Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 1 | /* |
| 2 | * pc87427.c - hardware monitoring driver for the |
| 3 | * National Semiconductor PC87427 Super-I/O chip |
| 4 | * Copyright (C) 2006 Jean Delvare <khali@linux-fr.org> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * Supports the following chips: |
| 16 | * |
| 17 | * Chip #vin #fan #pwm #temp devid |
| 18 | * PC87427 - 8 - - 0xF2 |
| 19 | * |
| 20 | * This driver assumes that no more than one chip is present. |
| 21 | * Only fan inputs are supported so far, although the chip can do much more. |
| 22 | */ |
| 23 | |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/init.h> |
| 26 | #include <linux/slab.h> |
| 27 | #include <linux/jiffies.h> |
| 28 | #include <linux/platform_device.h> |
| 29 | #include <linux/hwmon.h> |
| 30 | #include <linux/hwmon-sysfs.h> |
| 31 | #include <linux/err.h> |
| 32 | #include <linux/mutex.h> |
| 33 | #include <linux/sysfs.h> |
Jean Delvare | ce7ee4e | 2007-05-08 17:21:59 +0200 | [diff] [blame^] | 34 | #include <linux/ioport.h> |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 35 | #include <asm/io.h> |
| 36 | |
| 37 | static struct platform_device *pdev; |
| 38 | |
| 39 | #define DRVNAME "pc87427" |
| 40 | |
| 41 | /* The lock mutex protects both the I/O accesses (needed because the |
| 42 | device is using banked registers) and the register cache (needed to keep |
| 43 | the data in the registers and the cache in sync at any time). */ |
| 44 | struct pc87427_data { |
| 45 | struct class_device *class_dev; |
| 46 | struct mutex lock; |
| 47 | int address[2]; |
| 48 | const char *name; |
| 49 | |
| 50 | unsigned long last_updated; /* in jiffies */ |
| 51 | u8 fan_enabled; /* bit vector */ |
| 52 | u16 fan[8]; /* register values */ |
| 53 | u16 fan_min[8]; /* register values */ |
| 54 | u8 fan_status[8]; /* register values */ |
| 55 | }; |
| 56 | |
| 57 | /* |
| 58 | * Super-I/O registers and operations |
| 59 | */ |
| 60 | |
| 61 | #define SIOREG_LDSEL 0x07 /* Logical device select */ |
| 62 | #define SIOREG_DEVID 0x20 /* Device ID */ |
| 63 | #define SIOREG_ACT 0x30 /* Device activation */ |
| 64 | #define SIOREG_MAP 0x50 /* I/O or memory mapping */ |
| 65 | #define SIOREG_IOBASE 0x60 /* I/O base address */ |
| 66 | |
| 67 | static const u8 logdev[2] = { 0x09, 0x14 }; |
| 68 | static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" }; |
| 69 | #define LD_FAN 0 |
| 70 | #define LD_IN 1 |
| 71 | #define LD_TEMP 1 |
| 72 | |
| 73 | static inline void superio_outb(int sioaddr, int reg, int val) |
| 74 | { |
| 75 | outb(reg, sioaddr); |
| 76 | outb(val, sioaddr + 1); |
| 77 | } |
| 78 | |
| 79 | static inline int superio_inb(int sioaddr, int reg) |
| 80 | { |
| 81 | outb(reg, sioaddr); |
| 82 | return inb(sioaddr + 1); |
| 83 | } |
| 84 | |
| 85 | static inline void superio_exit(int sioaddr) |
| 86 | { |
| 87 | outb(0x02, sioaddr); |
| 88 | outb(0x02, sioaddr + 1); |
| 89 | } |
| 90 | |
| 91 | /* |
| 92 | * Logical devices |
| 93 | */ |
| 94 | |
| 95 | #define REGION_LENGTH 32 |
| 96 | #define PC87427_REG_BANK 0x0f |
| 97 | #define BANK_FM(nr) (nr) |
| 98 | #define BANK_FT(nr) (0x08 + (nr)) |
| 99 | #define BANK_FC(nr) (0x10 + (nr) * 2) |
| 100 | |
| 101 | /* |
| 102 | * I/O access functions |
| 103 | */ |
| 104 | |
| 105 | /* ldi is the logical device index */ |
| 106 | static inline int pc87427_read8(struct pc87427_data *data, u8 ldi, u8 reg) |
