blob: 5e7528cc81a8e624f8ef64a869eca06b18918126 [file] [log] [blame]
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +01001/*
2 * spcp8x5 USB to serial adaptor driver
3 *
4 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
5 * Copyright (C) 2006 S1 Corp.
6 *
7 * Original driver for 2.6.10 pl2303 driver by
8 * Greg Kroah-Hartman (greg@kroah.com)
9 * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 *
17 */
18#include <linux/kernel.h>
19#include <linux/errno.h>
20#include <linux/init.h>
21#include <linux/slab.h>
22#include <linux/tty.h>
23#include <linux/tty_driver.h>
24#include <linux/tty_flip.h>
25#include <linux/module.h>
26#include <linux/spinlock.h>
27#include <linux/usb.h>
28#include <linux/usb/serial.h>
29
30
31/* Version Information */
32#define DRIVER_VERSION "v0.04"
33#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
34
35static int debug;
36
37#define SPCP8x5_007_VID 0x04FC
38#define SPCP8x5_007_PID 0x0201
39#define SPCP8x5_008_VID 0x04fc
40#define SPCP8x5_008_PID 0x0235
41#define SPCP8x5_PHILIPS_VID 0x0471
42#define SPCP8x5_PHILIPS_PID 0x081e
43#define SPCP8x5_INTERMATIC_VID 0x04FC
44#define SPCP8x5_INTERMATIC_PID 0x0204
45#define SPCP8x5_835_VID 0x04fc
46#define SPCP8x5_835_PID 0x0231
47
48static struct usb_device_id id_table [] = {
49 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
50 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
51 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
52 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
53 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)},
54 { } /* Terminating entry */
55};
56MODULE_DEVICE_TABLE(usb, id_table);
57
58struct spcp8x5_usb_ctrl_arg {
59 u8 type;
60 u8 cmd;
61 u8 cmd_type;
62 u16 value;
63 u16 index;
64 u16 length;
65};
66
67/* wait 30s before close */
68#define SPCP8x5_CLOSING_WAIT (30*HZ)
69
70#define SPCP8x5_BUF_SIZE 1024
71
72
73/* spcp8x5 spec register define */
74#define MCR_CONTROL_LINE_RTS 0x02
75#define MCR_CONTROL_LINE_DTR 0x01
76#define MCR_DTR 0x01
77#define MCR_RTS 0x02
78
79#define MSR_STATUS_LINE_DCD 0x80
80#define MSR_STATUS_LINE_RI 0x40
81#define MSR_STATUS_LINE_DSR 0x20
82#define MSR_STATUS_LINE_CTS 0x10
83
84/* verdor command here , we should define myself */
85#define SET_DEFAULT 0x40
86#define SET_DEFAULT_TYPE 0x20
87
88#define SET_UART_FORMAT 0x40
89#define SET_UART_FORMAT_TYPE 0x21
90#define SET_UART_FORMAT_SIZE_5 0x00
91#define SET_UART_FORMAT_SIZE_6 0x01
92#define SET_UART_FORMAT_SIZE_7 0x02
93#define SET_UART_FORMAT_SIZE_8 0x03
94#define SET_UART_FORMAT_STOP_1 0x00
95#define SET_UART_FORMAT_STOP_2 0x04
96#define SET_UART_FORMAT_PAR_NONE 0x00
97#define SET_UART_FORMAT_PAR_ODD 0x10
98#define SET_UART_FORMAT_PAR_EVEN 0x30
99#define SET_UART_FORMAT_PAR_MASK 0xD0
100#define SET_UART_FORMAT_PAR_SPACE 0x90
101
102#define GET_UART_STATUS_TYPE 0xc0
103#define GET_UART_STATUS 0x22
104#define GET_UART_STATUS_MSR 0x06
105
106#define SET_UART_STATUS 0x40
107#define SET_UART_STATUS_TYPE 0x23
108#define SET_UART_STATUS_MCR 0x0004
109#define SET_UART_STATUS_MCR_DTR 0x01
110#define SET_UART_STATUS_MCR_RTS 0x02
111#define SET_UART_STATUS_MCR_LOOP 0x10
112
113#define SET_WORKING_MODE 0x40
114#define SET_WORKING_MODE_TYPE 0x24
115#define SET_WORKING_MODE_U2C 0x00
116#define SET_WORKING_MODE_RS485 0x01
117#define SET_WORKING_MODE_PDMA 0x02
118#define SET_WORKING_MODE_SPP 0x03
119
120#define SET_FLOWCTL_CHAR 0x40
121#define SET_FLOWCTL_CHAR_TYPE 0x25
122
123#define GET_VERSION 0xc0
124#define GET_VERSION_TYPE 0x26
125
126#define SET_REGISTER 0x40
127#define SET_REGISTER_TYPE 0x27
128
129#define GET_REGISTER 0xc0
130#define GET_REGISTER_TYPE 0x28
131
132#define SET_RAM 0x40
133#define SET_RAM_TYPE 0x31
134
135#define GET_RAM 0xc0
136#define GET_RAM_TYPE 0x32
137
138/* how come ??? */
139#define UART_STATE 0x08
140#define UART_STATE_TRANSIENT_MASK 0x74
