blob: 0547a7f44d4277768f6c4fc4b407fedd72df39d0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * scsi_scan.c
3 *
4 * Copyright (C) 2000 Eric Youngdale,
5 * Copyright (C) 2002 Patrick Mansfield
6 *
7 * The general scanning/probing algorithm is as follows, exceptions are
8 * made to it depending on device specific flags, compilation options, and
9 * global variable (boot or module load time) settings.
10 *
11 * A specific LUN is scanned via an INQUIRY command; if the LUN has a
Christoph Hellwigf64a1812005-10-31 18:32:08 +010012 * device attached, a scsi_device is allocated and setup for it.
Linus Torvalds1da177e2005-04-16 15:20:36 -070013 *
14 * For every id of every channel on the given host:
15 *
16 * Scan LUN 0; if the target responds to LUN 0 (even if there is no
17 * device or storage attached to LUN 0):
18 *
19 * If LUN 0 has a device attached, allocate and setup a
Christoph Hellwigf64a1812005-10-31 18:32:08 +010020 * scsi_device for it.
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 *
22 * If target is SCSI-3 or up, issue a REPORT LUN, and scan
23 * all of the LUNs returned by the REPORT LUN; else,
24 * sequentially scan LUNs up until some maximum is reached,
25 * or a LUN is seen that cannot have a device attached to it.
26 */
27
Linus Torvalds1da177e2005-04-16 15:20:36 -070028#include <linux/module.h>
29#include <linux/moduleparam.h>
30#include <linux/init.h>
31#include <linux/blkdev.h>
Matthew Wilcox3e082a92006-09-28 15:19:20 -060032#include <linux/delay.h>
33#include <linux/kthread.h>
34#include <linux/spinlock.h>
Arjan van de Ven4ace92f2009-01-04 05:32:28 -080035#include <linux/async.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070036
37#include <scsi/scsi.h>
Christoph Hellwigbeb40482006-06-10 18:01:03 +020038#include <scsi/scsi_cmnd.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070039#include <scsi/scsi_device.h>
40#include <scsi/scsi_driver.h>
41#include <scsi/scsi_devinfo.h>
42#include <scsi/scsi_host.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070043#include <scsi/scsi_transport.h>
44#include <scsi/scsi_eh.h>
45
46#include "scsi_priv.h"
47#include "scsi_logging.h"
48
49#define ALLOC_FAILURE_MSG KERN_ERR "%s: Allocation failure during" \
50 " SCSI scanning, some SCSI devices might not be configured\n"
51
52/*
53 * Default timeout
54 */
55#define SCSI_TIMEOUT (2*HZ)
56
57/*
Robert P. J. Day405ae7d2007-02-17 19:13:42 +010058 * Prefix values for the SCSI id's (stored in sysfs name field)
Linus Torvalds1da177e2005-04-16 15:20:36 -070059 */
60#define SCSI_UID_SER_NUM 'S'
61#define SCSI_UID_UNKNOWN 'Z'
62
63/*
64 * Return values of some of the scanning functions.
65 *
66 * SCSI_SCAN_NO_RESPONSE: no valid response received from the target, this
67 * includes allocation or general failures preventing IO from being sent.
68 *
69 * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is available
70 * on the given LUN.
71 *
72 * SCSI_SCAN_LUN_PRESENT: target responded, and a device is available on a
73 * given LUN.
74 */
75#define SCSI_SCAN_NO_RESPONSE 0
76#define SCSI_SCAN_TARGET_PRESENT 1
77#define SCSI_SCAN_LUN_PRESENT 2
78
Arjan van de Ven0ad78202005-11-28 16:22:25 +010079static const char *scsi_null_device_strs = "nullnullnullnull";
Linus Torvalds1da177e2005-04-16 15:20:36 -070080
81#define MAX_SCSI_LUNS 512
82
83#ifdef CONFIG_SCSI_MULTI_LUN
84static unsigned int max_scsi_luns = MAX_SCSI_LUNS;
85#else
86static unsigned int max_scsi_luns = 1;
87#endif
88
Masatake YAMATO10f4b892007-09-19 22:59:16 +090089module_param_named(max_luns, max_scsi_luns, uint, S_IRUGO|S_IWUSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -070090MODULE_PARM_DESC(max_luns,
91 "last scsi LUN (should be between 1 and 2^32-1)");
92
Matthew Wilcox21db1882006-11-22 13:24:52 -070093#ifdef CONFIG_SCSI_SCAN_ASYNC
94#define SCSI_SCAN_TYPE_DEFAULT "async"
95#else
96#define SCSI_SCAN_TYPE_DEFAULT "sync"
97#endif
98
99static char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT;
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600100
101module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO);
102MODULE_PARM_DESC(scan, "sync, async or none");
103
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104/*
105 * max_scsi_report_luns: the maximum number of LUNS that will be
106 * returned from the REPORT LUNS command. 8 times this value must
107 * be allocated. In theory this could be up to an 8 byte value, but
108 * in practice, the maximum number of LUNs suppored by any device
109 * is about 16k.
110 */
111static unsigned int max_scsi_report_luns = 511;
112
Masatake YAMATO10f4b892007-09-19 22:59:16 +0900113module_param_named(max_report_luns, max_scsi_report_luns, uint, S_IRUGO|S_IWUSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114MODULE_PARM_DESC(max_report_luns,
115 "REPORT LUNS maximum number of LUNS received (should be"
116 " between 1 and 16384)");
117
Alan Stern14faf122009-03-12 11:08:51 -0400118static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119
Masatake YAMATO10f4b892007-09-19 22:59:16 +0900120module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700121MODULE_PARM_DESC(inq_timeout,
122 "Timeout (in seconds) waiting for devices to answer INQUIRY."
Alan Stern14faf122009-03-12 11:08:51 -0400123 " Default is 20. Some devices may need more; most need less.");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124
Matthew Wilcox6b7f1232007-06-26 15:18:51 -0600125/* This lock protects only this list */
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600126static DEFINE_SPINLOCK(async_scan_lock);
127static LIST_HEAD(scanning_hosts);
128
129struct async_scan_data {
130 struct list_head list;
131 struct Scsi_Host *shost;
132 struct completion prev_finished;
133};
134
135/**
136 * scsi_complete_async_scans - Wait for asynchronous scans to complete
137 *
Matthew Wilcox8bcc2412006-12-07 19:29:27 -0700138 * When this function returns, any host which started scanning before
139 * this function was called will have finished its scan. Hosts which
140 * started scanning after this function was called may or may not have
141 * finished.
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600142 */
143int scsi_complete_async_scans(void)
144{
145 struct async_scan_data *data;
146
147 do {
148 if (list_empty(&scanning_hosts))
149 return 0;
150 /* If we can't get memory immediately, that's OK. Just
151 * sleep a little. Even if we never get memory, the async
152 * scans will finish eventually.
153 */
154 data = kmalloc(sizeof(*data), GFP_KERNEL);
155 if (!data)
156 msleep(1);
157 } while (!data);
158
159 data->shost = NULL;
160 init_completion(&data->prev_finished);
161
162 spin_lock(&async_scan_lock);
163 /* Check that there's still somebody else on the list */
164 if (list_empty(&scanning_hosts))
165 goto done;
166 list_add_tail(&data->list, &scanning_hosts);
167 spin_unlock(&async_scan_lock);
168
169 printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n");
170 wait_for_completion(&data->prev_finished);
171
172 spin_lock(&async_scan_lock);
173 list_del(&data->list);
Matthew Wilcox8bcc2412006-12-07 19:29:27 -0700174 if (!list_empty(&scanning_hosts)) {
175 struct async_scan_data *next = list_entry(scanning_hosts.next,
176 struct async_scan_data, list);
177 complete(&next->prev_finished);
178 }
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600179 done:
180 spin_unlock(&async_scan_lock);
181
182 kfree(data);
183 return 0;
184}
185
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600186/* Only exported for the benefit of scsi_wait_scan */
187EXPORT_SYMBOL_GPL(scsi_complete_async_scans);
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600188
Hugh Dickinsf2f027c2007-05-23 14:41:42 -0700189#ifndef MODULE
190/*
191 * For async scanning we need to wait for all the scans to complete before
192 * trying to mount the root fs. Otherwise non-modular drivers may not be ready
193 * yet.
194 */
195late_initcall(scsi_complete_async_scans);
196#endif
197
Linus Torvalds1da177e2005-04-16 15:20:36 -0700198/**
199 * scsi_unlock_floptical - unlock device via a special MODE SENSE command
James Bottomley39216032005-06-15 18:48:29 -0500200 * @sdev: scsi device to send command to
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201 * @result: area to store the result of the MODE SENSE
202 *
203 * Description:
James Bottomley39216032005-06-15 18:48:29 -0500204 * Send a vendor specific MODE SENSE (not a MODE SELECT) command.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205 * Called for BLIST_KEY devices.
206 **/
James Bottomley39216032005-06-15 18:48:29 -0500207static void scsi_unlock_floptical(struct scsi_device *sdev,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700208 unsigned char *result)
209{
210 unsigned char scsi_cmd[MAX_COMMAND_SIZE];
211
212 printk(KERN_NOTICE "scsi: unlocking floptical drive\n");
213 scsi_cmd[0] = MODE_SENSE;
214 scsi_cmd[1] = 0;
215 scsi_cmd[2] = 0x2e;
216 scsi_cmd[3] = 0;
James Bottomley39216032005-06-15 18:48:29 -0500217 scsi_cmd[4] = 0x2a; /* size */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218 scsi_cmd[5] = 0;
James Bottomley39216032005-06-15 18:48:29 -0500219 scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900220 SCSI_TIMEOUT, 3, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221}
222
223/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700224 * scsi_alloc_sdev - allocate and setup a scsi_Device
Rob Landleyeb448202007-11-03 13:30:39 -0500225 * @starget: which target to allocate a &scsi_device for
226 * @lun: which lun
227 * @hostdata: usually NULL and set by ->slave_alloc instead
Linus Torvalds1da177e2005-04-16 15:20:36 -0700228 *
229 * Description:
230 * Allocate, initialize for io, and return a pointer to a scsi_Device.
231 * Stores the @shost, @channel, @id, and @lun in the scsi_Device, and
232 * adds scsi_Device to the appropriate list.
233 *
234 * Return value:
235 * scsi_Device pointer, or NULL on failure.
