drivers/net/atl1c/atl1c_hw.c

/*
 * Copyright(c) 2007 Atheros Corporation. All rights reserved.
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 */
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mii.h>
#include <linux/crc32.h>

#include "atl1c.h"

/*
 * check_eeprom_exist
 * return 1 if eeprom exist
 */
int atl1c_check_eeprom_exist(struct atl1c_hw *hw)
{
	u32 data;

	AT_READ_REG(hw, REG_TWSI_DEBUG, &data);
	if (data & TWSI_DEBUG_DEV_EXIST)
		return 1;

	return 0;
}

void atl1c_hw_set_mac_addr(struct atl1c_hw *hw)
{
	u32 value;
	/*
	 * 00-0B-6A-F6-00-DC
	 * 0:  6AF600DC 1: 000B
	 * low dword
	 */
	value = (((u32)hw->mac_addr[2]) << 24) |
		(((u32)hw->mac_addr[3]) << 16) |
		(((u32)hw->mac_addr[4]) << 8)  |
		(((u32)hw->mac_addr[5])) ;
	AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
	/* hight dword */
	value = (((u32)hw->mac_addr[0]) << 8) |
		(((u32)hw->mac_addr[1])) ;
	AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
}

/*
 * atl1c_get_permanent_address
 * return 0 if get valid mac address,
 */
static int atl1c_get_permanent_address(struct atl1c_hw *hw)
{
	u32 addr[2];
	u32 i;
	u32 otp_ctrl_data;
	u32 twsi_ctrl_data;
	u8  eth_addr[ETH_ALEN];
	u16 phy_data;
	bool raise_vol = false;

	/* init */
	addr[0] = addr[1] = 0;
	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
	if (atl1c_check_eeprom_exist(hw)) {
		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
			/* Enable OTP CLK */
			if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
				otp_ctrl_data |= OTP_CTRL_CLK_EN;
				AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
				AT_WRITE_FLUSH(hw);
				msleep(1);
			}
		}

		if (hw->nic_type == athr_l2c_b ||
		    hw->nic_type == athr_l2c_b2 ||
		    hw->nic_type == athr_l1d) {
			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);
			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
				goto out;
			phy_data &= 0xFF7F;
			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);

			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
				goto out;
			phy_data |= 0x8;
			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
			udelay(20);
			raise_vol = true;
		}

		AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
		twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
		AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data);
		for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) {
			msleep(10);
			AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
			if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0)
				break;
		}
		if (i >= AT_TWSI_EEPROM_TIMEOUT)
			return -1;
	}
	/* Disable OTP_CLK */
	if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) {
		if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
			otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
			AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
			AT_WRITE_FLUSH(hw);
			msleep(1);
		}
	}
	if (raise_vol) {
		if (hw->nic_type == athr_l2c_b ||
		    hw->nic_type == athr_l2c_b2 ||
		    hw->nic_type == athr_l1d) {
			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);
			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
				goto out;
			phy_data |= 0x80;
			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);

			atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
			if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
				goto out;
			phy_data &= 0xFFF7;
			atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data);
			udelay(20);
		}
	}

	/* maybe MAC-address is from BIOS */
	AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]);
	AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]);
	*(u32 *) &eth_addr[2] = swab32(addr[0]);
	*(u16 *) &eth_addr[0] = swab16(*(u16 *)&addr[1]);

	if (is_valid_ether_addr(eth_addr)) {
		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
		return 0;
	}

out:
	return -1;
}

bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value)
{
	int i;
	int ret = false;
	u32 otp_ctrl_data;
	u32 control;
	u32 data;

	if (offset & 3)
		return ret; /* address do not align */

	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
	if (!(otp_ctrl_data & OTP_CTRL_CLK_EN))
		AT_WRITE_REG(hw, REG_OTP_CTRL,
				(otp_ctrl_data | OTP_CTRL_CLK_EN));

	AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0);
	control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT;
	AT_WRITE_REG(hw, REG_EEPROM_CTRL, control);

	for (i = 0; i < 10; i++) {
		udelay(100);
		AT_READ_REG(hw, REG_EEPROM_CTRL, &control);
		if (control & EEPROM_CTRL_RW)
			break;
	}
	if (control & EEPROM_CTRL_RW) {
		AT_READ_REG(hw, REG_EEPROM_CTRL, &data);
		AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value);
		data = data & 0xFFFF;
		*p_value = swab32((data << 16) | (*p_value >> 16));
		ret = true;
	}
	if (!(otp_ctrl_data & OTP_CTRL_CLK_EN))
		AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);

	return ret;
}
/*
 * Reads the adapter's MAC address from the EEPROM
 *
 * hw - Struct containing variables accessed by shared code
 */
int atl1c_read_mac_addr(struct atl1c_hw *hw)
{
	int err = 0;