141#define UART_DCD 0x01
142#define UART_DSR 0x02
143#define UART_BREAK_ERROR 0x04
144#define UART_RING 0x08
145#define UART_FRAME_ERROR 0x10
146#define UART_PARITY_ERROR 0x20
147#define UART_OVERRUN_ERROR 0x40
148#define UART_CTS 0x80
149
150enum spcp8x5_type {
151 SPCP825_007_TYPE,
152 SPCP825_008_TYPE,
153 SPCP825_PHILIP_TYPE,
154 SPCP825_INTERMATIC_TYPE,
155 SPCP835_TYPE,
156};
157
158/* 1st in 1st out buffer 4 driver */
159struct ringbuf {
160 unsigned int buf_size;
161 char *buf_buf;
162 char *buf_get;
163 char *buf_put;
164};
165
166/* alloc the ring buf and alloc the buffer itself */
167static inline struct ringbuf *alloc_ringbuf(unsigned int size)
168{
169 struct ringbuf *pb;
170
171 if (size == 0)
172 return NULL;
173
174 pb = kmalloc(sizeof(*pb), GFP_KERNEL);
175 if (pb == NULL)
176 return NULL;
177
178 pb->buf_buf = kmalloc(size, GFP_KERNEL);
179 if (pb->buf_buf == NULL) {
180 kfree(pb);
181 return NULL;
182 }
183
184 pb->buf_size = size;
185 pb->buf_get = pb->buf_put = pb->buf_buf;
186
187 return pb;
188}
189
190/* free the ring buf and the buffer itself */
191static inline void free_ringbuf(struct ringbuf *pb)
192{
193 if (pb != NULL) {
194 kfree(pb->buf_buf);
195 kfree(pb);
196 }
197}
198
199/* clear pipo , juest repoint the pointer here */
200static inline void clear_ringbuf(struct ringbuf *pb)
201{
202 if (pb != NULL)
203 pb->buf_get = pb->buf_put;
204}
205
206/* get the number of data in the pipo */
207static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
208{
209 if (pb == NULL)
210 return 0;
Alan Cox0487b582008-07-22 11:15:08 +0100211 return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100212}
213
214/* get the number of space in the pipo */
215static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
216{
217 if (pb == NULL)
218 return 0;
Alan Cox0487b582008-07-22 11:15:08 +0100219 return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100220}
221
222/* put count data into pipo */
223static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
224 unsigned int count)
225{
226 unsigned int len;
227
228 if (pb == NULL)
229 return 0;
230
231 len = ringbuf_avail_space(pb);
232 if (count > len)
233 count = len;
234
235 if (count == 0)
236 return 0;
237
238 len = pb->buf_buf + pb->buf_size - pb->buf_put;
239 if (count > len) {
240 memcpy(pb->buf_put, buf, len);
241 memcpy(pb->buf_buf, buf+len, count - len);
242 pb->buf_put = pb->buf_buf + count - len;
243 } else {
244 memcpy(pb->buf_put, buf, count);
245 if (count < len)
246 pb->buf_put += count;
247 else /* count == len */
248 pb->buf_put = pb->buf_buf;
249 }
250 return count;
251}
252
253/* get count data from pipo */
254static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
255 unsigned int count)
256{
257 unsigned int len;
258
259 if (pb == NULL || buf == NULL)
260 return 0;
261
262 len = ringbuf_avail_data(pb);
263 if (count > len)
264 count = len;
265
266 if (count == 0)
267 return 0;
268
269 len = pb->buf_buf + pb->buf_size - pb->buf_get;
270 if (count > len) {
271 memcpy(buf, pb->buf_get, len);
272 memcpy(buf+len, pb->buf_buf, count - len);
273 pb->buf_get = pb->buf_buf + count - len;
274 } else {
275 memcpy(buf, pb->buf_get, count);
276 if (count < len)
277 pb->buf_get += count;
278 else /* count == len */
279 pb->buf_get = pb->buf_buf;
280 }
281
282 return count;
283}
284
285static struct usb_driver spcp8x5_driver = {
286 .name = "spcp8x5",
287 .probe = usb_serial_probe,
288 .disconnect = usb_serial_disconnect,
289 .id_table = id_table,
290 .no_dynamic_id = 1,
291};
292
293
294struct spcp8x5_private {
295 spinlock_t lock;
296 struct ringbuf *buf;
297 int write_urb_in_use;
298 enum spcp8x5_type type;
299 wait_queue_head_t delta_msr_wait;
300 u8 line_control;
301 u8 line_status;
302 u8 termios_initialized;
303};
304
305/* desc : when device plug in,this function would be called.