| 107 | { |
| 108 | return inb(data->address[ldi] + reg); |
| 109 | } |
| 110 | |
| 111 | /* Must be called with data->lock held, except during init */ |
| 112 | static inline int pc87427_read8_bank(struct pc87427_data *data, u8 ldi, |
| 113 | u8 bank, u8 reg) |
| 114 | { |
| 115 | outb(bank, data->address[ldi] + PC87427_REG_BANK); |
| 116 | return inb(data->address[ldi] + reg); |
| 117 | } |
| 118 | |
| 119 | /* Must be called with data->lock held, except during init */ |
| 120 | static inline void pc87427_write8_bank(struct pc87427_data *data, u8 ldi, |
| 121 | u8 bank, u8 reg, u8 value) |
| 122 | { |
| 123 | outb(bank, data->address[ldi] + PC87427_REG_BANK); |
| 124 | outb(value, data->address[ldi] + reg); |
| 125 | } |
| 126 | |
| 127 | /* |
| 128 | * Fan registers and conversions |
| 129 | */ |
| 130 | |
| 131 | /* fan data registers are 16-bit wide */ |
| 132 | #define PC87427_REG_FAN 0x12 |
| 133 | #define PC87427_REG_FAN_MIN 0x14 |
| 134 | #define PC87427_REG_FAN_STATUS 0x10 |
| 135 | |
| 136 | #define FAN_STATUS_STALL (1 << 3) |
| 137 | #define FAN_STATUS_LOSPD (1 << 1) |
| 138 | #define FAN_STATUS_MONEN (1 << 0) |
| 139 | |
| 140 | /* Dedicated function to read all registers related to a given fan input. |
| 141 | This saves us quite a few locks and bank selections. |
| 142 | Must be called with data->lock held. |
| 143 | nr is from 0 to 7 */ |
| 144 | static void pc87427_readall_fan(struct pc87427_data *data, u8 nr) |
| 145 | { |
| 146 | int iobase = data->address[LD_FAN]; |
| 147 | |
| 148 | outb(BANK_FM(nr), iobase + PC87427_REG_BANK); |
| 149 | data->fan[nr] = inw(iobase + PC87427_REG_FAN); |
| 150 | data->fan_min[nr] = inw(iobase + PC87427_REG_FAN_MIN); |
| 151 | data->fan_status[nr] = inb(iobase + PC87427_REG_FAN_STATUS); |
| 152 | /* Clear fan alarm bits */ |
| 153 | outb(data->fan_status[nr], iobase + PC87427_REG_FAN_STATUS); |
| 154 | } |
| 155 | |
| 156 | /* The 2 LSB of fan speed registers are used for something different. |
| 157 | The actual 2 LSB of the measurements are not available. */ |
| 158 | static inline unsigned long fan_from_reg(u16 reg) |
| 159 | { |
| 160 | reg &= 0xfffc; |
| 161 | if (reg == 0x0000 || reg == 0xfffc) |
| 162 | return 0; |
| 163 | return 5400000UL / reg; |
| 164 | } |
| 165 | |
| 166 | /* The 2 LSB of the fan speed limit registers are not significant. */ |
| 167 | static inline u16 fan_to_reg(unsigned long val) |
| 168 | { |
| 169 | if (val < 83UL) |
| 170 | return 0xffff; |
| 171 | if (val >= 1350000UL) |
| 172 | return 0x0004; |
| 173 | return ((1350000UL + val / 2) / val) << 2; |
| 174 | } |
| 175 | |
| 176 | /* |
| 177 | * Data interface |
| 178 | */ |
| 179 | |
| 180 | static struct pc87427_data *pc87427_update_device(struct device *dev) |
| 181 | { |
| 182 | struct pc87427_data *data = dev_get_drvdata(dev); |
| 183 | int i; |
| 184 | |
| 185 | mutex_lock(&data->lock); |
| 186 | if (!time_after(jiffies, data->last_updated + HZ) |
| 187 | && data->last_updated) |
| 188 | goto done; |
| 189 | |
| 190 | /* Fans */ |
| 191 | for (i = 0; i < 8; i++) { |
| 192 | if (!(data->fan_enabled & (1 << i))) |
| 193 | continue; |
| 194 | pc87427_readall_fan(data, i); |
| 195 | } |
| 196 | data->last_updated = jiffies; |
| 197 | |
| 198 | done: |
| 199 | mutex_unlock(&data->lock); |
| 200 | return data; |
| 201 | } |
| 202 | |
