Gitiles
Code Review Sign In
gerrit-public.fairphone.software / fp2-dev / kernel / msm / f901b8c46fa9748b9d6836e9b158cf7be89447f1 / . / arch / powerpc / boot / dts / mpc8360emds.dts
blob: 9022192155b95a55385ecdf53a6711ab59d6cc49 [file] [log] [blame]
Li Yang7a234d02006-10-02 20:10:10 -0500[diff] [blame]1/*
2 * MPC8360E EMDS Device Tree Source
3 *
4 * Copyright 2006 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12
13/*
14/memreserve/ 00000000 1000000;
15*/
16
17/ {
18 model = "MPC8360EPB";
19 compatible = "MPC83xx";
20 #address-cells = <1>;
21 #size-cells = <1>;
22 linux,phandle = <100>;
23
24 cpus {
25 #cpus = <1>;
26 #address-cells = <1>;
27 #size-cells = <0>;
28 linux,phandle = <200>;
29
30 PowerPC,8360@0 {
31 device_type = "cpu";
32 reg = <0>;
33 d-cache-line-size = <20>; // 32 bytes
34 i-cache-line-size = <20>; // 32 bytes
35 d-cache-size = <8000>; // L1, 32K
36 i-cache-size = <8000>; // L1, 32K
37 timebase-frequency = <3EF1480>;
38 bus-frequency = <FBC5200>;
39 clock-frequency = <1F78A400>;
40 32-bit;
41 linux,phandle = <201>;
42 linux,boot-cpu;
43 };
44 };
45
46 memory {
47 device_type = "memory";
48 linux,phandle = <300>;
49 reg = <00000000 10000000>;
50 };
51
52 bcsr@f8000000 {
53 device_type = "board-control";
54 reg = <f8000000 8000>;
55 };
56
57 soc8360@e0000000 {
58 #address-cells = <1>;
59 #size-cells = <1>;
60 #interrupt-cells = <2>;
61 device_type = "soc";
62 ranges = <0 e0000000 00100000>;
63 reg = <e0000000 00000200>;
64 bus-frequency = <FBC5200>;
65
66 wdt@200 {
67 device_type = "watchdog";
68 compatible = "mpc83xx_wdt";
69 reg = <200 100>;
70 };
71
72 i2c@3000 {
73 device_type = "i2c";
74 compatible = "fsl-i2c";
75 reg = <3000 100>;
76 interrupts = <e 8>;
77 interrupt-parent = <700>;
78 dfsrr;
79 };
80
81 i2c@3100 {
82 device_type = "i2c";
83 compatible = "fsl-i2c";
84 reg = <3100 100>;
85 interrupts = <f 8>;
86 interrupt-parent = <700>;
87 dfsrr;
88 };
89
90 serial@4500 {
91 device_type = "serial";
92 compatible = "ns16550";
93 reg = <4500 100>;
94 clock-frequency = <FBC5200>;
95 interrupts = <9 8>;
96 interrupt-parent = <700>;
97 };
98
99 serial@4600 {
100 device_type = "serial";
101 compatible = "ns16550";
102 reg = <4600 100>;
103 clock-frequency = <FBC5200>;
104 interrupts = <a 8>;
105 interrupt-parent = <700>;
106 };
107
108 crypto@30000 {
109 device_type = "crypto";
110 model = "SEC2";
111 compatible = "talitos";
112 reg = <30000 10000>;
113 interrupts = <b 8>;
114 interrupt-parent = <700>;
115 num-channels = <4>;
116 channel-fifo-len = <18>;
117 exec-units-mask = <0000007e>;
118 /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
119 descriptor-types-mask = <01010ebf>;
120 };
121
122 pci@8500 {
123 linux,phandle = <8500>;
124 interrupt-map-mask = <f800 0 0 7>;
125 interrupt-map = <
126
127 /* IDSEL 0x11 AD17 */
