drivers/usb/storage/scsiglue.c

/* Driver for USB Mass Storage compliant devices
 * SCSI layer glue code
 *
 * $Id: scsiglue.c,v 1.26 2002/04/22 03:39:43 mdharm Exp $
 *
 * Current development and maintenance by:
 *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
 *
 * Developed with the assistance of:
 *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
 *   (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
 *
 * Initial work by:
 *   (c) 1999 Michael Gee (michael@linuxspecific.com)
 *
 * This driver is based on the 'USB Mass Storage Class' document. This
 * describes in detail the protocol used to communicate with such
 * devices.  Clearly, the designers had SCSI and ATAPI commands in
 * mind when they created this document.  The commands are all very
 * similar to commands in the SCSI-II and ATAPI specifications.
 *
 * It is important to note that in a number of cases this class
 * exhibits class-specific exemptions from the USB specification.
 * Notably the usage of NAK, STALL and ACK differs from the norm, in
 * that they are used to communicate wait, failed and OK on commands.
 *
 * Also, for certain devices, the interrupt endpoint is used to convey
 * status of a command.
 *
 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
 * information about this driver.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mutex.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_devinfo.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>

#include "usb.h"
#include "scsiglue.h"
#include "debug.h"
#include "transport.h"
#include "protocol.h"

/***********************************************************************
 * Host functions 
 ***********************************************************************/

static const char* host_info(struct Scsi_Host *host)
{
	return "SCSI emulation for USB Mass Storage devices";
}

static int slave_alloc (struct scsi_device *sdev)
{
	/*
	 * Set the INQUIRY transfer length to 36.  We don't use any of
	 * the extra data and many devices choke if asked for more or
	 * less than 36 bytes.
	 */
	sdev->inquiry_len = 36;
	return 0;
}

static int slave_configure(struct scsi_device *sdev)
{
	struct us_data *us = host_to_us(sdev->host);

	/* Scatter-gather buffers (all but the last) must have a length
	 * divisible by the bulk maxpacket size.  Otherwise a data packet
	 * would end up being short, causing a premature end to the data
	 * transfer.  Since high-speed bulk pipes have a maxpacket size
	 * of 512, we'll use that as the scsi device queue's DMA alignment
	 * mask.  Guaranteeing proper alignment of the first buffer will
	 * have the desired effect because, except at the beginning and
	 * the end, scatter-gather buffers follow page boundaries. */
	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));

	/* Set the SCSI level to at least 2.  We'll leave it at 3 if that's
	 * what is originally reported.  We need this to avoid confusing
	 * the SCSI layer with devices that report 0 or 1, but need 10-byte
	 * commands (ala ATAPI devices behind certain bridges, or devices
	 * which simply have broken INQUIRY data).
	 *
	 * NOTE: This means /dev/sg programs (ala cdrecord) will get the
	 * actual information.  This seems to be the preference for
	 * programs like that.
	 *
	 * NOTE: This also means that /proc/scsi/scsi and sysfs may report
	 * the actual value or the modified one, depending on where the
	 * data comes from.
	 */
	if (sdev->scsi_level < SCSI_2)
		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;

	/* According to the technical support people at Genesys Logic,
	 * devices using their chips have problems transferring more than
	 * 32 KB at a time.  In practice people have found that 64 KB
	 * works okay and that's what Windows does.  But we'll be
	 * conservative; people can always use the sysfs interface to
	 * increase max_sectors. */
	if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS &&
			sdev->request_queue->max_sectors > 64)
		blk_queue_max_sectors(sdev->request_queue, 64);

	/* We can't put these settings in slave_alloc() because that gets
	 * called before the device type is known.  Consequently these
	 * settings can't be overridden via the scsi devinfo mechanism. */
	if (sdev->type == TYPE_DISK) {

		/* Disk-type devices use MODE SENSE(6) if the protocol
		 * (SubClass) is Transparent SCSI, otherwise they use
		 * MODE SENSE(10). */
		if (us->subclass != US_SC_SCSI)
			sdev->use_10_for_ms = 1;

		/* Many disks only accept MODE SENSE transfer lengths of
		 * 192 bytes (that's what Windows uses). */
		sdev->use_192_bytes_for_3f = 1;

		/* Some devices don't like MODE SENSE with page=0x3f,
		 * which is the command used for checking if a device
		 * is write-protected.  Now that we tell the sd driver
		 * to do a 192-byte transfer with this command the
		 * majority of devices work fine, but a few still can't
		 * handle it.  The sd driver will simply assume those
		 * devices are write-enabled. */
		if (us->flags & US_FL_NO_WP_DETECT)
			sdev->skip_ms_page_3f = 1;

		/* A number of devices have problems with MODE SENSE for
		 * page x08, so we will skip it. */
		sdev->skip_ms_page_8 = 1;

		/* Some disks return the total number of blocks in response
		 * to READ CAPACITY rather than the highest block number.
		 * If this device makes that mistake, tell the sd driver. */
		if (us->flags & US_FL_FIX_CAPACITY)
			sdev->fix_capacity = 1;