306 * thanks to usb_serial subsystem,then do almost every things for us. And what
307 * we should do just alloc the buffer */
308static int spcp8x5_startup(struct usb_serial *serial)
309{
310 struct spcp8x5_private *priv;
311 int i;
312 enum spcp8x5_type type = SPCP825_007_TYPE;
Al Virofd05e722008-04-28 07:00:16 +0100313 u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100314
Al Virofd05e722008-04-28 07:00:16 +0100315 if (product == 0x0201)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100316 type = SPCP825_007_TYPE;
Al Virofd05e722008-04-28 07:00:16 +0100317 else if (product == 0x0231)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100318 type = SPCP835_TYPE;
Al Virofd05e722008-04-28 07:00:16 +0100319 else if (product == 0x0235)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100320 type = SPCP825_008_TYPE;
Al Virofd05e722008-04-28 07:00:16 +0100321 else if (product == 0x0204)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100322 type = SPCP825_INTERMATIC_TYPE;
Al Virofd05e722008-04-28 07:00:16 +0100323 else if (product == 0x0471 &&
324 serial->dev->descriptor.idVendor == cpu_to_le16(0x081e))
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100325 type = SPCP825_PHILIP_TYPE;
326 dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type);
327
328 for (i = 0; i < serial->num_ports; ++i) {
329 priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL);
330 if (!priv)
331 goto cleanup;
332
333 spin_lock_init(&priv->lock);
334 priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
335 if (priv->buf == NULL)
336 goto cleanup2;
337
338 init_waitqueue_head(&priv->delta_msr_wait);
339 priv->type = type;
340 usb_set_serial_port_data(serial->port[i] , priv);
341
342 }
343
344 return 0;
345
346cleanup2:
347 kfree(priv);
348cleanup:
349 for (--i; i >= 0; --i) {
350 priv = usb_get_serial_port_data(serial->port[i]);
351 free_ringbuf(priv->buf);
352 kfree(priv);
353 usb_set_serial_port_data(serial->port[i] , NULL);
354 }
355 return -ENOMEM;
356}
357
358/* call when the device plug out. free all the memory alloced by probe */
359static void spcp8x5_shutdown(struct usb_serial *serial)
360{
361 int i;
362 struct spcp8x5_private *priv;
363
364 for (i = 0; i < serial->num_ports; i++) {
365 priv = usb_get_serial_port_data(serial->port[i]);
366 if (priv) {
367 free_ringbuf(priv->buf);
368 kfree(priv);
369 usb_set_serial_port_data(serial->port[i] , NULL);
370 }
371 }
372}
373
374/* set the modem control line of the device.
375 * NOTE spcp825-007 not supported this */
376static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value,
377 enum spcp8x5_type type)
378{
379 int retval;
380 u8 mcr = 0 ;
381
382 if (type == SPCP825_007_TYPE)
383 return -EPERM;
384
385 mcr = (unsigned short)value;
386 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
387 SET_UART_STATUS_TYPE, SET_UART_STATUS,
388 mcr, 0x04, NULL, 0, 100);
389 if (retval != 0)
390 dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval);
391 return retval;
392}
393
394/* get the modem status register of the device
395 * NOTE spcp825-007 not supported this */
396static int spcp8x5_get_msr(struct usb_device *dev, u8 *status,
397 enum spcp8x5_type type)
398{
399 u8 *status_buffer;
400 int ret;
401
402 /* I return Permited not support here but seem inval device
403 * is more fix */
404 if (type == SPCP825_007_TYPE)
405 return -EPERM;
406 if (status == NULL)
407 return -EINVAL;
408
409 status_buffer = kmalloc(1, GFP_KERNEL);
410 if (!status_buffer)
411 return -ENOMEM;
412 status_buffer[0] = status[0];
413
414 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
415 GET_UART_STATUS, GET_UART_STATUS_TYPE,
416 0, GET_UART_STATUS_MSR, status_buffer, 1, 100);
417 if (ret < 0)
418 dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)",
419 status_buffer, ret);
420
421 dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer);
422 status[0] = status_buffer[0];
423 kfree(status_buffer);
424
425 return ret;
426}
427
428/* select the work mode.
