blob: 70d135e0cc47c37d148eb97f7d97219cb33b1412 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Video configuration
3#
4
5menu "Graphics support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02006 depends on HAS_IOMEM
Linus Torvalds1da177e2005-04-16 15:20:36 -07007
Randy Dunlap179b0252007-10-16 01:29:39 -07008source "drivers/char/agp/Kconfig"
9
Dave Airliec0e09202008-05-29 10:09:59 +100010source "drivers/gpu/drm/Kconfig"
Antonino A. Daplasba707102006-06-26 00:26:37 -070011
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -070012config VGASTATE
13 tristate
14 default n
15
Luming Yu23b0f012007-05-09 21:07:05 +080016config VIDEO_OUTPUT_CONTROL
17 tristate "Lowlevel video output switch controls"
Luming Yu23b0f012007-05-09 21:07:05 +080018 help
19 This framework adds support for low-level control of the video
20 output switch.
21
Randy Dunlap179b0252007-10-16 01:29:39 -070022menuconfig FB
Linus Torvalds1da177e2005-04-16 15:20:36 -070023 tristate "Support for frame buffer devices"
24 ---help---
25 The frame buffer device provides an abstraction for the graphics
26 hardware. It represents the frame buffer of some video hardware and
27 allows application software to access the graphics hardware through
28 a well-defined interface, so the software doesn't need to know
29 anything about the low-level (hardware register) stuff.
30
31 Frame buffer devices work identically across the different
32 architectures supported by Linux and make the implementation of
33 application programs easier and more portable; at this point, an X
34 server exists which uses the frame buffer device exclusively.
35 On several non-X86 architectures, the frame buffer device is the
36 only way to use the graphics hardware.
37
38 The device is accessed through special device nodes, usually located
39 in the /dev directory, i.e. /dev/fb*.
40
41 You need an utility program called fbset to make full use of frame
42 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
43 and the Framebuffer-HOWTO at
44 <http://www.tahallah.demon.co.uk/programming/prog.html> for more
45 information.
46
47 Say Y here and to the driver for your graphics board below if you
48 are compiling a kernel for a non-x86 architecture.
49
50 If you are compiling for the x86 architecture, you can say Y if you
51 want to play with it, but it is not essential. Please note that
52 running graphical applications that directly touch the hardware
53 (e.g. an accelerated X server) and that are not frame buffer
54 device-aware may cause unexpected results. If unsure, say N.
55
James Simmonse0e34ef2007-02-10 14:15:43 +000056config FIRMWARE_EDID
57 bool "Enable firmware EDID"
58 depends on FB
59 default n
60 ---help---
61 This enables access to the EDID transferred from the firmware.
62 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
63 transfers do not work for your driver and if you are using
64 nvidiafb, i810fb or savagefb.
65
66 In general, choosing Y for this option is safe. If you
67 experience extremely long delays while booting before you get
68 something on your display, try setting this to N. Matrox cards in
69 combination with certain motherboards and monitors are known to
70 suffer from this problem.
71
Dennis Munsiefc5891c2006-10-03 01:14:42 -070072config FB_DDC
73 tristate
James Simmonse0e34ef2007-02-10 14:15:43 +000074 depends on FB
75 select I2C_ALGOBIT
76 select I2C
Dennis Munsiefc5891c2006-10-03 01:14:42 -070077 default n
78
Linus Torvalds1da177e2005-04-16 15:20:36 -070079config FB_CFB_FILLRECT
80 tristate
81 depends on FB
82 default n
83 ---help---
84 Include the cfb_fillrect function for generic software rectangle
85 filling. This is used by drivers that don't provide their own
86 (accelerated) version.
87
88config FB_CFB_COPYAREA
89 tristate
90 depends on FB
91 default n
92 ---help---
93 Include the cfb_copyarea function for generic software area copying.
94 This is used by drivers that don't provide their own (accelerated)
95 version.
96
97config FB_CFB_IMAGEBLIT
98 tristate
99 depends on FB
100 default n
101 ---help---
102 Include the cfb_imageblit function for generic software image
103 blitting. This is used by drivers that don't provide their own
104 (accelerated) version.
105
Pavel Pisa779121e2007-10-16 01:29:21 -0700106config FB_CFB_REV_PIXELS_IN_BYTE
107 bool
108 depends on FB
109 default n
110 ---help---
111 Allow generic frame-buffer functions to work on displays with 1, 2
112 and 4 bits per pixel depths which has opposite order of pixels in
113 byte order to bytes in long order.
114
Antonino A. Daplas68648ed2007-05-08 00:38:57 -0700115config FB_SYS_FILLRECT
116 tristate
117 depends on FB
118 default n
119 ---help---
120 Include the sys_fillrect function for generic software rectangle
121 filling. This is used by drivers that don't provide their own
122 (accelerated) version and the framebuffer is in system RAM.
123
124config FB_SYS_COPYAREA
125 tristate
126 depends on FB
127 default n
128 ---help---
129 Include the sys_copyarea function for generic software area copying.
130 This is used by drivers that don't provide their own (accelerated)
131 version and the framebuffer is in system RAM.
132
133config FB_SYS_IMAGEBLIT
134 tristate
135 depends on FB
136 default n
137 ---help---
138 Include the sys_imageblit function for generic software image
139 blitting. This is used by drivers that don't provide their own
140 (accelerated) version and the framebuffer is in system RAM.
141
Anton Vorontsove4c690e2008-04-28 02:14:49 -0700142menuconfig FB_FOREIGN_ENDIAN
143 bool "Framebuffer foreign endianness support"
144 depends on FB
145 ---help---
146 This menu will let you enable support for the framebuffers with
147 non-native endianness (e.g. Little-Endian framebuffer on a
148 Big-Endian machine). Most probably you don't have such hardware,
149 so it's safe to say "n" here.
150
151choice
152 prompt "Choice endianness support"
153 depends on FB_FOREIGN_ENDIAN
154
155config FB_BOTH_ENDIAN
156 bool "Support for Big- and Little-Endian framebuffers"
157
158config FB_BIG_ENDIAN
159 bool "Support for Big-Endian framebuffers only"
160
161config FB_LITTLE_ENDIAN
162 bool "Support for Little-Endian framebuffers only"
163
164endchoice
165
Antonino A. Daplas09aaf262007-05-08 00:39:03 -0700166config FB_SYS_FOPS
167 tristate
168 depends on FB
169 default n
170
Jaya Kumar60b59be2007-05-08 00:37:37 -0700171config FB_DEFERRED_IO
172 bool
173 depends on FB
Jaya Kumar60b59be2007-05-08 00:37:37 -0700174
Jaya Kumar03c33a42008-04-28 02:15:38 -0700175config FB_METRONOME
176 tristate
177 depends on FB
178 depends on FB_DEFERRED_IO
179
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700180config FB_HECUBA
181 tristate
182 depends on FB
183 depends on FB_DEFERRED_IO
184
Ondrej Zajiceka2684222007-02-12 00:54:49 -0800185config FB_SVGALIB
186 tristate
187 depends on FB
188 default n
189 ---help---
190 Common utility functions useful to fbdev drivers of VGA-based
191 cards.
192
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193config FB_MACMODES
194 tristate
195 depends on FB
196 default n
197
Michael Hanselmann5474c122006-06-25 05:47:08 -0700198config FB_BACKLIGHT
Michael Hanselmann4b755992006-07-30 03:04:19 -0700199 bool
200 depends on FB
201 select BACKLIGHT_LCD_SUPPORT
202 select BACKLIGHT_CLASS_DEVICE
203 default n
Michael Hanselmann5474c122006-06-25 05:47:08 -0700204
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205config FB_MODE_HELPERS
206 bool "Enable Video Mode Handling Helpers"
207 depends on FB
208 default n
209 ---help---
210 This enables functions for handling video modes using the
211 Generalized Timing Formula and the EDID parser. A few drivers rely
212 on this feature such as the radeonfb, rivafb, and the i810fb. If
213 your driver does not take advantage of this feature, choosing Y will
214 just increase the kernel size by about 5K.
215
216config FB_TILEBLITTING
217 bool "Enable Tile Blitting Support"
218 depends on FB
219 default n
220 ---help---
221 This enables tile blitting. Tile blitting is a drawing technique
222 where the screen is divided into rectangular sections (tiles), whereas
223 the standard blitting divides the screen into pixels. Because the
224 default drawing element is a tile, drawing functions will be passed
225 parameters in terms of number of tiles instead of number of pixels.
226 For example, to draw a single character, instead of using bitmaps,
227 an index to an array of bitmaps will be used. To clear or move a
228 rectangular section of a screen, the rectangle will be described in
229 terms of number of tiles in the x- and y-axis.
230
231 This is particularly important to one driver, matroxfb. If
232 unsure, say N.
233
Miguel Ojeda10ccaf42007-04-23 14:41:09 -0700234comment "Frame buffer hardware drivers"
James Simmonse0e34ef2007-02-10 14:15:43 +0000235 depends on FB
236
Linus Torvalds1da177e2005-04-16 15:20:36 -0700237config FB_CIRRUS
238 tristate "Cirrus Logic support"
239 depends on FB && (ZORRO || PCI)
240 select FB_CFB_FILLRECT
241 select FB_CFB_COPYAREA
242 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700243 ---help---
244 This enables support for Cirrus Logic GD542x/543x based boards on
245 Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
246
247 If you have a PCI-based system, this enables support for these
248 chips: GD-543x, GD-544x, GD-5480.
249
250 Please read the file <file:Documentation/fb/cirrusfb.txt>.
251
252 Say N unless you have such a graphics board or plan to get one
253 before you next recompile the kernel.
254
255config FB_PM2
256 tristate "Permedia2 support"
257 depends on FB && ((AMIGA && BROKEN) || PCI)
258 select FB_CFB_FILLRECT
259 select FB_CFB_COPYAREA
260 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 help
262 This is the frame buffer device driver for the Permedia2 AGP frame
263 buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
264 product page at
265 <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
266
267config FB_PM2_FIFO_DISCONNECT
268 bool "enable FIFO disconnect feature"
269 depends on FB_PM2 && PCI
270 help
271 Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
272
273config FB_ARMCLCD
274 tristate "ARM PrimeCell PL110 support"
275 depends on FB && ARM && ARM_AMBA
276 select FB_CFB_FILLRECT
277 select FB_CFB_COPYAREA
278 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700279 help
280 This framebuffer device driver is for the ARM PrimeCell PL110
281 Colour LCD controller. ARM PrimeCells provide the building
282 blocks for System on a Chip devices.
