Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* Driver for USB Mass Storage compliant devices |
| 2 | * |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3 | * Current development and maintenance by: |
| 4 | * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) |
| 5 | * |
| 6 | * Developed with the assistance of: |
| 7 | * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) |
| 8 | * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) |
| 9 | * (c) 2002 Alan Stern <stern@rowland.org> |
| 10 | * |
| 11 | * Initial work by: |
| 12 | * (c) 1999 Michael Gee (michael@linuxspecific.com) |
| 13 | * |
| 14 | * This driver is based on the 'USB Mass Storage Class' document. This |
| 15 | * describes in detail the protocol used to communicate with such |
| 16 | * devices. Clearly, the designers had SCSI and ATAPI commands in |
| 17 | * mind when they created this document. The commands are all very |
| 18 | * similar to commands in the SCSI-II and ATAPI specifications. |
| 19 | * |
| 20 | * It is important to note that in a number of cases this class |
| 21 | * exhibits class-specific exemptions from the USB specification. |
| 22 | * Notably the usage of NAK, STALL and ACK differs from the norm, in |
| 23 | * that they are used to communicate wait, failed and OK on commands. |
| 24 | * |
| 25 | * Also, for certain devices, the interrupt endpoint is used to convey |
| 26 | * status of a command. |
| 27 | * |
| 28 | * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more |
| 29 | * information about this driver. |
| 30 | * |
| 31 | * This program is free software; you can redistribute it and/or modify it |
| 32 | * under the terms of the GNU General Public License as published by the |
| 33 | * Free Software Foundation; either version 2, or (at your option) any |
| 34 | * later version. |
| 35 | * |
| 36 | * This program is distributed in the hope that it will be useful, but |
| 37 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 38 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 39 | * General Public License for more details. |
| 40 | * |
| 41 | * You should have received a copy of the GNU General Public License along |
| 42 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 43 | * 675 Mass Ave, Cambridge, MA 02139, USA. |
| 44 | */ |
| 45 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 46 | #include <linux/sched.h> |
| 47 | #include <linux/errno.h> |
| 48 | #include <linux/slab.h> |
| 49 | |
| 50 | #include <scsi/scsi.h> |
Boaz Harrosh | dff6de7 | 2007-09-10 22:36:31 +0300 | [diff] [blame] | 51 | #include <scsi/scsi_eh.h> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 52 | #include <scsi/scsi_device.h> |
| 53 | |
| 54 | #include "usb.h" |
| 55 | #include "transport.h" |
| 56 | #include "protocol.h" |
| 57 | #include "scsiglue.h" |
| 58 | #include "debug.h" |
| 59 | |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 60 | #include <linux/blkdev.h> |
| 61 | #include "../../scsi/sd.h" |
| 62 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 63 | |
| 64 | /*********************************************************************** |
| 65 | * Data transfer routines |
| 66 | ***********************************************************************/ |
| 67 | |
| 68 | /* |
| 69 | * This is subtle, so pay attention: |
| 70 | * --------------------------------- |
| 71 | * We're very concerned about races with a command abort. Hanging this code |
| 72 | * is a sure fire way to hang the kernel. (Note that this discussion applies |
| 73 | * only to transactions resulting from a scsi queued-command, since only |
| 74 | * these transactions are subject to a scsi abort. Other transactions, such |
| 75 | * as those occurring during device-specific initialization, must be handled |
| 76 | * by a separate code path.) |
| 77 | * |
| 78 | * The abort function (usb_storage_command_abort() in scsiglue.c) first |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 79 | * sets the machine state and the ABORTING bit in us->dflags to prevent |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 80 | * new URBs from being submitted. It then calls usb_stor_stop_transport() |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 81 | * below, which atomically tests-and-clears the URB_ACTIVE bit in us->dflags |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 82 | * to see if the current_urb needs to be stopped. Likewise, the SG_ACTIVE |
| 83 | * bit is tested to see if the current_sg scatter-gather request needs to be |
| 84 | * stopped. The timeout callback routine does much the same thing. |
| 85 | * |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 86 | * When a disconnect occurs, the DISCONNECTING bit in us->dflags is set to |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 87 | * prevent new URBs from being submitted, and usb_stor_stop_transport() is |
| 88 | * called to stop any ongoing requests. |
| 89 | * |
| 90 | * The submit function first verifies that the submitting is allowed |
| 91 | * (neither ABORTING nor DISCONNECTING bits are set) and that the submit |
| 92 | * completes without errors, and only then sets the URB_ACTIVE bit. This |
| 93 | * prevents the stop_transport() function from trying to cancel the URB |
| 94 | * while the submit call is underway. Next, the submit function must test |
| 95 | * the flags to see if an abort or disconnect occurred during the submission |
| 96 | * or before the URB_ACTIVE bit was set. If so, it's essential to cancel |
| 97 | * the URB if it hasn't been cancelled already (i.e., if the URB_ACTIVE bit |
| 98 | * is still set). Either way, the function must then wait for the URB to |
Alan Stern | b375a04 | 2005-07-29 16:11:07 -0400 | [diff] [blame] | 99 | * finish. Note that the URB can still be in progress even after a call to |
| 100 | * usb_unlink_urb() returns. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 101 | * |
| 102 | * The idea is that (1) once the ABORTING or DISCONNECTING bit is set, |
| 103 | * either the stop_transport() function or the submitting function |
| 104 | * is guaranteed to call usb_unlink_urb() for an active URB, |
| 105 | * and (2) test_and_clear_bit() prevents usb_unlink_urb() from being |
| 106 | * called more than once or from being called during usb_submit_urb(). |
| 107 | */ |
| 108 | |
| 109 | /* This is the completion handler which will wake us up when an URB |
| 110 | * completes. |
| 111 | */ |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 112 | static void usb_stor_blocking_completion(struct urb *urb) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 113 | { |
Ming Lei | cdc9779 | 2008-02-24 18:41:47 +0800 | [diff] [blame] | 114 | struct completion *urb_done_ptr = urb->context; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 115 | |
| 116 | complete(urb_done_ptr); |
| 117 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 118 | |
| 119 | /* This is the common part of the URB message submission code |
| 120 | * |
| 121 | * All URBs from the usb-storage driver involved in handling a queued scsi |
| 122 | * command _must_ pass through this function (or something like it) for the |
| 123 | * abort mechanisms to work properly. |
| 124 | */ |
| 125 | static int usb_stor_msg_common(struct us_data *us, int timeout) |
| 126 | { |
| 127 | struct completion urb_done; |
Franck Bui-Huu | 3428cc4 | 2006-05-24 16:57:28 +0200 | [diff] [blame] | 128 | long timeleft; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 129 | int status; |
| 130 | |
Alan Stern | 543f781 | 2008-05-08 11:55:59 -0400 | [diff] [blame] | 131 | /* don't submit URBs during abort processing */ |
| 132 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 133 | return -EIO; |
| 134 | |
| 135 | /* set up data structures for the wakeup system */ |