429 * NOTE this function not supported by spcp825-007 */
430static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
431 u16 index, enum spcp8x5_type type)
432{
433 int ret;
434
435 /* I return Permited not support here but seem inval device
436 * is more fix */
437 if (type == SPCP825_007_TYPE)
438 return;
439
440 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
441 SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
442 value, index, NULL, 0, 100);
443 dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index);
444 if (ret < 0)
445 dev_dbg(&dev->dev,
446 "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
447}
448
449/* close the serial port. We should wait for data sending to device 1st and
450 * then kill all urb. */
Alan Cox95da3102008-07-22 11:09:07 +0100451static void spcp8x5_close(struct tty_struct *tty,
452 struct usb_serial_port *port, struct file *filp)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100453{
454 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
455 unsigned long flags;
456 unsigned int c_cflag;
457 int bps;
458 long timeout;
459 wait_queue_t wait;
460 int result;
461
462 dbg("%s - port %d", __func__, port->number);
463
464 /* wait for data to drain from the buffer */
465 spin_lock_irqsave(&priv->lock, flags);
466 timeout = SPCP8x5_CLOSING_WAIT;
467 init_waitqueue_entry(&wait, current);
Alan Cox95da3102008-07-22 11:09:07 +0100468 add_wait_queue(&tty->write_wait, &wait);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100469 for (;;) {
470 set_current_state(TASK_INTERRUPTIBLE);
471 if (ringbuf_avail_data(priv->buf) == 0 ||
472 timeout == 0 || signal_pending(current))
473 break;
474 spin_unlock_irqrestore(&priv->lock, flags);
475 timeout = schedule_timeout(timeout);
476 spin_lock_irqsave(&priv->lock, flags);
477 }
478 set_current_state(TASK_RUNNING);
Alan Cox95da3102008-07-22 11:09:07 +0100479 remove_wait_queue(&tty->write_wait, &wait);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100480
481 /* clear out any remaining data in the buffer */
482 clear_ringbuf(priv->buf);
483 spin_unlock_irqrestore(&priv->lock, flags);
484
485 /* wait for characters to drain from the device (this is long enough
486 * for the entire all byte spcp8x5 hardware buffer to drain with no
487 * flow control for data rates of 1200 bps or more, for lower rates we
488 * should really know how much data is in the buffer to compute a delay
489 * that is not unnecessarily long) */
Alan Cox95da3102008-07-22 11:09:07 +0100490 bps = tty_get_baud_rate(tty);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100491 if (bps > 1200)
492 timeout = max((HZ*2560) / bps, HZ/10);
493 else
494 timeout = 2*HZ;
495 set_current_state(TASK_INTERRUPTIBLE);
496 schedule_timeout(timeout);
497
498 /* clear control lines */
Alan Cox95da3102008-07-22 11:09:07 +0100499 if (tty) {
500 c_cflag = tty->termios->c_cflag;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100501 if (c_cflag & HUPCL) {
502 spin_lock_irqsave(&priv->lock, flags);
503 priv->line_control = 0;
504 spin_unlock_irqrestore(&priv->lock, flags);
505 spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
506 }
507 }
508
509 /* kill urb */
510 if (port->write_urb != NULL) {
511 result = usb_unlink_urb(port->write_urb);
512 if (result)
513 dev_dbg(&port->dev,
514 "usb_unlink_urb(write_urb) = %d\n", result);
515 }
516 result = usb_unlink_urb(port->read_urb);
517 if (result)
518 dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
519}
520
521/* set the serial param for transfer. we should check if we really need to
Alan Cox95da3102008-07-22 11:09:07 +0100522 * transfer. if we set flow control we should do this too. */
523static void spcp8x5_set_termios(struct tty_struct *tty,
524 struct usb_serial_port *port, struct ktermios *old_termios)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100525{
526 struct usb_serial *serial = port->serial;
527 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
528 unsigned long flags;
Alan Cox95da3102008-07-22 11:09:07 +0100529 unsigned int cflag = tty->termios->c_cflag;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100530 unsigned int old_cflag = old_termios->c_cflag;
531 unsigned short uartdata;
532 unsigned char buf[2] = {0, 0};
533 int baud;
534 int i;
535 u8 control;
536
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100537 /* for the 1st time call this function */
538 spin_lock_irqsave(&priv->lock, flags);
539 if (!priv->termios_initialized) {
Alan Cox95da3102008-07-22 11:09:07 +0100540 *(tty->termios) = tty_std_termios;
541 tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
542 tty->termios->c_ispeed = 115200;
543 tty->termios->c_ospeed = 115200;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100544 priv->termios_initialized = 1;
545 }
546 spin_unlock_irqrestore(&priv->lock, flags);
547
548 /* check that they really want us to change something */
Alan Cox95da3102008-07-22 11:09:07 +0100549 if (!tty_termios_hw_change(tty->termios, old_termios))
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100550 return;
551
552 /* set DTR/RTS active */
553 spin_lock_irqsave(&priv->lock, flags);
554 control = priv->line_control;
