blob: eb4b33725db114984f4a967119a59e9892b225c3 [file] [log] [blame]
Roman Zippel80daa562008-01-14 04:51:16 +01001config ARCH
2 string
3 option env="ARCH"
4
5config KERNELVERSION
6 string
7 option env="KERNELVERSION"
8
Roman Zippelface4372006-06-08 22:12:45 -07009config DEFCONFIG_LIST
10 string
Paolo 'Blaisorblade' Giarrussob2670ea2006-10-19 23:28:23 -070011 depends on !UML
Roman Zippelface4372006-06-08 22:12:45 -070012 option defconfig_list
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
Sam Ravnborg73531902008-05-25 23:03:18 +020016 default "$ARCH_DEFCONFIG"
Roman Zippelface4372006-06-08 22:12:45 -070017 default "arch/$ARCH/defconfig"
18
Peter Oberparleiterb99b87f2009-06-17 16:28:03 -070019config CONSTRUCTORS
20 bool
21 depends on !UML
22 default y
23
Al Boldiff0cfc62007-07-31 00:39:23 -070024menu "General setup"
Linus Torvalds1da177e2005-04-16 15:20:36 -070025
26config EXPERIMENTAL
27 bool "Prompt for development and/or incomplete code/drivers"
28 ---help---
29 Some of the various things that Linux supports (such as network
30 drivers, file systems, network protocols, etc.) can be in a state
31 of development where the functionality, stability, or the level of
32 testing is not yet high enough for general use. This is usually
33 known as the "alpha-test" phase among developers. If a feature is
34 currently in alpha-test, then the developers usually discourage
35 uninformed widespread use of this feature by the general public to
36 avoid "Why doesn't this work?" type mail messages. However, active
37 testing and use of these systems is welcomed. Just be aware that it
38 may not meet the normal level of reliability or it may fail to work
39 in some special cases. Detailed bug reports from people familiar
40 with the kernel internals are usually welcomed by the developers
41 (before submitting bug reports, please read the documents
42 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
43 <file:Documentation/BUG-HUNTING>, and
44 <file:Documentation/oops-tracing.txt> in the kernel source).
45
46 This option will also make obsoleted drivers available. These are
47 drivers that have been replaced by something else, and/or are
48 scheduled to be removed in a future kernel release.
49
50 Unless you intend to help test and develop a feature or driver that
51 falls into this category, or you have a situation that requires
52 using these features, you should probably say N here, which will
53 cause the configurator to present you with fewer choices. If
54 you say Y here, you will be offered the choice of using features or
55 drivers that are currently considered to be in the alpha-test phase.
56
Linus Torvalds1da177e2005-04-16 15:20:36 -070057config BROKEN
58 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -070059
60config BROKEN_ON_SMP
61 bool
62 depends on BROKEN || !SMP
63 default y
64
65config LOCK_KERNEL
66 bool
67 depends on SMP || PREEMPT
68 default y
69
70config INIT_ENV_ARG_LIMIT
71 int
Adrian Bunkdd673bc2006-06-30 01:55:51 -070072 default 32 if !UML
73 default 128 if UML
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 help
Randy Dunlap34ad92c2005-10-30 15:01:46 -080075 Maximum of each of the number of arguments and environment
76 variables passed to init from the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -070077
Linus Torvalds1da177e2005-04-16 15:20:36 -070078
79config LOCALVERSION
80 string "Local version - append to kernel release"
81 help
82 Append an extra string to the end of your kernel version.
83 This will show up when you type uname, for example.
84 The string you set here will be appended after the contents of
85 any files with a filename matching localversion* in your
86 object and source tree, in that order. Your total string can
87 be a maximum of 64 characters.
88
Ryan Andersonaaebf432005-07-31 04:57:49 -040089config LOCALVERSION_AUTO
90 bool "Automatically append version information to the version string"
91 default y
92 help
93 This will try to automatically determine if the current tree is a
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020094 release tree by looking for git tags that belong to the current
95 top of tree revision.
Ryan Andersonaaebf432005-07-31 04:57:49 -040096
97 A string of the format -gxxxxxxxx will be added to the localversion
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020098 if a git-based tree is found. The string generated by this will be
Ryan Andersonaaebf432005-07-31 04:57:49 -040099 appended after any matching localversion* files, and after the value
Robert P. J. Day6e5a5422007-05-01 23:08:11 +0200100 set in CONFIG_LOCALVERSION.
Ryan Andersonaaebf432005-07-31 04:57:49 -0400101
Robert P. J. Day6e5a5422007-05-01 23:08:11 +0200102 (The actual string used here is the first eight characters produced
103 by running the command:
104
105 $ git rev-parse --verify HEAD
106
107 which is done within the script "scripts/setlocalversion".)
Ryan Andersonaaebf432005-07-31 04:57:49 -0400108
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800109config HAVE_KERNEL_GZIP
110 bool
111
112config HAVE_KERNEL_BZIP2
113 bool
114
115config HAVE_KERNEL_LZMA
116 bool
117
Alain Knaff30d65db2009-01-04 22:46:17 +0100118choice
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800119 prompt "Kernel compression mode"
120 default KERNEL_GZIP
121 depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
122 help
Alain Knaff30d65db2009-01-04 22:46:17 +0100123 The linux kernel is a kind of self-extracting executable.
124 Several compression algorithms are available, which differ
125 in efficiency, compression and decompression speed.
126 Compression speed is only relevant when building a kernel.
127 Decompression speed is relevant at each boot.
128
129 If you have any problems with bzip2 or lzma compressed
130 kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
131 version of this functionality (bzip2 only), for 2.4, was
132 supplied by Christian Ludwig)
133
134 High compression options are mostly useful for users, who
135 are low on disk space (embedded systems), but for whom ram
136 size matters less.
137
138 If in doubt, select 'gzip'
139
140config KERNEL_GZIP
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800141 bool "Gzip"
142 depends on HAVE_KERNEL_GZIP
143 help
144 The old and tried gzip compression. Its compression ratio is
145 the poorest among the 3 choices; however its speed (both
146 compression and decompression) is the fastest.
Alain Knaff30d65db2009-01-04 22:46:17 +0100147
148config KERNEL_BZIP2
149 bool "Bzip2"
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800150 depends on HAVE_KERNEL_BZIP2
Alain Knaff30d65db2009-01-04 22:46:17 +0100151 help
152 Its compression ratio and speed is intermediate.
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800153 Decompression speed is slowest among the three. The kernel
154 size is about 10% smaller with bzip2, in comparison to gzip.
155 Bzip2 uses a large amount of memory. For modern kernels you
156 will need at least 8MB RAM or more for booting.
Alain Knaff30d65db2009-01-04 22:46:17 +0100157
158config KERNEL_LZMA
H. Peter Anvin2e9f3bd2009-01-04 15:41:25 -0800159 bool "LZMA"
160 depends on HAVE_KERNEL_LZMA
161 help
162 The most recent compression algorithm.
163 Its ratio is best, decompression speed is between the other
164 two. Compression is slowest. The kernel size is about 33%
165 smaller with LZMA in comparison to gzip.