236 **/
237static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
238 unsigned int lun, void *hostdata)
239{
240 struct scsi_device *sdev;
241 int display_failure_msg = 1, ret;
242 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
Jeff Garzika341cd02007-10-29 17:15:22 -0400243 extern void scsi_evt_thread(struct work_struct *work);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700244
Jes Sorensen24669f752006-01-16 10:31:18 -0500245 sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246 GFP_ATOMIC);
247 if (!sdev)
248 goto out;
249
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250 sdev->vendor = scsi_null_device_strs;
251 sdev->model = scsi_null_device_strs;
252 sdev->rev = scsi_null_device_strs;
253 sdev->host = shost;
254 sdev->id = starget->id;
255 sdev->lun = lun;
256 sdev->channel = starget->channel;
257 sdev->sdev_state = SDEV_CREATED;
258 INIT_LIST_HEAD(&sdev->siblings);
259 INIT_LIST_HEAD(&sdev->same_target_siblings);
260 INIT_LIST_HEAD(&sdev->cmd_list);
261 INIT_LIST_HEAD(&sdev->starved_entry);
Jeff Garzika341cd02007-10-29 17:15:22 -0400262 INIT_LIST_HEAD(&sdev->event_list);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700263 spin_lock_init(&sdev->list_lock);
Jeff Garzika341cd02007-10-29 17:15:22 -0400264 INIT_WORK(&sdev->event_work, scsi_evt_thread);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265
266 sdev->sdev_gendev.parent = get_device(&starget->dev);
267 sdev->sdev_target = starget;
268
269 /* usually NULL and set by ->slave_alloc instead */
270 sdev->hostdata = hostdata;
271
272 /* if the device needs this changing, it may do so in the
273 * slave_configure function */
274 sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED;
275
276 /*
277 * Some low level driver could use device->type
278 */
279 sdev->type = -1;
280
281 /*
282 * Assume that the device will have handshaking problems,
283 * and then fix this field later if it turns out it
284 * doesn't
285 */
286 sdev->borken = 1;
287
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288 sdev->request_queue = scsi_alloc_queue(sdev);
289 if (!sdev->request_queue) {
290 /* release fn is set up in scsi_sysfs_device_initialise, so
291 * have to free and put manually here */
292 put_device(&starget->dev);
Dave Jones93f56082006-03-09 10:21:27 -0500293 kfree(sdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294 goto out;
295 }
296
297 sdev->request_queue->queuedata = sdev;
298 scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
299
300 scsi_sysfs_device_initialize(sdev);
301
302 if (shost->hostt->slave_alloc) {
303 ret = shost->hostt->slave_alloc(sdev);
304 if (ret) {
305 /*
306 * if LLDD reports slave not present, don't clutter
307 * console with alloc failure messages
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 */
309 if (ret == -ENXIO)
310 display_failure_msg = 0;
311 goto out_device_destroy;
312 }
313 }
314
315 return sdev;
316
317out_device_destroy:
James Smartc2f9e492009-01-27 11:41:36 -0500318 scsi_device_set_state(sdev, SDEV_DEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 transport_destroy_device(&sdev->sdev_gendev);
James Bottomley37e6ba02009-10-02 13:30:08 -0500320 put_device(&sdev->sdev_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321 put_device(&sdev->sdev_gendev);
322out:
323 if (display_failure_msg)
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -0700324 printk(ALLOC_FAILURE_MSG, __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700325 return NULL;
326}
327
James Bottomley643eb2d2008-03-22 22:42:27 -0500328static void scsi_target_destroy(struct scsi_target *starget)
329{
330 struct device *dev = &starget->dev;
331 struct Scsi_Host *shost = dev_to_shost(dev->parent);
332 unsigned long flags;
333
334 transport_destroy_device(dev);
335 spin_lock_irqsave(shost->host_lock, flags);
336 if (shost->hostt->target_destroy)
337 shost->hostt->target_destroy(starget);
338 list_del_init(&starget->siblings);
339 spin_unlock_irqrestore(shost->host_lock, flags);
340 put_device(dev);
341}
342
Linus Torvalds1da177e2005-04-16 15:20:36 -0700343static void scsi_target_dev_release(struct device *dev)
344{
345 struct device *parent = dev->parent;
346 struct scsi_target *starget = to_scsi_target(dev);
James Bottomleya283bd32005-05-24 12:06:38 -0500347
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348 kfree(starget);
349 put_device(parent);
350}
351
Adrian Bunk453cd0f2008-07-03 23:47:33 -0700352static struct device_type scsi_target_type = {
Hannes Reineckeb0ed4332008-03-18 14:32:28 +0100353 .name = "scsi_target",
354 .release = scsi_target_dev_release,
355};
356
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357int scsi_is_target_device(const struct device *dev)
358{
Hannes Reineckeb0ed4332008-03-18 14:32:28 +0100359 return dev->type == &scsi_target_type;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360}
361EXPORT_SYMBOL(scsi_is_target_device);
362
363static struct scsi_target *__scsi_find_target(struct device *parent,
364 int channel, uint id)
365{
366 struct scsi_target *starget, *found_starget = NULL;
367 struct Scsi_Host *shost = dev_to_shost(parent);
368 /*
369 * Search for an existing target for this sdev.
370 */
371 list_for_each_entry(starget, &shost->__targets, siblings) {
372 if (starget->id == id &&
373 starget->channel == channel) {
374 found_starget = starget;
375 break;
376 }
377 }
378 if (found_starget)
379 get_device(&found_starget->dev);
380
381 return found_starget;
382}
383
James Bottomley884d25c2006-09-05 16:26:41 -0500384/**
385 * scsi_alloc_target - allocate a new or find an existing target
386 * @parent: parent of the target (need not be a scsi host)
387 * @channel: target channel number (zero if no channels)
388 * @id: target id number
389 *
390 * Return an existing target if one exists, provided it hasn't already
391 * gone into STARGET_DEL state, otherwise allocate a new target.
392 *
393 * The target is returned with an incremented reference, so the caller
394 * is responsible for both reaping and doing a last put
395 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396static struct scsi_target *scsi_alloc_target(struct device *parent,
397 int channel, uint id)
398{
399 struct Scsi_Host *shost = dev_to_shost(parent);
400 struct device *dev = NULL;
401 unsigned long flags;
402 const int size = sizeof(struct scsi_target)
403 + shost->transportt->target_size;
James.Smart@Emulex.Com5c44cd22005-06-10 22:24:30 -0400404 struct scsi_target *starget;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 struct scsi_target *found_target;
Brian King32f95792006-02-22 14:28:24 -0600406 int error;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407
Jes Sorensen24669f752006-01-16 10:31:18 -0500408 starget = kzalloc(size, GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700409 if (!starget) {
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -0700410 printk(KERN_ERR "%s: allocation failure\n", __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700411 return NULL;
412 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 dev = &starget->dev;
414 device_initialize(dev);
415 starget->reap_ref = 1;
416 dev->parent = get_device(parent);
Kay Sievers71610f52008-12-03 22:41:36 +0100417 dev_set_name(dev, "target%d:%d:%d", shost->host_no, channel, id);
Hannes Reineckeb0ed4332008-03-18 14:32:28 +0100418#ifndef CONFIG_SYSFS_DEPRECATED
419 dev->bus = &scsi_bus_type;
420#endif
421 dev->type = &scsi_target_type;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 starget->id = id;
423 starget->channel = channel;
Mike Christief0c0a372008-08-17 15:24:38 -0500424 starget->can_queue = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425 INIT_LIST_HEAD(&starget->siblings);
426 INIT_LIST_HEAD(&starget->devices);
James Bottomley643eb2d2008-03-22 22:42:27 -0500427 starget->state = STARGET_CREATED;
Alan Stern7c9d6f12007-01-08 11:12:32 -0500428 starget->scsi_level = SCSI_2;
Edward Gogginc53a2842009-04-09 10:02:22 -0700429 starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
James Bottomleyffedb452006-02-23 14:27:18 -0600430 retry:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431 spin_lock_irqsave(shost->host_lock, flags);
432
433 found_target = __scsi_find_target(parent, channel, id);
434 if (found_target)
435 goto found;
436
437 list_add_tail(&starget->siblings, &shost->__targets);
438 spin_unlock_irqrestore(shost->host_lock, flags);
439 /* allocate and add */
James Bottomleya283bd32005-05-24 12:06:38 -0500440 transport_setup_device(dev);
James Bottomleya283bd32005-05-24 12:06:38 -0500441 if (shost->hostt->target_alloc) {
Brian King32f95792006-02-22 14:28:24 -0600442 error = shost->hostt->target_alloc(starget);
James Bottomleya283bd32005-05-24 12:06:38 -0500443
444 if(error) {
445 dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error);
446 /* don't want scsi_target_reap to do the final
447 * put because it will be under the host lock */
James Bottomley643eb2d2008-03-22 22:42:27 -0500448 scsi_target_destroy(starget);
James Bottomleya283bd32005-05-24 12:06:38 -0500449 return NULL;
450 }
451 }
James Bottomley884d25c2006-09-05 16:26:41 -0500452 get_device(dev);
James Bottomleya283bd32005-05-24 12:06:38 -0500453
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454 return starget;
455
456 found:
457 found_target->reap_ref++;
458 spin_unlock_irqrestore(shost->host_lock, flags);
James Bottomleyffedb452006-02-23 14:27:18 -0600459 if (found_target->state != STARGET_DEL) {
James Bottomley884d25c2006-09-05 16:26:41 -0500460 put_device(parent);
James Bottomleyffedb452006-02-23 14:27:18 -0600461 kfree(starget);
462 return found_target;
463 }
464 /* Unfortunately, we found a dying target; need to
465 * wait until it's dead before we can get a new one */
466 put_device(&found_target->dev);
467 flush_scheduled_work();
468 goto retry;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469}
470
David Howells65f27f32006-11-22 14:55:48 +0000471static void scsi_target_reap_usercontext(struct work_struct *work)
James Bottomley65110b22006-02-14 10:48:46 -0600472{
David Howells65f27f32006-11-22 14:55:48 +0000473 struct scsi_target *starget =
474 container_of(work, struct scsi_target, ew.work);
James Bottomley863a9302005-12-15 20:01:43 -0800475
James Bottomleyffedb452006-02-23 14:27:18 -0600476 transport_remove_device(&starget->dev);
477 device_del(&starget->dev);
James Bottomley643eb2d2008-03-22 22:42:27 -0500478 scsi_target_destroy(starget);
James Bottomley863a9302005-12-15 20:01:43 -0800479}
480
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481/**
482 * scsi_target_reap - check to see if target is in use and destroy if not
Linus Torvalds1da177e2005-04-16 15:20:36 -0700483 * @starget: target to be checked
484 *
485 * This is used after removing a LUN or doing a last put of the target
486 * it checks atomically that nothing is using the target and removes
487 * it if so.