283
284 If you want to compile this as a module (=code which can be
285 inserted into and removed from the running kernel), say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500286 here and read <file:Documentation/kbuild/modules.txt>. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 will be called amba-clcd.
288
Marc Singer903e2bb2006-05-16 11:41:30 +0100289choice
290
291 depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
292 prompt "LCD Panel"
293 default FB_ARMCLCD_SHARP_LQ035Q7DB02
294
295config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
296 bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
297 help
298 This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
Matt LaPlantecab00892006-10-03 22:36:44 +0200299 color QVGA, HRTFT panel. The LogicPD device includes
Marc Singer903e2bb2006-05-16 11:41:30 +0100300 an integrated HRTFT controller IC.
301 The native resolution is 240x320.
302
303config FB_ARMCLCD_SHARP_LQ057Q3DC02
304 bool "LogicPD LCD 5.7\" QVGA"
305 help
306 This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
307 color QVGA, TFT panel. The LogicPD device includes an
308 The native resolution is 320x240.
309
310config FB_ARMCLCD_SHARP_LQ64D343
311 bool "LogicPD LCD 6.4\" VGA"
312 help
313 This is an implementation of the Sharp LQ64D343, a 6.4"
314 color VGA, TFT panel. The LogicPD device includes an
315 The native resolution is 640x480.
316
317config FB_ARMCLCD_SHARP_LQ10D368
318 bool "LogicPD LCD 10.4\" VGA"
319 help
320 This is an implementation of the Sharp LQ10D368, a 10.4"
321 color VGA, TFT panel. The LogicPD device includes an
322 The native resolution is 640x480.
323
324
325config FB_ARMCLCD_SHARP_LQ121S1DG41
326 bool "LogicPD LCD 12.1\" SVGA"
327 help
328 This is an implementation of the Sharp LQ121S1DG41, a 12.1"
329 color SVGA, TFT panel. The LogicPD device includes an
330 The native resolution is 800x600.
331
332 This panel requires a clock rate may be an integer fraction
333 of the base LCDCLK frequency. The driver will select the
334 highest frequency available that is lower than the maximum
335 allowed. The panel may flicker if the clock rate is
336 slower than the recommended minimum.
337
338config FB_ARMCLCD_AUO_A070VW01_WIDE
339 bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
340 help
341 This is an implementation of the AU Optronics, a 7.0"
342 WIDE Color. The native resolution is 234x480.
343
344config FB_ARMCLCD_HITACHI
345 bool "Hitachi Wide Screen 800x480"
346 help
347 This is an implementation of the Hitachi 800x480.
348
349endchoice
350
351
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352config FB_ACORN
353 bool "Acorn VIDC support"
354 depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
355 select FB_CFB_FILLRECT
356 select FB_CFB_COPYAREA
357 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358 help
359 This is the frame buffer device driver for the Acorn VIDC graphics
360 hardware found in Acorn RISC PCs and other ARM-based machines. If
361 unsure, say N.
362
363config FB_CLPS711X
364 bool "CLPS711X LCD support"
365 depends on (FB = y) && ARM && ARCH_CLPS711X
366 select FB_CFB_FILLRECT
367 select FB_CFB_COPYAREA
368 select FB_CFB_IMAGEBLIT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800369 help
370 Say Y to enable the Framebuffer driver for the CLPS7111 and
371 EP7212 processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372
373config FB_SA1100
374 bool "SA-1100 LCD support"
375 depends on (FB = y) && ARM && ARCH_SA1100
376 select FB_CFB_FILLRECT
377 select FB_CFB_COPYAREA
378 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700379 help
380 This is a framebuffer device for the SA-1100 LCD Controller.
381 See <http://www.linux-fbdev.org/> for information on framebuffer
382 devices.
383
384 If you plan to use the LCD display with your SA-1100 system, say
385 Y here.
386
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700387config FB_IMX
388 tristate "Motorola i.MX LCD support"
389 depends on FB && ARM && ARCH_IMX
390 select FB_CFB_FILLRECT
391 select FB_CFB_COPYAREA
392 select FB_CFB_IMAGEBLIT
Sascha Hauer7c2f891c2005-05-01 08:59:24 -0700393
Linus Torvalds1da177e2005-04-16 15:20:36 -0700394config FB_CYBER2000
395 tristate "CyberPro 2000/2010/5000 support"
396 depends on FB && PCI && (BROKEN || !SPARC64)
397 select FB_CFB_FILLRECT
398 select FB_CFB_COPYAREA
399 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400 help
401 This enables support for the Integraphics CyberPro 20x0 and 5000
402 VGA chips used in the Rebel.com Netwinder and other machines.
403 Say Y if you have a NetWinder or a graphics card containing this
404 device, otherwise say N.
405
406config FB_APOLLO
407 bool
408 depends on (FB = y) && APOLLO
409 default y
410 select FB_CFB_FILLRECT
411 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700412
413config FB_Q40
414 bool
415 depends on (FB = y) && Q40
416 default y
417 select FB_CFB_FILLRECT
418 select FB_CFB_COPYAREA
419 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700420
421config FB_AMIGA
422 tristate "Amiga native chipset support"
423 depends on FB && AMIGA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700424 help
425 This is the frame buffer device driver for the builtin graphics
426 chipset found in Amigas.
427
428 To compile this driver as a module, choose M here: the
429 module will be called amifb.
430
431config FB_AMIGA_OCS
432 bool "Amiga OCS chipset support"
433 depends on FB_AMIGA
434 help
435 This enables support for the original Agnus and Denise video chips,
436 found in the Amiga 1000 and most A500's and A2000's. If you intend
437 to run Linux on any of these systems, say Y; otherwise say N.
438
439config FB_AMIGA_ECS
440 bool "Amiga ECS chipset support"
441 depends on FB_AMIGA
442 help
443 This enables support for the Enhanced Chip Set, found in later
444 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
445 you intend to run Linux on any of these systems, say Y; otherwise
446 say N.
447
448config FB_AMIGA_AGA
449 bool "Amiga AGA chipset support"
450 depends on FB_AMIGA
451 help
452 This enables support for the Advanced Graphics Architecture (also
453 known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
454 and CD32. If you intend to run Linux on any of these systems, say Y;
455 otherwise say N.
456
Linus Torvalds1da177e2005-04-16 15:20:36 -0700457config FB_FM2
458 bool "Amiga FrameMaster II/Rainbow II support"
459 depends on (FB = y) && ZORRO
460 select FB_CFB_FILLRECT
461 select FB_CFB_COPYAREA
462 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463 help
464 This is the frame buffer device driver for the Amiga FrameMaster
465 card from BSC (exhibited 1992 but not shipped as a CBM product).
466
Jaya Kumar1154ea72005-06-21 17:17:04 -0700467config FB_ARC
468 tristate "Arc Monochrome LCD board support"
469 depends on FB && X86
Antonino A. Daplas922e6f92007-05-08 00:38:58 -0700470 select FB_SYS_FILLRECT
471 select FB_SYS_COPYAREA
472 select FB_SYS_IMAGEBLIT
Antonino A. Daplasd9a05f12007-05-08 00:39:04 -0700473 select FB_SYS_FOPS
Jaya Kumar1154ea72005-06-21 17:17:04 -0700474 help
475 This enables support for the Arc Monochrome LCD board. The board
476 is based on the KS-108 lcd controller and is typically a matrix
477 of 2*n chips. This driver was tested with a 128x64 panel. This
478 driver supports it for use with x86 SBCs through a 16 bit GPIO
Matt LaPlante09509602006-10-03 22:31:37 +0200479 interface (8 bit data, 8 bit control). If you anticipate using
Jaya Kumar1154ea72005-06-21 17:17:04 -0700480 this driver, say Y or M; otherwise say N. You must specify the
481 GPIO IO address to be used for setting control and data.
482
Linus Torvalds1da177e2005-04-16 15:20:36 -0700483config FB_ATARI
484 bool "Atari native chipset support"
Michael Schmitza1005012007-05-01 22:32:39 +0200485 depends on (FB = y) && ATARI
486 select FB_CFB_FILLRECT
487 select FB_CFB_COPYAREA
488 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489 help
490 This is the frame buffer device driver for the builtin graphics
491 chipset found in Ataris.
492
493config FB_OF
494 bool "Open Firmware frame buffer device support"
Stephen Rothwellbed59272007-03-04 17:04:44 +1100495 depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496 select FB_CFB_FILLRECT
497 select FB_CFB_COPYAREA
498 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499 select FB_MACMODES
500 help
501 Say Y if you want support with Open Firmware for your graphics
502 board.
503
504config FB_CONTROL
505 bool "Apple \"control\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700506 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700507 select FB_CFB_FILLRECT
508 select FB_CFB_COPYAREA
509 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510 select FB_MACMODES
511 help
512 This driver supports a frame buffer for the graphics adapter in the
513 Power Macintosh 7300 and others.
514
515config FB_PLATINUM
516 bool "Apple \"platinum\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700517 depends on (FB = y) && PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 select FB_CFB_FILLRECT
519 select FB_CFB_COPYAREA
520 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700521 select FB_MACMODES
522 help
523 This driver supports a frame buffer for the "platinum" graphics
524 adapter in some Power Macintoshes.
525
526config FB_VALKYRIE
527 bool "Apple \"valkyrie\" display support"
Olaf Heringa04b61d2006-07-30 03:03:52 -0700528 depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700529 select FB_CFB_FILLRECT
530 select FB_CFB_COPYAREA
531 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532 select FB_MACMODES
533 help
534 This driver supports a frame buffer for the "valkyrie" graphics
535 adapter in some Power Macintoshes.
536
537config FB_CT65550
538 bool "Chips 65550 display support"
Randy Dunlap0f8c02342007-11-14 16:58:45 -0800539 depends on (FB = y) && PPC32 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 select FB_CFB_FILLRECT
541 select FB_CFB_COPYAREA
542 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543 help
544 This is the frame buffer device driver for the Chips & Technologies
545 65550 graphics chip in PowerBooks.
546
547config FB_ASILIANT
Randy.Dunlape65c0852005-11-07 01:00:28 -0800548 bool "Asiliant (Chips) 69000 display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 depends on (FB = y) && PCI
550 select FB_CFB_FILLRECT
551 select FB_CFB_COPYAREA
552 select FB_CFB_IMAGEBLIT
Antonino A. Daplas4de0b1e2006-04-27 18:40:47 -0700553 help
554 This is the frame buffer device driver for the Asiliant 69030 chipset
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555
556config FB_IMSTT
557 bool "IMS Twin Turbo display support"
558 depends on (FB = y) && PCI
559 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560 select FB_MACMODES if PPC
561 help
562 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
563 many Macintosh and compatible computers.
