| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1 | /*************************************************************************** | 
|  | 2 | * | 
|  | 3 | * Copyright (C) 2004-2008 SMSC | 
|  | 4 | * Copyright (C) 2005-2008 ARM | 
|  | 5 | * | 
|  | 6 | * This program is free software; you can redistribute it and/or | 
|  | 7 | * modify it under the terms of the GNU General Public License | 
|  | 8 | * as published by the Free Software Foundation; either version 2 | 
|  | 9 | * of the License, or (at your option) any later version. | 
|  | 10 | * | 
|  | 11 | * This program is distributed in the hope that it will be useful, | 
|  | 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 14 | * GNU General Public License for more details. | 
|  | 15 | * | 
|  | 16 | * You should have received a copy of the GNU General Public License | 
|  | 17 | * along with this program; if not, write to the Free Software | 
|  | 18 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
|  | 19 | * | 
|  | 20 | *************************************************************************** | 
|  | 21 | * Rewritten, heavily based on smsc911x simple driver by SMSC. | 
|  | 22 | * Partly uses io macros from smc91x.c by Nicolas Pitre | 
|  | 23 | * | 
|  | 24 | * Supported devices: | 
|  | 25 | *   LAN9115, LAN9116, LAN9117, LAN9118 | 
|  | 26 | *   LAN9215, LAN9216, LAN9217, LAN9218 | 
|  | 27 | *   LAN9210, LAN9211 | 
|  | 28 | *   LAN9220, LAN9221 | 
|  | 29 | * | 
|  | 30 | */ | 
|  | 31 |  | 
|  | 32 | #include <linux/crc32.h> | 
|  | 33 | #include <linux/delay.h> | 
|  | 34 | #include <linux/errno.h> | 
|  | 35 | #include <linux/etherdevice.h> | 
|  | 36 | #include <linux/ethtool.h> | 
|  | 37 | #include <linux/init.h> | 
|  | 38 | #include <linux/ioport.h> | 
|  | 39 | #include <linux/kernel.h> | 
|  | 40 | #include <linux/module.h> | 
|  | 41 | #include <linux/netdevice.h> | 
|  | 42 | #include <linux/platform_device.h> | 
|  | 43 | #include <linux/sched.h> | 
|  | 44 | #include <linux/slab.h> | 
|  | 45 | #include <linux/timer.h> | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 46 | #include <linux/bug.h> | 
|  | 47 | #include <linux/bitops.h> | 
|  | 48 | #include <linux/irq.h> | 
|  | 49 | #include <linux/io.h> | 
| Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 50 | #include <linux/swab.h> | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 51 | #include <linux/phy.h> | 
|  | 52 | #include <linux/smsc911x.h> | 
|  | 53 | #include "smsc911x.h" | 
|  | 54 |  | 
|  | 55 | #define SMSC_CHIPNAME		"smsc911x" | 
|  | 56 | #define SMSC_MDIONAME		"smsc911x-mdio" | 
|  | 57 | #define SMSC_DRV_VERSION	"2008-10-21" | 
|  | 58 |  | 
|  | 59 | MODULE_LICENSE("GPL"); | 
|  | 60 | MODULE_VERSION(SMSC_DRV_VERSION); | 
|  | 61 |  | 
|  | 62 | #if USE_DEBUG > 0 | 
|  | 63 | static int debug = 16; | 
|  | 64 | #else | 
|  | 65 | static int debug = 3; | 
|  | 66 | #endif | 
|  | 67 |  | 
|  | 68 | module_param(debug, int, 0); | 
|  | 69 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); | 
|  | 70 |  | 
|  | 71 | struct smsc911x_data { | 
|  | 72 | void __iomem *ioaddr; | 
|  | 73 |  | 
|  | 74 | unsigned int idrev; | 
|  | 75 |  | 
|  | 76 | /* used to decide which workarounds apply */ | 
|  | 77 | unsigned int generation; | 
|  | 78 |  | 
|  | 79 | /* device configuration (copied from platform_data during probe) */ | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 80 | struct smsc911x_platform_config config; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 81 |  | 
|  | 82 | /* This needs to be acquired before calling any of below: | 
|  | 83 | * smsc911x_mac_read(), smsc911x_mac_write() | 
|  | 84 | */ | 
|  | 85 | spinlock_t mac_lock; | 
|  | 86 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 87 | /* spinlock to ensure 16-bit accesses are serialised. | 
|  | 88 | * unused with a 32-bit bus */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 89 | spinlock_t dev_lock; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 90 |  | 
|  | 91 | struct phy_device *phy_dev; | 
|  | 92 | struct mii_bus *mii_bus; | 
|  | 93 | int phy_irq[PHY_MAX_ADDR]; | 
|  | 94 | unsigned int using_extphy; | 
|  | 95 | int last_duplex; | 
|  | 96 | int last_carrier; | 
|  | 97 |  | 
|  | 98 | u32 msg_enable; | 
|  | 99 | unsigned int gpio_setting; | 
|  | 100 | unsigned int gpio_orig_setting; | 
|  | 101 | struct net_device *dev; | 
|  | 102 | struct napi_struct napi; | 
|  | 103 |  | 
|  | 104 | unsigned int software_irq_signal; | 
|  | 105 |  | 
|  | 106 | #ifdef USE_PHY_WORK_AROUND | 
|  | 107 | #define MIN_PACKET_SIZE (64) | 
|  | 108 | char loopback_tx_pkt[MIN_PACKET_SIZE]; | 
|  | 109 | char loopback_rx_pkt[MIN_PACKET_SIZE]; | 
|  | 110 | unsigned int resetcount; | 
|  | 111 | #endif | 
|  | 112 |  | 
|  | 113 | /* Members for Multicast filter workaround */ | 
|  | 114 | unsigned int multicast_update_pending; | 
|  | 115 | unsigned int set_bits_mask; | 
|  | 116 | unsigned int clear_bits_mask; | 
|  | 117 | unsigned int hashhi; | 
|  | 118 | unsigned int hashlo; | 
|  | 119 | }; | 
|  | 120 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 121 | /* The 16-bit access functions are significantly slower, due to the locking | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 122 | * necessary.  If your bus hardware can be configured to do this for you | 
|  | 123 | * (in response to a single 32-bit operation from software), you should use | 
|  | 124 | * the 32-bit access functions instead. */ | 
|  | 125 |  | 
|  | 126 | static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) | 
|  | 127 | { | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 128 | if (pdata->config.flags & SMSC911X_USE_32BIT) | 
|  | 129 | return readl(pdata->ioaddr + reg); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 130 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 131 | if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
|  | 132 | u32 data; | 
|  | 133 | unsigned long flags; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 134 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 135 | /* these two 16-bit reads must be performed consecutively, so | 
|  | 136 | * must not be interrupted by our own ISR (which would start | 
|  | 137 | * another read operation) */ | 
|  | 138 | spin_lock_irqsave(&pdata->dev_lock, flags); | 
|  | 139 | data = ((readw(pdata->ioaddr + reg) & 0xFFFF) | | 
|  | 140 | ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); | 
|  | 141 | spin_unlock_irqrestore(&pdata->dev_lock, flags); | 
|  | 142 |  | 
|  | 143 | return data; | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | BUG(); | 
| Steve Glendinning | 702403a | 2009-01-11 00:14:27 -0800 | [diff] [blame] | 147 | return 0; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 148 | } | 
|  | 149 |  | 
|  | 150 | static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, | 
|  | 151 | u32 val) | 
|  | 152 | { | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 153 | if (pdata->config.flags & SMSC911X_USE_32BIT) { | 
|  | 154 | writel(val, pdata->ioaddr + reg); | 
|  | 155 | return; | 
|  | 156 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 157 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 158 | if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
|  | 159 | unsigned long flags; | 
|  | 160 |  | 
|  | 161 | /* these two 16-bit writes must be performed consecutively, so | 
|  | 162 | * must not be interrupted by our own ISR (which would start | 
|  | 163 | * another read operation) */ | 
|  | 164 | spin_lock_irqsave(&pdata->dev_lock, flags); | 
|  | 165 | writew(val & 0xFFFF, pdata->ioaddr + reg); | 
|  | 166 | writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); | 
|  | 167 | spin_unlock_irqrestore(&pdata->dev_lock, flags); | 
|  | 168 | return; | 
|  | 169 | } | 
|  | 170 |  | 
|  | 171 | BUG(); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 172 | } | 
|  | 173 |  | 
|  | 174 | /* Writes a packet to the TX_DATA_FIFO */ | 
|  | 175 | static inline void | 
|  | 176 | smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, | 
|  | 177 | unsigned int wordcount) | 
|  | 178 | { | 
| Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 179 | if (pdata->config.flags & SMSC911X_SWAP_FIFO) { | 
|  | 180 | while (wordcount--) | 
|  | 181 | smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++)); | 
|  | 182 | return; | 
|  | 183 | } | 
|  | 184 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 185 | if (pdata->config.flags & SMSC911X_USE_32BIT) { | 
|  | 186 | writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); | 
|  | 187 | return; | 
|  | 188 | } | 
|  | 189 |  | 
|  | 190 | if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
|  | 191 | while (wordcount--) | 
|  | 192 | smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); | 
|  | 193 | return; | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | BUG(); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 197 | } | 
|  | 198 |  | 
|  | 199 | /* Reads a packet out of the RX_DATA_FIFO */ | 
|  | 200 | static inline void | 
|  | 201 | smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, | 
|  | 202 | unsigned int wordcount) | 
|  | 203 | { | 
| Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 204 | if (pdata->config.flags & SMSC911X_SWAP_FIFO) { | 
|  | 205 | while (wordcount--) | 
|  | 206 | *buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO)); | 
|  | 207 | return; | 
|  | 208 | } | 
|  | 209 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 210 | if (pdata->config.flags & SMSC911X_USE_32BIT) { | 
|  | 211 | readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); | 
|  | 212 | return; | 
|  | 213 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 214 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 215 | if (pdata->config.flags & SMSC911X_USE_16BIT) { | 
|  | 216 | while (wordcount--) | 
|  | 217 | *buf++ = smsc911x_reg_read(pdata, RX_DATA_FIFO); | 
|  | 218 | return; | 
|  | 219 | } | 
|  | 220 |  | 
|  | 221 | BUG(); | 
|  | 222 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 223 |  | 
|  | 224 | /* waits for MAC not busy, with timeout.  Only called by smsc911x_mac_read | 
|  | 225 | * and smsc911x_mac_write, so assumes mac_lock is held */ | 
|  | 226 | static int smsc911x_mac_complete(struct smsc911x_data *pdata) | 
|  | 227 | { | 
|  | 228 | int i; | 
|  | 229 | u32 val; | 
|  | 230 |  | 
|  | 231 | SMSC_ASSERT_MAC_LOCK(pdata); | 
|  | 232 |  | 
|  | 233 | for (i = 0; i < 40; i++) { | 
|  | 234 | val = smsc911x_reg_read(pdata, MAC_CSR_CMD); | 
|  | 235 | if (!(val & MAC_CSR_CMD_CSR_BUSY_)) | 
|  | 236 | return 0; | 
|  | 237 | } | 
|  | 238 | SMSC_WARNING(HW, "Timed out waiting for MAC not BUSY. " | 
|  | 239 | "MAC_CSR_CMD: 0x%08X", val); | 
|  | 240 | return -EIO; | 
|  | 241 | } | 
|  | 242 |  | 
|  | 243 | /* Fetches a MAC register value. Assumes mac_lock is acquired */ | 
|  | 244 | static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) | 
|  | 245 | { | 
|  | 246 | unsigned int temp; | 
|  | 247 |  | 
|  | 248 | SMSC_ASSERT_MAC_LOCK(pdata); | 
|  | 249 |  | 
|  | 250 | temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); | 
|  | 251 | if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { | 
|  | 252 | SMSC_WARNING(HW, "MAC busy at entry"); | 
|  | 253 | return 0xFFFFFFFF; | 
|  | 254 | } | 
|  | 255 |  | 
|  | 256 | /* Send the MAC cmd */ | 
|  | 257 | smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | | 
|  | 258 | MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); | 
|  | 259 |  | 
|  | 260 | /* Workaround for hardware read-after-write restriction */ | 
|  | 261 | temp = smsc911x_reg_read(pdata, BYTE_TEST); | 
|  | 262 |  | 
|  | 263 | /* Wait for the read to complete */ | 
|  | 264 | if (likely(smsc911x_mac_complete(pdata) == 0)) | 
|  | 265 | return smsc911x_reg_read(pdata, MAC_CSR_DATA); | 
|  | 266 |  | 
|  | 267 | SMSC_WARNING(HW, "MAC busy after read"); | 
