blob: 7224c4099a2820cd8e03b5589fa20e1eeb83b0a6 [file] [log] [blame]
Andy Fleming00db8182005-07-30 19:31:23 -04001/*
2 * include/linux/phy.h
3 *
4 * Framework and drivers for configuring and reading different PHYs
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#ifndef __PHY_H
19#define __PHY_H
20
21#include <linux/spinlock.h>
22#include <linux/device.h>
Maciej W. Rozycki13df29f2006-10-03 16:18:28 +010023#include <linux/ethtool.h>
24#include <linux/mii.h>
25#include <linux/timer.h>
26#include <linux/workqueue.h>
Andy Fleming00db8182005-07-30 19:31:23 -040027
Maciej W. Rozycki0ac49522007-09-28 22:42:14 -070028#include <asm/atomic.h>
29
Andy Fleming00db8182005-07-30 19:31:23 -040030#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
31 SUPPORTED_10baseT_Full | \
32 SUPPORTED_100baseT_Half | \
33 SUPPORTED_100baseT_Full | \
34 SUPPORTED_Autoneg | \
35 SUPPORTED_TP | \
36 SUPPORTED_MII)
37
38#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
39 SUPPORTED_1000baseT_Half | \
40 SUPPORTED_1000baseT_Full)
41
Andy Flemingc5e38a92008-04-09 19:38:27 -050042/*
43 * Set phydev->irq to PHY_POLL if interrupts are not supported,
Andy Fleming00db8182005-07-30 19:31:23 -040044 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
45 * the attached driver handles the interrupt
46 */
47#define PHY_POLL -1
48#define PHY_IGNORE_INTERRUPT -2
49
50#define PHY_HAS_INTERRUPT 0x00000001
51#define PHY_HAS_MAGICANEG 0x00000002
52
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060053/* Interface Mode definitions */
54typedef enum {
55 PHY_INTERFACE_MODE_MII,
56 PHY_INTERFACE_MODE_GMII,
57 PHY_INTERFACE_MODE_SGMII,
58 PHY_INTERFACE_MODE_TBI,
59 PHY_INTERFACE_MODE_RMII,
60 PHY_INTERFACE_MODE_RGMII,
Kim Phillipsa9995892007-04-13 01:25:57 -050061 PHY_INTERFACE_MODE_RGMII_ID,
Kim Phillips7d400a42007-11-26 16:17:48 -060062 PHY_INTERFACE_MODE_RGMII_RXID,
63 PHY_INTERFACE_MODE_RGMII_TXID,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060064 PHY_INTERFACE_MODE_RTBI
65} phy_interface_t;
66
Andy Fleming00db8182005-07-30 19:31:23 -040067
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060068#define PHY_INIT_TIMEOUT 100000
Andy Fleming00db8182005-07-30 19:31:23 -040069#define PHY_STATE_TIME 1
70#define PHY_FORCE_TIMEOUT 10
71#define PHY_AN_TIMEOUT 10
72
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060073#define PHY_MAX_ADDR 32
Andy Fleming00db8182005-07-30 19:31:23 -040074
Kumar Galaa4d00f12006-01-11 11:27:33 -080075/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
Andy Fleming9d9326d2008-04-09 19:38:13 -050076#define PHY_ID_FMT "%s:%02x"
77
78/*
79 * Need to be a little smaller than phydev->dev.bus_id to leave room
80 * for the ":%02x"
81 */
82#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3)
Kumar Galaa4d00f12006-01-11 11:27:33 -080083
Andy Flemingc5e38a92008-04-09 19:38:27 -050084/*
85 * The Bus class for PHYs. Devices which provide access to
86 * PHYs should register using this structure
87 */
Andy Fleming00db8182005-07-30 19:31:23 -040088struct mii_bus {
89 const char *name;
Andy Fleming9d9326d2008-04-09 19:38:13 -050090 char id[MII_BUS_ID_SIZE];
Andy Fleming00db8182005-07-30 19:31:23 -040091 void *priv;
92 int (*read)(struct mii_bus *bus, int phy_id, int regnum);
93 int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
94 int (*reset)(struct mii_bus *bus);
95
Andy Flemingc5e38a92008-04-09 19:38:27 -050096 /*
97 * A lock to ensure that only one thing can read/write
98 * the MDIO bus at a time
99 */
Nate Case35b5f6b2008-01-29 10:05:09 -0600100 struct mutex mdio_lock;
Andy Fleming00db8182005-07-30 19:31:23 -0400101
102 struct device *dev;
103
104 /* list of all PHYs on bus */
105 struct phy_device *phy_map[PHY_MAX_ADDR];
106