| 203 | static ssize_t show_fan_input(struct device *dev, struct device_attribute |
| 204 | *devattr, char *buf) |
| 205 | { |
| 206 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 207 | struct pc87427_data *data = pc87427_update_device(dev); |
| 208 | int nr = attr->index; |
| 209 | |
| 210 | return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr])); |
| 211 | } |
| 212 | |
| 213 | static ssize_t show_fan_min(struct device *dev, struct device_attribute |
| 214 | *devattr, char *buf) |
| 215 | { |
| 216 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 217 | struct pc87427_data *data = pc87427_update_device(dev); |
| 218 | int nr = attr->index; |
| 219 | |
| 220 | return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr])); |
| 221 | } |
| 222 | |
| 223 | static ssize_t show_fan_alarm(struct device *dev, struct device_attribute |
| 224 | *devattr, char *buf) |
| 225 | { |
| 226 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 227 | struct pc87427_data *data = pc87427_update_device(dev); |
| 228 | int nr = attr->index; |
| 229 | |
| 230 | return sprintf(buf, "%d\n", !!(data->fan_status[nr] |
| 231 | & FAN_STATUS_LOSPD)); |
| 232 | } |
| 233 | |
| 234 | static ssize_t show_fan_fault(struct device *dev, struct device_attribute |
| 235 | *devattr, char *buf) |
| 236 | { |
| 237 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 238 | struct pc87427_data *data = pc87427_update_device(dev); |
| 239 | int nr = attr->index; |
| 240 | |
| 241 | return sprintf(buf, "%d\n", !!(data->fan_status[nr] |
| 242 | & FAN_STATUS_STALL)); |
| 243 | } |
| 244 | |
| 245 | static ssize_t set_fan_min(struct device *dev, struct device_attribute |
| 246 | *devattr, const char *buf, size_t count) |
| 247 | { |
| 248 | struct pc87427_data *data = dev_get_drvdata(dev); |
| 249 | struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| 250 | int nr = attr->index; |
| 251 | unsigned long val = simple_strtoul(buf, NULL, 10); |
| 252 | int iobase = data->address[LD_FAN]; |
| 253 | |
| 254 | mutex_lock(&data->lock); |
| 255 | outb(BANK_FM(nr), iobase + PC87427_REG_BANK); |
| 256 | /* The low speed limit registers are read-only while monitoring |
| 257 | is enabled, so we have to disable monitoring, then change the |
| 258 | limit, and finally enable monitoring again. */ |
| 259 | outb(0, iobase + PC87427_REG_FAN_STATUS); |
| 260 | data->fan_min[nr] = fan_to_reg(val); |
| 261 | outw(data->fan_min[nr], iobase + PC87427_REG_FAN_MIN); |
| 262 | outb(FAN_STATUS_MONEN, iobase + PC87427_REG_FAN_STATUS); |
| 263 | mutex_unlock(&data->lock); |
| 264 | |
| 265 | return count; |
| 266 | } |
| 267 | |
| 268 | static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0); |
| 269 | static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1); |
| 270 | static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2); |
| 271 | static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3); |
| 272 | static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan_input, NULL, 4); |
| 273 | static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan_input, NULL, 5); |
| 274 | static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan_input, NULL, 6); |
| 275 | static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan_input, NULL, 7); |
| 276 | |
| 277 | static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, |
| 278 | show_fan_min, set_fan_min, 0); |