|  | 268 | return 0xFFFFFFFF; | 
|  | 269 | } | 
|  | 270 |  | 
|  | 271 | /* Set a mac register, mac_lock must be acquired before calling */ | 
|  | 272 | static void smsc911x_mac_write(struct smsc911x_data *pdata, | 
|  | 273 | unsigned int offset, u32 val) | 
|  | 274 | { | 
|  | 275 | unsigned int temp; | 
|  | 276 |  | 
|  | 277 | SMSC_ASSERT_MAC_LOCK(pdata); | 
|  | 278 |  | 
|  | 279 | temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); | 
|  | 280 | if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { | 
|  | 281 | SMSC_WARNING(HW, | 
|  | 282 | "smsc911x_mac_write failed, MAC busy at entry"); | 
|  | 283 | return; | 
|  | 284 | } | 
|  | 285 |  | 
|  | 286 | /* Send data to write */ | 
|  | 287 | smsc911x_reg_write(pdata, MAC_CSR_DATA, val); | 
|  | 288 |  | 
|  | 289 | /* Write the actual data */ | 
|  | 290 | smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | | 
|  | 291 | MAC_CSR_CMD_CSR_BUSY_)); | 
|  | 292 |  | 
|  | 293 | /* Workaround for hardware read-after-write restriction */ | 
|  | 294 | temp = smsc911x_reg_read(pdata, BYTE_TEST); | 
|  | 295 |  | 
|  | 296 | /* Wait for the write to complete */ | 
|  | 297 | if (likely(smsc911x_mac_complete(pdata) == 0)) | 
|  | 298 | return; | 
|  | 299 |  | 
|  | 300 | SMSC_WARNING(HW, | 
|  | 301 | "smsc911x_mac_write failed, MAC busy after write"); | 
|  | 302 | } | 
|  | 303 |  | 
|  | 304 | /* Get a phy register */ | 
|  | 305 | static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) | 
|  | 306 | { | 
|  | 307 | struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; | 
|  | 308 | unsigned long flags; | 
|  | 309 | unsigned int addr; | 
|  | 310 | int i, reg; | 
|  | 311 |  | 
|  | 312 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 313 |  | 
|  | 314 | /* Confirm MII not busy */ | 
|  | 315 | if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
|  | 316 | SMSC_WARNING(HW, | 
|  | 317 | "MII is busy in smsc911x_mii_read???"); | 
|  | 318 | reg = -EIO; | 
|  | 319 | goto out; | 
|  | 320 | } | 
|  | 321 |  | 
|  | 322 | /* Set the address, index & direction (read from PHY) */ | 
|  | 323 | addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); | 
|  | 324 | smsc911x_mac_write(pdata, MII_ACC, addr); | 
|  | 325 |  | 
|  | 326 | /* Wait for read to complete w/ timeout */ | 
|  | 327 | for (i = 0; i < 100; i++) | 
|  | 328 | if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
|  | 329 | reg = smsc911x_mac_read(pdata, MII_DATA); | 
|  | 330 | goto out; | 
|  | 331 | } | 
|  | 332 |  | 
| Steve Glendinning | 150899d | 2009-04-08 15:42:15 -0700 | [diff] [blame] | 333 | SMSC_WARNING(HW, "Timed out waiting for MII read to finish"); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 334 | reg = -EIO; | 
|  | 335 |  | 
|  | 336 | out: | 
|  | 337 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 338 | return reg; | 
|  | 339 | } | 
|  | 340 |  | 
|  | 341 | /* Set a phy register */ | 
|  | 342 | static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, | 
|  | 343 | u16 val) | 
|  | 344 | { | 
|  | 345 | struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; | 
|  | 346 | unsigned long flags; | 
|  | 347 | unsigned int addr; | 
|  | 348 | int i, reg; | 
|  | 349 |  | 
|  | 350 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 351 |  | 
|  | 352 | /* Confirm MII not busy */ | 
|  | 353 | if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
|  | 354 | SMSC_WARNING(HW, | 
|  | 355 | "MII is busy in smsc911x_mii_write???"); | 
|  | 356 | reg = -EIO; | 
|  | 357 | goto out; | 
|  | 358 | } | 
|  | 359 |  | 
|  | 360 | /* Put the data to write in the MAC */ | 
|  | 361 | smsc911x_mac_write(pdata, MII_DATA, val); | 
|  | 362 |  | 
|  | 363 | /* Set the address, index & direction (write to PHY) */ | 
|  | 364 | addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | | 
|  | 365 | MII_ACC_MII_WRITE_; | 
|  | 366 | smsc911x_mac_write(pdata, MII_ACC, addr); | 
|  | 367 |  | 
|  | 368 | /* Wait for write to complete w/ timeout */ | 
|  | 369 | for (i = 0; i < 100; i++) | 
|  | 370 | if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { | 
|  | 371 | reg = 0; | 
|  | 372 | goto out; | 
|  | 373 | } | 
|  | 374 |  | 
|  | 375 | SMSC_WARNING(HW, "Timed out waiting for MII write to finish"); | 
|  | 376 | reg = -EIO; | 
|  | 377 |  | 
|  | 378 | out: | 
|  | 379 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 380 | return reg; | 
|  | 381 | } | 
|  | 382 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 383 | /* Switch to external phy. Assumes tx and rx are stopped. */ | 
|  | 384 | static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 385 | { | 
|  | 386 | unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); | 
|  | 387 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 388 | /* Disable phy clocks to the MAC */ | 
|  | 389 | hwcfg &= (~HW_CFG_PHY_CLK_SEL_); | 
|  | 390 | hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; | 
|  | 391 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
|  | 392 | udelay(10);	/* Enough time for clocks to stop */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 393 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 394 | /* Switch to external phy */ | 
|  | 395 | hwcfg |= HW_CFG_EXT_PHY_EN_; | 
|  | 396 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 397 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 398 | /* Enable phy clocks to the MAC */ | 
|  | 399 | hwcfg &= (~HW_CFG_PHY_CLK_SEL_); | 
|  | 400 | hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; | 
|  | 401 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
|  | 402 | udelay(10);	/* Enough time for clocks to restart */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 403 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 404 | hwcfg |= HW_CFG_SMI_SEL_; | 
|  | 405 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); | 
|  | 406 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 407 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 408 | /* Autodetects and enables external phy if present on supported chips. | 
|  | 409 | * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY | 
|  | 410 | * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ | 
|  | 411 | static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) | 
|  | 412 | { | 
|  | 413 | unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 414 |  | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 415 | if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { | 
|  | 416 | SMSC_TRACE(HW, "Forcing internal PHY"); | 
|  | 417 | pdata->using_extphy = 0; | 
|  | 418 | } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { | 
|  | 419 | SMSC_TRACE(HW, "Forcing external PHY"); | 
|  | 420 | smsc911x_phy_enable_external(pdata); | 
|  | 421 | pdata->using_extphy = 1; | 
|  | 422 | } else if (hwcfg & HW_CFG_EXT_PHY_DET_) { | 
|  | 423 | SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY"); | 
|  | 424 | smsc911x_phy_enable_external(pdata); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 425 | pdata->using_extphy = 1; | 
|  | 426 | } else { | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 427 | SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY"); | 
|  | 428 | pdata->using_extphy = 0; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 429 | } | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 430 | } | 
|  | 431 |  | 
|  | 432 | /* Fetches a tx status out of the status fifo */ | 
|  | 433 | static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) | 
|  | 434 | { | 
|  | 435 | unsigned int result = | 
|  | 436 | smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; | 
|  | 437 |  | 
|  | 438 | if (result != 0) | 
|  | 439 | result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); | 
|  | 440 |  | 
|  | 441 | return result; | 
|  | 442 | } | 
|  | 443 |  | 
|  | 444 | /* Fetches the next rx status */ | 
|  | 445 | static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) | 
|  | 446 | { | 
|  | 447 | unsigned int result = | 
|  | 448 | smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; | 
|  | 449 |  | 
|  | 450 | if (result != 0) | 
|  | 451 | result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); | 
|  | 452 |  | 
|  | 453 | return result; | 
|  | 454 | } | 
|  | 455 |  | 
|  | 456 | #ifdef USE_PHY_WORK_AROUND | 
|  | 457 | static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) | 
|  | 458 | { | 
|  | 459 | unsigned int tries; | 
|  | 460 | u32 wrsz; | 
|  | 461 | u32 rdsz; | 
|  | 462 | ulong bufp; | 
|  | 463 |  | 
|  | 464 | for (tries = 0; tries < 10; tries++) { | 
|  | 465 | unsigned int txcmd_a; | 
|  | 466 | unsigned int txcmd_b; | 
|  | 467 | unsigned int status; | 
|  | 468 | unsigned int pktlength; | 
|  | 469 | unsigned int i; | 
|  | 470 |  | 
|  | 471 | /* Zero-out rx packet memory */ | 
|  | 472 | memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); | 
|  | 473 |  | 
|  | 474 | /* Write tx packet to 118 */ | 
|  | 475 | txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; | 
|  | 476 | txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; | 
|  | 477 | txcmd_a |= MIN_PACKET_SIZE; | 
|  | 478 |  | 
|  | 479 | txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; | 
|  | 480 |  | 
|  | 481 | smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); | 
|  | 482 | smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); | 
|  | 483 |  | 
|  | 484 | bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); | 
|  | 485 | wrsz = MIN_PACKET_SIZE + 3; | 
|  | 486 | wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); | 
|  | 487 | wrsz >>= 2; | 
|  | 488 |  | 
|  | 489 | smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz); | 
|  | 490 |  | 
|  | 491 | /* Wait till transmit is done */ | 
|  | 492 | i = 60; | 
|  | 493 | do { | 
|  | 494 | udelay(5); | 
|  | 495 | status = smsc911x_tx_get_txstatus(pdata); | 
|  | 496 | } while ((i--) && (!status)); | 
|  | 497 |  | 
|  | 498 | if (!status) { | 
|  | 499 | SMSC_WARNING(HW, "Failed to transmit " | 
|  | 500 | "during loopback test"); | 
|  | 501 | continue; | 
|  | 502 | } | 
|  | 503 | if (status & TX_STS_ES_) { | 
|  | 504 | SMSC_WARNING(HW, "Transmit encountered " | 
|  | 505 | "errors during loopback test"); | 
|  | 506 | continue; | 
|  | 507 | } | 
|  | 508 |  | 
|  | 509 | /* Wait till receive is done */ | 
|  | 510 | i = 60; | 
|  | 511 | do { | 
|  | 512 | udelay(5); | 
|  | 513 | status = smsc911x_rx_get_rxstatus(pdata); | 
|  | 514 | } while ((i--) && (!status)); | 
|  | 515 |  | 
|  | 516 | if (!status) { | 
|  | 517 | SMSC_WARNING(HW, | 
|  | 518 | "Failed to receive during loopback test"); | 
|  | 519 | continue; | 
|  | 520 | } | 
|  | 521 | if (status & RX_STS_ES_) { | 
|  | 522 | SMSC_WARNING(HW, "Receive encountered " | 
|  | 523 | "errors during loopback test"); | 
|  | 524 | continue; | 
|  | 525 | } | 
|  | 526 |  | 
|  | 527 | pktlength = ((status & 0x3FFF0000UL) >> 16); | 
|  | 528 | bufp = (ulong)pdata->loopback_rx_pkt; | 
|  | 529 | rdsz = pktlength + 3; | 
|  | 530 | rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); | 
|  | 531 | rdsz >>= 2; | 
|  | 532 |  | 
|  | 533 | smsc911x_rx_readfifo(pdata, (unsigned int *)bufp, rdsz); | 
|  | 534 |  | 
|  | 535 | if (pktlength != (MIN_PACKET_SIZE + 4)) { | 
|  | 536 | SMSC_WARNING(HW, "Unexpected packet size " | 
|  | 537 | "during loop back test, size=%d, will retry", | 
|  | 538 | pktlength); | 
|  | 539 | } else { | 
|  | 540 | unsigned int j; | 
|  | 541 | int mismatch = 0; | 
|  | 542 | for (j = 0; j < MIN_PACKET_SIZE; j++) { | 
|  | 543 | if (pdata->loopback_tx_pkt[j] | 
|  | 544 | != pdata->loopback_rx_pkt[j]) { | 
|  | 545 | mismatch = 1; | 
|  | 546 | break; | 
|  | 547 | } | 
|  | 548 | } | 
|  | 549 | if (!mismatch) { | 
|  | 550 | SMSC_TRACE(HW, "Successfully verified " | 
|  | 551 | "loopback packet"); | 
|  | 552 | return 0; | 
|  | 553 | } else { | 
