blob: 9e6099e6962266ed27023c9bdcbb59c32fa4b96c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
17 */
18
Linus Torvalds1da177e2005-04-16 15:20:36 -070019#include <linux/init.h>
20#include <linux/kernel.h>
21#include <linux/linkage.h>
22#include <linux/mm.h>
23#include <linux/blkdev.h>
24#include <linux/bootmem.h>
Ralf Baechlefcdb27a2006-01-18 17:37:07 +000025#include <linux/pm.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070026#include <linux/smp.h>
27
28#include <asm/bootinfo.h>
29#include <asm/reboot.h>
30#include <asm/sibyte/board.h>
31
32#include "cfe_api.h"
33#include "cfe_error.h"
34
35/* Max ram addressable in 32-bit segments */
Ralf Baechle875d43e2005-09-03 15:56:16 -070036#ifdef CONFIG_64BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -070037#define MAX_RAM_SIZE (~0ULL)
38#else
39#ifdef CONFIG_HIGHMEM
40#ifdef CONFIG_64BIT_PHYS_ADDR
41#define MAX_RAM_SIZE (~0ULL)
42#else
43#define MAX_RAM_SIZE (0xffffffffULL)
44#endif
45#else
46#define MAX_RAM_SIZE (0x1fffffffULL)
47#endif
48#endif
49
50#define SIBYTE_MAX_MEM_REGIONS 8
51phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
52phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
53unsigned int board_mem_region_count;
54
55int cfe_cons_handle;
56
57#ifdef CONFIG_BLK_DEV_INITRD
58extern unsigned long initrd_start, initrd_end;
59#endif
60
61#ifdef CONFIG_KGDB
62extern int kgdb_port;
63#endif
64
65static void ATTRIB_NORET cfe_linux_exit(void *arg)
66{
67 int warm = *(int *)arg;
68
69 if (smp_processor_id()) {
70 static int reboot_smp;
71
72 /* Don't repeat the process from another CPU */
73 if (!reboot_smp) {
74 /* Get CPU 0 to do the cfe_exit */
75 reboot_smp = 1;
76 smp_call_function(cfe_linux_exit, arg, 1, 0);
77 }
78 } else {
79 printk("Passing control back to CFE...\n");
80 cfe_exit(warm, 0);
81 printk("cfe_exit returned??\n");
82 }
83 while (1);
84}
85
86static void ATTRIB_NORET cfe_linux_restart(char *command)
87{
88 static const int zero;
89
90 cfe_linux_exit((void *)&zero);
91}
92
93static void ATTRIB_NORET cfe_linux_halt(void)
94{
95 static const int one = 1;
96
97 cfe_linux_exit((void *)&one);
98}
99
100static __init void prom_meminit(void)
101{
102 u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */
103 int mem_flags = 0;
104 unsigned int idx;
105 int rd_flag;
106#ifdef CONFIG_BLK_DEV_INITRD
107 unsigned long initrd_pstart;
108 unsigned long initrd_pend;
109
110 initrd_pstart = CPHYSADDR(initrd_start);
111 initrd_pend = CPHYSADDR(initrd_end);
112 if (initrd_start &&
113 ((initrd_pstart > MAX_RAM_SIZE)
114 || (initrd_pend > MAX_RAM_SIZE))) {
115 panic("initrd out of addressable memory");
116 }
117
118#endif /* INITRD */
119
120 for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE;
121 idx++) {
122 rd_flag = 0;
123 if (type == CFE_MI_AVAILABLE) {
124 /*
125 * See if this block contains (any portion of) the
126 * ramdisk
127 */
128#ifdef CONFIG_BLK_DEV_INITRD
129 if (initrd_start) {
130 if ((initrd_pstart > addr) &&
131 (initrd_pstart < (addr + size))) {
132 add_memory_region(addr,
133 initrd_pstart - addr,
134 BOOT_MEM_RAM);
135 rd_flag = 1;
136 }
137 if ((initrd_pend > addr) &&
138 (initrd_pend < (addr + size))) {
139 add_memory_region(initrd_pend,
140 (addr + size) - initrd_pend,
141 BOOT_MEM_RAM);
142 rd_flag = 1;
143 }
144 }
145#endif
146 if (!rd_flag) {
147 if (addr > MAX_RAM_SIZE)
148 continue;
149 if (addr+size > MAX_RAM_SIZE)
150 size = MAX_RAM_SIZE - (addr+size) + 1;
151 /*
152 * memcpy/__copy_user prefetch, which
153 * will cause a bus error for
154 * KSEG/KUSEG addrs not backed by RAM.
155 * Hence, reserve some padding for the
156 * prefetch distance.
157 */
158 if (size > 512)
159 size -= 512;
160 add_memory_region(addr, size, BOOT_MEM_RAM);
161 }
162 board_mem_region_addrs[board_mem_region_count] = addr;
163 board_mem_region_sizes[board_mem_region_count] = size;
164 board_mem_region_count++;
165 if (board_mem_region_count ==
166 SIBYTE_MAX_MEM_REGIONS) {
167 /*
168 * Too many regions. Need to configure more
169 */
170 while(1);
171 }
172 }
173 }
174#ifdef CONFIG_BLK_DEV_INITRD
175 if (initrd_start) {
176 add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
177 BOOT_MEM_RESERVED);
178 }
179#endif
180}
181
182#ifdef CONFIG_BLK_DEV_INITRD
183static int __init initrd_setup(char *str)
184{
185 char rdarg[64];
186 int idx;
187 char *tmp, *endptr;
188 unsigned long initrd_size;
189
190 /* Make a copy of the initrd argument so we can smash it up here */
191 for (idx = 0; idx < sizeof(rdarg)-1; idx++) {
192 if (!str[idx] || (str[idx] == ' ')) break;
193 rdarg[idx] = str[idx];
194 }
195
196 rdarg[idx] = 0;
197 str = rdarg;
198
199 /*
200 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
201 * e.g. initrd=3abfd@80010000. This is set up by the loader.