| 279 | static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, |
| 280 | show_fan_min, set_fan_min, 1); |
| 281 | static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, |
| 282 | show_fan_min, set_fan_min, 2); |
| 283 | static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, |
| 284 | show_fan_min, set_fan_min, 3); |
| 285 | static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, |
| 286 | show_fan_min, set_fan_min, 4); |
| 287 | static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, |
| 288 | show_fan_min, set_fan_min, 5); |
| 289 | static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, |
| 290 | show_fan_min, set_fan_min, 6); |
| 291 | static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, |
| 292 | show_fan_min, set_fan_min, 7); |
| 293 | |
| 294 | static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0); |
| 295 | static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1); |
| 296 | static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2); |
| 297 | static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3); |
| 298 | static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4); |
| 299 | static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5); |
| 300 | static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6); |
| 301 | static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7); |
| 302 | |
| 303 | static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0); |
| 304 | static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1); |
| 305 | static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2); |
| 306 | static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3); |
| 307 | static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4); |
| 308 | static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5); |
| 309 | static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6); |
| 310 | static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7); |
| 311 | |
| 312 | static struct attribute *pc87427_attributes_fan[8][5] = { |
| 313 | { |
| 314 | &sensor_dev_attr_fan1_input.dev_attr.attr, |
| 315 | &sensor_dev_attr_fan1_min.dev_attr.attr, |
| 316 | &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| 317 | &sensor_dev_attr_fan1_fault.dev_attr.attr, |
| 318 | NULL |
| 319 | }, { |
| 320 | &sensor_dev_attr_fan2_input.dev_attr.attr, |
| 321 | &sensor_dev_attr_fan2_min.dev_attr.attr, |
| 322 | &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| 323 | &sensor_dev_attr_fan2_fault.dev_attr.attr, |
| 324 | NULL |
| 325 | }, { |
| 326 | &sensor_dev_attr_fan3_input.dev_attr.attr, |
| 327 | &sensor_dev_attr_fan3_min.dev_attr.attr, |
| 328 | &sensor_dev_attr_fan3_alarm.dev_attr.attr, |
| 329 | &sensor_dev_attr_fan3_fault.dev_attr.attr, |
| 330 | NULL |
| 331 | }, { |
| 332 | &sensor_dev_attr_fan4_input.dev_attr.attr, |
| 333 | &sensor_dev_attr_fan4_min.dev_attr.attr, |
| 334 | &sensor_dev_attr_fan4_alarm.dev_attr.attr, |
| 335 | &sensor_dev_attr_fan4_fault.dev_attr.attr, |
| 336 | NULL |
| 337 | }, { |
| 338 | &sensor_dev_attr_fan5_input.dev_attr.attr, |
| 339 | &sensor_dev_attr_fan5_min.dev_attr.attr, |
| 340 | &sensor_dev_attr_fan5_alarm.dev_attr.attr, |
| 341 | &sensor_dev_attr_fan5_fault.dev_attr.attr, |
| 342 | NULL |
| 343 | }, { |
| 344 | &sensor_dev_attr_fan6_input.dev_attr.attr, |
| 345 | &sensor_dev_attr_fan6_min.dev_attr.attr, |
| 346 | &sensor_dev_attr_fan6_alarm.dev_attr.attr, |