Alain Knaff30d65db2009-01-04 22:46:17 +0100166
167endchoice
168
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169config SWAP
170 bool "Support for paging of anonymous memory (swap)"
David Howells93614012006-09-30 20:45:40 +0200171 depends on MMU && BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700172 default y
173 help
174 This option allows you to choose whether you want to have support
Jesper Juhl92c35042006-01-15 02:40:08 +0100175 for so called swap devices or swap files in your kernel that are
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176 used to provide more virtual memory than the actual RAM present
177 in your computer. If unsure say Y.
178
179config SYSVIPC
180 bool "System V IPC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181 ---help---
182 Inter Process Communication is a suite of library functions and
183 system calls which let processes (running programs) synchronize and
184 exchange information. It is generally considered to be a good thing,
185 and some programs won't run unless you say Y here. In particular, if
186 you want to run the DOS emulator dosemu under Linux (read the
187 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
188 you'll need to say Y here.
189
190 You can find documentation about IPC with "info ipc" and also in
191 section 6.4 of the Linux Programmer's Guide, available from
192 <http://www.tldp.org/guides.html>.
193
Eric W. Biedermana5494dc2007-02-14 00:34:06 -0800194config SYSVIPC_SYSCTL
195 bool
196 depends on SYSVIPC
197 depends on SYSCTL
198 default y
199
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200config POSIX_MQUEUE
201 bool "POSIX Message Queues"
202 depends on NET && EXPERIMENTAL
203 ---help---
204 POSIX variant of message queues is a part of IPC. In POSIX message
205 queues every message has a priority which decides about succession
206 of receiving it by a process. If you want to compile and run
207 programs written e.g. for Solaris with use of its POSIX message
Robert P. J. Dayb0e37652007-05-09 07:25:13 +0200208 queues (functions mq_*) say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209
210 POSIX message queues are visible as a filesystem called 'mqueue'
211 and can be mounted somewhere if you want to do filesystem
212 operations on message queues.
213
214 If unsure, say Y.
215
Serge E. Hallynbdc8e5f2009-04-06 19:01:11 -0700216config POSIX_MQUEUE_SYSCTL
217 bool
218 depends on POSIX_MQUEUE
219 depends on SYSCTL
220 default y
221
Linus Torvalds1da177e2005-04-16 15:20:36 -0700222config BSD_PROCESS_ACCT
223 bool "BSD Process Accounting"
224 help
225 If you say Y here, a user level program will be able to instruct the
226 kernel (via a special system call) to write process accounting
227 information to a file: whenever a process exits, information about
228 that process will be appended to the file by the kernel. The
229 information includes things such as creation time, owning user,
230 command name, memory usage, controlling terminal etc. (the complete
231 list is in the struct acct in <file:include/linux/acct.h>). It is
232 up to the user level program to do useful things with this
233 information. This is generally a good idea, so say Y.
234
235config BSD_PROCESS_ACCT_V3
236 bool "BSD Process Accounting version 3 file format"
237 depends on BSD_PROCESS_ACCT
238 default n
239 help
240 If you say Y here, the process accounting information is written
241 in a new file format that also logs the process IDs of each
242 process and it's parent. Note that this file format is incompatible
243 with previous v0/v1/v2 file formats, so you will need updated tools
244 for processing it. A preliminary version of these tools is available
S.Çağlar Onur37a4c942008-06-18 11:45:13 +0300245 at <http://www.gnu.org/software/acct/>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246
Shailabh Nagarc7572492006-07-14 00:24:40 -0700247config TASKSTATS
248 bool "Export task/process statistics through netlink (EXPERIMENTAL)"
249 depends on NET
250 default n
251 help
252 Export selected statistics for tasks/processes through the
253 generic netlink interface. Unlike BSD process accounting, the
254 statistics are available during the lifetime of tasks/processes as
255 responses to commands. Like BSD accounting, they are sent to user
256 space on task exit.
257
258 Say N if unsure.
259
Shailabh Nagarca74e922006-07-14 00:24:36 -0700260config TASK_DELAY_ACCT
261 bool "Enable per-task delay accounting (EXPERIMENTAL)"
Shailabh Nagar6f449932006-07-14 00:24:41 -0700262 depends on TASKSTATS
Shailabh Nagarca74e922006-07-14 00:24:36 -0700263 help
264 Collect information on time spent by a task waiting for system
265 resources like cpu, synchronous block I/O completion and swapping
266 in pages. Such statistics can help in setting a task's priorities
267 relative to other tasks for cpu, io, rss limits etc.
268
269 Say N if unsure.
270
Alexey Dobriyan18f705f2007-02-10 01:46:44 -0800271config TASK_XACCT
272 bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
273 depends on TASKSTATS
274 help
275 Collect extended task accounting data and send the data
276 to userland for processing over the taskstats interface.
277
278 Say N if unsure.
279
280config TASK_IO_ACCOUNTING
281 bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
282 depends on TASK_XACCT
283 help
284 Collect information on the number of bytes of storage I/O which this
285 task has caused.
286
287 Say N if unsure.
288
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289config AUDIT
290 bool "Auditing support"
Chris Wright804a6a42005-05-11 10:52:45 +0100291 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292 help
293 Enable auditing infrastructure that can be used with another
294 kernel subsystem, such as SELinux (which requires this for
295 logging of avc messages output). Does not do system-call
296 auditing without CONFIG_AUDITSYSCALL.
297
298config AUDITSYSCALL
299 bool "Enable system-call auditing support"
Kumar Gala022382a2009-10-16 07:21:37 +0000300 depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700301 default y if SECURITY_SELINUX
302 help
303 Enable low-overhead system-call auditing infrastructure that
304 can be used independently or with another kernel subsystem,
Amy Griffisf368c07d2006-04-07 16:55:56 -0400305 such as SELinux. To use audit's filesystem watch feature, please
306 ensure that INOTIFY is configured.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307
Al Viro74c3cbe2007-07-22 08:04:18 -0400308config AUDIT_TREE
309 def_bool y
Eric Paris63c882a2009-05-21 17:02:01 -0400310 depends on AUDITSYSCALL
311 select INOTIFY
Al Viro74c3cbe2007-07-22 08:04:18 -0400312
Mike Travisc903ff82009-01-15 12:28:29 -0800313menu "RCU Subsystem"
314
315choice
316 prompt "RCU Implementation"
Paul E. McKenney31c9a242009-04-02 21:06:25 -0700317 default TREE_RCU
Mike Travisc903ff82009-01-15 12:28:29 -0800318
Mike Travisc903ff82009-01-15 12:28:29 -0800319config TREE_RCU
320 bool "Tree-based hierarchical RCU"
321 help
322 This option selects the RCU implementation that is
323 designed for very large SMP system with hundreds or
Paul E. McKenneyc17ef452009-06-23 17:12:47 -0700324 thousands of CPUs. It also scales down nicely to
325 smaller systems.
Mike Travisc903ff82009-01-15 12:28:29 -0800326
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700327config TREE_PREEMPT_RCU
328 bool "Preemptable tree-based hierarchical RCU"
329 depends on PREEMPT
330 help
331 This option selects the RCU implementation that is
332 designed for very large SMP systems with hundreds or
333 thousands of CPUs, but for which real-time response
Paul E. McKenneybbe3eae2009-09-13 09:15:08 -0700334 is also required. It also scales down nicely to
335 smaller systems.
