blob: a7c0cc3203cba461c6a243e11af710d9fbcf7354 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# File system configuration
3#
4
5menu "File systems"
6
7config EXT2_FS
8 tristate "Second extended fs support"
9 help
10 Ext2 is a standard Linux file system for hard disks.
11
12 To compile this file system support as a module, choose M here: the
13 module will be called ext2. Be aware however that the file system
14 of your root partition (the one containing the directory /) cannot
15 be compiled as a module, and so this could be dangerous.
16
17 If unsure, say Y.
18
19config EXT2_FS_XATTR
20 bool "Ext2 extended attributes"
21 depends on EXT2_FS
22 help
23 Extended attributes are name:value pairs associated with inodes by
24 the kernel or by users (see the attr(5) manual page, or visit
25 <http://acl.bestbits.at/> for details).
26
27 If unsure, say N.
28
29config EXT2_FS_POSIX_ACL
30 bool "Ext2 POSIX Access Control Lists"
31 depends on EXT2_FS_XATTR
32 help
33 Posix Access Control Lists (ACLs) support permissions for users and
34 groups beyond the owner/group/world scheme.
35
36 To learn more about Access Control Lists, visit the Posix ACLs for
37 Linux website <http://acl.bestbits.at/>.
38
39 If you don't know what Access Control Lists are, say N
40
41config EXT2_FS_SECURITY
42 bool "Ext2 Security Labels"
43 depends on EXT2_FS_XATTR
44 help
45 Security labels support alternative access control models
46 implemented by security modules like SELinux. This option
47 enables an extended attribute handler for file security
48 labels in the ext2 filesystem.
49
50 If you are not using a security module that requires using
51 extended attributes for file security labels, say N.
52
53config EXT3_FS
54 tristate "Ext3 journalling file system support"
55 help
56 This is the journaling version of the Second extended file system
57 (often called ext3), the de facto standard Linux file system
58 (method to organize files on a storage device) for hard disks.
59
60 The journaling code included in this driver means you do not have
61 to run e2fsck (file system checker) on your file systems after a
62 crash. The journal keeps track of any changes that were being made
63 at the time the system crashed, and can ensure that your file system
64 is consistent without the need for a lengthy check.
65
66 Other than adding the journal to the file system, the on-disk format
67 of ext3 is identical to ext2. It is possible to freely switch
68 between using the ext3 driver and the ext2 driver, as long as the
69 file system has been cleanly unmounted, or e2fsck is run on the file
70 system.
71
72 To add a journal on an existing ext2 file system or change the
73 behavior of ext3 file systems, you can use the tune2fs utility ("man
74 tune2fs"). To modify attributes of files and directories on ext3
75 file systems, use chattr ("man chattr"). You need to be using
76 e2fsprogs version 1.20 or later in order to create ext3 journals
77 (available at <http://sourceforge.net/projects/e2fsprogs/>).
78
79 To compile this file system support as a module, choose M here: the
80 module will be called ext3. Be aware however that the file system
81 of your root partition (the one containing the directory /) cannot
82 be compiled as a module, and so this may be dangerous.
83
84config EXT3_FS_XATTR
85 bool "Ext3 extended attributes"
86 depends on EXT3_FS
87 default y
88 help
89 Extended attributes are name:value pairs associated with inodes by
90 the kernel or by users (see the attr(5) manual page, or visit
91 <http://acl.bestbits.at/> for details).
92
93 If unsure, say N.
94
95 You need this for POSIX ACL support on ext3.
96
97config EXT3_FS_POSIX_ACL
98 bool "Ext3 POSIX Access Control Lists"
99 depends on EXT3_FS_XATTR
100 help
101 Posix Access Control Lists (ACLs) support permissions for users and
102 groups beyond the owner/group/world scheme.
103
104 To learn more about Access Control Lists, visit the Posix ACLs for
105 Linux website <http://acl.bestbits.at/>.
106
107 If you don't know what Access Control Lists are, say N
108
109config EXT3_FS_SECURITY
110 bool "Ext3 Security Labels"
111 depends on EXT3_FS_XATTR
112 help
113 Security labels support alternative access control models
114 implemented by security modules like SELinux. This option
115 enables an extended attribute handler for file security
116 labels in the ext3 filesystem.
117
118 If you are not using a security module that requires using
119 extended attributes for file security labels, say N.
120
121config JBD
122# CONFIG_JBD could be its own option (even modular), but until there are
123# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
124# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
125 tristate
126 default EXT3_FS
127 help
128 This is a generic journaling layer for block devices. It is
129 currently used by the ext3 file system, but it could also be used to
130 add journal support to other file systems or block devices such as
131 RAID or LVM.
132
133 If you are using the ext3 file system, you need to say Y here. If
134 you are not using ext3 then you will probably want to say N.
135
136 To compile this device as a module, choose M here: the module will be
137 called jbd. If you are compiling ext3 into the kernel, you cannot
138 compile this code as a module.
139
140config JBD_DEBUG
141 bool "JBD (ext3) debugging support"
142 depends on JBD
143 help
144 If you are using the ext3 journaled file system (or potentially any
145 other file system/device using JBD), this option allows you to
146 enable debugging output while the system is running, in order to
147 help track down any problems you are having. By default the
148 debugging output will be turned off.
149
150 If you select Y here, then you will be able to turn on debugging
151 with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
152 1 and 5, the higher the number, the more debugging output is
153 generated. To turn debugging off again, do
154 "echo 0 > /proc/sys/fs/jbd-debug".
155
156config FS_MBCACHE
157# Meta block cache for Extended Attributes (ext2/ext3)
158 tristate
159 depends on EXT2_FS_XATTR || EXT3_FS_XATTR
160 default y if EXT2_FS=y || EXT3_FS=y
161 default m if EXT2_FS=m || EXT3_FS=m
162
163config REISERFS_FS
164 tristate "Reiserfs support"
165 help
166 Stores not just filenames but the files themselves in a balanced
167 tree. Uses journaling.
168
169 Balanced trees are more efficient than traditional file system
170 architectural foundations.
171
172 In general, ReiserFS is as fast as ext2, but is very efficient with
173 large directories and small files. Additional patches are needed
174 for NFS and quotas, please see <http://www.namesys.com/> for links.
175
176 It is more easily extended to have features currently found in
177 database and keyword search systems than block allocation based file
178 systems are. The next version will be so extended, and will support
179 plugins consistent with our motto ``It takes more than a license to
180 make source code open.''
181
182 Read <http://www.namesys.com/> to learn more about reiserfs.
183
184 Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
185
186 If you like it, you can pay us to add new features to it that you
187 need, buy a support contract, or pay us to port it to another OS.
188
189config REISERFS_CHECK
190 bool "Enable reiserfs debug mode"
191 depends on REISERFS_FS
192 help
193 If you set this to Y, then ReiserFS will perform every check it can
194 possibly imagine of its internal consistency throughout its
195 operation. It will also go substantially slower. More than once we
196 have forgotten that this was on, and then gone despondent over the
197 latest benchmarks.:-) Use of this option allows our team to go all
198 out in checking for consistency when debugging without fear of its
199 effect on end users. If you are on the verge of sending in a bug
200 report, say Y and you might get a useful error message. Almost
201 everyone should say N.
202
203config REISERFS_PROC_INFO
204 bool "Stats in /proc/fs/reiserfs"
205 depends on REISERFS_FS
206 help
207 Create under /proc/fs/reiserfs a hierarchy of files, displaying
208 various ReiserFS statistics and internal data at the expense of
209 making your kernel or module slightly larger (+8 KB). This also
210 increases the amount of kernel memory required for each mount.
211 Almost everyone but ReiserFS developers and people fine-tuning
212 reiserfs or tracing problems should say N.
213
214config REISERFS_FS_XATTR
215 bool "ReiserFS extended attributes"
216 depends on REISERFS_FS
217 help
218 Extended attributes are name:value pairs associated with inodes by
219 the kernel or by users (see the attr(5) manual page, or visit
220 <http://acl.bestbits.at/> for details).
