blob: 635f3e286ad83a01a062d5bad763d6be54101b93 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# File system configuration
3#
4
5menu "File systems"
6
David Howells93614012006-09-30 20:45:40 +02007if BLOCK
8
Linus Torvalds1da177e2005-04-16 15:20:36 -07009config EXT2_FS
10 tristate "Second extended fs support"
11 help
12 Ext2 is a standard Linux file system for hard disks.
13
14 To compile this file system support as a module, choose M here: the
Jan Engelhardtd23edbd2006-12-12 19:07:45 +010015 module will be called ext2.
Linus Torvalds1da177e2005-04-16 15:20:36 -070016
17 If unsure, say Y.
18
19config EXT2_FS_XATTR
20 bool "Ext2 extended attributes"
21 depends on EXT2_FS
22 help
23 Extended attributes are name:value pairs associated with inodes by
24 the kernel or by users (see the attr(5) manual page, or visit
25 <http://acl.bestbits.at/> for details).
26
27 If unsure, say N.
28
29config EXT2_FS_POSIX_ACL
30 bool "Ext2 POSIX Access Control Lists"
31 depends on EXT2_FS_XATTR
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -070032 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -070033 help
34 Posix Access Control Lists (ACLs) support permissions for users and
35 groups beyond the owner/group/world scheme.
36
37 To learn more about Access Control Lists, visit the Posix ACLs for
38 Linux website <http://acl.bestbits.at/>.
39
40 If you don't know what Access Control Lists are, say N
41
42config EXT2_FS_SECURITY
43 bool "Ext2 Security Labels"
44 depends on EXT2_FS_XATTR
45 help
46 Security labels support alternative access control models
47 implemented by security modules like SELinux. This option
48 enables an extended attribute handler for file security
49 labels in the ext2 filesystem.
50
51 If you are not using a security module that requires using
52 extended attributes for file security labels, say N.
53
Carsten Otte6d791252005-06-23 22:05:26 -070054config EXT2_FS_XIP
55 bool "Ext2 execute in place support"
Al Viro0c426f22006-06-23 02:04:08 -070056 depends on EXT2_FS && MMU
Carsten Otte6d791252005-06-23 22:05:26 -070057 help
58 Execute in place can be used on memory-backed block devices. If you
59 enable this option, you can select to mount block devices which are
60 capable of this feature without using the page cache.
61
62 If you do not use a block device that is capable of using this,
63 or if unsure, say N.
64
65config FS_XIP
66# execute in place
67 bool
68 depends on EXT2_FS_XIP
69 default y
70
Linus Torvalds1da177e2005-04-16 15:20:36 -070071config EXT3_FS
72 tristate "Ext3 journalling file system support"
Mark Fashehb4e40a52005-12-15 14:31:24 -080073 select JBD
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 help
Matt LaPlantecc2e2762006-10-03 22:22:29 +020075 This is the journalling version of the Second extended file system
Linus Torvalds1da177e2005-04-16 15:20:36 -070076 (often called ext3), the de facto standard Linux file system
77 (method to organize files on a storage device) for hard disks.
78
Matt LaPlantecc2e2762006-10-03 22:22:29 +020079 The journalling code included in this driver means you do not have
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 to run e2fsck (file system checker) on your file systems after a
81 crash. The journal keeps track of any changes that were being made
82 at the time the system crashed, and can ensure that your file system
83 is consistent without the need for a lengthy check.
84
85 Other than adding the journal to the file system, the on-disk format
86 of ext3 is identical to ext2. It is possible to freely switch
87 between using the ext3 driver and the ext2 driver, as long as the
88 file system has been cleanly unmounted, or e2fsck is run on the file
89 system.
90
91 To add a journal on an existing ext2 file system or change the
92 behavior of ext3 file systems, you can use the tune2fs utility ("man
93 tune2fs"). To modify attributes of files and directories on ext3
94 file systems, use chattr ("man chattr"). You need to be using
95 e2fsprogs version 1.20 or later in order to create ext3 journals
96 (available at <http://sourceforge.net/projects/e2fsprogs/>).
97
98 To compile this file system support as a module, choose M here: the
Jan Engelhardtd23edbd2006-12-12 19:07:45 +010099 module will be called ext3.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100
101config EXT3_FS_XATTR
102 bool "Ext3 extended attributes"
103 depends on EXT3_FS
104 default y
105 help
106 Extended attributes are name:value pairs associated with inodes by
107 the kernel or by users (see the attr(5) manual page, or visit
108 <http://acl.bestbits.at/> for details).
109
110 If unsure, say N.
111
112 You need this for POSIX ACL support on ext3.
113
114config EXT3_FS_POSIX_ACL
115 bool "Ext3 POSIX Access Control Lists"
116 depends on EXT3_FS_XATTR
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700117 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700118 help
119 Posix Access Control Lists (ACLs) support permissions for users and
120 groups beyond the owner/group/world scheme.
121
122 To learn more about Access Control Lists, visit the Posix ACLs for
123 Linux website <http://acl.bestbits.at/>.
124
125 If you don't know what Access Control Lists are, say N
126
127config EXT3_FS_SECURITY
128 bool "Ext3 Security Labels"
129 depends on EXT3_FS_XATTR
130 help
131 Security labels support alternative access control models
132 implemented by security modules like SELinux. This option
133 enables an extended attribute handler for file security
134 labels in the ext3 filesystem.
135
136 If you are not using a security module that requires using
137 extended attributes for file security labels, say N.
138
Mingming Cao02ea2102006-10-11 01:20:56 -0700139config EXT4DEV_FS
140 tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
141 depends on EXPERIMENTAL
Mingming Caodab291a2006-10-11 01:21:01 -0700142 select JBD2
Andreas Dilger717d50e2007-10-16 18:38:25 -0400143 select CRC16
Mingming Caodab291a2006-10-11 01:21:01 -0700144 help
Mingming Cao02ea2102006-10-11 01:20:56 -0700145 Ext4dev is a predecessor filesystem of the next generation
146 extended fs ext4, based on ext3 filesystem code. It will be
147 renamed ext4 fs later, once ext4dev is mature and stabilized.
148
Mingming Caodab291a2006-10-11 01:21:01 -0700149 Unlike the change from ext2 filesystem to ext3 filesystem,
150 the on-disk format of ext4dev is not the same as ext3 any more:
Mingming Cao02ea2102006-10-11 01:20:56 -0700151 it is based on extent maps and it supports 48-bit physical block
Mingming Caodab291a2006-10-11 01:21:01 -0700152 numbers. These combined on-disk format changes will allow
Mingming Cao02ea2102006-10-11 01:20:56 -0700153 ext4dev/ext4 to handle more than 16 TB filesystem volumes --
154 a hard limit that ext3 cannot overcome without changing the
Mingming Caodab291a2006-10-11 01:21:01 -0700155 on-disk format.
Mingming Cao02ea2102006-10-11 01:20:56 -0700156
157 Other than extent maps and 48-bit block numbers, ext4dev also is
Mingming Caodab291a2006-10-11 01:21:01 -0700158 likely to have other new features such as persistent preallocation,
Mingming Cao02ea2102006-10-11 01:20:56 -0700159 high resolution time stamps, and larger file support etc. These
Mingming Caodab291a2006-10-11 01:21:01 -0700160 features will be added to ext4dev gradually.
Mingming Cao02ea2102006-10-11 01:20:56 -0700161
162 To compile this file system support as a module, choose M here. The
Jan Engelhardtd23edbd2006-12-12 19:07:45 +0100163 module will be called ext4dev.
Mingming Cao02ea2102006-10-11 01:20:56 -0700164
165 If unsure, say N.
166
167config EXT4DEV_FS_XATTR
168 bool "Ext4dev extended attributes"
169 depends on EXT4DEV_FS
170 default y
171 help
172 Extended attributes are name:value pairs associated with inodes by
173 the kernel or by users (see the attr(5) manual page, or visit
174 <http://acl.bestbits.at/> for details).
175
176 If unsure, say N.
177
178 You need this for POSIX ACL support on ext4dev/ext4.
179
180config EXT4DEV_FS_POSIX_ACL
181 bool "Ext4dev POSIX Access Control Lists"
182 depends on EXT4DEV_FS_XATTR
183 select FS_POSIX_ACL
184 help
185 POSIX Access Control Lists (ACLs) support permissions for users and
186 groups beyond the owner/group/world scheme.
187
188 To learn more about Access Control Lists, visit the POSIX ACLs for
189 Linux website <http://acl.bestbits.at/>.
190
191 If you don't know what Access Control Lists are, say N
192
193config EXT4DEV_FS_SECURITY
194 bool "Ext4dev Security Labels"
195 depends on EXT4DEV_FS_XATTR
196 help
197 Security labels support alternative access control models
198 implemented by security modules like SELinux. This option
199 enables an extended attribute handler for file security
200 labels in the ext4dev/ext4 filesystem.
201
202 If you are not using a security module that requires using
203 extended attributes for file security labels, say N.
204
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205config JBD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206 tristate
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207 help
Matt LaPlantecc2e2762006-10-03 22:22:29 +0200208 This is a generic journalling layer for block devices. It is
Mark Fashehb4e40a52005-12-15 14:31:24 -0800209 currently used by the ext3 and OCFS2 file systems, but it could
210 also be used to add journal support to other file systems or block
211 devices such as RAID or LVM.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700212
Mark Fashehb4e40a52005-12-15 14:31:24 -0800213 If you are using the ext3 or OCFS2 file systems, you need to
214 say Y here. If you are not using ext3 OCFS2 then you will probably
215 want to say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216
217 To compile this device as a module, choose M here: the module will be
Mark Fashehb4e40a52005-12-15 14:31:24 -0800218 called jbd. If you are compiling ext3 or OCFS2 into the kernel,
219 you cannot compile this code as a module.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220
221config JBD_DEBUG
222 bool "JBD (ext3) debugging support"
Jose R. Santosc2a91592007-10-18 23:39:22 -0700223 depends on JBD && DEBUG_FS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700224 help
225 If you are using the ext3 journaled file system (or potentially any
226 other file system/device using JBD), this option allows you to
227 enable debugging output while the system is running, in order to
228 help track down any problems you are having. By default the
229 debugging output will be turned off.
230
231 If you select Y here, then you will be able to turn on debugging
Jose R. Santosc2a91592007-10-18 23:39:22 -0700232 with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
233 number between 1 and 5, the higher the number, the more debugging
234 output is generated. To turn debugging off again, do
235 "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
Linus Torvalds1da177e2005-04-16 15:20:36 -0700236
Mingming Caodab291a2006-10-11 01:21:01 -0700237config JBD2
238 tristate
239 help
240 This is a generic journaling layer for block devices that support
241 both 32-bit and 64-bit block numbers. It is currently used by
242 the ext4dev/ext4 filesystem, but it could also be used to add
243 journal support to other file systems or block devices such
244 as RAID or LVM.
245
246 If you are using ext4dev/ext4, you need to say Y here. If you are not
247 using ext4dev/ext4 then you will probably want to say N.
248
249 To compile this device as a module, choose M here. The module will be
250 called jbd2. If you are compiling ext4dev/ext4 into the kernel,
251 you cannot compile this code as a module.