Matt Porterf8964242005-11-02 16:13:06 -0700107 /* Phy addresses to be ignored when probing */
108 u32 phy_mask;
109
Andy Flemingc5e38a92008-04-09 19:38:27 -0500110 /*
111 * Pointer to an array of interrupts, each PHY's
112 * interrupt at the index matching its address
113 */
Andy Fleming00db8182005-07-30 19:31:23 -0400114 int *irq;
115};
116
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600117#define PHY_INTERRUPT_DISABLED 0x0
118#define PHY_INTERRUPT_ENABLED 0x80000000
Andy Fleming00db8182005-07-30 19:31:23 -0400119
120/* PHY state machine states:
121 *
122 * DOWN: PHY device and driver are not ready for anything. probe
123 * should be called if and only if the PHY is in this state,
124 * given that the PHY device exists.
125 * - PHY driver probe function will, depending on the PHY, set
126 * the state to STARTING or READY
127 *
128 * STARTING: PHY device is coming up, and the ethernet driver is
129 * not ready. PHY drivers may set this in the probe function.
130 * If they do, they are responsible for making sure the state is
131 * eventually set to indicate whether the PHY is UP or READY,
132 * depending on the state when the PHY is done starting up.
133 * - PHY driver will set the state to READY
134 * - start will set the state to PENDING
135 *
136 * READY: PHY is ready to send and receive packets, but the
137 * controller is not. By default, PHYs which do not implement
138 * probe will be set to this state by phy_probe(). If the PHY
139 * driver knows the PHY is ready, and the PHY state is STARTING,
140 * then it sets this STATE.
141 * - start will set the state to UP
142 *
143 * PENDING: PHY device is coming up, but the ethernet driver is
144 * ready. phy_start will set this state if the PHY state is
145 * STARTING.
146 * - PHY driver will set the state to UP when the PHY is ready
147 *
148 * UP: The PHY and attached device are ready to do work.
149 * Interrupts should be started here.
150 * - timer moves to AN
151 *
152 * AN: The PHY is currently negotiating the link state. Link is
153 * therefore down for now. phy_timer will set this state when it
154 * detects the state is UP. config_aneg will set this state
155 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
156 * - If autonegotiation finishes, but there's no link, it sets
157 * the state to NOLINK.
158 * - If aneg finishes with link, it sets the state to RUNNING,
159 * and calls adjust_link
160 * - If autonegotiation did not finish after an arbitrary amount
161 * of time, autonegotiation should be tried again if the PHY
162 * supports "magic" autonegotiation (back to AN)
163 * - If it didn't finish, and no magic_aneg, move to FORCING.
164 *
165 * NOLINK: PHY is up, but not currently plugged in.
166 * - If the timer notes that the link comes back, we move to RUNNING
167 * - config_aneg moves to AN
168 * - phy_stop moves to HALTED
169 *
170 * FORCING: PHY is being configured with forced settings
171 * - if link is up, move to RUNNING
172 * - If link is down, we drop to the next highest setting, and
173 * retry (FORCING) after a timeout
174 * - phy_stop moves to HALTED
175 *
176 * RUNNING: PHY is currently up, running, and possibly sending
177 * and/or receiving packets
178 * - timer will set CHANGELINK if we're polling (this ensures the
179 * link state is polled every other cycle of this state machine,
180 * which makes it every other second)
181 * - irq will set CHANGELINK
182 * - config_aneg will set AN
183 * - phy_stop moves to HALTED
184 *
185 * CHANGELINK: PHY experienced a change in link state
186 * - timer moves to RUNNING if link
187 * - timer moves to NOLINK if the link is down
188 * - phy_stop moves to HALTED
189 *
190 * HALTED: PHY is up, but no polling or interrupts are done. Or
191 * PHY is in an error state.