221
222 If unsure, say N.
223
224config REISERFS_FS_POSIX_ACL
225 bool "ReiserFS POSIX Access Control Lists"
226 depends on REISERFS_FS_XATTR
227 help
228 Posix Access Control Lists (ACLs) support permissions for users and
229 groups beyond the owner/group/world scheme.
230
231 To learn more about Access Control Lists, visit the Posix ACLs for
232 Linux website <http://acl.bestbits.at/>.
233
234 If you don't know what Access Control Lists are, say N
235
236config REISERFS_FS_SECURITY
237 bool "ReiserFS Security Labels"
238 depends on REISERFS_FS_XATTR
239 help
240 Security labels support alternative access control models
241 implemented by security modules like SELinux. This option
242 enables an extended attribute handler for file security
243 labels in the ReiserFS filesystem.
244
245 If you are not using a security module that requires using
246 extended attributes for file security labels, say N.
247
248config JFS_FS
249 tristate "JFS filesystem support"
250 select NLS
251 help
252 This is a port of IBM's Journaled Filesystem . More information is
253 available in the file <file:Documentation/filesystems/jfs.txt>.
254
255 If you do not intend to use the JFS filesystem, say N.
256
257config JFS_POSIX_ACL
258 bool "JFS POSIX Access Control Lists"
259 depends on JFS_FS
260 help
261 Posix Access Control Lists (ACLs) support permissions for users and
262 groups beyond the owner/group/world scheme.
263
264 To learn more about Access Control Lists, visit the Posix ACLs for
265 Linux website <http://acl.bestbits.at/>.
266
267 If you don't know what Access Control Lists are, say N
268
269config JFS_SECURITY
270 bool "JFS Security Labels"
271 depends on JFS_FS
272 help
273 Security labels support alternative access control models
274 implemented by security modules like SELinux. This option
275 enables an extended attribute handler for file security
276 labels in the jfs filesystem.
277
278 If you are not using a security module that requires using
279 extended attributes for file security labels, say N.
280
281config JFS_DEBUG
282 bool "JFS debugging"
283 depends on JFS_FS
284 help
285 If you are experiencing any problems with the JFS filesystem, say
286 Y here. This will result in additional debugging messages to be
287 written to the system log. Under normal circumstances, this
288 results in very little overhead.
289
290config JFS_STATISTICS
291 bool "JFS statistics"
292 depends on JFS_FS
293 help
294 Enabling this option will cause statistics from the JFS file system
295 to be made available to the user in the /proc/fs/jfs/ directory.
296
297config FS_POSIX_ACL
298# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs)
299#
300# NOTE: you can implement Posix ACLs without these helpers (XFS does).
301# Never use this symbol for ifdefs.
302#
303 bool
304 depends on EXT2_FS_POSIX_ACL || EXT3_FS_POSIX_ACL || JFS_POSIX_ACL || REISERFS_FS_POSIX_ACL || NFSD_V4
305 default y
306
307source "fs/xfs/Kconfig"
308
309config MINIX_FS
310 tristate "Minix fs support"
311 help
312 Minix is a simple operating system used in many classes about OS's.
313 The minix file system (method to organize files on a hard disk
314 partition or a floppy disk) was the original file system for Linux,
315 but has been superseded by the second extended file system ext2fs.
316 You don't want to use the minix file system on your hard disk
317 because of certain built-in restrictions, but it is sometimes found
318 on older Linux floppy disks. This option will enlarge your kernel
319 by about 28 KB. If unsure, say N.
320
321 To compile this file system support as a module, choose M here: the
322 module will be called minix. Note that the file system of your root
323 partition (the one containing the directory /) cannot be compiled as
324 a module.
325
326config ROMFS_FS
327 tristate "ROM file system support"
328 ---help---
329 This is a very small read-only file system mainly intended for
330 initial ram disks of installation disks, but it could be used for
331 other read-only media as well. Read
332 <file:Documentation/filesystems/romfs.txt> for details.
333
334 To compile this file system support as a module, choose M here: the
335 module will be called romfs. Note that the file system of your
336 root partition (the one containing the directory /) cannot be a
337 module.
338
339 If you don't know whether you need it, then you don't need it:
340 answer N.
341
342config QUOTA
343 bool "Quota support"
344 help
345 If you say Y here, you will be able to set per user limits for disk
346 usage (also called disk quotas). Currently, it works for the
347 ext2, ext3, and reiserfs file system. ext3 also supports journalled
348 quotas for which you don't need to run quotacheck(8) after an unclean
349 shutdown. You need additional software in order to use quota support
350 (you can download sources from
351 <http://www.sf.net/projects/linuxquota/>). For further details, read
352 the Quota mini-HOWTO, available from
353 <http://www.tldp.org/docs.html#howto>, or the documentation provided
354 with the quota tools. Probably the quota support is only useful for
355 multi user systems. If unsure, say N.
356
357config QFMT_V1
358 tristate "Old quota format support"
359 depends on QUOTA
360 help
361 This quota format was (is) used by kernels earlier than 2.4.22. If
362 you have quota working and you don't want to convert to new quota
363 format say Y here.
364
365config QFMT_V2
366 tristate "Quota format v2 support"
367 depends on QUOTA
368 help
369 This quota format allows using quotas with 32-bit UIDs/GIDs. If you
370 need this functionality say Y here. Note that you will need recent
371 quota utilities (>= 3.01) for new quota format with this kernel.
372
373config QUOTACTL
374 bool
375 depends on XFS_QUOTA || QUOTA
376 default y
377
378config DNOTIFY
379 bool "Dnotify support" if EMBEDDED
380 default y
381 help
382 Dnotify is a directory-based per-fd file change notification system
383 that uses signals to communicate events to user-space. There exist
384 superior alternatives, but some applications may still rely on
385 dnotify.
386
387 Because of this, if unsure, say Y.
388
389config AUTOFS_FS
390 tristate "Kernel automounter support"
391 help
392 The automounter is a tool to automatically mount remote file systems
393 on demand. This implementation is partially kernel-based to reduce
394 overhead in the already-mounted case; this is unlike the BSD
395 automounter (amd), which is a pure user space daemon.
396
397 To use the automounter you need the user-space tools from the autofs
398 package; you can find the location in <file:Documentation/Changes>.
399 You also want to answer Y to "NFS file system support", below.
400
401 If you want to use the newer version of the automounter with more
402 features, say N here and say Y to "Kernel automounter v4 support",
403 below.
404
405 To compile this support as a module, choose M here: the module will be
406 called autofs.
407
408 If you are not a part of a fairly large, distributed network, you
409 probably do not need an automounter, and can say N here.
410
411config AUTOFS4_FS
412 tristate "Kernel automounter version 4 support (also supports v3)"
413 help
414 The automounter is a tool to automatically mount remote file systems
415 on demand. This implementation is partially kernel-based to reduce
416 overhead in the already-mounted case; this is unlike the BSD
417 automounter (amd), which is a pure user space daemon.
418
419 To use the automounter you need the user-space tools from
420 <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
421 want to answer Y to "NFS file system support", below.
422
423 To compile this support as a module, choose M here: the module will be
424 called autofs4. You will need to add "alias autofs autofs4" to your
425 modules configuration file.
426
427 If you are not a part of a fairly large, distributed network or
428 don't have a laptop which needs to dynamically reconfigure to the
429 local network, you probably do not need an automounter, and can say
430 N here.
431
432menu "CD-ROM/DVD Filesystems"
433
434config ISO9660_FS
435 tristate "ISO 9660 CDROM file system support"
436 help
437 This is the standard file system used on CD-ROMs. It was previously
438 known as "High Sierra File System" and is called "hsfs" on other
439 Unix systems. The so-called Rock-Ridge extensions which allow for
440 long Unix filenames and symbolic links are also supported by this
441 driver. If you have a CD-ROM drive and want to do more with it than
442 just listen to audio CDs and watch its LEDs, say Y (and read
443 <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
444 available from <http://www.tldp.org/docs.html#howto>), thereby
445 enlarging your kernel by about 27 KB; otherwise say N.