488 */
489void scsi_target_reap(struct scsi_target *starget)
490{
James Bottomleyffedb452006-02-23 14:27:18 -0600491 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
492 unsigned long flags;
James Bottomley643eb2d2008-03-22 22:42:27 -0500493 enum scsi_target_state state;
494 int empty;
James Bottomleyffedb452006-02-23 14:27:18 -0600495
496 spin_lock_irqsave(shost->host_lock, flags);
James Bottomley643eb2d2008-03-22 22:42:27 -0500497 state = starget->state;
498 empty = --starget->reap_ref == 0 &&
499 list_empty(&starget->devices) ? 1 : 0;
James Bottomleyffedb452006-02-23 14:27:18 -0600500 spin_unlock_irqrestore(shost->host_lock, flags);
501
James Bottomley643eb2d2008-03-22 22:42:27 -0500502 if (!empty)
503 return;
504
505 BUG_ON(state == STARGET_DEL);
506 starget->state = STARGET_DEL;
507 if (state == STARGET_CREATED)
508 scsi_target_destroy(starget);
509 else
510 execute_in_process_context(scsi_target_reap_usercontext,
511 &starget->ew);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700512}
513
514/**
Alan Sterne5b3cd42006-08-21 15:53:25 -0400515 * sanitize_inquiry_string - remove non-graphical chars from an INQUIRY result string
516 * @s: INQUIRY result string to sanitize
517 * @len: length of the string
518 *
519 * Description:
520 * The SCSI spec says that INQUIRY vendor, product, and revision
521 * strings must consist entirely of graphic ASCII characters,
522 * padded on the right with spaces. Since not all devices obey
523 * this rule, we will replace non-graphic or non-ASCII characters
524 * with spaces. Exception: a NUL character is interpreted as a
525 * string terminator, so all the following characters are set to
526 * spaces.
527 **/
528static void sanitize_inquiry_string(unsigned char *s, int len)
529{
530 int terminated = 0;
531
532 for (; len > 0; (--len, ++s)) {
533 if (*s == 0)
534 terminated = 1;
535 if (terminated || *s < 0x20 || *s > 0x7e)
536 *s = ' ';
537 }
538}
539
540/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700541 * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
James Bottomley39216032005-06-15 18:48:29 -0500542 * @sdev: scsi_device to probe
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 * @inq_result: area to store the INQUIRY result
James Bottomley39216032005-06-15 18:48:29 -0500544 * @result_len: len of inq_result
Linus Torvalds1da177e2005-04-16 15:20:36 -0700545 * @bflags: store any bflags found here
546 *
547 * Description:
James Bottomley39216032005-06-15 18:48:29 -0500548 * Probe the lun associated with @req using a standard SCSI INQUIRY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 *
James Bottomley39216032005-06-15 18:48:29 -0500550 * If the INQUIRY is successful, zero is returned and the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700551 * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
Christoph Hellwigf64a1812005-10-31 18:32:08 +0100552 * are copied to the scsi_device any flags value is stored in *@bflags.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700553 **/
Alan Sterne5b3cd42006-08-21 15:53:25 -0400554static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
James Bottomley39216032005-06-15 18:48:29 -0500555 int result_len, int *bflags)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700556{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700557 unsigned char scsi_cmd[MAX_COMMAND_SIZE];
558 int first_inquiry_len, try_inquiry_len, next_inquiry_len;
559 int response_len = 0;
James Bottomley39216032005-06-15 18:48:29 -0500560 int pass, count, result;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700561 struct scsi_sense_hdr sshdr;
562
563 *bflags = 0;
564
565 /* Perform up to 3 passes. The first pass uses a conservative
566 * transfer length of 36 unless sdev->inquiry_len specifies a
567 * different value. */
568 first_inquiry_len = sdev->inquiry_len ? sdev->inquiry_len : 36;
569 try_inquiry_len = first_inquiry_len;
570 pass = 1;
571
572 next_pass:
James Bottomley9ccfc752005-10-02 11:45:08 -0500573 SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
574 "scsi scan: INQUIRY pass %d length %d\n",
575 pass, try_inquiry_len));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576
577 /* Each pass gets up to three chances to ignore Unit Attention */
578 for (count = 0; count < 3; ++count) {
FUJITA Tomonori5cd3bbf2008-12-05 11:21:46 +0900579 int resid;
580
Linus Torvalds1da177e2005-04-16 15:20:36 -0700581 memset(scsi_cmd, 0, 6);
582 scsi_cmd[0] = INQUIRY;
583 scsi_cmd[4] = (unsigned char) try_inquiry_len;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700584
585 memset(inq_result, 0, try_inquiry_len);
James Bottomley39216032005-06-15 18:48:29 -0500586
587 result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
James Bottomleyea73a9f2005-08-28 11:33:52 -0500588 inq_result, try_inquiry_len, &sshdr,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900589 HZ / 2 + HZ * scsi_inq_timeout, 3,
FUJITA Tomonori5cd3bbf2008-12-05 11:21:46 +0900590 &resid);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591
592 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s "
593 "with code 0x%x\n",
James Bottomley39216032005-06-15 18:48:29 -0500594 result ? "failed" : "successful", result));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595
James Bottomley39216032005-06-15 18:48:29 -0500596 if (result) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700597 /*
598 * not-ready to ready transition [asc/ascq=0x28/0x0]
599 * or power-on, reset [asc/ascq=0x29/0x0], continue.
600 * INQUIRY should not yield UNIT_ATTENTION
601 * but many buggy devices do so anyway.
602 */
James Bottomley39216032005-06-15 18:48:29 -0500603 if ((driver_byte(result) & DRIVER_SENSE) &&
James Bottomleyea73a9f2005-08-28 11:33:52 -0500604 scsi_sense_valid(&sshdr)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700605 if ((sshdr.sense_key == UNIT_ATTENTION) &&
606 ((sshdr.asc == 0x28) ||
607 (sshdr.asc == 0x29)) &&
608 (sshdr.ascq == 0))
609 continue;
610 }
FUJITA Tomonori5cd3bbf2008-12-05 11:21:46 +0900611 } else {
612 /*
613 * if nothing was transferred, we try
614 * again. It's a workaround for some USB
615 * devices.
616 */
617 if (resid == try_inquiry_len)
618 continue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619 }
620 break;
621 }
622
James Bottomley39216032005-06-15 18:48:29 -0500623 if (result == 0) {
Alan Sterne5b3cd42006-08-21 15:53:25 -0400624 sanitize_inquiry_string(&inq_result[8], 8);
625 sanitize_inquiry_string(&inq_result[16], 16);
626 sanitize_inquiry_string(&inq_result[32], 4);
627
628 response_len = inq_result[4] + 5;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700629 if (response_len > 255)
630 response_len = first_inquiry_len; /* sanity */
631
632 /*
633 * Get any flags for this device.
634 *
Christoph Hellwigf64a1812005-10-31 18:32:08 +0100635 * XXX add a bflags to scsi_device, and replace the
636 * corresponding bit fields in scsi_device, so bflags
Linus Torvalds1da177e2005-04-16 15:20:36 -0700637 * need not be passed as an argument.
638 */
639 *bflags = scsi_get_device_flags(sdev, &inq_result[8],
640 &inq_result[16]);
641
642 /* When the first pass succeeds we gain information about
643 * what larger transfer lengths might work. */
644 if (pass == 1) {
645 if (BLIST_INQUIRY_36 & *bflags)
646 next_inquiry_len = 36;
647 else if (BLIST_INQUIRY_58 & *bflags)
648 next_inquiry_len = 58;
649 else if (sdev->inquiry_len)
650 next_inquiry_len = sdev->inquiry_len;
651 else
652 next_inquiry_len = response_len;
653
654 /* If more data is available perform the second pass */
655 if (next_inquiry_len > try_inquiry_len) {
656 try_inquiry_len = next_inquiry_len;
657 pass = 2;
658 goto next_pass;
659 }
660 }
661
662 } else if (pass == 2) {
663 printk(KERN_INFO "scsi scan: %d byte inquiry failed. "
664 "Consider BLIST_INQUIRY_36 for this device\n",
665 try_inquiry_len);
666
667 /* If this pass failed, the third pass goes back and transfers
668 * the same amount as we successfully got in the first pass. */
669 try_inquiry_len = first_inquiry_len;
670 pass = 3;
671 goto next_pass;
672 }
673
674 /* If the last transfer attempt got an error, assume the
675 * peripheral doesn't exist or is dead. */
James Bottomley39216032005-06-15 18:48:29 -0500676 if (result)
677 return -EIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700678
679 /* Don't report any more data than the device says is valid */
680 sdev->inquiry_len = min(try_inquiry_len, response_len);
681
682 /*
683 * XXX Abort if the response length is less than 36? If less than
684 * 32, the lookup of the device flags (above) could be invalid,
685 * and it would be possible to take an incorrect action - we do
686 * not want to hang because of a short INQUIRY. On the flip side,
687 * if the device is spun down or becoming ready (and so it gives a
688 * short INQUIRY), an abort here prevents any further use of the
689 * device, including spin up.
690 *
Alan Sterne423ee32007-02-16 01:46:38 -0800691 * On the whole, the best approach seems to be to assume the first
692 * 36 bytes are valid no matter what the device says. That's
693 * better than copying < 36 bytes to the inquiry-result buffer
694 * and displaying garbage for the Vendor, Product, or Revision
695 * strings.
696 */
697 if (sdev->inquiry_len < 36) {
698 printk(KERN_INFO "scsi scan: INQUIRY result too short (%d),"
699 " using 36\n", sdev->inquiry_len);
700 sdev->inquiry_len = 36;
701 }
702
703 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700704 * Related to the above issue:
705 *
706 * XXX Devices (disk or all?) should be sent a TEST UNIT READY,
707 * and if not ready, sent a START_STOP to start (maybe spin up) and
708 * then send the INQUIRY again, since the INQUIRY can change after
709 * a device is initialized.
710 *
711 * Ideally, start a device if explicitly asked to do so. This
712 * assumes that a device is spun up on power on, spun down on
713 * request, and then spun up on request.
714 */
715
716 /*
717 * The scanning code needs to know the scsi_level, even if no
718 * device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so
719 * non-zero LUNs can be scanned.
720 */
721 sdev->scsi_level = inq_result[2] & 0x07;
722 if (sdev->scsi_level >= 2 ||
723 (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1))
724 sdev->scsi_level++;
James Bottomley6f3a2022005-09-22 20:33:28 -0500725 sdev->sdev_target->scsi_level = sdev->scsi_level;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700726
James Bottomley39216032005-06-15 18:48:29 -0500727 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700728}
729
730/**
Christoph Hellwigf64a1812005-10-31 18:32:08 +0100731 * scsi_add_lun - allocate and fully initialze a scsi_device
Matthew Wilcox6d877682007-07-11 12:54:55 -0600732 * @sdev: holds information to be stored in the new scsi_device
Linus Torvalds1da177e2005-04-16 15:20:36 -0700733 * @inq_result: holds the result of a previous INQUIRY to the LUN
734 * @bflags: black/white list flag
Matthew Wilcox6d877682007-07-11 12:54:55 -0600735 * @async: 1 if this device is being scanned asynchronously
Linus Torvalds1da177e2005-04-16 15:20:36 -0700736 *
737 * Description:
Matthew Wilcox6d877682007-07-11 12:54:55 -0600738 * Initialize the scsi_device @sdev. Optionally set fields based
739 * on values in *@bflags.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700740 *
741 * Return:
Christoph Hellwigf64a1812005-10-31 18:32:08 +0100742 * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
743 * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744 **/
Alan Sterne5b3cd42006-08-21 15:53:25 -0400745static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600746 int *bflags, int async)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700747{
James Bottomley6f4267e2008-08-22 16:53:31 -0500748 int ret;
749
Linus Torvalds1da177e2005-04-16 15:20:36 -0700750 /*
751 * XXX do not save the inquiry, since it can change underneath us,
752 * save just vendor/model/rev.