564
Linus Torvalds1da177e2005-04-16 15:20:36 -0700565config FB_VGA16
566 tristate "VGA 16-color graphics support"
567 depends on FB && (X86 || PPC)
568 select FB_CFB_FILLRECT
569 select FB_CFB_COPYAREA
570 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700571 select VGASTATE
Antonino A. Daplasd60d2d82007-05-08 00:39:12 -0700572 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700573 help
574 This is the frame buffer device driver for VGA 16 color graphic
575 cards. Say Y if you have such a card.
576
577 To compile this driver as a module, choose M here: the
578 module will be called vga16fb.
579
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700580config FB_BF54X_LQ043
581 tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
Mike Frysingere7a05aa2008-04-28 02:15:47 -0700582 depends on FB && (BF54x) && !BF542
Michael Henneriche9fa7c42007-10-16 01:29:38 -0700583 select FB_CFB_FILLRECT
584 select FB_CFB_COPYAREA
585 select FB_CFB_IMAGEBLIT
586 help
587 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
588
Michael Hennerich99eeed47a2008-03-10 11:44:04 -0700589config FB_BFIN_T350MCQB
590 tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
591 depends on FB && BLACKFIN
592 select BFIN_GPTIMERS
593 select FB_CFB_FILLRECT
594 select FB_CFB_COPYAREA
595 select FB_CFB_IMAGEBLIT
596 help
597 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
598 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
599 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
600
601
Linus Torvalds1da177e2005-04-16 15:20:36 -0700602config FB_STI
603 tristate "HP STI frame buffer device support"
604 depends on FB && PARISC
605 select FB_CFB_FILLRECT
606 select FB_CFB_COPYAREA
607 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700608 default y
609 ---help---
610 STI refers to the HP "Standard Text Interface" which is a set of
611 BIOS routines contained in a ROM chip in HP PA-RISC based machines.
612 Enabling this option will implement the linux framebuffer device
613 using calls to the STI BIOS routines for initialisation.
614
615 If you enable this option, you will get a planar framebuffer device
616 /dev/fb which will work on the most common HP graphic cards of the
617 NGLE family, including the artist chips (in the 7xx and Bxxx series),
618 HCRX, HCRX24, CRX, CRX24 and VisEG series.
619
620 It is safe to enable this option, so you should probably say "Y".
621
622config FB_MAC
623 bool "Generic Macintosh display support"
624 depends on (FB = y) && MAC
625 select FB_CFB_FILLRECT
626 select FB_CFB_COPYAREA
627 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700628 select FB_MACMODES
629
Linus Torvalds1da177e2005-04-16 15:20:36 -0700630config FB_HP300
631 bool
Geert Uytterhoevenad7e4842008-05-18 20:47:09 +0200632 depends on (FB = y) && DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700633 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700634 default y
635
636config FB_TGA
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700637 tristate "TGA/SFB+ framebuffer support"
638 depends on FB && (ALPHA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700639 select FB_CFB_FILLRECT
640 select FB_CFB_COPYAREA
641 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800642 select BITREVERSE
Maciej W. Rozycki86c6f7d2007-05-08 00:37:48 -0700643 ---help---
644 This is the frame buffer device driver for generic TGA and SFB+
645 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
646 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
647 TURBOchannel cards, also known as PMAGD-A, -B and -C.
648
649 Due to hardware limitations ZLX-E2 and E3 cards are not supported
650 for DECstation 5000/200 systems. Additionally due to firmware
651 limitations these cards may cause troubles with booting DECstation
652 5000/240 and /260 systems, but are fully supported under Linux if
653 you manage to get it going. ;-)
654
655 Say Y if you have one of those.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700656
Michal Januszewski8bdb3a22007-10-16 01:28:26 -0700657config FB_UVESA
658 tristate "Userspace VESA VGA graphics support"
659 depends on FB && CONNECTOR
660 select FB_CFB_FILLRECT
661 select FB_CFB_COPYAREA
662 select FB_CFB_IMAGEBLIT
663 select FB_MODE_HELPERS
664 help
665 This is the frame buffer driver for generic VBE 2.0 compliant
666 graphic cards. It can also take advantage of VBE 3.0 features,
667 such as refresh rate adjustment.
668
669 This driver generally provides more features than vesafb but
670 requires a userspace helper application called 'v86d'. See
671 <file:Documentation/fb/uvesafb.txt> for more information.
672
673 If unsure, say N.
674
Linus Torvalds1da177e2005-04-16 15:20:36 -0700675config FB_VESA
676 bool "VESA VGA graphics support"
Brian Gerst0d078f62005-10-30 14:59:20 -0800677 depends on (FB = y) && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -0700678 select FB_CFB_FILLRECT
679 select FB_CFB_COPYAREA
680 select FB_CFB_IMAGEBLIT
James Simmonsc9b2ec42006-12-08 02:40:57 -0800681 select VIDEO_SELECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700682 help
683 This is the frame buffer device driver for generic VESA 2.0
684 compliant graphic cards. The older VESA 1.2 cards are not supported.
685 You will get a boot time penguin logo at no additional cost. Please
686 read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
687
Huang, Ying7c831722007-11-28 16:21:55 -0800688config FB_EFI
689 bool "EFI-based Framebuffer Support"
690 depends on (FB = y) && X86
691 select FB_CFB_FILLRECT
692 select FB_CFB_COPYAREA
693 select FB_CFB_IMAGEBLIT
694 help
695 This is the EFI frame buffer device driver. If the firmware on
696 your platform is UEFI2.0, select Y to add support for
697 Graphics Output Protocol for early console messages to appear.
698
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700699config FB_IMAC
700 bool "Intel-based Macintosh Framebuffer Support"
Edgar Hucekb64ef8a2006-08-13 23:24:16 -0700701 depends on (FB = y) && X86 && EFI
Edgar Hucek90b4f9a2006-06-26 00:26:59 -0700702 select FB_CFB_FILLRECT
703 select FB_CFB_COPYAREA
704 select FB_CFB_IMAGEBLIT
705 help
706 This is the frame buffer device driver for the Intel-based Macintosh
707
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700708config FB_N411
709 tristate "N411 Apollo/Hecuba devkit support"
Jaya Kumaraad09e52007-05-08 00:37:43 -0700710 depends on FB && X86 && MMU
Antonino A. Daplasd6774932007-05-08 00:39:00 -0700711 select FB_SYS_FILLRECT
712 select FB_SYS_COPYAREA
713 select FB_SYS_IMAGEBLIT
Antonino A. Daplas28d45642007-05-08 00:39:06 -0700714 select FB_SYS_FOPS
Jaya Kumaraad09e52007-05-08 00:37:43 -0700715 select FB_DEFERRED_IO
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700716 select FB_HECUBA
Jaya Kumaraad09e52007-05-08 00:37:43 -0700717 help
Jaya Kumar0e27aa32008-04-28 02:15:40 -0700718 This enables support for the Apollo display controller in its
719 Hecuba form using the n411 devkit.
Jaya Kumaraad09e52007-05-08 00:37:43 -0700720
Linus Torvalds1da177e2005-04-16 15:20:36 -0700721config FB_HGA
722 tristate "Hercules mono graphics support"
723 depends on FB && X86
724 select FB_CFB_FILLRECT
725 select FB_CFB_COPYAREA
726 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727 help
728 Say Y here if you have a Hercules mono graphics card.
729
730 To compile this driver as a module, choose M here: the
731 module will be called hgafb.
732
733 As this card technology is 15 years old, most people will answer N
734 here.
735
736config FB_HGA_ACCEL
737 bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
738 depends on FB_HGA && EXPERIMENTAL
739 ---help---
740 This will compile the Hercules mono graphics with
741 acceleration functions.
742
Linus Torvalds1da177e2005-04-16 15:20:36 -0700743config FB_SGIVW
744 tristate "SGI Visual Workstation framebuffer support"
745 depends on FB && X86_VISWS
746 select FB_CFB_FILLRECT
747 select FB_CFB_COPYAREA
748 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749 help
750 SGI Visual Workstation support for framebuffer graphics.
751
752config FB_GBE
753 bool "SGI Graphics Backend frame buffer support"
754 depends on (FB = y) && (SGI_IP32 || X86_VISWS)
755 select FB_CFB_FILLRECT
756 select FB_CFB_COPYAREA
757 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700758 help
759 This is the frame buffer device driver for SGI Graphics Backend.
760 This chip is used in SGI O2 and Visual Workstation 320/540.
761
762config FB_GBE_MEM
763 int "Video memory size in MB"
764 depends on FB_GBE
Martin Michlmayr80c410d2006-02-24 13:04:16 -0800765 default 4
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766 help
767 This is the amount of memory reserved for the framebuffer,
768 which can be any value between 1MB and 8MB.
769
Mark Fortescue1a571982005-11-29 19:34:44 -0800770config FB_SBUS
771 bool "SBUS and UPA framebuffers"
Adrian Bunk0b57ee92005-12-22 21:03:47 -0800772 depends on (FB = y) && SPARC
Mark Fortescue1a571982005-11-29 19:34:44 -0800773 help
774 Say Y if you want support for SBUS or UPA based frame buffer device.
775
Linus Torvalds1da177e2005-04-16 15:20:36 -0700776config FB_BW2
777 bool "BWtwo support"
Adrian Bunke0196302007-02-12 00:54:50 -0800778 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700779 select FB_CFB_FILLRECT
780 select FB_CFB_COPYAREA
781 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700782 help
783 This is the frame buffer device driver for the BWtwo frame buffer.
784
785config FB_CG3
786 bool "CGthree support"
Adrian Bunke0196302007-02-12 00:54:50 -0800787 depends on (FB = y) && (SPARC && FB_SBUS)
Mark Fortescue1a571982005-11-29 19:34:44 -0800788 select FB_CFB_FILLRECT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700789 select FB_CFB_COPYAREA
790 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700791 help
792 This is the frame buffer device driver for the CGthree frame buffer.
793
794config FB_CG6
795 bool "CGsix (GX,TurboGX) support"
Adrian Bunke0196302007-02-12 00:54:50 -0800796 depends on (FB = y) && (SPARC && FB_SBUS)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700797 select FB_CFB_COPYAREA
798 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700799 help
800 This is the frame buffer device driver for the CGsix (GX, TurboGX)
801 frame buffer.
802
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700803config FB_FFB
804 bool "Creator/Creator3D/Elite3D support"
805 depends on FB_SBUS && SPARC64
806 select FB_CFB_COPYAREA
807 select FB_CFB_IMAGEBLIT
808 help
809 This is the frame buffer device driver for the Creator, Creator3D,
810 and Elite3D graphics boards.