|  | 554 | SMSC_WARNING(HW, "Data mismatch " | 
|  | 555 | "during loop back test, will retry"); | 
|  | 556 | } | 
|  | 557 | } | 
|  | 558 | } | 
|  | 559 |  | 
|  | 560 | return -EIO; | 
|  | 561 | } | 
|  | 562 |  | 
|  | 563 | static int smsc911x_phy_reset(struct smsc911x_data *pdata) | 
|  | 564 | { | 
|  | 565 | struct phy_device *phy_dev = pdata->phy_dev; | 
|  | 566 | unsigned int temp; | 
|  | 567 | unsigned int i = 100000; | 
|  | 568 |  | 
|  | 569 | BUG_ON(!phy_dev); | 
|  | 570 | BUG_ON(!phy_dev->bus); | 
|  | 571 |  | 
|  | 572 | SMSC_TRACE(HW, "Performing PHY BCR Reset"); | 
|  | 573 | smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); | 
|  | 574 | do { | 
|  | 575 | msleep(1); | 
|  | 576 | temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, | 
|  | 577 | MII_BMCR); | 
|  | 578 | } while ((i--) && (temp & BMCR_RESET)); | 
|  | 579 |  | 
|  | 580 | if (temp & BMCR_RESET) { | 
|  | 581 | SMSC_WARNING(HW, "PHY reset failed to complete."); | 
|  | 582 | return -EIO; | 
|  | 583 | } | 
|  | 584 | /* Extra delay required because the phy may not be completed with | 
|  | 585 | * its reset when BMCR_RESET is cleared. Specs say 256 uS is | 
|  | 586 | * enough delay but using 1ms here to be safe */ | 
|  | 587 | msleep(1); | 
|  | 588 |  | 
|  | 589 | return 0; | 
|  | 590 | } | 
|  | 591 |  | 
|  | 592 | static int smsc911x_phy_loopbacktest(struct net_device *dev) | 
|  | 593 | { | 
|  | 594 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 595 | struct phy_device *phy_dev = pdata->phy_dev; | 
|  | 596 | int result = -EIO; | 
|  | 597 | unsigned int i, val; | 
|  | 598 | unsigned long flags; | 
|  | 599 |  | 
|  | 600 | /* Initialise tx packet using broadcast destination address */ | 
|  | 601 | memset(pdata->loopback_tx_pkt, 0xff, ETH_ALEN); | 
|  | 602 |  | 
|  | 603 | /* Use incrementing source address */ | 
|  | 604 | for (i = 6; i < 12; i++) | 
|  | 605 | pdata->loopback_tx_pkt[i] = (char)i; | 
|  | 606 |  | 
|  | 607 | /* Set length type field */ | 
|  | 608 | pdata->loopback_tx_pkt[12] = 0x00; | 
|  | 609 | pdata->loopback_tx_pkt[13] = 0x00; | 
|  | 610 |  | 
|  | 611 | for (i = 14; i < MIN_PACKET_SIZE; i++) | 
|  | 612 | pdata->loopback_tx_pkt[i] = (char)i; | 
|  | 613 |  | 
|  | 614 | val = smsc911x_reg_read(pdata, HW_CFG); | 
|  | 615 | val &= HW_CFG_TX_FIF_SZ_; | 
|  | 616 | val |= HW_CFG_SF_; | 
|  | 617 | smsc911x_reg_write(pdata, HW_CFG, val); | 
|  | 618 |  | 
|  | 619 | smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); | 
|  | 620 | smsc911x_reg_write(pdata, RX_CFG, | 
|  | 621 | (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); | 
|  | 622 |  | 
|  | 623 | for (i = 0; i < 10; i++) { | 
|  | 624 | /* Set PHY to 10/FD, no ANEG, and loopback mode */ | 
|  | 625 | smsc911x_mii_write(phy_dev->bus, phy_dev->addr,	MII_BMCR, | 
|  | 626 | BMCR_LOOPBACK | BMCR_FULLDPLX); | 
|  | 627 |  | 
|  | 628 | /* Enable MAC tx/rx, FD */ | 
|  | 629 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 630 | smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ | 
|  | 631 | | MAC_CR_TXEN_ | MAC_CR_RXEN_); | 
|  | 632 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 633 |  | 
|  | 634 | if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { | 
|  | 635 | result = 0; | 
|  | 636 | break; | 
|  | 637 | } | 
|  | 638 | pdata->resetcount++; | 
|  | 639 |  | 
|  | 640 | /* Disable MAC rx */ | 
|  | 641 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 642 | smsc911x_mac_write(pdata, MAC_CR, 0); | 
|  | 643 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 644 |  | 
|  | 645 | smsc911x_phy_reset(pdata); | 
|  | 646 | } | 
|  | 647 |  | 
|  | 648 | /* Disable MAC */ | 
|  | 649 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 650 | smsc911x_mac_write(pdata, MAC_CR, 0); | 
|  | 651 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 652 |  | 
|  | 653 | /* Cancel PHY loopback mode */ | 
|  | 654 | smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); | 
|  | 655 |  | 
|  | 656 | smsc911x_reg_write(pdata, TX_CFG, 0); | 
|  | 657 | smsc911x_reg_write(pdata, RX_CFG, 0); | 
|  | 658 |  | 
|  | 659 | return result; | 
|  | 660 | } | 
|  | 661 | #endif				/* USE_PHY_WORK_AROUND */ | 
|  | 662 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 663 | static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) | 
|  | 664 | { | 
|  | 665 | struct phy_device *phy_dev = pdata->phy_dev; | 
|  | 666 | u32 afc = smsc911x_reg_read(pdata, AFC_CFG); | 
|  | 667 | u32 flow; | 
|  | 668 | unsigned long flags; | 
|  | 669 |  | 
|  | 670 | if (phy_dev->duplex == DUPLEX_FULL) { | 
|  | 671 | u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); | 
|  | 672 | u16 rmtadv = phy_read(phy_dev, MII_LPA); | 
| Steve Glendinning | bc02ff9 | 2008-12-16 02:00:48 -0800 | [diff] [blame] | 673 | u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 674 |  | 
|  | 675 | if (cap & FLOW_CTRL_RX) | 
|  | 676 | flow = 0xFFFF0002; | 
|  | 677 | else | 
|  | 678 | flow = 0; | 
|  | 679 |  | 
|  | 680 | if (cap & FLOW_CTRL_TX) | 
|  | 681 | afc |= 0xF; | 
|  | 682 | else | 
|  | 683 | afc &= ~0xF; | 
|  | 684 |  | 
|  | 685 | SMSC_TRACE(HW, "rx pause %s, tx pause %s", | 
|  | 686 | (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), | 
|  | 687 | (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); | 
|  | 688 | } else { | 
|  | 689 | SMSC_TRACE(HW, "half duplex"); | 
|  | 690 | flow = 0; | 
|  | 691 | afc |= 0xF; | 
|  | 692 | } | 
|  | 693 |  | 
|  | 694 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 695 | smsc911x_mac_write(pdata, FLOW, flow); | 
|  | 696 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 697 |  | 
|  | 698 | smsc911x_reg_write(pdata, AFC_CFG, afc); | 
|  | 699 | } | 
|  | 700 |  | 
|  | 701 | /* Update link mode if anything has changed.  Called periodically when the | 
|  | 702 | * PHY is in polling mode, even if nothing has changed. */ | 
|  | 703 | static void smsc911x_phy_adjust_link(struct net_device *dev) | 
|  | 704 | { | 
|  | 705 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 706 | struct phy_device *phy_dev = pdata->phy_dev; | 
|  | 707 | unsigned long flags; | 
|  | 708 | int carrier; | 
|  | 709 |  | 
|  | 710 | if (phy_dev->duplex != pdata->last_duplex) { | 
|  | 711 | unsigned int mac_cr; | 
|  | 712 | SMSC_TRACE(HW, "duplex state has changed"); | 
|  | 713 |  | 
|  | 714 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 715 | mac_cr = smsc911x_mac_read(pdata, MAC_CR); | 
|  | 716 | if (phy_dev->duplex) { | 
|  | 717 | SMSC_TRACE(HW, | 
|  | 718 | "configuring for full duplex mode"); | 
|  | 719 | mac_cr |= MAC_CR_FDPX_; | 
|  | 720 | } else { | 
|  | 721 | SMSC_TRACE(HW, | 
|  | 722 | "configuring for half duplex mode"); | 
|  | 723 | mac_cr &= ~MAC_CR_FDPX_; | 
|  | 724 | } | 
|  | 725 | smsc911x_mac_write(pdata, MAC_CR, mac_cr); | 
|  | 726 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 727 |  | 
|  | 728 | smsc911x_phy_update_flowcontrol(pdata); | 
|  | 729 | pdata->last_duplex = phy_dev->duplex; | 
|  | 730 | } | 
|  | 731 |  | 
|  | 732 | carrier = netif_carrier_ok(dev); | 
|  | 733 | if (carrier != pdata->last_carrier) { | 
|  | 734 | SMSC_TRACE(HW, "carrier state has changed"); | 
|  | 735 | if (carrier) { | 
|  | 736 | SMSC_TRACE(HW, "configuring for carrier OK"); | 
|  | 737 | if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && | 
|  | 738 | (!pdata->using_extphy)) { | 
|  | 739 | /* Restore orginal GPIO configuration */ | 
|  | 740 | pdata->gpio_setting = pdata->gpio_orig_setting; | 
|  | 741 | smsc911x_reg_write(pdata, GPIO_CFG, | 
|  | 742 | pdata->gpio_setting); | 
|  | 743 | } | 
|  | 744 | } else { | 
|  | 745 | SMSC_TRACE(HW, "configuring for no carrier"); | 
|  | 746 | /* Check global setting that LED1 | 
|  | 747 | * usage is 10/100 indicator */ | 
|  | 748 | pdata->gpio_setting = smsc911x_reg_read(pdata, | 
|  | 749 | GPIO_CFG); | 
|  | 750 | if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) | 
|  | 751 | && (!pdata->using_extphy)) { | 
|  | 752 | /* Force 10/100 LED off, after saving | 
|  | 753 | * orginal GPIO configuration */ | 
|  | 754 | pdata->gpio_orig_setting = pdata->gpio_setting; | 
|  | 755 |  | 
|  | 756 | pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; | 
|  | 757 | pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ | 
|  | 758 | | GPIO_CFG_GPIODIR0_ | 
|  | 759 | | GPIO_CFG_GPIOD0_); | 
|  | 760 | smsc911x_reg_write(pdata, GPIO_CFG, | 
|  | 761 | pdata->gpio_setting); | 
|  | 762 | } | 
|  | 763 | } | 
|  | 764 | pdata->last_carrier = carrier; | 
|  | 765 | } | 
|  | 766 | } | 
|  | 767 |  | 
|  | 768 | static int smsc911x_mii_probe(struct net_device *dev) | 
|  | 769 | { | 
|  | 770 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 771 | struct phy_device *phydev = NULL; | 
|  | 772 | int phy_addr; | 
|  | 773 |  | 
|  | 774 | /* find the first phy */ | 
|  | 775 | for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { | 
|  | 776 | if (pdata->mii_bus->phy_map[phy_addr]) { | 
|  | 777 | phydev = pdata->mii_bus->phy_map[phy_addr]; | 
|  | 778 | SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X", | 
|  | 779 | phy_addr, phydev->addr, phydev->phy_id); | 
|  | 780 | break; | 
|  | 781 | } | 
|  | 782 | } | 
|  | 783 |  | 
|  | 784 | if (!phydev) { | 
|  | 785 | pr_err("%s: no PHY found\n", dev->name); | 
|  | 786 | return -ENODEV; | 
|  | 787 | } | 
|  | 788 |  | 
| Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 789 | phydev = phy_connect(dev, dev_name(&phydev->dev), | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 790 | &smsc911x_phy_adjust_link, 0, pdata->config.phy_interface); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 791 |  | 
|  | 792 | if (IS_ERR(phydev)) { | 
|  | 793 | pr_err("%s: Could not attach to PHY\n", dev->name); | 
|  | 794 | return PTR_ERR(phydev); | 
|  | 795 | } | 
|  | 796 |  | 
|  | 797 | pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", | 
| Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 798 | dev->name, phydev->drv->name, | 
|  | 799 | dev_name(&phydev->dev), phydev->irq); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 800 |  | 
|  | 801 | /* mask with MAC supported features */ | 
|  | 802 | phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | | 
|  | 803 | SUPPORTED_Asym_Pause); | 
|  | 804 | phydev->advertising = phydev->supported; | 
|  | 805 |  | 
|  | 806 | pdata->phy_dev = phydev; | 
|  | 807 | pdata->last_duplex = -1; | 
|  | 808 | pdata->last_carrier = -1; | 
|  | 809 |  | 
|  | 810 | #ifdef USE_PHY_WORK_AROUND | 
|  | 811 | if (smsc911x_phy_loopbacktest(dev) < 0) { | 
|  | 812 | SMSC_WARNING(HW, "Failed Loop Back Test"); | 
|  | 813 | return -ENODEV; | 
|  | 814 | } | 
|  | 815 | SMSC_TRACE(HW, "Passed Loop Back Test"); | 
|  | 816 | #endif				/* USE_PHY_WORK_AROUND */ | 
|  | 817 |  | 
|  | 818 | SMSC_TRACE(HW, "phy initialised succesfully"); | 
|  | 819 | return 0; | 
|  | 820 | } | 
|  | 821 |  | 
|  | 822 | static int __devinit smsc911x_mii_init(struct platform_device *pdev, | 
|  | 823 | struct net_device *dev) | 
|  | 824 | { | 
|  | 825 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 826 | int err = -ENXIO, i; | 
|  | 827 |  | 
|  | 828 | pdata->mii_bus = mdiobus_alloc(); | 
|  | 829 | if (!pdata->mii_bus) { | 
|  | 830 | err = -ENOMEM; | 
|  | 831 | goto err_out_1; | 
|  | 832 | } | 
|  | 833 |  | 
|  | 834 | pdata->mii_bus->name = SMSC_MDIONAME; | 
|  | 835 | snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); | 
|  | 836 | pdata->mii_bus->priv = pdata; | 
|  | 837 | pdata->mii_bus->read = smsc911x_mii_read; | 
|  | 838 | pdata->mii_bus->write = smsc911x_mii_write; | 
|  | 839 | pdata->mii_bus->irq = pdata->phy_irq; | 
|  | 840 | for (i = 0; i < PHY_MAX_ADDR; ++i) | 
|  | 841 | pdata->mii_bus->irq[i] = PHY_POLL; | 
|  | 842 |  | 
|  | 843 | pdata->mii_bus->parent = &pdev->dev; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 844 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 845 | switch (pdata->idrev & 0xFFFF0000) { | 