| 347 | &sensor_dev_attr_fan6_fault.dev_attr.attr, |
| 348 | NULL |
| 349 | }, { |
| 350 | &sensor_dev_attr_fan7_input.dev_attr.attr, |
| 351 | &sensor_dev_attr_fan7_min.dev_attr.attr, |
| 352 | &sensor_dev_attr_fan7_alarm.dev_attr.attr, |
| 353 | &sensor_dev_attr_fan7_fault.dev_attr.attr, |
| 354 | NULL |
| 355 | }, { |
| 356 | &sensor_dev_attr_fan8_input.dev_attr.attr, |
| 357 | &sensor_dev_attr_fan8_min.dev_attr.attr, |
| 358 | &sensor_dev_attr_fan8_alarm.dev_attr.attr, |
| 359 | &sensor_dev_attr_fan8_fault.dev_attr.attr, |
| 360 | NULL |
| 361 | } |
| 362 | }; |
| 363 | |
| 364 | static const struct attribute_group pc87427_group_fan[8] = { |
| 365 | { .attrs = pc87427_attributes_fan[0] }, |
| 366 | { .attrs = pc87427_attributes_fan[1] }, |
| 367 | { .attrs = pc87427_attributes_fan[2] }, |
| 368 | { .attrs = pc87427_attributes_fan[3] }, |
| 369 | { .attrs = pc87427_attributes_fan[4] }, |
| 370 | { .attrs = pc87427_attributes_fan[5] }, |
| 371 | { .attrs = pc87427_attributes_fan[6] }, |
| 372 | { .attrs = pc87427_attributes_fan[7] }, |
| 373 | }; |
| 374 | |
| 375 | static ssize_t show_name(struct device *dev, struct device_attribute |
| 376 | *devattr, char *buf) |
| 377 | { |
| 378 | struct pc87427_data *data = dev_get_drvdata(dev); |
| 379 | |
| 380 | return sprintf(buf, "%s\n", data->name); |
| 381 | } |
| 382 | static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); |
| 383 | |
| 384 | |
| 385 | /* |
| 386 | * Device detection, attach and detach |
| 387 | */ |
| 388 | |
| 389 | static void __devinit pc87427_init_device(struct device *dev) |
| 390 | { |
| 391 | struct pc87427_data *data = dev_get_drvdata(dev); |
| 392 | int i; |
| 393 | u8 reg; |
| 394 | |
| 395 | /* The FMC module should be ready */ |
| 396 | reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK); |
| 397 | if (!(reg & 0x80)) |
| 398 | dev_warn(dev, "FMC module not ready!\n"); |
| 399 | |
| 400 | /* Check which fans are enabled */ |
| 401 | for (i = 0; i < 8; i++) { |
| 402 | reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i), |
| 403 | PC87427_REG_FAN_STATUS); |
| 404 | if (reg & FAN_STATUS_MONEN) |
| 405 | data->fan_enabled |= (1 << i); |
| 406 | } |
| 407 | |
| 408 | if (!data->fan_enabled) { |
| 409 | dev_dbg(dev, "Enabling all fan inputs\n"); |
| 410 | for (i = 0; i < 8; i++) |
| 411 | pc87427_write8_bank(data, LD_FAN, BANK_FM(i), |
| 412 | PC87427_REG_FAN_STATUS, |
| 413 | FAN_STATUS_MONEN); |
| 414 | data->fan_enabled = 0xff; |
| 415 | } |
| 416 | } |
| 417 | |
| 418 | static int __devinit pc87427_probe(struct platform_device *pdev) |
| 419 | { |
| 420 | struct pc87427_data *data; |
| 421 | struct resource *res; |
| 422 | int i, err; |
| 423 | |
| 424 | if (!(data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL))) { |
| 425 | err = -ENOMEM; |
| 426 | printk(KERN_ERR DRVNAME ": Out of memory\n"); |
| 427 | goto exit; |
| 428 | } |
| 429 | |
| 430 | /* This will need to be revisited when we add support for |
| 431 | temperature and voltage monitoring. */ |
| 432 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
Jean Delvare | ce7ee4e | 2007-05-08 17:21:59 +0200 | [diff] [blame^] | 433 | if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) { |
| 434 | err = -EBUSY; |
| 435 | dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n", |
| 436 | (unsigned long)res->start, (unsigned long)res->end); |