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700336
Mike Travisc903ff82009-01-15 12:28:29 -0800337endchoice
338
339config RCU_TRACE
340 bool "Enable tracing for RCU"
Paul E. McKenney6b3ef482009-08-22 13:56:53 -0700341 depends on TREE_RCU || TREE_PREEMPT_RCU
Mike Travisc903ff82009-01-15 12:28:29 -0800342 help
343 This option provides tracing in RCU which presents stats
344 in debugfs for debugging RCU implementation.
345
346 Say Y here if you want to enable RCU tracing
347 Say N if you are unsure.
348
349config RCU_FANOUT
350 int "Tree-based hierarchical RCU fanout value"
351 range 2 64 if 64BIT
352 range 2 32 if !64BIT
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700353 depends on TREE_RCU || TREE_PREEMPT_RCU
Mike Travisc903ff82009-01-15 12:28:29 -0800354 default 64 if 64BIT
355 default 32 if !64BIT
356 help
357 This option controls the fanout of hierarchical implementations
358 of RCU, allowing RCU to work efficiently on machines with
359 large numbers of CPUs. This value must be at least the cube
360 root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
361 systems and up to 262,144 for 64-bit systems.
362
363 Select a specific number if testing RCU itself.
364 Take the default if unsure.
365
366config RCU_FANOUT_EXACT
367 bool "Disable tree-based hierarchical RCU auto-balancing"
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700368 depends on TREE_RCU || TREE_PREEMPT_RCU
Mike Travisc903ff82009-01-15 12:28:29 -0800369 default n
370 help
371 This option forces use of the exact RCU_FANOUT value specified,
372 regardless of imbalances in the hierarchy. This is useful for
373 testing RCU itself, and might one day be useful on systems with
374 strong NUMA behavior.
375
376 Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
377
378 Say N if unsure.
379
380config TREE_RCU_TRACE
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700381 def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
Mike Travisc903ff82009-01-15 12:28:29 -0800382 select DEBUG_FS
383 help
Paul E. McKenneyf41d9112009-08-22 13:56:52 -0700384 This option provides tracing for the TREE_RCU and
385 TREE_PREEMPT_RCU implementations, permitting Makefile to
386 trivially select kernel/rcutree_trace.c.
Mike Travisc903ff82009-01-15 12:28:29 -0800387
Mike Travisc903ff82009-01-15 12:28:29 -0800388endmenu # "RCU Subsystem"
389
Linus Torvalds1da177e2005-04-16 15:20:36 -0700390config IKCONFIG
Ross Birof2443ab2006-09-30 23:27:25 -0700391 tristate "Kernel .config support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392 ---help---
393 This option enables the complete Linux kernel ".config" file
394 contents to be saved in the kernel. It provides documentation
395 of which kernel options are used in a running kernel or in an
396 on-disk kernel. This information can be extracted from the kernel
397 image file with the script scripts/extract-ikconfig and used as
398 input to rebuild the current kernel or to build another kernel.
399 It can also be extracted from a running kernel by reading
400 /proc/config.gz if enabled (below).
401
402config IKCONFIG_PROC
403 bool "Enable access to .config through /proc/config.gz"
404 depends on IKCONFIG && PROC_FS
405 ---help---
406 This option enables access to the kernel configuration file
407 through /proc/config.gz.
408
Alistair John Strachan794543a2007-05-08 00:31:15 -0700409config LOG_BUF_SHIFT
410 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
411 range 12 21
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700412 default 17
Alistair John Strachan794543a2007-05-08 00:31:15 -0700413 help
414 Select kernel log buffer size as a power of 2.
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700415 Examples:
416 17 => 128 KB
417 16 => 64 KB
418 15 => 32 KB
419 14 => 16 KB
Alistair John Strachan794543a2007-05-08 00:31:15 -0700420 13 => 8 KB
421 12 => 4 KB
422
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800423#
424# Architectures with an unreliable sched_clock() should select this:
425#
426config HAVE_UNSTABLE_SCHED_CLOCK
427 bool
428
429config GROUP_SCHED
430 bool "Group CPU scheduler"
431 depends on EXPERIMENTAL
432 default n
433 help
434 This feature lets CPU scheduler recognize task groups and control CPU
435 bandwidth allocation to such task groups.
436 In order to create a group from arbitrary set of processes, use
437 CONFIG_CGROUPS. (See Control Group support.)
438
439config FAIR_GROUP_SCHED
440 bool "Group scheduling for SCHED_OTHER"
441 depends on GROUP_SCHED
442 default GROUP_SCHED
443
444config RT_GROUP_SCHED
445 bool "Group scheduling for SCHED_RR/FIFO"
446 depends on EXPERIMENTAL
447 depends on GROUP_SCHED
448 default n
449 help
450 This feature lets you explicitly allocate real CPU bandwidth
451 to users or control groups (depending on the "Basis for grouping tasks"
452 setting below. If enabled, it will also make it impossible to
453 schedule realtime tasks for non-root users until you allocate
454 realtime bandwidth for them.
455 See Documentation/scheduler/sched-rt-group.txt for more information.
456
457choice
458 depends on GROUP_SCHED
459 prompt "Basis for grouping tasks"
460 default USER_SCHED
461
462config USER_SCHED
463 bool "user id"
464 help
465 This option will choose userid as the basis for grouping
466 tasks, thus providing equal CPU bandwidth to each user.
467
468config CGROUP_SCHED
469 bool "Control groups"
470 depends on CGROUPS
471 help
472 This option allows you to create arbitrary task groups
473 using the "cgroup" pseudo filesystem and control
474 the cpu bandwidth allocated to each such task group.
Li Zefan45ce80f2009-01-15 13:50:59 -0800475 Refer to Documentation/cgroups/cgroups.txt for more
476 information on "cgroup" pseudo filesystem.
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800477
478endchoice
479
Li Zefan23964d22009-01-15 13:50:58 -0800480menuconfig CGROUPS
481 boolean "Control Group support"
Paul Menageddbcc7e2007-10-18 23:39:30 -0700482 help
Li Zefan23964d22009-01-15 13:50:58 -0800483 This option adds support for grouping sets of processes together, for
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800484 use with process control subsystems such as Cpusets, CFS, memory
485 controls or device isolation.
486 See
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800487 - Documentation/scheduler/sched-design-CFS.txt (CFS)
Li Zefan45ce80f2009-01-15 13:50:59 -0800488 - Documentation/cgroups/ (features for grouping, isolation
489 and resource control)
Paul Menageddbcc7e2007-10-18 23:39:30 -0700490
491 Say N if unsure.
492
Li Zefan23964d22009-01-15 13:50:58 -0800493if CGROUPS
494
Paul Menage006cb992007-10-18 23:39:43 -0700495config CGROUP_DEBUG
496 bool "Example debug cgroup subsystem"
497 depends on CGROUPS
Paul Menage418d7d82008-04-29 01:00:05 -0700498 default n
Paul Menage006cb992007-10-18 23:39:43 -0700499 help
500 This option enables a simple cgroup subsystem that
501 exports useful debugging information about the cgroups
Li Zefan23964d22009-01-15 13:50:58 -0800502 framework.