252
253config JBD2_DEBUG
254 bool "JBD2 (ext4dev/ext4) debugging support"
Jose R. Santos0f49d5d2007-07-18 08:50:18 -0400255 depends on JBD2 && DEBUG_FS
Mingming Caodab291a2006-10-11 01:21:01 -0700256 help
257 If you are using the ext4dev/ext4 journaled file system (or
258 potentially any other filesystem/device using JBD2), this option
259 allows you to enable debugging output while the system is running,
260 in order to help track down any problems you are having.
261 By default, the debugging output will be turned off.
262
263 If you select Y here, then you will be able to turn on debugging
Jose R. Santos0f49d5d2007-07-18 08:50:18 -0400264 with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a
265 number between 1 and 5. The higher the number, the more debugging
266 output is generated. To turn debugging off again, do
267 "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug".
Mingming Caodab291a2006-10-11 01:21:01 -0700268
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269config FS_MBCACHE
Mingming Cao02ea2102006-10-11 01:20:56 -0700270# Meta block cache for Extended Attributes (ext2/ext3/ext4)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700271 tristate
Mingming Cao02ea2102006-10-11 01:20:56 -0700272 depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
273 default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
274 default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275
276config REISERFS_FS
277 tristate "Reiserfs support"
278 help
279 Stores not just filenames but the files themselves in a balanced
Matt LaPlantecc2e2762006-10-03 22:22:29 +0200280 tree. Uses journalling.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700281
282 Balanced trees are more efficient than traditional file system
283 architectural foundations.
284
285 In general, ReiserFS is as fast as ext2, but is very efficient with
286 large directories and small files. Additional patches are needed
287 for NFS and quotas, please see <http://www.namesys.com/> for links.
288
289 It is more easily extended to have features currently found in
290 database and keyword search systems than block allocation based file
291 systems are. The next version will be so extended, and will support
292 plugins consistent with our motto ``It takes more than a license to
293 make source code open.''
294
295 Read <http://www.namesys.com/> to learn more about reiserfs.
296
297 Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
298
299 If you like it, you can pay us to add new features to it that you
300 need, buy a support contract, or pay us to port it to another OS.
301
302config REISERFS_CHECK
303 bool "Enable reiserfs debug mode"
304 depends on REISERFS_FS
305 help
306 If you set this to Y, then ReiserFS will perform every check it can
307 possibly imagine of its internal consistency throughout its
308 operation. It will also go substantially slower. More than once we
309 have forgotten that this was on, and then gone despondent over the
310 latest benchmarks.:-) Use of this option allows our team to go all
311 out in checking for consistency when debugging without fear of its
312 effect on end users. If you are on the verge of sending in a bug
313 report, say Y and you might get a useful error message. Almost
314 everyone should say N.
315
316config REISERFS_PROC_INFO
317 bool "Stats in /proc/fs/reiserfs"
Randy Dunlap880ebdc2007-05-08 00:26:59 -0700318 depends on REISERFS_FS && PROC_FS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 help
320 Create under /proc/fs/reiserfs a hierarchy of files, displaying
321 various ReiserFS statistics and internal data at the expense of
322 making your kernel or module slightly larger (+8 KB). This also
323 increases the amount of kernel memory required for each mount.
324 Almost everyone but ReiserFS developers and people fine-tuning
325 reiserfs or tracing problems should say N.
326
327config REISERFS_FS_XATTR
328 bool "ReiserFS extended attributes"
329 depends on REISERFS_FS
330 help
331 Extended attributes are name:value pairs associated with inodes by
332 the kernel or by users (see the attr(5) manual page, or visit
333 <http://acl.bestbits.at/> for details).
334
335 If unsure, say N.
336
337config REISERFS_FS_POSIX_ACL
338 bool "ReiserFS POSIX Access Control Lists"
339 depends on REISERFS_FS_XATTR
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700340 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 help
342 Posix Access Control Lists (ACLs) support permissions for users and
343 groups beyond the owner/group/world scheme.
344
345 To learn more about Access Control Lists, visit the Posix ACLs for
346 Linux website <http://acl.bestbits.at/>.
347
348 If you don't know what Access Control Lists are, say N
349
350config REISERFS_FS_SECURITY
351 bool "ReiserFS Security Labels"
352 depends on REISERFS_FS_XATTR
353 help
354 Security labels support alternative access control models
355 implemented by security modules like SELinux. This option
356 enables an extended attribute handler for file security
357 labels in the ReiserFS filesystem.
358
359 If you are not using a security module that requires using
360 extended attributes for file security labels, say N.
361
362config JFS_FS
363 tristate "JFS filesystem support"
364 select NLS
365 help
366 This is a port of IBM's Journaled Filesystem . More information is
367 available in the file <file:Documentation/filesystems/jfs.txt>.
368
369 If you do not intend to use the JFS filesystem, say N.
370
371config JFS_POSIX_ACL
372 bool "JFS POSIX Access Control Lists"
373 depends on JFS_FS
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700374 select FS_POSIX_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700375 help
376 Posix Access Control Lists (ACLs) support permissions for users and
377 groups beyond the owner/group/world scheme.
378
379 To learn more about Access Control Lists, visit the Posix ACLs for
380 Linux website <http://acl.bestbits.at/>.
381
382 If you don't know what Access Control Lists are, say N
383
384config JFS_SECURITY
385 bool "JFS Security Labels"
386 depends on JFS_FS
387 help
388 Security labels support alternative access control models
389 implemented by security modules like SELinux. This option
390 enables an extended attribute handler for file security
391 labels in the jfs filesystem.
392
393 If you are not using a security module that requires using
394 extended attributes for file security labels, say N.
395
396config JFS_DEBUG
397 bool "JFS debugging"
398 depends on JFS_FS
399 help
400 If you are experiencing any problems with the JFS filesystem, say
401 Y here. This will result in additional debugging messages to be
402 written to the system log. Under normal circumstances, this
403 results in very little overhead.
404
405config JFS_STATISTICS
406 bool "JFS statistics"
407 depends on JFS_FS
408 help
409 Enabling this option will cause statistics from the JFS file system
410 to be made available to the user in the /proc/fs/jfs/ directory.
411
412config FS_POSIX_ACL
413# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs)
414#
415# NOTE: you can implement Posix ACLs without these helpers (XFS does).
416# Never use this symbol for ifdefs.
417#
418 bool
Andreas Gruenbacherb84c2152005-07-07 17:56:57 -0700419 default n
Linus Torvalds1da177e2005-04-16 15:20:36 -0700420
421source "fs/xfs/Kconfig"
David Teiglandf7825dc2006-01-16 16:43:37 +0000422source "fs/gfs2/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700423
Mark Fashehb4e40a52005-12-15 14:31:24 -0800424config OCFS2_FS
Mark Fasheh02ed8412006-09-14 10:28:06 -0700425 tristate "OCFS2 file system support"
426 depends on NET && SYSFS
Mark Fashehb4e40a52005-12-15 14:31:24 -0800427 select CONFIGFS_FS
428 select JBD
429 select CRC32
Mark Fashehb4e40a52005-12-15 14:31:24 -0800430 help
431 OCFS2 is a general purpose extent based shared disk cluster file
432 system with many similarities to ext3. It supports 64 bit inode
433 numbers, and has automatically extending metadata groups which may
434 also make it attractive for non-clustered use.
435
436 You'll want to install the ocfs2-tools package in order to at least
437 get "mount.ocfs2".
438
439 Project web page: http://oss.oracle.com/projects/ocfs2
440 Tools web page: http://oss.oracle.com/projects/ocfs2-tools
441 OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
442
443 Note: Features which OCFS2 does not support yet:
444 - extended attributes
Mark Fashehb4e40a52005-12-15 14:31:24 -0800445 - quotas
446 - cluster aware flock
447 - Directory change notification (F_NOTIFY)
448 - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
449 - POSIX ACLs
450 - readpages / writepages (not user visible)
451
Joel Becker2b388c62006-05-10 18:28:59 -0700452config OCFS2_DEBUG_MASKLOG
453 bool "OCFS2 logging support"
454 depends on OCFS2_FS
455 default y
456 help
457 The ocfs2 filesystem has an extensive logging system. The system
458 allows selection of events to log via files in /sys/o2cb/logmask/.
459 This option will enlarge your kernel, but it allows debugging of
460 ocfs2 filesystem issues.
461
Jan Kara5a58c3e2007-11-13 19:59:33 +0100462config OCFS2_DEBUG_FS
463 bool "OCFS2 expensive checks"
464 depends on OCFS2_FS
465 default n
466 help
467 This option will enable expensive consistency checks. Enable
468 this option for debugging only as it is likely to decrease
469 performance of the filesystem.
470
Linus Torvalds1da177e2005-04-16 15:20:36 -0700471config MINIX_FS
472 tristate "Minix fs support"
473 help
474 Minix is a simple operating system used in many classes about OS's.
475 The minix file system (method to organize files on a hard disk
476 partition or a floppy disk) was the original file system for Linux,
477 but has been superseded by the second extended file system ext2fs.
478 You don't want to use the minix file system on your hard disk
479 because of certain built-in restrictions, but it is sometimes found
480 on older Linux floppy disks. This option will enlarge your kernel
481 by about 28 KB. If unsure, say N.
482
483 To compile this file system support as a module, choose M here: the
484 module will be called minix. Note that the file system of your root
485 partition (the one containing the directory /) cannot be compiled as
486 a module.
487
488config ROMFS_FS
489 tristate "ROM file system support"
490 ---help---
491 This is a very small read-only file system mainly intended for
492 initial ram disks of installation disks, but it could be used for
493 other read-only media as well. Read
494 <file:Documentation/filesystems/romfs.txt> for details.
495
496 To compile this file system support as a module, choose M here: the
497 module will be called romfs. Note that the file system of your
498 root partition (the one containing the directory /) cannot be a
499 module.
500
501 If you don't know whether you need it, then you don't need it:
502 answer N.
503
David Howells93614012006-09-30 20:45:40 +0200504endif
505
Robert Love0eeca282005-07-12 17:06:03 -0400506config INOTIFY
507 bool "Inotify file change notification support"
508 default y
509 ---help---
Amy Griffis2d9048e2006-06-01 13:10:59 -0700510 Say Y here to enable inotify support. Inotify is a file change
511 notification system and a replacement for dnotify. Inotify fixes
512 numerous shortcomings in dnotify and introduces several new features
513 including multiple file events, one-shot support, and unmount
Robert Love3de11742005-08-04 13:07:08 -0700514 notification.
515
Dirk Hohndele4031492007-10-30 13:37:19 -0700516 For more information, see <file:Documentation/filesystems/inotify.txt>
Robert Love0eeca282005-07-12 17:06:03 -0400517
518 If unsure, say Y.
519
Amy Griffis2d9048e2006-06-01 13:10:59 -0700520config INOTIFY_USER
521 bool "Inotify support for userspace"
522 depends on INOTIFY
523 default y
524 ---help---
525 Say Y here to enable inotify support for userspace, including the
526 associated system calls. Inotify allows monitoring of both files and
527 directories via a single open fd. Events are read from the file
528 descriptor, which is also select()- and poll()-able.