192 *
193 * - phy_start moves to RESUMING
194 *
195 * RESUMING: PHY was halted, but now wants to run again.
196 * - If we are forcing, or aneg is done, timer moves to RUNNING
197 * - If aneg is not done, timer moves to AN
198 * - phy_stop moves to HALTED
199 */
200enum phy_state {
201 PHY_DOWN=0,
202 PHY_STARTING,
203 PHY_READY,
204 PHY_PENDING,
205 PHY_UP,
206 PHY_AN,
207 PHY_RUNNING,
208 PHY_NOLINK,
209 PHY_FORCING,
210 PHY_CHANGELINK,
211 PHY_HALTED,
212 PHY_RESUMING
213};
214
215/* phy_device: An instance of a PHY
216 *
217 * drv: Pointer to the driver for this PHY instance
218 * bus: Pointer to the bus this PHY is on
219 * dev: driver model device structure for this PHY
220 * phy_id: UID for this device found during discovery
221 * state: state of the PHY for management purposes
222 * dev_flags: Device-specific flags used by the PHY driver.
223 * addr: Bus address of PHY
224 * link_timeout: The number of timer firings to wait before the
225 * giving up on the current attempt at acquiring a link
226 * irq: IRQ number of the PHY's interrupt (-1 if none)
227 * phy_timer: The timer for handling the state machine
228 * phy_queue: A work_queue for the interrupt
229 * attached_dev: The attached enet driver's device instance ptr
230 * adjust_link: Callback for the enet controller to respond to
231 * changes in the link state.
232 * adjust_state: Callback for the enet driver to respond to
233 * changes in the state machine.
234 *
235 * speed, duplex, pause, supported, advertising, and
236 * autoneg are used like in mii_if_info
237 *
238 * interrupts currently only supports enabled or disabled,
239 * but could be changed in the future to support enabling
240 * and disabling specific interrupts
241 *
242 * Contains some infrastructure for polling and interrupt
243 * handling, as well as handling shifts in PHY hardware state
244 */
245struct phy_device {
246 /* Information about the PHY type */
247 /* And management functions */
248 struct phy_driver *drv;
249
250 struct mii_bus *bus;
251
252 struct device dev;
253
254 u32 phy_id;
255
256 enum phy_state state;
257
258 u32 dev_flags;
259
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600260 phy_interface_t interface;
261
Andy Fleming00db8182005-07-30 19:31:23 -0400262 /* Bus address of the PHY (0-32) */
263 int addr;
264
Andy Flemingc5e38a92008-04-09 19:38:27 -0500265 /*
266 * forced speed & duplex (no autoneg)
Andy Fleming00db8182005-07-30 19:31:23 -0400267 * partner speed & duplex & pause (autoneg)
268 */
269 int speed;
270 int duplex;
271 int pause;
272 int asym_pause;
273
274 /* The most recently read link state */
275 int link;
276
277 /* Enabled Interrupts */
278 u32 interrupts;
279
280 /* Union of PHY and Attached devices' supported modes */
281 /* See mii.h for more info */
282 u32 supported;
283 u32 advertising;
284
285 int autoneg;
286
287 int link_timeout;
288
Andy Flemingc5e38a92008-04-09 19:38:27 -0500289 /*
290 * Interrupt number for this PHY
291 * -1 means no interrupt
292 */
Andy Fleming00db8182005-07-30 19:31:23 -0400293 int irq;
294
295 /* private data pointer */
296 /* For use by PHYs to maintain extra state */
297 void *priv;
298
299 /* Interrupt and Polling infrastructure */
300 struct work_struct phy_queue;
Nate Case35b5f6b2008-01-29 10:05:09 -0600301 struct work_struct state_queue;
Andy Fleming00db8182005-07-30 19:31:23 -0400302 struct timer_list phy_timer;
Maciej W. Rozycki0ac49522007-09-28 22:42:14 -0700303 atomic_t irq_disable;
Andy Fleming00db8182005-07-30 19:31:23 -0400304