128 8800 0 0 1 700 14 8
129 8800 0 0 2 700 15 8
130 8800 0 0 3 700 16 8
131 8800 0 0 4 700 17 8
132
133 /* IDSEL 0x12 AD18 */
134 9000 0 0 1 700 16 8
135 9000 0 0 2 700 17 8
136 9000 0 0 3 700 14 8
137 9000 0 0 4 700 15 8
138
139 /* IDSEL 0x13 AD19 */
140 9800 0 0 1 700 17 8
141 9800 0 0 2 700 14 8
142 9800 0 0 3 700 15 8
143 9800 0 0 4 700 16 8
144
145 /* IDSEL 0x15 AD21*/
146 a800 0 0 1 700 14 8
147 a800 0 0 2 700 15 8
148 a800 0 0 3 700 16 8
149 a800 0 0 4 700 17 8
150
151 /* IDSEL 0x16 AD22*/
152 b000 0 0 1 700 17 8
153 b000 0 0 2 700 14 8
154 b000 0 0 3 700 15 8
155 b000 0 0 4 700 16 8
156
157 /* IDSEL 0x17 AD23*/
158 b800 0 0 1 700 16 8
159 b800 0 0 2 700 17 8
160 b800 0 0 3 700 14 8
161 b800 0 0 4 700 15 8
162
163 /* IDSEL 0x18 AD24*/
164 c000 0 0 1 700 15 8
165 c000 0 0 2 700 16 8
166 c000 0 0 3 700 17 8
167 c000 0 0 4 700 14 8>;
168 interrupt-parent = <700>;
169 interrupts = <42 8>;
170 bus-range = <0 0>;
171 ranges = <02000000 0 a0000000 a0000000 0 10000000
172 42000000 0 80000000 80000000 0 10000000
173 01000000 0 00000000 e2000000 0 00100000>;
174 clock-frequency = <3f940aa>;
175 #interrupt-cells = <1>;
176 #size-cells = <2>;
177 #address-cells = <3>;
178 reg = <8500 100>;
179 compatible = "83xx";
180 device_type = "pci";
181 };
182
183 pic@700 {
184 linux,phandle = <700>;
185 interrupt-controller;
186 #address-cells = <0>;
187 #interrupt-cells = <2>;
188 reg = <700 100>;
189 built-in;
190 device_type = "ipic";
191 };
192
193 par_io@1400 {
194 reg = <1400 100>;
195 device_type = "par_io";
196 num-ports = <7>;
197
198 ucc_pin@01 {
199 linux,phandle = <140001>;
200 pio-map = <
201 /* port pin dir open_drain assignment has_irq */
202 0 3 1 0 1 0 /* TxD0 */
203 0 4 1 0 1 0 /* TxD1 */
204 0 5 1 0 1 0 /* TxD2 */
205 0 6 1 0 1 0 /* TxD3 */
206 1 6 1 0 3 0 /* TxD4 */
207 1 7 1 0 1 0 /* TxD5 */
208 1 9 1 0 2 0 /* TxD6 */
209 1 a 1 0 2 0 /* TxD7 */
210 0 9 2 0 1 0 /* RxD0 */
211 0 a 2 0 1 0 /* RxD1 */
212 0 b 2 0 1 0 /* RxD2 */
213 0 c 2 0 1 0 /* RxD3 */
214 0 d 2 0 1 0 /* RxD4 */
215 1 1 2 0 2 0 /* RxD5 */
216 1 0 2 0 2 0 /* RxD6 */
217 1 4 2 0 2 0 /* RxD7 */
218 0 7 1 0 1 0 /* TX_EN */
219 0 8 1 0 1 0 /* TX_ER */
220 0 f 2 0 1 0 /* RX_DV */
221 0 10 2 0 1 0 /* RX_ER */
222 0 0 2 0 1 0 /* RX_CLK */
223 2 9 1 0 3 0 /* GTX_CLK - CLK10 */
224 2 8 2 0 1 0>; /* GTX125 - CLK9 */
225 };
226 ucc_pin@02 {
227 linux,phandle = <140002>;
228 pio-map = <
229 /* port pin dir open_drain assignment has_irq */
230 0 11 1 0 1 0 /* TxD0 */
231 0 12 1 0 1 0 /* TxD1 */
232 0 13 1 0 1 0 /* TxD2 */
233 0 14 1 0 1 0 /* TxD3 */
234 1 2 1 0 1 0 /* TxD4 */
235 1 3 1 0 2 0 /* TxD5 */
236 1 5 1 0 3 0 /* TxD6 */
237 1 8 1 0 3 0 /* TxD7 */
238 0 17 2 0 1 0 /* RxD0 */
239 0 18 2 0 1 0 /* RxD1 */
240 0 19 2 0 1 0 /* RxD2 */
241 0 1a 2 0 1 0 /* RxD3 */