446
447 To compile this file system support as a module, choose M here: the
448 module will be called isofs.
449
450config JOLIET
451 bool "Microsoft Joliet CDROM extensions"
452 depends on ISO9660_FS
453 select NLS
454 help
455 Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
456 which allows for long filenames in unicode format (unicode is the
457 new 16 bit character code, successor to ASCII, which encodes the
458 characters of almost all languages of the world; see
459 <http://www.unicode.org/> for more information). Say Y here if you
460 want to be able to read Joliet CD-ROMs under Linux.
461
462config ZISOFS
463 bool "Transparent decompression extension"
464 depends on ISO9660_FS
465 select ZLIB_INFLATE
466 help
467 This is a Linux-specific extension to RockRidge which lets you store
468 data in compressed form on a CD-ROM and have it transparently
469 decompressed when the CD-ROM is accessed. See
470 <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
471 necessary to create such a filesystem. Say Y here if you want to be
472 able to read such compressed CD-ROMs.
473
474config ZISOFS_FS
475# for fs/nls/Config.in
476 tristate
477 depends on ZISOFS
478 default ISO9660_FS
479
480config UDF_FS
481 tristate "UDF file system support"
482 help
483 This is the new file system used on some CD-ROMs and DVDs. Say Y if
484 you intend to mount DVD discs or CDRW's written in packet mode, or
485 if written to by other UDF utilities, such as DirectCD.
486 Please read <file:Documentation/filesystems/udf.txt>.
487
488 To compile this file system support as a module, choose M here: the
489 module will be called udf.
490
491 If unsure, say N.
492
493config UDF_NLS
494 bool
495 default y
496 depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
497
498endmenu
499
500menu "DOS/FAT/NT Filesystems"
501
502config FAT_FS
503 tristate
504 select NLS
505 help
506 If you want to use one of the FAT-based file systems (the MS-DOS and
507 VFAT (Windows 95) file systems), then you must say Y or M here
508 to include FAT support. You will then be able to mount partitions or
509 diskettes with FAT-based file systems and transparently access the
510 files on them, i.e. MSDOS files will look and behave just like all
511 other Unix files.
512
513 This FAT support is not a file system in itself, it only provides
514 the foundation for the other file systems. You will have to say Y or
515 M to at least one of "MSDOS fs support" or "VFAT fs support" in
516 order to make use of it.
517
518 Another way to read and write MSDOS floppies and hard drive
519 partitions from within Linux (but not transparently) is with the
520 mtools ("man mtools") program suite. You don't need to say Y here in
521 order to do that.
522
523 If you need to move large files on floppies between a DOS and a
524 Linux box, say Y here, mount the floppy under Linux with an MSDOS
525 file system and use GNU tar's M option. GNU tar is a program
526 available for Unix and DOS ("man tar" or "info tar").
527
528 It is now also becoming possible to read and write compressed FAT
529 file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
530 details.
531
532 The FAT support will enlarge your kernel by about 37 KB. If unsure,
533 say Y.
534
535 To compile this as a module, choose M here: the module will be called
536 fat. Note that if you compile the FAT support as a module, you
537 cannot compile any of the FAT-based file systems into the kernel
538 -- they will have to be modules as well.
539
540config MSDOS_FS
541 tristate "MSDOS fs support"
542 select FAT_FS
543 help
544 This allows you to mount MSDOS partitions of your hard drive (unless
545 they are compressed; to access compressed MSDOS partitions under
546 Linux, you can either use the DOS emulator DOSEMU, described in the
547 DOSEMU-HOWTO, available from
548 <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
549 <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
550 intend to use dosemu with a non-compressed MSDOS partition, say Y
551 here) and MSDOS floppies. This means that file access becomes
552 transparent, i.e. the MSDOS files look and behave just like all
553 other Unix files.
554
555 If you have Windows 95 or Windows NT installed on your MSDOS
556 partitions, you should use the VFAT file system (say Y to "VFAT fs
557 support" below), or you will not be able to see the long filenames
558 generated by Windows 95 / Windows NT.
559
560 This option will enlarge your kernel by about 7 KB. If unsure,
561 answer Y. This will only work if you said Y to "DOS FAT fs support"
562 as well. To compile this as a module, choose M here: the module will
563 be called msdos.
564
565config VFAT_FS
566 tristate "VFAT (Windows-95) fs support"
567 select FAT_FS
568 help
569 This option provides support for normal Windows file systems with
570 long filenames. That includes non-compressed FAT-based file systems
571 used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
572 programs from the mtools package.
573
574 The VFAT support enlarges your kernel by about 10 KB and it only
575 works if you said Y to the "DOS FAT fs support" above. Please read
576 the file <file:Documentation/filesystems/vfat.txt> for details. If
577 unsure, say Y.
578
579 To compile this as a module, choose M here: the module will be called
580 vfat.
581
582config FAT_DEFAULT_CODEPAGE
583 int "Default codepage for FAT"
584 depends on MSDOS_FS || VFAT_FS
585 default 437
586 help
587 This option should be set to the codepage of your FAT filesystems.
588 It can be overridden with the "codepage" mount option.
589 See <file:Documentation/filesystems/vfat.txt> for more information.
590
591config FAT_DEFAULT_IOCHARSET
592 string "Default iocharset for FAT"
593 depends on VFAT_FS
594 default "iso8859-1"
595 help
596 Set this to the default input/output character set you'd
597 like FAT to use. It should probably match the character set
598 that most of your FAT filesystems use, and can be overridden
599 with the "iocharset" mount option for FAT filesystems.
600 Note that "utf8" is not recommended for FAT filesystems.
601 If unsure, you shouldn't set "utf8" here.
602 See <file:Documentation/filesystems/vfat.txt> for more information.
603
604config NTFS_FS
605 tristate "NTFS file system support"
606 select NLS
607 help
608 NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
609
610 Saying Y or M here enables read support. There is partial, but
611 safe, write support available. For write support you must also
612 say Y to "NTFS write support" below.
613
614 There are also a number of user-space tools available, called
615 ntfsprogs. These include ntfsundelete and ntfsresize, that work
616 without NTFS support enabled in the kernel.
617
618 This is a rewrite from scratch of Linux NTFS support and replaced
619 the old NTFS code starting with Linux 2.5.11. A backport to
620 the Linux 2.4 kernel series is separately available as a patch
621 from the project web site.
622
623 For more information see <file:Documentation/filesystems/ntfs.txt>
624 and <http://linux-ntfs.sourceforge.net/>.
625
626 To compile this file system support as a module, choose M here: the
627 module will be called ntfs.
628
629 If you are not using Windows NT, 2000, XP or 2003 in addition to
630 Linux on your computer it is safe to say N.
631
632config NTFS_DEBUG
633 bool "NTFS debugging support"
634 depends on NTFS_FS
635 help
636 If you are experiencing any problems with the NTFS file system, say
637 Y here. This will result in additional consistency checks to be
638 performed by the driver as well as additional debugging messages to
639 be written to the system log. Note that debugging messages are
640 disabled by default. To enable them, supply the option debug_msgs=1
641 at the kernel command line when booting the kernel or as an option
642 to insmod when loading the ntfs module. Once the driver is active,
643 you can enable debugging messages by doing (as root):
644 echo 1 > /proc/sys/fs/ntfs-debug
645 Replacing the "1" with "0" would disable debug messages.
646
647 If you leave debugging messages disabled, this results in little
648 overhead, but enabling debug messages results in very significant
649 slowdown of the system.
650
651 When reporting bugs, please try to have available a full dump of
652 debugging messages while the misbehaviour was occurring.