529
Dirk Hohndele4031492007-10-30 13:37:19 -0700530 For more information, see <file:Documentation/filesystems/inotify.txt>
Amy Griffis2d9048e2006-06-01 13:10:59 -0700531
532 If unsure, say Y.
533
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534config QUOTA
535 bool "Quota support"
536 help
537 If you say Y here, you will be able to set per user limits for disk
538 usage (also called disk quotas). Currently, it works for the
539 ext2, ext3, and reiserfs file system. ext3 also supports journalled
540 quotas for which you don't need to run quotacheck(8) after an unclean
Adrian Bunk919532a2005-09-06 15:17:22 -0700541 shutdown.
542 For further details, read the Quota mini-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 <http://www.tldp.org/docs.html#howto>, or the documentation provided
544 with the quota tools. Probably the quota support is only useful for
545 multi user systems. If unsure, say N.
546
Jan Kara8e893462007-10-16 23:29:31 -0700547config QUOTA_NETLINK_INTERFACE
548 bool "Report quota messages through netlink interface"
549 depends on QUOTA && NET
550 help
551 If you say Y here, quota warnings (about exceeding softlimit, reaching
552 hardlimit, etc.) will be reported through netlink interface. If unsure,
553 say Y.
554
555config PRINT_QUOTA_WARNING
556 bool "Print quota warnings to console (OBSOLETE)"
557 depends on QUOTA
558 default y
559 help
560 If you say Y here, quota warnings (about exceeding softlimit, reaching
561 hardlimit, etc.) will be printed to the process' controlling terminal.
562 Note that this behavior is currently deprecated and may go away in
563 future. Please use notification via netlink socket instead.
564
Linus Torvalds1da177e2005-04-16 15:20:36 -0700565config QFMT_V1
566 tristate "Old quota format support"
567 depends on QUOTA
568 help
569 This quota format was (is) used by kernels earlier than 2.4.22. If
570 you have quota working and you don't want to convert to new quota
571 format say Y here.
572
573config QFMT_V2
574 tristate "Quota format v2 support"
575 depends on QUOTA
576 help
577 This quota format allows using quotas with 32-bit UIDs/GIDs. If you
Adrian Bunk919532a2005-09-06 15:17:22 -0700578 need this functionality say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579
580config QUOTACTL
581 bool
582 depends on XFS_QUOTA || QUOTA
583 default y
584
585config DNOTIFY
Adrian Bunk7e341fa2007-10-16 23:27:17 -0700586 bool "Dnotify support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700587 default y
588 help
589 Dnotify is a directory-based per-fd file change notification system
590 that uses signals to communicate events to user-space. There exist
591 superior alternatives, but some applications may still rely on
592 dnotify.
593
Adrian Bunk7e341fa2007-10-16 23:27:17 -0700594 If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595
596config AUTOFS_FS
597 tristate "Kernel automounter support"
598 help
599 The automounter is a tool to automatically mount remote file systems
600 on demand. This implementation is partially kernel-based to reduce
601 overhead in the already-mounted case; this is unlike the BSD
602 automounter (amd), which is a pure user space daemon.
603
604 To use the automounter you need the user-space tools from the autofs
605 package; you can find the location in <file:Documentation/Changes>.
606 You also want to answer Y to "NFS file system support", below.
607
608 If you want to use the newer version of the automounter with more
609 features, say N here and say Y to "Kernel automounter v4 support",
610 below.
611
612 To compile this support as a module, choose M here: the module will be
613 called autofs.
614
615 If you are not a part of a fairly large, distributed network, you
616 probably do not need an automounter, and can say N here.
617
618config AUTOFS4_FS
619 tristate "Kernel automounter version 4 support (also supports v3)"
620 help
621 The automounter is a tool to automatically mount remote file systems
622 on demand. This implementation is partially kernel-based to reduce
623 overhead in the already-mounted case; this is unlike the BSD
624 automounter (amd), which is a pure user space daemon.
625
626 To use the automounter you need the user-space tools from
627 <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
628 want to answer Y to "NFS file system support", below.
629
630 To compile this support as a module, choose M here: the module will be
631 called autofs4. You will need to add "alias autofs autofs4" to your
632 modules configuration file.
633
634 If you are not a part of a fairly large, distributed network or
635 don't have a laptop which needs to dynamically reconfigure to the
636 local network, you probably do not need an automounter, and can say
637 N here.
638
Miklos Szeredi04578f12005-09-09 13:10:22 -0700639config FUSE_FS
640 tristate "Filesystem in Userspace support"
641 help
642 With FUSE it is possible to implement a fully functional filesystem
643 in a userspace program.
644
645 There's also companion library: libfuse. This library along with
646 utilities is available from the FUSE homepage:
647 <http://fuse.sourceforge.net/>
648
Miklos Szeredi909021e2005-09-27 21:45:20 -0700649 See <file:Documentation/filesystems/fuse.txt> for more information.
650 See <file:Documentation/Changes> for needed library/utility version.
651
Miklos Szeredi04578f12005-09-09 13:10:22 -0700652 If you want to develop a userspace FS, or if you want to use
653 a filesystem based on FUSE, answer Y or M.
654
Randy Dunlapf2fbc6c2006-10-19 23:28:35 -0700655config GENERIC_ACL
656 bool
657 select FS_POSIX_ACL
658
David Howells93614012006-09-30 20:45:40 +0200659if BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660menu "CD-ROM/DVD Filesystems"
661
662config ISO9660_FS
663 tristate "ISO 9660 CDROM file system support"
664 help
665 This is the standard file system used on CD-ROMs. It was previously
666 known as "High Sierra File System" and is called "hsfs" on other
667 Unix systems. The so-called Rock-Ridge extensions which allow for
668 long Unix filenames and symbolic links are also supported by this
669 driver. If you have a CD-ROM drive and want to do more with it than
670 just listen to audio CDs and watch its LEDs, say Y (and read
671 <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
672 available from <http://www.tldp.org/docs.html#howto>), thereby
673 enlarging your kernel by about 27 KB; otherwise say N.
674
675 To compile this file system support as a module, choose M here: the
676 module will be called isofs.
677
678config JOLIET
679 bool "Microsoft Joliet CDROM extensions"
680 depends on ISO9660_FS
681 select NLS
682 help
683 Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
684 which allows for long filenames in unicode format (unicode is the
685 new 16 bit character code, successor to ASCII, which encodes the
686 characters of almost all languages of the world; see
687 <http://www.unicode.org/> for more information). Say Y here if you
688 want to be able to read Joliet CD-ROMs under Linux.
689
690config ZISOFS
691 bool "Transparent decompression extension"
692 depends on ISO9660_FS
693 select ZLIB_INFLATE
694 help
695 This is a Linux-specific extension to RockRidge which lets you store
696 data in compressed form on a CD-ROM and have it transparently
697 decompressed when the CD-ROM is accessed. See
698 <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
699 necessary to create such a filesystem. Say Y here if you want to be
700 able to read such compressed CD-ROMs.
701
Linus Torvalds1da177e2005-04-16 15:20:36 -0700702config UDF_FS
703 tristate "UDF file system support"
704 help
705 This is the new file system used on some CD-ROMs and DVDs. Say Y if
706 you intend to mount DVD discs or CDRW's written in packet mode, or
707 if written to by other UDF utilities, such as DirectCD.
708 Please read <file:Documentation/filesystems/udf.txt>.
709
710 To compile this file system support as a module, choose M here: the
711 module will be called udf.
712
713 If unsure, say N.
714
715config UDF_NLS
716 bool
717 default y
718 depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
719
720endmenu
David Howells93614012006-09-30 20:45:40 +0200721endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700722
David Howells93614012006-09-30 20:45:40 +0200723if BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724menu "DOS/FAT/NT Filesystems"
725
726config FAT_FS
727 tristate
728 select NLS
729 help
730 If you want to use one of the FAT-based file systems (the MS-DOS and
731 VFAT (Windows 95) file systems), then you must say Y or M here
732 to include FAT support. You will then be able to mount partitions or
733 diskettes with FAT-based file systems and transparently access the
734 files on them, i.e. MSDOS files will look and behave just like all
735 other Unix files.
736
737 This FAT support is not a file system in itself, it only provides
738 the foundation for the other file systems. You will have to say Y or
739 M to at least one of "MSDOS fs support" or "VFAT fs support" in
740 order to make use of it.
741
742 Another way to read and write MSDOS floppies and hard drive
743 partitions from within Linux (but not transparently) is with the
744 mtools ("man mtools") program suite. You don't need to say Y here in
745 order to do that.
746
747 If you need to move large files on floppies between a DOS and a
748 Linux box, say Y here, mount the floppy under Linux with an MSDOS
749 file system and use GNU tar's M option. GNU tar is a program
750 available for Unix and DOS ("man tar" or "info tar").
751
Linus Torvalds1da177e2005-04-16 15:20:36 -0700752 The FAT support will enlarge your kernel by about 37 KB. If unsure,
753 say Y.
754
755 To compile this as a module, choose M here: the module will be called
756 fat. Note that if you compile the FAT support as a module, you
757 cannot compile any of the FAT-based file systems into the kernel
758 -- they will have to be modules as well.
759
760config MSDOS_FS
761 tristate "MSDOS fs support"
762 select FAT_FS
763 help
764 This allows you to mount MSDOS partitions of your hard drive (unless
765 they are compressed; to access compressed MSDOS partitions under
766 Linux, you can either use the DOS emulator DOSEMU, described in the
767 DOSEMU-HOWTO, available from
768 <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
769 <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
770 intend to use dosemu with a non-compressed MSDOS partition, say Y
771 here) and MSDOS floppies. This means that file access becomes
772 transparent, i.e. the MSDOS files look and behave just like all
773 other Unix files.
774
775 If you have Windows 95 or Windows NT installed on your MSDOS
776 partitions, you should use the VFAT file system (say Y to "VFAT fs
777 support" below), or you will not be able to see the long filenames
778 generated by Windows 95 / Windows NT.
779
780 This option will enlarge your kernel by about 7 KB. If unsure,
781 answer Y. This will only work if you said Y to "DOS FAT fs support"
782 as well. To compile this as a module, choose M here: the module will
783 be called msdos.
784
785config VFAT_FS
786 tristate "VFAT (Windows-95) fs support"
787 select FAT_FS
788 help
789 This option provides support for normal Windows file systems with
790 long filenames. That includes non-compressed FAT-based file systems
791 used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
792 programs from the mtools package.
793
794 The VFAT support enlarges your kernel by about 10 KB and it only
795 works if you said Y to the "DOS FAT fs support" above. Please read
796 the file <file:Documentation/filesystems/vfat.txt> for details. If
797 unsure, say Y.
798
799 To compile this as a module, choose M here: the module will be called
800 vfat.
801
802config FAT_DEFAULT_CODEPAGE
803 int "Default codepage for FAT"
804 depends on MSDOS_FS || VFAT_FS
805 default 437
806 help
807 This option should be set to the codepage of your FAT filesystems.
808 It can be overridden with the "codepage" mount option.
809 See <file:Documentation/filesystems/vfat.txt> for more information.
810
811config FAT_DEFAULT_IOCHARSET
812 string "Default iocharset for FAT"
813 depends on VFAT_FS
814 default "iso8859-1"
815 help
816 Set this to the default input/output character set you'd
817 like FAT to use. It should probably match the character set
818 that most of your FAT filesystems use, and can be overridden
819 with the "iocharset" mount option for FAT filesystems.