| 136 | init_completion(&urb_done); |
| 137 | |
| 138 | /* fill the common fields in the URB */ |
| 139 | us->current_urb->context = &urb_done; |
| 140 | us->current_urb->actual_length = 0; |
| 141 | us->current_urb->error_count = 0; |
| 142 | us->current_urb->status = 0; |
| 143 | |
| 144 | /* we assume that if transfer_buffer isn't us->iobuf then it |
| 145 | * hasn't been mapped for DMA. Yes, this is clunky, but it's |
| 146 | * easier than always having the caller tell us whether the |
| 147 | * transfer buffer has already been mapped. */ |
Alan Stern | b375a04 | 2005-07-29 16:11:07 -0400 | [diff] [blame] | 148 | us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 149 | if (us->current_urb->transfer_buffer == us->iobuf) |
| 150 | us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 151 | us->current_urb->transfer_dma = us->iobuf_dma; |
| 152 | us->current_urb->setup_dma = us->cr_dma; |
| 153 | |
| 154 | /* submit the URB */ |
| 155 | status = usb_submit_urb(us->current_urb, GFP_NOIO); |
| 156 | if (status) { |
| 157 | /* something went wrong */ |
| 158 | return status; |
| 159 | } |
| 160 | |
| 161 | /* since the URB has been submitted successfully, it's now okay |
| 162 | * to cancel it */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 163 | set_bit(US_FLIDX_URB_ACTIVE, &us->dflags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 164 | |
Alan Stern | 543f781 | 2008-05-08 11:55:59 -0400 | [diff] [blame] | 165 | /* did an abort occur during the submission? */ |
| 166 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 167 | |
| 168 | /* cancel the URB, if it hasn't been cancelled already */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 169 | if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 170 | US_DEBUGP("-- cancelling URB\n"); |
| 171 | usb_unlink_urb(us->current_urb); |
| 172 | } |
| 173 | } |
| 174 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 175 | /* wait for the completion of the URB */ |
Franck Bui-Huu | 3428cc4 | 2006-05-24 16:57:28 +0200 | [diff] [blame] | 176 | timeleft = wait_for_completion_interruptible_timeout( |
| 177 | &urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 178 | |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 179 | clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags); |
Franck Bui-Huu | 3428cc4 | 2006-05-24 16:57:28 +0200 | [diff] [blame] | 180 | |
| 181 | if (timeleft <= 0) { |
| 182 | US_DEBUGP("%s -- cancelling URB\n", |
| 183 | timeleft == 0 ? "Timeout" : "Signal"); |
Alan Stern | d6b7d3b | 2006-07-10 04:44:47 -0700 | [diff] [blame] | 184 | usb_kill_urb(us->current_urb); |
Franck Bui-Huu | 3428cc4 | 2006-05-24 16:57:28 +0200 | [diff] [blame] | 185 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 186 | |
| 187 | /* return the URB status */ |
| 188 | return us->current_urb->status; |
| 189 | } |
| 190 | |
| 191 | /* |
| 192 | * Transfer one control message, with timeouts, and allowing early |
| 193 | * termination. Return codes are usual -Exxx, *not* USB_STOR_XFER_xxx. |
| 194 | */ |
| 195 | int usb_stor_control_msg(struct us_data *us, unsigned int pipe, |
| 196 | u8 request, u8 requesttype, u16 value, u16 index, |
| 197 | void *data, u16 size, int timeout) |
| 198 | { |
| 199 | int status; |
| 200 | |
| 201 | US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 202 | __func__, request, requesttype, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 203 | value, index, size); |
| 204 | |
| 205 | /* fill in the devrequest structure */ |
| 206 | us->cr->bRequestType = requesttype; |
| 207 | us->cr->bRequest = request; |
| 208 | us->cr->wValue = cpu_to_le16(value); |
| 209 | us->cr->wIndex = cpu_to_le16(index); |
| 210 | us->cr->wLength = cpu_to_le16(size); |
| 211 | |
| 212 | /* fill and submit the URB */ |
| 213 | usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, |
| 214 | (unsigned char*) us->cr, data, size, |
| 215 | usb_stor_blocking_completion, NULL); |
| 216 | status = usb_stor_msg_common(us, timeout); |
| 217 | |
| 218 | /* return the actual length of the data transferred if no error */ |
| 219 | if (status == 0) |
| 220 | status = us->current_urb->actual_length; |
| 221 | return status; |
| 222 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 223 | EXPORT_SYMBOL_GPL(usb_stor_control_msg); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 224 | |
| 225 | /* This is a version of usb_clear_halt() that allows early termination and |
| 226 | * doesn't read the status from the device -- this is because some devices |
| 227 | * crash their internal firmware when the status is requested after a halt. |
| 228 | * |
| 229 | * A definitive list of these 'bad' devices is too difficult to maintain or |
| 230 | * make complete enough to be useful. This problem was first observed on the |
| 231 | * Hagiwara FlashGate DUAL unit. However, bus traces reveal that neither |
| 232 | * MacOS nor Windows checks the status after clearing a halt. |
| 233 | * |
| 234 | * Since many vendors in this space limit their testing to interoperability |
| 235 | * with these two OSes, specification violations like this one are common. |
| 236 | */ |
| 237 | int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) |
| 238 | { |
| 239 | int result; |
| 240 | int endp = usb_pipeendpoint(pipe); |
| 241 | |
| 242 | if (usb_pipein (pipe)) |
| 243 | endp |= USB_DIR_IN; |
| 244 | |
| 245 | result = usb_stor_control_msg(us, us->send_ctrl_pipe, |
| 246 | USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, |
| 247 | USB_ENDPOINT_HALT, endp, |
| 248 | NULL, 0, 3*HZ); |
| 249 | |
Matthew Dharm | 5203ad4 | 2005-06-06 17:19:29 -0700 | [diff] [blame] | 250 | if (result >= 0) |
David Vrabel | 3444b26 | 2009-04-08 17:36:28 +0000 | [diff] [blame] | 251 | usb_reset_endpoint(us->pusb_dev, endp); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 252 | |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 253 | US_DEBUGP("%s: result = %d\n", __func__, result); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 254 | return result; |
| 255 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 256 | EXPORT_SYMBOL_GPL(usb_stor_clear_halt); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 257 | |
| 258 | |
| 259 | /* |
| 260 | * Interpret the results of a URB transfer |
| 261 | * |
| 262 | * This function prints appropriate debugging messages, clears halts on |
| 263 | * non-control endpoints, and translates the status to the corresponding |
| 264 | * USB_STOR_XFER_xxx return code. |
| 265 | */ |
| 266 | static int interpret_urb_result(struct us_data *us, unsigned int pipe, |
| 267 | unsigned int length, int result, unsigned int partial) |
| 268 | { |
| 269 | US_DEBUGP("Status code %d; transferred %u/%u\n", |
| 270 | result, partial, length); |
| 271 | switch (result) { |
| 272 | |
| 273 | /* no error code; did we send all the data? */ |
| 274 | case 0: |
| 275 | if (partial != length) { |
| 276 | US_DEBUGP("-- short transfer\n"); |
| 277 | return USB_STOR_XFER_SHORT; |
| 278 | } |
| 279 | |
| 280 | US_DEBUGP("-- transfer complete\n"); |
| 281 | return USB_STOR_XFER_GOOD; |
| 282 | |
| 283 | /* stalled */ |
| 284 | case -EPIPE: |
| 285 | /* for control endpoints, (used by CB[I]) a stall indicates |
| 286 | * a failed command */ |
| 287 | if (usb_pipecontrol(pipe)) { |
| 288 | US_DEBUGP("-- stall on control pipe\n"); |
| 289 | return USB_STOR_XFER_STALLED; |
| 290 | } |
| 291 | |
| 292 | /* for other sorts of endpoint, clear the stall */ |
| 293 | US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); |
| 294 | if (usb_stor_clear_halt(us, pipe) < 0) |
| 295 | return USB_STOR_XFER_ERROR; |
| 296 | return USB_STOR_XFER_STALLED; |
| 297 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 298 | /* babble - the device tried to send more than we wanted to read */ |