653
654config NTFS_RW
655 bool "NTFS write support"
656 depends on NTFS_FS
657 help
658 This enables the partial, but safe, write support in the NTFS driver.
659
660 The only supported operation is overwriting existing files, without
661 changing the file length. No file or directory creation, deletion or
662 renaming is possible. Note only non-resident files can be written to
663 so you may find that some very small files (<500 bytes or so) cannot
664 be written to.
665
666 While we cannot guarantee that it will not damage any data, we have
667 so far not received a single report where the driver would have
668 damaged someones data so we assume it is perfectly safe to use.
669
670 Note: While write support is safe in this version (a rewrite from
671 scratch of the NTFS support), it should be noted that the old NTFS
672 write support, included in Linux 2.5.10 and before (since 1997),
673 is not safe.
674
675 This is currently useful with TopologiLinux. TopologiLinux is run
676 on top of any DOS/Microsoft Windows system without partitioning your
677 hard disk. Unlike other Linux distributions TopologiLinux does not
678 need its own partition. For more information see
679 <http://topologi-linux.sourceforge.net/>
680
681 It is perfectly safe to say N here.
682
683endmenu
684
685menu "Pseudo filesystems"
686
687config PROC_FS
688 bool "/proc file system support"
689 help
690 This is a virtual file system providing information about the status
691 of the system. "Virtual" means that it doesn't take up any space on
692 your hard disk: the files are created on the fly by the kernel when
693 you try to access them. Also, you cannot read the files with older
694 version of the program less: you need to use more or cat.
695
696 It's totally cool; for example, "cat /proc/interrupts" gives
697 information about what the different IRQs are used for at the moment
698 (there is a small number of Interrupt ReQuest lines in your computer
699 that are used by the attached devices to gain the CPU's attention --
700 often a source of trouble if two devices are mistakenly configured
701 to use the same IRQ). The program procinfo to display some
702 information about your system gathered from the /proc file system.
703
704 Before you can use the /proc file system, it has to be mounted,
705 meaning it has to be given a location in the directory hierarchy.
706 That location should be /proc. A command such as "mount -t proc proc
707 /proc" or the equivalent line in /etc/fstab does the job.
708
709 The /proc file system is explained in the file
710 <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
711 ("man 5 proc").
712
713 This option will enlarge your kernel by about 67 KB. Several
714 programs depend on this, so everyone should say Y here.
715
716config PROC_KCORE
717 bool "/proc/kcore support" if !ARM
718 depends on PROC_FS && MMU
719
720config SYSFS
721 bool "sysfs file system support" if EMBEDDED
722 default y
723 help
724 The sysfs filesystem is a virtual filesystem that the kernel uses to
725 export internal kernel objects, their attributes, and their
726 relationships to one another.
727
728 Users can use sysfs to ascertain useful information about the running
729 kernel, such as the devices the kernel has discovered on each bus and
730 which driver each is bound to. sysfs can also be used to tune devices
731 and other kernel subsystems.
732
733 Some system agents rely on the information in sysfs to operate.
734 /sbin/hotplug uses device and object attributes in sysfs to assist in
735 delegating policy decisions, like persistantly naming devices.
736
737 sysfs is currently used by the block subsystem to mount the root
738 partition. If sysfs is disabled you must specify the boot device on
739 the kernel boot command line via its major and minor numbers. For
740 example, "root=03:01" for /dev/hda1.
741
742 Designers of embedded systems may wish to say N here to conserve space.
743
Linus Torvalds1da177e2005-04-16 15:20:36 -0700744config DEVPTS_FS_XATTR
745 bool "/dev/pts Extended Attributes"
746 depends on UNIX98_PTYS
747 help
748 Extended attributes are name:value pairs associated with inodes by
749 the kernel or by users (see the attr(5) manual page, or visit
750 <http://acl.bestbits.at/> for details).
751
752 If unsure, say N.
753
754config DEVPTS_FS_SECURITY
755 bool "/dev/pts Security Labels"
756 depends on DEVPTS_FS_XATTR
757 help
758 Security labels support alternative access control models
759 implemented by security modules like SELinux. This option
760 enables an extended attribute handler for file security
761 labels in the /dev/pts filesystem.
762
763 If you are not using a security module that requires using
764 extended attributes for file security labels, say N.
765
766config TMPFS
767 bool "Virtual memory file system support (former shm fs)"
768 help
769 Tmpfs is a file system which keeps all files in virtual memory.
770
771 Everything in tmpfs is temporary in the sense that no files will be
772 created on your hard drive. The files live in memory and swap
773 space. If you unmount a tmpfs instance, everything stored therein is
774 lost.
775
776 See <file:Documentation/filesystems/tmpfs.txt> for details.
777
778config TMPFS_XATTR
779 bool "tmpfs Extended Attributes"
780 depends on TMPFS
781 help
782 Extended attributes are name:value pairs associated with inodes by
783 the kernel or by users (see the attr(5) manual page, or visit
784 <http://acl.bestbits.at/> for details).
785
786 If unsure, say N.
787
788config TMPFS_SECURITY
789 bool "tmpfs Security Labels"
790 depends on TMPFS_XATTR
791 help
792 Security labels support alternative access control models
793 implemented by security modules like SELinux. This option
794 enables an extended attribute handler for file security
795 labels in the tmpfs filesystem.
796 If you are not using a security module that requires using
797 extended attributes for file security labels, say N.
798
799config HUGETLBFS
800 bool "HugeTLB file system support"
801 depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || X86_64 || BROKEN
802
803config HUGETLB_PAGE
804 def_bool HUGETLBFS
805
806config RAMFS
807 bool
808 default y
809 ---help---
810 Ramfs is a file system which keeps all files in RAM. It allows
811 read and write access.
812
813 It is more of an programming example than a useable file system. If
814 you need a file system which lives in RAM with limit checking use
815 tmpfs.
816
817 To compile this as a module, choose M here: the module will be called
818 ramfs.
819
820endmenu
821
822menu "Miscellaneous filesystems"
823
824config ADFS_FS
825 tristate "ADFS file system support (EXPERIMENTAL)"
826 depends on EXPERIMENTAL
827 help
828 The Acorn Disc Filing System is the standard file system of the
829 RiscOS operating system which runs on Acorn's ARM-based Risc PC
830 systems and the Acorn Archimedes range of machines. If you say Y
831 here, Linux will be able to read from ADFS partitions on hard drives
832 and from ADFS-formatted floppy discs. If you also want to be able to
833 write to those devices, say Y to "ADFS write support" below.
834
835 The ADFS partition should be the first partition (i.e.,
836 /dev/[hs]d?1) on each of your drives. Please read the file
837 <file:Documentation/filesystems/adfs.txt> for further details.
838
839 To compile this code as a module, choose M here: the module will be
840 called adfs.
841
842 If unsure, say N.
843
844config ADFS_FS_RW
845 bool "ADFS write support (DANGEROUS)"
846 depends on ADFS_FS
847 help
848 If you say Y here, you will be able to write to ADFS partitions on
849 hard drives and ADFS-formatted floppy disks. This is experimental
850 codes, so if you're unsure, say N.
851
852config AFFS_FS
853 tristate "Amiga FFS file system support (EXPERIMENTAL)"
854 depends on EXPERIMENTAL
855 help
856 The Fast File System (FFS) is the common file system used on hard
857 disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
858 if you want to be able to read and write files from and to an Amiga
859 FFS partition on your hard drive. Amiga floppies however cannot be
860 read with this driver due to an incompatibility of the floppy
861 controller used in an Amiga and the standard floppy controller in
862 PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
863 and <file:fs/affs/Changes>.
864
865 With this driver you can also mount disk files used by Bernd
866 Schmidt's Un*X Amiga Emulator
867 (<http://www.freiburg.linux.de/~uae/>).
868 If you want to do this, you will also need to say Y or M to "Loop
869 device support", above.
870
871 To compile this file system support as a module, choose M here: the
872 module will be called affs. If unsure, say N.
