blob: 61776764d9f49eb3e0222fff76a8db387e51b4ed [file] [log] [blame]
Ben Dooks342e20f2009-07-30 23:23:29 +01001/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
2 *
Ben Dooksccae9412009-11-13 22:54:14 +00003 * Copyright (c) 2006-2009 Simtec Electronics
Ben Dooks342e20f2009-07-30 23:23:29 +01004 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 * Vincent Sanders <vince@simtec.co.uk>
7 *
8 * S3C2440/S3C2442 CPU Frequency scaling
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15#include <linux/init.h>
16#include <linux/module.h>
17#include <linux/interrupt.h>
18#include <linux/ioport.h>
19#include <linux/cpufreq.h>
Kay Sievers4a858cf2011-12-21 16:01:38 -080020#include <linux/device.h>
Ben Dooks342e20f2009-07-30 23:23:29 +010021#include <linux/delay.h>
22#include <linux/clk.h>
23#include <linux/err.h>
24#include <linux/io.h>
25
26#include <mach/hardware.h>
27
28#include <asm/mach/arch.h>
29#include <asm/mach/map.h>
30
31#include <mach/regs-clock.h>
32
33#include <plat/cpu.h>
34#include <plat/cpu-freq-core.h>
35#include <plat/clock.h>
36
37static struct clk *xtal;
38static struct clk *fclk;
39static struct clk *hclk;
40static struct clk *armclk;
41
42/* HDIV: 1, 2, 3, 4, 6, 8 */
43
44static inline int within_khz(unsigned long a, unsigned long b)
45{
46 long diff = a - b;
47
48 return (diff >= -1000 && diff <= 1000);
49}
50
51/**
52 * s3c2440_cpufreq_calcdivs - calculate divider settings
53 * @cfg: The cpu frequency settings.
54 *
55 * Calcualte the divider values for the given frequency settings
56 * specified in @cfg. The values are stored in @cfg for later use
57 * by the relevant set routine if the request settings can be reached.
58 */
59int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
60{
61 unsigned int hdiv, pdiv;
62 unsigned long hclk, fclk, armclk;
63 unsigned long hclk_max;
64
65 fclk = cfg->freq.fclk;
66 armclk = cfg->freq.armclk;
67 hclk_max = cfg->max.hclk;
68
69 s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
70 __func__, fclk, armclk, hclk_max);
71
72 if (armclk > fclk) {
73 printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
74 armclk = fclk;
75 }
76
77 /* if we are in DVS, we need HCLK to be <= ARMCLK */
78 if (armclk < fclk && armclk < hclk_max)
79 hclk_max = armclk;
80
81 for (hdiv = 1; hdiv < 9; hdiv++) {
82 if (hdiv == 5 || hdiv == 7)
83 hdiv++;
84
85 hclk = (fclk / hdiv);
86 if (hclk <= hclk_max || within_khz(hclk, hclk_max))
87 break;
88 }
89
90 s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
91
92 if (hdiv > 8)
93 goto invalid;
94
95 pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
96
97 if ((hclk / pdiv) > cfg->max.pclk)
98 pdiv++;
99
100 s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
101
102 if (pdiv > 2)
103 goto invalid;
104
105 pdiv *= hdiv;
106
107 /* calculate a valid armclk */
108
109 if (armclk < hclk)
110 armclk = hclk;
111
112 /* if we're running armclk lower than fclk, this really means
113 * that the system should go into dvs mode, which means that
114 * armclk is connected to hclk. */
115 if (armclk < fclk) {
116 cfg->divs.dvs = 1;
117 armclk = hclk;
118 } else
119 cfg->divs.dvs = 0;
120
121 cfg->freq.armclk = armclk;
122
123 /* store the result, and then return */
124
125 cfg->divs.h_divisor = hdiv;
126 cfg->divs.p_divisor = pdiv;
127
128 return 0;
129
130 invalid:
131 return -EINVAL;
132}
133
134#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
135 S3C2440_CAMDIVN_HCLK4_HALF)
136
137/**
138 * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
139 * @cfg: The cpu frequency settings.
140 *
141 * Set the divisors from the settings in @cfg, which where generated
142 * during the calculation phase by s3c2440_cpufreq_calcdivs().
143 */
144static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
145{
146 unsigned long clkdiv, camdiv;
147
148 s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
149 cfg->divs.h_divisor, cfg->divs.p_divisor);
150
151 clkdiv = __raw_readl(S3C2410_CLKDIVN);
152 camdiv = __raw_readl(S3C2440_CAMDIVN);
153
154 clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
155 camdiv &= ~CAMDIVN_HCLK_HALF;
156
157 switch (cfg->divs.h_divisor) {
158 case 1:
159 clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
160 break;
161
162 case 2:
163 clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
164 break;
165
166 case 6:
167 camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
168 case 3:
169 clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
170 break;
171
172 case 8:
173 camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
174 case 4:
175 clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
176 break;
177
178 default:
179 BUG(); /* we don't expect to get here. */
180 }
181
182 if (cfg->divs.p_divisor != cfg->divs.h_divisor)
183 clkdiv |= S3C2440_CLKDIVN_PDIVN;
184
185 /* todo - set pclk. */
186
187 /* Write the divisors first with hclk intentionally halved so that
188 * when we write clkdiv we will under-frequency instead of over. We
189 * then make a short delay and remove the hclk halving if necessary.