555 if ((old_cflag & CBAUD) == B0) {
556 priv->line_control |= MCR_DTR;
557 if (!(old_cflag & CRTSCTS))
558 priv->line_control |= MCR_RTS;
559 }
560 if (control != priv->line_control) {
561 control = priv->line_control;
562 spin_unlock_irqrestore(&priv->lock, flags);
563 spcp8x5_set_ctrlLine(serial->dev, control , priv->type);
564 } else {
565 spin_unlock_irqrestore(&priv->lock, flags);
566 }
567
568 /* Set Baud Rate */
Alan Cox95da3102008-07-22 11:09:07 +0100569 baud = tty_get_baud_rate(tty);;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100570 switch (baud) {
571 case 300: buf[0] = 0x00; break;
572 case 600: buf[0] = 0x01; break;
573 case 1200: buf[0] = 0x02; break;
574 case 2400: buf[0] = 0x03; break;
575 case 4800: buf[0] = 0x04; break;
576 case 9600: buf[0] = 0x05; break;
577 case 19200: buf[0] = 0x07; break;
578 case 38400: buf[0] = 0x09; break;
579 case 57600: buf[0] = 0x0a; break;
580 case 115200: buf[0] = 0x0b; break;
581 case 230400: buf[0] = 0x0c; break;
582 case 460800: buf[0] = 0x0d; break;
583 case 921600: buf[0] = 0x0e; break;
584/* case 1200000: buf[0] = 0x0f; break; */
585/* case 2400000: buf[0] = 0x10; break; */
586 case 3000000: buf[0] = 0x11; break;
587/* case 6000000: buf[0] = 0x12; break; */
588 case 0:
589 case 1000000:
590 buf[0] = 0x0b; break;
591 default:
Greg Kroah-Hartman194343d2008-08-20 16:56:34 -0700592 dev_err(&port->dev, "spcp825 driver does not support the "
593 "baudrate requested, using default of 9600.\n");
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100594 }
595
596 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
597 if (cflag & CSIZE) {
598 switch (cflag & CSIZE) {
599 case CS5:
600 buf[1] |= SET_UART_FORMAT_SIZE_5;
601 break;
602 case CS6:
603 buf[1] |= SET_UART_FORMAT_SIZE_6;
604 break;
605 case CS7:
606 buf[1] |= SET_UART_FORMAT_SIZE_7;
607 break;
608 default:
609 case CS8:
610 buf[1] |= SET_UART_FORMAT_SIZE_8;
611 break;
612 }
613 }
614
615 /* Set Stop bit2 : 0:1bit 1:2bit */
616 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
617 SET_UART_FORMAT_STOP_1;
618
619 /* Set Parity bit3-4 01:Odd 11:Even */
620 if (cflag & PARENB) {
621 buf[1] |= (cflag & PARODD) ?
622 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
623 } else
624 buf[1] |= SET_UART_FORMAT_PAR_NONE;
625
626 uartdata = buf[0] | buf[1]<<8;
627
628 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
629 SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
630 uartdata, 0, NULL, 0, 100);
631 if (i < 0)
Greg Kroah-Hartman194343d2008-08-20 16:56:34 -0700632 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
633 uartdata, i);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100634 dbg("0x21:0x40:0:0 %d\n", i);
635
636 if (cflag & CRTSCTS) {
637 /* enable hardware flow control */
638 spcp8x5_set_workMode(serial->dev, 0x000a,
639 SET_WORKING_MODE_U2C, priv->type);
640 }
641 return;
642}
643
644/* open the serial port. do some usb system call. set termios and get the line
645 * status of the device. then submit the read urb */
Alan Cox95da3102008-07-22 11:09:07 +0100646static int spcp8x5_open(struct tty_struct *tty,
647 struct usb_serial_port *port, struct file *filp)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100648{
649 struct ktermios tmp_termios;
650 struct usb_serial *serial = port->serial;
651 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
652 int ret;
653 unsigned long flags;
654 u8 status = 0x30;
655 /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
656
657 dbg("%s - port %d", __func__, port->number);
658
659 usb_clear_halt(serial->dev, port->write_urb->pipe);
660 usb_clear_halt(serial->dev, port->read_urb->pipe);
661
662 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
663 0x09, 0x00,
664 0x01, 0x00, NULL, 0x00, 100);
665 if (ret)
666 return ret;
667
668 spin_lock_irqsave(&priv->lock, flags);
Alan Cox95da3102008-07-22 11:09:07 +0100669 if (tty && (tty->termios->c_cflag & CBAUD))
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100670 priv->line_control = MCR_DTR | MCR_RTS;
671 else
672 priv->line_control = 0;
673 spin_unlock_irqrestore(&priv->lock, flags);
674
675 spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
676
677 /* Setup termios */
Alan Cox95da3102008-07-22 11:09:07 +0100678 if (tty)
679 spcp8x5_set_termios(tty, port, &tmp_termios);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100680
681 spcp8x5_get_msr(serial->dev, &status, priv->type);
682
683 /* may be we should update uart status here but now we did not do */
684 spin_lock_irqsave(&priv->lock, flags);
685 priv->line_status = status & 0xf0 ;
686 spin_unlock_irqrestore(&priv->lock, flags);
687
688 /* FIXME: need to assert RTS and DTR if CRTSCTS off */
689
690 dbg("%s - submitting read urb", __func__);
691 port->read_urb->dev = serial->dev;
692 ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
693 if (ret) {
Alan Cox95da3102008-07-22 11:09:07 +0100694 spcp8x5_close(tty, port, NULL);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100695 return -EPROTO;
696 }
697 return 0;
698}
699
700/* bulk read call back function. check the status of the urb. if transfer
701 * failed return. then update the status and the tty send data to tty subsys.