820 Note that "utf8" is not recommended for FAT filesystems.
821 If unsure, you shouldn't set "utf8" here.
822 See <file:Documentation/filesystems/vfat.txt> for more information.
823
824config NTFS_FS
825 tristate "NTFS file system support"
826 select NLS
827 help
828 NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
829
830 Saying Y or M here enables read support. There is partial, but
831 safe, write support available. For write support you must also
832 say Y to "NTFS write support" below.
833
834 There are also a number of user-space tools available, called
835 ntfsprogs. These include ntfsundelete and ntfsresize, that work
836 without NTFS support enabled in the kernel.
837
838 This is a rewrite from scratch of Linux NTFS support and replaced
839 the old NTFS code starting with Linux 2.5.11. A backport to
840 the Linux 2.4 kernel series is separately available as a patch
841 from the project web site.
842
843 For more information see <file:Documentation/filesystems/ntfs.txt>
844 and <http://linux-ntfs.sourceforge.net/>.
845
846 To compile this file system support as a module, choose M here: the
847 module will be called ntfs.
848
849 If you are not using Windows NT, 2000, XP or 2003 in addition to
850 Linux on your computer it is safe to say N.
851
852config NTFS_DEBUG
853 bool "NTFS debugging support"
854 depends on NTFS_FS
855 help
856 If you are experiencing any problems with the NTFS file system, say
857 Y here. This will result in additional consistency checks to be
858 performed by the driver as well as additional debugging messages to
859 be written to the system log. Note that debugging messages are
860 disabled by default. To enable them, supply the option debug_msgs=1
861 at the kernel command line when booting the kernel or as an option
862 to insmod when loading the ntfs module. Once the driver is active,
863 you can enable debugging messages by doing (as root):
864 echo 1 > /proc/sys/fs/ntfs-debug
865 Replacing the "1" with "0" would disable debug messages.
866
867 If you leave debugging messages disabled, this results in little
868 overhead, but enabling debug messages results in very significant
869 slowdown of the system.
870
871 When reporting bugs, please try to have available a full dump of
872 debugging messages while the misbehaviour was occurring.
873
874config NTFS_RW
875 bool "NTFS write support"
876 depends on NTFS_FS
877 help
878 This enables the partial, but safe, write support in the NTFS driver.
879
880 The only supported operation is overwriting existing files, without
881 changing the file length. No file or directory creation, deletion or
882 renaming is possible. Note only non-resident files can be written to
883 so you may find that some very small files (<500 bytes or so) cannot
884 be written to.
885
886 While we cannot guarantee that it will not damage any data, we have
887 so far not received a single report where the driver would have
888 damaged someones data so we assume it is perfectly safe to use.
889
890 Note: While write support is safe in this version (a rewrite from
891 scratch of the NTFS support), it should be noted that the old NTFS
892 write support, included in Linux 2.5.10 and before (since 1997),
893 is not safe.
894
895 This is currently useful with TopologiLinux. TopologiLinux is run
896 on top of any DOS/Microsoft Windows system without partitioning your
897 hard disk. Unlike other Linux distributions TopologiLinux does not
898 need its own partition. For more information see
899 <http://topologi-linux.sourceforge.net/>
900
901 It is perfectly safe to say N here.
902
903endmenu
David Howells93614012006-09-30 20:45:40 +0200904endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700905
906menu "Pseudo filesystems"
907
908config PROC_FS
H. Peter Anvin69755652006-06-25 05:48:08 -0700909 bool "/proc file system support" if EMBEDDED
910 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700911 help
912 This is a virtual file system providing information about the status
913 of the system. "Virtual" means that it doesn't take up any space on
914 your hard disk: the files are created on the fly by the kernel when
915 you try to access them. Also, you cannot read the files with older
916 version of the program less: you need to use more or cat.
917
918 It's totally cool; for example, "cat /proc/interrupts" gives
919 information about what the different IRQs are used for at the moment
920 (there is a small number of Interrupt ReQuest lines in your computer
921 that are used by the attached devices to gain the CPU's attention --
922 often a source of trouble if two devices are mistakenly configured
923 to use the same IRQ). The program procinfo to display some
924 information about your system gathered from the /proc file system.
925
926 Before you can use the /proc file system, it has to be mounted,
927 meaning it has to be given a location in the directory hierarchy.
928 That location should be /proc. A command such as "mount -t proc proc
929 /proc" or the equivalent line in /etc/fstab does the job.
930
931 The /proc file system is explained in the file
932 <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
933 ("man 5 proc").
934
935 This option will enlarge your kernel by about 67 KB. Several
936 programs depend on this, so everyone should say Y here.
937
938config PROC_KCORE
939 bool "/proc/kcore support" if !ARM
940 depends on PROC_FS && MMU
941
Vivek Goyal666bfdd2005-06-25 14:58:21 -0700942config PROC_VMCORE
943 bool "/proc/vmcore support (EXPERIMENTAL)"
Maneesh Soni05970d42006-01-09 20:51:52 -0800944 depends on PROC_FS && EXPERIMENTAL && CRASH_DUMP
Vivek Goyal68250ba2006-04-10 22:54:30 -0700945 default y
Vivek Goyal666bfdd2005-06-25 14:58:21 -0700946 help
947 Exports the dump image of crashed kernel in ELF format.
948
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700949config PROC_SYSCTL
950 bool "Sysctl support (/proc/sys)" if EMBEDDED
951 depends on PROC_FS
952 select SYSCTL
953 default y
954 ---help---
955 The sysctl interface provides a means of dynamically changing
956 certain kernel parameters and variables on the fly without requiring
957 a recompile of the kernel or reboot of the system. The primary
958 interface is through /proc/sys. If you say Y here a tree of
959 modifiable sysctl entries will be generated beneath the
960 /proc/sys directory. They are explained in the files
961 in <file:Documentation/sysctl/>. Note that enabling this
962 option will enlarge the kernel by at least 8 KB.
963
964 As it is generally a good thing, you should say Y here unless
965 building a kernel for install/rescue disks or your system is very
966 limited in memory.
967
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968config SYSFS
969 bool "sysfs file system support" if EMBEDDED
970 default y
971 help
972 The sysfs filesystem is a virtual filesystem that the kernel uses to
973 export internal kernel objects, their attributes, and their
974 relationships to one another.
975
976 Users can use sysfs to ascertain useful information about the running
977 kernel, such as the devices the kernel has discovered on each bus and
978 which driver each is bound to. sysfs can also be used to tune devices
979 and other kernel subsystems.
980
981 Some system agents rely on the information in sysfs to operate.
982 /sbin/hotplug uses device and object attributes in sysfs to assist in
Jan Engelhardt03a67a42006-11-30 05:32:19 +0100983 delegating policy decisions, like persistently naming devices.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700984
985 sysfs is currently used by the block subsystem to mount the root
986 partition. If sysfs is disabled you must specify the boot device on
987 the kernel boot command line via its major and minor numbers. For
988 example, "root=03:01" for /dev/hda1.
989
990 Designers of embedded systems may wish to say N here to conserve space.
991
Linus Torvalds1da177e2005-04-16 15:20:36 -0700992config TMPFS
993 bool "Virtual memory file system support (former shm fs)"
994 help
995 Tmpfs is a file system which keeps all files in virtual memory.
996
997 Everything in tmpfs is temporary in the sense that no files will be
998 created on your hard drive. The files live in memory and swap
999 space. If you unmount a tmpfs instance, everything stored therein is
1000 lost.
1001
1002 See <file:Documentation/filesystems/tmpfs.txt> for details.
1003
Andreas Gruenbacher39f02472006-09-29 02:01:35 -07001004config TMPFS_POSIX_ACL
1005 bool "Tmpfs POSIX Access Control Lists"
1006 depends on TMPFS
1007 select GENERIC_ACL
1008 help
1009 POSIX Access Control Lists (ACLs) support permissions for users and
1010 groups beyond the owner/group/world scheme.
1011
1012 To learn more about Access Control Lists, visit the POSIX ACLs for
1013 Linux website <http://acl.bestbits.at/>.
1014
1015 If you don't know what Access Control Lists are, say N.
1016
Linus Torvalds1da177e2005-04-16 15:20:36 -07001017config HUGETLBFS
1018 bool "HugeTLB file system support"
Paul Mundtdd950582007-06-11 15:35:34 +09001019 depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || BROKEN
Arthur Othienodda27d12006-04-18 22:20:57 -07001020 help
1021 hugetlbfs is a filesystem backing for HugeTLB pages, based on
1022 ramfs. For architectures that support it, say Y here and read
1023 <file:Documentation/vm/hugetlbpage.txt> for details.
1024
1025 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001026
1027config HUGETLB_PAGE
1028 def_bool HUGETLBFS
1029
Joel Becker7063fbf2005-12-15 14:29:43 -08001030config CONFIGFS_FS
1031 tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
Adrian Bunk65714b92006-03-26 14:25:52 +02001032 depends on SYSFS && EXPERIMENTAL
Joel Becker7063fbf2005-12-15 14:29:43 -08001033 help
1034 configfs is a ram-based filesystem that provides the converse
1035 of sysfs's functionality. Where sysfs is a filesystem-based
1036 view of kernel objects, configfs is a filesystem-based manager
1037 of kernel objects, or config_items.
1038
1039 Both sysfs and configfs can and should exist together on the
1040 same system. One is not a replacement for the other.
1041
Linus Torvalds1da177e2005-04-16 15:20:36 -07001042endmenu
1043
1044menu "Miscellaneous filesystems"
1045
1046config ADFS_FS
1047 tristate "ADFS file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001048 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 help
1050 The Acorn Disc Filing System is the standard file system of the
1051 RiscOS operating system which runs on Acorn's ARM-based Risc PC
1052 systems and the Acorn Archimedes range of machines. If you say Y
1053 here, Linux will be able to read from ADFS partitions on hard drives
1054 and from ADFS-formatted floppy discs. If you also want to be able to
1055 write to those devices, say Y to "ADFS write support" below.
1056
1057 The ADFS partition should be the first partition (i.e.,
1058 /dev/[hs]d?1) on each of your drives. Please read the file
1059 <file:Documentation/filesystems/adfs.txt> for further details.
1060
1061 To compile this code as a module, choose M here: the module will be
1062 called adfs.
1063
1064 If unsure, say N.
1065
1066config ADFS_FS_RW
1067 bool "ADFS write support (DANGEROUS)"
1068 depends on ADFS_FS
1069 help
1070 If you say Y here, you will be able to write to ADFS partitions on
1071 hard drives and ADFS-formatted floppy disks. This is experimental
1072 codes, so if you're unsure, say N.
1073
1074config AFFS_FS
1075 tristate "Amiga FFS file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001076 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001077 help
1078 The Fast File System (FFS) is the common file system used on hard
1079 disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
1080 if you want to be able to read and write files from and to an Amiga
1081 FFS partition on your hard drive. Amiga floppies however cannot be
1082 read with this driver due to an incompatibility of the floppy
1083 controller used in an Amiga and the standard floppy controller in
1084 PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
1085 and <file:fs/affs/Changes>.
1086
1087 With this driver you can also mount disk files used by Bernd
1088 Schmidt's Un*X Amiga Emulator
1089 (<http://www.freiburg.linux.de/~uae/>).
1090 If you want to do this, you will also need to say Y or M to "Loop
1091 device support", above.