| 299 | case -EOVERFLOW: |
| 300 | US_DEBUGP("-- babble\n"); |
| 301 | return USB_STOR_XFER_LONG; |
| 302 | |
| 303 | /* the transfer was cancelled by abort, disconnect, or timeout */ |
| 304 | case -ECONNRESET: |
| 305 | US_DEBUGP("-- transfer cancelled\n"); |
| 306 | return USB_STOR_XFER_ERROR; |
| 307 | |
| 308 | /* short scatter-gather read transfer */ |
| 309 | case -EREMOTEIO: |
| 310 | US_DEBUGP("-- short read transfer\n"); |
| 311 | return USB_STOR_XFER_SHORT; |
| 312 | |
| 313 | /* abort or disconnect in progress */ |
| 314 | case -EIO: |
| 315 | US_DEBUGP("-- abort or disconnect in progress\n"); |
| 316 | return USB_STOR_XFER_ERROR; |
| 317 | |
| 318 | /* the catch-all error case */ |
| 319 | default: |
| 320 | US_DEBUGP("-- unknown error\n"); |
| 321 | return USB_STOR_XFER_ERROR; |
| 322 | } |
| 323 | } |
| 324 | |
| 325 | /* |
| 326 | * Transfer one control message, without timeouts, but allowing early |
| 327 | * termination. Return codes are USB_STOR_XFER_xxx. |
| 328 | */ |
| 329 | int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, |
| 330 | u8 request, u8 requesttype, u16 value, u16 index, |
| 331 | void *data, u16 size) |
| 332 | { |
| 333 | int result; |
| 334 | |
| 335 | US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 336 | __func__, request, requesttype, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 337 | value, index, size); |
| 338 | |
| 339 | /* fill in the devrequest structure */ |
| 340 | us->cr->bRequestType = requesttype; |
| 341 | us->cr->bRequest = request; |
| 342 | us->cr->wValue = cpu_to_le16(value); |
| 343 | us->cr->wIndex = cpu_to_le16(index); |
| 344 | us->cr->wLength = cpu_to_le16(size); |
| 345 | |
| 346 | /* fill and submit the URB */ |
| 347 | usb_fill_control_urb(us->current_urb, us->pusb_dev, pipe, |
| 348 | (unsigned char*) us->cr, data, size, |
| 349 | usb_stor_blocking_completion, NULL); |
| 350 | result = usb_stor_msg_common(us, 0); |
| 351 | |
| 352 | return interpret_urb_result(us, pipe, size, result, |
| 353 | us->current_urb->actual_length); |
| 354 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 355 | EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 356 | |
| 357 | /* |
| 358 | * Receive one interrupt buffer, without timeouts, but allowing early |
| 359 | * termination. Return codes are USB_STOR_XFER_xxx. |
| 360 | * |
| 361 | * This routine always uses us->recv_intr_pipe as the pipe and |
| 362 | * us->ep_bInterval as the interrupt interval. |
| 363 | */ |
| 364 | static int usb_stor_intr_transfer(struct us_data *us, void *buf, |
| 365 | unsigned int length) |
| 366 | { |
| 367 | int result; |
| 368 | unsigned int pipe = us->recv_intr_pipe; |
| 369 | unsigned int maxp; |
| 370 | |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 371 | US_DEBUGP("%s: xfer %u bytes\n", __func__, length); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 372 | |
| 373 | /* calculate the max packet size */ |
| 374 | maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); |
| 375 | if (maxp > length) |
| 376 | maxp = length; |
| 377 | |
| 378 | /* fill and submit the URB */ |
| 379 | usb_fill_int_urb(us->current_urb, us->pusb_dev, pipe, buf, |
| 380 | maxp, usb_stor_blocking_completion, NULL, |
| 381 | us->ep_bInterval); |
| 382 | result = usb_stor_msg_common(us, 0); |
| 383 | |
| 384 | return interpret_urb_result(us, pipe, length, result, |
| 385 | us->current_urb->actual_length); |
| 386 | } |
| 387 | |
| 388 | /* |
| 389 | * Transfer one buffer via bulk pipe, without timeouts, but allowing early |
| 390 | * termination. Return codes are USB_STOR_XFER_xxx. If the bulk pipe |
| 391 | * stalls during the transfer, the halt is automatically cleared. |
| 392 | */ |
| 393 | int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, |
| 394 | void *buf, unsigned int length, unsigned int *act_len) |
| 395 | { |
| 396 | int result; |
| 397 | |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 398 | US_DEBUGP("%s: xfer %u bytes\n", __func__, length); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 399 | |
| 400 | /* fill and submit the URB */ |
| 401 | usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, |
| 402 | usb_stor_blocking_completion, NULL); |
| 403 | result = usb_stor_msg_common(us, 0); |
| 404 | |
| 405 | /* store the actual length of the data transferred */ |
| 406 | if (act_len) |
| 407 | *act_len = us->current_urb->actual_length; |
| 408 | return interpret_urb_result(us, pipe, length, result, |
| 409 | us->current_urb->actual_length); |
| 410 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 411 | EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 412 | |
| 413 | /* |
| 414 | * Transfer a scatter-gather list via bulk transfer |
| 415 | * |
| 416 | * This function does basically the same thing as usb_stor_bulk_transfer_buf() |
| 417 | * above, but it uses the usbcore scatter-gather library. |
| 418 | */ |
| 419 | static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, |
| 420 | struct scatterlist *sg, int num_sg, unsigned int length, |
| 421 | unsigned int *act_len) |
| 422 | { |
| 423 | int result; |
| 424 | |
Alan Stern | 543f781 | 2008-05-08 11:55:59 -0400 | [diff] [blame] | 425 | /* don't submit s-g requests during abort processing */ |
| 426 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 427 | return USB_STOR_XFER_ERROR; |
| 428 | |
| 429 | /* initialize the scatter-gather request block */ |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 430 | US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 431 | length, num_sg); |
| 432 | result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, |
Christoph Lameter | 55acbda | 2006-12-06 20:33:13 -0800 | [diff] [blame] | 433 | sg, num_sg, length, GFP_NOIO); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 434 | if (result) { |
| 435 | US_DEBUGP("usb_sg_init returned %d\n", result); |
| 436 | return USB_STOR_XFER_ERROR; |
| 437 | } |
| 438 | |
| 439 | /* since the block has been initialized successfully, it's now |
| 440 | * okay to cancel it */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 441 | set_bit(US_FLIDX_SG_ACTIVE, &us->dflags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 442 | |
Alan Stern | 543f781 | 2008-05-08 11:55:59 -0400 | [diff] [blame] | 443 | /* did an abort occur during the submission? */ |
| 444 | if (test_bit(US_FLIDX_ABORTING, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 445 | |
| 446 | /* cancel the request, if it hasn't been cancelled already */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 447 | if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 448 | US_DEBUGP("-- cancelling sg request\n"); |
| 449 | usb_sg_cancel(&us->current_sg); |
| 450 | } |
| 451 | } |
| 452 | |
| 453 | /* wait for the completion of the transfer */ |
| 454 | usb_sg_wait(&us->current_sg); |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 455 | clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 456 | |
| 457 | result = us->current_sg.status; |
| 458 | if (act_len) |
| 459 | *act_len = us->current_sg.bytes; |
| 460 | return interpret_urb_result(us, pipe, length, result, |
| 461 | us->current_sg.bytes); |
| 462 | } |
| 463 | |
| 464 | /* |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 465 | * Common used function. Transfer a complete command |
| 466 | * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid |
| 467 | */ |
| 468 | int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, |
| 469 | struct scsi_cmnd* srb) |
| 470 | { |
| 471 | unsigned int partial; |
| 472 | int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb), |
| 473 | scsi_sg_count(srb), scsi_bufflen(srb), |
| 474 | &partial); |
| 475 | |
| 476 | scsi_set_resid(srb, scsi_bufflen(srb) - partial); |
| 477 | return result; |