242 0 1b 2 0 1 0 /* RxD4 */
243 1 c 2 0 2 0 /* RxD5 */
244 1 d 2 0 3 0 /* RxD6 */
245 1 b 2 0 2 0 /* RxD7 */
246 0 15 1 0 1 0 /* TX_EN */
247 0 16 1 0 1 0 /* TX_ER */
248 0 1d 2 0 1 0 /* RX_DV */
249 0 1e 2 0 1 0 /* RX_ER */
250 0 1f 2 0 1 0 /* RX_CLK */
251 2 2 1 0 2 0 /* GTX_CLK - CLK10 */
252 2 3 2 0 1 0 /* GTX125 - CLK4 */
253 0 1 3 0 2 0 /* MDIO */
254 0 2 1 0 1 0>; /* MDC */
255 };
256
257 };
258 };
259
260 qe@e0100000 {
261 #address-cells = <1>;
262 #size-cells = <1>;
263 device_type = "qe";
264 model = "QE";
265 ranges = <0 e0100000 00100000>;
266 reg = <e0100000 480>;
267 brg-frequency = <0>;
268 bus-frequency = <179A7B00>;
269
270 muram@10000 {
271 device_type = "muram";
272 ranges = <0 00010000 0000c000>;
273
274 data-only@0{
275 reg = <0 c000>;
276 };
277 };
278
279 spi@4c0 {
280 device_type = "spi";
281 compatible = "fsl_spi";
282 reg = <4c0 40>;
283 interrupts = <2>;
284 interrupt-parent = <80>;
285 mode = "cpu";
286 };
287
288 spi@500 {
289 device_type = "spi";
290 compatible = "fsl_spi";
291 reg = <500 40>;
292 interrupts = <1>;
293 interrupt-parent = <80>;
294 mode = "cpu";
295 };
296
297 usb@6c0 {
298 device_type = "usb";
299 compatible = "qe_udc";
300 reg = <6c0 40 8B00 100>;
301 interrupts = <b>;
302 interrupt-parent = <80>;
303 mode = "slave";
304 };
305
306 ucc@2000 {
307 device_type = "network";
308 compatible = "ucc_geth";
309 model = "UCC";
310 device-id = <1>;
311 reg = <2000 200>;
312 interrupts = <20>;
313 interrupt-parent = <80>;
314 mac-address = [ 00 04 9f 00 23 23 ];
315 rx-clock = <0>;
316 tx-clock = <19>;
317 phy-handle = <212000>;
318 pio-handle = <140001>;
319 };
320
321 ucc@3000 {
322 device_type = "network";
323 compatible = "ucc_geth";
324 model = "UCC";
325 device-id = <2>;
326 reg = <3000 200>;
327 interrupts = <21>;
328 interrupt-parent = <80>;
329 mac-address = [ 00 11 22 33 44 55 ];
330 rx-clock = <0>;
331 tx-clock = <14>;
332 phy-handle = <212001>;
333 pio-handle = <140002>;
334 };
335
336 mdio@2120 {
337 #address-cells = <1>;
338 #size-cells = <0>;
339 reg = <2120 18>;
340 device_type = "mdio";
341 compatible = "ucc_geth_phy";
342
343 ethernet-phy@00 {
344 linux,phandle = <212000>;
345 interrupt-parent = <700>;
346 interrupts = <11 2>;
347 reg = <0>;
348 device_type = "ethernet-phy";
349 interface = <6>; //ENET_1000_GMII
350 };
351 ethernet-phy@01 {
352 linux,phandle = <212001>;
353 interrupt-parent = <700>;
354 interrupts = <12 2>;
355 reg = <1>;
356 device_type = "ethernet-phy";
357 interface = <6>;
358 };
359 };
360
361 qeic@80 {
362 linux,phandle = <80>;
363 interrupt-controller;
364 device_type = "qeic";
365 #address-cells = <0>;
366 #interrupt-cells = <1>;
367 reg = <80 80>;
368 built-in;
369 big-endian;
370 interrupts = <20 8 21 8>; //high:32 low:33
371 interrupt-parent = <700>;
372 };
373
374 };
375};