1092
1093 To compile this file system support as a module, choose M here: the
1094 module will be called affs. If unsure, say N.
1095
Michael Halcrow237fead2006-10-04 02:16:22 -07001096config ECRYPT_FS
1097 tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
Michael Halcrow88b4a072007-02-12 00:53:43 -08001098 depends on EXPERIMENTAL && KEYS && CRYPTO && NET
Michael Halcrow237fead2006-10-04 02:16:22 -07001099 help
1100 Encrypted filesystem that operates on the VFS layer. See
Dirk Hohndele4031492007-10-30 13:37:19 -07001101 <file:Documentation/filesystems/ecryptfs.txt> to learn more about
Michael Halcrow237fead2006-10-04 02:16:22 -07001102 eCryptfs. Userspace components are required and can be
1103 obtained from <http://ecryptfs.sf.net>.
1104
1105 To compile this file system support as a module, choose M here: the
1106 module will be called ecryptfs.
1107
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108config HFS_FS
1109 tristate "Apple Macintosh file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001110 depends on BLOCK && EXPERIMENTAL
Lennert Buytenhek878129a2005-11-07 00:59:18 -08001111 select NLS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001112 help
1113 If you say Y here, you will be able to mount Macintosh-formatted
1114 floppy disks and hard drive partitions with full read-write access.
1115 Please read <file:fs/hfs/HFS.txt> to learn about the available mount
1116 options.
1117
1118 To compile this file system support as a module, choose M here: the
1119 module will be called hfs.
1120
1121config HFSPLUS_FS
1122 tristate "Apple Extended HFS file system support"
David Howells93614012006-09-30 20:45:40 +02001123 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001124 select NLS
1125 select NLS_UTF8
1126 help
1127 If you say Y here, you will be able to mount extended format
1128 Macintosh-formatted hard drive partitions with full read-write access.
1129
1130 This file system is often called HFS+ and was introduced with
1131 MacOS 8. It includes all Mac specific filesystem data such as
1132 data forks and creator codes, but it also has several UNIX
1133 style features such as file ownership and permissions.
1134
1135config BEFS_FS
1136 tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001137 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001138 select NLS
1139 help
1140 The BeOS File System (BeFS) is the native file system of Be, Inc's
1141 BeOS. Notable features include support for arbitrary attributes
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +01001142 on files and directories, and database-like indices on selected
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143 attributes. (Also note that this driver doesn't make those features
1144 available at this time). It is a 64 bit filesystem, so it supports
Matt LaPlante44c09202006-10-03 22:34:14 +02001145 extremely large volumes and files.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146
1147 If you use this filesystem, you should also say Y to at least one
1148 of the NLS (native language support) options below.
1149
1150 If you don't know what this is about, say N.
1151
1152 To compile this as a module, choose M here: the module will be
1153 called befs.
1154
1155config BEFS_DEBUG
1156 bool "Debug BeFS"
1157 depends on BEFS_FS
1158 help
1159 If you say Y here, you can use the 'debug' mount option to enable
1160 debugging output from the driver.
1161
1162config BFS_FS
1163 tristate "BFS file system support (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001164 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001165 help
1166 Boot File System (BFS) is a file system used under SCO UnixWare to
1167 allow the bootloader access to the kernel image and other important
1168 files during the boot process. It is usually mounted under /stand
1169 and corresponds to the slice marked as "STAND" in the UnixWare
1170 partition. You should say Y if you want to read or write the files
1171 on your /stand slice from within Linux. You then also need to say Y
1172 to "UnixWare slices support", below. More information about the BFS
1173 file system is contained in the file
1174 <file:Documentation/filesystems/bfs.txt>.
1175
1176 If you don't know what this is about, say N.
1177
1178 To compile this as a module, choose M here: the module will be called
1179 bfs. Note that the file system of your root partition (the one
1180 containing the directory /) cannot be compiled as a module.
1181
1182
1183
1184config EFS_FS
1185 tristate "EFS file system support (read only) (EXPERIMENTAL)"
David Howells93614012006-09-30 20:45:40 +02001186 depends on BLOCK && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001187 help
1188 EFS is an older file system used for non-ISO9660 CD-ROMs and hard
1189 disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
1190 uses the XFS file system for hard disk partitions however).
1191
1192 This implementation only offers read-only access. If you don't know
1193 what all this is about, it's safe to say N. For more information
1194 about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
1195
1196 To compile the EFS file system support as a module, choose M here: the
1197 module will be called efs.
1198
Linus Torvalds1da177e2005-04-16 15:20:36 -07001199config JFFS2_FS
1200 tristate "Journalling Flash File System v2 (JFFS2) support"
1201 select CRC32
1202 depends on MTD
1203 help
1204 JFFS2 is the second generation of the Journalling Flash File System
1205 for use on diskless embedded devices. It provides improved wear
1206 levelling, compression and support for hard links. You cannot use
1207 this on normal block devices, only on 'MTD' devices.
1208
1209 Further information on the design and implementation of JFFS2 is
1210 available at <http://sources.redhat.com/jffs2/>.
1211
1212config JFFS2_FS_DEBUG
1213 int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
1214 depends on JFFS2_FS
1215 default "0"
1216 help
1217 This controls the amount of debugging messages produced by the JFFS2
1218 code. Set it to zero for use in production systems. For evaluation,
1219 testing and debugging, it's advisable to set it to one. This will
1220 enable a few assertions and will print debugging messages at the
1221 KERN_DEBUG loglevel, where they won't normally be visible. Level 2
1222 is unlikely to be useful - it enables extra debugging in certain
1223 areas which at one point needed debugging, but when the bugs were
1224 located and fixed, the detailed messages were relegated to level 2.
1225
1226 If reporting bugs, please try to have available a full dump of the
1227 messages at debug level 1 while the misbehaviour was occurring.
1228
David Woodhouse2ba72cb2006-06-18 10:22:40 +01001229config JFFS2_FS_WRITEBUFFER
1230 bool "JFFS2 write-buffering support"
KaiGai Koheiaa98d7c2006-05-13 15:09:47 +09001231 depends on JFFS2_FS
David Woodhouse2ba72cb2006-06-18 10:22:40 +01001232 default y
1233 help
1234 This enables the write-buffering support in JFFS2.
1235
1236 This functionality is required to support JFFS2 on the following
1237 types of flash devices:
1238 - NAND flash
1239 - NOR flash with transparent ECC
1240 - DataFlash
1241
David Woodhousea6bc4322007-07-11 14:23:54 +01001242config JFFS2_FS_WBUF_VERIFY
1243 bool "Verify JFFS2 write-buffer reads"
1244 depends on JFFS2_FS_WRITEBUFFER
1245 default n
1246 help
1247 This causes JFFS2 to read back every page written through the
1248 write-buffer, and check for errors.
1249
David Woodhouse2ba72cb2006-06-18 10:22:40 +01001250config JFFS2_SUMMARY
1251 bool "JFFS2 summary support (EXPERIMENTAL)"
1252 depends on JFFS2_FS && EXPERIMENTAL
1253 default n
1254 help
1255 This feature makes it possible to use summary information
1256 for faster filesystem mount.
1257
1258 The summary information can be inserted into a filesystem image
1259 by the utility 'sumtool'.
1260
1261 If unsure, say 'N'.
1262
1263config JFFS2_FS_XATTR
1264 bool "JFFS2 XATTR support (EXPERIMENTAL)"
KaiGai Kohei04510de2006-06-24 09:21:13 +09001265 depends on JFFS2_FS && EXPERIMENTAL
KaiGai Koheiaa98d7c2006-05-13 15:09:47 +09001266 default n
1267 help
1268 Extended attributes are name:value pairs associated with inodes by
1269 the kernel or by users (see the attr(5) manual page, or visit
1270 <http://acl.bestbits.at/> for details).
1271
1272 If unsure, say N.
1273
1274config JFFS2_FS_POSIX_ACL
1275 bool "JFFS2 POSIX Access Control Lists"
1276 depends on JFFS2_FS_XATTR
1277 default y
1278 select FS_POSIX_ACL
1279 help
1280 Posix Access Control Lists (ACLs) support permissions for users and
1281 groups beyond the owner/group/world scheme.
1282
1283 To learn more about Access Control Lists, visit the Posix ACLs for
1284 Linux website <http://acl.bestbits.at/>.
1285
1286 If you don't know what Access Control Lists are, say N
1287
1288config JFFS2_FS_SECURITY
1289 bool "JFFS2 Security Labels"
1290 depends on JFFS2_FS_XATTR
1291 default y
1292 help
1293 Security labels support alternative access control models
1294 implemented by security modules like SELinux. This option
1295 enables an extended attribute handler for file security
1296 labels in the jffs2 filesystem.
1297
1298 If you are not using a security module that requires using
1299 extended attributes for file security labels, say N.
1300
Linus Torvalds1da177e2005-04-16 15:20:36 -07001301config JFFS2_COMPRESSION_OPTIONS
1302 bool "Advanced compression options for JFFS2"
1303 depends on JFFS2_FS
1304 default n
1305 help
1306 Enabling this option allows you to explicitly choose which
1307 compression modules, if any, are enabled in JFFS2. Removing
1308 compressors and mean you cannot read existing file systems,
1309 and enabling experimental compressors can mean that you
1310 write a file system which cannot be read by a standard kernel.
1311
1312 If unsure, you should _definitely_ say 'N'.
1313
1314config JFFS2_ZLIB
1315 bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
1316 select ZLIB_INFLATE
1317 select ZLIB_DEFLATE
1318 depends on JFFS2_FS
1319 default y
David Woodhouseef53cb02007-07-10 10:01:22 +01001320 help
1321 Zlib is designed to be a free, general-purpose, legally unencumbered,
1322 lossless data-compression library for use on virtually any computer
1323 hardware and operating system. See <http://www.gzip.org/zlib/> for
1324 further information.
Thomas Gleixner182ec4e2005-11-07 11:16:07 +00001325
David Woodhouseef53cb02007-07-10 10:01:22 +01001326 Say 'Y' if unsure.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001327
Richard Purdiec799aca2007-07-10 10:28:36 +01001328config JFFS2_LZO
1329 bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
1330 select LZO_COMPRESS
1331 select LZO_DECOMPRESS
1332 depends on JFFS2_FS
David Woodhouse3ca135e2007-08-02 16:32:02 +01001333 default n
Richard Purdiec799aca2007-07-10 10:28:36 +01001334 help
1335 minilzo-based compression. Generally works better than Zlib.
1336
David Woodhouse3ca135e2007-08-02 16:32:02 +01001337 This feature was added in July, 2007. Say 'N' if you need
1338 compatibility with older bootloaders or kernels.