|  | 846 | case 0x01170000: | 
|  | 847 | case 0x01150000: | 
|  | 848 | case 0x117A0000: | 
|  | 849 | case 0x115A0000: | 
|  | 850 | /* External PHY supported, try to autodetect */ | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 851 | smsc911x_phy_initialise_external(pdata); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 852 | break; | 
|  | 853 | default: | 
|  | 854 | SMSC_TRACE(HW, "External PHY is not supported, " | 
|  | 855 | "using internal PHY"); | 
| Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 856 | pdata->using_extphy = 0; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 857 | break; | 
|  | 858 | } | 
|  | 859 |  | 
|  | 860 | if (!pdata->using_extphy) { | 
|  | 861 | /* Mask all PHYs except ID 1 (internal) */ | 
|  | 862 | pdata->mii_bus->phy_mask = ~(1 << 1); | 
|  | 863 | } | 
|  | 864 |  | 
|  | 865 | if (mdiobus_register(pdata->mii_bus)) { | 
|  | 866 | SMSC_WARNING(PROBE, "Error registering mii bus"); | 
|  | 867 | goto err_out_free_bus_2; | 
|  | 868 | } | 
|  | 869 |  | 
|  | 870 | if (smsc911x_mii_probe(dev) < 0) { | 
|  | 871 | SMSC_WARNING(PROBE, "Error registering mii bus"); | 
|  | 872 | goto err_out_unregister_bus_3; | 
|  | 873 | } | 
|  | 874 |  | 
|  | 875 | return 0; | 
|  | 876 |  | 
|  | 877 | err_out_unregister_bus_3: | 
|  | 878 | mdiobus_unregister(pdata->mii_bus); | 
|  | 879 | err_out_free_bus_2: | 
|  | 880 | mdiobus_free(pdata->mii_bus); | 
|  | 881 | err_out_1: | 
|  | 882 | return err; | 
|  | 883 | } | 
|  | 884 |  | 
|  | 885 | /* Gets the number of tx statuses in the fifo */ | 
|  | 886 | static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) | 
|  | 887 | { | 
|  | 888 | return (smsc911x_reg_read(pdata, TX_FIFO_INF) | 
|  | 889 | & TX_FIFO_INF_TSUSED_) >> 16; | 
|  | 890 | } | 
|  | 891 |  | 
|  | 892 | /* Reads tx statuses and increments counters where necessary */ | 
|  | 893 | static void smsc911x_tx_update_txcounters(struct net_device *dev) | 
|  | 894 | { | 
|  | 895 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 896 | unsigned int tx_stat; | 
|  | 897 |  | 
|  | 898 | while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { | 
|  | 899 | if (unlikely(tx_stat & 0x80000000)) { | 
|  | 900 | /* In this driver the packet tag is used as the packet | 
|  | 901 | * length. Since a packet length can never reach the | 
|  | 902 | * size of 0x8000, this bit is reserved. It is worth | 
|  | 903 | * noting that the "reserved bit" in the warning above | 
|  | 904 | * does not reference a hardware defined reserved bit | 
|  | 905 | * but rather a driver defined one. | 
|  | 906 | */ | 
|  | 907 | SMSC_WARNING(HW, | 
|  | 908 | "Packet tag reserved bit is high"); | 
|  | 909 | } else { | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 910 | if (unlikely(tx_stat & TX_STS_ES_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 911 | dev->stats.tx_errors++; | 
|  | 912 | } else { | 
|  | 913 | dev->stats.tx_packets++; | 
|  | 914 | dev->stats.tx_bytes += (tx_stat >> 16); | 
|  | 915 | } | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 916 | if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 917 | dev->stats.collisions += 16; | 
|  | 918 | dev->stats.tx_aborted_errors += 1; | 
|  | 919 | } else { | 
|  | 920 | dev->stats.collisions += | 
|  | 921 | ((tx_stat >> 3) & 0xF); | 
|  | 922 | } | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 923 | if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 924 | dev->stats.tx_carrier_errors += 1; | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 925 | if (unlikely(tx_stat & TX_STS_LATE_COL_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 926 | dev->stats.collisions++; | 
|  | 927 | dev->stats.tx_aborted_errors++; | 
|  | 928 | } | 
|  | 929 | } | 
|  | 930 | } | 
|  | 931 | } | 
|  | 932 |  | 
|  | 933 | /* Increments the Rx error counters */ | 
|  | 934 | static void | 
|  | 935 | smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) | 
|  | 936 | { | 
|  | 937 | int crc_err = 0; | 
|  | 938 |  | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 939 | if (unlikely(rxstat & RX_STS_ES_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 940 | dev->stats.rx_errors++; | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 941 | if (unlikely(rxstat & RX_STS_CRC_ERR_)) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 942 | dev->stats.rx_crc_errors++; | 
|  | 943 | crc_err = 1; | 
|  | 944 | } | 
|  | 945 | } | 
|  | 946 | if (likely(!crc_err)) { | 
| Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 947 | if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && | 
|  | 948 | (rxstat & RX_STS_LENGTH_ERR_))) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 949 | dev->stats.rx_length_errors++; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 950 | if (rxstat & RX_STS_MCAST_) | 
|  | 951 | dev->stats.multicast++; | 
|  | 952 | } | 
|  | 953 | } | 
|  | 954 |  | 
|  | 955 | /* Quickly dumps bad packets */ | 
|  | 956 | static void | 
|  | 957 | smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) | 
|  | 958 | { | 
|  | 959 | unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; | 
|  | 960 |  | 
|  | 961 | if (likely(pktwords >= 4)) { | 
|  | 962 | unsigned int timeout = 500; | 
|  | 963 | unsigned int val; | 
|  | 964 | smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); | 
|  | 965 | do { | 
|  | 966 | udelay(1); | 
|  | 967 | val = smsc911x_reg_read(pdata, RX_DP_CTRL); | 
| Steve Glendinning | 8dacd54 | 2009-03-04 07:33:24 +0000 | [diff] [blame] | 968 | } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 969 |  | 
|  | 970 | if (unlikely(timeout == 0)) | 
|  | 971 | SMSC_WARNING(HW, "Timed out waiting for " | 
|  | 972 | "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); | 
|  | 973 | } else { | 
|  | 974 | unsigned int temp; | 
|  | 975 | while (pktwords--) | 
|  | 976 | temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); | 
|  | 977 | } | 
|  | 978 | } | 
|  | 979 |  | 
|  | 980 | /* NAPI poll function */ | 
|  | 981 | static int smsc911x_poll(struct napi_struct *napi, int budget) | 
|  | 982 | { | 
|  | 983 | struct smsc911x_data *pdata = | 
|  | 984 | container_of(napi, struct smsc911x_data, napi); | 
|  | 985 | struct net_device *dev = pdata->dev; | 
|  | 986 | int npackets = 0; | 
|  | 987 |  | 
|  | 988 | while (likely(netif_running(dev)) && (npackets < budget)) { | 
|  | 989 | unsigned int pktlength; | 
|  | 990 | unsigned int pktwords; | 
|  | 991 | struct sk_buff *skb; | 
|  | 992 | unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); | 
|  | 993 |  | 
|  | 994 | if (!rxstat) { | 
|  | 995 | unsigned int temp; | 
|  | 996 | /* We processed all packets available.  Tell NAPI it can | 
|  | 997 | * stop polling then re-enable rx interrupts */ | 
|  | 998 | smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 999 | napi_complete(napi); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1000 | temp = smsc911x_reg_read(pdata, INT_EN); | 
|  | 1001 | temp |= INT_EN_RSFL_EN_; | 
|  | 1002 | smsc911x_reg_write(pdata, INT_EN, temp); | 
|  | 1003 | break; | 
|  | 1004 | } | 
|  | 1005 |  | 
|  | 1006 | /* Count packet for NAPI scheduling, even if it has an error. | 
|  | 1007 | * Error packets still require cycles to discard */ | 
|  | 1008 | npackets++; | 
|  | 1009 |  | 
|  | 1010 | pktlength = ((rxstat & 0x3FFF0000) >> 16); | 
|  | 1011 | pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; | 
|  | 1012 | smsc911x_rx_counterrors(dev, rxstat); | 
|  | 1013 |  | 
|  | 1014 | if (unlikely(rxstat & RX_STS_ES_)) { | 
|  | 1015 | SMSC_WARNING(RX_ERR, | 
|  | 1016 | "Discarding packet with error bit set"); | 
|  | 1017 | /* Packet has an error, discard it and continue with | 
|  | 1018 | * the next */ | 
|  | 1019 | smsc911x_rx_fastforward(pdata, pktwords); | 
|  | 1020 | dev->stats.rx_dropped++; | 
|  | 1021 | continue; | 
|  | 1022 | } | 
|  | 1023 |  | 
|  | 1024 | skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); | 
|  | 1025 | if (unlikely(!skb)) { | 
|  | 1026 | SMSC_WARNING(RX_ERR, | 
|  | 1027 | "Unable to allocate skb for rx packet"); | 
|  | 1028 | /* Drop the packet and stop this polling iteration */ | 
|  | 1029 | smsc911x_rx_fastforward(pdata, pktwords); | 
|  | 1030 | dev->stats.rx_dropped++; | 
|  | 1031 | break; | 
|  | 1032 | } | 
|  | 1033 |  | 
|  | 1034 | skb->data = skb->head; | 
|  | 1035 | skb_reset_tail_pointer(skb); | 
|  | 1036 |  | 
|  | 1037 | /* Align IP on 16B boundary */ | 
|  | 1038 | skb_reserve(skb, NET_IP_ALIGN); | 
|  | 1039 | skb_put(skb, pktlength - 4); | 
|  | 1040 | smsc911x_rx_readfifo(pdata, (unsigned int *)skb->head, | 
|  | 1041 | pktwords); | 
|  | 1042 | skb->protocol = eth_type_trans(skb, dev); | 
|  | 1043 | skb->ip_summed = CHECKSUM_NONE; | 
|  | 1044 | netif_receive_skb(skb); | 
|  | 1045 |  | 
|  | 1046 | /* Update counters */ | 
|  | 1047 | dev->stats.rx_packets++; | 
|  | 1048 | dev->stats.rx_bytes += (pktlength - 4); | 
|  | 1049 | dev->last_rx = jiffies; | 
|  | 1050 | } | 
|  | 1051 |  | 
|  | 1052 | /* Return total received packets */ | 
|  | 1053 | return npackets; | 
|  | 1054 | } | 
|  | 1055 |  | 
|  | 1056 | /* Returns hash bit number for given MAC address | 
|  | 1057 | * Example: | 
|  | 1058 | * 01 00 5E 00 00 01 -> returns bit number 31 */ | 
|  | 1059 | static unsigned int smsc911x_hash(char addr[ETH_ALEN]) | 
|  | 1060 | { | 
|  | 1061 | return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; | 
|  | 1062 | } | 
|  | 1063 |  | 
|  | 1064 | static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) | 
|  | 1065 | { | 
|  | 1066 | /* Performs the multicast & mac_cr update.  This is called when | 
|  | 1067 | * safe on the current hardware, and with the mac_lock held */ | 
|  | 1068 | unsigned int mac_cr; | 
|  | 1069 |  | 
|  | 1070 | SMSC_ASSERT_MAC_LOCK(pdata); | 
|  | 1071 |  | 
|  | 1072 | mac_cr = smsc911x_mac_read(pdata, MAC_CR); | 
|  | 1073 | mac_cr |= pdata->set_bits_mask; | 
|  | 1074 | mac_cr &= ~(pdata->clear_bits_mask); | 
|  | 1075 | smsc911x_mac_write(pdata, MAC_CR, mac_cr); | 
|  | 1076 | smsc911x_mac_write(pdata, HASHH, pdata->hashhi); | 
|  | 1077 | smsc911x_mac_write(pdata, HASHL, pdata->hashlo); | 
|  | 1078 | SMSC_TRACE(HW, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", | 
|  | 1079 | mac_cr, pdata->hashhi, pdata->hashlo); | 
|  | 1080 | } | 
|  | 1081 |  | 
|  | 1082 | static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) | 
|  | 1083 | { | 
|  | 1084 | unsigned int mac_cr; | 
|  | 1085 |  | 
|  | 1086 | /* This function is only called for older LAN911x devices | 
|  | 1087 | * (revA or revB), where MAC_CR, HASHH and HASHL should not | 
|  | 1088 | * be modified during Rx - newer devices immediately update the | 
|  | 1089 | * registers. | 
|  | 1090 | * | 
|  | 1091 | * This is called from interrupt context */ | 
|  | 1092 |  | 
|  | 1093 | spin_lock(&pdata->mac_lock); | 
|  | 1094 |  | 
|  | 1095 | /* Check Rx has stopped */ | 
|  | 1096 | if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) | 
|  | 1097 | SMSC_WARNING(DRV, "Rx not stopped"); | 
|  | 1098 |  | 
|  | 1099 | /* Perform the update - safe to do now Rx has stopped */ | 
|  | 1100 | smsc911x_rx_multicast_update(pdata); | 
|  | 1101 |  | 
|  | 1102 | /* Re-enable Rx */ | 
|  | 1103 | mac_cr = smsc911x_mac_read(pdata, MAC_CR); | 
|  | 1104 | mac_cr |= MAC_CR_RXEN_; | 
|  | 1105 | smsc911x_mac_write(pdata, MAC_CR, mac_cr); | 
|  | 1106 |  | 
|  | 1107 | pdata->multicast_update_pending = 0; | 
|  | 1108 |  | 
|  | 1109 | spin_unlock(&pdata->mac_lock); | 
|  | 1110 | } | 
|  | 1111 |  | 
|  | 1112 | static int smsc911x_soft_reset(struct smsc911x_data *pdata) | 
|  | 1113 | { | 
|  | 1114 | unsigned int timeout; | 
|  | 1115 | unsigned int temp; | 
|  | 1116 |  | 
|  | 1117 | /* Reset the LAN911x */ | 
|  | 1118 | smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); | 