811
812config FB_TCX
813 bool "TCX (SS4/SS5 only) support"
814 depends on FB_SBUS
815 select FB_CFB_FILLRECT
816 select FB_CFB_COPYAREA
817 select FB_CFB_IMAGEBLIT
818 help
819 This is the frame buffer device driver for the TCX 24/8bit frame
820 buffer.
821
822config FB_CG14
823 bool "CGfourteen (SX) support"
824 depends on FB_SBUS
825 select FB_CFB_FILLRECT
826 select FB_CFB_COPYAREA
827 select FB_CFB_IMAGEBLIT
828 help
829 This is the frame buffer device driver for the CGfourteen frame
830 buffer on Desktop SPARCsystems with the SX graphics option.
831
832config FB_P9100
833 bool "P9100 (Sparcbook 3 only) support"
834 depends on FB_SBUS
835 select FB_CFB_FILLRECT
836 select FB_CFB_COPYAREA
837 select FB_CFB_IMAGEBLIT
838 help
839 This is the frame buffer device driver for the P9100 card
840 supported on Sparcbook 3 machines.
841
842config FB_LEO
843 bool "Leo (ZX) support"
844 depends on FB_SBUS
845 select FB_CFB_FILLRECT
846 select FB_CFB_COPYAREA
847 select FB_CFB_IMAGEBLIT
848 help
849 This is the frame buffer device driver for the SBUS-based Sun ZX
850 (leo) frame buffer cards.
851
852config FB_IGA
853 bool "IGA 168x display support"
David S. Millere11a6c22007-06-03 17:35:24 -0700854 depends on (FB = y) && SPARC32
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700855 select FB_CFB_FILLRECT
856 select FB_CFB_COPYAREA
857 select FB_CFB_IMAGEBLIT
858 help
859 This is the framebuffer device for the INTERGRAPHICS 1680 and
860 successor frame buffer cards.
861
862config FB_XVR500
863 bool "Sun XVR-500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700864 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700865 select FB_CFB_FILLRECT
866 select FB_CFB_COPYAREA
867 select FB_CFB_IMAGEBLIT
868 help
869 This is the framebuffer device for the Sun XVR-500 and similar
870 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200871 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700872 mostly initialized the card already. It is treated as a
873 completely dumb framebuffer device.
874
875config FB_XVR2500
876 bool "Sun XVR-2500 3DLABS Wildcat support"
David S. Millere11a6c22007-06-03 17:35:24 -0700877 depends on (FB = y) && PCI && SPARC64
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700878 select FB_CFB_FILLRECT
879 select FB_CFB_COPYAREA
880 select FB_CFB_IMAGEBLIT
881 help
882 This is the framebuffer device for the Sun XVR-2500 and similar
883 graphics cards based upon the 3DLABS Wildcat chipset. The driver
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200884 only works on sparc64 systems where the system firmware has
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -0700885 mostly initialized the card already. It is treated as a
886 completely dumb framebuffer device.
887
Linus Torvalds1da177e2005-04-16 15:20:36 -0700888config FB_PVR2
889 tristate "NEC PowerVR 2 display support"
890 depends on FB && SH_DREAMCAST
891 select FB_CFB_FILLRECT
892 select FB_CFB_COPYAREA
893 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700894 ---help---
895 Say Y here if you have a PowerVR 2 card in your box. If you plan to
896 run linux on your Dreamcast, you will have to say Y here.
897 This driver may or may not work on other PowerVR 2 cards, but is
898 totally untested. Use at your own risk. If unsure, say N.
899
900 To compile this driver as a module, choose M here: the
901 module will be called pvr2fb.
902
903 You can pass several parameters to the driver at boot time or at
904 module load time. The parameters look like "video=pvr2:XXX", where
905 the meaning of XXX can be found at the end of the main source file
906 (<file:drivers/video/pvr2fb.c>). Please see the file
907 <file:Documentation/fb/pvr2fb.txt>.
908
909config FB_EPSON1355
910 bool "Epson 1355 framebuffer support"
Paul Mundt1a3f2882007-07-17 04:05:48 -0700911 depends on (FB = y) && ARCH_CEIVA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700912 select FB_CFB_FILLRECT
913 select FB_CFB_COPYAREA
914 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700915 help
916 Build in support for the SED1355 Epson Research Embedded RAMDAC
917 LCD/CRT Controller (since redesignated as the S1D13505) as a
918 framebuffer. Product specs at
919 <http://www.erd.epson.com/vdc/html/products.htm>.
920
Randy Dunlapecc41d52005-11-07 01:00:29 -0800921config FB_S1D13XXX
922 tristate "Epson S1D13XXX framebuffer support"
923 depends on FB
924 select FB_CFB_FILLRECT
925 select FB_CFB_COPYAREA
926 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -0800927 help
928 Support for S1D13XXX framebuffer device family (currently only
929 working with S1D13806). Product specs at
930 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
931
Nicolas Ferre14340582007-05-10 22:23:26 -0700932config FB_ATMEL
933 tristate "AT91/AT32 LCD Controller support"
Andrew Victor2b3b3512008-01-24 15:10:39 +0100934 depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
Nicolas Ferre14340582007-05-10 22:23:26 -0700935 select FB_CFB_FILLRECT
936 select FB_CFB_COPYAREA
937 select FB_CFB_IMAGEBLIT
938 help
939 This enables support for the AT91/AT32 LCD Controller.
940
941config FB_INTSRAM
942 bool "Frame Buffer in internal SRAM"
943 depends on FB_ATMEL && ARCH_AT91SAM9261
944 help
945 Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
946 to let frame buffer in external SDRAM.
947
Nicolas Ferre250a2692007-07-21 04:37:59 -0700948config FB_ATMEL_STN
949 bool "Use a STN display with AT91/AT32 LCD Controller"
950 depends on FB_ATMEL && MACH_AT91SAM9261EK
951 default n
952 help
953 Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
954 Controller. Say N if you want to connect a TFT.
955
956 If unsure, say N.
957
Linus Torvalds1da177e2005-04-16 15:20:36 -0700958config FB_NVIDIA
959 tristate "nVidia Framebuffer Support"
960 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +0000961 select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700962 select FB_MODE_HELPERS
963 select FB_CFB_FILLRECT
964 select FB_CFB_COPYAREA
965 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -0800966 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -0700967 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700968 help
969 This driver supports graphics boards with the nVidia chips, TNT
970 and newer. For very old chipsets, such as the RIVA128, then use
971 the rivafb.
972 Say Y if you have such a graphics board.
973
974 To compile this driver as a module, choose M here: the
975 module will be called nvidiafb.
976
977config FB_NVIDIA_I2C
978 bool "Enable DDC Support"
Benjamin Herrenschmidt85f15032005-11-07 01:00:30 -0800979 depends on FB_NVIDIA
James Simmons166f60d2007-03-06 01:42:02 -0800980 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700981 help
982 This enables I2C support for nVidia Chipsets. This is used
983 only for getting EDID information from the attached display
984 allowing for robust video mode handling and switching.
985
986 Because fbdev-2.6 requires that drivers must be able to
987 independently validate video mode parameters, you should say Y
988 here.
989
Jean Delvare647f2e72007-05-10 22:23:29 -0700990config FB_NVIDIA_DEBUG
991 bool "Lots of debug output"
992 depends on FB_NVIDIA
993 default n
994 help
995 Say Y here if you want the nVidia driver to output all sorts
996 of debugging information to provide to the maintainer when
997 something goes wrong.
998
Michael Hanselmann5474c122006-06-25 05:47:08 -0700999config FB_NVIDIA_BACKLIGHT
1000 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001001 depends on FB_NVIDIA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001002 default y
1003 help
1004 Say Y here if you want to control the backlight of your display.
1005
Linus Torvalds1da177e2005-04-16 15:20:36 -07001006config FB_RIVA
1007 tristate "nVidia Riva support"
1008 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001009 select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001010 select FB_MODE_HELPERS
1011 select FB_CFB_FILLRECT
1012 select FB_CFB_COPYAREA
1013 select FB_CFB_IMAGEBLIT
Akinobu Mita1c667682006-12-08 02:36:26 -08001014 select BITREVERSE
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001015 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001016 help
1017 This driver supports graphics boards with the nVidia Riva/Geforce
1018 chips.
1019 Say Y if you have such a graphics board.
1020
1021 To compile this driver as a module, choose M here: the
1022 module will be called rivafb.
1023
1024config FB_RIVA_I2C
1025 bool "Enable DDC Support"
1026 depends on FB_RIVA
James Simmons166f60d2007-03-06 01:42:02 -08001027 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001028 help
1029 This enables I2C support for nVidia Chipsets. This is used
1030 only for getting EDID information from the attached display
1031 allowing for robust video mode handling and switching.
1032
1033 Because fbdev-2.6 requires that drivers must be able to
1034 independently validate video mode parameters, you should say Y
1035 here.
1036
1037config FB_RIVA_DEBUG
Jean Delvare647f2e72007-05-10 22:23:29 -07001038 bool "Lots of debug output"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001039 depends on FB_RIVA
1040 default n
1041 help
1042 Say Y here if you want the Riva driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001043 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001044 something goes wrong.
1045
Michael Hanselmann5474c122006-06-25 05:47:08 -07001046config FB_RIVA_BACKLIGHT
1047 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001048 depends on FB_RIVA
Michael Hanselmann5474c122006-06-25 05:47:08 -07001049 default y
1050 help
1051 Say Y here if you want to control the backlight of your display.
1052
Linus Torvalds1da177e2005-04-16 15:20:36 -07001053config FB_I810
1054 tristate "Intel 810/815 support (EXPERIMENTAL)"
Brian Gerst0d078f62005-10-30 14:59:20 -08001055 depends on FB && EXPERIMENTAL && PCI && X86_32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001056 select AGP
1057 select AGP_INTEL
1058 select FB_MODE_HELPERS
1059 select FB_CFB_FILLRECT
1060 select FB_CFB_COPYAREA
1061 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001062 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001063 help
1064 This driver supports the on-board graphics built in to the Intel 810
1065 and 815 chipsets. Say Y if you have and plan to use such a board.
1066
1067 To compile this driver as a module, choose M here: the
1068 module will be called i810fb.