Paul Menage006cb992007-10-18 23:39:43 -0700503
Li Zefan23964d22009-01-15 13:50:58 -0800504 Say N if unsure.
Paul Menage006cb992007-10-18 23:39:43 -0700505
Serge E. Hallyn858d72e2007-10-18 23:39:45 -0700506config CGROUP_NS
Li Zefan23964d22009-01-15 13:50:58 -0800507 bool "Namespace cgroup subsystem"
508 depends on CGROUPS
509 help
510 Provides a simple namespace cgroup subsystem to
511 provide hierarchical naming of sets of namespaces,
512 for instance virtual servers and checkpoint/restart
513 jobs.
Serge E. Hallyn858d72e2007-10-18 23:39:45 -0700514
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700515config CGROUP_FREEZER
Li Zefan23964d22009-01-15 13:50:58 -0800516 bool "Freezer cgroup subsystem"
517 depends on CGROUPS
518 help
519 Provides a way to freeze and unfreeze all tasks in a
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700520 cgroup.
521
Serge E. Hallyn08ce5f12008-04-29 01:00:10 -0700522config CGROUP_DEVICE
523 bool "Device controller for cgroups"
524 depends on CGROUPS && EXPERIMENTAL
525 help
526 Provides a cgroup implementing whitelists for devices which
527 a process in the cgroup can mknod or open.
528
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529config CPUSETS
530 bool "Cpuset support"
Paul Menagedb7f47c2009-04-02 16:57:55 -0700531 depends on CGROUPS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532 help
Randy Dunlapd9fd8a62005-07-27 11:45:11 -0700533 This option will let you create and manage CPUSETs which
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534 allow dynamically partitioning a system into sets of CPUs and
535 Memory Nodes and assigning tasks to run only within those sets.
536 This is primarily useful on large SMP or NUMA systems.
537
538 Say N if unsure.
539
Li Zefan23964d22009-01-15 13:50:58 -0800540config PROC_PID_CPUSET
541 bool "Include legacy /proc/<pid>/cpuset file"
542 depends on CPUSETS
543 default y
544
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100545config CGROUP_CPUACCT
546 bool "Simple CPU accounting cgroup subsystem"
547 depends on CGROUPS
548 help
549 Provides a simple Resource Controller for monitoring the
Li Zefan23964d22009-01-15 13:50:58 -0800550 total CPU consumed by the tasks in a cgroup.
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100551
Pavel Emelianove552b662008-02-07 00:13:49 -0800552config RESOURCE_COUNTERS
553 bool "Resource counters"
554 help
555 This option enables controller independent resource accounting
Li Zefan23964d22009-01-15 13:50:58 -0800556 infrastructure that works with cgroups.
Pavel Emelianove552b662008-02-07 00:13:49 -0800557 depends on CGROUPS
558
Balbir Singh00f0b822008-03-04 14:28:39 -0800559config CGROUP_MEM_RES_CTLR
560 bool "Memory Resource Controller for Control Groups"
561 depends on CGROUPS && RESOURCE_COUNTERS
Balbir Singhcf475ad2008-04-29 01:00:16 -0700562 select MM_OWNER
Balbir Singh00f0b822008-03-04 14:28:39 -0800563 help
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700564 Provides a memory resource controller that manages both anonymous
Thadeu Lima de Souza Cascardo21acb9c2009-02-04 10:12:08 +0100565 memory and page cache. (See Documentation/cgroups/memory.txt)
Balbir Singh00f0b822008-03-04 14:28:39 -0800566
567 Note that setting this option increases fixed memory overhead
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700568 associated with each page of memory in the system. By this,
569 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
570 usage tracking struct at boot. Total amount of this is printed out
571 at boot.
Balbir Singh00f0b822008-03-04 14:28:39 -0800572
573 Only enable when you're ok with these trade offs and really
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700574 sure you need the memory resource controller. Even when you enable
575 this, you can set "cgroup_disable=memory" at your boot option to
576 disable memory resource controller and you can avoid overheads.
Li Zefanc9d54092009-01-07 18:07:35 -0800577 (and lose benefits of memory resource controller)
Balbir Singh00f0b822008-03-04 14:28:39 -0800578
Balbir Singhcf475ad2008-04-29 01:00:16 -0700579 This config option also selects MM_OWNER config option, which
580 could in turn add some fork/exit overhead.
581
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800582config CGROUP_MEM_RES_CTLR_SWAP
583 bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
584 depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
585 help
586 Add swap management feature to memory resource controller. When you
587 enable this, you can limit mem+swap usage per cgroup. In other words,
588 when you disable this, memory resource controller has no cares to
589 usage of swap...a process can exhaust all of the swap. This extension
590 is useful when you want to avoid exhaustion swap but this itself
591 adds more overheads and consumes memory for remembering information.
592 Especially if you use 32bit system or small memory system, please
593 be careful about enabling this. When memory resource controller
594 is disabled by boot option, this will be automatically disabled and
595 there will be no overhead from this. Even when you set this config=y,
596 if boot option "noswapaccount" is set, swap will not be accounted.
KAMEZAWA Hiroyuki627991a2009-04-02 16:57:47 -0700597 Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
598 size is 4096bytes, 512k per 1Gbytes of swap.
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800599
Li Zefan23964d22009-01-15 13:50:58 -0800600endif # CGROUPS
KAMEZAWA Hiroyukic0777192009-01-07 18:07:57 -0800601
Li Zefan23964d22009-01-15 13:50:58 -0800602config MM_OWNER
603 bool
KAMEZAWA Hiroyuki5cdc38f2009-01-07 18:07:30 -0800604
Kay Sievers88a22c92006-09-14 11:23:28 +0200605config SYSFS_DEPRECATED
Ingo Molnard47846c2008-03-04 14:54:47 +0100606 bool
607
608config SYSFS_DEPRECATED_V2
Randy Dunlape9438e32009-12-01 13:17:50 -0800609 bool "enable deprecated sysfs features which may confuse old userspace tools"
Randy Dunlap9148fe82007-12-31 10:05:34 -0800610 depends on SYSFS
Kay Sieversf6ee6492009-04-16 19:56:37 +0200611 default n
Ingo Molnard47846c2008-03-04 14:54:47 +0100612 select SYSFS_DEPRECATED
Kay Sievers88a22c92006-09-14 11:23:28 +0200613 help
Kay Sieversfce3e802008-11-01 14:03:00 +0100614 This option switches the layout of sysfs to the deprecated
Kay Sieversf6ee6492009-04-16 19:56:37 +0200615 version. Do not use it on recent distributions.
Kay Sievers88a22c92006-09-14 11:23:28 +0200616
Kay Sieversfce3e802008-11-01 14:03:00 +0100617 The current sysfs layout features a unified device tree at
618 /sys/devices/, which is able to express a hierarchy between
619 class devices. If the deprecated option is set to Y, the
620 unified device tree is split into a bus device tree at
621 /sys/devices/ and several individual class device trees at
622 /sys/class/. The class and bus devices will be connected by
623 "<subsystem>:<name>" and the "device" links. The "block"
624 class devices, will not show up in /sys/class/block/. Some
625 subsystems will suppress the creation of some devices which
626 depend on the unified device tree.