873
874config HFS_FS
875 tristate "Apple Macintosh file system support (EXPERIMENTAL)"
876 depends on EXPERIMENTAL
877 help
878 If you say Y here, you will be able to mount Macintosh-formatted
879 floppy disks and hard drive partitions with full read-write access.
880 Please read <file:fs/hfs/HFS.txt> to learn about the available mount
881 options.
882
883 To compile this file system support as a module, choose M here: the
884 module will be called hfs.
885
886config HFSPLUS_FS
887 tristate "Apple Extended HFS file system support"
888 select NLS
889 select NLS_UTF8
890 help
891 If you say Y here, you will be able to mount extended format
892 Macintosh-formatted hard drive partitions with full read-write access.
893
894 This file system is often called HFS+ and was introduced with
895 MacOS 8. It includes all Mac specific filesystem data such as
896 data forks and creator codes, but it also has several UNIX
897 style features such as file ownership and permissions.
898
899config BEFS_FS
900 tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
901 depends on EXPERIMENTAL
902 select NLS
903 help
904 The BeOS File System (BeFS) is the native file system of Be, Inc's
905 BeOS. Notable features include support for arbitrary attributes
906 on files and directories, and database-like indeces on selected
907 attributes. (Also note that this driver doesn't make those features
908 available at this time). It is a 64 bit filesystem, so it supports
909 extremly large volumes and files.
910
911 If you use this filesystem, you should also say Y to at least one
912 of the NLS (native language support) options below.
913
914 If you don't know what this is about, say N.
915
916 To compile this as a module, choose M here: the module will be
917 called befs.
918
919config BEFS_DEBUG
920 bool "Debug BeFS"
921 depends on BEFS_FS
922 help
923 If you say Y here, you can use the 'debug' mount option to enable
924 debugging output from the driver.
925
926config BFS_FS
927 tristate "BFS file system support (EXPERIMENTAL)"
928 depends on EXPERIMENTAL
929 help
930 Boot File System (BFS) is a file system used under SCO UnixWare to
931 allow the bootloader access to the kernel image and other important
932 files during the boot process. It is usually mounted under /stand
933 and corresponds to the slice marked as "STAND" in the UnixWare
934 partition. You should say Y if you want to read or write the files
935 on your /stand slice from within Linux. You then also need to say Y
936 to "UnixWare slices support", below. More information about the BFS
937 file system is contained in the file
938 <file:Documentation/filesystems/bfs.txt>.
939
940 If you don't know what this is about, say N.
941
942 To compile this as a module, choose M here: the module will be called
943 bfs. Note that the file system of your root partition (the one
944 containing the directory /) cannot be compiled as a module.
945
946
947
948config EFS_FS
949 tristate "EFS file system support (read only) (EXPERIMENTAL)"
950 depends on EXPERIMENTAL
951 help
952 EFS is an older file system used for non-ISO9660 CD-ROMs and hard
953 disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
954 uses the XFS file system for hard disk partitions however).
955
956 This implementation only offers read-only access. If you don't know
957 what all this is about, it's safe to say N. For more information
958 about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
959
960 To compile the EFS file system support as a module, choose M here: the
961 module will be called efs.
962
963config JFFS_FS
964 tristate "Journalling Flash File System (JFFS) support"
965 depends on MTD
966 help
967 JFFS is the Journaling Flash File System developed by Axis
968 Communications in Sweden, aimed at providing a crash/powerdown-safe
969 file system for disk-less embedded devices. Further information is
970 available at (<http://developer.axis.com/software/jffs/>).
971
972config JFFS_FS_VERBOSE
973 int "JFFS debugging verbosity (0 = quiet, 3 = noisy)"
974 depends on JFFS_FS
975 default "0"
976 help
977 Determines the verbosity level of the JFFS debugging messages.
978
979config JFFS_PROC_FS
980 bool "JFFS stats available in /proc filesystem"
981 depends on JFFS_FS && PROC_FS
982 help
983 Enabling this option will cause statistics from mounted JFFS file systems
984 to be made available to the user in the /proc/fs/jffs/ directory.
985
986config JFFS2_FS
987 tristate "Journalling Flash File System v2 (JFFS2) support"
988 select CRC32
989 depends on MTD
990 help
991 JFFS2 is the second generation of the Journalling Flash File System
992 for use on diskless embedded devices. It provides improved wear
993 levelling, compression and support for hard links. You cannot use
994 this on normal block devices, only on 'MTD' devices.
995
996 Further information on the design and implementation of JFFS2 is
997 available at <http://sources.redhat.com/jffs2/>.
998
999config JFFS2_FS_DEBUG
1000 int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
1001 depends on JFFS2_FS
1002 default "0"
1003 help
1004 This controls the amount of debugging messages produced by the JFFS2
1005 code. Set it to zero for use in production systems. For evaluation,
1006 testing and debugging, it's advisable to set it to one. This will
1007 enable a few assertions and will print debugging messages at the
1008 KERN_DEBUG loglevel, where they won't normally be visible. Level 2
1009 is unlikely to be useful - it enables extra debugging in certain
1010 areas which at one point needed debugging, but when the bugs were
1011 located and fixed, the detailed messages were relegated to level 2.
1012
1013 If reporting bugs, please try to have available a full dump of the
1014 messages at debug level 1 while the misbehaviour was occurring.
1015
1016config JFFS2_FS_NAND
1017 bool "JFFS2 support for NAND flash"
1018 depends on JFFS2_FS
1019 default n
1020 help
1021 This enables the support for NAND flash in JFFS2. NAND is a newer
1022 type of flash chip design than the traditional NOR flash, with
1023 higher density but a handful of characteristics which make it more
1024 interesting for the file system to use.
1025
1026 Say 'N' unless you have NAND flash.
1027
1028config JFFS2_FS_NOR_ECC
1029 bool "JFFS2 support for ECC'd NOR flash (EXPERIMENTAL)"
1030 depends on JFFS2_FS && EXPERIMENTAL
1031 default n
1032 help
1033 This enables the experimental support for NOR flash with transparent
1034 ECC for JFFS2. This type of flash chip is not common, however it is
1035 available from ST Microelectronics.
1036
1037config JFFS2_COMPRESSION_OPTIONS
1038 bool "Advanced compression options for JFFS2"
1039 depends on JFFS2_FS
1040 default n
1041 help
1042 Enabling this option allows you to explicitly choose which
1043 compression modules, if any, are enabled in JFFS2. Removing
1044 compressors and mean you cannot read existing file systems,
1045 and enabling experimental compressors can mean that you
1046 write a file system which cannot be read by a standard kernel.
1047
1048 If unsure, you should _definitely_ say 'N'.
1049
1050config JFFS2_ZLIB
1051 bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
1052 select ZLIB_INFLATE
1053 select ZLIB_DEFLATE
1054 depends on JFFS2_FS
1055 default y
1056 help
1057 Zlib is designed to be a free, general-purpose, legally unencumbered,
1058 lossless data-compression library for use on virtually any computer
1059 hardware and operating system. See <http://www.gzip.org/zlib/> for
1060 further information.
1061
1062 Say 'Y' if unsure.
1063
1064config JFFS2_RTIME
1065 bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
1066 depends on JFFS2_FS
1067 default y
1068 help
1069 Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
1070
1071config JFFS2_RUBIN
1072 bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
1073 depends on JFFS2_FS
1074 default n
1075 help
1076 RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
1077
1078choice
1079 prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
1080 default JFFS2_CMODE_PRIORITY
1081 depends on JFFS2_FS
1082 help
1083 You can set here the default compression mode of JFFS2 from
1084 the available compression modes. Don't touch if unsure.
1085
1086config JFFS2_CMODE_NONE
1087 bool "no compression"
1088 help
1089 Uses no compression.
1090
1091config JFFS2_CMODE_PRIORITY
1092 bool "priority"
1093 help
1094 Tries the compressors in a predefinied order and chooses the first
1095 successful one.
1096
1097config JFFS2_CMODE_SIZE
1098 bool "size (EXPERIMENTAL)"
1099 help
1100 Tries all compressors and chooses the one which has the smallest
1101 result.