| 478 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 479 | EXPORT_SYMBOL_GPL(usb_stor_bulk_srb); |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 480 | |
| 481 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 482 | * Transfer an entire SCSI command's worth of data payload over the bulk |
| 483 | * pipe. |
| 484 | * |
| 485 | * Note that this uses usb_stor_bulk_transfer_buf() and |
| 486 | * usb_stor_bulk_transfer_sglist() to achieve its goals -- |
| 487 | * this function simply determines whether we're going to use |
| 488 | * scatter-gather or not, and acts appropriately. |
| 489 | */ |
| 490 | int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, |
| 491 | void *buf, unsigned int length_left, int use_sg, int *residual) |
| 492 | { |
| 493 | int result; |
| 494 | unsigned int partial; |
| 495 | |
| 496 | /* are we scatter-gathering? */ |
| 497 | if (use_sg) { |
| 498 | /* use the usb core scatter-gather primitives */ |
| 499 | result = usb_stor_bulk_transfer_sglist(us, pipe, |
| 500 | (struct scatterlist *) buf, use_sg, |
| 501 | length_left, &partial); |
| 502 | length_left -= partial; |
| 503 | } else { |
| 504 | /* no scatter-gather, just make the request */ |
| 505 | result = usb_stor_bulk_transfer_buf(us, pipe, buf, |
| 506 | length_left, &partial); |
| 507 | length_left -= partial; |
| 508 | } |
| 509 | |
| 510 | /* store the residual and return the error code */ |
| 511 | if (residual) |
| 512 | *residual = length_left; |
| 513 | return result; |
| 514 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 515 | EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 516 | |
| 517 | /*********************************************************************** |
| 518 | * Transport routines |
| 519 | ***********************************************************************/ |
| 520 | |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 521 | /* There are so many devices that report the capacity incorrectly, |
| 522 | * this routine was written to counteract some of the resulting |
| 523 | * problems. |
| 524 | */ |
| 525 | static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) |
| 526 | { |
| 527 | struct gendisk *disk; |
| 528 | struct scsi_disk *sdkp; |
| 529 | u32 sector; |
| 530 | |
| 531 | /* To Report "Medium Error: Record Not Found */ |
| 532 | static unsigned char record_not_found[18] = { |
| 533 | [0] = 0x70, /* current error */ |
| 534 | [2] = MEDIUM_ERROR, /* = 0x03 */ |
| 535 | [7] = 0x0a, /* additional length */ |
| 536 | [12] = 0x14 /* Record Not Found */ |
| 537 | }; |
| 538 | |
| 539 | /* If last-sector problems can't occur, whether because the |
| 540 | * capacity was already decremented or because the device is |
| 541 | * known to report the correct capacity, then we don't need |
| 542 | * to do anything. |
| 543 | */ |
| 544 | if (!us->use_last_sector_hacks) |
| 545 | return; |
| 546 | |
| 547 | /* Was this command a READ(10) or a WRITE(10)? */ |
| 548 | if (srb->cmnd[0] != READ_10 && srb->cmnd[0] != WRITE_10) |
| 549 | goto done; |
| 550 | |
| 551 | /* Did this command access the last sector? */ |
| 552 | sector = (srb->cmnd[2] << 24) | (srb->cmnd[3] << 16) | |
| 553 | (srb->cmnd[4] << 8) | (srb->cmnd[5]); |
| 554 | disk = srb->request->rq_disk; |
| 555 | if (!disk) |
| 556 | goto done; |
| 557 | sdkp = scsi_disk(disk); |
| 558 | if (!sdkp) |
| 559 | goto done; |
| 560 | if (sector + 1 != sdkp->capacity) |
| 561 | goto done; |
| 562 | |
| 563 | if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { |
| 564 | |
Alan Stern | 0d020aa | 2009-02-02 09:51:01 -0500 | [diff] [blame] | 565 | /* The command succeeded. We know this device doesn't |
| 566 | * have the last-sector bug, so stop checking it. |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 567 | */ |
Alan Stern | 0d020aa | 2009-02-02 09:51:01 -0500 | [diff] [blame] | 568 | us->use_last_sector_hacks = 0; |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 569 | |
| 570 | } else { |
| 571 | /* The command failed. Allow up to 3 retries in case this |
| 572 | * is some normal sort of failure. After that, assume the |
| 573 | * capacity is wrong and we're trying to access the sector |
| 574 | * beyond the end. Replace the result code and sense data |
| 575 | * with values that will cause the SCSI core to fail the |
| 576 | * command immediately, instead of going into an infinite |
| 577 | * (or even just a very long) retry loop. |
| 578 | */ |
| 579 | if (++us->last_sector_retries < 3) |
| 580 | return; |
| 581 | srb->result = SAM_STAT_CHECK_CONDITION; |
| 582 | memcpy(srb->sense_buffer, record_not_found, |
| 583 | sizeof(record_not_found)); |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 584 | } |
| 585 | |
| 586 | done: |
| 587 | /* Don't reset the retry counter for TEST UNIT READY commands, |
| 588 | * because they get issued after device resets which might be |
| 589 | * caused by a failed last-sector access. |
| 590 | */ |
| 591 | if (srb->cmnd[0] != TEST_UNIT_READY) |
| 592 | us->last_sector_retries = 0; |
| 593 | } |
| 594 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 595 | /* Invoke the transport and basic error-handling/recovery methods |
| 596 | * |
| 597 | * This is used by the protocol layers to actually send the message to |
| 598 | * the device and receive the response. |
| 599 | */ |
| 600 | void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) |
| 601 | { |
| 602 | int need_auto_sense; |
| 603 | int result; |
| 604 | |
| 605 | /* send the command to the transport layer */ |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 606 | scsi_set_resid(srb, 0); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 607 | result = us->transport(srb, us); |
| 608 | |
| 609 | /* if the command gets aborted by the higher layers, we need to |
| 610 | * short-circuit all other processing |
| 611 | */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 612 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 613 | US_DEBUGP("-- command was aborted\n"); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 614 | srb->result = DID_ABORT << 16; |
| 615 | goto Handle_Errors; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 616 | } |
| 617 | |
| 618 | /* if there is a transport error, reset and don't auto-sense */ |
| 619 | if (result == USB_STOR_TRANSPORT_ERROR) { |
| 620 | US_DEBUGP("-- transport indicates error, resetting\n"); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 621 | srb->result = DID_ERROR << 16; |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 622 | goto Handle_Errors; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 623 | } |
| 624 | |
| 625 | /* if the transport provided its own sense data, don't auto-sense */ |
| 626 | if (result == USB_STOR_TRANSPORT_NO_SENSE) { |
| 627 | srb->result = SAM_STAT_CHECK_CONDITION; |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 628 | last_sector_hacks(us, srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 629 | return; |
| 630 | } |
| 631 | |
| 632 | srb->result = SAM_STAT_GOOD; |
| 633 | |
| 634 | /* Determine if we need to auto-sense |
| 635 | * |
| 636 | * I normally don't use a flag like this, but it's almost impossible |
| 637 | * to understand what's going on here if I don't. |
| 638 | */ |
| 639 | need_auto_sense = 0; |
| 640 | |
| 641 | /* |
| 642 | * If we're running the CB transport, which is incapable |
| 643 | * of determining status on its own, we will auto-sense |
| 644 | * unless the operation involved a data-in transfer. Devices |
| 645 | * can signal most data-in errors by stalling the bulk-in pipe. |
| 646 | */ |
| 647 | if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) && |
| 648 | srb->sc_data_direction != DMA_FROM_DEVICE) { |
| 649 | US_DEBUGP("-- CB transport device requiring auto-sense\n"); |