1069
1070 For more information, please read
1071 <file:Documentation/fb/intel810.txt>
1072
1073config FB_I810_GTF
1074 bool "use VESA Generalized Timing Formula"
1075 depends on FB_I810
1076 help
1077 If you say Y, then the VESA standard, Generalized Timing Formula
1078 or GTF, will be used to calculate the required video timing values
1079 per video mode. Since the GTF allows nondiscrete timings
1080 (nondiscrete being a range of values as opposed to discrete being a
1081 set of values), you'll be able to use any combination of horizontal
1082 and vertical resolutions, and vertical refresh rates without having
1083 to specify your own timing parameters. This is especially useful
1084 to maximize the performance of an aging display, or if you just
1085 have a display with nonstandard dimensions. A VESA compliant
1086 monitor is recommended, but can still work with non-compliant ones.
1087 If you need or want this, then select this option. The timings may
1088 not be compliant with Intel's recommended values. Use at your own
1089 risk.
1090
1091 If you say N, the driver will revert to discrete video timings
1092 using a set recommended by Intel in their documentation.
1093
1094 If unsure, say N.
1095
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001096config FB_I810_I2C
1097 bool "Enable DDC Support"
Antonino A. Daplasdb845022005-09-13 01:25:02 -07001098 depends on FB_I810 && FB_I810_GTF
Antonino A. Daplase80987f2006-10-03 01:14:44 -07001099 select FB_DDC
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -07001100 help
1101
Alan Hourihanedbe7e422007-05-08 00:39:25 -07001102config FB_LE80578
1103 tristate "Intel LE80578 (Vermilion) support"
1104 depends on FB && PCI && X86
1105 select FB_MODE_HELPERS
1106 select FB_CFB_FILLRECT
1107 select FB_CFB_COPYAREA
1108 select FB_CFB_IMAGEBLIT
1109 help
1110 This driver supports the LE80578 (Vermilion Range) chipset
1111
1112config FB_CARILLO_RANCH
1113 tristate "Intel Carillo Ranch support"
1114 depends on FB_LE80578 && FB && PCI && X86
1115 help
1116 This driver supports the LE80578 (Carillo Ranch) board
1117
Linus Torvalds1da177e2005-04-16 15:20:36 -07001118config FB_INTEL
Maik Broemme0e170c72008-04-28 02:15:43 -07001119 tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
Dave Airlie0c187ad2006-03-23 11:20:08 +11001120 depends on FB && EXPERIMENTAL && PCI && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001121 select AGP
1122 select AGP_INTEL
1123 select FB_MODE_HELPERS
1124 select FB_CFB_FILLRECT
1125 select FB_CFB_COPYAREA
1126 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127 help
1128 This driver supports the on-board graphics built in to the Intel
Maik Broemme0e170c72008-04-28 02:15:43 -07001129 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001130 Say Y if you have and plan to use such a board.
1131
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001132 If you say Y here and want DDC/I2C support you must first say Y to
1133 "I2C support" and "I2C bit-banging support" in the character devices
1134 section.
1135
1136 If you say M here then "I2C support" and "I2C bit-banging support"
1137 can be build either as modules or built-in.
1138
1139 To compile this driver as a module, choose M here: the
Linus Torvalds1da177e2005-04-16 15:20:36 -07001140 module will be called intelfb.
1141
Christian Merkled463d342006-08-22 10:07:01 +10001142 For more information, please read <file:Documentation/fb/intelfb.txt>
1143
Linus Torvalds1da177e2005-04-16 15:20:36 -07001144config FB_INTEL_DEBUG
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001145 bool "Intel driver Debug Messages"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146 depends on FB_INTEL
1147 ---help---
1148 Say Y here if you want the Intel driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001149 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001150 something goes wrong.
1151
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001152config FB_INTEL_I2C
1153 bool "DDC/I2C for Intel framebuffer support"
1154 depends on FB_INTEL
James Simmons166f60d2007-03-06 01:42:02 -08001155 select FB_DDC
Dennis Munsie1f6e8442006-06-20 14:55:55 -04001156 default y
1157 help
1158 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1159
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160config FB_MATROX
1161 tristate "Matrox acceleration"
1162 depends on FB && PCI
1163 select FB_CFB_FILLRECT
1164 select FB_CFB_COPYAREA
1165 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001166 select FB_TILEBLITTING
1167 select FB_MACMODES if PPC_PMAC
1168 ---help---
1169 Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1170 Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1171 Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1172 Matrox G400, G450 or G550 card in your box.
1173
1174 To compile this driver as a module, choose M here: the
1175 module will be called matroxfb.
1176
1177 You can pass several parameters to the driver at boot time or at
1178 module load time. The parameters look like "video=matrox:XXX", and
1179 are described in <file:Documentation/fb/matroxfb.txt>.
1180
1181config FB_MATROX_MILLENIUM
1182 bool "Millennium I/II support"
1183 depends on FB_MATROX
1184 help
1185 Say Y here if you have a Matrox Millennium or Matrox Millennium II
1186 video card. If you select "Advanced lowlevel driver options" below,
1187 you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1188 packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1189 also use font widths different from 8.
1190
1191config FB_MATROX_MYSTIQUE
1192 bool "Mystique support"
1193 depends on FB_MATROX
1194 help
1195 Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1196 video card. If you select "Advanced lowlevel driver options" below,
1197 you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1198 packed pixel and 32 bpp packed pixel. You can also use font widths
1199 different from 8.
1200
1201config FB_MATROX_G
1202 bool "G100/G200/G400/G450/G550 support"
1203 depends on FB_MATROX
1204 ---help---
1205 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1206 video card. If you select "Advanced lowlevel driver options", you
1207 should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1208 pixel and 32 bpp packed pixel. You can also use font widths
1209 different from 8.
1210
1211 If you need support for G400 secondary head, you must first say Y to
1212 "I2C support" in the character devices section, and then to
1213 "Matrox I2C support" and "G400 second head support" here in the
1214 framebuffer section. G450/G550 secondary head and digital output
1215 are supported without additional modules.
1216
1217 The driver starts in monitor mode. You must use the matroxset tool
1218 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1219 swap primary and secondary head outputs, or to change output mode.
1220 Secondary head driver always start in 640x480 resolution and you
1221 must use fbset to change it.
1222
1223 Do not forget that second head supports only 16 and 32 bpp
1224 packed pixels, so it is a good idea to compile them into the kernel
1225 too. You can use only some font widths, as the driver uses generic
1226 painting procedures (the secondary head does not use acceleration
1227 engine).
1228
1229 G450/G550 hardware can display TV picture only from secondary CRTC,
1230 and it performs no scaling, so picture must have 525 or 625 lines.
1231
1232config FB_MATROX_I2C
1233 tristate "Matrox I2C support"
James Simmons166f60d2007-03-06 01:42:02 -08001234 depends on FB_MATROX
1235 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001236 ---help---
1237 This drivers creates I2C buses which are needed for accessing the
1238 DDC (I2C) bus present on all Matroxes, an I2C bus which
1239 interconnects Matrox optional devices, like MGA-TVO on G200 and
1240 G400, and the secondary head DDC bus, present on G400 only.
1241
1242 You can say Y or M here if you want to experiment with monitor
1243 detection code. You must say Y or M here if you want to use either
1244 second head of G400 or MGA-TVO on G200 or G400.
1245
1246 If you compile it as module, it will create a module named
1247 i2c-matroxfb.
1248
1249config FB_MATROX_MAVEN
1250 tristate "G400 second head support"
1251 depends on FB_MATROX_G && FB_MATROX_I2C
1252 ---help---
1253 WARNING !!! This support does not work with G450 !!!
1254
1255 Say Y or M here if you want to use a secondary head (meaning two
1256 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1257 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1258 secondary head output is blanked while you are in X. With XFree
1259 3.9.17 preview you can use both heads if you use SVGA over fbdev or
1260 the fbdev driver on first head and the fbdev driver on second head.
1261
1262 If you compile it as module, two modules are created,
1263 matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1264 both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1265 also load i2c-matroxfb to get it to run.
1266
1267 The driver starts in monitor mode and you must use the matroxset
1268 tool (available at
1269 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1270 PAL or NTSC or to swap primary and secondary head outputs.
1271 Secondary head driver also always start in 640x480 resolution, you
1272 must use fbset to change it.
1273
1274 Also do not forget that second head supports only 16 and 32 bpp
1275 packed pixels, so it is a good idea to compile them into the kernel
1276 too. You can use only some font widths, as the driver uses generic
1277 painting procedures (the secondary head does not use acceleration
1278 engine).
1279
1280config FB_MATROX_MULTIHEAD
1281 bool "Multihead support"
1282 depends on FB_MATROX
1283 ---help---
1284 Say Y here if you have more than one (supported) Matrox device in
1285 your computer and you want to use all of them for different monitors
1286 ("multihead"). If you have only one device, you should say N because
1287 the driver compiled with Y is larger and a bit slower, especially on
1288 ia32 (ix86).
1289
1290 If you said M to "Matrox unified accelerated driver" and N here, you
1291 will still be able to use several Matrox devices simultaneously:
1292 insert several instances of the module matroxfb into the kernel
1293 with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
1294 for the different Matrox devices. This method is slightly faster but
1295 uses 40 KB of kernel memory per Matrox card.
1296
1297 There is no need for enabling 'Matrox multihead support' if you have
1298 only one Matrox card in the box.
1299
Linus Torvalds1da177e2005-04-16 15:20:36 -07001300config FB_RADEON
1301 tristate "ATI Radeon display support"
1302 depends on FB && PCI
James Simmonse0e34ef2007-02-10 14:15:43 +00001303 select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001304 select FB_MODE_HELPERS
1305 select FB_CFB_FILLRECT
1306 select FB_CFB_COPYAREA
1307 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308 select FB_MACMODES if PPC_OF
1309 help
1310 Choose this option if you want to use an ATI Radeon graphics card as
1311 a framebuffer device. There are both PCI and AGP versions. You
1312 don't need to choose this to run the Radeon in plain VGA mode.
1313
1314 If you say Y here and want DDC/I2C support you must first say Y to
1315 "I2C support" and "I2C bit-banging support" in the character devices
1316 section.
1317
1318 If you say M here then "I2C support" and "I2C bit-banging support"
1319 can be build either as modules or built-in.
1320
1321 There is a product page at
Antonino A. Daplasf510a3c2005-09-09 13:04:41 -07001322 http://apps.ati.com/ATIcompare/
Michael Hanselmann5474c122006-06-25 05:47:08 -07001323
Linus Torvalds1da177e2005-04-16 15:20:36 -07001324config FB_RADEON_I2C
1325 bool "DDC/I2C for ATI Radeon support"
1326 depends on FB_RADEON
James Simmons166f60d2007-03-06 01:42:02 -08001327 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328 default y
1329 help
1330 Say Y here if you want DDC/I2C support for your Radeon board.
1331
Michael Hanselmann5474c122006-06-25 05:47:08 -07001332config FB_RADEON_BACKLIGHT
1333 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001334 depends on FB_RADEON
Michael Hanselmann5474c122006-06-25 05:47:08 -07001335 default y
1336 help
1337 Say Y here if you want to control the backlight of your display.
1338
Linus Torvalds1da177e2005-04-16 15:20:36 -07001339config FB_RADEON_DEBUG
1340 bool "Lots of debug output from Radeon driver"
1341 depends on FB_RADEON
1342 default n
1343 help
1344 Say Y here if you want the Radeon driver to output all sorts
Matt LaPlante09509602006-10-03 22:31:37 +02001345 of debugging information to provide to the maintainer when
Linus Torvalds1da177e2005-04-16 15:20:36 -07001346 something goes wrong.