|  | 1119 | timeout = 10; | 
|  | 1120 | do { | 
|  | 1121 | udelay(10); | 
|  | 1122 | temp = smsc911x_reg_read(pdata, HW_CFG); | 
|  | 1123 | } while ((--timeout) && (temp & HW_CFG_SRST_)); | 
|  | 1124 |  | 
|  | 1125 | if (unlikely(temp & HW_CFG_SRST_)) { | 
|  | 1126 | SMSC_WARNING(DRV, "Failed to complete reset"); | 
|  | 1127 | return -EIO; | 
|  | 1128 | } | 
|  | 1129 | return 0; | 
|  | 1130 | } | 
|  | 1131 |  | 
|  | 1132 | /* Sets the device MAC address to dev_addr, called with mac_lock held */ | 
|  | 1133 | static void | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1134 | smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1135 | { | 
|  | 1136 | u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; | 
|  | 1137 | u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | | 
|  | 1138 | (dev_addr[1] << 8) | dev_addr[0]; | 
|  | 1139 |  | 
|  | 1140 | SMSC_ASSERT_MAC_LOCK(pdata); | 
|  | 1141 |  | 
|  | 1142 | smsc911x_mac_write(pdata, ADDRH, mac_high16); | 
|  | 1143 | smsc911x_mac_write(pdata, ADDRL, mac_low32); | 
|  | 1144 | } | 
|  | 1145 |  | 
|  | 1146 | static int smsc911x_open(struct net_device *dev) | 
|  | 1147 | { | 
|  | 1148 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1149 | unsigned int timeout; | 
|  | 1150 | unsigned int temp; | 
|  | 1151 | unsigned int intcfg; | 
|  | 1152 |  | 
|  | 1153 | /* if the phy is not yet registered, retry later*/ | 
|  | 1154 | if (!pdata->phy_dev) { | 
|  | 1155 | SMSC_WARNING(HW, "phy_dev is NULL"); | 
|  | 1156 | return -EAGAIN; | 
|  | 1157 | } | 
|  | 1158 |  | 
|  | 1159 | if (!is_valid_ether_addr(dev->dev_addr)) { | 
|  | 1160 | SMSC_WARNING(HW, "dev_addr is not a valid MAC address"); | 
|  | 1161 | return -EADDRNOTAVAIL; | 
|  | 1162 | } | 
|  | 1163 |  | 
|  | 1164 | /* Reset the LAN911x */ | 
|  | 1165 | if (smsc911x_soft_reset(pdata)) { | 
|  | 1166 | SMSC_WARNING(HW, "soft reset failed"); | 
|  | 1167 | return -EIO; | 
|  | 1168 | } | 
|  | 1169 |  | 
|  | 1170 | smsc911x_reg_write(pdata, HW_CFG, 0x00050000); | 
|  | 1171 | smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); | 
|  | 1172 |  | 
|  | 1173 | /* Make sure EEPROM has finished loading before setting GPIO_CFG */ | 
|  | 1174 | timeout = 50; | 
| Steve Glendinning | f7efb6c | 2009-03-04 07:33:25 +0000 | [diff] [blame] | 1175 | while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && | 
|  | 1176 | --timeout) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1177 | udelay(10); | 
|  | 1178 | } | 
|  | 1179 |  | 
|  | 1180 | if (unlikely(timeout == 0)) | 
|  | 1181 | SMSC_WARNING(IFUP, | 
|  | 1182 | "Timed out waiting for EEPROM busy bit to clear"); | 
|  | 1183 |  | 
|  | 1184 | smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000); | 
|  | 1185 |  | 
|  | 1186 | /* The soft reset above cleared the device's MAC address, | 
|  | 1187 | * restore it from local copy (set in probe) */ | 
|  | 1188 | spin_lock_irq(&pdata->mac_lock); | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1189 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1190 | spin_unlock_irq(&pdata->mac_lock); | 
|  | 1191 |  | 
|  | 1192 | /* Initialise irqs, but leave all sources disabled */ | 
|  | 1193 | smsc911x_reg_write(pdata, INT_EN, 0); | 
|  | 1194 | smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); | 
|  | 1195 |  | 
|  | 1196 | /* Set interrupt deassertion to 100uS */ | 
|  | 1197 | intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); | 
|  | 1198 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1199 | if (pdata->config.irq_polarity) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1200 | SMSC_TRACE(IFUP, "irq polarity: active high"); | 
|  | 1201 | intcfg |= INT_CFG_IRQ_POL_; | 
|  | 1202 | } else { | 
|  | 1203 | SMSC_TRACE(IFUP, "irq polarity: active low"); | 
|  | 1204 | } | 
|  | 1205 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1206 | if (pdata->config.irq_type) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1207 | SMSC_TRACE(IFUP, "irq type: push-pull"); | 
|  | 1208 | intcfg |= INT_CFG_IRQ_TYPE_; | 
|  | 1209 | } else { | 
|  | 1210 | SMSC_TRACE(IFUP, "irq type: open drain"); | 
|  | 1211 | } | 
|  | 1212 |  | 
|  | 1213 | smsc911x_reg_write(pdata, INT_CFG, intcfg); | 
|  | 1214 |  | 
|  | 1215 | SMSC_TRACE(IFUP, "Testing irq handler using IRQ %d", dev->irq); | 
|  | 1216 | pdata->software_irq_signal = 0; | 
|  | 1217 | smp_wmb(); | 
|  | 1218 |  | 
|  | 1219 | temp = smsc911x_reg_read(pdata, INT_EN); | 
|  | 1220 | temp |= INT_EN_SW_INT_EN_; | 
|  | 1221 | smsc911x_reg_write(pdata, INT_EN, temp); | 
|  | 1222 |  | 
|  | 1223 | timeout = 1000; | 
|  | 1224 | while (timeout--) { | 
|  | 1225 | if (pdata->software_irq_signal) | 
|  | 1226 | break; | 
|  | 1227 | msleep(1); | 
|  | 1228 | } | 
|  | 1229 |  | 
|  | 1230 | if (!pdata->software_irq_signal) { | 
|  | 1231 | dev_warn(&dev->dev, "ISR failed signaling test (IRQ %d)\n", | 
|  | 1232 | dev->irq); | 
|  | 1233 | return -ENODEV; | 
|  | 1234 | } | 
|  | 1235 | SMSC_TRACE(IFUP, "IRQ handler passed test using IRQ %d", dev->irq); | 
|  | 1236 |  | 
|  | 1237 | dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", | 
|  | 1238 | (unsigned long)pdata->ioaddr, dev->irq); | 
|  | 1239 |  | 
| Steve Glendinning | 44c1d6f | 2009-03-18 23:37:18 -0700 | [diff] [blame] | 1240 | /* Reset the last known duplex and carrier */ | 
|  | 1241 | pdata->last_duplex = -1; | 
|  | 1242 | pdata->last_carrier = -1; | 
|  | 1243 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1244 | /* Bring the PHY up */ | 
|  | 1245 | phy_start(pdata->phy_dev); | 
|  | 1246 |  | 
|  | 1247 | temp = smsc911x_reg_read(pdata, HW_CFG); | 
|  | 1248 | /* Preserve TX FIFO size and external PHY configuration */ | 
|  | 1249 | temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); | 
|  | 1250 | temp |= HW_CFG_SF_; | 
|  | 1251 | smsc911x_reg_write(pdata, HW_CFG, temp); | 
|  | 1252 |  | 
|  | 1253 | temp = smsc911x_reg_read(pdata, FIFO_INT); | 
|  | 1254 | temp |= FIFO_INT_TX_AVAIL_LEVEL_; | 
|  | 1255 | temp &= ~(FIFO_INT_RX_STS_LEVEL_); | 
|  | 1256 | smsc911x_reg_write(pdata, FIFO_INT, temp); | 
|  | 1257 |  | 
|  | 1258 | /* set RX Data offset to 2 bytes for alignment */ | 
|  | 1259 | smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); | 
|  | 1260 |  | 
|  | 1261 | /* enable NAPI polling before enabling RX interrupts */ | 
|  | 1262 | napi_enable(&pdata->napi); | 
|  | 1263 |  | 
|  | 1264 | temp = smsc911x_reg_read(pdata, INT_EN); | 
| Steve Glendinning | 1373c0f | 2009-01-26 21:33:16 -0800 | [diff] [blame] | 1265 | temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1266 | smsc911x_reg_write(pdata, INT_EN, temp); | 
|  | 1267 |  | 
|  | 1268 | spin_lock_irq(&pdata->mac_lock); | 
|  | 1269 | temp = smsc911x_mac_read(pdata, MAC_CR); | 
|  | 1270 | temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); | 
|  | 1271 | smsc911x_mac_write(pdata, MAC_CR, temp); | 
|  | 1272 | spin_unlock_irq(&pdata->mac_lock); | 
|  | 1273 |  | 
|  | 1274 | smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); | 
|  | 1275 |  | 
|  | 1276 | netif_start_queue(dev); | 
|  | 1277 | return 0; | 
|  | 1278 | } | 
|  | 1279 |  | 
|  | 1280 | /* Entry point for stopping the interface */ | 
|  | 1281 | static int smsc911x_stop(struct net_device *dev) | 
|  | 1282 | { | 
|  | 1283 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1284 | unsigned int temp; | 
|  | 1285 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1286 | /* Disable all device interrupts */ | 
|  | 1287 | temp = smsc911x_reg_read(pdata, INT_CFG); | 
|  | 1288 | temp &= ~INT_CFG_IRQ_EN_; | 
|  | 1289 | smsc911x_reg_write(pdata, INT_CFG, temp); | 
|  | 1290 |  | 
|  | 1291 | /* Stop Tx and Rx polling */ | 
|  | 1292 | netif_stop_queue(dev); | 
|  | 1293 | napi_disable(&pdata->napi); | 
|  | 1294 |  | 
|  | 1295 | /* At this point all Rx and Tx activity is stopped */ | 
|  | 1296 | dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); | 
|  | 1297 | smsc911x_tx_update_txcounters(dev); | 
|  | 1298 |  | 
|  | 1299 | /* Bring the PHY down */ | 
| Steve Glendinning | dd04519 | 2008-12-25 16:40:19 -0800 | [diff] [blame] | 1300 | if (pdata->phy_dev) | 
|  | 1301 | phy_stop(pdata->phy_dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1302 |  | 
|  | 1303 | SMSC_TRACE(IFDOWN, "Interface stopped"); | 
|  | 1304 | return 0; | 
|  | 1305 | } | 
|  | 1306 |  | 
|  | 1307 | /* Entry point for transmitting a packet */ | 
|  | 1308 | static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | 1309 | { | 
|  | 1310 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1311 | unsigned int freespace; | 
|  | 1312 | unsigned int tx_cmd_a; | 
|  | 1313 | unsigned int tx_cmd_b; | 
|  | 1314 | unsigned int temp; | 
|  | 1315 | u32 wrsz; | 
|  | 1316 | ulong bufp; | 
|  | 1317 |  | 
|  | 1318 | freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; | 
|  | 1319 |  | 
|  | 1320 | if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) | 
|  | 1321 | SMSC_WARNING(TX_ERR, | 
|  | 1322 | "Tx data fifo low, space available: %d", freespace); | 
|  | 1323 |  | 
|  | 1324 | /* Word alignment adjustment */ | 
|  | 1325 | tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; | 
|  | 1326 | tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; | 
|  | 1327 | tx_cmd_a |= (unsigned int)skb->len; | 
|  | 1328 |  | 
|  | 1329 | tx_cmd_b = ((unsigned int)skb->len) << 16; | 
|  | 1330 | tx_cmd_b |= (unsigned int)skb->len; | 
|  | 1331 |  | 
|  | 1332 | smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); | 
|  | 1333 | smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); | 
|  | 1334 |  | 
|  | 1335 | bufp = (ulong)skb->data & (~0x3); | 
|  | 1336 | wrsz = (u32)skb->len + 3; | 
|  | 1337 | wrsz += (u32)((ulong)skb->data & 0x3); | 
|  | 1338 | wrsz >>= 2; | 
|  | 1339 |  | 
|  | 1340 | smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz); | 
|  | 1341 | freespace -= (skb->len + 32); | 
|  | 1342 | dev_kfree_skb(skb); | 
|  | 1343 | dev->trans_start = jiffies; | 
|  | 1344 |  | 
|  | 1345 | if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) | 
|  | 1346 | smsc911x_tx_update_txcounters(dev); | 
|  | 1347 |  | 
|  | 1348 | if (freespace < TX_FIFO_LOW_THRESHOLD) { | 
|  | 1349 | netif_stop_queue(dev); | 
|  | 1350 | temp = smsc911x_reg_read(pdata, FIFO_INT); | 
|  | 1351 | temp &= 0x00FFFFFF; | 
|  | 1352 | temp |= 0x32000000; | 
|  | 1353 | smsc911x_reg_write(pdata, FIFO_INT, temp); | 
|  | 1354 | } | 
|  | 1355 |  | 
|  | 1356 | return NETDEV_TX_OK; | 
|  | 1357 | } | 
|  | 1358 |  | 
|  | 1359 | /* Entry point for getting status counters */ | 
|  | 1360 | static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) | 
|  | 1361 | { | 
|  | 1362 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1363 | smsc911x_tx_update_txcounters(dev); | 
|  | 1364 | dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); | 
|  | 1365 | return &dev->stats; | 
|  | 1366 | } | 
|  | 1367 |  | 
|  | 1368 | /* Entry point for setting addressing modes */ | 
|  | 1369 | static void smsc911x_set_multicast_list(struct net_device *dev) | 
|  | 1370 | { | 
|  | 1371 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1372 | unsigned long flags; | 
|  | 1373 |  | 
|  | 1374 | if (dev->flags & IFF_PROMISC) { | 
|  | 1375 | /* Enabling promiscuous mode */ | 
|  | 1376 | pdata->set_bits_mask = MAC_CR_PRMS_; | 
|  | 1377 | pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); | 
|  | 1378 | pdata->hashhi = 0; | 
|  | 1379 | pdata->hashlo = 0; | 
|  | 1380 | } else if (dev->flags & IFF_ALLMULTI) { | 
|  | 1381 | /* Enabling all multicast mode */ | 
|  | 1382 | pdata->set_bits_mask = MAC_CR_MCPAS_; | 
|  | 1383 | pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); | 
|  | 1384 | pdata->hashhi = 0; | 
|  | 1385 | pdata->hashlo = 0; | 
|  | 1386 | } else if (dev->mc_count > 0) { | 
|  | 1387 | /* Enabling specific multicast addresses */ | 
|  | 1388 | unsigned int hash_high = 0; | 