190 */
191
192 __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
193 __raw_writel(clkdiv, S3C2410_CLKDIVN);
194
195 ndelay(20);
196 __raw_writel(camdiv, S3C2440_CAMDIVN);
197
198 clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
199}
200
201static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
202 int *divs,
203 struct cpufreq_frequency_table *table,
204 size_t table_size)
205{
206 unsigned long freq;
207 int index = 0;
208 int div;
209
210 for (div = *divs; div > 0; div = *divs++) {
211 freq = fclk / div;
212
213 if (freq > max_hclk && div != 1)
214 continue;
215
216 freq /= 1000; /* table is in kHz */
217 index = s3c_cpufreq_addfreq(table, index, table_size, freq);
218 if (index < 0)
219 break;
220 }
221
222 return index;
223}
224
225static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
226
227static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
228 struct cpufreq_frequency_table *table,
229 size_t table_size)
230{
231 int ret;
232
233 WARN_ON(cfg->info == NULL);
234 WARN_ON(cfg->board == NULL);
235
236 ret = run_freq_for(cfg->info->max.hclk,
237 cfg->info->max.fclk,
238 hclk_divs,
239 table, table_size);
240
241 s3c_freq_dbg("%s: returning %d\n", __func__, ret);
242
243 return ret;
244}
245
246struct s3c_cpufreq_info s3c2440_cpufreq_info = {
247 .max = {
248 .fclk = 400000000,
249 .hclk = 133333333,
250 .pclk = 66666666,
251 },
252
253 .locktime_m = 300,
254 .locktime_u = 300,
255 .locktime_bits = 16,
256
257 .name = "s3c244x",
258 .calc_iotiming = s3c2410_iotiming_calc,
259 .set_iotiming = s3c2410_iotiming_set,
260 .get_iotiming = s3c2410_iotiming_get,
261 .set_fvco = s3c2410_set_fvco,
262
263 .set_refresh = s3c2410_cpufreq_setrefresh,
264 .set_divs = s3c2440_cpufreq_setdivs,
265 .calc_divs = s3c2440_cpufreq_calcdivs,
266 .calc_freqtable = s3c2440_cpufreq_calctable,
267
268 .resume_clocks = s3c244x_setup_clocks,
Ben Dookse6d197a2009-07-30 23:23:42 +0100269
270 .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
Ben Dooks342e20f2009-07-30 23:23:29 +0100271};
272
Heiko Stuebner04511a62012-01-27 15:35:25 +0900273static int s3c2440_cpufreq_add(struct device *dev,
274 struct subsys_interface *sif)
Ben Dooks342e20f2009-07-30 23:23:29 +0100275{
276 xtal = s3c_cpufreq_clk_get(NULL, "xtal");
277 hclk = s3c_cpufreq_clk_get(NULL, "hclk");
278 fclk = s3c_cpufreq_clk_get(NULL, "fclk");
279 armclk = s3c_cpufreq_clk_get(NULL, "armclk");
280
281 if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
282 printk(KERN_ERR "%s: failed to get clocks\n", __func__);
283 return -ENOENT;
284 }
285
286 return s3c_cpufreq_register(&s3c2440_cpufreq_info);
287}
288
Kay Sievers4a858cf2011-12-21 16:01:38 -0800289static struct subsys_interface s3c2440_cpufreq_interface = {
290 .name = "s3c2440_cpufreq",
291 .subsys = &s3c2440_subsys,
292 .add_dev = s3c2440_cpufreq_add,
Ben Dooks342e20f2009-07-30 23:23:29 +0100293};
294
295static int s3c2440_cpufreq_init(void)
296{
Kay Sievers4a858cf2011-12-21 16:01:38 -0800297 return subsys_interface_register(&s3c2440_cpufreq_interface);
Ben Dooks342e20f2009-07-30 23:23:29 +0100298}
299
300/* arch_initcall adds the clocks we need, so use subsys_initcall. */
301subsys_initcall(s3c2440_cpufreq_init);
302
Kay Sievers4a858cf2011-12-21 16:01:38 -0800303static struct subsys_interface s3c2442_cpufreq_interface = {
304 .name = "s3c2442_cpufreq",
305 .subsys = &s3c2442_subsys,
306 .add_dev = s3c2440_cpufreq_add,
Ben Dooks342e20f2009-07-30 23:23:29 +0100307};
308
309static int s3c2442_cpufreq_init(void)
310{
Kay Sievers4a858cf2011-12-21 16:01:38 -0800311 return subsys_interface_register(&s3c2442_cpufreq_interface);
Ben Dooks342e20f2009-07-30 23:23:29 +0100312}
313
314subsys_initcall(s3c2442_cpufreq_init);