1347
1348config FB_ATY128
1349 tristate "ATI Rage128 display support"
1350 depends on FB && PCI
1351 select FB_CFB_FILLRECT
1352 select FB_CFB_COPYAREA
1353 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001354 select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001355 select FB_MACMODES if PPC_PMAC
1356 help
1357 This driver supports graphics boards with the ATI Rage128 chips.
1358 Say Y if you have such a graphics board and read
1359 <file:Documentation/fb/aty128fb.txt>.
1360
1361 To compile this driver as a module, choose M here: the
1362 module will be called aty128fb.
1363
Michael Hanselmann5474c122006-06-25 05:47:08 -07001364config FB_ATY128_BACKLIGHT
1365 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001366 depends on FB_ATY128
Michael Hanselmann5474c122006-06-25 05:47:08 -07001367 default y
1368 help
1369 Say Y here if you want to control the backlight of your display.
1370
Linus Torvalds1da177e2005-04-16 15:20:36 -07001371config FB_ATY
1372 tristate "ATI Mach64 display support" if PCI || ATARI
Andrew Mortonf2e782e2006-04-10 22:55:45 -07001373 depends on FB && !SPARC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07001374 select FB_CFB_FILLRECT
1375 select FB_CFB_COPYAREA
1376 select FB_CFB_IMAGEBLIT
James Simmonse0e34ef2007-02-10 14:15:43 +00001377 select FB_BACKLIGHT if FB_ATY_BACKLIGHT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001378 select FB_MACMODES if PPC
1379 help
1380 This driver supports graphics boards with the ATI Mach64 chips.
1381 Say Y if you have such a graphics board.
1382
1383 To compile this driver as a module, choose M here: the
1384 module will be called atyfb.
1385
1386config FB_ATY_CT
1387 bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1388 depends on PCI && FB_ATY
Krzysztof Helt8d74c1f2007-05-23 13:57:46 -07001389 default y if SPARC64 && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001390 help
1391 Say Y here to support use of ATI's 64-bit Rage boards (or other
1392 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1393 framebuffer device. The ATI product support page for these boards
1394 is at <http://support.ati.com/products/pc/mach64/>.
1395
1396config FB_ATY_GENERIC_LCD
1397 bool "Mach64 generic LCD support (EXPERIMENTAL)"
1398 depends on FB_ATY_CT
1399 help
1400 Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1401 Rage XC, or Rage XL chipset.
1402
Linus Torvalds1da177e2005-04-16 15:20:36 -07001403config FB_ATY_GX
1404 bool "Mach64 GX support" if PCI
1405 depends on FB_ATY
1406 default y if ATARI
1407 help
1408 Say Y here to support use of the ATI Mach64 Graphics Expression
1409 board (or other boards based on the Mach64 GX chipset) as a
1410 framebuffer device. The ATI product support page for these boards
1411 is at
1412 <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1413
Michael Hanselmann5474c122006-06-25 05:47:08 -07001414config FB_ATY_BACKLIGHT
1415 bool "Support for backlight control"
James Simmonse0e34ef2007-02-10 14:15:43 +00001416 depends on FB_ATY
Michael Hanselmann5474c122006-06-25 05:47:08 -07001417 default y
1418 help
1419 Say Y here if you want to control the backlight of your display.
1420
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001421config FB_S3
1422 tristate "S3 Trio/Virge support"
1423 depends on FB && PCI
1424 select FB_CFB_FILLRECT
1425 select FB_CFB_COPYAREA
1426 select FB_CFB_IMAGEBLIT
1427 select FB_TILEBLITTING
1428 select FB_SVGALIB
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001429 select VGASTATE
Antonino A. Daplas8db51662007-05-08 00:39:14 -07001430 select FONT_8x16 if FRAMEBUFFER_CONSOLE
Ondrej Zajiceka2684222007-02-12 00:54:49 -08001431 ---help---
1432 Driver for graphics boards with S3 Trio / S3 Virge chip.
1433
Linus Torvalds1da177e2005-04-16 15:20:36 -07001434config FB_SAVAGE
1435 tristate "S3 Savage support"
1436 depends on FB && PCI && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001437 select FB_MODE_HELPERS
1438 select FB_CFB_FILLRECT
1439 select FB_CFB_COPYAREA
1440 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001441 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001442 help
1443 This driver supports notebooks and computers with S3 Savage PCI/AGP
1444 chips.
1445
1446 Say Y if you have such a graphics card.
1447
1448 To compile this driver as a module, choose M here; the module
1449 will be called savagefb.
1450
1451config FB_SAVAGE_I2C
1452 bool "Enable DDC2 Support"
1453 depends on FB_SAVAGE
James Simmons166f60d2007-03-06 01:42:02 -08001454 select FB_DDC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001455 help
1456 This enables I2C support for S3 Savage Chipsets. This is used
1457 only for getting EDID information from the attached display
1458 allowing for robust video mode handling and switching.
1459
1460 Because fbdev-2.6 requires that drivers must be able to
1461 independently validate video mode parameters, you should say Y
1462 here.
1463
1464config FB_SAVAGE_ACCEL
1465 bool "Enable Console Acceleration"
1466 depends on FB_SAVAGE
1467 default n
1468 help
1469 This option will compile in console acceleration support. If
1470 the resulting framebuffer console has bothersome glitches, then
1471 choose N here.
1472
1473config FB_SIS
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001474 tristate "SiS/XGI display support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001475 depends on FB && PCI
1476 select FB_CFB_FILLRECT
1477 select FB_CFB_COPYAREA
1478 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001479 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001480 This is the frame buffer device driver for the SiS 300, 315, 330
1481 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1482 Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001483
1484 To compile this driver as a module, choose M here; the module
1485 will be called sisfb.
1486
1487config FB_SIS_300
1488 bool "SiS 300 series support"
1489 depends on FB_SIS
1490 help
1491 Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1492
1493config FB_SIS_315
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001494 bool "SiS 315/330/340 series and XGI support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001495 depends on FB_SIS
1496 help
Thomas Winischhofer544393f2005-09-09 13:04:45 -07001497 Say Y here to support use of the SiS 315, 330 and 340 series
1498 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1499 as XGI V3XT, V5, V8 and Z7.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001500
1501config FB_NEOMAGIC
1502 tristate "NeoMagic display support"
1503 depends on FB && PCI
1504 select FB_MODE_HELPERS
1505 select FB_CFB_FILLRECT
1506 select FB_CFB_COPYAREA
1507 select FB_CFB_IMAGEBLIT
Antonino A. Daplasb2f594f2007-05-08 00:38:38 -07001508 select VGASTATE
Linus Torvalds1da177e2005-04-16 15:20:36 -07001509 help
1510 This driver supports notebooks with NeoMagic PCI chips.
1511 Say Y if you have such a graphics card.
1512
1513 To compile this driver as a module, choose M here: the
1514 module will be called neofb.
1515
1516config FB_KYRO
1517 tristate "IMG Kyro support"
1518 depends on FB && PCI
1519 select FB_CFB_FILLRECT
1520 select FB_CFB_COPYAREA
1521 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001522 help
1523 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1524 graphics board.
1525
1526 To compile this driver as a module, choose M here: the
1527 module will be called kyrofb.
1528
1529config FB_3DFX
1530 tristate "3Dfx Banshee/Voodoo3 display support"
1531 depends on FB && PCI
1532 select FB_CFB_IMAGEBLIT
1533 select FB_CFB_FILLRECT
1534 select FB_CFB_COPYAREA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001535 help
1536 This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
1537 chips. Say Y if you have such a graphics board.
1538
1539 To compile this driver as a module, choose M here: the
1540 module will be called tdfxfb.
1541
1542config FB_3DFX_ACCEL
1543 bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
1544 depends on FB_3DFX && EXPERIMENTAL
1545 ---help---
1546 This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
1547 with acceleration functions.
1548
1549
1550config FB_VOODOO1
1551 tristate "3Dfx Voodoo Graphics (sst1) support"
1552 depends on FB && PCI
1553 select FB_CFB_FILLRECT
1554 select FB_CFB_COPYAREA
1555 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001556 ---help---
1557 Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
1558 Voodoo2 (cvg) based graphics card.
1559
1560 To compile this driver as a module, choose M here: the
1561 module will be called sstfb.
1562
1563 WARNING: Do not use any application that uses the 3D engine
1564 (namely glide) while using this driver.
Dirk Hohndele4031492007-10-30 13:37:19 -07001565 Please read the <file:Documentation/fb/sstfb.txt> for supported
Linus Torvalds1da177e2005-04-16 15:20:36 -07001566 options and other important info support.
1567
Ondrej Zajicek558b7bd2007-05-09 02:35:31 -07001568config FB_VT8623
1569 tristate "VIA VT8623 support"
1570 depends on FB && PCI
1571 select FB_CFB_FILLRECT
1572 select FB_CFB_COPYAREA
1573 select FB_CFB_IMAGEBLIT
1574 select FB_TILEBLITTING
1575 select FB_SVGALIB
1576 select VGASTATE
1577 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1578 ---help---
1579 Driver for CastleRock integrated graphics core in the
1580 VIA VT8623 [Apollo CLE266] chipset.
1581
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001582config FB_CYBLA
1583 tristate "Cyberblade/i1 support"
Knut Petersen44637a12006-01-09 15:04:20 +01001584 depends on FB && PCI && X86_32 && !64BIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001585 select FB_CFB_IMAGEBLIT
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001586 select VIDEO_SELECT
1587 ---help---
1588 This driver is supposed to support the Trident Cyberblade/i1
1589 graphics core integrated in the VIA VT8601A North Bridge,
1590 also known as VIA Apollo PLE133.
1591
1592 Status:
1593 - Developed, tested and working on EPIA 5000 and EPIA 800.
1594 - Does work reliable on all systems with CRT/LCD connected to
1595 normal VGA ports.
1596 - Should work on systems that do use the internal LCD port, but
1597 this is absolutely not tested.