Nate Case35b5f6b2008-01-29 10:05:09 -0600305 struct mutex lock;
Andy Fleming00db8182005-07-30 19:31:23 -0400306
307 struct net_device *attached_dev;
308
309 void (*adjust_link)(struct net_device *dev);
310
311 void (*adjust_state)(struct net_device *dev);
312};
313#define to_phy_device(d) container_of(d, struct phy_device, dev)
314
315/* struct phy_driver: Driver structure for a particular PHY type
316 *
317 * phy_id: The result of reading the UID registers of this PHY
318 * type, and ANDing them with the phy_id_mask. This driver
319 * only works for PHYs with IDs which match this field
320 * name: The friendly name of this PHY type
321 * phy_id_mask: Defines the important bits of the phy_id
322 * features: A list of features (speed, duplex, etc) supported
323 * by this PHY
324 * flags: A bitfield defining certain other features this PHY
325 * supports (like interrupts)
326 *
327 * The drivers must implement config_aneg and read_status. All
328 * other functions are optional. Note that none of these
329 * functions should be called from interrupt time. The goal is
330 * for the bus read/write functions to be able to block when the
331 * bus transaction is happening, and be freed up by an interrupt
332 * (The MPC85xx has this ability, though it is not currently
333 * supported in the driver).
334 */
335struct phy_driver {
336 u32 phy_id;
337 char *name;
338 unsigned int phy_id_mask;
339 u32 features;
340 u32 flags;
341
Andy Flemingc5e38a92008-04-09 19:38:27 -0500342 /*
343 * Called to initialize the PHY,
344 * including after a reset
345 */
Andy Fleming00db8182005-07-30 19:31:23 -0400346 int (*config_init)(struct phy_device *phydev);
347
Andy Flemingc5e38a92008-04-09 19:38:27 -0500348 /*
349 * Called during discovery. Used to set
350 * up device-specific structures, if any
351 */
Andy Fleming00db8182005-07-30 19:31:23 -0400352 int (*probe)(struct phy_device *phydev);
353
354 /* PHY Power Management */
355 int (*suspend)(struct phy_device *phydev);
356 int (*resume)(struct phy_device *phydev);
357
Andy Flemingc5e38a92008-04-09 19:38:27 -0500358 /*
359 * Configures the advertisement and resets
Andy Fleming00db8182005-07-30 19:31:23 -0400360 * autonegotiation if phydev->autoneg is on,
361 * forces the speed to the current settings in phydev
Andy Flemingc5e38a92008-04-09 19:38:27 -0500362 * if phydev->autoneg is off
363 */
Andy Fleming00db8182005-07-30 19:31:23 -0400364 int (*config_aneg)(struct phy_device *phydev);
365
366 /* Determines the negotiated speed and duplex */
367 int (*read_status)(struct phy_device *phydev);
368
369 /* Clears any pending interrupts */
370 int (*ack_interrupt)(struct phy_device *phydev);
371
372 /* Enables or disables interrupts */
373 int (*config_intr)(struct phy_device *phydev);
374
375 /* Clears up any memory if needed */
376 void (*remove)(struct phy_device *phydev);
377
378 struct device_driver driver;
379};
380#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
381
Andy Flemingf62220d2008-04-18 17:29:54 -0500382#define PHY_ANY_ID "MATCH ANY PHY"
383#define PHY_ANY_UID 0xffffffff
384
385/* A Structure for boards to register fixups with the PHY Lib */
386struct phy_fixup {
387 struct list_head list;
388 char bus_id[BUS_ID_SIZE];
389 u32 phy_uid;
390 u32 phy_uid_mask;
391 int (*run)(struct phy_device *phydev);
392};
393
Andy Fleming00db8182005-07-30 19:31:23 -0400394int phy_read(struct phy_device *phydev, u16 regnum);
395int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