| 437 | goto exit_kfree; |
| 438 | } |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 439 | data->address[0] = res->start; |
| 440 | |
| 441 | mutex_init(&data->lock); |
| 442 | data->name = "pc87427"; |
| 443 | platform_set_drvdata(pdev, data); |
| 444 | pc87427_init_device(&pdev->dev); |
| 445 | |
| 446 | /* Register sysfs hooks */ |
| 447 | if ((err = device_create_file(&pdev->dev, &dev_attr_name))) |
Jean Delvare | ce7ee4e | 2007-05-08 17:21:59 +0200 | [diff] [blame^] | 448 | goto exit_release_region; |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 449 | for (i = 0; i < 8; i++) { |
| 450 | if (!(data->fan_enabled & (1 << i))) |
| 451 | continue; |
| 452 | if ((err = sysfs_create_group(&pdev->dev.kobj, |
| 453 | &pc87427_group_fan[i]))) |
| 454 | goto exit_remove_files; |
| 455 | } |
| 456 | |
| 457 | data->class_dev = hwmon_device_register(&pdev->dev); |
| 458 | if (IS_ERR(data->class_dev)) { |
| 459 | err = PTR_ERR(data->class_dev); |
| 460 | dev_err(&pdev->dev, "Class registration failed (%d)\n", err); |
| 461 | goto exit_remove_files; |
| 462 | } |
| 463 | |
| 464 | return 0; |
| 465 | |
| 466 | exit_remove_files: |
| 467 | for (i = 0; i < 8; i++) { |
| 468 | if (!(data->fan_enabled & (1 << i))) |
| 469 | continue; |
| 470 | sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]); |
| 471 | } |
Jean Delvare | ce7ee4e | 2007-05-08 17:21:59 +0200 | [diff] [blame^] | 472 | exit_release_region: |
| 473 | release_region(res->start, res->end - res->start + 1); |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 474 | exit_kfree: |
| 475 | platform_set_drvdata(pdev, NULL); |
| 476 | kfree(data); |
| 477 | exit: |
| 478 | return err; |
| 479 | } |
| 480 | |
| 481 | static int __devexit pc87427_remove(struct platform_device *pdev) |
| 482 | { |
| 483 | struct pc87427_data *data = platform_get_drvdata(pdev); |
Jean Delvare | ce7ee4e | 2007-05-08 17:21:59 +0200 | [diff] [blame^] | 484 | struct resource *res; |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 485 | int i; |
| 486 | |
| 487 | platform_set_drvdata(pdev, NULL); |
| 488 | hwmon_device_unregister(data->class_dev); |
| 489 | device_remove_file(&pdev->dev, &dev_attr_name); |
| 490 | for (i = 0; i < 8; i++) { |
| 491 | if (!(data->fan_enabled & (1 << i))) |
| 492 | continue; |
| 493 | sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]); |
| 494 | } |
| 495 | kfree(data); |
| 496 | |
Jean Delvare | ce7ee4e | 2007-05-08 17:21:59 +0200 | [diff] [blame^] | 497 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| 498 | release_region(res->start, res->end - res->start + 1); |
| 499 | |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 500 | return 0; |
| 501 | } |
| 502 | |
| 503 | |
| 504 | static struct platform_driver pc87427_driver = { |
| 505 | .driver = { |
| 506 | .owner = THIS_MODULE, |
| 507 | .name = DRVNAME, |
| 508 | }, |
| 509 | .probe = pc87427_probe, |
| 510 | .remove = __devexit_p(pc87427_remove), |
| 511 | }; |
| 512 | |
| 513 | static int __init pc87427_device_add(unsigned short address) |
| 514 | { |
| 515 | struct resource res = { |
| 516 | .start = address, |
| 517 | .end = address + REGION_LENGTH - 1, |
| 518 | .name = logdev_str[0], |
| 519 | .flags = IORESOURCE_IO, |
| 520 | }; |
| 521 | int err; |
| 522 | |
| 523 | pdev = platform_device_alloc(DRVNAME, address); |
| 524 | if (!pdev) { |
| 525 | err = -ENOMEM; |