| 650 | need_auto_sense = 1; |
| 651 | } |
| 652 | |
| 653 | /* |
| 654 | * If we have a failure, we're going to do a REQUEST_SENSE |
| 655 | * automatically. Note that we differentiate between a command |
| 656 | * "failure" and an "error" in the transport mechanism. |
| 657 | */ |
| 658 | if (result == USB_STOR_TRANSPORT_FAILED) { |
| 659 | US_DEBUGP("-- transport indicates command failure\n"); |
| 660 | need_auto_sense = 1; |
| 661 | } |
| 662 | |
| 663 | /* |
Ben Efros | 1537e0a | 2008-11-18 13:31:13 -0800 | [diff] [blame] | 664 | * Determine if this device is SAT by seeing if the |
| 665 | * command executed successfully. Otherwise we'll have |
| 666 | * to wait for at least one CHECK_CONDITION to determine |
| 667 | * SANE_SENSE support |
| 668 | */ |
| 669 | if ((srb->cmnd[0] == ATA_16 || srb->cmnd[0] == ATA_12) && |
| 670 | result == USB_STOR_TRANSPORT_GOOD && |
| 671 | !(us->fflags & US_FL_SANE_SENSE) && |
| 672 | !(srb->cmnd[2] & 0x20)) { |
| 673 | US_DEBUGP("-- SAT supported, increasing auto-sense\n"); |
| 674 | us->fflags |= US_FL_SANE_SENSE; |
| 675 | } |
| 676 | |
| 677 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 678 | * A short transfer on a command where we don't expect it |
| 679 | * is unusual, but it doesn't mean we need to auto-sense. |
| 680 | */ |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 681 | if ((scsi_get_resid(srb) > 0) && |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 682 | !((srb->cmnd[0] == REQUEST_SENSE) || |
| 683 | (srb->cmnd[0] == INQUIRY) || |
| 684 | (srb->cmnd[0] == MODE_SENSE) || |
| 685 | (srb->cmnd[0] == LOG_SENSE) || |
| 686 | (srb->cmnd[0] == MODE_SENSE_10))) { |
| 687 | US_DEBUGP("-- unexpectedly short transfer\n"); |
| 688 | } |
| 689 | |
| 690 | /* Now, if we need to do the auto-sense, let's do it */ |
| 691 | if (need_auto_sense) { |
| 692 | int temp_result; |
Boaz Harrosh | dff6de7 | 2007-09-10 22:36:31 +0300 | [diff] [blame] | 693 | struct scsi_eh_save ses; |
Ben Efros | 1537e0a | 2008-11-18 13:31:13 -0800 | [diff] [blame] | 694 | int sense_size = US_SENSE_SIZE; |
| 695 | |
| 696 | /* device supports and needs bigger sense buffer */ |
| 697 | if (us->fflags & US_FL_SANE_SENSE) |
| 698 | sense_size = ~0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 699 | |
| 700 | US_DEBUGP("Issuing auto-REQUEST_SENSE\n"); |
| 701 | |
Ben Efros | 1537e0a | 2008-11-18 13:31:13 -0800 | [diff] [blame] | 702 | scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 703 | |
| 704 | /* FIXME: we must do the protocol translation here */ |
matthieu castet | d277064 | 2008-03-19 19:40:52 +0100 | [diff] [blame] | 705 | if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI || |
| 706 | us->subclass == US_SC_CYP_ATACB) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 707 | srb->cmd_len = 6; |
| 708 | else |
| 709 | srb->cmd_len = 12; |
| 710 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 711 | /* issue the auto-sense command */ |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 712 | scsi_set_resid(srb, 0); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 713 | temp_result = us->transport(us->srb, us); |
| 714 | |
| 715 | /* let's clean up right away */ |
Boaz Harrosh | dff6de7 | 2007-09-10 22:36:31 +0300 | [diff] [blame] | 716 | scsi_eh_restore_cmnd(srb, &ses); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 717 | |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 718 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 719 | US_DEBUGP("-- auto-sense aborted\n"); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 720 | srb->result = DID_ABORT << 16; |
| 721 | goto Handle_Errors; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 722 | } |
| 723 | if (temp_result != USB_STOR_TRANSPORT_GOOD) { |
| 724 | US_DEBUGP("-- auto-sense failure\n"); |
| 725 | |
| 726 | /* we skip the reset if this happens to be a |
| 727 | * multi-target device, since failure of an |
| 728 | * auto-sense is perfectly valid |
| 729 | */ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 730 | srb->result = DID_ERROR << 16; |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 731 | if (!(us->fflags & US_FL_SCM_MULT_TARG)) |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 732 | goto Handle_Errors; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 733 | return; |
| 734 | } |
| 735 | |
Ben Efros | 1537e0a | 2008-11-18 13:31:13 -0800 | [diff] [blame] | 736 | /* If the sense data returned is larger than 18-bytes then we |
| 737 | * assume this device supports requesting more in the future. |
| 738 | * The response code must be 70h through 73h inclusive. |
| 739 | */ |
| 740 | if (srb->sense_buffer[7] > (US_SENSE_SIZE - 8) && |
| 741 | !(us->fflags & US_FL_SANE_SENSE) && |
| 742 | (srb->sense_buffer[0] & 0x7C) == 0x70) { |
| 743 | US_DEBUGP("-- SANE_SENSE support enabled\n"); |
| 744 | us->fflags |= US_FL_SANE_SENSE; |
| 745 | |
| 746 | /* Indicate to the user that we truncated their sense |
| 747 | * because we didn't know it supported larger sense. |
| 748 | */ |
| 749 | US_DEBUGP("-- Sense data truncated to %i from %i\n", |
| 750 | US_SENSE_SIZE, |
| 751 | srb->sense_buffer[7] + 8); |
| 752 | srb->sense_buffer[7] = (US_SENSE_SIZE - 8); |
| 753 | } |
| 754 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 755 | US_DEBUGP("-- Result from auto-sense is %d\n", temp_result); |
| 756 | US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", |
| 757 | srb->sense_buffer[0], |
| 758 | srb->sense_buffer[2] & 0xf, |
| 759 | srb->sense_buffer[12], |
| 760 | srb->sense_buffer[13]); |
| 761 | #ifdef CONFIG_USB_STORAGE_DEBUG |
| 762 | usb_stor_show_sense( |
| 763 | srb->sense_buffer[2] & 0xf, |
| 764 | srb->sense_buffer[12], |
| 765 | srb->sense_buffer[13]); |
| 766 | #endif |
| 767 | |
| 768 | /* set the result so the higher layers expect this data */ |
| 769 | srb->result = SAM_STAT_CHECK_CONDITION; |
| 770 | |
| 771 | /* If things are really okay, then let's show that. Zero |
| 772 | * out the sense buffer so the higher layers won't realize |
| 773 | * we did an unsolicited auto-sense. */ |
| 774 | if (result == USB_STOR_TRANSPORT_GOOD && |
| 775 | /* Filemark 0, ignore EOM, ILI 0, no sense */ |
| 776 | (srb->sense_buffer[2] & 0xaf) == 0 && |
| 777 | /* No ASC or ASCQ */ |
| 778 | srb->sense_buffer[12] == 0 && |
| 779 | srb->sense_buffer[13] == 0) { |
| 780 | srb->result = SAM_STAT_GOOD; |
| 781 | srb->sense_buffer[0] = 0x0; |
| 782 | } |
| 783 | } |
| 784 | |
| 785 | /* Did we transfer less than the minimum amount required? */ |
Alan Stern | 8bfa247 | 2008-09-02 10:12:11 -0400 | [diff] [blame] | 786 | if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 787 | scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) |
Martin K. Petersen | 1c9fbaf | 2009-01-04 03:14:11 -0500 | [diff] [blame] | 788 | srb->result = DID_ERROR << 16; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 789 | |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 790 | last_sector_hacks(us, srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 791 | return; |
| 792 | |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 793 | /* Error and abort processing: try to resynchronize with the device |
| 794 | * by issuing a port reset. If that fails, try a class-specific |
| 795 | * device reset. */ |
| 796 | Handle_Errors: |
| 797 | |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 798 | /* Set the RESETTING bit, and clear the ABORTING bit so that |
| 799 | * the reset may proceed. */ |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 800 | scsi_lock(us_to_host(us)); |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 801 | set_bit(US_FLIDX_RESETTING, &us->dflags); |
| 802 | clear_bit(US_FLIDX_ABORTING, &us->dflags); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 803 | scsi_unlock(us_to_host(us)); |