Richard Purdiec799aca2007-07-10 10:28:36 +01001339
Linus Torvalds1da177e2005-04-16 15:20:36 -07001340config JFFS2_RTIME
1341 bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
1342 depends on JFFS2_FS
1343 default y
David Woodhouseef53cb02007-07-10 10:01:22 +01001344 help
1345 Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001346
1347config JFFS2_RUBIN
1348 bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
1349 depends on JFFS2_FS
1350 default n
David Woodhouseef53cb02007-07-10 10:01:22 +01001351 help
1352 RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001353
1354choice
David Woodhouseef53cb02007-07-10 10:01:22 +01001355 prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
1356 default JFFS2_CMODE_PRIORITY
1357 depends on JFFS2_FS
1358 help
1359 You can set here the default compression mode of JFFS2 from
1360 the available compression modes. Don't touch if unsure.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001361
1362config JFFS2_CMODE_NONE
David Woodhouseef53cb02007-07-10 10:01:22 +01001363 bool "no compression"
1364 help
1365 Uses no compression.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001366
1367config JFFS2_CMODE_PRIORITY
David Woodhouseef53cb02007-07-10 10:01:22 +01001368 bool "priority"
1369 help
1370 Tries the compressors in a predefined order and chooses the first
1371 successful one.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001372
1373config JFFS2_CMODE_SIZE
David Woodhouseef53cb02007-07-10 10:01:22 +01001374 bool "size (EXPERIMENTAL)"
1375 help
1376 Tries all compressors and chooses the one which has the smallest
1377 result.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001378
Richard Purdie3b23c1f2007-07-10 10:28:42 +01001379config JFFS2_CMODE_FAVOURLZO
1380 bool "Favour LZO"
1381 help
1382 Tries all compressors and chooses the one which has the smallest
1383 result but gives some preference to LZO (which has faster
1384 decompression) at the expense of size.
1385
Linus Torvalds1da177e2005-04-16 15:20:36 -07001386endchoice
1387
1388config CRAMFS
1389 tristate "Compressed ROM file system support (cramfs)"
David Howells93614012006-09-30 20:45:40 +02001390 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001391 select ZLIB_INFLATE
1392 help
1393 Saying Y here includes support for CramFs (Compressed ROM File
1394 System). CramFs is designed to be a simple, small, and compressed
1395 file system for ROM based embedded systems. CramFs is read-only,
1396 limited to 256MB file systems (with 16MB files), and doesn't support
1397 16/32 bits uid/gid, hard links and timestamps.
1398
1399 See <file:Documentation/filesystems/cramfs.txt> and
1400 <file:fs/cramfs/README> for further information.
1401
1402 To compile this as a module, choose M here: the module will be called
1403 cramfs. Note that the root file system (the one containing the
1404 directory /) cannot be compiled as a module.
1405
1406 If unsure, say N.
1407
1408config VXFS_FS
1409 tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
David Howells93614012006-09-30 20:45:40 +02001410 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001411 help
1412 FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
1413 file system format. VERITAS VxFS(TM) is the standard file system
1414 of SCO UnixWare (and possibly others) and optionally available
1415 for Sunsoft Solaris, HP-UX and many other operating systems.
1416 Currently only readonly access is supported.
1417
1418 NOTE: the file system type as used by mount(1), mount(2) and
1419 fstab(5) is 'vxfs' as it describes the file system format, not
1420 the actual driver.
1421
1422 To compile this as a module, choose M here: the module will be
1423 called freevxfs. If unsure, say N.
1424
1425
1426config HPFS_FS
1427 tristate "OS/2 HPFS file system support"
David Howells93614012006-09-30 20:45:40 +02001428 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001429 help
1430 OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
1431 is the file system used for organizing files on OS/2 hard disk
1432 partitions. Say Y if you want to be able to read files from and
1433 write files to an OS/2 HPFS partition on your hard drive. OS/2
1434 floppies however are in regular MSDOS format, so you don't need this
1435 option in order to be able to read them. Read
1436 <file:Documentation/filesystems/hpfs.txt>.
1437
1438 To compile this file system support as a module, choose M here: the
1439 module will be called hpfs. If unsure, say N.
1440
1441
1442
1443config QNX4FS_FS
1444 tristate "QNX4 file system support (read only)"
David Howells93614012006-09-30 20:45:40 +02001445 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001446 help
1447 This is the file system used by the real-time operating systems
1448 QNX 4 and QNX 6 (the latter is also called QNX RTP).
1449 Further information is available at <http://www.qnx.com/>.
1450 Say Y if you intend to mount QNX hard disks or floppies.
1451 Unless you say Y to "QNX4FS read-write support" below, you will
1452 only be able to read these file systems.
1453
1454 To compile this file system support as a module, choose M here: the
1455 module will be called qnx4.
1456
1457 If you don't know whether you need it, then you don't need it:
1458 answer N.
1459
1460config QNX4FS_RW
1461 bool "QNX4FS write support (DANGEROUS)"
1462 depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
1463 help
1464 Say Y if you want to test write support for QNX4 file systems.
1465
1466 It's currently broken, so for now:
1467 answer N.
1468
1469
1470
1471config SYSV_FS
1472 tristate "System V/Xenix/V7/Coherent file system support"
David Howells93614012006-09-30 20:45:40 +02001473 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001474 help
1475 SCO, Xenix and Coherent are commercial Unix systems for Intel
1476 machines, and Version 7 was used on the DEC PDP-11. Saying Y
1477 here would allow you to read from their floppies and hard disk
1478 partitions.
1479
1480 If you have floppies or hard disk partitions like that, it is likely
1481 that they contain binaries from those other Unix systems; in order
Matt LaPlantecab00892006-10-03 22:36:44 +02001482 to run these binaries, you will want to install linux-abi which is
Linus Torvalds1da177e2005-04-16 15:20:36 -07001483 a set of kernel modules that lets you run SCO, Xenix, Wyse,
1484 UnixWare, Dell Unix and System V programs under Linux. It is
1485 available via FTP (user: ftp) from
1486 <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
1487 NOTE: that will work only for binaries from Intel-based systems;
1488 PDP ones will have to wait until somebody ports Linux to -11 ;-)
1489
1490 If you only intend to mount files from some other Unix over the
1491 network using NFS, you don't need the System V file system support
1492 (but you need NFS file system support obviously).
1493
1494 Note that this option is generally not needed for floppies, since a
1495 good portable way to transport files and directories between unixes
1496 (and even other operating systems) is given by the tar program ("man
1497 tar" or preferably "info tar"). Note also that this option has
1498 nothing whatsoever to do with the option "System V IPC". Read about
1499 the System V file system in
1500 <file:Documentation/filesystems/sysv-fs.txt>.
1501 Saying Y here will enlarge your kernel by about 27 KB.
1502
1503 To compile this as a module, choose M here: the module will be called
1504 sysv.
1505
1506 If you haven't heard about all of this before, it's safe to say N.
1507
1508
1509
1510config UFS_FS
1511 tristate "UFS file system support (read only)"
David Howells93614012006-09-30 20:45:40 +02001512 depends on BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07001513 help
1514 BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
1515 OpenBSD and NeXTstep) use a file system called UFS. Some System V
1516 Unixes can create and mount hard disk partitions and diskettes using
1517 this file system as well. Saying Y here will allow you to read from
1518 these partitions; if you also want to write to them, say Y to the
1519 experimental "UFS file system write support", below. Please read the
1520 file <file:Documentation/filesystems/ufs.txt> for more information.
1521
1522 The recently released UFS2 variant (used in FreeBSD 5.x) is
1523 READ-ONLY supported.
1524
1525 If you only intend to mount files from some other Unix over the
1526 network using NFS, you don't need the UFS file system support (but
1527 you need NFS file system support obviously).
1528
1529 Note that this option is generally not needed for floppies, since a
1530 good portable way to transport files and directories between unixes
1531 (and even other operating systems) is given by the tar program ("man
1532 tar" or preferably "info tar").
1533
1534 When accessing NeXTstep files, you may need to convert them from the
1535 NeXT character set to the Latin1 character set; use the program
1536 recode ("info recode") for this purpose.
1537
1538 To compile the UFS file system support as a module, choose M here: the
1539 module will be called ufs.
1540
1541 If you haven't heard about all of this before, it's safe to say N.
1542
1543config UFS_FS_WRITE
1544 bool "UFS file system write support (DANGEROUS)"
Evgeniy Dushistov5afb3142006-06-25 05:47:24 -07001545 depends on UFS_FS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001546 help
1547 Say Y here if you want to try writing to UFS partitions. This is
1548 experimental, so you should back up your UFS partitions beforehand.
1549
Evgeniy Dushistovabf5d152006-06-25 05:47:24 -07001550config UFS_DEBUG
1551 bool "UFS debugging"
1552 depends on UFS_FS
1553 help
1554 If you are experiencing any problems with the UFS filesystem, say
1555 Y here. This will result in _many_ additional debugging messages to be
1556 written to the system log.
1557
Linus Torvalds1da177e2005-04-16 15:20:36 -07001558endmenu
1559
Jan Engelhardtea0985a2007-10-16 23:30:16 -07001560menuconfig NETWORK_FILESYSTEMS
1561 bool "Network File Systems"
1562 default y
Linus Torvalds1da177e2005-04-16 15:20:36 -07001563 depends on NET
Jan Engelhardtea0985a2007-10-16 23:30:16 -07001564 ---help---
1565 Say Y here to get to see options for network filesystems and
1566 filesystem-related networking code, such as NFS daemon and
1567 RPCSEC security modules.
1568 This option alone does not add any kernel code.
1569
1570 If you say N, all options in this submenu will be skipped and
1571 disabled; if unsure, say Y here.
1572
1573if NETWORK_FILESYSTEMS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001574
1575config NFS_FS
1576 tristate "NFS file system support"
1577 depends on INET
1578 select LOCKD
1579 select SUNRPC
Andreas Gruenbacherb7fa0552005-06-22 17:16:27 +00001580 select NFS_ACL_SUPPORT if NFS_V3_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001581 help
1582 If you are connected to some other (usually local) Unix computer
1583 (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
1584 on that computer (the NFS server) using the Network File Sharing
1585 protocol, say Y. "Mounting files" means that the client can access
1586 the files with usual UNIX commands as if they were sitting on the
1587 client's hard disk. For this to work, the server must run the
1588 programs nfsd and mountd (but does not need to have NFS file system
1589 support enabled in its kernel). NFS is explained in the Network
1590 Administrator's Guide, available from
1591 <http://www.tldp.org/docs.html#guide>, on its man page: "man
1592 nfs", and in the NFS-HOWTO.
1593
1594 A superior but less widely used alternative to NFS is provided by
1595 the Coda file system; see "Coda file system support" below.
1596
1597 If you say Y here, you should have said Y to TCP/IP networking also.
1598 This option would enlarge your kernel by about 27 KB.
1599
1600 To compile this file system support as a module, choose M here: the
1601 module will be called nfs.
1602
1603 If you are configuring a diskless machine which will mount its root
1604 file system over NFS at boot time, say Y here and to "Kernel
1605 level IP autoconfiguration" above and to "Root file system on NFS"
1606 below. You cannot compile this driver as a module in this case.
1607 There are two packages designed for booting diskless machines over
1608 the net: netboot, available from
1609 <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
1610 available from <http://ftp1.sourceforge.net/etherboot/>.
1611
1612 If you don't know what all this is about, say N.
1613
1614config NFS_V3
1615 bool "Provide NFSv3 client support"
1616 depends on NFS_FS
1617 help
1618 Say Y here if you want your NFS client to be able to speak version
1619 3 of the NFS protocol.
1620
1621 If unsure, say Y.
1622
Andreas Gruenbacherb7fa0552005-06-22 17:16:27 +00001623config NFS_V3_ACL
1624 bool "Provide client support for the NFSv3 ACL protocol extension"
1625 depends on NFS_V3
1626 help
1627 Implement the NFSv3 ACL protocol extension for manipulating POSIX
1628 Access Control Lists. The server should also be compiled with
1629 the NFSv3 ACL protocol extension; see the CONFIG_NFSD_V3_ACL option.
