming is enabled, the excess is trimmed off and returned to the
271 system allocator, which can cause extra fragmentation, particularly
272 if there are a lot of transient processes.
273
274 If trimming is disabled, the excess is kept, but not used, which for
275 long-term mappings means that the space is wasted.
276
277 Trimming can be dynamically controlled through a sysctl option
278 (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
279 excess pages there must be before trimming should occur, or zero if
280 no trimming is to occur.
281
282 This option specifies the initial value of this option. The default
283 of 1 says that all excess pages should be trimmed.
284
285 See Documentation/nommu-mmap.txt for more information.