		/* Some devices report a SCSI revision level above 2 but are
		 * unable to handle the REPORT LUNS command (for which
		 * support is mandatory at level 3).  Since we already have
		 * a Get-Max-LUN request, we won't lose much by setting the
		 * revision level down to 2.  The only devices that would be
		 * affected are those with sparse LUNs. */
		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;

		/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
		 * Hardware Error) when any low-level error occurs,
		 * recoverable or not.  Setting this flag tells the SCSI
		 * midlayer to retry such commands, which frequently will
		 * succeed and fix the error.  The worst this can lead to
		 * is an occasional series of retries that will all fail. */
		sdev->retry_hwerror = 1;

	} else {

		/* Non-disk-type devices don't need to blacklist any pages
		 * or to force 192-byte transfer lengths for MODE SENSE.
		 * But they do need to use MODE SENSE(10). */
		sdev->use_10_for_ms = 1;
	}

	/* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
	 * REMOVAL command, so suppress those commands. */
	if (us->flags & US_FL_NOT_LOCKABLE)
		sdev->lockable = 0;

	/* this is to satisfy the compiler, tho I don't think the 
	 * return code is ever checked anywhere. */
	return 0;
}

/* queue a command */
/* This is always called with scsi_lock(host) held */
static int queuecommand(struct scsi_cmnd *srb,
			void (*done)(struct scsi_cmnd *))
{
	struct us_data *us = host_to_us(srb->device->host);

	US_DEBUGP("%s called\n", __FUNCTION__);

	/* check for state-transition errors */
	if (us->srb != NULL) {
		printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
			__FUNCTION__, us->srb);
		return SCSI_MLQUEUE_HOST_BUSY;
	}

	/* fail the command if we are disconnecting */
	if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
		US_DEBUGP("Fail command during disconnect\n");
		srb->result = DID_NO_CONNECT << 16;
		done(srb);
		return 0;
	}

	/* enqueue the command and wake up the control thread */
	srb->scsi_done = done;
	us->srb = srb;
	up(&(us->sema));

	return 0;
}

/***********************************************************************
 * Error handling functions
 ***********************************************************************/

/* Command timeout and abort */
static int command_abort(struct scsi_cmnd *srb)
{
	struct us_data *us = host_to_us(srb->device->host);

	US_DEBUGP("%s called\n", __FUNCTION__);

	/* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
	 * bits are protected by the host lock. */
	scsi_lock(us_to_host(us));

	/* Is this command still active? */
	if (us->srb != srb) {
		scsi_unlock(us_to_host(us));
		US_DEBUGP ("-- nothing to abort\n");
		return FAILED;
	}

	/* Set the TIMED_OUT bit.  Also set the ABORTING bit, but only if
	 * a device reset isn't already in progress (to avoid interfering
	 * with the reset).  Note that we must retain the host lock while
	 * calling usb_stor_stop_transport(); otherwise it might interfere
	 * with an auto-reset that begins as soon as we release the lock. */
	set_bit(US_FLIDX_TIMED_OUT, &us->flags);
	if (!test_bit(US_FLIDX_RESETTING, &us->flags)) {
		set_bit(US_FLIDX_ABORTING, &us->flags);
		usb_stor_stop_transport(us);
	}
	scsi_unlock(us_to_host(us));

	/* Wait for the aborted command to finish */
	wait_for_completion(&us->notify);
	return SUCCESS;
}

/* This invokes the transport reset mechanism to reset the state of the
 * device */
static int device_reset(struct scsi_cmnd *srb)
{
	struct us_data *us = host_to_us(srb->device->host);
	int result;

	US_DEBUGP("%s called\n", __FUNCTION__);

	/* lock the device pointers and do the reset */
	mutex_lock(&(us->dev_mutex));
	result = us->transport_reset(us);
	mutex_unlock(&us->dev_mutex);

	return result < 0 ? FAILED : SUCCESS;
}

/* Simulate a SCSI bus reset by resetting the device's USB port. */
static int bus_reset(struct scsi_cmnd *srb)
{
	struct us_data *us = host_to_us(srb->device->host);
	int result;

	US_DEBUGP("%s called\n", __FUNCTION__);

	mutex_lock(&(us->dev_mutex));
	result = usb_stor_port_reset(us);
	mutex_unlock(&us->dev_mutex);

	return result < 0 ? FAILED : SUCCESS;
}

/* Report a driver-initiated device reset to the SCSI layer.
 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
 * The caller must own the SCSI host lock. */
void usb_stor_report_device_reset(struct us_data *us)
{
	int i;
	struct Scsi_Host *host = us_to_host(us);

	scsi_report_device_reset(host, 0, 0);
	if (us->flags & US_FL_SCM_MULT_TARG) {
		for (i = 1; i < host->max_id; ++i)
			scsi_report_device_reset(host, 0, i);
	}
}