753 *
754 * Rather than save it and have an ioctl that retrieves the saved
755 * value, have an ioctl that executes the same INQUIRY code used
756 * in scsi_probe_lun, let user level programs doing INQUIRY
757 * scanning run at their own risk, or supply a user level program
758 * that can correctly scan.
759 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700760
Alan Stern09123d22006-11-10 12:27:57 -0800761 /*
762 * Copy at least 36 bytes of INQUIRY data, so that we don't
763 * dereference unallocated memory when accessing the Vendor,
764 * Product, and Revision strings. Badly behaved devices may set
765 * the INQUIRY Additional Length byte to a small value, indicating
766 * these strings are invalid, but often they contain plausible data
767 * nonetheless. It doesn't matter if the device sent < 36 bytes
768 * total, since scsi_probe_lun() initializes inq_result with 0s.
769 */
770 sdev->inquiry = kmemdup(inq_result,
771 max_t(size_t, sdev->inquiry_len, 36),
772 GFP_ATOMIC);
773 if (sdev->inquiry == NULL)
774 return SCSI_SCAN_NO_RESPONSE;
775
Linus Torvalds1da177e2005-04-16 15:20:36 -0700776 sdev->vendor = (char *) (sdev->inquiry + 8);
777 sdev->model = (char *) (sdev->inquiry + 16);
778 sdev->rev = (char *) (sdev->inquiry + 32);
779
780 if (*bflags & BLIST_ISROM) {
Matthew Wilcox6d877682007-07-11 12:54:55 -0600781 sdev->type = TYPE_ROM;
782 sdev->removable = 1;
783 } else {
784 sdev->type = (inq_result[0] & 0x1f);
785 sdev->removable = (inq_result[1] & 0x80) >> 7;
786 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700787
Matthew Wilcox6d877682007-07-11 12:54:55 -0600788 switch (sdev->type) {
James Bottomleyddaf6fc2006-12-13 10:10:40 -0600789 case TYPE_RBC:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700790 case TYPE_TAPE:
791 case TYPE_DISK:
792 case TYPE_PRINTER:
793 case TYPE_MOD:
794 case TYPE_PROCESSOR:
795 case TYPE_SCANNER:
796 case TYPE_MEDIUM_CHANGER:
797 case TYPE_ENCLOSURE:
798 case TYPE_COMM:
James Bottomley4d7db042006-03-31 20:07:45 -0600799 case TYPE_RAID:
Boaz Harrosh82443a52009-01-25 16:51:33 +0200800 case TYPE_OSD:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700801 sdev->writeable = 1;
802 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700803 case TYPE_ROM:
James Bottomleyddaf6fc2006-12-13 10:10:40 -0600804 case TYPE_WORM:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805 sdev->writeable = 0;
806 break;
807 default:
808 printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
809 }
810
Matthew Wilcox6d877682007-07-11 12:54:55 -0600811 if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) {
812 /* RBC and MMC devices can return SCSI-3 compliance and yet
813 * still not support REPORT LUNS, so make them act as
814 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
815 * specifically set */
816 if ((*bflags & BLIST_REPORTLUN2) == 0)
817 *bflags |= BLIST_NOREPORTLUN;
818 }
819
Linus Torvalds1da177e2005-04-16 15:20:36 -0700820 /*
821 * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
822 * spec says: The device server is capable of supporting the
823 * specified peripheral device type on this logical unit. However,
824 * the physical device is not currently connected to this logical
825 * unit.
826 *
827 * The above is vague, as it implies that we could treat 001 and
828 * 011 the same. Stay compatible with previous code, and create a
Christoph Hellwigf64a1812005-10-31 18:32:08 +0100829 * scsi_device for a PQ of 1
Linus Torvalds1da177e2005-04-16 15:20:36 -0700830 *
831 * Don't set the device offline here; rather let the upper
832 * level drivers eval the PQ to decide whether they should
833 * attach. So remove ((inq_result[0] >> 5) & 7) == 1 check.
834 */
835
836 sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700837 sdev->lockable = sdev->removable;
838 sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
839
Matthew Wilcox6d877682007-07-11 12:54:55 -0600840 if (sdev->scsi_level >= SCSI_3 ||
841 (sdev->inquiry_len > 56 && inq_result[56] & 0x04))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842 sdev->ppr = 1;
843 if (inq_result[7] & 0x60)
844 sdev->wdtr = 1;
845 if (inq_result[7] & 0x10)
846 sdev->sdtr = 1;
847
James Bottomley19ac0db2006-08-06 18:15:22 -0500848 sdev_printk(KERN_NOTICE, sdev, "%s %.8s %.16s %.4s PQ: %d "
Matthew Wilcox4ff36712006-07-04 12:15:20 -0600849 "ANSI: %d%s\n", scsi_device_type(sdev->type),
850 sdev->vendor, sdev->model, sdev->rev,
851 sdev->inq_periph_qual, inq_result[2] & 0x07,
852 (inq_result[3] & 0x0f) == 1 ? " CCS" : "");
853
Linus Torvalds1da177e2005-04-16 15:20:36 -0700854 if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
855 !(*bflags & BLIST_NOTQ))
856 sdev->tagged_supported = 1;
Matthew Wilcox6d877682007-07-11 12:54:55 -0600857
Linus Torvalds1da177e2005-04-16 15:20:36 -0700858 /*
859 * Some devices (Texel CD ROM drives) have handshaking problems
860 * when used with the Seagate controllers. borken is initialized
861 * to 1, and then set it to 0 here.
862 */
863 if ((*bflags & BLIST_BORKEN) == 0)
864 sdev->borken = 0;
865
Matthew Wilcox6d877682007-07-11 12:54:55 -0600866 if (*bflags & BLIST_NO_ULD_ATTACH)
867 sdev->no_uld_attach = 1;
868
Linus Torvalds1da177e2005-04-16 15:20:36 -0700869 /*
870 * Apparently some really broken devices (contrary to the SCSI
871 * standards) need to be selected without asserting ATN
872 */
873 if (*bflags & BLIST_SELECT_NO_ATN)
874 sdev->select_no_atn = 1;
875
876 /*
James Bottomley4d7db042006-03-31 20:07:45 -0600877 * Maximum 512 sector transfer length
878 * broken RA4x00 Compaq Disk Array
879 */
880 if (*bflags & BLIST_MAX_512)
881 blk_queue_max_sectors(sdev->request_queue, 512);
882
883 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700884 * Some devices may not want to have a start command automatically
885 * issued when a device is added.
886 */
887 if (*bflags & BLIST_NOSTARTONADD)
888 sdev->no_start_on_add = 1;
889
890 if (*bflags & BLIST_SINGLELUN)
Tony Battersby25d7c362007-11-12 10:00:44 -0500891 scsi_target(sdev)->single_lun = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700892
Linus Torvalds1da177e2005-04-16 15:20:36 -0700893 sdev->use_10_for_rw = 1;
894
895 if (*bflags & BLIST_MS_SKIP_PAGE_08)
896 sdev->skip_ms_page_8 = 1;
897
898 if (*bflags & BLIST_MS_SKIP_PAGE_3F)
899 sdev->skip_ms_page_3f = 1;
900
901 if (*bflags & BLIST_USE_10_BYTE_MS)
902 sdev->use_10_for_ms = 1;
903
904 /* set the device running here so that slave configure
905 * may do I/O */
James Bottomley6f4267e2008-08-22 16:53:31 -0500906 ret = scsi_device_set_state(sdev, SDEV_RUNNING);
907 if (ret) {
908 ret = scsi_device_set_state(sdev, SDEV_BLOCK);
909
910 if (ret) {
911 sdev_printk(KERN_ERR, sdev,
912 "in wrong state %s to complete scan\n",
913 scsi_device_state_name(sdev->sdev_state));
914 return SCSI_SCAN_NO_RESPONSE;
915 }
916 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700917
918 if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
919 sdev->use_192_bytes_for_3f = 1;
920
921 if (*bflags & BLIST_NOT_LOCKABLE)
922 sdev->lockable = 0;
923
924 if (*bflags & BLIST_RETRY_HWERROR)
925 sdev->retry_hwerror = 1;
926
927 transport_configure_device(&sdev->sdev_gendev);
928
Christoph Hellwig93805092006-02-17 12:11:29 +0100929 if (sdev->host->hostt->slave_configure) {
James Bottomley6f4267e2008-08-22 16:53:31 -0500930 ret = sdev->host->hostt->slave_configure(sdev);
Christoph Hellwig93805092006-02-17 12:11:29 +0100931 if (ret) {
932 /*
933 * if LLDD reports slave not present, don't clutter
934 * console with alloc failure messages
935 */
936 if (ret != -ENXIO) {
937 sdev_printk(KERN_ERR, sdev,
938 "failed to configure device\n");
939 }
940 return SCSI_SCAN_NO_RESPONSE;
941 }
942 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700943
944 /*
945 * Ok, the device is now all set up, we can
946 * register it and tell the rest of the kernel
947 * about it.
948 */
Matthew Wilcox3e082a92006-09-28 15:19:20 -0600949 if (!async && scsi_sysfs_add_sdev(sdev) != 0)
Alan Sternb24b1032005-07-27 11:43:46 -0700950 return SCSI_SCAN_NO_RESPONSE;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700951
952 return SCSI_SCAN_LUN_PRESENT;
953}
954
James Bottomley6f3a2022005-09-22 20:33:28 -0500955static inline void scsi_destroy_sdev(struct scsi_device *sdev)
956{
Brian King309bd272006-06-27 11:10:43 -0500957 scsi_device_set_state(sdev, SDEV_DEL);
James Bottomley6f3a2022005-09-22 20:33:28 -0500958 if (sdev->host->hostt->slave_destroy)
959 sdev->host->hostt->slave_destroy(sdev);
960 transport_destroy_device(&sdev->sdev_gendev);
James Bottomley37e6ba02009-10-02 13:30:08 -0500961 put_device(&sdev->sdev_dev);
James Bottomley6f3a2022005-09-22 20:33:28 -0500962 put_device(&sdev->sdev_gendev);
963}
964
akpm@osdl.orgc5f2e642006-04-15 00:30:24 -0700965#ifdef CONFIG_SCSI_LOGGING
Kurt Garloff6c7154c2006-04-03 15:18:35 +0200966/**
Rob Landleyeb448202007-11-03 13:30:39 -0500967 * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
Kurt Garloff6c7154c2006-04-03 15:18:35 +0200968 * @buf: Output buffer with at least end-first+1 bytes of space
969 * @inq: Inquiry buffer (input)
970 * @first: Offset of string into inq
971 * @end: Index after last character in inq
972 */
akpm@osdl.orgc5f2e642006-04-15 00:30:24 -0700973static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq,
Kurt Garloff6c7154c2006-04-03 15:18:35 +0200974 unsigned first, unsigned end)
975{
976 unsigned term = 0, idx;
akpm@osdl.orgc5f2e642006-04-15 00:30:24 -0700977
978 for (idx = 0; idx + first < end && idx + first < inq[4] + 5; idx++) {
979 if (inq[idx+first] > ' ') {
Kurt Garloff6c7154c2006-04-03 15:18:35 +0200980 buf[idx] = inq[idx+first];
981 term = idx+1;
982 } else {
983 buf[idx] = ' ';
984 }
985 }
986 buf[term] = 0;
987 return buf;
988}
akpm@osdl.orgc5f2e642006-04-15 00:30:24 -0700989#endif
James Bottomley6f3a2022005-09-22 20:33:28 -0500990
Linus Torvalds1da177e2005-04-16 15:20:36 -0700991/**
992 * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
993 * @starget: pointer to target device structure
994 * @lun: LUN of target device
Linus Torvalds1da177e2005-04-16 15:20:36 -0700995 * @bflagsp: store bflags here if not NULL
Rob Landleyeb448202007-11-03 13:30:39 -0500996 * @sdevp: probe the LUN corresponding to this scsi_device
997 * @rescan: if nonzero skip some code only needed on first scan
998 * @hostdata: passed to scsi_alloc_sdev()
Linus Torvalds1da177e2005-04-16 15:20:36 -0700999 *
1000 * Description:
1001 * Call scsi_probe_lun, if a LUN with an attached device is found,
1002 * allocate and set it up by calling scsi_add_lun.