1630
1631 If unsure, say N.
1632
Linus Torvalds1da177e2005-04-16 15:20:36 -07001633config NFS_V4
1634 bool "Provide NFSv4 client support (EXPERIMENTAL)"
1635 depends on NFS_FS && EXPERIMENTAL
1636 select RPCSEC_GSS_KRB5
1637 help
1638 Say Y here if you want your NFS client to be able to speak the newer
1639 version 4 of the NFS protocol.
1640
1641 Note: Requires auxiliary userspace daemons which may be found on
1642 http://www.citi.umich.edu/projects/nfsv4/
1643
1644 If unsure, say N.
1645
1646config NFS_DIRECTIO
Chuck Lever026ed5c2006-09-20 14:33:07 -04001647 bool "Allow direct I/O on NFS files"
1648 depends on NFS_FS
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649 help
1650 This option enables applications to perform uncached I/O on files
1651 in NFS file systems using the O_DIRECT open() flag. When O_DIRECT
1652 is set for a file, its data is not cached in the system's page
1653 cache. Data is moved to and from user-level application buffers
1654 directly. Unlike local disk-based file systems, NFS O_DIRECT has
1655 no alignment restrictions.
1656
1657 Unless your program is designed to use O_DIRECT properly, you are
1658 much better off allowing the NFS client to manage data caching for
1659 you. Misusing O_DIRECT can cause poor server performance or network
1660 storms. This kernel build option defaults OFF to avoid exposing
1661 system administrators unwittingly to a potentially hazardous
1662 feature.
1663
1664 For more details on NFS O_DIRECT, see fs/nfs/direct.c.
1665
1666 If unsure, say N. This reduces the size of the NFS client, and
1667 causes open() to return EINVAL if a file residing in NFS is
1668 opened with the O_DIRECT flag.
1669
1670config NFSD
1671 tristate "NFS server support"
1672 depends on INET
1673 select LOCKD
1674 select SUNRPC
1675 select EXPORTFS
Herbert Xuf05e15b2006-06-26 00:25:39 -07001676 select NFSD_V2_ACL if NFSD_V3_ACL
1677 select NFS_ACL_SUPPORT if NFSD_V2_ACL
1678 select NFSD_TCP if NFSD_V4
1679 select CRYPTO_MD5 if NFSD_V4
1680 select CRYPTO if NFSD_V4
1681 select FS_POSIX_ACL if NFSD_V4
Linus Torvalds1da177e2005-04-16 15:20:36 -07001682 help
1683 If you want your Linux box to act as an NFS *server*, so that other
1684 computers on your local network which support NFS can access certain
1685 directories on your box transparently, you have two options: you can
1686 use the self-contained user space program nfsd, in which case you
1687 should say N here, or you can say Y and use the kernel based NFS
1688 server. The advantage of the kernel based solution is that it is
1689 faster.
1690
1691 In either case, you will need support software; the respective
1692 locations are given in the file <file:Documentation/Changes> in the
1693 NFS section.
1694
1695 If you say Y here, you will get support for version 2 of the NFS
1696 protocol (NFSv2). If you also want NFSv3, say Y to the next question
1697 as well.
1698
1699 Please read the NFS-HOWTO, available from
1700 <http://www.tldp.org/docs.html#howto>.
1701
1702 To compile the NFS server support as a module, choose M here: the
1703 module will be called nfsd. If unsure, say N.
1704
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001705config NFSD_V2_ACL
1706 bool
1707 depends on NFSD
1708
Linus Torvalds1da177e2005-04-16 15:20:36 -07001709config NFSD_V3
1710 bool "Provide NFSv3 server support"
1711 depends on NFSD
1712 help
1713 If you would like to include the NFSv3 server as well as the NFSv2
1714 server, say Y here. If unsure, say Y.
1715
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001716config NFSD_V3_ACL
1717 bool "Provide server support for the NFSv3 ACL protocol extension"
1718 depends on NFSD_V3
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001719 help
1720 Implement the NFSv3 ACL protocol extension for manipulating POSIX
1721 Access Control Lists on exported file systems. NFS clients should
1722 be compiled with the NFSv3 ACL protocol extension; see the
1723 CONFIG_NFS_V3_ACL option. If unsure, say N.
1724
Linus Torvalds1da177e2005-04-16 15:20:36 -07001725config NFSD_V4
1726 bool "Provide NFSv4 server support (EXPERIMENTAL)"
Trond Myklebust8cd69e12007-07-19 10:03:34 -04001727 depends on NFSD && NFSD_V3 && EXPERIMENTAL
J. Bruce Fields42ed95c2007-07-17 04:04:41 -07001728 select RPCSEC_GSS_KRB5
Linus Torvalds1da177e2005-04-16 15:20:36 -07001729 help
1730 If you would like to include the NFSv4 server as well as the NFSv2
1731 and NFSv3 servers, say Y here. This feature is experimental, and
1732 should only be used if you are interested in helping to test NFSv4.
1733 If unsure, say N.
1734
1735config NFSD_TCP
1736 bool "Provide NFS server over TCP support"
1737 depends on NFSD
1738 default y
1739 help
1740 If you want your NFS server to support TCP connections, say Y here.
1741 TCP connections usually perform better than the default UDP when
1742 the network is lossy or congested. If unsure, say Y.
1743
1744config ROOT_NFS
1745 bool "Root file system on NFS"
1746 depends on NFS_FS=y && IP_PNP
1747 help
1748 If you want your Linux box to mount its whole root file system (the
1749 one containing the directory /) from some other computer over the
1750 net via NFS (presumably because your box doesn't have a hard disk),
1751 say Y. Read <file:Documentation/nfsroot.txt> for details. It is
1752 likely that in this case, you also want to say Y to "Kernel level IP
1753 autoconfiguration" so that your box can discover its network address
1754 at boot time.
1755
1756 Most people say N here.
1757
1758config LOCKD
1759 tristate
1760
1761config LOCKD_V4
1762 bool
1763 depends on NFSD_V3 || NFS_V3
1764 default y
1765
1766config EXPORTFS
1767 tristate
1768
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001769config NFS_ACL_SUPPORT
1770 tristate
1771 select FS_POSIX_ACL
1772
1773config NFS_COMMON
1774 bool
1775 depends on NFSD || NFS_FS
1776 default y
1777
Linus Torvalds1da177e2005-04-16 15:20:36 -07001778config SUNRPC
1779 tristate
1780
1781config SUNRPC_GSS
1782 tristate
1783
\"Talpey, Thomas\c3a57ed2007-09-10 13:49:15 -04001784config SUNRPC_XPRT_RDMA
1785 tristate "RDMA transport for sunrpc (EXPERIMENTAL)"
\"Talpey, Thomas\113632d2007-09-20 17:37:58 -04001786 depends on SUNRPC && INFINIBAND && EXPERIMENTAL
\"Talpey, Thomas\c3a57ed2007-09-10 13:49:15 -04001787 default m
1788 help
1789 Adds a client RPC transport for supporting kernel NFS over RDMA
1790 mounts, including Infiniband and iWARP. Experimental.
1791
Chuck Lever00a6e7b2007-03-29 16:48:33 -04001792config SUNRPC_BIND34
1793 bool "Support for rpcbind versions 3 & 4 (EXPERIMENTAL)"
1794 depends on SUNRPC && EXPERIMENTAL
1795 help
1796 Provides kernel support for querying rpcbind servers via versions 3
1797 and 4 of the rpcbind protocol. The kernel automatically falls back
1798 to version 2 if a remote rpcbind service does not support versions
1799 3 or 4.
1800
1801 If unsure, say N to get traditional behavior (version 2 rpcbind
1802 requests only).
1803
Linus Torvalds1da177e2005-04-16 15:20:36 -07001804config RPCSEC_GSS_KRB5
1805 tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
1806 depends on SUNRPC && EXPERIMENTAL
1807 select SUNRPC_GSS
1808 select CRYPTO
1809 select CRYPTO_MD5
1810 select CRYPTO_DES
Patrick McHardybcbaecb2006-10-25 16:49:36 +10001811 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001812 help
1813 Provides for secure RPC calls by means of a gss-api
1814 mechanism based on Kerberos V5. This is required for
1815 NFSv4.
1816
1817 Note: Requires an auxiliary userspace daemon which may be found on
1818 http://www.citi.umich.edu/projects/nfsv4/
1819
1820 If unsure, say N.
1821
1822config RPCSEC_GSS_SPKM3
1823 tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
1824 depends on SUNRPC && EXPERIMENTAL
1825 select SUNRPC_GSS
1826 select CRYPTO
1827 select CRYPTO_MD5
1828 select CRYPTO_DES
J. Bruce Fieldsdf6db302006-03-20 23:25:10 -05001829 select CRYPTO_CAST5
Patrick McHardybcbaecb2006-10-25 16:49:36 +10001830 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001831 help
1832 Provides for secure RPC calls by means of a gss-api
1833 mechanism based on the SPKM3 public-key mechanism.
1834
1835 Note: Requires an auxiliary userspace daemon which may be found on
1836 http://www.citi.umich.edu/projects/nfsv4/
1837
1838 If unsure, say N.
1839
1840config SMB_FS
1841 tristate "SMB file system support (to mount Windows shares etc.)"
1842 depends on INET
1843 select NLS
1844 help
1845 SMB (Server Message Block) is the protocol Windows for Workgroups
1846 (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
1847 files and printers over local networks. Saying Y here allows you to
1848 mount their file systems (often called "shares" in this context) and
1849 access them just like any other Unix directory. Currently, this
1850 works only if the Windows machines use TCP/IP as the underlying
1851 transport protocol, and not NetBEUI. For details, read
1852 <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
1853 available from <http://www.tldp.org/docs.html#howto>.
1854
1855 Note: if you just want your box to act as an SMB *server* and make
1856 files and printing services available to Windows clients (which need
1857 to have a TCP/IP stack), you don't need to say Y here; you can use
1858 the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
1859 for that.
1860
1861 General information about how to connect Linux, Windows machines and
1862 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1863
1864 To compile the SMB support as a module, choose M here: the module will
1865 be called smbfs. Most people say N, however.
1866
1867config SMB_NLS_DEFAULT
1868 bool "Use a default NLS"
1869 depends on SMB_FS
1870 help
1871 Enabling this will make smbfs use nls translations by default. You
1872 need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
1873 settings and you need to give the default nls for the SMB server as
1874 CONFIG_SMB_NLS_REMOTE.
1875
1876 The nls settings can be changed at mount time, if your smbmount
1877 supports that, using the codepage and iocharset parameters.
1878
1879 smbmount from samba 2.2.0 or later supports this.
1880
1881config SMB_NLS_REMOTE
1882 string "Default Remote NLS Option"
1883 depends on SMB_NLS_DEFAULT
1884 default "cp437"
1885 help
1886 This setting allows you to specify a default value for which
1887 codepage the server uses. If this field is left blank no
1888 translations will be done by default. The local codepage/charset
1889 default to CONFIG_NLS_DEFAULT.
1890
1891 The nls settings can be changed at mount time, if your smbmount
1892 supports that, using the codepage and iocharset parameters.
1893
1894 smbmount from samba 2.2.0 or later supports this.