Paul Gortmakercac1f3c2008-04-15 12:49:21 -0400396int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
Andy Fleming00db8182005-07-30 19:31:23 -0400397struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
398int phy_clear_interrupt(struct phy_device *phydev);
399int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
Andy Fleminge1393452005-08-24 18:46:21 -0500400struct phy_device * phy_attach(struct net_device *dev,
Andy Flemingf62220d2008-04-18 17:29:54 -0500401 const char *bus_id, u32 flags, phy_interface_t interface);
402struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600403 void (*handler)(struct net_device *), u32 flags,
404 phy_interface_t interface);
Andy Fleminge1393452005-08-24 18:46:21 -0500405void phy_disconnect(struct phy_device *phydev);
406void phy_detach(struct phy_device *phydev);
407void phy_start(struct phy_device *phydev);
408void phy_stop(struct phy_device *phydev);
409int phy_start_aneg(struct phy_device *phydev);
410
411int mdiobus_register(struct mii_bus *bus);
412void mdiobus_unregister(struct mii_bus *bus);
413void phy_sanitize_settings(struct phy_device *phydev);
414int phy_stop_interrupts(struct phy_device *phydev);
Andy Fleming9b9a8bf2008-05-02 13:00:51 -0500415int phy_enable_interrupts(struct phy_device *phydev);
416int phy_disable_interrupts(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400417
418static inline int phy_read_status(struct phy_device *phydev) {
419 return phydev->drv->read_status(phydev);
420}
421
Andy Fleminge1393452005-08-24 18:46:21 -0500422int genphy_config_advert(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400423int genphy_setup_forced(struct phy_device *phydev);
424int genphy_restart_aneg(struct phy_device *phydev);
425int genphy_config_aneg(struct phy_device *phydev);
426int genphy_update_link(struct phy_device *phydev);
427int genphy_read_status(struct phy_device *phydev);
428void phy_driver_unregister(struct phy_driver *drv);
429int phy_driver_register(struct phy_driver *new_driver);
430void phy_prepare_link(struct phy_device *phydev,
431 void (*adjust_link)(struct net_device *));
432void phy_start_machine(struct phy_device *phydev,
433 void (*handler)(struct net_device *));
434void phy_stop_machine(struct phy_device *phydev);
435int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
436int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
437int phy_mii_ioctl(struct phy_device *phydev,
438 struct mii_ioctl_data *mii_data, int cmd);
Andy Fleminge1393452005-08-24 18:46:21 -0500439int phy_start_interrupts(struct phy_device *phydev);
440void phy_print_status(struct phy_device *phydev);
Vitaly Bordug11b0bac2006-08-14 23:00:29 -0700441struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
Anton Vorontsov6f4a7f42007-12-04 16:17:33 +0300442void phy_device_free(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400443
Andy Flemingf62220d2008-04-18 17:29:54 -0500444int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
445 int (*run)(struct phy_device *));
446int phy_register_fixup_for_id(const char *bus_id,
447 int (*run)(struct phy_device *));
448int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
449 int (*run)(struct phy_device *));
450int phy_scan_fixups(struct phy_device *phydev);
451
Andy Fleming9b9a8bf2008-05-02 13:00:51 -0500452int __init mdio_bus_init(void);
453void mdio_bus_exit(void);
454
Andy Fleming00db8182005-07-30 19:31:23 -0400455extern struct bus_type mdio_bus_type;
Andy Fleming00db8182005-07-30 19:31:23 -0400456#endif /* __PHY_H */