blob: fe5b165b88ccb9bc2751da248fc513cc093423b7 [file] [log] [blame]
Luotao Fu33731692009-08-06 11:19:39 +02001/*
2 * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
3 * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
17 * MA 02110-1301, USA.
18 */
19
20#include <linux/platform_device.h>
21#include <linux/io.h>
22#include <linux/i2c.h>
23#include <linux/i2c/at24.h>
24#include <linux/dma-mapping.h>
25#include <linux/spi/spi.h>
26#include <linux/spi/eeprom.h>
27#include <linux/irq.h>
28#include <linux/gpio.h>
29
30#include <asm/mach/arch.h>
31#include <asm/mach-types.h>
32#include <mach/common.h>
33#include <mach/hardware.h>
34#include <mach/iomux.h>
35#include <mach/i2c.h>
36#include <asm/mach/time.h>
37#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
38#include <mach/spi.h>
39#endif
40#include <mach/imx-uart.h>
41#include <mach/mxc_nand.h>
42#include <mach/irqs.h>
43#include <mach/mmc.h>
44
45#include "devices.h"
46
47static int pca100_pins[] = {
48 /* UART1 */
49 PE12_PF_UART1_TXD,
50 PE13_PF_UART1_RXD,
51 PE14_PF_UART1_CTS,
52 PE15_PF_UART1_RTS,
53 /* SDHC */
54 PB4_PF_SD2_D0,
55 PB5_PF_SD2_D1,
56 PB6_PF_SD2_D2,
57 PB7_PF_SD2_D3,
58 PB8_PF_SD2_CMD,
59 PB9_PF_SD2_CLK,
60 /* FEC */
61 PD0_AIN_FEC_TXD0,
62 PD1_AIN_FEC_TXD1,
63 PD2_AIN_FEC_TXD2,
64 PD3_AIN_FEC_TXD3,
65 PD4_AOUT_FEC_RX_ER,
66 PD5_AOUT_FEC_RXD1,
67 PD6_AOUT_FEC_RXD2,
68 PD7_AOUT_FEC_RXD3,
69 PD8_AF_FEC_MDIO,
70 PD9_AIN_FEC_MDC,
71 PD10_AOUT_FEC_CRS,
72 PD11_AOUT_FEC_TX_CLK,
73 PD12_AOUT_FEC_RXD0,
74 PD13_AOUT_FEC_RX_DV,
75 PD14_AOUT_FEC_RX_CLK,
76 PD15_AOUT_FEC_COL,
77 PD16_AIN_FEC_TX_ER,
78 PF23_AIN_FEC_TX_EN,
79 /* SSI1 */
80 PC20_PF_SSI1_FS,
81 PC21_PF_SSI1_RXD,
82 PC22_PF_SSI1_TXD,
83 PC23_PF_SSI1_CLK,
84 /* onboard I2C */
85 PC5_PF_I2C2_SDA,
86 PC6_PF_I2C2_SCL,
87 /* external I2C */
88 PD17_PF_I2C_DATA,
89 PD18_PF_I2C_CLK,
90 /* SPI1 */
91 PD25_PF_CSPI1_RDY,
92 PD29_PF_CSPI1_SCLK,
93 PD30_PF_CSPI1_MISO,
94 PD31_PF_CSPI1_MOSI,
95};
96
97static struct imxuart_platform_data uart_pdata = {
98 .flags = IMXUART_HAVE_RTSCTS,
99};
100
101static struct mxc_nand_platform_data pca100_nand_board_info = {
102 .width = 1,
103 .hw_ecc = 1,
104};
105
106static struct platform_device *platform_devices[] __initdata = {
107 &mxc_w1_master_device,
108 &mxc_fec_device,
109};
110
111static struct imxi2c_platform_data pca100_i2c_1_data = {
112 .bitrate = 100000,
113};
114
115static struct at24_platform_data board_eeprom = {
116 .byte_len = 4096,
117 .page_size = 32,
118 .flags = AT24_FLAG_ADDR16,
119};
120
121static struct i2c_board_info pca100_i2c_devices[] = {
122 {
123 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
124 .platform_data = &board_eeprom,
125 }, {
126 I2C_BOARD_INFO("rtc-pcf8563", 0x51),
127 .type = "pcf8563"
128 }, {
129 I2C_BOARD_INFO("lm75", 0x4a),
130 .type = "lm75"
131 }
132};
133
134#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
135static struct spi_eeprom at25320 = {
136 .name = "at25320an",
137 .byte_len = 4096,
138 .page_size = 32,
139 .flags = EE_ADDR2,
140};
141
142static struct spi_board_info pca100_spi_board_info[] __initdata = {
143 {
144 .modalias = "at25",
145 .max_speed_hz = 30000,
146 .bus_num = 0,
147 .chip_select = 1,
148 .platform_data = &at25320,
149 },
150};
151
152static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
153
154static struct spi_imx_master pca100_spi_0_data = {
155 .chipselect = pca100_spi_cs,
156 .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
157};
158#endif
159
160static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
161 void *data)
162{
163 int ret;
164
165 ret = request_irq(IRQ_GPIOC(29), detect_irq,
166 IRQF_DISABLED | IRQF_TRIGGER_FALLING,
167 "imx-mmc-detect", data);
168 if (ret)
169 printk(KERN_ERR
170 "pca100: Failed to reuest irq for sd/mmc detection\n");
171
172 return ret;
173}
174
175static void pca100_sdhc2_exit(struct device *dev, void *data)
176{
177 free_irq(IRQ_GPIOC(29), data);
178}
179
180static struct imxmmc_platform_data sdhc_pdata = {
181 .init = pca100_sdhc2_init,
182 .exit = pca100_sdhc2_exit,
183};
184
185static void __init pca100_init(void)
186{
187 int ret;
188
189 ret = mxc_gpio_setup_multiple_pins(pca100_pins,
190 ARRAY_SIZE(pca100_pins), "PCA100");
191 if (ret)
192 printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
193
194 mxc_register_device(&mxc_uart_device0, &uart_pdata);
195
196 mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
197 mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
198
199 mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
200
201 /* only the i2c master 1 is used on this CPU card */
202 i2c_register_board_info(1, pca100_i2c_devices,
203 ARRAY_SIZE(pca100_i2c_devices));
204
205 mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
206
207 mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
208 mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
209
210 /* GPIO0_IRQ */
211 mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
212 /* GPIO1_IRQ */
213 mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
214 /* GPIO2_IRQ */
215 mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
216
217#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
218 spi_register_board_info(pca100_spi_board_info,
219 ARRAY_SIZE(pca100_spi_board_info));
220 mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
221#endif
222
223 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
224}
225
226static void __init pca100_timer_init(void)
227{
228 mx27_clocks_init(26000000);
229}
230
231static struct sys_timer pca100_timer = {
232 .init = pca100_timer_init,
233};
234
235MACHINE_START(PCA100, "phyCARD-i.MX27")
236 .phys_io = AIPI_BASE_ADDR,
237 .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
238 .boot_params = PHYS_OFFSET + 0x100,
239 .map_io = mx27_map_io,
240 .init_irq = mxc_init_irq,
241 .init_machine = pca100_init,
242 .timer = &pca100_timer,
243MACHINE_END
244