1895
1896config CIFS
1897 tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)"
1898 depends on INET
1899 select NLS
1900 help
1901 This is the client VFS module for the Common Internet File System
1902 (CIFS) protocol which is the successor to the Server Message Block
1903 (SMB) protocol, the native file sharing mechanism for most early
1904 PC operating systems. The CIFS protocol is fully supported by
1905 file servers such as Windows 2000 (including Windows 2003, NT 4
1906 and Windows XP) as well by Samba (which provides excellent CIFS
Steve Frenchec58ef02005-11-04 09:44:33 -08001907 server support for Linux and many other operating systems). Limited
Steve French8af18972007-02-14 04:42:51 +00001908 support for OS/2 and Windows ME and similar servers is provided as well.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001909
1910 The intent of the cifs module is to provide an advanced
Steve French8af18972007-02-14 04:42:51 +00001911 network file system client for mounting to CIFS compliant servers,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001912 including support for dfs (hierarchical name space), secure per-user
1913 session establishment, safe distributed caching (oplock), optional
Steve French8af18972007-02-14 04:42:51 +00001914 packet signing, Unicode and other internationalization improvements.
1915 If you need to mount to Samba or Windows from this machine, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001916
1917config CIFS_STATS
1918 bool "CIFS statistics"
1919 depends on CIFS
1920 help
1921 Enabling this option will cause statistics for each server share
1922 mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
1923
Steve Frenchec58ef02005-11-04 09:44:33 -08001924config CIFS_STATS2
Steve French39798772006-05-31 22:40:51 +00001925 bool "Extended statistics"
Steve Frenchec58ef02005-11-04 09:44:33 -08001926 depends on CIFS_STATS
1927 help
1928 Enabling this option will allow more detailed statistics on SMB
1929 request timing to be displayed in /proc/fs/cifs/DebugData and also
1930 allow optional logging of slow responses to dmesg (depending on the
1931 value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
1932 These additional statistics may have a minor effect on performance
1933 and memory utilization.
1934
1935 Unless you are a developer or are doing network performance analysis
1936 or tuning, say N.
1937
Steve French39798772006-05-31 22:40:51 +00001938config CIFS_WEAK_PW_HASH
1939 bool "Support legacy servers which use weaker LANMAN security"
1940 depends on CIFS
1941 help
1942 Modern CIFS servers including Samba and most Windows versions
1943 (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
1944 security mechanisms. These hash the password more securely
1945 than the mechanisms used in the older LANMAN version of the
1946 SMB protocol needed to establish sessions with old SMB servers.
1947
1948 Enabling this option allows the cifs module to mount to older
1949 LANMAN based servers such as OS/2 and Windows 95, but such
1950 mounts may be less secure than mounts using NTLM or more recent
1951 security mechanisms if you are on a public network. Unless you
1952 have a need to access old SMB servers (and are on a private
1953 network) you probably want to say N. Even if this support
1954 is enabled in the kernel build, they will not be used
1955 automatically. At runtime LANMAN mounts are disabled but
1956 can be set to required (or optional) either in
1957 /proc/fs/cifs (see fs/cifs/README for more detail) or via an
1958 option on the mount command. This support is disabled by
1959 default in order to reduce the possibility of a downgrade
1960 attack.
1961
1962 If unsure, say N.
1963
Linus Torvalds1da177e2005-04-16 15:20:36 -07001964config CIFS_XATTR
Steve Frenchec58ef02005-11-04 09:44:33 -08001965 bool "CIFS extended attributes"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001966 depends on CIFS
1967 help
1968 Extended attributes are name:value pairs associated with inodes by
1969 the kernel or by users (see the attr(5) manual page, or visit
1970 <http://acl.bestbits.at/> for details). CIFS maps the name of
1971 extended attributes beginning with the user namespace prefix
1972 to SMB/CIFS EAs. EAs are stored on Windows servers without the
1973 user namespace prefix, but their names are seen by Linux cifs clients
1974 prefaced by the user namespace prefix. The system namespace
1975 (used by some filesystems to store ACLs) is not supported at
1976 this time.
Steve Frenchec58ef02005-11-04 09:44:33 -08001977
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978 If unsure, say N.
1979
1980config CIFS_POSIX
Steve Frenchec58ef02005-11-04 09:44:33 -08001981 bool "CIFS POSIX Extensions"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001982 depends on CIFS_XATTR
1983 help
1984 Enabling this option will cause the cifs client to attempt to
1985 negotiate a newer dialect with servers, such as Samba 3.0.5
1986 or later, that optionally can handle more POSIX like (rather
1987 than Windows like) file behavior. It also enables
1988 support for POSIX ACLs (getfacl and setfacl) to servers
1989 (such as Samba 3.10 and later) which can negotiate
1990 CIFS POSIX ACL support. If unsure, say N.
1991
Steve French39798772006-05-31 22:40:51 +00001992config CIFS_DEBUG2
Steve French3856a9d2006-06-01 19:38:46 +00001993 bool "Enable additional CIFS debugging routines"
Steve French8ba10ab2006-07-08 02:17:40 +00001994 depends on CIFS
Steve French39798772006-05-31 22:40:51 +00001995 help
1996 Enabling this option adds a few more debugging routines
1997 to the cifs code which slightly increases the size of
1998 the cifs module and can cause additional logging of debug
1999 messages in some error paths, slowing performance. This
2000 option can be turned off unless you are debugging
2001 cifs problems. If unsure, say N.
2002
Linus Torvalds1da177e2005-04-16 15:20:36 -07002003config CIFS_EXPERIMENTAL
2004 bool "CIFS Experimental Features (EXPERIMENTAL)"
Steve Frenchcb9dbff2005-11-02 11:37:15 -08002005 depends on CIFS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07002006 help
Steve Frenchec58ef02005-11-04 09:44:33 -08002007 Enables cifs features under testing. These features are
Steve French8af18972007-02-14 04:42:51 +00002008 experimental and currently include DFS support and directory
2009 change notification ie fcntl(F_DNOTIFY), as well as the upcall
2010 mechanism which will be used for Kerberos session negotiation
2011 and uid remapping. Some of these features also may depend on
2012 setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
2013 (which is disabled by default). See the file fs/cifs/README
2014 for more details. If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002015
Steve Frencha2653eb2005-11-10 15:33:38 -08002016config CIFS_UPCALL
Steve French39798772006-05-31 22:40:51 +00002017 bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
Steve Frencha2653eb2005-11-10 15:33:38 -08002018 depends on CIFS_EXPERIMENTAL
Jeff Layton09fe7ba2007-11-03 04:48:29 +00002019 depends on KEYS
Steve Frencha2653eb2005-11-10 15:33:38 -08002020 help
2021 Enables an upcall mechanism for CIFS which will be used to contact
2022 userspace helper utilities to provide SPNEGO packaged Kerberos
2023 tickets which are needed to mount to certain secure servers
Steve French1b397f42005-11-10 19:36:39 -08002024 (for which more secure Kerberos authentication is required). If
2025 unsure, say N.
Steve Frencha2653eb2005-11-10 15:33:38 -08002026
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027config NCP_FS
2028 tristate "NCP file system support (to mount NetWare volumes)"
2029 depends on IPX!=n || INET
2030 help
2031 NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
2032 used by Novell NetWare clients to talk to file servers. It is to
2033 IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
2034 to mount NetWare file server volumes and to access them just like
2035 any other Unix directory. For details, please read the file
2036 <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
2037 the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
2038
2039 You do not have to say Y here if you want your Linux box to act as a
2040 file *server* for Novell NetWare clients.
2041
2042 General information about how to connect Linux, Windows machines and
2043 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
2044
2045 To compile this as a module, choose M here: the module will be called
2046 ncpfs. Say N unless you are connected to a Novell network.
2047
2048source "fs/ncpfs/Kconfig"
2049
2050config CODA_FS
2051 tristate "Coda file system support (advanced network fs)"
2052 depends on INET
2053 help
2054 Coda is an advanced network file system, similar to NFS in that it
2055 enables you to mount file systems of a remote server and access them
2056 with regular Unix commands as if they were sitting on your hard
2057 disk. Coda has several advantages over NFS: support for
2058 disconnected operation (e.g. for laptops), read/write server
2059 replication, security model for authentication and encryption,
2060 persistent client caches and write back caching.
2061
2062 If you say Y here, your Linux box will be able to act as a Coda
2063 *client*. You will need user level code as well, both for the
2064 client and server. Servers are currently user level, i.e. they need
2065 no kernel support. Please read
2066 <file:Documentation/filesystems/coda.txt> and check out the Coda
2067 home page <http://www.coda.cs.cmu.edu/>.
2068
2069 To compile the coda client support as a module, choose M here: the
2070 module will be called coda.
2071
2072config CODA_FS_OLD_API
2073 bool "Use 96-bit Coda file identifiers"
2074 depends on CODA_FS
2075 help
2076 A new kernel-userspace API had to be introduced for Coda v6.0
2077 to support larger 128-bit file identifiers as needed by the
2078 new realms implementation.
2079
2080 However this new API is not backward compatible with older
2081 clients. If you really need to run the old Coda userspace
2082 cache manager then say Y.
2083
2084 For most cases you probably want to say N.
2085
2086config AFS_FS
David Howells64aaa4f2006-11-16 01:19:27 -08002087 tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002088 depends on INET && EXPERIMENTAL
David Howells08e0e7c2007-04-26 15:55:03 -07002089 select AF_RXRPC
Linus Torvalds1da177e2005-04-16 15:20:36 -07002090 help
2091 If you say Y here, you will get an experimental Andrew File System
2092 driver. It currently only supports unsecured read-only AFS access.
2093
Matt LaPlantecc2e2762006-10-03 22:22:29 +02002094 See <file:Documentation/filesystems/afs.txt> for more information.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002095
2096 If unsure, say N.
2097
David Howells08e0e7c2007-04-26 15:55:03 -07002098config AFS_DEBUG
2099 bool "AFS dynamic debugging"
2100 depends on AFS_FS
2101 help
2102 Say Y here to make runtime controllable debugging messages appear.
2103
2104 See <file:Documentation/filesystems/afs.txt> for more information.
2105
2106 If unsure, say N.
2107
Eric Van Hensbergen93fa58c2005-09-09 13:04:18 -07002108config 9P_FS
2109 tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
Latchesar Ionkovbd238fb2007-07-10 17:57:28 -05002110 depends on INET && NET_9P && EXPERIMENTAL
Eric Van Hensbergen93fa58c2005-09-09 13:04:18 -07002111 help
2112 If you say Y here, you will get experimental support for
2113 Plan 9 resource sharing via the 9P2000 protocol.
2114
2115 See <http://v9fs.sf.net> for more information.
2116
2117 If unsure, say N.
2118
Jan Engelhardtea0985a2007-10-16 23:30:16 -07002119endif # NETWORK_FILESYSTEMS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002120
David Howells93614012006-09-30 20:45:40 +02002121if BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -07002122menu "Partition Types"
2123
2124source "fs/partitions/Kconfig"
2125
2126endmenu
David Howells93614012006-09-30 20:45:40 +02002127endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07002128
2129source "fs/nls/Kconfig"
David Teiglande7fd4172006-01-18 09:30:29 +00002130source "fs/dlm/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002131
2132endmenu
2133