|  | 1389 | unsigned int hash_low = 0; | 
|  | 1390 | unsigned int count = 0; | 
|  | 1391 | struct dev_mc_list *mc_list = dev->mc_list; | 
|  | 1392 |  | 
|  | 1393 | pdata->set_bits_mask = MAC_CR_HPFILT_; | 
|  | 1394 | pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); | 
|  | 1395 |  | 
|  | 1396 | while (mc_list) { | 
|  | 1397 | count++; | 
|  | 1398 | if ((mc_list->dmi_addrlen) == ETH_ALEN) { | 
|  | 1399 | unsigned int bitnum = | 
|  | 1400 | smsc911x_hash(mc_list->dmi_addr); | 
|  | 1401 | unsigned int mask = 0x01 << (bitnum & 0x1F); | 
|  | 1402 | if (bitnum & 0x20) | 
|  | 1403 | hash_high |= mask; | 
|  | 1404 | else | 
|  | 1405 | hash_low |= mask; | 
|  | 1406 | } else { | 
|  | 1407 | SMSC_WARNING(DRV, "dmi_addrlen != 6"); | 
|  | 1408 | } | 
|  | 1409 | mc_list = mc_list->next; | 
|  | 1410 | } | 
|  | 1411 | if (count != (unsigned int)dev->mc_count) | 
|  | 1412 | SMSC_WARNING(DRV, "mc_count != dev->mc_count"); | 
|  | 1413 |  | 
|  | 1414 | pdata->hashhi = hash_high; | 
|  | 1415 | pdata->hashlo = hash_low; | 
|  | 1416 | } else { | 
|  | 1417 | /* Enabling local MAC address only */ | 
|  | 1418 | pdata->set_bits_mask = 0; | 
|  | 1419 | pdata->clear_bits_mask = | 
|  | 1420 | (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); | 
|  | 1421 | pdata->hashhi = 0; | 
|  | 1422 | pdata->hashlo = 0; | 
|  | 1423 | } | 
|  | 1424 |  | 
|  | 1425 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 1426 |  | 
|  | 1427 | if (pdata->generation <= 1) { | 
|  | 1428 | /* Older hardware revision - cannot change these flags while | 
|  | 1429 | * receiving data */ | 
|  | 1430 | if (!pdata->multicast_update_pending) { | 
|  | 1431 | unsigned int temp; | 
|  | 1432 | SMSC_TRACE(HW, "scheduling mcast update"); | 
|  | 1433 | pdata->multicast_update_pending = 1; | 
|  | 1434 |  | 
|  | 1435 | /* Request the hardware to stop, then perform the | 
|  | 1436 | * update when we get an RX_STOP interrupt */ | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1437 | temp = smsc911x_mac_read(pdata, MAC_CR); | 
|  | 1438 | temp &= ~(MAC_CR_RXEN_); | 
|  | 1439 | smsc911x_mac_write(pdata, MAC_CR, temp); | 
|  | 1440 | } else { | 
|  | 1441 | /* There is another update pending, this should now | 
|  | 1442 | * use the newer values */ | 
|  | 1443 | } | 
|  | 1444 | } else { | 
|  | 1445 | /* Newer hardware revision - can write immediately */ | 
|  | 1446 | smsc911x_rx_multicast_update(pdata); | 
|  | 1447 | } | 
|  | 1448 |  | 
|  | 1449 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 1450 | } | 
|  | 1451 |  | 
|  | 1452 | static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) | 
|  | 1453 | { | 
|  | 1454 | struct net_device *dev = dev_id; | 
|  | 1455 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1456 | u32 intsts = smsc911x_reg_read(pdata, INT_STS); | 
|  | 1457 | u32 inten = smsc911x_reg_read(pdata, INT_EN); | 
|  | 1458 | int serviced = IRQ_NONE; | 
|  | 1459 | u32 temp; | 
|  | 1460 |  | 
|  | 1461 | if (unlikely(intsts & inten & INT_STS_SW_INT_)) { | 
|  | 1462 | temp = smsc911x_reg_read(pdata, INT_EN); | 
|  | 1463 | temp &= (~INT_EN_SW_INT_EN_); | 
|  | 1464 | smsc911x_reg_write(pdata, INT_EN, temp); | 
|  | 1465 | smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); | 
|  | 1466 | pdata->software_irq_signal = 1; | 
|  | 1467 | smp_wmb(); | 
|  | 1468 | serviced = IRQ_HANDLED; | 
|  | 1469 | } | 
|  | 1470 |  | 
|  | 1471 | if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { | 
|  | 1472 | /* Called when there is a multicast update scheduled and | 
|  | 1473 | * it is now safe to complete the update */ | 
|  | 1474 | SMSC_TRACE(INTR, "RX Stop interrupt"); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1475 | smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); | 
| Steve Glendinning | 1373c0f | 2009-01-26 21:33:16 -0800 | [diff] [blame] | 1476 | if (pdata->multicast_update_pending) | 
|  | 1477 | smsc911x_rx_multicast_update_workaround(pdata); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1478 | serviced = IRQ_HANDLED; | 
|  | 1479 | } | 
|  | 1480 |  | 
|  | 1481 | if (intsts & inten & INT_STS_TDFA_) { | 
|  | 1482 | temp = smsc911x_reg_read(pdata, FIFO_INT); | 
|  | 1483 | temp |= FIFO_INT_TX_AVAIL_LEVEL_; | 
|  | 1484 | smsc911x_reg_write(pdata, FIFO_INT, temp); | 
|  | 1485 | smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); | 
|  | 1486 | netif_wake_queue(dev); | 
|  | 1487 | serviced = IRQ_HANDLED; | 
|  | 1488 | } | 
|  | 1489 |  | 
|  | 1490 | if (unlikely(intsts & inten & INT_STS_RXE_)) { | 
|  | 1491 | SMSC_TRACE(INTR, "RX Error interrupt"); | 
|  | 1492 | smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); | 
|  | 1493 | serviced = IRQ_HANDLED; | 
|  | 1494 | } | 
|  | 1495 |  | 
|  | 1496 | if (likely(intsts & inten & INT_STS_RSFL_)) { | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1497 | if (likely(napi_schedule_prep(&pdata->napi))) { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1498 | /* Disable Rx interrupts */ | 
|  | 1499 | temp = smsc911x_reg_read(pdata, INT_EN); | 
|  | 1500 | temp &= (~INT_EN_RSFL_EN_); | 
|  | 1501 | smsc911x_reg_write(pdata, INT_EN, temp); | 
|  | 1502 | /* Schedule a NAPI poll */ | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1503 | __napi_schedule(&pdata->napi); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1504 | } else { | 
|  | 1505 | SMSC_WARNING(RX_ERR, | 
| Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1506 | "napi_schedule_prep failed"); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1507 | } | 
|  | 1508 | serviced = IRQ_HANDLED; | 
|  | 1509 | } | 
|  | 1510 |  | 
|  | 1511 | return serviced; | 
|  | 1512 | } | 
|  | 1513 |  | 
|  | 1514 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
| Steve Glendinning | 1757ab2 | 2008-12-12 22:31:16 -0800 | [diff] [blame] | 1515 | static void smsc911x_poll_controller(struct net_device *dev) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1516 | { | 
|  | 1517 | disable_irq(dev->irq); | 
|  | 1518 | smsc911x_irqhandler(0, dev); | 
|  | 1519 | enable_irq(dev->irq); | 
|  | 1520 | } | 
|  | 1521 | #endif				/* CONFIG_NET_POLL_CONTROLLER */ | 
|  | 1522 |  | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1523 | static int smsc911x_set_mac_address(struct net_device *dev, void *p) | 
|  | 1524 | { | 
|  | 1525 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1526 | struct sockaddr *addr = p; | 
|  | 1527 |  | 
|  | 1528 | /* On older hardware revisions we cannot change the mac address | 
|  | 1529 | * registers while receiving data.  Newer devices can safely change | 
|  | 1530 | * this at any time. */ | 
|  | 1531 | if (pdata->generation <= 1 && netif_running(dev)) | 
|  | 1532 | return -EBUSY; | 
|  | 1533 |  | 
|  | 1534 | if (!is_valid_ether_addr(addr->sa_data)) | 
|  | 1535 | return -EADDRNOTAVAIL; | 
|  | 1536 |  | 
|  | 1537 | memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); | 
|  | 1538 |  | 
|  | 1539 | spin_lock_irq(&pdata->mac_lock); | 
|  | 1540 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
|  | 1541 | spin_unlock_irq(&pdata->mac_lock); | 
|  | 1542 |  | 
|  | 1543 | dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); | 
|  | 1544 |  | 
|  | 1545 | return 0; | 
|  | 1546 | } | 
|  | 1547 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1548 | /* Standard ioctls for mii-tool */ | 
|  | 1549 | static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | 
|  | 1550 | { | 
|  | 1551 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1552 |  | 
|  | 1553 | if (!netif_running(dev) || !pdata->phy_dev) | 
|  | 1554 | return -EINVAL; | 
|  | 1555 |  | 
|  | 1556 | return phy_mii_ioctl(pdata->phy_dev, if_mii(ifr), cmd); | 
|  | 1557 | } | 
|  | 1558 |  | 
|  | 1559 | static int | 
|  | 1560 | smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) | 
|  | 1561 | { | 
|  | 1562 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1563 |  | 
|  | 1564 | cmd->maxtxpkt = 1; | 
|  | 1565 | cmd->maxrxpkt = 1; | 
|  | 1566 | return phy_ethtool_gset(pdata->phy_dev, cmd); | 
|  | 1567 | } | 
|  | 1568 |  | 
|  | 1569 | static int | 
|  | 1570 | smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) | 
|  | 1571 | { | 
|  | 1572 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1573 |  | 
|  | 1574 | return phy_ethtool_sset(pdata->phy_dev, cmd); | 
|  | 1575 | } | 
|  | 1576 |  | 
|  | 1577 | static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, | 
|  | 1578 | struct ethtool_drvinfo *info) | 
|  | 1579 | { | 
|  | 1580 | strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); | 
|  | 1581 | strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); | 
| Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 1582 | strlcpy(info->bus_info, dev_name(dev->dev.parent), | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1583 | sizeof(info->bus_info)); | 
|  | 1584 | } | 
|  | 1585 |  | 
|  | 1586 | static int smsc911x_ethtool_nwayreset(struct net_device *dev) | 
|  | 1587 | { | 
|  | 1588 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1589 |  | 
|  | 1590 | return phy_start_aneg(pdata->phy_dev); | 
|  | 1591 | } | 
|  | 1592 |  | 
|  | 1593 | static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) | 
|  | 1594 | { | 
|  | 1595 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1596 | return pdata->msg_enable; | 
|  | 1597 | } | 
|  | 1598 |  | 
|  | 1599 | static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) | 
|  | 1600 | { | 
|  | 1601 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1602 | pdata->msg_enable = level; | 
|  | 1603 | } | 
|  | 1604 |  | 
|  | 1605 | static int smsc911x_ethtool_getregslen(struct net_device *dev) | 
|  | 1606 | { | 
|  | 1607 | return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * | 
|  | 1608 | sizeof(u32); | 
|  | 1609 | } | 
|  | 1610 |  | 
|  | 1611 | static void | 
|  | 1612 | smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, | 
|  | 1613 | void *buf) | 
|  | 1614 | { | 
|  | 1615 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1616 | struct phy_device *phy_dev = pdata->phy_dev; | 
|  | 1617 | unsigned long flags; | 
|  | 1618 | unsigned int i; | 
|  | 1619 | unsigned int j = 0; | 
|  | 1620 | u32 *data = buf; | 
|  | 1621 |  | 
|  | 1622 | regs->version = pdata->idrev; | 
|  | 1623 | for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) | 
|  | 1624 | data[j++] = smsc911x_reg_read(pdata, i); | 
|  | 1625 |  | 
|  | 1626 | for (i = MAC_CR; i <= WUCSR; i++) { | 
|  | 1627 | spin_lock_irqsave(&pdata->mac_lock, flags); | 
|  | 1628 | data[j++] = smsc911x_mac_read(pdata, i); | 
|  | 1629 | spin_unlock_irqrestore(&pdata->mac_lock, flags); | 
|  | 1630 | } | 
|  | 1631 |  | 
|  | 1632 | for (i = 0; i <= 31; i++) | 
|  | 1633 | data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); | 
|  | 1634 | } | 
|  | 1635 |  | 
|  | 1636 | static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) | 
|  | 1637 | { | 
|  | 1638 | unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG); | 
|  | 1639 | temp &= ~GPIO_CFG_EEPR_EN_; | 
|  | 1640 | smsc911x_reg_write(pdata, GPIO_CFG, temp); | 
|  | 1641 | msleep(1); | 
|  | 1642 | } | 
|  | 1643 |  | 
|  | 1644 | static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) | 
|  | 1645 | { | 
|  | 1646 | int timeout = 100; | 
|  | 1647 | u32 e2cmd; | 
|  | 1648 |  | 
|  | 1649 | SMSC_TRACE(DRV, "op 0x%08x", op); | 
|  | 1650 | if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { | 
|  | 1651 | SMSC_WARNING(DRV, "Busy at start"); | 
|  | 1652 | return -EBUSY; | 
|  | 1653 | } | 
|  | 1654 |  | 
|  | 1655 | e2cmd = op | E2P_CMD_EPC_BUSY_; | 
|  | 1656 | smsc911x_reg_write(pdata, E2P_CMD, e2cmd); | 
|  | 1657 |  | 
|  | 1658 | do { | 
|  | 1659 | msleep(1); | 
|  | 1660 | e2cmd = smsc911x_reg_read(pdata, E2P_CMD); | 
| Roel Kluin | 2cf0dbe | 2009-02-20 00:52:19 -0800 | [diff] [blame] | 1661 | } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1662 |  | 