1003 *
1004 * Return:
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001005 * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
Linus Torvalds1da177e2005-04-16 15:20:36 -07001006 * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
1007 * attached at the LUN
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001008 * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
Linus Torvalds1da177e2005-04-16 15:20:36 -07001009 **/
1010static int scsi_probe_and_add_lun(struct scsi_target *starget,
1011 uint lun, int *bflagsp,
1012 struct scsi_device **sdevp, int rescan,
1013 void *hostdata)
1014{
1015 struct scsi_device *sdev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001016 unsigned char *result;
James Bottomley39216032005-06-15 18:48:29 -05001017 int bflags, res = SCSI_SCAN_NO_RESPONSE, result_len = 256;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001018 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1019
1020 /*
1021 * The rescan flag is used as an optimization, the first scan of a
1022 * host adapter calls into here with rescan == 0.
1023 */
James Bottomley6f3a2022005-09-22 20:33:28 -05001024 sdev = scsi_device_lookup_by_target(starget, lun);
1025 if (sdev) {
James Bottomley0f1d87a2008-08-22 16:43:59 -05001026 if (rescan || !scsi_device_created(sdev)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001027 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
1028 "scsi scan: device exists on %s\n",
Kay Sievers71610f52008-12-03 22:41:36 +01001029 dev_name(&sdev->sdev_gendev)));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001030 if (sdevp)
1031 *sdevp = sdev;
1032 else
1033 scsi_device_put(sdev);
1034
1035 if (bflagsp)
1036 *bflagsp = scsi_get_device_flags(sdev,
1037 sdev->vendor,
1038 sdev->model);
1039 return SCSI_SCAN_LUN_PRESENT;
1040 }
James Bottomley6f3a2022005-09-22 20:33:28 -05001041 scsi_device_put(sdev);
1042 } else
1043 sdev = scsi_alloc_sdev(starget, lun, hostdata);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001044 if (!sdev)
1045 goto out;
James Bottomley39216032005-06-15 18:48:29 -05001046
1047 result = kmalloc(result_len, GFP_ATOMIC |
Al Virobc861202005-04-24 12:28:34 -07001048 ((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 if (!result)
James Bottomley39216032005-06-15 18:48:29 -05001050 goto out_free_sdev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051
James Bottomley39216032005-06-15 18:48:29 -05001052 if (scsi_probe_lun(sdev, result, result_len, &bflags))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001053 goto out_free_result;
1054
Kurt Garloff4186ab12006-04-03 15:16:48 +02001055 if (bflagsp)
1056 *bflagsp = bflags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001057 /*
1058 * result contains valid SCSI INQUIRY data.
1059 */
Kurt Garloff13f7e5a2006-04-03 15:20:08 +02001060 if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001061 /*
1062 * For a Peripheral qualifier 3 (011b), the SCSI
1063 * spec says: The device server is not capable of
1064 * supporting a physical device on this logical
1065 * unit.
1066 *
1067 * For disks, this implies that there is no
1068 * logical disk configured at sdev->lun, but there
1069 * is a target id responding.
1070 */
Kurt Garloff6c7154c2006-04-03 15:18:35 +02001071 SCSI_LOG_SCAN_BUS(2, sdev_printk(KERN_INFO, sdev, "scsi scan:"
1072 " peripheral qualifier of 3, device not"
1073 " added\n"))
1074 if (lun == 0) {
akpm@osdl.orgc5f2e642006-04-15 00:30:24 -07001075 SCSI_LOG_SCAN_BUS(1, {
1076 unsigned char vend[9];
1077 unsigned char mod[17];
1078
1079 sdev_printk(KERN_INFO, sdev,
Kurt Garloff6c7154c2006-04-03 15:18:35 +02001080 "scsi scan: consider passing scsi_mod."
Kurt Garloff3424a652007-01-09 02:28:54 +01001081 "dev_flags=%s:%s:0x240 or 0x1000240\n",
Kurt Garloff6c7154c2006-04-03 15:18:35 +02001082 scsi_inq_str(vend, result, 8, 16),
akpm@osdl.orgc5f2e642006-04-15 00:30:24 -07001083 scsi_inq_str(mod, result, 16, 32));
1084 });
James Bottomley643eb2d2008-03-22 22:42:27 -05001085
Kurt Garloff6c7154c2006-04-03 15:18:35 +02001086 }
James Bottomley643eb2d2008-03-22 22:42:27 -05001087
Linus Torvalds1da177e2005-04-16 15:20:36 -07001088 res = SCSI_SCAN_TARGET_PRESENT;
1089 goto out_free_result;
1090 }
1091
Alan Stern1bfc5d92006-02-09 15:26:18 -05001092 /*
dave wysochanski84961f22006-08-09 14:56:32 -04001093 * Some targets may set slight variations of PQ and PDT to signal
1094 * that no LUN is present, so don't add sdev in these cases.
1095 * Two specific examples are:
1096 * 1) NetApp targets: return PQ=1, PDT=0x1f
1097 * 2) USB UFI: returns PDT=0x1f, with the PQ bits being "reserved"
1098 * in the UFI 1.0 spec (we cannot rely on reserved bits).
1099 *
1100 * References:
1101 * 1) SCSI SPC-3, pp. 145-146
1102 * PQ=1: "A peripheral device having the specified peripheral
1103 * device type is not connected to this logical unit. However, the
1104 * device server is capable of supporting the specified peripheral
1105 * device type on this logical unit."
1106 * PDT=0x1f: "Unknown or no device type"
1107 * 2) USB UFI 1.0, p. 20
1108 * PDT=00h Direct-access device (floppy)
1109 * PDT=1Fh none (no FDD connected to the requested logical unit)
Alan Stern1bfc5d92006-02-09 15:26:18 -05001110 */
dave wysochanski84961f22006-08-09 14:56:32 -04001111 if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
James Bottomley01b291b2008-08-21 15:14:14 -05001112 (result[0] & 0x1f) == 0x1f &&
1113 !scsi_is_wlun(lun)) {
Alan Stern1bfc5d92006-02-09 15:26:18 -05001114 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
1115 "scsi scan: peripheral device type"
1116 " of 31, no device added\n"));
1117 res = SCSI_SCAN_TARGET_PRESENT;
1118 goto out_free_result;
1119 }
1120
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001121 res = scsi_add_lun(sdev, result, &bflags, shost->async_scan);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122 if (res == SCSI_SCAN_LUN_PRESENT) {
1123 if (bflags & BLIST_KEY) {
1124 sdev->lockable = 0;
James Bottomley39216032005-06-15 18:48:29 -05001125 scsi_unlock_floptical(sdev, result);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127 }
1128
1129 out_free_result:
1130 kfree(result);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 out_free_sdev:
1132 if (res == SCSI_SCAN_LUN_PRESENT) {
1133 if (sdevp) {
Alan Sternb70d37b2005-07-26 10:30:40 -04001134 if (scsi_device_get(sdev) == 0) {
1135 *sdevp = sdev;
1136 } else {
1137 __scsi_remove_device(sdev);
1138 res = SCSI_SCAN_NO_RESPONSE;
1139 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001140 }
James Bottomley6f3a2022005-09-22 20:33:28 -05001141 } else
1142 scsi_destroy_sdev(sdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143 out:
1144 return res;
1145}
1146
1147/**
1148 * scsi_sequential_lun_scan - sequentially scan a SCSI target
1149 * @starget: pointer to target structure to scan
1150 * @bflags: black/white list flag for LUN 0
Rob Landleyeb448202007-11-03 13:30:39 -05001151 * @scsi_level: Which version of the standard does this device adhere to
1152 * @rescan: passed to scsi_probe_add_lun()
Linus Torvalds1da177e2005-04-16 15:20:36 -07001153 *
1154 * Description:
1155 * Generally, scan from LUN 1 (LUN 0 is assumed to already have been
1156 * scanned) to some maximum lun until a LUN is found with no device
1157 * attached. Use the bflags to figure out any oddities.
1158 *
1159 * Modifies sdevscan->lun.
1160 **/
1161static void scsi_sequential_lun_scan(struct scsi_target *starget,
Kurt Garloff4186ab12006-04-03 15:16:48 +02001162 int bflags, int scsi_level, int rescan)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001163{
1164 unsigned int sparse_lun, lun, max_dev_lun;
1165 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1166
1167 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of"
Kay Sievers71610f52008-12-03 22:41:36 +01001168 "%s\n", dev_name(&starget->dev)));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001169
1170 max_dev_lun = min(max_scsi_luns, shost->max_lun);
1171 /*
1172 * If this device is known to support sparse multiple units,
1173 * override the other settings, and scan all of them. Normally,
1174 * SCSI-3 devices should be scanned via the REPORT LUNS.
1175 */
1176 if (bflags & BLIST_SPARSELUN) {
1177 max_dev_lun = shost->max_lun;
1178 sparse_lun = 1;
1179 } else
1180 sparse_lun = 0;
1181
1182 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001183 * If less than SCSI_1_CSS, and no special lun scaning, stop
1184 * scanning; this matches 2.4 behaviour, but could just be a bug
1185 * (to continue scanning a SCSI_1_CSS device).
1186 *
1187 * This test is broken. We might not have any device on lun0 for
1188 * a sparselun device, and if that's the case then how would we
1189 * know the real scsi_level, eh? It might make sense to just not
1190 * scan any SCSI_1 device for non-0 luns, but that check would best
1191 * go into scsi_alloc_sdev() and just have it return null when asked
1192 * to alloc an sdev for lun > 0 on an already found SCSI_1 device.