1102
1103endchoice
1104
1105config CRAMFS
1106 tristate "Compressed ROM file system support (cramfs)"
1107 select ZLIB_INFLATE
1108 help
1109 Saying Y here includes support for CramFs (Compressed ROM File
1110 System). CramFs is designed to be a simple, small, and compressed
1111 file system for ROM based embedded systems. CramFs is read-only,
1112 limited to 256MB file systems (with 16MB files), and doesn't support
1113 16/32 bits uid/gid, hard links and timestamps.
1114
1115 See <file:Documentation/filesystems/cramfs.txt> and
1116 <file:fs/cramfs/README> for further information.
1117
1118 To compile this as a module, choose M here: the module will be called
1119 cramfs. Note that the root file system (the one containing the
1120 directory /) cannot be compiled as a module.
1121
1122 If unsure, say N.
1123
1124config VXFS_FS
1125 tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
1126 help
1127 FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
1128 file system format. VERITAS VxFS(TM) is the standard file system
1129 of SCO UnixWare (and possibly others) and optionally available
1130 for Sunsoft Solaris, HP-UX and many other operating systems.
1131 Currently only readonly access is supported.
1132
1133 NOTE: the file system type as used by mount(1), mount(2) and
1134 fstab(5) is 'vxfs' as it describes the file system format, not
1135 the actual driver.
1136
1137 To compile this as a module, choose M here: the module will be
1138 called freevxfs. If unsure, say N.
1139
1140
1141config HPFS_FS
1142 tristate "OS/2 HPFS file system support"
1143 help
1144 OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
1145 is the file system used for organizing files on OS/2 hard disk
1146 partitions. Say Y if you want to be able to read files from and
1147 write files to an OS/2 HPFS partition on your hard drive. OS/2
1148 floppies however are in regular MSDOS format, so you don't need this
1149 option in order to be able to read them. Read
1150 <file:Documentation/filesystems/hpfs.txt>.
1151
1152 To compile this file system support as a module, choose M here: the
1153 module will be called hpfs. If unsure, say N.
1154
1155
1156
1157config QNX4FS_FS
1158 tristate "QNX4 file system support (read only)"
1159 help
1160 This is the file system used by the real-time operating systems
1161 QNX 4 and QNX 6 (the latter is also called QNX RTP).
1162 Further information is available at <http://www.qnx.com/>.
1163 Say Y if you intend to mount QNX hard disks or floppies.
1164 Unless you say Y to "QNX4FS read-write support" below, you will
1165 only be able to read these file systems.
1166
1167 To compile this file system support as a module, choose M here: the
1168 module will be called qnx4.
1169
1170 If you don't know whether you need it, then you don't need it:
1171 answer N.
1172
1173config QNX4FS_RW
1174 bool "QNX4FS write support (DANGEROUS)"
1175 depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
1176 help
1177 Say Y if you want to test write support for QNX4 file systems.
1178
1179 It's currently broken, so for now:
1180 answer N.
1181
1182
1183
1184config SYSV_FS
1185 tristate "System V/Xenix/V7/Coherent file system support"
1186 help
1187 SCO, Xenix and Coherent are commercial Unix systems for Intel
1188 machines, and Version 7 was used on the DEC PDP-11. Saying Y
1189 here would allow you to read from their floppies and hard disk
1190 partitions.
1191
1192 If you have floppies or hard disk partitions like that, it is likely
1193 that they contain binaries from those other Unix systems; in order
1194 to run these binaries, you will want to install linux-abi which is a
1195 a set of kernel modules that lets you run SCO, Xenix, Wyse,
1196 UnixWare, Dell Unix and System V programs under Linux. It is
1197 available via FTP (user: ftp) from
1198 <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
1199 NOTE: that will work only for binaries from Intel-based systems;
1200 PDP ones will have to wait until somebody ports Linux to -11 ;-)
1201
1202 If you only intend to mount files from some other Unix over the
1203 network using NFS, you don't need the System V file system support
1204 (but you need NFS file system support obviously).
1205
1206 Note that this option is generally not needed for floppies, since a
1207 good portable way to transport files and directories between unixes
1208 (and even other operating systems) is given by the tar program ("man
1209 tar" or preferably "info tar"). Note also that this option has
1210 nothing whatsoever to do with the option "System V IPC". Read about
1211 the System V file system in
1212 <file:Documentation/filesystems/sysv-fs.txt>.
1213 Saying Y here will enlarge your kernel by about 27 KB.
1214
1215 To compile this as a module, choose M here: the module will be called
1216 sysv.
1217
1218 If you haven't heard about all of this before, it's safe to say N.
1219
1220
1221
1222config UFS_FS
1223 tristate "UFS file system support (read only)"
1224 help
1225 BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
1226 OpenBSD and NeXTstep) use a file system called UFS. Some System V
1227 Unixes can create and mount hard disk partitions and diskettes using
1228 this file system as well. Saying Y here will allow you to read from
1229 these partitions; if you also want to write to them, say Y to the
1230 experimental "UFS file system write support", below. Please read the
1231 file <file:Documentation/filesystems/ufs.txt> for more information.
1232
1233 The recently released UFS2 variant (used in FreeBSD 5.x) is
1234 READ-ONLY supported.
1235
1236 If you only intend to mount files from some other Unix over the
1237 network using NFS, you don't need the UFS file system support (but
1238 you need NFS file system support obviously).
1239
1240 Note that this option is generally not needed for floppies, since a
1241 good portable way to transport files and directories between unixes
1242 (and even other operating systems) is given by the tar program ("man
1243 tar" or preferably "info tar").
1244
1245 When accessing NeXTstep files, you may need to convert them from the
1246 NeXT character set to the Latin1 character set; use the program
1247 recode ("info recode") for this purpose.
1248
1249 To compile the UFS file system support as a module, choose M here: the
1250 module will be called ufs.
1251
1252 If you haven't heard about all of this before, it's safe to say N.
1253
1254config UFS_FS_WRITE
1255 bool "UFS file system write support (DANGEROUS)"
1256 depends on UFS_FS && EXPERIMENTAL
1257 help
1258 Say Y here if you want to try writing to UFS partitions. This is
1259 experimental, so you should back up your UFS partitions beforehand.
1260
1261endmenu
1262
1263menu "Network File Systems"
1264 depends on NET
1265
1266config NFS_FS
1267 tristate "NFS file system support"
1268 depends on INET
1269 select LOCKD
1270 select SUNRPC
Andreas Gruenbacherb7fa0552005-06-22 17:16:27 +00001271 select NFS_ACL_SUPPORT if NFS_V3_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001272 help
1273 If you are connected to some other (usually local) Unix computer
1274 (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
1275 on that computer (the NFS server) using the Network File Sharing
1276 protocol, say Y. "Mounting files" means that the client can access
1277 the files with usual UNIX commands as if they were sitting on the
1278 client's hard disk. For this to work, the server must run the
1279 programs nfsd and mountd (but does not need to have NFS file system
1280 support enabled in its kernel). NFS is explained in the Network
1281 Administrator's Guide, available from
1282 <http://www.tldp.org/docs.html#guide>, on its man page: "man
1283 nfs", and in the NFS-HOWTO.
1284
1285 A superior but less widely used alternative to NFS is provided by
1286 the Coda file system; see "Coda file system support" below.
1287
1288 If you say Y here, you should have said Y to TCP/IP networking also.
1289 This option would enlarge your kernel by about 27 KB.
1290
1291 To compile this file system support as a module, choose M here: the
1292 module will be called nfs.
1293
1294 If you are configuring a diskless machine which will mount its root
1295 file system over NFS at boot time, say Y here and to "Kernel
1296 level IP autoconfiguration" above and to "Root file system on NFS"
1297 below. You cannot compile this driver as a module in this case.