| 804 | |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 805 | /* We must release the device lock because the pre_reset routine |
| 806 | * will want to acquire it. */ |
| 807 | mutex_unlock(&us->dev_mutex); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 808 | result = usb_stor_port_reset(us); |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 809 | mutex_lock(&us->dev_mutex); |
| 810 | |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 811 | if (result < 0) { |
| 812 | scsi_lock(us_to_host(us)); |
| 813 | usb_stor_report_device_reset(us); |
| 814 | scsi_unlock(us_to_host(us)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 815 | us->transport_reset(us); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 816 | } |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 817 | clear_bit(US_FLIDX_RESETTING, &us->dflags); |
Alan Stern | 25ff1c3 | 2008-12-15 12:43:41 -0500 | [diff] [blame] | 818 | last_sector_hacks(us, srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 819 | } |
| 820 | |
| 821 | /* Stop the current URB transfer */ |
| 822 | void usb_stor_stop_transport(struct us_data *us) |
| 823 | { |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 824 | US_DEBUGP("%s called\n", __func__); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 825 | |
| 826 | /* If the state machine is blocked waiting for an URB, |
| 827 | * let's wake it up. The test_and_clear_bit() call |
| 828 | * guarantees that if a URB has just been submitted, |
| 829 | * it won't be cancelled more than once. */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 830 | if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 831 | US_DEBUGP("-- cancelling URB\n"); |
| 832 | usb_unlink_urb(us->current_urb); |
| 833 | } |
| 834 | |
| 835 | /* If we are waiting for a scatter-gather operation, cancel it. */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 836 | if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 837 | US_DEBUGP("-- cancelling sg request\n"); |
| 838 | usb_sg_cancel(&us->current_sg); |
| 839 | } |
| 840 | } |
| 841 | |
| 842 | /* |
Alan Stern | 64648a9 | 2008-11-20 14:20:03 -0500 | [diff] [blame] | 843 | * Control/Bulk and Control/Bulk/Interrupt transport |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 844 | */ |
| 845 | |
Alan Stern | 64648a9 | 2008-11-20 14:20:03 -0500 | [diff] [blame] | 846 | int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 847 | { |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 848 | unsigned int transfer_length = scsi_bufflen(srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 849 | unsigned int pipe = 0; |
| 850 | int result; |
| 851 | |
| 852 | /* COMMAND STAGE */ |
| 853 | /* let's send the command via the control pipe */ |
| 854 | result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, |
| 855 | US_CBI_ADSC, |
| 856 | USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, |
| 857 | us->ifnum, srb->cmnd, srb->cmd_len); |
| 858 | |
| 859 | /* check the return code for the command */ |
| 860 | US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result); |
| 861 | |
| 862 | /* if we stalled the command, it means command failed */ |
| 863 | if (result == USB_STOR_XFER_STALLED) { |
| 864 | return USB_STOR_TRANSPORT_FAILED; |
| 865 | } |
| 866 | |
| 867 | /* Uh oh... serious problem here */ |
| 868 | if (result != USB_STOR_XFER_GOOD) { |
| 869 | return USB_STOR_TRANSPORT_ERROR; |
| 870 | } |
| 871 | |
| 872 | /* DATA STAGE */ |
| 873 | /* transfer the data payload for this command, if one exists*/ |
| 874 | if (transfer_length) { |
| 875 | pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? |
| 876 | us->recv_bulk_pipe : us->send_bulk_pipe; |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 877 | result = usb_stor_bulk_srb(us, pipe, srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 878 | US_DEBUGP("CBI data stage result is 0x%x\n", result); |
| 879 | |
| 880 | /* if we stalled the data transfer it means command failed */ |
| 881 | if (result == USB_STOR_XFER_STALLED) |
| 882 | return USB_STOR_TRANSPORT_FAILED; |
| 883 | if (result > USB_STOR_XFER_STALLED) |
| 884 | return USB_STOR_TRANSPORT_ERROR; |
| 885 | } |
| 886 | |
| 887 | /* STATUS STAGE */ |
Alan Stern | 64648a9 | 2008-11-20 14:20:03 -0500 | [diff] [blame] | 888 | |
| 889 | /* NOTE: CB does not have a status stage. Silly, I know. So |
| 890 | * we have to catch this at a higher level. |
| 891 | */ |
| 892 | if (us->protocol != US_PR_CBI) |
| 893 | return USB_STOR_TRANSPORT_GOOD; |
| 894 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 895 | result = usb_stor_intr_transfer(us, us->iobuf, 2); |
| 896 | US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n", |
| 897 | us->iobuf[0], us->iobuf[1]); |
| 898 | if (result != USB_STOR_XFER_GOOD) |
| 899 | return USB_STOR_TRANSPORT_ERROR; |
| 900 | |
| 901 | /* UFI gives us ASC and ASCQ, like a request sense |
| 902 | * |
| 903 | * REQUEST_SENSE and INQUIRY don't affect the sense data on UFI |
| 904 | * devices, so we ignore the information for those commands. Note |
| 905 | * that this means we could be ignoring a real error on these |
| 906 | * commands, but that can't be helped. |
| 907 | */ |
| 908 | if (us->subclass == US_SC_UFI) { |
| 909 | if (srb->cmnd[0] == REQUEST_SENSE || |
| 910 | srb->cmnd[0] == INQUIRY) |
| 911 | return USB_STOR_TRANSPORT_GOOD; |
| 912 | if (us->iobuf[0]) |
| 913 | goto Failed; |
| 914 | return USB_STOR_TRANSPORT_GOOD; |
| 915 | } |
| 916 | |
| 917 | /* If not UFI, we interpret the data as a result code |
| 918 | * The first byte should always be a 0x0. |
| 919 | * |
| 920 | * Some bogus devices don't follow that rule. They stuff the ASC |
| 921 | * into the first byte -- so if it's non-zero, call it a failure. |
| 922 | */ |
| 923 | if (us->iobuf[0]) { |
| 924 | US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n", |
| 925 | us->iobuf[0]); |
| 926 | goto Failed; |
| 927 | |
| 928 | } |
| 929 | |
| 930 | /* The second byte & 0x0F should be 0x0 for good, otherwise error */ |
| 931 | switch (us->iobuf[1] & 0x0F) { |
| 932 | case 0x00: |
| 933 | return USB_STOR_TRANSPORT_GOOD; |
| 934 | case 0x01: |
| 935 | goto Failed; |
| 936 | } |
| 937 | return USB_STOR_TRANSPORT_ERROR; |
| 938 | |
| 939 | /* the CBI spec requires that the bulk pipe must be cleared |
| 940 | * following any data-in/out command failure (section 2.4.3.1.3) |
| 941 | */ |
| 942 | Failed: |
| 943 | if (pipe) |
| 944 | usb_stor_clear_halt(us, pipe); |
| 945 | return USB_STOR_TRANSPORT_FAILED; |
| 946 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 947 | EXPORT_SYMBOL_GPL(usb_stor_CB_transport); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 948 | |
| 949 | /* |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 950 | * Bulk only transport |
| 951 | */ |
| 952 | |
| 953 | /* Determine what the maximum LUN supported is */ |
| 954 | int usb_stor_Bulk_max_lun(struct us_data *us) |
| 955 | { |
| 956 | int result; |
| 957 | |
| 958 | /* issue the command */ |
Alan Stern | b876aef | 2005-10-23 19:38:56 -0700 | [diff] [blame] | 959 | us->iobuf[0] = 0; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 960 | result = usb_stor_control_msg(us, us->recv_ctrl_pipe, |
| 961 | US_BULK_GET_MAX_LUN, |
| 962 | USB_DIR_IN | USB_TYPE_CLASS | |
| 963 | USB_RECIP_INTERFACE, |
Giacomo Lozito | 7a77791 | 2009-07-13 23:23:33 +0200 | [diff] [blame] | 964 | 0, us->ifnum, us->iobuf, 1, 10*HZ); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 965 | |
| 966 | US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", |
| 967 | result, us->iobuf[0]); |
| 968 | |
| 969 | /* if we have a successful request, return the result */ |
| 970 | if (result > 0) |
| 971 | return us->iobuf[0]; |
| 972 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 973 | /* |