|  | 1663 | if (!timeout) { | 
|  | 1664 | SMSC_TRACE(DRV, "TIMED OUT"); | 
|  | 1665 | return -EAGAIN; | 
|  | 1666 | } | 
|  | 1667 |  | 
|  | 1668 | if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { | 
|  | 1669 | SMSC_TRACE(DRV, "Error occured during eeprom operation"); | 
|  | 1670 | return -EINVAL; | 
|  | 1671 | } | 
|  | 1672 |  | 
|  | 1673 | return 0; | 
|  | 1674 | } | 
|  | 1675 |  | 
|  | 1676 | static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, | 
|  | 1677 | u8 address, u8 *data) | 
|  | 1678 | { | 
|  | 1679 | u32 op = E2P_CMD_EPC_CMD_READ_ | address; | 
|  | 1680 | int ret; | 
|  | 1681 |  | 
|  | 1682 | SMSC_TRACE(DRV, "address 0x%x", address); | 
|  | 1683 | ret = smsc911x_eeprom_send_cmd(pdata, op); | 
|  | 1684 |  | 
|  | 1685 | if (!ret) | 
|  | 1686 | data[address] = smsc911x_reg_read(pdata, E2P_DATA); | 
|  | 1687 |  | 
|  | 1688 | return ret; | 
|  | 1689 | } | 
|  | 1690 |  | 
|  | 1691 | static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, | 
|  | 1692 | u8 address, u8 data) | 
|  | 1693 | { | 
|  | 1694 | u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; | 
| Steve Glendinning | 58add9f | 2009-03-26 07:14:36 +0000 | [diff] [blame] | 1695 | u32 temp; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1696 | int ret; | 
|  | 1697 |  | 
|  | 1698 | SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data); | 
|  | 1699 | ret = smsc911x_eeprom_send_cmd(pdata, op); | 
|  | 1700 |  | 
|  | 1701 | if (!ret) { | 
|  | 1702 | op = E2P_CMD_EPC_CMD_WRITE_ | address; | 
|  | 1703 | smsc911x_reg_write(pdata, E2P_DATA, (u32)data); | 
| Steve Glendinning | 58add9f | 2009-03-26 07:14:36 +0000 | [diff] [blame] | 1704 |  | 
|  | 1705 | /* Workaround for hardware read-after-write restriction */ | 
|  | 1706 | temp = smsc911x_reg_read(pdata, BYTE_TEST); | 
|  | 1707 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1708 | ret = smsc911x_eeprom_send_cmd(pdata, op); | 
|  | 1709 | } | 
|  | 1710 |  | 
|  | 1711 | return ret; | 
|  | 1712 | } | 
|  | 1713 |  | 
|  | 1714 | static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) | 
|  | 1715 | { | 
|  | 1716 | return SMSC911X_EEPROM_SIZE; | 
|  | 1717 | } | 
|  | 1718 |  | 
|  | 1719 | static int smsc911x_ethtool_get_eeprom(struct net_device *dev, | 
|  | 1720 | struct ethtool_eeprom *eeprom, u8 *data) | 
|  | 1721 | { | 
|  | 1722 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1723 | u8 eeprom_data[SMSC911X_EEPROM_SIZE]; | 
|  | 1724 | int len; | 
|  | 1725 | int i; | 
|  | 1726 |  | 
|  | 1727 | smsc911x_eeprom_enable_access(pdata); | 
|  | 1728 |  | 
|  | 1729 | len = min(eeprom->len, SMSC911X_EEPROM_SIZE); | 
|  | 1730 | for (i = 0; i < len; i++) { | 
|  | 1731 | int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); | 
|  | 1732 | if (ret < 0) { | 
|  | 1733 | eeprom->len = 0; | 
|  | 1734 | return ret; | 
|  | 1735 | } | 
|  | 1736 | } | 
|  | 1737 |  | 
|  | 1738 | memcpy(data, &eeprom_data[eeprom->offset], len); | 
|  | 1739 | eeprom->len = len; | 
|  | 1740 | return 0; | 
|  | 1741 | } | 
|  | 1742 |  | 
|  | 1743 | static int smsc911x_ethtool_set_eeprom(struct net_device *dev, | 
|  | 1744 | struct ethtool_eeprom *eeprom, u8 *data) | 
|  | 1745 | { | 
|  | 1746 | int ret; | 
|  | 1747 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1748 |  | 
|  | 1749 | smsc911x_eeprom_enable_access(pdata); | 
|  | 1750 | smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); | 
|  | 1751 | ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); | 
|  | 1752 | smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); | 
|  | 1753 |  | 
|  | 1754 | /* Single byte write, according to man page */ | 
|  | 1755 | eeprom->len = 1; | 
|  | 1756 |  | 
|  | 1757 | return ret; | 
|  | 1758 | } | 
|  | 1759 |  | 
| Steve Glendinning | cb5b04f | 2008-12-25 16:41:09 -0800 | [diff] [blame] | 1760 | static const struct ethtool_ops smsc911x_ethtool_ops = { | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1761 | .get_settings = smsc911x_ethtool_getsettings, | 
|  | 1762 | .set_settings = smsc911x_ethtool_setsettings, | 
|  | 1763 | .get_link = ethtool_op_get_link, | 
|  | 1764 | .get_drvinfo = smsc911x_ethtool_getdrvinfo, | 
|  | 1765 | .nway_reset = smsc911x_ethtool_nwayreset, | 
|  | 1766 | .get_msglevel = smsc911x_ethtool_getmsglevel, | 
|  | 1767 | .set_msglevel = smsc911x_ethtool_setmsglevel, | 
|  | 1768 | .get_regs_len = smsc911x_ethtool_getregslen, | 
|  | 1769 | .get_regs = smsc911x_ethtool_getregs, | 
|  | 1770 | .get_eeprom_len = smsc911x_ethtool_get_eeprom_len, | 
|  | 1771 | .get_eeprom = smsc911x_ethtool_get_eeprom, | 
|  | 1772 | .set_eeprom = smsc911x_ethtool_set_eeprom, | 
|  | 1773 | }; | 
|  | 1774 |  | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1775 | static const struct net_device_ops smsc911x_netdev_ops = { | 
|  | 1776 | .ndo_open		= smsc911x_open, | 
|  | 1777 | .ndo_stop		= smsc911x_stop, | 
|  | 1778 | .ndo_start_xmit		= smsc911x_hard_start_xmit, | 
|  | 1779 | .ndo_get_stats		= smsc911x_get_stats, | 
|  | 1780 | .ndo_set_multicast_list	= smsc911x_set_multicast_list, | 
|  | 1781 | .ndo_do_ioctl		= smsc911x_do_ioctl, | 
| Ben Hutchings | 635ecaa | 2009-07-09 17:59:01 +0000 | [diff] [blame] | 1782 | .ndo_change_mtu		= eth_change_mtu, | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1783 | .ndo_validate_addr	= eth_validate_addr, | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1784 | .ndo_set_mac_address 	= smsc911x_set_mac_address, | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1785 | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | 1786 | .ndo_poll_controller	= smsc911x_poll_controller, | 
|  | 1787 | #endif | 
|  | 1788 | }; | 
|  | 1789 |  | 
| Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 1790 | /* copies the current mac address from hardware to dev->dev_addr */ | 
|  | 1791 | static void __devinit smsc911x_read_mac_address(struct net_device *dev) | 
|  | 1792 | { | 
|  | 1793 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1794 | u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); | 
|  | 1795 | u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); | 
|  | 1796 |  | 
|  | 1797 | dev->dev_addr[0] = (u8)(mac_low32); | 
|  | 1798 | dev->dev_addr[1] = (u8)(mac_low32 >> 8); | 
|  | 1799 | dev->dev_addr[2] = (u8)(mac_low32 >> 16); | 
|  | 1800 | dev->dev_addr[3] = (u8)(mac_low32 >> 24); | 
|  | 1801 | dev->dev_addr[4] = (u8)(mac_high16); | 
|  | 1802 | dev->dev_addr[5] = (u8)(mac_high16 >> 8); | 
|  | 1803 | } | 
|  | 1804 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1805 | /* Initializing private device structures, only called from probe */ | 
|  | 1806 | static int __devinit smsc911x_init(struct net_device *dev) | 
|  | 1807 | { | 
|  | 1808 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 1809 | unsigned int byte_test; | 
|  | 1810 |  | 
|  | 1811 | SMSC_TRACE(PROBE, "Driver Parameters:"); | 
|  | 1812 | SMSC_TRACE(PROBE, "LAN base: 0x%08lX", | 
|  | 1813 | (unsigned long)pdata->ioaddr); | 
|  | 1814 | SMSC_TRACE(PROBE, "IRQ: %d", dev->irq); | 
|  | 1815 | SMSC_TRACE(PROBE, "PHY will be autodetected."); | 
|  | 1816 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1817 | spin_lock_init(&pdata->dev_lock); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1818 |  | 
|  | 1819 | if (pdata->ioaddr == 0) { | 
|  | 1820 | SMSC_WARNING(PROBE, "pdata->ioaddr: 0x00000000"); | 
|  | 1821 | return -ENODEV; | 
|  | 1822 | } | 
|  | 1823 |  | 
|  | 1824 | /* Check byte ordering */ | 
|  | 1825 | byte_test = smsc911x_reg_read(pdata, BYTE_TEST); | 
|  | 1826 | SMSC_TRACE(PROBE, "BYTE_TEST: 0x%08X", byte_test); | 
|  | 1827 | if (byte_test == 0x43218765) { | 
|  | 1828 | SMSC_TRACE(PROBE, "BYTE_TEST looks swapped, " | 
|  | 1829 | "applying WORD_SWAP"); | 
|  | 1830 | smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); | 
|  | 1831 |  | 
|  | 1832 | /* 1 dummy read of BYTE_TEST is needed after a write to | 
|  | 1833 | * WORD_SWAP before its contents are valid */ | 
|  | 1834 | byte_test = smsc911x_reg_read(pdata, BYTE_TEST); | 
|  | 1835 |  | 
|  | 1836 | byte_test = smsc911x_reg_read(pdata, BYTE_TEST); | 
|  | 1837 | } | 
|  | 1838 |  | 
|  | 1839 | if (byte_test != 0x87654321) { | 
|  | 1840 | SMSC_WARNING(DRV, "BYTE_TEST: 0x%08X", byte_test); | 
|  | 1841 | if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { | 
|  | 1842 | SMSC_WARNING(PROBE, | 
|  | 1843 | "top 16 bits equal to bottom 16 bits"); | 
|  | 1844 | SMSC_TRACE(PROBE, "This may mean the chip is set " | 
|  | 1845 | "for 32 bit while the bus is reading 16 bit"); | 
|  | 1846 | } | 
|  | 1847 | return -ENODEV; | 
|  | 1848 | } | 
|  | 1849 |  | 
|  | 1850 | /* Default generation to zero (all workarounds apply) */ | 
|  | 1851 | pdata->generation = 0; | 
|  | 1852 |  | 
|  | 1853 | pdata->idrev = smsc911x_reg_read(pdata, ID_REV); | 
|  | 1854 | switch (pdata->idrev & 0xFFFF0000) { | 
|  | 1855 | case 0x01180000: | 
|  | 1856 | case 0x01170000: | 
|  | 1857 | case 0x01160000: | 
|  | 1858 | case 0x01150000: | 
|  | 1859 | /* LAN911[5678] family */ | 
|  | 1860 | pdata->generation = pdata->idrev & 0x0000FFFF; | 
|  | 1861 | break; | 
|  | 1862 |  | 
|  | 1863 | case 0x118A0000: | 
|  | 1864 | case 0x117A0000: | 
|  | 1865 | case 0x116A0000: | 
|  | 1866 | case 0x115A0000: | 
|  | 1867 | /* LAN921[5678] family */ | 
|  | 1868 | pdata->generation = 3; | 
|  | 1869 | break; | 
|  | 1870 |  | 
|  | 1871 | case 0x92100000: | 
|  | 1872 | case 0x92110000: | 
|  | 1873 | case 0x92200000: | 
|  | 1874 | case 0x92210000: | 
|  | 1875 | /* LAN9210/LAN9211/LAN9220/LAN9221 */ | 
|  | 1876 | pdata->generation = 4; | 
|  | 1877 | break; | 
|  | 1878 |  | 
|  | 1879 | default: | 
|  | 1880 | SMSC_WARNING(PROBE, "LAN911x not identified, idrev: 0x%08X", | 
|  | 1881 | pdata->idrev); | 
|  | 1882 | return -ENODEV; | 
|  | 1883 | } | 
|  | 1884 |  | 
|  | 1885 | SMSC_TRACE(PROBE, "LAN911x identified, idrev: 0x%08X, generation: %d", | 
|  | 1886 | pdata->idrev, pdata->generation); | 
|  | 1887 |  | 
|  | 1888 | if (pdata->generation == 0) | 
|  | 1889 | SMSC_WARNING(PROBE, | 
|  | 1890 | "This driver is not intended for this chip revision"); | 
|  | 1891 |  | 
| Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 1892 | /* workaround for platforms without an eeprom, where the mac address | 
|  | 1893 | * is stored elsewhere and set by the bootloader.  This saves the | 
|  | 1894 | * mac address before resetting the device */ | 
|  | 1895 | if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) | 
|  | 1896 | smsc911x_read_mac_address(dev); | 
|  | 1897 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1898 | /* Reset the LAN911x */ | 
|  | 1899 | if (smsc911x_soft_reset(pdata)) | 
|  | 1900 | return -ENODEV; | 
|  | 1901 |  | 
|  | 1902 | /* Disable all interrupt sources until we bring the device up */ | 
|  | 1903 | smsc911x_reg_write(pdata, INT_EN, 0); | 
|  | 1904 |  | 
|  | 1905 | ether_setup(dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1906 | dev->flags |= IFF_MULTICAST; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1907 | netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); | 
| Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1908 | dev->netdev_ops = &smsc911x_netdev_ops; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1909 | dev->ethtool_ops = &smsc911x_ethtool_ops; | 
|  | 1910 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1911 | return 0; | 
|  | 1912 | } | 
|  | 1913 |  | 
|  | 1914 | static int __devexit smsc911x_drv_remove(struct platform_device *pdev) | 
|  | 1915 | { | 
|  | 1916 | struct net_device *dev; | 
|  | 1917 | struct smsc911x_data *pdata; | 
|  | 1918 | struct resource *res; | 
|  | 1919 |  | 
|  | 1920 | dev = platform_get_drvdata(pdev); | 
|  | 1921 | BUG_ON(!dev); | 
|  | 1922 | pdata = netdev_priv(dev); | 
|  | 1923 | BUG_ON(!pdata); | 
|  | 1924 | BUG_ON(!pdata->ioaddr); | 
|  | 1925 | BUG_ON(!pdata->phy_dev); | 