Kay Sievers88a22c92006-09-14 11:23:28 +0200627
Kay Sieversfce3e802008-11-01 14:03:00 +0100628 This option is not a pure compatibility option that can
629 be safely enabled on newer distributions. It will change the
630 layout of sysfs to the non-extensible deprecated version,
631 and disable some features, which can not be exported without
632 confusing older userspace tools. Since 2007/2008 all major
633 distributions do not enable this option, and ship no tools which
634 depend on the deprecated layout or this option.
635
636 If you are using a new kernel on an older distribution, or use
637 older userspace tools, you might need to say Y here. Do not say Y,
638 if the original kernel, that came with your distribution, has
639 this option set to N.
Kay Sievers88a22c92006-09-14 11:23:28 +0200640
Jens Axboeb86ff982006-03-23 19:56:55 +0100641config RELAY
642 bool "Kernel->user space relay support (formerly relayfs)"
643 help
644 This option enables support for relay interface support in
645 certain file systems (such as debugfs).
646 It is designed to provide an efficient mechanism for tools and
647 facilities to relay large amounts of data from kernel space to
648 user space.
649
650 If unsure, say N.
651
Pavel Emelyanovc5289a62008-02-08 04:18:19 -0800652config NAMESPACES
653 bool "Namespaces support" if EMBEDDED
654 default !EMBEDDED
655 help
656 Provides the way to make tasks work with different objects using
657 the same id. For example same IPC id may refer to different objects
658 or same user id or pid may refer to different tasks when used in
659 different namespaces.
660
Pavel Emelyanov58bfdd6d2008-02-08 04:18:21 -0800661config UTS_NS
662 bool "UTS namespace"
663 depends on NAMESPACES
664 help
665 In this namespace tasks see different info provided with the
666 uname() system call
667
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800668config IPC_NS
669 bool "IPC namespace"
Serge E. Hallyn614b84c2009-04-06 19:01:08 -0700670 depends on NAMESPACES && (SYSVIPC || POSIX_MQUEUE)
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800671 help
672 In this namespace tasks work with IPC ids which correspond to
Serge E. Hallyn614b84c2009-04-06 19:01:08 -0700673 different IPC objects in different namespaces.
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800674
Pavel Emelyanovaee16ce2008-02-08 04:18:23 -0800675config USER_NS
676 bool "User namespace (EXPERIMENTAL)"
677 depends on NAMESPACES && EXPERIMENTAL
678 help
679 This allows containers, i.e. vservers, to use user namespaces
680 to provide different user info for different servers.
681 If unsure, say N.
682
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -0800683config PID_NS
684 bool "PID Namespaces (EXPERIMENTAL)"
685 default n
686 depends on NAMESPACES && EXPERIMENTAL
687 help
Heikki Orsila12d2b8f2008-07-06 15:48:02 +0300688 Support process id namespaces. This allows having multiple
Matt LaPlante692105b2009-01-26 11:12:25 +0100689 processes with the same pid as long as they are in different
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -0800690 pid namespaces. This is a building block of containers.
691
692 Unless you want to work with an experimental feature
693 say N here.
694
Matt Helsleyd6eb6332009-01-26 12:25:55 -0800695config NET_NS
696 bool "Network namespace"
697 default n
698 depends on NAMESPACES && EXPERIMENTAL && NET
699 help
700 Allow user space to create what appear to be multiple instances
701 of the network stack.
702
Dimitri Gorokhovikf9916332007-03-06 01:42:17 -0800703config BLK_DEV_INITRD
704 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
705 depends on BROKEN || !FRV
706 help
707 The initial RAM filesystem is a ramfs which is loaded by the
708 boot loader (loadlin or lilo) and that is mounted as root
709 before the normal boot procedure. It is typically used to
710 load modules needed to mount the "real" root file system,
711 etc. See <file:Documentation/initrd.txt> for details.
712
713 If RAM disk support (BLK_DEV_RAM) is also included, this
714 also enables initial RAM disk (initrd) support and adds
715 15 Kbytes (more on some other architectures) to the kernel size.
716
717 If unsure say Y.
718
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800719if BLK_DEV_INITRD
720
Sam Ravnborgdbec4862005-08-10 20:44:50 +0200721source "usr/Kconfig"
722
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800723endif
724
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800725config CC_OPTIMIZE_FOR_SIZE
Ingo Molnar96fffeb2008-04-28 01:39:43 +0200726 bool "Optimize for size"
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800727 default y
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800728 help
729 Enabling this option will pass "-Os" instead of "-O2" to gcc
730 resulting in a smaller kernel.
731
jkacur775a7222008-07-16 00:31:16 +0200732 If unsure, say Y.
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800733
Randy Dunlap08470622006-09-30 23:28:13 -0700734config SYSCTL
735 bool
736
Randy Dunlapb943c462009-03-10 12:55:46 -0700737config ANON_INODES
738 bool
739
Linus Torvalds1da177e2005-04-16 15:20:36 -0700740menuconfig EMBEDDED
741 bool "Configure standard kernel features (for small systems)"
742 help
743 This option allows certain base kernel options and settings
744 to be disabled or tweaked. This is for specialized
745 environments which can tolerate a "non-standard" kernel.
746 Only use this if you really know what you are doing.
747
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700748config UID16
749 bool "Enable 16-bit UID system calls" if EMBEDDED
David S. Miller09337f52008-04-26 03:17:12 -0700750 depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700751 default y
752 help
753 This enables the legacy 16-bit UID syscall wrappers.
754
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700755config SYSCTL_SYSCALL
Randy Dunlap08470622006-09-30 23:28:13 -0700756 bool "Sysctl syscall support" if EMBEDDED
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800757 default y
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700758 select SYSCTL
759 ---help---
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800760 sys_sysctl uses binary paths that have been found challenging
761 to properly maintain and use. The interface in /proc/sys
762 using paths with ascii names is now the primary path to this
763 information.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700764
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800765 Almost nothing using the binary sysctl interface so if you are
766 trying to save some space it is probably safe to disable this,
767 making your kernel marginally smaller.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700768
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800769 If unsure say Y here.
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700770
Linus Torvalds1da177e2005-04-16 15:20:36 -0700771config KALLSYMS
Jesper Juhl979c6a12006-12-12 19:25:11 +0100772 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700773 default y
774 help
775 Say Y here to let the kernel print out symbolic crash information and
776 symbolic stack backtraces. This increases the size of the kernel
777 somewhat, as all symbols have to be loaded into the kernel image.
778
779config KALLSYMS_ALL
780 bool "Include all symbols in kallsyms"
781 depends on DEBUG_KERNEL && KALLSYMS
782 help
783 Normally kallsyms only contains the symbols of functions, for nicer
784 OOPS messages. Some debuggers can use kallsyms for other
Jesper Juhlf9f97bc2005-07-20 05:43:05 +0200785 symbols too: say Y here to include all symbols, if you need them
786 and you don't care about adding 300k to the size of your kernel.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700787
788 Say N.
789
790config KALLSYMS_EXTRA_PASS
791 bool "Do an extra kallsyms pass"
792 depends on KALLSYMS
793 help
794 If kallsyms is not working correctly, the build will fail with
795 inconsistent kallsyms data. If that occurs, log a bug report and
796 turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
797 Always say N here unless you find a bug in kallsyms, which must be
798 reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
799 you wait for kallsyms to be fixed.