702 * submit urb again.
703 */
704static void spcp8x5_read_bulk_callback(struct urb *urb)
705{
706 struct usb_serial_port *port = urb->context;
707 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
708 struct tty_struct *tty;
709 unsigned char *data = urb->transfer_buffer;
710 unsigned long flags;
711 int i;
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800712 int result = urb->status;
713 u8 status;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100714 char tty_flag;
715
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800716 dev_dbg(&port->dev, "start, result = %d, urb->actual_length = %d\n,",
717 result, urb->actual_length);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100718
719 /* check the urb status */
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800720 if (result) {
Alan Cox95da3102008-07-22 11:09:07 +0100721 if (!port->port.count)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100722 return;
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800723 if (result == -EPROTO) {
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100724 /* spcp8x5 mysteriously fails with -EPROTO */
725 /* reschedule the read */
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100726 urb->dev = port->serial->dev;
727 result = usb_submit_urb(urb , GFP_ATOMIC);
728 if (result)
729 dev_dbg(&port->dev,
730 "failed submitting read urb %d\n",
731 result);
732 return;
733 }
734 dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
735 return;
736 }
737
738 /* get tty_flag from status */
739 tty_flag = TTY_NORMAL;
740
741 spin_lock_irqsave(&priv->lock, flags);
742 status = priv->line_status;
743 priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
744 spin_unlock_irqrestore(&priv->lock, flags);
745 /* wake up the wait for termios */
746 wake_up_interruptible(&priv->delta_msr_wait);
747
748 /* break takes precedence over parity, which takes precedence over
749 * framing errors */
750 if (status & UART_BREAK_ERROR)
751 tty_flag = TTY_BREAK;
752 else if (status & UART_PARITY_ERROR)
753 tty_flag = TTY_PARITY;
754 else if (status & UART_FRAME_ERROR)
755 tty_flag = TTY_FRAME;
756 dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
757
Alan Cox4a90f092008-10-13 10:39:46 +0100758 tty = tty_port_tty_get(&port->port);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100759 if (tty && urb->actual_length) {
760 tty_buffer_request_room(tty, urb->actual_length + 1);
761 /* overrun is special, not associated with a char */
762 if (status & UART_OVERRUN_ERROR)
763 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
764 for (i = 0; i < urb->actual_length; ++i)
765 tty_insert_flip_char(tty, data[i], tty_flag);
766 tty_flip_buffer_push(tty);
767 }
Alan Cox4a90f092008-10-13 10:39:46 +0100768 tty_kref_put(tty);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100769
770 /* Schedule the next read _if_ we are still open */
Alan Cox95da3102008-07-22 11:09:07 +0100771 if (port->port.count) {
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100772 urb->dev = port->serial->dev;
773 result = usb_submit_urb(urb , GFP_ATOMIC);
774 if (result)
775 dev_dbg(&port->dev, "failed submitting read urb %d\n",
776 result);
777 }
778
779 return;
780}
781
782/* get data from ring buffer and then write to usb bus */
783static void spcp8x5_send(struct usb_serial_port *port)
784{
785 int count, result;
786 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
787 unsigned long flags;
788
789 spin_lock_irqsave(&priv->lock, flags);
790
791 if (priv->write_urb_in_use) {
792 dev_dbg(&port->dev, "write urb still used\n");
793 spin_unlock_irqrestore(&priv->lock, flags);
794 return;
795 }
796
797 /* send the 1st urb for writting */
798 memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
799 count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
800 port->bulk_out_size);
801
802 if (count == 0) {
803 spin_unlock_irqrestore(&priv->lock, flags);
804 return;
805 }
806
807 /* update the urb status */
808 priv->write_urb_in_use = 1;
809
810 spin_unlock_irqrestore(&priv->lock, flags);
811
812 port->write_urb->transfer_buffer_length = count;
813 port->write_urb->dev = port->serial->dev;
814
815 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
816 if (result) {
817 dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
818 result);
819 priv->write_urb_in_use = 0;
820 /* TODO: reschedule spcp8x5_send */
821 }
822
823
824 schedule_work(&port->work);
825}
826