1193 *
1194 if ((sdevscan->scsi_level < SCSI_1_CCS) &&
1195 ((bflags & (BLIST_FORCELUN | BLIST_SPARSELUN | BLIST_MAX5LUN))
1196 == 0))
1197 return;
1198 */
1199 /*
1200 * If this device is known to support multiple units, override
1201 * the other settings, and scan all of them.
1202 */
1203 if (bflags & BLIST_FORCELUN)
1204 max_dev_lun = shost->max_lun;
1205 /*
1206 * REGAL CDC-4X: avoid hang after LUN 4
1207 */
1208 if (bflags & BLIST_MAX5LUN)
1209 max_dev_lun = min(5U, max_dev_lun);
1210 /*
1211 * Do not scan SCSI-2 or lower device past LUN 7, unless
1212 * BLIST_LARGELUN.
1213 */
1214 if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN))
1215 max_dev_lun = min(8U, max_dev_lun);
1216
1217 /*
1218 * We have already scanned LUN 0, so start at LUN 1. Keep scanning
1219 * until we reach the max, or no LUN is found and we are not
1220 * sparse_lun.
1221 */
1222 for (lun = 1; lun < max_dev_lun; ++lun)
1223 if ((scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan,
1224 NULL) != SCSI_SCAN_LUN_PRESENT) &&
1225 !sparse_lun)
1226 return;
1227}
1228
1229/**
1230 * scsilun_to_int: convert a scsi_lun to an int
1231 * @scsilun: struct scsi_lun to be converted.
1232 *
1233 * Description:
1234 * Convert @scsilun from a struct scsi_lun to a four byte host byte-ordered
1235 * integer, and return the result. The caller must check for
1236 * truncation before using this function.
1237 *
1238 * Notes:
1239 * The struct scsi_lun is assumed to be four levels, with each level
1240 * effectively containing a SCSI byte-ordered (big endian) short; the
1241 * addressing bits of each level are ignored (the highest two bits).
1242 * For a description of the LUN format, post SCSI-3 see the SCSI
1243 * Architecture Model, for SCSI-3 see the SCSI Controller Commands.
1244 *
1245 * Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns
1246 * the integer: 0x0b030a04
1247 **/
Christof Schmitt462b7852007-06-19 10:25:30 +02001248int scsilun_to_int(struct scsi_lun *scsilun)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001249{
1250 int i;
1251 unsigned int lun;
1252
1253 lun = 0;
1254 for (i = 0; i < sizeof(lun); i += 2)
1255 lun = lun | (((scsilun->scsi_lun[i] << 8) |
1256 scsilun->scsi_lun[i + 1]) << (i * 8));
1257 return lun;
1258}
Christof Schmitt462b7852007-06-19 10:25:30 +02001259EXPORT_SYMBOL(scsilun_to_int);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001260
1261/**
James.Smart@Emulex.Com2f4701d2005-07-13 22:05:03 -04001262 * int_to_scsilun: reverts an int into a scsi_lun
Rob Landleyeb448202007-11-03 13:30:39 -05001263 * @lun: integer to be reverted
James.Smart@Emulex.Com2f4701d2005-07-13 22:05:03 -04001264 * @scsilun: struct scsi_lun to be set.
1265 *
1266 * Description:
1267 * Reverts the functionality of the scsilun_to_int, which packed
1268 * an 8-byte lun value into an int. This routine unpacks the int
1269 * back into the lun value.
1270 * Note: the scsilun_to_int() routine does not truly handle all
1271 * 8bytes of the lun value. This functions restores only as much
1272 * as was set by the routine.
1273 *
1274 * Notes:
1275 * Given an integer : 0x0b030a04, this function returns a
1276 * scsi_lun of : struct scsi_lun of: 0a 04 0b 03 00 00 00 00
1277 *
1278 **/
1279void int_to_scsilun(unsigned int lun, struct scsi_lun *scsilun)
1280{
1281 int i;
1282
1283 memset(scsilun->scsi_lun, 0, sizeof(scsilun->scsi_lun));
1284
1285 for (i = 0; i < sizeof(lun); i += 2) {
1286 scsilun->scsi_lun[i] = (lun >> 8) & 0xFF;
1287 scsilun->scsi_lun[i+1] = lun & 0xFF;
1288 lun = lun >> 16;
1289 }
1290}
1291EXPORT_SYMBOL(int_to_scsilun);
1292
1293/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07001294 * scsi_report_lun_scan - Scan using SCSI REPORT LUN results
Rob Landleyeb448202007-11-03 13:30:39 -05001295 * @starget: which target
1296 * @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN
1297 * @rescan: nonzero if we can skip code only needed on first scan
Linus Torvalds1da177e2005-04-16 15:20:36 -07001298 *
1299 * Description:
Rob Landleyeb448202007-11-03 13:30:39 -05001300 * Fast scanning for modern (SCSI-3) devices by sending a REPORT LUN command.
1301 * Scan the resulting list of LUNs by calling scsi_probe_and_add_lun.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001302 *
Rob Landleyeb448202007-11-03 13:30:39 -05001303 * If BLINK_REPORTLUN2 is set, scan a target that supports more than 8
1304 * LUNs even if it's older than SCSI-3.
1305 * If BLIST_NOREPORTLUN is set, return 1 always.
1306 * If BLIST_NOLUN is set, return 0 always.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001307 *
1308 * Return:
1309 * 0: scan completed (or no memory, so further scanning is futile)
Rob Landleyeb448202007-11-03 13:30:39 -05001310 * 1: could not scan with REPORT LUN
Linus Torvalds1da177e2005-04-16 15:20:36 -07001311 **/
James Bottomley6f3a2022005-09-22 20:33:28 -05001312static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313 int rescan)
1314{
1315 char devname[64];
1316 unsigned char scsi_cmd[MAX_COMMAND_SIZE];
1317 unsigned int length;
1318 unsigned int lun;
1319 unsigned int num_luns;
1320 unsigned int retries;
James Bottomley39216032005-06-15 18:48:29 -05001321 int result;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001322 struct scsi_lun *lunp, *lun_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001323 u8 *data;
1324 struct scsi_sense_hdr sshdr;
James Bottomley6f3a2022005-09-22 20:33:28 -05001325 struct scsi_device *sdev;
1326 struct Scsi_Host *shost = dev_to_shost(&starget->dev);
Alan Stern2ef89192005-11-08 15:51:55 -05001327 int ret = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328
1329 /*
1330 * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
1331 * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
1332 * support more than 8 LUNs.
1333 */
James Bottomley4d7db042006-03-31 20:07:45 -06001334 if (bflags & BLIST_NOREPORTLUN)
1335 return 1;
1336 if (starget->scsi_level < SCSI_2 &&
1337 starget->scsi_level != SCSI_UNKNOWN)
1338 return 1;
1339 if (starget->scsi_level < SCSI_3 &&
1340 (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001341 return 1;
1342 if (bflags & BLIST_NOLUN)
1343 return 0;
1344
James Bottomley6f3a2022005-09-22 20:33:28 -05001345 if (!(sdev = scsi_device_lookup_by_target(starget, 0))) {
1346 sdev = scsi_alloc_sdev(starget, 0, NULL);
1347 if (!sdev)
1348 return 0;
1349 if (scsi_device_get(sdev))
1350 return 0;
1351 }
1352
Linus Torvalds1da177e2005-04-16 15:20:36 -07001353 sprintf(devname, "host %d channel %d id %d",
James Bottomley6f3a2022005-09-22 20:33:28 -05001354 shost->host_no, sdev->channel, sdev->id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001355
1356 /*
1357 * Allocate enough to hold the header (the same size as one scsi_lun)
1358 * plus the max number of luns we are requesting.
1359 *
1360 * Reallocating and trying again (with the exact amount we need)
1361 * would be nice, but then we need to somehow limit the size
1362 * allocated based on the available memory and the limits of
1363 * kmalloc - we don't want a kmalloc() failure of a huge value to
1364 * prevent us from finding any LUNs on this target.
1365 */
1366 length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun);
1367 lun_data = kmalloc(length, GFP_ATOMIC |
1368 (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
James Bottomley6f3a2022005-09-22 20:33:28 -05001369 if (!lun_data) {
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001370 printk(ALLOC_FAILURE_MSG, __func__);
James Bottomley39216032005-06-15 18:48:29 -05001371 goto out;
James Bottomley6f3a2022005-09-22 20:33:28 -05001372 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001373
1374 scsi_cmd[0] = REPORT_LUNS;
1375
1376 /*
1377 * bytes 1 - 5: reserved, set to zero.
1378 */
1379 memset(&scsi_cmd[1], 0, 5);
1380
1381 /*
1382 * bytes 6 - 9: length of the command.
1383 */
1384 scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff;
1385 scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff;
1386 scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff;
1387 scsi_cmd[9] = (unsigned char) length & 0xff;
1388
1389 scsi_cmd[10] = 0; /* reserved */
1390 scsi_cmd[11] = 0; /* control */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391
1392 /*
1393 * We can get a UNIT ATTENTION, for example a power on/reset, so
1394 * retry a few times (like sd.c does for TEST UNIT READY).
1395 * Experience shows some combinations of adapter/devices get at
1396 * least two power on/resets.
1397 *
1398 * Illegal requests (for devices that do not support REPORT LUNS)
1399 * should come through as a check condition, and will not generate
1400 * a retry.
1401 */
1402 for (retries = 0; retries < 3; retries++) {
1403 SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending"
1404 " REPORT LUNS to %s (try %d)\n", devname,
1405 retries));
James Bottomley39216032005-06-15 18:48:29 -05001406
James Bottomley39216032005-06-15 18:48:29 -05001407 result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
James Bottomleyea73a9f2005-08-28 11:33:52 -05001408 lun_data, length, &sshdr,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09001409 SCSI_TIMEOUT + 4 * HZ, 3, NULL);
James Bottomley39216032005-06-15 18:48:29 -05001410
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411 SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
James Bottomley39216032005-06-15 18:48:29 -05001412 " %s (try %d) result 0x%x\n", result
1413 ? "failed" : "successful", retries, result));
1414 if (result == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001415 break;
James Bottomleyea73a9f2005-08-28 11:33:52 -05001416 else if (scsi_sense_valid(&sshdr)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001417 if (sshdr.sense_key != UNIT_ATTENTION)
1418 break;
1419 }
1420 }
1421
James Bottomley39216032005-06-15 18:48:29 -05001422 if (result) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001423 /*
1424 * The device probably does not support a REPORT LUN command
1425 */
Alan Stern2ef89192005-11-08 15:51:55 -05001426 ret = 1;
1427 goto out_err;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001429
1430 /*
1431 * Get the length from the first four bytes of lun_data.