800
Matt Mackalld59745c2005-05-01 08:59:02 -0700801
Greg Kroah-Hartman712f47c2005-11-16 11:27:07 -0800802config HOTPLUG
803 bool "Support for hot-pluggable devices" if EMBEDDED
804 default y
805 help
806 This option is provided for the case where no hotplug or uevent
807 capabilities is wanted by the kernel. You should only consider
808 disabling this option for embedded systems that do not use modules, a
809 dynamic /dev tree, or dynamic device discovery. Just say Y.
810
Matt Mackalld59745c2005-05-01 08:59:02 -0700811config PRINTK
812 default y
813 bool "Enable support for printk" if EMBEDDED
814 help
815 This option enables normal printk support. Removing it
816 eliminates most of the message strings from the kernel image
817 and makes the kernel more or less silent. As this makes it
818 very difficult to diagnose system problems, saying N here is
819 strongly discouraged.
820
Matt Mackallc8538a72005-05-01 08:59:01 -0700821config BUG
822 bool "BUG() support" if EMBEDDED
823 default y
824 help
825 Disabling this option eliminates support for BUG and WARN, reducing
826 the size of your kernel image and potentially quietly ignoring
827 numerous fatal conditions. You should only consider disabling this
828 option for embedded systems with no facilities for reporting errors.
829 Just say Y.
830
Matt Mackall708e9a72006-01-08 01:05:25 -0800831config ELF_CORE
832 default y
833 bool "Enable ELF core dumps" if EMBEDDED
834 help
835 Enable support for generating core dumps. Disabling saves about 4k.
836
Stas Sergeeve5e1d3c2008-05-07 12:39:56 +0200837config PCSPKR_PLATFORM
838 bool "Enable PC-Speaker support" if EMBEDDED
839 depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
840 default y
841 help
842 This option allows to disable the internal PC-Speaker
843 support, saving some memory.
844
Linus Torvalds1da177e2005-04-16 15:20:36 -0700845config BASE_FULL
846 default y
847 bool "Enable full-sized data structures for core" if EMBEDDED
848 help
849 Disabling this option reduces the size of miscellaneous core
850 kernel data structures. This saves memory on small machines,
851 but may reduce performance.
852
853config FUTEX
854 bool "Enable futex support" if EMBEDDED
855 default y
Ingo Molnar23f78d42006-06-27 02:54:53 -0700856 select RT_MUTEXES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700857 help
858 Disabling this option will cause the kernel to be built without
859 support for "fast userspace mutexes". The resulting kernel may not
860 run glibc-based applications correctly.
861
862config EPOLL
863 bool "Enable eventpoll support" if EMBEDDED
864 default y
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700865 select ANON_INODES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700866 help
867 Disabling this option will cause the kernel to be built without
868 support for epoll family of system calls.
869
Davide Libenzifba2afa2007-05-10 22:23:13 -0700870config SIGNALFD
871 bool "Enable signalfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700872 select ANON_INODES
Davide Libenzifba2afa2007-05-10 22:23:13 -0700873 default y
874 help
875 Enable the signalfd() system call that allows to receive signals
876 on a file descriptor.
877
878 If unsure, say Y.
879
Davide Libenzib215e282007-05-10 22:23:16 -0700880config TIMERFD
881 bool "Enable timerfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700882 select ANON_INODES
Davide Libenzib215e282007-05-10 22:23:16 -0700883 default y
884 help
885 Enable the timerfd() system call that allows to receive timer
886 events on a file descriptor.
887
888 If unsure, say Y.
889
Davide Libenzie1ad7462007-05-10 22:23:19 -0700890config EVENTFD
891 bool "Enable eventfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700892 select ANON_INODES
Davide Libenzie1ad7462007-05-10 22:23:19 -0700893 default y
894 help
895 Enable the eventfd() system call that allows to receive both
896 kernel notification (ie. KAIO) or userspace notifications.
897
898 If unsure, say Y.
899
Linus Torvalds1da177e2005-04-16 15:20:36 -0700900config SHMEM
901 bool "Use full shmem filesystem" if EMBEDDED
902 default y
903 depends on MMU
904 help
905 The shmem is an internal filesystem used to manage shared memory.
906 It is backed by swap and manages resource limits. It is also exported
907 to userspace as tmpfs if TMPFS is enabled. Disabling this
908 option replaces shmem and tmpfs with the much simpler ramfs code,
909 which may be appropriate on small systems without swap.
910
Thomas Petazzoniebf3f092008-10-15 22:05:12 -0700911config AIO
912 bool "Enable AIO support" if EMBEDDED
913 default y
914 help
915 This option enables POSIX asynchronous I/O which may by used
916 by some high performance threaded applications. Disabling
917 this option saves about 7k.
918
Ingo Molnarcdd6c482009-09-21 12:02:48 +0200919config HAVE_PERF_EVENTS
Thomas Gleixner0793a612008-12-04 20:12:29 +0100920 bool
Mike Frysinger018df722009-06-12 13:17:43 -0400921 help
922 See tools/perf/design.txt for details.
Thomas Gleixner0793a612008-12-04 20:12:29 +0100923
Peter Zijlstra906010b2009-09-21 16:08:49 +0200924config PERF_USE_VMALLOC
925 bool
926 help
927 See tools/perf/design.txt for details
928
Ingo Molnar57c0c152009-09-21 12:20:38 +0200929menu "Kernel Performance Events And Counters"
Thomas Gleixner0793a612008-12-04 20:12:29 +0100930
Ingo Molnarcdd6c482009-09-21 12:02:48 +0200931config PERF_EVENTS
Ingo Molnar57c0c152009-09-21 12:20:38 +0200932 bool "Kernel performance events and counters"
933 default y if (PROFILING || PERF_COUNTERS)
Ingo Molnarcdd6c482009-09-21 12:02:48 +0200934 depends on HAVE_PERF_EVENTS
Ingo Molnar4c59e462008-12-08 19:38:33 +0100935 select ANON_INODES
Thomas Gleixner0793a612008-12-04 20:12:29 +0100936 help
Ingo Molnar57c0c152009-09-21 12:20:38 +0200937 Enable kernel support for various performance events provided
938 by software and hardware.
Thomas Gleixner0793a612008-12-04 20:12:29 +0100939
Thadeu Lima de Souza Cascardodd770382009-10-30 19:32:25 -0200940 Software events are supported either built-in or via the
Ingo Molnar57c0c152009-09-21 12:20:38 +0200941 use of generic tracepoints.
942
943 Most modern CPUs support performance events via performance
944 counter registers. These registers count the number of certain
Thomas Gleixner0793a612008-12-04 20:12:29 +0100945 types of hw events: such as instructions executed, cachemisses
946 suffered, or branches mis-predicted - without slowing down the
947 kernel or applications. These registers can also trigger interrupts
948 when a threshold number of events have passed - and can thus be
949 used to profile the code that runs on that CPU.