/* Report a driver-initiated bus reset to the SCSI layer.
 * Calling this for a SCSI-initiated reset is unnecessary but harmless.
 * The caller must own the SCSI host lock. */
void usb_stor_report_bus_reset(struct us_data *us)
{
	scsi_report_bus_reset(us_to_host(us), 0);
}

/***********************************************************************
 * /proc/scsi/ functions
 ***********************************************************************/

/* we use this macro to help us write into the buffer */
#undef SPRINTF
#define SPRINTF(args...) \
	do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)

static int proc_info (struct Scsi_Host *host, char *buffer,
		char **start, off_t offset, int length, int inout)
{
	struct us_data *us = host_to_us(host);
	char *pos = buffer;
	const char *string;

	/* if someone is sending us data, just throw it away */
	if (inout)
		return length;

	/* print the controller name */
	SPRINTF("   Host scsi%d: usb-storage\n", host->host_no);

	/* print product, vendor, and serial number strings */
	if (us->pusb_dev->manufacturer)
		string = us->pusb_dev->manufacturer;
	else if (us->unusual_dev->vendorName)
		string = us->unusual_dev->vendorName;
	else
		string = "Unknown";
	SPRINTF("       Vendor: %s\n", string);
	if (us->pusb_dev->product)
		string = us->pusb_dev->product;
	else if (us->unusual_dev->productName)
		string = us->unusual_dev->productName;
	else
		string = "Unknown";
	SPRINTF("      Product: %s\n", string);
	if (us->pusb_dev->serial)
		string = us->pusb_dev->serial;
	else
		string = "None";
	SPRINTF("Serial Number: %s\n", string);

	/* show the protocol and transport */
	SPRINTF("     Protocol: %s\n", us->protocol_name);
	SPRINTF("    Transport: %s\n", us->transport_name);

	/* show the device flags */
	if (pos < buffer + length) {
		pos += sprintf(pos, "       Quirks:");

#define US_FLAG(name, value) \
	if (us->flags & value) pos += sprintf(pos, " " #name);
US_DO_ALL_FLAGS
#undef US_FLAG

		*(pos++) = '\n';
	}

	/*
	 * Calculate start of next buffer, and return value.
	 */
	*start = buffer + offset;

	if ((pos - buffer) < offset)
		return (0);
	else if ((pos - buffer - offset) < length)
		return (pos - buffer - offset);
	else
		return (length);
}

/***********************************************************************
 * Sysfs interface
 ***********************************************************************/

/* Output routine for the sysfs max_sectors file */
static ssize_t show_max_sectors(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct scsi_device *sdev = to_scsi_device(dev);

	return sprintf(buf, "%u\n", sdev->request_queue->max_sectors);
}

/* Input routine for the sysfs max_sectors file */
static ssize_t store_max_sectors(struct device *dev, struct device_attribute *attr, const char *buf,
		size_t count)
{
	struct scsi_device *sdev = to_scsi_device(dev);
	unsigned short ms;

	if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) {
		blk_queue_max_sectors(sdev->request_queue, ms);
		return strlen(buf);
	}
	return -EINVAL;	
}

static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors,
		store_max_sectors);

static struct device_attribute *sysfs_device_attr_list[] = {
		&dev_attr_max_sectors,
		NULL,
		};

/*
 * this defines our host template, with which we'll allocate hosts
 */

struct scsi_host_template usb_stor_host_template = {
	/* basic userland interface stuff */
	.name =				"usb-storage",
	.proc_name =			"usb-storage",
	.proc_info =			proc_info,
	.info =				host_info,

	/* command interface -- queued only */
	.queuecommand =			queuecommand,

	/* error and abort handlers */
	.eh_abort_handler =		command_abort,
	.eh_device_reset_handler =	device_reset,
	.eh_bus_reset_handler =		bus_reset,

	/* queue commands only, only one command per LUN */
	.can_queue =			1,
	.cmd_per_lun =			1,

	/* unknown initiator id */
	.this_id =			-1,

	.slave_alloc =			slave_alloc,
	.slave_configure =		slave_configure,

	/* lots of sg segments can be handled */
	.sg_tablesize =			SG_ALL,

	/* limit the total size of a transfer to 120 KB */
	.max_sectors =                  240,

	/* merge commands... this seems to help performance, but
	 * periodically someone should test to see which setting is more
	 * optimal.
	 */
	.use_clustering =		1,

	/* emulated HBA */
	.emulated =			1,

	/* we do our own delay after a device or bus reset */
	.skip_settle_delay =		1,

	/* sysfs device attributes */
	.sdev_attrs =			sysfs_device_attr_list,

	/* module management */
	.module =			THIS_MODULE
};

/* To Report "Illegal Request: Invalid Field in CDB */
unsigned char usb_stor_sense_invalidCDB[18] = {
	[0]	= 0x70,			    /* current error */
	[2]	= ILLEGAL_REQUEST,	    /* Illegal Request = 0x05 */
	[7]	= 0x0a,			    /* additional length */
	[12]	= 0x24			    /* Invalid Field in CDB */
};