|  | 1926 |  | 
|  | 1927 | SMSC_TRACE(IFDOWN, "Stopping driver."); | 
|  | 1928 |  | 
|  | 1929 | phy_disconnect(pdata->phy_dev); | 
|  | 1930 | pdata->phy_dev = NULL; | 
|  | 1931 | mdiobus_unregister(pdata->mii_bus); | 
|  | 1932 | mdiobus_free(pdata->mii_bus); | 
|  | 1933 |  | 
|  | 1934 | platform_set_drvdata(pdev, NULL); | 
|  | 1935 | unregister_netdev(dev); | 
|  | 1936 | free_irq(dev->irq, dev); | 
|  | 1937 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | 
|  | 1938 | "smsc911x-memory"); | 
|  | 1939 | if (!res) | 
| Steve Glendinning | d452273 | 2008-12-25 16:44:01 -0800 | [diff] [blame] | 1940 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1941 |  | 
| Julia Lawall | 3942453 | 2009-07-04 11:31:47 +0000 | [diff] [blame] | 1942 | release_mem_region(res->start, resource_size(res)); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1943 |  | 
|  | 1944 | iounmap(pdata->ioaddr); | 
|  | 1945 |  | 
|  | 1946 | free_netdev(dev); | 
|  | 1947 |  | 
|  | 1948 | return 0; | 
|  | 1949 | } | 
|  | 1950 |  | 
|  | 1951 | static int __devinit smsc911x_drv_probe(struct platform_device *pdev) | 
|  | 1952 | { | 
|  | 1953 | struct net_device *dev; | 
|  | 1954 | struct smsc911x_data *pdata; | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1955 | struct smsc911x_platform_config *config = pdev->dev.platform_data; | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1956 | struct resource *res, *irq_res; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1957 | unsigned int intcfg = 0; | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1958 | int res_size, irq_flags; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1959 | int retval; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1960 |  | 
|  | 1961 | pr_info("%s: Driver version %s.\n", SMSC_CHIPNAME, SMSC_DRV_VERSION); | 
|  | 1962 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1963 | /* platform data specifies irq & dynamic bus configuration */ | 
|  | 1964 | if (!pdev->dev.platform_data) { | 
|  | 1965 | pr_warning("%s: platform_data not provided\n", SMSC_CHIPNAME); | 
|  | 1966 | retval = -ENODEV; | 
|  | 1967 | goto out_0; | 
|  | 1968 | } | 
|  | 1969 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1970 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | 
|  | 1971 | "smsc911x-memory"); | 
|  | 1972 | if (!res) | 
|  | 1973 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | 1974 | if (!res) { | 
|  | 1975 | pr_warning("%s: Could not allocate resource.\n", | 
|  | 1976 | SMSC_CHIPNAME); | 
|  | 1977 | retval = -ENODEV; | 
|  | 1978 | goto out_0; | 
|  | 1979 | } | 
| Julia Lawall | 3942453 | 2009-07-04 11:31:47 +0000 | [diff] [blame] | 1980 | res_size = resource_size(res); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1981 |  | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1982 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
|  | 1983 | if (!irq_res) { | 
|  | 1984 | pr_warning("%s: Could not allocate irq resource.\n", | 
|  | 1985 | SMSC_CHIPNAME); | 
|  | 1986 | retval = -ENODEV; | 
|  | 1987 | goto out_0; | 
|  | 1988 | } | 
|  | 1989 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1990 | if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { | 
|  | 1991 | retval = -EBUSY; | 
|  | 1992 | goto out_0; | 
|  | 1993 | } | 
|  | 1994 |  | 
|  | 1995 | dev = alloc_etherdev(sizeof(struct smsc911x_data)); | 
|  | 1996 | if (!dev) { | 
|  | 1997 | pr_warning("%s: Could not allocate device.\n", SMSC_CHIPNAME); | 
|  | 1998 | retval = -ENOMEM; | 
|  | 1999 | goto out_release_io_1; | 
|  | 2000 | } | 
|  | 2001 |  | 
|  | 2002 | SET_NETDEV_DEV(dev, &pdev->dev); | 
|  | 2003 |  | 
|  | 2004 | pdata = netdev_priv(dev); | 
|  | 2005 |  | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 2006 | dev->irq = irq_res->start; | 
|  | 2007 | irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2008 | pdata->ioaddr = ioremap_nocache(res->start, res_size); | 
|  | 2009 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2010 | /* copy config parameters across to pdata */ | 
|  | 2011 | memcpy(&pdata->config, config, sizeof(pdata->config)); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2012 |  | 
|  | 2013 | pdata->dev = dev; | 
|  | 2014 | pdata->msg_enable = ((1 << debug) - 1); | 
|  | 2015 |  | 
|  | 2016 | if (pdata->ioaddr == NULL) { | 
|  | 2017 | SMSC_WARNING(PROBE, | 
|  | 2018 | "Error smsc911x base address invalid"); | 
|  | 2019 | retval = -ENOMEM; | 
|  | 2020 | goto out_free_netdev_2; | 
|  | 2021 | } | 
|  | 2022 |  | 
|  | 2023 | retval = smsc911x_init(dev); | 
|  | 2024 | if (retval < 0) | 
|  | 2025 | goto out_unmap_io_3; | 
|  | 2026 |  | 
|  | 2027 | /* configure irq polarity and type before connecting isr */ | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2028 | if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2029 | intcfg |= INT_CFG_IRQ_POL_; | 
|  | 2030 |  | 
| Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2031 | if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2032 | intcfg |= INT_CFG_IRQ_TYPE_; | 
|  | 2033 |  | 
|  | 2034 | smsc911x_reg_write(pdata, INT_CFG, intcfg); | 
|  | 2035 |  | 
|  | 2036 | /* Ensure interrupts are globally disabled before connecting ISR */ | 
|  | 2037 | smsc911x_reg_write(pdata, INT_EN, 0); | 
|  | 2038 | smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); | 
|  | 2039 |  | 
| Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 2040 | retval = request_irq(dev->irq, smsc911x_irqhandler, | 
| Steve Glendinning | e81259b | 2009-01-27 06:51:10 +0000 | [diff] [blame] | 2041 | irq_flags | IRQF_SHARED, dev->name, dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2042 | if (retval) { | 
|  | 2043 | SMSC_WARNING(PROBE, | 
|  | 2044 | "Unable to claim requested irq: %d", dev->irq); | 
|  | 2045 | goto out_unmap_io_3; | 
|  | 2046 | } | 
|  | 2047 |  | 
|  | 2048 | platform_set_drvdata(pdev, dev); | 
|  | 2049 |  | 
|  | 2050 | retval = register_netdev(dev); | 
|  | 2051 | if (retval) { | 
|  | 2052 | SMSC_WARNING(PROBE, | 
|  | 2053 | "Error %i registering device", retval); | 
|  | 2054 | goto out_unset_drvdata_4; | 
|  | 2055 | } else { | 
|  | 2056 | SMSC_TRACE(PROBE, "Network interface: \"%s\"", dev->name); | 
|  | 2057 | } | 
|  | 2058 |  | 
|  | 2059 | spin_lock_init(&pdata->mac_lock); | 
|  | 2060 |  | 
|  | 2061 | retval = smsc911x_mii_init(pdev, dev); | 
|  | 2062 | if (retval) { | 
|  | 2063 | SMSC_WARNING(PROBE, | 
|  | 2064 | "Error %i initialising mii", retval); | 
|  | 2065 | goto out_unregister_netdev_5; | 
|  | 2066 | } | 
|  | 2067 |  | 
|  | 2068 | spin_lock_irq(&pdata->mac_lock); | 
|  | 2069 |  | 
|  | 2070 | /* Check if mac address has been specified when bringing interface up */ | 
|  | 2071 | if (is_valid_ether_addr(dev->dev_addr)) { | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 2072 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2073 | SMSC_TRACE(PROBE, "MAC Address is specified by configuration"); | 
|  | 2074 | } else { | 
|  | 2075 | /* Try reading mac address from device. if EEPROM is present | 
|  | 2076 | * it will already have been set */ | 
| Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 2077 | smsc911x_read_mac_address(dev); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2078 |  | 
|  | 2079 | if (is_valid_ether_addr(dev->dev_addr)) { | 
|  | 2080 | /* eeprom values are valid  so use them */ | 
|  | 2081 | SMSC_TRACE(PROBE, | 
|  | 2082 | "Mac Address is read from LAN911x EEPROM"); | 
|  | 2083 | } else { | 
|  | 2084 | /* eeprom values are invalid, generate random MAC */ | 
|  | 2085 | random_ether_addr(dev->dev_addr); | 
| Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 2086 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2087 | SMSC_TRACE(PROBE, | 
|  | 2088 | "MAC Address is set to random_ether_addr"); | 
|  | 2089 | } | 
|  | 2090 | } | 
|  | 2091 |  | 
|  | 2092 | spin_unlock_irq(&pdata->mac_lock); | 
|  | 2093 |  | 
| Steve Glendinning | 63a2ebb | 2009-03-19 00:24:45 +0000 | [diff] [blame] | 2094 | dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2095 |  | 
|  | 2096 | return 0; | 
|  | 2097 |  | 
|  | 2098 | out_unregister_netdev_5: | 
|  | 2099 | unregister_netdev(dev); | 
|  | 2100 | out_unset_drvdata_4: | 
|  | 2101 | platform_set_drvdata(pdev, NULL); | 
|  | 2102 | free_irq(dev->irq, dev); | 
|  | 2103 | out_unmap_io_3: | 
|  | 2104 | iounmap(pdata->ioaddr); | 
|  | 2105 | out_free_netdev_2: | 
|  | 2106 | free_netdev(dev); | 
|  | 2107 | out_release_io_1: | 
| Julia Lawall | 3942453 | 2009-07-04 11:31:47 +0000 | [diff] [blame] | 2108 | release_mem_region(res->start, resource_size(res)); | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2109 | out_0: | 
|  | 2110 | return retval; | 
|  | 2111 | } | 
|  | 2112 |  | 
| Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2113 | #ifdef CONFIG_PM | 
|  | 2114 | /* This implementation assumes the devices remains powered on its VDDVARIO | 
|  | 2115 | * pins during suspend. */ | 
|  | 2116 |  | 
|  | 2117 | static int smsc911x_suspend(struct platform_device *pdev, pm_message_t state) | 
|  | 2118 | { | 
|  | 2119 | struct net_device *dev = platform_get_drvdata(pdev); | 
|  | 2120 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 2121 |  | 
|  | 2122 | /* enable wake on LAN, energy detection and the external PME | 
|  | 2123 | * signal. */ | 
|  | 2124 | smsc911x_reg_write(pdata, PMT_CTRL, | 
|  | 2125 | PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | | 
|  | 2126 | PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); | 
|  | 2127 |  | 
|  | 2128 | return 0; | 
|  | 2129 | } | 
|  | 2130 |  | 
|  | 2131 | static int smsc911x_resume(struct platform_device *pdev) | 
|  | 2132 | { | 
|  | 2133 | struct net_device *dev = platform_get_drvdata(pdev); | 
|  | 2134 | struct smsc911x_data *pdata = netdev_priv(dev); | 
|  | 2135 | unsigned int to = 100; | 
|  | 2136 |  | 
|  | 2137 | /* Note 3.11 from the datasheet: | 
|  | 2138 | * 	"When the LAN9220 is in a power saving state, a write of any | 
|  | 2139 | * 	 data to the BYTE_TEST register will wake-up the device." | 
|  | 2140 | */ | 
|  | 2141 | smsc911x_reg_write(pdata, BYTE_TEST, 0); | 
|  | 2142 |  | 
|  | 2143 | /* poll the READY bit in PMT_CTRL. Any other access to the device is | 
|  | 2144 | * forbidden while this bit isn't set. Try for 100ms and return -EIO | 
|  | 2145 | * if it failed. */ | 
|  | 2146 | while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) | 
|  | 2147 | udelay(1000); | 
|  | 2148 |  | 
|  | 2149 | return (to == 0) ? -EIO : 0; | 
|  | 2150 | } | 
|  | 2151 |  | 
|  | 2152 | #else | 
|  | 2153 | #define smsc911x_suspend	NULL | 
|  | 2154 | #define smsc911x_resume		NULL | 
|  | 2155 | #endif | 
|  | 2156 |  | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2157 | static struct platform_driver smsc911x_driver = { | 
|  | 2158 | .probe = smsc911x_drv_probe, | 
| Mike Frysinger | df911e2 | 2009-06-05 14:37:20 +0000 | [diff] [blame] | 2159 | .remove = __devexit_p(smsc911x_drv_remove), | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2160 | .driver = { | 
|  | 2161 | .name = SMSC_CHIPNAME, | 
|  | 2162 | }, | 
| Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2163 | .suspend = smsc911x_suspend, | 
|  | 2164 | .resume = smsc911x_resume, | 
| Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2165 | }; | 
|  | 2166 |  | 
|  | 2167 | /* Entry point for loading the module */ | 
|  | 2168 | static int __init smsc911x_init_module(void) | 
|  | 2169 | { | 
|  | 2170 | return platform_driver_register(&smsc911x_driver); | 
|  | 2171 | } | 
|  | 2172 |  | 
|  | 2173 | /* entry point for unloading the module */ | 
|  | 2174 | static void __exit smsc911x_cleanup_module(void) | 
|  | 2175 | { | 
|  | 2176 | platform_driver_unregister(&smsc911x_driver); | 
|  | 2177 | } | 
|  | 2178 |  | 
|  | 2179 | module_init(smsc911x_init_module); | 
|  | 2180 | module_exit(smsc911x_cleanup_module); |