1298 There are two packages designed for booting diskless machines over
1299 the net: netboot, available from
1300 <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
1301 available from <http://ftp1.sourceforge.net/etherboot/>.
1302
1303 If you don't know what all this is about, say N.
1304
1305config NFS_V3
1306 bool "Provide NFSv3 client support"
1307 depends on NFS_FS
1308 help
1309 Say Y here if you want your NFS client to be able to speak version
1310 3 of the NFS protocol.
1311
1312 If unsure, say Y.
1313
Andreas Gruenbacherb7fa0552005-06-22 17:16:27 +00001314config NFS_V3_ACL
1315 bool "Provide client support for the NFSv3 ACL protocol extension"
1316 depends on NFS_V3
1317 help
1318 Implement the NFSv3 ACL protocol extension for manipulating POSIX
1319 Access Control Lists. The server should also be compiled with
1320 the NFSv3 ACL protocol extension; see the CONFIG_NFSD_V3_ACL option.
1321
1322 If unsure, say N.
1323
Linus Torvalds1da177e2005-04-16 15:20:36 -07001324config NFS_V4
1325 bool "Provide NFSv4 client support (EXPERIMENTAL)"
1326 depends on NFS_FS && EXPERIMENTAL
1327 select RPCSEC_GSS_KRB5
1328 help
1329 Say Y here if you want your NFS client to be able to speak the newer
1330 version 4 of the NFS protocol.
1331
1332 Note: Requires auxiliary userspace daemons which may be found on
1333 http://www.citi.umich.edu/projects/nfsv4/
1334
1335 If unsure, say N.
1336
1337config NFS_DIRECTIO
1338 bool "Allow direct I/O on NFS files (EXPERIMENTAL)"
1339 depends on NFS_FS && EXPERIMENTAL
1340 help
1341 This option enables applications to perform uncached I/O on files
1342 in NFS file systems using the O_DIRECT open() flag. When O_DIRECT
1343 is set for a file, its data is not cached in the system's page
1344 cache. Data is moved to and from user-level application buffers
1345 directly. Unlike local disk-based file systems, NFS O_DIRECT has
1346 no alignment restrictions.
1347
1348 Unless your program is designed to use O_DIRECT properly, you are
1349 much better off allowing the NFS client to manage data caching for
1350 you. Misusing O_DIRECT can cause poor server performance or network
1351 storms. This kernel build option defaults OFF to avoid exposing
1352 system administrators unwittingly to a potentially hazardous
1353 feature.
1354
1355 For more details on NFS O_DIRECT, see fs/nfs/direct.c.
1356
1357 If unsure, say N. This reduces the size of the NFS client, and
1358 causes open() to return EINVAL if a file residing in NFS is
1359 opened with the O_DIRECT flag.
1360
1361config NFSD
1362 tristate "NFS server support"
1363 depends on INET
1364 select LOCKD
1365 select SUNRPC
1366 select EXPORTFS
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001367 select NFS_ACL_SUPPORT if NFSD_V3_ACL || NFSD_V2_ACL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368 help
1369 If you want your Linux box to act as an NFS *server*, so that other
1370 computers on your local network which support NFS can access certain
1371 directories on your box transparently, you have two options: you can
1372 use the self-contained user space program nfsd, in which case you
1373 should say N here, or you can say Y and use the kernel based NFS
1374 server. The advantage of the kernel based solution is that it is
1375 faster.
1376
1377 In either case, you will need support software; the respective
1378 locations are given in the file <file:Documentation/Changes> in the
1379 NFS section.
1380
1381 If you say Y here, you will get support for version 2 of the NFS
1382 protocol (NFSv2). If you also want NFSv3, say Y to the next question
1383 as well.
1384
1385 Please read the NFS-HOWTO, available from
1386 <http://www.tldp.org/docs.html#howto>.
1387
1388 To compile the NFS server support as a module, choose M here: the
1389 module will be called nfsd. If unsure, say N.
1390
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001391config NFSD_V2_ACL
1392 bool
1393 depends on NFSD
1394
Linus Torvalds1da177e2005-04-16 15:20:36 -07001395config NFSD_V3
1396 bool "Provide NFSv3 server support"
1397 depends on NFSD
1398 help
1399 If you would like to include the NFSv3 server as well as the NFSv2
1400 server, say Y here. If unsure, say Y.
1401
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001402config NFSD_V3_ACL
1403 bool "Provide server support for the NFSv3 ACL protocol extension"
1404 depends on NFSD_V3
1405 select NFSD_V2_ACL
1406 help
1407 Implement the NFSv3 ACL protocol extension for manipulating POSIX
1408 Access Control Lists on exported file systems. NFS clients should
1409 be compiled with the NFSv3 ACL protocol extension; see the
1410 CONFIG_NFS_V3_ACL option. If unsure, say N.
1411
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412config NFSD_V4
1413 bool "Provide NFSv4 server support (EXPERIMENTAL)"
1414 depends on NFSD_V3 && EXPERIMENTAL
1415 select NFSD_TCP
1416 help
1417 If you would like to include the NFSv4 server as well as the NFSv2
1418 and NFSv3 servers, say Y here. This feature is experimental, and
1419 should only be used if you are interested in helping to test NFSv4.
1420 If unsure, say N.
1421
1422config NFSD_TCP
1423 bool "Provide NFS server over TCP support"
1424 depends on NFSD
1425 default y
1426 help
1427 If you want your NFS server to support TCP connections, say Y here.
1428 TCP connections usually perform better than the default UDP when
1429 the network is lossy or congested. If unsure, say Y.
1430
1431config ROOT_NFS
1432 bool "Root file system on NFS"
1433 depends on NFS_FS=y && IP_PNP
1434 help
1435 If you want your Linux box to mount its whole root file system (the
1436 one containing the directory /) from some other computer over the
1437 net via NFS (presumably because your box doesn't have a hard disk),
1438 say Y. Read <file:Documentation/nfsroot.txt> for details. It is
1439 likely that in this case, you also want to say Y to "Kernel level IP
1440 autoconfiguration" so that your box can discover its network address
1441 at boot time.
1442
1443 Most people say N here.
1444
1445config LOCKD
1446 tristate
1447
1448config LOCKD_V4
1449 bool
1450 depends on NFSD_V3 || NFS_V3
1451 default y
1452
1453config EXPORTFS
1454 tristate
1455
Andreas Gruenbachera257cdd2005-06-22 17:16:26 +00001456config NFS_ACL_SUPPORT
1457 tristate
1458 select FS_POSIX_ACL
1459
1460config NFS_COMMON
1461 bool
1462 depends on NFSD || NFS_FS
1463 default y
1464
Linus Torvalds1da177e2005-04-16 15:20:36 -07001465config SUNRPC
1466 tristate
1467
1468config SUNRPC_GSS
1469 tristate
1470
1471config RPCSEC_GSS_KRB5
1472 tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
1473 depends on SUNRPC && EXPERIMENTAL
1474 select SUNRPC_GSS
1475 select CRYPTO
1476 select CRYPTO_MD5
1477 select CRYPTO_DES
1478 help
1479 Provides for secure RPC calls by means of a gss-api
1480 mechanism based on Kerberos V5. This is required for
1481 NFSv4.
1482
1483 Note: Requires an auxiliary userspace daemon which may be found on
1484 http://www.citi.umich.edu/projects/nfsv4/
1485
1486 If unsure, say N.
1487
1488config RPCSEC_GSS_SPKM3
1489 tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
1490 depends on SUNRPC && EXPERIMENTAL
1491 select SUNRPC_GSS
1492 select CRYPTO
1493 select CRYPTO_MD5
1494 select CRYPTO_DES
1495 help
1496 Provides for secure RPC calls by means of a gss-api
1497 mechanism based on the SPKM3 public-key mechanism.
1498
1499 Note: Requires an auxiliary userspace daemon which may be found on
1500 http://www.citi.umich.edu/projects/nfsv4/
1501
1502 If unsure, say N.
1503
1504config SMB_FS
1505 tristate "SMB file system support (to mount Windows shares etc.)"