202 */
203 for (tmp = str; *tmp != '@'; tmp++) {
204 if (!*tmp) {
205 goto fail;
206 }
207 }
208 *tmp = 0;
209 tmp++;
210 if (!*tmp) {
211 goto fail;
212 }
213 initrd_size = simple_strtoul(str, &endptr, 16);
214 if (*endptr) {
215 *(tmp-1) = '@';
216 goto fail;
217 }
218 *(tmp-1) = '@';
219 initrd_start = simple_strtoul(tmp, &endptr, 16);
220 if (*endptr) {
221 goto fail;
222 }
223 initrd_end = initrd_start + initrd_size;
224 prom_printf("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
225 return 1;
226 fail:
227 prom_printf("Bad initrd argument. Disabling initrd\n");
228 initrd_start = 0;
229 initrd_end = 0;
230 return 1;
231}
232
233#endif
234
235/*
236 * prom_init is called just after the cpu type is determined, from setup_arch()
237 */
238void __init prom_init(void)
239{
240 uint64_t cfe_ept, cfe_handle;
241 unsigned int cfe_eptseal;
242 int argc = fw_arg0;
243 char **envp = (char **) fw_arg2;
244 int *prom_vec = (int *) fw_arg3;
245#ifdef CONFIG_KGDB
246 char *arg;
247#endif
248
249 _machine_restart = cfe_linux_restart;
250 _machine_halt = cfe_linux_halt;
Ralf Baechlefcdb27a2006-01-18 17:37:07 +0000251 pm_power_off = cfe_linux_halt;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252
253 /*
254 * Check if a loader was used; if NOT, the 4 arguments are
255 * what CFE gives us (handle, 0, EPT and EPTSEAL)
256 */
257 if (argc < 0) {
258 cfe_handle = (uint64_t)(long)argc;
259 cfe_ept = (long)envp;
260 cfe_eptseal = (uint32_t)(unsigned long)prom_vec;
261 } else {
262 if ((int32_t)(long)prom_vec < 0) {
263 /*
264 * Old loader; all it gives us is the handle,
265 * so use the "known" entrypoint and assume
266 * the seal.
267 */
268 cfe_handle = (uint64_t)(long)prom_vec;
269 cfe_ept = (uint64_t)((int32_t)0x9fc00500);
270 cfe_eptseal = CFE_EPTSEAL;
271 } else {
272 /*
273 * Newer loaders bundle the handle/ept/eptseal
274 * Note: prom_vec is in the loader's useg
275 * which is still alive in the TLB.
276 */
277 cfe_handle = (uint64_t)((int32_t *)prom_vec)[0];
278 cfe_ept = (uint64_t)((int32_t *)prom_vec)[2];
279 cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3];
280 }
281 }
282 if (cfe_eptseal != CFE_EPTSEAL) {
283 /* too early for panic to do any good */
284 prom_printf("CFE's entrypoint seal doesn't match. Spinning.");
285 while (1) ;
286 }
287 cfe_init(cfe_handle, cfe_ept);
Ralf Baechle42a3b4f2005-09-03 15:56:17 -0700288 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289 * Get the handle for (at least) prom_putchar, possibly for
290 * boot console
291 */
292 cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
293 if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
294 if (argc < 0) {
295 /*
296 * It's OK for direct boot to not provide a
297 * command line
298 */
299 strcpy(arcs_cmdline, "root=/dev/ram0 ");
300#ifdef CONFIG_SIBYTE_PTSWARM
301 strcat(arcs_cmdline, "console=ttyS0,115200 ");
302#endif
303 } else {
304 /* The loader should have set the command line */
305 /* too early for panic to do any good */
306 prom_printf("LINUX_CMDLINE not defined in cfe.");
307 while (1) ;
308 }
309 }
310
311#ifdef CONFIG_KGDB
312 if ((arg = strstr(arcs_cmdline,"kgdb=duart")) != NULL)
313 kgdb_port = (arg[10] == '0') ? 0 : 1;
314 else
315 kgdb_port = 1;
316#endif
317
318#ifdef CONFIG_BLK_DEV_INITRD
319 {
320 char *ptr;
321 /* Need to find out early whether we've got an initrd. So scan
322 the list looking now */
323 for (ptr = arcs_cmdline; *ptr; ptr++) {
324 while (*ptr == ' ') {
325 ptr++;
326 }
327 if (!strncmp(ptr, "initrd=", 7)) {
328 initrd_setup(ptr+7);
329 break;
330 } else {
331 while (*ptr && (*ptr != ' ')) {
332 ptr++;
333 }
334 }
335 }
336 }
337#endif /* CONFIG_BLK_DEV_INITRD */
338
339 /* Not sure this is needed, but it's the safe way. */
340 arcs_cmdline[CL_SIZE-1] = 0;
341
342 mips_machgroup = MACH_GROUP_SIBYTE;
343 prom_meminit();
344}
345
Atsushi Nemotoc44e8d52006-12-30 00:43:59 +0900346void __init prom_free_prom_memory(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700347{
348 /* Not sure what I'm supposed to do here. Nothing, I think */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349}
350
351void prom_putchar(char c)
352{
353 int ret;
354
355 while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0)
356 ;
357}