1432 */
1433 data = (u8 *) lun_data->scsi_lun;
1434 length = ((data[0] << 24) | (data[1] << 16) |
1435 (data[2] << 8) | (data[3] << 0));
1436
1437 num_luns = (length / sizeof(struct scsi_lun));
1438 if (num_luns > max_scsi_report_luns) {
1439 printk(KERN_WARNING "scsi: On %s only %d (max_scsi_report_luns)"
1440 " of %d luns reported, try increasing"
1441 " max_scsi_report_luns.\n", devname,
1442 max_scsi_report_luns, num_luns);
1443 num_luns = max_scsi_report_luns;
1444 }
1445
Jeff Garzik3bf743e2005-10-24 18:04:06 -04001446 SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
1447 "scsi scan: REPORT LUN scan\n"));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001448
1449 /*
1450 * Scan the luns in lun_data. The entry at offset 0 is really
1451 * the header, so start at 1 and go up to and including num_luns.
1452 */
1453 for (lunp = &lun_data[1]; lunp <= &lun_data[num_luns]; lunp++) {
1454 lun = scsilun_to_int(lunp);
1455
1456 /*
1457 * Check if the unused part of lunp is non-zero, and so
1458 * does not fit in lun.
1459 */
1460 if (memcmp(&lunp->scsi_lun[sizeof(lun)], "\0\0\0\0", 4)) {
1461 int i;
1462
1463 /*
1464 * Output an error displaying the LUN in byte order,
1465 * this differs from what linux would print for the
1466 * integer LUN value.
1467 */
1468 printk(KERN_WARNING "scsi: %s lun 0x", devname);
1469 data = (char *)lunp->scsi_lun;
1470 for (i = 0; i < sizeof(struct scsi_lun); i++)
1471 printk("%02x", data[i]);
1472 printk(" has a LUN larger than currently supported.\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001473 } else if (lun > sdev->host->max_lun) {
1474 printk(KERN_WARNING "scsi: %s lun%d has a LUN larger"
1475 " than allowed by the host adapter\n",
1476 devname, lun);
1477 } else {
1478 int res;
1479
1480 res = scsi_probe_and_add_lun(starget,
1481 lun, NULL, NULL, rescan, NULL);
1482 if (res == SCSI_SCAN_NO_RESPONSE) {
1483 /*
1484 * Got some results, but now none, abort.
1485 */
Jeff Garzik3bf743e2005-10-24 18:04:06 -04001486 sdev_printk(KERN_ERR, sdev,
1487 "Unexpected response"
1488 " from lun %d while scanning, scan"
1489 " aborted\n", lun);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001490 break;
1491 }
1492 }
1493 }
1494
Alan Stern2ef89192005-11-08 15:51:55 -05001495 out_err:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001496 kfree(lun_data);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001497 out:
James Bottomley6f3a2022005-09-22 20:33:28 -05001498 scsi_device_put(sdev);
James Bottomley0f1d87a2008-08-22 16:43:59 -05001499 if (scsi_device_created(sdev))
James Bottomley6f3a2022005-09-22 20:33:28 -05001500 /*
1501 * the sdev we used didn't appear in the report luns scan
1502 */
1503 scsi_destroy_sdev(sdev);
Alan Stern2ef89192005-11-08 15:51:55 -05001504 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001505}
1506
1507struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
1508 uint id, uint lun, void *hostdata)
1509{
Matthew Wilcoxa97a83a2006-02-05 08:01:33 -07001510 struct scsi_device *sdev = ERR_PTR(-ENODEV);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001511 struct device *parent = &shost->shost_gendev;
Christoph Hellwige02f3f52006-01-13 19:04:00 +01001512 struct scsi_target *starget;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001513
Matthew Wilcox938e2ac2007-01-15 18:07:09 -07001514 if (strncmp(scsi_scan_type, "none", 4) == 0)
1515 return ERR_PTR(-ENODEV);
1516
Christoph Hellwige02f3f52006-01-13 19:04:00 +01001517 starget = scsi_alloc_target(parent, channel, id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001518 if (!starget)
1519 return ERR_PTR(-ENOMEM);
1520
Arjan van de Ven0b950672006-01-11 13:16:10 +01001521 mutex_lock(&shost->scan_mutex);
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001522 if (!shost->async_scan)
1523 scsi_complete_async_scans();
1524
Matthew Wilcoxa97a83a2006-02-05 08:01:33 -07001525 if (scsi_host_scan_allowed(shost))
1526 scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
Arjan van de Ven0b950672006-01-11 13:16:10 +01001527 mutex_unlock(&shost->scan_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001528 scsi_target_reap(starget);
1529 put_device(&starget->dev);
1530
1531 return sdev;
1532}
1533EXPORT_SYMBOL(__scsi_add_device);
1534
James Bottomley146f7262005-09-10 12:44:09 -05001535int scsi_add_device(struct Scsi_Host *host, uint channel,
1536 uint target, uint lun)
1537{
1538 struct scsi_device *sdev =
1539 __scsi_add_device(host, channel, target, lun, NULL);
1540 if (IS_ERR(sdev))
1541 return PTR_ERR(sdev);
1542
1543 scsi_device_put(sdev);
1544 return 0;
1545}
1546EXPORT_SYMBOL(scsi_add_device);
1547
Linus Torvalds1da177e2005-04-16 15:20:36 -07001548void scsi_rescan_device(struct device *dev)
1549{
1550 struct scsi_driver *drv;
1551
1552 if (!dev->driver)
1553 return;
1554
1555 drv = to_scsi_driver(dev->driver);
1556 if (try_module_get(drv->owner)) {
1557 if (drv->rescan)
1558 drv->rescan(dev);
1559 module_put(drv->owner);
1560 }
1561}
1562EXPORT_SYMBOL(scsi_rescan_device);
1563
Alan Sterne517d312005-07-26 10:18:45 -04001564static void __scsi_scan_target(struct device *parent, unsigned int channel,
1565 unsigned int id, unsigned int lun, int rescan)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001566{
1567 struct Scsi_Host *shost = dev_to_shost(parent);
1568 int bflags = 0;
1569 int res;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001570 struct scsi_target *starget;
1571
1572 if (shost->this_id == id)
1573 /*
1574 * Don't scan the host adapter
1575 */
1576 return;
1577
Linus Torvalds1da177e2005-04-16 15:20:36 -07001578 starget = scsi_alloc_target(parent, channel, id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001579 if (!starget)
1580 return;
1581
Linus Torvalds1da177e2005-04-16 15:20:36 -07001582 if (lun != SCAN_WILD_CARD) {
1583 /*
1584 * Scan for a specific host/chan/id/lun.
1585 */
1586 scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan, NULL);
1587 goto out_reap;
1588 }
1589
1590 /*
1591 * Scan LUN 0, if there is some response, scan further. Ideally, we
1592 * would not configure LUN 0 until all LUNs are scanned.
1593 */
James Bottomley6f3a2022005-09-22 20:33:28 -05001594 res = scsi_probe_and_add_lun(starget, 0, &bflags, NULL, rescan, NULL);
1595 if (res == SCSI_SCAN_LUN_PRESENT || res == SCSI_SCAN_TARGET_PRESENT) {
1596 if (scsi_report_lun_scan(starget, bflags, rescan) != 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001597 /*
1598 * The REPORT LUN did not scan the target,
1599 * do a sequential scan.
1600 */
1601 scsi_sequential_lun_scan(starget, bflags,
Kurt Garloff4186ab12006-04-03 15:16:48 +02001602 starget->scsi_level, rescan);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001603 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001604
1605 out_reap:
1606 /* now determine if the target has any children at all
1607 * and if not, nuke it */
1608 scsi_target_reap(starget);
1609
1610 put_device(&starget->dev);
1611}
Alan Sterne517d312005-07-26 10:18:45 -04001612
1613/**
Randy Dunlape59e4a02008-02-29 22:02:50 -08001614 * scsi_scan_target - scan a target id, possibly including all LUNs on the target.
Alan Sterne517d312005-07-26 10:18:45 -04001615 * @parent: host to scan
1616 * @channel: channel to scan
1617 * @id: target id to scan
1618 * @lun: Specific LUN to scan or SCAN_WILD_CARD
1619 * @rescan: passed to LUN scanning routines
1620 *
1621 * Description:
1622 * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0,
1623 * and possibly all LUNs on the target id.
1624 *
1625 * First try a REPORT LUN scan, if that does not scan the target, do a
1626 * sequential scan of LUNs on the target id.
1627 **/
1628void scsi_scan_target(struct device *parent, unsigned int channel,
1629 unsigned int id, unsigned int lun, int rescan)
1630{
1631 struct Scsi_Host *shost = dev_to_shost(parent);
1632
Matthew Wilcox93b45af2006-11-22 13:24:53 -07001633 if (strncmp(scsi_scan_type, "none", 4) == 0)
1634 return;
1635
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001636 mutex_lock(&shost->scan_mutex);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001637 if (!shost->async_scan)
1638 scsi_complete_async_scans();
1639
Alan Sterne517d312005-07-26 10:18:45 -04001640 if (scsi_host_scan_allowed(shost))
1641 __scsi_scan_target(parent, channel, id, lun, rescan);
Arjan van de Ven0b950672006-01-11 13:16:10 +01001642 mutex_unlock(&shost->scan_mutex);
Alan Sterne517d312005-07-26 10:18:45 -04001643}
Linus Torvalds1da177e2005-04-16 15:20:36 -07001644EXPORT_SYMBOL(scsi_scan_target);
1645
1646static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
1647 unsigned int id, unsigned int lun, int rescan)
1648{
1649 uint order_id;
1650
1651 if (id == SCAN_WILD_CARD)
1652 for (id = 0; id < shost->max_id; ++id) {
1653 /*
1654 * XXX adapter drivers when possible (FCP, iSCSI)
1655 * could modify max_id to match the current max,
1656 * not the absolute max.
1657 *
1658 * XXX add a shost id iterator, so for example,
1659 * the FC ID can be the same as a target id
1660 * without a huge overhead of sparse id's.
1661 */
1662 if (shost->reverse_ordering)
1663 /*
1664 * Scan from high to low id.