| 974 | * Some devices don't like GetMaxLUN. They may STALL the control |
| 975 | * pipe, they may return a zero-length result, they may do nothing at |
| 976 | * all and timeout, or they may fail in even more bizarrely creative |
| 977 | * ways. In these cases the best approach is to use the default |
| 978 | * value: only one LUN. |
| 979 | */ |
| 980 | return 0; |
| 981 | } |
| 982 | |
| 983 | int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) |
| 984 | { |
| 985 | struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| 986 | struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 987 | unsigned int transfer_length = scsi_bufflen(srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 988 | unsigned int residue; |
| 989 | int result; |
| 990 | int fake_sense = 0; |
| 991 | unsigned int cswlen; |
| 992 | unsigned int cbwlen = US_BULK_CB_WRAP_LEN; |
| 993 | |
| 994 | /* Take care of BULK32 devices; set extra byte to 0 */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 995 | if (unlikely(us->fflags & US_FL_BULK32)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 996 | cbwlen = 32; |
| 997 | us->iobuf[31] = 0; |
| 998 | } |
| 999 | |
| 1000 | /* set up the command wrapper */ |
| 1001 | bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| 1002 | bcb->DataTransferLength = cpu_to_le32(transfer_length); |
| 1003 | bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0; |
Matthew Dharm | 0f64e07 | 2005-07-28 14:43:08 -0700 | [diff] [blame] | 1004 | bcb->Tag = ++us->tag; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1005 | bcb->Lun = srb->device->lun; |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 1006 | if (us->fflags & US_FL_SCM_MULT_TARG) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1007 | bcb->Lun |= srb->device->id << 4; |
| 1008 | bcb->Length = srb->cmd_len; |
| 1009 | |
| 1010 | /* copy the command payload */ |
| 1011 | memset(bcb->CDB, 0, sizeof(bcb->CDB)); |
| 1012 | memcpy(bcb->CDB, srb->cmnd, bcb->Length); |
| 1013 | |
| 1014 | /* send it to out endpoint */ |
| 1015 | US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", |
| 1016 | le32_to_cpu(bcb->Signature), bcb->Tag, |
| 1017 | le32_to_cpu(bcb->DataTransferLength), bcb->Flags, |
| 1018 | (bcb->Lun >> 4), (bcb->Lun & 0x0F), |
| 1019 | bcb->Length); |
| 1020 | result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| 1021 | bcb, cbwlen, NULL); |
| 1022 | US_DEBUGP("Bulk command transfer result=%d\n", result); |
| 1023 | if (result != USB_STOR_XFER_GOOD) |
| 1024 | return USB_STOR_TRANSPORT_ERROR; |
| 1025 | |
| 1026 | /* DATA STAGE */ |
| 1027 | /* send/receive data payload, if there is any */ |
| 1028 | |
| 1029 | /* Some USB-IDE converter chips need a 100us delay between the |
| 1030 | * command phase and the data phase. Some devices need a little |
| 1031 | * more than that, probably because of clock rate inaccuracies. */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 1032 | if (unlikely(us->fflags & US_FL_GO_SLOW)) |
Phil Dibowitz | e4334fa | 2005-04-18 17:39:27 -0700 | [diff] [blame] | 1033 | udelay(125); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1034 | |
| 1035 | if (transfer_length) { |
| 1036 | unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? |
| 1037 | us->recv_bulk_pipe : us->send_bulk_pipe; |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 1038 | result = usb_stor_bulk_srb(us, pipe, srb); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1039 | US_DEBUGP("Bulk data transfer result 0x%x\n", result); |
| 1040 | if (result == USB_STOR_XFER_ERROR) |
| 1041 | return USB_STOR_TRANSPORT_ERROR; |
| 1042 | |
| 1043 | /* If the device tried to send back more data than the |
| 1044 | * amount requested, the spec requires us to transfer |
| 1045 | * the CSW anyway. Since there's no point retrying the |
| 1046 | * the command, we'll return fake sense data indicating |
| 1047 | * Illegal Request, Invalid Field in CDB. |
| 1048 | */ |
| 1049 | if (result == USB_STOR_XFER_LONG) |
| 1050 | fake_sense = 1; |
| 1051 | } |
| 1052 | |
| 1053 | /* See flow chart on pg 15 of the Bulk Only Transport spec for |
| 1054 | * an explanation of how this code works. |
| 1055 | */ |
| 1056 | |
| 1057 | /* get CSW for device status */ |
| 1058 | US_DEBUGP("Attempting to get CSW...\n"); |
| 1059 | result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 1060 | bcs, US_BULK_CS_WRAP_LEN, &cswlen); |
| 1061 | |
| 1062 | /* Some broken devices add unnecessary zero-length packets to the |
| 1063 | * end of their data transfers. Such packets show up as 0-length |
| 1064 | * CSWs. If we encounter such a thing, try to read the CSW again. |
| 1065 | */ |
| 1066 | if (result == USB_STOR_XFER_SHORT && cswlen == 0) { |
| 1067 | US_DEBUGP("Received 0-length CSW; retrying...\n"); |
| 1068 | result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 1069 | bcs, US_BULK_CS_WRAP_LEN, &cswlen); |
| 1070 | } |
| 1071 | |
| 1072 | /* did the attempt to read the CSW fail? */ |
| 1073 | if (result == USB_STOR_XFER_STALLED) { |
| 1074 | |
| 1075 | /* get the status again */ |
| 1076 | US_DEBUGP("Attempting to get CSW (2nd try)...\n"); |
| 1077 | result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| 1078 | bcs, US_BULK_CS_WRAP_LEN, NULL); |
| 1079 | } |
| 1080 | |
| 1081 | /* if we still have a failure at this point, we're in trouble */ |
| 1082 | US_DEBUGP("Bulk status result = %d\n", result); |
| 1083 | if (result != USB_STOR_XFER_GOOD) |
| 1084 | return USB_STOR_TRANSPORT_ERROR; |
| 1085 | |
| 1086 | /* check bulk status */ |
| 1087 | residue = le32_to_cpu(bcs->Residue); |
| 1088 | US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", |
| 1089 | le32_to_cpu(bcs->Signature), bcs->Tag, |
| 1090 | residue, bcs->Status); |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 1091 | if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) || |
Constantin Baranov | cc36bdd | 2008-03-16 20:04:23 +0000 | [diff] [blame] | 1092 | bcs->Status > US_BULK_STAT_PHASE) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1093 | US_DEBUGP("Bulk logical error\n"); |
| 1094 | return USB_STOR_TRANSPORT_ERROR; |
| 1095 | } |
| 1096 | |
| 1097 | /* Some broken devices report odd signatures, so we do not check them |
| 1098 | * for validity against the spec. We store the first one we see, |
| 1099 | * and check subsequent transfers for validity against this signature. |
| 1100 | */ |
| 1101 | if (!us->bcs_signature) { |
| 1102 | us->bcs_signature = bcs->Signature; |
| 1103 | if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN)) |
| 1104 | US_DEBUGP("Learnt BCS signature 0x%08X\n", |
| 1105 | le32_to_cpu(us->bcs_signature)); |
| 1106 | } else if (bcs->Signature != us->bcs_signature) { |
| 1107 | US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", |
| 1108 | le32_to_cpu(bcs->Signature), |
| 1109 | le32_to_cpu(us->bcs_signature)); |
| 1110 | return USB_STOR_TRANSPORT_ERROR; |
| 1111 | } |
| 1112 | |
| 1113 | /* try to compute the actual residue, based on how much data |
| 1114 | * was really transferred and what the device tells us */ |
Alan Stern | 59f4ff2 | 2008-07-29 11:58:06 -0400 | [diff] [blame] | 1115 | if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) { |
| 1116 | |
| 1117 | /* Heuristically detect devices that generate bogus residues |
| 1118 | * by seeing what happens with INQUIRY and READ CAPACITY |
| 1119 | * commands. |
| 1120 | */ |
| 1121 | if (bcs->Status == US_BULK_STAT_OK && |
| 1122 | scsi_get_resid(srb) == 0 && |
| 1123 | ((srb->cmnd[0] == INQUIRY && |
| 1124 | transfer_length == 36) || |
| 1125 | (srb->cmnd[0] == READ_CAPACITY && |
| 1126 | transfer_length == 8))) { |
| 1127 | us->fflags |= US_FL_IGNORE_RESIDUE; |
| 1128 | |