1506 depends on INET
1507 select NLS
1508 help
1509 SMB (Server Message Block) is the protocol Windows for Workgroups
1510 (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
1511 files and printers over local networks. Saying Y here allows you to
1512 mount their file systems (often called "shares" in this context) and
1513 access them just like any other Unix directory. Currently, this
1514 works only if the Windows machines use TCP/IP as the underlying
1515 transport protocol, and not NetBEUI. For details, read
1516 <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
1517 available from <http://www.tldp.org/docs.html#howto>.
1518
1519 Note: if you just want your box to act as an SMB *server* and make
1520 files and printing services available to Windows clients (which need
1521 to have a TCP/IP stack), you don't need to say Y here; you can use
1522 the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
1523 for that.
1524
1525 General information about how to connect Linux, Windows machines and
1526 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1527
1528 To compile the SMB support as a module, choose M here: the module will
1529 be called smbfs. Most people say N, however.
1530
1531config SMB_NLS_DEFAULT
1532 bool "Use a default NLS"
1533 depends on SMB_FS
1534 help
1535 Enabling this will make smbfs use nls translations by default. You
1536 need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
1537 settings and you need to give the default nls for the SMB server as
1538 CONFIG_SMB_NLS_REMOTE.
1539
1540 The nls settings can be changed at mount time, if your smbmount
1541 supports that, using the codepage and iocharset parameters.
1542
1543 smbmount from samba 2.2.0 or later supports this.
1544
1545config SMB_NLS_REMOTE
1546 string "Default Remote NLS Option"
1547 depends on SMB_NLS_DEFAULT
1548 default "cp437"
1549 help
1550 This setting allows you to specify a default value for which
1551 codepage the server uses. If this field is left blank no
1552 translations will be done by default. The local codepage/charset
1553 default to CONFIG_NLS_DEFAULT.
1554
1555 The nls settings can be changed at mount time, if your smbmount
1556 supports that, using the codepage and iocharset parameters.
1557
1558 smbmount from samba 2.2.0 or later supports this.
1559
1560config CIFS
1561 tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)"
1562 depends on INET
1563 select NLS
1564 help
1565 This is the client VFS module for the Common Internet File System
1566 (CIFS) protocol which is the successor to the Server Message Block
1567 (SMB) protocol, the native file sharing mechanism for most early
1568 PC operating systems. The CIFS protocol is fully supported by
1569 file servers such as Windows 2000 (including Windows 2003, NT 4
1570 and Windows XP) as well by Samba (which provides excellent CIFS
1571 server support for Linux and many other operating systems). Currently
1572 you must use the smbfs client filesystem to access older SMB servers
1573 such as Windows 9x and OS/2.
1574
1575 The intent of the cifs module is to provide an advanced
1576 network file system client for mounting to CIFS compliant servers,
1577 including support for dfs (hierarchical name space), secure per-user
1578 session establishment, safe distributed caching (oplock), optional
1579 packet signing, Unicode and other internationalization improvements,
1580 and optional Winbind (nsswitch) integration. You do not need to enable
1581 cifs if running only a (Samba) server. It is possible to enable both
1582 smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003
1583 and Samba 3 servers, and smbfs for accessing old servers). If you need
1584 to mount to Samba or Windows 2003 servers from this machine, say Y.
1585
1586config CIFS_STATS
1587 bool "CIFS statistics"
1588 depends on CIFS
1589 help
1590 Enabling this option will cause statistics for each server share
1591 mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
1592
1593config CIFS_XATTR
1594 bool "CIFS extended attributes (EXPERIMENTAL)"
1595 depends on CIFS
1596 help
1597 Extended attributes are name:value pairs associated with inodes by
1598 the kernel or by users (see the attr(5) manual page, or visit
1599 <http://acl.bestbits.at/> for details). CIFS maps the name of
1600 extended attributes beginning with the user namespace prefix
1601 to SMB/CIFS EAs. EAs are stored on Windows servers without the
1602 user namespace prefix, but their names are seen by Linux cifs clients
1603 prefaced by the user namespace prefix. The system namespace
1604 (used by some filesystems to store ACLs) is not supported at
1605 this time.
1606
1607 If unsure, say N.
1608
1609config CIFS_POSIX
1610 bool "CIFS POSIX Extensions (EXPERIMENTAL)"
1611 depends on CIFS_XATTR
1612 help
1613 Enabling this option will cause the cifs client to attempt to
1614 negotiate a newer dialect with servers, such as Samba 3.0.5
1615 or later, that optionally can handle more POSIX like (rather
1616 than Windows like) file behavior. It also enables
1617 support for POSIX ACLs (getfacl and setfacl) to servers
1618 (such as Samba 3.10 and later) which can negotiate
1619 CIFS POSIX ACL support. If unsure, say N.
1620
1621config CIFS_EXPERIMENTAL
1622 bool "CIFS Experimental Features (EXPERIMENTAL)"
1623 depends on CIFS
1624 help
1625 Enables cifs features under testing. These features
1626 are highly experimental. If unsure, say N.
1627
1628config NCP_FS
1629 tristate "NCP file system support (to mount NetWare volumes)"
1630 depends on IPX!=n || INET
1631 help
1632 NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
1633 used by Novell NetWare clients to talk to file servers. It is to
1634 IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
1635 to mount NetWare file server volumes and to access them just like
1636 any other Unix directory. For details, please read the file
1637 <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
1638 the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
1639
1640 You do not have to say Y here if you want your Linux box to act as a
1641 file *server* for Novell NetWare clients.
1642
1643 General information about how to connect Linux, Windows machines and
1644 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
1645
1646 To compile this as a module, choose M here: the module will be called
1647 ncpfs. Say N unless you are connected to a Novell network.
1648
1649source "fs/ncpfs/Kconfig"
1650
1651config CODA_FS
1652 tristate "Coda file system support (advanced network fs)"
1653 depends on INET
1654 help
1655 Coda is an advanced network file system, similar to NFS in that it
1656 enables you to mount file systems of a remote server and access them
1657 with regular Unix commands as if they were sitting on your hard
1658 disk. Coda has several advantages over NFS: support for
1659 disconnected operation (e.g. for laptops), read/write server
1660 replication, security model for authentication and encryption,
1661 persistent client caches and write back caching.
1662
1663 If you say Y here, your Linux box will be able to act as a Coda
1664 *client*. You will need user level code as well, both for the
1665 client and server. Servers are currently user level, i.e. they need
1666 no kernel support. Please read
1667 <file:Documentation/filesystems/coda.txt> and check out the Coda
1668 home page <http://www.coda.cs.cmu.edu/>.
1669
1670 To compile the coda client support as a module, choose M here: the
1671 module will be called coda.
1672
1673config CODA_FS_OLD_API
1674 bool "Use 96-bit Coda file identifiers"
1675 depends on CODA_FS
1676 help
1677 A new kernel-userspace API had to be introduced for Coda v6.0
1678 to support larger 128-bit file identifiers as needed by the
1679 new realms implementation.
1680
1681 However this new API is not backward compatible with older
1682 clients. If you really need to run the old Coda userspace
1683 cache manager then say Y.
1684
1685 For most cases you probably want to say N.
1686
1687config AFS_FS
1688# for fs/nls/Config.in
1689 tristate "Andrew File System support (AFS) (Experimental)"
1690 depends on INET && EXPERIMENTAL
1691 select RXRPC
1692 help
1693 If you say Y here, you will get an experimental Andrew File System
1694 driver. It currently only supports unsecured read-only AFS access.
1695
1696 See <file:Documentation/filesystems/afs.txt> for more intormation.
1697
1698 If unsure, say N.
1699
1700config RXRPC
1701 tristate
1702
1703endmenu
1704
1705menu "Partition Types"
1706
1707source "fs/partitions/Kconfig"
1708
1709endmenu
1710
1711source "fs/nls/Kconfig"
1712
1713endmenu
1714