1665 */
1666 order_id = shost->max_id - id - 1;
1667 else
1668 order_id = id;
Alan Sterne517d312005-07-26 10:18:45 -04001669 __scsi_scan_target(&shost->shost_gendev, channel,
1670 order_id, lun, rescan);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001671 }
1672 else
Alan Sterne517d312005-07-26 10:18:45 -04001673 __scsi_scan_target(&shost->shost_gendev, channel,
1674 id, lun, rescan);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001675}
1676
1677int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
1678 unsigned int id, unsigned int lun, int rescan)
1679{
Jeff Garzik3bf743e2005-10-24 18:04:06 -04001680 SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost,
1681 "%s: <%u:%u:%u>\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001682 __func__, channel, id, lun));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001683
1684 if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
Amit Arora091686d2006-05-19 16:14:50 -07001685 ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
Linus Torvalds1da177e2005-04-16 15:20:36 -07001686 ((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
1687 return -EINVAL;
1688
Arjan van de Ven0b950672006-01-11 13:16:10 +01001689 mutex_lock(&shost->scan_mutex);
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001690 if (!shost->async_scan)
1691 scsi_complete_async_scans();
1692
Mike Anderson82f29462005-06-16 11:14:33 -07001693 if (scsi_host_scan_allowed(shost)) {
1694 if (channel == SCAN_WILD_CARD)
1695 for (channel = 0; channel <= shost->max_channel;
1696 channel++)
1697 scsi_scan_channel(shost, channel, id, lun,
1698 rescan);
1699 else
Linus Torvalds1da177e2005-04-16 15:20:36 -07001700 scsi_scan_channel(shost, channel, id, lun, rescan);
Mike Anderson82f29462005-06-16 11:14:33 -07001701 }
Arjan van de Ven0b950672006-01-11 13:16:10 +01001702 mutex_unlock(&shost->scan_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001703
1704 return 0;
1705}
1706
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001707static void scsi_sysfs_add_devices(struct Scsi_Host *shost)
1708{
1709 struct scsi_device *sdev;
1710 shost_for_each_device(sdev, shost) {
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001711 if (!scsi_host_scan_allowed(shost) ||
1712 scsi_sysfs_add_sdev(sdev) != 0)
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001713 scsi_destroy_sdev(sdev);
1714 }
1715}
1716
1717/**
1718 * scsi_prep_async_scan - prepare for an async scan
1719 * @shost: the host which will be scanned
1720 * Returns: a cookie to be passed to scsi_finish_async_scan()
1721 *
1722 * Tells the midlayer this host is going to do an asynchronous scan.
1723 * It reserves the host's position in the scanning list and ensures
1724 * that other asynchronous scans started after this one won't affect the
1725 * ordering of the discovered devices.
1726 */
Matthew Wilcox1aa8fab2006-11-22 13:24:54 -07001727static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001728{
1729 struct async_scan_data *data;
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001730 unsigned long flags;
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001731
1732 if (strncmp(scsi_scan_type, "sync", 4) == 0)
1733 return NULL;
1734
1735 if (shost->async_scan) {
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001736 printk("%s called twice for host %d", __func__,
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001737 shost->host_no);
1738 dump_stack();
1739 return NULL;
1740 }
1741
1742 data = kmalloc(sizeof(*data), GFP_KERNEL);
1743 if (!data)
1744 goto err;
1745 data->shost = scsi_host_get(shost);
1746 if (!data->shost)
1747 goto err;
1748 init_completion(&data->prev_finished);
1749
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001750 mutex_lock(&shost->scan_mutex);
1751 spin_lock_irqsave(shost->host_lock, flags);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001752 shost->async_scan = 1;
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001753 spin_unlock_irqrestore(shost->host_lock, flags);
1754 mutex_unlock(&shost->scan_mutex);
1755
1756 spin_lock(&async_scan_lock);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001757 if (list_empty(&scanning_hosts))
1758 complete(&data->prev_finished);
1759 list_add_tail(&data->list, &scanning_hosts);
1760 spin_unlock(&async_scan_lock);
1761
1762 return data;
1763
1764 err:
1765 kfree(data);
1766 return NULL;
1767}
1768
1769/**
1770 * scsi_finish_async_scan - asynchronous scan has finished
1771 * @data: cookie returned from earlier call to scsi_prep_async_scan()
1772 *
1773 * All the devices currently attached to this host have been found.
1774 * This function announces all the devices it has found to the rest
1775 * of the system.
1776 */
Matthew Wilcox1aa8fab2006-11-22 13:24:54 -07001777static void scsi_finish_async_scan(struct async_scan_data *data)
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001778{
1779 struct Scsi_Host *shost;
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001780 unsigned long flags;
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001781
1782 if (!data)
1783 return;
1784
1785 shost = data->shost;
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001786
1787 mutex_lock(&shost->scan_mutex);
1788
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001789 if (!shost->async_scan) {
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001790 printk("%s called twice for host %d", __func__,
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001791 shost->host_no);
1792 dump_stack();
Julia Lawall773e82f2008-07-21 09:58:30 +02001793 mutex_unlock(&shost->scan_mutex);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001794 return;
1795 }
1796
1797 wait_for_completion(&data->prev_finished);
1798
1799 scsi_sysfs_add_devices(shost);
1800
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001801 spin_lock_irqsave(shost->host_lock, flags);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001802 shost->async_scan = 0;
Matthew Wilcox6b7f1232007-06-26 15:18:51 -06001803 spin_unlock_irqrestore(shost->host_lock, flags);
1804
1805 mutex_unlock(&shost->scan_mutex);
1806
1807 spin_lock(&async_scan_lock);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001808 list_del(&data->list);
1809 if (!list_empty(&scanning_hosts)) {
1810 struct async_scan_data *next = list_entry(scanning_hosts.next,
1811 struct async_scan_data, list);
1812 complete(&next->prev_finished);
1813 }
1814 spin_unlock(&async_scan_lock);
1815
1816 scsi_host_put(shost);
1817 kfree(data);
1818}
1819
Matthew Wilcox1aa8fab2006-11-22 13:24:54 -07001820static void do_scsi_scan_host(struct Scsi_Host *shost)
1821{
1822 if (shost->hostt->scan_finished) {
1823 unsigned long start = jiffies;
1824 if (shost->hostt->scan_start)
1825 shost->hostt->scan_start(shost);
1826
1827 while (!shost->hostt->scan_finished(shost, jiffies - start))
1828 msleep(10);
1829 } else {
1830 scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
1831 SCAN_WILD_CARD, 0);
1832 }
1833}
1834
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001835static int do_scan_async(void *_data)
1836{
1837 struct async_scan_data *data = _data;
Matthew Wilcox1aa8fab2006-11-22 13:24:54 -07001838 do_scsi_scan_host(data->shost);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001839 scsi_finish_async_scan(data);
1840 return 0;
1841}
1842
Linus Torvalds1da177e2005-04-16 15:20:36 -07001843/**
1844 * scsi_scan_host - scan the given adapter
1845 * @shost: adapter to scan
1846 **/
1847void scsi_scan_host(struct Scsi_Host *shost)
1848{
Matthew Wilcoxa57b1fc2007-08-20 09:18:48 -06001849 struct task_struct *p;
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001850 struct async_scan_data *data;
1851
1852 if (strncmp(scsi_scan_type, "none", 4) == 0)
1853 return;
1854
1855 data = scsi_prep_async_scan(shost);
1856 if (!data) {
Matthew Wilcox1aa8fab2006-11-22 13:24:54 -07001857 do_scsi_scan_host(shost);
Matthew Wilcox3e082a92006-09-28 15:19:20 -06001858 return;
1859 }
Matthew Wilcox1aa8fab2006-11-22 13:24:54 -07001860
Matthew Wilcoxa57b1fc2007-08-20 09:18:48 -06001861 p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
Hirofumi Nakagawa801678c2008-04-29 01:03:09 -07001862 if (IS_ERR(p))
Matthew Wilcoxa57b1fc2007-08-20 09:18:48 -06001863 do_scan_async(data);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001864}
1865EXPORT_SYMBOL(scsi_scan_host);
1866
Linus Torvalds1da177e2005-04-16 15:20:36 -07001867void scsi_forget_host(struct Scsi_Host *shost)
1868{
Alan Sterna64358d2005-07-26 10:27:10 -04001869 struct scsi_device *sdev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001870 unsigned long flags;
1871
Alan Sterna64358d2005-07-26 10:27:10 -04001872 restart:
Linus Torvalds1da177e2005-04-16 15:20:36 -07001873 spin_lock_irqsave(shost->host_lock, flags);
Alan Sterna64358d2005-07-26 10:27:10 -04001874 list_for_each_entry(sdev, &shost->__devices, siblings) {
1875 if (sdev->sdev_state == SDEV_DEL)
1876 continue;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001877 spin_unlock_irqrestore(shost->host_lock, flags);
Alan Sterna64358d2005-07-26 10:27:10 -04001878 __scsi_remove_device(sdev);
1879 goto restart;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001880 }
1881 spin_unlock_irqrestore(shost->host_lock, flags);
1882}
1883
1884/*
1885 * Function: scsi_get_host_dev()
1886 *
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001887 * Purpose: Create a scsi_device that points to the host adapter itself.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888 *
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001889 * Arguments: SHpnt - Host that needs a scsi_device
Linus Torvalds1da177e2005-04-16 15:20:36 -07001890 *
1891 * Lock status: None assumed.
1892 *
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001893 * Returns: The scsi_device or NULL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001894 *
1895 * Notes:
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001896 * Attach a single scsi_device to the Scsi_Host - this should
Linus Torvalds1da177e2005-04-16 15:20:36 -07001897 * be made to look like a "pseudo-device" that points to the
1898 * HA itself.
1899 *
1900 * Note - this device is not accessible from any high-level
1901 * drivers (including generics), which is probably not
1902 * optimal. We can add hooks later to attach
1903 */
1904struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
1905{
Alan Sterne517d312005-07-26 10:18:45 -04001906 struct scsi_device *sdev = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001907 struct scsi_target *starget;
1908
Arjan van de Ven0b950672006-01-11 13:16:10 +01001909 mutex_lock(&shost->scan_mutex);
Alan Sterne517d312005-07-26 10:18:45 -04001910 if (!scsi_host_scan_allowed(shost))
1911 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001912 starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id);
1913 if (!starget)
Alan Sterne517d312005-07-26 10:18:45 -04001914 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001915
1916 sdev = scsi_alloc_sdev(starget, 0, NULL);
1917 if (sdev) {
1918 sdev->sdev_gendev.parent = get_device(&starget->dev);
1919 sdev->borken = 0;
James Bottomley884d25c2006-09-05 16:26:41 -05001920 } else
1921 scsi_target_reap(starget);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001922 put_device(&starget->dev);
Alan Sterne517d312005-07-26 10:18:45 -04001923 out:
Arjan van de Ven0b950672006-01-11 13:16:10 +01001924 mutex_unlock(&shost->scan_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001925 return sdev;
1926}
1927EXPORT_SYMBOL(scsi_get_host_dev);
1928
1929/*
1930 * Function: scsi_free_host_dev()
1931 *
1932 * Purpose: Free a scsi_device that points to the host adapter itself.
1933 *
Christoph Hellwigf64a1812005-10-31 18:32:08 +01001934 * Arguments: SHpnt - Host that needs a scsi_device
Linus Torvalds1da177e2005-04-16 15:20:36 -07001935 *
1936 * Lock status: None assumed.
1937 *
1938 * Returns: Nothing
1939 *
1940 * Notes:
1941 */
1942void scsi_free_host_dev(struct scsi_device *sdev)
1943{
1944 BUG_ON(sdev->id != sdev->host->this_id);
1945
James Bottomley6f3a2022005-09-22 20:33:28 -05001946 scsi_destroy_sdev(sdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001947}
1948EXPORT_SYMBOL(scsi_free_host_dev);
1949