827/* this is the call back function for write urb. NOTE we should not sleep in
828 * this routine. check the urb return code and then submit the write urb again
829 * to hold the write loop */
830static void spcp8x5_write_bulk_callback(struct urb *urb)
831{
832 struct usb_serial_port *port = urb->context;
833 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
834 int result;
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800835 int status = urb->status;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100836
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800837 switch (status) {
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100838 case 0:
839 /* success */
840 break;
841 case -ECONNRESET:
842 case -ENOENT:
843 case -ESHUTDOWN:
844 /* this urb is terminated, clean up */
845 dev_dbg(&port->dev, "urb shutting down with status: %d\n",
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800846 status);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100847 priv->write_urb_in_use = 0;
848 return;
849 default:
850 /* error in the urb, so we have to resubmit it */
851 dbg("%s - Overflow in write", __func__);
852 dbg("%s - nonzero write bulk status received: %d",
Greg Kroah-Hartman50de36f2008-12-10 16:00:30 -0800853 __func__, status);
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100854 port->write_urb->transfer_buffer_length = 1;
855 port->write_urb->dev = port->serial->dev;
856 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
857 if (result)
858 dev_dbg(&port->dev,
859 "failed resubmitting write urb %d\n", result);
860 else
861 return;
862 }
863
864 priv->write_urb_in_use = 0;
865
866 /* send any buffered data */
867 spcp8x5_send(port);
868}
869
870/* write data to ring buffer. and then start the write transfer */
Alan Cox95da3102008-07-22 11:09:07 +0100871static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100872 const unsigned char *buf, int count)
873{
874 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
875 unsigned long flags;
876
877 dev_dbg(&port->dev, "%d bytes\n", count);
878
879 if (!count)
880 return count;
881
882 spin_lock_irqsave(&priv->lock, flags);
883 count = put_ringbuf(priv->buf, buf, count);
884 spin_unlock_irqrestore(&priv->lock, flags);
885
886 spcp8x5_send(port);
887
888 return count;
889}
890
891static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
892 unsigned int arg)
893{
894 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
895 unsigned long flags;
896 unsigned int prevstatus;
897 unsigned int status;
898 unsigned int changed;
899
900 spin_lock_irqsave(&priv->lock, flags);
901 prevstatus = priv->line_status;
902 spin_unlock_irqrestore(&priv->lock, flags);
903
904 while (1) {
905 /* wake up in bulk read */
906 interruptible_sleep_on(&priv->delta_msr_wait);
907
908 /* see if a signal did it */
909 if (signal_pending(current))
910 return -ERESTARTSYS;
911
912 spin_lock_irqsave(&priv->lock, flags);
913 status = priv->line_status;
914 spin_unlock_irqrestore(&priv->lock, flags);
915
916 changed = prevstatus^status;
917
918 if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) ||
919 ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) ||
920 ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) ||
921 ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS)))
922 return 0;
923
924 prevstatus = status;
925 }
926 /* NOTREACHED */
927 return 0;
928}
929
Alan Cox95da3102008-07-22 11:09:07 +0100930static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100931 unsigned int cmd, unsigned long arg)
932{
Alan Cox95da3102008-07-22 11:09:07 +0100933 struct usb_serial_port *port = tty->driver_data;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100934 dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
935
936 switch (cmd) {
937 case TIOCMIWAIT:
938 dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
939 return spcp8x5_wait_modem_info(port, arg);
940
941 default:
942 dbg("%s not supported = 0x%04x", __func__, cmd);
943 break;
944 }
945
946 return -ENOIOCTLCMD;
947}
948
Alan Cox95da3102008-07-22 11:09:07 +0100949static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100950 unsigned int set, unsigned int clear)
951{
Alan Cox95da3102008-07-22 11:09:07 +0100952 struct usb_serial_port *port = tty->driver_data;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100953 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
954 unsigned long flags;
955 u8 control;
956
957 spin_lock_irqsave(&priv->lock, flags);