| 526 | printk(KERN_ERR DRVNAME ": Device allocation failed\n"); |
| 527 | goto exit; |
| 528 | } |
| 529 | |
| 530 | err = platform_device_add_resources(pdev, &res, 1); |
| 531 | if (err) { |
| 532 | printk(KERN_ERR DRVNAME ": Device resource addition failed " |
| 533 | "(%d)\n", err); |
| 534 | goto exit_device_put; |
| 535 | } |
| 536 | |
| 537 | err = platform_device_add(pdev); |
| 538 | if (err) { |
| 539 | printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", |
| 540 | err); |
| 541 | goto exit_device_put; |
| 542 | } |
| 543 | |
| 544 | return 0; |
| 545 | |
| 546 | exit_device_put: |
| 547 | platform_device_put(pdev); |
| 548 | exit: |
| 549 | return err; |
| 550 | } |
| 551 | |
| 552 | static int __init pc87427_find(int sioaddr, unsigned short *address) |
| 553 | { |
| 554 | u16 val; |
| 555 | int i, err = 0; |
| 556 | |
| 557 | /* Identify device */ |
| 558 | val = superio_inb(sioaddr, SIOREG_DEVID); |
| 559 | if (val != 0xf2) { /* PC87427 */ |
| 560 | err = -ENODEV; |
| 561 | goto exit; |
| 562 | } |
| 563 | |
| 564 | for (i = 0; i < 2; i++) { |
| 565 | address[i] = 0; |
| 566 | /* Select logical device */ |
| 567 | superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]); |
| 568 | |
| 569 | val = superio_inb(sioaddr, SIOREG_ACT); |
| 570 | if (!(val & 0x01)) { |
| 571 | printk(KERN_INFO DRVNAME ": Logical device 0x%02x " |
| 572 | "not activated\n", logdev[i]); |
| 573 | continue; |
| 574 | } |
| 575 | |
| 576 | val = superio_inb(sioaddr, SIOREG_MAP); |
| 577 | if (val & 0x01) { |
| 578 | printk(KERN_WARNING DRVNAME ": Logical device 0x%02x " |
| 579 | "is memory-mapped, can't use\n", logdev[i]); |
| 580 | continue; |
| 581 | } |
| 582 | |
| 583 | val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8) |
| 584 | | superio_inb(sioaddr, SIOREG_IOBASE + 1); |
| 585 | if (!val) { |
| 586 | printk(KERN_INFO DRVNAME ": I/O base address not set " |
| 587 | "for logical device 0x%02x\n", logdev[i]); |
| 588 | continue; |
| 589 | } |
| 590 | address[i] = val; |
| 591 | } |
| 592 | |
| 593 | exit: |
| 594 | superio_exit(sioaddr); |
| 595 | return err; |
| 596 | } |
| 597 | |
| 598 | static int __init pc87427_init(void) |
| 599 | { |
| 600 | int err; |
| 601 | unsigned short address[2]; |
| 602 | |
| 603 | if (pc87427_find(0x2e, address) |
| 604 | && pc87427_find(0x4e, address)) |
| 605 | return -ENODEV; |
| 606 | |
| 607 | /* For now the driver only handles fans so we only care about the |
| 608 | first address. */ |
| 609 | if (!address[0]) |
| 610 | return -ENODEV; |
| 611 | |
| 612 | err = platform_driver_register(&pc87427_driver); |
| 613 | if (err) |
| 614 | goto exit; |
| 615 | |
| 616 | /* Sets global pdev as a side effect */ |
| 617 | err = pc87427_device_add(address[0]); |
| 618 | if (err) |
| 619 | goto exit_driver; |
| 620 | |
| 621 | return 0; |
| 622 | |
| 623 | exit_driver: |
| 624 | platform_driver_unregister(&pc87427_driver); |
| 625 | exit: |
| 626 | return err; |
| 627 | } |
| 628 | |
| 629 | static void __exit pc87427_exit(void) |
| 630 | { |
| 631 | platform_device_unregister(pdev); |
| 632 | platform_driver_unregister(&pc87427_driver); |
| 633 | } |
| 634 | |
| 635 | MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); |
| 636 | MODULE_DESCRIPTION("PC87427 hardware monitoring driver"); |
| 637 | MODULE_LICENSE("GPL"); |
| 638 | |
| 639 | module_init(pc87427_init); |
| 640 | module_exit(pc87427_exit); |