	err = atl1c_get_permanent_address(hw);
	if (err)
		random_ether_addr(hw->perm_mac_addr);

	memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
	return 0;
}

/*
 * atl1c_hash_mc_addr
 *  purpose
 *      set hash value for a multicast address
 *      hash calcu processing :
 *          1. calcu 32bit CRC for multicast address
 *          2. reverse crc with MSB to LSB
 */
u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr)
{
	u32 crc32;
	u32 value = 0;
	int i;

	crc32 = ether_crc_le(6, mc_addr);
	for (i = 0; i < 32; i++)
		value |= (((crc32 >> i) & 1) << (31 - i));

	return value;
}

/*
 * Sets the bit in the multicast table corresponding to the hash value.
 * hw - Struct containing variables accessed by shared code
 * hash_value - Multicast address hash value
 */
void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value)
{
	u32 hash_bit, hash_reg;
	u32 mta;

	/*
	 * The HASH Table  is a register array of 2 32-bit registers.
	 * It is treated like an array of 64 bits.  We want to set
	 * bit BitArray[hash_value]. So we figure out what register
	 * the bit is in, read it, OR in the new bit, then write
	 * back the new value.  The register is determined by the
	 * upper bit of the hash value and the bit within that
	 * register are determined by the lower 5 bits of the value.
	 */
	hash_reg = (hash_value >> 31) & 0x1;
	hash_bit = (hash_value >> 26) & 0x1F;

	mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);

	mta |= (1 << hash_bit);

	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
}

/*
 * Reads the value from a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
 */
int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
{
	u32 val;
	int i;

	val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
		MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
		MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;

	AT_WRITE_REG(hw, REG_MDIO_CTRL, val);

	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		AT_READ_REG(hw, REG_MDIO_CTRL, &val);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
	}
	if (!(val & (MDIO_START | MDIO_BUSY))) {
		*phy_data = (u16)val;
		return 0;
	}

	return -1;
}

/*
 * Writes a value to a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 */
int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data)
{
	int i;
	u32 val;

	val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT   |
	       (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
	       MDIO_SUP_PREAMBLE | MDIO_START |
	       MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;

	AT_WRITE_REG(hw, REG_MDIO_CTRL, val);

	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
		udelay(2);
		AT_READ_REG(hw, REG_MDIO_CTRL, &val);
		if (!(val & (MDIO_START | MDIO_BUSY)))
			break;
	}

	if (!(val & (MDIO_START | MDIO_BUSY)))
		return 0;

	return -1;
}

/*
 * Configures PHY autoneg and flow control advertisement settings
 *
 * hw - Struct containing variables accessed by shared code
 */
static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
{
	u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK;
	u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
				~GIGA_CR_1000T_SPEED_MASK;

	if (hw->autoneg_advertised & ADVERTISED_10baseT_Half)
		mii_adv_data |= ADVERTISE_10HALF;
	if (hw->autoneg_advertised & ADVERTISED_10baseT_Full)
		mii_adv_data |= ADVERTISE_10FULL;
	if (hw->autoneg_advertised & ADVERTISED_100baseT_Half)
		mii_adv_data |= ADVERTISE_100HALF;
	if (hw->autoneg_advertised & ADVERTISED_100baseT_Full)
		mii_adv_data |= ADVERTISE_100FULL;

	if (hw->autoneg_advertised & ADVERTISED_Autoneg)
		mii_adv_data |= ADVERTISE_10HALF  | ADVERTISE_10FULL |
				ADVERTISE_100HALF | ADVERTISE_100FULL;

	if (hw->link_cap_flags & ATL1C_LINK_CAP_1000M) {
		if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half)
			mii_giga_ctrl_data |= ADVERTISE_1000HALF;
		if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full)
			mii_giga_ctrl_data |= ADVERTISE_1000FULL;
		if (hw->autoneg_advertised & ADVERTISED_Autoneg)
			mii_giga_ctrl_data |= ADVERTISE_1000HALF |
					ADVERTISE_1000FULL;
	}

	if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 ||
	    atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0)
		return -1;
	return 0;
}

void atl1c_phy_disable(struct atl1c_hw *hw)
{
	AT_WRITE_REGW(hw, REG_GPHY_CTRL,
			GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
}

static void atl1c_phy_magic_data(struct atl1c_hw *hw)
{
	u16 data;

	data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE |
		((1 & ANA_INTERVAL_SEL_TIMER_MASK) <<
		ANA_INTERVAL_SEL_TIMER_SHIFT);

	atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18);
	atl1c_write_phy_reg(hw, MII_DBG_DATA, data);

	data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG |
		ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL |
		ANA_SERDES_EN_LCKDT;

	atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5);
	atl1c_write_phy_reg(hw, MII_DBG_DATA, data);

	data = (44 & ANA_LONG_CABLE_TH_100_MASK) |
		((33 & ANA_SHORT_CABLE_TH_100_MASK) <<
		ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM |
		ANA_BP_SMALL_BW;

	atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54);
	atl1c_write_phy_reg(hw, MII_DBG_DATA, data);

	data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) <<
		ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
		ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
		ANA_IECHO_ADJ_0_SHIFT);

	atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4);
	atl1c_write_phy_reg(hw, MII_DBG_DATA, data);

	data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) <<
		ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE |
		ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M;

	atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0);
	atl1c_write_phy_reg(hw, MII_DBG_DATA, data);

	if (hw->ctrl_flags & ATL1C_HIB_DISABLE) {
		atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41);
		if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
			return;
		data &= ~ANA_TOP_PS_EN;
		atl1c_write_phy_reg(hw, MII_DBG_DATA, data);

		atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11);
		if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
			return;
		data &= ~ANA_PS_HIB_EN;
		atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
	}
}

int atl1c_phy_reset(struct atl1c_hw *hw)
{
	struct atl1c_adapter *adapter = hw->adapter;
	struct pci_dev *pdev = adapter->pdev;
	u16 phy_data;
	u32 phy_ctrl_data = GPHY_CTRL_DEFAULT;
	u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN;
	int err;

	if (hw->ctrl_flags & ATL1C_HIB_DISABLE)
		phy_ctrl_data &= ~GPHY_CTRL_HIB_EN;

	AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
	AT_WRITE_FLUSH(hw);
	msleep(40);
	phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
	AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
	AT_WRITE_FLUSH(hw);
	msleep(10);

	if (hw->nic_type == athr_l2c_b) {
		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x0A);
		atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
		atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xDFFF);
	}

	if (hw->nic_type == athr_l2c_b ||
	    hw->nic_type == athr_l2c_b2 ||
	    hw->nic_type == athr_l1d) {
		atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
		atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
		atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);
		msleep(20);
	}

	/*Enable PHY LinkChange Interrupt */
	err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
	if (err) {
		if (netif_msg_hw(adapter))
			dev_err(&pdev->dev,
				"Error enable PHY linkChange Interrupt\n");
		return err;
	}
	if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
		atl1c_phy_magic_data(hw);
	return 0;
}

int atl1c_phy_init(struct atl1c_hw *hw)
{
	struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
	struct pci_dev *pdev = adapter->pdev;
	int ret_val;
	u16 mii_bmcr_data = BMCR_RESET;
	u16 phy_id1, phy_id2;

	if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) ||
		(atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) {
			if (netif_msg_link(adapter))
				dev_err(&pdev->dev, "Error get phy ID\n");
		return -1;
	}
	switch (hw->media_type) {
	case MEDIA_TYPE_AUTO_SENSOR:
		ret_val = atl1c_phy_setup_adv(hw);
		if (ret_val) {
			if (netif_msg_link(adapter))
				dev_err(&pdev->dev,
					"Error Setting up Auto-Negotiation\n");
			return ret_val;
		}
		mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
		break;
	case MEDIA_TYPE_100M_FULL:
		mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX;
		break;
	case MEDIA_TYPE_100M_HALF:
		mii_bmcr_data |= BMCR_SPEED_100;
		break;
	case MEDIA_TYPE_10M_FULL:
		mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX;
		break;
	case MEDIA_TYPE_10M_HALF:
		mii_bmcr_data |= BMCR_SPEED_10;
		break;
	default:
		if (netif_msg_link(adapter))
			dev_err(&pdev->dev, "Wrong Media type %d\n",
				hw->media_type);
		return -1;
		break;
	}

	ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
	if (ret_val)
		return ret_val;
	hw->phy_configured = true;

	return 0;
}

/*
 * Detects the current speed and duplex settings of the hardware.
 *
 * hw - Struct containing variables accessed by shared code
 * speed - Speed of the connection
 * duplex - Duplex setting of the connection
 */
int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex)
{
	int err;
	u16 phy_data;

	/* Read   PHY Specific Status Register (17) */
	err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data);
	if (err)
		return err;

	if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED))
		return -1;

	switch (phy_data & GIGA_PSSR_SPEED) {
	case GIGA_PSSR_1000MBS:
		*speed = SPEED_1000;
		break;
	case GIGA_PSSR_100MBS:
		*speed = SPEED_100;
		break;
	case  GIGA_PSSR_10MBS:
		*speed = SPEED_10;
		break;
	default:
		return -1;
		break;
	}

	if (phy_data & GIGA_PSSR_DPLX)
		*duplex = FULL_DUPLEX;
	else
		*duplex = HALF_DUPLEX;

	return 0;
}

int atl1c_restart_autoneg(struct atl1c_hw *hw)
{
	int err = 0;
	u16 mii_bmcr_data = BMCR_RESET;

	err = atl1c_phy_setup_adv(hw);
	if (err)
		return err;
	mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;

	return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
}