1598
1599 Character imageblit, copyarea and rectangle fill are hw accelerated,
1600 ypan scrolling is used by default.
1601
1602 Please do read <file:Documentation/fb/cyblafb/*>.
1603
1604 To compile this driver as a module, choose M here: the
1605 module will be called cyblafb.
1606
Linus Torvalds1da177e2005-04-16 15:20:36 -07001607config FB_TRIDENT
1608 tristate "Trident support"
1609 depends on FB && PCI
1610 select FB_CFB_FILLRECT
1611 select FB_CFB_COPYAREA
1612 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001613 ---help---
1614 This driver is supposed to support graphics boards with the
1615 Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
1616 but also on some motherboards. For more information, read
1617 <file:Documentation/fb/tridentfb.txt>
1618
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001619 Cyberblade/i1 support will be removed soon, use the cyblafb driver
1620 instead.
1621
Linus Torvalds1da177e2005-04-16 15:20:36 -07001622 Say Y if you have such a graphics board.
1623
Knut Petersen9fa68ea2005-09-09 13:04:56 -07001624
Linus Torvalds1da177e2005-04-16 15:20:36 -07001625 To compile this driver as a module, choose M here: the
1626 module will be called tridentfb.
1627
1628config FB_TRIDENT_ACCEL
1629 bool "Trident Acceleration functions (EXPERIMENTAL)"
1630 depends on FB_TRIDENT && EXPERIMENTAL
1631 ---help---
1632 This will compile the Trident frame buffer device with
1633 acceleration functions.
1634
Ondrej Zajicek681e1472007-05-09 02:35:31 -07001635config FB_ARK
1636 tristate "ARK 2000PV support"
1637 depends on FB && PCI
1638 select FB_CFB_FILLRECT
1639 select FB_CFB_COPYAREA
1640 select FB_CFB_IMAGEBLIT
1641 select FB_TILEBLITTING
1642 select FB_SVGALIB
1643 select VGASTATE
1644 select FONT_8x16 if FRAMEBUFFER_CONSOLE
1645 ---help---
1646 Driver for PCI graphics boards with ARK 2000PV chip
1647 and ICS 5342 RAMDAC.
1648
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649config FB_PM3
Krzysztof Heltf23a06f2007-05-10 22:23:25 -07001650 tristate "Permedia3 support (EXPERIMENTAL)"
1651 depends on FB && PCI && EXPERIMENTAL
1652 select FB_CFB_FILLRECT
1653 select FB_CFB_COPYAREA
1654 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001655 help
1656 This is the frame buffer device driver for the 3DLabs Permedia3
1657 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1658 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1659 and maybe other boards.
1660
Sebastian Siewior2ece5f432008-07-23 21:30:49 -07001661config FB_CARMINE
1662 tristate "Fujitsu carmine frame buffer support"
1663 depends on FB && PCI
1664 select FB_CFB_FILLRECT
1665 select FB_CFB_COPYAREA
1666 select FB_CFB_IMAGEBLIT
1667 help
1668 This is the frame buffer device driver for the Fujitsu Carmine chip.
1669 The driver provides two independent frame buffer devices.
1670
1671choice
1672 depends on FB_CARMINE
1673 prompt "DRAM timing"
1674 default FB_CARMINE_DRAM_EVAL
1675
1676config FB_CARMINE_DRAM_EVAL
1677 bool "Eval board timings"
1678 help
1679 Use timings which work on the eval card.
1680
1681config CARMINE_DRAM_CUSTOM
1682 bool "Custom board timings"
1683 help
1684 Use custom board timings.
1685endchoice
1686
Linus Torvalds1da177e2005-04-16 15:20:36 -07001687config FB_AU1100
1688 bool "Au1100 LCD Driver"
Ralf Baechled1709e42007-07-23 18:43:50 -07001689 depends on (FB = y) && MIPS && SOC_AU1100
1690 select FB_CFB_FILLRECT
1691 select FB_CFB_COPYAREA
1692 select FB_CFB_IMAGEBLIT
1693 help
1694 This is the framebuffer driver for the AMD Au1100 SOC. It can drive
1695 various panels and CRTs by passing in kernel cmd line option
1696 au1100fb:panel=<name>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001697
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001698config FB_AU1200
1699 bool "Au1200 LCD Driver"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001700 depends on (FB = y) && MIPS && SOC_AU1200
Ralf Baechlef95ec3c2006-03-27 01:17:27 -08001701 select FB_CFB_FILLRECT
1702 select FB_CFB_COPYAREA
1703 select FB_CFB_IMAGEBLIT
1704 help
1705 This is the framebuffer driver for the AMD Au1200 SOC. It can drive
1706 various panels and CRTs by passing in kernel cmd line option
1707 au1200fb:panel=<name>.
1708
Linus Torvalds1da177e2005-04-16 15:20:36 -07001709source "drivers/video/geode/Kconfig"
1710
Linus Torvalds1da177e2005-04-16 15:20:36 -07001711config FB_HIT
1712 tristate "HD64461 Frame Buffer support"
1713 depends on FB && HD64461
1714 select FB_CFB_FILLRECT
1715 select FB_CFB_COPYAREA
1716 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001717 help
1718 This is the frame buffer device driver for the Hitachi HD64461 LCD
1719 frame buffer card.
1720
1721config FB_PMAG_AA
1722 bool "PMAG-AA TURBOchannel framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001723 depends on (FB = y) && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001724 select FB_CFB_FILLRECT
1725 select FB_CFB_COPYAREA
1726 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001727 help
1728 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1729 used mainly in the MIPS-based DECstation series.
1730
1731config FB_PMAG_BA
Maciej W. Rozycki335dc502007-02-05 16:28:28 -08001732 tristate "PMAG-BA TURBOchannel framebuffer support"
1733 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001734 select FB_CFB_FILLRECT
1735 select FB_CFB_COPYAREA
1736 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001737 help
1738 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1739 used mainly in the MIPS-based DECstation series.
1740
1741config FB_PMAGB_B
Maciej W. Rozycki9084b002007-02-05 16:28:29 -08001742 tristate "PMAGB-B TURBOchannel framebuffer support"
Maciej W. Rozycki28ea28a2007-10-16 01:29:28 -07001743 depends on FB && TC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001744 select FB_CFB_FILLRECT
1745 select FB_CFB_COPYAREA
1746 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001747 help
1748 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1749 in the MIPS-based DECstation series. The card is currently only
1750 supported in 1280x1024x8 mode.
1751
1752config FB_MAXINE
1753 bool "Maxine (Personal DECstation) onboard framebuffer support"
Maciej W. Rozyckia9350002005-06-13 19:50:42 +00001754 depends on (FB = y) && MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001755 select FB_CFB_FILLRECT
1756 select FB_CFB_COPYAREA
1757 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001758 help
1759 Support for the onboard framebuffer (1024x768x8) in the Personal
1760 DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1761 Codename "Maxine").
1762
Linus Torvalds1da177e2005-04-16 15:20:36 -07001763config FB_G364
Yoichi Yuasab38817d2005-07-27 11:43:28 -07001764 bool "G364 frame buffer support"
1765 depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001766 select FB_CFB_FILLRECT
1767 select FB_CFB_COPYAREA
1768 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001769 help
1770 The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1771 Olivetti M700-10 systems.
1772
1773config FB_68328
1774 bool "Motorola 68328 native frame buffer support"
Geert Uytterhoeven833f8062007-03-16 13:38:23 -08001775 depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776 select FB_CFB_FILLRECT
1777 select FB_CFB_COPYAREA
1778 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001779 help
1780 Say Y here if you want to support the built-in frame buffer of
1781 the Motorola 68328 CPU family.
1782
1783config FB_PXA
1784 tristate "PXA LCD framebuffer support"
1785 depends on FB && ARCH_PXA
1786 select FB_CFB_FILLRECT
1787 select FB_CFB_COPYAREA
1788 select FB_CFB_IMAGEBLIT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001789 ---help---
1790 Frame buffer driver for the built-in LCD controller in the Intel
1791 PXA2x0 processor.
1792
1793 This driver is also available as a module ( = code which can be
1794 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001795 module will be called pxafb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001796 say M here and read <file:Documentation/kbuild/modules.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001797
1798 If unsure, say N.
1799
Eric Miao3c42a442008-04-30 00:52:26 -07001800config FB_PXA_SMARTPANEL
1801 bool "PXA Smartpanel LCD support"
Eric Miao7f1133c2008-04-30 00:52:27 -07001802 default n
Eric Miao3c42a442008-04-30 00:52:26 -07001803 depends on FB_PXA
1804
Linus Torvalds1da177e2005-04-16 15:20:36 -07001805config FB_PXA_PARAMETERS
1806 bool "PXA LCD command line parameters"
1807 default n
1808 depends on FB_PXA
1809 ---help---
1810 Enable the use of kernel command line or module parameters
1811 to configure the physical properties of the LCD panel when
1812 using the PXA LCD driver.
1813
1814 This option allows you to override the panel parameters
1815 supplied by the platform in order to support multiple
1816 different models of flatpanel. If you will only be using a
1817 single model of flatpanel then you can safely leave this
1818 option disabled.
1819
1820 <file:Documentation/fb/pxafb.txt> describes the available parameters.
1821
Mike Rapoport22caf042006-07-14 00:24:34 -07001822config FB_MBX
1823 tristate "2700G LCD framebuffer support"
1824 depends on FB && ARCH_PXA
1825 select FB_CFB_FILLRECT
1826 select FB_CFB_COPYAREA
1827 select FB_CFB_IMAGEBLIT
1828 ---help---
1829 Framebuffer driver for the Intel 2700G (Marathon) Graphics
1830 Accelerator
1831
1832config FB_MBX_DEBUG
1833 bool "Enable debugging info via debugfs"
1834 depends on FB_MBX && DEBUG_FS
1835 default n
1836 ---help---
1837 Enable this if you want debugging information using the debug
1838 filesystem (debugfs)
1839
1840 If unsure, say N.
1841
York Sun9b53a9e2008-04-28 02:15:34 -07001842config FB_FSL_DIU
1843 tristate "Freescale DIU framebuffer support"
1844 depends on FB && FSL_SOC
1845 select FB_CFB_FILLRECT
1846 select FB_CFB_COPYAREA
1847 select FB_CFB_IMAGEBLIT
1848 select PPC_LIB_RHEAP
1849 ---help---
1850 Framebuffer driver for the Freescale SoC DIU
1851
Randy Dunlapecc41d52005-11-07 01:00:29 -08001852config FB_W100
1853 tristate "W100 frame buffer support"
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001854 depends on FB && ARCH_PXA
Randy Dunlapecc41d52005-11-07 01:00:29 -08001855 select FB_CFB_FILLRECT
1856 select FB_CFB_COPYAREA
1857 select FB_CFB_IMAGEBLIT
Randy Dunlapecc41d52005-11-07 01:00:29 -08001858 ---help---
1859 Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
Philipp Zabele5dd3cb2008-07-04 09:59:52 -07001860 It can also drive the w3220 chip found on iPAQ hx4700.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001861
1862 This driver is also available as a module ( = code which can be
1863 inserted and removed from the running kernel whenever you want). The
YOSHIFUJI Hideaki74b4f042006-01-09 20:53:46 -08001864 module will be called w100fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001865 say M here and read <file:Documentation/kbuild/modules.txt>.