950
Ingo Molnar57c0c152009-09-21 12:20:38 +0200951 The Linux Performance Event subsystem provides an abstraction of
Thadeu Lima de Souza Cascardodd770382009-10-30 19:32:25 -0200952 these software and hardware event capabilities, available via a
Ingo Molnar57c0c152009-09-21 12:20:38 +0200953 system call and used by the "perf" utility in tools/perf/. It
Thomas Gleixner0793a612008-12-04 20:12:29 +0100954 provides per task and per CPU counters, and it provides event
955 capabilities on top of those.
956
957 Say Y if unsure.
958
Peter Zijlstrae077df42009-03-19 20:26:17 +0100959config EVENT_PROFILE
Peter Zijlstra470a1392009-07-29 10:50:09 +0200960 bool "Tracepoint profiling sources"
Ingo Molnarcdd6c482009-09-21 12:02:48 +0200961 depends on PERF_EVENTS && EVENT_TRACING
Peter Zijlstrae077df42009-03-19 20:26:17 +0100962 default y
Peter Zijlstra470a1392009-07-29 10:50:09 +0200963 help
Ingo Molnar57c0c152009-09-21 12:20:38 +0200964 Allow the use of tracepoints as software performance events.
Peter Zijlstra470a1392009-07-29 10:50:09 +0200965
Ingo Molnar57c0c152009-09-21 12:20:38 +0200966 When this is enabled, you can create perf events based on
Peter Zijlstra470a1392009-07-29 10:50:09 +0200967 tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID
968 found in debugfs://tracing/events/*/*/id. (The -e/--events
969 option to the perf tool can parse and interpret symbolic
970 tracepoints, in the subsystem:tracepoint_name format.)
Peter Zijlstrae077df42009-03-19 20:26:17 +0100971
Ingo Molnar57c0c152009-09-21 12:20:38 +0200972config PERF_COUNTERS
973 bool "Kernel performance counters (old config option)"
974 depends on HAVE_PERF_EVENTS
975 help
976 This config has been obsoleted by the PERF_EVENTS
977 config option - please see that one for details.
978
979 It has no effect on the kernel whether you enable
980 it or not, it is a compatibility placeholder.
981
982 Say N if unsure.
983
Peter Zijlstra906010b2009-09-21 16:08:49 +0200984config DEBUG_PERF_USE_VMALLOC
985 default n
986 bool "Debug: use vmalloc to back perf mmap() buffers"
987 depends on PERF_EVENTS && DEBUG_KERNEL
988 select PERF_USE_VMALLOC
989 help
990 Use vmalloc memory to back perf mmap() buffers.
991
992 Mostly useful for debugging the vmalloc code on platforms
993 that don't require it.
994
995 Say N if unsure.
996
Thomas Gleixner0793a612008-12-04 20:12:29 +0100997endmenu
998
Christoph Lameterf8891e52006-06-30 01:55:45 -0700999config VM_EVENT_COUNTERS
1000 default y
1001 bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
1002 help
Paul Jackson2aea4fb2006-12-22 01:06:10 -08001003 VM event counters are needed for event counts to be shown.
1004 This option allows the disabling of the VM event counters
1005 on EMBEDDED systems. /proc/vmstat will only show page counts
1006 if VM event counters are disabled.
Christoph Lameterf8891e52006-06-30 01:55:45 -07001007
Thomas Petazzoni3d137312008-08-19 10:28:24 +02001008config PCI_QUIRKS
1009 default y
Geert Uytterhoeven61cfc7e2008-10-22 08:53:25 +02001010 bool "Enable PCI quirk workarounds" if EMBEDDED
1011 depends on PCI
Thomas Petazzoni3d137312008-08-19 10:28:24 +02001012 help
1013 This enables workarounds for various PCI chipset
1014 bugs/quirks. Disable this only if your target machine is
1015 unaffected by PCI quirks.
1016
Christoph Lameter41ecc552007-05-09 02:32:44 -07001017config SLUB_DEBUG
1018 default y
1019 bool "Enable SLUB debugging support" if EMBEDDED
Christoph Lameterf6acb632008-04-29 16:16:06 -07001020 depends on SLUB && SYSFS
Christoph Lameter41ecc552007-05-09 02:32:44 -07001021 help
1022 SLUB has extensive debug support features. Disabling these can
1023 result in significant savings in code size. This also disables
1024 SLUB sysfs support. /sys/slab will not exist and there will be
1025 no support for cache validation etc.
1026
Randy Dunlapb943c462009-03-10 12:55:46 -07001027config COMPAT_BRK
1028 bool "Disable heap randomization"
1029 default y
1030 help
1031 Randomizing heap placement makes heap exploits harder, but it
1032 also breaks ancient binaries (including anything libc5 based).
1033 This option changes the bootup default to heap randomization
Matt LaPlante692105b2009-01-26 11:12:25 +01001034 disabled, and can be overridden at runtime by setting
Randy Dunlapb943c462009-03-10 12:55:46 -07001035 /proc/sys/kernel/randomize_va_space to 2.
1036
1037 On non-ancient distros (post-2000 ones) N is usually a safe choice.
1038
Christoph Lameter81819f02007-05-06 14:49:36 -07001039choice
1040 prompt "Choose SLAB allocator"
Christoph Lametera0acd822007-07-17 04:03:32 -07001041 default SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -07001042 help
1043 This option allows to select a slab allocator.
1044
1045config SLAB
1046 bool "SLAB"
1047 help
1048 The regular slab allocator that is established and known to work
Christoph Lameter34013882007-05-09 02:32:47 -07001049 well in all environments. It organizes cache hot objects in
Simon Arlott02f56212008-11-05 22:18:19 +00001050 per cpu and per node queues.
Christoph Lameter81819f02007-05-06 14:49:36 -07001051
1052config SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -07001053 bool "SLUB (Unqueued Allocator)"
1054 help
1055 SLUB is a slab allocator that minimizes cache line usage
1056 instead of managing queues of cached objects (SLAB approach).
1057 Per cpu caching is realized using slabs of objects instead
1058 of queues of objects. SLUB can use memory efficiently
Simon Arlott02f56212008-11-05 22:18:19 +00001059 and has enhanced diagnostics. SLUB is the default choice for
1060 a slab allocator.
Christoph Lameter81819f02007-05-06 14:49:36 -07001061
1062config SLOB
Paul Mundt84a01c22007-07-15 23:38:24 -07001063 depends on EMBEDDED
Christoph Lameter81819f02007-05-06 14:49:36 -07001064 bool "SLOB (Simple Allocator)"
1065 help
Matt Mackall37291452008-02-04 22:29:38 -08001066 SLOB replaces the stock allocator with a drastically simpler
1067 allocator. SLOB is generally more space efficient but
1068 does not perform as well on large systems.
Christoph Lameter81819f02007-05-06 14:49:36 -07001069
1070endchoice
1071
Mathieu Desnoyers125e5642008-02-02 15:10:36 -05001072config PROFILING
1073 bool "Profiling support (EXPERIMENTAL)"
1074 help
1075 Say Y here to enable the extended profiling support mechanisms used
1076 by profilers such as OProfile.