958 if (set & TIOCM_RTS)
959 priv->line_control |= MCR_RTS;
960 if (set & TIOCM_DTR)
961 priv->line_control |= MCR_DTR;
962 if (clear & TIOCM_RTS)
963 priv->line_control &= ~MCR_RTS;
964 if (clear & TIOCM_DTR)
965 priv->line_control &= ~MCR_DTR;
966 control = priv->line_control;
967 spin_unlock_irqrestore(&priv->lock, flags);
968
969 return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
970}
971
Alan Cox95da3102008-07-22 11:09:07 +0100972static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100973{
Alan Cox95da3102008-07-22 11:09:07 +0100974 struct usb_serial_port *port = tty->driver_data;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100975 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
976 unsigned long flags;
977 unsigned int mcr;
978 unsigned int status;
979 unsigned int result;
980
981 spin_lock_irqsave(&priv->lock, flags);
982 mcr = priv->line_control;
983 status = priv->line_status;
984 spin_unlock_irqrestore(&priv->lock, flags);
985
986 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
987 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
988 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
989 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
990 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
991 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);
992
993 return result;
994}
995
996/* get the avail space room in ring buffer */
Alan Cox95da3102008-07-22 11:09:07 +0100997static int spcp8x5_write_room(struct tty_struct *tty)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +0100998{
Alan Cox95da3102008-07-22 11:09:07 +0100999 struct usb_serial_port *port = tty->driver_data;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +01001000 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
1001 int room = 0;
1002 unsigned long flags;
1003
1004 spin_lock_irqsave(&priv->lock, flags);
1005 room = ringbuf_avail_space(priv->buf);
1006 spin_unlock_irqrestore(&priv->lock, flags);
1007
1008 return room;
1009}
1010
1011/* get the number of avail data in write ring buffer */
Alan Cox95da3102008-07-22 11:09:07 +01001012static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +01001013{
Alan Cox95da3102008-07-22 11:09:07 +01001014 struct usb_serial_port *port = tty->driver_data;
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +01001015 struct spcp8x5_private *priv = usb_get_serial_port_data(port);
1016 int chars = 0;
1017 unsigned long flags;
1018
1019 spin_lock_irqsave(&priv->lock, flags);
1020 chars = ringbuf_avail_data(priv->buf);
1021 spin_unlock_irqrestore(&priv->lock, flags);
1022
1023 return chars;
1024}
1025
1026/* All of the device info needed for the spcp8x5 SIO serial converter */
1027static struct usb_serial_driver spcp8x5_device = {
1028 .driver = {
1029 .owner = THIS_MODULE,
1030 .name = "SPCP8x5",
1031 },
1032 .id_table = id_table,
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +01001033 .num_ports = 1,
1034 .open = spcp8x5_open,
1035 .close = spcp8x5_close,
1036 .write = spcp8x5_write,
1037 .set_termios = spcp8x5_set_termios,
1038 .ioctl = spcp8x5_ioctl,
1039 .tiocmget = spcp8x5_tiocmget,
1040 .tiocmset = spcp8x5_tiocmset,
1041 .write_room = spcp8x5_write_room,
1042 .read_bulk_callback = spcp8x5_read_bulk_callback,
1043 .write_bulk_callback = spcp8x5_write_bulk_callback,
1044 .chars_in_buffer = spcp8x5_chars_in_buffer,
1045 .attach = spcp8x5_startup,
1046 .shutdown = spcp8x5_shutdown,
1047};
1048
1049static int __init spcp8x5_init(void)
1050{
1051 int retval;
1052 retval = usb_serial_register(&spcp8x5_device);
1053 if (retval)
1054 goto failed_usb_serial_register;
1055 retval = usb_register(&spcp8x5_driver);
1056 if (retval)
1057 goto failed_usb_register;
Greg Kroah-Hartmanc197a8d2008-08-18 13:21:04 -07001058 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1059 DRIVER_DESC "\n");
Greg Kroah-Hartman619a6f12008-02-07 23:59:03 +01001060 return 0;
1061failed_usb_register:
1062 usb_serial_deregister(&spcp8x5_device);
1063failed_usb_serial_register:
1064 return retval;
1065}
1066
1067static void __exit spcp8x5_exit(void)
1068{
1069 usb_deregister(&spcp8x5_driver);
1070 usb_serial_deregister(&spcp8x5_device);
1071}
1072
1073module_init(spcp8x5_init);
1074module_exit(spcp8x5_exit);
1075
1076MODULE_DESCRIPTION(DRIVER_DESC);
1077MODULE_VERSION(DRIVER_VERSION);
1078MODULE_LICENSE("GPL");
1079
1080module_param(debug, bool, S_IRUGO | S_IWUSR);
1081MODULE_PARM_DESC(debug, "Debug enabled or not");