Randy Dunlapecc41d52005-11-07 01:00:29 -08001866
1867 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001868
Magnus Dammcfb4f5d2008-07-23 21:31:24 -07001869config FB_SH_MOBILE_LCDC
1870 tristate "SuperH Mobile LCDC framebuffer support"
1871 depends on FB && SUPERH
1872 select FB_CFB_FILLRECT
1873 select FB_CFB_COPYAREA
1874 select FB_CFB_IMAGEBLIT
1875 default m
1876 ---help---
1877 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1878
Arnaud Patard20fd5762005-09-09 13:10:07 -07001879config FB_S3C2410
1880 tristate "S3C2410 LCD framebuffer support"
1881 depends on FB && ARCH_S3C2410
1882 select FB_CFB_FILLRECT
1883 select FB_CFB_COPYAREA
1884 select FB_CFB_IMAGEBLIT
Arnaud Patard20fd5762005-09-09 13:10:07 -07001885 ---help---
1886 Frame buffer driver for the built-in LCD controller in the Samsung
1887 S3C2410 processor.
1888
1889 This driver is also available as a module ( = code which can be
1890 inserted and removed from the running kernel whenever you want). The
1891 module will be called s3c2410fb. If you want to compile it as a module,
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +05001892 say M here and read <file:Documentation/kbuild/modules.txt>.
Arnaud Patard20fd5762005-09-09 13:10:07 -07001893
1894 If unsure, say N.
1895config FB_S3C2410_DEBUG
1896 bool "S3C2410 lcd debug messages"
1897 depends on FB_S3C2410
1898 help
1899 Turn on debugging messages. Note that you can set/unset at run time
1900 through sysfs
1901
Ben Dooks5fc404e2007-02-20 13:58:21 -08001902config FB_SM501
1903 tristate "Silicon Motion SM501 framebuffer support"
1904 depends on FB && MFD_SM501
1905 select FB_CFB_FILLRECT
1906 select FB_CFB_COPYAREA
1907 select FB_CFB_IMAGEBLIT
1908 ---help---
1909 Frame buffer driver for the CRT and LCD controllers in the Silicon
1910 Motion SM501.
1911
1912 This driver is also available as a module ( = code which can be
1913 inserted and removed from the running kernel whenever you want). The
1914 module will be called sm501fb. If you want to compile it as a module,
Dirk Hohndele4031492007-10-30 13:37:19 -07001915 say M here and read <file:Documentation/kbuild/modules.txt>.
Ben Dooks5fc404e2007-02-20 13:58:21 -08001916
1917 If unsure, say N.
1918
1919
Vitaly Wool36c93662006-07-03 00:24:19 -07001920config FB_PNX4008_DUM
1921 tristate "Display Update Module support on Philips PNX4008 board"
1922 depends on FB && ARCH_PNX4008
1923 ---help---
1924 Say Y here to enable support for PNX4008 Display Update Module (DUM)
1925
1926config FB_PNX4008_DUM_RGB
1927 tristate "RGB Framebuffer support on Philips PNX4008 board"
1928 depends on FB_PNX4008_DUM
1929 select FB_CFB_FILLRECT
1930 select FB_CFB_COPYAREA
1931 select FB_CFB_IMAGEBLIT
1932 ---help---
1933 Say Y here to enable support for PNX4008 RGB Framebuffer
1934
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001935config FB_IBM_GXT4500
1936 tristate "Framebuffer support for IBM GXT4500P adaptor"
Randy Dunlap0058f472007-10-16 01:29:35 -07001937 depends on FB && PPC
Paul Mackerrasa3d89982006-12-10 02:20:42 -08001938 select FB_CFB_FILLRECT
1939 select FB_CFB_COPYAREA
1940 select FB_CFB_IMAGEBLIT
1941 ---help---
1942 Say Y here to enable support for the IBM GXT4500P display
1943 adaptor, found on some IBM System P (pSeries) machines.
1944
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001945config FB_PS3
Geert Uytterhoeven9e6b99b2007-06-16 08:05:38 +10001946 tristate "PS3 GPU framebuffer driver"
1947 depends on FB && PS3_PS3AV
Geert Uytterhoeven92c45792007-05-23 13:57:50 -07001948 select FB_SYS_FILLRECT
1949 select FB_SYS_COPYAREA
1950 select FB_SYS_IMAGEBLIT
1951 select FB_SYS_FOPS
Geert Uytterhoeven23e9c942007-07-21 04:37:49 -07001952 select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001953 ---help---
1954 Include support for the virtual frame buffer in the PS3 platform.
1955
1956config FB_PS3_DEFAULT_SIZE_M
1957 int "PS3 default frame buffer size (in MiB)"
1958 depends on FB_PS3
Geert Uytterhoeven50b25292007-07-21 04:37:50 -07001959 default 9
Geert Uytterhoeven310d8c12007-02-12 00:55:23 -08001960 ---help---
1961 This is the default size (in MiB) of the virtual frame buffer in
1962 the PS3.
1963 The default value can be overridden on the kernel command line
1964 using the "ps3fb" option (e.g. "ps3fb=9M");
1965
Andrei Konovalov147394c2007-05-08 00:40:18 -07001966config FB_XILINX
1967 tristate "Xilinx frame buffer support"
1968 depends on FB && XILINX_VIRTEX
1969 select FB_CFB_FILLRECT
1970 select FB_CFB_COPYAREA
1971 select FB_CFB_IMAGEBLIT
1972 ---help---
1973 Include support for the Xilinx ML300/ML403 reference design
1974 framebuffer. ML300 carries a 640*480 LCD display on the board,
1975 ML403 uses a standard DB15 VGA connector.
1976
Jaya Kumar03c33a42008-04-28 02:15:38 -07001977config FB_AM200EPD
1978 tristate "AM-200 E-Ink EPD devkit support"
Jaya Kumarde7c6d12008-03-19 17:01:10 -07001979 depends on FB && ARCH_PXA && MMU
1980 select FB_SYS_FILLRECT
1981 select FB_SYS_COPYAREA
1982 select FB_SYS_IMAGEBLIT
1983 select FB_SYS_FOPS
1984 select FB_DEFERRED_IO
Jaya Kumar03c33a42008-04-28 02:15:38 -07001985 select FB_METRONOME
Jaya Kumarde7c6d12008-03-19 17:01:10 -07001986 help
Jaya Kumar03c33a42008-04-28 02:15:38 -07001987 This enables support for the Metronome display controller used on
1988 the E-Ink AM-200 EPD devkit.
Jaya Kumarde7c6d12008-03-19 17:01:10 -07001989
Yoichi Yuasa5abe3b42008-07-23 21:31:40 -07001990config FB_COBALT
1991 tristate "Cobalt server LCD frame buffer support"
1992 depends on FB && MIPS_COBALT
1993
Nobuhiro Iwamatsu4a25e412008-07-23 21:31:46 -07001994config FB_SH7760
1995 bool "SH7760/SH7763 LCDC support"
1996 depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
1997 select FB_CFB_FILLRECT
1998 select FB_CFB_COPYAREA
1999 select FB_CFB_IMAGEBLIT
2000 help
2001 Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
2002 Supports display resolutions up to 1024x1024 pixel, grayscale and
2003 color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2004 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2005 panels <= 320 pixel horizontal resolution.
2006
Linus Torvalds1da177e2005-04-16 15:20:36 -07002007config FB_VIRTUAL
2008 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2009 depends on FB
Antonino A. Daplas87b48842007-05-08 00:39:01 -07002010 select FB_SYS_FILLRECT
2011 select FB_SYS_COPYAREA
2012 select FB_SYS_IMAGEBLIT
Antonino A. Daplas52102c02007-05-08 00:39:07 -07002013 select FB_SYS_FOPS
Linus Torvalds1da177e2005-04-16 15:20:36 -07002014 ---help---
2015 This is a `virtual' frame buffer device. It operates on a chunk of
2016 unswappable kernel memory instead of on the memory of a graphics
2017 board. This means you cannot see any output sent to this frame
2018 buffer device, while it does consume precious memory. The main use
2019 of this frame buffer device is testing and debugging the frame
2020 buffer subsystem. Do NOT enable it for normal systems! To protect
2021 the innocent, it has to be enabled explicitly at boot time using the
2022 kernel option `video=vfb:'.
2023
2024 To compile this driver as a module, choose M here: the
Mike Frysinger66cf7512006-10-03 01:14:41 -07002025 module will be called vfb. In order to load it, you must use
2026 the vfb_enable=1 option.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027
2028 If unsure, say N.
James Simmonse0e34ef2007-02-10 14:15:43 +00002029
Markus Armbruster4ee36dc2008-04-02 10:54:07 -07002030config XEN_FBDEV_FRONTEND
2031 tristate "Xen virtual frame buffer support"
2032 depends on FB && XEN
2033 select FB_SYS_FILLRECT
2034 select FB_SYS_COPYAREA
2035 select FB_SYS_IMAGEBLIT
2036 select FB_SYS_FOPS
2037 select FB_DEFERRED_IO
2038 default y
2039 help
2040 This driver implements the front-end of the Xen virtual
2041 frame buffer driver. It communicates with a back-end
2042 in another domain.
2043
Randy Dunlapf08f3892007-10-29 14:37:16 -07002044source "drivers/video/omap/Kconfig"
Randy Dunlap0058f472007-10-16 01:29:35 -07002045
Randy Dunlap179b0252007-10-16 01:29:39 -07002046source "drivers/video/backlight/Kconfig"
2047source "drivers/video/display/Kconfig"
2048
Linus Torvalds1da177e2005-04-16 15:20:36 -07002049if VT
2050 source "drivers/video/console/Kconfig"
2051endif
2052
2053if FB || SGI_NEWPORT_CONSOLE
2054 source "drivers/video/logo/Kconfig"
2055endif
2056
Linus Torvalds1da177e2005-04-16 15:20:36 -07002057endmenu