| 1129 | } else { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1130 | residue = min(residue, transfer_length); |
Boaz Harrosh | 6d416e6 | 2007-09-10 18:01:08 +0300 | [diff] [blame] | 1131 | scsi_set_resid(srb, max(scsi_get_resid(srb), |
| 1132 | (int) residue)); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1133 | } |
| 1134 | } |
| 1135 | |
| 1136 | /* based on the status code, we report good or bad */ |
| 1137 | switch (bcs->Status) { |
| 1138 | case US_BULK_STAT_OK: |
| 1139 | /* device babbled -- return fake sense data */ |
| 1140 | if (fake_sense) { |
| 1141 | memcpy(srb->sense_buffer, |
| 1142 | usb_stor_sense_invalidCDB, |
| 1143 | sizeof(usb_stor_sense_invalidCDB)); |
| 1144 | return USB_STOR_TRANSPORT_NO_SENSE; |
| 1145 | } |
| 1146 | |
| 1147 | /* command good -- note that data could be short */ |
| 1148 | return USB_STOR_TRANSPORT_GOOD; |
| 1149 | |
| 1150 | case US_BULK_STAT_FAIL: |
| 1151 | /* command failed */ |
| 1152 | return USB_STOR_TRANSPORT_FAILED; |
| 1153 | |
| 1154 | case US_BULK_STAT_PHASE: |
| 1155 | /* phase error -- note that a transport reset will be |
| 1156 | * invoked by the invoke_transport() function |
| 1157 | */ |
| 1158 | return USB_STOR_TRANSPORT_ERROR; |
| 1159 | } |
| 1160 | |
| 1161 | /* we should never get here, but if we do, we're in trouble */ |
| 1162 | return USB_STOR_TRANSPORT_ERROR; |
| 1163 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 1164 | EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1165 | |
| 1166 | /*********************************************************************** |
| 1167 | * Reset routines |
| 1168 | ***********************************************************************/ |
| 1169 | |
| 1170 | /* This is the common part of the device reset code. |
| 1171 | * |
| 1172 | * It's handy that every transport mechanism uses the control endpoint for |
| 1173 | * resets. |
| 1174 | * |
Matthew Dharm | 5203ad4 | 2005-06-06 17:19:29 -0700 | [diff] [blame] | 1175 | * Basically, we send a reset with a 5-second timeout, so we don't get |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1176 | * jammed attempting to do the reset. |
| 1177 | */ |
| 1178 | static int usb_stor_reset_common(struct us_data *us, |
| 1179 | u8 request, u8 requesttype, |
| 1180 | u16 value, u16 index, void *data, u16 size) |
| 1181 | { |
| 1182 | int result; |
| 1183 | int result2; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1184 | |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 1185 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1186 | US_DEBUGP("No reset during disconnect\n"); |
| 1187 | return -EIO; |
| 1188 | } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1189 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1190 | result = usb_stor_control_msg(us, us->send_ctrl_pipe, |
| 1191 | request, requesttype, value, index, data, size, |
Matthew Dharm | 5203ad4 | 2005-06-06 17:19:29 -0700 | [diff] [blame] | 1192 | 5*HZ); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1193 | if (result < 0) { |
| 1194 | US_DEBUGP("Soft reset failed: %d\n", result); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1195 | return result; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1196 | } |
| 1197 | |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 1198 | /* Give the device some time to recover from the reset, |
| 1199 | * but don't delay disconnect processing. */ |
| 1200 | wait_event_interruptible_timeout(us->delay_wait, |
| 1201 | test_bit(US_FLIDX_DISCONNECTING, &us->dflags), |
| 1202 | HZ*6); |
| 1203 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1204 | US_DEBUGP("Reset interrupted by disconnect\n"); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1205 | return -EIO; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1206 | } |
| 1207 | |
| 1208 | US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n"); |
| 1209 | result = usb_stor_clear_halt(us, us->recv_bulk_pipe); |
| 1210 | |
| 1211 | US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n"); |
| 1212 | result2 = usb_stor_clear_halt(us, us->send_bulk_pipe); |
| 1213 | |
Matthew Dharm | 5203ad4 | 2005-06-06 17:19:29 -0700 | [diff] [blame] | 1214 | /* return a result code based on the result of the clear-halts */ |
| 1215 | if (result >= 0) |
| 1216 | result = result2; |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1217 | if (result < 0) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1218 | US_DEBUGP("Soft reset failed\n"); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1219 | else |
| 1220 | US_DEBUGP("Soft reset done\n"); |
| 1221 | return result; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1222 | } |
| 1223 | |
| 1224 | /* This issues a CB[I] Reset to the device in question |
| 1225 | */ |
| 1226 | #define CB_RESET_CMD_SIZE 12 |
| 1227 | |
| 1228 | int usb_stor_CB_reset(struct us_data *us) |
| 1229 | { |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 1230 | US_DEBUGP("%s called\n", __func__); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1231 | |
| 1232 | memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); |
| 1233 | us->iobuf[0] = SEND_DIAGNOSTIC; |
| 1234 | us->iobuf[1] = 4; |
| 1235 | return usb_stor_reset_common(us, US_CBI_ADSC, |
| 1236 | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 1237 | 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE); |
| 1238 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 1239 | EXPORT_SYMBOL_GPL(usb_stor_CB_reset); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1240 | |
| 1241 | /* This issues a Bulk-only Reset to the device in question, including |
| 1242 | * clearing the subsequent endpoint halts that may occur. |
| 1243 | */ |
| 1244 | int usb_stor_Bulk_reset(struct us_data *us) |
| 1245 | { |
Harvey Harrison | 441b62c | 2008-03-03 16:08:34 -0800 | [diff] [blame] | 1246 | US_DEBUGP("%s called\n", __func__); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1247 | |
| 1248 | return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, |
| 1249 | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 1250 | 0, us->ifnum, NULL, 0); |
| 1251 | } |
Alan Stern | e6e244b | 2009-02-12 14:47:44 -0500 | [diff] [blame] | 1252 | EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1253 | |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 1254 | /* Issue a USB port reset to the device. The caller must not hold |
| 1255 | * us->dev_mutex. |
| 1256 | */ |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1257 | int usb_stor_port_reset(struct us_data *us) |
| 1258 | { |
Alan Stern | 011b15d | 2008-11-04 11:29:27 -0500 | [diff] [blame] | 1259 | int result; |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1260 | |
Alan Stern | 011b15d | 2008-11-04 11:29:27 -0500 | [diff] [blame] | 1261 | result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 1262 | if (result < 0) |
| 1263 | US_DEBUGP("unable to lock device for reset: %d\n", result); |
| 1264 | else { |
| 1265 | /* Were we disconnected while waiting for the lock? */ |
Alan Stern | 7e4d6c3 | 2008-05-01 15:35:18 -0400 | [diff] [blame] | 1266 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 1267 | result = -EIO; |
| 1268 | US_DEBUGP("No reset during disconnect\n"); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1269 | } else { |
Ming Lei | 742120c | 2008-06-18 22:00:29 +0800 | [diff] [blame] | 1270 | result = usb_reset_device(us->pusb_dev); |
| 1271 | US_DEBUGP("usb_reset_device returns %d\n", |
Alan Stern | 47104b0 | 2006-06-01 13:52:56 -0400 | [diff] [blame] | 1272 | result); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1273 | } |
Alan Stern | 011b15d | 2008-11-04 11:29:27 -0500 | [diff] [blame] | 1274 | usb_unlock_device(us->pusb_dev); |
Matthew Dharm | 4d07ef7 | 2005-06-06 17:21:41 -0700 | [diff] [blame] | 1275 | } |
| 1276 | return result; |
| 1277 | } |