1077
Ingo Molnar5f87f112008-07-23 14:15:22 +02001078#
1079# Place an empty function call at each tracepoint site. Can be
1080# dynamically changed for a probe function.
1081#
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -04001082config TRACEPOINTS
Ingo Molnar5f87f112008-07-23 14:15:22 +02001083 bool
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -04001084
Mathieu Desnoyersfb32e032008-02-02 15:10:33 -05001085source "arch/Kconfig"
1086
David Howells07fe7cb2009-04-03 16:42:35 +01001087config SLOW_WORK
1088 default n
David Howells1c2d0082009-04-06 15:47:25 +01001089 bool
David Howells07fe7cb2009-04-03 16:42:35 +01001090 help
1091 The slow work thread pool provides a number of dynamically allocated
1092 threads that can be used by the kernel to perform operations that
1093 take a relatively long time.
1094
1095 An example of this would be CacheFiles doing a path lookup followed
1096 by a series of mkdirs and a create call, all of which have to touch
1097 disk.
1098
David Howells1c2d0082009-04-06 15:47:25 +01001099 See Documentation/slow-work.txt.
1100
David Howellsf13a48b2009-12-01 15:36:11 +00001101config SLOW_WORK_DEBUG
1102 bool "Slow work debugging through debugfs"
David Howells8fba10a2009-11-19 18:10:51 +00001103 default n
David Howellsf13a48b2009-12-01 15:36:11 +00001104 depends on SLOW_WORK && DEBUG_FS
David Howells8fba10a2009-11-19 18:10:51 +00001105 help
David Howellsf13a48b2009-12-01 15:36:11 +00001106 Display the contents of the slow work run queue through debugfs,
David Howells8fba10a2009-11-19 18:10:51 +00001107 including items currently executing.
1108
1109 See Documentation/slow-work.txt.
1110
Linus Torvalds1da177e2005-04-16 15:20:36 -07001111endmenu # General setup
1112
Dmitry Baryshkovee7e5512008-06-29 14:18:46 +04001113config HAVE_GENERIC_DMA_COHERENT
1114 bool
1115 default n
1116
Linus Torvalds158a9622008-01-02 13:04:48 -08001117config SLABINFO
1118 bool
1119 depends on PROC_FS
Christoph Lameter0f389ec2008-04-14 18:53:02 +03001120 depends on SLAB || SLUB_DEBUG
Linus Torvalds158a9622008-01-02 13:04:48 -08001121 default y
1122
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001123config RT_MUTEXES
1124 boolean
Chuck Ebbertae81f9e2006-09-16 12:15:53 -07001125
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126config BASE_SMALL
1127 int
1128 default 0 if BASE_FULL
1129 default 1 if !BASE_FULL
1130
Jan Engelhardt66da5732007-07-15 23:39:29 -07001131menuconfig MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001132 bool "Enable loadable module support"
1133 help
1134 Kernel modules are small pieces of compiled code which can
1135 be inserted in the running kernel, rather than being
1136 permanently built into the kernel. You use the "modprobe"
1137 tool to add (and sometimes remove) them. If you say Y here,
1138 many parts of the kernel can be built as modules (by
1139 answering M instead of Y where indicated): this is most
1140 useful for infrequently used options which are not required
1141 for booting. For more information, see the man pages for
1142 modprobe, lsmod, modinfo, insmod and rmmod.
1143
1144 If you say Y here, you will need to run "make
1145 modules_install" to put the modules under /lib/modules/
1146 where modprobe can find them (you may need to be root to do
1147 this).
1148
1149 If unsure, say Y.
1150
Robert P. J. Day0b0de142008-08-04 13:31:32 -04001151if MODULES
1152
Linus Torvalds826e4502008-05-04 17:04:16 -07001153config MODULE_FORCE_LOAD
1154 bool "Forced module loading"
Linus Torvalds826e4502008-05-04 17:04:16 -07001155 default n
1156 help
Rusty Russell91e37a72008-05-09 16:25:28 +10001157 Allow loading of modules without version information (ie. modprobe
1158 --force). Forced module loading sets the 'F' (forced) taint flag and
1159 is usually a really bad idea.
Linus Torvalds826e4502008-05-04 17:04:16 -07001160
Linus Torvalds1da177e2005-04-16 15:20:36 -07001161config MODULE_UNLOAD
1162 bool "Module unloading"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001163 help
1164 Without this option you will not be able to unload any
1165 modules (note that some modules may not be unloadable
Denys Vlasenkof7f5b672008-07-22 19:24:26 -05001166 anyway), which makes your kernel smaller, faster
1167 and simpler. If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001168
1169config MODULE_FORCE_UNLOAD
1170 bool "Forced module unloading"
1171 depends on MODULE_UNLOAD && EXPERIMENTAL
1172 help
1173 This option allows you to force a module to unload, even if the
1174 kernel believes it is unsafe: the kernel will remove the module
1175 without waiting for anyone to stop using it (using the -f option to
1176 rmmod). This is mainly for kernel developers and desperate users.
1177 If unsure, say N.
1178
Linus Torvalds1da177e2005-04-16 15:20:36 -07001179config MODVERSIONS
Sam Ravnborg0d541642005-12-26 23:04:02 +01001180 bool "Module versioning support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181 help
1182 Usually, you have to use modules compiled with your kernel.
1183 Saying Y here makes it sometimes possible to use modules
1184 compiled for different kernels, by adding enough information
1185 to the modules to (hopefully) spot any changes which would
1186 make them incompatible with the kernel you are running. If
1187 unsure, say N.
1188
1189config MODULE_SRCVERSION_ALL
1190 bool "Source checksum for all modules"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001191 help
1192 Modules which contain a MODULE_VERSION get an extra "srcversion"
1193 field inserted into their modinfo section, which contains a
1194 sum of the source files which made it. This helps maintainers
1195 see exactly which source was used to build a module (since
1196 others sometimes change the module source without updating
1197 the version). With this option, such a "srcversion" field
1198 will be created for all modules. If unsure, say N.
1199
Robert P. J. Day0b0de142008-08-04 13:31:32 -04001200endif # MODULES
1201
Rusty Russell98a79d62008-12-13 21:19:41 +10301202config INIT_ALL_POSSIBLE
1203 bool
1204 help
1205 Back when each arch used to define their own cpu_online_map and
1206 cpu_possible_map, some of them chose to initialize cpu_possible_map
1207 with all 1s, and others with all 0s. When they were centralised,
1208 it was better to provide this option than to break all the archs
Matt LaPlante692105b2009-01-26 11:12:25 +01001209 and have several arch maintainers pursuing me down dark alleys.
Rusty Russell98a79d62008-12-13 21:19:41 +10301210
Linus Torvalds1da177e2005-04-16 15:20:36 -07001211config STOP_MACHINE
1212 bool
1213 default y
1214 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
1215 help
1216 Need stop_machine() primitive.
Jens Axboe3a65dfe2005-11-04 08:43:35 +01001217
Jens Axboe3a65dfe2005-11-04 08:43:35 +01001218source "block/Kconfig"
Avi Kivitye98c3202007-10-16 23:27:31 -07001219
1220config PREEMPT_NOTIFIERS
1221 bool
Paul E. McKenneye260be62008-01-25 21:08:24 +01001222